2943 files changed, 116691 insertions, 77693 deletions

diff --git a/.gitignore b/.gitignore
index 96c1b4a7a..e13fc9632 100644
--- a/.gitignore
+++ b/.gitignore
@@ -11,6 +11,7 @@
 *.a
 *.o
 *~
+*.swp
 *.patch
 
 #
@@ -46,9 +47,16 @@ patches-*
 patches
 series
 
+# gdb files
+.gdb_history
+
 # cscope files
 cscope.*
 
+# tags files
+/ctags
+/etags
+
 # OneNAND IPL files
 /onenand_ipl/onenand-ipl*
 /onenand_ipl/board/*/onenand*
diff --git a/CHANGELOG b/CHANGELOG
index cc08e1110..9af36c123 100644
--- a/CHANGELOG
+++ b/CHANGELOG
@@ -1,3 +1,9522 @@
+commit 9e2a79b4c585ad31138fb90b68fd0234d64a8da8
+Author: Wolfgang Denk <wd@denx.de>
+Date:	Tue Dec 16 23:13:46 2008 +0100
+
+    include/configs/at91cap9adk.h: fix typo.
+
+    Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 45ca04f2377361593151d2d4da51f8ba4832d233
+Author: Wolfgang Denk <wd@denx.de>
+Date:	Tue Dec 16 22:32:25 2008 +0100
+
+    board/trab/memory.c: Fix compile problems.
+
+    Apply changes from commit 44b4dbed to board/trab/memory.c, too.
+
+    Actually we'd need a major cleanup here - as it turns out,
+    board/trab/memory.c is more or less a verbatim copy of
+    post/drivers/memory.c ... but then, trab is EOL anyway,r
+    so this is not worth the effort.
+
+    Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 584eedab66d0828f2d571a24b10526c4e65f547b
+Author: Ilya Yanok <yanok@emcraft.com>
+Date:	Thu Dec 11 05:51:57 2008 +0300
+
+    jffs2: include <linux/mtd/compat.h> instead of defining own min_t
+
+    Include <linux/mtd/compat.h> header for min_t definition instead of
+    providing our own one. Removes warnings in case of OneNAND support
+    enabled.
+
+    Although I thinks it's a bit silly to include <linux/mtd/compat.h>
+    just for min_t...
+
+    Signed-off-by: Ilya Yanok <yanok@emcraft.com>
+    Acked-by: Stefan Roese <sr@denx.de>
+
+commit b1ffecec37b57a59c139042267faac458e5324e9
+Author: Becky Bruce <beckyb@kernel.crashing.org>
+Date:	Wed Dec 3 23:04:37 2008 -0600
+
+    powerpc: fix io.h build warning with CONFIG_PHYS_64BIT
+
+    Casting a pointer to a phys_addr_t when it's an unsigned long long
+    on a 32-bit system without first casting to a non-pointer type
+    generates a compiler warning. Fix this.
+
+    Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org>
+
+commit 6cdadcb3f1b6eac4a1c4256acaa1438413f95351
+Author: Wolfgang Denk <wd@denx.de>
+Date:	Tue Dec 16 16:22:50 2008 +0100
+
+    trab: make trab_fkt standalone code independent of libgcc
+
+    Use our own local functions in lib_arm/ instead.
+
+    Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit aa1bcca3d2e22af4dea9f02132f9b56a30378ded
+Author: Wolfgang Denk <wd@denx.de>
+Date:	Tue Dec 16 14:44:06 2008 +0100
+
+    post/Makefile: fix dependency problem with parallel builds
+
+    Parallel builds (using "make -jN") would occasionally fail with error
+    messages like
+	ppc_4xxFP-objdump: string.o: File format not recognized
+    or
+	post/libpost.a(cpu.o): In function `cpu_post_test':
+	/home/wd/git/u-boot/work/post/lib_ppc/cpu.c:130: undefined reference to `cpu_post_test_string'
+    or similar. We now make sure to run the 'postdeps" step before
+    attempting to build the specific POST libraries.
+
+    Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 4a0f7538c5c0805fd9a791967bbabacc41deadd9
+Author: Wolfgang Denk <wd@denx.de>
+Date:	Tue Dec 16 14:41:02 2008 +0100
+
+    Makefile: fix dependency problem with parallel builds
+
+    Parallel builds (using "make -jN") would occasionally fail with error
+    messages like
+	include/autoconf.mk:212: *** missing separator.  Stop.
+    Line numbers and affected boards were changing. Obviously some
+    Makefiles included autoconf.mk while it was still being written to.
+    As a fix, we now write to a temporary file first and then rename it,
+    so that it is really ready to use as soon as it appears.
+
+    Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 455ae7e87f67c44e6aea68865c83acadd3fcd36c
+Author: Wolfgang Denk <wd@denx.de>
+Date:	Tue Dec 16 01:02:17 2008 +0100
+
+    Coding style cleanup, update CHANGELOG.
+
+    Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 84bc72d90c505fec3ef4b693995407a0bd4064e5
+Author: Mike Frysinger <vapier@gentoo.org>
+Date:	Thu Dec 11 18:39:08 2008 -0500
+
+    spi/stmicro: fix debug() display of cmd
+
+    The stmicro_wait_ready() func tries to show the actual opcode that was sent
+    to the device, but instead it displays the array pointer.  Fix it to pull
+    out the opcode from the start of the array.
+
+    Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 5b3375ac8c36c29c87abb132fede0509eb21e5c9
+Author: Mike Frysinger <vapier@gentoo.org>
+Date:	Thu Dec 11 06:23:37 2008 -0500
+
+    env_sf: support embedded environments
+
+    If both CONFIG_ENV_SECT_SIZE and CONFIG_ENV_SIZE are defined, and the sect
+    size is larger than the env size, then it means the env is embedded in a
+    block.  So we have to save/restore the part of the sector which is not the
+    environment.  Previously, saving the environment in SPI flash in this
+    setup would probably brick the board as the rest of the sector tends to
+    contain actual U-Boot data/code.
+
+    Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+    Acked-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+
+commit ecf5f077c8e77454f532eaac3e3afb7cfc48c62d
+Author: Timur Tabi <timur@freescale.com>
+Date:	Wed Dec 3 11:28:30 2008 -0600
+
+    i2c: merge all i2c_reg_read() and i2c_reg_write() into inline functions
+
+    All implementations of the functions i2c_reg_read() and
+    i2c_reg_write() are identical. We can save space and simplify the
+    code by converting these functions into inlines and putting them in
+    i2c.h.
+
+    Signed-off-by: Timur Tabi <timur@freescale.com>
+    Acked-By: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit e39cd81c44740d7355d277ed3d38536cbe1e003d
+Author: Dave Liu <daveliu@freescale.com>
+Date:	Fri Dec 5 15:36:14 2008 +0800
+
+    lib_ppc: rework the flush_cache
+
+    - It is possible to miss flush/invalidate the last
+      cache line, we fix it at here.
+    - add the volatile and memory clobber.
+
+    They are pointed by Scott Wood.
+
+    Signed-off-by: Dave Liu <daveliu@freescale.com>
+
+commit 63240ba88cd6a220057a0f28e5bf97f5b17ac84b
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date:	Sat Dec 13 17:20:28 2008 -0600
+
+    Introduce addr_map library
+
+    Add a library that helps in translating between virtual and physical
+    addresses.	This library can be useful as a simple means to implement
+    map_physmem() and virt_to_phys() for platforms that need functionality
+    beyond the simple 1:1 mapping.
+
+    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 65e43a10631537dcb92c302d36301a12308216c3
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date:	Sat Dec 13 17:20:27 2008 -0600
+
+    Introduce virt_to_phys()
+
+    virt_to_phys() returns the physical address given a virtual. In most
+    cases this will be just the input value as the vast majority of
+    systems run in a 1:1 mode.
+
+    However in systems that are not running this way it should report the
+    physical address or ~0 if no mapping exists for the given virtual
+    address.
+
+    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 45845301af3de8675c1f7bbc815c6de35452605a
+Author: Yuri Tikhonov <yur@emcraft.com>
+Date:	Sun Dec 7 22:12:50 2008 +0100
+
+    POST Make: fix the sub-dir dependencies missing.
+
+    Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
+
+commit 22525779cb51f1bbe4e96fea7b778de1935a5a69
+Author: Martin Michlmayr <tbm@cyrius.com>
+Date:	Wed Aug 6 14:44:05 2008 +0300
+
+    Fix a typo in fw_env.config
+
+    Reported-by: Martin Michlmayr <tbm@cyrius.com>
+    Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit ba490b7761c62b549c222a9723e532dc801a3899
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date:	Mon Dec 1 16:22:45 2008 -0600
+
+    Remove unused CONFIG_ADDR_STREAMING defines
+
+    Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit d16da93430520d3e46c1ab52eedacf36ab7a2311
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date:	Mon Nov 24 11:54:47 2008 -0600
+
+    cmd_mem: Remove unused variable
+
+    Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit 3aed3aa2c128ce9fb39ca3f4e9385a7499e93dbf
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date:	Sun Dec 14 10:29:39 2008 +0100
+
+    Fix new found CFG_
+
+    Also fix some minor typos.
+
+    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+    Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 0e0c862efe7279e9609db74d758cd1b84c6c7209
+Author: Sergei Poselenov <sposelenov@emcraft.com>
+Date:	Fri Sep 19 12:07:34 2008 +0200
+
+    Remove compiler warning: target CPU does not support interworking
+
+    This warning is issued by modern ARM-EABI GCC on non-thumb targets.
+
+    Signed-off-by: Vladimir Panfilov <pvr@emcraft.com>
+    Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
+
+commit cd6734510a9ff0f41c4a73567d4080ea0033d2c1
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date:	Mon Nov 24 13:33:51 2008 +0100
+
+    Fix FIT and FDT support to have CONFIG_OF_LIBFDT and CONFIG_FIT independent
+
+    FDT support is used for both FIT style images and for architectures
+    that can pass a fdt blob to an OS (ppc, m68k, sparc).
+
+    For other architectures and boards which do not pass a fdt blob to an
+    OS but want to use the new uImage format, we just need FIT support.
+
+    Now we can have the 4 following configurations :
+
+    1) FIT only		    CONFIG_FIT
+    2) fdt blob only	    CONFIG_OF_LIBFDT
+    3) both		    CONFIG_OF_LIBFDT & CONFIG_FIT
+    4) none		    none
+
+    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 19ef4f7a6ef3b725aa9fe4b4f5fb676a84160172
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date:	Wed Dec 10 15:13:32 2008 +0100
+
+    ppc4xx: Disable EEPROM write access on PMC440 boards
+
+    This patch disables EEPROM wrtie access by default on PMC440 board.
+
+    Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+
+commit 5b67a1439a73ba6c34007d9ff60a2c6aa90265df
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date:	Wed Dec 10 15:12:56 2008 +0100
+
+    ppc4xx: Fix Ethernet PHY LED configuration on PMC440 boards
+
+    Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+
+commit 71fa0714fe5134bc8718c38d5261d267e88582ba
+Author: Stefan Roese <sr@denx.de>
+Date:	Tue Nov 18 16:36:12 2008 +0100
+
+    MIPS: Flush data cache upon relocation
+
+    This patch now adds a flush to the data cache upon relocation. The
+    current implementation is missing this. Only a comment states that it
+    should be done. So let's really do it now.
+
+    Signed-off-by: Stefan Roese <sr@denx.de>
+    Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+
+commit 44174343688dba32571a34550dba08971c65fef1
+Author: Stefan Roese <sr@denx.de>
+Date:	Tue Nov 18 16:36:22 2008 +0100
+
+    MIPS: Add CONFIG_SKIP_LOWLEVEL_INIT
+
+    This patch adds the CONFIG_SKIP_LOWLEVEL_INIT option to start.S. This
+    enables support for boards where the lowlevel initialization is
+    already done when U-Boot runs (e.g. via OnChip ROM).
+
+    This will be used in the upcoming VCTH board support.
+
+    Signed-off-by: Stefan Roese <sr@denx.de>
+    Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+
+commit db08ecaa6eb8176904b3bae103a85ee8f735dc40
+Author: Stefan Roese <sr@denx.de>
+Date:	Wed Nov 12 13:18:02 2008 +0100
+
+    MIPS: Add board_early_init_f() to init_sequence
+
+    This patch adds the board_early_init_f() call to the MIPS init
+    sequence. A weak dummy implementation is also added which can be
+    overridden by a board specific version.
+
+    This will be used by the upcoming VCTH board support.
+
+    Signed-off-by: Stefan Roese <sr@denx.de>
+    Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+
+commit 9d23fc584c4b7b8bb9ecbee48920b1b04b08fa1b
+Author: Stefan Roese <sr@denx.de>
+Date:	Wed Nov 12 13:18:19 2008 +0100
+
+    MIPS: Add onenand_init() to board.c and move nand_init()
+
+    This patch adds a call to onenand_init() for OneNAND support and moves
+    the nand_init() call to an earlier place, so that the environment can
+    be used from NAND and OneNAND.
+
+    Signed-off-by: Stefan Roese <sr@denx.de>
+    Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+
+commit d8bbc51c7ba9b737a20984333d19fe28a3526431
+Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+Date:	Tue Dec 9 11:32:46 2008 +0900
+
+    sh: Update sh2/sh2a timer
+
+    Renesas SH2/SH2A timer broken.
+    This patch fix timer function.
+
+    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit a319f1496210117b73198e3d889ffffaf6825d00
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date:	Fri Dec 5 07:27:37 2008 +0100
+
+    sh: r2dplus fix register access
+
+    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit 4d4a96055f6917335a89dbdf2e5556fa5ac329f6
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date:	Tue Dec 2 07:40:03 2008 +0100
+
+    sh: r2dplus/lowlevel_init: coding style fix
+
+    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit c54b9a42d8f5ab5b2a039b3a2e6fde8b427745e5
+Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+Date:	Tue Nov 25 11:05:19 2008 +0900
+
+    sh: Changed value of CACHE_OC_NUM_ENTRIES and CACHE_OC_WAY_SHIFT
+
+    SH4 is different a value of CACHE_OC_NUM_ENTRIES and
+    CACHE_OC_WAY_SHIFT every CPU.
+    This patch corrects these values.
+
+    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit e9d5f35497885b3c65d494d09a525d443dcccd3b
+Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+Date:	Thu Nov 20 16:44:42 2008 +0900
+
+    sh: Update sh timer function
+
+    Change to write/readX function and fix timer problem.
+
+    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit b81786cff476c41e332eaeb679158f6527cd67d4
+Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+Date:	Tue Nov 4 11:58:58 2008 +0900
+
+    sh: Migo-R: Update BSC value
+
+    A value of BSC CS4 was wrong, Fixed it.
+
+    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit 5783758fd260a02f44566ad8f29f899565cd0403
+Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+Date:	Mon Nov 17 16:52:09 2008 +0900
+
+    sh: Update ms7722se board config
+
+    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit 15e2697c9f7fb2ba672a1a70f07cd6d9d4e92b51
+Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+Date:	Mon Nov 17 16:53:09 2008 +0900
+
+    sh: Update SuperH serial driver
+
+    The address of SCFSR register is wrong at SH7720/SH7721.
+    This patch fix this.
+
+    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit 9a1d3557dcd47365c12eeab584b822e57d994352
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date:	Tue Nov 11 22:20:15 2008 +0100
+
+    sh: fix rsk7203 and MigoR out of tree build
+
+    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit 1951f847f0a851853871b613ad7cf21a5242226c
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date:	Wed Dec 10 14:41:25 2008 +0100
+
+    ppc4xx: Update TEXT_BASE for CPCI405 boards
+
+    This patch fixes building U-Boot for CPCI405 boards.
+
+    Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+    Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 8c92af7b2fbd60ae87379477f93c7ec9441b7452
+Author: Stefan Roese <sr@denx.de>
+Date:	Tue Dec 9 20:08:01 2008 +0100
+
+    ppc4xx: Remove some features from ALPR to fit into 256k again
+
+    Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 3b089e4f889a2902449d55e081c886ae607cae89
+Author: Stefan Roese <sr@denx.de>
+Date:	Wed Dec 10 10:32:59 2008 +0100
+
+    UBI: Set ubi_dev.type back to DEV_TYPE_NONE upon failing initialization
+
+    With this patch we set the type back to NONE upon failing UBI partition
+    initialization. Otherwise further calls to the UBI subsystem would try
+    to really access the non-existing UBI partition.
+
+    Thanks to Michael Lawnick for pointing this out.
+
+    Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 817329351639a8895cd9b87b33aeff043f3d5a44
+Author: Stefan Roese <sr@denx.de>
+Date:	Wed Dec 10 10:28:33 2008 +0100
+
+    UBI: Return -ENOMEM upon failing malloc
+
+    Return with correct error code (-ENOMEM) from ubi_attach_mtd_dev() upon
+    failing malloc().
+
+    Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 2145188bea2df8f2b47a87ec3071b55027e8d0ae
+Author: Ben Warren <biggerbadderben@gmail.com>
+Date:	Tue Dec 9 23:34:15 2008 -0800
+
+    Fix compile error in building MBX860T.
+
+    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 8fab49ea911fe925392fa5afcc9bc7373a3d0cee
+Author: Michal Simek <monstr@monstr.eu>
+Date:	Tue Nov 25 11:42:20 2008 +0100
+
+    microblaze: Remove XUPV2P board
+
+    ---
+
+    Microblaze platforms use generic settings and to have
+    many platforms is confusing that's why I decided to remove this
+    platform from U-BOOT. ml401 tree is sufficient for covering
+    all Microblaze platforms.
+
+    This change will go through microblaze custodian tree.
+
+commit 99ba6f353582720defff6e6e6761dc455a207d31
+Author: Michal Simek <monstr@monstr.eu>
+Date:	Mon Nov 24 18:25:41 2008 +0100
+
+    microblaze: Remove CONFIG_LIBFDT due to error in common files
+
+commit e7d591e823a991513833af7030468409e25a3b13
+Author: Michal Simek <monstr@monstr.eu>
+Date:	Mon Nov 24 11:43:00 2008 +0100
+
+    microblaze: Fix ml401 uart16550 setting
+
+    Signed-off-by: Michal Simek <monstr@monstr.eu>
+
+commit c85ff0553a8cfbcca51c15b947e1ed55d3810a39
+Author: Michal Simek <monstr@monstr.eu>
+Date:	Mon Nov 24 11:38:22 2008 +0100
+
+    microblaze: Set up relocation is done
+
+commit bcb6dd9187d4b23c748704767bd12d20c829e996
+Author: Mike Frysinger <vapier@gentoo.org>
+Date:	Tue Dec 9 23:20:31 2008 -0500
+
+    tools/netconsole: new script for working with netconsole over UDP
+
+    While the doc/README.NetConsole does have a snippet for people to
+    create their own netcat script, it's a lot easier to make a simple
+    dedicated script and tell people to use it.
+
+    Also spruce it up a bit to make it user friendly.
+
+    Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 8c5170a7d088601d5f30d85093388dab1f1e8ec0
+Author: Sonic Zhang <Sonic.Zhang@analog.com>
+Date:	Tue Dec 9 23:20:18 2008 -0500
+
+    fs/fat: handle FAT on SATA
+
+    The FAT file system driver should also handle FAT on SATA devices.
+
+    Signed-off-by: Sonic Zhang <Sonic.Zhang@analog.com>
+    Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 97a24a78ee6f34b89b821cb70eda1cf34aa11d97
+Author: Jerry Van Baren <gvb.uboot@gmail.com>
+Date:	Mon Nov 24 08:15:02 2008 -0500
+
+    libfdt: Fix redefined uintptr_t warning for USE_HOSTCC
+
+    Compiling U-Boot in an old OS environment (RedHat-7.3  :-)	gives the
+    following warnings from FDT:
+
+    include/libfdt_env.h:50: warning: redefinition of 'uintptr_t'
+    /usr/include/stdint.h:129: warning: 'uintptr_t' previously declared here
+
+    Fix: Protect the definition of uintptr_t when compiling on the host
+    system.
+
+    Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
+
+commit 1fc2b165c51d6f40c8d505f1b3eaefdb6599b17b
+Author: Graeme Russ <graeme.russ@gmail.com>
+Date:	Sat Nov 22 08:43:29 2008 +1100
+
+    Moved sc520 PCI definitions to stand-alone file
+
+    Signed Off By: Graeme Russ <graeme.russ@gmail.com>
+
+commit 1f5070c0c18fa5684bfce09c8abdf10c04ed48fa
+Author: Graeme Russ <graeme.russ@gmail.com>
+Date:	Sat Nov 22 08:43:21 2008 +1100
+
+    Fixed path to sc520 SSI include file
+
+    Signed Off By: Graeme Russ <graeme.russ@gmail.com>
+
+commit d4f70da544c33db3e4fce6473dea4ecca4322545
+Author: Graeme Russ <graeme.russ@gmail.com>
+Date:	Fri Nov 21 06:28:05 2008 +1100
+
+    Fixed build error due to #define of _LINUX_STRING_H_ in 82559_eeprom.c
+
+    Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
+
+commit c034075a713b60e654c64e88e87da29440f31bb4
+Author: Stefan Roese <sr@denx.de>
+Date:	Wed Nov 12 13:30:10 2008 +0100
+
+    serial: Add vcth UART driver
+
+    This patch adds the UART driver for the upcoming VCTH board support.
+
+    Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 142a80ffc3b537a9c45acd2444a42a77f147c602
+Author: Ilya Yanok <yanok@emcraft.com>
+Date:	Thu Nov 13 19:49:36 2008 +0300
+
+    jffs2: cache data_crc results
+
+    As we moved data_crc() invocation from jffs2_1pass_build_lists() to
+    jffs2_1pass_read_inode() data_crc is going to be calculated on each
+    inode access. This patch adds caching of data_crc() results. There
+    is no significant improvement in speed (because of flash access
+    caching added in previous patch I think, crc in RAM is really fast)
+    but this patch impacts memory usage -- every b_node structure uses
+    12 bytes instead of 8.
+
+    Signed-off-by: Alexey Neyman <avn@emcraft.com>
+    Signed-off-by: Ilya Yanok <yanok@emcraft.com>
+
+commit 9b7076229ec6a958bd835ab70745f7676297ce82
+Author: Ilya Yanok <yanok@emcraft.com>
+Date:	Thu Nov 13 19:49:35 2008 +0300
+
+    jffs2: summary support
+
+    This patch adds support for reading fs information from summary
+    node instead of scanning full eraseblock.
+
+    Signed-off-by: Ilya Yanok <yanok@emcraft.com>
+
+commit 70741004dc28946cd82c7af6789c4ddb3fc94526
+Author: Ilya Yanok <yanok@emcraft.com>
+Date:	Thu Nov 13 19:49:34 2008 +0300
+
+    jffs2: add buffer to cache flash accesses
+
+    With this patch JFFS2 code allocates memory buffer of max_totlen size
+    (size of the largest node, calculated during scan time) and uses it to
+    store entire node. Speeds up loading. If malloc fails we use old ways
+    to do things.
+
+    Signed-off-by: Alexey Neyman <avn@emcraft.com>
+    Signed-off-by: Ilya Yanok <yanok@emcraft.com>
+
+commit 8a36d31f72411144ac0412ee7e1880e801acd754
+Author: Ilya Yanok <yanok@emcraft.com>
+Date:	Thu Nov 13 19:49:33 2008 +0300
+
+    jffs2: rewrite jffs2 scanning code based on Linux one
+
+    Rewrites jffs2_1pass_build_lists() function in style of Linux's
+    jffs2_scan_medium() and jffs2_scan_eraseblock().
+    This includes:
+     - Caching flash acceses
+     - Smart dealing with free space
+
+    Signed-off-by: Alexey Neyman <avn@emcraft.com>
+    Signed-off-by: Ilya Yanok <yanok@emcraft.com>
+
+commit e0b5532579eda8b4629f1b4f6e49c3cc60f52237
+Author: Ilya Yanok <yanok@emcraft.com>
+Date:	Thu Nov 13 19:49:32 2008 +0300
+
+    jffs2: add sector_size field to part_info structure
+
+    This patch adds sector_size field to part_info structure (used
+    by new JFFS2 code).
+
+    Signed-off-by: Ilya Yanok <yanok@emcraft.com>
+
+commit f73846956778a7dfee83403ef9747aff77198848
+Author: Ilya Yanok <yanok@emcraft.com>
+Date:	Thu Nov 13 19:49:31 2008 +0300
+
+    jffs2: fix searching for latest version in jffs2_1pass_list_inodes()
+
+    We need to update i_version inside cycle to find really latest version
+    inside jffs2_1pass_list_inodes(). With that fixed we can use isize inside
+    dump_inode() instead of calling expensive jffs2_1pass_read_inode().
+
+    Signed-off-by: Alexey Neyman <avn@emcraft.com>
+    Signed-off-by: Ilya Yanok <yanok@emcraft.com>
+
+commit 1113cb764b3da256ef8a1f9539f4efbe221ff3c4
+Author: Wolfgang Denk <wd@denx.de>
+Date:	Tue Dec 9 23:13:51 2008 +0100
+
+    evb64260: fix "cast to pointer from integer of different size" warnings
+
+    Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit d2776827315c3d469b8cb4cec14d58877798daa2
+Author: Stefan Althoefer <stefan.althoefer@web.de>
+Date:	Sun Dec 7 19:39:11 2008 +0100
+
+    USB: descriptor handling
+
+    Hi,
+
+    I found a bug when working with the u-boot USB subsystem on IXP425 processor
+    (big endian Xscale aka ARMv5).
+    I recognized that the second usb_endpoint_descriptor of the attached memory
+    stick was corrupted.
+
+    The reason for this are the packed structures below (either u-boot and
+    u-boot-usb):
+
+    --------------
+    /* Endpoint descriptor */
+    struct usb_endpoint_descriptor {
+	unsigned char  bLength;
+	unsigned char  bDescriptorType;
+	unsigned char  bEndpointAddress;
+	unsigned char  bmAttributes;
+	unsigned short wMaxPacketSize;
+	unsigned char  bInterval;
+	unsigned char  bRefresh;
+	unsigned char  bSynchAddress;
+
+    } __attribute__ ((packed));
+    /* Interface descriptor */
+    struct usb_interface_descriptor {
+	unsigned char  bLength;
+	unsigned char  bDescriptorType;
+	unsigned char  bInterfaceNumber;
+	unsigned char  bAlternateSetting;
+	unsigned char  bNumEndpoints;
+	unsigned char  bInterfaceClass;
+	unsigned char  bInterfaceSubClass;
+	unsigned char  bInterfaceProtocol;
+	unsigned char  iInterface;
+
+	unsigned char  no_of_ep;
+	unsigned char  num_altsetting;
+	unsigned char  act_altsetting;
+	struct usb_endpoint_descriptor ep_desc[USB_MAXENDPOINTS];
+    } __attribute__ ((packed));
+    ------------
+
+    As usb_endpoint_descriptor is only 7byte in length, the start of all
+    odd ep_desc[] structures is not word aligned. This makes wMaxPacketSize
+    of these structures also not word aligned.
+
+    ARMv5 Architecture however does not support non-aligned multibyte
+    data type (see A2.8 of ARM Architecture Reference Manual).
+
+    Signed-off-by: Stefan Althoefer <stefan.althoefer@web.de>
+    Signed-off-by: Remy Böhmer <linux@bohmer.net>
+
+commit 4c253fdb2a175ea3472c38a1455a16faa58e81f0
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date:	Tue Dec 9 10:27:33 2008 -0600
+
+    drivers/fsl_pci_init: Fix compile warning
+
+    fsl_pci_init.c: In function 'fsl_pci_setup_inbound_windows':
+    fsl_pci_init.c:122: warning: comparison is always true due to limited range of data type
+
+    The check only makes sense if we are CONFIG_PHYS_64BIT
+
+    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit dedacc18a8c2b3951581eb721fa055a4e0ac4845
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date:	Sun Dec 7 09:45:35 2008 +0100
+
+    usbtty/omap: update to current API
+
+    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+    Signed-off-by: Remy Böhmer <linux@bohmer.net>
+
+commit ee2e9ba917a62cc2e3a484bb79c8da0e01cb93ed
+Author: Anatolij Gustschin <agust@denx.de>
+Date:	Tue Dec 9 17:52:05 2008 +0100
+
+    video: fix FADS823 and RRvision compiling issues
+
+    Since commit 561858ee building for FADS823 and RRvision
+    doesn't work. Let's include version.h and timestamp.h
+    unconditionally to fix the problem.
+
+    Signed-off-by: Anatolij Gustschin <agust@denx.de>
+
+commit 2d2e05727fe4013f807ffa814dff0e75259a1db4
+Author: Stefan Roese <sr@denx.de>
+Date:	Tue Dec 2 10:53:47 2008 +0100
+
+    UBI: Fix size parsing in "ubi create"
+
+    Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 2ee951ba2ac9874d2a93d52e7a187d3184be937e
+Author: Stefan Roese <sr@denx.de>
+Date:	Thu Nov 27 14:07:09 2008 +0100
+
+    UBI: Enable re-initializing of the "ubi part" command
+
+    With this patch now, the user can call "ubi part" multiple times to
+    re-connect the UBI device to another MTD partition.
+
+    Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 9def12cae33d2d3ea2dd56b197fd3dfb3ad60bf4
+Author: Stefan Roese <sr@denx.de>
+Date:	Thu Nov 27 14:05:15 2008 +0100
+
+    MTD: Fix problem based on non-working relocation (list head mtd_partitions)
+
+    Don't use LIST_HEAD() but initialize the struct via INIT_LIST_HEAD() upon
+    first call of add_mtd_partitions(). Otherwise this won't work on platforms
+    where the relocation is broken (like MIPS or PPC).
+
+    Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 5e3ab68e9acf9edf304b8aa32ad7e005483a2c47
+Author: Trent Piepho <tpiepho@freescale.com>
+Date:	Wed Nov 12 17:29:48 2008 -0800
+
+    Section name should be ".data", not "data"
+
+    Signed-off-by: Trent Piepho <tpiepho@freescale.com>
+    Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 7fa6a2f3b66579dea8bc1a9177646e1141731b15
+Author: Wolfgang Denk <wd@denx.de>
+Date:	Tue Dec 9 00:39:08 2008 +0100
+
+    MAKEALL: Automatically use parallel builds
+
+    Add logic to the MAKEALL script to determine the number of CPU cores
+    on the system, and run a parallel build if there is more than one.
+    Usually this significantrly accelerates builds.
+
+    Allow to manually adjust the number of parallel make jobs by using
+    the "BUILD_NCPUS" environment variable.
+
+    Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 268405fa7c44156c5192a70779920c70906af8d6
+Author: Wolfgang Denk <wd@denx.de>
+Date:	Tue Dec 9 00:24:30 2008 +0100
+
+    vxworks.h: Fix build problem introduced by commits 29a4c24d/e9084b23
+
+    Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 153176a9414120ca1736f3cc4951623d6e14e6af
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date:	Tue Nov 11 06:08:59 2008 +0100
+
+    avr32/bootm: remove unused variable 'ret'
+
+    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+    Acked-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+
+commit 434c51a5e62f608a2a78ed5398ac43a1c77cc183
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date:	Wed Nov 12 13:06:48 2008 -0600
+
+    Remove unneeded CONFIG_SHELL references
+
+    Make should be using the bash shell by default which makes
+    CONFIG_SHELL unnecessary
+
+    Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit cf7a7b99794bac936899819b95539be1dbd71708
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date:	Wed Nov 12 12:33:20 2008 -0600
+
+    Use bash for default GNU Make shell application
+
+    Some Make script commands rely on bash-specific features like brace
+    expansion, so default to bash for the SHELL variable with a fallback
+    to the standard sh shell
+
+    Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit 4b530018764934ad5689196e9aa5714a6f4d1a6c
+Author: Heiko Schocher <hs@denx.de>
+Date:	Wed Nov 12 09:50:45 2008 +0100
+
+    jffs2: rename devices_init () in common/jffs2.c
+
+    rename devices_init () in common/jffs2.c to
+    jffs2_devices_init (), because there is also a
+    devices_init () in common/devices.c.
+
+    Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit af5eb847a10f1037590001355d88bab3fe7be48b
+Author: Daniel Hellstrom <daniel@gaisler.com>
+Date:	Mon Nov 10 12:46:20 2008 +0000
+
+    SPARC: Fixed compiler error introduced by commit c160a9544743
+
+    This patch fixes a build error for the SPARC platform. It was
+    introduced by commit c160a9544743e80e8889edb2275538e7764ce334.
+
+    Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
+
+commit 4c60259899aa00f59db0d936b8807f9a26411c0f
+Author: Gary Jennejohn <garyj@denx.de>
+Date:	Sun Nov 9 12:50:59 2008 +0100
+
+    mgsuvd add the board-specific part of the HDLC driver
+
+    Signed-off-by: Gary Jennejohn <garyj@denx.de>
+
+commit 534a4359666af48bd69a3743d8a8c2bdb1d3ec70
+Author: Gary Jennejohn <garyj@denx.de>
+Date:	Sun Nov 9 12:45:03 2008 +0100
+
+    mgcoge add the board-specific part of the HDLC driver
+
+    Signed-off-by: Gary Jennejohn <garyj@denx.de>
+
+commit 135f5534538bb8ea4f38a7030da12187d22ef7e0
+Author: Gary Jennejohn <garyj@denx.de>
+Date:	Sun Nov 9 12:36:15 2008 +0100
+
+    keymile add the common parts of the HDLC driver
+
+    This implements the ICN protocol used across the backplane and is
+    needed by all the keymile boards.
+
+    Signed-off-by: Gary Jennejohn <garyj@denx.de>
+
+commit 1cb82a9207a550557399eabc7fe47f21bbd9ddf8
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date:	Fri Nov 7 22:46:22 2008 +0100
+
+    drivers/bios_emulator: Move conditional compilation to Makefile
+
+    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit bcdf1d2cf6b24fb905fd7da80da4b3c65a7995b5
+Author: Richard Retanubun <RichardRetanubun@RuggedCom.com>
+Date:	Thu Nov 6 14:01:51 2008 -0500
+
+    common/cmd_ide.c: Corrected endian order printing for compact flash serial number.
+
+    Corrected endian order printing for compact flash serial number.
+
+    Signed-off-by: Richard Retanubun <RichardRetanubun@RuggedCom.com>
+
+commit 16a28ef219c27423a1ef502f19070c4d375079b8
+Author: Gary Jennejohn <garyj@denx.de>
+Date:	Thu Nov 6 15:04:23 2008 +0100
+
+    IOMUX: Add console multiplexing support.
+
+    Modifications to support console multiplexing.  This is controlled using
+    CONFIG_SYS_CONSOLE_MUX in the board configuration file.
+
+    This allows a user to specify multiple console devices in the environment
+    with a command like this: setenv stdin serial,nc.  As a result, the user can
+    enter text on both the serial and netconsole interfaces.
+
+    All devices - stdin, stdout and stderr - can be set in this manner.
+
+    1) common/iomux.c and include/iomux.h contain the environment setting
+    implementation.
+    2) doc/README.iomux contains a somewhat more detailed description.
+    3) The implementation in (1) is called from common/cmd_nvedit.c to
+    handle setenv and from common/console.c to handle initialization of
+    input/output devices at boot time.
+    4) common/console.c also contains the code needed to poll multiple console
+    devices for input and send output to all devices registered for output.
+    5) include/common.h includes iomux.h and common/Makefile generates iomux.o
+    when CONFIG_SYS_CONSOLE_MUX is set.
+
+    Signed-off-by: Gary Jennejohn <garyj@denx.de>
+
+commit 774ce72026f74ac9641bcbbc588b20f2e13f7ab8
+Author: Mike Frysinger <vapier@gentoo.org>
+Date:	Tue Nov 4 16:03:46 2008 -0500
+
+    strings: use puts() rather than printf()
+
+    When running `strings` on really long strings, the stack tends to get
+    smashed due to printf().  Switch to puts() instead since we're only passing
+    the data through.
+
+    Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit b03150b52e3c491a86a3cc0945274f0e8f9872e7
+Author: Niklaus Giger <niklaus.giger@member.fsf.org>
+Date:	Mon Nov 3 22:16:18 2008 +0100
+
+    Use new CONFIG_SYS_VXWORKS parameters for Netstal boards
+
+    Signed-off-by: Niklaus Giger <niklaus.giger@member.fsf.org>
+
+commit 29a4c24de99d8cb4ac32991c04cab87ed94ca1f9
+Author: Niklaus Giger <niklaus.giger@member.fsf.org>
+Date:	Mon Nov 3 22:15:34 2008 +0100
+
+    cmd_elf.c: Cleanup bootvx and handle new CONFIG_SYS_VXWORKS parameters
+
+    - fix size too small by one in sprintf
+    - changed old (pre 2004) device name ibmEmac to emac
+    - boot device may be overriden in board config
+    - servername may be defined in board config
+    - additional parameters may be defined in board config
+    - fixed some line wrappings
+    - replaced	redundant MAX define by max
+
+    Signed-off-by: Niklaus Giger <niklaus.giger@member.fsf.org>
+
+commit e9084b23d16102f44ace24379a1c0c352497ef80
+Author: Niklaus Giger <niklaus.giger@member.fsf.org>
+Date:	Mon Nov 3 22:14:36 2008 +0100
+
+    Add vxworks.h to handle CONFIG_SYS_VXWORKS parameters
+
+    Signed-off-by: Niklaus Giger <niklaus.giger@member.fsf.org>
+
+commit 0b2f4ecad473d785959c7976f20d2a00bd0ee01f
+Author: Niklaus Giger <niklaus.giger@member.fsf.org>
+Date:	Mon Nov 3 22:13:47 2008 +0100
+
+    README: Document CONFIG_SYS parameters for vxworks
+
+    Signed-off-by: Niklaus Giger <niklaus.giger@member.fsf.org>
+
+commit ace514837cac656e29c37a19569cb8ea83071126
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date:	Fri Oct 31 11:12:38 2008 -0500
+
+    lcd: Let the board code show board-specific info cleanup
+
+    remove unneeded version.h from lcd.c
+
+    Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+    Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 561858ee7d0274c3e89dc98d4d0698cb6fcf6fd9
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date:	Mon Nov 3 09:30:59 2008 -0600
+
+    Update U-Boot's build timestamp on every compile
+
+    Use the GNU 'date' command to auto-generate a new U-Boot
+    timestamp on every compile.
+
+    Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit 83ad179e2f0f625b88adb8ef5696709e46fb9077
+Author: Remy Bohmer <linux@bohmer.net>
+Date:	Thu Dec 4 22:25:57 2008 +0100
+
+    Remove redundant armv4 flag from arm926ejs compile flags
+
+    Currently the arm926ejs tree has the armv4 option set during compilation.
+    This flag does not belong here because a arm926 CPU is always a armv5 CPU.
+
+    Signed-off-by: Remy Bohmer <linux@bohmer.net>
+
+commit 89a7a87f084c657f8e32b513a77b50eca07e17ec
+Author: Nicolas Ferre <nicolas.ferre@atmel.com>
+Date:	Sat Dec 6 13:11:14 2008 +0100
+
+    at91: Choose environment variables location within make config target
+
+    This patch adds the possiblity to choose the media where the environment will
+    be located. This allow to choose this fundamental configuration without editing
+    config files.
+
+    Documentation file added.
+
+    Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
+    Acked-by: Stelian Pop <stelian@popies.net>
+    Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 1450c4a6682378567030414a9f1198c39b7730c7
+Author: Anatolij Gustschin <agust@denx.de>
+Date:	Mon Nov 3 15:30:34 2008 +0100
+
+    lwmon, tqm8xx: Fix build errors
+
+    Commit 6b59e03e0237a40a2305ea385defdfd92000978b
+    lcd: Let the board code show board-specific info
+
+    introduced some bugs which prevent U-Boot building
+    for lwmon board if CONFIG_LCD_INFO_BELOW_LOGO will
+    be defined in the board configuration.
+
+    Also "LCD enabled" building for TQM823L doesn't work
+    since this commit.
+
+    This patch fixes above-mentioned issues.
+
+    Signed-off-by: Anatolij Gustschin <agust@denx.de>
+
+commit bfa0af6b22ff25b0719a8910f9b6d1f975aa6fb0
+Author: Mike Frysinger <vapier@gentoo.org>
+Date:	Sun Nov 2 01:18:18 2008 -0400
+
+    ignore .gdb_history files
+
+    When using gdb, history files will often get generated.  So ignore them.
+
+    Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit c8aa7dfc18f7cc90d0aea6c7becbb67dfc5bba4b
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date:	Fri Oct 31 12:26:55 2008 +0100
+
+    FPGA: move fpga drivers to drivers/fpga
+
+    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 6a86bb6c25376f0358478219fa28d7c84dd01ed0
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date:	Mon Dec 1 16:29:38 2008 -0600
+
+    net: Fix TftpStart() ip:filename bug
+
+    The TftpStart() function modifies the 'BootFile'
+    string when 'BootFile' contains both an IP address
+    and filename (eg 1.2.3.4:/path/file). This causes
+    subsequent calls to TftpStart to incorrectly parse
+    the TFTP filename and server IP address to use.
+    For example:
+
+    => tftp 0x100000 10.52.0.62:/home/ptyser/non_existant
+    Speed: 100, half duplex
+    Using eTSEC1 device
+    TFTP from server 10.52.0.62; our IP address is 10.52.253.79
+		     ^^^^^^^^^^ CORRECT
+    Filename '/home/ptyser/non_existant'.
+	      ^^^^^^^^^^^^^^^^^^^^^^^^^ CORRECT
+    Load address: 0x100000
+    Loading: *
+    TFTP error: 'File not found' (1)
+    Starting again
+
+    eTSEC2: No link.
+    Speed: 100, half duplex
+    Using eTSEC1 device
+    TFTP from server 10.52.0.33; our IP address is 10.52.253.79
+		     ^^^^^^^^^^ WRONG
+    Filename '10.52.0.62'.
+	      ^^^^^^^^^^ WRONG
+    Load address: 0x100000
+    Loading: *
+    TFTP error: 'File not found' (1)
+    Starting again
+
+    TftpStart() was modified to not modify the 'BootFile' string.
+
+    Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit d32c5be50bf0600bfdc54223ef341ee9c63db445
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date:	Mon Dec 1 16:26:21 2008 -0600
+
+    net: Add additional IP fragmentation check
+
+    Ignore IP packets which have the "more fragments" flag bit
+    set.  This flag indicates the IP packet is fragmented and
+    must be ignored by U-Boot.
+
+    Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit e0c07b868cab405ab4b5335a0247899bfc5ea0b6
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date:	Mon Dec 1 16:26:20 2008 -0600
+
+    net: Define IP flag field values
+
+    These defines were pulled from the "Add simple
+    IP/UDP fragmentation support" patch from Frank
+    Haverkamp <haver@vnet.ibm.com>.
+
+    Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 23afaba65ec5206757e589ef334a8b38168c045f
+Author: Anatolij Gustschin <agust@denx.de>
+Date:	Tue Dec 2 10:31:04 2008 +0100
+
+    net: tsec: Fix Marvell 88E1121R phy init
+
+    This patch tries to ensure that phy interrupt pin
+    won't be asserted after booting. We experienced
+    following issues with current 88E1121R phy init:
+
+    Marvell 88E1121R phy can be hardware-configured
+    to share MDC/MDIO and interrupt pins for both ports
+    P0 and P1 (e.g. as configured on socrates board).
+    Port 0 interrupt pin will be shared by both ports
+    in such configuration. After booting Linux and
+    configuring eth0 interface, port 0 phy interrupts
+    are enabled. After rebooting without proper eth0
+    interface shutdown port 0 phy interrupts remain
+    enabled so any change on port 0 (link status, etc.)
+    cause assertion of the interrupt. Now booting Linux
+    and configuring eth1 interface will cause permanent
+    phy interrupt storm as the registered phy 1 interrupt
+    handler doesn't acknowledge phy 0 interrupts. This
+    of course should be fixed in Linux driver too.
+
+    Signed-off-by: Anatolij Gustschin <agust@denx.de>
+    Acked-by: Andy Fleming <afleming@freescale.com>
+    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 2e4970d8109d690adcf615d9e3cac7b5b2e8eaed
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date:	Tue Dec 2 12:59:51 2008 -0600
+
+    net: Fix download command parsing
+
+    When CONFIG_SYS_HUSH_PARSER is defined network download
+    commands with 1 argument in the format 'tftp "/path/file"'
+    do not work as expected. The hush command parser strips
+    the quotes from "/path/file" which causes the network
+    commands to interpret "/path/file" as an address
+    instead of the intended filename.
+
+    The previous check for a leading quote in netboot_common()
+    was replaced with a check which ensures only valid
+    numbers are treated as addresses.
+
+    Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 3c2c2f427905040c1513d0c51d637689cba48346
+Author: Remy Bohmer <linux@bohmer.net>
+Date:	Thu Nov 27 22:30:27 2008 +0100
+
+    Remove non-ascii characters from fat code
+
+    This code contains some non-ascii characters in comment lines and code.
+    Most editors do not display those characters properly and editing those
+    files results always in diffs at these places which are usually not required
+    to be changed at all. This is error prone.
+
+    So, remove those weird characters and replace them by normal C-style
+    equivalents for which the proper defines were already in the header.
+
+    Signed-off-by: Remy Bohmer <linux@bohmer.net>
+
+commit dc889e865356497d3e495570118c2245ebce2631
+Author: Dave Liu <daveliu@freescale.com>
+Date:	Fri Nov 28 20:16:58 2008 +0800
+
+    85xx: fix the wrong DDR settings for MPC8572DS
+
+    The default DDR freq is 400MHz or 800M data rate,
+    the old settings is pure wrong for the default case.
+
+    Signed-off-by: Dave Liu <daveliu@freescale.com>
+    Acked-by: Andy Fleming <afleming@freescale.com>
+
+commit 9df59533f77de2829b4b66e5b7620e04edaa391c
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date:	Mon Nov 24 10:29:26 2008 -0600
+
+    85xx: init gd as early as possible
+
+    Moved up the initialization of GD so C code like set_tlb() can use
+    gd->flags to determine if we've relocated or not in the future.
+
+    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+    Acked-by: Andy Fleming <afleming@freescale.com>
+
+commit aed461af81012a398a205e9be67ab37667491838
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date:	Mon Nov 24 10:29:25 2008 -0600
+
+    85xx: Fix relocation of CCSRBAR
+
+    If the virtual address for CCSRBAR is the same after relocation but
+    the physical address is changing we'd end up having two TLB entries with
+    the same VA.  Instead we new us the new CCSRBAR virt address + 4k as a
+    temp virt address to access the old CCSRBAR to relocate it.
+
+    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+    Acked-by: Andy Fleming <afleming@freescale.com>
+
+commit ea154a1781135d822eedee7567cc156089eae93c
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date:	Mon Nov 24 10:25:14 2008 -0600
+
+    FSL: Moved BR_PHYS_ADDR for localbus to common header
+
+    The BR_PHYS_ADDR macro is useful on all machines that have local bus
+    which is pretty much all 83xx/85xx/86xx chips.
+
+    Additionally most 85xx & 86xx will need it if they want to support
+    36-bit physical addresses.
+
+    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+    Acked-by: Andy Fleming <afleming@freescale.com>
+
+commit 9427ccde0355a2ebf47454e8e1be59f5b9864e08
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date:	Mon Dec 1 13:47:12 2008 -0600
+
+    85xx: Add PORDEVSR_PCI1 define
+
+    Add define used to determine if PCI1 interface is in PCI or PCIX mode.
+
+    Convert users of the old PORDEVSR_PCI constant to use MPC85xx_PORDEVSR_PCI1
+
+    Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+    Signed-off-by: Andy Fleming <afleming@freescale.com>
+
+commit 35db1c6d34b57ae15e99cf03c8e8f8a6148d74f3
+Author: Becky Bruce <becky.bruce@freescale.com>
+Date:	Fri Nov 21 19:24:22 2008 -0600
+
+    drivers/fsl_pci_init: Fix inbound window mapping bug
+
+    The current code will cause the creation of a 4GB window
+    starting at 0 if we have more than 4GB of RAM installed,
+    which overlaps with PCI_MEM space and causes pci_bus_to_phys()
+    to return erroneous information. Limit the size to 4GB - 1;
+    which causes the code to create one 2GB and one 1GB window
+    instead.
+
+    Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org>
+    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+    Acked-by: Andy Fleming <afleming@freescale.com>
+
+commit 5a105a333dab6a23e92d763ce76d6f31d57f45df
+Author: Jon Loeliger <jdl@freescale.com>
+Date:	Thu Nov 20 15:36:48 2008 -0600
+
+    Removed unused CONFIG_L1_INIT_RAM symbol.
+
+    Prevent further viral propogation of the unused
+    symbol CONFIG_L1_INIT_RAM by just removing it.
+
+    Signed-off-by: Jon Loeliger <jdl@freescale.com>
+    Acked-by: Andy Fleming <afleming@freescale.com>
+
+commit 7008d26a40a76f90cae5824c812cfed449fb97b8
+Author: Ed Swarthout <Ed.Swarthout@freescale.com>
+Date:	Wed Oct 29 09:21:44 2008 -0500
+
+    fsl ddr skip interleaving if not supported.
+
+    Removed while(1) hang if memctl_intlv_ctl is set wrong.
+    Remove embedded tabs from strings.
+
+    Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
+    Acked-by: Kumar Gala <galak@kernel.crashing.org>
+    Acked-by: Andy Fleming <afleming@freescale.com>
+
+commit dd332e18d082de75eca3fc2c7c778f5d4571a096
+Author: Anatolij Gustschin <agust@denx.de>
+Date:	Thu Nov 13 18:08:57 2008 +0100
+
+    85xx: socrates: fix DDR SDRAM tlb entry configuration
+
+    since commit be0bd8234b9777ecd63c4c686f72af070d886517
+    tlb entry for socrates DDR SDRAM will be reconfigured
+    by setup_ddr_tlbs() from initdram() causing an
+    inconsistency with previously configured DDR SDRAM tlb
+    entry from tlb_table:
+
+    socrates>l2cam 7 9
+    IDX  PID	  EPN  SIZE V TS	   RPN U0-U3 WIMGE UUUSSS
+      7 : 00 00000000 256MB V  0 -> 0_00000000	0000 -I-G- ---RWX
+      8 : 00 00000000 256MB V  0 -> 0_00000000	0000 ----- ---RWX
+      9 : 00 10000000 256MB V  0 -> 0_10000000	0000 ----- ---RWX
+
+    This patch makes the presence of the DDR SDRAM tlb entry in
+    the tlb_table dependent on CONFIG_SPD_EEPROM to avoid this
+    inconsistency.
+
+    Signed-off-by: Anatolij Gustschin <agust@denx.de>
+    Acked-by: Andy Fleming <afleming@freescale.com>
+
+commit a2cd50ed6ef0ac6b127b3d6db756979a8336718d
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date:	Tue Nov 11 10:17:10 2008 -0600
+
+    85xx: Add CPU 2 errata workaround to all 8548 boards
+
+    All mpc8548-based boards should implement the suggested workaround
+    to CPU 2 errata. Without the workaround, its possible for the
+    8548's core to hang while executing a msync or mbar 0 instruction
+    and a snoopable transaction from an I/O master tagged to make
+    quick forward progress is present.
+
+    Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+    Acked-by: Andy Fleming <afleming@freescale.com>
+
+commit e57f0fa1333cdf3ca36110aac2900712a5f82976
+Author: Dave Liu <daveliu@freescale.com>
+Date:	Tue Oct 28 17:53:45 2008 +0800
+
+    85xx: the DDR tlb is missed for the !CONFIG_SPD_EEPROM case
+
+    we need TLB entry for DDR at !SPD case.
+
+    Signed-off-by: Dave Liu <daveliu@freescale.com>
+    Acked-by: Andy Fleming <afleming@freescale.com>
+
+commit 9b0ad1b1c7a15ff674978705c7c52264978dc5d8
+Author: Dave Liu <daveliu@freescale.com>
+Date:	Tue Oct 28 17:53:38 2008 +0800
+
+    85xx: remove the unused ddr_enable_ecc in the board file
+
+    The DDR controller of 8548/8544/8568/8572/8536 processors
+    have the ECC data init feature, and the new DDR code is
+    using the feature, and we don't need the way with DMA to
+    init memory any more.
+
+    Signed-off-by: Dave Liu <daveliu@freescale.com>
+    Acked-by: Andy Fleming <afleming@freescale.com>
+
+commit 4a129a57d923f7c15aa1f567028a80a32d66a100
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date:	Sun Nov 30 19:36:53 2008 +0100
+
+    at91rm9200dk: Fix typo
+
+    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit ed3b18e05c9a8ffa5fb643da9bcec7452e5d5e01
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date:	Sun Nov 30 19:36:50 2008 +0100
+
+    AT91: remove non supported board AT91RM9200DF macro
+
+    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit bd876772ee04095e5dd943d97515a1f14bad4b1c
+Author: Ilko Iliev <iliev@ronetix.at>
+Date:	Tue Dec 2 17:27:54 2008 +0100
+
+    mtd/dataflash.c: fix a problem with the last partition
+
+    This patch fix the problem that only the [NB_DATAFLASH_AREA - 1] dataflash
+    partition can be defined to use the area to the end of dataflash size.
+    Now it is possible to have only one dataflash partition from 0 to the end
+    of of dataflash size.
+
+    Signed-off-by: Ilko Iliev <iliev@ronetix.at>
+
+commit 03f797793b124dccaae145b977d15d6cb9e74504
+Author: Ilko Iliev <iliev@ronetix.at>
+Date:	Tue Dec 2 17:20:17 2008 +0100
+
+    fix some coding style violations.
+
+    This patch fix some coding style violations.
+
+    Signed-off-by: Ilko Iliev <iliev@ronetix.at>
+
+commit 5e46b1e54112f4b7fd5185665e571510132c12a7
+Author: Stefan Roese <sr@denx.de>
+Date:	Thu Nov 27 14:11:37 2008 +0100
+
+    OneNAND: Add missing mtd info struct before calling onenand_erase()
+
+    Without this patch "saveenv" crashes when MTD partitions are enabled (e.g.
+    for use in UBI) via CONFIG_MTD_PARTITIONS.
+
+    Signed-off-by: Stefan Roese <sr@denx.de>
+    Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit 29382d4064fbaff5daacff4c3209370fa5713966
+Author: Becky Bruce <becky.bruce@freescale.com>
+Date:	Thu Nov 20 16:43:52 2008 -0600
+
+    mpc8641: Fix error in README
+
+    I made some updates to the code that didn't make it into the
+    README - fix this
+
+    Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
+
+commit 801a194616d95e6fc426a176d9615ccbf9876c7f
+Author: Jon Loeliger <jdl@freescale.com>
+Date:	Thu Nov 20 12:01:02 2008 -0600
+
+    Removed unused CONFIG_L1_INIT_RAM symbol.
+
+    Prevent further viral propogation of the unused
+    symbol CONFIG_L1_INIT_RAM by just removing it.
+
+    Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit f698738e46cb461e28c2d58228bb34a2fcf5a475
+Author: Jon Loeliger <jdl@freescale.com>
+Date:	Thu Nov 20 14:02:56 2008 -0600
+
+    86xx: Fix non-64-bit compilation problems.
+
+    Introducing 64-bit (36-bit) support for the MPC8641HPCN
+    failed to accomodate the other two 86xx boards.
+    Introduce definitions for CONFIG_SYS_CCSRBAR_PHYS_{LOW,HIGH}
+    CONFIG_SYS_CCSR_DEFAULT_DBAT{U,L} and CONFIG_SYS_CCSR_DEFAULT_IBAT{U,L}
+    with nominal 32-bit values.
+
+    Signed-off-by: Jon Loeliger <jdl@freescale.com>
+    Acked-by: Becky Bruce <becky.bruce@freescale.com>
+
+commit bebfc6ef3ec994c8e18783269b1d8d41f8e38afd
+Author: Michael Trimarchi <trimarchi@gandalf.sssup.it>
+Date:	Wed Nov 26 17:40:37 2008 +0100
+
+    Remove obsolete command (apply afte USB style patch, 80 chars strict)
+
+    Remove USB obsolete commmand
+
+    Signed-off-by: Michael Trimarchi <trimarchi@gandalf.sssup.it>
+    Signed-off-by: Remy Böhmer <linux@bohmer.net>
+
+commit de39f8c19d7c12017248c49d432dcb81db68f724
+Author: Michael Trimarchi <trimarchi@gandalf.sssup.it>
+Date:	Wed Nov 26 17:41:34 2008 +0100
+
+    USB style patch, 80 chars strict
+
+    USB Code style patch
+
+    Signed-off-by: Michael Trimarchi <trimarchi@gandalf.sssup.it>
+    Signed-off-by: Remy Böhmer <linux@bohmer.net>
+
+commit d10c5a87cb8affbb4d35a311370316d4383d598e
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date:	Fri Nov 7 22:46:21 2008 +0100
+
+    drivers/usb: Move conditional compilation to Makefile
+
+    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+    Signed-off-by: Remy Böhmer <linux@bohmer.net>
+
+commit 2077e348c2a84901022ad95311b47b70361e6daa
+Author: Scott Wood <scottwood@freescale.com>
+Date:	Tue Nov 25 10:47:02 2008 -0600
+
+    NAND: Fix misplaced return statement in nand_{read,write}_skip_bad().
+
+    This caused the operation to be needlessly repeated if there were
+    no bad blocks and no errors.
+
+    Signed-off-by: Valeriy Glushkov <gvv@lstec.com>
+    Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit 89295028e7d8f7a524f485328279d72fdb102385
+Author: Michal Simek <monstr@monstr.eu>
+Date:	Mon Nov 24 12:09:50 2008 +0100
+
+    ppc4xx: ml300 remove Xilinx BSP from ml300 folder
+
+    This BSP should be outside u-boot source tree.
+    The second reason is that xilinx ppc405 was moved to generic platform.
+
+    Signed-off-by: Michal Simek <monstr@monstr.eu>
+    Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 24eea623d4974a169026a975ba12fb23d48154b1
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date:	Mon Nov 24 15:11:10 2008 +0100
+
+    ppc4xx: Remove unused features
+
+    This patch disables some unused features from the PCI405 configuration
+    to keep U-Boot image size below 192k.
+
+    Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+    Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 0c2385c3bb51f5d3911fce1ec4720db86b534c2b
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date:	Mon Nov 24 15:11:09 2008 +0100
+
+    ppc4xx: Use correct io accessors for PCI405
+
+    Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+    Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 348c849d86a6f0785752b9bc497a34658713d1d1
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date:	Mon Nov 24 15:11:08 2008 +0100
+
+    ppc4xx: Remove unused code from PCI405 code
+
+    Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+    Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 58c696eed839af894e0265064669c402dc28b371
+Author: Wolfgang Denk <wd@xpert.denx.de>
+Date:	Mon Nov 24 21:50:59 2008 +0100
+
+    AT91RM9200DK: fix broken boot from NOR flash
+
+    Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 8052352f20b33bef8f9872fc983eac73d4693c38
+Author: Jens Scharsig <esw@bus-elektronik.de>
+Date:	Tue Nov 18 10:48:46 2008 +0100
+
+    at91rm9200: fix broken boot from nor flash
+
+    This patch fix the broken boot from NOR Flash on AT91RM9200 boards, if
+    CONFIG_AT91RM9200 is defined and nor preloader is used.
+
+    Signed-off-by: Jens Scharsig <esw@bus-elektronik.de>
+
+commit 25ea652e907516a283b38237e83712a918f125d7
+Author: Piotr Ziecik <kosmo@semihalf.com>
+Date:	Mon Nov 17 15:58:00 2008 +0100
+
+    UBI: Add proof-of-concept CFI flash support
+
+    With this patch UBI can be used on CFI flash chips.
+
+    Signed-off-by: Piotr Ziecik <kosmo@semihalf.com>
+    Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit e6a7edbc1778d27431ac663b40a71dafa5d20578
+Author: Piotr Ziecik <kosmo@semihalf.com>
+Date:	Mon Nov 17 15:57:59 2008 +0100
+
+    mtd: Remove a printf() from add_mtd_device().
+
+    Remove a printf() from add_mtd_device(), which produces spurious output.
+
+    Signed-off-by: Piotr Ziecik <kosmo@semihalf.com>
+    Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 91809ed51d8327a8dbbf29aa98a091154c282171
+Author: Piotr Ziecik <kosmo@semihalf.com>
+Date:	Mon Nov 17 15:57:58 2008 +0100
+
+    cfi-mtd: Add cfi-mtd driver.
+
+    Add cfi-mtd driver, which exports CFI flash to MTD layer.
+    This allows CFI flash devices to be used from MTD layer.
+
+    Building of the new driver is controlled by CONFIG_FLASH_CFI_MTD
+    option. Initialization is done by calling cfi_mtd_init() from
+    flash_init().
+
+    Signed-off-by: Piotr Ziecik <kosmo@semihalf.com>
+    Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 6ea808efdf9aa5d9067fbfac32acde8539129ed2
+Author: Piotr Ziecik <kosmo@semihalf.com>
+Date:	Mon Nov 17 15:49:32 2008 +0100
+
+    cfi_flash: Add interface for flash verbosity control
+
+    Add interface for flash verbosity control. It allows
+    to disable output from low-level flash API. It is useful
+    when calling these low-level functions from context other
+    than flash commands (for example the MTD/CFI interface
+    implmentation).
+
+    Signed-off-by: Piotr Ziecik <kosmo@semihalf.com>
+    Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit ebc9784ce6528385bb8d2558e783622d4bbf20f8
+Author: Piotr Ziecik <kosmo@semihalf.com>
+Date:	Thu Nov 20 15:17:38 2008 +0100
+
+    cfi_flash: Export flash_sector_size() function.
+
+    Export flash_sector_size() function from drivers/mtd/cfi_flash.c,
+    so that it can be used in the upcoming cfi-mtd driver.
+
+    Signed-off-by: Piotr Ziecik <kosmo@semihalf.com>
+    Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 45aa5a7f4d5bcb79927ddfc896c1d7c4326e235d
+Author: Stefan Roese <sr@denx.de>
+Date:	Mon Nov 17 14:45:22 2008 +0100
+
+    cfi_flash: Make all flash access functions weak
+
+    This patch defines all flash access functions as weak so that
+    they can be overridden by board specific versions.
+
+    This will be used by the upcoming VCTH board support where the NOR
+    FLASH unfortunately can't be accessed memory-mapped. Special
+    accessor functions are needed here.
+
+    To enable this weak functions you need to define
+    CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS in your board config header.
+    Otherwise the "old" default functions will be used resulting
+    in smaller code.
+
+    Signed-off-by: Stefan Roese <sr@denx.de>
+    Acked-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+
+commit a5c4067017631d903e1afa6ad615f0ce19fea517
+Author: Stefan Roese <sr@denx.de>
+Date:	Mon Nov 24 08:31:16 2008 +0100
+
+    UBI: Change parsing of size in commands to default to hex
+
+    Currently the size parameters of the UBI commands (e.g. "ubi write") are
+    decoded as decimal instead of hex as default. This patch now interprets
+    all these values consistantly as hex, as all other standard U-Boot commands
+    do.
+
+    Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit de01c76c3ccc4e6c5989228eed58e955a3a1a968
+Author: Stefan Roese <sr@denx.de>
+Date:	Fri Nov 21 13:06:06 2008 +0100
+
+    ppc4xx: ML2 shouldn't include the 4xx EMAC driver
+
+    Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 1a6a00dcc5bdfc6e9b4b00f39c1f583a7f96fc7f
+Author: Yuri Tikhonov <yur@emcraft.com>
+Date:	Fri Nov 14 16:19:19 2008 +0300
+
+    ppc4xx: katmai: Change default config
+
+     This patch enables support for EXT2, and increases the
+    CONFIG_SYS_BOOTMAPSZ size for the default configuration
+    of the katmai boards to use them as the RAID-reference
+    AMCC setups.
+
+     EXT2 enabling allows one to boot kernels from the EXT2
+    formatted Compact Flash cards.
+
+     CONFIG_SYS_BOOTMAPSZ increasing allows one to boot the
+    Linux kernels, which use PAGE_SIZE of 256KB. Otherwise,
+    the memory area with DTB file (which is placed at the
+    end of the bootmap area) will turn out to be overlapped
+    with the BSS segment of the 256KB kernel, and zeroed
+    in early_init() of Linux.
+
+     Actually, increasing of the bootmap size could be done
+    via setting of the bootm_size U-Boot variable, but it looks
+    like the current U-Boot implementation have some bootm_size-
+    related functionality lost. In many places through the U-Boot
+    code the CONFIG_SYS_BOOTMAPSZ definition is used directly
+    (instead of trying to read the corresponding value from the
+    environment). The same is truth for the boot_jump_linux()
+    function in lib_ppc/bootm.c, where U-Boot transfers control
+    to Linux passing the CONFIG_SYS_BOOTMAPSZ (not bootm_size)
+    value to the booting kernel.
+
+    Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
+    Signed-off-by: Ilya Yanok <yanok@emcraft.com>
+    Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit ddf45cc758d394591fb9bcdcbe96530f733f2bce
+Author: Dave Mitchell <dmitch71@gmail.com>
+Date:	Thu Nov 20 14:09:50 2008 -0600
+
+    ppc4xx: Changed 460EX/GT OCM TLB and internal SRAM initialization
+
+    Expanded OCM TLB to allow access to 64K OCM as well as 256K of
+    internal SRAM.
+
+    Adjusted internal SRAM initialization to match updated user
+    manual recommendation.
+
+    OCM & ISRAM are now mapped as follows:
+	    physical	    virtual	    size
+    ISRAM   0x4_0000_0000   0xE300_0000     256k
+    OCM     0x4_0004_0000   0xE304_0000     64k
+
+    A single TLB was used for this mapping.
+
+    Signed-off-by: Dave Mitchell <dmitch71@gmail.com>
+    Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit b14ca4b61a681f75f3125676e09d7ce6af66e927
+Author: Dave Mitchell <dmitch71@gmail.com>
+Date:	Thu Nov 20 14:00:49 2008 -0600
+
+    ppc4xx: Added ppc4xx-isram.h for internal SRAM and L2 cache DCRs
+
+    Added include/asm-ppc/ppc4xx-isram.h and moved internal SRAM and
+    L2 cache DCRs from ppc440.h to this new header.
+
+    Also converted these DCR defines from lowercase to uppercase and
+    modified referencing modules to use them.
+
+    Signed-off-by: Dave Mitchell <dmitch71@gmail.com>
+    Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 711e2b2af820d21d9931d4cf8057d3894600fd54
+Author: Steven A. Falco <sfalco@harris.com>
+Date:	Thu Nov 20 14:37:57 2008 -0500
+
+    ppc4xx: Delete unused definitions for SDR0_DDRCFG from ppc4xx.h
+
+    The definitions of bits in SDR_CFG are incorrect, and not used within
+    U-Boot.  Therefore, they can be removed.
+
+    The naming of the sdr_ddrdl/sdr_cfg registers do not follow conventions,
+    and are unused, so they can be removed too.
+
+    A definition for SDR0_DDRCFG is added.
+
+    Signed-off-by: Steven A. Falco <sfalco@harris.com>
+    Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit e23c7c95a96eb0f068efe5c532215a10a1512a95
+Author: Dirk Behme <dirk.behme@gmail.com>
+Date:	Mon Nov 10 20:15:25 2008 +0100
+
+    ARM: OMAP: Convert IO macros
+
+    Convert IO macros to readx/writex.
+
+    Signed-off-by: Dirk Behme <dirk.behme@gmail.com>
+
+commit 263b749e2e25473a48776d317bd2a7e2ddcdd212
+Author: Ilko Iliev <iliev@ronetix.at>
+Date:	Sun Nov 9 15:53:14 2008 +0100
+
+    lib_arm: do_bootm_linux() - correct a small mistake
+
+    This patch corrects a small bug in the "if" condition:
+    the parameter "flag" is 0 and the "if" condition is always true.
+    The result is - the boom command doesn't start the kernel.
+    Affected targets: all arm based.
+
+    Signed-off-by: Ilko Iliev <iliev@ronetix.at>
+
+commit 3e0cda071a67cb5709e3fa4faf6b31a731859acc
+Author: Stelian Pop <stelian@popies.net>
+Date:	Sun Nov 9 00:14:46 2008 +0100
+
+    AT91: Enable PLLB for USB
+
+    At least some (old ?) versions of the AT91Bootstrap do not set up the
+    PLLB correctly to 48 MHz in order to make USB host function correctly.
+
+    This patch sets up the PLLB to the same values Linux uses, and makes USB
+    work ok on the following CPUs:
+	- AT91CAP9
+	- AT91SAM9260
+	- AT91SAM9263
+
+    This patch also defines CONFIG_USB_STORAGE and CONFIG_CMD_FAT for all
+    the relevant AT91CAP9/AT91SAM9 atmel boards.
+
+    Signed-off-by: Stelian Pop <stelian@popies.net>
+    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit ad229a44e162af0f65e57e4e3dc133d5f0364ecb
+Author: Stelian Pop <stelian@popies.net>
+Date:	Fri Nov 7 13:55:14 2008 +0100
+
+    AT91: Use AT91_CPU_CLOCK in displays
+
+    Introduce AT91_CPU_CLOCK and use it for displaying the CPU
+    speed in the LCD driver.
+
+    Also make AT91_MAIN_CLOCK and AT91_MASTER_CLOCK reflect the
+    corresponding board clocks.
+
+    Signed-off-by: Stelian Pop <stelian@popies.net>
+
+commit 25fb4eaaeab3f8866020818f4729d990dcc91cf0
+Author: Stefan Roese <sr@denx.de>
+Date:	Thu Nov 20 11:46:20 2008 +0100
+
+    ppc4xx: Clear all potentially pending exceptions in MCSR
+
+    This is needed on Canyonlands which still has an exception pending
+    while running relocate_code(). This leads to a failure after trap_init()
+    is moved to the top of board_init_r().
+
+    Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit facdad5f2602e899a01746916beddbf9e856b5ee
+Author: Heiko Schocher <hs@denx.de>
+Date:	Wed Nov 19 10:10:30 2008 +0100
+
+    powerpc: 83xx: add missing TIMING_CFG1_CASLAT_* defines
+
+    Signed-off-by: Heiko Schocher <hs@denx.de>
+    Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 2f2a5c3714d17f4ead18b713128b7226e0e822f4
+Author: Howard Gregory <Greg.Howard@freescale.com>
+Date:	Tue Nov 4 14:55:33 2008 +0800
+
+    mpc83xx: Improve the performance of DDR memory
+
+    modify the CAS timings. my understanding is that these
+    settings decrease various wait times in the DDR interface.
+    Because these wait times are in clock cycles, and the DDR
+    clock on the 8315 RDB runs slower than on some other 83xx
+    platforms, we can dial down these values without a problem,
+    thereby decreasing the latency of memory a little.
+
+    Signed-off-by: Howard Gregory <Greg.Howard@freescale.com>
+    Signed-off-by: Dave Liu <daveliu@freescale.com>
+    Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 8000b086b33a5a81f3f390f37e178db7956dc08b
+Author: Kyungmin Park <kyungmin.park@samsung.com>
+Date:	Fri Oct 24 14:55:33 2008 +0200
+
+    ARM: Add Apollon UBI support
+
+    To enable UBI on Apollon you need to uncomment the CONFIG_SYS_USE_UBI
+    macro.
+
+    Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
+    Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 694a0b3f1c0accd0de94b89555155d69f8022824
+Author: Kyungmin Park <kyungmin.park@samsung.com>
+Date:	Wed Nov 19 11:47:05 2008 +0100
+
+    UBI: Add UBI command support
+
+    This patch adds these UBI commands:
+
+    ubi part [nand|onenand] [part] - Show or set current partition
+    ubi info [l[ayout]] -Display volume and UBI layout information
+    ubi create[vol] volume [size] [type] - Create volume name with size
+    ubi write[vol] address volume size - Write volume from address with size
+    ubi read[vol] address volume [size] - Read volume to address with size
+    ubi remove[vol] volume - Remove volume
+
+    Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
+    Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 58be3a1056d88c6d05f3e914389282807e69923a
+Author: Kyungmin Park <kyungmin.park@samsung.com>
+Date:	Wed Nov 19 16:38:24 2008 +0100
+
+    UBI: Add basic UBI support to U-Boot (Part 8/8)
+
+    This patch adds basic UBI (Unsorted Block Image) support to U-Boot.
+    It's based on the Linux UBI version and basically has a "OS"
+    translation wrapper that defines most Linux specific calls
+    (spin_lock() etc.) into no-ops. Some source code parts have been
+    uncommented by "#ifdef UBI_LINUX". This makes it easier to compare
+    this version with the Linux version and simplifies future UBI
+    ports/bug-fixes from the Linux version.
+
+    Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
+    Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 47ae6693f54f80455ae32c2e0d995e0e4bdc15b9
+Author: Kyungmin Park <kyungmin.park@samsung.com>
+Date:	Wed Nov 19 16:36:36 2008 +0100
+
+    UBI: Add basic UBI support to U-Boot (Part 7/8)
+
+    This patch adds basic UBI (Unsorted Block Image) support to U-Boot.
+    It's based on the Linux UBI version and basically has a "OS"
+    translation wrapper that defines most Linux specific calls
+    (spin_lock() etc.) into no-ops. Some source code parts have been
+    uncommented by "#ifdef UBI_LINUX". This makes it easier to compare
+    this version with the Linux version and simplifies future UBI
+    ports/bug-fixes from the Linux version.
+
+    Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
+    Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 7e6ee7ad27de5216db1baef76f38c3429c8f4a2a
+Author: Kyungmin Park <kyungmin.park@samsung.com>
+Date:	Wed Nov 19 16:32:36 2008 +0100
+
+    UBI: Add basic UBI support to U-Boot (Part 6/8)
+
+    This patch adds basic UBI (Unsorted Block Image) support to U-Boot.
+    It's based on the Linux UBI version and basically has a "OS"
+    translation wrapper that defines most Linux specific calls
+    (spin_lock() etc.) into no-ops. Some source code parts have been
+    uncommented by "#ifdef UBI_LINUX". This makes it easier to compare
+    this version with the Linux version and simplifies future UBI
+    ports/bug-fixes from the Linux version.
+
+    Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
+    Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit c91a719daa331b5856109313371e4ece5ec06d96
+Author: Kyungmin Park <kyungmin.park@samsung.com>
+Date:	Wed Nov 19 16:28:06 2008 +0100
+
+    UBI: Add basic UBI support to U-Boot (Part 5/8)
+
+    This patch adds basic UBI (Unsorted Block Image) support to U-Boot.
+    It's based on the Linux UBI version and basically has a "OS"
+    translation wrapper that defines most Linux specific calls
+    (spin_lock() etc.) into no-ops. Some source code parts have been
+    uncommented by "#ifdef UBI_LINUX". This makes it easier to compare
+    this version with the Linux version and simplifies future UBI
+    ports/bug-fixes from the Linux version.
+
+    Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
+    Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit f412fefa079c6aa9a9763f6869bf787ea6bf6e1b
+Author: Kyungmin Park <kyungmin.park@samsung.com>
+Date:	Wed Nov 19 16:27:23 2008 +0100
+
+    UBI: Add basic UBI support to U-Boot (Part 4/8)
+
+    This patch adds basic UBI (Unsorted Block Image) support to U-Boot.
+    It's based on the Linux UBI version and basically has a "OS"
+    translation wrapper that defines most Linux specific calls
+    (spin_lock() etc.) into no-ops. Some source code parts have been
+    uncommented by "#ifdef UBI_LINUX". This makes it easier to compare
+    this version with the Linux version and simplifies future UBI
+    ports/bug-fixes from the Linux version.
+
+    Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
+    Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 2d262c4853cb5b6ddce1a28a9641f2de3688d7ea
+Author: Kyungmin Park <kyungmin.park@samsung.com>
+Date:	Wed Nov 19 16:26:54 2008 +0100
+
+    UBI: Add basic UBI support to U-Boot (Part 3/8)
+
+    This patch adds basic UBI (Unsorted Block Image) support to U-Boot.
+    It's based on the Linux UBI version and basically has a "OS"
+    translation wrapper that defines most Linux specific calls
+    (spin_lock() etc.) into no-ops. Some source code parts have been
+    uncommented by "#ifdef UBI_LINUX". This makes it easier to compare
+    this version with the Linux version and simplifies future UBI
+    ports/bug-fixes from the Linux version.
+
+    Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
+    Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 961df83361aff9a14f226214224eb8a06e05ba24
+Author: Kyungmin Park <kyungmin.park@samsung.com>
+Date:	Wed Nov 19 16:25:44 2008 +0100
+
+    UBI: Add basic UBI support to U-Boot (Part 2/8)
+
+    This patch adds basic UBI (Unsorted Block Image) support to U-Boot.
+    It's based on the Linux UBI version and basically has a "OS"
+    translation wrapper that defines most Linux specific calls
+    (spin_lock() etc.) into no-ops. Some source code parts have been
+    uncommented by "#ifdef UBI_LINUX". This makes it easier to compare
+    this version with the Linux version and simplifies future UBI
+    ports/bug-fixes from the Linux version.
+
+    Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
+    Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit f399d4a281713d5ef2d764f05d545fe61e3bd569
+Author: Kyungmin Park <kyungmin.park@samsung.com>
+Date:	Wed Nov 19 16:23:06 2008 +0100
+
+    UBI: Add basic UBI support to U-Boot (Part 1/8)
+
+    This patch adds basic UBI (Unsorted Block Image) support to U-Boot.
+    It's based on the Linux UBI version and basically has a "OS"
+    translation wrapper that defines most Linux specific calls
+    (spin_lock() etc.) into no-ops. Some source code parts have been
+    uncommented by "#ifdef UBI_LINUX". This makes it easier to compare
+    this version with the Linux version and simplifies future UBI
+    ports/bug-fixes from the Linux version.
+
+    Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
+    Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit e29c22f5abe6e0f4baa6251efed6074cdfc3db79
+Author: Kyungmin Park <kyungmin.park@samsung.com>
+Date:	Wed Nov 19 16:20:36 2008 +0100
+
+    MTD: Add MTD paritioning infrastructure
+
+    This MTD part infrastructure will be used by the upcoming
+    UBI support.
+
+    Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
+    Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 9b827cf1720acda2473afa516956eab6f7cca9a1
+Author: Selvamuthukumar <selva.muthukumar@e-coninfotech.com>
+Date:	Thu Oct 16 22:54:03 2008 +0530
+
+    Align end of bss by 4 bytes
+
+    Most of the bss initialization loop increments 4 bytes
+    at a time. And the loop end is checked for an 'equal'
+    condition. Make the bss end address aligned by 4, so
+    that the loop will end as expected.
+
+    Signed-off-by: Selvamuthukumar <selva.muthukumar@e-coninfotech.com>
+    Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 3f510db522d160179dff3ddcce9b18f6241c2c24
+Author: Becky Bruce <becky.bruce@freescale.com>
+Date:	Mon Nov 10 19:45:35 2008 -0600
+
+    mpc8641: fix address-cells default in old .dts detection
+
+    address-cells defaults to 2, not 1; so in the unlikely
+    event that it isn't specified, this patch is required
+    for correct operation.
+
+    Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
+
+commit d025aa4b20a0618a2bada0132a9a0a4afb717f1a
+Author: Becky Bruce <becky.bruce@freescale.com>
+Date:	Fri Oct 31 17:14:39 2008 -0500
+
+    lib_ppc: Move trap_init to occur earlier
+
+    Doing trap_init immediately once we're running from RAM
+    means we're no longer dependent on the physical location of
+    the flash on non-BookE platforms. Before trap_init, those
+    platforms switch to real mode and go to 0xfff00100 on exception.
+    After the switch, they go to 0x00000100  This makes it easier to
+    move the flash location.
+
+    Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
+
+commit d52082b12c6e545705a19433a2f4142526536189
+Author: Becky Bruce <becky.bruce@freescale.com>
+Date:	Fri Nov 7 13:46:19 2008 -0600
+
+    mpc8641: Try to detect old .dts files
+
+    Since we've changed the memory map of the board, be nice and
+    add some checking to try to catch out-of-date .dts files.  We do
+    this by checking the CCSRBAR location in the .dts and comparing
+    it to the CCSRBAR location in u-boot.  If they don't match, a
+    warning msg is printed.  This isn't foolproof, but it's simple and
+    will catch most of the cases where an out-of-date .dts is present,
+    including all of the cases where a new u-boot is used with an old
+    standard MPC8641 .dts file as supplied with Linux.
+
+    Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
+
+commit 8db0400a27839f91c047dcb83f4a0f09e054a180
+Author: Becky Bruce <becky.bruce@freescale.com>
+Date:	Thu Nov 6 13:04:09 2008 -0600
+
+    toplevel Makefile: Add MPC8641HPCN_36BIT target
+
+    This will enable CONFIG_PHYS_36BIT for MPC8641HPCN.
+
+    Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
+
+commit 3111d32c494e8251b90917447796a7206b757e1e
+Author: Becky Bruce <becky.bruce@freescale.com>
+Date:	Thu Nov 6 17:37:35 2008 -0600
+
+    mpc8641: Support 36-bit physical addressing
+
+    This patch creates a memory map with all the devices
+    in 36-bit physical space, in addition to the 32-bit map.
+    The CCSR relocation is moved (again, sorry) to
+    allow for the physical address to be 36 bits - this
+    requires translation to be enabled.  With 36-bit physical
+    addressing enabled, we are no longer running with VA=PA
+    translations.  This means we have to distinguish between
+    the two in the config file.  The existing region name is
+    used to indicate the virtual address, and a _PHYS variety
+    is created to represent the physical address.
+
+    Large physical addressing is not enabled by default.
+    Set CONFIG_PHYS_64BIT in the config file to turn this on.
+
+    Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
+
+commit c759a01a0022de9378a3a761f49786f87684c916
+Author: Becky Bruce <becky.bruce@freescale.com>
+Date:	Thu Nov 6 17:36:04 2008 -0600
+
+    mpc8641: Change 32-bit memory map
+
+    The memory map on the 8641hpcn is modified to look more like
+    the 85xx boards; this is a step towards a more standardized
+    layout going forward. As part of this change, we now relocate
+    the flash.
+
+    The regions for some of the mappings were far larger than they
+    needed to be.  I have reduced the mappings to match the
+    actual sizes supported by the hardware.
+
+    In addition I have removed the comments at the head
+    of the BAT blocks in the config file, rather than updating
+    them.  These get horribly out of date, and it's a simple
+    matter to look at the defines to see what they are set to
+    since everything is right here in the same file.
+
+    Documentation has been changed to reflect the new map, as this
+    change is user visible, and affects the OS which runs post-uboot.
+
+    Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
+
+commit bf9a8c34309ed9276258295db9e9212aabb2531a
+Author: Becky Bruce <becky.bruce@freescale.com>
+Date:	Wed Nov 5 14:55:35 2008 -0600
+
+    mpc86xx: Change early FLASH mapping to 1M at CONFIG_MONITOR_BASE_EARLY
+
+    We define CONFIG_MONITOR_BASE_EARLY to define the initial location
+    of the bootpage in flash.	Use this to create an early mapping
+    definition for the FLASH, and change the early_bats code to use this.
+
+    This  change facilitates the relocation of the flash since the early
+    mappings are no longer tied to the final location of the flash.
+
+    Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
+
+commit c1e1cf69547b138173f87a7f81c42a5d8dbfde3d
+Author: Becky Bruce <becky.bruce@freescale.com>
+Date:	Wed Nov 5 14:55:34 2008 -0600
+
+    mpc86xx: Use SRR0/1/rfi to enable address translation, not blr
+
+    Using a mtmsr/blr means that you have to be executing at the
+    same virtual address once you enable translation.  This is
+    unnecessarily restrictive, and is not really how this is
+    usually done.  Change it to use the more common mtspr SRR0/SRR1
+    and rfi method.
+
+    Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
+
+commit 6bf98b1362f0cb237620355ed3e6762fff82388d
+Author: Becky Bruce <becky.bruce@freescale.com>
+Date:	Wed Nov 5 14:55:33 2008 -0600
+
+    mpc8641: make DIAG_ADDR == FLASH_BASE
+
+    Currently, that's what it is, but it's hardcoded.
+
+    Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
+
+commit 170deacb1ddc39164bdb68f3963e0c0456a5369b
+Author: Becky Bruce <becky.bruce@freescale.com>
+Date:	Wed Nov 5 14:55:32 2008 -0600
+
+    mpc8641: Drop imaginary second flash bank, map 8MB
+
+    There's a lot of setup and foo for the second flash
+    bank.  The problem is, this board doesn't actually have one.
+    Clean this up.  Also, the flash is 8M in size.  Get rid
+    of the confusing aliased overmapping, and just map 8M.
+
+    Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
+
+commit 0f2d66027bfc60dc7eea2f096af8891988c5abe4
+Author: Becky Bruce <becky.bruce@freescale.com>
+Date:	Wed Nov 5 14:55:31 2008 -0600
+
+    mpc8641: only define CONFIG_ENV_SIZE once
+
+    It's currently defined twice inside in an if/else block, but
+    both halves set the same value.  Move the define outside
+    the if.
+
+    Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
+
+commit 24bfb48c35fed6ad1f047e3e4a27df302482cd93
+Author: Becky Bruce <becky.bruce@freescale.com>
+Date:	Wed Nov 5 14:55:30 2008 -0600
+
+    mpc86xx: Move setup_bats into cpu_init_f
+
+    In order to later allow for a physical relocation of the
+    flash, setup_bats, which sets up the final BAT mapping
+    for the board, needs to happen *after* init_laws().
+    Otherwise, there will be no window programmed for the flash
+    at the new physical location at the point when we change
+    the mmu translation.
+
+    Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
+
+commit 05df3e5a638be8c5b0899eae1766bbe8e4b92c17
+Author: Becky Bruce <becky.bruce@freescale.com>
+Date:	Wed Nov 5 14:55:29 2008 -0600
+
+    mpc8641: Remove extra "0" from BR2 define
+
+    Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
+
+commit edf3fe7d39a1ee07353128af5221422ce9ccfad6
+Author: Richard Retanubun <RichardRetanubun@RuggedCom.com>
+Date:	Thu Oct 23 09:08:18 2008 -0400
+
+    drivers/qe/uec_phy.c: Added PHY-less (fixed PHY) driver.
+
+    Copied over the fixed PHY driver as used in pp4xx/4xx_enet.c.
+    This adds support for PHY-less MAC connections to the UEC.
+
+    Signed-off-by: Richard Retanubun <RichardRetanubun@RuggedCom.com>
+    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 54bdcc9fb6670afde9c26dcf364f582879bf21d6
+Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+Date:	Thu Oct 23 16:27:24 2008 +0000
+
+    ColdFire: Add mii driver in drivers/net
+
+    All CF platforms' mii.c are consolidated into one
+
+    Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 25a859066b3af1070eb69f12022113c0a91bd813
+Author: Ben Warren <biggerbadderben@gmail.com>
+Date:	Mon Oct 27 23:53:17 2008 -0700
+
+    Moved initialization of PPC4xx EMAC to cpu_eth_init()
+
+    Removed initialization of the driver from net/eth.c
+
+    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+    Acked-by: Stefan Roese <sr@denx.de>
+
+commit 4d03a4e20e58552cb96d61a0e8b56cdb6cc60126
+Author: Ben Warren <biggerbadderben@gmail.com>
+Date:	Sun Nov 9 21:29:23 2008 -0800
+
+    Moved PPC4xx EMAC driver to drivers/net
+
+    Also changed path in all linker scripts that reference this driver
+
+    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+    Acked-by: Stefan Roese <sr@denx.de>
+
+commit 96e21f86e8266ed40759e5495ee461265d7f6d28
+Author: Ben Warren <biggerbadderben@gmail.com>
+Date:	Mon Oct 27 23:50:15 2008 -0700
+
+    Changed PPC4xx EMAC driver to require CONFIG_PPC4xx_EMAC
+
+    All in-tree IBM/AMCC PPC4xx boards using the EMAC get this new CONFIG
+
+    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+    Acked-by: Stefan Roese <sr@denx.de>
+
+commit 9eb79bd8856bcab896ed5e1f1bca159807a124dd
+Author: Ben Warren <biggerbadderben@gmail.com>
+Date:	Thu Oct 23 22:02:49 2008 -0700
+
+    Moved initialization of MPC8XX SCC to cpu_eth_init()
+
+    Removed initialization of the driver from net/eth.c
+
+    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit a9bec96d6359ac9f90a852962bf3040cad9e0256
+Author: Ben Warren <biggerbadderben@gmail.com>
+Date:	Wed Oct 22 23:47:51 2008 -0700
+
+    Moved initialization of MPC8220 FEC to cpu_eth_init()
+
+    Removed initialization of the driver from net/eth.c
+
+    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 0e8454e990385a58f708c2fc26d31ac041c7a6c5
+Author: Ben Warren <biggerbadderben@gmail.com>
+Date:	Wed Oct 22 23:32:48 2008 -0700
+
+    Moved initialization of QE Ethernet controller to cpu_eth_init()
+
+    Removed initialization of the driver from net/eth.c
+
+    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 3456a148276d5494b53ee40242efb6462d163504
+Author: Ben Warren <biggerbadderben@gmail.com>
+Date:	Wed Oct 22 23:20:29 2008 -0700
+
+    Moved initialization of FCC Ethernet controller to cpu_eth_init
+
+    Affected boards:
+	Several MPC8xx boards
+	Several MPC8260/MPC8272 boards
+	Several MPC85xx boards
+
+    Removed initialization of the driver from net/eth.c
+
+    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 62e15b497f5c6334c059512678c8db7940ae4c61
+Author: Ben Warren <biggerbadderben@gmail.com>
+Date:	Thu Oct 30 22:15:35 2008 -0700
+
+    Fix typo in cpu/mpc85xx/cpu.c
+
+    CONFIG_MPC85xx_FEC -> CONFIG_MPC85XX_FEC
+
+    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 5dfb3ee3f54e2382a08d72906f0e79ecf944f6e3
+Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+Date:	Sun Oct 19 12:08:50 2008 +0900
+
+    net: Move initialization of Au1x00 SoC ethernet MAC to cpu_eth_init
+
+    This patch will move au1x00_eth_initialize from net/eth.c to cpu_eth_init
+    as a part of ongoing eth_initialize cleanup work.  The function ret value
+    is also fixed as it should be negative on fail.
+
+    Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit cc94074ecac1885d18ddb683eb934b3c0268aa5b
+Author: Ben Warren <biggerbadderben@gmail.com>
+Date:	Fri Sep 5 01:55:22 2008 -0400
+
+    Moved initialization of IXP4XX_NPE Ethernet controller to cpu_eth_init()
+
+    Also, removed the driver initialization from net/eth.c
+
+    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit f2a7806fc23e82d30c8548911369e0c530607354
+Author: Clive Stubbings <uboot@xentech.co.uk>
+Date:	Mon Oct 27 15:05:00 2008 +0000
+
+    xilinx_emaclite buffer overrun
+
+    Patch to fix buffer allocation size and alignment. Buffer needs to be u32 aligned and
+    PKTSIZE_ALIGN bytes long.
+
+    Acked-by: Michal Simek <monstr@monstr.eu>
+
+    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 0115b1953718a2969f6469d3d5da51ba11e12d42
+Author: richardretanubun <richardretanubun@ruggedcom.com>
+Date:	Fri Sep 26 08:59:12 2008 -0400
+
+    NET: QE: UEC: Make uec_miiphy_read() and uec_miiphy_write() use the devname arg.
+
+    The current uec_miiphy_read and uec_miiphy_write hardcode access devlist[0]
+    This patch makes these function use the devname argument that is passed in to
+    allow access to the phy registers of other devices in devlist[].
+
+    Signed-of-by: Richard Retanubun <RichardRetanubun@RugggedCom.com>
+
+    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 44dcb7332033db8de2810f2fffcae3084f15c8d4
+Author: richardretanubun <richardretanubun@ruggedcom.com>
+Date:	Mon Oct 6 15:31:43 2008 -0400
+
+    Adds two more ethernet interface to 83xx
+
+    Fixed compiler warning "declared but unused" eth5_uec_info and eth6_uec_info.
+    Signed-off-by: Richard Retanubun <RichardRetanubun@RugggedCom.com>
+    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit d8003fa03733901b73d6c4667b4d80fc8eb1ddd3
+Author: Stelian Pop <stelian@popies.net>
+Date:	Fri Nov 7 13:54:31 2008 +0100
+
+    AT91: Replace AT91_BASE_EMAC by the board specific values.
+
+    AT91_BASE_EMAC is never used outside the board specific files,
+    so replace its usage by the board specific AT91xxx_BASE_EMAC.
+
+    Signed-off-by: Stelian Pop <stelian@popies.net>
+    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit c91e17affa175ce06afa89b04752301eb4a61666
+Author: Stelian Pop <stelian@popies.net>
+Date:	Fri Nov 7 12:09:21 2008 +0100
+
+    AT91: Replace (undefined) AT91_ID_US* by the board specific values.
+
+    AT91_ID_US0 / AT91_ID_US1 / AT91_ID_US2 were used but never defined.
+    Since they are never used outside the board specific files, they can
+    be replaced by the board specific AT91xxx_ID_US0 / AT91xxx_ID_US1 /
+    AT91xxx_ID_US2.
+
+    Bug spotted by Jesus Alvarez <jalvarez@micromint.com>.
+
+    Signed-off-by: Stelian Pop <stelian@popies.net>
+    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 28962f5a2de81bc0eed1c0b08c6bfaa1cc134ea2
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date:	Sat Nov 1 10:47:59 2008 +0100
+
+    Makefile/at91sam9: move some at91sam9 to the correct subsection for arm926ejs
+
+    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 1079432e04ccf71aa3684181186182cd63512f19
+Author: Sergey Lapin <slapin@ossfans.org>
+Date:	Fri Oct 31 12:28:43 2008 +0100
+
+    Custom AFEB9260 board support
+
+    This patch provides support for AFEB9260 board, a product of
+    OpenSource hardware and software. Some commertial projects
+    are made with this design. A board is basically AT91SAM9260-EK
+    with some modifications and different peripherals and different
+    parts used. Main purpose of this project is to gain experience in
+    hardware design.
+    More info: http://groups.google.com/group/arm9fpga-evolution-board
+    (In Russian only, sorry).
+    Subversion repository: svn://194.85.238.22/home/users/george/svn/arm9eb
+
+    Signed-off-by: Sergey Lapin <slapin@ossfans.org>
+
+commit 26eecd24f97130e56e9c2c2af0e714e05bce6e00
+Author: Tomohiro Masubuchi <tomohiro_masubuchiattripeaks.co.jp>
+Date:	Tue Oct 21 13:17:16 2008 +0900
+
+    Change to use "do_div" macro
+
+    Signed-off-by: Tomohiro Masubuchi <tomohiro_masubuchi@tripeaks.co.jp>
+
+commit e352495318d8056a00faa21b633b3e4374bfbf52
+Author: Roman Mashak <romez777@gmail.com>
+Date:	Wed Oct 22 16:00:26 2008 -0400
+
+    ARM926EJ-S: relocate OMAP specific 'cpuinfo.c' into OMAP directory
+
+    OMAP identification is implemented in 'cpuinfo.c' and located in ARM926EJ-S directory.
+    It makes sense to place this file in OMAP specific subdirectory, i.e. cpu/arm926ejs/omap
+
+    Signed-off-by: Roman Mashak <romez777@gmail.com>
+
+commit 248b2c367210c06dbd5fbdecf27e97fbe9d05fdb
+Author: Roman Mashak <romez777@gmail.com>
+Date:	Tue Oct 21 03:01:41 2008 -0700
+
+    ARM/Versatile port: Removed unused functions
+
+    Removal of never used functions.
+
+    Signed-off-by: Roman Mashak <romez777@gmail.com>
+
+commit 1266df887781c779deaf6d05eea2ef90a470cb34
+Author: Becky Bruce <becky.bruce@freescale.com>
+Date:	Mon Nov 3 15:44:01 2008 -0600
+
+    powerpc: change 86xx SMP boot method
+
+    We put the bootpg for the secondary cpus into memory and use
+    BPTR to get to it.	This is a step towards converting to the
+    ePAPR boot methodology.  Also, the code is written to
+    deal properly with more than 4GB of RAM.
+
+    Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
+
+commit b5431560682d8f318fbc49db87cfe13ab41d2ee4
+Author: Becky Bruce <becky.bruce@freescale.com>
+Date:	Fri Oct 31 17:13:49 2008 -0500
+
+    8641HPCN: Config file cleanup
+
+    There are several items in the config file that were hardcoded
+    but that should really be based on other config options, since
+    the regions are contiguous and depend on being so.	This cleans
+    that up a bit.  Also, add BR_PHYS_ADDR() macro to convert
+    addresses into the proper format for BR registers.
+
+    Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
+
+commit 4c77de3f144ca088c3867bd6240718c10f5a9d69
+Author: Becky Bruce <becky.bruce@freescale.com>
+Date:	Fri Oct 31 17:13:32 2008 -0500
+
+    86xx: Make dram_size a phys_size_t
+
+    It's currently a long and should be phys_size_t.
+
+    Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
+
+commit 104992fc541302a6bac74448e01e7fdad20abca0
+Author: Becky Bruce <becky.bruce@freescale.com>
+Date:	Sun Nov 2 18:19:32 2008 -0600
+
+    powerpc 86xx: Handle CCSR relocation earlier
+
+    Currently, the CCSR gets relocated while translation is
+    enabled, meaning we need 2 BAT translations to get to both the
+    old location and the new location.	Also, the DEFAULT
+    CCSR location has a dependency on the BAT that maps the
+    FLASH region.  Moving the relocation removes this unnecessary
+    dependency. This makes it easier and more intutive to
+    modify the board's memory map.
+
+    Swap BATs 3 and 4 on 8610 so that all 86xx boards use the same
+    BAT for CCSR space.
+
+    Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
+
+commit af5d100e8d5cd49d69d52d20f1181eb06ddb4ddf
+Author: Becky Bruce <becky.bruce@freescale.com>
+Date:	Fri Oct 31 17:14:14 2008 -0500
+
+    mpc8641: Make PCI and RIO mutually exclusive, fix non-PCI build
+
+    You can't actually have both, and with some coming changes to
+    change the memory map for the board and support 36-bit physical,
+    we need the extra BAT that is being consumed by having both.
+
+    I also make non-PCI configs build cleanly, for the sake of sanity.
+
+    Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
+
+commit 98693b85d42ff438375dc6d6dcadc70eb7b050bb
+Author: Becky Bruce <becky.bruce@freescale.com>
+Date:	Fri Oct 31 17:14:00 2008 -0500
+
+    mpc8641: Stop supporting non-PCI_PNP configs
+
+    We don't actually ever do this, remove the code so we
+    can stop maintaining it.
+
+    Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
+
+commit e4f69d1bd21a12049744989d2dd6b5199c9b8f23
+Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+Date:	Fri Oct 24 12:59:12 2008 +0000
+
+    ColdFire: Fix M5329EVB and M5373EVB nand issue
+
+    Fix compilation issue caused by a few mismatches.
+    Provide proper nand chip select enable/disable in
+    nand_hwcontrol() rather than in board_nand_init()
+    just enable once. Remove redundant local nand driver
+    functions - nand_read_byte(), nand_write_byte() and
+    nand_dev_ready() to use common nand driver.
+
+    Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+
+commit 1b2708442224a551a0b865b52710306333888932
+Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+Date:	Wed Oct 22 11:55:30 2008 +0000
+
+    ColdFire: Fix compilation error
+
+    The error was caused by the change for strmhz() in cpu.c.
+    A few of them were one extra close parenthesis.
+
+    Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+
+commit 536e7dac16769954915a484e682a2efb28699133
+Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+Date:	Wed Oct 22 11:38:21 2008 +0000
+
+    ColdFire: Add MCF5301x CPU and M53017EVB support
+
+    Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+
+commit a21d0c2cc9add8894d971ab791f4032f077db817
+Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+Date:	Tue Oct 21 15:37:02 2008 +0000
+
+    ColdFire: Add SBF support for M52277EVB
+
+    Add serial boot support
+
+    Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+
+commit b202816c61042c183fe67d097a5893b0f2dafba0
+Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+Date:	Tue Oct 21 14:19:26 2008 +0000
+
+    ColdFire: Use CFI driver for M5272C3
+
+    Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+
+commit f3962d3f574e5a1cffacd4e9bc48713060a2a314
+Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+Date:	Tue Oct 21 13:47:54 2008 +0000
+
+    ColdFire: Relocate FEC's GPIO and mii functions protocols
+
+    Place FEC pin assignments in cpu_init.c from platform's
+    mii.c
+
+    Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+
+commit 6e80f5aa09f8d41bac50b38dc7488ecd22107802
+Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+Date:	Tue Oct 21 12:15:44 2008 +0000
+
+    ColdFire: Remove platforms mii.c file
+
+    Will use mcfmii.c driver in drivers/net rather than
+    keep creating new mii.c for each future platform.
+    Remove EB+MCF-EV123, cobra5272, idmr, M5235EVB,
+    M5271EVB, M5272C3, M5275EVB, M5282EVB, M5329EVB,
+    M5373EVB, M54451EVB, M54455EVB, M547xEVB, and M548xEVB's
+    mii.c
+
+    Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+
+commit 012522fef3b382469125beb46a315ab4dee02fb0
+Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+Date:	Tue Oct 21 10:03:07 2008 +0000
+
+    ColdFire: Modules header files cleanup
+
+    Consolidate ATA, ePORT, QSPI, FlexCan, PWM, RNG,
+    MDHA, SKHA, INTC, and FlexBus structures and
+    definitions in immap_5xxx.h to more unify modules
+    header files. Append DSPI support for m547x_8x.
+    SSI cleanup. Remove USB Host structure from immap_539.h.
+    Apply changes to use FlexBus structures in mcf52x2's
+    cpu_init.c and platform configuration files.
+
+    Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+
+commit ac2331aee99ad36be0fcfed8c49922e3c61b576d
+Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+Date:	Tue Oct 21 08:52:36 2008 +0000
+
+    ColdFire: Remove linker file
+
+    Each different build for M54455EVB and M5235EVB will
+    create a u-boot.lds linker file. It is redundant to
+    keep the u-boot.lds
+
+    Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+
+commit 0829323073c505556ed5f5073f91adb504584d45
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date:	Fri Oct 31 11:26:44 2008 -0500
+
+    ppc: Fix compile warnings when !CONFIG_OF_LIBFDT
+
+    Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit a80b21d5127583171d6e9bc7f722947641898012
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date:	Fri Oct 31 12:12:12 2008 +0100
+
+    common/Makefile: create others group for non core, environment and command files
+
+    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 60c68d9c1c6d18ce02c862a05718fd94f97c13d0
+Author: Wolfgang Denk <wd@denx.de>
+Date:	Fri Oct 31 01:13:37 2008 +0100
+
+    TQM8260: use CFI flash driver instead of custom driver.
+
+    Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 20d04774f4ef3f6e38974636e0e36ae0f0b5501f
+Author: Andy Fleming <afleming@freescale.com>
+Date:	Thu Oct 30 17:35:30 2008 -0500
+
+    Consolidate MAX/MIN definitions
+
+    There were several, now there is one (two if you count the lower-case
+    versions).
+
+    Signed-off-by: Andy Fleming <afleming@freescale.com>
+
+commit 298e476c66fd88d0bc4f0371118652d2b5de4e8a
+Author: Heiko Schocher <hs@denx.de>
+Date:	Thu Oct 30 09:23:09 2008 +0100
+
+    mgsuvd: remove unused defines in config file.
+
+    Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit 3cbd823116ea8b7c654e275a8c2fca87cd1f5dc5
+Author: Wolfgang Denk <wd@denx.de>
+Date:	Sun Nov 2 16:14:22 2008 +0100
+
+    Coding Style cleanup, update CHANGELOG
+
+    Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit a47f957ab523019992fdef857af01bd71c58a4da
+Author: Alessandro Rubini <rubini-list@gnudd.com>
+Date:	Fri Oct 31 22:33:21 2008 +0100
+
+    NAND: Allow NAND and OneNAND to coexist
+
+    This removes in nand.h code that is verbatim duplicated from bbm.h,
+    including directly bbm.h in nand.h. The previous state of affairs
+    prevented compiling code for a board hosting both NAND and OneNAND chips.
+
+    Reported-by: Scott Wood <scottwood@freescale.com>
+    Signed-off-by: Alessandro Rubini <rubini@unipv.it>
+    Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit 2f77c7f45b9a37ef265a8dbe3c18efa706fed214
+Author: Scott Wood <scottwood@freescale.com>
+Date:	Fri Oct 31 13:51:12 2008 -0500
+
+    JFFS2: Eliminate compiler error when both NAND and OneNAND are enabled.
+
+    Reported-by: Alessandro Rubini <rubini-list@gnudd.com>
+    Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit c57fc28947e248fb03c49a28b467686299895055
+Author: Jason Jin <Jason.Jin@freescale.com>
+Date:	Fri Oct 31 05:07:04 2008 -0500
+
+    NAND: Add NAND support for MPC8536DS board
+
+    This patch defines 1M TLB&LAW size for NAND on MPC8536DS, assigns 0xffa00000
+    for CONFIG_SYS_NAND_BASE and adds other NAND supports in config file.
+    It also moves environment(CONFIG_ENV_ADDR) outside of u-boot image.
+
+    Singed-off-by: Jason Jin <Jason.Jin@freescale.com>
+    Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
+    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 6fc110bd8a8d642b8f7b0653bd9a08a0b7c3d50b
+Author: Haiying Wang <Haiying.Wang@freescale.com>
+Date:	Fri Oct 31 05:06:14 2008 -0500
+
+    NAND: Fix CONFIG_ENV_ADDR for MPC8572DS
+
+    CONFIG_ENV_ADDR should be (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE).
+
+    Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
+    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 51b572a801be57790fe26adaa530210e7fba59cc
+Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+Date:	Fri Oct 24 10:49:48 2008 +0900
+
+    sh: rsk7203: Moved rsk7203 board to board/renesas
+
+    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit 58453b00b3ebb26aaa901210023f99504a90bb00
+Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+Date:	Fri Oct 24 10:48:31 2008 +0900
+
+    sh: MigoR: Moved MigoR board to board/renesas
+
+    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit c1da2a22817ba85b437afa2f4e715e658b219fd1
+Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+Date:	Fri Oct 24 10:39:44 2008 +0900
+
+    sh: r2dplus: Moved r2dplus board to board/renesas
+
+    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit 78385bf2359d828184d0b3649f7ae6b933420000
+Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+Date:	Fri Oct 24 10:36:13 2008 +0900
+
+    sh: sh7763rdp: Moved sh7763rdp board to board/renesas
+
+    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit c6525d459c350bfc246ea7826456af77e1e314eb
+Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+Date:	Fri Oct 24 10:35:19 2008 +0900
+
+    sh: sh7785lcr: Moved sh7785lcr board to board/renesas
+
+    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit acd3e30d09a73f876222f0d496c4f52ee9d0771d
+Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+Date:	Fri Oct 24 10:34:21 2008 +0900
+
+    sh: r7780mp: Moved r7780mp board to board/renesas
+
+    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit f84e6ea275353b8fea772ec7553ff7e4b1f642e0
+Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+Date:	Fri Oct 24 10:32:14 2008 +0900
+
+    sh: ap325rxa: Moved ap325rxa board to board/renesas
+
+    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit 9abda6ba735efb059f63dcb25d78b174bfcad1ad
+Author: Wolfgang Denk <wd@xpert.denx.de>
+Date:	Fri Oct 31 01:12:28 2008 +0100
+
+    CFI Driver: Fix "flash not ready" problem
+
+    This patch fixes a problem on systems where the NOR flash is attached
+    to a 64 bit bus.  The toggle bit detection in flash_toggle() is based
+    on the assumption that the same flash address is read twice without
+    any other interjacent flash accesses.  However, on 32 bit systems the
+    function flash_read64() [as currently implemented] does not perform
+    an atomic 64 bit read - instead, this is broken down into two 32 bit
+    read accesses on addresses "addr" and "addr + 4".  So instead of
+    reading a 64 bit value twice from "addr", we see a sequence of 4 32
+    bit reads from "addr", "addr + 4", "addr", and "addr + 4".	The
+    consequence is that flash_toggle() fails to work.
+
+    This patch implements a simple, but somewhat ugly solution, as it
+    avoids the use of flash_read64() in this critical place (by breaking
+    it down manually into 32 bit read operations) instead of rewriting
+    flash_read64() such to perform atomic 64 bit reads as one could
+    expect.  However, such a rewrite would require the use of floating
+    point load operations, which becomes pretty complex:
+
+	save MSR;
+	set Floating Point Enable bit in MSR;
+	use "lfd" instruction to perform atomic 64 bit read;
+	use "stfd" to store value to temporary variable on stack;
+	load u64 value from temporary variable;
+	restore saved MSR;
+	return u64 value;
+
+    The benefit-cost ratio of such an implementation was considered too
+    bad to actually attempt this, especially as we can expect that such
+    an implementation would not only have a bigger memory footprint but
+    also cause a performance degradation.
+
+    Signed-off-by: Wolfgang Denk <wd@denx.de>
+    Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit cdd4fe63b094d4b767f12ff241d72566b461ee61
+Author: Stefan Roese <sr@denx.de>
+Date:	Fri Oct 31 10:48:08 2008 +0100
+
+    ppc4xx: Fix spelling error in MAINTAINERS file
+
+    Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit be270798900b75ad9c47c7b79c72f70441196c56
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date:	Tue Oct 28 13:37:00 2008 +0100
+
+    ppc4xx: Update PMC440 board support
+
+    This patch brings PMC440 board support up to date:
+
+    - fix GPIO configuration
+    - add misc_init_f()
+    - use better values for usbact variable
+    - fix USB 2.0 phy reset sequence
+    - shrink BAR2 to save PCI address space
+    - add FDT support
+
+    Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+    Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 75183b1a7fc04206d9779d13f16e03853d7e965d
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date:	Tue Oct 28 13:36:59 2008 +0100
+
+    ppc4xx: Fix PMC440 BSP commands
+
+    This patch fixes the PMC440 BSP commands painit and selfreset
+
+    Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+    Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 76b565b69f886d5ae748db65e44f464b0e70d41a
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date:	Tue Oct 28 13:36:58 2008 +0100
+
+    ppc4xx: Update PMC440 board configuration
+
+    Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+    Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit ca0c2d42b93116a8e1b8ef8ad4493c7dc9b5f2e4
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date:	Tue Oct 28 13:36:57 2008 +0100
+
+    ppc4xx: Fix esd loadpci command
+
+    This patch fixes esd's loadpci command when not all
+    memory on adapter boards is accessable via PCI.
+
+    Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+    Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 492aa9ea13791ca4591b5bde895a425e27ae2d10
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date:	Tue Oct 28 13:36:56 2008 +0100
+
+    ppc4xx: Clean up PMC440 header
+
+    -Codingstyle cleanup
+    -Remove unused GPIO define
+
+    Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+    Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 295133258a44f97a57fb2ec339aecfda11f4db95
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date:	Tue Oct 28 13:36:55 2008 +0100
+
+    ppc4xx: Handle other board variant in PMC440 FPGA code
+
+    Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+    Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit cc2dc9b08cf7c09f9f237f8cb9303f11603d4fb0
+Author: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
+Date:	Mon Oct 27 12:35:59 2008 +0100
+
+    ppc4xx: Merge xilinx-ppc440 and xilinx-ppc405 cfg
+
+    Xilinx ppc440 and ppc405 have many similarities. This patch merge the
+    config files of both infrastuctures
+
+    Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
+    Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 3befd85633d33c4dcca1f359c3f4848c5ab8e4d2
+Author: Stefan Roese <sr@denx.de>
+Date:	Sat Oct 25 06:45:31 2008 +0200
+
+    ppc4xx: Correctly configure the GPIO pin muxing on Arches
+
+    Arches doesn't use PerCS3 but GPIO43, so let's configure the GPIO
+    pin multiplexing correctly
+
+    Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 7c84fe6a06dad9f793ed85b39b1e6c11a7882f5c
+Author: Bartlomiej Sieka <tur@semihalf.com>
+Date:	Thu Oct 30 23:22:04 2008 +0100
+
+    Fix to the auto-update feature documentation (CONFIG_UPDATE_TFTP_MSEC_MAX)
+
+    Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
+
+commit 4bc7deee9095f21e243b724ca3d634251c1d5432
+Author: David Gibson <david@gibson.dropbear.id.au>
+Date:	Wed Oct 29 23:27:45 2008 -0500
+
+    libfdt: Fix bug in fdt_subnode_offset_namelen()
+
+    There's currently an off-by-one bug in fdt_subnode_offset_namelen()
+    which causes it to keep searching after it's finished the subnodes of
+    the given parent, and into the subnodes of siblings of the original
+    node which come after it in the tree.
+
+    Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
+    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit f242a08871839eac081ba5b599af979f3a148a0d
+Author: Peter Korsgaard <jacmet@sunsite.dk>
+Date:	Tue Oct 28 08:26:52 2008 +0100
+
+    fdt_resize(): ensure minimum padding
+
+    fdt_add_mem_rsv() requires space for a struct fdt_reserve_entry
+    (16 bytes), so make sure that fdt_resize at least adds that much
+    padding, no matter what the location or size of the fdt is.
+
+    Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
+    Acked-by: Andy Fleming <afleming@freescale.com>
+
+commit d685b74c64a38849f1a129b3ab846fbf67dd937e
+Author: Dave Liu <daveliu@freescale.com>
+Date:	Thu Oct 23 21:59:35 2008 +0800
+
+    74xx: use r4 instead of r2 in lock_ram_in_cache and unlock_ram_in_cache
+
+    The patch is following the commit 392438406041415fe64ab8748ec5ab5ad01d1cf7
+
+    mpc86xx: use r4 instead of r2 in lock_ram_in_cache and unlock_ram_in_cache
+
+    This is needed in unlock_ram_in_cache() because it is called from C and
+    will corrupt the small data area anchor that is kept in R2.
+
+    lock_ram_in_cache() is modified similarly as good coding practice, but
+    is not called from C.
+
+    Signed-off-by: Nick Spence <nick.spence@freescale.com>
+
+    also, the r2 is used as global data pointer.
+
+    Signed-off-by: Dave Liu <daveliu@freescale.com>
+
+commit e053ab1903ccae6048ef759025b9f675bba91450
+Author: Scott Wood <scottwood@freescale.com>
+Date:	Tue Oct 28 11:45:04 2008 -0500
+
+    mpc83xx pci: Round up memory size in inbound window.
+
+    The current calculation will fail to cover all memory if
+    its size is not a power of two.
+
+    Signed-off-by: Scott Wood <scottwood@freescale.com>
+    Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 1c671977dc81359628be27ac99c174e76e8069ba
+Author: Dave Liu <daveliu@freescale.com>
+Date:	Thu Oct 23 21:19:13 2008 +0800
+
+    86xx: remove the unused definition
+
+    Signed-off-by: Dave Liu <daveliu@freescale.com>
+
+commit eaa44c5dc83756c3067b9e6c9db626facd0b0660
+Author: Dave Liu <daveliu@freescale.com>
+Date:	Tue Oct 28 17:47:49 2008 +0800
+
+    86xx: remove the redundant r2 global data pointer save
+
+    The commit 67256678f00c09b0a7f19e862e5c1847553d31bc add
+    the another global data pointer save, but in fact the
+    global data pointer will be initialized in the board_init_r,
+    so remove it such as the 85xx/83xx family.
+
+    Signed-off-by: Dave Liu <daveliu@freescale.com>
+    Acked-by: Kumar Gala <kumar.gala@freescale.com>
+
+commit bd888e9544419665334a6f47f81f34011cea38f3
+Author: Dave Liu <daveliu@freescale.com>
+Date:	Tue Oct 28 17:47:41 2008 +0800
+
+    86xx: remove the unused code for 86xx family
+
+    I believe these code was copied from 74xx family, but for
+    86xx, it is unused.
+
+    Signed-off-by: Dave Liu <daveliu@freescale.com>
+    Acked-by: Kumar Gala <kumar.gala@freescale.com>
+
+commit 5ba1ef507402bc5e344dc374203792a40f222e8a
+Author: Dave Liu <daveliu@freescale.com>
+Date:	Tue Oct 28 17:46:35 2008 +0800
+
+    86xx: remove the second DDR LAW setting for mpc8641hpcn
+
+    The DDR1 LAW will precedence the DDR2 LAW, so remove
+    the second DDR LAW.
+
+    Signed-off-by: Dave Liu <daveliu@freescale.com>
+    Acked-by: Becky Bruce <becky.bruce@freescale.com>
+
+commit 137a2dfd11ac51ae3154f13f323609b33a4a072e
+Author: Dave Liu <daveliu@freescale.com>
+Date:	Tue Oct 28 17:46:23 2008 +0800
+
+    86xx: remove the unused ddr_enable_ecc in the board file
+
+    The DDR controller of 86xx processors have the ECC data init
+    feature, and the new DDR code is using the feature, we don't
+    need the way with DMA to init memory again.
+
+    Signed-off-by: Dave Liu <daveliu@freescale.com>
+    Acked-by: Kumar Gala <kumar.gala@freescale.com>
+
+commit dc2adad85bf580d65916c940683f6e9671e8a5dd
+Author: Dave Liu <daveliu@freescale.com>
+Date:	Tue Oct 28 17:46:12 2008 +0800
+
+    86xx: Move the clear_tlbs before MMU turn on
+
+    We must invalidate TLBs before MMU turn on, but
+    currently the code is not, if there are some stale
+    TLB entry valid in the TLBs, it will cause strange
+    issue.
+
+    Signed-off-by: Dave Liu <daveliu@freescale.com>
+    Acked-by: Becky Bruce <becky.bruce@freescale.com>
+
+commit 5cdade07b118d07154cb882650f9778cecc8a87c
+Author: Scott Wood <scottwood@freescale.com>
+Date:	Mon Oct 27 15:57:08 2008 -0500
+
+    mpc8313erdb: Document NAND boot.
+
+    Previously, the documentation claimed that NAND boot is not supported.
+    This is no longer true.
+
+    Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit bd78bc6b2aebf5566aac464f936b88dfd97ab0bd
+Author: Scott Wood <scottwood@freescale.com>
+Date:	Wed Oct 29 14:20:26 2008 -0500
+
+    NAND: Properly create JFFS2 cleanmarkers.
+
+    As reported by Ilko Iliev <iliev@ronetix.at>, the "nand erase clean"
+    command is currently broken, and among other things causes all blocks
+    to be marked bad.
+
+    This implements it properly using MTD_OOB_AUTO, along with some
+    indentation fixes.
+
+    Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit f7fe57c09866b44692d18c8cf22828bd137ec58d
+Author: Scott Wood <scottwood@freescale.com>
+Date:	Wed Oct 29 13:42:41 2008 -0500
+
+    NAND fsl elbc: Set FMR[ECCM] based on page size.
+
+    Hardware expects ECCM 0 for small page and ECCM 1 for large page
+    when booting from NAND, so use those defaults.
+
+    Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit c013b74975dab0805ef6d369b013230c4e8a660d
+Author: Haiying Wang <Haiying.Wang@freescale.com>
+Date:	Wed Oct 29 13:32:59 2008 -0400
+
+    NAND: Add support for MPC8572DS board
+
+    This patch defines 1M TLB&LAW size for NAND on MPC8572DS, assigns
+    0xffa00000 for CONFIG_SYS_NAND_BASE and adds other NAND supports in
+    config file.
+
+    It also moves environment(CONFIG_ENV_ADDR) outside of u-boot image, to
+    make room for the increased code size with NAND enabled.
+
+    Signed-off-by: Jason Jin <Jason.Jin@freescale.com>
+    Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
+    Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit 4e190b03aaf2309bd2e025d1187a2ca880fedc95
+Author: Haiying Wang <Haiying.Wang@freescale.com>
+Date:	Wed Oct 29 11:05:55 2008 -0400
+
+    Make Freescale local bus registers available for both 83xx and 85xx.
+
+    - Rename lbus83xx_t to fsl_lbus_t and move it to asm/fsl_lbc.h so that it
+      can be shared by both 83xx and 85xx
+    - Remove lbus83xx_t and replace it with fsl_lbus_t in all 83xx boards
+      files which use lbus83xx_t.
+    - Move FMR, FIR, FCR, FPAR, LTESR from mpc83xx.h to asm/fsl_lbc.h so that
+      85xx can share them.
+
+    Signed-off-by: Jason Jin <Jason.Jin@freescale.com>
+    Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
+    Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit 695c130e4bf75b444720ddfd83aca88f41c046cf
+Author: Scott Wood <scottwood@freescale.com>
+Date:	Mon Oct 27 15:38:30 2008 -0500
+
+    NAND: Align right column of the shorthelp with other commands.
+
+    I accidentally broke this in when making consistent the partial
+    alignment of the longhelp.
+
+    Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit 33efde5ecac91ab118ff00b95a181fd6d75f8645
+Author: Karl Beldan <karl.beldan@gmail.com>
+Date:	Mon Sep 15 16:08:03 2008 +0200
+
+    NAND: Reset chip on power-up
+
+    Some chips require a RESET after power-up (e.g. Micron MT29FxGxxxxx).
+    The first command sent is NAND_CMD_READID.
+    Issue a NAND_CMD_RESET in nand_scan_ident before reading the device id.
+    Tested with an MT29F4G08AAC.
+
+    Signed-off-by: Karl Beldan <karl.beldan@gmail.com>
+    Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit c45912d8abc52de796b9059a58faf7c4166eab58
+Author: Scott Wood <scottwood@freescale.com>
+Date:	Fri Oct 24 16:20:43 2008 -0500
+
+    NAND: sync with 2.6.27
+
+    This brings the core NAND code up to date with the Linux kernel.
+
+    Since there were several drivers in Linux as of the last update that are
+    not in u-boot, I'm not bringing over new drivers that have been added
+    since in the absence of an interested party.
+
+    I did not update OneNAND since it was recently synced by Kyungmin Park,
+    and I'm not sure exactly what the common ancestor is.
+
+    Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit b1d0db1805c3395149777e507b6da53410abac4e
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date:	Tue Oct 21 17:25:47 2008 -0500
+
+    bootm: Added CONFIG_BOOTM_{LINUX, NETBSD, RTEMS}
+
+    Added the ability to config out bootm support for Linux, NetBSD, RTEMS
+
+    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 5a98127d81a6eefc5a78a704df619bfe362eeb87
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date:	Tue Oct 21 17:25:46 2008 -0500
+
+    bootm: support subcommands in linux ppc bootm
+
+    Add support for 'bdt', 'cmdline', 'prep' to the linux PPC bootm.
+
+    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 49c3a861d11735838f1f1b11999ce433006dc919
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date:	Tue Oct 21 17:25:45 2008 -0500
+
+    bootm: Add subcommands
+
+    Add the ability to break the steps of the bootm command into several
+    subcommands: start, loados, ramdisk, fdt, bdt, cmdline, prep, go.
+
+    This allows us to do things like manipulate device trees before
+    they are passed to a booting kernel or setup memory for a secondary
+    core in multicore situations.
+
+    Not all OS types support all subcommands (currently only start, loados,
+    ramdisk, fdt, and go are supported).
+
+    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit be08315933537f061bc1ce61f33a29c56458bbad
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date:	Tue Oct 21 17:25:44 2008 -0500
+
+    bootm: Move to using a function pointer table for the boot os function
+
+    This removes a bit of code and makes it easier for the upcoming sub bootm
+    command support to call into the proper OS specific handler.
+
+    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+    Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit a369f4a492fa2805d87775d27380f0eeaca35aa6
+Author: Graeme Russ <graeme.russ@gmail.com>
+Date:	Mon Sep 29 23:03:14 2008 +1000
+
+    i386: Renamed show_boot_progress in assembler code
+
+    Renamed show_boot_progress in assembler init phase to
+    show_boot_progress_asm to avoid link conflicts with C version
+
+    Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
+
+commit 4442f45b0e1cbad35aa22d4cad22b90a57e3f32d
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date:	Mon Oct 27 16:42:00 2008 -0500
+
+    85xx: Update MPC85xx_PORDEVSR_IO_SEL mask
+
+    The MPC8572 has a 4-bit wide PORDEVSR IO_SEL field. Other MPC85xx
+    processors have a 3-bit wide IO_SEL field but have the most
+    significant bit is wired to 0 so this change should not affect
+    them.
+
+    Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit cd4251624205cb97104f6e32679dc7754934f711
+Author: Becky Bruce <becky.bruce@freescale.com>
+Date:	Mon Oct 27 16:09:42 2008 -0500
+
+    powerpc: fix pci window initialization to work with > 4GB DRAM
+
+    The existing code has a few errors that need to be fixed in
+    order to support large RAM sizes.  Fix those, and add a
+    comment to make it clearer.
+
+    Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
+    Acked-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 219542a1a66ca017b12860920714a9859b18a5d7
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date:	Mon Oct 27 13:16:20 2008 -0500
+
+    pci/fsl_pci_init: Removed a bunch pointless trailing backslashes.
+
+    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 6b59e03e0237a40a2305ea385defdfd92000978b
+Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+Date:	Mon Sep 1 16:21:22 2008 +0200
+
+    lcd: Let the board code show board-specific info
+
+    The information displayed when CONFIG_LCD_INFO is set is inherently
+    board-specific, so it should be done by the board code. The current code
+    dealing with this only handles two cases, and is already a horrible mess
+    of #ifdeffery.
+
+    Yes, this duplicates some code, but it also allows boards to print more
+    board-specific information; this used to be very difficult.
+
+    Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+    Signed-off-by: Anatolij Gustschin <agust@denx.de>
+
+commit 6f93d2b8fca504200a5758f7c6dd2d6852900765
+Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+Date:	Mon Sep 1 16:21:21 2008 +0200
+
+    lcd: Set lcd_is_enabled before clearing the screen
+
+    This allows the logo/info rendering routines to use the regular
+    lcd_putc/lcd_puts/lcd_printf calls.
+
+    Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+    Signed-off-by: Anatolij Gustschin <agust@denx.de>
+
+commit 15b17ab52b7c15d46d9fc631cc06092e1e764de2
+Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+Date:	Mon Sep 1 16:21:20 2008 +0200
+
+    lcd: Implement lcd_printf()
+
+    lcd_printf() has a prototype in include/lcd.h but no implementation. Fix
+    this by borrowing the lcd_printf() implementation from the cogent board
+    code (which appears to use its own LCD framework.)
+
+    Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+    Signed-off-by: Anatolij Gustschin <agust@denx.de>
+
+commit 70dbc54c0a5c798bcf82ae2a1e227404f412e892
+Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+Date:	Mon Sep 1 16:21:19 2008 +0200
+
+    atmel_lcdfb: Straighten out funky vl_sync logic
+
+    If the board _didn't_ request INVLINE_INVERTED, we set INVLINE_INVERTED,
+    otherwise we don't. WTF?
+
+    Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+    Signed-off-by: Anatolij Gustschin <agust@denx.de>
+
+commit 23bb28f0f76b46c4b573374b0bb3b3f23d85ef55
+Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+Date:	Mon Sep 1 16:21:18 2008 +0200
+
+    atmel_lcdfb: Eliminate unneeded #include <asm/arch/hardware.h>
+
+    atmel_lcdfb doesn't actually need anything from asm/arch/hardware.h. It
+    includes a file that does, asm/arch/gpio.h, but this file doesn't
+    include <asm/arch/hardware.h> like it's supposed to.
+
+    Add the missing include to asm/arch/gpio.h and remove the workaround
+    from the atmel_lcdfb driver. This makes the driver compile on avr32.
+
+    Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+    Signed-off-by: Anatolij Gustschin <agust@denx.de>
+
+commit c2083e0e11a03ef8be2e9f0ed8720fdc20832f3e
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date:	Wed Oct 22 14:38:55 2008 -0500
+
+    86xx: Convert all fsl_pci_init users to new APIs
+
+    Converted MPC8610HCPD, MPC8641HPCN, and SBC8641D to use
+    fsl_pci_setup_inbound_windows() and ft_fsl_pci_setup().
+
+    With these changes the board code is a bit smaller and we get dma-ranges
+    set in the device tree for these boards.
+
+    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+    Signed-off-by: Andrew Fleming-AFLEMING <afleming@freescale.com>
+    Acked-by: Jon Loeliger <jdl@freescale.com>
+
+commit 2dba0dea98c0dee1799ffd6fd6eb541645dbbd98
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date:	Tue Oct 21 08:28:33 2008 -0500
+
+    85xx: Convert all fsl_pci_init users to new APIs
+
+    Converted ATUM8548, MPC8536DS, MPC8544DS, MPC8548CDS, MPC8568MDS,
+    MPC8572DS, TQM85xx, and SBC8548 to use fsl_pci_setup_inbound_windows()
+    and ft_fsl_pci_setup().
+
+    With these changes the board code is a bit smaller and we get dma-ranges
+    set in the device tree for these boards.
+
+    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+    Signed-off-by: Andrew Fleming-AFLEMING <afleming@freescale.com>
+
+commit a2aab460727e5f674353a83a81000ef794bffcae
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date:	Thu Oct 23 00:01:06 2008 -0500
+
+    pci/fsl_pci_init: Added fdt helper for setting up bus-ranges & dma-ranges
+
+    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+    Signed-off-by: Andrew Fleming-AFLEMING <afleming@freescale.com>
+
+commit b9a1fa9787a3a79573f5f932a4f8aa216bcb1785
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date:	Wed Oct 22 14:06:24 2008 -0500
+
+    pci/fsl_pci_init: Add a common PCI inbound setup function
+
+    Add a common setup function that determines the pci_region(s) based
+    on how much memory we have in the system.
+
+    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+    Signed-off-by: Andrew Fleming-AFLEMING <afleming@freescale.com>
+
+commit 612ea01018a459234d54ed57ec6a5a244ce75678
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date:	Tue Oct 21 10:13:14 2008 -0500
+
+    pci/fsl_pci_init: Enable larger address and setting inbound windows properly
+
+    * PCI Inbound window was setup incorrectly.  The PCI address and system
+      address were swapped.  The PCI address should be setting piwar/piwbear
+      and the system address should be setting pitar.
+
+    * Removed masking of addresses to allow for system address to support
+      system address & PCI address >32-bits
+
+    * Set PIWBEAR & POTEAR to allow for full 64-bit PCI addresses
+
+    * Respect the PCI_REGION_PREFETCH for inbound windows
+
+    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+    Signed-off-by: Andrew Fleming-AFLEMING <afleming@freescale.com>
+
+commit 8ab451c46b846f2bbd7122b29ffdd9a4a04da228
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date:	Wed Oct 22 23:33:56 2008 -0500
+
+    fdt: Added helper to set PCI dma-ranges property
+
+    Added fdt_pci_dma_ranges() that parses the pci_region info from the
+    struct pci_controller and populates the dma-ranges based on it.
+
+    The max # of windws/dma-ranges we support is 3 since on embedded
+    PowerPC based systems this is the max number of windows.
+
+    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+    Signed-off-by: Andrew Fleming-AFLEMING <afleming@freescale.com>
+
+commit 3bed2aaf2d50fd13273c14d17d4fd40ef42e0d0f
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date:	Thu Oct 23 00:05:47 2008 -0500
+
+    fdt: Add fdt_getprop_u32_default helpers
+
+    Add helper functions to return find a node and return it's property
+    or a default value.
+
+    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+    Signed-off-by: Andrew Fleming-AFLEMING <afleming@freescale.com>
+    Acked-by: Gerald Van Baren <vanbaren@cideas.com>
+
+commit 8ba93f68a1bae89e033527ce67b41b4a87aa5b7f
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date:	Tue Oct 21 18:06:15 2008 -0500
+
+    86xx: Enable 64-bit PCI resources on all Freescale boards
+
+    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+    Signed-off-by: Andrew Fleming-AFLEMING <afleming@freescale.com>
+
+commit 0151cbaccf4504821ecfde0217299bd740086bb6
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date:	Tue Oct 21 11:33:58 2008 -0500
+
+    85xx: Enable 64-bit PCI resources on all Freescale boards
+
+    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+    Signed-off-by: Andrew Fleming-AFLEMING <afleming@freescale.com>
+
+commit 30e76d5e3bc4c5208ee63585fe12b409d9308cd8
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date:	Tue Oct 21 08:36:08 2008 -0500
+
+    pci: Allow for PCI addresses to be 64-bit
+
+    PCI bus is inherently 64-bit.  While not all system require access to
+    the full 64-bit PCI address range some do.	This allows those systems
+    to enable the full PCI address width via CONFIG_SYS_PCI_64BIT.
+
+    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+    Signed-off-by: Andrew Fleming-AFLEMING <afleming@freescale.com>
+    Acked-by: Wolfgang Denk <wd@denx.de>
+
+commit ae5f943ba8ede448a4b1a145fd8911856701ecc5
+Author: Dave Liu <daveliu@freescale.com>
+Date:	Thu Oct 23 21:18:53 2008 +0800
+
+    85xx: Fix the incorrect register used for DDR erratum1
+
+    The 8572 DDR erratum1:
+    DDR controller may enter an illegal state when operating
+    in 32-bit bus mode with 4-beat bursts.
+
+    Description:
+    When operating with a 32-bit bus, it is recommended that
+    DDR_SDRAM_CFG[8_BE] is cleared when DDR2 memories are used.
+    This forces the DDR controller to use 4-beat bursts when
+    communicating to the DRAMs. However, an issue exists that
+    could lead to data corruption when the DDR controller is
+    in 32-bit bus mode while using 4-beat bursts.
+
+    Projected Impact:
+    If the DDR controller is operating in 32-bit bus mode with
+    4-beat bursts, then the controller may enter into a bad state.
+    All subsequent reads from memory is corrupted.
+    Four-beat bursts with a 32-bit bus only is used with DDR2 memories.
+    Therefore, this erratum does not affect DDR3 mode.
+
+    Work Arounds:
+    To work around this issue, software must set DEBUG_1[31] in
+    DDR memory mapped space (CCSRBAR offset + 0x2f00 for DDR_1
+    and CCSRBAR offset + 0x6f00 for DDR_2).
+
+    Currenlty, the code is using incorrect register DDR_SDRAM_CFG_2
+    as condition, but it should be DDR_SDRAM_CFG register.
+
+    Signed-off-by: Dave Liu <daveliu@freescale.com>
+
+commit d5b693090ed08d24c18491df9d8fc7387b2906f3
+Author: Dave Liu <daveliu@freescale.com>
+Date:	Thu Oct 23 21:17:19 2008 +0800
+
+    85xx: remove unused config definition
+
+    Signed-off-by: Dave Liu <daveliu@freescale.com>
+
+commit 0f060c3bf82832331a509f2e5d2442539e7aad09
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date:	Thu Oct 23 01:47:38 2008 -0500
+
+    85xx: Add basic e500mc core support
+
+    Introduce CONFIG_E500MC to deal with the minor differences between
+    e500v2 and e500mc.
+
+    * Certain fields of HID0/1 don't exist anymore on e500mc
+    * Cache line size is 64-bytes on e500mc
+    * reset value of PIR is different
+
+    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit a38a5b6edd30f29fd5fdb1d7f674521906c0e677
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date:	Thu Oct 23 01:47:37 2008 -0500
+
+    85xx: Use CONFIG_SYS_CACHELINE_SIZE instead of magic number
+
+    Using CONFIG_SYS_CACHELINE_SIZE instead of 31 means we can handle
+    e500mc's 64-byte cacheline properly when it gets added.
+
+    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 5deb8022c3749faac30e9ad9694691e2442b5c93
+Author: Georg Schardt <schardt@team-ctech.de>
+Date:	Fri Oct 24 13:51:52 2008 +0200
+
+    ppc4xx: New board avnet fx12 minimodul
+
+    This patch adds support for the avnet fx12 minimodul.
+    It needs the "ppc4xx: Generic architecture for xilinx ppc405"
+    patch from Ricardo.
+
+    Signed-off-by: Georg Schardt <schardt@team-ctech.de>
+    Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
+    Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 1f4d53260ec6f8f122aed75cce7c757d97a551e0
+Author: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
+Date:	Tue Oct 21 18:29:46 2008 +0200
+
+    ppc4xx: Generic architecture for xilinx ppc405(v3)
+
+    As "ppc44x: Unification of virtex5 pp440 boards" did for the xilinx
+    ppc440 boards, this patch presents a common architecture for all the
+    xilinx ppc405 boards.
+
+    Any custom xilinx ppc405 board can be added very easily with no code
+    duplicity.
+
+    This patch also adds a simple generic board, that can be used on almost
+    any design with xilinx ppc405 replacing the file ppc405-generic/xparameters.h
+
+    This patch is prepared to work with the latest version of EDK (10.1)
+
+    Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
+    Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 485c00a57fab86f72a3769480c66bf1ca22e1459
+Author: Stefan Roese <sr@denx.de>
+Date:	Fri Oct 24 08:56:09 2008 +0200
+
+    ppc4xx: Disable DDR2 autocalibration on Kilauea for now
+
+    Since the new autocalibration still has some problems on some Kilauea
+    boards with 200MHz DDR2 frequency we disable the autocalibration and
+    use the hardcoded values as done before. This seems to work reliably
+    on all known DDR2 frequencies.
+
+    After the autocalibration issue is fixed we will enable it again.
+
+    Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit f177f4250c729727b1629fa8d8d6556c999e9b8c
+Author: Mike Frysinger <vapier@gentoo.org>
+Date:	Wed Apr 9 02:02:07 2008 -0400
+
+    Blackfin: fix up UART status bit handling
+
+    Some Blackfin UARTs are read-to-clear while others are write-to-clear.
+    This can cause problems when we poll the LSR and then later try and handle
+    any errors detected.
+
+    Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit ae0910298f31f5bb3d33a64b8467c60ea3c5d6d0
+Author: Mike Frysinger <vapier@gentoo.org>
+Date:	Sat Oct 11 20:42:17 2008 -0400
+
+    Blackfin: bf561-ezkit: drop redundant code
+
+    Common Blackfin code already announces CPU information.
+
+    Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit e2eea98bff1369f77a9f59a5fd0bd4928bc3332e
+Author: Mike Frysinger <vapier@gentoo.org>
+Date:	Sat Oct 11 20:43:10 2008 -0400
+
+    Blackfin: bf561-ezkit: drop pointless USB code
+
+    The USB/LAN register settings are not actually used/needed in order to
+    drive things from U-Boot, so drop the code.
+
+    Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit c23bff63fb03cb9dbcd26522841e53f9b34fa1ab
+Author: Mike Frysinger <vapier@gentoo.org>
+Date:	Sat Oct 11 20:47:58 2008 -0400
+
+    Blackfin: linker scripts: force start.o and set initcode boundaries
+
+    Make sure that the start.o object is always the first object in our linker
+    script regardless of configuration settings, and add some linker symbols
+    so the ldr utility can properly locate the initcode when generating a LDR.
+
+    Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit bd33e5c613cf70e3cb51a73fdd653fe83b942bb0
+Author: Mike Frysinger <vapier@gentoo.org>
+Date:	Sat Oct 11 21:19:39 2008 -0400
+
+    Blackfin: small cpu init optimization while setting interrupt mask
+
+    Use the sti instruction to set the initial interrupt mask rather than
+    banging on the core IMASK MMR to save both space and time.
+
+    Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 960922291c9594acb575cec7e47d7bed9b58182c
+Author: Mike Frysinger <vapier@gentoo.org>
+Date:	Sat Oct 11 21:18:10 2008 -0400
+
+    Blackfin: set initial stack correctly according to Blackfin ABI
+
+    Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 25cd33d82ea521b7bd90ca858f8919fae1e9732b
+Author: Mike Frysinger <vapier@gentoo.org>
+Date:	Sun Apr 20 03:11:53 2008 -0400
+
+    Blackfin: make baud calculation more accurate
+
+    We should use the algorithm in the Linux kernel so that the UART divisor
+    calculation is more accurate.  It also fixes problems on some picky UARTs
+    that have sampling anomalies.
+
+    Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 0ba1da116e5edcb0c5ae4a7585d73f6548400a06
+Author: Mike Frysinger <vapier@gentoo.org>
+Date:	Mon Oct 6 04:21:41 2008 -0400
+
+    Blackfin: decode hwerrcause/excause when crashing
+
+    Having to decode hwerrcause/excause values is a pain, so automate it.
+
+    Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 2de95bb20c488f20298df6881b700a5a757ee780
+Author: Mike Frysinger <vapier@gentoo.org>
+Date:	Mon Oct 6 04:20:54 2008 -0400
+
+    Blackfin: fix register dump messages
+
+    Make sure we report RETI/IPEND correctly.
+
+    Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 7133999e6f62a9a01f6a8ffe234b8532b3ad1e4b
+Author: Mike Frysinger <vapier@gentoo.org>
+Date:	Mon Oct 6 04:19:34 2008 -0400
+
+    Blackfin: don't bother displaying reboot msg when crashing
+
+    The hang function already tells you to reboot, so no point in showing it
+    twice.
+
+    Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 70c4c032ea112cc42aa1ce959c33fc4825eaef95
+Author: Mike Frysinger <vapier@gentoo.org>
+Date:	Sun Jun 1 01:23:48 2008 -0400
+
+    Blackfin: enable support for nested interrupts
+
+    During cpu init, make sure we initialize the CEC properly so that
+    interrupts can fire and be handled while U-Boot is running.
+
+    Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 39782727e185860faa4884c2b04e84cb33d1c6cf
+Author: Mike Frysinger <vapier@gentoo.org>
+Date:	Mon Oct 6 03:55:25 2008 -0400
+
+    Blackfin: init NAND before relocating env
+
+    If booting out of NAND, we need to make sure we initialize it properly
+    before attempting to relocate the environment.
+
+    Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 0f9a8819416ba40a53de50af148847a0e508f84d
+Author: Mike Frysinger <vapier@gentoo.org>
+Date:	Thu Aug 7 18:40:13 2008 -0400
+
+    Blackfin: check cache bits, not cplb bits
+
+    Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 2c1ea9e370cb72dd6a5aa32338e87a8a1f77bd76
+Author: Mike Frysinger <vapier@gentoo.org>
+Date:	Thu Aug 7 17:52:59 2008 -0400
+
+    Blackfin: drop unused cache flush code
+
+    Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 50f0d211912a648e31aa9123b4665a0444bb8ca9
+Author: Mike Frysinger <vapier@gentoo.org>
+Date:	Thu Aug 7 15:21:47 2008 -0400
+
+    Blackfin: unify cache handling code
+
+    Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 3c8798983403cb68a827d7a0d09b1134524a1b7d
+Author: Mike Frysinger <vapier@gentoo.org>
+Date:	Mon Oct 6 03:39:07 2008 -0400
+
+    Blackfin: only initialize the RTC when actually used
+
+    Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 621e579b812dd1a2e6777f7cbf6e55e736505823
+Author: Mike Frysinger <vapier@gentoo.org>
+Date:	Mon Oct 6 03:44:33 2008 -0400
+
+    Blackfin: fix SWRST register definition
+
+    The SWRST register is a 16bit, not 32bit, register.
+
+    Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 06121c4e2d183887dcd7a4ca2dcd395b213ea15b
+Author: Mike Frysinger <vapier@gentoo.org>
+Date:	Thu Aug 7 18:54:57 2008 -0400
+
+    Blackfin: build with -fomit-frame-pointer
+
+    Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit adbfeeb7b32f737a9738daa583350d2bb9ed017a
+Author: Mike Frysinger <vapier@gentoo.org>
+Date:	Thu Aug 7 17:50:26 2008 -0400
+
+    Blackfin: document some of the blackfin directories
+
+    Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit e4337968e43698a68ba608369f46d4a4114111ca
+Author: Mike Frysinger <vapier@gentoo.org>
+Date:	Thu Aug 7 15:16:56 2008 -0400
+
+    Blackfin: only enable hardware error irq by default
+
+    Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 2b66f08f257ef6a06785f27b3c6dc2a4cfc9cac4
+Author: Mike Frysinger <vapier@gentoo.org>
+Date:	Thu Aug 7 13:36:43 2008 -0400
+
+    Blackfin: punt old unused mem_init.h header
+
+    Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit bcc121a01608042066a19ab5bff5bcfb805bf406
+Author: Mike Frysinger <vapier@gentoo.org>
+Date:	Thu Aug 7 13:18:55 2008 -0400
+
+    Blackfin: delete unused page_descriptor_table_size define
+
+    Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 30fb9d24ae16e5b0ed39e5b7cc85981165ca98bc
+Author: Mike Frysinger <vapier@gentoo.org>
+Date:	Thu Aug 7 13:17:03 2008 -0400
+
+    Blackfin: fix typo in boot mode comment and add NAND define
+
+    Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 2e5cbe5461c5c4c6665e318cfe950a5a150d999c
+Author: Ben Maan <moo@cow>
+Date:	Thu Aug 7 13:14:21 2008 -0400
+
+    Blackfin: fix port mux defines for BF54x
+
+    Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 0656ef2ba274910d31364fe022f6c7db0051660d
+Author: Mike Frysinger <vapier@gentoo.org>
+Date:	Thu Aug 7 13:09:50 2008 -0400
+
+    Blackfin: update anomaly lists
+
+    Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 50ca95402876cf7bac4e2d4f7855f616a038763f
+Author: Mike Frysinger <vapier@gentoo.org>
+Date:	Thu Aug 7 13:08:54 2008 -0400
+
+    Blackfin: unify DSPID/DBGSTAT MMR definitions
+
+    Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit d9d8c7c696dec370ca714c03beb6e79d4c90bd5e
+Author: Wolfgang Denk <wd@denx.de>
+Date:	Tue Oct 21 15:53:51 2008 +0200
+
+    Fix strmhz(): avoid printing negative fractions
+
+    Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 4a7f6b750d8de543fdf8e58acd86745010054571
+Author: Richard Retanubun <RichardRetanubun@ruggedcom.com>
+Date:	Fri Oct 17 08:55:51 2008 -0400
+
+    mpc83xx: Removed #ifdef CONFIG_MPC834X dependency on upmconfig function
+
+    This is done to allow other 83XX based platforms which also have UPM
+    (e.g. 8360) to configure and use their UPM in u-boot.
+
+    Signed-off-by: Richard Retanubun <RichardRetanubun@RuggedCom.com>
+    Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 3bf1be3c0cfb1129b68cc1474119e5f323536488
+Author: Anton Vorontsov <avorontsov@ru.mvista.com>
+Date:	Tue Oct 14 22:58:53 2008 +0400
+
+    mpc83xx: add support for switching between USB Host/Function for MPC837XEMDS
+
+    With this patch u-boot can fixup the dr_mode and phy_type properties
+    for the Dual-Role USB controller.
+
+    While at it, also remove #ifdefs around includes, they are not needed.
+
+    Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
+    Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit b3379f3fd13969934c00097c05754e7a8990fd39
+Author: Anton Vorontsov <avorontsov@ru.mvista.com>
+Date:	Wed Oct 8 20:52:54 2008 +0400
+
+    mpc83xx: add ELBC NAND support for the MPC837XEMDS boards
+
+    Though NAND chip is replaceable on the MPC837XE-MDS boards, the
+    current settings don't work with the default chip on the board.
+    Nevertheless Freescale's U-Boot sets the option register correctly,
+    so I just dumped the register from the working u-boot. My guess is
+    that the old settings were applicable for some pilot boards, not
+    found in the production.
+
+    This patch also enables FSL ELBC driver so that we could access
+    the NAND storage in the u-boot.
+
+    The NAND support costs about 45KB, so the u-boot no longer fits
+    into two 128KB NOR flash sectors, thus we also have to adjust
+    environment location: add another 128KB to the monitor length.
+
+    Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
+
+    It is due to hardware design and logic defect, that is the
+    I/O[0:7] of NAND chip is connected to LAD[7:0], so when
+    the NAND chip connected to nLCS3,  you have to set up the
+    OR3[BCTLD] = '1' for normal operation, otherwise it will have
+    bus contention due to the pin 48/25 of U60 is enabled.
+
+    Setup the OR3[BCTLD] = '1' , that meaning the LBCTL is not
+    asserted upon access to the NAND chip, keep the default state.
+
+    Acked-by: Dave Liu <daveliu@freescale.com>
+    Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 00f7bbae92e3b13f2b37aeb1def9bb12445521b7
+Author: Anton Vorontsov <avorontsov@ru.mvista.com>
+Date:	Thu Oct 2 19:17:33 2008 +0400
+
+    mpc83xx: fix PCI scan hang on the standalone MPC837xE-MDS boards
+
+    The MPC837xE-MDS board's CPLD can auto-detect if the board is on the PIB,
+    standalone or acting as a PCI agent. User's Guide says:
+
+    - When the CPLD recognizes its location on the PIB it automatically
+      configures RCW to the PCI Host.
+    - If the CPLD fails to recognize its location then it is automatically
+      configured as an Agent and the PCI is configured to an external arbiter.
+
+    This sounds good. Though in the standalone setup the CPLD sets PCI_HOST
+    flag (it's ok, we can't act as PCI agents since we receive CLKIN, not
+    PCICLK), but the CPLD doesn't set the ARBITER_ENABLE flag, and without
+    any arbiter bad things will happen (here the board hangs during any config
+    space reads).
+
+    In this situation we must disable the PCI. And in case of anybody really
+    want to use an external arbiter, we provide "pci_external_aribter"
+    environment variable.
+
+    Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
+    Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 1da83a63d8e1b4bddeb82581b1745a09aac3e2d3
+Author: Anton Vorontsov <avorontsov@ru.mvista.com>
+Date:	Thu Oct 2 18:32:25 2008 +0400
+
+    mpc83xx: add SGMII riser module support for the MPC8378E-MDS boards
+
+    This involves configuring the SerDes and fixing up the flags and
+    PHY addresses for the TSECs.
+
+    For Linux we also fix up the device tree.
+
+    Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
+    Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit e6d9c8916de9c24f2c52d0b01cf00d2e74a04cd8
+Author: Anton Vorontsov <avorontsov@ru.mvista.com>
+Date:	Thu Oct 2 18:31:59 2008 +0400
+
+    mpc83xx: add TSECs' HRCWH masks for MPC837x processors
+
+    We'll use these masks to parse TSEC modes out of HRCWH.
+
+    Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
+    Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 6f9cc6608b4e1cefde56c0fb99ae1c95c42575ff
+Author: Anton Vorontsov <avorontsov@ru.mvista.com>
+Date:	Thu Oct 2 18:31:56 2008 +0400
+
+    mpc83xx: serdes: add forgotten shifts for rfcks
+
+    The rfcks should be shifted by 28 bits left. We didn't notice the bug
+    because we were using only 100MHz clocks (for which rfcks == 0).
+
+    Though, for SGMII we'll need 125MHz clocks.
+
+    Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
+    Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 55c531984dcf933e4cd13a187a7e08e873b7ced1
+Author: Anton Vorontsov <avorontsov@ru.mvista.com>
+Date:	Thu Oct 2 18:31:53 2008 +0400
+
+    mpc83xx: fix serdes setup for the MPC8378E boards
+
+    MPC837xE specs says that SerDes1 has:
+
+    — Two lanes running x1 SGMII at 1.25 Gbps;
+    — Two lanes running x1 SATA at 1.5 or 3.0 Gbps.
+
+    And for SerDes2:
+
+    — Two lanes running x1 PCI Express at 2.5 Gbps;
+    — One lane running x2 PCI Express at 2.5 Gbps;
+    — Two lanes running x1 SATA at 1.5 or 3.0 Gbps.
+
+    The spec also explicitly states that PEX options are not valid for
+    the SD1.
+
+    Nevertheless MPC8378 RDB and MDS boards configure the SD1 for PEX,
+    which is wrong to do.
+
+    Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
+    Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 5c2ff323a94e27e481f70c44838d43fcd844dd46
+Author: Anton Vorontsov <avorontsov@ru.mvista.com>
+Date:	Wed Sep 10 18:12:37 2008 +0400
+
+    mpc83xx: mpc8360emds: rework LBC SDRAM setup
+
+    Currently 64M of LBC SDRAM are mapped at 0xF0000000 which makes
+    it difficult to use (b/c then the memory is discontinuous and
+    there is quite big memory hole between the DDR/SDRAM regions).
+
+    This patch reworks LBC SDRAM setup so that now we dynamically
+    place the LBC SDRAM near the DDR (or at 0x0 if there isn't any
+    DDR memory).
+
+    With this patch we're able to:
+
+    - Boot without external DDR memory;
+    - Use most "DDR + SDRAM" setups without need to support for
+      sparse/discontinuous memory model in the software.
+
+    Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
+    Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit def0819e920b05b34b56d8b42e1e43d9b89a52d6
+Author: Wolfgang Denk <wd@xpert.denx.de>
+Date:	Tue Oct 21 11:23:56 2008 +0200
+
+    FDT: don't use private kernel header files
+
+    On some systems (for example Fedora Core 4) U-Boot builds with the
+    following wanrings only:
+
+    ...
+    In file included from /home/wd/git/u-boot/include/libfdt_env.h:33,
+		     from fdt.c:51:
+		 /usr/include/asm/byteorder.h:6:2: warning: #warning using private kernel header; include <endian.h> instead!
+
+    This patch fixes this problem.
+
+    Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit f4d14c55504ce40287321bd63ee269e3233ee4ae
+Author: Stefan Roese <sr@denx.de>
+Date:	Mon Oct 13 15:15:31 2008 +0200
+
+    ppc4xx: Add 1.0 & 1.066 GHz to canyonlands bootstrap command for PLL setup
+
+    Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 43cbce69d48d052574d71f50724be546d90a46a4
+Author: Stefan Roese <sr@denx.de>
+Date:	Mon Oct 13 10:45:14 2008 +0200
+
+    ppc4xx: Correctly setup ranges property in ebc node
+
+    Previously only the NOR flash mapping was written into the ranges
+    property of the ebc node. This patch now writes all enabled chip
+    select areas into the ranges property.
+
+    Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit d7b26d58328f137471ea97de382bfa63f7239931
+Author: Dirk Eibach <eibach@gdsys.de>
+Date:	Wed Oct 8 15:37:50 2008 +0200
+
+    ppc4xx: Add GDSys neo 405EP board support
+
+    Signed-off-by: Dirk Eibach <eibach@gdsys.de>
+    Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit c11da194545d2f4bbb54be1bb5e504e20ce8c16c
+Author: Niklaus Giger <niklaus.giger@netstal.com>
+Date:	Wed Oct 1 14:46:13 2008 +0200
+
+    ppc4xx: Update configs for Netstal boards
+
+    I reorganized my config files, putting the common stuff into netstal-common.h
+    (got the idea by looking a amcc-common.h from Stefan).
+
+    Added stuff to boot the new powerpc linux via NFS (only tested with HCU4).
+
+    Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
+    Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit c9c11d751e4242cf29c3c3c290d971f6d0cb1d15
+Author: Adam Graham <agraham@amcc.com>
+Date:	Wed Oct 8 10:13:19 2008 -0700
+
+    ppc4xx: Add routine to retrieve CPU number
+
+    Provide a weak defined routine to retrieve the CPU number for
+    reference boards that have multiple CPU's.	Default behavior
+    is the existing single CPU print output.  Reference boards with
+    multiple CPU's need to provide a board specific routine.
+    See board/amcc/arches/arches.c for an example.
+
+    Signed-off-by: Adam Graham <agraham@amcc.com>
+    Signed-off-by: Victor Gallardo <vgallardo@amcc.com>
+    Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 59217bae40e90982ab5400d849c08af683ace036
+Author: Adam Graham <agraham@amcc.com>
+Date:	Wed Oct 8 10:13:14 2008 -0700
+
+    ppc4xx: Add static support for 44x IBM SDRAM Controller
+
+    This patch add the capability to configure a PPC440 based IBM SDRAM
+    Controller with static, compiled-in, values. PPC440 memory subsystem
+    includes a Memory Queue core.
+
+    Signed-off-by: Adam Graham <agraham@amcc.com>
+    Signed-off-by: Victor Gallardo <vgallardo@amcc.com>
+    Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit f09f09d3899017aaaa2b031bba63c271e9c48e4d
+Author: Adam Graham <agraham@amcc.com>
+Date:	Wed Oct 8 10:12:53 2008 -0700
+
+    ppc4xx: Add AMCC Arches board support (dual 460GT)
+
+    The Arches Evaluation board is based on the AMCC 460GT SoC chip.
+    This board is a dual processor board with each processor providing
+    independent resources for Rapid IO, Gigabit Ethernet, and serial
+    communications. Each 460GT has it's own 512MB DDR2 memory, 32MB NOR
+    FLASH, UART, EEPROM and temperature sensor, along with a shared debug
+    port. The two 460GT's will communicate with each other via shared
+    memory, Gigabit Ethernet and x1 PCI-Express.
+
+    Signed-off-by: Adam Graham <agraham@amcc.com>
+    Signed-off-by: Victor Gallardo <vgallardo@amcc.com>
+    Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 055b12f2ffd7c34eea7e983a0588b24f2e69e0e3
+Author: Wolfgang Denk <wd@xpert.denx.de>
+Date:	Sun Oct 19 21:54:30 2008 +0200
+
+    TQM8260: environment in flash instead EEPROM, baudrate 115k
+
+    Several customers have reported problems with the environment in
+    EEPROM, including corrupted content after board reset. Probably the
+    code to prevent I2C Enge Conditions is not working sufficiently.
+
+    We move the environment to flash now, which allows to have a backup
+    copy plus gives much faster boot times.
+
+    Also, change the default console initialization to 115200 bps as used
+    on most other boards.
+
+    Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 1836881190b3d8a6918b0d64b39fe32bbbdf85d8
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date:	Sun Oct 19 12:49:19 2008 -0500
+
+    85xx: Fix compile warning in mpc8536ds.c
+
+    mpc8536ds.c: In function 'is_sata_supported':
+    mpc8536ds.c:615: warning: unused variable 'devdisr'
+
+    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 8ed44d91c8122d00368523b0b746691c895d3b3c
+Author: Wolfgang Denk <wd@denx.de>
+Date:	Sun Oct 19 02:35:50 2008 +0200
+
+    Cleanup: fix "MHz" spelling
+
+    Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 08ef89ecd174969b3544f3f0c7cd1de3c57f737b
+Author: Wolfgang Denk <wd@denx.de>
+Date:	Sun Oct 19 02:35:49 2008 +0200
+
+    Use strmhz() to format clock frequencies
+
+    Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit d50c7d4be150b2252c0d2e16cfcf69643bdd6dc9
+Author: Wolfgang Denk <wd@denx.de>
+Date:	Sun Oct 19 02:35:48 2008 +0200
+
+    strmhz(): Round numbers when printing clock frequencies
+
+    Round clock frequencies for printing.
+
+    Many boards printed off clock frequencies like 399 MHz instead of the
+    exact 400 MHz because numberes were not rounded. This is fixed now.
+
+    Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 681c02d05b29c6d46093525052c74b9c4ddc8b08
+Author: Timur Tabi <timur@freescale.com>
+Date:	Mon Oct 20 15:16:47 2008 -0500
+
+    85xx: properly document MPC85xx_PORDEVSR2_SEC_CFG
+
+    Commit f7d190b1 corrected the value of MPC85xx_PORDEVSR2_SEC_CFG, but forgot
+    to add a comment that the correct value disagrees with the 8544 reference
+    manual.  The changelog for that commit is also wrong, as it says "bit 28"
+    when it should be "bit 24".
+
+    Signed-off-by: Timur Tabi <timur@freescale.com>
+
+commit 360fe71e82b83e264c964c9447c537e9a1f643c8
+Author: Heiko Schocher <hs@denx.de>
+Date:	Fri Oct 17 18:24:06 2008 +0200
+
+    mgcoge: add redundant environment sector
+
+    Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit 53ebf0c470c87d5f9fa76462e5f4064d26a9b16a
+Author: Heiko Schocher <hs@denx.de>
+Date:	Fri Oct 17 18:23:27 2008 +0200
+
+    mgsuvd: update size of environment
+
+    Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit 2e26d837f11460c0e6dede7d65424a31e0183d09
+Author: Jason Jin <Jason.jin@freescale.com>
+Date:	Fri Oct 10 11:41:00 2008 +0800
+
+    Enabled the Freescale SGMII riser card on 8536DS
+
+    Signed-off-by: Jason Jin <Jason.jin@freescale.com>
+
+commit 7e183cad0c5ab6415dca95d6ac290ea918b28c55
+Author: Liu Yu <yu.liu@freescale.com>
+Date:	Fri Oct 10 11:40:59 2008 +0800
+
+    Enabled the Freescale SGMII riser card on 8572DS
+
+    This patch based on Andy's work.
+    Including command 'pixis_set_sgmii' support.
+
+    Signed-off-by: Liu Yu <yu.liu@freescale.com>
+
+commit bff188baf9427c35745356439435acf3864d4c65
+Author: Liu Yu <yu.liu@freescale.com>
+Date:	Fri Oct 10 11:40:58 2008 +0800
+
+    Make pixis_set_sgmii more general to support MPC85xx boards.
+
+    The pixis sgmii command depend on the FPGA support on the board, some 85xx
+    boards support SGMII riser card but did not support this command, define
+    CONFIG_PIXIS_SGMII_CMD for those boards which support the sgmii command.
+
+    Not like 8544, 8572 has 4 eTsec so that the other two's pixis bits
+    are not supported by 8544. Therefor, define PIXIS_VSPEED2_MASK and
+    PIXIS_VCFGEN1_MASK in header file for both boards.
+
+    Signed-off-by: Liu Yu <yu.liu@freescale.com>
+
+commit 5e981d683d2363204c76773941c2e9c2044c808f
+Author: Ed Swarthout <Ed.Swarthout@freescale.com>
+Date:	Wed Oct 8 23:38:02 2008 -0500
+
+    Add cpu/8xxx to TAGS_SUBDIRS
+
+    Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
+
+commit e1f7d22b8b52fc08c4d17a6a7db1e664281aed63
+Author: Ed Swarthout <Ed.Swarthout@freescale.com>
+Date:	Thu Oct 9 01:25:55 2008 -0500
+
+    fsl_law clear enable before changing.
+
+    Debug sessions may have left enabled laws.
+    Changing lawbar with an unkown enabled tgtid could cause problems.
+
+    Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
+
+commit 86be510f7b5443e7e937f696bfbe037fdc740b15
+Author: Ed Swarthout <Ed.Swarthout@freescale.com>
+Date:	Thu Oct 9 00:29:27 2008 -0500
+
+    mpc8572 additional end-point mode
+
+    mpc8572 supports all pcie controllers as end-points with cfg_host_agent=0.
+    Include host_agent == 0 decode for end-point determination.
+
+    This is not needed for the ds reference board since pcie3 will be a host
+    in order to connect to the uli chip.  Include it here as a reference for
+    other mpc8572 boards.
+
+    Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
+
+commit 6856b3d0221a838580e6bb06f61425fd7529ba93
+Author: Ed Swarthout <Ed.Swarthout@freescale.com>
+Date:	Wed Oct 8 23:37:59 2008 -0500
+
+    85xx if NUM_CPUS>1, print cpu number
+
+    Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
+
+commit f7fecc3e25050a036c9f50f0d2b85bc3199a96e0
+Author: Ed Swarthout <Ed.Swarthout@freescale.com>
+Date:	Wed Oct 8 23:38:01 2008 -0500
+
+    pixis do not print long help if not configured
+
+    Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
+
+commit 0e17f02a8a78d85225a4d805f6a1ea95a0a460b5
+Author: Andy Fleming <afleming@freescale.com>
+Date:	Tue Oct 7 08:09:50 2008 -0500
+
+    Have u-boot pass stashing parameters into device tree
+
+    Some cores don't support ethernet stashing at all, and some
+    instances have errata.  Adds 3 properties to gianfar nodes
+    which support stashing.  For now, just add this support to
+    85xx SoCs.
+
+    Signed-off-by: Andy Fleming <afleming@freescale.com>
+
+commit c21617fd265b7c126c6e2f2d8a23cdb00d4fade7
+Author: Haiying Wang <Haiying.Wang@freescale.com>
+Date:	Fri Oct 3 12:37:57 2008 -0400
+
+    Add DDR options setting on MPC8641HPCN board
+
+    * Add board specific parameter table to choose correct cpo, clk_adjust,
+    write_data_delay based on board ddr frequency and n_ranks.
+
+    * Set odt_rd_cfg and odt_wr_cfg based on the dimm# and CS#.
+
+    Signed-off-by: James Yang <James.Yang@freescale.com>
+    Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
+
+commit 4ca06607d60d0a6378812ef58fd1eab2a7f77111
+Author: Haiying Wang <Haiying.Wang@freescale.com>
+Date:	Fri Oct 3 12:37:41 2008 -0400
+
+    Add ddr interleaving suppport for MPC8572DS board
+
+    * Add board specific parameter table to choose correct cpo, clk_adjust,
+    write_data_delay, 2T based on board ddr frequency and n_ranks.
+
+    * Set odt_rd_cfg and odt_wr_cfg based on the dimm# and CS#.
+
+    * Set memory controller interleaving mode to bank interleaving, and disable
+    bank(chip select) interleaving mode by default, because the default on-board
+    DDR DIMMs are 2x512MB single-rank.
+
+    * Change CONFIG_ICS307_REFCLK_HZ from 33333333 to 33333000.
+
+    Signed-off-by: James Yang <James.Yang@freescale.com>
+    Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
+
+commit 1f293b417ac6ab8e317ca2b770377ca93edf2370
+Author: Haiying Wang <Haiying.Wang@freescale.com>
+Date:	Fri Oct 3 12:37:26 2008 -0400
+
+    Add debug information for DDR controller registers
+
+    Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
+
+commit c9ffd839b1ada502c86f88edaf1534426b6688ce
+Author: Haiying Wang <Haiying.Wang@freescale.com>
+Date:	Fri Oct 3 12:37:10 2008 -0400
+
+    Check DDR interleaving mode
+
+    * Check DDR interleaving mode from environment by reading memctl_intlv_ctl and
+    ba_intlv_ctl.
+    * Print DDR interleaving mode information
+    * Add doc/README.fsl-ddr to describe the interleaving setting
+
+    Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
+
+commit dfb49108e4f86c2224e1f30124328b0de66ef72e
+Author: Haiying Wang <Haiying.Wang@freescale.com>
+Date:	Fri Oct 3 12:36:55 2008 -0400
+
+    Pass dimm parameters to populate populate controller options
+
+    Because some dimm parameters like n_ranks needs to be used with the board
+    frequency to choose the board parameters like clk_adjust etc. in the
+    board_specific_paramesters table of the board ddr file, we need to pass
+    the dimm parameters to the board file.
+
+    * move ddr dimm parameters header file from /cpu to /include directory.
+    * add ddr dimm parameters to populate board specific options.
+    * Fix fsl_ddr_board_options() for all the 8xxx boards which call this function.
+
+    Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
+
+commit dbbbb3abeff325855cae76e33d69d5665631443f
+Author: Haiying Wang <Haiying.Wang@freescale.com>
+Date:	Fri Oct 3 12:36:39 2008 -0400
+
+    Make DDR interleaving mode work correctly
+
+    Fix some bugs:
+      1. Correctly set intlv_ctl in cs_config.
+      2. Correctly set sa, ea in cs_bnds when bank interleaving mode is enabled.
+      3. Set base_address and total memory for each ddr controller in memory
+	 controller interleaving mode.
+
+    Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
+
+commit 1c9aa76bf9013069e24258f46f4687c9f98a02d6
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date:	Mon Sep 22 23:40:42 2008 -0500
+
+    85xx: Enable interrupt and setexpr commands on Freescale 85xx boards
+
+    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 7c0d4a7508d252d2d7c137eeb376814132dda30f
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date:	Mon Sep 22 14:11:11 2008 -0500
+
+    85xx: Improve flash remapping on MPC8572DS & MPC8536DS
+
+    Changing the flash from cacheable to cache-inhibited was taking a significant
+    amount of time due to the fact that we were iterating over the full 256M of
+    flash.  Instead we can just flush the L1 d-cache and invalidate the i-cache.
+
+    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 54e091d3b603a3332c619199ca83a07e95960da4
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date:	Mon Sep 22 14:11:10 2008 -0500
+
+    85xx: Export invalidate_{i,d}cache and add flush_dcache
+
+    Added the ability for C code to invalidate the i/d-cache's and
+    to flush the d-cache.  This allows us to more efficient change mappings
+    from cache-able to cache-inhibited.
+
+    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 6250f0f6297c5ba9aecdea6290799a95c5d4b1da
+Author: Heiko Schocher <hs@denx.de>
+Date:	Fri Oct 17 16:11:52 2008 +0200
+
+    mgcoge, mgsuvd: extract more common code
+
+    in ft_blob_update () for both boards was an unneccessary
+    repetition of code, which this patch moves in a common
+    function for this boards.
+
+    Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit 9e299192ca9850cf725456388042a5aa5a6f3ec7
+Author: Heiko Schocher <hs@denx.de>
+Date:	Fri Oct 17 12:15:55 2008 +0200
+
+    mgcoge, mgsuvd: use in_*/out_* accesors
+
+    Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit a21ca95f8b9dca22714952b348e4905ac157b5cd
+Author: Heiko Schocher <hs@denx.de>
+Date:	Fri Oct 17 13:52:51 2008 +0200
+
+    mgsuvd: fix compiler warning when using soft_i2c driver
+
+    Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit cac9cf7875c2a01d63422820ed4732a9bdf5ab7b
+Author: Heiko Schocher <hs@denx.de>
+Date:	Fri Oct 17 12:15:05 2008 +0200
+
+    mgsuvd: fix coding style
+
+    Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit 5f4c3137f4f051787707c548133823f1656eb508
+Author: Heiko Schocher <hs@denx.de>
+Date:	Fri Oct 17 12:13:30 2008 +0200
+
+    mgcoge: Second Flash on CS5 not on CS1
+
+    Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit 76da19df5b8e186d269f29190696bd31fb6c836b
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date:	Thu Oct 16 21:52:08 2008 -0500
+
+    Added arch_lmb_reserve to allow arch specific memory regions protection
+
+    Each architecture has different ways of determine what regions of memory
+    might not be valid to get overwritten when we boot.  This provides a
+    hook to allow them to reserve any regions they care about.	Currently
+    only ppc, m68k and sparc need/use this.
+
+    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit e02d4a9904c8f36395994c0c81469d552b82f5ea
+Author: Heiko Schocher <hs@denx.de>
+Date:	Thu Oct 16 16:32:35 2008 +0200
+
+    mgcoge: added CONFIG_FIT to support the new u-boot image format
+
+    Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit 6d0f6bcf337c5261c08fabe12982178c2c489d76
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date:	Thu Oct 16 15:01:15 2008 +0200
+
+    rename CFG_ macros to CONFIG_SYS
+
+    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 71edc271816ec82cf0550dd6980be2da3cc2ad9e
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date:	Mon Oct 13 14:12:55 2008 -0500
+
+    74xx/7xx/86xx: Rename flush_data_cache to flush_dcache to match 85xx version
+
+    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit b799cb4c0eebb0762e91e9653d8b9cc9a98440e3
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date:	Tue Sep 23 10:05:02 2008 -0500
+
+    Expose command table search for sub-commands
+
+    Sub-command can benefit from using the same table and search functions
+    that top level commands have.  Expose this functionality by refactoring
+    find_cmd() and introducing find_cmd_tbl() that sub-command processing
+    can call.
+
+    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit f7e51b27508446f8cae3927975817137979ad5e8
+Author: Heiko Schocher <hs@denx.de>
+Date:	Wed Oct 15 09:41:33 2008 +0200
+
+    mgsuvd, mgcoge: added BOOTCOUNT feature.
+
+    Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit 8f64da7f83b553889bc08400c97047998382e9d2
+Author: Heiko Schocher <hs@denx.de>
+Date:	Wed Oct 15 09:41:00 2008 +0200
+
+    mgcoge, mgsuvd: added support for the IVM EEprom.
+
+    The EEprom contains some Manufacturerinformation,
+    which are read from u-boot at boot time, and saved
+    in same hush shell variables.
+
+    Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit 81473f67810c4c9b7efaed8dee258ed6bc4c7983
+Author: Heiko Schocher <hs@denx.de>
+Date:	Wed Oct 15 09:40:28 2008 +0200
+
+    hush: add showvar command for hush shell.
+
+    This new command shows the local variables defined in
+    the hush shell:
+
+    => help showvar
+    showvar
+	- print values of all hushshell variables
+    showvar name ...
+	- print value of hushshell variable 'name'
+
+    Also make the set_local_var() and unset_local_var ()
+    no longer static, so it is possible to define local
+    hush shell variables at boot time. If CONFIG_HUSH_INIT_VAR
+    is defined, u-boot calls hush_init_var (), where
+    boardspecific code can define local hush shell
+    variables at boottime.
+
+    Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit 67b23a322848d828a5e45c0567b72762bfde7abf
+Author: Heiko Schocher <hs@denx.de>
+Date:	Wed Oct 15 09:39:47 2008 +0200
+
+    I2C: adding new "i2c bus" Command to the I2C Subsystem.
+
+    With this Command it is possible to add new I2C Busses,
+    which are behind 1 .. n I2C Muxes. Details see README.
+
+    Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit c24853644ddd2dd2e4246b5854a93e6254a14092
+Author: Heiko Schocher <hs@denx.de>
+Date:	Wed Oct 15 09:39:08 2008 +0200
+
+    mgcoge, mgsuvd: add board specific I2C deblocking mechanism.
+
+    As documented in doc/I2C_Edge_Conditions, adding a
+    board specific deblocking mechanism via CFG_I2C_INIT_BOARD
+    for the mgcoge and mgsuvd board.
+
+    This code was originally written by Keymile in association
+    with Anatech and Atmel in 1998. The Code toggels the SCL
+    until the SCA line goes to HIGH (max. 16 times).
+    And after this, a start condition is sent.
+
+    This is another approach to deblock the I2C Bus. The
+    soft I2C driver actually sends 9 clocks with SDA High,
+    and then a stop at the end, to deblock the I2C Bus.
+
+    Maybe we should use the approach from Keymile as
+    the new standard?
+
+    Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit 4ca107effebfbabac1057c39632105dacef95957
+Author: Heiko Schocher <hs@denx.de>
+Date:	Wed Oct 15 09:38:38 2008 +0200
+
+    soft_i2c: Add CFG_I2C_INIT_BOARD option
+
+    This patch adds the option for a boardspecific
+    I2C deblocking mechanism for the soft i2c driver.
+
+    Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit e5e4edd9f1f76210a09c34ee835f6cff60fdbbd1
+Author: Heiko Schocher <hs@denx.de>
+Date:	Wed Oct 15 09:38:07 2008 +0200
+
+    mgcoge, mgsuvd: add DTT (LM75) support.
+
+    Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit 8e442df438ab677057571e3ac01846bff7719bce
+Author: Heiko Schocher <hs@denx.de>
+Date:	Wed Oct 15 09:37:34 2008 +0200
+
+    lm75: Make the LM75 MULTI_BUS compatible.
+
+    Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit 12f1678127c1df2b2878ba93c88948bedc060775
+Author: Heiko Schocher <hs@denx.de>
+Date:	Wed Oct 15 09:37:04 2008 +0200
+
+    lm75: fix Codingstyle issues.
+
+    Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit f2202450c75ba6934b356024101500ddcde6e2a6
+Author: Heiko Schocher <hs@denx.de>
+Date:	Wed Oct 15 09:36:33 2008 +0200
+
+    mgcoge, mgsuvd: added EEprom support.
+
+    Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit 9661bf9d120f760238b2a073b84f2baf05010057
+Author: Heiko Schocher <hs@denx.de>
+Date:	Wed Oct 15 09:36:03 2008 +0200
+
+    mgcoge, mgsuvd: add I2C support.
+
+    Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit 98aed379586a155292efbf3209356836584b601c
+Author: Heiko Schocher <hs@denx.de>
+Date:	Wed Oct 15 09:35:26 2008 +0200
+
+    soft_i2c: prevent compiler warnings if driver does not use CPU Pins.
+
+    This patch fixes the following warnings, when using
+    the soft_i2c driver using no CPU pins on MPC82xx or MPC8xx
+    systems:
+
+    soft_i2c.c: In function 'send_reset':
+    soft_i2c.c:93: warning: unused variable 'immr'
+    soft_i2c.c: In function 'send_start':
+    soft_i2c.c:124: warning: unused variable 'immr'
+    soft_i2c.c: In function 'send_stop':
+    soft_i2c.c:146: warning: unused variable 'immr'
+    soft_i2c.c: In function 'send_ack':
+    soft_i2c.c:171: warning: unused variable 'immr'
+    soft_i2c.c: In function 'write_byte':
+    soft_i2c.c:196: warning: unused variable 'immr'
+    soft_i2c.c: In function 'read_byte':
+    soft_i2c.c:244: warning: unused variable 'immr'
+
+    Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit 799b784aa00cb03a352847ab9f9acdde79b72d21
+Author: Heiko Schocher <hs@denx.de>
+Date:	Wed Oct 15 09:34:45 2008 +0200
+
+    i2c: add CONFIG_I2C_MULTI_BUS for soft_i2c and mpc8260 i2c driver.
+
+    Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit 0809ea2f4340ab2047400c7d3d3047f97987d0fd
+Author: Heiko Schocher <hs@denx.de>
+Date:	Wed Oct 15 09:34:05 2008 +0200
+
+    mgcoge: fix Coding Style issues.
+
+    Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit e43a27c49712203fe8848a17714330623edfb2eb
+Author: Heiko Schocher <hs@denx.de>
+Date:	Wed Oct 15 09:33:30 2008 +0200
+
+    I2C: add new command i2c reset.
+
+    If I2C Bus is blocked (see doc/I2C_Edge_Conditions),
+    it is not possible to get out of this, until the
+    complete Hardware gets a reset. This new commando
+    calls again i2c_init (and that calls i2c_init_board
+    if defined), which will deblock the I2C Bus.
+
+    Signed-off-by: Heiko Schocher <hs@denx.de>
+    Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 86e9cdf8c415c1a9725e9dae5237ba1e7bd9f686
+Author: Heiko Schocher <hs@denx.de>
+Date:	Wed Oct 15 09:32:25 2008 +0200
+
+    mgsuvd, mgcoge: move this 2 boards in one dir.
+
+    There are some more extensions, which are for both boards
+    and some more boards from this manufacturer will follow soon.
+
+    Signed-off-by: Heiko Schocher <hs@denx.de>
+    Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 1c6fe6eac75d695fde677af8330c0dbe75fb6a2b
+Author: Dirk Eibach <eibach@gdsys.de>
+Date:	Wed Oct 8 13:44:27 2008 +0200
+
+    hwmon: Add LM63 support
+
+    This patch adds support for the National LM63 temperature
+    sensor with integrated fan control. It's used on the GDSys
+    Neo board (405EP) which will be submitted later.
+
+    Signed-off-by: Dirk Eibach <eibach@gdsys.de>
+    Acked-by: Stefan Roese <sr@denx.de>
+
+commit 7ba890bf2f2b92831420243c058951aa831119fd
+Author: Kyungmin Park <kmpark@infradead.org>
+Date:	Wed Oct 8 11:01:17 2008 +0900
+
+    Add Red Black Tree support
+
+    Now it's used at UBI module. Of course other modules can use it.
+    If you want to use it, please define CONFIG_RBTREE
+
+    Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
+
+commit fbd85ad65dd9c98f36ed3fb12fe41f381b7d4794
+Author: richardretanubun <richardretanubun@ruggedcom.com>
+Date:	Mon Oct 6 16:10:53 2008 -0400
+
+    CONFIG_EFI_PARTITION: Added support for EFI partition in cmd_ext2fs.c
+
+    Added support for CONFIG_EFI_PARTITION to ext2 commands.
+    Signed-off-by: Richard Retanubun <RichardRetanubun@RugggedCom.com>
+
+commit 07f3d789b9beb7ce3278c974f4d5c8f51b6ab567
+Author: richardretanubun <richardretanubun@ruggedcom.com>
+Date:	Fri Sep 26 11:13:22 2008 -0400
+
+    Add support for CONFIG_EFI_PARTITION (GUID Partition Table)
+
+    The GUID (Globally Unique Identifier) Partition Table (GPT) is a part
+    of EFI. See http://en.wikipedia.org/wiki/GUID_Partition_Table
+
+    Based on linux/fs/partitions/efi.[ch]
+
+    Signed-off-by: Richard Retanubun <RichardRetanubun@RugggedCom.com>
+
+commit fbc87dc0546dff709b38f358e2c5d5e39c4ca374
+Author: Bartlomiej Sieka <tur@semihalf.com>
+Date:	Wed Oct 1 15:26:32 2008 +0200
+
+    FIT: output image load address for type 'firmware', fix message while there
+
+    Now that the auto-update feature uses the 'firmware' type for updates, it is
+    useful to inspect the load address of such images.
+
+    Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
+
+commit 4bae90904b69ce3deb9f7c334ef12ed74e18a275
+Author: Bartlomiej Sieka <tur@semihalf.com>
+Date:	Wed Oct 1 15:26:31 2008 +0200
+
+    Automatic software update from TFTP server
+
+    The auto-update feature allows to automatically download software updates
+    from a TFTP server and store them in Flash memory during boot. Updates are
+    contained in a FIT file and protected with SHA-1 checksum.
+
+    More detailed description can be found in doc/README.update.
+
+    Signed-off-by: Rafal Czubak <rcz@semihalf.com>
+    Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
+
+commit 3f0cf51dabacc2724731c5079a60ea989103bb8f
+Author: Bartlomiej Sieka <tur@semihalf.com>
+Date:	Wed Oct 1 15:26:27 2008 +0200
+
+    flash: factor out adjusting of Flash address to the end of sector
+
+    The upcoming automatic update feature needs the ability to adjust an
+    address within Flash to the end of its respective sector. Factor out
+    this functionality to a new function flash_sect_roundb().
+
+    Signed-off-by: Rafal Czubak <rcz@semihalf.com>
+    Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
+    Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit e83cc06375ac2bea0830c6ed0f9d8fdc3c1b27d5
+Author: Bartlomiej Sieka <tur@semihalf.com>
+Date:	Wed Oct 1 15:26:29 2008 +0200
+
+    net: Make TFTP server timeout configurable
+
+    There are two aspects of a TFTP transfer involving timeouts:
+    1. timeout waiting for initial server reply after sending RRQ
+    2. timeouts while transferring actual data from the server
+
+    Since the upcoming auto-update feature attempts a TFTP download during each
+    boot, it is undesirable to have a long delay when the TFTP server is not
+    available. Thus, this commit makes the server timeout (1.) configurable by two
+    global variables:
+
+    TftpRRQTimeoutMSecs
+    TftpRRQTimeoutCountMax
+
+    TftpRRQTimeoutMSecs overrides default timeout when trying to connect to a TFTP
+    server, TftpRRQTimeoutCountMax overrides default number of connection retries.
+    The total delay when trying to download a file from a non-existing TFTP server
+    is TftpRRQTimeoutMSecs x TftpRRQTimeoutCountMax milliseconds.
+
+    Timeouts during file transfers (2.) are unaffected.
+
+    Signed-off-by: Rafal Czubak <rcz@semihalf.com>
+    Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
+    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 49f3bdbba8071f56d950a9498b6cdb998b35340a
+Author: Bartlomiej Sieka <tur@semihalf.com>
+Date:	Wed Oct 1 15:26:28 2008 +0200
+
+    net: express the first argument to NetSetTimeout() in milliseconds
+
+    Enforce millisecond semantics of the first argument to NetSetTimeout() --
+    the change is transparent for well-behaving boards (CFG_HZ == 1000 and
+    get_timer() countiing in milliseconds).
+
+    Rationale for this patch is to enable millisecond granularity for
+    network-related timeouts, which is needed for the upcoming automatic
+    software update feature.
+
+    Summary of changes:
+    - do not scale the first argument to NetSetTimeout() by CFG_HZ
+    - change timeout values used in the networking code to milliseconds
+
+    Signed-off-by: Rafal Czubak <rcz@semihalf.com>
+    Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
+    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit c68a05feeb88de9fcf158e67ff6423c4cc988f88
+Author: richardretanubun <richardretanubun@ruggedcom.com>
+Date:	Mon Sep 29 18:28:23 2008 -0400
+
+    Adds two more ethernet interface to 83xx
+
+    Added as a convenience for other platforms that uses MPC8360 (has 8 UCC).
+    Six eth interface is chosen because the platform I am using combines
+    UCC1&2 and UCC3&4 as 1000 Eth and the other four UCCs as 10/100 Eth.
+
+    Signed-off-by: Richard Retanubun <RichardRetanubun@RugggedCom.com>
+    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 41410eee472b0f42e03a77f961bbc55ef58f3c01
+Author: Haiying Wang <Haiying.Wang@freescale.com>
+Date:	Wed Sep 24 11:42:12 2008 -0500
+
+    Change UEC PHY interface to RGMII on MPC8568MDS
+
+    Change UEC phy interface from GMII to RGMII on MPC8568MDS board
+
+    Because on MPC8568MDS, GMII interface is only recommended for 1000Mbps speed,
+    but RGMII interface can work at 10/100/1000Mbps, and RGMII interface works more stable.
+
+    Now both UEC1 and UEC2 can work properly under u-boot.
+
+    It is also in consistent with the kernel setting for 8568 UEC phy interface.
+
+    Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
+    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit b59b16ca24bc7e77ec113021a6d77b9b32fcf192
+Author: Wolfgang Denk <wd@denx.de>
+Date:	Sat Oct 18 21:30:31 2008 +0200
+
+    Prepare v2008.10 release: update CHANGELOG & Makefile
+
+    Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit f7a35a60cf45491871a5c28e9ad24db005487857
+Author: Heiko Schocher <hs@denx.de>
+Date:	Fri Oct 17 18:24:06 2008 +0200
+
+    mgcoge: add redundant environment sector
+
+    Signed-off-by: Heiko Schocher <hs@denx.de>
+    Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit c2537ee85954af9d036b18b644f3e18d837bf4a5
+Author: Heiko Schocher <hs@denx.de>
+Date:	Fri Oct 17 18:23:27 2008 +0200
+
+    mgsuvd: update size of environment
+
+    Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit fa7b1c07e9371aea8f87ee6d3c2ea5564bd8cc8d
+Author: Lepcha Suchit <Suchit.Lepcha@freescale.com>
+Date:	Thu Oct 16 13:38:00 2008 -0500
+
+    83xx NAND boot: wait for LTESR[CC]
+
+    At least some revisions of the 8313, and possibly other chips, do not
+    wait for all pages of the initial 4K NAND region to be loaded before
+    beginning execution; thus, we wait for it before branching out of the
+    first NAND page.
+
+    This fixes warm reset problems when booting from NAND on 8313erdb.
+
+    Signed-off-by: Scott Wood <scottwood@freescale.com>
+    Acked-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit bf29e0ea0af03d593c64614136acc723a7a022a2
+Author: Yuri Tikhonov <yur@emcraft.com>
+Date:	Fri Oct 17 12:54:18 2008 +0200
+
+    ppc4xx: PPC44x MQ initialization
+
+    Set the MQ Read Passing & MCIF Cycle limits to the recommended by AMCC
+    values. This fixes the occasional 440SPe hard locking issues when the 440SPe's
+    dedicated DMA engines are used (e.g. by the h/w accelerated RAID driver).
+
+    Previously the appropriate initialization had been made in Linux, by the
+    ppc440spe ADMA driver, which is wrong because modifying the MQ configuration
+    registers after normal operation has begun is not supported and could
+    have unpredictable results.
+
+    Comment from Stefan: This patch doesn't change the resulting value of the
+    MQ registers. It explicitly sets/clears all bits to the desired state which
+    better documents the resulting register value instead of relying on pre-set
+    default values.
+
+    Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
+    Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit ec081c2c190148b374e86a795fb6b1c49caeb549
+Author: Stefan Roese <sr@denx.de>
+Date:	Fri Oct 17 12:51:46 2008 +0200
+
+    ppc4xx: PPC44x MQ initialization
+
+    Set the MQ Read Passing & MCIF Cycle limits to the recommended by AMCC
+    values. This fixes the occasional 440SPe hard locking issues when the 440SPe's
+    dedicated DMA engines are used (e.g. by the h/w accelerated RAID driver).
+
+    Previously the appropriate initialization had been made in Linux, by the
+    ppc440spe ADMA driver, which is wrong because modifying the MQ configuration
+    registers after normal operation has begun is not supported and could
+    have unpredictable results.
+
+    Comment from Stefan: This patch doesn't change the resulting value of the
+    MQ registers. It explicitly sets/clears all bits to the desired state which
+    better documents the resulting register value instead of relying on pre-set
+    default values.
+
+    Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
+    Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit f7d190b1c0b3ab7fc53074ad2862f7de99de37ff
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date:	Thu Oct 16 21:58:50 2008 -0500
+
+    85xx: Using proper I2C source clock divider for MPC8544
+
+    The MPC8544 RM incorrect shows the SEC_CFG bit in PORDEVSR2 as being
+    bit 26, instead it should be bit 28.  This caused in incorrect
+    interpretation of the i2c_clk which is the same as the SEC clk on
+    MPC8544.  The SEC clk is controlled by cfg_sec_freq that is reported
+    in PORDEVSR2.
+
+    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 42653b826adb319a1df06e24ef26096b2a5d9d2a
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date:	Thu Oct 16 21:58:49 2008 -0500
+
+    Revert "85xx: Using proper I2C source clock divider for MPC8544"
+
+    This reverts commit dffd2446fb041f38ef034b0fcf41e51e5e489159.
+
+    The fix introduced by this patch is not correct.  The problem is
+    that the documentation is not correct for the MPC8544 with regards
+    to which bit in PORDEVSR2 is for the SEC_CFG.
+
+    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 2179c4766bffeece98e5e92040629a96c97e230c
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date:	Wed Oct 15 10:19:41 2008 -0500
+
+    85xx: Fix compile warning
+
+    mpc8536ds.c: In function 'is_sata_supported':
+    mpc8536ds.c:614: warning: unused variable 'devdisr'
+
+    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 9029b68f3f81b3013044f167ea025e836e6c8c0e
+Author: Jason Jin <Jason.jin@freescale.com>
+Date:	Wed Oct 15 10:40:24 2008 +0800
+
+    Fix the function conflict in x86emu when DEBUG is on
+
+    The function parse_line() in common/main.c was exposed globally by commit
+    6636b62a6efc7f14e6e788788631ae7a7fca4537, Result in conflict with the same
+    name funciton in drivers/bios_emulator/x86emu/debug.c when define the DEBUG.
+    This patch fix this by renaming the function in the debug.c file.
+
+    Signed-off-by: Jason Jin <Jason.jin@freescale.com>
+
+commit b4dbacf69a669a17487054552fc2761149dd6767
+Author: Wolfgang Denk <wd@denx.de>
+Date:	Wed Oct 15 15:50:45 2008 +0200
+
+    Coding Style cleanup, update CHANGELOG, prepare 2008.10-rc3
+
+    Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 374b9038293d01d8744a46af9b7854a6fd99b228
+Author: Heiko Schocher <hs@denx.de>
+Date:	Wed Oct 15 09:51:19 2008 +0200
+
+    Fix compiler warning in lib_ppc/board.c
+
+    Fix compiler warning introduced by commit 0f8cbc18
+
+    Signed-off-by: Heiko Schocher <hs@denx.de>
+    Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 9724555755a6f1066636481b41f7094e0ce93a69
+Author: Selvamuthukumar <selva.muthukumar@e-coninfotech.com>
+Date:	Thu Oct 9 10:29:14 2008 +0530
+
+    mpc83xx: wait till UPM completes the write to array
+
+    Reference manual states that MxMR[MAD] increment is the indication
+    of write to UPM array is complete. Honour that. Also, make the dummy
+    write explicit.
+
+    also fix the comment.
+
+    Signed-off-by: Selvamuthukumar <selva.muthukumar@e-coninfotech.com>
+    Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 03e2dbb18e858e2f7a6aaa437f290f3690d02d51
+Author: Selvamuthukumar <selva.muthukumar@e-coninfotech.com>
+Date:	Wed Oct 8 18:12:20 2008 -0500
+
+    Remove unwanted ';' at end of define.
+
+    Currently this is not creating any problem. But it will result
+    in compilation error when used as below.
+
+    printf("CFG_SDRAM_CFG2 - %08x\n", CFG_SDRAM_CFG2);
+
+    Signed-off-by: Selvamuthukumar <selva.muthukumar@e-coninfotech.com>
+
+    continuation of the theme based on git grep "^#define CFG_.*;$" include/
+
+    Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit b2934a56650e9a6c54432f9ce6dc36757967385e
+Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
+Date:	Mon Oct 6 10:53:59 2008 -0400
+
+    ARM DaVinci: Add maintainer information for SFFSDR board.
+
+    Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
+
+commit 12c6670f873ed632c264a6f3e8bf1297d5c3ddbc
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date:	Sat Oct 4 19:26:16 2008 +0200
+
+    api: fix type mismatch
+
+    This patch fixes a type mismatch and thus removes a compiler
+    warning when compiling with CONFIG_API on powerpc.
+
+    Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+
+commit 9bc2e4eee3bcb8e63847d7a733e0c607807d6141
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date:	Wed Oct 1 12:25:04 2008 -0500
+
+    cmd_i2c: Fix help for CONFIG_I2C_CMD_TREE && !CONFIG_I2C_MULTI_BUS
+
+    Original code displayed:
+     => help i2c
+     i2c i2c speed [speed] - show or set I2C bus speed
+     i2c md chip address[.0, .1, .2] [# of objects] - read from I2C device
+     ...
+
+    Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit a0b1b610e980e253d4c2519ee15bd0937c3f8be1
+Author: Wolfgang Denk <wd@denx.de>
+Date:	Tue Oct 14 22:13:41 2008 +0200
+
+    Update CHANGELOG
+
+    Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 0f8cbc1829d9c7d9616fd29b366a99d037facdcd
+Author: Jason Jin <Jason.jin@freescale.com>
+Date:	Fri Oct 10 11:41:01 2008 +0800
+
+    Do not init SATA when disabled on 8536DS.
+
+    SGMII and SATA share the serdes on MPC8536 CPU, When SATA disabled and the
+    driver still try to access the SATA registers, the cpu will hangup.
+    This patch try to fix this by reading the serdes status before the SATA
+    initialize.
+
+    Signed-off-by: Jason Jin <Jason.jin@freescale.com>
+    Acked-by: Andy Fleming <afleming@freescale.com>
+
+commit 9dbc366744960013965fce8851035b6141f3b3ae
+Author: Remy Bohmer <linux@bohmer.net>
+Date:	Fri Oct 10 10:23:22 2008 +0200
+
+    The PIPE_INTERRUPT flag is used wrong
+
+    At a lot of places in the code the PIPE_INTERRUPT flags and friends
+    are used wrong. The wrong bits are compared to this flag resulting
+    in wrong conditions. Also there are macros that should be used for
+    PIPE_* flags.
+    This patch tries to fix them all, however, I was not able to test the
+    changes, because I do not have any of these boards.
+
+    Review required!
+
+    Signed-off-by: Remy Bohmer <linux@bohmer.net>
+    Signed-off-by: Markus Klotzbuecher <mk@denx.de>
+
+commit 48867208444cb2a82e2af9c3249e90b7ed4a1751
+Author: Remy Bohmer <linux@bohmer.net>
+Date:	Fri Oct 10 10:23:21 2008 +0200
+
+    fix USB initialisation procedure
+
+    The max packet size is encoded as 0,1,2,3 for 8,16,32,64 bytes.
+    At some places directly 8,16,32,64 was used instead of the encoded
+    value. Made a enum for the options to make this more clear and to help
+    preventing similar errors in the future.
+
+    After fixing this bug it became clear that another bug existed where
+    the 'pipe' is and-ed with PIPE_* flags, where it should have been
+    'usb_pipetype(pipe)', or even better usb_pipeint(pipe).
+
+    Also removed the triple 'get_device_descriptor' sequence, it has no use,
+    and Windows nor Linux behaves that way.
+    There is also a poll going on with a timeout when usb_control_msg() fails.
+    However, the poll is useless, because the flag will never be set on a error,
+    because there is no code that runs in a parallel that can set this flag.
+    Changed this to something more logical.
+
+    Tested on AT91SAM9261ek and compared the flow on the USB bus to what
+    Linux is doing. There is no difference anymore in the early initialisation
+    sequence.
+
+    Signed-off-by: Remy Bohmer <linux@bohmer.net>
+    Signed-off-by: Markus Klotzbuecher <mk@denx.de>
+
+commit ec4d8c1c1d94a790c1473ae8aace282b817c3123
+Author: Nikita V. Youshchenko <yoush@cs.msu.su>
+Date:	Fri Oct 3 00:03:55 2008 +0400
+
+    fsl_diu: fix alignment error that caused malloc corruption
+
+    When aligning malloc()ed screen_base, invalid offset was added.
+    This not only caused misaligned result (which did not cause hardware
+    misbehaviour), but - worse - caused screen_base + smem_len to
+    be out of malloc()ed space, which in turn caused breakage of
+    futher malloc()/free() operation.
+
+    This patch fixes screen_base alignment.
+
+    Also this patch makes memset() that cleans framebuffer to be executed
+    on first initialization of diu, not only on re-initialization. It looks
+    correct to clean the framebuffer instead of displaying random garbage;
+    I believe that was disabled only because that memset caused breakage
+    of malloc/free described above - which no longer happens with the fix
+    described above.
+
+    Signed-off-by: Nikita V. Youshchenko <yoush@debian.org>
+
+commit 3d0ea3110f3431b6c2aee882784f39f97b20bce9
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date:	Wed Sep 24 10:29:37 2008 +0200
+
+    api: Fix building with CONFIG_API
+
+    This patch fixes building with CONFIG_API and CONFIG_USB_STORAGE.
+
+    USB_MAX_STOR_DEV is defined in include/usb.h, but
+    needed in api/api_storage.c.
+
+    Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+
+commit abbb90666d5ef2f500ebbedbb80ff60adc56b043
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date:	Tue Sep 23 12:39:40 2008 -0500
+
+    Remove unused CFG_EEPROM_PAGE_WRITE_ENABLE references
+
+    Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit 81e612014c40c922ec35488d17c504d4e9286f06
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date:	Tue Sep 23 12:38:42 2008 -0500
+
+    Remove CFG_EEPROM_PAGE* dependencies for temperature sensors
+
+    The checks for CFG_EEPROM_PAGE_WRITE_ENABLE and
+    CFG_EEPROM_PAGE_WRITE_BITS in various temperature
+    sensor drivers are not necessary
+
+    Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit c46980f6d2135ade345dadc1fb1f1f4c8bbf255a
+Author: Mike Frysinger <vapier@gentoo.org>
+Date:	Tue Oct 14 07:04:38 2008 -0400
+
+    cmd_spi: remove broken signed casting for display
+
+    Since we're working with unsigned data, you can't apply a signed pointer
+    cast and then attempt to print the result.	Otherwise you get wrong output
+    when the sign bit is set like "0xFF" incorrectly extended to "0xFFFFFFFF".
+
+    Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit d5fd0b49210c941de8a1fce3947ace92243ab5ca
+Author: Mike Frysinger <vapier@gentoo.org>
+Date:	Tue Oct 14 07:05:24 2008 -0400
+
+    strings cmd: drop old CONFIG_CFG_STRINGS define
+
+    We don't need CONFIG_CFG_STRINGS anymore now that we have the define
+    CONFIG_CMD_STRINGS and Makefile control.
+
+    Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit fecb5ade3b37f62981f2b05b621005850173aaa9
+Author: Jason Jin <Jason.jin@freescale.com>
+Date:	Fri Sep 19 17:32:49 2008 +0800
+
+    Fix the NAND size overflow issue.
+
+    When the total size of all NAND devices exceeds 4 GiB, the size  will
+    overflow. This patch tries to fix this.
+
+    Note that we still have a problem when a single NAND device is bigger
+    than 4 GiB: then the overflow would actually happen earlier, i. e.
+    when storing the size in nand_info[].size, as nand_info[].size is an
+    "u_int32_t".
+
+    Signed-off-by: Jason Jin <Jason.jin@freescale.com>
+    Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 30f574717277238b9014b8136c90eea77196490f
+Author: Louis Su <louis@asix.com.tw>
+Date:	Wed Jul 9 11:01:37 2008 +0800
+
+    AX88180: new gigabit network driver
+
+    Signed-off-by: Louis Su <louis@asix.com.tw>
+    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit c9d6b6925344740ca1db2f8a6bab7921ff820de3
+Author: Andre Schwarz <andre.schwarz@matrix-vision.de>
+Date:	Tue Aug 19 16:07:03 2008 +0200
+
+    enable 10/100M at VSC8601 at tsec driver
+
+    Currently VSC8601 doesn't link with 10/100M partners if the
+    EEPROM/Strapping is not set up.
+    Setting the auto-neg register fixes this.
+
+    Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de>
+    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 702c85b0e876d587c11acdbb55738ee52acd54f4
+Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+Date:	Tue Sep 30 15:02:53 2008 +0900
+
+    net: ne2000: Divided a function of NE2000 driver
+
+    get_prom function was used __attriute__ , but it is not enable.
+    ax88796.o does not do link besides ne2000.o. When ld is carried
+    out, get_prom function of ax88796.c is ignored.
+    This problem is a thing by specifications of ld.
+    I checked and test this patch on SuperH and MIPS.
+
+    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 05c7e9070fe4d751e029fd9524bfbbc93cbb1393
+Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+Date:	Tue Oct 14 11:10:59 2008 +0900
+
+    sh: rsk7203: Add smc911x driver support to board config file
+
+    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit cae6f909baf86357b3c0bd01acfc414348c4d175
+Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+Date:	Thu Oct 9 13:54:33 2008 +0900
+
+    sh: Fix cannot execute a stand-alone application
+
+    Address calculated in EXPORT_FUNC in SuperH was wrong, I revised it.
+
+    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit 6df0efd5c86ca1689deeb2738b46b7d83ce228ef
+Author: Ed Swarthout <Ed.Swarthout@freescale.com>
+Date:	Wed Oct 8 23:38:00 2008 -0500
+
+    fsl_pci_init do not scan bus when configured as an end-point
+
+    Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
+    Acked-by: Andy Fleming <afleming@freescale.com>
+
+commit 6f099bbac1ba5dfb46ee7ad29dc53713f0501ba5
+Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
+Date:	Tue Sep 16 17:07:53 2008 -0400
+
+    ARM DaVinci: Remove redundant setting of GD_FLG_RELOC for sffsdr board.
+
+    This is no longer necessary now that the GD_FLG_RELOC flag is set for
+    all ARM boards.
+
+    Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
+
+commit d977a57356657ba241256231efca32828a5822f9
+Author: Luigi 'Comio' Mantellini <luigi.mantellini@idf-hit.com>
+Date:	Sat Sep 13 10:04:32 2008 +0200
+
+    Fix lzma uncompress call (image_start wrongly used instead image_len)
+
+    Signed-off-by: Luigi 'Comio' Mantellini <luigi.mantellini@idf-hit.com>
+
+commit 392438406041415fe64ab8748ec5ab5ad01d1cf7
+Author: Nick Spence <nick.spence@freescale.com>
+Date:	Thu Aug 28 14:09:15 2008 -0700
+
+    mpc86xx: use r4 instead of r2 in lock_ram_in_cache and unlock_ram_in_cache
+
+    This is needed in unlock_ram_in_cache() because it is called from C and
+    will corrupt the small data area anchor that is kept in R2.
+
+    lock_ram_in_cache() is modified similarly as good coding practice, but
+    is not called from C.
+
+    Signed-off-by: Nick Spence <nick.spence@freescale.com>
+
+commit 5c7cbcd34d0ee566875a4fd0f2a3e5a62bba921c
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date:	Tue Aug 19 15:05:34 2008 -0500
+
+    86xx: remove redudant code with lib_ppc/interrupts.c
+
+    For some reason we duplicated the majority of code in lib_ppc/interrupts.c
+    Not know how that happened, but there is no good reason for it.
+
+    Use the interrupt_init_cpu() and timer_interrupt_cpu() since its why
+    they exist.
+
+    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 0d01f66d235118515b5086b88f82498bc0695d6a
+Author: Ed Swarthout <Ed.Swarthout@freescale.com>
+Date:	Thu Oct 9 01:26:36 2008 -0500
+
+    CFI: cfi_flash write fix for AMD legacy
+
+    The flash_unlock_seq requires a sector for AMD_LEGACY.
+    Fix a retcode check typeo.
+
+    Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
+    Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 542b385a620a1783454a00424930e51895f45073
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date:	Tue Oct 7 13:13:10 2008 +0200
+
+    ppc4xx: Fix USB 2.0 phy reset sequence
+
+    This patch fixes USB 2.0 communication issues on some DU440 boards.
+
+    Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+    Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit df8c1ce11114c2260dedb5547281945f7db8fa5c
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date:	Tue Oct 7 13:13:09 2008 +0200
+
+    ppc4xx: Add strapping mode for 667MHz CPU frequency on DU440 board
+
+    Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+    Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 6a133d6a00b1fc7b9257cd5925d8cb67f75ecda2
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date:	Tue Oct 7 13:13:08 2008 +0200
+
+    ppc4xx: Fix DU440 GPIO configuration
+
+    Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+    Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 35dd025c70fcc4389317db2f2a9d14795172137d
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date:	Tue Oct 7 13:13:07 2008 +0200
+
+    ppc4xx: Update DU440 config
+
+    Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+    Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit f3bf9273939ffe1a60a32a2eef909097f15df56b
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date:	Wed Oct 8 15:36:39 2008 -0500
+
+    MPC8572DS: Fix compile warnings
+
+    Commit 445a7b38308eb05b41de74165b20855db58c7ee5 introduced the following
+    compile warnings:
+
+    cmd_i2c.c:112: warning: missing braces around initializer
+    cmd_i2c.c:112: warning: (near initialization for 'i2c_no_probes[0]')
+
+    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit dffd2446fb041f38ef034b0fcf41e51e5e489159
+Author: Wolfgang Grandegger <wg@grandegger.com>
+Date:	Tue Sep 30 10:55:57 2008 +0200
+
+    85xx: Using proper I2C source clock divider for MPC8544
+
+    Measurements with our MPC8544 board showed that the I2C bus frequency
+    is wrong by a factor of 1.5. Obviously, the interpretation of the
+    MPC85xx_PORDEVSR2_SEC_CFG bit of the cfg_sec_freq register is not
+    correct. There seems to be an error in the 8544 RM.
+
+    Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
+
+commit e46c7bfb8bc3c304cedd20f7a365d6e78d7eaf17
+Author: Rafal Czubak <rcz@semihalf.com>
+Date:	Wed Oct 8 13:41:30 2008 +0200
+
+    FSL: Fix get_cpu_board_revision() return value.
+
+    get_cpu_board_revision() returned board revision based on information stored
+    in global static struct eeprom. It should instead use one from local struct
+    board_eeprom, to which the data is actually read from EEPROM. The bug led to
+    system hang after printing L1 cache information on U-Boot startup. The problem
+    was observed on MPC8555CDS system and possibly affects other Freescale MPC85xx
+    boards using CFG_I2C_EEPROM_CCID.
+
+    The change has been successfully tested on MPC8555CDS system.
+
+    Signed-off-by: Rafal Czubak <rcz@semihalf.com>
+
+commit 747f316cca484ed627a97dd3391febabce384186
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date:	Tue Sep 30 20:08:49 2008 +0200
+
+    update uImage FIT multi documentation
+
+    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 77a0355f60b801f232ce0a5bfbe95331fa3b6bc0
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date:	Tue Sep 30 20:08:36 2008 +0200
+
+    move README.imx31 to doc/ and merge with README.mx31
+
+    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 1ed7a7f0f571b13d46530f8f8b9aff3957f15a96
+Author: Guennadi Liakhovetski <lg@denx.de>
+Date:	Thu Sep 25 20:54:37 2008 +0200
+
+    i.MX31: switch to CFG_HZ=1000
+
+    Switch to the standard CFG_HZ=1000 value, while at it, minor white-space
+    cleanup, remove CFG_CLKS_IN_HZ from config-headers. Tested on mx31ads,
+    provides 2% or 0.4% precision depending on the
+    CONFIG_MX31_TIMER_HIGH_PRECISION flag. Measured with stop-watch on 100s
+    boot-delay.
+
+    Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
+
+commit f41b144c11341b571eab7dcef6c4b8e03c92d2b2
+Author: gnusercn <gnusercn@gmail.com>
+Date:	Wed Oct 8 18:58:58 2008 +0200
+
+    Fix bug: in arch-arm, env_get_char dose not work fine
+
+    due to the arm implementation which supposed that U-Boot is in RAM
+    when we jump to start_armboot
+
+    Signed-off-by: gnusercn <gnusercn@gmail.com>
+    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit f8a00dea841d5d75de1f8e8107e90ee1beeddf5f
+Author: Adam Graham <agraham@amcc.com>
+Date:	Mon Oct 6 10:16:13 2008 -0700
+
+    ppc4xx: Reset and relock memory DLL after SDRAM_CLKTR change
+
+    After changing SDRAM_CLKTR phase value rerun the memory preload
+    initialization sequence (INITPLR) to reset and relock the memory
+    DLL. Changing the SDRAM_CLKTR memory clock phase coarse timing
+    adjustment effects the phase relationship of the internal, to the
+    PPC chip, and external, to the PPC chip, versions of MEMCLK_OUT.
+
+    Signed-off-by: Adam Graham <agraham@amcc.com>
+    Signed-off-by: Victor Gallardo <vgallardo@amcc.com>
+    Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 5297246bbaa9943c0da1ec2e717b72e4ab6b830e
+Author: Haiying Wang <Haiying.Wang@freescale.com>
+Date:	Fri Oct 3 11:48:03 2008 -0400
+
+    Remove redundant #define for MPC8536DS
+
+    Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
+
+commit 445a7b38308eb05b41de74165b20855db58c7ee5
+Author: Haiying Wang <Haiying.Wang@freescale.com>
+Date:	Fri Oct 3 11:47:30 2008 -0400
+
+    Add ID EEPROM support for MPC8572DS
+
+    The ID EEPROM on MPC8572DS board locates on I2C bus 1. Its the storage for
+    system information like mac addresses etc. This patch enables it.
+
+    Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
+
+commit 1f3ba317a5c5f3a7aabf580fddc211f4bb5a4540
+Author: Haiying Wang <Haiying.Wang@freescale.com>
+Date:	Fri Oct 3 11:46:59 2008 -0400
+
+    Minor fixes for I2C address on MPC8572DS
+
+    MPC8572DS has two i2c buses. This patch moves the DDR SPD_EEPROM to i2c bus 1
+    according to the board spec, and adds the 2nd i2c bus offset.
+
+    Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
+
+commit c0391111c33c22fabeddf8f4ca801ec7645b4f5c
+Author: Jason Jin <Jason.jin@freescale.com>
+Date:	Sat Sep 27 14:40:57 2008 +0800
+
+    Fix the incorrect DDR clk freq reporting on 8536DS
+
+    On 8536DS board, When the DDR clk is set async mode(SW3[6:8] != 111),
+    The display is still sync mode DDR freq. This patch try to fix
+    this. The display DDR freq is now the actual freq in both
+    sync and async mode.
+
+    Signed-off-by: Jason Jin <Jason.jin@freescale.com>
+
+commit bac6a1d1fa1cd80aa57881fa9c2152b853cd0ed4
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date:	Tue Oct 7 10:28:46 2008 -0500
+
+    85xx: Remove setting of *cache-line-size in device trees
+
+    ePAPR says if the *cache-block-size is the same as *cache-line-size
+    than we don't need the *cache-line-size property.
+
+    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit cd3cb0d9269d155276b00207e3816a9347fd1c92
+Author: Gerald Van Baren <vanbaren@cideas.com>
+Date:	Sat Oct 4 07:56:06 2008 -0400
+
+    libfdt: Fix error in documentation for fdt_get_alias_namelen()
+
+    Oops, screwed up the function name in the documenting comment for this
+    function.  Trivial correction in this patch.
+
+    Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
+    Acked-by: Gerald Van Baren <vanbaren@cideas.com>
+
+commit 9a6cf73a88ddab2e1ac39088f2806177982cc62c
+Author: David Gibson <david@gibson.dropbear.id.au>
+Date:	Wed Aug 20 16:55:14 2008 +1000
+
+    libfdt: Add function to explicitly expand aliases
+
+    Kumar has already added alias expansion to fdt_path_offset().
+    However, in some circumstances it may be convenient for the user of
+    libfdt to explicitly get the string expansion of an alias.	This patch
+    adds a function to do this, fdt_get_alias(), and uses it to implement
+    fdt_path_offset().
+
+    Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
+
+commit 2215987e100d2a841ae6d48a7cc9bb83fcf22737
+Author: Mike Frysinger <vapier@gentoo.org>
+Date:	Thu Oct 2 01:55:38 2008 -0400
+
+    cfi_flash: do not reset flash when probe fails
+
+    The CFI flash driver starts at flash_init() which calls down into
+    flash_get_size().  This starts by calling flash_detect_cfi().  If said
+    function fails, flash_get_size() finishes by attempting to reset the
+    flash.  Unfortunately, it does this with an info->portwidth set to 0x10
+    which filters down into flash_make_cmd() and that happily smashes the
+    stack by sticking info->portwidth bytes into a cfiword_t variable that
+    lives on the stack.  On a 64bit system you probably won't notice, but
+    killing the last 8 bytes on a 32bit system usually leads to a corrupt
+    return address.  Which is what happens on a Blackfin system.
+
+    Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+    Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 3e38577208e4256956bc33bb8bcd0a6b6fab55c3
+Author: Stefan Roese <sr@denx.de>
+Date:	Fri Sep 26 17:03:26 2008 +0200
+
+    fdt: Overwrite /chosen node in bootm if it already exists in the dtb
+
+    Set force parameter in fdt_chosen() call in do_bootm_linux() call.
+    Without this, the chosen node is not overwritten if it already
+    exists.
+
+    Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 741a6d010d09b5bafca8e4cdfb6b2f8a2c07994d
+Author: Jon Loeliger <jdl@freescale.com>
+Date:	Thu Sep 25 11:02:17 2008 -0500
+
+    Fix an overflow case in fdt_offset_ptr() detected by GCC 4.3.
+
+    Using Gcc 4.3 detected this problem:
+
+	../dtc/libfdt/fdt.c: In function 'fdt_next_tag':
+	../dtc/libfdt/fdt.c:82: error: assuming signed overflow does not
+	occur when assuming that (X + c) < X is always false
+
+    To fix the problem, treat the offset as an unsigned int.
+
+    The problem report and proposed fix were provided
+    by Steve Papacharalambous <stevep@freescale.com>.
+
+    Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit bbdbc7cb3abefda5bd998edbcf0508fe6256327d
+Author: David Gibson <david@gibson.dropbear.id.au>
+Date:	Fri Aug 29 14:19:13 2008 +1000
+
+    libfdt: Fix bugs in fdt_get_path()
+
+    The current implementation of fdt_get_path() has a couple of bugs,
+    fixed by this patch.
+
+    First, contrary to its documentation, on success it returns the length
+    of the node's path, rather than 0.	The testcase is correspondingly
+    wrong, and the patch fixes this as well.
+
+    Second, in some circumstances, it will return -FDT_ERR_BADOFFSET
+    instead of -FDT_ERR_NOSPACE when given insufficient buffer space.
+    Specifically this happens when there is insufficient space even to
+    hold the path's second last component.  This behaviour is corrected,
+    and the testcase updated to check it.
+
+    Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
+
+commit 33af3e6656e84660d397b5dd95abab2dccc36f83
+Author: Wolfgang Denk <wd@denx.de>
+Date:	Wed Oct 1 12:34:58 2008 +0200
+
+    TQM5200: enable support for ATAPI devices
+
+    Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit d13ff2358ff8c384f52eaf46f5d60258acf96ea6
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date:	Mon Sep 15 05:48:25 2008 +0200
+
+    Revert "ARM: set GD_FLG_RELOC for boards skipping relocation to RAM"
+
+    we need this due to the arm implementation which supposed that U-Boot
+    is in RAM when we jump to start_armboot
+
+    This reverts commit f96b44cef897bd372beb86dde1b33637c119d84d.
+    in order to do it for all arm board
+
+    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 7fd0bea2e4a78eab7e6693140940f9f9a0009bc2
+Author: Kim Phillips <kim.phillips@freescale.com>
+Date:	Wed Sep 24 08:46:25 2008 -0500
+
+    mpc83xx: don't disable autoboot
+
+    bootdelay set to -1 'permanently' disables autobooting, even if
+    bootcmd is specified.  Change to a positive value to allow
+    autobooting when a bootcmd is set.
+
+    Reported-by: Coray Tate <Coray.Tate@freescale.com>
+    Cc: Scott Wood <scottwood@freescale.com>
+    Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 2fb29c520c42b7bfef33ea3fd1527eba64099164
+Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+Date:	Wed Sep 24 10:42:15 2008 +0900
+
+    mpc83xx: Fix typo in include/mpc83xx.h
+
+    Fixed typo from CONIFG_MPC837X to CONFIG_MPC837X
+
+    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+    Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 162c41c03179727a1d14262f703c9a8bc40231fa
+Author: Kim Phillips <kim.phillips@freescale.com>
+Date:	Tue Sep 23 09:38:49 2008 -0500
+
+    mpc83xx: add h/w flash protection to board configs
+
+    the operating system may leave flash in a h/w locked state after writing.
+    This allows u-boot to continue to write flash by enabling h/w unlocking
+    by default.
+
+    Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit d26154c9a692586b66eb6d1f8e1b67c75e40ea70
+Author: Anton Vorontsov <avorontsov@ru.mvista.com>
+Date:	Thu Sep 11 21:35:36 2008 +0400
+
+    mpc83xx: spd_sdram: fix ddr sdram base address assignment bug
+
+    The spd_dram code shifts the base address, then masks 20 bits, but
+    forgets to shift the base address back. Fix this by just masking the
+    base address correctly.
+
+    Found this bug while trying to relocate a DDR memory at the base != 0.
+
+    Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
+    Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 8fd4166c467a46773f80208bda1ec3b4757747bc
+Author: Stefan Roese <sr@denx.de>
+Date:	Mon Sep 22 16:10:43 2008 +0200
+
+    ppc4xx: Canyonlands: Remove unnecessary FDT warning upon DTB fixup
+
+    Depending on the configuration jumper "SATA SELECT", U-Boot disabled
+    either one PCIe node or the SATA node in the device tree blob. This
+    patch removes the unnecessary and even confusing warning, when the node
+    is not found at all.
+
+    Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 6e24a1eb1490aa043770bcf0061ac1fad0864fd9
+Author: Remy Bohmer <linux@bohmer.net>
+Date:	Fri Sep 19 13:30:06 2008 +0200
+
+    Add missing device types to dev_print() in part.c
+
+    Signed-off-by: Remy Bohmer <linux@bohmer.net>
+
+commit 5fdc215f0b351b0c36cc3f8a0fa5850f24454bed
+Author: Wolfgang Denk <wd@denx.de>
+Date:	Mon Sep 22 22:23:06 2008 +0200
+
+    Fix DPRAM memory leak when CFG_ALLOC_DPRAM is defined, which
+    eventually leads to a machine check. This change assures that DPRAM
+    is allocated only once in that case.
+
+    Signed-off-by: Gary Jennejohn <garyj@denx.de>
+    Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit a07faf7b9ad5a86763a577c79922c4ff9a70ef23
+Author: Laurent Pinchart <laurentp@cse-semaphore.com>
+Date:	Wed Sep 17 17:57:34 2008 +0200
+
+    Fix Spartan-3 definitions.
+
+    A few Spartan-3 definitions erroneously use Spartan-3E size
+    constants. This patch fixes them.
+
+    Signed-off-by: Laurent Pinchart <laurentp@cse-semaphore.com>
+
+commit 28113e1f0da4146b823ffce37680d31d5685a60b
+Author: Laurent Pinchart <laurentp@cse-semaphore.com>
+Date:	Wed Sep 17 17:41:58 2008 +0200
+
+    Remove duplicate Spartan-3E definition.
+
+    Signed-off-by: Laurent Pinchart <laurentp@cse-semaphore.com>
+    Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 5c65ecf7cd94df250b295621f3b24135cbcfe579
+Author: Anatolij Gustschin <agust@denx.de>
+Date:	Wed Sep 17 13:46:17 2008 +0200
+
+    socrates: change default mtest address range
+
+    Running mtest command on socrates without specifying
+    an address range crashes the board. This patch changes
+    default mtest address range to prevent this behavior.
+
+    Signed-off-by: Anatolij Gustschin <agust@denx.de>
+
+commit d666b2d59674b5e002c0821b7ab83ec3ff90d670
+Author: Anatolij Gustschin <agust@denx.de>
+Date:	Wed Sep 17 12:34:45 2008 +0200
+
+    socrates: fix crash after relocation
+
+    Currently U-Boot crashes after relocation to RAM.
+    Changing the CPO value of the DDR SDRAM TIMING_CFG_2
+    register to READ_LAT + 1 (to the value it was before
+    conversion of socrates to new DDR code) fixes the
+    problem.
+
+    Signed-off-by: Anatolij Gustschin <agust@denx.de>
+
+commit 562788b0a303f3528b920d81f547f5ca77ba528e
+Author: Anatolij Gustschin <agust@denx.de>
+Date:	Wed Sep 17 11:45:51 2008 +0200
+
+    socrates: fix SPD EEPROM address
+
+    Commit be0bd8234b9777ecd63c4c686f72af070d886517
+    changed SPD EEPROM address to 0x51 and DDR SDRAM
+    detection stopped working. Change this address
+    back to 0x50.
+
+    Signed-off-by: Anatolij Gustschin <agust@denx.de>
+
+commit 023824549a370bd185d7129d9a6c86f9be7b86a8
+Author: Stefan Roese <sr@denx.de>
+Date:	Mon Sep 22 11:06:50 2008 +0200
+
+    Revert "ppc4xx: Fix DDR2 auto calibration on Kilauea 600MHz (200MHz PLB)"
+
+    This reverts commit 3eec160a3a405b29ce9c06920f6427b9047dd8a8.
+
+    Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit e58c41e26cf3c8accd60311be579f452e368e97e
+Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+Date:	Thu Sep 18 20:13:08 2008 +0900
+
+    usb: Fix compile warning of r8a66597-hcd
+
+    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+    Signed-off-by: Markus Klotzbuecher <mk@denx.de>
+
+commit b5d10a13525c07ec6374adf840d7c87553b5f189
+Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+Date:	Thu Sep 18 19:34:36 2008 +0900
+
+    sh: Fix compile warning
+
+    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit 4a065abf926f128beb36d93449defa0d690e7fef
+Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+Date:	Thu Sep 18 19:04:26 2008 +0900
+
+    sh: Add support watchdog for SH4A core
+
+    Add support watchdog for SH4A core (SH7763, SH7780 and SH7785).
+    And fix some compile warning.
+
+    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit a03c09c5fdb8430fe2ae6a03f88a0cf7bcc0aa57
+Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+Date:	Wed Sep 17 11:45:26 2008 +0900
+
+    sh: Fix typo in SH serial driver
+
+    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit 6b44a439215ba7c63f666f8099213ea4f05f2b07
+Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+Date:	Wed Sep 17 11:08:36 2008 +0900
+
+    sh: Add support any page size and empty_zero_page to SH Linux uImage
+
+    Old U-Boot supported 4KB page size only. If this version, Linux
+    kernel can not get command line from U-Boot.
+    SH Linux kernel can change page size and empty_zero_page.
+    This patch support this function and fix promlem.
+
+    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit ce9f99ddb59628f41dc534e892368a7d66dfc774
+Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+Date:	Thu Aug 28 13:40:52 2008 +0900
+
+    sh: rsk7203: Add support pkt_data_pull and pkt_data_push function
+
+    Add function of smc911x, pkt_data_pull and pkt_data_push.
+
+    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit dd820b03a2f45e86e7960e26729a3b58e3dda44a
+Author: Wolfgang Denk <wd@denx.de>
+Date:	Thu Sep 18 13:57:32 2008 +0200
+
+    ADS5121: fix typo in "rootpath" default setting
+
+    Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit c9e8436b10cca53fca4904ecbadcd6231ad72c38
+Author: Remy Bohmer <linux@bohmer.net>
+Date:	Tue Sep 16 14:55:44 2008 +0200
+
+    USB layer of U-Boot causes USB protocol errors while using USB memory sticks
+
+    There are several differences between Linux, Windows and U-boot for initialising the
+    USB devices. While analysing the behaviour of U-boot it turned out that U-boot does
+    things really different, and some are wrong (compared to the USB standard).
+
+    This patch fixes some errors:
+    * The NEW_init procedure that was already in the code is good, while the old procedure
+      is wrong. See code comments for more info.
+    * On a Control request the data returned by the device can be more than 8 bytes, while
+      the host limits it to 8 bytes. This caused the host to generate a DataOverrun error.
+      This results in a lot of USB sticks not being recognised, and the transmission ended
+      frequently with a CTL:TIMEOUT Error.
+    * Added a flag CONFIG_LEGACY_USB_INIT_SEQ to allow users to use the old init procedure.
+
+    Signed-off-by: Remy Bohmer <linux@bohmer.net>
+    Signed-off-by: Markus Klotzbuecher <mk@denx.de>
+
+commit 6f5794a6f78b313231256958fd73673c6aacc116
+Author: Remy Bohmer <linux@bohmer.net>
+Date:	Tue Sep 16 14:55:43 2008 +0200
+
+    Refactoring parts of the common USB OHCI code
+
+    This patch refactors some large routines of the USB OHCI code by
+    making some routines smaller and more readable which helps
+    debugging and understanding the code. (Makes the code looks
+    somewhat more like the Linux implementation.)
+
+    Also made entire file compliant to Linux Coding Rules (checkpatch.pl compliant)
+
+    Signed-off-by: Remy Bohmer <linux@bohmer.net>
+    Signed-off-by: Markus Klotzbuecher <mk@denx.de>
+
+commit be19d324edc1a1d7f393d24e10d164cd94c91a00
+Author: Remy Bohmer <linux@bohmer.net>
+Date:	Tue Sep 16 14:55:42 2008 +0200
+
+    Fix for USB sticks not working on ARM while using GCC 4.x compilers
+
+    The GCC-compiler makes an optimisation error while optimising the routine
+    usb_set_maxpacket(). This should be fixed in the compiler in the first place,
+    but there lots of compilers out there that makes this error, that it is
+    probably wiser to workaround it in U-boot itself.
+
+    What happens is that the register r3 is used as loop-counter 'i', but gets
+    overwritten later on. From there it starts using register r3 for several other
+    things and the assembler code is becoming a big mess. This is clearly a compiler bug.
+
+    This error occurs on at least several versions of Code Sourcery Lite compilers
+    for ARM. Like the Edition 2008q1, and 2008q3, It has also been seen on other
+    compilers, while compiling for armv4t, or armv5te with Os, O1 and O2.
+
+    We work around it by splitting up this routine in 2 parts, and making sure that
+    the split out part is NOT inlined any longer. This will make GCC spit out assembler
+    that do not show this problem. Another possibility is to adapt the Makefile to stop
+    optimisation for the complete file. I think this solution is nicer.
+
+    Signed-off-by: Remy Bohmer <linux@bohmer.net>
+    Signed-off-by: Markus Klotzbuecher <mk@denx.de>
+
+commit 87b4ef560cf2da4ccc9e59711ad1ff7fafe96670
+Author: Wolfgang Denk <wd@denx.de>
+Date:	Wed Sep 17 10:17:55 2008 +0200
+
+    Coding style cleanup; update CHANEGLOG
+
+    Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 3eec160a3a405b29ce9c06920f6427b9047dd8a8
+Author: Victor Gallardo <vgallardo@amcc.com>
+Date:	Tue Sep 16 06:59:13 2008 -0700
+
+    ppc4xx: Fix DDR2 auto calibration on Kilauea 600MHz (200MHz PLB)
+
+    Signed-off-by: Victor Gallardo <vgallardo@amcc.com>
+    Signed-off-by: Adam Graham <agraham@amcc.com>
+    Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit ce47eb402c5e29a025399dc282246414fc492940
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date:	Tue Sep 16 10:04:47 2008 -0500
+
+    Support for multiple SGMII/TBI interfaces for TSEC ethernet
+
+    Fix TBI PHY accesses to use the proper offset in CPU register space. The
+    previous code would incorrectly access the TBI PHY by reading/writing to CPU
+    register space at the same location as would be used to access external PHYs.
+
+    Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+    Acked-by: Andy Fleming <afleming@freescale.com>
+
+commit 7c803be2eb3cae245dedda438776e08fb122250f
+Author: Wolfgang Denk <wd@denx.de>
+Date:	Tue Sep 16 18:02:19 2008 +0200
+
+    TQM8xx: Fix CFI flash driver support for all TQM8xx based boards
+
+    After switching to using the CFI flash driver, the correct remapping
+    of the flash banks was forgotten.
+
+    Also, some boards were not adapted, and the old legacy flash driver
+    was not removed yet.
+
+    Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit c0d2f87d6c450128b88e73eea715fa3654f65b6c
+Author: Wolfgang Denk <wd@denx.de>
+Date:	Sun Sep 14 00:59:35 2008 +0200
+
+    Prepare v2008.10-rc2
+
+    Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit f12e4549b6fb01cd2654348af95a3c7a6ac161e7
+Author: Wolfgang Denk <wd@denx.de>
+Date:	Sat Sep 13 02:23:05 2008 +0200
+
+    Coding style cleanup, update CHANGELOG
+
+    Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 0c32565f536609d78feef35c88bbc39d3ac53a73
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date:	Wed Sep 10 09:18:34 2008 -0500
+
+    Update mailing list email and archive addresses
+
+    Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit fb661ea444ae61de60520f66ae84cdb5dd5a3246
+Author: u-boot@bugs.denx.de <u-boot@bugs.denx.de>
+Date:	Thu Sep 11 15:40:01 2008 +0200
+
+    85xx: socrates: autoprobe Lime chip
+
+    This patch is an attempt to implement autoprobing for the Lime
+    presence on the bus.
+    Configure GPCM for Lime CS2 and try to access chip ID registers.
+    Second read atempt delivers register values if the chip is present.
+
+    Signed-off-by: Anatolij Gustschin <agust@denx.de>
+
+commit e99b607a5ec56ce66e0bcccb78480d5e16fb7bc5
+Author: u-boot@bugs.denx.de <u-boot@bugs.denx.de>
+Date:	Thu Sep 11 15:40:01 2008 +0200
+
+    85xx: socrates: Add support for new image format.
+
+    Signed-off-by: Detlev Zundel <dzu@denx.de>
+
+commit 3c094b652d4107b34641f300a8e9fe16ca15e3d8
+Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+Date:	Thu Sep 11 17:28:18 2008 +0900
+
+    sh: Fix compile error for r2dplus
+
+    netdev.h was not include by r2dplus.
+
+    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+
+commit 56844a22b76c719e600047e23b80465a44d76abd
+Author: Heiko Schocher <hs@denx.de>
+Date:	Thu Sep 11 08:11:23 2008 +0200
+
+    powerpc: Fix bootm to boot up again with a Ramdisk
+
+    Commit 2a1a2cb6 didnt remove the dummy mem reservation in fdt_chosen,
+    and this stopped Linux from booting with a Ramdisk. This patch fixes
+    this, by deleting the useless dummy mem reservation.
+
+    When booting with a Ramdisk, a fix offset FDT_RAMDISK_OVERHEAD is now
+    added to of_size, so we dont need anymore a dummy mem reservation.
+
+    I measured the value of FDT_RAMDISK_OVERHEAD on a MPC8270 based
+    system (=0x44 bytes) and rounded it up to 0x80).
+
+    Signed-off-by: Heiko Schocher <hs@denx.de>
+    Acked-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit fc9c1727b5b3483ce49c3cb668e8332fb001b8a7
+Author: Luigi 'Comio' Mantellini <luigi.mantellini@idf-hit.com>
+Date:	Mon Sep 8 02:46:13 2008 +0200
+
+    Add support for LZMA uncompression algorithm.
+
+    Signed-off-by: Luigi 'Comio' Mantellini <luigi.mantellini@idf-hit.com>
+    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 0008b6d968160abe2bfd936493f3a516a7c8da20
+Author: Anton Vorontsov <avorontsov@ru.mvista.com>
+Date:	Fri Jun 27 23:04:20 2008 +0400
+
+    fsl_elbc_nand: ecclayout cleanups
+
+    This patch deletes oobavail assignments, they're calculated by the nand
+    core code in nand_scan_tail, plus current oobavail values are wrong for
+    the LP NANDs.
+
+    Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
+    Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
+    Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit 8f42bf1c393d53a70c2545e9f329d11c46d74794
+Author: Anton Vorontsov <avorontsov@ru.mvista.com>
+Date:	Fri Jun 27 23:04:13 2008 +0400
+
+    fsl_elbc_nand: implement support for flash-based BBT
+
+    This patch implements support for flash-based BBT for chips working
+    through ELBC NAND controller, so that NAND core will not have to re-scan
+    for bad blocks on every boot.
+
+    Because ELBC controller may provide HW-generated ECCs we should adjust
+    bbt pattern and bbt version positions in the OOB free area.
+
+    Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
+    Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
+    Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit 97ae023648e764f794ffb9c52da109d6caf09c47
+Author: Anton Vorontsov <avorontsov@ru.mvista.com>
+Date:	Fri Jun 27 23:04:04 2008 +0400
+
+    fsl_elbc_nand: fix OOB workability for large page NAND chips
+
+    For large page chips, nand_bbt is looking into OOB area, and checking
+    for "0xff 0xff" pattern at OOB offset 0. That is, two bytes should be
+    reserved for bbt means.
+
+    But ELBC driver is specifying ecclayout so that oobfree area starts at
+    offset 1, so only one byte left for the bbt purposes.
+
+    This causes problems with any OOB users, namely JFFS2: after first mount
+    JFFS2 will fill all OOBs with "erased marker", so OOBs will contain:
+
+      OOB Data: ff 19 85 20 03 00 ff ff ff 00 00 08 ff ff ff ff
+      OOB Data: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
+      OOB Data: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
+      OOB Data: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
+
+    And on the next boot, NAND core will rescan for bad blocks, then will
+    see "0xff 0x19" pattern, and will mark all blocks as bad ones.
+
+    To fix the issue we should implement our own bad block pattern: just one
+    byte at OOB start. Though, this will work only for x8 chips. For x16
+    chips two bytes must be checked. Since ELBC driver does not support x16
+    NANDs (yet), we're safe for now.
+
+    Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
+    Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
+    Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit 7238ada313057a85409485b8ee21515dc10c07a5
+Author: Wolfgang Denk <wd@denx.de>
+Date:	Fri Sep 12 13:52:21 2008 +0200
+
+    MPC512x: reduce timeout waiting for Ethernet autonegotiation to 2.5s
+
+    Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit b18410e508a12ba0a177dfc2a386857c806fa96d
+Author: Stefan Roese <sr@denx.de>
+Date:	Thu Sep 11 13:05:56 2008 +0200
+
+    ppc4xx: Enable device tree (FDT) support in zeus board port
+
+    Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 7bf5ecfa50722a9feb45ea8f04da75f5d406f20b
+Author: Stefan Roese <sr@denx.de>
+Date:	Wed Sep 10 16:53:47 2008 +0200
+
+    ppc4xx: Fix SDRAM inititialization of multiple 405 based board ports
+
+    This patch fixes a problem introdiced with patch
+    bbeff30c [ppc4xx: Remove superfluous dram_init() call or replace it by
+    initdram()].
+
+    The boards affected are:
+    - PCI405
+    - PPChameleonEVB
+    - quad100hd
+    - taihu
+    - zeus
+
+    Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 61737c59a3285f6fadf96a5836879898c04ec28d
+Author: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
+Date:	Thu Sep 11 19:41:26 2008 -0400
+
+    ppc4xx: Add .gitignore file to xilinx-ppc440 boards
+
+    Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
+    Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 2bec498ed1164a58cd8437b561bdc4551d69f9bf
+Author: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
+Date:	Thu Sep 11 19:41:25 2008 -0400
+
+    ppc4xx: Fix compilation of v5fx30teval_flash
+
+    Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
+    Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 4bed9deebbd7ee6f0ba746b44d47a922156f7404
+Author: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
+Date:	Wed Sep 10 17:44:30 2008 -0400
+
+    ppc4xx: Fix in-tree build for ppc440-generic boards
+
+    Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
+    Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 06c4ab50f5ccfb55ea2dd324aa28b2b06102e416
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date:	Fri Sep 12 02:20:47 2008 +0200
+
+    ARM: synchronize mach-types.h with linux 2.6.27-rc6
+
+    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 3ee9f03f588ad605e3fd10530237f9e3e2e7ab4c
+Author: Jens Scharsig <esw@bus-elektronik.de>
+Date:	Fri Sep 12 02:20:47 2008 +0200
+
+    at91rm9200: fix errors with CONFIG_CMD_I2C_TREE
+
+    This patch prevents linker error on AT91RM9200 boards, if
+    CONFIG_CMD_I2_TREE is set.
+    It implements i2c_set_bus_speed and i2c_get_bus_speed as a dummy function.
+
+    Signed-off-by: Jens Scharsig <esw@bus-elektronik.de>
+
+commit b5b0344957d32e3d07a8dd72fce64fb48e680ba4
+Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
+Date:	Fri Sep 12 02:20:47 2008 +0200
+
+    ARM DaVinci: Remove duplicate code in cpu/arm926ejs/davinci/dp83848.c
+
+    ARM DaVinci: Remove duplicate code in cpu/arm926ejs/davinci/dp83848.c
+
+    Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
+
+commit 03db53335c8eba656a7c44d1555b1a4514383e33
+Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+Date:	Fri Sep 12 02:20:46 2008 +0200
+
+    make: Remove redundant __ARM__ addition when cross-compiling on *BSD
+
+    __ARM__ is given by arm_config.mk automatically.
+
+    Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+
+commit 8cc62a7d9c77f8ef5166fb57322c4a6ddac320b4
+Author: Claudio Scordino <claudio@evidence.eu.com>
+Date:	Fri Sep 12 02:20:46 2008 +0200
+
+    Fix MACH_TYPE for the AT91RM9200DK board.
+
+    Signed-off-by: Claudio Scordino <claudio@evidence.eu.com>
+
+commit 274737e5eb25b2bcd3af3a96da923effd543284f
+Author: Andrew Dyer <adyer@righthandtech.com>
+Date:	Fri Sep 12 02:20:46 2008 +0200
+
+    i.mx change get_timer(base) to return time since base
+
+    This patch changes get_timer() for i.MX to return the time since
+    'base' instead of the time since the counter was at zero.
+
+    Symptom seen is flash timeout errors when erasing or programming a
+    sector using the common cfi flash code.
+
+    Signed-off-by: Andrew Dyer <adyer@righthandtech.com>
+
+commit 48fed40575b3e8eae960eb0141509ddd9a73012a
+Author: Andrew Dyer <adyer@righthandtech.com>
+Date:	Fri Sep 12 02:20:46 2008 +0200
+
+    i.MX use u-boot baud rate and don't assume UART master clock
+
+    1) Change the i.MX serial driver to use the baud rate set in the
+     u-boot environment
+
+    2) don't assume a 16MHz value for PERCLK1 in baud rate calculations
+
+    3) don't write a 1 to the RDR bit in the USR2 reg. (bit is not "write
+     one to clear" like other status bits in the reg.)
+
+    Signed-off-by: Andrew Dyer <adyer@righthandtech.com>
+
+commit 6e1551a870d360805b9d172dc56d935064abe71d
+Author: Andrew Dyer <adyer@righthandtech.com>
+Date:	Fri Sep 12 02:20:46 2008 +0200
+
+    arm920t fix constant error in start.S
+
+    Code in cpu/arm920t/start.S will die with a compilation error if
+    CONFIG_STACKSIZE + CFG_MALLOC_LEN works out to an invalid constant for
+    the ARM sub instruction.  Change the code so that each is subtracted
+    independently to avoid the error.
+
+    Signed-off-by: Andrew Dyer <adyer@righthandtech.com>
+
+commit b23253835f871cd9bd8e955b9a971d18a7d4ff56
+Author: Gururaja Hebbar K R <gururajakr@sanyo.co.in>
+Date:	Fri Sep 12 02:20:40 2008 +0200
+
+    ARM OMAP : Correct Invalid Timer Register Field Declaration in omap1510.h & omap730.h
+
+    - Correct Invalid #define of MPUTIM_PTV_MASK for
+       omap1510 & omap730 register definition
+
+     MPUTIM_PTV_MASK is defined as
+     #define MPUTIM_PTV_MASK		(0x7<<PTV_BIT)
+
+     while it should have been
+     #define MPUTIM_PTV_MASK		(0x7<<MPUTIM_PTV_BIT)
+
+    - Below Patch corrects the same
+
+    Signed-off-by: Gururaja Hebbar <gururajakr@sanyo.co.in>
+
+commit c455d07396dddc9864fd8dbb965ee10fe95ce8cf
+Author: Adrian Filipi <adrian.filipi@eurotech.com>
+Date:	Fri Jul 18 11:52:02 2008 -0400
+
+    Set up SD/MMC OCR as comment describes. i.e. 3.2-3.4v.
+
+    Signed-off-by: Adrian Filipi <adrian.filipi@eurotech.com>
+
+commit eb16135df20535b0d19969f50fb5bd17f95e9c25
+Author: Guennadi Liakhovetski <lg@denx.de>
+Date:	Thu Aug 28 12:25:11 2008 +0200
+
+    i.MX31: document timer precision option
+
+    Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
+
+commit 1a6337b01351b82a45b0defa76f08744511c580b
+Author: Magnus Lilja <lilja.magnus@gmail.com>
+Date:	Fri Aug 29 10:36:18 2008 +0200
+
+    i.MX31: Make the SPI bus and chip select configurable for MC13783
+
+    The i.MX31 has three SPI buses and each bus has several chip selects
+    and the MC13783 chip can be connected to any of these. The current
+    RTC driver for MC13783 is hardcoded for CSPI2/SS2.
+
+    This patch makes make MC13783 SPI bus and chip select configurable
+    via CONFIG_MC13783_SPI_BUS and CONFIG_MC13783_SPI_CS.
+
+    Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com>
+
+commit 8c4ebec25b21e355b8488698ec1594da9701fff4
+Author: Magnus Lilja <lilja.magnus@gmail.com>
+Date:	Fri Aug 29 10:36:17 2008 +0200
+
+    i.MX31: Add reset_timer() and modify get_timer_masked().
+
+    This patch adds the reset_timer() function (needed by nand_base.c) and
+    modifies the get_timer_masked() to work in the same way as the omap24xx
+    function.
+
+    Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com>
+
+commit deeec4991a55de243787002ede24d2331d234fc8
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date:	Wed Sep 10 22:48:09 2008 +0200
+
+    ap325rxa: remove duplicate CONFIG_FLASH_CFI_DRIVER
+
+    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit a3a08c0cedd329edf5256e1d6b2bad0fca002725
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date:	Wed Sep 10 22:48:09 2008 +0200
+
+    bootm arm/avr32/blackfin/microblaze/nios2/sh: remove no more need 'error' label
+
+    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 0e8d158664a913392cb01fb11a948d83f72e105e
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date:	Wed Sep 10 22:48:06 2008 +0200
+
+    rename CFG_ENV macros to CONFIG_ENV
+
+    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 1ede78710c3bf9ad6f4a53aaddc3bcc86fedd9df
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date:	Wed Sep 10 22:48:05 2008 +0200
+
+    nvedit: rename error comment to CONFIG_ENV_IS_IN_
+
+    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit b64b775e7546ed138df360ceb3a71ee358cb9a01
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date:	Wed Sep 10 22:48:05 2008 +0200
+
+    cmd_mem: Move conditional compilation to Makefile
+
+    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 8a40fb148efa442d6526eac46a2001e4c64d28ff
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date:	Wed Sep 10 22:48:05 2008 +0200
+
+    move cmd_get_data_size to command.c
+
+    add CMD_DATA_SIZE macro to enable it
+
+    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 507641d2491980531932b9f25dab37fe5e6c3a1a
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date:	Wed Sep 10 22:48:04 2008 +0200
+
+    env_flash: Move conditional compilation to Makefile
+
+    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 5a1aceb0689e2f731491838970884a673ef7e7d3
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date:	Wed Sep 10 22:48:04 2008 +0200
+
+    rename CFG_ENV_IS_IN_FLASH in CONFIG_ENV_IS_IN_FLASH
+
+    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 7d9b5bae5ba558c7464d89d033aca04acaf01172
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date:	Wed Sep 10 22:48:03 2008 +0200
+
+    cleanup use of CFG_ENV_IS_IN_FLASH
+
+    - #if CFG_ENV_IS_IN_FLASH
+    - #if (CFG_ENV_IS_IN_FLASH == 1)
+    - #define CFG_ENV_IS_IN_FLASH 0
+
+    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 0cf4fd3cf8d0e00605bec5fc56f89c6415015a46
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date:	Wed Sep 10 22:48:01 2008 +0200
+
+    rename environment.c in env_embedded.c to reflect is functionality
+
+    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit c0878af6e32f0fd8e13a6ca315b9add64441115a
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date:	Wed Sep 10 22:48:01 2008 +0200
+
+    env_nowhere: Move conditional compilation to Makefile
+
+    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 93f6d72544da4510a146bc4c93d609b0116cde37
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date:	Wed Sep 10 22:48:00 2008 +0200
+
+    rename CFG_ENV_IS_NOWHERE in CONFIG_ENV_IS_NOWHERE
+
+    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 2556ef78113b5f089dfcac5da90bf31dd568397b
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date:	Wed Sep 10 22:48:00 2008 +0200
+
+    env_sf: Move conditional compilation to Makefile
+
+    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 0b5099a8419bf9c828df5e3e2c6878dc300d98e3
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date:	Wed Sep 10 22:48:00 2008 +0200
+
+    rename CFG_ENV_IS_IN_SPI_FLASH in CONFIG_ENV_IS_IN_SPI_FLASH
+
+    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 55c5f49910ec8225347aa1d211352a84de6649b4
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date:	Wed Sep 10 22:48:00 2008 +0200
+
+    env_onenand: Move conditional compilation to Makefile
+
+    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 9656138ff1a34d4c4768db6b490deffc40ee674b
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date:	Wed Sep 10 22:47:59 2008 +0200
+
+    rename CFG_ENV_IS_IN_ONENAND in CONFIG_ENV_IS_IN_ONENAND
+
+    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 957a0e69575683efd70ace147746bbb3d8e7c501
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date:	Wed Sep 10 22:47:59 2008 +0200
+
+    env_nvram: Move conditional compilation to Makefile
+
+    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 9314cee6917444ab88bd4e758da7a30975120187
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date:	Wed Sep 10 22:47:59 2008 +0200
+
+    rename CFG_ENV_IS_IN_NVRAM in CONFIG_ENV_IS_IN_NVRAM
+
+    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 06f61354397911a4c121dfa51b6ccbf7e300d48b
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date:	Wed Sep 10 22:47:59 2008 +0200
+
+    env_nand: Move conditional compilation to Makefile
+
+    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 51bfee192099206a4397f15f3b93516e01f58ab0
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date:	Wed Sep 10 22:47:58 2008 +0200
+
+    rename CFG_ENV_IS_IN_NAND in CONFIG_ENV_IS_IN_NAND
+
+    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit d8cc04d0ac9c7c0d12454708aaf5489f8532bbf9
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date:	Wed Sep 10 22:47:58 2008 +0200
+
+    env_dataflash: Move conditional compilation to Makefile
+
+    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 057c849c45b9ee19df8ff3acdeee66be52819962
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date:	Wed Sep 10 22:47:58 2008 +0200
+
+    rename CFG_ENV_IS_IN_DATAFLASH in CONFIG_ENV_IS_IN_DATAFLASH
+
+    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit d1034bc8db60fa6bd419328baf6a75cb0645cee8
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date:	Wed Sep 10 22:47:52 2008 +0200
+
+    cmd_eeprom: Move conditional compilation to Makefile
+
+    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit bf5a7710ec70e90e98f451b4ba0eb65f9ffc34eb
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date:	Fri Sep 5 09:19:54 2008 +0200
+
+    env_eeprom: Move conditional compilation to Makefile
+
+    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit bb1f8b4f8bb0bfce52e0faa4637b975b745824b3
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date:	Fri Sep 5 09:19:30 2008 +0200
+
+    rename CFG_ENV_IS_IN_EEPROM in CONFIG_ENV_IS_IN_EEPROM
+
+    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 32628c5008105a732212003d83b75f05e5243bb2
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date:	Sat Aug 30 23:54:58 2008 +0200
+
+    cmd_mac: Move conditional compilation to Makefile
+
+    finish remaning CFG_ID_EEPROM in CONFIG_ID_EEPROM
+    start in commit ad8f8687b78c3e917b173f038926695383c55555
+
+    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit e5648acab153f0f429bfc714902c5aaa7879f71b
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date:	Sat Aug 30 23:47:41 2008 +0200
+
+    cmd_fdc: Move conditional compilation to Makefile
+
+    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 2d02d91d530e831f2dab228085963fc1d5b71cb0
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date:	Sat Aug 30 23:47:38 2008 +0200
+
+    common/Makefile: add core command section
+
+    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 0d92d4a699fb1a39381d98571dc51fb97e5bcf9e
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date:	Sat Aug 30 23:29:57 2008 +0200
+
+    cmd_vfd: Move conditional compilation to Makefile
+
+    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 6644641d072aee3087da129d8443187196a4d8a9
+Author: Scott Wood <scottwood@freescale.com>
+Date:	Wed Sep 10 11:48:49 2008 -0500
+
+    delta, zylonite: Update nand_oobinfo to nand_ecclayout.
+
+    This is part of the switch to newer upstream MTD code.
+
+    Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit 9b05aa788bfdd3264ff1bc9418cb19550a7234e4
+Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
+Date:	Sat Aug 30 17:06:55 2008 -0400
+
+    ARM DaVinci: Fix broken HW ECC for large page NAND.
+
+    Based on original patch by Bernard Blackham <bernard@largestprime.net>
+
+    U-boot's HW ECC support for large page NAND on Davinci is completely
+    broken.  Some kernels, such as the 2.6.10 one supported by
+    MontaVista for DaVinci, rely upon this broken behaviour as they
+    share the same code for ECCs. In the existing scheme, error
+    detection *might* work on large page, but error correction
+    definitely does not.  Small page ECC correction works, but the
+    format is not compatible with the mainline git kernel.
+
+    This patch adds ECC code that matches what is currently in the
+    Davinci git repository (since NAND support was added in 2.6.24).
+    This makes the ECC and OOB layout written by u-boot compatible with
+    Linux for both small page and large page devices and fixes ECC
+    correction for large page devices.
+
+    The old behaviour can be restored by defining the macro
+    CFG_DAVINCI_BROKEN_ECC, which is undefined by default.
+
+    Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
+    Acked-by: Sergey Kubushyn <ksi@koi8.net>
+    Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit 0b7c5639891f4103a0e31ec7ae0beb3e97ed3836
+Author: Heiko Schocher <hs@denx.de>
+Date:	Wed Sep 10 11:15:28 2008 +0200
+
+    muas3001: update BR4 settings
+
+    Also set up the port pins for using I2C.
+
+    Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit 3591293509e0c0bcf244b0f974775bff2e25697e
+Author: Petri Lehtinen <petri.lehtinen@inoi.fi>
+Date:	Wed Sep 10 09:43:49 2008 +0300
+
+    autoscr: Fix one-character lines and non-newline terminated scripts
+
+    When not using hush, the autoscr command now executes lines that are
+    only one character long. It also runs the last line of scripts even if
+    it does not end in a newline.
+
+    Signed-off-by: Petri Lehtinen <petri.lehtinen@inoi.fi>
+
+commit 9ebbb54f7a25055010fa6668eba40c72a4c4f985
+Author: Victor Gallardo <vgallardo@amcc.com>
+Date:	Tue Sep 9 15:13:29 2008 -0700
+
+    ppc4xx: Allow DTT_I2C_DEV_CODE configured by CFG_I2C_DTT_ADDR
+
+    On AMCC Arches board DTT_I2C_DEV_CODE is different then canyonlands
+    and glacier.
+
+    Signed-off-by: Victor Gallardo <vgallardo@amcc.com>
+
+commit 245f6ef3e11828cb46188e396fb1e67f7b07cd03
+Author: Heiko Schocher <hs@denx.de>
+Date:	Mon Sep 8 10:21:11 2008 +0200
+
+    muas3001: added support for the LM75 sensor.
+
+    Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit 4a02a2dca82aeab8f839db9dd35fda9d5412dacb
+Author: Heiko Schocher <hs@denx.de>
+Date:	Mon Sep 8 10:20:19 2008 +0200
+
+    muas3001: activate WDT for the muas3001 board.
+
+    Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit a55d074dac24dc941f1afb5b4e94b1509bfdda4e
+Author: Heiko Schocher <hs@denx.de>
+Date:	Mon Sep 8 10:19:36 2008 +0200
+
+    muas3001: added 64MB SDRAM autodetection.
+
+    Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit 5251469943895de4bb9a04d5053352cc22acb7d5
+Author: Andrew Klossner <andrew@cesa.opbu.xerox.com>
+Date:	Thu Aug 21 07:12:26 2008 -0700
+
+    Fix printf errors under -DDEBUG
+
+    Fix printf format-string/arg mismatches under -DDEBUG.
+
+    These warnings occur with DEBUG defined for a platform using
+    cpu/mpc85xx.  Users of other architectures can unearth similar
+    problems by adding the line "CFLAGS += -DDEBUG=1" in config.mk right
+    after "CFLAGS += $(call cc-option,-fno-stack-protector)".
+
+    Signed-off-by: Andrew Klossner <andrew@cesa.opbu.xerox.com>
+    Signed-off-by: Andy Fleming <afleming@freescale.com>
+
+commit 8b9e4787641719d709bfa2ebeb72e8bd4952bee7
+Author: Wolfgang Denk <wd@denx.de>
+Date:	Tue Sep 9 23:55:18 2008 +0200
+
+    Update CHANGELOG, prepare 2008-10-rc1 release
+
+    Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit e0ff3d350d6b7960deb5a881dfc5acf3a63ef676
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date:	Mon Sep 8 08:51:29 2008 -0500
+
+    85xx: Ensure timebase is zero on secondary cores
+
+    The e500um says the timebase is volatile out of reset.  To ensure
+    TB sync works we need to make sure its zero.
+
+    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 54b4ab3c961a2012a1c2a09c259a6343323ec551
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date:	Tue Sep 9 22:18:24 2008 +0200
+
+    bootm_load_os: fix load_end debug message
+
+    print load_end value not pointer
+
+    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 1d9af0be764960e6cc1c093e97176c3542796820
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date:	Tue Sep 9 22:18:23 2008 +0200
+
+    bootm: enable fdt support only on ppc, m68k and sparc
+
+    ...as done in image.c
+
+    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 748b5274e76f81df85cfcffaffedc323678d0623
+Author: Markus Heidelberg <markus.heidelberg@web.de>
+Date:	Tue Sep 9 18:51:05 2008 +0200
+
+    common/cmd_mem.c: remove nested #if defined(CONFIG_CMD_MEMORY)
+
+    Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de>
+
+commit 650632fe4ca09cfd0e5e6a593f2efc02ef87a58c
+Author: Markus Heidelberg <markus.heidelberg@web.de>
+Date:	Tue Sep 9 17:31:46 2008 +0200
+
+    gitignore: add tags files and Vim swap file
+
+    Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de>
+
+commit 1d9b67b23fca6a25154333733204339802510720
+Author: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
+Date:	Tue Sep 9 17:52:47 2008 +0900
+
+    add board_eth_init() for sh7785lcr board
+
+    Fix the problem that cannot work RTL8169 on sh7785lcr board.
+
+    Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
+
+commit 7b7a869a8ba3bd6d9bffb748c91232141330f514
+Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+Date:	Wed Aug 6 16:08:41 2008 -0500
+
+    mtd: SPI Flash: Support the STMicro Flash
+
+    Add MTD SPI Flash support for M25P16, M25P20, M25P32,
+    M25P40, M25P64, M25P80, M25P128.
+
+    Signed-off-by: Jason McMullan <mcmullan@netapp.com>
+    Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+
+commit 4bc07c368076560ed7fa4c9f987c71a8521488a9
+Author: Wolfgang Denk <wd@denx.de>
+Date:	Tue Sep 9 17:55:31 2008 +0200
+
+    trab: fix build problem after change to use do_div()
+
+    We must link with libgeneric now.
+
+    Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 3b20fd83c73c22acfcb0c6663be747bd5c8b7011
+Author: Ryan CHEN <ryan.chen@st.com>
+Date:	Wed Aug 20 13:00:17 2008 -0400
+
+    Correct drv_usb_kbd_init function
+
+    The patch is that check if usb_get_dev_index() function return valid
+    pointer. If valid, continue. Otherwise return -1.
+
+    Signed-off-by: Ryan Chen <ryan.chen@st.com>
+    Acked-by: Markus Klotzbuecher <mk@denx.de>
+
+commit eba1f2fc75f128a9a6c1328d786996a93fd7a707
+Author: Remy Bohmer <linux@bohmer.net>
+Date:	Wed Aug 20 11:22:02 2008 +0200
+
+    Make usb-stop() safe to call multiple times in a row.
+
+    A recent commit (936897d4d1365452bbbdf8430db5e7769ef08d38)
+    enabled the usb_stop() command in common/cmd_bootm.c which was
+    not enabled for some time, because no board did actually set the
+    CFG_CMD_USB flag. So, now the usb_stop() is executed before
+    loading the linux kernel.
+
+    However, the usb_ohci driver hangs up (at least on AT91SAM) if the
+    driver is stopped twice (e.g. the peripheral clock is stopped on AT91).
+    If some other piece of code calls usb_stop() before the bootm command,
+    this command will hangup the system during boot.
+    (usb start and stop is typically used while booting from usb memory stick)
+
+    But, stopping the usb stack twice is useless anyway, and a flag already
+    existed that kept track on the usb_init()/usb_stop() calls.
+    So, we now check if the usb stack is really started before we stop it.
+
+    This problem is now fixed in both the upper as low-level layer.
+
+    Signed-off-by: Remy Bohmer <linux@bohmer.net>
+    Acked-by: Markus Klotzbuecher <mk@denx.de>
+
+commit 2c8ccf2728f5e67d991cecf76c4057db75a87b67
+Author: Wolfgang Denk <wd@denx.de>
+Date:	Tue Sep 9 16:55:47 2008 +0200
+
+    Makefile: fix bug introduced by commit 47ffd6c2
+
+commit 880f6a5d7596f42db5ff8803b797b78ec5b146e0
+Author: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
+Date:	Tue Sep 9 10:00:33 2008 -0400
+
+    ppc4xx: ppc440-generic-ALL: Fix out of tree build v2
+
+    This patch solves the problems compiling ml507, v5fx30teval and
+    ppc440-generic out of tree.
+
+    Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
+
+commit 47bebe34ca4e33bab0e822e4ceebbec2590ccbcb
+Author: Nícolas Carneiro Lebedenco <nicolas.lebedenco@tasksistemas.com.br>
+Date:	Thu Sep 4 15:35:46 2008 -0300
+
+    Fix dev_print when called from usb_stor_info (usb storage command)
+
+    Fix output of the usb storage command. It was printing "Device 0: not
+    available" because IF_TYPE_USB was not included into the switch
+    statement.
+
+    Signed-off-by: Nicolas Lebedenco <nicolas.lebedenco@tasksistemas.com.br>
+
+commit a4f243452cc8ce0c2c9b51a2520db4bde5f472de
+Author: Bartlomiej Sieka <tur@semihalf.com>
+Date:	Tue Sep 9 12:58:16 2008 +0200
+
+    FIT: make iminfo check hashes of all images in FIT, return 1 on failed check
+
+    Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
+
+commit 919f550dc11a13abf01c6bc713c968de790b8d7c
+Author: Bartlomiej Sieka <tur@semihalf.com>
+Date:	Tue Sep 9 12:58:15 2008 +0200
+
+    FIT: add ability to check hashes of all images in FIT, improve output
+
+    - add function fit_all_image_check_hashes() that verifies if all
+      hashes of all images in the FIT are valid
+    - improve output of fit_image_check_hashes() when the hash check fails
+
+    Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
+
+commit 1de1fa408967cef6804bb046b904114519bb36f0
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date:	Mon Sep 8 20:54:39 2008 +0200
+
+    qemu_mips: Update linux bootm to support dynamic cmdline
+
+    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit f5ed9e39088ecfa5a5f3ef47b08e5bda7890d764
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date:	Mon Sep 8 14:56:49 2008 -0500
+
+    Add support for booting of INTEGRITY operating system uImages
+
+    Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit 72f1b65f1b68bc6ed0d182eda1f3d6cf51b6414a
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date:	Mon Sep 8 21:01:29 2008 +0200
+
+    mips/bootm: Fix typo in commit c4f9419c, "initrd_start" replaced by "images->rd_start"
+
+    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 9ba2e2c8191353d75b2d535e672a125be7b84c03
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date:	Mon Sep 8 13:57:12 2008 -0500
+
+    Remove support for booting ARTOS images
+
+    Pantelis Antoniou stated:
+	AFAIK, it is still used but the products using PPC are long gone.
+	Nuke it plz (from orbit).
+
+    So remove it since it cleans up a usage of env_get_char outside of
+    the environment code.
+
+    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 47ffd6c2fc72b46daa9d5d59eedb894fab2b7ee1
+Author: Wolfgang Denk <wd@denx.de>
+Date:	Tue Sep 9 15:45:18 2008 +0200
+
+    Makefile: compile and link each module just once
+
+    Several source files need to be compiled and linked when one or more
+    config options are selected. To allow for easy selection in the
+    Makefiles yet to avoild multiple compilation (which costs build time)
+    and especially multiple linking (which causes errors), we use
+    "COBJS = $(sort COBJS-y)" which eliminates duplicates.
+
+    By courtesy of Detlev Zundel who suggested this approach.
+
+    Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 48d0192fe869948fef14b460b5f0c85bca933693
+Author: Andreas Engel <andreas.engel@ericsson.com>
+Date:	Mon Sep 8 14:30:53 2008 +0200
+
+    Moved conditional compile into Makefile
+
+    Signed-off-by: Andreas Engel <andreas.engel@ericsson.com>
+
+commit 20c9226cb8cab08a111ee73db04e62d943ee0c97
+Author: Andreas Engel <andreas.engel@ericsson.com>
+Date:	Mon Sep 8 10:17:31 2008 +0200
+
+    Merged serial_pl010.c and serial_pl011.c.
+
+    They only differ in the init function.
+    This also adds the missing watchdog support for the PL011.
+
+    Signed-off-by: Andreas Engel <andreas.engel@ericsson.com>
+
+commit 0817d688f307ee2c0598e79175c94a40ce90337b
+Author: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
+Date:	Sun Sep 7 17:10:27 2008 -0400
+
+    Remove gap fill in srec object v2
+
+    SREC files do not need gap fill: The load address is specified in the
+    file. On the other hand, it can't be avoided in a .bin object. It has
+    no information about memory location.
+
+    Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
+
+commit 1dc306931ca5ce87f13916fa7165b052d3aa714f
+Author: Markus Heidelberg <markus.heidelberg@web.de>
+Date:	Sun Sep 7 20:18:27 2008 +0200
+
+    README: fix missing subdirectory in the documentation
+
+    Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de>
+
+commit 3ef96ded38a8d33b58b9fab9cd879d51ddac4cbd
+Author: Graeme Russ <graeme.russ@gmail.com>
+Date:	Sun Sep 7 07:08:42 2008 +1000
+
+    Update i386 code (sc520_cdp)
+
+    Attempt to bring i386 / sc520 inline with master
+
+    Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
+
+commit 5608692104efa8d56df803dc79ea41ac3607eee5
+Author: Guennadi Liakhovetski <lg@denx.de>
+Date:	Thu Sep 4 13:01:49 2008 +0200
+
+    fw_env: add NAND support
+
+    Add support for environment in NAND with automatic NOR / NAND recognition,
+    including unaligned environment, bad-block skipping, redundant environment
+    copy.
+
+    Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
+
+commit dd794323a2a1ed6a8a5df51785c31bcde60ad7ca
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date:	Tue Sep 9 09:50:24 2008 +0200
+
+    ppc4xx: Fix out-of-tree building of CPCI405 variants
+
+    Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+    Acked-by: Stefan Roese <sr@denx.de>
+
+commit 59f630588e3fdbd698a0a2798e52a8924e899563
+Author: Sergei Poselenov <sposelenov@emcraft.com>
+Date:	Fri Aug 15 15:42:11 2008 +0200
+
+    Removed hardcoded MxMR loop value from upmconfig() for MPC85xx.
+
+    Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
+
+commit e64987a892353f3d49eb242d997820ef8f538912
+Author: Anatolij Gustschin <agust@denx.de>
+Date:	Fri Aug 15 15:42:13 2008 +0200
+
+    85xx: socrates: Enable Lime support.
+
+    This patch adds Lime GDC support together with support for the PWM
+    backlight control through the w83782d chip.  The reset pin of the
+    latter is attached to GPIO, so we need to reset it in
+    early_board_init_r.
+
+    Signed-off-by: Anatolij Gustschin <agust@denx.de>
+
+commit 3e79b588b5199f35016f178fc0d5d1266382097f
+Author: Detlev Zundel <dzu@denx.de>
+Date:	Fri Aug 15 15:42:12 2008 +0200
+
+    85xx: Socrates: Major code update.
+
+    - Update the local bus ranges in the FDT for Linux for the various
+      devices connected to the local bus via chip-select.
+
+    - Set the LCRR_DBYP bit in the LCRR for local bus frequencies
+      lower than 66 MHz and uses I/O accessor functions consequently.
+
+    - UPM data update.
+
+    - Update of default environment and configuration.	Use I2C multibus
+      as we do have two I2C buses.  Also enable sdram and ext2 commands.
+
+    Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
+    Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
+    Signed-off-by: Detlev Zundel <dzu@denx.de>
+
+commit e8d18541c6ceab821f75faab031740b33fdbfa4b
+Author: Timur Tabi <timur@freescale.com>
+Date:	Fri Jul 18 16:52:23 2008 +0200
+
+    Update Freescale 85xx boards to sys_eeprom.c
+
+    The new sys_eeprom.c supports both the old CCID EEPROM format and the new NXID
+    format, and so it obsoletes board/freescale/common/cds_eeprom.c.  Freescale
+    86xx boards already use sys_eeprom.c, so this patch migrates the remaining
+    Freescale 85xx boards to use it as well.  cds_eeprom.c is deleted.
+
+    Signed-off-by: Timur Tabi <timur@freescale.com>
+
+commit aab2bf0202c86227e3dcc8a5b58946087ebcc1af
+Author: Wolfgang Denk <wd@denx.de>
+Date:	Tue Sep 9 10:08:02 2008 +0200
+
+    lib_ppc/interrupts.c: make board_show_activity() a weak function
+
+    This allows to use show_activity() without having to
+    define an empty board_show_activity() function.
+
+    Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit fe876787f8743883ce58fed61525eaa2f34da4c5
+Author: Wolfgang Denk <wd@denx.de>
+Date:	Tue Sep 9 10:06:44 2008 +0200
+
+    stxxtc: remove empty CONFIG_SHOW_ACTIVITY functions
+
+    Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 965de106ba8900372c8b16dc60d5acab7f925e38
+Author: Wolfgang Denk <wd@denx.de>
+Date:	Tue Sep 9 10:03:47 2008 +0200
+
+    NETTA2: remove empty CONFIG_SHOW_ACTIVITY functions
+
+    Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 6cc64f9b5f69239c8b1969572b5a3a4aab7de5b9
+Author: Sergei Poselenov <sposelenov@emcraft.com>
+Date:	Fri Aug 15 15:42:11 2008 +0200
+
+    Removed hardcoded MxMR loop value from upmconfig() for MPC85xx.
+
+    Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
+
+commit 36241ca29d4804a1006fb3f26069effda5202581
+Author: Anatolij Gustschin <agust@denx.de>
+Date:	Fri Aug 15 15:42:13 2008 +0200
+
+    85xx: socrates: Enable Lime support.
+
+    This patch adds Lime GDC support together with support for the PWM
+    backlight control through the w83782d chip.  The reset pin of the
+    latter is attached to GPIO, so we need to reset it in
+    early_board_init_r.
+
+    Signed-off-by: Anatolij Gustschin <agust@denx.de>
+
+commit 7a47753ddcaebbf2142809842f70c5f723bd9ddb
+Author: Detlev Zundel <dzu@denx.de>
+Date:	Fri Aug 15 15:42:12 2008 +0200
+
+    85xx: Socrates: Major code update.
+
+    - Update the local bus ranges in the FDT for Linux for the various
+      devices connected to the local bus via chip-select.
+
+    - Set the LCRR_DBYP bit in the LCRR for local bus frequencies
+      lower than 66 MHz and uses I/O accessor functions consequently.
+
+    - UPM data update.
+
+    - Update of default environment and configuration.	Use I2C multibus
+      as we do have two I2C buses.  Also enable sdram and ext2 commands.
+
+    Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
+    Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
+    Signed-off-by: Detlev Zundel <dzu@denx.de>
+
+commit 4d2ae70e8c31c22e5710df5ff236b5565ea2cf2c
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date:	Tue Sep 9 01:22:39 2008 +0200
+
+    disk-on-chip: remove duplicate doc_probe declaration
+
+    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 3221b074a0ab199f6ae47c19cc22f42ddf3ef819
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date:	Tue Sep 9 00:59:40 2008 +0200
+
+    onenand_uboot: fix warning: 'struct mtd_oob_ops' declared inside parameter list
+
+    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 13b4db0e2107175a8622ebb48529fa3ad8e12c75
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date:	Tue Sep 9 00:59:39 2008 +0200
+
+    rs5c372: fix rtc_set prototype
+
+    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 1bb8b2ef2722bbaea3cc5d46321ce1d99f9b56f7
+Author: Sergei Poselenov <sposelenov@emcraft.com>
+Date:	Thu Aug 14 14:08:28 2008 +0200
+
+    ARM: fix warning: target CPU does not support interworking
+
+    This patch fixes warnings like this:
+
+    start.S:0: warning: target CPU does not support interworking
+
+    which come from some ARM cross compilers and are caused by hard-coded
+    (with "--with-cpu=arm9" configuration option) ARM targets (which
+    support ARM Thumb instructions), while the ARM target selected from
+    the command line (with "-march=armv4") doesn't support Thumb
+    instructions.
+
+    This warning is issued by the compiler regardless of the real use of
+    the Thumb instructions in code.
+
+    To fix this problem, we use options according to compiler version
+    being used.
+
+    Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
+    Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 4265c35fbcb248e58179007621d61d32d0b3b82a
+Author: Sergei Poselenov <sposelenov@emcraft.com>
+Date:	Thu Aug 14 14:08:28 2008 +0200
+
+    ARM: Use do_div() instead of division for "long long".
+
+    Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
+    Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 8febd13c69cb68652577d1a9fcbde954bf784155
+Author: Timur Tabi <timur@freescale.com>
+Date:	Fri Jul 18 16:52:23 2008 +0200
+
+    Update Freescale 85xx boards to sys_eeprom.c
+
+    The new sys_eeprom.c supports both the old CCID EEPROM format and the new NXID
+    format, and so it obsoletes board/freescale/common/cds_eeprom.c.  Freescale
+    86xx boards already use sys_eeprom.c, so this patch migrates the remaining
+    Freescale 85xx boards to use it as well.  cds_eeprom.c is deleted.
+
+    Signed-off-by: Timur Tabi <timur@freescale.com>
+
+commit 1055171ed05b7c4885737463d52b8d6c013bcb5d
+Author: Wolfgang Denk <wd@denx.de>
+Date:	Mon Sep 8 23:26:22 2008 +0200
+
+    lib_arm/bootm.c: fix compile warnings
+
+    bootm.c:128: warning: label 'error' defined but not used
+    bootm.c:65: warning: unused variable 'ret'
+
+    Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 2e3c867d0a63c563a51e65b776973b008f16cec5
+Author: Wolfgang Denk <wd@denx.de>
+Date:	Mon Sep 8 22:46:42 2008 +0200
+
+    ml507: fix out of tree build problem
+
+    Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 9863a15a98f23b79f34a0e4f9e465bc6df5d504d
+Author: Wolfgang Denk <wd@denx.de>
+Date:	Mon Sep 8 22:10:28 2008 +0200
+
+    common/cmd_bootm.c: fix printf() format warnings
+
+    Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 4394f9a8c42bb1b0abc4fc04bd582d4db5f8b726
+Author: Wolfgang Denk <wd@denx.de>
+Date:	Mon Sep 8 22:37:45 2008 +0200
+
+    BMW, PCIPPC2, PCIPPC6, RBC82: fix compile warnings
+
+    missing doc_probe() prototype.
+
+    Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 2c5e3cc4994897d364b148942ff23e47783198f6
+Author: Wolfgang Denk <wd@denx.de>
+Date:	Mon Sep 8 21:28:14 2008 +0200
+
+    mk48t59: fix compile problem introduced by commit d1e23194
+
+    Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 5ff889349d2ace13f10c9335e09365fcec8247cc
+Author: Stefan Roese <sr@denx.de>
+Date:	Mon Sep 8 14:11:12 2008 +0200
+
+    ppc4xx: Move ppc4xx specific prototypes to ppc4xx header
+
+    This patch moves some 4xx specific prototypes out of include common.h
+    to a ppc4xx specific header.
+
+    Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit ac53ee8318678190bf3c68da477a84a657d86fb0
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date:	Fri Sep 5 15:34:04 2008 +0200
+
+    ppc4xx: Update CPCI405(AB) configuration
+
+    This patch add FDT support and command line editing capabilities
+    for CPCI405 and CPCI405AB boards.
+
+    Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+    Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 7b1fbcadf73a83b3beb94abccda1c35e2c075a94
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date:	Fri Sep 5 15:34:03 2008 +0200
+
+    ppc4xx: Cleanup CPCI405 linker script
+
+    Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+    Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 767f9159c5c94cd0cb3135b5b82814ad12816ddf
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date:	Fri Sep 5 15:34:02 2008 +0200
+
+    ppc4xx: Update CPCI405 variants handling
+
+    This patch replaces the BOARD_REVISION variable in include/config.mk
+    by a using a temporary include file in the platform directory.
+
+    The former way does not work anymore and the latter is also used by
+    some other boards.
+
+    Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+    Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit f071f01fd09e9bf1cf09de37a7416aacce71bae1
+Author: Stefan Roese <sr@denx.de>
+Date:	Mon Sep 8 10:01:48 2008 +0200
+
+    ppc4xx: Remove CONFIG_CS8952_PHY define
+
+    Since this define is only used on one board that was never really in
+    production, removing this compile time option doesn't hurt and makes
+    the code more readable.
+
+    Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 6ca8646c1860bba74326bf916a5a3389a5c0d3b5
+Author: Stefan Roese <sr@denx.de>
+Date:	Fri Sep 5 14:11:40 2008 +0200
+
+    ppc4xx: Fix compilation warning for PIP405
+
+    This patch fixes a compilation warning for the PIP405 board. It moves the
+    #ifndef CONFIG_CS8952_PHY define a little so that the warning doesn't
+    occur anymore. I am a little unsure if this #ifdef is at the correct
+    place now or if it could be removed completely. This needs to get
+    tested on the PIP405 board.
+
+    Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 725b53ac61f4df3026b8f6489ef0080fd27d3816
+Author: Stefan Roese <sr@denx.de>
+Date:	Fri Sep 5 14:09:09 2008 +0200
+
+    ppc4xx: Fix compilation warning for canyonlands & glacier
+
+    Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 302e52e0b1d4c7f994991709d0cb6c3ea612cdb5
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date:	Fri Sep 5 14:40:29 2008 -0500
+
+    Fix compiler warning in mpc8xxx ddr code
+
+    ctrl_regs.c: In function 'compute_fsl_memctl_config_regs':
+    ctrl_regs.c:523: warning: 'caslat' may be used uninitialized in this function
+    ctrl_regs.c:523: note: 'caslat' was declared here
+
+    Add a warning in DDR1 case if cas_latency isn't a value we know about.
+
+    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+    Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit d1e2319414ea5218ba801163e4530ecf2dfcbf36
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date:	Mon Sep 1 23:06:23 2008 +0200
+
+    rtc: allow rtc_set to return an error and use it in cmd_date
+
+    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit ee9536a28cb149bcb6c5dee9d08c62c91f4c72d2
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date:	Mon Sep 1 01:16:33 2008 +0200
+
+    ap325rxa/favr-32-ezkit: Use CONFIG_FLASH_CFI_DRIVER
+
+    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 6b971c73f182248ce103503d74fbc0100bb8c8b7
+Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+Date:	Sun Aug 31 05:37:04 2008 +0900
+
+    config.mk: Move arch-specific condition to $(ARCH)_config.mk
+
+    Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+
+commit ea86b9e64b811753d9eabe0f560ee189fbe5d0c1
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date:	Fri Aug 29 19:08:29 2008 -0500
+
+    Prevent crash if random/invalid ramdisks are passed to bootm
+
+    Adds returning an error from the ramdisk detection code if
+    its not a real ramdisk (invalid).  There is no reason we can't
+    just return back to the console if we detect an invalid
+    ramdisk or CRC error.
+
+    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 8e02494e8f86c8f2d7324b5eb9e75271104a01ef
+Author: Anatolij Gustschin <agust@denx.de>
+Date:	Fri Aug 29 21:04:45 2008 +0200
+
+    Prevent crash if random DTB address is passed to bootm
+
+    This patch adds bootm_start() return value check. If
+    error status is returned, we do not proceed further to
+    prevent board reset or crash as we still can recover
+    at this point.
+
+    Signed-off-by: Anatolij Gustschin <agust@denx.de>
+
+commit cc347801add2689b1ee54d21f62bc14ecf6e1dd8
+Author: Andrew Dyer <adyer@righthandtech.com>
+Date:	Fri Aug 29 12:30:39 2008 -0500
+
+    clean up some #if !defined() in drivers/video/cfb_console.c
+
+    rearrange some #if !defined() / #else / #endif statements to remove
+    the negative logic.
+
+    Signed-off-by: Andrew Dyer <adyer@righthandtech.com>
+
+commit c83f4c2d77f07174dcd6bef7e87a0f7017be7c33
+Author: Kyungmin Park <kmpark@infradead.org>
+Date:	Fri Aug 29 09:02:20 2008 +0900
+
+    apollon: use the last memory area for u-boot
+
+    Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
+
+commit a6f2e455b774d0c5d56e44e5661df9adb69b6e07
+Author: Heiko Schocher <hs@denx.de>
+Date:	Thu Aug 28 13:50:42 2008 +0200
+
+    TQM8272: move NAND part in seperate File
+
+    I didn't try to use drivers/mtd/nand/fsl_upm.c for the NAND driver,
+    because I have no longer access to the hardware.
+
+    Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit 584f979f7ee914e32d408739cbdd2c4457ec18b8
+Author: Heiko Schocher <hs@denx.de>
+Date:	Thu Aug 28 13:48:36 2008 +0200
+
+    TQM8272: Fix compiling error for the TQM8272 board.
+
+    Fix compile problems caused by
+    commit  cfa460adfdefcc30d104e1a9ee44994ee349bb7b
+
+    Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit 1a7f8ccec981648ccd38fca2535490582eee08e6
+Author: Kyungmin Park <kmpark@infradead.org>
+Date:	Wed Aug 27 14:45:20 2008 +0900
+
+    Add JFFS2 command support on OneNAND
+
+    Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
+
+commit f5c3ba79788b0e39baab7026d374fe375dd1a43f
+Author: Mark Jackson <mpfj@mimc.co.uk>
+Date:	Mon Aug 25 19:21:30 2008 +0100
+
+    Allow console input to be disabled
+
+    Added new CONFIG_DISABLE_CONSOLE define and GD_FLG_DISABLE_CONSOLE.
+
+    When CONFIG_DISABLE_CONSOLE is defined, setting
+    GD_FLG_DISABLE_CONSOLE disables all console input and output.
+
+    Signed-off-by: Mark Jackson <mpfj@mimc.co.uk>
+
+commit 2b22d608f370565c87f55928b524207031419c11
+Author: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
+Date:	Wed Jul 30 12:39:29 2008 +0200
+
+    loads: allow negative offsets
+
+    Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
+
+commit e90fb6afab2c0c074dfb67bacb4de179eb188a24
+Author: Yuri Tikhonov <yur@emcraft.com>
+Date:	Thu Sep 4 11:19:05 2008 +0200
+
+    USB EHCI: reset root hub
+
+    Some of multi-function USB controllers (e.g. ISP1562) allow root hub
+    resetting only via EHCI registers. So, this patch adds the
+    corresponding kind of reset to OHCI's hc_reset() if the newly
+    introduced CONFIG_PCI_EHCI_DEVNO option is set (e.g. for Socrates
+    board).
+
+    Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
+    Acked-by: Markus Klotzbuecher <mk@denx.de>
+
+commit 5875d358f025c1b042d8a0f08384b756de7256c9
+Author: Yuri Tikhonov <yur@emcraft.com>
+Date:	Fri Aug 15 15:42:09 2008 +0200
+
+    RX 8025 RTC: analyze 12/24-hour mode flag in rtc_get().
+
+    Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
+
+commit 3e3c026ed746a284c6f0ef139b26d859939de7e9
+Author: Stefan Roese <sr@denx.de>
+Date:	Fri Sep 5 10:47:46 2008 +0200
+
+    devices: Use list_add_tail() instead of list_add() to register a device
+
+    This patch fixes a problem spotted on Glacier/Canyonlands (and most
+    likely lots of other board ports), that no serial output was seen
+    after console initialization in console_init_r(). This is because the
+    last added console device was used instead of the first added.
+
+    This patch fixes this problem by using list_add_tail() instead of
+    list_add() to register a device. This way the first added console
+    is used again.
+
+    Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 78d78236896d62bb8ca7302af38d8f1493eb2651
+Author: Victor Gallardo <vgallardo@amcc.com>
+Date:	Thu Sep 4 23:49:36 2008 -0700
+
+    ppc4xx: Add support for GPCS, SGMII and M88E1112 PHY
+
+    This patch adds GPCS, SGMII and M88E1112 PHY support
+    for the AMCC PPC460GT/EX processors.
+
+    Signed-off-by: Victor Gallardo <vgallardo@amcc.com>
+    Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit f6b6c45840f9b4671d2d97243a12a1f3ffb64765
+Author: Adam Graham <agraham@amcc.com>
+Date:	Wed Sep 3 12:26:59 2008 -0700
+
+    ppc4xx: Update Kilauea to use PPC4xx DDR autocalibration routines
+
+    Signed-off-by: Adam Graham <agraham@amcc.com>
+    Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 075d0b81e896e8735ae26372cd384f87cbd24e41
+Author: Adam Graham <agraham@amcc.com>
+Date:	Wed Sep 3 12:26:28 2008 -0700
+
+    ppc4xx: IBM Memory Controller DDR autocalibration routines
+
+    Alternate SDRAM DDR autocalibration routine that can be generically used
+    for any PPC4xx chips that have the IBM SDRAM Controller core allowing for
+    support of more DIMM/memory chip vendors and gets the DDR autocalibration
+    values which give the best read latency performance (SDRAM0_RDCC.[RDSS]).
+
+    Two alternate SDRAM DDR autocalibration algoritm are provided in this patch,
+    "Method_A" and "Method_B".	DDR autocalibration Method_A scans the full range
+    of possible PPC4xx	SDRAM Controller DDR autocalibration values and takes a
+    lot longer to run than Method_B.  Method_B executes in the same amount of time
+    as the currently existing DDR autocalibration routine, i.e. 1 second or so.
+    Normally Method_B is used and it is set as the default method.
+
+    The current U-Boot PPC4xx DDR autocalibration code calibrates the IBM SDRAM
+    Controller registers.[bit-field]:
+    1)	SDRAM0_RQDC.[RQFD]
+    2)	SDRAM0_RFDC.[RFFD]
+
+    This alternate PPC4xx DDR autocalibration code calibrates the following
+    IBM SDRAM Controller registers.[bit-field]:
+
+    1)	SDRAM0_WRDTR.[WDTR]
+    2)	SDRAM0_CLKTR.[CKTR]
+    3)	SDRAM0_RQDC.[RQFD]
+    4)	SDRAM0_RFDC.[RFFD]
+
+    and will also use the calibrated settings of the above four registers that
+    produce the best "Read Sample Cycle Select" value in the SDRAM0_RDCC.[RDSS]
+    register.[bit-field].
+
+    Signed-off-by: Adam Graham <agraham@amcc.com>
+    Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit e07f4a8033b6270b8103049adb6456f660ff4a89
+Author: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
+Date:	Mon Sep 1 13:09:39 2008 -0400
+
+    ppc44x: Unification of virtex5 pp440 boards
+
+    This patch provides an unificated way of handling xilinx v5 ppc440 boards.
+
+    It unificates 3 different things:
+
+    1) Source code
+    A new board called ppc440-generic has been created. This board includes
+    a generic tlb initialization (Maps the whole memory into virtual) and
+    defines board_pre_init, checkboard, initdram and get_sys_info weakly,
+    so, they can be replaced by specific functions.
+
+    If a new board needs to redefine any of the previous functions
+    (specific initialization) it can create a new directory with the
+    specific initializations needed. (see the example ml507 board).
+
+    2) Configuration file
+    Common configurations are located under configs/xilinx-ppc440.h, this
+    header file interpretes the xparameters file generated by EDK and
+    configurates u-boot in correspondence. Example: if there is a Temac,
+    allows CMD_CONFIG_NET
+    Specific configuration are located under specific configuration file.
+    (see the example ml507 board)
+
+    3) Makefile
+    Some work has been done in order to not duplicate work in the Main
+    Makefile. Please see the attached code.
+
+    In order to support new boards they can be implemented in the next way:
+
+    a) Simple Generic Board  (90% of the time)
+    Using EDK generates a new xparameters.h file, replace
+    ppc440-generic/xparameters.h  and run make xilinx-ppc440-generic_config
+    && make
+
+    b) Simple Boards with special u-boot parameters (9 % of the time)
+    Create a new file under configs for it (use ml507.h as example) and
+    change your paramaters. Create a new Makefile paragraph and compile
+
+    c) Complex boards (1% of the time)
+    Create a new folder for the board, like the ml507
+
+    Finally, it adds support for the Avnet FX30T Evaluation board, following
+    the new generic structure:
+
+    Cheap board by Avnet for evaluating the Virtex5 FX technology.
+
+    This patch adds support for:
+     - UartLite
+     - 16MB Flash
+     - 64MB RAM
+
+    Prior using U-boot in this board, read carefully the ERRATA by Avnet
+    to solve some memory initialization issues.
+
+    Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
+    Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 64ac1eb5afafced49b327425ad1814b2dc422d6e
+Author: Nick Spence <nick.spence@freescale.com>
+Date:	Tue Sep 2 15:21:16 2008 -0500
+
+    mpc83xx: fix mpc8313 in-tree building with NAND
+
+    and add mpc8313 NAND build to MAKEALL
+
+    Signed-off-by: Nick Spence <nick.spence@freescale.com>
+    Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 6eb2a44e27919fdc601e0c05404b298a7602c0e3
+Author: Nick Spence <nick.spence@freescale.com>
+Date:	Thu Aug 28 14:09:25 2008 -0700
+
+    mpc83xx: clean up cache operations and unlock_ram_in_cache() functions
+
+    Cleans up some latent issues with the data cache control so that
+    dcache_enable() and dcache_disable() will work reliably (after
+    unlock_ram_in_cache() has been called)
+
+    Signed-off-by: Nick Spence <nick.spence@freescale.com>
+    Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 46497056ae3b1e81e736e9cf3a170472c5d9719f
+Author: Nick Spence <nick.spence@freescale.com>
+Date:	Thu Aug 28 14:09:19 2008 -0700
+
+    mpc83xx: Store and display Arbiter Event Register values
+
+    Record the Arbiter Event Register values and optionally display them.
+
+    The Arbiter Event Register can record the type and effective address of
+    an arbiter error, even through an HRESET. This patch stores the values in
+    the global data structure.
+
+    Display of the Arbiter Event registers immediately after the RSR value
+    can be enabled with defines. The Arbiter values will only be displayed
+    if an arbiter event has occured since the last Power On Reset, and either
+    of the following defines exist:
+     #define CONFIG_DISPLAY_AER_BRIEF - display only the arbiter address and
+					and type register values
+     #define CONFIG_DISPLAY_AER_FULL  - display and interpret the arbiter
+					event register values
+
+    Address Only transactions are one of the trapped events that can register
+    as an arbiter event. They occur with some cache manipulation instructions
+    if the HID0_ABE (Address Broadcast Enable) is set and the memory region
+    has the MEMORY_COHERENCE WIMG bit set. Setting:
+     #define CONFIG_MASK_AER_AO - prevents the arbiter from recording address
+				  only events, so that it can still capture
+				  other real problems.
+
+    Signed-off-by: Nick Spence <nick.spence@freescale.com>
+    Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit ade50c7fa1b16ef98be17e9c3ae286aecf4f5605
+Author: Nick Spence <nick.spence@freescale.com>
+Date:	Thu Aug 28 14:09:11 2008 -0700
+
+    mpc83xx: use r4 instead of r2 in lock_ram_in_cache and unlock_ram_in_cache
+
+    This is needed in unlock_ram_in_cache() because it is called from C and
+    will corrupt the small data area anchor that is kept in R2.
+
+    lock_ram_in_cache() is modified similarly as good coding practice, but
+    is not called from C.
+
+    Signed-off-by: Nick Spence <nick.spence@freescale.com>
+    Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit d9fe88173cb4f7d293796ffe10c7a0d3d426d8f9
+Author: Nick Spence <nick.spence@freescale.com>
+Date:	Fri Aug 22 23:52:50 2008 -0700
+
+    MPC83XX: Fix GPIO configuration - set gpio level before direction
+
+    Set DAT value before DIR values to avoid creating glitches on the
+    GPIO signals.
+
+    Set gpio level register before direction register to inhibit
+    glitches on high level output pins.
+
+    Dir and data gets cleared at powerup, so high level output lines see
+    a short low pulse between setting the direction and level registers.
+
+    Issue was seen on a new board with the nReset line of the NOR flash
+    connected to a GPIO. Setting the direction register puts the NOR flash
+    in reset so the next instruction to set the level cannot get executed.
+
+    Signed-off-by: Nick Spence <nick.spence@freescale.com>
+    Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
+    Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 7007c5975ee900ad70983b0681d3251e221f8321
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date:	Tue Sep 2 02:58:32 2008 +0200
+
+    doc/qemu_mips: add doc howto debug u-boot with gdb
+
+    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 7deb3b3ecd0e81ef09bb68aa0ec2346f4ae0a405
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date:	Wed Sep 3 17:15:45 2008 +0200
+
+    ppx4xx: Fix broken DASA_SIM board
+
+    This patch adds initdram() to DASA_SIM boards that has been
+    removed accidentally by a previous commit.
+
+    Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+    Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 7e410aa30fbcb1d19a26bbf1e84a9ca6102d534b
+Author: Stefan Roese <sr@denx.de>
+Date:	Mon Sep 1 08:35:37 2008 +0200
+
+    ppc4xx: Remove reference to common/lists.o from some esd linker scripts
+
+    This patch removes some direct references to common/lists.o from some
+    esd linker scripts. This is necessary because the lists source was moved
+    and is not in the "common" directory anymore.
+
+    Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 97b0734d65f8a0b03df0a335a2addc759da56107
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date:	Tue Sep 2 16:33:05 2008 +0200
+
+    ppc4xx: Remove obsolete or unused functions from some esd boards
+
+    This patch removes initdram() and testdram() from most esd 405 platforms.
+    Some boards also have an empty dummy implementation of
+    misc_init_f(). This is also removed.
+
+    Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+    Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 1092ce218c514e5ccb18450ac5af501d96d6e3e9
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date:	Tue Sep 2 15:07:54 2008 +0200
+
+    ppc4xx: Update VOM405 board configuration
+
+    - remove PCI code
+    - add command line editing
+    - minor cleanup
+
+    Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+    Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 830c800e28e96ec7c3c6936a0bd1b9461f3e77d4
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date:	Tue Sep 2 15:07:53 2008 +0200
+
+    ppc4xx: Remove obsolete initdram() function from VOM405 board
+
+    This patch removed the obsolete initdram() function from
+    VOM405 platform file.
+
+    Some minor cleanup.
+
+    Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+    Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 3d4dd7a941b2327b8c2fc535b782ca307ff8b6c8
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date:	Tue Sep 2 15:07:52 2008 +0200
+
+    ppc4xx: Cleanup VOM405 linker script
+
+    Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+    Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit fcaffd597f6f5191b12ca66c2a4789bbdeea85c2
+Author: Matthias Fuchs <mf@esd.eu>
+Date:	Tue Sep 2 15:07:51 2008 +0200
+
+    ppc4xx: Add fdt support for VOM405 boards
+
+    Signed-off-by: Matthias Fuchs <mf@esd.eu>
+    Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 9ec367aa2c5dcf79558aa2b209b45d7686654c14
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date:	Tue Sep 2 11:36:14 2008 +0200
+
+    ppc4xx: Coding style cleanup
+
+    Wrap long lines etc.
+
+    Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+    Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 17e65c21adfb63980e6aff80bfbd2df0eeb12060
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date:	Tue Sep 2 11:35:56 2008 +0200
+
+    ppc4xx: Enable USB on PLU405 boards
+
+    This patch enables the PCI-OHCI controller on PLU405 board.
+
+    Also the default CPU frequency is updated to 266 MHz and
+    command line editing is enabled.
+
+    Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+    Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 40e43e3b87d57b2ac786e27f6e25a7df9940d93b
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date:	Tue Sep 2 11:35:35 2008 +0200
+
+    ppc4xx: Cleanup PLU405 platform file
+
+    This patch
+    - wraps some long lines
+    - removes unused/obsolete functions: misc_init_f() and initdram()
+
+    Signed-off-by: Matthias Fuchs <mf@esd.eu>
+    Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit d74cdb1d0614ab78128e0735a51e7988a7b7ea33
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date:	Tue Sep 2 11:35:04 2008 +0200
+
+    ppc4xx: Cleanup PLU405 linker script
+
+    Signed-off-by: Matthias Fuchs <mf@esd.eu>
+    Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 3bc1054cec2f6b25822f301ea922a16233baa4c7
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date:	Tue Sep 2 11:34:36 2008 +0200
+
+    ppc4xx: Add fdt support for PLU405 boards
+
+    Signed-off-by: Matthias Fuchs <mf@esd.eu>
+    Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 5a3e480b783bfbc139586293a54fb875d7c5c5d4
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date:	Tue Sep 2 11:34:08 2008 +0200
+
+    ppc4xx: Increase U-Boot size to 384kB for PLU405 boards
+
+    Signed-off-by: Matthias Fuchs <mf@esd.eu>
+    Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit be1b0d2777e179191a57b138b660547a17e55aad
+Author: Jochen Friedrich <jochen@scram.de>
+Date:	Tue Sep 2 11:24:59 2008 +0200
+
+    Don't tftp to unknown flash
+
+    If a board has a variable number of flash banks, there are empty entries
+    in flash_info[] and CFG_DIRECT_FLASH_TFTP is set, tftp boot fails with
+    "Outside available Flash". This patch skips flash banks with unknown
+    flash ids.
+
+    Signed-off-by: Jochen Friedrich <jochen@scram.de>
+    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 33314470ab32a3f5412bb61b5f3d6c216c88bf9b
+Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+Date:	Thu Aug 28 13:40:44 2008 +0900
+
+    net: smc911x: Add pkt_data_pull and pkt_data_push function
+
+    The RSK7203 board has the SMSC9118 wired up 'incorrectly'.
+    Byte-swapping is necessary, and so poor performance is inevitable.
+    This problem cannot evade by the swap function of CHIP, this can
+    evade by software Byte-swapping.
+    And this has problem by FIFO access only. pkt_data_pull/pkt_data_push
+    functions necessary to solve this problem.
+
+    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 10efa024b8ffd9e6aaca63da8bddfdffdc672274
+Author: Ben Warren <biggerbadderben@gmail.com>
+Date:	Sun Aug 31 20:37:00 2008 -0700
+
+    Moved initialization of EEPRO100 Ethernet controller to board_eth_init()
+
+    Affected boards:
+	db64360
+	db64460
+	katmai
+	taihu
+	taishan
+	yucca
+	cpc45
+	cpu87
+	eXalion
+	elppc
+	debris
+	kvme080
+	mpc8315erdb
+	integratorap
+	ixdp425
+	oxc
+	pm826
+	pm828
+	pm854
+	pm856
+	ppmc7xx
+	sc3
+	sc520_spunk
+	sorcery
+	tqm8272
+	tqm85xx
+	utx8245
+
+    Removed initialization of the driver from net/eth.c
+    Also, wrapped contents of pci_eth_init() by CONFIG_PCI.
+
+    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 8ca0b3f99c4fce7a599dcaf92ae095496dc8c8e0
+Author: Ben Warren <biggerbadderben@gmail.com>
+Date:	Sun Aug 31 10:45:44 2008 -0700
+
+    Moved initialization of TULIP Ethernet controller to board_eth_init()
+
+    Affected boards:
+	cu824
+	bab7xx
+	adciop
+	dasa_sim
+	mousse
+	mpc8540eval
+	musenki
+	mvblue
+	pcippc2/pcippc6
+	sbc8240
+	stxssa
+
+    Removed initialization of the driver from net/eth.c
+
+    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit ad3381cf4167120db5c7b88e4970245e1d5c0a32
+Author: Ben Warren <biggerbadderben@gmail.com>
+Date:	Sun Aug 31 10:44:19 2008 -0700
+
+    Moved initialization of E1000 Ethernet controller to board_eth_init()
+
+    Affected boards:
+	ap1000
+	mvbc_p
+	PM854
+
+    Removed initialization of the driver from net/eth.c
+
+    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 4fce2aceaf8afd31a252bc782c9dbc497bf40487
+Author: Ben Warren <biggerbadderben@gmail.com>
+Date:	Sun Aug 31 10:40:51 2008 -0700
+
+    Moved initialization of plb2800 Ethernet driver to board_eth_init
+
+    Affected boards:
+	purple
+
+    Removed initialization of controller from net/eth.c
+
+    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit e1d7480b5de1fd4830bf7cf5e2237d3b0846d08d
+Author: Ben Warren <biggerbadderben@gmail.com>
+Date:	Sun Aug 31 10:39:12 2008 -0700
+
+    Moved initialization of MPC5xxx_FEC Ethernet driver to CPU directory
+
+    Modified board_eth_init() functions of boards that have this FEC in addition
+    to other Ethernet controllers.
+
+    Affected boards:
+	bc3450
+	icecube
+	mvbc_p
+	o2dnt
+	pm520
+	total5200
+	tq5200
+
+    Removed initialization of controller from net/eth.c
+
+    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit a0aad08f9427ac00218bdb2cb649833ce6ec9b8d
+Author: Ben Warren <biggerbadderben@gmail.com>
+Date:	Sun Aug 31 10:36:38 2008 -0700
+
+    Moved initialization of MPC512x_FEC Ethernet driver to CPU directory
+
+    Added a cpu_eth_init() function to MPC512x CPU directory and
+    removed code from net/eth.c
+
+    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 8218bd2aa68820b878a8413493ae17fd8d21f944
+Author: Ben Warren <biggerbadderben@gmail.com>
+Date:	Sun Aug 31 10:16:59 2008 -0700
+
+    Moved initialization of IncaIP Ethernet controller to board_eth_init
+
+    Affected boards:
+	IncaIP
+
+    Removed initialization of the driver from net/eth.c
+
+    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 164846eeb25cb2a5ede7ab9371fdca7f4831a055
+Author: Ben Warren <biggerbadderben@gmail.com>
+Date:	Sun Aug 31 10:15:26 2008 -0700
+
+    Moved initialization of 3COM Ethernet controller (AmigaOne) to board_eth_init()
+
+	Affected boards:
+	    AmigaOneG3SE
+
+	Removed initialization of the driver from net/eth.c
+
+    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 6aca145e067efe75398e9fac97822bd3700de0b2
+Author: Ben Warren <biggerbadderben@gmail.com>
+Date:	Sun Aug 31 10:13:34 2008 -0700
+
+    Moved initialization of GT6426x Ethernet controller to board_eth_init()
+
+    Affected boards:
+	EVB64260
+	P3G4
+	ZUMA
+
+    Removed initialization of the driver from net/eth.c
+
+    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit e3090534d62045dcb73f5392bacc64a4e8e443dc
+Author: Ben Warren <biggerbadderben@gmail.com>
+Date:	Sun Aug 31 10:08:43 2008 -0700
+
+    Moved initialization of PCNET Ethernet controller to board_eth_init()
+
+    Affected boards:
+	PN62
+	sc520_cdp
+
+    Removed initialization of the driver from net/eth.c
+
+    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit b902b8dda5e1fd4d5fe2f202c71ee3521d2c40ed
+Author: Ben Warren <biggerbadderben@gmail.com>
+Date:	Sun Aug 31 10:07:16 2008 -0700
+
+    Moved initialization of NATSEMI Ethernet controller to board_eth_init()
+
+    Affected boards:
+	a3000
+
+    Removed initialization of the driver from net/eth.c
+
+    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 19403633dd70333893c2da7926a1d0dcd6dab7d8
+Author: Ben Warren <biggerbadderben@gmail.com>
+Date:	Sun Aug 31 10:03:22 2008 -0700
+
+    Moved initialization of NS8382X Ethernet controller to board_eth_init()
+
+    Affected boards:
+	bc3450
+	cpci5200
+	mecp5200
+	pf2000
+	icecube
+	o2dnt
+	pm520
+	sandpoint8245
+	total5200
+	tqm5200
+
+    Removed initialization of the driver from net/eth.c
+
+    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit ccdd12f83ef93719fbe85f642aa4dc648b9498f0
+Author: Ben Warren <biggerbadderben@gmail.com>
+Date:	Sun Aug 31 09:59:33 2008 -0700
+
+    Moved initialization of TSI108 Ethernet controller to board_eth_init()
+
+    Affected boards:
+	mpc7448hpc2
+
+    Removed initialization of the driver from net/eth.c
+
+    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 0b252f50ae218ae15bfb63af44227972686ebc56
+Author: Ben Warren <biggerbadderben@gmail.com>
+Date:	Sun Aug 31 21:41:08 2008 -0700
+
+    Moved initialization of RTL8139 Ethernet controller to board_eth_init()
+
+    Affected boards:
+	hidden_dragon
+	MPC8544DS
+	MPC8610HPCN
+	R2DPLUS
+	TB0229
+
+    Removed initialization of the driver from net/eth.c
+
+    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 02d69891d95ee76b0e86e1715a4dc0b964a57cb7
+Author: Ben Warren <biggerbadderben@gmail.com>
+Date:	Sun Aug 31 09:49:42 2008 -0700
+
+    Moved initialization of RTL8169 Ethernet controller to board_eth_init()
+
+    Affected boards:
+	linkstation
+	r7780mp
+
+    Removed initialization of the driver from net/eth.c
+
+    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 3ae071e44256144d6c1e3febb65f6c56bd433769
+Author: Ben Warren <biggerbadderben@gmail.com>
+Date:	Tue Aug 12 22:11:53 2008 -0700
+
+    Moved initialization of Ethernet controllers on Atmel AT91 to board_eth_init()
+
+    Removed at91sam9_eth_initialize() from net/eth.c
+
+    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 89973f8a82c28ad893c4c3cc56839a8e10fe5f13
+Author: Ben Warren <biggerbadderben@gmail.com>
+Date:	Sun Aug 31 22:22:04 2008 -0700
+
+    Introduce netdev.h header file and remove externs
+
+    This addresses all drivers whose initializers have already
+    been moved to board_eth_init()/cpu_eth_init().
+
+    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 5a8a163ac394d9f4f7ff57f415d82bd673b0068c
+Author: Andy Fleming <afleming@freescale.com>
+Date:	Sun Aug 31 16:33:30 2008 -0500
+
+    Add pixis_set_sgmii command
+
+    The 8544DS and 8572DS platforms support an optional SGMII riser card to
+    expose ethernet over an SGMII interface.  Once the card is in, it is also
+    necessary to configure the board such that it uses the card, rather than
+    the on-board ethernet ports.  This can either be done by flipping dip switches
+    on the motherboard, or by modifying registers in the pixis.  Either way
+    requires a reboot.
+
+    This adds a command to allow users to choose which ports are routed through
+    the SGMII card, and which through the onboard ports.  It also allows users
+    to revert to the current switch settings.
+
+    This code does not work on the 8572, as the PIXIS is different.
+
+    Signed-off-by: Andy Fleming <afleming@freescale.com>
+    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 216f2a7156a5fde7b47adc40ad553c888a9cbaa7
+Author: Andy Fleming <afleming@freescale.com>
+Date:	Sun Aug 31 16:33:29 2008 -0500
+
+    Add SGMII support for the 8544 DS
+
+    The 8544 DS has an optional SGMII Riser card, which uses different PHY
+    addresses.	Check if we are in SGMII mode, and invoke the SGMII Riser
+    setup code if so.
+
+    Signed-off-by: Andy Fleming <afleming@freescale.com>
+    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 652f7c2eef76a1340928bd660845441e932d86a2
+Author: Andy Fleming <afleming@freescale.com>
+Date:	Sun Aug 31 16:33:28 2008 -0500
+
+    Add support for Freescale SGMII Riser Card
+
+    The 8544DS and 8572DS systems have an optional SGMII riser card which
+    exposes new ethernet ports which are connected to the eTSECs via an
+    SGMII interface.  The SGMII PHYs for this board are offset from the standard
+    PHY addresses, so this code modifies the passed in tsec_info structure to
+    use the SGMII PHYs on the card, instead.
+
+    Signed-off-by: Andy Fleming <afleming@freescale.com>
+    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 2abe361c03b43e6dcf68f54e96b5c05156c49284
+Author: Andy Fleming <afleming@freescale.com>
+Date:	Sun Aug 31 16:33:27 2008 -0500
+
+    Add SGMII support to the tsec
+
+    Adds support for configuring the TBI to talk properly with the SerDes.
+
+    Signed-off-by: Andy Fleming <afleming@freescale.com>
+    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 75b9d4ae0d69f214eab641caf12ce8af83a39a42
+Author: Andy Fleming <afleming@freescale.com>
+Date:	Sun Aug 31 16:33:26 2008 -0500
+
+    Pass in tsec_info struct through tsec_initialize
+
+    The tsec driver contains a hard-coded array of configuration information
+    for the tsec ethernet controllers.	We create a default function that works
+    for most tsecs, and allow that to be overridden by board code.  It creates
+    an array of tsec_info structures, which are then parsed by the corresponding
+    driver instance to determine configuration.  Also, add regs, miiregs, and
+    devname fields to the tsec_info structure, so that we don't need the kludgy
+    "index" parameter.
+
+    Signed-off-by: Andy Fleming <afleming@freescale.com>
+    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit dd3d1f56a01f460d560766126ee7dfed2ea9bc10
+Author: Andy Fleming <afleming@freescale.com>
+Date:	Sun Aug 31 16:33:25 2008 -0500
+
+    tsec: Move tsec.h to include/
+
+    This is to prepare the way for board code passing in the tsec_info structure
+
+    Signed-off-by: Andy Fleming <afleming@freescale.com>
+    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit d23dc394aa69093b6326ad917db04dc0d1aff3f8
+Author: Sergei Poselenov <sposelenov@emcraft.com>
+Date:	Fri Jun 6 15:52:44 2008 +0200
+
+    PHY: Add support for the M88E1121R Marvell chip.
+
+    Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
+    Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
+    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 1711f3bd16d1c5e9d17b4c0198b426d86999781b
+Author: Wolfgang Denk <wd@denx.de>
+Date:	Tue Sep 2 21:17:36 2008 +0200
+
+    fw_env.c: fix build problems with MTD_VERSION=old
+
+    (as needed to support old 2.4 Linux kernel based releases)
+
+    Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 628ffd73bcff0c9f3bc5a8eeb2c7455fe9d28a51
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date:	Mon Sep 1 17:11:26 2008 +0200
+
+    device: make device_register() clone the device
+
+    This is expected by the callers, but this fact was hidden well within
+    the old list implementation.
+
+    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit c75e772a2f061a508bba28ded1b5bea91f0442b0
+Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+Date:	Sun Aug 31 23:28:15 2008 +0900
+
+    sh: Remove CC line from board's Makefile
+
+    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit 468eae0660de6fdfd9999944c536ecc4797bd944
+Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+Date:	Sun Aug 31 23:25:57 2008 +0900
+
+    sh: Replaced "@./mkconfig" for @$(MKCONFIG)
+
+    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit 3aeb1ff7482a732503186c742d3a5ded4b7a0d34
+Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+Date:	Thu Aug 28 14:50:52 2008 +0900
+
+    sh: Add support sh2 to MAKEALL
+
+    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit 6f3d8bb5faa12dbf3031382286784c978df038ee
+Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+Date:	Thu Aug 28 14:52:23 2008 +0900
+
+    sh: Fix compile error rsk7203 board
+
+    This boards used old type preprocessor.
+    This patch fix compile error.
+
+    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit 1c98172e025018552e9bb4c43b0aaee76f79b1aa
+Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+Date:	Thu Aug 28 14:53:31 2008 +0900
+
+    sh: Fix compile error sh7785lcr board
+
+    This boards used old type preprocessor.
+    This patch fix compile error.
+
+    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit 6f0da4972e48f99d37bc522814940a6022cd3084
+Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+Date:	Fri Aug 22 17:39:09 2008 +0900
+
+    sh: Renesas Solutions AP325RXA board support
+
+    AP325RXA is SH7723's reference board.
+    This has SCIF, NOR Flash, Ethernet, USB host, LCDC, SD Host, Camera and other.
+    In this patch, support SCIF, NOR Flash, and Ethernet.
+
+    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit ab09f433b50bb83b5e440c335bc3839ee069e534
+Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+Date:	Fri Aug 22 17:48:51 2008 +0900
+
+    sh: add support Renesas SH7723
+
+    Renesas SH7723 has 5 SCIF, SD, Camera, LCDC and other.
+    This patch supports CPU register's header file and SCIF serial driver.
+
+    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit c655fad06ba3fb042dbc667724a40e1a9a091248
+Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+Date:	Sun Aug 31 23:02:04 2008 +0900
+
+    sh: Renesas RSK+ 7203 board support
+
+    This adds initial support for the RTE RSK+ SH7203 board.
+
+    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit 6ede753ddf52a7b0f992d9bccbe5e4a0968ca475
+Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+Date:	Thu Jul 3 23:11:02 2008 +0900
+
+    sh: Add support Renesas SH7203 processor
+
+    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit 6ad43d0dd86b612895ddc7f480eb6cdfe793adf9
+Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+Date:	Sun Aug 31 22:48:33 2008 +0900
+
+    sh: Add support SH2/SH2A which is CPU of Renesas Technology
+
+    Add support SH2/SH2A basic function.
+
+    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit 0d53a47dc0737b6aa3a39caee21410c169441ae5
+Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+Date:	Sun Aug 31 22:45:08 2008 +0900
+
+    sh: Renesas R0P7785LC0011RL board support
+
+    This board has SH7785, 512MB DDR2-SDRAM, NOR Flash,
+    Graphic, Ethernet, USB, SD, RTC, and I2C controller.
+
+    This patch supports the following functions:
+     - 128MB DDR2-SDRAM (29-bit address mode only)
+     - NOR Flash
+     - USB host
+     - Ethernet
+
+    Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
+    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit b0b6218929bc7de9a6bdb8e564fa8ec2efa71b4e
+Author: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
+Date:	Thu Jul 10 19:32:53 2008 +0900
+
+    sh: add support for SH7785
+
+    Renesas SH7785 has DDR2-SDRAM controller, PCI, and other.
+    This patch supports CPU register's header file.
+
+    Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
+    Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit d6e04258be8f2408845468d3cf722a4cf0433445
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date:	Sun Aug 31 04:45:42 2008 +0200
+
+    davinci: fix remaining dm644x_eth
+
+    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 08ab4e1780fa63c88dd5a5ab52f4ff4ed1ee1878
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date:	Sun Aug 31 04:24:56 2008 +0200
+
+    fs: Move conditional compilation to Makefile
+
+    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit c1de7a6daf9c657484e1c6d433f01fccd49a7f48
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date:	Sun Aug 31 04:24:55 2008 +0200
+
+    devices: merge to list_head
+
+    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit ef0255fc75f28655f9681422079287d68a14dbaa
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date:	Sun Aug 31 04:24:51 2008 +0200
+
+    update linux/list
+
+    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 71cb31227bee741b274f6c0279b2aac1ab8e28e3
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date:	Sun Aug 31 00:39:48 2008 +0200
+
+    smdk6400: add gitignore
+
+    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit f9f692e2b146d4e306b777e6d5f69f1d725b9eb9
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date:	Sun Aug 31 00:39:48 2008 +0200
+
+    smdk6400: Use CONFIG_FLASH_CFI_DRIVER
+
+    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 7c0e5a8db3d1358b0ce3cc85ada0de6341ca4a15
+Author: Guennadi Liakhovetski <lg@denx.de>
+Date:	Sun Aug 31 00:39:47 2008 +0200
+
+    smdk6400: remove redundant bootargs definition
+
+    Double bootargs setting leads to a duplicated environmant entry.
+
+    Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
+
+commit 11edcfe260f20dcea79284a3e95270989d433854
+Author: Guennadi Liakhovetski <lg@denx.de>
+Date:	Sun Aug 31 00:39:47 2008 +0200
+
+    ARM: Add support for S3C6400 based SMDK6400 board
+
+    SMDK6400 can only boot U-Boot from NAND-flash. This patch adds a nand_spl
+    driver for it too. The board can also boot from the NOR flash, but due to
+    hardware limitations it can only address 64KiB on it, which is not enough
+    for U-Boot. Based on the original sources by Samsung for U-Boot 1.1.6.
+
+    Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
+
+commit e0056b341069796eaea11eae0fc8eb93a3dceaac
+Author: Guennadi Liakhovetski <lg@denx.de>
+Date:	Sun Aug 31 00:39:47 2008 +0200
+
+    NAND: add NAND driver for S3C64XX
+
+    Based on the original S3C64XX NAND driver by Samsung for U-Boot 1.1.6.
+
+    Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
+
+commit 3fe7b589f9c7463df39056f8872006a67f56a91c
+Author: Guennadi Liakhovetski <lg@denx.de>
+Date:	Sun Aug 31 00:39:47 2008 +0200
+
+    S3C64XX: remove broken HWFLOW support from the serial driver
+
+    As noted by Harald Welte, HWFLOW support in the S3C64XX serial driver is
+    broken and currently unused. Remove it.
+
+    Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
+
+commit 2fb28dcf82048045e1bf5014e938e486fa6c2383
+Author: Guennadi Liakhovetski <lg@denx.de>
+Date:	Sun Aug 31 00:39:47 2008 +0200
+
+    serial: add S3C64XX serial driver
+
+    Based on the original S3C64XX UART driver by Samsung for U-Boot 1.1.6.
+
+    Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
+
+commit 8262813ca04fc57f5d8856e1828085c136e0f1eb
+Author: Guennadi Liakhovetski <lg@denx.de>
+Date:	Sun Aug 31 00:39:46 2008 +0200
+
+    USB: Add support for OHCI controller on S3C6400
+
+    Notice: USB on S3C6400 currently works _only_ with switched off MMU. One could
+    try to enable the MMU, but map addresses 1-to-1, and disable data cache, then
+    it should work too and we could still profit from instruction cache.
+
+    Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
+
+commit 9b07773f8883665b002500c190507e9fd99b7181
+Author: Guennadi Liakhovetski <lg@denx.de>
+Date:	Sun Aug 31 00:39:46 2008 +0200
+
+    ARM: Add arm1176 core with S3C6400 SoC
+
+    Based on the original S3C64XX port by Samsung for U-Boot 1.1.6.
+
+    Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
+
+commit fcaac589a68115819ddadcf5c18ded9a5f9e2c75
+Author: Sandeep Paulraj <s-paulraj@ti.com>
+Date:	Sun Aug 31 00:39:46 2008 +0200
+
+    ARM DaVinci: Changing function names for EMAC driver
+
+    DM644x is just one of a series of DaVinci chips that use the EMAC driver.
+    By replacing all the function names that start with dm644x_* to davinci_*
+    we make these function more portable. I have tested this change on my EVM.
+    DM6467 is another DaVinci SOC which uses the EMAC driver and i will
+    be sending patches that add DaVinci DM6467 support to the list soon.
+
+    Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
+
+commit fbbb1de369ca7d5ace6f7b0ce9d0aee24a6f457b
+Author: Gururaja Hebbar K R <gururajakr@sanyo.co.in>
+Date:	Sat Aug 30 23:21:30 2008 +0200
+
+    Integrator[AP/CP] - Remove unused file memsetup.S
+
+    - memsetup.s is changed/merged to lowlevel_init.S
+      memsetup.S has a global label memsetup that just returns back to caller
+    - memsetup global label is changed/merged to lowlevel_init
+      This label is not called from anywhere.
+
+    Signed-off-by: Gururaja Hebbar <gururajakr@sanyo.co.in>
+
+commit 89d51d022a63be1a851eda983c8cbce1a044f65f
+Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
+Date:	Wed Aug 27 21:35:52 2008 +0200
+
+    ARM DaVinci: Standardize names of directories/files
+
+    ARM DaVinci: Standardize names of directories/files.
+
+    Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
+    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 264bbdd11d01f14f5ea4629556ae63b00b13402d
+Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
+Date:	Fri Jul 11 15:10:13 2008 -0400
+
+    ARM DaVinci: Move common functions to board/davinci/common
+
+    ARM DaVinci: Move common functions to board/davinci/common.
+
+    Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
+
+commit c2b4b2e4814f4ace9015fdb64132894327400bf0
+Author: Stefan Roese <sr@denx.de>
+Date:	Fri Aug 29 11:56:49 2008 +0200
+
+    ppc4xx/NAND: Add select_chip function to 4xx NDFC driver
+
+    This function is needed for the new NAND infrastructure. We only need
+    a dummy implementation though for the NDFC.
+
+    Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 3d4a746e2fb4545f07d871049805fb34ae97cc94
+Author: Stefan Roese <sr@denx.de>
+Date:	Fri Aug 29 12:06:27 2008 +0200
+
+    ppc4xx: Increase image size for NAND boot target
+
+    This is needed since now with HUSH enabled (amcc-common.h) the image
+    read from NAND exceeds the previous limit.
+
+    Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 6b5049d056cd8ef72d1f2f461ceb2d033d93f759
+Author: Ben Warren <biggerbadderben@gmail.com>
+Date:	Thu Aug 28 23:58:30 2008 -0700
+
+    Move MPC512x_FEC driver to drivers/net
+
+    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 80b00af01b3c9154774de2936f05a051e92f6a03
+Author: Ben Warren <biggerbadderben@gmail.com>
+Date:	Thu Aug 28 23:58:29 2008 -0700
+
+    Move MPC5xxx_FEC driver to drivers/net
+
+    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 3de7bf0e6b1ad2608014096c8192f13229b2e9d7
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date:	Fri Aug 29 21:53:57 2008 +0200
+
+    cmd_terminal: remove no need ifdef
+
+    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 578118bdf122877ae769776be002255be447b4fa
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date:	Fri Aug 29 21:53:57 2008 +0200
+
+    common/Makefile: order by functionality
+
+    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit ba7b5b2348b684cf8ec424b2e38e267dc1cfd2fb
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date:	Fri Aug 29 21:53:56 2008 +0200
+
+    miiphyutil: Move conditional compilation to Makefile
+
+    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 81789c39db3f0f6b621df8c0ec66014d701f368e
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date:	Fri Aug 29 21:53:37 2008 +0200
+
+    autoscript: Move conditional compilation to Makefile
+
+    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit bbf52df9aa94ffb115b8b1ebeb00d01374bb0a1d
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date:	Fri Aug 29 01:18:11 2008 +0200
+
+    crc16: move to lib_generic
+
+    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 55195773eacefb22dd483a3c560ea30a14263ce1
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date:	Fri Aug 29 01:18:01 2008 +0200
+
+    miiphybb: move to drivers/net/phy
+
+    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit e8314035996a9118ac5948df2ff8a2f2161ed67a
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date:	Thu Aug 28 12:31:51 2008 +0200
+
+    soft_spi: move to drivers/spi
+
+    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 4d75e0aa9caca64d4a1d55d95cd1ca5f30d9fc56
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date:	Thu Aug 28 12:31:51 2008 +0200
+
+    soft_i2c: move to drivers/i2c
+
+    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 717a222229fdb77703e9174d0eb08a4b41febf49
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date:	Thu Aug 28 12:31:48 2008 +0200
+
+    gunzip: move to lib_generic
+
+    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 52aef8f9ba28b747973bf76741c23db658d5773c
+Author: Wolfgang Ocker <weo@reccoware.de>
+Date:	Tue Aug 26 19:55:23 2008 +0200
+
+    ppc4xx: NAND configuration
+
+    Made NAND bank configuration setting a config variable.
+
+    Signed-off-by: Wolfgang Ocker <weo@reccoware.de>
+    Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 5bc542a593abc9e974fbd34704af85c37c366c60
+Author: Victor Gallardo <vgallardo@amcc.com>
+Date:	Thu Aug 28 16:03:28 2008 -0700
+
+    ppc4xx: fix UIC external_interrupt hang on UIC0
+
+    This patch fixes a UIC external_interrupt hang if critical or non-critical
+    interrupt is set at the same time as a normal interrupt is set on UIC0.
+
+    Signed-off-by: Victor Gallardo <vgallardo@amcc.com>
+    Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 04737d5ffd16248cb80ab3dd4f3765057a803f18
+Author: Prodyut  Hazarika <phazarika@amcc.com>
+Date:	Wed Aug 27 16:39:00 2008 -0700
+
+    ppc4xx: Optimizations/Cleanups for IBM DDR2 Memory Controller
+
+    Removed Magic numbers from Initialization preload registers
+    Tested with Kilauea, Glacier, Canyonlands and Katmai boards
+    About 5-7% improvement seen for LMBench memtests
+
+    Signed-off-by: Prodyut Hazarika <phazarika@amcc.com>
+    Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 8a490422bed685c9491274ec997f62061d88620b
+Author: John Rigby <jrigby@freescale.com>
+Date:	Thu Aug 28 13:17:07 2008 -0600
+
+    ADS5121: Fix NOR and CPLD ALE timing for rev 2 silicon
+
+    MPC5121 rev 2 silicon has a new register for controlling how long
+    CS is asserted after deassertion of ALE in multiplexed mode.
+
+    The default is to assert CS together with ALE.  The alternative
+    is to assert CS (ALEN+1)*LPC_CLK clocks after deassertion of ALE.
+
+    The default is wrong for the NOR flash and CPLD on the ADS5121.
+
+    This patch turns on the alternative for CS0 (NOR) and CS2 (CPLD)
+    it does so conditionally based on silicon rev 2.0 or greater.
+
+    Signed-off-by: Martha J Marx <mmarx@silicontkx.com>
+    Signed-off-by: John Rigby <jrigby@freescale.com>
+
+commit 5d9a5efa4b332f442b54a755d49969123c3a8742
+Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+Date:	Tue Aug 19 00:56:46 2008 +0600
+
+    Add I2C frequency dividers for ColdFire
+
+    The existing I2C freqency dividers for FDR does not apply
+    to ColdFire platforms; thus, a seperate table is added
+    based on MCF5xxx Reference Manual
+
+    Signed-off-by: Luigi 'Comio' Mantellini <luigi.mantellini@idf-hit.com>
+    Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+    Acked-by: Tabi Timur <timur@freescale.com>
+
+commit eec567a67e00d1ed8d941e9098b7d421f4091abf
+Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+Date:	Tue Aug 19 03:01:19 2008 +0600
+
+    ColdFire: I2C fix for multiple platforms
+
+    Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+
+commit d53cf6a9c7423cba668b867978648645f71c3090
+Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+Date:	Tue Aug 19 00:37:13 2008 +0600
+
+    ColdFire: Add CONFIG_MII_INIT for M5272C3
+
+    Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+
+commit f78ced3028d4130b24a318943a70cf5584ab16f4
+Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+Date:	Tue Aug 19 00:26:25 2008 +0600
+
+    ColdFire: Multiple fixes for MCF5445x platforms
+
+    Add FEC pin set and mii reset in __mii_init(). Change
+    legacy flash vendor from 2 to AMD LEGACY (0xFFF0),
+    change cfi_offset to 0, and change CFG_FLASH_CFI to
+    CONFIG_FLASH_CFI_LEGACY. Correct M54451EVB and
+    M54455EVB env settings in configuration file.
+
+    Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+
+commit 454e725b3a9537b7f273bbd0cbca180f23a7a6e8
+Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+Date:	Fri Aug 15 18:24:25 2008 +0000
+
+    ColdFire: Change the SDRAM BRD2WT timing from 3 to 7
+
+    The user manuals recommend 7.
+
+    Signed-off-by: Kurt Mahan <kmahan@freescale.com>
+    Acked-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+
+commit 79e0799cf6e88d98d77b216a55234bf674b59a4e
+Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+Date:	Fri Aug 15 16:50:07 2008 +0000
+
+    ColdFire: Raise uart baudrate to 115200 bps
+
+    M5249EVB, M5271EVB, M5272C3, M5275EVB and M5282EVB platforms
+    uart baudrate increase from 19200 to 115200 bps
+
+    Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+
+commit ab6ba842682552ccf071d0034da0a20633d1d1ac
+Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+Date:	Wed Aug 13 12:07:03 2008 +0000
+
+    ColdFire: Fix board.c warning message
+
+    Implicit declaration of nand_init() warning message
+
+    Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+
+commit 5798b1c4650e9a8713c95b25c1e669a2bc80a97b
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date:	Wed Aug 27 01:10:34 2008 -0500
+
+    FSL DDR: Remove duplicate setting of cs0_bnds register on 86xx.
+
+    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 258c37b147353bc522ffc33dfbd7d0d9cd7c32d7
+Author: Heiko Schocher <hs@denx.de>
+Date:	Thu Aug 21 20:44:49 2008 +0200
+
+    mpc52xx: added support for the MPC5200 based MUC.MC52 board from MAN.
+
+    Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit 9cff4448a9cb882defe6c8bde73b77fc0c636799
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date:	Tue Aug 19 14:46:36 2008 -0500
+
+    mpc85xx: remove redudant code with lib_ppc/interrupts.c
+
+    For some reason we duplicated the majority of code in lib_ppc/interrupts.c
+    not show how that happened, but there is no good reason for it.
+
+    Use the interrupt_init_cpu() and timer_interrupt_cpu() since its why
+    they exist.
+
+    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 9490a7f1a9484617bad75c60807ce02c8a3a6d56
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date:	Fri Jul 25 13:31:05 2008 -0500
+
+    mpc85xx: Add support for the MPC8536DS reference board
+
+    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+    Signed-off-by: Srikanth Srinivasan <srikanth.srinivasan@freescale.com>
+    Signed-off-by: Dejan Minic <minic@freescale.com>
+    Signed-off-by: Jason Jin <Jason.jin@freescale.com>
+    Signed-off-by: Dave Liu <daveliu@freescale.com>
+    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit ef50d6c06ece74fb17e8d7510e62cad9df8b810d
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date:	Tue Aug 12 11:14:19 2008 -0500
+
+    mpc85xx: Add support for the MPC8536
+
+    The MPC8536 Adds SDHC and SATA controllers to the PQ3 family.  We
+    also have SERDES init code for the 8536.
+
+    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+    Signed-off-by: Srikanth Srinivasan <srikanth.srinivasan@freescale.com>
+    Signed-off-by: Dejan Minic <minic@freescale.com>
+    Signed-off-by: Jason Jin <Jason.jin@freescale.com>
+    Signed-off-by: Dave Liu <daveliu@freescale.com>
+
+commit 129ba616b3813dde861f25f3d8a3c47c5c36ad5f
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date:	Tue Aug 12 11:13:08 2008 -0500
+
+    mpc85xx: Add support for the MPC8572DS reference board
+
+    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 457caecdbca3df21a93abff19eab12dbc61b7897
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date:	Wed Aug 27 01:05:35 2008 -0500
+
+    FSL DDR: Remove old SPD support from cpu/mpc85xx
+
+    All 85xx boards have been converted to the new code so we can
+    remove the old SPD DDR setup code.
+
+    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 0e7927db138976469e7257e29c1338050a50fcd9
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date:	Wed Aug 27 01:04:07 2008 -0500
+
+    FSL DDR: Convert STXSSA to new DDR code.
+
+    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit c360d9b970fbb9c13744c355879671165bbb9b9e
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date:	Wed Aug 27 01:03:42 2008 -0500
+
+    FSL DDR: Convert STXGP3 to new DDR code.
+
+    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 8e55313b7ae12352a343f9b9962e662dbd897187
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date:	Tue Aug 26 23:52:58 2008 -0500
+
+    FSL DDR: Convert SBC8560 to new DDR code.
+
+    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 9658bec2e8f55d56ca1be70090ce5a348be4980f
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date:	Tue Aug 26 23:52:32 2008 -0500
+
+    FSL DDR: Convert MPC8540EVAL to new DDR code.
+
+    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 6bfa8f723cfd82c55e3ef5620ade396916470a70
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date:	Tue Aug 26 23:52:07 2008 -0500
+
+    FSL DDR: Convert PM856 to new DDR code.
+
+    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit d53bd3e17bd4f460257c19255569ea6dcfaae817
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date:	Tue Aug 26 23:51:49 2008 -0500
+
+    FSL DDR: Convert PM854 to new DDR code.
+
+    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 33b9079ba20926f14238fff863b68a98e938948e
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date:	Tue Aug 26 23:15:28 2008 -0500
+
+    FSL DDR: Convert sbc8548 to new DDR code.
+
+    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit a947e4c7eb15cea1d9fb633955c516aab5ad35dd
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date:	Tue Aug 26 23:14:14 2008 -0500
+
+    FSL DDR: Convert atum8548 to new DDR code.
+
+    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit be0bd8234b9777ecd63c4c686f72af070d886517
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date:	Tue Aug 26 22:56:56 2008 -0500
+
+    FSL DDR: Convert socrates to new DDR code.
+
+    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 1167a2fd56138b716e01370c4267f3b70bf9ffa0
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date:	Tue Aug 26 08:02:30 2008 -0500
+
+    FSL DDR: Convert MPC8544DS to new DDR code.
+
+    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit e6f5b35b41ddbd637bb9ca4ad985b1e0b07dae0e
+Author: Jon Loeliger <jdl@freescale.com>
+Date:	Tue Mar 18 13:51:05 2008 -0500
+
+    FSL DDR: Convert MPC8568MDS to new DDR code.
+
+    Signed-off-by: Jon Loeliger <jdl@freescale.com>
+    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit e31d2c1e2bc954dc32e33bb2076139f85b95f8e6
+Author: Jon Loeliger <jdl@freescale.com>
+Date:	Tue Mar 18 13:51:06 2008 -0500
+
+    FSL DDR: Convert MPC8548CDS to new DDR code.
+
+    Signed-off-by: Jon Loeliger <jdl@freescale.com>
+    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit aa11d85cf318b961e029fe50d68ca47d004bce93
+Author: Jon Loeliger <jdl@freescale.com>
+Date:	Mon Mar 17 15:48:18 2008 -0500
+
+    FSL DDR: Convert MPC8541CDS to new DDR code.
+
+    Signed-off-by: Jon Loeliger <jdl@freescale.com>
+    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 2b40edb10d81da7bba724edbccd7f53777112579
+Author: Jon Loeliger <jdl@freescale.com>
+Date:	Tue Mar 18 11:12:42 2008 -0500
+
+    FSL DDR: Convert MPC8555ADS to new DDR code.
+
+    Signed-off-by: Jon Loeliger <jdl@freescale.com>
+    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 8b625114e8bc5a6b436181167a6e7fcd3303dd2c
+Author: Jon Loeliger <jdl@freescale.com>
+Date:	Tue Mar 18 11:12:44 2008 -0500
+
+    FSL DDR: Convert MPC8560ADS to new DDR code.
+
+    Signed-off-by: Jon Loeliger <jdl@freescale.com>
+    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 9617c8d49a21703eaf13a4033ab1a56eecc033cc
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date:	Fri Jun 6 13:12:18 2008 -0500
+
+    FSL DDR: Convert MPC8540ADS to new DDR code.
+
+    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 2a6c2d7ab2a66660f40a6cd3de2eb29ee29d9693
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date:	Tue Aug 26 21:34:55 2008 -0500
+
+    FSL DDR: Add 85xx specific register setting
+
+    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 6fb1b7346849ccd0c20306143e334f5b76143070
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date:	Mon Jun 9 11:07:46 2008 -0500
+
+    FSL DDR: Add e500 TLB helper for DDR code
+
+    Provide a helper function that board code can call to map TLBs when
+    setting up DDR.
+
+    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit d26b739afe5a6760bd345743188759cd9d0f3b47
+Author: Andrew Dyer <adyer@righthandtech.com>
+Date:	Tue Aug 26 17:03:38 2008 -0500
+
+    dm9000 remove dead external phy support, gpio fix
+
+    dm9000 has code to detect and initialize external phy parts, but later
+    on in the code the part is forced to use the internal phy
+    unconditionally.  Remove the unused/untested code.
+
+    change the GPIO initialization so that only the GPIO used as an
+    internal phy reset (hardwired in the chip) is set as an output.  The
+    remaining GPIO need to be handled by board specific code to prevent
+    possible drive conflicts.  Set as inputs for safety.
+
+    replace a few magic numbers with defines
+
+    Signed-off-by: Andrew Dyer <adyer@righthandtech.com>
+    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit a1573db0c07c8ba99e9c373bb07ecd6f59da672c
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date:	Tue Aug 26 11:17:48 2008 -0500
+
+    Standardize bootp, tftpboot, rarpboot, dhcp, and nfs command descriptions
+
+    cmd_net.c command descriptions were updated to describe the optional
+    hostIPaddr argument.  The dhcp command help message was also updated
+    to more closely reflect the other commands in cmd_net.c
+
+    Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 51dfe1382ebaf691485badfa0ea5e75b0710531b
+Author: Remy Bohmer <linux@bohmer.net>
+Date:	Wed Aug 20 11:30:28 2008 +0200
+
+    Fix bogus error message in the DHCP handler
+
+    The DHCP handler has 1 state that is not listed in this case, causing a
+    failure message when there is actually no failure.
+
+    Signed-off-by: Remy Bohmer <linux@bohmer.net>
+    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 61365501a0e2cae9c1df2818b7b5b3f52c450d18
+Author: Remy Bohmer <linux@bohmer.net>
+Date:	Wed Aug 20 11:30:27 2008 +0200
+
+    Fix compile error when CONFIG_BOOTP_RANDOM_DELAY is set.
+
+    The option CONFIG_BOOTP_RANDOM_DELAY does not compile, because of a
+    missing extern inside the net/bootp.h header
+
+    Signed-off-by: Remy Bohmer <linux@bohmer.net>
+    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 1803f7f91ff35ca402259065df7557107dcf28a2
+Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+Date:	Tue Aug 19 21:26:32 2008 +0000
+
+    ColdFire: Add FEC Buffer descriptors in SRAM
+
+    Add FEC Buffer descriptors and data buffer in SRAM for
+    faster execution and access.
+
+    Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 429be27ce195210d4b9decf9e867b9ca6155a87d
+Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+Date:	Thu Aug 21 23:55:11 2008 +0000
+
+    Fix ColdFire FEC warning messages
+
+    Types mismatch and implicit declaration of icache_invalid()
+    warning messages
+
+    Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 6a002171098e968bd5b362347d2831224fab6048
+Author: Ben Warren <biggerbadderben@gmail.com>
+Date:	Sat Jul 12 00:17:50 2008 -0700
+
+    Moved initialization of SKGE Ethernet driver to board code.
+
+    The only board using this driver is the SL8245 board.
+    Removed initialization for the driver from net/eth.c
+
+    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 8379f42bc745eb9e4ca551a30fd2d0a63f740d75
+Author: Ben Warren <biggerbadderben@gmail.com>
+Date:	Sat Jul 12 00:08:45 2008 -0700
+
+    Moved conditional compilation to Makefile for SK98 Ethernet driver
+
+    Brute-force removal of #ifdefs.  Didn't touch the code.
+    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 65d3d99c28dc363d15eaee78225ff643df499b97
+Author: Ben Warren <biggerbadderben@gmail.com>
+Date:	Fri Jul 11 23:42:19 2008 -0700
+
+    Moved initialization of ULI526X Ethernet driver to board code.
+
+    The only board using this driver is the Freescale MPC8610HPCD board.
+    Removed initialization for the driver from net/eth.c
+
+    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 914947313a710f5dcf06beaf7f2aa24f1ebcce4f
+Author: Ben Warren <biggerbadderben@gmail.com>
+Date:	Fri Jul 11 23:15:28 2008 -0700
+
+    Moved initialization of Blackfin EMAC Ethernet controller to board_eth_init()
+
+    Added board_eth_init() function to bf537-stamp board.
+    Removed initialization for the Blackin EMAC driver from net/eth.c
+
+    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit fc363ce35408f348cacced68505f3747a53e3d7c
+Author: Ben Warren <biggerbadderben@gmail.com>
+Date:	Wed Jul 9 01:04:19 2008 -0700
+
+    Moved initialization of GRETH Ethernet driver to CPU directory
+
+    Added a cpu_eth_init() function to leon2/leon3 CPU directories and
+    removed code from net/eth.c
+
+    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 86882b80771309bceb11c6accfd7f6f90ade8bfc
+Author: Ben Warren <biggerbadderben@gmail.com>
+Date:	Tue Aug 26 22:16:25 2008 -0700
+
+    Moved initialization of MCFFEC Ethernet driver to CPU directory
+
+    Added a cpu_eth_init() function to coldfire CPU directories and
+    removed code from net/eth.c
+
+    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit b31da88b9c160d80d42a59cbbb31e24f27184d5c
+Author: Ben Warren <biggerbadderben@gmail.com>
+Date:	Tue Aug 26 22:12:36 2008 -0700
+
+    Moved initialization of FSL_MCDMAFEC Ethernet driver to CPU directory
+
+    Added a cpu_eth_init() function to cpu/mcf547x_8x directory and
+    removed code from net/eth.c
+
+    Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit b5710d9974f6f0f3ddb4e67d6cccc262ab37049e
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date:	Tue Aug 26 15:01:38 2008 -0500
+
+    FSL DDR: Remove old SPD support from cpu/mpc86xx
+
+    All 86xx boards have been converted to the new code so we can
+    remove the old SPD DDR setup code.
+
+    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 9bd4e5911b750837515466bc7449087698b88e0e
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date:	Tue Aug 26 15:01:37 2008 -0500
+
+    FSL DDR: Convert SBC8641D to new DDR code.
+
+    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 39aa1a73483e1ac2bd56d5523abfc3970ee82c77
+Author: Jon Loeliger <jdl@freescale.com>
+Date:	Tue Aug 26 15:01:36 2008 -0500
+
+    FSL DDR: Convert MPC8610HPCD to new DDR code.
+
+    Signed-off-by: Jon Loeliger <jdl@freescale.com>
+    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 6a8e5692933e8e6d6e5ba7e594f49dd6d4c3a263
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date:	Tue Aug 26 15:01:35 2008 -0500
+
+    FSL DDR: Convert MPC8641HPCN to new DDR code.
+
+    Signed-off-by: Jon Loeliger <jdl@freescale.com>
+    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 46ff4f1100ea64a01d21cc008ce85ac15eb1821f
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date:	Tue Aug 26 15:01:34 2008 -0500
+
+    FSL DDR: Add 86xx specific register setting
+
+    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 233fdd502a6c227f476212b3097653ad48d7e254
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date:	Tue Aug 26 15:01:32 2008 -0500
+
+    FSL DDR: Add DDR2 DIMM paramter support
+
+    Compute DIMM parameters based upon the SPD information.
+
+    Signed-off-by: James Yang <James.Yang@freescale.com>
+    Signed-off-by: Jon Loeliger <jdl@freescale.com>
+    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 05c05a2363a6ac11e0e405926034546ffad71fad
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date:	Tue Aug 26 15:01:30 2008 -0500
+
+    FSL DDR: Add DDR1 DIMM paramter support
+
+    Compute DIMM parameters based upon the SPD information in spd.
+
+    Signed-off-by: James Yang <James.Yang@freescale.com>
+    Signed-off-by: Jon Loeliger <jdl@freescale.com>
+    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 58e5e9aff147e8c7e2bc1406bf9384f65f020ffa
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date:	Tue Aug 26 15:01:29 2008 -0500
+
+    FSL DDR: Rewrite the FSL mpc8xxx DDR controller setup code.
+
+    The main purpose of this rewrite it to be able to share the same
+    initialization code on all FSL PowerPC products that have DDR
+    controllers.  (83xx, 85xx, 86xx).
+
+    The code is broken up into the following steps:
+	GET_SPD
+	COMPUTE_DIMM_PARMS
+	COMPUTE_COMMON_PARMS
+	GATHER_OPTS
+	ASSIGN_ADDRESSES
+	COMPUTE_REGS
+	PROGRAM_REGS
+
+    This allows us to share more code an easily allow for board specific code
+    overrides.
+
+    Additionally this code base adds support for >4G of DDR and provides a
+    foundation for supporting interleaving on processors with more than one
+    controller.
+
+    Signed-off-by: James Yang <James.Yang@freescale.com>
+    Signed-off-by: Jon Loeliger <jdl@freescale.com>
+    Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
+    Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
+    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit f784e32b4bce0013983506b11af4b85b8ca3d36e
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date:	Tue Aug 26 15:01:28 2008 -0500
+
+    FSL DDR: Provide a generic set_ddr_laws()
+
+    Provide a helper function that will setup the last available
+    LAWs (upto 2) for DDR.  Useful for SPD/dyanmic DDR setting code.
+
+    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 0f2cbe3f5eddbdf3848265f35e4f714434929cff
+Author: James Yang <James.Yang@freescale.com>
+Date:	Tue Aug 26 15:01:27 2008 -0500
+
+    Add proper SPD definitions for DDR1/2/3
+
+    Also adds helper functions for DDR1/2 to verify the checksum.
+
+    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 285db74716c724ae8a0ff177878fd09a74428c7b
+Author: Wolfgang Denk <wd@denx.de>
+Date:	Wed Aug 27 01:02:48 2008 +0200
+
+    Update CHANGELOG
+
+    Signed-off-by: Wolfgang Denk <wd@denx.de>
+
 commit adf22b66d8bf05bd46e098cf71e6dca29b30aa7b
 Author: Heiko Schocher <hs@denx.de>
 Date:	Tue Aug 19 10:08:49 2008 +0200
diff --git a/CREDITS b/CREDITS
index 4fe4e63f0..9ddf0d28a 100644
--- a/CREDITS
+++ b/CREDITS
@@ -405,7 +405,9 @@ D: Atmel AT91CAP9ADK support
 
 N: Ricardo Ribalda Delgado
 E: ricardo.ribalda@uam.es
-D: PPC440x5 (Virtex5), ML507 Board, eeprom_simul, adt7460
+D: PPC440x5 (Virtex5), ML507 Board, eeprom_simul, adt7460, v5fx30teval
+D: Virtex ppc440 generic architecture
+D: Virtex ppc405 generic architecture
 W: http://www.ii.uam.es/~rribalda
 
 N: Stefan Roese
diff --git a/MAINTAINERS b/MAINTAINERS
index 3f16dabf5..f04879555 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -4,7 +4,7 @@
 #									#
 # For any board without permanent maintainer, please contact		#
 #	Wolfgang Denk <wd@denx.de>					#
-# and Cc: the <U-Boot-Users@lists.sourceforge.net> mailing lists.	#
+# and Cc: the <u-boot@lists.denx.de> mailing list.			#
 #									#
 # Note: lists sorted by Maintainer Name					#
 #########################################################################
@@ -130,6 +130,10 @@ Jon Diekema <jon.diekema@smiths-aerospace.com>
 
 	sbc8260		MPC8260
 
+Dirk Eibach <eibach@gdsys.de>
+
+	neo		PPC405EP
+
 Dave Ellis <DGE@sixnetio.com>
 
 	SXNI855T	MPC8xx
@@ -314,6 +318,9 @@ Daniel Poirot <dan.poirot@windriver.com>
 Ricardo Ribalda <ricardo.ribalda@uam.es>
 
 	ml507 		PPC440x5
+	v5fx30teval	PPC440x5
+	xilinx-ppc405-generic	PPC405
+	xilinx-ppc440-generic	PPC440x5
 
 Stefan Roese <sr@denx.de>
 
@@ -359,6 +366,10 @@ Travis Sawyer (travis.sawyer@sandburst.com>
 	METROBOX	PPC440GX
 	XPEDITE1K	PPC440GX
 
+Georg Schardt <schardt@team-ctech.de>
+
+	fx12mm		PPC405
+
 Heiko Schocher <hs@denx.de>
 
 	ids8247		MPC8247
@@ -592,6 +603,10 @@ Greg Ungerer <greg.ungerer@opengear.com>
 	cm4116		ks8695p
 	cm4148		ks8695p
 
+Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
+
+	SFFSDR		ARM926EJS
+
 Richard Woodruff <r-woodruff2@ti.com>
 
 	omap2420h4	ARM1136EJS
@@ -601,6 +616,10 @@ Alex Züpke <azu@sysgo.de>
 	lart		SA1100
 	dnp1110		SA1110
 
+Sergey Lapin <slapin@ossfans.org>
+
+	afeb9260	ARM926EJS (AT91SAM9260 SoC)
+
 -------------------------------------------------------------------------
 
 Unknown / orphaned boards:
@@ -685,7 +704,6 @@ Yasushi Shoji <yashi@atmark-techno.com>
 Michal Simek <monstr@monstr.eu>
 
 	ML401		MicroBlaze
-	XUPV2P		MicroBlaze
 
 #########################################################################
 # Coldfire Systems:							#
@@ -707,6 +725,7 @@ TsiChung Liew <Tsi-Chung.Liew@freescale.com>
 	M52277EVB	mcf5227x
 	M5235EVB	mcf52x2
 	M5253DEMO	mcf52x2
+	M53017EVB	mcf532x
 	M5329EVB	mcf532x
 	M5373EVB	mcf532x
 	M54455EVB	mcf5445x
diff --git a/MAKEALL b/MAKEALL
index fe284b5ee..cc49a9808 100755
--- a/MAKEALL
+++ b/MAKEALL
@@ -1,6 +1,15 @@
 #!/bin/sh
 
-: ${JOBS:=}
+# Determine number of CPU cores if no default was set
+: ${BUILD_NCPUS:="`getconf _NPROCESSORS_ONLN`"}
+
+if [ "$BUILD_NCPUS" -gt 1 ]
+then
+	JOBS=-j`expr "$BUILD_NCPUS" + 1`
+else
+	JOBS=""
+fi
+
 
 if [ "${CROSS_COMPILE}" ] ; then
 	MAKE="make CROSS_COMPILE=${CROSS_COMPILE}"
@@ -161,6 +170,7 @@ LIST_4xx="		\
 	alpr		\
 	AP1000		\
 	AR405		\
+	arches		\
 	ASH405		\
 	bamboo		\
 	bamboo_nand	\
@@ -185,6 +195,7 @@ LIST_4xx="		\
 	ebony		\
 	ERIC		\
 	EXBITGEN	\
+	fx12mm		\
 	G2000		\
 	glacier		\
 	haleakala	\
@@ -210,6 +221,7 @@ LIST_4xx="		\
 	ml300		\
 	ml507		\
 	ml507_flash	\
+	neo		\
 	ocotea		\
 	OCRTC		\
 	ORSG		\
@@ -230,12 +242,16 @@ LIST_4xx="		\
 	sequoia_nand	\
 	taihu		\
 	taishan		\
+	v5fx30teval	\
+	v5fx30teval_flash \
 	VOH405		\
 	VOM405		\
 	W7OLMC		\
 	W7OLMG		\
 	walnut		\
 	WUH405		\
+	xilinx-ppc440-generic \
+	xilinx-ppc440-generic_flash \
 	XPEDITE1K	\
 	yellowstone	\
 	yosemite	\
@@ -320,7 +336,7 @@ LIST_8260="		\
 
 LIST_83xx="		\
 	MPC8313ERDB_33	\
-	MPC8313ERDB_66	\
+	MPC8313ERDB_NAND_66	\
 	MPC8315ERDB	\
 	MPC8323ERDB	\
 	MPC832XEMDS	\
@@ -527,6 +543,7 @@ LIST_ARM11="		\
 #########################################################################
 
 LIST_at91="		\
+	afeb9260	\
 	at91cap9adk	\
 	at91rm9200dk	\
 	at91sam9260ek	\
@@ -681,7 +698,6 @@ LIST_nios2="		\
 LIST_microblaze="	\
 	ml401		\
 	suzaku		\
-	xupv2p		\
 "
 
 #########################################################################
@@ -702,6 +718,7 @@ LIST_coldfire="			\
 	M5272C3			\
 	M5275EVB		\
 	M5282EVB		\
+	M53017EVB		\
 	M5329AFEE		\
 	M5373EVB		\
 	M54451EVB		\
diff --git a/Makefile b/Makefile
index 2d4b51316..4df48129b 100644
--- a/Makefile
+++ b/Makefile
@@ -21,11 +21,16 @@
 # MA 02111-1307 USA
 #
 
-VERSION = 1
-PATCHLEVEL = 3
-SUBLEVEL = 4
-EXTRAVERSION =
+VERSION = 2009
+PATCHLEVEL = 01
+SUBLEVEL =
+EXTRAVERSION = -rc1
+ifneq "$(SUBLEVEL)" ""
 U_BOOT_VERSION = $(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION)
+else
+U_BOOT_VERSION = $(VERSION).$(PATCHLEVEL)$(EXTRAVERSION)
+endif
+TIMESTAMP_FILE = $(obj)include/timestamp_autogenerated.h
 VERSION_FILE = $(obj)include/version_autogenerated.h
 
 HOSTARCH := $(shell uname -m | \
@@ -40,7 +45,12 @@ HOSTARCH := $(shell uname -m | \
 HOSTOS := $(shell uname -s | tr '[:upper:]' '[:lower:]' | \
 	    sed -e 's/\(cygwin\).*/cygwin/')
 
-export	HOSTARCH HOSTOS
+# Set shell to bash if possible, otherwise fall back to sh
+SHELL := $(shell if [ -x "$$BASH" ]; then echo $$BASH; \
+	else if [ -x /bin/bash ]; then echo /bin/bash; \
+	else echo sh; fi; fi)
+
+export	HOSTARCH HOSTOS SHELL
 
 # Deal with colliding definitions from tcsh etc.
 VENDOR=
@@ -199,6 +209,7 @@ endif
 OBJS := $(addprefix $(obj),$(OBJS))
 
 LIBS  = lib_generic/libgeneric.a
+LIBS += lib_generic/lzma/liblzma.a
 LIBS += $(shell if [ -f board/$(VENDOR)/common/Makefile ]; then echo \
 	"board/$(VENDOR)/common/lib$(VENDOR).a"; fi)
 LIBS += cpu/$(CPU)/lib$(CPU).a
@@ -216,6 +227,7 @@ LIBS += disk/libdisk.a
 LIBS += drivers/bios_emulator/libatibiosemu.a
 LIBS += drivers/block/libblock.a
 LIBS += drivers/dma/libdma.a
+LIBS += drivers/fpga/libfpga.a
 LIBS += drivers/hwmon/libhwmon.a
 LIBS += drivers/i2c/libi2c.a
 LIBS += drivers/input/libinput.a
@@ -225,6 +237,7 @@ LIBS += drivers/mtd/libmtd.a
 LIBS += drivers/mtd/nand/libnand.a
 LIBS += drivers/mtd/nand_legacy/libnand_legacy.a
 LIBS += drivers/mtd/onenand/libonenand.a
+LIBS += drivers/mtd/ubi/libubi.a
 LIBS += drivers/mtd/spi/libspi_flash.a
 LIBS += drivers/net/libnet.a
 LIBS += drivers/net/phy/libphy.a
@@ -238,9 +251,11 @@ endif
 ifeq ($(CPU),mpc85xx)
 LIBS += drivers/qe/qe.a
 LIBS += cpu/mpc8xxx/ddr/libddr.a
+TAG_SUBDIRS += cpu/mpc8xxx
 endif
 ifeq ($(CPU),mpc86xx)
 LIBS += cpu/mpc8xxx/ddr/libddr.a
+TAG_SUBDIRS += cpu/mpc8xxx
 endif
 LIBS += drivers/rtc/librtc.a
 LIBS += drivers/serial/libserial.a
@@ -252,7 +267,7 @@ LIBS += api/libapi.a
 LIBS += post/libpost.a
 
 LIBS := $(addprefix $(obj),$(LIBS))
-.PHONY : $(LIBS) $(VERSION_FILE)
+.PHONY : $(LIBS) $(TIMESTAMP_FILE) $(VERSION_FILE)
 
 LIBBOARD = board/$(BOARDDIR)/lib$(BOARD).a
 LIBBOARD := $(addprefix $(obj),$(LIBBOARD))
@@ -295,7 +310,7 @@ $(obj)u-boot.hex:	$(obj)u-boot
 		$(OBJCOPY) ${OBJCFLAGS} -O ihex $< $@
 
 $(obj)u-boot.srec:	$(obj)u-boot
-		$(OBJCOPY) ${OBJCFLAGS} -O srec $< $@
+		$(OBJCOPY) -O srec $< $@
 
 $(obj)u-boot.bin:	$(obj)u-boot
 		$(OBJCOPY) ${OBJCFLAGS} -O binary $< $@
@@ -344,13 +359,13 @@ $(SUBDIRS):	depend $(obj)include/autoconf.mk
 $(LDSCRIPT):	depend $(obj)include/autoconf.mk
 		$(MAKE) -C $(dir $@) $(notdir $@)
 
-$(NAND_SPL):	$(VERSION_FILE)	$(obj)include/autoconf.mk
+$(NAND_SPL):	$(TIMESTAMP_FILE) $(VERSION_FILE) $(obj)include/autoconf.mk
 		$(MAKE) -C nand_spl/board/$(BOARDDIR) all
 
 $(U_BOOT_NAND):	$(NAND_SPL) $(obj)u-boot.bin $(obj)include/autoconf.mk
 		cat $(obj)nand_spl/u-boot-spl-16k.bin $(obj)u-boot.bin > $(obj)u-boot-nand.bin
 
-$(ONENAND_IPL):	$(VERSION_FILE)	$(obj)include/autoconf.mk
+$(ONENAND_IPL):	$(TIMESTAMP_FILE) $(VERSION_FILE) $(obj)include/autoconf.mk
 		$(MAKE) -C onenand_ipl/board/$(BOARDDIR) all
 
 $(U_BOOT_ONENAND):	$(ONENAND_IPL) $(obj)u-boot.bin $(obj)include/autoconf.mk
@@ -359,10 +374,13 @@ $(U_BOOT_ONENAND):	$(ONENAND_IPL) $(obj)u-boot.bin $(obj)include/autoconf.mk
 
 $(VERSION_FILE):
 		@( printf '#define U_BOOT_VERSION "U-Boot %s%s"\n' "$(U_BOOT_VERSION)" \
-		 '$(shell $(CONFIG_SHELL) $(TOPDIR)/tools/setlocalversion $(TOPDIR))' \
-		 ) > $@.tmp
+		 '$(shell $(TOPDIR)/tools/setlocalversion $(TOPDIR))' ) > $@.tmp
 		@cmp -s $@ $@.tmp && rm -f $@.tmp || mv -f $@.tmp $@
 
+$(TIMESTAMP_FILE):
+		@date +'#define U_BOOT_DATE "%b %d %C%y"' > $@
+		@date +'#define U_BOOT_TIME "%T"' >> $@
+
 gdbtools:
 		$(MAKE) -C tools/gdb all || exit 1
 
@@ -372,7 +390,7 @@ updater:
 env:
 		$(MAKE) -C tools/env all MTD_VERSION=${MTD_VERSION} || exit 1
 
-depend dep:	$(VERSION_FILE)
+depend dep:	$(TIMESTAMP_FILE) $(VERSION_FILE)
 		for dir in $(SUBDIRS) ; do $(MAKE) -C $$dir _depend ; done
 
 TAG_SUBDIRS += include
@@ -445,7 +463,8 @@ $(obj)include/autoconf.mk: $(obj)include/config.h
 	set -e ; \
 	: Extract the config macros ; \
 	$(CPP) $(CFLAGS) -DDO_DEPS_ONLY -dM include/common.h | \
-		sed -n -f tools/scripts/define2mk.sed > $@
+		sed -n -f tools/scripts/define2mk.sed > $@.tmp && \
+	mv $@.tmp $@
 
 sinclude $(obj)include/autoconf.mk.dep
 
@@ -453,7 +472,7 @@ sinclude $(obj)include/autoconf.mk.dep
 else	# !config.mk
 all $(obj)u-boot.hex $(obj)u-boot.srec $(obj)u-boot.bin \
 $(obj)u-boot.img $(obj)u-boot.dis $(obj)u-boot \
-$(SUBDIRS) $(VERSION_FILE) gdbtools updater env depend \
+$(SUBDIRS) $(TIMESTAMP_FILE) $(VERSION_FILE) gdbtools updater env depend \
 dep tags ctags etags cscope $(obj)System.map:
 	@echo "System not configured - see README" >&2
 	@ exit 1
@@ -917,7 +936,7 @@ MBX860T_config:	unconfig
 	@$(MKCONFIG) $(@:_config=) ppc mpc8xx mbx8xx
 
 mgsuvd_config:		unconfig
-	@$(MKCONFIG) $(@:_config=) ppc mpc8xx mgsuvd
+	@$(MKCONFIG) $(@:_config=) ppc mpc8xx mgsuvd keymile
 
 MHPC_config:		unconfig
 	@$(MKCONFIG) $(@:_config=) ppc mpc8xx mhpc eltec
@@ -1059,7 +1078,7 @@ RPXlite_DW_config:	unconfig
 		  $(XECHO) "... with LCD display ..."; \
 		}
 	@[ -z "$(findstring _NVRAM,$@)" ] || \
-		{ echo "#define  CFG_ENV_IS_IN_NVRAM"	>>$(obj)include/config.h ; \
+		{ echo "#define  CONFIG_ENV_IS_IN_NVRAM"	>>$(obj)include/config.h ; \
 		  $(XECHO) "... with ENV in NVRAM ..."; \
 		}
 	@$(MKCONFIG) -a RPXlite_DW ppc mpc8xx RPXlite_dw
@@ -1201,7 +1220,8 @@ bubinga_config:	unconfig
 CANBT_config:	unconfig
 	@$(MKCONFIG) $(@:_config=) ppc ppc4xx canbt esd
 
-# Canyonlands & Glacier use different U-Boot images
+# Arches, Canyonlands & Glacier use different U-Boot images
+arches_config \
 canyonlands_config \
 glacier_config:	unconfig
 	@mkdir -p $(obj)include
@@ -1242,12 +1262,12 @@ CMS700_config:	unconfig
 CPCI2DP_config:	unconfig
 	@$(MKCONFIG) $(@:_config=) ppc ppc4xx cpci2dp esd
 
-CPCI405_config	\
-CPCI4052_config	\
+CPCI405_config		\
+CPCI4052_config		\
 CPCI405DT_config	\
 CPCI405AB_config:	unconfig
+	@mkdir -p $(obj)board/esd/cpci405
 	@$(MKCONFIG) $(@:_config=) ppc ppc4xx cpci405 esd
-	@echo "BOARD_REVISION = $(@:_config=)"	>> $(obj)include/config.mk
 
 CPCIISER4_config:	unconfig
 	@$(MKCONFIG) $(@:_config=) ppc ppc4xx cpciiser4 esd
@@ -1282,6 +1302,24 @@ ERIC_config:	unconfig
 EXBITGEN_config:	unconfig
 	@$(MKCONFIG) $(@:_config=) ppc ppc4xx exbitgen
 
+fx12mm_flash_config: unconfig
+	@mkdir -p $(obj)include $(obj)board/xilinx/ppc405-generic
+	@mkdir -p $(obj)include $(obj)board/avnet/fx12mm
+	@echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc405-generic/u-boot-rom.lds"\
+		> $(obj)board/avnet/fx12mm/config.tmp
+	@echo "TEXT_BASE := 0xFFCB0000" \
+		>> $(obj)board/avnet/fx12mm/config.tmp
+	@$(MKCONFIG) fx12mm ppc ppc4xx fx12mm avnet
+
+fx12mm_config: unconfig
+	@mkdir -p $(obj)include $(obj)board/xilinx/ppc405-generic
+	@mkdir -p $(obj)include $(obj)board/avnet/fx12mm
+	@echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc405-generic/u-boot-ram.lds"\
+		> $(obj)board/avnet/fx12mm/config.tmp
+	@echo "TEXT_BASE := 0x03000000" \
+		>> $(obj)board/avnet/fx12mm/config.tmp
+	@$(MKCONFIG) fx12mm ppc ppc4xx fx12mm avnet
+
 G2000_config:	unconfig
 	@$(MKCONFIG) $(@:_config=) ppc ppc4xx g2000
 
@@ -1356,16 +1394,26 @@ ML2_config:	unconfig
 ml300_config:	unconfig
 	@$(MKCONFIG) $(@:_config=) ppc ppc4xx ml300 xilinx
 
-ml507_flash_config:	unconfig
+ml507_flash_config: unconfig
+	@mkdir -p $(obj)include $(obj)board/xilinx/ppc440-generic
 	@mkdir -p $(obj)include $(obj)board/xilinx/ml507
-	@cp $(obj)board/xilinx/ml507/u-boot-rom.lds  $(obj)board/xilinx/ml507/u-boot.lds
-	@echo "TEXT_BASE = 0xFE360000" > $(obj)board/xilinx/ml507/config.tmp
-	@$(MKCONFIG) $(@:_flash_config=) ppc ppc4xx ml507 xilinx
-
-ml507_config:	unconfig
+	@echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc440-generic/u-boot-rom.lds"\
+		> $(obj)board/xilinx/ml507/config.tmp
+	@echo "TEXT_BASE := 0xFE360000" \
+		>> $(obj)board/xilinx/ml507/config.tmp
+	@$(MKCONFIG) ml507 ppc ppc4xx ml507 xilinx
+
+ml507_config: unconfig
+	@mkdir -p $(obj)include $(obj)board/xilinx/ppc440-generic
 	@mkdir -p $(obj)include $(obj)board/xilinx/ml507
-	@cp $(obj)board/xilinx/ml507/u-boot-ram.lds  $(obj)board/xilinx/ml507/u-boot.lds
-	@$(MKCONFIG) $(@:_config=) ppc ppc4xx ml507 xilinx
+	@echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc440-generic/u-boot-ram.lds"\
+		> $(obj)board/xilinx/ml507/config.tmp
+	@echo "TEXT_BASE := 0x04000000"  \
+		>> $(obj)board/xilinx/ml507/config.tmp
+	@$(MKCONFIG) ml507 ppc ppc4xx ml507 xilinx
+
+neo_config:	unconfig
+	@$(MKCONFIG) $(@:_config=) ppc ppc4xx neo gdsys
 
 ocotea_config:	unconfig
 	@$(MKCONFIG) $(@:_config=) ppc ppc4xx ocotea amcc
@@ -1461,6 +1509,24 @@ taihu_config:	unconfig
 taishan_config:	unconfig
 	@$(MKCONFIG) $(@:_config=) ppc ppc4xx taishan amcc
 
+v5fx30teval_config: unconfig
+	@mkdir -p $(obj)include $(obj)board/xilinx/ppc440-generic
+	@mkdir -p $(obj)include $(obj)board/avnet/v5fx30teval
+	@echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc440-generic/u-boot-ram.lds"\
+		> $(obj)board/avnet/v5fx30teval/config.tmp
+	@echo "TEXT_BASE := 0x03000000" \
+		>> $(obj)board/avnet/v5fx30teval/config.tmp
+	@$(MKCONFIG) v5fx30teval ppc ppc4xx v5fx30teval avnet
+
+v5fx30teval_flash_config: unconfig
+	@mkdir -p $(obj)include $(obj)board/xilinx/ppc440-generic
+	@mkdir -p $(obj)include $(obj)board/avnet/v5fx30teval
+	@echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc440-generic/u-boot-rom.lds"\
+		> $(obj)board/avnet/v5fx30teval/config.tmp
+	@echo "TEXT_BASE := 0xFF1C0000" \
+		>> $(obj)board/avnet/v5fx30teval/config.tmp
+	@$(MKCONFIG) v5fx30teval ppc ppc4xx v5fx30teval avnet
+
 VOH405_config:	unconfig
 	@$(MKCONFIG) $(@:_config=) ppc ppc4xx voh405 esd
 
@@ -1479,6 +1545,38 @@ sycamore_config: unconfig
 WUH405_config:	unconfig
 	@$(MKCONFIG) $(@:_config=) ppc ppc4xx wuh405 esd
 
+xilinx-ppc405-generic_flash_config: unconfig
+	@mkdir -p $(obj)include $(obj)board/xilinx/ppc405-generic
+	@echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc405-generic/u-boot-rom.lds"\
+		> $(obj)board/xilinx/ppc405-generic/config.tmp
+	@echo "TEXT_BASE := 0xFE360000" \
+		>> $(obj)board/xilinx/ppc405-generic/config.tmp
+	@$(MKCONFIG) xilinx-ppc405-generic ppc ppc4xx ppc405-generic xilinx
+
+xilinx-ppc405-generic_config: unconfig
+	@mkdir -p $(obj)include $(obj)board/xilinx/ppc405-generic
+	@echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc405-generic/u-boot-ram.lds"\
+		> $(obj)board/xilinx/ppc405-generic/config.tmp
+	@echo "TEXT_BASE := 0x04000000" \
+		>> $(obj)board/xilinx/ppc405-generic/config.tmp
+	@$(MKCONFIG) xilinx-ppc405-generic ppc ppc4xx ppc405-generic xilinx
+
+xilinx-ppc440-generic_flash_config: unconfig
+	@mkdir -p $(obj)include $(obj)board/xilinx/ppc440-generic
+	@echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc440-generic/u-boot-rom.lds"\
+		> $(obj)board/xilinx/ppc440-generic/config.tmp
+	@echo "TEXT_BASE := 0xFE360000" \
+		>> $(obj)board/xilinx/ppc440-generic/config.tmp
+	@$(MKCONFIG) xilinx-ppc440-generic ppc ppc4xx ppc440-generic xilinx
+
+xilinx-ppc440-generic_config: unconfig
+	@mkdir -p $(obj)include $(obj)board/xilinx/ppc440-generic
+	@echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc440-generic/u-boot-ram.lds"\
+		> $(obj)board/xilinx/ppc440-generic/config.tmp
+	@echo "TEXT_BASE := 0x04000000" \
+		>> $(obj)board/xilinx/ppc440-generic/config.tmp
+	@$(MKCONFIG) xilinx-ppc440-generic ppc ppc4xx ppc440-generic xilinx
+
 XPEDITE1K_config:	unconfig
 	@$(MKCONFIG) $(@:_config=) ppc ppc4xx xpedite1k
 
@@ -1652,12 +1750,12 @@ ISPAN_config		\
 ISPAN_REVB_config:	unconfig
 	@mkdir -p $(obj)include
 	@if [ "$(findstring _REVB_,$@)" ] ; then \
-		echo "#define CFG_REV_B" > $(obj)include/config.h ; \
+		echo "#define CONFIG_SYS_REV_B" > $(obj)include/config.h ; \
 	fi
 	@$(MKCONFIG) -a ISPAN ppc mpc8260 ispan
 
 mgcoge_config	:	unconfig
-	@$(MKCONFIG) mgcoge ppc mpc8260 mgcoge
+	@$(MKCONFIG) mgcoge ppc mpc8260 mgcoge keymile
 
 MPC8260ADS_config	\
 MPC8260ADS_lowboot_config	\
@@ -1679,8 +1777,8 @@ PQ2FADS-ZU_66MHz_lowboot_config	\
 	@mkdir -p $(obj)include
 	@mkdir -p $(obj)board/freescale/mpc8260ads
 	$(if $(findstring PQ2FADS,$@), \
-	@echo "#define CONFIG_ADSTYPE CFG_PQ2FADS" > $(obj)include/config.h, \
-	@echo "#define CONFIG_ADSTYPE CFG_"$(subst MPC,,$(word 1,$(subst _, ,$@))) > $(obj)include/config.h)
+	@echo "#define CONFIG_ADSTYPE CONFIG_SYS_PQ2FADS" > $(obj)include/config.h, \
+	@echo "#define CONFIG_ADSTYPE CONFIG_SYS_"$(subst MPC,,$(word 1,$(subst _, ,$@))) > $(obj)include/config.h)
 	$(if $(findstring MHz,$@), \
 	@echo "#define CONFIG_8260_CLKIN" $(subst MHz,,$(word 2,$(subst _, ,$@)))"000000" >> $(obj)include/config.h, \
 	$(if $(findstring VR,$@), \
@@ -1843,7 +1941,27 @@ ZPC1900_config: unconfig
 ## Coldfire
 #########################################################################
 
-M52277EVB_config:	unconfig
+M52277EVB_config \
+M52277EVB_spansion_config \
+M52277EVB_stmicro_config :	unconfig
+	@case "$@" in \
+	M52277EVB_config)		FLASH=SPANSION;; \
+	M52277EVB_spansion_config)	FLASH=SPANSION;; \
+	M52277EVB_stmicro_config)	FLASH=STMICRO;; \
+	esac; \
+	if [ "$${FLASH}" = "SPANSION" ] ; then \
+		echo "#define CONFIG_SYS_SPANSION_BOOT"	>> $(obj)include/config.h ; \
+		echo "TEXT_BASE = 0x00000000" > $(obj)board/freescale/m52277evb/config.tmp ; \
+		cp $(obj)board/freescale/m52277evb/u-boot.spa $(obj)board/freescale/m52277evb/u-boot.lds ; \
+		$(XECHO) "... with SPANSION boot..." ; \
+	fi; \
+	if [ "$${FLASH}" = "STMICRO" ] ; then \
+		echo "#define CONFIG_CF_SBF"	>> $(obj)include/config.h ; \
+		echo "#define CONFIG_SYS_STMICRO_BOOT"	>> $(obj)include/config.h ; \
+		echo "TEXT_BASE = 0x43E00000" > $(obj)board/freescale/m52277evb/config.tmp ; \
+		cp $(obj)board/freescale/m52277evb/u-boot.stm $(obj)board/freescale/m52277evb/u-boot.lds ; \
+		$(XECHO) "... with ST Micro boot..." ; \
+	fi
 	@$(MKCONFIG) -a M52277EVB m68k mcf5227x m52277evb freescale
 
 M5235EVB_config \
@@ -1903,6 +2021,9 @@ M5275EVB_config :		unconfig
 M5282EVB_config :		unconfig
 	@$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5282evb freescale
 
+M53017EVB_config :		unconfig
+	@$(MKCONFIG) $(@:_config=) m68k mcf532x m53017evb freescale
+
 M5329AFEE_config \
 M5329BFEE_config :	unconfig
 	@case "$@" in \
@@ -1932,19 +2053,19 @@ M54451EVB_stmicro_config :	unconfig
 	M54451EVB_stmicro_config)	FLASH=STMICRO;; \
 	esac; \
 	if [ "$${FLASH}" = "SPANSION" ] ; then \
-		echo "#define CFG_SPANSION_BOOT"	>> $(obj)include/config.h ; \
+		echo "#define CONFIG_SYS_SPANSION_BOOT"	>> $(obj)include/config.h ; \
 		echo "TEXT_BASE = 0x00000000" > $(obj)board/freescale/m54451evb/config.tmp ; \
 		cp $(obj)board/freescale/m54451evb/u-boot.spa $(obj)board/freescale/m54451evb/u-boot.lds ; \
 		$(XECHO) "... with SPANSION boot..." ; \
 	fi; \
 	if [ "$${FLASH}" = "STMICRO" ] ; then \
 		echo "#define CONFIG_CF_SBF"	>> $(obj)include/config.h ; \
-		echo "#define CFG_STMICRO_BOOT"	>> $(obj)include/config.h ; \
+		echo "#define CONFIG_SYS_STMICRO_BOOT"	>> $(obj)include/config.h ; \
 		echo "TEXT_BASE = 0x47E00000" > $(obj)board/freescale/m54451evb/config.tmp ; \
 		cp $(obj)board/freescale/m54451evb/u-boot.stm $(obj)board/freescale/m54451evb/u-boot.lds ; \
 		$(XECHO) "... with ST Micro boot..." ; \
 	fi; \
-	echo "#define CFG_INPUT_CLKSRC 24000000" >> $(obj)include/config.h ;
+	echo "#define CONFIG_SYS_INPUT_CLKSRC 24000000" >> $(obj)include/config.h ;
 	@$(MKCONFIG) -a M54451EVB m68k mcf5445x m54451evb freescale
 
 M54455EVB_config \
@@ -1966,25 +2087,25 @@ M54455EVB_stm33_config :	unconfig
 	M54455EVB_stm33_config)		FLASH=STMICRO; FREQ=33333333;; \
 	esac; \
 	if [ "$${FLASH}" = "INTEL" ] ; then \
-		echo "#define CFG_INTEL_BOOT" >> $(obj)include/config.h ; \
+		echo "#define CONFIG_SYS_INTEL_BOOT" >> $(obj)include/config.h ; \
 		echo "TEXT_BASE = 0x00000000" > $(obj)board/freescale/m54455evb/config.tmp ; \
 		cp $(obj)board/freescale/m54455evb/u-boot.int $(obj)board/freescale/m54455evb/u-boot.lds ; \
 		$(XECHO) "... with INTEL boot..." ; \
 	fi; \
 	if [ "$${FLASH}" = "ATMEL" ] ; then \
-		echo "#define CFG_ATMEL_BOOT"	>> $(obj)include/config.h ; \
+		echo "#define CONFIG_SYS_ATMEL_BOOT"	>> $(obj)include/config.h ; \
 		echo "TEXT_BASE = 0x04000000" > $(obj)board/freescale/m54455evb/config.tmp ; \
 		cp $(obj)board/freescale/m54455evb/u-boot.atm $(obj)board/freescale/m54455evb/u-boot.lds ; \
 		$(XECHO) "... with ATMEL boot..." ; \
 	fi; \
 	if [ "$${FLASH}" = "STMICRO" ] ; then \
 		echo "#define CONFIG_CF_SBF"	>> $(obj)include/config.h ; \
-		echo "#define CFG_STMICRO_BOOT"	>> $(obj)include/config.h ; \
+		echo "#define CONFIG_SYS_STMICRO_BOOT"	>> $(obj)include/config.h ; \
 		echo "TEXT_BASE = 0x4FE00000" > $(obj)board/freescale/m54455evb/config.tmp ; \
 		cp $(obj)board/freescale/m54455evb/u-boot.stm $(obj)board/freescale/m54455evb/u-boot.lds ; \
 		$(XECHO) "... with ST Micro boot..." ; \
 	fi; \
-	echo "#define CFG_INPUT_CLKSRC $${FREQ}" >> $(obj)include/config.h ; \
+	echo "#define CONFIG_SYS_INPUT_CLKSRC $${FREQ}" >> $(obj)include/config.h ; \
 	$(XECHO) "... with $${FREQ}Hz input clock"
 	@$(MKCONFIG) -a M54455EVB m68k mcf5445x m54455evb freescale
 
@@ -2004,20 +2125,20 @@ M5475GFE_config :	unconfig
 	M5475FFE_config)	BOOT=2;CODE=32;VID=1;USB=1;RAM=64;RAM1=64;; \
 	M5475GFE_config)	BOOT=4;CODE=0;VID=0;USB=0;RAM=64;RAM1=0;; \
 	esac; \
-	echo "#define CFG_BUSCLK	133333333" > $(obj)include/config.h ; \
-	echo "#define CFG_BOOTSZ	$${BOOT}" >> $(obj)include/config.h ; \
-	echo "#define CFG_DRAMSZ	$${RAM}" >> $(obj)include/config.h ; \
+	echo "#define CONFIG_SYS_BUSCLK	133333333" > $(obj)include/config.h ; \
+	echo "#define CONFIG_SYS_BOOTSZ	$${BOOT}" >> $(obj)include/config.h ; \
+	echo "#define CONFIG_SYS_DRAMSZ	$${RAM}" >> $(obj)include/config.h ; \
 	if [ "$${RAM1}" != "0" ] ; then \
-		echo "#define CFG_DRAMSZ1	$${RAM1}" >> $(obj)include/config.h ; \
+		echo "#define CONFIG_SYS_DRAMSZ1	$${RAM1}" >> $(obj)include/config.h ; \
 	fi; \
 	if [ "$${CODE}" != "0" ] ; then \
-		echo "#define CFG_NOR1SZ	$${CODE}" >> $(obj)include/config.h ; \
+		echo "#define CONFIG_SYS_NOR1SZ	$${CODE}" >> $(obj)include/config.h ; \
 	fi; \
 	if [ "$${VID}" == "1" ] ; then \
-		echo "#define CFG_VIDEO" >> $(obj)include/config.h ; \
+		echo "#define CONFIG_SYS_VIDEO" >> $(obj)include/config.h ; \
 	fi; \
 	if [ "$${USB}" == "1" ] ; then \
-		echo "#define CFG_USBCTRL" >> $(obj)include/config.h ; \
+		echo "#define CONFIG_SYS_USBCTRL" >> $(obj)include/config.h ; \
 	fi
 	@$(MKCONFIG) -a M5475EVB m68k mcf547x_8x m547xevb freescale
 
@@ -2039,20 +2160,20 @@ M5485HFE_config :	unconfig
 	M5485GFE_config)	BOOT=4;CODE=0;VID=0;USB=0;RAM=64;RAM1=0;; \
 	M5485HFE_config)	BOOT=2;CODE=16;VID=1;USB=0;RAM=64;RAM1=0;; \
 	esac; \
-	echo "#define CFG_BUSCLK	100000000" > $(obj)include/config.h ; \
-	echo "#define CFG_BOOTSZ	$${BOOT}" >> $(obj)include/config.h ; \
-	echo "#define CFG_DRAMSZ	$${RAM}" >> $(obj)include/config.h ; \
+	echo "#define CONFIG_SYS_BUSCLK	100000000" > $(obj)include/config.h ; \
+	echo "#define CONFIG_SYS_BOOTSZ	$${BOOT}" >> $(obj)include/config.h ; \
+	echo "#define CONFIG_SYS_DRAMSZ	$${RAM}" >> $(obj)include/config.h ; \
 	if [ "$${RAM1}" != "0" ] ; then \
-		echo "#define CFG_DRAMSZ1	$${RAM1}" >> $(obj)include/config.h ; \
+		echo "#define CONFIG_SYS_DRAMSZ1	$${RAM1}" >> $(obj)include/config.h ; \
 	fi; \
 	if [ "$${CODE}" != "0" ] ; then \
-		echo "#define CFG_NOR1SZ	$${CODE}" >> $(obj)include/config.h ; \
+		echo "#define CONFIG_SYS_NOR1SZ	$${CODE}" >> $(obj)include/config.h ; \
 	fi; \
 	if [ "$${VID}" == "1" ] ; then \
-		echo "#define CFG_VIDEO" >> $(obj)include/config.h ; \
+		echo "#define CONFIG_SYS_VIDEO" >> $(obj)include/config.h ; \
 	fi; \
 	if [ "$${USB}" == "1" ] ; then \
-		echo "#define CFG_USBCTRL" >> $(obj)include/config.h ; \
+		echo "#define CONFIG_SYS_USBCTRL" >> $(obj)include/config.h ; \
 	fi
 	@$(MKCONFIG) -a M5485EVB m68k mcf547x_8x m548xevb freescale
 
@@ -2071,11 +2192,11 @@ MPC8313ERDB_NAND_66_config: unconfig
 	@mkdir -p $(obj)board/freescale/mpc8313erdb
 	@if [ "$(findstring _33_,$@)" ] ; then \
 		$(XECHO) -n "...33M ..." ; \
-		echo "#define CFG_33MHZ" >>$(obj)include/config.h ; \
+		echo "#define CONFIG_SYS_33MHZ" >>$(obj)include/config.h ; \
 	fi ; \
 	if [ "$(findstring _66_,$@)" ] ; then \
 		$(XECHO) -n "...66M..." ; \
-		echo "#define CFG_66MHZ" >>$(obj)include/config.h ; \
+		echo "#define CONFIG_SYS_66MHZ" >>$(obj)include/config.h ; \
 	fi ; \
 	if [ "$(findstring _NAND_,$@)" ] ; then \
 		$(XECHO) -n "...NAND..." ; \
@@ -2083,6 +2204,9 @@ MPC8313ERDB_NAND_66_config: unconfig
 		echo "#define CONFIG_NAND_U_BOOT" >>$(obj)include/config.h ; \
 	fi ;
 	@$(MKCONFIG) -a MPC8313ERDB ppc mpc83xx mpc8313erdb freescale
+	@if [ "$(findstring _NAND_,$@)" ] ; then \
+		echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk ; \
+	fi ;
 
 MPC8315ERDB_config: unconfig
 	@$(MKCONFIG) -a MPC8315ERDB ppc mpc83xx mpc8315erdb freescale
@@ -2344,8 +2468,14 @@ TQM8560_config:		unconfig
 MPC8610HPCD_config:	unconfig
 	@$(MKCONFIG) $(@:_config=) ppc mpc86xx mpc8610hpcd freescale
 
+MPC8641HPCN_36BIT_config \
 MPC8641HPCN_config:    unconfig
-	@$(MKCONFIG) $(@:_config=) ppc mpc86xx mpc8641hpcn freescale
+	@mkdir -p $(obj)include
+	@if [ "$(findstring _36BIT_,$@)" ] ; then \
+		echo "#define CONFIG_PHYS_64BIT" >>$(obj)include/config.h ; \
+		$(XECHO) "... enabling 36-bit physical addressing." ; \
+	fi
+	@$(MKCONFIG) -a MPC8641HPCN ppc mpc86xx mpc8641hpcn freescale
 
 sbc8641d_config:	unconfig
 	@$(MKCONFIG) $(@:_config=) ppc mpc86xx sbc8641d
@@ -2435,15 +2565,6 @@ shannon_config	:	unconfig
 at91rm9200dk_config	:	unconfig
 	@$(MKCONFIG) $(@:_config=) arm arm920t at91rm9200dk atmel at91rm9200
 
-at91sam9261ek_config	:	unconfig
-	@$(MKCONFIG) $(@:_config=) arm arm926ejs at91sam9261ek atmel at91
-
-at91sam9263ek_config	:	unconfig
-	@$(MKCONFIG) $(@:_config=) arm arm926ejs at91sam9263ek atmel at91
-
-at91sam9rlek_config	:	unconfig
-	@$(MKCONFIG) $(@:_config=) arm arm926ejs at91sam9rlek atmel at91
-
 cmc_pu2_config	:	unconfig
 	@$(MKCONFIG) $(@:_config=) arm arm920t cmc_pu2 NULL at91rm9200
 
@@ -2463,11 +2584,69 @@ mp2usb_config	:	unconfig
 ## Atmel ARM926EJ-S Systems
 #########################################################################
 
+afeb9260_config:	unconfig
+	@$(MKCONFIG) $(@:_config=) arm arm926ejs afeb9260 NULL at91
+
 at91cap9adk_config	:	unconfig
 	@$(MKCONFIG) $(@:_config=) arm arm926ejs at91cap9adk atmel at91
 
+at91sam9260ek_nandflash_config \
+at91sam9260ek_dataflash_cs0_config \
+at91sam9260ek_dataflash_cs1_config \
 at91sam9260ek_config	:	unconfig
-	@$(MKCONFIG) $(@:_config=) arm arm926ejs at91sam9260ek atmel at91
+	@if [ "$(findstring _nandflash,$@)" ] ; then \
+		echo "#define CONFIG_SYS_USE_NANDFLASH 1"	>>$(obj)include/config.h ; \
+		$(XECHO) "... with environment variable in NAND FLASH" ; \
+	elif [ "$(findstring dataflash_cs0,$@)" ] ; then \
+		echo "#define CONFIG_SYS_USE_DATAFLASH_CS0 1"	>>$(obj)include/config.h ; \
+		$(XECHO) "... with environment variable in SPI DATAFLASH CS0" ; \
+	else \
+		echo "#define CONFIG_SYS_USE_DATAFLASH_CS1 1"	>>$(obj)include/config.h ; \
+		$(XECHO) "... with environment variable in SPI DATAFLASH CS1" ; \
+	fi;
+	@$(MKCONFIG) -a at91sam9260ek arm arm926ejs at91sam9260ek atmel at91
+
+at91sam9261ek_nandflash_config \
+at91sam9261ek_dataflash_cs0_config \
+at91sam9261ek_dataflash_cs3_config \
+at91sam9261ek_config	:	unconfig
+	@if [ "$(findstring _nandflash,$@)" ] ; then \
+		echo "#define CONFIG_SYS_USE_NANDFLASH 1"	>>$(obj)include/config.h ; \
+		$(XECHO) "... with environment variable in NAND FLASH" ; \
+	elif [ "$(findstring dataflash_cs3,$@)" ] ; then \
+		echo "#define CONFIG_SYS_USE_DATAFLASH_CS3 1"	>>$(obj)include/config.h ; \
+		$(XECHO) "... with environment variable in SPI DATAFLASH CS3" ; \
+	else \
+		echo "#define CONFIG_SYS_USE_DATAFLASH_CS0 1"	>>$(obj)include/config.h ; \
+		$(XECHO) "... with environment variable in SPI DATAFLASH CS0" ; \
+	fi;
+	@$(MKCONFIG) -a at91sam9261ek arm arm926ejs at91sam9261ek atmel at91
+
+at91sam9263ek_nandflash_config \
+at91sam9263ek_dataflash_config \
+at91sam9263ek_dataflash_cs0_config \
+at91sam9263ek_config	:	unconfig
+	@if [ "$(findstring _nandflash,$@)" ] ; then \
+		echo "#define CONFIG_SYS_USE_NANDFLASH 1"	>>$(obj)include/config.h ; \
+		$(XECHO) "... with environment variable in NAND FLASH" ; \
+	else \
+		echo "#define CONFIG_SYS_USE_DATAFLASH 1"	>>$(obj)include/config.h ; \
+		$(XECHO) "... with environment variable in SPI DATAFLASH CS0" ; \
+	fi;
+	@$(MKCONFIG) -a at91sam9263ek arm arm926ejs at91sam9263ek atmel at91
+
+at91sam9rlek_nandflash_config \
+at91sam9rlek_dataflash_config \
+at91sam9rlek_dataflash_cs0_config \
+at91sam9rlek_config	:	unconfig
+	@if [ "$(findstring _nandflash,$@)" ] ; then \
+		echo "#define CONFIG_SYS_USE_NANDFLASH 1"	>>$(obj)include/config.h ; \
+		$(XECHO) "... with environment variable in NAND FLASH" ; \
+	else \
+		echo "#define CONFIG_SYS_USE_DATAFLASH 1"	>>$(obj)include/config.h ; \
+		$(XECHO) "... with environment variable in SPI DATAFLASH CS0" ; \
+	fi;
+	@$(MKCONFIG) -a at91sam9rlek arm arm926ejs at91sam9rlek atmel at91
 
 ########################################################################
 ## ARM Integrator boards - see doc/README-integrator for more info.
@@ -2972,11 +3151,6 @@ suzaku_config:	unconfig
 	@echo "#define CONFIG_SUZAKU 1" > $(obj)include/config.h
 	@$(MKCONFIG) -a $(@:_config=) microblaze microblaze suzaku AtmarkTechno
 
-xupv2p_config:	unconfig
-	@mkdir -p $(obj)include
-	@echo "#define CONFIG_XUPV2P 1" > $(obj)include/config.h
-	@$(MKCONFIG) -a $(@:_config=) microblaze microblaze xupv2p xilinx
-
 #========================================================================
 # Blackfin
 #========================================================================
@@ -3029,7 +3203,7 @@ mimc200_config		:	unconfig
 rsk7203_config: unconfig
 	@ >include/config.h
 	@echo "#define CONFIG_RSK7203 1" >> include/config.h
-	@./mkconfig -a $(@:_config=) sh sh2 rsk7203
+	@$(MKCONFIG) -a $(@:_config=) sh sh2 rsk7203 renesas
 
 #########################################################################
 ## sh3 (Renesas SuperH)
@@ -3052,7 +3226,7 @@ ms7720se_config: unconfig
 MigoR_config :       unconfig
 	@mkdir -p $(obj)include
 	@echo "#define CONFIG_MIGO_R 1" > $(obj)include/config.h
-	@./mkconfig -a $(@:_config=) sh sh4 MigoR
+	@$(MKCONFIG) -a $(@:_config=) sh sh4 MigoR renesas
 
 ms7750se_config: unconfig
 	@mkdir -p $(obj)include
@@ -3067,27 +3241,27 @@ ms7722se_config :	unconfig
 r2dplus_config  :   unconfig
 	@mkdir -p $(obj)include
 	@echo "#define CONFIG_R2DPLUS 1" > $(obj)include/config.h
-	@$(MKCONFIG) -a $(@:_config=) sh sh4 r2dplus
+	@$(MKCONFIG) -a $(@:_config=) sh sh4 r2dplus renesas
 
 r7780mp_config: unconfig
 	@mkdir -p $(obj)include
 	@echo "#define CONFIG_R7780MP 1" > $(obj)include/config.h
-	@$(MKCONFIG) -a $(@:_config=) sh sh4 r7780mp
+	@$(MKCONFIG) -a $(@:_config=) sh sh4 r7780mp renesas
 
 sh7763rdp_config  :   unconfig
 	@mkdir -p $(obj)include
 	@echo "#define CONFIG_SH7763RDP 1" > $(obj)include/config.h
-	@$(MKCONFIG) -a $(@:_config=) sh sh4 sh7763rdp
+	@$(MKCONFIG) -a $(@:_config=) sh sh4 sh7763rdp renesas
 
 sh7785lcr_config  :   unconfig
 	@ >include/config.h
 	@echo "#define CONFIG_SH7785LCR 1" >> include/config.h
-	@$(MKCONFIG) -a $(@:_config=) sh sh4 sh7785lcr
+	@$(MKCONFIG) -a $(@:_config=) sh sh4 sh7785lcr renesas
 
 ap325rxa_config  :   unconfig
 	@mkdir -p $(obj)include
 	@echo "#define CONFIG_AP325RXA 1" > $(obj)include/config.h
-	@$(MKCONFIG) -a $(@:_config=) sh sh4 ap325rxa
+	@$(MKCONFIG) -a $(@:_config=) sh sh4 ap325rxa renesas
 
 #========================================================================
 # SPARC
@@ -3148,7 +3322,7 @@ clean:
 	@rm -f $(obj)include/bmp_logo.h
 	@rm -f $(obj)nand_spl/{u-boot-spl,u-boot-spl.map,System.map}
 	@rm -f $(obj)onenand_ipl/onenand-{ipl,ipl.bin,ipl-2k.bin,ipl-4k.bin,ipl.map}
-	@rm -f $(obj)api_examples/demo $(VERSION_FILE)
+	@rm -f $(obj)api_examples/demo $(TIMESTAMP_FILE) $(VERSION_FILE)
 	@find $(OBJTREE) -type f \
 		\( -name 'core' -o -name '*.bak' -o -name '*~' \
 		-o -name '*.o'	-o -name '*.a'	\) -print \
@@ -3162,7 +3336,7 @@ clobber:	clean
 	@rm -f $(OBJS) $(obj)*.bak $(obj)ctags $(obj)etags $(obj)TAGS \
 		$(obj)cscope.* $(obj)*.*~
 	@rm -f $(obj)u-boot $(obj)u-boot.map $(obj)u-boot.hex $(ALL)
-	@rm -f $(obj)tools/{crc32.c,environment.c,env/crc32.c,md5.c,sha1.c,inca-swap-bytes}
+	@rm -f $(obj)tools/{crc32.c,env_embedded.c,env/crc32.c,md5.c,sha1.c,inca-swap-bytes}
 	@rm -f $(obj)tools/{image.c,fdt.c,fdt_ro.c,fdt_rw.c,fdt_strerror.c,zlib.h}
 	@rm -f $(obj)tools/{fdt_wip.c,libfdt_internal.h}
 	@rm -f $(obj)cpu/mpc824x/bedbug_603e.c
diff --git a/README b/README
index 37449d161..2a553c274 100644
--- a/README
+++ b/README
@@ -60,10 +60,10 @@ Where to get help:
 
 In case you have questions about, problems with or contributions for
 U-Boot you should send a message to the U-Boot mailing list at
-<u-boot-users@lists.sourceforge.net>. There is also an archive of
-previous traffic on the mailing list - please search the archive
-before asking FAQ's. Please see
-http://lists.sourceforge.net/lists/listinfo/u-boot-users/
+<u-boot@lists.denx.de>. There is also an archive of previous traffic
+on the mailing list - please search the archive before asking FAQ's.
+Please see http://lists.denx.de/pipermail/u-boot and
+http://dir.gmane.org/gmane.comp.boot-loaders.u-boot
 
 
 Where to get source code:
@@ -151,6 +151,7 @@ Directory Hierarchy:
   - arm926ejs	Files specific to ARM 926 CPUs
   - arm1136	Files specific to ARM 1136 CPUs
   - at32ap	Files specific to Atmel AVR32 AP CPUs
+  - blackfin	Files specific to Analog Devices Blackfin CPUs
   - i386	Files specific to i386 CPUs
   - ixp		Files specific to Intel XScale IXP CPUs
   - leon2	Files specific to Gaisler LEON2 SPARC CPU
@@ -182,6 +183,7 @@ Directory Hierarchy:
 - include	Header Files
 - lib_arm	Files generic to ARM	 architecture
 - lib_avr32	Files generic to AVR32	 architecture
+- lib_blackfin	Files generic to Blackfin architecture
 - lib_generic	Files generic to all	 architectures
 - lib_i386	Files generic to i386	 architecture
 - lib_m68k	Files generic to m68k	 architecture
@@ -210,7 +212,7 @@ There are two classes of configuration variables:
 * Configuration _SETTINGS_:
   These depend on the hardware etc. and should not be meddled with if
   you don't know what you're doing; they have names beginning with
-  "CFG_".
+  "CONFIG_SYS_".
 
 Later we will add a configuration tool - probably similar to or even
 identical to what's used for the Linux kernel. Right now, we have to
@@ -284,10 +286,10 @@ The following options need to be configured:
 - Board flavour: (if CONFIG_MPC8260ADS is defined)
 		CONFIG_ADSTYPE
 		Possible values are:
-			CFG_8260ADS	- original MPC8260ADS
-			CFG_8266ADS	- MPC8266ADS
-			CFG_PQ2FADS	- PQ2FADS-ZU or PQ2FADS-VR
-			CFG_8272ADS	- MPC8272ADS
+			CONFIG_SYS_8260ADS	- original MPC8260ADS
+			CONFIG_SYS_8266ADS	- MPC8266ADS
+			CONFIG_SYS_PQ2FADS	- PQ2FADS-ZU or PQ2FADS-VR
+			CONFIG_SYS_8272ADS	- MPC8272ADS
 
 - MPC824X Family Member (if CONFIG_MPC824X is defined)
 		Define exactly one of
@@ -302,28 +304,28 @@ The following options need to be configured:
 					  or XTAL/EXTAL)
 
 - 859/866/885 CPU options: (if using a MPC859 or MPC866 or MPC885 CPU):
-		CFG_8xx_CPUCLK_MIN
-		CFG_8xx_CPUCLK_MAX
+		CONFIG_SYS_8xx_CPUCLK_MIN
+		CONFIG_SYS_8xx_CPUCLK_MAX
 		CONFIG_8xx_CPUCLK_DEFAULT
 			See doc/README.MPC866
 
-		CFG_MEASURE_CPUCLK
+		CONFIG_SYS_MEASURE_CPUCLK
 
 		Define this to measure the actual CPU clock instead
 		of relying on the correctness of the configured
 		values. Mostly useful for board bringup to make sure
 		the PLL is locked at the intended frequency. Note
 		that this requires a (stable) reference clock (32 kHz
-		RTC clock or CFG_8XX_XIN)
+		RTC clock or CONFIG_SYS_8XX_XIN)
 
 - Intel Monahans options:
-		CFG_MONAHANS_RUN_MODE_OSC_RATIO
+		CONFIG_SYS_MONAHANS_RUN_MODE_OSC_RATIO
 
 		Defines the Monahans run mode to oscillator
 		ratio. Valid values are 8, 16, 24, 31. The core
 		frequency is this value multiplied by 13 MHz.
 
-		CFG_MONAHANS_TURBO_RUN_MODE_RATIO
+		CONFIG_SYS_MONAHANS_TURBO_RUN_MODE_RATIO
 
 		Defines the Monahans turbo mode to oscillator
 		ratio. Valid values are 1 (default if undefined) and
@@ -379,12 +381,30 @@ The following options need to be configured:
 		This define fills in the correct boot CPU in the boot
 		param header, the default value is zero if undefined.
 
+- vxWorks boot parameters:
+
+		bootvx constructs a valid bootline using the following
+		environments variables: bootfile, ipaddr, serverip, hostname.
+		It loads the vxWorks image pointed bootfile.
+
+		CONFIG_SYS_VXWORKS_BOOT_DEVICE - The vxworks device name
+		CONFIG_SYS_VXWORKS_MAC_PTR - Ethernet 6 byte MA -address
+		CONFIG_SYS_VXWORKS_SERVERNAME - Name of the server
+		CONFIG_SYS_VXWORKS_BOOT_ADDR - Address of boot parameters
+
+		CONFIG_SYS_VXWORKS_ADD_PARAMS
+
+		Add it at the end of the bootline. E.g "u=username pw=secret"
+
+		Note: If a "bootargs" environment is defined, it will overwride
+		the defaults discussed just above.
+
 - Serial Ports:
-		CFG_PL010_SERIAL
+		CONFIG_PL010_SERIAL
 
 		Define this if you want support for Amba PrimeCell PL010 UARTs.
 
-		CFG_PL011_SERIAL
+		CONFIG_PL011_SERIAL
 
 		Define this if you want support for Amba PrimeCell PL011 UARTs.
 
@@ -436,7 +456,7 @@ The following options need to be configured:
 			CONFIG_CONSOLE_CURSOR	cursor drawing on/off
 						(requires blink timer
 						cf. i8042.c)
-			CFG_CONSOLE_BLINK_COUNT blink interval (cf. i8042.c)
+			CONFIG_SYS_CONSOLE_BLINK_COUNT blink interval (cf. i8042.c)
 			CONFIG_CONSOLE_TIME	display time/date info in
 						upper right corner
 						(requires CONFIG_CMD_DATE)
@@ -461,8 +481,8 @@ The following options need to be configured:
 - Console Baudrate:
 		CONFIG_BAUDRATE - in bps
 		Select one of the baudrates listed in
-		CFG_BAUDRATE_TABLE, see below.
-		CFG_BRGCLK_PRESCALE, baudrate prescale
+		CONFIG_SYS_BAUDRATE_TABLE, see below.
+		CONFIG_SYS_BRGCLK_PRESCALE, baudrate prescale
 
 - Interrupt driven serial port input:
 		CONFIG_SERIAL_SOFTWARE_FIFO
@@ -546,7 +566,7 @@ The following options need to be configured:
 - Kgdb Serial Baudrate: (if CONFIG_CMD_KGDB is defined)
 		CONFIG_KGDB_BAUDRATE
 		Select one of the baudrates listed in
-		CFG_BAUDRATE_TABLE, see below.
+		CONFIG_SYS_BAUDRATE_TABLE, see below.
 
 - Monitor Functions:
 		Monitor commands can be included or excluded
@@ -673,7 +693,7 @@ The following options need to be configured:
 		CONFIG_RTC_DS164x	- use Dallas DS164x RTC
 		CONFIG_RTC_ISL1208	- use Intersil ISL1208 RTC
 		CONFIG_RTC_MAX6900	- use Maxim, Inc. MAX6900 RTC
-		CFG_RTC_DS1337_NOOSC	- Turn off the OSC output for DS1337
+		CONFIG_SYS_RTC_DS1337_NOOSC	- Turn off the OSC output for DS1337
 
 		Note that if the RTC uses I2C, then the I2C interface
 		must also be configured. See I2C Support, below.
@@ -687,7 +707,7 @@ The following options need to be configured:
 
 - Partition Support:
 		CONFIG_MAC_PARTITION and/or CONFIG_DOS_PARTITION
-		and/or CONFIG_ISO_PARTITION
+		and/or CONFIG_ISO_PARTITION and/or CONFIG_EFI_PARTITION
 
 		If IDE or SCSI support is enabled (CONFIG_CMD_IDE or
 		CONFIG_CMD_SCSI) you must configure support for at
@@ -711,11 +731,11 @@ The following options need to be configured:
 		CONFIG_LBA48
 
 		Set this to enable support for disks larger than 137GB
-		Also look at CFG_64BIT_LBA ,CFG_64BIT_VSPRINTF and CFG_64BIT_STRTOUL
+		Also look at CONFIG_SYS_64BIT_LBA ,CONFIG_SYS_64BIT_VSPRINTF and CONFIG_SYS_64BIT_STRTOUL
 		Whithout these , LBA48 support uses 32bit variables and will 'only'
 		support disks up to 2.1TB.
 
-		CFG_64BIT_LBA:
+		CONFIG_SYS_64BIT_LBA:
 			When enabled, makes the IDE subsystem use 64bit sector addresses.
 			Default is 32bit.
 
@@ -724,12 +744,12 @@ The following options need to be configured:
 		SYM53C8XX SCSI controller; define
 		CONFIG_SCSI_SYM53C8XX to enable it.
 
-		CFG_SCSI_MAX_LUN [8], CFG_SCSI_MAX_SCSI_ID [7] and
-		CFG_SCSI_MAX_DEVICE [CFG_SCSI_MAX_SCSI_ID *
-		CFG_SCSI_MAX_LUN] can be adjusted to define the
+		CONFIG_SYS_SCSI_MAX_LUN [8], CONFIG_SYS_SCSI_MAX_SCSI_ID [7] and
+		CONFIG_SYS_SCSI_MAX_DEVICE [CONFIG_SYS_SCSI_MAX_SCSI_ID *
+		CONFIG_SYS_SCSI_MAX_LUN] can be adjusted to define the
 		maximum numbers of LUNs, SCSI ID's and target
 		devices.
-		CFG_SCSI_SYM53C8XX_CCF to fix clock timing (80Mhz)
+		CONFIG_SYS_SCSI_SYM53C8XX_CCF to fix clock timing (80Mhz)
 
 - NETWORK Support (PCI):
 		CONFIG_E1000
@@ -811,7 +831,7 @@ The following options need to be configured:
 			CONFIG_USB_CONFIG
 				for differential drivers: 0x00001000
 				for single ended drivers: 0x00005000
-			CFG_USB_EVENT_POLL
+			CONFIG_SYS_USB_EVENT_POLL
 				May be defined to allow interrupt polling
 				instead of using asynchronous interrupts
 
@@ -838,18 +858,18 @@ The following options need to be configured:
 			Define this to have a tty type of device available to
 			talk to the UDC device
 
-			CFG_CONSOLE_IS_IN_ENV
+			CONFIG_SYS_CONSOLE_IS_IN_ENV
 			Define this if you want stdin, stdout &/or stderr to
 			be set to usbtty.
 
 			mpc8xx:
-				CFG_USB_EXTC_CLK 0xBLAH
+				CONFIG_SYS_USB_EXTC_CLK 0xBLAH
 				Derive USB clock from external clock "blah"
-				- CFG_USB_EXTC_CLK 0x02
+				- CONFIG_SYS_USB_EXTC_CLK 0x02
 
-				CFG_USB_BRG_CLK 0xBLAH
+				CONFIG_SYS_USB_BRG_CLK 0xBLAH
 				Derive USB clock from brgclk
-				- CFG_USB_BRG_CLK 0x04
+				- CONFIG_SYS_USB_BRG_CLK 0x04
 
 		If you have a USB-IF assigned VendorID then you may wish to
 		define your own vendor specific values either in BoardName.h
@@ -891,16 +911,16 @@ The following options need to be configured:
 		CONFIG_JFFS2_NAND_DEV
 		Define these for a default partition on a NAND device
 
-		CFG_JFFS2_FIRST_SECTOR,
-		CFG_JFFS2_FIRST_BANK, CFG_JFFS2_NUM_BANKS
+		CONFIG_SYS_JFFS2_FIRST_SECTOR,
+		CONFIG_SYS_JFFS2_FIRST_BANK, CONFIG_SYS_JFFS2_NUM_BANKS
 		Define these for a default partition on a NOR device
 
-		CFG_JFFS_CUSTOM_PART
+		CONFIG_SYS_JFFS_CUSTOM_PART
 		Define this to create an own partition. You have to provide a
 		function struct part_info* jffs2_part_info(int part_num)
 
 		If you define only one JFFS2 partition you may also want to
-		#define CFG_JFFS_SINGLE_PART	1
+		#define CONFIG_SYS_JFFS_SINGLE_PART	1
 		to disable the command chpart. This is the default when you
 		have not defined a custom partition
 
@@ -1014,7 +1034,7 @@ The following options need to be configured:
 			320x240. Black & white.
 
 		Normally display is black on white background; define
-		CFG_WHITE_ON_BLACK to get it inverted.
+		CONFIG_SYS_WHITE_ON_BLACK to get it inverted.
 
 - Splash Screen Support: CONFIG_SPLASH_SCREEN
 
@@ -1041,9 +1061,32 @@ The following options need to be configured:
 		compressed images are supported.
 
 		NOTE: the bzip2 algorithm requires a lot of RAM, so
-		the malloc area (as defined by CFG_MALLOC_LEN) should
+		the malloc area (as defined by CONFIG_SYS_MALLOC_LEN) should
 		be at least 4MB.
 
+		CONFIG_LZMA
+
+		If this option is set, support for lzma compressed
+		images is included.
+
+		Note: The LZMA algorithm adds between 2 and 4KB of code and it
+		requires an amount of dynamic memory that is given by the
+		formula:
+
+			(1846 + 768 << (lc + lp)) * sizeof(uint16)
+
+		Where lc and lp stand for, respectively, Literal context bits
+		and Literal pos bits.
+
+		This value is upper-bounded by 14MB in the worst case. Anyway,
+		for a ~4MB large kernel image, we have lc=3 and lp=0 for a
+		total amount of (1846 + 768 << (3 + 0)) * 2 = ~41KB... that is
+		a very small buffer.
+
+		Use the lzmainfo tool to determinate the lc and lp values and
+		then calculate the amount of needed dynamic memory (ensuring
+		the appropriate CONFIG_SYS_MALLOC_LEN value).
+
 - MII/PHY support:
 		CONFIG_PHY_ADDR
 
@@ -1072,8 +1115,11 @@ The following options need to be configured:
 
 - Ethernet address:
 		CONFIG_ETHADDR
+		CONFIG_ETH1ADDR
 		CONFIG_ETH2ADDR
 		CONFIG_ETH3ADDR
+		CONFIG_ETH4ADDR
+		CONFIG_ETH5ADDR
 
 		Define a default value for Ethernet address to use
 		for the respective Ethernet interface, in case this
@@ -1256,15 +1302,15 @@ The following options need to be configured:
 		There are several other quantities that must also be
 		defined when you define CONFIG_HARD_I2C or CONFIG_SOFT_I2C.
 
-		In both cases you will need to define CFG_I2C_SPEED
+		In both cases you will need to define CONFIG_SYS_I2C_SPEED
 		to be the frequency (in Hz) at which you wish your i2c bus
-		to run and CFG_I2C_SLAVE to be the address of this node (ie
+		to run and CONFIG_SYS_I2C_SLAVE to be the address of this node (ie
 		the CPU's i2c node address).
 
 		Now, the u-boot i2c code for the mpc8xx (cpu/mpc8xx/i2c.c)
 		sets the CPU up as a master node and so its address should
 		therefore be cleared to 0 (See, eg, MPC823e User's Manual
-		p.16-473). So, set CFG_I2C_SLAVE to 0.
+		p.16-473). So, set CONFIG_SYS_I2C_SLAVE to 0.
 
 		That's all that's required for CONFIG_HARD_I2C.
 
@@ -1335,7 +1381,7 @@ The following options need to be configured:
 
 		#define I2C_DELAY  udelay(2)
 
-		CFG_I2C_INIT_BOARD
+		CONFIG_SYS_I2C_INIT_BOARD
 
 		When a board is reset during an i2c bus transfer
 		chips might think that the current transfer is still
@@ -1359,7 +1405,7 @@ The following options need to be configured:
 		active.  To switch to a different bus, use the 'i2c dev' command.
 		Note that bus numbering is zero-based.
 
-		CFG_I2C_NOPROBES
+		CONFIG_SYS_I2C_NOPROBES
 
 		This option specifies a list of I2C devices that will be skipped
 		when the 'i2c probe' command is issued (or 'iprobe' using the legacy
@@ -1368,35 +1414,88 @@ The following options need to be configured:
 
 		e.g.
 			#undef	CONFIG_I2C_MULTI_BUS
-			#define CFG_I2C_NOPROBES	{0x50,0x68}
+			#define CONFIG_SYS_I2C_NOPROBES	{0x50,0x68}
 
 		will skip addresses 0x50 and 0x68 on a board with one I2C bus
 
 			#define	CONFIG_I2C_MULTI_BUS
-			#define CFG_I2C_MULTI_NOPROBES	{{0,0x50},{0,0x68},{1,0x54}}
+			#define CONFIG_SYS_I2C_MULTI_NOPROBES	{{0,0x50},{0,0x68},{1,0x54}}
 
 		will skip addresses 0x50 and 0x68 on bus 0 and address 0x54 on bus 1
 
-		CFG_SPD_BUS_NUM
+		CONFIG_SYS_SPD_BUS_NUM
 
 		If defined, then this indicates the I2C bus number for DDR SPD.
 		If not defined, then U-Boot assumes that SPD is on I2C bus 0.
 
-		CFG_RTC_BUS_NUM
+		CONFIG_SYS_RTC_BUS_NUM
 
 		If defined, then this indicates the I2C bus number for the RTC.
 		If not defined, then U-Boot assumes that RTC is on I2C bus 0.
 
-		CFG_DTT_BUS_NUM
+		CONFIG_SYS_DTT_BUS_NUM
 
 		If defined, then this indicates the I2C bus number for the DTT.
 		If not defined, then U-Boot assumes that DTT is on I2C bus 0.
 
+		CONFIG_SYS_I2C_DTT_ADDR:
+
+		If defined, specifies the I2C address of the DTT device.
+		If not defined, then U-Boot uses predefined value for
+		specified DTT device.
+
 		CONFIG_FSL_I2C
 
 		Define this option if you want to use Freescale's I2C driver in
 		drivers/i2c/fsl_i2c.c.
 
+		CONFIG_I2C_MUX
+
+		Define this option if you have I2C devices reached over 1 .. n
+		I2C Muxes like the pca9544a. This option addes a new I2C
+		Command "i2c bus [muxtype:muxaddr:muxchannel]" which adds a
+		new I2C Bus to the existing I2C Busses. If you select the
+		new Bus with "i2c dev", u-bbot sends first the commandos for
+		the muxes to activate this new "bus".
+
+		CONFIG_I2C_MULTI_BUS must be also defined, to use this
+		feature!
+
+		Example:
+		Adding a new I2C Bus reached over 2 pca9544a muxes
+			The First mux with address 70 and channel 6
+			The Second mux with address 71 and channel 4
+
+		=> i2c bus pca9544a:70:6:pca9544a:71:4
+
+		Use the "i2c bus" command without parameter, to get a list
+		of I2C Busses with muxes:
+
+		=> i2c bus
+		Busses reached over muxes:
+		Bus ID: 2
+		  reached over Mux(es):
+		    pca9544a@70 ch: 4
+		Bus ID: 3
+		  reached over Mux(es):
+		    pca9544a@70 ch: 6
+		    pca9544a@71 ch: 4
+		=>
+
+		If you now switch to the new I2C Bus 3 with "i2c dev 3"
+		u-boot sends First the Commando to the mux@70 to enable
+		channel 6, and then the Commando to the mux@71 to enable
+		the channel 4.
+
+		After that, you can use the "normal" i2c commands as
+		usual, to communicate with your I2C devices behind
+		the 2 muxes.
+
+		This option is actually implemented for the bitbanging
+		algorithm in common/soft_i2c.c and for the Hardware I2C
+		Bus on the MPC8260. But it should be not so difficult
+		to add this option to other architectures.
+
 
 - SPI Support:	CONFIG_SPI
 
@@ -1450,11 +1549,11 @@ The following options need to be configured:
 
 		Specify the number of FPGA devices to support.
 
-		CFG_FPGA_PROG_FEEDBACK
+		CONFIG_SYS_FPGA_PROG_FEEDBACK
 
 		Enable printing of hash marks during FPGA configuration.
 
-		CFG_FPGA_CHECK_BUSY
+		CONFIG_SYS_FPGA_CHECK_BUSY
 
 		Enable checks on FPGA configuration interface busy
 		status by the configuration function. This option
@@ -1466,29 +1565,29 @@ The following options need to be configured:
 		If defined, a function that provides delays in the FPGA
 		configuration driver.
 
-		CFG_FPGA_CHECK_CTRLC
+		CONFIG_SYS_FPGA_CHECK_CTRLC
 		Allow Control-C to interrupt FPGA configuration
 
-		CFG_FPGA_CHECK_ERROR
+		CONFIG_SYS_FPGA_CHECK_ERROR
 
 		Check for configuration errors during FPGA bitfile
 		loading. For example, abort during Virtex II
 		configuration if the INIT_B line goes low (which
 		indicated a CRC error).
 
-		CFG_FPGA_WAIT_INIT
+		CONFIG_SYS_FPGA_WAIT_INIT
 
 		Maximum time to wait for the INIT_B line to deassert
 		after PROB_B has been deasserted during a Virtex II
 		FPGA configuration sequence. The default time is 500
 		ms.
 
-		CFG_FPGA_WAIT_BUSY
+		CONFIG_SYS_FPGA_WAIT_BUSY
 
 		Maximum time to wait for BUSY to deassert during
 		Virtex II FPGA configuration. The default is 5 ms.
 
-		CFG_FPGA_WAIT_CONFIG
+		CONFIG_SYS_FPGA_WAIT_CONFIG
 
 		Time to wait after FPGA configuration. The default is
 		200 ms.
@@ -1586,7 +1685,7 @@ The following options need to be configured:
 		for the "hush" shell.
 
 
-		CFG_HUSH_PARSER
+		CONFIG_SYS_HUSH_PARSER
 
 		Define this variable to enable the "hush" shell (from
 		Busybox) as command line interpreter, thus enabling
@@ -1598,7 +1697,7 @@ The following options need to be configured:
 		with a somewhat smaller memory footprint.
 
 
-		CFG_PROMPT_HUSH_PS2
+		CONFIG_SYS_PROMPT_HUSH_PS2
 
 		This defines the secondary prompt string, which is
 		printed when the command interpreter needs more input
@@ -1670,10 +1769,10 @@ The following options need to be configured:
 		Adding this option adds support for Xilinx SystemACE
 		chips attached via some sort of local bus. The address
 		of the chip must also be defined in the
-		CFG_SYSTEMACE_BASE macro. For example:
+		CONFIG_SYS_SYSTEMACE_BASE macro. For example:
 
 		#define CONFIG_SYSTEMACE
-		#define CFG_SYSTEMACE_BASE 0xf0000000
+		#define CONFIG_SYS_SYSTEMACE_BASE 0xf0000000
 
 		When SystemACE support is added, the "ace" device type
 		becomes available to the fat commands, i.e. fatls.
@@ -1708,6 +1807,14 @@ The following options need to be configured:
 		example, some LED's) on your board. At the moment,
 		the following checkpoints are implemented:
 
+- Automatic software updates via TFTP server
+		CONFIG_UPDATE_TFTP
+		CONFIG_UPDATE_TFTP_CNT_MAX
+		CONFIG_UPDATE_TFTP_MSEC_MAX
+
+		These options enable and control the auto-update feature;
+		for a more detailed description refer to doc/README.update.
+
 Legacy uImage format:
 
   Arg	Where			When
@@ -1913,53 +2020,53 @@ Modem Support:
 Configuration Settings:
 -----------------------
 
-- CFG_LONGHELP: Defined when you want long help messages included;
+- CONFIG_SYS_LONGHELP: Defined when you want long help messages included;
 		undefine this when you're short of memory.
 
-- CFG_PROMPT:	This is what U-Boot prints on the console to
+- CONFIG_SYS_PROMPT:	This is what U-Boot prints on the console to
 		prompt for user input.
 
-- CFG_CBSIZE:	Buffer size for input from the Console
+- CONFIG_SYS_CBSIZE:	Buffer size for input from the Console
 
-- CFG_PBSIZE:	Buffer size for Console output
+- CONFIG_SYS_PBSIZE:	Buffer size for Console output
 
-- CFG_MAXARGS:	max. Number of arguments accepted for monitor commands
+- CONFIG_SYS_MAXARGS:	max. Number of arguments accepted for monitor commands
 
-- CFG_BARGSIZE: Buffer size for Boot Arguments which are passed to
+- CONFIG_SYS_BARGSIZE: Buffer size for Boot Arguments which are passed to
 		the application (usually a Linux kernel) when it is
 		booted
 
-- CFG_BAUDRATE_TABLE:
+- CONFIG_SYS_BAUDRATE_TABLE:
 		List of legal baudrate settings for this board.
 
-- CFG_CONSOLE_INFO_QUIET
+- CONFIG_SYS_CONSOLE_INFO_QUIET
 		Suppress display of console information at boot.
 
-- CFG_CONSOLE_IS_IN_ENV
+- CONFIG_SYS_CONSOLE_IS_IN_ENV
 		If the board specific function
 			extern int overwrite_console (void);
 		returns 1, the stdin, stderr and stdout are switched to the
 		serial port, else the settings in the environment are used.
 
-- CFG_CONSOLE_OVERWRITE_ROUTINE
+- CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
 		Enable the call to overwrite_console().
 
-- CFG_CONSOLE_ENV_OVERWRITE
+- CONFIG_SYS_CONSOLE_ENV_OVERWRITE
 		Enable overwrite of previous console environment settings.
 
-- CFG_MEMTEST_START, CFG_MEMTEST_END:
+- CONFIG_SYS_MEMTEST_START, CONFIG_SYS_MEMTEST_END:
 		Begin and End addresses of the area used by the
 		simple memory test.
 
-- CFG_ALT_MEMTEST:
+- CONFIG_SYS_ALT_MEMTEST:
 		Enable an alternate, more extensive memory test.
 
-- CFG_MEMTEST_SCRATCH:
+- CONFIG_SYS_MEMTEST_SCRATCH:
 		Scratch address used by the alternate memory test
 		You only need to set this if address zero isn't writeable
 
-- CFG_MEM_TOP_HIDE (PPC only):
-		If CFG_MEM_TOP_HIDE is defined in the board config header,
+- CONFIG_SYS_MEM_TOP_HIDE (PPC only):
+		If CONFIG_SYS_MEM_TOP_HIDE is defined in the board config header,
 		this specified memory area will get subtracted from the top
 		(end) of RAM and won't get "touched" at all by U-Boot. By
 		fixing up gd->ram_size the Linux kernel should gets passed
@@ -1979,75 +2086,75 @@ Configuration Settings:
 		non page size aligned address and this could cause major
 		problems.
 
-- CFG_TFTP_LOADADDR:
+- CONFIG_SYS_TFTP_LOADADDR:
 		Default load address for network file downloads
 
-- CFG_LOADS_BAUD_CHANGE:
+- CONFIG_SYS_LOADS_BAUD_CHANGE:
 		Enable temporary baudrate change while serial download
 
-- CFG_SDRAM_BASE:
+- CONFIG_SYS_SDRAM_BASE:
 		Physical start address of SDRAM. _Must_ be 0 here.
 
-- CFG_MBIO_BASE:
+- CONFIG_SYS_MBIO_BASE:
 		Physical start address of Motherboard I/O (if using a
 		Cogent motherboard)
 
-- CFG_FLASH_BASE:
+- CONFIG_SYS_FLASH_BASE:
 		Physical start address of Flash memory.
 
-- CFG_MONITOR_BASE:
+- CONFIG_SYS_MONITOR_BASE:
 		Physical start address of boot monitor code (set by
 		make config files to be same as the text base address
 		(TEXT_BASE) used when linking) - same as
-		CFG_FLASH_BASE when booting from flash.
+		CONFIG_SYS_FLASH_BASE when booting from flash.
 
-- CFG_MONITOR_LEN:
+- CONFIG_SYS_MONITOR_LEN:
 		Size of memory reserved for monitor code, used to
 		determine _at_compile_time_ (!) if the environment is
 		embedded within the U-Boot image, or in a separate
 		flash sector.
 
-- CFG_MALLOC_LEN:
+- CONFIG_SYS_MALLOC_LEN:
 		Size of DRAM reserved for malloc() use.
 
-- CFG_BOOTM_LEN:
+- CONFIG_SYS_BOOTM_LEN:
 		Normally compressed uImages are limited to an
 		uncompressed size of 8 MBytes. If this is not enough,
-		you can define CFG_BOOTM_LEN in your board config file
+		you can define CONFIG_SYS_BOOTM_LEN in your board config file
 		to adjust this setting to your needs.
 
-- CFG_BOOTMAPSZ:
+- CONFIG_SYS_BOOTMAPSZ:
 		Maximum size of memory mapped by the startup code of
 		the Linux kernel; all data that must be processed by
 		the Linux kernel (bd_info, boot arguments, FDT blob if
 		used) must be put below this limit, unless "bootm_low"
 		enviroment variable is defined and non-zero. In such case
 		all data for the Linux kernel must be between "bootm_low"
-		and "bootm_low" + CFG_BOOTMAPSZ.
+		and "bootm_low" + CONFIG_SYS_BOOTMAPSZ.
 
-- CFG_MAX_FLASH_BANKS:
+- CONFIG_SYS_MAX_FLASH_BANKS:
 		Max number of Flash memory banks
 
-- CFG_MAX_FLASH_SECT:
+- CONFIG_SYS_MAX_FLASH_SECT:
 		Max number of sectors on a Flash chip
 
-- CFG_FLASH_ERASE_TOUT:
+- CONFIG_SYS_FLASH_ERASE_TOUT:
 		Timeout for Flash erase operations (in ms)
 
-- CFG_FLASH_WRITE_TOUT:
+- CONFIG_SYS_FLASH_WRITE_TOUT:
 		Timeout for Flash write operations (in ms)
 
-- CFG_FLASH_LOCK_TOUT
+- CONFIG_SYS_FLASH_LOCK_TOUT
 		Timeout for Flash set sector lock bit operation (in ms)
 
-- CFG_FLASH_UNLOCK_TOUT
+- CONFIG_SYS_FLASH_UNLOCK_TOUT
 		Timeout for Flash clear lock bits operation (in ms)
 
-- CFG_FLASH_PROTECTION
+- CONFIG_SYS_FLASH_PROTECTION
 		If defined, hardware flash sectors protection is used
 		instead of U-Boot software protection.
 
-- CFG_DIRECT_FLASH_TFTP:
+- CONFIG_SYS_DIRECT_FLASH_TFTP:
 
 		Enable TFTP transfers directly to flash memory;
 		without this option such a download has to be
@@ -2060,7 +2167,7 @@ Configuration Settings:
 		too limited to allow for a temporary copy of the
 		downloaded image) this option may be very useful.
 
-- CFG_FLASH_CFI:
+- CONFIG_SYS_FLASH_CFI:
 		Define if the flash driver uses extra elements in the
 		common flash structure for storing flash geometry.
 
@@ -2068,14 +2175,19 @@ Configuration Settings:
 		This option also enables the building of the cfi_flash driver
 		in the drivers directory
 
-- CFG_FLASH_USE_BUFFER_WRITE
+- CONFIG_FLASH_CFI_MTD
+		This option enables the building of the cfi_mtd driver
+		in the drivers directory. The driver exports CFI flash
+		to the MTD layer.
+
+- CONFIG_SYS_FLASH_USE_BUFFER_WRITE
 		Use buffered writes to flash.
 
 - CONFIG_FLASH_SPANSION_S29WS_N
 		s29ws-n MirrorBit flash has non-standard addresses for buffered
 		write commands.
 
-- CFG_FLASH_QUIET_TEST
+- CONFIG_SYS_FLASH_QUIET_TEST
 		If this option is defined, the common CFI flash doesn't
 		print it's warning upon not recognized FLASH banks. This
 		is useful, if some of the configured banks are only
@@ -2086,7 +2198,7 @@ Configuration Settings:
 		digits and dots.  Recommended value: 45 (9..1) for 80
 		column displays, 15 (3..1) for 40 column displays.
 
-- CFG_RX_ETH_BUFFER:
+- CONFIG_SYS_RX_ETH_BUFFER:
 		Defines the number of Ethernet receive buffers. On some
 		Ethernet controllers it is recommended to set this value
 		to 8 or even higher (EEPRO100 or 405 EMAC), since all
@@ -2098,7 +2210,7 @@ The following definitions that deal with the placement and management
 of environment data (variable area); in general, we support the
 following configurations:
 
-- CFG_ENV_IS_IN_FLASH:
+- CONFIG_ENV_IS_IN_FLASH:
 
 	Define this if the environment is in flash memory.
 
@@ -2114,22 +2226,22 @@ following configurations:
 	   environment in one of the last sectors, leaving a gap
 	   between U-Boot and the environment.
 
-	- CFG_ENV_OFFSET:
+	- CONFIG_ENV_OFFSET:
 
 	   Offset of environment data (variable area) to the
 	   beginning of flash memory; for instance, with bottom boot
 	   type flash chips the second sector can be used: the offset
 	   for this sector is given here.
 
-	   CFG_ENV_OFFSET is used relative to CFG_FLASH_BASE.
+	   CONFIG_ENV_OFFSET is used relative to CONFIG_SYS_FLASH_BASE.
 
-	- CFG_ENV_ADDR:
+	- CONFIG_ENV_ADDR:
 
 	   This is just another way to specify the start address of
 	   the flash sector containing the environment (instead of
-	   CFG_ENV_OFFSET).
+	   CONFIG_ENV_OFFSET).
 
-	- CFG_ENV_SECT_SIZE:
+	- CONFIG_ENV_SECT_SIZE:
 
 	   Size of the sector containing the environment.
 
@@ -2138,10 +2250,10 @@ following configurations:
 	   In such a case you don't want to spend a whole sector for
 	   the environment.
 
-	- CFG_ENV_SIZE:
+	- CONFIG_ENV_SIZE:
 
-	   If you use this in combination with CFG_ENV_IS_IN_FLASH
-	   and CFG_ENV_SECT_SIZE, you can specify to use only a part
+	   If you use this in combination with CONFIG_ENV_IS_IN_FLASH
+	   and CONFIG_ENV_SECT_SIZE, you can specify to use only a part
 	   of this flash sector for the environment. This saves
 	   memory for the RAM copy of the environment.
 
@@ -2155,8 +2267,8 @@ following configurations:
 	   wrong before the contents has been restored from a copy in
 	   RAM, your target system will be dead.
 
-	- CFG_ENV_ADDR_REDUND
-	  CFG_ENV_SIZE_REDUND
+	- CONFIG_ENV_ADDR_REDUND
+	  CONFIG_ENV_SIZE_REDUND
 
 	   These settings describe a second storage area used to hold
 	   a redundant copy of the environment data, so that there is
@@ -2168,14 +2280,14 @@ source code will make it necessary to adapt <board>/u-boot.lds*
 accordingly!
 
 
-- CFG_ENV_IS_IN_NVRAM:
+- CONFIG_ENV_IS_IN_NVRAM:
 
 	Define this if you have some non-volatile memory device
 	(NVRAM, battery buffered SRAM) which you want to use for the
 	environment.
 
-	- CFG_ENV_ADDR:
-	- CFG_ENV_SIZE:
+	- CONFIG_ENV_ADDR:
+	- CONFIG_ENV_SIZE:
 
 	  These two #defines are used to determine the memory area you
 	  want to use for environment. It is assumed that this memory
@@ -2193,35 +2305,35 @@ keep settings there always unmodified except somebody uses "saveenv"
 to save the current settings.
 
 
-- CFG_ENV_IS_IN_EEPROM:
+- CONFIG_ENV_IS_IN_EEPROM:
 
 	Use this if you have an EEPROM or similar serial access
 	device and a driver for it.
 
-	- CFG_ENV_OFFSET:
-	- CFG_ENV_SIZE:
+	- CONFIG_ENV_OFFSET:
+	- CONFIG_ENV_SIZE:
 
 	  These two #defines specify the offset and size of the
 	  environment area within the total memory of your EEPROM.
 
-	- CFG_I2C_EEPROM_ADDR:
+	- CONFIG_SYS_I2C_EEPROM_ADDR:
 	  If defined, specified the chip address of the EEPROM device.
 	  The default address is zero.
 
-	- CFG_EEPROM_PAGE_WRITE_BITS:
+	- CONFIG_SYS_EEPROM_PAGE_WRITE_BITS:
 	  If defined, the number of bits used to address bytes in a
 	  single page in the EEPROM device.  A 64 byte page, for example
 	  would require six bits.
 
-	- CFG_EEPROM_PAGE_WRITE_DELAY_MS:
+	- CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS:
 	  If defined, the number of milliseconds to delay between
 	  page writes.	The default is zero milliseconds.
 
-	- CFG_I2C_EEPROM_ADDR_LEN:
+	- CONFIG_SYS_I2C_EEPROM_ADDR_LEN:
 	  The length in bytes of the EEPROM memory array address.  Note
 	  that this is NOT the chip address length!
 
-	- CFG_I2C_EEPROM_ADDR_OVERFLOW:
+	- CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW:
 	  EEPROM chips that implement "address overflow" are ones
 	  like Catalyst 24WC04/08/16 which has 9/10/11 bits of
 	  address and the extra bits end up in the "chip address" bit
@@ -2232,46 +2344,46 @@ to save the current settings.
 	  still be one byte because the extra address bits are hidden
 	  in the chip address.
 
-	- CFG_EEPROM_SIZE:
+	- CONFIG_SYS_EEPROM_SIZE:
 	  The size in bytes of the EEPROM device.
 
 
-- CFG_ENV_IS_IN_DATAFLASH:
+- CONFIG_ENV_IS_IN_DATAFLASH:
 
 	Define this if you have a DataFlash memory device which you
 	want to use for the environment.
 
-	- CFG_ENV_OFFSET:
-	- CFG_ENV_ADDR:
-	- CFG_ENV_SIZE:
+	- CONFIG_ENV_OFFSET:
+	- CONFIG_ENV_ADDR:
+	- CONFIG_ENV_SIZE:
 
 	  These three #defines specify the offset and size of the
 	  environment area within the total memory of your DataFlash placed
 	  at the specified address.
 
-- CFG_ENV_IS_IN_NAND:
+- CONFIG_ENV_IS_IN_NAND:
 
 	Define this if you have a NAND device which you want to use
 	for the environment.
 
-	- CFG_ENV_OFFSET:
-	- CFG_ENV_SIZE:
+	- CONFIG_ENV_OFFSET:
+	- CONFIG_ENV_SIZE:
 
 	  These two #defines specify the offset and size of the environment
 	  area within the first NAND device.
 
-	- CFG_ENV_OFFSET_REDUND
+	- CONFIG_ENV_OFFSET_REDUND
 
-	  This setting describes a second storage area of CFG_ENV_SIZE
+	  This setting describes a second storage area of CONFIG_ENV_SIZE
 	  size used to hold a redundant copy of the environment data,
 	  so that there is a valid backup copy in case there is a
 	  power failure during a "saveenv" operation.
 
-	Note: CFG_ENV_OFFSET and CFG_ENV_OFFSET_REDUND must be aligned
-	to a block boundary, and CFG_ENV_SIZE must be a multiple of
+	Note: CONFIG_ENV_OFFSET and CONFIG_ENV_OFFSET_REDUND must be aligned
+	to a block boundary, and CONFIG_ENV_SIZE must be a multiple of
 	the NAND devices block size.
 
-- CFG_SPI_INIT_OFFSET
+- CONFIG_SYS_SPI_INIT_OFFSET
 
 	Defines offset to the initial SPI buffer area in DPRAM. The
 	area is used at an early stage (ROM part) if the environment
@@ -2297,29 +2409,29 @@ Note: once the monitor has been relocated, then it will complain if
 the default environment is used; a new CRC is computed as soon as you
 use the "saveenv" command to store a valid environment.
 
-- CFG_FAULT_ECHO_LINK_DOWN:
+- CONFIG_SYS_FAULT_ECHO_LINK_DOWN:
 		Echo the inverted Ethernet link state to the fault LED.
 
-		Note: If this option is active, then CFG_FAULT_MII_ADDR
+		Note: If this option is active, then CONFIG_SYS_FAULT_MII_ADDR
 		      also needs to be defined.
 
-- CFG_FAULT_MII_ADDR:
+- CONFIG_SYS_FAULT_MII_ADDR:
 		MII address of the PHY to check for the Ethernet link state.
 
-- CFG_64BIT_VSPRINTF:
+- CONFIG_SYS_64BIT_VSPRINTF:
 		Makes vsprintf (and all *printf functions) support printing
 		of 64bit values by using the L quantifier
 
-- CFG_64BIT_STRTOUL:
+- CONFIG_SYS_64BIT_STRTOUL:
 		Adds simple_strtoull that returns a 64bit value
 
 Low Level (hardware related) configuration options:
 ---------------------------------------------------
 
-- CFG_CACHELINE_SIZE:
+- CONFIG_SYS_CACHELINE_SIZE:
 		Cache Line Size of the CPU.
 
-- CFG_DEFAULT_IMMR:
+- CONFIG_SYS_DEFAULT_IMMR:
 		Default address of the IMMR after system reset.
 
 		Needed on some 8260 systems (MPC8260ADS, PQ2FADS-ZU,
@@ -2327,36 +2439,36 @@ Low Level (hardware related) configuration options:
 		the IMMR register after a reset.
 
 - Floppy Disk Support:
-		CFG_FDC_DRIVE_NUMBER
+		CONFIG_SYS_FDC_DRIVE_NUMBER
 
 		the default drive number (default value 0)
 
-		CFG_ISA_IO_STRIDE
+		CONFIG_SYS_ISA_IO_STRIDE
 
 		defines the spacing between FDC chipset registers
 		(default value 1)
 
-		CFG_ISA_IO_OFFSET
+		CONFIG_SYS_ISA_IO_OFFSET
 
 		defines the offset of register from address. It
 		depends on which part of the data bus is connected to
 		the FDC chipset. (default value 0)
 
-		If CFG_ISA_IO_STRIDE CFG_ISA_IO_OFFSET and
-		CFG_FDC_DRIVE_NUMBER are undefined, they take their
+		If CONFIG_SYS_ISA_IO_STRIDE CONFIG_SYS_ISA_IO_OFFSET and
+		CONFIG_SYS_FDC_DRIVE_NUMBER are undefined, they take their
 		default value.
 
-		if CFG_FDC_HW_INIT is defined, then the function
+		if CONFIG_SYS_FDC_HW_INIT is defined, then the function
 		fdc_hw_init() is called at the beginning of the FDC
 		setup. fdc_hw_init() must be provided by the board
 		source code. It is used to make hardware dependant
 		initializations.
 
-- CFG_IMMR:	Physical address of the Internal Memory.
+- CONFIG_SYS_IMMR:	Physical address of the Internal Memory.
 		DO NOT CHANGE unless you know exactly what you're
 		doing! (11-4) [MPC8xx/82xx systems only]
 
-- CFG_INIT_RAM_ADDR:
+- CONFIG_SYS_INIT_RAM_ADDR:
 
 		Start address of memory area that can be used for
 		initial data and stack; please note that this must be
@@ -2371,91 +2483,91 @@ Low Level (hardware related) configuration options:
 		- MPC824X: data cache
 		- PPC4xx:  data cache
 
-- CFG_GBL_DATA_OFFSET:
+- CONFIG_SYS_GBL_DATA_OFFSET:
 
 		Offset of the initial data structure in the memory
-		area defined by CFG_INIT_RAM_ADDR. Usually
-		CFG_GBL_DATA_OFFSET is chosen such that the initial
+		area defined by CONFIG_SYS_INIT_RAM_ADDR. Usually
+		CONFIG_SYS_GBL_DATA_OFFSET is chosen such that the initial
 		data is located at the end of the available space
-		(sometimes written as (CFG_INIT_RAM_END -
-		CFG_INIT_DATA_SIZE), and the initial stack is just
-		below that area (growing from (CFG_INIT_RAM_ADDR +
-		CFG_GBL_DATA_OFFSET) downward.
+		(sometimes written as (CONFIG_SYS_INIT_RAM_END -
+		CONFIG_SYS_INIT_DATA_SIZE), and the initial stack is just
+		below that area (growing from (CONFIG_SYS_INIT_RAM_ADDR +
+		CONFIG_SYS_GBL_DATA_OFFSET) downward.
 
 	Note:
 		On the MPC824X (or other systems that use the data
 		cache for initial memory) the address chosen for
-		CFG_INIT_RAM_ADDR is basically arbitrary - it must
+		CONFIG_SYS_INIT_RAM_ADDR is basically arbitrary - it must
 		point to an otherwise UNUSED address space between
 		the top of RAM and the start of the PCI space.
 
-- CFG_SIUMCR:	SIU Module Configuration (11-6)
+- CONFIG_SYS_SIUMCR:	SIU Module Configuration (11-6)
 
-- CFG_SYPCR:	System Protection Control (11-9)
+- CONFIG_SYS_SYPCR:	System Protection Control (11-9)
 
-- CFG_TBSCR:	Time Base Status and Control (11-26)
+- CONFIG_SYS_TBSCR:	Time Base Status and Control (11-26)
 
-- CFG_PISCR:	Periodic Interrupt Status and Control (11-31)
+- CONFIG_SYS_PISCR:	Periodic Interrupt Status and Control (11-31)
 
-- CFG_PLPRCR:	PLL, Low-Power, and Reset Control Register (15-30)
+- CONFIG_SYS_PLPRCR:	PLL, Low-Power, and Reset Control Register (15-30)
 
-- CFG_SCCR:	System Clock and reset Control Register (15-27)
+- CONFIG_SYS_SCCR:	System Clock and reset Control Register (15-27)
 
-- CFG_OR_TIMING_SDRAM:
+- CONFIG_SYS_OR_TIMING_SDRAM:
 		SDRAM timing
 
-- CFG_MAMR_PTA:
+- CONFIG_SYS_MAMR_PTA:
 		periodic timer for refresh
 
-- CFG_DER:	Debug Event Register (37-47)
+- CONFIG_SYS_DER:	Debug Event Register (37-47)
 
-- FLASH_BASE0_PRELIM, FLASH_BASE1_PRELIM, CFG_REMAP_OR_AM,
-  CFG_PRELIM_OR_AM, CFG_OR_TIMING_FLASH, CFG_OR0_REMAP,
-  CFG_OR0_PRELIM, CFG_BR0_PRELIM, CFG_OR1_REMAP, CFG_OR1_PRELIM,
-  CFG_BR1_PRELIM:
+- FLASH_BASE0_PRELIM, FLASH_BASE1_PRELIM, CONFIG_SYS_REMAP_OR_AM,
+  CONFIG_SYS_PRELIM_OR_AM, CONFIG_SYS_OR_TIMING_FLASH, CONFIG_SYS_OR0_REMAP,
+  CONFIG_SYS_OR0_PRELIM, CONFIG_SYS_BR0_PRELIM, CONFIG_SYS_OR1_REMAP, CONFIG_SYS_OR1_PRELIM,
+  CONFIG_SYS_BR1_PRELIM:
 		Memory Controller Definitions: BR0/1 and OR0/1 (FLASH)
 
 - SDRAM_BASE2_PRELIM, SDRAM_BASE3_PRELIM, SDRAM_MAX_SIZE,
-  CFG_OR_TIMING_SDRAM, CFG_OR2_PRELIM, CFG_BR2_PRELIM,
-  CFG_OR3_PRELIM, CFG_BR3_PRELIM:
+  CONFIG_SYS_OR_TIMING_SDRAM, CONFIG_SYS_OR2_PRELIM, CONFIG_SYS_BR2_PRELIM,
+  CONFIG_SYS_OR3_PRELIM, CONFIG_SYS_BR3_PRELIM:
 		Memory Controller Definitions: BR2/3 and OR2/3 (SDRAM)
 
-- CFG_MAMR_PTA, CFG_MPTPR_2BK_4K, CFG_MPTPR_1BK_4K, CFG_MPTPR_2BK_8K,
-  CFG_MPTPR_1BK_8K, CFG_MAMR_8COL, CFG_MAMR_9COL:
+- CONFIG_SYS_MAMR_PTA, CONFIG_SYS_MPTPR_2BK_4K, CONFIG_SYS_MPTPR_1BK_4K, CONFIG_SYS_MPTPR_2BK_8K,
+  CONFIG_SYS_MPTPR_1BK_8K, CONFIG_SYS_MAMR_8COL, CONFIG_SYS_MAMR_9COL:
 		Machine Mode Register and Memory Periodic Timer
 		Prescaler definitions (SDRAM timing)
 
-- CFG_I2C_UCODE_PATCH, CFG_I2C_DPMEM_OFFSET [0x1FC0]:
+- CONFIG_SYS_I2C_UCODE_PATCH, CONFIG_SYS_I2C_DPMEM_OFFSET [0x1FC0]:
 		enable I2C microcode relocation patch (MPC8xx);
 		define relocation offset in DPRAM [DSP2]
 
-- CFG_SMC_UCODE_PATCH, CFG_SMC_DPMEM_OFFSET [0x1FC0]:
+- CONFIG_SYS_SMC_UCODE_PATCH, CONFIG_SYS_SMC_DPMEM_OFFSET [0x1FC0]:
 		enable SMC microcode relocation patch (MPC8xx);
 		define relocation offset in DPRAM [SMC1]
 
-- CFG_SPI_UCODE_PATCH, CFG_SPI_DPMEM_OFFSET [0x1FC0]:
+- CONFIG_SYS_SPI_UCODE_PATCH, CONFIG_SYS_SPI_DPMEM_OFFSET [0x1FC0]:
 		enable SPI microcode relocation patch (MPC8xx);
 		define relocation offset in DPRAM [SCC4]
 
-- CFG_USE_OSCCLK:
+- CONFIG_SYS_USE_OSCCLK:
 		Use OSCM clock mode on MBX8xx board. Be careful,
 		wrong setting might damage your board. Read
 		doc/README.MBX before setting this variable!
 
-- CFG_CPM_POST_WORD_ADDR: (MPC8xx, MPC8260 only)
+- CONFIG_SYS_CPM_POST_WORD_ADDR: (MPC8xx, MPC8260 only)
 		Offset of the bootmode word in DPRAM used by post
 		(Power On Self Tests). This definition overrides
 		#define'd default value in commproc.h resp.
 		cpm_8260.h.
 
-- CFG_PCI_SLV_MEM_LOCAL, CFG_PCI_SLV_MEM_BUS, CFG_PICMR0_MASK_ATTRIB,
-  CFG_PCI_MSTR0_LOCAL, CFG_PCIMSK0_MASK, CFG_PCI_MSTR1_LOCAL,
-  CFG_PCIMSK1_MASK, CFG_PCI_MSTR_MEM_LOCAL, CFG_PCI_MSTR_MEM_BUS,
-  CFG_CPU_PCI_MEM_START, CFG_PCI_MSTR_MEM_SIZE, CFG_POCMR0_MASK_ATTRIB,
-  CFG_PCI_MSTR_MEMIO_LOCAL, CFG_PCI_MSTR_MEMIO_BUS, CPU_PCI_MEMIO_START,
-  CFG_PCI_MSTR_MEMIO_SIZE, CFG_POCMR1_MASK_ATTRIB, CFG_PCI_MSTR_IO_LOCAL,
-  CFG_PCI_MSTR_IO_BUS, CFG_CPU_PCI_IO_START, CFG_PCI_MSTR_IO_SIZE,
-  CFG_POCMR2_MASK_ATTRIB: (MPC826x only)
+- CONFIG_SYS_PCI_SLV_MEM_LOCAL, CONFIG_SYS_PCI_SLV_MEM_BUS, CONFIG_SYS_PICMR0_MASK_ATTRIB,
+  CONFIG_SYS_PCI_MSTR0_LOCAL, CONFIG_SYS_PCIMSK0_MASK, CONFIG_SYS_PCI_MSTR1_LOCAL,
+  CONFIG_SYS_PCIMSK1_MASK, CONFIG_SYS_PCI_MSTR_MEM_LOCAL, CONFIG_SYS_PCI_MSTR_MEM_BUS,
+  CONFIG_SYS_CPU_PCI_MEM_START, CONFIG_SYS_PCI_MSTR_MEM_SIZE, CONFIG_SYS_POCMR0_MASK_ATTRIB,
+  CONFIG_SYS_PCI_MSTR_MEMIO_LOCAL, CONFIG_SYS_PCI_MSTR_MEMIO_BUS, CPU_PCI_MEMIO_START,
+  CONFIG_SYS_PCI_MSTR_MEMIO_SIZE, CONFIG_SYS_POCMR1_MASK_ATTRIB, CONFIG_SYS_PCI_MSTR_IO_LOCAL,
+  CONFIG_SYS_PCI_MSTR_IO_BUS, CONFIG_SYS_CPU_PCI_IO_START, CONFIG_SYS_PCI_MSTR_IO_SIZE,
+  CONFIG_SYS_POCMR2_MASK_ATTRIB: (MPC826x only)
 		Overrides the default PCI memory map in cpu/mpc8260/pci.c if set.
 
 - CONFIG_SPD_EEPROM
@@ -2465,16 +2577,16 @@ Low Level (hardware related) configuration options:
   SPD_EEPROM_ADDRESS
 		I2C address of the SPD EEPROM
 
-- CFG_SPD_BUS_NUM
+- CONFIG_SYS_SPD_BUS_NUM
 		If SPD EEPROM is on an I2C bus other than the first
 		one, specify here. Note that the value must resolve
 		to something your driver can deal with.
 
-- CFG_83XX_DDR_USES_CS0
+- CONFIG_SYS_83XX_DDR_USES_CS0
 		Only for 83xx systems. If specified, then DDR should
 		be configured using CS0 and CS1 instead of CS2 and CS3.
 
-- CFG_83XX_DDR_USES_CS0
+- CONFIG_SYS_83XX_DDR_USES_CS0
 		Only for 83xx systems. If specified, then DDR should
 		be configured using CS0 and CS1 instead of CS2 and CS3.
 
@@ -2774,7 +2886,7 @@ Some configuration options can be set using Environment Variables:
 		  for use by the bootm command. See also "bootm_size"
 		  environment variable. Address defined by "bootm_low" is
 		  also the base of the initial memory mapping for the Linux
-		  kernel -- see the description of CFG_BOOTMAPSZ.
+		  kernel -- see the description of CONFIG_SYS_BOOTMAPSZ.
 
   bootm_size	- Memory range available for image processing in the bootm
 		  command can be restricted. This variable is given as
@@ -2782,6 +2894,10 @@ Some configuration options can be set using Environment Variables:
 		  allowed for use by the bootm command. See also "bootm_low"
 		  environment variable.
 
+  updatefile	- Location of the software update file on a TFTP server, used
+		  by the automatic software update feature. Please refer to
+		  documentation in doc/README.update for more details.
+
   autoload	- if set to "no" (any string beginning with 'n'),
 		  "bootp" will just load perform a lookup of the
 		  configuration from the BOOTP server, but not try to
@@ -2818,7 +2934,7 @@ Some configuration options can be set using Environment Variables:
 		  is usually what you want since it allows for
 		  maximum initrd size. If for some reason you want to
 		  make sure that the initrd image is loaded below the
-		  CFG_BOOTMAPSZ limit, you can set this environment
+		  CONFIG_SYS_BOOTMAPSZ limit, you can set this environment
 		  variable to a value of "no" or "off" or "0".
 		  Alternatively, you can set it to a maximum upper
 		  address to use (U-Boot will still check that it
@@ -3030,8 +3146,9 @@ details; basically, the header defines the following image properties:
 
 * Target Operating System (Provisions for OpenBSD, NetBSD, FreeBSD,
   4.4BSD, Linux, SVR4, Esix, Solaris, Irix, SCO, Dell, NCR, VxWorks,
-  LynxOS, pSOS, QNX, RTEMS, ARTOS;
-  Currently supported: Linux, NetBSD, VxWorks, QNX, RTEMS, ARTOS, LynxOS).
+  LynxOS, pSOS, QNX, RTEMS, INTEGRITY;
+  Currently supported: Linux, NetBSD, VxWorks, QNX, RTEMS, LynxOS,
+  INTEGRITY).
 * Target CPU Architecture (Provisions for Alpha, ARM, AVR32, Intel x86,
   IA64, MIPS, NIOS, PowerPC, IBM S390, SuperH, Sparc, Sparc 64 Bit;
   Currently supported: ARM, AVR32, Intel x86, MIPS, NIOS, PowerPC).
@@ -3089,9 +3206,9 @@ But now you can ignore ALL boot loader code (in arch/ppc/mbxboot).
 
 Just make sure your machine specific header file (for instance
 include/asm-ppc/tqm8xx.h) includes the same definition of the Board
-Information structure as we define in include/u-boot.h, and make
-sure that your definition of IMAP_ADDR uses the same value as your
-U-Boot configuration in CFG_IMMR.
+Information structure as we define in include/asm-<arch>/u-boot.h,
+and make sure that your definition of IMAP_ADDR uses the same value
+as your U-Boot configuration in CONFIG_SYS_IMMR.
 
 
 Configuring the Linux kernel:
@@ -3638,7 +3755,7 @@ locked as (mis-) used as memory, etc.
 	cause you grief during the initial boot! It is frequently not
 	used.
 
-	CFG_INIT_RAM_ADDR should be somewhere that won't interfere
+	CONFIG_SYS_INIT_RAM_ADDR should be somewhere that won't interfere
 	with your processor/board/system design. The default value
 	you will find in any recent u-boot distribution in
 	walnut.h should work for you. I'd set it to a value larger
@@ -3735,7 +3852,7 @@ U-Boot is installed in the first 128 kB of the first Flash bank (on
 TQM8xxL modules this is the range 0x40000000 ... 0x4001FFFF). After
 booting and sizing and initializing DRAM, the code relocates itself
 to the upper end of DRAM. Immediately below the U-Boot code some
-memory is reserved for use by malloc() [see CFG_MALLOC_LEN
+memory is reserved for use by malloc() [see CONFIG_SYS_MALLOC_LEN
 configuration setting]. Below that, a structure with global Board
 Info data is placed, followed by the stack (growing downward).
 
diff --git a/README.nios_CONFIG_SYS_NIOS_CPU b/README.nios_CONFIG_SYS_NIOS_CPU
new file mode 100644
index 000000000..3547c343b
--- /dev/null
+++ b/README.nios_CONFIG_SYS_NIOS_CPU
@@ -0,0 +1,140 @@
+
+===============================================================================
+	C F G _ N I O S _ C P U _ *   v s .   N I O S	S D K
+===============================================================================
+
+When ever you have to make a new NIOS CPU configuration you can use this table
+as a reference list to the original NIOS SDK symbols made by Alteras SOPC
+Builder. Look into excalibur.h and excalibur.s in your SDK path cpu_sdk/inc.
+Symbols beginning with a '[ptf]:' are coming from your SOPC sytem description
+(PTF file) in sections WIZARD_SCRIPT_ARGUMENTS or SYSTEM_BUILDER_INFO.
+
+C O R E					N I O S	  S D K			[1],[7]
+-------------------------------------------------------------------------------
+CONFIG_SYS_NIOS_CPU_CLK					nasys_clock_freq
+CONFIG_SYS_NIOS_CPU_ICACHE					nasys_icache_size
+CONFIG_SYS_NIOS_CPU_DCACHE					nasys_dcache_size
+CONFIG_SYS_NIOS_CPU_REG_NUMS					nasys_nios_num_regs
+CONFIG_SYS_NIOS_CPU_MUL					__nios_use_multiply__
+CONFIG_SYS_NIOS_CPU_MSTEP					__nios_use_mstep__
+CONFIG_SYS_NIOS_CPU_STACK					nasys_stack_top
+CONFIG_SYS_NIOS_CPU_VEC_BASE					nasys_vector_table
+CONFIG_SYS_NIOS_CPU_VEC_SIZE					nasys_vector_table_size
+CONFIG_SYS_NIOS_CPU_VEC_NUMS
+CONFIG_SYS_NIOS_CPU_RST_VECT					nasys_reset_address
+CONFIG_SYS_NIOS_CPU_DBG_CORE					nasys_debug_core
+CONFIG_SYS_NIOS_CPU_RAM_BASE		na_onchip_ram_64_kbytes
+CONFIG_SYS_NIOS_CPU_RAM_SIZE		na_onchip_ram_64_kbytes_size
+CONFIG_SYS_NIOS_CPU_ROM_BASE		na_boot_monitor_rom
+CONFIG_SYS_NIOS_CPU_ROM_SIZE		na_boot_monitor_rom_size
+CONFIG_SYS_NIOS_CPU_OCI_BASE					nasys_oci_core
+CONFIG_SYS_NIOS_CPU_OCI_SIZE
+CONFIG_SYS_NIOS_CPU_SRAM_BASE		na_ext_ram		nasys_program_mem
+							nasys_data_mem
+CONFIG_SYS_NIOS_CPU_SRAM_SIZE		na_ext_ram_size		nasys_program_mem_size
+							nasys_data_mem_size
+CONFIG_SYS_NIOS_CPU_SDRAM_BASE		 na_sdram
+CONFIG_SYS_NIOS_CPU_SDRAM_SIZE		 na_sdram_size
+CONFIG_SYS_NIOS_CPU_FLASH_BASE		 na_ext_flash		nasys_main_flash
+							nasys_am29lv065d_flash_0
+							nasys_flash_0
+CONFIG_SYS_NIOS_CPU_FLASH_SIZE	    na_ext_flash_size		nasys_main_flash_size
+
+T I M E R				N I O S	  S D K			    [3]
+-------------------------------------------------------------------------------
+CONFIG_SYS_NIOS_CPU_TIMER_NUMS					nasys_timer_count
+CONFIG_SYS_NIOS_CPU_TIMER[0-9]					nasys_timer_[0-9]
+CONFIG_SYS_NIOS_CPU_TIMER[0-9]_IRQ				nasys_timer_[0-9]_irq
+CONFIG_SYS_NIOS_CPU_TIMER[0-9]_PER				[ptf]:period
+							[ptf]:period_units
+							[ptf]:mult
+CONFIG_SYS_NIOS_CPU_TIMER[0-9]_AR				[ptf]:always_run
+CONFIG_SYS_NIOS_CPU_TIMER[0-9]_FP				[ptf]:fixed_period
+CONFIG_SYS_NIOS_CPU_TIMER[0-9]_SS				[ptf]:snapshot
+
+U A R T					N I O S	  S D K			    [2]
+-------------------------------------------------------------------------------
+CONFIG_SYS_NIOS_CPU_UART_NUMS					nasys_uart_count
+CONFIG_SYS_NIOS_CPU_UART[0-9]					nasys_uart_[0-9]
+CONFIG_SYS_NIOS_CPU_UART[0-9]_IRQ				nasys_uart_[0-9]_irq
+CONFIG_SYS_NIOS_CPU_UART[0-9]_BR				[ptf]:baud
+CONFIG_SYS_NIOS_CPU_UART[0-9]_DB				[ptf]:data_bits
+CONFIG_SYS_NIOS_CPU_UART[0-9]_SB				[ptf]:stop_bits
+CONFIG_SYS_NIOS_CPU_UART[0-9]_PA				[ptf]:parity
+CONFIG_SYS_NIOS_CPU_UART[0-9]_HS				[ptf]:use_cts_rts
+CONFIG_SYS_NIOS_CPU_UART[0-9]_EOP				[ptf]:use_eop_register
+
+P I O					N I O S	  S D K			    [4]
+-------------------------------------------------------------------------------
+CONFIG_SYS_NIOS_CPU_PIO_NUMS					nasys_pio_count
+CONFIG_SYS_NIOS_CPU_PIO[0-9]					nasys_pio_[0-9]
+CONFIG_SYS_NIOS_CPU_PIO[0-9]_IRQ				nasys_pio_[0-9]_irq
+CONFIG_SYS_NIOS_CPU_PIO[0-9]_BITS				[ptf]:Data_Width
+CONFIG_SYS_NIOS_CPU_PIO[0-9]_TYPE				[ptf]:has_tri
+							[ptf]:has_out
+							[ptf]:has_in
+CONFIG_SYS_NIOS_CPU_PIO[0-9]_CAP				[ptf]:capture
+CONFIG_SYS_NIOS_CPU_PIO[0-9]_EDGE				[ptf]:edge_type
+CONFIG_SYS_NIOS_CPU_PIO[0-9]_ITYPE				[ptf]:irq_type
+
+S P I					N I O S	  S D K			    [6]
+-------------------------------------------------------------------------------
+CONFIG_SYS_NIOS_CPU_SPI_NUMS					nasys_spi_count
+CONFIG_SYS_NIOS_CPU_SPI[0-9]					nasys_spi_[0-9]
+CONFIG_SYS_NIOS_CPU_SPI[0-9]_IRQ				nasys_spi_[0-9]_irq
+CONFIG_SYS_NIOS_CPU_SPI[0-9]_BITS				[ptf]:databits
+CONFIG_SYS_NIOS_CPU_SPI[0-9]_MA				[ptf]:ismaster
+CONFIG_SYS_NIOS_CPU_SPI[0-9]_SLN				[ptf]:numslaves
+CONFIG_SYS_NIOS_CPU_SPI[0-9]_TCLK				[ptf]:targetclock
+CONFIG_SYS_NIOS_CPU_SPI[0-9]_TDELAY				[ptf]:targetdelay
+CONFIG_SYS_NIOS_CPU_SPI[0-9]_*					[ptf]:*
+
+I D E					N I O S	  S D K
+-------------------------------------------------------------------------------
+CONFIG_SYS_NIOS_CPU_IDE_NUMS					nasys_usersocket_count
+CONFIG_SYS_NIOS_CPU_IDE[0-9]					nasys_usersocket_[0-9]
+
+A S M I					N I O S	  S D K			    [5]
+-------------------------------------------------------------------------------
+CONFIG_SYS_NIOS_CPU_ASMI_NUMS					nasys_asmi_count
+CONFIG_SYS_NIOS_CPU_ASMI[0-9]					nasys_asmi_[0-9]
+CONFIG_SYS_NIOS_CPU_ASMI[0-9]_IRQ				nasys_asmi_[0-9]_irq
+
+E t h e r n e t	  ( L A N )		N I O S	  S D K
+-------------------------------------------------------------------------------
+CONFIG_SYS_NIOS_CPU_LAN_NUMS
+CONFIG_SYS_NIOS_CPU_LAN[0-9]_BASE	na_lan91c111
+CONFIG_SYS_NIOS_CPU_LAN[0-9]_OFFS				LAN91C111_REGISTERS_OFFSET
+CONFIG_SYS_NIOS_CPU_LAN[0-9]_IRQ	na_lan91c111_irq
+CONFIG_SYS_NIOS_CPU_LAN[0-9]_BUSW				LAN91C111_DATA_BUS_WIDTH
+CONFIG_SYS_NIOS_CPU_LAN[0-9]_TYPE
+
+s y s t e m   c o m p o s i n g		N I O S	  S D K
+-------------------------------------------------------------------------------
+CONFIG_SYS_NIOS_CPU_TICK_TIMER		(na_low_priority_timer2)
+CONFIG_SYS_NIOS_CPU_USER_TIMER		(na_timer1)
+CONFIG_SYS_NIOS_CPU_BUTTON_PIO		(na_button_pio)
+CONFIG_SYS_NIOS_CPU_LCD_PIO		(na_lcd_pio)
+CONFIG_SYS_NIOS_CPU_LED_PIO		(na_led_pio)
+CONFIG_SYS_NIOS_CPU_SEVENSEG_PIO	(na_seven_seg_pio)
+CONFIG_SYS_NIOS_CPU_RECONF_PIO		(na_reconfig_request_pio)
+CONFIG_SYS_NIOS_CPU_CFPRESENT_PIO	(na_cf_present_pio)
+CONFIG_SYS_NIOS_CPU_CFPOWER_PIO	(na_cf_power_pio)
+CONFIG_SYS_NIOS_CPU_CFATASEL_PIO	(na_cf_ata_select_pio)
+CONFIG_SYS_NIOS_CPU_USER_SPI		(na_spi)
+
+
+===============================================================================
+	R E F E R E N C E S
+===============================================================================
+[1]	http://www.altera.com/literature/ds/ds_nioscpu.pdf
+[2]	http://www.altera.com/literature/ds/ds_nios_uart.pdf
+[3]	http://www.altera.com/literature/ds/ds_nios_timer.pdf
+[4]	http://www.altera.com/literature/ds/ds_nios_pio.pdf
+[5]	http://www.altera.com/literature/ds/ds_nios_asmi.pdf
+[6]	http://www.altera.com/literature/ds/ds_nios_spi.pdf
+[7]	http://www.altera.com/literature/ds/ds_legacy_sdram_ctrl.pdf
+
+
+===============================================================================
+Stephan Linz <linz@li-pro.net>
diff --git a/api/api.c b/api/api.c
index 19c71540c..f51ebb7b1 100644
--- a/api/api.c
+++ b/api/api.c
@@ -534,7 +534,7 @@ static int API_env_enum(va_list ap)
 
 		for (i = 0; env_get_char(i) != '\0'; i = n + 1) {
 			for (n = i; env_get_char(n) != '\0'; ++n) {
-				if (n >= CFG_ENV_SIZE) {
+				if (n >= CONFIG_ENV_SIZE) {
 					/* XXX shouldn't we set *next = NULL?? */
 					return 0;
 				}
diff --git a/api/api_platform-ppc.c b/api/api_platform-ppc.c
index ca9f9a5cd..611a01b5e 100644
--- a/api/api_platform-ppc.c
+++ b/api/api_platform-ppc.c
@@ -66,7 +66,7 @@ int platform_sys_info(struct sys_info *si)
 	si->bar = gd->bd->bi_bar;
 #undef bi_bar
 #else
-	si->bar = NULL;
+	si->bar = 0;
 #endif
 
 	platform_set_mr(si, gd->bd->bi_memstart, gd->bd->bi_memsize, MR_ATTR_DRAM);
diff --git a/api/api_storage.c b/api/api_storage.c
index 74391a59d..6fac98bff 100644
--- a/api/api_storage.c
+++ b/api/api_storage.c
@@ -30,6 +30,10 @@
 #include <common.h>
 #include <api_public.h>
 
+#if defined(CONFIG_CMD_USB) && defined(CONFIG_USB_STORAGE)
+#include <usb.h>
+#endif
+
 #define DEBUG
 #undef DEBUG
 
@@ -63,28 +67,28 @@ static struct stor_spec specs[ENUM_MAX] = { { 0, 0, 0, 0, "" }, };
 void dev_stor_init(void)
 {
 #if defined(CONFIG_CMD_IDE)
-	specs[ENUM_IDE].max_dev = CFG_IDE_MAXDEVICE;
+	specs[ENUM_IDE].max_dev = CONFIG_SYS_IDE_MAXDEVICE;
 	specs[ENUM_IDE].enum_started = 0;
 	specs[ENUM_IDE].enum_ended = 0;
 	specs[ENUM_IDE].type = DEV_TYP_STOR | DT_STOR_IDE;
 	specs[ENUM_IDE].name = "ide";
 #endif
 #if defined(CONFIG_CMD_MMC)
-	specs[ENUM_MMC].max_dev = CFG_MMC_MAX_DEVICE;
+	specs[ENUM_MMC].max_dev = CONFIG_SYS_MMC_MAX_DEVICE;
 	specs[ENUM_MMC].enum_started = 0;
 	specs[ENUM_MMC].enum_ended = 0;
 	specs[ENUM_MMC].type = DEV_TYP_STOR | DT_STOR_MMC;
 	specs[ENUM_MMC].name = "mmc";
 #endif
 #if defined(CONFIG_CMD_SATA)
-	specs[ENUM_SATA].max_dev = CFG_SATA_MAX_DEVICE;
+	specs[ENUM_SATA].max_dev = CONFIG_SYS_SATA_MAX_DEVICE;
 	specs[ENUM_SATA].enum_started = 0;
 	specs[ENUM_SATA].enum_ended = 0;
 	specs[ENUM_SATA].type = DEV_TYP_STOR | DT_STOR_SATA;
 	specs[ENUM_SATA].name = "sata";
 #endif
 #if defined(CONFIG_CMD_SCSI)
-	specs[ENUM_SCSI].max_dev = CFG_SCSI_MAX_DEVICE;
+	specs[ENUM_SCSI].max_dev = CONFIG_SYS_SCSI_MAX_DEVICE;
 	specs[ENUM_SCSI].enum_started = 0;
 	specs[ENUM_SCSI].enum_ended = 0;
 	specs[ENUM_SCSI].type = DEV_TYP_STOR | DT_STOR_SCSI;
diff --git a/blackfin_config.mk b/blackfin_config.mk
index a9a3d1a17..c8be75e08 100644
--- a/blackfin_config.mk
+++ b/blackfin_config.mk
@@ -24,7 +24,7 @@
 CONFIG_BFIN_CPU := $(strip $(subst ",,$(CONFIG_BFIN_CPU)))
 CONFIG_BFIN_BOOT_MODE := $(strip $(subst ",,$(CONFIG_BFIN_BOOT_MODE)))
 
-PLATFORM_RELFLAGS += -ffixed-P5
+PLATFORM_RELFLAGS += -ffixed-P5 -fomit-frame-pointer
 PLATFORM_CPPFLAGS += -DCONFIG_BLACKFIN
 
 ifneq (,$(CONFIG_BFIN_CPU))
diff --git a/board/AtmarkTechno/suzaku/flash.c b/board/AtmarkTechno/suzaku/flash.c
index 49a06733a..ce6fae01b 100644
--- a/board/AtmarkTechno/suzaku/flash.c
+++ b/board/AtmarkTechno/suzaku/flash.c
@@ -24,7 +24,7 @@
 
 #include <common.h>
 
-flash_info_t flash_info[CFG_MAX_FLASH_BANKS];
+flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];
 
 unsigned long flash_init(void)
 {
diff --git a/board/AtmarkTechno/suzaku/u-boot.lds b/board/AtmarkTechno/suzaku/u-boot.lds
index cb90854a3..b38f64877 100644
--- a/board/AtmarkTechno/suzaku/u-boot.lds
+++ b/board/AtmarkTechno/suzaku/u-boot.lds
@@ -61,6 +61,7 @@ SECTIONS
 	{
 		__bss_start = .;
 		*(.bss)
+		. = ALIGN(4);
 		__bss_end = .;
 	}
 	__end = . ;
diff --git a/board/BuS/EB+MCF-EV123/EB+MCF-EV123.c b/board/BuS/EB+MCF-EV123/EB+MCF-EV123.c
index 39c97b1f5..d509a8fdb 100644
--- a/board/BuS/EB+MCF-EV123/EB+MCF-EV123.c
+++ b/board/BuS/EB+MCF-EV123/EB+MCF-EV123.c
@@ -32,7 +32,7 @@
 int checkboard (void)
 {
 	puts ("Board: MCF-EV1 + MCF-EV23 (BuS Elektronik GmbH & Co. KG)\n");
-#if (TEXT_BASE ==  CFG_INT_FLASH_BASE)
+#if (TEXT_BASE ==  CONFIG_SYS_INT_FLASH_BASE)
 	puts ("       Boot from Internal FLASH\n");
 #endif
 
@@ -45,10 +45,10 @@ phys_size_t initdram (int board_type)
 
 	size = 0;
 	MCFSDRAMC_DCR = MCFSDRAMC_DCR_RTIM_6
-			| MCFSDRAMC_DCR_RC ((15 * CFG_CLK) >> 4);
-#ifdef CFG_SDRAM_BASE0
+			| MCFSDRAMC_DCR_RC ((15 * CONFIG_SYS_CLK) >> 4);
+#ifdef CONFIG_SYS_SDRAM_BASE0
 
-	MCFSDRAMC_DACR0 = MCFSDRAMC_DACR_BASE (CFG_SDRAM_BASE0)
+	MCFSDRAMC_DACR0 = MCFSDRAMC_DACR_BASE (CONFIG_SYS_SDRAM_BASE0)
 			| MCFSDRAMC_DACR_CASL (1)
 			| MCFSDRAMC_DACR_CBM (3)
 			| MCFSDRAMC_DACR_PS_16;
@@ -57,17 +57,17 @@ phys_size_t initdram (int board_type)
 
 	MCFSDRAMC_DACR0 |= MCFSDRAMC_DACR_IP;
 
-	*(unsigned short *) (CFG_SDRAM_BASE0) = 0xA5A5;
+	*(unsigned short *) (CONFIG_SYS_SDRAM_BASE0) = 0xA5A5;
 	MCFSDRAMC_DACR0 |= MCFSDRAMC_DACR_RE;
 	for (i = 0; i < 2000; i++)
 		asm (" nop");
 	mbar_writeLong (MCFSDRAMC_DACR0,
 			mbar_readLong (MCFSDRAMC_DACR0) | MCFSDRAMC_DACR_IMRS);
-	*(unsigned int *) (CFG_SDRAM_BASE0 + 0x220) = 0xA5A5;
-	size += CFG_SDRAM_SIZE * 1024 * 1024;
+	*(unsigned int *) (CONFIG_SYS_SDRAM_BASE0 + 0x220) = 0xA5A5;
+	size += CONFIG_SYS_SDRAM_SIZE * 1024 * 1024;
 #endif
-#ifdef CFG_SDRAM_BASE1
-	MCFSDRAMC_DACR1 = MCFSDRAMC_DACR_BASE (CFG_SDRAM_BASE1)
+#ifdef CONFIG_SYS_SDRAM_BASE1
+	MCFSDRAMC_DACR1 = MCFSDRAMC_DACR_BASE (CONFIG_SYS_SDRAM_BASE1)
 			| MCFSDRAMC_DACR_CASL (1)
 			| MCFSDRAMC_DACR_CBM (3)
 			| MCFSDRAMC_DACR_PS_16;
@@ -76,25 +76,25 @@ phys_size_t initdram (int board_type)
 
 	MCFSDRAMC_DACR1 |= MCFSDRAMC_DACR_IP;
 
-	*(unsigned short *) (CFG_SDRAM_BASE1) = 0xA5A5;
+	*(unsigned short *) (CONFIG_SYS_SDRAM_BASE1) = 0xA5A5;
 	MCFSDRAMC_DACR1 |= MCFSDRAMC_DACR_RE;
 
 	for (i = 0; i < 2000; i++)
 		asm (" nop");
 
 	MCFSDRAMC_DACR1 |= MCFSDRAMC_DACR_IMRS;
-	*(unsigned int *) (CFG_SDRAM_BASE1 + 0x220) = 0xA5A5;
-	size += CFG_SDRAM_SIZE1 * 1024 * 1024;
+	*(unsigned int *) (CONFIG_SYS_SDRAM_BASE1 + 0x220) = 0xA5A5;
+	size += CONFIG_SYS_SDRAM_SIZE1 * 1024 * 1024;
 #endif
 	return size;
 }
 
 
-#if defined(CFG_DRAM_TEST)
+#if defined(CONFIG_SYS_DRAM_TEST)
 int testdram (void)
 {
-	uint *pstart = (uint *) CFG_MEMTEST_START;
-	uint *pend = (uint *) CFG_MEMTEST_END;
+	uint *pstart = (uint *) CONFIG_SYS_MEMTEST_START;
+	uint *pend = (uint *) CONFIG_SYS_MEMTEST_END;
 	uint *p;
 
 	printf("SDRAM test phase 1:\n");
diff --git a/board/BuS/EB+MCF-EV123/Makefile b/board/BuS/EB+MCF-EV123/Makefile
index ceeffa775..ed3ac0755 100644
--- a/board/BuS/EB+MCF-EV123/Makefile
+++ b/board/BuS/EB+MCF-EV123/Makefile
@@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk
 
 LIB	= $(obj)lib$(BOARD).a
 
-COBJS	= $(BOARD).o cfm_flash.o flash.o VCxK.o mii.o
+COBJS	= $(BOARD).o cfm_flash.o flash.o VCxK.o
 
 SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
 OBJS	:= $(addprefix $(obj),$(COBJS))
diff --git a/board/BuS/EB+MCF-EV123/VCxK.c b/board/BuS/EB+MCF-EV123/VCxK.c
index 4b46b7c9a..f2fe353db 100644
--- a/board/BuS/EB+MCF-EV123/VCxK.c
+++ b/board/BuS/EB+MCF-EV123/VCxK.c
@@ -25,7 +25,7 @@
 #include <asm/m5282.h>
 #include "VCxK.h"
 
-vu_char *vcxk_bws = (vu_char *)(CFG_CS3_BASE);
+vu_char *vcxk_bws = (vu_char *)(CONFIG_SYS_CS3_BASE);
 #define VCXK_BWS vcxk_bws
 
 static ulong vcxk_driver;
diff --git a/board/BuS/EB+MCF-EV123/cfm_flash.c b/board/BuS/EB+MCF-EV123/cfm_flash.c
index 98e563fc5..fe03b1758 100644
--- a/board/BuS/EB+MCF-EV123/cfm_flash.c
+++ b/board/BuS/EB+MCF-EV123/cfm_flash.c
@@ -28,14 +28,14 @@
 
 #if defined(CONFIG_M5281) || defined(CONFIG_M5282)
 
-#if (CFG_CLK>20000000)
-	#define CFM_CLK  (((long) CFG_CLK / (400000 * 8) + 1) | 0x40)
+#if (CONFIG_SYS_CLK>20000000)
+	#define CFM_CLK  (((long) CONFIG_SYS_CLK / (400000 * 8) + 1) | 0x40)
 #else
-	#define CFM_CLK  ((long) CFG_CLK / 400000 + 1)
+	#define CFM_CLK  ((long) CONFIG_SYS_CLK / 400000 + 1)
 #endif
 
 #define cmf_backdoor_address(addr)	(((addr) & 0x0007FFFF) | 0x04000000 | \
-					 (CFG_MBAR & 0xC0000000))
+					 (CONFIG_SYS_MBAR & 0xC0000000))
 
 void cfm_flash_print_info (flash_info_t * info)
 {
@@ -60,8 +60,8 @@ void cfm_flash_init (flash_info_t * info)
 	MCFCFM_MCR = 0;
 	MCFCFM_CLKD = CFM_CLK;
 	debug ("CFM Clock divider: %ld (%d Hz @ %ld Hz)\n",CFM_CLK,\
-		CFG_CLK / (2* ((CFM_CLK & 0x3F)+1) * (1+((CFM_CLK & 0x40)>>6)*7)),\
-		CFG_CLK);
+		CONFIG_SYS_CLK / (2* ((CFM_CLK & 0x3F)+1) * (1+((CFM_CLK & 0x40)>>6)*7)),\
+		CONFIG_SYS_CLK);
 	MCFCFM_SACC = 0;
 	MCFCFM_DACC = 0;
 
@@ -86,7 +86,7 @@ void cfm_flash_init (flash_info_t * info)
 	{
 		if (sector == 0)
 		{
-			info->start[sector] = CFG_INT_FLASH_BASE;
+			info->start[sector] = CONFIG_SYS_INT_FLASH_BASE;
 		}
 		else
 		{
@@ -187,7 +187,7 @@ int cfm_flash_write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cn
 	return rc;
 }
 
-#ifdef CFG_FLASH_PROTECTION
+#ifdef CONFIG_SYS_FLASH_PROTECTION
 
 int cfm_flash_protect(flash_info_t * info,long sector,int prot)
 {
diff --git a/board/BuS/EB+MCF-EV123/cfm_flash.h b/board/BuS/EB+MCF-EV123/cfm_flash.h
index cc8cdbd1e..ed4e7943e 100644
--- a/board/BuS/EB+MCF-EV123/cfm_flash.h
+++ b/board/BuS/EB+MCF-EV123/cfm_flash.h
@@ -33,7 +33,7 @@ extern void cfm_flash_print_info (flash_info_t * info);
 extern int cfm_flash_erase_sector (flash_info_t * info, int sector);
 extern void cfm_flash_init (flash_info_t * info);
 extern int cfm_flash_write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt);
-#ifdef CFG_FLASH_PROTECTION
+#ifdef CONFIG_SYS_FLASH_PROTECTION
 extern int cfm_flash_protect(flash_info_t * info,long sector,int prot);
 #endif
 
diff --git a/board/BuS/EB+MCF-EV123/flash.c b/board/BuS/EB+MCF-EV123/flash.c
index c2a1b6ff6..3c36367d7 100644
--- a/board/BuS/EB+MCF-EV123/flash.c
+++ b/board/BuS/EB+MCF-EV123/flash.c
@@ -27,10 +27,10 @@
 #include <common.h>
 #include  "cfm_flash.h"
 
-#define PHYS_FLASH_1 CFG_FLASH_BASE
+#define PHYS_FLASH_1 CONFIG_SYS_FLASH_BASE
 #define FLASH_BANK_SIZE 0x200000
 
-flash_info_t flash_info[CFG_MAX_FLASH_BANKS];
+flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];
 
 void flash_print_info (flash_info_t * info)
 {
@@ -83,7 +83,7 @@ unsigned long flash_init (void)
 	int i, j;
 	ulong size = 0;
 
-	for (i = 0; i < CFG_MAX_FLASH_BANKS; i++) {
+	for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) {
 		ulong flashbase = 0;
 
 		switch (i)
@@ -93,8 +93,8 @@ unsigned long flash_init (void)
 				(AMD_MANUFACT & FLASH_VENDMASK) |
 				(AMD_ID_LV160B & FLASH_TYPEMASK);
 			flash_info[i].size = FLASH_BANK_SIZE;
-			flash_info[i].sector_count = CFG_MAX_FLASH_SECT;
-			memset (flash_info[i].protect, 0, CFG_MAX_FLASH_SECT);
+			flash_info[i].sector_count = CONFIG_SYS_MAX_FLASH_SECT;
+			memset (flash_info[i].protect, 0, CONFIG_SYS_MAX_FLASH_SECT);
 			flashbase = PHYS_FLASH_1;
 			for (j = 0; j < flash_info[i].sector_count; j++) {
 				if (j == 0) {
@@ -128,8 +128,8 @@ unsigned long flash_init (void)
 	}
 
 	flash_protect (FLAG_PROTECT_SET,
-		       CFG_FLASH_BASE,
-		       CFG_FLASH_BASE + 0xffff, &flash_info[0]);
+		       CONFIG_SYS_FLASH_BASE,
+		       CONFIG_SYS_FLASH_BASE + 0xffff, &flash_info[0]);
 
 	return size;
 }
@@ -177,7 +177,7 @@ int amd_flash_erase_sector(flash_info_t * info, int sector)
 		result = *addr;
 
 		/* check timeout */
-		if (get_timer (0) > CFG_FLASH_ERASE_TOUT) {
+		if (get_timer (0) > CONFIG_SYS_FLASH_ERASE_TOUT) {
 			MEM_FLASH_ADDR1 = CMD_READ_ARRAY;
 			state = ERR_TIMOUT;
 		}
@@ -303,7 +303,7 @@ volatile static int amd_write_word (flash_info_t * info, ulong dest, u16 data)
 		result = *addr;
 
 		/* check timeout */
-		if (get_timer (0) > CFG_FLASH_ERASE_TOUT) {
+		if (get_timer (0) > CONFIG_SYS_FLASH_ERASE_TOUT) {
 				state = ERR_TIMOUT;
 		}
 		if (!state && ((result & BIT_RDY_MASK) == (data & BIT_RDY_MASK)))
@@ -390,7 +390,7 @@ int amd_flash_protect(flash_info_t * info,long sector,int prot)
 	return rc;
 }
 
-#ifdef CFG_FLASH_PROTECTION
+#ifdef CONFIG_SYS_FLASH_PROTECTION
 
 int flash_real_protect(flash_info_t * info,long sector,int prot)
 {
diff --git a/board/BuS/EB+MCF-EV123/mii.c b/board/BuS/EB+MCF-EV123/mii.c
deleted file mode 100644
index 8ae2ec69c..000000000
--- a/board/BuS/EB+MCF-EV123/mii.c
+++ /dev/null
@@ -1,304 +0,0 @@
-/*
- * Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
- * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/fec.h>
-#include <asm/immap.h>
-
-#include <config.h>
-#include <net.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#if defined(CONFIG_CMD_NET) && defined(CONFIG_NET_MULTI)
-#undef MII_DEBUG
-#undef ET_DEBUG
-
-int fecpin_setclear(struct eth_device *dev, int setclear)
-{
-	if (setclear) {
-		MCFGPIO_PASPAR |= 0x0F00;
-		MCFGPIO_PEHLPAR = CFG_PEHLPAR;
-	} else {
-		MCFGPIO_PASPAR &= 0xF0FF;
-		MCFGPIO_PEHLPAR &= ~CFG_PEHLPAR;
-	}
-	return 0;
-}
-
-#if defined(CFG_DISCOVER_PHY) || defined(CONFIG_CMD_MII)
-#include <miiphy.h>
-
-/* Make MII read/write commands for the FEC. */
-#define mk_mii_read(ADDR, REG)	(0x60020000 | ((ADDR << 23) | (REG & 0x1f) << 18))
-
-#define mk_mii_write(ADDR, REG, VAL)	(0x50020000 | ((ADDR << 23) | (REG & 0x1f) << 18) | (VAL & 0xffff))
-
-/* PHY identification */
-#define PHY_ID_LXT970		0x78100000	/* LXT970 */
-#define PHY_ID_LXT971		0x001378e0	/* LXT971 and 972 */
-#define PHY_ID_82555		0x02a80150	/* Intel 82555 */
-#define PHY_ID_QS6612		0x01814400	/* QS6612 */
-#define PHY_ID_AMD79C784	0x00225610	/* AMD 79C784 */
-#define PHY_ID_AMD79C874VC	0x0022561B	/* AMD 79C874 */
-#define PHY_ID_LSI80225		0x0016f870	/* LSI 80225 */
-#define PHY_ID_LSI80225B	0x0016f880	/* LSI 80225/B */
-#define PHY_ID_DP83848VV	0x20005C90	/* National 83848 */
-#define PHY_ID_DP83849		0x20005CA2	/* National 82849 */
-
-#define STR_ID_LXT970		"LXT970"
-#define STR_ID_LXT971		"LXT971"
-#define STR_ID_82555		"Intel82555"
-#define STR_ID_QS6612		"QS6612"
-#define STR_ID_AMD79C784	"AMD79C784"
-#define STR_ID_AMD79C874VC	"AMD79C874VC"
-#define STR_ID_LSI80225		"LSI80225"
-#define STR_ID_LSI80225B	"LSI80225/B"
-#define STR_ID_DP83848VV	"N83848"
-#define STR_ID_DP83849		"N83849"
-
-/****************************************************************************
- * mii_init -- Initialize the MII for MII command without ethernet
- * This function is a subset of eth_init
- ****************************************************************************
- */
-void mii_reset(struct fec_info_s *info)
-{
-	volatile fec_t *fecp = (fec_t *) (info->miibase);
-	int i;
-
-	fecp->ecr = FEC_ECR_RESET;
-	for (i = 0; (fecp->ecr & FEC_ECR_RESET) && (i < FEC_RESET_DELAY); ++i) {
-		udelay(1);
-	}
-	if (i == FEC_RESET_DELAY) {
-		printf("FEC_RESET_DELAY timeout\n");
-	}
-}
-
-/* send command to phy using mii, wait for result */
-uint mii_send(uint mii_cmd)
-{
-	struct fec_info_s *info;
-	struct eth_device *dev;
-	volatile fec_t *ep;
-	uint mii_reply;
-	int j = 0;
-
-	/* retrieve from register structure */
-	dev = eth_get_dev();
-	info = dev->priv;
-
-	ep = (fec_t *) info->miibase;
-
-	ep->mmfr = mii_cmd;	/* command to phy */
-
-	/* wait for mii complete */
-	while (!(ep->eir & FEC_EIR_MII) && (j < MCFFEC_TOUT_LOOP)) {
-		udelay(1);
-		j++;
-	}
-	if (j >= MCFFEC_TOUT_LOOP) {
-		printf("MII not complete\n");
-		return -1;
-	}
-
-	mii_reply = ep->mmfr;	/* result from phy */
-	ep->eir = FEC_EIR_MII;	/* clear MII complete */
-#ifdef ET_DEBUG
-	printf("%s[%d] %s: sent=0x%8.8x, reply=0x%8.8x\n",
-	       __FILE__, __LINE__, __FUNCTION__, mii_cmd, mii_reply);
-#endif
-
-	return (mii_reply & 0xffff);	/* data read from phy */
-}
-#endif				/* CFG_DISCOVER_PHY || CONFIG_CMD_MII */
-
-#if defined(CFG_DISCOVER_PHY)
-int mii_discover_phy(struct eth_device *dev)
-{
-#define MAX_PHY_PASSES 11
-	struct fec_info_s *info = dev->priv;
-	int phyaddr, pass;
-	uint phyno, phytype;
-
-	if (info->phyname_init)
-		return info->phy_addr;
-
-	phyaddr = -1;		/* didn't find a PHY yet */
-	for (pass = 1; pass <= MAX_PHY_PASSES && phyaddr < 0; ++pass) {
-		if (pass > 1) {
-			/* PHY may need more time to recover from reset.
-			 * The LXT970 needs 50ms typical, no maximum is
-			 * specified, so wait 10ms before try again.
-			 * With 11 passes this gives it 100ms to wake up.
-			 */
-			udelay(10000);	/* wait 10ms */
-		}
-
-		for (phyno = 0; phyno < 32 && phyaddr < 0; ++phyno) {
-
-			phytype = mii_send(mk_mii_read(phyno, PHY_PHYIDR1));
-#ifdef ET_DEBUG
-			printf("PHY type 0x%x pass %d type\n", phytype, pass);
-#endif
-			if (phytype != 0xffff) {
-				phyaddr = phyno;
-				phytype <<= 16;
-				phytype |=
-				    mii_send(mk_mii_read(phyno, PHY_PHYIDR2));
-
-				switch (phytype & 0xffffffff) {
-				case PHY_ID_AMD79C874VC:
-					strcpy(info->phy_name,
-					       STR_ID_AMD79C874VC);
-					info->phyname_init = 1;
-					break;
-				default:
-					strcpy(info->phy_name, "unknown");
-					info->phyname_init = 1;
-					break;
-				}
-
-#ifdef ET_DEBUG
-				printf("PHY @ 0x%x pass %d type ", phyno, pass);
-				switch (phytype & 0xffffffff) {
-				case PHY_ID_AMD79C874VC:
-					printf(STR_ID_AMD79C874VC);
-					break;
-				default:
-					printf("0x%08x\n", phytype);
-					break;
-				}
-#endif
-			}
-		}
-	}
-	if (phyaddr < 0)
-		printf("No PHY device found.\n");
-
-	return phyaddr;
-}
-#endif				/* CFG_DISCOVER_PHY */
-
-void mii_init(void) __attribute__((weak,alias("__mii_init")));
-
-void __mii_init(void)
-{
-	volatile fec_t *fecp;
-	struct fec_info_s *info;
-	struct eth_device *dev;
-	int miispd = 0, i = 0;
-	u16 autoneg = 0;
-
-	/* retrieve from register structure */
-	dev = eth_get_dev();
-	info = dev->priv;
-
-	fecp = (fec_t *) info->miibase;
-
-	fecpin_setclear(dev, 1);
-
-	mii_reset(info);
-
-	/* We use strictly polling mode only */
-	fecp->eimr = 0;
-
-	/* Clear any pending interrupt */
-	fecp->eir = 0xffffffff;
-
-	/* Set MII speed */
-	miispd = (gd->bus_clk / 1000000) / 5;
-	fecp->mscr = miispd << 1;
-
-	info->phy_addr = mii_discover_phy(dev);
-
-#define AUTONEGLINK		(PHY_BMSR_AUTN_COMP | PHY_BMSR_LS)
-	while (i < MCFFEC_TOUT_LOOP) {
-		autoneg = 0;
-		miiphy_read(dev->name, info->phy_addr, PHY_BMSR, &autoneg);
-		i++;
-
-		if ((autoneg & AUTONEGLINK) == AUTONEGLINK)
-			break;
-
-		udelay(500);
-	}
-	if (i >= MCFFEC_TOUT_LOOP) {
-		printf("Auto Negotiation not complete\n");
-	}
-
-	/* adapt to the half/full speed settings */
-	info->dup_spd = miiphy_duplex(dev->name, info->phy_addr) << 16;
-	info->dup_spd |= miiphy_speed(dev->name, info->phy_addr);
-}
-
-/*****************************************************************************
- * Read and write a MII PHY register, routines used by MII Utilities
- *
- * FIXME: These routines are expected to return 0 on success, but mii_send
- *	  does _not_ return an error code. Maybe 0xFFFF means error, i.e.
- *	  no PHY connected...
- *	  For now always return 0.
- * FIXME: These routines only work after calling eth_init() at least once!
- *	  Otherwise they hang in mii_send() !!! Sorry!
- *****************************************************************************/
-
-int mcffec_miiphy_read(char *devname, unsigned char addr, unsigned char reg,
-		       unsigned short *value)
-{
-	short rdreg;		/* register working value */
-
-#ifdef MII_DEBUG
-	printf("miiphy_read(0x%x) @ 0x%x = ", reg, addr);
-#endif
-	rdreg = mii_send(mk_mii_read(addr, reg));
-
-	*value = rdreg;
-
-#ifdef MII_DEBUG
-	printf("0x%04x\n", *value);
-#endif
-
-	return 0;
-}
-
-int mcffec_miiphy_write(char *devname, unsigned char addr, unsigned char reg,
-			unsigned short value)
-{
-	short rdreg;		/* register working value */
-
-#ifdef MII_DEBUG
-	printf("miiphy_write(0x%x) @ 0x%x = ", reg, addr);
-#endif
-
-	rdreg = mii_send(mk_mii_write(addr, reg, value));
-
-#ifdef MII_DEBUG
-	printf("0x%04x\n", value);
-#endif
-
-	return 0;
-}
-
-#endif				/* CONFIG_CMD_NET, FEC_ENET & NET_MULTI */
diff --git a/board/BuS/EB+MCF-EV123/u-boot.lds b/board/BuS/EB+MCF-EV123/u-boot.lds
index 4a880e689..b22b332c4 100644
--- a/board/BuS/EB+MCF-EV123/u-boot.lds
+++ b/board/BuS/EB+MCF-EV123/u-boot.lds
@@ -63,7 +63,7 @@ SECTIONS
     lib_generic/zlib.o	(.text)
 
 /*    . = env_offset; */
-    common/environment.o(.text)
+    common/env_embedded.o(.text)
 
     *(.text)
     *(.fixup)
diff --git a/board/LEOX/elpt860/README.LEOX b/board/LEOX/elpt860/README.LEOX
index 9052b097b..25524af69 100644
--- a/board/LEOX/elpt860/README.LEOX
+++ b/board/LEOX/elpt860/README.LEOX
@@ -106,7 +106,7 @@ version - print monitor version
 ?       - alias for 'help'
 
 ##################################################
-# Environment Variables (CFG_ENV_IS_IN_NVRAM)
+# Environment Variables (CONFIG_ENV_IS_IN_NVRAM)
 ##############################
 
 LEOX_elpt860: printenv
diff --git a/board/LEOX/elpt860/elpt860.c b/board/LEOX/elpt860/elpt860.c
index 5f506314c..905df92b1 100644
--- a/board/LEOX/elpt860/elpt860.c
+++ b/board/LEOX/elpt860/elpt860.c
@@ -138,23 +138,23 @@ const uint sdram_table[] = {
 
 /* ------------------------------------------------------------------------- */
 
-#define CFG_PC4    0x0800
+#define CONFIG_SYS_PC4    0x0800
 
-#define CFG_DS1    CFG_PC4
+#define CONFIG_SYS_DS1    CONFIG_SYS_PC4
 
 /*
  * Very early board init code (fpga boot, etc.)
  */
 int board_early_init_f (void)
 {
-	volatile immap_t *immr = (immap_t *) CFG_IMMR;
+	volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
 
 	/*
 	 * Light up the red led on ELPT860 pcb (DS1) (PCDAT)
 	 */
-	immr->im_ioport.iop_pcdat &= ~CFG_DS1;	/* PCDAT (DS1 = 0)                */
-	immr->im_ioport.iop_pcpar &= ~CFG_DS1;	/* PCPAR (0=general purpose I/O)  */
-	immr->im_ioport.iop_pcdir |= CFG_DS1;	/* PCDIR (I/O: 0=input, 1=output) */
+	immr->im_ioport.iop_pcdat &= ~CONFIG_SYS_DS1;	/* PCDAT (DS1 = 0)                */
+	immr->im_ioport.iop_pcpar &= ~CONFIG_SYS_DS1;	/* PCPAR (0=general purpose I/O)  */
+	immr->im_ioport.iop_pcdir |= CONFIG_SYS_DS1;	/* PCDIR (I/O: 0=input, 1=output) */
 
 	return (0);		/* success */
 }
@@ -181,7 +181,7 @@ int checkboard (void)
 
 phys_size_t initdram (int board_type)
 {
-	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
 	volatile memctl8xx_t *memctl = &immap->im_memctl;
 	long int size8, size9;
 	long int size_b0 = 0;
@@ -207,7 +207,7 @@ phys_size_t initdram (int board_type)
 	 * with two SDRAM banks or four cycles every 31.2 us with one
 	 * bank. It will be adjusted after memory sizing.
 	 */
-	memctl->memc_mptpr = CFG_MPTPR_2BK_8K;
+	memctl->memc_mptpr = CONFIG_SYS_MPTPR_2BK_8K;
 
 	/*
 	 * The following value is used as an address (i.e. opcode) for
@@ -229,10 +229,10 @@ phys_size_t initdram (int board_type)
 	 * preliminary addresses - these have to be modified after the
 	 * SDRAM size has been determined.
 	 */
-	memctl->memc_or1 = CFG_OR1_PRELIM;
-	memctl->memc_br1 = CFG_BR1_PRELIM;
+	memctl->memc_or1 = CONFIG_SYS_OR1_PRELIM;
+	memctl->memc_br1 = CONFIG_SYS_BR1_PRELIM;
 
-	memctl->memc_mamr = CFG_MAMR_8COL & (~(MAMR_PTAE));	/* no refresh yet */
+	memctl->memc_mamr = CONFIG_SYS_MAMR_8COL & (~(MAMR_PTAE));	/* no refresh yet */
 
 	udelay (200);
 
@@ -252,7 +252,7 @@ phys_size_t initdram (int board_type)
 	 *
 	 * try 8 column mode
 	 */
-	size8 = dram_size (CFG_MAMR_8COL,
+	size8 = dram_size (CONFIG_SYS_MAMR_8COL,
 			   SDRAM_BASE1_PRELIM, SDRAM_MAX_SIZE);
 
 	udelay (1000);
@@ -260,7 +260,7 @@ phys_size_t initdram (int board_type)
 	/*
 	 * try 9 column mode
 	 */
-	size9 = dram_size (CFG_MAMR_9COL,
+	size9 = dram_size (CONFIG_SYS_MAMR_9COL,
 			   SDRAM_BASE1_PRELIM, SDRAM_MAX_SIZE);
 
 	if (size8 < size9) {	/* leave configuration at 9 columns       */
@@ -269,7 +269,7 @@ phys_size_t initdram (int board_type)
 	} else {		/* back to 8 columns                      */
 
 		size_b0 = size8;
-		memctl->memc_mamr = CFG_MAMR_8COL;
+		memctl->memc_mamr = CONFIG_SYS_MAMR_8COL;
 		udelay (500);
 		/* debug ("SDRAM Bank 0 in 8 column mode: %ld MB\n", size >> 20); */
 	}
@@ -282,22 +282,22 @@ phys_size_t initdram (int board_type)
 	 */
 	if (size_b0 < 0x02000000) {
 		/* reduce to 15.6 us (62.4 us / quad) */
-		memctl->memc_mptpr = CFG_MPTPR_2BK_4K;
+		memctl->memc_mptpr = CONFIG_SYS_MPTPR_2BK_4K;
 		udelay (1000);
 	}
 
 	/*
 	 * Final mapping: map bigger bank first
 	 */
-	memctl->memc_or1 = ((-size_b0) & 0xFFFF0000) | CFG_OR_TIMING_SDRAM;
-	memctl->memc_br1 = (CFG_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V;
+	memctl->memc_or1 = ((-size_b0) & 0xFFFF0000) | CONFIG_SYS_OR_TIMING_SDRAM;
+	memctl->memc_br1 = (CONFIG_SYS_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V;
 
 	{
 		unsigned long reg;
 
 		/* adjust refresh rate depending on SDRAM type, one bank */
 		reg = memctl->memc_mptpr;
-		reg >>= 1;	/* reduce to CFG_MPTPR_1BK_8K / _4K */
+		reg >>= 1;	/* reduce to CONFIG_SYS_MPTPR_1BK_8K / _4K */
 		memctl->memc_mptpr = reg;
 	}
 
@@ -319,7 +319,7 @@ phys_size_t initdram (int board_type)
 static long int
 dram_size (long int mamr_value, long int *base, long int maxsize)
 {
-	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
 	volatile memctl8xx_t *memctl = &immap->im_memctl;
 
 	memctl->memc_mamr = mamr_value;
@@ -329,20 +329,20 @@ dram_size (long int mamr_value, long int *base, long int maxsize)
 
 /* ------------------------------------------------------------------------- */
 
-#define CFG_PA1     0x4000
-#define CFG_PA2     0x2000
+#define CONFIG_SYS_PA1     0x4000
+#define CONFIG_SYS_PA2     0x2000
 
-#define CFG_LBKs    (CFG_PA2 | CFG_PA1)
+#define CONFIG_SYS_LBKs    (CONFIG_SYS_PA2 | CONFIG_SYS_PA1)
 
 void reset_phy (void)
 {
-	volatile immap_t *immr = (immap_t *) CFG_IMMR;
+	volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
 
 	/*
 	 * Ensure LBK LXT901 ethernet 1 & 2 = 0 ... for normal loopback in effect
 	 *                                          and no AUI loopback
 	 */
-	immr->im_ioport.iop_padat &= ~CFG_LBKs;	/* PADAT (LBK eth 1&2 = 0)        */
-	immr->im_ioport.iop_papar &= ~CFG_LBKs;	/* PAPAR (0=general purpose I/O)  */
-	immr->im_ioport.iop_padir |= CFG_LBKs;	/* PADIR (I/O: 0=input, 1=output) */
+	immr->im_ioport.iop_padat &= ~CONFIG_SYS_LBKs;	/* PADAT (LBK eth 1&2 = 0)        */
+	immr->im_ioport.iop_papar &= ~CONFIG_SYS_LBKs;	/* PAPAR (0=general purpose I/O)  */
+	immr->im_ioport.iop_padir |= CONFIG_SYS_LBKs;	/* PADIR (I/O: 0=input, 1=output) */
 }
diff --git a/board/LEOX/elpt860/flash.c b/board/LEOX/elpt860/flash.c
index c1b3b8513..9a75aad18 100644
--- a/board/LEOX/elpt860/flash.c
+++ b/board/LEOX/elpt860/flash.c
@@ -33,7 +33,7 @@
 /*
 ** Note 1: In this file, you have to provide the following variable:
 ** ------
-**              flash_info_t    flash_info[CFG_MAX_FLASH_BANKS]
+**              flash_info_t    flash_info[CONFIG_SYS_MAX_FLASH_BANKS]
 ** 'flash_info_t' structure is defined into 'include/flash.h'
 ** and defined as extern into 'common/cmd_flash.c'
 **
@@ -61,11 +61,11 @@
 #include <mpc8xx.h>
 
 
-#ifndef	CFG_ENV_ADDR
-#  define CFG_ENV_ADDR	(CFG_FLASH_BASE + CFG_ENV_OFFSET)
+#ifndef	CONFIG_ENV_ADDR
+#  define CONFIG_ENV_ADDR	(CONFIG_SYS_FLASH_BASE + CONFIG_ENV_OFFSET)
 #endif
 
-flash_info_t	flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
+flash_info_t	flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */
 
 /*-----------------------------------------------------------------------
  * Internal Functions
@@ -82,13 +82,13 @@ static int write_byte (flash_info_t *info, ulong dest, uchar data);
 unsigned long
 flash_init (void)
 {
-  volatile immap_t     *immap  = (immap_t *)CFG_IMMR;
+  volatile immap_t     *immap  = (immap_t *)CONFIG_SYS_IMMR;
   volatile memctl8xx_t *memctl = &immap->im_memctl;
   unsigned long         size_b0;
   int i;
 
   /* Init: no FLASHes known */
-  for (i=0; i<CFG_MAX_FLASH_BANKS; ++i)
+  for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i)
     {
       flash_info[i].flash_id = FLASH_UNKNOWN;
     }
@@ -105,28 +105,28 @@ flash_init (void)
     }
 
   /* Remap FLASH according to real size */
-  memctl->memc_or0 = CFG_OR_TIMING_FLASH | (-size_b0 & OR_AM_MSK);
-  memctl->memc_br0 = (CFG_FLASH_BASE & BR_BA_MSK) | BR_MS_GPCM | BR_PS_8 | BR_V;
+  memctl->memc_or0 = CONFIG_SYS_OR_TIMING_FLASH | (-size_b0 & OR_AM_MSK);
+  memctl->memc_br0 = (CONFIG_SYS_FLASH_BASE & BR_BA_MSK) | BR_MS_GPCM | BR_PS_8 | BR_V;
 
   /* Re-do sizing to get full correct info */
-  size_b0 = flash_get_size ((volatile unsigned char *)CFG_FLASH_BASE,
+  size_b0 = flash_get_size ((volatile unsigned char *)CONFIG_SYS_FLASH_BASE,
 			    &flash_info[0]);
 
-  flash_get_offsets (CFG_FLASH_BASE, &flash_info[0]);
+  flash_get_offsets (CONFIG_SYS_FLASH_BASE, &flash_info[0]);
 
-#if CFG_MONITOR_BASE >= CFG_FLASH_BASE
+#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE
   /* monitor protection ON by default */
   flash_protect (FLAG_PROTECT_SET,
-		 CFG_MONITOR_BASE,
-		 CFG_MONITOR_BASE + monitor_flash_len-1,
+		 CONFIG_SYS_MONITOR_BASE,
+		 CONFIG_SYS_MONITOR_BASE + monitor_flash_len-1,
 		 &flash_info[0]);
 #endif
 
-#ifdef	CFG_ENV_IS_IN_FLASH
+#ifdef	CONFIG_ENV_IS_IN_FLASH
   /* ENV protection ON by default */
   flash_protect(FLAG_PROTECT_SET,
-		CFG_ENV_ADDR,
-		CFG_ENV_ADDR + CFG_ENV_SIZE-1,
+		CONFIG_ENV_ADDR,
+		CONFIG_ENV_ADDR + CONFIG_ENV_SIZE-1,
 		&flash_info[0]);
 #endif
 
@@ -383,7 +383,7 @@ flash_erase (flash_info_t  *info,
   addr = (volatile unsigned char *)(info->start[l_sect]);
   while ( (addr[0] & 0x80) != 0x80 )
     {
-      if ( (now = get_timer(start)) > CFG_FLASH_ERASE_TOUT )
+      if ( (now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT )
 	{
 	  printf ("Timeout\n");
 	  return ( 1 );
@@ -556,7 +556,7 @@ write_word (flash_info_t  *info,
   start = get_timer (0);
   while ( (*((vu_long *)dest) & 0x00800080) != (data & 0x00800080) )
     {
-      if ( get_timer(start) > CFG_FLASH_WRITE_TOUT )
+      if ( get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT )
 	{
 	  return (1);
 	}
@@ -602,7 +602,7 @@ write_byte (flash_info_t  *info,
   start = get_timer (0);
   while ( (*((volatile unsigned char *)dest) & 0x80) != (data & 0x80) )
     {
-      if ( get_timer(start) > CFG_FLASH_WRITE_TOUT )
+      if ( get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT )
 	{
 	  return (1);
 	}
diff --git a/board/LEOX/elpt860/u-boot.lds b/board/LEOX/elpt860/u-boot.lds
index 7b1440b36..9b9b980f4 100644
--- a/board/LEOX/elpt860/u-boot.lds
+++ b/board/LEOX/elpt860/u-boot.lds
@@ -77,7 +77,7 @@ SECTIONS
     lib_ppc/ticks.o			(.text)
 
     . = env_offset;
-    common/environment.o		(.text)
+    common/env_embedded.o		(.text)
 
     *(.text)
     *(.fixup)
@@ -147,6 +147,7 @@ SECTIONS
    *(.dynbss)
    *(.bss)
    *(COMMON)
+   . = ALIGN(4);
   }
   _end = . ;
   PROVIDE (end = .);
diff --git a/board/LEOX/elpt860/u-boot.lds.debug b/board/LEOX/elpt860/u-boot.lds.debug
index 357867054..434c9b71d 100644
--- a/board/LEOX/elpt860/u-boot.lds.debug
+++ b/board/LEOX/elpt860/u-boot.lds.debug
@@ -70,7 +70,7 @@ SECTIONS
     lib_generic/crc32.o		(.text)
 
     . = env_offset;
-    common/environment.o	(.text)
+    common/env_embedded.o	(.text)
 
     *(.text)
     *(.fixup)
diff --git a/board/MAI/AmigaOneG3SE/AmigaOneG3SE.c b/board/MAI/AmigaOneG3SE/AmigaOneG3SE.c
index e118563fc..4d44001ff 100644
--- a/board/MAI/AmigaOneG3SE/AmigaOneG3SE.c
+++ b/board/MAI/AmigaOneG3SE/AmigaOneG3SE.c
@@ -26,6 +26,7 @@
 #include <common.h>
 #include <command.h>
 #include <pci.h>
+#include <netdev.h>
 #include "articiaS.h"
 #include "memio.h"
 #include "via686.h"
@@ -111,3 +112,11 @@ void pci_init_board (void)
 	articiaS_pci_init ();
 #endif
 }
+
+int board_eth_init(bd_t *bis)
+{
+#if defined(CONFIG_3COM)
+	eth_3com_initialize(bis);
+#endif
+	return 0;
+}
diff --git a/board/MAI/AmigaOneG3SE/cmd_boota.c b/board/MAI/AmigaOneG3SE/cmd_boota.c
index 40c951d06..949af1802 100644
--- a/board/MAI/AmigaOneG3SE/cmd_boota.c
+++ b/board/MAI/AmigaOneG3SE/cmd_boota.c
@@ -27,7 +27,7 @@ struct bootcode_block bblk;
 
 int do_boota (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
 {
-	unsigned char *load_address = (unsigned char *) CFG_LOAD_ADDR;
+	unsigned char *load_address = (unsigned char *) CONFIG_SYS_LOAD_ADDR;
 	unsigned char *base_address;
 	unsigned long offset;
 
diff --git a/board/MAI/AmigaOneG3SE/enet.c b/board/MAI/AmigaOneG3SE/enet.c
index 5a90cc57d..0b4dfe6aa 100644
--- a/board/MAI/AmigaOneG3SE/enet.c
+++ b/board/MAI/AmigaOneG3SE/enet.c
@@ -28,6 +28,7 @@
 #include <common.h>
 #include <malloc.h>
 #include <net.h>
+#include <netdev.h>
 #include <asm/io.h>
 #include <pci.h>
 
diff --git a/board/MAI/AmigaOneG3SE/flash.c b/board/MAI/AmigaOneG3SE/flash.c
index 409b955fd..a96d5bae2 100644
--- a/board/MAI/AmigaOneG3SE/flash.c
+++ b/board/MAI/AmigaOneG3SE/flash.c
@@ -1,14 +1,14 @@
 #include <common.h>
 #include <flash.h>
 
-flash_info_t    flash_info[CFG_MAX_FLASH_BANKS];
+flash_info_t    flash_info[CONFIG_SYS_MAX_FLASH_BANKS];
 
 
 unsigned long flash_init(void)
 {
     int i;
 
-    for (i = 0; i < CFG_MAX_FLASH_BANKS; i++)
+    for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++)
     {
 	flash_info[i].flash_id = FLASH_UNKNOWN;
 	flash_info[i].sector_count = 0;
diff --git a/board/MAI/AmigaOneG3SE/flash_new.c b/board/MAI/AmigaOneG3SE/flash_new.c
index d46bf4646..7b7ea1697 100644
--- a/board/MAI/AmigaOneG3SE/flash_new.c
+++ b/board/MAI/AmigaOneG3SE/flash_new.c
@@ -39,7 +39,7 @@
 #endif
 /*---------------------------------------------------------------------*/
 
-flash_info_t	flash_info[CFG_MAX_FLASH_BANKS];
+flash_info_t	flash_info[CONFIG_SYS_MAX_FLASH_BANKS];
 
 static ulong flash_get_size (ulong addr, flash_info_t *info);
 static int flash_get_offsets (ulong base, flash_info_t *info);
@@ -80,7 +80,7 @@ unsigned long flash_init_old(void)
 {
     int i;
 
-    for (i = 0; i < CFG_MAX_FLASH_BANKS; i++)
+    for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++)
     {
 	flash_info[i].flash_id = FLASH_UNKNOWN;
 	flash_info[i].sector_count = 0;
@@ -101,33 +101,33 @@ unsigned long flash_init (void)
 	flash_to_xd();
 
 	/* Init: no FLASHes known */
-	for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) {
+	for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
 		flash_info[i].flash_id = FLASH_UNKNOWN;
 		flash_info[i].sector_count = 0;
 		flash_info[i].size = 0;
 	}
 
-	DEBUGF("\n## Get flash size @ 0x%08x\n", CFG_FLASH_BASE);
+	DEBUGF("\n## Get flash size @ 0x%08x\n", CONFIG_SYS_FLASH_BASE);
 
-	flash_size = flash_get_size (CFG_FLASH_BASE, flash_info);
+	flash_size = flash_get_size (CONFIG_SYS_FLASH_BASE, flash_info);
 
 	DEBUGF("## Flash bank size: %08lx\n", flash_size);
 
 	if (flash_size) {
-#if CFG_MONITOR_BASE >= CFG_FLASH_BASE && \
-    CFG_MONITOR_BASE < CFG_FLASH_BASE + CFG_FLASH_MAX_SIZE
+#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE && \
+    CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE + CONFIG_SYS_FLASH_MAX_SIZE
 		/* monitor protection ON by default */
 		flash_protect(FLAG_PROTECT_SET,
-			      CFG_MONITOR_BASE,
-			      CFG_MONITOR_BASE + monitor_flash_len - 1,
+			      CONFIG_SYS_MONITOR_BASE,
+			      CONFIG_SYS_MONITOR_BASE + monitor_flash_len - 1,
 			      &flash_info[0]);
 #endif
 
-#ifdef CFG_ENV_IS_IN_FLASH
+#ifdef CONFIG_ENV_IS_IN_FLASH
 		/* ENV protection ON by default */
 		flash_protect(FLAG_PROTECT_SET,
-			      CFG_ENV_ADDR,
-			      CFG_ENV_ADDR + CFG_ENV_SECT_SIZE - 1,
+			      CONFIG_ENV_ADDR,
+			      CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE - 1,
 			      &flash_info[0]);
 #endif
 
@@ -286,10 +286,10 @@ static ulong flash_get_size (ulong addr, flash_info_t *info)
 
 	}
 
-	if (info->sector_count > CFG_MAX_FLASH_SECT) {
+	if (info->sector_count > CONFIG_SYS_MAX_FLASH_SECT) {
 		printf ("** ERROR: sector count %d > max (%d) **\n",
-			info->sector_count, CFG_MAX_FLASH_SECT);
-		info->sector_count = CFG_MAX_FLASH_SECT;
+			info->sector_count, CONFIG_SYS_MAX_FLASH_SECT);
+		info->sector_count = CONFIG_SYS_MAX_FLASH_SECT;
 	}
 
 	if (! flash_get_offsets (addr, info)) {
@@ -418,10 +418,10 @@ int flash_erase (flash_info_t *info, int s_first, int s_last)
 	last  = start;
 	addr = info->start[l_sect];
 
-	DEBUGF ("Start erase timeout: %d\n", CFG_FLASH_ERASE_TOUT);
+	DEBUGF ("Start erase timeout: %d\n", CONFIG_SYS_FLASH_ERASE_TOUT);
 
 	while ((in8(addr) & 0x80) != 0x80) {
-		if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+		if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
 			printf ("Timeout\n");
 			flash_reset (info->start[0]);
 			flash_to_mem();
@@ -562,7 +562,7 @@ static int write_word (flash_info_t *info, ulong dest, ulong data)
 		/* data polling for D7 */
 		start = get_timer (0);
 		while ((in8(dest+i) & 0x80) != (data_ch[i] & 0x80)) {
-			if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+			if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
 				flash_reset (addr);
 				flash_to_mem();
 				return (1);
diff --git a/board/MAI/AmigaOneG3SE/i8259.h b/board/MAI/AmigaOneG3SE/i8259.h
index 05c40522d..eb08e13d4 100644
--- a/board/MAI/AmigaOneG3SE/i8259.h
+++ b/board/MAI/AmigaOneG3SE/i8259.h
@@ -21,20 +21,20 @@
  * MA 02111-1307 USA
  */
 
-#define ICW1_1  CFG_ISA_IO_BASE_ADDRESS + ISA_INT1_ICW1
-#define ICW1_2  CFG_ISA_IO_BASE_ADDRESS + ISA_INT2_ICW1
-#define ICW2_1  CFG_ISA_IO_BASE_ADDRESS + ISA_INT1_ICW2
-#define ICW2_2  CFG_ISA_IO_BASE_ADDRESS + ISA_INT2_ICW2
-#define ICW3_1  CFG_ISA_IO_BASE_ADDRESS + ISA_INT1_ICW3
-#define ICW3_2  CFG_ISA_IO_BASE_ADDRESS + ISA_INT2_ICW3
-#define ICW4_1  CFG_ISA_IO_BASE_ADDRESS + ISA_INT1_ICW4
-#define ICW4_2  CFG_ISA_IO_BASE_ADDRESS + ISA_INT2_ICW4
-#define OCW1_1  CFG_ISA_IO_BASE_ADDRESS + ISA_INT1_OCW1
-#define OCW1_2  CFG_ISA_IO_BASE_ADDRESS + ISA_INT2_OCW1
-#define OCW2_1  CFG_ISA_IO_BASE_ADDRESS + ISA_INT1_OCW2
-#define OCW2_2  CFG_ISA_IO_BASE_ADDRESS + ISA_INT2_OCW2
-#define OCW3_1  CFG_ISA_IO_BASE_ADDRESS + ISA_INT1_OCW3
-#define OCW3_2  CFG_ISA_IO_BASE_ADDRESS + ISA_INT2_OCW3
+#define ICW1_1  CONFIG_SYS_ISA_IO_BASE_ADDRESS + ISA_INT1_ICW1
+#define ICW1_2  CONFIG_SYS_ISA_IO_BASE_ADDRESS + ISA_INT2_ICW1
+#define ICW2_1  CONFIG_SYS_ISA_IO_BASE_ADDRESS + ISA_INT1_ICW2
+#define ICW2_2  CONFIG_SYS_ISA_IO_BASE_ADDRESS + ISA_INT2_ICW2
+#define ICW3_1  CONFIG_SYS_ISA_IO_BASE_ADDRESS + ISA_INT1_ICW3
+#define ICW3_2  CONFIG_SYS_ISA_IO_BASE_ADDRESS + ISA_INT2_ICW3
+#define ICW4_1  CONFIG_SYS_ISA_IO_BASE_ADDRESS + ISA_INT1_ICW4
+#define ICW4_2  CONFIG_SYS_ISA_IO_BASE_ADDRESS + ISA_INT2_ICW4
+#define OCW1_1  CONFIG_SYS_ISA_IO_BASE_ADDRESS + ISA_INT1_OCW1
+#define OCW1_2  CONFIG_SYS_ISA_IO_BASE_ADDRESS + ISA_INT2_OCW1
+#define OCW2_1  CONFIG_SYS_ISA_IO_BASE_ADDRESS + ISA_INT1_OCW2
+#define OCW2_2  CONFIG_SYS_ISA_IO_BASE_ADDRESS + ISA_INT2_OCW2
+#define OCW3_1  CONFIG_SYS_ISA_IO_BASE_ADDRESS + ISA_INT1_OCW3
+#define OCW3_2  CONFIG_SYS_ISA_IO_BASE_ADDRESS + ISA_INT2_OCW3
 
 #define IMR_1   OCW1_1
 #define IMR_2   OCW1_2
diff --git a/board/MAI/AmigaOneG3SE/interrupts.c b/board/MAI/AmigaOneG3SE/interrupts.c
index 86b44150d..de46d6e37 100644
--- a/board/MAI/AmigaOneG3SE/interrupts.c
+++ b/board/MAI/AmigaOneG3SE/interrupts.c
@@ -119,12 +119,12 @@ int interrupt_init (void)
 #ifdef DEBUG
 	puts("interrupt_init: setting decrementer_count\n");
 #endif
-	decrementer_count = get_tbclk() / CFG_HZ;
+	decrementer_count = get_tbclk() / CONFIG_SYS_HZ;
 
 #ifdef DEBUG
 	puts("interrupt_init: setting actual decremter\n");
 #endif
-	set_dec (get_tbclk() / CFG_HZ);
+	set_dec (get_tbclk() / CONFIG_SYS_HZ);
 
 #ifdef DEBUG
 	puts("interrupt_init: clearing external interrupt table\n");
diff --git a/board/MAI/AmigaOneG3SE/ps2kbd.c b/board/MAI/AmigaOneG3SE/ps2kbd.c
index 724a44db7..a297005ed 100644
--- a/board/MAI/AmigaOneG3SE/ps2kbd.c
+++ b/board/MAI/AmigaOneG3SE/ps2kbd.c
@@ -214,7 +214,7 @@ int isa_kbd_init (void)
 	}
 }
 
-#ifdef CFG_CONSOLE_OVERWRITE_ROUTINE
+#ifdef CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
 extern int overwrite_console (void);
 #else
 int overwrite_console (void)
@@ -492,22 +492,22 @@ unsigned char handle_kbd_event (void)
  */
 unsigned char kbd_read_status(void)
 {
-	return(in8(CFG_ISA_IO_BASE_ADDRESS + KDB_COMMAND_PORT));
+	return(in8(CONFIG_SYS_ISA_IO_BASE_ADDRESS + KDB_COMMAND_PORT));
 }
 
 unsigned char kbd_read_input(void)
 {
-	return(in8(CFG_ISA_IO_BASE_ADDRESS + KDB_DATA_PORT));
+	return(in8(CONFIG_SYS_ISA_IO_BASE_ADDRESS + KDB_DATA_PORT));
 }
 
 void kbd_write_command(unsigned char cmd)
 {
-	out8(CFG_ISA_IO_BASE_ADDRESS + KDB_COMMAND_PORT,cmd);
+	out8(CONFIG_SYS_ISA_IO_BASE_ADDRESS + KDB_COMMAND_PORT,cmd);
 }
 
 void kbd_write_output(unsigned char data)
 {
-	out8(CFG_ISA_IO_BASE_ADDRESS + KDB_DATA_PORT, data);
+	out8(CONFIG_SYS_ISA_IO_BASE_ADDRESS + KDB_DATA_PORT, data);
 }
 
 int kbd_read_data(void)
diff --git a/board/MAI/AmigaOneG3SE/serial.c b/board/MAI/AmigaOneG3SE/serial.c
index b6f57c724..88039f3d0 100644
--- a/board/MAI/AmigaOneG3SE/serial.c
+++ b/board/MAI/AmigaOneG3SE/serial.c
@@ -6,7 +6,7 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
-#ifndef CFG_NS16550
+#ifndef CONFIG_SYS_NS16550
 static uint32 ComPort1;
 
 uint16 SerialEcho = 1;
@@ -147,8 +147,8 @@ void serial_debug_putc (int c)
 
 #else
 
-const NS16550_t Com0 = (NS16550_t) CFG_NS16550_COM1;
-const NS16550_t Com1 = (NS16550_t) CFG_NS16550_COM2;
+const NS16550_t Com0 = (NS16550_t) CONFIG_SYS_NS16550_COM1;
+const NS16550_t Com1 = (NS16550_t) CONFIG_SYS_NS16550_COM2;
 
 int serial_init (void)
 {
diff --git a/board/MAI/AmigaOneG3SE/u-boot.lds b/board/MAI/AmigaOneG3SE/u-boot.lds
index 7386ea7a2..e107b479c 100644
--- a/board/MAI/AmigaOneG3SE/u-boot.lds
+++ b/board/MAI/AmigaOneG3SE/u-boot.lds
@@ -62,7 +62,7 @@ SECTIONS
     cpu/74xx_7xx/start.o	(.text)
 /* store the environment in a seperate sector in the boot flash */
 /*    . = env_offset; */
-    common/environment.o(.text)
+    common/env_embedded.o(.text)
 
     *(.text)
     *(.fixup)
diff --git a/board/MAI/AmigaOneG3SE/usb_uhci.c b/board/MAI/AmigaOneG3SE/usb_uhci.c
index 26cdcdf76..857ab3edc 100644
--- a/board/MAI/AmigaOneG3SE/usb_uhci.c
+++ b/board/MAI/AmigaOneG3SE/usb_uhci.c
@@ -627,7 +627,7 @@ int usb_lowlevel_init(void)
 	pci_read_config_dword(busdevfunc,PCI_BASE_ADDRESS_4,&usb_base_addr);
 	USB_UHCI_PRINTF("IO Base Address = 0x%lx\n",usb_base_addr);
 	usb_base_addr&=0xFFFFFFF0;
-	usb_base_addr+=CFG_ISA_IO_BASE_ADDRESS;
+	usb_base_addr+=CONFIG_SYS_ISA_IO_BASE_ADDRESS;
 	rh.devnum = 0;
 	usb_init_skel();
 	reset_hc();
@@ -801,7 +801,7 @@ int uhci_submit_rh_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
 	unsigned short wIndex;
 	unsigned short wLength;
 
-	if ((pipe & PIPE_INTERRUPT) == PIPE_INTERRUPT) {
+	if (usb_pipeint(pipe)) {
 		printf("Root-Hub submit IRQ: NOT implemented\n");
 #if 0
 		uhci->rh.urb = urb;
diff --git a/board/Marvell/common/bootseq.txt b/board/Marvell/common/bootseq.txt
index 290aed90a..e4fefb31d 100644
--- a/board/Marvell/common/bootseq.txt
+++ b/board/Marvell/common/bootseq.txt
@@ -88,7 +88,7 @@ in_flash:
 		    nothing
 		mem_malloc_init
 		malloc_bin_reloc
-		spi_init (r or f)??? (CFG_ENV_IS_IN_EEPROM)
+		spi_init (r or f)??? (CONFIG_ENV_IS_IN_EEPROM)
 		env_relocated
 		misc_init_r(bd): (board/evb64260/evb64260.c)
 		    mpsc_init2
diff --git a/board/Marvell/common/flash.c b/board/Marvell/common/flash.c
index 3603372d0..21eae0e94 100644
--- a/board/Marvell/common/flash.c
+++ b/board/Marvell/common/flash.c
@@ -48,7 +48,7 @@
 int flash_erase_intel (flash_info_t * info, int s_first, int s_last);
 int write_word_intel (bank_addr_t addr, bank_word_t value);
 
-flash_info_t flash_info[CFG_MAX_FLASH_BANKS];	/* info for FLASH chips */
+flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];	/* info for FLASH chips */
 
 /*-----------------------------------------------------------------------
  * Functions
@@ -68,14 +68,14 @@ unsigned long flash_init (void)
 	unsigned long base, flash_size;
 
 	/* Init: no FLASHes known */
-	for (i = 0; i < CFG_MAX_FLASH_BANKS; ++i) {
+	for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
 		flash_info[i].flash_id = FLASH_UNKNOWN;
 	}
 
 	/* the boot flash */
-	base = CFG_FLASH_BASE;
+	base = CONFIG_SYS_FLASH_BASE;
 	size_b0 =
-		flash_get_size (CFG_BOOT_FLASH_WIDTH, (vu_long *) base,
+		flash_get_size (CONFIG_SYS_BOOT_FLASH_WIDTH, (vu_long *) base,
 				&flash_info[0]);
 
 	printf ("[%ldkB@%lx] ", size_b0 / 1024, base);
@@ -84,11 +84,11 @@ unsigned long flash_init (void)
 		printf ("## Unknown FLASH at %08lx: Size = 0x%08lx = %ld MB\n", base, size_b0, size_b0 << 20);
 	}
 
-	base = memoryGetDeviceBaseAddress (CFG_EXTRA_FLASH_DEVICE);
+	base = memoryGetDeviceBaseAddress (CONFIG_SYS_EXTRA_FLASH_DEVICE);
 /*	base = memoryGetDeviceBaseAddress(DEV_CS3_BASE_ADDR);*/
-	for (i = 1; i < CFG_MAX_FLASH_BANKS; i++) {
+	for (i = 1; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) {
 		unsigned long size =
-			flash_get_size (CFG_EXTRA_FLASH_WIDTH,
+			flash_get_size (CONFIG_SYS_EXTRA_FLASH_WIDTH,
 					(vu_long *) base, &flash_info[i]);
 
 		printf ("[%ldMB@%lx] ", size >> 20, base);
@@ -617,7 +617,7 @@ int flash_erase (flash_info_t * info, int s_first, int s_last)
 							/* has the timeout limit been reached? */
 							if (get_timer (start)
 							    >
-							    CFG_FLASH_ERASE_TOUT)
+							    CONFIG_SYS_FLASH_ERASE_TOUT)
 							{
 								/* timeout limit reached */
 								printf ("Time out limit reached erasing sector at address %08lx\n", info->start[sect]);
@@ -776,7 +776,7 @@ int flash_erase (flash_info_t * info, int s_first, int s_last)
 	addr = (volatile unsigned char *) (info->start[l_sect]);
 	/* broken for 2x16: TODO */
 	while ((addr[0] & 0x80) != 0x80) {
-		if ((now = get_timer (start)) > CFG_FLASH_ERASE_TOUT) {
+		if ((now = get_timer (start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
 			printf ("Timeout\n");
 			return 1;
 		}
@@ -956,7 +956,7 @@ static int write_word (flash_info_t * info, ulong dest, ulong data)
 				{
 					/* has the timeout limit been reached? */
 					if (get_timer (start) >
-					    CFG_FLASH_WRITE_TOUT) {
+					    CONFIG_SYS_FLASH_WRITE_TOUT) {
 						/* timeout limit reached */
 						printf ("Time out limit reached programming address %08lx with data %08lx\n", dest, data);
 						/* reset the flash */
@@ -1064,7 +1064,7 @@ static int write_word (flash_info_t * info, ulong dest, ulong data)
 	/* data polling for D7 */
 	start = get_timer (0);
 	while ((*((vu_long *) dest) & 0x00800080) != (data & 0x00800080)) {
-		if (get_timer (start) > CFG_FLASH_WRITE_TOUT) {
+		if (get_timer (start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
 			return (1);
 		}
 	}
diff --git a/board/Marvell/common/i2c.c b/board/Marvell/common/i2c.c
index 32b2b30a4..d42604439 100644
--- a/board/Marvell/common/i2c.c
+++ b/board/Marvell/common/i2c.c
@@ -48,7 +48,7 @@ static void i2c_init (int speed, int slaveaddr)
 	unsigned int actualN = 0, actualM = 0;
 	unsigned int control, status;
 	unsigned int minMargin = 0xffffffff;
-	unsigned int tclk = CFG_TCLK;
+	unsigned int tclk = CONFIG_SYS_TCLK;
 	unsigned int i2cFreq = speed;	/* 100000 max. Fast mode not supported */
 
 	DP (puts ("i2c_init\n"));
@@ -372,7 +372,7 @@ i2c_read (uchar dev_addr, unsigned int offset, int alen, uchar * data,
 	  int len)
 {
 	uchar status = 0;
-	unsigned int i2cFreq = CFG_I2C_SPEED;
+	unsigned int i2cFreq = CONFIG_SYS_I2C_SPEED;
 
 	DP (puts ("i2c_read\n"));
 
@@ -447,7 +447,7 @@ i2c_write (uchar dev_addr, unsigned int offset, int alen, uchar * data,
 	   int len)
 {
 	uchar status = 0;
-	unsigned int i2cFreq = CFG_I2C_SPEED;
+	unsigned int i2cFreq = CONFIG_SYS_I2C_SPEED;
 
 	DP (puts ("i2c_write\n"));
 
@@ -500,7 +500,7 @@ int i2c_probe (uchar chip)
 	unsigned int i2c_status;
 #endif
 	uchar status = 0;
-	unsigned int i2cFreq = CFG_I2C_SPEED;
+	unsigned int i2cFreq = CONFIG_SYS_I2C_SPEED;
 
 	DP (puts ("i2c_probe\n"));
 
diff --git a/board/Marvell/common/intel_flash.c b/board/Marvell/common/intel_flash.c
index d26f883ad..42b3ee154 100644
--- a/board/Marvell/common/intel_flash.c
+++ b/board/Marvell/common/intel_flash.c
@@ -152,7 +152,7 @@ int write_word_intel (bank_addr_t addr, bank_word_t value)
 	/* data polling for D7 */
 	start = get_timer (0);
 	do {
-		if (get_timer (start) > CFG_FLASH_WRITE_TOUT) {
+		if (get_timer (start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
 			retval = 1;
 			goto done;
 		}
@@ -227,7 +227,7 @@ int flash_erase_intel (flash_info_t * info, int s_first, int s_last)
 			do {
 				now = get_timer (start);
 
-				if (now - estart > CFG_FLASH_ERASE_TOUT) {
+				if (now - estart > CONFIG_SYS_FLASH_ERASE_TOUT) {
 					printf ("Timeout (sect %d)\n", sect);
 					haderr = 1;
 					break;
diff --git a/board/Marvell/common/intel_flash.h b/board/Marvell/common/intel_flash.h
index 666a4cdca..bd8941ea5 100644
--- a/board/Marvell/common/intel_flash.h
+++ b/board/Marvell/common/intel_flash.h
@@ -68,7 +68,7 @@
 /* ID and Lock Configuration */
 #define CHIP_RD_ID_LOCK		0x01		/* Bit 0 of each byte */
 #define CHIP_RD_ID_MAN		0x89		/* Manufacturer code = 0x89 */
-#define CHIP_RD_ID_DEV		CFG_FLASH_ID
+#define CHIP_RD_ID_DEV		CONFIG_SYS_FLASH_ID
 
 /* dimensions */
 #define CHIP_WIDTH		2		/* chips are in 16 bit mode */
diff --git a/board/Marvell/common/misc.S b/board/Marvell/common/misc.S
index 41c3a9508..b3a089803 100644
--- a/board/Marvell/common/misc.S
+++ b/board/Marvell/common/misc.S
@@ -16,7 +16,7 @@
 board_relocate_rom:
 	mflr	r7
 	/* update the location of the GT registers */
-	lis	r11, CFG_GT_REGS@h
+	lis	r11, CONFIG_SYS_GT_REGS@h
 	/* if we're using ECC, we must use the DMA engine to copy ourselves */
 	bl	start_idma_transfer_0
 	bl	wait_for_idma_0
@@ -29,12 +29,12 @@ board_relocate_rom:
 board_init_ecc:
 	mflr	r7
 	/* NOTE: r10 still contains the location we've been relocated to
-	 * which happens to be TOP_OF_RAM - CFG_MONITOR_LEN */
+	 * which happens to be TOP_OF_RAM - CONFIG_SYS_MONITOR_LEN */
 
 	/* now that we're running from ram, init the rest of main memory
 	 * for ECC use */
-	lis	r8, CFG_MONITOR_LEN@h
-	ori	r8, r8, CFG_MONITOR_LEN@l
+	lis	r8, CONFIG_SYS_MONITOR_LEN@h
+	ori	r8, r8, CONFIG_SYS_MONITOR_LEN@l
 
 	divw	r3, r10, r8
 
@@ -120,15 +120,15 @@ stop_idma_engine_0:
 	blr
 #endif
 
-#ifdef CFG_BOARD_ASM_INIT
+#ifdef CONFIG_SYS_BOARD_ASM_INIT
 	/* NOTE: trashes r3-r7 */
 	.globl board_asm_init
 board_asm_init:
 	/* just move the GT registers to where they belong */
-	lis	r3, CFG_DFL_GT_REGS@h
-	ori	r3, r3, CFG_DFL_GT_REGS@l
-	lis	r4, CFG_GT_REGS@h
-	ori	r4, r4, CFG_GT_REGS@l
+	lis	r3, CONFIG_SYS_DFL_GT_REGS@h
+	ori	r3, r3, CONFIG_SYS_DFL_GT_REGS@l
+	lis	r4, CONFIG_SYS_GT_REGS@h
+	ori	r4, r4, CONFIG_SYS_GT_REGS@l
 	li	r5, INTERNAL_SPACE_DECODE
 
 	/* test to see if we've already moved */
diff --git a/board/Marvell/common/ns16550.c b/board/Marvell/common/ns16550.c
index 475445b78..7fbf28a60 100644
--- a/board/Marvell/common/ns16550.c
+++ b/board/Marvell/common/ns16550.c
@@ -1,7 +1,7 @@
 /*
  * COM1 NS16550 support
  * originally from linux source (arch/ppc/boot/ns16550.c)
- * modified to use CFG_ISA_MEM and new defines
+ * modified to use CONFIG_SYS_ISA_MEM and new defines
  *
  * further modified by Josh Huber <huber@mclx.com> to support
  * the DUART on the Galileo Eval board. (db64360)
@@ -13,8 +13,8 @@
 #ifdef ZUMA_NTL
 /* no 16550 device */
 #else
-const NS16550_t COM_PORTS[] = { (NS16550_t) (CFG_DUART_IO + 0),
-	(NS16550_t) (CFG_DUART_IO + 0x20)
+const NS16550_t COM_PORTS[] = { (NS16550_t) (CONFIG_SYS_DUART_IO + 0),
+	(NS16550_t) (CONFIG_SYS_DUART_IO + 0x20)
 };
 
 volatile struct NS16550 *NS16550_init (int chan, int baud_divisor)
diff --git a/board/Marvell/common/ns16550.h b/board/Marvell/common/ns16550.h
index f2ed2abc9..b9691ab5a 100644
--- a/board/Marvell/common/ns16550.h
+++ b/board/Marvell/common/ns16550.h
@@ -2,7 +2,7 @@
  * NS16550 Serial Port
  * originally from linux source (arch/ppc/boot/ns16550.h)
  * modified slightly to
- * have addresses as offsets from CFG_ISA_BASE
+ * have addresses as offsets from CONFIG_SYS_ISA_BASE
  * added a few more definitions
  * added prototypes for ns16550.c
  * reduced no of com ports to 2
diff --git a/board/Marvell/common/serial.c b/board/Marvell/common/serial.c
index 01efbea77..3e7f406ff 100644
--- a/board/Marvell/common/serial.c
+++ b/board/Marvell/common/serial.c
@@ -52,17 +52,17 @@ DECLARE_GLOBAL_DATA_PTR;
 
 int serial_init (void)
 {
-#if (defined CFG_INIT_CHAN1) || (defined CFG_INIT_CHAN2)
+#if (defined CONFIG_SYS_INIT_CHAN1) || (defined CONFIG_SYS_INIT_CHAN2)
 	int clock_divisor = 230400 / gd->baudrate;
 #endif
 
 	mpsc_init (gd->baudrate);
 
 	/* init the DUART chans so that KGDB in the kernel can use them */
-#ifdef CFG_INIT_CHAN1
+#ifdef CONFIG_SYS_INIT_CHAN1
 	NS16550_reinit (COM_PORTS[0], clock_divisor);
 #endif
-#ifdef CFG_INIT_CHAN2
+#ifdef CONFIG_SYS_INIT_CHAN2
 	NS16550_reinit (COM_PORTS[1], clock_divisor);
 #endif
 	return (0);
@@ -97,10 +97,10 @@ int serial_init (void)
 {
 	int clock_divisor = 230400 / gd->baudrate;
 
-#ifdef CFG_INIT_CHAN1
+#ifdef CONFIG_SYS_INIT_CHAN1
 	(void) NS16550_init (0, clock_divisor);
 #endif
-#ifdef CFG_INIT_CHAN2
+#ifdef CONFIG_SYS_INIT_CHAN2
 	(void) NS16550_init (1, clock_divisor);
 #endif
 	return (0);
@@ -109,29 +109,29 @@ int serial_init (void)
 void serial_putc (const char c)
 {
 	if (c == '\n')
-		NS16550_putc (COM_PORTS[CFG_DUART_CHAN], '\r');
+		NS16550_putc (COM_PORTS[CONFIG_SYS_DUART_CHAN], '\r');
 
-	NS16550_putc (COM_PORTS[CFG_DUART_CHAN], c);
+	NS16550_putc (COM_PORTS[CONFIG_SYS_DUART_CHAN], c);
 }
 
 int serial_getc (void)
 {
-	return NS16550_getc (COM_PORTS[CFG_DUART_CHAN]);
+	return NS16550_getc (COM_PORTS[CONFIG_SYS_DUART_CHAN]);
 }
 
 int serial_tstc (void)
 {
-	return NS16550_tstc (COM_PORTS[CFG_DUART_CHAN]);
+	return NS16550_tstc (COM_PORTS[CONFIG_SYS_DUART_CHAN]);
 }
 
 void serial_setbrg (void)
 {
 	int clock_divisor = 230400 / gd->baudrate;
 
-#ifdef CFG_INIT_CHAN1
+#ifdef CONFIG_SYS_INIT_CHAN1
 	NS16550_reinit (COM_PORTS[0], clock_divisor);
 #endif
-#ifdef CFG_INIT_CHAN2
+#ifdef CONFIG_SYS_INIT_CHAN2
 	NS16550_reinit (COM_PORTS[1], clock_divisor);
 #endif
 }
diff --git a/board/Marvell/db64360/db64360.c b/board/Marvell/db64360/db64360.c
index 2a810a618..35b695e86 100644
--- a/board/Marvell/db64360/db64360.c
+++ b/board/Marvell/db64360/db64360.c
@@ -33,6 +33,7 @@
 #include "../include/pci.h"
 #include "../include/mv_gen_reg.h"
 #include <net.h>
+#include <netdev.h>
 
 #include "eth.h"
 #include "mpsc.h"
@@ -54,7 +55,7 @@
 /* ------------------------------------------------------------------------- */
 
 /* this is the current GT register space location */
-/* it starts at CFG_DFL_GT_REGS but moves later to CFG_GT_REGS */
+/* it starts at CONFIG_SYS_DFL_GT_REGS but moves later to CONFIG_SYS_GT_REGS */
 
 /* Unfortunately, we cant change it while we are in flash, so we initialize it
  * to the "final" value. This means that any debug_led calls before
@@ -63,7 +64,7 @@
  */
 
 void board_prebootm_init (void);
-unsigned int INTERNAL_REG_BASE_ADDR = CFG_GT_REGS;
+unsigned int INTERNAL_REG_BASE_ADDR = CONFIG_SYS_GT_REGS;
 int display_mem_map (void);
 
 /* ------------------------------------------------------------------------- */
@@ -126,7 +127,7 @@ static void gt_pci_config (void)
 
 		GT_REG_WRITE (PCI_0_CONFIG_ADDR, BIT31 | val);
 		GT_REG_WRITE (PCI_0_CONFIG_DATA_VIRTUAL_REG,
-			      (stat & 0xffff0000) | CFG_PCI_IDSEL);
+			      (stat & 0xffff0000) | CONFIG_SYS_PCI_IDSEL);
 
 	}
 	if ((GTREGREAD (PCI_1_MODE) & (BIT4 | BIT5)) != 0) {	/*if  PCI-X */
@@ -135,7 +136,7 @@ static void gt_pci_config (void)
 
 		GT_REG_WRITE (PCI_1_CONFIG_ADDR, BIT31 | val);
 		GT_REG_WRITE (PCI_1_CONFIG_DATA_VIRTUAL_REG,
-			      (stat & 0xffff0000) | CFG_PCI_IDSEL);
+			      (stat & 0xffff0000) | CONFIG_SYS_PCI_IDSEL);
 	}
 
 	/* Enable master */
@@ -153,21 +154,21 @@ static void gt_pci_config (void)
 	/* ronen- add write to pci remap registers for 64460.
 	   in 64360 when writing to pci base go and overide remap automaticaly,
 	   in 64460 it doesn't */
-	GT_REG_WRITE (PCI_0_IO_BASE_ADDR, CFG_PCI0_IO_BASE >> 16);
-	GT_REG_WRITE (PCI_0I_O_ADDRESS_REMAP, CFG_PCI0_IO_BASE >> 16);
-	GT_REG_WRITE (PCI_0_IO_SIZE, (CFG_PCI0_IO_SIZE - 1) >> 16);
+	GT_REG_WRITE (PCI_0_IO_BASE_ADDR, CONFIG_SYS_PCI0_IO_BASE >> 16);
+	GT_REG_WRITE (PCI_0I_O_ADDRESS_REMAP, CONFIG_SYS_PCI0_IO_BASE >> 16);
+	GT_REG_WRITE (PCI_0_IO_SIZE, (CONFIG_SYS_PCI0_IO_SIZE - 1) >> 16);
 
-	GT_REG_WRITE (PCI_0_MEMORY0_BASE_ADDR, CFG_PCI0_MEM_BASE >> 16);
-	GT_REG_WRITE (PCI_0MEMORY0_ADDRESS_REMAP, CFG_PCI0_MEM_BASE >> 16);
-	GT_REG_WRITE (PCI_0_MEMORY0_SIZE, (CFG_PCI0_MEM_SIZE - 1) >> 16);
+	GT_REG_WRITE (PCI_0_MEMORY0_BASE_ADDR, CONFIG_SYS_PCI0_MEM_BASE >> 16);
+	GT_REG_WRITE (PCI_0MEMORY0_ADDRESS_REMAP, CONFIG_SYS_PCI0_MEM_BASE >> 16);
+	GT_REG_WRITE (PCI_0_MEMORY0_SIZE, (CONFIG_SYS_PCI0_MEM_SIZE - 1) >> 16);
 
-	GT_REG_WRITE (PCI_1_IO_BASE_ADDR, CFG_PCI1_IO_BASE >> 16);
-	GT_REG_WRITE (PCI_1I_O_ADDRESS_REMAP, CFG_PCI1_IO_BASE >> 16);
-	GT_REG_WRITE (PCI_1_IO_SIZE, (CFG_PCI1_IO_SIZE - 1) >> 16);
+	GT_REG_WRITE (PCI_1_IO_BASE_ADDR, CONFIG_SYS_PCI1_IO_BASE >> 16);
+	GT_REG_WRITE (PCI_1I_O_ADDRESS_REMAP, CONFIG_SYS_PCI1_IO_BASE >> 16);
+	GT_REG_WRITE (PCI_1_IO_SIZE, (CONFIG_SYS_PCI1_IO_SIZE - 1) >> 16);
 
-	GT_REG_WRITE (PCI_1_MEMORY0_BASE_ADDR, CFG_PCI1_MEM_BASE >> 16);
-	GT_REG_WRITE (PCI_1MEMORY0_ADDRESS_REMAP, CFG_PCI1_MEM_BASE >> 16);
-	GT_REG_WRITE (PCI_1_MEMORY0_SIZE, (CFG_PCI1_MEM_SIZE - 1) >> 16);
+	GT_REG_WRITE (PCI_1_MEMORY0_BASE_ADDR, CONFIG_SYS_PCI1_MEM_BASE >> 16);
+	GT_REG_WRITE (PCI_1MEMORY0_ADDRESS_REMAP, CONFIG_SYS_PCI1_MEM_BASE >> 16);
+	GT_REG_WRITE (PCI_1_MEMORY0_SIZE, (CONFIG_SYS_PCI1_MEM_SIZE - 1) >> 16);
 
 	/* PCI interface settings */
 	/* Timeout set to retry forever */
@@ -183,7 +184,7 @@ static void gt_pci_config (void)
 	for (stat = 0; stat <= PCI_HOST1; stat++)
 		pciWriteConfigReg (stat,
 				   PCI_INTERNAL_REGISTERS_MEMORY_MAPPED_BASE_ADDRESS,
-				   SELF, CFG_GT_REGS);
+				   SELF, CONFIG_SYS_GT_REGS);
 #endif
 
 }
@@ -199,7 +200,7 @@ static void gt_cpu_config (void)
 	tmp = GTREGREAD (CPU_CONFIGURATION);
 
 	/* set the SINGLE_CPU bit  see MV64360 P.399 */
-#ifndef CFG_GT_DUAL_CPU		/* SINGLE_CPU seems to cause JTAG problems */
+#ifndef CONFIG_SYS_GT_DUAL_CPU		/* SINGLE_CPU seems to cause JTAG problems */
 	tmp |= CPU_CONF_SINGLE_CPU;
 #endif
 
@@ -250,7 +251,7 @@ int board_early_init_f (void)
 	 * it last time. (huber)
 	 */
 
-	my_remap_gt_regs (CFG_DFL_GT_REGS, CFG_GT_REGS);
+	my_remap_gt_regs (CONFIG_SYS_DFL_GT_REGS, CONFIG_SYS_GT_REGS);
 
 	/* No PCI in first release of Port To_do: enable it. */
 #ifdef CONFIG_PCI
@@ -296,56 +297,56 @@ int board_early_init_f (void)
 	 * on-board sram on the eval board, and updates the correct
 	 * registers to boot from the sram. (device0)
 	 */
-	if (memoryGetDeviceBaseAddress (DEVICE0) == CFG_DFL_BOOTCS_BASE)
+	if (memoryGetDeviceBaseAddress (DEVICE0) == CONFIG_SYS_DFL_BOOTCS_BASE)
 		sram_boot = 1;
 	if (!sram_boot)
-		memoryMapDeviceSpace (DEVICE0, CFG_DEV0_SPACE, CFG_DEV0_SIZE);
+		memoryMapDeviceSpace (DEVICE0, CONFIG_SYS_DEV0_SPACE, CONFIG_SYS_DEV0_SIZE);
 
-	memoryMapDeviceSpace (DEVICE1, CFG_DEV1_SPACE, CFG_DEV1_SIZE);
-	memoryMapDeviceSpace (DEVICE2, CFG_DEV2_SPACE, CFG_DEV2_SIZE);
-	memoryMapDeviceSpace (DEVICE3, CFG_DEV3_SPACE, CFG_DEV3_SIZE);
+	memoryMapDeviceSpace (DEVICE1, CONFIG_SYS_DEV1_SPACE, CONFIG_SYS_DEV1_SIZE);
+	memoryMapDeviceSpace (DEVICE2, CONFIG_SYS_DEV2_SPACE, CONFIG_SYS_DEV2_SIZE);
+	memoryMapDeviceSpace (DEVICE3, CONFIG_SYS_DEV3_SPACE, CONFIG_SYS_DEV3_SIZE);
 
 
 	/* configure device timing */
-#ifdef CFG_DEV0_PAR		/* set port parameters for SRAM device module access */
+#ifdef CONFIG_SYS_DEV0_PAR		/* set port parameters for SRAM device module access */
 	if (!sram_boot)
-		GT_REG_WRITE (DEVICE_BANK0PARAMETERS, CFG_DEV0_PAR);
+		GT_REG_WRITE (DEVICE_BANK0PARAMETERS, CONFIG_SYS_DEV0_PAR);
 #endif
 
-#ifdef CFG_DEV1_PAR		/* set port parameters for RTC device module access */
-	GT_REG_WRITE (DEVICE_BANK1PARAMETERS, CFG_DEV1_PAR);
+#ifdef CONFIG_SYS_DEV1_PAR		/* set port parameters for RTC device module access */
+	GT_REG_WRITE (DEVICE_BANK1PARAMETERS, CONFIG_SYS_DEV1_PAR);
 #endif
-#ifdef CFG_DEV2_PAR		/* set port parameters for DUART device module access */
-	GT_REG_WRITE (DEVICE_BANK2PARAMETERS, CFG_DEV2_PAR);
+#ifdef CONFIG_SYS_DEV2_PAR		/* set port parameters for DUART device module access */
+	GT_REG_WRITE (DEVICE_BANK2PARAMETERS, CONFIG_SYS_DEV2_PAR);
 #endif
 
-#ifdef CFG_32BIT_BOOT_PAR	/* set port parameters for Flash device module access */
+#ifdef CONFIG_SYS_32BIT_BOOT_PAR	/* set port parameters for Flash device module access */
 	/* detect if we are booting from the 32 bit flash */
 	if (GTREGREAD (DEVICE_BOOT_BANK_PARAMETERS) & (0x3 << 20)) {
 		/* 32 bit boot flash */
-		GT_REG_WRITE (DEVICE_BANK3PARAMETERS, CFG_8BIT_BOOT_PAR);
+		GT_REG_WRITE (DEVICE_BANK3PARAMETERS, CONFIG_SYS_8BIT_BOOT_PAR);
 		GT_REG_WRITE (DEVICE_BOOT_BANK_PARAMETERS,
-			      CFG_32BIT_BOOT_PAR);
+			      CONFIG_SYS_32BIT_BOOT_PAR);
 	} else {
 		/* 8 bit boot flash */
-		GT_REG_WRITE (DEVICE_BANK3PARAMETERS, CFG_32BIT_BOOT_PAR);
-		GT_REG_WRITE (DEVICE_BOOT_BANK_PARAMETERS, CFG_8BIT_BOOT_PAR);
+		GT_REG_WRITE (DEVICE_BANK3PARAMETERS, CONFIG_SYS_32BIT_BOOT_PAR);
+		GT_REG_WRITE (DEVICE_BOOT_BANK_PARAMETERS, CONFIG_SYS_8BIT_BOOT_PAR);
 	}
 #else
 	/* 8 bit boot flash only */
-/*	GT_REG_WRITE(DEVICE_BOOT_BANK_PARAMETERS, CFG_8BIT_BOOT_PAR);*/
+/*	GT_REG_WRITE(DEVICE_BOOT_BANK_PARAMETERS, CONFIG_SYS_8BIT_BOOT_PAR);*/
 #endif
 
 
 	gt_cpu_config ();
 
 	/* MPP setup */
-	GT_REG_WRITE (MPP_CONTROL0, CFG_MPP_CONTROL_0);
-	GT_REG_WRITE (MPP_CONTROL1, CFG_MPP_CONTROL_1);
-	GT_REG_WRITE (MPP_CONTROL2, CFG_MPP_CONTROL_2);
-	GT_REG_WRITE (MPP_CONTROL3, CFG_MPP_CONTROL_3);
+	GT_REG_WRITE (MPP_CONTROL0, CONFIG_SYS_MPP_CONTROL_0);
+	GT_REG_WRITE (MPP_CONTROL1, CONFIG_SYS_MPP_CONTROL_1);
+	GT_REG_WRITE (MPP_CONTROL2, CONFIG_SYS_MPP_CONTROL_2);
+	GT_REG_WRITE (MPP_CONTROL3, CONFIG_SYS_MPP_CONTROL_3);
 
-	GT_REG_WRITE (GPP_LEVEL_CONTROL, CFG_GPP_LEVEL_CONTROL);
+	GT_REG_WRITE (GPP_LEVEL_CONTROL, CONFIG_SYS_GPP_LEVEL_CONTROL);
 	DEBUG_LED0_ON ();
 	DEBUG_LED1_ON ();
 	DEBUG_LED2_ON ();
@@ -358,7 +359,7 @@ int board_early_init_f (void)
 int misc_init_r ()
 {
 	icache_enable ();
-#ifdef CFG_L2
+#ifdef CONFIG_SYS_L2
 	l2cache_enable ();
 #endif
 #ifdef CONFIG_MPSC
@@ -379,9 +380,9 @@ void after_reloc (ulong dest_addr, gd_t * gd)
 	/* check to see if we booted from the sram.  If so, move things
 	 * back to the way they should be. (we're running from main
 	 * memory at this point now */
-	if (memoryGetDeviceBaseAddress (DEVICE0) == CFG_DFL_BOOTCS_BASE) {
-		memoryMapDeviceSpace (DEVICE0, CFG_DEV0_SPACE, CFG_DEV0_SIZE);
-		memoryMapDeviceSpace (BOOT_DEVICE, CFG_DFL_BOOTCS_BASE, _8M);
+	if (memoryGetDeviceBaseAddress (DEVICE0) == CONFIG_SYS_DFL_BOOTCS_BASE) {
+		memoryMapDeviceSpace (DEVICE0, CONFIG_SYS_DEV0_SPACE, CONFIG_SYS_DEV0_SIZE);
+		memoryMapDeviceSpace (BOOT_DEVICE, CONFIG_SYS_DFL_BOOTCS_BASE, _8M);
 	}
 	display_mem_map ();
 	/* now, jump to the main ppcboot board init code */
@@ -401,7 +402,7 @@ int checkboard (void)
 {
 	int l_type = 0;
 
-	printf ("BOARD: %s\n", CFG_BOARD_NAME);
+	printf ("BOARD: %s\n", CONFIG_SYS_BOARD_NAME);
 	return (l_type);
 }
 
@@ -414,34 +415,34 @@ void debug_led (int led, int mode)
 	if (mode == 1) {
 		switch (led) {
 		case 0:
-			addr = (int *) ((unsigned int) CFG_DEV1_SPACE |
+			addr = (int *) ((unsigned int) CONFIG_SYS_DEV1_SPACE |
 					0x08000);
 			break;
 
 		case 1:
-			addr = (int *) ((unsigned int) CFG_DEV1_SPACE |
+			addr = (int *) ((unsigned int) CONFIG_SYS_DEV1_SPACE |
 					0x0c000);
 			break;
 
 		case 2:
-			addr = (int *) ((unsigned int) CFG_DEV1_SPACE |
+			addr = (int *) ((unsigned int) CONFIG_SYS_DEV1_SPACE |
 					0x10000);
 			break;
 		}
 	} else if (mode == 0) {
 		switch (led) {
 		case 0:
-			addr = (int *) ((unsigned int) CFG_DEV1_SPACE |
+			addr = (int *) ((unsigned int) CONFIG_SYS_DEV1_SPACE |
 					0x14000);
 			break;
 
 		case 1:
-			addr = (int *) ((unsigned int) CFG_DEV1_SPACE |
+			addr = (int *) ((unsigned int) CONFIG_SYS_DEV1_SPACE |
 					0x18000);
 			break;
 
 		case 2:
-			addr = (int *) ((unsigned int) CFG_DEV1_SPACE |
+			addr = (int *) ((unsigned int) CONFIG_SYS_DEV1_SPACE |
 					0x1c000);
 			break;
 		}
@@ -512,7 +513,7 @@ int display_mem_map (void)
 
 /* DRAM check routines copied from gw8260 */
 
-#if defined (CFG_DRAM_TEST)
+#if defined (CONFIG_SYS_DRAM_TEST)
 
 /*********************************************************************/
 /* NAME:  move64() -  moves a double word (64-bit)		     */
@@ -543,7 +544,7 @@ static void move64 (unsigned long long *src, unsigned long long *dest)
 }
 
 
-#if defined (CFG_DRAM_TEST_DATA)
+#if defined (CONFIG_SYS_DRAM_TEST_DATA)
 
 unsigned long long pattern[] = {
 	0xaaaaaaaaaaaaaaaaULL,
@@ -606,7 +607,7 @@ unsigned long long pattern[] = {
 /*********************************************************************/
 int mem_test_data (void)
 {
-	unsigned long long *pmem = (unsigned long long *) CFG_MEMTEST_START;
+	unsigned long long *pmem = (unsigned long long *) CONFIG_SYS_MEMTEST_START;
 	unsigned long long temp64 = 0;
 	int num_patterns = sizeof (pattern) / sizeof (pattern[0]);
 	int i;
@@ -633,9 +634,9 @@ int mem_test_data (void)
 
 	return 0;
 }
-#endif /* CFG_DRAM_TEST_DATA */
+#endif /* CONFIG_SYS_DRAM_TEST_DATA */
 
-#if defined (CFG_DRAM_TEST_ADDRESS)
+#if defined (CONFIG_SYS_DRAM_TEST_ADDRESS)
 /*********************************************************************/
 /* NAME:  mem_test_address() -	test address lines		     */
 /*								     */
@@ -660,8 +661,8 @@ int mem_test_data (void)
 int mem_test_address (void)
 {
 	volatile unsigned int *pmem =
-		(volatile unsigned int *) CFG_MEMTEST_START;
-	const unsigned int size = (CFG_MEMTEST_END - CFG_MEMTEST_START) / 4;
+		(volatile unsigned int *) CONFIG_SYS_MEMTEST_START;
+	const unsigned int size = (CONFIG_SYS_MEMTEST_END - CONFIG_SYS_MEMTEST_START) / 4;
 	unsigned int i;
 
 	/* write address to each location */
@@ -678,9 +679,9 @@ int mem_test_address (void)
 	}
 	return 0;
 }
-#endif /* CFG_DRAM_TEST_ADDRESS */
+#endif /* CONFIG_SYS_DRAM_TEST_ADDRESS */
 
-#if defined (CFG_DRAM_TEST_WALK)
+#if defined (CONFIG_SYS_DRAM_TEST_WALK)
 /*********************************************************************/
 /* NAME:   mem_march() -  memory march				     */
 /*								     */
@@ -738,7 +739,7 @@ int mem_march (volatile unsigned long long *base,
 	}
 	return 0;
 }
-#endif /* CFG_DRAM_TEST_WALK */
+#endif /* CONFIG_SYS_DRAM_TEST_WALK */
 
 /*********************************************************************/
 /* NAME:   mem_test_walk() -  a simple walking ones test	     */
@@ -770,8 +771,8 @@ int mem_test_walk (void)
 {
 	unsigned long long mask;
 	volatile unsigned long long *pmem =
-		(volatile unsigned long long *) CFG_MEMTEST_START;
-	const unsigned long size = (CFG_MEMTEST_END - CFG_MEMTEST_START) / 8;
+		(volatile unsigned long long *) CONFIG_SYS_MEMTEST_START;
+	const unsigned long size = (CONFIG_SYS_MEMTEST_END - CONFIG_SYS_MEMTEST_START) / 8;
 
 	unsigned int i;
 
@@ -847,9 +848,9 @@ int testdram (void)
 /*    runwalk = 0; */
 
 	if ((rundata == 1) || (runaddress == 1) || (runwalk == 1)) {
-		printf ("Testing RAM from 0x%08x to 0x%08x ...  (don't panic... that will take a moment !!!!)\n", CFG_MEMTEST_START, CFG_MEMTEST_END);
+		printf ("Testing RAM from 0x%08x to 0x%08x ...  (don't panic... that will take a moment !!!!)\n", CONFIG_SYS_MEMTEST_START, CONFIG_SYS_MEMTEST_END);
 	}
-#ifdef CFG_DRAM_TEST_DATA
+#ifdef CONFIG_SYS_DRAM_TEST_DATA
 	if (rundata == 1) {
 		printf ("Test DATA ...  ");
 		if (mem_test_data () == 1) {
@@ -859,7 +860,7 @@ int testdram (void)
 			printf ("ok \n");
 	}
 #endif
-#ifdef CFG_DRAM_TEST_ADDRESS
+#ifdef CONFIG_SYS_DRAM_TEST_ADDRESS
 	if (runaddress == 1) {
 		printf ("Test ADDRESS ...  ");
 		if (mem_test_address () == 1) {
@@ -869,7 +870,7 @@ int testdram (void)
 			printf ("ok \n");
 	}
 #endif
-#ifdef CFG_DRAM_TEST_WALK
+#ifdef CONFIG_SYS_DRAM_TEST_WALK
 	if (runwalk == 1) {
 		printf ("Test WALKING ONEs ...  ");
 		if (mem_test_walk () == 1) {
@@ -885,7 +886,7 @@ int testdram (void)
 	return 0;
 
 }
-#endif /* CFG_DRAM_TEST */
+#endif /* CONFIG_SYS_DRAM_TEST */
 
 /* ronen - the below functions are used by the bootm function           */
 /*  - we map the base register to fbe00000 (same mapping as in the LSP) */
@@ -924,8 +925,13 @@ void board_prebootm_init ()
 /* MV_REG_WRITE (MV64360_ETH_RECEIVE_QUEUE_COMMAND_REG(2), 0x0000ff00); */
 
 /* Relocate MV64360 internal regs */
-	my_remap_gt_regs_bootm (CFG_GT_REGS, BRIDGE_REG_BASE_BOOTM);
+	my_remap_gt_regs_bootm (CONFIG_SYS_GT_REGS, BRIDGE_REG_BASE_BOOTM);
 
 	icache_disable ();
 	dcache_disable ();
 }
+
+int board_eth_init(bd_t *bis)
+{
+	return pci_eth_init(bis);
+}
diff --git a/board/Marvell/db64360/mpsc.c b/board/Marvell/db64360/mpsc.c
index 923d95555..7ad6ae8c0 100644
--- a/board/Marvell/db64360/mpsc.c
+++ b/board/Marvell/db64360/mpsc.c
@@ -426,7 +426,7 @@ void mpsc_sdma_init (void)
 			  (MV64360_CUNIT_BASE_ADDR_WIN_0_BIT * 2)));
 
 /* Setup MPSC internal address space base address	*/
-	GT_REG_WRITE (CUNIT_INTERNAL_SPACE_BASE_ADDR_REG, CFG_GT_REGS);
+	GT_REG_WRITE (CUNIT_INTERNAL_SPACE_BASE_ADDR_REG, CONFIG_SYS_GT_REGS);
 
 /* no high address remap*/
 	GT_REG_WRITE (CUNIT_HIGH_ADDR_REMAP_REG0, 0x00);
@@ -516,9 +516,9 @@ int galbrg_set_baudrate (int channel, int rate)
 
 #ifdef ZUMA_NTL
 	/* from tclk */
-	clock = (CFG_TCLK / (16 * rate)) - 1;
+	clock = (CONFIG_SYS_TCLK / (16 * rate)) - 1;
 #else
-	clock = (CFG_TCLK / (16 * rate)) - 1;
+	clock = (CONFIG_SYS_TCLK / (16 * rate)) - 1;
 #endif
 
 	galbrg_set_CDV (channel, clock);	/* set timer Reg. for BRG */
diff --git a/board/Marvell/db64360/pci.c b/board/Marvell/db64360/pci.c
index 563728412..499809514 100644
--- a/board/Marvell/db64360/pci.c
+++ b/board/Marvell/db64360/pci.c
@@ -52,13 +52,13 @@ static void gt_pci_bus_mode_display (PCI_HOST host)
 		printf ("PCI %d bus mode: Conventional PCI\n", host);
 		break;
 	case 1:
-		printf ("PCI %d bus mode: 66 Mhz PCIX\n", host);
+		printf ("PCI %d bus mode: 66 MHz PCIX\n", host);
 		break;
 	case 2:
-		printf ("PCI %d bus mode: 100 Mhz PCIX\n", host);
+		printf ("PCI %d bus mode: 100 MHz PCIX\n", host);
 		break;
 	case 3:
-		printf ("PCI %d bus mode: 133 Mhz PCIX\n", host);
+		printf ("PCI %d bus mode: 133 MHz PCIX\n", host);
 		break;
 	default:
 		printf ("Unknown BUS %d\n", mode);
@@ -859,14 +859,14 @@ void pci_init_board (void)
 
 	/* PCI memory space */
 	pci_set_region (pci0_hose.regions + 0,
-			CFG_PCI0_0_MEM_SPACE,
-			CFG_PCI0_0_MEM_SPACE,
-			CFG_PCI0_MEM_SIZE, PCI_REGION_MEM);
+			CONFIG_SYS_PCI0_0_MEM_SPACE,
+			CONFIG_SYS_PCI0_0_MEM_SPACE,
+			CONFIG_SYS_PCI0_MEM_SIZE, PCI_REGION_MEM);
 
 	/* PCI I/O space */
 	pci_set_region (pci0_hose.regions + 1,
-			CFG_PCI0_IO_SPACE_PCI,
-			CFG_PCI0_IO_SPACE, CFG_PCI0_IO_SIZE, PCI_REGION_IO);
+			CONFIG_SYS_PCI0_IO_SPACE_PCI,
+			CONFIG_SYS_PCI0_IO_SPACE, CONFIG_SYS_PCI0_IO_SIZE, PCI_REGION_IO);
 
 	pci_set_ops (&pci0_hose,
 		     pci_hose_read_config_byte_via_dword,
@@ -901,14 +901,14 @@ void pci_init_board (void)
 
 	/* PCI memory space */
 	pci_set_region (pci1_hose.regions + 0,
-			CFG_PCI1_0_MEM_SPACE,
-			CFG_PCI1_0_MEM_SPACE,
-			CFG_PCI1_MEM_SIZE, PCI_REGION_MEM);
+			CONFIG_SYS_PCI1_0_MEM_SPACE,
+			CONFIG_SYS_PCI1_0_MEM_SPACE,
+			CONFIG_SYS_PCI1_MEM_SIZE, PCI_REGION_MEM);
 
 	/* PCI I/O space */
 	pci_set_region (pci1_hose.regions + 1,
-			CFG_PCI1_IO_SPACE_PCI,
-			CFG_PCI1_IO_SPACE, CFG_PCI1_IO_SIZE, PCI_REGION_IO);
+			CONFIG_SYS_PCI1_IO_SPACE_PCI,
+			CONFIG_SYS_PCI1_IO_SPACE, CONFIG_SYS_PCI1_IO_SIZE, PCI_REGION_IO);
 
 	pci_set_ops (&pci1_hose,
 		     pci_hose_read_config_byte_via_dword,
diff --git a/board/Marvell/db64360/sdram_init.c b/board/Marvell/db64360/sdram_init.c
index ecadaf271..d0817d7e2 100644
--- a/board/Marvell/db64360/sdram_init.c
+++ b/board/Marvell/db64360/sdram_init.c
@@ -312,7 +312,7 @@ return 0;
 	} else
 		dimmInfo->slot = slot;	/* start to fill up dimminfo for this "slot" */
 
-#ifdef CFG_DISPLAY_DIMM_SPD_CONTENT
+#ifdef CONFIG_SYS_DISPLAY_DIMM_SPD_CONTENT
 
 	for (i = 0; i <= 127; i++) {
 		printf ("SPD-EEPROM Byte %3d = %3x (%3d)\n", i, data[i],
@@ -690,16 +690,16 @@ return 0;
 						if ((dimmInfo->
 						     minimumCycleTimeAtMaxCasLatancy_LoP
 						     <
-						     CFG_DDR_SDRAM_CYCLE_COUNT_LOP)
+						     CONFIG_SYS_DDR_SDRAM_CYCLE_COUNT_LOP)
 						    ||
 						    ((dimmInfo->
 						      minimumCycleTimeAtMaxCasLatancy_LoP
 						      ==
-						      CFG_DDR_SDRAM_CYCLE_COUNT_LOP)
+						      CONFIG_SYS_DDR_SDRAM_CYCLE_COUNT_LOP)
 						     && (dimmInfo->
 							 minimumCycleTimeAtMaxCasLatancy_RoP
 							 <
-							 CFG_DDR_SDRAM_CYCLE_COUNT_ROP)))
+							 CONFIG_SYS_DDR_SDRAM_CYCLE_COUNT_ROP)))
 						{
 							dimmInfo->
 								maxClSupported_DDR
@@ -714,16 +714,16 @@ return 0;
 						if ((dimmInfo->
 						     minimumCycleTimeAtMaxCasLatancy_LoP
 						     >
-						     CFG_DDR_SDRAM_CYCLE_COUNT_LOP)
+						     CONFIG_SYS_DDR_SDRAM_CYCLE_COUNT_LOP)
 						    ||
 						    ((dimmInfo->
 						      minimumCycleTimeAtMaxCasLatancy_LoP
 						      ==
-						      CFG_DDR_SDRAM_CYCLE_COUNT_LOP)
+						      CONFIG_SYS_DDR_SDRAM_CYCLE_COUNT_LOP)
 						     && (dimmInfo->
 							 minimumCycleTimeAtMaxCasLatancy_RoP
 							 >
-							 CFG_DDR_SDRAM_CYCLE_COUNT_ROP)))
+							 CONFIG_SYS_DDR_SDRAM_CYCLE_COUNT_ROP)))
 						{
 							printf ("*********************************************************\n");
 							printf ("*** sysClock is higher than SDRAM's allowed frequency ***\n");
@@ -1290,37 +1290,37 @@ int setup_sdram (AUX_MEM_DIMM_INFO * info)
 	case 0x0:
 	case 0x80:		/* refresh period is 15.625 usec */
 		sdram_config_reg =
-			(unsigned int) (((float) 15.625 * (float) CFG_BUS_HZ)
+			(unsigned int) (((float) 15.625 * (float) CONFIG_SYS_BUS_HZ)
 					/ (float) 1000000.0);
 		break;
 	case 0x1:
 	case 0x81:		/* refresh period is 3.9 usec */
 		sdram_config_reg =
-			(unsigned int) (((float) 3.9 * (float) CFG_BUS_HZ) /
+			(unsigned int) (((float) 3.9 * (float) CONFIG_SYS_BUS_HZ) /
 					(float) 1000000.0);
 		break;
 	case 0x2:
 	case 0x82:		/* refresh period is 7.8 usec */
 		sdram_config_reg =
-			(unsigned int) (((float) 7.8 * (float) CFG_BUS_HZ) /
+			(unsigned int) (((float) 7.8 * (float) CONFIG_SYS_BUS_HZ) /
 					(float) 1000000.0);
 		break;
 	case 0x3:
 	case 0x83:		/* refresh period is 31.3 usec */
 		sdram_config_reg =
-			(unsigned int) (((float) 31.3 * (float) CFG_BUS_HZ) /
+			(unsigned int) (((float) 31.3 * (float) CONFIG_SYS_BUS_HZ) /
 					(float) 1000000.0);
 		break;
 	case 0x4:
 	case 0x84:		/* refresh period is 62.5 usec */
 		sdram_config_reg =
-			(unsigned int) (((float) 62.5 * (float) CFG_BUS_HZ) /
+			(unsigned int) (((float) 62.5 * (float) CONFIG_SYS_BUS_HZ) /
 					(float) 1000000.0);
 		break;
 	case 0x5:
 	case 0x85:		/* refresh period is 125 usec */
 		sdram_config_reg =
-			(unsigned int) (((float) 125 * (float) CFG_BUS_HZ) /
+			(unsigned int) (((float) 125 * (float) CONFIG_SYS_BUS_HZ) /
 					(float) 1000000.0);
 		break;
 	default:		/* refresh period undefined */
@@ -1807,7 +1807,7 @@ phys_size_t initdram (int board_type)
 
 	printf ("-- DIMM2 has %d banks\n", dimmInfo2.numOfModuleBanks);
 
-	for (bank_no = 0; bank_no < CFG_DRAM_BANKS; bank_no++) {
+	for (bank_no = 0; bank_no < CONFIG_SYS_DRAM_BANKS; bank_no++) {
 		/* skip over banks that are not populated */
 		if (!checkbank[bank_no])
 			continue;
diff --git a/board/Marvell/db64360/u-boot.lds b/board/Marvell/db64360/u-boot.lds
index 1a95755ab..ff2d8b7fe 100644
--- a/board/Marvell/db64360/u-boot.lds
+++ b/board/Marvell/db64360/u-boot.lds
@@ -60,7 +60,7 @@ SECTIONS
 
 /* store the environment in a seperate sector in the boot flash */
 /*    . = env_offset; */
-/*    common/environment.o(.text) */
+/*    common/env_embedded.o(.text) */
 
     *(.text)
     *(.fixup)
@@ -131,6 +131,7 @@ SECTIONS
    *(.dynbss)
    *(.bss)
    *(COMMON)
+   . = ALIGN(4);
   }
   _end = . ;
   PROVIDE (end = .);
diff --git a/board/Marvell/db64460/db64460.c b/board/Marvell/db64460/db64460.c
index 1ae898d1e..14e635592 100644
--- a/board/Marvell/db64460/db64460.c
+++ b/board/Marvell/db64460/db64460.c
@@ -33,6 +33,7 @@
 #include "../include/pci.h"
 #include "../include/mv_gen_reg.h"
 #include <net.h>
+#include <netdev.h>
 
 #include "eth.h"
 #include "mpsc.h"
@@ -54,7 +55,7 @@
 /* ------------------------------------------------------------------------- */
 
 /* this is the current GT register space location */
-/* it starts at CFG_DFL_GT_REGS but moves later to CFG_GT_REGS */
+/* it starts at CONFIG_SYS_DFL_GT_REGS but moves later to CONFIG_SYS_GT_REGS */
 
 /* Unfortunately, we cant change it while we are in flash, so we initialize it
  * to the "final" value. This means that any debug_led calls before
@@ -63,7 +64,7 @@
  */
 
 void board_prebootm_init (void);
-unsigned int INTERNAL_REG_BASE_ADDR = CFG_GT_REGS;
+unsigned int INTERNAL_REG_BASE_ADDR = CONFIG_SYS_GT_REGS;
 int display_mem_map (void);
 
 /* ------------------------------------------------------------------------- */
@@ -126,7 +127,7 @@ static void gt_pci_config (void)
 
 		GT_REG_WRITE (PCI_0_CONFIG_ADDR, BIT31 | val);
 		GT_REG_WRITE (PCI_0_CONFIG_DATA_VIRTUAL_REG,
-			      (stat & 0xffff0000) | CFG_PCI_IDSEL);
+			      (stat & 0xffff0000) | CONFIG_SYS_PCI_IDSEL);
 
 	}
 	if ((GTREGREAD (PCI_1_MODE) & (BIT4 | BIT5)) != 0) {	/*if  PCI-X */
@@ -135,7 +136,7 @@ static void gt_pci_config (void)
 
 		GT_REG_WRITE (PCI_1_CONFIG_ADDR, BIT31 | val);
 		GT_REG_WRITE (PCI_1_CONFIG_DATA_VIRTUAL_REG,
-			      (stat & 0xffff0000) | CFG_PCI_IDSEL);
+			      (stat & 0xffff0000) | CONFIG_SYS_PCI_IDSEL);
 	}
 
 	/* Enable master */
@@ -153,21 +154,21 @@ static void gt_pci_config (void)
 	/* ronen- add write to pci remap registers for 64460.
 	   in 64360 when writing to pci base go and overide remap automaticaly,
 	   in 64460 it doesn't */
-	GT_REG_WRITE (PCI_0_IO_BASE_ADDR, CFG_PCI0_IO_BASE >> 16);
-	GT_REG_WRITE (PCI_0I_O_ADDRESS_REMAP, CFG_PCI0_IO_BASE >> 16);
-	GT_REG_WRITE (PCI_0_IO_SIZE, (CFG_PCI0_IO_SIZE - 1) >> 16);
+	GT_REG_WRITE (PCI_0_IO_BASE_ADDR, CONFIG_SYS_PCI0_IO_BASE >> 16);
+	GT_REG_WRITE (PCI_0I_O_ADDRESS_REMAP, CONFIG_SYS_PCI0_IO_BASE >> 16);
+	GT_REG_WRITE (PCI_0_IO_SIZE, (CONFIG_SYS_PCI0_IO_SIZE - 1) >> 16);
 
-	GT_REG_WRITE (PCI_0_MEMORY0_BASE_ADDR, CFG_PCI0_MEM_BASE >> 16);
-	GT_REG_WRITE (PCI_0MEMORY0_ADDRESS_REMAP, CFG_PCI0_MEM_BASE >> 16);
-	GT_REG_WRITE (PCI_0_MEMORY0_SIZE, (CFG_PCI0_MEM_SIZE - 1) >> 16);
+	GT_REG_WRITE (PCI_0_MEMORY0_BASE_ADDR, CONFIG_SYS_PCI0_MEM_BASE >> 16);
+	GT_REG_WRITE (PCI_0MEMORY0_ADDRESS_REMAP, CONFIG_SYS_PCI0_MEM_BASE >> 16);
+	GT_REG_WRITE (PCI_0_MEMORY0_SIZE, (CONFIG_SYS_PCI0_MEM_SIZE - 1) >> 16);
 
-	GT_REG_WRITE (PCI_1_IO_BASE_ADDR, CFG_PCI1_IO_BASE >> 16);
-	GT_REG_WRITE (PCI_1I_O_ADDRESS_REMAP, CFG_PCI1_IO_BASE >> 16);
-	GT_REG_WRITE (PCI_1_IO_SIZE, (CFG_PCI1_IO_SIZE - 1) >> 16);
+	GT_REG_WRITE (PCI_1_IO_BASE_ADDR, CONFIG_SYS_PCI1_IO_BASE >> 16);
+	GT_REG_WRITE (PCI_1I_O_ADDRESS_REMAP, CONFIG_SYS_PCI1_IO_BASE >> 16);
+	GT_REG_WRITE (PCI_1_IO_SIZE, (CONFIG_SYS_PCI1_IO_SIZE - 1) >> 16);
 
-	GT_REG_WRITE (PCI_1_MEMORY0_BASE_ADDR, CFG_PCI1_MEM_BASE >> 16);
-	GT_REG_WRITE (PCI_1MEMORY0_ADDRESS_REMAP, CFG_PCI1_MEM_BASE >> 16);
-	GT_REG_WRITE (PCI_1_MEMORY0_SIZE, (CFG_PCI1_MEM_SIZE - 1) >> 16);
+	GT_REG_WRITE (PCI_1_MEMORY0_BASE_ADDR, CONFIG_SYS_PCI1_MEM_BASE >> 16);
+	GT_REG_WRITE (PCI_1MEMORY0_ADDRESS_REMAP, CONFIG_SYS_PCI1_MEM_BASE >> 16);
+	GT_REG_WRITE (PCI_1_MEMORY0_SIZE, (CONFIG_SYS_PCI1_MEM_SIZE - 1) >> 16);
 
 	/* PCI interface settings */
 	/* Timeout set to retry forever */
@@ -183,7 +184,7 @@ static void gt_pci_config (void)
 	for (stat = 0; stat <= PCI_HOST1; stat++)
 		pciWriteConfigReg (stat,
 				   PCI_INTERNAL_REGISTERS_MEMORY_MAPPED_BASE_ADDRESS,
-				   SELF, CFG_GT_REGS);
+				   SELF, CONFIG_SYS_GT_REGS);
 #endif
 
 }
@@ -199,7 +200,7 @@ static void gt_cpu_config (void)
 	tmp = GTREGREAD (CPU_CONFIGURATION);
 
 	/* set the SINGLE_CPU bit  see MV64460 P.399 */
-#ifndef CFG_GT_DUAL_CPU		/* SINGLE_CPU seems to cause JTAG problems */
+#ifndef CONFIG_SYS_GT_DUAL_CPU		/* SINGLE_CPU seems to cause JTAG problems */
 	tmp |= CPU_CONF_SINGLE_CPU;
 #endif
 
@@ -250,7 +251,7 @@ int board_early_init_f (void)
 	 * it last time. (huber)
 	 */
 
-	my_remap_gt_regs (CFG_DFL_GT_REGS, CFG_GT_REGS);
+	my_remap_gt_regs (CONFIG_SYS_DFL_GT_REGS, CONFIG_SYS_GT_REGS);
 
 	/* No PCI in first release of Port To_do: enable it. */
 #ifdef CONFIG_PCI
@@ -296,56 +297,56 @@ int board_early_init_f (void)
 	 * on-board sram on the eval board, and updates the correct
 	 * registers to boot from the sram. (device0)
 	 */
-	if (memoryGetDeviceBaseAddress (DEVICE0) == CFG_DFL_BOOTCS_BASE)
+	if (memoryGetDeviceBaseAddress (DEVICE0) == CONFIG_SYS_DFL_BOOTCS_BASE)
 		sram_boot = 1;
 	if (!sram_boot)
-		memoryMapDeviceSpace (DEVICE0, CFG_DEV0_SPACE, CFG_DEV0_SIZE);
+		memoryMapDeviceSpace (DEVICE0, CONFIG_SYS_DEV0_SPACE, CONFIG_SYS_DEV0_SIZE);
 
-	memoryMapDeviceSpace (DEVICE1, CFG_DEV1_SPACE, CFG_DEV1_SIZE);
-	memoryMapDeviceSpace (DEVICE2, CFG_DEV2_SPACE, CFG_DEV2_SIZE);
-	memoryMapDeviceSpace (DEVICE3, CFG_DEV3_SPACE, CFG_DEV3_SIZE);
+	memoryMapDeviceSpace (DEVICE1, CONFIG_SYS_DEV1_SPACE, CONFIG_SYS_DEV1_SIZE);
+	memoryMapDeviceSpace (DEVICE2, CONFIG_SYS_DEV2_SPACE, CONFIG_SYS_DEV2_SIZE);
+	memoryMapDeviceSpace (DEVICE3, CONFIG_SYS_DEV3_SPACE, CONFIG_SYS_DEV3_SIZE);
 
 
 	/* configure device timing */
-#ifdef CFG_DEV0_PAR		/* set port parameters for SRAM device module access */
+#ifdef CONFIG_SYS_DEV0_PAR		/* set port parameters for SRAM device module access */
 	if (!sram_boot)
-		GT_REG_WRITE (DEVICE_BANK0PARAMETERS, CFG_DEV0_PAR);
+		GT_REG_WRITE (DEVICE_BANK0PARAMETERS, CONFIG_SYS_DEV0_PAR);
 #endif
 
-#ifdef CFG_DEV1_PAR		/* set port parameters for RTC device module access */
-	GT_REG_WRITE (DEVICE_BANK1PARAMETERS, CFG_DEV1_PAR);
+#ifdef CONFIG_SYS_DEV1_PAR		/* set port parameters for RTC device module access */
+	GT_REG_WRITE (DEVICE_BANK1PARAMETERS, CONFIG_SYS_DEV1_PAR);
 #endif
-#ifdef CFG_DEV2_PAR		/* set port parameters for DUART device module access */
-	GT_REG_WRITE (DEVICE_BANK2PARAMETERS, CFG_DEV2_PAR);
+#ifdef CONFIG_SYS_DEV2_PAR		/* set port parameters for DUART device module access */
+	GT_REG_WRITE (DEVICE_BANK2PARAMETERS, CONFIG_SYS_DEV2_PAR);
 #endif
 
-#ifdef CFG_32BIT_BOOT_PAR	/* set port parameters for Flash device module access */
+#ifdef CONFIG_SYS_32BIT_BOOT_PAR	/* set port parameters for Flash device module access */
 	/* detect if we are booting from the 32 bit flash */
 	if (GTREGREAD (DEVICE_BOOT_BANK_PARAMETERS) & (0x3 << 20)) {
 		/* 32 bit boot flash */
-		GT_REG_WRITE (DEVICE_BANK3PARAMETERS, CFG_8BIT_BOOT_PAR);
+		GT_REG_WRITE (DEVICE_BANK3PARAMETERS, CONFIG_SYS_8BIT_BOOT_PAR);
 		GT_REG_WRITE (DEVICE_BOOT_BANK_PARAMETERS,
-			      CFG_32BIT_BOOT_PAR);
+			      CONFIG_SYS_32BIT_BOOT_PAR);
 	} else {
 		/* 8 bit boot flash */
-		GT_REG_WRITE (DEVICE_BANK3PARAMETERS, CFG_32BIT_BOOT_PAR);
-		GT_REG_WRITE (DEVICE_BOOT_BANK_PARAMETERS, CFG_8BIT_BOOT_PAR);
+		GT_REG_WRITE (DEVICE_BANK3PARAMETERS, CONFIG_SYS_32BIT_BOOT_PAR);
+		GT_REG_WRITE (DEVICE_BOOT_BANK_PARAMETERS, CONFIG_SYS_8BIT_BOOT_PAR);
 	}
 #else
 	/* 8 bit boot flash only */
-/*	GT_REG_WRITE(DEVICE_BOOT_BANK_PARAMETERS, CFG_8BIT_BOOT_PAR);*/
+/*	GT_REG_WRITE(DEVICE_BOOT_BANK_PARAMETERS, CONFIG_SYS_8BIT_BOOT_PAR);*/
 #endif
 
 
 	gt_cpu_config ();
 
 	/* MPP setup */
-	GT_REG_WRITE (MPP_CONTROL0, CFG_MPP_CONTROL_0);
-	GT_REG_WRITE (MPP_CONTROL1, CFG_MPP_CONTROL_1);
-	GT_REG_WRITE (MPP_CONTROL2, CFG_MPP_CONTROL_2);
-	GT_REG_WRITE (MPP_CONTROL3, CFG_MPP_CONTROL_3);
+	GT_REG_WRITE (MPP_CONTROL0, CONFIG_SYS_MPP_CONTROL_0);
+	GT_REG_WRITE (MPP_CONTROL1, CONFIG_SYS_MPP_CONTROL_1);
+	GT_REG_WRITE (MPP_CONTROL2, CONFIG_SYS_MPP_CONTROL_2);
+	GT_REG_WRITE (MPP_CONTROL3, CONFIG_SYS_MPP_CONTROL_3);
 
-	GT_REG_WRITE (GPP_LEVEL_CONTROL, CFG_GPP_LEVEL_CONTROL);
+	GT_REG_WRITE (GPP_LEVEL_CONTROL, CONFIG_SYS_GPP_LEVEL_CONTROL);
 	DEBUG_LED0_ON ();
 	DEBUG_LED1_ON ();
 	DEBUG_LED2_ON ();
@@ -358,7 +359,7 @@ int board_early_init_f (void)
 int misc_init_r ()
 {
 	icache_enable ();
-#ifdef CFG_L2
+#ifdef CONFIG_SYS_L2
 	l2cache_enable ();
 #endif
 #ifdef CONFIG_MPSC
@@ -379,9 +380,9 @@ void after_reloc (ulong dest_addr, gd_t * gd)
 	/* check to see if we booted from the sram.  If so, move things
 	 * back to the way they should be. (we're running from main
 	 * memory at this point now */
-	if (memoryGetDeviceBaseAddress (DEVICE0) == CFG_DFL_BOOTCS_BASE) {
-		memoryMapDeviceSpace (DEVICE0, CFG_DEV0_SPACE, CFG_DEV0_SIZE);
-		memoryMapDeviceSpace (BOOT_DEVICE, CFG_DFL_BOOTCS_BASE, _8M);
+	if (memoryGetDeviceBaseAddress (DEVICE0) == CONFIG_SYS_DFL_BOOTCS_BASE) {
+		memoryMapDeviceSpace (DEVICE0, CONFIG_SYS_DEV0_SPACE, CONFIG_SYS_DEV0_SIZE);
+		memoryMapDeviceSpace (BOOT_DEVICE, CONFIG_SYS_DFL_BOOTCS_BASE, _8M);
 	}
 	display_mem_map ();
 	/* now, jump to the main ppcboot board init code */
@@ -401,7 +402,7 @@ int checkboard (void)
 {
 	int l_type = 0;
 
-	printf ("BOARD: %s\n", CFG_BOARD_NAME);
+	printf ("BOARD: %s\n", CONFIG_SYS_BOARD_NAME);
 	return (l_type);
 }
 
@@ -414,34 +415,34 @@ void debug_led (int led, int mode)
 	if (mode == 1) {
 		switch (led) {
 		case 0:
-			addr = (int *) ((unsigned int) CFG_DEV1_SPACE |
+			addr = (int *) ((unsigned int) CONFIG_SYS_DEV1_SPACE |
 					0x08000);
 			break;
 
 		case 1:
-			addr = (int *) ((unsigned int) CFG_DEV1_SPACE |
+			addr = (int *) ((unsigned int) CONFIG_SYS_DEV1_SPACE |
 					0x0c000);
 			break;
 
 		case 2:
-			addr = (int *) ((unsigned int) CFG_DEV1_SPACE |
+			addr = (int *) ((unsigned int) CONFIG_SYS_DEV1_SPACE |
 					0x10000);
 			break;
 		}
 	} else if (mode == 0) {
 		switch (led) {
 		case 0:
-			addr = (int *) ((unsigned int) CFG_DEV1_SPACE |
+			addr = (int *) ((unsigned int) CONFIG_SYS_DEV1_SPACE |
 					0x14000);
 			break;
 
 		case 1:
-			addr = (int *) ((unsigned int) CFG_DEV1_SPACE |
+			addr = (int *) ((unsigned int) CONFIG_SYS_DEV1_SPACE |
 					0x18000);
 			break;
 
 		case 2:
-			addr = (int *) ((unsigned int) CFG_DEV1_SPACE |
+			addr = (int *) ((unsigned int) CONFIG_SYS_DEV1_SPACE |
 					0x1c000);
 			break;
 		}
@@ -512,7 +513,7 @@ int display_mem_map (void)
 
 /* DRAM check routines copied from gw8260 */
 
-#if defined (CFG_DRAM_TEST)
+#if defined (CONFIG_SYS_DRAM_TEST)
 
 /*********************************************************************/
 /* NAME:  move64() -  moves a double word (64-bit)		     */
@@ -543,7 +544,7 @@ static void move64 (unsigned long long *src, unsigned long long *dest)
 }
 
 
-#if defined (CFG_DRAM_TEST_DATA)
+#if defined (CONFIG_SYS_DRAM_TEST_DATA)
 
 unsigned long long pattern[] = {
 	0xaaaaaaaaaaaaaaaaULL,
@@ -606,7 +607,7 @@ unsigned long long pattern[] = {
 /*********************************************************************/
 int mem_test_data (void)
 {
-	unsigned long long *pmem = (unsigned long long *) CFG_MEMTEST_START;
+	unsigned long long *pmem = (unsigned long long *) CONFIG_SYS_MEMTEST_START;
 	unsigned long long temp64 = 0;
 	int num_patterns = sizeof (pattern) / sizeof (pattern[0]);
 	int i;
@@ -633,9 +634,9 @@ int mem_test_data (void)
 
 	return 0;
 }
-#endif /* CFG_DRAM_TEST_DATA */
+#endif /* CONFIG_SYS_DRAM_TEST_DATA */
 
-#if defined (CFG_DRAM_TEST_ADDRESS)
+#if defined (CONFIG_SYS_DRAM_TEST_ADDRESS)
 /*********************************************************************/
 /* NAME:  mem_test_address() -	test address lines		     */
 /*								     */
@@ -660,8 +661,8 @@ int mem_test_data (void)
 int mem_test_address (void)
 {
 	volatile unsigned int *pmem =
-		(volatile unsigned int *) CFG_MEMTEST_START;
-	const unsigned int size = (CFG_MEMTEST_END - CFG_MEMTEST_START) / 4;
+		(volatile unsigned int *) CONFIG_SYS_MEMTEST_START;
+	const unsigned int size = (CONFIG_SYS_MEMTEST_END - CONFIG_SYS_MEMTEST_START) / 4;
 	unsigned int i;
 
 	/* write address to each location */
@@ -678,9 +679,9 @@ int mem_test_address (void)
 	}
 	return 0;
 }
-#endif /* CFG_DRAM_TEST_ADDRESS */
+#endif /* CONFIG_SYS_DRAM_TEST_ADDRESS */
 
-#if defined (CFG_DRAM_TEST_WALK)
+#if defined (CONFIG_SYS_DRAM_TEST_WALK)
 /*********************************************************************/
 /* NAME:   mem_march() -  memory march				     */
 /*								     */
@@ -738,7 +739,7 @@ int mem_march (volatile unsigned long long *base,
 	}
 	return 0;
 }
-#endif /* CFG_DRAM_TEST_WALK */
+#endif /* CONFIG_SYS_DRAM_TEST_WALK */
 
 /*********************************************************************/
 /* NAME:   mem_test_walk() -  a simple walking ones test	     */
@@ -770,8 +771,8 @@ int mem_test_walk (void)
 {
 	unsigned long long mask;
 	volatile unsigned long long *pmem =
-		(volatile unsigned long long *) CFG_MEMTEST_START;
-	const unsigned long size = (CFG_MEMTEST_END - CFG_MEMTEST_START) / 8;
+		(volatile unsigned long long *) CONFIG_SYS_MEMTEST_START;
+	const unsigned long size = (CONFIG_SYS_MEMTEST_END - CONFIG_SYS_MEMTEST_START) / 8;
 
 	unsigned int i;
 
@@ -847,9 +848,9 @@ int testdram (void)
 /*    runwalk = 0; */
 
 	if ((rundata == 1) || (runaddress == 1) || (runwalk == 1)) {
-		printf ("Testing RAM from 0x%08x to 0x%08x ...  (don't panic... that will take a moment !!!!)\n", CFG_MEMTEST_START, CFG_MEMTEST_END);
+		printf ("Testing RAM from 0x%08x to 0x%08x ...  (don't panic... that will take a moment !!!!)\n", CONFIG_SYS_MEMTEST_START, CONFIG_SYS_MEMTEST_END);
 	}
-#ifdef CFG_DRAM_TEST_DATA
+#ifdef CONFIG_SYS_DRAM_TEST_DATA
 	if (rundata == 1) {
 		printf ("Test DATA ...  ");
 		if (mem_test_data () == 1) {
@@ -859,7 +860,7 @@ int testdram (void)
 			printf ("ok \n");
 	}
 #endif
-#ifdef CFG_DRAM_TEST_ADDRESS
+#ifdef CONFIG_SYS_DRAM_TEST_ADDRESS
 	if (runaddress == 1) {
 		printf ("Test ADDRESS ...  ");
 		if (mem_test_address () == 1) {
@@ -869,7 +870,7 @@ int testdram (void)
 			printf ("ok \n");
 	}
 #endif
-#ifdef CFG_DRAM_TEST_WALK
+#ifdef CONFIG_SYS_DRAM_TEST_WALK
 	if (runwalk == 1) {
 		printf ("Test WALKING ONEs ...  ");
 		if (mem_test_walk () == 1) {
@@ -885,7 +886,7 @@ int testdram (void)
 	return 0;
 
 }
-#endif /* CFG_DRAM_TEST */
+#endif /* CONFIG_SYS_DRAM_TEST */
 
 /* ronen - the below functions are used by the bootm function           */
 /*  - we map the base register to fbe00000 (same mapping as in the LSP) */
@@ -924,8 +925,13 @@ void board_prebootm_init ()
 	GT_REG_WRITE (MV64460_ETH_RECEIVE_QUEUE_COMMAND_REG (2), 0x0000ff00);
 
 /* Relocate MV64460 internal regs */
-	my_remap_gt_regs_bootm (CFG_GT_REGS, BRIDGE_REG_BASE_BOOTM);
+	my_remap_gt_regs_bootm (CONFIG_SYS_GT_REGS, BRIDGE_REG_BASE_BOOTM);
 
 	icache_disable ();
 	dcache_disable ();
 }
+
+int board_eth_init(bd_t *bis)
+{
+	return pci_eth_init(bis);
+}
diff --git a/board/Marvell/db64460/mpsc.c b/board/Marvell/db64460/mpsc.c
index 359b83140..303a63615 100644
--- a/board/Marvell/db64460/mpsc.c
+++ b/board/Marvell/db64460/mpsc.c
@@ -426,7 +426,7 @@ void mpsc_sdma_init (void)
 			  (MV64460_CUNIT_BASE_ADDR_WIN_0_BIT * 2)));
 
 /* Setup MPSC internal address space base address	*/
-	GT_REG_WRITE (CUNIT_INTERNAL_SPACE_BASE_ADDR_REG, CFG_GT_REGS);
+	GT_REG_WRITE (CUNIT_INTERNAL_SPACE_BASE_ADDR_REG, CONFIG_SYS_GT_REGS);
 
 /* no high address remap*/
 	GT_REG_WRITE (CUNIT_HIGH_ADDR_REMAP_REG0, 0x00);
@@ -516,9 +516,9 @@ int galbrg_set_baudrate (int channel, int rate)
 
 #ifdef ZUMA_NTL
 	/* from tclk */
-	clock = (CFG_TCLK / (16 * rate)) - 1;
+	clock = (CONFIG_SYS_TCLK / (16 * rate)) - 1;
 #else
-	clock = (CFG_TCLK / (16 * rate)) - 1;
+	clock = (CONFIG_SYS_TCLK / (16 * rate)) - 1;
 #endif
 
 	galbrg_set_CDV (channel, clock);	/* set timer Reg. for BRG */
diff --git a/board/Marvell/db64460/pci.c b/board/Marvell/db64460/pci.c
index 563728412..499809514 100644
--- a/board/Marvell/db64460/pci.c
+++ b/board/Marvell/db64460/pci.c
@@ -52,13 +52,13 @@ static void gt_pci_bus_mode_display (PCI_HOST host)
 		printf ("PCI %d bus mode: Conventional PCI\n", host);
 		break;
 	case 1:
-		printf ("PCI %d bus mode: 66 Mhz PCIX\n", host);
+		printf ("PCI %d bus mode: 66 MHz PCIX\n", host);
 		break;
 	case 2:
-		printf ("PCI %d bus mode: 100 Mhz PCIX\n", host);
+		printf ("PCI %d bus mode: 100 MHz PCIX\n", host);
 		break;
 	case 3:
-		printf ("PCI %d bus mode: 133 Mhz PCIX\n", host);
+		printf ("PCI %d bus mode: 133 MHz PCIX\n", host);
 		break;
 	default:
 		printf ("Unknown BUS %d\n", mode);
@@ -859,14 +859,14 @@ void pci_init_board (void)
 
 	/* PCI memory space */
 	pci_set_region (pci0_hose.regions + 0,
-			CFG_PCI0_0_MEM_SPACE,
-			CFG_PCI0_0_MEM_SPACE,
-			CFG_PCI0_MEM_SIZE, PCI_REGION_MEM);
+			CONFIG_SYS_PCI0_0_MEM_SPACE,
+			CONFIG_SYS_PCI0_0_MEM_SPACE,
+			CONFIG_SYS_PCI0_MEM_SIZE, PCI_REGION_MEM);
 
 	/* PCI I/O space */
 	pci_set_region (pci0_hose.regions + 1,
-			CFG_PCI0_IO_SPACE_PCI,
-			CFG_PCI0_IO_SPACE, CFG_PCI0_IO_SIZE, PCI_REGION_IO);
+			CONFIG_SYS_PCI0_IO_SPACE_PCI,
+			CONFIG_SYS_PCI0_IO_SPACE, CONFIG_SYS_PCI0_IO_SIZE, PCI_REGION_IO);
 
 	pci_set_ops (&pci0_hose,
 		     pci_hose_read_config_byte_via_dword,
@@ -901,14 +901,14 @@ void pci_init_board (void)
 
 	/* PCI memory space */
 	pci_set_region (pci1_hose.regions + 0,
-			CFG_PCI1_0_MEM_SPACE,
-			CFG_PCI1_0_MEM_SPACE,
-			CFG_PCI1_MEM_SIZE, PCI_REGION_MEM);
+			CONFIG_SYS_PCI1_0_MEM_SPACE,
+			CONFIG_SYS_PCI1_0_MEM_SPACE,
+			CONFIG_SYS_PCI1_MEM_SIZE, PCI_REGION_MEM);
 
 	/* PCI I/O space */
 	pci_set_region (pci1_hose.regions + 1,
-			CFG_PCI1_IO_SPACE_PCI,
-			CFG_PCI1_IO_SPACE, CFG_PCI1_IO_SIZE, PCI_REGION_IO);
+			CONFIG_SYS_PCI1_IO_SPACE_PCI,
+			CONFIG_SYS_PCI1_IO_SPACE, CONFIG_SYS_PCI1_IO_SIZE, PCI_REGION_IO);
 
 	pci_set_ops (&pci1_hose,
 		     pci_hose_read_config_byte_via_dword,
diff --git a/board/Marvell/db64460/sdram_init.c b/board/Marvell/db64460/sdram_init.c
index f36f3484a..6d6b12644 100644
--- a/board/Marvell/db64460/sdram_init.c
+++ b/board/Marvell/db64460/sdram_init.c
@@ -312,7 +312,7 @@ return 0;
 	} else
 		dimmInfo->slot = slot;	/* start to fill up dimminfo for this "slot" */
 
-#ifdef CFG_DISPLAY_DIMM_SPD_CONTENT
+#ifdef CONFIG_SYS_DISPLAY_DIMM_SPD_CONTENT
 
 	for (i = 0; i <= 127; i++) {
 		printf ("SPD-EEPROM Byte %3d = %3x (%3d)\n", i, data[i],
@@ -690,16 +690,16 @@ return 0;
 						if ((dimmInfo->
 						     minimumCycleTimeAtMaxCasLatancy_LoP
 						     <
-						     CFG_DDR_SDRAM_CYCLE_COUNT_LOP)
+						     CONFIG_SYS_DDR_SDRAM_CYCLE_COUNT_LOP)
 						    ||
 						    ((dimmInfo->
 						      minimumCycleTimeAtMaxCasLatancy_LoP
 						      ==
-						      CFG_DDR_SDRAM_CYCLE_COUNT_LOP)
+						      CONFIG_SYS_DDR_SDRAM_CYCLE_COUNT_LOP)
 						     && (dimmInfo->
 							 minimumCycleTimeAtMaxCasLatancy_RoP
 							 <
-							 CFG_DDR_SDRAM_CYCLE_COUNT_ROP)))
+							 CONFIG_SYS_DDR_SDRAM_CYCLE_COUNT_ROP)))
 						{
 							dimmInfo->
 								maxClSupported_DDR
@@ -714,16 +714,16 @@ return 0;
 						if ((dimmInfo->
 						     minimumCycleTimeAtMaxCasLatancy_LoP
 						     >
-						     CFG_DDR_SDRAM_CYCLE_COUNT_LOP)
+						     CONFIG_SYS_DDR_SDRAM_CYCLE_COUNT_LOP)
 						    ||
 						    ((dimmInfo->
 						      minimumCycleTimeAtMaxCasLatancy_LoP
 						      ==
-						      CFG_DDR_SDRAM_CYCLE_COUNT_LOP)
+						      CONFIG_SYS_DDR_SDRAM_CYCLE_COUNT_LOP)
 						     && (dimmInfo->
 							 minimumCycleTimeAtMaxCasLatancy_RoP
 							 >
-							 CFG_DDR_SDRAM_CYCLE_COUNT_ROP)))
+							 CONFIG_SYS_DDR_SDRAM_CYCLE_COUNT_ROP)))
 						{
 							printf ("*********************************************************\n");
 							printf ("*** sysClock is higher than SDRAM's allowed frequency ***\n");
@@ -1289,37 +1289,37 @@ int setup_sdram (AUX_MEM_DIMM_INFO * info)
 	case 0x0:
 	case 0x80:		/* refresh period is 15.625 usec */
 		sdram_config_reg =
-			(unsigned int) (((float) 15.625 * (float) CFG_BUS_HZ)
+			(unsigned int) (((float) 15.625 * (float) CONFIG_SYS_BUS_HZ)
 					/ (float) 1000000.0);
 		break;
 	case 0x1:
 	case 0x81:		/* refresh period is 3.9 usec */
 		sdram_config_reg =
-			(unsigned int) (((float) 3.9 * (float) CFG_BUS_HZ) /
+			(unsigned int) (((float) 3.9 * (float) CONFIG_SYS_BUS_HZ) /
 					(float) 1000000.0);
 		break;
 	case 0x2:
 	case 0x82:		/* refresh period is 7.8 usec */
 		sdram_config_reg =
-			(unsigned int) (((float) 7.8 * (float) CFG_BUS_HZ) /
+			(unsigned int) (((float) 7.8 * (float) CONFIG_SYS_BUS_HZ) /
 					(float) 1000000.0);
 		break;
 	case 0x3:
 	case 0x83:		/* refresh period is 31.3 usec */
 		sdram_config_reg =
-			(unsigned int) (((float) 31.3 * (float) CFG_BUS_HZ) /
+			(unsigned int) (((float) 31.3 * (float) CONFIG_SYS_BUS_HZ) /
 					(float) 1000000.0);
 		break;
 	case 0x4:
 	case 0x84:		/* refresh period is 62.5 usec */
 		sdram_config_reg =
-			(unsigned int) (((float) 62.5 * (float) CFG_BUS_HZ) /
+			(unsigned int) (((float) 62.5 * (float) CONFIG_SYS_BUS_HZ) /
 					(float) 1000000.0);
 		break;
 	case 0x5:
 	case 0x85:		/* refresh period is 125 usec */
 		sdram_config_reg =
-			(unsigned int) (((float) 125 * (float) CFG_BUS_HZ) /
+			(unsigned int) (((float) 125 * (float) CONFIG_SYS_BUS_HZ) /
 					(float) 1000000.0);
 		break;
 	default:		/* refresh period undefined */
@@ -1816,7 +1816,7 @@ phys_size_t initdram (int board_type)
 
 	printf ("-- DIMM2 has %d banks\n", dimmInfo2.numOfModuleBanks);
 
-	for (bank_no = 0; bank_no < CFG_DRAM_BANKS; bank_no++) {
+	for (bank_no = 0; bank_no < CONFIG_SYS_DRAM_BANKS; bank_no++) {
 		/* skip over banks that are not populated */
 		if (!checkbank[bank_no])
 			continue;
diff --git a/board/Marvell/db64460/u-boot.lds b/board/Marvell/db64460/u-boot.lds
index 1a95755ab..ff2d8b7fe 100644
--- a/board/Marvell/db64460/u-boot.lds
+++ b/board/Marvell/db64460/u-boot.lds
@@ -60,7 +60,7 @@ SECTIONS
 
 /* store the environment in a seperate sector in the boot flash */
 /*    . = env_offset; */
-/*    common/environment.o(.text) */
+/*    common/env_embedded.o(.text) */
 
     *(.text)
     *(.fixup)
@@ -131,6 +131,7 @@ SECTIONS
    *(.dynbss)
    *(.bss)
    *(COMMON)
+   . = ALIGN(4);
   }
   _end = . ;
   PROVIDE (end = .);
diff --git a/board/RPXClassic/RPXClassic.c b/board/RPXClassic/RPXClassic.c
index 804635a4a..9fdf700ff 100644
--- a/board/RPXClassic/RPXClassic.c
+++ b/board/RPXClassic/RPXClassic.c
@@ -111,7 +111,7 @@ void board_get_enetaddr (uchar * enet)
 	char buff[256], *cp;
 
 	/* Initialize I2C					*/
-	i2c_init (CFG_I2C_SPEED, CFG_I2C_SLAVE);
+	i2c_init (CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
 
 	/* Read 256 bytes in EEPROM				*/
 	i2c_read (0x54, 0, 1, (uchar *)buff, 128);
@@ -167,7 +167,7 @@ void rpxclassic_init (void)
 
 phys_size_t initdram (int board_type)
 {
-	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
 	volatile memctl8xx_t *memctl = &immap->im_memctl;
 	long int size10;
 
@@ -175,15 +175,15 @@ phys_size_t initdram (int board_type)
 			   sizeof (sdram_table) / sizeof (uint));
 
 	/* Refresh clock prescalar */
-	memctl->memc_mptpr = CFG_MPTPR;
+	memctl->memc_mptpr = CONFIG_SYS_MPTPR;
 
 	memctl->memc_mar = 0x00000000;
 
 	/* Map controller banks 1 to the SDRAM bank */
-	memctl->memc_or1 = CFG_OR1_PRELIM;
-	memctl->memc_br1 = CFG_BR1_PRELIM;
+	memctl->memc_or1 = CONFIG_SYS_OR1_PRELIM;
+	memctl->memc_br1 = CONFIG_SYS_BR1_PRELIM;
 
-	memctl->memc_mamr = CFG_MAMR_10COL & (~(MAMR_PTAE));	/* no refresh yet */
+	memctl->memc_mamr = CONFIG_SYS_MAMR_10COL & (~(MAMR_PTAE));	/* no refresh yet */
 
 	udelay (200);
 
@@ -200,7 +200,7 @@ phys_size_t initdram (int board_type)
 	 * try 10 column mode
 	 */
 
-	size10 = dram_size (CFG_MAMR_10COL, SDRAM_BASE_PRELIM,
+	size10 = dram_size (CONFIG_SYS_MAMR_10COL, SDRAM_BASE_PRELIM,
 						SDRAM_MAX_SIZE);
 
 	return (size10);
@@ -218,7 +218,7 @@ phys_size_t initdram (int board_type)
 
 static long int dram_size (long int mamr_value, long int *base, long int maxsize)
 {
-	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
 	volatile memctl8xx_t *memctl = &immap->im_memctl;
 
 	memctl->memc_mamr = mamr_value;
diff --git a/board/RPXClassic/eccx.c b/board/RPXClassic/eccx.c
index cc76bbdfa..e1f3f9d07 100644
--- a/board/RPXClassic/eccx.c
+++ b/board/RPXClassic/eccx.c
@@ -299,7 +299,7 @@ void video_get_info_str (int line_number, char *info)
  */
 unsigned int board_video_init (void)
 {
-    volatile immap_t     *immap  = (immap_t *)CFG_IMMR;
+    volatile immap_t     *immap  = (immap_t *)CONFIG_SYS_IMMR;
     volatile memctl8xx_t *memctl = &immap->im_memctl;
 
     /* Program ECCX registers                                                */
diff --git a/board/RPXClassic/flash.c b/board/RPXClassic/flash.c
index 2e0b8f958..f07d96052 100644
--- a/board/RPXClassic/flash.c
+++ b/board/RPXClassic/flash.c
@@ -33,7 +33,7 @@
 #include <common.h>
 #include <mpc8xx.h>
 
-flash_info_t	flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips	*/
+flash_info_t	flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips	*/
 
 /*-----------------------------------------------------------------------
  * Functions
@@ -51,20 +51,20 @@ unsigned long flash_init (void)
 	int i;
 
 	/* Init: no FLASHes known */
-	for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) {
+	for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
 		flash_info[i].flash_id = FLASH_UNKNOWN;
 	}
 
-	size_b0 = flash_get_size((vu_long *)CFG_FLASH_BASE, &flash_info[0]);
+	size_b0 = flash_get_size((vu_long *)CONFIG_SYS_FLASH_BASE, &flash_info[0]);
 
 
-	flash_get_offsets (CFG_FLASH_BASE, &flash_info[0]);
+	flash_get_offsets (CONFIG_SYS_FLASH_BASE, &flash_info[0]);
 
-#if CFG_MONITOR_BASE >= CFG_FLASH_BASE
+#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE
 	/* monitor protection ON by default */
 	flash_protect(FLAG_PROTECT_SET,
-		      CFG_MONITOR_BASE,
-		      CFG_MONITOR_BASE+monitor_flash_len-1,
+		      CONFIG_SYS_MONITOR_BASE,
+		      CONFIG_SYS_MONITOR_BASE+monitor_flash_len-1,
 		      &flash_info[0]);
 #endif
 
@@ -313,7 +313,7 @@ int	flash_erase (flash_info_t *info, int s_first, int s_last)
 	last  = start;
 	addr = (vu_long *)(info->start[l_sect]);
 	while ((addr[0] & 0x80808080) != 0x80808080) {
-		if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+		if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
 			printf ("Timeout\n");
 			return 1;
 		}
@@ -436,7 +436,7 @@ static int write_word (flash_info_t *info, ulong dest, ulong data)
 	/* data polling for D7 */
 	start = get_timer (0);
 	while ((*((vu_long *)dest) & 0x80808080) != (data & 0x80808080)) {
-		if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+		if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
 			return (1);
 		}
 	}
diff --git a/board/RPXClassic/u-boot.lds b/board/RPXClassic/u-boot.lds
index 1f9a191d4..55cb5eca3 100644
--- a/board/RPXClassic/u-boot.lds
+++ b/board/RPXClassic/u-boot.lds
@@ -64,7 +64,7 @@ SECTIONS
 /* XXX ?
     . = env_offset;
 */
-    common/environment.o(.text)
+    common/env_embedded.o(.text)
 
     *(.text)
     *(.fixup)
@@ -135,6 +135,7 @@ SECTIONS
    *(.dynbss)
    *(.bss)
    *(COMMON)
+   . = ALIGN(4);
   }
   _end = . ;
   PROVIDE (end = .);
diff --git a/board/RPXClassic/u-boot.lds.debug b/board/RPXClassic/u-boot.lds.debug
index c33581d25..ea8538900 100644
--- a/board/RPXClassic/u-boot.lds.debug
+++ b/board/RPXClassic/u-boot.lds.debug
@@ -61,7 +61,7 @@ SECTIONS
     lib_generic/crc32.o		(.text)
 
     . = env_offset;
-    common/environment.o(.text)
+    common/env_embedded.o(.text)
 
     *(.text)
     *(.fixup)
diff --git a/board/RPXlite/RPXlite.c b/board/RPXlite/RPXlite.c
index bca31e4c8..dca53a468 100644
--- a/board/RPXlite/RPXlite.c
+++ b/board/RPXlite/RPXlite.c
@@ -104,7 +104,7 @@ int checkboard (void)
 
 phys_size_t initdram (int board_type)
 {
-	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
 	volatile memctl8xx_t *memctl = &immap->im_memctl;
 	long int size10;
 
@@ -112,15 +112,15 @@ phys_size_t initdram (int board_type)
 		   sizeof (sdram_table) / sizeof (uint));
 
 	/* Refresh clock prescalar */
-	memctl->memc_mptpr = CFG_MPTPR;
+	memctl->memc_mptpr = CONFIG_SYS_MPTPR;
 
 	memctl->memc_mar = 0x00000000;
 
 	/* Map controller banks 1 to the SDRAM bank */
-	memctl->memc_or1 = CFG_OR1_PRELIM;
-	memctl->memc_br1 = CFG_BR1_PRELIM;
+	memctl->memc_or1 = CONFIG_SYS_OR1_PRELIM;
+	memctl->memc_br1 = CONFIG_SYS_BR1_PRELIM;
 
-	memctl->memc_mamr = CFG_MAMR_10COL & (~(MAMR_PTAE));	/* no refresh yet */
+	memctl->memc_mamr = CONFIG_SYS_MAMR_10COL & (~(MAMR_PTAE));	/* no refresh yet */
 
 	udelay (200);
 
@@ -137,7 +137,7 @@ phys_size_t initdram (int board_type)
 	 * try 10 column mode
 	 */
 
-	size10 = dram_size (CFG_MAMR_10COL, SDRAM_BASE_PRELIM,
+	size10 = dram_size (CONFIG_SYS_MAMR_10COL, SDRAM_BASE_PRELIM,
 			    SDRAM_MAX_SIZE);
 
 	return (size10);
@@ -156,7 +156,7 @@ phys_size_t initdram (int board_type)
 static long int dram_size (long int mamr_value, long int *base,
 			   long int maxsize)
 {
-	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
 	volatile memctl8xx_t *memctl = &immap->im_memctl;
 
 	memctl->memc_mamr = mamr_value;
diff --git a/board/RPXlite/flash.c b/board/RPXlite/flash.c
index 659d60a2d..788fcdf29 100644
--- a/board/RPXlite/flash.c
+++ b/board/RPXlite/flash.c
@@ -38,7 +38,7 @@
 #include <common.h>
 #include <mpc8xx.h>
 
-flash_info_t	flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips	*/
+flash_info_t	flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips	*/
 
 /*-----------------------------------------------------------------------
  * Functions
@@ -52,13 +52,13 @@ static void flash_get_offsets (ulong base, flash_info_t *info);
 
 unsigned long flash_init (void)
 {
-/*	volatile immap_t     *immap  = (immap_t *)CFG_IMMR; */
+/*	volatile immap_t     *immap  = (immap_t *)CONFIG_SYS_IMMR; */
 /*	volatile memctl8xx_t *memctl = &immap->im_memctl; */
 	unsigned long size_b0 ;
 	int i;
 
 	/* Init: no FLASHes known */
-	for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) {
+	for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
 		flash_info[i].flash_id = FLASH_UNKNOWN;
 	}
 
@@ -73,19 +73,19 @@ unsigned long flash_init (void)
 */
 	/* Remap FLASH according to real size */
 /*%%%
-	memctl->memc_or0 = CFG_OR_TIMING_FLASH | (-size_b0 & 0xFFFF8000);
-	memctl->memc_br0 = (CFG_FLASH_BASE & BR_BA_MSK) | BR_MS_GPCM | BR_V;
+	memctl->memc_or0 = CONFIG_SYS_OR_TIMING_FLASH | (-size_b0 & 0xFFFF8000);
+	memctl->memc_br0 = (CONFIG_SYS_FLASH_BASE & BR_BA_MSK) | BR_MS_GPCM | BR_V;
 %%%*/
 	/* Re-do sizing to get full correct info */
 
-	size_b0 = flash_get_size((vu_long *)CFG_FLASH_BASE, &flash_info[0]);
-	flash_get_offsets (CFG_FLASH_BASE, &flash_info[0]);
+	size_b0 = flash_get_size((vu_long *)CONFIG_SYS_FLASH_BASE, &flash_info[0]);
+	flash_get_offsets (CONFIG_SYS_FLASH_BASE, &flash_info[0]);
 
-#if CFG_MONITOR_BASE >= CFG_FLASH_BASE
+#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE
 	/* monitor protection ON by default */
 	flash_protect(FLAG_PROTECT_SET,
-		      CFG_MONITOR_BASE,
-		      CFG_MONITOR_BASE+monitor_flash_len-1,
+		      CONFIG_SYS_MONITOR_BASE,
+		      CONFIG_SYS_MONITOR_BASE+monitor_flash_len-1,
 		      &flash_info[0]);
 #endif
 
@@ -390,7 +390,7 @@ int	flash_erase (flash_info_t *info, int s_first, int s_last)
 	last  = start;
 	addr = (vu_long *)(info->start[l_sect]);
 	while ((addr[0] & 0x80808080) != 0x80808080) {
-		if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+		if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
 			printf ("Timeout\n");
 			return 1;
 		}
@@ -513,7 +513,7 @@ static int write_word (flash_info_t *info, ulong dest, ulong data)
 	/* data polling for D7 */
 	start = get_timer (0);
 	while ((*((vu_long *)dest) & 0x80808080) != (data & 0x80808080)) {
-		if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+		if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
 			return (1);
 		}
 	}
diff --git a/board/RPXlite/u-boot.lds b/board/RPXlite/u-boot.lds
index 1f9a191d4..55cb5eca3 100644
--- a/board/RPXlite/u-boot.lds
+++ b/board/RPXlite/u-boot.lds
@@ -64,7 +64,7 @@ SECTIONS
 /* XXX ?
     . = env_offset;
 */
-    common/environment.o(.text)
+    common/env_embedded.o(.text)
 
     *(.text)
     *(.fixup)
@@ -135,6 +135,7 @@ SECTIONS
    *(.dynbss)
    *(.bss)
    *(COMMON)
+   . = ALIGN(4);
   }
   _end = . ;
   PROVIDE (end = .);
diff --git a/board/RPXlite/u-boot.lds.debug b/board/RPXlite/u-boot.lds.debug
index c33581d25..ea8538900 100644
--- a/board/RPXlite/u-boot.lds.debug
+++ b/board/RPXlite/u-boot.lds.debug
@@ -61,7 +61,7 @@ SECTIONS
     lib_generic/crc32.o		(.text)
 
     . = env_offset;
-    common/environment.o(.text)
+    common/env_embedded.o(.text)
 
     *(.text)
     *(.fixup)
diff --git a/board/RPXlite_dw/README b/board/RPXlite_dw/README
index 28bcb318e..14296b2ab 100644
--- a/board/RPXlite_dw/README
+++ b/board/RPXlite_dw/README
@@ -21,7 +21,7 @@ make distclean
 make RPXlite_DW_64_config
 make all
 
-2. CFG_ENV_IS_IN_FLASH/CFG_ENV_IS_IN_NVRAM
+2. CONFIG_ENV_IS_IN_FLASH/CONFIG_ENV_IS_IN_NVRAM
 
 The default environment parameter is stored in FLASH because it is a common choice for
 environment parameter.So I make NVRAM as backup parameter storeage.The reason why I
diff --git a/board/RPXlite_dw/RPXlite_dw.c b/board/RPXlite_dw/RPXlite_dw.c
index d6fabf04e..364a3165c 100644
--- a/board/RPXlite_dw/RPXlite_dw.c
+++ b/board/RPXlite_dw/RPXlite_dw.c
@@ -106,22 +106,22 @@ int checkboard (void)
 
 phys_size_t initdram (int board_type)
 {
-	volatile immap_t     *immap  = (immap_t *)CFG_IMMR;
+	volatile immap_t     *immap  = (immap_t *)CONFIG_SYS_IMMR;
 	volatile memctl8xx_t *memctl = &immap->im_memctl;
 	long int size9;
 
 	upmconfig(UPMA, (uint *)sdram_table, sizeof(sdram_table)/sizeof(uint));
 
 	/* Refresh clock prescalar */
-	memctl->memc_mptpr = CFG_MPTPR ;
+	memctl->memc_mptpr = CONFIG_SYS_MPTPR ;
 
 	memctl->memc_mar  = 0x00000088;
 
 	/* Map controller banks 1 to the SDRAM bank */
-	memctl->memc_or1 = CFG_OR1_PRELIM;
-	memctl->memc_br1 = CFG_BR1_PRELIM;
+	memctl->memc_or1 = CONFIG_SYS_OR1_PRELIM;
+	memctl->memc_br1 = CONFIG_SYS_BR1_PRELIM;
 
-	memctl->memc_mamr = CFG_MAMR_9COL & (~(MAMR_PTAE)); /* no refresh yet */
+	memctl->memc_mamr = CONFIG_SYS_MAMR_9COL & (~(MAMR_PTAE)); /* no refresh yet */
 	/*Disable Periodic timer A. */
 
 	udelay(200);
@@ -142,13 +142,13 @@ phys_size_t initdram (int board_type)
 	  * try 9 column mode
 	  */
 
-	size9 = dram_size (CFG_MAMR_9COL, SDRAM_BASE_PRELIM, SDRAM_MAX_SIZE);
+	size9 = dram_size (CONFIG_SYS_MAMR_9COL, SDRAM_BASE_PRELIM, SDRAM_MAX_SIZE);
 
 	/*
 	 * Final mapping:
 	 */
 
-	memctl->memc_or1 = ((-size9) & 0xFFFF0000) | CFG_OR_TIMING_SDRAM;
+	memctl->memc_or1 = ((-size9) & 0xFFFF0000) | CONFIG_SYS_OR_TIMING_SDRAM;
 
 	udelay (1000);
 
@@ -171,7 +171,7 @@ void rpxlite_init (void)
 static long int dram_size (long int mamr_value, long int *base,
 			   long int maxsize)
 {
-	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
 	volatile memctl8xx_t *memctl = &immap->im_memctl;
 
 	memctl->memc_mamr = mamr_value;
diff --git a/board/RPXlite_dw/flash.c b/board/RPXlite_dw/flash.c
index 41cb036bb..91788af20 100644
--- a/board/RPXlite_dw/flash.c
+++ b/board/RPXlite_dw/flash.c
@@ -49,7 +49,7 @@
 #include <common.h>
 #include <mpc8xx.h>
 
-flash_info_t	flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips	*/
+flash_info_t	flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips	*/
 
 /*-----------------------------------------------------------------------
  * Functions   vu_long : volatile unsigned long IN include/common.h
@@ -64,22 +64,22 @@ unsigned long flash_init (void)
 	int i;
 
 	/* Init: no FLASHes known */
-	for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) {
+	for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
 		flash_info[i].flash_id = FLASH_UNKNOWN;
 	}
 
-	size_b0 = flash_get_size((vu_long *)CFG_FLASH_BASE, &flash_info[0]);
-	flash_get_offsets (CFG_FLASH_BASE, &flash_info[0]);
+	size_b0 = flash_get_size((vu_long *)CONFIG_SYS_FLASH_BASE, &flash_info[0]);
+	flash_get_offsets (CONFIG_SYS_FLASH_BASE, &flash_info[0]);
 
-#if CFG_MONITOR_BASE >= CFG_FLASH_BASE
+#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE
 	/* If Monitor is in the cope of FLASH,then
 	 * protect this area by default in case for
 	 * other occupation. [SAM] */
 
 	/* monitor protection ON by default */
 	flash_protect(FLAG_PROTECT_SET,
-		      CFG_MONITOR_BASE,
-		      CFG_MONITOR_BASE+CFG_MONITOR_LEN-1,
+		      CONFIG_SYS_MONITOR_BASE,
+		      CONFIG_SYS_MONITOR_BASE+CONFIG_SYS_MONITOR_LEN-1,
 		      &flash_info[0]);
 #endif
 	flash_info[0].size = size_b0;
@@ -360,7 +360,7 @@ int	flash_erase (flash_info_t *info, int s_first, int s_last)
 	last  = start;
 	addr = (vu_long *)(info->start[l_sect]);
 	while ((addr[0] & 0x80808080) != 0x80808080) {
-		if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+		if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
 			printf ("Timeout\n");
 			return 1;
 		}
@@ -482,7 +482,7 @@ static int write_word (flash_info_t *info, ulong dest, ulong data)
 	/* data polling for D7 */
 	start = get_timer (0);
 	while ((*((vu_long *)dest) & 0x80808080) != (data & 0x80808080)) {
-		if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+		if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
 			return (1);
 		}
 	}
diff --git a/board/RPXlite_dw/u-boot.lds b/board/RPXlite_dw/u-boot.lds
index 2ee12069d..8d178940e 100644
--- a/board/RPXlite_dw/u-boot.lds
+++ b/board/RPXlite_dw/u-boot.lds
@@ -64,7 +64,7 @@ SECTIONS
 /* XXX ?
     . = env_offset;
 */
-    common/environment.o(.text)
+    common/env_embedded.o(.text)
 
     *(.text)
     *(.fixup)
@@ -135,6 +135,7 @@ SECTIONS
    *(.dynbss)
    *(.bss)
    *(COMMON)
+   . = ALIGN(4);
   }
   _end = . ;
   PROVIDE (end = .);
diff --git a/board/RPXlite_dw/u-boot.lds.debug b/board/RPXlite_dw/u-boot.lds.debug
index f6d153763..0f6ae696d 100644
--- a/board/RPXlite_dw/u-boot.lds.debug
+++ b/board/RPXlite_dw/u-boot.lds.debug
@@ -61,7 +61,7 @@ SECTIONS
     lib_generic/crc32.o		(.text)
 
     . = env_offset;
-    common/environment.o(.text)
+    common/env_embedded.o(.text)
 
     *(.text)
     *(.fixup)
diff --git a/board/RRvision/RRvision.c b/board/RRvision/RRvision.c
index c0b772d72..9d016c59d 100644
--- a/board/RRvision/RRvision.c
+++ b/board/RRvision/RRvision.c
@@ -112,7 +112,7 @@ int checkboard (void)
 
 phys_size_t initdram (int board_type)
 {
-	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
 	volatile memctl8xx_t *memctl = &immap->im_memctl;
 	unsigned long reg;
 	long int size8, size9;
@@ -126,17 +126,17 @@ phys_size_t initdram (int board_type)
 	 * with two SDRAM banks or four cycles every 31.2 us with one
 	 * bank. It will be adjusted after memory sizing.
 	 */
-	memctl->memc_mptpr = CFG_MPTPR_2BK_8K;
+	memctl->memc_mptpr = CONFIG_SYS_MPTPR_2BK_8K;
 
 	memctl->memc_mar = 0x00000088;
 
 	/*
 	 * Map controller bank 1 the SDRAM bank 2 at physical address 0.
 	 */
-	memctl->memc_or1 = CFG_OR2_PRELIM;
-	memctl->memc_br1 = CFG_BR2_PRELIM;
+	memctl->memc_or1 = CONFIG_SYS_OR2_PRELIM;
+	memctl->memc_br1 = CONFIG_SYS_BR2_PRELIM;
 
-	memctl->memc_mamr = CFG_MAMR_8COL & (~(MAMR_PTAE));	/* no refresh yet */
+	memctl->memc_mamr = CONFIG_SYS_MAMR_8COL & (~(MAMR_PTAE));	/* no refresh yet */
 
 	udelay (200);
 
@@ -156,7 +156,7 @@ phys_size_t initdram (int board_type)
 	 *
 	 * try 8 column mode
 	 */
-	size8 = dram_size (CFG_MAMR_8COL,
+	size8 = dram_size (CONFIG_SYS_MAMR_8COL,
 			   SDRAM_BASE2_PRELIM,
 			   SDRAM_MAX_SIZE);
 
@@ -165,7 +165,7 @@ phys_size_t initdram (int board_type)
 	/*
 	 * try 9 column mode
 	 */
-	size9 = dram_size (CFG_MAMR_9COL,
+	size9 = dram_size (CONFIG_SYS_MAMR_9COL,
 			   SDRAM_BASE2_PRELIM,
 			   SDRAM_MAX_SIZE);
 
@@ -174,7 +174,7 @@ phys_size_t initdram (int board_type)
 /*		debug ("SDRAM Bank 0 in 9 column mode: %ld MB\n", size >> 20);	*/
 	} else {			/* back to 8 columns            */
 		size = size8;
-		memctl->memc_mamr = CFG_MAMR_8COL;
+		memctl->memc_mamr = CONFIG_SYS_MAMR_8COL;
 		udelay (500);
 /*		debug ("SDRAM Bank 0 in 8 column mode: %ld MB\n", size >> 20);	*/
 	}
@@ -187,15 +187,15 @@ phys_size_t initdram (int board_type)
 	 */
 	if (size < 0x02000000) {
 		/* reduce to 15.6 us (62.4 us / quad) */
-		memctl->memc_mptpr = CFG_MPTPR_2BK_4K;
+		memctl->memc_mptpr = CONFIG_SYS_MPTPR_2BK_4K;
 		udelay (1000);
 	}
 
 	/*
 	 * Final mapping
 	 */
-	memctl->memc_or1 = ((-size) & 0xFFFF0000) | CFG_OR_TIMING_SDRAM;
-	memctl->memc_br1 = (CFG_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V;
+	memctl->memc_or1 = ((-size) & 0xFFFF0000) | CONFIG_SYS_OR_TIMING_SDRAM;
+	memctl->memc_br1 = (CONFIG_SYS_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V;
 
 	/*
 	 * No bank 1
@@ -206,7 +206,7 @@ phys_size_t initdram (int board_type)
 
 	/* adjust refresh rate depending on SDRAM type, one bank */
 	reg = memctl->memc_mptpr;
-	reg >>= 1;			/* reduce to CFG_MPTPR_1BK_8K / _4K */
+	reg >>= 1;			/* reduce to CONFIG_SYS_MPTPR_1BK_8K / _4K */
 	memctl->memc_mptpr = reg;
 
 	udelay (10000);
@@ -227,7 +227,7 @@ phys_size_t initdram (int board_type)
 static long int dram_size (long int mamr_value, long int *base,
 						   long int maxsize)
 {
-	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
 	volatile memctl8xx_t *memctl = &immap->im_memctl;
 
 	memctl->memc_mamr = mamr_value;
diff --git a/board/RRvision/flash.c b/board/RRvision/flash.c
index d8e07e645..fdbe928fb 100644
--- a/board/RRvision/flash.c
+++ b/board/RRvision/flash.c
@@ -26,11 +26,11 @@
 #include <common.h>
 #include <mpc8xx.h>
 
-#ifndef	CFG_ENV_ADDR
-#define CFG_ENV_ADDR	(CFG_FLASH_BASE + CFG_ENV_OFFSET)
+#ifndef	CONFIG_ENV_ADDR
+#define CONFIG_ENV_ADDR	(CONFIG_SYS_FLASH_BASE + CONFIG_ENV_OFFSET)
 #endif
 
-flash_info_t	flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips	*/
+flash_info_t	flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips	*/
 
 /*-----------------------------------------------------------------------
  * Functions
@@ -43,13 +43,13 @@ static int write_word (flash_info_t *info, ulong dest, ulong data);
 
 unsigned long flash_init (void)
 {
-	volatile immap_t     *immap  = (immap_t *)CFG_IMMR;
+	volatile immap_t     *immap  = (immap_t *)CONFIG_SYS_IMMR;
 	volatile memctl8xx_t *memctl = &immap->im_memctl;
 	unsigned long size;
 	int i;
 
 	/* Init: no FLASHes known */
-	for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) {
+	for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
 		flash_info[i].flash_id = FLASH_UNKNOWN;
 	}
 
@@ -63,25 +63,25 @@ unsigned long flash_init (void)
 	}
 
 	/* Remap FLASH according to real size */
-	memctl->memc_or0 = CFG_OR_TIMING_FLASH | (-size & OR_AM_MSK);
-	memctl->memc_br0 = (CFG_FLASH_BASE & BR_BA_MSK) | BR_MS_GPCM | BR_V;
+	memctl->memc_or0 = CONFIG_SYS_OR_TIMING_FLASH | (-size & OR_AM_MSK);
+	memctl->memc_br0 = (CONFIG_SYS_FLASH_BASE & BR_BA_MSK) | BR_MS_GPCM | BR_V;
 
 	/* Re-do sizing to get full correct info */
-	size = flash_get_size((vu_long *)CFG_FLASH_BASE, &flash_info[0]);
+	size = flash_get_size((vu_long *)CONFIG_SYS_FLASH_BASE, &flash_info[0]);
 
-#if CFG_MONITOR_BASE >= CFG_FLASH_BASE
+#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE
 	/* monitor protection ON by default */
 	flash_protect(FLAG_PROTECT_SET,
-		      CFG_MONITOR_BASE,
-		      CFG_MONITOR_BASE+monitor_flash_len-1,
+		      CONFIG_SYS_MONITOR_BASE,
+		      CONFIG_SYS_MONITOR_BASE+monitor_flash_len-1,
 		      &flash_info[0]);
 #endif
 
-#ifdef	CFG_ENV_IS_IN_FLASH
+#ifdef	CONFIG_ENV_IS_IN_FLASH
 	/* ENV protection ON by default */
 	flash_protect(FLAG_PROTECT_SET,
-		      CFG_ENV_ADDR,
-		      CFG_ENV_ADDR+CFG_ENV_SIZE-1,
+		      CONFIG_ENV_ADDR,
+		      CONFIG_ENV_ADDR+CONFIG_ENV_SIZE-1,
 		      &flash_info[0]);
 #endif
 
@@ -388,7 +388,7 @@ int	flash_erase (flash_info_t *info, int s_first, int s_last)
 	last  = start;
 	addr = (vu_long*)(info->start[l_sect]);
 	while ((addr[0] & 0x00800080) != 0x00800080) {
-		if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+		if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
 			puts ("Timeout\n");
 			return 1;
 		}
@@ -511,7 +511,7 @@ static int write_word (flash_info_t *info, ulong dest, ulong data)
 	/* data polling for D7 */
 	start = get_timer (0);
 	while ((*((vu_long *)dest) & 0x00800080) != (data & 0x00800080)) {
-		if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+		if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
 			return (1);
 		}
 	}
diff --git a/board/RRvision/u-boot.lds b/board/RRvision/u-boot.lds
index 9e767ee40..9fd77f8c0 100644
--- a/board/RRvision/u-boot.lds
+++ b/board/RRvision/u-boot.lds
@@ -66,7 +66,7 @@ SECTIONS
     lib_ppc/time.o		(.text)
 
     . = env_offset;
-    common/environment.o	(.ppcenv)
+    common/env_embedded.o	(.ppcenv)
 
     *(.text)
     *(.fixup)
@@ -137,6 +137,7 @@ SECTIONS
    *(.dynbss)
    *(.bss)
    *(COMMON)
+   . = ALIGN(4);
   }
   _end = . ;
   PROVIDE (end = .);
diff --git a/board/a3000/a3000.c b/board/a3000/a3000.c
index c1eceaa2f..ce2cf28e3 100644
--- a/board/a3000/a3000.c
+++ b/board/a3000/a3000.c
@@ -27,6 +27,7 @@
 #include <common.h>
 #include <mpc824x.h>
 #include <pci.h>
+#include <netdev.h>
 
 int checkboard (void)
 {
@@ -45,7 +46,7 @@ phys_size_t initdram (int board_type)
 	long mear1;
 	long emear1;
 
-	size = get_ram_size(CFG_SDRAM_BASE, CFG_MAX_RAM_SIZE);
+	size = get_ram_size(CONFIG_SYS_SDRAM_BASE, CONFIG_SYS_MAX_RAM_SIZE);
 
 	new_bank0_end = size - 1;
 	mear1 = mpc824x_mpc107_getreg(MEAR1);
@@ -109,3 +110,8 @@ void pci_init_board(void)
 {
 	pci_mpc824x_init(&hose);
 }
+
+int board_eth_init(bd_t *bis)
+{
+	return pci_eth_init(bis);
+}
diff --git a/board/a3000/flash.c b/board/a3000/flash.c
index 13a5ca5b0..b671ce729 100644
--- a/board/a3000/flash.c
+++ b/board/a3000/flash.c
@@ -25,15 +25,15 @@
 #include <common.h>
 #include <mpc824x.h>
 
-#if defined(CFG_ENV_IS_IN_FLASH)
-# ifndef  CFG_ENV_ADDR
-#  define CFG_ENV_ADDR  (CFG_FLASH_BASE + CFG_ENV_OFFSET)
+#if defined(CONFIG_ENV_IS_IN_FLASH)
+# ifndef  CONFIG_ENV_ADDR
+#  define CONFIG_ENV_ADDR  (CONFIG_SYS_FLASH_BASE + CONFIG_ENV_OFFSET)
 # endif
-# ifndef  CFG_ENV_SIZE
-#  define CFG_ENV_SIZE  CFG_ENV_SECT_SIZE
+# ifndef  CONFIG_ENV_SIZE
+#  define CONFIG_ENV_SIZE  CONFIG_ENV_SECT_SIZE
 # endif
-# ifndef  CFG_ENV_SECT_SIZE
-#  define CFG_ENV_SECT_SIZE  CFG_ENV_SIZE
+# ifndef  CONFIG_ENV_SECT_SIZE
+#  define CONFIG_ENV_SECT_SIZE  CONFIG_ENV_SIZE
 # endif
 #endif
 
@@ -48,7 +48,7 @@
 #endif
 /*---------------------------------------------------------------------*/
 
-flash_info_t	flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips	*/
+flash_info_t	flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips	*/
 
 /*-----------------------------------------------------------------------
  * Functions
@@ -65,13 +65,13 @@ static void flash_get_offsets (ulong base, flash_info_t *info);
 
 unsigned long flash_init (void)
 {
-	unsigned long flash_banks[CFG_MAX_FLASH_BANKS] = CFG_FLASH_BANKS;
-	unsigned long size, size_b[CFG_MAX_FLASH_BANKS];
+	unsigned long flash_banks[CONFIG_SYS_MAX_FLASH_BANKS] = CONFIG_SYS_FLASH_BANKS;
+	unsigned long size, size_b[CONFIG_SYS_MAX_FLASH_BANKS];
 
 	int i;
 
 	/* Init: no FLASHes known */
-	for (i=0; i<CFG_MAX_FLASH_BANKS; ++i)
+	for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i)
 	{
 		flash_info[i].flash_id = FLASH_UNKNOWN;
 
@@ -99,27 +99,27 @@ unsigned long flash_init (void)
 	}
 
 
-#if CFG_MONITOR_BASE >= CFG_FLASH_BASE
-	DEBUGF("protect monitor %x @ %x\n", CFG_MONITOR_BASE, CFG_MONITOR_LEN);
+#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE
+	DEBUGF("protect monitor %x @ %x\n", CONFIG_SYS_MONITOR_BASE, CONFIG_SYS_MONITOR_LEN);
 	/* monitor protection ON by default */
 	flash_protect(FLAG_PROTECT_SET,
-		      CFG_MONITOR_BASE,
-		      CFG_MONITOR_BASE+CFG_MONITOR_LEN-1,
+		      CONFIG_SYS_MONITOR_BASE,
+		      CONFIG_SYS_MONITOR_BASE+CONFIG_SYS_MONITOR_LEN-1,
 		      &flash_info[0]);
 #endif
 
-#ifdef	CFG_ENV_IS_IN_FLASH
+#ifdef	CONFIG_ENV_IS_IN_FLASH
 	/* ENV protection ON by default */
-	DEBUGF("protect environtment %x @ %x\n", CFG_ENV_ADDR, CFG_ENV_SECT_SIZE);
+	DEBUGF("protect environtment %x @ %x\n", CONFIG_ENV_ADDR, CONFIG_ENV_SECT_SIZE);
 	flash_protect(FLAG_PROTECT_SET,
-		      CFG_ENV_ADDR,
-		      CFG_ENV_ADDR+CFG_ENV_SECT_SIZE-1,
+		      CONFIG_ENV_ADDR,
+		      CONFIG_ENV_ADDR+CONFIG_ENV_SECT_SIZE-1,
 		      &flash_info[0]);
 #endif
 
 	size = 0;
 	DEBUGF("## Final Flash bank sizes: ");
-	for (i=0; i<CFG_MAX_FLASH_BANKS; ++i)
+	for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i)
 	{
 		DEBUGF("%08lx ", size_b[i]);
 		size += size_b[i];
@@ -285,10 +285,10 @@ static ulong flash_get_size (vu_char *addr, flash_info_t *info)
 
 	}
 
-	if (info->sector_count > CFG_MAX_FLASH_SECT) {
+	if (info->sector_count > CONFIG_SYS_MAX_FLASH_SECT) {
 		printf ("** ERROR: sector count %d > max (%d) **\n",
-			info->sector_count, CFG_MAX_FLASH_SECT);
-		info->sector_count = CFG_MAX_FLASH_SECT;
+			info->sector_count, CONFIG_SYS_MAX_FLASH_SECT);
+		info->sector_count = CONFIG_SYS_MAX_FLASH_SECT;
 	}
 
 	addr[0] = BS(0xFF);		/* restore read mode */
@@ -356,7 +356,7 @@ int	flash_erase (flash_info_t *info, int s_first, int s_last)
 			udelay (1000);
 
 			while (((status = BS(*addr)) & BYTEME(0x00800080)) != BYTEME(0x00800080)) {
-				if ((now=get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+				if ((now=get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
 					printf ("Timeout\n");
 					*addr = BS(0xB0); /* suspend erase	  */
 					*addr = BS(0xFF); /* reset to read mode */
@@ -439,7 +439,7 @@ static int write_data (flash_info_t *info, uchar *dest, uchar data)
 	start = get_timer (0);
 
 	while (((status = BS(*addr)) & BYTEME(0x00800080)) != BYTEME(0x00800080)) {
-		if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+		if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
 			*addr = BS(0xFF);	/* restore read mode */
 			return 1;
 		}
diff --git a/board/actux1/actux1.c b/board/actux1/actux1.c
index d1d7f6cd3..399be23e1 100644
--- a/board/actux1/actux1.c
+++ b/board/actux1/actux1.c
@@ -49,16 +49,16 @@ int board_init (void)
 	/* adress of boot parameters */
 	gd->bd->bi_boot_params = 0x00000100;
 
-	GPIO_OUTPUT_CLEAR (CFG_GPIO_IORST);
-	GPIO_OUTPUT_ENABLE (CFG_GPIO_IORST);
+	GPIO_OUTPUT_CLEAR (CONFIG_SYS_GPIO_IORST);
+	GPIO_OUTPUT_ENABLE (CONFIG_SYS_GPIO_IORST);
 
 	/* Setup GPIO's for PCI INTA */
-	GPIO_OUTPUT_DISABLE (CFG_GPIO_PCI1_INTA);
-	GPIO_INT_ACT_LOW_SET (CFG_GPIO_PCI1_INTA);
+	GPIO_OUTPUT_DISABLE (CONFIG_SYS_GPIO_PCI1_INTA);
+	GPIO_INT_ACT_LOW_SET (CONFIG_SYS_GPIO_PCI1_INTA);
 
 	/* Setup GPIO's for 33MHz clock output */
-	GPIO_OUTPUT_ENABLE (CFG_GPIO_PCI_CLK);
-	GPIO_OUTPUT_ENABLE (CFG_GPIO_EXTBUS_CLK);
+	GPIO_OUTPUT_ENABLE (CONFIG_SYS_GPIO_PCI_CLK);
+	GPIO_OUTPUT_ENABLE (CONFIG_SYS_GPIO_EXTBUS_CLK);
 	*IXP425_GPIO_GPCLKR = 0x011001FF;
 
 	/* CS5: Debug port */
@@ -69,7 +69,7 @@ int board_init (void)
 	*IXP425_EXP_CS7 = 0x80900003;
 
 	udelay (533);
-	GPIO_OUTPUT_SET (CFG_GPIO_IORST);
+	GPIO_OUTPUT_SET (CONFIG_SYS_GPIO_IORST);
 
 	ACTUX1_LED1 (2);
 	ACTUX1_LED2 (2);
diff --git a/board/actux1/actux1_hw.h b/board/actux1/actux1_hw.h
index bb3b7f953..fe454c58e 100644
--- a/board/actux1/actux1_hw.h
+++ b/board/actux1/actux1_hw.h
@@ -42,16 +42,16 @@
 #define ACTUX1_BOARDREL	(readb(IXP425_EXP_BUS_CS6_BASE_PHYS) & 0x0F)
 
 /* GPIO settings */
-#define CFG_GPIO_PCI1_INTA		2
-#define CFG_GPIO_PCI2_INTA		3
-#define CFG_GPIO_I2C_SDA		4
-#define CFG_GPIO_I2C_SCL		5
-#define CFG_GPIO_DBGJUMPER		9
-#define CFG_GPIO_BUTTON1		10
-#define CFG_GPIO_DBGSENSE		11
-#define CFG_GPIO_DTR			12
-#define CFG_GPIO_IORST			13	/* Out */
-#define CFG_GPIO_PCI_CLK		14	/* Out */
-#define CFG_GPIO_EXTBUS_CLK		15	/* Out */
+#define CONFIG_SYS_GPIO_PCI1_INTA		2
+#define CONFIG_SYS_GPIO_PCI2_INTA		3
+#define CONFIG_SYS_GPIO_I2C_SDA		4
+#define CONFIG_SYS_GPIO_I2C_SCL		5
+#define CONFIG_SYS_GPIO_DBGJUMPER		9
+#define CONFIG_SYS_GPIO_BUTTON1		10
+#define CONFIG_SYS_GPIO_DBGSENSE		11
+#define CONFIG_SYS_GPIO_DTR			12
+#define CONFIG_SYS_GPIO_IORST			13	/* Out */
+#define CONFIG_SYS_GPIO_PCI_CLK		14	/* Out */
+#define CONFIG_SYS_GPIO_EXTBUS_CLK		15	/* Out */
 
 #endif
diff --git a/board/actux1/u-boot.lds b/board/actux1/u-boot.lds
index 0de78d32a..ccdb78e9c 100644
--- a/board/actux1/u-boot.lds
+++ b/board/actux1/u-boot.lds
@@ -37,7 +37,7 @@ SECTIONS
 		common/dlmalloc.o(.text)
 		cpu/ixp/cpu.o(.text)
 		. = env_offset;
-		common/environment.o(.ppcenv)
+		common/env_embedded.o(.ppcenv)
 		* (.text)
 	}
 
@@ -64,6 +64,7 @@ SECTIONS
 	__bss_start =.;
 	.bss (NOLOAD): {
 		*(.bss)
+		. = ALIGN(4);
 	}
 	_end =.;
 }
diff --git a/board/actux2/actux2.c b/board/actux2/actux2.c
index 99daef6c5..d6aaad620 100644
--- a/board/actux2/actux2.c
+++ b/board/actux2/actux2.c
@@ -50,24 +50,24 @@ int board_init (void)
 	/* adress of boot parameters */
 	gd->bd->bi_boot_params = 0x00000100;
 
-	GPIO_OUTPUT_ENABLE (CFG_GPIO_IORST);
-	GPIO_OUTPUT_ENABLE (CFG_GPIO_ETHRST);
-	GPIO_OUTPUT_ENABLE (CFG_GPIO_DSR);
-	GPIO_OUTPUT_ENABLE (CFG_GPIO_DCD);
+	GPIO_OUTPUT_ENABLE (CONFIG_SYS_GPIO_IORST);
+	GPIO_OUTPUT_ENABLE (CONFIG_SYS_GPIO_ETHRST);
+	GPIO_OUTPUT_ENABLE (CONFIG_SYS_GPIO_DSR);
+	GPIO_OUTPUT_ENABLE (CONFIG_SYS_GPIO_DCD);
 
-	GPIO_OUTPUT_CLEAR (CFG_GPIO_IORST);
-	GPIO_OUTPUT_CLEAR (CFG_GPIO_ETHRST);
+	GPIO_OUTPUT_CLEAR (CONFIG_SYS_GPIO_IORST);
+	GPIO_OUTPUT_CLEAR (CONFIG_SYS_GPIO_ETHRST);
 
-	GPIO_OUTPUT_CLEAR (CFG_GPIO_DSR);
-	GPIO_OUTPUT_SET (CFG_GPIO_DCD);
+	GPIO_OUTPUT_CLEAR (CONFIG_SYS_GPIO_DSR);
+	GPIO_OUTPUT_SET (CONFIG_SYS_GPIO_DCD);
 
 	/* Setup GPIO's for Interrupt inputs */
-	GPIO_OUTPUT_DISABLE (CFG_GPIO_DBGINT);
-	GPIO_OUTPUT_DISABLE (CFG_GPIO_ETHINT);
+	GPIO_OUTPUT_DISABLE (CONFIG_SYS_GPIO_DBGINT);
+	GPIO_OUTPUT_DISABLE (CONFIG_SYS_GPIO_ETHINT);
 
 	/* Setup GPIO's for 33MHz clock output */
-	GPIO_OUTPUT_ENABLE (CFG_GPIO_PCI_CLK);
-	GPIO_OUTPUT_ENABLE (CFG_GPIO_EXTBUS_CLK);
+	GPIO_OUTPUT_ENABLE (CONFIG_SYS_GPIO_PCI_CLK);
+	GPIO_OUTPUT_ENABLE (CONFIG_SYS_GPIO_EXTBUS_CLK);
 	*IXP425_GPIO_GPCLKR = 0x011001FF;
 
 	/* CS1: IPAC-X */
@@ -80,8 +80,8 @@ int board_init (void)
 	*IXP425_EXP_CS7 = 0x80900003;
 
 	udelay (533);
-	GPIO_OUTPUT_SET (CFG_GPIO_IORST);
-	GPIO_OUTPUT_SET (CFG_GPIO_ETHRST);
+	GPIO_OUTPUT_SET (CONFIG_SYS_GPIO_IORST);
+	GPIO_OUTPUT_SET (CONFIG_SYS_GPIO_ETHRST);
 
 	ACTUX2_LED1 (1);
 	ACTUX2_LED2 (0);
diff --git a/board/actux2/actux2_hw.h b/board/actux2/actux2_hw.h
index 8ffb82a81..0f5ebcbf9 100644
--- a/board/actux2/actux2_hw.h
+++ b/board/actux2/actux2_hw.h
@@ -39,21 +39,21 @@
 /*
  * GPIO settings
  */
-#define CFG_GPIO_DBGINT			0
-#define CFG_GPIO_ETHINT			1
-#define CFG_GPIO_ETHRST			2	/* Out */
-#define CFG_GPIO_LED5_GN		3	/* Out */
-#define CFG_GPIO_UNUSED4		4
-#define CFG_GPIO_UNUSED5		5
-#define CFG_GPIO_DSR			6	/* Out */
-#define CFG_GPIO_DCD			7	/* Out */
-#define CFG_GPIO_IPAC_INT		8
-#define CFG_GPIO_DBGJUMPER		9
-#define CFG_GPIO_BUTTON1		10
-#define CFG_GPIO_DBGSENSE		11
-#define CFG_GPIO_DTR			12
-#define CFG_GPIO_IORST			13	/* Out */
-#define CFG_GPIO_PCI_CLK		14	/* Out */
-#define CFG_GPIO_EXTBUS_CLK		15	/* Out */
+#define CONFIG_SYS_GPIO_DBGINT			0
+#define CONFIG_SYS_GPIO_ETHINT			1
+#define CONFIG_SYS_GPIO_ETHRST			2	/* Out */
+#define CONFIG_SYS_GPIO_LED5_GN		3	/* Out */
+#define CONFIG_SYS_GPIO_UNUSED4		4
+#define CONFIG_SYS_GPIO_UNUSED5		5
+#define CONFIG_SYS_GPIO_DSR			6	/* Out */
+#define CONFIG_SYS_GPIO_DCD			7	/* Out */
+#define CONFIG_SYS_GPIO_IPAC_INT		8
+#define CONFIG_SYS_GPIO_DBGJUMPER		9
+#define CONFIG_SYS_GPIO_BUTTON1		10
+#define CONFIG_SYS_GPIO_DBGSENSE		11
+#define CONFIG_SYS_GPIO_DTR			12
+#define CONFIG_SYS_GPIO_IORST			13	/* Out */
+#define CONFIG_SYS_GPIO_PCI_CLK		14	/* Out */
+#define CONFIG_SYS_GPIO_EXTBUS_CLK		15	/* Out */
 
 #endif
diff --git a/board/actux2/u-boot.lds b/board/actux2/u-boot.lds
index 90cafce6c..113193619 100644
--- a/board/actux2/u-boot.lds
+++ b/board/actux2/u-boot.lds
@@ -38,7 +38,7 @@ SECTIONS
 		cpu/ixp/cpu.o(.text)
 
 		. = env_offset;
-		common/environment.o (.ppcenv)
+		common/env_embedded.o (.ppcenv)
 
 		* (.text)
 	}
@@ -69,6 +69,7 @@ SECTIONS
 	__bss_start =.;
 	.bss (NOLOAD): {
 		*(.bss)
+		. = ALIGN(4);
 	}
 	_end =.;
 }
diff --git a/board/actux3/actux3.c b/board/actux3/actux3.c
index 812bc2b1a..63bf365b8 100644
--- a/board/actux3/actux3.c
+++ b/board/actux3/actux3.c
@@ -50,35 +50,35 @@ int board_init (void)
 	/* adress of boot parameters */
 	gd->bd->bi_boot_params = 0x00000100;
 
-	GPIO_OUTPUT_ENABLE (CFG_GPIO_IORST);
-	GPIO_OUTPUT_ENABLE (CFG_GPIO_ETHRST);
-	GPIO_OUTPUT_ENABLE (CFG_GPIO_DSR);
-	GPIO_OUTPUT_ENABLE (CFG_GPIO_DCD);
-	GPIO_OUTPUT_ENABLE (CFG_GPIO_LED5_GN);
-	GPIO_OUTPUT_ENABLE (CFG_GPIO_LED6_RT);
-	GPIO_OUTPUT_ENABLE (CFG_GPIO_LED6_GN);
+	GPIO_OUTPUT_ENABLE (CONFIG_SYS_GPIO_IORST);
+	GPIO_OUTPUT_ENABLE (CONFIG_SYS_GPIO_ETHRST);
+	GPIO_OUTPUT_ENABLE (CONFIG_SYS_GPIO_DSR);
+	GPIO_OUTPUT_ENABLE (CONFIG_SYS_GPIO_DCD);
+	GPIO_OUTPUT_ENABLE (CONFIG_SYS_GPIO_LED5_GN);
+	GPIO_OUTPUT_ENABLE (CONFIG_SYS_GPIO_LED6_RT);
+	GPIO_OUTPUT_ENABLE (CONFIG_SYS_GPIO_LED6_GN);
 
-	GPIO_OUTPUT_CLEAR (CFG_GPIO_IORST);
-	GPIO_OUTPUT_CLEAR (CFG_GPIO_ETHRST);
+	GPIO_OUTPUT_CLEAR (CONFIG_SYS_GPIO_IORST);
+	GPIO_OUTPUT_CLEAR (CONFIG_SYS_GPIO_ETHRST);
 
-	GPIO_OUTPUT_CLEAR (CFG_GPIO_DSR);
-	GPIO_OUTPUT_SET (CFG_GPIO_DCD);
+	GPIO_OUTPUT_CLEAR (CONFIG_SYS_GPIO_DSR);
+	GPIO_OUTPUT_SET (CONFIG_SYS_GPIO_DCD);
 
-	GPIO_OUTPUT_CLEAR (CFG_GPIO_LED5_GN);
-	GPIO_OUTPUT_CLEAR (CFG_GPIO_LED6_RT);
-	GPIO_OUTPUT_CLEAR (CFG_GPIO_LED6_GN);
+	GPIO_OUTPUT_CLEAR (CONFIG_SYS_GPIO_LED5_GN);
+	GPIO_OUTPUT_CLEAR (CONFIG_SYS_GPIO_LED6_RT);
+	GPIO_OUTPUT_CLEAR (CONFIG_SYS_GPIO_LED6_GN);
 
 	/*
 	 * Setup GPIO's for Interrupt inputs
 	 */
-	GPIO_OUTPUT_DISABLE (CFG_GPIO_DBGINT);
-	GPIO_OUTPUT_DISABLE (CFG_GPIO_ETHINT);
+	GPIO_OUTPUT_DISABLE (CONFIG_SYS_GPIO_DBGINT);
+	GPIO_OUTPUT_DISABLE (CONFIG_SYS_GPIO_ETHINT);
 
 	/*
 	 * Setup GPIO's for 33MHz clock output
 	 */
-	GPIO_OUTPUT_ENABLE (CFG_GPIO_PCI_CLK);
-	GPIO_OUTPUT_ENABLE (CFG_GPIO_EXTBUS_CLK);
+	GPIO_OUTPUT_ENABLE (CONFIG_SYS_GPIO_PCI_CLK);
+	GPIO_OUTPUT_ENABLE (CONFIG_SYS_GPIO_EXTBUS_CLK);
 	*IXP425_GPIO_GPCLKR = 0x011001FF;
 
 	/* CS1: IPAC-X */
@@ -91,8 +91,8 @@ int board_init (void)
 	*IXP425_EXP_CS7 = 0x80900003;
 
 	udelay (533);
-	GPIO_OUTPUT_SET (CFG_GPIO_IORST);
-	GPIO_OUTPUT_SET (CFG_GPIO_ETHRST);
+	GPIO_OUTPUT_SET (CONFIG_SYS_GPIO_IORST);
+	GPIO_OUTPUT_SET (CONFIG_SYS_GPIO_ETHRST);
 
 	ACTUX3_LED1_RT (1);
 	ACTUX3_LED1_GN (0);
diff --git a/board/actux3/actux3_hw.h b/board/actux3/actux3_hw.h
index 9b7cbce6f..c3c0cfc5d 100644
--- a/board/actux3/actux3_hw.h
+++ b/board/actux3/actux3_hw.h
@@ -41,20 +41,20 @@
 #define ACTUX3_OPTION		(readb(IXP425_EXP_BUS_CS6_BASE_PHYS) & 0xF0)
 
 /* GPIO settings */
-#define CFG_GPIO_DBGINT			0
-#define CFG_GPIO_ETHINT			1
-#define CFG_GPIO_ETHRST			2	/* Out */
-#define CFG_GPIO_LED5_GN		3	/* Out */
-#define CFG_GPIO_LED6_RT		4	/* Out */
-#define CFG_GPIO_LED6_GN		5	/* Out */
-#define CFG_GPIO_DSR			6	/* Out */
-#define CFG_GPIO_DCD			7	/* Out */
-#define CFG_GPIO_DBGJUMPER		9
-#define CFG_GPIO_BUTTON1		10
-#define CFG_GPIO_DBGSENSE		11
-#define CFG_GPIO_DTR			12
-#define CFG_GPIO_IORST			13	/* Out */
-#define CFG_GPIO_PCI_CLK		14	/* Out */
-#define CFG_GPIO_EXTBUS_CLK		15	/* Out */
+#define CONFIG_SYS_GPIO_DBGINT			0
+#define CONFIG_SYS_GPIO_ETHINT			1
+#define CONFIG_SYS_GPIO_ETHRST			2	/* Out */
+#define CONFIG_SYS_GPIO_LED5_GN		3	/* Out */
+#define CONFIG_SYS_GPIO_LED6_RT		4	/* Out */
+#define CONFIG_SYS_GPIO_LED6_GN		5	/* Out */
+#define CONFIG_SYS_GPIO_DSR			6	/* Out */
+#define CONFIG_SYS_GPIO_DCD			7	/* Out */
+#define CONFIG_SYS_GPIO_DBGJUMPER		9
+#define CONFIG_SYS_GPIO_BUTTON1		10
+#define CONFIG_SYS_GPIO_DBGSENSE		11
+#define CONFIG_SYS_GPIO_DTR			12
+#define CONFIG_SYS_GPIO_IORST			13	/* Out */
+#define CONFIG_SYS_GPIO_PCI_CLK		14	/* Out */
+#define CONFIG_SYS_GPIO_EXTBUS_CLK		15	/* Out */
 
 #endif
diff --git a/board/actux3/u-boot.lds b/board/actux3/u-boot.lds
index b9a9eb9ff..e861955db 100644
--- a/board/actux3/u-boot.lds
+++ b/board/actux3/u-boot.lds
@@ -38,7 +38,7 @@ SECTIONS
 		cpu/ixp/cpu.o (.text)
 
 		. = env_offset;
-		common/environment.o (.ppcenv)
+		common/env_embedded.o (.ppcenv)
 
 		* (.text)
 	}
@@ -69,6 +69,7 @@ SECTIONS
 	__bss_start =.;
 	.bss (NOLOAD): {
 		*(.bss)
+		. = ALIGN(4);
 	}
 	_end =.;
 }
diff --git a/board/actux4/actux4.c b/board/actux4/actux4.c
index 84037faba..f373b5877 100644
--- a/board/actux4/actux4.c
+++ b/board/actux4/actux4.c
@@ -49,53 +49,53 @@ int board_init (void)
 	/* adress of boot parameters */
 	gd->bd->bi_boot_params = 0x00000100;
 
-	GPIO_OUTPUT_CLEAR (CFG_GPIO_nPWRON);
-	GPIO_OUTPUT_ENABLE (CFG_GPIO_nPWRON);
+	GPIO_OUTPUT_CLEAR (CONFIG_SYS_GPIO_nPWRON);
+	GPIO_OUTPUT_ENABLE (CONFIG_SYS_GPIO_nPWRON);
 
-	GPIO_OUTPUT_CLEAR (CFG_GPIO_IORST);
-	GPIO_OUTPUT_ENABLE (CFG_GPIO_IORST);
+	GPIO_OUTPUT_CLEAR (CONFIG_SYS_GPIO_IORST);
+	GPIO_OUTPUT_ENABLE (CONFIG_SYS_GPIO_IORST);
 
 	/* led not populated on board*/
-	GPIO_OUTPUT_ENABLE (CFG_GPIO_LED3);
-	GPIO_OUTPUT_SET (CFG_GPIO_LED3);
+	GPIO_OUTPUT_ENABLE (CONFIG_SYS_GPIO_LED3);
+	GPIO_OUTPUT_SET (CONFIG_SYS_GPIO_LED3);
 
 	/* middle LED */
-	GPIO_OUTPUT_ENABLE (CFG_GPIO_LED2);
-	GPIO_OUTPUT_SET (CFG_GPIO_LED2);
+	GPIO_OUTPUT_ENABLE (CONFIG_SYS_GPIO_LED2);
+	GPIO_OUTPUT_SET (CONFIG_SYS_GPIO_LED2);
 
 	/* right LED */
 	/* weak pulldown = LED weak on */
-	GPIO_OUTPUT_DISABLE (CFG_GPIO_LED1);
-	GPIO_OUTPUT_SET (CFG_GPIO_LED1);
+	GPIO_OUTPUT_DISABLE (CONFIG_SYS_GPIO_LED1);
+	GPIO_OUTPUT_SET (CONFIG_SYS_GPIO_LED1);
 
 	/* Setup GPIO's for Interrupt inputs */
-	GPIO_OUTPUT_DISABLE (CFG_GPIO_USBINTA);
-	GPIO_OUTPUT_DISABLE (CFG_GPIO_USBINTB);
-	GPIO_OUTPUT_DISABLE (CFG_GPIO_USBINTC);
-	GPIO_OUTPUT_DISABLE (CFG_GPIO_RTCINT);
-	GPIO_OUTPUT_DISABLE (CFG_GPIO_PCI_INTA);
-	GPIO_OUTPUT_DISABLE (CFG_GPIO_PCI_INTB);
-
-	GPIO_INT_ACT_LOW_SET (CFG_GPIO_USBINTA);
-	GPIO_INT_ACT_LOW_SET (CFG_GPIO_USBINTB);
-	GPIO_INT_ACT_LOW_SET (CFG_GPIO_USBINTC);
-	GPIO_INT_ACT_LOW_SET (CFG_GPIO_RTCINT);
-	GPIO_INT_ACT_LOW_SET (CFG_GPIO_PCI_INTA);
-	GPIO_INT_ACT_LOW_SET (CFG_GPIO_PCI_INTB);
+	GPIO_OUTPUT_DISABLE (CONFIG_SYS_GPIO_USBINTA);
+	GPIO_OUTPUT_DISABLE (CONFIG_SYS_GPIO_USBINTB);
+	GPIO_OUTPUT_DISABLE (CONFIG_SYS_GPIO_USBINTC);
+	GPIO_OUTPUT_DISABLE (CONFIG_SYS_GPIO_RTCINT);
+	GPIO_OUTPUT_DISABLE (CONFIG_SYS_GPIO_PCI_INTA);
+	GPIO_OUTPUT_DISABLE (CONFIG_SYS_GPIO_PCI_INTB);
+
+	GPIO_INT_ACT_LOW_SET (CONFIG_SYS_GPIO_USBINTA);
+	GPIO_INT_ACT_LOW_SET (CONFIG_SYS_GPIO_USBINTB);
+	GPIO_INT_ACT_LOW_SET (CONFIG_SYS_GPIO_USBINTC);
+	GPIO_INT_ACT_LOW_SET (CONFIG_SYS_GPIO_RTCINT);
+	GPIO_INT_ACT_LOW_SET (CONFIG_SYS_GPIO_PCI_INTA);
+	GPIO_INT_ACT_LOW_SET (CONFIG_SYS_GPIO_PCI_INTB);
 
 	/* Setup GPIO's for 33MHz clock output */
 	*IXP425_GPIO_GPCLKR = 0x011001FF;
-	GPIO_OUTPUT_ENABLE (CFG_GPIO_EXTBUS_CLK);
-	GPIO_OUTPUT_ENABLE (CFG_GPIO_PCI_CLK);
+	GPIO_OUTPUT_ENABLE (CONFIG_SYS_GPIO_EXTBUS_CLK);
+	GPIO_OUTPUT_ENABLE (CONFIG_SYS_GPIO_PCI_CLK);
 
 	*IXP425_EXP_CS1 = 0xbd113c42;
 
 	udelay (10000);
-	GPIO_OUTPUT_SET (CFG_GPIO_IORST);
+	GPIO_OUTPUT_SET (CONFIG_SYS_GPIO_IORST);
 	udelay (10000);
-	GPIO_OUTPUT_CLEAR (CFG_GPIO_IORST);
+	GPIO_OUTPUT_CLEAR (CONFIG_SYS_GPIO_IORST);
 	udelay (10000);
-	GPIO_OUTPUT_SET (CFG_GPIO_IORST);
+	GPIO_OUTPUT_SET (CONFIG_SYS_GPIO_IORST);
 
 	return 0;
 }
diff --git a/board/actux4/actux4_hw.h b/board/actux4/actux4_hw.h
index 8b3ecf341..afd1c06f5 100644
--- a/board/actux4/actux4_hw.h
+++ b/board/actux4/actux4_hw.h
@@ -29,21 +29,21 @@
 /*
  * GPIO settings
  */
-#define CFG_GPIO_USBINTA		0
-#define CFG_GPIO_USBINTB		1
-#define CFG_GPIO_USBINTC		2
-#define CFG_GPIO_nPWRON			3	/* Out */
-#define CFG_GPIO_I2C_SCL		4
-#define CFG_GPIO_I2C_SDA		5
-#define CFG_GPIO_PCI_INTB		6
-#define CFG_GPIO_BUTTON1		7
-#define CFG_GPIO_LED1			8	/* Out */
-#define CFG_GPIO_RTCINT			9
-#define CFG_GPIO_LED2			10	/* Out */
-#define CFG_GPIO_PCI_INTA		11
-#define CFG_GPIO_IORST			12	/* Out */
-#define CFG_GPIO_LED3			13	/* Out */
-#define CFG_GPIO_PCI_CLK		14	/* Out */
-#define CFG_GPIO_EXTBUS_CLK		15	/* Out */
+#define CONFIG_SYS_GPIO_USBINTA		0
+#define CONFIG_SYS_GPIO_USBINTB		1
+#define CONFIG_SYS_GPIO_USBINTC		2
+#define CONFIG_SYS_GPIO_nPWRON			3	/* Out */
+#define CONFIG_SYS_GPIO_I2C_SCL		4
+#define CONFIG_SYS_GPIO_I2C_SDA		5
+#define CONFIG_SYS_GPIO_PCI_INTB		6
+#define CONFIG_SYS_GPIO_BUTTON1		7
+#define CONFIG_SYS_GPIO_LED1			8	/* Out */
+#define CONFIG_SYS_GPIO_RTCINT			9
+#define CONFIG_SYS_GPIO_LED2			10	/* Out */
+#define CONFIG_SYS_GPIO_PCI_INTA		11
+#define CONFIG_SYS_GPIO_IORST			12	/* Out */
+#define CONFIG_SYS_GPIO_LED3			13	/* Out */
+#define CONFIG_SYS_GPIO_PCI_CLK		14	/* Out */
+#define CONFIG_SYS_GPIO_EXTBUS_CLK		15	/* Out */
 
 #endif
diff --git a/board/actux4/u-boot.lds b/board/actux4/u-boot.lds
index c8784a08b..0e1155ac7 100644
--- a/board/actux4/u-boot.lds
+++ b/board/actux4/u-boot.lds
@@ -60,6 +60,7 @@ SECTIONS
 	__bss_start =.;
 	.bss (NOLOAD): {
 		*(.bss)
+		. = ALIGN(4);
 	}
 	_end =.;
 }
diff --git a/board/adder/adder.c b/board/adder/adder.c
index e8a5737f5..87791deb5 100644
--- a/board/adder/adder.c
+++ b/board/adder/adder.c
@@ -68,7 +68,7 @@ static uint sdram_table[] = {
 phys_size_t initdram (int board_type)
 {
 	long int msize;
-	volatile immap_t     *immap  = (volatile immap_t *)CFG_IMMR;
+	volatile immap_t     *immap  = (volatile immap_t *)CONFIG_SYS_IMMR;
 	volatile memctl8xx_t *memctl = &immap->im_memctl;
 
 	upmconfig(UPMA, sdram_table, sizeof(sdram_table) / sizeof(uint));
@@ -76,7 +76,7 @@ phys_size_t initdram (int board_type)
 	/* Configure SDRAM refresh */
 	memctl->memc_mptpr = MPTPR_PTP_DIV32; /* BRGCLK/32 */
 
-	memctl->memc_mamr = (94 << 24) | CFG_MAMR; /* No refresh */
+	memctl->memc_mamr = (94 << 24) | CONFIG_SYS_MAMR; /* No refresh */
 	udelay(200);
 
 	/* Run precharge from location 0x15 */
@@ -94,10 +94,10 @@ phys_size_t initdram (int board_type)
 	udelay(200);
 
 	memctl->memc_mamr |=  MAMR_PTAE; /* Enable refresh */
-	memctl->memc_or1   = ~(CFG_SDRAM_MAX_SIZE - 1) | OR_CSNT_SAM;
-	memctl->memc_br1   =  CFG_SDRAM_BASE | BR_PS_32 | BR_MS_UPMA | BR_V;
+	memctl->memc_or1   = ~(CONFIG_SYS_SDRAM_MAX_SIZE - 1) | OR_CSNT_SAM;
+	memctl->memc_br1   =  CONFIG_SYS_SDRAM_BASE | BR_PS_32 | BR_MS_UPMA | BR_V;
 
-	msize = get_ram_size(CFG_SDRAM_BASE, CFG_SDRAM_MAX_SIZE);
+	msize = get_ram_size(CONFIG_SYS_SDRAM_BASE, CONFIG_SYS_SDRAM_MAX_SIZE);
 	memctl->memc_or1  |= ~(msize - 1);
 
 	return msize;
diff --git a/board/adder/u-boot.lds b/board/adder/u-boot.lds
index 25aaa7d8f..d97c04918 100644
--- a/board/adder/u-boot.lds
+++ b/board/adder/u-boot.lds
@@ -118,6 +118,7 @@ SECTIONS
    *(.dynbss)
    *(.bss)
    *(COMMON)
+   . = ALIGN(4);
   }
   _end = . ;
   PROVIDE (end = .);
diff --git a/board/ads5121/ads5121.c b/board/ads5121/ads5121.c
index deaa292b9..06109286e 100644
--- a/board/ads5121/ads5121.c
+++ b/board/ads5121/ads5121.c
@@ -53,16 +53,16 @@ long int fixed_sdram(void);
 
 int board_early_init_f (void)
 {
-	volatile immap_t *im = (immap_t *) CFG_IMMR;
+	volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR;
 	u32 lpcaw;
 
 	/*
 	 * Initialize Local Window for the CPLD registers access (CS2 selects
 	 * the CPLD chip)
 	 */
-	im->sysconf.lpcs2aw = CSAW_START(CFG_CPLD_BASE) |
-			      CSAW_STOP(CFG_CPLD_BASE, CFG_CPLD_SIZE);
-	im->lpc.cs_cfg[2] = CFG_CS2_CFG;
+	im->sysconf.lpcs2aw = CSAW_START(CONFIG_SYS_CPLD_BASE) |
+			      CSAW_STOP(CONFIG_SYS_CPLD_BASE, CONFIG_SYS_CPLD_SIZE);
+	im->lpc.cs_cfg[2] = CONFIG_SYS_CS2_CFG;
 
 	/*
 	 * According to MPC5121e RM, configuring local access windows should
@@ -80,21 +80,21 @@ int board_early_init_f (void)
 	 */
 
 #ifdef CONFIG_ADS5121_REV2
-	*((volatile u8 *)(CFG_CPLD_BASE + 0x08)) = 0xC1;
+	*((volatile u8 *)(CONFIG_SYS_CPLD_BASE + 0x08)) = 0xC1;
 #else
-	if (*((u8 *)(CFG_CPLD_BASE + 0x08)) & 0x04) {
-		*((volatile u8 *)(CFG_CPLD_BASE + 0x08)) = 0xC1;
+	if (*((u8 *)(CONFIG_SYS_CPLD_BASE + 0x08)) & 0x04) {
+		*((volatile u8 *)(CONFIG_SYS_CPLD_BASE + 0x08)) = 0xC1;
 	} else {
 		/* running from Backup flash */
-		*((volatile u8 *)(CFG_CPLD_BASE + 0x08)) = 0x32;
+		*((volatile u8 *)(CONFIG_SYS_CPLD_BASE + 0x08)) = 0x32;
 	}
 #endif
 	/*
 	 * Configure Flash Speed
 	 */
-	*((volatile u32 *)(CFG_IMMR + LPC_OFFSET + CS0_CONFIG)) = CFG_CS0_CFG;
+	*((volatile u32 *)(CONFIG_SYS_IMMR + LPC_OFFSET + CS0_CONFIG)) = CONFIG_SYS_CS0_CFG;
 	if (SVR_MJREV (im->sysconf.spridr) >= 2) {
-		*((volatile u32 *)(CFG_IMMR + LPC_OFFSET + CS_ALE_TIMING_CONFIG)) = CFG_CS_ALETIMING;
+		*((volatile u32 *)(CONFIG_SYS_IMMR + LPC_OFFSET + CS_ALE_TIMING_CONFIG)) = CONFIG_SYS_CS_ALETIMING;
 	}
 	/*
 	 * Enable clocks
@@ -120,8 +120,8 @@ phys_size_t initdram (int board_type)
  */
 long int fixed_sdram (void)
 {
-	volatile immap_t *im = (immap_t *) CFG_IMMR;
-	u32 msize = CFG_DDR_SIZE * 1024 * 1024;
+	volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR;
+	u32 msize = CONFIG_SYS_DDR_SIZE * 1024 * 1024;
 	u32 msize_log2 = __ilog2 (msize);
 	u32 i;
 
@@ -129,7 +129,7 @@ long int fixed_sdram (void)
 	im->io_ctrl.regs[IOCTL_MEM/4] = IOCTRL_MUX_DDR;
 
 	/* Initialize DDR Local Window */
-	im->sysconf.ddrlaw.bar = CFG_DDR_BASE & 0xFFFFF000;
+	im->sysconf.ddrlaw.bar = CONFIG_SYS_DDR_BASE & 0xFFFFF000;
 	im->sysconf.ddrlaw.ar = msize_log2 - 1;
 
 	/*
@@ -141,68 +141,68 @@ long int fixed_sdram (void)
 	__asm__ __volatile__ ("isync");
 
 	/* Enable DDR */
-	im->mddrc.ddr_sys_config = CFG_MDDRC_SYS_CFG_EN;
+	im->mddrc.ddr_sys_config = CONFIG_SYS_MDDRC_SYS_CFG_EN;
 
 	/* Initialize DDR Priority Manager */
-	im->mddrc.prioman_config1 = CFG_MDDRCGRP_PM_CFG1;
-	im->mddrc.prioman_config2 = CFG_MDDRCGRP_PM_CFG2;
-	im->mddrc.hiprio_config = CFG_MDDRCGRP_HIPRIO_CFG;
-	im->mddrc.lut_table0_main_upper = CFG_MDDRCGRP_LUT0_MU;
-	im->mddrc.lut_table0_main_lower = CFG_MDDRCGRP_LUT0_ML;
-	im->mddrc.lut_table1_main_upper = CFG_MDDRCGRP_LUT1_MU;
-	im->mddrc.lut_table1_main_lower = CFG_MDDRCGRP_LUT1_ML;
-	im->mddrc.lut_table2_main_upper = CFG_MDDRCGRP_LUT2_MU;
-	im->mddrc.lut_table2_main_lower = CFG_MDDRCGRP_LUT2_ML;
-	im->mddrc.lut_table3_main_upper = CFG_MDDRCGRP_LUT3_MU;
-	im->mddrc.lut_table3_main_lower = CFG_MDDRCGRP_LUT3_ML;
-	im->mddrc.lut_table4_main_upper = CFG_MDDRCGRP_LUT4_MU;
-	im->mddrc.lut_table4_main_lower = CFG_MDDRCGRP_LUT4_ML;
-	im->mddrc.lut_table0_alternate_upper = CFG_MDDRCGRP_LUT0_AU;
-	im->mddrc.lut_table0_alternate_lower = CFG_MDDRCGRP_LUT0_AL;
-	im->mddrc.lut_table1_alternate_upper = CFG_MDDRCGRP_LUT1_AU;
-	im->mddrc.lut_table1_alternate_lower = CFG_MDDRCGRP_LUT1_AL;
-	im->mddrc.lut_table2_alternate_upper = CFG_MDDRCGRP_LUT2_AU;
-	im->mddrc.lut_table2_alternate_lower = CFG_MDDRCGRP_LUT2_AL;
-	im->mddrc.lut_table3_alternate_upper = CFG_MDDRCGRP_LUT3_AU;
-	im->mddrc.lut_table3_alternate_lower = CFG_MDDRCGRP_LUT3_AL;
-	im->mddrc.lut_table4_alternate_upper = CFG_MDDRCGRP_LUT4_AU;
-	im->mddrc.lut_table4_alternate_lower = CFG_MDDRCGRP_LUT4_AL;
+	im->mddrc.prioman_config1 = CONFIG_SYS_MDDRCGRP_PM_CFG1;
+	im->mddrc.prioman_config2 = CONFIG_SYS_MDDRCGRP_PM_CFG2;
+	im->mddrc.hiprio_config = CONFIG_SYS_MDDRCGRP_HIPRIO_CFG;
+	im->mddrc.lut_table0_main_upper = CONFIG_SYS_MDDRCGRP_LUT0_MU;
+	im->mddrc.lut_table0_main_lower = CONFIG_SYS_MDDRCGRP_LUT0_ML;
+	im->mddrc.lut_table1_main_upper = CONFIG_SYS_MDDRCGRP_LUT1_MU;
+	im->mddrc.lut_table1_main_lower = CONFIG_SYS_MDDRCGRP_LUT1_ML;
+	im->mddrc.lut_table2_main_upper = CONFIG_SYS_MDDRCGRP_LUT2_MU;
+	im->mddrc.lut_table2_main_lower = CONFIG_SYS_MDDRCGRP_LUT2_ML;
+	im->mddrc.lut_table3_main_upper = CONFIG_SYS_MDDRCGRP_LUT3_MU;
+	im->mddrc.lut_table3_main_lower = CONFIG_SYS_MDDRCGRP_LUT3_ML;
+	im->mddrc.lut_table4_main_upper = CONFIG_SYS_MDDRCGRP_LUT4_MU;
+	im->mddrc.lut_table4_main_lower = CONFIG_SYS_MDDRCGRP_LUT4_ML;
+	im->mddrc.lut_table0_alternate_upper = CONFIG_SYS_MDDRCGRP_LUT0_AU;
+	im->mddrc.lut_table0_alternate_lower = CONFIG_SYS_MDDRCGRP_LUT0_AL;
+	im->mddrc.lut_table1_alternate_upper = CONFIG_SYS_MDDRCGRP_LUT1_AU;
+	im->mddrc.lut_table1_alternate_lower = CONFIG_SYS_MDDRCGRP_LUT1_AL;
+	im->mddrc.lut_table2_alternate_upper = CONFIG_SYS_MDDRCGRP_LUT2_AU;
+	im->mddrc.lut_table2_alternate_lower = CONFIG_SYS_MDDRCGRP_LUT2_AL;
+	im->mddrc.lut_table3_alternate_upper = CONFIG_SYS_MDDRCGRP_LUT3_AU;
+	im->mddrc.lut_table3_alternate_lower = CONFIG_SYS_MDDRCGRP_LUT3_AL;
+	im->mddrc.lut_table4_alternate_upper = CONFIG_SYS_MDDRCGRP_LUT4_AU;
+	im->mddrc.lut_table4_alternate_lower = CONFIG_SYS_MDDRCGRP_LUT4_AL;
 
 	/* Initialize MDDRC */
-	im->mddrc.ddr_sys_config = CFG_MDDRC_SYS_CFG;
-	im->mddrc.ddr_time_config0 = CFG_MDDRC_TIME_CFG0;
-	im->mddrc.ddr_time_config1 = CFG_MDDRC_TIME_CFG1;
-	im->mddrc.ddr_time_config2 = CFG_MDDRC_TIME_CFG2;
+	im->mddrc.ddr_sys_config = CONFIG_SYS_MDDRC_SYS_CFG;
+	im->mddrc.ddr_time_config0 = CONFIG_SYS_MDDRC_TIME_CFG0;
+	im->mddrc.ddr_time_config1 = CONFIG_SYS_MDDRC_TIME_CFG1;
+	im->mddrc.ddr_time_config2 = CONFIG_SYS_MDDRC_TIME_CFG2;
 
 	/* Initialize DDR */
 	for (i = 0; i < 10; i++)
-		im->mddrc.ddr_command = CFG_MICRON_NOP;
-
-	im->mddrc.ddr_command = CFG_MICRON_PCHG_ALL;
-	im->mddrc.ddr_command = CFG_MICRON_NOP;
-	im->mddrc.ddr_command = CFG_MICRON_RFSH;
-	im->mddrc.ddr_command = CFG_MICRON_NOP;
-	im->mddrc.ddr_command = CFG_MICRON_RFSH;
-	im->mddrc.ddr_command = CFG_MICRON_NOP;
-	im->mddrc.ddr_command = CFG_MICRON_INIT_DEV_OP;
-	im->mddrc.ddr_command = CFG_MICRON_NOP;
-	im->mddrc.ddr_command = CFG_MICRON_EM2;
-	im->mddrc.ddr_command = CFG_MICRON_NOP;
-	im->mddrc.ddr_command = CFG_MICRON_PCHG_ALL;
-	im->mddrc.ddr_command = CFG_MICRON_EM2;
-	im->mddrc.ddr_command = CFG_MICRON_EM3;
-	im->mddrc.ddr_command = CFG_MICRON_EN_DLL;
-	im->mddrc.ddr_command = CFG_MICRON_INIT_DEV_OP;
-	im->mddrc.ddr_command = CFG_MICRON_PCHG_ALL;
-	im->mddrc.ddr_command = CFG_MICRON_RFSH;
-	im->mddrc.ddr_command = CFG_MICRON_INIT_DEV_OP;
-	im->mddrc.ddr_command = CFG_MICRON_OCD_DEFAULT;
-	im->mddrc.ddr_command = CFG_MICRON_PCHG_ALL;
-	im->mddrc.ddr_command = CFG_MICRON_NOP;
+		im->mddrc.ddr_command = CONFIG_SYS_MICRON_NOP;
+
+	im->mddrc.ddr_command = CONFIG_SYS_MICRON_PCHG_ALL;
+	im->mddrc.ddr_command = CONFIG_SYS_MICRON_NOP;
+	im->mddrc.ddr_command = CONFIG_SYS_MICRON_RFSH;
+	im->mddrc.ddr_command = CONFIG_SYS_MICRON_NOP;
+	im->mddrc.ddr_command = CONFIG_SYS_MICRON_RFSH;
+	im->mddrc.ddr_command = CONFIG_SYS_MICRON_NOP;
+	im->mddrc.ddr_command = CONFIG_SYS_MICRON_INIT_DEV_OP;
+	im->mddrc.ddr_command = CONFIG_SYS_MICRON_NOP;
+	im->mddrc.ddr_command = CONFIG_SYS_MICRON_EM2;
+	im->mddrc.ddr_command = CONFIG_SYS_MICRON_NOP;
+	im->mddrc.ddr_command = CONFIG_SYS_MICRON_PCHG_ALL;
+	im->mddrc.ddr_command = CONFIG_SYS_MICRON_EM2;
+	im->mddrc.ddr_command = CONFIG_SYS_MICRON_EM3;
+	im->mddrc.ddr_command = CONFIG_SYS_MICRON_EN_DLL;
+	im->mddrc.ddr_command = CONFIG_SYS_MICRON_INIT_DEV_OP;
+	im->mddrc.ddr_command = CONFIG_SYS_MICRON_PCHG_ALL;
+	im->mddrc.ddr_command = CONFIG_SYS_MICRON_RFSH;
+	im->mddrc.ddr_command = CONFIG_SYS_MICRON_INIT_DEV_OP;
+	im->mddrc.ddr_command = CONFIG_SYS_MICRON_OCD_DEFAULT;
+	im->mddrc.ddr_command = CONFIG_SYS_MICRON_PCHG_ALL;
+	im->mddrc.ddr_command = CONFIG_SYS_MICRON_NOP;
 
 	/* Start MDDRC */
-	im->mddrc.ddr_time_config0 = CFG_MDDRC_TIME_CFG0_RUN;
-	im->mddrc.ddr_sys_config = CFG_MDDRC_SYS_CFG_RUN;
+	im->mddrc.ddr_time_config0 = CONFIG_SYS_MDDRC_TIME_CFG0_RUN;
+	im->mddrc.ddr_sys_config = CONFIG_SYS_MDDRC_SYS_CFG_RUN;
 
 	return msize;
 }
@@ -292,8 +292,8 @@ static  iopin_t ioregs_init[] = {
 
 int checkboard (void)
 {
-	ushort brd_rev = *(vu_short *) (CFG_CPLD_BASE + 0x00);
-	uchar cpld_rev = *(vu_char *) (CFG_CPLD_BASE + 0x02);
+	ushort brd_rev = *(vu_short *) (CONFIG_SYS_CPLD_BASE + 0x00);
+	uchar cpld_rev = *(vu_char *) (CONFIG_SYS_CPLD_BASE + 0x02);
 
 	printf ("Board: ADS5121 rev. 0x%04x (CPLD rev. 0x%02x)\n",
 		brd_rev, cpld_rev);
diff --git a/board/ads5121/ads5121_diu.c b/board/ads5121/ads5121_diu.c
index 26628d3eb..11450aabc 100644
--- a/board/ads5121/ads5121_diu.c
+++ b/board/ads5121/ads5121_diu.c
@@ -43,7 +43,7 @@ static int xres, yres;
 
 void diu_set_pixel_clock(unsigned int pixclock)
 {
-	volatile immap_t *immap = (immap_t *)CFG_IMMR;
+	volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR;
 	volatile clk512x_t *clk = &immap->clk;
 	volatile unsigned int *clkdvdr = &clk->scfr[0];
 	unsigned long speed_ccb, temp, pixval;
@@ -100,7 +100,7 @@ int ads5121diu_init_show_bmp(cmd_tbl_t *cmdtp,
 }
 
 U_BOOT_CMD(
-	diufb, CFG_MAXARGS, 1, ads5121diu_init_show_bmp,
+	diufb, CONFIG_SYS_MAXARGS, 1, ads5121diu_init_show_bmp,
 	"diufb init | addr - Init or Display BMP file\n",
 	"init\n    - initialize DIU\n"
 	"addr\n    - display bmp at address 'addr'\n"
diff --git a/board/ads5121/pci.c b/board/ads5121/pci.c
index a338604f6..b747e812a 100644
--- a/board/ads5121/pci.c
+++ b/board/ads5121/pci.c
@@ -33,8 +33,8 @@
 DECLARE_GLOBAL_DATA_PTR;
 
 /* System RAM mapped to PCI space */
-#define CONFIG_PCI_SYS_MEM_BUS	CFG_SDRAM_BASE
-#define CONFIG_PCI_SYS_MEM_PHYS	CFG_SDRAM_BASE
+#define CONFIG_PCI_SYS_MEM_BUS	CONFIG_SYS_SDRAM_BASE
+#define CONFIG_PCI_SYS_MEM_PHYS	CONFIG_SYS_SDRAM_BASE
 
 static struct pci_controller pci_hose;
 
@@ -46,7 +46,7 @@ static struct pci_controller pci_hose;
 void
 pci_init_board(void)
 {
-	volatile immap_t *immr = (immap_t *) CFG_IMMR;
+	volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
 	volatile law512x_t *pci_law;
 	volatile pot512x_t *pci_pot;
 	volatile pcictrl512x_t *pci_ctrl;
@@ -87,10 +87,10 @@ pci_init_board(void)
 	/*
 	 * Configure PCI Local Access Windows
 	 */
-	pci_law[0].bar = CFG_PCI_MEM_PHYS & LAWBAR_BAR;
+	pci_law[0].bar = CONFIG_SYS_PCI_MEM_PHYS & LAWBAR_BAR;
 	pci_law[0].ar = LAWAR_EN | LAWAR_SIZE_512M;
 
-	pci_law[1].bar = CFG_PCI_IO_PHYS & LAWBAR_BAR;
+	pci_law[1].bar = CONFIG_SYS_PCI_IO_PHYS & LAWBAR_BAR;
 	pci_law[1].ar = LAWAR_EN | LAWAR_SIZE_16M;
 
 	/*
@@ -98,18 +98,18 @@ pci_init_board(void)
 	 */
 
 	/* PCI mem space - prefetch */
-	pci_pot[0].potar = (CFG_PCI_MEM_BASE >> 12) & POTAR_TA_MASK;
-	pci_pot[0].pobar = (CFG_PCI_MEM_PHYS >> 12) & POBAR_BA_MASK;
+	pci_pot[0].potar = (CONFIG_SYS_PCI_MEM_BASE >> 12) & POTAR_TA_MASK;
+	pci_pot[0].pobar = (CONFIG_SYS_PCI_MEM_PHYS >> 12) & POBAR_BA_MASK;
 	pci_pot[0].pocmr = POCMR_EN | POCMR_PRE | POCMR_CM_256M;
 
 	/* PCI IO space */
-	pci_pot[1].potar = (CFG_PCI_IO_BASE >> 12) & POTAR_TA_MASK;
-	pci_pot[1].pobar = (CFG_PCI_IO_PHYS >> 12) & POBAR_BA_MASK;
+	pci_pot[1].potar = (CONFIG_SYS_PCI_IO_BASE >> 12) & POTAR_TA_MASK;
+	pci_pot[1].pobar = (CONFIG_SYS_PCI_IO_PHYS >> 12) & POBAR_BA_MASK;
 	pci_pot[1].pocmr = POCMR_EN | POCMR_IO | POCMR_CM_16M;
 
 	/* PCI mmio - non-prefetch mem space */
-	pci_pot[2].potar = (CFG_PCI_MMIO_BASE >> 12) & POTAR_TA_MASK;
-	pci_pot[2].pobar = (CFG_PCI_MMIO_PHYS >> 12) & POBAR_BA_MASK;
+	pci_pot[2].potar = (CONFIG_SYS_PCI_MMIO_BASE >> 12) & POTAR_TA_MASK;
+	pci_pot[2].pobar = (CONFIG_SYS_PCI_MMIO_PHYS >> 12) & POBAR_BA_MASK;
 	pci_pot[2].pocmr = POCMR_EN | POCMR_CM_256M;
 
 	/*
@@ -129,23 +129,23 @@ pci_init_board(void)
 
 	/* PCI memory prefetch space */
 	pci_set_region(hose->regions + 0,
-		       CFG_PCI_MEM_BASE,
-		       CFG_PCI_MEM_PHYS,
-		       CFG_PCI_MEM_SIZE,
+		       CONFIG_SYS_PCI_MEM_BASE,
+		       CONFIG_SYS_PCI_MEM_PHYS,
+		       CONFIG_SYS_PCI_MEM_SIZE,
 		       PCI_REGION_MEM|PCI_REGION_PREFETCH);
 
 	/* PCI memory space */
 	pci_set_region(hose->regions + 1,
-		       CFG_PCI_MMIO_BASE,
-		       CFG_PCI_MMIO_PHYS,
-		       CFG_PCI_MMIO_SIZE,
+		       CONFIG_SYS_PCI_MMIO_BASE,
+		       CONFIG_SYS_PCI_MMIO_PHYS,
+		       CONFIG_SYS_PCI_MMIO_SIZE,
 		       PCI_REGION_MEM);
 
 	/* PCI IO space */
 	pci_set_region(hose->regions + 2,
-		       CFG_PCI_IO_BASE,
-		       CFG_PCI_IO_PHYS,
-		       CFG_PCI_IO_SIZE,
+		       CONFIG_SYS_PCI_IO_BASE,
+		       CONFIG_SYS_PCI_IO_PHYS,
+		       CONFIG_SYS_PCI_IO_SIZE,
 		       PCI_REGION_IO);
 
 	/* System memory space */
@@ -158,8 +158,8 @@ pci_init_board(void)
 	hose->region_count = 4;
 
 	pci_setup_indirect(hose,
-			   (CFG_IMMR + 0x8300),
-			   (CFG_IMMR + 0x8304));
+			   (CONFIG_SYS_IMMR + 0x8300),
+			   (CONFIG_SYS_IMMR + 0x8304));
 
 	pci_register_hose(hose);
 
diff --git a/board/ads5121/u-boot.lds b/board/ads5121/u-boot.lds
index f2f6e149c..a059033b9 100644
--- a/board/ads5121/u-boot.lds
+++ b/board/ads5121/u-boot.lds
@@ -115,6 +115,7 @@ SECTIONS
    *(.dynbss)
    *(.bss)
    *(COMMON)
+   . = ALIGN(4);
   }
   _end = . ;
   PROVIDE (end = .);
diff --git a/board/afeb9260/Makefile b/board/afeb9260/Makefile
new file mode 100644
index 000000000..60c4304c1
--- /dev/null
+++ b/board/afeb9260/Makefile
@@ -0,0 +1,56 @@
+#
+# (C) Copyright 2003-2008
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# (C) Copyright 2008
+# Stelian Pop <stelian.pop@leadtechdesign.com>
+# Lead Tech Design <www.leadtechdesign.com>
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= $(obj)lib$(BOARD).a
+
+COBJS-y	+= afeb9260.o
+COBJS-y	+= partition.o
+COBJS-$(CONFIG_CMD_NAND) += nand.o
+
+SRCS	:= $(SOBJS:.o=.S) $(COBJS-y:.o=.c)
+OBJS	:= $(addprefix $(obj),$(COBJS-y))
+SOBJS	:= $(addprefix $(obj),$(SOBJS))
+
+$(LIB):	$(obj).depend $(OBJS) $(SOBJS)
+	$(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+
+clean:
+	rm -f $(SOBJS) $(OBJS)
+
+distclean:	clean
+	rm -f $(LIB) core *.bak .depend
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/afeb9260/afeb9260.c b/board/afeb9260/afeb9260.c
new file mode 100644
index 000000000..32445ab74
--- /dev/null
+++ b/board/afeb9260/afeb9260.c
@@ -0,0 +1,243 @@
+/*
+ * (C) Copyright 2007-2008
+ * Stelian Pop <stelian.pop@leadtechdesign.com>
+ * Lead Tech Design <www.leadtechdesign.com>
+ * (C) Copyright 2008 Sergey Lapin <slapin@ossfans.org>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/arch/at91sam9260.h>
+#include <asm/arch/at91sam9260_matrix.h>
+#include <asm/arch/at91sam9_smc.h>
+#include <asm/arch/at91_pmc.h>
+#include <asm/arch/at91_rstc.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/io.h>
+#include <asm/arch/hardware.h>
+#if defined(CONFIG_RESET_PHY_R) && defined(CONFIG_MACB)
+#include <netdev.h>
+#include <net.h>
+#endif
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/* ------------------------------------------------------------------------- */
+/*
+ * Miscelaneous platform dependent initialisations
+ */
+
+static void afeb9260_serial_hw_init(void)
+{
+#ifdef CONFIG_USART0
+	at91_set_A_periph(AT91_PIN_PB4, 1);		/* TXD0 */
+	at91_set_A_periph(AT91_PIN_PB5, 0);		/* RXD0 */
+	at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9260_ID_US0);
+#endif
+
+#ifdef CONFIG_USART1
+	at91_set_A_periph(AT91_PIN_PB6, 1);		/* TXD1 */
+	at91_set_A_periph(AT91_PIN_PB7, 0);		/* RXD1 */
+	at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9260_ID_US1);
+#endif
+
+#ifdef CONFIG_USART2
+	at91_set_A_periph(AT91_PIN_PB8, 1);		/* TXD2 */
+	at91_set_A_periph(AT91_PIN_PB9, 0);		/* RXD2 */
+	at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9260_ID_US2);
+#endif
+
+#ifdef CONFIG_USART3	/* DBGU */
+	at91_set_A_periph(AT91_PIN_PB14, 0);		/* DRXD */
+	at91_set_A_periph(AT91_PIN_PB15, 1);		/* DTXD */
+	at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_SYS);
+#endif
+}
+
+static void afeb9260_nand_hw_init(void)
+{
+	unsigned long csa;
+
+	/* Enable CS3 */
+	csa = at91_sys_read(AT91_MATRIX_EBICSA);
+	at91_sys_write(AT91_MATRIX_EBICSA,
+		       csa | AT91_MATRIX_CS3A_SMC_SMARTMEDIA);
+
+	/* Configure SMC CS3 for NAND/SmartMedia */
+	at91_sys_write(AT91_SMC_SETUP(3),
+		       AT91_SMC_NWESETUP_(0) | AT91_SMC_NCS_WRSETUP_(0) |
+		       AT91_SMC_NRDSETUP_(0) | AT91_SMC_NCS_RDSETUP_(0));
+	at91_sys_write(AT91_SMC_PULSE(3),
+		       AT91_SMC_NWEPULSE_(3) | AT91_SMC_NCS_WRPULSE_(3) |
+		       AT91_SMC_NRDPULSE_(3) | AT91_SMC_NCS_RDPULSE_(3));
+	at91_sys_write(AT91_SMC_CYCLE(3),
+		       AT91_SMC_NWECYCLE_(5) | AT91_SMC_NRDCYCLE_(5));
+	at91_sys_write(AT91_SMC_MODE(3),
+		       AT91_SMC_READMODE | AT91_SMC_WRITEMODE |
+		       AT91_SMC_EXNWMODE_DISABLE |
+		       AT91_SMC_DBW_8 |
+		       AT91_SMC_TDF_(2));
+
+	at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9260_ID_PIOC);
+
+	/* Configure RDY/BSY */
+	at91_set_gpio_input(AT91_PIN_PC13, 1);
+
+	/* Enable NandFlash */
+	at91_set_gpio_output(AT91_PIN_PC14, 1);
+}
+
+static void afeb9260_spi_hw_init(void)
+{
+	at91_set_A_periph(AT91_PIN_PA3, 0);	/* SPI0_NPCS0 */
+	at91_set_B_periph(AT91_PIN_PC11, 0);	/* SPI0_NPCS1 */
+
+	at91_set_A_periph(AT91_PIN_PA0, 0);	/* SPI0_MISO */
+	at91_set_A_periph(AT91_PIN_PA1, 0);	/* SPI0_MOSI */
+	at91_set_A_periph(AT91_PIN_PA2, 0);	/* SPI0_SPCK */
+
+	/* Enable clock */
+	at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9260_ID_SPI0);
+}
+
+#ifdef CONFIG_MACB
+static void afeb9260_macb_hw_init(void)
+{
+	/* Enable clock */
+	at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9260_ID_EMAC);
+
+	/*
+	 * Disable pull-up on:
+	 *	RXDV (PA17) => PHY normal mode (not Test mode)
+	 *	ERX0 (PA14) => PHY ADDR0
+	 *	ERX1 (PA15) => PHY ADDR1
+	 *	ERX2 (PA25) => PHY ADDR2
+	 *	ERX3 (PA26) => PHY ADDR3
+	 *	ECRS (PA28) => PHY ADDR4  => PHYADDR = 0x0
+	 *
+	 * PHY has internal pull-down
+	 */
+	writel(pin_to_mask(AT91_PIN_PA14) |
+	       pin_to_mask(AT91_PIN_PA15) |
+	       pin_to_mask(AT91_PIN_PA17) |
+	       pin_to_mask(AT91_PIN_PA25) |
+	       pin_to_mask(AT91_PIN_PA26) |
+	       pin_to_mask(AT91_PIN_PA28),
+	       pin_to_controller(AT91_PIN_PA0) + PIO_PUDR);
+
+	/* Need to reset PHY -> 500ms reset */
+	at91_sys_write(AT91_RSTC_MR, AT91_RSTC_KEY |
+				     AT91_RSTC_ERSTL | (0x0D << 8) |
+				     AT91_RSTC_URSTEN);
+
+	at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_EXTRST);
+
+	/* Wait for end hardware reset */
+	while (!(at91_sys_read(AT91_RSTC_SR) & AT91_RSTC_NRSTL));
+
+	/* Restore NRST value */
+	at91_sys_write(AT91_RSTC_MR, AT91_RSTC_KEY |
+				     AT91_RSTC_ERSTL | (0x0 << 8) |
+				     AT91_RSTC_URSTEN);
+
+	/* Re-enable pull-up */
+	writel(pin_to_mask(AT91_PIN_PA14) |
+	       pin_to_mask(AT91_PIN_PA15) |
+	       pin_to_mask(AT91_PIN_PA17) |
+	       pin_to_mask(AT91_PIN_PA25) |
+	       pin_to_mask(AT91_PIN_PA26) |
+	       pin_to_mask(AT91_PIN_PA28),
+	       pin_to_controller(AT91_PIN_PA0) + PIO_PUER);
+
+	at91_set_A_periph(AT91_PIN_PA19, 0);	/* ETXCK_EREFCK */
+	at91_set_A_periph(AT91_PIN_PA17, 0);	/* ERXDV */
+	at91_set_A_periph(AT91_PIN_PA14, 0);	/* ERX0 */
+	at91_set_A_periph(AT91_PIN_PA15, 0);	/* ERX1 */
+	at91_set_A_periph(AT91_PIN_PA18, 0);	/* ERXER */
+	at91_set_A_periph(AT91_PIN_PA16, 0);	/* ETXEN */
+	at91_set_A_periph(AT91_PIN_PA12, 0);	/* ETX0 */
+	at91_set_A_periph(AT91_PIN_PA13, 0);	/* ETX1 */
+	at91_set_A_periph(AT91_PIN_PA21, 0);	/* EMDIO */
+	at91_set_A_periph(AT91_PIN_PA20, 0);	/* EMDC */
+
+#ifndef CONFIG_RMII
+	at91_set_B_periph(AT91_PIN_PA28, 0);	/* ECRS */
+	at91_set_B_periph(AT91_PIN_PA29, 0);	/* ECOL */
+	at91_set_B_periph(AT91_PIN_PA25, 0);	/* ERX2 */
+	at91_set_B_periph(AT91_PIN_PA26, 0);	/* ERX3 */
+	at91_set_B_periph(AT91_PIN_PA27, 0);	/* ERXCK */
+	at91_set_B_periph(AT91_PIN_PA10, 0);	/* ETX2 */
+	at91_set_B_periph(AT91_PIN_PA11, 0);	/* ETX3 */
+	at91_set_B_periph(AT91_PIN_PA22, 0);	/* ETXER */
+#endif
+
+}
+#endif
+
+int board_init(void)
+{
+	/* Enable Ctrlc */
+	console_init_f();
+
+	/* arch number of AT91SAM9260EK-Board */
+	gd->bd->bi_arch_number = MACH_TYPE_AFEB9260;
+	/* adress of boot parameters */
+	gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
+
+	afeb9260_serial_hw_init();
+#ifdef CONFIG_CMD_NAND
+	afeb9260_nand_hw_init();
+#endif
+	afeb9260_spi_hw_init();
+#ifdef CONFIG_MACB
+	afeb9260_macb_hw_init();
+#endif
+
+	return 0;
+}
+
+int dram_init(void)
+{
+	gd->bd->bi_dram[0].start = PHYS_SDRAM;
+	gd->bd->bi_dram[0].size = PHYS_SDRAM_SIZE;
+	return 0;
+}
+
+#ifdef CONFIG_RESET_PHY_R
+void reset_phy(void)
+{
+#ifdef CONFIG_MACB
+	/*
+	 * Initialize ethernet HW addr prior to starting Linux,
+	 * needed for nfsroot
+	 */
+	eth_init(gd->bd);
+#endif
+}
+#endif
+
+int board_eth_init(bd_t *bis)
+{
+	int rc = 0;
+#ifdef CONFIG_MACB
+	rc = macb_eth_initialize(0, (void *)AT91SAM9260_BASE_EMAC, 0x00);
+#endif
+	return rc;
+}
diff --git a/board/afeb9260/config.mk b/board/afeb9260/config.mk
new file mode 100644
index 000000000..9ce161e55
--- /dev/null
+++ b/board/afeb9260/config.mk
@@ -0,0 +1 @@
+TEXT_BASE = 0x21f00000
diff --git a/board/afeb9260/nand.c b/board/afeb9260/nand.c
new file mode 100644
index 000000000..c5ac634aa
--- /dev/null
+++ b/board/afeb9260/nand.c
@@ -0,0 +1,78 @@
+/*
+ * (C) Copyright 2007-2008
+ * Stelian Pop <stelian.pop@leadtechdesign.com>
+ * Lead Tech Design <www.leadtechdesign.com>
+ *
+ * (C) Copyright 2006 ATMEL Rousset, Lacressonniere Nicolas
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/arch/at91sam9260.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/at91_pio.h>
+
+#include <nand.h>
+
+/*
+ *	hardware specific access to control-lines
+ */
+#define	MASK_ALE	(1 << 21)	/* our ALE is AD21 */
+#define	MASK_CLE	(1 << 22)	/* our CLE is AD22 */
+
+static void at91sam9260ek_nand_hwcontrol(struct mtd_info *mtd,
+					 int cmd, unsigned int ctrl)
+{
+	struct nand_chip *this = mtd->priv;
+
+	if (ctrl & NAND_CTRL_CHANGE) {
+		ulong IO_ADDR_W = (ulong) this->IO_ADDR_W;
+		IO_ADDR_W &= ~(MASK_ALE | MASK_CLE);
+
+		if (ctrl & NAND_CLE)
+			IO_ADDR_W |= MASK_CLE;
+		if (ctrl & NAND_ALE)
+			IO_ADDR_W |= MASK_ALE;
+
+		at91_set_gpio_value(AT91_PIN_PC14, !(ctrl & NAND_NCE));
+		this->IO_ADDR_W = (void *) IO_ADDR_W;
+	}
+
+	if (cmd != NAND_CMD_NONE)
+		writeb(cmd, this->IO_ADDR_W);
+}
+
+static int at91sam9260ek_nand_ready(struct mtd_info *mtd)
+{
+	return at91_get_gpio_value(AT91_PIN_PC13);
+}
+
+int board_nand_init(struct nand_chip *nand)
+{
+	nand->ecc.mode = NAND_ECC_SOFT;
+#ifdef CONFIG_SYS_NAND_DBW_16
+	nand->options = NAND_BUSWIDTH_16;
+#endif
+	nand->cmd_ctrl = at91sam9260ek_nand_hwcontrol;
+	nand->dev_ready = at91sam9260ek_nand_ready;
+	nand->chip_delay = 20;
+
+	return 0;
+}
diff --git a/board/afeb9260/partition.c b/board/afeb9260/partition.c
new file mode 100644
index 000000000..be08f295f
--- /dev/null
+++ b/board/afeb9260/partition.c
@@ -0,0 +1,36 @@
+/*
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+#include <common.h>
+#include <config.h>
+#include <asm/hardware.h>
+#include <dataflash.h>
+
+AT91S_DATAFLASH_INFO dataflash_info[CONFIG_SYS_MAX_DATAFLASH_BANKS];
+
+struct dataflash_addr cs[CONFIG_SYS_MAX_DATAFLASH_BANKS] = {
+	{CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0, 0},	/* Logical adress, CS */
+	{CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS1, 1}
+};
+
+/*define the area offsets*/
+dataflash_protect_t area_list[NB_DATAFLASH_AREA] = {
+	{0x00000000, 0x000041FF, FLAG_PROTECT_CLEAR, 0, "Bootstrap"},
+	{0x00004200, 0x000083FF, FLAG_PROTECT_CLEAR, 0, "Environment"},
+	{0x00008400, 0x00041FFF, FLAG_PROTECT_CLEAR, 0, "U-Boot"},
+};
diff --git a/board/alaska/alaska.c b/board/alaska/alaska.c
index 49a8f712b..33b4a6ee4 100644
--- a/board/alaska/alaska.c
+++ b/board/alaska/alaska.c
@@ -32,48 +32,48 @@ void setupBat (ulong size)
 	int blocksize = 0;
 
 	/* Flash 0 */
-#if defined (CFG_AMD_BOOT)
-	batu = CFG_FLASH0_BASE | (BL_512K << 2) | BPP_RW | BPP_RX;
+#if defined (CONFIG_SYS_AMD_BOOT)
+	batu = CONFIG_SYS_FLASH0_BASE | (BL_512K << 2) | BPP_RW | BPP_RX;
 #else
-	batu = CFG_FLASH0_BASE | (BL_16M << 2) | BPP_RW | BPP_RX;
+	batu = CONFIG_SYS_FLASH0_BASE | (BL_16M << 2) | BPP_RW | BPP_RX;
 #endif
-	batl = CFG_FLASH0_BASE | 0x22;
+	batl = CONFIG_SYS_FLASH0_BASE | 0x22;
 	write_bat (IBAT0, batu, batl);
 	write_bat (DBAT0, batu, batl);
 
 	/* Flash 1 */
-#if defined (CFG_AMD_BOOT)
-	batu = CFG_FLASH1_BASE | (BL_16M << 2) | BPP_RW | BPP_RX;
+#if defined (CONFIG_SYS_AMD_BOOT)
+	batu = CONFIG_SYS_FLASH1_BASE | (BL_16M << 2) | BPP_RW | BPP_RX;
 #else
-	batu = CFG_FLASH1_BASE | (BL_512K << 2) | BPP_RW | BPP_RX;
+	batu = CONFIG_SYS_FLASH1_BASE | (BL_512K << 2) | BPP_RW | BPP_RX;
 #endif
-	batl = CFG_FLASH1_BASE | 0x22;
+	batl = CONFIG_SYS_FLASH1_BASE | 0x22;
 	write_bat (IBAT1, batu, batl);
 	write_bat (DBAT1, batu, batl);
 
 	/* CPLD */
-	batu = CFG_CPLD_BASE | (BL_512K << 2) | BPP_RW | BPP_RX;
-	batl = CFG_CPLD_BASE | 0x22;
+	batu = CONFIG_SYS_CPLD_BASE | (BL_512K << 2) | BPP_RW | BPP_RX;
+	batl = CONFIG_SYS_CPLD_BASE | 0x22;
 	write_bat (IBAT2, 0, 0);
 	write_bat (DBAT2, batu, batl);
 
 	/* FPGA */
-	batu = CFG_FPGA_BASE | (BL_512K << 2) | BPP_RW | BPP_RX;
-	batl = CFG_FPGA_BASE | 0x22;
+	batu = CONFIG_SYS_FPGA_BASE | (BL_512K << 2) | BPP_RW | BPP_RX;
+	batl = CONFIG_SYS_FPGA_BASE | 0x22;
 	write_bat (IBAT3, 0, 0);
 	write_bat (DBAT3, batu, batl);
 
 	/* MBAR - Data only */
-	batu = CFG_MBAR | BPP_RW | BPP_RX;
-	batl = CFG_MBAR | 0x22;
+	batu = CONFIG_SYS_MBAR | BPP_RW | BPP_RX;
+	batl = CONFIG_SYS_MBAR | 0x22;
 	mtspr (IBAT4L, 0);
 	mtspr (IBAT4U, 0);
 	mtspr (DBAT4L, batl);
 	mtspr (DBAT4U, batu);
 
 	/* MBAR - SRAM */
-	batu = CFG_SRAM_BASE | BPP_RW | BPP_RX;
-	batl = CFG_SRAM_BASE | 0x42;
+	batu = CONFIG_SYS_SRAM_BASE | BPP_RW | BPP_RX;
+	batl = CONFIG_SYS_SRAM_BASE | 0x42;
 	mtspr (IBAT5L, batl);
 	mtspr (IBAT5U, batu);
 	mtspr (DBAT5L, batl);
@@ -93,8 +93,8 @@ void setupBat (ulong size)
 		blocksize = BL_256M << 2;
 
 	/* Memory */
-	batu = CFG_SDRAM_BASE | blocksize | BPP_RW | BPP_RX;
-	batl = CFG_SDRAM_BASE | 0x42;
+	batu = CONFIG_SYS_SDRAM_BASE | blocksize | BPP_RW | BPP_RX;
+	batl = CONFIG_SYS_SDRAM_BASE | 0x42;
 	mtspr (IBAT6L, batl);
 	mtspr (IBAT6U, batu);
 	mtspr (DBAT6L, batl);
@@ -120,9 +120,9 @@ void setupBat (ulong size)
 		else if (size <= 0x10000000)	/* 256MB */
 			blocksize = BL_256M << 2;
 
-		batu = (CFG_SDRAM_BASE +
+		batu = (CONFIG_SYS_SDRAM_BASE +
 			0x10000000) | blocksize | BPP_RW | BPP_RX;
-		batl = (CFG_SDRAM_BASE + 0x10000000) | 0x42;
+		batl = (CONFIG_SYS_SDRAM_BASE + 0x10000000) | 0x42;
 	}
 
 	mtspr (IBAT7L, batl);
diff --git a/board/alaska/flash.c b/board/alaska/flash.c
index 715616063..aed3b6f59 100644
--- a/board/alaska/flash.c
+++ b/board/alaska/flash.c
@@ -28,7 +28,7 @@
 #include <linux/byteorder/swab.h>
 
 
-flash_info_t flash_info[CFG_MAX_FLASH_BANKS];	/* info for FLASH chips    */
+flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];	/* info for FLASH chips    */
 
 /* Board support for 1 or 2 flash devices */
 #define FLASH_PORT_WIDTH8
@@ -86,30 +86,30 @@ unsigned long flash_init (void)
 	ulong size = 0;
 	ulong fsize = 0;
 
-	for (i = 0; i < CFG_MAX_FLASH_BANKS; i++) {
+	for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) {
 		memset (&flash_info[i], 0, sizeof (flash_info_t));
 
 		switch (i) {
 		case 0:
-			flash_get_size ((FPW *) CFG_FLASH1_BASE,
+			flash_get_size ((FPW *) CONFIG_SYS_FLASH1_BASE,
 					&flash_info[i]);
-			flash_get_offsets (CFG_FLASH1_BASE, &flash_info[i]);
+			flash_get_offsets (CONFIG_SYS_FLASH1_BASE, &flash_info[i]);
 			break;
 		case 1:
-			flash_get_size ((FPW *) CFG_FLASH1_BASE,
+			flash_get_size ((FPW *) CONFIG_SYS_FLASH1_BASE,
 					&flash_info[i]);
-			fsize = CFG_FLASH1_BASE + flash_info[i - 1].size;
+			fsize = CONFIG_SYS_FLASH1_BASE + flash_info[i - 1].size;
 			flash_get_offsets (fsize, &flash_info[i]);
 			break;
 		case 2:
-			flash_get_size ((FPW *) CFG_FLASH0_BASE,
+			flash_get_size ((FPW *) CONFIG_SYS_FLASH0_BASE,
 					&flash_info[i]);
-			flash_get_offsets (CFG_FLASH0_BASE, &flash_info[i]);
+			flash_get_offsets (CONFIG_SYS_FLASH0_BASE, &flash_info[i]);
 			break;
 		case 3:
-			flash_get_size ((FPW *) CFG_FLASH0_BASE,
+			flash_get_size ((FPW *) CONFIG_SYS_FLASH0_BASE,
 					&flash_info[i]);
-			fsize = CFG_FLASH0_BASE + flash_info[i - 1].size;
+			fsize = CONFIG_SYS_FLASH0_BASE + flash_info[i - 1].size;
 			flash_get_offsets (fsize, &flash_info[i]);
 			break;
 		default:
@@ -124,31 +124,31 @@ unsigned long flash_init (void)
 
 	/* Protect monitor and environment sectors
 	 */
-#if defined (CFG_AMD_BOOT)
+#if defined (CONFIG_SYS_AMD_BOOT)
 	flash_protect (FLAG_PROTECT_SET,
-		       CFG_MONITOR_BASE,
-		       CFG_MONITOR_BASE + monitor_flash_len - 1,
+		       CONFIG_SYS_MONITOR_BASE,
+		       CONFIG_SYS_MONITOR_BASE + monitor_flash_len - 1,
 		       &flash_info[2]);
 	flash_protect (FLAG_PROTECT_SET,
-		       CFG_INTEL_BASE,
-		       CFG_INTEL_BASE + monitor_flash_len - 1,
+		       CONFIG_SYS_INTEL_BASE,
+		       CONFIG_SYS_INTEL_BASE + monitor_flash_len - 1,
 		       &flash_info[1]);
 #else
 	flash_protect (FLAG_PROTECT_SET,
-		       CFG_MONITOR_BASE,
-		       CFG_MONITOR_BASE + monitor_flash_len - 1,
+		       CONFIG_SYS_MONITOR_BASE,
+		       CONFIG_SYS_MONITOR_BASE + monitor_flash_len - 1,
 		       &flash_info[3]);
 	flash_protect (FLAG_PROTECT_SET,
-		       CFG_AMD_BASE,
-		       CFG_AMD_BASE + monitor_flash_len - 1, &flash_info[0]);
+		       CONFIG_SYS_AMD_BASE,
+		       CONFIG_SYS_AMD_BASE + monitor_flash_len - 1, &flash_info[0]);
 #endif
 
 	flash_protect (FLAG_PROTECT_SET,
-		       CFG_ENV1_ADDR,
-		       CFG_ENV1_ADDR + CFG_ENV1_SIZE - 1, &flash_info[1]);
+		       CONFIG_ENV1_ADDR,
+		       CONFIG_ENV1_ADDR + CONFIG_ENV1_SIZE - 1, &flash_info[1]);
 	flash_protect (FLAG_PROTECT_SET,
-		       CFG_ENV_ADDR,
-		       CFG_ENV_ADDR + CFG_ENV_SIZE - 1, &flash_info[3]);
+		       CONFIG_ENV_ADDR,
+		       CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1, &flash_info[3]);
 
 	return size;
 }
@@ -294,10 +294,10 @@ static ulong flash_get_size (FPW * addr, flash_info_t * info)
 		break;
 	}
 
-	if (info->sector_count > CFG_MAX_FLASH_SECT) {
+	if (info->sector_count > CONFIG_SYS_MAX_FLASH_SECT) {
 		printf ("** ERROR: sector count %d > max (%d) **\n",
-			info->sector_count, CFG_MAX_FLASH_SECT);
-		info->sector_count = CFG_MAX_FLASH_SECT;
+			info->sector_count, CONFIG_SYS_MAX_FLASH_SECT);
+		info->sector_count = CONFIG_SYS_MAX_FLASH_SECT;
 	}
 
 	if (value == (FPW) INTEL_ID_28F128J3A)
@@ -348,7 +348,7 @@ static unsigned char intel_sector_protected (flash_info_t *info, ushort sector)
 	/*
 	 * first, wait for the WSM to be finished. The rationale for
 	 * waiting for the WSM to become idle for at most
-	 * CFG_FLASH_ERASE_TOUT is as follows. The WSM can be busy
+	 * CONFIG_SYS_FLASH_ERASE_TOUT is as follows. The WSM can be busy
 	 * because of: (1) erase, (2) program or (3) lock bit
 	 * configuration. So we just wait for the longest timeout of
 	 * the (1)-(3), i.e. the erase timeout.
@@ -361,7 +361,7 @@ static unsigned char intel_sector_protected (flash_info_t *info, ushort sector)
 
 	start = get_timer (0);
 	while ((*addr & (FPW) INTEL_FINISHED) != (FPW) INTEL_FINISHED) {
-		if (get_timer (start) > CFG_FLASH_ERASE_TOUT) {
+		if (get_timer (start) > CONFIG_SYS_FLASH_ERASE_TOUT) {
 			*addr = (FPW) INTEL_RESET; /* restore read mode */
 			printf("WSM busy too long, can't get prot status\n");
 			return 1;
@@ -391,7 +391,7 @@ static unsigned char intel_sector_protected (flash_info_t *info, ushort sector)
  */
 static unsigned char same_chip_banks (int bank1, int bank2)
 {
-	unsigned char same_chip[CFG_MAX_FLASH_BANKS][CFG_MAX_FLASH_BANKS] = {
+	unsigned char same_chip[CONFIG_SYS_MAX_FLASH_BANKS][CONFIG_SYS_MAX_FLASH_BANKS] = {
 		{1, 1, 0, 0},
 		{1, 1, 0, 0},
 		{0, 0, 1, 1},
@@ -467,7 +467,7 @@ int flash_erase (flash_info_t * info, int s_first, int s_last)
 			} else {
 				FPWV *base;	/* first address in bank */
 
-				base = (FPWV *) (CFG_AMD_BASE);
+				base = (FPWV *) (CONFIG_SYS_AMD_BASE);
 				base[FLASH_CYCLE1] = (FPW) 0x00AA00AA;	/* unlock */
 				base[FLASH_CYCLE2] = (FPW) 0x00550055;	/* unlock */
 				base[FLASH_CYCLE1] = (FPW) 0x00800080;	/* erase mode */
@@ -479,7 +479,7 @@ int flash_erase (flash_info_t * info, int s_first, int s_last)
 			while (((status =
 				 *addr) & (FPW) 0x00800080) !=
 			       (FPW) 0x00800080) {
-				if (get_timer (start) > CFG_FLASH_ERASE_TOUT) {
+				if (get_timer (start) > CONFIG_SYS_FLASH_ERASE_TOUT) {
 					printf ("Timeout\n");
 					if (intel) {
 						*addr = (FPW) 0x00B000B0;	/* suspend erase     */
@@ -684,7 +684,7 @@ static int write_data (flash_info_t * info, ulong dest, FPW data)
 
 	/* wait while polling the status register */
 	while ((*addr & (FPW) 0x00800080) != (FPW) 0x00800080) {
-		if (get_timer (start) > CFG_FLASH_WRITE_TOUT) {
+		if (get_timer (start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
 			*addr = (FPW) 0x00FF00FF;	/* restore read mode */
 			return (1);
 		}
@@ -728,7 +728,7 @@ static int write_data_block (flash_info_t * info, ulong src, ulong dest)
 
 	/* wait while polling the status register */
 	while ((*dstaddr & (FPW) 0x00800080) != (FPW) 0x00800080) {
-		if (get_timer (start) > CFG_FLASH_WRITE_TOUT) {
+		if (get_timer (start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
 			*dstaddr = (FPW) 0x00FF00FF;	/* restore read mode */
 			return (1);
 		}
@@ -746,7 +746,7 @@ static int write_data_block (flash_info_t * info, ulong src, ulong dest)
 
 	/* wait while polling the status register */
 	while ((*dstaddr & (FPW) 0x00800080) != (FPW) 0x00800080) {
-		if (get_timer (start) > CFG_FLASH_WRITE_TOUT) {
+		if (get_timer (start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
 			*dstaddr = (FPW) 0x00FF00FF;	/* restore read mode */
 			return (1);
 		}
@@ -779,7 +779,7 @@ static int write_word_amd (flash_info_t * info, FPWV * dest, FPW data)
 		return (2);
 	}
 
-	base = (FPWV *) (CFG_AMD_BASE);
+	base = (FPWV *) (CONFIG_SYS_AMD_BASE);
 
 	/* Disable interrupts which might cause a timeout here */
 	flag = disable_interrupts ();
@@ -799,7 +799,7 @@ static int write_word_amd (flash_info_t * info, FPWV * dest, FPW data)
 	/* data polling for D7 */
 	while (res == 0
 	       && (*dest & (FPW) 0x00800080) != (data & (FPW) 0x00800080)) {
-		if (get_timer (start) > CFG_FLASH_WRITE_TOUT) {
+		if (get_timer (start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
 			*dest = (FPW) 0x00F000F0;	/* reset bank */
 			res = 1;
 		}
@@ -856,7 +856,7 @@ int flash_real_protect (flash_info_t * info, long sector, int prot)
 	start = get_timer (0);
 
 	while ((*addr & INTEL_FINISHED) != INTEL_FINISHED) {
-		if (get_timer (start) > CFG_FLASH_UNLOCK_TOUT) {
+		if (get_timer (start) > CONFIG_SYS_FLASH_UNLOCK_TOUT) {
 			printf ("Flash lock bit operation timed out\n");
 			rc = 1;
 			break;
@@ -886,17 +886,17 @@ int flash_real_protect (flash_info_t * info, long sector, int prot)
 		 */
 
 		/* find the current bank number */
-		curr_bank = CFG_MAX_FLASH_BANKS + 1;
-		for (j = 0; j < CFG_MAX_FLASH_BANKS; ++j) {
+		curr_bank = CONFIG_SYS_MAX_FLASH_BANKS + 1;
+		for (j = 0; j < CONFIG_SYS_MAX_FLASH_BANKS; ++j) {
 			if (&flash_info[j] == info) {
 				curr_bank = j;
 			}
 		}
-		if (curr_bank == CFG_MAX_FLASH_BANKS + 1) {
+		if (curr_bank == CONFIG_SYS_MAX_FLASH_BANKS + 1) {
 			printf("Error: can't determine bank number!\n");
 		}
 
-		for (bank = 0; bank < CFG_MAX_FLASH_BANKS; ++bank) {
+		for (bank = 0; bank < CONFIG_SYS_MAX_FLASH_BANKS; ++bank) {
 			if (!same_chip_banks(curr_bank, bank)) {
 				continue;
 			}
@@ -910,7 +910,7 @@ int flash_real_protect (flash_info_t * info, long sector, int prot)
 					while ((*addr & INTEL_FINISHED) !=
 					       INTEL_FINISHED) {
 						if (get_timer (start) >
-						    CFG_FLASH_UNLOCK_TOUT) {
+						    CONFIG_SYS_FLASH_UNLOCK_TOUT) {
 							printf ("Flash lock bit operation timed out\n");
 							rc = 1;
 							break;
diff --git a/board/altera/common/AMDLV065D.c b/board/altera/common/AMDLV065D.c
index 8a7b14ee2..0fcf354cd 100644
--- a/board/altera/common/AMDLV065D.c
+++ b/board/altera/common/AMDLV065D.c
@@ -30,7 +30,7 @@
 #endif
 
 #define SECTSZ		(64 * 1024)
-flash_info_t flash_info[CFG_MAX_FLASH_BANKS];
+flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];
 
 /*----------------------------------------------------------------------*/
 unsigned long flash_init (void)
@@ -39,18 +39,18 @@ unsigned long flash_init (void)
 	unsigned long addr;
 	flash_info_t *fli = &flash_info[0];
 
-	fli->size = CFG_FLASH_SIZE;
-	fli->sector_count = CFG_MAX_FLASH_SECT;
+	fli->size = CONFIG_SYS_FLASH_SIZE;
+	fli->sector_count = CONFIG_SYS_MAX_FLASH_SECT;
 	fli->flash_id = FLASH_MAN_AMD + FLASH_AMDLV065D;
 
-	addr = CFG_FLASH_BASE;
+	addr = CONFIG_SYS_FLASH_BASE;
 	for (i = 0; i < fli->sector_count; ++i) {
 		fli->start[i] = addr;
 		addr += SECTSZ;
 		fli->protect[i] = 1;
 	}
 
-	return (CFG_FLASH_SIZE);
+	return (CONFIG_SYS_FLASH_SIZE);
 }
 /*--------------------------------------------------------------------*/
 void flash_print_info (flash_info_t * info)
@@ -135,7 +135,7 @@ int flash_erase (flash_info_t * info, int s_first, int s_last)
 			while ( readb (addr2) != 0xff) {
 				udelay (1000 * 1000);
 				putc ('.');
-				if (get_timer (start) > CFG_FLASH_ERASE_TOUT) {
+				if (get_timer (start) > CONFIG_SYS_FLASH_ERASE_TOUT) {
 					printf ("timeout\n");
 					return 1;
 				}
@@ -177,7 +177,7 @@ int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
 		/* Verify write */
 		start = get_timer (0);
 		while (readb (dst) != b) {
-			if (get_timer (start) > CFG_FLASH_WRITE_TOUT) {
+			if (get_timer (start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
 				return 1;
 			}
 		}
diff --git a/board/altera/common/epled.c b/board/altera/common/epled.c
index c75fe8c57..e5e770576 100644
--- a/board/altera/common/epled.c
+++ b/board/altera/common/epled.c
@@ -33,7 +33,7 @@ static led_id_t val = 0;
 
 void __led_init (led_id_t mask, int state)
 {
-	nios_pio_t *pio = (nios_pio_t *)CFG_LEDPIO_ADDR;
+	nios_pio_t *pio = (nios_pio_t *)CONFIG_SYS_LEDPIO_ADDR;
 
 	if (state == STATUS_LED_ON)
 		val &= ~mask;
@@ -44,7 +44,7 @@ void __led_init (led_id_t mask, int state)
 
 void __led_set (led_id_t mask, int state)
 {
-	nios_pio_t *pio = (nios_pio_t *)CFG_LEDPIO_ADDR;
+	nios_pio_t *pio = (nios_pio_t *)CONFIG_SYS_LEDPIO_ADDR;
 
 	if (state == STATUS_LED_ON)
 		val &= ~mask;
@@ -55,7 +55,7 @@ void __led_set (led_id_t mask, int state)
 
 void __led_toggle (led_id_t mask)
 {
-	nios_pio_t *pio = (nios_pio_t *)CFG_LEDPIO_ADDR;
+	nios_pio_t *pio = (nios_pio_t *)CONFIG_SYS_LEDPIO_ADDR;
 
 	val ^= mask;
 	writel (&pio->data, val);
diff --git a/board/altera/common/flash.c b/board/altera/common/flash.c
index 2638ea899..83bb7c222 100644
--- a/board/altera/common/flash.c
+++ b/board/altera/common/flash.c
@@ -25,7 +25,7 @@
 #include <common.h>
 #include <nios.h>
 
-flash_info_t flash_info[CFG_MAX_FLASH_BANKS];
+flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];
 
 /*--------------------------------------------------------------------*/
 void flash_print_info (flash_info_t * info)
@@ -68,8 +68,8 @@ void flash_print_info (flash_info_t * info)
 
 int flash_erase (flash_info_t * info, int s_first, int s_last)
 {
-	volatile CFG_FLASH_WORD_SIZE *addr = (CFG_FLASH_WORD_SIZE *) (info->start[0]);
-	volatile CFG_FLASH_WORD_SIZE *addr2;
+	volatile CONFIG_SYS_FLASH_WORD_SIZE *addr = (CONFIG_SYS_FLASH_WORD_SIZE *) (info->start[0]);
+	volatile CONFIG_SYS_FLASH_WORD_SIZE *addr2;
 	int prot, sect;
 	unsigned oldpri;
 	ulong start;
@@ -112,7 +112,7 @@ int flash_erase (flash_info_t * info, int s_first, int s_last)
 	 */
 	for (sect = s_first; sect <= s_last; sect++) {
 		if (info->protect[sect] == 0) {	/* not protected */
-			addr2 = (CFG_FLASH_WORD_SIZE *) (info->start[sect]);
+			addr2 = (CONFIG_SYS_FLASH_WORD_SIZE *) (info->start[sect]);
 			*addr = 0xaa;
 			*addr = 0x55;
 			*addr = 0x80;
@@ -128,7 +128,7 @@ int flash_erase (flash_info_t * info, int s_first, int s_last)
 			while (*addr2 != 0xff) {
 				udelay (1000 * 1000);
 				putc ('.');
-				if (get_timer (start) > CFG_FLASH_ERASE_TOUT) {
+				if (get_timer (start) > CONFIG_SYS_FLASH_ERASE_TOUT) {
 					printf ("timeout\n");
 					return 1;
 				}
@@ -181,7 +181,7 @@ int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
 		/* Verify write */
 		start = get_timer (0);
 		while (*dst != b) {
-			if (get_timer (start) > CFG_FLASH_WRITE_TOUT) {
+			if (get_timer (start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
 				ipri (oldpri);
 				return 1;
 			}
diff --git a/board/altera/dk1c20/dk1c20.c b/board/altera/dk1c20/dk1c20.c
index 46695bea9..11c19b7ee 100644
--- a/board/altera/dk1c20/dk1c20.c
+++ b/board/altera/dk1c20/dk1c20.c
@@ -58,9 +58,9 @@ phys_size_t initdram (int board_type)
 #if defined(CONFIG_CMD_IDE)
 int ide_preinit (void)
 {
-	nios_pio_t *present = (nios_pio_t *) CFG_CF_PRESENT;
-	nios_pio_t *power = (nios_pio_t *) CFG_CF_POWER;
-	nios_pio_t *atasel = (nios_pio_t *) CFG_CF_ATASEL;
+	nios_pio_t *present = (nios_pio_t *) CONFIG_SYS_CF_PRESENT;
+	nios_pio_t *power = (nios_pio_t *) CONFIG_SYS_CF_POWER;
+	nios_pio_t *atasel = (nios_pio_t *) CONFIG_SYS_CF_ATASEL;
 
 	/* setup data direction registers */
 	present->direction = NIOS_PIO_IN;
diff --git a/board/altera/dk1c20/flash.c b/board/altera/dk1c20/flash.c
index 1f344dd33..8bddd38e1 100644
--- a/board/altera/dk1c20/flash.c
+++ b/board/altera/dk1c20/flash.c
@@ -31,7 +31,7 @@
 #include "../common/flash.c"
 
 /*----------------------------------------------------------------------*/
-#define BANKSZ		CFG_FLASH_SIZE
+#define BANKSZ		CONFIG_SYS_FLASH_SIZE
 #define SECTSZ		(64 * 1024)
 #define USERFLASH	(2 * 1024 * 1024)	/* bottom 2 MB for user	*/
 
@@ -43,16 +43,16 @@ unsigned long flash_init (void)
 	flash_info_t *fli = &flash_info[0];
 
 	fli->size = BANKSZ;
-	fli->sector_count = CFG_MAX_FLASH_SECT;
+	fli->sector_count = CONFIG_SYS_MAX_FLASH_SECT;
 	fli->flash_id = FLASH_MAN_AMD + FLASH_AMDLV065D;
 
-	addr = CFG_FLASH_BASE;
+	addr = CONFIG_SYS_FLASH_BASE;
 	for (i = 0; i < fli->sector_count; ++i) {
 		fli->start[i] = addr;
 		addr += SECTSZ;
 
 		/* Protect all but 2 MByte user area */
-		if (addr < (CFG_FLASH_BASE + USERFLASH))
+		if (addr < (CONFIG_SYS_FLASH_BASE + USERFLASH))
 			fli->protect[i] = 0;
 		else
 			fli->protect[i] = 1;
diff --git a/board/altera/dk1s10/flash.c b/board/altera/dk1s10/flash.c
index 5c7093352..d1f2db13b 100644
--- a/board/altera/dk1s10/flash.c
+++ b/board/altera/dk1s10/flash.c
@@ -43,16 +43,16 @@ unsigned long flash_init (void)
 	flash_info_t *fli = &flash_info[0];
 
 	fli->size = BANKSZ;
-	fli->sector_count = CFG_MAX_FLASH_SECT;
+	fli->sector_count = CONFIG_SYS_MAX_FLASH_SECT;
 	fli->flash_id = FLASH_MAN_AMD + FLASH_AMDLV065D;
 
-	addr = CFG_FLASH_BASE;
+	addr = CONFIG_SYS_FLASH_BASE;
 	for (i = 0; i < fli->sector_count; ++i) {
 		fli->start[i] = addr;
 		addr += SECTSZ;
 
 		/* Protect all but 2 MByte user area */
-		if (addr < (CFG_FLASH_BASE + USERFLASH))
+		if (addr < (CONFIG_SYS_FLASH_BASE + USERFLASH))
 			fli->protect[i] = 0;
 		else
 			fli->protect[i] = 1;
diff --git a/board/altera/dk1s10/vectors.S b/board/altera/dk1s10/vectors.S
index 2f44875dc..226f65bb5 100644
--- a/board/altera/dk1s10/vectors.S
+++ b/board/altera/dk1s10/vectors.S
@@ -58,12 +58,12 @@
 	.align	4
 _vectors:
 
-#if	defined(CFG_NIOS_CPU_OCI_BASE)
+#if	defined(CONFIG_SYS_NIOS_CPU_OCI_BASE)
 	/* OCI does the reset job */
 	.long	_def_xhandler@h		/* Vector 0  - NMI / Reset */
 #else
 	/* there is no OCI, so we have to do a direct reset jump here */
-	.long	CFG_NIOS_CPU_RST_VECT	/* Vector 0  - Reset to GERMS */
+	.long	CONFIG_SYS_NIOS_CPU_RST_VECT	/* Vector 0  - Reset to GERMS */
 #endif
 	.long	_cwp_lolimit@h		/* Vector 1  - underflow */
 	.long	_cwp_hilimit@h		/* Vector 2  - overflow	*/
@@ -81,7 +81,7 @@ _vectors:
 	.long	_def_xhandler@h		/* Vector 13 - future reserved */
 	.long	_def_xhandler@h		/* Vector 14 - future reserved */
 	.long	_def_xhandler@h		/* Vector 15 - future reserved */
-#if	(CFG_NIOS_TMRIRQ == 16)
+#if	(CONFIG_SYS_NIOS_TMRIRQ == 16)
 	.long	_timebase_int@h		/* Vector 16 - lopri timer*/
 #else
 	.long	_def_xhandler@h		/* Vector 16 */
@@ -119,7 +119,7 @@ _vectors:
 	.long	_def_xhandler@h		/* Vector 47 */
 	.long	_def_xhandler@h		/* Vector 48 */
 	.long	_def_xhandler@h		/* Vector 49 */
-#if	(CFG_NIOS_TMRIRQ == 50)
+#if	(CONFIG_SYS_NIOS_TMRIRQ == 50)
 	.long	_timebase_int@h		/* Vector 50 - lopri timer*/
 #else
 	.long	_def_xhandler@h		/* Vector 50 */
diff --git a/board/amcc/acadia/acadia.c b/board/amcc/acadia/acadia.c
index 8b82ea40e..8d79be2ce 100644
--- a/board/amcc/acadia/acadia.c
+++ b/board/amcc/acadia/acadia.c
@@ -31,24 +31,24 @@ static void acadia_gpio_init(void)
 	/*
 	 * GPIO0 setup (select GPIO or alternate function)
 	 */
-	out32(GPIO0_OSRL, CFG_GPIO0_OSRL);
-	out32(GPIO0_OSRH, CFG_GPIO0_OSRH);	/* output select */
-	out32(GPIO0_ISR1L, CFG_GPIO0_ISR1L);
-	out32(GPIO0_ISR1H, CFG_GPIO0_ISR1H);	/* input select */
-	out32(GPIO0_TSRL, CFG_GPIO0_TSRL);
-	out32(GPIO0_TSRH, CFG_GPIO0_TSRH);	/* three-state select */
-	out32(GPIO0_TCR, CFG_GPIO0_TCR);  /* enable output driver for outputs */
+	out32(GPIO0_OSRL, CONFIG_SYS_GPIO0_OSRL);
+	out32(GPIO0_OSRH, CONFIG_SYS_GPIO0_OSRH);	/* output select */
+	out32(GPIO0_ISR1L, CONFIG_SYS_GPIO0_ISR1L);
+	out32(GPIO0_ISR1H, CONFIG_SYS_GPIO0_ISR1H);	/* input select */
+	out32(GPIO0_TSRL, CONFIG_SYS_GPIO0_TSRL);
+	out32(GPIO0_TSRH, CONFIG_SYS_GPIO0_TSRH);	/* three-state select */
+	out32(GPIO0_TCR, CONFIG_SYS_GPIO0_TCR);  /* enable output driver for outputs */
 
 	/*
 	 * Ultra (405EZ) was nice enough to add another GPIO controller
 	 */
-	out32(GPIO1_OSRH, CFG_GPIO1_OSRH);	/* output select */
-	out32(GPIO1_OSRL, CFG_GPIO1_OSRL);
-	out32(GPIO1_ISR1H, CFG_GPIO1_ISR1H);	/* input select */
-	out32(GPIO1_ISR1L, CFG_GPIO1_ISR1L);
-	out32(GPIO1_TSRH, CFG_GPIO1_TSRH);	/* three-state select */
-	out32(GPIO1_TSRL, CFG_GPIO1_TSRL);
-	out32(GPIO1_TCR, CFG_GPIO1_TCR);  /* enable output driver for outputs */
+	out32(GPIO1_OSRH, CONFIG_SYS_GPIO1_OSRH);	/* output select */
+	out32(GPIO1_OSRL, CONFIG_SYS_GPIO1_OSRL);
+	out32(GPIO1_ISR1H, CONFIG_SYS_GPIO1_ISR1H);	/* input select */
+	out32(GPIO1_ISR1L, CONFIG_SYS_GPIO1_ISR1L);
+	out32(GPIO1_TSRH, CONFIG_SYS_GPIO1_TSRH);	/* three-state select */
+	out32(GPIO1_TSRL, CONFIG_SYS_GPIO1_TSRL);
+	out32(GPIO1_TCR, CONFIG_SYS_GPIO1_TCR);  /* enable output driver for outputs */
 }
 
 int board_early_init_f(void)
@@ -68,7 +68,7 @@ int board_early_init_f(void)
 	mtsdr(sdrnand0, SDR_NAND0_NDEN | SDR_NAND0_NDAREN | SDR_NAND0_NDRBEN);
 	mfsdr(sdrultra0, reg);
 	reg &= ~SDR_ULTRA0_CSN_MASK;
-	reg |= (SDR_ULTRA0_CSNSEL0 >> CFG_NAND_CS) |
+	reg |= (SDR_ULTRA0_CSNSEL0 >> CONFIG_SYS_NAND_CS) |
 		SDR_ULTRA0_NDGPIOBP |
 		SDR_ULTRA0_EBCRDYEN |
 		SDR_ULTRA0_NFSRSTEN;
@@ -91,7 +91,7 @@ int board_early_init_f(void)
 int misc_init_f(void)
 {
 	/* Set EPLD to take PHY out of reset */
-	out8(CFG_CPLD_BASE + 0x05, 0x00);
+	out8(CONFIG_SYS_CPLD_BASE + 0x05, 0x00);
 	udelay(100000);
 
 	return 0;
@@ -105,7 +105,7 @@ int checkboard(void)
 	char *s = getenv("serial#");
 	u8 rev;
 
-	rev = in8(CFG_CPLD_BASE + 0);
+	rev = in8(CONFIG_SYS_CPLD_BASE + 0);
 	printf("Board: Acadia - AMCC PPC405EZ Evaluation Board, Rev. %X", rev);
 
 	if (s != NULL) {
diff --git a/board/amcc/acadia/cmd_acadia.c b/board/amcc/acadia/cmd_acadia.c
index fb7ea3595..052cf6184 100644
--- a/board/amcc/acadia/cmd_acadia.c
+++ b/board/amcc/acadia/cmd_acadia.c
@@ -84,7 +84,7 @@ static int do_bootstrap(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 
 	if (i2c_write(chip, 0, 1, buf, 16) != 0)
 		printf("Error writing to EEPROM at address 0x%x\n", chip);
-	udelay(CFG_EEPROM_PAGE_WRITE_DELAY_MS * 1000);
+	udelay(CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS * 1000);
 	if (i2c_write(chip, 0x10, 1, buf+16, 4) != 0)
 		printf("Error2 writing to EEPROM at address 0x%x\n", chip);
 
diff --git a/board/amcc/acadia/memory.c b/board/amcc/acadia/memory.c
index 48a672574..3e5c80ea4 100644
--- a/board/amcc/acadia/memory.c
+++ b/board/amcc/acadia/memory.c
@@ -39,7 +39,7 @@ static void cram_bcr_write(u32 wr_val)
 	wr_val <<= 2;
 
 	/* set CRAM_CRE to 1 */
-	gpio_write_bit(CFG_GPIO_CRAM_CRE, 1);
+	gpio_write_bit(CONFIG_SYS_GPIO_CRAM_CRE, 1);
 
 	/* Write BCR to CRAM on CS1 */
 	out32(wr_val + 0x00200000, 0);
@@ -53,7 +53,7 @@ static void cram_bcr_write(u32 wr_val)
 	eieio();
 
 	/* set CRAM_CRE back to 0 (normal operation) */
-	gpio_write_bit(CFG_GPIO_CRAM_CRE, 0);
+	gpio_write_bit(CONFIG_SYS_GPIO_CRAM_CRE, 0);
 
 	return;
 }
@@ -75,10 +75,10 @@ phys_size_t initdram(int board_type)
 	u32 val;
 
 	/* 1. EBC need to program READY, CLK, ADV for ASync mode */
-	gpio_config(CFG_GPIO_CRAM_CLK, GPIO_OUT, GPIO_SEL, GPIO_OUT_0);
-	gpio_config(CFG_GPIO_CRAM_ADV, GPIO_OUT, GPIO_SEL, GPIO_OUT_0);
-	gpio_config(CFG_GPIO_CRAM_CRE, GPIO_OUT, GPIO_SEL, GPIO_OUT_0);
-	gpio_config(CFG_GPIO_CRAM_WAIT, GPIO_IN, GPIO_SEL, GPIO_OUT_NO_CHG);
+	gpio_config(CONFIG_SYS_GPIO_CRAM_CLK, GPIO_OUT, GPIO_SEL, GPIO_OUT_0);
+	gpio_config(CONFIG_SYS_GPIO_CRAM_ADV, GPIO_OUT, GPIO_SEL, GPIO_OUT_0);
+	gpio_config(CONFIG_SYS_GPIO_CRAM_CRE, GPIO_OUT, GPIO_SEL, GPIO_OUT_0);
+	gpio_config(CONFIG_SYS_GPIO_CRAM_WAIT, GPIO_IN, GPIO_SEL, GPIO_OUT_NO_CHG);
 
 	/* 2. EBC in Async mode */
 	mtebc(pb1ap, 0x078F1EC0);
@@ -94,8 +94,8 @@ phys_size_t initdram(int board_type)
 	mtebc(pb2ap, 0x9C0201C0);
 
 	/* Set GPIO pins back to alternate function */
-	gpio_config(CFG_GPIO_CRAM_CLK, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG);
-	gpio_config(CFG_GPIO_CRAM_ADV, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG);
+	gpio_config(CONFIG_SYS_GPIO_CRAM_CLK, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG);
+	gpio_config(CONFIG_SYS_GPIO_CRAM_ADV, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG);
 
 	/* Config EBC to use RDY */
 	mfsdr(sdrultra0, val);
@@ -106,5 +106,5 @@ phys_size_t initdram(int board_type)
 		;
 #endif
 
-	return (CFG_MBYTES_RAM << 20);
+	return (CONFIG_SYS_MBYTES_RAM << 20);
 }
diff --git a/board/amcc/acadia/u-boot-nand.lds b/board/amcc/acadia/u-boot-nand.lds
index cbdc0b050..799c28ffd 100644
--- a/board/amcc/acadia/u-boot-nand.lds
+++ b/board/amcc/acadia/u-boot-nand.lds
@@ -57,7 +57,7 @@ SECTIONS
 
     /* Align to next NAND block */
     . = ALIGN(0x4000);
-    common/environment.o  (.ppcenv)
+    common/env_embedded.o  (.ppcenv)
     /* Keep some space here for redundant env and potential bad env blocks */
     . = ALIGN(0x10000);
 
@@ -129,6 +129,7 @@ SECTIONS
    *(.dynbss)
    *(.bss)
    *(COMMON)
+   . = ALIGN(4);
   }
 
   _end = . ;
diff --git a/board/amcc/acadia/u-boot.lds b/board/amcc/acadia/u-boot.lds
index d52b51ae1..fd5f3dfd1 100644
--- a/board/amcc/acadia/u-boot.lds
+++ b/board/amcc/acadia/u-boot.lds
@@ -130,6 +130,7 @@ SECTIONS
    *(.dynbss)
    *(.bss)
    *(COMMON)
+   . = ALIGN(4);
   }
   _end = . ;
   PROVIDE (end = .);
diff --git a/board/amcc/bamboo/bamboo.c b/board/amcc/bamboo/bamboo.c
index f4157017f..febc61a08 100644
--- a/board/amcc/bamboo/bamboo.c
+++ b/board/amcc/bamboo/bamboo.c
@@ -462,7 +462,7 @@ phys_size_t initdram (int board_type)
 
 	return dram_size;
 #else
-	return CFG_MBYTES_SDRAM << 20;
+	return CONFIG_SYS_MBYTES_SDRAM << 20;
 #endif
 }
 
@@ -529,7 +529,7 @@ int pci_pre_init(struct pci_controller *hose)
  *	may not be sufficient for a given board.
  *
  ************************************************************************/
-#if defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT)
+#if defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT)
 void pci_target_init(struct pci_controller *hose)
 {
 	/*--------------------------------------------------------------------------+
@@ -543,14 +543,14 @@ void pci_target_init(struct pci_controller *hose)
 	  | Make this region non-prefetchable.
 	  +--------------------------------------------------------------------------*/
 	out32r(PCIX0_PMM0MA, 0x00000000);	/* PMM0 Mask/Attribute - disabled b4 setting */
-	out32r(PCIX0_PMM0LA, CFG_PCI_MEMBASE);	/* PMM0 Local Address */
-	out32r(PCIX0_PMM0PCILA, CFG_PCI_MEMBASE);	/* PMM0 PCI Low Address */
+	out32r(PCIX0_PMM0LA, CONFIG_SYS_PCI_MEMBASE);	/* PMM0 Local Address */
+	out32r(PCIX0_PMM0PCILA, CONFIG_SYS_PCI_MEMBASE);	/* PMM0 PCI Low Address */
 	out32r(PCIX0_PMM0PCIHA, 0x00000000);	/* PMM0 PCI High Address */
 	out32r(PCIX0_PMM0MA, 0xE0000001);	/* 512M + No prefetching, and enable region */
 
 	out32r(PCIX0_PMM1MA, 0x00000000);	/* PMM0 Mask/Attribute - disabled b4 setting */
-	out32r(PCIX0_PMM1LA, CFG_PCI_MEMBASE2); /* PMM0 Local Address */
-	out32r(PCIX0_PMM1PCILA, CFG_PCI_MEMBASE2);	/* PMM0 PCI Low Address */
+	out32r(PCIX0_PMM1LA, CONFIG_SYS_PCI_MEMBASE2); /* PMM0 Local Address */
+	out32r(PCIX0_PMM1PCILA, CONFIG_SYS_PCI_MEMBASE2);	/* PMM0 PCI Low Address */
 	out32r(PCIX0_PMM1PCIHA, 0x00000000);	/* PMM0 PCI High Address */
 	out32r(PCIX0_PMM1MA, 0xE0000001);	/* 512M + No prefetching, and enable region */
 
@@ -565,8 +565,8 @@ void pci_target_init(struct pci_controller *hose)
 
 	/* Program the board's subsystem id/vendor id */
 	pci_write_config_word(0, PCI_SUBSYSTEM_VENDOR_ID,
-			      CFG_PCI_SUBSYS_VENDORID);
-	pci_write_config_word(0, PCI_SUBSYSTEM_ID, CFG_PCI_SUBSYS_ID);
+			      CONFIG_SYS_PCI_SUBSYS_VENDORID);
+	pci_write_config_word(0, PCI_SUBSYSTEM_ID, CONFIG_SYS_PCI_SUBSYS_ID);
 
 	/* Configure command register as bus master */
 	pci_write_config_word(0, PCI_COMMAND, PCI_COMMAND_MASTER);
@@ -580,13 +580,13 @@ void pci_target_init(struct pci_controller *hose)
 	pci_write_config_dword(0, PCI_BRDGOPT2, 0x00000101);
 
 }
-#endif				/* defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT) */
+#endif				/* defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT) */
 
 /*************************************************************************
  *  pci_master_init
  *
  ************************************************************************/
-#if defined(CONFIG_PCI) && defined(CFG_PCI_MASTER_INIT)
+#if defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_MASTER_INIT)
 void pci_master_init(struct pci_controller *hose)
 {
 	unsigned short temp_short;
@@ -601,7 +601,7 @@ void pci_master_init(struct pci_controller *hose)
 			      temp_short | PCI_COMMAND_MASTER |
 			      PCI_COMMAND_MEMORY);
 }
-#endif				/* defined(CONFIG_PCI) && defined(CFG_PCI_MASTER_INIT) */
+#endif				/* defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_MASTER_INIT) */
 
 /*************************************************************************
  *  is_pci_host
diff --git a/board/amcc/bamboo/config.mk b/board/amcc/bamboo/config.mk
index b46527dcc..a37636a0a 100644
--- a/board/amcc/bamboo/config.mk
+++ b/board/amcc/bamboo/config.mk
@@ -34,5 +34,5 @@ PLATFORM_CPPFLAGS += -DDEBUG
 endif
 
 ifeq ($(dbcr),1)
-PLATFORM_CPPFLAGS += -DCFG_INIT_DBCR=0x8cff0000
+PLATFORM_CPPFLAGS += -DCONFIG_SYS_INIT_DBCR=0x8cff0000
 endif
diff --git a/board/amcc/bamboo/flash.c b/board/amcc/bamboo/flash.c
index 8a2e832cf..001348ac5 100644
--- a/board/amcc/bamboo/flash.c
+++ b/board/amcc/bamboo/flash.c
@@ -45,12 +45,12 @@
 #define DEBUGF(x...)
 #endif				/* DEBUG */
 
-flash_info_t flash_info[CFG_MAX_FLASH_BANKS];	/* info for FLASH chips        */
+flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];	/* info for FLASH chips        */
 
 /*
  * Mark big flash bank (16 bit instead of 8 bit access) in address with bit 0
  */
-static unsigned long flash_addr_table[][CFG_MAX_FLASH_BANKS] = {
+static unsigned long flash_addr_table[][CONFIG_SYS_MAX_FLASH_BANKS] = {
 	{0x87800001, 0xFFF00000, 0xFFF80000}, /* 0:boot from small flash */
 	{0x00000000, 0x00000000, 0x00000000}, /* 1:boot from pci 66      */
 	{0x87800001, 0x00000000, 0x00000000}, /* 0:boot from nand flash  */
@@ -79,7 +79,7 @@ static int write_word(flash_info_t * info, ulong dest, ulong data);
 unsigned long flash_init(void)
 {
 	unsigned long total_b = 0;
-	unsigned long size_b[CFG_MAX_FLASH_BANKS];
+	unsigned long size_b[CONFIG_SYS_MAX_FLASH_BANKS];
 	unsigned short index = 0;
 	int i;
 	unsigned long val;
@@ -128,7 +128,7 @@ unsigned long flash_init(void)
 	DEBUGF("FLASH: Index: %d\n", index);
 
 	/* Init: no FLASHes known */
-	for (i = 0; i < CFG_MAX_FLASH_BANKS; ++i) {
+	for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
 		flash_info[i].flash_id = FLASH_UNKNOWN;
 		flash_info[i].sector_count = -1;
 		flash_info[i].size = 0;
@@ -150,16 +150,16 @@ unsigned long flash_init(void)
 		}
 
 		/* Monitor protection ON by default */
-		(void)flash_protect(FLAG_PROTECT_SET, CFG_MONITOR_BASE,
-				    CFG_MONITOR_BASE + CFG_MONITOR_LEN - 1,
+		(void)flash_protect(FLAG_PROTECT_SET, CONFIG_SYS_MONITOR_BASE,
+				    CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN - 1,
 				    &flash_info[i]);
-#if defined(CFG_ENV_IS_IN_FLASH)
-		(void)flash_protect(FLAG_PROTECT_SET, CFG_ENV_ADDR,
-				    CFG_ENV_ADDR + CFG_ENV_SECT_SIZE - 1,
+#if defined(CONFIG_ENV_IS_IN_FLASH)
+		(void)flash_protect(FLAG_PROTECT_SET, CONFIG_ENV_ADDR,
+				    CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE - 1,
 				    &flash_info[i]);
-#if defined(CFG_ENV_IS_IN_FLASH) && defined(CFG_ENV_ADDR_REDUND)
-		(void)flash_protect(FLAG_PROTECT_SET, CFG_ENV_ADDR_REDUND,
-				    CFG_ENV_ADDR_REDUND + CFG_ENV_SECT_SIZE - 1,
+#if defined(CONFIG_ENV_IS_IN_FLASH) && defined(CONFIG_ENV_ADDR_REDUND)
+		(void)flash_protect(FLAG_PROTECT_SET, CONFIG_ENV_ADDR_REDUND,
+				    CONFIG_ENV_ADDR_REDUND + CONFIG_ENV_SECT_SIZE - 1,
 				    &flash_info[i]);
 #endif
 #endif
diff --git a/board/amcc/bamboo/init.S b/board/amcc/bamboo/init.S
index f4d2ae3f4..a5c9d6d76 100644
--- a/board/amcc/bamboo/init.S
+++ b/board/amcc/bamboo/init.S
@@ -48,29 +48,29 @@ tlbtab:
 	 * speed up boot process. It is patched after relocation to enable SA_I
 	 */
 #ifndef CONFIG_NAND_SPL
-	tlbentry(CFG_BOOT_BASE_ADDR, SZ_256M, CFG_BOOT_BASE_ADDR, 0, AC_R|AC_W|AC_X|SA_G)
+	tlbentry(CONFIG_SYS_BOOT_BASE_ADDR, SZ_256M, CONFIG_SYS_BOOT_BASE_ADDR, 0, AC_R|AC_W|AC_X|SA_G)
 #else
-	tlbentry(CFG_NAND_BOOT_SPL_SRC, SZ_4K, CFG_NAND_BOOT_SPL_SRC, 0, AC_R|AC_W|AC_X|SA_G)
-	tlbentry(CFG_SDRAM_BASE, SZ_256M, CFG_SDRAM_BASE, 0, AC_R|AC_W|AC_X|SA_G|SA_I)
+	tlbentry(CONFIG_SYS_NAND_BOOT_SPL_SRC, SZ_4K, CONFIG_SYS_NAND_BOOT_SPL_SRC, 0, AC_R|AC_W|AC_X|SA_G)
+	tlbentry(CONFIG_SYS_SDRAM_BASE, SZ_256M, CONFIG_SYS_SDRAM_BASE, 0, AC_R|AC_W|AC_X|SA_G|SA_I)
 #endif
 
 	/* TLB-entry for init-ram in dcache (SA_I must be turned off!) */
-	tlbentry(CFG_INIT_RAM_ADDR, SZ_4K, CFG_INIT_RAM_ADDR, 0, AC_R|AC_W|AC_X|SA_G)
+	tlbentry(CONFIG_SYS_INIT_RAM_ADDR, SZ_4K, CONFIG_SYS_INIT_RAM_ADDR, 0, AC_R|AC_W|AC_X|SA_G)
 
 	/* PCI base & peripherals */
-	tlbentry(CFG_PCI_BASE, SZ_256M, CFG_PCI_BASE, 0, AC_R|AC_W|SA_G|SA_I)
+	tlbentry(CONFIG_SYS_PCI_BASE, SZ_256M, CONFIG_SYS_PCI_BASE, 0, AC_R|AC_W|SA_G|SA_I)
 
-	tlbentry(CFG_NVRAM_BASE_ADDR, SZ_256M, CFG_NVRAM_BASE_ADDR, 0, AC_R|AC_W|AC_X|SA_W|SA_I)
-	tlbentry(CFG_NAND_ADDR, SZ_4K, CFG_NAND_ADDR, 0, AC_R|AC_W|AC_X|SA_W|SA_I)
+	tlbentry(CONFIG_SYS_NVRAM_BASE_ADDR, SZ_256M, CONFIG_SYS_NVRAM_BASE_ADDR, 0, AC_R|AC_W|AC_X|SA_W|SA_I)
+	tlbentry(CONFIG_SYS_NAND_ADDR, SZ_4K, CONFIG_SYS_NAND_ADDR, 0, AC_R|AC_W|AC_X|SA_W|SA_I)
 
 	/* PCI */
-	tlbentry(CFG_PCI_MEMBASE, SZ_256M, CFG_PCI_MEMBASE, 0, AC_R|AC_W|SA_G|SA_I)
-	tlbentry(CFG_PCI_MEMBASE1, SZ_256M, CFG_PCI_MEMBASE1, 0, AC_R|AC_W|SA_G|SA_I)
-	tlbentry(CFG_PCI_MEMBASE2, SZ_256M, CFG_PCI_MEMBASE2, 0, AC_R|AC_W|SA_G|SA_I)
-	tlbentry(CFG_PCI_MEMBASE3, SZ_256M, CFG_PCI_MEMBASE3, 0, AC_R|AC_W|SA_G|SA_I)
+	tlbentry(CONFIG_SYS_PCI_MEMBASE, SZ_256M, CONFIG_SYS_PCI_MEMBASE, 0, AC_R|AC_W|SA_G|SA_I)
+	tlbentry(CONFIG_SYS_PCI_MEMBASE1, SZ_256M, CONFIG_SYS_PCI_MEMBASE1, 0, AC_R|AC_W|SA_G|SA_I)
+	tlbentry(CONFIG_SYS_PCI_MEMBASE2, SZ_256M, CONFIG_SYS_PCI_MEMBASE2, 0, AC_R|AC_W|SA_G|SA_I)
+	tlbentry(CONFIG_SYS_PCI_MEMBASE3, SZ_256M, CONFIG_SYS_PCI_MEMBASE3, 0, AC_R|AC_W|SA_G|SA_I)
 
 	/* USB 2.0 Device */
-	tlbentry(CFG_USB_DEVICE, SZ_1K, CFG_USB_DEVICE, 0, AC_R|AC_W|SA_G|SA_I)
+	tlbentry(CONFIG_SYS_USB_DEVICE, SZ_1K, CONFIG_SYS_USB_DEVICE, 0, AC_R|AC_W|SA_G|SA_I)
 
 	tlbtab_end
 
@@ -79,8 +79,8 @@ tlbtab:
 	 * For NAND booting the first TLB has to be reconfigured to full size
 	 * and with caching disabled after running from RAM!
 	 */
-#define TLB00	TLB0(CFG_BOOT_BASE_ADDR, SZ_256M)
-#define TLB01	TLB1(CFG_BOOT_BASE_ADDR, 0)
+#define TLB00	TLB0(CONFIG_SYS_BOOT_BASE_ADDR, SZ_256M)
+#define TLB01	TLB1(CONFIG_SYS_BOOT_BASE_ADDR, 0)
 #define TLB02	TLB2(AC_R|AC_W|AC_X|SA_G|SA_I)
 
 	.globl	reconfig_tlb0
diff --git a/board/amcc/bamboo/u-boot-nand.lds b/board/amcc/bamboo/u-boot-nand.lds
index cbdc0b050..799c28ffd 100644
--- a/board/amcc/bamboo/u-boot-nand.lds
+++ b/board/amcc/bamboo/u-boot-nand.lds
@@ -57,7 +57,7 @@ SECTIONS
 
     /* Align to next NAND block */
     . = ALIGN(0x4000);
-    common/environment.o  (.ppcenv)
+    common/env_embedded.o  (.ppcenv)
     /* Keep some space here for redundant env and potential bad env blocks */
     . = ALIGN(0x10000);
 
@@ -129,6 +129,7 @@ SECTIONS
    *(.dynbss)
    *(.bss)
    *(COMMON)
+   . = ALIGN(4);
   }
 
   _end = . ;
diff --git a/board/amcc/bamboo/u-boot.lds b/board/amcc/bamboo/u-boot.lds
index 25d917a4f..113418de9 100644
--- a/board/amcc/bamboo/u-boot.lds
+++ b/board/amcc/bamboo/u-boot.lds
@@ -138,6 +138,7 @@ SECTIONS
    *(.dynbss)
    *(.bss)
    *(COMMON)
+   . = ALIGN(4);
   }
 
   _end = . ;
diff --git a/board/amcc/bubinga/flash.c b/board/amcc/bubinga/flash.c
index e4832ebf3..a10babbf7 100644
--- a/board/amcc/bubinga/flash.c
+++ b/board/amcc/bubinga/flash.c
@@ -32,7 +32,7 @@
 #include <ppc4xx.h>
 #include <asm/processor.h>
 
-flash_info_t flash_info[CFG_MAX_FLASH_BANKS];	/* info for FLASH chips        */
+flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];	/* info for FLASH chips        */
 
 #undef DEBUG
 #ifdef DEBUG
@@ -60,7 +60,7 @@ unsigned long flash_init(void)
 	unsigned long base_b0, base_b1;
 
 	/* Init: no FLASHes known */
-	for (i = 0; i < CFG_MAX_FLASH_BANKS; ++i) {
+	for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
 		flash_info[i].flash_id = FLASH_UNKNOWN;
 	}
 
@@ -75,21 +75,21 @@ unsigned long flash_init(void)
 	}
 
 	/* Only one bank */
-	if (CFG_MAX_FLASH_BANKS == 1) {
+	if (CONFIG_SYS_MAX_FLASH_BANKS == 1) {
 		/* Setup offsets */
 		flash_get_offsets(FLASH_BASE0_PRELIM, &flash_info[0]);
 
 		/* Monitor protection ON by default */
 		(void)flash_protect(FLAG_PROTECT_SET,
-				    CFG_MONITOR_BASE,
-				    CFG_MONITOR_BASE + CFG_MONITOR_LEN - 1,
+				    CONFIG_SYS_MONITOR_BASE,
+				    CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN - 1,
 				    &flash_info[0]);
-#ifdef CFG_ENV_IS_IN_FLASH
-		(void)flash_protect(FLAG_PROTECT_SET, CFG_ENV_ADDR,
-				    CFG_ENV_ADDR + CFG_ENV_SECT_SIZE - 1,
+#ifdef CONFIG_ENV_IS_IN_FLASH
+		(void)flash_protect(FLAG_PROTECT_SET, CONFIG_ENV_ADDR,
+				    CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE - 1,
 				    &flash_info[0]);
-		(void)flash_protect(FLAG_PROTECT_SET, CFG_ENV_ADDR_REDUND,
-				    CFG_ENV_ADDR_REDUND + CFG_ENV_SECT_SIZE - 1,
+		(void)flash_protect(FLAG_PROTECT_SET, CONFIG_ENV_ADDR_REDUND,
+				    CONFIG_ENV_ADDR_REDUND + CONFIG_ENV_SECT_SIZE - 1,
 				    &flash_info[0]);
 #endif
 
@@ -133,7 +133,7 @@ unsigned long flash_init(void)
 
 		/* monitor protection ON by default */
 		(void)flash_protect(FLAG_PROTECT_SET,
-				    base_b0 + size_b0 - CFG_MONITOR_LEN,
+				    base_b0 + size_b0 - CONFIG_SYS_MONITOR_LEN,
 				    base_b0 + size_b0 - 1, &flash_info[0]);
 		/* Also protect sector containing initial power-up instruction */
 		/* (flash_protect() checks address range - other call ignored) */
@@ -151,12 +151,12 @@ unsigned long flash_init(void)
 
 			/* monitor protection ON by default */
 			(void)flash_protect(FLAG_PROTECT_SET,
-					    base_b1 + size_b1 - CFG_MONITOR_LEN,
+					    base_b1 + size_b1 - CONFIG_SYS_MONITOR_LEN,
 					    base_b1 + size_b1 - 1,
 					    &flash_info[1]);
 			/* monitor protection OFF by default (one is enough) */
 			(void)flash_protect(FLAG_PROTECT_CLEAR,
-					    base_b0 + size_b0 - CFG_MONITOR_LEN,
+					    base_b0 + size_b0 - CONFIG_SYS_MONITOR_LEN,
 					    base_b0 + size_b0 - 1,
 					    &flash_info[0]);
 		} else {
diff --git a/board/amcc/bubinga/u-boot.lds b/board/amcc/bubinga/u-boot.lds
index d52b51ae1..fd5f3dfd1 100644
--- a/board/amcc/bubinga/u-boot.lds
+++ b/board/amcc/bubinga/u-boot.lds
@@ -130,6 +130,7 @@ SECTIONS
    *(.dynbss)
    *(.bss)
    *(COMMON)
+   . = ALIGN(4);
   }
   _end = . ;
   PROVIDE (end = .);
diff --git a/board/amcc/canyonlands/bootstrap.c b/board/amcc/canyonlands/bootstrap.c
index 1d125b6e6..b1f4a213d 100644
--- a/board/amcc/canyonlands/bootstrap.c
+++ b/board/amcc/canyonlands/bootstrap.c
@@ -40,6 +40,8 @@
 static char *config_labels[] = {
 	"CPU: 600 PLB: 200 OPB: 100 EBC: 100",
 	"CPU: 800 PLB: 200 OPB: 100 EBC: 100",
+	"CPU:1000 PLB: 200 OPB: 100 EBC: 100",
+	"CPU:1066 PLB: 266 OPB:  88 EBC:  88",
 	NULL
 };
 
@@ -55,6 +57,16 @@ static u8 boot_configs[][17] = {
 		0x23, 0x50, 0x0d, 0x05, 0x00, 0x00
 	},
 	{
+		(NAND_COMPATIBLE | NOR_COMPATIBLE),
+		0x86, 0x82, 0x96, 0x19, 0xb9, 0x80, 0x00, 0xa0, 0x40, 0x08,
+		0x23, 0x50, 0x0d, 0x05, 0x00, 0x00
+	},
+	{
+		(NAND_COMPATIBLE | NOR_COMPATIBLE),
+		0x86, 0x80, 0xb3, 0x01, 0x9d, 0x80, 0x00, 0xa0, 0x40, 0x08,
+		0x23, 0x50, 0x0d, 0x05, 0x00, 0x00
+	},
+	{
 		0,
 		0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
 	}
@@ -168,7 +180,7 @@ static int do_bootstrap(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 
 	if (i2c_write(I2C_EEPROM_ADDR, 0, 1, buf, 16) != 0)
 		printf("Error writing to EEPROM at address 0x%x\n", I2C_EEPROM_ADDR);
-	udelay(CFG_EEPROM_PAGE_WRITE_DELAY_MS * 1000);
+	udelay(CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS * 1000);
 
 	printf("Done\n");
 	printf("Please power-cycle the board for the changes to take effect\n");
diff --git a/board/amcc/canyonlands/canyonlands.c b/board/amcc/canyonlands/canyonlands.c
index e9eba49c4..2b7468923 100644
--- a/board/amcc/canyonlands/canyonlands.c
+++ b/board/amcc/canyonlands/canyonlands.c
@@ -29,20 +29,61 @@
 #include <asm/4xx_pcie.h>
 #include <asm/gpio.h>
 
-extern flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
+extern flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */
 
 DECLARE_GLOBAL_DATA_PTR;
 
-#define CFG_BCSR3_PCIE		0x10
+#define CONFIG_SYS_BCSR3_PCIE		0x10
 
 #define BOARD_CANYONLANDS_PCIE	1
 #define BOARD_CANYONLANDS_SATA	2
 #define BOARD_GLACIER		3
+#define BOARD_ARCHES		4
+
+#if defined(CONFIG_ARCHES)
+/*
+ * FPGA read/write helper macros
+ */
+static inline int board_fpga_read(int offset)
+{
+	int data;
+
+	data = in_8((void *)(CONFIG_SYS_FPGA_BASE + offset));
+
+	return data;
+}
+
+static inline void board_fpga_write(int offset, int data)
+{
+	out_8((void *)(CONFIG_SYS_FPGA_BASE + offset), data);
+}
+
+/*
+ * CPLD read/write helper macros
+ */
+static inline int board_cpld_read(int offset)
+{
+	int data;
+
+	out_8((void *)(CONFIG_SYS_CPLD_ADDR), offset);
+	data = in_8((void *)(CONFIG_SYS_CPLD_DATA));
+
+	return data;
+}
+
+static inline void board_cpld_write(int offset, int data)
+{
+	out_8((void *)(CONFIG_SYS_CPLD_ADDR), offset);
+	out_8((void *)(CONFIG_SYS_CPLD_DATA), data);
+}
+#endif	/* defined(CONFIG_ARCHES) */
 
 int board_early_init_f(void)
 {
+#if !defined(CONFIG_ARCHES)
 	u32 sdr0_cust0;
 	u32 pvr = get_pvr();
+#endif
 
 	/*
 	 * Setup the interrupt controller polarities, triggers, etc.
@@ -79,6 +120,7 @@ int board_early_init_f(void)
 	mtdcr(uic3vr, 0x00000000);	/* int31 highest, base=0x000 */
 	mtdcr(uic3sr, 0xffffffff);	/* clear all */
 
+#if !defined(CONFIG_ARCHES)
 	/* SDR Setting - enable NDFC */
 	mfsdr(SDR0_CUST0, sdr0_cust0);
 	sdr0_cust0 = SDR0_CUST0_MUX_NDFC_SEL	|
@@ -86,8 +128,9 @@ int board_early_init_f(void)
 		SDR0_CUST0_NDFC_BW_8_BIT	|
 		SDR0_CUST0_NDFC_ARE_MASK	|
 		SDR0_CUST0_NDFC_BAC_ENCODE(3)	|
-		(0x80000000 >> (28 + CFG_NAND_CS));
+		(0x80000000 >> (28 + CONFIG_SYS_NAND_CS));
 	mtsdr(SDR0_CUST0, sdr0_cust0);
+#endif
 
 	/*
 	 * Configure PFC (Pin Function Control) registers
@@ -98,14 +141,15 @@ int board_early_init_f(void)
 	/* Enable PCI host functionality in SDR0_PCI0 */
 	mtsdr(SDR0_PCI0, 0xe0000000);
 
+#if !defined(CONFIG_ARCHES)
 	/* Enable ethernet and take out of reset */
-	out_8((void *)CFG_BCSR_BASE + 6, 0);
+	out_8((void *)CONFIG_SYS_BCSR_BASE + 6, 0);
 
 	/* Remove NOR-FLASH, NAND-FLASH & EEPROM hardware write protection */
-	out_8((void *)CFG_BCSR_BASE + 5, 0);
+	out_8((void *)CONFIG_SYS_BCSR_BASE + 5, 0);
 
 	/* Enable USB host & USB-OTG */
-	out_8((void *)CFG_BCSR_BASE + 7, 0);
+	out_8((void *)CONFIG_SYS_BCSR_BASE + 7, 0);
 
 	mtsdr(SDR0_SRST1, 0);	/* Pull AHB out of reset default=1 */
 
@@ -123,10 +167,12 @@ int board_early_init_f(void)
 		gpio_config(16, GPIO_OUT, GPIO_ALT1, GPIO_OUT_1);
 		gpio_config(19, GPIO_OUT, GPIO_ALT1, GPIO_OUT_1);
 	}
+#endif
 
 	return 0;
 }
 
+#if !defined(CONFIG_ARCHES)
 static void canyonlands_sata_init(int board_type)
 {
 	u32 reg;
@@ -147,7 +193,26 @@ static void canyonlands_sata_init(int board_type)
 		SDR_WRITE(SDR0_SRST1, 0x00000000);
 	}
 }
+#endif	/* !defined(CONFIG_ARCHES) */
+
+int get_cpu_num(void)
+{
+	int cpu = NA_OR_UNKNOWN_CPU;
+
+#if defined(CONFIG_ARCHES)
+	int cpu_num;
+
+	cpu_num = board_fpga_read(0x3);
+
+	/* sanity check; assume cpu numbering starts and increments from 0 */
+	if ((cpu_num >= 0) && (cpu_num < CONFIG_BD_NUM_CPUS))
+		cpu = cpu_num;
+#endif
+
+	return cpu;
+}
 
+#if !defined(CONFIG_ARCHES)
 int checkboard(void)
 {
 	char *s = getenv("serial#");
@@ -158,7 +223,7 @@ int checkboard(void)
 		gd->board_type = BOARD_GLACIER;
 	} else {
 		printf("Board: Canyonlands - AMCC PPC460EX Evaluation Board");
-		if (in_8((void *)(CFG_BCSR_BASE + 3)) & CFG_BCSR3_PCIE)
+		if (in_8((void *)(CONFIG_SYS_BCSR_BASE + 3)) & CONFIG_SYS_BCSR3_PCIE)
 			gd->board_type = BOARD_CANYONLANDS_PCIE;
 		else
 			gd->board_type = BOARD_CANYONLANDS_SATA;
@@ -175,7 +240,7 @@ int checkboard(void)
 		break;
 	}
 
-	printf(", Rev. %X", in_8((void *)(CFG_BCSR_BASE + 0)));
+	printf(", Rev. %X", in_8((void *)(CONFIG_SYS_BCSR_BASE + 0)));
 
 	if (s != NULL) {
 		puts(", serial# ");
@@ -188,6 +253,39 @@ int checkboard(void)
 	return (0);
 }
 
+#else	/* defined(CONFIG_ARCHES) */
+
+int checkboard(void)
+{
+	char *s = getenv("serial#");
+
+	printf("Board: Arches - AMCC DUAL PPC460GT Reference Design\n");
+	printf("       Revision %02x.%02x ",
+				board_fpga_read(0x0), board_fpga_read(0x1));
+
+	gd->board_type = BOARD_ARCHES;
+
+	/* Only CPU0 has access to CPLD registers */
+	if (get_cpu_num() == 0) {
+		u8 cfg_sw = board_cpld_read(0x1);
+		printf("(FPGA=%02x, CPLD=%02x)\n",
+				board_fpga_read(0x2), board_cpld_read(0x0));
+		printf("       Configuration Switch %d%d%d%d\n",
+				((cfg_sw >> 3) & 0x01),
+				((cfg_sw >> 2) & 0x01),
+				((cfg_sw >> 1) & 0x01),
+				((cfg_sw >> 0) & 0x01));
+	} else
+		printf("(FPGA=%02x, CPLD=xx)\n", board_fpga_read(0x2));
+
+
+	if (s != NULL)
+		printf("       Serial# %s\n", s);
+
+	return 0;
+}
+#endif	/* !defined(CONFIG_ARCHES) */
+
 /*
  * Override the default functions in cpu/ppc4xx/44x_spd_ddr2.c with
  * board specific values.
@@ -208,7 +306,7 @@ u32 ddr_clktr(u32 default_val) {
  */
 phys_size_t initdram(int board_type)
 {
-	return CFG_MBYTES_SDRAM << 20;
+	return CONFIG_SYS_MBYTES_SDRAM << 20;
 }
 #endif
 
@@ -219,7 +317,7 @@ phys_size_t initdram(int board_type)
  *	inbound map (PIM). But the bootstrap config choices are limited and
  *	may not be sufficient for a given board.
  */
-#if defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT)
+#if defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT)
 void pci_target_init(struct pci_controller * hose )
 {
 	/*
@@ -234,7 +332,7 @@ void pci_target_init(struct pci_controller * hose )
 	 * Map all of SDRAM to PCI address 0x0000_0000. Note that the 440
 	 * strapping options to not support sizes such as 128/256 MB.
 	 */
-	out_le32((void *)PCIX0_PIM0LAL, CFG_SDRAM_BASE);
+	out_le32((void *)PCIX0_PIM0LAL, CONFIG_SYS_SDRAM_BASE);
 	out_le32((void *)PCIX0_PIM0LAH, 0);
 	out_le32((void *)PCIX0_PIM0SA, ~(gd->ram_size - 1) | 1);
 	out_le32((void *)PCIX0_BAR0, 0);
@@ -242,12 +340,12 @@ void pci_target_init(struct pci_controller * hose )
 	/*
 	 * Program the board's subsystem id/vendor id
 	 */
-	out_le16((void *)PCIX0_SBSYSVID, CFG_PCI_SUBSYS_VENDORID);
-	out_le16((void *)PCIX0_SBSYSID, CFG_PCI_SUBSYS_DEVICEID);
+	out_le16((void *)PCIX0_SBSYSVID, CONFIG_SYS_PCI_SUBSYS_VENDORID);
+	out_le16((void *)PCIX0_SBSYSID, CONFIG_SYS_PCI_SUBSYS_DEVICEID);
 
 	out_le16((void *)PCIX0_CMD, in16r(PCIX0_CMD) | PCI_COMMAND_MEMORY);
 }
-#endif	/* defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT) */
+#endif	/* defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT) */
 
 #if defined(CONFIG_PCI)
 /*
@@ -314,9 +412,9 @@ void pcie_setup_hoses(int busno)
 
 		/* setup mem resource */
 		pci_set_region(hose->regions + 0,
-			       CFG_PCIE_MEMBASE + i * CFG_PCIE_MEMSIZE,
-			       CFG_PCIE_MEMBASE + i * CFG_PCIE_MEMSIZE,
-			       CFG_PCIE_MEMSIZE,
+			       CONFIG_SYS_PCIE_MEMBASE + i * CONFIG_SYS_PCIE_MEMSIZE,
+			       CONFIG_SYS_PCIE_MEMBASE + i * CONFIG_SYS_PCIE_MEMSIZE,
+			       CONFIG_SYS_PCIE_MEMSIZE,
 			       PCI_REGION_MEM);
 		hose->region_count = 1;
 		pci_register_hose(hose);
@@ -362,16 +460,16 @@ int board_early_init_r (void)
 
 	/* Remap the NOR FLASH to 0xcc00.0000 ... 0xcfff.ffff */
 #if defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_NAND_SPL)
-	mtebc(pb3cr, CFG_FLASH_BASE_PHYS_L | 0xda000);
+	mtebc(pb3cr, CONFIG_SYS_FLASH_BASE_PHYS_L | 0xda000);
 #else
-	mtebc(pb0cr, CFG_FLASH_BASE_PHYS_L | 0xda000);
+	mtebc(pb0cr, CONFIG_SYS_FLASH_BASE_PHYS_L | 0xda000);
 #endif
 
 	/* Remove TLB entry of boot EBC mapping */
-	remove_tlb(CFG_BOOT_BASE_ADDR, 16 << 20);
+	remove_tlb(CONFIG_SYS_BOOT_BASE_ADDR, 16 << 20);
 
 	/* Add TLB entry for 0xfc00.0000 -> 0x4.cc00.0000 */
-	program_tlb(CFG_FLASH_BASE_PHYS, CFG_FLASH_BASE, CFG_FLASH_SIZE,
+	program_tlb(CONFIG_SYS_FLASH_BASE_PHYS, CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_SIZE,
 		    TLB_WORD2_I_ENABLE);
 
 	/*
@@ -389,6 +487,7 @@ int board_early_init_r (void)
 	return 0;
 }
 
+#if !defined(CONFIG_ARCHES)
 int misc_init_r(void)
 {
 	u32 sdr0_srst1 = 0;
@@ -427,13 +526,54 @@ int misc_init_r(void)
 	 * Disable square wave output: Batterie will be drained
 	 * quickly, when this output is not disabled
 	 */
-	val = i2c_reg_read(CFG_I2C_RTC_ADDR, 0xa);
+	val = i2c_reg_read(CONFIG_SYS_I2C_RTC_ADDR, 0xa);
 	val &= ~0x40;
-	i2c_reg_write(CFG_I2C_RTC_ADDR, 0xa, val);
+	i2c_reg_write(CONFIG_SYS_I2C_RTC_ADDR, 0xa, val);
 
 	return 0;
 }
 
+#else	/* defined(CONFIG_ARCHES) */
+
+int misc_init_r(void)
+{
+	u32 eth_cfg = 0;
+	u32 eth_pll;
+	u32 reg;
+
+	/*
+	 * Set EMAC mode/configuration (GMII, SGMII, RGMII...).
+	 * This is board specific, so let's do it here.
+	 */
+
+	/* enable SGMII mode */
+	eth_cfg |= (SDR0_ETH_CFG_SGMII0_ENABLE |
+			SDR0_ETH_CFG_SGMII1_ENABLE |
+			SDR0_ETH_CFG_SGMII2_ENABLE);
+
+	/* Set EMAC for MDIO */
+	eth_cfg |= SDR0_ETH_CFG_MDIO_SEL_EMAC0;
+
+	/* bypass the TAHOE0/TAHOE1 cores for U-Boot */
+	eth_cfg |= (SDR0_ETH_CFG_TAHOE0_BYPASS | SDR0_ETH_CFG_TAHOE1_BYPASS);
+
+	mtsdr(SDR0_ETH_CFG, eth_cfg);
+
+	/* reset all SGMII interfaces */
+	mfsdr(SDR0_SRST1,   reg);
+	reg |= (SDR0_SRST1_SGMII0 | SDR0_SRST1_SGMII1 | SDR0_SRST1_SGMII2);
+	mtsdr(SDR0_SRST1, reg);
+	mtsdr(SDR0_ETH_STS, 0xFFFFFFFF);
+	mtsdr(SDR0_SRST1,   0x00000000);
+
+	do {
+		mfsdr(SDR0_ETH_PLL, eth_pll);
+	} while (!(eth_pll & SDR0_ETH_PLL_PLLLOCK));
+
+	return 0;
+}
+#endif	/* !defined(CONFIG_ARCHES) */
+
 #if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP)
 void ft_board_setup(void *blob, bd_t *bd)
 {
@@ -445,7 +585,7 @@ void ft_board_setup(void *blob, bd_t *bd)
 	/* Fixup NOR mapping */
 	val[0] = 0;				/* chip select number */
 	val[1] = 0;				/* always 0 */
-	val[2] = CFG_FLASH_BASE_PHYS_L;		/* we fixed up this address */
+	val[2] = CONFIG_SYS_FLASH_BASE_PHYS_L;		/* we fixed up this address */
 	val[3] = gd->bd->bi_flashsize;
 	rc = fdt_find_and_setprop(blob, "/plb/opb/ebc", "ranges",
 				  val, sizeof(val), 1);
@@ -460,12 +600,8 @@ void ft_board_setup(void *blob, bd_t *bd)
 		 * node in the device tree, so that Linux doesn't initialize
 		 * it.
 		 */
-		rc = fdt_find_and_setprop(blob, "/plb/pciex@d00000000", "status",
-					  "disabled", sizeof("disabled"), 1);
-		if (rc) {
-			printf("Unable to update property status in PCIe node, err=%s\n",
-			       fdt_strerror(rc));
-		}
+		fdt_find_and_setprop(blob, "/plb/pciex@d00000000", "status",
+				     "disabled", sizeof("disabled"), 1);
 	}
 
 	if (gd->board_type == BOARD_CANYONLANDS_PCIE) {
@@ -474,12 +610,8 @@ void ft_board_setup(void *blob, bd_t *bd)
 		 * node in the device tree, so that Linux doesn't initialize
 		 * it.
 		 */
-		rc = fdt_find_and_setprop(blob, "/plb/sata@bffd1000", "status",
-					  "disabled", sizeof("disabled"), 1);
-		if (rc) {
-			printf("Unable to update property status in PCIe node, err=%s\n",
-			       fdt_strerror(rc));
-		}
+		fdt_find_and_setprop(blob, "/plb/sata@bffd1000", "status",
+				     "disabled", sizeof("disabled"), 1);
 	}
 }
 #endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */
diff --git a/board/amcc/canyonlands/config.mk b/board/amcc/canyonlands/config.mk
index 2330cae92..551a81755 100644
--- a/board/amcc/canyonlands/config.mk
+++ b/board/amcc/canyonlands/config.mk
@@ -37,5 +37,5 @@ PLATFORM_CPPFLAGS += -DDEBUG
 endif
 
 ifeq ($(dbcr),1)
-PLATFORM_CPPFLAGS += -DCFG_INIT_DBCR=0x8cff0000
+PLATFORM_CPPFLAGS += -DCONFIG_SYS_INIT_DBCR=0x8cff0000
 endif
diff --git a/board/amcc/canyonlands/init.S b/board/amcc/canyonlands/init.S
index 258fb5de8..0b667968a 100644
--- a/board/amcc/canyonlands/init.S
+++ b/board/amcc/canyonlands/init.S
@@ -47,10 +47,10 @@ tlbtab:
 	 * enable SA_I
 	 */
 #ifndef CONFIG_NAND_SPL
-	tlbentry(CFG_BOOT_BASE_ADDR, SZ_16M, CFG_BOOT_BASE_ADDR, 4, AC_R|AC_W|AC_X|SA_G) /* TLB 0 */
+	tlbentry(CONFIG_SYS_BOOT_BASE_ADDR, SZ_16M, CONFIG_SYS_BOOT_BASE_ADDR, 4, AC_R|AC_W|AC_X|SA_G) /* TLB 0 */
 #else
-	tlbentry(CFG_NAND_BOOT_SPL_SRC, SZ_4K, CFG_NAND_BOOT_SPL_SRC, 4, AC_R|AC_W|AC_X|SA_G)
-	tlbentry(CFG_SDRAM_BASE, SZ_256M, CFG_SDRAM_BASE, 0, AC_R|AC_W|AC_X|SA_G|SA_I)
+	tlbentry(CONFIG_SYS_NAND_BOOT_SPL_SRC, SZ_4K, CONFIG_SYS_NAND_BOOT_SPL_SRC, 4, AC_R|AC_W|AC_X|SA_G)
+	tlbentry(CONFIG_SYS_SDRAM_BASE, SZ_256M, CONFIG_SYS_SDRAM_BASE, 0, AC_R|AC_W|AC_X|SA_G|SA_I)
 	tlbentry(256 << 20, SZ_256M, 256 << 20, 0, AC_R|AC_W|AC_X|SA_G|SA_I)
 #endif
 
@@ -60,37 +60,54 @@ tlbtab:
 	 * routine.
 	 */
 
-#ifdef CFG_INIT_RAM_DCACHE
+#ifdef CONFIG_SYS_INIT_RAM_DCACHE
 	/* TLB-entry for init-ram in dcache (SA_I must be turned off!) */
-	tlbentry(CFG_INIT_RAM_ADDR, SZ_4K, CFG_INIT_RAM_ADDR, 0, AC_R|AC_W|AC_X|SA_G)
+	tlbentry(CONFIG_SYS_INIT_RAM_ADDR, SZ_4K, CONFIG_SYS_INIT_RAM_ADDR, 0, AC_R|AC_W|AC_X|SA_G)
 #endif
 
-	tlbentry(CFG_PCI_BASE, SZ_256M, 0x00000000, 0xC, AC_R|AC_W|SA_G|SA_I)
-	tlbentry(CFG_PCI_MEMBASE, SZ_256M, 0x20000000, 0xC, AC_R|AC_W|SA_G|SA_I)
-	tlbentry(CFG_PCIE_MEMBASE, SZ_256M, 0xB0000000, 0xD, AC_R|AC_W|SA_G|SA_I)
+	tlbentry(CONFIG_SYS_PCI_BASE, SZ_256M, 0x00000000, 0xC, AC_R|AC_W|SA_G|SA_I)
+	tlbentry(CONFIG_SYS_PCI_MEMBASE, SZ_256M, 0x20000000, 0xC, AC_R|AC_W|SA_G|SA_I)
+	tlbentry(CONFIG_SYS_PCIE_MEMBASE, SZ_256M, 0xB0000000, 0xD, AC_R|AC_W|SA_G|SA_I)
 
-	tlbentry(CFG_PCIE0_CFGBASE, SZ_16M, 0x00000000, 0xD, AC_R|AC_W|SA_G|SA_I)
-	tlbentry(CFG_PCIE1_CFGBASE, SZ_16M, 0x20000000, 0xD, AC_R|AC_W|SA_G|SA_I)
-	tlbentry(CFG_PCIE0_XCFGBASE, SZ_1K, 0x10000000, 0xD, AC_R|AC_W|SA_G|SA_I)
-	tlbentry(CFG_PCIE1_XCFGBASE, SZ_1K, 0x30000000, 0xD, AC_R|AC_W|SA_G|SA_I)
+	tlbentry(CONFIG_SYS_PCIE0_CFGBASE, SZ_16M, 0x00000000, 0xD, AC_R|AC_W|SA_G|SA_I)
+	tlbentry(CONFIG_SYS_PCIE1_CFGBASE, SZ_16M, 0x20000000, 0xD, AC_R|AC_W|SA_G|SA_I)
+	tlbentry(CONFIG_SYS_PCIE0_XCFGBASE, SZ_1K, 0x10000000, 0xD, AC_R|AC_W|SA_G|SA_I)
+	tlbentry(CONFIG_SYS_PCIE1_XCFGBASE, SZ_1K, 0x30000000, 0xD, AC_R|AC_W|SA_G|SA_I)
 
 	/* PCIe UTL register */
-	tlbentry(CFG_PCIE_BASE, SZ_16K, 0x08010000, 0xC, AC_R|AC_W|SA_G|SA_I)
+	tlbentry(CONFIG_SYS_PCIE_BASE, SZ_16K, 0x08010000, 0xC, AC_R|AC_W|SA_G|SA_I)
 
+#if !defined(CONFIG_ARCHES)
 	/* TLB-entry for NAND */
-	tlbentry(CFG_NAND_ADDR, SZ_16M, CFG_NAND_ADDR, 4, AC_R|AC_W|AC_X|SA_G|SA_I)
+	tlbentry(CONFIG_SYS_NAND_ADDR, SZ_16M, CONFIG_SYS_NAND_ADDR, 4, AC_R|AC_W|AC_X|SA_G|SA_I)
 
 	/* TLB-entry for CPLD */
-	tlbentry(CFG_BCSR_BASE, SZ_1K, CFG_BCSR_BASE, 4, AC_R|AC_W|SA_G|SA_I)
+	tlbentry(CONFIG_SYS_BCSR_BASE, SZ_1K, CONFIG_SYS_BCSR_BASE, 4, AC_R|AC_W|SA_G|SA_I)
+#else
+	/* TLB-entry for FPGA */
+	tlbentry(CONFIG_SYS_FPGA_BASE, SZ_16M, CONFIG_SYS_FPGA_BASE, 4, AC_R|AC_W|SA_G|SA_I)
+#endif
 
 	/* TLB-entry for OCM */
-	tlbentry(CFG_OCM_BASE, SZ_16K, 0x00040000, 4, AC_R|AC_W|AC_X|SA_I)
+	tlbentry(CONFIG_SYS_OCM_BASE, SZ_1M, 0x00000000, 4, AC_R|AC_W|AC_X|SA_I)
 
 	/* TLB-entry for Local Configuration registers => peripherals */
-	tlbentry(CFG_LOCAL_CONF_REGS, SZ_16M, CFG_LOCAL_CONF_REGS, 4, AC_R|AC_W|AC_X|SA_G|SA_I)
+	tlbentry(CONFIG_SYS_LOCAL_CONF_REGS, SZ_16M, CONFIG_SYS_LOCAL_CONF_REGS, 4, AC_R|AC_W|AC_X|SA_G|SA_I)
 
 	/* AHB: Internal USB Peripherals (USB, SATA) */
-	tlbentry(CFG_AHB_BASE, SZ_1M, 0xbff00000, 4, AC_R|AC_W|AC_X|SA_G|SA_I)
+	tlbentry(CONFIG_SYS_AHB_BASE, SZ_1M, 0xbff00000, 4, AC_R|AC_W|AC_X|SA_G|SA_I)
+
+#if defined(CONFIG_RAPIDIO)
+	/* TLB-entries for RapidIO (SRIO) */
+	tlbentry(CONFIG_SYS_SRGPL0_REG_BAR, SZ_16M, CONFIG_SYS_SRGPL0_REG_BAR,
+					0xD, AC_R|AC_W|SA_G|SA_I)
+	tlbentry(CONFIG_SYS_SRGPL0_CFG_BAR, SZ_16M, CONFIG_SYS_SRGPL0_CFG_BAR,
+					0xD, AC_R|AC_W|SA_G|SA_I)
+	tlbentry(CONFIG_SYS_SRGPL0_MNT_BAR, SZ_16M, CONFIG_SYS_SRGPL0_MNT_BAR,
+					0xD, AC_R|AC_W|SA_G|SA_I)
+	tlbentry(CONFIG_SYS_I2ODMA_BASE, SZ_1K,  0x00100000,
+					0x4, AC_R|AC_W|SA_G|SA_I)
+#endif
 
 	tlbtab_end
 
@@ -99,8 +116,8 @@ tlbtab:
 	 * For NAND booting the first TLB has to be reconfigured to full size
 	 * and with caching disabled after running from RAM!
 	 */
-#define TLB00	TLB0(CFG_BOOT_BASE_ADDR, SZ_256M)
-#define TLB01	TLB1(CFG_BOOT_BASE_ADDR, 1)
+#define TLB00	TLB0(CONFIG_SYS_BOOT_BASE_ADDR, SZ_256M)
+#define TLB01	TLB1(CONFIG_SYS_BOOT_BASE_ADDR, 1)
 #define TLB02	TLB2(AC_R|AC_W|AC_X|SA_G|SA_I)
 
 	.globl	reconfig_tlb0
diff --git a/board/amcc/canyonlands/u-boot-nand.lds b/board/amcc/canyonlands/u-boot-nand.lds
index 8a4b7f5d0..9f13d031a 100644
--- a/board/amcc/canyonlands/u-boot-nand.lds
+++ b/board/amcc/canyonlands/u-boot-nand.lds
@@ -57,7 +57,7 @@ SECTIONS
 
     /* Align to next NAND block */
     . = ALIGN(0x20000);
-    common/environment.o  (.ppcenv)
+    common/env_embedded.o  (.ppcenv)
     /* Keep some space here for redundant env and potential bad env blocks */
     . = ALIGN(0x80000);
 
@@ -129,6 +129,7 @@ SECTIONS
    *(.dynbss)
    *(.bss)
    *(COMMON)
+   . = ALIGN(4);
   }
 
   _end = . ;
diff --git a/board/amcc/canyonlands/u-boot.lds b/board/amcc/canyonlands/u-boot.lds
index 1783bc73f..f0db0b232 100644
--- a/board/amcc/canyonlands/u-boot.lds
+++ b/board/amcc/canyonlands/u-boot.lds
@@ -136,6 +136,7 @@ SECTIONS
    *(.dynbss)
    *(.bss)
    *(COMMON)
+   . = ALIGN(4);
   }
 
   _end = . ;
diff --git a/board/amcc/common/flash.c b/board/amcc/common/flash.c
index eba0511f2..9943c744b 100644
--- a/board/amcc/common/flash.c
+++ b/board/amcc/common/flash.c
@@ -35,13 +35,13 @@
 #include <ppc4xx.h>
 #include <asm/processor.h>
 
-flash_info_t flash_info[CFG_MAX_FLASH_BANKS];	/* info for FLASH chips */
+flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];	/* info for FLASH chips */
 
 /*-----------------------------------------------------------------------
  * Functions
  */
 static int write_word(flash_info_t * info, ulong dest, ulong data);
-#ifdef CFG_FLASH_2ND_16BIT_DEV
+#ifdef CONFIG_SYS_FLASH_2ND_16BIT_DEV
 static int write_word_1(flash_info_t * info, ulong dest, ulong data);
 static int write_word_2(flash_info_t * info, ulong dest, ulong data);
 static int flash_erase_1(flash_info_t * info, int s_first, int s_last);
@@ -171,7 +171,7 @@ void flash_print_info(flash_info_t * info)
 /*
  * The following code cannot be run from FLASH!
  */
-#ifdef CFG_FLASH_2ND_16BIT_DEV
+#ifdef CONFIG_SYS_FLASH_2ND_16BIT_DEV
 static ulong flash_get_size(vu_long * addr, flash_info_t * info)
 {
 	/* bit 0 used for big flash marking */
@@ -188,32 +188,32 @@ static ulong flash_get_size(vu_long * addr, flash_info_t * info)
 #endif
 {
 	short i;
-	CFG_FLASH_WORD_SIZE value;
+	CONFIG_SYS_FLASH_WORD_SIZE value;
 	ulong base = (ulong) addr;
-	volatile CFG_FLASH_WORD_SIZE *addr2 = (CFG_FLASH_WORD_SIZE *) addr;
+	volatile CONFIG_SYS_FLASH_WORD_SIZE *addr2 = (CONFIG_SYS_FLASH_WORD_SIZE *) addr;
 
 	DEBUGF("FLASH ADDR: %08x\n", (unsigned)addr);
 
 	/* Write auto select command: read Manufacturer ID */
-	addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00AA00AA;
-	addr2[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x00550055;
-	addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00900090;
+	addr2[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00AA00AA;
+	addr2[CONFIG_SYS_FLASH_ADDR1] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00550055;
+	addr2[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00900090;
 	udelay(1000);
 
 	value = addr2[0];
 	DEBUGF("FLASH MANUFACT: %x\n", value);
 
 	switch (value) {
-	case (CFG_FLASH_WORD_SIZE) AMD_MANUFACT:
+	case (CONFIG_SYS_FLASH_WORD_SIZE) AMD_MANUFACT:
 		info->flash_id = FLASH_MAN_AMD;
 		break;
-	case (CFG_FLASH_WORD_SIZE) FUJ_MANUFACT:
+	case (CONFIG_SYS_FLASH_WORD_SIZE) FUJ_MANUFACT:
 		info->flash_id = FLASH_MAN_FUJ;
 		break;
-	case (CFG_FLASH_WORD_SIZE) SST_MANUFACT:
+	case (CONFIG_SYS_FLASH_WORD_SIZE) SST_MANUFACT:
 		info->flash_id = FLASH_MAN_SST;
 		break;
-	case (CFG_FLASH_WORD_SIZE) STM_MANUFACT:
+	case (CONFIG_SYS_FLASH_WORD_SIZE) STM_MANUFACT:
 		info->flash_id = FLASH_MAN_STM;
 		break;
 	default:
@@ -227,67 +227,67 @@ static ulong flash_get_size(vu_long * addr, flash_info_t * info)
 	DEBUGF("\nFLASH DEVICEID: %x\n", value);
 
 	switch (value) {
-	case (CFG_FLASH_WORD_SIZE) AMD_ID_LV040B:
+	case (CONFIG_SYS_FLASH_WORD_SIZE) AMD_ID_LV040B:
 		info->flash_id += FLASH_AM040;
 		info->sector_count = 8;
 		info->size = 0x0080000;		/* => 512 KiB */
 		break;
 
-	case (CFG_FLASH_WORD_SIZE) AMD_ID_F040B:
+	case (CONFIG_SYS_FLASH_WORD_SIZE) AMD_ID_F040B:
 		info->flash_id += FLASH_AM040;
 		info->sector_count = 8;
 		info->size = 0x0080000;		/* => 512 KiB */
 		break;
 
-	case (CFG_FLASH_WORD_SIZE) STM_ID_M29W040B:
+	case (CONFIG_SYS_FLASH_WORD_SIZE) STM_ID_M29W040B:
 		info->flash_id += FLASH_AM040;
 		info->sector_count = 8;
 		info->size = 0x0080000;		/* => 512 KiB */
 		break;
 
-	case (CFG_FLASH_WORD_SIZE) AMD_ID_F016D:
+	case (CONFIG_SYS_FLASH_WORD_SIZE) AMD_ID_F016D:
 		info->flash_id += FLASH_AMD016;
 		info->sector_count = 32;
 		info->size = 0x00200000;	/* => 2 MiB */
 		break;
 
-	case (CFG_FLASH_WORD_SIZE) AMD_ID_LV033C:
+	case (CONFIG_SYS_FLASH_WORD_SIZE) AMD_ID_LV033C:
 		info->flash_id += FLASH_AMDLV033C;
 		info->sector_count = 64;
 		info->size = 0x00400000;	/* => 4 MiB */
 		break;
 
-	case (CFG_FLASH_WORD_SIZE) AMD_ID_LV400T:
+	case (CONFIG_SYS_FLASH_WORD_SIZE) AMD_ID_LV400T:
 		info->flash_id += FLASH_AM400T;
 		info->sector_count = 11;
 		info->size = 0x00080000;	/* => 512 KiB */
 		break;
 
-	case (CFG_FLASH_WORD_SIZE) AMD_ID_LV400B:
+	case (CONFIG_SYS_FLASH_WORD_SIZE) AMD_ID_LV400B:
 		info->flash_id += FLASH_AM400B;
 		info->sector_count = 11;
 		info->size = 0x00080000;	/* => 512 KiB */
 		break;
 
-	case (CFG_FLASH_WORD_SIZE) AMD_ID_LV800T:
+	case (CONFIG_SYS_FLASH_WORD_SIZE) AMD_ID_LV800T:
 		info->flash_id += FLASH_AM800T;
 		info->sector_count = 19;
 		info->size = 0x00100000;	/* => 1 MiB */
 		break;
 
-	case (CFG_FLASH_WORD_SIZE) AMD_ID_LV800B:
+	case (CONFIG_SYS_FLASH_WORD_SIZE) AMD_ID_LV800B:
 		info->flash_id += FLASH_AM800B;
 		info->sector_count = 19;
 		info->size = 0x00100000;	/* => 1 MiB */
 		break;
 
-	case (CFG_FLASH_WORD_SIZE) AMD_ID_LV160T:
+	case (CONFIG_SYS_FLASH_WORD_SIZE) AMD_ID_LV160T:
 		info->flash_id += FLASH_AM160T;
 		info->sector_count = 35;
 		info->size = 0x00200000;	/* => 2 MiB */
 		break;
 
-	case (CFG_FLASH_WORD_SIZE) AMD_ID_LV160B:
+	case (CONFIG_SYS_FLASH_WORD_SIZE) AMD_ID_LV160B:
 		info->flash_id += FLASH_AM160B;
 		info->sector_count = 35;
 		info->size = 0x00200000;	/* => 2 MiB */
@@ -331,14 +331,14 @@ static ulong flash_get_size(vu_long * addr, flash_info_t * info)
 	for (i = 0; i < info->sector_count; i++) {
 		/* read sector protection at sector address, (A7 .. A0) = 0x02 */
 		/* D0 = 1 if protected */
-		addr2 = (volatile CFG_FLASH_WORD_SIZE *)(info->start[i]);
+		addr2 = (volatile CONFIG_SYS_FLASH_WORD_SIZE *)(info->start[i]);
 
 		/* For AMD29033C flash we need to resend the command of *
 		 * reading flash protection for upper 8 Mb of flash     */
 		if (i == 32) {
-			addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0xAAAAAAAA;
-			addr2[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x55555555;
-			addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x90909090;
+			addr2[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0xAAAAAAAA;
+			addr2[CONFIG_SYS_FLASH_ADDR1] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x55555555;
+			addr2[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x90909090;
 		}
 
 		if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST)
@@ -348,7 +348,7 @@ static ulong flash_get_size(vu_long * addr, flash_info_t * info)
 	}
 
 	/* issue bank reset to return to read mode */
-	addr2[0] = (CFG_FLASH_WORD_SIZE) 0x00F000F0;
+	addr2[0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00F000F0;
 
 	return (info->size);
 }
@@ -356,14 +356,14 @@ static ulong flash_get_size(vu_long * addr, flash_info_t * info)
 static int wait_for_DQ7_1(flash_info_t * info, int sect)
 {
 	ulong start, now, last;
-	volatile CFG_FLASH_WORD_SIZE *addr =
-	    (CFG_FLASH_WORD_SIZE *) (info->start[sect]);
+	volatile CONFIG_SYS_FLASH_WORD_SIZE *addr =
+	    (CONFIG_SYS_FLASH_WORD_SIZE *) (info->start[sect]);
 
 	start = get_timer(0);
 	last = start;
-	while ((addr[0] & (CFG_FLASH_WORD_SIZE) 0x00800080) !=
-	       (CFG_FLASH_WORD_SIZE) 0x00800080) {
-		if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+	while ((addr[0] & (CONFIG_SYS_FLASH_WORD_SIZE) 0x00800080) !=
+	       (CONFIG_SYS_FLASH_WORD_SIZE) 0x00800080) {
+		if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
 			printf("Timeout\n");
 			return -1;
 		}
@@ -376,7 +376,7 @@ static int wait_for_DQ7_1(flash_info_t * info, int sect)
 	return 0;
 }
 
-#ifdef CFG_FLASH_2ND_16BIT_DEV
+#ifdef CONFIG_SYS_FLASH_2ND_16BIT_DEV
 int flash_erase(flash_info_t * info, int s_first, int s_last)
 {
 	if (((info->flash_id & FLASH_TYPEMASK) == FLASH_AM320B) ||
@@ -394,8 +394,8 @@ static int flash_erase_1(flash_info_t * info, int s_first, int s_last)
 int flash_erase(flash_info_t * info, int s_first, int s_last)
 #endif
 {
-	volatile CFG_FLASH_WORD_SIZE *addr = (CFG_FLASH_WORD_SIZE *) (info->start[0]);
-	volatile CFG_FLASH_WORD_SIZE *addr2;
+	volatile CONFIG_SYS_FLASH_WORD_SIZE *addr = (CONFIG_SYS_FLASH_WORD_SIZE *) (info->start[0]);
+	volatile CONFIG_SYS_FLASH_WORD_SIZE *addr2;
 	int flag, prot, sect, l_sect;
 	int i;
 
@@ -435,24 +435,24 @@ int flash_erase(flash_info_t * info, int s_first, int s_last)
 	/* Start erase on unprotected sectors */
 	for (sect = s_first; sect <= s_last; sect++) {
 		if (info->protect[sect] == 0) {	/* not protected */
-			addr2 = (CFG_FLASH_WORD_SIZE *) (info->start[sect]);
+			addr2 = (CONFIG_SYS_FLASH_WORD_SIZE *) (info->start[sect]);
 
 			if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) {
-				addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00AA00AA;
-				addr[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x00550055;
-				addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00800080;
-				addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00AA00AA;
-				addr[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x00550055;
-				addr2[0] = (CFG_FLASH_WORD_SIZE) 0x00500050;	/* block erase */
+				addr[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00AA00AA;
+				addr[CONFIG_SYS_FLASH_ADDR1] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00550055;
+				addr[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00800080;
+				addr[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00AA00AA;
+				addr[CONFIG_SYS_FLASH_ADDR1] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00550055;
+				addr2[0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00500050;	/* block erase */
 				for (i = 0; i < 50; i++)
 					udelay(1000);	/* wait 1 ms */
 			} else {
-				addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00AA00AA;
-				addr[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x00550055;
-				addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00800080;
-				addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00AA00AA;
-				addr[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x00550055;
-				addr2[0] = (CFG_FLASH_WORD_SIZE) 0x00300030;	/* sector erase */
+				addr[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00AA00AA;
+				addr[CONFIG_SYS_FLASH_ADDR1] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00550055;
+				addr[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00800080;
+				addr[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00AA00AA;
+				addr[CONFIG_SYS_FLASH_ADDR1] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00550055;
+				addr2[0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00300030;	/* sector erase */
 			}
 			l_sect = sect;
 			/*
@@ -474,8 +474,8 @@ int flash_erase(flash_info_t * info, int s_first, int s_last)
 	udelay(1000);
 
 	/* reset to read mode */
-	addr = (CFG_FLASH_WORD_SIZE *) info->start[0];
-	addr[0] = (CFG_FLASH_WORD_SIZE) 0x00F000F0;	/* reset bank */
+	addr = (CONFIG_SYS_FLASH_WORD_SIZE *) info->start[0];
+	addr[0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00F000F0;	/* reset bank */
 
 	printf(" done\n");
 	return 0;
@@ -557,7 +557,7 @@ int write_buff(flash_info_t * info, uchar * src, ulong addr, ulong cnt)
  * 1 - write timeout
  * 2 - Flash not erased
  */
-#ifdef CFG_FLASH_2ND_16BIT_DEV
+#ifdef CONFIG_SYS_FLASH_2ND_16BIT_DEV
 static int write_word(flash_info_t * info, ulong dest, ulong data)
 {
 	if (((info->flash_id & FLASH_TYPEMASK) == FLASH_AM320B) ||
@@ -575,9 +575,9 @@ static int write_word_1(flash_info_t * info, ulong dest, ulong data)
 static int write_word(flash_info_t * info, ulong dest, ulong data)
 #endif
 {
-	volatile CFG_FLASH_WORD_SIZE *addr2 = (CFG_FLASH_WORD_SIZE *) (info->start[0]);
-	volatile CFG_FLASH_WORD_SIZE *dest2 = (CFG_FLASH_WORD_SIZE *) dest;
-	volatile CFG_FLASH_WORD_SIZE *data2 = (CFG_FLASH_WORD_SIZE *) & data;
+	volatile CONFIG_SYS_FLASH_WORD_SIZE *addr2 = (CONFIG_SYS_FLASH_WORD_SIZE *) (info->start[0]);
+	volatile CONFIG_SYS_FLASH_WORD_SIZE *dest2 = (CONFIG_SYS_FLASH_WORD_SIZE *) dest;
+	volatile CONFIG_SYS_FLASH_WORD_SIZE *data2 = (CONFIG_SYS_FLASH_WORD_SIZE *) & data;
 	ulong start;
 	int i;
 
@@ -586,15 +586,15 @@ static int write_word(flash_info_t * info, ulong dest, ulong data)
 		return (2);
 	}
 
-	for (i = 0; i < 4 / sizeof(CFG_FLASH_WORD_SIZE); i++) {
+	for (i = 0; i < 4 / sizeof(CONFIG_SYS_FLASH_WORD_SIZE); i++) {
 		int flag;
 
 		/* Disable interrupts which might cause a timeout here */
 		flag = disable_interrupts();
 
-		addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00AA00AA;
-		addr2[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x00550055;
-		addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00A000A0;
+		addr2[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00AA00AA;
+		addr2[CONFIG_SYS_FLASH_ADDR1] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00550055;
+		addr2[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00A000A0;
 
 		dest2[i] = data2[i];
 
@@ -604,10 +604,10 @@ static int write_word(flash_info_t * info, ulong dest, ulong data)
 
 		/* data polling for D7 */
 		start = get_timer(0);
-		while ((dest2[i] & (CFG_FLASH_WORD_SIZE) 0x00800080) !=
-		       (data2[i] & (CFG_FLASH_WORD_SIZE) 0x00800080)) {
+		while ((dest2[i] & (CONFIG_SYS_FLASH_WORD_SIZE) 0x00800080) !=
+		       (data2[i] & (CONFIG_SYS_FLASH_WORD_SIZE) 0x00800080)) {
 
-			if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+			if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
 				return (1);
 			}
 		}
@@ -616,10 +616,10 @@ static int write_word(flash_info_t * info, ulong dest, ulong data)
 	return (0);
 }
 
-#ifdef CFG_FLASH_2ND_16BIT_DEV
+#ifdef CONFIG_SYS_FLASH_2ND_16BIT_DEV
 
-#undef  CFG_FLASH_WORD_SIZE
-#define CFG_FLASH_WORD_SIZE unsigned short
+#undef  CONFIG_SYS_FLASH_WORD_SIZE
+#define CONFIG_SYS_FLASH_WORD_SIZE unsigned short
 
 /*
  * The following code cannot be run from FLASH!
@@ -628,35 +628,35 @@ static ulong flash_get_size_2(vu_long * addr, flash_info_t * info)
 {
 	short i;
 	int n;
-	CFG_FLASH_WORD_SIZE value;
+	CONFIG_SYS_FLASH_WORD_SIZE value;
 	ulong base = (ulong) addr;
-	volatile CFG_FLASH_WORD_SIZE *addr2 = (CFG_FLASH_WORD_SIZE *) addr;
+	volatile CONFIG_SYS_FLASH_WORD_SIZE *addr2 = (CONFIG_SYS_FLASH_WORD_SIZE *) addr;
 
 	DEBUGF("FLASH ADDR: %08x\n", (unsigned)addr);
 
 	/* Write auto select command: read Manufacturer ID */
-	addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00AA00AA;
-	addr2[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x00550055;
-	addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00900090;
+	addr2[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00AA00AA;
+	addr2[CONFIG_SYS_FLASH_ADDR1] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00550055;
+	addr2[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00900090;
 	udelay(1000);
 
 	value = addr2[0];
 	DEBUGF("FLASH MANUFACT: %x\n", value);
 
 	switch (value) {
-	case (CFG_FLASH_WORD_SIZE) AMD_MANUFACT:
+	case (CONFIG_SYS_FLASH_WORD_SIZE) AMD_MANUFACT:
 		info->flash_id = FLASH_MAN_AMD;
 		break;
-	case (CFG_FLASH_WORD_SIZE) FUJ_MANUFACT:
+	case (CONFIG_SYS_FLASH_WORD_SIZE) FUJ_MANUFACT:
 		info->flash_id = FLASH_MAN_FUJ;
 		break;
-	case (CFG_FLASH_WORD_SIZE) SST_MANUFACT:
+	case (CONFIG_SYS_FLASH_WORD_SIZE) SST_MANUFACT:
 		info->flash_id = FLASH_MAN_SST;
 		break;
-	case (CFG_FLASH_WORD_SIZE) STM_MANUFACT:
+	case (CONFIG_SYS_FLASH_WORD_SIZE) STM_MANUFACT:
 		info->flash_id = FLASH_MAN_STM;
 		break;
-	case (CFG_FLASH_WORD_SIZE) MX_MANUFACT:
+	case (CONFIG_SYS_FLASH_WORD_SIZE) MX_MANUFACT:
 		info->flash_id = FLASH_MAN_MX;
 		break;
 	default:
@@ -672,22 +672,22 @@ static ulong flash_get_size_2(vu_long * addr, flash_info_t * info)
 
 	switch (value) {
 
-	case (CFG_FLASH_WORD_SIZE)AMD_ID_LV320T:
+	case (CONFIG_SYS_FLASH_WORD_SIZE)AMD_ID_LV320T:
 		info->flash_id += FLASH_AM320T;
 		info->sector_count = 71;
 		info->size = 0x00400000;  break;	/* => 4 MiB	*/
 
-	case (CFG_FLASH_WORD_SIZE)AMD_ID_LV320B:
+	case (CONFIG_SYS_FLASH_WORD_SIZE)AMD_ID_LV320B:
 		info->flash_id += FLASH_AM320B;
 		info->sector_count = 71;
 		info->size = 0x00400000;  break;	/* => 4 MiB	*/
 
-	case (CFG_FLASH_WORD_SIZE)STM_ID_29W320DT:
+	case (CONFIG_SYS_FLASH_WORD_SIZE)STM_ID_29W320DT:
 		info->flash_id += FLASH_STMW320DT;
 		info->sector_count = 67;
 		info->size = 0x00400000;  break;	/* => 4 MiB	*/
 
-	case (CFG_FLASH_WORD_SIZE)MX_ID_LV320T:
+	case (CONFIG_SYS_FLASH_WORD_SIZE)MX_ID_LV320T:
 		info->flash_id += FLASH_MXLV320T;
 		info->sector_count = 71;
 		info->size = 0x00400000;
@@ -776,14 +776,14 @@ static ulong flash_get_size_2(vu_long * addr, flash_info_t * info)
 	for (i = 0; i < info->sector_count; i++) {
 		/* read sector protection at sector address, (A7 .. A0) = 0x02 */
 		/* D0 = 1 if protected */
-		addr2 = (volatile CFG_FLASH_WORD_SIZE *)(info->start[i]);
+		addr2 = (volatile CONFIG_SYS_FLASH_WORD_SIZE *)(info->start[i]);
 
 		/* For AMD29033C flash we need to resend the command of *
 		 * reading flash protection for upper 8 Mb of flash     */
 		if (i == 32) {
-			addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0xAAAAAAAA;
-			addr2[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x55555555;
-			addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x90909090;
+			addr2[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0xAAAAAAAA;
+			addr2[CONFIG_SYS_FLASH_ADDR1] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x55555555;
+			addr2[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x90909090;
 		}
 
 		if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST)
@@ -793,7 +793,7 @@ static ulong flash_get_size_2(vu_long * addr, flash_info_t * info)
 	}
 
 	/* issue bank reset to return to read mode */
-	addr2[0] = (CFG_FLASH_WORD_SIZE) 0x00F000F0;
+	addr2[0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00F000F0;
 
 	return (info->size);
 }
@@ -801,14 +801,14 @@ static ulong flash_get_size_2(vu_long * addr, flash_info_t * info)
 static int wait_for_DQ7_2(flash_info_t * info, int sect)
 {
 	ulong start, now, last;
-	volatile CFG_FLASH_WORD_SIZE *addr =
-	    (CFG_FLASH_WORD_SIZE *) (info->start[sect]);
+	volatile CONFIG_SYS_FLASH_WORD_SIZE *addr =
+	    (CONFIG_SYS_FLASH_WORD_SIZE *) (info->start[sect]);
 
 	start = get_timer(0);
 	last = start;
-	while ((addr[0] & (CFG_FLASH_WORD_SIZE) 0x00800080) !=
-	       (CFG_FLASH_WORD_SIZE) 0x00800080) {
-		if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+	while ((addr[0] & (CONFIG_SYS_FLASH_WORD_SIZE) 0x00800080) !=
+	       (CONFIG_SYS_FLASH_WORD_SIZE) 0x00800080) {
+		if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
 			printf("Timeout\n");
 			return -1;
 		}
@@ -823,8 +823,8 @@ static int wait_for_DQ7_2(flash_info_t * info, int sect)
 
 static int flash_erase_2(flash_info_t * info, int s_first, int s_last)
 {
-	volatile CFG_FLASH_WORD_SIZE *addr = (CFG_FLASH_WORD_SIZE *) (info->start[0]);
-	volatile CFG_FLASH_WORD_SIZE *addr2;
+	volatile CONFIG_SYS_FLASH_WORD_SIZE *addr = (CONFIG_SYS_FLASH_WORD_SIZE *) (info->start[0]);
+	volatile CONFIG_SYS_FLASH_WORD_SIZE *addr2;
 	int flag, prot, sect, l_sect;
 	int i;
 
@@ -864,24 +864,24 @@ static int flash_erase_2(flash_info_t * info, int s_first, int s_last)
 	/* Start erase on unprotected sectors */
 	for (sect = s_first; sect <= s_last; sect++) {
 		if (info->protect[sect] == 0) {	/* not protected */
-			addr2 = (CFG_FLASH_WORD_SIZE *) (info->start[sect]);
+			addr2 = (CONFIG_SYS_FLASH_WORD_SIZE *) (info->start[sect]);
 
 			if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) {
-				addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00AA00AA;
-				addr[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x00550055;
-				addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00800080;
-				addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00AA00AA;
-				addr[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x00550055;
-				addr2[0] = (CFG_FLASH_WORD_SIZE) 0x00500050;	/* block erase */
+				addr[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00AA00AA;
+				addr[CONFIG_SYS_FLASH_ADDR1] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00550055;
+				addr[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00800080;
+				addr[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00AA00AA;
+				addr[CONFIG_SYS_FLASH_ADDR1] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00550055;
+				addr2[0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00500050;	/* block erase */
 				for (i = 0; i < 50; i++)
 					udelay(1000);	/* wait 1 ms */
 			} else {
-				addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00AA00AA;
-				addr[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x00550055;
-				addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00800080;
-				addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00AA00AA;
-				addr[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x00550055;
-				addr2[0] = (CFG_FLASH_WORD_SIZE) 0x00300030;	/* sector erase */
+				addr[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00AA00AA;
+				addr[CONFIG_SYS_FLASH_ADDR1] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00550055;
+				addr[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00800080;
+				addr[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00AA00AA;
+				addr[CONFIG_SYS_FLASH_ADDR1] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00550055;
+				addr2[0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00300030;	/* sector erase */
 			}
 			l_sect = sect;
 			/*
@@ -903,8 +903,8 @@ static int flash_erase_2(flash_info_t * info, int s_first, int s_last)
 	udelay(1000);
 
 	/* reset to read mode */
-	addr = (CFG_FLASH_WORD_SIZE *) info->start[0];
-	addr[0] = (CFG_FLASH_WORD_SIZE) 0x00F000F0;	/* reset bank */
+	addr = (CONFIG_SYS_FLASH_WORD_SIZE *) info->start[0];
+	addr[0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00F000F0;	/* reset bank */
 
 	printf(" done\n");
 	return 0;
@@ -912,9 +912,9 @@ static int flash_erase_2(flash_info_t * info, int s_first, int s_last)
 
 static int write_word_2(flash_info_t * info, ulong dest, ulong data)
 {
-	volatile CFG_FLASH_WORD_SIZE *addr2 = (CFG_FLASH_WORD_SIZE *) (info->start[0]);
-	volatile CFG_FLASH_WORD_SIZE *dest2 = (CFG_FLASH_WORD_SIZE *) dest;
-	volatile CFG_FLASH_WORD_SIZE *data2 = (CFG_FLASH_WORD_SIZE *) & data;
+	volatile CONFIG_SYS_FLASH_WORD_SIZE *addr2 = (CONFIG_SYS_FLASH_WORD_SIZE *) (info->start[0]);
+	volatile CONFIG_SYS_FLASH_WORD_SIZE *dest2 = (CONFIG_SYS_FLASH_WORD_SIZE *) dest;
+	volatile CONFIG_SYS_FLASH_WORD_SIZE *data2 = (CONFIG_SYS_FLASH_WORD_SIZE *) & data;
 	ulong start;
 	int i;
 
@@ -923,15 +923,15 @@ static int write_word_2(flash_info_t * info, ulong dest, ulong data)
 		return (2);
 	}
 
-	for (i = 0; i < 4 / sizeof(CFG_FLASH_WORD_SIZE); i++) {
+	for (i = 0; i < 4 / sizeof(CONFIG_SYS_FLASH_WORD_SIZE); i++) {
 		int flag;
 
 		/* Disable interrupts which might cause a timeout here */
 		flag = disable_interrupts();
 
-		addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00AA00AA;
-		addr2[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x00550055;
-		addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00A000A0;
+		addr2[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00AA00AA;
+		addr2[CONFIG_SYS_FLASH_ADDR1] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00550055;
+		addr2[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00A000A0;
 
 		dest2[i] = data2[i];
 
@@ -941,10 +941,10 @@ static int write_word_2(flash_info_t * info, ulong dest, ulong data)
 
 		/* data polling for D7 */
 		start = get_timer(0);
-		while ((dest2[i] & (CFG_FLASH_WORD_SIZE) 0x00800080) !=
-		       (data2[i] & (CFG_FLASH_WORD_SIZE) 0x00800080)) {
+		while ((dest2[i] & (CONFIG_SYS_FLASH_WORD_SIZE) 0x00800080) !=
+		       (data2[i] & (CONFIG_SYS_FLASH_WORD_SIZE) 0x00800080)) {
 
-			if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+			if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
 				return (1);
 			}
 		}
@@ -952,4 +952,4 @@ static int write_word_2(flash_info_t * info, ulong dest, ulong data)
 
 	return (0);
 }
-#endif /* CFG_FLASH_2ND_16BIT_DEV */
+#endif /* CONFIG_SYS_FLASH_2ND_16BIT_DEV */
diff --git a/board/amcc/ebony/config.mk b/board/amcc/ebony/config.mk
index e5722dd36..60d3bf4d2 100644
--- a/board/amcc/ebony/config.mk
+++ b/board/amcc/ebony/config.mk
@@ -40,5 +40,5 @@ PLATFORM_CPPFLAGS += -DDEBUG
 endif
 
 ifeq ($(dbcr),1)
-PLATFORM_CPPFLAGS += -DCFG_INIT_DBCR=0x8cff0000
+PLATFORM_CPPFLAGS += -DCONFIG_SYS_INIT_DBCR=0x8cff0000
 endif
diff --git a/board/amcc/ebony/ebony.c b/board/amcc/ebony/ebony.c
index 9bcdf5997..ad09e6207 100644
--- a/board/amcc/ebony/ebony.c
+++ b/board/amcc/ebony/ebony.c
@@ -35,7 +35,7 @@ long int fixed_sdram(void);
 int board_early_init_f(void)
 {
 	uint reg;
-	unsigned char *fpga_base = (unsigned char *)CFG_FPGA_BASE;
+	unsigned char *fpga_base = (unsigned char *)CONFIG_SYS_FPGA_BASE;
 	unsigned char status;
 
 	/*--------------------------------------------------------------------
@@ -204,7 +204,7 @@ int pci_pre_init(struct pci_controller *hose)
  *	may not be sufficient for a given board.
  *
  ************************************************************************/
-#if defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT)
+#if defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT)
 void pci_target_init(struct pci_controller *hose)
 {
 	/*--------------------------------------------------------------------------+
@@ -219,7 +219,7 @@ void pci_target_init(struct pci_controller *hose)
 	 * Map all of SDRAM to PCI address 0x0000_0000. Note that the 440 strapping
      * options to not support sizes such as 128/256 MB.
 	 *--------------------------------------------------------------------------*/
-	out32r(PCIX0_PIM0LAL, CFG_SDRAM_BASE);
+	out32r(PCIX0_PIM0LAL, CONFIG_SYS_SDRAM_BASE);
 	out32r(PCIX0_PIM0LAH, 0);
 	out32r(PCIX0_PIM0SA, ~(gd->ram_size - 1) | 1);
 
@@ -228,12 +228,12 @@ void pci_target_init(struct pci_controller *hose)
 	/*--------------------------------------------------------------------------+
 	 * Program the board's subsystem id/vendor id
 	 *--------------------------------------------------------------------------*/
-	out16r(PCIX0_SBSYSVID, CFG_PCI_SUBSYS_VENDORID);
-	out16r(PCIX0_SBSYSID, CFG_PCI_SUBSYS_DEVICEID);
+	out16r(PCIX0_SBSYSVID, CONFIG_SYS_PCI_SUBSYS_VENDORID);
+	out16r(PCIX0_SBSYSID, CONFIG_SYS_PCI_SUBSYS_DEVICEID);
 
 	out16r(PCIX0_CMD, in16r(PCIX0_CMD) | PCI_COMMAND_MEMORY);
 }
-#endif				/* defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT) */
+#endif				/* defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT) */
 
 /*************************************************************************
  *  is_pci_host
diff --git a/board/amcc/ebony/flash.c b/board/amcc/ebony/flash.c
index e8fbbc493..8fe3ba1b8 100644
--- a/board/amcc/ebony/flash.c
+++ b/board/amcc/ebony/flash.c
@@ -50,7 +50,7 @@
 #define     FLASH_ONBD_N_VAL        2
 #define     FLASH_SRAM_SEL_VAL      1
 
-static unsigned long flash_addr_table[8][CFG_MAX_FLASH_BANKS] = {
+static unsigned long flash_addr_table[8][CONFIG_SYS_MAX_FLASH_BANKS] = {
 	{0xffc00000, 0xffe00000, 0xff880000},	/* 0:000: configuraton 3 */
 	{0xffc00000, 0xffe00000, 0xff800000},	/* 1:001: configuraton 4 */
 	{0xffc00000, 0xffe00000, 0x00000000},	/* 2:010: configuraton 7 */
@@ -74,8 +74,8 @@ static ulong flash_get_size(vu_long * addr, flash_info_t * info);
 unsigned long flash_init(void)
 {
 	unsigned long total_b = 0;
-	unsigned long size_b[CFG_MAX_FLASH_BANKS];
-	unsigned char *fpga_base = (unsigned char *)CFG_FPGA_BASE;
+	unsigned long size_b[CONFIG_SYS_MAX_FLASH_BANKS];
+	unsigned char *fpga_base = (unsigned char *)CONFIG_SYS_FPGA_BASE;
 	unsigned char switch_status;
 	unsigned short index = 0;
 	int i;
@@ -98,7 +98,7 @@ unsigned long flash_init(void)
 	DEBUGF("FLASH: Index: %d\n", index);
 
 	/* Init: no FLASHes known */
-	for (i = 0; i < CFG_MAX_FLASH_BANKS; ++i) {
+	for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
 		flash_info[i].flash_id = FLASH_UNKNOWN;
 		flash_info[i].sector_count = -1;
 		flash_info[i].size = 0;
@@ -121,15 +121,15 @@ unsigned long flash_init(void)
 		}
 
 		/* Monitor protection ON by default */
-		(void)flash_protect(FLAG_PROTECT_SET, CFG_MONITOR_BASE,
-				    CFG_MONITOR_BASE + CFG_MONITOR_LEN - 1,
+		(void)flash_protect(FLAG_PROTECT_SET, CONFIG_SYS_MONITOR_BASE,
+				    CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN - 1,
 				    &flash_info[2]);
-#ifdef CFG_ENV_IS_IN_FLASH
-		(void)flash_protect(FLAG_PROTECT_SET, CFG_ENV_ADDR,
-				    CFG_ENV_ADDR + CFG_ENV_SECT_SIZE - 1,
+#ifdef CONFIG_ENV_IS_IN_FLASH
+		(void)flash_protect(FLAG_PROTECT_SET, CONFIG_ENV_ADDR,
+				    CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE - 1,
 				    &flash_info[2]);
-		(void)flash_protect(FLAG_PROTECT_SET, CFG_ENV_ADDR_REDUND,
-				    CFG_ENV_ADDR_REDUND + CFG_ENV_SECT_SIZE - 1,
+		(void)flash_protect(FLAG_PROTECT_SET, CONFIG_ENV_ADDR_REDUND,
+				    CONFIG_ENV_ADDR_REDUND + CONFIG_ENV_SECT_SIZE - 1,
 				    &flash_info[2]);
 #endif
 
diff --git a/board/amcc/ebony/init.S b/board/amcc/ebony/init.S
index c86076e80..811a96a1f 100644
--- a/board/amcc/ebony/init.S
+++ b/board/amcc/ebony/init.S
@@ -49,9 +49,9 @@ tlbtab:
 	 * routine.
 	 */
 
-	tlbentry(CFG_PERIPHERAL_BASE, SZ_256M, 0x40000000, 1, AC_R|AC_W|SA_G|SA_I)
-	tlbentry(CFG_ISRAM_BASE, SZ_4K, 0x80000000, 0, AC_R|AC_W|AC_X)
-	tlbentry(CFG_ISRAM_BASE + 0x1000, SZ_4K, 0x80001000, 0, AC_R|AC_W|AC_X)
-	tlbentry(CFG_PCI_BASE, SZ_256M, 0x00000000, 2, AC_R|AC_W|SA_G|SA_I)
-	tlbentry(CFG_PCI_MEMBASE, SZ_256M, 0x00000000, 3, AC_R|AC_W|SA_G|SA_I)
+	tlbentry(CONFIG_SYS_PERIPHERAL_BASE, SZ_256M, 0x40000000, 1, AC_R|AC_W|SA_G|SA_I)
+	tlbentry(CONFIG_SYS_ISRAM_BASE, SZ_4K, 0x80000000, 0, AC_R|AC_W|AC_X)
+	tlbentry(CONFIG_SYS_ISRAM_BASE + 0x1000, SZ_4K, 0x80001000, 0, AC_R|AC_W|AC_X)
+	tlbentry(CONFIG_SYS_PCI_BASE, SZ_256M, 0x00000000, 2, AC_R|AC_W|SA_G|SA_I)
+	tlbentry(CONFIG_SYS_PCI_MEMBASE, SZ_256M, 0x00000000, 3, AC_R|AC_W|SA_G|SA_I)
 	tlbtab_end
diff --git a/board/amcc/ebony/u-boot.lds b/board/amcc/ebony/u-boot.lds
index 6be4bd102..17d1ba85f 100644
--- a/board/amcc/ebony/u-boot.lds
+++ b/board/amcc/ebony/u-boot.lds
@@ -137,6 +137,7 @@ SECTIONS
    *(.dynbss)
    *(.bss)
    *(COMMON)
+   . = ALIGN(4);
   }
   _end = . ;
   PROVIDE (end = .);
diff --git a/board/amcc/katmai/cmd_katmai.c b/board/amcc/katmai/cmd_katmai.c
index 703d22560..ba71bd55c 100644
--- a/board/amcc/katmai/cmd_katmai.c
+++ b/board/amcc/katmai/cmd_katmai.c
@@ -57,9 +57,9 @@ static int do_bootstrap(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 
 	do {
 #ifdef	CONFIG_STRESS
-		printf("enter cpu clock frequency 400, 500, 533, 667 Mhz or quit to abort\n");
+		printf("enter cpu clock frequency 400, 500, 533, 667 MHz or quit to abort\n");
 #else
-		printf("enter cpu clock frequency 400, 500, 533 Mhz or quit to abort\n");
+		printf("enter cpu clock frequency 400, 500, 533 MHz or quit to abort\n");
 #endif
 		nbytes = readline (" ? ");
 
@@ -87,11 +87,11 @@ static int do_bootstrap(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 	else {
 		do {
 			if (strcmp(cpuClock, "400") == 0)
-				printf("enter plb clock frequency 100, 133 Mhz or quit to abort\n");
+				printf("enter plb clock frequency 100, 133 MHz or quit to abort\n");
 
 #ifdef	CONFIG_STRESS
 			if (strcmp(cpuClock, "667") == 0)
-				printf("enter plb clock frequency 133, 166 Mhz or quit to abort\n");
+				printf("enter plb clock frequency 133, 166 MHz or quit to abort\n");
 
 #endif
 			nbytes = readline (" ? ");
@@ -117,7 +117,7 @@ static int do_bootstrap(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 	}
 
 	do {
-		printf("enter Pci-X clock frequency 33, 66, 100 or 133 Mhz or quit to abort\n");
+		printf("enter Pci-X clock frequency 33, 66, 100 or 133 MHz or quit to abort\n");
 		nbytes = readline (" ? ");
 
 		if (strcmp(console_buffer, "quit") == 0)
@@ -133,10 +133,10 @@ static int do_bootstrap(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 
 	} while (nbytes == 0);
 
-	printf("\nsys clk   = %sMhz\n", sysClock);
-	printf("cpu clk   = %sMhz\n", cpuClock);
-	printf("plb clk   = %sMhz\n", plbClock);
-	printf("Pci-X clk = %sMhz\n", pcixClock);
+	printf("\nsys clk   = %s MHz\n", sysClock);
+	printf("cpu clk   = %s MHz\n", cpuClock);
+	printf("plb clk   = %s MHz\n", plbClock);
+	printf("Pci-X clk = %s MHz\n", pcixClock);
 
 	do {
 		printf("\npress [y] to write I2C bootstrap \n");
diff --git a/board/amcc/katmai/config.mk b/board/amcc/katmai/config.mk
index c512b53c6..ef0cf9672 100644
--- a/board/amcc/katmai/config.mk
+++ b/board/amcc/katmai/config.mk
@@ -34,5 +34,5 @@ PLATFORM_CPPFLAGS += -DDEBUG
 endif
 
 ifeq ($(dbcr),1)
-PLATFORM_CPPFLAGS += -DCFG_INIT_DBCR=0x8cff0000
+PLATFORM_CPPFLAGS += -DCONFIG_SYS_INIT_DBCR=0x8cff0000
 endif
diff --git a/board/amcc/katmai/init.S b/board/amcc/katmai/init.S
index e3f3da6bd..1c74a82c3 100644
--- a/board/amcc/katmai/init.S
+++ b/board/amcc/katmai/init.S
@@ -59,20 +59,20 @@ tlbtabA:
 	 * routine.
 	 */
 
-	tlbentry(CFG_ISRAM_BASE, SZ_256K, 0x00000000, 4, AC_R|AC_W|AC_X|SA_I)
-	tlbentry(CFG_PERIPHERAL_BASE, SZ_4K, 0xF0000000, 4, AC_R|AC_W|SA_G|SA_I)
-
-	tlbentry(CFG_PCI_BASE, SZ_256M, 0x00000000, 0xC, AC_R|AC_W|SA_G|SA_I)
-	tlbentry(CFG_PCI_MEMBASE, SZ_256M, 0x10000000, 0xC, AC_R|AC_W|SA_G|SA_I)
-	tlbentry(CFG_PCIE_MEMBASE, SZ_256M, 0xB0000000, 0xD, AC_R|AC_W|SA_G|SA_I)
-	tlbentry(CFG_PCIE_BASE, SZ_16K, 0x20000000, 0xC, AC_R|AC_W|SA_G|SA_I)
-
-	tlbentry(CFG_PCIE0_CFGBASE, SZ_16M, 0x40000000, 0xC, AC_R|AC_W|SA_G|SA_I)
-	tlbentry(CFG_PCIE1_CFGBASE, SZ_16M, 0x80000000, 0xC, AC_R|AC_W|SA_G|SA_I)
-	tlbentry(CFG_PCIE2_CFGBASE, SZ_16M, 0xC0000000, 0xC, AC_R|AC_W|SA_G|SA_I)
-	tlbentry(CFG_PCIE0_XCFGBASE, SZ_1K, 0x50000000, 0xC, AC_R|AC_W|SA_G|SA_I)
-	tlbentry(CFG_PCIE1_XCFGBASE, SZ_1K, 0x90000000, 0xC, AC_R|AC_W|SA_G|SA_I)
-	tlbentry(CFG_PCIE2_XCFGBASE, SZ_1K, 0xD0000000, 0xC, AC_R|AC_W|SA_G|SA_I)
+	tlbentry(CONFIG_SYS_ISRAM_BASE, SZ_256K, 0x00000000, 4, AC_R|AC_W|AC_X|SA_I)
+	tlbentry(CONFIG_SYS_PERIPHERAL_BASE, SZ_4K, 0xF0000000, 4, AC_R|AC_W|SA_G|SA_I)
+
+	tlbentry(CONFIG_SYS_PCI_BASE, SZ_256M, 0x00000000, 0xC, AC_R|AC_W|SA_G|SA_I)
+	tlbentry(CONFIG_SYS_PCI_MEMBASE, SZ_256M, 0x10000000, 0xC, AC_R|AC_W|SA_G|SA_I)
+	tlbentry(CONFIG_SYS_PCIE_MEMBASE, SZ_256M, 0xB0000000, 0xD, AC_R|AC_W|SA_G|SA_I)
+	tlbentry(CONFIG_SYS_PCIE_BASE, SZ_16K, 0x20000000, 0xC, AC_R|AC_W|SA_G|SA_I)
+
+	tlbentry(CONFIG_SYS_PCIE0_CFGBASE, SZ_16M, 0x40000000, 0xC, AC_R|AC_W|SA_G|SA_I)
+	tlbentry(CONFIG_SYS_PCIE1_CFGBASE, SZ_16M, 0x80000000, 0xC, AC_R|AC_W|SA_G|SA_I)
+	tlbentry(CONFIG_SYS_PCIE2_CFGBASE, SZ_16M, 0xC0000000, 0xC, AC_R|AC_W|SA_G|SA_I)
+	tlbentry(CONFIG_SYS_PCIE0_XCFGBASE, SZ_1K, 0x50000000, 0xC, AC_R|AC_W|SA_G|SA_I)
+	tlbentry(CONFIG_SYS_PCIE1_XCFGBASE, SZ_1K, 0x90000000, 0xC, AC_R|AC_W|SA_G|SA_I)
+	tlbentry(CONFIG_SYS_PCIE2_XCFGBASE, SZ_1K, 0xD0000000, 0xC, AC_R|AC_W|SA_G|SA_I)
 	tlbtab_end
 
 /**************************************************************************
@@ -99,20 +99,20 @@ tlbtabB:
 	 * routine.
 	 */
 
-	tlbentry(CFG_ISRAM_BASE, SZ_256K, 0x00000000, 4, AC_R|AC_W|AC_X|SA_I)
+	tlbentry(CONFIG_SYS_ISRAM_BASE, SZ_256K, 0x00000000, 4, AC_R|AC_W|AC_X|SA_I)
 
-	tlbentry(CFG_PERIPHERAL_BASE, SZ_4K, 0xF0000000, 4, AC_R|AC_W|SA_G|SA_I)
+	tlbentry(CONFIG_SYS_PERIPHERAL_BASE, SZ_4K, 0xF0000000, 4, AC_R|AC_W|SA_G|SA_I)
 
-	tlbentry(CFG_ACE_BASE, SZ_1K, CFG_ACE_BASE, 4,AC_R|AC_W|SA_G|SA_I)
+	tlbentry(CONFIG_SYS_ACE_BASE, SZ_1K, CONFIG_SYS_ACE_BASE, 4,AC_R|AC_W|SA_G|SA_I)
 
-	tlbentry(CFG_PCI_BASE, SZ_256M, 0x00000000, 0xC, AC_R|AC_W|SA_G|SA_I)
-	tlbentry(CFG_PCI_MEMBASE, SZ_256M, 0x10000000, 0xC, AC_R|AC_W|SA_G|SA_I)
-	tlbentry(CFG_PCIE_MEMBASE, SZ_256M, 0xB0000000, 0xD, AC_R|AC_W|SA_G|SA_I)
+	tlbentry(CONFIG_SYS_PCI_BASE, SZ_256M, 0x00000000, 0xC, AC_R|AC_W|SA_G|SA_I)
+	tlbentry(CONFIG_SYS_PCI_MEMBASE, SZ_256M, 0x10000000, 0xC, AC_R|AC_W|SA_G|SA_I)
+	tlbentry(CONFIG_SYS_PCIE_MEMBASE, SZ_256M, 0xB0000000, 0xD, AC_R|AC_W|SA_G|SA_I)
 
-	tlbentry(CFG_PCIE0_CFGBASE, SZ_16M, 0x00000000, 0xD, AC_R|AC_W|SA_G|SA_I)
-	tlbentry(CFG_PCIE1_CFGBASE, SZ_16M, 0x20000000, 0xD, AC_R|AC_W|SA_G|SA_I)
-	tlbentry(CFG_PCIE2_CFGBASE, SZ_16M, 0x40000000, 0xD, AC_R|AC_W|SA_G|SA_I)
-	tlbentry(CFG_PCIE0_XCFGBASE, SZ_1K, 0x10000000, 0xD, AC_R|AC_W|SA_G|SA_I)
-	tlbentry(CFG_PCIE1_XCFGBASE, SZ_1K, 0x30000000, 0xD, AC_R|AC_W|SA_G|SA_I)
-	tlbentry(CFG_PCIE2_XCFGBASE, SZ_1K, 0x50000000, 0xD, AC_R|AC_W|SA_G|SA_I)
+	tlbentry(CONFIG_SYS_PCIE0_CFGBASE, SZ_16M, 0x00000000, 0xD, AC_R|AC_W|SA_G|SA_I)
+	tlbentry(CONFIG_SYS_PCIE1_CFGBASE, SZ_16M, 0x20000000, 0xD, AC_R|AC_W|SA_G|SA_I)
+	tlbentry(CONFIG_SYS_PCIE2_CFGBASE, SZ_16M, 0x40000000, 0xD, AC_R|AC_W|SA_G|SA_I)
+	tlbentry(CONFIG_SYS_PCIE0_XCFGBASE, SZ_1K, 0x10000000, 0xD, AC_R|AC_W|SA_G|SA_I)
+	tlbentry(CONFIG_SYS_PCIE1_XCFGBASE, SZ_1K, 0x30000000, 0xD, AC_R|AC_W|SA_G|SA_I)
+	tlbentry(CONFIG_SYS_PCIE2_XCFGBASE, SZ_1K, 0x50000000, 0xD, AC_R|AC_W|SA_G|SA_I)
 	tlbtab_end
diff --git a/board/amcc/katmai/katmai.c b/board/amcc/katmai/katmai.c
index 08d89d779..b6c0c11ef 100644
--- a/board/amcc/katmai/katmai.c
+++ b/board/amcc/katmai/katmai.c
@@ -27,6 +27,7 @@
 #include <i2c.h>
 #include <libfdt.h>
 #include <fdt_support.h>
+#include <netdev.h>
 #include <asm/processor.h>
 #include <asm/io.h>
 #include <asm/gpio.h>
@@ -223,11 +224,11 @@ int board_early_init_f (void)
 	mfr |= SDR0_MFR_FIXD;		/* Workaround for PCI/DMA */
 	mtsdr(sdr_mfr, mfr);
 
-	mtsdr(SDR0_PFC0, CFG_PFC0);
+	mtsdr(SDR0_PFC0, CONFIG_SYS_PFC0);
 
-	out32(GPIO0_OR, CFG_GPIO_OR);
-	out32(GPIO0_ODR, CFG_GPIO_ODR);
-	out32(GPIO0_TCR, CFG_GPIO_TCR);
+	out32(GPIO0_OR, CONFIG_SYS_GPIO_OR);
+	out32(GPIO0_ODR, CONFIG_SYS_GPIO_ODR);
+	out32(GPIO0_TCR, CONFIG_SYS_GPIO_TCR);
 
 	return 0;
 }
@@ -297,7 +298,7 @@ int pci_pre_init(struct pci_controller * hose )
  *	may not be sufficient for a given board.
  *
  ************************************************************************/
-#if defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT)
+#if defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT)
 void pci_target_init(struct pci_controller * hose )
 {
 	/*-------------------------------------------------------------------+
@@ -312,7 +313,7 @@ void pci_target_init(struct pci_controller * hose )
 	 * Map all of SDRAM to PCI address 0x0000_0000. Note that the 440
 	 * strapping options to not support sizes such as 128/256 MB.
 	 *-------------------------------------------------------------------*/
-	out32r( PCIX0_PIM0LAL, CFG_SDRAM_BASE );
+	out32r( PCIX0_PIM0LAL, CONFIG_SYS_SDRAM_BASE );
 	out32r( PCIX0_PIM0LAH, 0 );
 	out32r( PCIX0_PIM0SA, ~(gd->ram_size - 1) | 1 );
 	out32r( PCIX0_BAR0, 0 );
@@ -320,12 +321,12 @@ void pci_target_init(struct pci_controller * hose )
 	/*-------------------------------------------------------------------+
 	 * Program the board's subsystem id/vendor id
 	 *-------------------------------------------------------------------*/
-	out16r( PCIX0_SBSYSVID, CFG_PCI_SUBSYS_VENDORID );
-	out16r( PCIX0_SBSYSID, CFG_PCI_SUBSYS_DEVICEID );
+	out16r( PCIX0_SBSYSVID, CONFIG_SYS_PCI_SUBSYS_VENDORID );
+	out16r( PCIX0_SBSYSID, CONFIG_SYS_PCI_SUBSYS_DEVICEID );
 
 	out16r( PCIX0_CMD, in16r(PCIX0_CMD) | PCI_COMMAND_MEMORY );
 }
-#endif	/* defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT) */
+#endif	/* defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT) */
 
 #if defined(CONFIG_PCI)
 /*************************************************************************
@@ -356,11 +357,11 @@ static int katmai_pcie_card_present(int port)
 	val = in32(GPIO0_IR);
 	switch (port) {
 	case 0:
-		return !(val & GPIO_VAL(CFG_GPIO_PCIE_PRESENT0));
+		return !(val & GPIO_VAL(CONFIG_SYS_GPIO_PCIE_PRESENT0));
 	case 1:
-		return !(val & GPIO_VAL(CFG_GPIO_PCIE_PRESENT1));
+		return !(val & GPIO_VAL(CONFIG_SYS_GPIO_PCIE_PRESENT1));
 	case 2:
-		return !(val & GPIO_VAL(CFG_GPIO_PCIE_PRESENT2));
+		return !(val & GPIO_VAL(CONFIG_SYS_GPIO_PCIE_PRESENT2));
 	default:
 		return 0;
 	}
@@ -403,9 +404,9 @@ void pcie_setup_hoses(int busno)
 
 		/* setup mem resource */
 		pci_set_region(hose->regions + 0,
-			       CFG_PCIE_MEMBASE + i * CFG_PCIE_MEMSIZE,
-			       CFG_PCIE_MEMBASE + i * CFG_PCIE_MEMSIZE,
-			       CFG_PCIE_MEMSIZE,
+			       CONFIG_SYS_PCIE_MEMBASE + i * CONFIG_SYS_PCIE_MEMSIZE,
+			       CONFIG_SYS_PCIE_MEMBASE + i * CONFIG_SYS_PCIE_MEMSIZE,
+			       CONFIG_SYS_PCIE_MEMSIZE,
 			       PCI_REGION_MEM);
 		hose->region_count = 1;
 		pci_register_hose(hose);
@@ -447,3 +448,8 @@ int post_hotkeys_pressed(void)
 	return (ctrlc());
 }
 #endif
+
+int board_eth_init(bd_t *bis)
+{
+	return pci_eth_init(bis);
+}
diff --git a/board/amcc/katmai/u-boot.lds b/board/amcc/katmai/u-boot.lds
index 36aa6de12..464bc6ecc 100644
--- a/board/amcc/katmai/u-boot.lds
+++ b/board/amcc/katmai/u-boot.lds
@@ -134,6 +134,7 @@ SECTIONS
    *(.dynbss)
    *(.bss)
    *(COMMON)
+   . = ALIGN(4);
   }
   _end = . ;
   PROVIDE (end = .);
diff --git a/board/amcc/kilauea/cmd_pll.c b/board/amcc/kilauea/cmd_pll.c
index 0d2f27fe5..0f571fefe 100644
--- a/board/amcc/kilauea/cmd_pll.c
+++ b/board/amcc/kilauea/cmd_pll.c
@@ -48,7 +48,7 @@
 	do {								\
 		int __i;						\
 		for (__i = 0; __i < 2; __i++)				\
-			eeprom_write (CFG_I2C_EEPROM_ADDR,		\
+			eeprom_write (CONFIG_SYS_I2C_EEPROM_ADDR,		\
 				      EEPROM_CONF_OFFSET + __i*BUF_STEP, \
 				      pll_select[freq],			\
 				      BUF_STEP + __i*BUF_STEP);		\
@@ -151,7 +151,7 @@ pll_debug(int off)
 	uchar buffer[EEPROM_SDSTP_PARAM];
 
 	memset(buffer, 0, sizeof(buffer));
-	eeprom_read(CFG_I2C_EEPROM_ADDR, off,
+	eeprom_read(CONFIG_SYS_I2C_EEPROM_ADDR, off,
 		    buffer, EEPROM_SDSTP_PARAM);
 
 	printf("Debug: SDSTP[0-3] at offset \"0x%02x\" lists as follows: \n", off);
@@ -168,9 +168,9 @@ test_write(void)
 	/*
 	 * Write twice, 8 bytes per write
 	 */
-	eeprom_write (CFG_I2C_EEPROM_ADDR, EEPROM_TEST_OFFSET,
+	eeprom_write (CONFIG_SYS_I2C_EEPROM_ADDR, EEPROM_TEST_OFFSET,
 		      testbuf, 8);
-	eeprom_write (CFG_I2C_EEPROM_ADDR, EEPROM_TEST_OFFSET+8,
+	eeprom_write (CONFIG_SYS_I2C_EEPROM_ADDR, EEPROM_TEST_OFFSET+8,
 		      testbuf, 16);
 	printf("done\n");
 
@@ -236,7 +236,7 @@ ret:
 }
 
 U_BOOT_CMD(
-	pllalter, CFG_MAXARGS, 1,        do_pll_alter,
+	pllalter, CONFIG_SYS_MAXARGS, 1,        do_pll_alter,
 	"pllalter- change pll frequence \n",
 	"pllalter <selection>      - change pll frequence \n\n\
 	** New freq take effect after reset. ** \n\
diff --git a/board/amcc/kilauea/kilauea.c b/board/amcc/kilauea/kilauea.c
index 7b1025526..7e84a61a9 100644
--- a/board/amcc/kilauea/kilauea.c
+++ b/board/amcc/kilauea/kilauea.c
@@ -36,7 +36,7 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
-extern flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips	*/
+extern flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips	*/
 
 /*
  * Board early initialization function
@@ -197,7 +197,7 @@ int board_early_init_f (void)
 		SDR0_CUST0_NDFC_ENABLE |
 		SDR0_CUST0_NDFC_BW_8_BIT |
 		SDR0_CUST0_NRB_BUSY |
-		(0x80000000 >> (28 + CFG_NAND_CS));
+		(0x80000000 >> (28 + CONFIG_SYS_NAND_CS));
 	mtsdr(SDR0_CUST0, val);
 
 	/*
@@ -210,19 +210,19 @@ int board_early_init_f (void)
 	/*
 	 * Configure FPGA register with PCIe reset
 	 */
-	out_be32((void *)CFG_FPGA_BASE, 0xff570cc4);	/* assert PCIe reset */
+	out_be32((void *)CONFIG_SYS_FPGA_BASE, 0xff570cc4);	/* assert PCIe reset */
 	mdelay(50);
-	out_be32((void *)CFG_FPGA_BASE, 0xff570cc7);	/* deassert PCIe reset */
+	out_be32((void *)CONFIG_SYS_FPGA_BASE, 0xff570cc7);	/* deassert PCIe reset */
 
 	return 0;
 }
 
 int misc_init_r(void)
 {
-#ifdef CFG_ENV_IS_IN_FLASH
+#ifdef CONFIG_ENV_IS_IN_FLASH
 	/* Monitor protection ON by default */
 	flash_protect(FLAG_PROTECT_SET,
-		      -CFG_MONITOR_LEN,
+		      -CONFIG_SYS_MONITOR_LEN,
 		      0xffffffff,
 		      &flash_info[0]);
 #endif
@@ -330,9 +330,9 @@ void pcie_setup_hoses(int busno)
 
 		/* setup mem resource */
 		pci_set_region(hose->regions + 0,
-			       CFG_PCIE_MEMBASE + i * CFG_PCIE_MEMSIZE,
-			       CFG_PCIE_MEMBASE + i * CFG_PCIE_MEMSIZE,
-			       CFG_PCIE_MEMSIZE,
+			       CONFIG_SYS_PCIE_MEMBASE + i * CONFIG_SYS_PCIE_MEMSIZE,
+			       CONFIG_SYS_PCIE_MEMBASE + i * CONFIG_SYS_PCIE_MEMSIZE,
+			       CONFIG_SYS_PCIE_MEMSIZE,
 			       PCI_REGION_MEM);
 		hose->region_count = 1;
 		pci_register_hose(hose);
diff --git a/board/amcc/kilauea/u-boot-nand.lds b/board/amcc/kilauea/u-boot-nand.lds
index cbdc0b050..799c28ffd 100644
--- a/board/amcc/kilauea/u-boot-nand.lds
+++ b/board/amcc/kilauea/u-boot-nand.lds
@@ -57,7 +57,7 @@ SECTIONS
 
     /* Align to next NAND block */
     . = ALIGN(0x4000);
-    common/environment.o  (.ppcenv)
+    common/env_embedded.o  (.ppcenv)
     /* Keep some space here for redundant env and potential bad env blocks */
     . = ALIGN(0x10000);
 
@@ -129,6 +129,7 @@ SECTIONS
    *(.dynbss)
    *(.bss)
    *(COMMON)
+   . = ALIGN(4);
   }
 
   _end = . ;
diff --git a/board/amcc/kilauea/u-boot.lds b/board/amcc/kilauea/u-boot.lds
index fe51ca1bf..0ac21e391 100644
--- a/board/amcc/kilauea/u-boot.lds
+++ b/board/amcc/kilauea/u-boot.lds
@@ -130,6 +130,7 @@ SECTIONS
    *(.dynbss)
    *(.bss)
    *(COMMON)
+   . = ALIGN(4);
   }
   _end = . ;
   PROVIDE (end = .);
diff --git a/board/amcc/luan/config.mk b/board/amcc/luan/config.mk
index f52c20617..cd02aab57 100644
--- a/board/amcc/luan/config.mk
+++ b/board/amcc/luan/config.mk
@@ -40,5 +40,5 @@ PLATFORM_CPPFLAGS += -DDEBUG
 endif
 
 ifeq ($(dbcr),1)
-PLATFORM_CPPFLAGS += -DCFG_INIT_DBCR=0x8cff0000
+PLATFORM_CPPFLAGS += -DCONFIG_SYS_INIT_DBCR=0x8cff0000
 endif
diff --git a/board/amcc/luan/flash.c b/board/amcc/luan/flash.c
index d3c3c0d05..2d3b15438 100644
--- a/board/amcc/luan/flash.c
+++ b/board/amcc/luan/flash.c
@@ -42,7 +42,7 @@
 #define DEBUGF(x...)
 #endif				/* DEBUG */
 
-static unsigned long flash_addr_table[1][CFG_MAX_FLASH_BANKS] = {
+static unsigned long flash_addr_table[1][CONFIG_SYS_MAX_FLASH_BANKS] = {
 	{0xff900000, 0xff980000, 0xffc00000},	/* 0:000: configuraton 3 */
 };
 
@@ -59,7 +59,7 @@ static ulong flash_get_size(vu_long * addr, flash_info_t * info);
 unsigned long flash_init(void)
 {
 	unsigned long total_b = 0;
-	unsigned long size_b[CFG_MAX_FLASH_BANKS];
+	unsigned long size_b[CONFIG_SYS_MAX_FLASH_BANKS];
 	unsigned short index = 0;
 	int i;
 
@@ -69,7 +69,7 @@ unsigned long flash_init(void)
 	DEBUGF("FLASH: Index: %d\n", index);
 
 	/* Init: no FLASHes known */
-	for (i = 0; i < CFG_MAX_FLASH_BANKS; ++i) {
+	for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
 		flash_info[i].flash_id = FLASH_UNKNOWN;
 		flash_info[i].sector_count = -1;
 		flash_info[i].size = 0;
@@ -92,15 +92,15 @@ unsigned long flash_init(void)
 		}
 
 		/* Monitor protection ON by default */
-		(void)flash_protect(FLAG_PROTECT_SET, CFG_MONITOR_BASE,
-				    CFG_MONITOR_BASE + CFG_MONITOR_LEN - 1,
+		(void)flash_protect(FLAG_PROTECT_SET, CONFIG_SYS_MONITOR_BASE,
+				    CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN - 1,
 				    &flash_info[2]);
-#ifdef CFG_ENV_IS_IN_FLASH
-		(void)flash_protect(FLAG_PROTECT_SET, CFG_ENV_ADDR,
-				    CFG_ENV_ADDR + CFG_ENV_SECT_SIZE - 1,
+#ifdef CONFIG_ENV_IS_IN_FLASH
+		(void)flash_protect(FLAG_PROTECT_SET, CONFIG_ENV_ADDR,
+				    CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE - 1,
 				    &flash_info[2]);
-		(void)flash_protect(FLAG_PROTECT_SET, CFG_ENV_ADDR_REDUND,
-				    CFG_ENV_ADDR_REDUND + CFG_ENV_SECT_SIZE - 1,
+		(void)flash_protect(FLAG_PROTECT_SET, CONFIG_ENV_ADDR_REDUND,
+				    CONFIG_ENV_ADDR_REDUND + CONFIG_ENV_SECT_SIZE - 1,
 				    &flash_info[2]);
 #endif
 
diff --git a/board/amcc/luan/init.S b/board/amcc/luan/init.S
index d5ee117df..fb54dea3a 100644
--- a/board/amcc/luan/init.S
+++ b/board/amcc/luan/init.S
@@ -54,7 +54,7 @@ tlbtab:
 	tlbentry(0xffd00000, SZ_1M, 0xffd00000, 1, AC_R|AC_W|AC_X|SA_G|SA_I)
 	tlbentry(0xffe00000, SZ_1M, 0xffe00000, 1, AC_R|AC_W|AC_X|SA_G|SA_I)
 	tlbentry(0xff900000, SZ_1M, 0xff900000, 1, AC_R|AC_W|AC_X|SA_G|SA_I)
-	tlbentry(CFG_EPLD_BASE, SZ_256K, 0xff000000, 1, AC_R|AC_W|SA_G|SA_I)
+	tlbentry(CONFIG_SYS_EPLD_BASE, SZ_256K, 0xff000000, 1, AC_R|AC_W|SA_G|SA_I)
 
 	/*
 	 * TLB entries for SDRAM are not needed on this platform.
@@ -63,12 +63,12 @@ tlbtab:
 	 */
 
 	/* internal ram (l2 cache) */
-	tlbentry(CFG_ISRAM_BASE, SZ_256K, 0x80000000, 0, AC_R|AC_W|AC_X|SA_I)
+	tlbentry(CONFIG_SYS_ISRAM_BASE, SZ_256K, 0x80000000, 0, AC_R|AC_W|AC_X|SA_I)
 
 	/* peripherals at f0000000 */
-	tlbentry(CFG_PERIPHERAL_BASE, SZ_4K, CFG_PERIPHERAL_BASE, 1, AC_R|AC_W|SA_G|SA_I)
+	tlbentry(CONFIG_SYS_PERIPHERAL_BASE, SZ_4K, CONFIG_SYS_PERIPHERAL_BASE, 1, AC_R|AC_W|SA_G|SA_I)
 
 	/* PCI */
-	tlbentry(CFG_PCI_BASE, SZ_256M, 0x00000000, 9, AC_R|AC_W|SA_G|SA_I)
-	tlbentry(CFG_PCI_MEMBASE, SZ_256M, 0x10000000, 9, AC_R|AC_W|SA_G|SA_I)
+	tlbentry(CONFIG_SYS_PCI_BASE, SZ_256M, 0x00000000, 9, AC_R|AC_W|SA_G|SA_I)
+	tlbentry(CONFIG_SYS_PCI_MEMBASE, SZ_256M, 0x10000000, 9, AC_R|AC_W|SA_G|SA_I)
 	tlbtab_end
diff --git a/board/amcc/luan/luan.c b/board/amcc/luan/luan.c
index b14b6e1b5..de3e3d8b9 100644
--- a/board/amcc/luan/luan.c
+++ b/board/amcc/luan/luan.c
@@ -25,12 +25,13 @@
 #include <command.h>
 #include <ppc4xx.h>
 #include <asm/processor.h>
+#include <asm/ppc4xx-isram.h>
 #include <spd_sdram.h>
 #include "epld.h"
 
 DECLARE_GLOBAL_DATA_PTR;
 
-extern flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
+extern flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */
 
 
 /*************************************************************************
@@ -80,7 +81,7 @@ int board_early_init_f(void)
  ************************************************************************/
 int misc_init_r(void)
 {
-	volatile epld_t *x = (epld_t *) CFG_EPLD_BASE;
+	volatile epld_t *x = (epld_t *) CONFIG_SYS_EPLD_BASE;
 
 	/* set modes of operation */
 	x->ethuart |= EPLD2_ETH_MODE_10 | EPLD2_ETH_MODE_100 |
@@ -166,7 +167,7 @@ int pci_pre_init( struct pci_controller *hose )
  *	may not be sufficient for a given board.
  *
  ************************************************************************/
-#if defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT)
+#if defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT)
 void pci_target_init(struct pci_controller *hose)
 {
 	/*--------------------------------------------------------------------------+
@@ -181,7 +182,7 @@ void pci_target_init(struct pci_controller *hose)
 	 * Map all of SDRAM to PCI address 0x0000_0000. Note that the 440 strapping
 	 * options to not support sizes such as 128/256 MB.
 	 *--------------------------------------------------------------------------*/
-	out32r( PCIX0_PIM0LAL, CFG_SDRAM_BASE );
+	out32r( PCIX0_PIM0LAL, CONFIG_SYS_SDRAM_BASE );
 	out32r( PCIX0_PIM0LAH, 0 );
 	out32r( PCIX0_PIM0SA, ~(gd->ram_size - 1) | 1 );
 
@@ -190,12 +191,12 @@ void pci_target_init(struct pci_controller *hose)
 	/*--------------------------------------------------------------------------+
 	 * Program the board's subsystem id/vendor id
 	 *--------------------------------------------------------------------------*/
-	out16r( PCIX0_SBSYSVID, CFG_PCI_SUBSYS_VENDORID );
-	out16r( PCIX0_SBSYSID, CFG_PCI_SUBSYS_DEVICEID );
+	out16r( PCIX0_SBSYSVID, CONFIG_SYS_PCI_SUBSYS_VENDORID );
+	out16r( PCIX0_SBSYSID, CONFIG_SYS_PCI_SUBSYS_DEVICEID );
 
 	out16r( PCIX0_CMD, in16r(PCIX0_CMD) | PCI_COMMAND_MEMORY );
 }
-#endif /* defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT) */
+#endif /* defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT) */
 
 
 /*************************************************************************
@@ -255,7 +256,7 @@ static int on_off( const char *s )
  ************************************************************************/
 static void l2cache_disable(void)
 {
-	mtdcr( l2_cache_cfg, 0 );
+	mtdcr( L2_CACHE_CFG, 0 );
 }
 
 
@@ -265,24 +266,24 @@ static void l2cache_disable(void)
  ************************************************************************/
 static void l2cache_enable(void)	/* see p258 7.4.1 Enabling L2 Cache */
 {
-	mtdcr( l2_cache_cfg, 0x80000000 );	/* enable L2_MODE L2_CFG[L2M] */
+	mtdcr( L2_CACHE_CFG, 0x80000000 );	/* enable L2_MODE L2_CFG[L2M] */
 
-	mtdcr( l2_cache_addr, 0 );		/* set L2_ADDR with all zeros */
+	mtdcr( L2_CACHE_ADDR, 0 );		/* set L2_ADDR with all zeros */
 
-	mtdcr( l2_cache_cmd, 0x80000000 );	/* issue HCLEAR command via L2_CMD */
+	mtdcr( L2_CACHE_CMD, 0x80000000 );	/* issue HCLEAR command via L2_CMD */
 
-	while (!(mfdcr( l2_cache_stat ) & 0x80000000 ))  ;; /* poll L2_SR for completion */
+	while (!(mfdcr( L2_CACHE_STAT ) & 0x80000000 ))  ;; /* poll L2_SR for completion */
 
-	mtdcr( l2_cache_cmd, 0x10000000 );	/* clear cache errors L2_CMD[CCP] */
+	mtdcr( L2_CACHE_CMD, 0x10000000 );	/* clear cache errors L2_CMD[CCP] */
 
-	mtdcr( l2_cache_cmd, 0x08000000 );	/* clear tag errors L2_CMD[CTE] */
+	mtdcr( L2_CACHE_CMD, 0x08000000 );	/* clear tag errors L2_CMD[CTE] */
 
-	mtdcr( l2_cache_snp0, 0 );		/* snoop registers */
-	mtdcr( l2_cache_snp1, 0 );
+	mtdcr( L2_CACHE_SNP0, 0 );		/* snoop registers */
+	mtdcr( L2_CACHE_SNP1, 0 );
 
 	__asm__ volatile ("sync");		/* msync */
 
-	mtdcr( l2_cache_cfg, 0xe0000000 );	/* inst and data use L2 */
+	mtdcr( L2_CACHE_CFG, 0xe0000000 );	/* inst and data use L2 */
 
 	__asm__ volatile ("sync");
 }
@@ -294,7 +295,7 @@ static void l2cache_enable(void)	/* see p258 7.4.1 Enabling L2 Cache */
  ************************************************************************/
 static int l2cache_status(void)
 {
-	return  (mfdcr( l2_cache_cfg ) & 0x60000000) != 0;
+	return  (mfdcr( L2_CACHE_CFG ) & 0x60000000) != 0;
 }
 
 
diff --git a/board/amcc/luan/u-boot.lds b/board/amcc/luan/u-boot.lds
index 791178517..b66c768b4 100644
--- a/board/amcc/luan/u-boot.lds
+++ b/board/amcc/luan/u-boot.lds
@@ -137,6 +137,7 @@ SECTIONS
    *(.dynbss)
    *(.bss)
    *(COMMON)
+   . = ALIGN(4);
   }
   _end = . ;
   PROVIDE (end = .);
diff --git a/board/amcc/makalu/cmd_pll.c b/board/amcc/makalu/cmd_pll.c
index 0d2f27fe5..0f571fefe 100644
--- a/board/amcc/makalu/cmd_pll.c
+++ b/board/amcc/makalu/cmd_pll.c
@@ -48,7 +48,7 @@
 	do {								\
 		int __i;						\
 		for (__i = 0; __i < 2; __i++)				\
-			eeprom_write (CFG_I2C_EEPROM_ADDR,		\
+			eeprom_write (CONFIG_SYS_I2C_EEPROM_ADDR,		\
 				      EEPROM_CONF_OFFSET + __i*BUF_STEP, \
 				      pll_select[freq],			\
 				      BUF_STEP + __i*BUF_STEP);		\
@@ -151,7 +151,7 @@ pll_debug(int off)
 	uchar buffer[EEPROM_SDSTP_PARAM];
 
 	memset(buffer, 0, sizeof(buffer));
-	eeprom_read(CFG_I2C_EEPROM_ADDR, off,
+	eeprom_read(CONFIG_SYS_I2C_EEPROM_ADDR, off,
 		    buffer, EEPROM_SDSTP_PARAM);
 
 	printf("Debug: SDSTP[0-3] at offset \"0x%02x\" lists as follows: \n", off);
@@ -168,9 +168,9 @@ test_write(void)
 	/*
 	 * Write twice, 8 bytes per write
 	 */
-	eeprom_write (CFG_I2C_EEPROM_ADDR, EEPROM_TEST_OFFSET,
+	eeprom_write (CONFIG_SYS_I2C_EEPROM_ADDR, EEPROM_TEST_OFFSET,
 		      testbuf, 8);
-	eeprom_write (CFG_I2C_EEPROM_ADDR, EEPROM_TEST_OFFSET+8,
+	eeprom_write (CONFIG_SYS_I2C_EEPROM_ADDR, EEPROM_TEST_OFFSET+8,
 		      testbuf, 16);
 	printf("done\n");
 
@@ -236,7 +236,7 @@ ret:
 }
 
 U_BOOT_CMD(
-	pllalter, CFG_MAXARGS, 1,        do_pll_alter,
+	pllalter, CONFIG_SYS_MAXARGS, 1,        do_pll_alter,
 	"pllalter- change pll frequence \n",
 	"pllalter <selection>      - change pll frequence \n\n\
 	** New freq take effect after reset. ** \n\
diff --git a/board/amcc/makalu/makalu.c b/board/amcc/makalu/makalu.c
index 2b4d3d4b7..9fc0ec666 100644
--- a/board/amcc/makalu/makalu.c
+++ b/board/amcc/makalu/makalu.c
@@ -37,7 +37,7 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
-extern flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips	*/
+extern flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips	*/
 
 /*
  * Board early initialization function
@@ -194,9 +194,9 @@ int board_early_init_f (void)
 	mtsdr(SDR0_SRST, 0);
 
 	/* Reset PCIe slots */
-	gpio_write_bit(CFG_GPIO_PCIE_RST, 0);
+	gpio_write_bit(CONFIG_SYS_GPIO_PCIE_RST, 0);
 	udelay(100);
-	gpio_write_bit(CFG_GPIO_PCIE_RST, 1);
+	gpio_write_bit(CONFIG_SYS_GPIO_PCIE_RST, 1);
 
 	/*
 	 * Configure PFC (Pin Function Control) registers
@@ -210,10 +210,10 @@ int board_early_init_f (void)
 
 int misc_init_r(void)
 {
-#ifdef CFG_ENV_IS_IN_FLASH
+#ifdef CONFIG_ENV_IS_IN_FLASH
 	/* Monitor protection ON by default */
 	flash_protect(FLAG_PROTECT_SET,
-		      -CFG_MONITOR_LEN,
+		      -CONFIG_SYS_MONITOR_LEN,
 		      0xffffffff,
 		      &flash_info[0]);
 #endif
@@ -286,9 +286,9 @@ void pcie_setup_hoses(int busno)
 
 		/* setup mem resource */
 		pci_set_region(hose->regions + 0,
-			       CFG_PCIE_MEMBASE + i * CFG_PCIE_MEMSIZE,
-			       CFG_PCIE_MEMBASE + i * CFG_PCIE_MEMSIZE,
-			       CFG_PCIE_MEMSIZE,
+			       CONFIG_SYS_PCIE_MEMBASE + i * CONFIG_SYS_PCIE_MEMSIZE,
+			       CONFIG_SYS_PCIE_MEMBASE + i * CONFIG_SYS_PCIE_MEMSIZE,
+			       CONFIG_SYS_PCIE_MEMSIZE,
 			       PCI_REGION_MEM);
 		hose->region_count = 1;
 		pci_register_hose(hose);
diff --git a/board/amcc/makalu/u-boot.lds b/board/amcc/makalu/u-boot.lds
index fe51ca1bf..0ac21e391 100644
--- a/board/amcc/makalu/u-boot.lds
+++ b/board/amcc/makalu/u-boot.lds
@@ -130,6 +130,7 @@ SECTIONS
    *(.dynbss)
    *(.bss)
    *(COMMON)
+   . = ALIGN(4);
   }
   _end = . ;
   PROVIDE (end = .);
diff --git a/board/amcc/ocotea/config.mk b/board/amcc/ocotea/config.mk
index 9e1833591..b62e776d3 100644
--- a/board/amcc/ocotea/config.mk
+++ b/board/amcc/ocotea/config.mk
@@ -40,5 +40,5 @@ PLATFORM_CPPFLAGS += -DDEBUG
 endif
 
 ifeq ($(dbcr),1)
-PLATFORM_CPPFLAGS += -DCFG_INIT_DBCR=0x8cff0000
+PLATFORM_CPPFLAGS += -DCONFIG_SYS_INIT_DBCR=0x8cff0000
 endif
diff --git a/board/amcc/ocotea/flash.c b/board/amcc/ocotea/flash.c
index 5614e2078..a83f93afa 100644
--- a/board/amcc/ocotea/flash.c
+++ b/board/amcc/ocotea/flash.c
@@ -53,9 +53,9 @@
 #define     FLASH_ONBD_N_VAL        2
 #define     FLASH_SRAM_SEL_VAL      1
 
-flash_info_t flash_info[CFG_MAX_FLASH_BANKS];	/* info for FLASH chips        */
+flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];	/* info for FLASH chips        */
 
-static unsigned long flash_addr_table[8][CFG_MAX_FLASH_BANKS] = {
+static unsigned long flash_addr_table[8][CONFIG_SYS_MAX_FLASH_BANKS] = {
 	{0xFF800000, 0xFF880000, 0xFFC00000},	/* 0:000: configuraton 4 */
 	{0xFF900000, 0xFF980000, 0xFFC00000},	/* 1:001: configuraton 3 */
 	{0x00000000, 0x00000000, 0x00000000},	/* 2:010: configuraton 8 */
@@ -83,8 +83,8 @@ static int write_word(flash_info_t * info, ulong dest, ulong data);
 unsigned long flash_init(void)
 {
 	unsigned long total_b = 0;
-	unsigned long size_b[CFG_MAX_FLASH_BANKS];
-	unsigned char *fpga_base = (unsigned char *)CFG_FPGA_BASE;
+	unsigned long size_b[CONFIG_SYS_MAX_FLASH_BANKS];
+	unsigned char *fpga_base = (unsigned char *)CONFIG_SYS_FPGA_BASE;
 	unsigned char switch_status;
 	unsigned short index = 0;
 	int i;
@@ -107,7 +107,7 @@ unsigned long flash_init(void)
 	DEBUGF("FLASH: Index: %d\n", index);
 
 	/* Init: no FLASHes known */
-	for (i = 0; i < CFG_MAX_FLASH_BANKS; ++i) {
+	for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
 		flash_info[i].flash_id = FLASH_UNKNOWN;
 		flash_info[i].sector_count = -1;
 		flash_info[i].size = 0;
@@ -131,15 +131,15 @@ unsigned long flash_init(void)
 		}
 
 		/* Monitor protection ON by default */
-		(void)flash_protect(FLAG_PROTECT_SET, CFG_MONITOR_BASE,
-				    CFG_MONITOR_BASE + CFG_MONITOR_LEN - 1,
+		(void)flash_protect(FLAG_PROTECT_SET, CONFIG_SYS_MONITOR_BASE,
+				    CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN - 1,
 				    &flash_info[i]);
-#ifdef CFG_ENV_IS_IN_FLASH
-		(void)flash_protect(FLAG_PROTECT_SET, CFG_ENV_ADDR,
-				    CFG_ENV_ADDR + CFG_ENV_SECT_SIZE - 1,
+#ifdef CONFIG_ENV_IS_IN_FLASH
+		(void)flash_protect(FLAG_PROTECT_SET, CONFIG_ENV_ADDR,
+				    CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE - 1,
 				    &flash_info[i]);
-		(void)flash_protect(FLAG_PROTECT_SET, CFG_ENV_ADDR_REDUND,
-				    CFG_ENV_ADDR_REDUND + CFG_ENV_SECT_SIZE - 1,
+		(void)flash_protect(FLAG_PROTECT_SET, CONFIG_ENV_ADDR_REDUND,
+				    CONFIG_ENV_ADDR_REDUND + CONFIG_ENV_SECT_SIZE - 1,
 				    &flash_info[i]);
 #endif
 
diff --git a/board/amcc/ocotea/init.S b/board/amcc/ocotea/init.S
index d211c710b..8bcfbb197 100644
--- a/board/amcc/ocotea/init.S
+++ b/board/amcc/ocotea/init.S
@@ -49,9 +49,9 @@ tlbtab:
 	 * routine.
 	 */
 
-	tlbentry(CFG_PERIPHERAL_BASE, SZ_256M, 0x40000000, 1, AC_R|AC_W|SA_G|SA_I)
-	tlbentry(CFG_ISRAM_BASE, SZ_4K, 0x80000000, 0, AC_R|AC_W|AC_X)
-	tlbentry(CFG_ISRAM_BASE + 0x1000, SZ_4K, 0x80001000, 0, AC_R|AC_W|AC_X)
-	tlbentry(CFG_PCI_BASE, SZ_256M, 0x00000000, 2, AC_R|AC_W|SA_G|SA_I)
-	tlbentry(CFG_PCI_MEMBASE, SZ_256M, 0x00000000, 3, AC_R|AC_W|SA_G|SA_I)
+	tlbentry(CONFIG_SYS_PERIPHERAL_BASE, SZ_256M, 0x40000000, 1, AC_R|AC_W|SA_G|SA_I)
+	tlbentry(CONFIG_SYS_ISRAM_BASE, SZ_4K, 0x80000000, 0, AC_R|AC_W|AC_X)
+	tlbentry(CONFIG_SYS_ISRAM_BASE + 0x1000, SZ_4K, 0x80001000, 0, AC_R|AC_W|AC_X)
+	tlbentry(CONFIG_SYS_PCI_BASE, SZ_256M, 0x00000000, 2, AC_R|AC_W|SA_G|SA_I)
+	tlbentry(CONFIG_SYS_PCI_MEMBASE, SZ_256M, 0x00000000, 3, AC_R|AC_W|SA_G|SA_I)
 	tlbtab_end
diff --git a/board/amcc/ocotea/ocotea.c b/board/amcc/ocotea/ocotea.c
index 4d1d09321..fe4540849 100644
--- a/board/amcc/ocotea/ocotea.c
+++ b/board/amcc/ocotea/ocotea.c
@@ -42,7 +42,7 @@ void fpga_init (void);
 int board_early_init_f (void)
 {
 	unsigned long mfr;
-	unsigned char *fpga_base = (unsigned char *) CFG_FPGA_BASE;
+	unsigned char *fpga_base = (unsigned char *) CONFIG_SYS_FPGA_BASE;
 	unsigned char switch_status;
 	unsigned long cs0_base;
 	unsigned long cs0_size;
@@ -315,7 +315,7 @@ int pci_pre_init(struct pci_controller * hose )
  *	may not be sufficient for a given board.
  *
  ************************************************************************/
-#if defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT)
+#if defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT)
 void pci_target_init(struct pci_controller * hose )
 {
 	/*--------------------------------------------------------------------------+
@@ -330,7 +330,7 @@ void pci_target_init(struct pci_controller * hose )
 	 * Map all of SDRAM to PCI address 0x0000_0000. Note that the 440 strapping
 	 * options to not support sizes such as 128/256 MB.
 	 *--------------------------------------------------------------------------*/
-	out32r( PCIX0_PIM0LAL, CFG_SDRAM_BASE );
+	out32r( PCIX0_PIM0LAL, CONFIG_SYS_SDRAM_BASE );
 	out32r( PCIX0_PIM0LAH, 0 );
 	out32r( PCIX0_PIM0SA, ~(gd->ram_size - 1) | 1 );
 
@@ -339,12 +339,12 @@ void pci_target_init(struct pci_controller * hose )
 	/*--------------------------------------------------------------------------+
 	 * Program the board's subsystem id/vendor id
 	 *--------------------------------------------------------------------------*/
-	out16r( PCIX0_SBSYSVID, CFG_PCI_SUBSYS_VENDORID );
-	out16r( PCIX0_SBSYSID, CFG_PCI_SUBSYS_DEVICEID );
+	out16r( PCIX0_SBSYSVID, CONFIG_SYS_PCI_SUBSYS_VENDORID );
+	out16r( PCIX0_SBSYSID, CONFIG_SYS_PCI_SUBSYS_DEVICEID );
 
 	out16r( PCIX0_CMD, in16r(PCIX0_CMD) | PCI_COMMAND_MEMORY );
 }
-#endif /* defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT) */
+#endif /* defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT) */
 
 
 /*************************************************************************
diff --git a/board/amcc/ocotea/ocotea.h b/board/amcc/ocotea/ocotea.h
index 95ce1fd35..400852ab7 100644
--- a/board/amcc/ocotea/ocotea.h
+++ b/board/amcc/ocotea/ocotea.h
@@ -22,7 +22,7 @@
  */
 
 /* Board specific FPGA stuff ... */
-#define FPGA_REG0                       (CFG_FPGA_BASE + 0x00)
+#define FPGA_REG0                       (CONFIG_SYS_FPGA_BASE + 0x00)
 #define   FPGA_REG0_SSCG_MASK             0x80
 #define   FPGA_REG0_SSCG_DISABLE          0x00
 #define   FPGA_REG0_SSCG_ENABLE           0x80
@@ -48,7 +48,7 @@
 #define   FPGA_REG0_ONBOARD_FLASH_ENABLE  0x00
 #define   FPGA_REG0_ONBOARD_FLASH_DISABLE 0x02
 #define   FPGA_REG0_FLASH                 0x01
-#define FPGA_REG1                       (CFG_FPGA_BASE + 0x01)
+#define FPGA_REG1                       (CONFIG_SYS_FPGA_BASE + 0x01)
 #define   FPGA_REG1_9772_FSELFBX_MASK     0x80
 #define   FPGA_REG1_9772_FSELFBX_6        0x00
 #define   FPGA_REG1_9772_FSELFBX_10       0x80
@@ -71,7 +71,7 @@
 #define   FPGA_REG1_SOURCE_SSDIV1         0x05
 #define   FPGA_REG1_SOURCE_SSDIV2         0x06
 #define   FPGA_REG1_SOURCE_SSDIV4         0x07
-#define FPGA_REG2                       (CFG_FPGA_BASE + 0x02)
+#define FPGA_REG2                       (CONFIG_SYS_FPGA_BASE + 0x02)
 #define   FPGA_REG2_TC0                   0x80
 #define   FPGA_REG2_TC1                   0x40
 #define   FPGA_REG2_TC2                   0x20
@@ -82,7 +82,7 @@
 #define   FPGA_REG2_EXT_INTFACE_DISABLE   0x04
 #define   FPGA_REG2_SMII_RESET_DISABLE    0x02   /*Use on Ocotea pass 3 boards*/
 #define   FPGA_REG2_DEFAULT_UART1_N       0x01
-#define FPGA_REG3                       (CFG_FPGA_BASE + 0x03)
+#define FPGA_REG3                       (CONFIG_SYS_FPGA_BASE + 0x03)
 #define   FPGA_REG3_GIGABIT_RESET_DISABLE 0x80   /*Use on Ocotea pass 1 boards*/
 #define   FPGA_REG3_ENET_MASK1            0x70   /*Use on Ocotea pass 1 boards*/
 #define   FPGA_REG3_ENET_MASK2            0xF0   /*Use on Ocotea pass 2 boards*/
@@ -108,7 +108,7 @@
 #define   FPGA_REG3_STAT_LED4_DISAB       0x00
 #define   FPGA_REG3_STAT_LED2_DISAB       0x00
 #define   FPGA_REG3_STAT_LED1_DISAB       0x00
-#define FPGA_REG4                       (CFG_FPGA_BASE + 0x04)
+#define FPGA_REG4                       (CONFIG_SYS_FPGA_BASE + 0x04)
 #define   FPGA_REG4_GPHY_MODE10           0x80
 #define   FPGA_REG4_GPHY_MODE100          0x40
 #define   FPGA_REG4_GPHY_MODE1000         0x20
diff --git a/board/amcc/ocotea/u-boot.lds b/board/amcc/ocotea/u-boot.lds
index 298aba82d..8f6187313 100644
--- a/board/amcc/ocotea/u-boot.lds
+++ b/board/amcc/ocotea/u-boot.lds
@@ -137,6 +137,7 @@ SECTIONS
    *(.dynbss)
    *(.bss)
    *(COMMON)
+   . = ALIGN(4);
   }
   _end = . ;
   PROVIDE (end = .);
diff --git a/board/amcc/redwood/config.mk b/board/amcc/redwood/config.mk
index f33336d93..381f2b23d 100644
--- a/board/amcc/redwood/config.mk
+++ b/board/amcc/redwood/config.mk
@@ -38,5 +38,5 @@ PLATFORM_CPPFLAGS += -DDEBUG
 endif
 
 ifeq ($(dbcr),1)
-PLATFORM_CPPFLAGS += -DCFG_INIT_DBCR=0x8cff0000
+PLATFORM_CPPFLAGS += -DCONFIG_SYS_INIT_DBCR=0x8cff0000
 endif
diff --git a/board/amcc/redwood/init.S b/board/amcc/redwood/init.S
index fcffada30..363d7932a 100644
--- a/board/amcc/redwood/init.S
+++ b/board/amcc/redwood/init.S
@@ -54,24 +54,24 @@ tlbtab:
 	 */
 
 	/* Although 512 KB, map 256k at a time */
-	tlbentry(CFG_ISRAM_BASE, SZ_256K, 0x00000000, 4, AC_R|AC_W|AC_X|SA_I)
-	tlbentry(CFG_ISRAM_BASE + 0x40000, SZ_256K, 0x00040000, 4, AC_R|AC_W|AC_X|SA_I)
+	tlbentry(CONFIG_SYS_ISRAM_BASE, SZ_256K, 0x00000000, 4, AC_R|AC_W|AC_X|SA_I)
+	tlbentry(CONFIG_SYS_ISRAM_BASE + 0x40000, SZ_256K, 0x00040000, 4, AC_R|AC_W|AC_X|SA_I)
 
-	tlbentry(CFG_OPER_FLASH, SZ_16M, 0xE7000000, 4,AC_R|AC_W|AC_X|SA_G|SA_I)
+	tlbentry(CONFIG_SYS_OPER_FLASH, SZ_16M, 0xE7000000, 4,AC_R|AC_W|AC_X|SA_G|SA_I)
 
 	/*
 	 * Peripheral base
 	 */
-	tlbentry(CFG_PERIPHERAL_BASE, SZ_16K, 0xEF600000, 4, AC_R|AC_W|SA_G|SA_I)
+	tlbentry(CONFIG_SYS_PERIPHERAL_BASE, SZ_16K, 0xEF600000, 4, AC_R|AC_W|SA_G|SA_I)
 
-	tlbentry(CFG_PCIE0_XCFGBASE,SZ_16M, 0x00000000, 0xC, AC_R|AC_W|SA_G|SA_I)
-	tlbentry(CFG_PCIE1_XCFGBASE,SZ_16M, 0x10000000, 0xC, AC_R|AC_W|SA_G|SA_I)
-	tlbentry(CFG_PCIE2_XCFGBASE,SZ_16M, 0x20000000, 0xC, AC_R|AC_W|SA_G|SA_I)
+	tlbentry(CONFIG_SYS_PCIE0_XCFGBASE,SZ_16M, 0x00000000, 0xC, AC_R|AC_W|SA_G|SA_I)
+	tlbentry(CONFIG_SYS_PCIE1_XCFGBASE,SZ_16M, 0x10000000, 0xC, AC_R|AC_W|SA_G|SA_I)
+	tlbentry(CONFIG_SYS_PCIE2_XCFGBASE,SZ_16M, 0x20000000, 0xC, AC_R|AC_W|SA_G|SA_I)
 
-	tlbentry(CFG_PCIE0_MEMBASE, SZ_256M, 0x00000000, 0xD, AC_R|AC_W|SA_G|SA_I)
-	tlbentry(CFG_PCIE1_MEMBASE, SZ_256M, 0x00000000, 0xE, AC_R|AC_W|SA_G|SA_I)
+	tlbentry(CONFIG_SYS_PCIE0_MEMBASE, SZ_256M, 0x00000000, 0xD, AC_R|AC_W|SA_G|SA_I)
+	tlbentry(CONFIG_SYS_PCIE1_MEMBASE, SZ_256M, 0x00000000, 0xE, AC_R|AC_W|SA_G|SA_I)
 
-	tlbentry(CFG_PCIE0_REGBASE, SZ_64K, 0x30000000, 0xC, AC_R|AC_W|SA_G|SA_I)
-	tlbentry(CFG_PCIE1_REGBASE, SZ_64K, 0x30010000, 0xC, AC_R|AC_W|SA_G|SA_I)
-	tlbentry(CFG_PCIE2_REGBASE, SZ_64K, 0x30020000, 0xC, AC_R|AC_W|SA_G|SA_I)
+	tlbentry(CONFIG_SYS_PCIE0_REGBASE, SZ_64K, 0x30000000, 0xC, AC_R|AC_W|SA_G|SA_I)
+	tlbentry(CONFIG_SYS_PCIE1_REGBASE, SZ_64K, 0x30010000, 0xC, AC_R|AC_W|SA_G|SA_I)
+	tlbentry(CONFIG_SYS_PCIE2_REGBASE, SZ_64K, 0x30020000, 0xC, AC_R|AC_W|SA_G|SA_I)
 	tlbtab_end
diff --git a/board/amcc/redwood/u-boot.lds b/board/amcc/redwood/u-boot.lds
index 2104cc2a3..8362c9b8a 100644
--- a/board/amcc/redwood/u-boot.lds
+++ b/board/amcc/redwood/u-boot.lds
@@ -70,7 +70,7 @@ SECTIONS
     board/amcc/redwood/init.o	(.text)
 
 /*    . = env_offset;*/
-/*    common/environment.o(.text)*/
+/*    common/env_embedded.o(.text)*/
 
     *(.text)
     *(.fixup)
@@ -141,6 +141,7 @@ SECTIONS
    *(.dynbss)
    *(.bss)
    *(COMMON)
+   . = ALIGN(4);
   }
   _end = . ;
   PROVIDE (end = .);
diff --git a/board/amcc/sequoia/cmd_sequoia.c b/board/amcc/sequoia/cmd_sequoia.c
index 6b9043a05..3402f84a3 100644
--- a/board/amcc/sequoia/cmd_sequoia.c
+++ b/board/amcc/sequoia/cmd_sequoia.c
@@ -46,7 +46,7 @@
 #define NAND_COMPATIBLE	0x01
 #define NOR_COMPATIBLE  0x02
 
-/* check with Stefan on CFG_I2C_EEPROM_ADDR */
+/* check with Stefan on CONFIG_SYS_I2C_EEPROM_ADDR */
 #define I2C_EEPROM_ADDR 0x52
 
 static char *config_labels[] = {
@@ -207,7 +207,7 @@ static int do_bootstrap(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 	}
 
 	/* check CPLD register +5 for PCI 66MHz flag */
-	if ((in_8((void *)(CFG_BCSR_BASE + 5)) & CFG_BCSR5_PCI66EN) == 0)
+	if ((in_8((void *)(CONFIG_SYS_BCSR_BASE + 5)) & CONFIG_SYS_BCSR5_PCI66EN) == 0)
 		/*
 		 * PLB-to-PCI divisor = 3 for 33MHz sync PCI
 		 * instead of 2 for 66MHz systems
@@ -216,7 +216,7 @@ static int do_bootstrap(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 
 	if (i2c_write(I2C_EEPROM_ADDR, 0, 1, buf, 16) != 0)
 		printf("Error writing to EEPROM at address 0x%x\n", I2C_EEPROM_ADDR);
-	udelay(CFG_EEPROM_PAGE_WRITE_DELAY_MS * 1000);
+	udelay(CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS * 1000);
 
 	printf("Done\n");
 	printf("Please power-cycle the board for the changes to take effect\n");
diff --git a/board/amcc/sequoia/config.mk b/board/amcc/sequoia/config.mk
index 5e04ee4e3..6c748c914 100644
--- a/board/amcc/sequoia/config.mk
+++ b/board/amcc/sequoia/config.mk
@@ -41,5 +41,5 @@ PLATFORM_CPPFLAGS += -DDEBUG
 endif
 
 ifeq ($(dbcr),1)
-PLATFORM_CPPFLAGS += -DCFG_INIT_DBCR=0x8cff0000
+PLATFORM_CPPFLAGS += -DCONFIG_SYS_INIT_DBCR=0x8cff0000
 endif
diff --git a/board/amcc/sequoia/init.S b/board/amcc/sequoia/init.S
index 46a37c6a2..bd346bf04 100644
--- a/board/amcc/sequoia/init.S
+++ b/board/amcc/sequoia/init.S
@@ -45,36 +45,36 @@ tlbtab:
 
 	/* TLB-entry for DDR SDRAM (Up to 2GB) */
 #ifdef CONFIG_4xx_DCACHE
-	tlbentry( CFG_SDRAM_BASE, SZ_256M, CFG_SDRAM_BASE, 0, AC_R|AC_W|AC_X|SA_G)
+	tlbentry( CONFIG_SYS_SDRAM_BASE, SZ_256M, CONFIG_SYS_SDRAM_BASE, 0, AC_R|AC_W|AC_X|SA_G)
 #else
-	tlbentry( CFG_SDRAM_BASE, SZ_256M, CFG_SDRAM_BASE, 0, AC_R|AC_W|AC_X|SA_G|SA_I )
+	tlbentry( CONFIG_SYS_SDRAM_BASE, SZ_256M, CONFIG_SYS_SDRAM_BASE, 0, AC_R|AC_W|AC_X|SA_G|SA_I )
 #endif
 
 	/* TLB-entry for EBC */
-	tlbentry( CFG_BCSR_BASE, SZ_256M, CFG_BCSR_BASE, 1, AC_R|AC_W|AC_X|SA_G|SA_I )
+	tlbentry( CONFIG_SYS_BCSR_BASE, SZ_256M, CONFIG_SYS_BCSR_BASE, 1, AC_R|AC_W|AC_X|SA_G|SA_I )
 
 	/* BOOT_CS (FLASH) must be forth. Before relocation SA_I can be off to use the
 	 * speed up boot process. It is patched after relocation to enable SA_I
 	 */
 #ifndef CONFIG_NAND_SPL
-	tlbentry( CFG_BOOT_BASE_ADDR, SZ_256M, CFG_BOOT_BASE_ADDR, 1, AC_R|AC_W|AC_X|SA_G )
+	tlbentry( CONFIG_SYS_BOOT_BASE_ADDR, SZ_256M, CONFIG_SYS_BOOT_BASE_ADDR, 1, AC_R|AC_W|AC_X|SA_G )
 #else
-	tlbentry( CFG_NAND_BOOT_SPL_SRC, SZ_4K, CFG_NAND_BOOT_SPL_SRC, 1, AC_R|AC_W|AC_X|SA_G )
+	tlbentry( CONFIG_SYS_NAND_BOOT_SPL_SRC, SZ_4K, CONFIG_SYS_NAND_BOOT_SPL_SRC, 1, AC_R|AC_W|AC_X|SA_G )
 #endif
 
-#ifdef CFG_INIT_RAM_DCACHE
+#ifdef CONFIG_SYS_INIT_RAM_DCACHE
 	/* TLB-entry for init-ram in dcache (SA_I must be turned off!) */
-	tlbentry( CFG_INIT_RAM_ADDR, SZ_64K, CFG_INIT_RAM_ADDR, 0, AC_R|AC_W|AC_X|SA_G )
+	tlbentry( CONFIG_SYS_INIT_RAM_ADDR, SZ_64K, CONFIG_SYS_INIT_RAM_ADDR, 0, AC_R|AC_W|AC_X|SA_G )
 #endif
 
 	/* TLB-entry for PCI Memory */
-	tlbentry( CFG_PCI_MEMBASE, SZ_256M, CFG_PCI_MEMBASE, 1, AC_R|AC_W|SA_G|SA_I )
-	tlbentry( CFG_PCI_MEMBASE1, SZ_256M, CFG_PCI_MEMBASE1, 1, AC_R|AC_W|SA_G|SA_I )
-	tlbentry( CFG_PCI_MEMBASE2, SZ_256M, CFG_PCI_MEMBASE2, 1, AC_R|AC_W|SA_G|SA_I )
-	tlbentry( CFG_PCI_MEMBASE3, SZ_256M, CFG_PCI_MEMBASE3, 1, AC_R|AC_W|SA_G|SA_I )
+	tlbentry( CONFIG_SYS_PCI_MEMBASE, SZ_256M, CONFIG_SYS_PCI_MEMBASE, 1, AC_R|AC_W|SA_G|SA_I )
+	tlbentry( CONFIG_SYS_PCI_MEMBASE1, SZ_256M, CONFIG_SYS_PCI_MEMBASE1, 1, AC_R|AC_W|SA_G|SA_I )
+	tlbentry( CONFIG_SYS_PCI_MEMBASE2, SZ_256M, CONFIG_SYS_PCI_MEMBASE2, 1, AC_R|AC_W|SA_G|SA_I )
+	tlbentry( CONFIG_SYS_PCI_MEMBASE3, SZ_256M, CONFIG_SYS_PCI_MEMBASE3, 1, AC_R|AC_W|SA_G|SA_I )
 
 	/* TLB-entry for NAND */
-	tlbentry( CFG_NAND_ADDR, SZ_1K, CFG_NAND_ADDR, 1, AC_R|AC_W|AC_X|SA_G|SA_I )
+	tlbentry( CONFIG_SYS_NAND_ADDR, SZ_1K, CONFIG_SYS_NAND_ADDR, 1, AC_R|AC_W|AC_X|SA_G|SA_I )
 
 	/* TLB-entry for Internal Registers & OCM */
 	tlbentry( 0xe0000000, SZ_16M, 0xe0000000, 0,  AC_R|AC_W|AC_X|SA_I )
@@ -95,8 +95,8 @@ tlbtab:
 	 * For NAND booting the first TLB has to be reconfigured to full size
 	 * and with caching disabled after running from RAM!
 	 */
-#define TLB00	TLB0(CFG_BOOT_BASE_ADDR, SZ_256M)
-#define TLB01	TLB1(CFG_BOOT_BASE_ADDR, 1)
+#define TLB00	TLB0(CONFIG_SYS_BOOT_BASE_ADDR, SZ_256M)
+#define TLB01	TLB1(CONFIG_SYS_BOOT_BASE_ADDR, 1)
 #define TLB02	TLB2(AC_R|AC_W|AC_X|SA_G|SA_I)
 
 	.globl	reconfig_tlb0
diff --git a/board/amcc/sequoia/sdram.c b/board/amcc/sequoia/sdram.c
index 77e6c7b4d..64eb06308 100644
--- a/board/amcc/sequoia/sdram.c
+++ b/board/amcc/sequoia/sdram.c
@@ -113,5 +113,5 @@ phys_size_t initdram (int board_type)
 	 */
 	set_mcsr(get_mcsr());
 
-	return (CFG_MBYTES_SDRAM << 20);
+	return (CONFIG_SYS_MBYTES_SDRAM << 20);
 }
diff --git a/board/amcc/sequoia/sequoia.c b/board/amcc/sequoia/sequoia.c
index 176d5cf0d..d6668e29b 100644
--- a/board/amcc/sequoia/sequoia.c
+++ b/board/amcc/sequoia/sequoia.c
@@ -33,7 +33,7 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
-extern flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
+extern flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */
 
 ulong flash_get_size (ulong base, int banknum);
 
@@ -74,16 +74,16 @@ int board_early_init_f(void)
 	mtdcr(uic2sr, 0xffffffff);	/* clear all */
 
 	/* 50MHz tmrclk */
-	out_8((u8 *) CFG_BCSR_BASE + 0x04, 0x00);
+	out_8((u8 *) CONFIG_SYS_BCSR_BASE + 0x04, 0x00);
 
 	/* clear write protects */
-	out_8((u8 *) CFG_BCSR_BASE + 0x07, 0x00);
+	out_8((u8 *) CONFIG_SYS_BCSR_BASE + 0x07, 0x00);
 
 	/* enable Ethernet */
-	out_8((u8 *) CFG_BCSR_BASE + 0x08, 0x00);
+	out_8((u8 *) CONFIG_SYS_BCSR_BASE + 0x08, 0x00);
 
 	/* enable USB device */
-	out_8((u8 *) CFG_BCSR_BASE + 0x09, 0x20);
+	out_8((u8 *) CONFIG_SYS_BCSR_BASE + 0x09, 0x20);
 
 	/* select Ethernet (and optionally IIC1) pins */
 	mfsdr(SDR0_PFC1, sdr0_pfc1);
@@ -113,7 +113,7 @@ int board_early_init_f(void)
 		SDR0_CUST0_NDFC_ENABLE		|
 		SDR0_CUST0_NDFC_BW_8_BIT	|
 		SDR0_CUST0_NDFC_ARE_MASK	|
-		(0x80000000 >> (28 + CFG_NAND_CS));
+		(0x80000000 >> (28 + CONFIG_SYS_NAND_CS));
 	mtsdr(SDR0_CUST0, sdr0_cust0);
 
 	return 0;
@@ -157,17 +157,17 @@ int misc_init_r(void)
 	 */
 	flash_get_size(gd->bd->bi_flashstart, 0);
 
-#ifdef CFG_ENV_IS_IN_FLASH
+#ifdef CONFIG_ENV_IS_IN_FLASH
 	/* Monitor protection ON by default */
 	(void)flash_protect(FLAG_PROTECT_SET,
-			    -CFG_MONITOR_LEN,
+			    -CONFIG_SYS_MONITOR_LEN,
 			    0xffffffff,
 			    &flash_info[0]);
 
 	/* Env protection ON by default */
 	(void)flash_protect(FLAG_PROTECT_SET,
-			    CFG_ENV_ADDR_REDUND,
-			    CFG_ENV_ADDR_REDUND + 2*CFG_ENV_SECT_SIZE - 1,
+			    CONFIG_ENV_ADDR_REDUND,
+			    CONFIG_ENV_ADDR_REDUND + 2*CONFIG_ENV_SECT_SIZE - 1,
 			    &flash_info[0]);
 #endif
 
@@ -320,8 +320,8 @@ int checkboard(void)
 	printf("Board: Rainier - AMCC PPC440GRx Evaluation Board");
 #endif
 
-	rev = in_8((void *)(CFG_BCSR_BASE + 0));
-	val = in_8((void *)(CFG_BCSR_BASE + 5)) & CFG_BCSR5_PCI66EN;
+	rev = in_8((void *)(CONFIG_SYS_BCSR_BASE + 0));
+	val = in_8((void *)(CONFIG_SYS_BCSR_BASE + 5)) & CONFIG_SYS_BCSR5_PCI66EN;
 	printf(", Rev. %X, PCI=%d MHz", rev, val ? 66 : 33);
 
 	if (s != NULL) {
@@ -407,7 +407,7 @@ int pci_pre_init(struct pci_controller *hose)
  * inbound map (PIM). But the bootstrap config choices are limited and
  * may not be sufficient for a given board.
  */
-#if defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT)
+#if defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT)
 void pci_target_init(struct pci_controller *hose)
 {
 	/*
@@ -423,16 +423,16 @@ void pci_target_init(struct pci_controller *hose)
 	 */
 	out32r(PCIX0_PMM0MA, 0x00000000);	/* PMM0 Mask/Attribute */
 						/* - disabled b4 setting */
-	out32r(PCIX0_PMM0LA, CFG_PCI_MEMBASE);	/* PMM0 Local Address */
-	out32r(PCIX0_PMM0PCILA, CFG_PCI_MEMBASE); /* PMM0 PCI Low Address */
+	out32r(PCIX0_PMM0LA, CONFIG_SYS_PCI_MEMBASE);	/* PMM0 Local Address */
+	out32r(PCIX0_PMM0PCILA, CONFIG_SYS_PCI_MEMBASE); /* PMM0 PCI Low Address */
 	out32r(PCIX0_PMM0PCIHA, 0x00000000);	/* PMM0 PCI High Address */
 	out32r(PCIX0_PMM0MA, 0xE0000001);	/* 512M + No prefetching, */
 						/* and enable region */
 
 	out32r(PCIX0_PMM1MA, 0x00000000);	/* PMM0 Mask/Attribute */
 						/* - disabled b4 setting */
-	out32r(PCIX0_PMM1LA, CFG_PCI_MEMBASE2); /* PMM0 Local Address */
-	out32r(PCIX0_PMM1PCILA, CFG_PCI_MEMBASE2); /* PMM0 PCI Low Address */
+	out32r(PCIX0_PMM1LA, CONFIG_SYS_PCI_MEMBASE2); /* PMM0 Local Address */
+	out32r(PCIX0_PMM1PCILA, CONFIG_SYS_PCI_MEMBASE2); /* PMM0 PCI Low Address */
 	out32r(PCIX0_PMM1PCIHA, 0x00000000);	/* PMM0 PCI High Address */
 	out32r(PCIX0_PMM1MA, 0xE0000001);	/* 512M + No prefetching, */
 						/* and enable region */
@@ -448,8 +448,8 @@ void pci_target_init(struct pci_controller *hose)
 
 	/* Program the board's subsystem id/vendor id */
 	pci_write_config_word(0, PCI_SUBSYSTEM_VENDOR_ID,
-			      CFG_PCI_SUBSYS_VENDORID);
-	pci_write_config_word(0, PCI_SUBSYSTEM_ID, CFG_PCI_SUBSYS_ID);
+			      CONFIG_SYS_PCI_SUBSYS_VENDORID);
+	pci_write_config_word(0, PCI_SUBSYSTEM_ID, CONFIG_SYS_PCI_SUBSYS_ID);
 
 	/* Configure command register as bus master */
 	pci_write_config_word(0, PCI_COMMAND, PCI_COMMAND_MASTER);
@@ -463,9 +463,9 @@ void pci_target_init(struct pci_controller *hose)
 	pci_write_config_dword(0, PCI_BRDGOPT2, 0x00000101);
 
 }
-#endif /* defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT) */
+#endif /* defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT) */
 
-#if defined(CONFIG_PCI) && defined(CFG_PCI_MASTER_INIT)
+#if defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_MASTER_INIT)
 void pci_master_init(struct pci_controller *hose)
 {
 	unsigned short temp_short;
@@ -480,7 +480,7 @@ void pci_master_init(struct pci_controller *hose)
 			      temp_short | PCI_COMMAND_MASTER |
 			      PCI_COMMAND_MEMORY);
 }
-#endif /* defined(CONFIG_PCI) && defined(CFG_PCI_MASTER_INIT) */
+#endif /* defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_MASTER_INIT) */
 
 /*
  * is_pci_host
diff --git a/board/amcc/sequoia/u-boot-nand.lds b/board/amcc/sequoia/u-boot-nand.lds
index ae2e18de4..6e1e16997 100644
--- a/board/amcc/sequoia/u-boot-nand.lds
+++ b/board/amcc/sequoia/u-boot-nand.lds
@@ -57,7 +57,7 @@ SECTIONS
 
     /* Align to next NAND block */
     . = ALIGN(0x4000);
-    common/environment.o  (.ppcenv)
+    common/env_embedded.o  (.ppcenv)
     /* Keep some space here for redundant env and potential bad env blocks */
     . = ALIGN(0x10000);
 
@@ -129,6 +129,7 @@ SECTIONS
    *(.dynbss)
    *(.bss)
    *(COMMON)
+   . = ALIGN(4);
   }
 
   _end = . ;
diff --git a/board/amcc/sequoia/u-boot.lds b/board/amcc/sequoia/u-boot.lds
index b20fb1c0a..05152b7f7 100644
--- a/board/amcc/sequoia/u-boot.lds
+++ b/board/amcc/sequoia/u-boot.lds
@@ -135,9 +135,10 @@ SECTIONS
    *(.dynbss)
    *(.bss)
    *(COMMON)
+   . = ALIGN(4);
   }
 
-  ppcenv_assert = ASSERT(. < 0xFFFF8000, ".bss section too big, overlaps .ppcenv section. Please update your confguration: CFG_MONITOR_BASE, CFG_MONITOR_LEN and TEXT_BASE may need to be modified.");
+  ppcenv_assert = ASSERT(. < 0xFFFF8000, ".bss section too big, overlaps .ppcenv section. Please update your confguration: CONFIG_SYS_MONITOR_BASE, CONFIG_SYS_MONITOR_LEN and TEXT_BASE may need to be modified.");
 
   _end = . ;
   PROVIDE (end = .);
diff --git a/board/amcc/taihu/flash.c b/board/amcc/taihu/flash.c
index 290259e73..110cbe5e9 100644
--- a/board/amcc/taihu/flash.c
+++ b/board/amcc/taihu/flash.c
@@ -32,7 +32,7 @@
 #include <ppc4xx.h>
 #include <asm/processor.h>
 
-flash_info_t flash_info[CFG_MAX_FLASH_BANKS];	/* info for FLASH chips        */
+flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];	/* info for FLASH chips        */
 
 #undef DEBUG
 #ifdef DEBUG
@@ -41,9 +41,9 @@ flash_info_t flash_info[CFG_MAX_FLASH_BANKS];	/* info for FLASH chips        */
 #define DEBUGF(x...)
 #endif				/* DEBUG */
 
-#define CFG_FLASH_CHAR_SIZE unsigned char
-#define CFG_FLASH_CHAR_ADDR0 (0x0aaa)
-#define CFG_FLASH_CHAR_ADDR1 (0x0555)
+#define CONFIG_SYS_FLASH_CHAR_SIZE unsigned char
+#define CONFIG_SYS_FLASH_CHAR_ADDR0 (0x0aaa)
+#define CONFIG_SYS_FLASH_CHAR_ADDR1 (0x0555)
 /*-----------------------------------------------------------------------
  * Functions
  */
@@ -65,7 +65,7 @@ unsigned long flash_init(void)
 	int i;
 
 	/* Init: no FLASHes known */
-	for (i = 0; i < CFG_MAX_FLASH_BANKS; ++i) {
+	for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
 		flash_info[i].flash_id = FLASH_UNKNOWN;
 	}
 
@@ -84,15 +84,15 @@ unsigned long flash_init(void)
 		flash_get_offsets(FLASH_BASE0_PRELIM, &flash_info[0]);
 		/* Monitor protection ON by default */
 		(void)flash_protect(FLAG_PROTECT_SET,
-				    CFG_MONITOR_BASE,
-				    CFG_MONITOR_BASE + CFG_MONITOR_LEN - 1,
+				    CONFIG_SYS_MONITOR_BASE,
+				    CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN - 1,
 				    &flash_info[0]);
-#ifdef CFG_ENV_IS_IN_FLASH
-		(void)flash_protect(FLAG_PROTECT_SET, CFG_ENV_ADDR,
-				    CFG_ENV_ADDR + CFG_ENV_SECT_SIZE - 1,
+#ifdef CONFIG_ENV_IS_IN_FLASH
+		(void)flash_protect(FLAG_PROTECT_SET, CONFIG_ENV_ADDR,
+				    CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE - 1,
 				    &flash_info[0]);
-		(void)flash_protect(FLAG_PROTECT_SET, CFG_ENV_ADDR_REDUND,
-				    CFG_ENV_ADDR_REDUND + CFG_ENV_SECT_SIZE - 1,
+		(void)flash_protect(FLAG_PROTECT_SET, CONFIG_ENV_ADDR_REDUND,
+				    CONFIG_ENV_ADDR_REDUND + CONFIG_ENV_SECT_SIZE - 1,
 				    &flash_info[0]);
 #endif
 		/* Also protect sector containing initial power-up instruction */
@@ -299,32 +299,32 @@ static ulong flash_get_size(vu_long * addr, flash_info_t * info)
 #endif
 {
 	short i;
-	CFG_FLASH_WORD_SIZE value;
+	CONFIG_SYS_FLASH_WORD_SIZE value;
 	ulong base = (ulong) addr;
-	volatile CFG_FLASH_WORD_SIZE *addr2 = (CFG_FLASH_WORD_SIZE *) addr;
+	volatile CONFIG_SYS_FLASH_WORD_SIZE *addr2 = (CONFIG_SYS_FLASH_WORD_SIZE *) addr;
 
 	DEBUGF("FLASH ADDR: %08x\n", (unsigned)addr);
 
 	/* Write auto select command: read Manufacturer ID */
-	addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00AA00AA;
-	addr2[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x00550055;
-	addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00900090;
+	addr2[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00AA00AA;
+	addr2[CONFIG_SYS_FLASH_ADDR1] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00550055;
+	addr2[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00900090;
 	udelay(1000);
 
 	value = addr2[0];
 	DEBUGF("FLASH MANUFACT: %x\n", value);
 
 	switch (value) {
-	case (CFG_FLASH_WORD_SIZE) AMD_MANUFACT:
+	case (CONFIG_SYS_FLASH_WORD_SIZE) AMD_MANUFACT:
 		info->flash_id = FLASH_MAN_AMD;
 		break;
-	case (CFG_FLASH_WORD_SIZE) FUJ_MANUFACT:
+	case (CONFIG_SYS_FLASH_WORD_SIZE) FUJ_MANUFACT:
 		info->flash_id = FLASH_MAN_FUJ;
 		break;
-	case (CFG_FLASH_WORD_SIZE) SST_MANUFACT:
+	case (CONFIG_SYS_FLASH_WORD_SIZE) SST_MANUFACT:
 		info->flash_id = FLASH_MAN_SST;
 		break;
-	case (CFG_FLASH_WORD_SIZE) STM_MANUFACT:
+	case (CONFIG_SYS_FLASH_WORD_SIZE) STM_MANUFACT:
 		info->flash_id = FLASH_MAN_STM;
 		break;
 	default:
@@ -338,67 +338,67 @@ static ulong flash_get_size(vu_long * addr, flash_info_t * info)
 	DEBUGF("\nFLASH DEVICEID: %x\n", value);
 
 	switch (value) {
-	case (CFG_FLASH_WORD_SIZE) AMD_ID_LV040B:
+	case (CONFIG_SYS_FLASH_WORD_SIZE) AMD_ID_LV040B:
 		info->flash_id += FLASH_AM040;
 		info->sector_count = 8;
 		info->size = 0x0080000;	/* => 512 ko */
 		break;
 
-	case (CFG_FLASH_WORD_SIZE) AMD_ID_F040B:
+	case (CONFIG_SYS_FLASH_WORD_SIZE) AMD_ID_F040B:
 		info->flash_id += FLASH_AM040;
 		info->sector_count = 8;
 		info->size = 0x0080000;	/* => 512 ko */
 		break;
 
-	case (CFG_FLASH_WORD_SIZE) STM_ID_M29W040B:
+	case (CONFIG_SYS_FLASH_WORD_SIZE) STM_ID_M29W040B:
 		info->flash_id += FLASH_AM040;
 		info->sector_count = 8;
 		info->size = 0x0080000;	/* => 512 ko */
 		break;
 
-	case (CFG_FLASH_WORD_SIZE) AMD_ID_F016D:
+	case (CONFIG_SYS_FLASH_WORD_SIZE) AMD_ID_F016D:
 		info->flash_id += FLASH_AMD016;
 		info->sector_count = 32;
 		info->size = 0x00200000;
 		break;		/* => 2 MB              */
 
-	case (CFG_FLASH_WORD_SIZE) AMD_ID_LV033C:
+	case (CONFIG_SYS_FLASH_WORD_SIZE) AMD_ID_LV033C:
 		info->flash_id += FLASH_AMDLV033C;
 		info->sector_count = 64;
 		info->size = 0x00400000;
 		break;		/* => 4 MB              */
 
-	case (CFG_FLASH_WORD_SIZE) AMD_ID_LV400T:
+	case (CONFIG_SYS_FLASH_WORD_SIZE) AMD_ID_LV400T:
 		info->flash_id += FLASH_AM400T;
 		info->sector_count = 11;
 		info->size = 0x00080000;
 		break;		/* => 0.5 MB            */
 
-	case (CFG_FLASH_WORD_SIZE) AMD_ID_LV400B:
+	case (CONFIG_SYS_FLASH_WORD_SIZE) AMD_ID_LV400B:
 		info->flash_id += FLASH_AM400B;
 		info->sector_count = 11;
 		info->size = 0x00080000;
 		break;		/* => 0.5 MB            */
 
-	case (CFG_FLASH_WORD_SIZE) AMD_ID_LV800T:
+	case (CONFIG_SYS_FLASH_WORD_SIZE) AMD_ID_LV800T:
 		info->flash_id += FLASH_AM800T;
 		info->sector_count = 19;
 		info->size = 0x00100000;
 		break;		/* => 1 MB              */
 
-	case (CFG_FLASH_WORD_SIZE) AMD_ID_LV800B:
+	case (CONFIG_SYS_FLASH_WORD_SIZE) AMD_ID_LV800B:
 		info->flash_id += FLASH_AM800B;
 		info->sector_count = 19;
 		info->size = 0x00100000;
 		break;		/* => 1 MB              */
 
-	case (CFG_FLASH_WORD_SIZE) AMD_ID_LV160T:
+	case (CONFIG_SYS_FLASH_WORD_SIZE) AMD_ID_LV160T:
 		info->flash_id += FLASH_AM160T;
 		info->sector_count = 35;
 		info->size = 0x00200000;
 		break;		/* => 2 MB              */
 
-	case (CFG_FLASH_WORD_SIZE) AMD_ID_LV160B:
+	case (CONFIG_SYS_FLASH_WORD_SIZE) AMD_ID_LV160B:
 		info->flash_id += FLASH_AM160B;
 		info->sector_count = 35;
 		info->size = 0x00200000;
@@ -445,14 +445,14 @@ static ulong flash_get_size(vu_long * addr, flash_info_t * info)
 	for (i = 0; i < info->sector_count; i++) {
 		/* read sector protection at sector address, (A7 .. A0) = 0x02 */
 		/* D0 = 1 if protected */
-		addr2 = (volatile CFG_FLASH_WORD_SIZE *)(info->start[i]);
+		addr2 = (volatile CONFIG_SYS_FLASH_WORD_SIZE *)(info->start[i]);
 
 		/* For AMD29033C flash we need to resend the command of *
 		 * reading flash protection for upper 8 Mb of flash     */
 		if (i == 32) {
-			addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0xAAAAAAAA;
-			addr2[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x55555555;
-			addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x90909090;
+			addr2[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0xAAAAAAAA;
+			addr2[CONFIG_SYS_FLASH_ADDR1] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x55555555;
+			addr2[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x90909090;
 		}
 
 		if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST)
@@ -462,7 +462,7 @@ static ulong flash_get_size(vu_long * addr, flash_info_t * info)
 	}
 
 	/* issue bank reset to return to read mode */
-	addr2[0] = (CFG_FLASH_WORD_SIZE) 0x00F000F0;
+	addr2[0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00F000F0;
 
 	return info->size;
 }
@@ -470,14 +470,14 @@ static ulong flash_get_size(vu_long * addr, flash_info_t * info)
 static int wait_for_DQ7_1(flash_info_t * info, int sect)
 {
 	ulong start, now, last;
-	volatile CFG_FLASH_WORD_SIZE *addr =
-	    (CFG_FLASH_WORD_SIZE *) (info->start[sect]);
+	volatile CONFIG_SYS_FLASH_WORD_SIZE *addr =
+	    (CONFIG_SYS_FLASH_WORD_SIZE *) (info->start[sect]);
 
 	start = get_timer(0);
 	last = start;
-	while ((addr[0] & (CFG_FLASH_WORD_SIZE) 0x00800080) !=
-	       (CFG_FLASH_WORD_SIZE) 0x00800080) {
-		if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+	while ((addr[0] & (CONFIG_SYS_FLASH_WORD_SIZE) 0x00800080) !=
+	       (CONFIG_SYS_FLASH_WORD_SIZE) 0x00800080) {
+		if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
 			printf("Timeout\n");
 			return -1;
 		}
@@ -509,8 +509,8 @@ static int flash_erase_1(flash_info_t * info, int s_first, int s_last)
 int flash_erase(flash_info_t * info, int s_first, int s_last)
 #endif
 {
-	volatile CFG_FLASH_WORD_SIZE *addr = (CFG_FLASH_WORD_SIZE *) (info->start[0]);
-	volatile CFG_FLASH_WORD_SIZE *addr2;
+	volatile CONFIG_SYS_FLASH_WORD_SIZE *addr = (CONFIG_SYS_FLASH_WORD_SIZE *) (info->start[0]);
+	volatile CONFIG_SYS_FLASH_WORD_SIZE *addr2;
 	int flag, prot, sect, l_sect;
 	int i;
 
@@ -550,24 +550,24 @@ int flash_erase(flash_info_t * info, int s_first, int s_last)
 	/* Start erase on unprotected sectors */
 	for (sect = s_first; sect <= s_last; sect++) {
 		if (info->protect[sect] == 0) {	/* not protected */
-			addr2 = (CFG_FLASH_WORD_SIZE *) (info->start[sect]);
+			addr2 = (CONFIG_SYS_FLASH_WORD_SIZE *) (info->start[sect]);
 
 			if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) {
-				addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00AA00AA;
-				addr[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x00550055;
-				addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00800080;
-				addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00AA00AA;
-				addr[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x00550055;
-				addr2[0] = (CFG_FLASH_WORD_SIZE) 0x00500050;	/* block erase */
+				addr[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00AA00AA;
+				addr[CONFIG_SYS_FLASH_ADDR1] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00550055;
+				addr[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00800080;
+				addr[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00AA00AA;
+				addr[CONFIG_SYS_FLASH_ADDR1] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00550055;
+				addr2[0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00500050;	/* block erase */
 				for (i = 0; i < 50; i++)
 					udelay(1000);	/* wait 1 ms */
 			} else {
-				addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00AA00AA;
-				addr[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x00550055;
-				addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00800080;
-				addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00AA00AA;
-				addr[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x00550055;
-				addr2[0] = (CFG_FLASH_WORD_SIZE) 0x00300030;	/* sector erase */
+				addr[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00AA00AA;
+				addr[CONFIG_SYS_FLASH_ADDR1] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00550055;
+				addr[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00800080;
+				addr[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00AA00AA;
+				addr[CONFIG_SYS_FLASH_ADDR1] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00550055;
+				addr2[0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00300030;	/* sector erase */
 			}
 			l_sect = sect;
 			/*
@@ -589,8 +589,8 @@ int flash_erase(flash_info_t * info, int s_first, int s_last)
 	udelay(1000);
 
 	/* reset to read mode */
-	addr = (CFG_FLASH_WORD_SIZE *) info->start[0];
-	addr[0] = (CFG_FLASH_WORD_SIZE) 0x00F000F0;	/* reset bank */
+	addr = (CONFIG_SYS_FLASH_WORD_SIZE *) info->start[0];
+	addr[0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00F000F0;	/* reset bank */
 
 	printf(" done\n");
 	return 0;
@@ -691,9 +691,9 @@ static int write_word_1(flash_info_t * info, ulong dest, ulong data)
 static int write_word(flash_info_t * info, ulong dest, ulong data)
 #endif
 {
-	volatile CFG_FLASH_WORD_SIZE *addr2 = (CFG_FLASH_WORD_SIZE *) (info->start[0]);
-	volatile CFG_FLASH_WORD_SIZE *dest2 = (CFG_FLASH_WORD_SIZE *) dest;
-	volatile CFG_FLASH_WORD_SIZE *data2 = (CFG_FLASH_WORD_SIZE *) & data;
+	volatile CONFIG_SYS_FLASH_WORD_SIZE *addr2 = (CONFIG_SYS_FLASH_WORD_SIZE *) (info->start[0]);
+	volatile CONFIG_SYS_FLASH_WORD_SIZE *dest2 = (CONFIG_SYS_FLASH_WORD_SIZE *) dest;
+	volatile CONFIG_SYS_FLASH_WORD_SIZE *data2 = (CONFIG_SYS_FLASH_WORD_SIZE *) & data;
 	ulong start;
 	int i;
 
@@ -702,15 +702,15 @@ static int write_word(flash_info_t * info, ulong dest, ulong data)
 		return 2;
 	}
 
-	for (i = 0; i < 4 / sizeof(CFG_FLASH_WORD_SIZE); i++) {
+	for (i = 0; i < 4 / sizeof(CONFIG_SYS_FLASH_WORD_SIZE); i++) {
 		int flag;
 
 		/* Disable interrupts which might cause a timeout here */
 		flag = disable_interrupts();
 
-		addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00AA00AA;
-		addr2[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x00550055;
-		addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00A000A0;
+		addr2[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00AA00AA;
+		addr2[CONFIG_SYS_FLASH_ADDR1] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00550055;
+		addr2[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00A000A0;
 
 		dest2[i] = data2[i];
 
@@ -720,10 +720,10 @@ static int write_word(flash_info_t * info, ulong dest, ulong data)
 
 		/* data polling for D7 */
 		start = get_timer(0);
-		while ((dest2[i] & (CFG_FLASH_WORD_SIZE) 0x00800080) !=
-		       (data2[i] & (CFG_FLASH_WORD_SIZE) 0x00800080)) {
+		while ((dest2[i] & (CONFIG_SYS_FLASH_WORD_SIZE) 0x00800080) !=
+		       (data2[i] & (CONFIG_SYS_FLASH_WORD_SIZE) 0x00800080)) {
 
-			if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+			if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
 				return 1;
 			}
 		}
@@ -740,32 +740,32 @@ static int write_word(flash_info_t * info, ulong dest, ulong data)
 static ulong flash_get_size_2(vu_long * addr, flash_info_t * info)
 {
 	short i;
-	CFG_FLASH_CHAR_SIZE value;
+	CONFIG_SYS_FLASH_CHAR_SIZE value;
 	ulong base = (ulong) addr;
-	volatile CFG_FLASH_WORD_SIZE *addr2 = (CFG_FLASH_WORD_SIZE *) addr;
+	volatile CONFIG_SYS_FLASH_WORD_SIZE *addr2 = (CONFIG_SYS_FLASH_WORD_SIZE *) addr;
 
 	DEBUGF("FLASH ADDR: %08x\n", (unsigned)addr);
 
 	/* Write auto select command: read Manufacturer ID */
-	addr2[CFG_FLASH_CHAR_ADDR0] = (CFG_FLASH_WORD_SIZE) 0xAAAAAAAA;
-	addr2[CFG_FLASH_CHAR_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x55555555;
-	addr2[CFG_FLASH_CHAR_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x90909090;
+	addr2[CONFIG_SYS_FLASH_CHAR_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0xAAAAAAAA;
+	addr2[CONFIG_SYS_FLASH_CHAR_ADDR1] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x55555555;
+	addr2[CONFIG_SYS_FLASH_CHAR_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x90909090;
 	udelay(1000);
 
-	value = (CFG_FLASH_CHAR_SIZE)addr2[0];
+	value = (CONFIG_SYS_FLASH_CHAR_SIZE)addr2[0];
 	DEBUGF("FLASH MANUFACT: %x\n", value);
 
 	switch (value) {
-	case (CFG_FLASH_CHAR_SIZE) AMD_MANUFACT:
+	case (CONFIG_SYS_FLASH_CHAR_SIZE) AMD_MANUFACT:
 		info->flash_id = FLASH_MAN_AMD;
 		break;
-	case (CFG_FLASH_CHAR_SIZE) FUJ_MANUFACT:
+	case (CONFIG_SYS_FLASH_CHAR_SIZE) FUJ_MANUFACT:
 		info->flash_id = FLASH_MAN_FUJ;
 		break;
-	case (CFG_FLASH_CHAR_SIZE) SST_MANUFACT:
+	case (CONFIG_SYS_FLASH_CHAR_SIZE) SST_MANUFACT:
 		info->flash_id = FLASH_MAN_SST;
 		break;
-	case (CFG_FLASH_CHAR_SIZE) STM_MANUFACT:
+	case (CONFIG_SYS_FLASH_CHAR_SIZE) STM_MANUFACT:
 		info->flash_id = FLASH_MAN_STM;
 		break;
 	default:
@@ -775,83 +775,83 @@ static ulong flash_get_size_2(vu_long * addr, flash_info_t * info)
 		return 0;		/* no or unknown flash */
 	}
 
-	value = (CFG_FLASH_CHAR_SIZE)addr2[2];	/* device ID */
+	value = (CONFIG_SYS_FLASH_CHAR_SIZE)addr2[2];	/* device ID */
 	DEBUGF("\nFLASH DEVICEID: %x\n", value);
 
 	switch (value) {
-	case (CFG_FLASH_CHAR_SIZE) AMD_ID_LV040B:
+	case (CONFIG_SYS_FLASH_CHAR_SIZE) AMD_ID_LV040B:
 		info->flash_id += FLASH_AM040;
 		info->sector_count = 8;
 		info->size = 0x0080000;	/* => 512 ko */
 		break;
 
-	case (CFG_FLASH_CHAR_SIZE) AMD_ID_F040B:
+	case (CONFIG_SYS_FLASH_CHAR_SIZE) AMD_ID_F040B:
 		info->flash_id += FLASH_AM040;
 		info->sector_count = 8;
 		info->size = 0x0080000;	/* => 512 ko */
 		break;
 
-	case (CFG_FLASH_CHAR_SIZE) STM_ID_M29W040B:
+	case (CONFIG_SYS_FLASH_CHAR_SIZE) STM_ID_M29W040B:
 		info->flash_id += FLASH_AM040;
 		info->sector_count = 8;
 		info->size = 0x0080000;	/* => 512 ko */
 		break;
 
-	case (CFG_FLASH_CHAR_SIZE) AMD_ID_F016D:
+	case (CONFIG_SYS_FLASH_CHAR_SIZE) AMD_ID_F016D:
 		info->flash_id += FLASH_AMD016;
 		info->sector_count = 32;
 		info->size = 0x00200000;
 		break;			/* => 2 MB */
 
-	case (CFG_FLASH_CHAR_SIZE) AMD_ID_LV033C:
+	case (CONFIG_SYS_FLASH_CHAR_SIZE) AMD_ID_LV033C:
 		info->flash_id += FLASH_AMDLV033C;
 		info->sector_count = 64;
 		info->size = 0x00400000;
 		break;			/* => 4 MB */
 
-	case (CFG_FLASH_CHAR_SIZE) AMD_ID_LV400T:
+	case (CONFIG_SYS_FLASH_CHAR_SIZE) AMD_ID_LV400T:
 		info->flash_id += FLASH_AM400T;
 		info->sector_count = 11;
 		info->size = 0x00080000;
 		break;			/* => 0.5 MB */
 
-	case (CFG_FLASH_CHAR_SIZE) AMD_ID_LV400B:
+	case (CONFIG_SYS_FLASH_CHAR_SIZE) AMD_ID_LV400B:
 		info->flash_id += FLASH_AM400B;
 		info->sector_count = 11;
 		info->size = 0x00080000;
 		break;			/* => 0.5 MB */
 
-	case (CFG_FLASH_CHAR_SIZE) AMD_ID_LV800T:
+	case (CONFIG_SYS_FLASH_CHAR_SIZE) AMD_ID_LV800T:
 		info->flash_id += FLASH_AM800T;
 		info->sector_count = 19;
 		info->size = 0x00100000;
 		break;			/* => 1 MB */
 
-	case (CFG_FLASH_CHAR_SIZE) AMD_ID_LV800B:
+	case (CONFIG_SYS_FLASH_CHAR_SIZE) AMD_ID_LV800B:
 		info->flash_id += FLASH_AM800B;
 		info->sector_count = 19;
 		info->size = 0x00100000;
 		break;			/* => 1 MB */
 
-	case (CFG_FLASH_CHAR_SIZE) AMD_ID_LV160T:
+	case (CONFIG_SYS_FLASH_CHAR_SIZE) AMD_ID_LV160T:
 		info->flash_id += FLASH_AM160T;
 		info->sector_count = 35;
 		info->size = 0x00200000;
 		break;			/* => 2 MB */
 
-	case (CFG_FLASH_CHAR_SIZE) AMD_ID_LV160B:
+	case (CONFIG_SYS_FLASH_CHAR_SIZE) AMD_ID_LV160B:
 		info->flash_id += FLASH_AM160B;
 		info->sector_count = 35;
 		info->size = 0x00200000;
 		break;			/* => 2 MB */
-	case (CFG_FLASH_CHAR_SIZE) AMD_ID_MIRROR:
-		if ((CFG_FLASH_CHAR_SIZE)addr2[0x1c] == (CFG_FLASH_CHAR_SIZE)AMD_ID_LV128U_2
-				&& (CFG_FLASH_CHAR_SIZE)addr2[0x1e] ==  (CFG_FLASH_CHAR_SIZE)AMD_ID_LV128U_3) {
+	case (CONFIG_SYS_FLASH_CHAR_SIZE) AMD_ID_MIRROR:
+		if ((CONFIG_SYS_FLASH_CHAR_SIZE)addr2[0x1c] == (CONFIG_SYS_FLASH_CHAR_SIZE)AMD_ID_LV128U_2
+				&& (CONFIG_SYS_FLASH_CHAR_SIZE)addr2[0x1e] ==  (CONFIG_SYS_FLASH_CHAR_SIZE)AMD_ID_LV128U_3) {
 			info->flash_id += FLASH_AMLV128U;
 			info->sector_count = 256;
 			info->size = 0x01000000;
-		} else if ((CFG_FLASH_CHAR_SIZE)addr2[0x1c] == (CFG_FLASH_CHAR_SIZE)AMD_ID_GL128N_2
-				&& (CFG_FLASH_CHAR_SIZE)addr2[0x1e] ==  (CFG_FLASH_CHAR_SIZE)AMD_ID_GL128N_3 ) {
+		} else if ((CONFIG_SYS_FLASH_CHAR_SIZE)addr2[0x1c] == (CONFIG_SYS_FLASH_CHAR_SIZE)AMD_ID_GL128N_2
+				&& (CONFIG_SYS_FLASH_CHAR_SIZE)addr2[0x1e] ==  (CONFIG_SYS_FLASH_CHAR_SIZE)AMD_ID_GL128N_3 ) {
 			info->flash_id += FLASH_S29GL128N;
 			info->sector_count = 128;
 			info->size = 0x01000000;
@@ -904,38 +904,38 @@ static ulong flash_get_size_2(vu_long * addr, flash_info_t * info)
 	for (i = 0; i < info->sector_count; i++) {
 		/* read sector protection at sector address, (A7 .. A0) = 0x02 */
 		/* D0 = 1 if protected */
-		addr2 = (volatile CFG_FLASH_WORD_SIZE *)(info->start[i]);
+		addr2 = (volatile CONFIG_SYS_FLASH_WORD_SIZE *)(info->start[i]);
 
 		/* For AMD29033C flash we need to resend the command of *
 		 * reading flash protection for upper 8 Mb of flash     */
 		if (i == 32) {
-			addr2[CFG_FLASH_CHAR_ADDR0] = (CFG_FLASH_WORD_SIZE) 0xAAAAAAAA;
-			addr2[CFG_FLASH_CHAR_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x55555555;
-			addr2[CFG_FLASH_CHAR_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x90909090;
+			addr2[CONFIG_SYS_FLASH_CHAR_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0xAAAAAAAA;
+			addr2[CONFIG_SYS_FLASH_CHAR_ADDR1] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x55555555;
+			addr2[CONFIG_SYS_FLASH_CHAR_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x90909090;
 		}
 
 		if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST)
 			info->protect[i] = 0;
 		else
-			info->protect[i] = (CFG_FLASH_CHAR_SIZE)addr2[4] & 1;
+			info->protect[i] = (CONFIG_SYS_FLASH_CHAR_SIZE)addr2[4] & 1;
 	}
 
 	/* issue bank reset to return to read mode */
-	addr2[0] = (CFG_FLASH_WORD_SIZE) 0xF0F0F0F0;
+	addr2[0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0xF0F0F0F0;
 	return info->size;
 }
 
 static int wait_for_DQ7_2(flash_info_t * info, int sect)
 {
 	ulong start, now, last;
-	volatile CFG_FLASH_WORD_SIZE *addr =
-	    (CFG_FLASH_WORD_SIZE *) (info->start[sect]);
+	volatile CONFIG_SYS_FLASH_WORD_SIZE *addr =
+	    (CONFIG_SYS_FLASH_WORD_SIZE *) (info->start[sect]);
 
 	start = get_timer(0);
 	last = start;
-	while (((CFG_FLASH_WORD_SIZE)addr[0] & (CFG_FLASH_WORD_SIZE) 0x80808080) !=
-	       (CFG_FLASH_WORD_SIZE) 0x80808080) {
-		if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+	while (((CONFIG_SYS_FLASH_WORD_SIZE)addr[0] & (CONFIG_SYS_FLASH_WORD_SIZE) 0x80808080) !=
+	       (CONFIG_SYS_FLASH_WORD_SIZE) 0x80808080) {
+		if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
 			printf("Timeout\n");
 			return -1;
 		}
@@ -950,8 +950,8 @@ static int wait_for_DQ7_2(flash_info_t * info, int sect)
 
 static int flash_erase_2(flash_info_t * info, int s_first, int s_last)
 {
-	volatile CFG_FLASH_WORD_SIZE *addr = (CFG_FLASH_WORD_SIZE *) (info->start[0]);
-	volatile CFG_FLASH_WORD_SIZE *addr2;
+	volatile CONFIG_SYS_FLASH_WORD_SIZE *addr = (CONFIG_SYS_FLASH_WORD_SIZE *) (info->start[0]);
+	volatile CONFIG_SYS_FLASH_WORD_SIZE *addr2;
 	int flag, prot, sect, l_sect;
 	int i;
 
@@ -991,24 +991,24 @@ static int flash_erase_2(flash_info_t * info, int s_first, int s_last)
 	/* Start erase on unprotected sectors */
 	for (sect = s_first; sect <= s_last; sect++) {
 		if (info->protect[sect] == 0) {	/* not protected */
-			addr2 = (CFG_FLASH_WORD_SIZE *) (info->start[sect]);
+			addr2 = (CONFIG_SYS_FLASH_WORD_SIZE *) (info->start[sect]);
 
 			if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) {
-				addr[CFG_FLASH_CHAR_ADDR0] = (CFG_FLASH_WORD_SIZE) 0xAAAAAAAA;
-				addr[CFG_FLASH_CHAR_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x55555555;
-				addr[CFG_FLASH_CHAR_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x80808080;
-				addr[CFG_FLASH_CHAR_ADDR0] = (CFG_FLASH_WORD_SIZE) 0xAAAAAAAA;
-				addr[CFG_FLASH_CHAR_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x55555555;
-				addr2[0] = (CFG_FLASH_WORD_SIZE) 0x50505050;	/* block erase */
+				addr[CONFIG_SYS_FLASH_CHAR_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0xAAAAAAAA;
+				addr[CONFIG_SYS_FLASH_CHAR_ADDR1] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x55555555;
+				addr[CONFIG_SYS_FLASH_CHAR_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x80808080;
+				addr[CONFIG_SYS_FLASH_CHAR_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0xAAAAAAAA;
+				addr[CONFIG_SYS_FLASH_CHAR_ADDR1] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x55555555;
+				addr2[0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x50505050;	/* block erase */
 				for (i = 0; i < 50; i++)
 					udelay(1000);	/* wait 1 ms */
 			} else {
-				addr[CFG_FLASH_CHAR_ADDR0] = (CFG_FLASH_WORD_SIZE) 0xAAAAAAAA;
-				addr[CFG_FLASH_CHAR_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x55555555;
-				addr[CFG_FLASH_CHAR_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x80808080;
-				addr[CFG_FLASH_CHAR_ADDR0] = (CFG_FLASH_WORD_SIZE) 0xAAAAAAAA;
-				addr[CFG_FLASH_CHAR_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x55555555;
-				addr2[0] = (CFG_FLASH_WORD_SIZE) 0x30303030;	/* sector erase */
+				addr[CONFIG_SYS_FLASH_CHAR_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0xAAAAAAAA;
+				addr[CONFIG_SYS_FLASH_CHAR_ADDR1] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x55555555;
+				addr[CONFIG_SYS_FLASH_CHAR_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x80808080;
+				addr[CONFIG_SYS_FLASH_CHAR_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0xAAAAAAAA;
+				addr[CONFIG_SYS_FLASH_CHAR_ADDR1] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x55555555;
+				addr2[0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x30303030;	/* sector erase */
 			}
 			l_sect = sect;
 			/*
@@ -1030,8 +1030,8 @@ static int flash_erase_2(flash_info_t * info, int s_first, int s_last)
 	udelay(1000);
 
 	/* reset to read mode */
-	addr = (CFG_FLASH_WORD_SIZE *) info->start[0];
-	addr[0] = (CFG_FLASH_WORD_SIZE) 0xF0F0F0F0; /* reset bank */
+	addr = (CONFIG_SYS_FLASH_WORD_SIZE *) info->start[0];
+	addr[0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0xF0F0F0F0; /* reset bank */
 
 	printf(" done\n");
 	return 0;
@@ -1039,9 +1039,9 @@ static int flash_erase_2(flash_info_t * info, int s_first, int s_last)
 
 static int write_word_2(flash_info_t * info, ulong dest, ulong data)
 {
-	volatile CFG_FLASH_WORD_SIZE *addr2 = (CFG_FLASH_WORD_SIZE *) (info->start[0]);
-	volatile CFG_FLASH_WORD_SIZE *dest2 = (CFG_FLASH_WORD_SIZE *) dest;
-	volatile CFG_FLASH_WORD_SIZE *data2 = (CFG_FLASH_WORD_SIZE *) & data;
+	volatile CONFIG_SYS_FLASH_WORD_SIZE *addr2 = (CONFIG_SYS_FLASH_WORD_SIZE *) (info->start[0]);
+	volatile CONFIG_SYS_FLASH_WORD_SIZE *dest2 = (CONFIG_SYS_FLASH_WORD_SIZE *) dest;
+	volatile CONFIG_SYS_FLASH_WORD_SIZE *data2 = (CONFIG_SYS_FLASH_WORD_SIZE *) & data;
 	ulong start;
 	int i;
 
@@ -1050,15 +1050,15 @@ static int write_word_2(flash_info_t * info, ulong dest, ulong data)
 		return 2;
 	}
 
-	for (i = 0; i < 4 / sizeof(CFG_FLASH_WORD_SIZE); i++) {
+	for (i = 0; i < 4 / sizeof(CONFIG_SYS_FLASH_WORD_SIZE); i++) {
 		int flag;
 
 		/* Disable interrupts which might cause a timeout here */
 		flag = disable_interrupts();
 
-		addr2[CFG_FLASH_CHAR_ADDR0] = (CFG_FLASH_WORD_SIZE) 0xAAAAAAAA;
-		addr2[CFG_FLASH_CHAR_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x55555555;
-		addr2[CFG_FLASH_CHAR_ADDR0] = (CFG_FLASH_WORD_SIZE) 0xA0A0A0A0;
+		addr2[CONFIG_SYS_FLASH_CHAR_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0xAAAAAAAA;
+		addr2[CONFIG_SYS_FLASH_CHAR_ADDR1] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x55555555;
+		addr2[CONFIG_SYS_FLASH_CHAR_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0xA0A0A0A0;
 
 		dest2[i] = data2[i];
 
@@ -1068,10 +1068,10 @@ static int write_word_2(flash_info_t * info, ulong dest, ulong data)
 
 		/* data polling for D7 */
 		start = get_timer(0);
-		while ((dest2[i] & (CFG_FLASH_WORD_SIZE) 0x80808080) !=
-		       (data2[i] & (CFG_FLASH_WORD_SIZE) 0x80808080)) {
+		while ((dest2[i] & (CONFIG_SYS_FLASH_WORD_SIZE) 0x80808080) !=
+		       (data2[i] & (CONFIG_SYS_FLASH_WORD_SIZE) 0x80808080)) {
 
-			if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+			if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
 				return 1;
 			}
 		}
diff --git a/board/amcc/taihu/taihu.c b/board/amcc/taihu/taihu.c
index 254e3eb83..6e9330f68 100644
--- a/board/amcc/taihu/taihu.c
+++ b/board/amcc/taihu/taihu.c
@@ -28,6 +28,7 @@
 #include <asm/processor.h>
 #include <asm/io.h>
 #include <spi.h>
+#include <netdev.h>
 #include <asm/gpio.h>
 
 extern int lcd_init(void);
@@ -47,8 +48,8 @@ int board_early_init_f(void)
 	mtdcr(uicsr, 0xFFFFFFFF);	/* clear all ints */
 	mtdcr(uicvcr, 0x00000001);	/* set vect base=0,INT0 highest priority */
 
-	mtebc(pb3ap, CFG_EBC_PB3AP);	/* memory bank 3 (CPLD_LCM) initialization */
-	mtebc(pb3cr, CFG_EBC_PB3CR);
+	mtebc(pb3ap, CONFIG_SYS_EBC_PB3AP);	/* memory bank 3 (CPLD_LCM) initialization */
+	mtebc(pb3cr, CONFIG_SYS_EBC_PB3CR);
 
 	/*
 	 * Configure CPC0_PCI to enable PerWE as output
@@ -77,15 +78,6 @@ int checkboard(void)
 	return 0;
 }
 
-/*************************************************************************
- *  phys_size_t initdram
- *
- ************************************************************************/
-phys_size_t initdram(int board)
-{
-	return CFG_SDRAM_SIZE_PER_BANK * CFG_SDRAM_BANKS; /* 128Mbytes */
-}
-
 static int do_sw_stat(cmd_tbl_t* cmd_tp, int flags, int argc, char *argv[])
 {
 	char stat;
@@ -200,3 +192,8 @@ int pci_pre_init(struct pci_controller *hose)
 	return 1;
 }
 #endif /* CONFIG_PCI */
+
+int board_eth_init(bd_t *bis)
+{
+	return pci_eth_init(bis);
+}
diff --git a/board/amcc/taihu/u-boot.lds b/board/amcc/taihu/u-boot.lds
index d52b51ae1..fd5f3dfd1 100644
--- a/board/amcc/taihu/u-boot.lds
+++ b/board/amcc/taihu/u-boot.lds
@@ -130,6 +130,7 @@ SECTIONS
    *(.dynbss)
    *(.bss)
    *(COMMON)
+   . = ALIGN(4);
   }
   _end = . ;
   PROVIDE (end = .);
diff --git a/board/amcc/taihu/update.c b/board/amcc/taihu/update.c
index 55ad535c8..52bad56bf 100644
--- a/board/amcc/taihu/update.c
+++ b/board/amcc/taihu/update.c
@@ -101,7 +101,7 @@ static uchar buf_66[] =
 static int update_boot_eeprom(cmd_tbl_t* cmdtp, int flag, int argc, char *argv[])
 {
 	ulong len = 0x20;
-	uchar chip = CFG_I2C_EEPROM_ADDR;
+	uchar chip = CONFIG_SYS_I2C_EEPROM_ADDR;
 	uchar *pbuf;
 	uchar base;
 	int i;
diff --git a/board/amcc/taishan/config.mk b/board/amcc/taishan/config.mk
index 4eefff21d..ee5eb1ba6 100644
--- a/board/amcc/taishan/config.mk
+++ b/board/amcc/taishan/config.mk
@@ -40,5 +40,5 @@ PLATFORM_CPPFLAGS += -DDEBUG
 endif
 
 ifeq ($(dbcr),1)
-PLATFORM_CPPFLAGS += -DCFG_INIT_DBCR=0x8cff0000
+PLATFORM_CPPFLAGS += -DCONFIG_SYS_INIT_DBCR=0x8cff0000
 endif
diff --git a/board/amcc/taishan/init.S b/board/amcc/taishan/init.S
index 8db043ba1..748ec0ab5 100644
--- a/board/amcc/taishan/init.S
+++ b/board/amcc/taishan/init.S
@@ -89,9 +89,9 @@
 tlbtab:
 	tlbtab_start
 	tlbentry( 0xf0000000, SZ_256M, 0xf0000000, 1, AC_R|AC_W|AC_X|SA_G|SA_I)
-	tlbentry( CFG_PERIPHERAL_BASE, SZ_256M, 0x40000000, 1, AC_R|AC_W|SA_G|SA_I)
-	tlbentry( CFG_ISRAM_BASE, SZ_256K, 0x80000000, 0, AC_R|AC_W|AC_X )
-	tlbentry( CFG_SDRAM_BASE, SZ_256M, 0x00000000, 0, AC_R|AC_W|AC_X|SA_G|SA_I )
-	tlbentry( CFG_PCI_BASE, SZ_256M, 0x00000000, 2, AC_R|AC_W|SA_G|SA_I )
-	tlbentry( CFG_PCI_MEMBASE, SZ_256M, 0x00000000, 3, AC_R|AC_W|SA_G|SA_I )
+	tlbentry( CONFIG_SYS_PERIPHERAL_BASE, SZ_256M, 0x40000000, 1, AC_R|AC_W|SA_G|SA_I)
+	tlbentry( CONFIG_SYS_ISRAM_BASE, SZ_256K, 0x80000000, 0, AC_R|AC_W|AC_X )
+	tlbentry( CONFIG_SYS_SDRAM_BASE, SZ_256M, 0x00000000, 0, AC_R|AC_W|AC_X|SA_G|SA_I )
+	tlbentry( CONFIG_SYS_PCI_BASE, SZ_256M, 0x00000000, 2, AC_R|AC_W|SA_G|SA_I )
+	tlbentry( CONFIG_SYS_PCI_MEMBASE, SZ_256M, 0x00000000, 3, AC_R|AC_W|SA_G|SA_I )
 	tlbtab_end
diff --git a/board/amcc/taishan/lcd.c b/board/amcc/taishan/lcd.c
index 8d2dce35c..624ae40f6 100644
--- a/board/amcc/taishan/lcd.c
+++ b/board/amcc/taishan/lcd.c
@@ -31,9 +31,9 @@
 
 #define LCD_DELAY_NORMAL_US	100
 #define LCD_DELAY_NORMAL_MS	2
-#define LCD_CMD_ADDR		((volatile char *)(CFG_EBC2_LCM_BASE))
-#define LCD_DATA_ADDR		((volatile char *)(CFG_EBC2_LCM_BASE+1))
-#define LCD_BLK_CTRL		((volatile char *)(CFG_EBC1_FPGA_BASE+0x2))
+#define LCD_CMD_ADDR		((volatile char *)(CONFIG_SYS_EBC2_LCM_BASE))
+#define LCD_DATA_ADDR		((volatile char *)(CONFIG_SYS_EBC2_LCM_BASE+1))
+#define LCD_BLK_CTRL		((volatile char *)(CONFIG_SYS_EBC1_FPGA_BASE+0x2))
 
 #define mdelay(t)	({unsigned long msec=(t); while (msec--) { udelay(1000);}})
 
@@ -359,7 +359,7 @@ void set_phy_normal_mode(void)
 static int do_led_test_off(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
 {
 	volatile unsigned int *GpioOr =
-		(volatile unsigned int *)(CFG_PERIPHERAL_BASE + 0x700);
+		(volatile unsigned int *)(CONFIG_SYS_PERIPHERAL_BASE + 0x700);
 	*GpioOr |= 0x00300000;
 	return 0;
 }
@@ -367,7 +367,7 @@ static int do_led_test_off(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
 static int do_led_test_on(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
 {
 	volatile unsigned int *GpioOr =
-		(volatile unsigned int *)(CFG_PERIPHERAL_BASE + 0x700);
+		(volatile unsigned int *)(CONFIG_SYS_PERIPHERAL_BASE + 0x700);
 	*GpioOr &= ~0x00300000;
 	return 0;
 }
diff --git a/board/amcc/taishan/taishan.c b/board/amcc/taishan/taishan.c
index fdd82e7cc..28bdab5db 100644
--- a/board/amcc/taishan/taishan.c
+++ b/board/amcc/taishan/taishan.c
@@ -27,8 +27,9 @@
 #include <asm/processor.h>
 #include <spd_sdram.h>
 #include <ppc4xx_enet.h>
+#include <netdev.h>
 
-#ifdef CFG_INIT_SHOW_RESET_REG
+#ifdef CONFIG_SYS_INIT_SHOW_RESET_REG
 void show_reset_reg(void);
 #endif
 
@@ -62,7 +63,7 @@ int board_early_init_f (void)
 	      EBC_BXAP_TH_ENCODE(3) | EBC_BXAP_RE_DISABLED |
 	      EBC_BXAP_BEM_WRITEONLY |
 	      EBC_BXAP_PEN_DISABLED);
-	mtebc(pb0cr, EBC_BXCR_BAS_ENCODE(CFG_FLASH_BASE) |
+	mtebc(pb0cr, EBC_BXCR_BAS_ENCODE(CONFIG_SYS_FLASH_BASE) |
 	      EBC_BXCR_BS_64MB | EBC_BXCR_BU_RW|EBC_BXCR_BW_32BIT);
 
 	/*-------------------------------------------------------------------------+
@@ -172,9 +173,9 @@ int board_early_init_f (void)
 	mtsdr(sdr_pfc1,reg);
 
 	/* Set GPIO 10 and 11 as output */
-	GpioOdr	= (volatile unsigned int*)(CFG_PERIPHERAL_BASE+0x718);
-	GpioTcr = (volatile unsigned int*)(CFG_PERIPHERAL_BASE+0x704);
-	GpioOr  = (volatile unsigned int*)(CFG_PERIPHERAL_BASE+0x700);
+	GpioOdr	= (volatile unsigned int*)(CONFIG_SYS_PERIPHERAL_BASE+0x718);
+	GpioTcr = (volatile unsigned int*)(CONFIG_SYS_PERIPHERAL_BASE+0x704);
+	GpioOr  = (volatile unsigned int*)(CONFIG_SYS_PERIPHERAL_BASE+0x700);
 
 	*GpioOdr &= ~(0x00300000);
 	*GpioTcr |= 0x00300000;
@@ -201,7 +202,7 @@ int checkboard (void)
 	}
 	putc ('\n');
 
-#ifdef CFG_INIT_SHOW_RESET_REG
+#ifdef CONFIG_SYS_INIT_SHOW_RESET_REG
 	show_reset_reg();
 #endif
 
@@ -247,7 +248,7 @@ int pci_pre_init(struct pci_controller * hose )
  *	may not be sufficient for a given board.
  *
  ************************************************************************/
-#if defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT)
+#if defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT)
 void pci_target_init(struct pci_controller * hose )
 {
 	/*--------------------------------------------------------------------------+
@@ -262,7 +263,7 @@ void pci_target_init(struct pci_controller * hose )
 	 * Map all of SDRAM to PCI address 0x0000_0000. Note that the 440 strapping
 	 * options to not support sizes such as 128/256 MB.
 	 *--------------------------------------------------------------------------*/
-	out32r( PCIX0_PIM0LAL, CFG_SDRAM_BASE );
+	out32r( PCIX0_PIM0LAL, CONFIG_SYS_SDRAM_BASE );
 	out32r( PCIX0_PIM0LAH, 0 );
 	out32r( PCIX0_PIM0SA, ~(gd->ram_size - 1) | 1 );
 
@@ -271,12 +272,12 @@ void pci_target_init(struct pci_controller * hose )
 	/*--------------------------------------------------------------------------+
 	 * Program the board's subsystem id/vendor id
 	 *--------------------------------------------------------------------------*/
-	out16r( PCIX0_SBSYSVID, CFG_PCI_SUBSYS_VENDORID );
-	out16r( PCIX0_SBSYSID, CFG_PCI_SUBSYS_DEVICEID );
+	out16r( PCIX0_SBSYSVID, CONFIG_SYS_PCI_SUBSYS_VENDORID );
+	out16r( PCIX0_SBSYSID, CONFIG_SYS_PCI_SUBSYS_DEVICEID );
 
 	out16r( PCIX0_CMD, in16r(PCIX0_CMD) | PCI_COMMAND_MEMORY );
 }
-#endif /* defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT) */
+#endif /* defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT) */
 
 /*************************************************************************
  *  is_pci_host
@@ -311,3 +312,8 @@ int post_hotkeys_pressed(void)
 	return (ctrlc());
 }
 #endif
+
+int board_eth_init(bd_t *bis)
+{
+	return pci_eth_init(bis);
+}
diff --git a/board/amcc/taishan/u-boot.lds b/board/amcc/taishan/u-boot.lds
index 85d375938..e62080839 100644
--- a/board/amcc/taishan/u-boot.lds
+++ b/board/amcc/taishan/u-boot.lds
@@ -137,6 +137,7 @@ SECTIONS
    *(.dynbss)
    *(.bss)
    *(COMMON)
+   . = ALIGN(4);
   }
   _end = . ;
   PROVIDE (end = .);
diff --git a/board/amcc/taishan/update.c b/board/amcc/taishan/update.c
index ed2c196dc..96b918be0 100644
--- a/board/amcc/taishan/update.c
+++ b/board/amcc/taishan/update.c
@@ -51,7 +51,7 @@ const uchar bootstrap_buf[16] = {
 static int update_boot_eeprom(void)
 {
 	ulong len = 0x10;
-	uchar chip = CFG_BOOTSTRAP_IIC_ADDR;
+	uchar chip = CONFIG_SYS_BOOTSTRAP_IIC_ADDR;
 	uchar *pbuf = (uchar *)bootstrap_buf;
 	int ii, jj;
 
diff --git a/board/amcc/walnut/flash.c b/board/amcc/walnut/flash.c
index 056f9b936..d363564d5 100644
--- a/board/amcc/walnut/flash.c
+++ b/board/amcc/walnut/flash.c
@@ -58,7 +58,7 @@ unsigned long flash_init(void)
 	unsigned long base_b0, base_b1;
 
 	/* Init: no FLASHes known */
-	for (i = 0; i < CFG_MAX_FLASH_BANKS; ++i) {
+	for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
 		flash_info[i].flash_id = FLASH_UNKNOWN;
 	}
 
@@ -73,21 +73,21 @@ unsigned long flash_init(void)
 	}
 
 	/* Only one bank */
-	if (CFG_MAX_FLASH_BANKS == 1) {
+	if (CONFIG_SYS_MAX_FLASH_BANKS == 1) {
 		/* Setup offsets */
 		flash_get_offsets(FLASH_BASE0_PRELIM, &flash_info[0]);
 
 		/* Monitor protection ON by default */
 		(void)flash_protect(FLAG_PROTECT_SET,
-				    CFG_MONITOR_BASE,
-				    CFG_MONITOR_BASE + CFG_MONITOR_LEN - 1,
+				    CONFIG_SYS_MONITOR_BASE,
+				    CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN - 1,
 				    &flash_info[0]);
-#ifdef CFG_ENV_IS_IN_FLASH
-		(void)flash_protect(FLAG_PROTECT_SET, CFG_ENV_ADDR,
-				    CFG_ENV_ADDR + CFG_ENV_SECT_SIZE - 1,
+#ifdef CONFIG_ENV_IS_IN_FLASH
+		(void)flash_protect(FLAG_PROTECT_SET, CONFIG_ENV_ADDR,
+				    CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE - 1,
 				    &flash_info[0]);
-		(void)flash_protect(FLAG_PROTECT_SET, CFG_ENV_ADDR_REDUND,
-				    CFG_ENV_ADDR_REDUND + CFG_ENV_SECT_SIZE - 1,
+		(void)flash_protect(FLAG_PROTECT_SET, CONFIG_ENV_ADDR_REDUND,
+				    CONFIG_ENV_ADDR_REDUND + CONFIG_ENV_SECT_SIZE - 1,
 				    &flash_info[0]);
 #endif
 
diff --git a/board/amcc/walnut/u-boot.lds b/board/amcc/walnut/u-boot.lds
index 5d07e4438..c9472f934 100644
--- a/board/amcc/walnut/u-boot.lds
+++ b/board/amcc/walnut/u-boot.lds
@@ -131,6 +131,7 @@ SECTIONS
    *(.dynbss)
    *(.bss)
    *(COMMON)
+   . = ALIGN(4);
   }
   _end = . ;
   PROVIDE (end = .);
diff --git a/board/amcc/yosemite/config.mk b/board/amcc/yosemite/config.mk
index 4ab0ea008..df5466e2c 100644
--- a/board/amcc/yosemite/config.mk
+++ b/board/amcc/yosemite/config.mk
@@ -40,5 +40,5 @@ PLATFORM_CPPFLAGS += -DDEBUG
 endif
 
 ifeq ($(dbcr),1)
-PLATFORM_CPPFLAGS += -DCFG_INIT_DBCR=0x8cff0000
+PLATFORM_CPPFLAGS += -DCONFIG_SYS_INIT_DBCR=0x8cff0000
 endif
diff --git a/board/amcc/yosemite/init.S b/board/amcc/yosemite/init.S
index 425ad0868..f9382365c 100644
--- a/board/amcc/yosemite/init.S
+++ b/board/amcc/yosemite/init.S
@@ -91,22 +91,22 @@ tlbtab:
      * BOOT_CS (FLASH) must be first. Before relocation SA_I can be off to use the
      * speed up boot process. It is patched after relocation to enable SA_I
      */
-    tlbentry( CFG_BOOT_BASE_ADDR, SZ_256M, CFG_BOOT_BASE_ADDR, 0, AC_R|AC_W|AC_X|SA_G/*|SA_I*/)
+    tlbentry( CONFIG_SYS_BOOT_BASE_ADDR, SZ_256M, CONFIG_SYS_BOOT_BASE_ADDR, 0, AC_R|AC_W|AC_X|SA_G/*|SA_I*/)
 
     /* TLB-entry for init-ram in dcache (SA_I must be turned off!) */
-    tlbentry( CFG_INIT_RAM_ADDR, SZ_64K, CFG_INIT_RAM_ADDR, 0, AC_R|AC_W|AC_X|SA_G )
+    tlbentry( CONFIG_SYS_INIT_RAM_ADDR, SZ_64K, CONFIG_SYS_INIT_RAM_ADDR, 0, AC_R|AC_W|AC_X|SA_G )
 
-    tlbentry( CFG_SDRAM_BASE, SZ_256M, CFG_SDRAM_BASE, 0, AC_R|AC_W|AC_X|SA_G|SA_I )
-    tlbentry( CFG_PCI_BASE, SZ_256M, CFG_PCI_BASE, 0, AC_R|AC_W|SA_G|SA_I )
-    tlbentry( CFG_NVRAM_BASE_ADDR, SZ_256M, CFG_NVRAM_BASE_ADDR, 0, AC_R|AC_W|AC_X|SA_W|SA_I )
+    tlbentry( CONFIG_SYS_SDRAM_BASE, SZ_256M, CONFIG_SYS_SDRAM_BASE, 0, AC_R|AC_W|AC_X|SA_G|SA_I )
+    tlbentry( CONFIG_SYS_PCI_BASE, SZ_256M, CONFIG_SYS_PCI_BASE, 0, AC_R|AC_W|SA_G|SA_I )
+    tlbentry( CONFIG_SYS_NVRAM_BASE_ADDR, SZ_256M, CONFIG_SYS_NVRAM_BASE_ADDR, 0, AC_R|AC_W|AC_X|SA_W|SA_I )
 
     /* PCI */
-    tlbentry( CFG_PCI_MEMBASE, SZ_256M, CFG_PCI_MEMBASE, 0, AC_R|AC_W|SA_G|SA_I )
-    tlbentry( CFG_PCI_MEMBASE1, SZ_256M, CFG_PCI_MEMBASE1, 0, AC_R|AC_W|SA_G|SA_I )
-    tlbentry( CFG_PCI_MEMBASE2, SZ_256M, CFG_PCI_MEMBASE2, 0, AC_R|AC_W|SA_G|SA_I )
-    tlbentry( CFG_PCI_MEMBASE3, SZ_256M, CFG_PCI_MEMBASE3, 0, AC_R|AC_W|SA_G|SA_I )
+    tlbentry( CONFIG_SYS_PCI_MEMBASE, SZ_256M, CONFIG_SYS_PCI_MEMBASE, 0, AC_R|AC_W|SA_G|SA_I )
+    tlbentry( CONFIG_SYS_PCI_MEMBASE1, SZ_256M, CONFIG_SYS_PCI_MEMBASE1, 0, AC_R|AC_W|SA_G|SA_I )
+    tlbentry( CONFIG_SYS_PCI_MEMBASE2, SZ_256M, CONFIG_SYS_PCI_MEMBASE2, 0, AC_R|AC_W|SA_G|SA_I )
+    tlbentry( CONFIG_SYS_PCI_MEMBASE3, SZ_256M, CONFIG_SYS_PCI_MEMBASE3, 0, AC_R|AC_W|SA_G|SA_I )
 
     /* USB 2.0 Device */
-    tlbentry( CFG_USB_DEVICE, SZ_1K, 0x50000000, 0, AC_R|AC_W|SA_G|SA_I )
+    tlbentry( CONFIG_SYS_USB_DEVICE, SZ_1K, 0x50000000, 0, AC_R|AC_W|SA_G|SA_I )
 
     tlbtab_end
diff --git a/board/amcc/yosemite/u-boot.lds b/board/amcc/yosemite/u-boot.lds
index c12aad7e3..ccb510e7e 100644
--- a/board/amcc/yosemite/u-boot.lds
+++ b/board/amcc/yosemite/u-boot.lds
@@ -137,6 +137,7 @@ SECTIONS
    *(.dynbss)
    *(.bss)
    *(COMMON)
+   . = ALIGN(4);
   }
   _end = . ;
   PROVIDE (end = .);
diff --git a/board/amcc/yosemite/yosemite.c b/board/amcc/yosemite/yosemite.c
index 05be40acd..3982896cb 100644
--- a/board/amcc/yosemite/yosemite.c
+++ b/board/amcc/yosemite/yosemite.c
@@ -31,7 +31,7 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
-extern flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips	*/
+extern flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips	*/
 
 int board_early_init_f(void)
 {
@@ -107,18 +107,18 @@ int board_early_init_f(void)
 	mtsdr(sdr_pfc1, 0x00048000);	/* Pin function: UART0 has 4 pins */
 
 	/*clear tmrclk divisor */
-	*(unsigned char *)(CFG_BCSR_BASE | 0x04) = 0x00;
+	*(unsigned char *)(CONFIG_SYS_BCSR_BASE | 0x04) = 0x00;
 
 	/*enable ethernet */
-	*(unsigned char *)(CFG_BCSR_BASE | 0x08) = 0xf0;
+	*(unsigned char *)(CONFIG_SYS_BCSR_BASE | 0x08) = 0xf0;
 
 #ifdef CONFIG_440EP
 	/*enable usb 1.1 fs device and remove usb 2.0 reset */
-	*(unsigned char *)(CFG_BCSR_BASE | 0x09) = 0x00;
+	*(unsigned char *)(CONFIG_SYS_BCSR_BASE | 0x09) = 0x00;
 #endif
 
 	/*get rid of flash write protect */
-	*(unsigned char *)(CFG_BCSR_BASE | 0x07) = 0x00;
+	*(unsigned char *)(CONFIG_SYS_BCSR_BASE | 0x07) = 0x00;
 
 	return 0;
 }
@@ -167,7 +167,7 @@ int misc_init_r (void)
 
 	/* Monitor protection ON by default */
 	(void)flash_protect(FLAG_PROTECT_SET,
-			    -CFG_MONITOR_LEN,
+			    -CONFIG_SYS_MONITOR_LEN,
 			    0xffffffff,
 			    &flash_info[0]);
 
@@ -186,8 +186,8 @@ int checkboard(void)
 	printf("Board: Yellowstone - AMCC PPC440GR Evaluation Board");
 #endif
 
-	rev = in_8((void *)(CFG_BCSR_BASE + 0));
-	val = in_8((void *)(CFG_BCSR_BASE + 5)) & CFG_BCSR5_PCI66EN;
+	rev = in_8((void *)(CONFIG_SYS_BCSR_BASE + 0));
+	val = in_8((void *)(CONFIG_SYS_BCSR_BASE + 5)) & CONFIG_SYS_BCSR5_PCI66EN;
 	printf(", Rev. %X, PCI=%d MHz", rev, val ? 66 : 33);
 
 	if (s != NULL) {
@@ -329,7 +329,7 @@ phys_size_t initdram(int board)
 	sdram_tr1_set(0x08000000, &tr1_bank2);
 	mtsdram(mem_tr1, (((tr1_bank1+tr1_bank2)/2) | 0x80800800));
 
-	return CFG_SDRAM_BANKS * (CFG_KBYTES_SDRAM * 1024);	/* return bytes */
+	return CONFIG_SYS_SDRAM_BANKS * (CONFIG_SYS_KBYTES_SDRAM * 1024);	/* return bytes */
 }
 
 /*************************************************************************
@@ -395,7 +395,7 @@ int pci_pre_init(struct pci_controller *hose)
  *	may not be sufficient for a given board.
  *
  ************************************************************************/
-#if defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT)
+#if defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT)
 void pci_target_init(struct pci_controller *hose)
 {
 	/*--------------------------------------------------------------------------+
@@ -409,14 +409,14 @@ void pci_target_init(struct pci_controller *hose)
 	  | Make this region non-prefetchable.
 	  +--------------------------------------------------------------------------*/
 	out32r(PCIX0_PMM0MA, 0x00000000);	/* PMM0 Mask/Attribute - disabled b4 setting */
-	out32r(PCIX0_PMM0LA, CFG_PCI_MEMBASE);	/* PMM0 Local Address */
-	out32r(PCIX0_PMM0PCILA, CFG_PCI_MEMBASE);	/* PMM0 PCI Low Address */
+	out32r(PCIX0_PMM0LA, CONFIG_SYS_PCI_MEMBASE);	/* PMM0 Local Address */
+	out32r(PCIX0_PMM0PCILA, CONFIG_SYS_PCI_MEMBASE);	/* PMM0 PCI Low Address */
 	out32r(PCIX0_PMM0PCIHA, 0x00000000);	/* PMM0 PCI High Address */
 	out32r(PCIX0_PMM0MA, 0xE0000001);	/* 512M + No prefetching, and enable region */
 
 	out32r(PCIX0_PMM1MA, 0x00000000);	/* PMM0 Mask/Attribute - disabled b4 setting */
-	out32r(PCIX0_PMM1LA, CFG_PCI_MEMBASE2);	/* PMM0 Local Address */
-	out32r(PCIX0_PMM1PCILA, CFG_PCI_MEMBASE2);	/* PMM0 PCI Low Address */
+	out32r(PCIX0_PMM1LA, CONFIG_SYS_PCI_MEMBASE2);	/* PMM0 Local Address */
+	out32r(PCIX0_PMM1PCILA, CONFIG_SYS_PCI_MEMBASE2);	/* PMM0 PCI Low Address */
 	out32r(PCIX0_PMM1PCIHA, 0x00000000);	/* PMM0 PCI High Address */
 	out32r(PCIX0_PMM1MA, 0xE0000001);	/* 512M + No prefetching, and enable region */
 
@@ -431,8 +431,8 @@ void pci_target_init(struct pci_controller *hose)
 
 	/* Program the board's subsystem id/vendor id */
 	pci_write_config_word(0, PCI_SUBSYSTEM_VENDOR_ID,
-			      CFG_PCI_SUBSYS_VENDORID);
-	pci_write_config_word(0, PCI_SUBSYSTEM_ID, CFG_PCI_SUBSYS_ID);
+			      CONFIG_SYS_PCI_SUBSYS_VENDORID);
+	pci_write_config_word(0, PCI_SUBSYSTEM_ID, CONFIG_SYS_PCI_SUBSYS_ID);
 
 	/* Configure command register as bus master */
 	pci_write_config_word(0, PCI_COMMAND, PCI_COMMAND_MASTER);
@@ -446,13 +446,13 @@ void pci_target_init(struct pci_controller *hose)
 	pci_write_config_dword(0, PCI_BRDGOPT2, 0x00000101);
 
 }
-#endif				/* defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT) */
+#endif				/* defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT) */
 
 /*************************************************************************
  *  pci_master_init
  *
  ************************************************************************/
-#if defined(CONFIG_PCI) && defined(CFG_PCI_MASTER_INIT)
+#if defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_MASTER_INIT)
 void pci_master_init(struct pci_controller *hose)
 {
 	unsigned short temp_short;
@@ -467,7 +467,7 @@ void pci_master_init(struct pci_controller *hose)
 			      temp_short | PCI_COMMAND_MASTER |
 			      PCI_COMMAND_MEMORY);
 }
-#endif				/* defined(CONFIG_PCI) && defined(CFG_PCI_MASTER_INIT) */
+#endif				/* defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_MASTER_INIT) */
 
 /*************************************************************************
  *  is_pci_host
@@ -508,5 +508,5 @@ void hw_watchdog_reset(void)
 void board_reset(void)
 {
 	/* give reset to BCSR */
-	*(unsigned char *)(CFG_BCSR_BASE | 0x06) = 0x09;
+	*(unsigned char *)(CONFIG_SYS_BCSR_BASE | 0x06) = 0x09;
 }
diff --git a/board/amcc/yucca/cmd_yucca.c b/board/amcc/yucca/cmd_yucca.c
index e698b201f..d9698602b 100644
--- a/board/amcc/yucca/cmd_yucca.c
+++ b/board/amcc/yucca/cmd_yucca.c
@@ -33,8 +33,6 @@ extern void print_evb440spe_info(void);
 static int setBootStrapClock(cmd_tbl_t *cmdtp, int incrflag,
 		int flag, int argc, char *argv[]);
 
-extern int cmd_get_data_size(char* arg, int default_size);
-
 /* ------------------------------------------------------------------------- */
 int do_evb440spe(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 {
@@ -71,7 +69,7 @@ static int setBootStrapClock(cmd_tbl_t *cmdtp, int incrflag, int flag,
 		chip = IIC0_ALT_BOOTPROM_ADDR;
 
 	do {
-		printf("enter sys clock frequency 33 or 66 Mhz or quit to abort\n");
+		printf("enter sys clock frequency 33 or 66 MHz or quit to abort\n");
 		nbytes = readline (" ? ");
 
 		if (strcmp(console_buffer, "quit") == 0)
@@ -87,12 +85,12 @@ static int setBootStrapClock(cmd_tbl_t *cmdtp, int incrflag, int flag,
 
 	do {
 		if (strcmp(sysClock, "66") == 0) {
-			printf("enter cpu clock frequency 400, 533 Mhz or quit to abort\n");
+			printf("enter cpu clock frequency 400, 533 MHz or quit to abort\n");
 		} else {
 #ifdef	CONFIG_STRESS
-			printf("enter cpu clock frequency 400, 500, 533, 667 Mhz or quit to abort\n");
+			printf("enter cpu clock frequency 400, 500, 533, 667 MHz or quit to abort\n");
 #else
-			printf("enter cpu clock frequency 400, 500, 533 Mhz or quit to abort\n");
+			printf("enter cpu clock frequency 400, 500, 533 MHz or quit to abort\n");
 #endif
 		}
 		nbytes = readline (" ? ");
@@ -132,11 +130,11 @@ static int setBootStrapClock(cmd_tbl_t *cmdtp, int incrflag, int flag,
 	} else {
 		do {
 			if (strcmp(cpuClock, "400") == 0)
-				printf("enter plb clock frequency 100, 133 Mhz or quit to abort\n");
+				printf("enter plb clock frequency 100, 133 MHz or quit to abort\n");
 
 #ifdef	CONFIG_STRESS
 			if (strcmp(cpuClock, "667") == 0)
-				printf("enter plb clock frequency 133, 166 Mhz or quit to abort\n");
+				printf("enter plb clock frequency 133, 166 MHz or quit to abort\n");
 
 #endif
 			nbytes = readline (" ? ");
@@ -162,7 +160,7 @@ static int setBootStrapClock(cmd_tbl_t *cmdtp, int incrflag, int flag,
 	}
 
 	do {
-		printf("enter Pci-X clock frequency 33, 66, 100 or 133 Mhz or quit to abort\n");
+		printf("enter Pci-X clock frequency 33, 66, 100 or 133 MHz or quit to abort\n");
 		nbytes = readline (" ? ");
 
 		if (strcmp(console_buffer, "quit") == 0)
@@ -178,10 +176,10 @@ static int setBootStrapClock(cmd_tbl_t *cmdtp, int incrflag, int flag,
 
 	} while (nbytes == 0);
 
-	printf("\nsys clk   = %sMhz\n", sysClock);
-	printf("cpu clk   = %sMhz\n", cpuClock);
-	printf("plb clk   = %sMhz\n", plbClock);
-	printf("Pci-X clk = %sMhz\n", pcixClock);
+	printf("\nsys clk   = %s MHz\n", sysClock);
+	printf("cpu clk   = %s MHz\n", cpuClock);
+	printf("plb clk   = %s MHz\n", plbClock);
+	printf("Pci-X clk = %s MHz\n", pcixClock);
 
 	do {
 		printf("\npress [y] to write I2C bootstrap \n");
diff --git a/board/amcc/yucca/config.mk b/board/amcc/yucca/config.mk
index ff454ebf1..3ce3cc171 100644
--- a/board/amcc/yucca/config.mk
+++ b/board/amcc/yucca/config.mk
@@ -38,5 +38,5 @@ PLATFORM_CPPFLAGS += -DDEBUG
 endif
 
 ifeq ($(dbcr),1)
-PLATFORM_CPPFLAGS += -DCFG_INIT_DBCR=0x8cff0000
+PLATFORM_CPPFLAGS += -DCONFIG_SYS_INIT_DBCR=0x8cff0000
 endif
diff --git a/board/amcc/yucca/flash.c b/board/amcc/yucca/flash.c
index 15b8a462b..eda49eb17 100644
--- a/board/amcc/yucca/flash.c
+++ b/board/amcc/yucca/flash.c
@@ -43,12 +43,12 @@
 #define DEBUGF(x...)
 #endif				/* DEBUG */
 
-flash_info_t flash_info[CFG_MAX_FLASH_BANKS];	/* info for FLASH chips */
+flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];	/* info for FLASH chips */
 
 /*
  * Mark big flash bank (16 bit instead of 8 bit access) in address with bit 0
  */
-static unsigned long flash_addr_table[][CFG_MAX_FLASH_BANKS] = {
+static unsigned long flash_addr_table[][CONFIG_SYS_MAX_FLASH_BANKS] = {
 	{0xfff00000, 0xfff80000, 0xe7c00001}, /* 0:boot from small flash */
 	{0x00000000, 0x00000000, 0x00000000}, /* 1:boot from pci 66      */
 	{0x00000000, 0x00000000, 0x00000000}, /* 2:boot from nand flash  */
@@ -67,7 +67,7 @@ static unsigned long flash_addr_table[][CFG_MAX_FLASH_BANKS] = {
  * Functions
  */
 static int write_word(flash_info_t * info, ulong dest, ulong data);
-#ifdef CFG_FLASH_2ND_16BIT_DEV
+#ifdef CONFIG_SYS_FLASH_2ND_16BIT_DEV
 static int write_word_1(flash_info_t * info, ulong dest, ulong data);
 static int write_word_2(flash_info_t * info, ulong dest, ulong data);
 static int flash_erase_1(flash_info_t * info, int s_first, int s_last);
@@ -198,7 +198,7 @@ void flash_print_info(flash_info_t * info)
 /*
  * The following code cannot be run from FLASH!
  */
-#ifdef CFG_FLASH_2ND_16BIT_DEV
+#ifdef CONFIG_SYS_FLASH_2ND_16BIT_DEV
 static ulong flash_get_size(vu_long * addr, flash_info_t * info)
 {
 	/* bit 0 used for big flash marking */
@@ -214,32 +214,32 @@ static ulong flash_get_size(vu_long * addr, flash_info_t * info)
 #endif
 {
 	short i;
-	CFG_FLASH_WORD_SIZE value;
+	CONFIG_SYS_FLASH_WORD_SIZE value;
 	ulong base = (ulong) addr;
-	volatile CFG_FLASH_WORD_SIZE *addr2 = (CFG_FLASH_WORD_SIZE *) addr;
+	volatile CONFIG_SYS_FLASH_WORD_SIZE *addr2 = (CONFIG_SYS_FLASH_WORD_SIZE *) addr;
 
 	DEBUGF("FLASH ADDR: %08x\n", (unsigned)addr);
 
 	/* Write auto select command: read Manufacturer ID */
-	addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00AA00AA;
-	addr2[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x00550055;
-	addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00900090;
+	addr2[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00AA00AA;
+	addr2[CONFIG_SYS_FLASH_ADDR1] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00550055;
+	addr2[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00900090;
 	udelay(1000);
 
 	value = addr2[0];
 	DEBUGF("FLASH MANUFACT: %x\n", value);
 
 	switch (value) {
-		case (CFG_FLASH_WORD_SIZE) AMD_MANUFACT:
+		case (CONFIG_SYS_FLASH_WORD_SIZE) AMD_MANUFACT:
 			info->flash_id = FLASH_MAN_AMD;
 			break;
-		case (CFG_FLASH_WORD_SIZE) FUJ_MANUFACT:
+		case (CONFIG_SYS_FLASH_WORD_SIZE) FUJ_MANUFACT:
 			info->flash_id = FLASH_MAN_FUJ;
 			break;
-		case (CFG_FLASH_WORD_SIZE) SST_MANUFACT:
+		case (CONFIG_SYS_FLASH_WORD_SIZE) SST_MANUFACT:
 			info->flash_id = FLASH_MAN_SST;
 			break;
-		case (CFG_FLASH_WORD_SIZE) STM_MANUFACT:
+		case (CONFIG_SYS_FLASH_WORD_SIZE) STM_MANUFACT:
 			info->flash_id = FLASH_MAN_STM;
 			break;
 		default:
@@ -253,67 +253,67 @@ static ulong flash_get_size(vu_long * addr, flash_info_t * info)
 	DEBUGF("\nFLASH DEVICEID: %x\n", value);
 
 	switch (value) {
-		case (CFG_FLASH_WORD_SIZE) AMD_ID_LV040B:
+		case (CONFIG_SYS_FLASH_WORD_SIZE) AMD_ID_LV040B:
 			info->flash_id += FLASH_AM040;
 			info->sector_count = 8;
 			info->size = 0x0080000;	/* => 512 ko */
 			break;
 
-		case (CFG_FLASH_WORD_SIZE) AMD_ID_F040B:
+		case (CONFIG_SYS_FLASH_WORD_SIZE) AMD_ID_F040B:
 			info->flash_id += FLASH_AM040;
 			info->sector_count = 8;
 			info->size = 0x0080000;	/* => 512 ko */
 			break;
 
-		case (CFG_FLASH_WORD_SIZE) STM_ID_M29W040B:
+		case (CONFIG_SYS_FLASH_WORD_SIZE) STM_ID_M29W040B:
 			info->flash_id += FLASH_AM040;
 			info->sector_count = 8;
 			info->size = 0x0080000;	/* => 512 ko */
 			break;
 
-		case (CFG_FLASH_WORD_SIZE) AMD_ID_F016D:
+		case (CONFIG_SYS_FLASH_WORD_SIZE) AMD_ID_F016D:
 			info->flash_id += FLASH_AMD016;
 			info->sector_count = 32;
 			info->size = 0x00200000;
 			break;		/* => 2 MB              */
 
-		case (CFG_FLASH_WORD_SIZE) AMD_ID_LV033C:
+		case (CONFIG_SYS_FLASH_WORD_SIZE) AMD_ID_LV033C:
 			info->flash_id += FLASH_AMDLV033C;
 			info->sector_count = 64;
 			info->size = 0x00400000;
 			break;		/* => 4 MB              */
 
-		case (CFG_FLASH_WORD_SIZE) AMD_ID_LV400T:
+		case (CONFIG_SYS_FLASH_WORD_SIZE) AMD_ID_LV400T:
 			info->flash_id += FLASH_AM400T;
 			info->sector_count = 11;
 			info->size = 0x00080000;
 			break;		/* => 0.5 MB            */
 
-		case (CFG_FLASH_WORD_SIZE) AMD_ID_LV400B:
+		case (CONFIG_SYS_FLASH_WORD_SIZE) AMD_ID_LV400B:
 			info->flash_id += FLASH_AM400B;
 			info->sector_count = 11;
 			info->size = 0x00080000;
 			break;		/* => 0.5 MB            */
 
-		case (CFG_FLASH_WORD_SIZE) AMD_ID_LV800T:
+		case (CONFIG_SYS_FLASH_WORD_SIZE) AMD_ID_LV800T:
 			info->flash_id += FLASH_AM800T;
 			info->sector_count = 19;
 			info->size = 0x00100000;
 			break;		/* => 1 MB              */
 
-		case (CFG_FLASH_WORD_SIZE) AMD_ID_LV800B:
+		case (CONFIG_SYS_FLASH_WORD_SIZE) AMD_ID_LV800B:
 			info->flash_id += FLASH_AM800B;
 			info->sector_count = 19;
 			info->size = 0x00100000;
 			break;		/* => 1 MB              */
 
-		case (CFG_FLASH_WORD_SIZE) AMD_ID_LV160T:
+		case (CONFIG_SYS_FLASH_WORD_SIZE) AMD_ID_LV160T:
 			info->flash_id += FLASH_AM160T;
 			info->sector_count = 35;
 			info->size = 0x00200000;
 			break;		/* => 2 MB              */
 
-		case (CFG_FLASH_WORD_SIZE) AMD_ID_LV160B:
+		case (CONFIG_SYS_FLASH_WORD_SIZE) AMD_ID_LV160B:
 			info->flash_id += FLASH_AM160B;
 			info->sector_count = 35;
 			info->size = 0x00200000;
@@ -357,14 +357,14 @@ static ulong flash_get_size(vu_long * addr, flash_info_t * info)
 	for (i = 0; i < info->sector_count; i++) {
 		/* read sector protection at sector address, (A7 .. A0) = 0x02 */
 		/* D0 = 1 if protected */
-		addr2 = (volatile CFG_FLASH_WORD_SIZE *)(info->start[i]);
+		addr2 = (volatile CONFIG_SYS_FLASH_WORD_SIZE *)(info->start[i]);
 
 		/* For AMD29033C flash we need to resend the command of *
 		 * reading flash protection for upper 8 Mb of flash     */
 		if (i == 32) {
-			addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0xAAAAAAAA;
-			addr2[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x55555555;
-			addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x90909090;
+			addr2[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0xAAAAAAAA;
+			addr2[CONFIG_SYS_FLASH_ADDR1] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x55555555;
+			addr2[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x90909090;
 		}
 
 		if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST)
@@ -374,7 +374,7 @@ static ulong flash_get_size(vu_long * addr, flash_info_t * info)
 	}
 
 	/* issue bank reset to return to read mode */
-	addr2[0] = (CFG_FLASH_WORD_SIZE) 0x00F000F0;
+	addr2[0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00F000F0;
 
 	return (info->size);
 }
@@ -382,14 +382,14 @@ static ulong flash_get_size(vu_long * addr, flash_info_t * info)
 static int wait_for_DQ7_1(flash_info_t * info, int sect)
 {
 	ulong start, now, last;
-	volatile CFG_FLASH_WORD_SIZE *addr =
-		(CFG_FLASH_WORD_SIZE *) (info->start[sect]);
+	volatile CONFIG_SYS_FLASH_WORD_SIZE *addr =
+		(CONFIG_SYS_FLASH_WORD_SIZE *) (info->start[sect]);
 
 	start = get_timer(0);
 	last = start;
-	while ((addr[0] & (CFG_FLASH_WORD_SIZE) 0x00800080) !=
-			(CFG_FLASH_WORD_SIZE) 0x00800080) {
-		if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+	while ((addr[0] & (CONFIG_SYS_FLASH_WORD_SIZE) 0x00800080) !=
+			(CONFIG_SYS_FLASH_WORD_SIZE) 0x00800080) {
+		if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
 			printf("Timeout\n");
 			return -1;
 		}
@@ -402,7 +402,7 @@ static int wait_for_DQ7_1(flash_info_t * info, int sect)
 	return 0;
 }
 
-#ifdef CFG_FLASH_2ND_16BIT_DEV
+#ifdef CONFIG_SYS_FLASH_2ND_16BIT_DEV
 int flash_erase(flash_info_t * info, int s_first, int s_last)
 {
 	if (((info->flash_id & FLASH_TYPEMASK) == FLASH_AM320B) ||
@@ -420,8 +420,8 @@ static int flash_erase_1(flash_info_t * info, int s_first, int s_last)
 int flash_erase(flash_info_t * info, int s_first, int s_last)
 #endif
 {
-	volatile CFG_FLASH_WORD_SIZE *addr = (CFG_FLASH_WORD_SIZE *) (info->start[0]);
-	volatile CFG_FLASH_WORD_SIZE *addr2;
+	volatile CONFIG_SYS_FLASH_WORD_SIZE *addr = (CONFIG_SYS_FLASH_WORD_SIZE *) (info->start[0]);
+	volatile CONFIG_SYS_FLASH_WORD_SIZE *addr2;
 	int flag, prot, sect, l_sect;
 	int i;
 
@@ -457,24 +457,24 @@ int flash_erase(flash_info_t * info, int s_first, int s_last)
 	/* Start erase on unprotected sectors */
 	for (sect = s_first; sect <= s_last; sect++) {
 		if (info->protect[sect] == 0) {	/* not protected */
-			addr2 = (CFG_FLASH_WORD_SIZE *) (info->start[sect]);
+			addr2 = (CONFIG_SYS_FLASH_WORD_SIZE *) (info->start[sect]);
 
 			if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) {
-				addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00AA00AA;
-				addr[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x00550055;
-				addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00800080;
-				addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00AA00AA;
-				addr[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x00550055;
-				addr2[0] = (CFG_FLASH_WORD_SIZE) 0x00500050;	/* block erase */
+				addr[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00AA00AA;
+				addr[CONFIG_SYS_FLASH_ADDR1] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00550055;
+				addr[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00800080;
+				addr[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00AA00AA;
+				addr[CONFIG_SYS_FLASH_ADDR1] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00550055;
+				addr2[0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00500050;	/* block erase */
 				for (i = 0; i < 50; i++)
 					udelay(1000);	/* wait 1 ms */
 			} else {
-				addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00AA00AA;
-				addr[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x00550055;
-				addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00800080;
-				addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00AA00AA;
-				addr[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x00550055;
-				addr2[0] = (CFG_FLASH_WORD_SIZE) 0x00300030;	/* sector erase */
+				addr[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00AA00AA;
+				addr[CONFIG_SYS_FLASH_ADDR1] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00550055;
+				addr[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00800080;
+				addr[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00AA00AA;
+				addr[CONFIG_SYS_FLASH_ADDR1] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00550055;
+				addr2[0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00300030;	/* sector erase */
 			}
 			l_sect = sect;
 			/*
@@ -496,8 +496,8 @@ int flash_erase(flash_info_t * info, int s_first, int s_last)
 	udelay(1000);
 
 	/* reset to read mode */
-	addr = (CFG_FLASH_WORD_SIZE *) info->start[0];
-	addr[0] = (CFG_FLASH_WORD_SIZE) 0x00F000F0;	/* reset bank */
+	addr = (CONFIG_SYS_FLASH_WORD_SIZE *) info->start[0];
+	addr[0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00F000F0;	/* reset bank */
 
 	printf(" done\n");
 	return 0;
@@ -577,7 +577,7 @@ int write_buff(flash_info_t * info, uchar * src, ulong addr, ulong cnt)
  * 1 - write timeout
  * 2 - Flash not erased
  */
-#ifdef CFG_FLASH_2ND_16BIT_DEV
+#ifdef CONFIG_SYS_FLASH_2ND_16BIT_DEV
 static int write_word(flash_info_t * info, ulong dest, ulong data)
 {
 	if (((info->flash_id & FLASH_TYPEMASK) == FLASH_AM320B) ||
@@ -595,9 +595,9 @@ static int write_word_1(flash_info_t * info, ulong dest, ulong data)
 static int write_word(flash_info_t * info, ulong dest, ulong data)
 #endif
 {
-	volatile CFG_FLASH_WORD_SIZE *addr2 = (CFG_FLASH_WORD_SIZE *) (info->start[0]);
-	volatile CFG_FLASH_WORD_SIZE *dest2 = (CFG_FLASH_WORD_SIZE *) dest;
-	volatile CFG_FLASH_WORD_SIZE *data2 = (CFG_FLASH_WORD_SIZE *) & data;
+	volatile CONFIG_SYS_FLASH_WORD_SIZE *addr2 = (CONFIG_SYS_FLASH_WORD_SIZE *) (info->start[0]);
+	volatile CONFIG_SYS_FLASH_WORD_SIZE *dest2 = (CONFIG_SYS_FLASH_WORD_SIZE *) dest;
+	volatile CONFIG_SYS_FLASH_WORD_SIZE *data2 = (CONFIG_SYS_FLASH_WORD_SIZE *) & data;
 	ulong start;
 	int i, flag;
 
@@ -605,13 +605,13 @@ static int write_word(flash_info_t * info, ulong dest, ulong data)
 	if ((*((vu_long *)dest) & data) != data)
 		return (2);
 
-	for (i = 0; i < 4 / sizeof(CFG_FLASH_WORD_SIZE); i++) {
+	for (i = 0; i < 4 / sizeof(CONFIG_SYS_FLASH_WORD_SIZE); i++) {
 		/* Disable interrupts which might cause a timeout here */
 		flag = disable_interrupts();
 
-		addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00AA00AA;
-		addr2[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x00550055;
-		addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00A000A0;
+		addr2[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00AA00AA;
+		addr2[CONFIG_SYS_FLASH_ADDR1] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00550055;
+		addr2[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00A000A0;
 
 		dest2[i] = data2[i];
 
@@ -621,10 +621,10 @@ static int write_word(flash_info_t * info, ulong dest, ulong data)
 
 		/* data polling for D7 */
 		start = get_timer(0);
-		while ((dest2[i] & (CFG_FLASH_WORD_SIZE) 0x00800080) !=
-				(data2[i] & (CFG_FLASH_WORD_SIZE) 0x00800080)) {
+		while ((dest2[i] & (CONFIG_SYS_FLASH_WORD_SIZE) 0x00800080) !=
+				(data2[i] & (CONFIG_SYS_FLASH_WORD_SIZE) 0x00800080)) {
 
-			if (get_timer(start) > CFG_FLASH_WRITE_TOUT)
+			if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT)
 				return (1);
 		}
 	}
@@ -632,10 +632,10 @@ static int write_word(flash_info_t * info, ulong dest, ulong data)
 	return (0);
 }
 
-#ifdef CFG_FLASH_2ND_16BIT_DEV
+#ifdef CONFIG_SYS_FLASH_2ND_16BIT_DEV
 
-#undef  CFG_FLASH_WORD_SIZE
-#define CFG_FLASH_WORD_SIZE unsigned short
+#undef  CONFIG_SYS_FLASH_WORD_SIZE
+#define CONFIG_SYS_FLASH_WORD_SIZE unsigned short
 
 /*
  * The following code cannot be run from FLASH!
@@ -644,37 +644,37 @@ static ulong flash_get_size_2(vu_long * addr, flash_info_t * info)
 {
 	short i;
 	int n;
-	CFG_FLASH_WORD_SIZE value;
+	CONFIG_SYS_FLASH_WORD_SIZE value;
 	ulong base = (ulong) addr;
-	volatile CFG_FLASH_WORD_SIZE *addr2 = (CFG_FLASH_WORD_SIZE *) addr;
+	volatile CONFIG_SYS_FLASH_WORD_SIZE *addr2 = (CONFIG_SYS_FLASH_WORD_SIZE *) addr;
 
 	DEBUGF("FLASH ADDR: %08x\n", (unsigned)addr);
 
 	/* issue bank reset to return to read mode */
-	addr2[0] = (CFG_FLASH_WORD_SIZE) 0x00F000F0;
+	addr2[0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00F000F0;
 	/* Write auto select command: read Manufacturer ID */
-	addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00AA00AA;
-	addr2[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x00550055;
-	addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00900090;
+	addr2[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00AA00AA;
+	addr2[CONFIG_SYS_FLASH_ADDR1] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00550055;
+	addr2[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00900090;
 	udelay(1000);
 
 	value = addr2[0];
 	DEBUGF("FLASH MANUFACT: %x\n", value);
 
 	switch (value) {
-		case (CFG_FLASH_WORD_SIZE) AMD_MANUFACT:
+		case (CONFIG_SYS_FLASH_WORD_SIZE) AMD_MANUFACT:
 			info->flash_id = FLASH_MAN_AMD;
 			break;
-		case (CFG_FLASH_WORD_SIZE) FUJ_MANUFACT:
+		case (CONFIG_SYS_FLASH_WORD_SIZE) FUJ_MANUFACT:
 			info->flash_id = FLASH_MAN_FUJ;
 			break;
-		case (CFG_FLASH_WORD_SIZE) SST_MANUFACT:
+		case (CONFIG_SYS_FLASH_WORD_SIZE) SST_MANUFACT:
 			info->flash_id = FLASH_MAN_SST;
 			break;
-		case (CFG_FLASH_WORD_SIZE) STM_MANUFACT:
+		case (CONFIG_SYS_FLASH_WORD_SIZE) STM_MANUFACT:
 			info->flash_id = FLASH_MAN_STM;
 			break;
-		case (CFG_FLASH_WORD_SIZE) MX_MANUFACT:
+		case (CONFIG_SYS_FLASH_WORD_SIZE) MX_MANUFACT:
 			info->flash_id = FLASH_MAN_MX;
 			break;
 		default:
@@ -688,22 +688,22 @@ static ulong flash_get_size_2(vu_long * addr, flash_info_t * info)
 	DEBUGF("\nFLASH DEVICEID: %x\n", value);
 
 	switch (value) {
-		case (CFG_FLASH_WORD_SIZE)AMD_ID_LV320T:
+		case (CONFIG_SYS_FLASH_WORD_SIZE)AMD_ID_LV320T:
 			info->flash_id += FLASH_AM320T;
 			info->sector_count = 71;
 			info->size = 0x00400000;
 			break;	/* => 4 MB	*/
-		case (CFG_FLASH_WORD_SIZE)AMD_ID_LV320B:
+		case (CONFIG_SYS_FLASH_WORD_SIZE)AMD_ID_LV320B:
 			info->flash_id += FLASH_AM320B;
 			info->sector_count = 71;
 			info->size = 0x00400000;
 			break;	/* => 4 MB	*/
-		case (CFG_FLASH_WORD_SIZE)STM_ID_29W320DT:
+		case (CONFIG_SYS_FLASH_WORD_SIZE)STM_ID_29W320DT:
 			info->flash_id += FLASH_STMW320DT;
 			info->sector_count = 67;
 			info->size = 0x00400000;
 			break;	/* => 4 MB	*/
-		case (CFG_FLASH_WORD_SIZE)MX_ID_LV320T:
+		case (CONFIG_SYS_FLASH_WORD_SIZE)MX_ID_LV320T:
 			info->flash_id += FLASH_MXLV320T;
 			info->sector_count = 71;
 			info->size = 0x00400000;
@@ -782,14 +782,14 @@ static ulong flash_get_size_2(vu_long * addr, flash_info_t * info)
 	for (i = 0; i < info->sector_count; i++) {
 		/* read sector protection at sector address, (A7 .. A0) = 0x02 */
 		/* D0 = 1 if protected */
-		addr2 = (volatile CFG_FLASH_WORD_SIZE *)(info->start[i]);
+		addr2 = (volatile CONFIG_SYS_FLASH_WORD_SIZE *)(info->start[i]);
 
 		/* For AMD29033C flash we need to resend the command of *
 		 * reading flash protection for upper 8 Mb of flash     */
 		if (i == 32) {
-			addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0xAAAAAAAA;
-			addr2[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x55555555;
-			addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x90909090;
+			addr2[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0xAAAAAAAA;
+			addr2[CONFIG_SYS_FLASH_ADDR1] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x55555555;
+			addr2[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x90909090;
 		}
 
 		if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST)
@@ -799,7 +799,7 @@ static ulong flash_get_size_2(vu_long * addr, flash_info_t * info)
 	}
 
 	/* issue bank reset to return to read mode */
-	addr2[0] = (CFG_FLASH_WORD_SIZE) 0x00F000F0;
+	addr2[0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00F000F0;
 
 	return (info->size);
 }
@@ -807,14 +807,14 @@ static ulong flash_get_size_2(vu_long * addr, flash_info_t * info)
 static int wait_for_DQ7_2(flash_info_t * info, int sect)
 {
 	ulong start, now, last;
-	volatile CFG_FLASH_WORD_SIZE *addr =
-		(CFG_FLASH_WORD_SIZE *) (info->start[sect]);
+	volatile CONFIG_SYS_FLASH_WORD_SIZE *addr =
+		(CONFIG_SYS_FLASH_WORD_SIZE *) (info->start[sect]);
 
 	start = get_timer(0);
 	last = start;
-	while ((addr[0] & (CFG_FLASH_WORD_SIZE) 0x00800080) !=
-			(CFG_FLASH_WORD_SIZE) 0x00800080) {
-		if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+	while ((addr[0] & (CONFIG_SYS_FLASH_WORD_SIZE) 0x00800080) !=
+			(CONFIG_SYS_FLASH_WORD_SIZE) 0x00800080) {
+		if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
 			printf("Timeout\n");
 			return -1;
 		}
@@ -829,8 +829,8 @@ static int wait_for_DQ7_2(flash_info_t * info, int sect)
 
 static int flash_erase_2(flash_info_t * info, int s_first, int s_last)
 {
-	volatile CFG_FLASH_WORD_SIZE *addr = (CFG_FLASH_WORD_SIZE *) (info->start[0]);
-	volatile CFG_FLASH_WORD_SIZE *addr2;
+	volatile CONFIG_SYS_FLASH_WORD_SIZE *addr = (CONFIG_SYS_FLASH_WORD_SIZE *) (info->start[0]);
+	volatile CONFIG_SYS_FLASH_WORD_SIZE *addr2;
 	int flag, prot, sect, l_sect;
 	int i;
 
@@ -866,24 +866,24 @@ static int flash_erase_2(flash_info_t * info, int s_first, int s_last)
 	/* Start erase on unprotected sectors */
 	for (sect = s_first; sect <= s_last; sect++) {
 		if (info->protect[sect] == 0) {	/* not protected */
-			addr2 = (CFG_FLASH_WORD_SIZE *) (info->start[sect]);
+			addr2 = (CONFIG_SYS_FLASH_WORD_SIZE *) (info->start[sect]);
 
 			if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) {
-				addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00AA00AA;
-				addr[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x00550055;
-				addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00800080;
-				addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00AA00AA;
-				addr[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x00550055;
-				addr2[0] = (CFG_FLASH_WORD_SIZE) 0x00500050;	/* block erase */
+				addr[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00AA00AA;
+				addr[CONFIG_SYS_FLASH_ADDR1] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00550055;
+				addr[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00800080;
+				addr[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00AA00AA;
+				addr[CONFIG_SYS_FLASH_ADDR1] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00550055;
+				addr2[0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00500050;	/* block erase */
 				for (i = 0; i < 50; i++)
 					udelay(1000);	/* wait 1 ms */
 			} else {
-				addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00AA00AA;
-				addr[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x00550055;
-				addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00800080;
-				addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00AA00AA;
-				addr[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x00550055;
-				addr2[0] = (CFG_FLASH_WORD_SIZE) 0x00300030;	/* sector erase */
+				addr[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00AA00AA;
+				addr[CONFIG_SYS_FLASH_ADDR1] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00550055;
+				addr[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00800080;
+				addr[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00AA00AA;
+				addr[CONFIG_SYS_FLASH_ADDR1] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00550055;
+				addr2[0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00300030;	/* sector erase */
 			}
 			l_sect = sect;
 			/*
@@ -905,8 +905,8 @@ static int flash_erase_2(flash_info_t * info, int s_first, int s_last)
 	udelay(1000);
 
 	/* reset to read mode */
-	addr = (CFG_FLASH_WORD_SIZE *) info->start[0];
-	addr[0] = (CFG_FLASH_WORD_SIZE) 0x00F000F0;	/* reset bank */
+	addr = (CONFIG_SYS_FLASH_WORD_SIZE *) info->start[0];
+	addr[0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00F000F0;	/* reset bank */
 
 	printf(" done\n");
 	return 0;
@@ -914,9 +914,9 @@ static int flash_erase_2(flash_info_t * info, int s_first, int s_last)
 
 static int write_word_2(flash_info_t * info, ulong dest, ulong data)
 {
-	volatile CFG_FLASH_WORD_SIZE *addr2 = (CFG_FLASH_WORD_SIZE *) (info->start[0]);
-	volatile CFG_FLASH_WORD_SIZE *dest2 = (CFG_FLASH_WORD_SIZE *) dest;
-	volatile CFG_FLASH_WORD_SIZE *data2 = (CFG_FLASH_WORD_SIZE *) & data;
+	volatile CONFIG_SYS_FLASH_WORD_SIZE *addr2 = (CONFIG_SYS_FLASH_WORD_SIZE *) (info->start[0]);
+	volatile CONFIG_SYS_FLASH_WORD_SIZE *dest2 = (CONFIG_SYS_FLASH_WORD_SIZE *) dest;
+	volatile CONFIG_SYS_FLASH_WORD_SIZE *data2 = (CONFIG_SYS_FLASH_WORD_SIZE *) & data;
 	ulong start;
 	int i;
 
@@ -924,15 +924,15 @@ static int write_word_2(flash_info_t * info, ulong dest, ulong data)
 	if ((*((vu_long *)dest) & data) != data)
 		return (2);
 
-	for (i = 0; i < 4 / sizeof(CFG_FLASH_WORD_SIZE); i++) {
+	for (i = 0; i < 4 / sizeof(CONFIG_SYS_FLASH_WORD_SIZE); i++) {
 		int flag;
 
 		/* Disable interrupts which might cause a timeout here */
 		flag = disable_interrupts();
 
-		addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00AA00AA;
-		addr2[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x00550055;
-		addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00A000A0;
+		addr2[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00AA00AA;
+		addr2[CONFIG_SYS_FLASH_ADDR1] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00550055;
+		addr2[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00A000A0;
 
 		dest2[i] = data2[i];
 
@@ -942,17 +942,17 @@ static int write_word_2(flash_info_t * info, ulong dest, ulong data)
 
 		/* data polling for D7 */
 		start = get_timer(0);
-		while ((dest2[i] & (CFG_FLASH_WORD_SIZE) 0x00800080) !=
-				(data2[i] & (CFG_FLASH_WORD_SIZE) 0x00800080)) {
+		while ((dest2[i] & (CONFIG_SYS_FLASH_WORD_SIZE) 0x00800080) !=
+				(data2[i] & (CONFIG_SYS_FLASH_WORD_SIZE) 0x00800080)) {
 
-			if (get_timer(start) > CFG_FLASH_WRITE_TOUT)
+			if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT)
 				return (1);
 		}
 	}
 
 	return (0);
 }
-#endif /* CFG_FLASH_2ND_16BIT_DEV */
+#endif /* CONFIG_SYS_FLASH_2ND_16BIT_DEV */
 
 /*-----------------------------------------------------------------------
  * Functions
@@ -966,7 +966,7 @@ static int write_word(flash_info_t * info, ulong dest, ulong data);
 unsigned long flash_init(void)
 {
 	unsigned long total_b = 0;
-	unsigned long size_b[CFG_MAX_FLASH_BANKS];
+	unsigned long size_b[CONFIG_SYS_MAX_FLASH_BANKS];
 	unsigned short index = 0;
 	int i;
 	unsigned long val;
@@ -1011,7 +1011,7 @@ unsigned long flash_init(void)
 	DEBUGF("FLASH: Index: %d\n", index);
 
 	/* Init: no FLASHes known */
-	for (i = 0; i < CFG_MAX_FLASH_BANKS; ++i) {
+	for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
 		flash_info[i].flash_id = FLASH_UNKNOWN;
 		flash_info[i].sector_count = -1;
 		flash_info[i].size = 0;
@@ -1034,16 +1034,16 @@ unsigned long flash_init(void)
 		}
 
 		/* Monitor protection ON by default */
-		(void)flash_protect(FLAG_PROTECT_SET, CFG_MONITOR_BASE,
-				    CFG_MONITOR_BASE + CFG_MONITOR_LEN - 1,
+		(void)flash_protect(FLAG_PROTECT_SET, CONFIG_SYS_MONITOR_BASE,
+				    CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN - 1,
 				    &flash_info[i]);
-#if defined(CFG_ENV_IS_IN_FLASH)
-		(void)flash_protect(FLAG_PROTECT_SET, CFG_ENV_ADDR,
-				    CFG_ENV_ADDR + CFG_ENV_SECT_SIZE - 1,
+#if defined(CONFIG_ENV_IS_IN_FLASH)
+		(void)flash_protect(FLAG_PROTECT_SET, CONFIG_ENV_ADDR,
+				    CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE - 1,
 				    &flash_info[i]);
-#if defined(CFG_ENV_ADDR_REDUND)
-		(void)flash_protect(FLAG_PROTECT_SET, CFG_ENV_ADDR_REDUND,
-				    CFG_ENV_ADDR_REDUND + CFG_ENV_SECT_SIZE - 1,
+#if defined(CONFIG_ENV_ADDR_REDUND)
+		(void)flash_protect(FLAG_PROTECT_SET, CONFIG_ENV_ADDR_REDUND,
+				    CONFIG_ENV_ADDR_REDUND + CONFIG_ENV_SECT_SIZE - 1,
 				    &flash_info[i]);
 #endif
 #endif
diff --git a/board/amcc/yucca/init.S b/board/amcc/yucca/init.S
index 67e8f8f3a..9308fdac2 100644
--- a/board/amcc/yucca/init.S
+++ b/board/amcc/yucca/init.S
@@ -59,23 +59,23 @@ tlbtabA:
 	 * routine.
 	 */
 
-	tlbentry(CFG_ISRAM_BASE, SZ_256K, 0x00000000, 4, AC_R|AC_W|AC_X|SA_I)
-	tlbentry(CFG_FPGA_BASE, SZ_1K, 0xE2000000, 4,AC_R|AC_W|SA_I)
-
-	tlbentry(CFG_OPER_FLASH, SZ_16M, 0xE7000000, 4,AC_R|AC_W|AC_X|SA_G|SA_I)
-	tlbentry(CFG_PERIPHERAL_BASE, SZ_4K, 0xF0000000, 4, AC_R|AC_W|SA_G|SA_I)
-
-	tlbentry(CFG_PCI_BASE, SZ_256M, 0x00000000, 0xC, AC_R|AC_W|SA_G|SA_I)
-	tlbentry(CFG_PCI_MEMBASE, SZ_256M, 0x10000000, 0xC, AC_R|AC_W|SA_G|SA_I)
-	tlbentry(CFG_PCIE_MEMBASE, SZ_256M, 0xB0000000, 0xD, AC_R|AC_W|SA_G|SA_I)
-	tlbentry(CFG_PCIE_BASE, SZ_16K, 0x20000000, 0xC, AC_R|AC_W|SA_G|SA_I)
-
-	tlbentry(CFG_PCIE0_CFGBASE, SZ_16M, 0x40000000, 0xC, AC_R|AC_W|SA_G|SA_I)
-	tlbentry(CFG_PCIE1_CFGBASE, SZ_16M, 0x80000000, 0xC, AC_R|AC_W|SA_G|SA_I)
-	tlbentry(CFG_PCIE2_CFGBASE, SZ_16M, 0xC0000000, 0xC, AC_R|AC_W|SA_G|SA_I)
-	tlbentry(CFG_PCIE0_XCFGBASE, SZ_1K, 0x50000000, 0xC, AC_R|AC_W|SA_G|SA_I)
-	tlbentry(CFG_PCIE1_XCFGBASE, SZ_1K, 0x90000000, 0xC, AC_R|AC_W|SA_G|SA_I)
-	tlbentry(CFG_PCIE2_XCFGBASE, SZ_1K, 0xD0000000, 0xC, AC_R|AC_W|SA_G|SA_I)
+	tlbentry(CONFIG_SYS_ISRAM_BASE, SZ_256K, 0x00000000, 4, AC_R|AC_W|AC_X|SA_I)
+	tlbentry(CONFIG_SYS_FPGA_BASE, SZ_1K, 0xE2000000, 4,AC_R|AC_W|SA_I)
+
+	tlbentry(CONFIG_SYS_OPER_FLASH, SZ_16M, 0xE7000000, 4,AC_R|AC_W|AC_X|SA_G|SA_I)
+	tlbentry(CONFIG_SYS_PERIPHERAL_BASE, SZ_4K, 0xF0000000, 4, AC_R|AC_W|SA_G|SA_I)
+
+	tlbentry(CONFIG_SYS_PCI_BASE, SZ_256M, 0x00000000, 0xC, AC_R|AC_W|SA_G|SA_I)
+	tlbentry(CONFIG_SYS_PCI_MEMBASE, SZ_256M, 0x10000000, 0xC, AC_R|AC_W|SA_G|SA_I)
+	tlbentry(CONFIG_SYS_PCIE_MEMBASE, SZ_256M, 0xB0000000, 0xD, AC_R|AC_W|SA_G|SA_I)
+	tlbentry(CONFIG_SYS_PCIE_BASE, SZ_16K, 0x20000000, 0xC, AC_R|AC_W|SA_G|SA_I)
+
+	tlbentry(CONFIG_SYS_PCIE0_CFGBASE, SZ_16M, 0x40000000, 0xC, AC_R|AC_W|SA_G|SA_I)
+	tlbentry(CONFIG_SYS_PCIE1_CFGBASE, SZ_16M, 0x80000000, 0xC, AC_R|AC_W|SA_G|SA_I)
+	tlbentry(CONFIG_SYS_PCIE2_CFGBASE, SZ_16M, 0xC0000000, 0xC, AC_R|AC_W|SA_G|SA_I)
+	tlbentry(CONFIG_SYS_PCIE0_XCFGBASE, SZ_1K, 0x50000000, 0xC, AC_R|AC_W|SA_G|SA_I)
+	tlbentry(CONFIG_SYS_PCIE1_XCFGBASE, SZ_1K, 0x90000000, 0xC, AC_R|AC_W|SA_G|SA_I)
+	tlbentry(CONFIG_SYS_PCIE2_XCFGBASE, SZ_1K, 0xD0000000, 0xC, AC_R|AC_W|SA_G|SA_I)
 	tlbtab_end
 
 /**************************************************************************
@@ -102,20 +102,20 @@ tlbtabB:
 	 * routine.
 	 */
 
-	tlbentry(CFG_ISRAM_BASE, SZ_256K, 0x00000000, 4, AC_R|AC_W|AC_X|SA_I)
-	tlbentry(CFG_FPGA_BASE, SZ_1K, 0xE2000000, 4,AC_R|AC_W|SA_I)
+	tlbentry(CONFIG_SYS_ISRAM_BASE, SZ_256K, 0x00000000, 4, AC_R|AC_W|AC_X|SA_I)
+	tlbentry(CONFIG_SYS_FPGA_BASE, SZ_1K, 0xE2000000, 4,AC_R|AC_W|SA_I)
 
-	tlbentry(CFG_OPER_FLASH, SZ_16M, 0xE7000000, 4,AC_R|AC_W|AC_X|SA_G|SA_I)
-	tlbentry(CFG_PERIPHERAL_BASE, SZ_4K, 0xF0000000, 4, AC_R|AC_W|SA_G|SA_I)
+	tlbentry(CONFIG_SYS_OPER_FLASH, SZ_16M, 0xE7000000, 4,AC_R|AC_W|AC_X|SA_G|SA_I)
+	tlbentry(CONFIG_SYS_PERIPHERAL_BASE, SZ_4K, 0xF0000000, 4, AC_R|AC_W|SA_G|SA_I)
 
-	tlbentry(CFG_PCI_BASE, SZ_256M, 0x00000000, 0xC, AC_R|AC_W|SA_G|SA_I)
-	tlbentry(CFG_PCI_MEMBASE, SZ_256M, 0x10000000, 0xC, AC_R|AC_W|SA_G|SA_I)
-	tlbentry(CFG_PCIE_MEMBASE, SZ_256M, 0xB0000000, 0xD, AC_R|AC_W|SA_G|SA_I)
+	tlbentry(CONFIG_SYS_PCI_BASE, SZ_256M, 0x00000000, 0xC, AC_R|AC_W|SA_G|SA_I)
+	tlbentry(CONFIG_SYS_PCI_MEMBASE, SZ_256M, 0x10000000, 0xC, AC_R|AC_W|SA_G|SA_I)
+	tlbentry(CONFIG_SYS_PCIE_MEMBASE, SZ_256M, 0xB0000000, 0xD, AC_R|AC_W|SA_G|SA_I)
 
-	tlbentry(CFG_PCIE0_CFGBASE, SZ_16M, 0x00000000, 0xD, AC_R|AC_W|SA_G|SA_I)
-	tlbentry(CFG_PCIE1_CFGBASE, SZ_16M, 0x20000000, 0xD, AC_R|AC_W|SA_G|SA_I)
-	tlbentry(CFG_PCIE2_CFGBASE, SZ_16M, 0x40000000, 0xD, AC_R|AC_W|SA_G|SA_I)
-	tlbentry(CFG_PCIE0_XCFGBASE, SZ_1K, 0x10000000, 0xD, AC_R|AC_W|SA_G|SA_I)
-	tlbentry(CFG_PCIE1_XCFGBASE, SZ_1K, 0x30000000, 0xD, AC_R|AC_W|SA_G|SA_I)
-	tlbentry(CFG_PCIE2_XCFGBASE, SZ_1K, 0x50000000, 0xD, AC_R|AC_W|SA_G|SA_I)
+	tlbentry(CONFIG_SYS_PCIE0_CFGBASE, SZ_16M, 0x00000000, 0xD, AC_R|AC_W|SA_G|SA_I)
+	tlbentry(CONFIG_SYS_PCIE1_CFGBASE, SZ_16M, 0x20000000, 0xD, AC_R|AC_W|SA_G|SA_I)
+	tlbentry(CONFIG_SYS_PCIE2_CFGBASE, SZ_16M, 0x40000000, 0xD, AC_R|AC_W|SA_G|SA_I)
+	tlbentry(CONFIG_SYS_PCIE0_XCFGBASE, SZ_1K, 0x10000000, 0xD, AC_R|AC_W|SA_G|SA_I)
+	tlbentry(CONFIG_SYS_PCIE1_XCFGBASE, SZ_1K, 0x30000000, 0xD, AC_R|AC_W|SA_G|SA_I)
+	tlbentry(CONFIG_SYS_PCIE2_XCFGBASE, SZ_1K, 0x50000000, 0xD, AC_R|AC_W|SA_G|SA_I)
 	tlbtab_end
diff --git a/board/amcc/yucca/u-boot.lds b/board/amcc/yucca/u-boot.lds
index 4477cd8a8..adfa28b0e 100644
--- a/board/amcc/yucca/u-boot.lds
+++ b/board/amcc/yucca/u-boot.lds
@@ -137,6 +137,7 @@ SECTIONS
    *(.dynbss)
    *(.bss)
    *(COMMON)
+   . = ALIGN(4);
   }
   _end = . ;
   PROVIDE (end = .);
diff --git a/board/amcc/yucca/yucca.c b/board/amcc/yucca/yucca.c
index 84c3938d7..c8055689f 100644
--- a/board/amcc/yucca/yucca.c
+++ b/board/amcc/yucca/yucca.c
@@ -28,6 +28,7 @@
 #include <common.h>
 #include <ppc4xx.h>
 #include <i2c.h>
+#include <netdev.h>
 #include <asm/processor.h>
 #include <asm/io.h>
 #include <asm/4xx_pcie.h>
@@ -625,7 +626,7 @@ int pci_pre_init(struct pci_controller * hose )
  *	may not be sufficient for a given board.
  *
  ************************************************************************/
-#if defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT)
+#if defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT)
 void pci_target_init(struct pci_controller * hose )
 {
 	/*-------------------------------------------------------------------+
@@ -640,7 +641,7 @@ void pci_target_init(struct pci_controller * hose )
 	 * Map all of SDRAM to PCI address 0x0000_0000. Note that the 440
 	 * strapping options to not support sizes such as 128/256 MB.
 	 *-------------------------------------------------------------------*/
-	out32r( PCIX0_PIM0LAL, CFG_SDRAM_BASE );
+	out32r( PCIX0_PIM0LAL, CONFIG_SYS_SDRAM_BASE );
 	out32r( PCIX0_PIM0LAH, 0 );
 	out32r( PCIX0_PIM0SA, ~(gd->ram_size - 1) | 1 );
 	out32r( PCIX0_BAR0, 0 );
@@ -648,12 +649,12 @@ void pci_target_init(struct pci_controller * hose )
 	/*-------------------------------------------------------------------+
 	 * Program the board's subsystem id/vendor id
 	 *-------------------------------------------------------------------*/
-	out16r( PCIX0_SBSYSVID, CFG_PCI_SUBSYS_VENDORID );
-	out16r( PCIX0_SBSYSID, CFG_PCI_SUBSYS_DEVICEID );
+	out16r( PCIX0_SBSYSVID, CONFIG_SYS_PCI_SUBSYS_VENDORID );
+	out16r( PCIX0_SBSYSID, CONFIG_SYS_PCI_SUBSYS_DEVICEID );
 
 	out16r( PCIX0_CMD, in16r(PCIX0_CMD) | PCI_COMMAND_MEMORY );
 }
-#endif	/* defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT) */
+#endif	/* defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT) */
 
 #if defined(CONFIG_PCI)
 /*************************************************************************
@@ -842,9 +843,9 @@ void pcie_setup_hoses(int busno)
 
 		/* setup mem resource */
 		pci_set_region(hose->regions + 0,
-			CFG_PCIE_MEMBASE + i * CFG_PCIE_MEMSIZE,
-			CFG_PCIE_MEMBASE + i * CFG_PCIE_MEMSIZE,
-			CFG_PCIE_MEMSIZE,
+			CONFIG_SYS_PCIE_MEMBASE + i * CONFIG_SYS_PCIE_MEMSIZE,
+			CONFIG_SYS_PCIE_MEMBASE + i * CONFIG_SYS_PCIE_MEMSIZE,
+			CONFIG_SYS_PCIE_MEMSIZE,
 			PCI_REGION_MEM);
 		hose->region_count = 1;
 		pci_register_hose(hose);
@@ -952,3 +953,8 @@ int onboard_pci_arbiter_selected(int core_pci)
 #endif
 	return (BOARD_OPTION_NOT_SELECTED);
 }
+
+int board_eth_init(bd_t *bis)
+{
+	return pci_eth_init(bis);
+}
diff --git a/board/amirix/ap1000/ap1000.c b/board/amirix/ap1000/ap1000.c
index 55277e72d..e9f80ff5c 100644
--- a/board/amirix/ap1000/ap1000.c
+++ b/board/amirix/ap1000/ap1000.c
@@ -23,6 +23,7 @@
 
 #include <common.h>
 #include <command.h>
+#include <netdev.h>
 #include <asm/processor.h>
 
 #include "powerspan.h"
@@ -697,3 +698,8 @@ U_BOOT_CMD (swrecon, 1, 0, do_swreconfig,
 	    "swrecon - trigger a board reconfigure to the software selected configuration\n",
 	    "\n"
 	    "    - trigger a board reconfigure to the software selected configuration\n");
+
+int board_eth_init(bd_t *bis)
+{
+	return pci_eth_init(bis);
+}
diff --git a/board/amirix/ap1000/flash.c b/board/amirix/ap1000/flash.c
index 1a3b25218..1e742e527 100644
--- a/board/amirix/ap1000/flash.c
+++ b/board/amirix/ap1000/flash.c
@@ -110,7 +110,7 @@ typedef union {
 
 #define NUM_ERASE_REGIONS 4
 
-flash_info_t flash_info[CFG_MAX_FLASH_BANKS];	/* info for FLASH chips    */
+flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];	/* info for FLASH chips    */
 
 /*-----------------------------------------------------------------------
  * Functions
@@ -130,7 +130,7 @@ static int flash_write_cfiword (flash_info_t * info, ulong dest,
 				cfiword_t cword);
 static int flash_full_status_check (flash_info_t * info, ulong sector,
 				    ulong tout, char *prompt);
-#ifdef CFG_FLASH_USE_BUFFER_WRITE
+#ifdef CONFIG_SYS_FLASH_USE_BUFFER_WRITE
 static int flash_write_cfibuffer (flash_info_t * info, ulong dest, uchar * cp,
 				  int len);
 #endif
@@ -270,7 +270,7 @@ unsigned long flash_init (void)
 	flash_info[0].flash_id = FLASH_UNKNOWN;
 	flash_info[0].portwidth = FLASH_CFI_16BIT;
 	flash_info[0].chipwidth = FLASH_CFI_16BIT;
-	size += flash_info[0].size = flash_get_size (CFG_PROGFLASH_BASE, 0);
+	size += flash_info[0].size = flash_get_size (CONFIG_SYS_PROGFLASH_BASE, 0);
 	if (flash_info[0].flash_id == FLASH_UNKNOWN) {
 		printf ("## Unknown FLASH on Bank %d - Size = 0x%08lx = %ld MB\n", 1, flash_info[0].size, flash_info[0].size << 20);
 	};
@@ -278,7 +278,7 @@ unsigned long flash_init (void)
 	flash_info[1].flash_id = FLASH_UNKNOWN;
 	flash_info[1].portwidth = FLASH_CFI_8BIT;
 	flash_info[1].chipwidth = FLASH_CFI_16BIT;
-	size += flash_info[1].size = flash_get_size (CFG_CONFFLASH_BASE, 1);
+	size += flash_info[1].size = flash_get_size (CONFIG_SYS_CONFFLASH_BASE, 1);
 	if (flash_info[1].flash_id == FLASH_UNKNOWN) {
 		printf ("## Unknown FLASH on Bank %d - Size = 0x%08lx = %ld MB\n", 2, flash_info[1].size, flash_info[1].size << 20);
 	};
@@ -398,7 +398,7 @@ int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
 			return rc;
 		wp = cp;
 	}
-#ifdef CFG_FLASH_USE_BUFFER_WRITE
+#ifdef CONFIG_SYS_FLASH_USE_BUFFER_WRITE
 	while (cnt >= info->portwidth) {
 		i = info->buffer_size > cnt ? cnt : info->buffer_size;
 		if ((rc = flash_write_cfibuffer (info, wp, src, i)) != ERR_OK)
@@ -419,7 +419,7 @@ int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
 		wp += info->portwidth;
 		cnt -= info->portwidth;
 	}
-#endif /* CFG_FLASH_USE_BUFFER_WRITE */
+#endif /* CONFIG_SYS_FLASH_USE_BUFFER_WRITE */
 	if (cnt == 0) {
 		return (0);
 	}
@@ -824,7 +824,7 @@ static int flash_write_cfiword (flash_info_t * info, ulong dest,
 	return flash_full_status_check (info, 0, info->write_tout, "write");
 }
 
-#ifdef CFG_FLASH_USE_BUFFER_WRITE
+#ifdef CONFIG_SYS_FLASH_USE_BUFFER_WRITE
 
 /* loop through the sectors from the highest address
  * when the passed address is greater or equal to the sector address
@@ -900,4 +900,4 @@ static int flash_write_cfibuffer (flash_info_t * info, ulong dest, uchar * cp,
 	flash_write_cmd (info, sector, 0, FLASH_CMD_CLEAR_STATUS);
 	return retcode;
 }
-#endif /* CFG_USE_FLASH_BUFFER_WRITE */
+#endif /* CONFIG_SYS_USE_FLASH_BUFFER_WRITE */
diff --git a/board/amirix/ap1000/pci.c b/board/amirix/ap1000/pci.c
index a6436ac5b..a9b3fd89f 100644
--- a/board/amirix/ap1000/pci.c
+++ b/board/amirix/ap1000/pci.c
@@ -267,10 +267,10 @@ static int psII_write_config_dword (struct pci_controller *hose,
 static struct pci_config_table ap1000_config_table[] = {
 #ifdef CONFIG_AP1000
 	{PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
-	 PCI_BUS (CFG_ETH_DEV_FN), PCI_DEV (CFG_ETH_DEV_FN),
-	 PCI_FUNC (CFG_ETH_DEV_FN),
+	 PCI_BUS (CONFIG_SYS_ETH_DEV_FN), PCI_DEV (CONFIG_SYS_ETH_DEV_FN),
+	 PCI_FUNC (CONFIG_SYS_ETH_DEV_FN),
 	 pci_cfgfunc_config_device,
-	 {CFG_ETH_IOBASE, CFG_ETH_MEMBASE,
+	 {CONFIG_SYS_ETH_IOBASE, CONFIG_SYS_ETH_MEMBASE,
 	  PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER}},
 #endif
 	{}
diff --git a/board/amirix/ap1000/serial.c b/board/amirix/ap1000/serial.c
index 508e88040..87003be9c 100644
--- a/board/amirix/ap1000/serial.c
+++ b/board/amirix/ap1000/serial.c
@@ -30,15 +30,15 @@
 DECLARE_GLOBAL_DATA_PTR;
 
 const NS16550_t COM_PORTS[] =
-	{ (NS16550_t) CFG_NS16550_COM1, (NS16550_t) CFG_NS16550_COM2 };
+	{ (NS16550_t) CONFIG_SYS_NS16550_COM1, (NS16550_t) CONFIG_SYS_NS16550_COM2 };
 
-#undef CFG_DUART_CHAN
-#define CFG_DUART_CHAN gComPort
+#undef CONFIG_SYS_DUART_CHAN
+#define CONFIG_SYS_DUART_CHAN gComPort
 static int gComPort = 0;
 
 int serial_init (void)
 {
-	int clock_divisor = CFG_NS16550_CLK / 16 / gd->baudrate;
+	int clock_divisor = CONFIG_SYS_NS16550_CLK / 16 / gd->baudrate;
 
 	(void) NS16550_init (COM_PORTS[0], clock_divisor);
 	gComPort = 0;
@@ -49,30 +49,30 @@ int serial_init (void)
 void serial_putc (const char c)
 {
 	if (c == '\n') {
-		NS16550_putc (COM_PORTS[CFG_DUART_CHAN], '\r');
+		NS16550_putc (COM_PORTS[CONFIG_SYS_DUART_CHAN], '\r');
 	}
 
-	NS16550_putc (COM_PORTS[CFG_DUART_CHAN], c);
+	NS16550_putc (COM_PORTS[CONFIG_SYS_DUART_CHAN], c);
 }
 
 int serial_getc (void)
 {
-	return NS16550_getc (COM_PORTS[CFG_DUART_CHAN]);
+	return NS16550_getc (COM_PORTS[CONFIG_SYS_DUART_CHAN]);
 }
 
 int serial_tstc (void)
 {
-	return NS16550_tstc (COM_PORTS[CFG_DUART_CHAN]);
+	return NS16550_tstc (COM_PORTS[CONFIG_SYS_DUART_CHAN]);
 }
 
 void serial_setbrg (void)
 {
-	int clock_divisor = CFG_NS16550_CLK / 16 / gd->baudrate;
+	int clock_divisor = CONFIG_SYS_NS16550_CLK / 16 / gd->baudrate;
 
-#ifdef CFG_INIT_CHAN1
+#ifdef CONFIG_SYS_INIT_CHAN1
 	NS16550_reinit (COM_PORTS[0], clock_divisor);
 #endif
-#ifdef CFG_INIT_CHAN2
+#ifdef CONFIG_SYS_INIT_CHAN2
 	NS16550_reinit (COM_PORTS[1], clock_divisor);
 #endif
 }
diff --git a/board/amirix/ap1000/u-boot.lds b/board/amirix/ap1000/u-boot.lds
index a939e0331..27a6f8b06 100644
--- a/board/amirix/ap1000/u-boot.lds
+++ b/board/amirix/ap1000/u-boot.lds
@@ -69,7 +69,7 @@ SECTIONS
     lib_generic/zlib.o		(.text)
 
 /*    . = env_offset;*/
-/*    common/environment.o(.text)*/
+/*    common/env_embedded.o(.text)*/
 
     *(.text)
     *(.fixup)
@@ -138,6 +138,7 @@ SECTIONS
    *(.dynbss)
    *(.bss)
    *(COMMON)
+   . = ALIGN(4);
   }
   _end = . ;
   PROVIDE (end = .);
diff --git a/board/apollon/Makefile b/board/apollon/Makefile
index 9bac9a6c0..f20de3c93 100644
--- a/board/apollon/Makefile
+++ b/board/apollon/Makefile
@@ -25,9 +25,10 @@ include $(TOPDIR)/config.mk
 
 LIB	= $(obj)lib$(BOARD).a
 
-COBJS	:= apollon.o mem.o sys_info.o
+COBJS-y	:= apollon.o mem.o sys_info.o
 SOBJS	:= lowlevel_init.o
 
+COBJS	:= $(COBJS-y)
 SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
 OBJS	:= $(addprefix $(obj),$(COBJS))
 SOBJS	:= $(addprefix $(obj),$(SOBJS))
diff --git a/board/apollon/apollon.c b/board/apollon/apollon.c
index 8efa70395..8964eba7f 100644
--- a/board/apollon/apollon.c
+++ b/board/apollon/apollon.c
@@ -245,7 +245,7 @@ void peripheral_enable(void)
 	__raw_writel(v, CM_CLKSEL2_CORE);
 	__raw_writel(0x1, CM_CLKSEL_WKUP);
 
-#ifdef CFG_NS16550
+#ifdef CONFIG_SYS_NS16550
 	/* Enable UART1 clock */
 	func_clks |= BIT21;
 	if_clks |= BIT21;
diff --git a/board/apollon/config.mk b/board/apollon/config.mk
index 417b954a7..2b464e787 100644
--- a/board/apollon/config.mk
+++ b/board/apollon/config.mk
@@ -13,7 +13,7 @@
 # Linux-Kernel is expected to be at 8000'8000, entry 8000'8000
 # (mem base + reserved)
 # For use with external or internal boots.
-TEXT_BASE = 0x80e80000
+TEXT_BASE = 0x83e80000
 
 # Used with full SRAM boot.
 # This is either with a GP system or a signed boot image.
diff --git a/board/apollon/lowlevel_init.S b/board/apollon/lowlevel_init.S
index 8381feae0..64550f61e 100644
--- a/board/apollon/lowlevel_init.S
+++ b/board/apollon/lowlevel_init.S
@@ -51,7 +51,7 @@ _TEXT_BASE:
 .globl lowlevel_init
 lowlevel_init:
 
-#ifdef CFG_NOR_BOOT
+#ifdef CONFIG_SYS_NOR_BOOT
 	/* Check running in SDRAM */
 	mov	r0, pc, lsr #28
 	cmp	r0, #8
diff --git a/board/apollon/mem.c b/board/apollon/mem.c
index 0211c6ad2..36bf6e922 100644
--- a/board/apollon/mem.c
+++ b/board/apollon/mem.c
@@ -146,7 +146,7 @@ void gpmc_init(void)
 	__raw_writel(0x10, GPMC_SYSCONFIG);	/* smart idle */
 	__raw_writel(0x0, GPMC_IRQENABLE);	/* isr's sources masked */
 	__raw_writel(tval, GPMC_TIMEOUT_CONTROL);	/* timeout disable */
-#ifdef CFG_NAND_BOOT
+#ifdef CONFIG_SYS_NAND_BOOT
 	/* set nWP, disable limited addr */
 	__raw_writel(0x001, GPMC_CONFIG);
 #else
@@ -164,7 +164,7 @@ void gpmc_init(void)
 	__raw_writel(0x0, GPMC_CONFIG7_0);	/* disable current map */
 	sdelay(1000);
 
-#ifdef CFG_NOR_BOOT
+#ifdef CONFIG_SYS_NOR_BOOT
 	__raw_writel(APOLLON_24XX_GPMC_CONFIG1_3, GPMC_CONFIG1_0);
 	__raw_writel(APOLLON_24XX_GPMC_CONFIG2_3, GPMC_CONFIG2_0);
 	__raw_writel(APOLLON_24XX_GPMC_CONFIG3_3, GPMC_CONFIG3_0);
@@ -208,13 +208,13 @@ void gpmc_init(void)
 	__raw_writel(APOLLON_24XX_GPMC_CONFIG4_0, GPMC_CONFIG4_2);
 	__raw_writel(APOLLON_24XX_GPMC_CONFIG5_0, GPMC_CONFIG5_2);
 	__raw_writel(APOLLON_24XX_GPMC_CONFIG6_0, GPMC_CONFIG6_2);
-#ifdef CFG_NOR_BOOT
+#ifdef CONFIG_SYS_NOR_BOOT
 	__raw_writel(APOLLON_24XX_GPMC_CONFIG7_0, GPMC_CONFIG7_2);
 #else
 	__raw_writel(APOLLON_24XX_GPMC_CONFIG7_2, GPMC_CONFIG7_2);
 #endif
 
-#ifndef CFG_NOR_BOOT
+#ifndef CONFIG_SYS_NOR_BOOT
 	/* setup cs3 */
 	__raw_writel(0, GPMC_CONFIG7_3);	/* disable any mapping */
 	sdelay(1000);
diff --git a/board/apollon/mem.h b/board/apollon/mem.h
index d4636f405..09c4ea43c 100644
--- a/board/apollon/mem.h
+++ b/board/apollon/mem.h
@@ -142,7 +142,7 @@
 #endif /* endif PRCM_CONFIG_II */
 
 #ifdef PRCM_CONFIG_III		/* L3 at 133MHz */
-# ifdef CFG_NAND_BOOT
+# ifdef CONFIG_SYS_NAND_BOOT
 #  define APOLLON_24XX_GPMC_CONFIG1_0   0x0
 #  define APOLLON_24XX_GPMC_CONFIG2_0   0x00141400
 #  define APOLLON_24XX_GPMC_CONFIG3_0   0x00141400
@@ -156,7 +156,7 @@
 #  define APOLLON_24XX_GPMC_CONFIG4_0   0x10081008
 #  define APOLLON_24XX_GPMC_CONFIG5_0   0x01131F1F
 #  define APOLLON_24XX_GPMC_CONFIG6_0   0x000004c4
-# endif	/* endif CFG_NAND_BOOT */
+# endif	/* endif CONFIG_SYS_NAND_BOOT */
 # define APOLLON_24XX_GPMC_CONFIG7_0	(0x00000C40|(APOLLON_CS0_BASE >> 24))
 # define APOLLON_24XX_GPMC_CONFIG1_1	0x00011000
 # define APOLLON_24XX_GPMC_CONFIG2_1	0x001f1f01
@@ -165,6 +165,6 @@
 # define APOLLON_24XX_GPMC_CONFIG5_1	0x041f1F1F
 # define APOLLON_24XX_GPMC_CONFIG6_1	0x000004C4
 # define APOLLON_24XX_GPMC_CONFIG7_1	(0x00000F40|(APOLLON_CS1_BASE >> 24))
-#endif /* endif CFG_PRCM_III */
+#endif /* endif CONFIG_SYS_PRCM_III */
 
 #endif /* endif _APOLLON_OMAP24XX_MEM_H_ */
diff --git a/board/apollon/u-boot.lds b/board/apollon/u-boot.lds
index 7b29a5b79..0aeb4373d 100644
--- a/board/apollon/u-boot.lds
+++ b/board/apollon/u-boot.lds
@@ -58,6 +58,6 @@ SECTIONS
 
 	. = ALIGN(4);
 	__bss_start = .;
-	.bss (NOLOAD) : { *(.bss) }
+	.bss (NOLOAD) : { *(.bss) . = ALIGN(4); }
 	_end = .;
 }
diff --git a/board/armadillo/flash.c b/board/armadillo/flash.c
index 8518856cb..cdbbfd01c 100644
--- a/board/armadillo/flash.c
+++ b/board/armadillo/flash.c
@@ -37,7 +37,7 @@
 #define FL_WORD(addr) (*(volatile unsigned short*)(addr))
 #define FLASH_TIMEOUT 20000000
 
-flash_info_t flash_info[CFG_MAX_FLASH_BANKS];
+flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];
 
 /*-----------------------------------------------------------------------
  */
@@ -47,14 +47,14 @@ ulong flash_init (void)
 	int i, j;
 	ulong size = 0;
 
-	for (i = 0; i < CFG_MAX_FLASH_BANKS; i++) {
+	for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) {
 		ulong flashbase = 0;
 
 		flash_info[i].flash_id = (FUJ_MANUFACT & FLASH_VENDMASK);
 		/*(INTEL_ID_28F128J3 & FLASH_TYPEMASK); */
 		flash_info[i].size = FLASH_BANK_SIZE;
-		flash_info[i].sector_count = CFG_MAX_FLASH_SECT;
-		memset (flash_info[i].protect, 0, CFG_MAX_FLASH_SECT);
+		flash_info[i].sector_count = CONFIG_SYS_MAX_FLASH_SECT;
+		memset (flash_info[i].protect, 0, CONFIG_SYS_MAX_FLASH_SECT);
 		if (i == 0)
 			flashbase = PHYS_FLASH_1;
 		else
@@ -69,13 +69,13 @@ ulong flash_init (void)
 	/* Protect monitor and environment sectors
 	 */
 	flash_protect (FLAG_PROTECT_SET,
-		       CFG_FLASH_BASE,
-		       CFG_FLASH_BASE + monitor_flash_len - 1,
+		       CONFIG_SYS_FLASH_BASE,
+		       CONFIG_SYS_FLASH_BASE + monitor_flash_len - 1,
 		       &flash_info[0]);
 
 	flash_protect (FLAG_PROTECT_SET,
-		       CFG_ENV_ADDR,
-		       CFG_ENV_ADDR + CFG_ENV_SIZE - 1, &flash_info[0]);
+		       CONFIG_ENV_ADDR,
+		       CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1, &flash_info[0]);
 
 	return size;
 }
diff --git a/board/armadillo/u-boot.lds b/board/armadillo/u-boot.lds
index 418101ff8..49d18f7d6 100644
--- a/board/armadillo/u-boot.lds
+++ b/board/armadillo/u-boot.lds
@@ -50,6 +50,6 @@ SECTIONS
 
 	. = ALIGN(4);
 	__bss_start = .;
-	.bss (NOLOAD) : { *(.bss) }
+	.bss (NOLOAD) : { *(.bss) . = ALIGN(4); }
 	_end = .;
 }
diff --git a/board/assabet/u-boot.lds b/board/assabet/u-boot.lds
index 3f52f0431..5507dd3eb 100644
--- a/board/assabet/u-boot.lds
+++ b/board/assabet/u-boot.lds
@@ -53,6 +53,6 @@ SECTIONS
 
 	. = ALIGN(4);
 	__bss_start = .;
-	.bss (NOLOAD) : { *(.bss) }
+	.bss (NOLOAD) : { *(.bss) . = ALIGN(4); }
 	_end = .;
 }
diff --git a/board/atc/atc.c b/board/atc/atc.c
index 79527f438..936c031c6 100644
--- a/board/atc/atc.c
+++ b/board/atc/atc.c
@@ -281,7 +281,7 @@ static long int try_init (volatile memctl8260_t * memctl, ulong sdmr,
 	 */
 	maxsize = (1 + (~orx | 0x7fff)) / 2;
 
-	/* Since CFG_SDRAM_BASE is always 0 (??), we assume that
+	/* Since CONFIG_SYS_SDRAM_BASE is always 0 (??), we assume that
 	 * we are configuring CS1 if base != 0
 	 */
 	sdmr_ptr = &memctl->memc_psdmr;
@@ -306,7 +306,7 @@ static long int try_init (volatile memctl8260_t * memctl, ulong sdmr,
 	 *  accessing the SDRAM with a single-byte transaction."
 	 *
 	 * The appropriate BRx/ORx registers have already been set when we
-	 * get here. The SDRAM can be accessed at the address CFG_SDRAM_BASE.
+	 * get here. The SDRAM can be accessed at the address CONFIG_SYS_SDRAM_BASE.
 	 */
 
 	*sdmr_ptr = sdmr | PSDMR_OP_PREA;
@@ -317,7 +317,7 @@ static long int try_init (volatile memctl8260_t * memctl, ulong sdmr,
 		*base = c;
 
 	*sdmr_ptr = sdmr | PSDMR_OP_MRW;
-	*(base + CFG_MRS_OFFS) = c;	/* setting MR on address lines */
+	*(base + CONFIG_SYS_MRS_OFFS) = c;	/* setting MR on address lines */
 
 	*sdmr_ptr = sdmr | PSDMR_OP_NORM | PSDMR_RFEN;
 	*base = c;
@@ -331,7 +331,7 @@ static long int try_init (volatile memctl8260_t * memctl, ulong sdmr,
 
 int misc_init_r(void)
 {
-	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
 	volatile memctl8260_t *memctl = &immap->im_memctl;
 
 	upmconfig(UPMA, (uint *)rtc_table, sizeof(rtc_table) / sizeof(uint));
@@ -342,37 +342,37 @@ int misc_init_r(void)
 
 phys_size_t initdram (int board_type)
 {
-	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
 	volatile memctl8260_t *memctl = &immap->im_memctl;
 
-#ifndef CFG_RAMBOOT
+#ifndef CONFIG_SYS_RAMBOOT
 	ulong size8, size9;
 #endif
 	long psize;
 
 	psize = 8 * 1024 * 1024;
 
-	memctl->memc_mptpr = CFG_MPTPR;
-	memctl->memc_psrt = CFG_PSRT;
+	memctl->memc_mptpr = CONFIG_SYS_MPTPR;
+	memctl->memc_psrt = CONFIG_SYS_PSRT;
 
-#ifndef CFG_RAMBOOT
+#ifndef CONFIG_SYS_RAMBOOT
 	/* 60x SDRAM setup:
 	 */
-	size8 = try_init (memctl, CFG_PSDMR_8COL, CFG_OR2_8COL,
-			  (uchar *) CFG_SDRAM_BASE);
-	size9 = try_init (memctl, CFG_PSDMR_9COL, CFG_OR2_9COL,
-			  (uchar *) CFG_SDRAM_BASE);
+	size8 = try_init (memctl, CONFIG_SYS_PSDMR_8COL, CONFIG_SYS_OR2_8COL,
+			  (uchar *) CONFIG_SYS_SDRAM_BASE);
+	size9 = try_init (memctl, CONFIG_SYS_PSDMR_9COL, CONFIG_SYS_OR2_9COL,
+			  (uchar *) CONFIG_SYS_SDRAM_BASE);
 
 	if (size8 < size9) {
 		psize = size9;
 		printf ("(60x:9COL) ");
 	} else {
-		psize = try_init (memctl, CFG_PSDMR_8COL, CFG_OR2_8COL,
-				  (uchar *) CFG_SDRAM_BASE);
+		psize = try_init (memctl, CONFIG_SYS_PSDMR_8COL, CONFIG_SYS_OR2_8COL,
+				  (uchar *) CONFIG_SYS_SDRAM_BASE);
 		printf ("(60x:8COL) ");
 	}
 
-#endif	/* CFG_RAMBOOT */
+#endif	/* CONFIG_SYS_RAMBOOT */
 
 	icache_enable ();
 
@@ -380,10 +380,9 @@ phys_size_t initdram (int board_type)
 }
 
 #if defined(CONFIG_CMD_DOC)
-extern void doc_probe (ulong physadr);
 void doc_init (void)
 {
-	doc_probe (CFG_DOC_BASE);
+	doc_probe (CONFIG_SYS_DOC_BASE);
 }
 #endif
 
diff --git a/board/atc/config.mk b/board/atc/config.mk
index eee7a60e3..dd854e7e4 100644
--- a/board/atc/config.mk
+++ b/board/atc/config.mk
@@ -25,7 +25,7 @@
 # ATC boards
 #
 
-# This should be equal to the CFG_FLASH_BASE define in config_atc.h
+# This should be equal to the CONFIG_SYS_FLASH_BASE define in config_atc.h
 # for the "final" configuration, with U-Boot in flash, or the address
 # in RAM where U-Boot is loaded at for debugging.
 #
diff --git a/board/atc/flash.c b/board/atc/flash.c
index 2ab60e866..fd76723e8 100644
--- a/board/atc/flash.c
+++ b/board/atc/flash.c
@@ -23,7 +23,7 @@
 
 #include <common.h>
 
-flash_info_t	flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips	*/
+flash_info_t	flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips	*/
 
 /* NOTE - CONFIG_FLASH_16BIT means the CPU interface is 16-bit, it
  *        has nothing to do with the flash chip being 8-bit or 16-bit.
@@ -67,11 +67,11 @@ unsigned long flash_init (void)
 	int i;
 
 	/* Init: no FLASHes known */
-	for (i=0; i < CFG_MAX_FLASH_BANKS; ++i) {
+	for (i=0; i < CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
 #if 0
 		ulong flashbase = (i == 0) ? PHYS_FLASH_1 : PHYS_FLASH_2;
 #else
-		ulong flashbase = CFG_FLASH_BASE;
+		ulong flashbase = CONFIG_SYS_FLASH_BASE;
 #endif
 
 		memset(&flash_info[i], 0, sizeof(flash_info_t));
@@ -87,20 +87,20 @@ unsigned long flash_init (void)
 		size += flash_info[i].size;
 	}
 
-#if CFG_MONITOR_BASE >= CFG_FLASH_BASE
+#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE
 	/* monitor protection ON by default */
 	flash_protect(FLAG_PROTECT_SET,
-		      CFG_MONITOR_BASE,
-		      CFG_MONITOR_BASE+monitor_flash_len-1,
-		      flash_get_info(CFG_MONITOR_BASE));
+		      CONFIG_SYS_MONITOR_BASE,
+		      CONFIG_SYS_MONITOR_BASE+monitor_flash_len-1,
+		      flash_get_info(CONFIG_SYS_MONITOR_BASE));
 #endif
 
-#ifdef	CFG_ENV_IS_IN_FLASH
+#ifdef	CONFIG_ENV_IS_IN_FLASH
 	/* ENV protection ON by default */
 	flash_protect(FLAG_PROTECT_SET,
-		      CFG_ENV_ADDR,
-		      CFG_ENV_ADDR+CFG_ENV_SIZE-1,
-		      flash_get_info(CFG_ENV_ADDR));
+		      CONFIG_ENV_ADDR,
+		      CONFIG_ENV_ADDR+CONFIG_ENV_SIZE-1,
+		      flash_get_info(CONFIG_ENV_ADDR));
 #endif
 
 
@@ -164,13 +164,13 @@ static flash_info_t *flash_get_info(ulong base)
 	int i;
 	flash_info_t * info;
 
-	for (i = 0; i < CFG_MAX_FLASH_BANKS; i ++) {
+	for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i ++) {
 		info = & flash_info[i];
 		if (info->start[0] <= base && base < info->start[0] + info->size)
 			break;
 	}
 
-	return i == CFG_MAX_FLASH_BANKS ? 0 : info;
+	return i == CONFIG_SYS_MAX_FLASH_BANKS ? 0 : info;
 }
 
 /*-----------------------------------------------------------------------
@@ -476,7 +476,7 @@ int	flash_erase (flash_info_t *info, int s_first, int s_last)
 		udelay (1000);
 
 		while ((*addr & (FPW)0x00800080) != (FPW)0x00800080) {
-			if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+			if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
 				printf ("Timeout\n");
 
 				if (intel) {
@@ -490,14 +490,14 @@ int	flash_erase (flash_info_t *info, int s_first, int s_last)
 			}
 
 			/* show that we're waiting */
-			if ((get_timer(last)) > CFG_HZ) {/* every second */
+			if ((get_timer(last)) > CONFIG_SYS_HZ) {/* every second */
 				putc ('.');
 				last = get_timer(0);
 			}
 		}
 
 		/* show that we're waiting */
-		if ((get_timer(last)) > CFG_HZ) {	/* every second */
+		if ((get_timer(last)) > CONFIG_SYS_HZ) {	/* every second */
 			putc ('.');
 			last = get_timer(0);
 		}
@@ -601,7 +601,7 @@ static int write_word_amd (flash_info_t *info, FPWV *dest, FPW data)
 
 	/* data polling for D7 */
 	while (res == 0 && (*dest & (FPW)0x00800080) != (data & (FPW)0x00800080)) {
-		if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+		if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
 			*dest = (FPW)0x00F000F0;	/* reset bank */
 			res = 1;
 		}
@@ -647,7 +647,7 @@ static int write_word_intel (flash_info_t *info, FPWV *dest, FPW data)
 	start = get_timer (0);
 
 	while (res == 0 && (*dest & (FPW)0x00800080) != (FPW)0x00800080) {
-		if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+		if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
 			*dest = (FPW)0x00B000B0;	/* Suspend program	*/
 			res = 1;
 		}
diff --git a/board/atc/ti113x.c b/board/atc/ti113x.c
index e112eca85..473bb10af 100644
--- a/board/atc/ti113x.c
+++ b/board/atc/ti113x.c
@@ -526,8 +526,8 @@ int i82365_init (void)
 	mem.map = 0;
 	mem.flags = MAP_ATTRIB | MAP_ACTIVE;
 	mem.speed = 300;
-	mem.sys_start = CFG_PCMCIA_MEM_ADDR;
-	mem.sys_stop = CFG_PCMCIA_MEM_ADDR + CFG_PCMCIA_MEM_SIZE - 1;
+	mem.sys_start = CONFIG_SYS_PCMCIA_MEM_ADDR;
+	mem.sys_stop = CONFIG_SYS_PCMCIA_MEM_ADDR + CONFIG_SYS_PCMCIA_MEM_SIZE - 1;
 	mem.card_start = 0;
 	i365_set_mem_map (&socket, &mem);
 
@@ -613,8 +613,8 @@ static void i82365_dump_regions (pci_dev_t dev)
 {
 	u_int tmp[2];
 	u_int *mem = (void *) socket.cb_phys;
-	u_char *cis = (void *) CFG_PCMCIA_MEM_ADDR;
-	u_char *ide = (void *) (CFG_ATA_BASE_ADDR + CFG_ATA_REG_OFFSET);
+	u_char *cis = (void *) CONFIG_SYS_PCMCIA_MEM_ADDR;
+	u_char *ide = (void *) (CONFIG_SYS_ATA_BASE_ADDR + CONFIG_SYS_ATA_REG_OFFSET);
 
 	pci_read_config_dword (dev, 0x00, tmp + 0);
 	pci_read_config_dword (dev, 0x80, tmp + 1);
diff --git a/board/atmel/at91cap9adk/at91cap9adk.c b/board/atmel/at91cap9adk/at91cap9adk.c
index c5082a092..f7d68b705 100644
--- a/board/atmel/at91cap9adk/at91cap9adk.c
+++ b/board/atmel/at91cap9adk/at91cap9adk.c
@@ -30,11 +30,13 @@
 #include <asm/arch/at91_rstc.h>
 #include <asm/arch/gpio.h>
 #include <asm/arch/io.h>
+#include <asm/arch/hardware.h>
 #include <lcd.h>
 #include <atmel_lcdc.h>
 #if defined(CONFIG_RESET_PHY_R) && defined(CONFIG_MACB)
 #include <net.h>
 #endif
+#include <netdev.h>
 
 #define MP_BLOCK_3_BASE	0xFDF00000
 
@@ -50,19 +52,19 @@ static void at91cap9_serial_hw_init(void)
 #ifdef CONFIG_USART0
 	at91_set_A_periph(AT91_PIN_PA22, 1);		/* TXD0 */
 	at91_set_A_periph(AT91_PIN_PA23, 0);		/* RXD0 */
-	at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_US0);
+	at91_sys_write(AT91_PMC_PCER, 1 << AT91CAP9_ID_US0);
 #endif
 
 #ifdef CONFIG_USART1
 	at91_set_A_periph(AT91_PIN_PD0, 1);		/* TXD1 */
 	at91_set_A_periph(AT91_PIN_PD1, 0);		/* RXD1 */
-	at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_US1);
+	at91_sys_write(AT91_PMC_PCER, 1 << AT91CAP9_ID_US1);
 #endif
 
 #ifdef CONFIG_USART2
 	at91_set_A_periph(AT91_PIN_PD2, 1);		/* TXD2 */
 	at91_set_A_periph(AT91_PIN_PD3, 0);		/* RXD2 */
-	at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_US2);
+	at91_sys_write(AT91_PMC_PCER, 1 << AT91CAP9_ID_US2);
 #endif
 
 #ifdef CONFIG_USART3	/* DBGU */
@@ -145,9 +147,9 @@ static void at91cap9_nand_hw_init(void)
 	at91_sys_write(AT91_SMC_MODE(3),
 		       AT91_SMC_READMODE | AT91_SMC_WRITEMODE |
 		       AT91_SMC_EXNWMODE_DISABLE |
-#ifdef CFG_NAND_DBW_16
+#ifdef CONFIG_SYS_NAND_DBW_16
 		       AT91_SMC_DBW_16 |
-#else /* CFG_NAND_DBW_8 */
+#else /* CONFIG_SYS_NAND_DBW_8 */
 		       AT91_SMC_DBW_8 |
 #endif
 		       AT91_SMC_TDF_(1));
@@ -324,6 +326,35 @@ static void at91cap9_lcd_hw_init(void)
 
 	gd->fb_base = 0;
 }
+
+#ifdef CONFIG_LCD_INFO
+#include <nand.h>
+#include <version.h>
+
+void lcd_show_board_info(void)
+{
+	ulong dram_size, nand_size;
+	int i;
+	char temp[32];
+
+	lcd_printf ("%s\n", U_BOOT_VERSION);
+	lcd_printf ("(C) 2008 ATMEL Corp\n");
+	lcd_printf ("at91support@atmel.com\n");
+	lcd_printf ("%s CPU at %s MHz\n",
+		AT91_CPU_NAME,
+		strmhz(temp, AT91_CPU_CLOCK));
+
+	dram_size = 0;
+	for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++)
+		dram_size += gd->bd->bi_dram[i].size;
+	nand_size = 0;
+	for (i = 0; i < CONFIG_SYS_MAX_NAND_DEVICE; i++)
+		nand_size += nand_info[i].size;
+	lcd_printf ("  %ld MB SDRAM, %ld MB NAND\n",
+		dram_size >> 20,
+		nand_size >> 20 );
+}
+#endif /* CONFIG_LCD_INFO */
 #endif
 
 int board_init(void)
@@ -376,3 +407,12 @@ void reset_phy(void)
 #endif
 }
 #endif
+
+int board_eth_init(bd_t *bis)
+{
+	int rc = 0;
+#ifdef CONFIG_MACB
+	rc = macb_eth_initialize(0, (void *)AT91CAP9_BASE_EMAC, 0x00);
+#endif
+	return rc;
+}
diff --git a/board/atmel/at91cap9adk/nand.c b/board/atmel/at91cap9adk/nand.c
index 1dec5582f..cc2263b02 100644
--- a/board/atmel/at91cap9adk/nand.c
+++ b/board/atmel/at91cap9adk/nand.c
@@ -62,7 +62,7 @@ static void at91cap9adk_nand_hwcontrol(struct mtd_info *mtd,
 int board_nand_init(struct nand_chip *nand)
 {
 	nand->ecc.mode = NAND_ECC_SOFT;
-#ifdef CFG_NAND_DBW_16
+#ifdef CONFIG_SYS_NAND_DBW_16
 	nand->options = NAND_BUSWIDTH_16;
 #endif
 	nand->cmd_ctrl = at91cap9adk_nand_hwcontrol;
diff --git a/board/atmel/at91cap9adk/partition.c b/board/atmel/at91cap9adk/partition.c
index eb1a724ab..7e1d46f53 100644
--- a/board/atmel/at91cap9adk/partition.c
+++ b/board/atmel/at91cap9adk/partition.c
@@ -23,10 +23,10 @@
 #include <asm/hardware.h>
 #include <dataflash.h>
 
-AT91S_DATAFLASH_INFO dataflash_info[CFG_MAX_DATAFLASH_BANKS];
+AT91S_DATAFLASH_INFO dataflash_info[CONFIG_SYS_MAX_DATAFLASH_BANKS];
 
-struct dataflash_addr cs[CFG_MAX_DATAFLASH_BANKS] = {
-	{CFG_DATAFLASH_LOGIC_ADDR_CS0, 0},	/* Logical adress, CS */
+struct dataflash_addr cs[CONFIG_SYS_MAX_DATAFLASH_BANKS] = {
+	{CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0, 0},	/* Logical adress, CS */
 };
 
 /*define the area offsets*/
diff --git a/board/atmel/at91rm9200dk/at91rm9200dk.c b/board/atmel/at91rm9200dk/at91rm9200dk.c
index c564f73a5..b89a3fd54 100644
--- a/board/atmel/at91rm9200dk/at91rm9200dk.c
+++ b/board/atmel/at91rm9200dk/at91rm9200dk.c
@@ -47,7 +47,7 @@ int board_init (void)
 	/* so we do _nothing_ here */
 
 	/* arch number of AT91RM9200DK-Board */
-	gd->bd->bi_arch_number = MACH_TYPE_AT91RM9200;
+	gd->bd->bi_arch_number = MACH_TYPE_AT91RM9200DK;
 	/* adress of boot parameters */
 	gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
 
diff --git a/board/atmel/at91rm9200dk/flash.c b/board/atmel/at91rm9200dk/flash.c
index 0513d61d7..902c3c41c 100644
--- a/board/atmel/at91rm9200dk/flash.c
+++ b/board/atmel/at91rm9200dk/flash.c
@@ -59,7 +59,7 @@ OrgDef OrgAT49BV6416[] =
 	{ 127, 64*1024 },	/* 127 * 64 kBytes sectors */
 };
 
-flash_info_t    flash_info[CFG_MAX_FLASH_BANKS];
+flash_info_t    flash_info[CONFIG_SYS_MAX_FLASH_BANKS];
 
 /* AT49BV1614A Codes */
 #define FLASH_CODE1		0xAA
@@ -77,8 +77,8 @@ flash_info_t    flash_info[CFG_MAX_FLASH_BANKS];
 #define CMD_UNLOCK_BYPASS	0x0020
 #define CMD_SECTOR_UNLOCK	0x0070
 
-#define MEM_FLASH_ADDR1		(*(volatile u16 *)(CFG_FLASH_BASE + (0x00005555<<1)))
-#define MEM_FLASH_ADDR2		(*(volatile u16 *)(CFG_FLASH_BASE + (0x00002AAA<<1)))
+#define MEM_FLASH_ADDR1		(*(volatile u16 *)(CONFIG_SYS_FLASH_BASE + (0x00005555<<1)))
+#define MEM_FLASH_ADDR2		(*(volatile u16 *)(CONFIG_SYS_FLASH_BASE + (0x00002AAA<<1)))
 
 #define BIT_ERASE_DONE		0x0080
 #define BIT_RDY_MASK		0x0080
@@ -99,9 +99,9 @@ void flash_identification (flash_info_t * info)
 	MEM_FLASH_ADDR2 = FLASH_CODE2;
 	MEM_FLASH_ADDR1 = ID_IN_CODE;
 
-	manuf_code = *(volatile u16 *) CFG_FLASH_BASE;
-	device_code = *(volatile u16 *) (CFG_FLASH_BASE + 2);
-	add_device_code = *(volatile u16 *) (CFG_FLASH_BASE + (3 << 1));
+	manuf_code = *(volatile u16 *) CONFIG_SYS_FLASH_BASE;
+	device_code = *(volatile u16 *) (CONFIG_SYS_FLASH_BASE + 2);
+	add_device_code = *(volatile u16 *) (CONFIG_SYS_FLASH_BASE + (3 << 1));
 
 	MEM_FLASH_ADDR1 = FLASH_CODE1;
 	MEM_FLASH_ADDR2 = FLASH_CODE2;
@@ -157,7 +157,7 @@ ulong flash_init (void)
 
 	ulong size = 0;
 
-	for (i = 0; i < CFG_MAX_FLASH_BANKS; i++) {
+	for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) {
 		ulong flashbase = 0;
 
 		flash_identification (&flash_info[i]);
@@ -216,18 +216,18 @@ ulong flash_init (void)
 
 	/* Protect binary boot image */
 	flash_protect (FLAG_PROTECT_SET,
-		       CFG_FLASH_BASE,
-		       CFG_FLASH_BASE + CFG_BOOT_SIZE - 1, &flash_info[0]);
+		       CONFIG_SYS_FLASH_BASE,
+		       CONFIG_SYS_FLASH_BASE + CONFIG_SYS_BOOT_SIZE - 1, &flash_info[0]);
 
 	/* Protect environment variables */
 	flash_protect (FLAG_PROTECT_SET,
-		       CFG_ENV_ADDR,
-		       CFG_ENV_ADDR + CFG_ENV_SIZE - 1, &flash_info[0]);
+		       CONFIG_ENV_ADDR,
+		       CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1, &flash_info[0]);
 
 	/* Protect U-Boot gzipped image */
 	flash_protect (FLAG_PROTECT_SET,
-		       CFG_U_BOOT_BASE,
-		       CFG_U_BOOT_BASE + CFG_U_BOOT_SIZE - 1, &flash_info[0]);
+		       CONFIG_SYS_U_BOOT_BASE,
+		       CONFIG_SYS_U_BOOT_BASE + CONFIG_SYS_U_BOOT_SIZE - 1, &flash_info[0]);
 
 	return size;
 }
@@ -345,7 +345,7 @@ int flash_erase (flash_info_t * info, int s_first, int s_last)
 				result = *addr;
 
 				/* check timeout */
-				if (get_timer_masked () > CFG_FLASH_ERASE_TOUT) {
+				if (get_timer_masked () > CONFIG_SYS_FLASH_ERASE_TOUT) {
 					MEM_FLASH_ADDR1 = CMD_READ_ARRAY;
 					chip1 = TMO;
 					break;
@@ -433,7 +433,7 @@ static int write_word (flash_info_t * info, ulong dest, ulong data)
 		result = *addr;
 
 		/* check timeout */
-		if (get_timer_masked () > CFG_FLASH_ERASE_TOUT) {
+		if (get_timer_masked () > CONFIG_SYS_FLASH_ERASE_TOUT) {
 			chip1 = ERR | TMO;
 			break;
 		}
diff --git a/board/atmel/at91rm9200dk/partition.c b/board/atmel/at91rm9200dk/partition.c
index 975be1746..c739b116b 100644
--- a/board/atmel/at91rm9200dk/partition.c
+++ b/board/atmel/at91rm9200dk/partition.c
@@ -23,11 +23,11 @@
 #include <asm/hardware.h>
 #include <dataflash.h>
 
-AT91S_DATAFLASH_INFO dataflash_info[CFG_MAX_DATAFLASH_BANKS];
+AT91S_DATAFLASH_INFO dataflash_info[CONFIG_SYS_MAX_DATAFLASH_BANKS];
 
-struct dataflash_addr cs[CFG_MAX_DATAFLASH_BANKS] = {
-	{CFG_DATAFLASH_LOGIC_ADDR_CS0, 0},	/* Logical adress, CS */
-	{CFG_DATAFLASH_LOGIC_ADDR_CS3, 3}
+struct dataflash_addr cs[CONFIG_SYS_MAX_DATAFLASH_BANKS] = {
+	{CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0, 0},	/* Logical adress, CS */
+	{CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS3, 3}
 };
 
 /*define the area offsets*/
diff --git a/board/atmel/at91rm9200dk/u-boot.lds b/board/atmel/at91rm9200dk/u-boot.lds
index 14cd22800..987b07d94 100644
--- a/board/atmel/at91rm9200dk/u-boot.lds
+++ b/board/atmel/at91rm9200dk/u-boot.lds
@@ -52,6 +52,6 @@ SECTIONS
 
 	. = ALIGN(4);
 	__bss_start = .;
-	.bss (NOLOAD) : { *(.bss) }
+	.bss (NOLOAD) : { *(.bss) . = ALIGN(4); }
 	_end = .;
 }
diff --git a/board/atmel/at91sam9260ek/at91sam9260ek.c b/board/atmel/at91sam9260ek/at91sam9260ek.c
index 06d8512cc..ef99b8b0d 100644
--- a/board/atmel/at91sam9260ek/at91sam9260ek.c
+++ b/board/atmel/at91sam9260ek/at91sam9260ek.c
@@ -30,9 +30,11 @@
 #include <asm/arch/at91_rstc.h>
 #include <asm/arch/gpio.h>
 #include <asm/arch/io.h>
+#include <asm/arch/hardware.h>
 #if defined(CONFIG_RESET_PHY_R) && defined(CONFIG_MACB)
 #include <net.h>
 #endif
+#include <netdev.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -46,19 +48,19 @@ static void at91sam9260ek_serial_hw_init(void)
 #ifdef CONFIG_USART0
 	at91_set_A_periph(AT91_PIN_PB4, 1);		/* TXD0 */
 	at91_set_A_periph(AT91_PIN_PB5, 0);		/* RXD0 */
-	at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_US0);
+	at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9260_ID_US0);
 #endif
 
 #ifdef CONFIG_USART1
 	at91_set_A_periph(AT91_PIN_PB6, 1);		/* TXD1 */
 	at91_set_A_periph(AT91_PIN_PB7, 0);		/* RXD1 */
-	at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_US1);
+	at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9260_ID_US1);
 #endif
 
 #ifdef CONFIG_USART2
 	at91_set_A_periph(AT91_PIN_PB8, 1);		/* TXD2 */
 	at91_set_A_periph(AT91_PIN_PB9, 0);		/* RXD2 */
-	at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_US2);
+	at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9260_ID_US2);
 #endif
 
 #ifdef CONFIG_USART3	/* DBGU */
@@ -90,9 +92,9 @@ static void at91sam9260ek_nand_hw_init(void)
 	at91_sys_write(AT91_SMC_MODE(3),
 		       AT91_SMC_READMODE | AT91_SMC_WRITEMODE |
 		       AT91_SMC_EXNWMODE_DISABLE |
-#ifdef CFG_NAND_DBW_16
+#ifdef CONFIG_SYS_NAND_DBW_16
 		       AT91_SMC_DBW_16 |
-#else /* CFG_NAND_DBW_8 */
+#else /* CONFIG_SYS_NAND_DBW_8 */
 		       AT91_SMC_DBW_8 |
 #endif
 		       AT91_SMC_TDF_(2));
@@ -248,3 +250,12 @@ void reset_phy(void)
 #endif
 }
 #endif
+
+int board_eth_init(bd_t *bis)
+{
+	int rc = 0;
+#ifdef CONFIG_MACB
+	rc = macb_eth_initialize(0, (void *)AT91SAM9260_BASE_EMAC, 0x00);
+#endif
+	return rc;
+}
diff --git a/board/atmel/at91sam9260ek/nand.c b/board/atmel/at91sam9260ek/nand.c
index 665e35c54..c5ac634aa 100644
--- a/board/atmel/at91sam9260ek/nand.c
+++ b/board/atmel/at91sam9260ek/nand.c
@@ -67,7 +67,7 @@ static int at91sam9260ek_nand_ready(struct mtd_info *mtd)
 int board_nand_init(struct nand_chip *nand)
 {
 	nand->ecc.mode = NAND_ECC_SOFT;
-#ifdef CFG_NAND_DBW_16
+#ifdef CONFIG_SYS_NAND_DBW_16
 	nand->options = NAND_BUSWIDTH_16;
 #endif
 	nand->cmd_ctrl = at91sam9260ek_nand_hwcontrol;
diff --git a/board/atmel/at91sam9260ek/partition.c b/board/atmel/at91sam9260ek/partition.c
index 557d6954f..2629c6718 100644
--- a/board/atmel/at91sam9260ek/partition.c
+++ b/board/atmel/at91sam9260ek/partition.c
@@ -23,11 +23,11 @@
 #include <asm/hardware.h>
 #include <dataflash.h>
 
-AT91S_DATAFLASH_INFO dataflash_info[CFG_MAX_DATAFLASH_BANKS];
+AT91S_DATAFLASH_INFO dataflash_info[CONFIG_SYS_MAX_DATAFLASH_BANKS];
 
-struct dataflash_addr cs[CFG_MAX_DATAFLASH_BANKS] = {
-	{CFG_DATAFLASH_LOGIC_ADDR_CS0, 0},	/* Logical adress, CS */
-	{CFG_DATAFLASH_LOGIC_ADDR_CS1, 1}
+struct dataflash_addr cs[CONFIG_SYS_MAX_DATAFLASH_BANKS] = {
+	{CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0, 0},	/* Logical adress, CS */
+	{CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS1, 1}
 };
 
 /*define the area offsets*/
diff --git a/board/atmel/at91sam9261ek/at91sam9261ek.c b/board/atmel/at91sam9261ek/at91sam9261ek.c
index 647aab525..14f236da2 100644
--- a/board/atmel/at91sam9261ek/at91sam9261ek.c
+++ b/board/atmel/at91sam9261ek/at91sam9261ek.c
@@ -48,19 +48,19 @@ static void at91sam9261ek_serial_hw_init(void)
 #ifdef CONFIG_USART0
 	at91_set_A_periph(AT91_PIN_PC8, 1);		/* TXD0 */
 	at91_set_A_periph(AT91_PIN_PC9, 0);		/* RXD0 */
-	at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_US0);
+	at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9261_ID_US0);
 #endif
 
 #ifdef CONFIG_USART1
 	at91_set_A_periph(AT91_PIN_PC12, 1);		/* TXD1 */
 	at91_set_A_periph(AT91_PIN_PC13, 0);		/* RXD1 */
-	at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_US1);
+	at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9261_ID_US1);
 #endif
 
 #ifdef CONFIG_USART2
 	at91_set_A_periph(AT91_PIN_PC14, 1);		/* TXD2 */
 	at91_set_A_periph(AT91_PIN_PC15, 0);		/* RXD2 */
-	at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_US2);
+	at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9261_ID_US2);
 #endif
 
 #ifdef CONFIG_USART3	/* DBGU */
@@ -92,9 +92,9 @@ static void at91sam9261ek_nand_hw_init(void)
 	at91_sys_write(AT91_SMC_MODE(3),
 		       AT91_SMC_READMODE | AT91_SMC_WRITEMODE |
 		       AT91_SMC_EXNWMODE_DISABLE |
-#ifdef CFG_NAND_DBW_16
+#ifdef CONFIG_SYS_NAND_DBW_16
 		       AT91_SMC_DBW_16 |
-#else /* CFG_NAND_DBW_8 */
+#else /* CONFIG_SYS_NAND_DBW_8 */
 		       AT91_SMC_DBW_8 |
 #endif
 		       AT91_SMC_TDF_(2));
@@ -209,6 +209,35 @@ static void at91sam9261ek_lcd_hw_init(void)
 
 	gd->fb_base = AT91SAM9261_SRAM_BASE;
 }
+
+#ifdef CONFIG_LCD_INFO
+#include <nand.h>
+#include <version.h>
+
+void lcd_show_board_info(void)
+{
+	ulong dram_size, nand_size;
+	int i;
+	char temp[32];
+
+	lcd_printf ("%s\n", U_BOOT_VERSION);
+	lcd_printf ("(C) 2008 ATMEL Corp\n");
+	lcd_printf ("at91support@atmel.com\n");
+	lcd_printf ("%s CPU at %s MHz\n",
+		AT91_CPU_NAME,
+		strmhz(temp, AT91_CPU_CLOCK));
+
+	dram_size = 0;
+	for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++)
+		dram_size += gd->bd->bi_dram[i].size;
+	nand_size = 0;
+	for (i = 0; i < CONFIG_SYS_MAX_NAND_DEVICE; i++)
+		nand_size += nand_info[i].size;
+	lcd_printf ("  %ld MB SDRAM, %ld MB NAND\n",
+		dram_size >> 20,
+		nand_size >> 20 );
+}
+#endif /* CONFIG_LCD_INFO */
 #endif
 
 int board_init(void)
diff --git a/board/atmel/at91sam9261ek/nand.c b/board/atmel/at91sam9261ek/nand.c
index fccb9d78d..06395ee21 100644
--- a/board/atmel/at91sam9261ek/nand.c
+++ b/board/atmel/at91sam9261ek/nand.c
@@ -67,7 +67,7 @@ static int at91sam9261ek_nand_ready(struct mtd_info *mtd)
 int board_nand_init(struct nand_chip *nand)
 {
 	nand->ecc.mode = NAND_ECC_SOFT;
-#ifdef CFG_NAND_DBW_16
+#ifdef CONFIG_SYS_NAND_DBW_16
 	nand->options = NAND_BUSWIDTH_16;
 #endif
 	nand->cmd_ctrl = at91sam9261ek_nand_hwcontrol;
diff --git a/board/atmel/at91sam9261ek/partition.c b/board/atmel/at91sam9261ek/partition.c
index 975be1746..c739b116b 100644
--- a/board/atmel/at91sam9261ek/partition.c
+++ b/board/atmel/at91sam9261ek/partition.c
@@ -23,11 +23,11 @@
 #include <asm/hardware.h>
 #include <dataflash.h>
 
-AT91S_DATAFLASH_INFO dataflash_info[CFG_MAX_DATAFLASH_BANKS];
+AT91S_DATAFLASH_INFO dataflash_info[CONFIG_SYS_MAX_DATAFLASH_BANKS];
 
-struct dataflash_addr cs[CFG_MAX_DATAFLASH_BANKS] = {
-	{CFG_DATAFLASH_LOGIC_ADDR_CS0, 0},	/* Logical adress, CS */
-	{CFG_DATAFLASH_LOGIC_ADDR_CS3, 3}
+struct dataflash_addr cs[CONFIG_SYS_MAX_DATAFLASH_BANKS] = {
+	{CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0, 0},	/* Logical adress, CS */
+	{CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS3, 3}
 };
 
 /*define the area offsets*/
diff --git a/board/atmel/at91sam9263ek/at91sam9263ek.c b/board/atmel/at91sam9263ek/at91sam9263ek.c
index 927fc912c..ebd464976 100644
--- a/board/atmel/at91sam9263ek/at91sam9263ek.c
+++ b/board/atmel/at91sam9263ek/at91sam9263ek.c
@@ -31,11 +31,13 @@
 #include <asm/arch/at91_rstc.h>
 #include <asm/arch/gpio.h>
 #include <asm/arch/io.h>
+#include <asm/arch/hardware.h>
 #include <lcd.h>
 #include <atmel_lcdc.h>
 #if defined(CONFIG_RESET_PHY_R) && defined(CONFIG_MACB)
 #include <net.h>
 #endif
+#include <netdev.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -49,19 +51,19 @@ static void at91sam9263ek_serial_hw_init(void)
 #ifdef CONFIG_USART0
 	at91_set_A_periph(AT91_PIN_PA26, 1);		/* TXD0 */
 	at91_set_A_periph(AT91_PIN_PA27, 0);		/* RXD0 */
-	at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_US0);
+	at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9263_ID_US0);
 #endif
 
 #ifdef CONFIG_USART1
 	at91_set_A_periph(AT91_PIN_PD0, 1);		/* TXD1 */
 	at91_set_A_periph(AT91_PIN_PD1, 0);		/* RXD1 */
-	at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_US1);
+	at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9263_ID_US1);
 #endif
 
 #ifdef CONFIG_USART2
 	at91_set_A_periph(AT91_PIN_PD2, 1);		/* TXD2 */
 	at91_set_A_periph(AT91_PIN_PD3, 0);		/* RXD2 */
-	at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_US2);
+	at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9263_ID_US2);
 #endif
 
 #ifdef CONFIG_USART3	/* DBGU */
@@ -93,9 +95,9 @@ static void at91sam9263ek_nand_hw_init(void)
 	at91_sys_write(AT91_SMC_MODE(3),
 		       AT91_SMC_READMODE | AT91_SMC_WRITEMODE |
 		       AT91_SMC_EXNWMODE_DISABLE |
-#ifdef CFG_NAND_DBW_16
+#ifdef CONFIG_SYS_NAND_DBW_16
 		       AT91_SMC_DBW_16 |
-#else /* CFG_NAND_DBW_8 */
+#else /* CONFIG_SYS_NAND_DBW_8 */
 		       AT91_SMC_DBW_8 |
 #endif
 		       AT91_SMC_TDF_(2));
@@ -258,6 +260,35 @@ static void at91sam9263ek_lcd_hw_init(void)
 
 	gd->fb_base = AT91SAM9263_SRAM0_BASE;
 }
+
+#ifdef CONFIG_LCD_INFO
+#include <nand.h>
+#include <version.h>
+
+void lcd_show_board_info(void)
+{
+	ulong dram_size, nand_size;
+	int i;
+	char temp[32];
+
+	lcd_printf ("%s\n", U_BOOT_VERSION);
+	lcd_printf ("(C) 2008 ATMEL Corp\n");
+	lcd_printf ("at91support@atmel.com\n");
+	lcd_printf ("%s CPU at %s MHz\n",
+		AT91_CPU_NAME,
+		strmhz(temp, AT91_CPU_CLOCK));
+
+	dram_size = 0;
+	for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++)
+		dram_size += gd->bd->bi_dram[i].size;
+	nand_size = 0;
+	for (i = 0; i < CONFIG_SYS_MAX_NAND_DEVICE; i++)
+		nand_size += nand_info[i].size;
+	lcd_printf ("  %ld MB SDRAM, %ld MB NAND\n",
+		dram_size >> 20,
+		nand_size >> 20 );
+}
+#endif /* CONFIG_LCD_INFO */
 #endif
 
 int board_init(void)
@@ -308,3 +339,12 @@ void reset_phy(void)
 #endif
 }
 #endif
+
+int board_eth_init(bd_t *bis)
+{
+	int rc = 0;
+#ifdef CONFIG_MACB
+	rc = macb_eth_initialize(0, (void *)AT91SAM9263_BASE_EMAC, 0x00);
+#endif
+	return rc;
+}
diff --git a/board/atmel/at91sam9263ek/nand.c b/board/atmel/at91sam9263ek/nand.c
index 250ec7f39..3c247f6e5 100644
--- a/board/atmel/at91sam9263ek/nand.c
+++ b/board/atmel/at91sam9263ek/nand.c
@@ -67,7 +67,7 @@ static int at91sam9263ek_nand_ready(struct mtd_info *mtd)
 int board_nand_init(struct nand_chip *nand)
 {
 	nand->ecc.mode = NAND_ECC_SOFT;
-#ifdef CFG_NAND_DBW_16
+#ifdef CONFIG_SYS_NAND_DBW_16
 	nand->options = NAND_BUSWIDTH_16;
 #endif
 	nand->cmd_ctrl = at91sam9263ek_nand_hwcontrol;
diff --git a/board/atmel/at91sam9263ek/partition.c b/board/atmel/at91sam9263ek/partition.c
index eb1a724ab..7e1d46f53 100644
--- a/board/atmel/at91sam9263ek/partition.c
+++ b/board/atmel/at91sam9263ek/partition.c
@@ -23,10 +23,10 @@
 #include <asm/hardware.h>
 #include <dataflash.h>
 
-AT91S_DATAFLASH_INFO dataflash_info[CFG_MAX_DATAFLASH_BANKS];
+AT91S_DATAFLASH_INFO dataflash_info[CONFIG_SYS_MAX_DATAFLASH_BANKS];
 
-struct dataflash_addr cs[CFG_MAX_DATAFLASH_BANKS] = {
-	{CFG_DATAFLASH_LOGIC_ADDR_CS0, 0},	/* Logical adress, CS */
+struct dataflash_addr cs[CONFIG_SYS_MAX_DATAFLASH_BANKS] = {
+	{CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0, 0},	/* Logical adress, CS */
 };
 
 /*define the area offsets*/
diff --git a/board/atmel/at91sam9rlek/at91sam9rlek.c b/board/atmel/at91sam9rlek/at91sam9rlek.c
index 509e7c38e..b6fef9d6f 100644
--- a/board/atmel/at91sam9rlek/at91sam9rlek.c
+++ b/board/atmel/at91sam9rlek/at91sam9rlek.c
@@ -48,19 +48,19 @@ static void at91sam9rlek_serial_hw_init(void)
 #ifdef CONFIG_USART0
 	at91_set_A_periph(AT91_PIN_PA6, 1);		/* TXD0 */
 	at91_set_A_periph(AT91_PIN_PA7, 0);		/* RXD0 */
-	at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_US0);
+	at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9RL_ID_US0);
 #endif
 
 #ifdef CONFIG_USART1
 	at91_set_A_periph(AT91_PIN_PA11, 1);		/* TXD1 */
 	at91_set_A_periph(AT91_PIN_PA12, 0);		/* RXD1 */
-	at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_US1);
+	at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9RL_ID_US1);
 #endif
 
 #ifdef CONFIG_USART2
 	at91_set_A_periph(AT91_PIN_PA13, 1);		/* TXD2 */
 	at91_set_A_periph(AT91_PIN_PA14, 0);		/* RXD2 */
-	at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_US2);
+	at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9RL_ID_US2);
 #endif
 
 #ifdef CONFIG_USART3	/* DBGU */
@@ -92,9 +92,9 @@ static void at91sam9rlek_nand_hw_init(void)
 	at91_sys_write(AT91_SMC_MODE(3),
 		       AT91_SMC_READMODE | AT91_SMC_WRITEMODE |
 		       AT91_SMC_EXNWMODE_DISABLE |
-#ifdef CFG_NAND_DBW_16
+#ifdef CONFIG_SYS_NAND_DBW_16
 		       AT91_SMC_DBW_16 |
-#else /* CFG_NAND_DBW_8 */
+#else /* CONFIG_SYS_NAND_DBW_8 */
 		       AT91_SMC_DBW_8 |
 #endif
 		       AT91_SMC_TDF_(2));
@@ -181,6 +181,35 @@ static void at91sam9rlek_lcd_hw_init(void)
 
 	gd->fb_base = 0;
 }
+
+#ifdef CONFIG_LCD_INFO
+#include <nand.h>
+#include <version.h>
+
+void lcd_show_board_info(void)
+{
+	ulong dram_size, nand_size;
+	int i;
+	char temp[32];
+
+	lcd_printf ("%s\n", U_BOOT_VERSION);
+	lcd_printf ("(C) 2008 ATMEL Corp\n");
+	lcd_printf ("at91support@atmel.com\n");
+	lcd_printf ("%s CPU at %s MHz\n",
+		AT91_CPU_NAME,
+		strmhz(temp, AT91_CPU_CLOCK));
+
+	dram_size = 0;
+	for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++)
+		dram_size += gd->bd->bi_dram[i].size;
+	nand_size = 0;
+	for (i = 0; i < CONFIG_SYS_MAX_NAND_DEVICE; i++)
+		nand_size += nand_info[i].size;
+	lcd_printf ("  %ld MB SDRAM, %ld MB NAND\n",
+		dram_size >> 20,
+		nand_size >> 20 );
+}
+#endif /* CONFIG_LCD_INFO */
 #endif
 
 
diff --git a/board/atmel/at91sam9rlek/nand.c b/board/atmel/at91sam9rlek/nand.c
index eb342b842..625f6ec9b 100644
--- a/board/atmel/at91sam9rlek/nand.c
+++ b/board/atmel/at91sam9rlek/nand.c
@@ -67,7 +67,7 @@ static int at91sam9rlek_nand_ready(struct mtd_info *mtd)
 int board_nand_init(struct nand_chip *nand)
 {
 	nand->ecc.mode = NAND_ECC_SOFT;
-#ifdef CFG_NAND_DBW_16
+#ifdef CONFIG_SYS_NAND_DBW_16
 	nand->options = NAND_BUSWIDTH_16;
 #endif
 	nand->cmd_ctrl = at91sam9rlek_nand_hwcontrol;
diff --git a/board/atmel/at91sam9rlek/partition.c b/board/atmel/at91sam9rlek/partition.c
index eb1a724ab..7e1d46f53 100644
--- a/board/atmel/at91sam9rlek/partition.c
+++ b/board/atmel/at91sam9rlek/partition.c
@@ -23,10 +23,10 @@
 #include <asm/hardware.h>
 #include <dataflash.h>
 
-AT91S_DATAFLASH_INFO dataflash_info[CFG_MAX_DATAFLASH_BANKS];
+AT91S_DATAFLASH_INFO dataflash_info[CONFIG_SYS_MAX_DATAFLASH_BANKS];
 
-struct dataflash_addr cs[CFG_MAX_DATAFLASH_BANKS] = {
-	{CFG_DATAFLASH_LOGIC_ADDR_CS0, 0},	/* Logical adress, CS */
+struct dataflash_addr cs[CONFIG_SYS_MAX_DATAFLASH_BANKS] = {
+	{CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0, 0},	/* Logical adress, CS */
 };
 
 /*define the area offsets*/
diff --git a/board/atmel/atngw100/atngw100.c b/board/atmel/atngw100/atngw100.c
index 480d5255f..004d8daa9 100644
--- a/board/atmel/atngw100/atngw100.c
+++ b/board/atmel/atngw100/atngw100.c
@@ -27,6 +27,7 @@
 #include <asm/arch/gpio.h>
 #include <asm/arch/hmatrix.h>
 #include <asm/arch/portmux.h>
+#include <netdev.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -95,8 +96,6 @@ int board_early_init_r(void)
 	return 0;
 }
 
-extern int macb_eth_initialize(int id, void *regs, unsigned int phy_addr);
-
 #ifdef CONFIG_CMD_NET
 int board_eth_init(bd_t *bi)
 {
diff --git a/board/atmel/atstk1000/atstk1000.c b/board/atmel/atstk1000/atstk1000.c
index 7be39931e..c36cb5717 100644
--- a/board/atmel/atstk1000/atstk1000.c
+++ b/board/atmel/atstk1000/atstk1000.c
@@ -26,6 +26,7 @@
 #include <asm/arch/clk.h>
 #include <asm/arch/hmatrix.h>
 #include <asm/arch/portmux.h>
+#include <netdev.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -117,8 +118,6 @@ int board_early_init_r(void)
 	return 0;
 }
 
-extern int macb_eth_initialize(int id, void *regs, unsigned int phy_addr);
-
 #ifdef CONFIG_CMD_NET
 int board_eth_init(bd_t *bi)
 {
diff --git a/board/atmel/atstk1000/flash.c b/board/atmel/atstk1000/flash.c
index e2bfd4aff..4d380f3fa 100644
--- a/board/atmel/atstk1000/flash.c
+++ b/board/atmel/atstk1000/flash.c
@@ -55,17 +55,17 @@ unsigned long flash_init(void)
 	unsigned long addr;
 	unsigned int i;
 
-	flash_info[0].size = CFG_FLASH_SIZE;
+	flash_info[0].size = CONFIG_SYS_FLASH_SIZE;
 	flash_info[0].sector_count = 135;
 
-	flash_identify(uncached((void *)CFG_FLASH_BASE), &flash_info[0]);
+	flash_identify(uncached((void *)CONFIG_SYS_FLASH_BASE), &flash_info[0]);
 
 	for (i = 0, addr = 0; i < 8; i++, addr += 0x2000)
 		flash_info[0].start[i] = addr;
 	for (; i < flash_info[0].sector_count; i++, addr += 0x10000)
 		flash_info[0].start[i] = addr;
 
-	return CFG_FLASH_SIZE;
+	return CONFIG_SYS_FLASH_SIZE;
 }
 
 void flash_print_info(flash_info_t *info)
diff --git a/board/atum8548/atum8548.c b/board/atum8548/atum8548.c
index 337cf31ad..6ef663eeb 100644
--- a/board/atum8548/atum8548.c
+++ b/board/atum8548/atum8548.c
@@ -37,10 +37,6 @@
 #include <libfdt.h>
 #include <fdt_support.h>
 
-#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
-extern void ddr_enable_ecc(unsigned int dram_size);
-#endif
-
 long int fixed_sdram(void);
 
 int board_early_init_f (void)
@@ -50,9 +46,9 @@ int board_early_init_f (void)
 
 int checkboard (void)
 {
-	volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR);
-	volatile ccsr_lbc_t *lbc = (void *)(CFG_MPC85xx_LBC_ADDR);
-	volatile ccsr_local_ecm_t *ecm = (void *)(CFG_MPC85xx_ECM_ADDR);
+	volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+	volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR);
+	volatile ccsr_local_ecm_t *ecm = (void *)(CONFIG_SYS_MPC85xx_ECM_ADDR);
 
 	if ((uint)&gur->porpllsr != 0xe00e0000) {
 		printf("immap size error %lx\n",(ulong)&gur->porpllsr);
@@ -73,15 +69,15 @@ int checkboard (void)
  ************************************************************************/
 long int fixed_sdram (void)
 {
-	volatile ccsr_ddr_t *ddr= (void *)(CFG_MPC85xx_DDR_ADDR);
-
-	ddr->cs0_bnds = CFG_DDR_CS0_BNDS;
-	ddr->cs0_config = CFG_DDR_CS0_CONFIG;
-	ddr->timing_cfg_0 = CFG_DDR_TIMING_0;
-	ddr->timing_cfg_1 = CFG_DDR_TIMING_1;
-	ddr->timing_cfg_2 = CFG_DDR_TIMING_2;
-	ddr->sdram_mode = CFG_DDR_MODE;
-	ddr->sdram_interval = CFG_DDR_INTERVAL;
+	volatile ccsr_ddr_t *ddr= (void *)(CONFIG_SYS_MPC85xx_DDR_ADDR);
+
+	ddr->cs0_bnds = CONFIG_SYS_DDR_CS0_BNDS;
+	ddr->cs0_config = CONFIG_SYS_DDR_CS0_CONFIG;
+	ddr->timing_cfg_0 = CONFIG_SYS_DDR_TIMING_0;
+	ddr->timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1;
+	ddr->timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2;
+	ddr->sdram_mode = CONFIG_SYS_DDR_MODE;
+	ddr->sdram_interval = CONFIG_SYS_DDR_INTERVAL;
     #if defined (CONFIG_DDR_ECC)
 	ddr->err_disable = 0x0000000D;
 	ddr->err_sbe = 0x00ff0000;
@@ -90,13 +86,13 @@ long int fixed_sdram (void)
 	udelay(500);
     #if defined (CONFIG_DDR_ECC)
 	/* Enable ECC checking */
-	ddr->sdram_cfg = (CFG_DDR_CONTROL | 0x20000000);
+	ddr->sdram_cfg = (CONFIG_SYS_DDR_CONTROL | 0x20000000);
     #else
-	ddr->sdram_cfg = CFG_DDR_CONTROL;
+	ddr->sdram_cfg = CONFIG_SYS_DDR_CONTROL;
     #endif
 	asm("sync; isync; msync");
 	udelay(500);
-	return CFG_SDRAM_SIZE * 1024 * 1024;
+	return CONFIG_SYS_SDRAM_SIZE * 1024 * 1024;
 }
 #endif	/* !defined(CONFIG_SPD_EEPROM) */
 
@@ -117,27 +113,21 @@ initdram(int board_type)
 	dram_size = fixed_sdram ();
 #endif
 
-#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
-	/*
-	 * Initialize and enable DDR ECC.
-	 */
-	ddr_enable_ecc(dram_size);
-#endif
 	puts("    DDR: ");
 	return dram_size;
 }
 
-#if defined(CFG_DRAM_TEST)
+#if defined(CONFIG_SYS_DRAM_TEST)
 int
 testdram(void)
 {
-	uint *pstart = (uint *) CFG_MEMTEST_START;
-	uint *pend = (uint *) CFG_MEMTEST_END;
+	uint *pstart = (uint *) CONFIG_SYS_MEMTEST_START;
+	uint *pend = (uint *) CONFIG_SYS_MEMTEST_END;
 	uint *p;
 
 	printf("Testing DRAM from 0x%08x to 0x%08x\n",
-	       CFG_MEMTEST_START,
-	       CFG_MEMTEST_END);
+	       CONFIG_SYS_MEMTEST_START,
+	       CONFIG_SYS_MEMTEST_END);
 
 	printf("DRAM test phase 1:\n");
 	for (p = pstart; p < pend; p++) {
@@ -182,10 +172,13 @@ static struct pci_controller pcie1_hose;
 
 int first_free_busno=0;
 
+extern int fsl_pci_setup_inbound_windows(struct pci_region *r);
+extern void fsl_pci_init(struct pci_controller *hose);
+
 void
 pci_init_board(void)
 {
-	volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR);
+	volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
 
 	uint devdisr = gur->devdisr;
 	uint io_sel = (gur->pordevsr & MPC85xx_PORDEVSR_IO_SEL) >> 19;
@@ -210,11 +203,11 @@ pci_init_board(void)
 
 #ifdef CONFIG_PCIE1
  {
-	volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CFG_PCIE1_ADDR;
-	extern void fsl_pci_init(struct pci_controller *hose);
+	volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCIE1_ADDR;
 	struct pci_controller *hose = &pcie1_hose;
 	int pcie_ep = (host_agent == 5);
 	int pcie_configured  = io_sel & 6;
+	struct pci_region *r = hose->regions;
 
 	if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE)){
 		printf ("\n    PCIE1 connected to slot as %s (base address %x)",
@@ -227,36 +220,31 @@ pci_init_board(void)
 		printf ("\n");
 
 		/* inbound */
-		pci_set_region(hose->regions + 0,
-			       CFG_PCI_MEMORY_BUS,
-			       CFG_PCI_MEMORY_PHYS,
-			       CFG_PCI_MEMORY_SIZE,
-			       PCI_REGION_MEM | PCI_REGION_MEMORY);
+		r += fsl_pci_setup_inbound_windows(r);
 
 		/* outbound memory */
-		pci_set_region(hose->regions + 1,
-			       CFG_PCIE1_MEM_BASE,
-			       CFG_PCIE1_MEM_PHYS,
-			       CFG_PCIE1_MEM_SIZE,
+		pci_set_region(r++,
+			       CONFIG_SYS_PCIE1_MEM_BASE,
+			       CONFIG_SYS_PCIE1_MEM_PHYS,
+			       CONFIG_SYS_PCIE1_MEM_SIZE,
 			       PCI_REGION_MEM);
 
 		/* outbound io */
-		pci_set_region(hose->regions + 2,
-			       CFG_PCIE1_IO_BASE,
-			       CFG_PCIE1_IO_PHYS,
-			       CFG_PCIE1_IO_SIZE,
+		pci_set_region(r++,
+			       CONFIG_SYS_PCIE1_IO_BASE,
+			       CONFIG_SYS_PCIE1_IO_PHYS,
+			       CONFIG_SYS_PCIE1_IO_SIZE,
 			       PCI_REGION_IO);
 
-		hose->region_count = 3;
-#ifdef CFG_PCIE1_MEM_BASE2
+#ifdef CONFIG_SYS_PCIE1_MEM_BASE2
 		/* outbound memory */
-		pci_set_region(hose->regions + 3,
-			       CFG_PCIE1_MEM_BASE2,
-			       CFG_PCIE1_MEM_PHYS2,
-			       CFG_PCIE1_MEM_SIZE2,
+		pci_set_region(r++,
+			       CONFIG_SYS_PCIE1_MEM_BASE2,
+			       CONFIG_SYS_PCIE1_MEM_PHYS2,
+			       CONFIG_SYS_PCIE1_MEM_SIZE2,
 			       PCI_REGION_MEM);
-		hose->region_count++;
 #endif
+		hose->region_count = r - hose->regions;
 		hose->first_busno=first_free_busno;
 
 		pci_setup_indirect(hose, (int) &pci->cfg_addr, (int) &pci->cfg_data);
@@ -278,9 +266,9 @@ pci_init_board(void)
 
 #ifdef CONFIG_PCI1
 {
-	volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CFG_PCI1_ADDR;
-	extern void fsl_pci_init(struct pci_controller *hose);
+	volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCI1_ADDR;
 	struct pci_controller *hose = &pci1_hose;
+	struct pci_region *r = hose->regions;
 
 	uint pci_agent = (host_agent == 6);
 	uint pci_speed = 33333000; /*get_clock_freq (); PCI PSPEED in [4:5] */
@@ -300,26 +288,22 @@ pci_init_board(void)
 			);
 
 		/* inbound */
-		pci_set_region(hose->regions + 0,
-			       CFG_PCI_MEMORY_BUS,
-			       CFG_PCI_MEMORY_PHYS,
-			       CFG_PCI_MEMORY_SIZE,
-			       PCI_REGION_MEM | PCI_REGION_MEMORY);
+		r += fsl_pci_setup_inbound_windows(r);
 
 		/* outbound memory */
-		pci_set_region(hose->regions + 1,
-			       CFG_PCI1_MEM_BASE,
-			       CFG_PCI1_MEM_PHYS,
-			       CFG_PCI1_MEM_SIZE,
+		pci_set_region(r++,
+			       CONFIG_SYS_PCI1_MEM_BASE,
+			       CONFIG_SYS_PCI1_MEM_PHYS,
+			       CONFIG_SYS_PCI1_MEM_SIZE,
 			       PCI_REGION_MEM);
 
 		/* outbound io */
-		pci_set_region(hose->regions + 2,
-			       CFG_PCI1_IO_BASE,
-			       CFG_PCI1_IO_PHYS,
-			       CFG_PCI1_IO_SIZE,
+		pci_set_region(r++,
+			       CONFIG_SYS_PCI1_IO_BASE,
+			       CONFIG_SYS_PCI1_IO_PHYS,
+			       CONFIG_SYS_PCI1_IO_SIZE,
 			       PCI_REGION_IO);
-		hose->region_count = 3;
+		hose->region_count = r - hose->regions;
 		hose->first_busno=first_free_busno;
 		pci_setup_indirect(hose, (int) &pci->cfg_addr, (int) &pci->cfg_data);
 
@@ -337,29 +321,26 @@ pci_init_board(void)
 
 #ifdef CONFIG_PCI2
 {
-	volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CFG_PCI2_ADDR;
+	volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCI2_ADDR;
 	extern void fsl_pci_init(struct pci_controller *hose);
 	struct pci_controller *hose = &pci2_hose;
+	struct pci_region *r = hose->regions;
 
 	if (!(devdisr & MPC85xx_DEVDISR_PCI2)) {
-		pci_set_region(hose->regions + 0,
-			       CFG_PCI_MEMORY_BUS,
-			       CFG_PCI_MEMORY_PHYS,
-			       CFG_PCI_MEMORY_SIZE,
-			       PCI_REGION_MEM | PCI_REGION_MEMORY);
-
-		pci_set_region(hose->regions + 1,
-			       CFG_PCI2_MEM_BASE,
-			       CFG_PCI2_MEM_PHYS,
-			       CFG_PCI2_MEM_SIZE,
+		r += fsl_pci_setup_inbound_windows(r);
+
+		pci_set_region(r++,
+			       CONFIG_SYS_PCI2_MEM_BASE,
+			       CONFIG_SYS_PCI2_MEM_PHYS,
+			       CONFIG_SYS_PCI2_MEM_SIZE,
 			       PCI_REGION_MEM);
 
-		pci_set_region(hose->regions + 2,
-			       CFG_PCI2_IO_BASE,
-			       CFG_PCI2_IO_PHYS,
-			       CFG_PCI2_IO_SIZE,
+		pci_set_region(r++,
+			       CONFIG_SYS_PCI2_IO_BASE,
+			       CONFIG_SYS_PCI2_IO_PHYS,
+			       CONFIG_SYS_PCI2_IO_SIZE,
 			       PCI_REGION_IO);
-		hose->region_count = 3;
+		hose->region_count = r - hose->regions;
 		hose->first_busno=first_free_busno;
 		pci_setup_indirect(hose, (int) &pci->cfg_addr, (int) &pci->cfg_data);
 
@@ -385,39 +366,21 @@ int last_stage_init(void)
 }
 
 #if defined(CONFIG_OF_BOARD_SETUP)
+extern void ft_fsl_pci_setup(void *blob, const char *pci_alias,
+			struct pci_controller *hose);
 
-void
-ft_board_setup(void *blob, bd_t *bd)
+void ft_board_setup(void *blob, bd_t *bd)
 {
-	int node, tmp[2];
-	const char *path;
-
 	ft_cpu_setup(blob, bd);
 
-	node = fdt_path_offset(blob, "/aliases");
-	tmp[0] = 0;
-	if (node >= 0) {
 #ifdef CONFIG_PCI1
-		path = fdt_getprop(blob, node, "pci0", NULL);
-		if (path) {
-			tmp[1] = pci1_hose.last_busno - pci1_hose.first_busno;
-			do_fixup_by_path(blob, path, "bus-range", &tmp, 8, 1);
-		}
+	ft_fsl_pci_setup(blob, "pci0", &pci1_hose);
 #endif
 #ifdef CONFIG_PCI2
-		path = fdt_getprop(blob, node, "pci1", NULL);
-		if (path) {
-			tmp[1] = pci2_hose.last_busno - pci2_hose.first_busno;
-			do_fixup_by_path(blob, path, "bus-range", &tmp, 8, 1);
-		}
+	ft_fsl_pci_setup(blob, "pci1", &pci2_hose);
 #endif
 #ifdef CONFIG_PCIE1
-		path = fdt_getprop(blob, node, "pci2", NULL);
-		if (path) {
-			tmp[1] = pcie1_hose.last_busno - pcie1_hose.first_busno;
-			do_fixup_by_path(blob, path, "bus-range", &tmp, 8, 1);
-		}
+	ft_fsl_pci_setup(blob, "pci2", &pcie1_hose);
 #endif
-	}
 }
 #endif
diff --git a/board/atum8548/ddr.c b/board/atum8548/ddr.c
index f07d746c2..ab64fa88f 100644
--- a/board/atum8548/ddr.c
+++ b/board/atum8548/ddr.c
@@ -10,6 +10,7 @@
 #include <i2c.h>
 
 #include <asm/fsl_ddr_sdram.h>
+#include <asm/fsl_ddr_dimm_params.h>
 
 static void
 get_spd(ddr2_spd_eeprom_t *spd, unsigned char i2c_address)
@@ -37,7 +38,9 @@ void fsl_ddr_get_spd(ddr2_spd_eeprom_t *ctrl_dimms_spd,
 	}
 }
 
-void fsl_ddr_board_options(memctl_options_t *popts, unsigned int ctrl_num)
+void fsl_ddr_board_options(memctl_options_t *popts,
+				dimm_params_t *pdimm,
+				unsigned int ctrl_num)
 {
 	/*
 	 * Factors to consider for clock adjust:
diff --git a/board/atum8548/law.c b/board/atum8548/law.c
index b66fd7b29..b70b0910d 100644
--- a/board/atum8548/law.c
+++ b/board/atum8548/law.c
@@ -48,14 +48,14 @@
  */
 
 struct law_entry law_table[] = {
-	SET_LAW(CFG_PCI1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI_1),
-	SET_LAW(CFG_PCI1_IO_PHYS, LAWAR_SIZE_1M, LAW_TRGT_IF_PCI_1),
-	SET_LAW(CFG_PCI2_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI_2),
-	SET_LAW(CFG_PCI2_IO_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_PCI_2),
-	SET_LAW(CFG_PCIE1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCIE_1),
-	SET_LAW(CFG_PCIE1_IO_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_PCIE_1),
+	SET_LAW(CONFIG_SYS_PCI1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI_1),
+	SET_LAW(CONFIG_SYS_PCI1_IO_PHYS, LAWAR_SIZE_1M, LAW_TRGT_IF_PCI_1),
+	SET_LAW(CONFIG_SYS_PCI2_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI_2),
+	SET_LAW(CONFIG_SYS_PCI2_IO_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_PCI_2),
+	SET_LAW(CONFIG_SYS_PCIE1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCIE_1),
+	SET_LAW(CONFIG_SYS_PCIE1_IO_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_PCIE_1),
 	/* LBC window - maps 256M 0xf0000000 -> 0xffffffff */
-	SET_LAW(CFG_LBC_CACHE_BASE, LAW_SIZE_256M, LAW_TRGT_IF_LBC),
+	SET_LAW(CONFIG_SYS_LBC_CACHE_BASE, LAW_SIZE_256M, LAW_TRGT_IF_LBC),
 };
 
 int num_law_entries = ARRAY_SIZE(law_table);
diff --git a/board/atum8548/tlb.c b/board/atum8548/tlb.c
index 1ef4de41e..ef7942cb1 100644
--- a/board/atum8548/tlb.c
+++ b/board/atum8548/tlb.c
@@ -28,16 +28,16 @@
 
 struct fsl_e_tlb_entry tlb_table[] = {
 	/* TLB 0 - for temp stack in cache */
-	SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR, CFG_INIT_RAM_ADDR,
+	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR, CONFIG_SYS_INIT_RAM_ADDR,
 		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
 		      0, 0, BOOKE_PAGESZ_4K, 0),
-	SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR + 4 * 1024 , CFG_INIT_RAM_ADDR + 4 * 1024,
+	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024 , CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024,
 		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
 		      0, 0, BOOKE_PAGESZ_4K, 0),
-	SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR + 8 * 1024 , CFG_INIT_RAM_ADDR + 8 * 1024,
+	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024 , CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024,
 		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
 		      0, 0, BOOKE_PAGESZ_4K, 0),
-	SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR + 12 * 1024 , CFG_INIT_RAM_ADDR + 12 * 1024,
+	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024 , CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024,
 		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
 		      0, 0, BOOKE_PAGESZ_4K, 0),
 
@@ -47,11 +47,11 @@ struct fsl_e_tlb_entry tlb_table[] = {
 	 * 0xf8000000	128M	FLASH
 	 * Out of reset this entry is only 4K.
 	 */
-	SET_TLB_ENTRY(1, CFG_FLASH_BASE + 0x4000000, CFG_FLASH_BASE + 0x4000000,
+	SET_TLB_ENTRY(1, CONFIG_SYS_FLASH_BASE + 0x4000000, CONFIG_SYS_FLASH_BASE + 0x4000000,
 		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 		      0, 0, BOOKE_PAGESZ_64M, 1),
 
-	SET_TLB_ENTRY(1, CFG_FLASH_BASE, CFG_FLASH_BASE,
+	SET_TLB_ENTRY(1, CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE,
 		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 		      0, 1, BOOKE_PAGESZ_64M, 1),
 
@@ -59,7 +59,7 @@ struct fsl_e_tlb_entry tlb_table[] = {
 	 * TLB 2:	1G	Non-cacheable, guarded
 	 * 0x80000000	1G	PCI1/PCIE  8,9,a,b
 	 */
-	SET_TLB_ENTRY(1, CFG_PCI_PHYS, CFG_PCI_PHYS,
+	SET_TLB_ENTRY(1, CONFIG_SYS_PCI_PHYS, CONFIG_SYS_PCI_PHYS,
 		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 		      0, 2, BOOKE_PAGESZ_1G, 1),
 
@@ -67,11 +67,11 @@ struct fsl_e_tlb_entry tlb_table[] = {
 	 * TLB 3, 4:	512M	Non-cacheable, guarded
 	 * 0xc0000000	1G	PCI2
 	 */
-	SET_TLB_ENTRY(1, CFG_PCI2_MEM_PHYS, CFG_PCI2_MEM_PHYS,
+	SET_TLB_ENTRY(1, CONFIG_SYS_PCI2_MEM_PHYS, CONFIG_SYS_PCI2_MEM_PHYS,
 		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 		      0, 3, BOOKE_PAGESZ_256M, 1),
 
-	SET_TLB_ENTRY(1, CFG_PCI2_MEM_PHYS + 0x10000000, CFG_PCI2_MEM_PHYS + 0x10000000,
+	SET_TLB_ENTRY(1, CONFIG_SYS_PCI2_MEM_PHYS + 0x10000000, CONFIG_SYS_PCI2_MEM_PHYS + 0x10000000,
 		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 		      0, 4, BOOKE_PAGESZ_256M, 1),
 
@@ -82,7 +82,7 @@ struct fsl_e_tlb_entry tlb_table[] = {
 	 * 0xe210_0000	1M	PCI2 IO
 	 * 0xe300_0000	1M	PCIe IO
 	 */
-	SET_TLB_ENTRY(1, CFG_CCSRBAR, CFG_CCSRBAR_PHYS,
+	SET_TLB_ENTRY(1, CONFIG_SYS_CCSRBAR, CONFIG_SYS_CCSRBAR_PHYS,
 		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 		      0, 5, BOOKE_PAGESZ_64M, 1),
 };
diff --git a/board/atum8548/u-boot.lds b/board/atum8548/u-boot.lds
index 46c45d771..650cb9ec9 100644
--- a/board/atum8548/u-boot.lds
+++ b/board/atum8548/u-boot.lds
@@ -138,6 +138,7 @@ SECTIONS
    *(.dynbss)
    *(.bss)
    *(COMMON)
+   . = ALIGN(4);
   }
   _end = . ;
   PROVIDE (end = .);
diff --git a/board/avnet/fx12mm/.gitignore b/board/avnet/fx12mm/.gitignore
new file mode 100644
index 000000000..b644f5994
--- /dev/null
+++ b/board/avnet/fx12mm/.gitignore
@@ -0,0 +1 @@
+config.tmp
diff --git a/board/avnet/fx12mm/Makefile b/board/avnet/fx12mm/Makefile
new file mode 100644
index 000000000..f9437817b
--- /dev/null
+++ b/board/avnet/fx12mm/Makefile
@@ -0,0 +1,27 @@
+#
+# (C) Copyright 2008
+# Ricardo Ribalda,Universidad Autonoma de Madrid, ricardo.ribalda@uam.es
+# This work has been supported by: Qtechnology http://qtec.com/
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+COBJS	+= $(BOARD).o
+
+include $(SRCTREE)/board/xilinx/ppc405-generic/Makefile
diff --git a/board/xilinx/xupv2p/config.mk b/board/avnet/fx12mm/config.mk
index c07b0b35b..f5a603950 100644
--- a/board/xilinx/xupv2p/config.mk
+++ b/board/avnet/fx12mm/config.mk
@@ -1,7 +1,7 @@
 #
-# (C) Copyright 2007 Michal Simek
-#
-# Michal  SIMEK <monstr@monstr.eu>
+# (C) Copyright 2008
+# Ricardo Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@uam.es
+# Work supported by Qtechnology http://www.qtec.com
 #
 # See file CREDITS for list of people who contributed to this
 # project.
@@ -13,7 +13,7 @@
 #
 # This program is distributed in the hope that it will be useful,
 # but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 # GNU General Public License for more details.
 #
 # You should have received a copy of the GNU General Public License
@@ -21,12 +21,6 @@
 # Foundation, Inc., 59 Temple Place, Suite 330, Boston,
 # MA 02111-1307 USA
 #
-# CAUTION: This file is automatically generated by libgen.
-# Version: Xilinx EDK 8.2.02 EDK_Im_Sp2.4
 #
 
-TEXT_BASE = 0x38000000
-
-PLATFORM_CPPFLAGS += -mno-xl-soft-mul
-PLATFORM_CPPFLAGS += -mno-xl-soft-div
-PLATFORM_CPPFLAGS += -mxl-barrel-shift
+sinclude $(SRCTREE)/board/xilinx/ppc405-generic/config.mk
diff --git a/board/avnet/fx12mm/fx12mm.c b/board/avnet/fx12mm/fx12mm.c
new file mode 100644
index 000000000..485864591
--- /dev/null
+++ b/board/avnet/fx12mm/fx12mm.c
@@ -0,0 +1,52 @@
+/*
+ * (C) Copyright 2008
+ *
+ * Author: Xilinx Inc.
+ *
+ * Modified by:
+ *  Georg Schardt <schardt@team-ctech.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+#include <config.h>
+#include <common.h>
+#include <asm/processor.h>
+
+int checkboard(void)
+{
+	char tmp[64];
+	char *s, *e;
+	int i = getenv_r("serial", tmp, sizeof(tmp));
+
+	if (i < 0) {
+		printf("Avnet Virtex4 FX12 with no serial #");
+	} else {
+		for (e = tmp; *e; ++e) {
+			if (*e == ' ')
+				break;
+		}
+		printf("Avnet Virtex4 FX12 Minimodul # ");
+		for (s = tmp; s < e; ++s)
+			putc(*s);
+	}
+	putc('\n');
+	return 0;
+}
diff --git a/board/avnet/fx12mm/xparameters.h b/board/avnet/fx12mm/xparameters.h
new file mode 100644
index 000000000..4410f19b7
--- /dev/null
+++ b/board/avnet/fx12mm/xparameters.h
@@ -0,0 +1,51 @@
+/*
+ * (C) Copyright 2008
+ *
+ * Georg Schardt <schardt@team-ctech.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ * CAUTION: This file is based on the xparameters.h automatically
+ * generated by libgen. Version: Xilinx EDK 10.1.02 Build EDK_K_SP2.5
+ */
+
+#ifndef __XPARAMETER_H__
+#define __XPARAMETER_H__
+
+/* RS232 */
+#define XPAR_UARTNS550_0_CLOCK_FREQ_HZ 100000000
+#define XPAR_UARTNS550_0_BASEADDR 0x83E00000
+
+
+/* INT_C */
+#define XPAR_XPS_INTC_0_DEVICE_ID 0
+#define XPAR_XPS_INTC_0_BASEADDR 0x81800000
+#define XPAR_INTC_MAX_NUM_INTR_INPUTS 2
+
+/* CPU core clock */
+#define XPAR_CORE_CLOCK_FREQ_HZ 300000000
+#define XPAR_PLB_CLOCK_FREQ_HZ  100000000
+
+/* RAM */
+#define XPAR_DDR2_SDRAM_MEM_BASEADDR 0x00000000
+
+/* FLASH */
+#define XPAR_FLASH_MEM0_BASEADDR 0xFFC00000
+
+#endif
diff --git a/board/avnet/v5fx30teval/.gitignore b/board/avnet/v5fx30teval/.gitignore
new file mode 100644
index 000000000..f6418a0c5
--- /dev/null
+++ b/board/avnet/v5fx30teval/.gitignore
@@ -0,0 +1 @@
+/config.tmp
diff --git a/board/avnet/v5fx30teval/Makefile b/board/avnet/v5fx30teval/Makefile
new file mode 100644
index 000000000..de23f296c
--- /dev/null
+++ b/board/avnet/v5fx30teval/Makefile
@@ -0,0 +1,27 @@
+#
+# (C) Copyright 2008
+# Ricardo Ribalda,Universidad Autonoma de Madrid, ricardo.ribalda@uam.es
+# This work has been supported by: Qtechnology http://qtec.com/
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+COBJS	+= $(BOARD).o
+
+include $(SRCTREE)/board/xilinx/ppc440-generic/Makefile
diff --git a/board/avnet/v5fx30teval/config.mk b/board/avnet/v5fx30teval/config.mk
new file mode 100644
index 000000000..51448ce7f
--- /dev/null
+++ b/board/avnet/v5fx30teval/config.mk
@@ -0,0 +1,26 @@
+#
+# (C) Copyright 2008
+# Ricardo Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@uam.es
+# Work supported by Qtechnology http://www.qtec.com
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+#
+
+sinclude $(SRCTREE)/board/xilinx/ppc440-generic/config.mk
diff --git a/board/avnet/v5fx30teval/v5fx30teval.c b/board/avnet/v5fx30teval/v5fx30teval.c
new file mode 100644
index 000000000..14a1d5d52
--- /dev/null
+++ b/board/avnet/v5fx30teval/v5fx30teval.c
@@ -0,0 +1,28 @@
+/*
+ * (C) Copyright 2008
+ * Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@uam.es
+ * This work has been supported by: QTechnology  http://qtec.com/
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include <config.h>
+#include <common.h>
+#include <asm/processor.h>
+
+
+int checkboard(void)
+{
+	puts("Avnet Virtex 5 FX30 Evaluation Board\n");
+	return 0;
+}
diff --git a/board/avnet/v5fx30teval/xparameters.h b/board/avnet/v5fx30teval/xparameters.h
new file mode 100644
index 000000000..bb657fcf2
--- /dev/null
+++ b/board/avnet/v5fx30teval/xparameters.h
@@ -0,0 +1,33 @@
+/*
+ * (C) Copyright 2008
+ * Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@uam.es
+ * This work has been supported by: QTechnology  http://qtec.com/
+ * based on xparameters.h by Xilinx
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef XPARAMETER_H
+#define XPARAMETER_H
+
+#define XPAR_DDR2_SDRAM_MEM_BASEADDR	0x00000000
+#define XPAR_INTC_0_BASEADDR		0x81800000
+#define XPAR_UARTLITE_0_BASEADDR	0x84000000
+#define XPAR_FLASH_MEM0_BASEADDR	0xFF000000
+#define XPAR_PLB_CLOCK_FREQ_HZ		100000000
+#define XPAR_CORE_CLOCK_FREQ_HZ		400000000
+#define XPAR_INTC_MAX_NUM_INTR_INPUTS	13
+#define XPAR_UARTLITE_0_BAUDRATE	9600
+
+#endif
diff --git a/board/barco/barco.c b/board/barco/barco.c
index f8b2084c4..ed3557219 100644
--- a/board/barco/barco.c
+++ b/board/barco/barco.c
@@ -90,7 +90,7 @@ phys_size_t initdram (int board_type)
 	long mear1;
 	long emear1;
 
-	size = get_ram_size (CFG_SDRAM_BASE, CFG_MAX_RAM_SIZE);
+	size = get_ram_size (CONFIG_SYS_SDRAM_BASE, CONFIG_SYS_MAX_RAM_SIZE);
 
 	new_bank0_end = size - 1;
 	mear1 = mpc824x_mpc107_getreg (MEAR1);
@@ -188,14 +188,14 @@ unsigned update_flash (unsigned char *buf)
 unsigned scan_flash (void)
 {
 	char section[] =  "kernel";
-	int cfgFileLen  =  (CFG_FLASH_ERASE_SECTOR_LENGTH >> 1);
+	int cfgFileLen  =  (CONFIG_SYS_FLASH_ERASE_SECTOR_LENGTH >> 1);
 	int sectionPtr  = 0;
 	int foundItem   = 0; /* 0: None, 1: section found, 2: "=" found */
 	int bufPtr;
 	unsigned char *buf;
 
-	buf = (unsigned char*)(CFG_FLASH_RANGE_BASE + CFG_FLASH_RANGE_SIZE \
-			- CFG_FLASH_ERASE_SECTOR_LENGTH);
+	buf = (unsigned char*)(CONFIG_SYS_FLASH_RANGE_BASE + CONFIG_SYS_FLASH_RANGE_SIZE \
+			- CONFIG_SYS_FLASH_ERASE_SECTOR_LENGTH);
 	for (bufPtr = 0; bufPtr < cfgFileLen; ++bufPtr) {
 		if ((buf[bufPtr]==0xFF) && (*(int*)(buf+bufPtr)==0xFFFFFFFF)) {
 			return BOOT_DEFAULT;
@@ -236,14 +236,14 @@ TSBootInfo* find_boot_info (void)
 
 	switch (bootimage) {
 	case TRY_WORKING:
-		info->address = CFG_WORKING_KERNEL_ADDRESS;
+		info->address = CONFIG_SYS_WORKING_KERNEL_ADDRESS;
 		break;
 	case BOOT_WORKING :
-		info->address = CFG_WORKING_KERNEL_ADDRESS;
+		info->address = CONFIG_SYS_WORKING_KERNEL_ADDRESS;
 		break;
 	case BOOT_DEFAULT:
 	default:
-		info->address= CFG_DEFAULT_KERNEL_ADDRESS;
+		info->address= CONFIG_SYS_DEFAULT_KERNEL_ADDRESS;
 
 	}
 	info->size = *((unsigned int *)(info->address ));
diff --git a/board/barco/barco_svc.h b/board/barco/barco_svc.h
index bd924f2b1..e1032609c 100644
--- a/board/barco/barco_svc.h
+++ b/board/barco/barco_svc.h
@@ -38,16 +38,16 @@
 #include <asm/io.h>
 
 /* Defines for the barcohydra board */
-#ifndef CFG_FLASH_ERASE_SECTOR_LENGTH
-#define CFG_FLASH_ERASE_SECTOR_LENGTH (0x10000)
+#ifndef CONFIG_SYS_FLASH_ERASE_SECTOR_LENGTH
+#define CONFIG_SYS_FLASH_ERASE_SECTOR_LENGTH (0x10000)
 #endif
 
-#ifndef CFG_DEFAULT_KERNEL_ADDRESS
-#define CFG_DEFAULT_KERNEL_ADDRESS (CFG_FLASH_BASE + 0x30000)
+#ifndef CONFIG_SYS_DEFAULT_KERNEL_ADDRESS
+#define CONFIG_SYS_DEFAULT_KERNEL_ADDRESS (CONFIG_SYS_FLASH_BASE + 0x30000)
 #endif
 
-#ifndef CFG_WORKING_KERNEL_ADDRESS
-#define CFG_WORKING_KERNEL_ADDRESS (0xFFE00000)
+#ifndef CONFIG_SYS_WORKING_KERNEL_ADDRESS
+#define CONFIG_SYS_WORKING_KERNEL_ADDRESS (0xFFE00000)
 #endif
 
 
diff --git a/board/barco/early_init.S b/board/barco/early_init.S
index 07dafb716..531dcdf4a 100644
--- a/board/barco/early_init.S
+++ b/board/barco/early_init.S
@@ -32,68 +32,68 @@
 
 #if defined(USE_DINK32)
   /* We are running from RAM, so do not clear the MCCR1_MEMGO bit! */
-  #define MCCR1VAL ((CFG_ROMNAL << MCCR1_ROMNAL_SHIFT) | (CFG_ROMFAL << MCCR1_ROMFAL_SHIFT) | MCCR1_MEMGO)
+  #define MCCR1VAL ((CONFIG_SYS_ROMNAL << MCCR1_ROMNAL_SHIFT) | (CONFIG_SYS_ROMFAL << MCCR1_ROMFAL_SHIFT) | MCCR1_MEMGO)
 #else
-  #define MCCR1VAL (CFG_ROMNAL << MCCR1_ROMNAL_SHIFT) | (CFG_ROMFAL << MCCR1_ROMFAL_SHIFT)
+  #define MCCR1VAL (CONFIG_SYS_ROMNAL << MCCR1_ROMNAL_SHIFT) | (CONFIG_SYS_ROMFAL << MCCR1_ROMFAL_SHIFT)
 #endif
 
 	.text
 
 	/* Values to program into memory controller registers */
 tbl:	.long	MCCR1, MCCR1VAL
-	.long	MCCR2, CFG_REFINT << MCCR2_REFINT_SHIFT
+	.long	MCCR2, CONFIG_SYS_REFINT << MCCR2_REFINT_SHIFT
 	.long	MCCR3
-	.long	(((CFG_BSTOPRE & 0x000000f0) >> 4) << MCCR3_BSTOPRE2TO5_SHIFT) | \
-		(CFG_REFREC << MCCR3_REFREC_SHIFT) | \
-		(CFG_RDLAT  << MCCR3_RDLAT_SHIFT)
+	.long	(((CONFIG_SYS_BSTOPRE & 0x000000f0) >> 4) << MCCR3_BSTOPRE2TO5_SHIFT) | \
+		(CONFIG_SYS_REFREC << MCCR3_REFREC_SHIFT) | \
+		(CONFIG_SYS_RDLAT  << MCCR3_RDLAT_SHIFT)
 	.long	MCCR4
-	.long	(CFG_PRETOACT << MCCR4_PRETOACT_SHIFT) | (CFG_ACTTOPRE << MCCR4_ACTTOPRE_SHIFT) | \
-		(CFG_REGISTERD_TYPE_BUFFER << 20) | \
-		(((CFG_BSTOPRE & 0x00000300) >> 8) << MCCR4_BSTOPRE0TO1_SHIFT ) | \
-		((CFG_SDMODE_CAS_LAT << 4) | (CFG_SDMODE_WRAP << 3) | \
-		(CFG_SDMODE_BURSTLEN) << MCCR4_SDMODE_SHIFT) | \
-		(CFG_ACTTORW << MCCR4_ACTTORW_SHIFT) | \
-		((CFG_BSTOPRE & 0x0000000f) << MCCR4_BSTOPRE6TO9_SHIFT )
+	.long	(CONFIG_SYS_PRETOACT << MCCR4_PRETOACT_SHIFT) | (CONFIG_SYS_ACTTOPRE << MCCR4_ACTTOPRE_SHIFT) | \
+		(CONFIG_SYS_REGISTERD_TYPE_BUFFER << 20) | \
+		(((CONFIG_SYS_BSTOPRE & 0x00000300) >> 8) << MCCR4_BSTOPRE0TO1_SHIFT ) | \
+		((CONFIG_SYS_SDMODE_CAS_LAT << 4) | (CONFIG_SYS_SDMODE_WRAP << 3) | \
+		(CONFIG_SYS_SDMODE_BURSTLEN) << MCCR4_SDMODE_SHIFT) | \
+		(CONFIG_SYS_ACTTORW << MCCR4_ACTTORW_SHIFT) | \
+		((CONFIG_SYS_BSTOPRE & 0x0000000f) << MCCR4_BSTOPRE6TO9_SHIFT )
 	.long	MSAR1
-	.long	(((CFG_BANK0_START & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) <<  0) | \
-		(((CFG_BANK1_START & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) <<  8) | \
-		(((CFG_BANK2_START & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 16) | \
-		(((CFG_BANK3_START & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 24)
+	.long	(((CONFIG_SYS_BANK0_START & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) <<  0) | \
+		(((CONFIG_SYS_BANK1_START & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) <<  8) | \
+		(((CONFIG_SYS_BANK2_START & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 16) | \
+		(((CONFIG_SYS_BANK3_START & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 24)
 	.long	EMSAR1
-	.long	(((CFG_BANK0_START & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) <<  0) | \
-		(((CFG_BANK1_START & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) <<  8) | \
-		(((CFG_BANK2_START & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 16) | \
-		(((CFG_BANK3_START & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 24)
+	.long	(((CONFIG_SYS_BANK0_START & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) <<  0) | \
+		(((CONFIG_SYS_BANK1_START & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) <<  8) | \
+		(((CONFIG_SYS_BANK2_START & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 16) | \
+		(((CONFIG_SYS_BANK3_START & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 24)
 	.long	MSAR2
-	.long	(((CFG_BANK4_START & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) <<  0) | \
-		(((CFG_BANK5_START & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) <<  8) | \
-		(((CFG_BANK6_START & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 16) | \
-		(((CFG_BANK7_START & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 24)
+	.long	(((CONFIG_SYS_BANK4_START & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) <<  0) | \
+		(((CONFIG_SYS_BANK5_START & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) <<  8) | \
+		(((CONFIG_SYS_BANK6_START & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 16) | \
+		(((CONFIG_SYS_BANK7_START & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 24)
 	.long	EMSAR2
-	.long	(((CFG_BANK4_START & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) <<  0) | \
-		(((CFG_BANK5_START & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) <<  8) | \
-		(((CFG_BANK6_START & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 16) | \
-		(((CFG_BANK7_START & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 24)
+	.long	(((CONFIG_SYS_BANK4_START & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) <<  0) | \
+		(((CONFIG_SYS_BANK5_START & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) <<  8) | \
+		(((CONFIG_SYS_BANK6_START & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 16) | \
+		(((CONFIG_SYS_BANK7_START & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 24)
 	.long	MEAR1
-	.long	(((CFG_BANK0_END & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) <<  0) | \
-		(((CFG_BANK1_END & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) <<  8) | \
-		(((CFG_BANK2_END & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 16) | \
-		(((CFG_BANK3_END & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 24)
+	.long	(((CONFIG_SYS_BANK0_END & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) <<  0) | \
+		(((CONFIG_SYS_BANK1_END & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) <<  8) | \
+		(((CONFIG_SYS_BANK2_END & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 16) | \
+		(((CONFIG_SYS_BANK3_END & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 24)
 	.long	EMEAR1
-	.long	(((CFG_BANK0_END & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) <<  0) | \
-		(((CFG_BANK1_END & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) <<  8) | \
-		(((CFG_BANK2_END & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 16) | \
-		(((CFG_BANK3_END & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 24)
+	.long	(((CONFIG_SYS_BANK0_END & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) <<  0) | \
+		(((CONFIG_SYS_BANK1_END & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) <<  8) | \
+		(((CONFIG_SYS_BANK2_END & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 16) | \
+		(((CONFIG_SYS_BANK3_END & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 24)
 	.long	MEAR2
-	.long	(((CFG_BANK4_END & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) <<  0) | \
-		(((CFG_BANK5_END & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) <<  8) | \
-		(((CFG_BANK6_END & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 16) | \
-		(((CFG_BANK7_END & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 24)
+	.long	(((CONFIG_SYS_BANK4_END & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) <<  0) | \
+		(((CONFIG_SYS_BANK5_END & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) <<  8) | \
+		(((CONFIG_SYS_BANK6_END & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 16) | \
+		(((CONFIG_SYS_BANK7_END & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 24)
 	.long	EMEAR2
-	.long	(((CFG_BANK4_END & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) <<  0) | \
-		(((CFG_BANK5_END & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) <<  8) | \
-		(((CFG_BANK6_END & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 16) | \
-		(((CFG_BANK7_END & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 24)
+	.long	(((CONFIG_SYS_BANK4_END & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) <<  0) | \
+		(((CONFIG_SYS_BANK5_END & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) <<  8) | \
+		(((CONFIG_SYS_BANK6_END & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 16) | \
+		(((CONFIG_SYS_BANK7_END & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 24)
 	.long	0
 
 
@@ -123,7 +123,7 @@ loop:	lwz	r1, 4(r5)
 	/* set bank enable bits */
 	lis	r0, MBER@h
 	ori	r0, 0, MBER@l
-	li	r1, CFG_BANK_ENABLE
+	li	r1, CONFIG_SYS_BANK_ENABLE
 	stwbrx	r0, 0, r3
 	eieio
 	stb	r1, 0(r4)
@@ -145,8 +145,8 @@ delay:	bdnz	delay
 	eieio
 
 	/* set up stack pointer */
-	lis	r1, CFG_INIT_SP_OFFSET@h
-	ori	r1, r1, CFG_INIT_SP_OFFSET@l
+	lis	r1, CONFIG_SYS_INIT_SP_OFFSET@h
+	ori	r1, r1, CONFIG_SYS_INIT_SP_OFFSET@l
 
 	mtlr	r10
 	blr
diff --git a/board/barco/flash.c b/board/barco/flash.c
index 6cb19b7b0..c9efb15e3 100644
--- a/board/barco/flash.c
+++ b/board/barco/flash.c
@@ -56,17 +56,17 @@
 #define ROM_CS0_START	0xFF800000
 #define ROM_CS1_START	0xFF000000
 
-flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips    */
+flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips    */
 
-#if defined(CFG_ENV_IS_IN_FLASH)
-# ifndef  CFG_ENV_ADDR
-#  define CFG_ENV_ADDR  (CFG_FLASH_BASE + CFG_ENV_OFFSET)
+#if defined(CONFIG_ENV_IS_IN_FLASH)
+# ifndef  CONFIG_ENV_ADDR
+#  define CONFIG_ENV_ADDR  (CONFIG_SYS_FLASH_BASE + CONFIG_ENV_OFFSET)
 # endif
-# ifndef  CFG_ENV_SIZE
-#  define CFG_ENV_SIZE  CFG_ENV_SECT_SIZE
+# ifndef  CONFIG_ENV_SIZE
+#  define CONFIG_ENV_SIZE  CONFIG_ENV_SECT_SIZE
 # endif
-# ifndef  CFG_ENV_SECT_SIZE
-#  define CFG_ENV_SECT_SIZE  CFG_ENV_SIZE
+# ifndef  CONFIG_ENV_SECT_SIZE
+#  define CONFIG_ENV_SECT_SIZE  CONFIG_ENV_SIZE
 # endif
 #endif
 
@@ -140,10 +140,10 @@ unsigned long flash_init(void)
 {
 	unsigned long i;
 	unsigned char j;
-	static const ulong flash_banks[] = CFG_FLASH_BANKS;
+	static const ulong flash_banks[] = CONFIG_SYS_FLASH_BANKS;
 
 	/* Init: no FLASHes known */
-	for (i = 0; i < CFG_MAX_FLASH_BANKS; i++){
+	for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++){
 		flash_info_t * const pflinfo = &flash_info[i];
 		pflinfo->flash_id = FLASH_UNKNOWN;
 		pflinfo->size = 0;
@@ -217,17 +217,17 @@ unsigned long flash_init(void)
 				break;
 		}
 		/* Protect monitor and environment sectors */
-#if CFG_MONITOR_BASE >= CFG_FLASH_BASE
+#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE
 		flash_protect(FLAG_PROTECT_SET,
-				CFG_MONITOR_BASE,
-				CFG_MONITOR_BASE + monitor_flash_len - 1,
+				CONFIG_SYS_MONITOR_BASE,
+				CONFIG_SYS_MONITOR_BASE + monitor_flash_len - 1,
 				&flash_info[0]);
 #endif
 
-#if (CFG_ENV_IS_IN_FLASH == 1) && defined(CFG_ENV_ADDR)
+#if defined(CONFIG_ENV_IS_IN_FLASH) && defined(CONFIG_ENV_ADDR)
 		flash_protect(FLAG_PROTECT_SET,
-				CFG_ENV_ADDR,
-				CFG_ENV_ADDR + CFG_ENV_SIZE - 1,
+				CONFIG_ENV_ADDR,
+				CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1,
 				&flash_info[0]);
 #endif
 
@@ -458,7 +458,7 @@ int flash_erase(flash_info_t *info, int s_first, int s_last)
 	addr = (FLASH_WORD_SIZE *)(info->start[0] + (
 				(info->start[l_sect] - info->start[0]) << sh8b));
 	while ((addr[0] & (FLASH_WORD_SIZE)0x00800080) != (FLASH_WORD_SIZE)0x00800080) {
-		if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+		if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
 			printf ("Timeout\n");
 			return 1;
 		}
@@ -599,7 +599,7 @@ static int write_word (flash_info_t *info, ulong dest, ulong data)
 		start = get_timer (0);
 		while ((dest2[i << sh8b] & (FLASH_WORD_SIZE)0x00800080) !=
 				(data2[i] & (FLASH_WORD_SIZE)0x00800080)) {
-			if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+			if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
 				return (1);
 			}
 		}
diff --git a/board/bc3450/bc3450.c b/board/bc3450/bc3450.c
index a728dc64d..6fb0096be 100644
--- a/board/bc3450/bc3450.c
+++ b/board/bc3450/bc3450.c
@@ -33,6 +33,7 @@
 #include <common.h>
 #include <mpc5xxx.h>
 #include <pci.h>
+#include <netdev.h>
 
 #ifdef CONFIG_VIDEO_SM501
 #include <sm501.h>
@@ -52,7 +53,7 @@
 void ps2mult_early_init(void);
 #endif
 
-#ifndef CFG_RAMBOOT
+#ifndef CONFIG_SYS_RAMBOOT
 static void sdram_start (int hi_addr)
 {
 	long hi_addr_bit = hi_addr ? 0x01000000 : 0;
@@ -99,7 +100,7 @@ static void sdram_start (int hi_addr)
 
 /*
  * ATTENTION: Although partially referenced initdram does NOT make real use
- *	      use of CFG_SDRAM_BASE. The code does not work if CFG_SDRAM_BASE
+ *	      use of CONFIG_SYS_SDRAM_BASE. The code does not work if CONFIG_SYS_SDRAM_BASE
  *	      is something else than 0x00000000.
  */
 
@@ -108,7 +109,7 @@ phys_size_t initdram (int board_type)
 {
 	ulong dramsize = 0;
 	ulong dramsize2 = 0;
-#ifndef CFG_RAMBOOT
+#ifndef CONFIG_SYS_RAMBOOT
 	ulong test1, test2;
 
 	/* setup SDRAM chip selects */
@@ -129,9 +130,9 @@ phys_size_t initdram (int board_type)
 
 	/* find RAM size using SDRAM CS0 only */
 	sdram_start(0);
-	test1 = get_ram_size((long *)CFG_SDRAM_BASE, 0x20000000);
+	test1 = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE, 0x20000000);
 	sdram_start(1);
-	test2 = get_ram_size((long *)CFG_SDRAM_BASE, 0x20000000);
+	test2 = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE, 0x20000000);
 	if (test1 > test2) {
 		sdram_start(0);
 		dramsize = test1;
@@ -157,9 +158,9 @@ phys_size_t initdram (int board_type)
 
 	/* find RAM size using SDRAM CS1 only */
 	sdram_start(0);
-	test1 = get_ram_size((long *)(CFG_SDRAM_BASE + dramsize), 0x20000000);
+	test1 = get_ram_size((long *)(CONFIG_SYS_SDRAM_BASE + dramsize), 0x20000000);
 	sdram_start(1);
-	test2 = get_ram_size((long *)(CFG_SDRAM_BASE + dramsize), 0x20000000);
+	test2 = get_ram_size((long *)(CONFIG_SYS_SDRAM_BASE + dramsize), 0x20000000);
 	if (test1 > test2) {
 		sdram_start(0);
 		dramsize2 = test1;
@@ -180,7 +181,7 @@ phys_size_t initdram (int board_type)
 		*(vu_long *)MPC5XXX_SDRAM_CS1CFG = dramsize; /* disabled */
 	}
 
-#else /* CFG_RAMBOOT */
+#else /* CONFIG_SYS_RAMBOOT */
 
 	/* retrieve size of memory connected to SDRAM CS0 */
 	dramsize = *(vu_long *)MPC5XXX_SDRAM_CS0CFG & 0xFF;
@@ -198,7 +199,7 @@ phys_size_t initdram (int board_type)
 		dramsize2 = 0;
 	}
 
-#endif /* CFG_RAMBOOT */
+#endif /* CONFIG_SYS_RAMBOOT */
 
 	return dramsize;
 }
@@ -208,7 +209,7 @@ phys_size_t initdram (int board_type)
 phys_size_t initdram (int board_type)
 {
 	ulong dramsize = 0;
-#ifndef CFG_RAMBOOT
+#ifndef CONFIG_SYS_RAMBOOT
 	ulong test1, test2;
 
 	/* setup and enable SDRAM chip selects */
@@ -227,9 +228,9 @@ phys_size_t initdram (int board_type)
 
 	/* find RAM size */
 	sdram_start(0);
-	test1 = get_ram_size((ulong *)CFG_SDRAM_BASE, 0x80000000);
+	test1 = get_ram_size((ulong *)CONFIG_SYS_SDRAM_BASE, 0x80000000);
 	sdram_start(1);
-	test2 = get_ram_size((ulong *)CFG_SDRAM_BASE, 0x80000000);
+	test2 = get_ram_size((ulong *)CONFIG_SYS_SDRAM_BASE, 0x80000000);
 	if (test1 > test2) {
 		sdram_start(0);
 		dramsize = test1;
@@ -240,12 +241,12 @@ phys_size_t initdram (int board_type)
 	/* set SDRAM end address according to size */
 	*(vu_long *)MPC5XXX_SDRAM_STOP = ((dramsize - 1) >> 15);
 
-#else /* CFG_RAMBOOT */
+#else /* CONFIG_SYS_RAMBOOT */
 
 	/* Retrieve amount of SDRAM available */
 	dramsize = ((*(vu_long *)MPC5XXX_SDRAM_STOP + 1) << 15);
 
-#endif /* CFG_RAMBOOT */
+#endif /* CONFIG_SYS_RAMBOOT */
 
 	return dramsize;
 }
@@ -404,34 +405,34 @@ int last_stage_init (void)
 	 */
 
 	/* save original SRAM content  */
-	save = *(volatile u16 *)CFG_CS2_START;
+	save = *(volatile u16 *)CONFIG_SYS_CS2_START;
 	restore = 1;
 
 	/* write test pattern to SRAM */
-	*(volatile u16 *)CFG_CS2_START = 0xA5A5;
+	*(volatile u16 *)CONFIG_SYS_CS2_START = 0xA5A5;
 	__asm__ volatile ("sync");
 	/*
 	 * Put a different pattern on the data lines: otherwise they may float
 	 * long enough to read back what we wrote.
 	 */
-	tmp = *(volatile u16 *)CFG_FLASH_BASE;
+	tmp = *(volatile u16 *)CONFIG_SYS_FLASH_BASE;
 	if (tmp == 0xA5A5)
 		puts ("!! possible error in SRAM detection\n");
 
-	if (*(volatile u16 *)CFG_CS2_START != 0xA5A5) {
+	if (*(volatile u16 *)CONFIG_SYS_CS2_START != 0xA5A5) {
 		/* no SRAM at all, disable cs */
 		*(vu_long *)MPC5XXX_ADDECR &= ~(1 << 18);
 		*(vu_long *)MPC5XXX_CS2_START = 0x0000FFFF;
 		*(vu_long *)MPC5XXX_CS2_STOP = 0x0000FFFF;
 		restore = 0;
 		__asm__ volatile ("sync");
-	} else if (*(volatile u16 *)(CFG_CS2_START + (1<<19)) == 0xA5A5) {
+	} else if (*(volatile u16 *)(CONFIG_SYS_CS2_START + (1<<19)) == 0xA5A5) {
 		/* make sure that we access a mirrored address */
-		*(volatile u16 *)CFG_CS2_START = 0x1111;
+		*(volatile u16 *)CONFIG_SYS_CS2_START = 0x1111;
 		__asm__ volatile ("sync");
-		if (*(volatile u16 *)(CFG_CS2_START + (1<<19)) == 0x1111) {
+		if (*(volatile u16 *)(CONFIG_SYS_CS2_START + (1<<19)) == 0x1111) {
 			/* SRAM size = 512 kByte */
-			*(vu_long *)MPC5XXX_CS2_STOP = STOP_REG(CFG_CS2_START,
+			*(vu_long *)MPC5XXX_CS2_STOP = STOP_REG(CONFIG_SYS_CS2_START,
 								0x80000);
 			__asm__ volatile ("sync");
 			puts ("SRAM:  512 kB\n");
@@ -443,7 +444,7 @@ int last_stage_init (void)
 	}
 	/* restore origianl SRAM content  */
 	if (restore) {
-		*(volatile u16 *)CFG_CS2_START = save;
+		*(volatile u16 *)CONFIG_SYS_CS2_START = save;
 		__asm__ volatile ("sync");
 	}
 
@@ -452,21 +453,21 @@ int last_stage_init (void)
 	 */
 
 	/* save origianl FB content  */
-	save = *(volatile u16 *)CFG_CS1_START;
+	save = *(volatile u16 *)CONFIG_SYS_CS1_START;
 	restore = 1;
 
 	/* write test pattern to FB memory */
-	*(volatile u16 *)CFG_CS1_START = 0xA5A5;
+	*(volatile u16 *)CONFIG_SYS_CS1_START = 0xA5A5;
 	__asm__ volatile ("sync");
 	/*
 	 * Put a different pattern on the data lines: otherwise they may float
 	 * long enough to read back what we wrote.
 	 */
-	tmp = *(volatile u16 *)CFG_FLASH_BASE;
+	tmp = *(volatile u16 *)CONFIG_SYS_FLASH_BASE;
 	if (tmp == 0xA5A5)
 		puts ("!! possible error in grafic controller detection\n");
 
-	if (*(volatile u16 *)CFG_CS1_START != 0xA5A5) {
+	if (*(volatile u16 *)CONFIG_SYS_CS1_START != 0xA5A5) {
 		/* no grafic controller at all, disable cs */
 		*(vu_long *)MPC5XXX_ADDECR &= ~(1 << 17);
 		*(vu_long *)MPC5XXX_CS1_START = 0x0000FFFF;
@@ -478,7 +479,7 @@ int last_stage_init (void)
 	}
 	/* restore origianl FB content	*/
 	if (restore) {
-		*(volatile u16 *)CFG_CS1_START = save;
+		*(volatile u16 *)CONFIG_SYS_CS1_START = save;
 		__asm__ volatile ("sync");
 	}
 
@@ -606,21 +607,21 @@ unsigned int board_video_init (void)
 	 */
 
 	/* save origianl FB content  */
-	save = *(volatile u16 *)CFG_CS1_START;
+	save = *(volatile u16 *)CONFIG_SYS_CS1_START;
 	restore = 1;
 
 	/* write test pattern to FB memory */
-	*(volatile u16 *)CFG_CS1_START = 0xA5A5;
+	*(volatile u16 *)CONFIG_SYS_CS1_START = 0xA5A5;
 	__asm__ volatile ("sync");
 	/*
 	 * Put a different pattern on the data lines: otherwise they may float
 	 * long enough to read back what we wrote.
 	 */
-	tmp = *(volatile u16 *)CFG_FLASH_BASE;
+	tmp = *(volatile u16 *)CONFIG_SYS_FLASH_BASE;
 	if (tmp == 0xA5A5)
 		puts ("!! possible error in grafic controller detection\n");
 
-	if (*(volatile u16 *)CFG_CS1_START != 0xA5A5) {
+	if (*(volatile u16 *)CONFIG_SYS_CS1_START != 0xA5A5) {
 		/* no grafic controller found */
 		restore = 0;
 		ret = 0;
@@ -629,7 +630,7 @@ unsigned int board_video_init (void)
 	}
 
 	if (restore) {
-		*(volatile u16 *)CFG_CS1_START = save;
+		*(volatile u16 *)CONFIG_SYS_CS1_START = save;
 		__asm__ volatile ("sync");
 	}
 	return ret;
@@ -669,3 +670,9 @@ int board_get_height (void)
 }
 
 #endif /* CONFIG_VIDEO_SM501 */
+
+int board_eth_init(bd_t *bis)
+{
+	cpu_eth_init(bis); /* Built in FEC comes first */
+	return pci_eth_init(bis);
+}
diff --git a/board/bc3450/cmd_bc3450.c b/board/bc3450/cmd_bc3450.c
index 48bc65de2..ae5061f94 100644
--- a/board/bc3450/cmd_bc3450.c
+++ b/board/bc3450/cmd_bc3450.c
@@ -52,9 +52,9 @@
 #define THERM_WRITE_TL		0x02
 #define THERM_WRITE_TH		0x01
 
-#define CFG_CPU			2
-#define CFG_1SHOT		1
-#define CFG_STANDALONE		0
+#define CONFIG_SYS_CPU			2
+#define CONFIG_SYS_1SHOT		1
+#define CONFIG_SYS_STANDALONE		0
 
 struct therm {
 	int hi;
@@ -513,7 +513,7 @@ static int cmd_temp (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
 			therm.hi <<= 1;
 			therm.lo <<= 1;
 			ds1620_write_state (&therm);
-			ds1620_out (THERM_WRITE_CONFIG, 8, CFG_STANDALONE);
+			ds1620_out (THERM_WRITE_CONFIG, 8, CONFIG_SYS_STANDALONE);
 			return 0;
 		}
 	}
@@ -538,9 +538,9 @@ int can_init (void)
 	static int init_done = 0;
 	int i;
 	struct mpc5xxx_mscan *can1 =
-		(struct mpc5xxx_mscan *) (CFG_MBAR + 0x0900);
+		(struct mpc5xxx_mscan *) (CONFIG_SYS_MBAR + 0x0900);
 	struct mpc5xxx_mscan *can2 =
-		(struct mpc5xxx_mscan *) (CFG_MBAR + 0x0980);
+		(struct mpc5xxx_mscan *) (CONFIG_SYS_MBAR + 0x0980);
 
 	/* GPIO configuration of the CAN pins is done in BC3450.h */
 
@@ -686,9 +686,9 @@ int do_can (char *argv[])
 {
 	int i;
 	struct mpc5xxx_mscan *can1 =
-		(struct mpc5xxx_mscan *) (CFG_MBAR + 0x0900);
+		(struct mpc5xxx_mscan *) (CONFIG_SYS_MBAR + 0x0900);
 	struct mpc5xxx_mscan *can2 =
-		(struct mpc5xxx_mscan *) (CFG_MBAR + 0x0980);
+		(struct mpc5xxx_mscan *) (CONFIG_SYS_MBAR + 0x0980);
 
 	/* send a message on CAN1 */
 	can1->cantbsel = 0x01;
diff --git a/board/bf533-ezkit/bf533-ezkit.c b/board/bf533-ezkit/bf533-ezkit.c
index 583560adb..42c4b5055 100644
--- a/board/bf533-ezkit/bf533-ezkit.c
+++ b/board/bf533-ezkit/bf533-ezkit.c
@@ -50,12 +50,12 @@ phys_size_t initdram(int board_type)
 	printf("tRCD %d SCLK Cycles,tRP %d SCLK Cycles,tRAS %d SCLK Cycles"
 	       "tWR %d SCLK Cycles,CAS Latency %d SCLK cycles \n",
 	       3, 3, 6, 2, 3);
-	printf("SDRAM Begin: 0x%x\n", CFG_SDRAM_BASE);
-	printf("Bank size = %d MB\n", CFG_MAX_RAM_SIZE >> 20);
+	printf("SDRAM Begin: 0x%x\n", CONFIG_SYS_SDRAM_BASE);
+	printf("Bank size = %d MB\n", CONFIG_SYS_MAX_RAM_SIZE >> 20);
 #endif
-	gd->bd->bi_memstart = CFG_SDRAM_BASE;
-	gd->bd->bi_memsize = CFG_MAX_RAM_SIZE;
-	return CFG_MAX_RAM_SIZE;
+	gd->bd->bi_memstart = CONFIG_SYS_SDRAM_BASE;
+	gd->bd->bi_memsize = CONFIG_SYS_MAX_RAM_SIZE;
+	return CONFIG_SYS_MAX_RAM_SIZE;
 }
 
 #if defined(CONFIG_MISC_INIT_R)
@@ -63,10 +63,10 @@ phys_size_t initdram(int board_type)
 int misc_init_r(void)
 {
 	/* Set direction bits for Video en/decoder reset as output      */
-	*(volatile unsigned char *)(CFG_FLASH1_BASE + PSD_PORTA_DIR) =
+	*(volatile unsigned char *)(CONFIG_SYS_FLASH1_BASE + PSD_PORTA_DIR) =
 	    PSDA_VDEC_RST | PSDA_VENC_RST;
 	/* Deactivate Video en/decoder reset lines                      */
-	*(volatile unsigned char *)(CFG_FLASH1_BASE + PSD_PORTA_DOUT) =
+	*(volatile unsigned char *)(CONFIG_SYS_FLASH1_BASE + PSD_PORTA_DOUT) =
 	    PSDA_VDEC_RST | PSDA_VENC_RST;
 
 	return 0;
diff --git a/board/bf533-ezkit/flash-defines.h b/board/bf533-ezkit/flash-defines.h
index 4e043e072..1a4aa5f2f 100644
--- a/board/bf533-ezkit/flash-defines.h
+++ b/board/bf533-ezkit/flash-defines.h
@@ -49,10 +49,10 @@
 #define FLASH_TOT_SECT		40
 #define FLASH_SIZE		0x220000
 #define FLASH_MAN_ST		2
-#define CFG_FLASH0_BASE		0x20000000
+#define CONFIG_SYS_FLASH0_BASE		0x20000000
 #define RESET_VAL		0xF0
 
-flash_info_t flash_info[CFG_MAX_FLASH_BANKS];
+flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];
 
 int get_codes(void);
 int poll_toggle_bit(long lOffset);
diff --git a/board/bf533-ezkit/flash.c b/board/bf533-ezkit/flash.c
index cdf4dc69b..a861e16a3 100644
--- a/board/bf533-ezkit/flash.c
+++ b/board/bf533-ezkit/flash.c
@@ -82,7 +82,7 @@ unsigned long flash_init(void)
 
 	size_b0 = size_b1 = size_b2 = 0;
 #ifdef DEBUG
-	printf("Flash Memory Start 0x%x\n", CFG_FLASH_BASE);
+	printf("Flash Memory Start 0x%x\n", CONFIG_SYS_FLASH_BASE);
 	printf("Memory Map for the Flash\n");
 	printf("0x20000000 - 0x200FFFFF Flash A Primary (1MB)\n");
 	printf("0x20100000 - 0x201FFFFF Flash B Primary (1MB)\n");
@@ -90,20 +90,20 @@ unsigned long flash_init(void)
 	printf("0x20280000 - 0x2028FFFF Flash B Secondary (64KB)\n");
 	printf("Please type command flinfo for information on Sectors \n");
 #endif
-	for (i = 0; i < CFG_MAX_FLASH_BANKS; ++i) {
+	for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
 		flash_info[i].flash_id = FLASH_UNKNOWN;
 	}
 
-	size_b0 = flash_get_size(CFG_FLASH0_BASE, &flash_info[0], 0);
-	size_b1 = flash_get_size(CFG_FLASH0_BASE, &flash_info[1], 1);
-	size_b2 = flash_get_size(CFG_FLASH0_BASE, &flash_info[2], 2);
+	size_b0 = flash_get_size(CONFIG_SYS_FLASH0_BASE, &flash_info[0], 0);
+	size_b1 = flash_get_size(CONFIG_SYS_FLASH0_BASE, &flash_info[1], 1);
+	size_b2 = flash_get_size(CONFIG_SYS_FLASH0_BASE, &flash_info[2], 2);
 
 	if (flash_info[0].flash_id == FLASH_UNKNOWN || size_b0 == 0) {
 		printf("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n",
 		       size_b0, size_b0 >> 20);
 	}
 
-	(void)flash_protect(FLAG_PROTECT_SET, CFG_FLASH0_BASE,
+	(void)flash_protect(FLAG_PROTECT_SET, CONFIG_SYS_FLASH0_BASE,
 			    (flash_info[0].start[2] - 1), &flash_info[0]);
 
 	return (size_b0 + size_b1 + size_b2);
@@ -180,7 +180,7 @@ int write_buff(flash_info_t * info, uchar * src, ulong addr, ulong cnt)
 	int ret;
 	int d;
 	if (addr % 2) {
-		read_flash(addr - 1 - CFG_FLASH_BASE, &d);
+		read_flash(addr - 1 - CONFIG_SYS_FLASH_BASE, &d);
 		d = (int)((d & 0x00FF) | (*src++ << 8));
 		ret = write_data(addr - 1, 2, (uchar *) & d);
 		if (ret == FLASH_FAIL)
@@ -196,7 +196,7 @@ int write_buff(flash_info_t * info, uchar * src, ulong addr, ulong cnt)
 int write_data(long lStart, long lCount, uchar * pnData)
 {
 	long i = 0;
-	unsigned long ulOffset = lStart - CFG_FLASH_BASE;
+	unsigned long ulOffset = lStart - CONFIG_SYS_FLASH_BASE;
 	int d;
 	int nSector = 0;
 	int flag = 0;
@@ -285,7 +285,7 @@ int write_flash(long nOffset, int nValue)
 {
 	long addr;
 
-	addr = (CFG_FLASH_BASE + nOffset);
+	addr = (CONFIG_SYS_FLASH_BASE + nOffset);
 	SSYNC();
 	*(unsigned volatile short *)addr = nValue;
 	SSYNC();
@@ -297,7 +297,7 @@ int write_flash(long nOffset, int nValue)
 int read_flash(long nOffset, int *pnValue)
 {
 	int nValue = 0x0;
-	long addr = (CFG_FLASH_BASE + nOffset);
+	long addr = (CONFIG_SYS_FLASH_BASE + nOffset);
 
 	if (nOffset != 0x2)
 		reset_flash();
@@ -396,7 +396,7 @@ int erase_block_flash(int nBlock, unsigned long address)
 	if ((nBlock < 0) || (nBlock > AFP_NumSectors))
 		return FALSE;
 
-	ulSectorOff = (address - CFG_FLASH_BASE);
+	ulSectorOff = (address - CONFIG_SYS_FLASH_BASE);
 
 	write_flash((WRITESEQ1 | ulSectorOff), WRITEDATA1);
 	write_flash((WRITESEQ2 | ulSectorOff), WRITEDATA2);
diff --git a/board/bf533-ezkit/psd4256.h b/board/bf533-ezkit/psd4256.h
index cc654b895..9b381d27f 100644
--- a/board/bf533-ezkit/psd4256.h
+++ b/board/bf533-ezkit/psd4256.h
@@ -27,8 +27,8 @@
 
 /*
  * Flash A/B Port A configuration registers.
- * Addresses are offset values to CFG_FLASH1_BASE
- * for Flash A and CFG_FLASH2_BASE for Flash B.
+ * Addresses are offset values to CONFIG_SYS_FLASH1_BASE
+ * for Flash A and CONFIG_SYS_FLASH2_BASE for Flash B.
  */
 
 #define	PSD_PORTA_DIN	0x070000
@@ -37,8 +37,8 @@
 
 /*
  * Flash A/B Port B configuration registers
- * Addresses are offset values to CFG_FLASH1_BASE
- * for Flash A and CFG_FLASH2_BASE for Flash B.
+ * Addresses are offset values to CONFIG_SYS_FLASH1_BASE
+ * for Flash A and CONFIG_SYS_FLASH2_BASE for Flash B.
  */
 
 #define	PSD_PORTB_DIN	0x070001
diff --git a/board/bf533-ezkit/u-boot.lds.S b/board/bf533-ezkit/u-boot.lds.S
index e4b83d11d..70764acf1 100644
--- a/board/bf533-ezkit/u-boot.lds.S
+++ b/board/bf533-ezkit/u-boot.lds.S
@@ -36,7 +36,7 @@
  * for different CPU's which may lack non-cache L1 data.
  */
 #ifndef L1_DATA_B_SRAM
-# define L1_DATA_B_SRAM      CFG_MONITOR_BASE
+# define L1_DATA_B_SRAM      CONFIG_SYS_MONITOR_BASE
 # define L1_DATA_B_SRAM_SIZE 0
 #endif
 
@@ -45,7 +45,7 @@ OUTPUT_ARCH(bfin)
 /* The 0xC offset is so we don't clobber the tiny LDR jump block. */
 MEMORY
 {
-	ram     : ORIGIN = CFG_MONITOR_BASE, LENGTH = CFG_MONITOR_LEN
+	ram     : ORIGIN = CONFIG_SYS_MONITOR_BASE, LENGTH = CONFIG_SYS_MONITOR_LEN
 	l1_code : ORIGIN = L1_INST_SRAM+0xC, LENGTH = L1_INST_SRAM_SIZE
 	l1_data : ORIGIN = L1_DATA_B_SRAM,   LENGTH = L1_DATA_B_SRAM_SIZE
 }
@@ -54,6 +54,8 @@ SECTIONS
 {
 	.text :
 	{
+		cpu/blackfin/start.o (.text)
+
 #ifdef ENV_IS_EMBEDDED
 		/* WARNING - the following is hand-optimized to fit within
 		 * the sector before the environment sector. If it throws
@@ -61,7 +63,6 @@ SECTIONS
 		 * it linked after the configuration sector.
 		 */
 
-		cpu/blackfin/start.o		(.text)
 		cpu/blackfin/traps.o		(.text)
 		cpu/blackfin/interrupt.o	(.text)
 		cpu/blackfin/serial.o		(.text)
@@ -71,9 +72,13 @@ SECTIONS
 		board/bf533-ezkit/bf533-ezkit.o		(.text)
 
 		. = DEFINED(env_offset) ? env_offset : .;
-		common/environment.o	(.text)
+		common/env_embedded.o	(.text)
 #endif
 
+		__initcode_start = .;
+		cpu/blackfin/initcode.o (.text)
+		__initcode_end = .;
+
 		*(.text .text.*)
 	} >ram
 
diff --git a/board/bf533-stamp/bf533-stamp.c b/board/bf533-stamp/bf533-stamp.c
index 7a17dfa55..0c6324b4b 100644
--- a/board/bf533-stamp/bf533-stamp.c
+++ b/board/bf533-stamp/bf533-stamp.c
@@ -26,7 +26,6 @@
  */
 
 #include <common.h>
-#include <asm/mem_init.h>
 #include <asm/io.h>
 #include "bf533-stamp.h"
 
@@ -56,11 +55,11 @@ phys_size_t initdram(int board_type)
 	    ("  tRCD:%d Cycles; tRP:%d Cycles; tRAS:%d Cycles; tWR:%d Cycles; "
 	     "CAS Latency:%d cycles\n", (SDRAM_tRCD >> 15), (SDRAM_tRP >> 11),
 	     (SDRAM_tRAS >> 6), (SDRAM_tWR >> 19), (SDRAM_CL >> 2));
-	printf("SDRAM Begin: 0x%x\n", CFG_SDRAM_BASE);
+	printf("SDRAM Begin: 0x%x\n", CONFIG_SYS_SDRAM_BASE);
 	printf("Bank size = %d MB\n", 128);
 #endif
-	gd->bd->bi_memstart = CFG_SDRAM_BASE;
-	gd->bd->bi_memsize = CFG_MAX_RAM_SIZE;
+	gd->bd->bi_memstart = CONFIG_SYS_SDRAM_BASE;
+	gd->bd->bi_memsize = CONFIG_SYS_MAX_RAM_SIZE;
 	return (gd->bd->bi_memsize);
 }
 
diff --git a/board/bf533-stamp/u-boot.lds.S b/board/bf533-stamp/u-boot.lds.S
index 01780c570..187309f3f 100644
--- a/board/bf533-stamp/u-boot.lds.S
+++ b/board/bf533-stamp/u-boot.lds.S
@@ -36,7 +36,7 @@
  * for different CPU's which may lack non-cache L1 data.
  */
 #ifndef L1_DATA_B_SRAM
-# define L1_DATA_B_SRAM      CFG_MONITOR_BASE
+# define L1_DATA_B_SRAM      CONFIG_SYS_MONITOR_BASE
 # define L1_DATA_B_SRAM_SIZE 0
 #endif
 
@@ -45,7 +45,7 @@ OUTPUT_ARCH(bfin)
 /* The 0xC offset is so we don't clobber the tiny LDR jump block. */
 MEMORY
 {
-	ram     : ORIGIN = CFG_MONITOR_BASE, LENGTH = CFG_MONITOR_LEN
+	ram     : ORIGIN = CONFIG_SYS_MONITOR_BASE, LENGTH = CONFIG_SYS_MONITOR_LEN
 	l1_code : ORIGIN = L1_INST_SRAM+0xC, LENGTH = L1_INST_SRAM_SIZE
 	l1_data : ORIGIN = L1_DATA_B_SRAM,   LENGTH = L1_DATA_B_SRAM_SIZE
 }
@@ -54,6 +54,8 @@ SECTIONS
 {
 	.text :
 	{
+		cpu/blackfin/start.o (.text)
+
 #ifdef ENV_IS_EMBEDDED
 		/* WARNING - the following is hand-optimized to fit within
 		 * the sector before the environment sector. If it throws
@@ -61,7 +63,6 @@ SECTIONS
 		 * it linked after the configuration sector.
 		 */
 
-		cpu/blackfin/start.o		(.text)
 		cpu/blackfin/traps.o		(.text)
 		cpu/blackfin/interrupt.o	(.text)
 		cpu/blackfin/serial.o		(.text)
@@ -69,9 +70,13 @@ SECTIONS
 		lib_generic/crc32.o		(.text)
 
 		. = DEFINED(env_offset) ? env_offset : .;
-		common/environment.o	(.text)
+		common/env_embedded.o	(.text)
 #endif
 
+		__initcode_start = .;
+		cpu/blackfin/initcode.o (.text)
+		__initcode_end = .;
+
 		*(.text .text.*)
 	} >ram
 
diff --git a/board/bf537-stamp/bf537-stamp.c b/board/bf537-stamp/bf537-stamp.c
index a9b7a68c5..7303f1b41 100644
--- a/board/bf537-stamp/bf537-stamp.c
+++ b/board/bf537-stamp/bf537-stamp.c
@@ -32,6 +32,7 @@
 #include <asm/io.h>
 #include <net.h>
 #include <asm/mach-common/bits/bootrom.h>
+#include <netdev.h>
 
 /**
  * is_valid_ether_addr - Determine if the given Ethernet address is valid
@@ -108,12 +109,12 @@ phys_size_t initdram(int board_type)
 	printf("tRCD %d SCLK Cycles,tRP %d SCLK Cycles,tRAS %d SCLK Cycles"
 	       "tWR %d SCLK Cycles,CAS Latency %d SCLK cycles \n",
 	       3, 3, 6, 2, 3);
-	printf("SDRAM Begin: 0x%x\n", CFG_SDRAM_BASE);
-	printf("Bank size = %d MB\n", CFG_MAX_RAM_SIZE >> 20);
+	printf("SDRAM Begin: 0x%x\n", CONFIG_SYS_SDRAM_BASE);
+	printf("Bank size = %d MB\n", CONFIG_SYS_MAX_RAM_SIZE >> 20);
 #endif
-	gd->bd->bi_memstart = CFG_SDRAM_BASE;
-	gd->bd->bi_memsize = CFG_MAX_RAM_SIZE;
-	return CFG_MAX_RAM_SIZE;
+	gd->bd->bi_memstart = CONFIG_SYS_SDRAM_BASE;
+	gd->bd->bi_memsize = CONFIG_SYS_MAX_RAM_SIZE;
+	return CONFIG_SYS_MAX_RAM_SIZE;
 }
 
 #if defined(CONFIG_MISC_INIT_R)
@@ -156,8 +157,6 @@ int misc_init_r(void)
 
 #if defined(CONFIG_BFIN_MAC)
 
-extern int bfin_EMAC_initialize(bd_t *bis);
-
 int board_eth_init(bd_t *bis)
 {
 	return bfin_EMAC_initialize(bis);
@@ -237,11 +236,11 @@ int flash_post_test(int flags)
 		erase_block_flash(n);
 		printf("OK\r");
 		printf("--------Program block:%2d...", n);
-		write_data(CFG_FLASH_BASE + offset, BLOCK_SIZE, pbuf);
+		write_data(CONFIG_SYS_FLASH_BASE + offset, BLOCK_SIZE, pbuf);
 		printf("OK\r");
 		printf("--------Verify  block:%2d...", n);
 		for (i = 0; i < BLOCK_SIZE; i += 2) {
-			if (*(unsigned short *)(CFG_FLASH_BASE + offset + i) !=
+			if (*(unsigned short *)(CONFIG_SYS_FLASH_BASE + offset + i) !=
 			    *temp++) {
 				value = 1;
 				result = 1;
diff --git a/board/bf537-stamp/nand.c b/board/bf537-stamp/nand.c
index 9800083c9..c597f2db1 100644
--- a/board/bf537-stamp/nand.c
+++ b/board/bf537-stamp/nand.c
@@ -44,13 +44,13 @@ static void bfin_hwcontrol(struct mtd_info *mtd, int cmd, unsigned int ctrl)
 
 	if (ctrl & NAND_CTRL_CHANGE) {
 		if( ctrl & NAND_CLE )
-			IO_ADDR_W = CFG_NAND_BASE + BFIN_NAND_CLE;
+			IO_ADDR_W = CONFIG_SYS_NAND_BASE + BFIN_NAND_CLE;
 		else
-			IO_ADDR_W = CFG_NAND_BASE;
+			IO_ADDR_W = CONFIG_SYS_NAND_BASE;
 		if( ctrl & NAND_ALE )
-			IO_ADDR_W = CFG_NAND_BASE + BFIN_NAND_ALE;
+			IO_ADDR_W = CONFIG_SYS_NAND_BASE + BFIN_NAND_ALE;
 		else
-			IO_ADDR_W = CFG_NAND_BASE;
+			IO_ADDR_W = CONFIG_SYS_NAND_BASE;
 		this->IO_ADDR_W = (void __iomem *) IO_ADDR_W;
 	}
 	this->IO_ADDR_R = this->IO_ADDR_W;
diff --git a/board/bf537-stamp/post-memory.c b/board/bf537-stamp/post-memory.c
index fa119919b..889aa5c4f 100644
--- a/board/bf537-stamp/post-memory.c
+++ b/board/bf537-stamp/post-memory.c
@@ -6,7 +6,7 @@
 #include <post.h>
 #include <watchdog.h>
 
-#if CONFIG_POST & CFG_POST_MEMORY
+#if CONFIG_POST & CONFIG_SYS_POST_MEMORY
 #define CLKIN 25000000
 #define PATTERN1 0x5A5A5A5A
 #define PATTERN2 0xAAAAAAAA
@@ -27,18 +27,18 @@ const int pll[CCLK_NUM][SCLK_NUM][2] = {
 	{{4, 1}, {4, 2}, {4, 4}}	/* CCLK = 100M */
 };
 const char *const log[CCLK_NUM][SCLK_NUM] = {
-	{"CCLK-500Mhz SCLK-125Mhz:    Writing...\0",
-	 "CCLK-500Mhz SCLK-100Mhz:    Writing...\0",
-	 "CCLK-500Mhz SCLK- 50Mhz:    Writing...\0",},
-	{"CCLK-400Mhz SCLK-100Mhz:    Writing...\0",
-	 "CCLK-400Mhz SCLK- 80Mhz:    Writing...\0",
-	 "CCLK-400Mhz SCLK- 50Mhz:    Writing...\0",},
-	{"CCLK-200Mhz SCLK-100Mhz:    Writing...\0",
-	 "CCLK-200Mhz SCLK- 50Mhz:    Writing...\0",
-	 "CCLK-200Mhz SCLK- 40Mhz:    Writing...\0",},
-	{"CCLK-100Mhz SCLK-100Mhz:    Writing...\0",
-	 "CCLK-100Mhz SCLK- 50Mhz:    Writing...\0",
-	 "CCLK-100Mhz SCLK- 25Mhz:    Writing...\0",},
+	{"CCLK-500MHz SCLK-125MHz:    Writing...\0",
+	 "CCLK-500MHz SCLK-100MHz:    Writing...\0",
+	 "CCLK-500MHz SCLK- 50MHz:    Writing...\0",},
+	{"CCLK-400MHz SCLK-100MHz:    Writing...\0",
+	 "CCLK-400MHz SCLK- 80MHz:    Writing...\0",
+	 "CCLK-400MHz SCLK- 50MHz:    Writing...\0",},
+	{"CCLK-200MHz SCLK-100MHz:    Writing...\0",
+	 "CCLK-200MHz SCLK- 50MHz:    Writing...\0",
+	 "CCLK-200MHz SCLK- 40MHz:    Writing...\0",},
+	{"CCLK-100MHz SCLK-100MHz:    Writing...\0",
+	 "CCLK-100MHz SCLK- 50MHz:    Writing...\0",
+	 "CCLK-100MHz SCLK- 25MHz:    Writing...\0",},
 };
 
 int memory_post_test(int flags)
@@ -71,10 +71,10 @@ int memory_post_test(int flags)
 			post_init_uart(sclk);
 			post_out_buff("\n\r\0");
 			post_out_buff(log[m][n]);
-			for (addr = 0x0; addr < CFG_MAX_RAM_SIZE; addr += 4)
+			for (addr = 0x0; addr < CONFIG_SYS_MAX_RAM_SIZE; addr += 4)
 				*(unsigned long *)addr = PATTERN1;
 			post_out_buff("Reading...\0");
-			for (addr = 0x0; addr < CFG_MAX_RAM_SIZE; addr += 4) {
+			for (addr = 0x0; addr < CONFIG_SYS_MAX_RAM_SIZE; addr += 4) {
 				if ((*(unsigned long *)addr) != PATTERN1) {
 					post_out_buff("Error\n\r\0");
 					ret = 0;
@@ -318,5 +318,5 @@ int post_init_sdram(int sclk)
 	return mem_SDRRC;
 }
 
-#endif				/* CONFIG_POST & CFG_POST_MEMORY */
+#endif				/* CONFIG_POST & CONFIG_SYS_POST_MEMORY */
 #endif				/* CONFIG_POST */
diff --git a/board/bf537-stamp/spi_flash.c b/board/bf537-stamp/spi_flash.c
index 7c73ddd72..11a2803e6 100644
--- a/board/bf537-stamp/spi_flash.c
+++ b/board/bf537-stamp/spi_flash.c
@@ -412,7 +412,7 @@ void spi_init_f(void)
  */
 void spi_init_r(void)
 {
-#if defined(CONFIG_POST) && (CONFIG_POST & CFG_POST_SPI)
+#if defined(CONFIG_POST) && (CONFIG_POST & CONFIG_SYS_POST_SPI)
 	/* Our testing strategy here is pretty basic:
 	 *  - fill src memory with an 8-bit pattern
 	 *  - write the src memory to the SPI flash
diff --git a/board/bf537-stamp/u-boot.lds.S b/board/bf537-stamp/u-boot.lds.S
index 01780c570..187309f3f 100644
--- a/board/bf537-stamp/u-boot.lds.S
+++ b/board/bf537-stamp/u-boot.lds.S
@@ -36,7 +36,7 @@
  * for different CPU's which may lack non-cache L1 data.
  */
 #ifndef L1_DATA_B_SRAM
-# define L1_DATA_B_SRAM      CFG_MONITOR_BASE
+# define L1_DATA_B_SRAM      CONFIG_SYS_MONITOR_BASE
 # define L1_DATA_B_SRAM_SIZE 0
 #endif
 
@@ -45,7 +45,7 @@ OUTPUT_ARCH(bfin)
 /* The 0xC offset is so we don't clobber the tiny LDR jump block. */
 MEMORY
 {
-	ram     : ORIGIN = CFG_MONITOR_BASE, LENGTH = CFG_MONITOR_LEN
+	ram     : ORIGIN = CONFIG_SYS_MONITOR_BASE, LENGTH = CONFIG_SYS_MONITOR_LEN
 	l1_code : ORIGIN = L1_INST_SRAM+0xC, LENGTH = L1_INST_SRAM_SIZE
 	l1_data : ORIGIN = L1_DATA_B_SRAM,   LENGTH = L1_DATA_B_SRAM_SIZE
 }
@@ -54,6 +54,8 @@ SECTIONS
 {
 	.text :
 	{
+		cpu/blackfin/start.o (.text)
+
 #ifdef ENV_IS_EMBEDDED
 		/* WARNING - the following is hand-optimized to fit within
 		 * the sector before the environment sector. If it throws
@@ -61,7 +63,6 @@ SECTIONS
 		 * it linked after the configuration sector.
 		 */
 
-		cpu/blackfin/start.o		(.text)
 		cpu/blackfin/traps.o		(.text)
 		cpu/blackfin/interrupt.o	(.text)
 		cpu/blackfin/serial.o		(.text)
@@ -69,9 +70,13 @@ SECTIONS
 		lib_generic/crc32.o		(.text)
 
 		. = DEFINED(env_offset) ? env_offset : .;
-		common/environment.o	(.text)
+		common/env_embedded.o	(.text)
 #endif
 
+		__initcode_start = .;
+		cpu/blackfin/initcode.o (.text)
+		__initcode_end = .;
+
 		*(.text .text.*)
 	} >ram
 
diff --git a/board/bf561-ezkit/bf561-ezkit.c b/board/bf561-ezkit/bf561-ezkit.c
index 7345b42cb..7f8598c71 100644
--- a/board/bf561-ezkit/bf561-ezkit.c
+++ b/board/bf561-ezkit/bf561-ezkit.c
@@ -1,8 +1,7 @@
 /*
- * U-boot - ezkit561.c
+ * U-boot - main board file
  *
- * Copyright (c) 2005 Bas Vermeulen <bas@buyways.nl>
- * Copyright (c) 2005-2007 Analog Devices Inc.
+ * Copyright (c) 2005-2008 Analog Devices Inc.
  *
  * (C) Copyright 2000-2004
  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
@@ -33,7 +32,6 @@ DECLARE_GLOBAL_DATA_PTR;
 
 int checkboard(void)
 {
-	printf("CPU:   ADSP BF561\n");
 	printf("Board: ADI BF561 EZ-Kit Lite board\n");
 	printf("       Support: http://blackfin.uclinux.org/\n");
 	return 0;
@@ -50,25 +48,10 @@ phys_size_t initdram(int board_type)
 	printf("tRCD %d SCLK Cycles,tRP %d SCLK Cycles,tRAS %d SCLK Cycles"
 	       "tWR %d SCLK Cycles,CAS Latency %d SCLK cycles \n",
 	       3, 3, 6, 2, 3);
-	printf("SDRAM Begin: 0x%x\n", CFG_SDRAM_BASE);
-	printf("Bank size = %d MB\n", CFG_MAX_RAM_SIZE >> 20);
+	printf("SDRAM Begin: 0x%x\n", CONFIG_SYS_SDRAM_BASE);
+	printf("Bank size = %d MB\n", CONFIG_SYS_MAX_RAM_SIZE >> 20);
 #endif
-	gd->bd->bi_memstart = CFG_SDRAM_BASE;
-	gd->bd->bi_memsize = CFG_MAX_RAM_SIZE;
-	return CFG_MAX_RAM_SIZE;
+	gd->bd->bi_memstart = CONFIG_SYS_SDRAM_BASE;
+	gd->bd->bi_memsize = CONFIG_SYS_MAX_RAM_SIZE;
+	return CONFIG_SYS_MAX_RAM_SIZE;
 }
-
-#if defined(CONFIG_MISC_INIT_R)
-/* miscellaneous platform dependent initialisations */
-int misc_init_r(void)
-{
-	/* Keep PF12 low to be able to drive the USB-LAN Extender */
-	*pFIO0_DIR = 0x0000;
-	*pFIO0_FLAG_C = 0x1000;	/* Clear PF12 */
-	SSYNC();
-	*pFIO0_POLAR = 0x0000;
-	SSYNC();
-
-	return 0;
-}
-#endif
diff --git a/board/bf561-ezkit/u-boot.lds.S b/board/bf561-ezkit/u-boot.lds.S
index ddafdcb2a..99d6be634 100644
--- a/board/bf561-ezkit/u-boot.lds.S
+++ b/board/bf561-ezkit/u-boot.lds.S
@@ -36,7 +36,7 @@
  * for different CPU's which may lack non-cache L1 data.
  */
 #ifndef L1_DATA_B_SRAM
-# define L1_DATA_B_SRAM      CFG_MONITOR_BASE
+# define L1_DATA_B_SRAM      CONFIG_SYS_MONITOR_BASE
 # define L1_DATA_B_SRAM_SIZE 0
 #endif
 
@@ -45,7 +45,7 @@ OUTPUT_ARCH(bfin)
 /* The 0xC offset is so we don't clobber the tiny LDR jump block. */
 MEMORY
 {
-	ram     : ORIGIN = CFG_MONITOR_BASE, LENGTH = CFG_MONITOR_LEN
+	ram     : ORIGIN = CONFIG_SYS_MONITOR_BASE, LENGTH = CONFIG_SYS_MONITOR_LEN
 	l1_code : ORIGIN = L1_INST_SRAM+0xC, LENGTH = L1_INST_SRAM_SIZE
 	l1_data : ORIGIN = L1_DATA_B_SRAM,   LENGTH = L1_DATA_B_SRAM_SIZE
 }
@@ -54,6 +54,8 @@ SECTIONS
 {
 	.text :
 	{
+		cpu/blackfin/start.o (.text)
+
 #ifdef ENV_IS_EMBEDDED
 		/* WARNING - the following is hand-optimized to fit within
 		 * the sector before the environment sector. If it throws
@@ -61,7 +63,6 @@ SECTIONS
 		 * it linked after the configuration sector.
 		 */
 
-		cpu/blackfin/start.o		(.text)
 		cpu/blackfin/traps.o		(.text)
 		cpu/blackfin/interrupt.o	(.text)
 		cpu/blackfin/serial.o		(.text)
@@ -71,9 +72,13 @@ SECTIONS
 		board/bf561-ezkit/bf561-ezkit.o		(.text)
 
 		. = DEFINED(env_offset) ? env_offset : .;
-		common/environment.o	(.text)
+		common/env_embedded.o	(.text)
 #endif
 
+		__initcode_start = .;
+		cpu/blackfin/initcode.o (.text)
+		__initcode_end = .;
+
 		*(.text .text.*)
 	} >ram
 
diff --git a/board/bmw/README b/board/bmw/README
index 1f04b1b8a..1fbef79e6 100644
--- a/board/bmw/README
+++ b/board/bmw/README
@@ -62,26 +62,26 @@ IO/MMU (BAT) Configuration
 The following Block-Address-Translation (BAT) configuration
 is recommended to access all I/O devices.
 
-#define CFG_IBAT0L  (0x00000000 | BATL_PP_10 | BATL_MEMCOHERENCE)
-#define CFG_IBAT0U  (0x00000000 | BATU_BL_256M | BATU_VS | BATU_VP)
-
-#define CFG_IBAT1L  (0x70000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
-#define CFG_IBAT1U  (0x70000000 | BATU_BL_256M | BATU_VS | BATU_VP)
-
-#define CFG_IBAT2L  (0x80000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
-#define CFG_IBAT2U  (0x80000000 | BATU_BL_256M | BATU_VS | BATU_VP)
-
-#define CFG_IBAT3L  (0xF0000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
-#define CFG_IBAT3U  (0xF0000000 | BATU_BL_256M | BATU_VS | BATU_VP)
-
-#define CFG_DBAT0L  CFG_IBAT0L
-#define CFG_DBAT0U  CFG_IBAT0U
-#define CFG_DBAT1L  CFG_IBAT1L
-#define CFG_DBAT1U  CFG_IBAT1U
-#define CFG_DBAT2L  CFG_IBAT2L
-#define CFG_DBAT2U  CFG_IBAT2U
-#define CFG_DBAT3L  CFG_IBAT3L
-#define CFG_DBAT3U  CFG_IBAT3U
+#define CONFIG_SYS_IBAT0L  (0x00000000 | BATL_PP_10 | BATL_MEMCOHERENCE)
+#define CONFIG_SYS_IBAT0U  (0x00000000 | BATU_BL_256M | BATU_VS | BATU_VP)
+
+#define CONFIG_SYS_IBAT1L  (0x70000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
+#define CONFIG_SYS_IBAT1U  (0x70000000 | BATU_BL_256M | BATU_VS | BATU_VP)
+
+#define CONFIG_SYS_IBAT2L  (0x80000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
+#define CONFIG_SYS_IBAT2U  (0x80000000 | BATU_BL_256M | BATU_VS | BATU_VP)
+
+#define CONFIG_SYS_IBAT3L  (0xF0000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
+#define CONFIG_SYS_IBAT3U  (0xF0000000 | BATU_BL_256M | BATU_VS | BATU_VP)
+
+#define CONFIG_SYS_DBAT0L  CONFIG_SYS_IBAT0L
+#define CONFIG_SYS_DBAT0U  CONFIG_SYS_IBAT0U
+#define CONFIG_SYS_DBAT1L  CONFIG_SYS_IBAT1L
+#define CONFIG_SYS_DBAT1U  CONFIG_SYS_IBAT1U
+#define CONFIG_SYS_DBAT2L  CONFIG_SYS_IBAT2L
+#define CONFIG_SYS_DBAT2U  CONFIG_SYS_IBAT2U
+#define CONFIG_SYS_DBAT3L  CONFIG_SYS_IBAT3L
+#define CONFIG_SYS_DBAT3U  CONFIG_SYS_IBAT3U
 
 
 Interrupt Mappings
diff --git a/board/bmw/bmw.c b/board/bmw/bmw.c
index 043143163..41ce14f65 100644
--- a/board/bmw/bmw.c
+++ b/board/bmw/bmw.c
@@ -28,7 +28,7 @@
 #include <malloc.h>
 #include <devices.h>
 #include <net.h>
-#include <version.h>
+#include <timestamp.h>
 #include <dtt.h>
 #include <mpc824x.h>
 #include <asm/processor.h>
@@ -45,7 +45,7 @@ int checkboard(void)
     char  buf[32];
 
     puts ("Board: BMW MPC8245/KAHLUA2 - CHRP (MAP B)\n");
-    printf("Built: %s at %s\n", __DATE__ , __TIME__ );
+    printf("Built: %s at %s\n", U_BOOT_DATE, U_BOOT_TIME);
     /* printf("MPLD:  Revision %d\n", SYS_REVID_GET()); */
     printf("Local Bus at %s MHz\n", strmhz(buf, busfreq));
     return 0;
@@ -125,7 +125,7 @@ void doc_init (void)
     doc_probe(DOC_BASE_ADDR);
 }
 
-#define NV_ADDR	((volatile unsigned char *) CFG_ENV_ADDR)
+#define NV_ADDR	((volatile unsigned char *) CONFIG_ENV_ADDR)
 
 /* Read from NVRAM */
 void*
diff --git a/board/bmw/early_init.S b/board/bmw/early_init.S
index 57a06a91f..63c29d500 100644
--- a/board/bmw/early_init.S
+++ b/board/bmw/early_init.S
@@ -86,10 +86,10 @@ iommu_setup:
 /*
  *  Set up I/D BAT0
  */
-	lis     r4, CFG_DBAT0L@h
-	ori     r4, r4, CFG_DBAT0L@l
-	lis     r3, CFG_DBAT0U@h
-	ori     r3, r3, CFG_DBAT0U@l
+	lis     r4, CONFIG_SYS_DBAT0L@h
+	ori     r4, r4, CONFIG_SYS_DBAT0L@l
+	lis     r3, CONFIG_SYS_DBAT0U@h
+	ori     r3, r3, CONFIG_SYS_DBAT0U@l
 
 	mtdbat0l(r4)
 	isync
@@ -97,10 +97,10 @@ iommu_setup:
 	isync
 	sync
 
-	lis     r4, CFG_IBAT0L@h
-	ori     r4, r4, CFG_IBAT0L@l
-	lis     r3, CFG_IBAT0U@h
-	ori     r3, r3, CFG_IBAT0U@l
+	lis     r4, CONFIG_SYS_IBAT0L@h
+	ori     r4, r4, CONFIG_SYS_IBAT0L@l
+	lis     r3, CONFIG_SYS_IBAT0U@h
+	ori     r3, r3, CONFIG_SYS_IBAT0U@l
 
 	isync
 	mtibat0l(r4)
@@ -111,10 +111,10 @@ iommu_setup:
 /*
  *  Set up I/D BAT1
  */
-	lis     r4, CFG_IBAT1L@h
-	ori     r4, r4, CFG_IBAT1L@l
-	lis     r3, CFG_IBAT1U@h
-	ori     r3, r3, CFG_IBAT1U@l
+	lis     r4, CONFIG_SYS_IBAT1L@h
+	ori     r4, r4, CONFIG_SYS_IBAT1L@l
+	lis     r3, CONFIG_SYS_IBAT1U@h
+	ori     r3, r3, CONFIG_SYS_IBAT1U@l
 
 	isync
 	mtibat1l(r4)
@@ -130,10 +130,10 @@ iommu_setup:
 /*
  *  Set up I/D BAT2
  */
-	lis     r4, CFG_IBAT2L@h
-	ori     r4, r4, CFG_IBAT2L@l
-	lis     r3, CFG_IBAT2U@h
-	ori     r3, r3, CFG_IBAT2U@l
+	lis     r4, CONFIG_SYS_IBAT2L@h
+	ori     r4, r4, CONFIG_SYS_IBAT2L@l
+	lis     r3, CONFIG_SYS_IBAT2U@h
+	ori     r3, r3, CONFIG_SYS_IBAT2U@l
 
 	isync
 	mtibat2l(r4)
@@ -149,10 +149,10 @@ iommu_setup:
 /*
  *  Setup I/D BAT3
  */
-	lis     r4, CFG_IBAT3L@h
-	ori     r4, r4, CFG_IBAT3L@l
-	lis     r3, CFG_IBAT3U@h
-	ori     r3, r3, CFG_IBAT3U@l
+	lis     r4, CONFIG_SYS_IBAT3L@h
+	ori     r4, r4, CONFIG_SYS_IBAT3L@l
+	lis     r3, CONFIG_SYS_IBAT3U@h
+	ori     r3, r3, CONFIG_SYS_IBAT3U@l
 
 	isync
 	mtibat3l(r4)
@@ -466,7 +466,7 @@ X4_KAHLUA_START:
 
 	LOADPTR (r3, EUMBBAR)
 	stwbrx	r3,0,r5
-	LOADPTR (r4, CFG_EUMB_ADDR)
+	LOADPTR (r4, CONFIG_SYS_EUMB_ADDR)
 	stwbrx	r4,0,r6
 
 L1not8245:
diff --git a/board/bmw/flash.c b/board/bmw/flash.c
index 7fba174f4..57ffe0890 100644
--- a/board/bmw/flash.c
+++ b/board/bmw/flash.c
@@ -29,17 +29,17 @@
 #define ROM_CS0_START	0xFF800000
 #define ROM_CS1_START	0xFF000000
 
-flash_info_t flash_info[CFG_MAX_FLASH_BANKS];	/* info for FLASH chips    */
+flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];	/* info for FLASH chips    */
 
-#if defined(CFG_ENV_IS_IN_FLASH)
-# ifndef  CFG_ENV_ADDR
-#  define CFG_ENV_ADDR  (CFG_FLASH_BASE + CFG_ENV_OFFSET)
+#if defined(CONFIG_ENV_IS_IN_FLASH)
+# ifndef  CONFIG_ENV_ADDR
+#  define CONFIG_ENV_ADDR  (CONFIG_SYS_FLASH_BASE + CONFIG_ENV_OFFSET)
 # endif
-# ifndef  CFG_ENV_SIZE
-#  define CFG_ENV_SIZE  CFG_ENV_SECT_SIZE
+# ifndef  CONFIG_ENV_SIZE
+#  define CONFIG_ENV_SIZE  CONFIG_ENV_SECT_SIZE
 # endif
-# ifndef  CFG_ENV_SECT_SIZE
-#  define CFG_ENV_SECT_SIZE  CFG_ENV_SIZE
+# ifndef  CONFIG_ENV_SECT_SIZE
+#  define CONFIG_ENV_SECT_SIZE  CONFIG_ENV_SIZE
 # endif
 #endif
 
@@ -141,10 +141,10 @@ unsigned long flash_init (void)
 {
 	unsigned long i;
 	unsigned char j;
-	static const ulong flash_banks[] = CFG_FLASH_BANKS;
+	static const ulong flash_banks[] = CONFIG_SYS_FLASH_BANKS;
 
 	/* Init: no FLASHes known */
-	for (i = 0; i < CFG_MAX_FLASH_BANKS; i++) {
+	for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) {
 		flash_info_t *const pflinfo = &flash_info[i];
 
 		pflinfo->flash_id = FLASH_UNKNOWN;
@@ -217,17 +217,17 @@ unsigned long flash_init (void)
 		}
 		/* Protect monitor and environment sectors
 		 */
-#if CFG_MONITOR_BASE >= CFG_FLASH_BASE
+#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE
 		flash_protect (FLAG_PROTECT_SET,
-			       CFG_MONITOR_BASE,
-			       CFG_MONITOR_BASE + monitor_flash_len - 1,
+			       CONFIG_SYS_MONITOR_BASE,
+			       CONFIG_SYS_MONITOR_BASE + monitor_flash_len - 1,
 			       &flash_info[0]);
 #endif
 
-#if (CFG_ENV_IS_IN_FLASH == 1) && defined(CFG_ENV_ADDR)
+#if defined(CONFIG_ENV_IS_IN_FLASH) && defined(CONFIG_ENV_ADDR)
 		flash_protect (FLAG_PROTECT_SET,
-			       CFG_ENV_ADDR,
-			       CFG_ENV_ADDR + CFG_ENV_SIZE - 1,
+			       CONFIG_ENV_ADDR,
+			       CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1,
 			       &flash_info[0]);
 #endif
 
@@ -627,7 +627,7 @@ int flash_erase (flash_info_t * info, int s_first, int s_last)
 						       start[0]) << sh8b));
 	while ((addr[0] & (FLASH_WORD_SIZE) 0x00800080) !=
 	       (FLASH_WORD_SIZE) 0x00800080) {
-		if ((now = get_timer (start)) > CFG_FLASH_ERASE_TOUT) {
+		if ((now = get_timer (start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
 			printf ("Timeout\n");
 			return 1;
 		}
@@ -766,7 +766,7 @@ static int write_word (flash_info_t * info, ulong dest, ulong data)
 		start = get_timer (0);
 		while ((dest2[i << sh8b] & (FLASH_WORD_SIZE) 0x00800080) !=
 		       (data2[i] & (FLASH_WORD_SIZE) 0x00800080)) {
-			if (get_timer (start) > CFG_FLASH_WRITE_TOUT) {
+			if (get_timer (start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
 				return (1);
 			}
 		}
diff --git a/board/bmw/m48t59y.c b/board/bmw/m48t59y.c
index a1a85d0fc..4e83b9076 100644
--- a/board/bmw/m48t59y.c
+++ b/board/bmw/m48t59y.c
@@ -299,8 +299,7 @@ rtc_get( struct rtc_time *tmp )
 	return 0;
 }
 
-void
-rtc_set( struct rtc_time *tmp )
+int rtc_set( struct rtc_time *tmp )
 {
 	m48_tod_set(tmp->tm_year,		/* 1980-2079 */
 		    tmp->tm_mon,		/* 01-12 */
@@ -315,6 +314,7 @@ rtc_set( struct rtc_time *tmp )
 		tmp->tm_hour, tmp->tm_min, tmp->tm_sec);
 #endif
 
+	return 0;
 }
 
 void
diff --git a/board/bmw/ns16550.c b/board/bmw/ns16550.c
index 706456724..725059103 100644
--- a/board/bmw/ns16550.c
+++ b/board/bmw/ns16550.c
@@ -1,7 +1,7 @@
 /*
  * COM1 NS16550 support
  * originally from linux source (arch/ppc/boot/ns16550.c)
- * modified to use CFG_ISA_MEM and new defines
+ * modified to use CONFIG_SYS_ISA_MEM and new defines
  */
 
 #include <config.h>
@@ -10,8 +10,8 @@
 typedef struct NS16550 *NS16550_t;
 
 const NS16550_t COM_PORTS[] =
-	{ (NS16550_t) ((CFG_EUMB_ADDR) + 0x4500),
-(NS16550_t) ((CFG_EUMB_ADDR) + 0x4600) };
+	{ (NS16550_t) ((CONFIG_SYS_EUMB_ADDR) + 0x4500),
+(NS16550_t) ((CONFIG_SYS_EUMB_ADDR) + 0x4600) };
 
 volatile struct NS16550 *NS16550_init (int chan, int baud_divisor)
 {
diff --git a/board/bmw/ns16550.h b/board/bmw/ns16550.h
index 104f45bfb..210aea4b2 100644
--- a/board/bmw/ns16550.h
+++ b/board/bmw/ns16550.h
@@ -2,7 +2,7 @@
  * NS16550 Serial Port
  * originally from linux source (arch/ppc/boot/ns16550.h)
  * modified slightly to
- * have addresses as offsets from CFG_ISA_BASE
+ * have addresses as offsets from CONFIG_SYS_ISA_BASE
  * added a few more definitions
  * added prototypes for ns16550.c
  * reduced no of com ports to 2
diff --git a/board/bmw/serial.c b/board/bmw/serial.c
index 712a95b19..0c97f1288 100644
--- a/board/bmw/serial.c
+++ b/board/bmw/serial.c
@@ -28,10 +28,10 @@ DECLARE_GLOBAL_DATA_PTR;
 
 #if CONFIG_CONS_INDEX == 1
 static struct NS16550 *console =
-		(struct NS16550 *) (CFG_EUMB_ADDR + 0x4500);
+		(struct NS16550 *) (CONFIG_SYS_EUMB_ADDR + 0x4500);
 #elif CONFIG_CONS_INDEX == 2
 static struct NS16550 *console =
-		(struct NS16550 *) (CFG_EUMB_ADDR + 0x4500);
+		(struct NS16550 *) (CONFIG_SYS_EUMB_ADDR + 0x4500);
 #else
 #error no valid console defined
 #endif
diff --git a/board/c2mon/c2mon.c b/board/c2mon/c2mon.c
index 7d2f746f4..717a64bb8 100644
--- a/board/c2mon/c2mon.c
+++ b/board/c2mon/c2mon.c
@@ -110,7 +110,7 @@ int checkboard (void)
 
 phys_size_t initdram (int board_type)
 {
-	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
 	volatile memctl8xx_t *memctl = &immap->im_memctl;
 	unsigned long reg;
 	long int size8, size9;
@@ -124,17 +124,17 @@ phys_size_t initdram (int board_type)
 	 * with two SDRAM banks or four cycles every 31.2 us with one
 	 * bank. It will be adjusted after memory sizing.
 	 */
-	memctl->memc_mptpr = CFG_MPTPR_2BK_8K;
+	memctl->memc_mptpr = CONFIG_SYS_MPTPR_2BK_8K;
 
 	memctl->memc_mar = 0x00000088;
 
 	/*
 	 * Map controller bank 2 the SDRAM bank 2 at physical address 0.
 	 */
-	memctl->memc_or2 = CFG_OR2_PRELIM;
-	memctl->memc_br2 = CFG_BR2_PRELIM;
+	memctl->memc_or2 = CONFIG_SYS_OR2_PRELIM;
+	memctl->memc_br2 = CONFIG_SYS_BR2_PRELIM;
 
-	memctl->memc_mamr = CFG_MAMR_8COL & (~(MAMR_PTAE));	/* no refresh yet */
+	memctl->memc_mamr = CONFIG_SYS_MAMR_8COL & (~(MAMR_PTAE));	/* no refresh yet */
 
 	udelay (200);
 
@@ -154,7 +154,7 @@ phys_size_t initdram (int board_type)
 	 *
 	 * try 8 column mode
 	 */
-	size8 = dram_size (CFG_MAMR_8COL,
+	size8 = dram_size (CONFIG_SYS_MAMR_8COL,
 			   SDRAM_BASE2_PRELIM,
 			   SDRAM_MAX_SIZE);
 
@@ -163,7 +163,7 @@ phys_size_t initdram (int board_type)
 	/*
 	 * try 9 column mode
 	 */
-	size9 = dram_size (CFG_MAMR_9COL,
+	size9 = dram_size (CONFIG_SYS_MAMR_9COL,
 			   SDRAM_BASE2_PRELIM,
 			   SDRAM_MAX_SIZE);
 
@@ -172,7 +172,7 @@ phys_size_t initdram (int board_type)
 /*		debug ("SDRAM Bank 0 in 9 column mode: %ld MB\n", size >> 20);	*/
 	} else {			/* back to 8 columns            */
 		size = size8;
-		memctl->memc_mamr = CFG_MAMR_8COL;
+		memctl->memc_mamr = CONFIG_SYS_MAMR_8COL;
 		udelay (500);
 /*		debug ("SDRAM Bank 0 in 8 column mode: %ld MB\n", size >> 20);	*/
 	}
@@ -185,15 +185,15 @@ phys_size_t initdram (int board_type)
 	 */
 	if (size < 0x02000000) {
 		/* reduce to 15.6 us (62.4 us / quad) */
-		memctl->memc_mptpr = CFG_MPTPR_2BK_4K;
+		memctl->memc_mptpr = CONFIG_SYS_MPTPR_2BK_4K;
 		udelay (1000);
 	}
 
 	/*
 	 * Final mapping
 	 */
-	memctl->memc_or2 = ((-size) & 0xFFFF0000) | CFG_OR_TIMING_SDRAM;
-	memctl->memc_br2 = (CFG_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V;
+	memctl->memc_or2 = ((-size) & 0xFFFF0000) | CONFIG_SYS_OR_TIMING_SDRAM;
+	memctl->memc_br2 = (CONFIG_SYS_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V;
 
 	/*
 	 * No bank 1
@@ -204,7 +204,7 @@ phys_size_t initdram (int board_type)
 
 	/* adjust refresh rate depending on SDRAM type, one bank */
 	reg = memctl->memc_mptpr;
-	reg >>= 1;			/* reduce to CFG_MPTPR_1BK_8K / _4K */
+	reg >>= 1;			/* reduce to CONFIG_SYS_MPTPR_1BK_8K / _4K */
 	memctl->memc_mptpr = reg;
 
 	udelay (10000);
@@ -225,7 +225,7 @@ phys_size_t initdram (int board_type)
 static long int dram_size (long int mamr_value, long int *base,
 						   long int maxsize)
 {
-	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
 	volatile memctl8xx_t *memctl = &immap->im_memctl;
 
 	memctl->memc_mamr = mamr_value;
diff --git a/board/c2mon/flash.c b/board/c2mon/flash.c
index b2be21c68..d33cb6ce4 100644
--- a/board/c2mon/flash.c
+++ b/board/c2mon/flash.c
@@ -24,11 +24,11 @@
 #include <common.h>
 #include <mpc8xx.h>
 
-#ifndef	CFG_ENV_ADDR
-#define CFG_ENV_ADDR	(CFG_FLASH_BASE + CFG_ENV_OFFSET)
+#ifndef	CONFIG_ENV_ADDR
+#define CONFIG_ENV_ADDR	(CONFIG_SYS_FLASH_BASE + CONFIG_ENV_OFFSET)
 #endif
 
-flash_info_t	flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips	*/
+flash_info_t	flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips	*/
 
 /*-----------------------------------------------------------------------
  * Functions
@@ -42,13 +42,13 @@ static void flash_get_offsets (ulong base, flash_info_t *info);
 
 unsigned long flash_init (void)
 {
-	volatile immap_t     *immap  = (immap_t *)CFG_IMMR;
+	volatile immap_t     *immap  = (immap_t *)CONFIG_SYS_IMMR;
 	volatile memctl8xx_t *memctl = &immap->im_memctl;
 	unsigned long size_b0, size_b1;
 	int i;
 
 	/* Init: no FLASHes known */
-	for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) {
+	for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
 		flash_info[i].flash_id = FLASH_UNKNOWN;
 	}
 
@@ -79,54 +79,54 @@ unsigned long flash_init (void)
 	}
 
 	/* Remap FLASH according to real size */
-	memctl->memc_or0 = CFG_OR_TIMING_FLASH | (-size_b0 & OR_AM_MSK);
-	memctl->memc_br0 = (CFG_FLASH_BASE & BR_BA_MSK) | BR_MS_GPCM | BR_V;
+	memctl->memc_or0 = CONFIG_SYS_OR_TIMING_FLASH | (-size_b0 & OR_AM_MSK);
+	memctl->memc_br0 = (CONFIG_SYS_FLASH_BASE & BR_BA_MSK) | BR_MS_GPCM | BR_V;
 
 	/* Re-do sizing to get full correct info */
-	size_b0 = flash_get_size((vu_long *)CFG_FLASH_BASE, &flash_info[0]);
+	size_b0 = flash_get_size((vu_long *)CONFIG_SYS_FLASH_BASE, &flash_info[0]);
 
-	flash_get_offsets (CFG_FLASH_BASE, &flash_info[0]);
+	flash_get_offsets (CONFIG_SYS_FLASH_BASE, &flash_info[0]);
 
-#if CFG_MONITOR_BASE >= CFG_FLASH_BASE
+#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE
 	/* monitor protection ON by default */
 	flash_protect(FLAG_PROTECT_SET,
-		      CFG_MONITOR_BASE,
-		      CFG_MONITOR_BASE+monitor_flash_len-1,
+		      CONFIG_SYS_MONITOR_BASE,
+		      CONFIG_SYS_MONITOR_BASE+monitor_flash_len-1,
 		      &flash_info[0]);
 #endif
 
-#ifdef	CFG_ENV_IS_IN_FLASH
+#ifdef	CONFIG_ENV_IS_IN_FLASH
 	/* ENV protection ON by default */
 	flash_protect(FLAG_PROTECT_SET,
-		      CFG_ENV_ADDR,
-		      CFG_ENV_ADDR+CFG_ENV_SIZE-1,
+		      CONFIG_ENV_ADDR,
+		      CONFIG_ENV_ADDR+CONFIG_ENV_SIZE-1,
 		      &flash_info[0]);
 #endif
 
 	if (size_b1) {
-		memctl->memc_or1 = CFG_OR_TIMING_FLASH | (-size_b1 & 0xFFFF8000);
-		memctl->memc_br1 = ((CFG_FLASH_BASE + size_b0) & BR_BA_MSK) |
+		memctl->memc_or1 = CONFIG_SYS_OR_TIMING_FLASH | (-size_b1 & 0xFFFF8000);
+		memctl->memc_br1 = ((CONFIG_SYS_FLASH_BASE + size_b0) & BR_BA_MSK) |
 				    BR_MS_GPCM | BR_V;
 
 		/* Re-do sizing to get full correct info */
-		size_b1 = flash_get_size((vu_long *)(CFG_FLASH_BASE + size_b0),
+		size_b1 = flash_get_size((vu_long *)(CONFIG_SYS_FLASH_BASE + size_b0),
 					  &flash_info[1]);
 
-		flash_get_offsets (CFG_FLASH_BASE + size_b0, &flash_info[1]);
+		flash_get_offsets (CONFIG_SYS_FLASH_BASE + size_b0, &flash_info[1]);
 
-#if CFG_MONITOR_BASE >= CFG_FLASH_BASE
+#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE
 		/* monitor protection ON by default */
 		flash_protect(FLAG_PROTECT_SET,
-			      CFG_MONITOR_BASE,
-			      CFG_MONITOR_BASE+monitor_flash_len-1,
+			      CONFIG_SYS_MONITOR_BASE,
+			      CONFIG_SYS_MONITOR_BASE+monitor_flash_len-1,
 			      &flash_info[1]);
 #endif
 
-#ifdef	CFG_ENV_IS_IN_FLASH
+#ifdef	CONFIG_ENV_IS_IN_FLASH
 		/* ENV protection ON by default */
 		flash_protect(FLAG_PROTECT_SET,
-			      CFG_ENV_ADDR,
-			      CFG_ENV_ADDR+CFG_ENV_SIZE-1,
+			      CONFIG_ENV_ADDR,
+			      CONFIG_ENV_ADDR+CONFIG_ENV_SIZE-1,
 			      &flash_info[1]);
 #endif
 	} else {
@@ -436,7 +436,7 @@ int	flash_erase (flash_info_t *info, int s_first, int s_last)
 	last  = start;
 	addr = (vu_long*)(info->start[l_sect]);
 	while ((addr[0] & 0x00800080) != 0x00800080) {
-		if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+		if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
 			printf ("Timeout\n");
 			return 1;
 		}
@@ -559,7 +559,7 @@ static int write_word (flash_info_t *info, ulong dest, ulong data)
 	/* data polling for D7 */
 	start = get_timer (0);
 	while ((*((vu_long *)dest) & 0x00800080) != (data & 0x00800080)) {
-		if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+		if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
 			return (1);
 		}
 	}
diff --git a/board/c2mon/pcmcia.c b/board/c2mon/pcmcia.c
index 57846b10c..c833b20b7 100644
--- a/board/c2mon/pcmcia.c
+++ b/board/c2mon/pcmcia.c
@@ -22,8 +22,8 @@ static void cfg_ports (void)
 	volatile cpm8xx_t	*cp;
 	ushort sreg;
 
-	immap = (immap_t *)CFG_IMMR;
-	cp    = (cpm8xx_t *)(&(((immap_t *)CFG_IMMR)->im_cpm));
+	immap = (immap_t *)CONFIG_SYS_IMMR;
+	cp    = (cpm8xx_t *)(&(((immap_t *)CONFIG_SYS_IMMR)->im_cpm));
 
 	/*
 	* Configure Port C for TPS2211 PC-Card Power-Interface Switch
@@ -69,10 +69,10 @@ int pcmcia_hardware_enable(int slot)
 
 	udelay(10000);
 
-	immap = (immap_t *)CFG_IMMR;
-	sysp  = (sysconf8xx_t *)(&(((immap_t *)CFG_IMMR)->im_siu_conf));
-	pcmp  = (pcmconf8xx_t *)(&(((immap_t *)CFG_IMMR)->im_pcmcia));
-	cp    = (cpm8xx_t *)(&(((immap_t *)CFG_IMMR)->im_cpm));
+	immap = (immap_t *)CONFIG_SYS_IMMR;
+	sysp  = (sysconf8xx_t *)(&(((immap_t *)CONFIG_SYS_IMMR)->im_siu_conf));
+	pcmp  = (pcmconf8xx_t *)(&(((immap_t *)CONFIG_SYS_IMMR)->im_pcmcia));
+	cp    = (cpm8xx_t *)(&(((immap_t *)CONFIG_SYS_IMMR)->im_cpm));
 
 	/* Configure Ports for TPS2211A PC-Card Power-Interface Switch */
 	cfg_ports ();
@@ -175,8 +175,8 @@ int pcmcia_hardware_disable(int slot)
 
 	debug ("hardware_disable: " PCMCIA_BOARD_MSG " Slot %c\n", 'A'+slot);
 
-	immap = (immap_t *)CFG_IMMR;
-	pcmp  = (pcmconf8xx_t *)(&(((immap_t *)CFG_IMMR)->im_pcmcia));
+	immap = (immap_t *)CONFIG_SYS_IMMR;
+	pcmp  = (pcmconf8xx_t *)(&(((immap_t *)CONFIG_SYS_IMMR)->im_pcmcia));
 
 	/* Configure PCMCIA General Control Register */
 	debug ("Disable PCMCIA buffers and assert RESET\n");
@@ -209,9 +209,9 @@ int pcmcia_voltage_set(int slot, int vcc, int vpp)
 			" Slot %c, Vcc=%d.%d, Vpp=%d.%d\n",
 	'A'+slot, vcc/10, vcc%10, vpp/10, vcc%10);
 
-	immap = (immap_t *)CFG_IMMR;
-	cp    = (cpm8xx_t *)(&(((immap_t *)CFG_IMMR)->im_cpm));
-	pcmp  = (pcmconf8xx_t *)(&(((immap_t *)CFG_IMMR)->im_pcmcia));
+	immap = (immap_t *)CONFIG_SYS_IMMR;
+	cp    = (cpm8xx_t *)(&(((immap_t *)CONFIG_SYS_IMMR)->im_cpm));
+	pcmp  = (pcmconf8xx_t *)(&(((immap_t *)CONFIG_SYS_IMMR)->im_pcmcia));
 	/*
 	* Disable PCMCIA buffers (isolate the interface)
 	* and assert RESET signal
diff --git a/board/c2mon/u-boot.lds b/board/c2mon/u-boot.lds
index 10b38ec35..ef9a2515c 100644
--- a/board/c2mon/u-boot.lds
+++ b/board/c2mon/u-boot.lds
@@ -63,7 +63,7 @@ SECTIONS
     lib_generic/zlib.o		(.text)
 
     . = env_offset;
-    common/environment.o(.text)
+    common/env_embedded.o(.text)
 
     *(.text)
     *(.fixup)
@@ -134,6 +134,7 @@ SECTIONS
    *(.dynbss)
    *(.bss)
    *(COMMON)
+   . = ALIGN(4);
   }
   _end = . ;
   PROVIDE (end = .);
diff --git a/board/c2mon/u-boot.lds.debug b/board/c2mon/u-boot.lds.debug
index 85072feda..dbec9860a 100644
--- a/board/c2mon/u-boot.lds.debug
+++ b/board/c2mon/u-boot.lds.debug
@@ -61,7 +61,7 @@ SECTIONS
     lib_generic/crc32.o		(.text)
 
     . = env_offset;
-    common/environment.o(.text)
+    common/env_embedded.o(.text)
 
     *(.text)
     *(.fixup)
diff --git a/board/canmb/canmb.c b/board/canmb/canmb.c
index d3711d077..dce07bf78 100644
--- a/board/canmb/canmb.c
+++ b/board/canmb/canmb.c
@@ -34,7 +34,7 @@
 #include "mt48lc16m32s2-75.h"
 #endif
 
-#ifndef CFG_RAMBOOT
+#ifndef CONFIG_SYS_RAMBOOT
 static void sdram_start (int hi_addr)
 {
 	long hi_addr_bit = hi_addr ? 0x01000000 : 0;
@@ -77,7 +77,7 @@ static void sdram_start (int hi_addr)
 
 /*
  * ATTENTION: Although partially referenced initdram does NOT make real use
- *            use of CFG_SDRAM_BASE. The code does not work if CFG_SDRAM_BASE
+ *            use of CONFIG_SYS_SDRAM_BASE. The code does not work if CONFIG_SYS_SDRAM_BASE
  *            is something else than 0x00000000.
  */
 
@@ -86,7 +86,7 @@ phys_size_t initdram (int board_type)
 {
 	ulong dramsize = 0;
 	ulong dramsize2 = 0;
-#ifndef CFG_RAMBOOT
+#ifndef CONFIG_SYS_RAMBOOT
 	ulong test1, test2;
 
 	/* setup SDRAM chip selects */
@@ -107,9 +107,9 @@ phys_size_t initdram (int board_type)
 
 	/* find RAM size using SDRAM CS0 only */
 	sdram_start(0);
-	test1 = get_ram_size((ulong *)CFG_SDRAM_BASE, 0x80000000);
+	test1 = get_ram_size((ulong *)CONFIG_SYS_SDRAM_BASE, 0x80000000);
 	sdram_start(1);
-	test2 = get_ram_size((ulong *)CFG_SDRAM_BASE, 0x80000000);
+	test2 = get_ram_size((ulong *)CONFIG_SYS_SDRAM_BASE, 0x80000000);
 	if (test1 > test2) {
 		sdram_start(0);
 		dramsize = test1;
@@ -135,10 +135,10 @@ phys_size_t initdram (int board_type)
 	/* find RAM size using SDRAM CS1 only */
 	if (!dramsize)
 		sdram_start(0);
-	test2 = test1 = get_ram_size((ulong *)(CFG_SDRAM_BASE + dramsize), 0x80000000);
+	test2 = test1 = get_ram_size((ulong *)(CONFIG_SYS_SDRAM_BASE + dramsize), 0x80000000);
 	if (!dramsize) {
 		sdram_start(1);
-		test2 = get_ram_size((ulong *)(CFG_SDRAM_BASE + dramsize), 0x80000000);
+		test2 = get_ram_size((ulong *)(CONFIG_SYS_SDRAM_BASE + dramsize), 0x80000000);
 	}
 	if (test1 > test2) {
 		sdram_start(0);
@@ -160,7 +160,7 @@ phys_size_t initdram (int board_type)
 		*(vu_long *)MPC5XXX_SDRAM_CS1CFG = dramsize; /* disabled */
 	}
 
-#else /* CFG_RAMBOOT */
+#else /* CONFIG_SYS_RAMBOOT */
 
 	/* retrieve size of memory connected to SDRAM CS0 */
 	dramsize = *(vu_long *)MPC5XXX_SDRAM_CS0CFG & 0xFF;
@@ -178,7 +178,7 @@ phys_size_t initdram (int board_type)
 		dramsize2 = 0;
 	}
 
-#endif /* CFG_RAMBOOT */
+#endif /* CONFIG_SYS_RAMBOOT */
 
 	return dramsize + dramsize2;
 }
@@ -188,7 +188,7 @@ phys_size_t initdram (int board_type)
 phys_size_t initdram (int board_type)
 {
 	ulong dramsize = 0;
-#ifndef CFG_RAMBOOT
+#ifndef CONFIG_SYS_RAMBOOT
 	ulong test1, test2;
 
 	/* setup and enable SDRAM chip selects */
@@ -207,9 +207,9 @@ phys_size_t initdram (int board_type)
 
 	/* find RAM size */
 	sdram_start(0);
-	test1 = get_ram_size((ulong *)CFG_SDRAM_BASE, 0x80000000);
+	test1 = get_ram_size((ulong *)CONFIG_SYS_SDRAM_BASE, 0x80000000);
 	sdram_start(1);
-	test2 = get_ram_size((ulong *)CFG_SDRAM_BASE, 0x80000000);
+	test2 = get_ram_size((ulong *)CONFIG_SYS_SDRAM_BASE, 0x80000000);
 	if (test1 > test2) {
 		sdram_start(0);
 		dramsize = test1;
@@ -220,12 +220,12 @@ phys_size_t initdram (int board_type)
 	/* set SDRAM end address according to size */
 	*(vu_long *)MPC5XXX_SDRAM_STOP = ((dramsize - 1) >> 15);
 
-#else /* CFG_RAMBOOT */
+#else /* CONFIG_SYS_RAMBOOT */
 
 	/* Retrieve amount of SDRAM available */
 	dramsize = ((*(vu_long *)MPC5XXX_SDRAM_STOP + 1) << 15);
 
-#endif /* CFG_RAMBOOT */
+#endif /* CONFIG_SYS_RAMBOOT */
 
 	return dramsize;
 }
@@ -244,8 +244,8 @@ int board_early_init_r (void)
 {
 	*(vu_long *)MPC5XXX_BOOTCS_CFG &= ~0x1; /* clear RO */
 	*(vu_long *)MPC5XXX_BOOTCS_START =
-	*(vu_long *)MPC5XXX_CS0_START = START_REG(CFG_FLASH_BASE);
+	*(vu_long *)MPC5XXX_CS0_START = START_REG(CONFIG_SYS_FLASH_BASE);
 	*(vu_long *)MPC5XXX_BOOTCS_STOP =
-	*(vu_long *)MPC5XXX_CS0_STOP = STOP_REG(CFG_FLASH_BASE, CFG_FLASH_SIZE);
+	*(vu_long *)MPC5XXX_CS0_STOP = STOP_REG(CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_SIZE);
 	return 0;
 }
diff --git a/board/cerf250/flash.c b/board/cerf250/flash.c
index ba82892dd..a4b201e01 100644
--- a/board/cerf250/flash.c
+++ b/board/cerf250/flash.c
@@ -28,7 +28,7 @@
 #include <linux/byteorder/swab.h>
 
 
-flash_info_t flash_info[CFG_MAX_FLASH_BANKS];	/* info for FLASH chips    */
+flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];	/* info for FLASH chips    */
 
 /* Board support for 1 or 2 flash devices */
 #define FLASH_PORT_WIDTH32
@@ -65,7 +65,7 @@ unsigned long flash_init (void)
 	int i;
 	ulong size = 0;
 
-	for (i = 0; i < CFG_MAX_FLASH_BANKS; i++) {
+	for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) {
 		switch (i) {
 		case 0:
 			flash_get_size ((FPW *) PHYS_FLASH_1, &flash_info[i]);
@@ -85,13 +85,13 @@ unsigned long flash_init (void)
 	/* Protect monitor and environment sectors
 	 */
 	flash_protect ( FLAG_PROTECT_SET,
-			CFG_FLASH_BASE,
-			CFG_FLASH_BASE + monitor_flash_len - 1,
+			CONFIG_SYS_FLASH_BASE,
+			CONFIG_SYS_FLASH_BASE + monitor_flash_len - 1,
 			&flash_info[0] );
 
 	flash_protect ( FLAG_PROTECT_SET,
-			CFG_ENV_ADDR,
-			CFG_ENV_ADDR + CFG_ENV_SIZE - 1, &flash_info[0] );
+			CONFIG_ENV_ADDR,
+			CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1, &flash_info[0] );
 
 	return size;
 }
@@ -203,10 +203,10 @@ static ulong flash_get_size (FPW *addr, flash_info_t *info)
 		break;
 	}
 
-	if (info->sector_count > CFG_MAX_FLASH_SECT) {
+	if (info->sector_count > CONFIG_SYS_MAX_FLASH_SECT) {
 		printf ("** ERROR: sector count %d > max (%d) **\n",
-			info->sector_count, CFG_MAX_FLASH_SECT);
-		info->sector_count = CFG_MAX_FLASH_SECT;
+			info->sector_count, CONFIG_SYS_MAX_FLASH_SECT);
+		info->sector_count = CONFIG_SYS_MAX_FLASH_SECT;
 	}
 
 	addr[0] = (FPW) 0x00FF00FF;		/* restore read mode */
@@ -276,7 +276,7 @@ int flash_erase (flash_info_t *info, int s_first, int s_last)
 			*addr = (FPW) 0x00D000D0;	/* erase confirm */
 
 			while (((status = *addr) & (FPW) 0x00800080) != (FPW) 0x00800080) {
-				if (get_timer_masked () > CFG_FLASH_ERASE_TOUT) {
+				if (get_timer_masked () > CONFIG_SYS_FLASH_ERASE_TOUT) {
 					printf ("Timeout\n");
 					*addr = (FPW) 0x00B000B0;	/* suspend erase     */
 					*addr = (FPW) 0x00FF00FF;	/* reset to read mode */
@@ -410,7 +410,7 @@ static int write_data (flash_info_t *info, ulong dest, FPW data)
 
 	/* wait while polling the status register */
 	while (((status = *addr) & (FPW) 0x00800080) != (FPW) 0x00800080) {
-		if (get_timer_masked () > CFG_FLASH_WRITE_TOUT) {
+		if (get_timer_masked () > CONFIG_SYS_FLASH_WRITE_TOUT) {
 			*addr = (FPW) 0x00FF00FF;	/* restore read mode */
 			return (1);
 		}
diff --git a/board/cerf250/lowlevel_init.S b/board/cerf250/lowlevel_init.S
index ad3c59f9f..5bfe53c72 100644
--- a/board/cerf250/lowlevel_init.S
+++ b/board/cerf250/lowlevel_init.S
@@ -29,7 +29,7 @@
 #include <version.h>
 #include <asm/arch/pxa-regs.h>
 
-DRAM_SIZE:  .long   CFG_DRAM_SIZE
+DRAM_SIZE:  .long   CONFIG_SYS_DRAM_SIZE
 
 /* wait for coprocessor write complete */
    .macro CPWAIT reg
@@ -49,67 +49,67 @@ lowlevel_init:
 	/* Set up GPIO pins first ----------------------------------------- */
 
 	ldr	r0, =GPSR0
-	ldr	r1, =CFG_GPSR0_VAL
+	ldr	r1, =CONFIG_SYS_GPSR0_VAL
 	str	r1, [r0]
 
 	ldr	r0, =GPSR1
-	ldr	r1, =CFG_GPSR1_VAL
+	ldr	r1, =CONFIG_SYS_GPSR1_VAL
 	str	r1, [r0]
 
 	ldr	r0, =GPSR2
-	ldr	r1, =CFG_GPSR2_VAL
+	ldr	r1, =CONFIG_SYS_GPSR2_VAL
 	str	r1, [r0]
 
 	ldr	r0, =GPCR0
-	ldr	r1, =CFG_GPCR0_VAL
+	ldr	r1, =CONFIG_SYS_GPCR0_VAL
 	str	r1, [r0]
 
 	ldr	r0, =GPCR1
-	ldr	r1, =CFG_GPCR1_VAL
+	ldr	r1, =CONFIG_SYS_GPCR1_VAL
 	str	r1, [r0]
 
 	ldr	r0, =GPCR2
-	ldr	r1, =CFG_GPCR2_VAL
+	ldr	r1, =CONFIG_SYS_GPCR2_VAL
 	str	r1, [r0]
 
 	ldr	r0, =GPDR0
-	ldr	r1, =CFG_GPDR0_VAL
+	ldr	r1, =CONFIG_SYS_GPDR0_VAL
 	str	r1, [r0]
 
 	ldr	r0, =GPDR1
-	ldr	r1, =CFG_GPDR1_VAL
+	ldr	r1, =CONFIG_SYS_GPDR1_VAL
 	str	r1, [r0]
 
 	ldr	r0, =GPDR2
-	ldr	r1, =CFG_GPDR2_VAL
+	ldr	r1, =CONFIG_SYS_GPDR2_VAL
 	str	r1, [r0]
 
 	ldr	r0, =GAFR0_L
-	ldr	r1, =CFG_GAFR0_L_VAL
+	ldr	r1, =CONFIG_SYS_GAFR0_L_VAL
 	str	r1, [r0]
 
 	ldr	r0, =GAFR0_U
-	ldr	r1, =CFG_GAFR0_U_VAL
+	ldr	r1, =CONFIG_SYS_GAFR0_U_VAL
 	str	r1, [r0]
 
 	ldr	r0, =GAFR1_L
-	ldr	r1, =CFG_GAFR1_L_VAL
+	ldr	r1, =CONFIG_SYS_GAFR1_L_VAL
 	str	r1, [r0]
 
 	ldr	r0, =GAFR1_U
-	ldr	r1, =CFG_GAFR1_U_VAL
+	ldr	r1, =CONFIG_SYS_GAFR1_U_VAL
 	str	r1, [r0]
 
 	ldr	r0, =GAFR2_L
-	ldr	r1, =CFG_GAFR2_L_VAL
+	ldr	r1, =CONFIG_SYS_GAFR2_L_VAL
 	str	r1, [r0]
 
 	ldr	r0, =GAFR2_U
-	ldr	r1, =CFG_GAFR2_U_VAL
+	ldr	r1, =CONFIG_SYS_GAFR2_U_VAL
 	str	r1, [r0]
 
 	ldr	r0, =PSSR			/* enable GPIO pins */
-	ldr	r1, =CFG_PSSR_VAL
+	ldr	r1, =CONFIG_SYS_PSSR_VAL
 	str	r1, [r0]
 
 	/* ---------------------------------------------------------------- */
@@ -147,17 +147,17 @@ mem_init:
 	/* MSC registers: timing, bus width, mem type                       */
 
 	/* MSC0: nCS(0,1)                                                   */
-	ldr	r2, =CFG_MSC0_VAL
+	ldr	r2, =CONFIG_SYS_MSC0_VAL
 	str	r2, [r1, #MSC0_OFFSET]
 	ldr	r2, [r1, #MSC0_OFFSET]		/* read back to ensure      */
 						/* that data latches        */
 	/* MSC1: nCS(2,3)                                                   */
-	ldr	r2, =CFG_MSC1_VAL
+	ldr	r2, =CONFIG_SYS_MSC1_VAL
 	str	r2, [r1, #MSC1_OFFSET]
 	ldr	r2, [r1, #MSC1_OFFSET]
 
 	/* MSC2: nCS(4,5)                                                   */
-	ldr	r2, =CFG_MSC2_VAL
+	ldr	r2, =CONFIG_SYS_MSC2_VAL
 	str	r2, [r1, #MSC2_OFFSET]
 	ldr	r2, [r1, #MSC2_OFFSET]
 
@@ -166,37 +166,37 @@ mem_init:
 	/* ---------------------------------------------------------------- */
 
 	/* MECR: Memory Expansion Card Register                             */
-	ldr	r2, =CFG_MECR_VAL
+	ldr	r2, =CONFIG_SYS_MECR_VAL
 	str	r2, [r1, #MECR_OFFSET]
 	ldr	r2, [r1, #MECR_OFFSET]
 
 	/* MCMEM0: Card Interface slot 0 timing                             */
-	ldr	r2, =CFG_MCMEM0_VAL
+	ldr	r2, =CONFIG_SYS_MCMEM0_VAL
 	str	r2, [r1, #MCMEM0_OFFSET]
 	ldr	r2, [r1, #MCMEM0_OFFSET]
 
 	/* MCMEM1: Card Interface slot 1 timing                             */
-	ldr	r2, =CFG_MCMEM1_VAL
+	ldr	r2, =CONFIG_SYS_MCMEM1_VAL
 	str	r2, [r1, #MCMEM1_OFFSET]
 	ldr	r2, [r1, #MCMEM1_OFFSET]
 
 	/* MCATT0: Card Interface Attribute Space Timing, slot 0            */
-	ldr	r2, =CFG_MCATT0_VAL
+	ldr	r2, =CONFIG_SYS_MCATT0_VAL
 	str	r2, [r1, #MCATT0_OFFSET]
 	ldr	r2, [r1, #MCATT0_OFFSET]
 
 	/* MCATT1: Card Interface Attribute Space Timing, slot 1            */
-	ldr	r2, =CFG_MCATT1_VAL
+	ldr	r2, =CONFIG_SYS_MCATT1_VAL
 	str	r2, [r1, #MCATT1_OFFSET]
 	ldr	r2, [r1, #MCATT1_OFFSET]
 
 	/* MCIO0: Card Interface I/O Space Timing, slot 0                   */
-	ldr	r2, =CFG_MCIO0_VAL
+	ldr	r2, =CONFIG_SYS_MCIO0_VAL
 	str	r2, [r1, #MCIO0_OFFSET]
 	ldr	r2, [r1, #MCIO0_OFFSET]
 
 	/* MCIO1: Card Interface I/O Space Timing, slot 1                   */
-	ldr	r2, =CFG_MCIO1_VAL
+	ldr	r2, =CONFIG_SYS_MCIO1_VAL
 	str	r2, [r1, #MCIO1_OFFSET]
 	ldr	r2, [r1, #MCIO1_OFFSET]
 
@@ -212,7 +212,7 @@ mem_init:
 	/* Before accessing MDREFR we need a valid DRI field, so we set     */
 	/* this to power on defaults + DRI field, set SDRAM clocks free running */
 
-	ldr	r3, =CFG_MDREFR_VAL
+	ldr	r3, =CONFIG_SYS_MDREFR_VAL
 	ldr	r2, =0xFFF
 	and	r3, r3,  r2
 
@@ -243,7 +243,7 @@ mem_init:
 
 	/* set MDREFR according to user define with exception of a few bits */
 
-	ldr     r4, =CFG_MDREFR_VAL
+	ldr     r4, =CONFIG_SYS_MDREFR_VAL
 	ldr	r2, =(MDREFR_K0RUN|MDREFR_K0DB2|MDREFR_K1RUN|MDREFR_K1DB2|\
 					MDREFR_K2RUN |MDREFR_K2DB2)
 	and	r4, r4, r2
@@ -262,7 +262,7 @@ mem_init:
 
 	/* Step 4c: assert MDREFR:E1PIN and E0PIO as desired, set KXFREE  */
 
-	ldr     r4, =CFG_MDREFR_VAL
+	ldr     r4, =CONFIG_SYS_MDREFR_VAL
 	ldr	r2, =(MDREFR_E0PIN|MDREFR_E1PIN|MDREFR_K0FREE| \
 			MDREFR_K1FREE | MDREFR_K2FREE)
 	and	r4, r4, r2
@@ -274,7 +274,7 @@ mem_init:
 	/* Step 4d: write MDCNFG with MDCNFG:DEx deasserted (set to 0), to  */
 	/*          configure but not enable each SDRAM partition pair.     */
 
-	ldr	r4, =CFG_MDCNFG_VAL
+	ldr	r4, =CONFIG_SYS_MDCNFG_VAL
 	bic	r4, r4, #(MDCNFG_DE0|MDCNFG_DE1)
 	bic	r4, r4, #(MDCNFG_DE2|MDCNFG_DE3)
 	str     r4, [r1, #MDCNFG_OFFSET]	/* write back MDCNFG        */
@@ -301,7 +301,7 @@ mem_init:
 	/*          documented in SDRAM data sheets. The address(es) used   */
 	/*          for this purpose must not be cacheable.                 */
 
-	ldr	r3, =CFG_DRAM_BASE
+	ldr	r3, =CONFIG_SYS_DRAM_BASE
 .rept 8
 	str	r2, [r3]
 .endr
@@ -315,7 +315,7 @@ mem_init:
 
 	/* Step 4h: Write MDMRS.                                            */
 
-	ldr     r2, =CFG_MDMRS_VAL
+	ldr     r2, =CONFIG_SYS_MDMRS_VAL
 	str     r2, [r1, #MDMRS_OFFSET]
 
 
diff --git a/board/cerf250/u-boot.lds b/board/cerf250/u-boot.lds
index 14d264a68..7cf9fdf63 100644
--- a/board/cerf250/u-boot.lds
+++ b/board/cerf250/u-boot.lds
@@ -51,6 +51,6 @@ SECTIONS
 
 	. = ALIGN(4);
 	__bss_start = .;
-	.bss (NOLOAD) : { *(.bss) }
+	.bss (NOLOAD) : { *(.bss) . = ALIGN(4); }
 	_end = .;
 }
diff --git a/board/cm4008/flash.c b/board/cm4008/flash.c
index 86c8e2a5f..2e6687246 100644
--- a/board/cm4008/flash.c
+++ b/board/cm4008/flash.c
@@ -31,7 +31,7 @@
 #include <linux/byteorder/swab.h>
 
 
-flash_info_t flash_info[CFG_MAX_FLASH_BANKS];	/* info for FLASH chips */
+flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];	/* info for FLASH chips */
 
 #define mb() __asm__ __volatile__ ("" : : : "memory")
 
@@ -51,7 +51,7 @@ unsigned long flash_init (void)
 	int i;
 	ulong size = 0;
 
-	for (i = 0; i < CFG_MAX_FLASH_BANKS; i++) {
+	for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) {
 		switch (i) {
 		case 0:
 			flash_get_size ((unsigned char *) PHYS_FLASH_1, &flash_info[i]);
@@ -71,8 +71,8 @@ unsigned long flash_init (void)
 	/* Protect monitor and environment sectors
 	 */
 	flash_protect (FLAG_PROTECT_SET,
-		       CFG_FLASH_BASE,
-		       CFG_FLASH_BASE + _bss_start - _armboot_start,
+		       CONFIG_SYS_FLASH_BASE,
+		       CONFIG_SYS_FLASH_BASE + _bss_start - _armboot_start,
 		       &flash_info[0]);
 
 	return size;
@@ -189,10 +189,10 @@ static ulong flash_get_size (unsigned char * addr, flash_info_t * info)
 		break;
 	}
 
-	if (info->sector_count > CFG_MAX_FLASH_SECT) {
+	if (info->sector_count > CONFIG_SYS_MAX_FLASH_SECT) {
 		printf ("** ERROR: sector count %d > max (%d) **\n",
-			info->sector_count, CFG_MAX_FLASH_SECT);
-		info->sector_count = CFG_MAX_FLASH_SECT;
+			info->sector_count, CONFIG_SYS_MAX_FLASH_SECT);
+		info->sector_count = CONFIG_SYS_MAX_FLASH_SECT;
 	}
 
 	addr[0] = 0xFF;	/* restore read mode */
@@ -259,7 +259,7 @@ int flash_erase (flash_info_t * info, int s_first, int s_last)
 
 			while (((status = *addr) & 0x80) != 0x80) {
 				if (get_timer_masked () >
-				    CFG_FLASH_ERASE_TOUT) {
+				    CONFIG_SYS_FLASH_ERASE_TOUT) {
 					printf ("Timeout\n");
 					*addr = 0xB0;	/* suspend erase */
 					*addr = 0xFF;	/* reset to read mode */
@@ -388,7 +388,7 @@ static int write_data (flash_info_t * info, ulong dest, unsigned char data)
 
 	/* wait while polling the status register */
 	while (((status = *addr) & 0x80) != 0x80) {
-		if (get_timer_masked () > CFG_FLASH_WRITE_TOUT) {
+		if (get_timer_masked () > CONFIG_SYS_FLASH_WRITE_TOUT) {
 			*addr = 0xFF;	/* restore read mode */
 			return (1);
 		}
diff --git a/board/cm4008/u-boot.lds b/board/cm4008/u-boot.lds
index 3d38f2340..e1febe19b 100644
--- a/board/cm4008/u-boot.lds
+++ b/board/cm4008/u-boot.lds
@@ -51,6 +51,6 @@ SECTIONS
 
 	. = ALIGN(4);
 	__bss_start = .;
-	.bss (NOLOAD) : { *(.bss) }
+	.bss (NOLOAD) : { *(.bss) . = ALIGN(4); }
 	_end = .;
 }
diff --git a/board/cm41xx/flash.c b/board/cm41xx/flash.c
index 86c8e2a5f..2e6687246 100644
--- a/board/cm41xx/flash.c
+++ b/board/cm41xx/flash.c
@@ -31,7 +31,7 @@
 #include <linux/byteorder/swab.h>
 
 
-flash_info_t flash_info[CFG_MAX_FLASH_BANKS];	/* info for FLASH chips */
+flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];	/* info for FLASH chips */
 
 #define mb() __asm__ __volatile__ ("" : : : "memory")
 
@@ -51,7 +51,7 @@ unsigned long flash_init (void)
 	int i;
 	ulong size = 0;
 
-	for (i = 0; i < CFG_MAX_FLASH_BANKS; i++) {
+	for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) {
 		switch (i) {
 		case 0:
 			flash_get_size ((unsigned char *) PHYS_FLASH_1, &flash_info[i]);
@@ -71,8 +71,8 @@ unsigned long flash_init (void)
 	/* Protect monitor and environment sectors
 	 */
 	flash_protect (FLAG_PROTECT_SET,
-		       CFG_FLASH_BASE,
-		       CFG_FLASH_BASE + _bss_start - _armboot_start,
+		       CONFIG_SYS_FLASH_BASE,
+		       CONFIG_SYS_FLASH_BASE + _bss_start - _armboot_start,
 		       &flash_info[0]);
 
 	return size;
@@ -189,10 +189,10 @@ static ulong flash_get_size (unsigned char * addr, flash_info_t * info)
 		break;
 	}
 
-	if (info->sector_count > CFG_MAX_FLASH_SECT) {
+	if (info->sector_count > CONFIG_SYS_MAX_FLASH_SECT) {
 		printf ("** ERROR: sector count %d > max (%d) **\n",
-			info->sector_count, CFG_MAX_FLASH_SECT);
-		info->sector_count = CFG_MAX_FLASH_SECT;
+			info->sector_count, CONFIG_SYS_MAX_FLASH_SECT);
+		info->sector_count = CONFIG_SYS_MAX_FLASH_SECT;
 	}
 
 	addr[0] = 0xFF;	/* restore read mode */
@@ -259,7 +259,7 @@ int flash_erase (flash_info_t * info, int s_first, int s_last)
 
 			while (((status = *addr) & 0x80) != 0x80) {
 				if (get_timer_masked () >
-				    CFG_FLASH_ERASE_TOUT) {
+				    CONFIG_SYS_FLASH_ERASE_TOUT) {
 					printf ("Timeout\n");
 					*addr = 0xB0;	/* suspend erase */
 					*addr = 0xFF;	/* reset to read mode */
@@ -388,7 +388,7 @@ static int write_data (flash_info_t * info, ulong dest, unsigned char data)
 
 	/* wait while polling the status register */
 	while (((status = *addr) & 0x80) != 0x80) {
-		if (get_timer_masked () > CFG_FLASH_WRITE_TOUT) {
+		if (get_timer_masked () > CONFIG_SYS_FLASH_WRITE_TOUT) {
 			*addr = 0xFF;	/* restore read mode */
 			return (1);
 		}
diff --git a/board/cm41xx/u-boot.lds b/board/cm41xx/u-boot.lds
index 3d38f2340..e1febe19b 100644
--- a/board/cm41xx/u-boot.lds
+++ b/board/cm41xx/u-boot.lds
@@ -51,6 +51,6 @@ SECTIONS
 
 	. = ALIGN(4);
 	__bss_start = .;
-	.bss (NOLOAD) : { *(.bss) }
+	.bss (NOLOAD) : { *(.bss) . = ALIGN(4); }
 	_end = .;
 }
diff --git a/board/cm5200/cm5200.c b/board/cm5200/cm5200.c
index 24e8db0c6..9e2f1a536 100644
--- a/board/cm5200/cm5200.c
+++ b/board/cm5200/cm5200.c
@@ -57,7 +57,7 @@ DECLARE_GLOBAL_DATA_PTR;
 static hw_id_t hw_id;
 
 
-#ifndef CFG_RAMBOOT
+#ifndef CONFIG_SYS_RAMBOOT
 /*
  * Helper function to initialize SDRAM controller.
  */
@@ -87,7 +87,7 @@ static void sdram_start(int hi_addr, mem_conf_t *mem_conf)
 	/* normal operation */
 	*(vu_long *)MPC5XXX_SDRAM_CTRL = mem_conf->control | hi_addr_bit;
 }
-#endif /* CFG_RAMBOOT */
+#endif /* CONFIG_SYS_RAMBOOT */
 
 
 /*
@@ -117,7 +117,7 @@ static mem_conf_t* get_mem_config(int board_type)
 phys_size_t initdram(int board_type)
 {
 	ulong dramsize = 0;
-#ifndef CFG_RAMBOOT
+#ifndef CONFIG_SYS_RAMBOOT
 	ulong test1, test2;
 	mem_conf_t *mem_conf;
 
@@ -131,9 +131,9 @@ phys_size_t initdram(int board_type)
 	*(vu_long *)MPC5XXX_SDRAM_CONFIG2 = mem_conf->config2;
 
 	sdram_start(0, mem_conf);
-	test1 = get_ram_size((long *)CFG_SDRAM_BASE, 0x80000000);
+	test1 = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE, 0x80000000);
 	sdram_start(1, mem_conf);
-	test2 = get_ram_size((long *)CFG_SDRAM_BASE, 0x80000000);
+	test2 = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE, 0x80000000);
 	if (test1 > test2) {
 		sdram_start(0, mem_conf);
 		dramsize = test1;
@@ -150,14 +150,14 @@ phys_size_t initdram(int board_type)
 			__builtin_ffs(dramsize >> 20) - 1;
 	} else
 		*(vu_long *)MPC5XXX_SDRAM_CS0CFG = 0; /* disabled */
-#else /* CFG_RAMBOOT */
+#else /* CONFIG_SYS_RAMBOOT */
 	/* retrieve size of memory connected to SDRAM CS0 */
 	dramsize = *(vu_long *)MPC5XXX_SDRAM_CS0CFG & 0xFF;
 	if (dramsize >= 0x13)
 		dramsize = (1 << (dramsize - 0x13)) << 20;
 	else
 		dramsize = 0;
-#endif /* !CFG_RAMBOOT */
+#endif /* !CONFIG_SYS_RAMBOOT */
 
 	/*
 	 * On MPC5200B we need to set the special configuration delay in the
@@ -178,7 +178,7 @@ static void read_hw_id(hw_id_t hw_id)
 {
 	int i;
 	for (i = 0; i < HW_ID_ELEM_COUNT; ++i)
-		if (i2c_read(CFG_I2C_EEPROM,
+		if (i2c_read(CONFIG_SYS_I2C_EEPROM,
 				hw_id_format[i].offset,
 				2,
 				(uchar *)&hw_id[i][0],
@@ -298,7 +298,7 @@ int checkboard(void)
 	 * also use a little trick to silence I2C-related output.
 	 */
 	gd->flags |= GD_FLG_SILENT;
-	i2c_init (CFG_I2C_SPEED, CFG_I2C_SLAVE);
+	i2c_init (CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
 	gd->flags &= ~GD_FLG_SILENT;
 
 	read_hw_id(hw_id_tmp);
@@ -363,7 +363,7 @@ int misc_init_r(void)
 	char hostname[MODULE_NAME_MAXLEN];
 
 	/* Read ethaddr from EEPROM */
-	if (i2c_read(CFG_I2C_EEPROM, CONFIG_MAC_OFFSET, 2, buf, 6) == 0) {
+	if (i2c_read(CONFIG_SYS_I2C_EEPROM, CONFIG_MAC_OFFSET, 2, buf, 6) == 0) {
 		sprintf(str, "%02X:%02X:%02X:%02X:%02X:%02X",
 			buf[0], buf[1], buf[2], buf[3], buf[4], buf[5]);
 		/* Check if MAC addr is owned by Schindler */
@@ -377,7 +377,7 @@ int misc_init_r(void)
 		}
 	} else {
 		printf(LOG_PREFIX "Warning - Unable to read MAC from I2C"
-			" device at address %02X:%04X\n", CFG_I2C_EEPROM,
+			" device at address %02X:%04X\n", CONFIG_SYS_I2C_EEPROM,
 			CONFIG_MAC_OFFSET);
 	}
 #endif /* defined(CONFIG_HARD_I2C) || defined(CONFIG_SOFT_I2C) */
diff --git a/board/cm5200/cmd_cm5200.c b/board/cm5200/cmd_cm5200.c
index 2201bdd8c..00f0671d7 100644
--- a/board/cm5200/cmd_cm5200.c
+++ b/board/cm5200/cmd_cm5200.c
@@ -39,18 +39,18 @@ int do_i2c(char *argv[])
 	getc();
 
 	temp = 0xf0; /* set io 0-4 as output */
-	i2c_write(CFG_I2C_IO, 3, 1, (uchar *)&temp, 1);
+	i2c_write(CONFIG_SYS_I2C_IO, 3, 1, (uchar *)&temp, 1);
 
 	printf("Press I2C4-7. LED I2C0-3 should have the same state\n\n"
 		"Press any key to stop\n\n");
 
 	while (!tstc()) {
-		i2c_read(CFG_I2C_IO, 0, 1, (uchar *)&temp, 1);
+		i2c_read(CONFIG_SYS_I2C_IO, 0, 1, (uchar *)&temp, 1);
 		temp1 = (temp >> 4) & 0x03;
 		temp1 |= (temp >> 3) & 0x08; /* S302 -> LED303 */
 		temp1 |= (temp >> 5) & 0x04; /* S303 -> LED302 */
 		temp = temp1;
-		i2c_write(CFG_I2C_IO, 1, 1, (uchar *)&temp, 1);
+		i2c_write(CONFIG_SYS_I2C_IO, 1, 1, (uchar *)&temp, 1);
 	}
 	getc();
 
@@ -392,7 +392,7 @@ int do_rs232(char *argv[])
 		error_status = 1;
 		break;
 	}
-	gpio->port_config |= (CFG_GPS_PORT_CONFIG & 0xFF0FF80F);
+	gpio->port_config |= (CONFIG_SYS_GPS_PORT_CONFIG & 0xFF0FF80F);
 
 	return error_status;
 }
diff --git a/board/cm5200/u-boot.lds b/board/cm5200/u-boot.lds
index 87f37de16..7bd6d4da1 100644
--- a/board/cm5200/u-boot.lds
+++ b/board/cm5200/u-boot.lds
@@ -116,6 +116,7 @@ SECTIONS
    *(.dynbss)
    *(.bss)
    *(COMMON)
+   . = ALIGN(4);
   }
   _end = . ;
   PROVIDE (end = .);
diff --git a/board/cmc_pu2/flash.c b/board/cmc_pu2/flash.c
index 9983c7b78..d832e6209 100644
--- a/board/cmc_pu2/flash.c
+++ b/board/cmc_pu2/flash.c
@@ -29,11 +29,11 @@
 
 #include <common.h>
 
-#ifndef	CFG_ENV_ADDR
-#define CFG_ENV_ADDR	(CFG_FLASH_BASE + CFG_ENV_OFFSET)
+#ifndef	CONFIG_ENV_ADDR
+#define CONFIG_ENV_ADDR	(CONFIG_SYS_FLASH_BASE + CONFIG_ENV_OFFSET)
 #endif
 
-flash_info_t	flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
+flash_info_t	flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */
 
 #define FLASH_CYCLE1	0x0555
 #define FLASH_CYCLE2	0x02AA
@@ -54,7 +54,7 @@ static flash_info_t *flash_get_info(ulong base);
 unsigned long flash_init (void)
 {
 	unsigned long size = 0;
-	ulong flashbase = CFG_FLASH_BASE;
+	ulong flashbase = CONFIG_SYS_FLASH_BASE;
 
 	/* Init: no FLASHes known */
 	memset(&flash_info[0], 0, sizeof(flash_info_t));
@@ -63,20 +63,20 @@ unsigned long flash_init (void)
 
 	size = flash_info[0].size;
 
-#if CFG_MONITOR_BASE >= CFG_FLASH_BASE
+#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE
 	/* monitor protection ON by default */
 	flash_protect(FLAG_PROTECT_SET,
-		      CFG_MONITOR_BASE,
-		      CFG_MONITOR_BASE+monitor_flash_len-1,
-		      flash_get_info(CFG_MONITOR_BASE));
+		      CONFIG_SYS_MONITOR_BASE,
+		      CONFIG_SYS_MONITOR_BASE+monitor_flash_len-1,
+		      flash_get_info(CONFIG_SYS_MONITOR_BASE));
 #endif
 
-#ifdef	CFG_ENV_IS_IN_FLASH
+#ifdef	CONFIG_ENV_IS_IN_FLASH
 	/* ENV protection ON by default */
 	flash_protect(FLAG_PROTECT_SET,
-		      CFG_ENV_ADDR,
-		      CFG_ENV_ADDR+CFG_ENV_SIZE-1,
-		      flash_get_info(CFG_ENV_ADDR));
+		      CONFIG_ENV_ADDR,
+		      CONFIG_ENV_ADDR+CONFIG_ENV_SIZE-1,
+		      flash_get_info(CONFIG_ENV_ADDR));
 #endif
 
 	return size ? size : 1;
@@ -104,14 +104,14 @@ static flash_info_t *flash_get_info(ulong base)
 	flash_info_t * info;
 
 	info = NULL;
-	for (i = 0; i < CFG_MAX_FLASH_BANKS; i ++) {
+	for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i ++) {
 		info = & flash_info[i];
 		if (info->size && info->start[0] <= base &&
 		    base <= info->start[0] + info->size - 1)
 			break;
 	}
 
-	return i == CFG_MAX_FLASH_BANKS ? 0 : info;
+	return i == CONFIG_SYS_MAX_FLASH_BANKS ? 0 : info;
 }
 
 /*-----------------------------------------------------------------------
@@ -339,7 +339,7 @@ int	flash_erase (flash_info_t *info, int s_first, int s_last)
 		last  = 0;
 		addr = (vu_short *)(info->start[l_sect]);
 		while ((addr[0] & 0x0080) != 0x0080) {
-			if ((now = get_timer_masked ()) > CFG_FLASH_ERASE_TOUT) {
+			if ((now = get_timer_masked ()) > CONFIG_SYS_FLASH_ERASE_TOUT) {
 				printf ("Timeout\n");
 				return 1;
 			}
@@ -459,7 +459,7 @@ static int write_word_amd (flash_info_t *info, vu_short *dest, ushort data)
 
 	/* data polling for D7 */
 	while ((*dest & 0x0080) != (data & 0x0080)) {
-		if (get_timer_masked () > CFG_FLASH_WRITE_TOUT) {
+		if (get_timer_masked () > CONFIG_SYS_FLASH_WRITE_TOUT) {
 			*dest = 0x00F0;	/* reset bank */
 			return (1);
 		}
diff --git a/board/cmc_pu2/u-boot.lds b/board/cmc_pu2/u-boot.lds
index 14cd22800..987b07d94 100644
--- a/board/cmc_pu2/u-boot.lds
+++ b/board/cmc_pu2/u-boot.lds
@@ -52,6 +52,6 @@ SECTIONS
 
 	. = ALIGN(4);
 	__bss_start = .;
-	.bss (NOLOAD) : { *(.bss) }
+	.bss (NOLOAD) : { *(.bss) . = ALIGN(4); }
 	_end = .;
 }
diff --git a/board/cmi/cmi.c b/board/cmi/cmi.c
index 8501cae21..b78183e13 100644
--- a/board/cmi/cmi.c
+++ b/board/cmi/cmi.c
@@ -70,4 +70,4 @@ phys_size_t initdram(int board_type)
 /*
  * Absolute environment address for linker file.
  */
-GEN_ABS(env_start, CFG_ENV_OFFSET + CFG_FLASH_BASE);
+GEN_ABS(env_start, CONFIG_ENV_OFFSET + CONFIG_SYS_FLASH_BASE);
diff --git a/board/cmi/flash.c b/board/cmi/flash.c
index f57d8ecfe..630c3305e 100644
--- a/board/cmi/flash.c
+++ b/board/cmi/flash.c
@@ -36,15 +36,15 @@
 #include <common.h>
 #include <mpc5xx.h>
 
-#if defined(CFG_ENV_IS_IN_FLASH)
-# ifndef  CFG_ENV_ADDR
-#  define CFG_ENV_ADDR	(CFG_FLASH_BASE + CFG_ENV_OFFSET)
+#if defined(CONFIG_ENV_IS_IN_FLASH)
+# ifndef  CONFIG_ENV_ADDR
+#  define CONFIG_ENV_ADDR	(CONFIG_SYS_FLASH_BASE + CONFIG_ENV_OFFSET)
 # endif
-# ifndef  CFG_ENV_SIZE
-#  define CFG_ENV_SIZE	CFG_ENV_SECT_SIZE
+# ifndef  CONFIG_ENV_SIZE
+#  define CONFIG_ENV_SIZE	CONFIG_ENV_SECT_SIZE
 # endif
-# ifndef  CFG_ENV_SECT_SIZE
-#  define CFG_ENV_SECT_SIZE  CFG_ENV_SIZE
+# ifndef  CONFIG_ENV_SECT_SIZE
+#  define CONFIG_ENV_SECT_SIZE  CONFIG_ENV_SIZE
 # endif
 #endif
 
@@ -62,7 +62,7 @@
 #define FLASH_CMD_PROTECT_CLEAR		0x00D0
 #define FLASH_STATUS_DONE		0x0080
 
-flash_info_t	flash_info[CFG_MAX_FLASH_BANKS];
+flash_info_t	flash_info[CONFIG_SYS_MAX_FLASH_BANKS];
 
 /*
  * Local function prototypes
@@ -81,7 +81,7 @@ unsigned long flash_init (void)
 	int i;
 
 	/* Init: no FLASHes known */
-	for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) {
+	for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
 		flash_info[i].flash_id = FLASH_UNKNOWN;
 	}
 
@@ -102,19 +102,19 @@ unsigned long flash_init (void)
 
 	flash_info[0].size = size_b0;
 
-#if CFG_MONITOR_BASE >= CFG_FLASH_BASE
+#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE
 	/* monitor protection ON by default */
 	flash_protect(FLAG_PROTECT_SET,
-		      CFG_MONITOR_BASE,
-		      CFG_MONITOR_BASE+monitor_flash_len-1,
+		      CONFIG_SYS_MONITOR_BASE,
+		      CONFIG_SYS_MONITOR_BASE+monitor_flash_len-1,
 		      &flash_info[0]);
 #endif
 
-#ifdef	CFG_ENV_IS_IN_FLASH
+#ifdef	CONFIG_ENV_IS_IN_FLASH
 	/* ENV protection ON by default */
 	flash_protect(FLAG_PROTECT_SET,
-		      CFG_ENV_ADDR,
-		      CFG_ENV_ADDR+CFG_ENV_SECT_SIZE-1,
+		      CONFIG_ENV_ADDR,
+		      CONFIG_ENV_ADDR+CONFIG_ENV_SECT_SIZE-1,
 		      &flash_info[0]);
 #endif
 
@@ -268,10 +268,10 @@ static ulong flash_get_size (vu_short *addr, flash_info_t *info)
 
 	}
 
-	if (info->sector_count > CFG_MAX_FLASH_SECT) {
+	if (info->sector_count > CONFIG_SYS_MAX_FLASH_SECT) {
 		printf ("** ERROR: sector count %d > max (%d) **\n",
-			info->sector_count, CFG_MAX_FLASH_SECT);
-		info->sector_count = CFG_MAX_FLASH_SECT;
+			info->sector_count, CONFIG_SYS_MAX_FLASH_SECT);
+		info->sector_count = CONFIG_SYS_MAX_FLASH_SECT;
 	}
 
 	addr[0] = FLASH_CMD_RESET;		/* restore read mode */
@@ -345,7 +345,7 @@ int flash_erase (flash_info_t *info, int s_first, int s_last)
 			udelay (1000);
 
 			while (((status = *addr) & FLASH_STATUS_DONE) != FLASH_STATUS_DONE) {
-				if ((now=get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+				if ((now=get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
 					printf("Flash erase timeout at address %lx\n", info->start[sect]);
 					*addr = FLASH_CMD_SUSPEND_ERASE;
 					*addr = FLASH_CMD_RESET;
@@ -473,7 +473,7 @@ static int write_short (flash_info_t *info, ulong dest, ushort data)
 
 	/* wait for error or finish */
 	while(!(addr[0] & FLASH_STATUS_DONE)){
-		if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+		if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
 			addr[0] = FLASH_CMD_RESET;
 			return (1);
 		}
@@ -504,7 +504,7 @@ int flash_real_protect(flash_info_t *info, long sector, int prot)
 	/* wait for error or finish */
 	start = get_timer (0);
 	while(!(addr[0] & FLASH_STATUS_DONE)){
-		if (get_timer(start) > CFG_FLASH_ERASE_TOUT) {
+		if (get_timer(start) > CONFIG_SYS_FLASH_ERASE_TOUT) {
 			printf("Flash protect timeout at address %lx\n",  info->start[sector]);
 			addr[0] = FLASH_CMD_RESET;
 			return (1);
diff --git a/board/cobra5272/Makefile b/board/cobra5272/Makefile
index be704b76f..cf07cf40f 100644
--- a/board/cobra5272/Makefile
+++ b/board/cobra5272/Makefile
@@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk
 
 LIB	= $(obj)lib$(BOARD).a
 
-COBJS	= $(BOARD).o flash.o mii.o
+COBJS	= $(BOARD).o flash.o
 
 SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
 OBJS	:= $(addprefix $(obj),$(COBJS))
diff --git a/board/cobra5272/cobra5272.c b/board/cobra5272/cobra5272.c
index b92855050..a62214cf5 100644
--- a/board/cobra5272/cobra5272.c
+++ b/board/cobra5272/cobra5272.c
@@ -42,7 +42,7 @@ phys_size_t initdram (int board_type)
 	/* Dummy write to start SDRAM */
 	*((volatile unsigned long *) 0) = 0;
 
-	return CFG_SDRAM_SIZE * 1024 * 1024;
+	return CONFIG_SYS_SDRAM_SIZE * 1024 * 1024;
 };
 
 int testdram (void)
diff --git a/board/cobra5272/flash.c b/board/cobra5272/flash.c
index 82452e2c4..33c936120 100644
--- a/board/cobra5272/flash.c
+++ b/board/cobra5272/flash.c
@@ -23,10 +23,10 @@
 
 #include <common.h>
 
-#define PHYS_FLASH_1 CFG_FLASH_BASE
+#define PHYS_FLASH_1 CONFIG_SYS_FLASH_BASE
 #define FLASH_BANK_SIZE 0x200000
 
-flash_info_t flash_info[CFG_MAX_FLASH_BANKS];
+flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];
 
 void flash_print_info (flash_info_t * info)
 {
@@ -74,15 +74,15 @@ unsigned long flash_init (void)
 	int i, j;
 	ulong size = 0;
 
-	for (i = 0; i < CFG_MAX_FLASH_BANKS; i++) {
+	for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) {
 		ulong flashbase = 0;
 
 		flash_info[i].flash_id =
 			(AMD_MANUFACT & FLASH_VENDMASK) |
 			(AMD_ID_PL160CB & FLASH_TYPEMASK);
 		flash_info[i].size = FLASH_BANK_SIZE;
-		flash_info[i].sector_count = CFG_MAX_FLASH_SECT;
-		memset (flash_info[i].protect, 0, CFG_MAX_FLASH_SECT);
+		flash_info[i].sector_count = CONFIG_SYS_MAX_FLASH_SECT;
+		memset (flash_info[i].protect, 0, CONFIG_SYS_MAX_FLASH_SECT);
 		if (i == 0)
 			flashbase = PHYS_FLASH_1;
 		else
@@ -113,8 +113,8 @@ unsigned long flash_init (void)
 	}
 
 	flash_protect (FLAG_PROTECT_SET,
-		       CFG_FLASH_BASE,
-		       CFG_FLASH_BASE + 0x3ffff, &flash_info[0]);
+		       CONFIG_SYS_FLASH_BASE,
+		       CONFIG_SYS_FLASH_BASE + 0x3ffff, &flash_info[0]);
 
 	return size;
 }
@@ -128,8 +128,8 @@ unsigned long flash_init (void)
 #define CMD_PROGRAM		0x00A0
 #define CMD_UNLOCK_BYPASS	0x0020
 
-#define MEM_FLASH_ADDR1		(*(volatile u16 *)(CFG_FLASH_BASE + (0x00000555<<1)))
-#define MEM_FLASH_ADDR2		(*(volatile u16 *)(CFG_FLASH_BASE + (0x000002AA<<1)))
+#define MEM_FLASH_ADDR1		(*(volatile u16 *)(CONFIG_SYS_FLASH_BASE + (0x00000555<<1)))
+#define MEM_FLASH_ADDR2		(*(volatile u16 *)(CONFIG_SYS_FLASH_BASE + (0x000002AA<<1)))
 
 #define BIT_ERASE_DONE		0x0080
 #define BIT_RDY_MASK		0x0080
@@ -211,7 +211,7 @@ int flash_erase (flash_info_t * info, int s_first, int s_last)
 				result = *addr;
 
 				/* check timeout */
-				if (get_timer (0) > CFG_FLASH_ERASE_TOUT) {
+				if (get_timer (0) > CONFIG_SYS_FLASH_ERASE_TOUT) {
 					MEM_FLASH_ADDR1 = CMD_READ_ARRAY;
 					chip1 = TMO;
 					break;
@@ -299,7 +299,7 @@ static int write_word (flash_info_t * info, ulong dest, ulong data)
 		result = *addr;
 
 		/* check timeout */
-		if (get_timer (0) > CFG_FLASH_ERASE_TOUT) {
+		if (get_timer (0) > CONFIG_SYS_FLASH_ERASE_TOUT) {
 			chip1 = ERR | TMO;
 			break;
 		}
diff --git a/board/cobra5272/mii.c b/board/cobra5272/mii.c
deleted file mode 100644
index b30ba803f..000000000
--- a/board/cobra5272/mii.c
+++ /dev/null
@@ -1,303 +0,0 @@
-/*
- * Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
- * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/fec.h>
-#include <asm/immap.h>
-
-#include <config.h>
-#include <net.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#if defined(CONFIG_CMD_NET) && defined(CONFIG_NET_MULTI)
-#undef MII_DEBUG
-#undef ET_DEBUG
-
-int fecpin_setclear(struct eth_device *dev, int setclear)
-{
-	volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO;
-
-	if (setclear) {
-		gpio->gpio_pbcnt |= GPIO_PBCNT_E_MDC | GPIO_PBCNT_E_RXER | GPIO_PBCNT_E_RXD1 | GPIO_PBCNT_E_RXD2 | GPIO_PBCNT_E_RXD3 | GPIO_PBCNT_E_TXD1 | GPIO_PBCNT_E_TXD2 | GPIO_PBCNT_E_TXD3;
-	} else {
-	}
-	return 0;
-}
-
-#if defined(CFG_DISCOVER_PHY) || defined(CONFIG_CMD_MII)
-#include <miiphy.h>
-
-/* Make MII read/write commands for the FEC. */
-#define mk_mii_read(ADDR, REG)	(0x60020000 | ((ADDR << 23) | (REG & 0x1f) << 18))
-
-#define mk_mii_write(ADDR, REG, VAL)	(0x50020000 | ((ADDR << 23) | (REG & 0x1f) << 18) | (VAL & 0xffff))
-
-/* PHY identification */
-#define PHY_ID_LXT970		0x78100000	/* LXT970 */
-#define PHY_ID_LXT971		0x001378e0	/* LXT971 and 972 */
-#define PHY_ID_82555		0x02a80150	/* Intel 82555 */
-#define PHY_ID_QS6612		0x01814400	/* QS6612 */
-#define PHY_ID_AMD79C784	0x00225610	/* AMD 79C784 */
-#define PHY_ID_AMD79C874VC	0x0022561B	/* AMD 79C874 */
-#define PHY_ID_LSI80225		0x0016f870	/* LSI 80225 */
-#define PHY_ID_LSI80225B	0x0016f880	/* LSI 80225/B */
-#define PHY_ID_DP83848VV	0x20005C90	/* National 83848 */
-#define PHY_ID_DP83849		0x20005CA2	/* National 82849 */
-
-#define STR_ID_LXT970		"LXT970"
-#define STR_ID_LXT971		"LXT971"
-#define STR_ID_82555		"Intel82555"
-#define STR_ID_QS6612		"QS6612"
-#define STR_ID_AMD79C784	"AMD79C784"
-#define STR_ID_AMD79C874VC	"AMD79C874VC"
-#define STR_ID_LSI80225		"LSI80225"
-#define STR_ID_LSI80225B	"LSI80225/B"
-#define STR_ID_DP83848VV	"N83848"
-#define STR_ID_DP83849		"N83849"
-
-/****************************************************************************
- * mii_init -- Initialize the MII for MII command without ethernet
- * This function is a subset of eth_init
- ****************************************************************************
- */
-void mii_reset(struct fec_info_s *info)
-{
-	volatile fec_t *fecp = (fec_t *) (info->miibase);
-	int i;
-
-	fecp->ecr = FEC_ECR_RESET;
-	for (i = 0; (fecp->ecr & FEC_ECR_RESET) && (i < FEC_RESET_DELAY); ++i) {
-		udelay(1);
-	}
-	if (i == FEC_RESET_DELAY) {
-		printf("FEC_RESET_DELAY timeout\n");
-	}
-}
-
-/* send command to phy using mii, wait for result */
-uint mii_send(uint mii_cmd)
-{
-	struct fec_info_s *info;
-	struct eth_device *dev;
-	volatile fec_t *ep;
-	uint mii_reply;
-	int j = 0;
-
-	/* retrieve from register structure */
-	dev = eth_get_dev();
-	info = dev->priv;
-
-	ep = (fec_t *) info->miibase;
-
-	ep->mmfr = mii_cmd;	/* command to phy */
-
-	/* wait for mii complete */
-	while (!(ep->eir & FEC_EIR_MII) && (j < MCFFEC_TOUT_LOOP)) {
-		udelay(1);
-		j++;
-	}
-	if (j >= MCFFEC_TOUT_LOOP) {
-		printf("MII not complete\n");
-		return -1;
-	}
-
-	mii_reply = ep->mmfr;	/* result from phy */
-	ep->eir = FEC_EIR_MII;	/* clear MII complete */
-#ifdef ET_DEBUG
-	printf("%s[%d] %s: sent=0x%8.8x, reply=0x%8.8x\n",
-	       __FILE__, __LINE__, __FUNCTION__, mii_cmd, mii_reply);
-#endif
-
-	return (mii_reply & 0xffff);	/* data read from phy */
-}
-#endif				/* CFG_DISCOVER_PHY || CONFIG_CMD_MII */
-
-#if defined(CFG_DISCOVER_PHY)
-int mii_discover_phy(struct eth_device *dev)
-{
-#define MAX_PHY_PASSES 11
-	struct fec_info_s *info = dev->priv;
-	int phyaddr, pass;
-	uint phyno, phytype;
-
-	if (info->phyname_init)
-		return info->phy_addr;
-
-	phyaddr = -1;		/* didn't find a PHY yet */
-	for (pass = 1; pass <= MAX_PHY_PASSES && phyaddr < 0; ++pass) {
-		if (pass > 1) {
-			/* PHY may need more time to recover from reset.
-			 * The LXT970 needs 50ms typical, no maximum is
-			 * specified, so wait 10ms before try again.
-			 * With 11 passes this gives it 100ms to wake up.
-			 */
-			udelay(10000);	/* wait 10ms */
-		}
-
-		for (phyno = 0; phyno < 32 && phyaddr < 0; ++phyno) {
-
-			phytype = mii_send(mk_mii_read(phyno, PHY_PHYIDR1));
-#ifdef ET_DEBUG
-			printf("PHY type 0x%x pass %d type\n", phytype, pass);
-#endif
-			if (phytype != 0xffff) {
-				phyaddr = phyno;
-				phytype <<= 16;
-				phytype |=
-				    mii_send(mk_mii_read(phyno, PHY_PHYIDR2));
-
-				switch (phytype & 0xffffffff) {
-				case PHY_ID_AMD79C874VC:
-					strcpy(info->phy_name,
-					       STR_ID_AMD79C874VC);
-					info->phyname_init = 1;
-					break;
-				default:
-					strcpy(info->phy_name, "unknown");
-					info->phyname_init = 1;
-					break;
-				}
-
-#ifdef ET_DEBUG
-				printf("PHY @ 0x%x pass %d type ", phyno, pass);
-				switch (phytype & 0xffffffff) {
-				case PHY_ID_AMD79C874VC:
-					printf(STR_ID_AMD79C874VC);
-					break;
-				default:
-					printf("0x%08x\n", phytype);
-					break;
-				}
-#endif
-			}
-		}
-	}
-	if (phyaddr < 0)
-		printf("No PHY device found.\n");
-
-	return phyaddr;
-}
-#endif				/* CFG_DISCOVER_PHY */
-
-void mii_init(void) __attribute__((weak,alias("__mii_init")));
-
-void __mii_init(void)
-{
-	volatile fec_t *fecp;
-	struct fec_info_s *info;
-	struct eth_device *dev;
-	int miispd = 0, i = 0;
-	u16 autoneg = 0;
-
-	/* retrieve from register structure */
-	dev = eth_get_dev();
-	info = dev->priv;
-
-	fecp = (fec_t *) info->miibase;
-
-	fecpin_setclear(dev, 1);
-
-	mii_reset(info);
-
-	/* We use strictly polling mode only */
-	fecp->eimr = 0;
-
-	/* Clear any pending interrupt */
-	fecp->eir = 0xffffffff;
-
-	/* Set MII speed */
-	miispd = (gd->bus_clk / 1000000) / 5;
-	fecp->mscr = miispd << 1;
-
-	info->phy_addr = mii_discover_phy(dev);
-
-#define AUTONEGLINK		(PHY_BMSR_AUTN_COMP | PHY_BMSR_LS)
-	while (i < MCFFEC_TOUT_LOOP) {
-		autoneg = 0;
-		miiphy_read(dev->name, info->phy_addr, PHY_BMSR, &autoneg);
-		i++;
-
-		if ((autoneg & AUTONEGLINK) == AUTONEGLINK)
-			break;
-
-		udelay(500);
-	}
-	if (i >= MCFFEC_TOUT_LOOP) {
-		printf("Auto Negotiation not complete\n");
-	}
-
-	/* adapt to the half/full speed settings */
-	info->dup_spd = miiphy_duplex(dev->name, info->phy_addr) << 16;
-	info->dup_spd |= miiphy_speed(dev->name, info->phy_addr);
-}
-
-/*****************************************************************************
- * Read and write a MII PHY register, routines used by MII Utilities
- *
- * FIXME: These routines are expected to return 0 on success, but mii_send
- *	  does _not_ return an error code. Maybe 0xFFFF means error, i.e.
- *	  no PHY connected...
- *	  For now always return 0.
- * FIXME: These routines only work after calling eth_init() at least once!
- *	  Otherwise they hang in mii_send() !!! Sorry!
- *****************************************************************************/
-
-int mcffec_miiphy_read(char *devname, unsigned char addr, unsigned char reg,
-		       unsigned short *value)
-{
-	short rdreg;		/* register working value */
-
-#ifdef MII_DEBUG
-	printf("miiphy_read(0x%x) @ 0x%x = ", reg, addr);
-#endif
-	rdreg = mii_send(mk_mii_read(addr, reg));
-
-	*value = rdreg;
-
-#ifdef MII_DEBUG
-	printf("0x%04x\n", *value);
-#endif
-
-	return 0;
-}
-
-int mcffec_miiphy_write(char *devname, unsigned char addr, unsigned char reg,
-			unsigned short value)
-{
-	short rdreg;		/* register working value */
-
-#ifdef MII_DEBUG
-	printf("miiphy_write(0x%x) @ 0x%x = ", reg, addr);
-#endif
-
-	rdreg = mii_send(mk_mii_write(addr, reg, value));
-
-#ifdef MII_DEBUG
-	printf("0x%04x\n", value);
-#endif
-
-	return 0;
-}
-
-#endif				/* CONFIG_CMD_NET, FEC_ENET & NET_MULTI */
diff --git a/board/cobra5272/u-boot.lds b/board/cobra5272/u-boot.lds
index f99a236a3..bed11777e 100644
--- a/board/cobra5272/u-boot.lds
+++ b/board/cobra5272/u-boot.lds
@@ -62,7 +62,7 @@ SECTIONS
     lib_generic/zlib.o		(.text)
 
     . = DEFINED(env_offset) ? env_offset : .;
-    common/environment.o	(.text)
+    common/env_embedded.o	(.text)
 
     *(.text)
     *(.fixup)
diff --git a/board/cogent/README b/board/cogent/README
index e6eef662c..31ca187b5 100644
--- a/board/cogent/README
+++ b/board/cogent/README
@@ -80,16 +80,16 @@ To configure, perform the usual U-Boot configuration task of editing
 "include/config_cogent_mpc8xx.h" and reviewing all the options and
 settings in there. In particular, check the chip select values
 installed into the memory controller's various option and base
-registers - these are set by the defines CFG_CMA_CSn_{BASE,SIZE} and
-CFG_{B,O}Rn_PRELIM. Also be careful of the clock settings installed
-into the SCCR - via the define CFG_SCCR. Finally, decide whether you
+registers - these are set by the defines CONFIG_SYS_CMA_CSn_{BASE,SIZE} and
+CONFIG_SYS_{B,O}Rn_PRELIM. Also be careful of the clock settings installed
+into the SCCR - via the define CONFIG_SYS_SCCR. Finally, decide whether you
 want the serial console on motherboard serial port A or on one of the
 8xx SMC ports, and set CONFIG_8xx_CONS_{SMC1,SMC2,NONE} accordingly
 (NONE means use Cogent motherboard serial port A).
 
 Then edit the file "cogent/config.mk". Firstly, set TEXT_BASE to be
 the base address of the EPROM for the CPU module. This should be the
-same as the value selected for CFG_MONITOR_BASE in
+same as the value selected for CONFIG_SYS_MONITOR_BASE in
 "include/config_cogent_*.h" (in fact, I have made this automatic via
 the -DTEXT_BASE=... option in CPPFLAGS).
 
diff --git a/board/cogent/flash.c b/board/cogent/flash.c
index 969520d27..e6c85b6d9 100644
--- a/board/cogent/flash.c
+++ b/board/cogent/flash.c
@@ -24,17 +24,17 @@
 #include <common.h>
 #include <board/cogent/flash.h>
 
-flash_info_t	flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips	*/
+flash_info_t	flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips	*/
 
-#if defined(CFG_ENV_IS_IN_FLASH)
-# ifndef  CFG_ENV_ADDR
-#  define CFG_ENV_ADDR	(CFG_FLASH_BASE + CFG_ENV_OFFSET)
+#if defined(CONFIG_ENV_IS_IN_FLASH)
+# ifndef  CONFIG_ENV_ADDR
+#  define CONFIG_ENV_ADDR	(CONFIG_SYS_FLASH_BASE + CONFIG_ENV_OFFSET)
 # endif
-# ifndef  CFG_ENV_SIZE
-#  define CFG_ENV_SIZE	CFG_ENV_SECT_SIZE
+# ifndef  CONFIG_ENV_SIZE
+#  define CONFIG_ENV_SIZE	CONFIG_ENV_SECT_SIZE
 # endif
-# ifndef  CFG_ENV_SECT_SIZE
-#  define CFG_ENV_SECT_SIZE  CFG_ENV_SIZE
+# ifndef  CONFIG_ENV_SECT_SIZE
+#  define CONFIG_ENV_SECT_SIZE  CONFIG_ENV_SIZE
 # endif
 #endif
 
@@ -121,7 +121,7 @@ c302f_probe(flash_info_t *fip, c302f_addr_t base)
 		fip->size += C302F_BNK_SIZE;
 		osc = fip->sector_count;
 		fip->sector_count += C302F_BNK_NBLOCKS;
-		if ((nsc = fip->sector_count) >= CFG_MAX_FLASH_SECT)
+		if ((nsc = fip->sector_count) >= CONFIG_SYS_MAX_FLASH_SECT)
 			panic("Too many sectors in flash at address 0x%08lx\n",
 				(unsigned long)base);
 
@@ -264,7 +264,7 @@ c302f_write_word(c302f_addr_t addr, c302f_word_t value)
 	/* data polling for D7 */
 	start = get_timer (0);
 	do {
-		if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+		if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
 			retval = 1;
 			goto done;
 		}
@@ -295,7 +295,7 @@ flash_init(void)
 	flash_info_t *fip;
 
 	/* Init: no FLASHes known */
-	for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) {
+	for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
 		flash_info[i].flash_id = FLASH_UNKNOWN;
 	}
 
@@ -303,7 +303,7 @@ flash_init(void)
 	total = 0L;
 
 #if defined(CONFIG_CMA302)
-	c302f_probe(fip, (c302f_addr_t)CFG_FLASH_BASE);
+	c302f_probe(fip, (c302f_addr_t)CONFIG_SYS_FLASH_BASE);
 	total += fip->size;
 	fip++;
 #endif
@@ -320,18 +320,18 @@ flash_init(void)
 	 * protect monitor and environment sectors
 	 */
 
-#if CFG_MONITOR_BASE == CFG_FLASH_BASE
+#if CONFIG_SYS_MONITOR_BASE == CONFIG_SYS_FLASH_BASE
 	flash_protect(FLAG_PROTECT_SET,
-		      CFG_MONITOR_BASE,
-		      CFG_MONITOR_BASE+monitor_flash_len-1,
+		      CONFIG_SYS_MONITOR_BASE,
+		      CONFIG_SYS_MONITOR_BASE+monitor_flash_len-1,
 		      &flash_info[0]);
 #endif
 
-#ifdef	CFG_ENV_IS_IN_FLASH
+#ifdef	CONFIG_ENV_IS_IN_FLASH
 	/* ENV protection ON by default */
 	flash_protect(FLAG_PROTECT_SET,
-		      CFG_ENV_ADDR,
-		      CFG_ENV_ADDR+CFG_ENV_SECT_SIZE-1,
+		      CONFIG_ENV_ADDR,
+		      CONFIG_ENV_ADDR+CONFIG_ENV_SECT_SIZE-1,
 		      &flash_info[0]);
 #endif
 	return total;
@@ -472,7 +472,7 @@ flash_erase(flash_info_t *info, int s_first, int s_last)
 			do {
 				now = get_timer(start);
 
-				if (now - estart > CFG_FLASH_ERASE_TOUT) {
+				if (now - estart > CONFIG_SYS_FLASH_ERASE_TOUT) {
 					printf ("Timeout (sect %d)\n", sect);
 					haderr = 1;
 					break;
diff --git a/board/cogent/lcd.c b/board/cogent/lcd.c
index 814b4c80a..76f5ad103 100644
--- a/board/cogent/lcd.c
+++ b/board/cogent/lcd.c
@@ -197,7 +197,7 @@ void
 lcd_printf(const char *fmt, ...)
 {
     va_list args;
-    char buf[CFG_PBSIZE];
+    char buf[CONFIG_SYS_PBSIZE];
 
     va_start(args, fmt);
     (void)vsprintf(buf, fmt, args);
@@ -234,7 +234,7 @@ lcd_heartbeat(void)
 void board_show_activity (ulong timestamp)
 {
 #ifdef CONFIG_STATUS_LED
-	if ((timestamp % (CFG_HZ / 2) == 0)
+	if ((timestamp % (CONFIG_SYS_HZ / 2) == 0)
 		lcd_heartbeat ();
 #endif
 }
diff --git a/board/cogent/mb.h b/board/cogent/mb.h
index f6eaf0ac5..b3aba48f7 100644
--- a/board/cogent/mb.h
+++ b/board/cogent/mb.h
@@ -69,51 +69,51 @@
  * 0xA000000-0xDFFFFFF.
  */
 
-#define CMA_MB_RAM_BASE		(CFG_CMA_MB_BASE+0x0000000)
+#define CMA_MB_RAM_BASE		(CONFIG_SYS_CMA_MB_BASE+0x0000000)
 #define CMA_MB_RAM_SIZE		0x2000000	/* dip sws set actual size */
 
 #if (CMA_MB_CAPS & CMA_MB_CAP_SLOT1)
-#define CMA_MB_SLOT1_BASE	(CFG_CMA_MB_BASE+0x2000000)
+#define CMA_MB_SLOT1_BASE	(CONFIG_SYS_CMA_MB_BASE+0x2000000)
 #define CMA_MB_SLOT1_SIZE	0x2000000
 #endif
 
 #if (CMA_MB_CAPS & CMA_MB_CAP_SLOT2)
-#define CMA_MB_SLOT2_BASE	(CFG_CMA_MB_BASE+0x4000000)
+#define CMA_MB_SLOT2_BASE	(CONFIG_SYS_CMA_MB_BASE+0x4000000)
 #define CMA_MB_SLOT2_SIZE	0x2000000
 #endif
 #if (CMA_MB_CAPS & CMA_MB_CAP_PCI)
-#define CMA_MB_STDPCI_BASE	(CFG_CMA_MB_BASE+0x4000000)
+#define CMA_MB_STDPCI_BASE	(CONFIG_SYS_CMA_MB_BASE+0x4000000)
 #define CMA_MB_STDPCI_SIZE	0x1ff0000
-#define CMA_MB_V360EPC_BASE	(CFG_CMA_MB_BASE+0x5ff0000)
+#define CMA_MB_V360EPC_BASE	(CONFIG_SYS_CMA_MB_BASE+0x5ff0000)
 #define CMA_MB_V360EPC_SIZE	0x10000
 #endif
 
 #if (CMA_MB_CAPS & CMA_MB_CAP_SLOT3)
-#define CMA_MB_SLOT3_BASE	(CFG_CMA_MB_BASE+0x6000000)
+#define CMA_MB_SLOT3_BASE	(CONFIG_SYS_CMA_MB_BASE+0x6000000)
 #define CMA_MB_SLOT3_SIZE	0x2000000
 #endif
 
 #if (CMA_MB_CAPS & CMA_MB_CAP_PCI_EXT)
-#define CMA_MB_EXTPCI_BASE	(CFG_CMA_MB_BASE+0xa000000)
+#define CMA_MB_EXTPCI_BASE	(CONFIG_SYS_CMA_MB_BASE+0xa000000)
 #define CMA_MB_EXTPCI_SIZE	0x4000000
 #endif
 
-#define CMA_MB_ROMLOW_BASE	(CFG_CMA_MB_BASE+0xe000000)
+#define CMA_MB_ROMLOW_BASE	(CONFIG_SYS_CMA_MB_BASE+0xe000000)
 #define CMA_MB_ROMLOW_SIZE	0x800000
 #if (CMA_MB_CAPS & CMA_MB_CAP_FLASH)
-#define CMA_MB_FLLOW_EXEC_BASE	(CFG_CMA_MB_BASE+0xe000000)
+#define CMA_MB_FLLOW_EXEC_BASE	(CONFIG_SYS_CMA_MB_BASE+0xe000000)
 #define CMA_MB_FLLOW_EXEC_SIZE	0x100000
-#define CMA_MB_FLLOW_RDWR_BASE	(CFG_CMA_MB_BASE+0xe400000)
+#define CMA_MB_FLLOW_RDWR_BASE	(CONFIG_SYS_CMA_MB_BASE+0xe400000)
 #define CMA_MB_FLLOW_RDWR_SIZE	0x400000
 #endif
 
 #if (CMA_MB_CAPS & CMA_MB_CAP_RTC)
-#define CMA_MB_RTC_BASE		(CFG_CMA_MB_BASE+0xe800000)
+#define CMA_MB_RTC_BASE		(CONFIG_SYS_CMA_MB_BASE+0xe800000)
 #define CMA_MB_RTC_SIZE		0x4000
 #endif
 
 #if (CMA_MB_CAPS & CMA_MB_CAP_SERPAR)
-#define CMA_MB_SERPAR_BASE	(CFG_CMA_MB_BASE+0xe900000)
+#define CMA_MB_SERPAR_BASE	(CONFIG_SYS_CMA_MB_BASE+0xe900000)
 #define   CMA_MB_SERIALB_BASE	  (CMA_MB_SERPAR_BASE+0x00)
 #define   CMA_MB_SERIALA_BASE	  (CMA_MB_SERPAR_BASE+0x40)
 #define   CMA_MB_PARALLEL_BASE	  (CMA_MB_SERPAR_BASE+0x80)
@@ -121,20 +121,20 @@
 #endif
 
 #if (CMA_MB_CAPS & CMA_MB_CAP_KBM)
-#define CMA_MB_PKBM_BASE	(CFG_CMA_MB_BASE+0xe900100)
+#define CMA_MB_PKBM_BASE	(CONFIG_SYS_CMA_MB_BASE+0xe900100)
 #define CMA_MB_PKBM_SIZE	0x10
 #endif
 
 #if (CMA_MB_CAPS & CMA_MB_CAP_LCD)
-#define CMA_MB_LCD_BASE		(CFG_CMA_MB_BASE+0xeb00000)
+#define CMA_MB_LCD_BASE		(CONFIG_SYS_CMA_MB_BASE+0xeb00000)
 #define CMA_MB_LCD_SIZE		0x10
 #endif
 
-#define CMA_MB_DIPSW_BASE	(CFG_CMA_MB_BASE+0xec00000)
+#define CMA_MB_DIPSW_BASE	(CONFIG_SYS_CMA_MB_BASE+0xec00000)
 #define CMA_MB_DIPSW_SIZE	0x10
 
 #if (CMA_MB_CAPS & (CMA_MB_CAP_SLOT1|CMA_MB_CAP_SER2|CMA_MB_CAP_KBM))
-#define CMA_MB_SLOT1CFG_BASE	(CFG_CMA_MB_BASE+0xf100000)
+#define CMA_MB_SLOT1CFG_BASE	(CONFIG_SYS_CMA_MB_BASE+0xf100000)
 #if (CMA_MB_CAPS & CMA_MB_CAP_SER2)
 #define   CMA_MB_SER2_BASE	  (CMA_MB_SLOT1CFG_BASE+0x80)
 #define     CMA_MB_SER2B_BASE	    (CMA_MB_SER2_BASE+0x00)
@@ -152,7 +152,7 @@
 #endif
 
 #if (CMA_MB_CAPS & CMA_MB_CAP_SLOT2)
-#define CMA_MB_SLOT2CFG_BASE	(CFG_CMA_MB_BASE+0xf200000)
+#define CMA_MB_SLOT2CFG_BASE	(CONFIG_SYS_CMA_MB_BASE+0xf200000)
 #if defined(CONFIG_CMA302) && defined(CONFIG_CMA302_SLOT2)
 #define   CMA_MB_S2KBM_BASE	  (CMA_MB_SLOT2CFG_BASE+0x200)
 #endif
@@ -160,7 +160,7 @@
 #endif
 
 #if (CMA_MB_CAPS & CMA_MB_CAP_PCI)
-#define CMA_MB_PCICTL_BASE	(CFG_CMA_MB_BASE+0xf200000)
+#define CMA_MB_PCICTL_BASE	(CONFIG_SYS_CMA_MB_BASE+0xf200000)
 #define   CMA_MB_PCI_V3CTL_BASE	  (CMA_MB_PCICTL_BASE+0x100)
 #define   CMA_MB_PCI_IDSEL_BASE	  (CMA_MB_PCICTL_BASE+0x200)
 #define   CMA_MB_PCI_IMASK_BASE	  (CMA_MB_PCICTL_BASE+0x300)
@@ -171,19 +171,19 @@
 #endif
 
 #if (CMA_MB_CAPS & CMA_MB_CAP_SLOT3)
-#define CMA_MB_SLOT3CFG_BASE	(CFG_CMA_MB_BASE+0xf300000)
+#define CMA_MB_SLOT3CFG_BASE	(CONFIG_SYS_CMA_MB_BASE+0xf300000)
 #if defined(CONFIG_CMA302) && defined(CONFIG_CMA302_SLOT3)
 #define   CMA_MB_S3KBM_BASE	  (CMA_MB_SLOT3CFG_BASE+0x200)
 #endif
 #define CMA_MB_SLOT3CFG_SIZE	0x400
 #endif
 
-#define CMA_MB_ROMHIGH_BASE	(CFG_CMA_MB_BASE+0xf800000)
+#define CMA_MB_ROMHIGH_BASE	(CONFIG_SYS_CMA_MB_BASE+0xf800000)
 #define CMA_MB_ROMHIGH_SIZE	0x800000
 #if (CMA_MB_CAPS & CMA_MB_CAP_FLASH)
-#define CMA_MB_FLHIGH_EXEC_BASE	(CFG_CMA_MB_BASE+0xf800000)
+#define CMA_MB_FLHIGH_EXEC_BASE	(CONFIG_SYS_CMA_MB_BASE+0xf800000)
 #define CMA_MB_FLHIGH_EXEC_SIZE	0x100000
-#define CMA_MB_FLHIGH_RDWR_BASE	(CFG_CMA_MB_BASE+0xfc00000)
+#define CMA_MB_FLHIGH_RDWR_BASE	(CONFIG_SYS_CMA_MB_BASE+0xfc00000)
 #define CMA_MB_FLHIGH_RDWR_SIZE	0x400000
 #endif
 
diff --git a/board/cogent/u-boot.lds b/board/cogent/u-boot.lds
index 59d62e101..5fd9f79b7 100644
--- a/board/cogent/u-boot.lds
+++ b/board/cogent/u-boot.lds
@@ -53,7 +53,7 @@ SECTIONS
   .text      :
   {
     *(.text)
-    common/environment.o(.text)
+    common/env_embedded.o(.text)
     *(.fixup)
     *(.got1)
   }
@@ -122,6 +122,7 @@ SECTIONS
    *(.dynbss)
    *(.bss)
    *(COMMON)
+   . = ALIGN(4);
   }
   _end = . ;
   PROVIDE (end = .);
diff --git a/board/cogent/u-boot.lds.debug b/board/cogent/u-boot.lds.debug
index c33581d25..ea8538900 100644
--- a/board/cogent/u-boot.lds.debug
+++ b/board/cogent/u-boot.lds.debug
@@ -61,7 +61,7 @@ SECTIONS
     lib_generic/crc32.o		(.text)
 
     . = env_offset;
-    common/environment.o(.text)
+    common/env_embedded.o(.text)
 
     *(.text)
     *(.fixup)
diff --git a/board/cpc45/cpc45.c b/board/cpc45/cpc45.c
index f4e867ce7..1178822db 100644
--- a/board/cpc45/cpc45.c
+++ b/board/cpc45/cpc45.c
@@ -27,6 +27,7 @@
 #include <asm/io.h>
 #include <pci.h>
 #include <i2c.h>
+#include <netdev.h>
 
 int sysControlDisplay(int digit, uchar ascii_code);
 extern void Plx9030Init(void);
@@ -71,7 +72,7 @@ phys_size_t initdram (int board_type)
 	uint8_t mber = 0;
 	unsigned int tmp;
 
-	i2c_init(CFG_I2C_SPEED, CFG_I2C_SLAVE);
+	i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
 
 	if (i2c_reg_read (0x50, 2) != 0x04)
 		return 0;	/* Memory type */
@@ -88,7 +89,7 @@ phys_size_t initdram (int board_type)
 	CONFIG_READ_WORD(MCCR2, mccr2);
 	mccr2 &= 0xffff0000;
 
-	start = CFG_SDRAM_BASE;
+	start = CONFIG_SYS_SDRAM_BASE;
 	end = start + (1 << (col + row + 3) ) * bank - 1;
 
 	for (i = 0; i < m; i++) {
@@ -242,8 +243,8 @@ int sysControlDisplay (int digit,	/* number of digit 0..7 */
 
 #if defined(CONFIG_CMD_PCMCIA)
 
-#ifdef CFG_PCMCIA_MEM_ADDR
-volatile unsigned char *pcmcia_mem = (unsigned char*)CFG_PCMCIA_MEM_ADDR;
+#ifdef CONFIG_SYS_PCMCIA_MEM_ADDR
+volatile unsigned char *pcmcia_mem = (unsigned char*)CONFIG_SYS_PCMCIA_MEM_ADDR;
 #endif
 
 int pcmcia_init(void)
@@ -273,3 +274,8 @@ void ide_led (uchar led, uchar status)
 	writeb(val, BCSR_BASE + 0x04);
 }
 # endif
+
+int board_eth_init(bd_t *bis)
+{
+	return pci_eth_init(bis);
+}
diff --git a/board/cpc45/flash.c b/board/cpc45/flash.c
index 37dd182ba..8fe758425 100644
--- a/board/cpc45/flash.c
+++ b/board/cpc45/flash.c
@@ -25,15 +25,15 @@
 #include <mpc824x.h>
 #include <asm/processor.h>
 
-#if defined(CFG_ENV_IS_IN_FLASH)
-# ifndef  CFG_ENV_ADDR
-#  define CFG_ENV_ADDR	(CFG_FLASH_BASE + CFG_ENV_OFFSET)
+#if defined(CONFIG_ENV_IS_IN_FLASH)
+# ifndef  CONFIG_ENV_ADDR
+#  define CONFIG_ENV_ADDR	(CONFIG_SYS_FLASH_BASE + CONFIG_ENV_OFFSET)
 # endif
-# ifndef  CFG_ENV_SIZE
-#  define CFG_ENV_SIZE	CFG_ENV_SECT_SIZE
+# ifndef  CONFIG_ENV_SIZE
+#  define CONFIG_ENV_SIZE	CONFIG_ENV_SECT_SIZE
 # endif
-# ifndef  CFG_ENV_SECT_SIZE
-#  define CFG_ENV_SECT_SIZE  CFG_ENV_SIZE
+# ifndef  CONFIG_ENV_SECT_SIZE
+#  define CONFIG_ENV_SECT_SIZE  CONFIG_ENV_SIZE
 # endif
 #endif
 
@@ -41,7 +41,7 @@
 #define MAIN_SECT_SIZE  0x40000
 #define PARAM_SECT_SIZE 0x8000
 
-flash_info_t flash_info[CFG_MAX_FLASH_BANKS];
+flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];
 
 static int write_data (flash_info_t * info, ulong dest, ulong * data);
 static void write_via_fpu (vu_long * addr, ulong * data);
@@ -81,8 +81,8 @@ unsigned long flash_init (void)
 
 	__asm__ volatile ("sync\n eieio");
 
-	for (i = 0; i < CFG_MAX_FLASH_BANKS; i++) {
-		vu_long *addr = (vu_long *) (CFG_FLASH_BASE + i * FLASH_BANK_SIZE);
+	for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) {
+		vu_long *addr = (vu_long *) (CONFIG_SYS_FLASH_BASE + i * FLASH_BANK_SIZE);
 
 		addr[0] = 0x00900090;
 
@@ -124,17 +124,17 @@ unsigned long flash_init (void)
 		addr[0] = 0xFFFFFFFF;
 
 		flash_info[i].size = FLASH_BANK_SIZE;
-		flash_info[i].sector_count = CFG_MAX_FLASH_SECT;
-		memset (flash_info[i].protect, 0, CFG_MAX_FLASH_SECT);
+		flash_info[i].sector_count = CONFIG_SYS_MAX_FLASH_SECT;
+		memset (flash_info[i].protect, 0, CONFIG_SYS_MAX_FLASH_SECT);
 		for (j = 0; j < flash_info[i].sector_count; j++) {
 			if (j > 30) {
-				flash_info[i].start[j] = CFG_FLASH_BASE +
+				flash_info[i].start[j] = CONFIG_SYS_FLASH_BASE +
 					i * FLASH_BANK_SIZE +
 					(MAIN_SECT_SIZE * 31) + (j -
 								 31) *
 					PARAM_SECT_SIZE;
 			} else {
-				flash_info[i].start[j] = CFG_FLASH_BASE +
+				flash_info[i].start[j] = CONFIG_SYS_FLASH_BASE +
 					i * FLASH_BANK_SIZE +
 					j * MAIN_SECT_SIZE;
 			}
@@ -162,27 +162,27 @@ unsigned long flash_init (void)
 
 	/* Protect monitor and environment sectors
 	 */
-#if CFG_MONITOR_BASE >= CFG_FLASH_BASE + FLASH_BANK_SIZE
+#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE + FLASH_BANK_SIZE
 	flash_protect (FLAG_PROTECT_SET,
-		       CFG_MONITOR_BASE,
-		       CFG_MONITOR_BASE + monitor_flash_len - 1,
+		       CONFIG_SYS_MONITOR_BASE,
+		       CONFIG_SYS_MONITOR_BASE + monitor_flash_len - 1,
 		       &flash_info[1]);
 #else
 	flash_protect (FLAG_PROTECT_SET,
-		       CFG_MONITOR_BASE,
-		       CFG_MONITOR_BASE + monitor_flash_len - 1,
+		       CONFIG_SYS_MONITOR_BASE,
+		       CONFIG_SYS_MONITOR_BASE + monitor_flash_len - 1,
 		       &flash_info[0]);
 #endif
 
-#if (CFG_ENV_IS_IN_FLASH == 1) && defined(CFG_ENV_ADDR)
-#if CFG_ENV_ADDR >= CFG_FLASH_BASE + FLASH_BANK_SIZE
+#if defined(CONFIG_ENV_IS_IN_FLASH) && defined(CONFIG_ENV_ADDR)
+#if CONFIG_ENV_ADDR >= CONFIG_SYS_FLASH_BASE + FLASH_BANK_SIZE
 	flash_protect (FLAG_PROTECT_SET,
-		       CFG_ENV_ADDR,
-		       CFG_ENV_ADDR + CFG_ENV_SIZE - 1, &flash_info[1]);
+		       CONFIG_ENV_ADDR,
+		       CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1, &flash_info[1]);
 #else
 	flash_protect (FLAG_PROTECT_SET,
-		       CFG_ENV_ADDR,
-		       CFG_ENV_ADDR + CFG_ENV_SIZE - 1, &flash_info[0]);
+		       CONFIG_ENV_ADDR,
+		       CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1, &flash_info[0]);
 #endif
 #endif
 
@@ -309,7 +309,7 @@ int flash_erase (flash_info_t * info, int s_first, int s_last)
 			while (((addr[0] & 0x00800080) != 0x00800080) ||
 			       ((addr[1] & 0x00800080) != 0x00800080)) {
 				if ((now = get_timer (start)) >
-				    CFG_FLASH_ERASE_TOUT) {
+				    CONFIG_SYS_FLASH_ERASE_TOUT) {
 					printf ("Timeout\n");
 					addr[0] = 0x00B000B0;	/* suspend erase */
 					addr[0] = 0x00FF00FF;	/* to read mode  */
@@ -486,7 +486,7 @@ static int write_data (flash_info_t * info, ulong dest, ulong * data)
 
 	while (((addr[0] & 0x00800080) != 0x00800080) ||
 	       ((addr[1] & 0x00800080) != 0x00800080)) {
-		if (get_timer (start) > CFG_FLASH_WRITE_TOUT) {
+		if (get_timer (start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
 			addr[0] = 0x00FF00FF;	/* restore read mode */
 			return (1);
 		}
diff --git a/board/cpc45/pd67290.c b/board/cpc45/pd67290.c
index d8f4be516..12c9c746c 100644
--- a/board/cpc45/pd67290.c
+++ b/board/cpc45/pd67290.c
@@ -699,16 +699,16 @@ int i82365_init (void)
 	mem.map = 0;
 	mem.flags = MAP_ATTRIB | MAP_ACTIVE;
 	mem.speed = 300;
-	mem.sys_start = CFG_PCMCIA_MEM_ADDR;
-	mem.sys_stop = CFG_PCMCIA_MEM_ADDR + CFG_PCMCIA_MEM_SIZE - 1;
+	mem.sys_start = CONFIG_SYS_PCMCIA_MEM_ADDR;
+	mem.sys_stop = CONFIG_SYS_PCMCIA_MEM_ADDR + CONFIG_SYS_PCMCIA_MEM_SIZE - 1;
 	mem.card_start = 0;
 	i365_set_mem_map (&socket, &mem);
 
 	mem.map = 1;
 	mem.flags = MAP_ACTIVE;
 	mem.speed = 300;
-	mem.sys_start = CFG_PCMCIA_MEM_ADDR + CFG_PCMCIA_MEM_SIZE;
-	mem.sys_stop = CFG_PCMCIA_MEM_ADDR + (2 * CFG_PCMCIA_MEM_SIZE) - 1;
+	mem.sys_start = CONFIG_SYS_PCMCIA_MEM_ADDR + CONFIG_SYS_PCMCIA_MEM_SIZE;
+	mem.sys_stop = CONFIG_SYS_PCMCIA_MEM_ADDR + (2 * CONFIG_SYS_PCMCIA_MEM_SIZE) - 1;
 	mem.card_start = 0;
 	i365_set_mem_map (&socket, &mem);
 
@@ -794,8 +794,8 @@ static void i82365_dump_regions (pci_dev_t dev)
 {
 	u_int tmp[2];
 	u_int *mem = (void *) socket.cb_phys;
-	u_char *cis = (void *) CFG_PCMCIA_MEM_ADDR;
-	u_char *ide = (void *) (CFG_ATA_BASE_ADDR + CFG_ATA_REG_OFFSET);
+	u_char *cis = (void *) CONFIG_SYS_PCMCIA_MEM_ADDR;
+	u_char *ide = (void *) (CONFIG_SYS_ATA_BASE_ADDR + CONFIG_SYS_ATA_REG_OFFSET);
 
 	pci_read_config_dword (dev, 0x00, tmp + 0);
 	pci_read_config_dword (dev, 0x80, tmp + 1);
diff --git a/board/cpu86/config.mk b/board/cpu86/config.mk
index 00354c46b..5fe0ca088 100644
--- a/board/cpu86/config.mk
+++ b/board/cpu86/config.mk
@@ -25,7 +25,7 @@
 # CPU86 boards
 #
 
-# This should be equal to the CFG_FLASH_BASE define in config_CPU86.h
+# This should be equal to the CONFIG_SYS_FLASH_BASE define in config_CPU86.h
 # for the "final" configuration, with U-Boot in flash, or the address
 # in RAM where U-Boot is loaded at for debugging.
 #
diff --git a/board/cpu86/cpu86.c b/board/cpu86/cpu86.c
index 9e76c72d3..bc7ebfea1 100644
--- a/board/cpu86/cpu86.c
+++ b/board/cpu86/cpu86.c
@@ -225,7 +225,7 @@ static long int try_init (volatile memctl8260_t * memctl, ulong sdmr,
 	 */
 	maxsize = (1 + (~orx | 0x7fff)) / 2;
 
-	/* Since CFG_SDRAM_BASE is always 0 (??), we assume that
+	/* Since CONFIG_SYS_SDRAM_BASE is always 0 (??), we assume that
 	 * we are configuring CS1 if base != 0
 	 */
 	sdmr_ptr = &memctl->memc_psdmr;
@@ -250,7 +250,7 @@ static long int try_init (volatile memctl8260_t * memctl, ulong sdmr,
 	 *  accessing the SDRAM with a single-byte transaction."
 	 *
 	 * The appropriate BRx/ORx registers have already been set when we
-	 * get here. The SDRAM can be accessed at the address CFG_SDRAM_BASE.
+	 * get here. The SDRAM can be accessed at the address CONFIG_SYS_SDRAM_BASE.
 	 */
 
 	*sdmr_ptr = sdmr | PSDMR_OP_PREA;
@@ -261,7 +261,7 @@ static long int try_init (volatile memctl8260_t * memctl, ulong sdmr,
 		*base = c;
 
 	*sdmr_ptr = sdmr | PSDMR_OP_MRW;
-	*(base + CFG_MRS_OFFS) = c;	/* setting MR on address lines */
+	*(base + CONFIG_SYS_MRS_OFFS) = c;	/* setting MR on address lines */
 
 	*sdmr_ptr = sdmr | PSDMR_OP_NORM | PSDMR_RFEN;
 	*base = c;
@@ -275,37 +275,37 @@ static long int try_init (volatile memctl8260_t * memctl, ulong sdmr,
 
 phys_size_t initdram (int board_type)
 {
-	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
 	volatile memctl8260_t *memctl = &immap->im_memctl;
 
-#ifndef CFG_RAMBOOT
+#ifndef CONFIG_SYS_RAMBOOT
 	ulong size8, size9;
 #endif
 	long psize;
 
 	psize = 32 * 1024 * 1024;
 
-	memctl->memc_mptpr = CFG_MPTPR;
-	memctl->memc_psrt = CFG_PSRT;
+	memctl->memc_mptpr = CONFIG_SYS_MPTPR;
+	memctl->memc_psrt = CONFIG_SYS_PSRT;
 
-#ifndef CFG_RAMBOOT
+#ifndef CONFIG_SYS_RAMBOOT
 	/* 60x SDRAM setup:
 	 */
-	size8 = try_init (memctl, CFG_PSDMR_8COL, CFG_OR2_8COL,
-			  (uchar *) CFG_SDRAM_BASE);
-	size9 = try_init (memctl, CFG_PSDMR_9COL, CFG_OR2_9COL,
-			  (uchar *) CFG_SDRAM_BASE);
+	size8 = try_init (memctl, CONFIG_SYS_PSDMR_8COL, CONFIG_SYS_OR2_8COL,
+			  (uchar *) CONFIG_SYS_SDRAM_BASE);
+	size9 = try_init (memctl, CONFIG_SYS_PSDMR_9COL, CONFIG_SYS_OR2_9COL,
+			  (uchar *) CONFIG_SYS_SDRAM_BASE);
 
 	if (size8 < size9) {
 		psize = size9;
 		printf ("(60x:9COL) ");
 	} else {
-		psize = try_init (memctl, CFG_PSDMR_8COL, CFG_OR2_8COL,
-				  (uchar *) CFG_SDRAM_BASE);
+		psize = try_init (memctl, CONFIG_SYS_PSDMR_8COL, CONFIG_SYS_OR2_8COL,
+				  (uchar *) CONFIG_SYS_SDRAM_BASE);
 		printf ("(60x:8COL) ");
 	}
 
-#endif	/* CFG_RAMBOOT */
+#endif	/* CONFIG_SYS_RAMBOOT */
 
 	icache_enable ();
 
@@ -313,9 +313,8 @@ phys_size_t initdram (int board_type)
 }
 
 #if defined(CONFIG_CMD_DOC)
-extern void doc_probe (ulong physadr);
 void doc_init (void)
 {
-	doc_probe (CFG_DOC_BASE);
+	doc_probe (CONFIG_SYS_DOC_BASE);
 }
 #endif
diff --git a/board/cpu86/cpu86.h b/board/cpu86/cpu86.h
index cf7852cef..ca0c39f6b 100644
--- a/board/cpu86/cpu86.h
+++ b/board/cpu86/cpu86.h
@@ -6,19 +6,19 @@
 #define REG8(x)			(*(volatile unsigned char *)(x))
 
 /* CPU86 register definitions */
-#define CPU86_VME_EAC		REG8(CFG_BCRS_BASE + 0x00)
-#define CPU86_VME_SAC		REG8(CFG_BCRS_BASE + 0x01)
-#define CPU86_VME_MAC		REG8(CFG_BCRS_BASE + 0x02)
-#define CPU86_BCR		REG8(CFG_BCRS_BASE + 0x03)
-#define CPU86_BSR		REG8(CFG_BCRS_BASE + 0x04)
-#define CPU86_WDOG_RPORT	REG8(CFG_BCRS_BASE + 0x05)
-#define CPU86_MBOX_IRQ		REG8(CFG_BCRS_BASE + 0x04)
-#define CPU86_REV		REG8(CFG_BCRS_BASE + 0x07)
-#define CPU86_VME_IRQMASK	REG8(CFG_BCRS_BASE + 0x80)
-#define CPU86_VME_IRQSTATUS	REG8(CFG_BCRS_BASE + 0x81)
-#define CPU86_LOCAL_IRQMASK	REG8(CFG_BCRS_BASE + 0x82)
-#define CPU86_LOCAL_IRQSTATUS	REG8(CFG_BCRS_BASE + 0x83)
-#define CPU86_PMCL_IRQSTATUS	REG8(CFG_BCRS_BASE + 0x84)
+#define CPU86_VME_EAC		REG8(CONFIG_SYS_BCRS_BASE + 0x00)
+#define CPU86_VME_SAC		REG8(CONFIG_SYS_BCRS_BASE + 0x01)
+#define CPU86_VME_MAC		REG8(CONFIG_SYS_BCRS_BASE + 0x02)
+#define CPU86_BCR		REG8(CONFIG_SYS_BCRS_BASE + 0x03)
+#define CPU86_BSR		REG8(CONFIG_SYS_BCRS_BASE + 0x04)
+#define CPU86_WDOG_RPORT	REG8(CONFIG_SYS_BCRS_BASE + 0x05)
+#define CPU86_MBOX_IRQ		REG8(CONFIG_SYS_BCRS_BASE + 0x04)
+#define CPU86_REV		REG8(CONFIG_SYS_BCRS_BASE + 0x07)
+#define CPU86_VME_IRQMASK	REG8(CONFIG_SYS_BCRS_BASE + 0x80)
+#define CPU86_VME_IRQSTATUS	REG8(CONFIG_SYS_BCRS_BASE + 0x81)
+#define CPU86_LOCAL_IRQMASK	REG8(CONFIG_SYS_BCRS_BASE + 0x82)
+#define CPU86_LOCAL_IRQSTATUS	REG8(CONFIG_SYS_BCRS_BASE + 0x83)
+#define CPU86_PMCL_IRQSTATUS	REG8(CONFIG_SYS_BCRS_BASE + 0x84)
 
 /* Board Control Register bits */
 #define CPU86_BCR_FWPT		0x01
diff --git a/board/cpu86/flash.c b/board/cpu86/flash.c
index 1535a6b48..8135780c5 100644
--- a/board/cpu86/flash.c
+++ b/board/cpu86/flash.c
@@ -28,7 +28,7 @@
 #include <mpc8xx.h>
 #include "cpu86.h"
 
-flash_info_t flash_info[CFG_MAX_FLASH_BANKS];
+flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];
 
 /*-----------------------------------------------------------------------
  */
@@ -177,7 +177,7 @@ unsigned long flash_init (void)
 
 	/* Init: no FLASHes known
 	 */
-	for (i = 0; i < CFG_MAX_FLASH_BANKS; ++i) {
+	for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
 		flash_info[i].flash_id = FLASH_UNKNOWN;
 	}
 
@@ -186,8 +186,8 @@ unsigned long flash_init (void)
 
 	/* Static FLASH Bank configuration here (only one bank) */
 
-	size_b0 = flash_int_get_size ((ulong *) CFG_FLASH_BASE, &flash_info[0]);
-	size_b1 = flash_amd_get_size ((uchar *) CFG_BOOTROM_BASE, &flash_info[1]);
+	size_b0 = flash_int_get_size ((ulong *) CONFIG_SYS_FLASH_BASE, &flash_info[0]);
+	size_b1 = flash_amd_get_size ((uchar *) CONFIG_SYS_BOOTROM_BASE, &flash_info[1]);
 
 	if (size_b0 > 0 || size_b1 > 0) {
 
@@ -210,40 +210,40 @@ unsigned long flash_init (void)
 	/* protect monitor and environment sectors
 	 */
 
-#if CFG_MONITOR_BASE >= CFG_BOOTROM_BASE
+#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_BOOTROM_BASE
 	if (size_b1) {
-		/* If U-Boot is booted from ROM the CFG_MONITOR_BASE > CFG_FLASH_BASE
+		/* If U-Boot is booted from ROM the CONFIG_SYS_MONITOR_BASE > CONFIG_SYS_FLASH_BASE
 		 * but we shouldn't protect it.
 		 */
 
 		flash_protect  (FLAG_PROTECT_SET,
-				CFG_MONITOR_BASE,
-				CFG_MONITOR_BASE + monitor_flash_len - 1, &flash_info[1]
+				CONFIG_SYS_MONITOR_BASE,
+				CONFIG_SYS_MONITOR_BASE + monitor_flash_len - 1, &flash_info[1]
 		);
 	}
 #else
-#if CFG_MONITOR_BASE >= CFG_FLASH_BASE
+#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE
 	flash_protect (FLAG_PROTECT_SET,
-		       CFG_MONITOR_BASE,
-		       CFG_MONITOR_BASE + monitor_flash_len - 1, &flash_info[0]
+		       CONFIG_SYS_MONITOR_BASE,
+		       CONFIG_SYS_MONITOR_BASE + monitor_flash_len - 1, &flash_info[0]
 	);
 #endif
 #endif
 
-#if (CFG_ENV_IS_IN_FLASH == 1) && defined(CFG_ENV_ADDR)
-# ifndef  CFG_ENV_SIZE
-#  define CFG_ENV_SIZE	CFG_ENV_SECT_SIZE
+#if defined(CONFIG_ENV_IS_IN_FLASH) && defined(CONFIG_ENV_ADDR)
+# ifndef  CONFIG_ENV_SIZE
+#  define CONFIG_ENV_SIZE	CONFIG_ENV_SECT_SIZE
 # endif
-# if CFG_ENV_ADDR >= CFG_BOOTROM_BASE
+# if CONFIG_ENV_ADDR >= CONFIG_SYS_BOOTROM_BASE
 	if (size_b1) {
 		flash_protect (FLAG_PROTECT_SET,
-				CFG_ENV_ADDR,
-				CFG_ENV_ADDR + CFG_ENV_SIZE - 1, &flash_info[1]);
+				CONFIG_ENV_ADDR,
+				CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1, &flash_info[1]);
 	}
 # else
 	flash_protect (FLAG_PROTECT_SET,
-		       CFG_ENV_ADDR,
-		       CFG_ENV_ADDR + CFG_ENV_SIZE - 1, &flash_info[0]);
+		       CONFIG_ENV_ADDR,
+		       CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1, &flash_info[0]);
 # endif
 #endif
 
@@ -382,7 +382,7 @@ int flash_erase (flash_info_t * info, int s_first, int s_last)
 		last  = start;
 		addr = (vu_char *)(info->start[l_sect]);
 		while ((addr[0] & 0x80) != 0x80) {
-			if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+			if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
 				printf ("Timeout\n");
 				return 1;
 			}
@@ -434,7 +434,7 @@ AMD_DONE:
 				last = start;
 				while ((addr[0] & 0x00800080) != 0x00800080 ||
 				   (addr[1] & 0x00800080) != 0x00800080) {
-					if ((now = get_timer (start)) > CFG_FLASH_ERASE_TOUT) {
+					if ((now = get_timer (start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
 						printf ("Timeout (erase suspended!)\n");
 						/* Suspend erase
 						 */
@@ -549,7 +549,7 @@ static int write_word (flash_info_t * info, volatile unsigned long *addr,
 
 	start = get_timer (0);
 	while ((*addr & 0x00800080) != 0x00800080) {
-		if (get_timer (start) > CFG_FLASH_WRITE_TOUT) {
+		if (get_timer (start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
 			/* Suspend program
 			 */
 			*addr = 0x00B000B0;
@@ -604,7 +604,7 @@ static int write_byte (flash_info_t *info, ulong dest, uchar data)
 	/* data polling for D7 */
 	start = get_timer (0);
 	while ((*((vu_char *)dest) & 0x80) != (data & 0x80)) {
-		if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+		if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
 			return (1);
 		}
 	}
diff --git a/board/cpu87/config.mk b/board/cpu87/config.mk
index 6384c7839..6a694a405 100644
--- a/board/cpu87/config.mk
+++ b/board/cpu87/config.mk
@@ -25,7 +25,7 @@
 # CPU87 board
 #
 
-# This should be equal to the CFG_FLASH_BASE define in configs/cpu87.h
+# This should be equal to the CONFIG_SYS_FLASH_BASE define in configs/cpu87.h
 # for the "final" configuration, with U-Boot in flash, or the address
 # in RAM where U-Boot is loaded at for debugging.
 #
diff --git a/board/cpu87/cpu87.c b/board/cpu87/cpu87.c
index f5a5de5d8..057a34c2c 100644
--- a/board/cpu87/cpu87.c
+++ b/board/cpu87/cpu87.c
@@ -26,6 +26,7 @@
 #include <mpc8260.h>
 #include "cpu87.h"
 #include <pci.h>
+#include <netdev.h>
 
 /*
  * I/O Port configuration table
@@ -226,7 +227,7 @@ static long int try_init (volatile memctl8260_t * memctl, ulong sdmr,
 	 */
 	maxsize = (1 + (~orx | 0x7fff)) / 2;
 
-	/* Since CFG_SDRAM_BASE is always 0 (??), we assume that
+	/* Since CONFIG_SYS_SDRAM_BASE is always 0 (??), we assume that
 	 * we are configuring CS1 if base != 0
 	 */
 	sdmr_ptr = &memctl->memc_psdmr;
@@ -251,7 +252,7 @@ static long int try_init (volatile memctl8260_t * memctl, ulong sdmr,
 	 *  accessing the SDRAM with a single-byte transaction."
 	 *
 	 * The appropriate BRx/ORx registers have already been set when we
-	 * get here. The SDRAM can be accessed at the address CFG_SDRAM_BASE.
+	 * get here. The SDRAM can be accessed at the address CONFIG_SYS_SDRAM_BASE.
 	 */
 
 	*sdmr_ptr = sdmr | PSDMR_OP_PREA;
@@ -262,7 +263,7 @@ static long int try_init (volatile memctl8260_t * memctl, ulong sdmr,
 		*base = c;
 
 	*sdmr_ptr = sdmr | PSDMR_OP_MRW;
-	*(base + CFG_MRS_OFFS) = c;	/* setting MR on address lines */
+	*(base + CONFIG_SYS_MRS_OFFS) = c;	/* setting MR on address lines */
 
 	*sdmr_ptr = sdmr | PSDMR_OP_NORM | PSDMR_RFEN;
 	*base = c;
@@ -276,45 +277,45 @@ static long int try_init (volatile memctl8260_t * memctl, ulong sdmr,
 
 phys_size_t initdram (int board_type)
 {
-	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
 	volatile memctl8260_t *memctl = &immap->im_memctl;
 
-#ifndef CFG_RAMBOOT
+#ifndef CONFIG_SYS_RAMBOOT
 	ulong size8, size9, size10;
 #endif
 	long psize;
 
 	psize = 32 * 1024 * 1024;
 
-	memctl->memc_mptpr = CFG_MPTPR;
-	memctl->memc_psrt = CFG_PSRT;
+	memctl->memc_mptpr = CONFIG_SYS_MPTPR;
+	memctl->memc_psrt = CONFIG_SYS_PSRT;
 
-#ifndef CFG_RAMBOOT
+#ifndef CONFIG_SYS_RAMBOOT
 	/* 60x SDRAM setup:
 	 */
-	size8 = try_init (memctl, CFG_PSDMR_8COL, CFG_OR2_8COL,
-			  (uchar *) CFG_SDRAM_BASE);
+	size8 = try_init (memctl, CONFIG_SYS_PSDMR_8COL, CONFIG_SYS_OR2_8COL,
+			  (uchar *) CONFIG_SYS_SDRAM_BASE);
 
-	size9 = try_init (memctl, CFG_PSDMR_9COL, CFG_OR2_9COL,
-			  (uchar *) CFG_SDRAM_BASE);
+	size9 = try_init (memctl, CONFIG_SYS_PSDMR_9COL, CONFIG_SYS_OR2_9COL,
+			  (uchar *) CONFIG_SYS_SDRAM_BASE);
 
-	size10 = try_init (memctl, CFG_PSDMR_10COL, CFG_OR2_10COL,
-			  (uchar *) CFG_SDRAM_BASE);
+	size10 = try_init (memctl, CONFIG_SYS_PSDMR_10COL, CONFIG_SYS_OR2_10COL,
+			  (uchar *) CONFIG_SYS_SDRAM_BASE);
 
 	psize = max(size8,max(size9,size10));
 
 	if (psize == size8) {
-		psize = try_init (memctl, CFG_PSDMR_8COL, CFG_OR2_8COL,
-				  (uchar *) CFG_SDRAM_BASE);
+		psize = try_init (memctl, CONFIG_SYS_PSDMR_8COL, CONFIG_SYS_OR2_8COL,
+				  (uchar *) CONFIG_SYS_SDRAM_BASE);
 		printf ("(60x:8COL) ");
 	} else if (psize == size9){
-		psize = try_init (memctl, CFG_PSDMR_9COL, CFG_OR2_9COL,
-				  (uchar *) CFG_SDRAM_BASE);
+		psize = try_init (memctl, CONFIG_SYS_PSDMR_9COL, CONFIG_SYS_OR2_9COL,
+				  (uchar *) CONFIG_SYS_SDRAM_BASE);
 		printf ("(60x:9COL) ");
 	} else
 		printf ("(60x:10COL) ");
 
-#endif	/* CFG_RAMBOOT */
+#endif	/* CONFIG_SYS_RAMBOOT */
 
 	icache_enable ();
 
@@ -322,10 +323,9 @@ phys_size_t initdram (int board_type)
 }
 
 #if defined(CONFIG_CMD_DOC)
-extern void doc_probe (ulong physadr);
 void doc_init (void)
 {
-	doc_probe (CFG_DOC_BASE);
+	doc_probe (CONFIG_SYS_DOC_BASE);
 }
 #endif
 
@@ -339,3 +339,8 @@ void pci_init_board(void)
 	pci_mpc8250_init(&hose);
 }
 #endif
+
+int board_eth_init(bd_t *bis)
+{
+	return pci_eth_init(bis);
+}
diff --git a/board/cpu87/cpu87.h b/board/cpu87/cpu87.h
index 5dbd4ae07..45cb853a2 100644
--- a/board/cpu87/cpu87.h
+++ b/board/cpu87/cpu87.h
@@ -6,19 +6,19 @@
 #define REG8(x)			(*(volatile unsigned char *)(x))
 
 /* CPU86 register definitions */
-#define CPU86_VME_EAC		REG8(CFG_BCRS_BASE + 0x00)
-#define CPU86_VME_SAC		REG8(CFG_BCRS_BASE + 0x01)
-#define CPU86_VME_MAC		REG8(CFG_BCRS_BASE + 0x02)
-#define CPU86_BCR		REG8(CFG_BCRS_BASE + 0x03)
-#define CPU86_BSR		REG8(CFG_BCRS_BASE + 0x04)
-#define CPU86_WDOG_RPORT	REG8(CFG_BCRS_BASE + 0x05)
-#define CPU86_MBOX_IRQ		REG8(CFG_BCRS_BASE + 0x04)
-#define CPU86_REV		REG8(CFG_BCRS_BASE + 0x07)
-#define CPU86_VME_IRQMASK	REG8(CFG_BCRS_BASE + 0x80)
-#define CPU86_VME_IRQSTATUS	REG8(CFG_BCRS_BASE + 0x81)
-#define CPU86_LOCAL_IRQMASK	REG8(CFG_BCRS_BASE + 0x82)
-#define CPU86_LOCAL_IRQSTATUS	REG8(CFG_BCRS_BASE + 0x83)
-#define CPU86_PMCL_IRQSTATUS	REG8(CFG_BCRS_BASE + 0x84)
+#define CPU86_VME_EAC		REG8(CONFIG_SYS_BCRS_BASE + 0x00)
+#define CPU86_VME_SAC		REG8(CONFIG_SYS_BCRS_BASE + 0x01)
+#define CPU86_VME_MAC		REG8(CONFIG_SYS_BCRS_BASE + 0x02)
+#define CPU86_BCR		REG8(CONFIG_SYS_BCRS_BASE + 0x03)
+#define CPU86_BSR		REG8(CONFIG_SYS_BCRS_BASE + 0x04)
+#define CPU86_WDOG_RPORT	REG8(CONFIG_SYS_BCRS_BASE + 0x05)
+#define CPU86_MBOX_IRQ		REG8(CONFIG_SYS_BCRS_BASE + 0x04)
+#define CPU86_REV		REG8(CONFIG_SYS_BCRS_BASE + 0x07)
+#define CPU86_VME_IRQMASK	REG8(CONFIG_SYS_BCRS_BASE + 0x80)
+#define CPU86_VME_IRQSTATUS	REG8(CONFIG_SYS_BCRS_BASE + 0x81)
+#define CPU86_LOCAL_IRQMASK	REG8(CONFIG_SYS_BCRS_BASE + 0x82)
+#define CPU86_LOCAL_IRQSTATUS	REG8(CONFIG_SYS_BCRS_BASE + 0x83)
+#define CPU86_PMCL_IRQSTATUS	REG8(CONFIG_SYS_BCRS_BASE + 0x84)
 
 /* Board Control Register bits */
 #define CPU86_BCR_FWPT		0x01
diff --git a/board/cpu87/flash.c b/board/cpu87/flash.c
index 076c2f919..c35757b30 100644
--- a/board/cpu87/flash.c
+++ b/board/cpu87/flash.c
@@ -28,7 +28,7 @@
 #include <mpc8xx.h>
 #include "cpu87.h"
 
-flash_info_t flash_info[CFG_MAX_FLASH_BANKS];
+flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];
 
 /*-----------------------------------------------------------------------
  */
@@ -183,7 +183,7 @@ unsigned long flash_init (void)
 
 	/* Init: no FLASHes known
 	 */
-	for (i = 0; i < CFG_MAX_FLASH_BANKS; ++i) {
+	for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
 		flash_info[i].flash_id = FLASH_UNKNOWN;
 	}
 
@@ -192,8 +192,8 @@ unsigned long flash_init (void)
 
 	/* Static FLASH Bank configuration here (only one bank) */
 
-	size_b0 = flash_int_get_size ((ulong *) CFG_FLASH_BASE, &flash_info[0]);
-	size_b1 = flash_amd_get_size ((uchar *) CFG_BOOTROM_BASE, &flash_info[1]);
+	size_b0 = flash_int_get_size ((ulong *) CONFIG_SYS_FLASH_BASE, &flash_info[0]);
+	size_b1 = flash_amd_get_size ((uchar *) CONFIG_SYS_BOOTROM_BASE, &flash_info[1]);
 
 	if (size_b0 > 0 || size_b1 > 0) {
 
@@ -216,40 +216,40 @@ unsigned long flash_init (void)
 	/* protect monitor and environment sectors
 	 */
 
-#if CFG_MONITOR_BASE >= CFG_BOOTROM_BASE
+#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_BOOTROM_BASE
 	if (size_b1) {
-		/* If U-Boot is booted from ROM the CFG_MONITOR_BASE > CFG_FLASH_BASE
+		/* If U-Boot is booted from ROM the CONFIG_SYS_MONITOR_BASE > CONFIG_SYS_FLASH_BASE
 		 * but we shouldn't protect it.
 		 */
 
 		flash_protect  (FLAG_PROTECT_SET,
-				CFG_MONITOR_BASE,
-				CFG_MONITOR_BASE + monitor_flash_len - 1, &flash_info[1]
+				CONFIG_SYS_MONITOR_BASE,
+				CONFIG_SYS_MONITOR_BASE + monitor_flash_len - 1, &flash_info[1]
 		);
 	}
 #else
-#if CFG_MONITOR_BASE >= CFG_FLASH_BASE
+#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE
 	flash_protect (FLAG_PROTECT_SET,
-		       CFG_MONITOR_BASE,
-		       CFG_MONITOR_BASE + monitor_flash_len - 1, &flash_info[0]
+		       CONFIG_SYS_MONITOR_BASE,
+		       CONFIG_SYS_MONITOR_BASE + monitor_flash_len - 1, &flash_info[0]
 	);
 #endif
 #endif
 
-#if (CFG_ENV_IS_IN_FLASH == 1) && defined(CFG_ENV_ADDR)
-# ifndef  CFG_ENV_SIZE
-#  define CFG_ENV_SIZE	CFG_ENV_SECT_SIZE
+#if defined(CONFIG_ENV_IS_IN_FLASH) && defined(CONFIG_ENV_ADDR)
+# ifndef  CONFIG_ENV_SIZE
+#  define CONFIG_ENV_SIZE	CONFIG_ENV_SECT_SIZE
 # endif
-# if CFG_ENV_ADDR >= CFG_BOOTROM_BASE
+# if CONFIG_ENV_ADDR >= CONFIG_SYS_BOOTROM_BASE
 	if (size_b1) {
 		flash_protect (FLAG_PROTECT_SET,
-				CFG_ENV_ADDR,
-				CFG_ENV_ADDR + CFG_ENV_SIZE - 1, &flash_info[1]);
+				CONFIG_ENV_ADDR,
+				CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1, &flash_info[1]);
 	}
 # else
 	flash_protect (FLAG_PROTECT_SET,
-		       CFG_ENV_ADDR,
-		       CFG_ENV_ADDR + CFG_ENV_SIZE - 1, &flash_info[0]);
+		       CONFIG_ENV_ADDR,
+		       CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1, &flash_info[0]);
 # endif
 #endif
 
@@ -391,7 +391,7 @@ int flash_erase (flash_info_t * info, int s_first, int s_last)
 		last  = start;
 		addr = (vu_char *)(info->start[l_sect]);
 		while ((addr[0] & 0x80) != 0x80) {
-			if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+			if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
 				printf ("Timeout\n");
 				return 1;
 			}
@@ -443,7 +443,7 @@ AMD_DONE:
 				last = start;
 				while ((addr[0] & 0x00800080) != 0x00800080 ||
 				   (addr[1] & 0x00800080) != 0x00800080) {
-					if ((now = get_timer (start)) > CFG_FLASH_ERASE_TOUT) {
+					if ((now = get_timer (start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
 						printf ("Timeout (erase suspended!)\n");
 						/* Suspend erase
 						 */
@@ -558,7 +558,7 @@ static int write_word (flash_info_t * info, volatile unsigned long *addr,
 
 	start = get_timer (0);
 	while ((*addr & 0x00800080) != 0x00800080) {
-		if (get_timer (start) > CFG_FLASH_WRITE_TOUT) {
+		if (get_timer (start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
 			/* Suspend program
 			 */
 			*addr = 0x00B000B0;
@@ -613,7 +613,7 @@ static int write_byte (flash_info_t *info, ulong dest, uchar data)
 	/* data polling for D7 */
 	start = get_timer (0);
 	while ((*((vu_char *)dest) & 0x80) != (data & 0x80)) {
-		if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+		if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
 			return (1);
 		}
 	}
diff --git a/board/cradle/flash.c b/board/cradle/flash.c
index f3f9a8cce..b5635fbc2 100644
--- a/board/cradle/flash.c
+++ b/board/cradle/flash.c
@@ -30,7 +30,7 @@
 #define FLASH_BANK_SIZE 0x400000
 #define MAIN_SECT_SIZE  0x20000
 
-flash_info_t flash_info[CFG_MAX_FLASH_BANKS];
+flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];
 
 
 /*-----------------------------------------------------------------------
@@ -41,15 +41,15 @@ ulong flash_init (void)
 	int i, j;
 	ulong size = 0;
 
-	for (i = 0; i < CFG_MAX_FLASH_BANKS; i++) {
+	for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) {
 		ulong flashbase = 0;
 
 		flash_info[i].flash_id =
 			(INTEL_MANUFACT & FLASH_VENDMASK) |
 			(INTEL_ID_28F128J3 & FLASH_TYPEMASK);
 		flash_info[i].size = FLASH_BANK_SIZE;
-		flash_info[i].sector_count = CFG_MAX_FLASH_SECT;
-		memset (flash_info[i].protect, 0, CFG_MAX_FLASH_SECT);
+		flash_info[i].sector_count = CONFIG_SYS_MAX_FLASH_SECT;
+		memset (flash_info[i].protect, 0, CONFIG_SYS_MAX_FLASH_SECT);
 		switch (i) {
 		case 0:
 			flashbase = PHYS_FLASH_1;
@@ -71,13 +71,13 @@ ulong flash_init (void)
 	/* Protect monitor and environment sectors
 	 */
 	flash_protect (FLAG_PROTECT_SET,
-		       CFG_FLASH_BASE,
-		       CFG_FLASH_BASE + monitor_flash_len - 1,
+		       CONFIG_SYS_FLASH_BASE,
+		       CONFIG_SYS_FLASH_BASE + monitor_flash_len - 1,
 		       &flash_info[0]);
 
 	flash_protect (FLAG_PROTECT_SET,
-		       CFG_ENV_ADDR,
-		       CFG_ENV_ADDR + CFG_ENV_SIZE - 1, &flash_info[0]);
+		       CONFIG_ENV_ADDR,
+		       CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1, &flash_info[0]);
 
 	return size;
 }
@@ -88,7 +88,7 @@ void flash_print_info (flash_info_t * info)
 {
 	int i, j;
 
-	for (j = 0; j < CFG_MAX_FLASH_BANKS; j++) {
+	for (j = 0; j < CONFIG_SYS_MAX_FLASH_BANKS; j++) {
 		switch (info->flash_id & FLASH_VENDMASK) {
 		case (INTEL_MANUFACT & FLASH_VENDMASK):
 			printf ("Intel: ");
@@ -183,7 +183,7 @@ int flash_erase (flash_info_t * info, int s_first, int s_last)
 
 			while ((*addr & 0x80) != 0x80) {
 				if (get_timer_masked () >
-				    CFG_FLASH_ERASE_TOUT) {
+				    CONFIG_SYS_FLASH_ERASE_TOUT) {
 					*addr = 0xB0;	/* suspend erase */
 					*addr = 0xFF;	/* reset to read mode */
 					rc = ERR_TIMOUT;
@@ -250,7 +250,7 @@ static int write_word (flash_info_t * info, ulong dest, ushort data)
 
 	/* wait while polling the status register */
 	while (((val = *addr) & 0x80) != 0x80) {
-		if (get_timer_masked () > CFG_FLASH_WRITE_TOUT) {
+		if (get_timer_masked () > CONFIG_SYS_FLASH_WRITE_TOUT) {
 			rc = ERR_TIMOUT;
 			/* suspend program command */
 			*addr = 0xB0;
diff --git a/board/cradle/lowlevel_init.S b/board/cradle/lowlevel_init.S
index 2fd307f1d..6b5cfb922 100644
--- a/board/cradle/lowlevel_init.S
+++ b/board/cradle/lowlevel_init.S
@@ -24,7 +24,7 @@
 #include <version.h>
 #include <asm/arch/pxa-regs.h>
 
-DRAM_SIZE:  .long   CFG_DRAM_SIZE
+DRAM_SIZE:  .long   CONFIG_SYS_DRAM_SIZE
 
 /* wait for coprocessor write complete */
    .macro CPWAIT reg
@@ -51,98 +51,98 @@ lowlevel_init:
     /* Set up GPIO pins first */
 
    ldr      r0,   =GPSR0
-   ldr      r1,   =CFG_GPSR0_VAL
+   ldr      r1,   =CONFIG_SYS_GPSR0_VAL
    str      r1,   [r0]
 
    ldr      r0,   =GPSR1
-   ldr      r1,   =CFG_GPSR1_VAL
+   ldr      r1,   =CONFIG_SYS_GPSR1_VAL
    str      r1,   [r0]
 
    ldr      r0,   =GPSR2
-   ldr      r1,   =CFG_GPSR2_VAL
+   ldr      r1,   =CONFIG_SYS_GPSR2_VAL
    str      r1,   [r0]
 
    ldr      r0,   =GPCR0
-   ldr      r1,   =CFG_GPCR0_VAL
+   ldr      r1,   =CONFIG_SYS_GPCR0_VAL
    str      r1,   [r0]
 
    ldr      r0,   =GPCR1
-   ldr      r1,   =CFG_GPCR1_VAL
+   ldr      r1,   =CONFIG_SYS_GPCR1_VAL
    str      r1,   [r0]
 
    ldr      r0,   =GPCR2
-   ldr      r1,   =CFG_GPCR2_VAL
+   ldr      r1,   =CONFIG_SYS_GPCR2_VAL
    str      r1,   [r0]
 
    ldr      r0,   =GRER0
-   ldr      r1,   =CFG_GRER0_VAL
+   ldr      r1,   =CONFIG_SYS_GRER0_VAL
    str      r1,   [r0]
 
    ldr      r0,   =GRER1
-   ldr      r1,   =CFG_GRER1_VAL
+   ldr      r1,   =CONFIG_SYS_GRER1_VAL
    str      r1,   [r0]
 
    ldr      r0,   =GRER2
-   ldr      r1,   =CFG_GRER2_VAL
+   ldr      r1,   =CONFIG_SYS_GRER2_VAL
    str      r1,   [r0]
 
    ldr      r0,   =GFER0
-   ldr      r1,   =CFG_GFER0_VAL
+   ldr      r1,   =CONFIG_SYS_GFER0_VAL
    str      r1,   [r0]
 
    ldr      r0,   =GFER1
-   ldr      r1,   =CFG_GFER1_VAL
+   ldr      r1,   =CONFIG_SYS_GFER1_VAL
    str      r1,   [r0]
 
    ldr      r0,   =GFER2
-   ldr      r1,   =CFG_GFER2_VAL
+   ldr      r1,   =CONFIG_SYS_GFER2_VAL
    str      r1,   [r0]
 
    ldr      r0,   =GPDR0
-   ldr      r1,   =CFG_GPDR0_VAL
+   ldr      r1,   =CONFIG_SYS_GPDR0_VAL
    str      r1,   [r0]
 
    ldr      r0,   =GPDR1
-   ldr      r1,   =CFG_GPDR1_VAL
+   ldr      r1,   =CONFIG_SYS_GPDR1_VAL
    str      r1,   [r0]
 
    ldr      r0,   =GPDR2
-   ldr      r1,   =CFG_GPDR2_VAL
+   ldr      r1,   =CONFIG_SYS_GPDR2_VAL
    str      r1,   [r0]
 
    ldr      r0,   =GAFR0_L
-   ldr      r1,   =CFG_GAFR0_L_VAL
+   ldr      r1,   =CONFIG_SYS_GAFR0_L_VAL
    str      r1,   [r0]
 
    ldr      r0,   =GAFR0_U
-   ldr      r1,   =CFG_GAFR0_U_VAL
+   ldr      r1,   =CONFIG_SYS_GAFR0_U_VAL
    str      r1,   [r0]
 
    ldr      r0,   =GAFR1_L
-   ldr      r1,   =CFG_GAFR1_L_VAL
+   ldr      r1,   =CONFIG_SYS_GAFR1_L_VAL
    str      r1,   [r0]
 
    ldr      r0,   =GAFR1_U
-   ldr      r1,   =CFG_GAFR1_U_VAL
+   ldr      r1,   =CONFIG_SYS_GAFR1_U_VAL
    str      r1,   [r0]
 
    ldr      r0,   =GAFR2_L
-   ldr      r1,   =CFG_GAFR2_L_VAL
+   ldr      r1,   =CONFIG_SYS_GAFR2_L_VAL
    str      r1,   [r0]
 
    ldr      r0,   =GAFR2_U
-   ldr      r1,   =CFG_GAFR2_U_VAL
+   ldr      r1,   =CONFIG_SYS_GAFR2_U_VAL
    str      r1,   [r0]
 
    /* enable GPIO pins */
    ldr      r0,   =PSSR
-   ldr      r1,   =CFG_PSSR_VAL
+   ldr      r1,   =CONFIG_SYS_PSSR_VAL
    str      r1,   [r0]
 
    SET_LED 1
 
    ldr    r3, =MSC1             /* low - bank 2 Lubbock Registers / SRAM */
-   ldr    r2, =CFG_MSC1_VAL     /* high - bank 3 Ethernet Controller */
+   ldr    r2, =CONFIG_SYS_MSC1_VAL     /* high - bank 3 Ethernet Controller */
    str    r2, [r3]              /* need to set MSC1 before trying to write to the HEX LEDs */
    ldr    r2, [r3]              /* need to read it back to make sure the value latches (see MSC section of manual) */
 
@@ -181,47 +181,47 @@ mem_init:
    @ Step 2a
    @ write msc0, read back to ensure data latches
    @
-   ldr     r2,   =CFG_MSC0_VAL
+   ldr     r2,   =CONFIG_SYS_MSC0_VAL
    str     r2,   [r1, #MSC0_OFFSET]
    ldr     r2,   [r1, #MSC0_OFFSET]
 
    @ write msc1
-   ldr     r2,  =CFG_MSC1_VAL
+   ldr     r2,  =CONFIG_SYS_MSC1_VAL
    str     r2,  [r1, #MSC1_OFFSET]
    ldr     r2,  [r1, #MSC1_OFFSET]
 
    @ write msc2
-   ldr     r2,  =CFG_MSC2_VAL
+   ldr     r2,  =CONFIG_SYS_MSC2_VAL
    str     r2,  [r1, #MSC2_OFFSET]
    ldr     r2,  [r1, #MSC2_OFFSET]
 
    @ Step 2b
    @ write mecr
-   ldr     r2,  =CFG_MECR_VAL
+   ldr     r2,  =CONFIG_SYS_MECR_VAL
    str     r2,  [r1, #MECR_OFFSET]
 
    @ write mcmem0
-   ldr     r2,  =CFG_MCMEM0_VAL
+   ldr     r2,  =CONFIG_SYS_MCMEM0_VAL
    str     r2,  [r1, #MCMEM0_OFFSET]
 
    @ write mcmem1
-   ldr     r2,  =CFG_MCMEM1_VAL
+   ldr     r2,  =CONFIG_SYS_MCMEM1_VAL
    str     r2,  [r1, #MCMEM1_OFFSET]
 
    @ write mcatt0
-   ldr     r2,  =CFG_MCATT0_VAL
+   ldr     r2,  =CONFIG_SYS_MCATT0_VAL
    str     r2,  [r1, #MCATT0_OFFSET]
 
    @ write mcatt1
-   ldr     r2,  =CFG_MCATT1_VAL
+   ldr     r2,  =CONFIG_SYS_MCATT1_VAL
    str     r2,  [r1, #MCATT1_OFFSET]
 
    @ write mcio0
-   ldr     r2,  =CFG_MCIO0_VAL
+   ldr     r2,  =CONFIG_SYS_MCIO0_VAL
    str     r2,  [r1, #MCIO0_OFFSET]
 
    @ write mcio1
-   ldr     r2,  =CFG_MCIO1_VAL
+   ldr     r2,  =CONFIG_SYS_MCIO1_VAL
    str     r2,  [r1, #MCIO1_OFFSET]
 
    /*SET_LED 3 */
@@ -229,14 +229,14 @@ mem_init:
    @ Step 2c
    @ fly-by-dma is defeatured on this part
    @ write flycnfg
-   @ldr     r2,  =CFG_FLYCNFG_VAL
+   @ldr     r2,  =CONFIG_SYS_FLYCNFG_VAL
    @str     r2,  [r1, #FLYCNFG_OFFSET]
 
 /* FIXME Does this sequence really make sense */
 #ifdef REDBOOT_WAY
    @ Step 2d
    @ get the mdrefr settings
-   ldr     r3,  =CFG_MDREFR_VAL
+   ldr     r3,  =CONFIG_SYS_MDREFR_VAL
 
    @ extract DRI field (we need a valid DRI field)
    @
@@ -319,7 +319,7 @@ mem_init:
 #else
    @ Step 2d
    @ get the mdrefr settings
-   ldr     r3,  =CFG_MDREFR_VAL
+   ldr     r3,  =CONFIG_SYS_MDREFR_VAL
 
    @ write back mdrefr
    @
@@ -363,7 +363,7 @@ mem_init:
    @ Step 4d
    @ fetch platform value of mdcnfg
    @
-   ldr     r2,  =CFG_MDCNFG_VAL
+   ldr     r2,  =CONFIG_SYS_MDCNFG_VAL
 
    @ disable all sdram banks
    @
@@ -400,7 +400,7 @@ mem_init:
    @ Access memory *not yet enabled* for CBR refresh cycles (8)
    @ - CBR is generated for all banks
 
-   ldr     r2, =CFG_DRAM_BASE
+   ldr     r2, =CONFIG_SYS_DRAM_BASE
    str     r2, [r2]
    str     r2, [r2]
    str     r2, [r2]
@@ -430,7 +430,7 @@ mem_init:
    @ Step 4h
    @ write mdmrs
    @
-   ldr     r2,  =CFG_MDMRS_VAL
+   ldr     r2,  =CONFIG_SYS_MDMRS_VAL
    str     r2,  [r1, #MDMRS_OFFSET]
 
    @ Done Memory Init
@@ -449,7 +449,7 @@ mem_init:
 
    @ Set interrupt mask register
    @
-   ldr     r1,  =CFG_ICMR_VAL
+   ldr     r1,  =CONFIG_SYS_ICMR_VAL
    ldr     r2,  =ICMR
    str     r1,  [r2]
 
@@ -465,7 +465,7 @@ mem_init:
 
    @ set core clocks
    @
-   ldr     r2,  =CFG_CCCR_VAL
+   ldr     r2,  =CONFIG_SYS_CCCR_VAL
    ldr     r1,  =CCCR
    str     r2,  [r1]
 
@@ -488,7 +488,7 @@ mem_init:
 	@ Turn on needed clocks
 	@
    ldr     r1,  =CKEN
-   ldr     r2,  =CFG_CKEN_VAL
+   ldr     r2,  =CONFIG_SYS_CKEN_VAL
    str     r2,  [r1]
 
    /*SET_LED 7 */
diff --git a/board/cradle/u-boot.lds b/board/cradle/u-boot.lds
index 14d264a68..7cf9fdf63 100644
--- a/board/cradle/u-boot.lds
+++ b/board/cradle/u-boot.lds
@@ -51,6 +51,6 @@ SECTIONS
 
 	. = ALIGN(4);
 	__bss_start = .;
-	.bss (NOLOAD) : { *(.bss) }
+	.bss (NOLOAD) : { *(.bss) . = ALIGN(4); }
 	_end = .;
 }
diff --git a/board/cray/L1/L1.c b/board/cray/L1/L1.c
index f0dfa07fd..1c82bdf12 100644
--- a/board/cray/L1/L1.c
+++ b/board/cray/L1/L1.c
@@ -139,7 +139,7 @@ int misc_init_r (void)
 	struct rtc_time tm;
 	char bootcmd[32];
 
-	hdr = (image_header_t *) (CFG_MONITOR_BASE - image_get_header_size ());
+	hdr = (image_header_t *) (CONFIG_SYS_MONITOR_BASE - image_get_header_size ());
 #if defined(CONFIG_FIT)
 	if (genimg_get_format ((void *)hdr) != IMAGE_FORMAT_LEGACY) {
 		puts ("Non legacy image format not supported\n");
@@ -181,9 +181,9 @@ int rtc_get (struct rtc_time *tmp)
 {
 	return 0;
 }
-void rtc_set (struct rtc_time *tmp)
+int rtc_set (struct rtc_time *tmp)
 {
-	return;
+	return 0;
 }
 void rtc_reset (void)
 {
@@ -205,13 +205,13 @@ static void init_sdram (void)
 /* To set the appropriate timings, we need to know the SDRAM speed.	*/
 /* We can use the PLB speed since the SDRAM speed is the same as	*/
 /* the PLB speed. The PLB speed is the FBK divider times the		*/
-/* 405GP reference clock, which on the L1 is 25Mhz.			*/
-/* Thus, if FBK div is 2, SDRAM is 50Mhz; if FBK div is 3, SDRAM is	*/
-/* 150Mhz; if FBK is 3, SDRAM is 150Mhz.				*/
+/* 405GP reference clock, which on the L1 is 25MHz.			*/
+/* Thus, if FBK div is 2, SDRAM is 50MHz; if FBK div is 3, SDRAM is	*/
+/* 150MHz; if FBK is 3, SDRAM is 150MHz.				*/
 
 	/* divisor = ((mfdcr(strap)>> 28) & 0x3); */
 
-/* write SDRAM timing for 100Mhz. */
+/* write SDRAM timing for 100MHz. */
 	mtdcr (memcfga, mem_sdtr1);
 	mtdcr (memcfgd, 0x0086400D);
 
diff --git a/board/cray/L1/flash.c b/board/cray/L1/flash.c
index f3132740e..36d186fb9 100644
--- a/board/cray/L1/flash.c
+++ b/board/cray/L1/flash.c
@@ -43,7 +43,7 @@
 #define FLASH_AM320B    0x0009
 
 
-flash_info_t	flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips	*/
+flash_info_t	flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips	*/
 
 /*-----------------------------------------------------------------------
  * Functions
@@ -65,7 +65,7 @@ unsigned long flash_init (void)
 	int i;
 
 	/* Init: no FLASHes known */
-	for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) {
+	for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
 		flash_info[i].flash_id = FLASH_UNKNOWN;
 	}
 
@@ -79,7 +79,7 @@ unsigned long flash_init (void)
 	}
 
 	/* Only one bank */
-	if (CFG_MAX_FLASH_BANKS == 1)
+	if (CONFIG_SYS_MAX_FLASH_BANKS == 1)
 	  {
 	    /* Setup offsets */
 	    flash_get_offsets (FLASH_BASE0_PRELIM, &flash_info[0]);
@@ -253,7 +253,7 @@ int wait_for_DQ7(flash_info_t *info, int sect)
 	start = get_timer (0);
     last  = start;
     while ((addr[0] & (FLASH_WORD_SIZE)0x00800080) != (FLASH_WORD_SIZE)0x00800080) {
-	if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+	if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
 	    printf ("Timeout\n");
 	    return -1;
 	}
@@ -457,7 +457,7 @@ static int write_word (flash_info_t *info, ulong dest, ulong data)
 	    start = get_timer (0);
 	    while ((dest2[i] & (FLASH_WORD_SIZE)0x00800080) !=
 		   (data2[i] & (FLASH_WORD_SIZE)0x00800080)) {
-	      if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+	      if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
 		return (1);
 	      }
 	    }
diff --git a/board/cray/L1/u-boot.lds b/board/cray/L1/u-boot.lds
index a6bbef3dc..d278866d5 100644
--- a/board/cray/L1/u-boot.lds
+++ b/board/cray/L1/u-boot.lds
@@ -68,14 +68,14 @@ SECTIONS
     cpu/ppc4xx/4xx_uart.o	(.text)
     cpu/ppc4xx/cpu_init.o	(.text)
     cpu/ppc4xx/speed.o	(.text)
-    cpu/ppc4xx/4xx_enet.o	(.text)
+    drivers/net/4xx_enet.o	(.text)
     common/dlmalloc.o	(.text)
     lib_generic/crc32.o		(.text)
     lib_ppc/extable.o	(.text)
     lib_generic/zlib.o		(.text)
 
 /*. = env_offset;*/
-    common/environment.o(.text)
+    common/env_embedded.o(.text)
 
     *(.text)
     *(.fixup)
@@ -146,6 +146,7 @@ SECTIONS
    *(.dynbss)
    *(.bss)
    *(COMMON)
+   . = ALIGN(4);
   }
   _end = . ;
   PROVIDE (end = .);
diff --git a/board/cray/L1/u-boot.lds.debug b/board/cray/L1/u-boot.lds.debug
index 0552994f4..338392a07 100644
--- a/board/cray/L1/u-boot.lds.debug
+++ b/board/cray/L1/u-boot.lds.debug
@@ -61,7 +61,7 @@ SECTIONS
     lib_generic/crc32.o		(.text)
     lib_ppc/extable.o	(.text)
 
-    common/environment.o(.text)
+    common/env_embedded.o(.text)
 
     *(.text)
     *(.fixup)
diff --git a/board/csb226/flash.c b/board/csb226/flash.c
index f6dfd9617..02ded1c45 100644
--- a/board/csb226/flash.c
+++ b/board/csb226/flash.c
@@ -37,7 +37,7 @@
 #define FLASH_BANK_SIZE 0x02000000
 #define MAIN_SECT_SIZE	0x40000		/* 2x16 = 256k per sector */
 
-flash_info_t	flash_info[CFG_MAX_FLASH_BANKS];
+flash_info_t	flash_info[CONFIG_SYS_MAX_FLASH_BANKS];
 
 
 /**
@@ -51,14 +51,14 @@ ulong flash_init(void)
 	int i, j;
 	ulong size = 0;
 
-	for (i = 0; i < CFG_MAX_FLASH_BANKS; i++) {
+	for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) {
 		ulong flashbase = 0;
 		flash_info[i].flash_id =
 			(INTEL_MANUFACT & FLASH_VENDMASK) |
 			(INTEL_ID_28F128J3 & FLASH_TYPEMASK);
 		flash_info[i].size = FLASH_BANK_SIZE;
-		flash_info[i].sector_count = CFG_MAX_FLASH_SECT;
-		memset(flash_info[i].protect, 0, CFG_MAX_FLASH_SECT);
+		flash_info[i].sector_count = CONFIG_SYS_MAX_FLASH_SECT;
+		memset(flash_info[i].protect, 0, CONFIG_SYS_MAX_FLASH_SECT);
 
 		switch (i) {
 		case 0:
@@ -76,13 +76,13 @@ ulong flash_init(void)
 
 	/* Protect monitor and environment sectors */
 	flash_protect(FLAG_PROTECT_SET,
-			CFG_FLASH_BASE,
-			CFG_FLASH_BASE + monitor_flash_len - 1,
+			CONFIG_SYS_FLASH_BASE,
+			CONFIG_SYS_FLASH_BASE + monitor_flash_len - 1,
 			&flash_info[0]);
 
 	flash_protect(FLAG_PROTECT_SET,
-			CFG_ENV_ADDR,
-			CFG_ENV_ADDR + CFG_ENV_SIZE - 1,
+			CONFIG_ENV_ADDR,
+			CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1,
 			&flash_info[0]);
 
 	return size;
@@ -97,7 +97,7 @@ void flash_print_info  (flash_info_t *info)
 {
 	int i, j;
 
-	for (j=0; j<CFG_MAX_FLASH_BANKS; j++) {
+	for (j=0; j<CONFIG_SYS_MAX_FLASH_BANKS; j++) {
 
 		switch (info->flash_id & FLASH_VENDMASK) {
 		case (INTEL_MANUFACT & FLASH_VENDMASK):
@@ -189,7 +189,7 @@ int flash_erase(flash_info_t *info, int s_first, int s_last)
 			*addr = 0x00D000D0;	/* erase confirm */
 
 			while ((*addr & 0x00800080) != 0x00800080) {
-				if (get_timer_masked() > CFG_FLASH_ERASE_TOUT) {
+				if (get_timer_masked() > CONFIG_SYS_FLASH_ERASE_TOUT) {
 					*addr = 0x00B000B0; /* suspend erase*/
 					*addr = 0x00FF00FF; /* read mode    */
 					rc = ERR_TIMOUT;
@@ -251,7 +251,7 @@ static int write_long (flash_info_t *info, ulong dest, ulong data)
 
 	/* wait while polling the status register */
 	while(((val = *addr) & 0x00800080) != 0x00800080) {
-		if (get_timer_masked() > CFG_FLASH_WRITE_TOUT) {
+		if (get_timer_masked() > CONFIG_SYS_FLASH_WRITE_TOUT) {
 			rc = ERR_TIMOUT;
 			/* suspend program command */
 			*addr = 0x00B000B0;
diff --git a/board/csb226/lowlevel_init.S b/board/csb226/lowlevel_init.S
index 4c9f10ffb..9892430a1 100644
--- a/board/csb226/lowlevel_init.S
+++ b/board/csb226/lowlevel_init.S
@@ -29,7 +29,7 @@
 #include <version.h>
 #include <asm/arch/pxa-regs.h>
 
-DRAM_SIZE:  .long   CFG_DRAM_SIZE
+DRAM_SIZE:  .long   CONFIG_SYS_DRAM_SIZE
 
 /* wait for coprocessor write complete */
    .macro CPWAIT reg
@@ -54,71 +54,71 @@ lowlevel_init:
 	/* Set up GPIO pins first ----------------------------------------- */
 
 	ldr		r0,	=GPSR0
-	ldr		r1,	=CFG_GPSR0_VAL
+	ldr		r1,	=CONFIG_SYS_GPSR0_VAL
 	str		r1,   [r0]
 
 	ldr		r0,	=GPSR1
-	ldr		r1,	=CFG_GPSR1_VAL
+	ldr		r1,	=CONFIG_SYS_GPSR1_VAL
 	str		r1,   [r0]
 
 	ldr		r0,	=GPSR2
-	ldr		r1,	=CFG_GPSR2_VAL
+	ldr		r1,	=CONFIG_SYS_GPSR2_VAL
 	str		r1,   [r0]
 
 	ldr		r0,	=GPCR0
-	ldr		r1,	=CFG_GPCR0_VAL
+	ldr		r1,	=CONFIG_SYS_GPCR0_VAL
 	str		r1,   [r0]
 
 	ldr		r0,	=GPCR1
-	ldr		r1,	=CFG_GPCR1_VAL
+	ldr		r1,	=CONFIG_SYS_GPCR1_VAL
 	str		r1,   [r0]
 
 	ldr		r0,	=GPCR2
-	ldr		r1,	=CFG_GPCR2_VAL
+	ldr		r1,	=CONFIG_SYS_GPCR2_VAL
 	str		r1,   [r0]
 
 	ldr		r0,	=GPDR0
-	ldr		r1,	=CFG_GPDR0_VAL
+	ldr		r1,	=CONFIG_SYS_GPDR0_VAL
 	str		r1,   [r0]
 
 	ldr		r0,	=GPDR1
-	ldr		r1,	=CFG_GPDR1_VAL
+	ldr		r1,	=CONFIG_SYS_GPDR1_VAL
 	str		r1,   [r0]
 
 	ldr		r0,	=GPDR2
-	ldr		r1,	=CFG_GPDR2_VAL
+	ldr		r1,	=CONFIG_SYS_GPDR2_VAL
 	str		r1,   [r0]
 
 	ldr		r0,	=GAFR0_L
-	ldr		r1,	=CFG_GAFR0_L_VAL
+	ldr		r1,	=CONFIG_SYS_GAFR0_L_VAL
 	str		r1,   [r0]
 
 	ldr		r0,	=GAFR0_U
-	ldr		r1,	=CFG_GAFR0_U_VAL
+	ldr		r1,	=CONFIG_SYS_GAFR0_U_VAL
 	str		r1,   [r0]
 
 	ldr		r0,	=GAFR1_L
-	ldr		r1,	=CFG_GAFR1_L_VAL
+	ldr		r1,	=CONFIG_SYS_GAFR1_L_VAL
 	str		r1,   [r0]
 
 	ldr		r0,	=GAFR1_U
-	ldr		r1,	=CFG_GAFR1_U_VAL
+	ldr		r1,	=CONFIG_SYS_GAFR1_U_VAL
 	str		r1,   [r0]
 
 	ldr		r0,	=GAFR2_L
-	ldr		r1,	=CFG_GAFR2_L_VAL
+	ldr		r1,	=CONFIG_SYS_GAFR2_L_VAL
 	str		r1,   [r0]
 
 	ldr		r0,	=GAFR2_U
-	ldr		r1,	=CFG_GAFR2_U_VAL
+	ldr		r1,	=CONFIG_SYS_GAFR2_U_VAL
 	str		r1,   [r0]
 
 	ldr	r0,	=PSSR		/* enable GPIO pins */
-	ldr		r1,	=CFG_PSSR_VAL
+	ldr		r1,	=CONFIG_SYS_PSSR_VAL
 	str		r1,   [r0]
 
 /*	ldr	r3,	=MSC1		/  low - bank 2 Lubbock Registers / SRAM */
-/*	ldr	r2,	=CFG_MSC1_VAL	/  high - bank 3 Ethernet Controller */
+/*	ldr	r2,	=CONFIG_SYS_MSC1_VAL	/  high - bank 3 Ethernet Controller */
 /*	str	r2,	[r3]		/  need to set MSC1 before trying to write to the HEX LEDs */
 /*	ldr	r2,	[r3]		/  need to read it back to make sure the value latches (see MSC section of manual) */
 /* */
@@ -168,17 +168,17 @@ mem_init:
 	/* MSC registers: timing, bus width, mem type                       */
 
 	/* MSC0: nCS(0,1)                                                   */
-	ldr     r2,   =CFG_MSC0_VAL
+	ldr     r2,   =CONFIG_SYS_MSC0_VAL
 	str     r2,   [r1, #MSC0_OFFSET]
 	ldr     r2,   [r1, #MSC0_OFFSET]	/* read back to ensure      */
 						/* that data latches        */
 	/* MSC1: nCS(2,3)                                                   */
-	ldr     r2,  =CFG_MSC1_VAL
+	ldr     r2,  =CONFIG_SYS_MSC1_VAL
 	str     r2,  [r1, #MSC1_OFFSET]
 	ldr     r2,  [r1, #MSC1_OFFSET]
 
 	/* MSC2: nCS(4,5)                                                   */
-	ldr     r2,  =CFG_MSC2_VAL
+	ldr     r2,  =CONFIG_SYS_MSC2_VAL
 	str     r2,  [r1, #MSC2_OFFSET]
 	ldr     r2,  [r1, #MSC2_OFFSET]
 
@@ -187,37 +187,37 @@ mem_init:
 	/* ---------------------------------------------------------------- */
 
 	/* MECR: Memory Expansion Card Register                             */
-	ldr     r2,  =CFG_MECR_VAL
+	ldr     r2,  =CONFIG_SYS_MECR_VAL
 	str     r2,  [r1, #MECR_OFFSET]
 	ldr	r2,	[r1, #MECR_OFFSET]
 
 	/* MCMEM0: Card Interface slot 0 timing                             */
-	ldr     r2,  =CFG_MCMEM0_VAL
+	ldr     r2,  =CONFIG_SYS_MCMEM0_VAL
 	str     r2,  [r1, #MCMEM0_OFFSET]
 	ldr	r2,	[r1, #MCMEM0_OFFSET]
 
 	/* MCMEM1: Card Interface slot 1 timing                             */
-	ldr     r2,  =CFG_MCMEM1_VAL
+	ldr     r2,  =CONFIG_SYS_MCMEM1_VAL
 	str     r2,  [r1, #MCMEM1_OFFSET]
 	ldr	r2,	[r1, #MCMEM1_OFFSET]
 
 	/* MCATT0: Card Interface Attribute Space Timing, slot 0            */
-	ldr     r2,  =CFG_MCATT0_VAL
+	ldr     r2,  =CONFIG_SYS_MCATT0_VAL
 	str     r2,  [r1, #MCATT0_OFFSET]
 	ldr	r2,	[r1, #MCATT0_OFFSET]
 
 	/* MCATT1: Card Interface Attribute Space Timing, slot 1            */
-	ldr     r2,  =CFG_MCATT1_VAL
+	ldr     r2,  =CONFIG_SYS_MCATT1_VAL
 	str     r2,  [r1, #MCATT1_OFFSET]
 	ldr	r2,	[r1, #MCATT1_OFFSET]
 
 	/* MCIO0: Card Interface I/O Space Timing, slot 0                   */
-	ldr     r2,  =CFG_MCIO0_VAL
+	ldr     r2,  =CONFIG_SYS_MCIO0_VAL
 	str     r2,  [r1, #MCIO0_OFFSET]
 	ldr	r2,	[r1, #MCIO0_OFFSET]
 
 	/* MCIO1: Card Interface I/O Space Timing, slot 1                   */
-	ldr     r2,  =CFG_MCIO1_VAL
+	ldr     r2,  =CONFIG_SYS_MCIO1_VAL
 	str     r2,  [r1, #MCIO1_OFFSET]
 	ldr	r2,	[r1, #MCIO1_OFFSET]
 
@@ -239,7 +239,7 @@ mem_init:
 	/* Before accessing MDREFR we need a valid DRI field, so we set     */
 	/* this to power on defaults + DRI field.                           */
 
-	ldr	r3,	=CFG_MDREFR_VAL
+	ldr	r3,	=CONFIG_SYS_MDREFR_VAL
 	ldr	r2,	=0xFFF
 	and	r3,	r3, r2
 	ldr	r4,	=0x03ca4000
@@ -269,7 +269,7 @@ mem_init:
 	/* Step 4a: assert MDREFR:K?RUN and configure                       */
 	/*          MDREFR:K1DB2 and MDREFR:K2DB2 as desired.               */
 
-	ldr	r4,	=CFG_MDREFR_VAL
+	ldr	r4,	=CONFIG_SYS_MDREFR_VAL
 	str	r4,	[r1, #MDREFR_OFFSET]	/* write back MDREFR        */
 	ldr	r4,	[r1, #MDREFR_OFFSET]
 
@@ -292,7 +292,7 @@ mem_init:
 	/* Step 4d: write MDCNFG with MDCNFG:DEx deasserted (set to 0), to  */
 	/*          configure but not enable each SDRAM partition pair.     */
 
-	ldr	r4,	=CFG_MDCNFG_VAL
+	ldr	r4,	=CONFIG_SYS_MDCNFG_VAL
 	bic	r4,	r4,	#(MDCNFG_DE0|MDCNFG_DE1)
 
 	str     r4,     [r1, #MDCNFG_OFFSET]	/* write back MDCNFG        */
@@ -325,7 +325,7 @@ mem_init:
 	/*          Jan 2003, Errata #116, page 30.                         */
 
 
-	ldr	r3,	=CFG_DRAM_BASE
+	ldr	r3,	=CONFIG_SYS_DRAM_BASE
 	str	r2, [r3]
 	str	r2, [r3]
 	str	r2, [r3]
@@ -345,7 +345,7 @@ mem_init:
 
 	/* Step 4h: Write MDMRS.                                            */
 
-	ldr     r2,  =CFG_MDMRS_VAL
+	ldr     r2,  =CONFIG_SYS_MDMRS_VAL
 	str     r2,  [r1, #MDMRS_OFFSET]
 
 
diff --git a/board/csb226/u-boot.lds b/board/csb226/u-boot.lds
index 14d264a68..7cf9fdf63 100644
--- a/board/csb226/u-boot.lds
+++ b/board/csb226/u-boot.lds
@@ -51,6 +51,6 @@ SECTIONS
 
 	. = ALIGN(4);
 	__bss_start = .;
-	.bss (NOLOAD) : { *(.bss) }
+	.bss (NOLOAD) : { *(.bss) . = ALIGN(4); }
 	_end = .;
 }
diff --git a/board/csb272/csb272.c b/board/csb272/csb272.c
index 5a585ae37..11596d2b7 100644
--- a/board/csb272/csb272.c
+++ b/board/csb272/csb272.c
@@ -51,9 +51,9 @@ uchar pll_fs6377_regs[16] = {
  */
 int pll_init(void)
 {
-	i2c_init(CFG_I2C_SPEED, CFG_I2C_SLAVE);
+	i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
 
-	return  i2c_write(CFG_I2C_PLL_ADDR, 0, 1,
+	return  i2c_write(CONFIG_SYS_I2C_PLL_ADDR, 0, 1,
 		(uchar *) pll_fs6377_regs, sizeof(pll_fs6377_regs));
 }
 
diff --git a/board/csb272/init.S b/board/csb272/init.S
index e00ebf89c..ab371f20d 100644
--- a/board/csb272/init.S
+++ b/board/csb272/init.S
@@ -82,11 +82,11 @@ ext_bus_cntlr_init:
 	mflr	r3			/* get address of ..getAddr */
 
 	/* Calculate number of cache lines for this function */
-	addi	r4, 0, (((.Lfe0 - ..getAddr) / CFG_CACHELINE_SIZE) + 2)
+	addi	r4, 0, (((.Lfe0 - ..getAddr) / CONFIG_SYS_CACHELINE_SIZE) + 2)
 	mtctr	r4
 ..ebcloop:
 	icbt	r0, r3			/* prefetch cache line for addr in r3*/
-	addi	r3, r3, CFG_CACHELINE_SIZE /* move to next cache line */
+	addi	r3, r3, CONFIG_SYS_CACHELINE_SIZE /* move to next cache line */
 	bdnz	..ebcloop		/* continue for $CTR cache lines */
 
 	/********************************************************************
diff --git a/board/csb272/u-boot.lds b/board/csb272/u-boot.lds
index 947fbd638..af871880a 100644
--- a/board/csb272/u-boot.lds
+++ b/board/csb272/u-boot.lds
@@ -68,7 +68,7 @@ SECTIONS
     cpu/ppc4xx/4xx_uart.o	(.text)
     cpu/ppc4xx/cpu_init.o	(.text)
     cpu/ppc4xx/speed.o	(.text)
-    cpu/ppc4xx/4xx_enet.o	(.text)
+    drivers/net/4xx_enet.o	(.text)
     common/dlmalloc.o	(.text)
     lib_generic/crc32.o		(.text)
 
@@ -76,7 +76,7 @@ SECTIONS
     lib_ppc/board.o	(.text)
     lib_generic/zlib.o	(.text)
 /*    . = env_offset;*/
-/*    common/environment.o(.text)*/
+/*    common/env_embedded.o(.text)*/
 
     *(.text)
     *(.fixup)
@@ -147,6 +147,7 @@ SECTIONS
    *(.dynbss)
    *(.bss)
    *(COMMON)
+   . = ALIGN(4);
   }
   _end = . ;
   PROVIDE (end = .);
diff --git a/board/csb472/init.S b/board/csb472/init.S
index aec42a14b..4b6958aef 100644
--- a/board/csb472/init.S
+++ b/board/csb472/init.S
@@ -82,11 +82,11 @@ ext_bus_cntlr_init:
 	mflr	r3			/* get address of ..getAddr */
 
 	/* Calculate number of cache lines for this function */
-	addi	r4, 0, (((.Lfe0 - ..getAddr) / CFG_CACHELINE_SIZE) + 2)
+	addi	r4, 0, (((.Lfe0 - ..getAddr) / CONFIG_SYS_CACHELINE_SIZE) + 2)
 	mtctr	r4
 ..ebcloop:
 	icbt	r0, r3			/* prefetch cache line for addr in r3*/
-	addi	r3, r3, CFG_CACHELINE_SIZE /* move to next cache line */
+	addi	r3, r3, CONFIG_SYS_CACHELINE_SIZE /* move to next cache line */
 	bdnz	..ebcloop		/* continue for $CTR cache lines */
 
 	/********************************************************************
diff --git a/board/csb472/u-boot.lds b/board/csb472/u-boot.lds
index de3643eed..37363774c 100644
--- a/board/csb472/u-boot.lds
+++ b/board/csb472/u-boot.lds
@@ -68,7 +68,7 @@ SECTIONS
     cpu/ppc4xx/4xx_uart.o	(.text)
     cpu/ppc4xx/cpu_init.o	(.text)
     cpu/ppc4xx/speed.o	(.text)
-    cpu/ppc4xx/4xx_enet.o	(.text)
+    drivers/net/4xx_enet.o	(.text)
     common/dlmalloc.o	(.text)
     lib_generic/crc32.o		(.text)
 
@@ -76,7 +76,7 @@ SECTIONS
     lib_ppc/board.o	(.text)
     lib_generic/zlib.o	(.text)
 /*    . = env_offset;*/
-/*    common/environment.o(.text)*/
+/*    common/env_embedded.o(.text)*/
 
     *(.text)
     *(.fixup)
@@ -147,6 +147,7 @@ SECTIONS
    *(.dynbss)
    *(.bss)
    *(COMMON)
+   . = ALIGN(4);
   }
   _end = . ;
   PROVIDE (end = .);
diff --git a/board/csb637/u-boot.lds b/board/csb637/u-boot.lds
index 3b7977672..d0666ac73 100644
--- a/board/csb637/u-boot.lds
+++ b/board/csb637/u-boot.lds
@@ -51,6 +51,6 @@ SECTIONS
 
 	. = ALIGN(4);
 	__bss_start = .;
-	.bss (NOLOAD) : { *(.bss) }
+	.bss (NOLOAD) : { *(.bss) . = ALIGN(4); }
 	_end = .;
 }
diff --git a/board/cu824/cu824.c b/board/cu824/cu824.c
index ecf632894..720c56fc0 100644
--- a/board/cu824/cu824.c
+++ b/board/cu824/cu824.c
@@ -28,6 +28,7 @@
 #include <mpc824x.h>
 #include <asm/processor.h>
 #include <pci.h>
+#include <netdev.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -52,7 +53,7 @@ phys_size_t initdram(int board_type)
 	long mear1;
 	long emear1;
 
-	size = get_ram_size(CFG_SDRAM_BASE, CFG_MAX_RAM_SIZE);
+	size = get_ram_size(CONFIG_SYS_SDRAM_BASE, CONFIG_SYS_MAX_RAM_SIZE);
 
 	new_bank0_end = size - 1;
 	mear1 = mpc824x_mpc107_getreg(MEAR1);
@@ -91,3 +92,8 @@ void pci_init_board(void)
 {
 	pci_mpc824x_init(&hose);
 }
+
+int board_eth_init(bd_t *bis)
+{
+	return pci_eth_init(bis);
+}
diff --git a/board/cu824/flash.c b/board/cu824/flash.c
index 7368176e5..bd0f8d326 100644
--- a/board/cu824/flash.c
+++ b/board/cu824/flash.c
@@ -25,15 +25,15 @@
 #include <mpc824x.h>
 #include <asm/processor.h>
 
-#if defined(CFG_ENV_IS_IN_FLASH)
-# ifndef  CFG_ENV_ADDR
-#  define CFG_ENV_ADDR	(CFG_FLASH_BASE + CFG_ENV_OFFSET)
+#if defined(CONFIG_ENV_IS_IN_FLASH)
+# ifndef  CONFIG_ENV_ADDR
+#  define CONFIG_ENV_ADDR	(CONFIG_SYS_FLASH_BASE + CONFIG_ENV_OFFSET)
 # endif
-# ifndef  CFG_ENV_SIZE
-#  define CFG_ENV_SIZE	CFG_ENV_SECT_SIZE
+# ifndef  CONFIG_ENV_SIZE
+#  define CONFIG_ENV_SIZE	CONFIG_ENV_SECT_SIZE
 # endif
-# ifndef  CFG_ENV_SECT_SIZE
-#  define CFG_ENV_SECT_SIZE  CFG_ENV_SIZE
+# ifndef  CONFIG_ENV_SECT_SIZE
+#  define CONFIG_ENV_SECT_SIZE  CONFIG_ENV_SIZE
 # endif
 #endif
 
@@ -43,7 +43,7 @@
 
 #define BOARD_CTRL_REG 0xFE800013
 
-flash_info_t    flash_info[CFG_MAX_FLASH_BANKS];
+flash_info_t    flash_info[CONFIG_SYS_MAX_FLASH_BANKS];
 
 static int write_data (flash_info_t *info, ulong dest, ulong *data);
 static void write_via_fpu(vu_long *addr, ulong *data);
@@ -75,8 +75,8 @@ unsigned long flash_init(void)
     *bcr |= 0x6;	/* FWP0 = FWP1 = 1 */
     DEBUGF("Write protect is:  0x%02X\n", *bcr);
 
-    for (i = 0; i < CFG_MAX_FLASH_BANKS; i++) {
-	vu_long *addr = (vu_long *)(CFG_FLASH_BASE + i * FLASH_BANK_SIZE);
+    for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) {
+	vu_long *addr = (vu_long *)(CONFIG_SYS_FLASH_BASE + i * FLASH_BANK_SIZE);
 
 	addr[0] = 0x00900090;
 
@@ -103,15 +103,15 @@ unsigned long flash_init(void)
 	addr[0] = 0xFFFFFFFF;
 
 	flash_info[i].size = FLASH_BANK_SIZE;
-	flash_info[i].sector_count = CFG_MAX_FLASH_SECT;
-	memset(flash_info[i].protect, 0, CFG_MAX_FLASH_SECT);
+	flash_info[i].sector_count = CONFIG_SYS_MAX_FLASH_SECT;
+	memset(flash_info[i].protect, 0, CONFIG_SYS_MAX_FLASH_SECT);
 	for (j = 0; j < flash_info[i].sector_count; j++) {
 		if (j <= 7) {
-			flash_info[i].start[j] = CFG_FLASH_BASE +
+			flash_info[i].start[j] = CONFIG_SYS_FLASH_BASE +
 						 i * FLASH_BANK_SIZE +
 						 j * PARAM_SECT_SIZE;
 		} else {
-			flash_info[i].start[j] = CFG_FLASH_BASE +
+			flash_info[i].start[j] = CONFIG_SYS_FLASH_BASE +
 						 i * FLASH_BANK_SIZE +
 						 (j - 7)*MAIN_SECT_SIZE;
 		}
@@ -121,30 +121,30 @@ unsigned long flash_init(void)
 
     /* Protect monitor and environment sectors
      */
-#if CFG_MONITOR_BASE >= CFG_FLASH_BASE
-#if CFG_MONITOR_BASE >= CFG_FLASH_BASE + FLASH_BANK_SIZE
+#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE
+#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE + FLASH_BANK_SIZE
     flash_protect(FLAG_PROTECT_SET,
-	      CFG_MONITOR_BASE,
-	      CFG_MONITOR_BASE + monitor_flash_len - 1,
+	      CONFIG_SYS_MONITOR_BASE,
+	      CONFIG_SYS_MONITOR_BASE + monitor_flash_len - 1,
 	      &flash_info[1]);
 #else
     flash_protect(FLAG_PROTECT_SET,
-	      CFG_MONITOR_BASE,
-	      CFG_MONITOR_BASE + monitor_flash_len - 1,
+	      CONFIG_SYS_MONITOR_BASE,
+	      CONFIG_SYS_MONITOR_BASE + monitor_flash_len - 1,
 	      &flash_info[0]);
 #endif
 #endif
 
-#if (CFG_ENV_IS_IN_FLASH == 1) && defined(CFG_ENV_ADDR)
-#if CFG_ENV_ADDR >= CFG_FLASH_BASE + FLASH_BANK_SIZE
+#if defined(CONFIG_ENV_IS_IN_FLASH) && defined(CONFIG_ENV_ADDR)
+#if CONFIG_ENV_ADDR >= CONFIG_SYS_FLASH_BASE + FLASH_BANK_SIZE
     flash_protect(FLAG_PROTECT_SET,
-	      CFG_ENV_ADDR,
-	      CFG_ENV_ADDR + CFG_ENV_SIZE - 1,
+	      CONFIG_ENV_ADDR,
+	      CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1,
 	      &flash_info[1]);
 #else
     flash_protect(FLAG_PROTECT_SET,
-	      CFG_ENV_ADDR,
-	      CFG_ENV_ADDR + CFG_ENV_SIZE - 1,
+	      CONFIG_ENV_ADDR,
+	      CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1,
 	      &flash_info[0]);
 #endif
 #endif
@@ -268,7 +268,7 @@ int	flash_erase (flash_info_t *info, int s_first, int s_last)
 			while (((addr[0] & 0x00800080) != 0x00800080) ||
 			       ((addr[1] & 0x00800080) != 0x00800080) ) {
 				if ((now=get_timer(start)) >
-					   CFG_FLASH_ERASE_TOUT) {
+					   CONFIG_SYS_FLASH_ERASE_TOUT) {
 					printf ("Timeout\n");
 					addr[0] = 0x00B000B0; /* suspend erase */
 					addr[0] = 0x00FF00FF; /* to read mode  */
@@ -452,7 +452,7 @@ static int write_data (flash_info_t *info, ulong dest, ulong *data)
 
 	while (((addr[0] & 0x00800080) != 0x00800080) ||
 	       ((addr[1] & 0x00800080) != 0x00800080) ) {
-		if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+		if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
 			addr[0] = 0x00FF00FF;	/* restore read mode */
 			return (1);
 		}
diff --git a/board/dave/B2/flash.c b/board/dave/B2/flash.c
index ad67e865b..bb892e670 100644
--- a/board/dave/B2/flash.c
+++ b/board/dave/B2/flash.c
@@ -41,19 +41,19 @@ static void flash_get_offsets (ulong base, flash_info_t * info);
 unsigned long flash_init (void)
 {
 #ifdef __DEBUG_START_FROM_SRAM__
-	return CFG_DUMMY_FLASH_SIZE;
+	return CONFIG_SYS_DUMMY_FLASH_SIZE;
 #else
 	unsigned long size_b0;
 	int i;
 
 	/* Init: no FLASHes known */
-	for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) {
+	for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
 		flash_info[i].flash_id = FLASH_UNKNOWN;
 	}
 
 	/* Static FLASH Bank configuration here - FIXME XXX */
 
-	size_b0 = flash_get_size((vu_long *)CFG_FLASH_BASE, &flash_info[0]);
+	size_b0 = flash_get_size((vu_long *)CONFIG_SYS_FLASH_BASE, &flash_info[0]);
 
 	if (flash_info[0].flash_id == FLASH_UNKNOWN) {
 		printf ("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n",
@@ -65,7 +65,7 @@ unsigned long flash_init (void)
 
 	/* Monitor protection ON by default */
 	(void)flash_protect(FLAG_PROTECT_SET,
-			    -CFG_MONITOR_LEN,
+			    -CONFIG_SYS_MONITOR_LEN,
 			    0xffffffff,
 			    &flash_info[0]);
 
diff --git a/board/dave/B2/u-boot.lds b/board/dave/B2/u-boot.lds
index 8c10d47ae..a6fc6d777 100644
--- a/board/dave/B2/u-boot.lds
+++ b/board/dave/B2/u-boot.lds
@@ -53,6 +53,6 @@ SECTIONS
 
 	. = ALIGN(4);
 	__bss_start = .;
-	.bss (NOLOAD) : { *(.bss) }
+	.bss (NOLOAD) : { *(.bss) . = ALIGN(4); }
 	_end = .;
 }
diff --git a/board/dave/PPChameleonEVB/PPChameleonEVB.c b/board/dave/PPChameleonEVB/PPChameleonEVB.c
index c9b288a41..a6aa6554b 100644
--- a/board/dave/PPChameleonEVB/PPChameleonEVB.c
+++ b/board/dave/PPChameleonEVB/PPChameleonEVB.c
@@ -38,8 +38,8 @@ int gunzip(void *, int, unsigned char *, unsigned long *);
 
 int board_early_init_f (void)
 {
-	out32(GPIO0_OR, CFG_NAND0_CE);                 /* set initial outputs     */
-	out32(GPIO0_OR, CFG_NAND1_CE);                 /* set initial outputs     */
+	out32(GPIO0_OR, CONFIG_SYS_NAND0_CE);                 /* set initial outputs     */
+	out32(GPIO0_OR, CONFIG_SYS_NAND1_CE);                 /* set initial outputs     */
 
 	/*
 	 * IRQ 0-15  405GP internally generated; active high; level sensitive
@@ -85,10 +85,10 @@ int misc_init_r (void)
 {
 	/* adjust flash start and size as well as the offset */
 	gd->bd->bi_flashstart = 0 - flash_info[0].size;
-	gd->bd->bi_flashoffset= flash_info[0].size - CFG_MONITOR_LEN;
+	gd->bd->bi_flashoffset= flash_info[0].size - CONFIG_SYS_MONITOR_LEN;
 #if 0
 	volatile unsigned short *fpga_mode =
-		(unsigned short *)((ulong)CFG_FPGA_BASE_ADDR + CFG_FPGA_CTRL);
+		(unsigned short *)((ulong)CONFIG_SYS_FPGA_BASE_ADDR + CONFIG_SYS_FPGA_CTRL);
 	volatile unsigned char *duart0_mcr =
 		(unsigned char *)((ulong)DUART0_BA + 4);
 	volatile unsigned char *duart1_mcr =
@@ -103,8 +103,8 @@ int misc_init_r (void)
 	int i;
 	unsigned long cntrl0Reg;
 
-	dst = malloc(CFG_FPGA_MAX_SIZE);
-	if (gunzip (dst, CFG_FPGA_MAX_SIZE, (uchar *)fpgadata, &len) != 0) {
+	dst = malloc(CONFIG_SYS_FPGA_MAX_SIZE);
+	if (gunzip (dst, CONFIG_SYS_FPGA_MAX_SIZE, (uchar *)fpgadata, &len) != 0) {
 		printf ("GUNZIP ERROR - must RESET board to recover\n");
 		do_reset (NULL, 0, 0, NULL);
 	}
@@ -168,7 +168,7 @@ int misc_init_r (void)
 	/*
 	 * Enable power on PS/2 interface
 	 */
-	*fpga_mode |= CFG_FPGA_CTRL_PS2_RESET;
+	*fpga_mode |= CONFIG_SYS_FPGA_CTRL_PS2_RESET;
 
 	/*
 	 * Enable interrupts in exar duart mcr[3]
@@ -203,31 +203,6 @@ int checkboard (void)
 
 /* ------------------------------------------------------------------------- */
 
-phys_size_t initdram (int board_type)
-{
-	unsigned long val;
-
-	mtdcr(memcfga, mem_mb0cf);
-	val = mfdcr(memcfgd);
-
-#if 0 /* test-only */
-	for (;;) {
-		NAND_DISABLE_CE(1);
-		udelay(100);
-		NAND_ENABLE_CE(1);
-		udelay(100);
-	}
-#endif
-#if 0
-	printf("\nmb0cf=%x\n", val); /* test-only */
-	printf("strap=%x\n", mfdcr(strap)); /* test-only */
-#endif
-
-	return (4*1024*1024 << ((val & 0x000e0000) >> 17));
-}
-
-/* ------------------------------------------------------------------------- */
-
 int testdram (void)
 {
 	/* TODO: XXX XXX XXX */
diff --git a/board/dave/PPChameleonEVB/flash.c b/board/dave/PPChameleonEVB/flash.c
index 692d275a5..e5a0d3d17 100644
--- a/board/dave/PPChameleonEVB/flash.c
+++ b/board/dave/PPChameleonEVB/flash.c
@@ -42,7 +42,7 @@ static void flash_get_offsets (ulong base, flash_info_t * info);
 unsigned long flash_init (void)
 {
 #ifdef __DEBUG_START_FROM_SRAM__
-	return CFG_DUMMY_FLASH_SIZE;
+	return CONFIG_SYS_DUMMY_FLASH_SIZE;
 #else
 	unsigned long size;
 	int i;
@@ -54,7 +54,7 @@ unsigned long flash_init (void)
 	debug("[%s, %d] flash_info = 0x%08X ...\n", __FUNCTION__, __LINE__, flash_info);
 
 	/* Init: no FLASHes known */
-	for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) {
+	for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
 		flash_info[i].flash_id = FLASH_UNKNOWN;
 	}
 
@@ -102,7 +102,7 @@ unsigned long flash_init (void)
 
 	/* Monitor protection ON by default */
 	(void)flash_protect(FLAG_PROTECT_SET,
-			    -CFG_MONITOR_LEN,
+			    -CONFIG_SYS_MONITOR_LEN,
 			    0xffffffff,
 			    &flash_info[0]);
 
diff --git a/board/dave/PPChameleonEVB/nand.c b/board/dave/PPChameleonEVB/nand.c
index 3ccbf650d..14b61a4eb 100644
--- a/board/dave/PPChameleonEVB/nand.c
+++ b/board/dave/PPChameleonEVB/nand.c
@@ -67,11 +67,11 @@ static int ppchameleonevb_device_ready(struct mtd_info *mtdinfo)
 
 	/* use the base addr to find out which chip are we dealing with */
 	switch((ulong) this->IO_ADDR_W) {
-	case CFG_NAND0_BASE:
-		rb_gpio_pin = CFG_NAND0_RDY;
+	case CONFIG_SYS_NAND0_BASE:
+		rb_gpio_pin = CONFIG_SYS_NAND0_RDY;
 		break;
-	case CFG_NAND1_BASE:
-		rb_gpio_pin = CFG_NAND1_RDY;
+	case CONFIG_SYS_NAND1_BASE:
+		rb_gpio_pin = CONFIG_SYS_NAND1_RDY;
 		break;
 	default: /* this should never happen */
 		return 0;
diff --git a/board/dave/PPChameleonEVB/u-boot.lds b/board/dave/PPChameleonEVB/u-boot.lds
index 3037a049c..d3e6df9b3 100644
--- a/board/dave/PPChameleonEVB/u-boot.lds
+++ b/board/dave/PPChameleonEVB/u-boot.lds
@@ -66,7 +66,7 @@ SECTIONS
     cpu/ppc4xx/4xx_uart.o	(.text)
     cpu/ppc4xx/cpu_init.o	(.text)
     cpu/ppc4xx/speed.o	(.text)
-    cpu/ppc4xx/4xx_enet.o	(.text)
+    drivers/net/4xx_enet.o	(.text)
     common/dlmalloc.o	(.text)
     lib_generic/crc32.o		(.text)
     lib_ppc/extable.o	(.text)
@@ -141,13 +141,14 @@ SECTIONS
    *(.dynbss)
    *(.bss)
    *(COMMON)
+   . = ALIGN(4);
   }
 
-  ppcenv_assert = ASSERT(. < 0xFFFF8000, ".bss section too big, overlaps .ppcenv section. Please update your confguration: CFG_MONITOR_BASE, CFG_MONITOR_LEN and TEXT_BASE may need to be modified.");
+  ppcenv_assert = ASSERT(. < 0xFFFF8000, ".bss section too big, overlaps .ppcenv section. Please update your confguration: CONFIG_SYS_MONITOR_BASE, CONFIG_SYS_MONITOR_LEN and TEXT_BASE may need to be modified.");
   . = 0xFFFF8000;
   .ppcenv :
   {
-    common/environment.o(.ppcenv);
+    common/env_embedded.o(.ppcenv);
   }
 
   _end = . ;
diff --git a/board/dave/common/flash.c b/board/dave/common/flash.c
index bf0f2bf28..b6af63b3b 100644
--- a/board/dave/common/flash.c
+++ b/board/dave/common/flash.c
@@ -24,7 +24,7 @@
 #include <common.h>
 #include <asm/processor.h>
 
-flash_info_t	flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips	*/
+flash_info_t	flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips	*/
 
 /*-----------------------------------------------------------------------
  * Functions
@@ -162,7 +162,7 @@ void flash_print_info  (flash_info_t *info)
 
 	printf ("  Sector Start Addresses:");
 	for (i=0; i<info->sector_count; ++i) {
-#ifdef CFG_FLASH_EMPTY_INFO
+#ifdef CONFIG_SYS_FLASH_EMPTY_INFO
 		/*
 		 * Check if whole sector is erased
 		 */
@@ -216,30 +216,30 @@ static ulong flash_get_size (vu_long *addr, flash_info_t *info)
 {
 	short i;
 	short n;
-	CFG_FLASH_WORD_SIZE value;
+	CONFIG_SYS_FLASH_WORD_SIZE value;
 	ulong base = (ulong)addr;
-	volatile CFG_FLASH_WORD_SIZE *addr2 = (CFG_FLASH_WORD_SIZE *)addr;
+	volatile CONFIG_SYS_FLASH_WORD_SIZE *addr2 = (CONFIG_SYS_FLASH_WORD_SIZE *)addr;
 
 	debug("[%s, %d] Entering ...\n", __FUNCTION__, __LINE__);
 
 	/* Write auto select command: read Manufacturer ID */
-	addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE)0x00AA00AA;
-	addr2[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE)0x00550055;
-	addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE)0x00900090;
+	addr2[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE)0x00AA00AA;
+	addr2[CONFIG_SYS_FLASH_ADDR1] = (CONFIG_SYS_FLASH_WORD_SIZE)0x00550055;
+	addr2[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE)0x00900090;
 
-	value = addr2[CFG_FLASH_READ0];
+	value = addr2[CONFIG_SYS_FLASH_READ0];
 
 	switch (value) {
-	case (CFG_FLASH_WORD_SIZE)AMD_MANUFACT:
+	case (CONFIG_SYS_FLASH_WORD_SIZE)AMD_MANUFACT:
 		info->flash_id = FLASH_MAN_AMD;
 		break;
-	case (CFG_FLASH_WORD_SIZE)FUJ_MANUFACT:
+	case (CONFIG_SYS_FLASH_WORD_SIZE)FUJ_MANUFACT:
 		info->flash_id = FLASH_MAN_FUJ;
 		break;
-	case (CFG_FLASH_WORD_SIZE)SST_MANUFACT:
+	case (CONFIG_SYS_FLASH_WORD_SIZE)SST_MANUFACT:
 		info->flash_id = FLASH_MAN_SST;
 		break;
-	case (CFG_FLASH_WORD_SIZE)STM_MANUFACT:
+	case (CONFIG_SYS_FLASH_WORD_SIZE)STM_MANUFACT:
 		info->flash_id = FLASH_MAN_STM;
 		break;
 	default:
@@ -249,92 +249,92 @@ static ulong flash_get_size (vu_long *addr, flash_info_t *info)
 		return (0);			/* no or unknown flash	*/
 	}
 
-	value = addr2[CFG_FLASH_READ1];		/* device ID		*/
+	value = addr2[CONFIG_SYS_FLASH_READ1];		/* device ID		*/
 
 	switch (value) {
-	case (CFG_FLASH_WORD_SIZE)AMD_ID_LV400T:
+	case (CONFIG_SYS_FLASH_WORD_SIZE)AMD_ID_LV400T:
 		info->flash_id += FLASH_AM400T;
 		info->sector_count = 11;
 		info->size = 0x00080000;
 		break;				/* => 0.5 MB		*/
 
-	case (CFG_FLASH_WORD_SIZE)AMD_ID_LV400B:
+	case (CONFIG_SYS_FLASH_WORD_SIZE)AMD_ID_LV400B:
 		info->flash_id += FLASH_AM400B;
 		info->sector_count = 11;
 		info->size = 0x00080000;
 		break;				/* => 0.5 MB		*/
 
-	case (CFG_FLASH_WORD_SIZE)AMD_ID_LV800T:
+	case (CONFIG_SYS_FLASH_WORD_SIZE)AMD_ID_LV800T:
 		info->flash_id += FLASH_AM800T;
 		info->sector_count = 19;
 		info->size = 0x00100000;
 		break;				/* => 1 MB		*/
 
-	case (CFG_FLASH_WORD_SIZE)AMD_ID_LV800B:
+	case (CONFIG_SYS_FLASH_WORD_SIZE)AMD_ID_LV800B:
 		info->flash_id += FLASH_AM800B;
 		info->sector_count = 19;
 		info->size = 0x00100000;
 		break;				/* => 1 MB		*/
 
-	case (CFG_FLASH_WORD_SIZE)AMD_ID_LV160T:
+	case (CONFIG_SYS_FLASH_WORD_SIZE)AMD_ID_LV160T:
 		info->flash_id += FLASH_AM160T;
 		info->sector_count = 35;
 		info->size = 0x00200000;
 		break;				/* => 2 MB		*/
 
-	case (CFG_FLASH_WORD_SIZE)AMD_ID_LV160B:
+	case (CONFIG_SYS_FLASH_WORD_SIZE)AMD_ID_LV160B:
 		info->flash_id += FLASH_AM160B;
 		info->sector_count = 35;
 		info->size = 0x00200000;
 		break;				/* => 2 MB		*/
 
-	case (CFG_FLASH_WORD_SIZE)STM_ID_29W320DT:
+	case (CONFIG_SYS_FLASH_WORD_SIZE)STM_ID_29W320DT:
 		info->flash_id += FLASH_STMW320DT;
 		info->sector_count = 67;
 		info->size = 0x00400000;  break;	/* => 4 MB	*/
 
-	case (CFG_FLASH_WORD_SIZE)AMD_ID_LV320T:
+	case (CONFIG_SYS_FLASH_WORD_SIZE)AMD_ID_LV320T:
 		info->flash_id += FLASH_AM320T;
 		info->sector_count = 71;
 		info->size = 0x00400000;  break;	/* => 4 MB	*/
 
-	case (CFG_FLASH_WORD_SIZE)AMD_ID_LV320B:
+	case (CONFIG_SYS_FLASH_WORD_SIZE)AMD_ID_LV320B:
 		info->flash_id += FLASH_AM320B;
 		info->sector_count = 71;
 		info->size = 0x00400000;  break;	/* => 4 MB	*/
 
-	case (CFG_FLASH_WORD_SIZE)AMD_ID_DL322T:
+	case (CONFIG_SYS_FLASH_WORD_SIZE)AMD_ID_DL322T:
 		info->flash_id += FLASH_AMDL322T;
 		info->sector_count = 71;
 		info->size = 0x00400000;  break;	/* => 4 MB	*/
 
-	case (CFG_FLASH_WORD_SIZE)AMD_ID_DL322B:
+	case (CONFIG_SYS_FLASH_WORD_SIZE)AMD_ID_DL322B:
 		info->flash_id += FLASH_AMDL322B;
 		info->sector_count = 71;
 		info->size = 0x00400000;  break;	/* => 4 MB	*/
 
-	case (CFG_FLASH_WORD_SIZE)AMD_ID_DL323T:
+	case (CONFIG_SYS_FLASH_WORD_SIZE)AMD_ID_DL323T:
 		info->flash_id += FLASH_AMDL323T;
 		info->sector_count = 71;
 		info->size = 0x00400000;  break;	/* => 4 MB	*/
 
-	case (CFG_FLASH_WORD_SIZE)AMD_ID_DL323B:
+	case (CONFIG_SYS_FLASH_WORD_SIZE)AMD_ID_DL323B:
 		info->flash_id += FLASH_AMDL323B;
 		info->sector_count = 71;
 		info->size = 0x00400000;  break;	/* => 4 MB	*/
 
-	case (CFG_FLASH_WORD_SIZE)AMD_ID_LV640U:
+	case (CONFIG_SYS_FLASH_WORD_SIZE)AMD_ID_LV640U:
 		info->flash_id += FLASH_AM640U;
 		info->sector_count = 128;
 		info->size = 0x00800000;  break;	/* => 8 MB	*/
 
-	case (CFG_FLASH_WORD_SIZE)SST_ID_xF800A:
+	case (CONFIG_SYS_FLASH_WORD_SIZE)SST_ID_xF800A:
 		info->flash_id += FLASH_SST800A;
 		info->sector_count = 16;
 		info->size = 0x00100000;
 		break;				/* => 1 MB		*/
 
-	case (CFG_FLASH_WORD_SIZE)SST_ID_xF160A:
+	case (CONFIG_SYS_FLASH_WORD_SIZE)SST_ID_xF160A:
 		info->flash_id += FLASH_SST160A;
 		info->sector_count = 32;
 		info->size = 0x00200000;
@@ -432,19 +432,19 @@ static ulong flash_get_size (vu_long *addr, flash_info_t *info)
 	for (i = 0; i < info->sector_count; i++) {
 		/* read sector protection at sector address, (A7 .. A0) = 0x02 */
 		/* D0 = 1 if protected */
-		addr2 = (volatile CFG_FLASH_WORD_SIZE *)(info->start[i]);
+		addr2 = (volatile CONFIG_SYS_FLASH_WORD_SIZE *)(info->start[i]);
 		if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST)
 		  info->protect[i] = 0;
 		else
-		  info->protect[i] = addr2[CFG_FLASH_READ2] & 1;
+		  info->protect[i] = addr2[CONFIG_SYS_FLASH_READ2] & 1;
 	}
 
 	/*
 	 * Prevent writes to uninitialized FLASH.
 	 */
 	if (info->flash_id != FLASH_UNKNOWN) {
-		addr2 = (CFG_FLASH_WORD_SIZE *)info->start[0];
-		*addr2 = (CFG_FLASH_WORD_SIZE)0x00F000F0;	/* reset bank */
+		addr2 = (CONFIG_SYS_FLASH_WORD_SIZE *)info->start[0];
+		*addr2 = (CONFIG_SYS_FLASH_WORD_SIZE)0x00F000F0;	/* reset bank */
 	}
 
 	return (info->size);
@@ -456,8 +456,8 @@ static ulong flash_get_size (vu_long *addr, flash_info_t *info)
 
 int	flash_erase (flash_info_t *info, int s_first, int s_last)
 {
-	volatile CFG_FLASH_WORD_SIZE *addr = (CFG_FLASH_WORD_SIZE *)(info->start[0]);
-	volatile CFG_FLASH_WORD_SIZE *addr2;
+	volatile CONFIG_SYS_FLASH_WORD_SIZE *addr = (CONFIG_SYS_FLASH_WORD_SIZE *)(info->start[0]);
+	volatile CONFIG_SYS_FLASH_WORD_SIZE *addr2;
 	int flag, prot, sect, l_sect;
 	ulong start, now, last;
 	int i;
@@ -498,25 +498,25 @@ int	flash_erase (flash_info_t *info, int s_first, int s_last)
 	/* Start erase on unprotected sectors */
 	for (sect = s_first; sect<=s_last; sect++) {
 		if (info->protect[sect] == 0) {	/* not protected */
-		    addr2 = (CFG_FLASH_WORD_SIZE *)(info->start[sect]);
+		    addr2 = (CONFIG_SYS_FLASH_WORD_SIZE *)(info->start[sect]);
 		    if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) {
-			addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE)0x00AA00AA;
-			addr[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE)0x00550055;
-			addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE)0x00800080;
-			addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE)0x00AA00AA;
-			addr[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE)0x00550055;
-			addr2[0] = (CFG_FLASH_WORD_SIZE)0x00500050;  /* block erase */
+			addr[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE)0x00AA00AA;
+			addr[CONFIG_SYS_FLASH_ADDR1] = (CONFIG_SYS_FLASH_WORD_SIZE)0x00550055;
+			addr[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE)0x00800080;
+			addr[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE)0x00AA00AA;
+			addr[CONFIG_SYS_FLASH_ADDR1] = (CONFIG_SYS_FLASH_WORD_SIZE)0x00550055;
+			addr2[0] = (CONFIG_SYS_FLASH_WORD_SIZE)0x00500050;  /* block erase */
 			for (i=0; i<50; i++)
 			  udelay(1000);  /* wait 1 ms */
 		    } else {
 			if (sect == s_first) {
-			    addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE)0x00AA00AA;
-			    addr[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE)0x00550055;
-			    addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE)0x00800080;
-			    addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE)0x00AA00AA;
-			    addr[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE)0x00550055;
+			    addr[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE)0x00AA00AA;
+			    addr[CONFIG_SYS_FLASH_ADDR1] = (CONFIG_SYS_FLASH_WORD_SIZE)0x00550055;
+			    addr[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE)0x00800080;
+			    addr[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE)0x00AA00AA;
+			    addr[CONFIG_SYS_FLASH_ADDR1] = (CONFIG_SYS_FLASH_WORD_SIZE)0x00550055;
 			}
-			addr2[0] = (CFG_FLASH_WORD_SIZE)0x00300030;  /* sector erase */
+			addr2[0] = (CONFIG_SYS_FLASH_WORD_SIZE)0x00300030;  /* sector erase */
 		    }
 		    l_sect = sect;
 		}
@@ -537,9 +537,9 @@ int	flash_erase (flash_info_t *info, int s_first, int s_last)
 
 	start = get_timer (0);
 	last  = start;
-	addr = (CFG_FLASH_WORD_SIZE *)(info->start[l_sect]);
-	while ((addr[0] & (CFG_FLASH_WORD_SIZE)0x00800080) != (CFG_FLASH_WORD_SIZE)0x00800080) {
-		if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+	addr = (CONFIG_SYS_FLASH_WORD_SIZE *)(info->start[l_sect]);
+	while ((addr[0] & (CONFIG_SYS_FLASH_WORD_SIZE)0x00800080) != (CONFIG_SYS_FLASH_WORD_SIZE)0x00800080) {
+		if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
 			printf ("Timeout\n");
 			return 1;
 		}
@@ -552,8 +552,8 @@ int	flash_erase (flash_info_t *info, int s_first, int s_last)
 
 DONE:
 	/* reset to read mode */
-	addr = (CFG_FLASH_WORD_SIZE *)info->start[0];
-	addr[0] = (CFG_FLASH_WORD_SIZE)0x00F000F0;	/* reset bank */
+	addr = (CONFIG_SYS_FLASH_WORD_SIZE *)info->start[0];
+	addr[0] = (CONFIG_SYS_FLASH_WORD_SIZE)0x00F000F0;	/* reset bank */
 
 	printf (" done\n");
 	return 0;
@@ -663,9 +663,9 @@ int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
  */
 static int write_word (flash_info_t *info, ulong dest, ulong data)
 {
-	volatile CFG_FLASH_WORD_SIZE *addr2 = (CFG_FLASH_WORD_SIZE *)(info->start[0]);
-	volatile CFG_FLASH_WORD_SIZE *dest2 = (CFG_FLASH_WORD_SIZE *)dest;
-	volatile CFG_FLASH_WORD_SIZE *data2 = (CFG_FLASH_WORD_SIZE *)&data;
+	volatile CONFIG_SYS_FLASH_WORD_SIZE *addr2 = (CONFIG_SYS_FLASH_WORD_SIZE *)(info->start[0]);
+	volatile CONFIG_SYS_FLASH_WORD_SIZE *dest2 = (CONFIG_SYS_FLASH_WORD_SIZE *)dest;
+	volatile CONFIG_SYS_FLASH_WORD_SIZE *data2 = (CONFIG_SYS_FLASH_WORD_SIZE *)&data;
 	ulong start;
 	int flag;
 	int i;
@@ -677,11 +677,11 @@ static int write_word (flash_info_t *info, ulong dest, ulong data)
 	/* Disable interrupts which might cause a timeout here */
 	flag = disable_interrupts();
 
-	for (i=0; i<4/sizeof(CFG_FLASH_WORD_SIZE); i++)
+	for (i=0; i<4/sizeof(CONFIG_SYS_FLASH_WORD_SIZE); i++)
 	  {
-	    addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE)0x00AA00AA;
-	    addr2[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE)0x00550055;
-	    addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE)0x00A000A0;
+	    addr2[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE)0x00AA00AA;
+	    addr2[CONFIG_SYS_FLASH_ADDR1] = (CONFIG_SYS_FLASH_WORD_SIZE)0x00550055;
+	    addr2[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE)0x00A000A0;
 
 	    dest2[i] = data2[i];
 
@@ -691,9 +691,9 @@ static int write_word (flash_info_t *info, ulong dest, ulong data)
 
 	    /* data polling for D7 */
 	    start = get_timer (0);
-	    while ((dest2[i] & (CFG_FLASH_WORD_SIZE)0x00800080) !=
-		   (data2[i] & (CFG_FLASH_WORD_SIZE)0x00800080)) {
-	      if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+	    while ((dest2[i] & (CONFIG_SYS_FLASH_WORD_SIZE)0x00800080) !=
+		   (data2[i] & (CONFIG_SYS_FLASH_WORD_SIZE)0x00800080)) {
+	      if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
 		return (1);
 	      }
 	    }
diff --git a/board/dave/common/fpga.c b/board/dave/common/fpga.c
index 5b5b5e9d2..30bc19626 100644
--- a/board/dave/common/fpga.c
+++ b/board/dave/common/fpga.c
@@ -36,12 +36,12 @@
 
 #define MAX_ONES               226
 
-#ifdef CFG_FPGA_PRG
-# define FPGA_PRG              CFG_FPGA_PRG /* FPGA program pin (ppc output)*/
-# define FPGA_CLK              CFG_FPGA_CLK /* FPGA clk pin (ppc output)    */
-# define FPGA_DATA             CFG_FPGA_DATA /* FPGA data pin (ppc output)  */
-# define FPGA_DONE             CFG_FPGA_DONE /* FPGA done pin (ppc input)   */
-# define FPGA_INIT             CFG_FPGA_INIT /* FPGA init pin (ppc input)   */
+#ifdef CONFIG_SYS_FPGA_PRG
+# define FPGA_PRG              CONFIG_SYS_FPGA_PRG /* FPGA program pin (ppc output)*/
+# define FPGA_CLK              CONFIG_SYS_FPGA_CLK /* FPGA clk pin (ppc output)    */
+# define FPGA_DATA             CONFIG_SYS_FPGA_DATA /* FPGA data pin (ppc output)  */
+# define FPGA_DONE             CONFIG_SYS_FPGA_DONE /* FPGA done pin (ppc input)   */
+# define FPGA_INIT             CONFIG_SYS_FPGA_INIT /* FPGA init pin (ppc input)   */
 #else
 # define FPGA_PRG              0x04000000  /* FPGA program pin (ppc output) */
 # define FPGA_CLK              0x02000000  /* FPGA clk pin (ppc output)     */
@@ -74,7 +74,7 @@ static int fpga_boot (unsigned char *fpgadata, int size)
 	int i, index, len;
 	int count;
 
-#ifdef CFG_FPGA_SPARTAN2
+#ifdef CONFIG_SYS_FPGA_SPARTAN2
 	int j;
 #else
 	unsigned char b;
@@ -89,7 +89,7 @@ static int fpga_boot (unsigned char *fpgadata, int size)
 		index += len + 3;
 	}
 
-#ifdef CFG_FPGA_SPARTAN2
+#ifdef CONFIG_SYS_FPGA_SPARTAN2
 	/* search for preamble 0xFFFFFFFF */
 	while (1) {
 		if ((fpgadata[index] == 0xff) && (fpgadata[index + 1] == 0xff)
@@ -167,7 +167,7 @@ static int fpga_boot (unsigned char *fpgadata, int size)
 	DBG ("write configuration data into fpga\n");
 	/* write configuration-data into fpga... */
 
-#ifdef CFG_FPGA_SPARTAN2
+#ifdef CONFIG_SYS_FPGA_SPARTAN2
 	/*
 	 * Load uncompressed image into fpga
 	 */
@@ -181,7 +181,7 @@ static int fpga_boot (unsigned char *fpgadata, int size)
 			fpgadata[i] <<= 1;
 		}
 	}
-#else	/* ! CFG_FPGA_SPARTAN2 */
+#else	/* ! CONFIG_SYS_FPGA_SPARTAN2 */
 	/* send 0xff 0x20 */
 	FPGA_WRITE_1;
 	FPGA_WRITE_1;
@@ -228,7 +228,7 @@ static int fpga_boot (unsigned char *fpgadata, int size)
 			FPGA_WRITE_1;
 		}
 	}
-#endif	/* CFG_FPGA_SPARTAN2 */
+#endif	/* CONFIG_SYS_FPGA_SPARTAN2 */
 
 	DBG ("%s, ",
 	     ((in32 (GPIO0_IR) & FPGA_DONE) == 0) ? "NOT DONE" : "DONE");
diff --git a/board/dave/common/pci.c b/board/dave/common/pci.c
index f8f180c6c..ec0d76125 100644
--- a/board/dave/common/pci.c
+++ b/board/dave/common/pci.c
@@ -119,24 +119,24 @@ static void pci_dasa_sim_config_pci9054(struct pci_controller *hose, pci_dev_t d
   /*
    * Configure PLX PCI9054
    */
-  pci_read_config_word(CFG_PCI9054_DEV_FN, PCI_COMMAND, &status);
+  pci_read_config_word(CONFIG_SYS_PCI9054_DEV_FN, PCI_COMMAND, &status);
   status |= PCI_COMMAND_MASTER | PCI_COMMAND_IO | PCI_COMMAND_MEMORY;
-  pci_write_config_word(CFG_PCI9054_DEV_FN, PCI_COMMAND, status);
+  pci_write_config_word(CONFIG_SYS_PCI9054_DEV_FN, PCI_COMMAND, status);
 
   /* Check the latency timer for values >= 0x60.
    */
-  pci_read_config_byte(CFG_PCI9054_DEV_FN, PCI_LATENCY_TIMER, &timer);
+  pci_read_config_byte(CONFIG_SYS_PCI9054_DEV_FN, PCI_LATENCY_TIMER, &timer);
   if (timer < 0x60)
     {
-      pci_write_config_byte(CFG_PCI9054_DEV_FN, PCI_LATENCY_TIMER, 0x60);
+      pci_write_config_byte(CONFIG_SYS_PCI9054_DEV_FN, PCI_LATENCY_TIMER, 0x60);
     }
 
   /* Set I/O base register.
    */
-  pci_write_config_dword(CFG_PCI9054_DEV_FN, PCI_BASE_ADDRESS_0, CFG_PCI9054_IOBASE);
-  pci_read_config_dword(CFG_PCI9054_DEV_FN, PCI_BASE_ADDRESS_0, &iobase);
+  pci_write_config_dword(CONFIG_SYS_PCI9054_DEV_FN, PCI_BASE_ADDRESS_0, CONFIG_SYS_PCI9054_IOBASE);
+  pci_read_config_dword(CONFIG_SYS_PCI9054_DEV_FN, PCI_BASE_ADDRESS_0, &iobase);
 
-  pci9054_iobase = pci_mem_to_phys(CFG_PCI9054_DEV_FN, iobase & PCI_BASE_ADDRESS_MEM_MASK);
+  pci9054_iobase = pci_mem_to_phys(CONFIG_SYS_PCI9054_DEV_FN, iobase & PCI_BASE_ADDRESS_MEM_MASK);
 
   if (pci9054_iobase == 0xffffffff)
     {
@@ -149,13 +149,13 @@ static void pci_dasa_sim_config_pci9054(struct pci_controller *hose, pci_dev_t d
 static struct pci_config_table pci9054_config_table[] = {
 #ifndef CONFIG_PCI_PNP
   { PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
-    PCI_BUS(CFG_ETH_DEV_FN), PCI_DEV(CFG_ETH_DEV_FN), PCI_FUNC(CFG_ETH_DEV_FN),
-    pci_cfgfunc_config_device, { CFG_ETH_IOBASE,
-				 CFG_ETH_IOBASE,
+    PCI_BUS(CONFIG_SYS_ETH_DEV_FN), PCI_DEV(CONFIG_SYS_ETH_DEV_FN), PCI_FUNC(CONFIG_SYS_ETH_DEV_FN),
+    pci_cfgfunc_config_device, { CONFIG_SYS_ETH_IOBASE,
+				 CONFIG_SYS_ETH_IOBASE,
 				 PCI_COMMAND_IO | PCI_COMMAND_MASTER }},
 #ifdef CONFIG_DASA_SIM
   { PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
-    PCI_BUS(CFG_PCI9054_DEV_FN), PCI_DEV(CFG_PCI9054_DEV_FN), PCI_FUNC(CFG_PCI9054_DEV_FN),
+    PCI_BUS(CONFIG_SYS_PCI9054_DEV_FN), PCI_DEV(CONFIG_SYS_PCI9054_DEV_FN), PCI_FUNC(CONFIG_SYS_PCI9054_DEV_FN),
     pci_dasa_sim_config_pci9054 },
 #endif
 #endif
diff --git a/board/davinci/common/misc.c b/board/davinci/common/misc.c
index 71a3b87ac..be709bf81 100644
--- a/board/davinci/common/misc.c
+++ b/board/davinci/common/misc.c
@@ -39,7 +39,7 @@ int dram_init(void)
 
 static int dv_get_pllm_output(uint32_t pllm)
 {
-	return (pllm + 1) * (CFG_HZ_CLOCK / 1000000);
+	return (pllm + 1) * (CONFIG_SYS_HZ_CLOCK / 1000000);
 }
 
 void dv_display_clk_infos(void)
@@ -54,9 +54,9 @@ void dv_display_clk_infos(void)
  */
 int dvevm_read_mac_address(uint8_t *buf)
 {
-#ifdef CFG_I2C_EEPROM_ADDR
+#ifdef CONFIG_SYS_I2C_EEPROM_ADDR
 	/* Read MAC address. */
-	if (i2c_read(CFG_I2C_EEPROM_ADDR, 0x7F00, CFG_I2C_EEPROM_ADDR_LEN,
+	if (i2c_read(CONFIG_SYS_I2C_EEPROM_ADDR, 0x7F00, CONFIG_SYS_I2C_EEPROM_ADDR_LEN,
 		     (uint8_t *) &buf[0], 6))
 		goto i2cerr;
 
@@ -67,9 +67,9 @@ int dvevm_read_mac_address(uint8_t *buf)
 	return 1; /* Found */
 
 i2cerr:
-	printf("Read from EEPROM @ 0x%02x failed\n", CFG_I2C_EEPROM_ADDR);
+	printf("Read from EEPROM @ 0x%02x failed\n", CONFIG_SYS_I2C_EEPROM_ADDR);
 err:
-#endif /* CFG_I2C_EEPROM_ADDR */
+#endif /* CONFIG_SYS_I2C_EEPROM_ADDR */
 
 	return 0;
 }
diff --git a/board/davinci/common/psc.c b/board/davinci/common/psc.c
index 00dc07c3f..d538d51f2 100644
--- a/board/davinci/common/psc.c
+++ b/board/davinci/common/psc.c
@@ -81,7 +81,7 @@ void lpsc_on(unsigned int id)
 }
 
 /* If DSPLINK is used, we don't want U-Boot to power on the DSP. */
-#if !defined(CFG_USE_DSPLINK)
+#if !defined(CONFIG_SYS_USE_DSPLINK)
 void dsp_on(void)
 {
 	int i;
@@ -114,4 +114,4 @@ void dsp_on(void)
 
 	REG(PSC_GBLCTL) &= ~0x1f;
 }
-#endif /* CFG_USE_DSPLINK */
+#endif /* CONFIG_SYS_USE_DSPLINK */
diff --git a/board/davinci/dvevm/dvevm.c b/board/davinci/dvevm/dvevm.c
index 151f8a900..abf60b35b 100644
--- a/board/davinci/dvevm/dvevm.c
+++ b/board/davinci/dvevm/dvevm.c
@@ -53,10 +53,10 @@ int board_init(void)
 	lpsc_on(DAVINCI_LPSC_TIMER1);
 	lpsc_on(DAVINCI_LPSC_GPIO);
 
-#if !defined(CFG_USE_DSPLINK)
+#if !defined(CONFIG_SYS_USE_DSPLINK)
 	/* Powerup the DSP */
 	dsp_on();
-#endif /* CFG_USE_DSPLINK */
+#endif /* CONFIG_SYS_USE_DSPLINK */
 
 	/* Bringup UART0 out of reset */
 	REG(UART0_PWREMU_MGMT) = 0x0000e003;
diff --git a/board/davinci/dvevm/u-boot.lds b/board/davinci/dvevm/u-boot.lds
index a4fcd1a9b..d86eb3621 100644
--- a/board/davinci/dvevm/u-boot.lds
+++ b/board/davinci/dvevm/u-boot.lds
@@ -47,6 +47,6 @@ SECTIONS
 
 	. = ALIGN(4);
 	__bss_start = .;
-	.bss (NOLOAD) : { *(.bss) }
+	.bss (NOLOAD) : { *(.bss) . = ALIGN(4); }
 	_end = .;
 }
diff --git a/board/davinci/schmoogie/schmoogie.c b/board/davinci/schmoogie/schmoogie.c
index 99fd32629..3504a2ec1 100644
--- a/board/davinci/schmoogie/schmoogie.c
+++ b/board/davinci/schmoogie/schmoogie.c
@@ -53,10 +53,10 @@ int board_init(void)
 	lpsc_on(DAVINCI_LPSC_TIMER1);
 	lpsc_on(DAVINCI_LPSC_GPIO);
 
-#if !defined(CFG_USE_DSPLINK)
+#if !defined(CONFIG_SYS_USE_DSPLINK)
 	/* Powerup the DSP */
 	dsp_on();
-#endif /* CFG_USE_DSPLINK */
+#endif /* CONFIG_SYS_USE_DSPLINK */
 
 	/* Bringup UART0 out of reset */
 	REG(UART0_PWREMU_MGMT) = 0x0000e003;
@@ -125,13 +125,13 @@ int misc_init_r(void)
 	dv_display_clk_infos();
 
 	/* Set serial number from UID chip */
-	if (i2c_read(CFG_UID_ADDR, 0, 1, buf, 8)) {
-		printf("\nUID @ 0x%02x read FAILED!!!\n", CFG_UID_ADDR);
+	if (i2c_read(CONFIG_SYS_UID_ADDR, 0, 1, buf, 8)) {
+		printf("\nUID @ 0x%02x read FAILED!!!\n", CONFIG_SYS_UID_ADDR);
 		forceenv("serial#", "FAILED");
 	} else {
 		if (buf[0] != 0x70) {
 			/* Device Family Code */
-			printf("\nUID @ 0x%02x read FAILED!!!\n", CFG_UID_ADDR);
+			printf("\nUID @ 0x%02x read FAILED!!!\n", CONFIG_SYS_UID_ADDR);
 			forceenv("serial#", "FAILED");
 		}
 	}
@@ -141,7 +141,7 @@ int misc_init_r(void)
 		tmp[0] = crc_tbl[tmp[0] ^ buf[i]];
 
 	if (tmp[0] != 0) {
-		printf("\nUID @ 0x%02x - BAD CRC!!!\n", CFG_UID_ADDR);
+		printf("\nUID @ 0x%02x - BAD CRC!!!\n", CONFIG_SYS_UID_ADDR);
 		forceenv("serial#", "FAILED");
 	} else {
 		/* CRC OK, set "serial" env variable */
diff --git a/board/davinci/schmoogie/u-boot.lds b/board/davinci/schmoogie/u-boot.lds
index a4fcd1a9b..d86eb3621 100644
--- a/board/davinci/schmoogie/u-boot.lds
+++ b/board/davinci/schmoogie/u-boot.lds
@@ -47,6 +47,6 @@ SECTIONS
 
 	. = ALIGN(4);
 	__bss_start = .;
-	.bss (NOLOAD) : { *(.bss) }
+	.bss (NOLOAD) : { *(.bss) . = ALIGN(4); }
 	_end = .;
 }
diff --git a/board/davinci/sffsdr/sffsdr.c b/board/davinci/sffsdr/sffsdr.c
index f47ba0f3b..9296d7b63 100644
--- a/board/davinci/sffsdr/sffsdr.c
+++ b/board/davinci/sffsdr/sffsdr.c
@@ -63,10 +63,10 @@ int board_init(void)
 	lpsc_on(DAVINCI_LPSC_TIMER1);
 	lpsc_on(DAVINCI_LPSC_GPIO);
 
-#if !defined(CFG_USE_DSPLINK)
+#if !defined(CONFIG_SYS_USE_DSPLINK)
 	/* Powerup the DSP */
 	dsp_on();
-#endif /* CFG_USE_DSPLINK */
+#endif /* CONFIG_SYS_USE_DSPLINK */
 
 	/* Bringup UART0 out of reset */
 	REG(UART0_PWREMU_MGMT) = 0x0000e003;
@@ -99,35 +99,35 @@ static int sffsdr_read_mac_address(uint8_t *buf)
 	u_int32_t value, mac[2], address;
 
 	/* Read Integrity data structure checkword. */
-	if (i2c_read(CFG_I2C_EEPROM_ADDR, INTEGRITY_CHECKWORD_OFFSET,
-		     CFG_I2C_EEPROM_ADDR_LEN, (uint8_t *) &value, 4))
+	if (i2c_read(CONFIG_SYS_I2C_EEPROM_ADDR, INTEGRITY_CHECKWORD_OFFSET,
+		     CONFIG_SYS_I2C_EEPROM_ADDR_LEN, (uint8_t *) &value, 4))
 		goto err;
 	if (value != INTEGRITY_CHECKWORD_VALUE)
 		return 0;
 
 	/* Read SYSCFG structure offset. */
-	if (i2c_read(CFG_I2C_EEPROM_ADDR, INTEGRITY_SYSCFG_OFFSET,
-		     CFG_I2C_EEPROM_ADDR_LEN, (uint8_t *) &value, 4))
+	if (i2c_read(CONFIG_SYS_I2C_EEPROM_ADDR, INTEGRITY_SYSCFG_OFFSET,
+		     CONFIG_SYS_I2C_EEPROM_ADDR_LEN, (uint8_t *) &value, 4))
 		goto err;
 	address = 0x800 + (int) value; /* Address of SYSCFG structure. */
 
 	/* Read NET CONFIG structure offset. */
-	if (i2c_read(CFG_I2C_EEPROM_ADDR, address,
-		     CFG_I2C_EEPROM_ADDR_LEN, (uint8_t *) &value, 4))
+	if (i2c_read(CONFIG_SYS_I2C_EEPROM_ADDR, address,
+		     CONFIG_SYS_I2C_EEPROM_ADDR_LEN, (uint8_t *) &value, 4))
 		goto err;
 	address = 0x800 + (int) value; /* Address of NET CONFIG structure. */
 	address += 12; /* Address of NET INTERFACE CONFIG structure. */
 
 	/* Read NET INTERFACE CONFIG 2 structure offset. */
-	if (i2c_read(CFG_I2C_EEPROM_ADDR, address,
-		     CFG_I2C_EEPROM_ADDR_LEN, (uint8_t *) &value, 4))
+	if (i2c_read(CONFIG_SYS_I2C_EEPROM_ADDR, address,
+		     CONFIG_SYS_I2C_EEPROM_ADDR_LEN, (uint8_t *) &value, 4))
 		goto err;
 	address = 0x800 + 16 + (int) value;	/* Address of NET INTERFACE
 						 * CONFIG 2 structure. */
 
 	/* Read MAC address. */
-	if (i2c_read(CFG_I2C_EEPROM_ADDR, address,
-		     CFG_I2C_EEPROM_ADDR_LEN, (uint8_t *) &mac[0], 8))
+	if (i2c_read(CONFIG_SYS_I2C_EEPROM_ADDR, address,
+		     CONFIG_SYS_I2C_EEPROM_ADDR_LEN, (uint8_t *) &mac[0], 8))
 		goto err;
 
 	buf[0] = mac[0] >> 24;
@@ -140,7 +140,7 @@ static int sffsdr_read_mac_address(uint8_t *buf)
 	return 1; /* Found */
 
 err:
-	printf("Read from EEPROM @ 0x%02x failed\n", CFG_I2C_EEPROM_ADDR);
+	printf("Read from EEPROM @ 0x%02x failed\n", CONFIG_SYS_I2C_EEPROM_ADDR);
 	return 0;
 }
 
@@ -156,10 +156,10 @@ int misc_init_r(void)
 	dv_display_clk_infos();
 
 	/* Configure I2C switch (PCA9543) to enable channel 0. */
-	i2cbuf = CFG_I2C_PCA9543_ENABLE_CH0;
-	if (i2c_write(CFG_I2C_PCA9543_ADDR, 0,
-		      CFG_I2C_PCA9543_ADDR_LEN, &i2cbuf, 1)) {
-		printf("Write to MUX @ 0x%02x failed\n", CFG_I2C_PCA9543_ADDR);
+	i2cbuf = CONFIG_SYS_I2C_PCA9543_ENABLE_CH0;
+	if (i2c_write(CONFIG_SYS_I2C_PCA9543_ADDR, 0,
+		      CONFIG_SYS_I2C_PCA9543_ADDR_LEN, &i2cbuf, 1)) {
+		printf("Write to MUX @ 0x%02x failed\n", CONFIG_SYS_I2C_PCA9543_ADDR);
 		return 1;
 	}
 
@@ -170,9 +170,5 @@ int misc_init_r(void)
 	if (!eth_hw_init())
 		printf("Ethernet init failed\n");
 
-	/* On this platform, U-Boot is copied in RAM by the UBL,
-	 * so we are always in the relocated state. */
-	gd->flags |= GD_FLG_RELOC;
-
 	return(0);
 }
diff --git a/board/davinci/sffsdr/u-boot.lds b/board/davinci/sffsdr/u-boot.lds
index a4fcd1a9b..d86eb3621 100644
--- a/board/davinci/sffsdr/u-boot.lds
+++ b/board/davinci/sffsdr/u-boot.lds
@@ -47,6 +47,6 @@ SECTIONS
 
 	. = ALIGN(4);
 	__bss_start = .;
-	.bss (NOLOAD) : { *(.bss) }
+	.bss (NOLOAD) : { *(.bss) . = ALIGN(4); }
 	_end = .;
 }
diff --git a/board/davinci/sonata/sonata.c b/board/davinci/sonata/sonata.c
index a6fe82593..6de9356c7 100644
--- a/board/davinci/sonata/sonata.c
+++ b/board/davinci/sonata/sonata.c
@@ -52,10 +52,10 @@ int board_init(void)
 	lpsc_on(DAVINCI_LPSC_TIMER1);
 	lpsc_on(DAVINCI_LPSC_GPIO);
 
-#if !defined(CFG_USE_DSPLINK)
+#if !defined(CONFIG_SYS_USE_DSPLINK)
 	/* Powerup the DSP */
 	dsp_on();
-#endif /* CFG_USE_DSPLINK */
+#endif /* CONFIG_SYS_USE_DSPLINK */
 
 	/* Bringup UART0 out of reset */
 	REG(UART0_PWREMU_MGMT) = 0x0000e003;
diff --git a/board/davinci/sonata/u-boot.lds b/board/davinci/sonata/u-boot.lds
index a4fcd1a9b..d86eb3621 100644
--- a/board/davinci/sonata/u-boot.lds
+++ b/board/davinci/sonata/u-boot.lds
@@ -47,6 +47,6 @@ SECTIONS
 
 	. = ALIGN(4);
 	__bss_start = .;
-	.bss (NOLOAD) : { *(.bss) }
+	.bss (NOLOAD) : { *(.bss) . = ALIGN(4); }
 	_end = .;
 }
diff --git a/board/dbau1x00/dbau1x00.c b/board/dbau1x00/dbau1x00.c
index 629dc317e..42756f5b8 100644
--- a/board/dbau1x00/dbau1x00.c
+++ b/board/dbau1x00/dbau1x00.c
@@ -106,19 +106,19 @@ int checkboard (void)
 	/* We dont need theese unless we run whole pcmcia package */
 	write_one_tlb(20,                 /* index */
 		      0x01ffe000,         /* Pagemask, 16 MB pages */
-		      CFG_PCMCIA_IO_BASE, /* Hi */
+		      CONFIG_SYS_PCMCIA_IO_BASE, /* Hi */
 		      0x3C000017,         /* Lo0 */
 		      0x3C200017);        /* Lo1 */
 
 	write_one_tlb(21,                   /* index */
 		      0x01ffe000,           /* Pagemask, 16 MB pages */
-		      CFG_PCMCIA_ATTR_BASE, /* Hi */
+		      CONFIG_SYS_PCMCIA_ATTR_BASE, /* Hi */
 		      0x3D000017,           /* Lo0 */
 		      0x3D200017);          /* Lo1 */
 #endif	/* 0 */
 	write_one_tlb(22,                   /* index */
 		      0x01ffe000,           /* Pagemask, 16 MB pages */
-		      CFG_PCMCIA_MEM_ADDR,  /* Hi */
+		      CONFIG_SYS_PCMCIA_MEM_ADDR,  /* Hi */
 		      0x3E000017,           /* Lo0 */
 		      0x3E200017);          /* Lo1 */
 #endif	/* CONFIG_IDE_PCMCIA */
diff --git a/board/dbau1x00/flash.c b/board/dbau1x00/flash.c
index 3cf29e844..a2fed1d71 100644
--- a/board/dbau1x00/flash.c
+++ b/board/dbau1x00/flash.c
@@ -23,7 +23,7 @@
 
 #include <common.h>
 
-flash_info_t flash_info[CFG_MAX_FLASH_BANKS];	/* info for FLASH chips */
+flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];	/* info for FLASH chips */
 
 /*-----------------------------------------------------------------------
  * flash_init()
diff --git a/board/dbau1x00/lowlevel_init.S b/board/dbau1x00/lowlevel_init.S
index 13e6bfcf3..842fb76e5 100644
--- a/board/dbau1x00/lowlevel_init.S
+++ b/board/dbau1x00/lowlevel_init.S
@@ -8,8 +8,8 @@
 #define AU1500_SYS_ADDR		0xB1900000
 #define sys_endian		0x0038
 #define CP0_Config0		$16
-#define CPU_SCALE		((CFG_MHZ) / 12) /* CPU clock is a multiple of 12 MHz */
-#define MEM_1MS			((CFG_MHZ) * 1000)
+#define CPU_SCALE		((CONFIG_SYS_MHZ) / 12) /* CPU clock is a multiple of 12 MHz */
+#define MEM_1MS			((CONFIG_SYS_MHZ) * 1000)
 
 	.text
 	.set noreorder
diff --git a/board/dbau1x00/u-boot.lds b/board/dbau1x00/u-boot.lds
index 1e1c5590d..da20de1ad 100644
--- a/board/dbau1x00/u-boot.lds
+++ b/board/dbau1x00/u-boot.lds
@@ -65,6 +65,6 @@ SECTIONS
 
 	. = ALIGN(4);
 	.sbss (NOLOAD)  : { *(.sbss) }
-	.bss (NOLOAD)  : { *(.bss) }
+	.bss (NOLOAD)  : { *(.bss) . = ALIGN(4); }
 	uboot_end = .;
 }
diff --git a/board/delta/delta.c b/board/delta/delta.c
index 6e227748b..878416f73 100644
--- a/board/delta/delta.c
+++ b/board/delta/delta.c
@@ -304,8 +304,8 @@ static void init_DA9030()
 	GPCR0 = (1<<17);	/* drive GPIO17 low */
 	GPSR0 = (1<<17);	/* drive GPIO17 high */
 
-#if CFG_DA9030_EXTON_DELAY
-	udelay((unsigned long) CFG_DA9030_EXTON_DELAY);	/* wait for DA9030 */
+#if CONFIG_SYS_DA9030_EXTON_DELAY
+	udelay((unsigned long) CONFIG_SYS_DA9030_EXTON_DELAY);	/* wait for DA9030 */
 #endif
 	GPCR0 = (1<<17);	/* drive GPIO17 low */
 
diff --git a/board/delta/lowlevel_init.S b/board/delta/lowlevel_init.S
index f059db505..eef631854 100644
--- a/board/delta/lowlevel_init.S
+++ b/board/delta/lowlevel_init.S
@@ -24,7 +24,7 @@
 #include <version.h>
 #include <asm/arch/pxa-regs.h>
 
-DRAM_SIZE:  .long   CFG_DRAM_SIZE
+DRAM_SIZE:  .long   CONFIG_SYS_DRAM_SIZE
 
 .macro wait time
 	ldr		r2, =OSCR
@@ -108,10 +108,10 @@ mem_init:
 	orr		r1, r1, #MDCNFG_DMCEN
 	str		r1, [r0]
 
-#ifndef CFG_SKIP_DRAM_SCRUB
+#ifndef CONFIG_SYS_SKIP_DRAM_SCRUB
 	/* scrub/init SDRAM if enabled/present */
-	ldr	r8, =CFG_DRAM_BASE	/* base address of SDRAM (CFG_DRAM_BASE) */
-	ldr	r9, =CFG_DRAM_SIZE	/* size of memory to scrub (CFG_DRAM_SIZE) */
+	ldr	r8, =CONFIG_SYS_DRAM_BASE	/* base address of SDRAM (CONFIG_SYS_DRAM_BASE) */
+	ldr	r9, =CONFIG_SYS_DRAM_SIZE	/* size of memory to scrub (CONFIG_SYS_DRAM_SIZE) */
 	mov	r0, #0			/* scrub with 0x0000:0000 */
 	mov	r1, #0
 	mov	r2, #0
@@ -125,7 +125,7 @@ mem_init:
 	stmia	r8!, {r0-r7}
 	beq	15f
 	b	10b
-#endif /* CFG_SKIP_DRAM_SCRUB */
+#endif /* CONFIG_SYS_SKIP_DRAM_SCRUB */
 
 15:
 	/* Mask all interrupts */
diff --git a/board/delta/nand.c b/board/delta/nand.c
index 4ce78a1e1..aff7c54fc 100644
--- a/board/delta/nand.c
+++ b/board/delta/nand.c
@@ -28,26 +28,24 @@
 #include <nand.h>
 #include <asm/arch/pxa-regs.h>
 
-#ifdef CFG_DFC_DEBUG1
+#ifdef CONFIG_SYS_DFC_DEBUG1
 # define DFC_DEBUG1(fmt, args...) printf(fmt, ##args)
 #else
 # define DFC_DEBUG1(fmt, args...)
 #endif
 
-#ifdef CFG_DFC_DEBUG2
+#ifdef CONFIG_SYS_DFC_DEBUG2
 # define DFC_DEBUG2(fmt, args...) printf(fmt, ##args)
 #else
 # define DFC_DEBUG2(fmt, args...)
 #endif
 
-#ifdef CFG_DFC_DEBUG3
+#ifdef CONFIG_SYS_DFC_DEBUG3
 # define DFC_DEBUG3(fmt, args...) printf(fmt, ##args)
 #else
 # define DFC_DEBUG3(fmt, args...)
 #endif
 
-#define MIN(x, y)		((x < y) ? x : y)
-
 /* These really don't belong here, as they are specific to the NAND Model */
 static uint8_t scan_ff_pattern[] = { 0xff, 0xff };
 
@@ -58,14 +56,12 @@ static struct nand_bbt_descr delta_bbt_descr = {
 	.pattern = scan_ff_pattern
 };
 
-static struct nand_oobinfo delta_oob = {
-	.useecc = MTD_NANDECC_AUTOPL_USR, /* MTD_NANDECC_PLACEONLY, */
+static struct nand_ecclayout delta_oob = {
 	.eccbytes = 6,
 	.eccpos = {2, 3, 4, 5, 6, 7},
 	.oobfree = { {8, 2}, {12, 4} }
 };
 
-
 /*
  * not required for Monahans DFC
  */
@@ -208,7 +204,7 @@ static void wait_us(unsigned long us)
 static void dfc_clear_nddb(void)
 {
 	NDCR &= ~NDCR_ND_RUN;
-	wait_us(CFG_NAND_OTHER_TO);
+	wait_us(CONFIG_SYS_NAND_OTHER_TO);
 }
 
 /* wait_event with timeout */
@@ -219,9 +215,9 @@ static unsigned long dfc_wait_event(unsigned long event)
 	if(!event)
 		return 0xff000000;
 	else if(event & (NDSR_CS0_CMDD | NDSR_CS0_BBD))
-		timeout = CFG_NAND_PROG_ERASE_TO * OSCR_CLK_FREQ;
+		timeout = CONFIG_SYS_NAND_PROG_ERASE_TO * OSCR_CLK_FREQ;
 	else
-		timeout = CFG_NAND_OTHER_TO * OSCR_CLK_FREQ;
+		timeout = CONFIG_SYS_NAND_OTHER_TO * OSCR_CLK_FREQ;
 
 	while(1) {
 		ndsr = NDSR;
@@ -244,7 +240,7 @@ static void dfc_new_cmd(void)
 	int retry = 0;
 	unsigned long status;
 
-	while(retry++ <= CFG_NAND_SENDCMD_RETRY) {
+	while(retry++ <= CONFIG_SYS_NAND_SENDCMD_RETRY) {
 		/* Clear NDSR */
 		NDSR = 0xFFF;
 
@@ -435,8 +431,8 @@ int board_nand_init(struct nand_chip *nand)
 	/* turn on the NAND Controller Clock (104 MHz @ D0) */
 	CKENA |= (CKENA_4_NAND | CKENA_9_SMC);
 
-#undef CFG_TIMING_TIGHT
-#ifndef CFG_TIMING_TIGHT
+#undef CONFIG_SYS_TIMING_TIGHT
+#ifndef CONFIG_SYS_TIMING_TIGHT
 	tCH = MIN(((unsigned long) (NAND_TIMING_tCH * DFC_CLK_PER_US) + 1),
 		  DFC_MAX_tCH);
 	tCS = MIN(((unsigned long) (NAND_TIMING_tCS * DFC_CLK_PER_US) + 1),
@@ -475,7 +471,7 @@ int board_nand_init(struct nand_chip *nand)
 		   DFC_MAX_tWHR);
 	tAR = MIN(((unsigned long) (NAND_TIMING_tAR * DFC_CLK_PER_US) - 2),
 		  DFC_MAX_tAR);
-#endif /* CFG_TIMING_TIGHT */
+#endif /* CONFIG_SYS_TIMING_TIGHT */
 
 
 	DFC_DEBUG2("tCH=%u, tCS=%u, tWH=%u, tWP=%u, tRH=%u, tRP=%u, tR=%u, tWHR=%u, tAR=%u.\n", tCH, tCS, tWH, tWP, tRH, tRP, tR, tWHR, tAR);
@@ -541,6 +537,7 @@ int board_nand_init(struct nand_chip *nand)
 	nand->cmd_ctrl = dfc_hwcontrol;
 /*	nand->dev_ready = dfc_device_ready; */
 	nand->ecc.mode = NAND_ECC_SOFT;
+	nand->ecc.layout = &delta_oob;
 	nand->options = NAND_BUSWIDTH_16;
 	nand->waitfunc = dfc_wait;
 	nand->read_byte = dfc_read_byte;
@@ -549,7 +546,6 @@ int board_nand_init(struct nand_chip *nand)
 	nand->write_buf = dfc_write_buf;
 
 	nand->cmdfunc = dfc_cmdfunc;
-/*	nand->autooob = &delta_oob; */
 	nand->badblock_pattern = &delta_bbt_descr;
 	return 0;
 }
diff --git a/board/delta/u-boot.lds b/board/delta/u-boot.lds
index 14d264a68..7cf9fdf63 100644
--- a/board/delta/u-boot.lds
+++ b/board/delta/u-boot.lds
@@ -51,6 +51,6 @@ SECTIONS
 
 	. = ALIGN(4);
 	__bss_start = .;
-	.bss (NOLOAD) : { *(.bss) }
+	.bss (NOLOAD) : { *(.bss) . = ALIGN(4); }
 	_end = .;
 }
diff --git a/board/dnp1110/flash.c b/board/dnp1110/flash.c
index 60874ba9b..c81abc50f 100644
--- a/board/dnp1110/flash.c
+++ b/board/dnp1110/flash.c
@@ -28,7 +28,7 @@
 #include <linux/byteorder/swab.h>
 
 
-flash_info_t	flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips	*/
+flash_info_t	flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips	*/
 
 /* Board support for 1 or 2 flash devices */
 #undef FLASH_PORT_WIDTH32
@@ -65,7 +65,7 @@ unsigned long flash_init (void)
    int i;
     ulong size = 0;
 
-    for (i = 0; i < CFG_MAX_FLASH_BANKS; i++)
+    for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++)
     {
 	switch (i)
 	{
@@ -83,13 +83,13 @@ unsigned long flash_init (void)
     /* Protect monitor and environment sectors
      */
     flash_protect(FLAG_PROTECT_SET,
-		  CFG_FLASH_BASE,
-		  CFG_FLASH_BASE + monitor_flash_len  - 1,
+		  CONFIG_SYS_FLASH_BASE,
+		  CONFIG_SYS_FLASH_BASE + monitor_flash_len  - 1,
 		  &flash_info[0]);
 
     flash_protect(FLAG_PROTECT_SET,
-		  CFG_ENV_ADDR,
-		  CFG_ENV_ADDR + CFG_ENV_SIZE - 1,
+		  CONFIG_ENV_ADDR,
+		  CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1,
 		  &flash_info[0]);
 
     return size;
@@ -194,10 +194,10 @@ static ulong flash_get_size (FPW *addr, flash_info_t *info)
 		break;
 	}
 
-	if (info->sector_count > CFG_MAX_FLASH_SECT) {
+	if (info->sector_count > CONFIG_SYS_MAX_FLASH_SECT) {
 		printf ("** ERROR: sector count %d > max (%d) **\n",
-			info->sector_count, CFG_MAX_FLASH_SECT);
-		info->sector_count = CFG_MAX_FLASH_SECT;
+			info->sector_count, CONFIG_SYS_MAX_FLASH_SECT);
+		info->sector_count = CONFIG_SYS_MAX_FLASH_SECT;
     }
 
 	addr[0] = (FPW)0x00FF00FF;      /* restore read mode */
@@ -267,7 +267,7 @@ int	flash_erase (flash_info_t *info, int s_first, int s_last)
 			*addr = (FPW)0x00D000D0;	/* erase confirm */
 
 			while (((status = *addr) & (FPW)0x00800080) != (FPW)0x00800080) {
-		if (get_timer_masked() > CFG_FLASH_ERASE_TOUT) {
+		if (get_timer_masked() > CONFIG_SYS_FLASH_ERASE_TOUT) {
 					printf ("Timeout\n");
 					*addr = (FPW)0x00B000B0; /* suspend erase	  */
 					*addr = (FPW)0x00FF00FF; /* reset to read mode */
@@ -402,7 +402,7 @@ static int write_data (flash_info_t *info, ulong dest, FPW data)
 
 	/* wait while polling the status register */
 	while (((status = *addr) & (FPW)0x00800080) != (FPW)0x00800080) {
-		if (get_timer_masked() > CFG_FLASH_WRITE_TOUT) {
+		if (get_timer_masked() > CONFIG_SYS_FLASH_WRITE_TOUT) {
 			*addr = (FPW)0x00FF00FF;	/* restore read mode */
 			return (1);
 		}
diff --git a/board/dnp1110/u-boot.lds b/board/dnp1110/u-boot.lds
index 6bd06270a..fce2533ce 100644
--- a/board/dnp1110/u-boot.lds
+++ b/board/dnp1110/u-boot.lds
@@ -51,6 +51,6 @@ SECTIONS
 
 	. = ALIGN(4);
 	__bss_start = .;
-	.bss (NOLOAD) : { *(.bss) }
+	.bss (NOLOAD) : { *(.bss) . = ALIGN(4); }
 	_end = .;
 }
diff --git a/board/eXalion/eXalion.c b/board/eXalion/eXalion.c
index 385b498d0..c17498f06 100644
--- a/board/eXalion/eXalion.c
+++ b/board/eXalion/eXalion.c
@@ -30,6 +30,8 @@
 #include <asm/io.h>
 #include <pci.h>
 #include <ide.h>
+#include <netdev.h>
+#include <timestamp.h>
 #include "piix_pci.h"
 #include "eXalion.h"
 
@@ -39,7 +41,7 @@ int checkboard (void)
 	char buf[32];
 
 	printf ("Board: eXalion MPC824x - CHRP (MAP B)\n");
-	printf ("Built: %s at %s\n", __DATE__, __TIME__);
+	printf ("Built: %s at %s\n", U_BOOT_DATE, U_BOOT_TIME);
 	printf ("Local Bus:  %s MHz\n", strmhz (buf, busfreq));
 
 	return 0;
@@ -55,12 +57,12 @@ int checkflash (void)
 phys_size_t initdram (int board_type)
 {
 	int i, cnt;
-	volatile uchar *base = CFG_SDRAM_BASE;
+	volatile uchar *base = CONFIG_SYS_SDRAM_BASE;
 	volatile ulong *addr;
 	ulong save[32];
 	ulong val, ret = 0;
 
-	for (i = 0, cnt = (CFG_MAX_RAM_SIZE / sizeof (long)) >> 1; cnt > 0;
+	for (i = 0, cnt = (CONFIG_SYS_MAX_RAM_SIZE / sizeof (long)) >> 1; cnt > 0;
 	     cnt >>= 1) {
 		addr = (volatile ulong *) base + cnt;
 		save[i++] = *addr;
@@ -76,7 +78,7 @@ phys_size_t initdram (int board_type)
 		goto Done;
 	}
 
-	for (cnt = 1; cnt <= CFG_MAX_RAM_SIZE / sizeof (long); cnt <<= 1) {
+	for (cnt = 1; cnt <= CONFIG_SYS_MAX_RAM_SIZE / sizeof (long); cnt <<= 1) {
 		addr = (volatile ulong *) base + cnt;
 		val = *addr;
 		*addr = save[--i];
@@ -99,7 +101,7 @@ phys_size_t initdram (int board_type)
 		}
 	}
 
-	ret = CFG_MAX_RAM_SIZE;
+	ret = CONFIG_SYS_MAX_RAM_SIZE;
       Done:
 	return ret;
 }
@@ -290,3 +292,8 @@ void pci_init_board (void)
 {
 	pci_mpc824x_init (&hose);
 }
+
+int board_eth_init(bd_t *bis)
+{
+	return pci_eth_init(bis);
+}
diff --git a/board/earthlcd/favr-32-ezkit/favr-32-ezkit.c b/board/earthlcd/favr-32-ezkit/favr-32-ezkit.c
index d53ca4c13..8af680fe9 100644
--- a/board/earthlcd/favr-32-ezkit/favr-32-ezkit.c
+++ b/board/earthlcd/favr-32-ezkit/favr-32-ezkit.c
@@ -18,6 +18,7 @@
  * Place, Suite 330, Boston, MA 02111-1307 USA
  */
 #include <common.h>
+#include <netdev.h>
 
 #include <asm/io.h>
 #include <asm/sdram.h>
@@ -88,8 +89,6 @@ int board_early_init_r(void)
 }
 
 #if defined(CONFIG_MACB) && defined(CONFIG_CMD_NET)
-extern int macb_eth_initialize(int id, void *regs, unsigned int phy_addr);
-
 int board_eth_init(bd_t *bi)
 {
 	return macb_eth_initialize(0, (void *)MACB0_BASE, bi->bi_phy_id[0]);
diff --git a/board/earthlcd/favr-32-ezkit/flash.c b/board/earthlcd/favr-32-ezkit/flash.c
index 2aa9415e8..5f73ff04d 100644
--- a/board/earthlcd/favr-32-ezkit/flash.c
+++ b/board/earthlcd/favr-32-ezkit/flash.c
@@ -53,17 +53,17 @@ unsigned long flash_init(void)
 	unsigned long addr;
 	unsigned int i;
 
-	flash_info[0].size = CFG_FLASH_SIZE;
+	flash_info[0].size = CONFIG_SYS_FLASH_SIZE;
 	flash_info[0].sector_count = 135;
 
-	flash_identify(uncached((void *)CFG_FLASH_BASE), &flash_info[0]);
+	flash_identify(uncached((void *)CONFIG_SYS_FLASH_BASE), &flash_info[0]);
 
 	for (i = 0, addr = 0; i < 8; i++, addr += 0x2000)
 		flash_info[0].start[i] = addr;
 	for (; i < flash_info[0].sector_count; i++, addr += 0x10000)
 		flash_info[0].start[i] = addr;
 
-	return CFG_FLASH_SIZE;
+	return CONFIG_SYS_FLASH_SIZE;
 }
 
 void flash_print_info(flash_info_t *info)
diff --git a/board/eltec/bab7xx/asm_init.S b/board/eltec/bab7xx/asm_init.S
index 2a9b33e12..a85fb8b89 100644
--- a/board/eltec/bab7xx/asm_init.S
+++ b/board/eltec/bab7xx/asm_init.S
@@ -125,7 +125,7 @@ board_asm_init:
     lis     r2, 0xfee0
     ori     r2, r2, 0xcfc
 
-#ifdef CFG_ADDRESS_MAP_A
+#ifdef CONFIG_SYS_ADDRESS_MAP_A
 /*
  * Switch to address map A if necessary.
  */
@@ -835,17 +835,17 @@ toggleError2:
 /*
  * Get base addr of ISA I/O space
  */
-    lis     r6, CFG_ISA_IO@h
-    ori     r6, r6, CFG_ISA_IO@l
+    lis     r6, CONFIG_SYS_ISA_IO@h
+    ori     r6, r6, CONFIG_SYS_ISA_IO@l
 
 /*
  * Set offset to base address for config registers.
  */
-#if defined(CFG_NS87308_BADDR_0x)
+#if defined(CONFIG_SYS_NS87308_BADDR_0x)
     addi    r4, r0, 0x0279
-#elif defined(CFG_NS87308_BADDR_10)
+#elif defined(CONFIG_SYS_NS87308_BADDR_10)
     addi    r4, r0, 0x015C
-#elif defined(CFG_NS87308_BADDR_11)
+#elif defined(CONFIG_SYS_NS87308_BADDR_11)
     addi    r4, r0, 0x002E
 #endif
     add     r6, r6, r4          /* add offset to base */
@@ -867,7 +867,7 @@ toggleError2:
     addi    r5, r0, SIO_LUNENABLE
     bl      .sio_bw
 
-    lis     r8, CFG_ISA_IO@h
+    lis     r8, CONFIG_SYS_ISA_IO@h
     ori     r8, r8, 0x0460
     li      r9, 0x03
     stb     r9, 0(r8)               /* select PMC2 register */
@@ -898,7 +898,7 @@ toggleError2:
 /*
  * Init COM1 for polled output
  */
-    lis     r8, CFG_ISA_IO@h
+    lis     r8, CONFIG_SYS_ISA_IO@h
     ori     r8, r8, 0x03f8
     li      r9, 0x00
     stb     r9, 1(r8)           /* int disabled */
@@ -972,8 +972,8 @@ waitEmpty1:
 /*
  * Get base addr of ISA I/O space
  */
-    lis     r3, CFG_ISA_IO@h
-    ori     r3, r3, CFG_ISA_IO@l
+    lis     r3, CONFIG_SYS_ISA_IO@h
+    ori     r3, r3, CONFIG_SYS_ISA_IO@l
 
     addi    r3, r3, 0x015C      /* adjust to superI/O 87308 base */
     or      r6, r3, r3          /* make a copy */
@@ -1076,7 +1076,7 @@ waitEmpty1:
  */
 .globl Printf
 Printf:
-    lis     r10, CFG_ISA_IO@h   /* COM1 port */
+    lis     r10, CONFIG_SYS_ISA_IO@h   /* COM1 port */
     ori     r10, r10, 0x03f8
 
 WaitChr:
@@ -1107,7 +1107,7 @@ OutHex4:
 OutHex:
     li      r9, 28              /* shift reg for 8 digits */
 OHstart:
-    lis     r10, CFG_ISA_IO@h   /* COM1 port */
+    lis     r10, CONFIG_SYS_ISA_IO@h   /* COM1 port */
     ori     r10, r10, 0x03f8
 OutDig:
     lbz     r0, 5(r10)          /* read link status */
@@ -1149,7 +1149,7 @@ OutDec:
     mullw   r10, r0, r6
     subf    r7, r10, r3
 
-    lis     r10, CFG_ISA_IO@h   /* COM1 port */
+    lis     r10, CONFIG_SYS_ISA_IO@h   /* COM1 port */
     ori     r10, r10, 0x03f8
 
     or.     r7, r7, r7
@@ -1198,7 +1198,7 @@ OutDec6:
  */
 .globl    OutChr
 OutChr:
-    lis     r10, CFG_ISA_IO@h   /* COM1 port */
+    lis     r10, CONFIG_SYS_ISA_IO@h   /* COM1 port */
     ori     r10, r10, 0x03f8
 
 OutChr1:
@@ -1216,7 +1216,7 @@ OutChr1:
 spdRead:
     mfspr   r26, 8              /* save link register */
 
-    lis     r30, CFG_ISA_IO@h
+    lis     r30, CONFIG_SYS_ISA_IO@h
     ori     r30, r30, 0x220     /* GPIO Port 1 */
     li      r7, 0x00
     li      r8, 0x100
diff --git a/board/eltec/bab7xx/bab7xx.c b/board/eltec/bab7xx/bab7xx.c
index af5235237..1f78f8d16 100644
--- a/board/eltec/bab7xx/bab7xx.c
+++ b/board/eltec/bab7xx/bab7xx.c
@@ -30,6 +30,7 @@
 #include <74xx_7xx.h>
 #include <ns87308.h>
 #include <video_fb.h>
+#include <netdev.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -43,7 +44,7 @@ ulong bab7xx_get_bus_freq (void)
 	 * The GPIO Port 1 on BAB7xx reflects the bus speed.
 	 */
 	volatile struct GPIO *gpio =
-		(struct GPIO *) (CFG_ISA_IO + CFG_NS87308_GPIO_BASE);
+		(struct GPIO *) (CONFIG_SYS_ISA_IO + CONFIG_SYS_NS87308_GPIO_BASE);
 
 	unsigned char data = gpio->dta1;
 
@@ -86,7 +87,7 @@ int checkcpu (void)
 
 int checkboard (void)
 {
-#ifdef CFG_ADDRESS_MAP_A
+#ifdef CONFIG_SYS_ADDRESS_MAP_A
 	puts ("Board: ELTEC BAB7xx PReP\n");
 #else
 	puts ("Board: ELTEC BAB7xx CHRP\n");
@@ -125,16 +126,16 @@ long int dram_size (int board_type)
 
 	register unsigned long i, msar1, mear1, memSize;
 
-#if defined(CFG_MEMTEST)
+#if defined(CONFIG_SYS_MEMTEST)
 	register unsigned long reg;
 
 	printf ("Testing DRAM\n");
 
 	/* write each mem addr with it's address */
-	for (reg = CFG_MEMTEST_START; reg < CFG_MEMTEST_END; reg += 4)
+	for (reg = CONFIG_SYS_MEMTEST_START; reg < CONFIG_SYS_MEMTEST_END; reg += 4)
 		*reg = reg;
 
-	for (reg = CFG_MEMTEST_START; reg < CFG_MEMTEST_END; reg += 4) {
+	for (reg = CONFIG_SYS_MEMTEST_START; reg < CONFIG_SYS_MEMTEST_END; reg += 4) {
 		if (*reg != reg)
 			return -1;
 	}
@@ -244,3 +245,8 @@ void video_get_info_str (int line_number, char *info)
 #endif
 
 /*---------------------------------------------------------------------------*/
+
+int board_eth_init(bd_t *bis)
+{
+	return pci_eth_init(bis);
+}
diff --git a/board/eltec/bab7xx/flash.c b/board/eltec/bab7xx/flash.c
index 442dd0051..21ae09892 100644
--- a/board/eltec/bab7xx/flash.c
+++ b/board/eltec/bab7xx/flash.c
@@ -34,7 +34,7 @@
 #include <asm/processor.h>
 #include <asm/pci_io.h>
 
-flash_info_t    flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
+flash_info_t    flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */
 
 ulong flash_get_size (vu_long *addr, flash_info_t *info);
 static int write_word (flash_info_t *info, ulong dest, ulong data);
@@ -55,7 +55,7 @@ unsigned long flash_init (void)
     int i;
 
     /* Init: no FLASHes known */
-    for (i=0; i<CFG_MAX_FLASH_BANKS; ++i)
+    for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i)
     {
 	flash_info[i].flash_id = FLASH_UNKNOWN;
     }
@@ -96,8 +96,8 @@ unsigned long flash_init (void)
     if (size2 == 4*1024*1024)
     {
 	(void)flash_protect(FLAG_PROTECT_SET,
-		CFG_FLASH_BASE,
-		CFG_FLASH_BASE+monitor_flash_len-1,
+		CONFIG_SYS_FLASH_BASE,
+		CONFIG_SYS_FLASH_BASE+monitor_flash_len-1,
 		&flash_info[1]);
     }
 
@@ -370,7 +370,7 @@ int flash_erase (flash_info_t *info, int s_first, int s_last)
     last  = start;
     addr = (FLASH_WORD_SIZE *)(info->start[l_sect]);
     while ((addr[0] & (FLASH_WORD_SIZE)0x00800080) != (FLASH_WORD_SIZE)0x00800080) {
-	if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+	if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
 	    printf ("Timeout\n");
 	    return 1;
 	}
@@ -500,7 +500,7 @@ static int write_word (flash_info_t *info, ulong dest, ulong data)
 	    start = get_timer (0);
 	    while ((dest2[i] & (FLASH_WORD_SIZE)0x00800080) !=
 		   (data2[i] & (FLASH_WORD_SIZE)0x00800080)) {
-	      if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+	      if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
 		return (1);
 	      }
 	    }
diff --git a/board/eltec/bab7xx/l2cache.c b/board/eltec/bab7xx/l2cache.c
index 1e7537745..787704f40 100644
--- a/board/eltec/bab7xx/l2cache.c
+++ b/board/eltec/bab7xx/l2cache.c
@@ -23,7 +23,7 @@
 
 #include <common.h>
 
-#if defined(CFG_L2_BAB7xx)
+#if defined(CONFIG_SYS_L2_BAB7xx)
 
 #include <pci.h>
 #include <mpc106.h>
@@ -77,7 +77,7 @@ int l2_cache_enable (int l2control)
 	pci_write_config_dword (devbusfn, PCI_PICR2, reg32);
 
 	/* cache size */
-	if (*(volatile unsigned char *) (CFG_ISA_IO + 0x220) & 0x04)
+	if (*(volatile unsigned char *) (CONFIG_SYS_ISA_IO + 0x220) & 0x04)
 	{
 	    /* cache size is 512 KB */
 	    picr2CacheSize = PICR2_L2_SIZE_512K;
@@ -156,4 +156,4 @@ int l2_cache_enable (int l2control)
 
 /*----------------------------------------------------------------------------*/
 
-#endif /* (CFG_L2_BAB7xx) */
+#endif /* (CONFIG_SYS_L2_BAB7xx) */
diff --git a/board/eltec/bab7xx/misc.c b/board/eltec/bab7xx/misc.c
index 6a2480741..bc6eb4055 100644
--- a/board/eltec/bab7xx/misc.c
+++ b/board/eltec/bab7xx/misc.c
@@ -31,7 +31,7 @@
 #include "srom.h"
 
 /* imports  */
-extern char console_buffer[CFG_CBSIZE];
+extern char console_buffer[CONFIG_SYS_CBSIZE];
 extern int l2_cache_enable (int l2control);
 extern void *nvram_read (void *dest, const short src, size_t count);
 extern void nvram_write (short dest, const void *src, size_t count);
@@ -134,7 +134,7 @@ int misc_init_r (void)
 		SECOND_DEVICE, FIRST_BLOCK);
 
     /* read out current nvram shadow image */
-    nvram_read (buf, CFG_NV_SROM_COPY_ADDR, CFG_SROM_SIZE);
+    nvram_read (buf, CONFIG_SYS_NV_SROM_COPY_ADDR, CONFIG_SYS_SROM_SIZE);
 
     if (strcmp (eerev.magic, "ELTEC") != 0)
     {
@@ -162,8 +162,8 @@ int misc_init_r (void)
 	copyNv   = 1;  /* copy to nvram */
     }
 
-    if ((copyNv == 0) &&   (el_srom_checksum((u_char*)&eerev, CFG_SROM_SIZE) !=
-		el_srom_checksum((u_char*)buf, CFG_SROM_SIZE)))
+    if ((copyNv == 0) &&   (el_srom_checksum((u_char*)&eerev, CONFIG_SYS_SROM_SIZE) !=
+		el_srom_checksum((u_char*)buf, CONFIG_SYS_SROM_SIZE)))
     {
 	printf ("Invalid revision info copy in nvram !\n");
 	printf ("Press key:\n  <c> to copy current revision info to nvram.\n");
@@ -304,13 +304,13 @@ int misc_init_r (void)
 	    printf("OK\n\n");
 
 	/* write new values as shadow image to nvram */
-	nvram_write (CFG_NV_SROM_COPY_ADDR, (void *)&eerev, CFG_SROM_SIZE);
+	nvram_write (CONFIG_SYS_NV_SROM_COPY_ADDR, (void *)&eerev, CONFIG_SYS_SROM_SIZE);
 
     } /*if (initSrom) */
 
     /* copy current values as shadow image to nvram */
     if (initSrom == 0 && copyNv == 1)
-	nvram_write (CFG_NV_SROM_COPY_ADDR, (void *)&eerev, CFG_SROM_SIZE);
+	nvram_write (CONFIG_SYS_NV_SROM_COPY_ADDR, (void *)&eerev, CONFIG_SYS_SROM_SIZE);
 
     /* update environment */
     sprintf (buf, "%02x:%02x:%02x:%02x:%02x:%02x",
@@ -333,7 +333,7 @@ int misc_init_r (void)
    /*
     * L2 cache configuration
     */
-#if defined(CFG_L2_BAB7xx)
+#if defined(CONFIG_SYS_L2_BAB7xx)
     ptr = getenv("l2cache");
     if (*ptr == '0')
     {
@@ -377,7 +377,7 @@ int misc_init_r (void)
     {
 	if (pci_find_device(PCI_VENDOR_ID_NCR, PCI_DEVICE_ID_NCR_53C860, 0) > 0)
 	{
-	    /* BAB740 with SCSI=IRQ 11; SCC=IRQ 9; no IDE; NCR860 at 80 Mhz */
+	    /* BAB740 with SCSI=IRQ 11; SCC=IRQ 9; no IDE; NCR860 at 80 MHz */
 	    scsi_dev_id = PCI_DEVICE_ID_NCR_53C860;
 	    scsi_max_scsi_id = 7;
 	    scsi_sym53c8xx_ccf = 0x15;
diff --git a/board/eltec/bab7xx/pci.c b/board/eltec/bab7xx/pci.c
index edbd3ddf7..46e5a8bb1 100644
--- a/board/eltec/bab7xx/pci.c
+++ b/board/eltec/bab7xx/pci.c
@@ -43,41 +43,41 @@ void pci_init_board(void)
     hose->last_busno = 0xff;
 
     pci_set_region(hose->regions + 0,
-	CFG_PCI_MEMORY_BUS,
-	CFG_PCI_MEMORY_PHYS,
+	CONFIG_SYS_PCI_MEMORY_BUS,
+	CONFIG_SYS_PCI_MEMORY_PHYS,
     /*
     * Attention: pci_hose_phys_to_bus() failes in address compare,
-    * so we need (CFG_PCI_MEMORY_SIZE-1)
+    * so we need (CONFIG_SYS_PCI_MEMORY_SIZE-1)
     */
-	CFG_PCI_MEMORY_SIZE-1,
+	CONFIG_SYS_PCI_MEMORY_SIZE-1,
 	PCI_REGION_MEM | PCI_REGION_MEMORY);
 
     /* PCI memory space */
     pci_set_region(hose->regions + 1,
-	CFG_PCI_MEM_BUS,
-	CFG_PCI_MEM_PHYS,
-	CFG_PCI_MEM_SIZE,
+	CONFIG_SYS_PCI_MEM_BUS,
+	CONFIG_SYS_PCI_MEM_PHYS,
+	CONFIG_SYS_PCI_MEM_SIZE,
 	PCI_REGION_MEM);
 
     /* ISA/PCI memory space */
     pci_set_region(hose->regions + 2,
-	CFG_ISA_MEM_BUS,
-	CFG_ISA_MEM_PHYS,
-	CFG_ISA_MEM_SIZE,
+	CONFIG_SYS_ISA_MEM_BUS,
+	CONFIG_SYS_ISA_MEM_PHYS,
+	CONFIG_SYS_ISA_MEM_SIZE,
 	PCI_REGION_MEM);
 
     /* PCI I/O space */
     pci_set_region(hose->regions + 3,
-	CFG_PCI_IO_BUS,
-	CFG_PCI_IO_PHYS,
-	CFG_PCI_IO_SIZE,
+	CONFIG_SYS_PCI_IO_BUS,
+	CONFIG_SYS_PCI_IO_PHYS,
+	CONFIG_SYS_PCI_IO_SIZE,
 	PCI_REGION_IO);
 
     /* ISA/PCI I/O space */
     pci_set_region(hose->regions + 4,
-	CFG_ISA_IO_BUS,
-	CFG_ISA_IO_PHYS,
-	CFG_ISA_IO_SIZE,
+	CONFIG_SYS_ISA_IO_BUS,
+	CONFIG_SYS_ISA_IO_PHYS,
+	CONFIG_SYS_ISA_IO_SIZE,
 	PCI_REGION_IO);
 
     hose->region_count = 5;
diff --git a/board/eltec/bab7xx/srom.h b/board/eltec/bab7xx/srom.h
index c18ab9164..504b742a6 100644
--- a/board/eltec/bab7xx/srom.h
+++ b/board/eltec/bab7xx/srom.h
@@ -40,8 +40,8 @@
 #define SROM_SHORT(pX)          (*(u8 *)(pX) | *((u8 *)(pX)+1) << 8)
 
 /* bab7xx ELTEC srom */
-#define I2C_BUS_DAT             (CFG_ISA_IO + 0x220)
-#define I2C_BUS_DIR             (CFG_ISA_IO + 0x221)
+#define I2C_BUS_DAT             (CONFIG_SYS_ISA_IO + 0x220)
+#define I2C_BUS_DIR             (CONFIG_SYS_ISA_IO + 0x221)
 
 /* srom at mpc107 */
 #define MPC107_I2CADDR          (mpc107_eumb_addr + 0x3000)     /* address      */
diff --git a/board/eltec/bab7xx/u-boot.lds b/board/eltec/bab7xx/u-boot.lds
index 1a95755ab..ff2d8b7fe 100644
--- a/board/eltec/bab7xx/u-boot.lds
+++ b/board/eltec/bab7xx/u-boot.lds
@@ -60,7 +60,7 @@ SECTIONS
 
 /* store the environment in a seperate sector in the boot flash */
 /*    . = env_offset; */
-/*    common/environment.o(.text) */
+/*    common/env_embedded.o(.text) */
 
     *(.text)
     *(.fixup)
@@ -131,6 +131,7 @@ SECTIONS
    *(.dynbss)
    *(.bss)
    *(COMMON)
+   . = ALIGN(4);
   }
   _end = . ;
   PROVIDE (end = .);
diff --git a/board/eltec/elppc/asm_init.S b/board/eltec/elppc/asm_init.S
index 1b8d399ed..8cbe9d88e 100644
--- a/board/eltec/elppc/asm_init.S
+++ b/board/eltec/elppc/asm_init.S
@@ -272,15 +272,15 @@ memStartWait:
  * set LEDs first time
  */
     li      r3, 0x1
-    lis     r30, CFG_USR_LED_BASE@h
+    lis     r30, CONFIG_SYS_USR_LED_BASE@h
     stb     r3, 2(r30)
     sync
 
 /*
  * init COM1 for polled output
  */
-    lis     r8, CFG_NS16550_COM1@h  /* COM1 base address*/
-    ori     r8, r8, CFG_NS16550_COM1@l
+    lis     r8, CONFIG_SYS_NS16550_COM1@h  /* COM1 base address*/
+    ori     r8, r8, CONFIG_SYS_NS16550_COM1@l
     li      r9, 0x00
     stb     r9, 1(r8)           /* int disabled */
     eieio
@@ -290,10 +290,10 @@ memStartWait:
     li      r9, 0x80
     stb     r9, 3(r8)           /* link ctrl */
     eieio
-    li      r9, (CFG_NS16550_CLK / 16 / CONFIG_BAUDRATE)
+    li      r9, (CONFIG_SYS_NS16550_CLK / 16 / CONFIG_BAUDRATE)
     stb     r9, 0(r8)           /* baud rate (LSB)*/
     eieio
-    li      r9, ((CFG_NS16550_CLK / 16 / CONFIG_BAUDRATE) >> 8)
+    li      r9, ((CONFIG_SYS_NS16550_CLK / 16 / CONFIG_BAUDRATE) >> 8)
     stb     r9, 1(r8)           /* baud rate (MSB) */
     eieio
     li      r9, 0x07
@@ -589,7 +589,7 @@ memStartWait_1:
  * set LEDs end
  */
     li      r3, 0xf
-    lis     r30, CFG_USR_LED_BASE@h
+    lis     r30, CONFIG_SYS_USR_LED_BASE@h
     stb     r3, 2(r30)
     sync
 
@@ -602,8 +602,8 @@ memStartWait_1:
  */
 
 Printf:
-    lis     r10, CFG_NS16550_COM1@h /* COM1 base address*/
-    ori     r10, r10, CFG_NS16550_COM1@l
+    lis     r10, CONFIG_SYS_NS16550_COM1@h /* COM1 base address*/
+    ori     r10, r10, CONFIG_SYS_NS16550_COM1@l
 WaitChr:
     lbz     r0, 5(r10)          /* read link status */
     eieio
@@ -622,8 +622,8 @@ WaitChr:
  * print a char to COM1 in polling mode (r10=COM1 port, r3=char)
  */
 OutChr:
-    lis     r10, CFG_NS16550_COM1@h /* COM1 base address*/
-    ori     r10, r10, CFG_NS16550_COM1@l
+    lis     r10, CONFIG_SYS_NS16550_COM1@h /* COM1 base address*/
+    ori     r10, r10, CONFIG_SYS_NS16550_COM1@l
 OutChr1:
     lbz     r0, 5(r10)          /* read link status */
     eieio
@@ -645,8 +645,8 @@ OutHex4:
 OutHex:
     li      r9, 28              /* shift reg for 8 digits */
 OHstart:
-    lis     r10, CFG_NS16550_COM1@h /* COM1 base address*/
-    ori     r10, r10, CFG_NS16550_COM1@l
+    lis     r10, CONFIG_SYS_NS16550_COM1@h /* COM1 base address*/
+    ori     r10, r10, CONFIG_SYS_NS16550_COM1@l
 OutDig:
     lbz     r0, 0(r29)          /* slow down dummy read */
     lbz     r0, 5(r10)          /* read link status */
@@ -685,8 +685,8 @@ OutDec:
     divwu   r0, r3, r6          /* r0 = r3 / 10, r7 = r3 mod 10 */
     mullw   r10, r0, r6
     subf    r7, r10, r3
-    lis     r10, CFG_NS16550_COM1@h /* COM1 base address*/
-    ori     r10, r10, CFG_NS16550_COM1@l
+    lis     r10, CONFIG_SYS_NS16550_COM1@h /* COM1 base address*/
+    ori     r10, r10, CONFIG_SYS_NS16550_COM1@l
     or.     r7, r7, r7
     bne     noblank1
     li      r3, 0x20
diff --git a/board/eltec/elppc/elppc.c b/board/eltec/elppc/elppc.c
index 1b70605e2..e73c712cb 100644
--- a/board/eltec/elppc/elppc.c
+++ b/board/eltec/elppc/elppc.c
@@ -25,6 +25,7 @@
 #include <command.h>
 #include <mpc106.h>
 #include <video_fb.h>
+#include <netdev.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -67,16 +68,16 @@ long int dram_size (int board_type)
 
 	register unsigned long i, msar1, mear1, memSize;
 
-#if defined(CFG_MEMTEST)
+#if defined(CONFIG_SYS_MEMTEST)
 	register unsigned long reg;
 
 	printf ("Testing DRAM\n");
 
 	/* write each mem addr with it's address */
-	for (reg = CFG_MEMTEST_START; reg < CFG_MEMTEST_END; reg += 4)
+	for (reg = CONFIG_SYS_MEMTEST_START; reg < CONFIG_SYS_MEMTEST_END; reg += 4)
 		*reg = reg;
 
-	for (reg = CFG_MEMTEST_START; reg < CFG_MEMTEST_END; reg += 4) {
+	for (reg = CONFIG_SYS_MEMTEST_START; reg < CONFIG_SYS_MEMTEST_END; reg += 4) {
 		if (*reg != reg)
 			return -1;
 	}
@@ -172,3 +173,8 @@ void video_get_info_str (int line_number, char *info)
 	return;
 }
 #endif
+
+int board_eth_init(bd_t *bis)
+{
+	return pci_eth_init(bis);
+}
diff --git a/board/eltec/elppc/flash.c b/board/eltec/elppc/flash.c
index 442dd0051..21ae09892 100644
--- a/board/eltec/elppc/flash.c
+++ b/board/eltec/elppc/flash.c
@@ -34,7 +34,7 @@
 #include <asm/processor.h>
 #include <asm/pci_io.h>
 
-flash_info_t    flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
+flash_info_t    flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */
 
 ulong flash_get_size (vu_long *addr, flash_info_t *info);
 static int write_word (flash_info_t *info, ulong dest, ulong data);
@@ -55,7 +55,7 @@ unsigned long flash_init (void)
     int i;
 
     /* Init: no FLASHes known */
-    for (i=0; i<CFG_MAX_FLASH_BANKS; ++i)
+    for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i)
     {
 	flash_info[i].flash_id = FLASH_UNKNOWN;
     }
@@ -96,8 +96,8 @@ unsigned long flash_init (void)
     if (size2 == 4*1024*1024)
     {
 	(void)flash_protect(FLAG_PROTECT_SET,
-		CFG_FLASH_BASE,
-		CFG_FLASH_BASE+monitor_flash_len-1,
+		CONFIG_SYS_FLASH_BASE,
+		CONFIG_SYS_FLASH_BASE+monitor_flash_len-1,
 		&flash_info[1]);
     }
 
@@ -370,7 +370,7 @@ int flash_erase (flash_info_t *info, int s_first, int s_last)
     last  = start;
     addr = (FLASH_WORD_SIZE *)(info->start[l_sect]);
     while ((addr[0] & (FLASH_WORD_SIZE)0x00800080) != (FLASH_WORD_SIZE)0x00800080) {
-	if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+	if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
 	    printf ("Timeout\n");
 	    return 1;
 	}
@@ -500,7 +500,7 @@ static int write_word (flash_info_t *info, ulong dest, ulong data)
 	    start = get_timer (0);
 	    while ((dest2[i] & (FLASH_WORD_SIZE)0x00800080) !=
 		   (data2[i] & (FLASH_WORD_SIZE)0x00800080)) {
-	      if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+	      if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
 		return (1);
 	      }
 	    }
diff --git a/board/eltec/elppc/misc.c b/board/eltec/elppc/misc.c
index 5fb20ae66..cbaf10b7e 100644
--- a/board/eltec/elppc/misc.c
+++ b/board/eltec/elppc/misc.c
@@ -29,7 +29,7 @@
 #include "srom.h"
 
 /* imports  */
-extern char console_buffer[CFG_CBSIZE];
+extern char console_buffer[CONFIG_SYS_CBSIZE];
 extern int l2_cache_enable (int l2control);
 extern int eepro100_write_eeprom (struct eth_device *dev, int location,
 				  int addr_len, unsigned short data);
@@ -42,7 +42,7 @@ extern int read_eeprom (struct eth_device *dev, int location, int addr_len);
 void *nvram_read (void *dest, const long src, size_t count)
 {
 	uchar *d = (uchar *) dest;
-	uchar *s = (uchar *) (CFG_ENV_MAP_ADRS + src);
+	uchar *s = (uchar *) (CONFIG_ENV_MAP_ADRS + src);
 
 	while (count--)
 		*d++ = *s++;
@@ -52,7 +52,7 @@ void *nvram_read (void *dest, const long src, size_t count)
 
 void nvram_write (long dest, const void *src, size_t count)
 {
-	uchar *d = (uchar *) (CFG_ENV_MAP_ADRS + dest);
+	uchar *d = (uchar *) (CONFIG_ENV_MAP_ADRS + dest);
 	uchar *s = (uchar *) src;
 
 	while (count--)
@@ -95,7 +95,7 @@ int misc_init_r (void)
 			  SECOND_DEVICE, FIRST_BLOCK);
 
 	/* read out current nvram shadow image */
-	nvram_read (buf, CFG_NV_SROM_COPY_ADDR, CFG_SROM_SIZE);
+	nvram_read (buf, CONFIG_SYS_NV_SROM_COPY_ADDR, CONFIG_SYS_SROM_SIZE);
 
 	if (strcmp (eerev.magic, "ELTEC") != 0) {
 		/* srom is not initialized -> create a default revision info */
@@ -124,8 +124,8 @@ int misc_init_r (void)
 	}
 
 	if ((copyNv == 0)
-	    && (el_srom_checksum ((u_char *) & eerev, CFG_SROM_SIZE) !=
-		el_srom_checksum ((u_char *) buf, CFG_SROM_SIZE))) {
+	    && (el_srom_checksum ((u_char *) & eerev, CONFIG_SYS_SROM_SIZE) !=
+		el_srom_checksum ((u_char *) buf, CONFIG_SYS_SROM_SIZE))) {
 		printf ("Invalid revision info copy in nvram !\n");
 		printf ("Press key:\n  <c> to copy current revision info to nvram.\n");
 		printf ("  <r> to reenter revision info.\n");
@@ -232,16 +232,16 @@ int misc_init_r (void)
 			printf ("OK\n\n");
 
 		/* write new values as shadow image to nvram */
-		nvram_write (CFG_NV_SROM_COPY_ADDR, (void *) &eerev,
-			     CFG_SROM_SIZE);
+		nvram_write (CONFIG_SYS_NV_SROM_COPY_ADDR, (void *) &eerev,
+			     CONFIG_SYS_SROM_SIZE);
 
 	}
 
 	/*if (initSrom) */
 	/* copy current values as shadow image to nvram */
 	if (initSrom == 0 && copyNv == 1)
-		nvram_write (CFG_NV_SROM_COPY_ADDR, (void *) &eerev,
-			     CFG_SROM_SIZE);
+		nvram_write (CONFIG_SYS_NV_SROM_COPY_ADDR, (void *) &eerev,
+			     CONFIG_SYS_SROM_SIZE);
 
 	/* update environment */
 	sprintf (buf, "%02x:%02x:%02x:%02x:%02x:%02x",
diff --git a/board/eltec/elppc/pci.c b/board/eltec/elppc/pci.c
index 5b115ea61..bf133b77d 100644
--- a/board/eltec/elppc/pci.c
+++ b/board/eltec/elppc/pci.c
@@ -42,37 +42,37 @@ void pci_init_board(void)
     hose->last_busno = 0xff;
 
     pci_set_region(hose->regions + 0,
-	CFG_PCI_MEMORY_BUS,
-	CFG_PCI_MEMORY_PHYS,
-	CFG_PCI_MEMORY_SIZE,
+	CONFIG_SYS_PCI_MEMORY_BUS,
+	CONFIG_SYS_PCI_MEMORY_PHYS,
+	CONFIG_SYS_PCI_MEMORY_SIZE,
 	PCI_REGION_MEM | PCI_REGION_MEMORY);
 
     /* PCI memory space */
     pci_set_region(hose->regions + 1,
-	CFG_PCI_MEM_BUS,
-	CFG_PCI_MEM_PHYS,
-	CFG_PCI_MEM_SIZE,
+	CONFIG_SYS_PCI_MEM_BUS,
+	CONFIG_SYS_PCI_MEM_PHYS,
+	CONFIG_SYS_PCI_MEM_SIZE,
 	PCI_REGION_MEM);
 
     /* ISA/PCI memory space */
     pci_set_region(hose->regions + 2,
-	CFG_ISA_MEM_BUS,
-	CFG_ISA_MEM_PHYS,
-	CFG_ISA_MEM_SIZE,
+	CONFIG_SYS_ISA_MEM_BUS,
+	CONFIG_SYS_ISA_MEM_PHYS,
+	CONFIG_SYS_ISA_MEM_SIZE,
 	PCI_REGION_MEM);
 
     /* PCI I/O space */
     pci_set_region(hose->regions + 3,
-	CFG_PCI_IO_BUS,
-	CFG_PCI_IO_PHYS,
-	CFG_PCI_IO_SIZE,
+	CONFIG_SYS_PCI_IO_BUS,
+	CONFIG_SYS_PCI_IO_PHYS,
+	CONFIG_SYS_PCI_IO_SIZE,
 	PCI_REGION_IO);
 
     /* ISA/PCI I/O space */
     pci_set_region(hose->regions + 4,
-	CFG_ISA_IO_BUS,
-	CFG_ISA_IO_PHYS,
-	CFG_ISA_IO_SIZE,
+	CONFIG_SYS_ISA_IO_BUS,
+	CONFIG_SYS_ISA_IO_PHYS,
+	CONFIG_SYS_ISA_IO_SIZE,
 	PCI_REGION_IO);
 
     hose->region_count = 5;
diff --git a/board/eltec/elppc/srom.h b/board/eltec/elppc/srom.h
index c18ab9164..504b742a6 100644
--- a/board/eltec/elppc/srom.h
+++ b/board/eltec/elppc/srom.h
@@ -40,8 +40,8 @@
 #define SROM_SHORT(pX)          (*(u8 *)(pX) | *((u8 *)(pX)+1) << 8)
 
 /* bab7xx ELTEC srom */
-#define I2C_BUS_DAT             (CFG_ISA_IO + 0x220)
-#define I2C_BUS_DIR             (CFG_ISA_IO + 0x221)
+#define I2C_BUS_DAT             (CONFIG_SYS_ISA_IO + 0x220)
+#define I2C_BUS_DIR             (CONFIG_SYS_ISA_IO + 0x221)
 
 /* srom at mpc107 */
 #define MPC107_I2CADDR          (mpc107_eumb_addr + 0x3000)     /* address      */
diff --git a/board/eltec/elppc/u-boot.lds b/board/eltec/elppc/u-boot.lds
index 1a95755ab..ff2d8b7fe 100644
--- a/board/eltec/elppc/u-boot.lds
+++ b/board/eltec/elppc/u-boot.lds
@@ -60,7 +60,7 @@ SECTIONS
 
 /* store the environment in a seperate sector in the boot flash */
 /*    . = env_offset; */
-/*    common/environment.o(.text) */
+/*    common/env_embedded.o(.text) */
 
     *(.text)
     *(.fixup)
@@ -131,6 +131,7 @@ SECTIONS
    *(.dynbss)
    *(.bss)
    *(COMMON)
+   . = ALIGN(4);
   }
   _end = . ;
   PROVIDE (end = .);
diff --git a/board/eltec/mhpc/flash.c b/board/eltec/mhpc/flash.c
index 4cc66a973..2fbdb2771 100644
--- a/board/eltec/mhpc/flash.c
+++ b/board/eltec/mhpc/flash.c
@@ -25,7 +25,7 @@
 #include <mpc8xx.h>
 #include <linux/byteorder/swab.h>
 
-flash_info_t	flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips	*/
+flash_info_t	flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips	*/
 
 /*-----------------------------------------------------------------------
  * Protection Flags:
@@ -62,13 +62,13 @@ static void  flash_get_offsets (ulong base, flash_info_t *info);
 
 unsigned long flash_init (void)
 {
-	volatile immap_t     *immap  = (immap_t *)CFG_IMMR;
+	volatile immap_t     *immap  = (immap_t *)CONFIG_SYS_IMMR;
 	volatile memctl8xx_t *memctl = &immap->im_memctl;
 	unsigned long size_b0;
 	int i;
 
 	/* Init: no FLASHes known */
-	for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) {
+	for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
 		flash_info[i].flash_id = FLASH_UNKNOWN;
 	}
 
@@ -81,18 +81,18 @@ unsigned long flash_init (void)
 	}
 
 	/* Remap FLASH according to real size */
-	memctl->memc_or0 = CFG_OR_TIMING_FLASH | (-size_b0 & 0xFFFF8000);
-	memctl->memc_br0 = (CFG_FLASH_BASE & BR_BA_MSK) | BR_PS_16 | BR_MS_GPCM | BR_V;
+	memctl->memc_or0 = CONFIG_SYS_OR_TIMING_FLASH | (-size_b0 & 0xFFFF8000);
+	memctl->memc_br0 = (CONFIG_SYS_FLASH_BASE & BR_BA_MSK) | BR_PS_16 | BR_MS_GPCM | BR_V;
 
 	/* Re-do sizing to get full correct info */
-	size_b0 = flash_get_size((FPW *)CFG_FLASH_BASE, &flash_info[0]);
+	size_b0 = flash_get_size((FPW *)CONFIG_SYS_FLASH_BASE, &flash_info[0]);
 
-	flash_get_offsets (CFG_FLASH_BASE, &flash_info[0]);
+	flash_get_offsets (CONFIG_SYS_FLASH_BASE, &flash_info[0]);
 
 	/* monitor protection ON by default */
 	(void)flash_protect(FLAG_PROTECT_SET,
-			    CFG_FLASH_BASE,
-			    CFG_FLASH_BASE+monitor_flash_len-1,
+			    CONFIG_SYS_FLASH_BASE,
+			    CONFIG_SYS_FLASH_BASE+monitor_flash_len-1,
 			    &flash_info[0]);
 
 	flash_info[0].size = size_b0;
@@ -203,10 +203,10 @@ static ulong flash_get_size (FPW *addr, flash_info_t *info)
 		break;
 	}
 
-	if (info->sector_count > CFG_MAX_FLASH_SECT) {
+	if (info->sector_count > CONFIG_SYS_MAX_FLASH_SECT) {
 		printf ("** ERROR: sector count %d > max (%d) **\n",
-			info->sector_count, CFG_MAX_FLASH_SECT);
-		info->sector_count = CFG_MAX_FLASH_SECT;
+			info->sector_count, CONFIG_SYS_MAX_FLASH_SECT);
+		info->sector_count = CONFIG_SYS_MAX_FLASH_SECT;
 	}
 
 	addr[0] = (FPW)0xFF00FF00;      /* restore read mode */
@@ -277,7 +277,7 @@ int	flash_erase (flash_info_t *info, int s_first, int s_last)
 			udelay (1000);
 
 			while (((status = SWAP(*addr)) & (FPW)0x00800080) != (FPW)0x00800080) {
-				if ((now=get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+				if ((now=get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
 					printf ("Timeout\n");
 					*addr = (FPW)0xB000B000; /* suspend erase */
 					*addr = (FPW)0xFF00FF00; /* reset to read mode */
@@ -419,7 +419,7 @@ static int write_data (flash_info_t *info, ulong dest, FPW data)
 	start = get_timer (0);
 
 	while (((status = SWAP(*addr)) & (FPW)0x00800080) != (FPW)0x00800080) {
-		if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+		if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
 			*addr = (FPW)0xFF00FF00;	/* restore read mode */
 			return (1);
 		}
diff --git a/board/eltec/mhpc/mhpc.c b/board/eltec/mhpc/mhpc.c
index 3666791e9..7cca6b28c 100644
--- a/board/eltec/mhpc/mhpc.c
+++ b/board/eltec/mhpc/mhpc.c
@@ -36,7 +36,7 @@
 #include <video_fb.h>
 
 /* imports from common/main.c */
-extern char console_buffer[CFG_CBSIZE];
+extern char console_buffer[CONFIG_SYS_CBSIZE];
 
 extern void eeprom_init (void);
 extern int eeprom_read (unsigned dev_addr, unsigned offset,
@@ -105,7 +105,7 @@ static const unsigned int sdram_table[] = {
 
 int board_early_init_f (void)
 {
-	volatile immap_t *im = (immap_t *) CFG_IMMR;
+	volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR;
 	volatile cpm8xx_t *cp = &(im->im_cpm);
 	volatile iop8xx_t *ip = (iop8xx_t *) & (im->im_ioport);
 
@@ -160,7 +160,7 @@ int misc_init_r (void)
 	int i;
 
 	/* check revision data */
-	eeprom_read (CFG_I2C_EEPROM_ADDR, 480, (uchar *) &mhpcRevInfo, 32);
+	eeprom_read (CONFIG_SYS_I2C_EEPROM_ADDR, 480, (uchar *) &mhpcRevInfo, 32);
 
 	if (strncmp ((char *) &mhpcRevInfo.board[2], "MHPC", 4) != 0) {
 		printf ("Enter revision number (0-9): %c  ",
@@ -228,7 +228,7 @@ int misc_init_r (void)
 		}
 
 		/* setup new revision data */
-		eeprom_write (CFG_I2C_EEPROM_ADDR, 480, (uchar *) &mhpcRevInfo,
+		eeprom_write (CONFIG_SYS_I2C_EEPROM_ADDR, 480, (uchar *) &mhpcRevInfo,
 			      32);
 	}
 
@@ -253,13 +253,13 @@ int misc_init_r (void)
 
 phys_size_t initdram (int board_type)
 {
-	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
 	volatile memctl8xx_t *memctl = &immap->im_memctl;
 
 	upmconfig (UPMA, (uint *) sdram_table,
 		   sizeof (sdram_table) / sizeof (uint));
 
-	memctl->memc_mamr = CFG_MAMR & (~(MAMR_PTAE));	/* no refresh yet */
+	memctl->memc_mamr = CONFIG_SYS_MAMR & (~(MAMR_PTAE));	/* no refresh yet */
 	memctl->memc_mbmr = MBMR_GPL_B4DIS;	/* should this be mamr? - NTL */
 	memctl->memc_mptpr = MPTPR_PTP_DIV64;
 	memctl->memc_mar = 0x00008800;
@@ -267,15 +267,15 @@ phys_size_t initdram (int board_type)
 	/*
 	 * Map controller SDRAM bank 0
 	 */
-	memctl->memc_or1 = CFG_OR1_PRELIM;
-	memctl->memc_br1 = CFG_BR1_PRELIM;
+	memctl->memc_or1 = CONFIG_SYS_OR1_PRELIM;
+	memctl->memc_br1 = CONFIG_SYS_BR1_PRELIM;
 	udelay (200);
 
 	/*
 	 * Map controller SDRAM bank 1
 	 */
-	memctl->memc_or2 = CFG_OR2;
-	memctl->memc_br2 = CFG_BR2;
+	memctl->memc_or2 = CONFIG_SYS_OR2;
+	memctl->memc_br2 = CONFIG_SYS_BR2;
 
 	/*
 	 * Perform SDRAM initializsation sequence
@@ -419,7 +419,7 @@ void *video_hw_init (void)
 {
 	unsigned int clut = 0;
 	unsigned char *penv;
-	immap_t *immr = (immap_t *) CFG_IMMR;
+	immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
 
 	/* enable video only on CLUT value */
 	if ((penv = (uchar *)getenv ("clut")) != NULL)
@@ -470,7 +470,7 @@ void video_set_lut (unsigned int index,
 		    unsigned char r, unsigned char g, unsigned char b)
 {
 	unsigned int lum;
-	unsigned short *pLut = (unsigned short *) (CFG_IMMR + 0x0e00);
+	unsigned short *pLut = (unsigned short *) (CONFIG_SYS_IMMR + 0x0e00);
 
 	/* 16 bit lut values, 12 bit used, xxxx BBGG RRii iiii */
 	/* y = 0.299*R + 0.587*G + 0.114*B */
diff --git a/board/eltec/mhpc/u-boot.lds b/board/eltec/mhpc/u-boot.lds
index 85117aa56..759b41290 100644
--- a/board/eltec/mhpc/u-boot.lds
+++ b/board/eltec/mhpc/u-boot.lds
@@ -53,7 +53,7 @@ SECTIONS
   .text      :
   {
     cpu/mpc8xx/start.o	(.text)
-    common/environment.o(.text)
+    common/env_embedded.o(.text)
 
     *(.text)
     *(.fixup)
@@ -124,6 +124,7 @@ SECTIONS
    *(.dynbss)
    *(.bss)
    *(COMMON)
+   . = ALIGN(4);
   }
   _end = . ;
   PROVIDE (end = .);
diff --git a/board/eltec/mhpc/u-boot.lds.debug b/board/eltec/mhpc/u-boot.lds.debug
index 85072feda..dbec9860a 100644
--- a/board/eltec/mhpc/u-boot.lds.debug
+++ b/board/eltec/mhpc/u-boot.lds.debug
@@ -61,7 +61,7 @@ SECTIONS
     lib_generic/crc32.o		(.text)
 
     . = env_offset;
-    common/environment.o(.text)
+    common/env_embedded.o(.text)
 
     *(.text)
     *(.fixup)
diff --git a/board/emk/common/flash.c b/board/emk/common/flash.c
index d6161bf35..330978b95 100644
--- a/board/emk/common/flash.c
+++ b/board/emk/common/flash.c
@@ -26,7 +26,7 @@
 
 #include <common.h>
 
-flash_info_t	flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
+flash_info_t	flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */
 
 #if defined (CONFIG_TOP860)
   typedef unsigned short FLASH_PORT_WIDTH;
@@ -95,7 +95,7 @@ unsigned long flash_init (void)
 	int i = 0;
 	extern void flash_preinit(void);
 	extern void flash_afterinit(uint, ulong, ulong);
-	ulong flashbase = CFG_FLASH_BASE;
+	ulong flashbase = CONFIG_SYS_FLASH_BASE;
 
 	flash_preinit();
 
@@ -105,20 +105,20 @@ unsigned long flash_init (void)
 			flash_get_size((FPW *)flashbase, &flash_info[i]);
 	size += flash_info[i].size;
 
-#if CFG_MONITOR_BASE >= CFG_FLASH_BASE
+#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE
 	/* monitor protection ON by default */
 	flash_protect(FLAG_PROTECT_SET,
-		      CFG_MONITOR_BASE,
-		      CFG_MONITOR_BASE+monitor_flash_len-1,
-		      flash_get_info(CFG_MONITOR_BASE));
+		      CONFIG_SYS_MONITOR_BASE,
+		      CONFIG_SYS_MONITOR_BASE+monitor_flash_len-1,
+		      flash_get_info(CONFIG_SYS_MONITOR_BASE));
 #endif
 
-#ifdef	CFG_ENV_IS_IN_FLASH
+#ifdef	CONFIG_ENV_IS_IN_FLASH
 	/* ENV protection ON by default */
 	flash_protect(FLAG_PROTECT_SET,
-		      CFG_ENV_ADDR,
-		      CFG_ENV_ADDR+CFG_ENV_SIZE-1,
-		      flash_get_info(CFG_ENV_ADDR));
+		      CONFIG_ENV_ADDR,
+		      CONFIG_ENV_ADDR+CONFIG_ENV_SIZE-1,
+		      flash_get_info(CONFIG_ENV_ADDR));
 #endif
 
 
@@ -147,14 +147,14 @@ static flash_info_t *flash_get_info(ulong base)
 	int i;
 	flash_info_t * info;
 
-	for (i = 0; i < CFG_MAX_FLASH_BANKS; i ++) {
+	for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i ++) {
 		info = & flash_info[i];
 		if (info->size &&
 			info->start[0] <= base && base <= info->start[0] + info->size - 1)
 			break;
 	}
 
-	return i == CFG_MAX_FLASH_BANKS ? 0 : info;
+	return i == CONFIG_SYS_MAX_FLASH_BANKS ? 0 : info;
 }
 
 /*-----------------------------------------------------------------------
@@ -459,7 +459,7 @@ int	flash_erase (flash_info_t *info, int s_first, int s_last)
 		udelay (1000);
 
 		while ((*addr & (FPW)0x00800080) != (FPW)0x00800080) {
-			if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+			if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
 				printf ("Timeout\n");
 
 				if (intel) {
@@ -473,14 +473,14 @@ int	flash_erase (flash_info_t *info, int s_first, int s_last)
 			}
 
 			/* show that we're waiting */
-			if ((get_timer(last)) > CFG_HZ) {/* every second */
+			if ((get_timer(last)) > CONFIG_SYS_HZ) {/* every second */
 				putc ('.');
 				last = get_timer(0);
 			}
 		}
 
 		/* show that we're waiting */
-		if ((get_timer(last)) > CFG_HZ) {	/* every second */
+		if ((get_timer(last)) > CONFIG_SYS_HZ) {	/* every second */
 			putc ('.');
 			last = get_timer(0);
 		}
@@ -581,7 +581,7 @@ static int write_word_amd (flash_info_t *info, FPWV *dest, FPW data)
 
 	/* data polling for D7 */
 	while (res == 0 && (*dest & (FPW)0x00800080) != (data & (FPW)0x00800080)) {
-		if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+		if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
 			*dest = (FPW)0x00F000F0;	/* reset bank */
 			res = 1;
 		}
diff --git a/board/emk/common/vpd.c b/board/emk/common/vpd.c
index 8a3a12b04..c2af21952 100644
--- a/board/emk/common/vpd.c
+++ b/board/emk/common/vpd.c
@@ -36,8 +36,8 @@ void read_factory_r (void)
 	uint len;
 
 	/* get length first */
-	addr = CFG_FACT_OFFSET;
-	if (eeprom_read (CFG_I2C_FACT_ADDR, addr, buf, 2)) {
+	addr = CONFIG_SYS_FACT_OFFSET;
+	if (eeprom_read (CONFIG_SYS_I2C_FACT_ADDR, addr, buf, 2)) {
 	  bailout:
 		printf ("cannot read factory configuration\n");
 		printf ("be sure to set ethaddr	yourself!\n");
@@ -47,14 +47,14 @@ void read_factory_r (void)
 	addr += 2;
 
 	/* sanity check */
-	if (length < 20 || length > CFG_FACT_SIZE - 2)
+	if (length < 20 || length > CONFIG_SYS_FACT_SIZE - 2)
 		goto bailout;
 
 	/* read lines */
 	while (length > 0) {
 		/* read one line */
 		len = length > 80 ? 80 : length;
-		if (eeprom_read (CFG_I2C_FACT_ADDR, addr, buf, len))
+		if (eeprom_read (CONFIG_SYS_I2C_FACT_ADDR, addr, buf, len))
 			goto bailout;
 		/* mark end of buffer */
 		buf[len] = 0;
diff --git a/board/emk/top5200/top5200.c b/board/emk/top5200/top5200.c
index 27886261c..7efbcb089 100644
--- a/board/emk/top5200/top5200.c
+++ b/board/emk/top5200/top5200.c
@@ -35,7 +35,7 @@
 phys_size_t initdram (int board_type)
 {
 	ulong dramsize = 0;
-#ifndef CFG_RAMBOOT
+#ifndef CONFIG_SYS_RAMBOOT
 #if 0
 	ulong	t;
 	ulong	tap_del;
@@ -46,33 +46,33 @@ phys_size_t initdram (int board_type)
 	#define	SOFT_REF	4
 
 	/* configure SDRAM start/end */
-	*(vu_long *)MPC5XXX_SDRAM_CS0CFG = (CFG_SDRAM_BASE & 0xFFF00000) | CFG_DRAM_RAM_SIZE;
+	*(vu_long *)MPC5XXX_SDRAM_CS0CFG = (CONFIG_SYS_SDRAM_BASE & 0xFFF00000) | CONFIG_SYS_DRAM_RAM_SIZE;
 	*(vu_long *)MPC5XXX_SDRAM_CS1CFG = 0x80000000;	/* disabled */
 
 	/* setup config registers */
-	*(vu_long *)MPC5XXX_SDRAM_CONFIG1 = CFG_DRAM_CONFIG1;
-	*(vu_long *)MPC5XXX_SDRAM_CONFIG2 = CFG_DRAM_CONFIG2;
+	*(vu_long *)MPC5XXX_SDRAM_CONFIG1 = CONFIG_SYS_DRAM_CONFIG1;
+	*(vu_long *)MPC5XXX_SDRAM_CONFIG2 = CONFIG_SYS_DRAM_CONFIG2;
 
 	/* unlock mode register */
-	*(vu_long *)MPC5XXX_SDRAM_CTRL = CFG_DRAM_CONTROL | MODE_EN;
+	*(vu_long *)MPC5XXX_SDRAM_CTRL = CONFIG_SYS_DRAM_CONTROL | MODE_EN;
 	/* precharge all banks */
-	*(vu_long *)MPC5XXX_SDRAM_CTRL = CFG_DRAM_CONTROL | MODE_EN | SOFT_PRE;
-#ifdef CFG_DRAM_DDR
+	*(vu_long *)MPC5XXX_SDRAM_CTRL = CONFIG_SYS_DRAM_CONTROL | MODE_EN | SOFT_PRE;
+#ifdef CONFIG_SYS_DRAM_DDR
 	/* set extended mode register */
-	*(vu_short *)MPC5XXX_SDRAM_MODE = CFG_DRAM_EMODE;
+	*(vu_short *)MPC5XXX_SDRAM_MODE = CONFIG_SYS_DRAM_EMODE;
 #endif
 	/* set mode register */
-	*(vu_short *)MPC5XXX_SDRAM_MODE = CFG_DRAM_MODE | 0x0400;
+	*(vu_short *)MPC5XXX_SDRAM_MODE = CONFIG_SYS_DRAM_MODE | 0x0400;
 	/* precharge all banks */
-	*(vu_long *)MPC5XXX_SDRAM_CTRL = CFG_DRAM_CONTROL | MODE_EN | SOFT_PRE;
+	*(vu_long *)MPC5XXX_SDRAM_CTRL = CONFIG_SYS_DRAM_CONTROL | MODE_EN | SOFT_PRE;
 	/* auto refresh */
-	*(vu_long *)MPC5XXX_SDRAM_CTRL = CFG_DRAM_CONTROL | MODE_EN | SOFT_REF;
+	*(vu_long *)MPC5XXX_SDRAM_CTRL = CONFIG_SYS_DRAM_CONTROL | MODE_EN | SOFT_REF;
 	/* set mode register */
-	*(vu_short *)MPC5XXX_SDRAM_MODE = CFG_DRAM_MODE;
+	*(vu_short *)MPC5XXX_SDRAM_MODE = CONFIG_SYS_DRAM_MODE;
 	/* normal operation */
-	*(vu_long *)MPC5XXX_SDRAM_CTRL = CFG_DRAM_CONTROL;
+	*(vu_long *)MPC5XXX_SDRAM_CTRL = CONFIG_SYS_DRAM_CONTROL;
 	/* write default TAP delay */
-	*(vu_long *)MPC5XXX_CDM_PORCFG = CFG_DRAM_TAP_DEL << 24;
+	*(vu_long *)MPC5XXX_CDM_PORCFG = CONFIG_SYS_DRAM_TAP_DEL << 24;
 
 #if 0
 	for (tap_del = 0; tap_del < 32; tap_del++)
@@ -97,7 +97,7 @@ phys_size_t initdram (int board_type)
 		}
 	}
 #endif
-#endif /* CFG_RAMBOOT */
+#endif /* CONFIG_SYS_RAMBOOT */
 
 	dramsize = ((1 << (*(vu_long *)MPC5XXX_SDRAM_CS0CFG - 0x13)) << 20);
 
diff --git a/board/emk/top860/top860.c b/board/emk/top860/top860.c
index aca4991f5..76f7a0c5f 100644
--- a/board/emk/top860/top860.c
+++ b/board/emk/top860/top860.c
@@ -78,7 +78,7 @@ int checkboard (void)
  *****************************************************************************/
 phys_size_t initdram (int board_type)
 {
-	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
 	volatile memctl8xx_t *memctl = &immap->im_memctl;
 
 	/*
@@ -93,8 +93,8 @@ phys_size_t initdram (int board_type)
 			   sizeof (edo_60ns_25MHz_tbl) / sizeof (uint));
 		memctl->memc_mptpr = 0x0200;
 		memctl->memc_mamr = 0x0ca20330;
-		memctl->memc_or2 = -CFG_DRAM_MAX | OR_CSNT_SAM;
-		memctl->memc_br2 = CFG_DRAM_BASE | BR_MS_UPMA | BR_V;
+		memctl->memc_or2 = -CONFIG_SYS_DRAM_MAX | OR_CSNT_SAM;
+		memctl->memc_br2 = CONFIG_SYS_DRAM_BASE | BR_MS_UPMA | BR_V;
 		/*
 		 * Do 8 read accesses to DRAM
 		 */
@@ -112,7 +112,7 @@ phys_size_t initdram (int board_type)
 		addr2[1] = 0x47110815;
 		if (addr1[0] == 0xfeedc0de && addr1[1] == 0x47110815) {
 			/* only 4MB populated */
-			memctl->memc_or2 = -(CFG_DRAM_MAX / 4) | OR_CSNT_SAM;
+			memctl->memc_or2 = -(CONFIG_SYS_DRAM_MAX / 4) | OR_CSNT_SAM;
 		}
 	}
 
diff --git a/board/emk/top860/u-boot.lds b/board/emk/top860/u-boot.lds
index 97ef89a40..da23fff14 100644
--- a/board/emk/top860/u-boot.lds
+++ b/board/emk/top860/u-boot.lds
@@ -124,6 +124,7 @@ SECTIONS
    *(.dynbss)
    *(.bss)
    *(COMMON)
+   . = ALIGN(4);
   }
   _end = . ;
   PROVIDE (end = .);
diff --git a/board/emk/top860/u-boot.lds.debug b/board/emk/top860/u-boot.lds.debug
index 5d97095c1..82e8dce83 100644
--- a/board/emk/top860/u-boot.lds.debug
+++ b/board/emk/top860/u-boot.lds.debug
@@ -62,7 +62,7 @@ SECTIONS
     lib_ppc/extable.o	(.text)
 
     . = env_offset;
-    common/environment.o(.text)
+    common/env_embedded.o(.text)
 
     *(.text)
     *(.fixup)
diff --git a/board/ep7312/flash.c b/board/ep7312/flash.c
index 272a9e5cc..0c2b3aedc 100644
--- a/board/ep7312/flash.c
+++ b/board/ep7312/flash.c
@@ -27,7 +27,7 @@
 #define FLASH_BANK_SIZE 0x1000000
 #define MAIN_SECT_SIZE  0x20000
 
-flash_info_t    flash_info[CFG_MAX_FLASH_BANKS];
+flash_info_t    flash_info[CONFIG_SYS_MAX_FLASH_BANKS];
 
 
 /*-----------------------------------------------------------------------
@@ -38,15 +38,15 @@ ulong flash_init (void)
 	int i, j;
 	ulong size = 0;
 
-	for (i = 0; i < CFG_MAX_FLASH_BANKS; i++) {
+	for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) {
 		ulong flashbase = 0;
 
 		flash_info[i].flash_id =
 				(INTEL_MANUFACT & FLASH_VENDMASK) |
 				(INTEL_ID_28F128J3 & FLASH_TYPEMASK);
 		flash_info[i].size = FLASH_BANK_SIZE;
-		flash_info[i].sector_count = CFG_MAX_FLASH_SECT;
-		memset (flash_info[i].protect, 0, CFG_MAX_FLASH_SECT);
+		flash_info[i].sector_count = CONFIG_SYS_MAX_FLASH_SECT;
+		memset (flash_info[i].protect, 0, CONFIG_SYS_MAX_FLASH_SECT);
 		if (i == 0)
 			flashbase = PHYS_FLASH_1;
 		else
@@ -60,13 +60,13 @@ ulong flash_init (void)
 	/* Protect monitor and environment sectors
 	 */
 	flash_protect ( FLAG_PROTECT_SET,
-			CFG_FLASH_BASE,
-			CFG_FLASH_BASE + monitor_flash_len - 1,
+			CONFIG_SYS_FLASH_BASE,
+			CONFIG_SYS_FLASH_BASE + monitor_flash_len - 1,
 			&flash_info[0]);
 
 	flash_protect ( FLAG_PROTECT_SET,
-			CFG_ENV_ADDR,
-			CFG_ENV_ADDR + CFG_ENV_SIZE - 1, &flash_info[0]);
+			CONFIG_ENV_ADDR,
+			CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1, &flash_info[0]);
 
 	return size;
 }
@@ -165,7 +165,7 @@ int flash_erase (flash_info_t * info, int s_first, int s_last)
 			*addr = 0xD0;		/* erase confirm */
 
 			while ((*addr & 0x80) != 0x80) {
-				if (get_timer_masked () > CFG_FLASH_ERASE_TOUT) {
+				if (get_timer_masked () > CONFIG_SYS_FLASH_ERASE_TOUT) {
 					*addr = 0xB0;	/* suspend erase */
 					*addr = 0xFF;	/* reset to read mode */
 					rc = ERR_TIMOUT;
@@ -232,7 +232,7 @@ static int write_word (flash_info_t * info, ulong dest, ushort data)
 
 	/* wait while polling the status register */
 	while (((val = *addr) & 0x80) != 0x80) {
-		if (get_timer_masked () > CFG_FLASH_WRITE_TOUT) {
+		if (get_timer_masked () > CONFIG_SYS_FLASH_WRITE_TOUT) {
 			rc = ERR_TIMOUT;
 			/* suspend program command */
 			*addr = 0xB0;
diff --git a/board/ep7312/u-boot.lds b/board/ep7312/u-boot.lds
index 4a89cebaa..a79bb8cb8 100644
--- a/board/ep7312/u-boot.lds
+++ b/board/ep7312/u-boot.lds
@@ -51,6 +51,6 @@ SECTIONS
 
 	. = ALIGN(4);
 	__bss_start = .;
-	.bss (NOLOAD) : { *(.bss) }
+	.bss (NOLOAD) : { *(.bss) . = ALIGN(4); }
 	_end = .;
 }
diff --git a/board/ep8248/ep8248.c b/board/ep8248/ep8248.c
index 4cfb2acc8..bc20ba739 100644
--- a/board/ep8248/ep8248.c
+++ b/board/ep8248/ep8248.c
@@ -35,31 +35,31 @@
  * according to the five values podr/pdir/ppar/psor/pdat for that entry
  */
 
-#define CFG_FCC1 (CONFIG_ETHER_INDEX == 1)
-#define CFG_FCC2 (CONFIG_ETHER_INDEX == 2)
+#define CONFIG_SYS_FCC1 (CONFIG_ETHER_INDEX == 1)
+#define CONFIG_SYS_FCC2 (CONFIG_ETHER_INDEX == 2)
 
 const iop_conf_t iop_conf_tab[4][32] = {
 
     /* Port A */
     {	/*	      conf      ppar psor pdir podr pdat */
-	/* PA31 */ { CFG_FCC1,   1,   1,   0,   0,   0 }, /* FCC1 MII COL    */
-	/* PA30 */ { CFG_FCC1,   1,   1,   0,   0,   0 }, /* FCC1 MII CRS    */
-	/* PA29 */ { CFG_FCC1,   1,   1,   1,   0,   0 }, /* FCC1 MII TX_ER  */
-	/* PA28 */ { CFG_FCC1,   1,   1,   1,   0,   0 }, /* FCC1 MII TX_EN  */
-	/* PA27 */ { CFG_FCC1,   1,   1,   0,   0,   0 }, /* FCC1 MII RX_DV  */
-	/* PA26 */ { CFG_FCC1,   1,   1,   0,   0,   0 }, /* FCC1 MII RX_ER  */
+	/* PA31 */ { CONFIG_SYS_FCC1,   1,   1,   0,   0,   0 }, /* FCC1 MII COL    */
+	/* PA30 */ { CONFIG_SYS_FCC1,   1,   1,   0,   0,   0 }, /* FCC1 MII CRS    */
+	/* PA29 */ { CONFIG_SYS_FCC1,   1,   1,   1,   0,   0 }, /* FCC1 MII TX_ER  */
+	/* PA28 */ { CONFIG_SYS_FCC1,   1,   1,   1,   0,   0 }, /* FCC1 MII TX_EN  */
+	/* PA27 */ { CONFIG_SYS_FCC1,   1,   1,   0,   0,   0 }, /* FCC1 MII RX_DV  */
+	/* PA26 */ { CONFIG_SYS_FCC1,   1,   1,   0,   0,   0 }, /* FCC1 MII RX_ER  */
 	/* PA25 */ { 0,          0,   0,   0,   0,   0 }, /* PA25            */
 	/* PA24 */ { 0,          0,   0,   0,   0,   0 }, /* PA24            */
 	/* PA23 */ { 0,          0,   0,   0,   0,   0 }, /* PA23            */
 	/* PA22 */ { 0,          0,   0,   0,   0,   0 }, /* PA22            */
-	/* PA21 */ { CFG_FCC1,   1,   0,   1,   0,   0 }, /* FCC1 MII TxD[3] */
-	/* PA20 */ { CFG_FCC1,   1,   0,   1,   0,   0 }, /* FCC1 MII TxD[2] */
-	/* PA19 */ { CFG_FCC1,   1,   0,   1,   0,   0 }, /* FCC1 MII TxD[1] */
-	/* PA18 */ { CFG_FCC1,   1,   0,   1,   0,   0 }, /* FCC1 MII TxD[0] */
-	/* PA17 */ { CFG_FCC1,   1,   0,   0,   0,   0 }, /* FCC1 MII RxD[0] */
-	/* PA16 */ { CFG_FCC1,   1,   0,   0,   0,   0 }, /* FCC1 MII RxD[1] */
-	/* PA15 */ { CFG_FCC1,   1,   0,   0,   0,   0 }, /* FCC1 MII RxD[2] */
-	/* PA14 */ { CFG_FCC1,   1,   0,   0,   0,   0 }, /* FCC1 MII RxD[3] */
+	/* PA21 */ { CONFIG_SYS_FCC1,   1,   0,   1,   0,   0 }, /* FCC1 MII TxD[3] */
+	/* PA20 */ { CONFIG_SYS_FCC1,   1,   0,   1,   0,   0 }, /* FCC1 MII TxD[2] */
+	/* PA19 */ { CONFIG_SYS_FCC1,   1,   0,   1,   0,   0 }, /* FCC1 MII TxD[1] */
+	/* PA18 */ { CONFIG_SYS_FCC1,   1,   0,   1,   0,   0 }, /* FCC1 MII TxD[0] */
+	/* PA17 */ { CONFIG_SYS_FCC1,   1,   0,   0,   0,   0 }, /* FCC1 MII RxD[0] */
+	/* PA16 */ { CONFIG_SYS_FCC1,   1,   0,   0,   0,   0 }, /* FCC1 MII RxD[1] */
+	/* PA15 */ { CONFIG_SYS_FCC1,   1,   0,   0,   0,   0 }, /* FCC1 MII RxD[2] */
+	/* PA14 */ { CONFIG_SYS_FCC1,   1,   0,   0,   0,   0 }, /* FCC1 MII RxD[3] */
 	/* PA13 */ { 0,          0,   0,   0,   0,   0 }, /* PA13            */
 	/* PA12 */ { 0,          0,   0,   0,   0,   0 }, /* PA12            */
 	/* PA11 */ { 0,          0,   0,   0,   0,   0 }, /* PA11            */
@@ -78,20 +78,20 @@ const iop_conf_t iop_conf_tab[4][32] = {
 
     /* Port B */
     {   /*	      conf      ppar psor pdir podr pdat */
-	/* PB31 */ { CFG_FCC2,   1,   0,   1,   0,   0 }, /* FCC2 MII TX_ER  */
-	/* PB30 */ { CFG_FCC2,   1,   0,   0,   0,   0 }, /* FCC2 MII RX_DV  */
-	/* PB29 */ { CFG_FCC2,   1,   1,   1,   0,   0 }, /* FCC2 MII TX_EN  */
-	/* PB28 */ { CFG_FCC2,   1,   0,   0,   0,   0 }, /* FCC2 MII RX_ER  */
-	/* PB27 */ { CFG_FCC2,   1,   0,   0,   0,   0 }, /* FCC2 MII COL    */
-	/* PB26 */ { CFG_FCC2,   1,   0,   0,   0,   0 }, /* FCC2 MII CRS    */
-	/* PB25 */ { CFG_FCC2,   1,   0,   1,   0,   0 }, /* FCC2 MII TxD[3] */
-	/* PB24 */ { CFG_FCC2,   1,   0,   1,   0,   0 }, /* FCC2 MII TxD[2] */
-	/* PB23 */ { CFG_FCC2,   1,   0,   1,   0,   0 }, /* FCC2 MII TxD[1] */
-	/* PB22 */ { CFG_FCC2,   1,   0,   1,   0,   0 }, /* FCC2 MII TxD[0] */
-	/* PB21 */ { CFG_FCC2,   1,   0,   0,   0,   0 }, /* FCC2 MII RxD[0] */
-	/* PB20 */ { CFG_FCC2,   1,   0,   0,   0,   0 }, /* FCC2 MII RxD[1] */
-	/* PB19 */ { CFG_FCC2,   1,   0,   0,   0,   0 }, /* FCC2 MII RxD[2] */
-	/* PB18 */ { CFG_FCC2,   1,   0,   0,   0,   0 }, /* FCC2 MII RxD[3] */
+	/* PB31 */ { CONFIG_SYS_FCC2,   1,   0,   1,   0,   0 }, /* FCC2 MII TX_ER  */
+	/* PB30 */ { CONFIG_SYS_FCC2,   1,   0,   0,   0,   0 }, /* FCC2 MII RX_DV  */
+	/* PB29 */ { CONFIG_SYS_FCC2,   1,   1,   1,   0,   0 }, /* FCC2 MII TX_EN  */
+	/* PB28 */ { CONFIG_SYS_FCC2,   1,   0,   0,   0,   0 }, /* FCC2 MII RX_ER  */
+	/* PB27 */ { CONFIG_SYS_FCC2,   1,   0,   0,   0,   0 }, /* FCC2 MII COL    */
+	/* PB26 */ { CONFIG_SYS_FCC2,   1,   0,   0,   0,   0 }, /* FCC2 MII CRS    */
+	/* PB25 */ { CONFIG_SYS_FCC2,   1,   0,   1,   0,   0 }, /* FCC2 MII TxD[3] */
+	/* PB24 */ { CONFIG_SYS_FCC2,   1,   0,   1,   0,   0 }, /* FCC2 MII TxD[2] */
+	/* PB23 */ { CONFIG_SYS_FCC2,   1,   0,   1,   0,   0 }, /* FCC2 MII TxD[1] */
+	/* PB22 */ { CONFIG_SYS_FCC2,   1,   0,   1,   0,   0 }, /* FCC2 MII TxD[0] */
+	/* PB21 */ { CONFIG_SYS_FCC2,   1,   0,   0,   0,   0 }, /* FCC2 MII RxD[0] */
+	/* PB20 */ { CONFIG_SYS_FCC2,   1,   0,   0,   0,   0 }, /* FCC2 MII RxD[1] */
+	/* PB19 */ { CONFIG_SYS_FCC2,   1,   0,   0,   0,   0 }, /* FCC2 MII RxD[2] */
+	/* PB18 */ { CONFIG_SYS_FCC2,   1,   0,   0,   0,   0 }, /* FCC2 MII RxD[3] */
 	/* PB17 */ { 0,          0,   0,   0,   0,   0 }, /* non-existent    */
 	/* PB16 */ { 0,          0,   0,   0,   0,   0 }, /* non-existent    */
 	/* PB15 */ { 0,          0,   0,   0,   0,   0 }, /* non-existent    */
@@ -123,11 +123,11 @@ const iop_conf_t iop_conf_tab[4][32] = {
 	/* PC25 */ { 0,          0,   0,   0,   0,   0 }, /* PC25            */
 	/* PC24 */ { 0,          0,   0,   0,   0,   0 }, /* PC24            */
 	/* PC23 */ { 0,          0,   0,   0,   0,   0 }, /* PC23            */
-	/* PC22 */ { CFG_FCC1,   1,   0,   0,   0,   0 }, /* FCC1 RxClk (CLK10) */
-	/* PC21 */ { CFG_FCC1,   1,   0,   0,   0,   0 }, /* FCC1 TxClk (CLK11) */
+	/* PC22 */ { CONFIG_SYS_FCC1,   1,   0,   0,   0,   0 }, /* FCC1 RxClk (CLK10) */
+	/* PC21 */ { CONFIG_SYS_FCC1,   1,   0,   0,   0,   0 }, /* FCC1 TxClk (CLK11) */
 	/* PC20 */ { 0,          0,   0,   0,   0,   0 }, /* PC20            */
-	/* PC19 */ { CFG_FCC2,   1,   0,   0,   0,   0 }, /* FCC2 RxClk (CLK13) */
-	/* PC18 */ { CFG_FCC2,   1,   0,   0,   0,   0 }, /* FCC2 TxClk (CLK14) */
+	/* PC19 */ { CONFIG_SYS_FCC2,   1,   0,   0,   0,   0 }, /* FCC2 RxClk (CLK13) */
+	/* PC18 */ { CONFIG_SYS_FCC2,   1,   0,   0,   0,   0 }, /* FCC2 TxClk (CLK14) */
 	/* PC17 */ { 0,          0,   0,   0,   0,   0 }, /* PC17            */
 	/* PC16 */ { 0,          0,   0,   0,   0,   0 }, /* PC16            */
 	/* PC15 */ { 0,          0,   0,   0,   0,   0 }, /* PC15            */
@@ -187,7 +187,7 @@ const iop_conf_t iop_conf_tab[4][32] = {
 
 int board_early_init_f (void)
 {
-	vu_char *bcsr = (vu_char *)CFG_BCSR;
+	vu_char *bcsr = (vu_char *)CONFIG_SYS_BCSR;
 
 	bcsr[4] |= 0x30; /* Turn the LEDs off */
 
@@ -198,39 +198,39 @@ int board_early_init_f (void)
 	bcsr[7] |= 0x10;
 #endif
 
-#if CFG_FCC1
+#if CONFIG_SYS_FCC1
 	bcsr[8] |= 0xC0;
-#endif /* CFG_FCC1 */
-#if CFG_FCC2
+#endif /* CONFIG_SYS_FCC1 */
+#if CONFIG_SYS_FCC2
 	bcsr[8] |= 0x30;
-#endif /* CFG_FCC2 */
+#endif /* CONFIG_SYS_FCC2 */
 
 	return 0;
 }
 
 phys_size_t initdram(int board_type)
 {
-	vu_char *bcsr = (vu_char *)CFG_BCSR;
+	vu_char *bcsr = (vu_char *)CONFIG_SYS_BCSR;
 	long int msize = 16L << (bcsr[2] & 3);
 
-#ifndef CFG_RAMBOOT
-	volatile immap_t *immap = (immap_t *)CFG_IMMR;
+#ifndef CONFIG_SYS_RAMBOOT
+	volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR;
 	volatile memctl8260_t *memctl = &immap->im_memctl;
-	vu_char *ramaddr = (vu_char *)CFG_SDRAM_BASE;
+	vu_char *ramaddr = (vu_char *)CONFIG_SYS_SDRAM_BASE;
 	uchar c = 0xFF;
-	uint psdmr = CFG_PSDMR;
+	uint psdmr = CONFIG_SYS_PSDMR;
 	int i;
 
 	immap->im_siu_conf.sc_ppc_acr  = 0x02;
 	immap->im_siu_conf.sc_ppc_alrh = 0x30126745;
 	immap->im_siu_conf.sc_tescr1   = 0x00004000;
 
-	memctl->memc_mptpr = CFG_MPTPR;
+	memctl->memc_mptpr = CONFIG_SYS_MPTPR;
 
 	/* Initialise 60x bus SDRAM */
-	memctl->memc_psrt = CFG_PSRT;
-	memctl->memc_or1  = CFG_SDRAM_OR;
-	memctl->memc_br1  = CFG_SDRAM_BR;
+	memctl->memc_psrt = CONFIG_SYS_PSRT;
+	memctl->memc_or1  = CONFIG_SYS_SDRAM_OR;
+	memctl->memc_br1  = CONFIG_SYS_SDRAM_BR;
 	memctl->memc_psdmr = psdmr | PSDMR_OP_PREA; /* Precharge all banks */
 	*ramaddr = c;
 	memctl->memc_psdmr = psdmr | PSDMR_OP_CBRR; /* CBR refresh */
@@ -240,7 +240,7 @@ phys_size_t initdram(int board_type)
 	*ramaddr = c;
 	memctl->memc_psdmr = psdmr | PSDMR_RFEN;    /* Refresh enable */
 	*ramaddr = c;
-#endif /* !CFG_RAMBOOT */
+#endif /* !CONFIG_SYS_RAMBOOT */
 
 	/* Return total 60x bus SDRAM size */
 	return msize * 1024 * 1024;
@@ -248,7 +248,7 @@ phys_size_t initdram(int board_type)
 
 int checkboard(void)
 {
-	vu_char *bcsr = (vu_char *)CFG_BCSR;
+	vu_char *bcsr = (vu_char *)CONFIG_SYS_BCSR;
 
 	puts("Board: ");
 	switch (bcsr[0]) {
diff --git a/board/ep8260/config.mk b/board/ep8260/config.mk
index eaf1560e6..1225830be 100644
--- a/board/ep8260/config.mk
+++ b/board/ep8260/config.mk
@@ -25,7 +25,7 @@
 # EP8260 boards
 #
 
-# This should be equal to the CFG_FLASH_BASE define in config_ep8260.h
+# This should be equal to the CONFIG_SYS_FLASH_BASE define in config_ep8260.h
 # for the "final" configuration, with U-Boot in flash, or the address
 # in RAM where U-Boot is loaded at for debugging.
 #
diff --git a/board/ep8260/ep8260.c b/board/ep8260/ep8260.c
index 0e43c6df9..90ab047f7 100644
--- a/board/ep8260/ep8260.c
+++ b/board/ep8260/ep8260.c
@@ -190,12 +190,12 @@ const iop_conf_t iop_conf_tab[4][32] = {
 */
 int board_early_init_f (void)
 {
-	volatile t_ep_regs *regs = (t_ep_regs *) CFG_REGS_BASE;
-	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile t_ep_regs *regs = (t_ep_regs *) CONFIG_SYS_REGS_BASE;
+	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
 	volatile memctl8260_t *memctl = &immap->im_memctl;
 
-	memctl->memc_br4 = CFG_BR4_PRELIM;
-	memctl->memc_or4 = CFG_OR4_PRELIM;
+	memctl->memc_br4 = CONFIG_SYS_BR4_PRELIM;
+	memctl->memc_or4 = CONFIG_SYS_OR4_PRELIM;
 	regs->bcsr1 = 0x62;	/* to enable terminal on SMC1 */
 	regs->bcsr2 = 0x30;	/* enable NVRAM and writing FLASH */
 	return 0;
@@ -203,7 +203,7 @@ int board_early_init_f (void)
 
 void reset_phy (void)
 {
-	volatile t_ep_regs *regs = (t_ep_regs *) CFG_REGS_BASE;
+	volatile t_ep_regs *regs = (t_ep_regs *) CONFIG_SYS_REGS_BASE;
 
 	regs->bcsr4 = 0xC0;
 }
@@ -216,7 +216,7 @@ void reset_phy (void)
 
 int checkboard (void)
 {
-	volatile t_ep_regs *regs = (t_ep_regs *) CFG_REGS_BASE;
+	volatile t_ep_regs *regs = (t_ep_regs *) CONFIG_SYS_REGS_BASE;
 	uint major = 0, minor = 0;
 
 	switch (regs->bcsr0) {
@@ -245,18 +245,18 @@ int checkboard (void)
 
 phys_size_t initdram (int board_type)
 {
-	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
 	volatile memctl8260_t *memctl = &immap->im_memctl;
 	volatile uchar c = 0;
-	volatile uchar *ramaddr = (uchar *) (CFG_SDRAM_BASE) + 0x110;
+	volatile uchar *ramaddr = (uchar *) (CONFIG_SYS_SDRAM_BASE) + 0x110;
 
 /*
-	ulong psdmr = CFG_PSDMR;
-#ifdef CFG_LSDRAM
-	ulong lsdmr = CFG_LSDMR;
+	ulong psdmr = CONFIG_SYS_PSDMR;
+#ifdef CONFIG_SYS_LSDRAM
+	ulong lsdmr = CONFIG_SYS_LSDMR;
 #endif
 */
-	long size = CFG_SDRAM0_SIZE;
+	long size = CONFIG_SYS_SDRAM0_SIZE;
 	int i;
 
 
@@ -277,44 +277,44 @@ phys_size_t initdram (int board_type)
 *  accessing the SDRAM with a single-byte transaction."
 *
 * The appropriate BRx/ORx registers have already been set when we
-* get here. The SDRAM can be accessed at the address CFG_SDRAM_BASE.
+* get here. The SDRAM can be accessed at the address CONFIG_SYS_SDRAM_BASE.
 */
 
-	memctl->memc_psrt = CFG_PSRT;
-	memctl->memc_mptpr = CFG_MPTPR;
+	memctl->memc_psrt = CONFIG_SYS_PSRT;
+	memctl->memc_mptpr = CONFIG_SYS_MPTPR;
 
-	memctl->memc_psdmr = (ulong) CFG_PSDMR | PSDMR_OP_PREA;
+	memctl->memc_psdmr = (ulong) CONFIG_SYS_PSDMR | PSDMR_OP_PREA;
 	*ramaddr = c;
 
-	memctl->memc_psdmr = (ulong) CFG_PSDMR | PSDMR_OP_CBRR;
+	memctl->memc_psdmr = (ulong) CONFIG_SYS_PSDMR | PSDMR_OP_CBRR;
 	for (i = 0; i < 8; i++)
 		*ramaddr = c;
 
-	memctl->memc_psdmr = (ulong) CFG_PSDMR | PSDMR_OP_MRW;
+	memctl->memc_psdmr = (ulong) CONFIG_SYS_PSDMR | PSDMR_OP_MRW;
 	*ramaddr = c;
 
-	memctl->memc_psdmr = (ulong) CFG_PSDMR | PSDMR_OP_NORM | PSDMR_RFEN;
+	memctl->memc_psdmr = (ulong) CONFIG_SYS_PSDMR | PSDMR_OP_NORM | PSDMR_RFEN;
 	*ramaddr = c;
 
-#ifndef CFG_RAMBOOT
-#ifdef CFG_LSDRAM
-	size += CFG_SDRAM1_SIZE;
-	ramaddr = (uchar *) (CFG_SDRAM1_BASE) + 0x8c;
-	memctl->memc_lsrt = CFG_LSRT;
+#ifndef CONFIG_SYS_RAMBOOT
+#ifdef CONFIG_SYS_LSDRAM
+	size += CONFIG_SYS_SDRAM1_SIZE;
+	ramaddr = (uchar *) (CONFIG_SYS_SDRAM1_BASE) + 0x8c;
+	memctl->memc_lsrt = CONFIG_SYS_LSRT;
 
-	memctl->memc_lsdmr = (ulong) CFG_LSDMR | PSDMR_OP_PREA;
+	memctl->memc_lsdmr = (ulong) CONFIG_SYS_LSDMR | PSDMR_OP_PREA;
 	*ramaddr = c;
 
-	memctl->memc_lsdmr = (ulong) CFG_LSDMR | PSDMR_OP_CBRR;
+	memctl->memc_lsdmr = (ulong) CONFIG_SYS_LSDMR | PSDMR_OP_CBRR;
 	for (i = 0; i < 8; i++)
 		*ramaddr = c;
 
-	memctl->memc_lsdmr = (ulong) CFG_LSDMR | PSDMR_OP_MRW;
+	memctl->memc_lsdmr = (ulong) CONFIG_SYS_LSDMR | PSDMR_OP_MRW;
 	*ramaddr = c;
 
-	memctl->memc_lsdmr = (ulong) CFG_LSDMR | PSDMR_OP_NORM | PSDMR_RFEN;
+	memctl->memc_lsdmr = (ulong) CONFIG_SYS_LSDMR | PSDMR_OP_NORM | PSDMR_RFEN;
 	*ramaddr = c;
-#endif /* CFG_LSDRAM */
-#endif /* CFG_RAMBOOT */
+#endif /* CONFIG_SYS_LSDRAM */
+#endif /* CONFIG_SYS_RAMBOOT */
 	return (size * 1024 * 1024);
 }
diff --git a/board/ep8260/flash.c b/board/ep8260/flash.c
index 966a34526..2a81de570 100644
--- a/board/ep8260/flash.c
+++ b/board/ep8260/flash.c
@@ -35,7 +35,7 @@
 #define V_BYTE(a)	(*(volatile unsigned char *)( a ))
 
 
-flash_info_t flash_info[CFG_MAX_FLASH_BANKS];
+flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];
 
 
 /*-----------------------------------------------------------------------
@@ -134,13 +134,13 @@ unsigned long flash_init (void)
 	int i;
 
 	/* Init: no FLASHes known */
-	for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) {
+	for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
 		flash_info[i].flash_id = FLASH_UNKNOWN;
 	}
 
 	/* Static FLASH Bank configuration here (only one bank) */
 
-	size_b0 = flash_get_size(CFG_FLASH0_BASE, &flash_info[0]);
+	size_b0 = flash_get_size(CONFIG_SYS_FLASH0_BASE, &flash_info[0]);
 	if (flash_info[0].flash_id == FLASH_UNKNOWN || size_b0 == 0) {
 		printf ("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n",
 			size_b0, size_b0>>20);
@@ -150,20 +150,20 @@ unsigned long flash_init (void)
 	 * protect monitor and environment sectors
 	 */
 
-#if CFG_MONITOR_BASE >= CFG_FLASH0_BASE
+#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH0_BASE
 	flash_protect(FLAG_PROTECT_SET,
-		      CFG_MONITOR_BASE,
-		      CFG_MONITOR_BASE+monitor_flash_len-1,
+		      CONFIG_SYS_MONITOR_BASE,
+		      CONFIG_SYS_MONITOR_BASE+monitor_flash_len-1,
 		      &flash_info[0]);
 #endif
 
-#if (CFG_ENV_IS_IN_FLASH == 1) && defined(CFG_ENV_ADDR)
-# ifndef  CFG_ENV_SIZE
-#  define CFG_ENV_SIZE	CFG_ENV_SECT_SIZE
+#if defined(CONFIG_ENV_IS_IN_FLASH) && defined(CONFIG_ENV_ADDR)
+# ifndef  CONFIG_ENV_SIZE
+#  define CONFIG_ENV_SIZE	CONFIG_ENV_SECT_SIZE
 # endif
 	flash_protect(FLAG_PROTECT_SET,
-		      CFG_ENV_ADDR,
-		      CFG_ENV_ADDR + CFG_ENV_SIZE - 1,
+		      CONFIG_ENV_ADDR,
+		      CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1,
 		      &flash_info[0]);
 #endif
 
@@ -284,7 +284,7 @@ int flash_erase (flash_info_t *info, int s_first, int s_last)
 	while ((V_ULONG( info->start[l_sect] ) & 0x00800080) != 0x00800080 ||
 	       (V_ULONG( info->start[l_sect] + 4 ) & 0x00800080) != 0x00800080)
 	{
-		if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+		if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
 			printf ("Timeout\n");
 			return 1;
 		}
@@ -403,7 +403,7 @@ static int write_dword (flash_info_t *info, ulong dest, unsigned char * pdata)
 	start = get_timer (0);
 	while (((V_ULONG( dest ) & 0x00800080) != (ch & 0x00800080)) ||
 	       ((V_ULONG( dest + 4 ) & 0x00800080) != (cl & 0x00800080))) {
-		if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+		if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
 			return (1);
 		}
 	}
diff --git a/board/ep8260/mii_phy.c b/board/ep8260/mii_phy.c
index 813f020ee..c7aa2755f 100644
--- a/board/ep8260/mii_phy.c
+++ b/board/ep8260/mii_phy.c
@@ -54,7 +54,7 @@ mii_phy_read(unsigned short reg)
 {
     int i;
     unsigned short tmp, val = 0, adr = 0;
-    t_ep_regs *regs = (t_ep_regs*)CFG_REGS_BASE;
+    t_ep_regs *regs = (t_ep_regs*)CONFIG_SYS_REGS_BASE;
 
     tmp = 0x6002 | (adr << 7) | (reg << 2);
     regs->bcsr4 = 0xC3;
@@ -83,7 +83,7 @@ mii_phy_write(unsigned short reg, unsigned short val)
 {
     int i;
     unsigned short tmp, adr = 0;
-    t_ep_regs *regs = (t_ep_regs*)CFG_REGS_BASE;
+    t_ep_regs *regs = (t_ep_regs*)CONFIG_SYS_REGS_BASE;
 
     tmp = 0x5002 | (adr << 7) | (reg << 2);
     regs->bcsr4 = 0xC3;
diff --git a/board/ep82xxm/ep82xxm.c b/board/ep82xxm/ep82xxm.c
index 03baf0b59..c1d6e9100 100644
--- a/board/ep82xxm/ep82xxm.c
+++ b/board/ep82xxm/ep82xxm.c
@@ -39,8 +39,8 @@
  * according to the five values podr/pdir/ppar/psor/pdat for that entry
  */
 
-#define CFG_FCC2 1
-#define CFG_FCC3 1
+#define CONFIG_SYS_FCC2 1
+#define CONFIG_SYS_FCC3 1
 
 const iop_conf_t iop_conf_tab[4][32] = {
 
@@ -82,34 +82,34 @@ const iop_conf_t iop_conf_tab[4][32] = {
 
     /* Port B */
     {	/*	     conf	ppar psor pdir podr pdat */
-	/* PB31 */ { CFG_FCC2,	 1,   0,   1,	0,   0 }, /* FCC2 MII TX_ER  */
-	/* PB30 */ { CFG_FCC2,	 1,   0,   0,	0,   0 }, /* FCC2 MII RX_DV  */
-	/* PB29 */ { CFG_FCC2,	 1,   1,   1,	0,   0 }, /* FCC2 MII TX_EN  */
-	/* PB28 */ { CFG_FCC2,	 1,   0,   0,	0,   0 }, /* FCC2 MII RX_ER  */
-	/* PB27 */ { CFG_FCC2,	 1,   0,   0,	0,   0 }, /* FCC2 MII COL    */
-	/* PB26 */ { CFG_FCC2,	 1,   0,   0,	0,   0 }, /* FCC2 MII CRS    */
-	/* PB25 */ { CFG_FCC2,	 1,   0,   1,	0,   0 }, /* FCC2 MII TxD[3] */
-	/* PB24 */ { CFG_FCC2,	 1,   0,   1,	0,   0 }, /* FCC2 MII TxD[2] */
-	/* PB23 */ { CFG_FCC2,	 1,   0,   1,	0,   0 }, /* FCC2 MII TxD[1] */
-	/* PB22 */ { CFG_FCC2,	 1,   0,   1,	0,   0 }, /* FCC2 MII TxD[0] */
-	/* PB21 */ { CFG_FCC2,	 1,   0,   0,	0,   0 }, /* FCC2 MII RxD[0] */
-	/* PB20 */ { CFG_FCC2,	 1,   0,   0,	0,   0 }, /* FCC2 MII RxD[1] */
-	/* PB19 */ { CFG_FCC2,	 1,   0,   0,	0,   0 }, /* FCC2 MII RxD[2] */
-	/* PB18 */ { CFG_FCC2,	 1,   0,   0,	0,   0 }, /* FCC2 MII RxD[3] */
-	/* PB17 */ { CFG_FCC3,	 1,   0,   0,	0,   0 }, /* FCC3:RX_DIV     */
-	/* PB16 */ { CFG_FCC3,	 1,   0,   0,	0,   0 }, /* FCC3:RX_ERR     */
-	/* PB15 */ { CFG_FCC3,	 1,   0,   1,	0,   0 }, /* FCC3:TX_ERR     */
-	/* PB14 */ { CFG_FCC3,	 1,   0,   1,	0,   0 }, /* FCC3:TX_EN      */
-	/* PB13 */ { CFG_FCC3,	 1,   0,   0,	0,   0 }, /* FCC3:COL	     */
-	/* PB12 */ { CFG_FCC3,	 1,   0,   0,	0,   0 }, /* FCC3:CRS	     */
-	/* PB11 */ { CFG_FCC3,	 1,   0,   0,	0,   0 }, /* FCC3:RXD	     */
-	/* PB10 */ { CFG_FCC3,	 1,   0,   0,	0,   0 }, /* FCC3:RXD	     */
-	/* PB9	*/ { CFG_FCC3,	 1,   0,   0,	0,   0 }, /* FCC3:RXD	     */
-	/* PB8	*/ { CFG_FCC3,	 1,   0,   0,	0,   0 }, /* FCC3:RXD	     */
+	/* PB31 */ { CONFIG_SYS_FCC2,	 1,   0,   1,	0,   0 }, /* FCC2 MII TX_ER  */
+	/* PB30 */ { CONFIG_SYS_FCC2,	 1,   0,   0,	0,   0 }, /* FCC2 MII RX_DV  */
+	/* PB29 */ { CONFIG_SYS_FCC2,	 1,   1,   1,	0,   0 }, /* FCC2 MII TX_EN  */
+	/* PB28 */ { CONFIG_SYS_FCC2,	 1,   0,   0,	0,   0 }, /* FCC2 MII RX_ER  */
+	/* PB27 */ { CONFIG_SYS_FCC2,	 1,   0,   0,	0,   0 }, /* FCC2 MII COL    */
+	/* PB26 */ { CONFIG_SYS_FCC2,	 1,   0,   0,	0,   0 }, /* FCC2 MII CRS    */
+	/* PB25 */ { CONFIG_SYS_FCC2,	 1,   0,   1,	0,   0 }, /* FCC2 MII TxD[3] */
+	/* PB24 */ { CONFIG_SYS_FCC2,	 1,   0,   1,	0,   0 }, /* FCC2 MII TxD[2] */
+	/* PB23 */ { CONFIG_SYS_FCC2,	 1,   0,   1,	0,   0 }, /* FCC2 MII TxD[1] */
+	/* PB22 */ { CONFIG_SYS_FCC2,	 1,   0,   1,	0,   0 }, /* FCC2 MII TxD[0] */
+	/* PB21 */ { CONFIG_SYS_FCC2,	 1,   0,   0,	0,   0 }, /* FCC2 MII RxD[0] */
+	/* PB20 */ { CONFIG_SYS_FCC2,	 1,   0,   0,	0,   0 }, /* FCC2 MII RxD[1] */
+	/* PB19 */ { CONFIG_SYS_FCC2,	 1,   0,   0,	0,   0 }, /* FCC2 MII RxD[2] */
+	/* PB18 */ { CONFIG_SYS_FCC2,	 1,   0,   0,	0,   0 }, /* FCC2 MII RxD[3] */
+	/* PB17 */ { CONFIG_SYS_FCC3,	 1,   0,   0,	0,   0 }, /* FCC3:RX_DIV     */
+	/* PB16 */ { CONFIG_SYS_FCC3,	 1,   0,   0,	0,   0 }, /* FCC3:RX_ERR     */
+	/* PB15 */ { CONFIG_SYS_FCC3,	 1,   0,   1,	0,   0 }, /* FCC3:TX_ERR     */
+	/* PB14 */ { CONFIG_SYS_FCC3,	 1,   0,   1,	0,   0 }, /* FCC3:TX_EN      */
+	/* PB13 */ { CONFIG_SYS_FCC3,	 1,   0,   0,	0,   0 }, /* FCC3:COL	     */
+	/* PB12 */ { CONFIG_SYS_FCC3,	 1,   0,   0,	0,   0 }, /* FCC3:CRS	     */
+	/* PB11 */ { CONFIG_SYS_FCC3,	 1,   0,   0,	0,   0 }, /* FCC3:RXD	     */
+	/* PB10 */ { CONFIG_SYS_FCC3,	 1,   0,   0,	0,   0 }, /* FCC3:RXD	     */
+	/* PB9	*/ { CONFIG_SYS_FCC3,	 1,   0,   0,	0,   0 }, /* FCC3:RXD	     */
+	/* PB8	*/ { CONFIG_SYS_FCC3,	 1,   0,   0,	0,   0 }, /* FCC3:RXD	     */
 	/* PB7	*/ { 0,		 0,   0,   0,	0,   0 }, /* PB7	     */
-	/* PB6	*/ { CFG_FCC3,	 1,   0,   1,	0,   0 }, /* FCC3:TXD	     */
-	/* PB5	*/ { CFG_FCC3,	 1,   0,   1,	0,   0 }, /* FCC3:TXD	     */
-	/* PB4	*/ { CFG_FCC3,	 1,   0,   1,	0,   0 }, /* FCC3:TXD	     */
+	/* PB6	*/ { CONFIG_SYS_FCC3,	 1,   0,   1,	0,   0 }, /* FCC3:TXD	     */
+	/* PB5	*/ { CONFIG_SYS_FCC3,	 1,   0,   1,	0,   0 }, /* FCC3:TXD	     */
+	/* PB4	*/ { CONFIG_SYS_FCC3,	 1,   0,   1,	0,   0 }, /* FCC3:TXD	     */
 	/* PB3	*/ { 0,		 0,   0,   0,	0,   0 }, /* non-existent    */
 	/* PB2	*/ { 0,		 0,   0,   0,	0,   0 }, /* non-existent    */
 	/* PB1	*/ { 0,		 0,   0,   0,	0,   0 }, /* non-existent    */
@@ -122,7 +122,7 @@ const iop_conf_t iop_conf_tab[4][32] = {
 	/* PC30 */ { 0,		 0,   0,   0,	0,   0 }, /* PC30	     */
 	/* PC29 */ { 1,		 1,   1,   0,	0,   0 }, /* SCC1 CTS#	     */
 	/* PC28 */ { 0,		 0,   0,   0,	0,   0 }, /* PC28	     */
-	/* PC27 */ { CFG_FCC3,	 1,   0,   1,	0,   0 }, /* FCC3: TXD[0]    */
+	/* PC27 */ { CONFIG_SYS_FCC3,	 1,   0,   1,	0,   0 }, /* FCC3: TXD[0]    */
 	/* PC26 */ { 0,		 0,   0,   0,	0,   0 }, /* PC26	     */
 	/* PC25 */ { 0,		 0,   0,   0,	0,   0 }, /* PC25	     */
 	/* PC24 */ { 0,		 0,   0,   0,	0,   0 }, /* PC24	     */
@@ -130,10 +130,10 @@ const iop_conf_t iop_conf_tab[4][32] = {
 	/* PC22 */ { 0,		 0,   0,   0,	0,   0 }, /* PC22	     */
 	/* PC21 */ { 0,		 0,   0,   0,	0,   0 }, /* PC21	     */
 	/* PC20 */ { 0,		 0,   0,   0,	0,   0 }, /* PC20	     */
-	/* PC19 */ { CFG_FCC2,	 1,   0,   0,	0,   0 }, /* RxClk (CLK13)   */
-	/* PC18 */ { CFG_FCC2,	 1,   0,   0,	0,   0 }, /* TxClk (CLK14)   */
-	/* PC17 */ { CFG_FCC3,	 1,   0,   0,	0,   0 }, /* RxClk (CLK15)   */
-	/* PC16 */ { CFG_FCC3,	 1,   0,   0,	0,   0 }, /* TxClk (CLK16)   */
+	/* PC19 */ { CONFIG_SYS_FCC2,	 1,   0,   0,	0,   0 }, /* RxClk (CLK13)   */
+	/* PC18 */ { CONFIG_SYS_FCC2,	 1,   0,   0,	0,   0 }, /* TxClk (CLK14)   */
+	/* PC17 */ { CONFIG_SYS_FCC3,	 1,   0,   0,	0,   0 }, /* RxClk (CLK15)   */
+	/* PC16 */ { CONFIG_SYS_FCC3,	 1,   0,   0,	0,   0 }, /* TxClk (CLK16)   */
 	/* PC15 */ { 0,		 0,   0,   0,	0,   0 }, /* PC15	     */
 	/* PC14 */ { 1,		 1,   0,   0,	0,   0 }, /* SCC1 CD#	     */
 	/* PC13 */ { 1,		 1,   0,   0,	0,   0 }, /* SCC2 CTS#	     */
@@ -198,7 +198,7 @@ typedef struct pci_ic_s {
 
 int board_early_init_f (void)
 {
-	vu_char *bcsr = (vu_char *)CFG_BCSR;
+	vu_char *bcsr = (vu_char *)CONFIG_SYS_BCSR;
 
 	bcsr[4] |= 0x30; /* Turn the LEDs off */
 
@@ -209,12 +209,12 @@ int board_early_init_f (void)
 	bcsr[7] |= 0x10;
 #endif
 
-#if CFG_FCC3
+#if CONFIG_SYS_FCC3
 	bcsr[8] |= 0xC0;
-#endif /* CFG_FCC3 */
-#if CFG_FCC2
+#endif /* CONFIG_SYS_FCC3 */
+#if CONFIG_SYS_FCC2
 	bcsr[8] |= 0x30;
-#endif /* CFG_FCC2 */
+#endif /* CONFIG_SYS_FCC2 */
 
 	return 0;
 }
@@ -224,23 +224,23 @@ phys_size_t initdram(int board_type)
 	/* Size in MB of SDRAM populated on board*/
 	long int msize = 256;
 
-#ifndef CFG_RAMBOOT
-	volatile immap_t *immap = (immap_t *)CFG_IMMR;
+#ifndef CONFIG_SYS_RAMBOOT
+	volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR;
 	volatile memctl8260_t *memctl = &immap->im_memctl;
-	uint psdmr = CFG_PSDMR;
+	uint psdmr = CONFIG_SYS_PSDMR;
 	int i;
 
 	unsigned char	ramtmp;
 	unsigned char	*ramptr1 = (unsigned char *)0x00000110;
 
-	memctl->memc_mptpr = CFG_MPTPR;
+	memctl->memc_mptpr = CONFIG_SYS_MPTPR;
 
 udelay(400);
 
 	/* Initialise 60x bus SDRAM */
-	memctl->memc_psrt = CFG_PSRT;
-	memctl->memc_or1  = CFG_SDRAM_OR;
-	memctl->memc_br1  = CFG_SDRAM_BR;
+	memctl->memc_psrt = CONFIG_SYS_PSRT;
+	memctl->memc_or1  = CONFIG_SYS_SDRAM_OR;
+	memctl->memc_br1  = CONFIG_SYS_SDRAM_BR;
 	memctl->memc_psdmr = psdmr;
 
 udelay(400);
@@ -255,7 +255,7 @@ udelay(400);
 	memctl->memc_psdmr = psdmr | PSDMR_OP_MRW;  /* Mode Register write */
 	*ramptr1  = 0xFF;
 	memctl->memc_psdmr = psdmr | PSDMR_RFEN;    /* Refresh enable */
-#endif /* !CFG_RAMBOOT */
+#endif /* !CONFIG_SYS_RAMBOOT */
 
 	/* Return total 60x bus SDRAM size */
 	return msize * 1024 * 1024;
@@ -263,7 +263,7 @@ udelay(400);
 
 int checkboard(void)
 {
-	vu_char *bcsr = (vu_char *)CFG_BCSR;
+	vu_char *bcsr = (vu_char *)CONFIG_SYS_BCSR;
 
 	puts("Board: ");
 	switch (bcsr[0]) {
diff --git a/board/ep88x/ep88x.c b/board/ep88x/ep88x.c
index 92e5f0c12..7e9500737 100644
--- a/board/ep88x/ep88x.c
+++ b/board/ep88x/ep88x.c
@@ -63,7 +63,7 @@ static uint sdram_table[] = {
 
 int board_early_init_f (void)
 {
-	vu_char *bcsr = (vu_char *)CFG_BCSR;
+	vu_char *bcsr = (vu_char *)CONFIG_SYS_BCSR;
 
 	bcsr[0] |= 0x0C; /* Turn the LEDs off */
 	bcsr[2] |= 0x08; /* Enable flash WE# line - necessary for
@@ -89,7 +89,7 @@ int board_early_init_f (void)
 phys_size_t initdram (int board_type)
 {
 	long int msize;
-	volatile immap_t     *immap  = (volatile immap_t *)CFG_IMMR;
+	volatile immap_t     *immap  = (volatile immap_t *)CONFIG_SYS_IMMR;
 	volatile memctl8xx_t *memctl = &immap->im_memctl;
 
 	upmconfig(UPMA, sdram_table, sizeof(sdram_table) / sizeof(uint));
@@ -97,7 +97,7 @@ phys_size_t initdram (int board_type)
 	/* Configure SDRAM refresh */
 	memctl->memc_mptpr = MPTPR_PTP_DIV2; /* BRGCLK/2 */
 
-	memctl->memc_mamr = (65 << 24) | CFG_MAMR; /* No refresh */
+	memctl->memc_mamr = (65 << 24) | CONFIG_SYS_MAMR; /* No refresh */
 	udelay(100);
 
 	/* Run MRS pattern from location 0x36 */
@@ -106,10 +106,10 @@ phys_size_t initdram (int board_type)
 	udelay(100);
 
 	memctl->memc_mamr |=  MAMR_PTAE; /* Enable refresh */
-	memctl->memc_or1   = ~(CFG_SDRAM_MAX_SIZE - 1) | OR_CSNT_SAM;
-	memctl->memc_br1   =  CFG_SDRAM_BASE | BR_PS_32 | BR_MS_UPMA | BR_V;
+	memctl->memc_or1   = ~(CONFIG_SYS_SDRAM_MAX_SIZE - 1) | OR_CSNT_SAM;
+	memctl->memc_br1   =  CONFIG_SYS_SDRAM_BASE | BR_PS_32 | BR_MS_UPMA | BR_V;
 
-	msize = get_ram_size(CFG_SDRAM_BASE, CFG_SDRAM_MAX_SIZE);
+	msize = get_ram_size(CONFIG_SYS_SDRAM_BASE, CONFIG_SYS_SDRAM_MAX_SIZE);
 	memctl->memc_or1  |= ~(msize - 1);
 
 	return msize;
@@ -117,7 +117,7 @@ phys_size_t initdram (int board_type)
 
 int checkboard( void )
 {
-	vu_char *bcsr = (vu_char *)CFG_BCSR;
+	vu_char *bcsr = (vu_char *)CONFIG_SYS_BCSR;
 
 	puts("Board: ");
 	switch (bcsr[15]) {
diff --git a/board/ep88x/u-boot.lds b/board/ep88x/u-boot.lds
index 354514233..1b6e417be 100644
--- a/board/ep88x/u-boot.lds
+++ b/board/ep88x/u-boot.lds
@@ -115,6 +115,7 @@ SECTIONS
    *(.dynbss)
    *(.bss)
    *(COMMON)
+   . = ALIGN(4);
   }
   _end = . ;
   PROVIDE (end = .);
diff --git a/board/eric/eric.c b/board/eric/eric.c
index 972d485b5..600b9d7a7 100644
--- a/board/eric/eric.c
+++ b/board/eric/eric.c
@@ -142,7 +142,7 @@ phys_size_t initdram (int board_type)
 	 * so let init.S do the init job for SDRAM
 	 * and simply return 32MByte here
 	 */
-	return (CFG_SDRAM_SIZE * 1024 * 1024);
+	return (CONFIG_SYS_SDRAM_SIZE * 1024 * 1024);
 #else
 
 	/* Read Serial Presence Detect Information */
diff --git a/board/eric/flash.c b/board/eric/flash.c
index 2c7d2a08c..7e57513ae 100644
--- a/board/eric/flash.c
+++ b/board/eric/flash.c
@@ -25,10 +25,10 @@
 #include <ppc4xx.h>
 #include <asm/processor.h>
 
-flash_info_t	flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips	*/
+flash_info_t	flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips	*/
 
 
-#ifdef CFG_FLASH_16BIT
+#ifdef CONFIG_SYS_FLASH_16BIT
 #define FLASH_WORD_SIZE	unsigned short
 #define	FLASH_ID_MASK	0xFFFF
 #else
@@ -42,7 +42,7 @@ flash_info_t	flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips	*/
 /* stolen from esteem192e/flash.c */
 ulong flash_get_size (volatile FLASH_WORD_SIZE *addr, flash_info_t *info);
 
-#ifndef CFG_FLASH_16BIT
+#ifndef CONFIG_SYS_FLASH_16BIT
 static int write_word (flash_info_t *info, ulong dest, ulong data);
 #else
 static int write_short (flash_info_t *info, ulong dest, ushort data);
@@ -61,7 +61,7 @@ unsigned long flash_init (void)
 	unsigned long base_b0, base_b1;
 
 	/* Init: no FLASHes known */
-	for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) {
+	for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
 		flash_info[i].flash_id = FLASH_UNKNOWN;
 	}
 
@@ -75,7 +75,7 @@ unsigned long flash_init (void)
 	}
 
 	/* Only one bank */
-	if (CFG_MAX_FLASH_BANKS == 1)
+	if (CONFIG_SYS_MAX_FLASH_BANKS == 1)
 	  {
 	    /* Setup offsets */
 	    flash_get_offsets (FLASH_BASE0_PRELIM, &flash_info[0]);
@@ -88,8 +88,8 @@ unsigned long flash_init (void)
 				&flash_info[0]);
 #else
 	    (void)flash_protect(FLAG_PROTECT_SET,
-				CFG_MONITOR_BASE,
-				CFG_MONITOR_BASE+monitor_flash_len-1,
+				CONFIG_SYS_MONITOR_BASE,
+				CONFIG_SYS_MONITOR_BASE+monitor_flash_len-1,
 				&flash_info[0]);
 #endif
 	    size_b1 = 0 ;
@@ -137,8 +137,8 @@ unsigned long flash_init (void)
 				&flash_info[0]);
 #else
 	    (void)flash_protect(FLAG_PROTECT_SET,
-				CFG_MONITOR_BASE,
-				CFG_MONITOR_BASE+monitor_flash_len-1,
+				CONFIG_SYS_MONITOR_BASE,
+				CONFIG_SYS_MONITOR_BASE+monitor_flash_len-1,
 				&flash_info[0]);
 #endif
 
@@ -187,7 +187,7 @@ static void flash_get_offsets (ulong base, flash_info_t *info)
 	} else if (info->flash_id & FLASH_BTYPE) {
 	     if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL) {
 
-#ifndef CFG_FLASH_16BIT
+#ifndef CONFIG_SYS_FLASH_16BIT
 		/* set sector offsets for bottom boot block type	*/
 		info->start[0] = base + 0x00000000;
 		info->start[1] = base + 0x00004000;
@@ -241,7 +241,7 @@ static void flash_get_offsets (ulong base, flash_info_t *info)
 		i = info->sector_count - 1;
 	     if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL) {
 
-#ifndef CFG_FLASH_16BIT
+#ifndef CONFIG_SYS_FLASH_16BIT
 		info->start[i--] = base + info->size - 0x00004000;
 		info->start[i--] = base + info->size - 0x00008000;
 		info->start[i--] = base + info->size - 0x0000C000;
@@ -403,7 +403,7 @@ ulong flash_get_size (volatile FLASH_WORD_SIZE *addr, flash_info_t *info)
 	/* Write auto select command: read Manufacturer ID */
 
 
-#ifndef CFG_FLASH_16BIT
+#ifndef CONFIG_SYS_FLASH_16BIT
 
 	/*
 	 * Note: if it is an AMD flash and the word at addr[0000]
@@ -654,7 +654,7 @@ int	flash_erase (flash_info_t *info, int s_first, int s_last)
 	/* Disable interrupts which might cause a timeout here */
 	flag = disable_interrupts();
     if(info->flash_id < FLASH_AMD_COMP) {
-#ifndef CFG_FLASH_16BIT
+#ifndef CONFIG_SYS_FLASH_16BIT
 	addr[0x0555] = 0x00AA00AA;
 	addr[0x02AA] = 0x00550055;
 	addr[0x0555] = 0x00800080;
@@ -695,7 +695,7 @@ int	flash_erase (flash_info_t *info, int s_first, int s_last)
 	while ((addr[0] & (0x00800080&FLASH_ID_MASK)) !=
 			  (0x00800080&FLASH_ID_MASK)  )
 	{
-		if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+		if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
 			printf ("Timeout\n");
 			return 1;
 		}
@@ -716,7 +716,7 @@ DONE:
 	for (sect = s_first; sect<=s_last; sect++) {
 		if (info->protect[sect] == 0) {	/* not protected */
 			barf = 0;
-#ifndef CFG_FLASH_16BIT
+#ifndef CONFIG_SYS_FLASH_16BIT
 			addr = (vu_long*)(info->start[sect]);
 			addr[0] = 0x00200020;
 			addr[0] = 0x00D000D0;
@@ -767,7 +767,7 @@ DONE:
 	flash_info_t *info;
 	int i;
 
-	for (i=0, info=&flash_info[0]; i<CFG_MAX_FLASH_BANKS; ++i, ++info) {
+	for (i=0, info=&flash_info[0]; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i, ++info) {
 		if ((addr >= info->start[0]) &&
 		    (addr < (info->start[0] + info->size)) ) {
 			return (info);
@@ -844,7 +844,7 @@ DONE:
 
 int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
 {
-#ifndef CFG_FLASH_16BIT
+#ifndef CONFIG_SYS_FLASH_16BIT
 	ulong cp, wp, data;
 	int l;
 #else
@@ -853,7 +853,7 @@ int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
 #endif
 	int i, rc;
 
-#ifndef CFG_FLASH_16BIT
+#ifndef CONFIG_SYS_FLASH_16BIT
 
 
 	wp = (addr & ~3);	/* get lower word aligned address */
@@ -980,7 +980,7 @@ int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
  * 1 - write timeout
  * 2 - Flash not erased
  */
-#ifndef CFG_FLASH_16BIT
+#ifndef CONFIG_SYS_FLASH_16BIT
 static int write_word (flash_info_t * info, ulong dest, ulong data)
 {
 	vu_long *addr = (vu_long *) (info->start[0]);
@@ -1018,7 +1018,7 @@ static int write_word (flash_info_t * info, ulong dest, ulong data)
 
 		while ((*((vu_long *) dest) & 0x00800080) !=
 		       (data & 0x00800080)) {
-			if (get_timer (start) > CFG_FLASH_WRITE_TOUT) {
+			if (get_timer (start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
 				return (1);
 			}
 		}
@@ -1026,7 +1026,7 @@ static int write_word (flash_info_t * info, ulong dest, ulong data)
 	} else {
 
 		while (!(addr[0] & 0x00800080)) {	/* wait for error or finish */
-			if (get_timer (start) > CFG_FLASH_WRITE_TOUT) {
+			if (get_timer (start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
 				return (1);
 			}
 
@@ -1093,7 +1093,7 @@ static int write_short (flash_info_t * info, ulong dest, ushort data)
 	if (info->flash_id < FLASH_AMD_COMP) {
 		/* AMD stuff */
 		while ((*((vu_short *) dest) & 0x0080) != (data & 0x0080)) {
-			if (get_timer (start) > CFG_FLASH_WRITE_TOUT) {
+			if (get_timer (start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
 				return (1);
 			}
 		}
@@ -1101,7 +1101,7 @@ static int write_short (flash_info_t * info, ulong dest, ushort data)
 	} else {
 		/* intel stuff */
 		while (!(addr[0] & 0x0080)) {	/* wait for error or finish */
-			if (get_timer (start) > CFG_FLASH_WRITE_TOUT)
+			if (get_timer (start) > CONFIG_SYS_FLASH_WRITE_TOUT)
 				return (1);
 		}
 
@@ -1120,7 +1120,7 @@ static int write_short (flash_info_t * info, ulong dest, ushort data)
 		*addr = 0x00B0;
 		*addr = 0x0070;
 		while (!(addr[0] & 0x0080)) {	/* wait for error or finish */
-			if (get_timer (start) > CFG_FLASH_WRITE_TOUT)
+			if (get_timer (start) > CONFIG_SYS_FLASH_WRITE_TOUT)
 				return (1);
 		}
 		*addr = 0x00FF;
diff --git a/board/eric/init.S b/board/eric/init.S
index 9d4e7ff48..2304cc7bb 100644
--- a/board/eric/init.S
+++ b/board/eric/init.S
@@ -219,7 +219,7 @@ sdram_init:
 
 	mflr	r31
 
-#ifdef CFG_SDRAM_MANUALLY
+#ifdef CONFIG_SYS_SDRAM_MANUALLY
 	/*------------------------------------------------------------------- */
 	/* Set MB0CF for bank 0. (0-32MB) Address Mode 4 since 12x8(2) */
 	/*------------------------------------------------------------------- */
diff --git a/board/eric/u-boot.lds b/board/eric/u-boot.lds
index 00e35a6b8..bf46e1842 100644
--- a/board/eric/u-boot.lds
+++ b/board/eric/u-boot.lds
@@ -68,14 +68,14 @@ SECTIONS
     cpu/ppc4xx/4xx_uart.o	(.text)
     cpu/ppc4xx/cpu_init.o	(.text)
     cpu/ppc4xx/speed.o	(.text)
-    cpu/ppc4xx/4xx_enet.o	(.text)
+    drivers/net/4xx_enet.o	(.text)
     common/dlmalloc.o	(.text)
     lib_generic/crc32.o		(.text)
     lib_ppc/extable.o	(.text)
     lib_generic/zlib.o		(.text)
 
 /*    . = env_offset;*/
-    common/environment.o(.text)
+    common/env_embedded.o(.text)
 
     *(.text)
     *(.fixup)
@@ -146,6 +146,7 @@ SECTIONS
    *(.dynbss)
    *(.bss)
    *(COMMON)
+   . = ALIGN(4);
   }
   _end = . ;
   PROVIDE (end = .);
diff --git a/board/esd/adciop/adciop.c b/board/esd/adciop/adciop.c
index 0f655b78a..63aaf2c7a 100644
--- a/board/esd/adciop/adciop.c
+++ b/board/esd/adciop/adciop.c
@@ -22,6 +22,7 @@
  */
 
 #include <common.h>
+#include <netdev.h>
 #include "adciop.h"
 
 /* ------------------------------------------------------------------------- */
@@ -95,3 +96,8 @@ int testdram (void)
 }
 
 /* ------------------------------------------------------------------------- */
+
+int board_eth_init(bd_t *bis)
+{
+	return pci_eth_init(bis);
+}
diff --git a/board/esd/adciop/flash.c b/board/esd/adciop/flash.c
index d9eccba1e..dd578c893 100644
--- a/board/esd/adciop/flash.c
+++ b/board/esd/adciop/flash.c
@@ -45,7 +45,7 @@ unsigned long flash_init (void)
 	int i;
 
 	/* Init: no FLASHes known */
-	for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) {
+	for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
 		flash_info[i].flash_id = FLASH_UNKNOWN;
 	}
 
diff --git a/board/esd/adciop/u-boot.lds b/board/esd/adciop/u-boot.lds
index db65fe69b..e91816373 100644
--- a/board/esd/adciop/u-boot.lds
+++ b/board/esd/adciop/u-boot.lds
@@ -132,6 +132,7 @@ SECTIONS
    *(.dynbss)
    *(.bss)
    *(COMMON)
+   . = ALIGN(4);
   }
   _end = . ;
   PROVIDE (end = .);
diff --git a/board/esd/apc405/apc405.c b/board/esd/apc405/apc405.c
index 83657c8d5..ac9bbb3f4 100644
--- a/board/esd/apc405/apc405.c
+++ b/board/esd/apc405/apc405.c
@@ -41,7 +41,7 @@ extern int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
 extern void lxt971_no_sleep(void);
 extern ulong flash_get_size (ulong base, int banknum);
 
-int flash_banks = CFG_MAX_FLASH_BANKS_DETECT;
+int flash_banks = CONFIG_SYS_MAX_FLASH_BANKS_DETECT;
 
 /* fpga configuration data - gzip compressed and generated by bin2c */
 const unsigned char fpgadata[] =
@@ -140,7 +140,7 @@ int board_early_init_f (void)
 	 * First pull fpga-prg pin low, to disable fpga logic
 	 */
 	out_be32((void*)GPIO0_ODR, 0x00000000);        /* no open drain pins */
-	out_be32((void*)GPIO0_TCR, CFG_FPGA_PRG);      /* setup for output   */
+	out_be32((void*)GPIO0_TCR, CONFIG_SYS_FPGA_PRG);      /* setup for output   */
 	out_be32((void*)GPIO0_OR, 0);                  /* pull prg low       */
 
 	/*
@@ -178,8 +178,8 @@ int board_early_init_f (void)
 		mtebc(pb1cr, 0);
 
 		/* resize CS0 to 32MB */
-		mtebc(pb0ap, CFG_EBC_PB0AP_HWREV8);
-		mtebc(pb0cr, CFG_EBC_PB0CR_HWREV8);
+		mtebc(pb0ap, CONFIG_SYS_EBC_PB0AP_HWREV8);
+		mtebc(pb0cr, CONFIG_SYS_EBC_PB0CR_HWREV8);
 	}
 
 	return 0;
@@ -200,8 +200,8 @@ int board_early_init_r(void)
 
 int misc_init_r(void)
 {
-	u16 *fpga_mode = (u16 *)(CFG_FPGA_BASE_ADDR + CFG_FPGA_CTRL);
-	u16 *fpga_ctrl2 =(u16 *)(CFG_FPGA_BASE_ADDR + CFG_FPGA_CTRL2);
+	u16 *fpga_mode = (u16 *)(CONFIG_SYS_FPGA_BASE_ADDR + CONFIG_SYS_FPGA_CTRL);
+	u16 *fpga_ctrl2 =(u16 *)(CONFIG_SYS_FPGA_BASE_ADDR + CONFIG_SYS_FPGA_CTRL2);
 	u8 *duart0_mcr = (u8 *)(DUART0_BA + 4);
 	u8 *duart1_mcr = (u8 *)(DUART1_BA + 4);
 	unsigned char *dst;
@@ -222,8 +222,8 @@ int misc_init_r(void)
 	cntrl0Reg = mfdcr(cntrl0);
 	mtdcr(cntrl0, cntrl0Reg | 0x00300000);
 
-	dst = malloc(CFG_FPGA_MAX_SIZE);
-	if (gunzip(dst, CFG_FPGA_MAX_SIZE, (uchar *)fpgadata, &len) != 0) {
+	dst = malloc(CONFIG_SYS_FPGA_MAX_SIZE);
+	if (gunzip(dst, CONFIG_SYS_FPGA_MAX_SIZE, (uchar *)fpgadata, &len) != 0) {
 		printf("GUNZIP ERROR - must RESET board to recover\n");
 		do_reset(NULL, 0, 0, NULL);
 	}
@@ -297,11 +297,11 @@ int misc_init_r(void)
 	/*
 	 * Enable power on PS/2 interface (with reset)
 	 */
-	out_be16(fpga_mode, in_be16(fpga_mode) | CFG_FPGA_CTRL_PS2_RESET);
+	out_be16(fpga_mode, in_be16(fpga_mode) | CONFIG_SYS_FPGA_CTRL_PS2_RESET);
 	for (i=0;i<100;i++)
 		udelay(1000);
 	udelay(1000);
-	out_be16(fpga_mode, in_be16(fpga_mode) & ~CFG_FPGA_CTRL_PS2_RESET);
+	out_be16(fpga_mode, in_be16(fpga_mode) & ~CONFIG_SYS_FPGA_CTRL_PS2_RESET);
 
 	/*
 	 * Enable interrupts in exar duart mcr[3]
@@ -315,15 +315,15 @@ int misc_init_r(void)
 	str = getenv("splashimage");
 	if (str) {
 		logo_addr = (uchar *)simple_strtoul(str, NULL, 16);
-		logo_size = CFG_VIDEO_LOGO_MAX_SIZE;
+		logo_size = CONFIG_SYS_VIDEO_LOGO_MAX_SIZE;
 	} else {
 		logo_addr = logo_bmp;
 		logo_size = sizeof(logo_bmp);
 	}
 
 	if (gd->board_type >= 6) {
-		result = lcd_init((uchar *)CFG_LCD_BIG_REG,
-				  (uchar *)CFG_LCD_BIG_MEM,
+		result = lcd_init((uchar *)CONFIG_SYS_LCD_BIG_REG,
+				  (uchar *)CONFIG_SYS_LCD_BIG_MEM,
 				  regs_13505_640_480_16bpp,
 				  sizeof(regs_13505_640_480_16bpp) /
 				  sizeof(regs_13505_640_480_16bpp[0]),
@@ -332,16 +332,16 @@ int misc_init_r(void)
 			/* retry with internal image */
 			logo_addr = logo_bmp;
 			logo_size = sizeof(logo_bmp);
-			lcd_init((uchar *)CFG_LCD_BIG_REG,
-				 (uchar *)CFG_LCD_BIG_MEM,
+			lcd_init((uchar *)CONFIG_SYS_LCD_BIG_REG,
+				 (uchar *)CONFIG_SYS_LCD_BIG_MEM,
 				 regs_13505_640_480_16bpp,
 				 sizeof(regs_13505_640_480_16bpp) /
 				 sizeof(regs_13505_640_480_16bpp[0]),
 				 logo_addr, logo_size);
 		}
 	} else {
-		result = lcd_init((uchar *)CFG_LCD_BIG_REG,
-				  (uchar *)CFG_LCD_BIG_MEM,
+		result = lcd_init((uchar *)CONFIG_SYS_LCD_BIG_REG,
+				  (uchar *)CONFIG_SYS_LCD_BIG_MEM,
 				  regs_13806_640_480_16bpp,
 				  sizeof(regs_13806_640_480_16bpp) /
 				  sizeof(regs_13806_640_480_16bpp[0]),
@@ -350,8 +350,8 @@ int misc_init_r(void)
 			/* retry with internal image */
 			logo_addr = logo_bmp;
 			logo_size = sizeof(logo_bmp);
-			lcd_init((uchar *)CFG_LCD_BIG_REG,
-				 (uchar *)CFG_LCD_BIG_MEM,
+			lcd_init((uchar *)CONFIG_SYS_LCD_BIG_REG,
+				 (uchar *)CONFIG_SYS_LCD_BIG_MEM,
 				 regs_13806_640_480_16bpp,
 				 sizeof(regs_13806_640_480_16bpp) /
 				 sizeof(regs_13806_640_480_16bpp[0]),
@@ -389,12 +389,12 @@ int misc_init_r(void)
 	 * fix environment for field updated units
 	 */
 	if (getenv("altbootcmd") == NULL) {
-		setenv("usb_load", CFG_USB_LOAD_COMMAND);
-		setenv("usbargs", CFG_USB_ARGS);
+		setenv("usb_load", CONFIG_SYS_USB_LOAD_COMMAND);
+		setenv("usbargs", CONFIG_SYS_USB_ARGS);
 		setenv("bootcmd", CONFIG_BOOTCOMMAND);
-		setenv("usb_self", CFG_USB_SELF_COMMAND);
-		setenv("bootlimit", CFG_BOOTLIMIT);
-		setenv("altbootcmd", CFG_ALT_BOOTCOMMAND);
+		setenv("usb_self", CONFIG_SYS_USB_SELF_COMMAND);
+		setenv("bootlimit", CONFIG_SYS_BOOTLIMIT);
+		setenv("altbootcmd", CONFIG_SYS_ALT_BOOTCOMMAND);
 		saveenv();
 	}
 
@@ -423,30 +423,20 @@ int checkboard (void)
 	return 0;
 }
 
-phys_size_t initdram (int board_type)
-{
-	unsigned long val;
-
-	mtdcr(memcfga, mem_mb0cf);
-	val = mfdcr(memcfgd);
-
-	return (4*1024*1024 << ((val & 0x000e0000) >> 17));
-}
-
 #ifdef CONFIG_IDE_RESET
 void ide_set_reset(int on)
 {
-	u16 *fpga_mode = (u16 *)(CFG_FPGA_BASE_ADDR + CFG_FPGA_CTRL);
+	u16 *fpga_mode = (u16 *)(CONFIG_SYS_FPGA_BASE_ADDR + CONFIG_SYS_FPGA_CTRL);
 
 	/*
 	 * Assert or deassert CompactFlash Reset Pin
 	 */
 	if (on) {
 		out_be16(fpga_mode,
-			 in_be16(fpga_mode) & ~CFG_FPGA_CTRL_CF_RESET);
+			 in_be16(fpga_mode) & ~CONFIG_SYS_FPGA_CTRL_CF_RESET);
 	} else {
 		out_be16(fpga_mode,
-			 in_be16(fpga_mode) | CFG_FPGA_CTRL_CF_RESET);
+			 in_be16(fpga_mode) | CONFIG_SYS_FPGA_CTRL_CF_RESET);
 	}
 }
 #endif /* CONFIG_IDE_RESET */
@@ -459,7 +449,7 @@ void reset_phy(void)
 	lxt971_no_sleep();
 }
 
-#if defined(CONFIG_USB_OHCI_NEW) && defined(CFG_USB_OHCI_BOARD_INIT)
+#if defined(CONFIG_USB_OHCI_NEW) && defined(CONFIG_SYS_USB_OHCI_BOARD_INIT)
 int usb_board_init(void)
 {
 	return 0;
@@ -490,4 +480,4 @@ int usb_board_init_fail(void)
 	usb_board_stop();
 	return 0;
 }
-#endif /* defined(CONFIG_USB_OHCI) && defined(CFG_USB_OHCI_BOARD_INIT) */
+#endif /* defined(CONFIG_USB_OHCI) && defined(CONFIG_SYS_USB_OHCI_BOARD_INIT) */
diff --git a/board/esd/apc405/u-boot.lds b/board/esd/apc405/u-boot.lds
index 21547ac27..9697cc6b3 100644
--- a/board/esd/apc405/u-boot.lds
+++ b/board/esd/apc405/u-boot.lds
@@ -72,7 +72,7 @@ SECTIONS
     lib_generic/zlib.o		(.text)
 
 /*    . = env_offset;*/
-/*    common/environment.o(.text)*/
+/*    common/env_embedded.o(.text)*/
 
     *(.text)
     *(.fixup)
@@ -143,6 +143,7 @@ SECTIONS
    *(.dynbss)
    *(.bss)
    *(COMMON)
+   . = ALIGN(4);
   }
   _end = . ;
   PROVIDE (end = .);
diff --git a/board/esd/ar405/flash.c b/board/esd/ar405/flash.c
index 89af1190a..274ada9fe 100644
--- a/board/esd/ar405/flash.c
+++ b/board/esd/ar405/flash.c
@@ -48,7 +48,7 @@ unsigned long flash_init (void)
 	int size_val = 0;
 
 	/* Init: no FLASHes known */
-	for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) {
+	for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
 		flash_info[i].flash_id = FLASH_UNKNOWN;
 	}
 
@@ -91,7 +91,7 @@ unsigned long flash_init (void)
 
 	/* Monitor protection ON by default */
 	(void)flash_protect(FLAG_PROTECT_SET,
-			    -CFG_MONITOR_LEN,
+			    -CONFIG_SYS_MONITOR_LEN,
 			    0xffffffff,
 			    &flash_info[0]);
 
diff --git a/board/esd/ar405/u-boot.lds b/board/esd/ar405/u-boot.lds
index b072bbb3e..2c1cf9206 100644
--- a/board/esd/ar405/u-boot.lds
+++ b/board/esd/ar405/u-boot.lds
@@ -66,7 +66,7 @@ SECTIONS
     cpu/ppc4xx/4xx_uart.o		(.text)
     cpu/ppc4xx/cpu_init.o	(.text)
     cpu/ppc4xx/speed.o		(.text)
-    cpu/ppc4xx/4xx_enet.o	(.text)
+    drivers/net/4xx_enet.o	(.text)
     common/dlmalloc.o		(.text)
     lib_generic/crc32.o		(.text)
     lib_ppc/extable.o		(.text)
@@ -79,14 +79,13 @@ SECTIONS
     common/cmd_mem.o		(.text)
     common/cmd_nvedit.o		(.text)
     common/console.o		(.text)
-    common/lists.o		(.text)
     common/main.o		(.text)
 
 /*
     . = DEFINED(env_offset) ? env_offset : .;
-    common/environment.o	(.ppcenv)
+    common/env_embedded.o	(.ppcenv)
 */
-    common/environment.o	(.text)
+    common/env_embedded.o	(.text)
 
     *(.text)
     *(.fixup)
@@ -157,6 +156,7 @@ SECTIONS
    *(.dynbss)
    *(.bss)
    *(COMMON)
+   . = ALIGN(4);
   }
   _end = . ;
   PROVIDE (end = .);
diff --git a/board/esd/ash405/ash405.c b/board/esd/ash405/ash405.c
index 25360a656..dd1e2ec2e 100644
--- a/board/esd/ash405/ash405.c
+++ b/board/esd/ash405/ash405.c
@@ -82,15 +82,6 @@ int board_early_init_f (void)
 	return 0;
 }
 
-
-/* ------------------------------------------------------------------------- */
-
-int misc_init_f (void)
-{
-	return 0;  /* dummy implementation */
-}
-
-
 int misc_init_r (void)
 {
 	volatile unsigned char *duart0_mcr = (unsigned char *)((ulong)DUART0_BA + 4);
@@ -103,8 +94,8 @@ int misc_init_r (void)
 	int index;
 	int i;
 
-	dst = malloc(CFG_FPGA_MAX_SIZE);
-	if (gunzip (dst, CFG_FPGA_MAX_SIZE, (uchar *)fpgadata, &len) != 0) {
+	dst = malloc(CONFIG_SYS_FPGA_MAX_SIZE);
+	if (gunzip (dst, CONFIG_SYS_FPGA_MAX_SIZE, (uchar *)fpgadata, &len) != 0) {
 		printf ("GUNZIP ERROR - must RESET board to recover\n");
 		do_reset (NULL, 0, 0, NULL);
 	}
@@ -166,9 +157,9 @@ int misc_init_r (void)
 	/*
 	 * Reset external DUARTs
 	 */
-	out_be32((void *)GPIO0_OR, in_be32((void *)GPIO0_OR) | CFG_DUART_RST);
+	out_be32((void *)GPIO0_OR, in_be32((void *)GPIO0_OR) | CONFIG_SYS_DUART_RST);
 	udelay(10); /* wait 10us */
-	out_be32((void *)GPIO0_OR, in_be32((void *)GPIO0_OR) & ~CFG_DUART_RST);
+	out_be32((void *)GPIO0_OR, in_be32((void *)GPIO0_OR) & ~CONFIG_SYS_DUART_RST);
 	udelay(1000); /* wait 1ms */
 
 	/*
@@ -205,20 +196,6 @@ int checkboard (void)
 	return 0;
 }
 
-/* ------------------------------------------------------------------------- */
-
-phys_size_t initdram (int board_type)
-{
-	unsigned long val;
-
-	mtdcr(memcfga, mem_mb0cf);
-	val = mfdcr(memcfgd);
-
-	return (4*1024*1024 << ((val & 0x000e0000) >> 17));
-}
-
-/* ------------------------------------------------------------------------- */
-
 void reset_phy(void)
 {
 #ifdef CONFIG_LXT971_NO_SLEEP
diff --git a/board/esd/ash405/flash.c b/board/esd/ash405/flash.c
index 89af1190a..274ada9fe 100644
--- a/board/esd/ash405/flash.c
+++ b/board/esd/ash405/flash.c
@@ -48,7 +48,7 @@ unsigned long flash_init (void)
 	int size_val = 0;
 
 	/* Init: no FLASHes known */
-	for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) {
+	for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
 		flash_info[i].flash_id = FLASH_UNKNOWN;
 	}
 
@@ -91,7 +91,7 @@ unsigned long flash_init (void)
 
 	/* Monitor protection ON by default */
 	(void)flash_protect(FLAG_PROTECT_SET,
-			    -CFG_MONITOR_LEN,
+			    -CONFIG_SYS_MONITOR_LEN,
 			    0xffffffff,
 			    &flash_info[0]);
 
diff --git a/board/esd/ash405/u-boot.lds b/board/esd/ash405/u-boot.lds
index 644174a46..e2e2512e7 100644
--- a/board/esd/ash405/u-boot.lds
+++ b/board/esd/ash405/u-boot.lds
@@ -72,7 +72,7 @@ SECTIONS
     lib_generic/zlib.o		(.text)
 
 /*    . = env_offset;*/
-/*    common/environment.o(.text)*/
+/*    common/env_embedded.o(.text)*/
 
     *(.text)
     *(.fixup)
@@ -142,6 +142,7 @@ SECTIONS
    *(.dynbss)
    *(.bss)
    *(COMMON)
+   . = ALIGN(4);
   }
   _end = . ;
   PROVIDE (end = .);
diff --git a/board/esd/canbt/flash.c b/board/esd/canbt/flash.c
index de847f9be..56c822ec9 100644
--- a/board/esd/canbt/flash.c
+++ b/board/esd/canbt/flash.c
@@ -47,7 +47,7 @@ unsigned long flash_init (void)
 	unsigned long base_b0;
 
 	/* Init: no FLASHes known */
-	for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) {
+	for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
 		flash_info[i].flash_id = FLASH_UNKNOWN;
 	}
 
diff --git a/board/esd/canbt/u-boot.lds b/board/esd/canbt/u-boot.lds
index e66db5d23..74280e61d 100644
--- a/board/esd/canbt/u-boot.lds
+++ b/board/esd/canbt/u-boot.lds
@@ -78,12 +78,11 @@ SECTIONS
     common/cmd_mem.o		(.text)
     common/cmd_nvedit.o		(.text)
     common/console.o		(.text)
-    common/lists.o		(.text)
     common/main.o		(.text)
     net/net.o			(.text)
 
 /*    . = env_offset;
-    common/environment.o	(.text)
+    common/env_embedded.o	(.text)
 */
 
     *(.text)
@@ -155,6 +154,7 @@ SECTIONS
    *(.dynbss)
    *(.bss)
    *(COMMON)
+   . = ALIGN(4);
   }
   _end = . ;
   PROVIDE (end = .);
diff --git a/board/esd/cms700/cms700.c b/board/esd/cms700/cms700.c
index ba27c030b..5709d4504 100644
--- a/board/esd/cms700/cms700.c
+++ b/board/esd/cms700/cms700.c
@@ -69,23 +69,14 @@ int board_early_init_f (void)
 	/*
 	 * Reset CPLD via GPIO12 (CS3) pin
 	 */
-	out_be32((void *)GPIO0_OR, in_be32((void *)GPIO0_OR) & ~CFG_PLD_RESET);
+	out_be32((void *)GPIO0_OR, in_be32((void *)GPIO0_OR) & ~CONFIG_SYS_PLD_RESET);
 	udelay(1000); /* wait 1ms */
-	out_be32((void *)GPIO0_OR, in_be32((void *)GPIO0_OR) | CFG_PLD_RESET);
+	out_be32((void *)GPIO0_OR, in_be32((void *)GPIO0_OR) | CONFIG_SYS_PLD_RESET);
 	udelay(1000); /* wait 1ms */
 
 	return 0;
 }
 
-
-/* ------------------------------------------------------------------------- */
-
-int misc_init_f (void)
-{
-	return 0;  /* dummy implementation */
-}
-
-
 int misc_init_r (void)
 {
 	/* adjust flash start and offset */
@@ -95,7 +86,7 @@ int misc_init_r (void)
 	/*
 	 * Setup and enable EEPROM write protection
 	 */
-	out_be32((void *)GPIO0_OR, in_be32((void *)GPIO0_OR) | CFG_EEPROM_WP);
+	out_be32((void *)GPIO0_OR, in_be32((void *)GPIO0_OR) | CONFIG_SYS_EEPROM_WP);
 
 	return (0);
 }
@@ -110,8 +101,8 @@ int checkboard (void)
 	char str[64];
 	int flashcnt;
 	int delay;
-	volatile unsigned char *led_reg = (unsigned char *)((ulong)CFG_PLD_BASE + 0x1000);
-	volatile unsigned char *ver_reg = (unsigned char *)((ulong)CFG_PLD_BASE + 0x1001);
+	volatile unsigned char *led_reg = (unsigned char *)((ulong)CONFIG_SYS_PLD_BASE + 0x1000);
+	volatile unsigned char *ver_reg = (unsigned char *)((ulong)CONFIG_SYS_PLD_BASE + 0x1001);
 
 	puts ("Board: ");
 
@@ -141,19 +132,7 @@ int checkboard (void)
 
 /* ------------------------------------------------------------------------- */
 
-phys_size_t initdram (int board_type)
-{
-	unsigned long val;
-
-	mtdcr(memcfga, mem_mb0cf);
-	val = mfdcr(memcfgd);
-
-	return (4*1024*1024 << ((val & 0x000e0000) >> 17));
-}
-
-/* ------------------------------------------------------------------------- */
-
-#if defined(CFG_EEPROM_WREN)
+#if defined(CONFIG_SYS_EEPROM_WREN)
 /* Input: <dev_addr>  I2C address of EEPROM device to enable.
  *         <state>     -1: deliver current state
  *	               0: disable write
@@ -164,23 +143,23 @@ phys_size_t initdram (int board_type)
  */
 int eeprom_write_enable (unsigned dev_addr, int state)
 {
-	if (CFG_I2C_EEPROM_ADDR != dev_addr) {
+	if (CONFIG_SYS_I2C_EEPROM_ADDR != dev_addr) {
 		return -1;
 	} else {
 		switch (state) {
 		case 1:
 			/* Enable write access, clear bit GPIO_SINT2. */
-			out_be32((void *)GPIO0_OR, in_be32((void *)GPIO0_OR) & ~CFG_EEPROM_WP);
+			out_be32((void *)GPIO0_OR, in_be32((void *)GPIO0_OR) & ~CONFIG_SYS_EEPROM_WP);
 			state = 0;
 			break;
 		case 0:
 			/* Disable write access, set bit GPIO_SINT2. */
-			out_be32((void *)GPIO0_OR, in_be32((void *)GPIO0_OR) | CFG_EEPROM_WP);
+			out_be32((void *)GPIO0_OR, in_be32((void *)GPIO0_OR) | CONFIG_SYS_EEPROM_WP);
 			state = 0;
 			break;
 		default:
 			/* Read current status back. */
-			state = (0 == (in_be32((void *)GPIO0_OR) & CFG_EEPROM_WP));
+			state = (0 == (in_be32((void *)GPIO0_OR) & CONFIG_SYS_EEPROM_WP));
 			break;
 		}
 	}
@@ -194,21 +173,21 @@ int do_eep_wren (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 
 	if (query) {
 		/* Query write access state. */
-		state = eeprom_write_enable (CFG_I2C_EEPROM_ADDR, -1);
+		state = eeprom_write_enable (CONFIG_SYS_I2C_EEPROM_ADDR, -1);
 		if (state < 0) {
 			puts ("Query of write access state failed.\n");
 		} else {
 			printf ("Write access for device 0x%0x is %sabled.\n",
-				CFG_I2C_EEPROM_ADDR, state ? "en" : "dis");
+				CONFIG_SYS_I2C_EEPROM_ADDR, state ? "en" : "dis");
 			state = 0;
 		}
 	} else {
 		if ('0' == argv[1][0]) {
 			/* Disable write access. */
-			state = eeprom_write_enable (CFG_I2C_EEPROM_ADDR, 0);
+			state = eeprom_write_enable (CONFIG_SYS_I2C_EEPROM_ADDR, 0);
 		} else {
 			/* Enable write access. */
-			state = eeprom_write_enable (CFG_I2C_EEPROM_ADDR, 1);
+			state = eeprom_write_enable (CONFIG_SYS_I2C_EEPROM_ADDR, 1);
 		}
 		if (state < 0) {
 			puts ("Setup of write access state failed.\n");
@@ -221,7 +200,7 @@ int do_eep_wren (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 U_BOOT_CMD(eepwren,	2,	0,	do_eep_wren,
 	   "eepwren - Enable / disable / query EEPROM write access\n",
 	   NULL);
-#endif /* #if defined(CFG_EEPROM_WREN) */
+#endif /* #if defined(CONFIG_SYS_EEPROM_WREN) */
 
 /* ------------------------------------------------------------------------- */
 
diff --git a/board/esd/cms700/flash.c b/board/esd/cms700/flash.c
index 89af1190a..274ada9fe 100644
--- a/board/esd/cms700/flash.c
+++ b/board/esd/cms700/flash.c
@@ -48,7 +48,7 @@ unsigned long flash_init (void)
 	int size_val = 0;
 
 	/* Init: no FLASHes known */
-	for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) {
+	for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
 		flash_info[i].flash_id = FLASH_UNKNOWN;
 	}
 
@@ -91,7 +91,7 @@ unsigned long flash_init (void)
 
 	/* Monitor protection ON by default */
 	(void)flash_protect(FLAG_PROTECT_SET,
-			    -CFG_MONITOR_LEN,
+			    -CONFIG_SYS_MONITOR_LEN,
 			    0xffffffff,
 			    &flash_info[0]);
 
diff --git a/board/esd/cms700/u-boot.lds b/board/esd/cms700/u-boot.lds
index 21547ac27..9697cc6b3 100644
--- a/board/esd/cms700/u-boot.lds
+++ b/board/esd/cms700/u-boot.lds
@@ -72,7 +72,7 @@ SECTIONS
     lib_generic/zlib.o		(.text)
 
 /*    . = env_offset;*/
-/*    common/environment.o(.text)*/
+/*    common/env_embedded.o(.text)*/
 
     *(.text)
     *(.fixup)
@@ -143,6 +143,7 @@ SECTIONS
    *(.dynbss)
    *(.bss)
    *(COMMON)
+   . = ALIGN(4);
   }
   _end = . ;
   PROVIDE (end = .);
diff --git a/board/esd/common/auto_update.c b/board/esd/common/auto_update.c
index a1e0ce5a2..633f64178 100644
--- a/board/esd/common/auto_update.c
+++ b/board/esd/common/auto_update.c
@@ -72,7 +72,7 @@ extern int nand_legacy_erase(struct nand_chip* nand, size_t ofs,
 			     size_t len, int clean);
 #endif
 
-extern block_dev_desc_t ide_dev_desc[CFG_IDE_MAXDEVICE];
+extern block_dev_desc_t ide_dev_desc[CONFIG_SYS_IDE_MAXDEVICE];
 
 int au_check_cksum_valid(int i, long nbytes)
 {
@@ -335,7 +335,7 @@ static void process_macros (const char *input, char *output)
 	char c, prev;
 	const char *varname_start = NULL;
 	int inputcnt  = strlen (input);
-	int outputcnt = CFG_CBSIZE;
+	int outputcnt = CONFIG_SYS_CBSIZE;
 	int state = 0;	/* 0 = waiting for '$'	*/
 			/* 1 = waiting for '(' or '{' */
 			/* 2 = waiting for ')' or '}' */
@@ -394,7 +394,7 @@ static void process_macros (const char *input, char *output)
 	    case 2:			/* Waiting for )	*/
 		if (c == ')' || c == '}') {
 			int i;
-			char envname[CFG_CBSIZE], *envval;
+			char envname[CONFIG_SYS_CBSIZE], *envval;
 			/* Varname # of chars */
 			int envcnt = input - varname_start - 1;
 
diff --git a/board/esd/common/cmd_loadpci.c b/board/esd/common/cmd_loadpci.c
index d88b3876d..ad490c349 100644
--- a/board/esd/common/cmd_loadpci.c
+++ b/board/esd/common/cmd_loadpci.c
@@ -1,5 +1,5 @@
 /*
- * (C) Copyright 2005
+ * (C) Copyright 2005-2008
  * Matthias Fuchs, esd GmbH Germany, matthias.fuchs@esd-electronics.com
  *
  * See file CREDITS for list of people who contributed to this
@@ -23,6 +23,9 @@
 
 #include <common.h>
 #include <command.h>
+#if !defined(CONFIG_440)
+#include <asm/4xx_pci.h>
+#endif
 
 #if defined(CONFIG_CMD_BSP)
 
@@ -36,18 +39,24 @@ extern int do_autoscript (cmd_tbl_t *, int, int, char *[]);
  */
 int do_loadpci(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 {
-	unsigned int *ptr = 0;
+	u32 *ptr = 0;
 	int count = 0;
 	int count2 = 0;
 	char addr[16];
 	char str[] = "\\|/-";
 	char *local_args[2];
+	u32 la, ptm1la;
 
+#if defined(CONFIG_440)
+	ptm1la = in32r(PCIX0_PTM1LA);
+#else
+	ptm1la = in32r(PTM1LA);
+#endif
 	while(1) {
 		/*
 		 * Mark sync address
 		 */
-		ptr = 0;
+		ptr = (u32 *)ptm1la;
 		memset(ptr, 0, 0x20);
 
 		*ptr = 0xffffffff;
@@ -74,7 +83,8 @@ int do_loadpci(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 		}
 
 		printf("\nGot bootcode %08x: ", *ptr);
-		sprintf(addr, "%08x", *ptr & ADDRMASK);
+		la = ptm1la + (*ptr & ADDRMASK);
+		sprintf(addr, "%08x", la);
 
 		switch (*ptr & ~ADDRMASK) {
 		case 0:
@@ -83,8 +93,7 @@ int do_loadpci(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 			 */
 			printf("booting image at addr 0x%s ...\n", addr);
 			setenv("loadaddr", addr);
-
-			do_bootm (cmdtp, 0, 0, NULL);
+			do_bootm(cmdtp, 0, 0, NULL);
 			break;
 
 		case 1:
@@ -92,7 +101,6 @@ int do_loadpci(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 			 * Boot image via autoscr
 			 */
 			printf("executing script at addr 0x%s ...\n", addr);
-
 			local_args[0] = addr;
 			local_args[1] = NULL;
 			do_autoscript(cmdtp, 0, 1, local_args);
@@ -103,7 +111,7 @@ int do_loadpci(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 			 * Call run_cmd
 			 */
 			printf("running command at addr 0x%s ...\n", addr);
-			run_command ((char*)(*ptr & ADDRMASK), 0);
+			run_command((char*)la, 0);
 			break;
 
 		default:
diff --git a/board/esd/common/esd405ep_nand.c b/board/esd/common/esd405ep_nand.c
index 40d1efb08..736176f5d 100644
--- a/board/esd/common/esd405ep_nand.c
+++ b/board/esd/common/esd405ep_nand.c
@@ -35,17 +35,17 @@ static void esd405ep_nand_hwcontrol(struct mtd_info *mtd, int cmd, unsigned int
 	struct nand_chip *this = mtd->priv;
 	if (ctrl & NAND_CTRL_CHANGE) {
 		if ( ctrl & NAND_CLE )
-			out_be32((void *)GPIO0_OR, in_be32((void *)GPIO0_OR) | CFG_NAND_CLE);
+			out_be32((void *)GPIO0_OR, in_be32((void *)GPIO0_OR) | CONFIG_SYS_NAND_CLE);
 		else
-			out_be32((void *)GPIO0_OR, in_be32((void *)GPIO0_OR) & ~CFG_NAND_CLE);
+			out_be32((void *)GPIO0_OR, in_be32((void *)GPIO0_OR) & ~CONFIG_SYS_NAND_CLE);
 		if ( ctrl & NAND_ALE )
-			out_be32((void *)GPIO0_OR, in_be32((void *)GPIO0_OR) | CFG_NAND_ALE);
+			out_be32((void *)GPIO0_OR, in_be32((void *)GPIO0_OR) | CONFIG_SYS_NAND_ALE);
 		else
-			out_be32((void *)GPIO0_OR, in_be32((void *)GPIO0_OR) & ~CFG_NAND_ALE);
+			out_be32((void *)GPIO0_OR, in_be32((void *)GPIO0_OR) & ~CONFIG_SYS_NAND_ALE);
 		if ( ctrl & NAND_NCE )
-			out_be32((void *)GPIO0_OR, in_be32((void *)GPIO0_OR) & ~CFG_NAND_CE);
+			out_be32((void *)GPIO0_OR, in_be32((void *)GPIO0_OR) & ~CONFIG_SYS_NAND_CE);
 		else
-			out_be32((void *)GPIO0_OR, in_be32((void *)GPIO0_OR) | CFG_NAND_CE);
+			out_be32((void *)GPIO0_OR, in_be32((void *)GPIO0_OR) | CONFIG_SYS_NAND_CE);
 	}
 
 	if (cmd != NAND_CMD_NONE)
@@ -58,7 +58,7 @@ static void esd405ep_nand_hwcontrol(struct mtd_info *mtd, int cmd, unsigned int
  */
 static int esd405ep_nand_device_ready(struct mtd_info *mtdinfo)
 {
-	if (in_be32((void *)GPIO0_IR) & CFG_NAND_RDY)
+	if (in_be32((void *)GPIO0_IR) & CONFIG_SYS_NAND_RDY)
 		return 1;
 	return 0;
 }
@@ -69,8 +69,8 @@ int board_nand_init(struct nand_chip *nand)
 	/*
 	 * Set NAND-FLASH GPIO signals to defaults
 	 */
-	out_be32((void *)GPIO0_OR, in_be32((void *)GPIO0_OR) & ~(CFG_NAND_CLE | CFG_NAND_ALE));
-	out_be32((void *)GPIO0_OR, in_be32((void *)GPIO0_OR) | CFG_NAND_CE);
+	out_be32((void *)GPIO0_OR, in_be32((void *)GPIO0_OR) & ~(CONFIG_SYS_NAND_CLE | CONFIG_SYS_NAND_ALE));
+	out_be32((void *)GPIO0_OR, in_be32((void *)GPIO0_OR) | CONFIG_SYS_NAND_CE);
 
 	/*
 	 * Initialize nand_chip structure
diff --git a/board/esd/common/flash.c b/board/esd/common/flash.c
index bda361ead..3ea053b8c 100644
--- a/board/esd/common/flash.c
+++ b/board/esd/common/flash.c
@@ -27,7 +27,7 @@
 #endif
 #include <asm/processor.h>
 
-flash_info_t	flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips	*/
+flash_info_t	flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips	*/
 
 /*-----------------------------------------------------------------------
  * Functions
@@ -167,7 +167,7 @@ void flash_print_info  (flash_info_t *info)
 
 	printf ("  Sector Start Addresses:");
 	for (i=0; i<info->sector_count; ++i) {
-#ifdef CFG_FLASH_EMPTY_INFO
+#ifdef CONFIG_SYS_FLASH_EMPTY_INFO
 		/*
 		 * Check if whole sector is erased
 		 */
@@ -221,28 +221,28 @@ static ulong flash_get_size (vu_long *addr, flash_info_t *info)
 {
 	short i;
 	short n;
-	CFG_FLASH_WORD_SIZE value;
+	CONFIG_SYS_FLASH_WORD_SIZE value;
 	ulong base = (ulong)addr;
-	volatile CFG_FLASH_WORD_SIZE *addr2 = (CFG_FLASH_WORD_SIZE *)addr;
+	volatile CONFIG_SYS_FLASH_WORD_SIZE *addr2 = (CONFIG_SYS_FLASH_WORD_SIZE *)addr;
 
 	/* Write auto select command: read Manufacturer ID */
-	addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE)0x00AA00AA;
-	addr2[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE)0x00550055;
-	addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE)0x00900090;
+	addr2[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE)0x00AA00AA;
+	addr2[CONFIG_SYS_FLASH_ADDR1] = (CONFIG_SYS_FLASH_WORD_SIZE)0x00550055;
+	addr2[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE)0x00900090;
 
-	value = addr2[CFG_FLASH_READ0];
+	value = addr2[CONFIG_SYS_FLASH_READ0];
 
 	switch (value) {
-	case (CFG_FLASH_WORD_SIZE)AMD_MANUFACT:
+	case (CONFIG_SYS_FLASH_WORD_SIZE)AMD_MANUFACT:
 		info->flash_id = FLASH_MAN_AMD;
 		break;
-	case (CFG_FLASH_WORD_SIZE)FUJ_MANUFACT:
+	case (CONFIG_SYS_FLASH_WORD_SIZE)FUJ_MANUFACT:
 		info->flash_id = FLASH_MAN_FUJ;
 		break;
-	case (CFG_FLASH_WORD_SIZE)SST_MANUFACT:
+	case (CONFIG_SYS_FLASH_WORD_SIZE)SST_MANUFACT:
 		info->flash_id = FLASH_MAN_SST;
 		break;
-	case (CFG_FLASH_WORD_SIZE)EXCEL_MANUFACT:
+	case (CONFIG_SYS_FLASH_WORD_SIZE)EXCEL_MANUFACT:
 		info->flash_id = FLASH_MAN_EXCEL;
 		break;
 	default:
@@ -252,104 +252,104 @@ static ulong flash_get_size (vu_long *addr, flash_info_t *info)
 		return (0);			/* no or unknown flash	*/
 	}
 
-	value = addr2[CFG_FLASH_READ1];		/* device ID		*/
+	value = addr2[CONFIG_SYS_FLASH_READ1];		/* device ID		*/
 
 	switch (value) {
-	case (CFG_FLASH_WORD_SIZE)AMD_ID_LV400T:
+	case (CONFIG_SYS_FLASH_WORD_SIZE)AMD_ID_LV400T:
 		info->flash_id += FLASH_AM400T;
 		info->sector_count = 11;
 		info->size = 0x00080000;
 		break;				/* => 0.5 MB		*/
 
-	case (CFG_FLASH_WORD_SIZE)AMD_ID_LV400B:
+	case (CONFIG_SYS_FLASH_WORD_SIZE)AMD_ID_LV400B:
 		info->flash_id += FLASH_AM400B;
 		info->sector_count = 11;
 		info->size = 0x00080000;
 		break;				/* => 0.5 MB		*/
 
-	case (CFG_FLASH_WORD_SIZE)AMD_ID_LV800T:
+	case (CONFIG_SYS_FLASH_WORD_SIZE)AMD_ID_LV800T:
 		info->flash_id += FLASH_AM800T;
 		info->sector_count = 19;
 		info->size = 0x00100000;
 		break;				/* => 1 MB		*/
 
-	case (CFG_FLASH_WORD_SIZE)AMD_ID_LV800B:
+	case (CONFIG_SYS_FLASH_WORD_SIZE)AMD_ID_LV800B:
 		info->flash_id += FLASH_AM800B;
 		info->sector_count = 19;
 		info->size = 0x00100000;
 		break;				/* => 1 MB		*/
 
-	case (CFG_FLASH_WORD_SIZE)AMD_ID_LV160T:
+	case (CONFIG_SYS_FLASH_WORD_SIZE)AMD_ID_LV160T:
 		info->flash_id += FLASH_AM160T;
 		info->sector_count = 35;
 		info->size = 0x00200000;
 		break;				/* => 2 MB		*/
 
-	case (CFG_FLASH_WORD_SIZE)AMD_ID_LV160B:
+	case (CONFIG_SYS_FLASH_WORD_SIZE)AMD_ID_LV160B:
 		info->flash_id += FLASH_AM160B;
 		info->sector_count = 35;
 		info->size = 0x00200000;
 		break;				/* => 2 MB		*/
 
-	case (CFG_FLASH_WORD_SIZE)AMD_ID_LV320T:
+	case (CONFIG_SYS_FLASH_WORD_SIZE)AMD_ID_LV320T:
 		info->flash_id += FLASH_AM320T;
 		info->sector_count = 71;
 		info->size = 0x00400000;  break;	/* => 4 MB	*/
 
-	case (CFG_FLASH_WORD_SIZE)AMD_ID_LV320B:
+	case (CONFIG_SYS_FLASH_WORD_SIZE)AMD_ID_LV320B:
 		info->flash_id += FLASH_AM320B;
 		info->sector_count = 71;
 		info->size = 0x00400000;  break;	/* => 4 MB	*/
 
-	case (CFG_FLASH_WORD_SIZE)AMD_ID_DL322T:
+	case (CONFIG_SYS_FLASH_WORD_SIZE)AMD_ID_DL322T:
 		info->flash_id += FLASH_AMDL322T;
 		info->sector_count = 71;
 		info->size = 0x00400000;  break;	/* => 4 MB	*/
 
-	case (CFG_FLASH_WORD_SIZE)AMD_ID_DL322B:
+	case (CONFIG_SYS_FLASH_WORD_SIZE)AMD_ID_DL322B:
 		info->flash_id += FLASH_AMDL322B;
 		info->sector_count = 71;
 		info->size = 0x00400000;  break;	/* => 4 MB	*/
 
-	case (CFG_FLASH_WORD_SIZE)AMD_ID_DL323T:
+	case (CONFIG_SYS_FLASH_WORD_SIZE)AMD_ID_DL323T:
 		info->flash_id += FLASH_AMDL323T;
 		info->sector_count = 71;
 		info->size = 0x00400000;  break;	/* => 4 MB	*/
 
-	case (CFG_FLASH_WORD_SIZE)AMD_ID_DL323B:
+	case (CONFIG_SYS_FLASH_WORD_SIZE)AMD_ID_DL323B:
 		info->flash_id += FLASH_AMDL323B;
 		info->sector_count = 71;
 		info->size = 0x00400000;  break;	/* => 4 MB	*/
 
-	case (CFG_FLASH_WORD_SIZE)AMD_ID_LV640U:
+	case (CONFIG_SYS_FLASH_WORD_SIZE)AMD_ID_LV640U:
 		info->flash_id += FLASH_AM640U;
 		info->sector_count = 128;
 		info->size = 0x00800000;  break;	/* => 8 MB	*/
 
 #if !(defined(CONFIG_ADCIOP) || defined(CONFIG_DASA_SIM))
-	case (CFG_FLASH_WORD_SIZE)SST_ID_xF800A:
+	case (CONFIG_SYS_FLASH_WORD_SIZE)SST_ID_xF800A:
 		info->flash_id += FLASH_SST800A;
 		info->sector_count = 16;
 		info->size = 0x00100000;
 		break;				/* => 1 MB		*/
 
-	case (CFG_FLASH_WORD_SIZE)SST_ID_xF160A:
-	case (CFG_FLASH_WORD_SIZE)SST_ID_xF1601:
-	case (CFG_FLASH_WORD_SIZE)SST_ID_xF1602:
+	case (CONFIG_SYS_FLASH_WORD_SIZE)SST_ID_xF160A:
+	case (CONFIG_SYS_FLASH_WORD_SIZE)SST_ID_xF1601:
+	case (CONFIG_SYS_FLASH_WORD_SIZE)SST_ID_xF1602:
 		info->flash_id += FLASH_SST160A;
 		info->sector_count = 32;
 		info->size = 0x00200000;
 		break;				/* => 2 MB		*/
 
-	case (CFG_FLASH_WORD_SIZE)SST_ID_xF3201:
-	case (CFG_FLASH_WORD_SIZE)SST_ID_xF3202:
+	case (CONFIG_SYS_FLASH_WORD_SIZE)SST_ID_xF3201:
+	case (CONFIG_SYS_FLASH_WORD_SIZE)SST_ID_xF3202:
 		info->flash_id += FLASH_SST320;
 		info->sector_count = 64;
 		info->size = 0x00400000;
 		break;				/* => 4 MB		*/
 
-	case (CFG_FLASH_WORD_SIZE)SST_ID_xF6401:
-	case (CFG_FLASH_WORD_SIZE)SST_ID_xF6402:
+	case (CONFIG_SYS_FLASH_WORD_SIZE)SST_ID_xF6401:
+	case (CONFIG_SYS_FLASH_WORD_SIZE)SST_ID_xF6402:
 		info->flash_id += FLASH_SST640;
 		info->sector_count = 128;
 		info->size = 0x00800000;
@@ -424,19 +424,19 @@ static ulong flash_get_size (vu_long *addr, flash_info_t *info)
 	for (i = 0; i < info->sector_count; i++) {
 		/* read sector protection at sector address, (A7 .. A0) = 0x02 */
 		/* D0 = 1 if protected */
-		addr2 = (volatile CFG_FLASH_WORD_SIZE *)(info->start[i]);
+		addr2 = (volatile CONFIG_SYS_FLASH_WORD_SIZE *)(info->start[i]);
 		if ((info->flash_id & FLASH_VENDMASK) != FLASH_MAN_AMD)
 		  info->protect[i] = 0;
 		else
-		  info->protect[i] = addr2[CFG_FLASH_READ2] & 1;
+		  info->protect[i] = addr2[CONFIG_SYS_FLASH_READ2] & 1;
 	}
 
 	/*
 	 * Prevent writes to uninitialized FLASH.
 	 */
 	if (info->flash_id != FLASH_UNKNOWN) {
-		addr2 = (CFG_FLASH_WORD_SIZE *)info->start[0];
-		*addr2 = (CFG_FLASH_WORD_SIZE)0x00F000F0;	/* reset bank */
+		addr2 = (CONFIG_SYS_FLASH_WORD_SIZE *)info->start[0];
+		*addr2 = (CONFIG_SYS_FLASH_WORD_SIZE)0x00F000F0;	/* reset bank */
 	}
 
 	return (info->size);
@@ -448,8 +448,8 @@ static ulong flash_get_size (vu_long *addr, flash_info_t *info)
 
 int	flash_erase (flash_info_t *info, int s_first, int s_last)
 {
-	volatile CFG_FLASH_WORD_SIZE *addr = (CFG_FLASH_WORD_SIZE *)(info->start[0]);
-	volatile CFG_FLASH_WORD_SIZE *addr2;
+	volatile CONFIG_SYS_FLASH_WORD_SIZE *addr = (CONFIG_SYS_FLASH_WORD_SIZE *)(info->start[0]);
+	volatile CONFIG_SYS_FLASH_WORD_SIZE *addr2;
 	int flag, prot, sect, l_sect;
 	ulong start, now, last;
 	int i;
@@ -490,25 +490,25 @@ int	flash_erase (flash_info_t *info, int s_first, int s_last)
 	/* Start erase on unprotected sectors */
 	for (sect = s_first; sect<=s_last; sect++) {
 		if (info->protect[sect] == 0) {	/* not protected */
-		    addr2 = (CFG_FLASH_WORD_SIZE *)(info->start[sect]);
+		    addr2 = (CONFIG_SYS_FLASH_WORD_SIZE *)(info->start[sect]);
 		    if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) {
-			addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE)0x00AA00AA;
-			addr[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE)0x00550055;
-			addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE)0x00800080;
-			addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE)0x00AA00AA;
-			addr[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE)0x00550055;
-			addr2[0] = (CFG_FLASH_WORD_SIZE)0x00500050;  /* block erase */
+			addr[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE)0x00AA00AA;
+			addr[CONFIG_SYS_FLASH_ADDR1] = (CONFIG_SYS_FLASH_WORD_SIZE)0x00550055;
+			addr[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE)0x00800080;
+			addr[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE)0x00AA00AA;
+			addr[CONFIG_SYS_FLASH_ADDR1] = (CONFIG_SYS_FLASH_WORD_SIZE)0x00550055;
+			addr2[0] = (CONFIG_SYS_FLASH_WORD_SIZE)0x00500050;  /* block erase */
 			for (i=0; i<50; i++)
 			  udelay(1000);  /* wait 1 ms */
 		    } else {
 			if (sect == s_first) {
-			    addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE)0x00AA00AA;
-			    addr[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE)0x00550055;
-			    addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE)0x00800080;
-			    addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE)0x00AA00AA;
-			    addr[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE)0x00550055;
+			    addr[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE)0x00AA00AA;
+			    addr[CONFIG_SYS_FLASH_ADDR1] = (CONFIG_SYS_FLASH_WORD_SIZE)0x00550055;
+			    addr[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE)0x00800080;
+			    addr[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE)0x00AA00AA;
+			    addr[CONFIG_SYS_FLASH_ADDR1] = (CONFIG_SYS_FLASH_WORD_SIZE)0x00550055;
 			}
-			addr2[0] = (CFG_FLASH_WORD_SIZE)0x00300030;  /* sector erase */
+			addr2[0] = (CONFIG_SYS_FLASH_WORD_SIZE)0x00300030;  /* sector erase */
 		    }
 		    l_sect = sect;
 		}
@@ -529,9 +529,9 @@ int	flash_erase (flash_info_t *info, int s_first, int s_last)
 
 	start = get_timer (0);
 	last  = start;
-	addr = (CFG_FLASH_WORD_SIZE *)(info->start[l_sect]);
-	while ((addr[0] & (CFG_FLASH_WORD_SIZE)0x00800080) != (CFG_FLASH_WORD_SIZE)0x00800080) {
-		if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+	addr = (CONFIG_SYS_FLASH_WORD_SIZE *)(info->start[l_sect]);
+	while ((addr[0] & (CONFIG_SYS_FLASH_WORD_SIZE)0x00800080) != (CONFIG_SYS_FLASH_WORD_SIZE)0x00800080) {
+		if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
 			printf ("Timeout\n");
 			return 1;
 		}
@@ -544,8 +544,8 @@ int	flash_erase (flash_info_t *info, int s_first, int s_last)
 
 DONE:
 	/* reset to read mode */
-	addr = (CFG_FLASH_WORD_SIZE *)info->start[0];
-	addr[0] = (CFG_FLASH_WORD_SIZE)0x00F000F0;	/* reset bank */
+	addr = (CONFIG_SYS_FLASH_WORD_SIZE *)info->start[0];
+	addr[0] = (CONFIG_SYS_FLASH_WORD_SIZE)0x00F000F0;	/* reset bank */
 
 	printf (" done\n");
 	return 0;
@@ -630,9 +630,9 @@ int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
  */
 static int write_word (flash_info_t *info, ulong dest, ulong data)
 {
-	volatile CFG_FLASH_WORD_SIZE *addr2 = (CFG_FLASH_WORD_SIZE *)(info->start[0]);
-	volatile CFG_FLASH_WORD_SIZE *dest2 = (CFG_FLASH_WORD_SIZE *)dest;
-	volatile CFG_FLASH_WORD_SIZE *data2 = (CFG_FLASH_WORD_SIZE *)&data;
+	volatile CONFIG_SYS_FLASH_WORD_SIZE *addr2 = (CONFIG_SYS_FLASH_WORD_SIZE *)(info->start[0]);
+	volatile CONFIG_SYS_FLASH_WORD_SIZE *dest2 = (CONFIG_SYS_FLASH_WORD_SIZE *)dest;
+	volatile CONFIG_SYS_FLASH_WORD_SIZE *data2 = (CONFIG_SYS_FLASH_WORD_SIZE *)&data;
 	ulong start;
 	int flag;
 	int i;
@@ -645,11 +645,11 @@ static int write_word (flash_info_t *info, ulong dest, ulong data)
 	/* Disable interrupts which might cause a timeout here */
 	flag = disable_interrupts();
 
-	for (i=0; i<4/sizeof(CFG_FLASH_WORD_SIZE); i++)
+	for (i=0; i<4/sizeof(CONFIG_SYS_FLASH_WORD_SIZE); i++)
 	  {
-	    addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE)0x00AA00AA;
-	    addr2[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE)0x00550055;
-	    addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE)0x00A000A0;
+	    addr2[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE)0x00AA00AA;
+	    addr2[CONFIG_SYS_FLASH_ADDR1] = (CONFIG_SYS_FLASH_WORD_SIZE)0x00550055;
+	    addr2[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE)0x00A000A0;
 
 	    dest2[i] = data2[i];
 
@@ -659,9 +659,9 @@ static int write_word (flash_info_t *info, ulong dest, ulong data)
 
 	    /* data polling for D7 */
 	    start = get_timer (0);
-	    while ((dest2[i] & (CFG_FLASH_WORD_SIZE)0x00800080) !=
-		   (data2[i] & (CFG_FLASH_WORD_SIZE)0x00800080)) {
-	      if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+	    while ((dest2[i] & (CONFIG_SYS_FLASH_WORD_SIZE)0x00800080) !=
+		   (data2[i] & (CONFIG_SYS_FLASH_WORD_SIZE)0x00800080)) {
+	      if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
 		return (1);
 	      }
 	    }
diff --git a/board/esd/common/fpga.c b/board/esd/common/fpga.c
index 9e2be7eaf..5232dddc9 100644
--- a/board/esd/common/fpga.c
+++ b/board/esd/common/fpga.c
@@ -36,12 +36,12 @@
 
 #define MAX_ONES               226
 
-#ifdef CFG_FPGA_PRG
-# define FPGA_PRG              CFG_FPGA_PRG	/* FPGA program pin (ppc output) */
-# define FPGA_CLK              CFG_FPGA_CLK	/* FPGA clk pin (ppc output)    */
-# define FPGA_DATA             CFG_FPGA_DATA	/* FPGA data pin (ppc output)  */
-# define FPGA_DONE             CFG_FPGA_DONE	/* FPGA done pin (ppc input)   */
-# define FPGA_INIT             CFG_FPGA_INIT	/* FPGA init pin (ppc input)   */
+#ifdef CONFIG_SYS_FPGA_PRG
+# define FPGA_PRG              CONFIG_SYS_FPGA_PRG	/* FPGA program pin (ppc output) */
+# define FPGA_CLK              CONFIG_SYS_FPGA_CLK	/* FPGA clk pin (ppc output)    */
+# define FPGA_DATA             CONFIG_SYS_FPGA_DATA	/* FPGA data pin (ppc output)  */
+# define FPGA_DONE             CONFIG_SYS_FPGA_DONE	/* FPGA done pin (ppc input)   */
+# define FPGA_INIT             CONFIG_SYS_FPGA_INIT	/* FPGA init pin (ppc input)   */
 #else
 # define FPGA_PRG              0x04000000	/* FPGA program pin (ppc output) */
 # define FPGA_CLK              0x02000000	/* FPGA clk pin (ppc output)     */
@@ -98,7 +98,7 @@ static int fpga_boot (const unsigned char *fpgadata, int size)
 	int count;
 	unsigned char b;
 
-#ifdef CFG_FPGA_SPARTAN2
+#ifdef CONFIG_SYS_FPGA_SPARTAN2
 	int j;
 #else
 	int bit;
@@ -112,7 +112,7 @@ static int fpga_boot (const unsigned char *fpgadata, int size)
 		index += len + 3;
 	}
 
-#ifdef CFG_FPGA_SPARTAN2
+#ifdef CONFIG_SYS_FPGA_SPARTAN2
 	/* search for preamble 0xFFFFFFFF */
 	while (1) {
 		if ((fpgadata[index] == 0xff) && (fpgadata[index + 1] == 0xff)
@@ -186,7 +186,7 @@ static int fpga_boot (const unsigned char *fpgadata, int size)
 	DBG ("write configuration data into fpga\n");
 	/* write configuration-data into fpga... */
 
-#ifdef CFG_FPGA_SPARTAN2
+#ifdef CONFIG_SYS_FPGA_SPARTAN2
 	/*
 	 * Load uncompressed image into fpga
 	 */
diff --git a/board/esd/common/lcd.c b/board/esd/common/lcd.c
index c23dc81a2..1eea59ecb 100644
--- a/board/esd/common/lcd.c
+++ b/board/esd/common/lcd.c
@@ -37,7 +37,7 @@ int lcd_depth;
 unsigned char *glob_lcd_reg;
 unsigned char *glob_lcd_mem;
 
-#if defined(CFG_LCD_ENDIAN)
+#if defined(CONFIG_SYS_LCD_ENDIAN)
 void lcd_setup(int lcd, int config)
 {
 	if (lcd == 0) {
@@ -47,21 +47,21 @@ void lcd_setup(int lcd, int config)
 
 		/* set reset to low */
 		out_be32((void*)GPIO0_OR,
-			 in_be32((void*)GPIO0_OR) & ~CFG_LCD0_RST);
+			 in_be32((void*)GPIO0_OR) & ~CONFIG_SYS_LCD0_RST);
 		udelay(10); /* wait 10us */
 		if (config == 1) {
 			/* big-endian */
 			out_be32((void*)GPIO0_OR,
-				 in_be32((void*)GPIO0_OR) | CFG_LCD_ENDIAN);
+				 in_be32((void*)GPIO0_OR) | CONFIG_SYS_LCD_ENDIAN);
 		} else {
 			/* little-endian */
 			out_be32((void*)GPIO0_OR,
-				 in_be32((void*)GPIO0_OR) & ~CFG_LCD_ENDIAN);
+				 in_be32((void*)GPIO0_OR) & ~CONFIG_SYS_LCD_ENDIAN);
 		}
 		udelay(10); /* wait 10us */
 		/* set reset to high */
 		out_be32((void*)GPIO0_OR,
-			 in_be32((void*)GPIO0_OR) | CFG_LCD0_RST);
+			 in_be32((void*)GPIO0_OR) | CONFIG_SYS_LCD0_RST);
 	} else {
 		/*
 		 * Set endianess and reset lcd controller 1 (big)
@@ -69,29 +69,29 @@ void lcd_setup(int lcd, int config)
 
 		/* set reset to low */
 		out_be32((void*)GPIO0_OR,
-			 in_be32((void*)GPIO0_OR) & ~CFG_LCD1_RST);
+			 in_be32((void*)GPIO0_OR) & ~CONFIG_SYS_LCD1_RST);
 		udelay(10); /* wait 10us */
 		if (config == 1) {
 			/* big-endian */
 			out_be32((void*)GPIO0_OR,
-				 in_be32((void*)GPIO0_OR) | CFG_LCD_ENDIAN);
+				 in_be32((void*)GPIO0_OR) | CONFIG_SYS_LCD_ENDIAN);
 		} else {
 			/* little-endian */
 			out_be32((void*)GPIO0_OR,
-				 in_be32((void*)GPIO0_OR) & ~CFG_LCD_ENDIAN);
+				 in_be32((void*)GPIO0_OR) & ~CONFIG_SYS_LCD_ENDIAN);
 		}
 		udelay(10); /* wait 10us */
 		/* set reset to high */
 		out_be32((void*)GPIO0_OR,
-			 in_be32((void*)GPIO0_OR) | CFG_LCD1_RST);
+			 in_be32((void*)GPIO0_OR) | CONFIG_SYS_LCD1_RST);
 	}
 
 	/*
-	 * CFG_LCD_ENDIAN may also be FPGA_RESET, so set inactive
+	 * CONFIG_SYS_LCD_ENDIAN may also be FPGA_RESET, so set inactive
 	 */
-	out_be32((void*)GPIO0_OR, in_be32((void*)GPIO0_OR) | CFG_LCD_ENDIAN);
+	out_be32((void*)GPIO0_OR, in_be32((void*)GPIO0_OR) | CONFIG_SYS_LCD_ENDIAN);
 }
-#endif /* CFG_LCD_ENDIAN */
+#endif /* CONFIG_SYS_LCD_ENDIAN */
 
 
 int lcd_bmp(uchar *logo_bmp)
@@ -116,20 +116,20 @@ int lcd_bmp(uchar *logo_bmp)
 		/*
 		 * Decompress bmp image
 		 */
-		len = CFG_VIDEO_LOGO_MAX_SIZE;
-		dst = malloc(CFG_VIDEO_LOGO_MAX_SIZE);
+		len = CONFIG_SYS_VIDEO_LOGO_MAX_SIZE;
+		dst = malloc(CONFIG_SYS_VIDEO_LOGO_MAX_SIZE);
 		if (dst == NULL) {
 			printf("Error: malloc for gunzip failed!\n");
 			return 1;
 		}
-		if (gunzip(dst, CFG_VIDEO_LOGO_MAX_SIZE,
+		if (gunzip(dst, CONFIG_SYS_VIDEO_LOGO_MAX_SIZE,
 			   (uchar *)logo_bmp, &len) != 0) {
 			free(dst);
 			return 1;
 		}
-		if (len == CFG_VIDEO_LOGO_MAX_SIZE) {
+		if (len == CONFIG_SYS_VIDEO_LOGO_MAX_SIZE) {
 			printf("Image could be truncated"
-			       " (increase CFG_VIDEO_LOGO_MAX_SIZE)!\n");
+			       " (increase CONFIG_SYS_VIDEO_LOGO_MAX_SIZE)!\n");
 		}
 
 		/*
diff --git a/board/esd/common/pci.c b/board/esd/common/pci.c
index f711205ef..dcb764cd1 100644
--- a/board/esd/common/pci.c
+++ b/board/esd/common/pci.c
@@ -119,24 +119,24 @@ static void pci_dasa_sim_config_pci9054(struct pci_controller *hose, pci_dev_t d
   /*
    * Configure PLX PCI9054
    */
-  pci_read_config_word(CFG_PCI9054_DEV_FN, PCI_COMMAND, &status);
+  pci_read_config_word(CONFIG_SYS_PCI9054_DEV_FN, PCI_COMMAND, &status);
   status |= PCI_COMMAND_MASTER | PCI_COMMAND_IO | PCI_COMMAND_MEMORY;
-  pci_write_config_word(CFG_PCI9054_DEV_FN, PCI_COMMAND, status);
+  pci_write_config_word(CONFIG_SYS_PCI9054_DEV_FN, PCI_COMMAND, status);
 
   /* Check the latency timer for values >= 0x60.
    */
-  pci_read_config_byte(CFG_PCI9054_DEV_FN, PCI_LATENCY_TIMER, &timer);
+  pci_read_config_byte(CONFIG_SYS_PCI9054_DEV_FN, PCI_LATENCY_TIMER, &timer);
   if (timer < 0x60)
     {
-      pci_write_config_byte(CFG_PCI9054_DEV_FN, PCI_LATENCY_TIMER, 0x60);
+      pci_write_config_byte(CONFIG_SYS_PCI9054_DEV_FN, PCI_LATENCY_TIMER, 0x60);
     }
 
   /* Set I/O base register.
    */
-  pci_write_config_dword(CFG_PCI9054_DEV_FN, PCI_BASE_ADDRESS_0, CFG_PCI9054_IOBASE);
-  pci_read_config_dword(CFG_PCI9054_DEV_FN, PCI_BASE_ADDRESS_0, &iobase);
+  pci_write_config_dword(CONFIG_SYS_PCI9054_DEV_FN, PCI_BASE_ADDRESS_0, CONFIG_SYS_PCI9054_IOBASE);
+  pci_read_config_dword(CONFIG_SYS_PCI9054_DEV_FN, PCI_BASE_ADDRESS_0, &iobase);
 
-  pci9054_iobase = pci_mem_to_phys(CFG_PCI9054_DEV_FN, iobase & PCI_BASE_ADDRESS_MEM_MASK);
+  pci9054_iobase = pci_mem_to_phys(CONFIG_SYS_PCI9054_DEV_FN, iobase & PCI_BASE_ADDRESS_MEM_MASK);
 
   if (pci9054_iobase == 0xffffffff)
     {
@@ -149,13 +149,13 @@ static void pci_dasa_sim_config_pci9054(struct pci_controller *hose, pci_dev_t d
 static struct pci_config_table pci9054_config_table[] = {
 #ifndef CONFIG_PCI_PNP
   { PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
-    PCI_BUS(CFG_ETH_DEV_FN), PCI_DEV(CFG_ETH_DEV_FN), PCI_FUNC(CFG_ETH_DEV_FN),
-    pci_cfgfunc_config_device, { CFG_ETH_IOBASE,
-				 CFG_ETH_IOBASE,
+    PCI_BUS(CONFIG_SYS_ETH_DEV_FN), PCI_DEV(CONFIG_SYS_ETH_DEV_FN), PCI_FUNC(CONFIG_SYS_ETH_DEV_FN),
+    pci_cfgfunc_config_device, { CONFIG_SYS_ETH_IOBASE,
+				 CONFIG_SYS_ETH_IOBASE,
 				 PCI_COMMAND_IO | PCI_COMMAND_MASTER }},
 #ifdef CONFIG_DASA_SIM
   { PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
-    PCI_BUS(CFG_PCI9054_DEV_FN), PCI_DEV(CFG_PCI9054_DEV_FN), PCI_FUNC(CFG_PCI9054_DEV_FN),
+    PCI_BUS(CONFIG_SYS_PCI9054_DEV_FN), PCI_DEV(CONFIG_SYS_PCI9054_DEV_FN), PCI_FUNC(CONFIG_SYS_PCI9054_DEV_FN),
     pci_dasa_sim_config_pci9054 },
 #endif
 #endif
diff --git a/board/esd/common/xilinx_jtag/ports.h b/board/esd/common/xilinx_jtag/ports.h
index 0e389907f..b702fdd9a 100644
--- a/board/esd/common/xilinx_jtag/ports.h
+++ b/board/esd/common/xilinx_jtag/ports.h
@@ -38,12 +38,12 @@
 #define TDI (short) 2
 
 /*
- * Use CFG_FPGA_xxx defines from board include file.
+ * Use CONFIG_SYS_FPGA_xxx defines from board include file.
  */
-#define JTAG_TMS   CFG_FPGA_PRG     /* output */
-#define JTAG_TCK   CFG_FPGA_CLK     /* output */
-#define JTAG_TDI   CFG_FPGA_DATA    /* output */
-#define JTAG_TDO   CFG_FPGA_DONE    /* input */
+#define JTAG_TMS   CONFIG_SYS_FPGA_PRG     /* output */
+#define JTAG_TCK   CONFIG_SYS_FPGA_CLK     /* output */
+#define JTAG_TDI   CONFIG_SYS_FPGA_DATA    /* output */
+#define JTAG_TDO   CONFIG_SYS_FPGA_DONE    /* input */
 
 /* set the port "p" (TCK, TMS, or TDI) to val (0 or 1) */
 void setPort(short p, short val);
diff --git a/board/esd/cpci2dp/cpci2dp.c b/board/esd/cpci2dp/cpci2dp.c
index 54de0b806..dcab9060b 100644
--- a/board/esd/cpci2dp/cpci2dp.c
+++ b/board/esd/cpci2dp/cpci2dp.c
@@ -36,12 +36,12 @@ int board_early_init_f (void)
 	 * Setup GPIO pins
 	 */
 	cntrl0Reg = mfdcr(cntrl0);
-	mtdcr(cntrl0, cntrl0Reg | ((CFG_EEPROM_WP | CFG_PB_LED | CFG_SELF_RST | CFG_INTA_FAKE) << 5));
+	mtdcr(cntrl0, cntrl0Reg | ((CONFIG_SYS_EEPROM_WP | CONFIG_SYS_PB_LED | CONFIG_SYS_SELF_RST | CONFIG_SYS_INTA_FAKE) << 5));
 
 	/* set output pins to high */
-	out32(GPIO0_OR,  CFG_EEPROM_WP);
+	out32(GPIO0_OR,  CONFIG_SYS_EEPROM_WP);
 	/* setup for output (LED=off) */
-	out32(GPIO0_TCR, CFG_EEPROM_WP | CFG_PB_LED);
+	out32(GPIO0_TCR, CONFIG_SYS_EEPROM_WP | CONFIG_SYS_PB_LED);
 
 	/*
 	 * IRQ 0-15  405GP internally generated; active high; level sensitive
@@ -67,13 +67,6 @@ int board_early_init_f (void)
 	return 0;
 }
 
-
-int misc_init_f (void)
-{
-	return 0;  /* dummy implementation */
-}
-
-
 int misc_init_r (void)
 {
 	unsigned long cntrl0Reg;
@@ -115,21 +108,7 @@ int checkboard (void)
 	return 0;
 }
 
-/* ------------------------------------------------------------------------- */
-
-phys_size_t initdram (int board_type)
-{
-	unsigned long val;
-
-	mtdcr(memcfga, mem_mb0cf);
-	val = mfdcr(memcfgd);
-
-	return (4*1024*1024 << ((val & 0x000e0000) >> 17));
-}
-
-/* ------------------------------------------------------------------------- */
-
-#if defined(CFG_EEPROM_WREN)
+#if defined(CONFIG_SYS_EEPROM_WREN)
 /* Input: <dev_addr>  I2C address of EEPROM device to enable.
  *	   <state>     -1: deliver current state
  *		       0: disable write
@@ -139,23 +118,23 @@ phys_size_t initdram (int board_type)
  *		     0/1: current state if <state> was -1.
  */
 int eeprom_write_enable (unsigned dev_addr, int state) {
-	if (CFG_I2C_EEPROM_ADDR != dev_addr) {
+	if (CONFIG_SYS_I2C_EEPROM_ADDR != dev_addr) {
 		return -1;
 	} else {
 		switch (state) {
 		case 1:
 			/* Enable write access, clear bit GPIO_SINT2. */
-			out32(GPIO0_OR, in32(GPIO0_OR) & ~CFG_EEPROM_WP);
+			out32(GPIO0_OR, in32(GPIO0_OR) & ~CONFIG_SYS_EEPROM_WP);
 			state = 0;
 			break;
 		case 0:
 			/* Disable write access, set bit GPIO_SINT2. */
-			out32(GPIO0_OR, in32(GPIO0_OR) | CFG_EEPROM_WP);
+			out32(GPIO0_OR, in32(GPIO0_OR) | CONFIG_SYS_EEPROM_WP);
 			state = 0;
 			break;
 		default:
 			/* Read current status back. */
-			state = (0 == (in32(GPIO0_OR) & CFG_EEPROM_WP));
+			state = (0 == (in32(GPIO0_OR) & CONFIG_SYS_EEPROM_WP));
 			break;
 		}
 	}
@@ -163,7 +142,7 @@ int eeprom_write_enable (unsigned dev_addr, int state) {
 }
 #endif
 
-#if defined(CFG_EEPROM_WREN)
+#if defined(CONFIG_SYS_EEPROM_WREN)
 int do_eep_wren (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 {
 	int query = argc == 1;
@@ -171,21 +150,21 @@ int do_eep_wren (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 
 	if (query) {
 		/* Query write access state. */
-		state = eeprom_write_enable (CFG_I2C_EEPROM_ADDR, -1);
+		state = eeprom_write_enable (CONFIG_SYS_I2C_EEPROM_ADDR, -1);
 		if (state < 0) {
 			puts ("Query of write access state failed.\n");
 		} else {
 			printf ("Write access for device 0x%0x is %sabled.\n",
-				CFG_I2C_EEPROM_ADDR, state ? "en" : "dis");
+				CONFIG_SYS_I2C_EEPROM_ADDR, state ? "en" : "dis");
 			state = 0;
 		}
 	} else {
 		if ('0' == argv[1][0]) {
 			/* Disable write access. */
-			state = eeprom_write_enable (CFG_I2C_EEPROM_ADDR, 0);
+			state = eeprom_write_enable (CONFIG_SYS_I2C_EEPROM_ADDR, 0);
 		} else {
 			/* Enable write access. */
-			state = eeprom_write_enable (CFG_I2C_EEPROM_ADDR, 1);
+			state = eeprom_write_enable (CONFIG_SYS_I2C_EEPROM_ADDR, 1);
 		}
 		if (state < 0) {
 			puts ("Setup of write access state failed.\n");
@@ -200,4 +179,4 @@ U_BOOT_CMD(
 	"eepwren - Enable / disable / query EEPROM write access\n",
 	NULL
 	);
-#endif /* #if defined(CFG_EEPROM_WREN) */
+#endif /* #if defined(CONFIG_SYS_EEPROM_WREN) */
diff --git a/board/esd/cpci2dp/flash.c b/board/esd/cpci2dp/flash.c
index de847f9be..56c822ec9 100644
--- a/board/esd/cpci2dp/flash.c
+++ b/board/esd/cpci2dp/flash.c
@@ -47,7 +47,7 @@ unsigned long flash_init (void)
 	unsigned long base_b0;
 
 	/* Init: no FLASHes known */
-	for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) {
+	for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
 		flash_info[i].flash_id = FLASH_UNKNOWN;
 	}
 
diff --git a/board/esd/cpci2dp/u-boot.lds b/board/esd/cpci2dp/u-boot.lds
index 21547ac27..9697cc6b3 100644
--- a/board/esd/cpci2dp/u-boot.lds
+++ b/board/esd/cpci2dp/u-boot.lds
@@ -72,7 +72,7 @@ SECTIONS
     lib_generic/zlib.o		(.text)
 
 /*    . = env_offset;*/
-/*    common/environment.o(.text)*/
+/*    common/env_embedded.o(.text)*/
 
     *(.text)
     *(.fixup)
@@ -143,6 +143,7 @@ SECTIONS
    *(.dynbss)
    *(.bss)
    *(COMMON)
+   . = ALIGN(4);
   }
   _end = . ;
   PROVIDE (end = .);
diff --git a/board/esd/cpci405/config.mk b/board/esd/cpci405/config.mk
index 0be45c70d..1bdf5e4fc 100644
--- a/board/esd/cpci405/config.mk
+++ b/board/esd/cpci405/config.mk
@@ -21,20 +21,4 @@
 # MA 02111-1307 USA
 #
 
-#
-# esd CPCI405 boards
-#
-
-ifeq ($(BOARD_REVISION),CPCI4052)
-TEXT_BASE = 0xFFFC0000
-else
-ifeq ($(BOARD_REVISION),CPCI405DT)
-TEXT_BASE = 0xFFFC0000
-else
-ifeq ($(BOARD_REVISION),CPCI405AB)
 TEXT_BASE = 0xFFFC0000
-else
-TEXT_BASE = 0xFFFD0000
-endif
-endif
-endif
diff --git a/board/esd/cpci405/cpci405.c b/board/esd/cpci405/cpci405.c
index b856705ff..c5ccb348a 100644
--- a/board/esd/cpci405/cpci405.c
+++ b/board/esd/cpci405/cpci405.c
@@ -110,8 +110,8 @@ int board_early_init_f (void)
 	 * First pull fpga-prg pin low, to disable fpga logic (on version 2 board)
 	 */
 	out32(GPIO0_ODR, 0x00000000);	     /* no open drain pins	*/
-	out32(GPIO0_TCR, CFG_FPGA_PRG);      /* setup for output	*/
-	out32(GPIO0_OR,  CFG_FPGA_PRG);      /* set output pins to high */
+	out32(GPIO0_TCR, CONFIG_SYS_FPGA_PRG);      /* setup for output	*/
+	out32(GPIO0_OR,  CONFIG_SYS_FPGA_PRG);      /* set output pins to high */
 	out32(GPIO0_OR, 0);		     /* pull prg low		*/
 
 	/*
@@ -255,11 +255,6 @@ int cpci405_version(void)
 	}
 }
 
-int misc_init_f (void)
-{
-	return 0;  /* dummy implementation */
-}
-
 int misc_init_r (void)
 {
 	unsigned long cntrl0Reg;
@@ -287,8 +282,8 @@ int misc_init_r (void)
 		cntrl0Reg = mfdcr(cntrl0);
 		mtdcr(cntrl0, cntrl0Reg | 0x00300000);
 
-		dst = malloc(CFG_FPGA_MAX_SIZE);
-		if (gunzip (dst, CFG_FPGA_MAX_SIZE, (uchar *)fpgadata, &len) != 0) {
+		dst = malloc(CONFIG_SYS_FPGA_MAX_SIZE);
+		if (gunzip (dst, CONFIG_SYS_FPGA_MAX_SIZE, (uchar *)fpgadata, &len) != 0) {
 			printf ("GUNZIP ERROR - must RESET board to recover\n");
 			do_reset (NULL, 0, 0, NULL);
 		}
@@ -352,13 +347,13 @@ int misc_init_r (void)
 
 #ifdef CONFIG_CPCI405_6U
 		if (cpci405_version() == 3) {
-			volatile unsigned short *fpga_mode = (unsigned short *)CFG_FPGA_BASE_ADDR;
-			volatile unsigned char *leds = (unsigned char *)CFG_LED_ADDR;
+			volatile unsigned short *fpga_mode = (unsigned short *)CONFIG_SYS_FPGA_BASE_ADDR;
+			volatile unsigned char *leds = (unsigned char *)CONFIG_SYS_LED_ADDR;
 
 			/*
 			 * Enable outputs in fpga on version 3 board
 			 */
-			*fpga_mode |= CFG_FPGA_MODE_ENABLE_OUTPUT;
+			*fpga_mode |= CONFIG_SYS_FPGA_MODE_ENABLE_OUTPUT;
 
 			/*
 			 * Set outputs to 0
@@ -368,9 +363,9 @@ int misc_init_r (void)
 			/*
 			 * Reset external DUART
 			 */
-			*fpga_mode |= CFG_FPGA_MODE_DUART_RESET;
+			*fpga_mode |= CONFIG_SYS_FPGA_MODE_DUART_RESET;
 			udelay(100);
-			*fpga_mode &= ~(CFG_FPGA_MODE_DUART_RESET);
+			*fpga_mode &= ~(CONFIG_SYS_FPGA_MODE_DUART_RESET);
 		}
 #endif
 	}
@@ -450,9 +445,9 @@ int checkboard (void)
 
 #if 0 /* test-only */
 	if (ver >= 2) {
-		volatile u16 *fpga_status = (u16 *)CFG_FPGA_BASE_ADDR + 1;
+		volatile u16 *fpga_status = (u16 *)CONFIG_SYS_FPGA_BASE_ADDR + 1;
 
-		if (*fpga_status & CFG_FPGA_STATUS_FLASH) {
+		if (*fpga_status & CONFIG_SYS_FPGA_STATUS_FLASH) {
 			puts ("FLASH Bank B, ");
 		} else {
 			puts ("FLASH Bank A, ");
@@ -493,18 +488,6 @@ int checkboard (void)
 	return 0;
 }
 
-/* ------------------------------------------------------------------------- */
-
-phys_size_t initdram (int board_type)
-{
-	unsigned long val;
-
-	mtdcr(memcfga, mem_mb0cf);
-	val = mfdcr(memcfgd);
-
-	return (4*1024*1024 << ((val & 0x000e0000) >> 17));
-}
-
 void reset_phy(void)
 {
 #ifdef CONFIG_LXT971_NO_SLEEP
@@ -516,22 +499,20 @@ void reset_phy(void)
 #endif
 }
 
-/* ------------------------------------------------------------------------- */
-
 #ifdef CONFIG_CPCI405_VER2
 #ifdef CONFIG_IDE_RESET
 
 void ide_set_reset(int on)
 {
-	volatile unsigned short *fpga_mode = (unsigned short *)CFG_FPGA_BASE_ADDR;
+	volatile unsigned short *fpga_mode = (unsigned short *)CONFIG_SYS_FPGA_BASE_ADDR;
 
 	/*
 	 * Assert or deassert CompactFlash Reset Pin
 	 */
 	if (on) {		/* assert RESET */
-		*fpga_mode &= ~(CFG_FPGA_MODE_CF_RESET);
+		*fpga_mode &= ~(CONFIG_SYS_FPGA_MODE_CF_RESET);
 	} else {		/* release RESET */
-		*fpga_mode |= CFG_FPGA_MODE_CF_RESET;
+		*fpga_mode |= CONFIG_SYS_FPGA_MODE_CF_RESET;
 	}
 }
 
@@ -574,12 +555,12 @@ int pci_pre_init(struct pci_controller *hose)
 
 #ifdef CONFIG_CPCI405AB
 
-#define ONE_WIRE_CLEAR	 (*(volatile unsigned short *)(CFG_FPGA_BASE_ADDR + CFG_FPGA_MODE) \
-			  |= CFG_FPGA_MODE_1WIRE_DIR)
-#define ONE_WIRE_SET	 (*(volatile unsigned short *)(CFG_FPGA_BASE_ADDR + CFG_FPGA_MODE) \
-			  &= ~CFG_FPGA_MODE_1WIRE_DIR)
-#define ONE_WIRE_GET	 (*(volatile unsigned short *)(CFG_FPGA_BASE_ADDR + CFG_FPGA_STATUS) \
-			  & CFG_FPGA_MODE_1WIRE)
+#define ONE_WIRE_CLEAR	 (*(volatile unsigned short *)(CONFIG_SYS_FPGA_BASE_ADDR + CONFIG_SYS_FPGA_MODE) \
+			  |= CONFIG_SYS_FPGA_MODE_1WIRE_DIR)
+#define ONE_WIRE_SET	 (*(volatile unsigned short *)(CONFIG_SYS_FPGA_BASE_ADDR + CONFIG_SYS_FPGA_MODE) \
+			  &= ~CONFIG_SYS_FPGA_MODE_1WIRE_DIR)
+#define ONE_WIRE_GET	 (*(volatile unsigned short *)(CONFIG_SYS_FPGA_BASE_ADDR + CONFIG_SYS_FPGA_STATUS) \
+			  & CONFIG_SYS_FPGA_MODE_1WIRE)
 
 /*
  * Generate a 1-wire reset, return 1 if no presence detect was found,
@@ -709,8 +690,8 @@ U_BOOT_CMD(
 	NULL
 	);
 
-#define CFG_I2C_EEPROM_ADDR_2	0x51	/* EEPROM CAT28WC32		*/
-#define CFG_ENV_SIZE_2	0x800	/* 2048 bytes may be used for env vars*/
+#define CONFIG_SYS_I2C_EEPROM_ADDR_2	0x51	/* EEPROM CAT28WC32		*/
+#define CONFIG_ENV_SIZE_2	0x800	/* 2048 bytes may be used for env vars*/
 
 /*
  * Write backplane ip-address...
@@ -724,11 +705,11 @@ int do_get_bpip(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 	char *ptr;
 	IPaddr_t ipaddr;
 
-	buf = malloc(CFG_ENV_SIZE_2);
-	if (eeprom_read(CFG_I2C_EEPROM_ADDR_2, 0, (uchar *)buf, CFG_ENV_SIZE_2)) {
+	buf = malloc(CONFIG_ENV_SIZE_2);
+	if (eeprom_read(CONFIG_SYS_I2C_EEPROM_ADDR_2, 0, (uchar *)buf, CONFIG_ENV_SIZE_2)) {
 		puts("\nError reading backplane EEPROM!\n");
 	} else {
-		crc = crc32(0, (uchar *)(buf+4), CFG_ENV_SIZE_2-4);
+		crc = crc32(0, (uchar *)(buf+4), CONFIG_ENV_SIZE_2-4);
 		if (crc != *(ulong *)buf) {
 			printf("ERROR: crc mismatch %08lx %08lx\n", crc, *(ulong *)buf);
 			return -1;
@@ -783,14 +764,14 @@ int do_set_bpip(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 	}
 
 	printf("Setting bp_ip to %s\n", argv[1]);
-	buf = malloc(CFG_ENV_SIZE_2);
-	memset(buf, 0, CFG_ENV_SIZE_2);
+	buf = malloc(CONFIG_ENV_SIZE_2);
+	memset(buf, 0, CONFIG_ENV_SIZE_2);
 	sprintf(str, "bp_ip=%s", argv[1]);
 	strcpy(buf+4, str);
-	crc = crc32(0, (uchar *)(buf+4), CFG_ENV_SIZE_2-4);
+	crc = crc32(0, (uchar *)(buf+4), CONFIG_ENV_SIZE_2-4);
 	*(ulong *)buf = crc;
 
-	if (eeprom_write(CFG_I2C_EEPROM_ADDR_2, 0, (uchar *)buf, CFG_ENV_SIZE_2)) {
+	if (eeprom_write(CONFIG_SYS_I2C_EEPROM_ADDR_2, 0, (uchar *)buf, CONFIG_ENV_SIZE_2)) {
 		puts("\nError writing backplane EEPROM!\n");
 	}
 
diff --git a/board/esd/cpci405/flash.c b/board/esd/cpci405/flash.c
index e766895bb..d535924f8 100644
--- a/board/esd/cpci405/flash.c
+++ b/board/esd/cpci405/flash.c
@@ -66,7 +66,7 @@ unsigned long flash_init (void)
 	unsigned long base_b0, base_b1;
 
 	/* Init: no FLASHes known */
-	for (i = 0; i < CFG_MAX_FLASH_BANKS; ++i) {
+	for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
 		flash_info[i].flash_id = FLASH_UNKNOWN;
 	}
 
diff --git a/board/esd/cpci405/u-boot.lds b/board/esd/cpci405/u-boot.lds
index 21547ac27..5d5976167 100644
--- a/board/esd/cpci405/u-boot.lds
+++ b/board/esd/cpci405/u-boot.lds
@@ -57,22 +57,7 @@ SECTIONS
   .plt : { *(.plt) }
   .text      :
   {
-    /* WARNING - the following is hand-optimized to fit within	*/
-    /* the sector layout of our flash chips!	XXX FIXME XXX	*/
-
     cpu/ppc4xx/start.o	(.text)
-    cpu/ppc4xx/traps.o	(.text)
-    cpu/ppc4xx/interrupts.o	(.text)
-    cpu/ppc4xx/4xx_uart.o	(.text)
-    cpu/ppc4xx/cpu_init.o	(.text)
-    cpu/ppc4xx/speed.o	(.text)
-    common/dlmalloc.o	(.text)
-    lib_generic/crc32.o		(.text)
-    lib_ppc/extable.o	(.text)
-    lib_generic/zlib.o		(.text)
-
-/*    . = env_offset;*/
-/*    common/environment.o(.text)*/
 
     *(.text)
     *(.fixup)
@@ -143,6 +128,7 @@ SECTIONS
    *(.dynbss)
    *(.bss)
    *(COMMON)
+   . = ALIGN(4);
   }
   _end = . ;
   PROVIDE (end = .);
diff --git a/board/esd/cpci5200/cpci5200.c b/board/esd/cpci5200/cpci5200.c
index 20130acfe..6eedb83ff 100644
--- a/board/esd/cpci5200/cpci5200.c
+++ b/board/esd/cpci5200/cpci5200.c
@@ -32,6 +32,7 @@
 #include <mpc5xxx.h>
 #include <pci.h>
 #include <command.h>
+#include <netdev.h>
 
 #include "mt46v16m16-75.h"
 
@@ -80,7 +81,7 @@ static void sdram_start(int hi_addr)
 
 /*
  * ATTENTION: Although partially referenced initdram does NOT make real use
- *            use of CFG_SDRAM_BASE. The code does not work if CFG_SDRAM_BASE
+ *            use of CONFIG_SYS_SDRAM_BASE. The code does not work if CONFIG_SYS_SDRAM_BASE
  *            is something else than 0x00000000.
  */
 
@@ -105,9 +106,9 @@ phys_size_t initdram(int board_type)
 
 	/* find RAM size using SDRAM CS0 only */
 	sdram_start(0);
-	test1 = get_ram_size((long *) CFG_SDRAM_BASE, 0x80000000);
+	test1 = get_ram_size((long *) CONFIG_SYS_SDRAM_BASE, 0x80000000);
 	sdram_start(1);
-	test2 = get_ram_size((long *) CFG_SDRAM_BASE, 0x80000000);
+	test2 = get_ram_size((long *) CONFIG_SYS_SDRAM_BASE, 0x80000000);
 
 	if (test1 > test2) {
 		sdram_start(0);
@@ -143,9 +144,9 @@ phys_size_t initdram(int board_type)
 #if 0
 	/* find RAM size using SDRAM CS1 only */
 	sdram_start(0);
-	get_ram_size((ulong *) (CFG_SDRAM_BASE + dramsize), 0x80000000);
+	get_ram_size((ulong *) (CONFIG_SYS_SDRAM_BASE + dramsize), 0x80000000);
 	sdram_start(1);
-	get_ram_size((ulong *) (CFG_SDRAM_BASE + dramsize), 0x80000000);
+	get_ram_size((ulong *) (CONFIG_SYS_SDRAM_BASE + dramsize), 0x80000000);
 	sdram_start(0);
 #endif
 	/* set SDRAM CS1 size according to the amount of RAM found */
@@ -179,10 +180,10 @@ void flash_afterinit(ulong size)
 		/* adjust mapping */
 		*(vu_long *) MPC5XXX_BOOTCS_START =
 		    *(vu_long *) MPC5XXX_CS0_START =
-		    START_REG(CFG_BOOTCS_START | size);
+		    START_REG(CONFIG_SYS_BOOTCS_START | size);
 		*(vu_long *) MPC5XXX_BOOTCS_STOP =
 		    *(vu_long *) MPC5XXX_CS0_STOP =
-		    STOP_REG(CFG_BOOTCS_START | size, size);
+		    STOP_REG(CONFIG_SYS_BOOTCS_START | size, size);
 	}
 }
 
@@ -259,6 +260,11 @@ void init_ata_reset(void)
 	}
 }
 
+int board_eth_init(bd_t *bis)
+{
+	return pci_eth_init(bis);
+}
+
 int do_writepci(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
 {
 	unsigned int addr;
diff --git a/board/esd/cpci5200/strataflash.c b/board/esd/cpci5200/strataflash.c
index d76af02db..9b578b5f5 100644
--- a/board/esd/cpci5200/strataflash.c
+++ b/board/esd/cpci5200/strataflash.c
@@ -102,7 +102,7 @@ typedef union {
 
 #define NUM_ERASE_REGIONS 4
 
-flash_info_t flash_info[CFG_MAX_FLASH_BANKS];	/* info for FLASH chips        */
+flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];	/* info for FLASH chips        */
 
 /*-----------------------------------------------------------------------
  * Functions
@@ -121,7 +121,7 @@ static int flash_write_cfiword(flash_info_t * info, ulong dest,
 			       cfiword_t cword);
 static int flash_full_status_check(flash_info_t * info, ulong sector,
 				   ulong tout, char *prompt);
-#ifdef CFG_FLASH_USE_BUFFER_WRITE
+#ifdef CONFIG_SYS_FLASH_USE_BUFFER_WRITE
 static int flash_write_cfibuffer(flash_info_t * info, ulong dest, uchar * cp,
 				 int len);
 #endif
@@ -185,14 +185,14 @@ unsigned long flash_init(void)
 	 *
 	 */
 
-	address = CFG_FLASH_BASE;
+	address = CONFIG_SYS_FLASH_BASE;
 	size = 0;
 
 	/* Init: no FLASHes known */
-	for (i = 0; i < CFG_MAX_FLASH_BANKS; ++i) {
+	for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
 		flash_info[i].flash_id = FLASH_UNKNOWN;
 		size += flash_info[i].size = flash_get_size(address, i);
-		address += CFG_FLASH_INCREMENT;
+		address += CONFIG_SYS_FLASH_INCREMENT;
 		if (flash_info[i].flash_id == FLASH_UNKNOWN) {
 			printf
 			    ("## Unknown FLASH on Bank %d - Size = 0x%08lx = %ld MB\n",
@@ -202,9 +202,9 @@ unsigned long flash_init(void)
 
 #if 0				/* test-only */
 	/* Monitor protection ON by default */
-#if (CFG_MONITOR_BASE >= CFG_FLASH_BASE)
+#if (CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE)
 	for (i = 0;
-	     flash_info[0].start[i] < CFG_MONITOR_BASE + monitor_flash_len - 1;
+	     flash_info[0].start[i] < CONFIG_SYS_MONITOR_BASE + monitor_flash_len - 1;
 	     i++)
 		(void)flash_real_protect(&flash_info[0], i, 1);
 #endif
@@ -326,7 +326,7 @@ int write_buff(flash_info_t * info, uchar * src, ulong addr, ulong cnt)
 			return rc;
 		wp = cp;
 	}
-#ifdef CFG_FLASH_USE_BUFFER_WRITE
+#ifdef CONFIG_SYS_FLASH_USE_BUFFER_WRITE
 	while (cnt >= info->portwidth) {
 		i = info->buffer_size > cnt ? cnt : info->buffer_size;
 		if ((rc = flash_write_cfibuffer(info, wp, src, i)) != ERR_OK)
@@ -347,7 +347,7 @@ int write_buff(flash_info_t * info, uchar * src, ulong addr, ulong cnt)
 		wp += info->portwidth;
 		cnt -= info->portwidth;
 	}
-#endif				/* CFG_FLASH_USE_BUFFER_WRITE */
+#endif				/* CONFIG_SYS_FLASH_USE_BUFFER_WRITE */
 	if (cnt == 0) {
 		return (0);
 	}
@@ -727,7 +727,7 @@ static int flash_write_cfiword(flash_info_t * info, ulong dest, cfiword_t cword)
 	return flash_full_status_check(info, 0, info->write_tout, "write");
 }
 
-#ifdef CFG_FLASH_USE_BUFFER_WRITE
+#ifdef CONFIG_SYS_FLASH_USE_BUFFER_WRITE
 
 /* loop through the sectors from the highest address
  * when the passed address is greater or equal to the sector address
@@ -801,4 +801,4 @@ static int flash_write_cfibuffer(flash_info_t * info, ulong dest, uchar * cp,
 	flash_write_cmd(info, sector, 0, FLASH_CMD_CLEAR_STATUS);
 	return retcode;
 }
-#endif				/* CFG_USE_FLASH_BUFFER_WRITE */
+#endif				/* CONFIG_SYS_USE_FLASH_BUFFER_WRITE */
diff --git a/board/esd/cpci750/cpci750.c b/board/esd/cpci750/cpci750.c
index 5ab76c6b8..70bae60c6 100644
--- a/board/esd/cpci750/cpci750.c
+++ b/board/esd/cpci750/cpci750.c
@@ -125,7 +125,7 @@ extern flash_info_t flash_info[];
 /* ------------------------------------------------------------------------- */
 
 /* this is the current GT register space location */
-/* it starts at CFG_DFL_GT_REGS but moves later to CFG_GT_REGS */
+/* it starts at CONFIG_SYS_DFL_GT_REGS but moves later to CONFIG_SYS_GT_REGS */
 
 /* Unfortunately, we cant change it while we are in flash, so we initialize it
  * to the "final" value. This means that any debug_led calls before
@@ -134,7 +134,7 @@ extern flash_info_t flash_info[];
  */
 
 void board_prebootm_init (void);
-unsigned int INTERNAL_REG_BASE_ADDR = CFG_GT_REGS;
+unsigned int INTERNAL_REG_BASE_ADDR = CONFIG_SYS_GT_REGS;
 int display_mem_map (void);
 
 /* ------------------------------------------------------------------------- */
@@ -197,7 +197,7 @@ static void gt_pci_config (void)
 
 		GT_REG_WRITE (PCI_0_CONFIG_ADDR, BIT31 | val);
 		GT_REG_WRITE (PCI_0_CONFIG_DATA_VIRTUAL_REG,
-			      (stat & 0xffff0000) | CFG_PCI_IDSEL);
+			      (stat & 0xffff0000) | CONFIG_SYS_PCI_IDSEL);
 
 	}
 	if ((GTREGREAD (PCI_1_MODE) & (BIT4 | BIT5)) != 0) {	/*if  PCI-X */
@@ -206,7 +206,7 @@ static void gt_pci_config (void)
 
 		GT_REG_WRITE (PCI_1_CONFIG_ADDR, BIT31 | val);
 		GT_REG_WRITE (PCI_1_CONFIG_DATA_VIRTUAL_REG,
-			      (stat & 0xffff0000) | CFG_PCI_IDSEL);
+			      (stat & 0xffff0000) | CONFIG_SYS_PCI_IDSEL);
 	}
 
 	/* Enable master */
@@ -224,21 +224,21 @@ static void gt_pci_config (void)
 	/* ronen- add write to pci remap registers for 64460.
 	   in 64360 when writing to pci base go and overide remap automaticaly,
 	   in 64460 it doesn't */
-	GT_REG_WRITE (PCI_0_IO_BASE_ADDR, CFG_PCI0_IO_SPACE >> 16);
-	GT_REG_WRITE (PCI_0I_O_ADDRESS_REMAP, CFG_PCI0_IO_SPACE_PCI >> 16);
-	GT_REG_WRITE (PCI_0_IO_SIZE, (CFG_PCI0_IO_SIZE - 1) >> 16);
+	GT_REG_WRITE (PCI_0_IO_BASE_ADDR, CONFIG_SYS_PCI0_IO_SPACE >> 16);
+	GT_REG_WRITE (PCI_0I_O_ADDRESS_REMAP, CONFIG_SYS_PCI0_IO_SPACE_PCI >> 16);
+	GT_REG_WRITE (PCI_0_IO_SIZE, (CONFIG_SYS_PCI0_IO_SIZE - 1) >> 16);
 
-	GT_REG_WRITE (PCI_0_MEMORY0_BASE_ADDR, CFG_PCI0_MEM_BASE >> 16);
-	GT_REG_WRITE (PCI_0MEMORY0_ADDRESS_REMAP, CFG_PCI0_MEM_BASE >> 16);
-	GT_REG_WRITE (PCI_0_MEMORY0_SIZE, (CFG_PCI0_MEM_SIZE - 1) >> 16);
+	GT_REG_WRITE (PCI_0_MEMORY0_BASE_ADDR, CONFIG_SYS_PCI0_MEM_BASE >> 16);
+	GT_REG_WRITE (PCI_0MEMORY0_ADDRESS_REMAP, CONFIG_SYS_PCI0_MEM_BASE >> 16);
+	GT_REG_WRITE (PCI_0_MEMORY0_SIZE, (CONFIG_SYS_PCI0_MEM_SIZE - 1) >> 16);
 
-	GT_REG_WRITE (PCI_1_IO_BASE_ADDR, CFG_PCI1_IO_SPACE >> 16);
-	GT_REG_WRITE (PCI_1I_O_ADDRESS_REMAP, CFG_PCI1_IO_SPACE_PCI >> 16);
-	GT_REG_WRITE (PCI_1_IO_SIZE, (CFG_PCI1_IO_SIZE - 1) >> 16);
+	GT_REG_WRITE (PCI_1_IO_BASE_ADDR, CONFIG_SYS_PCI1_IO_SPACE >> 16);
+	GT_REG_WRITE (PCI_1I_O_ADDRESS_REMAP, CONFIG_SYS_PCI1_IO_SPACE_PCI >> 16);
+	GT_REG_WRITE (PCI_1_IO_SIZE, (CONFIG_SYS_PCI1_IO_SIZE - 1) >> 16);
 
-	GT_REG_WRITE (PCI_1_MEMORY0_BASE_ADDR, CFG_PCI1_MEM_BASE >> 16);
-	GT_REG_WRITE (PCI_1MEMORY0_ADDRESS_REMAP, CFG_PCI1_MEM_BASE >> 16);
-	GT_REG_WRITE (PCI_1_MEMORY0_SIZE, (CFG_PCI1_MEM_SIZE - 1) >> 16);
+	GT_REG_WRITE (PCI_1_MEMORY0_BASE_ADDR, CONFIG_SYS_PCI1_MEM_BASE >> 16);
+	GT_REG_WRITE (PCI_1MEMORY0_ADDRESS_REMAP, CONFIG_SYS_PCI1_MEM_BASE >> 16);
+	GT_REG_WRITE (PCI_1_MEMORY0_SIZE, (CONFIG_SYS_PCI1_MEM_SIZE - 1) >> 16);
 
 	/* PCI interface settings */
 	/* Timeout set to retry forever */
@@ -254,7 +254,7 @@ static void gt_pci_config (void)
 	for (stat = 0; stat <= PCI_HOST1; stat++)
 		pciWriteConfigReg (stat,
 				   PCI_INTERNAL_REGISTERS_MEMORY_MAPPED_BASE_ADDRESS,
-				   SELF, CFG_GT_REGS);
+				   SELF, CONFIG_SYS_GT_REGS);
 #endif
 
 }
@@ -270,7 +270,7 @@ static void gt_cpu_config (void)
 	tmp = GTREGREAD (CPU_CONFIGURATION);
 
 	/* set the SINGLE_CPU bit  see MV64360 P.399 */
-#ifndef CFG_GT_DUAL_CPU		/* SINGLE_CPU seems to cause JTAG problems */
+#ifndef CONFIG_SYS_GT_DUAL_CPU		/* SINGLE_CPU seems to cause JTAG problems */
 	tmp |= CPU_CONF_SINGLE_CPU;
 #endif
 
@@ -320,7 +320,7 @@ int board_early_init_f (void)
 	 * it last time. (huber)
 	 */
 
-	my_remap_gt_regs (CFG_DFL_GT_REGS, CFG_GT_REGS);
+	my_remap_gt_regs (CONFIG_SYS_DFL_GT_REGS, CONFIG_SYS_GT_REGS);
 
 	/* No PCI in first release of Port To_do: enable it. */
 #ifdef CONFIG_PCI
@@ -364,45 +364,45 @@ int board_early_init_f (void)
 	 * registers to boot from the sram. (device0)
 	 */
 
-	memoryMapDeviceSpace (DEVICE0, CFG_DEV0_SPACE, CFG_DEV0_SIZE);
-	memoryMapDeviceSpace (DEVICE1, CFG_DEV1_SPACE, CFG_DEV1_SIZE);
-	memoryMapDeviceSpace (DEVICE2, CFG_DEV2_SPACE, CFG_DEV2_SIZE);
-	memoryMapDeviceSpace (DEVICE3, CFG_DEV3_SPACE, CFG_DEV3_SIZE);
+	memoryMapDeviceSpace (DEVICE0, CONFIG_SYS_DEV0_SPACE, CONFIG_SYS_DEV0_SIZE);
+	memoryMapDeviceSpace (DEVICE1, CONFIG_SYS_DEV1_SPACE, CONFIG_SYS_DEV1_SIZE);
+	memoryMapDeviceSpace (DEVICE2, CONFIG_SYS_DEV2_SPACE, CONFIG_SYS_DEV2_SIZE);
+	memoryMapDeviceSpace (DEVICE3, CONFIG_SYS_DEV3_SPACE, CONFIG_SYS_DEV3_SIZE);
 
 
 	/* configure device timing */
-	GT_REG_WRITE (DEVICE_BANK0PARAMETERS, CFG_DEV0_PAR);
-	GT_REG_WRITE (DEVICE_BANK1PARAMETERS, CFG_DEV1_PAR);
-	GT_REG_WRITE (DEVICE_BANK2PARAMETERS, CFG_DEV2_PAR);
-	GT_REG_WRITE (DEVICE_BANK3PARAMETERS, CFG_DEV3_PAR);
+	GT_REG_WRITE (DEVICE_BANK0PARAMETERS, CONFIG_SYS_DEV0_PAR);
+	GT_REG_WRITE (DEVICE_BANK1PARAMETERS, CONFIG_SYS_DEV1_PAR);
+	GT_REG_WRITE (DEVICE_BANK2PARAMETERS, CONFIG_SYS_DEV2_PAR);
+	GT_REG_WRITE (DEVICE_BANK3PARAMETERS, CONFIG_SYS_DEV3_PAR);
 
-#ifdef CFG_32BIT_BOOT_PAR	/* set port parameters for Flash device module access */
+#ifdef CONFIG_SYS_32BIT_BOOT_PAR	/* set port parameters for Flash device module access */
 	/* detect if we are booting from the 32 bit flash */
 	if (GTREGREAD (DEVICE_BOOT_BANK_PARAMETERS) & (0x3 << 20)) {
 		/* 32 bit boot flash */
-		GT_REG_WRITE (DEVICE_BANK3PARAMETERS, CFG_8BIT_BOOT_PAR);
+		GT_REG_WRITE (DEVICE_BANK3PARAMETERS, CONFIG_SYS_8BIT_BOOT_PAR);
 		GT_REG_WRITE (DEVICE_BOOT_BANK_PARAMETERS,
-			      CFG_32BIT_BOOT_PAR);
+			      CONFIG_SYS_32BIT_BOOT_PAR);
 	} else {
 		/* 8 bit boot flash */
-		GT_REG_WRITE (DEVICE_BANK3PARAMETERS, CFG_32BIT_BOOT_PAR);
-		GT_REG_WRITE (DEVICE_BOOT_BANK_PARAMETERS, CFG_8BIT_BOOT_PAR);
+		GT_REG_WRITE (DEVICE_BANK3PARAMETERS, CONFIG_SYS_32BIT_BOOT_PAR);
+		GT_REG_WRITE (DEVICE_BOOT_BANK_PARAMETERS, CONFIG_SYS_8BIT_BOOT_PAR);
 	}
 #else
 	/* 8 bit boot flash only */
-/*	GT_REG_WRITE(DEVICE_BOOT_BANK_PARAMETERS, CFG_8BIT_BOOT_PAR);*/
+/*	GT_REG_WRITE(DEVICE_BOOT_BANK_PARAMETERS, CONFIG_SYS_8BIT_BOOT_PAR);*/
 #endif
 
 
 	gt_cpu_config ();
 
 	/* MPP setup */
-	GT_REG_WRITE (MPP_CONTROL0, CFG_MPP_CONTROL_0);
-	GT_REG_WRITE (MPP_CONTROL1, CFG_MPP_CONTROL_1);
-	GT_REG_WRITE (MPP_CONTROL2, CFG_MPP_CONTROL_2);
-	GT_REG_WRITE (MPP_CONTROL3, CFG_MPP_CONTROL_3);
+	GT_REG_WRITE (MPP_CONTROL0, CONFIG_SYS_MPP_CONTROL_0);
+	GT_REG_WRITE (MPP_CONTROL1, CONFIG_SYS_MPP_CONTROL_1);
+	GT_REG_WRITE (MPP_CONTROL2, CONFIG_SYS_MPP_CONTROL_2);
+	GT_REG_WRITE (MPP_CONTROL3, CONFIG_SYS_MPP_CONTROL_3);
 
-	GT_REG_WRITE (GPP_LEVEL_CONTROL, CFG_GPP_LEVEL_CONTROL);
+	GT_REG_WRITE (GPP_LEVEL_CONTROL, CONFIG_SYS_GPP_LEVEL_CONTROL);
 	DEBUG_LED0_ON ();
 	DEBUG_LED1_ON ();
 	DEBUG_LED2_ON ();
@@ -415,7 +415,7 @@ int board_early_init_f (void)
 int misc_init_r ()
 {
 	icache_enable ();
-#ifdef CFG_L2
+#ifdef CONFIG_SYS_L2
 	l2cache_enable ();
 #endif
 #ifdef CONFIG_MPSC
@@ -428,19 +428,19 @@ int misc_init_r ()
 	/* disable the dcache and MMU */
 	dcache_lock ();
 #endif
-	if (flash_info[3].size < CFG_FLASH_INCREMENT) {
+	if (flash_info[3].size < CONFIG_SYS_FLASH_INCREMENT) {
 		unsigned int flash_offset;
 		unsigned int l;
 
-		flash_offset =  CFG_FLASH_INCREMENT - flash_info[3].size;
-		for (l = 0; l < CFG_MAX_FLASH_SECT; l++) {
+		flash_offset =  CONFIG_SYS_FLASH_INCREMENT - flash_info[3].size;
+		for (l = 0; l < CONFIG_SYS_MAX_FLASH_SECT; l++) {
 			if (flash_info[3].start[l] != 0) {
 			      flash_info[3].start[l] += flash_offset;
 			}
 		}
 		flash_protect (FLAG_PROTECT_SET,
-			       CFG_MONITOR_BASE,
-			       CFG_MONITOR_BASE + monitor_flash_len  - 1,
+			       CONFIG_SYS_MONITOR_BASE,
+			       CONFIG_SYS_MONITOR_BASE + monitor_flash_len  - 1,
 			       &flash_info[3]);
 	}
 	return 0;
@@ -449,7 +449,7 @@ int misc_init_r ()
 void after_reloc (ulong dest_addr, gd_t * gd)
 {
 
-  memoryMapDeviceSpace (BOOT_DEVICE, CFG_BOOT_SPACE, CFG_BOOT_SIZE);
+  memoryMapDeviceSpace (BOOT_DEVICE, CONFIG_SYS_BOOT_SPACE, CONFIG_SYS_BOOT_SIZE);
 
   display_mem_map ();
   /* now, jump to the main ppcboot board init code */
@@ -469,7 +469,7 @@ int checkboard (void)
 {
 	int l_type = 0;
 
-	printf ("BOARD: %s\n", CFG_BOARD_NAME);
+	printf ("BOARD: %s\n", CONFIG_SYS_BOARD_NAME);
 	return (l_type);
 }
 
@@ -540,7 +540,7 @@ int display_mem_map (void)
 
 /* DRAM check routines copied from gw8260 */
 
-#if defined (CFG_DRAM_TEST)
+#if defined (CONFIG_SYS_DRAM_TEST)
 
 /*********************************************************************/
 /* NAME:  move64() -  moves a double word (64-bit)		     */
@@ -571,7 +571,7 @@ static void move64 (unsigned long long *src, unsigned long long *dest)
 }
 
 
-#if defined (CFG_DRAM_TEST_DATA)
+#if defined (CONFIG_SYS_DRAM_TEST_DATA)
 
 unsigned long long pattern[] = {
 	0xaaaaaaaaaaaaaaaaLL,
@@ -634,7 +634,7 @@ unsigned long long pattern[] = {
 /*********************************************************************/
 int mem_test_data (void)
 {
-	unsigned long long *pmem = (unsigned long long *) CFG_MEMTEST_START;
+	unsigned long long *pmem = (unsigned long long *) CONFIG_SYS_MEMTEST_START;
 	unsigned long long temp64 = 0;
 	int num_patterns = sizeof (pattern) / sizeof (pattern[0]);
 	int i;
@@ -661,9 +661,9 @@ int mem_test_data (void)
 
 	return 0;
 }
-#endif /* CFG_DRAM_TEST_DATA */
+#endif /* CONFIG_SYS_DRAM_TEST_DATA */
 
-#if defined (CFG_DRAM_TEST_ADDRESS)
+#if defined (CONFIG_SYS_DRAM_TEST_ADDRESS)
 /*********************************************************************/
 /* NAME:  mem_test_address() -	test address lines		     */
 /*								     */
@@ -688,8 +688,8 @@ int mem_test_data (void)
 int mem_test_address (void)
 {
 	volatile unsigned int *pmem =
-		(volatile unsigned int *) CFG_MEMTEST_START;
-	const unsigned int size = (CFG_MEMTEST_END - CFG_MEMTEST_START) / 4;
+		(volatile unsigned int *) CONFIG_SYS_MEMTEST_START;
+	const unsigned int size = (CONFIG_SYS_MEMTEST_END - CONFIG_SYS_MEMTEST_START) / 4;
 	unsigned int i;
 
 	/* write address to each location */
@@ -706,9 +706,9 @@ int mem_test_address (void)
 	}
 	return 0;
 }
-#endif /* CFG_DRAM_TEST_ADDRESS */
+#endif /* CONFIG_SYS_DRAM_TEST_ADDRESS */
 
-#if defined (CFG_DRAM_TEST_WALK)
+#if defined (CONFIG_SYS_DRAM_TEST_WALK)
 /*********************************************************************/
 /* NAME:   mem_march() -  memory march				     */
 /*								     */
@@ -766,7 +766,7 @@ int mem_march (volatile unsigned long long *base,
 	}
 	return 0;
 }
-#endif /* CFG_DRAM_TEST_WALK */
+#endif /* CONFIG_SYS_DRAM_TEST_WALK */
 
 /*********************************************************************/
 /* NAME:   mem_test_walk() -  a simple walking ones test	     */
@@ -798,8 +798,8 @@ int mem_test_walk (void)
 {
 	unsigned long long mask;
 	volatile unsigned long long *pmem =
-		(volatile unsigned long long *) CFG_MEMTEST_START;
-	const unsigned long size = (CFG_MEMTEST_END - CFG_MEMTEST_START) / 8;
+		(volatile unsigned long long *) CONFIG_SYS_MEMTEST_START;
+	const unsigned long size = (CONFIG_SYS_MEMTEST_END - CONFIG_SYS_MEMTEST_START) / 8;
 
 	unsigned int i;
 
@@ -865,23 +865,23 @@ int testdram (void)
 	int runaddress = 0;
 	int runwalk    = 0;
 
-#ifdef CFG_DRAM_TEST_DATA
+#ifdef CONFIG_SYS_DRAM_TEST_DATA
 	s = getenv ("testdramdata");
 	rundata = (s && (*s == 'y')) ? 1 : 0;
 #endif
-#ifdef CFG_DRAM_TEST_ADDRESS
+#ifdef CONFIG_SYS_DRAM_TEST_ADDRESS
 	s = getenv ("testdramaddress");
 	runaddress = (s && (*s == 'y')) ? 1 : 0;
 #endif
-#ifdef CFG_DRAM_TEST_WALK
+#ifdef CONFIG_SYS_DRAM_TEST_WALK
 	s = getenv ("testdramwalk");
 	runwalk = (s && (*s == 'y')) ? 1 : 0;
 #endif
 
 	if ((rundata == 1) || (runaddress == 1) || (runwalk == 1)) {
-		printf ("Testing RAM from 0x%08x to 0x%08x ...  (don't panic... that will take a moment !!!!)\n", CFG_MEMTEST_START, CFG_MEMTEST_END);
+		printf ("Testing RAM from 0x%08x to 0x%08x ...  (don't panic... that will take a moment !!!!)\n", CONFIG_SYS_MEMTEST_START, CONFIG_SYS_MEMTEST_END);
 	}
-#ifdef CFG_DRAM_TEST_DATA
+#ifdef CONFIG_SYS_DRAM_TEST_DATA
 	if (rundata == 1) {
 		printf ("Test DATA ...  ");
 		if (mem_test_data () == 1) {
@@ -891,7 +891,7 @@ int testdram (void)
 			printf ("ok \n");
 	}
 #endif
-#ifdef CFG_DRAM_TEST_ADDRESS
+#ifdef CONFIG_SYS_DRAM_TEST_ADDRESS
 	if (runaddress == 1) {
 		printf ("Test ADDRESS ...  ");
 		if (mem_test_address () == 1) {
@@ -901,7 +901,7 @@ int testdram (void)
 			printf ("ok \n");
 	}
 #endif
-#ifdef CFG_DRAM_TEST_WALK
+#ifdef CONFIG_SYS_DRAM_TEST_WALK
 	if (runwalk == 1) {
 		printf ("Test WALKING ONEs ...  ");
 		if (mem_test_walk () == 1) {
@@ -917,7 +917,7 @@ int testdram (void)
 	return 0;
 
 }
-#endif /* CFG_DRAM_TEST */
+#endif /* CONFIG_SYS_DRAM_TEST */
 
 /* ronen - the below functions are used by the bootm function		*/
 /*  - we map the base register to fbe00000 (same mapping as in the LSP) */
@@ -956,7 +956,7 @@ void board_prebootm_init ()
 /*      GV_REG_WRITE (MV64360_ETH_RECEIVE_QUEUE_COMMAND_REG (2), 0x0000ff00); */
 
 /* Relocate MV64360 internal regs */
-	my_remap_gt_regs_bootm (CFG_GT_REGS, CFG_DFL_GT_REGS);
+	my_remap_gt_regs_bootm (CONFIG_SYS_GT_REGS, CONFIG_SYS_DFL_GT_REGS);
 
 	icache_disable ();
 	dcache_disable ();
diff --git a/board/esd/cpci750/i2c.c b/board/esd/cpci750/i2c.c
index 5b1bc01c2..d95567f7d 100644
--- a/board/esd/cpci750/i2c.c
+++ b/board/esd/cpci750/i2c.c
@@ -46,7 +46,7 @@ static void i2c_init (int speed, int slaveaddr)
 	unsigned int n, m, freq, margin, power;
 	unsigned int actualN = 0, actualM = 0;
 	unsigned int minMargin = 0xffffffff;
-	unsigned int tclk = CFG_TCLK;
+	unsigned int tclk = CONFIG_SYS_TCLK;
 	unsigned int i2cFreq = speed;	/* 100000 max. Fast mode not supported */
 
 	DP (puts ("i2c_init\n"));
@@ -380,7 +380,7 @@ i2c_read (uchar dev_addr, unsigned int offset, int alen, uchar * data,
 	  int len)
 {
 	uchar status = 0;
-	unsigned int i2cFreq = CFG_I2C_SPEED;
+	unsigned int i2cFreq = CONFIG_SYS_I2C_SPEED;
 
 	DP (puts ("i2c_read\n"));
 
@@ -428,7 +428,7 @@ i2c_write (uchar dev_addr, unsigned int offset, int alen, uchar * data,
 	   int len)
 {
 	uchar status = 0;
-	unsigned int i2cFreq = CFG_I2C_SPEED;
+	unsigned int i2cFreq = CONFIG_SYS_I2C_SPEED;
 
 	DP (puts ("i2c_write\n"));
 
@@ -464,7 +464,7 @@ int i2c_probe (uchar chip)
 	unsigned int i2c_status;
 #endif
 	uchar status = 0;
-	unsigned int i2cFreq = CFG_I2C_SPEED;
+	unsigned int i2cFreq = CONFIG_SYS_I2C_SPEED;
 
 	DP (puts ("i2c_probe\n"));
 
diff --git a/board/esd/cpci750/ide.c b/board/esd/cpci750/ide.c
index 0adafe2d0..9bdc52345 100644
--- a/board/esd/cpci750/ide.c
+++ b/board/esd/cpci750/ide.c
@@ -30,7 +30,7 @@
 #include <ide.h>
 #include <pci.h>
 
-extern ulong ide_bus_offset[CFG_IDE_MAXBUS];
+extern ulong ide_bus_offset[CONFIG_SYS_IDE_MAXBUS];
 
 int ide_preinit (void)
 {
@@ -39,7 +39,7 @@ int ide_preinit (void)
 	int l;
 
 	status = 1;
-	for (l = 0; l < CFG_IDE_MAXBUS; l++) {
+	for (l = 0; l < CONFIG_SYS_IDE_MAXBUS; l++) {
 		ide_bus_offset[l] = -ATA_STATUS;
 	}
 	devbusfn = pci_find_device (0x1103, 0x0004, 0);
@@ -51,11 +51,11 @@ int ide_preinit (void)
 		pci_read_config_dword (devbusfn, PCI_BASE_ADDRESS_0,
 				       (u32 *) & ide_bus_offset[0]);
 		ide_bus_offset[0] &= 0xfffffffe;
-		ide_bus_offset[0] += CFG_PCI0_IO_SPACE;
+		ide_bus_offset[0] += CONFIG_SYS_PCI0_IO_SPACE;
 		pci_read_config_dword (devbusfn, PCI_BASE_ADDRESS_2,
 				       (u32 *) & ide_bus_offset[1]);
 		ide_bus_offset[1] &= 0xfffffffe;
-		ide_bus_offset[1] += CFG_PCI0_IO_SPACE;
+		ide_bus_offset[1] += CONFIG_SYS_PCI0_IO_SPACE;
 	}
 	return (status);
 }
diff --git a/board/esd/cpci750/local.h b/board/esd/cpci750/local.h
index bca0e1ff5..de3758a51 100644
--- a/board/esd/cpci750/local.h
+++ b/board/esd/cpci750/local.h
@@ -48,7 +48,7 @@
 /* #define CONFIG_BOOTCOMMAND */
 /* #define CONFIG_RAMBOOTCOMMAND */
 /* #define CONFIG_NFSBOOTCOMMAND */
-/* #define CFG_AUTOLOAD */
+/* #define CONFIG_SYS_AUTOLOAD */
 /* #define CONFIG_PREBOOT */
 
 /* These don't */
diff --git a/board/esd/cpci750/misc.S b/board/esd/cpci750/misc.S
index 160b1d31f..233fd83bc 100644
--- a/board/esd/cpci750/misc.S
+++ b/board/esd/cpci750/misc.S
@@ -16,7 +16,7 @@
 board_relocate_rom:
 	mflr	r7
 	/* update the location of the GT registers */
-	lis	r11, CFG_GT_REGS@h
+	lis	r11, CONFIG_SYS_GT_REGS@h
 	/* if we're using ECC, we must use the DMA engine to copy ourselves */
 	bl	start_idma_transfer_0
 	bl	wait_for_idma_0
@@ -29,12 +29,12 @@ board_relocate_rom:
 board_init_ecc:
 	mflr	r7
 	/* NOTE: r10 still contains the location we've been relocated to
-	 * which happens to be TOP_OF_RAM - CFG_MONITOR_LEN */
+	 * which happens to be TOP_OF_RAM - CONFIG_SYS_MONITOR_LEN */
 
 	/* now that we're running from ram, init the rest of main memory
 	 * for ECC use */
-	lis	r8, CFG_MONITOR_LEN@h
-	ori	r8, r8, CFG_MONITOR_LEN@l
+	lis	r8, CONFIG_SYS_MONITOR_LEN@h
+	ori	r8, r8, CONFIG_SYS_MONITOR_LEN@l
 
 	divw	r3, r10, r8
 
@@ -120,15 +120,15 @@ stop_idma_engine_0:
 	blr
 #endif
 
-#ifdef CFG_BOARD_ASM_INIT
+#ifdef CONFIG_SYS_BOARD_ASM_INIT
 	/* NOTE: trashes r3-r7 */
 	.globl board_asm_init
 board_asm_init:
 	/* just move the GT registers to where they belong */
-	lis	r3, CFG_DFL_GT_REGS@h
-	ori	r3, r3, CFG_DFL_GT_REGS@l
-	lis	r4, CFG_GT_REGS@h
-	ori	r4, r4, CFG_GT_REGS@l
+	lis	r3, CONFIG_SYS_DFL_GT_REGS@h
+	ori	r3, r3, CONFIG_SYS_DFL_GT_REGS@l
+	lis	r4, CONFIG_SYS_GT_REGS@h
+	ori	r4, r4, CONFIG_SYS_GT_REGS@l
 	li	r5, INTERNAL_SPACE_DECODE
 
 	/* test to see if we've already moved */
@@ -153,11 +153,11 @@ board_asm_init:
 	cmp	cr0, r7, r6
 	bne	1b
 
-	lis	r3, CFG_INT_SRAM_BASE@h
-	ori	r3, r3, CFG_INT_SRAM_BASE@l
+	lis	r3, CONFIG_SYS_INT_SRAM_BASE@h
+	ori	r3, r3, CONFIG_SYS_INT_SRAM_BASE@l
 	rlwinm  r3, r3, 16, 16, 31
-	lis	r4, CFG_GT_REGS@h
-	ori	r4, r4, CFG_GT_REGS@l
+	lis	r4, CONFIG_SYS_GT_REGS@h
+	ori	r4, r4, CONFIG_SYS_GT_REGS@l
 	li	r5, INTEGRATED_SRAM_BASE_ADDR
 	stwbrx  r3, r5, r4
 
diff --git a/board/esd/cpci750/mpsc.c b/board/esd/cpci750/mpsc.c
index fa8d3bda9..c89426d08 100644
--- a/board/esd/cpci750/mpsc.c
+++ b/board/esd/cpci750/mpsc.c
@@ -427,7 +427,7 @@ void mpsc_sdma_init (void)
 			  (MV64360_CUNIT_BASE_ADDR_WIN_0_BIT * 2)));
 
 /* Setup MPSC internal address space base address	*/
-	GT_REG_WRITE (CUNIT_INTERNAL_SPACE_BASE_ADDR_REG, CFG_GT_REGS);
+	GT_REG_WRITE (CUNIT_INTERNAL_SPACE_BASE_ADDR_REG, CONFIG_SYS_GT_REGS);
 
 /* no high address remap*/
 	GT_REG_WRITE (CUNIT_HIGH_ADDR_REMAP_REG0, 0x00);
@@ -517,9 +517,9 @@ int galbrg_set_baudrate (int channel, int rate)
 
 #ifdef ZUMA_NTL
 	/* from tclk */
-	clock = (CFG_TCLK / (16 * rate)) - 1;
+	clock = (CONFIG_SYS_TCLK / (16 * rate)) - 1;
 #else
-	clock = (CFG_TCLK / (16 * rate)) - 1;
+	clock = (CONFIG_SYS_TCLK / (16 * rate)) - 1;
 #endif
 
 	galbrg_set_CDV (channel, clock);	/* set timer Reg. for BRG */
diff --git a/board/esd/cpci750/pci.c b/board/esd/cpci750/pci.c
index c335ebf0b..bfc7e555b 100644
--- a/board/esd/cpci750/pci.c
+++ b/board/esd/cpci750/pci.c
@@ -66,13 +66,13 @@ static void gt_pci_bus_mode_display (PCI_HOST host)
 		printf ("PCI %d bus mode: Conventional PCI\n", host);
 		break;
 	case 1:
-		printf ("PCI %d bus mode: 66 Mhz PCIX\n", host);
+		printf ("PCI %d bus mode: 66 MHz PCIX\n", host);
 		break;
 	case 2:
-		printf ("PCI %d bus mode: 100 Mhz PCIX\n", host);
+		printf ("PCI %d bus mode: 100 MHz PCIX\n", host);
 		break;
 	case 3:
-		printf ("PCI %d bus mode: 133 Mhz PCIX\n", host);
+		printf ("PCI %d bus mode: 133 MHz PCIX\n", host);
 		break;
 	default:
 		printf ("Unknown BUS %d\n", mode);
@@ -932,14 +932,14 @@ void pci_init_board (void)
 
 	/* PCI memory space */
 	pci_set_region (pci0_hose.regions + 0,
-			CFG_PCI0_0_MEM_SPACE,
-			CFG_PCI0_0_MEM_SPACE,
-			CFG_PCI0_MEM_SIZE, PCI_REGION_MEM);
+			CONFIG_SYS_PCI0_0_MEM_SPACE,
+			CONFIG_SYS_PCI0_0_MEM_SPACE,
+			CONFIG_SYS_PCI0_MEM_SIZE, PCI_REGION_MEM);
 
 	/* PCI I/O space */
 	pci_set_region (pci0_hose.regions + 1,
-			CFG_PCI0_IO_SPACE_PCI,
-			CFG_PCI0_IO_SPACE, CFG_PCI0_IO_SIZE, PCI_REGION_IO);
+			CONFIG_SYS_PCI0_IO_SPACE_PCI,
+			CONFIG_SYS_PCI0_IO_SPACE, CONFIG_SYS_PCI0_IO_SIZE, PCI_REGION_IO);
 
 	pci_set_ops (&pci0_hose,
 		     pci_hose_read_config_byte_via_dword,
@@ -981,14 +981,14 @@ void pci_init_board (void)
 
 	/* PCI memory space */
 	pci_set_region (pci1_hose.regions + 0,
-			CFG_PCI1_0_MEM_SPACE,
-			CFG_PCI1_0_MEM_SPACE,
-			CFG_PCI1_MEM_SIZE, PCI_REGION_MEM);
+			CONFIG_SYS_PCI1_0_MEM_SPACE,
+			CONFIG_SYS_PCI1_0_MEM_SPACE,
+			CONFIG_SYS_PCI1_MEM_SIZE, PCI_REGION_MEM);
 
 	/* PCI I/O space */
 	pci_set_region (pci1_hose.regions + 1,
-			CFG_PCI1_IO_SPACE_PCI,
-			CFG_PCI1_IO_SPACE, CFG_PCI1_IO_SIZE, PCI_REGION_IO);
+			CONFIG_SYS_PCI1_IO_SPACE_PCI,
+			CONFIG_SYS_PCI1_IO_SPACE, CONFIG_SYS_PCI1_IO_SIZE, PCI_REGION_IO);
 
 	pci_set_ops (&pci1_hose,
 		     pci_hose_read_config_byte_via_dword,
diff --git a/board/esd/cpci750/sdram_init.c b/board/esd/cpci750/sdram_init.c
index 0291937e0..4c03630fb 100644
--- a/board/esd/cpci750/sdram_init.c
+++ b/board/esd/cpci750/sdram_init.c
@@ -350,7 +350,7 @@ static int check_dimm (uchar slot, AUX_MEM_DIMM_INFO * dimmInfo)
 	} else
 		dimmInfo->slot = slot;	/* start to fill up dimminfo for this "slot" */
 
-#ifdef CFG_DISPLAY_DIMM_SPD_CONTENT
+#ifdef CONFIG_SYS_DISPLAY_DIMM_SPD_CONTENT
 
 	for (i = 0; i <= 127; i++) {
 		printf ("SPD-EEPROM Byte %3d = %3x (%3d)\n", i, data[i],
@@ -1656,13 +1656,13 @@ initdram(int board_type)
 	if (dimmInfo2.numOfModuleBanks > 2)
 		printf("Error, SPD claims DIMM2 has >2 banks\n");
 
-	for (bank_no = 0; bank_no < CFG_DRAM_BANKS; bank_no++) {
+	for (bank_no = 0; bank_no < CONFIG_SYS_DRAM_BANKS; bank_no++) {
 		/* skip over banks that are not populated */
 		if (! checkbank[bank_no])
 			continue;
 
-		if ((total + check) > CFG_GT_REGS)
-			check = CFG_GT_REGS - total;
+		if ((total + check) > CONFIG_SYS_GT_REGS)
+			check = CONFIG_SYS_GT_REGS - total;
 
 		memory_map_bank(bank_no, total, check);
 		realsize = dram_size((long int *)total, check);
diff --git a/board/esd/cpci750/u-boot.lds b/board/esd/cpci750/u-boot.lds
index 1a95755ab..ff2d8b7fe 100644
--- a/board/esd/cpci750/u-boot.lds
+++ b/board/esd/cpci750/u-boot.lds
@@ -60,7 +60,7 @@ SECTIONS
 
 /* store the environment in a seperate sector in the boot flash */
 /*    . = env_offset; */
-/*    common/environment.o(.text) */
+/*    common/env_embedded.o(.text) */
 
     *(.text)
     *(.fixup)
@@ -131,6 +131,7 @@ SECTIONS
    *(.dynbss)
    *(.bss)
    *(COMMON)
+   . = ALIGN(4);
   }
   _end = . ;
   PROVIDE (end = .);
diff --git a/board/esd/cpciiser4/cpciiser4.c b/board/esd/cpciiser4/cpciiser4.c
index 204117edf..b5d25433f 100644
--- a/board/esd/cpciiser4/cpciiser4.c
+++ b/board/esd/cpciiser4/cpciiser4.c
@@ -183,22 +183,3 @@ int checkboard (void)
 
 	return 0;
 }
-
-/* ------------------------------------------------------------------------- */
-
-phys_size_t initdram (int board_type)
-{
-	return (16 * 1024 * 1024);
-}
-
-/* ------------------------------------------------------------------------- */
-
-int testdram (void)
-{
-	/* TODO: XXX XXX XXX */
-	printf ("test: 16 MB - ok\n");
-
-	return (0);
-}
-
-/* ------------------------------------------------------------------------- */
diff --git a/board/esd/cpciiser4/flash.c b/board/esd/cpciiser4/flash.c
index de847f9be..56c822ec9 100644
--- a/board/esd/cpciiser4/flash.c
+++ b/board/esd/cpciiser4/flash.c
@@ -47,7 +47,7 @@ unsigned long flash_init (void)
 	unsigned long base_b0;
 
 	/* Init: no FLASHes known */
-	for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) {
+	for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
 		flash_info[i].flash_id = FLASH_UNKNOWN;
 	}
 
diff --git a/board/esd/cpciiser4/u-boot.lds b/board/esd/cpciiser4/u-boot.lds
index 21547ac27..9697cc6b3 100644
--- a/board/esd/cpciiser4/u-boot.lds
+++ b/board/esd/cpciiser4/u-boot.lds
@@ -72,7 +72,7 @@ SECTIONS
     lib_generic/zlib.o		(.text)
 
 /*    . = env_offset;*/
-/*    common/environment.o(.text)*/
+/*    common/env_embedded.o(.text)*/
 
     *(.text)
     *(.fixup)
@@ -143,6 +143,7 @@ SECTIONS
    *(.dynbss)
    *(.bss)
    *(COMMON)
+   . = ALIGN(4);
   }
   _end = . ;
   PROVIDE (end = .);
diff --git a/board/esd/dasa_sim/cmd_dasa_sim.c b/board/esd/dasa_sim/cmd_dasa_sim.c
index 89a4aaf80..36dd58c3e 100644
--- a/board/esd/dasa_sim/cmd_dasa_sim.c
+++ b/board/esd/dasa_sim/cmd_dasa_sim.c
@@ -48,13 +48,13 @@ static unsigned int PciEepromReadLongVPD (int offs)
 	unsigned int ret;
 	int count;
 
-	pci_write_config_dword (CFG_PCI9054_DEV_FN, 0x4c,
+	pci_write_config_dword (CONFIG_SYS_PCI9054_DEV_FN, 0x4c,
 				(offs << 16) | 0x0003);
 	count = 0;
 
 	for (;;) {
 		udelay (10 * 1000);
-		pci_read_config_dword (CFG_PCI9054_DEV_FN, 0x4c, &ret);
+		pci_read_config_dword (CONFIG_SYS_PCI9054_DEV_FN, 0x4c, &ret);
 		if ((ret & 0x80000000) != 0) {
 			break;
 		} else {
@@ -66,7 +66,7 @@ static unsigned int PciEepromReadLongVPD (int offs)
 		}
 	}
 
-	pci_read_config_dword (CFG_PCI9054_DEV_FN, 0x50, &value);
+	pci_read_config_dword (CONFIG_SYS_PCI9054_DEV_FN, 0x50, &value);
 
 	return value;
 }
@@ -77,14 +77,14 @@ static int PciEepromWriteLongVPD (int offs, unsigned int value)
 	unsigned int ret;
 	int count;
 
-	pci_write_config_dword (CFG_PCI9054_DEV_FN, 0x50, value);
-	pci_write_config_dword (CFG_PCI9054_DEV_FN, 0x4c,
+	pci_write_config_dword (CONFIG_SYS_PCI9054_DEV_FN, 0x50, value);
+	pci_write_config_dword (CONFIG_SYS_PCI9054_DEV_FN, 0x4c,
 				(offs << 16) | 0x80000003);
 	count = 0;
 
 	for (;;) {
 		udelay (10 * 1000);
-		pci_read_config_dword (CFG_PCI9054_DEV_FN, 0x4c, &ret);
+		pci_read_config_dword (CONFIG_SYS_PCI9054_DEV_FN, 0x4c, &ret);
 		if ((ret & 0x80000000) == 0) {
 			break;
 		} else {
@@ -109,7 +109,7 @@ static void showPci9054 (void)
 	for (l = 0; l < 6; l++) {
 		printf ("%02x: ", l * 0x10);
 		for (i = 0; i < 4; i++) {
-			pci_read_config_dword (CFG_PCI9054_DEV_FN,
+			pci_read_config_dword (CONFIG_SYS_PCI9054_DEV_FN,
 						l * 16 + i * 4,
 						(unsigned int *)&val);
 			printf ("%08x ", val);
diff --git a/board/esd/dasa_sim/dasa_sim.c b/board/esd/dasa_sim/dasa_sim.c
index fb0c77e56..47d6bb3cc 100644
--- a/board/esd/dasa_sim/dasa_sim.c
+++ b/board/esd/dasa_sim/dasa_sim.c
@@ -22,6 +22,7 @@
  */
 
 #include <common.h>
+#include <netdev.h>
 #include "dasa_sim.h"
 
 /* ------------------------------------------------------------------------- */
@@ -203,22 +204,7 @@ int checkboard (void)
 	return 0;
 }
 
-
-/* ------------------------------------------------------------------------- */
-
 phys_size_t initdram (int board_type)
 {
 	return (16 * 1024 * 1024);
 }
-
-/* ------------------------------------------------------------------------- */
-
-int testdram (void)
-{
-	/* TODO: XXX XXX XXX */
-	printf ("test: 16 MB - ok\n");
-
-	return (0);
-}
-
-/* ------------------------------------------------------------------------- */
diff --git a/board/esd/dasa_sim/flash.c b/board/esd/dasa_sim/flash.c
index d2ac13fcd..9c71b043c 100644
--- a/board/esd/dasa_sim/flash.c
+++ b/board/esd/dasa_sim/flash.c
@@ -47,7 +47,7 @@ unsigned long flash_init (void)
 	unsigned long base_b0;
 
 	/* Init: no FLASHes known */
-	for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) {
+	for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
 		flash_info[i].flash_id = FLASH_UNKNOWN;
 	}
 
diff --git a/board/esd/dasa_sim/u-boot.lds b/board/esd/dasa_sim/u-boot.lds
index 67d72f77f..6acf7b846 100644
--- a/board/esd/dasa_sim/u-boot.lds
+++ b/board/esd/dasa_sim/u-boot.lds
@@ -78,7 +78,6 @@ SECTIONS
     common/cmd_mem.o		(.text)
     common/cmd_nvedit.o		(.text)
     common/console.o		(.text)
-    common/lists.o		(.text)
     common/main.o		(.text)
 
     board/esd/dasa_sim/flash.o	(.text)
@@ -87,7 +86,7 @@ SECTIONS
     net/bootp.o	(.text)
 
     . = env_offset;
-    common/environment.o(.text)
+    common/env_embedded.o(.text)
 
     *(.text)
     *(.fixup)
@@ -158,6 +157,7 @@ SECTIONS
    *(.dynbss)
    *(.bss)
    *(COMMON)
+   . = ALIGN(4);
   }
   _end = . ;
   PROVIDE (end = .);
diff --git a/board/esd/dp405/dp405.c b/board/esd/dp405/dp405.c
index bb3baa477..eb001dacb 100644
--- a/board/esd/dp405/dp405.c
+++ b/board/esd/dp405/dp405.c
@@ -74,15 +74,6 @@ int board_early_init_f (void)
 	return 0;
 }
 
-
-/* ------------------------------------------------------------------------- */
-
-int misc_init_f (void)
-{
-	return 0;  /* dummy implementation */
-}
-
-
 int misc_init_r (void)
 {
 	/* adjust flash start and offset */
@@ -119,30 +110,3 @@ int checkboard (void)
 
 	return 0;
 }
-
-/* ------------------------------------------------------------------------- */
-
-phys_size_t initdram (int board_type)
-{
-	unsigned long val;
-
-	mtdcr(memcfga, mem_mb0cf);
-	val = mfdcr(memcfgd);
-
-#if 0
-	printf("\nmb0cf=%x\n", val); /* test-only */
-	printf("strap=%x\n", mfdcr(strap)); /* test-only */
-#endif
-
-	return (4*1024*1024 << ((val & 0x000e0000) >> 17));
-}
-
-/* ------------------------------------------------------------------------- */
-
-int testdram (void)
-{
-	/* TODO: XXX XXX XXX */
-	printf ("test: 16 MB - ok\n");
-
-	return (0);
-}
diff --git a/board/esd/dp405/flash.c b/board/esd/dp405/flash.c
index 89af1190a..274ada9fe 100644
--- a/board/esd/dp405/flash.c
+++ b/board/esd/dp405/flash.c
@@ -48,7 +48,7 @@ unsigned long flash_init (void)
 	int size_val = 0;
 
 	/* Init: no FLASHes known */
-	for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) {
+	for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
 		flash_info[i].flash_id = FLASH_UNKNOWN;
 	}
 
@@ -91,7 +91,7 @@ unsigned long flash_init (void)
 
 	/* Monitor protection ON by default */
 	(void)flash_protect(FLAG_PROTECT_SET,
-			    -CFG_MONITOR_LEN,
+			    -CONFIG_SYS_MONITOR_LEN,
 			    0xffffffff,
 			    &flash_info[0]);
 
diff --git a/board/esd/dp405/u-boot.lds b/board/esd/dp405/u-boot.lds
index d70d37934..d8fbea396 100644
--- a/board/esd/dp405/u-boot.lds
+++ b/board/esd/dp405/u-boot.lds
@@ -66,14 +66,14 @@ SECTIONS
     cpu/ppc4xx/4xx_uart.o	(.text)
     cpu/ppc4xx/cpu_init.o	(.text)
     cpu/ppc4xx/speed.o	(.text)
-    cpu/ppc4xx/4xx_enet.o	(.text)
+    drivers/net/4xx_enet.o	(.text)
     common/dlmalloc.o	(.text)
     lib_generic/crc32.o		(.text)
     lib_ppc/extable.o	(.text)
     lib_generic/zlib.o		(.text)
 
 /*    . = env_offset;*/
-/*    common/environment.o(.text)*/
+/*    common/env_embedded.o(.text)*/
 
     *(.text)
     *(.fixup)
@@ -144,6 +144,7 @@ SECTIONS
    *(.dynbss)
    *(.bss)
    *(COMMON)
+   . = ALIGN(4);
   }
   _end = . ;
   PROVIDE (end = .);
diff --git a/board/esd/du405/du405.c b/board/esd/du405/du405.c
index 78ae4ba67..8a87d5549 100644
--- a/board/esd/du405/du405.c
+++ b/board/esd/du405/du405.c
@@ -198,18 +198,3 @@ int checkboard (void)
 
 	return 0;
 }
-
-
-phys_size_t initdram (int board_type)
-{
-	return (16 * 1024 * 1024);
-}
-
-
-int testdram (void)
-{
-	/* TODO: XXX XXX XXX */
-	printf ("test: 16 MB - ok\n");
-
-	return (0);
-}
diff --git a/board/esd/du405/flash.c b/board/esd/du405/flash.c
index 14549c014..240aa09f5 100644
--- a/board/esd/du405/flash.c
+++ b/board/esd/du405/flash.c
@@ -47,7 +47,7 @@ unsigned long flash_init (void)
 	unsigned long base_b0, base_b1;
 
 	/* Init: no FLASHes known */
-	for (i = 0; i < CFG_MAX_FLASH_BANKS; ++i) {
+	for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
 		flash_info[i].flash_id = FLASH_UNKNOWN;
 	}
 
diff --git a/board/esd/du405/u-boot.lds b/board/esd/du405/u-boot.lds
index 46ef7e72a..858ae61ec 100644
--- a/board/esd/du405/u-boot.lds
+++ b/board/esd/du405/u-boot.lds
@@ -72,7 +72,7 @@ SECTIONS
     lib_generic/zlib.o		(.text)
 
 /*    . = env_offset;*/
-/*    common/environment.o(.text)*/
+/*    common/env_embedded.o(.text)*/
 
     *(.text)
     *(.fixup)
@@ -143,6 +143,7 @@ SECTIONS
    *(.dynbss)
    *(.bss)
    *(COMMON)
+   . = ALIGN(4);
   }
   _end = . ;
   PROVIDE (end = .);
diff --git a/board/esd/du440/config.mk b/board/esd/du440/config.mk
index 516433450..91e65ec8a 100644
--- a/board/esd/du440/config.mk
+++ b/board/esd/du440/config.mk
@@ -33,5 +33,5 @@ PLATFORM_CPPFLAGS += -DDEBUG
 endif
 
 ifeq ($(dbcr),1)
-PLATFORM_CPPFLAGS += -DCFG_INIT_DBCR=0x8cff0000
+PLATFORM_CPPFLAGS += -DCONFIG_SYS_INIT_DBCR=0x8cff0000
 endif
diff --git a/board/esd/du440/du440.c b/board/esd/du440/du440.c
index 8765cc1f3..2f97a1262 100644
--- a/board/esd/du440/du440.c
+++ b/board/esd/du440/du440.c
@@ -29,7 +29,7 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
-extern flash_info_t flash_info[CFG_MAX_FLASH_BANKS];
+extern flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];
 extern ulong flash_get_size (ulong base, int banknum);
 
 int usbhub_init(void);
@@ -51,31 +51,31 @@ int board_early_init_f(void)
 	/*
 	 * Setup the GPIO pins
 	 */
-	out_be32((void*)GPIO0_OR, 0x00000000 | CFG_GPIO0_EP_EEP);
-	out_be32((void*)GPIO0_TCR, 0x0000000f | CFG_GPIO0_EP_EEP);
+	out_be32((void*)GPIO0_OR, 0x00000000 | CONFIG_SYS_GPIO0_EP_EEP);
+	out_be32((void*)GPIO0_TCR, 0x0000001f | CONFIG_SYS_GPIO0_EP_EEP);
 	out_be32((void*)GPIO0_OSRL, 0x50055400);
-	out_be32((void*)GPIO0_OSRH, 0x550050aa);
+	out_be32((void*)GPIO0_OSRH, 0x55005000);
 	out_be32((void*)GPIO0_TSRL, 0x50055400);
 	out_be32((void*)GPIO0_TSRH, 0x55005000);
 	out_be32((void*)GPIO0_ISR1L, 0x50000000);
 	out_be32((void*)GPIO0_ISR1H, 0x00000000);
 	out_be32((void*)GPIO0_ISR2L, 0x00000000);
-	out_be32((void*)GPIO0_ISR2H, 0x00000100);
+	out_be32((void*)GPIO0_ISR2H, 0x00000000);
 	out_be32((void*)GPIO0_ISR3L, 0x00000000);
 	out_be32((void*)GPIO0_ISR3H, 0x00000000);
 
 	out_be32((void*)GPIO1_OR, 0x00000000);
 	out_be32((void*)GPIO1_TCR, 0xc2000000 |
-		 CFG_GPIO1_IORSTN |
-		 CFG_GPIO1_IORST2N |
-		 CFG_GPIO1_LEDUSR1 |
-		 CFG_GPIO1_LEDUSR2 |
-		 CFG_GPIO1_LEDPOST |
-		 CFG_GPIO1_LEDDU);
-	out_be32((void*)GPIO1_ODR, CFG_GPIO1_LEDDU);
-	out_be32((void*)GPIO1_OSRL, 0x5c280000);
+		 CONFIG_SYS_GPIO1_IORSTN |
+		 CONFIG_SYS_GPIO1_IORST2N |
+		 CONFIG_SYS_GPIO1_LEDUSR1 |
+		 CONFIG_SYS_GPIO1_LEDUSR2 |
+		 CONFIG_SYS_GPIO1_LEDPOST |
+		 CONFIG_SYS_GPIO1_LEDDU);
+	out_be32((void*)GPIO1_ODR, CONFIG_SYS_GPIO1_LEDDU);
+	out_be32((void*)GPIO1_OSRL, 0x0c280000);
 	out_be32((void*)GPIO1_OSRH, 0x00000000);
-	out_be32((void*)GPIO1_TSRL, 0x0c000000);
+	out_be32((void*)GPIO1_TSRL, 0xcc000000);
 	out_be32((void*)GPIO1_TSRH, 0x00000000);
 	out_be32((void*)GPIO1_ISR1L, 0x00005550);
 	out_be32((void*)GPIO1_ISR1H, 0x00000000);
@@ -154,8 +154,8 @@ int board_early_init_f(void)
 		SDR0_CUST0_NDFC_ENABLE		|
 		SDR0_CUST0_NDFC_BW_8_BIT	|
 		SDR0_CUST0_NDFC_ARE_MASK	|
-		(0x80000000 >> (28 + CFG_NAND0_CS)) |
-		(0x80000000 >> (28 + CFG_NAND1_CS));
+		(0x80000000 >> (28 + CONFIG_SYS_NAND0_CS)) |
+		(0x80000000 >> (28 + CONFIG_SYS_NAND1_CS));
 	mtsdr(SDR0_CUST0, sdr0_cust0);
 
 	return 0;
@@ -169,6 +169,7 @@ int misc_init_r(void)
 	unsigned long usb2d0cr = 0;
 	unsigned long usb2phy0cr, usb2h0cr = 0;
 	unsigned long sdr0_pfc1;
+	unsigned long sdr0_srst0, sdr0_srst1;
 	int i, j;
 
 	/* adjust flash start and offset */
@@ -223,10 +224,38 @@ int misc_init_r(void)
 	mtsdr(SDR0_USB2PHY0CR, usb2phy0cr);
 	mtsdr(SDR0_USB2H0CR, usb2h0cr);
 
-	/* clear resets */
-	udelay (1000);
+	/*
+	 * Take USB out of reset:
+	 * -Initial status = all cores are in reset
+	 * -deassert reset to OPB1, P4OPB0, OPB2, PLB42OPB1 OPB2PLB40 cores
+	 * -wait 1 ms
+	 * -deassert reset to PHY
+	 * -wait 1 ms
+	 * -deassert  reset to HOST
+	 * -wait 4 ms
+	 * -deassert all other resets
+	 */
+	mfsdr(SDR0_SRST1, sdr0_srst1);
+	sdr0_srst1 &= ~(SDR0_SRST1_OPBA1 |		\
+			SDR0_SRST1_P4OPB0 |		\
+			SDR0_SRST1_OPBA2 |		\
+			SDR0_SRST1_PLB42OPB1 |		\
+			SDR0_SRST1_OPB2PLB40);
+	mtsdr(SDR0_SRST1, sdr0_srst1);
+	udelay(1000);
+
+	mfsdr(SDR0_SRST1, sdr0_srst1);
+	sdr0_srst1 &= ~SDR0_SRST1_USB20PHY;
+	mtsdr(SDR0_SRST1, sdr0_srst1);
+	udelay(1000);
+
+	mfsdr(SDR0_SRST0, sdr0_srst0);
+	sdr0_srst0 &= ~SDR0_SRST0_USB2H;
+	mtsdr(SDR0_SRST0, sdr0_srst0);
+	udelay(4000);
+
+	/* finally all the other resets */
 	mtsdr(SDR0_SRST1, 0x00000000);
-	udelay (1000);
 	mtsdr(SDR0_SRST0, 0x00000000);
 
 	printf("USB:   Host(int phy)\n");
@@ -244,7 +273,7 @@ int misc_init_r(void)
 	 * We have to wait at least 560ms until we may call usbhub_init
 	 */
 	out_be32((void*)GPIO1_OR, in_be32((void*)GPIO1_OR) |
-		 CFG_GPIO1_IORSTN | CFG_GPIO1_IORST2N);
+		 CONFIG_SYS_GPIO1_IORSTN | CONFIG_SYS_GPIO1_IORST2N);
 
 	/*
 	 * flash USR1/2 LEDs (600ms)
@@ -253,22 +282,22 @@ int misc_init_r(void)
 	 */
 	for (j = 0; j < 3; j++) {
 		out_be32((void*)GPIO1_OR,
-			 (in_be32((void*)GPIO1_OR) & ~CFG_GPIO1_LEDUSR2) |
-			 CFG_GPIO1_LEDUSR1);
+			 (in_be32((void*)GPIO1_OR) & ~CONFIG_SYS_GPIO1_LEDUSR2) |
+			 CONFIG_SYS_GPIO1_LEDUSR1);
 
 		for (i = 0; i < 100; i++)
 			udelay(1000);
 
 		out_be32((void*)GPIO1_OR,
-			 (in_be32((void*)GPIO1_OR) & ~CFG_GPIO1_LEDUSR1) |
-			 CFG_GPIO1_LEDUSR2);
+			 (in_be32((void*)GPIO1_OR) & ~CONFIG_SYS_GPIO1_LEDUSR1) |
+			 CONFIG_SYS_GPIO1_LEDUSR2);
 
 		for (i = 0; i < 100; i++)
 			udelay(1000);
 	}
 
 	out_be32((void*)GPIO1_OR, in_be32((void*)GPIO1_OR) &
-		 ~(CFG_GPIO1_LEDUSR1 | CFG_GPIO1_LEDUSR2));
+		 ~(CONFIG_SYS_GPIO1_LEDUSR1 | CONFIG_SYS_GPIO1_LEDUSR2));
 
 	if (usbhub_init())
 		du440_post_errors++;
@@ -281,14 +310,14 @@ int misc_init_r(void)
 
 int pld_revision(void)
 {
-	out8(CFG_CPLD_BASE, 0x00);
-	return (int)(in8(CFG_CPLD_BASE) & CPLD_VERSION_MASK);
+	out8(CONFIG_SYS_CPLD_BASE, 0x00);
+	return (int)(in8(CONFIG_SYS_CPLD_BASE) & CPLD_VERSION_MASK);
 }
 
 int board_revision(void)
 {
-	int rpins = (int)((in_be32((void*)GPIO1_IR) & CFG_GPIO1_HWVER_MASK)
-			  >> CFG_GPIO1_HWVER_SHIFT);
+	int rpins = (int)((in_be32((void*)GPIO1_IR) & CONFIG_SYS_GPIO1_HWVER_MASK)
+			  >> CONFIG_SYS_GPIO1_HWVER_SHIFT);
 
 	return ((rpins & 1) << 3) | ((rpins & 2) << 1) |
 		((rpins & 4) >> 1) | ((rpins & 8) >> 3);
@@ -299,7 +328,7 @@ void board_show_activity (ulong timestamp)
 {
 	if ((timestamp % 100) == 0)
 		out_be32((void*)GPIO1_OR,
-			 in_be32((void*)GPIO1_OR) ^ CFG_GPIO1_LEDUSR1);
+			 in_be32((void*)GPIO1_OR) ^ CONFIG_SYS_GPIO1_LEDUSR1);
 }
 
 void show_activity(int arg)
@@ -392,7 +421,7 @@ int pci_pre_init(struct pci_controller *hose)
  * inbound map (PIM). But the bootstrap config choices are limited and
  * may not be sufficient for a given board.
  */
-#if defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT)
+#if defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT)
 void pci_target_init(struct pci_controller *hose)
 {
 	/*
@@ -408,16 +437,16 @@ void pci_target_init(struct pci_controller *hose)
 	 */
 	out32r(PCIX0_PMM0MA, 0x00000000);	/* PMM0 Mask/Attribute */
 						/* - disabled b4 setting */
-	out32r(PCIX0_PMM0LA, CFG_PCI_MEMBASE);	/* PMM0 Local Address */
-	out32r(PCIX0_PMM0PCILA, CFG_PCI_MEMBASE); /* PMM0 PCI Low Address */
+	out32r(PCIX0_PMM0LA, CONFIG_SYS_PCI_MEMBASE);	/* PMM0 Local Address */
+	out32r(PCIX0_PMM0PCILA, CONFIG_SYS_PCI_MEMBASE); /* PMM0 PCI Low Address */
 	out32r(PCIX0_PMM0PCIHA, 0x00000000);	/* PMM0 PCI High Address */
 	out32r(PCIX0_PMM0MA, 0xE0000001);	/* 512M + No prefetching, */
 						/* and enable region */
 
 	out32r(PCIX0_PMM1MA, 0x00000000);	/* PMM0 Mask/Attribute */
 						/* - disabled b4 setting */
-	out32r(PCIX0_PMM1LA, CFG_PCI_MEMBASE2); /* PMM0 Local Address */
-	out32r(PCIX0_PMM1PCILA, CFG_PCI_MEMBASE2); /* PMM0 PCI Low Address */
+	out32r(PCIX0_PMM1LA, CONFIG_SYS_PCI_MEMBASE2); /* PMM0 Local Address */
+	out32r(PCIX0_PMM1PCILA, CONFIG_SYS_PCI_MEMBASE2); /* PMM0 PCI Low Address */
 	out32r(PCIX0_PMM1PCIHA, 0x00000000);	/* PMM0 PCI High Address */
 	out32r(PCIX0_PMM1MA, 0xE0000001);	/* 512M + No prefetching, */
 						/* and enable region */
@@ -450,9 +479,9 @@ void pci_target_init(struct pci_controller *hose)
 	pci_write_config_dword(0, PCI_BRDGOPT2, 0x00000101);
 
 }
-#endif /* defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT) */
+#endif /* defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT) */
 
-#if defined(CONFIG_PCI) && defined(CFG_PCI_MASTER_INIT)
+#if defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_MASTER_INIT)
 void pci_master_init(struct pci_controller *hose)
 {
 	unsigned short temp_short;
@@ -467,7 +496,7 @@ void pci_master_init(struct pci_controller *hose)
 			      temp_short | PCI_COMMAND_MASTER |
 			      PCI_COMMAND_MEMORY);
 }
-#endif /* defined(CONFIG_PCI) && defined(CFG_PCI_MASTER_INIT) */
+#endif /* defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_MASTER_INIT) */
 
 /*
  * is_pci_host
@@ -495,18 +524,18 @@ int last_stage_init(void)
 	int e, i;
 
 	/* everyting is ok: turn on POST-LED */
-	out_be32((void*)GPIO1_OR, in_be32((void*)GPIO1_OR) | CFG_GPIO1_LEDPOST);
+	out_be32((void*)GPIO1_OR, in_be32((void*)GPIO1_OR) | CONFIG_SYS_GPIO1_LEDPOST);
 
 	/* slowly blink on errors and finally keep LED off */
 	for (e = 0; e < du440_post_errors; e++) {
 		out_be32((void*)GPIO1_OR,
-			 in_be32((void*)GPIO1_OR) | CFG_GPIO1_LEDPOST);
+			 in_be32((void*)GPIO1_OR) | CONFIG_SYS_GPIO1_LEDPOST);
 
 		for (i = 0; i < 500; i++)
 			udelay(1000);
 
 		out_be32((void*)GPIO1_OR,
-			 in_be32((void*)GPIO1_OR) & ~CFG_GPIO1_LEDPOST);
+			 in_be32((void*)GPIO1_OR) & ~CONFIG_SYS_GPIO1_LEDPOST);
 
 		for (i = 0; i < 500; i++)
 			udelay(1000);
@@ -554,9 +583,9 @@ int do_dcf77(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 		printf("ERROR - no signal\n");
 
 	t1 = t2 = 0;
-	pinold = in_be32((void*)GPIO1_IR) & CFG_GPIO1_DCF77;
+	pinold = in_be32((void*)GPIO1_IR) & CONFIG_SYS_GPIO1_DCF77;
 	while (!ctrlc()) {
-		pin = in_be32((void*)GPIO1_IR) & CFG_GPIO1_DCF77;
+		pin = in_be32((void*)GPIO1_IR) & CONFIG_SYS_GPIO1_DCF77;
 		if (pin && !pinold) { /* bit start */
 			t1 = get_ticks();
 			if (t2 && ((unsigned int)(t1 - t2) /
@@ -632,7 +661,7 @@ U_BOOT_CMD(
 	);
 #endif /* CONFIG_I2C_MULTI_BUS */
 
-#define CFG_BOOT_EEPROM_PAGE_WRITE_BITS 3
+#define CONFIG_SYS_BOOT_EEPROM_PAGE_WRITE_BITS 3
 int boot_eeprom_write (unsigned dev_addr,
 		       unsigned offset,
 		       uchar *buffer,
@@ -642,7 +671,7 @@ int boot_eeprom_write (unsigned dev_addr,
 	unsigned blk_off;
 	int rcode = 0;
 
-#if defined(CFG_EEPROM_WREN)
+#if defined(CONFIG_SYS_EEPROM_WREN)
 	eeprom_write_enable(dev_addr, 1);
 #endif
 	/*
@@ -671,9 +700,9 @@ int boot_eeprom_write (unsigned dev_addr,
 		 * bytes that can be ccessed with the single read or write
 		 * operation.
 		 */
-#if defined(CFG_BOOT_EEPROM_PAGE_WRITE_BITS)
+#if defined(CONFIG_SYS_BOOT_EEPROM_PAGE_WRITE_BITS)
 
-#define	BOOT_EEPROM_PAGE_SIZE (1 << CFG_BOOT_EEPROM_PAGE_WRITE_BITS)
+#define	BOOT_EEPROM_PAGE_SIZE (1 << CONFIG_SYS_BOOT_EEPROM_PAGE_WRITE_BITS)
 #define BOOT_EEPROM_PAGE_OFFSET(x) ((x) & (BOOT_EEPROM_PAGE_SIZE - 1))
 
 		maxlen = BOOT_EEPROM_PAGE_SIZE -
@@ -693,11 +722,11 @@ int boot_eeprom_write (unsigned dev_addr,
 		buffer += len;
 		offset += len;
 
-#if defined(CFG_EEPROM_PAGE_WRITE_DELAY_MS)
-		udelay(CFG_EEPROM_PAGE_WRITE_DELAY_MS * 1000);
+#if defined(CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS)
+		udelay(CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS * 1000);
 #endif
 	}
-#if defined(CFG_EEPROM_WREN)
+#if defined(CONFIG_SYS_EEPROM_WREN)
 	eeprom_write_enable(dev_addr, 0);
 #endif
 	return rcode;
@@ -733,6 +762,12 @@ int do_setup_boot_eeprom(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 			/* sdsdp[1]=0x095fa030; */
 			sdsdp[2] = 0x40082350;
 			sdsdp[3] = 0x0d050000;
+		} else if (!strcmp(argv[1], "667-166")) {
+			printf("Bootstrapping for 667-166MHz\n");
+			sdsdp[0] = 0x8778a252;
+			sdsdp[1] = 0x09d7a030;
+			sdsdp[2] = 0x40082350;
+			sdsdp[3] = 0x0d050000;
 		}
 	} else {
 		printf("Bootstrapping for 533MHz (default)\n");
@@ -744,7 +779,7 @@ int do_setup_boot_eeprom(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 	}
 
 	printf("Writing boot EEPROM ...\n");
-	if (boot_eeprom_write(CFG_I2C_BOOT_EEPROM_ADDR,
+	if (boot_eeprom_write(CONFIG_SYS_I2C_BOOT_EEPROM_ADDR,
 			      0, (uchar*)sdsdp, 16) != 0)
 		printf("boot_eeprom_write failed\n");
 	else
@@ -758,7 +793,7 @@ U_BOOT_CMD(
 	NULL
 	);
 
-#if defined(CFG_EEPROM_WREN)
+#if defined(CONFIG_SYS_EEPROM_WREN)
 /*
  * Input: <dev_addr>  I2C address of EEPROM device to enable.
  *         <state>     -1: deliver current state
@@ -770,27 +805,27 @@ U_BOOT_CMD(
  */
 int eeprom_write_enable (unsigned dev_addr, int state)
 {
-	if ((CFG_I2C_EEPROM_ADDR != dev_addr) &&
-	    (CFG_I2C_BOOT_EEPROM_ADDR != dev_addr))
+	if ((CONFIG_SYS_I2C_EEPROM_ADDR != dev_addr) &&
+	    (CONFIG_SYS_I2C_BOOT_EEPROM_ADDR != dev_addr))
 		return -1;
 	else {
 		switch (state) {
 		case 1:
 			/* Enable write access, clear bit GPIO_SINT2. */
 			out_be32((void*)GPIO0_OR,
-				 in_be32((void*)GPIO0_OR) & ~CFG_GPIO0_EP_EEP);
+				 in_be32((void*)GPIO0_OR) & ~CONFIG_SYS_GPIO0_EP_EEP);
 			state = 0;
 			break;
 		case 0:
 			/* Disable write access, set bit GPIO_SINT2. */
 			out_be32((void*)GPIO0_OR,
-				 in_be32((void*)GPIO0_OR) | CFG_GPIO0_EP_EEP);
+				 in_be32((void*)GPIO0_OR) | CONFIG_SYS_GPIO0_EP_EEP);
 			state = 0;
 			break;
 		default:
 			/* Read current status back. */
 			state = (0 == (in_be32((void*)GPIO0_OR) &
-				       CFG_GPIO0_EP_EEP));
+				       CONFIG_SYS_GPIO0_EP_EEP));
 			break;
 		}
 	}
@@ -804,21 +839,21 @@ int do_eep_wren (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 
 	if (query) {
 		/* Query write access state. */
-		state = eeprom_write_enable(CFG_I2C_EEPROM_ADDR, -1);
+		state = eeprom_write_enable(CONFIG_SYS_I2C_EEPROM_ADDR, -1);
 		if (state < 0)
 			puts ("Query of write access state failed.\n");
 		else {
 			printf ("Write access for device 0x%0x is %sabled.\n",
-				CFG_I2C_EEPROM_ADDR, state ? "en" : "dis");
+				CONFIG_SYS_I2C_EEPROM_ADDR, state ? "en" : "dis");
 			state = 0;
 		}
 	} else {
 		if ('0' == argv[1][0]) {
 			/* Disable write access. */
-			state = eeprom_write_enable(CFG_I2C_EEPROM_ADDR, 0);
+			state = eeprom_write_enable(CONFIG_SYS_I2C_EEPROM_ADDR, 0);
 		} else {
 			/* Enable write access. */
-			state = eeprom_write_enable(CFG_I2C_EEPROM_ADDR, 1);
+			state = eeprom_write_enable(CONFIG_SYS_I2C_EEPROM_ADDR, 1);
 		}
 		if (state < 0)
 			puts ("Setup of write access state failed.\n");
@@ -830,19 +865,19 @@ int do_eep_wren (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 U_BOOT_CMD(eepwren, 2, 0, do_eep_wren,
 	   "eepwren - Enable / disable / query EEPROM write access\n",
 	   NULL);
-#endif /* #if defined(CFG_EEPROM_WREN) */
+#endif /* #if defined(CONFIG_SYS_EEPROM_WREN) */
 
 static int got_pldirq;
 
 static int pld_interrupt(u32 arg)
 {
 	int rc = -1; /* not for us */
-	u8 status = in8(CFG_CPLD_BASE);
+	u8 status = in8(CONFIG_SYS_CPLD_BASE);
 
 	/* check for PLD interrupt */
 	if (status & PWR_INT_FLAG) {
 		/* reset this int */
-		out8(CFG_CPLD_BASE, 0);
+		out8(CONFIG_SYS_CPLD_BASE, 0);
 		rc = 0;
 		got_pldirq = 1; /* trigger backend */
 	}
@@ -855,7 +890,7 @@ int do_waitpwrirq(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 	got_pldirq = 0;
 
 	/* clear any pending interrupt */
-	out8(CFG_CPLD_BASE, 0);
+	out8(CONFIG_SYS_CPLD_BASE, 0);
 
 	irq_install_handler(CPLD_IRQ,
 			    (interrupt_handler_t *)pld_interrupt, 0);
@@ -871,7 +906,7 @@ int do_waitpwrirq(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 	if (got_pldirq) {
 		printf("Got interrupt!\n");
 		printf("Power %sready!\n",
-		       in8(CFG_CPLD_BASE) & PWR_RDY ? "":"NOT ");
+		       in8(CONFIG_SYS_CPLD_BASE) & PWR_RDY ? "":"NOT ");
 	}
 
 	irq_free_handler(CPLD_IRQ);
@@ -935,7 +970,7 @@ U_BOOT_CMD(
 int do_time(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 {
 	unsigned long long start, end;
-	char c, cmd[CFG_CBSIZE];
+	char c, cmd[CONFIG_SYS_CBSIZE];
 	char *p, *d = cmd;
 	int ret, i;
 	ulong us;
@@ -963,7 +998,7 @@ int do_time(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 	return ret;
 }
 U_BOOT_CMD(
-	time,	CFG_MAXARGS,	1,	do_time,
+	time,	CONFIG_SYS_MAXARGS,	1,	do_time,
 	"time    - run command and output execution time\n",
 	NULL
 	);
@@ -1013,7 +1048,7 @@ int do_gfxdemo(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 	return 0;
 }
 U_BOOT_CMD(
-	gfxdemo,	CFG_MAXARGS,	1,	do_gfxdemo,
+	gfxdemo,	CONFIG_SYS_MAXARGS,	1,	do_gfxdemo,
 	"gfxdemo - demo\n",
 	NULL
 	);
diff --git a/board/esd/du440/du440.h b/board/esd/du440/du440.h
index 83fdac7c6..a124a7ee9 100644
--- a/board/esd/du440/du440.h
+++ b/board/esd/du440/du440.h
@@ -20,18 +20,18 @@
 
 #define SDR0_USB0		0x0320     /* USB Control Register */
 
-#define CFG_GPIO0_EP_EEP	(0x80000000 >> 23)       /* GPIO0_23 */
-#define CFG_GPIO1_DCF77		(0x80000000 >> (42-32))  /* GPIO1_42 */
+#define CONFIG_SYS_GPIO0_EP_EEP	(0x80000000 >> 23)       /* GPIO0_23 */
+#define CONFIG_SYS_GPIO1_DCF77		(0x80000000 >> (42-32))  /* GPIO1_42 */
 
-#define CFG_GPIO1_IORSTN	(0x80000000 >> (55-32))  /* GPIO1_55 */
-#define CFG_GPIO1_IORST2N	(0x80000000 >> (47-32))  /* GPIO1_47 */
+#define CONFIG_SYS_GPIO1_IORSTN	(0x80000000 >> (55-32))  /* GPIO1_55 */
+#define CONFIG_SYS_GPIO1_IORST2N	(0x80000000 >> (47-32))  /* GPIO1_47 */
 
-#define CFG_GPIO1_HWVER_MASK	0x000000f0 /* GPIO1_56-59 */
-#define CFG_GPIO1_HWVER_SHIFT	4
-#define CFG_GPIO1_LEDUSR1	0x00000008 /* GPIO1_60 */
-#define CFG_GPIO1_LEDUSR2	0x00000004 /* GPIO1_61 */
-#define CFG_GPIO1_LEDPOST	0x00000002 /* GPIO1_62 */
-#define CFG_GPIO1_LEDDU		0x00000001 /* GPIO1_63 */
+#define CONFIG_SYS_GPIO1_HWVER_MASK	0x000000f0 /* GPIO1_56-59 */
+#define CONFIG_SYS_GPIO1_HWVER_SHIFT	4
+#define CONFIG_SYS_GPIO1_LEDUSR1	0x00000008 /* GPIO1_60 */
+#define CONFIG_SYS_GPIO1_LEDUSR2	0x00000004 /* GPIO1_61 */
+#define CONFIG_SYS_GPIO1_LEDPOST	0x00000002 /* GPIO1_62 */
+#define CONFIG_SYS_GPIO1_LEDDU		0x00000001 /* GPIO1_63 */
 
 #define CPLD_VERSION_MASK	0x0f
 #define PWR_INT_FLAG		0x80
diff --git a/board/esd/du440/init.S b/board/esd/du440/init.S
index 4390b5074..3cac6b11b 100644
--- a/board/esd/du440/init.S
+++ b/board/esd/du440/init.S
@@ -44,30 +44,30 @@ tlbtab:
 	 * BOOT_CS (FLASH) must be first. Before relocation SA_I can be off to use the
 	 * speed up boot process. It is patched after relocation to enable SA_I
 	 */
-	tlbentry( CFG_BOOT_BASE_ADDR, SZ_256M, CFG_BOOT_BASE_ADDR, 1, AC_R|AC_W|AC_X|SA_G )
+	tlbentry( CONFIG_SYS_BOOT_BASE_ADDR, SZ_256M, CONFIG_SYS_BOOT_BASE_ADDR, 1, AC_R|AC_W|AC_X|SA_G )
 
-#ifdef CFG_INIT_RAM_DCACHE
+#ifdef CONFIG_SYS_INIT_RAM_DCACHE
 	/* TLB-entry for init-ram in dcache (SA_I must be turned off!) */
-	tlbentry( CFG_INIT_RAM_ADDR, SZ_64K, CFG_INIT_RAM_ADDR, 0, AC_R|AC_W|AC_X|SA_G )
+	tlbentry( CONFIG_SYS_INIT_RAM_ADDR, SZ_64K, CONFIG_SYS_INIT_RAM_ADDR, 0, AC_R|AC_W|AC_X|SA_G )
 #endif
 
 	/* TLB-entry for PCI Memory */
-	tlbentry( CFG_PCI_MEMBASE, SZ_256M,  CFG_PCI_MEMBASE, 1, AC_R|AC_W|SA_G|SA_I )
-	tlbentry( CFG_PCI_MEMBASE1, SZ_256M, CFG_PCI_MEMBASE1, 1, AC_R|AC_W|SA_G|SA_I )
-	tlbentry( CFG_PCI_MEMBASE2, SZ_256M, CFG_PCI_MEMBASE2, 1, AC_R|AC_W|SA_G|SA_I )
-	tlbentry( CFG_PCI_MEMBASE3, SZ_256M, CFG_PCI_MEMBASE3, 1, AC_R|AC_W|SA_G|SA_I )
+	tlbentry( CONFIG_SYS_PCI_MEMBASE, SZ_256M,  CONFIG_SYS_PCI_MEMBASE, 1, AC_R|AC_W|SA_G|SA_I )
+	tlbentry( CONFIG_SYS_PCI_MEMBASE1, SZ_256M, CONFIG_SYS_PCI_MEMBASE1, 1, AC_R|AC_W|SA_G|SA_I )
+	tlbentry( CONFIG_SYS_PCI_MEMBASE2, SZ_256M, CONFIG_SYS_PCI_MEMBASE2, 1, AC_R|AC_W|SA_G|SA_I )
+	tlbentry( CONFIG_SYS_PCI_MEMBASE3, SZ_256M, CONFIG_SYS_PCI_MEMBASE3, 1, AC_R|AC_W|SA_G|SA_I )
 
 	/* TLB-entry for PCI IO */
-	tlbentry( CFG_PCI_IOBASE, SZ_64K, CFG_PCI_IOBASE, 1, AC_R|AC_W|SA_G|SA_I )
+	tlbentry( CONFIG_SYS_PCI_IOBASE, SZ_64K, CONFIG_SYS_PCI_IOBASE, 1, AC_R|AC_W|SA_G|SA_I )
 
 	/* TLB-entries for EBC:	 CPLD, DUMEM, DUIO */
-	tlbentry( CFG_CPLD_BASE, SZ_1K, CFG_CPLD_BASE, 1, AC_R|AC_W|AC_X|SA_G|SA_I )
-	tlbentry( CFG_DUMEM_BASE, SZ_1M, CFG_DUMEM_BASE, 1, AC_R|AC_W|AC_X|SA_G|SA_I )
-	tlbentry( CFG_DUIO_BASE, SZ_64K, CFG_DUIO_BASE, 1, AC_R|AC_W|AC_X|SA_G|SA_I )
+	tlbentry( CONFIG_SYS_CPLD_BASE, SZ_1K, CONFIG_SYS_CPLD_BASE, 1, AC_R|AC_W|AC_X|SA_G|SA_I )
+	tlbentry( CONFIG_SYS_DUMEM_BASE, SZ_1M, CONFIG_SYS_DUMEM_BASE, 1, AC_R|AC_W|AC_X|SA_G|SA_I )
+	tlbentry( CONFIG_SYS_DUIO_BASE, SZ_64K, CONFIG_SYS_DUIO_BASE, 1, AC_R|AC_W|AC_X|SA_G|SA_I )
 
 	/* TLB-entry for NAND */
-	tlbentry( CFG_NAND0_ADDR, SZ_1K, CFG_NAND0_ADDR, 1, AC_R|AC_W|AC_X|SA_G|SA_I )
-	tlbentry( CFG_NAND1_ADDR, SZ_1K, CFG_NAND1_ADDR, 1, AC_R|AC_W|AC_X|SA_G|SA_I )
+	tlbentry( CONFIG_SYS_NAND0_ADDR, SZ_1K, CONFIG_SYS_NAND0_ADDR, 1, AC_R|AC_W|AC_X|SA_G|SA_I )
+	tlbentry( CONFIG_SYS_NAND1_ADDR, SZ_1K, CONFIG_SYS_NAND1_ADDR, 1, AC_R|AC_W|AC_X|SA_G|SA_I )
 
 	/* TLB-entry for Internal Registers & OCM */
 	tlbentry( 0xe0000000, SZ_16M, 0xe0000000, 0,  AC_R|AC_W|AC_X|SA_I )
diff --git a/board/esd/du440/u-boot.lds b/board/esd/du440/u-boot.lds
index b20fb1c0a..05152b7f7 100644
--- a/board/esd/du440/u-boot.lds
+++ b/board/esd/du440/u-boot.lds
@@ -135,9 +135,10 @@ SECTIONS
    *(.dynbss)
    *(.bss)
    *(COMMON)
+   . = ALIGN(4);
   }
 
-  ppcenv_assert = ASSERT(. < 0xFFFF8000, ".bss section too big, overlaps .ppcenv section. Please update your confguration: CFG_MONITOR_BASE, CFG_MONITOR_LEN and TEXT_BASE may need to be modified.");
+  ppcenv_assert = ASSERT(. < 0xFFFF8000, ".bss section too big, overlaps .ppcenv section. Please update your confguration: CONFIG_SYS_MONITOR_BASE, CONFIG_SYS_MONITOR_LEN and TEXT_BASE may need to be modified.");
 
   _end = . ;
   PROVIDE (end = .);
diff --git a/board/esd/hh405/flash.c b/board/esd/hh405/flash.c
index 89af1190a..274ada9fe 100644
--- a/board/esd/hh405/flash.c
+++ b/board/esd/hh405/flash.c
@@ -48,7 +48,7 @@ unsigned long flash_init (void)
 	int size_val = 0;
 
 	/* Init: no FLASHes known */
-	for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) {
+	for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
 		flash_info[i].flash_id = FLASH_UNKNOWN;
 	}
 
@@ -91,7 +91,7 @@ unsigned long flash_init (void)
 
 	/* Monitor protection ON by default */
 	(void)flash_protect(FLAG_PROTECT_SET,
-			    -CFG_MONITOR_LEN,
+			    -CONFIG_SYS_MONITOR_LEN,
 			    0xffffffff,
 			    &flash_info[0]);
 
diff --git a/board/esd/hh405/hh405.c b/board/esd/hh405/hh405.c
index 802491a31..efadf1646 100644
--- a/board/esd/hh405/hh405.c
+++ b/board/esd/hh405/hh405.c
@@ -345,7 +345,7 @@ int board_early_init_f (void)
 	mtdcr(uicsr, 0xFFFFFFFF);       /* clear all ints */
 	mtdcr(uicer, 0x00000000);       /* disable all ints */
 	mtdcr(uiccr, 0x00000000);       /* set all to be non-critical*/
-	mtdcr(uicpr, CFG_UIC0_POLARITY);/* set int polarities */
+	mtdcr(uicpr, CONFIG_SYS_UIC0_POLARITY);/* set int polarities */
 	mtdcr(uictr, 0x10000000);       /* set int trigger levels */
 	mtdcr(uicvcr, 0x00000001);      /* set vect base=0,INT0 highest priority*/
 	mtdcr(uicsr, 0xFFFFFFFF);       /* clear all ints */
@@ -363,26 +363,26 @@ int cf_enable(void)
 	int i;
 
 	volatile unsigned short *fpga_ctrl =
-		(unsigned short *)((ulong)CFG_FPGA_BASE_ADDR + CFG_FPGA_CTRL);
+		(unsigned short *)((ulong)CONFIG_SYS_FPGA_BASE_ADDR + CONFIG_SYS_FPGA_CTRL);
 	volatile unsigned short *fpga_status =
-		(unsigned short *)((ulong)CFG_FPGA_BASE_ADDR + CFG_FPGA_CTRL + 2);
+		(unsigned short *)((ulong)CONFIG_SYS_FPGA_BASE_ADDR + CONFIG_SYS_FPGA_CTRL + 2);
 
 	if (gd->board_type >= 2) {
-		if (*fpga_status & CFG_FPGA_STATUS_CF_DETECT) {
-			if (!(*fpga_ctrl & CFG_FPGA_CTRL_CF_BUS_EN)) {
-				*fpga_ctrl &= ~CFG_FPGA_CTRL_CF_PWRN;
+		if (*fpga_status & CONFIG_SYS_FPGA_STATUS_CF_DETECT) {
+			if (!(*fpga_ctrl & CONFIG_SYS_FPGA_CTRL_CF_BUS_EN)) {
+				*fpga_ctrl &= ~CONFIG_SYS_FPGA_CTRL_CF_PWRN;
 
 				for (i=0; i<300; i++)
 					udelay(1000);
 
-				*fpga_ctrl |= CFG_FPGA_CTRL_CF_BUS_EN;
+				*fpga_ctrl |= CONFIG_SYS_FPGA_CTRL_CF_BUS_EN;
 
 				for (i=0; i<20; i++)
 					udelay(1000);
 			}
 		} else {
-			*fpga_ctrl &= ~CFG_FPGA_CTRL_CF_BUS_EN;
-			*fpga_ctrl |= CFG_FPGA_CTRL_CF_PWRN;
+			*fpga_ctrl &= ~CONFIG_SYS_FPGA_CTRL_CF_BUS_EN;
+			*fpga_ctrl |= CONFIG_SYS_FPGA_CTRL_CF_PWRN;
 		}
 	}
 
@@ -392,11 +392,11 @@ int cf_enable(void)
 int misc_init_r (void)
 {
 	volatile unsigned short *fpga_ctrl =
-		(unsigned short *)((ulong)CFG_FPGA_BASE_ADDR + CFG_FPGA_CTRL);
+		(unsigned short *)((ulong)CONFIG_SYS_FPGA_BASE_ADDR + CONFIG_SYS_FPGA_CTRL);
 	volatile unsigned short *lcd_contrast =
-		(unsigned short *)((ulong)CFG_FPGA_BASE_ADDR + CFG_FPGA_CTRL + 4);
+		(unsigned short *)((ulong)CONFIG_SYS_FPGA_BASE_ADDR + CONFIG_SYS_FPGA_CTRL + 4);
 	volatile unsigned short *lcd_backlight =
-		(unsigned short *)((ulong)CFG_FPGA_BASE_ADDR + CFG_FPGA_CTRL + 6);
+		(unsigned short *)((ulong)CONFIG_SYS_FPGA_BASE_ADDR + CONFIG_SYS_FPGA_CTRL + 6);
 	unsigned char *dst;
 	ulong len = sizeof(fpgadata);
 	int status;
@@ -405,8 +405,8 @@ int misc_init_r (void)
 	char *str;
 	unsigned long contrast0 = 0xffffffff;
 
-	dst = malloc(CFG_FPGA_MAX_SIZE);
-	if (gunzip (dst, CFG_FPGA_MAX_SIZE, (uchar *)fpgadata, &len) != 0) {
+	dst = malloc(CONFIG_SYS_FPGA_MAX_SIZE);
+	if (gunzip (dst, CONFIG_SYS_FPGA_MAX_SIZE, (uchar *)fpgadata, &len) != 0) {
 		printf ("GUNZIP ERROR - must RESET board to recover\n");
 		do_reset (NULL, 0, 0, NULL);
 	}
@@ -474,22 +474,22 @@ int misc_init_r (void)
 	/*
 	 * Setup and enable EEPROM write protection
 	 */
-	out32(GPIO0_OR, in32(GPIO0_OR) | CFG_EEPROM_WP);
+	out32(GPIO0_OR, in32(GPIO0_OR) | CONFIG_SYS_EEPROM_WP);
 
 	/*
 	 * Reset touch-screen controller
 	 */
-	out32(GPIO0_OR, in32(GPIO0_OR) & ~CFG_TOUCH_RST);
+	out32(GPIO0_OR, in32(GPIO0_OR) & ~CONFIG_SYS_TOUCH_RST);
 	udelay(1000);
-	out32(GPIO0_OR, in32(GPIO0_OR) | CFG_TOUCH_RST);
+	out32(GPIO0_OR, in32(GPIO0_OR) | CONFIG_SYS_TOUCH_RST);
 
 	/*
 	 * Enable power on PS/2 interface (with reset)
 	 */
-	*fpga_ctrl &= ~(CFG_FPGA_CTRL_PS2_PWR);
+	*fpga_ctrl &= ~(CONFIG_SYS_FPGA_CTRL_PS2_PWR);
 	for (i=0;i<500;i++)
 		udelay(1000);
-	*fpga_ctrl |= (CFG_FPGA_CTRL_PS2_PWR);
+	*fpga_ctrl |= (CONFIG_SYS_FPGA_CTRL_PS2_PWR);
 
 	/*
 	 * Get contrast value from environment variable
@@ -512,11 +512,11 @@ int misc_init_r (void)
 		/*
 		 * Switch backlight on
 		 */
-		*fpga_ctrl |= CFG_FPGA_CTRL_VGA0_BL;
+		*fpga_ctrl |= CONFIG_SYS_FPGA_CTRL_VGA0_BL;
 		*lcd_backlight = 0x0000;
 
 		lcd_setup(1, 0);
-		lcd_init((uchar *)CFG_LCD_BIG_REG, (uchar *)CFG_LCD_BIG_MEM,
+		lcd_init((uchar *)CONFIG_SYS_LCD_BIG_REG, (uchar *)CONFIG_SYS_LCD_BIG_MEM,
 			 regs_13806_1024_768_8bpp,
 			 sizeof(regs_13806_1024_768_8bpp)/sizeof(regs_13806_1024_768_8bpp[0]),
 			 logo_bmp_1024, sizeof(logo_bmp_1024));
@@ -524,11 +524,11 @@ int misc_init_r (void)
 		/*
 		 * Switch backlight on
 		 */
-		*fpga_ctrl &= ~CFG_FPGA_CTRL_VGA0_BL;
+		*fpga_ctrl &= ~CONFIG_SYS_FPGA_CTRL_VGA0_BL;
 		*lcd_backlight = 0x0000;
 
 		lcd_setup(1, 0);
-		lcd_init((uchar *)CFG_LCD_BIG_REG, (uchar *)CFG_LCD_BIG_MEM,
+		lcd_init((uchar *)CONFIG_SYS_LCD_BIG_REG, (uchar *)CONFIG_SYS_LCD_BIG_MEM,
 			 regs_13806_640_480_16bpp,
 			 sizeof(regs_13806_640_480_16bpp)/sizeof(regs_13806_640_480_16bpp[0]),
 			 logo_bmp_640, sizeof(logo_bmp_640));
@@ -545,7 +545,7 @@ int misc_init_r (void)
 		/*
 		 * Switch backlight on
 		 */
-		*fpga_ctrl |= CFG_FPGA_CTRL_VGA0_BL | CFG_FPGA_CTRL_VGA0_BL_MODE;
+		*fpga_ctrl |= CONFIG_SYS_FPGA_CTRL_VGA0_BL | CONFIG_SYS_FPGA_CTRL_VGA0_BL_MODE;
 		/*
 		 * Set lcd clock (small epson)
 		 */
@@ -553,7 +553,7 @@ int misc_init_r (void)
 		udelay(100);               /* wait for 100 us */
 
 		lcd_setup(0, 1);
-		lcd_init((uchar *)CFG_LCD_SMALL_REG, (uchar *)CFG_LCD_SMALL_MEM,
+		lcd_init((uchar *)CONFIG_SYS_LCD_SMALL_REG, (uchar *)CONFIG_SYS_LCD_SMALL_MEM,
 			 regs_13705_320_240_8bpp,
 			 sizeof(regs_13705_320_240_8bpp)/sizeof(regs_13705_320_240_8bpp[0]),
 			 logo_bmp_320_8bpp, sizeof(logo_bmp_320_8bpp));
@@ -570,14 +570,14 @@ int misc_init_r (void)
 		/*
 		 * Switch backlight on
 		 */
-		*fpga_ctrl |= CFG_FPGA_CTRL_VGA0_BL | CFG_FPGA_CTRL_VGA0_BL_MODE;
+		*fpga_ctrl |= CONFIG_SYS_FPGA_CTRL_VGA0_BL | CONFIG_SYS_FPGA_CTRL_VGA0_BL_MODE;
 		/*
 		 * Set lcd clock (small epson), enable 1-wire interface
 		 */
-		*fpga_ctrl |= LCD_CLK_08330 | CFG_FPGA_CTRL_OW_ENABLE;
+		*fpga_ctrl |= LCD_CLK_08330 | CONFIG_SYS_FPGA_CTRL_OW_ENABLE;
 
 		lcd_setup(0, 1);
-		lcd_init((uchar *)CFG_LCD_SMALL_REG, (uchar *)CFG_LCD_SMALL_MEM,
+		lcd_init((uchar *)CONFIG_SYS_LCD_SMALL_REG, (uchar *)CONFIG_SYS_LCD_SMALL_MEM,
 			 regs_13704_320_240_4bpp,
 			 sizeof(regs_13704_320_240_4bpp)/sizeof(regs_13704_320_240_4bpp[0]),
 			 logo_bmp_320, sizeof(logo_bmp_320));
@@ -643,48 +643,31 @@ int checkboard (void)
 	return 0;
 }
 
-
-phys_size_t initdram (int board_type)
-{
-	unsigned long val;
-
-	mtdcr(memcfga, mem_mb0cf);
-	val = mfdcr(memcfgd);
-
-#if 0
-	printf("\nmb0cf=%x\n", val); /* test-only */
-	printf("strap=%x\n", mfdcr(strap)); /* test-only */
-#endif
-
-	return (4*1024*1024 << ((val & 0x000e0000) >> 17));
-}
-
-
 #ifdef CONFIG_IDE_RESET
 void ide_set_reset(int on)
 {
 	volatile unsigned short *fpga_mode =
-		(unsigned short *)((ulong)CFG_FPGA_BASE_ADDR + CFG_FPGA_CTRL);
+		(unsigned short *)((ulong)CONFIG_SYS_FPGA_BASE_ADDR + CONFIG_SYS_FPGA_CTRL);
 	volatile unsigned short *fpga_status =
-		(unsigned short *)((ulong)CFG_FPGA_BASE_ADDR + CFG_FPGA_CTRL + 2);
+		(unsigned short *)((ulong)CONFIG_SYS_FPGA_BASE_ADDR + CONFIG_SYS_FPGA_CTRL + 2);
 
-	if (((gd->board_type >= 2) && (*fpga_status & CFG_FPGA_STATUS_CF_DETECT)) ||
+	if (((gd->board_type >= 2) && (*fpga_status & CONFIG_SYS_FPGA_STATUS_CF_DETECT)) ||
 	    (gd->board_type < 2)) {
 		/*
 		 * Assert or deassert CompactFlash Reset Pin
 		 */
 		if (on) {		/* assert RESET */
 			cf_enable();
-			*fpga_mode &= ~(CFG_FPGA_CTRL_CF_RESET);
+			*fpga_mode &= ~(CONFIG_SYS_FPGA_CTRL_CF_RESET);
 		} else {		/* release RESET */
-			*fpga_mode |= CFG_FPGA_CTRL_CF_RESET;
+			*fpga_mode |= CONFIG_SYS_FPGA_CTRL_CF_RESET;
 		}
 	}
 }
 #endif /* CONFIG_IDE_RESET */
 
 
-#if defined(CFG_EEPROM_WREN)
+#if defined(CONFIG_SYS_EEPROM_WREN)
 /* Input: <dev_addr>  I2C address of EEPROM device to enable.
  *         <state>     -1: deliver current state
  *	               0: disable write
@@ -695,23 +678,23 @@ void ide_set_reset(int on)
  */
 int eeprom_write_enable (unsigned dev_addr, int state)
 {
-	if (CFG_I2C_EEPROM_ADDR != dev_addr) {
+	if (CONFIG_SYS_I2C_EEPROM_ADDR != dev_addr) {
 		return -1;
 	} else {
 		switch (state) {
 		case 1:
 			/* Enable write access, clear bit GPIO_SINT2. */
-			out32(GPIO0_OR, in32(GPIO0_OR) & ~CFG_EEPROM_WP);
+			out32(GPIO0_OR, in32(GPIO0_OR) & ~CONFIG_SYS_EEPROM_WP);
 			state = 0;
 			break;
 		case 0:
 			/* Disable write access, set bit GPIO_SINT2. */
-			out32(GPIO0_OR, in32(GPIO0_OR) | CFG_EEPROM_WP);
+			out32(GPIO0_OR, in32(GPIO0_OR) | CONFIG_SYS_EEPROM_WP);
 			state = 0;
 			break;
 		default:
 			/* Read current status back. */
-			state = (0 == (in32(GPIO0_OR) & CFG_EEPROM_WP));
+			state = (0 == (in32(GPIO0_OR) & CONFIG_SYS_EEPROM_WP));
 			break;
 		}
 	}
@@ -725,21 +708,21 @@ int do_eep_wren (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 
 	if (query) {
 		/* Query write access state. */
-		state = eeprom_write_enable (CFG_I2C_EEPROM_ADDR, -1);
+		state = eeprom_write_enable (CONFIG_SYS_I2C_EEPROM_ADDR, -1);
 		if (state < 0) {
 			puts ("Query of write access state failed.\n");
 		} else {
 			printf ("Write access for device 0x%0x is %sabled.\n",
-				CFG_I2C_EEPROM_ADDR, state ? "en" : "dis");
+				CONFIG_SYS_I2C_EEPROM_ADDR, state ? "en" : "dis");
 			state = 0;
 		}
 	} else {
 		if ('0' == argv[1][0]) {
 			/* Disable write access. */
-			state = eeprom_write_enable (CFG_I2C_EEPROM_ADDR, 0);
+			state = eeprom_write_enable (CONFIG_SYS_I2C_EEPROM_ADDR, 0);
 		} else {
 			/* Enable write access. */
-			state = eeprom_write_enable (CFG_I2C_EEPROM_ADDR, 1);
+			state = eeprom_write_enable (CONFIG_SYS_I2C_EEPROM_ADDR, 1);
 		}
 		if (state < 0) {
 			puts ("Setup of write access state failed.\n");
@@ -752,7 +735,7 @@ int do_eep_wren (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 U_BOOT_CMD(eepwren,	2,	0,	do_eep_wren,
 	   "eepwren - Enable / disable / query EEPROM write access\n",
 	   NULL);
-#endif /* #if defined(CFG_EEPROM_WREN) */
+#endif /* #if defined(CONFIG_SYS_EEPROM_WREN) */
 
 
 #ifdef CONFIG_VIDEO_SM501
diff --git a/board/esd/hh405/u-boot.lds b/board/esd/hh405/u-boot.lds
index 21547ac27..9697cc6b3 100644
--- a/board/esd/hh405/u-boot.lds
+++ b/board/esd/hh405/u-boot.lds
@@ -72,7 +72,7 @@ SECTIONS
     lib_generic/zlib.o		(.text)
 
 /*    . = env_offset;*/
-/*    common/environment.o(.text)*/
+/*    common/env_embedded.o(.text)*/
 
     *(.text)
     *(.fixup)
@@ -143,6 +143,7 @@ SECTIONS
    *(.dynbss)
    *(.bss)
    *(COMMON)
+   . = ALIGN(4);
   }
   _end = . ;
   PROVIDE (end = .);
diff --git a/board/esd/hub405/flash.c b/board/esd/hub405/flash.c
index 89af1190a..274ada9fe 100644
--- a/board/esd/hub405/flash.c
+++ b/board/esd/hub405/flash.c
@@ -48,7 +48,7 @@ unsigned long flash_init (void)
 	int size_val = 0;
 
 	/* Init: no FLASHes known */
-	for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) {
+	for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
 		flash_info[i].flash_id = FLASH_UNKNOWN;
 	}
 
@@ -91,7 +91,7 @@ unsigned long flash_init (void)
 
 	/* Monitor protection ON by default */
 	(void)flash_protect(FLAG_PROTECT_SET,
-			    -CFG_MONITOR_LEN,
+			    -CONFIG_SYS_MONITOR_LEN,
 			    0xffffffff,
 			    &flash_info[0]);
 
diff --git a/board/esd/hub405/hub405.c b/board/esd/hub405/hub405.c
index 03b87c9df..8785e6c84 100644
--- a/board/esd/hub405/hub405.c
+++ b/board/esd/hub405/hub405.c
@@ -101,13 +101,6 @@ int board_early_init_f (void)
 	return 0;
 }
 
-
-int misc_init_f (void)
-{
-	return 0;  /* dummy implementation */
-}
-
-
 int misc_init_r (void)
 {
 	volatile unsigned char *duart0_mcr = (unsigned char *)((ulong)DUART0_BA + 4);
@@ -132,23 +125,23 @@ int misc_init_r (void)
 	 * Set RS232/RS422 control (RS232 = high on GPIO)
 	 */
 	val = in32(GPIO0_OR);
-	val &= ~(CFG_UART2_RS232 | CFG_UART3_RS232 | CFG_UART4_RS232 | CFG_UART5_RS232);
+	val &= ~(CONFIG_SYS_UART2_RS232 | CONFIG_SYS_UART3_RS232 | CONFIG_SYS_UART4_RS232 | CONFIG_SYS_UART5_RS232);
 
 	str = getenv("phys0");
 	if (!str || (str && (str[0] == '0')))
-		val |= CFG_UART2_RS232;
+		val |= CONFIG_SYS_UART2_RS232;
 
 	str = getenv("phys1");
 	if (!str || (str && (str[0] == '0')))
-		val |= CFG_UART3_RS232;
+		val |= CONFIG_SYS_UART3_RS232;
 
 	str = getenv("phys2");
 	if (!str || (str && (str[0] == '0')))
-		val |= CFG_UART4_RS232;
+		val |= CONFIG_SYS_UART4_RS232;
 
 	str = getenv("phys3");
 	if (!str || (str && (str[0] == '0')))
-		val |= CFG_UART5_RS232;
+		val |= CONFIG_SYS_UART5_RS232;
 
 	out32(GPIO0_OR, val);
 
@@ -181,9 +174,9 @@ int misc_init_r (void)
 	/*
 	 * Reset external DUARTs
 	 */
-	out32(GPIO0_OR, in32(GPIO0_OR) | CFG_DUART_RST); /* set reset to high */
+	out32(GPIO0_OR, in32(GPIO0_OR) | CONFIG_SYS_DUART_RST); /* set reset to high */
 	udelay(10); /* wait 10us */
-	out32(GPIO0_OR, in32(GPIO0_OR) & ~CFG_DUART_RST); /* set reset to low */
+	out32(GPIO0_OR, in32(GPIO0_OR) & ~CONFIG_SYS_DUART_RST); /* set reset to low */
 	udelay(1000); /* wait 1ms */
 
 	/*
@@ -227,14 +220,3 @@ int checkboard (void)
 
 	return 0;
 }
-
-
-phys_size_t initdram (int board_type)
-{
-	unsigned long val;
-
-	mtdcr(memcfga, mem_mb0cf);
-	val = mfdcr(memcfgd);
-
-	return (4*1024*1024 << ((val & 0x000e0000) >> 17));
-}
diff --git a/board/esd/hub405/u-boot.lds b/board/esd/hub405/u-boot.lds
index f21c7aad4..6908106c2 100644
--- a/board/esd/hub405/u-boot.lds
+++ b/board/esd/hub405/u-boot.lds
@@ -66,14 +66,14 @@ SECTIONS
     cpu/ppc4xx/4xx_uart.o	(.text)
     cpu/ppc4xx/cpu_init.o	(.text)
     cpu/ppc4xx/speed.o	(.text)
-    cpu/ppc4xx/4xx_enet.o	(.text)
+    drivers/net/4xx_enet.o	(.text)
     common/dlmalloc.o	(.text)
     lib_generic/crc32.o		(.text)
     lib_ppc/extable.o	(.text)
     lib_generic/zlib.o		(.text)
 
 /*    . = env_offset;*/
-/*    common/environment.o(.text)*/
+/*    common/env_embedded.o(.text)*/
 
     *(.text)
     *(.fixup)
@@ -143,6 +143,7 @@ SECTIONS
    *(.dynbss)
    *(.bss)
    *(COMMON)
+   . = ALIGN(4);
   }
   _end = . ;
   PROVIDE (end = .);
diff --git a/board/esd/mecp5200/mecp5200.c b/board/esd/mecp5200/mecp5200.c
index 6d776b7a6..31924502e 100644
--- a/board/esd/mecp5200/mecp5200.c
+++ b/board/esd/mecp5200/mecp5200.c
@@ -32,6 +32,7 @@
 #include <mpc5xxx.h>
 #include <pci.h>
 #include <command.h>
+#include <netdev.h>
 
 #include "mt46v16m16-75.h"
 
@@ -80,7 +81,7 @@ static void sdram_start(int hi_addr)
 
 /*
  * ATTENTION: Although partially referenced initdram does NOT make real use
- *            use of CFG_SDRAM_BASE. The code does not work if CFG_SDRAM_BASE
+ *            use of CONFIG_SYS_SDRAM_BASE. The code does not work if CONFIG_SYS_SDRAM_BASE
  *            is something else than 0x00000000.
  */
 
@@ -105,9 +106,9 @@ phys_size_t initdram(int board_type)
 
 	/* find RAM size using SDRAM CS0 only */
 	sdram_start(0);
-	test1 = get_ram_size(CFG_SDRAM_BASE, 0x80000000);
+	test1 = get_ram_size(CONFIG_SYS_SDRAM_BASE, 0x80000000);
 	sdram_start(1);
-	test2 = get_ram_size(CFG_SDRAM_BASE, 0x80000000);
+	test2 = get_ram_size(CONFIG_SYS_SDRAM_BASE, 0x80000000);
 
 	if (test1 > test2) {
 		sdram_start(0);
@@ -142,9 +143,9 @@ phys_size_t initdram(int board_type)
 #if 0
 	/* find RAM size using SDRAM CS1 only */
 	sdram_start(0);
-	get_ram_size((ulong *) (CFG_SDRAM_BASE + dramsize), 0x80000000);
+	get_ram_size((ulong *) (CONFIG_SYS_SDRAM_BASE + dramsize), 0x80000000);
 	sdram_start(1);
-	get_ram_size((ulong *) (CFG_SDRAM_BASE + dramsize), 0x80000000);
+	get_ram_size((ulong *) (CONFIG_SYS_SDRAM_BASE + dramsize), 0x80000000);
 	sdram_start(0);
 #endif
 	/* set SDRAM CS1 size according to the amount of RAM found */
@@ -174,14 +175,14 @@ void flash_preinit(void)
 
 void flash_afterinit(ulong size)
 {
-	if (size == CFG_FLASH_SIZE) {
+	if (size == CONFIG_SYS_FLASH_SIZE) {
 		/* adjust mapping */
 		*(vu_long *) MPC5XXX_BOOTCS_START =
 		    *(vu_long *) MPC5XXX_CS0_START =
-		    START_REG(CFG_BOOTCS_START | size);
+		    START_REG(CONFIG_SYS_BOOTCS_START | size);
 		*(vu_long *) MPC5XXX_BOOTCS_STOP =
 		    *(vu_long *) MPC5XXX_CS0_STOP =
-		    STOP_REG(CFG_BOOTCS_START | size, size);
+		    STOP_REG(CONFIG_SYS_BOOTCS_START | size, size);
 	}
 }
 
@@ -259,3 +260,8 @@ void init_power_switch(void)
 		__asm__ volatile ("sync");
 	}
 }
+
+int board_eth_init(bd_t *bis)
+{
+	return pci_eth_init(bis);
+}
diff --git a/board/esd/ocrtc/flash.c b/board/esd/ocrtc/flash.c
index c3d8bec91..e763a895e 100644
--- a/board/esd/ocrtc/flash.c
+++ b/board/esd/ocrtc/flash.c
@@ -48,7 +48,7 @@ unsigned long flash_init (void)
 	int size_val = 0;
 
 	/* Init: no FLASHes known */
-	for (i = 0; i < CFG_MAX_FLASH_BANKS; ++i) {
+	for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
 		flash_info[i].flash_id = FLASH_UNKNOWN;
 	}
 
diff --git a/board/esd/ocrtc/ocrtc.c b/board/esd/ocrtc/ocrtc.c
index 7b0edd595..35bfa95f2 100644
--- a/board/esd/ocrtc/ocrtc.c
+++ b/board/esd/ocrtc/ocrtc.c
@@ -62,13 +62,6 @@ int board_early_init_f (void)
 	return 0;
 }
 
-
-int misc_init_f (void)
-{
-	return 0;					/* dummy implementation */
-}
-
-
 /*
  * Check Board Identity:
  */
@@ -99,28 +92,3 @@ int checkboard (void)
 
 	return (0);
 }
-
-
-phys_size_t initdram (int board_type)
-{
-	unsigned long val;
-
-	mtdcr (memcfga, mem_mb0cf);
-	val = mfdcr (memcfgd);
-
-#if 0
-	printf ("\nmb0cf=%x\n", val);	/* test-only */
-	printf ("strap=%x\n", mfdcr (strap));	/* test-only */
-#endif
-
-	return (4 * 1024 * 1024 << ((val & 0x000e0000) >> 17));
-}
-
-
-int testdram (void)
-{
-	/* TODO: XXX XXX XXX */
-	printf ("test: 16 MB - ok\n");
-
-	return (0);
-}
diff --git a/board/esd/ocrtc/u-boot.lds b/board/esd/ocrtc/u-boot.lds
index 5fb969944..1fb754c50 100644
--- a/board/esd/ocrtc/u-boot.lds
+++ b/board/esd/ocrtc/u-boot.lds
@@ -72,7 +72,7 @@ SECTIONS
     lib_generic/zlib.o		(.text)
 
 /*    . = env_offset;*/
-/*    common/environment.o(.text)*/
+/*    common/env_embedded.o(.text)*/
 
     *(.text)
     *(.fixup)
@@ -143,6 +143,7 @@ SECTIONS
    *(.dynbss)
    *(.bss)
    *(COMMON)
+   . = ALIGN(4);
   }
   _end = . ;
   PROVIDE (end = .);
diff --git a/board/esd/pci405/cmd_pci405.c b/board/esd/pci405/cmd_pci405.c
index 5c717e253..f558a2bc6 100644
--- a/board/esd/pci405/cmd_pci405.c
+++ b/board/esd/pci405/cmd_pci405.c
@@ -32,13 +32,9 @@
 
 #include "pci405.h"
 
-
 #if defined(CONFIG_CMD_BSP)
 
 extern int do_bootm (cmd_tbl_t *, int, int, char *[]);
-extern int do_bootvx (cmd_tbl_t *, int, int, char *[]);
-unsigned long get_dcr(unsigned short);
-
 
 /*
  * Command loadpci: wait for signal from host and boot image.
@@ -97,33 +93,6 @@ int do_loadpci(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 	} else {
 		sprintf(addr, "%08x", *ptr);
 
-#if 0
-		/*
-		 * Boot image
-		 */
-		if (*ptr & 0x00000001) {
-			/*
-			 * Boot VxWorks image via bootvx
-			 */
-			addr[strlen(addr)-1] = '0';
-			printf("\nBooting VxWorks-Image at addr 0x%s ...\n", addr);
-			setenv("loadaddr", addr);
-
-			local_args[0] = argv[0];
-			local_args[1] = NULL;
-			status = do_bootvx (cmdtp, 0, 1, local_args);
-		} else {
-			/*
-			 * Boot image via bootm (normally Linux)
-			 */
-			printf("\nBooting Image at addr 0x%s ...\n", addr);
-			setenv("loadaddr", addr);
-
-			local_args[0] = argv[0];
-			local_args[1] = NULL;
-			status = do_bootm (cmdtp, 0, 1, local_args);
-		}
-#else
 		/*
 		 * Boot image via bootm
 		 */
@@ -133,7 +102,6 @@ int do_loadpci(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 		local_args[0] = argv[0];
 		local_args[1] = NULL;
 		status = do_bootm (cmdtp, 0, 1, local_args);
-#endif
 	}
 
 	return 0;
@@ -143,843 +111,4 @@ U_BOOT_CMD(
 	"loadpci - Wait for pci-image and boot it\n",
 	NULL
 );
-
-#endif
-
-#if 1 /* test-only */
-int do_getpci(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
-{
-	unsigned int val;
-	int i;
-
-	printf("\nPCI Configuration Regs for PPC405GP:");
-	for (i=0; i<0x64; i+=4) {
-		pci_read_config_dword(PCIDEVID_405GP, i, &val);
-		if (!(i % 0x10)) {
-			printf("\n%02x: ", i);
-		}
-		printf("%08x ", val);
-	}
-	printf("\n");
-
-	return 0;
-}
-U_BOOT_CMD(
-	getpci,	1,	1,	do_getpci,
-	"getpci  - Print own pci configuration registers\n",
-	NULL
-);
-
-int do_setpci(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
-{
-	unsigned int addr;
-	unsigned int val;
-
-	addr = simple_strtol (argv[1], NULL, 16);
-	val = simple_strtol (argv[2], NULL, 16);
-
-	printf("\nWriting %08x to PCI reg %08x.\n", val, addr);
-	pci_write_config_dword(PCIDEVID_405GP, addr, val);
-
-	return 0;
-}
-U_BOOT_CMD(
-	setpci,	3,	1,	do_setpci,
-	"setpci  - Set one pci configuration lword\n",
-	"<addr> <val>\n"
-	"        - Write pci configuration lword <val> to <addr>.\n"
-);
-
-int do_dumpdcr(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
-{
-	int i;
-
-	printf("\nDevice Configuration Registers (DCR's) for PPC405GP:");
-	for (i=0; i<=0x1e0; i++) {
-		if (!(i % 0x8)) {
-			printf("\n%04x ", i);
-		}
-		printf("%08lx ", get_dcr(i));
-	}
-	printf("\n");
-
-	return 0;
-}
-U_BOOT_CMD(
-	dumpdcr,	1,	1,	do_dumpdcr,
-	"dumpdcr - Dump all DCR registers\n",
-	NULL
-);
-
-
-int do_dumpspr(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
-{
-	printf("\nSpecial Purpose Registers (SPR's) for PPC405GP:");
-	printf("\n%04x %08x ", 947, mfspr(947));
-	printf("\n%04x %08x ", 9, mfspr(9));
-	printf("\n%04x %08x ", 1014, mfspr(1014));
-	printf("\n%04x %08x ", 1015, mfspr(1015));
-	printf("\n%04x %08x ", 1010, mfspr(1010));
-	printf("\n%04x %08x ", 957, mfspr(957));
-	printf("\n%04x %08x ", 1008, mfspr(1008));
-	printf("\n%04x %08x ", 1018, mfspr(1018));
-	printf("\n%04x %08x ", 954, mfspr(954));
-	printf("\n%04x %08x ", 950, mfspr(950));
-	printf("\n%04x %08x ", 951, mfspr(951));
-	printf("\n%04x %08x ", 981, mfspr(981));
-	printf("\n%04x %08x ", 980, mfspr(980));
-	printf("\n%04x %08x ", 982, mfspr(982));
-	printf("\n%04x %08x ", 1012, mfspr(1012));
-	printf("\n%04x %08x ", 1013, mfspr(1013));
-	printf("\n%04x %08x ", 948, mfspr(948));
-	printf("\n%04x %08x ", 949, mfspr(949));
-	printf("\n%04x %08x ", 1019, mfspr(1019));
-	printf("\n%04x %08x ", 979, mfspr(979));
-	printf("\n%04x %08x ", 8, mfspr(8));
-	printf("\n%04x %08x ", 945, mfspr(945));
-	printf("\n%04x %08x ", 987, mfspr(987));
-	printf("\n%04x %08x ", 287, mfspr(287));
-	printf("\n%04x %08x ", 953, mfspr(953));
-	printf("\n%04x %08x ", 955, mfspr(955));
-	printf("\n%04x %08x ", 272, mfspr(272));
-	printf("\n%04x %08x ", 273, mfspr(273));
-	printf("\n%04x %08x ", 274, mfspr(274));
-	printf("\n%04x %08x ", 275, mfspr(275));
-	printf("\n%04x %08x ", 260, mfspr(260));
-	printf("\n%04x %08x ", 276, mfspr(276));
-	printf("\n%04x %08x ", 261, mfspr(261));
-	printf("\n%04x %08x ", 277, mfspr(277));
-	printf("\n%04x %08x ", 262, mfspr(262));
-	printf("\n%04x %08x ", 278, mfspr(278));
-	printf("\n%04x %08x ", 263, mfspr(263));
-	printf("\n%04x %08x ", 279, mfspr(279));
-	printf("\n%04x %08x ", 26, mfspr(26));
-	printf("\n%04x %08x ", 27, mfspr(27));
-	printf("\n%04x %08x ", 990, mfspr(990));
-	printf("\n%04x %08x ", 991, mfspr(991));
-	printf("\n%04x %08x ", 956, mfspr(956));
-	printf("\n%04x %08x ", 284, mfspr(284));
-	printf("\n%04x %08x ", 285, mfspr(285));
-	printf("\n%04x %08x ", 986, mfspr(986));
-	printf("\n%04x %08x ", 984, mfspr(984));
-	printf("\n%04x %08x ", 256, mfspr(256));
-	printf("\n%04x %08x ", 1, mfspr(1));
-	printf("\n%04x %08x ", 944, mfspr(944));
-	printf("\n");
-
-	return 0;
-}
-U_BOOT_CMD(
-	dumpspr,	1,	1,	do_dumpspr,
-	"dumpspr - Dump all SPR registers\n",
-	NULL
-);
-
-
-#define PCI0_BRDGOPT1 0x4a
-#define plb0_acr      0x87
-
-int do_getplb(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
-{
-	unsigned short val;
-
-	printf("PLB0_ACR=%08lx\n", get_dcr(0x87));
-	pci_read_config_word(PCIDEVID_405GP, PCI0_BRDGOPT1, &val);
-	printf("PCI0_BRDGOPT1=%04x\n", val);
-	printf("CCR0=%08x\n", mfspr(ccr0));
-
-	return 0;
-}
-U_BOOT_CMD(
-	getplb,	1,	1,	do_getplb,
-	"getplb  - Dump all plb arbiter registers\n",
-	NULL
-);
-
-int do_setplb(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
-{
-	unsigned int my_acr;
-	unsigned int my_brdgopt1;
-	unsigned int my_ccr0;
-
-	my_acr = simple_strtol (argv[1], NULL, 16);
-	my_brdgopt1 = simple_strtol (argv[2], NULL, 16);
-	my_ccr0 = simple_strtol (argv[3], NULL, 16);
-
-	mtdcr(plb0_acr, my_acr);
-	pci_write_config_word(PCIDEVID_405GP, PCI0_BRDGOPT1, my_brdgopt1);
-	mtspr(ccr0, my_ccr0);
-
-	return 0;
-}
-U_BOOT_CMD(
-	setplb,	4,	1,	do_setplb,
-	"setplb  - Set all plb arbiter registers\n",
-	"PLB0_ACR PCI0_BRDGOPT1 CCR0\n"
-	"        - Set all plb arbiter registers\n"
-);
-
-
-/***********************************************************************
- *
- * The following code is only for test purposes!!!!
- * Please ignore this ugly stuff!!!!!!!!!!!!!!!!!!!
- *
- ***********************************************************************/
-
-#define PCI_ADDR 0xc0000000
-
-int do_writepci(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
-{
-	unsigned int addr;
-	unsigned int size;
-	unsigned int countmax;
-	int i;
-	int max;
-	volatile unsigned long *ptr;
-	volatile unsigned long val;
-	int loopcount = 0;
-	int test_pci_read = 0;
-	int test_pci_cfg_write = 0;
-	int test_sync = 0;
-	int test_pci_pre_read = 0;
-
-	addr = simple_strtol (argv[1], NULL, 16);
-	size = simple_strtol (argv[2], NULL, 16);
-	countmax = simple_strtol (argv[3], NULL, 16);
-	if (countmax == 0)
-		countmax = 1000;
-
-	do_getplb(NULL, 0, 0, NULL);
-
-#if 0
-	out32r(PMM0LA, 0);
-	out32r(PMM0PCILA, 0);
-	out32r(PMM0PCIHA, 0);
-	out32r(PMM0MA, 0);
-	out32r(PMM1LA, PCI_ADDR);
-	out32r(PMM1PCILA, addr & 0xff000000);
-	out32r(PMM1PCIHA, 0x00000000);
-	out32r(PMM1MA, 0xff000001);
-#endif
-
-	printf("PMM1LA    =%08lx\n", in32r(PMM1LA));
-	printf("PMM1MA    =%08lx\n", in32r(PMM1MA));
-	printf("PMM1PCILA =%08lx\n", in32r(PMM1PCILA));
-	printf("PMM1PCIHA =%08lx\n", in32r(PMM1PCIHA));
-
-	addr = PCI_ADDR | (addr & 0x00ffffff);
-	printf("\nWriting at addr %08x, size %08x (countmax=%x)\n", addr, size, countmax);
-
-	max = size >> 2;
-
-	pci_write_config_word(PCIDEVID_405GP, 0x04, 0x0106); /* write command reg */
-
-	val = *(ulong *)0x00000000;
-	if (val & 0x00000008) {
-		test_pci_pre_read = 1;
-		printf("Running test with pre pci-memory-read access!\n");
-	}
-	if (val & 0x00000004) {
-		test_sync = 1;
-		printf("Running test with sync instruction!\n");
-	}
-	if (val & 0x00000001) {
-		test_pci_read = 1;
-		printf("Running test with pci-memory-read access!\n");
-	}
-	if (val & 0x00000002) {
-		test_pci_cfg_write = 1;
-		printf("Running test with pci-config-write access!\n");
-	}
-
-	while (1) {
-
-		if (test_pci_pre_read) {
-			/*
-			 * Read one value back
-			 */
-			ptr = (volatile unsigned long *)addr;
-			val = *ptr;
-		}
-
-		/*
-		 * Write some values to host via pci busmastering
-		 */
-		ptr = (volatile unsigned long *)addr;
-		for (i=0; i<max; i++) {
-			*ptr++ = i;
-		}
-
-		if (test_sync) {
-			/*
-			 * Sync previous writes
-			 */
-			ppcSync();
-		}
-
-		if (test_pci_read) {
-			/*
-			 * Read one value back
-			 */
-			ptr = (volatile unsigned long *)addr;
-			val = *ptr;
-		}
-
-		if (test_pci_cfg_write) {
-			/*
-			 * Generate IRQ to host via config regs
-			 */
-			pci_write_config_byte(PCIDEVID_405GP, 0x44, 0x00);
-		}
-
-		if (loopcount++ > countmax) {
-			/* Abort if ctrl-c was pressed */
-			if (ctrlc()) {
-				puts("\nAbort\n");
-				return 0;
-			}
-
-			putc('.');
-
-			loopcount = 0;
-		}
-	}
-
-	return 0;
-}
-U_BOOT_CMD(
-	writepci,	4,	1,	do_writepci,
-	"writepci - Write some data to pcibus\n",
-	"<addr> <size>\n"
-	"        - Write some data to pcibus.\n"
-);
-
-#define PCI_CFGADDR        0xeec00000
-#define PCI_CFGDATA        0xeec00004
-
-int ibmPciConfigWrite
-(
-	int offset,     /* offset into the configuration space */
-	int width,      /* data width                          */
-	unsigned int data       /* data to be written                  */
-	)
-{
-	/*
-	 * Write config register address to the PCI config address register
-	 * bit 31 must be 1 and bits 1:0 must be 0 (note LE bit notation)
-	 */
-	out32r(PCI_CFGADDR, 0x80000000 | (offset & 0xFFFFFFFC));
-
-#if 0 /* test-only */
-	ppcSync();
-#endif
-
-	/*
-	 * Write value to be written to the PCI config data register
-	 */
-	switch ( width ) {
-	case 1: out32r(PCI_CFGDATA | (offset & 0x3), (unsigned char)(data & 0xFF));
-		break;
-	case 2: out32r(PCI_CFGDATA | (offset & 0x3), (unsigned short)(data & 0xFFFF));
-		break;
-	case 4:	out32r(PCI_CFGDATA | (offset & 0x3), data);
-		break;
-	}
-
-	return (0);
-}
-
-int do_writepci2(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
-{
-	unsigned int addr;
-	unsigned int size;
-	unsigned int countmax;
-	int max;
-	volatile unsigned long *ptr;
-	volatile unsigned long val;
-	int loopcount = 0;
-
-	addr = simple_strtol (argv[1], NULL, 16);
-	size = simple_strtol (argv[2], NULL, 16);
-	countmax = simple_strtol (argv[3], NULL, 16);
-	if (countmax == 0)
-		countmax = 1000;
-
-	do_getplb(NULL, 0, 0, NULL);
-
-#if 0
-	out32r(PMM0LA, 0);
-	out32r(PMM0PCILA, 0);
-	out32r(PMM0PCIHA, 0);
-	out32r(PMM0MA, 0);
-	out32r(PMM1LA, PCI_ADDR);
-	out32r(PMM1PCILA, addr & 0xff000000);
-	out32r(PMM1PCIHA, 0x00000000);
-	out32r(PMM1MA, 0xff000001);
-#endif
-
-	printf("PMM1LA    =%08lx\n", in32r(PMM1LA));
-	printf("PMM1MA    =%08lx\n", in32r(PMM1MA));
-	printf("PMM1PCILA =%08lx\n", in32r(PMM1PCILA));
-	printf("PMM1PCIHA =%08lx\n", in32r(PMM1PCIHA));
-
-	addr = PCI_ADDR | (addr & 0x00ffffff);
-	printf("\nWriting at addr %08x, size %08x (countmax=%x)\n", addr, size, countmax);
-
-	max = size >> 2;
-
-	pci_write_config_word(PCIDEVID_405GP, 0x04, 0x0106); /* write command reg */
-
-	while (1) {
-
-		/*
-		 * Write one values to host via pci busmastering
-		 */
-		ptr = (volatile unsigned long *)addr;
-		*ptr = 0x01234567;
-
-		/*
-		 * Read one value back
-		 */
-		ptr = (volatile unsigned long *)addr;
-		val = *ptr;
-
-		/*
-		 * One pci config write
-		 */
-/*		pci_write_config_byte(PCIDEVID_405GP, 0x44, 0x00); */
-/*		ibmPciConfigWrite(0x44, 1, 0x00); */
-		ibmPciConfigWrite(0x2e, 2, 0x1234); /* subsystem id */
-
-		if (loopcount++ > countmax) {
-			/* Abort if ctrl-c was pressed */
-			if (ctrlc()) {
-				puts("\nAbort\n");
-				return 0;
-			}
-
-			putc('.');
-
-			loopcount = 0;
-		}
-	}
-
-	return 0;
-}
-U_BOOT_CMD(
-	writepci2,	4,	1,	do_writepci2,
-	"writepci2- Write some data to pcibus\n",
-	"<addr> <size>\n"
-	"        - Write some data to pcibus.\n"
-);
-
-int do_writepci22(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
-{
-	unsigned int addr;
-	unsigned int size;
-	unsigned int countmax = 0;
-	volatile unsigned long *ptr;
-	volatile unsigned long val;
-
-	addr = simple_strtol (argv[1], NULL, 16);
-	size = simple_strtol (argv[2], NULL, 16);
-
-	addr = PCI_ADDR | (addr & 0x00ffffff);
-	printf("\nWriting at addr %08x, size %08x (countmax=%x)\n", addr, size, countmax);
-	pci_write_config_word(PCIDEVID_405GP, 0x04, 0x0106); /* write command reg */
-
-	while (1) {
-
-		/*
-		 * Write one values to host via pci busmastering
-		 */
-		ptr = (volatile unsigned long *)addr;
-		*ptr = 0x01234567;
-
-		/*
-		 * Read one value back
-		 */
-		ptr = (volatile unsigned long *)addr;
-		val = *ptr;
-
-		/*
-		 * One pci config write
-		 */
-		ibmPciConfigWrite(0x2e, 2, 0x1234); /* subsystem id */
-	}
-
-	return 0;
-}
-U_BOOT_CMD(
-	writepci22,	4,	1,	do_writepci22,
-	"writepci22- Write some data to pcibus\n",
-	"<addr> <size>\n"
-	"        - Write some data to pcibus.\n"
-);
-
-int ibmPciConfigWrite3
-(
-	int offset,     /* offset into the configuration space */
-	int width,      /* data width                          */
-	unsigned int data       /* data to be written                  */
-	)
-{
-	/*
-	 * Write config register address to the PCI config address register
-	 * bit 31 must be 1 and bits 1:0 must be 0 (note LE bit notation)
-	 */
-	out32r(PCI_CFGADDR, 0x80000000 | (offset & 0xFFFFFFFC));
-
-#if 1 /* test-only */
-	ppcSync();
-#endif
-
-	/*
-	 * Write value to be written to the PCI config data register
-	 */
-	switch ( width ) {
-	case 1: out32r(PCI_CFGDATA | (offset & 0x3), (unsigned char)(data & 0xFF));
-		break;
-	case 2: out32r(PCI_CFGDATA | (offset & 0x3), (unsigned short)(data & 0xFFFF));
-		break;
-	case 4:	out32r(PCI_CFGDATA | (offset & 0x3), data);
-		break;
-	}
-
-	return (0);
-}
-
-int do_writepci3(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
-{
-	unsigned int addr;
-	unsigned int size;
-	unsigned int countmax;
-	int max;
-	volatile unsigned long *ptr;
-	volatile unsigned long val;
-	int loopcount = 0;
-
-	addr = simple_strtol (argv[1], NULL, 16);
-	size = simple_strtol (argv[2], NULL, 16);
-	countmax = simple_strtol (argv[3], NULL, 16);
-	if (countmax == 0)
-		countmax = 1000;
-
-	do_getplb(NULL, 0, 0, NULL);
-
-#if 0
-	out32r(PMM0LA, 0);
-	out32r(PMM0PCILA, 0);
-	out32r(PMM0PCIHA, 0);
-	out32r(PMM0MA, 0);
-	out32r(PMM1LA, PCI_ADDR);
-	out32r(PMM1PCILA, addr & 0xff000000);
-	out32r(PMM1PCIHA, 0x00000000);
-	out32r(PMM1MA, 0xff000001);
-#endif
-
-	printf("PMM1LA    =%08lx\n", in32r(PMM1LA));
-	printf("PMM1MA    =%08lx\n", in32r(PMM1MA));
-	printf("PMM1PCILA =%08lx\n", in32r(PMM1PCILA));
-	printf("PMM1PCIHA =%08lx\n", in32r(PMM1PCIHA));
-
-	addr = PCI_ADDR | (addr & 0x00ffffff);
-	printf("\nWriting at addr %08x, size %08x (countmax=%x)\n", addr, size, countmax);
-
-	max = size >> 2;
-
-	pci_write_config_word(PCIDEVID_405GP, 0x04, 0x0106); /* write command reg */
-
-	while (1) {
-
-		/*
-		 * Write one values to host via pci busmastering
-		 */
-		ptr = (volatile unsigned long *)addr;
-		*ptr = 0x01234567;
-
-		/*
-		 * Read one value back
-		 */
-		ptr = (volatile unsigned long *)addr;
-		val = *ptr;
-
-		/*
-		 * One pci config write
-		 */
-/*		pci_write_config_byte(PCIDEVID_405GP, 0x44, 0x00); */
-/*		ibmPciConfigWrite(0x44, 1, 0x00); */
-		ibmPciConfigWrite3(0x2e, 2, 0x1234); /* subsystem id */
-
-		if (loopcount++ > countmax) {
-			/* Abort if ctrl-c was pressed */
-			if (ctrlc()) {
-				puts("\nAbort\n");
-				return 0;
-			}
-
-			putc('.');
-
-			loopcount = 0;
-		}
-	}
-
-	return 0;
-}
-U_BOOT_CMD(
-	writepci3,	4,	1,	do_writepci3,
-	"writepci3- Write some data to pcibus\n",
-	"<addr> <size>\n"
-	"        - Write some data to pcibus.\n"
-);
-
-
-#define SECTOR_SIZE	32		/* 32 byte cache line */
-#define SECTOR_MASK	0x1F
-
-void my_flush_dcache(ulong lcl_addr, ulong count)
-{
-  unsigned int lcl_target;
-
-  /* promote to nearest cache sector */
-  lcl_target =  (lcl_addr + count + SECTOR_SIZE - 1) & ~SECTOR_MASK;
-  lcl_addr &= ~SECTOR_MASK;
-  while (lcl_addr != lcl_target)
-    {
-      /*      ppcDcbf((void *)lcl_addr);*/
-      __asm__("dcbf 0,%0": :"r" (lcl_addr));
-      lcl_addr += SECTOR_SIZE;
-    }
-  __asm__("sync");		/* Always flush prefetch queue in any case */
-}
-
-int do_writepci_cache(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
-{
-	unsigned int addr;
-	unsigned int size;
-	unsigned int countmax;
-	int i;
-	volatile unsigned long *ptr;
-	volatile unsigned long val;
-	int loopcount = 0;
-
-	addr = simple_strtol (argv[1], NULL, 16);
-	size = simple_strtol (argv[2], NULL, 16);
-	countmax = simple_strtol (argv[3], NULL, 16);
-	if (countmax == 0)
-		countmax = 1000;
-
-	do_getplb(NULL, 0, 0, NULL);
-
-#if 0
-	out32r(PMM0LA, 0);
-	out32r(PMM0PCILA, 0);
-	out32r(PMM0PCIHA, 0);
-	out32r(PMM0MA, 0);
-	out32r(PMM1LA, PCI_ADDR);
-	out32r(PMM1PCILA, addr & 0xff000000);
-	out32r(PMM1PCIHA, 0x00000000);
-	out32r(PMM1MA, 0xff000001);
-#endif
-
-	printf("PMM1LA    =%08lx\n", in32r(PMM1LA));
-	printf("PMM1MA    =%08lx\n", in32r(PMM1MA));
-	printf("PMM1PCILA =%08lx\n", in32r(PMM1PCILA));
-	printf("PMM1PCIHA =%08lx\n", in32r(PMM1PCIHA));
-
-	addr = PCI_ADDR | (addr & 0x00ffffff);
-	printf("\nWriting at addr %08x, size %08x (countmax=%x)\n", addr, size, countmax);
-
-	pci_write_config_word(PCIDEVID_405GP, 0x04, 0x0106); /* write command reg */
-
-	i = 0;
-
-	/*
-	 * Set pci region as cachable
-	 */
-	ppcSync();
-	__asm__ volatile ("	addis	4,0,0x0000 ");
-	__asm__ volatile ("	addi	4,4,0x0080 ");
-	__asm__ volatile ("	mtdccr	4 ");
-	ppcSync();
-
-	while (1) {
-
-		/*
-		 * Write one values to host via pci busmastering
-		 */
-		ptr = (volatile unsigned long *)addr;
-		printf("A\n"); /* test-only */
-		*ptr++ = i++;
-		*ptr++ = i++;
-		*ptr++ = i++;
-		*ptr++ = i++;
-		*ptr++ = i++;
-		*ptr++ = i++;
-		*ptr++ = i++;
-		*ptr++ = i++;
-		printf("B\n"); /* test-only */
-		my_flush_dcache(addr, 32);
-		printf("C\n"); /* test-only */
-
-		/*
-		 * Read one value back
-		 */
-		ptr = (volatile unsigned long *)addr;
-		val = *ptr;
-		printf("D\n"); /* test-only */
-
-		/*
-		 * One pci config write
-		 */
-/*		pci_write_config_byte(PCIDEVID_405GP, 0x44, 0x00); */
-/*		ibmPciConfigWrite(0x44, 1, 0x00); */
-		ibmPciConfigWrite3(0x2e, 2, 0x1234); /* subsystem id */
-		printf("E\n"); /* test-only */
-
-		if (loopcount++ > countmax) {
-			/* Abort if ctrl-c was pressed */
-			if (ctrlc()) {
-				puts("\nAbort\n");
-				return 0;
-			}
-
-			putc('.');
-
-			loopcount = 0;
-		}
-	}
-
-	return 0;
-}
-U_BOOT_CMD(
-	writepci_cache,	4,	1,	do_writepci_cache,
-	"writepci_cache - Write some data to pcibus\n",
-	"<addr> <size>\n"
-	"        - Write some data to pcibus.\n"
-);
-
-int do_savepci(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
-{
-	unsigned int *ptr;
-	int i;
-
-	/*
-	 * Save own pci configuration in PRAM
-	 */
-	memset((char *)PCI_REGS_ADDR, 0, PCI_REGS_LEN);
-	ptr = (unsigned int *)PCI_REGS_ADDR + 1;
-	for (i=0; i<0x40; i+=4) {
-		pci_read_config_dword(PCIDEVID_405GP, i, ptr++);
-	}
-	ptr = (unsigned int *)PCI_REGS_ADDR;
-	*ptr = crc32(0, (uchar *)PCI_REGS_ADDR+4, PCI_REGS_LEN-4);
-
-	printf("\nStoring PCI Configuration Regs...\n");
-
-	return 0;
-}
-U_BOOT_CMD(
-	savepci,	4,	1,	do_savepci,
-	"savepci  - Save all pci regs\n",
-	"<addr> <size>\n"
-	"        - Write some data to pcibus.\n"
-);
-
-int do_restorepci(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
-{
-	unsigned int *ptr;
-	int i;
-
-	/*
-	 * Rewrite pci config regs (only after soft-reset with magic set)
-	 */
-	ptr = (unsigned int *)PCI_REGS_ADDR;
-	if (crc32(0, (uchar *)PCI_REGS_ADDR+4, PCI_REGS_LEN-4) == *ptr) {
-		puts("Restoring PCI Configurations Regs!\n");
-		ptr = (unsigned int *)PCI_REGS_ADDR + 1;
-		for (i=0; i<0x40; i+=4) {
-			pci_write_config_dword(PCIDEVID_405GP, i, *ptr++);
-		}
-	}
-	mtdcr(uicsr, 0xFFFFFFFF);        /* clear all ints */
-
-	return 0;
-}
-U_BOOT_CMD(
-	restorepci,	4,	1,	do_restorepci,
-	"restorepci  - Restore all pci regs\n",
-	"<addr> <size>\n"
-	"        - Write some data to pcibus.\n"
-);
-
-
-extern void write_without_sync(void);
-extern void write_with_sync(void);
-extern void write_with_less_sync(void);
-extern void write_with_more_sync(void);
-
-/*
- * code from IBM-PPCSUPP
- */
-int do_writeibm1(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
-{
-	pci_write_config_word(PCIDEVID_405GP, 0x04, 0x0106); /* write command reg */
-
-	write_without_sync();
-
-	return 0;
-}
-U_BOOT_CMD(
-	writeibm1,	4,	1,	do_writeibm1,
-	"writeibm1- Write some data to pcibus (without sync)\n",
-	"<addr> <size>\n"
-	"        - Write some data to pcibus.\n"
-);
-
-int do_writeibm2(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
-{
-	pci_write_config_word(PCIDEVID_405GP, 0x04, 0x0106); /* write command reg */
-
-	write_with_sync();
-
-	return 0;
-}
-U_BOOT_CMD(
-	writeibm2,	4,	1,	do_writeibm2,
-	"writeibm2- Write some data to pcibus (with sync)\n",
-	"<addr> <size>\n"
-	"        - Write some data to pcibus.\n"
-);
-
-int do_writeibm22(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
-{
-	pci_write_config_word(PCIDEVID_405GP, 0x04, 0x0106); /* write command reg */
-
-	write_with_less_sync();
-
-	return 0;
-}
-U_BOOT_CMD(
-	writeibm22,	4,	1,	do_writeibm22,
-	"writeibm22- Write some data to pcibus (with less sync)\n",
-	"<addr> <size>\n"
-	"        - Write some data to pcibus.\n"
-);
-
-int do_writeibm3(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
-{
-	pci_write_config_word(PCIDEVID_405GP, 0x04, 0x0106); /* write command reg */
-
-	write_with_more_sync();
-
-	return 0;
-}
-U_BOOT_CMD(
-	writeibm3,	4,	1,	do_writeibm3,
-	"writeibm3- Write some data to pcibus (with more sync)\n",
-	"<addr> <size>\n"
-	"        - Write some data to pcibus.\n"
-);
 #endif
diff --git a/board/esd/pci405/flash.c b/board/esd/pci405/flash.c
index 3b21781d7..905848380 100644
--- a/board/esd/pci405/flash.c
+++ b/board/esd/pci405/flash.c
@@ -48,7 +48,7 @@ unsigned long flash_init (void)
 	int size_val = 0;
 
 	/* Init: no FLASHes known */
-	for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) {
+	for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
 		flash_info[i].flash_id = FLASH_UNKNOWN;
 	}
 
diff --git a/board/esd/pci405/pci405.c b/board/esd/pci405/pci405.c
index f740d595b..42774ad20 100644
--- a/board/esd/pci405/pci405.c
+++ b/board/esd/pci405/pci405.c
@@ -27,6 +27,7 @@
 #include <malloc.h>
 #include <pci.h>
 #include <asm/4xx_pci.h>
+#include <asm/io.h>
 
 #include "pci405.h"
 
@@ -34,7 +35,7 @@ DECLARE_GLOBAL_DATA_PTR;
 
 /* Prototypes */
 int gunzip(void *, int, unsigned char *, unsigned long *);
-int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);/*cmd_boot.c*/
+int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
 unsigned long fpga_done_state(void);
 unsigned long fpga_init_state(void);
 
@@ -57,11 +58,11 @@ const unsigned char fpgadata[] =
  */
 #include "../common/fpga.c"
 
-#define FPGA_DONE_STATE_V11 (in32(GPIO0_IR) & CFG_FPGA_DONE)
-#define FPGA_DONE_STATE_V12 (in32(GPIO0_IR) & CFG_FPGA_DONE_V12)
+#define FPGA_DONE_STATE_V11 (in_be32((void*)GPIO0_IR) & CONFIG_SYS_FPGA_DONE)
+#define FPGA_DONE_STATE_V12 (in_be32((void*)GPIO0_IR) & CONFIG_SYS_FPGA_DONE_V12)
 
-#define FPGA_INIT_STATE_V11 (in32(GPIO0_IR) & CFG_FPGA_INIT)
-#define FPGA_INIT_STATE_V12 (in32(GPIO0_IR) & CFG_FPGA_INIT_V12)
+#define FPGA_INIT_STATE_V11 (in_be32((void*)GPIO0_IR) & CONFIG_SYS_FPGA_INIT)
+#define FPGA_INIT_STATE_V12 (in_be32((void*)GPIO0_IR) & CONFIG_SYS_FPGA_INIT_V12)
 
 
 int board_revision(void)
@@ -78,10 +79,10 @@ int board_revision(void)
 	 */
 	cntrl0Reg = mfdcr(cntrl0);
 	mtdcr(cntrl0, cntrl0Reg | 0x03000000);
-	out32(GPIO0_ODR, in32(GPIO0_ODR) & ~0x00100200);
-	out32(GPIO0_TCR, in32(GPIO0_TCR) & ~0x00100200);
+	out_be32((void*)GPIO0_ODR, in_be32((void*)GPIO0_ODR) & ~0x00100200);
+	out_be32((void*)GPIO0_TCR, in_be32((void*)GPIO0_TCR) & ~0x00100200);
 	udelay(1000);                   /* wait some time before reading input */
-	value = in32(GPIO0_IR) & 0x00100200;       /* get config bits */
+	value = in_be32((void*)GPIO0_IR) & 0x00100200;       /* get config bits */
 
 	/*
 	 * Restore GPIO settings
@@ -137,10 +138,10 @@ int board_early_init_f (void)
 	/*
 	 * First pull fpga-prg pin low, to disable fpga logic (on version 1.2 board)
 	 */
-	out32(GPIO0_ODR, 0x00000000);        /* no open drain pins      */
-	out32(GPIO0_TCR, CFG_FPGA_PRG);      /* setup for output        */
-	out32(GPIO0_OR,  CFG_FPGA_PRG);      /* set output pins to high */
-	out32(GPIO0_OR, 0);                  /* pull prg low            */
+	out_be32((void*)GPIO0_ODR, 0x00000000);        /* no open drain pins      */
+	out_be32((void*)GPIO0_TCR, CONFIG_SYS_FPGA_PRG);      /* setup for output        */
+	out_be32((void*)GPIO0_OR,  CONFIG_SYS_FPGA_PRG);      /* set output pins to high */
+	out_be32((void*)GPIO0_OR, 0);                  /* pull prg low            */
 
 	/*
 	 * IRQ 0-15  405GP internally generated; active high; level sensitive
@@ -181,15 +182,6 @@ int board_early_init_f (void)
 	return 0;
 }
 
-
-/* ------------------------------------------------------------------------- */
-
-int misc_init_f (void)
-{
-	return 0;  /* dummy implementation */
-}
-
-
 int misc_init_r (void)
 {
 	unsigned char *dst;
@@ -205,8 +197,8 @@ int misc_init_r (void)
 	 * FPGA can be gzip compressed (malloc) and booted this late.
 	 */
 
-	dst = malloc(CFG_FPGA_MAX_SIZE);
-	if (gunzip (dst, CFG_FPGA_MAX_SIZE, (uchar *)fpgadata, &len) != 0) {
+	dst = malloc(CONFIG_SYS_FPGA_MAX_SIZE);
+	if (gunzip (dst, CONFIG_SYS_FPGA_MAX_SIZE, (uchar *)fpgadata, &len) != 0) {
 		printf ("GUNZIP ERROR - must RESET board to recover\n");
 		do_reset (NULL, 0, 0, NULL);
 	}
@@ -284,13 +276,11 @@ int misc_init_r (void)
 		*magic = 0;      /* clear pci reconfig magic again */
 	}
 
-#if 1 /* test-only */
 	/*
 	 * Decrease PLB latency timeout and reduce priority of the PCI bridge master
 	 */
 #define PCI0_BRDGOPT1 0x4a
 	pci_write_config_word(PCIDEVID_405GP, PCI0_BRDGOPT1, 0x3f20);
-/*	pci_write_config_word(PCIDEVID_405GP, PCI0_BRDGOPT1, 0x3f60);	*/
 
 #define plb0_acr      0x87
 	/*
@@ -298,14 +288,6 @@ int misc_init_r (void)
 	 */
 	mtdcr(plb0_acr, 0x98000000);
 
-#if 0 /* test-only */
-	printf("CCR0=%08x\n", mfspr(ccr0)); /* test-only */
-/*	mtspr(ccr0, (mfspr(ccr0) & 0xff8fffff) | 0x00100000);	*/
-	mtspr(ccr0, (mfspr(ccr0) & 0xff8fffff) | 0x00000000);
-#endif
-/*	printf("CCR0=%08x\n", mfspr(ccr0)); */ /* test-only */
-#endif
-
 	free(dst);
 	return (0);
 }
@@ -314,7 +296,6 @@ int misc_init_r (void)
 /*
  * Check Board Identity:
  */
-
 int checkboard (void)
 {
 	char str[64];
@@ -340,14 +321,14 @@ int checkboard (void)
 		 */
 		cntrl0Reg = mfdcr(cntrl0);
 		mtdcr(cntrl0, cntrl0Reg & ~0x08000000);
-		out32(GPIO0_ODR, in32(GPIO0_ODR) & ~0x40000000);
-		out32(GPIO0_TCR, in32(GPIO0_TCR) & ~0x40000000);
+		out_be32((void*)GPIO0_ODR, in_be32((void*)GPIO0_ODR) & ~0x40000000);
+		out_be32((void*)GPIO0_TCR, in_be32((void*)GPIO0_TCR) & ~0x40000000);
 		udelay(1000);                   /* wait some time before reading input */
-		value = in32(GPIO0_IR) & 0x40000000;       /* get config bits */
+		value = in_be32((void*)GPIO0_IR) & 0x40000000;       /* get config bits */
 		if (value) {
 			puts(", 33 MHz PCI");
 		} else {
-			puts(", 66 Mhz PCI");
+			puts(", 66 MHz PCI");
 		}
 	}
 
@@ -357,37 +338,6 @@ int checkboard (void)
 }
 
 /* ------------------------------------------------------------------------- */
-
-phys_size_t initdram (int board_type)
-{
-	unsigned long val;
-
-	mtdcr(memcfga, mem_mb0cf);
-	val = mfdcr(memcfgd);
-
-#if 0
-	printf("\nmb0cf=%x\n", val); /* test-only */
-	printf("strap=%x\n", mfdcr(strap)); /* test-only */
-#endif
-
-#if 0 /* test-only: all PCI405 version must report 16mb */
-	return (4*1024*1024 << ((val & 0x000e0000) >> 17));
-#else
-	return (16*1024*1024);
-#endif
-}
-
-/* ------------------------------------------------------------------------- */
-
-int testdram (void)
-{
-	/* TODO: XXX XXX XXX */
-	printf ("test: 16 MB - ok\n");
-
-	return (0);
-}
-
-/* ------------------------------------------------------------------------- */
 int wpeeprom(int wp)
 {
 	int wp_state = wp;
diff --git a/board/esd/pci405/u-boot.lds b/board/esd/pci405/u-boot.lds
index 21547ac27..9697cc6b3 100644
--- a/board/esd/pci405/u-boot.lds
+++ b/board/esd/pci405/u-boot.lds
@@ -72,7 +72,7 @@ SECTIONS
     lib_generic/zlib.o		(.text)
 
 /*    . = env_offset;*/
-/*    common/environment.o(.text)*/
+/*    common/env_embedded.o(.text)*/
 
     *(.text)
     *(.fixup)
@@ -143,6 +143,7 @@ SECTIONS
    *(.dynbss)
    *(.bss)
    *(COMMON)
+   . = ALIGN(4);
   }
   _end = . ;
   PROVIDE (end = .);
diff --git a/board/esd/pf5200/flash.c b/board/esd/pf5200/flash.c
index 53afbc0b9..985044546 100644
--- a/board/esd/pf5200/flash.c
+++ b/board/esd/pf5200/flash.c
@@ -23,7 +23,7 @@
 
 #include <common.h>
 
-flash_info_t flash_info[CFG_MAX_FLASH_BANKS];	/* info for FLASH chips */
+flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];	/* info for FLASH chips */
 
 typedef unsigned short FLASH_PORT_WIDTH;
 typedef volatile unsigned short FLASH_PORT_WIDTHV;
@@ -60,7 +60,7 @@ unsigned long flash_init(void)
 	extern void flash_preinit(void);
 	extern void flash_afterinit(uint, ulong, ulong);
 
-	ulong flashbase = CFG_FLASH_BASE;
+	ulong flashbase = CONFIG_SYS_FLASH_BASE;
 
 	flash_preinit();
 
@@ -69,18 +69,18 @@ unsigned long flash_init(void)
 	flash_info[i].size = flash_get_size((FPW *) flashbase, &flash_info[i]);
 	size += flash_info[i].size;
 
-#if CFG_MONITOR_BASE >= CFG_FLASH_BASE
+#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE
 	/* monitor protection ON by default */
-	flash_protect(FLAG_PROTECT_SET, CFG_MONITOR_BASE,
-		      CFG_MONITOR_BASE + monitor_flash_len - 1,
-		      flash_get_info(CFG_MONITOR_BASE));
+	flash_protect(FLAG_PROTECT_SET, CONFIG_SYS_MONITOR_BASE,
+		      CONFIG_SYS_MONITOR_BASE + monitor_flash_len - 1,
+		      flash_get_info(CONFIG_SYS_MONITOR_BASE));
 #endif
 
-#ifdef  CFG_ENV_IS_IN_FLASH
+#ifdef  CONFIG_ENV_IS_IN_FLASH
 	/* ENV protection ON by default */
-	flash_protect(FLAG_PROTECT_SET, CFG_ENV_ADDR,
-		      CFG_ENV_ADDR + CFG_ENV_SIZE - 1,
-		      flash_get_info(CFG_ENV_ADDR));
+	flash_protect(FLAG_PROTECT_SET, CONFIG_ENV_ADDR,
+		      CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1,
+		      flash_get_info(CONFIG_ENV_ADDR));
 #endif
 
 	flash_afterinit(i, flash_info[i].start[0], flash_info[i].size);
@@ -107,14 +107,14 @@ static flash_info_t *flash_get_info(ulong base) {
 	int i;
 	flash_info_t *info;
 
-	for (i = 0; i < CFG_MAX_FLASH_BANKS; i++) {
+	for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) {
 		info = &flash_info[i];
 		if ((info->size) && (info->start[0] <= base)
 		    && (base <= info->start[0] + info->size - 1)) {
 			break;
 		}
 	}
-	return (i == CFG_MAX_FLASH_BANKS ? 0 : info);
+	return (i == CONFIG_SYS_MAX_FLASH_BANKS ? 0 : info);
 }
 
 /*-----------------------------------------------------------------------
@@ -336,7 +336,7 @@ int flash_erase(flash_info_t * info, int s_first, int s_last) {
 		udelay(1000);
 
 		while ((*addr & (FPW) 0x00800080) != (FPW) 0x00800080) {
-			if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+			if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
 				printf("Timeout\n");
 				if (intel) {
 					/* suspend erase        */
@@ -347,14 +347,14 @@ int flash_erase(flash_info_t * info, int s_first, int s_last) {
 				break;
 			}
 			/* show that we're waiting */
-			if ((get_timer(last)) > CFG_HZ) {
+			if ((get_timer(last)) > CONFIG_SYS_HZ) {
 				/* every second */
 				putc('.');
 				last = get_timer(0);
 			}
 		}
 		/* show that we're waiting */
-		if ((get_timer(last)) > CFG_HZ) {
+		if ((get_timer(last)) > CONFIG_SYS_HZ) {
 			/* every second */
 			putc('.');
 			last = get_timer(0);
@@ -452,7 +452,7 @@ static int write_word_amd(flash_info_t * info, FPWV * dest, FPW data) {
 	/* data polling for D7 */
 	while (res == 0
 	       && (*dest & (FPW) 0x00800080) != (data & (FPW) 0x00800080)) {
-		if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+		if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
 			*dest = (FPW) 0x00F000F0;	/* reset bank */
 			res = 1;
 		}
diff --git a/board/esd/pf5200/pf5200.c b/board/esd/pf5200/pf5200.c
index 7970f8988..f7962afa5 100644
--- a/board/esd/pf5200/pf5200.c
+++ b/board/esd/pf5200/pf5200.c
@@ -32,6 +32,7 @@
 #include <mpc5xxx.h>
 #include <pci.h>
 #include <command.h>
+#include <netdev.h>
 
 #include "mt46v16m16-75.h"
 
@@ -80,7 +81,7 @@ static void sdram_start(int hi_addr)
 
 /*
  * ATTENTION: Although partially referenced initdram does NOT make real use
- *            use of CFG_SDRAM_BASE. The code does not work if CFG_SDRAM_BASE
+ *            use of CONFIG_SYS_SDRAM_BASE. The code does not work if CONFIG_SYS_SDRAM_BASE
  *            is something else than 0x00000000.
  */
 
@@ -105,9 +106,9 @@ phys_size_t initdram(int board_type)
 
 	/* find RAM size using SDRAM CS0 only */
 	sdram_start(0);
-	test1 = get_ram_size((long *) CFG_SDRAM_BASE, 0x80000000);
+	test1 = get_ram_size((long *) CONFIG_SYS_SDRAM_BASE, 0x80000000);
 	sdram_start(1);
-	test2 = get_ram_size((long *) CFG_SDRAM_BASE, 0x80000000);
+	test2 = get_ram_size((long *) CONFIG_SYS_SDRAM_BASE, 0x80000000);
 
 	if (test1 > test2) {
 		sdram_start(0);
@@ -143,9 +144,9 @@ phys_size_t initdram(int board_type)
 #if 0
 	/* find RAM size using SDRAM CS1 only */
 	sdram_start(0);
-	get_ram_size((ulong *) (CFG_SDRAM_BASE + dramsize), 0x80000000);
+	get_ram_size((ulong *) (CONFIG_SYS_SDRAM_BASE + dramsize), 0x80000000);
 	sdram_start(1);
-	get_ram_size((ulong *) (CFG_SDRAM_BASE + dramsize), 0x80000000);
+	get_ram_size((ulong *) (CONFIG_SYS_SDRAM_BASE + dramsize), 0x80000000);
 	sdram_start(0);
 #endif
 	/* set SDRAM CS1 size according to the amount of RAM found */
@@ -179,10 +180,10 @@ void flash_afterinit(ulong size)
 		/* adjust mapping */
 		*(vu_long *) MPC5XXX_BOOTCS_START =
 		    *(vu_long *) MPC5XXX_CS0_START =
-		    START_REG(CFG_BOOTCS_START | size);
+		    START_REG(CONFIG_SYS_BOOTCS_START | size);
 		*(vu_long *) MPC5XXX_BOOTCS_STOP =
 		    *(vu_long *) MPC5XXX_CS0_STOP =
-		    STOP_REG(CFG_BOOTCS_START | size, size);
+		    STOP_REG(CONFIG_SYS_BOOTCS_START | size, size);
 	}
 }
 
@@ -257,13 +258,18 @@ void init_power_switch(void)
 		*(vu_long *) MPC5XXX_SIMPLEIO_GPIO_DATA_OUTPUT |= GPIO_USB0;
 		__asm__ volatile ("sync");
 	}
-	*(vu_char *) CFG_CS1_START = 0x02;	/* Red Power LED on */
+	*(vu_char *) CONFIG_SYS_CS1_START = 0x02;	/* Red Power LED on */
 	__asm__ volatile ("sync");
 
-	*(vu_char *) (CFG_CS1_START + 1) = 0x02;	/* Disable driver for KB11 */
+	*(vu_char *) (CONFIG_SYS_CS1_START + 1) = 0x02;	/* Disable driver for KB11 */
 	__asm__ volatile ("sync");
 }
 
+int board_eth_init(bd_t *bis)
+{
+	return pci_eth_init(bis);
+}
+
 void power_set_reset(int power)
 {
 	debug("ide_set_reset(%d)\n", power);
diff --git a/board/esd/plu405/config.mk b/board/esd/plu405/config.mk
index 25b210579..0fb4efab8 100644
--- a/board/esd/plu405/config.mk
+++ b/board/esd/plu405/config.mk
@@ -25,5 +25,4 @@
 # esd PLU405 boards
 #
 
-TEXT_BASE = 0xFFFC0000
-#TEXT_BASE = 0x00FC0000
+TEXT_BASE = 0xFFFA0000
diff --git a/board/esd/plu405/flash.c b/board/esd/plu405/flash.c
index 89af1190a..274ada9fe 100644
--- a/board/esd/plu405/flash.c
+++ b/board/esd/plu405/flash.c
@@ -48,7 +48,7 @@ unsigned long flash_init (void)
 	int size_val = 0;
 
 	/* Init: no FLASHes known */
-	for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) {
+	for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
 		flash_info[i].flash_id = FLASH_UNKNOWN;
 	}
 
@@ -91,7 +91,7 @@ unsigned long flash_init (void)
 
 	/* Monitor protection ON by default */
 	(void)flash_protect(FLAG_PROTECT_SET,
-			    -CFG_MONITOR_LEN,
+			    -CONFIG_SYS_MONITOR_LEN,
 			    0xffffffff,
 			    &flash_info[0]);
 
diff --git a/board/esd/plu405/plu405.c b/board/esd/plu405/plu405.c
index fc71e9a2a..61186a8d7 100644
--- a/board/esd/plu405/plu405.c
+++ b/board/esd/plu405/plu405.c
@@ -65,11 +65,9 @@ au_image_t au_image[] = {
 
 int N_AU_IMAGES = (sizeof(au_image) / sizeof(au_image[0]));
 
-
 /* Prototypes */
 int gunzip(void *, int, unsigned char *, unsigned long *);
 
-
 int board_early_init_f (void)
 {
 	/*
@@ -89,24 +87,18 @@ int board_early_init_f (void)
 	mtdcr(uiccr, 0x00000000);       /* set all to be non-critical*/
 	mtdcr(uicpr, 0xFFFFFF99);       /* set int polarities */
 	mtdcr(uictr, 0x10000000);       /* set int trigger levels */
-	mtdcr(uicvcr, 0x00000001);      /* set vect base=0,INT0 highest priority*/
+	mtdcr(uicvcr, 0x00000001);      /* set vect base=0,INT0 highest prio */
 	mtdcr(uicsr, 0xFFFFFFFF);       /* clear all ints */
 
 	/*
-	 * EBC Configuration Register: set ready timeout to 512 ebc-clks -> ca. 15 us
+	 * EBC Configuration Register: set ready timeout to
+	 * 512 ebc-clks -> ca. 15 us
 	 */
 	mtebc (epcr, 0xa8400000); /* ebc always driven */
 
 	return 0;
 }
 
-
-int misc_init_f (void)
-{
-	return 0;  /* dummy implementation */
-}
-
-
 int misc_init_r (void)
 {
 	unsigned char *duart0_mcr = (unsigned char *)((ulong)DUART0_BA + 4);
@@ -121,8 +113,8 @@ int misc_init_r (void)
 	gd->bd->bi_flashstart = 0 - gd->bd->bi_flashsize;
 	gd->bd->bi_flashoffset = 0;
 
-	dst = malloc(CFG_FPGA_MAX_SIZE);
-	if (gunzip (dst, CFG_FPGA_MAX_SIZE, (uchar *)fpgadata, &len) != 0) {
+	dst = malloc(CONFIG_SYS_FPGA_MAX_SIZE);
+	if (gunzip (dst, CONFIG_SYS_FPGA_MAX_SIZE, (uchar *)fpgadata, &len) != 0) {
 		printf ("GUNZIP ERROR - must RESET board to recover\n");
 		do_reset (NULL, 0, 0, NULL);
 	}
@@ -132,13 +124,16 @@ int misc_init_r (void)
 		printf("\nFPGA: Booting failed ");
 		switch (status) {
 		case ERROR_FPGA_PRG_INIT_LOW:
-			printf("(Timeout: INIT not low after asserting PROGRAM*)\n ");
+			printf("(Timeout: INIT not low "
+			       "after asserting PROGRAM*)\n");
 			break;
 		case ERROR_FPGA_PRG_INIT_HIGH:
-			printf("(Timeout: INIT not high after deasserting PROGRAM*)\n ");
+			printf("(Timeout: INIT not high "
+			       "after deasserting PROGRAM*)\n");
 			break;
 		case ERROR_FPGA_PRG_DONE:
-			printf("(Timeout: DONE not high after programming FPGA)\n ");
+			printf("(Timeout: DONE not high "
+			       "after programming FPGA)\n");
 			break;
 		}
 
@@ -184,22 +179,23 @@ int misc_init_r (void)
 	/*
 	 * Reset external DUARTs
 	 */
-	out_be32((void*)GPIO0_OR, in_be32((void*)GPIO0_OR) | CFG_DUART_RST); /* set reset to high */
-	udelay(10); /* wait 10us */
-	out_be32((void*)GPIO0_OR, in_be32((void*)GPIO0_OR) & ~CFG_DUART_RST); /* set reset to low */
-	udelay(1000); /* wait 1ms */
+	out_be32((void*)GPIO0_OR, in_be32((void*)GPIO0_OR) | CONFIG_SYS_DUART_RST);
+	udelay(10);
+	out_be32((void*)GPIO0_OR, in_be32((void*)GPIO0_OR) & ~CONFIG_SYS_DUART_RST);
+	udelay(1000);
 
 	/*
 	 * Set NAND-FLASH GPIO signals to default
 	 */
-	out_be32((void*)GPIO0_OR, in_be32((void*)GPIO0_OR) & ~(CFG_NAND_CLE | CFG_NAND_ALE));
-	out_be32((void*)GPIO0_OR, in_be32((void*)GPIO0_OR) | CFG_NAND_CE);
+	out_be32((void*)GPIO0_OR,
+		 in_be32((void*)GPIO0_OR) & ~(CONFIG_SYS_NAND_CLE | CONFIG_SYS_NAND_ALE));
+	out_be32((void*)GPIO0_OR, in_be32((void*)GPIO0_OR) | CONFIG_SYS_NAND_CE);
 
 	/*
 	 * Setup EEPROM write protection
 	 */
-	out_be32((void*)GPIO0_OR, in_be32((void*)GPIO0_OR) | CFG_EEPROM_WP);
-	out_be32((void*)GPIO0_TCR, in_be32((void*)GPIO0_TCR) | CFG_EEPROM_WP);
+	out_be32((void*)GPIO0_OR, in_be32((void*)GPIO0_OR) | CONFIG_SYS_EEPROM_WP);
+	out_be32((void*)GPIO0_TCR, in_be32((void*)GPIO0_TCR) | CONFIG_SYS_EEPROM_WP);
 
 	/*
 	 * Enable interrupts in exar duart mcr[3]
@@ -210,7 +206,6 @@ int misc_init_r (void)
 	return (0);
 }
 
-
 /*
  * Check Board Identity:
  */
@@ -231,36 +226,23 @@ int checkboard (void)
 	return 0;
 }
 
-
-phys_size_t initdram (int board_type)
-{
-	unsigned long val;
-
-	mtdcr(memcfga, mem_mb0cf);
-	val = mfdcr(memcfgd);
-
-	return (4*1024*1024 << ((val & 0x000e0000) >> 17));
-}
-
-
 #ifdef CONFIG_IDE_RESET
 void ide_set_reset(int on)
 {
 	volatile unsigned short *fpga_mode =
-		(unsigned short *)((ulong)CFG_FPGA_BASE_ADDR + CFG_FPGA_CTRL);
+		(unsigned short *)((ulong)CONFIG_SYS_FPGA_BASE_ADDR + CONFIG_SYS_FPGA_CTRL);
 
 	/*
 	 * Assert or deassert CompactFlash Reset Pin
 	 */
 	if (on) {		/* assert RESET */
-		*fpga_mode &= ~(CFG_FPGA_CTRL_CF_RESET);
+		*fpga_mode &= ~(CONFIG_SYS_FPGA_CTRL_CF_RESET);
 	} else {		/* release RESET */
-		*fpga_mode |= CFG_FPGA_CTRL_CF_RESET;
+		*fpga_mode |= CONFIG_SYS_FPGA_CTRL_CF_RESET;
 	}
 }
 #endif /* CONFIG_IDE_RESET */
 
-
 void reset_phy(void)
 {
 #ifdef CONFIG_LXT971_NO_SLEEP
@@ -272,8 +254,7 @@ void reset_phy(void)
 #endif
 }
 
-
-#if defined(CFG_EEPROM_WREN)
+#if defined(CONFIG_SYS_EEPROM_WREN)
 /* Input: <dev_addr>  I2C address of EEPROM device to enable.
  *         <state>     -1: deliver current state
  *	               0: disable write
@@ -284,23 +265,26 @@ void reset_phy(void)
  */
 int eeprom_write_enable (unsigned dev_addr, int state)
 {
-	if (CFG_I2C_EEPROM_ADDR != dev_addr) {
+	if (CONFIG_SYS_I2C_EEPROM_ADDR != dev_addr) {
 		return -1;
 	} else {
 		switch (state) {
 		case 1:
 			/* Enable write access, clear bit GPIO0. */
-			out_be32((void*)GPIO0_OR, in_be32((void*)GPIO0_OR) & ~CFG_EEPROM_WP);
+			out_be32((void*)GPIO0_OR,
+				 in_be32((void*)GPIO0_OR) & ~CONFIG_SYS_EEPROM_WP);
 			state = 0;
 			break;
 		case 0:
 			/* Disable write access, set bit GPIO0. */
-			out_be32((void*)GPIO0_OR, in_be32((void*)GPIO0_OR) | CFG_EEPROM_WP);
+			out_be32((void*)GPIO0_OR,
+				 in_be32((void*)GPIO0_OR) | CONFIG_SYS_EEPROM_WP);
 			state = 0;
 			break;
 		default:
 			/* Read current status back. */
-			state = (0 == (in_be32((void*)GPIO0_OR) & CFG_EEPROM_WP));
+			state = (0 == (in_be32((void*)GPIO0_OR) &
+				       CONFIG_SYS_EEPROM_WP));
 			break;
 		}
 	}
@@ -314,21 +298,21 @@ int do_eep_wren (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 
 	if (query) {
 		/* Query write access state. */
-		state = eeprom_write_enable (CFG_I2C_EEPROM_ADDR, -1);
+		state = eeprom_write_enable (CONFIG_SYS_I2C_EEPROM_ADDR, -1);
 		if (state < 0) {
 			puts ("Query of write access state failed.\n");
 		} else {
 			printf ("Write access for device 0x%0x is %sabled.\n",
-				CFG_I2C_EEPROM_ADDR, state ? "en" : "dis");
+				CONFIG_SYS_I2C_EEPROM_ADDR, state ? "en" : "dis");
 			state = 0;
 		}
 	} else {
 		if ('0' == argv[1][0]) {
 			/* Disable write access. */
-			state = eeprom_write_enable (CFG_I2C_EEPROM_ADDR, 0);
+			state = eeprom_write_enable (CONFIG_SYS_I2C_EEPROM_ADDR, 0);
 		} else {
 			/* Enable write access. */
-			state = eeprom_write_enable (CFG_I2C_EEPROM_ADDR, 1);
+			state = eeprom_write_enable (CONFIG_SYS_I2C_EEPROM_ADDR, 1);
 		}
 		if (state < 0) {
 			puts ("Setup of write access state failed.\n");
@@ -341,4 +325,4 @@ int do_eep_wren (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 U_BOOT_CMD(eepwren,	2,	0,	do_eep_wren,
 	   "eepwren - Enable / disable / query EEPROM write access\n",
 	   NULL);
-#endif /* #if defined(CFG_EEPROM_WREN) */
+#endif /* #if defined(CONFIG_SYS_EEPROM_WREN) */
diff --git a/board/esd/plu405/u-boot.lds b/board/esd/plu405/u-boot.lds
index d70d37934..fd5f3dfd1 100644
--- a/board/esd/plu405/u-boot.lds
+++ b/board/esd/plu405/u-boot.lds
@@ -61,19 +61,6 @@ SECTIONS
     /* the sector layout of our flash chips!	XXX FIXME XXX	*/
 
     cpu/ppc4xx/start.o	(.text)
-    cpu/ppc4xx/traps.o	(.text)
-    cpu/ppc4xx/interrupts.o	(.text)
-    cpu/ppc4xx/4xx_uart.o	(.text)
-    cpu/ppc4xx/cpu_init.o	(.text)
-    cpu/ppc4xx/speed.o	(.text)
-    cpu/ppc4xx/4xx_enet.o	(.text)
-    common/dlmalloc.o	(.text)
-    lib_generic/crc32.o		(.text)
-    lib_ppc/extable.o	(.text)
-    lib_generic/zlib.o		(.text)
-
-/*    . = env_offset;*/
-/*    common/environment.o(.text)*/
 
     *(.text)
     *(.fixup)
@@ -124,7 +111,6 @@ SECTIONS
   .u_boot_cmd : { *(.u_boot_cmd) }
   __u_boot_cmd_end = .;
 
-
   . = .;
   __start___ex_table = .;
   __ex_table : { *(__ex_table) }
@@ -144,6 +130,7 @@ SECTIONS
    *(.dynbss)
    *(.bss)
    *(COMMON)
+   . = ALIGN(4);
   }
   _end = . ;
   PROVIDE (end = .);
diff --git a/board/esd/pmc405/pmc405.c b/board/esd/pmc405/pmc405.c
index 326d56035..c0781dc95 100644
--- a/board/esd/pmc405/pmc405.c
+++ b/board/esd/pmc405/pmc405.c
@@ -72,23 +72,23 @@ int board_early_init_f (void)
 	 * Setup GPIO pins
 	 */
 
-	mtdcr(cntrl0, mfdcr(cntrl0) | ((CFG_FPGA_INIT | \
-					CFG_FPGA_DONE | \
-					CFG_XEREADY | \
-					CFG_NONMONARCH | \
-					CFG_REV1_2) << 5));
+	mtdcr(cntrl0, mfdcr(cntrl0) | ((CONFIG_SYS_FPGA_INIT | \
+					CONFIG_SYS_FPGA_DONE | \
+					CONFIG_SYS_XEREADY | \
+					CONFIG_SYS_NONMONARCH | \
+					CONFIG_SYS_REV1_2) << 5));
 
-	if (!(in32(GPIO0_IR) & CFG_REV1_2)) {
+	if (!(in32(GPIO0_IR) & CONFIG_SYS_REV1_2)) {
 		/* rev 1.2 boards */
-		mtdcr(cntrl0, mfdcr(cntrl0) | ((CFG_INTA_FAKE | \
-						CFG_SELF_RST) << 5));
+		mtdcr(cntrl0, mfdcr(cntrl0) | ((CONFIG_SYS_INTA_FAKE | \
+						CONFIG_SYS_SELF_RST) << 5));
 	}
 
 	out32(GPIO0_OR, 0);
-	out32(GPIO0_TCR, CFG_FPGA_PRG | CFG_FPGA_CLK | CFG_FPGA_DATA | CFG_XEREADY); /* setup for output */
+	out32(GPIO0_TCR, CONFIG_SYS_FPGA_PRG | CONFIG_SYS_FPGA_CLK | CONFIG_SYS_FPGA_DATA | CONFIG_SYS_XEREADY); /* setup for output */
 
 	/* - check if rev1_2 is low, then:
-	 * - set/reset CFG_INTA_FAKE/CFG_SELF_RST in TCR to assert INTA# or SELFRST#
+	 * - set/reset CONFIG_SYS_INTA_FAKE/CONFIG_SYS_SELF_RST in TCR to assert INTA# or SELFRST#
 	 */
 
 	return 0;
@@ -104,7 +104,7 @@ int misc_init_r (void)
 	gd->bd->bi_flashstart = 0 - gd->bd->bi_flashsize;
 	gd->bd->bi_flashoffset = 0;
 
-	out32(GPIO0_OR, in32(GPIO0_OR) | CFG_XEREADY); /* deassert EREADY# */
+	out32(GPIO0_OR, in32(GPIO0_OR) | CONFIG_SYS_XEREADY); /* deassert EREADY# */
 	return (0);
 }
 
@@ -112,13 +112,13 @@ ushort pmc405_pci_subsys_deviceid(void)
 {
 	ulong val;
 	val = in32(GPIO0_IR);
-	if (!(val & CFG_REV1_2)) { /* low=rev1.2 */
-		if (val & CFG_NONMONARCH) { /* monarch# signal */
-			return CFG_PCI_SUBSYS_DEVICEID_NONMONARCH;
+	if (!(val & CONFIG_SYS_REV1_2)) { /* low=rev1.2 */
+		if (val & CONFIG_SYS_NONMONARCH) { /* monarch# signal */
+			return CONFIG_SYS_PCI_SUBSYS_DEVICEID_NONMONARCH;
 		}
-		return CFG_PCI_SUBSYS_DEVICEID_MONARCH;
+		return CONFIG_SYS_PCI_SUBSYS_DEVICEID_MONARCH;
 	}
-	return CFG_PCI_SUBSYS_DEVICEID_NONMONARCH;
+	return CONFIG_SYS_PCI_SUBSYS_DEVICEID_NONMONARCH;
 }
 
 /*
@@ -140,9 +140,9 @@ int checkboard (void)
 	}
 
 	val = in32(GPIO0_IR);
-	if (!(val & CFG_REV1_2)) { /* low=rev1.2 */
+	if (!(val & CONFIG_SYS_REV1_2)) { /* low=rev1.2 */
 		puts(" rev1.2 (");
-		if (val & CFG_NONMONARCH) { /* monarch# signal */
+		if (val & CONFIG_SYS_NONMONARCH) { /* monarch# signal */
 			puts("non-");
 		}
 		puts("monarch)");
@@ -156,24 +156,6 @@ int checkboard (void)
 }
 
 /* ------------------------------------------------------------------------- */
-
-phys_size_t initdram (int board_type)
-{
-	unsigned long val;
-
-	mtdcr(memcfga, mem_mb0cf);
-	val = mfdcr(memcfgd);
-
-#if 0
-	printf("\nmb0cf=%x\n", val); /* test-only */
-	printf("strap=%x\n", mfdcr(strap)); /* test-only */
-#endif
-
-	return (4*1024*1024 << ((val & 0x000e0000) >> 17));
-}
-
-
-/* ------------------------------------------------------------------------- */
 void reset_phy(void)
 {
 #ifdef CONFIG_LXT971_NO_SLEEP
diff --git a/board/esd/pmc405/u-boot.lds b/board/esd/pmc405/u-boot.lds
index 81ee614f6..ca615f509 100644
--- a/board/esd/pmc405/u-boot.lds
+++ b/board/esd/pmc405/u-boot.lds
@@ -72,7 +72,7 @@ SECTIONS
     lib_generic/zlib.o		(.text)
 
 /*    . = env_offset;*/
-/*    common/environment.o(.text)*/
+/*    common/env_embedded.o(.text)*/
 
     *(.text)
     *(.fixup)
@@ -142,6 +142,7 @@ SECTIONS
    *(.dynbss)
    *(.bss)
    *(COMMON)
+   . = ALIGN(4);
   }
   _end = . ;
   PROVIDE (end = .);
diff --git a/board/esd/pmc440/cmd_pmc440.c b/board/esd/pmc440/cmd_pmc440.c
index ca5c177e3..16c9c7eea 100644
--- a/board/esd/pmc440/cmd_pmc440.c
+++ b/board/esd/pmc440/cmd_pmc440.c
@@ -26,6 +26,9 @@
 #include <asm/io.h>
 #include <asm/cache.h>
 #include <asm/processor.h>
+#if defined(CONFIG_LOGBUFFER)
+#include <logbuff.h>
+#endif
 
 #include "pmc440.h"
 
@@ -323,7 +326,7 @@ int do_setup_bootstrap_eeprom(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]
 	}
 
 	printf("Writing boot EEPROM ...\n");
-	if (bootstrap_eeprom_write(CFG_I2C_BOOT_EEPROM_ADDR,
+	if (bootstrap_eeprom_write(CONFIG_SYS_I2C_BOOT_EEPROM_ADDR,
 				   0, (uchar*)sdsdp, count) != 0)
 		printf("bootstrap_eeprom_write failed\n");
 	else
@@ -343,14 +346,11 @@ extern env_t *env_ptr;
 
 int do_painit(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 {
-	u32 memsize;
-	u32 pram, env_base;
+	u32 pram, nextbase, base;
 	char *v;
 	u32 param;
 	ulong *lptr;
 
-	memsize = gd->bd->bi_memsize;
-
 	v = getenv("pram");
 	if (v)
 		pram = simple_strtoul(v, NULL, 10);
@@ -359,21 +359,42 @@ int do_painit(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 		return 1;
 	}
 
-	param = memsize - (pram << 10);
+	base = gd->bd->bi_memsize;
+#if defined(CONFIG_LOGBUFFER)
+	base -= LOGBUFF_LEN + LOGBUFF_OVERHEAD;
+#endif
+	/*
+	 * gd->bd->bi_memsize == physical ram size - CONFIG_SYS_MEM_TOP_HIDE
+	 */
+	param = base - (pram << 10);
 	printf("PARAM: @%08x\n", param);
+	debug("memsize=0x%08x, base=0x%08x\n", gd->bd->bi_memsize, base);
 
+	/* clear entire PA ram */
 	memset((void*)param, 0, (pram << 10));
-	env_base = memsize - 4096 - ((CFG_ENV_SIZE + 4096) & ~(4096-1));
-	memcpy((void*)env_base, env_ptr, CFG_ENV_SIZE);
 
-	lptr = (ulong*)memsize;
-	*(--lptr) = CFG_ENV_SIZE;
-	*(--lptr) = memsize - env_base;
-	*(--lptr) = crc32(0, (void*)(memsize - 0x08), 0x08);
-	*(--lptr) = 0;
+	/* reserve 4k for pointer field */
+	nextbase = base - 4096;
+	lptr = (ulong*)(base);
+
+	/*
+	 * *(--lptr) = item_size;
+	 * *(--lptr) = base - item_base = distance from field top;
+	 */
+
+	/* env is first (4k aligned) */
+	nextbase -= ((CONFIG_ENV_SIZE + 4096 - 1) & ~(4096 - 1));
+	memcpy((void*)nextbase, env_ptr, CONFIG_ENV_SIZE);
+	*(--lptr) = CONFIG_ENV_SIZE;     /* size */
+	*(--lptr) = base - nextbase;  /* offset | type=0 */
+
+	/* free section */
+	*(--lptr) = nextbase - param; /* size */
+	*(--lptr) = (base - param) | 126; /* offset | type=126 */
 
-	/* make sure data can be accessed through PCI */
-	flush_dcache_range(param, param + (pram << 10) - 1);
+	/* terminate pointer field */
+	*(--lptr) = crc32(0, (void*)(base - 0x10), 0x10);
+	*(--lptr) = 0;                /* offset=0 -> terminator */
 	return 0;
 }
 U_BOOT_CMD(
@@ -385,28 +406,11 @@ U_BOOT_CMD(
 
 int do_selfreset(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 {
-	if (argc > 1) {
-		if (argv[1][0] == '0') {
-			/* assert */
-			printf("self-reset# asserted\n");
-			out_be32((void*)GPIO0_TCR,
-				 in_be32((void*)GPIO0_TCR) | GPIO0_SELF_RST);
-		} else {
-			/* deassert */
-			printf("self-reset# deasserted\n");
-			out_be32((void*)GPIO0_TCR,
-				 in_be32((void*)GPIO0_TCR) & ~GPIO0_SELF_RST);
-		}
-	} else {
-		printf("self-reset# is %s\n",
-		       in_be32((void*)GPIO0_TCR) & GPIO0_SELF_RST ?
-		       "active" : "inactive");
-	}
-
+	in_be32((void*)CONFIG_SYS_RESET_BASE);
 	return 0;
 }
 U_BOOT_CMD(
-	selfreset,	2,	1,	do_selfreset,
+	selfreset,	1,	1,	do_selfreset,
 	"selfreset- assert self-reset# signal\n",
 	NULL
 	);
@@ -513,7 +517,7 @@ U_BOOT_CMD(
 	"<pciaddr> (pciaddr will be aligned to 256MB)\n"
 	);
 
-#if defined(CFG_EEPROM_WREN)
+#if defined(CONFIG_SYS_EEPROM_WREN)
 int do_eep_wren(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 {
 	int query = argc == 1;
@@ -521,21 +525,21 @@ int do_eep_wren(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 
 	if (query) {
 		/* Query write access state. */
-		state = eeprom_write_enable(CFG_I2C_EEPROM_ADDR, -1);
+		state = eeprom_write_enable(CONFIG_SYS_I2C_EEPROM_ADDR, -1);
 		if (state < 0) {
 			puts("Query of write access state failed.\n");
 		} else {
 			printf("Write access for device 0x%0x is %sabled.\n",
-			       CFG_I2C_EEPROM_ADDR, state ? "en" : "dis");
+			       CONFIG_SYS_I2C_EEPROM_ADDR, state ? "en" : "dis");
 			state = 0;
 		}
 	} else {
 		if ('0' == argv[1][0]) {
 			/* Disable write access. */
-			state = eeprom_write_enable(CFG_I2C_EEPROM_ADDR, 0);
+			state = eeprom_write_enable(CONFIG_SYS_I2C_EEPROM_ADDR, 0);
 		} else {
 			/* Enable write access. */
-			state = eeprom_write_enable(CFG_I2C_EEPROM_ADDR, 1);
+			state = eeprom_write_enable(CONFIG_SYS_I2C_EEPROM_ADDR, 1);
 		}
 		if (state < 0) {
 			puts("Setup of write access state failed.\n");
@@ -547,6 +551,6 @@ int do_eep_wren(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 U_BOOT_CMD(eepwren, 2, 0, do_eep_wren,
 	   "eepwren - Enable / disable / query EEPROM write access\n",
 	   NULL);
-#endif /* #if defined(CFG_EEPROM_WREN) */
+#endif /* #if defined(CONFIG_SYS_EEPROM_WREN) */
 
 #endif /* CONFIG_CMD_BSP */
diff --git a/board/esd/pmc440/config.mk b/board/esd/pmc440/config.mk
index e62b8d30e..0c4d58282 100644
--- a/board/esd/pmc440/config.mk
+++ b/board/esd/pmc440/config.mk
@@ -37,5 +37,5 @@ PLATFORM_CPPFLAGS += -DDEBUG
 endif
 
 ifeq ($(dbcr),1)
-PLATFORM_CPPFLAGS += -DCFG_INIT_DBCR=0x8cff0000
+PLATFORM_CPPFLAGS += -DCONFIG_SYS_INIT_DBCR=0x8cff0000
 endif
diff --git a/board/esd/pmc440/fpga.c b/board/esd/pmc440/fpga.c
index a35f42bd5..a2eda32ac 100644
--- a/board/esd/pmc440/fpga.c
+++ b/board/esd/pmc440/fpga.c
@@ -220,8 +220,9 @@ int fpga_post_config_fn(int cookie)
 
 	FPGA_OUT32(&fpga->status, (gd->board_type << STATUS_HWREV_SHIFT) & STATUS_HWREV_MASK);
 
-	/* NGCC only: enable ledlink */
-	if ((s = getenv("bd_type")) && !strcmp(s, "ngcc"))
+	/* NGCC/CANDES only: enable ledlink */
+	if ((s = getenv("bd_type")) &&
+	    ((!strcmp(s, "ngcc")) || (!strcmp(s, "candes"))))
 		FPGA_SETBITS(&fpga->ctrla, 0x29f8c000);
 
 	return rc;
diff --git a/board/esd/pmc440/init.S b/board/esd/pmc440/init.S
index 148af71bb..26a8282ce 100644
--- a/board/esd/pmc440/init.S
+++ b/board/esd/pmc440/init.S
@@ -44,28 +44,28 @@ tlbtab:
 	 * speed up boot process. It is patched after relocation to enable SA_I
 	 */
 #ifndef CONFIG_NAND_SPL
-	tlbentry( CFG_BOOT_BASE_ADDR, SZ_256M, CFG_BOOT_BASE_ADDR, 1, AC_R|AC_W|AC_X|SA_G )
+	tlbentry( CONFIG_SYS_BOOT_BASE_ADDR, SZ_256M, CONFIG_SYS_BOOT_BASE_ADDR, 1, AC_R|AC_W|AC_X|SA_G )
 #else
-	tlbentry( CFG_NAND_BOOT_SPL_SRC, SZ_4K, CFG_NAND_BOOT_SPL_SRC, 1, AC_R|AC_W|AC_X|SA_G )
+	tlbentry( CONFIG_SYS_NAND_BOOT_SPL_SRC, SZ_4K, CONFIG_SYS_NAND_BOOT_SPL_SRC, 1, AC_R|AC_W|AC_X|SA_G )
 #endif
 
 	/* TLB-entry for DDR SDRAM (Up to 2GB) */
 #ifdef CONFIG_4xx_DCACHE
-	tlbentry( CFG_SDRAM_BASE, SZ_256M, CFG_SDRAM_BASE, 0, AC_R|AC_W|AC_X|SA_G)
+	tlbentry( CONFIG_SYS_SDRAM_BASE, SZ_256M, CONFIG_SYS_SDRAM_BASE, 0, AC_R|AC_W|AC_X|SA_G)
 #else
-	tlbentry( CFG_SDRAM_BASE, SZ_256M, CFG_SDRAM_BASE, 0, AC_R|AC_W|AC_X|SA_G|SA_I )
+	tlbentry( CONFIG_SYS_SDRAM_BASE, SZ_256M, CONFIG_SYS_SDRAM_BASE, 0, AC_R|AC_W|AC_X|SA_G|SA_I )
 #endif
 
-#ifdef CFG_INIT_RAM_DCACHE
+#ifdef CONFIG_SYS_INIT_RAM_DCACHE
 	/* TLB-entry for init-ram in dcache (SA_I must be turned off!) */
-	tlbentry( CFG_INIT_RAM_ADDR, SZ_64K, CFG_INIT_RAM_ADDR, 0, AC_R|AC_W|AC_X|SA_G )
+	tlbentry( CONFIG_SYS_INIT_RAM_ADDR, SZ_64K, CONFIG_SYS_INIT_RAM_ADDR, 0, AC_R|AC_W|AC_X|SA_G )
 #endif
 
 	/* TLB-entry for PCI Memory */
-	tlbentry( CFG_PCI_MEMBASE, SZ_256M, CFG_PCI_MEMBASE, 1, AC_R|AC_W|SA_G|SA_I )
-	tlbentry( CFG_PCI_MEMBASE1, SZ_256M, CFG_PCI_MEMBASE1, 1, AC_R|AC_W|SA_G|SA_I )
-	tlbentry( CFG_PCI_MEMBASE2, SZ_256M, CFG_PCI_MEMBASE2, 1, AC_R|AC_W|SA_G|SA_I )
-	tlbentry( CFG_PCI_MEMBASE3, SZ_256M, CFG_PCI_MEMBASE3, 1, AC_R|AC_W|SA_G|SA_I )
+	tlbentry( CONFIG_SYS_PCI_MEMBASE, SZ_256M, CONFIG_SYS_PCI_MEMBASE, 1, AC_R|AC_W|SA_G|SA_I )
+	tlbentry( CONFIG_SYS_PCI_MEMBASE1, SZ_256M, CONFIG_SYS_PCI_MEMBASE1, 1, AC_R|AC_W|SA_G|SA_I )
+	tlbentry( CONFIG_SYS_PCI_MEMBASE2, SZ_256M, CONFIG_SYS_PCI_MEMBASE2, 1, AC_R|AC_W|SA_G|SA_I )
+	tlbentry( CONFIG_SYS_PCI_MEMBASE3, SZ_256M, CONFIG_SYS_PCI_MEMBASE3, 1, AC_R|AC_W|SA_G|SA_I )
 
 	/* TLB-entries for EBC */
 	/* PMC440 maps EBC to 0xef000000 which is handled by the peripheral
@@ -76,7 +76,7 @@ tlbtab:
 	tlbentry( 0xc0000000, SZ_256M, 0xc0000000, 1, AC_R|AC_W|AC_X|SA_G|SA_I )
 
 	/* TLB-entry for NAND */
-	tlbentry( CFG_NAND_ADDR, SZ_1K, CFG_NAND_ADDR, 1, AC_R|AC_W|AC_X|SA_G|SA_I )
+	tlbentry( CONFIG_SYS_NAND_ADDR, SZ_1K, CONFIG_SYS_NAND_ADDR, 1, AC_R|AC_W|AC_X|SA_G|SA_I )
 
 	/* TLB-entry for Internal Registers & OCM */
 	tlbentry( 0xe0000000, SZ_16M, 0xe0000000, 0,  AC_R|AC_W|AC_X|SA_I )
@@ -98,8 +98,8 @@ tlbtab:
 	 * For NAND booting the first TLB has to be reconfigured to full size
 	 * and with caching disabled after running from RAM!
 	 */
-#define TLB00	TLB0(CFG_BOOT_BASE_ADDR, SZ_256M)
-#define TLB01	TLB1(CFG_BOOT_BASE_ADDR, 1)
+#define TLB00	TLB0(CONFIG_SYS_BOOT_BASE_ADDR, SZ_256M)
+#define TLB01	TLB1(CONFIG_SYS_BOOT_BASE_ADDR, 1)
 #define TLB02	TLB2(AC_R|AC_W|AC_X|SA_G|SA_I)
 
 	.globl	reconfig_tlb0
diff --git a/board/esd/pmc440/pmc440.c b/board/esd/pmc440/pmc440.c
index 0cdaee445..382410534 100644
--- a/board/esd/pmc440/pmc440.c
+++ b/board/esd/pmc440/pmc440.c
@@ -1,5 +1,5 @@
 /*
- * (C) Copyright 2007-2008
+ * (Cg) Copyright 2007-2008
  * Matthias Fuchs, esd gmbh, matthias.fuchs@esd-electronics.com.
  * Based on board/amcc/sequoia/sequoia.c
  *
@@ -44,10 +44,12 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
-extern flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
+extern flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */
+extern void __ft_board_setup(void *blob, bd_t *bd);
 
 ulong flash_get_size(ulong base, int banknum);
 int pci_is_66mhz(void);
+int is_monarch(void);
 int bootstrap_eeprom_read(unsigned dev_addr, unsigned offset,
 			  uchar *buffer, unsigned cnt);
 
@@ -71,7 +73,7 @@ struct serial_device *default_serial_console(void)
 		/* mark scratchreg valid */
 		scratchreg = (scratchreg & 0xffffff00) | 0x80;
 
-		i = bootstrap_eeprom_read(CFG_I2C_BOOT_EEPROM_ADDR,
+		i = bootstrap_eeprom_read(CONFIG_SYS_I2C_BOOT_EEPROM_ADDR,
 					  0x10, buf, 4);
 		if ((i != -1) && (buf[0] == 0x19) && (buf[1] == 0x75)) {
 			scratchreg |= buf[2];
@@ -103,13 +105,13 @@ int board_early_init_f(void)
 
 	/*
 	 * Setup the GPIO pins
-	 * TODO: setup GPIOs via CFG_4xx_GPIO_TABLE in board's config file
+	 * TODO: setup GPIOs via CONFIG_SYS_4xx_GPIO_TABLE in board's config file
 	 */
-	out32(GPIO0_OR,    0x40000002);
+	out32(GPIO0_OR,    0x40000102);
 	out32(GPIO0_TCR,   0x4c90011f);
-	out32(GPIO0_OSRL,  0x28011400);
+	out32(GPIO0_OSRL,  0x28051400);
 	out32(GPIO0_OSRH,  0x55005000);
-	out32(GPIO0_TSRL,  0x08011400);
+	out32(GPIO0_TSRL,  0x08051400);
 	out32(GPIO0_TSRH,  0x55005000);
 	out32(GPIO0_ISR1L, 0x54000000);
 	out32(GPIO0_ISR1H, 0x00000000);
@@ -190,12 +192,29 @@ int board_early_init_f(void)
 		SDR0_CUST0_NDFC_ENABLE		|
 		SDR0_CUST0_NDFC_BW_8_BIT	|
 		SDR0_CUST0_NDFC_ARE_MASK	|
-		(0x80000000 >> (28 + CFG_NAND_CS));
+		(0x80000000 >> (28 + CONFIG_SYS_NAND_CS));
 	mtsdr(SDR0_CUST0, sdr0_cust0);
 
 	return 0;
 }
 
+#if defined(CONFIG_MISC_INIT_F)
+int misc_init_f(void)
+{
+	struct pci_controller hose;
+	hose.first_busno = 0;
+	hose.last_busno = 0;
+	hose.region_count = 0;
+
+	if (getenv("pciearly") && (!is_monarch())) {
+		printf("PCI:   early target init\n");
+		pci_setup_indirect(&hose, PCIX0_CFGADR, PCIX0_CFGDATA);
+		pci_target_init(&hose);
+	}
+	return 0;
+}
+#endif
+
 /*
  * misc_init_r.
  */
@@ -207,6 +226,7 @@ int misc_init_r(void)
 	unsigned long usb2d0cr = 0;
 	unsigned long usb2phy0cr, usb2h0cr = 0;
 	unsigned long sdr0_pfc1;
+	unsigned long sdr0_srst0, sdr0_srst1;
 	char *act = getenv("usbact");
 
 	/*
@@ -239,24 +259,24 @@ int misc_init_r(void)
 	 */
 	flash_get_size(gd->bd->bi_flashstart, 0);
 
-#ifdef CFG_ENV_IS_IN_FLASH
+#ifdef CONFIG_ENV_IS_IN_FLASH
 	/* Monitor protection ON by default */
 	(void)flash_protect(FLAG_PROTECT_SET,
-			    -CFG_MONITOR_LEN,
+			    -CONFIG_SYS_MONITOR_LEN,
 			    0xffffffff,
 			    &flash_info[0]);
 
 	/* Env protection ON by default */
 	(void)flash_protect(FLAG_PROTECT_SET,
-			    CFG_ENV_ADDR_REDUND,
-			    CFG_ENV_ADDR_REDUND + 2*CFG_ENV_SECT_SIZE - 1,
+			    CONFIG_ENV_ADDR_REDUND,
+			    CONFIG_ENV_ADDR_REDUND + 2*CONFIG_ENV_SECT_SIZE - 1,
 			    &flash_info[0]);
 #endif
 
 	/*
 	 * USB suff...
 	 */
-	if ((act == NULL || strcmp(act, "hostdev") == 0) &&
+	if ((act == NULL || strcmp(act, "host") == 0) &&
 	    !(in_be32((void*)GPIO0_IR) & GPIO0_USB_PRSNT)){
 		/* SDR Setting */
 		mfsdr(SDR0_PFC1, sdr0_pfc1);
@@ -290,12 +310,46 @@ int misc_init_r(void)
 		mtsdr(SDR0_USB2PHY0CR, usb2phy0cr);
 		mtsdr(SDR0_USB2H0CR, usb2h0cr);
 
-		/* clear resets */
+		/*
+		 * Take USB out of reset:
+		 * -Initial status = all cores are in reset
+		 * -deassert reset to OPB1, P4OPB0, OPB2, PLB42OPB1 OPB2PLB40 cores
+		 * -wait 1 ms
+		 * -deassert reset to PHY
+		 * -wait 1 ms
+		 * -deassert  reset to HOST
+		 * -wait 4 ms
+		 * -deassert all other resets
+		 */
+		mfsdr(SDR0_SRST1, sdr0_srst1);
+		sdr0_srst1 &= ~(SDR0_SRST1_OPBA1 |	\
+				SDR0_SRST1_P4OPB0 |	\
+				SDR0_SRST1_OPBA2 |	\
+				SDR0_SRST1_PLB42OPB1 |	\
+				SDR0_SRST1_OPB2PLB40);
+		mtsdr(SDR0_SRST1, sdr0_srst1);
+		udelay(1000);
+
+		mfsdr(SDR0_SRST1, sdr0_srst1);
+		sdr0_srst1 &= ~SDR0_SRST1_USB20PHY;
+		mtsdr(SDR0_SRST1, sdr0_srst1);
 		udelay(1000);
+
+		mfsdr(SDR0_SRST0, sdr0_srst0);
+		sdr0_srst0 &= ~SDR0_SRST0_USB2H;
+		mtsdr(SDR0_SRST0, sdr0_srst0);
+		udelay(4000);
+
+		/* finally all the other resets */
 		mtsdr(SDR0_SRST1, 0x00000000);
-		udelay(1000);
 		mtsdr(SDR0_SRST0, 0x00000000);
 
+		if (!(in_be32((void*)GPIO0_IR) & GPIO0_USB_PRSNT)) {
+			/* enable power on USB socket */
+			out_be32((void*)GPIO1_OR,
+				 in_be32((void*)GPIO1_OR) & ~GPIO1_USB_PWR_N);
+		}
+
 		printf("USB:   Host\n");
 
 	} else if ((strcmp(act, "dev") == 0) ||
@@ -498,7 +552,7 @@ int pci_pre_init(struct pci_controller *hose)
  * inbound map (PIM). But the bootstrap config choices are limited and
  * may not be sufficient for a given board.
  */
-#if defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT)
+#if defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT)
 void pci_target_init(struct pci_controller *hose)
 {
 	char *ptmla_str, *ptmms_str;
@@ -516,8 +570,8 @@ void pci_target_init(struct pci_controller *hose)
 	 */
 	out32r(PCIX0_PMM0MA, 0x00000000);	/* PMM0 Mask/Attribute */
 						/* - disabled b4 setting */
-	out32r(PCIX0_PMM0LA, CFG_PCI_MEMBASE);	/* PMM0 Local Address */
-	out32r(PCIX0_PMM0PCILA, CFG_PCI_MEMBASE); /* PMM0 PCI Low Address */
+	out32r(PCIX0_PMM0LA, CONFIG_SYS_PCI_MEMBASE);	/* PMM0 Local Address */
+	out32r(PCIX0_PMM0PCILA, CONFIG_SYS_PCI_MEMBASE); /* PMM0 PCI Low Address */
 	out32r(PCIX0_PMM0PCIHA, 0x00000000);	/* PMM0 PCI High Address */
 	out32r(PCIX0_PMM0MA, 0xc0000001);	/* 1G + No prefetching, */
 						/* and enable region */
@@ -547,14 +601,14 @@ void pci_target_init(struct pci_controller *hose)
 		out32r(PCIX0_PTM2MS, simple_strtoul(ptmms_str, NULL, 16));
 		out32r(PCIX0_PTM2LA, simple_strtoul(ptmla_str, NULL, 16));
 	} else {
-		/* BAR2: default: 16 MB FPGA + registers */
-		out32r(PCIX0_PTM2MS, 0xff000001); /* Memory Size/Attribute */
+		/* BAR2: default: 4MB FPGA */
+		out32r(PCIX0_PTM2MS, 0xffc00001); /* Memory Size/Attribute */
 		out32r(PCIX0_PTM2LA, 0xef000000); /* Local Addr. Reg */
 	}
 
 	if (is_monarch()) {
 		/* BAR2: map FPGA registers behind system memory at 1GB */
-		pci_write_config_dword(0, PCI_BASE_ADDRESS_2, 0x40000008);
+		pci_hose_write_config_dword(hose, 0, PCI_BASE_ADDRESS_2, 0x40000008);
 	}
 
 	/*
@@ -562,8 +616,8 @@ void pci_target_init(struct pci_controller *hose)
 	 */
 
 	/* Program the board's vendor id */
-	pci_write_config_word(0, PCI_SUBSYSTEM_VENDOR_ID,
-			      CFG_PCI_SUBSYS_VENDORID);
+	pci_hose_write_config_word(hose, 0, PCI_SUBSYSTEM_VENDOR_ID,
+				   CONFIG_SYS_PCI_SUBSYS_VENDORID);
 
 	/* disabled for PMC405 backward compatibility */
 	/* Configure command register as bus master */
@@ -571,19 +625,19 @@ void pci_target_init(struct pci_controller *hose)
 
 
 	/* 240nS PCI clock */
-	pci_write_config_word(0, PCI_LATENCY_TIMER, 1);
+	pci_hose_write_config_word(hose, 0, PCI_LATENCY_TIMER, 1);
 
 	/* No error reporting */
-	pci_write_config_word(0, PCI_ERREN, 0);
+	pci_hose_write_config_word(hose, 0, PCI_ERREN, 0);
 
 	pci_write_config_dword(0, PCI_BRDGOPT2, 0x00000101);
 
 	if (!is_monarch()) {
 		/* Program the board's subsystem id/classcode */
-		pci_write_config_word(0, PCI_SUBSYSTEM_ID,
-				      CFG_PCI_SUBSYS_ID_NONMONARCH);
-		pci_write_config_word(0, PCI_CLASS_SUB_CODE,
-				      CFG_PCI_CLASSCODE_NONMONARCH);
+		pci_hose_write_config_word(hose, 0, PCI_SUBSYSTEM_ID,
+					   CONFIG_SYS_PCI_SUBSYS_ID_NONMONARCH);
+		pci_hose_write_config_word(hose, 0, PCI_CLASS_SUB_CODE,
+					   CONFIG_SYS_PCI_CLASSCODE_NONMONARCH);
 
 		/* PCI configuration done: release ERREADY */
 		out_be32((void*)GPIO1_OR,
@@ -592,18 +646,21 @@ void pci_target_init(struct pci_controller *hose)
 			 in_be32((void*)GPIO1_TCR) | GPIO1_PPC_EREADY);
 	} else {
 		/* Program the board's subsystem id/classcode */
-		pci_write_config_word(0, PCI_SUBSYSTEM_ID,
-				      CFG_PCI_SUBSYS_ID_MONARCH);
-		pci_write_config_word(0, PCI_CLASS_SUB_CODE,
-				      CFG_PCI_CLASSCODE_MONARCH);
+		pci_hose_write_config_word(hose, 0, PCI_SUBSYSTEM_ID,
+					   CONFIG_SYS_PCI_SUBSYS_ID_MONARCH);
+		pci_hose_write_config_word(hose, 0, PCI_CLASS_SUB_CODE,
+					   CONFIG_SYS_PCI_CLASSCODE_MONARCH);
 	}
+
+	/* enable host configuration */
+	pci_hose_write_config_dword(hose, 0, PCI_BRDGOPT2, 0x00000101);
 }
-#endif /* defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT) */
+#endif /* defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT) */
 
 /*
  * pci_master_init
  */
-#if defined(CONFIG_PCI) && defined(CFG_PCI_MASTER_INIT)
+#if defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_MASTER_INIT)
 void pci_master_init(struct pci_controller *hose)
 {
 	unsigned short temp_short;
@@ -620,12 +677,18 @@ void pci_master_init(struct pci_controller *hose)
 				      PCI_COMMAND_MEMORY);
 	}
 }
-#endif /* defined(CONFIG_PCI) && defined(CFG_PCI_MASTER_INIT) */
+#endif /* defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_MASTER_INIT) */
 
 static void wait_for_pci_ready(void)
 {
 	int i;
 	char *s = getenv("pcidelay");
+	/*
+	 * We have our own handling of the pcidelay variable.
+	 * Using CONFIG_PCI_BOOTDELAY enables pausing for host
+	 * and adapter devices. For adapter devices we do not
+	 * want this.
+	 */
 	if (s) {
 		int ms = simple_strtoul(s, NULL, 10);
 		printf("PCI:   Waiting for %d ms\n", ms);
@@ -692,23 +755,37 @@ int post_hotkeys_pressed(void)
 #ifdef CONFIG_RESET_PHY_R
 void reset_phy(void)
 {
+	char *s;
+	unsigned short val_method, val_behavior;
+
+	/* special LED setup for NGCC/CANDES */
+	if ((s = getenv("bd_type")) &&
+	    ((!strcmp(s, "ngcc")) || (!strcmp(s, "candes")))) {
+		val_method   = 0x0e0a;
+		val_behavior = 0x0cf2;
+	} else {
+		/* PMC440 standard type */
+		val_method   = 0x0e10;
+		val_behavior = 0x0cf0;
+	}
+
 	if (miiphy_write("ppc_4xx_eth0", CONFIG_PHY_ADDR, 0x1f, 0x0001) == 0) {
 		miiphy_write("ppc_4xx_eth0", CONFIG_PHY_ADDR, 0x11, 0x0010);
-		miiphy_write("ppc_4xx_eth0", CONFIG_PHY_ADDR, 0x11, 0x0df0);
-		miiphy_write("ppc_4xx_eth0", CONFIG_PHY_ADDR, 0x10, 0x0e10);
+		miiphy_write("ppc_4xx_eth0", CONFIG_PHY_ADDR, 0x11, val_behavior);
+		miiphy_write("ppc_4xx_eth0", CONFIG_PHY_ADDR, 0x10, val_method);
 		miiphy_write("ppc_4xx_eth0", CONFIG_PHY_ADDR, 0x1f, 0x0000);
 	}
 
 	if (miiphy_write("ppc_4xx_eth1", CONFIG_PHY1_ADDR, 0x1f, 0x0001) == 0) {
 		miiphy_write("ppc_4xx_eth1", CONFIG_PHY1_ADDR, 0x11, 0x0010);
-		miiphy_write("ppc_4xx_eth1", CONFIG_PHY1_ADDR, 0x11, 0x0df0);
-		miiphy_write("ppc_4xx_eth1", CONFIG_PHY1_ADDR, 0x10, 0x0e10);
+		miiphy_write("ppc_4xx_eth1", CONFIG_PHY1_ADDR, 0x11, val_behavior);
+		miiphy_write("ppc_4xx_eth1", CONFIG_PHY1_ADDR, 0x10, val_method);
 		miiphy_write("ppc_4xx_eth1", CONFIG_PHY1_ADDR, 0x1f, 0x0000);
 	}
 }
 #endif
 
-#if defined(CFG_EEPROM_WREN)
+#if defined(CONFIG_SYS_EEPROM_WREN)
 /*
  *  Input: <dev_addr> I2C address of EEPROM device to enable.
  *         <state>    -1: deliver current state
@@ -720,8 +797,8 @@ void reset_phy(void)
  */
 int eeprom_write_enable(unsigned dev_addr, int state)
 {
-	if ((CFG_I2C_EEPROM_ADDR != dev_addr) &&
-	    (CFG_I2C_BOOT_EEPROM_ADDR != dev_addr)) {
+	if ((CONFIG_SYS_I2C_EEPROM_ADDR != dev_addr) &&
+	    (CONFIG_SYS_I2C_BOOT_EEPROM_ADDR != dev_addr)) {
 		return -1;
 	} else {
 		switch (state) {
@@ -743,9 +820,9 @@ int eeprom_write_enable(unsigned dev_addr, int state)
 	}
 	return state;
 }
-#endif /* #if defined(CFG_EEPROM_WREN) */
+#endif /* #if defined(CONFIG_SYS_EEPROM_WREN) */
 
-#define CFG_BOOT_EEPROM_PAGE_WRITE_BITS 3
+#define CONFIG_SYS_BOOT_EEPROM_PAGE_WRITE_BITS 3
 int bootstrap_eeprom_write(unsigned dev_addr, unsigned offset,
 			   uchar *buffer, unsigned cnt)
 {
@@ -753,7 +830,7 @@ int bootstrap_eeprom_write(unsigned dev_addr, unsigned offset,
 	unsigned blk_off;
 	int rcode = 0;
 
-#if defined(CFG_EEPROM_WREN)
+#if defined(CONFIG_SYS_EEPROM_WREN)
 	eeprom_write_enable(dev_addr, 1);
 #endif
 	/*
@@ -776,7 +853,7 @@ int bootstrap_eeprom_write(unsigned dev_addr, unsigned offset,
 
 		len = end - offset;
 
-#define	BOOT_EEPROM_PAGE_SIZE	   (1 << CFG_BOOT_EEPROM_PAGE_WRITE_BITS)
+#define	BOOT_EEPROM_PAGE_SIZE	   (1 << CONFIG_SYS_BOOT_EEPROM_PAGE_WRITE_BITS)
 #define	BOOT_EEPROM_PAGE_OFFSET(x) ((x) & (BOOT_EEPROM_PAGE_SIZE - 1))
 
 		maxlen = BOOT_EEPROM_PAGE_SIZE -
@@ -793,11 +870,11 @@ int bootstrap_eeprom_write(unsigned dev_addr, unsigned offset,
 		buffer += len;
 		offset += len;
 
-#if defined(CFG_EEPROM_PAGE_WRITE_DELAY_MS)
-		udelay(CFG_EEPROM_PAGE_WRITE_DELAY_MS * 1000);
+#if defined(CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS)
+		udelay(CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS * 1000);
 #endif
 	}
-#if defined(CFG_EEPROM_WREN)
+#if defined(CONFIG_SYS_EEPROM_WREN)
 	eeprom_write_enable(dev_addr, 0);
 #endif
 	return rcode;
@@ -845,13 +922,13 @@ int bootstrap_eeprom_read (unsigned dev_addr, unsigned offset,
 	return rcode;
 }
 
-#if defined(CONFIG_USB_OHCI_NEW) && defined(CFG_USB_OHCI_BOARD_INIT)
+#if defined(CONFIG_USB_OHCI_NEW) && defined(CONFIG_SYS_USB_OHCI_BOARD_INIT)
 int usb_board_init(void)
 {
 	char *act = getenv("usbact");
 	int i;
 
-	if ((act == NULL || strcmp(act, "hostdev") == 0) &&
+	if ((act == NULL || strcmp(act, "host") == 0) &&
 	    !(in_be32((void*)GPIO0_IR) & GPIO0_USB_PRSNT))
 		/* enable power on USB socket */
 		out_be32((void*)GPIO1_OR,
@@ -875,4 +952,25 @@ int usb_board_init_fail(void)
 	usb_board_stop();
 	return 0;
 }
-#endif /* defined(CONFIG_USB_OHCI) && defined(CFG_USB_OHCI_BOARD_INIT) */
+#endif /* defined(CONFIG_USB_OHCI) && defined(CONFIG_SYS_USB_OHCI_BOARD_INIT) */
+
+#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP)
+void ft_board_setup(void *blob, bd_t *bd)
+{
+	int rc;
+
+	__ft_board_setup(blob, bd);
+
+	/*
+	 * Disable PCI in non-monarch mode.
+	 */
+	if (!is_monarch()) {
+		rc = fdt_find_and_setprop(blob, "/plb/pci@1ec000000", "status",
+					  "disabled", sizeof("disabled"), 1);
+		if (rc) {
+			printf("Unable to update property status in PCI node, err=%s\n",
+			       fdt_strerror(rc));
+		}
+	}
+}
+#endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */
diff --git a/board/esd/pmc440/pmc440.h b/board/esd/pmc440/pmc440.h
index 7e70fd1cb..295cec1e3 100644
--- a/board/esd/pmc440/pmc440.h
+++ b/board/esd/pmc440/pmc440.h
@@ -1,5 +1,5 @@
 /*
- * (C) Copyright 2007
+ * (C) Copyright 2007-2008
  * Matthias Fuchs, esd gmbh, matthias.fuchs@esd-electronics.com.
  *
  * See file CREDITS for list of people who contributed to this
@@ -24,8 +24,7 @@
 #ifndef __PMC440_H__
 #define __PMC440_H__
 
-
-/*-----------------------------------------------------------------------
+/*
  * GPIOs
  */
 #define GPIO1_INTA_FAKE           (0x80000000 >> (45-32)) /* GPIO45 OD */
@@ -41,9 +40,10 @@
 #define GPIO0_EP_EEP              (0x80000000 >> 23)      /* GPIO23 O */
 #define GPIO0_USB_ID              (0x80000000 >> 21)      /* GPIO21 I */
 #define GPIO0_USB_PRSNT           (0x80000000 >> 20)      /* GPIO20 I */
-#define GPIO0_SELF_RST            (0x80000000 >> 6)       /* GPIO6  OD */
 
-/* FPGA programming pin configuration */
+/*
+ * FPGA programming pin configuration
+ */
 #define GPIO1_FPGA_PRG            (0x80000000 >> (53-32)) /* FPGA program pin (ppc output) */
 #define GPIO1_FPGA_CLK            (0x80000000 >> (51-32)) /* FPGA clk pin (ppc output)     */
 #define GPIO1_FPGA_DATA           (0x80000000 >> (52-32)) /* FPGA data pin (ppc output)    */
@@ -51,10 +51,10 @@
 #define GPIO1_FPGA_INIT           (0x80000000 >> (54-32)) /* FPGA init pin (ppc input)     */
 #define GPIO0_FPGA_FORCEINIT      (0x80000000 >> 27)      /* low: force INIT# low */
 
-/*-----------------------------------------------------------------------
+/*
  * FPGA interface
  */
-#define FPGA_BA CFG_FPGA_BASE0
+#define FPGA_BA CONFIG_SYS_FPGA_BASE0
 #define FPGA_OUT32(p,v) out_be32(((void*)(p)), (v))
 #define FPGA_IN32(p) in_be32((void*)(p))
 #define FPGA_SETBITS(p,v) out_be32(((void*)(p)), in_be32((void*)(p)) | (v))
@@ -103,7 +103,6 @@ typedef struct pmc440_fpga_s pmc440_fpga_t;
 #define RESET_OUT   (1 << 19)
 #define IRIGB_R_OUT (1 << 14)
 
-
 /* status register */
 #define STATUS_VERSION_SHIFT 24
 #define STATUS_VERSION_MASK  0xff000000
@@ -115,13 +114,11 @@ typedef struct pmc440_fpga_s pmc440_fpga_t;
 #define STATUS_FIFO_ISF      (1 <<  9)
 #define STATUS_HOST_ISF      (1 <<  8)
 
-
 /* inputs */
 #define RESET_IN    (1 << 0)
 #define CLOCK_IN    (1 << 1)
 #define IRIGB_R_IN  (1 << 5)
 
-
 /* hostctrl register */
 #define HOSTCTRL_PMCRSTOUT_GATE (1 <<  17)
 #define HOSTCTRL_PMCRSTOUT_FLAG (1 <<  16)
@@ -134,10 +131,10 @@ typedef struct pmc440_fpga_s pmc440_fpga_t;
 #define HOSTCTRL_HCINT_GATE  (1 <<  1)
 #define HOSTCTRL_HCINT_FLAG  (1 <<  0)
 
-#define NGCC_CTRL_BASE         (CFG_FPGA_BASE0 + 0x80000)
+#define NGCC_CTRL_BASE         (CONFIG_SYS_FPGA_BASE0 + 0x80000)
 #define NGCC_CTRL_FPGARST_N    (1 <<  2)
 
-/*-----------------------------------------------------------------------
+/*
  * FPGA to PPC interrupt
  */
 #define IRQ0_FPGA            (32+28) /* UIC1 - FPGA internal */
diff --git a/board/esd/pmc440/sdram.c b/board/esd/pmc440/sdram.c
index c7294c994..197857ad0 100644
--- a/board/esd/pmc440/sdram.c
+++ b/board/esd/pmc440/sdram.c
@@ -111,5 +111,5 @@ phys_size_t initdram (int board_type)
 	 */
 	set_mcsr(get_mcsr());
 
-	return (CFG_MBYTES_SDRAM << 20);
+	return (CONFIG_SYS_MBYTES_SDRAM << 20);
 }
diff --git a/board/esd/pmc440/u-boot-nand.lds b/board/esd/pmc440/u-boot-nand.lds
index ae2e18de4..6e1e16997 100644
--- a/board/esd/pmc440/u-boot-nand.lds
+++ b/board/esd/pmc440/u-boot-nand.lds
@@ -57,7 +57,7 @@ SECTIONS
 
     /* Align to next NAND block */
     . = ALIGN(0x4000);
-    common/environment.o  (.ppcenv)
+    common/env_embedded.o  (.ppcenv)
     /* Keep some space here for redundant env and potential bad env blocks */
     . = ALIGN(0x10000);
 
@@ -129,6 +129,7 @@ SECTIONS
    *(.dynbss)
    *(.bss)
    *(COMMON)
+   . = ALIGN(4);
   }
 
   _end = . ;
diff --git a/board/esd/pmc440/u-boot.lds b/board/esd/pmc440/u-boot.lds
index b20fb1c0a..05152b7f7 100644
--- a/board/esd/pmc440/u-boot.lds
+++ b/board/esd/pmc440/u-boot.lds
@@ -135,9 +135,10 @@ SECTIONS
    *(.dynbss)
    *(.bss)
    *(COMMON)
+   . = ALIGN(4);
   }
 
-  ppcenv_assert = ASSERT(. < 0xFFFF8000, ".bss section too big, overlaps .ppcenv section. Please update your confguration: CFG_MONITOR_BASE, CFG_MONITOR_LEN and TEXT_BASE may need to be modified.");
+  ppcenv_assert = ASSERT(. < 0xFFFF8000, ".bss section too big, overlaps .ppcenv section. Please update your confguration: CONFIG_SYS_MONITOR_BASE, CONFIG_SYS_MONITOR_LEN and TEXT_BASE may need to be modified.");
 
   _end = . ;
   PROVIDE (end = .);
diff --git a/board/esd/tasreg/flash.c b/board/esd/tasreg/flash.c
index 13c07d2d3..ce905e94c 100644
--- a/board/esd/tasreg/flash.c
+++ b/board/esd/tasreg/flash.c
@@ -45,13 +45,13 @@ unsigned long flash_init (void)
 	int i;
 
 	/* Init: no FLASHes known */
-	for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) {
+	for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
 		flash_info[i].flash_id = FLASH_UNKNOWN;
 	}
 
 	/* Static FLASH Bank configuration here - FIXME XXX */
 
-	size_b0 = flash_get_size((vu_long *)CFG_FLASH_BASE, &flash_info[0]);
+	size_b0 = flash_get_size((vu_long *)CONFIG_SYS_FLASH_BASE, &flash_info[0]);
 
 	if (flash_info[0].flash_id == FLASH_UNKNOWN) {
 		printf ("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n",
@@ -65,8 +65,8 @@ unsigned long flash_init (void)
 
 	/* Monitor protection ON by default */
 	(void)flash_protect(FLAG_PROTECT_SET,
-			    CFG_FLASH_BASE,
-			    CFG_FLASH_BASE+CFG_MONITOR_LEN-1,
+			    CONFIG_SYS_FLASH_BASE,
+			    CONFIG_SYS_FLASH_BASE+CONFIG_SYS_MONITOR_LEN-1,
 			    &flash_info[0]);
 
 	flash_info[0].size = size_b0;
diff --git a/board/esd/tasreg/tasreg.c b/board/esd/tasreg/tasreg.c
index fabb7464f..64e6d6329 100644
--- a/board/esd/tasreg/tasreg.c
+++ b/board/esd/tasreg/tasreg.c
@@ -40,8 +40,8 @@ int i2c_read(uchar chip, uint addr, int alen, uchar *buffer, int len);
 
 /* predefine these here for FPGA programming (before including fpga.c) */
 #define SET_FPGA(data)  mbar2_writeLong(MCFSIM_GPIO1_OUT, data)
-#define FPGA_DONE_STATE (mbar2_readLong(MCFSIM_GPIO1_READ) & CFG_FPGA_DONE)
-#define FPGA_INIT_STATE (mbar2_readLong(MCFSIM_GPIO1_READ) & CFG_FPGA_INIT)
+#define FPGA_DONE_STATE (mbar2_readLong(MCFSIM_GPIO1_READ) & CONFIG_SYS_FPGA_DONE)
+#define FPGA_INIT_STATE (mbar2_readLong(MCFSIM_GPIO1_READ) & CONFIG_SYS_FPGA_INIT)
 #define FPGA_PROG_ACTIVE_HIGH          /* on this platform is PROG active high!   */
 #define out32(a,b)                     /* nothing to do (gpio already configured) */
 
@@ -70,7 +70,7 @@ int checkboard (void) {
 	/*
 	 * Set LED on
 	 */
-	val = mbar2_readLong(MCFSIM_GPIO1_OUT) & ~CFG_GPIO1_LED;
+	val = mbar2_readLong(MCFSIM_GPIO1_OUT) & ~CONFIG_SYS_GPIO1_LED;
 	mbar2_writeLong(MCFSIM_GPIO1_OUT, val);   /* Set LED on */
 
 	return 0;
@@ -85,13 +85,13 @@ phys_size_t initdram (int board_type) {
 	 *	RC = ([(RefreshTime/#rows) / (1/BusClk)] / 16) - 1
 	 */
 
-#ifdef CFG_FAST_CLK
+#ifdef CONFIG_SYS_FAST_CLK
 	/*
 	 * Busclk=70MHz, RefreshTime=64ms, #rows=4096 (4K)
 	 * SO=1, NAM=0, COC=0, RTIM=01 (6clk refresh), RC=39
 	 */
 	mbar_writeShort(MCFSIM_DCR, 0x8239);
-#elif CFG_PLL_BYPASS
+#elif CONFIG_SYS_PLL_BYPASS
 	/*
 	 * Busclk=5.6448MHz, RefreshTime=64ms, #rows=8192 (8K)
 	 * SO=1, NAM=0, COC=0, RTIM=01 (6clk refresh), RC=02
@@ -129,7 +129,7 @@ phys_size_t initdram (int board_type) {
 	mbar_writeLong(MCFSIM_DACR0, 0x0000b364);  /* Enable DACR0[IMRS] (bit 6); RE remains enabled */
 	*((volatile unsigned long *) 0x800) = junk; /* Access RAM to initialize the mode register */
 
-	return CFG_SDRAM_SIZE * 1024 * 1024;
+	return CONFIG_SYS_SDRAM_SIZE * 1024 * 1024;
 };
 
 
@@ -150,8 +150,8 @@ int misc_init_r (void)
 	int i;
 	uchar buf[8];
 
-	dst = malloc(CFG_FPGA_MAX_SIZE);
-	if (gunzip (dst, CFG_FPGA_MAX_SIZE, (uchar *)fpgadata, &len) != 0) {
+	dst = malloc(CONFIG_SYS_FPGA_MAX_SIZE);
+	if (gunzip (dst, CONFIG_SYS_FPGA_MAX_SIZE, (uchar *)fpgadata, &len) != 0) {
 		printf ("GUNZIP ERROR - must RESET board to recover\n");
 		do_reset (NULL, 0, 0, NULL);
 	}
diff --git a/board/esd/tasreg/u-boot.lds b/board/esd/tasreg/u-boot.lds
index afdb7202c..aec7e9bf4 100644
--- a/board/esd/tasreg/u-boot.lds
+++ b/board/esd/tasreg/u-boot.lds
@@ -62,7 +62,7 @@ SECTIONS
     lib_generic/zlib.o		(.text)
 
     . = DEFINED(env_offset) ? env_offset : .;
-    common/environment.o	(.text)
+    common/env_embedded.o	(.text)
 
     *(.text)
     *(.fixup)
diff --git a/board/esd/voh405/flash.c b/board/esd/voh405/flash.c
index 89af1190a..274ada9fe 100644
--- a/board/esd/voh405/flash.c
+++ b/board/esd/voh405/flash.c
@@ -48,7 +48,7 @@ unsigned long flash_init (void)
 	int size_val = 0;
 
 	/* Init: no FLASHes known */
-	for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) {
+	for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
 		flash_info[i].flash_id = FLASH_UNKNOWN;
 	}
 
@@ -91,7 +91,7 @@ unsigned long flash_init (void)
 
 	/* Monitor protection ON by default */
 	(void)flash_protect(FLAG_PROTECT_SET,
-			    -CFG_MONITOR_LEN,
+			    -CONFIG_SYS_MONITOR_LEN,
 			    0xffffffff,
 			    &flash_info[0]);
 
diff --git a/board/esd/voh405/u-boot.lds b/board/esd/voh405/u-boot.lds
index d70d37934..d8fbea396 100644
--- a/board/esd/voh405/u-boot.lds
+++ b/board/esd/voh405/u-boot.lds
@@ -66,14 +66,14 @@ SECTIONS
     cpu/ppc4xx/4xx_uart.o	(.text)
     cpu/ppc4xx/cpu_init.o	(.text)
     cpu/ppc4xx/speed.o	(.text)
-    cpu/ppc4xx/4xx_enet.o	(.text)
+    drivers/net/4xx_enet.o	(.text)
     common/dlmalloc.o	(.text)
     lib_generic/crc32.o		(.text)
     lib_ppc/extable.o	(.text)
     lib_generic/zlib.o		(.text)
 
 /*    . = env_offset;*/
-/*    common/environment.o(.text)*/
+/*    common/env_embedded.o(.text)*/
 
     *(.text)
     *(.fixup)
@@ -144,6 +144,7 @@ SECTIONS
    *(.dynbss)
    *(.bss)
    *(COMMON)
+   . = ALIGN(4);
   }
   _end = . ;
   PROVIDE (end = .);
diff --git a/board/esd/voh405/voh405.c b/board/esd/voh405/voh405.c
index 52534220a..ec65ffd43 100644
--- a/board/esd/voh405/voh405.c
+++ b/board/esd/voh405/voh405.c
@@ -104,21 +104,14 @@ int board_early_init_f (void)
 	return 0;
 }
 
-
-int misc_init_f (void)
-{
-	return 0;  /* dummy implementation */
-}
-
-
 int misc_init_r (void)
 {
 	unsigned char *duart0_mcr = (unsigned char *)((ulong)DUART0_BA + 4);
 	unsigned char *duart1_mcr = (unsigned char *)((ulong)DUART1_BA + 4);
 	unsigned short *lcd_contrast =
-		(unsigned short *)((ulong)CFG_FPGA_BASE_ADDR + CFG_FPGA_CTRL + 4);
+		(unsigned short *)((ulong)CONFIG_SYS_FPGA_BASE_ADDR + CONFIG_SYS_FPGA_CTRL + 4);
 	unsigned short *lcd_backlight =
-		(unsigned short *)((ulong)CFG_FPGA_BASE_ADDR + CFG_FPGA_CTRL + 6);
+		(unsigned short *)((ulong)CONFIG_SYS_FPGA_BASE_ADDR + CONFIG_SYS_FPGA_CTRL + 6);
 	unsigned char *dst;
 	ulong len = sizeof(fpgadata);
 	int status;
@@ -126,8 +119,8 @@ int misc_init_r (void)
 	int i;
 	char *str;
 
-	dst = malloc(CFG_FPGA_MAX_SIZE);
-	if (gunzip (dst, CFG_FPGA_MAX_SIZE, (uchar *)fpgadata, &len) != 0) {
+	dst = malloc(CONFIG_SYS_FPGA_MAX_SIZE);
+	if (gunzip (dst, CONFIG_SYS_FPGA_MAX_SIZE, (uchar *)fpgadata, &len) != 0) {
 		printf ("GUNZIP ERROR - must RESET board to recover\n");
 		do_reset (NULL, 0, 0, NULL);
 	}
@@ -190,22 +183,22 @@ int misc_init_r (void)
 	/*
 	 * Reset external DUARTs
 	 */
-	out_be32((void*)GPIO0_OR, in_be32((void*)GPIO0_OR) | CFG_DUART_RST); /* set reset to high */
+	out_be32((void*)GPIO0_OR, in_be32((void*)GPIO0_OR) | CONFIG_SYS_DUART_RST); /* set reset to high */
 	udelay(10); /* wait 10us */
-	out_be32((void*)GPIO0_OR, in_be32((void*)GPIO0_OR) & ~CFG_DUART_RST); /* set reset to low */
+	out_be32((void*)GPIO0_OR, in_be32((void*)GPIO0_OR) & ~CONFIG_SYS_DUART_RST); /* set reset to low */
 	udelay(1000); /* wait 1ms */
 
 	/*
 	 * Set NAND-FLASH GPIO signals to default
 	 */
-	out_be32((void*)GPIO0_OR, in_be32((void*)GPIO0_OR) & ~(CFG_NAND_CLE | CFG_NAND_ALE));
-	out_be32((void*)GPIO0_OR, in_be32((void*)GPIO0_OR) | CFG_NAND_CE);
+	out_be32((void*)GPIO0_OR, in_be32((void*)GPIO0_OR) & ~(CONFIG_SYS_NAND_CLE | CONFIG_SYS_NAND_ALE));
+	out_be32((void*)GPIO0_OR, in_be32((void*)GPIO0_OR) | CONFIG_SYS_NAND_CE);
 
 	/*
 	 * Setup EEPROM write protection
 	 */
-	out_be32((void*)GPIO0_OR, in_be32((void*)GPIO0_OR) | CFG_EEPROM_WP);
-	out_be32((void*)GPIO0_TCR, in_be32((void*)GPIO0_TCR) | CFG_EEPROM_WP);
+	out_be32((void*)GPIO0_OR, in_be32((void*)GPIO0_OR) | CONFIG_SYS_EEPROM_WP);
+	out_be32((void*)GPIO0_TCR, in_be32((void*)GPIO0_TCR) | CONFIG_SYS_EEPROM_WP);
 
 	/*
 	 * Enable interrupts in exar duart mcr[3]
@@ -219,29 +212,29 @@ int misc_init_r (void)
 	str = getenv("bd_type");
 	if (strcmp(str, "voh405_bw") == 0) {
 		lcd_setup(0, 1);
-		lcd_init((uchar *)CFG_LCD_SMALL_REG, (uchar *)CFG_LCD_SMALL_MEM,
+		lcd_init((uchar *)CONFIG_SYS_LCD_SMALL_REG, (uchar *)CONFIG_SYS_LCD_SMALL_MEM,
 			 regs_13704_320_240_4bpp,
 			 sizeof(regs_13704_320_240_4bpp)/sizeof(regs_13704_320_240_4bpp[0]),
 			 logo_bmp_320, sizeof(logo_bmp_320));
 	} else if (strcmp(str, "voh405_bwbw") == 0) {
 		lcd_setup(0, 1);
-		lcd_init((uchar *)CFG_LCD_SMALL_REG, (uchar *)CFG_LCD_SMALL_MEM,
+		lcd_init((uchar *)CONFIG_SYS_LCD_SMALL_REG, (uchar *)CONFIG_SYS_LCD_SMALL_MEM,
 			 regs_13704_320_240_4bpp,
 			 sizeof(regs_13704_320_240_4bpp)/sizeof(regs_13704_320_240_4bpp[0]),
 			 logo_bmp_320, sizeof(logo_bmp_320));
 		lcd_setup(1, 1);
-		lcd_init((uchar *)CFG_LCD_BIG_REG, (uchar *)CFG_LCD_BIG_MEM,
+		lcd_init((uchar *)CONFIG_SYS_LCD_BIG_REG, (uchar *)CONFIG_SYS_LCD_BIG_MEM,
 			 regs_13806_320_240_4bpp,
 			 sizeof(regs_13806_320_240_4bpp)/sizeof(regs_13806_320_240_4bpp[0]),
 			 logo_bmp_320, sizeof(logo_bmp_320));
 	} else if (strcmp(str, "voh405_bwc") == 0) {
 		lcd_setup(0, 1);
-		lcd_init((uchar *)CFG_LCD_SMALL_REG, (uchar *)CFG_LCD_SMALL_MEM,
+		lcd_init((uchar *)CONFIG_SYS_LCD_SMALL_REG, (uchar *)CONFIG_SYS_LCD_SMALL_MEM,
 			 regs_13704_320_240_4bpp,
 			 sizeof(regs_13704_320_240_4bpp)/sizeof(regs_13704_320_240_4bpp[0]),
 			 logo_bmp_320, sizeof(logo_bmp_320));
 		lcd_setup(1, 0);
-		lcd_init((uchar *)CFG_LCD_BIG_REG, (uchar *)CFG_LCD_BIG_MEM,
+		lcd_init((uchar *)CONFIG_SYS_LCD_BIG_REG, (uchar *)CONFIG_SYS_LCD_BIG_MEM,
 			 regs_13806_640_480_16bpp,
 			 sizeof(regs_13806_640_480_16bpp)/sizeof(regs_13806_640_480_16bpp[0]),
 			 logo_bmp_640, sizeof(logo_bmp_640));
@@ -253,8 +246,8 @@ int misc_init_r (void)
 	/*
 	 * Set invert bit in small lcd controller
 	 */
-	out_8((unsigned char *)(CFG_LCD_SMALL_REG + 2),
-	      in_8((unsigned char *)(CFG_LCD_SMALL_REG + 2)) | 0x01);
+	out_8((unsigned char *)(CONFIG_SYS_LCD_SMALL_REG + 2),
+	      in_8((unsigned char *)(CONFIG_SYS_LCD_SMALL_REG + 2)) | 0x01);
 
 	/*
 	 * Set default contrast voltage on epson vga controller
@@ -269,7 +262,7 @@ int misc_init_r (void)
 	/*
 	 * Enable external I2C bus
 	 */
-	out_be32((void*)GPIO0_TCR, in_be32((void*)GPIO0_TCR) | CFG_IIC_ON);
+	out_be32((void*)GPIO0_TCR, in_be32((void*)GPIO0_TCR) | CONFIG_SYS_IIC_ON);
 
 	return (0);
 }
@@ -303,48 +296,19 @@ int checkboard (void)
 	return 0;
 }
 
-/* ------------------------------------------------------------------------- */
-
-phys_size_t initdram (int board_type)
-{
-	unsigned long val;
-
-	mtdcr(memcfga, mem_mb0cf);
-	val = mfdcr(memcfgd);
-
-#if 0
-	printf("\nmb0cf=%x\n", val); /* test-only */
-	printf("strap=%x\n", mfdcr(strap)); /* test-only */
-#endif
-
-	return (4*1024*1024 << ((val & 0x000e0000) >> 17));
-}
-
-/* ------------------------------------------------------------------------- */
-
-int testdram (void)
-{
-	/* TODO: XXX XXX XXX */
-	printf ("test: 16 MB - ok\n");
-
-	return (0);
-}
-
-/* ------------------------------------------------------------------------- */
-
 #ifdef CONFIG_IDE_RESET
 void ide_set_reset(int on)
 {
 	volatile unsigned short *fpga_mode =
-		(unsigned short *)((ulong)CFG_FPGA_BASE_ADDR + CFG_FPGA_CTRL);
+		(unsigned short *)((ulong)CONFIG_SYS_FPGA_BASE_ADDR + CONFIG_SYS_FPGA_CTRL);
 
 	/*
 	 * Assert or deassert CompactFlash Reset Pin
 	 */
 	if (on) {		/* assert RESET */
-		*fpga_mode &= ~(CFG_FPGA_CTRL_CF_RESET);
+		*fpga_mode &= ~(CONFIG_SYS_FPGA_CTRL_CF_RESET);
 	} else {		/* release RESET */
-		*fpga_mode |= CFG_FPGA_CTRL_CF_RESET;
+		*fpga_mode |= CONFIG_SYS_FPGA_CTRL_CF_RESET;
 	}
 }
 #endif /* CONFIG_IDE_RESET */
@@ -362,7 +326,7 @@ void reset_phy(void)
 }
 #endif
 
-#if defined(CFG_EEPROM_WREN)
+#if defined(CONFIG_SYS_EEPROM_WREN)
 /* Input: <dev_addr>  I2C address of EEPROM device to enable.
  *         <state>     -1: deliver current state
  *	               0: disable write
@@ -373,23 +337,23 @@ void reset_phy(void)
  */
 int eeprom_write_enable (unsigned dev_addr, int state)
 {
-	if (CFG_I2C_EEPROM_ADDR != dev_addr) {
+	if (CONFIG_SYS_I2C_EEPROM_ADDR != dev_addr) {
 		return -1;
 	} else {
 		switch (state) {
 		case 1:
 			/* Enable write access, clear bit GPIO0. */
-			out_be32((void*)GPIO0_OR, in_be32((void*)GPIO0_OR) & ~CFG_EEPROM_WP);
+			out_be32((void*)GPIO0_OR, in_be32((void*)GPIO0_OR) & ~CONFIG_SYS_EEPROM_WP);
 			state = 0;
 			break;
 		case 0:
 			/* Disable write access, set bit GPIO0. */
-			out_be32((void*)GPIO0_OR, in_be32((void*)GPIO0_OR) | CFG_EEPROM_WP);
+			out_be32((void*)GPIO0_OR, in_be32((void*)GPIO0_OR) | CONFIG_SYS_EEPROM_WP);
 			state = 0;
 			break;
 		default:
 			/* Read current status back. */
-			state = (0 == (in_be32((void*)GPIO0_OR) & CFG_EEPROM_WP));
+			state = (0 == (in_be32((void*)GPIO0_OR) & CONFIG_SYS_EEPROM_WP));
 			break;
 		}
 	}
@@ -403,21 +367,21 @@ int do_eep_wren (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 
 	if (query) {
 		/* Query write access state. */
-		state = eeprom_write_enable (CFG_I2C_EEPROM_ADDR, -1);
+		state = eeprom_write_enable (CONFIG_SYS_I2C_EEPROM_ADDR, -1);
 		if (state < 0) {
 			puts ("Query of write access state failed.\n");
 		} else {
 			printf ("Write access for device 0x%0x is %sabled.\n",
-				CFG_I2C_EEPROM_ADDR, state ? "en" : "dis");
+				CONFIG_SYS_I2C_EEPROM_ADDR, state ? "en" : "dis");
 			state = 0;
 		}
 	} else {
 		if ('0' == argv[1][0]) {
 			/* Disable write access. */
-			state = eeprom_write_enable (CFG_I2C_EEPROM_ADDR, 0);
+			state = eeprom_write_enable (CONFIG_SYS_I2C_EEPROM_ADDR, 0);
 		} else {
 			/* Enable write access. */
-			state = eeprom_write_enable (CFG_I2C_EEPROM_ADDR, 1);
+			state = eeprom_write_enable (CONFIG_SYS_I2C_EEPROM_ADDR, 1);
 		}
 		if (state < 0) {
 			puts ("Setup of write access state failed.\n");
@@ -430,4 +394,4 @@ int do_eep_wren (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 U_BOOT_CMD(eepwren,	2,	0,	do_eep_wren,
 	   "eepwren - Enable / disable / query EEPROM write access\n",
 	   NULL);
-#endif /* #if defined(CFG_EEPROM_WREN) */
+#endif /* #if defined(CONFIG_SYS_EEPROM_WREN) */
diff --git a/board/esd/vom405/flash.c b/board/esd/vom405/flash.c
index 89af1190a..274ada9fe 100644
--- a/board/esd/vom405/flash.c
+++ b/board/esd/vom405/flash.c
@@ -48,7 +48,7 @@ unsigned long flash_init (void)
 	int size_val = 0;
 
 	/* Init: no FLASHes known */
-	for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) {
+	for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
 		flash_info[i].flash_id = FLASH_UNKNOWN;
 	}
 
@@ -91,7 +91,7 @@ unsigned long flash_init (void)
 
 	/* Monitor protection ON by default */
 	(void)flash_protect(FLAG_PROTECT_SET,
-			    -CFG_MONITOR_LEN,
+			    -CONFIG_SYS_MONITOR_LEN,
 			    0xffffffff,
 			    &flash_info[0]);
 
diff --git a/board/esd/vom405/u-boot.lds b/board/esd/vom405/u-boot.lds
index 21547ac27..c9472f934 100644
--- a/board/esd/vom405/u-boot.lds
+++ b/board/esd/vom405/u-boot.lds
@@ -61,18 +61,6 @@ SECTIONS
     /* the sector layout of our flash chips!	XXX FIXME XXX	*/
 
     cpu/ppc4xx/start.o	(.text)
-    cpu/ppc4xx/traps.o	(.text)
-    cpu/ppc4xx/interrupts.o	(.text)
-    cpu/ppc4xx/4xx_uart.o	(.text)
-    cpu/ppc4xx/cpu_init.o	(.text)
-    cpu/ppc4xx/speed.o	(.text)
-    common/dlmalloc.o	(.text)
-    lib_generic/crc32.o		(.text)
-    lib_ppc/extable.o	(.text)
-    lib_generic/zlib.o		(.text)
-
-/*    . = env_offset;*/
-/*    common/environment.o(.text)*/
 
     *(.text)
     *(.fixup)
@@ -143,6 +131,7 @@ SECTIONS
    *(.dynbss)
    *(.bss)
    *(COMMON)
+   . = ALIGN(4);
   }
   _end = . ;
   PROVIDE (end = .);
diff --git a/board/esd/vom405/vom405.c b/board/esd/vom405/vom405.c
index af8efcff3..1b1479f43 100644
--- a/board/esd/vom405/vom405.c
+++ b/board/esd/vom405/vom405.c
@@ -37,7 +37,6 @@ const unsigned char fpgadata[] =
 };
 int filesize = sizeof(fpgadata);
 
-
 int board_early_init_f (void)
 {
 	/*
@@ -76,9 +75,6 @@ int board_early_init_f (void)
 	return 0;
 }
 
-
-/* ------------------------------------------------------------------------- */
-
 int misc_init_r (void)
 {
 	/* adjust flash start and offset */
@@ -88,11 +84,9 @@ int misc_init_r (void)
 	return (0);
 }
 
-
 /*
  * Check Board Identity:
  */
-
 int checkboard (void)
 {
 	char str[64];
@@ -127,25 +121,6 @@ int checkboard (void)
 	return 0;
 }
 
-/* ------------------------------------------------------------------------- */
-
-phys_size_t initdram (int board_type)
-{
-	unsigned long val;
-
-	mtdcr(memcfga, mem_mb0cf);
-	val = mfdcr(memcfgd);
-
-#if 0
-	printf("\nmb0cf=%x\n", val); /* test-only */
-	printf("strap=%x\n", mfdcr(strap)); /* test-only */
-#endif
-
-	return (4*1024*1024 << ((val & 0x000e0000) >> 17));
-}
-
-/* ------------------------------------------------------------------------- */
-
 void reset_phy(void)
 {
 #ifdef CONFIG_LXT971_NO_SLEEP
diff --git a/board/esd/wuh405/flash.c b/board/esd/wuh405/flash.c
index 89af1190a..274ada9fe 100644
--- a/board/esd/wuh405/flash.c
+++ b/board/esd/wuh405/flash.c
@@ -48,7 +48,7 @@ unsigned long flash_init (void)
 	int size_val = 0;
 
 	/* Init: no FLASHes known */
-	for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) {
+	for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
 		flash_info[i].flash_id = FLASH_UNKNOWN;
 	}
 
@@ -91,7 +91,7 @@ unsigned long flash_init (void)
 
 	/* Monitor protection ON by default */
 	(void)flash_protect(FLAG_PROTECT_SET,
-			    -CFG_MONITOR_LEN,
+			    -CONFIG_SYS_MONITOR_LEN,
 			    0xffffffff,
 			    &flash_info[0]);
 
diff --git a/board/esd/wuh405/u-boot.lds b/board/esd/wuh405/u-boot.lds
index 644174a46..e2e2512e7 100644
--- a/board/esd/wuh405/u-boot.lds
+++ b/board/esd/wuh405/u-boot.lds
@@ -72,7 +72,7 @@ SECTIONS
     lib_generic/zlib.o		(.text)
 
 /*    . = env_offset;*/
-/*    common/environment.o(.text)*/
+/*    common/env_embedded.o(.text)*/
 
     *(.text)
     *(.fixup)
@@ -142,6 +142,7 @@ SECTIONS
    *(.dynbss)
    *(.bss)
    *(COMMON)
+   . = ALIGN(4);
   }
   _end = . ;
   PROVIDE (end = .);
diff --git a/board/esd/wuh405/wuh405.c b/board/esd/wuh405/wuh405.c
index 0590fc78f..5eca3bd38 100644
--- a/board/esd/wuh405/wuh405.c
+++ b/board/esd/wuh405/wuh405.c
@@ -80,15 +80,6 @@ int board_early_init_f (void)
 	return 0;
 }
 
-
-/* ------------------------------------------------------------------------- */
-
-int misc_init_f (void)
-{
-	return 0;  /* dummy implementation */
-}
-
-
 int misc_init_r (void)
 {
 	volatile unsigned char *duart0_mcr = (unsigned char *)((ulong)DUART0_BA + 4);
@@ -101,8 +92,8 @@ int misc_init_r (void)
 	int index;
 	int i;
 
-	dst = malloc(CFG_FPGA_MAX_SIZE);
-	if (gunzip (dst, CFG_FPGA_MAX_SIZE, (uchar *)fpgadata, &len) != 0) {
+	dst = malloc(CONFIG_SYS_FPGA_MAX_SIZE);
+	if (gunzip (dst, CONFIG_SYS_FPGA_MAX_SIZE, (uchar *)fpgadata, &len) != 0) {
 		printf ("GUNZIP ERROR - must RESET board to recover\n");
 		do_reset (NULL, 0, 0, NULL);
 	}
@@ -164,9 +155,9 @@ int misc_init_r (void)
 	/*
 	 * Reset external DUARTs
 	 */
-	out32(GPIO0_OR, in32(GPIO0_OR) | CFG_DUART_RST); /* set reset to high */
+	out32(GPIO0_OR, in32(GPIO0_OR) | CONFIG_SYS_DUART_RST); /* set reset to high */
 	udelay(10); /* wait 10us */
-	out32(GPIO0_OR, in32(GPIO0_OR) & ~CFG_DUART_RST); /* set reset to low */
+	out32(GPIO0_OR, in32(GPIO0_OR) & ~CONFIG_SYS_DUART_RST); /* set reset to low */
 	udelay(1000); /* wait 1ms */
 
 	/*
@@ -202,15 +193,3 @@ int checkboard (void)
 
 	return 0;
 }
-
-/* ------------------------------------------------------------------------- */
-
-phys_size_t initdram (int board_type)
-{
-	unsigned long val;
-
-	mtdcr(memcfga, mem_mb0cf);
-	val = mfdcr(memcfgd);
-
-	return (4*1024*1024 << ((val & 0x000e0000) >> 17));
-}
diff --git a/board/esteem192e/esteem192e.c b/board/esteem192e/esteem192e.c
index f3c8662cd..b784cbb5b 100644
--- a/board/esteem192e/esteem192e.c
+++ b/board/esteem192e/esteem192e.c
@@ -103,7 +103,7 @@ int checkboard (void)
 
 phys_size_t initdram (int board_type)
 {
-	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
 	volatile memctl8xx_t *memctl = &immap->im_memctl;
 	long int size_b0, size_b1;
 
@@ -113,7 +113,7 @@ phys_size_t initdram (int board_type)
 
 	memctl->memc_mptpr = 0x0200;	/* divide by 32 */
 
-	memctl->memc_mamr = 0x18003112;	/*CFG_MAMR_8COL; */ /* 0x18005112 TODO: explain here */
+	memctl->memc_mamr = 0x18003112;	/*CONFIG_SYS_MAMR_8COL; */ /* 0x18005112 TODO: explain here */
 
 	upmconfig (UPMA, (uint *) sdram_table,
 		   sizeof (sdram_table) / sizeof (uint));
@@ -124,11 +124,11 @@ phys_size_t initdram (int board_type)
 	 * SDRAM size has been determined.
 	 */
 
-	memctl->memc_or2 = CFG_OR2_PRELIM;	/* not defined yet */
-	memctl->memc_br2 = CFG_BR2_PRELIM;
+	memctl->memc_or2 = CONFIG_SYS_OR2_PRELIM;	/* not defined yet */
+	memctl->memc_br2 = CONFIG_SYS_BR2_PRELIM;
 
-	memctl->memc_or3 = CFG_OR3_PRELIM;
-	memctl->memc_br3 = CFG_BR3_PRELIM;
+	memctl->memc_or3 = CONFIG_SYS_OR3_PRELIM;
+	memctl->memc_br3 = CONFIG_SYS_BR3_PRELIM;
 
 
 	/* perform SDRAM initializsation sequence */
@@ -139,7 +139,7 @@ phys_size_t initdram (int board_type)
 	memctl->memc_mcr = 0x80006830;	/* SDRAM bank 1 execute 8 refresh */
 	memctl->memc_mcr = 0x80006105;	/* SDRAM bank 1 */
 
-	memctl->memc_mamr = CFG_MAMR_8COL;	/* 0x18803112  start refresh timer TODO: explain here */
+	memctl->memc_mamr = CONFIG_SYS_MAMR_8COL;	/* 0x18803112  start refresh timer TODO: explain here */
 
 /* printf ("banks 0 and 1 are programed\n"); */
 
diff --git a/board/esteem192e/flash.c b/board/esteem192e/flash.c
index d5eb2019b..cce73fa7b 100644
--- a/board/esteem192e/flash.c
+++ b/board/esteem192e/flash.c
@@ -24,7 +24,7 @@
 #include <common.h>
 #include <mpc8xx.h>
 
-flash_info_t flash_info[CFG_MAX_FLASH_BANKS];	/* info for FLASH chips        */
+flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];	/* info for FLASH chips        */
 
 #ifdef CONFIG_FLASH_16BIT
 #define FLASH_WORD_SIZE	unsigned short
@@ -54,13 +54,13 @@ static void flash_get_offsets (ulong base, flash_info_t * info);
  */
 unsigned long flash_init (void)
 {
-	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
 	volatile memctl8xx_t *memctl = &immap->im_memctl;
 	unsigned long size_b0, size_b1;
 	int i;
 
 	/* Init: no FLASHes known */
-	for (i = 0; i < CFG_MAX_FLASH_BANKS; ++i) {
+	for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
 		flash_info[i].flash_id = FLASH_UNKNOWN;
 	}
 
@@ -91,44 +91,44 @@ unsigned long flash_init (void)
 	}
 
 	/* Remap FLASH according to real size */
-	memctl->memc_or0 = CFG_OR_TIMING_FLASH | (-size_b0 & 0xFFFF8000);
-	memctl->memc_br0 = CFG_FLASH_BASE | 0x00000801;	/*  (CFG_FLASH_BASE & BR_BA_MSK) | BR_MS_GPCM | BR_V; */
+	memctl->memc_or0 = CONFIG_SYS_OR_TIMING_FLASH | (-size_b0 & 0xFFFF8000);
+	memctl->memc_br0 = CONFIG_SYS_FLASH_BASE | 0x00000801;	/*  (CONFIG_SYS_FLASH_BASE & BR_BA_MSK) | BR_MS_GPCM | BR_V; */
 
 	/* Re-do sizing to get full correct info */
 
-	size_b0 = flash_get_size ((volatile FLASH_WORD_SIZE *) CFG_FLASH_BASE,
+	size_b0 = flash_get_size ((volatile FLASH_WORD_SIZE *) CONFIG_SYS_FLASH_BASE,
 				  &flash_info[0]);
-	flash_get_offsets (CFG_FLASH_BASE, &flash_info[0]);
+	flash_get_offsets (CONFIG_SYS_FLASH_BASE, &flash_info[0]);
 
-#if CFG_MONITOR_BASE >= CFG_FLASH_BASE
+#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE
 	/* monitor protection ON by default */
 	(void) flash_protect (FLAG_PROTECT_SET,
-			      CFG_MONITOR_BASE,
-			      CFG_MONITOR_BASE + monitor_flash_len - 1,
+			      CONFIG_SYS_MONITOR_BASE,
+			      CONFIG_SYS_MONITOR_BASE + monitor_flash_len - 1,
 			      &flash_info[0]);
 #endif
 
 	if (size_b1) {
 		memctl->memc_or1 =
-			CFG_OR_TIMING_FLASH | (-size_b1 & 0xFFFF8000);
+			CONFIG_SYS_OR_TIMING_FLASH | (-size_b1 & 0xFFFF8000);
 		memctl->memc_br1 =
-			(CFG_FLASH_BASE | 0x00000801) + (size_b0 & BR_BA_MSK);
-		/*((CFG_FLASH_BASE + size_b0) & BR_BA_MSK) |
+			(CONFIG_SYS_FLASH_BASE | 0x00000801) + (size_b0 & BR_BA_MSK);
+		/*((CONFIG_SYS_FLASH_BASE + size_b0) & BR_BA_MSK) |
 		   BR_MS_GPCM | BR_V; */
 
 		/* Re-do sizing to get full correct info */
 		size_b1 =
 			flash_get_size ((volatile FLASH_WORD_SIZE
-					 *) (CFG_FLASH_BASE + size_b0),
+					 *) (CONFIG_SYS_FLASH_BASE + size_b0),
 					&flash_info[1]);
 
-		flash_get_offsets (CFG_FLASH_BASE + size_b0, &flash_info[1]);
+		flash_get_offsets (CONFIG_SYS_FLASH_BASE + size_b0, &flash_info[1]);
 
-#if CFG_MONITOR_BASE >= CFG_FLASH_BASE
+#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE
 		/* monitor protection ON by default */
 		(void) flash_protect (FLAG_PROTECT_SET,
-				      CFG_MONITOR_BASE,
-				      CFG_MONITOR_BASE + monitor_flash_len -
+				      CONFIG_SYS_MONITOR_BASE,
+				      CONFIG_SYS_MONITOR_BASE + monitor_flash_len -
 				      1, &flash_info[1]);
 #endif
 	} else {
@@ -769,7 +769,7 @@ int flash_erase (flash_info_t * info, int s_first, int s_last)
 		addr = (volatile FLASH_WORD_SIZE *) (info->start[l_sect]);
 		while ((addr[0] & (0x00800080 & FLASH_ID_MASK)) !=
 		       (0x00800080 & FLASH_ID_MASK)) {
-			if ((now = get_timer (start)) > CFG_FLASH_ERASE_TOUT) {
+			if ((now = get_timer (start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
 				printf ("Timeout\n");
 				return 1;
 			}
@@ -1022,7 +1022,7 @@ static int write_word (flash_info_t * info, ulong dest, ulong data)
 
 		while ((*((vu_long *) dest) & 0x00800080) !=
 		       (data & 0x00800080)) {
-			if (get_timer (start) > CFG_FLASH_WRITE_TOUT) {
+			if (get_timer (start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
 				return (1);
 			}
 		}
@@ -1030,7 +1030,7 @@ static int write_word (flash_info_t * info, ulong dest, ulong data)
 	} else {
 
 		while (!(addr[0] & 0x00800080)) {	/* wait for error or finish */
-			if (get_timer (start) > CFG_FLASH_WRITE_TOUT) {
+			if (get_timer (start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
 				return (1);
 			}
 
@@ -1096,7 +1096,7 @@ static int write_short (flash_info_t * info, ulong dest, ushort data)
 	if (info->flash_id < FLASH_AMD_COMP) {
 		/* AMD stuff */
 		while ((*((vu_short *) dest) & 0x0080) != (data & 0x0080)) {
-			if (get_timer (start) > CFG_FLASH_WRITE_TOUT) {
+			if (get_timer (start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
 				return (1);
 			}
 		}
@@ -1104,7 +1104,7 @@ static int write_short (flash_info_t * info, ulong dest, ushort data)
 	} else {
 		/* intel stuff */
 		while (!(addr[0] & 0x0080)) {	/* wait for error or finish */
-			if (get_timer (start) > CFG_FLASH_WRITE_TOUT)
+			if (get_timer (start) > CONFIG_SYS_FLASH_WRITE_TOUT)
 				return (1);
 		}
 
@@ -1123,7 +1123,7 @@ static int write_short (flash_info_t * info, ulong dest, ushort data)
 		*addr = 0x00B0;
 		*addr = 0x0070;
 		while (!(addr[0] & 0x0080)) {	/* wait for error or finish */
-			if (get_timer (start) > CFG_FLASH_WRITE_TOUT)
+			if (get_timer (start) > CONFIG_SYS_FLASH_WRITE_TOUT)
 				return (1);
 		}
 		*addr = 0x00FF;
diff --git a/board/esteem192e/u-boot.lds b/board/esteem192e/u-boot.lds
index acaf4e34f..c4e17d6ee 100644
--- a/board/esteem192e/u-boot.lds
+++ b/board/esteem192e/u-boot.lds
@@ -63,7 +63,7 @@ SECTIONS
     lib_generic/zlib.o		(.text)
 
     . = env_offset;
-    common/environment.o(.text)
+    common/env_embedded.o(.text)
 
     *(.text)
     *(.fixup)
@@ -134,6 +134,7 @@ SECTIONS
    *(.dynbss)
    *(.bss)
    *(COMMON)
+   . = ALIGN(4);
   }
   _end = . ;
   PROVIDE (end = .);
diff --git a/board/etin/debris/debris.c b/board/etin/debris/debris.c
index 763760fd2..227c49a14 100644
--- a/board/etin/debris/debris.c
+++ b/board/etin/debris/debris.c
@@ -25,6 +25,7 @@
 #include <mpc824x.h>
 #include <pci.h>
 #include <i2c.h>
+#include <netdev.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -62,7 +63,7 @@ phys_size_t initdram (int board_type)
 	uint32_t mear2 = 0, emear2 = 0, msar2 = 0, emsar2 = 0;
 	uint8_t mber = 0;
 
-	i2c_init(CFG_I2C_SPEED, CFG_I2C_SLAVE);
+	i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
 
 	if (i2c_reg_read (0x50, 2) != 0x04) return 0;	/* Memory type */
 	m = i2c_reg_read (0x50, 5);	/* # of physical banks */
@@ -73,7 +74,7 @@ phys_size_t initdram (int board_type)
 	CONFIG_READ_WORD(MCCR1, mccr1);
 	mccr1 &= 0xffff0000;
 
-	start = CFG_SDRAM_BASE;
+	start = CONFIG_SYS_SDRAM_BASE;
 	end = start + (1 << (col + row + 3) ) * bank - 1;
 
 	for (i = 0; i < m; i++) {
@@ -173,7 +174,12 @@ void nvram_write(long dest, const void *src, size_t count)
 int misc_init_r(void)
 {
 	/* Write ethernet addr in NVRAM for VxWorks */
-	nvram_write(CFG_ENV_ADDR + CFG_NVRAM_VXWORKS_OFFS,
+	nvram_write(CONFIG_ENV_ADDR + CONFIG_SYS_NVRAM_VXWORKS_OFFS,
 			(char*)&gd->bd->bi_enetaddr[0], 6);
 	return 0;
 }
+
+int board_eth_init(bd_t *bis)
+{
+	return pci_eth_init(bis);
+}
diff --git a/board/etin/debris/flash.c b/board/etin/debris/flash.c
index a4100e57b..a3c813884 100644
--- a/board/etin/debris/flash.c
+++ b/board/etin/debris/flash.c
@@ -71,7 +71,7 @@ static uint16_t cfi_read_query(flash_info_t *flash, uint32_t addr)
 	return (uint16_t)read32(base + addr);
 }
 
-flash_info_t    flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
+flash_info_t    flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */
 
 static void move64(uint64_t *src, uint64_t *dest)
 {
@@ -99,7 +99,7 @@ static int cfi_write_dword(flash_info_t *flash, ulong dest, cfi_word data)
 		status &= CMD(0x80);
 		if(status == CMD(0x80))
 			break;
-		if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+		if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
 			cfi_cmd(flash, 0xff, 0);
 			return 1;
 		}
@@ -128,7 +128,7 @@ static int jedec_write_dword (flash_info_t *flash, ulong dest, cfi_word data)
 	start = get_timer (0);
 	status = ~data;
 	while(status != data) {
-		if (get_timer(start) > CFG_FLASH_WRITE_TOUT)
+		if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT)
 			return 1;
 		status = cfi_read(flash, dest);
 		udelay(1);
@@ -230,7 +230,7 @@ static int cfi_erase_oneblock(flash_info_t *flash, uint32_t sect)
 		status &= CMD(0x80);
 		if (status == CMD(0x80))
 			break;
-		if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+		if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
 			cfi_cmd(flash, 0xff, 0);
 			printf ("Timeout\n");
 			return ERR_TIMOUT;
@@ -296,7 +296,7 @@ static int jedec_erase(flash_info_t *flash, uint32_t s_first, uint32_t s_last)
 		if (status == CMD(0xffff))
 			break;
 
-		if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+		if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
 			printf ("Timeout\n");
 			return ERR_TIMOUT;
 		}
@@ -581,7 +581,7 @@ unsigned long flash_init (void)
 	mtdbat1u(0x70000000 | BATU_BL_256M | BATU_VS | BATU_VP);
 	set_msr(msr);
 
-	for (i = 0; i < CFG_MAX_FLASH_BANKS; i++)
+	for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++)
 		flash_info[i].flash_id = FLASH_UNKNOWN;
 	size = cfi_init(FLASH_BASE0_PRELIM, &flash_info[0]);
 	if (!size)
diff --git a/board/etin/debris/phantom.c b/board/etin/debris/phantom.c
index 263da6b7c..fcb4c40ea 100644
--- a/board/etin/debris/phantom.c
+++ b/board/etin/debris/phantom.c
@@ -20,7 +20,7 @@
 
 #if defined(CONFIG_CMD_DATE)
 
-#define RTC_BASE (CFG_NVRAM_BASE_ADDR + 0x7fff8)
+#define RTC_BASE (CONFIG_SYS_NVRAM_BASE_ADDR + 0x7fff8)
 
 #define RTC_YEAR                ( RTC_BASE + 7 )
 #define RTC_MONTH               ( RTC_BASE + 6 )
@@ -254,7 +254,7 @@ int rtc_get( struct rtc_time *tmp)
 	return 0;
 }
 
-void rtc_set( struct rtc_time *tmp )
+int rtc_set( struct rtc_time *tmp )
 {
 	if (phantom_flag < 0)
 		phantom_flag = get_phantom_flag();
@@ -307,6 +307,8 @@ void rtc_set( struct rtc_time *tmp )
 		/* unlock clock registers after read */
 		rtc_write( RTC_CONTROLA, ( reg_a  & ~RTC_CA_WRITE ));
 	}
+
+	return 0;
 }
 
 #endif
diff --git a/board/etin/kvme080/kvme080.c b/board/etin/kvme080/kvme080.c
index bfd6854c5..8c6afc9ca 100644
--- a/board/etin/kvme080/kvme080.c
+++ b/board/etin/kvme080/kvme080.c
@@ -25,6 +25,7 @@
 #include <mpc824x.h>
 #include <pci.h>
 #include <i2c.h>
+#include <netdev.h>
 #include <asm/processor.h>
 
 int checkboard(void)
@@ -45,7 +46,7 @@ unsigned long setdram(int m, int row, int col, int bank)
 	CONFIG_READ_WORD(MCCR1, mccr1);
 	mccr1 &= 0xffff0000;
 
-	start = CFG_SDRAM_BASE;
+	start = CONFIG_SYS_SDRAM_BASE;
 	end = start + (1 << (col + row + 3) ) * bank - 1;
 
 	for (i = 0; i < m; i++) {
@@ -100,31 +101,31 @@ phys_size_t initdram(int board_type)
 
 	msr = mfmsr();
 	mtmsr(msr & ~(MSR_IR | MSR_DR));
-	mtspr(IBAT2L, CFG_IBAT0L + 0x10000000);
-	mtspr(IBAT2U, CFG_IBAT0U + 0x10000000);
-	mtspr(DBAT2L, CFG_DBAT0L + 0x10000000);
-	mtspr(DBAT2U, CFG_DBAT0U + 0x10000000);
+	mtspr(IBAT2L, CONFIG_SYS_IBAT0L + 0x10000000);
+	mtspr(IBAT2U, CONFIG_SYS_IBAT0U + 0x10000000);
+	mtspr(DBAT2L, CONFIG_SYS_DBAT0L + 0x10000000);
+	mtspr(DBAT2U, CONFIG_SYS_DBAT0U + 0x10000000);
 	mtmsr(msr);
 
-	if (setdram(2,13,10,4) == get_ram_size(CFG_SDRAM_BASE, 0x20000000))
+	if (setdram(2,13,10,4) == get_ram_size(CONFIG_SYS_SDRAM_BASE, 0x20000000))
 		size = 0x20000000;	/* 512MB */
-	else if (setdram(1,13,10,4) == get_ram_size(CFG_SDRAM_BASE, 0x10000000))
+	else if (setdram(1,13,10,4) == get_ram_size(CONFIG_SYS_SDRAM_BASE, 0x10000000))
 		size = 0x10000000;	/* 256MB */
-	else if (setdram(2,13,9,4) == get_ram_size(CFG_SDRAM_BASE, 0x10000000))
+	else if (setdram(2,13,9,4) == get_ram_size(CONFIG_SYS_SDRAM_BASE, 0x10000000))
 		size = 0x10000000;	/* 256MB */
-	else if (setdram(1,13,9,4) == get_ram_size(CFG_SDRAM_BASE, 0x08000000))
+	else if (setdram(1,13,9,4) == get_ram_size(CONFIG_SYS_SDRAM_BASE, 0x08000000))
 		size = 0x08000000;	/* 128MB */
-	else if (setdram(2,12,9,4) == get_ram_size(CFG_SDRAM_BASE, 0x08000000))
+	else if (setdram(2,12,9,4) == get_ram_size(CONFIG_SYS_SDRAM_BASE, 0x08000000))
 		size = 0x08000000;	/* 128MB */
-	else if (setdram(1,12,9,4) == get_ram_size(CFG_SDRAM_BASE, 0x04000000))
+	else if (setdram(1,12,9,4) == get_ram_size(CONFIG_SYS_SDRAM_BASE, 0x04000000))
 		size = 0x04000000;	/* 64MB */
 
 	msr = mfmsr();
 	mtmsr(msr & ~(MSR_IR | MSR_DR));
-	mtspr(IBAT2L, CFG_IBAT2L);
-	mtspr(IBAT2U, CFG_IBAT2U);
-	mtspr(DBAT2L, CFG_DBAT2L);
-	mtspr(DBAT2U, CFG_DBAT2U);
+	mtspr(IBAT2L, CONFIG_SYS_IBAT2L);
+	mtspr(IBAT2U, CONFIG_SYS_IBAT2U);
+	mtspr(DBAT2L, CONFIG_SYS_DBAT2L);
+	mtspr(DBAT2U, CONFIG_SYS_DBAT2U);
 	mtmsr(msr);
 
 	return size;
@@ -191,3 +192,8 @@ void nvram_write(long dest, const void *src, size_t count)
 		asm volatile("sync");
 	}
 }
+
+int board_eth_init(bd_t *bis)
+{
+	return pci_eth_init(bis);
+}
diff --git a/board/etx094/etx094.c b/board/etx094/etx094.c
index 7806519e3..d6f638af6 100644
--- a/board/etx094/etx094.c
+++ b/board/etx094/etx094.c
@@ -127,7 +127,7 @@ int checkboard (void)
 
 phys_size_t initdram (int board_type)
 {
-	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
 	volatile memctl8xx_t *memctl = &immap->im_memctl;
 	long int size_b0, size_b1, size8, size9;
 
@@ -140,7 +140,7 @@ phys_size_t initdram (int board_type)
 	 * with two SDRAM banks or four cycles every 31.2 us with one
 	 * bank. It will be adjusted after memory sizing.
 	 */
-	memctl->memc_mptpr = CFG_MPTPR_1BK_4K;	/* MPTPR_PTP_DIV32 0x0200 */
+	memctl->memc_mptpr = CONFIG_SYS_MPTPR_1BK_4K;	/* MPTPR_PTP_DIV32 0x0200 */
 
 	/* A3(SDRAM)=0      => Bursttype = Sequential
 	 * A2-A0(SDRAM)=010 => Burst length = 4
@@ -153,15 +153,15 @@ phys_size_t initdram (int board_type)
 	 * preliminary addresses - these have to be modified after the
 	 * SDRAM size has been determined.
 	 */
-	memctl->memc_or2 = CFG_OR2_PRELIM;
-	memctl->memc_br2 = CFG_BR2_PRELIM;
+	memctl->memc_or2 = CONFIG_SYS_OR2_PRELIM;
+	memctl->memc_br2 = CONFIG_SYS_BR2_PRELIM;
 
 	if (board_type == 0) {	/* "L" type boards have only one bank SDRAM */
-		memctl->memc_or3 = CFG_OR3_PRELIM;
-		memctl->memc_br3 = CFG_BR3_PRELIM;
+		memctl->memc_or3 = CONFIG_SYS_OR3_PRELIM;
+		memctl->memc_br3 = CONFIG_SYS_BR3_PRELIM;
 	}
 
-	memctl->memc_mamr = CFG_MAMR_8COL & (~(MAMR_PTAE));	/* no refresh yet */
+	memctl->memc_mamr = CONFIG_SYS_MAMR_8COL & (~(MAMR_PTAE));	/* no refresh yet */
 
 	udelay (200);
 
@@ -186,7 +186,7 @@ phys_size_t initdram (int board_type)
 	 *
 	 * try 8 column mode
 	 */
-	size8 = dram_size (CFG_MAMR_8COL, (long *) SDRAM_BASE2_PRELIM,
+	size8 = dram_size (CONFIG_SYS_MAMR_8COL, (long *) SDRAM_BASE2_PRELIM,
 					   SDRAM_MAX_SIZE);
 
 	udelay (1000);
@@ -194,7 +194,7 @@ phys_size_t initdram (int board_type)
 	/*
 	 * try 9 column mode
 	 */
-	size9 = dram_size (CFG_MAMR_9COL, (long *) SDRAM_BASE2_PRELIM,
+	size9 = dram_size (CONFIG_SYS_MAMR_9COL, (long *) SDRAM_BASE2_PRELIM,
 					   SDRAM_MAX_SIZE);
 
 	if (size8 < size9) {		/* leave configuration at 9 columns */
@@ -202,7 +202,7 @@ phys_size_t initdram (int board_type)
 /*	debug ("SDRAM Bank 0 in 9 column mode: %ld MB\n", size >> 20);	*/
 	} else {					/* back to 8 columns            */
 		size_b0 = size8;
-		memctl->memc_mamr = CFG_MAMR_8COL;
+		memctl->memc_mamr = CONFIG_SYS_MAMR_8COL;
 		udelay (500);
 /*	debug ("SDRAM Bank 0 in 8 column mode: %ld MB\n", size >> 20);	*/
 	}
@@ -230,7 +230,7 @@ phys_size_t initdram (int board_type)
 	 */
 	if ((size_b0 < 0x02000000) && (size_b1 < 0x02000000)) {
 		/* reduce to 15.6 us (62.4 us / quad) */
-		memctl->memc_mptpr = CFG_MPTPR_2BK_4K;	/*DIV16 */
+		memctl->memc_mptpr = CONFIG_SYS_MPTPR_2BK_4K;	/*DIV16 */
 		udelay (1000);
 	}
 
@@ -239,18 +239,18 @@ phys_size_t initdram (int board_type)
 	 */
 	if (size_b1 > size_b0) {	/* SDRAM Bank 1 is bigger - map first   */
 
-		memctl->memc_or3 = ((-size_b1) & 0xFFFF0000) | CFG_OR_TIMING_SDRAM;
+		memctl->memc_or3 = ((-size_b1) & 0xFFFF0000) | CONFIG_SYS_OR_TIMING_SDRAM;
 		memctl->memc_br3 =
-			(CFG_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V;
+			(CONFIG_SYS_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V;
 
 		if (size_b0 > 0) {
 			/*
 			 * Position Bank 0 immediately above Bank 1
 			 */
 			memctl->memc_or2 =
-				((-size_b0) & 0xFFFF0000) | CFG_OR_TIMING_SDRAM;
+				((-size_b0) & 0xFFFF0000) | CONFIG_SYS_OR_TIMING_SDRAM;
 			memctl->memc_br2 =
-				((CFG_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V)
+				((CONFIG_SYS_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V)
 				+ size_b1;
 		} else {
 			unsigned long reg;
@@ -264,24 +264,24 @@ phys_size_t initdram (int board_type)
 
 			/* adjust refresh rate depending on SDRAM type, one bank */
 			reg = memctl->memc_mptpr;
-			reg >>= 1;	/* reduce to CFG_MPTPR_1BK_8K / _4K */
+			reg >>= 1;	/* reduce to CONFIG_SYS_MPTPR_1BK_8K / _4K */
 			memctl->memc_mptpr = reg;
 		}
 
 	} else {			/* SDRAM Bank 0 is bigger - map first   */
 
-		memctl->memc_or2 = ((-size_b0) & 0xFFFF0000) | CFG_OR_TIMING_SDRAM;
+		memctl->memc_or2 = ((-size_b0) & 0xFFFF0000) | CONFIG_SYS_OR_TIMING_SDRAM;
 		memctl->memc_br2 =
-				(CFG_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V;
+				(CONFIG_SYS_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V;
 
 		if (size_b1 > 0) {
 			/*
 			 * Position Bank 1 immediately above Bank 0
 			 */
 			memctl->memc_or3 =
-					((-size_b1) & 0xFFFF0000) | CFG_OR_TIMING_SDRAM;
+					((-size_b1) & 0xFFFF0000) | CONFIG_SYS_OR_TIMING_SDRAM;
 			memctl->memc_br3 =
-					((CFG_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V)
+					((CONFIG_SYS_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V)
 					+ size_b0;
 		} else {
 			unsigned long reg;
@@ -295,7 +295,7 @@ phys_size_t initdram (int board_type)
 
 			/* adjust refresh rate depending on SDRAM type, one bank */
 			reg = memctl->memc_mptpr;
-			reg >>= 1;	/* reduce to CFG_MPTPR_1BK_8K / _4K */
+			reg >>= 1;	/* reduce to CONFIG_SYS_MPTPR_1BK_8K / _4K */
 			memctl->memc_mptpr = reg;
 		}
 	}
@@ -318,7 +318,7 @@ phys_size_t initdram (int board_type)
 static long int dram_size (long int mamr_value, long int *base,
 						   long int maxsize)
 {
-	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
 	volatile memctl8xx_t *memctl = &immap->im_memctl;
 
 	memctl->memc_mamr = mamr_value;
@@ -343,7 +343,7 @@ void read_hw_vers ()
 	unsigned short rd_msk = 0x02A0;
 
 	/* HW-ID pin-definition */
-	volatile immap_t *immr = (immap_t *) CFG_IMMR;
+	volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
 
 	immr->im_ioport.iop_pddir &= ~(rd_msk);
 	immr->im_ioport.iop_pdpar &= ~(rd_msk);
diff --git a/board/etx094/flash.c b/board/etx094/flash.c
index 98a7c0c8d..fa51c9037 100644
--- a/board/etx094/flash.c
+++ b/board/etx094/flash.c
@@ -24,7 +24,7 @@
 #include <common.h>
 #include <mpc8xx.h>
 
-flash_info_t	flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips	*/
+flash_info_t	flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips	*/
 
 /*-----------------------------------------------------------------------
  * Functions
@@ -38,13 +38,13 @@ static void flash_get_offsets (ulong base, flash_info_t *info);
 
 unsigned long flash_init (void)
 {
-	volatile immap_t     *immap  = (immap_t *)CFG_IMMR;
+	volatile immap_t     *immap  = (immap_t *)CONFIG_SYS_IMMR;
 	volatile memctl8xx_t *memctl = &immap->im_memctl;
 	unsigned long size_b0, size_b1;
 	int i;
 
 	/* Init: no FLASHes known */
-	for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) {
+	for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
 		flash_info[i].flash_id = FLASH_UNKNOWN;
 	}
 
@@ -75,47 +75,47 @@ unsigned long flash_init (void)
 	}
 
 	/* Remap FLASH according to real size */
-	memctl->memc_or0 = CFG_OR_TIMING_FLASH | (-size_b0 & 0xFFFF8000);
+	memctl->memc_or0 = CONFIG_SYS_OR_TIMING_FLASH | (-size_b0 & 0xFFFF8000);
 #ifdef CONFIG_FLASH_16BIT
-	memctl->memc_br0 = (CFG_FLASH_BASE & BR_BA_MSK) | BR_MS_GPCM | BR_V | BR_PS_16; /* 16 Bit data port */
+	memctl->memc_br0 = (CONFIG_SYS_FLASH_BASE & BR_BA_MSK) | BR_MS_GPCM | BR_V | BR_PS_16; /* 16 Bit data port */
 #else
-	memctl->memc_br0 = (CFG_FLASH_BASE & BR_BA_MSK) | BR_MS_GPCM | BR_V;
+	memctl->memc_br0 = (CONFIG_SYS_FLASH_BASE & BR_BA_MSK) | BR_MS_GPCM | BR_V;
 #endif
 
 	/* Re-do sizing to get full correct info */
-	size_b0 = flash_get_size((vu_long *)CFG_FLASH_BASE, &flash_info[0]);
+	size_b0 = flash_get_size((vu_long *)CONFIG_SYS_FLASH_BASE, &flash_info[0]);
 
-	flash_get_offsets (CFG_FLASH_BASE, &flash_info[0]);
+	flash_get_offsets (CONFIG_SYS_FLASH_BASE, &flash_info[0]);
 
-#if CFG_MONITOR_BASE >= CFG_FLASH_BASE
+#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE
 	/* monitor protection ON by default */
 	flash_protect(FLAG_PROTECT_SET,
-		      CFG_MONITOR_BASE,
-		      CFG_MONITOR_BASE+monitor_flash_len-1,
+		      CONFIG_SYS_MONITOR_BASE,
+		      CONFIG_SYS_MONITOR_BASE+monitor_flash_len-1,
 		      &flash_info[0]);
 #endif
 
 	if (size_b1) {
-		memctl->memc_or1 = CFG_OR_TIMING_FLASH | (-size_b1 & 0xFFFF8000);
+		memctl->memc_or1 = CONFIG_SYS_OR_TIMING_FLASH | (-size_b1 & 0xFFFF8000);
 #ifdef CONFIG_FLASH_16BIT
-		memctl->memc_br1 = ((CFG_FLASH_BASE + size_b0) & BR_BA_MSK) |
+		memctl->memc_br1 = ((CONFIG_SYS_FLASH_BASE + size_b0) & BR_BA_MSK) |
 				    BR_MS_GPCM | BR_V | BR_PS_16;
 #else
-		memctl->memc_br1 = ((CFG_FLASH_BASE + size_b0) & BR_BA_MSK) |
+		memctl->memc_br1 = ((CONFIG_SYS_FLASH_BASE + size_b0) & BR_BA_MSK) |
 				    BR_MS_GPCM | BR_V;
 #endif
 
 		/* Re-do sizing to get full correct info */
-		size_b1 = flash_get_size((vu_long *)(CFG_FLASH_BASE + size_b0),
+		size_b1 = flash_get_size((vu_long *)(CONFIG_SYS_FLASH_BASE + size_b0),
 					  &flash_info[1]);
 
-		flash_get_offsets (CFG_FLASH_BASE + size_b0, &flash_info[1]);
+		flash_get_offsets (CONFIG_SYS_FLASH_BASE + size_b0, &flash_info[1]);
 
-#if CFG_MONITOR_BASE >= CFG_FLASH_BASE
+#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE
 		/* monitor protection ON by default */
 		flash_protect(FLAG_PROTECT_SET,
-			      CFG_MONITOR_BASE,
-			      CFG_MONITOR_BASE+monitor_flash_len-1,
+			      CONFIG_SYS_MONITOR_BASE,
+			      CONFIG_SYS_MONITOR_BASE+monitor_flash_len-1,
 			      &flash_info[1]);
 #endif
 	} else {
@@ -388,10 +388,10 @@ static ulong flash_get_size (vu_long *addr, flash_info_t *info)
 
 	}
 
-	if (info->sector_count > CFG_MAX_FLASH_SECT) {
+	if (info->sector_count > CONFIG_SYS_MAX_FLASH_SECT) {
 		printf ("** ERROR: sector count %d > max (%d) **\n",
-			info->sector_count, CFG_MAX_FLASH_SECT);
-		info->sector_count = CFG_MAX_FLASH_SECT;
+			info->sector_count, CONFIG_SYS_MAX_FLASH_SECT);
+		info->sector_count = CONFIG_SYS_MAX_FLASH_SECT;
 	}
 
 	if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) {
@@ -548,7 +548,7 @@ int	flash_erase (flash_info_t *info, int s_first, int s_last)
 #else
 			while ((sect_addr[0] & 0x00800080) != 0x00800080) {
 #endif
-				if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+				if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
 					printf ("Timeout\n");
 					return 1;
 				}
@@ -693,7 +693,7 @@ static int write_word (flash_info_t *info, ulong dest, ulong data)
 	/* data polling for D7 */
 	start = get_timer (0);
 	while ((*((vu_short *)dest) & 0x0080) != (high_data & 0x0080)) {
-		if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+		if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
 			return (1);
 		}
 	}
@@ -733,7 +733,7 @@ static int write_word (flash_info_t *info, ulong dest, ulong data)
 	while ((*((vu_long *)dest) & 0x00800080) != (data & 0x00800080)) {
 #endif
 
-		if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+		if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
 			return (1);
 		}
 	}
diff --git a/board/etx094/u-boot.lds b/board/etx094/u-boot.lds
index 5313bd40a..340825e81 100644
--- a/board/etx094/u-boot.lds
+++ b/board/etx094/u-boot.lds
@@ -66,7 +66,7 @@ SECTIONS
     lib_generic/zlib.o		(.text)
 
     . = env_offset;
-    common/environment.o(.text)
+    common/env_embedded.o(.text)
     *(.text)
     *(.fixup)
     *(.got1)
@@ -136,6 +136,7 @@ SECTIONS
    *(.dynbss)
    *(.bss)
    *(COMMON)
+   . = ALIGN(4);
   }
   _end = . ;
   PROVIDE (end = .);
diff --git a/board/etx094/u-boot.lds.debug b/board/etx094/u-boot.lds.debug
index 06115ead8..28f8804dc 100644
--- a/board/etx094/u-boot.lds.debug
+++ b/board/etx094/u-boot.lds.debug
@@ -68,7 +68,7 @@ SECTIONS
     lib_generic/crc32.o		(.text)
     common/dlmalloc.o	(.text)
     . = env_offset;
-    common/environment.o(.text)
+    common/env_embedded.o(.text)
 
     *(.text)
     *(.fixup)
diff --git a/board/evb4510/flash.c b/board/evb4510/flash.c
index aff92f95e..c9c6e024c 100644
--- a/board/evb4510/flash.c
+++ b/board/evb4510/flash.c
@@ -26,7 +26,7 @@
 #include <asm/hardware.h>
 #include <flash.h>
 
-flash_info_t flash_info[CFG_MAX_FLASH_BANKS];
+flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];
 
 typedef enum {
 	FLASH_DEV_U9_512KB = 0,
@@ -327,7 +327,7 @@ unsigned long flash_init (void)
 	s16 amd160 = -1;
 	u32 amd160base = 0;
 
-#if CFG_MAX_FLASH_BANKS == 2
+#if CONFIG_SYS_MAX_FLASH_BANKS == 2
 	s16 amd040 = -1;
 	u32 amd040base = 0;
 #endif
@@ -336,7 +336,7 @@ unsigned long flash_init (void)
 	if (_detectFlash (FLASH_DEV_U7_2MB, PHYS_FLASH_1, 0x1, 0x49)) {
 		amd160 = 0;
 		amd160base = PHYS_FLASH_1;
-#if CFG_MAX_FLASH_BANKS == 1
+#if CONFIG_SYS_MAX_FLASH_BANKS == 1
 	}
 #else
 		if (_detectFlash
@@ -399,9 +399,9 @@ unsigned long flash_init (void)
 		       amd160base, amd160base + monitor_flash_len - 1, info);
 
 	flash_protect (FLAG_PROTECT_SET,
-		       CFG_ENV_ADDR, CFG_ENV_ADDR + CFG_ENV_SIZE - 1, info);
+		       CONFIG_ENV_ADDR, CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1, info);
 
-#if CFG_MAX_FLASH_BANKS == 2
+#if CONFIG_SYS_MAX_FLASH_BANKS == 2
 	/* Configure AMD Am29LV040B (512KB) */
 	info = &flash_info[amd040];
 	info->flash_id = FLASH_DEV_U9_512KB;
@@ -421,7 +421,7 @@ unsigned long flash_init (void)
 #endif
 
 	return flash_info[0].size
-#if CFG_MAX_FLASH_BANKS == 2
+#if CONFIG_SYS_MAX_FLASH_BANKS == 2
 		+ flash_info[1].size
 #endif
 		;
@@ -478,7 +478,7 @@ int flash_erase (flash_info_t * info, int s_first, int s_last)
 			error = _flash_poll (info->flash_id,
 					     info->
 					     start[i] | CACHE_DISABLE_MASK,
-					     0xFF, CFG_FLASH_ERASE_TOUT);
+					     0xFF, CONFIG_SYS_FLASH_ERASE_TOUT);
 			FLASH_CMD_RESET (info->flash_id,
 					 (info->
 					  start[0] | CACHE_DISABLE_MASK));
@@ -524,7 +524,7 @@ int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
 		/*  Check if the write is done */
 		for (i = 0; i < 0xff; i++);
 		error = _flash_poll (info->flash_id, (u32) bp, *bps,
-				     CFG_FLASH_WRITE_TOUT);
+				     CONFIG_SYS_FLASH_WRITE_TOUT);
 		if (error) {
 			return error;
 		}
diff --git a/board/evb4510/u-boot.lds b/board/evb4510/u-boot.lds
index b3c2bf950..a435466d4 100644
--- a/board/evb4510/u-boot.lds
+++ b/board/evb4510/u-boot.lds
@@ -51,7 +51,7 @@ SECTIONS
 
 	. = ALIGN(4);
 	__bss_start = .;
-	.bss (NOLOAD) : { *(.bss) }
+	.bss (NOLOAD) : { *(.bss) . = ALIGN(4); }
 	_end = .;
 				  /* Stabs debugging sections.	  */
 	.stab 0 : { *(.stab) }
diff --git a/board/evb64260/bootseq.txt b/board/evb64260/bootseq.txt
index 290aed90a..e4fefb31d 100644
--- a/board/evb64260/bootseq.txt
+++ b/board/evb64260/bootseq.txt
@@ -88,7 +88,7 @@ in_flash:
 		    nothing
 		mem_malloc_init
 		malloc_bin_reloc
-		spi_init (r or f)??? (CFG_ENV_IS_IN_EEPROM)
+		spi_init (r or f)??? (CONFIG_ENV_IS_IN_EEPROM)
 		env_relocated
 		misc_init_r(bd): (board/evb64260/evb64260.c)
 		    mpsc_init2
diff --git a/board/evb64260/eth.c b/board/evb64260/eth.c
index fa5b6d4a9..ca8bab52d 100644
--- a/board/evb64260/eth.c
+++ b/board/evb64260/eth.c
@@ -27,6 +27,7 @@ Skeleton NIC driver for Etherboot
 #include <asm/cache.h>
 #include <miiphy.h>
 #include <net.h>
+#include <netdev.h>
 
 #include "eth.h"
 #include "eth_addrtbl.h"
diff --git a/board/evb64260/evb64260.c b/board/evb64260/evb64260.c
index ab599410b..80756a5cd 100644
--- a/board/evb64260/evb64260.c
+++ b/board/evb64260/evb64260.c
@@ -31,6 +31,7 @@
 #include <galileo/pci.h>
 #include <galileo/gt64260R.h>
 #include <net.h>
+#include <netdev.h>
 
 #include <asm/io.h>
 #include "eth.h"
@@ -56,7 +57,7 @@ extern void zuma_mbox_init(void);
 /* ------------------------------------------------------------------------- */
 
 /* this is the current GT register space location */
-/* it starts at CFG_DFL_GT_REGS but moves later to CFG_GT_REGS */
+/* it starts at CONFIG_SYS_DFL_GT_REGS but moves later to CONFIG_SYS_GT_REGS */
 
 /* Unfortunately, we cant change it while we are in flash, so we initialize it
  * to the "final" value. This means that any debug_led calls before
@@ -64,7 +65,7 @@ extern void zuma_mbox_init(void);
  * See also my_remap_gt_regs below. (NTL)
  */
 
-unsigned int INTERNAL_REG_BASE_ADDR = CFG_GT_REGS;
+unsigned int INTERNAL_REG_BASE_ADDR = CONFIG_SYS_GT_REGS;
 
 /* ------------------------------------------------------------------------- */
 
@@ -99,26 +100,26 @@ gt_pci_config(void)
 {
 	/* move PCI stuff out of the way - NTL */
 	/* map PCI Host 0 */
-	pciMapSpace(PCI_HOST0, PCI_REGION0, CFG_PCI0_0_MEM_SPACE,
-		CFG_PCI0_0_MEM_SPACE, CFG_PCI0_MEM_SIZE);
+	pciMapSpace(PCI_HOST0, PCI_REGION0, CONFIG_SYS_PCI0_0_MEM_SPACE,
+		CONFIG_SYS_PCI0_0_MEM_SPACE, CONFIG_SYS_PCI0_MEM_SIZE);
 
 	pciMapSpace(PCI_HOST0, PCI_REGION1, 0, 0, 0);
 	pciMapSpace(PCI_HOST0, PCI_REGION2, 0, 0, 0);
 	pciMapSpace(PCI_HOST0, PCI_REGION3, 0, 0, 0);
 
-	pciMapSpace(PCI_HOST0, PCI_IO, CFG_PCI0_IO_SPACE_PCI,
-		CFG_PCI0_IO_SPACE, CFG_PCI0_IO_SIZE);
+	pciMapSpace(PCI_HOST0, PCI_IO, CONFIG_SYS_PCI0_IO_SPACE_PCI,
+		CONFIG_SYS_PCI0_IO_SPACE, CONFIG_SYS_PCI0_IO_SIZE);
 
 	/* map PCI Host 1 */
-	pciMapSpace(PCI_HOST1, PCI_REGION0, CFG_PCI1_0_MEM_SPACE,
-		CFG_PCI1_0_MEM_SPACE, CFG_PCI1_MEM_SIZE);
+	pciMapSpace(PCI_HOST1, PCI_REGION0, CONFIG_SYS_PCI1_0_MEM_SPACE,
+		CONFIG_SYS_PCI1_0_MEM_SPACE, CONFIG_SYS_PCI1_MEM_SIZE);
 
 	pciMapSpace(PCI_HOST1, PCI_REGION1, 0, 0, 0);
 	pciMapSpace(PCI_HOST1, PCI_REGION2, 0, 0, 0);
 	pciMapSpace(PCI_HOST1, PCI_REGION3, 0, 0, 0);
 
-	pciMapSpace(PCI_HOST1, PCI_IO, CFG_PCI1_IO_SPACE_PCI,
-		CFG_PCI1_IO_SPACE, CFG_PCI1_IO_SIZE);
+	pciMapSpace(PCI_HOST1, PCI_IO, CONFIG_SYS_PCI1_IO_SPACE_PCI,
+		CONFIG_SYS_PCI1_IO_SPACE, CONFIG_SYS_PCI1_IO_SIZE);
 
 	/* PCI interface settings */
 	GT_REG_WRITE(PCI_0TIMEOUT_RETRY, 0xffff);
@@ -200,7 +201,7 @@ int board_early_init_f (void)
 	 * that if it's not at the power-on location, it's where we put
 	 * it last time. (huber)
 	 */
-	my_remap_gt_regs(CFG_DFL_GT_REGS, CFG_GT_REGS);
+	my_remap_gt_regs(CONFIG_SYS_DFL_GT_REGS, CONFIG_SYS_GT_REGS);
 
 	gt_pci_config();
 
@@ -217,7 +218,7 @@ int board_early_init_f (void)
 	GT_REG_WRITE(CPU_INT_3_MASK, 0);
 
 	/* now, onto the configuration */
-	GT_REG_WRITE(SDRAM_CONFIGURATION, CFG_SDRAM_CONFIG);
+	GT_REG_WRITE(SDRAM_CONFIGURATION, CONFIG_SYS_SDRAM_CONFIG);
 
 	/* ----- DEVICE BUS SETTINGS ------ */
 
@@ -244,62 +245,61 @@ int board_early_init_f (void)
 	/* Zuma has no SRAM */
 	sram_boot = 0;
 #else
-	if (memoryGetDeviceBaseAddress(DEVICE0) && 0xfff00000 == CFG_MONITOR_BASE)
+	if (memoryGetDeviceBaseAddress(DEVICE0) && 0xfff00000 == CONFIG_SYS_MONITOR_BASE)
 		sram_boot = 1;
 #endif
 
-	if (!sram_boot)
-		memoryMapDeviceSpace(DEVICE0, CFG_DEV0_SPACE, CFG_DEV0_SIZE);
+		memoryMapDeviceSpace(DEVICE0, CONFIG_SYS_DEV0_SPACE, CONFIG_SYS_DEV0_SIZE);
 
-	memoryMapDeviceSpace(DEVICE1, CFG_DEV1_SPACE, CFG_DEV1_SIZE);
-	memoryMapDeviceSpace(DEVICE2, CFG_DEV2_SPACE, CFG_DEV2_SIZE);
-	memoryMapDeviceSpace(DEVICE3, CFG_DEV3_SPACE, CFG_DEV3_SIZE);
+	memoryMapDeviceSpace(DEVICE1, CONFIG_SYS_DEV1_SPACE, CONFIG_SYS_DEV1_SIZE);
+	memoryMapDeviceSpace(DEVICE2, CONFIG_SYS_DEV2_SPACE, CONFIG_SYS_DEV2_SIZE);
+	memoryMapDeviceSpace(DEVICE3, CONFIG_SYS_DEV3_SPACE, CONFIG_SYS_DEV3_SIZE);
 
 	/* configure device timing */
-#ifdef CFG_DEV0_PAR
+#ifdef CONFIG_SYS_DEV0_PAR
 	if (!sram_boot)
-		GT_REG_WRITE(DEVICE_BANK0PARAMETERS, CFG_DEV0_PAR);
+		GT_REG_WRITE(DEVICE_BANK0PARAMETERS, CONFIG_SYS_DEV0_PAR);
 #endif
 
-#ifdef CFG_DEV1_PAR
-	GT_REG_WRITE(DEVICE_BANK1PARAMETERS, CFG_DEV1_PAR);
+#ifdef CONFIG_SYS_DEV1_PAR
+	GT_REG_WRITE(DEVICE_BANK1PARAMETERS, CONFIG_SYS_DEV1_PAR);
 #endif
-#ifdef CFG_DEV2_PAR
-	GT_REG_WRITE(DEVICE_BANK2PARAMETERS, CFG_DEV2_PAR);
+#ifdef CONFIG_SYS_DEV2_PAR
+	GT_REG_WRITE(DEVICE_BANK2PARAMETERS, CONFIG_SYS_DEV2_PAR);
 #endif
 
 #ifdef CONFIG_EVB64260
-#ifdef CFG_32BIT_BOOT_PAR
+#ifdef CONFIG_SYS_32BIT_BOOT_PAR
 	/* detect if we are booting from the 32 bit flash */
 	if (GTREGREAD(DEVICE_BOOT_BANK_PARAMETERS) & (0x3 << 20)) {
 		/* 32 bit boot flash */
-		GT_REG_WRITE(DEVICE_BANK3PARAMETERS, CFG_8BIT_BOOT_PAR);
-		GT_REG_WRITE(DEVICE_BOOT_BANK_PARAMETERS, CFG_32BIT_BOOT_PAR);
+		GT_REG_WRITE(DEVICE_BANK3PARAMETERS, CONFIG_SYS_8BIT_BOOT_PAR);
+		GT_REG_WRITE(DEVICE_BOOT_BANK_PARAMETERS, CONFIG_SYS_32BIT_BOOT_PAR);
 	} else {
 		/* 8 bit boot flash */
-		GT_REG_WRITE(DEVICE_BANK3PARAMETERS, CFG_32BIT_BOOT_PAR);
-		GT_REG_WRITE(DEVICE_BOOT_BANK_PARAMETERS, CFG_8BIT_BOOT_PAR);
+		GT_REG_WRITE(DEVICE_BANK3PARAMETERS, CONFIG_SYS_32BIT_BOOT_PAR);
+		GT_REG_WRITE(DEVICE_BOOT_BANK_PARAMETERS, CONFIG_SYS_8BIT_BOOT_PAR);
 	}
 #else
 	/* 8 bit boot flash only */
-	GT_REG_WRITE(DEVICE_BOOT_BANK_PARAMETERS, CFG_8BIT_BOOT_PAR);
+	GT_REG_WRITE(DEVICE_BOOT_BANK_PARAMETERS, CONFIG_SYS_8BIT_BOOT_PAR);
 #endif
 #else /* CONFIG_EVB64260 not defined */
 		/* We are booting from 16-bit flash.
 		 */
-	GT_REG_WRITE(DEVICE_BOOT_BANK_PARAMETERS, CFG_16BIT_BOOT_PAR);
+	GT_REG_WRITE(DEVICE_BOOT_BANK_PARAMETERS, CONFIG_SYS_16BIT_BOOT_PAR);
 #endif
 
 	gt_cpu_config();
 
 	/* MPP setup */
-	GT_REG_WRITE(MPP_CONTROL0, CFG_MPP_CONTROL_0);
-	GT_REG_WRITE(MPP_CONTROL1, CFG_MPP_CONTROL_1);
-	GT_REG_WRITE(MPP_CONTROL2, CFG_MPP_CONTROL_2);
-	GT_REG_WRITE(MPP_CONTROL3, CFG_MPP_CONTROL_3);
+	GT_REG_WRITE(MPP_CONTROL0, CONFIG_SYS_MPP_CONTROL_0);
+	GT_REG_WRITE(MPP_CONTROL1, CONFIG_SYS_MPP_CONTROL_1);
+	GT_REG_WRITE(MPP_CONTROL2, CONFIG_SYS_MPP_CONTROL_2);
+	GT_REG_WRITE(MPP_CONTROL3, CONFIG_SYS_MPP_CONTROL_3);
 
-	GT_REG_WRITE(GPP_LEVEL_CONTROL, CFG_GPP_LEVEL_CONTROL);
-	GT_REG_WRITE(SERIAL_PORT_MULTIPLEX, CFG_SERIAL_PORT_MUX);
+	GT_REG_WRITE(GPP_LEVEL_CONTROL, CONFIG_SYS_GPP_LEVEL_CONTROL);
+	GT_REG_WRITE(SERIAL_PORT_MULTIPLEX, CONFIG_SYS_SERIAL_PORT_MUX);
 
 	return 0;
 }
@@ -309,7 +309,7 @@ int board_early_init_f (void)
 int misc_init_r (void)
 {
 	icache_enable();
-#ifdef CFG_L2
+#ifdef CONFIG_SYS_L2
 	l2cache_enable();
 #endif
 
@@ -330,9 +330,9 @@ after_reloc(ulong dest_addr)
 	 * back to the way they should be. (we're running from main
 	 * memory at this point now */
 
-	if (memoryGetDeviceBaseAddress(DEVICE0) == CFG_MONITOR_BASE) {
-		memoryMapDeviceSpace(DEVICE0, CFG_DEV0_SPACE, CFG_DEV0_SIZE);
-		memoryMapDeviceSpace(BOOT_DEVICE, CFG_FLASH_BASE, _1M);
+	if (memoryGetDeviceBaseAddress(DEVICE0) == CONFIG_SYS_MONITOR_BASE) {
+		memoryMapDeviceSpace(DEVICE0, CONFIG_SYS_DEV0_SPACE, CONFIG_SYS_DEV0_SIZE);
+		memoryMapDeviceSpace(BOOT_DEVICE, CONFIG_SYS_FLASH_BASE, _1M);
 	}
 
 	/* now, jump to the main U-Boot board init code */
@@ -350,7 +350,7 @@ after_reloc(ulong dest_addr)
 int
 checkboard (void)
 {
-	puts ("Board: " CFG_BOARD_NAME "\n");
+	puts ("Board: " CONFIG_SYS_BOARD_NAME "\n");
 	return (0);
 }
 
@@ -365,29 +365,29 @@ debug_led(int led, int mode)
 	if (mode == 1) {
 		switch (led) {
 		case 0:
-			addr = (int *)((unsigned int)CFG_DEV1_SPACE | 0x08000);
+			addr = (int *)((unsigned int)CONFIG_SYS_DEV1_SPACE | 0x08000);
 			break;
 
 		case 1:
-			addr = (int *)((unsigned int)CFG_DEV1_SPACE | 0x0c000);
+			addr = (int *)((unsigned int)CONFIG_SYS_DEV1_SPACE | 0x0c000);
 			break;
 
 		case 2:
-			addr = (int *)((unsigned int)CFG_DEV1_SPACE | 0x10000);
+			addr = (int *)((unsigned int)CONFIG_SYS_DEV1_SPACE | 0x10000);
 			break;
 		}
 	} else if (mode == 0) {
 		switch (led) {
 		case 0:
-			addr = (int *)((unsigned int)CFG_DEV1_SPACE | 0x14000);
+			addr = (int *)((unsigned int)CONFIG_SYS_DEV1_SPACE | 0x14000);
 			break;
 
 		case 1:
-			addr = (int *)((unsigned int)CFG_DEV1_SPACE | 0x18000);
+			addr = (int *)((unsigned int)CONFIG_SYS_DEV1_SPACE | 0x18000);
 			break;
 
 		case 2:
-			addr = (int *)((unsigned int)CFG_DEV1_SPACE | 0x1c000);
+			addr = (int *)((unsigned int)CONFIG_SYS_DEV1_SPACE | 0x1c000);
 			break;
 		}
 	}
@@ -443,3 +443,9 @@ display_mem_map(void)
     printf(" BOOT:  base - 0x%08x\tsize - %dM bytes\twidth - %d bits\n",
 	   base, size>>20, width);
 }
+
+int board_eth_init(bd_t *bis)
+{
+	gt6426x_eth_initialize(bis);
+	return 0;
+}
diff --git a/board/evb64260/flash.c b/board/evb64260/flash.c
index 6ab23dce2..115e8cd4d 100644
--- a/board/evb64260/flash.c
+++ b/board/evb64260/flash.c
@@ -46,7 +46,7 @@
 int flash_erase_intel(flash_info_t *info, int s_first, int s_last);
 int write_word_intel(bank_addr_t addr, bank_word_t value);
 
-flash_info_t	flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
+flash_info_t	flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */
 
 /*-----------------------------------------------------------------------
  * Functions
@@ -67,16 +67,16 @@ flash_init (void)
 	unsigned long base, flash_size;
 
 	/* Init: no FLASHes known */
-	for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) {
+	for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
 		flash_info[i].flash_id = FLASH_UNKNOWN;
 	}
 
 	/* the boot flash */
-	base = CFG_FLASH_BASE;
-#ifndef CFG_BOOT_FLASH_WIDTH
-#define CFG_BOOT_FLASH_WIDTH	1
+	base = CONFIG_SYS_FLASH_BASE;
+#ifndef CONFIG_SYS_BOOT_FLASH_WIDTH
+#define CONFIG_SYS_BOOT_FLASH_WIDTH	1
 #endif
-	size_b0 = flash_get_size(CFG_BOOT_FLASH_WIDTH, (vu_long *)base,
+	size_b0 = flash_get_size(CONFIG_SYS_BOOT_FLASH_WIDTH, (vu_long *)base,
 	                         &flash_info[0]);
 
 #ifndef CONFIG_P3G4
@@ -90,9 +90,9 @@ flash_init (void)
 			base, size_b0, size_b0<<20);
 	}
 
-	base = memoryGetDeviceBaseAddress(CFG_EXTRA_FLASH_DEVICE);
-	for(i=1;i<CFG_MAX_FLASH_BANKS;i++) {
-	    unsigned long size = flash_get_size(CFG_EXTRA_FLASH_WIDTH, (vu_long *)base, &flash_info[i]);
+	base = memoryGetDeviceBaseAddress(CONFIG_SYS_EXTRA_FLASH_DEVICE);
+	for(i=1;i<CONFIG_SYS_MAX_FLASH_BANKS;i++) {
+	    unsigned long size = flash_get_size(CONFIG_SYS_EXTRA_FLASH_WIDTH, (vu_long *)base, &flash_info[i]);
 
 #ifndef CONFIG_P3G4
 	    printf("[");
@@ -111,20 +111,20 @@ flash_init (void)
 	    base+=size;
 	}
 
-#if CFG_MONITOR_BASE >= CFG_FLASH_BASE
+#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE
 	/* monitor protection ON by default */
 	flash_protect(FLAG_PROTECT_SET,
-	              CFG_MONITOR_BASE,
-	              CFG_MONITOR_BASE + monitor_flash_len - 1,
-	              flash_get_info(CFG_MONITOR_BASE));
+	              CONFIG_SYS_MONITOR_BASE,
+	              CONFIG_SYS_MONITOR_BASE + monitor_flash_len - 1,
+	              flash_get_info(CONFIG_SYS_MONITOR_BASE));
 #endif
 
-#ifdef  CFG_ENV_IS_IN_FLASH
+#ifdef  CONFIG_ENV_IS_IN_FLASH
 	/* ENV protection ON by default */
 	flash_protect(FLAG_PROTECT_SET,
-	              CFG_ENV_ADDR,
-	              CFG_ENV_ADDR + CFG_ENV_SIZE - 1,
-	              flash_get_info(CFG_ENV_ADDR));
+	              CONFIG_ENV_ADDR,
+	              CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1,
+	              flash_get_info(CONFIG_ENV_ADDR));
 #endif
 
 	flash_size = size_b0 + size_b1;
@@ -183,13 +183,13 @@ static flash_info_t *flash_get_info(ulong base)
 	int i;
 	flash_info_t * info;
 
-	for (i = 0; i < CFG_MAX_FLASH_BANKS; i ++) {
+	for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i ++) {
 		info = & flash_info[i];
 		if (info->start[0] <= base && base <= info->start[0] + info->size - 1)
 			break;
 	}
 
-	return i == CFG_MAX_FLASH_BANKS ? 0 : info;
+	return i == CONFIG_SYS_MAX_FLASH_BANKS ? 0 : info;
 }
 
 /*-----------------------------------------------------------------------
@@ -682,7 +682,7 @@ flash_erase (flash_info_t *info, int s_first, int s_last)
 	addr = (volatile unsigned char *)(info->start[l_sect]);
 	/* broken for 2x16: TODO */
 	while ((addr[0] & 0x80) != 0x80) {
-		if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+		if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
 			printf ("Timeout\n");
 			return 1;
 		}
@@ -846,7 +846,7 @@ write_word (flash_info_t *info, ulong dest, ulong data)
 	/* data polling for D7 */
 	start = get_timer (0);
 	while ((*((vu_long *)dest) & 0x00800080) != (data & 0x00800080)) {
-		if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+		if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
 			return (1);
 		}
 	}
diff --git a/board/evb64260/intel_flash.c b/board/evb64260/intel_flash.c
index ed6a2a029..994264a7a 100644
--- a/board/evb64260/intel_flash.c
+++ b/board/evb64260/intel_flash.c
@@ -157,7 +157,7 @@ write_word_intel(bank_addr_t addr, bank_word_t value)
 	/* data polling for D7 */
 	start = get_timer (0);
 	do {
-		if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+		if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
 			retval = 1;
 			goto done;
 		}
@@ -234,7 +234,7 @@ flash_erase_intel(flash_info_t *info, int s_first, int s_last)
 			do {
 				now = get_timer(start);
 
-				if (now - estart > CFG_FLASH_ERASE_TOUT) {
+				if (now - estart > CONFIG_SYS_FLASH_ERASE_TOUT) {
 					printf ("Timeout (sect %d)\n", sect);
 					haderr = 1;
 					break;
diff --git a/board/evb64260/intel_flash.h b/board/evb64260/intel_flash.h
index dc2aa0008..cc3a33965 100644
--- a/board/evb64260/intel_flash.h
+++ b/board/evb64260/intel_flash.h
@@ -42,7 +42,7 @@
 /* ID and Lock Configuration */
 #define CHIP_RD_ID_LOCK		0x01		/* Bit 0 of each byte */
 #define CHIP_RD_ID_MAN		0x89		/* Manufacturer code = 0x89 */
-#define CHIP_RD_ID_DEV		CFG_FLASH_ID
+#define CHIP_RD_ID_DEV		CONFIG_SYS_FLASH_ID
 
 /* dimensions */
 #define CHIP_WIDTH		2		/* chips are in 16 bit mode */
diff --git a/board/evb64260/local.h b/board/evb64260/local.h
index 3d9b443e7..8a3f4b294 100644
--- a/board/evb64260/local.h
+++ b/board/evb64260/local.h
@@ -26,7 +26,7 @@
 /* #define CONFIG_BOOTCOMMAND */
 /* #define CONFIG_RAMBOOTCOMMAND */
 /* #define CONFIG_NFSBOOTCOMMAND */
-/* #define CFG_AUTOLOAD */
+/* #define CONFIG_SYS_AUTOLOAD */
 /* #define CONFIG_PREBOOT */
 
 /* These don't */
diff --git a/board/evb64260/misc.S b/board/evb64260/misc.S
index 438dea612..f09528d42 100644
--- a/board/evb64260/misc.S
+++ b/board/evb64260/misc.S
@@ -16,7 +16,7 @@
 board_relocate_rom:
 	mflr	r7
 	/* update the location of the GT registers */
-	lis	r11, CFG_GT_REGS@h
+	lis	r11, CONFIG_SYS_GT_REGS@h
 	/* if we're using ECC, we must use the DMA engine to copy ourselves */
 	bl	start_idma_transfer_0
 	bl	wait_for_idma_0
@@ -29,12 +29,12 @@ board_relocate_rom:
 board_init_ecc:
 	mflr	r7
 	/* NOTE: r10 still contains the location we've been relocated to
-	 * which happens to be TOP_OF_RAM - CFG_MONITOR_LEN */
+	 * which happens to be TOP_OF_RAM - CONFIG_SYS_MONITOR_LEN */
 
 	/* now that we're running from ram, init the rest of main memory
 	 * for ECC use */
-	lis	r8, CFG_MONITOR_LEN@h
-	ori	r8, r8, CFG_MONITOR_LEN@l
+	lis	r8, CONFIG_SYS_MONITOR_LEN@h
+	ori	r8, r8, CONFIG_SYS_MONITOR_LEN@l
 
 	divw	r3, r10, r8
 
@@ -120,15 +120,15 @@ stop_idma_engine_0:
 	blr
 #endif
 
-#ifdef CFG_BOARD_ASM_INIT
+#ifdef CONFIG_SYS_BOARD_ASM_INIT
 	/* NOTE: trashes r3-r7 */
 	.globl board_asm_init
 board_asm_init:
 	/* just move the GT registers to where they belong */
-	lis	r3, CFG_DFL_GT_REGS@h
-	ori	r3, r3, CFG_DFL_GT_REGS@l
-	lis	r4, CFG_GT_REGS@h
-	ori	r4, r4, CFG_GT_REGS@l
+	lis	r3, CONFIG_SYS_DFL_GT_REGS@h
+	ori	r3, r3, CONFIG_SYS_DFL_GT_REGS@l
+	lis	r4, CONFIG_SYS_GT_REGS@h
+	ori	r4, r4, CONFIG_SYS_GT_REGS@l
 	li	r5, INTERNAL_SPACE_DECODE
 
 	/* test to see if we've already moved */
diff --git a/board/evb64260/mpsc.c b/board/evb64260/mpsc.c
index 3b338c72e..8c4a4c899 100644
--- a/board/evb64260/mpsc.c
+++ b/board/evb64260/mpsc.c
@@ -390,7 +390,7 @@ galbrg_set_baudrate(int channel, int rate)
 
 #if defined(CONFIG_ZUMA_V2) || defined(CONFIG_P3G4)
 	/* from tclk */
-	clock = (CFG_BUS_HZ/(16*rate)) - 1;
+	clock = (CONFIG_SYS_BUS_HZ/(16*rate)) - 1;
 #else
 	clock = (3686400/(16*rate)) - 1;
 #endif
diff --git a/board/evb64260/pci.c b/board/evb64260/pci.c
index 59b9acb2f..582f24c67 100644
--- a/board/evb64260/pci.c
+++ b/board/evb64260/pci.c
@@ -675,14 +675,14 @@ void pci_init_board (void)
 	local_buses[0] = pci0_hose.first_busno;
 	/* PCI memory space */
 	pci_set_region (pci0_hose.regions + 0,
-			CFG_PCI0_0_MEM_SPACE,
-			CFG_PCI0_0_MEM_SPACE,
-			CFG_PCI0_MEM_SIZE, PCI_REGION_MEM);
+			CONFIG_SYS_PCI0_0_MEM_SPACE,
+			CONFIG_SYS_PCI0_0_MEM_SPACE,
+			CONFIG_SYS_PCI0_MEM_SIZE, PCI_REGION_MEM);
 
 	/* PCI I/O space */
 	pci_set_region (pci0_hose.regions + 1,
-			CFG_PCI0_IO_SPACE_PCI,
-			CFG_PCI0_IO_SPACE, CFG_PCI0_IO_SIZE, PCI_REGION_IO);
+			CONFIG_SYS_PCI0_IO_SPACE_PCI,
+			CONFIG_SYS_PCI0_IO_SPACE, CONFIG_SYS_PCI0_IO_SIZE, PCI_REGION_IO);
 
 	pci_set_ops (&pci0_hose,
 		     pci_hose_read_config_byte_via_dword,
@@ -720,14 +720,14 @@ void pci_init_board (void)
 
 	/* PCI memory space */
 	pci_set_region (pci1_hose.regions + 0,
-			CFG_PCI1_0_MEM_SPACE,
-			CFG_PCI1_0_MEM_SPACE,
-			CFG_PCI1_MEM_SIZE, PCI_REGION_MEM);
+			CONFIG_SYS_PCI1_0_MEM_SPACE,
+			CONFIG_SYS_PCI1_0_MEM_SPACE,
+			CONFIG_SYS_PCI1_MEM_SIZE, PCI_REGION_MEM);
 
 	/* PCI I/O space */
 	pci_set_region (pci1_hose.regions + 1,
-			CFG_PCI1_IO_SPACE_PCI,
-			CFG_PCI1_IO_SPACE, CFG_PCI1_IO_SIZE, PCI_REGION_IO);
+			CONFIG_SYS_PCI1_IO_SPACE_PCI,
+			CONFIG_SYS_PCI1_IO_SPACE, CONFIG_SYS_PCI1_IO_SIZE, PCI_REGION_IO);
 
 	pci_set_ops (&pci1_hose,
 		     pci_hose_read_config_byte_via_dword,
diff --git a/board/evb64260/sdram_init.c b/board/evb64260/sdram_init.c
index 9ae446544..e2f07699c 100644
--- a/board/evb64260/sdram_init.c
+++ b/board/evb64260/sdram_init.c
@@ -300,7 +300,7 @@ static int check_dimm (uchar slot, sdram_info_t * info)
 
 	DP (printf ("tpar set to: %d\n", info->tpar));
 
-#ifdef CFG_BROKEN_CL2
+#ifdef CONFIG_SYS_BROKEN_CL2
 	if (info->tpar == 2) {
 		info->tpar = 3;
 		DP (printf ("tpar fixed-up to: %d\n", info->tpar));
@@ -598,7 +598,7 @@ phys_size_t initdram (int board_type)
 	 *         limitation: we only support 256M per bank due to
 	 *         us only having 1 BAT for all DRAM
 	 */
-	for (bank_no = 0; bank_no < CFG_DRAM_BANKS; bank_no++) {
+	for (bank_no = 0; bank_no < CONFIG_SYS_DRAM_BANKS; bank_no++) {
 		/* skip over banks that are not populated */
 		if (!checkbank[bank_no])
 			continue;
@@ -617,7 +617,7 @@ phys_size_t initdram (int board_type)
 	 *         space.
 	 */
 	dimm_info[0].banks = dimm_info[1].banks = 0;
-	for (bank_no = 0; bank_no < CFG_DRAM_BANKS; bank_no++) {
+	for (bank_no = 0; bank_no < CONFIG_SYS_DRAM_BANKS; bank_no++) {
 		if (!checkbank[bank_no])
 			continue;
 
diff --git a/board/evb64260/serial.c b/board/evb64260/serial.c
index f1bcab3f0..9d711151f 100644
--- a/board/evb64260/serial.c
+++ b/board/evb64260/serial.c
@@ -31,7 +31,7 @@
 #include <command.h>
 #include <galileo/memory.h>
 
-#if (defined CFG_INIT_CHAN1) || (defined CFG_INIT_CHAN2)
+#if (defined CONFIG_SYS_INIT_CHAN1) || (defined CONFIG_SYS_INIT_CHAN2)
 #include <ns16550.h>
 #endif
 
@@ -41,26 +41,26 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
-#if (defined CFG_INIT_CHAN1) || (defined CFG_INIT_CHAN2)
-const NS16550_t COM_PORTS[] = { (NS16550_t) CFG_NS16550_COM1,
-				(NS16550_t) CFG_NS16550_COM2 };
+#if (defined CONFIG_SYS_INIT_CHAN1) || (defined CONFIG_SYS_INIT_CHAN2)
+const NS16550_t COM_PORTS[] = { (NS16550_t) CONFIG_SYS_NS16550_COM1,
+				(NS16550_t) CONFIG_SYS_NS16550_COM2 };
 #endif
 
 #ifdef CONFIG_MPSC
 
 int serial_init (void)
 {
-#if (defined CFG_INIT_CHAN1) || (defined CFG_INIT_CHAN2)
-	int clock_divisor = CFG_NS16550_CLK / 16 / gd->baudrate;
+#if (defined CONFIG_SYS_INIT_CHAN1) || (defined CONFIG_SYS_INIT_CHAN2)
+	int clock_divisor = CONFIG_SYS_NS16550_CLK / 16 / gd->baudrate;
 #endif
 
 	mpsc_init(gd->baudrate);
 
 	/* init the DUART chans so that KGDB in the kernel can use them */
-#ifdef CFG_INIT_CHAN1
+#ifdef CONFIG_SYS_INIT_CHAN1
 	NS16550_reinit(COM_PORTS[0], clock_divisor);
 #endif
-#ifdef CFG_INIT_CHAN2
+#ifdef CONFIG_SYS_INIT_CHAN2
 	NS16550_reinit(COM_PORTS[1], clock_divisor);
 #endif
 	return (0);
@@ -97,12 +97,12 @@ serial_setbrg (void)
 
 int serial_init (void)
 {
-	int clock_divisor = CFG_NS16550_CLK / 16 / gd->baudrate;
+	int clock_divisor = CONFIG_SYS_NS16550_CLK / 16 / gd->baudrate;
 
-#ifdef CFG_INIT_CHAN1
+#ifdef CONFIG_SYS_INIT_CHAN1
 	(void)NS16550_init(COM_PORTS[0], clock_divisor);
 #endif
-#ifdef CFG_INIT_CHAN2
+#ifdef CONFIG_SYS_INIT_CHAN2
 	(void)NS16550_init(COM_PORTS[1], clock_divisor);
 #endif
 
@@ -113,32 +113,32 @@ void
 serial_putc(const char c)
 {
 	if (c == '\n')
-		NS16550_putc(COM_PORTS[CFG_DUART_CHAN], '\r');
+		NS16550_putc(COM_PORTS[CONFIG_SYS_DUART_CHAN], '\r');
 
-	NS16550_putc(COM_PORTS[CFG_DUART_CHAN], c);
+	NS16550_putc(COM_PORTS[CONFIG_SYS_DUART_CHAN], c);
 }
 
 int
 serial_getc(void)
 {
-	return NS16550_getc(COM_PORTS[CFG_DUART_CHAN]);
+	return NS16550_getc(COM_PORTS[CONFIG_SYS_DUART_CHAN]);
 }
 
 int
 serial_tstc(void)
 {
-	return NS16550_tstc(COM_PORTS[CFG_DUART_CHAN]);
+	return NS16550_tstc(COM_PORTS[CONFIG_SYS_DUART_CHAN]);
 }
 
 void
 serial_setbrg (void)
 {
-	int clock_divisor = CFG_NS16550_CLK / 16 / gd->baudrate;
+	int clock_divisor = CONFIG_SYS_NS16550_CLK / 16 / gd->baudrate;
 
-#ifdef CFG_INIT_CHAN1
+#ifdef CONFIG_SYS_INIT_CHAN1
 	NS16550_reinit(COM_PORTS[0], clock_divisor);
 #endif
-#ifdef CFG_INIT_CHAN2
+#ifdef CONFIG_SYS_INIT_CHAN2
 	NS16550_reinit(COM_PORTS[1], clock_divisor);
 #endif
 }
diff --git a/board/evb64260/u-boot.lds b/board/evb64260/u-boot.lds
index 1a95755ab..ff2d8b7fe 100644
--- a/board/evb64260/u-boot.lds
+++ b/board/evb64260/u-boot.lds
@@ -60,7 +60,7 @@ SECTIONS
 
 /* store the environment in a seperate sector in the boot flash */
 /*    . = env_offset; */
-/*    common/environment.o(.text) */
+/*    common/env_embedded.o(.text) */
 
     *(.text)
     *(.fixup)
@@ -131,6 +131,7 @@ SECTIONS
    *(.dynbss)
    *(.bss)
    *(COMMON)
+   . = ALIGN(4);
   }
   _end = . ;
   PROVIDE (end = .);
diff --git a/board/evb64260/zuma_pbb.c b/board/evb64260/zuma_pbb.c
index 296e4619c..1d0357093 100644
--- a/board/evb64260/zuma_pbb.c
+++ b/board/evb64260/zuma_pbb.c
@@ -149,8 +149,10 @@ void zuma_init_pbb (void)
 
 	pci_read_config_dword (dev, PCI_BASE_ADDRESS_0, &iobase);
 
-	zuma_pbb_reg =
-			(PBB_DMA_REG_MAP *) (iobase & PCI_BASE_ADDRESS_MEM_MASK);
+	iobase &= PCI_BASE_ADDRESS_MEM_MASK;
+
+	zuma_pbb_reg = (PBB_DMA_REG_MAP *)iobase;
+
 
 	if (!zuma_pbb_reg) {
 		printf ("zuma pbb bar none! (hah hah, get it?)\n");
diff --git a/board/evb64260/zuma_pbb_mbox.c b/board/evb64260/zuma_pbb_mbox.c
index 6f5df6e80..8e381024b 100644
--- a/board/evb64260/zuma_pbb_mbox.c
+++ b/board/evb64260/zuma_pbb_mbox.c
@@ -165,7 +165,9 @@ int zuma_mbox_init(void)
 
   pci_read_config_dword(zuma_mbox_dev.dev, PCI_BASE_ADDRESS_0, &iobase);
 
-  zuma_mbox_dev.sip = (PBB_DMA_REG_MAP *) (iobase & PCI_BASE_ADDRESS_MEM_MASK);
+  iobase &= PCI_BASE_ADDRESS_MEM_MASK;
+
+  zuma_mbox_dev.sip = (PBB_DMA_REG_MAP *)iobase;
 
   zuma_mbox_dev.sip->int_mask.word=0;
 
diff --git a/board/exbitgen/flash.c b/board/exbitgen/flash.c
index 4dd538287..cd45cb697 100644
--- a/board/exbitgen/flash.c
+++ b/board/exbitgen/flash.c
@@ -33,7 +33,7 @@
 #include <asm/processor.h>
 #include <ppc4xx.h>
 
-flash_info_t	flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips	*/
+flash_info_t	flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips	*/
 
 /*-----------------------------------------------------------------------
  * Functions
@@ -68,7 +68,7 @@ unsigned long flash_init (void)
 	int i;
 
 	/* Init: no FLASHes known */
-	for (i = 0; i < CFG_MAX_FLASH_BANKS; ++i) {
+	for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
 		flash_info[i].flash_id = FLASH_UNKNOWN;
 		flash_info[i].size = 0;
 	}
@@ -76,7 +76,7 @@ unsigned long flash_init (void)
 	tot_size = 0;
 
 	/* Detect Boot Flash */
-	bank_addr = CFG_FLASH0_BASE;
+	bank_addr = CONFIG_SYS_FLASH0_BASE;
 	bank_size = flash_get_size((vu_long *)bank_addr, &flash_info[0]);
 	if (bank_size > 0) {
 		(void)flash_protect(FLAG_PROTECT_CLEAR,
@@ -91,8 +91,8 @@ unsigned long flash_init (void)
 	tot_size += bank_size;
 
 	/* Detect Application Flash */
-	bank_addr = CFG_FLASH1_BASE;
-	for (i = 1; i < CFG_MAX_FLASH_BANKS; ++i) {
+	bank_addr = CONFIG_SYS_FLASH1_BASE;
+	for (i = 1; i < CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
 		bank_size = flash_get_size((vu_long *)bank_addr, &flash_info[i]);
 		if (flash_info[i].flash_id == FLASH_UNKNOWN) {
 			break;
@@ -112,13 +112,13 @@ unsigned long flash_init (void)
 	}
 
 	/* Protect monitor and environment sectors */
-#if CFG_MONITOR_BASE >= CFG_FLASH0_BASE
+#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH0_BASE
 	flash_protect(FLAG_PROTECT_SET,
-		CFG_MONITOR_BASE,
-		CFG_MONITOR_BASE + monitor_flash_len - 1,
+		CONFIG_SYS_MONITOR_BASE,
+		CONFIG_SYS_MONITOR_BASE + monitor_flash_len - 1,
 		&flash_info[0]);
-#if 0xfffffffc >= CFG_FLASH0_BASE
-#if 0xfffffffc <= CFG_FLASH0_BASE + CFG_FLASH0_SIZE - 1
+#if 0xfffffffc >= CONFIG_SYS_FLASH0_BASE
+#if 0xfffffffc <= CONFIG_SYS_FLASH0_BASE + CONFIG_SYS_FLASH0_SIZE - 1
 	flash_protect(FLAG_PROTECT_SET,
 		0xfffffffc, 0xffffffff,
 		&flash_info[0]);
@@ -126,10 +126,10 @@ unsigned long flash_init (void)
 #endif
 #endif
 
-#if (CFG_ENV_IS_IN_FLASH == 1) && defined(CFG_ENV_ADDR)
+#if defined(CONFIG_ENV_IS_IN_FLASH) && defined(CONFIG_ENV_ADDR)
 	flash_protect(FLAG_PROTECT_SET,
-		CFG_ENV_ADDR,
-		CFG_ENV_ADDR + CFG_ENV_SIZE - 1,
+		CONFIG_ENV_ADDR,
+		CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1,
 		&flash_info[0]);
 #endif
 
@@ -450,7 +450,7 @@ int flash_erase (flash_info_t *info, int s_first, int s_last)
 			while ((addr2[0] & 0x00800080) !=
 				(FLASH_WORD_SIZE) 0x00800080) {
 				if ((now=get_timer(start)) >
-					   CFG_FLASH_ERASE_TOUT) {
+					   CONFIG_SYS_FLASH_ERASE_TOUT) {
 					printf ("Timeout\n");
 					addr[0] = (FLASH_WORD_SIZE)0x00F000F0;
 					return 1;
@@ -581,7 +581,7 @@ static int write_word (flash_info_t *info, ulong dest, ulong data)
 		/* data polling for D7 */
 		start = get_timer (0);
 		while ((dest2[i] & 0x00800080) != (data2[i] & 0x00800080)) {
-			if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+			if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
 				addr2[0] = (FLASH_WORD_SIZE)0x00F000F0;
 				return (1);
 			}
diff --git a/board/exbitgen/init.S b/board/exbitgen/init.S
index 71aefb97c..760835aab 100644
--- a/board/exbitgen/init.S
+++ b/board/exbitgen/init.S
@@ -265,7 +265,7 @@ setup_continue:
 	.globl  sdram_init
 
 sdram_init:
-#if CFG_MONITOR_BASE < CFG_FLASH_BASE
+#if CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE
 	blr
 #else
 	mflr	r31
@@ -402,7 +402,7 @@ sdram_init:
 	addi	r9, 0, 13	/* bit offset of addressing mode in configuration register  */
 	slw	r29, r29, r9	/*  */
 	or	r3, r29, r3	/* merge size code and addressing mode */
-	ori	r6, r3, CFG_SDRAM_BASE + 1 /* insert base address and enable bank */
+	ori	r6, r3, CONFIG_SYS_SDRAM_BASE + 1 /* insert base address and enable bank */
 
 	/* Calculate banksize r15 = (density << 22) / 2 */
 	/*--------------------------------------------- */
diff --git a/board/exbitgen/u-boot.lds b/board/exbitgen/u-boot.lds
index e4faa446e..d76b97ea7 100644
--- a/board/exbitgen/u-boot.lds
+++ b/board/exbitgen/u-boot.lds
@@ -74,7 +74,7 @@ SECTIONS
     lib_generic/zlib.o		(.text)
 
 /*    . = env_offset;*/
-    common/environment.o(.text)
+    common/env_embedded.o(.text)
 
     *(.text)
     *(.fixup)
@@ -145,6 +145,7 @@ SECTIONS
   . = ALIGN(4);
    *(.bss)
    *(COMMON)
+   . = ALIGN(4);
   }
   _end = . ;
   PROVIDE (end = .);
diff --git a/board/fads/fads.c b/board/fads/fads.c
index 9e601df1b..9f7faaf47 100644
--- a/board/fads/fads.c
+++ b/board/fads/fads.c
@@ -190,7 +190,7 @@ static const uint edo_70ns[] =
 /* ------------------------------------------------------------------------- */
 static int _draminit (uint base, uint noMbytes, uint edo, uint delay)
 {
-	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
 	volatile memctl8xx_t *memctl = &immap->im_memctl;
 
 	/* init upm */
@@ -283,7 +283,7 @@ static int _draminit (uint base, uint noMbytes, uint edo, uint delay)
 
 static void _dramdisable(void)
 {
-	volatile immap_t     *immap = (immap_t *)CFG_IMMR;
+	volatile immap_t     *immap = (immap_t *)CONFIG_SYS_IMMR;
 	volatile memctl8xx_t *memctl = &immap->im_memctl;
 
 	memctl->memc_br2 = 0x00000000;
@@ -423,7 +423,7 @@ static const uint sdram_table[] =
 
 static int _initsdram(uint base, uint noMbytes)
 {
-	volatile immap_t     *immap = (immap_t *)CFG_IMMR;
+	volatile immap_t     *immap = (immap_t *)CONFIG_SYS_IMMR;
 	volatile memctl8xx_t *memctl = &immap->im_memctl;
 
 	upmconfig(UPMB, (uint *)sdram_table,sizeof(sdram_table)/sizeof(uint));
@@ -449,19 +449,19 @@ static int _initsdram(uint base, uint noMbytes)
 	/* Now run the precharge/nop/mrs commands.
 	*/
 
-	memctl->memc_mcr = 0x80808111;   /* run umpb cs4 1 count 1, addr 0x11 ??? (50Mhz) */
-	                                 /* run umpb cs4 1 count 1, addr 0x11 precharge+MRS (100Mhz) */
+	memctl->memc_mcr = 0x80808111;   /* run umpb cs4 1 count 1, addr 0x11 ??? (50MHz) */
+	                                 /* run umpb cs4 1 count 1, addr 0x11 precharge+MRS (100MHz) */
 	udelay(200);
 
 	/* Run 8 refresh cycles */
 
-	memctl->memc_mcr = SDRAM_MCRVALUE0; /* run upmb cs4 loop 1 addr 0x5 precharge+MRS (50 Mhz)*/
+	memctl->memc_mcr = SDRAM_MCRVALUE0; /* run upmb cs4 loop 1 addr 0x5 precharge+MRS (50 MHz)*/
 					    /* run upmb cs4 loop 1 addr 0x11 precharge+MRS (100MHz) */
 
 	udelay(200);
 
-	memctl->memc_mbmr = SDRAM_MBMRVALUE1; /* TLF 4 (100 Mhz) or TLF 8 (50MHz) */
-	memctl->memc_mcr = SDRAM_MCRVALUE1; /* run upmb cs4 loop 1 addr 0x30 refr (50 Mhz) */
+	memctl->memc_mbmr = SDRAM_MBMRVALUE1; /* TLF 4 (100 MHz) or TLF 8 (50MHz) */
+	memctl->memc_mcr = SDRAM_MCRVALUE1; /* run upmb cs4 loop 1 addr 0x30 refr (50 MHz) */
 					    /* run upmb cs4 loop 1 addr 0x11 precharge+MRS ??? (100MHz) */
 
 	udelay(200);
@@ -501,7 +501,7 @@ static int _initsdram(uint base, uint noMbytes)
 
 static int _initsdram(uint base, uint noMbytes)
 {
-	volatile immap_t     *immap = (immap_t *)CFG_IMMR;
+	volatile immap_t     *immap = (immap_t *)CONFIG_SYS_IMMR;
 	volatile memctl8xx_t *memctl = &immap->im_memctl;
 
 	upmconfig(UPMB, (uint *)sdram_table,sizeof(sdram_table)/sizeof(uint));
@@ -564,7 +564,7 @@ static int _initsdram(uint base, uint noMbytes)
 
 static void _sdramdisable(void)
 {
-	volatile immap_t     *immap = (immap_t *)CFG_IMMR;
+	volatile immap_t     *immap = (immap_t *)CONFIG_SYS_IMMR;
 	volatile memctl8xx_t *memctl = &immap->im_memctl;
 
 	memctl->memc_br4 = 0x00000000;
@@ -576,7 +576,7 @@ static void _sdramdisable(void)
 
 static int initsdram(uint base, uint *noMbytes)
 {
-	uint m = CFG_SDRAM_SIZE>>20;
+	uint m = CONFIG_SYS_SDRAM_SIZE>>20;
 
 	/* _initsdram needs access to sdram */
 	*((uint *)BCSR1) |= BCSR1_SDRAM_EN; /* enable sdram */
@@ -688,7 +688,7 @@ int testdram (void)
  * Check Board Identity:
  */
 
-#if defined(CONFIG_FADS) && defined(CFG_DAUGHTERBOARD)
+#if defined(CONFIG_FADS) && defined(CONFIG_SYS_DAUGHTERBOARD)
 static void checkdboard(void)
 {
 	/* get db type from BCSR 3 */
@@ -722,7 +722,7 @@ static void checkdboard(void)
 	default : printf("0x%x", k);
 	}
 }
-#endif	/* defined(CONFIG_FADS) && defined(CFG_DAUGHTERBOARD) */
+#endif	/* defined(CONFIG_FADS) && defined(CONFIG_SYS_DAUGHTERBOARD) */
 
 int checkboard (void)
 {
@@ -780,8 +780,8 @@ int checkboard (void)
 
 #if defined(CONFIG_CMD_PCMCIA)
 
-#ifdef CFG_PCMCIA_MEM_ADDR
-volatile unsigned char *pcmcia_mem = (unsigned char*)CFG_PCMCIA_MEM_ADDR;
+#ifdef CONFIG_SYS_PCMCIA_MEM_ADDR
+volatile unsigned char *pcmcia_mem = (unsigned char*)CONFIG_SYS_PCMCIA_MEM_ADDR;
 #endif
 
 int pcmcia_init(void)
@@ -792,10 +792,10 @@ int pcmcia_init(void)
 	/*
 	** Enable the PCMCIA for a Flash card.
 	*/
-	pcmp = (pcmconf8xx_t *)(&(((immap_t *)CFG_IMMR)->im_pcmcia));
+	pcmp = (pcmconf8xx_t *)(&(((immap_t *)CONFIG_SYS_IMMR)->im_pcmcia));
 
 #if 0
-	pcmp->pcmc_pbr0 = CFG_PCMCIA_MEM_ADDR;
+	pcmp->pcmc_pbr0 = CONFIG_SYS_PCMCIA_MEM_ADDR;
 	pcmp->pcmc_por0 = 0xc00ff05d;
 #endif
 
@@ -925,25 +925,25 @@ int pcmcia_init(void)
 
 /* ========================================================================= */
 
-#ifdef CFG_PC_IDE_RESET
+#ifdef CONFIG_SYS_PC_IDE_RESET
 
 void ide_set_reset(int on)
 {
-	volatile immap_t *immr = (immap_t *)CFG_IMMR;
+	volatile immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
 
 	/*
 	 * Configure PC for IDE Reset Pin
 	 */
 	if (on) {		/* assert RESET */
-		immr->im_ioport.iop_pcdat &= ~(CFG_PC_IDE_RESET);
+		immr->im_ioport.iop_pcdat &= ~(CONFIG_SYS_PC_IDE_RESET);
 	} else {		/* release RESET */
-		immr->im_ioport.iop_pcdat |=   CFG_PC_IDE_RESET;
+		immr->im_ioport.iop_pcdat |=   CONFIG_SYS_PC_IDE_RESET;
 	}
 
 	/* program port pin as GPIO output */
-	immr->im_ioport.iop_pcpar &= ~(CFG_PC_IDE_RESET);
-	immr->im_ioport.iop_pcso  &= ~(CFG_PC_IDE_RESET);
-	immr->im_ioport.iop_pcdir |=   CFG_PC_IDE_RESET;
+	immr->im_ioport.iop_pcpar &= ~(CONFIG_SYS_PC_IDE_RESET);
+	immr->im_ioport.iop_pcso  &= ~(CONFIG_SYS_PC_IDE_RESET);
+	immr->im_ioport.iop_pcdir |=   CONFIG_SYS_PC_IDE_RESET;
 }
 
-#endif	/* CFG_PC_IDE_RESET */
+#endif	/* CONFIG_SYS_PC_IDE_RESET */
diff --git a/board/fads/fads.h b/board/fads/fads.h
index 0a8b98352..24e43eab3 100644
--- a/board/fads/fads.h
+++ b/board/fads/fads.h
@@ -95,7 +95,7 @@
 #endif
 
 #ifdef CONFIG_FEC_ENET
-#define CFG_DISCOVER_PHY
+#define CONFIG_SYS_DISCOVER_PHY
 #define CONFIG_MII_INIT		1
 #endif
 
@@ -130,24 +130,24 @@
 /*
  * Miscellaneous configurable options
  */
-#define	CFG_PROMPT		"=>"		/* Monitor Command Prompt	*/
-#define CFG_HUSH_PARSER
-#define CFG_PROMPT_HUSH_PS2	"> "
-#define	CFG_LONGHELP				/* #undef to save memory	*/
+#define	CONFIG_SYS_PROMPT		"=>"		/* Monitor Command Prompt	*/
+#define CONFIG_SYS_HUSH_PARSER
+#define CONFIG_SYS_PROMPT_HUSH_PS2	"> "
+#define	CONFIG_SYS_LONGHELP				/* #undef to save memory	*/
 #if defined(CONFIG_CMD_KGDB)
-#define	CFG_CBSIZE		1024		/* Console I/O Buffer Size	*/
+#define	CONFIG_SYS_CBSIZE		1024		/* Console I/O Buffer Size	*/
 #else
-#define	CFG_CBSIZE		256		/* Console I/O Buffer Size	*/
+#define	CONFIG_SYS_CBSIZE		256		/* Console I/O Buffer Size	*/
 #endif
-#define	CFG_PBSIZE (CFG_CBSIZE + sizeof(CFG_PROMPT) + 16) /* Print Buffer Size	*/
-#define	CFG_MAXARGS		16		/* max number of command args	*/
-#define CFG_BARGSIZE		CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+#define	CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) /* Print Buffer Size	*/
+#define	CONFIG_SYS_MAXARGS		16		/* max number of command args	*/
+#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
 
-#define CFG_LOAD_ADDR		0x00100000
+#define CONFIG_SYS_LOAD_ADDR		0x00100000
 
-#define	CFG_HZ		        1000	/* decrementer freq: 1 ms ticks */
+#define	CONFIG_SYS_HZ		        1000	/* decrementer freq: 1 ms ticks */
 
-#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
 
 /*
  * Low Level Configuration Settings
@@ -158,25 +158,25 @@
 /*-----------------------------------------------------------------------
  * Internal Memory Mapped Register
  */
-#define CFG_IMMR		0xFF000000
+#define CONFIG_SYS_IMMR		0xFF000000
 
 /*-----------------------------------------------------------------------
  * Definitions for initial stack pointer and data area (in DPRAM)
  */
-#define CFG_INIT_RAM_ADDR	CFG_IMMR
-#define	CFG_INIT_RAM_END	0x2F00	/* End of used area in DPRAM	*/
-#define	CFG_GBL_DATA_SIZE	64  /* size in bytes reserved for initial data */
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define	CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_IMMR
+#define	CONFIG_SYS_INIT_RAM_END	0x2F00	/* End of used area in DPRAM	*/
+#define	CONFIG_SYS_GBL_DATA_SIZE	64  /* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define	CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
 /*-----------------------------------------------------------------------
  * Start addresses for the final memory configuration
  * (Set up by the startup code)
- * Please note that CFG_SDRAM_BASE _must_ start at 0
+ * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
  */
-#define	CFG_SDRAM_BASE		0x00000000
+#define	CONFIG_SYS_SDRAM_BASE		0x00000000
 #if defined(CONFIG_MPC86xADS) || defined(CONFIG_MPC885ADS) /* New ADS or Duet */
-#define	CFG_SDRAM_SIZE		0x00800000	/* 8 Mbyte */
+#define	CONFIG_SYS_SDRAM_SIZE		0x00800000	/* 8 Mbyte */
 /*
  * 2048	SDRAM rows
  * 1000	factor s -> ms
@@ -184,55 +184,55 @@
  * 4	Number of refresh cycles per period
  * 64	Refresh cycle in ms per number of rows
  */
-#define CFG_PTA_PER_CLK		((2048 * 64 * 1000) / (4 * 64))
+#define CONFIG_SYS_PTA_PER_CLK		((2048 * 64 * 1000) / (4 * 64))
 #elif defined(CONFIG_FADS)				/* Old/new FADS */
-#define	CFG_SDRAM_SIZE		0x00400000		/* 4 Mbyte */
+#define	CONFIG_SYS_SDRAM_SIZE		0x00400000		/* 4 Mbyte */
 #else							/* Old ADS */
-#define	CFG_SDRAM_SIZE		0x00000000		/* No SDRAM */
+#define	CONFIG_SYS_SDRAM_SIZE		0x00000000		/* No SDRAM */
 #endif
 
-#define CFG_MEMTEST_START	0x0100000	/* memtest works on	*/
-#if (CFG_SDRAM_SIZE)
-#define CFG_MEMTEST_END		CFG_SDRAM_SIZE	/* 1 ... SDRAM_SIZE	*/
+#define CONFIG_SYS_MEMTEST_START	0x0100000	/* memtest works on	*/
+#if (CONFIG_SYS_SDRAM_SIZE)
+#define CONFIG_SYS_MEMTEST_END		CONFIG_SYS_SDRAM_SIZE	/* 1 ... SDRAM_SIZE	*/
 #else
-#define CFG_MEMTEST_END		0x0400000	/* 1 ... 4 MB in DRAM	*/
-#endif /* CFG_SDRAM_SIZE */
+#define CONFIG_SYS_MEMTEST_END		0x0400000	/* 1 ... 4 MB in DRAM	*/
+#endif /* CONFIG_SYS_SDRAM_SIZE */
 
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define	CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux	*/
+#define	CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux	*/
 
-#define CFG_MONITOR_BASE	TEXT_BASE
-#define	CFG_MONITOR_LEN		(256 << 10)	/* Reserve 256 KB for monitor	*/
+#define CONFIG_SYS_MONITOR_BASE	TEXT_BASE
+#define	CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 256 KB for monitor	*/
 
 #ifdef CONFIG_BZIP2
-#define	CFG_MALLOC_LEN		(2500 << 10)	/* Reserve ~2.5 MB for malloc()	*/
+#define	CONFIG_SYS_MALLOC_LEN		(2500 << 10)	/* Reserve ~2.5 MB for malloc()	*/
 #else
-#define	CFG_MALLOC_LEN		(384 << 10)	/* Reserve 384 kB for malloc()	*/
+#define	CONFIG_SYS_MALLOC_LEN		(384 << 10)	/* Reserve 384 kB for malloc()	*/
 #endif /* CONFIG_BZIP2 */
 
 /*-----------------------------------------------------------------------
  * Flash organization
  */
-#define CFG_FLASH_BASE		CFG_MONITOR_BASE
-#define CFG_FLASH_SIZE		((uint)(8 * 1024 * 1024))	/* max 8Mbyte	*/
+#define CONFIG_SYS_FLASH_BASE		CONFIG_SYS_MONITOR_BASE
+#define CONFIG_SYS_FLASH_SIZE		((uint)(8 * 1024 * 1024))	/* max 8Mbyte	*/
 
-#define CFG_MAX_FLASH_BANKS	4	/* max number of memory banks		*/
-#define CFG_MAX_FLASH_SECT	8	/* max number of sectors on one chip	*/
+#define CONFIG_SYS_MAX_FLASH_BANKS	4	/* max number of memory banks		*/
+#define CONFIG_SYS_MAX_FLASH_SECT	8	/* max number of sectors on one chip	*/
 
-#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
-#define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
+#define CONFIG_SYS_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
+#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
 
-#define	CFG_ENV_IS_IN_FLASH	1
-#define CFG_ENV_SECT_SIZE	0x40000	/* see README - env sector total size	*/
-#define CFG_ENV_OFFSET		CFG_ENV_SECT_SIZE
-#define	CFG_ENV_SIZE		0x4000	/* Total Size of Environment		*/
-#define	CFG_USE_PPCENV			/* Environment embedded in sect .ppcenv */
+#define	CONFIG_ENV_IS_IN_FLASH	1
+#define CONFIG_ENV_SECT_SIZE	0x40000	/* see README - env sector total size	*/
+#define CONFIG_ENV_OFFSET		CONFIG_ENV_SECT_SIZE
+#define	CONFIG_ENV_SIZE		0x4000	/* Total Size of Environment		*/
+#define	CONFIG_SYS_USE_PPCENV			/* Environment embedded in sect .ppcenv */
 
-#define	CFG_DIRECT_FLASH_TFTP
+#define	CONFIG_SYS_DIRECT_FLASH_TFTP
 
 #if defined(CONFIG_CMD_JFFS2)
 
@@ -254,22 +254,22 @@
 #define MTDPARTS_DEFAULT	"mtdparts=fads-0:-@1m(user1),fads-1:-(user2),fads-2:-(user3),fads-3:-(user4)"
 */
 
-#define CFG_JFFS2_SORT_FRAGMENTS
+#define CONFIG_SYS_JFFS2_SORT_FRAGMENTS
 #endif
 
 /*-----------------------------------------------------------------------
  * Cache Configuration
  */
-#define CFG_CACHELINE_SIZE	16	/* For all MPC8xx CPUs			*/
-#define CFG_CACHELINE_SHIFT	4	/* log base 2 of the above value	*/
+#define CONFIG_SYS_CACHELINE_SIZE	16	/* For all MPC8xx CPUs			*/
+#define CONFIG_SYS_CACHELINE_SHIFT	4	/* log base 2 of the above value	*/
 
 /*-----------------------------------------------------------------------
  * I2C configuration
  */
 #if defined(CONFIG_CMD_I2C)
 #define CONFIG_HARD_I2C		1	/* I2C with hardware support */
-#define CFG_I2C_SPEED		400000	/* I2C speed and slave address defaults */
-#define CFG_I2C_SLAVE		0x7F
+#define CONFIG_SYS_I2C_SPEED		400000	/* I2C speed and slave address defaults */
+#define CONFIG_SYS_I2C_SLAVE		0x7F
 #endif
 
 /*-----------------------------------------------------------------------
@@ -279,10 +279,10 @@
  * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze
  */
 #if defined(CONFIG_WATCHDOG)
-#define CFG_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
+#define CONFIG_SYS_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
 			 SYPCR_SWE  | SYPCR_SWRI| SYPCR_SWP)
 #else
-#define CFG_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
+#define CONFIG_SYS_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
 #endif
 
 /*-----------------------------------------------------------------------
@@ -290,21 +290,21 @@
  *-----------------------------------------------------------------------
  * PCMCIA config., multi-function pin tri-state
  */
-#define CFG_SIUMCR	(SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_MLRC01)
+#define CONFIG_SYS_SIUMCR	(SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_MLRC01)
 
 /*-----------------------------------------------------------------------
  * TBSCR - Time Base Status and Control				11-26
  *-----------------------------------------------------------------------
  * Clear Reference Interrupt Status, Timebase freezing enabled
  */
-#define CFG_TBSCR	(TBSCR_REFA | TBSCR_REFB | TBSCR_TBE)
+#define CONFIG_SYS_TBSCR	(TBSCR_REFA | TBSCR_REFB | TBSCR_TBE)
 
 /*-----------------------------------------------------------------------
  * PISCR - Periodic Interrupt Status and Control		11-31
  *-----------------------------------------------------------------------
  * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
  */
-#define CFG_PISCR	(PISCR_PS | PISCR_PITF)
+#define CONFIG_SYS_PISCR	(PISCR_PS | PISCR_PITF)
 
 /*-----------------------------------------------------------------------
  * SCCR - System Clock and reset Control Register		15-27
@@ -313,14 +313,14 @@
  * power management and some other internal clocks
  */
 #define SCCR_MASK	SCCR_EBDF11
-#define CFG_SCCR	SCCR_TBS
+#define CONFIG_SYS_SCCR	SCCR_TBS
 
 /*-----------------------------------------------------------------------
  * DER - Debug Enable Register
  *-----------------------------------------------------------------------
  * Set to zero to prevent the processor from entering debug mode
  */
-#define CFG_DER		 0
+#define CONFIG_SYS_DER		 0
 
 /* Because of the way the 860 starts up and assigns CS0 the entire
  * address space, we have to set the memory controller differently.
@@ -339,17 +339,17 @@
 
 #define BCSR_ADDR		((uint) 0xFF080000)
 
-#define CFG_PRELIM_OR_AM	0xFF800000	/* OR addr mask */
+#define CONFIG_SYS_PRELIM_OR_AM	0xFF800000	/* OR addr mask */
 
 /* FLASH timing: ACS = 10, TRLX = 1, CSNT = 1, SCY = 3, EHTR = 0 */
-#define CFG_OR_TIMING_FLASH	(OR_CSNT_SAM  | OR_ACS_DIV4 | OR_BI | OR_SCY_3_CLK | OR_TRLX)
+#define CONFIG_SYS_OR_TIMING_FLASH	(OR_CSNT_SAM  | OR_ACS_DIV4 | OR_BI | OR_SCY_3_CLK | OR_TRLX)
 
-#define CFG_OR0_PRELIM	(CFG_PRELIM_OR_AM | CFG_OR_TIMING_FLASH)   /* 8 Mbyte until detected */
-#define CFG_BR0_PRELIM	((CFG_FLASH_BASE & BR_BA_MSK) | BR_V )
+#define CONFIG_SYS_OR0_PRELIM	(CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_FLASH)   /* 8 Mbyte until detected */
+#define CONFIG_SYS_BR0_PRELIM	((CONFIG_SYS_FLASH_BASE & BR_BA_MSK) | BR_V )
 
 /* BCSRx - Board Control and Status Registers */
-#define CFG_OR1_PRELIM	0xFFFF8110		/* 64Kbyte address space */
-#define CFG_BR1_PRELIM	((BCSR_ADDR) | BR_V)
+#define CONFIG_SYS_OR1_PRELIM	0xFFFF8110		/* 64Kbyte address space */
+#define CONFIG_SYS_BR1_PRELIM	((BCSR_ADDR) | BR_V)
 
 /*
  * Internal Definitions
@@ -442,9 +442,9 @@
 
 /* BSCR5 exists on MPC86xADS and MPC885ADS only */
 
-#define CFG_PHYDEV_ADDR		(BCSR_ADDR + 0x20000)
+#define CONFIG_SYS_PHYDEV_ADDR		(BCSR_ADDR + 0x20000)
 
-#define BCSR5			(CFG_PHYDEV_ADDR + 0x300)
+#define BCSR5			(CONFIG_SYS_PHYDEV_ADDR + 0x300)
 
 #define BCSR5_MII2_EN		0x40
 #define BCSR5_MII2_RST		0x20
@@ -462,14 +462,14 @@
  * PCMCIA stuff
  *-----------------------------------------------------------------------
  */
-#define CFG_PCMCIA_MEM_ADDR	(0xE0000000)
-#define CFG_PCMCIA_MEM_SIZE	( 64 << 20 )
-#define CFG_PCMCIA_DMA_ADDR	(0xE4000000)
-#define CFG_PCMCIA_DMA_SIZE	( 64 << 20 )
-#define CFG_PCMCIA_ATTRB_ADDR	(0xE8000000)
-#define CFG_PCMCIA_ATTRB_SIZE	( 64 << 20 )
-#define CFG_PCMCIA_IO_ADDR	(0xEC000000)
-#define CFG_PCMCIA_IO_SIZE	( 64 << 20 )
+#define CONFIG_SYS_PCMCIA_MEM_ADDR	(0xE0000000)
+#define CONFIG_SYS_PCMCIA_MEM_SIZE	( 64 << 20 )
+#define CONFIG_SYS_PCMCIA_DMA_ADDR	(0xE4000000)
+#define CONFIG_SYS_PCMCIA_DMA_SIZE	( 64 << 20 )
+#define CONFIG_SYS_PCMCIA_ATTRB_ADDR	(0xE8000000)
+#define CONFIG_SYS_PCMCIA_ATTRB_SIZE	( 64 << 20 )
+#define CONFIG_SYS_PCMCIA_IO_ADDR	(0xEC000000)
+#define CONFIG_SYS_PCMCIA_IO_SIZE	( 64 << 20 )
 
 /*-----------------------------------------------------------------------
  * IDE/ATA stuff
@@ -487,18 +487,18 @@
 #undef	CONFIG_IDE_LED			/* LED	 for ide not supported	*/
 #undef	CONFIG_IDE_RESET		/* reset for ide not supported	*/
 
-#define CFG_IDE_MAXBUS		1	/* max. 2 IDE busses	*/
-#define CFG_IDE_MAXDEVICE	(CFG_IDE_MAXBUS*2) /* max. 2 drives per IDE bus */
+#define CONFIG_SYS_IDE_MAXBUS		1	/* max. 2 IDE busses	*/
+#define CONFIG_SYS_IDE_MAXDEVICE	(CONFIG_SYS_IDE_MAXBUS*2) /* max. 2 drives per IDE bus */
 
-#define CFG_ATA_BASE_ADDR	CFG_PCMCIA_MEM_ADDR
-#define CFG_ATA_IDE0_OFFSET	0x0000
+#define CONFIG_SYS_ATA_BASE_ADDR	CONFIG_SYS_PCMCIA_MEM_ADDR
+#define CONFIG_SYS_ATA_IDE0_OFFSET	0x0000
 
 /* Offset for data I/O			*/
-#define CFG_ATA_DATA_OFFSET	(CFG_PCMCIA_MEM_SIZE + 0x320)
+#define CONFIG_SYS_ATA_DATA_OFFSET	(CONFIG_SYS_PCMCIA_MEM_SIZE + 0x320)
 /* Offset for normal register accesses	*/
-#define CFG_ATA_REG_OFFSET	(2 * CFG_PCMCIA_MEM_SIZE + 0x320)
+#define CONFIG_SYS_ATA_REG_OFFSET	(2 * CONFIG_SYS_PCMCIA_MEM_SIZE + 0x320)
 /* Offset for alternate registers	*/
-#define CFG_ATA_ALT_OFFSET	0x0000
+#define CONFIG_SYS_ATA_ALT_OFFSET	0x0000
 
 #define CONFIG_DISK_SPINUP_TIME 1000000
 /* #undef CONFIG_DISK_SPINUP_TIME */	/* usin  Compact Flash */
diff --git a/board/fads/flash.c b/board/fads/flash.c
index 7cda3a412..b9afb7517 100644
--- a/board/fads/flash.c
+++ b/board/fads/flash.c
@@ -24,17 +24,17 @@
 #include <common.h>
 #include <mpc8xx.h>
 
-flash_info_t flash_info[CFG_MAX_FLASH_BANKS];	/* info for FLASH chips */
+flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];	/* info for FLASH chips */
 
-#if defined(CFG_ENV_IS_IN_FLASH)
-# ifndef  CFG_ENV_ADDR
-#  define CFG_ENV_ADDR	(CFG_FLASH_BASE + CFG_ENV_OFFSET)
+#if defined(CONFIG_ENV_IS_IN_FLASH)
+# ifndef  CONFIG_ENV_ADDR
+#  define CONFIG_ENV_ADDR	(CONFIG_SYS_FLASH_BASE + CONFIG_ENV_OFFSET)
 # endif
-# ifndef  CFG_ENV_SIZE
-#  define CFG_ENV_SIZE	CFG_ENV_SECT_SIZE
+# ifndef  CONFIG_ENV_SIZE
+#  define CONFIG_ENV_SIZE	CONFIG_ENV_SECT_SIZE
 # endif
-# ifndef  CFG_ENV_SECT_SIZE
-#  define CFG_ENV_SECT_SIZE  CFG_ENV_SIZE
+# ifndef  CONFIG_ENV_SECT_SIZE
+#  define CONFIG_ENV_SECT_SIZE  CONFIG_ENV_SIZE
 # endif
 #endif
 
@@ -54,14 +54,14 @@ static int write_word (flash_info_t * info, ulong dest, ulong data);
  */
 unsigned long flash_init (void)
 {
-	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
 	volatile memctl8xx_t *memctl = &immap->im_memctl;
 	vu_long *bcsr = (vu_long *)BCSR_ADDR;
 	unsigned long pd_size, total_size, bsize, or_am;
 	int i;
 
 	/* Init: no FLASHes known */
-	for (i = 0; i < CFG_MAX_FLASH_BANKS; ++i) {
+	for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
 		flash_info[i].flash_id = FLASH_UNKNOWN;
 		flash_info[i].size = 0;
 		flash_info[i].sector_count = 0;
@@ -94,8 +94,8 @@ unsigned long flash_init (void)
 	}
 
 	total_size = 0;
-	for (i = 0; i < CFG_MAX_FLASH_BANKS && total_size < pd_size; ++i) {
-		bsize = flash_get_size((vu_long *)(CFG_FLASH_BASE + total_size),
+	for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS && total_size < pd_size; ++i) {
+		bsize = flash_get_size((vu_long *)(CONFIG_SYS_FLASH_BASE + total_size),
 				       &flash_info[i]);
 
 		if (flash_info[i].flash_id == FLASH_UNKNOWN) {
@@ -112,24 +112,24 @@ unsigned long flash_init (void)
 	}
 
 	/* Remap FLASH according to real size */
-	memctl->memc_or0 = or_am | CFG_OR_TIMING_FLASH;
+	memctl->memc_or0 = or_am | CONFIG_SYS_OR_TIMING_FLASH;
 
-	for (i = 0; i < CFG_MAX_FLASH_BANKS && flash_info[i].size != 0; ++i) {
-#if CFG_MONITOR_BASE >= CFG_FLASH_BASE
+	for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS && flash_info[i].size != 0; ++i) {
+#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE
 		/* monitor protection ON by default */
-		if (CFG_MONITOR_BASE >= flash_info[i].start[0])
+		if (CONFIG_SYS_MONITOR_BASE >= flash_info[i].start[0])
 			flash_protect (FLAG_PROTECT_SET,
-				       CFG_MONITOR_BASE,
-				       CFG_MONITOR_BASE + monitor_flash_len - 1,
+				       CONFIG_SYS_MONITOR_BASE,
+				       CONFIG_SYS_MONITOR_BASE + monitor_flash_len - 1,
 				       &flash_info[i]);
 #endif
 
-#ifdef	CFG_ENV_IS_IN_FLASH
+#ifdef	CONFIG_ENV_IS_IN_FLASH
 		/* ENV protection ON by default */
-		if (CFG_ENV_ADDR >= flash_info[i].start[0])
+		if (CONFIG_ENV_ADDR >= flash_info[i].start[0])
 			flash_protect (FLAG_PROTECT_SET,
-				       CFG_ENV_ADDR,
-				       CFG_ENV_ADDR + CFG_ENV_SIZE - 1,
+				       CONFIG_ENV_ADDR,
+				       CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1,
 				       &flash_info[i]);
 #endif
 	}
@@ -428,7 +428,7 @@ int flash_erase (flash_info_t * info, int s_first, int s_last)
 	addr = (vu_long *) (info->start[l_sect]);
 	while ((addr[0] & 0xFFFFFFFF) != 0xFFFFFFFF)
 	{
-		if ((now = get_timer (start)) > CFG_FLASH_ERASE_TOUT) {
+		if ((now = get_timer (start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
 			printf ("Timeout\n");
 			return ERR_TIMOUT;
 		}
@@ -552,7 +552,7 @@ static int write_word (flash_info_t * info, ulong dest, ulong data)
 	start = get_timer (0);
 	while ((*((vu_long *) dest) & 0x80808080) != (data & 0x80808080))
 	{
-		if (get_timer (start) > CFG_FLASH_WRITE_TOUT) {
+		if (get_timer (start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
 			return ERR_TIMOUT;
 		}
 	}
diff --git a/board/fads/u-boot.lds b/board/fads/u-boot.lds
index c7571e499..194ca6987 100644
--- a/board/fads/u-boot.lds
+++ b/board/fads/u-boot.lds
@@ -53,7 +53,7 @@ SECTIONS
     cpu/mpc8xx/start.o		(.text)
 
     /*. = DEFINED(env_offset) ? env_offset : .;*/
-    common/environment.o	(.ppcenv)
+    common/env_embedded.o	(.ppcenv)
 
     *(.text)
     *(.fixup)
@@ -124,6 +124,7 @@ SECTIONS
    *(.dynbss)
    *(.bss)
    *(COMMON)
+   . = ALIGN(4);
   }
   _end = . ;
   PROVIDE (end = .);
diff --git a/board/fads/u-boot.lds.debug b/board/fads/u-boot.lds.debug
index fd2245f57..67d37ae33 100644
--- a/board/fads/u-boot.lds.debug
+++ b/board/fads/u-boot.lds.debug
@@ -62,7 +62,7 @@ SECTIONS
     lib_ppc/extable.o	(.text)
 
     . = env_offset;
-    common/environment.o(.text)
+    common/env_embedded.o(.text)
 
     *(.text)
     *(.fixup)
diff --git a/board/flagadm/flagadm.c b/board/flagadm/flagadm.c
index 7caedc99a..dc9e2dcc1 100644
--- a/board/flagadm/flagadm.c
+++ b/board/flagadm/flagadm.c
@@ -98,18 +98,18 @@ int checkboard (void)
 
 phys_size_t initdram (int board_type)
 {
-	volatile immap_t     *immap  = (immap_t *)CFG_IMMR;
+	volatile immap_t     *immap  = (immap_t *)CONFIG_SYS_IMMR;
 	volatile memctl8xx_t *memctl = &immap->im_memctl;
 	long int size_b0;
 
-	memctl->memc_or2 = CFG_OR2;
-	memctl->memc_br2 = CFG_BR2;
+	memctl->memc_or2 = CONFIG_SYS_OR2;
+	memctl->memc_br2 = CONFIG_SYS_BR2;
 
 	udelay(100);
 	upmconfig(UPMA, (uint *)sdram_table, sizeof(sdram_table)/sizeof(uint));
 
 	memctl->memc_mptpr = MPTPR_PTP_DIV16;
-	memctl->memc_mamr = CFG_MAMR_48_SDR | MAMR_TLFA_1X;
+	memctl->memc_mamr = CONFIG_SYS_MAMR_48_SDR | MAMR_TLFA_1X;
 
 	/*Do the initialization of the SDRAM*/
 	/*Start with the precharge cycle*/
@@ -117,7 +117,7 @@ phys_size_t initdram (int board_type)
 				MCR_MLCF(1) | MCR_MAD(0x5));
 
 	/*Then we need two refresh cycles*/
-	memctl->memc_mamr = CFG_MAMR_48_SDR | MAMR_TLFA_2X;
+	memctl->memc_mamr = CONFIG_SYS_MAMR_48_SDR | MAMR_TLFA_2X;
 	memctl->memc_mcr = (MCR_OP_RUN | MCR_UPM_A | MCR_MB_CS2 | \
 				MCR_MLCF(2) | MCR_MAD(0x30));
 
@@ -127,7 +127,7 @@ phys_size_t initdram (int board_type)
 				MCR_MLCF(1) | MCR_MAD(0x1C));
 
 	/* That should do it, just enable the periodic refresh in burst of 4*/
-	memctl->memc_mamr = CFG_MAMR_48_SDR | MAMR_TLFA_4X;
+	memctl->memc_mamr = CONFIG_SYS_MAMR_48_SDR | MAMR_TLFA_4X;
 	memctl->memc_mamr |= (MAMR_PTAE | MAMR_GPL_A4DIS);
 
 	size_b0 = 16*1024*1024;
@@ -143,8 +143,8 @@ phys_size_t initdram (int board_type)
 
 	memctl->memc_mbmr = MBMR_GPL_B4DIS;
 
-	memctl->memc_or4 = CFG_OR4;
-	memctl->memc_br4 = CFG_BR4;
+	memctl->memc_or4 = CONFIG_SYS_OR4;
+	memctl->memc_br4 = CONFIG_SYS_BR4;
 
 	return (size_b0);
 }
diff --git a/board/flagadm/flash.c b/board/flagadm/flash.c
index fd0082c13..bbefbacea 100644
--- a/board/flagadm/flash.c
+++ b/board/flagadm/flash.c
@@ -25,7 +25,7 @@
 #include <mpc8xx.h>
 #include <flash.h>
 
-flash_info_t	flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips	*/
+flash_info_t	flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips	*/
 
 /*-----------------------------------------------------------------------
  * Functions
@@ -39,53 +39,53 @@ int _flash_real_protect(flash_info_t *info, long idx, int on);
 
 unsigned long flash_init (void)
 {
-	volatile immap_t	*immap  = (immap_t *)CFG_IMMR;
+	volatile immap_t	*immap  = (immap_t *)CONFIG_SYS_IMMR;
 	volatile memctl8xx_t	*memctl = &immap->im_memctl;
 	int i;
 	int rec;
 
-	for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) {
+	for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
 		flash_info[i].flash_id = FLASH_UNKNOWN;
 	}
 
-	*((vu_short*)CFG_FLASH_BASE) = 0xffff;
+	*((vu_short*)CONFIG_SYS_FLASH_BASE) = 0xffff;
 
-	flash_get_geometry ((vu_long*)CFG_FLASH_BASE, &flash_info[0]);
+	flash_get_geometry ((vu_long*)CONFIG_SYS_FLASH_BASE, &flash_info[0]);
 
 	/* Remap FLASH according to real size */
-	memctl->memc_or0 = CFG_OR_TIMING_FLASH | (-flash_info[0].size & 0xFFFF8000);
-	memctl->memc_br0 = (CFG_FLASH_BASE & BR_BA_MSK) |
+	memctl->memc_or0 = CONFIG_SYS_OR_TIMING_FLASH | (-flash_info[0].size & 0xFFFF8000);
+	memctl->memc_br0 = (CONFIG_SYS_FLASH_BASE & BR_BA_MSK) |
 		(memctl->memc_br0 & ~(BR_BA_MSK));
 
-	rec = flash_recognize((vu_long*)CFG_FLASH_BASE);
+	rec = flash_recognize((vu_long*)CONFIG_SYS_FLASH_BASE);
 
 	if (rec == FLASH_UNKNOWN) {
 		printf ("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n",
 				flash_info[0].size, flash_info[0].size<<20);
 	}
 
-#if CFG_FLASH_PROTECTION
+#if CONFIG_SYS_FLASH_PROTECTION
 	/*Unprotect all the flash memory*/
 	flash_unprotect(&flash_info[0]);
 #endif
 
-	*((vu_short*)CFG_FLASH_BASE) = 0xffff;
+	*((vu_short*)CONFIG_SYS_FLASH_BASE) = 0xffff;
 
 	return (flash_info[0].size);
 
-#if CFG_MONITOR_BASE >= CFG_FLASH_BASE
+#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE
 	/* monitor protection ON by default */
 	flash_protect(FLAG_PROTECT_SET,
-		      CFG_MONITOR_BASE,
-		      CFG_MONITOR_BASE+monitor_flash_len-1,
+		      CONFIG_SYS_MONITOR_BASE,
+		      CONFIG_SYS_MONITOR_BASE+monitor_flash_len-1,
 		      &flash_info[0]);
 #endif
 
-#ifdef	CFG_ENV_IS_IN_FLASH
+#ifdef	CONFIG_ENV_IS_IN_FLASH
 	/* ENV protection ON by default */
 	flash_protect(FLAG_PROTECT_SET,
-		      CFG_ENV_OFFSET,
-		      CFG_ENV_OFFSET+CFG_ENV_SIZE-1,
+		      CONFIG_ENV_OFFSET,
+		      CONFIG_ENV_OFFSET+CONFIG_ENV_SIZE-1,
 		      &flash_info[0]);
 #endif
 	return (flash_info[0].size);
@@ -400,7 +400,7 @@ int	flash_erase (flash_info_t *info, int s_first, int s_last)
 			*addr = 0x70; /*Read status register command*/
 			tmp = (short)*addr & 0x00FF; /* Read the status */
 			while (!(tmp & INTEL_FLASH_STATUS_WSMS)) {
-				if ((now=get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+				if ((now=get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
 					*addr = 0x0050; /* Reset the status register */
 					*addr = 0xffff;
 					printf ("Timeout\n");
@@ -440,7 +440,7 @@ void flash_unprotect (flash_info_t *info)
 	for(i = 0; i < info->sector_count; i++)
 		info->protect[i] = 0;
 
-#ifdef CFG_FLASH_PROTECTION
+#ifdef CONFIG_SYS_FLASH_PROTECTION
 		_flash_real_protect(info, 0, 0);
 #endif
 }
@@ -555,7 +555,7 @@ int write_word (flash_info_t *info, ulong dest, ulong da)
 		flag  = 0;
 		*addr = 0x0070; /*Read statusregister command */
 		while (((csr = *addr) & INTEL_FLASH_STATUS_WSMS)!=INTEL_FLASH_STATUS_WSMS) {
-			if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+			if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
 				flag = 1;
 				break;
 			}
@@ -642,7 +642,7 @@ int _flash_real_protect(flash_info_t *info, long idx, int prot)
 	while(!(tmp & INTEL_FLASH_STATUS_WSMS)) {
 		/*Write State Machine Busy*/
 		/*Wait untill done or timeout.*/
-		if ((now=get_timer(start)) > CFG_FLASH_WRITE_TOUT) {
+		if ((now=get_timer(start)) > CONFIG_SYS_FLASH_WRITE_TOUT) {
 			*addr = 0x0050; /* Reset the status register */
 			*addr = 0xffff; /* Reset the chip */
 			printf ("TTimeout\n");
@@ -670,7 +670,7 @@ int _flash_real_protect(flash_info_t *info, long idx, int prot)
 	tmp = ((ushort)(*addr)) & 0x00FF; /* Read the status */
 	while (!(tmp & INTEL_FLASH_STATUS_WSMS)) {
 		/* Write State Machine Busy */
-		if ((now=get_timer(start)) > CFG_FLASH_WRITE_TOUT) {
+		if ((now=get_timer(start)) > CONFIG_SYS_FLASH_WRITE_TOUT) {
 			*addr = 0x0050; /* Reset the status register */
 			*addr = 0xffff;
 			printf ("Timeout\n");
diff --git a/board/flagadm/u-boot.lds b/board/flagadm/u-boot.lds
index f0984126b..f36259acb 100644
--- a/board/flagadm/u-boot.lds
+++ b/board/flagadm/u-boot.lds
@@ -123,6 +123,7 @@ SECTIONS
    *(.dynbss)
    *(.bss)
    *(COMMON)
+   . = ALIGN(4);
   }
   _end = . ;
   PROVIDE (end = .);
diff --git a/board/flagadm/u-boot.lds.debug b/board/flagadm/u-boot.lds.debug
index 85072feda..dbec9860a 100644
--- a/board/flagadm/u-boot.lds.debug
+++ b/board/flagadm/u-boot.lds.debug
@@ -61,7 +61,7 @@ SECTIONS
     lib_generic/crc32.o		(.text)
 
     . = env_offset;
-    common/environment.o(.text)
+    common/env_embedded.o(.text)
 
     *(.text)
     *(.fixup)
diff --git a/board/freescale/common/Makefile b/board/freescale/common/Makefile
index 508e3b569..02a824d9f 100644
--- a/board/freescale/common/Makefile
+++ b/board/freescale/common/Makefile
@@ -30,12 +30,12 @@ endif
 LIB	= $(obj)lib$(VENDOR).a
 
 COBJS-${CONFIG_FSL_CADMUS}	+= cadmus.o
-COBJS-${CONFIG_FSL_CDS_EEPROM}	+= cds_eeprom.o
 COBJS-${CONFIG_FSL_VIA}		+= cds_via.o
 COBJS-${CONFIG_FSL_DIU_FB}	+= fsl_diu_fb.o fsl_logo_bmp.o
 COBJS-${CONFIG_FSL_PIXIS}	+= pixis.o
 COBJS-${CONFIG_PQ_MDS_PIB}	+= pq-mds-pib.o
 COBJS-${CONFIG_ID_EEPROM}	+= sys_eeprom.o
+COBJS-${CONFIG_FSL_SGMII_RISER}	+= sgmii_riser.o
 
 COBJS-${CONFIG_MPC8541CDS}	+= cds_pci_ft.o
 COBJS-${CONFIG_MPC8548CDS}	+= cds_pci_ft.o
diff --git a/board/freescale/common/cadmus.c b/board/freescale/common/cadmus.c
index 5f86de5af..db54bc4d5 100644
--- a/board/freescale/common/cadmus.c
+++ b/board/freescale/common/cadmus.c
@@ -27,8 +27,8 @@
 /*
  * CADMUS Board System Registers
  */
-#ifndef CFG_CADMUS_BASE_REG
-#define CFG_CADMUS_BASE_REG	(CADMUS_BASE_ADDR + 0x4000)
+#ifndef CONFIG_SYS_CADMUS_BASE_REG
+#define CONFIG_SYS_CADMUS_BASE_REG	(CADMUS_BASE_ADDR + 0x4000)
 #endif
 
 typedef struct cadmus_reg {
@@ -47,7 +47,7 @@ typedef struct cadmus_reg {
 unsigned int
 get_board_version(void)
 {
-	volatile cadmus_reg_t *cadmus = (cadmus_reg_t *)CFG_CADMUS_BASE_REG;
+	volatile cadmus_reg_t *cadmus = (cadmus_reg_t *)CONFIG_SYS_CADMUS_BASE_REG;
 
 	return cadmus->cm_ver;
 }
@@ -56,7 +56,7 @@ get_board_version(void)
 unsigned long
 get_clock_freq(void)
 {
-	volatile cadmus_reg_t *cadmus = (cadmus_reg_t *)CFG_CADMUS_BASE_REG;
+	volatile cadmus_reg_t *cadmus = (cadmus_reg_t *)CONFIG_SYS_CADMUS_BASE_REG;
 
 	uint pci1_speed = (cadmus->cm_pci >> 2) & 0x3; /* PSPEED in [4:5] */
 
@@ -74,7 +74,7 @@ get_clock_freq(void)
 unsigned int
 get_pci_slot(void)
 {
-	volatile cadmus_reg_t *cadmus = (cadmus_reg_t *)CFG_CADMUS_BASE_REG;
+	volatile cadmus_reg_t *cadmus = (cadmus_reg_t *)CONFIG_SYS_CADMUS_BASE_REG;
 
 	/*
 	 * PCI slot in USER bits CSR[6:7] by convention.
@@ -86,7 +86,7 @@ get_pci_slot(void)
 unsigned int
 get_pci_dual(void)
 {
-	volatile cadmus_reg_t *cadmus = (cadmus_reg_t *)CFG_CADMUS_BASE_REG;
+	volatile cadmus_reg_t *cadmus = (cadmus_reg_t *)CONFIG_SYS_CADMUS_BASE_REG;
 
 	/*
 	 * PCI DUAL in CM_PCI[3]
diff --git a/board/freescale/common/fsl_diu_fb.c b/board/freescale/common/fsl_diu_fb.c
index 75f782e9d..2fc878be8 100644
--- a/board/freescale/common/fsl_diu_fb.c
+++ b/board/freescale/common/fsl_diu_fb.c
@@ -205,7 +205,7 @@ int fsl_diu_init(int xres,
 	unsigned int i, j;
 
 	debug("Enter fsl_diu_init\n");
-	dr.diu_reg = (struct diu *) (CFG_DIU_ADDR);
+	dr.diu_reg = (struct diu *) (CONFIG_SYS_DIU_ADDR);
 	hw = (struct diu *) dr.diu_reg;
 
 	disable_lcdc();
@@ -242,10 +242,10 @@ int fsl_diu_init(int xres,
 			printf("Unable to allocate fb memory 1\n");
 			return -1;
 		}
-	} else {
-		memset(info->screen_base, 0, info->smem_len);
 	}
 
+	memset(info->screen_base, 0, info->smem_len);
+
 	dr.diu_reg->desc[0] = (unsigned int) &dummy_ad;
 	dr.diu_reg->desc[1] = (unsigned int) &dummy_ad;
 	dr.diu_reg->desc[2] = (unsigned int) &dummy_ad;
@@ -403,7 +403,7 @@ static int map_video_memory(struct fb_info *info, unsigned long bytes_align)
 	mask = bytes_align - 1;
 	offset = (unsigned long)info->screen_base & mask;
 	if (offset) {
-		info->screen_base += offset;
+		info->screen_base += (bytes_align - offset);
 		info->smem_len = info->smem_len - (bytes_align - offset);
 	} else
 		info->smem_len = info->smem_len - bytes_align;
diff --git a/board/freescale/common/pixis.c b/board/freescale/common/pixis.c
index 64e2e08c5..96820ac60 100644
--- a/board/freescale/common/pixis.c
+++ b/board/freescale/common/pixis.c
@@ -26,6 +26,7 @@
 #include <command.h>
 #include <watchdog.h>
 #include <asm/cache.h>
+#include <asm/io.h>
 
 #include "pixis.h"
 
@@ -206,8 +207,8 @@ void read_from_px_regs_altbank(int set)
 	out8(PIXIS_BASE + PIXIS_VCFGEN1, tmp);
 }
 
-#ifndef CFG_PIXIS_VBOOT_MASK
-#define CFG_PIXIS_VBOOT_MASK	(0x40)
+#ifndef CONFIG_SYS_PIXIS_VBOOT_MASK
+#define CONFIG_SYS_PIXIS_VBOOT_MASK	(0x40)
 #endif
 
 void clear_altbank(void)
@@ -215,7 +216,7 @@ void clear_altbank(void)
 	u8 tmp;
 
 	tmp = in8(PIXIS_BASE + PIXIS_VBOOT);
-	tmp &= ~CFG_PIXIS_VBOOT_MASK;
+	tmp &= ~CONFIG_SYS_PIXIS_VBOOT_MASK;
 
 	out8(PIXIS_BASE + PIXIS_VBOOT, tmp);
 }
@@ -226,7 +227,7 @@ void set_altbank(void)
 	u8 tmp;
 
 	tmp = in8(PIXIS_BASE + PIXIS_VBOOT);
-	tmp |= CFG_PIXIS_VBOOT_MASK;
+	tmp |= CONFIG_SYS_PIXIS_VBOOT_MASK;
 
 	out8(PIXIS_BASE + PIXIS_VBOOT, tmp);
 }
@@ -282,6 +283,76 @@ U_BOOT_CMD(
 	   "diswd	- Disable watchdog timer \n",
 	   NULL);
 
+#ifdef CONFIG_PIXIS_SGMII_CMD
+int pixis_set_sgmii(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+	int which_tsec = -1;
+	uchar mask;
+	uchar switch_mask;
+
+	if (argc > 2)
+		if (strcmp(argv[1], "all") != 0)
+			which_tsec = simple_strtoul(argv[1], NULL, 0);
+
+	switch (which_tsec) {
+#ifdef CONFIG_TSEC1
+	case 1:
+		mask = PIXIS_VSPEED2_TSEC1SER;
+		switch_mask = PIXIS_VCFGEN1_TSEC1SER;
+		break;
+#endif
+#ifdef CONFIG_TSEC2
+	case 2:
+		mask = PIXIS_VSPEED2_TSEC2SER;
+		switch_mask = PIXIS_VCFGEN1_TSEC2SER;
+		break;
+#endif
+#ifdef CONFIG_TSEC3
+	case 3:
+		mask = PIXIS_VSPEED2_TSEC3SER;
+		switch_mask = PIXIS_VCFGEN1_TSEC3SER;
+		break;
+#endif
+#ifdef CONFIG_TSEC4
+	case 4:
+		mask = PIXIS_VSPEED2_TSEC4SER;
+		switch_mask = PIXIS_VCFGEN1_TSEC4SER;
+		break;
+#endif
+	default:
+		mask = PIXIS_VSPEED2_MASK;
+		switch_mask = PIXIS_VCFGEN1_MASK;
+		break;
+	}
+
+	/* Toggle whether the switches or FPGA control the settings */
+	if (!strcmp(argv[argc - 1], "switch"))
+		clrbits_8((unsigned char *)PIXIS_BASE + PIXIS_VCFGEN1,
+			switch_mask);
+	else
+		setbits_8((unsigned char *)PIXIS_BASE + PIXIS_VCFGEN1,
+			switch_mask);
+
+	/* If it's not the switches, enable or disable SGMII, as specified */
+	if (!strcmp(argv[argc - 1], "on"))
+		clrbits_8((unsigned char *)PIXIS_BASE + PIXIS_VSPEED2, mask);
+	else if (!strcmp(argv[argc - 1], "off"))
+		setbits_8((unsigned char *)PIXIS_BASE + PIXIS_VSPEED2, mask);
+
+	return 0;
+}
+
+U_BOOT_CMD(
+		pixis_set_sgmii, CONFIG_SYS_MAXARGS, 1, pixis_set_sgmii,
+		"pixis_set_sgmii"
+		" - Enable or disable SGMII mode for a given TSEC \n",
+		"\npixis_set_sgmii [TSEC num] <on|off|switch>\n"
+		"    TSEC num: 1,2,3,4 or 'all'.  'all' is default.\n"
+		"    on - enables SGMII\n"
+		"    off - disables SGMII\n"
+		"    switch - use switch settings\n");
+#endif
+
 /*
  * This function takes the non-integral cpu:mpx pll ratio
  * and converts it to an integer that can be used to assign
@@ -398,7 +469,9 @@ pixis_reset_cmd(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 	 */
 	if ((p_cf && !(p_cf_sysclk && p_cf_corepll && p_cf_mpxpll))
 	    ||	unknown_param) {
+#ifdef CONFIG_SYS_LONGHELP
 		puts(cmdtp->help);
+#endif
 		return 1;
 	}
 
@@ -428,7 +501,9 @@ pixis_reset_cmd(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 		if (!(set_px_sysclk(sysclk)
 		      && set_px_corepll(corepll)
 		      && set_px_mpxpll(mpxpll))) {
+#ifdef CONFIG_SYS_LONGHELP
 			puts(cmdtp->help);
+#endif
 			return 1;
 		}
 		read_from_px_regs(1);
@@ -463,7 +538,7 @@ pixis_reset_cmd(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 
 
 U_BOOT_CMD(
-	pixis_reset, CFG_MAXARGS, 1, pixis_reset_cmd,
+	pixis_reset, CONFIG_SYS_MAXARGS, 1, pixis_reset_cmd,
 	"pixis_reset - Reset the board using the FPGA sequencer\n",
 	"    pixis_reset\n"
 	"    pixis_reset [altbank]\n"
diff --git a/board/freescale/common/sgmii_riser.c b/board/freescale/common/sgmii_riser.c
new file mode 100644
index 000000000..5ccd6bcad
--- /dev/null
+++ b/board/freescale/common/sgmii_riser.c
@@ -0,0 +1,26 @@
+/*
+ * Freescale SGMII Riser Card
+ *
+ * This driver supports the SGMII Riser card found on the
+ * "DS" style of development board from Freescale.
+ *
+ * This software may be used and distributed according to the
+ * terms of the GNU Public License, Version 2, incorporated
+ * herein by reference.
+ *
+ * Copyright 2008 Freescale Semiconductor, Inc.
+ *
+ */
+
+#include <config.h>
+#include <common.h>
+#include <tsec.h>
+
+void fsl_sgmii_riser_init(struct tsec_info_struct *tsec_info, int num)
+{
+	int i;
+
+	for (i = 0; i < num; i++)
+		if (tsec_info[i].flags & TSEC_SGMII)
+			tsec_info[i].phyaddr += SGMII_RISER_PHY_OFFSET;
+}
diff --git a/board/freescale/common/sgmii_riser.h b/board/freescale/common/sgmii_riser.h
new file mode 100644
index 000000000..8d56a1f59
--- /dev/null
+++ b/board/freescale/common/sgmii_riser.h
@@ -0,0 +1,15 @@
+/*
+ * Freescale SGMII Riser Card
+ *
+ * This driver supports the SGMII Riser card found on the
+ * "DS" style of development board from Freescale.
+ *
+ * This software may be used and distributed according to the
+ * terms of the GNU Public License, Version 2, incorporated
+ * herein by reference.
+ *
+ * Copyright 2008 Freescale Semiconductor, Inc.
+ *
+ */
+
+void fsl_sgmii_riser_init(struct tsec_info_struct *tsec_info, int num);
diff --git a/board/freescale/common/sys_eeprom.c b/board/freescale/common/sys_eeprom.c
index e53ead04f..eb58c7fd5 100644
--- a/board/freescale/common/sys_eeprom.c
+++ b/board/freescale/common/sys_eeprom.c
@@ -30,8 +30,8 @@
 
 #include "../common/eeprom.h"
 
-#if !defined(CFG_I2C_EEPROM_CCID) && !defined(CFG_I2C_EEPROM_NXID)
-#error "Please define either CFG_I2C_EEPROM_CCID or CFG_I2C_EEPROM_NXID"
+#if !defined(CONFIG_SYS_I2C_EEPROM_CCID) && !defined(CONFIG_SYS_I2C_EEPROM_NXID)
+#error "Please define either CONFIG_SYS_I2C_EEPROM_CCID or CONFIG_SYS_I2C_EEPROM_NXID"
 #endif
 
 /**
@@ -40,7 +40,7 @@
  * See application note AN3638 for details.
  */
 static struct __attribute__ ((__packed__)) eeprom {
-#ifdef CFG_I2C_EEPROM_CCID
+#ifdef CONFIG_SYS_I2C_EEPROM_CCID
 	u8 id[4];         /* 0x00 - 0x03 EEPROM Tag 'CCID' */
 	u8 major;         /* 0x04        Board revision, major */
 	u8 minor;         /* 0x05        Board revision, minor */
@@ -53,7 +53,7 @@ static struct __attribute__ ((__packed__)) eeprom {
 	u8 mac[8][6];     /* 0x42 - 0x71 MAC addresses */
 	u32 crc;          /* 0x72        CRC32 checksum */
 #endif
-#ifdef CFG_I2C_EEPROM_NXID
+#ifdef CONFIG_SYS_I2C_EEPROM_NXID
 	u8 id[4];         /* 0x00 - 0x03 EEPROM Tag 'NXID' */
 	u8 sn[12];        /* 0x04 - 0x0F Serial Number */
 	u8 errata[5];     /* 0x10 - 0x14 Errata Level */
@@ -74,12 +74,12 @@ static struct __attribute__ ((__packed__)) eeprom {
 /* Set to 1 if we've read EEPROM into memory */
 static int has_been_read = 0;
 
-#ifdef CFG_I2C_EEPROM_NXID
+#ifdef CONFIG_SYS_I2C_EEPROM_NXID
 /* Is this a valid NXID EEPROM? */
 #define is_valid (*((u32 *)e.id) == (('N' << 24) | ('X' << 16) | ('I' << 8) | 'D'))
 #endif
 
-#ifdef CFG_I2C_EEPROM_CCID
+#ifdef CONFIG_SYS_I2C_EEPROM_CCID
 /* Is this a valid CCID EEPROM? */
 #define is_valid (*((u32 *)e.id) == (('C' << 24) | ('C' << 16) | ('I' << 8) | 'D'))
 #endif
@@ -93,7 +93,7 @@ static void show_eeprom(void)
 	unsigned int crc;
 
 	/* EEPROM tag ID, either CCID or NXID */
-#ifdef CFG_I2C_EEPROM_NXID
+#ifdef CONFIG_SYS_I2C_EEPROM_NXID
 	printf("ID: %c%c%c%c v%u\n", e.id[0], e.id[1], e.id[2], e.id[3],
 		be32_to_cpu(e.version));
 #else
@@ -104,7 +104,7 @@ static void show_eeprom(void)
 	printf("SN: %s\n", e.sn);
 
 	/* Errata level. */
-#ifdef CFG_I2C_EEPROM_NXID
+#ifdef CONFIG_SYS_I2C_EEPROM_NXID
 	printf("Errata: %s\n", e.errata);
 #else
 	printf("Errata: %c%c\n",
@@ -152,22 +152,22 @@ static void show_eeprom(void)
 static int read_eeprom(void)
 {
 	int ret;
-#ifdef CFG_EEPROM_BUS_NUM
+#ifdef CONFIG_SYS_EEPROM_BUS_NUM
 	unsigned int bus;
 #endif
 
 	if (has_been_read)
 		return 0;
 
-#ifdef CFG_EEPROM_BUS_NUM
+#ifdef CONFIG_SYS_EEPROM_BUS_NUM
 	bus = i2c_get_bus_num();
-	i2c_set_bus_num(CFG_EEPROM_BUS_NUM);
+	i2c_set_bus_num(CONFIG_SYS_EEPROM_BUS_NUM);
 #endif
 
-	ret = i2c_read(CFG_I2C_EEPROM_ADDR, 0, CFG_I2C_EEPROM_ADDR_LEN,
+	ret = i2c_read(CONFIG_SYS_I2C_EEPROM_ADDR, 0, CONFIG_SYS_I2C_EEPROM_ADDR_LEN,
 		(void *)&e, sizeof(e));
 
-#ifdef CFG_EEPROM_BUS_NUM
+#ifdef CONFIG_SYS_EEPROM_BUS_NUM
 	i2c_set_bus_num(bus);
 #endif
 
@@ -188,12 +188,12 @@ static int prog_eeprom(void)
 	int ret, i, length;
 	unsigned int crc;
 	void *p;
-#ifdef CFG_EEPROM_BUS_NUM
+#ifdef CONFIG_SYS_EEPROM_BUS_NUM
 	unsigned int bus;
 #endif
 
 	/* Set the reserved values to 0xFF   */
-#ifdef CFG_I2C_EEPROM_NXID
+#ifdef CONFIG_SYS_I2C_EEPROM_NXID
 	e.res_0 = 0xFF;
 	memset(e.res_1, 0xFF, sizeof(e.res_1));
 #else
@@ -204,20 +204,20 @@ static int prog_eeprom(void)
 	crc = crc32(0, (void *)&e, length - 4);
 	e.crc = cpu_to_be32(crc);
 
-#ifdef CFG_EEPROM_BUS_NUM
+#ifdef CONFIG_SYS_EEPROM_BUS_NUM
 	bus = i2c_get_bus_num();
-	i2c_set_bus_num(CFG_EEPROM_BUS_NUM);
+	i2c_set_bus_num(CONFIG_SYS_EEPROM_BUS_NUM);
 #endif
 
 	for (i = 0, p = &e; i < length; i += 8, p += 8) {
-		ret = i2c_write(CFG_I2C_EEPROM_ADDR, i, CFG_I2C_EEPROM_ADDR_LEN,
+		ret = i2c_write(CONFIG_SYS_I2C_EEPROM_ADDR, i, CONFIG_SYS_I2C_EEPROM_ADDR_LEN,
 			p, min((length - i), 8));
 		if (ret)
 			break;
 		udelay(5000);	/* 5ms write cycle timing */
 	}
 
-#ifdef CFG_EEPROM_BUS_NUM
+#ifdef CONFIG_SYS_EEPROM_BUS_NUM
 	i2c_set_bus_num(bus);
 #endif
 
@@ -343,7 +343,7 @@ int do_mac(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 		strncpy((char *)e.sn, argv[2], sizeof(e.sn) - 1);
 		break;
 	case 'e':	/* errata */
-#ifdef CFG_I2C_EEPROM_NXID
+#ifdef CONFIG_SYS_I2C_EEPROM_NXID
 		memset(e.errata, 0, 5);
 		strncpy((char *)e.errata, argv[2], 4);
 #else
@@ -429,7 +429,7 @@ int mac_read_from_eeprom(void)
 	return 0;
 }
 
-#ifdef CFG_I2C_EEPROM_CCID
+#ifdef CONFIG_SYS_I2C_EEPROM_CCID
 
 /**
  * get_cpu_board_revision - get the CPU board revision on 85xx boards
@@ -439,11 +439,11 @@ int mac_read_from_eeprom(void)
  * This function is called before relocation, so we need to read a private
  * copy of the EEPROM into a local variable on the stack.
  *
- * Also, we assume that CFG_EEPROM_BUS_NUM == CFG_SPD_BUS_NUM.  The global
- * variable i2c_bus_num must be compile-time initialized to CFG_SPD_BUS_NUM,
+ * Also, we assume that CONFIG_SYS_EEPROM_BUS_NUM == CONFIG_SYS_SPD_BUS_NUM.  The global
+ * variable i2c_bus_num must be compile-time initialized to CONFIG_SYS_SPD_BUS_NUM,
  * so that the SPD code will work.  This means that all pre-relocation I2C
- * operations can only occur on the CFG_SPD_BUS_NUM bus.  So if
- * CFG_EEPROM_BUS_NUM != CFG_SPD_BUS_NUM, then we can't read the EEPROM when
+ * operations can only occur on the CONFIG_SYS_SPD_BUS_NUM bus.  So if
+ * CONFIG_SYS_EEPROM_BUS_NUM != CONFIG_SYS_SPD_BUS_NUM, then we can't read the EEPROM when
  * this function is called.  Oh well.
  */
 unsigned int get_cpu_board_revision(void)
@@ -454,7 +454,7 @@ unsigned int get_cpu_board_revision(void)
 		u8 minor;         /* 0x05        Board revision, minor */
 	} be;
 
-	i2c_read(CFG_I2C_EEPROM_ADDR, 0, CFG_I2C_EEPROM_ADDR_LEN,
+	i2c_read(CONFIG_SYS_I2C_EEPROM_ADDR, 0, CONFIG_SYS_I2C_EEPROM_ADDR_LEN,
 		(void *)&be, sizeof(be));
 
 	if (be.id != (('C' << 24) | ('C' << 16) | ('I' << 8) | 'D'))
@@ -463,6 +463,6 @@ unsigned int get_cpu_board_revision(void)
 	if ((be.major == 0xff) && (be.minor == 0xff))
 		return MPC85XX_CPU_BOARD_REV(0, 0);
 
-	return MPC85XX_CPU_BOARD_REV(e.major, e.minor);
+	return MPC85XX_CPU_BOARD_REV(be.major, be.minor);
 }
 #endif
diff --git a/board/freescale/m52277evb/config.mk b/board/freescale/m52277evb/config.mk
index ce014edca..b42fcc94c 100644
--- a/board/freescale/m52277evb/config.mk
+++ b/board/freescale/m52277evb/config.mk
@@ -22,4 +22,6 @@
 # MA 02111-1307 USA
 #
 
-TEXT_BASE = 0
+sinclude $(OBJTREE)/board/$(BOARDDIR)/config.tmp
+
+PLATFORM_CPPFLAGS += -DTEXT_BASE=$(TEXT_BASE)
diff --git a/board/freescale/m52277evb/m52277evb.c b/board/freescale/m52277evb/m52277evb.c
index e5f47d2d9..9109edb37 100644
--- a/board/freescale/m52277evb/m52277evb.c
+++ b/board/freescale/m52277evb/m52277evb.c
@@ -38,10 +38,20 @@ int checkboard(void)
 
 phys_size_t initdram(int board_type)
 {
+	u32 dramsize;
+
+#ifdef CONFIG_CF_SBF
+	/*
+	 * Serial Boot: The dram is already initialized in start.S
+	 * only require to return DRAM size
+	 */
+	dramsize = CONFIG_SYS_SDRAM_SIZE * 0x100000;
+#else
 	volatile sdramc_t *sdram = (volatile sdramc_t *)(MMAP_SDRAM);
-	u32 dramsize, i;
+	volatile gpio_t *gpio = (volatile gpio_t *)(MMAP_GPIO);
+	u32 i;
 
-	dramsize = CFG_SDRAM_SIZE * 0x100000;
+	dramsize = CONFIG_SYS_SDRAM_SIZE * 0x100000;
 
 	for (i = 0x13; i < 0x20; i++) {
 		if (dramsize == (1 << i))
@@ -49,31 +59,39 @@ phys_size_t initdram(int board_type)
 	}
 	i--;
 
-	sdram->sdcs0 = (CFG_SDRAM_BASE | i);
+	gpio->mscr_sdram = CONFIG_SYS_SDRAM_DRV_STRENGTH;
 
-	sdram->sdcfg1 = CFG_SDRAM_CFG1;
-	sdram->sdcfg2 = CFG_SDRAM_CFG2;
+	sdram->sdcs0 = (CONFIG_SYS_SDRAM_BASE | i);
+
+	sdram->sdcfg1 = CONFIG_SYS_SDRAM_CFG1;
+	sdram->sdcfg2 = CONFIG_SYS_SDRAM_CFG2;
 
 	/* Issue PALL */
-	sdram->sdcr = CFG_SDRAM_CTRL | 2;
+	sdram->sdcr = CONFIG_SYS_SDRAM_CTRL | 2;
+	__asm__("nop");
 
 	/* Issue LEMR */
-	/*sdram->sdmr = CFG_SDRAM_EMOD; */
-	sdram->sdmr = CFG_SDRAM_MODE;
+	sdram->sdmr = CONFIG_SYS_SDRAM_MODE;
+	__asm__("nop");
+	sdram->sdmr = CONFIG_SYS_SDRAM_EMOD;
+	__asm__("nop");
 
 	udelay(1000);
 
 	/* Issue PALL */
-	sdram->sdcr = CFG_SDRAM_CTRL | 2;
+	sdram->sdcr = CONFIG_SYS_SDRAM_CTRL | 2;
+	__asm__("nop");
 
 	/* Perform two refresh cycles */
-	sdram->sdcr = CFG_SDRAM_CTRL | 4;
-	sdram->sdcr = CFG_SDRAM_CTRL | 4;
+	sdram->sdcr = CONFIG_SYS_SDRAM_CTRL | 4;
+	__asm__("nop");
+	sdram->sdcr = CONFIG_SYS_SDRAM_CTRL | 4;
+	__asm__("nop");
 
-	sdram->sdcr = (CFG_SDRAM_CTRL & ~0x80000000) | 0x10000c00;
+	sdram->sdcr = (CONFIG_SYS_SDRAM_CTRL & ~0x80000000) | 0x10000C00;
 
 	udelay(100);
-
+#endif
 	return (dramsize);
 };
 
diff --git a/board/freescale/m52277evb/u-boot.lds b/board/freescale/m52277evb/u-boot.spa
index 098e9d346..7ae70d455 100644
--- a/board/freescale/m52277evb/u-boot.lds
+++ b/board/freescale/m52277evb/u-boot.spa
@@ -63,7 +63,7 @@ SECTIONS
     common/main.o		(.text)
 
     . = DEFINED(env_offset) ? env_offset : .;
-    common/environment.o	(.text)
+    common/env_embedded.o	(.text)
 
     *(.text)
     *(.fixup)
diff --git a/board/freescale/m52277evb/u-boot.stm b/board/freescale/m52277evb/u-boot.stm
new file mode 100644
index 000000000..03ff53296
--- /dev/null
+++ b/board/freescale/m52277evb/u-boot.stm
@@ -0,0 +1,136 @@
+/*
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(m68k)
+/* Do we need any of these for elf?
+   __DYNAMIC = 0;    */
+SECTIONS
+{
+  /* Read-only sections, merged into text segment: */
+  . = + SIZEOF_HEADERS;
+  .interp : { *(.interp) }
+  .hash          : { *(.hash)		}
+  .dynsym        : { *(.dynsym)		}
+  .dynstr        : { *(.dynstr)		}
+  .rel.text      : { *(.rel.text)		}
+  .rela.text     : { *(.rela.text) 	}
+  .rel.data      : { *(.rel.data)		}
+  .rela.data     : { *(.rela.data) 	}
+  .rel.rodata    : { *(.rel.rodata) 	}
+  .rela.rodata   : { *(.rela.rodata) 	}
+  .rel.got       : { *(.rel.got)		}
+  .rela.got      : { *(.rela.got)		}
+  .rel.ctors     : { *(.rel.ctors)	}
+  .rela.ctors    : { *(.rela.ctors)	}
+  .rel.dtors     : { *(.rel.dtors)	}
+  .rela.dtors    : { *(.rela.dtors)	}
+  .rel.bss       : { *(.rel.bss)		}
+  .rela.bss      : { *(.rela.bss)		}
+  .rel.plt       : { *(.rel.plt)		}
+  .rela.plt      : { *(.rela.plt)		}
+  .init          : { *(.init)	}
+  .plt : { *(.plt) }
+  .text      :
+  {
+    /* WARNING - the following is hand-optimized to fit within	*/
+    /* the sector layout of our flash chips!	XXX FIXME XXX	*/
+
+    cpu/mcf5227x/start.o		(.text)
+
+    *(.text)
+    *(.fixup)
+    *(.got1)
+  }
+  _etext = .;
+  PROVIDE (etext = .);
+  .rodata    :
+  {
+    *(.rodata)
+    *(.rodata1)
+  }
+  .fini      : { *(.fini)    } =0
+  .ctors     : { *(.ctors)   }
+  .dtors     : { *(.dtors)   }
+
+  /* Read-write section, merged into data segment: */
+  . = (. + 0x00FF) & 0xFFFFFF00;
+  _erotext = .;
+  PROVIDE (erotext = .);
+
+  .reloc   :
+  {
+    __got_start = .;
+    *(.got)
+    __got_end = .;
+    _GOT2_TABLE_ = .;
+    *(.got2)
+    _FIXUP_TABLE_ = .;
+    *(.fixup)
+  }
+  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
+  __fixup_entries = (. - _FIXUP_TABLE_)>>2;
+
+  .data    :
+  {
+    *(.data)
+    *(.data1)
+    *(.sdata)
+    *(.sdata2)
+    *(.dynamic)
+    CONSTRUCTORS
+  }
+  _edata  =  .;
+  PROVIDE (edata = .);
+
+  . = .;
+  __u_boot_cmd_start = .;
+  .u_boot_cmd : { *(.u_boot_cmd) }
+  __u_boot_cmd_end = .;
+
+
+  . = .;
+  __start___ex_table = .;
+  __ex_table : { *(__ex_table) }
+  __stop___ex_table = .;
+
+  . = ALIGN(256);
+  __init_begin = .;
+  .text.init : { *(.text.init) }
+  .data.init : { *(.data.init) }
+  . = ALIGN(256);
+  __init_end = .;
+
+  __bss_start = .;
+  .bss       :
+  {
+   _sbss = .;
+   *(.sbss) *(.scommon)
+   *(.dynbss)
+   *(.bss)
+   *(COMMON)
+   . = ALIGN(4);
+   _ebss = .;
+  }
+  _end = . ;
+  PROVIDE (end = .);
+}
diff --git a/board/freescale/m5235evb/Makefile b/board/freescale/m5235evb/Makefile
index 74c252869..981763d20 100644
--- a/board/freescale/m5235evb/Makefile
+++ b/board/freescale/m5235evb/Makefile
@@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk
 
 LIB	= $(obj)lib$(BOARD).a
 
-COBJS	= $(BOARD).o mii.o
+COBJS	= $(BOARD).o
 
 SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
 OBJS	:= $(addprefix $(obj),$(COBJS))
diff --git a/board/freescale/m5235evb/m5235evb.c b/board/freescale/m5235evb/m5235evb.c
index bd8a4e5e6..b9e61269c 100644
--- a/board/freescale/m5235evb/m5235evb.c
+++ b/board/freescale/m5235evb/m5235evb.c
@@ -57,7 +57,7 @@ phys_size_t initdram(int board_type)
 	    GPIO_PAR_SDRAM_SDWE | GPIO_PAR_SDRAM_SCAS | GPIO_PAR_SDRAM_SRAS |
 	    GPIO_PAR_SDRAM_SCKE | GPIO_PAR_SDRAM_SDCS(3);
 
-	dramsize = CFG_SDRAM_SIZE * 0x100000;
+	dramsize = CONFIG_SYS_SDRAM_SIZE * 0x100000;
 	for (i = 0x13; i < 0x20; i++) {
 		if (dramsize == (1 << i))
 			break;
@@ -65,7 +65,7 @@ phys_size_t initdram(int board_type)
 	i--;
 
 	if (!(sdram->dacr0 & SDRAMC_DARCn_RE)) {
-		dramclk = gd->bus_clk / (CFG_HZ * CFG_HZ);
+		dramclk = gd->bus_clk / (CONFIG_SYS_HZ * CONFIG_SYS_HZ);
 
 		/* Initialize DRAM Control Register: DCR */
 		sdram->dcr = SDRAMC_DCR_RTIM_9CLKS |
@@ -73,7 +73,7 @@ phys_size_t initdram(int board_type)
 
 		/* Initialize DACR0 */
 		sdram->dacr0 =
-		    SDRAMC_DARCn_BA(CFG_SDRAM_BASE) | SDRAMC_DARCn_CASL_C1 |
+		    SDRAMC_DARCn_BA(CONFIG_SYS_SDRAM_BASE) | SDRAMC_DARCn_CASL_C1 |
 		    SDRAMC_DARCn_CBM_CMD20 | SDRAMC_DARCn_PS_32;
 		asm("nop");
 
@@ -90,7 +90,7 @@ phys_size_t initdram(int board_type)
 		}
 
 		/* Write to this block to initiate precharge */
-		*(u32 *) (CFG_SDRAM_BASE) = 0xA5A59696;
+		*(u32 *) (CONFIG_SYS_SDRAM_BASE) = 0xA5A59696;
 
 		/*  Set RE (bit 15) in DACR */
 		sdram->dacr0 |= SDRAMC_DARCn_RE;
@@ -105,7 +105,7 @@ phys_size_t initdram(int board_type)
 		asm("nop");
 
 		/* Write to the SDRAM Mode Register */
-		*(u32 *) (CFG_SDRAM_BASE + 0x400) = 0xA5A59696;
+		*(u32 *) (CONFIG_SYS_SDRAM_BASE + 0x400) = 0xA5A59696;
 	}
 
 	return dramsize;
diff --git a/board/freescale/m5235evb/mii.c b/board/freescale/m5235evb/mii.c
deleted file mode 100644
index 1fd4d99c1..000000000
--- a/board/freescale/m5235evb/mii.c
+++ /dev/null
@@ -1,307 +0,0 @@
-/*
- * Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
- * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/fec.h>
-#include <asm/immap.h>
-
-#include <config.h>
-#include <net.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#if defined(CONFIG_CMD_NET) && defined(CONFIG_NET_MULTI)
-#undef MII_DEBUG
-#undef ET_DEBUG
-
-int fecpin_setclear(struct eth_device *dev, int setclear)
-{
-	volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO;
-
-	if (setclear) {
-		gpio->par_feci2c |=
-		    (GPIO_PAR_FECI2C_EMDC_FECEMDC | GPIO_PAR_FECI2C_EMDIO_FECEMDIO);
-	} else {
-		gpio->par_feci2c &=
-		    ~(GPIO_PAR_FECI2C_EMDC_MASK | GPIO_PAR_FECI2C_EMDIO_MASK);
-	}
-
-	return 0;
-}
-
-#if defined(CFG_DISCOVER_PHY) || defined(CONFIG_MII)
-#include <miiphy.h>
-
-/* Make MII read/write commands for the FEC. */
-#define mk_mii_read(ADDR, REG)	(0x60020000 | ((ADDR << 23) | (REG & 0x1f) << 18))
-
-#define mk_mii_write(ADDR, REG, VAL)	(0x50020000 | ((ADDR << 23) | (REG & 0x1f) << 18) | (VAL & 0xffff))
-
-/* PHY identification */
-#define PHY_ID_LXT970		0x78100000	/* LXT970 */
-#define PHY_ID_LXT971		0x001378e0	/* LXT971 and 972 */
-#define PHY_ID_82555		0x02a80150	/* Intel 82555 */
-#define PHY_ID_QS6612		0x01814400	/* QS6612 */
-#define PHY_ID_AMD79C784	0x00225610	/* AMD 79C784 */
-#define PHY_ID_LSI80225		0x0016f870	/* LSI 80225 */
-#define PHY_ID_LSI80225B	0x0016f880	/* LSI 80225/B */
-#define PHY_ID_DP83848VV	0x20005C90	/* National 83848 */
-#define PHY_ID_DP83849		0x20005CA2	/* National 82849 */
-#define PHY_ID_KS8721BL		0x00221619	/* Micrel KS8721BL/SL */
-
-#define STR_ID_LXT970		"LXT970"
-#define STR_ID_LXT971		"LXT971"
-#define STR_ID_82555		"Intel82555"
-#define STR_ID_QS6612		"QS6612"
-#define STR_ID_AMD79C784	"AMD79C784"
-#define STR_ID_LSI80225		"LSI80225"
-#define STR_ID_LSI80225B	"LSI80225/B"
-#define STR_ID_DP83848VV	"N83848"
-#define STR_ID_DP83849		"N83849"
-#define STR_ID_KS8721BL		"KS8721BL"
-
-/****************************************************************************
- * mii_init -- Initialize the MII for MII command without ethernet
- * This function is a subset of eth_init
- ****************************************************************************
- */
-void mii_reset(struct fec_info_s *info)
-{
-	volatile fec_t *fecp = (fec_t *) (info->miibase);
-	int i;
-
-	fecp->ecr = FEC_ECR_RESET;
-	for (i = 0; (fecp->ecr & FEC_ECR_RESET) && (i < FEC_RESET_DELAY); ++i) {
-		udelay(1);
-	}
-	if (i == FEC_RESET_DELAY) {
-		printf("FEC_RESET_DELAY timeout\n");
-	}
-}
-
-/* send command to phy using mii, wait for result */
-uint mii_send(uint mii_cmd)
-{
-	struct fec_info_s *info;
-	struct eth_device *dev;
-	volatile fec_t *ep;
-	uint mii_reply;
-	int j = 0;
-
-	/* retrieve from register structure */
-	dev = eth_get_dev();
-	info = dev->priv;
-
-	ep = (fec_t *) info->miibase;
-
-	ep->mmfr = mii_cmd;	/* command to phy */
-
-	/* wait for mii complete */
-	while (!(ep->eir & FEC_EIR_MII) && (j < MCFFEC_TOUT_LOOP)) {
-		udelay(1);
-		j++;
-	}
-	if (j >= MCFFEC_TOUT_LOOP) {
-		printf("MII not complete\n");
-		return -1;
-	}
-
-	mii_reply = ep->mmfr;	/* result from phy */
-	ep->eir = FEC_EIR_MII;	/* clear MII complete */
-#ifdef ET_DEBUG
-	printf("%s[%d] %s: sent=0x%8.8x, reply=0x%8.8x\n",
-	       __FILE__, __LINE__, __FUNCTION__, mii_cmd, mii_reply);
-#endif
-
-	return (mii_reply & 0xffff);	/* data read from phy */
-}
-#endif				/* CFG_DISCOVER_PHY || (CONFIG_MII) */
-
-#if defined(CFG_DISCOVER_PHY)
-int mii_discover_phy(struct eth_device *dev)
-{
-#define MAX_PHY_PASSES 11
-	struct fec_info_s *info = dev->priv;
-	int phyaddr, pass;
-	uint phyno, phytype;
-
-	if (info->phyname_init)
-		return info->phy_addr;
-
-	phyaddr = -1;		/* didn't find a PHY yet */
-	for (pass = 1; pass <= MAX_PHY_PASSES && phyaddr < 0; ++pass) {
-		if (pass > 1) {
-			/* PHY may need more time to recover from reset.
-			 * The LXT970 needs 50ms typical, no maximum is
-			 * specified, so wait 10ms before try again.
-			 * With 11 passes this gives it 100ms to wake up.
-			 */
-			udelay(10000);	/* wait 10ms */
-		}
-
-		for (phyno = 0; phyno < 32 && phyaddr < 0; ++phyno) {
-
-			phytype = mii_send(mk_mii_read(phyno, PHY_PHYIDR1));
-#ifdef ET_DEBUG
-			printf("PHY type 0x%x pass %d type\n", phytype, pass);
-#endif
-			if (phytype != 0xffff) {
-				phyaddr = phyno;
-				phytype <<= 16;
-				phytype |=
-				    mii_send(mk_mii_read(phyno, PHY_PHYIDR2));
-
-				switch (phytype & 0xffffffff) {
-				case PHY_ID_KS8721BL:
-					strcpy(info->phy_name,
-					       STR_ID_KS8721BL);
-					info->phyname_init = 1;
-					break;
-				default:
-					strcpy(info->phy_name, "unknown");
-					info->phyname_init = 1;
-					break;
-				}
-
-#ifdef ET_DEBUG
-				printf("PHY @ 0x%x pass %d type ", phyno, pass);
-				switch (phytype & 0xffffffff) {
-				case PHY_ID_KS8721BL:
-					printf(STR_ID_KS8721BL);
-					break;
-				default:
-					printf("0x%08x\n", phytype);
-					break;
-				}
-#endif
-			}
-		}
-	}
-	if (phyaddr < 0)
-		printf("No PHY device found.\n");
-
-	return phyaddr;
-}
-#endif				/* CFG_DISCOVER_PHY */
-
-void mii_init(void) __attribute__((weak,alias("__mii_init")));
-
-void __mii_init(void)
-{
-	volatile fec_t *fecp;
-	struct fec_info_s *info;
-	struct eth_device *dev;
-	int miispd = 0, i = 0;
-	u16 autoneg = 0;
-
-	/* retrieve from register structure */
-	dev = eth_get_dev();
-	info = dev->priv;
-
-	fecp = (fec_t *) info->miibase;
-
-	fecpin_setclear(dev, 1);
-
-	mii_reset(info);
-
-	/* We use strictly polling mode only */
-	fecp->eimr = 0;
-
-	/* Clear any pending interrupt */
-	fecp->eir = 0xffffffff;
-
-	/* Set MII speed */
-	miispd = (gd->bus_clk / 1000000) / 5;
-	fecp->mscr = miispd << 1;
-
-	info->phy_addr = mii_discover_phy(dev);
-
-#define AUTONEGLINK		(PHY_BMSR_AUTN_COMP | PHY_BMSR_LS)
-	while (i < MCFFEC_TOUT_LOOP) {
-		autoneg = 0;
-		miiphy_read(dev->name, info->phy_addr, PHY_BMSR, &autoneg);
-		i++;
-
-		if ((autoneg & AUTONEGLINK) == AUTONEGLINK)
-			break;
-
-		udelay(500);
-	}
-	if (i >= MCFFEC_TOUT_LOOP) {
-		printf("Auto Negotiation not complete\n");
-	}
-
-	/* adapt to the half/full speed settings */
-	info->dup_spd = miiphy_duplex(dev->name, info->phy_addr) << 16;
-	info->dup_spd |= miiphy_speed(dev->name, info->phy_addr);
-}
-
-/*****************************************************************************
- * Read and write a MII PHY register, routines used by MII Utilities
- *
- * FIXME: These routines are expected to return 0 on success, but mii_send
- *	  does _not_ return an error code. Maybe 0xFFFF means error, i.e.
- *	  no PHY connected...
- *	  For now always return 0.
- * FIXME: These routines only work after calling eth_init() at least once!
- *	  Otherwise they hang in mii_send() !!! Sorry!
- *****************************************************************************/
-
-int mcffec_miiphy_read(char *devname, unsigned char addr, unsigned char reg,
-		       unsigned short *value)
-{
-	short rdreg;		/* register working value */
-
-#ifdef MII_DEBUG
-	printf("miiphy_read(0x%x) @ 0x%x = ", reg, addr);
-#endif
-	rdreg = mii_send(mk_mii_read(addr, reg));
-
-	*value = rdreg;
-
-#ifdef MII_DEBUG
-	printf("0x%04x\n", *value);
-#endif
-
-	return 0;
-}
-
-int mcffec_miiphy_write(char *devname, unsigned char addr, unsigned char reg,
-			unsigned short value)
-{
-	short rdreg;		/* register working value */
-
-#ifdef MII_DEBUG
-	printf("miiphy_write(0x%x) @ 0x%x = ", reg, addr);
-#endif
-
-	rdreg = mii_send(mk_mii_write(addr, reg, value));
-
-#ifdef MII_DEBUG
-	printf("0x%04x\n", value);
-#endif
-
-	return 0;
-}
-
-#endif				/* CONFIG_CMD_NET, FEC_ENET & NET_MULTI */
diff --git a/board/freescale/m5235evb/u-boot.16 b/board/freescale/m5235evb/u-boot.16
index 4ca026fc5..c13488437 100644
--- a/board/freescale/m5235evb/u-boot.16
+++ b/board/freescale/m5235evb/u-boot.16
@@ -63,7 +63,7 @@ SECTIONS
     lib_generic/zlib.o		(.text)
 
     . = DEFINED(env_offset) ? env_offset : .;
-    common/environment.o	(.text)
+    common/env_embedded.o	(.text)
 
     *(.text)
     *(.fixup)
diff --git a/board/freescale/m5235evb/u-boot.32 b/board/freescale/m5235evb/u-boot.32
index eeffdfb4e..53c337df8 100644
--- a/board/freescale/m5235evb/u-boot.32
+++ b/board/freescale/m5235evb/u-boot.32
@@ -71,7 +71,7 @@ SECTIONS
     lib_generic/libgeneric.a	(.text)
 
     . = DEFINED(env_offset) ? env_offset : .;
-    common/environment.o	(.text)
+    common/env_embedded.o	(.text)
 
     *(.text)
     *(.fixup)
diff --git a/board/freescale/m5249evb/m5249evb.c b/board/freescale/m5249evb/m5249evb.c
index c9ed341bb..b1ccbebde 100644
--- a/board/freescale/m5249evb/m5249evb.c
+++ b/board/freescale/m5249evb/m5249evb.c
@@ -42,7 +42,7 @@ int checkboard (void) {
 	/*
 	 * Set LED on
 	 */
-	val = mbar2_readLong(MCFSIM_GPIO1_OUT) & ~CFG_GPIO1_LED;
+	val = mbar2_readLong(MCFSIM_GPIO1_OUT) & ~CONFIG_SYS_GPIO1_LED;
 	mbar2_writeLong(MCFSIM_GPIO1_OUT, val);   /* Set LED on */
 
 	return 0;
@@ -57,13 +57,13 @@ phys_size_t initdram (int board_type) {
 	 *	RC = ([(RefreshTime/#rows) / (1/BusClk)] / 16) - 1
 	 */
 
-#ifdef CFG_FAST_CLK
+#ifdef CONFIG_SYS_FAST_CLK
 	/*
 	 * Busclk=70MHz, RefreshTime=64ms, #rows=4096 (4K)
 	 * SO=1, NAM=0, COC=0, RTIM=01 (6clk refresh), RC=39
 	 */
 	mbar_writeShort(MCFSIM_DCR, 0x8239);
-#elif CFG_PLL_BYPASS
+#elif CONFIG_SYS_PLL_BYPASS
 	/*
 	 * Busclk=5.6448MHz, RefreshTime=64ms, #rows=8192 (8K)
 	 * SO=1, NAM=0, COC=0, RTIM=01 (6clk refresh), RC=02
@@ -101,7 +101,7 @@ phys_size_t initdram (int board_type) {
 	mbar_writeLong(MCFSIM_DACR0, 0x0000b364);  /* Enable DACR0[IMRS] (bit 6); RE remains enabled */
 	*((volatile unsigned long *) 0x800) = junk; /* Access RAM to initialize the mode register */
 
-	return CFG_SDRAM_SIZE * 1024 * 1024;
+	return CONFIG_SYS_SDRAM_SIZE * 1024 * 1024;
 };
 
 
diff --git a/board/freescale/m5249evb/u-boot.lds b/board/freescale/m5249evb/u-boot.lds
index afdb7202c..aec7e9bf4 100644
--- a/board/freescale/m5249evb/u-boot.lds
+++ b/board/freescale/m5249evb/u-boot.lds
@@ -62,7 +62,7 @@ SECTIONS
     lib_generic/zlib.o		(.text)
 
     . = DEFINED(env_offset) ? env_offset : .;
-    common/environment.o	(.text)
+    common/env_embedded.o	(.text)
 
     *(.text)
     *(.fixup)
diff --git a/board/freescale/m5253demo/flash.c b/board/freescale/m5253demo/flash.c
index 1bf1e9759..08f767d10 100644
--- a/board/freescale/m5253demo/flash.c
+++ b/board/freescale/m5253demo/flash.c
@@ -28,7 +28,7 @@
 
 #include <asm/immap.h>
 
-#ifndef CFG_FLASH_CFI
+#ifndef CONFIG_SYS_FLASH_CFI
 typedef unsigned short FLASH_PORT_WIDTH;
 typedef volatile unsigned short FLASH_PORT_WIDTHV;
 
@@ -49,14 +49,14 @@ int flash_get_offsets(ulong base, flash_info_t * info);
 int write_word(flash_info_t * info, FPWV * dest, u16 data);
 void inline spin_wheel(void);
 
-flash_info_t flash_info[CFG_MAX_FLASH_BANKS];
+flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];
 
 ulong flash_init(void)
 {
 	ulong size = 0;
 	ulong fbase = 0;
 
-	fbase = (ulong) CFG_FLASH_BASE;
+	fbase = (ulong) CONFIG_SYS_FLASH_BASE;
 	flash_get_size((FPWV *) fbase, &flash_info[0]);
 	flash_get_offsets((ulong) fbase, &flash_info[0]);
 	fbase += flash_info[0].size;
@@ -64,8 +64,8 @@ ulong flash_init(void)
 
 	/* Protect monitor and environment sectors */
 	flash_protect(FLAG_PROTECT_SET,
-		      CFG_MONITOR_BASE,
-		      CFG_MONITOR_BASE + monitor_flash_len - 1, &flash_info[0]);
+		      CONFIG_SYS_MONITOR_BASE,
+		      CONFIG_SYS_MONITOR_BASE + monitor_flash_len - 1, &flash_info[0]);
 
 	return size;
 }
@@ -77,8 +77,8 @@ int flash_get_offsets(ulong base, flash_info_t * info)
 	if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) {
 
 		info->start[0] = base;
-		for (k = 0, j = 0; j < CFG_SST_SECT; j++, k++) {
-			info->start[k + 1] = info->start[k] + CFG_SST_SECTSZ;
+		for (k = 0, j = 0; j < CONFIG_SYS_SST_SECT; j++, k++) {
+			info->start[k + 1] = info->start[k] + CONFIG_SYS_SST_SECTSZ;
 			info->protect[k] = 0;
 		}
 	}
@@ -174,16 +174,16 @@ ulong flash_get_size(FPWV * addr, flash_info_t * info)
 
 	info->sector_count = 0;
 	info->size = 0;
-	info->sector_count = CFG_SST_SECT;
-	info->size = CFG_SST_SECT * CFG_SST_SECTSZ;
+	info->sector_count = CONFIG_SYS_SST_SECT;
+	info->size = CONFIG_SYS_SST_SECT * CONFIG_SYS_SST_SECTSZ;
 
 	/* reset ID mode */
 	*addr = (FPWV) 0x00F000F0;
 
-	if (info->sector_count > CFG_MAX_FLASH_SECT) {
+	if (info->sector_count > CONFIG_SYS_MAX_FLASH_SECT) {
 		printf("** ERROR: sector count %d > max (%d) **\n",
-		       info->sector_count, CFG_MAX_FLASH_SECT);
-		info->sector_count = CFG_MAX_FLASH_SECT;
+		       info->sector_count, CONFIG_SYS_MAX_FLASH_SECT);
+		info->sector_count = CONFIG_SYS_MAX_FLASH_SECT;
 	}
 
 	return (info->size);
@@ -235,7 +235,7 @@ int flash_erase(flash_info_t * info, int s_first, int s_last)
 	start = get_timer(0);
 	last = start;
 
-	if ((s_last - s_first) == (CFG_SST_SECT - 1)) {
+	if ((s_last - s_first) == (CONFIG_SYS_SST_SECT - 1)) {
 		if (prot == 0) {
 			addr = (FPWV *) info->start[0];
 
@@ -255,7 +255,7 @@ int flash_erase(flash_info_t * info, int s_first, int s_last)
 					count = 0;
 				}
 
-				if (get_timer(start) > CFG_FLASH_ERASE_TOUT) {
+				if (get_timer(start) > CONFIG_SYS_FLASH_ERASE_TOUT) {
 					printf("Timeout\n");
 					*addr = 0x00F0;	/* reset to read mode */
 
@@ -271,7 +271,7 @@ int flash_erase(flash_info_t * info, int s_first, int s_last)
 				enable_interrupts();
 
 			return 0;
-		} else if (prot == CFG_SST_SECT) {
+		} else if (prot == CONFIG_SYS_SST_SECT) {
 			return 1;
 		}
 	}
@@ -294,7 +294,7 @@ int flash_erase(flash_info_t * info, int s_first, int s_last)
 
 					flag = disable_interrupts();
 
-					base = (FPWV *) (CFG_FLASH_BASE);	/* First sector */
+					base = (FPWV *) (CONFIG_SYS_FLASH_BASE);	/* First sector */
 
 					base[FLASH_CYCLE1] = 0x00AA;	/* unlock */
 					base[FLASH_CYCLE2] = 0x0055;	/* unlock */
@@ -308,7 +308,7 @@ int flash_erase(flash_info_t * info, int s_first, int s_last)
 
 					while ((*addr & 0x0080) != 0x0080) {
 						if (get_timer(start) >
-						    CFG_FLASH_ERASE_TOUT) {
+						    CONFIG_SYS_FLASH_ERASE_TOUT) {
 							printf("Timeout\n");
 							*addr = 0x00F0;	/* reset to read mode */
 
@@ -424,7 +424,7 @@ int write_word(flash_info_t * info, FPWV * dest, u16 data)
 		return (2);
 	}
 
-	base = (FPWV *) (CFG_FLASH_BASE);
+	base = (FPWV *) (CONFIG_SYS_FLASH_BASE);
 
 	/* Disable interrupts which might cause a timeout here */
 	flag = disable_interrupts();
@@ -444,7 +444,7 @@ int write_word(flash_info_t * info, FPWV * dest, u16 data)
 	/* data polling for D7 */
 	while (res == 0
 	       && (*dest & (u8) 0x00800080) != (data & (u8) 0x00800080)) {
-		if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+		if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
 			*dest = (u8) 0x00F000F0;	/* reset bank */
 			res = 1;
 		}
diff --git a/board/freescale/m5253demo/m5253demo.c b/board/freescale/m5253demo/m5253demo.c
index 2eb6a0444..b39cd4d7a 100644
--- a/board/freescale/m5253demo/m5253demo.c
+++ b/board/freescale/m5253demo/m5253demo.c
@@ -45,7 +45,7 @@ phys_size_t initdram(int board_type)
 	if (!(mbar_readLong(MCFSIM_DCR) & 0x8000)) {
 		u32 RC, temp;
 
-		RC = (CFG_CLK / 1000000) >> 1;
+		RC = (CONFIG_SYS_CLK / 1000000) >> 1;
 		RC = (RC * 15) >> 4;
 
 		/* Initialize DRAM Control Register: DCR */
@@ -56,7 +56,7 @@ phys_size_t initdram(int board_type)
 		__asm__("nop");
 
 		/* Initialize DMR0 */
-		dramsize = (CFG_SDRAM_SIZE << 20);
+		dramsize = (CONFIG_SYS_SDRAM_SIZE << 20);
 		temp = (dramsize - 1) & 0xFFFC0000;
 		mbar_writeLong(MCFSIM_DMR0, temp | 1);
 		__asm__("nop");
@@ -65,7 +65,7 @@ phys_size_t initdram(int board_type)
 		__asm__("nop");
 
 		/* Write to this block to initiate precharge */
-		*(u32 *) (CFG_SDRAM_BASE) = 0xa5a5a5a5;
+		*(u32 *) (CONFIG_SYS_SDRAM_BASE) = 0xa5a5a5a5;
 		__asm__("nop");
 
 		/* Set RE bit in DACR */
@@ -81,7 +81,7 @@ phys_size_t initdram(int board_type)
 			       mbar_readLong(MCFSIM_DACR0) | 0x0040);
 		__asm__("nop");
 
-		*(u32 *) (CFG_SDRAM_BASE + 0x800) = 0xa5a5a5a5;
+		*(u32 *) (CONFIG_SYS_SDRAM_BASE + 0x800) = 0xa5a5a5a5;
 	}
 
 	return dramsize;
@@ -104,7 +104,7 @@ int ide_preinit(void)
 
 void ide_set_reset(int idereset)
 {
-	volatile atac_t *ata = (atac_t *) CFG_ATA_BASE_ADDR;
+	volatile atac_t *ata = (atac_t *) CONFIG_SYS_ATA_BASE_ADDR;
 	long period;
 	/*  t1,  t2,  t3,  t4,  t5,  t6,  t9, tRD,  tA */
 	int piotms[5][9] = { {70, 165, 60, 30, 50, 5, 20, 0, 35},	/* PIO 0 */
@@ -121,7 +121,7 @@ void ide_set_reset(int idereset)
 		mbar2_writeLong(CIM_MISCCR, CIM_MISCCR_CPUEND);
 
 #define CALC_TIMING(t) (t + period - 1) / period
-		period = 1000000000 / (CFG_CLK / 2);	/* period in ns */
+		period = 1000000000 / (CONFIG_SYS_CLK / 2);	/* period in ns */
 
 		/*ata->ton = CALC_TIMING (180); */
 		ata->t1 = CALC_TIMING(piotms[2][0]);
diff --git a/board/freescale/m5253demo/u-boot.lds b/board/freescale/m5253demo/u-boot.lds
index 4bdea5ed5..a29576457 100644
--- a/board/freescale/m5253demo/u-boot.lds
+++ b/board/freescale/m5253demo/u-boot.lds
@@ -62,7 +62,7 @@ SECTIONS
     lib_generic/zlib.o		(.text)
 
     . = DEFINED(env_offset) ? env_offset : .;
-    common/environment.o	(.text)
+    common/env_embedded.o	(.text)
 
 
     *(.text)
diff --git a/board/freescale/m5253evbe/m5253evbe.c b/board/freescale/m5253evbe/m5253evbe.c
index f3b1efdb2..ae69f67b4 100644
--- a/board/freescale/m5253evbe/m5253evbe.c
+++ b/board/freescale/m5253evbe/m5253evbe.c
@@ -43,7 +43,7 @@ phys_size_t initdram(int board_type)
 	if (!(mbar_readLong(MCFSIM_DCR) & 0x8000)) {
 		u32 RC, dramsize;
 
-		RC = (CFG_CLK / 1000000) >> 1;
+		RC = (CONFIG_SYS_CLK / 1000000) >> 1;
 		RC = (RC * 15) >> 4;
 
 		/* Initialize DRAM Control Register: DCR */
@@ -54,7 +54,7 @@ phys_size_t initdram(int board_type)
 		asm("nop");
 
 		/* Initialize DMR0 */
-		dramsize = ((CFG_SDRAM_SIZE << 20) - 1) & 0xFFFC0000;
+		dramsize = ((CONFIG_SYS_SDRAM_SIZE << 20) - 1) & 0xFFFC0000;
 		mbar_writeLong(MCFSIM_DMR0, dramsize | 1);
 		asm("nop");
 
@@ -62,7 +62,7 @@ phys_size_t initdram(int board_type)
 		asm("nop");
 
 		/* Write to this block to initiate precharge */
-		*(u32 *) (CFG_SDRAM_BASE) = 0xa5a5a5a5;
+		*(u32 *) (CONFIG_SYS_SDRAM_BASE) = 0xa5a5a5a5;
 		asm("nop");
 
 		/* Set RE bit in DACR */
@@ -78,10 +78,10 @@ phys_size_t initdram(int board_type)
 			       mbar_readLong(MCFSIM_DACR0) | 0x0040);
 		asm("nop");
 
-		*(u32 *) (CFG_SDRAM_BASE + 0x800) = 0xa5a5a5a5;
+		*(u32 *) (CONFIG_SYS_SDRAM_BASE + 0x800) = 0xa5a5a5a5;
 	}
 
-	return CFG_SDRAM_SIZE * 1024 * 1024;
+	return CONFIG_SYS_SDRAM_SIZE * 1024 * 1024;
 }
 
 int testdram(void)
@@ -101,7 +101,7 @@ int ide_preinit(void)
 
 void ide_set_reset(int idereset)
 {
-	volatile atac_t *ata = (atac_t *) CFG_ATA_BASE_ADDR;
+	volatile atac_t *ata = (atac_t *) CONFIG_SYS_ATA_BASE_ADDR;
 	long period;
 	/*  t1,  t2,  t3,  t4,  t5,  t6,  t9, tRD,  tA */
 	int piotms[5][9] = { {70, 165, 60, 30, 50, 5, 20, 0, 35},	/* PIO 0 */
@@ -118,7 +118,7 @@ void ide_set_reset(int idereset)
 		mbar2_writeLong(CIM_MISCCR, CIM_MISCCR_CPUEND);
 
 #define CALC_TIMING(t) (t + period - 1) / period
-		period = 1000000000 / (CFG_CLK / 2);	/* period in ns */
+		period = 1000000000 / (CONFIG_SYS_CLK / 2);	/* period in ns */
 
 		/*ata->ton = CALC_TIMING (180); */
 		ata->t1 = CALC_TIMING(piotms[2][0]);
diff --git a/board/freescale/m5253evbe/u-boot.lds b/board/freescale/m5253evbe/u-boot.lds
index 6d225f528..239cf95e5 100644
--- a/board/freescale/m5253evbe/u-boot.lds
+++ b/board/freescale/m5253evbe/u-boot.lds
@@ -62,7 +62,7 @@ SECTIONS
     lib_generic/zlib.o		(.text)
 
     . = DEFINED(env_offset) ? env_offset : .;
-    common/environment.o	(.text)
+    common/env_embedded.o	(.text)
 
     *(.text)
     *(.fixup)
diff --git a/board/freescale/m5271evb/Makefile b/board/freescale/m5271evb/Makefile
index 2ec71ee1d..424ab1cf9 100644
--- a/board/freescale/m5271evb/Makefile
+++ b/board/freescale/m5271evb/Makefile
@@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk
 
 LIB	= $(obj)lib$(BOARD).a
 
-COBJS	= $(BOARD).o mii.o
+COBJS	= $(BOARD).o
 
 SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
 OBJS	:= $(addprefix $(obj),$(COBJS))
diff --git a/board/freescale/m5271evb/m5271evb.c b/board/freescale/m5271evb/m5271evb.c
index e089d5f02..5505cc42c 100644
--- a/board/freescale/m5271evb/m5271evb.c
+++ b/board/freescale/m5271evb/m5271evb.c
@@ -66,7 +66,7 @@ phys_size_t initdram (int board_type) {
 		 * PS: 32bit port size
 		 */
 		mbar_writeLong(MCF_SDRAMC_DACR0,
-				MCF_SDRAMC_DACRn_BA(CFG_SDRAM_BASE>>18)
+				MCF_SDRAMC_DACRn_BA(CONFIG_SYS_SDRAM_BASE>>18)
 				| MCF_SDRAMC_DACRn_CASL(1)
 				| MCF_SDRAMC_DACRn_CBM(3)
 				| MCF_SDRAMC_DACRn_PS(0));
@@ -85,7 +85,7 @@ phys_size_t initdram (int board_type) {
 			asm(" nop");
 
 		/* Write to this block to initiate precharge */
-		*(u32 *)(CFG_SDRAM_BASE) = 0xa5a5a5a5;
+		*(u32 *)(CONFIG_SYS_SDRAM_BASE) = 0xa5a5a5a5;
 
 		/* Set RE bit in DACR */
 		mbar_writeLong(MCF_SDRAMC_DACR0, mbar_readLong(MCF_SDRAMC_DACR0)
@@ -108,10 +108,10 @@ phys_size_t initdram (int board_type) {
 		 * Burst Type = Sequential
 		 * Burst Length = 1
 		 */
-		*(u32 *)(CFG_SDRAM_BASE + 0x400) = 0xa5a5a5a5;
+		*(u32 *)(CONFIG_SYS_SDRAM_BASE + 0x400) = 0xa5a5a5a5;
 	}
 
-	return CFG_SDRAM_SIZE * 1024 * 1024;
+	return CONFIG_SYS_SDRAM_SIZE * 1024 * 1024;
 };
 
 int testdram (void) {
diff --git a/board/freescale/m5271evb/u-boot.lds b/board/freescale/m5271evb/u-boot.lds
index c07d02383..0bc7fa1ab 100644
--- a/board/freescale/m5271evb/u-boot.lds
+++ b/board/freescale/m5271evb/u-boot.lds
@@ -63,7 +63,7 @@ SECTIONS
     lib_generic/zlib.o		(.text)
 
     . = DEFINED(env_offset) ? env_offset : .;
-    common/environment.o	(.ppcenv)
+    common/env_embedded.o	(.ppcenv)
 
     *(.text)
     *(.fixup)
diff --git a/board/freescale/m5272c3/Makefile b/board/freescale/m5272c3/Makefile
index be704b76f..424ab1cf9 100644
--- a/board/freescale/m5272c3/Makefile
+++ b/board/freescale/m5272c3/Makefile
@@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk
 
 LIB	= $(obj)lib$(BOARD).a
 
-COBJS	= $(BOARD).o flash.o mii.o
+COBJS	= $(BOARD).o
 
 SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
 OBJS	:= $(addprefix $(obj),$(COBJS))
diff --git a/board/freescale/m5272c3/flash.c b/board/freescale/m5272c3/flash.c
deleted file mode 100644
index ea0b1fd7e..000000000
--- a/board/freescale/m5272c3/flash.c
+++ /dev/null
@@ -1,378 +0,0 @@
-/*
- * (C) Copyright 2000-2003
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-
-#define PHYS_FLASH_1 CFG_FLASH_BASE
-#define FLASH_BANK_SIZE 0x200000
-
-flash_info_t flash_info[CFG_MAX_FLASH_BANKS];
-
-void flash_print_info (flash_info_t * info)
-{
-	int i;
-
-	switch (info->flash_id & FLASH_VENDMASK) {
-	case (AMD_MANUFACT & FLASH_VENDMASK):
-		printf ("AMD: ");
-		break;
-	default:
-		printf ("Unknown Vendor ");
-		break;
-	}
-
-	switch (info->flash_id & FLASH_TYPEMASK) {
-	case (AMD_ID_PL160CB & FLASH_TYPEMASK):
-		printf ("AM29PL160CB (16Mbit)\n");
-		break;
-	default:
-		printf ("Unknown Chip Type\n");
-		goto Done;
-		break;
-	}
-
-	printf ("  Size: %ld MB in %d Sectors\n",
-		info->size >> 20, info->sector_count);
-
-	printf ("  Sector Start Addresses:");
-	for (i = 0; i < info->sector_count; i++) {
-		if ((i % 5) == 0) {
-			printf ("\n   ");
-		}
-		printf (" %08lX%s", info->start[i],
-			info->protect[i] ? " (RO)" : "     ");
-	}
-	printf ("\n");
-
-      Done:
-	return;
-}
-
-
-unsigned long flash_init (void)
-{
-	int i, j;
-	ulong size = 0;
-
-	for (i = 0; i < CFG_MAX_FLASH_BANKS; i++) {
-		ulong flashbase = 0;
-
-		flash_info[i].flash_id =
-			(AMD_MANUFACT & FLASH_VENDMASK) |
-			(AMD_ID_PL160CB & FLASH_TYPEMASK);
-		flash_info[i].size = FLASH_BANK_SIZE;
-		flash_info[i].sector_count = CFG_MAX_FLASH_SECT;
-		memset (flash_info[i].protect, 0, CFG_MAX_FLASH_SECT);
-		if (i == 0)
-			flashbase = PHYS_FLASH_1;
-		else
-			panic ("configured to many flash banks!\n");
-
-		for (j = 0; j < flash_info[i].sector_count; j++) {
-			if (j == 0) {
-				/* 1st is 16 KiB */
-				flash_info[i].start[j] = flashbase;
-			}
-			if ((j >= 1) && (j <= 2)) {
-				/* 2nd and 3rd are 8 KiB */
-				flash_info[i].start[j] =
-					flashbase + 0x4000 + 0x2000 * (j - 1);
-			}
-			if (j == 3) {
-				/* 4th is 224 KiB */
-				flash_info[i].start[j] = flashbase + 0x8000;
-			}
-			if ((j >= 4) && (j <= 10)) {
-				/* rest is 256 KiB */
-				flash_info[i].start[j] =
-					flashbase + 0x40000 + 0x40000 * (j -
-									 4);
-			}
-		}
-		size += flash_info[i].size;
-	}
-
-	flash_protect (FLAG_PROTECT_SET,
-		       CFG_FLASH_BASE,
-		       CFG_FLASH_BASE + 0x3ffff, &flash_info[0]);
-
-	return size;
-}
-
-
-#define CMD_READ_ARRAY		0x00F0
-#define CMD_UNLOCK1		0x00AA
-#define CMD_UNLOCK2		0x0055
-#define CMD_ERASE_SETUP		0x0080
-#define CMD_ERASE_CONFIRM	0x0030
-#define CMD_PROGRAM		0x00A0
-#define CMD_UNLOCK_BYPASS	0x0020
-
-#define MEM_FLASH_ADDR1		(*(volatile u16 *)(CFG_FLASH_BASE + (0x00000555<<1)))
-#define MEM_FLASH_ADDR2		(*(volatile u16 *)(CFG_FLASH_BASE + (0x000002AA<<1)))
-
-#define BIT_ERASE_DONE		0x0080
-#define BIT_RDY_MASK		0x0080
-#define BIT_PROGRAM_ERROR	0x0020
-#define BIT_TIMEOUT		0x80000000	/* our flag */
-
-#define READY 1
-#define ERR   2
-#define TMO   4
-
-
-int flash_erase (flash_info_t * info, int s_first, int s_last)
-{
-	ulong result;
-	int iflag, cflag, prot, sect;
-	int rc = ERR_OK;
-	int chip1;
-
-	/* first look for protection bits */
-
-	if (info->flash_id == FLASH_UNKNOWN)
-		return ERR_UNKNOWN_FLASH_TYPE;
-
-	if ((s_first < 0) || (s_first > s_last)) {
-		return ERR_INVAL;
-	}
-
-	if ((info->flash_id & FLASH_VENDMASK) !=
-	    (AMD_MANUFACT & FLASH_VENDMASK)) {
-		return ERR_UNKNOWN_FLASH_VENDOR;
-	}
-
-	prot = 0;
-	for (sect = s_first; sect <= s_last; ++sect) {
-		if (info->protect[sect]) {
-			prot++;
-		}
-	}
-	if (prot)
-		return ERR_PROTECTED;
-
-	/*
-	 * Disable interrupts which might cause a timeout
-	 * here. Remember that our exception vectors are
-	 * at address 0 in the flash, and we don't want a
-	 * (ticker) exception to happen while the flash
-	 * chip is in programming mode.
-	 */
-
-	cflag = icache_status ();
-	icache_disable ();
-	iflag = disable_interrupts ();
-
-	printf ("\n");
-
-	/* Start erase on unprotected sectors */
-	for (sect = s_first; sect <= s_last && !ctrlc (); sect++) {
-		printf ("Erasing sector %2d ... ", sect);
-
-		/* arm simple, non interrupt dependent timer */
-		set_timer (0);
-
-		if (info->protect[sect] == 0) {	/* not protected */
-			volatile u16 *addr =
-				(volatile u16 *) (info->start[sect]);
-
-			MEM_FLASH_ADDR1 = CMD_UNLOCK1;
-			MEM_FLASH_ADDR2 = CMD_UNLOCK2;
-			MEM_FLASH_ADDR1 = CMD_ERASE_SETUP;
-
-			MEM_FLASH_ADDR1 = CMD_UNLOCK1;
-			MEM_FLASH_ADDR2 = CMD_UNLOCK2;
-			*addr = CMD_ERASE_CONFIRM;
-
-			/* wait until flash is ready */
-			chip1 = 0;
-
-			do {
-				result = *addr;
-
-				/* check timeout */
-				if (get_timer (0) > CFG_FLASH_ERASE_TOUT) {
-					MEM_FLASH_ADDR1 = CMD_READ_ARRAY;
-					chip1 = TMO;
-					break;
-				}
-
-				if (!chip1
-				    && (result & 0xFFFF) & BIT_ERASE_DONE)
-					chip1 = READY;
-
-			} while (!chip1);
-
-			MEM_FLASH_ADDR1 = CMD_READ_ARRAY;
-
-			if (chip1 == ERR) {
-				rc = ERR_PROG_ERROR;
-				goto outahere;
-			}
-			if (chip1 == TMO) {
-				rc = ERR_TIMOUT;
-				goto outahere;
-			}
-
-			printf ("ok.\n");
-		} else {	/* it was protected */
-
-			printf ("protected!\n");
-		}
-	}
-
-	if (ctrlc ())
-		printf ("User Interrupt!\n");
-
-      outahere:
-	/* allow flash to settle - wait 10 ms */
-	udelay (10000);
-
-	if (iflag)
-		enable_interrupts ();
-
-	if (cflag)
-		icache_enable ();
-
-	return rc;
-}
-
-static int write_word (flash_info_t * info, ulong dest, ulong data)
-{
-	volatile u16 *addr = (volatile u16 *) dest;
-	ulong result;
-	int rc = ERR_OK;
-	int cflag, iflag;
-	int chip1;
-
-	/*
-	 * Check if Flash is (sufficiently) erased
-	 */
-	result = *addr;
-	if ((result & data) != data)
-		return ERR_NOT_ERASED;
-
-
-	/*
-	 * Disable interrupts which might cause a timeout
-	 * here. Remember that our exception vectors are
-	 * at address 0 in the flash, and we don't want a
-	 * (ticker) exception to happen while the flash
-	 * chip is in programming mode.
-	 */
-
-	cflag = icache_status ();
-	icache_disable ();
-	iflag = disable_interrupts ();
-
-	MEM_FLASH_ADDR1 = CMD_UNLOCK1;
-	MEM_FLASH_ADDR2 = CMD_UNLOCK2;
-	MEM_FLASH_ADDR1 = CMD_PROGRAM;
-	*addr = data;
-
-	/* arm simple, non interrupt dependent timer */
-	set_timer (0);
-
-	/* wait until flash is ready */
-	chip1 = 0;
-	do {
-		result = *addr;
-
-		/* check timeout */
-		if (get_timer (0) > CFG_FLASH_ERASE_TOUT) {
-			chip1 = ERR | TMO;
-			break;
-		}
-		if (!chip1 && ((result & 0x80) == (data & 0x80)))
-			chip1 = READY;
-
-	} while (!chip1);
-
-	*addr = CMD_READ_ARRAY;
-
-	if (chip1 == ERR || *addr != data)
-		rc = ERR_PROG_ERROR;
-
-	if (iflag)
-		enable_interrupts ();
-
-	if (cflag)
-		icache_enable ();
-
-	return rc;
-}
-
-
-int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
-{
-	ulong wp, data;
-	int rc;
-
-	if (addr & 1) {
-		printf ("unaligned destination not supported\n");
-		return ERR_ALIGN;
-	}
-
-#if 0
-	if (cnt & 1) {
-		printf ("odd transfer sizes not supported\n");
-		return ERR_ALIGN;
-	}
-#endif
-
-	wp = addr;
-
-	if (addr & 1) {
-		data = (*((volatile u8 *) addr) << 8) | *((volatile u8 *)
-							  src);
-		if ((rc = write_word (info, wp - 1, data)) != 0) {
-			return (rc);
-		}
-		src += 1;
-		wp += 1;
-		cnt -= 1;
-	}
-
-	while (cnt >= 2) {
-		data = *((volatile u16 *) src);
-		if ((rc = write_word (info, wp, data)) != 0) {
-			return (rc);
-		}
-		src += 2;
-		wp += 2;
-		cnt -= 2;
-	}
-
-	if (cnt == 1) {
-		data = (*((volatile u8 *) src) << 8) |
-			*((volatile u8 *) (wp + 1));
-		if ((rc = write_word (info, wp, data)) != 0) {
-			return (rc);
-		}
-		src += 1;
-		wp += 1;
-		cnt -= 1;
-	}
-
-	return ERR_OK;
-}
diff --git a/board/freescale/m5272c3/m5272c3.c b/board/freescale/m5272c3/m5272c3.c
index d17cb2ef9..902ca3aac 100644
--- a/board/freescale/m5272c3/m5272c3.c
+++ b/board/freescale/m5272c3/m5272c3.c
@@ -40,7 +40,7 @@ phys_size_t initdram (int board_type) {
 	/* Dummy write to start SDRAM */
 	*((volatile unsigned long *)0) = 0;
 
-	return CFG_SDRAM_SIZE * 1024 * 1024;
+	return CONFIG_SYS_SDRAM_SIZE * 1024 * 1024;
 	};
 
 int testdram (void) {
diff --git a/board/freescale/m5272c3/mii.c b/board/freescale/m5272c3/mii.c
deleted file mode 100644
index b30ba803f..000000000
--- a/board/freescale/m5272c3/mii.c
+++ /dev/null
@@ -1,303 +0,0 @@
-/*
- * Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
- * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/fec.h>
-#include <asm/immap.h>
-
-#include <config.h>
-#include <net.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#if defined(CONFIG_CMD_NET) && defined(CONFIG_NET_MULTI)
-#undef MII_DEBUG
-#undef ET_DEBUG
-
-int fecpin_setclear(struct eth_device *dev, int setclear)
-{
-	volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO;
-
-	if (setclear) {
-		gpio->gpio_pbcnt |= GPIO_PBCNT_E_MDC | GPIO_PBCNT_E_RXER | GPIO_PBCNT_E_RXD1 | GPIO_PBCNT_E_RXD2 | GPIO_PBCNT_E_RXD3 | GPIO_PBCNT_E_TXD1 | GPIO_PBCNT_E_TXD2 | GPIO_PBCNT_E_TXD3;
-	} else {
-	}
-	return 0;
-}
-
-#if defined(CFG_DISCOVER_PHY) || defined(CONFIG_CMD_MII)
-#include <miiphy.h>
-
-/* Make MII read/write commands for the FEC. */
-#define mk_mii_read(ADDR, REG)	(0x60020000 | ((ADDR << 23) | (REG & 0x1f) << 18))
-
-#define mk_mii_write(ADDR, REG, VAL)	(0x50020000 | ((ADDR << 23) | (REG & 0x1f) << 18) | (VAL & 0xffff))
-
-/* PHY identification */
-#define PHY_ID_LXT970		0x78100000	/* LXT970 */
-#define PHY_ID_LXT971		0x001378e0	/* LXT971 and 972 */
-#define PHY_ID_82555		0x02a80150	/* Intel 82555 */
-#define PHY_ID_QS6612		0x01814400	/* QS6612 */
-#define PHY_ID_AMD79C784	0x00225610	/* AMD 79C784 */
-#define PHY_ID_AMD79C874VC	0x0022561B	/* AMD 79C874 */
-#define PHY_ID_LSI80225		0x0016f870	/* LSI 80225 */
-#define PHY_ID_LSI80225B	0x0016f880	/* LSI 80225/B */
-#define PHY_ID_DP83848VV	0x20005C90	/* National 83848 */
-#define PHY_ID_DP83849		0x20005CA2	/* National 82849 */
-
-#define STR_ID_LXT970		"LXT970"
-#define STR_ID_LXT971		"LXT971"
-#define STR_ID_82555		"Intel82555"
-#define STR_ID_QS6612		"QS6612"
-#define STR_ID_AMD79C784	"AMD79C784"
-#define STR_ID_AMD79C874VC	"AMD79C874VC"
-#define STR_ID_LSI80225		"LSI80225"
-#define STR_ID_LSI80225B	"LSI80225/B"
-#define STR_ID_DP83848VV	"N83848"
-#define STR_ID_DP83849		"N83849"
-
-/****************************************************************************
- * mii_init -- Initialize the MII for MII command without ethernet
- * This function is a subset of eth_init
- ****************************************************************************
- */
-void mii_reset(struct fec_info_s *info)
-{
-	volatile fec_t *fecp = (fec_t *) (info->miibase);
-	int i;
-
-	fecp->ecr = FEC_ECR_RESET;
-	for (i = 0; (fecp->ecr & FEC_ECR_RESET) && (i < FEC_RESET_DELAY); ++i) {
-		udelay(1);
-	}
-	if (i == FEC_RESET_DELAY) {
-		printf("FEC_RESET_DELAY timeout\n");
-	}
-}
-
-/* send command to phy using mii, wait for result */
-uint mii_send(uint mii_cmd)
-{
-	struct fec_info_s *info;
-	struct eth_device *dev;
-	volatile fec_t *ep;
-	uint mii_reply;
-	int j = 0;
-
-	/* retrieve from register structure */
-	dev = eth_get_dev();
-	info = dev->priv;
-
-	ep = (fec_t *) info->miibase;
-
-	ep->mmfr = mii_cmd;	/* command to phy */
-
-	/* wait for mii complete */
-	while (!(ep->eir & FEC_EIR_MII) && (j < MCFFEC_TOUT_LOOP)) {
-		udelay(1);
-		j++;
-	}
-	if (j >= MCFFEC_TOUT_LOOP) {
-		printf("MII not complete\n");
-		return -1;
-	}
-
-	mii_reply = ep->mmfr;	/* result from phy */
-	ep->eir = FEC_EIR_MII;	/* clear MII complete */
-#ifdef ET_DEBUG
-	printf("%s[%d] %s: sent=0x%8.8x, reply=0x%8.8x\n",
-	       __FILE__, __LINE__, __FUNCTION__, mii_cmd, mii_reply);
-#endif
-
-	return (mii_reply & 0xffff);	/* data read from phy */
-}
-#endif				/* CFG_DISCOVER_PHY || CONFIG_CMD_MII */
-
-#if defined(CFG_DISCOVER_PHY)
-int mii_discover_phy(struct eth_device *dev)
-{
-#define MAX_PHY_PASSES 11
-	struct fec_info_s *info = dev->priv;
-	int phyaddr, pass;
-	uint phyno, phytype;
-
-	if (info->phyname_init)
-		return info->phy_addr;
-
-	phyaddr = -1;		/* didn't find a PHY yet */
-	for (pass = 1; pass <= MAX_PHY_PASSES && phyaddr < 0; ++pass) {
-		if (pass > 1) {
-			/* PHY may need more time to recover from reset.
-			 * The LXT970 needs 50ms typical, no maximum is
-			 * specified, so wait 10ms before try again.
-			 * With 11 passes this gives it 100ms to wake up.
-			 */
-			udelay(10000);	/* wait 10ms */
-		}
-
-		for (phyno = 0; phyno < 32 && phyaddr < 0; ++phyno) {
-
-			phytype = mii_send(mk_mii_read(phyno, PHY_PHYIDR1));
-#ifdef ET_DEBUG
-			printf("PHY type 0x%x pass %d type\n", phytype, pass);
-#endif
-			if (phytype != 0xffff) {
-				phyaddr = phyno;
-				phytype <<= 16;
-				phytype |=
-				    mii_send(mk_mii_read(phyno, PHY_PHYIDR2));
-
-				switch (phytype & 0xffffffff) {
-				case PHY_ID_AMD79C874VC:
-					strcpy(info->phy_name,
-					       STR_ID_AMD79C874VC);
-					info->phyname_init = 1;
-					break;
-				default:
-					strcpy(info->phy_name, "unknown");
-					info->phyname_init = 1;
-					break;
-				}
-
-#ifdef ET_DEBUG
-				printf("PHY @ 0x%x pass %d type ", phyno, pass);
-				switch (phytype & 0xffffffff) {
-				case PHY_ID_AMD79C874VC:
-					printf(STR_ID_AMD79C874VC);
-					break;
-				default:
-					printf("0x%08x\n", phytype);
-					break;
-				}
-#endif
-			}
-		}
-	}
-	if (phyaddr < 0)
-		printf("No PHY device found.\n");
-
-	return phyaddr;
-}
-#endif				/* CFG_DISCOVER_PHY */
-
-void mii_init(void) __attribute__((weak,alias("__mii_init")));
-
-void __mii_init(void)
-{
-	volatile fec_t *fecp;
-	struct fec_info_s *info;
-	struct eth_device *dev;
-	int miispd = 0, i = 0;
-	u16 autoneg = 0;
-
-	/* retrieve from register structure */
-	dev = eth_get_dev();
-	info = dev->priv;
-
-	fecp = (fec_t *) info->miibase;
-
-	fecpin_setclear(dev, 1);
-
-	mii_reset(info);
-
-	/* We use strictly polling mode only */
-	fecp->eimr = 0;
-
-	/* Clear any pending interrupt */
-	fecp->eir = 0xffffffff;
-
-	/* Set MII speed */
-	miispd = (gd->bus_clk / 1000000) / 5;
-	fecp->mscr = miispd << 1;
-
-	info->phy_addr = mii_discover_phy(dev);
-
-#define AUTONEGLINK		(PHY_BMSR_AUTN_COMP | PHY_BMSR_LS)
-	while (i < MCFFEC_TOUT_LOOP) {
-		autoneg = 0;
-		miiphy_read(dev->name, info->phy_addr, PHY_BMSR, &autoneg);
-		i++;
-
-		if ((autoneg & AUTONEGLINK) == AUTONEGLINK)
-			break;
-
-		udelay(500);
-	}
-	if (i >= MCFFEC_TOUT_LOOP) {
-		printf("Auto Negotiation not complete\n");
-	}
-
-	/* adapt to the half/full speed settings */
-	info->dup_spd = miiphy_duplex(dev->name, info->phy_addr) << 16;
-	info->dup_spd |= miiphy_speed(dev->name, info->phy_addr);
-}
-
-/*****************************************************************************
- * Read and write a MII PHY register, routines used by MII Utilities
- *
- * FIXME: These routines are expected to return 0 on success, but mii_send
- *	  does _not_ return an error code. Maybe 0xFFFF means error, i.e.
- *	  no PHY connected...
- *	  For now always return 0.
- * FIXME: These routines only work after calling eth_init() at least once!
- *	  Otherwise they hang in mii_send() !!! Sorry!
- *****************************************************************************/
-
-int mcffec_miiphy_read(char *devname, unsigned char addr, unsigned char reg,
-		       unsigned short *value)
-{
-	short rdreg;		/* register working value */
-
-#ifdef MII_DEBUG
-	printf("miiphy_read(0x%x) @ 0x%x = ", reg, addr);
-#endif
-	rdreg = mii_send(mk_mii_read(addr, reg));
-
-	*value = rdreg;
-
-#ifdef MII_DEBUG
-	printf("0x%04x\n", *value);
-#endif
-
-	return 0;
-}
-
-int mcffec_miiphy_write(char *devname, unsigned char addr, unsigned char reg,
-			unsigned short value)
-{
-	short rdreg;		/* register working value */
-
-#ifdef MII_DEBUG
-	printf("miiphy_write(0x%x) @ 0x%x = ", reg, addr);
-#endif
-
-	rdreg = mii_send(mk_mii_write(addr, reg, value));
-
-#ifdef MII_DEBUG
-	printf("0x%04x\n", value);
-#endif
-
-	return 0;
-}
-
-#endif				/* CONFIG_CMD_NET, FEC_ENET & NET_MULTI */
diff --git a/board/freescale/m5272c3/u-boot.lds b/board/freescale/m5272c3/u-boot.lds
index 8420c91a7..e5c7b67c6 100644
--- a/board/freescale/m5272c3/u-boot.lds
+++ b/board/freescale/m5272c3/u-boot.lds
@@ -62,7 +62,7 @@ SECTIONS
     lib_generic/zlib.o		(.text)
 
     . = DEFINED(env_offset) ? env_offset : .;
-    common/environment.o	(.text)
+    common/env_embedded.o	(.text)
 
     *(.text)
     *(.fixup)
diff --git a/board/freescale/m5275evb/Makefile b/board/freescale/m5275evb/Makefile
index 74c252869..981763d20 100644
--- a/board/freescale/m5275evb/Makefile
+++ b/board/freescale/m5275evb/Makefile
@@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk
 
 LIB	= $(obj)lib$(BOARD).a
 
-COBJS	= $(BOARD).o mii.o
+COBJS	= $(BOARD).o
 
 SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
 OBJS	:= $(addprefix $(obj),$(COBJS))
diff --git a/board/freescale/m5275evb/m5275evb.c b/board/freescale/m5275evb/m5275evb.c
index be19e0275..35c9b2018 100644
--- a/board/freescale/m5275evb/m5275evb.c
+++ b/board/freescale/m5275evb/m5275evb.c
@@ -44,7 +44,7 @@ phys_size_t initdram(int board_type)
 	gpio_reg->par_sdram = 0x3FF; /* Enable SDRAM */
 
 	/* Set up chip select */
-	sdp->sdbar0 = CFG_SDRAM_BASE;
+	sdp->sdbar0 = CONFIG_SYS_SDRAM_BASE;
 	sdp->sdbmr0 = MCF_SDRAMC_SDMRn_BAM_32M | MCF_SDRAMC_SDMRn_V;
 
 	/* Set up timing */
@@ -58,34 +58,34 @@ phys_size_t initdram(int board_type)
 	sdp->sdcr |= MCF_SDRAMC_SDCR_IPALL;
 
 	/* Dummy write to start SDRAM */
-	*((volatile unsigned long *)CFG_SDRAM_BASE) = 0xa5a59696;
+	*((volatile unsigned long *)CONFIG_SYS_SDRAM_BASE) = 0xa5a59696;
 
 	/* Send LEMR */
 	sdp->sdmr = MCF_SDRAMC_SDMR_BNKAD_LEMR
 			| MCF_SDRAMC_SDMR_AD(0x0)
 			| MCF_SDRAMC_SDMR_CMD;
-	*((volatile unsigned long *)CFG_SDRAM_BASE) = 0xa5a59696;
+	*((volatile unsigned long *)CONFIG_SYS_SDRAM_BASE) = 0xa5a59696;
 
 	/* Send LMR */
 	sdp->sdmr = 0x058d0000;
-	*((volatile unsigned long *)CFG_SDRAM_BASE) = 0xa5a59696;
+	*((volatile unsigned long *)CONFIG_SYS_SDRAM_BASE) = 0xa5a59696;
 
 	/* Stop sending commands */
 	sdp->sdmr &= ~(MCF_SDRAMC_SDMR_CMD);
 
 	/* Set precharge */
 	sdp->sdcr |= MCF_SDRAMC_SDCR_IPALL;
-	*((volatile unsigned long *)CFG_SDRAM_BASE) = 0xa5a59696;
+	*((volatile unsigned long *)CONFIG_SYS_SDRAM_BASE) = 0xa5a59696;
 
 	/* Stop manual precharge, send 2 IREF */
 	sdp->sdcr &= ~(MCF_SDRAMC_SDCR_IPALL);
 	sdp->sdcr |= MCF_SDRAMC_SDCR_IREF;
-	*((volatile unsigned long *)CFG_SDRAM_BASE) = 0xa5a59696;
-	*((volatile unsigned long *)CFG_SDRAM_BASE) = 0xa5a59696;
+	*((volatile unsigned long *)CONFIG_SYS_SDRAM_BASE) = 0xa5a59696;
+	*((volatile unsigned long *)CONFIG_SYS_SDRAM_BASE) = 0xa5a59696;
 
 	/* Write mode register, clear reset DLL */
 	sdp->sdmr = 0x018d0000;
-	*((volatile unsigned long *)CFG_SDRAM_BASE) = 0xa5a59696;
+	*((volatile unsigned long *)CONFIG_SYS_SDRAM_BASE) = 0xa5a59696;
 
 	/* Stop sending commands */
 	sdp->sdmr &= ~(MCF_SDRAMC_SDMR_CMD);
@@ -100,7 +100,7 @@ phys_size_t initdram(int board_type)
 		| MCF_SDRAMC_SDCR_RCNT((SDRAM_TREFI/(PERIOD*64)) - 1 + 1)
 		| MCF_SDRAMC_SDCR_DQS_OE(0x3);
 
-	return CFG_SDRAM_SIZE * 1024 * 1024;
+	return CONFIG_SYS_SDRAM_SIZE * 1024 * 1024;
 };
 
 int testdram(void)
diff --git a/board/freescale/m5275evb/mii.c b/board/freescale/m5275evb/mii.c
deleted file mode 100644
index 6c7ace956..000000000
--- a/board/freescale/m5275evb/mii.c
+++ /dev/null
@@ -1,319 +0,0 @@
-/*
- * Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
- * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/fec.h>
-#include <asm/immap.h>
-
-#include <config.h>
-#include <net.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#if defined(CONFIG_CMD_NET) && defined(CONFIG_NET_MULTI)
-#undef MII_DEBUG
-#undef ET_DEBUG
-
-int fecpin_setclear(struct eth_device *dev, int setclear)
-{
-	struct fec_info_s *info = (struct fec_info_s *) dev->priv;
-	volatile gpio_t *gpio = (gpio_t *)MMAP_GPIO;
-
-	if (setclear) {
-		/* Enable Ethernet pins */
-		if (info->iobase == CFG_FEC0_IOBASE) {
-			gpio->par_feci2c |= 0x0F00;
-			gpio->par_fec0hl |= 0xC0;
-		} else {
-			gpio->par_feci2c |= 0x00A0;
-			gpio->par_fec1hl |= 0xC0;
-		}
-	} else {
-		if (info->iobase == CFG_FEC0_IOBASE) {
-			gpio->par_feci2c &= ~0x0F00;
-			gpio->par_fec0hl &= ~0xC0;
-		} else {
-			gpio->par_feci2c &= ~0x00A0;
-			gpio->par_fec1hl &= ~0xC0;
-		}
-	}
-
-	return 0;
-}
-
-#if defined(CFG_DISCOVER_PHY) || defined(CONFIG_CMD_MII)
-#include <miiphy.h>
-
-/* Make MII read/write commands for the FEC. */
-#define mk_mii_read(ADDR, REG)	(0x60020000 | ((ADDR << 23) | (REG & 0x1f) << 18))
-
-#define mk_mii_write(ADDR, REG, VAL)	(0x50020000 | ((ADDR << 23) | (REG & 0x1f) << 18) | (VAL & 0xffff))
-
-/* PHY identification */
-#define PHY_ID_LXT970		0x78100000	/* LXT970 */
-#define PHY_ID_LXT971		0x001378e0	/* LXT971 and 972 */
-#define PHY_ID_82555		0x02a80150	/* Intel 82555 */
-#define PHY_ID_QS6612		0x01814400	/* QS6612 */
-#define PHY_ID_AMD79C784	0x00225610	/* AMD 79C784 */
-#define PHY_ID_LSI80225		0x0016f870	/* LSI 80225 */
-#define PHY_ID_LSI80225B	0x0016f880	/* LSI 80225/B */
-#define PHY_ID_DP83848VV	0x20005C90	/* National 83848 */
-#define PHY_ID_DP83849		0x20005CA2	/* National 82849 */
-#define PHY_ID_KS8721BL		0x00221619	/* Micrel KS8721BL/SL */
-
-#define STR_ID_LXT970		"LXT970"
-#define STR_ID_LXT971		"LXT971"
-#define STR_ID_82555		"Intel82555"
-#define STR_ID_QS6612		"QS6612"
-#define STR_ID_AMD79C784	"AMD79C784"
-#define STR_ID_LSI80225		"LSI80225"
-#define STR_ID_LSI80225B	"LSI80225/B"
-#define STR_ID_DP83848VV	"N83848"
-#define STR_ID_DP83849		"N83849"
-#define STR_ID_KS8721BL		"KS8721BL"
-
-/****************************************************************************
- * mii_init -- Initialize the MII for MII command without ethernet
- * This function is a subset of eth_init
- ****************************************************************************
- */
-void mii_reset(struct fec_info_s *info)
-{
-	volatile fec_t *fecp = (fec_t *) (info->miibase);
-	int i;
-
-	fecp->ecr = FEC_ECR_RESET;
-	for (i = 0; (fecp->ecr & FEC_ECR_RESET) && (i < FEC_RESET_DELAY); ++i) {
-		udelay(1);
-	}
-	if (i == FEC_RESET_DELAY) {
-		printf("FEC_RESET_DELAY timeout\n");
-	}
-}
-
-/* send command to phy using mii, wait for result */
-uint mii_send(uint mii_cmd)
-{
-	struct fec_info_s *info;
-	struct eth_device *dev;
-	volatile fec_t *ep;
-	uint mii_reply;
-	int j = 0;
-
-	/* retrieve from register structure */
-	dev = eth_get_dev();
-	info = dev->priv;
-
-	ep = (fec_t *) info->miibase;
-
-	ep->mmfr = mii_cmd;	/* command to phy */
-
-	/* wait for mii complete */
-	while (!(ep->eir & FEC_EIR_MII) && (j < MCFFEC_TOUT_LOOP)) {
-		udelay(1);
-		j++;
-	}
-	if (j >= MCFFEC_TOUT_LOOP) {
-		printf("MII not complete\n");
-		return -1;
-	}
-
-	mii_reply = ep->mmfr;	/* result from phy */
-	ep->eir = FEC_EIR_MII;	/* clear MII complete */
-#ifdef ET_DEBUG
-	printf("%s[%d] %s: sent=0x%8.8x, reply=0x%8.8x\n",
-	       __FILE__, __LINE__, __FUNCTION__, mii_cmd, mii_reply);
-#endif
-
-	return (mii_reply & 0xffff);	/* data read from phy */
-}
-#endif	/* CFG_DISCOVER_PHY || (CONFIG_COMMANDS & CONFIG_CMD_MII) */
-
-#if defined(CFG_DISCOVER_PHY)
-int mii_discover_phy(struct eth_device *dev)
-{
-#define MAX_PHY_PASSES 11
-	struct fec_info_s *info = dev->priv;
-	int phyaddr, pass;
-	uint phyno, phytype;
-
-	if (info->phyname_init)
-		return info->phy_addr;
-
-	phyaddr = -1;		/* didn't find a PHY yet */
-	for (pass = 1; pass <= MAX_PHY_PASSES && phyaddr < 0; ++pass) {
-		if (pass > 1) {
-			/* PHY may need more time to recover from reset.
-			 * The LXT970 needs 50ms typical, no maximum is
-			 * specified, so wait 10ms before try again.
-			 * With 11 passes this gives it 100ms to wake up.
-			 */
-			udelay(10000);	/* wait 10ms */
-		}
-
-		for (phyno = 0; phyno < 32 && phyaddr < 0; ++phyno) {
-
-			phytype = mii_send(mk_mii_read(phyno, PHY_PHYIDR1));
-#ifdef ET_DEBUG
-			printf("PHY type 0x%x pass %d type\n", phytype, pass);
-#endif
-			if (phytype != 0xffff) {
-				phyaddr = phyno;
-				phytype <<= 16;
-				phytype |=
-				    mii_send(mk_mii_read(phyno, PHY_PHYIDR2));
-
-				switch (phytype & 0xffffffff) {
-				case PHY_ID_KS8721BL:
-					strcpy(info->phy_name,
-					       STR_ID_KS8721BL);
-					info->phyname_init = 1;
-					break;
-				default:
-					strcpy(info->phy_name, "unknown");
-					info->phyname_init = 1;
-					break;
-				}
-
-#ifdef ET_DEBUG
-				printf("PHY @ 0x%x pass %d type ", phyno, pass);
-				switch (phytype & 0xffffffff) {
-				case PHY_ID_KS8721BL:
-					printf(STR_ID_KS8721BL);
-					break;
-				default:
-					printf("0x%08x\n", phytype);
-					break;
-				}
-#endif
-			}
-		}
-	}
-	if (phyaddr < 0)
-		printf("No PHY device found.\n");
-
-	return phyaddr;
-}
-#endif				/* CFG_DISCOVER_PHY */
-
-void mii_init(void) __attribute__((weak,alias("__mii_init")));
-
-void __mii_init(void)
-{
-	volatile fec_t *fecp;
-	struct fec_info_s *info;
-	struct eth_device *dev;
-	int miispd = 0, i = 0;
-	u16 autoneg = 0;
-
-	/* retrieve from register structure */
-	dev = eth_get_dev();
-	info = dev->priv;
-
-	fecp = (fec_t *) info->miibase;
-
-	fecpin_setclear(dev, 1);
-
-	mii_reset(info);
-
-	/* We use strictly polling mode only */
-	fecp->eimr = 0;
-
-	/* Clear any pending interrupt */
-	fecp->eir = 0xffffffff;
-
-	/* Set MII speed */
-	miispd = (gd->bus_clk / 1000000) / 5;
-	fecp->mscr = miispd << 1;
-
-	info->phy_addr = mii_discover_phy(dev);
-
-#define AUTONEGLINK		(PHY_BMSR_AUTN_COMP | PHY_BMSR_LS)
-	while (i < MCFFEC_TOUT_LOOP) {
-		autoneg = 0;
-		miiphy_read(dev->name, info->phy_addr, PHY_BMSR, &autoneg);
-		i++;
-
-		if ((autoneg & AUTONEGLINK) == AUTONEGLINK)
-			break;
-
-		udelay(500);
-	}
-	if (i >= MCFFEC_TOUT_LOOP) {
-		printf("Auto Negotiation not complete\n");
-	}
-
-	/* adapt to the half/full speed settings */
-	info->dup_spd = miiphy_duplex(dev->name, info->phy_addr) << 16;
-	info->dup_spd |= miiphy_speed(dev->name, info->phy_addr);
-}
-
-/*****************************************************************************
- * Read and write a MII PHY register, routines used by MII Utilities
- *
- * FIXME: These routines are expected to return 0 on success, but mii_send
- *	  does _not_ return an error code. Maybe 0xFFFF means error, i.e.
- *	  no PHY connected...
- *	  For now always return 0.
- * FIXME: These routines only work after calling eth_init() at least once!
- *	  Otherwise they hang in mii_send() !!! Sorry!
- *****************************************************************************/
-
-int mcffec_miiphy_read(char *devname, unsigned char addr, unsigned char reg,
-		       unsigned short *value)
-{
-	short rdreg;		/* register working value */
-
-#ifdef MII_DEBUG
-	printf("miiphy_read(0x%x) @ 0x%x = ", reg, addr);
-#endif
-	rdreg = mii_send(mk_mii_read(addr, reg));
-
-	*value = rdreg;
-
-#ifdef MII_DEBUG
-	printf("0x%04x\n", *value);
-#endif
-
-	return 0;
-}
-
-int mcffec_miiphy_write(char *devname, unsigned char addr, unsigned char reg,
-			unsigned short value)
-{
-	short rdreg;		/* register working value */
-
-#ifdef MII_DEBUG
-	printf("miiphy_write(0x%x) @ 0x%x = ", reg, addr);
-#endif
-
-	rdreg = mii_send(mk_mii_write(addr, reg, value));
-
-#ifdef MII_DEBUG
-	printf("0x%04x\n", value);
-#endif
-
-	return 0;
-}
-
-#endif				/* CONFIG_CMD_NET, FEC_ENET & NET_MULTI */
diff --git a/board/freescale/m5275evb/u-boot.lds b/board/freescale/m5275evb/u-boot.lds
index d810ebc14..a3e03d556 100644
--- a/board/freescale/m5275evb/u-boot.lds
+++ b/board/freescale/m5275evb/u-boot.lds
@@ -61,7 +61,7 @@ SECTIONS
     lib_generic/zlib.o		(.text)
 
     . = DEFINED(env_offset) ? env_offset : .;
-    common/environment.o(.text)
+    common/env_embedded.o(.text)
 
     *(.text)
     *(.fixup)
diff --git a/board/freescale/m5282evb/Makefile b/board/freescale/m5282evb/Makefile
index 2ec71ee1d..424ab1cf9 100644
--- a/board/freescale/m5282evb/Makefile
+++ b/board/freescale/m5282evb/Makefile
@@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk
 
 LIB	= $(obj)lib$(BOARD).a
 
-COBJS	= $(BOARD).o mii.o
+COBJS	= $(BOARD).o
 
 SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
 OBJS	:= $(addprefix $(obj),$(COBJS))
diff --git a/board/freescale/m5282evb/m5282evb.c b/board/freescale/m5282evb/m5282evb.c
index 31d69231a..b0c9fc83f 100644
--- a/board/freescale/m5282evb/m5282evb.c
+++ b/board/freescale/m5282evb/m5282evb.c
@@ -36,7 +36,7 @@ phys_size_t initdram (int board_type)
 {
 	u32 dramsize, i, dramclk;
 
-	dramsize = CFG_SDRAM_SIZE * 0x100000;
+	dramsize = CONFIG_SYS_SDRAM_SIZE * 0x100000;
 	for (i = 0x13; i < 0x20; i++) {
 		if (dramsize == (1 << i))
 			break;
@@ -45,7 +45,7 @@ phys_size_t initdram (int board_type)
 
 	if (!(MCFSDRAMC_DACR0 & MCFSDRAMC_DACR_RE))
 	{
-		dramclk = gd->bus_clk / (CFG_HZ * CFG_HZ);
+		dramclk = gd->bus_clk / (CONFIG_SYS_HZ * CONFIG_SYS_HZ);
 
 		/* Initialize DRAM Control Register: DCR */
 		MCFSDRAMC_DCR = (0
@@ -55,7 +55,7 @@ phys_size_t initdram (int board_type)
 
 		/* Initialize DACR0 */
 		MCFSDRAMC_DACR0 = (0
-			| MCFSDRAMC_DACR_BASE(CFG_SDRAM_BASE)
+			| MCFSDRAMC_DACR_BASE(CONFIG_SYS_SDRAM_BASE)
 			| MCFSDRAMC_DACR_CASL(1)
 			| MCFSDRAMC_DACR_CBM(3)
 			| MCFSDRAMC_DACR_PS_32);
@@ -77,7 +77,7 @@ phys_size_t initdram (int board_type)
 		}
 
 		/* Write to this block to initiate precharge */
-		*(u32 *)(CFG_SDRAM_BASE) = 0xA5A59696;
+		*(u32 *)(CONFIG_SYS_SDRAM_BASE) = 0xA5A59696;
 		asm("nop");
 
 		/* Set RE (bit 15) in DACR */
@@ -94,7 +94,7 @@ phys_size_t initdram (int board_type)
 		asm("nop");
 
 		/* Write to the SDRAM Mode Register */
-		*(u32 *)(CFG_SDRAM_BASE + 0x400) = 0xA5A59696;
+		*(u32 *)(CONFIG_SYS_SDRAM_BASE + 0x400) = 0xA5A59696;
 	}
 	return dramsize;
 }
diff --git a/board/freescale/m5282evb/mii.c b/board/freescale/m5282evb/mii.c
deleted file mode 100644
index 8ae2ec69c..000000000
--- a/board/freescale/m5282evb/mii.c
+++ /dev/null
@@ -1,304 +0,0 @@
-/*
- * Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
- * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/fec.h>
-#include <asm/immap.h>
-
-#include <config.h>
-#include <net.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#if defined(CONFIG_CMD_NET) && defined(CONFIG_NET_MULTI)
-#undef MII_DEBUG
-#undef ET_DEBUG
-
-int fecpin_setclear(struct eth_device *dev, int setclear)
-{
-	if (setclear) {
-		MCFGPIO_PASPAR |= 0x0F00;
-		MCFGPIO_PEHLPAR = CFG_PEHLPAR;
-	} else {
-		MCFGPIO_PASPAR &= 0xF0FF;
-		MCFGPIO_PEHLPAR &= ~CFG_PEHLPAR;
-	}
-	return 0;
-}
-
-#if defined(CFG_DISCOVER_PHY) || defined(CONFIG_CMD_MII)
-#include <miiphy.h>
-
-/* Make MII read/write commands for the FEC. */
-#define mk_mii_read(ADDR, REG)	(0x60020000 | ((ADDR << 23) | (REG & 0x1f) << 18))
-
-#define mk_mii_write(ADDR, REG, VAL)	(0x50020000 | ((ADDR << 23) | (REG & 0x1f) << 18) | (VAL & 0xffff))
-
-/* PHY identification */
-#define PHY_ID_LXT970		0x78100000	/* LXT970 */
-#define PHY_ID_LXT971		0x001378e0	/* LXT971 and 972 */
-#define PHY_ID_82555		0x02a80150	/* Intel 82555 */
-#define PHY_ID_QS6612		0x01814400	/* QS6612 */
-#define PHY_ID_AMD79C784	0x00225610	/* AMD 79C784 */
-#define PHY_ID_AMD79C874VC	0x0022561B	/* AMD 79C874 */
-#define PHY_ID_LSI80225		0x0016f870	/* LSI 80225 */
-#define PHY_ID_LSI80225B	0x0016f880	/* LSI 80225/B */
-#define PHY_ID_DP83848VV	0x20005C90	/* National 83848 */
-#define PHY_ID_DP83849		0x20005CA2	/* National 82849 */
-
-#define STR_ID_LXT970		"LXT970"
-#define STR_ID_LXT971		"LXT971"
-#define STR_ID_82555		"Intel82555"
-#define STR_ID_QS6612		"QS6612"
-#define STR_ID_AMD79C784	"AMD79C784"
-#define STR_ID_AMD79C874VC	"AMD79C874VC"
-#define STR_ID_LSI80225		"LSI80225"
-#define STR_ID_LSI80225B	"LSI80225/B"
-#define STR_ID_DP83848VV	"N83848"
-#define STR_ID_DP83849		"N83849"
-
-/****************************************************************************
- * mii_init -- Initialize the MII for MII command without ethernet
- * This function is a subset of eth_init
- ****************************************************************************
- */
-void mii_reset(struct fec_info_s *info)
-{
-	volatile fec_t *fecp = (fec_t *) (info->miibase);
-	int i;
-
-	fecp->ecr = FEC_ECR_RESET;
-	for (i = 0; (fecp->ecr & FEC_ECR_RESET) && (i < FEC_RESET_DELAY); ++i) {
-		udelay(1);
-	}
-	if (i == FEC_RESET_DELAY) {
-		printf("FEC_RESET_DELAY timeout\n");
-	}
-}
-
-/* send command to phy using mii, wait for result */
-uint mii_send(uint mii_cmd)
-{
-	struct fec_info_s *info;
-	struct eth_device *dev;
-	volatile fec_t *ep;
-	uint mii_reply;
-	int j = 0;
-
-	/* retrieve from register structure */
-	dev = eth_get_dev();
-	info = dev->priv;
-
-	ep = (fec_t *) info->miibase;
-
-	ep->mmfr = mii_cmd;	/* command to phy */
-
-	/* wait for mii complete */
-	while (!(ep->eir & FEC_EIR_MII) && (j < MCFFEC_TOUT_LOOP)) {
-		udelay(1);
-		j++;
-	}
-	if (j >= MCFFEC_TOUT_LOOP) {
-		printf("MII not complete\n");
-		return -1;
-	}
-
-	mii_reply = ep->mmfr;	/* result from phy */
-	ep->eir = FEC_EIR_MII;	/* clear MII complete */
-#ifdef ET_DEBUG
-	printf("%s[%d] %s: sent=0x%8.8x, reply=0x%8.8x\n",
-	       __FILE__, __LINE__, __FUNCTION__, mii_cmd, mii_reply);
-#endif
-
-	return (mii_reply & 0xffff);	/* data read from phy */
-}
-#endif				/* CFG_DISCOVER_PHY || CONFIG_CMD_MII */
-
-#if defined(CFG_DISCOVER_PHY)
-int mii_discover_phy(struct eth_device *dev)
-{
-#define MAX_PHY_PASSES 11
-	struct fec_info_s *info = dev->priv;
-	int phyaddr, pass;
-	uint phyno, phytype;
-
-	if (info->phyname_init)
-		return info->phy_addr;
-
-	phyaddr = -1;		/* didn't find a PHY yet */
-	for (pass = 1; pass <= MAX_PHY_PASSES && phyaddr < 0; ++pass) {
-		if (pass > 1) {
-			/* PHY may need more time to recover from reset.
-			 * The LXT970 needs 50ms typical, no maximum is
-			 * specified, so wait 10ms before try again.
-			 * With 11 passes this gives it 100ms to wake up.
-			 */
-			udelay(10000);	/* wait 10ms */
-		}
-
-		for (phyno = 0; phyno < 32 && phyaddr < 0; ++phyno) {
-
-			phytype = mii_send(mk_mii_read(phyno, PHY_PHYIDR1));
-#ifdef ET_DEBUG
-			printf("PHY type 0x%x pass %d type\n", phytype, pass);
-#endif
-			if (phytype != 0xffff) {
-				phyaddr = phyno;
-				phytype <<= 16;
-				phytype |=
-				    mii_send(mk_mii_read(phyno, PHY_PHYIDR2));
-
-				switch (phytype & 0xffffffff) {
-				case PHY_ID_AMD79C874VC:
-					strcpy(info->phy_name,
-					       STR_ID_AMD79C874VC);
-					info->phyname_init = 1;
-					break;
-				default:
-					strcpy(info->phy_name, "unknown");
-					info->phyname_init = 1;
-					break;
-				}
-
-#ifdef ET_DEBUG
-				printf("PHY @ 0x%x pass %d type ", phyno, pass);
-				switch (phytype & 0xffffffff) {
-				case PHY_ID_AMD79C874VC:
-					printf(STR_ID_AMD79C874VC);
-					break;
-				default:
-					printf("0x%08x\n", phytype);
-					break;
-				}
-#endif
-			}
-		}
-	}
-	if (phyaddr < 0)
-		printf("No PHY device found.\n");
-
-	return phyaddr;
-}
-#endif				/* CFG_DISCOVER_PHY */
-
-void mii_init(void) __attribute__((weak,alias("__mii_init")));
-
-void __mii_init(void)
-{
-	volatile fec_t *fecp;
-	struct fec_info_s *info;
-	struct eth_device *dev;
-	int miispd = 0, i = 0;
-	u16 autoneg = 0;
-
-	/* retrieve from register structure */
-	dev = eth_get_dev();
-	info = dev->priv;
-
-	fecp = (fec_t *) info->miibase;
-
-	fecpin_setclear(dev, 1);
-
-	mii_reset(info);
-
-	/* We use strictly polling mode only */
-	fecp->eimr = 0;
-
-	/* Clear any pending interrupt */
-	fecp->eir = 0xffffffff;
-
-	/* Set MII speed */
-	miispd = (gd->bus_clk / 1000000) / 5;
-	fecp->mscr = miispd << 1;
-
-	info->phy_addr = mii_discover_phy(dev);
-
-#define AUTONEGLINK		(PHY_BMSR_AUTN_COMP | PHY_BMSR_LS)
-	while (i < MCFFEC_TOUT_LOOP) {
-		autoneg = 0;
-		miiphy_read(dev->name, info->phy_addr, PHY_BMSR, &autoneg);
-		i++;
-
-		if ((autoneg & AUTONEGLINK) == AUTONEGLINK)
-			break;
-
-		udelay(500);
-	}
-	if (i >= MCFFEC_TOUT_LOOP) {
-		printf("Auto Negotiation not complete\n");
-	}
-
-	/* adapt to the half/full speed settings */
-	info->dup_spd = miiphy_duplex(dev->name, info->phy_addr) << 16;
-	info->dup_spd |= miiphy_speed(dev->name, info->phy_addr);
-}
-
-/*****************************************************************************
- * Read and write a MII PHY register, routines used by MII Utilities
- *
- * FIXME: These routines are expected to return 0 on success, but mii_send
- *	  does _not_ return an error code. Maybe 0xFFFF means error, i.e.
- *	  no PHY connected...
- *	  For now always return 0.
- * FIXME: These routines only work after calling eth_init() at least once!
- *	  Otherwise they hang in mii_send() !!! Sorry!
- *****************************************************************************/
-
-int mcffec_miiphy_read(char *devname, unsigned char addr, unsigned char reg,
-		       unsigned short *value)
-{
-	short rdreg;		/* register working value */
-
-#ifdef MII_DEBUG
-	printf("miiphy_read(0x%x) @ 0x%x = ", reg, addr);
-#endif
-	rdreg = mii_send(mk_mii_read(addr, reg));
-
-	*value = rdreg;
-
-#ifdef MII_DEBUG
-	printf("0x%04x\n", *value);
-#endif
-
-	return 0;
-}
-
-int mcffec_miiphy_write(char *devname, unsigned char addr, unsigned char reg,
-			unsigned short value)
-{
-	short rdreg;		/* register working value */
-
-#ifdef MII_DEBUG
-	printf("miiphy_write(0x%x) @ 0x%x = ", reg, addr);
-#endif
-
-	rdreg = mii_send(mk_mii_write(addr, reg, value));
-
-#ifdef MII_DEBUG
-	printf("0x%04x\n", value);
-#endif
-
-	return 0;
-}
-
-#endif				/* CONFIG_CMD_NET, FEC_ENET & NET_MULTI */
diff --git a/board/freescale/m5282evb/u-boot.lds b/board/freescale/m5282evb/u-boot.lds
index 96fde6538..707b228af 100644
--- a/board/freescale/m5282evb/u-boot.lds
+++ b/board/freescale/m5282evb/u-boot.lds
@@ -62,7 +62,7 @@ SECTIONS
     lib_generic/crc32.o	(.text)
 
     . = env_offset;
-    common/environment.o(.text)
+    common/env_embedded.o(.text)
 
     *(.text)
     *(.fixup)
diff --git a/board/mgsuvd/Makefile b/board/freescale/m53017evb/Makefile
index af0d400c8..981763d20 100644
--- a/board/mgsuvd/Makefile
+++ b/board/freescale/m53017evb/Makefile
@@ -1,6 +1,6 @@
 #
-# (C) Copyright 2007
-# Heiko Schocher, DENX Software Engineering, hs@denx.de.
+# (C) Copyright 2000-2003
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
 #
 # See file CREDITS for list of people who contributed to this
 # project.
diff --git a/board/freescale/m53017evb/config.mk b/board/freescale/m53017evb/config.mk
new file mode 100644
index 000000000..ce014edca
--- /dev/null
+++ b/board/freescale/m53017evb/config.mk
@@ -0,0 +1,25 @@
+#
+# (C) Copyright 2000-2003
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+# Coldfire contribution by Bernhard Kuhn <bkuhn@metrowerks.com>
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+TEXT_BASE = 0
diff --git a/board/freescale/m53017evb/m53017evb.c b/board/freescale/m53017evb/m53017evb.c
new file mode 100644
index 000000000..f331786bf
--- /dev/null
+++ b/board/freescale/m53017evb/m53017evb.c
@@ -0,0 +1,94 @@
+/*
+ * (C) Copyright 2000-2003
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * Copyright (C) 2004-2008 Freescale Semiconductor, Inc.
+ * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+#include <common.h>
+#include <asm/immap.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+int checkboard(void)
+{
+	puts("Board: ");
+	puts("Freescale M53017EVB\n");
+	return 0;
+};
+
+phys_size_t initdram(int board_type)
+{
+	volatile sdram_t *sdram = (volatile sdram_t *)(MMAP_SDRAM);
+	u32 dramsize, i;
+
+	dramsize = CONFIG_SYS_SDRAM_SIZE * 0x100000;
+
+	for (i = 0x13; i < 0x20; i++) {
+		if (dramsize == (1 << i))
+			break;
+	}
+	i--;
+
+	sdram->cs0 = (CONFIG_SYS_SDRAM_BASE | i);
+#ifdef CONFIG_SYS_SDRAM_BASE1
+	sdram->cs1 = (CONFIG_SYS_SDRAM_BASE | i);
+#endif
+	sdram->cfg1 = CONFIG_SYS_SDRAM_CFG1;
+	sdram->cfg2 = CONFIG_SYS_SDRAM_CFG2;
+
+	udelay(500);
+
+	/* Issue PALL */
+	sdram->ctrl = (CONFIG_SYS_SDRAM_CTRL | 2);
+	asm("nop");
+
+	/* Perform two refresh cycles */
+	sdram->ctrl = CONFIG_SYS_SDRAM_CTRL | 4;
+	sdram->ctrl = CONFIG_SYS_SDRAM_CTRL | 4;
+	asm("nop");
+
+	/* Issue LEMR */
+	sdram->mode = CONFIG_SYS_SDRAM_MODE;
+	asm("nop");
+	sdram->mode = CONFIG_SYS_SDRAM_EMOD;
+	asm("nop");
+
+	sdram->ctrl = (CONFIG_SYS_SDRAM_CTRL | 2);
+	asm("nop");
+
+	sdram->ctrl = (CONFIG_SYS_SDRAM_CTRL & ~0x80000000) | 0x10000F00;
+	asm("nop");
+
+	udelay(100);
+
+	return dramsize;
+};
+
+int testdram(void)
+{
+	/* TODO: XXX XXX XXX */
+	printf("DRAM test not implemented!\n");
+
+	return (0);
+}
diff --git a/board/freescale/m54455evb/u-boot.lds b/board/freescale/m53017evb/u-boot.lds
index 1aa53c23f..dc531418c 100644
--- a/board/freescale/m54455evb/u-boot.lds
+++ b/board/freescale/m53017evb/u-boot.lds
@@ -55,14 +55,14 @@ SECTIONS
     /* WARNING - the following is hand-optimized to fit within	*/
     /* the sector layout of our flash chips!	XXX FIXME XXX	*/
 
-    cpu/mcf5445x/start.o		(.text)
-    lib_m68k/traps.o		(.text)
-    lib_m68k/interrupts.o	(.text)
+    cpu/mcf532x/start.o		(.text)
+    cpu/mcf532x/libmcf532x.a	(.text)
+    lib_m68k/libm68k.a		(.text)
     common/dlmalloc.o		(.text)
     lib_generic/zlib.o		(.text)
 
     . = DEFINED(env_offset) ? env_offset : .;
-    common/environment.o	(.text)
+    common/env_embedded.o	(.text)
 
     *(.text)
     *(.fixup)
diff --git a/board/freescale/m5329evb/Makefile b/board/freescale/m5329evb/Makefile
index ab0f11e9d..07b693c13 100644
--- a/board/freescale/m5329evb/Makefile
+++ b/board/freescale/m5329evb/Makefile
@@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk
 
 LIB	= $(obj)lib$(BOARD).a
 
-COBJS	= $(BOARD).o mii.o nand.o
+COBJS	= $(BOARD).o nand.o
 
 SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
 OBJS	:= $(addprefix $(obj),$(COBJS))
diff --git a/board/freescale/m5329evb/m5329evb.c b/board/freescale/m5329evb/m5329evb.c
index f9fa9fb9c..b4df22f1f 100644
--- a/board/freescale/m5329evb/m5329evb.c
+++ b/board/freescale/m5329evb/m5329evb.c
@@ -42,7 +42,7 @@ phys_size_t initdram(int board_type)
 	volatile sdram_t *sdram = (volatile sdram_t *)(MMAP_SDRAM);
 	u32 dramsize, i;
 
-	dramsize = CFG_SDRAM_SIZE * 0x100000;
+	dramsize = CONFIG_SYS_SDRAM_SIZE * 0x100000;
 
 	for (i = 0x13; i < 0x20; i++) {
 		if (dramsize == (1 << i))
@@ -50,29 +50,29 @@ phys_size_t initdram(int board_type)
 	}
 	i--;
 
-	sdram->cs0 = (CFG_SDRAM_BASE | i);
-	sdram->cfg1 = CFG_SDRAM_CFG1;
-	sdram->cfg2 = CFG_SDRAM_CFG2;
+	sdram->cs0 = (CONFIG_SYS_SDRAM_BASE | i);
+	sdram->cfg1 = CONFIG_SYS_SDRAM_CFG1;
+	sdram->cfg2 = CONFIG_SYS_SDRAM_CFG2;
 
 	/* Issue PALL */
-	sdram->ctrl = CFG_SDRAM_CTRL | 2;
+	sdram->ctrl = CONFIG_SYS_SDRAM_CTRL | 2;
 
 	/* Issue LEMR */
-	sdram->mode = CFG_SDRAM_EMOD;
-	sdram->mode = (CFG_SDRAM_MODE | 0x04000000);
+	sdram->mode = CONFIG_SYS_SDRAM_EMOD;
+	sdram->mode = (CONFIG_SYS_SDRAM_MODE | 0x04000000);
 
 	udelay(500);
 
 	/* Issue PALL */
-	sdram->ctrl = (CFG_SDRAM_CTRL | 2);
+	sdram->ctrl = (CONFIG_SYS_SDRAM_CTRL | 2);
 
 	/* Perform two refresh cycles */
-	sdram->ctrl = CFG_SDRAM_CTRL | 4;
-	sdram->ctrl = CFG_SDRAM_CTRL | 4;
+	sdram->ctrl = CONFIG_SYS_SDRAM_CTRL | 4;
+	sdram->ctrl = CONFIG_SYS_SDRAM_CTRL | 4;
 
-	sdram->mode = CFG_SDRAM_MODE;
+	sdram->mode = CONFIG_SYS_SDRAM_MODE;
 
-	sdram->ctrl = (CFG_SDRAM_CTRL & ~0x80000000) | 0x10000c00;
+	sdram->ctrl = (CONFIG_SYS_SDRAM_CTRL & ~0x80000000) | 0x10000c00;
 
 	udelay(100);
 
diff --git a/board/freescale/m5329evb/mii.c b/board/freescale/m5329evb/mii.c
deleted file mode 100644
index 8f6abf3ee..000000000
--- a/board/freescale/m5329evb/mii.c
+++ /dev/null
@@ -1,306 +0,0 @@
-/*
- * Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
- * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/fec.h>
-#include <asm/immap.h>
-
-#include <config.h>
-#include <net.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#if defined(CONFIG_CMD_NET) && defined(CONFIG_NET_MULTI)
-#undef MII_DEBUG
-#undef ET_DEBUG
-
-int fecpin_setclear(struct eth_device *dev, int setclear)
-{
-	volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO;
-
-	if (setclear) {
-		gpio->par_fec |= GPIO_PAR_FEC_7W_FEC | GPIO_PAR_FEC_MII_FEC;
-		gpio->par_feci2c |=
-		    GPIO_PAR_FECI2C_MDC_EMDC | GPIO_PAR_FECI2C_MDIO_EMDIO;
-	} else {
-		gpio->par_fec &= ~(GPIO_PAR_FEC_7W_FEC | GPIO_PAR_FEC_MII_FEC);
-		gpio->par_feci2c &=
-		    ~(GPIO_PAR_FECI2C_MDC_EMDC | GPIO_PAR_FECI2C_MDIO_EMDIO);
-	}
-	return 0;
-}
-
-#if defined(CFG_DISCOVER_PHY) || defined(CONFIG_CMD_MII)
-#include <miiphy.h>
-
-/* Make MII read/write commands for the FEC. */
-#define mk_mii_read(ADDR, REG)	(0x60020000 | ((ADDR << 23) | (REG & 0x1f) << 18))
-
-#define mk_mii_write(ADDR, REG, VAL)	(0x50020000 | ((ADDR << 23) | (REG & 0x1f) << 18) | (VAL & 0xffff))
-
-/* PHY identification */
-#define PHY_ID_LXT970		0x78100000	/* LXT970 */
-#define PHY_ID_LXT971		0x001378e0	/* LXT971 and 972 */
-#define PHY_ID_82555		0x02a80150	/* Intel 82555 */
-#define PHY_ID_QS6612		0x01814400	/* QS6612 */
-#define PHY_ID_AMD79C784	0x00225610	/* AMD 79C784 */
-#define PHY_ID_LSI80225		0x0016f870	/* LSI 80225 */
-#define PHY_ID_LSI80225B	0x0016f880	/* LSI 80225/B */
-#define PHY_ID_DP83848VV	0x20005C90	/* National 83848 */
-#define PHY_ID_DP83849		0x20005CA2	/* National 82849 */
-
-#define STR_ID_LXT970		"LXT970"
-#define STR_ID_LXT971		"LXT971"
-#define STR_ID_82555		"Intel82555"
-#define STR_ID_QS6612		"QS6612"
-#define STR_ID_AMD79C784	"AMD79C784"
-#define STR_ID_LSI80225		"LSI80225"
-#define STR_ID_LSI80225B	"LSI80225/B"
-#define STR_ID_DP83848VV	"N83848"
-#define STR_ID_DP83849		"N83849"
-
-/****************************************************************************
- * mii_init -- Initialize the MII for MII command without ethernet
- * This function is a subset of eth_init
- ****************************************************************************
- */
-void mii_reset(struct fec_info_s *info)
-{
-	volatile fec_t *fecp = (fec_t *) (info->miibase);
-	int i;
-
-	fecp->ecr = FEC_ECR_RESET;
-	for (i = 0; (fecp->ecr & FEC_ECR_RESET) && (i < FEC_RESET_DELAY); ++i) {
-		udelay(1);
-	}
-	if (i == FEC_RESET_DELAY) {
-		printf("FEC_RESET_DELAY timeout\n");
-	}
-}
-
-/* send command to phy using mii, wait for result */
-uint mii_send(uint mii_cmd)
-{
-	struct fec_info_s *info;
-	struct eth_device *dev;
-	volatile fec_t *ep;
-	uint mii_reply;
-	int j = 0;
-
-	/* retrieve from register structure */
-	dev = eth_get_dev();
-	info = dev->priv;
-
-	ep = (fec_t *) info->miibase;
-
-	ep->mmfr = mii_cmd;	/* command to phy */
-
-	/* wait for mii complete */
-	while (!(ep->eir & FEC_EIR_MII) && (j < MCFFEC_TOUT_LOOP)) {
-		udelay(1);
-		j++;
-	}
-	if (j >= MCFFEC_TOUT_LOOP) {
-		printf("MII not complete\n");
-		return -1;
-	}
-
-	mii_reply = ep->mmfr;	/* result from phy */
-	ep->eir = FEC_EIR_MII;	/* clear MII complete */
-#ifdef ET_DEBUG
-	printf("%s[%d] %s: sent=0x%8.8x, reply=0x%8.8x\n",
-	       __FILE__, __LINE__, __FUNCTION__, mii_cmd, mii_reply);
-#endif
-
-	return (mii_reply & 0xffff);	/* data read from phy */
-}
-#endif				/* CFG_DISCOVER_PHY || CONFIG_CMD_MII */
-
-#if defined(CFG_DISCOVER_PHY)
-int mii_discover_phy(struct eth_device *dev)
-{
-#define MAX_PHY_PASSES 11
-	struct fec_info_s *info = dev->priv;
-	int phyaddr, pass;
-	uint phyno, phytype;
-
-	if (info->phyname_init)
-		return info->phy_addr;
-
-	phyaddr = -1;		/* didn't find a PHY yet */
-	for (pass = 1; pass <= MAX_PHY_PASSES && phyaddr < 0; ++pass) {
-		if (pass > 1) {
-			/* PHY may need more time to recover from reset.
-			 * The LXT970 needs 50ms typical, no maximum is
-			 * specified, so wait 10ms before try again.
-			 * With 11 passes this gives it 100ms to wake up.
-			 */
-			udelay(10000);	/* wait 10ms */
-		}
-
-		for (phyno = 0; phyno < 32 && phyaddr < 0; ++phyno) {
-
-			phytype = mii_send(mk_mii_read(phyno, PHY_PHYIDR1));
-#ifdef ET_DEBUG
-			printf("PHY type 0x%x pass %d type\n", phytype, pass);
-#endif
-			if (phytype != 0xffff) {
-				phyaddr = phyno;
-				phytype <<= 16;
-				phytype |=
-				    mii_send(mk_mii_read(phyno, PHY_PHYIDR2));
-
-				switch (phytype & 0xffffffff) {
-				case PHY_ID_DP83848VV:
-					strcpy(info->phy_name,
-					       STR_ID_DP83848VV);
-					info->phyname_init = 1;
-					break;
-				default:
-					strcpy(info->phy_name, "unknown");
-					info->phyname_init = 1;
-					break;
-				}
-
-#ifdef ET_DEBUG
-				printf("PHY @ 0x%x pass %d type ", phyno, pass);
-				switch (phytype & 0xffffffff) {
-				case PHY_ID_DP83848VV:
-					printf(STR_ID_DP83848VV);
-					break;
-				default:
-					printf("0x%08x\n", phytype);
-					break;
-				}
-#endif
-			}
-		}
-	}
-	if (phyaddr < 0)
-		printf("No PHY device found.\n");
-
-	return phyaddr;
-}
-#endif				/* CFG_DISCOVER_PHY */
-
-void mii_init(void) __attribute__((weak,alias("__mii_init")));
-
-void __mii_init(void)
-{
-	volatile fec_t *fecp;
-	struct fec_info_s *info;
-	struct eth_device *dev;
-	int miispd = 0, i = 0;
-	u16 autoneg = 0;
-
-	/* retrieve from register structure */
-	dev = eth_get_dev();
-	info = dev->priv;
-
-	fecp = (fec_t *) info->miibase;
-
-	fecpin_setclear(dev, 1);
-
-	mii_reset(info);
-
-	/* We use strictly polling mode only */
-	fecp->eimr = 0;
-
-	/* Clear any pending interrupt */
-	fecp->eir = 0xffffffff;
-
-	/* Set MII speed */
-	miispd = (gd->bus_clk / 1000000) / 5;
-	fecp->mscr = miispd << 1;
-
-	info->phy_addr = mii_discover_phy(dev);
-
-#define AUTONEGLINK		(PHY_BMSR_AUTN_COMP | PHY_BMSR_LS)
-	while (i < MCFFEC_TOUT_LOOP) {
-		autoneg = 0;
-		miiphy_read(dev->name, info->phy_addr, PHY_BMSR, &autoneg);
-		i++;
-
-		if ((autoneg & AUTONEGLINK) == AUTONEGLINK)
-			break;
-
-		udelay(500);
-	}
-	if (i >= MCFFEC_TOUT_LOOP) {
-		printf("Auto Negotiation not complete\n");
-	}
-
-	/* adapt to the half/full speed settings */
-	info->dup_spd = miiphy_duplex(dev->name, info->phy_addr) << 16;
-	info->dup_spd |= miiphy_speed(dev->name, info->phy_addr);
-}
-
-/*****************************************************************************
- * Read and write a MII PHY register, routines used by MII Utilities
- *
- * FIXME: These routines are expected to return 0 on success, but mii_send
- *	  does _not_ return an error code. Maybe 0xFFFF means error, i.e.
- *	  no PHY connected...
- *	  For now always return 0.
- * FIXME: These routines only work after calling eth_init() at least once!
- *	  Otherwise they hang in mii_send() !!! Sorry!
- *****************************************************************************/
-
-int mcffec_miiphy_read(char *devname, unsigned char addr, unsigned char reg,
-		       unsigned short *value)
-{
-	short rdreg;		/* register working value */
-
-#ifdef MII_DEBUG
-	printf("miiphy_read(0x%x) @ 0x%x = ", reg, addr);
-#endif
-	rdreg = mii_send(mk_mii_read(addr, reg));
-
-	*value = rdreg;
-
-#ifdef MII_DEBUG
-	printf("0x%04x\n", *value);
-#endif
-
-	return 0;
-}
-
-int mcffec_miiphy_write(char *devname, unsigned char addr, unsigned char reg,
-			unsigned short value)
-{
-	short rdreg;		/* register working value */
-
-#ifdef MII_DEBUG
-	printf("miiphy_write(0x%x) @ 0x%x = ", reg, addr);
-#endif
-
-	rdreg = mii_send(mk_mii_write(addr, reg, value));
-
-#ifdef MII_DEBUG
-	printf("0x%04x\n", value);
-#endif
-
-	return 0;
-}
-
-#endif				/* CONFIG_CMD_NET, FEC_ENET & NET_MULTI */
diff --git a/board/freescale/m5329evb/nand.c b/board/freescale/m5329evb/nand.c
index f84912e37..cf27dda2f 100644
--- a/board/freescale/m5329evb/nand.c
+++ b/board/freescale/m5329evb/nand.c
@@ -36,56 +36,42 @@ DECLARE_GLOBAL_DATA_PTR;
 #include <linux/mtd/mtd.h>
 
 #define SET_CLE		0x10
-#define CLR_CLE		~SET_CLE
 #define SET_ALE		0x08
-#define CLR_ALE		~SET_ALE
 
-static void nand_hwcontrol(struct mtd_info *mtd, int cmd, unsigned int ctrl)
+static void nand_hwcontrol(struct mtd_info *mtdinfo, int cmd, unsigned int ctrl)
 {
 	struct nand_chip *this = mtdinfo->priv;
-/*	volatile fbcs_t *fbcs = (fbcs_t *) MMAP_FBCS; TODO: handle wp */
-	u32 nand_baseaddr = (u32) this->IO_ADDR_W;
+	volatile u16 *nCE = (u16 *) CONFIG_SYS_LATCH_ADDR;
 
 	if (ctrl & NAND_CTRL_CHANGE) {
-		if ( ctrl & NAND_CLE )
-			nand_baseaddr |= SET_CLE;
-		else
-			nand_baseaddr &= CLR_CLE;
-		if ( ctrl & NAND_ALE )
-			nand_baseaddr |= SET_ALE;
-		else
-			nand_baseaddr &= CLR_ALE;
-	}
-	this->IO_ADDR_W = (void __iomem *)(nand_baseaddr);
+		ulong IO_ADDR_W = (ulong) this->IO_ADDR_W;
 
-	if (cmd != NAND_CMD_NONE)
-		writeb(cmd, this->IO_ADDR_W);
-}
+		IO_ADDR_W &= ~(SET_ALE | SET_CLE);
+		*nCE &= 0xFFFB;
 
-static void nand_write_byte(struct mtd_info *mtdinfo, u_char byte)
-{
-	struct nand_chip *this = mtdinfo->priv;
-	*((volatile u8 *)(this->IO_ADDR_W)) = byte;
-}
+		if (ctrl & NAND_NCE)
+			*nCE |= 0x0004;
+		if (ctrl & NAND_CLE)
+			IO_ADDR_W |= SET_CLE;
+		if (ctrl & NAND_ALE)
+			IO_ADDR_W |= SET_ALE;
 
-static u8 nand_read_byte(struct mtd_info *mtdinfo)
-{
-	struct nand_chip *this = mtdinfo->priv;
-	return (u8) (*((volatile u8 *)this->IO_ADDR_R));
-}
+		this->IO_ADDR_W = (void *)IO_ADDR_W;
+	}
 
-static int nand_dev_ready(struct mtd_info *mtdinfo)
-{
-	return 1;
+	if (cmd != NAND_CMD_NONE)
+		writeb(cmd, this->IO_ADDR_W);
 }
 
 int board_nand_init(struct nand_chip *nand)
 {
 	volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO;
 
-	*((volatile u16 *)CFG_LATCH_ADDR) |= 0x0004;
-
-	/* set up pin configuration */
+	/*
+	 * set up pin configuration - enabled 2nd output buffer's signals
+	 * (nand_ngpio - nCE USB1/2_PWR_EN, LATCH_GPIOs, LCD_VEEEN, etc)
+	 * to use nCE signal
+	 */
 	gpio->par_timer &= ~GPIO_PAR_TIN3_TIN3;
 	gpio->pddr_timer |= 0x08;
 	gpio->ppd_timer |= 0x08;
@@ -95,9 +81,6 @@ int board_nand_init(struct nand_chip *nand)
 	nand->chip_delay = 50;
 	nand->ecc.mode = NAND_ECC_SOFT;
 	nand->cmd_ctrl = nand_hwcontrol;
-	nand->read_byte = nand_read_byte;
-	nand->write_byte = nand_write_byte;
-	nand->dev_ready = nand_dev_ready;
 
 	return 0;
 }
diff --git a/board/freescale/m5329evb/u-boot.lds b/board/freescale/m5329evb/u-boot.lds
index 1ddfbc470..c9da922ae 100644
--- a/board/freescale/m5329evb/u-boot.lds
+++ b/board/freescale/m5329evb/u-boot.lds
@@ -62,7 +62,7 @@ SECTIONS
     lib_generic/zlib.o		(.text)
 
     . = DEFINED(env_offset) ? env_offset : .;
-    common/environment.o	(.text)
+    common/env_embedded.o	(.text)
 
     *(.text)
     *(.fixup)
diff --git a/board/freescale/m5373evb/Makefile b/board/freescale/m5373evb/Makefile
index ab0f11e9d..07b693c13 100644
--- a/board/freescale/m5373evb/Makefile
+++ b/board/freescale/m5373evb/Makefile
@@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk
 
 LIB	= $(obj)lib$(BOARD).a
 
-COBJS	= $(BOARD).o mii.o nand.o
+COBJS	= $(BOARD).o nand.o
 
 SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
 OBJS	:= $(addprefix $(obj),$(COBJS))
diff --git a/board/freescale/m5373evb/m5373evb.c b/board/freescale/m5373evb/m5373evb.c
index a269ee6d4..376de4b95 100644
--- a/board/freescale/m5373evb/m5373evb.c
+++ b/board/freescale/m5373evb/m5373evb.c
@@ -42,7 +42,7 @@ phys_size_t initdram(int board_type)
 	volatile sdram_t *sdram = (volatile sdram_t *)(MMAP_SDRAM);
 	u32 dramsize, i;
 
-	dramsize = CFG_SDRAM_SIZE * 0x100000;
+	dramsize = CONFIG_SYS_SDRAM_SIZE * 0x100000;
 
 	for (i = 0x13; i < 0x20; i++) {
 		if (dramsize == (1 << i))
@@ -50,29 +50,29 @@ phys_size_t initdram(int board_type)
 	}
 	i--;
 
-	sdram->cs0 = (CFG_SDRAM_BASE | i);
-	sdram->cfg1 = CFG_SDRAM_CFG1;
-	sdram->cfg2 = CFG_SDRAM_CFG2;
+	sdram->cs0 = (CONFIG_SYS_SDRAM_BASE | i);
+	sdram->cfg1 = CONFIG_SYS_SDRAM_CFG1;
+	sdram->cfg2 = CONFIG_SYS_SDRAM_CFG2;
 
 	/* Issue PALL */
-	sdram->ctrl = CFG_SDRAM_CTRL | 2;
+	sdram->ctrl = CONFIG_SYS_SDRAM_CTRL | 2;
 
 	/* Issue LEMR */
-	sdram->mode = CFG_SDRAM_EMOD;
-	sdram->mode = (CFG_SDRAM_MODE | 0x04000000);
+	sdram->mode = CONFIG_SYS_SDRAM_EMOD;
+	sdram->mode = (CONFIG_SYS_SDRAM_MODE | 0x04000000);
 
 	udelay(500);
 
 	/* Issue PALL */
-	sdram->ctrl = (CFG_SDRAM_CTRL | 2);
+	sdram->ctrl = (CONFIG_SYS_SDRAM_CTRL | 2);
 
 	/* Perform two refresh cycles */
-	sdram->ctrl = CFG_SDRAM_CTRL | 4;
-	sdram->ctrl = CFG_SDRAM_CTRL | 4;
+	sdram->ctrl = CONFIG_SYS_SDRAM_CTRL | 4;
+	sdram->ctrl = CONFIG_SYS_SDRAM_CTRL | 4;
 
-	sdram->mode = CFG_SDRAM_MODE;
+	sdram->mode = CONFIG_SYS_SDRAM_MODE;
 
-	sdram->ctrl = (CFG_SDRAM_CTRL & ~0x80000000) | 0x10000c00;
+	sdram->ctrl = (CONFIG_SYS_SDRAM_CTRL & ~0x80000000) | 0x10000c00;
 
 	udelay(100);
 
diff --git a/board/freescale/m5373evb/mii.c b/board/freescale/m5373evb/mii.c
deleted file mode 100644
index 8f6abf3ee..000000000
--- a/board/freescale/m5373evb/mii.c
+++ /dev/null
@@ -1,306 +0,0 @@
-/*
- * Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
- * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/fec.h>
-#include <asm/immap.h>
-
-#include <config.h>
-#include <net.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#if defined(CONFIG_CMD_NET) && defined(CONFIG_NET_MULTI)
-#undef MII_DEBUG
-#undef ET_DEBUG
-
-int fecpin_setclear(struct eth_device *dev, int setclear)
-{
-	volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO;
-
-	if (setclear) {
-		gpio->par_fec |= GPIO_PAR_FEC_7W_FEC | GPIO_PAR_FEC_MII_FEC;
-		gpio->par_feci2c |=
-		    GPIO_PAR_FECI2C_MDC_EMDC | GPIO_PAR_FECI2C_MDIO_EMDIO;
-	} else {
-		gpio->par_fec &= ~(GPIO_PAR_FEC_7W_FEC | GPIO_PAR_FEC_MII_FEC);
-		gpio->par_feci2c &=
-		    ~(GPIO_PAR_FECI2C_MDC_EMDC | GPIO_PAR_FECI2C_MDIO_EMDIO);
-	}
-	return 0;
-}
-
-#if defined(CFG_DISCOVER_PHY) || defined(CONFIG_CMD_MII)
-#include <miiphy.h>
-
-/* Make MII read/write commands for the FEC. */
-#define mk_mii_read(ADDR, REG)	(0x60020000 | ((ADDR << 23) | (REG & 0x1f) << 18))
-
-#define mk_mii_write(ADDR, REG, VAL)	(0x50020000 | ((ADDR << 23) | (REG & 0x1f) << 18) | (VAL & 0xffff))
-
-/* PHY identification */
-#define PHY_ID_LXT970		0x78100000	/* LXT970 */
-#define PHY_ID_LXT971		0x001378e0	/* LXT971 and 972 */
-#define PHY_ID_82555		0x02a80150	/* Intel 82555 */
-#define PHY_ID_QS6612		0x01814400	/* QS6612 */
-#define PHY_ID_AMD79C784	0x00225610	/* AMD 79C784 */
-#define PHY_ID_LSI80225		0x0016f870	/* LSI 80225 */
-#define PHY_ID_LSI80225B	0x0016f880	/* LSI 80225/B */
-#define PHY_ID_DP83848VV	0x20005C90	/* National 83848 */
-#define PHY_ID_DP83849		0x20005CA2	/* National 82849 */
-
-#define STR_ID_LXT970		"LXT970"
-#define STR_ID_LXT971		"LXT971"
-#define STR_ID_82555		"Intel82555"
-#define STR_ID_QS6612		"QS6612"
-#define STR_ID_AMD79C784	"AMD79C784"
-#define STR_ID_LSI80225		"LSI80225"
-#define STR_ID_LSI80225B	"LSI80225/B"
-#define STR_ID_DP83848VV	"N83848"
-#define STR_ID_DP83849		"N83849"
-
-/****************************************************************************
- * mii_init -- Initialize the MII for MII command without ethernet
- * This function is a subset of eth_init
- ****************************************************************************
- */
-void mii_reset(struct fec_info_s *info)
-{
-	volatile fec_t *fecp = (fec_t *) (info->miibase);
-	int i;
-
-	fecp->ecr = FEC_ECR_RESET;
-	for (i = 0; (fecp->ecr & FEC_ECR_RESET) && (i < FEC_RESET_DELAY); ++i) {
-		udelay(1);
-	}
-	if (i == FEC_RESET_DELAY) {
-		printf("FEC_RESET_DELAY timeout\n");
-	}
-}
-
-/* send command to phy using mii, wait for result */
-uint mii_send(uint mii_cmd)
-{
-	struct fec_info_s *info;
-	struct eth_device *dev;
-	volatile fec_t *ep;
-	uint mii_reply;
-	int j = 0;
-
-	/* retrieve from register structure */
-	dev = eth_get_dev();
-	info = dev->priv;
-
-	ep = (fec_t *) info->miibase;
-
-	ep->mmfr = mii_cmd;	/* command to phy */
-
-	/* wait for mii complete */
-	while (!(ep->eir & FEC_EIR_MII) && (j < MCFFEC_TOUT_LOOP)) {
-		udelay(1);
-		j++;
-	}
-	if (j >= MCFFEC_TOUT_LOOP) {
-		printf("MII not complete\n");
-		return -1;
-	}
-
-	mii_reply = ep->mmfr;	/* result from phy */
-	ep->eir = FEC_EIR_MII;	/* clear MII complete */
-#ifdef ET_DEBUG
-	printf("%s[%d] %s: sent=0x%8.8x, reply=0x%8.8x\n",
-	       __FILE__, __LINE__, __FUNCTION__, mii_cmd, mii_reply);
-#endif
-
-	return (mii_reply & 0xffff);	/* data read from phy */
-}
-#endif				/* CFG_DISCOVER_PHY || CONFIG_CMD_MII */
-
-#if defined(CFG_DISCOVER_PHY)
-int mii_discover_phy(struct eth_device *dev)
-{
-#define MAX_PHY_PASSES 11
-	struct fec_info_s *info = dev->priv;
-	int phyaddr, pass;
-	uint phyno, phytype;
-
-	if (info->phyname_init)
-		return info->phy_addr;
-
-	phyaddr = -1;		/* didn't find a PHY yet */
-	for (pass = 1; pass <= MAX_PHY_PASSES && phyaddr < 0; ++pass) {
-		if (pass > 1) {
-			/* PHY may need more time to recover from reset.
-			 * The LXT970 needs 50ms typical, no maximum is
-			 * specified, so wait 10ms before try again.
-			 * With 11 passes this gives it 100ms to wake up.
-			 */
-			udelay(10000);	/* wait 10ms */
-		}
-
-		for (phyno = 0; phyno < 32 && phyaddr < 0; ++phyno) {
-
-			phytype = mii_send(mk_mii_read(phyno, PHY_PHYIDR1));
-#ifdef ET_DEBUG
-			printf("PHY type 0x%x pass %d type\n", phytype, pass);
-#endif
-			if (phytype != 0xffff) {
-				phyaddr = phyno;
-				phytype <<= 16;
-				phytype |=
-				    mii_send(mk_mii_read(phyno, PHY_PHYIDR2));
-
-				switch (phytype & 0xffffffff) {
-				case PHY_ID_DP83848VV:
-					strcpy(info->phy_name,
-					       STR_ID_DP83848VV);
-					info->phyname_init = 1;
-					break;
-				default:
-					strcpy(info->phy_name, "unknown");
-					info->phyname_init = 1;
-					break;
-				}
-
-#ifdef ET_DEBUG
-				printf("PHY @ 0x%x pass %d type ", phyno, pass);
-				switch (phytype & 0xffffffff) {
-				case PHY_ID_DP83848VV:
-					printf(STR_ID_DP83848VV);
-					break;
-				default:
-					printf("0x%08x\n", phytype);
-					break;
-				}
-#endif
-			}
-		}
-	}
-	if (phyaddr < 0)
-		printf("No PHY device found.\n");
-
-	return phyaddr;
-}
-#endif				/* CFG_DISCOVER_PHY */
-
-void mii_init(void) __attribute__((weak,alias("__mii_init")));
-
-void __mii_init(void)
-{
-	volatile fec_t *fecp;
-	struct fec_info_s *info;
-	struct eth_device *dev;
-	int miispd = 0, i = 0;
-	u16 autoneg = 0;
-
-	/* retrieve from register structure */
-	dev = eth_get_dev();
-	info = dev->priv;
-
-	fecp = (fec_t *) info->miibase;
-
-	fecpin_setclear(dev, 1);
-
-	mii_reset(info);
-
-	/* We use strictly polling mode only */
-	fecp->eimr = 0;
-
-	/* Clear any pending interrupt */
-	fecp->eir = 0xffffffff;
-
-	/* Set MII speed */
-	miispd = (gd->bus_clk / 1000000) / 5;
-	fecp->mscr = miispd << 1;
-
-	info->phy_addr = mii_discover_phy(dev);
-
-#define AUTONEGLINK		(PHY_BMSR_AUTN_COMP | PHY_BMSR_LS)
-	while (i < MCFFEC_TOUT_LOOP) {
-		autoneg = 0;
-		miiphy_read(dev->name, info->phy_addr, PHY_BMSR, &autoneg);
-		i++;
-
-		if ((autoneg & AUTONEGLINK) == AUTONEGLINK)
-			break;
-
-		udelay(500);
-	}
-	if (i >= MCFFEC_TOUT_LOOP) {
-		printf("Auto Negotiation not complete\n");
-	}
-
-	/* adapt to the half/full speed settings */
-	info->dup_spd = miiphy_duplex(dev->name, info->phy_addr) << 16;
-	info->dup_spd |= miiphy_speed(dev->name, info->phy_addr);
-}
-
-/*****************************************************************************
- * Read and write a MII PHY register, routines used by MII Utilities
- *
- * FIXME: These routines are expected to return 0 on success, but mii_send
- *	  does _not_ return an error code. Maybe 0xFFFF means error, i.e.
- *	  no PHY connected...
- *	  For now always return 0.
- * FIXME: These routines only work after calling eth_init() at least once!
- *	  Otherwise they hang in mii_send() !!! Sorry!
- *****************************************************************************/
-
-int mcffec_miiphy_read(char *devname, unsigned char addr, unsigned char reg,
-		       unsigned short *value)
-{
-	short rdreg;		/* register working value */
-
-#ifdef MII_DEBUG
-	printf("miiphy_read(0x%x) @ 0x%x = ", reg, addr);
-#endif
-	rdreg = mii_send(mk_mii_read(addr, reg));
-
-	*value = rdreg;
-
-#ifdef MII_DEBUG
-	printf("0x%04x\n", *value);
-#endif
-
-	return 0;
-}
-
-int mcffec_miiphy_write(char *devname, unsigned char addr, unsigned char reg,
-			unsigned short value)
-{
-	short rdreg;		/* register working value */
-
-#ifdef MII_DEBUG
-	printf("miiphy_write(0x%x) @ 0x%x = ", reg, addr);
-#endif
-
-	rdreg = mii_send(mk_mii_write(addr, reg, value));
-
-#ifdef MII_DEBUG
-	printf("0x%04x\n", value);
-#endif
-
-	return 0;
-}
-
-#endif				/* CONFIG_CMD_NET, FEC_ENET & NET_MULTI */
diff --git a/board/freescale/m5373evb/nand.c b/board/freescale/m5373evb/nand.c
index 404a9c386..3ebef059e 100644
--- a/board/freescale/m5373evb/nand.c
+++ b/board/freescale/m5373evb/nand.c
@@ -41,19 +41,21 @@ DECLARE_GLOBAL_DATA_PTR;
 static void nand_hwcontrol(struct mtd_info *mtdinfo, int cmd, unsigned int ctrl)
 {
 	struct nand_chip *this = mtdinfo->priv;
-	volatile fbcs_t *fbcs = (fbcs_t *) MMAP_FBCS;
-	u32 nand_baseaddr = (u32) this->IO_ADDR_W;
+	volatile u16 *nCE = (u16 *) CONFIG_SYS_LATCH_ADDR;
 
 	if (ctrl & NAND_CTRL_CHANGE) {
 		ulong IO_ADDR_W = (ulong) this->IO_ADDR_W;
-		IO_ADDR_W &= ~(SET_ALE | SE_CLE);
 
+		IO_ADDR_W &= ~(SET_ALE | SET_CLE);
+		*nCE &= 0xFFFB;
+
+		if (ctrl & NAND_NCE)
+			*nCE |= 0x0004;
 		if (ctrl & NAND_CLE)
 			IO_ADDR_W |= SET_CLE;
 		if (ctrl & NAND_ALE)
 			IO_ADDR_W |= SET_ALE;
 
-		at91_set_gpio_value(AT91_PIN_PD15, !(ctrl & NAND_NCE));
 		this->IO_ADDR_W = (void *)IO_ADDR_W;
 
 	}
@@ -67,10 +69,13 @@ int board_nand_init(struct nand_chip *nand)
 	volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO;
 	volatile fbcs_t *fbcs = (fbcs_t *) MMAP_FBCS;
 
-	*((volatile u16 *)CFG_LATCH_ADDR) |= 0x0004;
 	fbcs->csmr2 &= ~FBCS_CSMR_WP;
 
-	/* set up pin configuration */
+	/*
+	 * set up pin configuration - enabled 2nd output buffer's signals
+	 * (nand_ngpio - nCE USB1/2_PWR_EN, LATCH_GPIOs, LCD_VEEEN, etc)
+	 * to use nCE signal
+	 */
 	gpio->par_timer &= ~GPIO_PAR_TIN3_TIN3;
 	gpio->pddr_timer |= 0x08;
 	gpio->ppd_timer |= 0x08;
diff --git a/board/freescale/m5373evb/u-boot.lds b/board/freescale/m5373evb/u-boot.lds
index d30a401be..fcf1ff1d8 100644
--- a/board/freescale/m5373evb/u-boot.lds
+++ b/board/freescale/m5373evb/u-boot.lds
@@ -62,7 +62,7 @@ SECTIONS
     lib_generic/zlib.o		(.text)
 
     . = DEFINED(env_offset) ? env_offset : .;
-    common/environment.o	(.text)
+    common/env_embedded.o	(.text)
 
     *(.text)
     *(.fixup)
diff --git a/board/freescale/m54451evb/Makefile b/board/freescale/m54451evb/Makefile
index 74c252869..981763d20 100644
--- a/board/freescale/m54451evb/Makefile
+++ b/board/freescale/m54451evb/Makefile
@@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk
 
 LIB	= $(obj)lib$(BOARD).a
 
-COBJS	= $(BOARD).o mii.o
+COBJS	= $(BOARD).o
 
 SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
 OBJS	:= $(addprefix $(obj),$(COBJS))
diff --git a/board/freescale/m54451evb/m54451evb.c b/board/freescale/m54451evb/m54451evb.c
index 768f40bb0..088c8c4d1 100644
--- a/board/freescale/m54451evb/m54451evb.c
+++ b/board/freescale/m54451evb/m54451evb.c
@@ -49,16 +49,16 @@ phys_size_t initdram(int board_type)
 	 * Serial Boot: The dram is already initialized in start.S
 	 * only require to return DRAM size
 	 */
-	dramsize = CFG_SDRAM_SIZE * 0x100000;
+	dramsize = CONFIG_SYS_SDRAM_SIZE * 0x100000;
 #else
 	volatile sdramc_t *sdram = (volatile sdramc_t *)(MMAP_SDRAM);
 	volatile gpio_t *gpio = (volatile gpio_t *)(MMAP_GPIO);
 	u32 i;
 
-	dramsize = CFG_SDRAM_SIZE * 0x100000;
+	dramsize = CONFIG_SYS_SDRAM_SIZE * 0x100000;
 
-	if ((sdram->sdcfg1 == CFG_SDRAM_CFG1) &&
-	    (sdram->sdcfg2 == CFG_SDRAM_CFG2))
+	if ((sdram->sdcfg1 == CONFIG_SYS_SDRAM_CFG1) &&
+	    (sdram->sdcfg2 == CONFIG_SYS_SDRAM_CFG2))
 		return dramsize;
 
 	for (i = 0x13; i < 0x20; i++) {
@@ -67,32 +67,32 @@ phys_size_t initdram(int board_type)
 	}
 	i--;
 
-	gpio->mscr_sdram = CFG_SDRAM_DRV_STRENGTH;
+	gpio->mscr_sdram = CONFIG_SYS_SDRAM_DRV_STRENGTH;
 
-	sdram->sdcs0 = (CFG_SDRAM_BASE | i);
+	sdram->sdcs0 = (CONFIG_SYS_SDRAM_BASE | i);
 
-	sdram->sdcfg1 = CFG_SDRAM_CFG1;
-	sdram->sdcfg2 = CFG_SDRAM_CFG2;
+	sdram->sdcfg1 = CONFIG_SYS_SDRAM_CFG1;
+	sdram->sdcfg2 = CONFIG_SYS_SDRAM_CFG2;
 
 	udelay(200);
 
 	/* Issue PALL */
-	sdram->sdcr = CFG_SDRAM_CTRL | 2;
+	sdram->sdcr = CONFIG_SYS_SDRAM_CTRL | 2;
 	__asm__("nop");
 
 	/* Perform two refresh cycles */
-	sdram->sdcr = CFG_SDRAM_CTRL | 4;
+	sdram->sdcr = CONFIG_SYS_SDRAM_CTRL | 4;
 	__asm__("nop");
-	sdram->sdcr = CFG_SDRAM_CTRL | 4;
+	sdram->sdcr = CONFIG_SYS_SDRAM_CTRL | 4;
 	__asm__("nop");
 
 	/* Issue LEMR */
-	sdram->sdmr = CFG_SDRAM_MODE;
+	sdram->sdmr = CONFIG_SYS_SDRAM_MODE;
 	__asm__("nop");
-	sdram->sdmr = CFG_SDRAM_EMOD;
+	sdram->sdmr = CONFIG_SYS_SDRAM_EMOD;
 	__asm__("nop");
 
-	sdram->sdcr = (CFG_SDRAM_CTRL & ~0x80000000) | 0x10000000;
+	sdram->sdcr = (CONFIG_SYS_SDRAM_CTRL & ~0x80000000) | 0x10000000;
 
 	udelay(100);
 #endif
diff --git a/board/freescale/m54451evb/mii.c b/board/freescale/m54451evb/mii.c
deleted file mode 100644
index 5a4330c74..000000000
--- a/board/freescale/m54451evb/mii.c
+++ /dev/null
@@ -1,303 +0,0 @@
-/*
- * Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
- * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/fec.h>
-#include <asm/immap.h>
-
-#include <config.h>
-#include <net.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#if defined(CONFIG_CMD_NET) && defined(CONFIG_NET_MULTI)
-#undef MII_DEBUG
-#undef ET_DEBUG
-
-int fecpin_setclear(struct eth_device *dev, int setclear)
-{
-	volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO;
-	struct fec_info_s *info = (struct fec_info_s *)dev->priv;
-
-	if (setclear) {
-		gpio->par_feci2c |=
-		    (GPIO_PAR_FECI2C_MDC0_MDC0 | GPIO_PAR_FECI2C_MDIO0_MDIO0);
-
-		if (info->iobase == CFG_FEC0_IOBASE)
-			gpio->par_fec |= GPIO_PAR_FEC_FEC0_RMII_GPIO;
-		else
-			gpio->par_fec |= GPIO_PAR_FEC_FEC1_RMII_ATA;
-	} else {
-		gpio->par_feci2c &=
-		    ~(GPIO_PAR_FECI2C_MDC0_MDC0 | GPIO_PAR_FECI2C_MDIO0_MDIO0);
-
-		if (info->iobase == CFG_FEC0_IOBASE)
-			gpio->par_fec &= GPIO_PAR_FEC_FEC0_MASK;
-		else
-			gpio->par_fec &= GPIO_PAR_FEC_FEC1_MASK;
-	}
-	return 0;
-}
-
-#if defined(CFG_DISCOVER_PHY) || defined(CONFIG_CMD_MII)
-#include <miiphy.h>
-
-/* Make MII read/write commands for the FEC. */
-#define mk_mii_read(ADDR, REG)	(0x60020000 | ((ADDR << 23) | (REG & 0x1f) << 18))
-
-#define mk_mii_write(ADDR, REG, VAL)	(0x50020000 | ((ADDR << 23) | (REG & 0x1f) << 18) | (VAL & 0xffff))
-
-/* PHY identification */
-#define PHY_ID_KSZ8041NL	0x00221512
-#define STR_ID_KSZ8041NL	"KSZ8041NL"
-
-/****************************************************************************
- * mii_init -- Initialize the MII for MII command without ethernet
- * This function is a subset of eth_init
- ****************************************************************************
- */
-void mii_reset(struct fec_info_s *info)
-{
-	volatile fec_t *fecp = (fec_t *) (info->miibase);
-	struct eth_device *dev;
-	int i, miispd;
-	u16 rst = 0;
-
-	dev = eth_get_dev();
-
-	miispd = (gd->bus_clk / 1000000) / 5;
-	fecp->mscr = miispd << 1;
-
-	miiphy_write(dev->name, info->phy_addr, PHY_BMCR, PHY_BMCR_RESET);
-	for (i = 0; i < FEC_RESET_DELAY; ++i) {
-		udelay(500);
-		miiphy_read(dev->name, info->phy_addr, PHY_BMCR, &rst);
-		if ((rst & PHY_BMCR_RESET) == 0)
-			break;
-	}
-	if (i == FEC_RESET_DELAY)
-		printf("Mii reset timeout %d\n", i);
-}
-
-/* send command to phy using mii, wait for result */
-uint mii_send(uint mii_cmd)
-{
-	struct fec_info_s *info;
-	struct eth_device *dev;
-	volatile fec_t *ep;
-	uint mii_reply;
-	int j = 0;
-
-	/* retrieve from register structure */
-	dev = eth_get_dev();
-	info = dev->priv;
-
-	ep = (fec_t *) info->miibase;
-
-	ep->mmfr = mii_cmd;	/* command to phy */
-
-	/* wait for mii complete */
-	while (!(ep->eir & FEC_EIR_MII) && (j < MCFFEC_TOUT_LOOP)) {
-		udelay(1);
-		j++;
-	}
-	if (j >= MCFFEC_TOUT_LOOP) {
-		printf("MII not complete\n");
-		return -1;
-	}
-
-	mii_reply = ep->mmfr;	/* result from phy */
-	ep->eir = FEC_EIR_MII;	/* clear MII complete */
-#ifdef ET_DEBUG
-	printf("%s[%d] %s: sent=0x%8.8x, reply=0x%8.8x\n",
-	       __FILE__, __LINE__, __FUNCTION__, mii_cmd, mii_reply);
-#endif
-
-	return (mii_reply & 0xffff);	/* data read from phy */
-}
-#endif				/* CFG_DISCOVER_PHY || (CONFIG_MII) */
-
-#if defined(CFG_DISCOVER_PHY)
-int mii_discover_phy(struct eth_device *dev)
-{
-#define MAX_PHY_PASSES 11
-	struct fec_info_s *info = dev->priv;
-	int phyaddr, pass;
-	uint phyno, phytype;
-
-	if (info->phyname_init)
-		return info->phy_addr;
-
-	phyaddr = -1;		/* didn't find a PHY yet */
-	for (pass = 1; pass <= MAX_PHY_PASSES && phyaddr < 0; ++pass) {
-		if (pass > 1) {
-			/* PHY may need more time to recover from reset.
-			 * The LXT970 needs 50ms typical, no maximum is
-			 * specified, so wait 10ms before try again.
-			 * With 11 passes this gives it 100ms to wake up.
-			 */
-			udelay(10000);	/* wait 10ms */
-		}
-
-		for (phyno = 0; phyno < 32 && phyaddr < 0; ++phyno) {
-
-			phytype = mii_send(mk_mii_read(phyno, PHY_PHYIDR1));
-#ifdef ET_DEBUG
-			printf("PHY type 0x%x pass %d type\n", phytype, pass);
-#endif
-			if (phytype != 0xffff) {
-				phyaddr = phyno;
-				phytype <<= 16;
-				phytype |=
-				    mii_send(mk_mii_read(phyno, PHY_PHYIDR2));
-
-				switch (phytype & 0xffffffff) {
-				case PHY_ID_KSZ8041NL:
-					strcpy(info->phy_name,
-					       STR_ID_KSZ8041NL);
-					info->phyname_init = 1;
-					break;
-				default:
-					strcpy(info->phy_name, "unknown");
-					info->phyname_init = 1;
-					break;
-				}
-
-#ifdef ET_DEBUG
-				printf("PHY @ 0x%x pass %d type ", phyno, pass);
-				switch (phytype & 0xffffffff) {
-				case PHY_ID_KSZ8041NL:
-					printf(STR_ID_KSZ8041NL);
-					break;
-				default:
-					printf("0x%08x\n", phytype);
-					break;
-				}
-#endif
-			}
-		}
-	}
-	if (phyaddr < 0)
-		printf("No PHY device found.\n");
-
-	return phyaddr;
-}
-#endif				/* CFG_DISCOVER_PHY */
-
-void mii_init(void) __attribute__ ((weak, alias("__mii_init")));
-
-void __mii_init(void)
-{
-	volatile fec_t *fecp;
-	struct fec_info_s *info;
-	struct eth_device *dev;
-	int miispd = 0, i = 0;
-	u16 autoneg = 0;
-
-	/* retrieve from register structure */
-	dev = eth_get_dev();
-	info = dev->priv;
-
-	fecp = (fec_t *) info->miibase;
-
-	/* We use strictly polling mode only */
-	fecp->eimr = 0;
-
-	/* Clear any pending interrupt */
-	fecp->eir = 0xffffffff;
-
-	/* Set MII speed */
-	miispd = (gd->bus_clk / 1000000) / 5;
-	fecp->mscr = miispd << 1;
-
-	info->phy_addr = mii_discover_phy(dev);
-
-#define AUTONEGLINK		(PHY_BMSR_AUTN_COMP | PHY_BMSR_LS)
-	while (i < MCFFEC_TOUT_LOOP) {
-		autoneg = 0;
-		miiphy_read(dev->name, info->phy_addr, PHY_BMSR, &autoneg);
-		i++;
-
-		if ((autoneg & AUTONEGLINK) == AUTONEGLINK)
-			break;
-
-		udelay(500);
-	}
-	if (i >= MCFFEC_TOUT_LOOP) {
-		printf("Auto Negotiation not complete\n");
-	}
-
-	/* adapt to the half/full speed settings */
-	info->dup_spd = miiphy_duplex(dev->name, info->phy_addr) << 16;
-	info->dup_spd |= miiphy_speed(dev->name, info->phy_addr);
-}
-
-/*****************************************************************************
- * Read and write a MII PHY register, routines used by MII Utilities
- *
- * FIXME: These routines are expected to return 0 on success, but mii_send
- *	  does _not_ return an error code. Maybe 0xFFFF means error, i.e.
- *	  no PHY connected...
- *	  For now always return 0.
- * FIXME: These routines only work after calling eth_init() at least once!
- *	  Otherwise they hang in mii_send() !!! Sorry!
- *****************************************************************************/
-
-int mcffec_miiphy_read(char *devname, unsigned char addr, unsigned char reg,
-		       unsigned short *value)
-{
-	short rdreg;		/* register working value */
-
-#ifdef MII_DEBUG
-	printf("miiphy_read(0x%x) @ 0x%x = ", reg, addr);
-#endif
-	rdreg = mii_send(mk_mii_read(addr, reg));
-
-	*value = rdreg;
-
-#ifdef MII_DEBUG
-	printf("0x%04x\n", *value);
-#endif
-
-	return 0;
-}
-
-int mcffec_miiphy_write(char *devname, unsigned char addr, unsigned char reg,
-			unsigned short value)
-{
-	short rdreg;		/* register working value */
-
-#ifdef MII_DEBUG
-	printf("miiphy_write(0x%x) @ 0x%x = ", reg, addr);
-#endif
-
-	rdreg = mii_send(mk_mii_write(addr, reg, value));
-
-#ifdef MII_DEBUG
-	printf("0x%04x\n", value);
-#endif
-
-	return 0;
-}
-
-#endif				/* CONFIG_CMD_NET, FEC_ENET & NET_MULTI */
diff --git a/board/freescale/m54451evb/u-boot.spa b/board/freescale/m54451evb/u-boot.spa
index 22c604865..08e184c1e 100644
--- a/board/freescale/m54451evb/u-boot.spa
+++ b/board/freescale/m54451evb/u-boot.spa
@@ -62,7 +62,7 @@ SECTIONS
     lib_generic/zlib.o		(.text)
 
     . = DEFINED(env_offset) ? env_offset : .;
-    common/environment.o	(.text)
+    common/env_embedded.o	(.text)
 
     *(.text)
     *(.fixup)
diff --git a/board/freescale/m54451evb/u-boot.stm b/board/freescale/m54451evb/u-boot.stm
index 0752e2715..e9eac67b9 100644
--- a/board/freescale/m54451evb/u-boot.stm
+++ b/board/freescale/m54451evb/u-boot.stm
@@ -68,7 +68,7 @@ SECTIONS
     board/freescale/m54455evb/m54455evb.o	(.text)
 
     . = DEFINED(env_offset) ? env_offset : .;
-    common/environment.o	(.text)
+    common/env_embedded.o	(.text)
 */
     *(.text)
     *(.fixup)
diff --git a/board/freescale/m54455evb/Makefile b/board/freescale/m54455evb/Makefile
index 74c252869..981763d20 100644
--- a/board/freescale/m54455evb/Makefile
+++ b/board/freescale/m54455evb/Makefile
@@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk
 
 LIB	= $(obj)lib$(BOARD).a
 
-COBJS	= $(BOARD).o mii.o
+COBJS	= $(BOARD).o
 
 SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
 OBJS	:= $(addprefix $(obj),$(COBJS))
diff --git a/board/freescale/m54455evb/m54455evb.c b/board/freescale/m54455evb/m54455evb.c
index 100682a26..293b5b0e4 100644
--- a/board/freescale/m54455evb/m54455evb.c
+++ b/board/freescale/m54455evb/m54455evb.c
@@ -45,13 +45,13 @@ phys_size_t initdram(int board_type)
 	 * Serial Boot: The dram is already initialized in start.S
 	 * only require to return DRAM size
 	 */
-	dramsize = CFG_SDRAM_SIZE * 0x100000 >> 1;
+	dramsize = CONFIG_SYS_SDRAM_SIZE * 0x100000 >> 1;
 #else
 	volatile sdramc_t *sdram = (volatile sdramc_t *)(MMAP_SDRAM);
 	volatile gpio_t *gpio = (volatile gpio_t *)(MMAP_GPIO);
 	u32 i;
 
-	dramsize = CFG_SDRAM_SIZE * 0x100000 >> 1;
+	dramsize = CONFIG_SYS_SDRAM_SIZE * 0x100000 >> 1;
 
 	for (i = 0x13; i < 0x20; i++) {
 		if (dramsize == (1 << i))
@@ -59,33 +59,33 @@ phys_size_t initdram(int board_type)
 	}
 	i--;
 
-	gpio->mscr_sdram = CFG_SDRAM_DRV_STRENGTH;
+	gpio->mscr_sdram = CONFIG_SYS_SDRAM_DRV_STRENGTH;
 
-	sdram->sdcs0 = (CFG_SDRAM_BASE | i);
-	sdram->sdcs1 = (CFG_SDRAM_BASE1 | i);
+	sdram->sdcs0 = (CONFIG_SYS_SDRAM_BASE | i);
+	sdram->sdcs1 = (CONFIG_SYS_SDRAM_BASE1 | i);
 
-	sdram->sdcfg1 = CFG_SDRAM_CFG1;
-	sdram->sdcfg2 = CFG_SDRAM_CFG2;
+	sdram->sdcfg1 = CONFIG_SYS_SDRAM_CFG1;
+	sdram->sdcfg2 = CONFIG_SYS_SDRAM_CFG2;
 
 	/* Issue PALL */
-	sdram->sdcr = CFG_SDRAM_CTRL | 2;
+	sdram->sdcr = CONFIG_SYS_SDRAM_CTRL | 2;
 
 	/* Issue LEMR */
-	sdram->sdmr = CFG_SDRAM_EMOD | 0x408;
-	sdram->sdmr = CFG_SDRAM_MODE | 0x300;
+	sdram->sdmr = CONFIG_SYS_SDRAM_EMOD | 0x408;
+	sdram->sdmr = CONFIG_SYS_SDRAM_MODE | 0x300;
 
 	udelay(500);
 
 	/* Issue PALL */
-	sdram->sdcr = CFG_SDRAM_CTRL | 2;
+	sdram->sdcr = CONFIG_SYS_SDRAM_CTRL | 2;
 
 	/* Perform two refresh cycles */
-	sdram->sdcr = CFG_SDRAM_CTRL | 4;
-	sdram->sdcr = CFG_SDRAM_CTRL | 4;
+	sdram->sdcr = CONFIG_SYS_SDRAM_CTRL | 4;
+	sdram->sdcr = CONFIG_SYS_SDRAM_CTRL | 4;
 
-	sdram->sdmr = CFG_SDRAM_MODE | 0x200;
+	sdram->sdmr = CONFIG_SYS_SDRAM_MODE | 0x200;
 
-	sdram->sdcr = (CFG_SDRAM_CTRL & ~0x80000000) | 0x10000c00;
+	sdram->sdcr = (CONFIG_SYS_SDRAM_CTRL & ~0x80000000) | 0x10000c00;
 
 	udelay(100);
 #endif
@@ -175,11 +175,11 @@ void pci_init_board(void)
 #include <flash.h>
 ulong board_flash_get_legacy (ulong base, int banknum, flash_info_t * info)
 {
-	int sect[] = CFG_ATMEL_SECT;
-	int sectsz[] = CFG_ATMEL_SECTSZ;
+	int sect[] = CONFIG_SYS_ATMEL_SECT;
+	int sectsz[] = CONFIG_SYS_ATMEL_SECTSZ;
 	int i, j, k;
 
-	if (base != CFG_ATMEL_BASE)
+	if (base != CONFIG_SYS_ATMEL_BASE)
 		return 0;
 
 	info->flash_id          = 0x01000000;
@@ -205,9 +205,9 @@ ulong board_flash_get_legacy (ulong base, int banknum, flash_info_t * info)
 	info->name              = "CFI conformant";
 
 	info->size              = 0;
-	info->sector_count      = CFG_ATMEL_TOTALSECT;
+	info->sector_count      = CONFIG_SYS_ATMEL_TOTALSECT;
 	info->start[0] = base;
-	for (k = 0, i = 0; i < CFG_ATMEL_REGION; i++) {
+	for (k = 0, i = 0; i < CONFIG_SYS_ATMEL_REGION; i++) {
 		info->size += sect[i] * sectsz[i];
 
 		for (j = 0; j < sect[i]; j++, k++) {
@@ -218,4 +218,4 @@ ulong board_flash_get_legacy (ulong base, int banknum, flash_info_t * info)
 
 	return 1;
 }
-#endif				/* CFG_FLASH_CFI */
+#endif				/* CONFIG_SYS_FLASH_CFI */
diff --git a/board/freescale/m54455evb/mii.c b/board/freescale/m54455evb/mii.c
deleted file mode 100644
index 0be5439ef..000000000
--- a/board/freescale/m54455evb/mii.c
+++ /dev/null
@@ -1,324 +0,0 @@
-/*
- * Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
- * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/fec.h>
-#include <asm/immap.h>
-
-#include <config.h>
-#include <net.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#if defined(CONFIG_CMD_NET) && defined(CONFIG_NET_MULTI)
-#undef MII_DEBUG
-#undef ET_DEBUG
-
-int fecpin_setclear(struct eth_device *dev, int setclear)
-{
-	volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO;
-	struct fec_info_s *info = (struct fec_info_s *)dev->priv;
-
-	if (setclear) {
-		gpio->par_feci2c |=
-		    (GPIO_PAR_FECI2C_MDC0_MDC0 | GPIO_PAR_FECI2C_MDIO0_MDIO0);
-
-		if (info->iobase == CFG_FEC0_IOBASE)
-			gpio->par_fec |= GPIO_PAR_FEC_FEC0_RMII_GPIO;
-		else
-			gpio->par_fec |= GPIO_PAR_FEC_FEC1_RMII_ATA;
-	} else {
-		gpio->par_feci2c &=
-		    ~(GPIO_PAR_FECI2C_MDC0_MDC0 | GPIO_PAR_FECI2C_MDIO0_MDIO0);
-
-		if (info->iobase == CFG_FEC0_IOBASE)
-			gpio->par_fec &= GPIO_PAR_FEC_FEC0_MASK;
-		else
-			gpio->par_fec &= GPIO_PAR_FEC_FEC1_MASK;
-	}
-	return 0;
-}
-
-#if defined(CFG_DISCOVER_PHY) || defined(CONFIG_CMD_MII)
-#include <miiphy.h>
-
-/* Make MII read/write commands for the FEC. */
-#define mk_mii_read(ADDR, REG)	(0x60020000 | ((ADDR << 23) | (REG & 0x1f) << 18))
-
-#define mk_mii_write(ADDR, REG, VAL)	(0x50020000 | ((ADDR << 23) | (REG & 0x1f) << 18) | (VAL & 0xffff))
-
-/* PHY identification */
-#define PHY_ID_LXT970		0x78100000	/* LXT970 */
-#define PHY_ID_LXT971		0x001378e0	/* LXT971 and 972 */
-#define PHY_ID_82555		0x02a80150	/* Intel 82555 */
-#define PHY_ID_QS6612		0x01814400	/* QS6612 */
-#define PHY_ID_AMD79C784	0x00225610	/* AMD 79C784 */
-#define PHY_ID_LSI80225		0x0016f870	/* LSI 80225 */
-#define PHY_ID_LSI80225B	0x0016f880	/* LSI 80225/B */
-#define PHY_ID_DP83848VV	0x20005C90	/* National 83848 */
-#define PHY_ID_DP83849		0x20005CA2	/* National 82849 */
-
-#define STR_ID_LXT970		"LXT970"
-#define STR_ID_LXT971		"LXT971"
-#define STR_ID_82555		"Intel82555"
-#define STR_ID_QS6612		"QS6612"
-#define STR_ID_AMD79C784	"AMD79C784"
-#define STR_ID_LSI80225		"LSI80225"
-#define STR_ID_LSI80225B	"LSI80225/B"
-#define STR_ID_DP83848VV	"N83848"
-#define STR_ID_DP83849		"N83849"
-
-/****************************************************************************
- * mii_init -- Initialize the MII for MII command without ethernet
- * This function is a subset of eth_init
- ****************************************************************************
- */
-void mii_reset(struct fec_info_s *info)
-{
-	volatile fec_t *fecp = (fec_t *) (info->miibase);
-	struct eth_device *dev;
-	int i, miispd;
-	u16 rst = 0;
-
-	dev = eth_get_dev();
-
-	miispd = (gd->bus_clk / 1000000) / 5;
-	fecp->mscr = miispd << 1;
-
-	miiphy_write(dev->name, info->phy_addr, PHY_BMCR, PHY_BMCR_RESET);
-	for (i = 0; i < FEC_RESET_DELAY; ++i) {
-		udelay(500);
-		miiphy_read(dev->name, info->phy_addr, PHY_BMCR, &rst);
-		if ((rst & PHY_BMCR_RESET) == 0)
-			break;
-	}
-	if (i == FEC_RESET_DELAY)
-		printf("Mii reset timeout %d\n", i);
-}
-
-/* send command to phy using mii, wait for result */
-uint mii_send(uint mii_cmd)
-{
-	struct fec_info_s *info;
-	struct eth_device *dev;
-	volatile fec_t *ep;
-	uint mii_reply;
-	int j = 0;
-
-	/* retrieve from register structure */
-	dev = eth_get_dev();
-	info = dev->priv;
-
-	ep = (fec_t *) info->miibase;
-
-	ep->mmfr = mii_cmd;	/* command to phy */
-
-	/* wait for mii complete */
-	while (!(ep->eir & FEC_EIR_MII) && (j < MCFFEC_TOUT_LOOP)) {
-		udelay(1);
-		j++;
-	}
-	if (j >= MCFFEC_TOUT_LOOP) {
-		printf("MII not complete\n");
-		return -1;
-	}
-
-	mii_reply = ep->mmfr;	/* result from phy */
-	ep->eir = FEC_EIR_MII;	/* clear MII complete */
-#ifdef ET_DEBUG
-	printf("%s[%d] %s: sent=0x%8.8x, reply=0x%8.8x\n",
-	       __FILE__, __LINE__, __FUNCTION__, mii_cmd, mii_reply);
-#endif
-
-	return (mii_reply & 0xffff);	/* data read from phy */
-}
-#endif				/* CFG_DISCOVER_PHY || (CONFIG_MII) */
-
-#if defined(CFG_DISCOVER_PHY)
-int mii_discover_phy(struct eth_device *dev)
-{
-#define MAX_PHY_PASSES 11
-	struct fec_info_s *info = dev->priv;
-	int phyaddr, pass;
-	uint phyno, phytype;
-
-	if (info->phyname_init)
-		return info->phy_addr;
-
-	phyaddr = -1;		/* didn't find a PHY yet */
-	for (pass = 1; pass <= MAX_PHY_PASSES && phyaddr < 0; ++pass) {
-		if (pass > 1) {
-			/* PHY may need more time to recover from reset.
-			 * The LXT970 needs 50ms typical, no maximum is
-			 * specified, so wait 10ms before try again.
-			 * With 11 passes this gives it 100ms to wake up.
-			 */
-			udelay(10000);	/* wait 10ms */
-		}
-
-		for (phyno = 0; phyno < 32 && phyaddr < 0; ++phyno) {
-
-			phytype = mii_send(mk_mii_read(phyno, PHY_PHYIDR1));
-#ifdef ET_DEBUG
-			printf("PHY type 0x%x pass %d type\n", phytype, pass);
-#endif
-			if (phytype != 0xffff) {
-				phyaddr = phyno;
-				phytype <<= 16;
-				phytype |=
-				    mii_send(mk_mii_read(phyno, PHY_PHYIDR2));
-
-				switch (phytype & 0xffffffff) {
-				case PHY_ID_DP83848VV:
-					strcpy(info->phy_name,
-					       STR_ID_DP83848VV);
-					info->phyname_init = 1;
-					break;
-				default:
-					strcpy(info->phy_name, "unknown");
-					info->phyname_init = 1;
-					break;
-				}
-
-#ifdef ET_DEBUG
-				printf("PHY @ 0x%x pass %d type ", phyno, pass);
-				switch (phytype & 0xffffffff) {
-				case PHY_ID_DP83848VV:
-					printf(STR_ID_DP83848VV);
-					break;
-				default:
-					printf("0x%08x\n", phytype);
-					break;
-				}
-#endif
-			}
-		}
-	}
-	if (phyaddr < 0)
-		printf("No PHY device found.\n");
-
-	return phyaddr;
-}
-#endif				/* CFG_DISCOVER_PHY */
-
-void mii_init(void) __attribute__((weak,alias("__mii_init")));
-
-void __mii_init(void)
-{
-	volatile fec_t *fecp;
-	struct fec_info_s *info;
-	struct eth_device *dev;
-	int miispd = 0, i = 0;
-	u16 autoneg = 0;
-
-	/* retrieve from register structure */
-	dev = eth_get_dev();
-	info = dev->priv;
-
-	fecp = (fec_t *) info->miibase;
-
-	fecpin_setclear(dev, 1);
-
-	mii_reset(info);
-
-	/* We use strictly polling mode only */
-	fecp->eimr = 0;
-
-	/* Clear any pending interrupt */
-	fecp->eir = 0xffffffff;
-
-	/* Set MII speed */
-	miispd = (gd->bus_clk / 1000000) / 5;
-	fecp->mscr = miispd << 1;
-
-	info->phy_addr = mii_discover_phy(dev);
-
-#define AUTONEGLINK		(PHY_BMSR_AUTN_COMP | PHY_BMSR_LS)
-	while (i < MCFFEC_TOUT_LOOP) {
-		autoneg = 0;
-		miiphy_read(dev->name, info->phy_addr, PHY_BMSR, &autoneg);
-		i++;
-
-		if ((autoneg & AUTONEGLINK) == AUTONEGLINK)
-			break;
-
-		udelay(500);
-	}
-	if (i >= MCFFEC_TOUT_LOOP) {
-		printf("Auto Negotiation not complete\n");
-	}
-
-	/* adapt to the half/full speed settings */
-	info->dup_spd = miiphy_duplex(dev->name, info->phy_addr) << 16;
-	info->dup_spd |= miiphy_speed(dev->name, info->phy_addr);
-}
-
-/*****************************************************************************
- * Read and write a MII PHY register, routines used by MII Utilities
- *
- * FIXME: These routines are expected to return 0 on success, but mii_send
- *	  does _not_ return an error code. Maybe 0xFFFF means error, i.e.
- *	  no PHY connected...
- *	  For now always return 0.
- * FIXME: These routines only work after calling eth_init() at least once!
- *	  Otherwise they hang in mii_send() !!! Sorry!
- *****************************************************************************/
-
-int mcffec_miiphy_read(char *devname, unsigned char addr, unsigned char reg,
-		       unsigned short *value)
-{
-	short rdreg;		/* register working value */
-
-#ifdef MII_DEBUG
-	printf("miiphy_read(0x%x) @ 0x%x = ", reg, addr);
-#endif
-	rdreg = mii_send(mk_mii_read(addr, reg));
-
-	*value = rdreg;
-
-#ifdef MII_DEBUG
-	printf("0x%04x\n", *value);
-#endif
-
-	return 0;
-}
-
-int mcffec_miiphy_write(char *devname, unsigned char addr, unsigned char reg,
-			unsigned short value)
-{
-	short rdreg;		/* register working value */
-
-#ifdef MII_DEBUG
-	printf("miiphy_write(0x%x) @ 0x%x = ", reg, addr);
-#endif
-
-	rdreg = mii_send(mk_mii_write(addr, reg, value));
-
-#ifdef MII_DEBUG
-	printf("0x%04x\n", value);
-#endif
-
-	return 0;
-}
-
-#endif				/* CONFIG_CMD_NET, FEC_ENET & NET_MULTI */
diff --git a/board/freescale/m54455evb/u-boot.atm b/board/freescale/m54455evb/u-boot.atm
index 22c604865..08e184c1e 100644
--- a/board/freescale/m54455evb/u-boot.atm
+++ b/board/freescale/m54455evb/u-boot.atm
@@ -62,7 +62,7 @@ SECTIONS
     lib_generic/zlib.o		(.text)
 
     . = DEFINED(env_offset) ? env_offset : .;
-    common/environment.o	(.text)
+    common/env_embedded.o	(.text)
 
     *(.text)
     *(.fixup)
diff --git a/board/freescale/m547xevb/Makefile b/board/freescale/m547xevb/Makefile
index 74c252869..981763d20 100644
--- a/board/freescale/m547xevb/Makefile
+++ b/board/freescale/m547xevb/Makefile
@@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk
 
 LIB	= $(obj)lib$(BOARD).a
 
-COBJS	= $(BOARD).o mii.o
+COBJS	= $(BOARD).o
 
 SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
 OBJS	:= $(addprefix $(obj),$(COBJS))
diff --git a/board/freescale/m547xevb/m547xevb.c b/board/freescale/m547xevb/m547xevb.c
index 6d7d27090..9f1ec3854 100644
--- a/board/freescale/m547xevb/m547xevb.c
+++ b/board/freescale/m547xevb/m547xevb.c
@@ -43,53 +43,53 @@ phys_size_t initdram(int board_type)
 	volatile siu_t *siu = (siu_t *) (MMAP_SIU);
 	volatile sdram_t *sdram = (volatile sdram_t *)(MMAP_SDRAM);
 	u32 dramsize, i;
-#ifdef CFG_DRAMSZ1
+#ifdef CONFIG_SYS_DRAMSZ1
 	u32 temp;
 #endif
 
-	siu->drv = CFG_SDRAM_DRVSTRENGTH;
+	siu->drv = CONFIG_SYS_SDRAM_DRVSTRENGTH;
 
-	dramsize = CFG_DRAMSZ * 0x100000;
+	dramsize = CONFIG_SYS_DRAMSZ * 0x100000;
 	for (i = 0x13; i < 0x20; i++) {
 		if (dramsize == (1 << i))
 			break;
 	}
 	i--;
-	siu->cs0cfg = (CFG_SDRAM_BASE | i);
+	siu->cs0cfg = (CONFIG_SYS_SDRAM_BASE | i);
 
-#ifdef CFG_DRAMSZ1
-	temp = CFG_DRAMSZ1 * 0x100000;
+#ifdef CONFIG_SYS_DRAMSZ1
+	temp = CONFIG_SYS_DRAMSZ1 * 0x100000;
 	for (i = 0x13; i < 0x20; i++) {
 		if (temp == (1 << i))
 			break;
 	}
 	i--;
 	dramsize += temp;
-	siu->cs1cfg = ((CFG_SDRAM_BASE + temp) | i);
+	siu->cs1cfg = ((CONFIG_SYS_SDRAM_BASE + temp) | i);
 #endif
 
-	sdram->cfg1 = CFG_SDRAM_CFG1;
-	sdram->cfg2 = CFG_SDRAM_CFG2;
+	sdram->cfg1 = CONFIG_SYS_SDRAM_CFG1;
+	sdram->cfg2 = CONFIG_SYS_SDRAM_CFG2;
 
 	/* Issue PALL */
-	sdram->ctrl = CFG_SDRAM_CTRL | 2;
+	sdram->ctrl = CONFIG_SYS_SDRAM_CTRL | 2;
 
 	/* Issue LEMR */
-	sdram->mode = CFG_SDRAM_EMOD;
-	sdram->mode = (CFG_SDRAM_MODE | 0x04000000);
+	sdram->mode = CONFIG_SYS_SDRAM_EMOD;
+	sdram->mode = (CONFIG_SYS_SDRAM_MODE | 0x04000000);
 
 	udelay(500);
 
 	/* Issue PALL */
-	sdram->ctrl = (CFG_SDRAM_CTRL | 2);
+	sdram->ctrl = (CONFIG_SYS_SDRAM_CTRL | 2);
 
 	/* Perform two refresh cycles */
-	sdram->ctrl = CFG_SDRAM_CTRL | 4;
-	sdram->ctrl = CFG_SDRAM_CTRL | 4;
+	sdram->ctrl = CONFIG_SYS_SDRAM_CTRL | 4;
+	sdram->ctrl = CONFIG_SYS_SDRAM_CTRL | 4;
 
-	sdram->mode = CFG_SDRAM_MODE;
+	sdram->mode = CONFIG_SYS_SDRAM_MODE;
 
-	sdram->ctrl = (CFG_SDRAM_CTRL & ~0x80000000) | 0x10000F00;
+	sdram->ctrl = (CONFIG_SYS_SDRAM_CTRL & ~0x80000000) | 0x10000F00;
 
 	udelay(100);
 
diff --git a/board/freescale/m547xevb/mii.c b/board/freescale/m547xevb/mii.c
deleted file mode 100644
index 5b2683b6c..000000000
--- a/board/freescale/m547xevb/mii.c
+++ /dev/null
@@ -1,322 +0,0 @@
-/*
- * Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
- * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <config.h>
-#include <net.h>
-
-#include <asm/immap.h>
-#include <asm/fec.h>
-#include <asm/fsl_mcdmafec.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#if defined(CONFIG_CMD_NET) && defined(CONFIG_NET_MULTI)
-#undef MII_DEBUG
-#undef ET_DEBUG
-
-int fecpin_setclear(struct eth_device *dev, int setclear)
-{
-	volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO;
-	struct fec_info_dma *info = (struct fec_info_dma *)dev->priv;
-
-	if (setclear) {
-		if (info->iobase == CFG_FEC0_IOBASE)
-			gpio->par_feci2cirq |= 0xF000;
-		else
-			gpio->par_feci2cirq |= 0x0FC0;
-	} else {
-		if (info->iobase == CFG_FEC0_IOBASE)
-			gpio->par_feci2cirq &= 0x0FFF;
-		else
-			gpio->par_feci2cirq &= 0xF03F;
-	}
-	return 0;
-}
-
-#if defined(CFG_DISCOVER_PHY) || defined(CONFIG_CMD_MII)
-#include <miiphy.h>
-
-/* Make MII read/write commands for the FEC. */
-#define mk_mii_read(ADDR, REG)	(0x60020000 | ((ADDR << 23) | (REG & 0x1f) << 18))
-
-#define mk_mii_write(ADDR, REG, VAL)	(0x50020000 | ((ADDR << 23) | (REG & 0x1f) << 18) | (VAL & 0xffff))
-
-/* PHY identification */
-#define PHY_ID_LXT970		0x78100000	/* LXT970 */
-#define PHY_ID_LXT971		0x001378e0	/* LXT971 and 972 */
-#define PHY_ID_82555		0x02a80150	/* Intel 82555 */
-#define PHY_ID_QS6612		0x01814400	/* QS6612 */
-#define PHY_ID_AMD79C784	0x00225610	/* AMD 79C784 */
-#define PHY_ID_LSI80225		0x0016f870	/* LSI 80225 */
-#define PHY_ID_LSI80225B	0x0016f880	/* LSI 80225/B */
-#define PHY_ID_DP83848VV	0x20005C90	/* National 83848 */
-#define PHY_ID_DP83849		0x20005CA2	/* National 82849 */
-#define PHY_ID_BCM5222		0x00406322	/* Broadcom 5222 */
-
-#define STR_ID_LXT970		"LXT970"
-#define STR_ID_LXT971		"LXT971"
-#define STR_ID_82555		"Intel82555"
-#define STR_ID_QS6612		"QS6612"
-#define STR_ID_AMD79C784	"AMD79C784"
-#define STR_ID_LSI80225		"LSI80225"
-#define STR_ID_LSI80225B	"LSI80225/B"
-#define STR_ID_DP83848VV	"N83848"
-#define STR_ID_DP83849		"N83849"
-#define STR_ID_BCM5222		"BCM5222"
-
-/****************************************************************************
- * mii_init -- Initialize the MII for MII command without ethernet
- * This function is a subset of eth_init
- ****************************************************************************
- */
-void mii_reset(struct fec_info_dma *info)
-{
-	volatile fecdma_t *fecp = (fecdma_t *) (info->miibase);
-	int i;
-
-	fecp->ecr = FEC_ECR_RESET;
-	for (i = 0; (fecp->ecr & FEC_ECR_RESET) && (i < FEC_RESET_DELAY); ++i) {
-		udelay(1);
-	}
-	if (i == FEC_RESET_DELAY) {
-		printf("FEC_RESET_DELAY timeout\n");
-	}
-}
-
-/* send command to phy using mii, wait for result */
-uint mii_send(uint mii_cmd)
-{
-	struct fec_info_dma *info;
-	struct eth_device *dev;
-	volatile fecdma_t *ep;
-	uint mii_reply;
-	int j = 0;
-
-	/* retrieve from register structure */
-	dev = eth_get_dev();
-	info = dev->priv;
-
-	ep = (fecdma_t *) info->miibase;
-
-	ep->mmfr = mii_cmd;	/* command to phy */
-
-	/* wait for mii complete */
-	while (!(ep->eir & FEC_EIR_MII) && (j < MCFFEC_TOUT_LOOP)) {
-		udelay(1);
-		j++;
-	}
-	if (j >= MCFFEC_TOUT_LOOP) {
-		printf("MII not complete\n");
-		return -1;
-	}
-
-	mii_reply = ep->mmfr;	/* result from phy */
-	ep->eir = FEC_EIR_MII;	/* clear MII complete */
-#ifdef ET_DEBUG
-	printf("%s[%d] %s: sent=0x%8.8x, reply=0x%8.8x\n",
-	       __FILE__, __LINE__, __FUNCTION__, mii_cmd, mii_reply);
-#endif
-
-	return (mii_reply & 0xffff);	/* data read from phy */
-}
-#endif				/* CFG_DISCOVER_PHY || CONFIG_CMD_MII */
-
-#if defined(CFG_DISCOVER_PHY)
-int mii_discover_phy(struct eth_device *dev)
-{
-#define MAX_PHY_PASSES 11
-	struct fec_info_dma *info = dev->priv;
-	int phyaddr, pass, temp;
-	uint phyno, phytype;
-
-	if (info->phyname_init) {
-		return info->phy_addr;
-	}
-
-	phyaddr = -1;		/* didn't find a PHY yet */
-	for (pass = 1; pass <= MAX_PHY_PASSES && phyaddr < 0; ++pass) {
-		if (pass > 1) {
-			/* PHY may need more time to recover from reset.
-			 * The LXT970 needs 50ms typical, no maximum is
-			 * specified, so wait 10ms before try again.
-			 * With 11 passes this gives it 100ms to wake up.
-			 */
-			udelay(10000);	/* wait 10ms */
-		}
-
-		temp = 0;
-		if (info->index > 0) {
-			/* Some phy have multiple address, to solve the issue
-			   where phyno keeps starting from 0, check the
-			   previous phy address if both miibase are the same. */
-			if (info->miibase == (info->next)->miibase) {
-				temp = (info->next)->phy_addr + 1;
-			}
-		}
-
-		for (phyno = temp; phyno < 32 && phyaddr < 0; ++phyno) {
-
-			phytype = mii_send(mk_mii_read(phyno, PHY_PHYIDR1));
-#ifdef ET_DEBUG
-			printf("PHY type 0x%x pass %d type\n", phytype, pass);
-#endif
-			if (phytype != 0xffff) {
-				phyaddr = phyno;
-				phytype <<= 16;
-				phytype |=
-				    mii_send(mk_mii_read(phyno, PHY_PHYIDR2));
-
-				switch (phytype & 0xffffffff) {
-				case PHY_ID_BCM5222:
-					strcpy(info->phy_name, STR_ID_BCM5222);
-					info->phyname_init = 1;
-					break;
-				default:
-					strcpy(info->phy_name, "unknown");
-					info->phyname_init = 1;
-					break;
-				}
-
-#ifdef ET_DEBUG
-				printf("PHY @ 0x%x pass %d type ", phyno, pass);
-				switch (phytype & 0xffffffff) {
-				case PHY_ID_BCM5222:
-					printf(STR_ID_BCM5222);
-					break;
-				default:
-					printf("0x%08x\n", phytype);
-					break;
-				}
-#endif
-			}
-		}
-	}
-	if (phyaddr < 0)
-		printf("No PHY device found.\n");
-
-	return phyaddr;
-}
-#endif				/* CFG_DISCOVER_PHY */
-
-void mii_init(void) __attribute__ ((weak, alias("__mii_init")));
-
-void __mii_init(void)
-{
-	volatile fecdma_t *fecp;
-	struct fec_info_dma *info;
-	struct eth_device *dev;
-	int miispd = 0, i = 0;
-	u16 autoneg = 0;
-
-	/* retrieve from register structure */
-	dev = eth_get_dev();
-	info = dev->priv;
-
-	fecp = (fecdma_t *) info->miibase;
-
-	fecpin_setclear(dev, 1);
-
-	mii_reset(info);
-
-	/* We use strictly polling mode only */
-	fecp->eimr = 0;
-
-	/* Clear any pending interrupt */
-	fecp->eir = 0xffffffff;
-
-	/* Set MII speed */
-	miispd = (gd->bus_clk / 1000000) / 5;
-	fecp->mscr = miispd << 1;
-
-	info->phy_addr = mii_discover_phy(dev);
-
-#define AUTONEGLINK		(PHY_BMSR_AUTN_COMP | PHY_BMSR_LS)
-	while (i < MCFFEC_TOUT_LOOP) {
-		autoneg = 0;
-		miiphy_read(dev->name, info->phy_addr, PHY_BMSR, &autoneg);
-		i++;
-
-		if ((autoneg & AUTONEGLINK) == AUTONEGLINK)
-			break;
-
-		udelay(500);
-	}
-	if (i >= MCFFEC_TOUT_LOOP) {
-		printf("Auto Negotiation not complete\n");
-	}
-
-	/* adapt to the half/full speed settings */
-	info->dup_spd = miiphy_duplex(dev->name, info->phy_addr) << 16;
-	info->dup_spd |= miiphy_speed(dev->name, info->phy_addr);
-}
-
-/*****************************************************************************
- * Read and write a MII PHY register, routines used by MII Utilities
- *
- * FIXME: These routines are expected to return 0 on success, but mii_send
- *	  does _not_ return an error code. Maybe 0xFFFF means error, i.e.
- *	  no PHY connected...
- *	  For now always return 0.
- * FIXME: These routines only work after calling eth_init() at least once!
- *	  Otherwise they hang in mii_send() !!! Sorry!
- *****************************************************************************/
-
-int mcffec_miiphy_read(char *devname, unsigned char addr, unsigned char reg,
-		       unsigned short *value)
-{
-	short rdreg;		/* register working value */
-
-#ifdef MII_DEBUG
-	printf("miiphy_read(0x%x) @ 0x%x = ", reg, addr);
-#endif
-	rdreg = mii_send(mk_mii_read(addr, reg));
-
-	*value = rdreg;
-
-#ifdef MII_DEBUG
-	printf("0x%04x\n", *value);
-#endif
-
-	return 0;
-}
-
-int mcffec_miiphy_write(char *devname, unsigned char addr, unsigned char reg,
-			unsigned short value)
-{
-	short rdreg;		/* register working value */
-
-#ifdef MII_DEBUG
-	printf("miiphy_write(0x%x) @ 0x%x = ", reg, addr);
-#endif
-
-	rdreg = mii_send(mk_mii_write(addr, reg, value));
-
-#ifdef MII_DEBUG
-	printf("0x%04x\n", value);
-#endif
-
-	return 0;
-}
-
-#endif				/* CONFIG_CMD_NET, FEC_ENET & NET_MULTI */
diff --git a/board/freescale/m547xevb/u-boot.lds b/board/freescale/m547xevb/u-boot.lds
index cc7f3eba8..c25c8dcdc 100644
--- a/board/freescale/m547xevb/u-boot.lds
+++ b/board/freescale/m547xevb/u-boot.lds
@@ -61,7 +61,7 @@ SECTIONS
     common/dlmalloc.o		(.text)
 
     . = DEFINED(env_offset) ? env_offset : .;
-    common/environment.o	(.text)
+    common/env_embedded.o	(.text)
 
     *(.text)
     *(.fixup)
diff --git a/board/freescale/m548xevb/Makefile b/board/freescale/m548xevb/Makefile
index 74c252869..981763d20 100644
--- a/board/freescale/m548xevb/Makefile
+++ b/board/freescale/m548xevb/Makefile
@@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk
 
 LIB	= $(obj)lib$(BOARD).a
 
-COBJS	= $(BOARD).o mii.o
+COBJS	= $(BOARD).o
 
 SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
 OBJS	:= $(addprefix $(obj),$(COBJS))
diff --git a/board/freescale/m548xevb/m548xevb.c b/board/freescale/m548xevb/m548xevb.c
index e6510c955..4a2a5c78f 100644
--- a/board/freescale/m548xevb/m548xevb.c
+++ b/board/freescale/m548xevb/m548xevb.c
@@ -44,49 +44,49 @@ phys_size_t initdram(int board_type)
 	volatile sdram_t *sdram = (volatile sdram_t *)(MMAP_SDRAM);
 	u32 dramsize, i;
 
-	siu->drv = CFG_SDRAM_DRVSTRENGTH;
+	siu->drv = CONFIG_SYS_SDRAM_DRVSTRENGTH;
 
-	dramsize = CFG_DRAMSZ * 0x100000;
+	dramsize = CONFIG_SYS_DRAMSZ * 0x100000;
 	for (i = 0x13; i < 0x20; i++) {
 		if (dramsize == (1 << i))
 			break;
 	}
 	i--;
-	siu->cs0cfg = (CFG_SDRAM_BASE | i);
+	siu->cs0cfg = (CONFIG_SYS_SDRAM_BASE | i);
 
-#ifdef CFG_DRAMSZ1
-	temp = CFG_DRAMSZ1 * 0x100000;
+#ifdef CONFIG_SYS_DRAMSZ1
+	temp = CONFIG_SYS_DRAMSZ1 * 0x100000;
 	for (i = 0x13; i < 0x20; i++) {
 		if (temp == (1 << i))
 			break;
 	}
 	i--;
 	dramsize += temp;
-	siu->cs1cfg = ((CFG_SDRAM_BASE + temp) | i);
+	siu->cs1cfg = ((CONFIG_SYS_SDRAM_BASE + temp) | i);
 #endif
 
-	sdram->cfg1 = CFG_SDRAM_CFG1;
-	sdram->cfg2 = CFG_SDRAM_CFG2;
+	sdram->cfg1 = CONFIG_SYS_SDRAM_CFG1;
+	sdram->cfg2 = CONFIG_SYS_SDRAM_CFG2;
 
 	/* Issue PALL */
-	sdram->ctrl = CFG_SDRAM_CTRL | 2;
+	sdram->ctrl = CONFIG_SYS_SDRAM_CTRL | 2;
 
 	/* Issue LEMR */
-	sdram->mode = CFG_SDRAM_EMOD;
-	sdram->mode = (CFG_SDRAM_MODE | 0x04000000);
+	sdram->mode = CONFIG_SYS_SDRAM_EMOD;
+	sdram->mode = (CONFIG_SYS_SDRAM_MODE | 0x04000000);
 
 	udelay(500);
 
 	/* Issue PALL */
-	sdram->ctrl = (CFG_SDRAM_CTRL | 2);
+	sdram->ctrl = (CONFIG_SYS_SDRAM_CTRL | 2);
 
 	/* Perform two refresh cycles */
-	sdram->ctrl = CFG_SDRAM_CTRL | 4;
-	sdram->ctrl = CFG_SDRAM_CTRL | 4;
+	sdram->ctrl = CONFIG_SYS_SDRAM_CTRL | 4;
+	sdram->ctrl = CONFIG_SYS_SDRAM_CTRL | 4;
 
-	sdram->mode = CFG_SDRAM_MODE;
+	sdram->mode = CONFIG_SYS_SDRAM_MODE;
 
-	sdram->ctrl = (CFG_SDRAM_CTRL & ~0x80000000) | 0x10000F00;
+	sdram->ctrl = (CONFIG_SYS_SDRAM_CTRL & ~0x80000000) | 0x10000F00;
 
 	udelay(100);
 
diff --git a/board/freescale/m548xevb/mii.c b/board/freescale/m548xevb/mii.c
deleted file mode 100644
index 5b2683b6c..000000000
--- a/board/freescale/m548xevb/mii.c
+++ /dev/null
@@ -1,322 +0,0 @@
-/*
- * Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
- * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <config.h>
-#include <net.h>
-
-#include <asm/immap.h>
-#include <asm/fec.h>
-#include <asm/fsl_mcdmafec.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#if defined(CONFIG_CMD_NET) && defined(CONFIG_NET_MULTI)
-#undef MII_DEBUG
-#undef ET_DEBUG
-
-int fecpin_setclear(struct eth_device *dev, int setclear)
-{
-	volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO;
-	struct fec_info_dma *info = (struct fec_info_dma *)dev->priv;
-
-	if (setclear) {
-		if (info->iobase == CFG_FEC0_IOBASE)
-			gpio->par_feci2cirq |= 0xF000;
-		else
-			gpio->par_feci2cirq |= 0x0FC0;
-	} else {
-		if (info->iobase == CFG_FEC0_IOBASE)
-			gpio->par_feci2cirq &= 0x0FFF;
-		else
-			gpio->par_feci2cirq &= 0xF03F;
-	}
-	return 0;
-}
-
-#if defined(CFG_DISCOVER_PHY) || defined(CONFIG_CMD_MII)
-#include <miiphy.h>
-
-/* Make MII read/write commands for the FEC. */
-#define mk_mii_read(ADDR, REG)	(0x60020000 | ((ADDR << 23) | (REG & 0x1f) << 18))
-
-#define mk_mii_write(ADDR, REG, VAL)	(0x50020000 | ((ADDR << 23) | (REG & 0x1f) << 18) | (VAL & 0xffff))
-
-/* PHY identification */
-#define PHY_ID_LXT970		0x78100000	/* LXT970 */
-#define PHY_ID_LXT971		0x001378e0	/* LXT971 and 972 */
-#define PHY_ID_82555		0x02a80150	/* Intel 82555 */
-#define PHY_ID_QS6612		0x01814400	/* QS6612 */
-#define PHY_ID_AMD79C784	0x00225610	/* AMD 79C784 */
-#define PHY_ID_LSI80225		0x0016f870	/* LSI 80225 */
-#define PHY_ID_LSI80225B	0x0016f880	/* LSI 80225/B */
-#define PHY_ID_DP83848VV	0x20005C90	/* National 83848 */
-#define PHY_ID_DP83849		0x20005CA2	/* National 82849 */
-#define PHY_ID_BCM5222		0x00406322	/* Broadcom 5222 */
-
-#define STR_ID_LXT970		"LXT970"
-#define STR_ID_LXT971		"LXT971"
-#define STR_ID_82555		"Intel82555"
-#define STR_ID_QS6612		"QS6612"
-#define STR_ID_AMD79C784	"AMD79C784"
-#define STR_ID_LSI80225		"LSI80225"
-#define STR_ID_LSI80225B	"LSI80225/B"
-#define STR_ID_DP83848VV	"N83848"
-#define STR_ID_DP83849		"N83849"
-#define STR_ID_BCM5222		"BCM5222"
-
-/****************************************************************************
- * mii_init -- Initialize the MII for MII command without ethernet
- * This function is a subset of eth_init
- ****************************************************************************
- */
-void mii_reset(struct fec_info_dma *info)
-{
-	volatile fecdma_t *fecp = (fecdma_t *) (info->miibase);
-	int i;
-
-	fecp->ecr = FEC_ECR_RESET;
-	for (i = 0; (fecp->ecr & FEC_ECR_RESET) && (i < FEC_RESET_DELAY); ++i) {
-		udelay(1);
-	}
-	if (i == FEC_RESET_DELAY) {
-		printf("FEC_RESET_DELAY timeout\n");
-	}
-}
-
-/* send command to phy using mii, wait for result */
-uint mii_send(uint mii_cmd)
-{
-	struct fec_info_dma *info;
-	struct eth_device *dev;
-	volatile fecdma_t *ep;
-	uint mii_reply;
-	int j = 0;
-
-	/* retrieve from register structure */
-	dev = eth_get_dev();
-	info = dev->priv;
-
-	ep = (fecdma_t *) info->miibase;
-
-	ep->mmfr = mii_cmd;	/* command to phy */
-
-	/* wait for mii complete */
-	while (!(ep->eir & FEC_EIR_MII) && (j < MCFFEC_TOUT_LOOP)) {
-		udelay(1);
-		j++;
-	}
-	if (j >= MCFFEC_TOUT_LOOP) {
-		printf("MII not complete\n");
-		return -1;
-	}
-
-	mii_reply = ep->mmfr;	/* result from phy */
-	ep->eir = FEC_EIR_MII;	/* clear MII complete */
-#ifdef ET_DEBUG
-	printf("%s[%d] %s: sent=0x%8.8x, reply=0x%8.8x\n",
-	       __FILE__, __LINE__, __FUNCTION__, mii_cmd, mii_reply);
-#endif
-
-	return (mii_reply & 0xffff);	/* data read from phy */
-}
-#endif				/* CFG_DISCOVER_PHY || CONFIG_CMD_MII */
-
-#if defined(CFG_DISCOVER_PHY)
-int mii_discover_phy(struct eth_device *dev)
-{
-#define MAX_PHY_PASSES 11
-	struct fec_info_dma *info = dev->priv;
-	int phyaddr, pass, temp;
-	uint phyno, phytype;
-
-	if (info->phyname_init) {
-		return info->phy_addr;
-	}
-
-	phyaddr = -1;		/* didn't find a PHY yet */
-	for (pass = 1; pass <= MAX_PHY_PASSES && phyaddr < 0; ++pass) {
-		if (pass > 1) {
-			/* PHY may need more time to recover from reset.
-			 * The LXT970 needs 50ms typical, no maximum is
-			 * specified, so wait 10ms before try again.
-			 * With 11 passes this gives it 100ms to wake up.
-			 */
-			udelay(10000);	/* wait 10ms */
-		}
-
-		temp = 0;
-		if (info->index > 0) {
-			/* Some phy have multiple address, to solve the issue
-			   where phyno keeps starting from 0, check the
-			   previous phy address if both miibase are the same. */
-			if (info->miibase == (info->next)->miibase) {
-				temp = (info->next)->phy_addr + 1;
-			}
-		}
-
-		for (phyno = temp; phyno < 32 && phyaddr < 0; ++phyno) {
-
-			phytype = mii_send(mk_mii_read(phyno, PHY_PHYIDR1));
-#ifdef ET_DEBUG
-			printf("PHY type 0x%x pass %d type\n", phytype, pass);
-#endif
-			if (phytype != 0xffff) {
-				phyaddr = phyno;
-				phytype <<= 16;
-				phytype |=
-				    mii_send(mk_mii_read(phyno, PHY_PHYIDR2));
-
-				switch (phytype & 0xffffffff) {
-				case PHY_ID_BCM5222:
-					strcpy(info->phy_name, STR_ID_BCM5222);
-					info->phyname_init = 1;
-					break;
-				default:
-					strcpy(info->phy_name, "unknown");
-					info->phyname_init = 1;
-					break;
-				}
-
-#ifdef ET_DEBUG
-				printf("PHY @ 0x%x pass %d type ", phyno, pass);
-				switch (phytype & 0xffffffff) {
-				case PHY_ID_BCM5222:
-					printf(STR_ID_BCM5222);
-					break;
-				default:
-					printf("0x%08x\n", phytype);
-					break;
-				}
-#endif
-			}
-		}
-	}
-	if (phyaddr < 0)
-		printf("No PHY device found.\n");
-
-	return phyaddr;
-}
-#endif				/* CFG_DISCOVER_PHY */
-
-void mii_init(void) __attribute__ ((weak, alias("__mii_init")));
-
-void __mii_init(void)
-{
-	volatile fecdma_t *fecp;
-	struct fec_info_dma *info;
-	struct eth_device *dev;
-	int miispd = 0, i = 0;
-	u16 autoneg = 0;
-
-	/* retrieve from register structure */
-	dev = eth_get_dev();
-	info = dev->priv;
-
-	fecp = (fecdma_t *) info->miibase;
-
-	fecpin_setclear(dev, 1);
-
-	mii_reset(info);
-
-	/* We use strictly polling mode only */
-	fecp->eimr = 0;
-
-	/* Clear any pending interrupt */
-	fecp->eir = 0xffffffff;
-
-	/* Set MII speed */
-	miispd = (gd->bus_clk / 1000000) / 5;
-	fecp->mscr = miispd << 1;
-
-	info->phy_addr = mii_discover_phy(dev);
-
-#define AUTONEGLINK		(PHY_BMSR_AUTN_COMP | PHY_BMSR_LS)
-	while (i < MCFFEC_TOUT_LOOP) {
-		autoneg = 0;
-		miiphy_read(dev->name, info->phy_addr, PHY_BMSR, &autoneg);
-		i++;
-
-		if ((autoneg & AUTONEGLINK) == AUTONEGLINK)
-			break;
-
-		udelay(500);
-	}
-	if (i >= MCFFEC_TOUT_LOOP) {
-		printf("Auto Negotiation not complete\n");
-	}
-
-	/* adapt to the half/full speed settings */
-	info->dup_spd = miiphy_duplex(dev->name, info->phy_addr) << 16;
-	info->dup_spd |= miiphy_speed(dev->name, info->phy_addr);
-}
-
-/*****************************************************************************
- * Read and write a MII PHY register, routines used by MII Utilities
- *
- * FIXME: These routines are expected to return 0 on success, but mii_send
- *	  does _not_ return an error code. Maybe 0xFFFF means error, i.e.
- *	  no PHY connected...
- *	  For now always return 0.
- * FIXME: These routines only work after calling eth_init() at least once!
- *	  Otherwise they hang in mii_send() !!! Sorry!
- *****************************************************************************/
-
-int mcffec_miiphy_read(char *devname, unsigned char addr, unsigned char reg,
-		       unsigned short *value)
-{
-	short rdreg;		/* register working value */
-
-#ifdef MII_DEBUG
-	printf("miiphy_read(0x%x) @ 0x%x = ", reg, addr);
-#endif
-	rdreg = mii_send(mk_mii_read(addr, reg));
-
-	*value = rdreg;
-
-#ifdef MII_DEBUG
-	printf("0x%04x\n", *value);
-#endif
-
-	return 0;
-}
-
-int mcffec_miiphy_write(char *devname, unsigned char addr, unsigned char reg,
-			unsigned short value)
-{
-	short rdreg;		/* register working value */
-
-#ifdef MII_DEBUG
-	printf("miiphy_write(0x%x) @ 0x%x = ", reg, addr);
-#endif
-
-	rdreg = mii_send(mk_mii_write(addr, reg, value));
-
-#ifdef MII_DEBUG
-	printf("0x%04x\n", value);
-#endif
-
-	return 0;
-}
-
-#endif				/* CONFIG_CMD_NET, FEC_ENET & NET_MULTI */
diff --git a/board/freescale/m548xevb/u-boot.lds b/board/freescale/m548xevb/u-boot.lds
index cc7f3eba8..c25c8dcdc 100644
--- a/board/freescale/m548xevb/u-boot.lds
+++ b/board/freescale/m548xevb/u-boot.lds
@@ -61,7 +61,7 @@ SECTIONS
     common/dlmalloc.o		(.text)
 
     . = DEFINED(env_offset) ? env_offset : .;
-    common/environment.o	(.text)
+    common/env_embedded.o	(.text)
 
     *(.text)
     *(.fixup)
diff --git a/board/freescale/mpc7448hpc2/asm_init.S b/board/freescale/mpc7448hpc2/asm_init.S
index 521301fce..b9495fd34 100644
--- a/board/freescale/mpc7448hpc2/asm_init.S
+++ b/board/freescale/mpc7448hpc2/asm_init.S
@@ -123,7 +123,7 @@ board_asm_init:
 
 /* Initialize pointer to Tsi108 register space */
 
-	LOAD_PTR(r29,CFG_TSI108_CSR_RST_BASE)/* r29 - pointer to tsi108 CSR space */
+	LOAD_PTR(r29,CONFIG_SYS_TSI108_CSR_RST_BASE)/* r29 - pointer to tsi108 CSR space */
 	ori r4,r29,TSI108_PB_REG_OFFSET
 
 /* Check Processor Version Number */
@@ -214,12 +214,12 @@ do_tsi108_init:
 
 	ori r4,r29,TSI108_PB_REG_OFFSET
 
-#if (CFG_TSI108_CSR_BASE != CFG_TSI108_CSR_RST_BASE)
+#if (CONFIG_SYS_TSI108_CSR_BASE != CONFIG_SYS_TSI108_CSR_RST_BASE)
 	/* Relocate (if required) Tsi108 registers. Set new value for
 	 * PB_REG_BAR:
 	 * Note we are in the 32-bit address mode.
 	 */
-	LOAD_U32(r5,(CFG_TSI108_CSR_BASE | 0x01)) /* PB_REG_BAR: BA + EN */
+	LOAD_U32(r5,(CONFIG_SYS_TSI108_CSR_BASE | 0x01)) /* PB_REG_BAR: BA + EN */
 	stw	r5,PB_REG_BAR(r4)
 	andis.	r29,r5,0xFFFF
 	sync
diff --git a/board/freescale/mpc7448hpc2/mpc7448hpc2.c b/board/freescale/mpc7448hpc2/mpc7448hpc2.c
index 6f74c314e..117b951c5 100644
--- a/board/freescale/mpc7448hpc2/mpc7448hpc2.c
+++ b/board/freescale/mpc7448hpc2/mpc7448hpc2.c
@@ -32,6 +32,7 @@
 #include <common.h>
 #include <74xx_7xx.h>
 #include <fdt_support.h>
+#include <netdev.h>
 
 #undef	DEBUG
 
@@ -59,7 +60,7 @@ int checkboard (void)
 {
 	int l_type = 0;
 
-	printf ("BOARD: %s\n", CFG_BOARD_NAME);
+	printf ("BOARD: %s\n", CONFIG_SYS_BOARD_NAME);
 	return (l_type);
 }
 
@@ -92,3 +93,12 @@ ft_board_setup(void *blob, bd_t *bd)
 	fdt_fixup_memory(blob, (u64)bd->bi_memstart, (u64)bd->bi_memsize);
 }
 #endif
+
+int board_eth_init(bd_t *bis)
+{
+	int rc = 0;
+#if defined(CONFIG_TSI108_ETH)
+	rc = tsi108_eth_initialize(bis);
+#endif
+	return rc;
+}
diff --git a/board/freescale/mpc7448hpc2/tsi108_init.c b/board/freescale/mpc7448hpc2/tsi108_init.c
index 9c40b72a1..74bb564ed 100644
--- a/board/freescale/mpc7448hpc2/tsi108_init.c
+++ b/board/freescale/mpc7448hpc2/tsi108_init.c
@@ -88,7 +88,7 @@ PB2OCN_LUT_ENTRY pb2ocn_lut1[32] = {
 	{0x00000000, 0x00000240}  /* PBA=0xFF00_0000 -> HLP : (Translation Enabled + Byte-Swap)*/
 };
 
-#ifdef CFG_CLK_SPREAD
+#ifdef CONFIG_SYS_CLK_SPREAD
 typedef struct {
 	ulong ctrl0;
 	ulong ctrl1;
@@ -111,7 +111,7 @@ static PLL_CTRL_SET pll0_config[8] = {
 	{0x005c0044, 0x00000039},	/* 6: CG_PB_CLKO = 200 MHz */
 	{0x004f0044, 0x0000003e}	/* 7: CG_PB_CLKO = 233 MHz */
 };
-#endif	/* CFG_CLK_SPREAD */
+#endif	/* CONFIG_SYS_CLK_SPREAD */
 
 /*
  * Prosessor Bus Clock (in MHz) defined by CG_PB_SELECT
@@ -129,7 +129,7 @@ unsigned long get_board_bus_clk (void)
 	ulong i;
 
 	/* Detect PB clock freq. */
-	i = in32(CFG_TSI108_CSR_BASE + TSI108_CLK_REG_OFFSET + CG_PWRUP_STATUS);
+	i = in32(CONFIG_SYS_TSI108_CSR_BASE + TSI108_CLK_REG_OFFSET + CG_PWRUP_STATUS);
 	i = (i >> 16) & 0x07;	/* Get PB PLL multiplier */
 
 	return pb_clk_sel[i] * 1000000;
@@ -146,7 +146,7 @@ int board_early_init_f (void)
 	ulong i;
 
 	gd->mem_clk = 0;
-	i = in32 (CFG_TSI108_CSR_BASE + TSI108_CLK_REG_OFFSET +
+	i = in32 (CONFIG_SYS_TSI108_CSR_BASE + TSI108_CLK_REG_OFFSET +
 			CG_PWRUP_STATUS);
 	i = (i >> 20) & 0x07;	/* Get GD PLL multiplier */
 	switch (i) {
@@ -182,7 +182,7 @@ int board_early_init_r (void)
 	volatile ulong *reg_ptr;
 
 	reg_ptr =
-		(ulong *) (CFG_TSI108_CSR_BASE + TSI108_PB_REG_OFFSET + 0x900);
+		(ulong *) (CONFIG_SYS_TSI108_CSR_BASE + TSI108_PB_REG_OFFSET + 0x900);
 
 	for (i = 0; i < 32; i++) {
 		*reg_ptr++ = 0x00000201;	/* SWAP ENABLED */
@@ -194,7 +194,7 @@ int board_early_init_r (void)
 
 	/* Setup PB_OCN_BAR2: size 256B + ENable @ 0x0_80000000 */
 
-	out32 (CFG_TSI108_CSR_BASE + TSI108_PB_REG_OFFSET + PB_OCN_BAR2,
+	out32 (CONFIG_SYS_TSI108_CSR_BASE + TSI108_PB_REG_OFFSET + PB_OCN_BAR2,
 		0x80000001);
 	__asm__ __volatile__ ("sync");
 
@@ -202,7 +202,7 @@ int board_early_init_r (void)
 	 * read from SDRAM)
 	 */
 
-	temp = in32(CFG_TSI108_CSR_BASE + TSI108_PB_REG_OFFSET + PB_OCN_BAR2);
+	temp = in32(CONFIG_SYS_TSI108_CSR_BASE + TSI108_PB_REG_OFFSET + PB_OCN_BAR2);
 	__asm__ __volatile__ ("sync");
 
 	/*
@@ -221,7 +221,7 @@ int board_early_init_r (void)
 	 * initialize pointer to LUT associated with PB_OCN_BAR1
 	 */
 	reg_ptr =
-		(ulong *) (CFG_TSI108_CSR_BASE + TSI108_PB_REG_OFFSET + 0x800);
+		(ulong *) (CONFIG_SYS_TSI108_CSR_BASE + TSI108_PB_REG_OFFSET + 0x800);
 
 	for (i = 0; i < 32; i++) {
 		*reg_ptr++ = pb2ocn_lut1[i].lower;
@@ -232,73 +232,73 @@ int board_early_init_r (void)
 
 	/* Base addresses for CS0, CS1, CS2, CS3 */
 
-	out32 (CFG_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B0_ADDR,
+	out32 (CONFIG_SYS_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B0_ADDR,
 		0x00000000);
 	__asm__ __volatile__ ("sync");
 
-	out32 (CFG_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B1_ADDR,
+	out32 (CONFIG_SYS_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B1_ADDR,
 		0x00100000);
 	__asm__ __volatile__ ("sync");
 
-	out32 (CFG_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B2_ADDR,
+	out32 (CONFIG_SYS_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B2_ADDR,
 		0x00200000);
 	__asm__ __volatile__ ("sync");
 
-	out32 (CFG_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B3_ADDR,
+	out32 (CONFIG_SYS_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B3_ADDR,
 		0x00300000);
 	__asm__ __volatile__ ("sync");
 
 	/* Masks for HLP banks */
 
-	out32 (CFG_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B0_MASK,
+	out32 (CONFIG_SYS_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B0_MASK,
 		0xFFF00000);
 	__asm__ __volatile__ ("sync");
 
-	out32 (CFG_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B1_MASK,
+	out32 (CONFIG_SYS_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B1_MASK,
 		0xFFF00000);
 	__asm__ __volatile__ ("sync");
 
-	out32 (CFG_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B2_MASK,
+	out32 (CONFIG_SYS_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B2_MASK,
 		0xFFF00000);
 	__asm__ __volatile__ ("sync");
 
-	out32 (CFG_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B3_MASK,
+	out32 (CONFIG_SYS_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B3_MASK,
 		0xFFF00000);
 	__asm__ __volatile__ ("sync");
 
 	/* Set CTRL0 values for banks */
 
-	out32 (CFG_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B0_CTRL0,
+	out32 (CONFIG_SYS_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B0_CTRL0,
 		0x7FFC44C2);
 	__asm__ __volatile__ ("sync");
 
-	out32 (CFG_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B1_CTRL0,
+	out32 (CONFIG_SYS_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B1_CTRL0,
 		0x7FFC44C0);
 	__asm__ __volatile__ ("sync");
 
-	out32 (CFG_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B2_CTRL0,
+	out32 (CONFIG_SYS_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B2_CTRL0,
 		0x7FFC44C0);
 	__asm__ __volatile__ ("sync");
 
-	out32 (CFG_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B3_CTRL0,
+	out32 (CONFIG_SYS_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B3_CTRL0,
 		0x7FFC44C2);
 	__asm__ __volatile__ ("sync");
 
 	/* Set banks to latched mode, enabled, and other default settings */
 
-	out32 (CFG_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B0_CTRL1,
+	out32 (CONFIG_SYS_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B0_CTRL1,
 		0x7C0F2000);
 	__asm__ __volatile__ ("sync");
 
-	out32 (CFG_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B1_CTRL1,
+	out32 (CONFIG_SYS_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B1_CTRL1,
 		0x7C0F2000);
 	__asm__ __volatile__ ("sync");
 
-	out32 (CFG_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B2_CTRL1,
+	out32 (CONFIG_SYS_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B2_CTRL1,
 		0x7C0F2000);
 	__asm__ __volatile__ ("sync");
 
-	out32 (CFG_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B3_CTRL1,
+	out32 (CONFIG_SYS_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B3_CTRL1,
 		0x7C0F2000);
 	__asm__ __volatile__ ("sync");
 
@@ -306,7 +306,7 @@ int board_early_init_r (void)
 	 * Set new value for PB_OCN_BAR1: switch from BOOT to LUT mode.
 	 * value for PB_OCN_BAR1: (BA-0xE000_0000 + size 512MB + ENable)
 	 */
-	out32 (CFG_TSI108_CSR_BASE + TSI108_PB_REG_OFFSET + PB_OCN_BAR1,
+	out32 (CONFIG_SYS_TSI108_CSR_BASE + TSI108_PB_REG_OFFSET + PB_OCN_BAR1,
 		0xE0000011);
 	__asm__ __volatile__ ("sync");
 
@@ -314,7 +314,7 @@ int board_early_init_r (void)
 	 * immediate read from SDRAM)
 	 */
 
-	temp = in32(CFG_TSI108_CSR_BASE + TSI108_PB_REG_OFFSET + PB_OCN_BAR1);
+	temp = in32(CONFIG_SYS_TSI108_CSR_BASE + TSI108_PB_REG_OFFSET + PB_OCN_BAR1);
 	__asm__ __volatile__ ("sync");
 
 	/*
@@ -341,7 +341,7 @@ int board_early_init_r (void)
 	temp = get_cpu_type ();
 
 	if ((CPU_750FX == temp) || (CPU_750GX == temp))
-		out32 (CFG_TSI108_CSR_BASE + TSI108_PB_REG_OFFSET + PB_MCMD,
+		out32 (CONFIG_SYS_TSI108_CSR_BASE + TSI108_PB_REG_OFFSET + PB_MCMD,
 			0x00009955);
 #endif	/* DISABLE_PBM */
 
@@ -351,27 +351,27 @@ int board_early_init_r (void)
 	 */
 
 	/* Map PCI/X Configuration Space (16MB @ 0x0_FE000000) */
-	out32 (CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET +
+	out32 (CONFIG_SYS_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET +
 		PCI_PFAB_BAR0_UPPER, 0);
 	__asm__ __volatile__ ("sync");
 
-	out32 (CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_PFAB_BAR0,
+	out32 (CONFIG_SYS_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_PFAB_BAR0,
 		0xFB000001);
 	__asm__ __volatile__ ("sync");
 
 	/* Set Bus Number for the attached PCI/X bus (we will use 0 for NB) */
 
-	temp =	in32(CFG_TSI108_CSR_BASE +
+	temp =	in32(CONFIG_SYS_TSI108_CSR_BASE +
 		TSI108_PCI_REG_OFFSET + PCI_PCIX_STAT);
 
 	temp &= ~0xFF00;	/* Clear the BUS_NUM field */
 
-	out32 (CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_PCIX_STAT,
+	out32 (CONFIG_SYS_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_PCIX_STAT,
 		temp);
 
 	/* Map PCI/X IO Space (64KB @ 0x0_FD000000) takes one 16MB LUT entry */
 
-	out32 (CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_PFAB_IO_UPPER,
+	out32 (CONFIG_SYS_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_PFAB_IO_UPPER,
 		0);
 	__asm__ __volatile__ ("sync");
 
@@ -379,7 +379,7 @@ int board_early_init_r (void)
 	 * and maps it as a IO address.
 	 */
 
-	out32 (CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_PFAB_IO,
+	out32 (CONFIG_SYS_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_PFAB_IO,
 		0x00000001);
 	__asm__ __volatile__ ("sync");
 
@@ -405,7 +405,7 @@ int board_early_init_r (void)
 	 */
 
 	reg_ptr =
-		(ulong *) (CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + 0x500);
+		(ulong *) (CONFIG_SYS_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + 0x500);
 
 #ifdef DISABLE_PBM
 
@@ -442,7 +442,7 @@ int board_early_init_r (void)
 	__asm__ __volatile__ ("eieio");
 	__asm__ __volatile__ ("sync");
 
-	out32 (CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_P2O_PAGE_SIZES,
+	out32 (CONFIG_SYS_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_P2O_PAGE_SIZES,
 		reg_val);
 	__asm__ __volatile__ ("sync");
 
@@ -450,9 +450,9 @@ int board_early_init_r (void)
 	 * ( 0 is the best choice for easy mapping)
 	 */
 
-	out32 (CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_P2O_BAR2,
+	out32 (CONFIG_SYS_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_P2O_BAR2,
 		0x00000000);
-	out32 (CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_P2O_BAR2_UPPER,
+	out32 (CONFIG_SYS_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_P2O_BAR2_UPPER,
 		0x00000000);
 	__asm__ __volatile__ ("sync");
 
@@ -470,7 +470,7 @@ int board_early_init_r (void)
 	 *  set pointer to LUT associated with PCI P2O_BAR3
 	 */
 	reg_ptr =
-		(ulong *) (CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + 0x600);
+		(ulong *) (CONFIG_SYS_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + 0x600);
 
 	reg_val = 0x00000004;	/* Destination port = SDC */
 
@@ -490,19 +490,19 @@ int board_early_init_r (void)
 	/* Configure PCI P2O_BAR3 (size = 512MB, Enabled) */
 
 	reg_val =
-		in32(CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET +
+		in32(CONFIG_SYS_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET +
 		 PCI_P2O_PAGE_SIZES);
 	reg_val &= ~0x00FF;
 	reg_val |= 0x0071;
-	out32 (CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_P2O_PAGE_SIZES,
+	out32 (CONFIG_SYS_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_P2O_PAGE_SIZES,
 		reg_val);
 	__asm__ __volatile__ ("sync");
 
 	/* Set 64-bit base PCI bus address for window (0x20000000) */
 
-	out32 (CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_P2O_BAR3_UPPER,
+	out32 (CONFIG_SYS_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_P2O_BAR3_UPPER,
 		0x00000000);
-	out32 (CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_P2O_BAR3,
+	out32 (CONFIG_SYS_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_P2O_BAR3,
 		0x20000000);
 	__asm__ __volatile__ ("sync");
 
@@ -511,17 +511,17 @@ int board_early_init_r (void)
 #ifdef ENABLE_PCI_CSR_BAR
 	/* open if required access to Tsi108 CSRs from the PCI/X bus */
 	/* enable BAR0 on the PCI/X bus */
-	reg_val = in32(CFG_TSI108_CSR_BASE +
+	reg_val = in32(CONFIG_SYS_TSI108_CSR_BASE +
 		TSI108_PCI_REG_OFFSET + PCI_MISC_CSR);
 	reg_val |= 0x02;
-	out32 (CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_MISC_CSR,
+	out32 (CONFIG_SYS_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_MISC_CSR,
 		reg_val);
 	__asm__ __volatile__ ("sync");
 
-	out32 (CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_P2O_BAR0_UPPER,
+	out32 (CONFIG_SYS_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_P2O_BAR0_UPPER,
 		0x00000000);
-	out32 (CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_P2O_BAR0,
-		CFG_TSI108_CSR_BASE);
+	out32 (CONFIG_SYS_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_P2O_BAR0,
+		CONFIG_SYS_TSI108_CSR_BASE);
 	__asm__ __volatile__ ("sync");
 
 #endif
@@ -530,9 +530,9 @@ int board_early_init_r (void)
 	 * Finally enable PCI/X Bus Master and Memory Space access
 	 */
 
-	reg_val = in32(CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_CSR);
+	reg_val = in32(CONFIG_SYS_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_CSR);
 	reg_val |= 0x06;
-	out32 (CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_CSR, reg_val);
+	out32 (CONFIG_SYS_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_CSR, reg_val);
 	__asm__ __volatile__ ("sync");
 
 #endif	/* CONFIG_PCI */
@@ -546,10 +546,10 @@ int board_early_init_r (void)
 	 * PB_INT[3] -> MCP (CPU1)
 	 * Set interrupt controller outputs as Level_Sensitive/Active_Low
 	 */
-	out32 (CFG_TSI108_CSR_BASE + TSI108_MPIC_REG_OFFSET + MPIC_CSR(0), 0x02);
-	out32 (CFG_TSI108_CSR_BASE + TSI108_MPIC_REG_OFFSET + MPIC_CSR(1), 0x02);
-	out32 (CFG_TSI108_CSR_BASE + TSI108_MPIC_REG_OFFSET + MPIC_CSR(2), 0x02);
-	out32 (CFG_TSI108_CSR_BASE + TSI108_MPIC_REG_OFFSET + MPIC_CSR(3), 0x02);
+	out32 (CONFIG_SYS_TSI108_CSR_BASE + TSI108_MPIC_REG_OFFSET + MPIC_CSR(0), 0x02);
+	out32 (CONFIG_SYS_TSI108_CSR_BASE + TSI108_MPIC_REG_OFFSET + MPIC_CSR(1), 0x02);
+	out32 (CONFIG_SYS_TSI108_CSR_BASE + TSI108_MPIC_REG_OFFSET + MPIC_CSR(2), 0x02);
+	out32 (CONFIG_SYS_TSI108_CSR_BASE + TSI108_MPIC_REG_OFFSET + MPIC_CSR(3), 0x02);
 	__asm__ __volatile__ ("sync");
 
 	/*
@@ -584,42 +584,42 @@ unsigned long get_l2cr (void)
 
 int misc_init_r (void)
 {
-#ifdef CFG_CLK_SPREAD	/* Initialize Spread-Spectrum Clock generation */
+#ifdef CONFIG_SYS_CLK_SPREAD	/* Initialize Spread-Spectrum Clock generation */
 	ulong i;
 
 	/* Ensure that Spread-Spectrum is disabled */
-	out32 (CFG_TSI108_CSR_BASE + TSI108_CLK_REG_OFFSET + CG_PLL0_CTRL0, 0);
-	out32 (CFG_TSI108_CSR_BASE + TSI108_CLK_REG_OFFSET + CG_PLL1_CTRL0, 0);
+	out32 (CONFIG_SYS_TSI108_CSR_BASE + TSI108_CLK_REG_OFFSET + CG_PLL0_CTRL0, 0);
+	out32 (CONFIG_SYS_TSI108_CSR_BASE + TSI108_CLK_REG_OFFSET + CG_PLL1_CTRL0, 0);
 
 	/* Initialize PLL1: CG_PCI_CLK , internal OCN_CLK
 	 * Uses pre-calculated value for Fout = 800 MHz, Fs = 30 kHz, D = 0.5%
 	 */
 
-	out32 (CFG_TSI108_CSR_BASE + TSI108_CLK_REG_OFFSET + CG_PLL1_CTRL0,
+	out32 (CONFIG_SYS_TSI108_CSR_BASE + TSI108_CLK_REG_OFFSET + CG_PLL1_CTRL0,
 		0x002e0044);	/* D = 0.25% */
-	out32 (CFG_TSI108_CSR_BASE + TSI108_CLK_REG_OFFSET + CG_PLL1_CTRL1,
+	out32 (CONFIG_SYS_TSI108_CSR_BASE + TSI108_CLK_REG_OFFSET + CG_PLL1_CTRL1,
 		0x00000039);	/* BWADJ */
 
 	/* Initialize PLL0: CG_PB_CLKO  */
 	/* Detect PB clock freq. */
-	i = in32(CFG_TSI108_CSR_BASE + TSI108_CLK_REG_OFFSET + CG_PWRUP_STATUS);
+	i = in32(CONFIG_SYS_TSI108_CSR_BASE + TSI108_CLK_REG_OFFSET + CG_PWRUP_STATUS);
 	i = (i >> 16) & 0x07;	/* Get PB PLL multiplier */
 
-	out32 (CFG_TSI108_CSR_BASE +
+	out32 (CONFIG_SYS_TSI108_CSR_BASE +
 		TSI108_CLK_REG_OFFSET + CG_PLL0_CTRL0, pll0_config[i].ctrl0);
-	out32 (CFG_TSI108_CSR_BASE +
+	out32 (CONFIG_SYS_TSI108_CSR_BASE +
 		TSI108_CLK_REG_OFFSET + CG_PLL0_CTRL1, pll0_config[i].ctrl1);
 
 	/* Wait and set SSEN for both PLL0 and 1 */
 	udelay (1000);
-	out32 (CFG_TSI108_CSR_BASE + TSI108_CLK_REG_OFFSET + CG_PLL1_CTRL0,
+	out32 (CONFIG_SYS_TSI108_CSR_BASE + TSI108_CLK_REG_OFFSET + CG_PLL1_CTRL0,
 		0x802e0044);	/* D=0.25% */
-	out32 (CFG_TSI108_CSR_BASE +
+	out32 (CONFIG_SYS_TSI108_CSR_BASE +
 		TSI108_CLK_REG_OFFSET + CG_PLL0_CTRL0,
 		0x80000000 | pll0_config[i].ctrl0);
-#endif	/* CFG_CLK_SPREAD */
+#endif	/* CONFIG_SYS_CLK_SPREAD */
 
-#ifdef CFG_L2
+#ifdef CONFIG_SYS_L2
 	l2cache_enable ();
 #endif
 	printf ("BUS:   %lu MHz\n", gd->bus_clk / 1000000);
diff --git a/board/freescale/mpc7448hpc2/u-boot.lds b/board/freescale/mpc7448hpc2/u-boot.lds
index 6b228f7a9..f3f6c544d 100644
--- a/board/freescale/mpc7448hpc2/u-boot.lds
+++ b/board/freescale/mpc7448hpc2/u-boot.lds
@@ -60,7 +60,7 @@ SECTIONS
 
 /* store the environment in a seperate sector in the boot flash */
 /*    . = env_offset; */
-/*    common/environment.o(.text) */
+/*    common/env_embedded.o(.text) */
 
     *(.text)
     *(.fixup)
@@ -129,6 +129,7 @@ SECTIONS
    *(.dynbss)
    *(.bss)
    *(COMMON)
+   . = ALIGN(4);
   }
   _end = . ;
   PROVIDE (end = .);
diff --git a/board/freescale/mpc8260ads/flash.c b/board/freescale/mpc8260ads/flash.c
index 59997aac4..e03852f68 100644
--- a/board/freescale/mpc8260ads/flash.c
+++ b/board/freescale/mpc8260ads/flash.c
@@ -52,7 +52,7 @@
 #define INTEL_FINISHED 0x80808080
 #define INTEL_OK       0x80808080
 
-flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
+flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */
 
 /*-----------------------------------------------------------------------
  * This board supports 32-bit wide flash SIMMs (4x8-bit configuration.)
@@ -66,8 +66,8 @@ unsigned long flash_init (void)
 	ulong size = 0, sect_start, sect_size = 0, bank_size;
 	ushort sect_count = 0;
 	int i, j, nbanks;
-	vu_long *addr = (vu_long *)CFG_FLASH_BASE;
-	vu_long *bcsr = (vu_long *)CFG_BCSR;
+	vu_long *addr = (vu_long *)CONFIG_SYS_FLASH_BASE;
+	vu_long *bcsr = (vu_long *)CONFIG_SYS_BCSR;
 
 	switch (bcsr[2] & 0xF) {
 	case 0:
@@ -80,11 +80,11 @@ unsigned long flash_init (void)
 		nbanks = 1;
 		break;
 	default:		/* Unsupported configurations */
-		nbanks = CFG_MAX_FLASH_BANKS;
+		nbanks = CONFIG_SYS_MAX_FLASH_BANKS;
 	}
 
-	if (nbanks > CFG_MAX_FLASH_BANKS)
-		nbanks = CFG_MAX_FLASH_BANKS;
+	if (nbanks > CONFIG_SYS_MAX_FLASH_BANKS)
+		nbanks = CONFIG_SYS_MAX_FLASH_BANKS;
 
 	for (i = 0; i < nbanks; i++) {
 		*addr = INTEL_READID;	/* Read Intelligent Identifier */
@@ -98,9 +98,9 @@ unsigned long flash_init (void)
 				break;
 			default:
 				flash_info[i].flash_id = FLASH_UNKNOWN;
-				sect_count = CFG_MAX_FLASH_SECT;
+				sect_count = CONFIG_SYS_MAX_FLASH_SECT;
 				sect_size =
-				   CFG_FLASH_SIZE / CFG_MAX_FLASH_BANKS / CFG_MAX_FLASH_SECT;
+				   CONFIG_SYS_FLASH_SIZE / CONFIG_SYS_MAX_FLASH_BANKS / CONFIG_SYS_MAX_FLASH_SECT;
 			}
 		}
 		else
@@ -127,10 +127,10 @@ unsigned long flash_init (void)
 	}
 
 	if (size == 0) {	/* Unknown flash, fill with hard-coded values */
-		sect_start = CFG_FLASH_BASE;
-		for (i = 0; i < CFG_MAX_FLASH_BANKS; i++) {
+		sect_start = CONFIG_SYS_FLASH_BASE;
+		for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) {
 			flash_info[i].flash_id = FLASH_UNKNOWN;
-			flash_info[i].size = CFG_FLASH_SIZE / CFG_MAX_FLASH_BANKS;
+			flash_info[i].size = CONFIG_SYS_FLASH_SIZE / CONFIG_SYS_MAX_FLASH_BANKS;
 			flash_info[i].sector_count = sect_count;
 			for (j = 0; j < sect_count; j++) {
 				flash_info[i].start[j]   = sect_start;
@@ -138,28 +138,28 @@ unsigned long flash_init (void)
 				sect_start += sect_size;
 			}
 		}
-		size = CFG_FLASH_SIZE;
+		size = CONFIG_SYS_FLASH_SIZE;
 	}
 	else
-		for (i = nbanks; i < CFG_MAX_FLASH_BANKS; i++) {
+		for (i = nbanks; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) {
 			flash_info[i].flash_id = FLASH_UNKNOWN;
 			flash_info[i].size = 0;
 			flash_info[i].sector_count = 0;
 		}
 
-#if CFG_MONITOR_BASE >= CFG_FLASH_BASE
+#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE
 	/* monitor protection ON by default */
 	flash_protect(FLAG_PROTECT_SET,
-		      CFG_MONITOR_BASE,
-		      CFG_MONITOR_BASE+monitor_flash_len-1,
+		      CONFIG_SYS_MONITOR_BASE,
+		      CONFIG_SYS_MONITOR_BASE+monitor_flash_len-1,
 		      &flash_info[0]);
 #endif
 
-#ifdef	CFG_ENV_IS_IN_FLASH
+#ifdef	CONFIG_ENV_IS_IN_FLASH
 	/* ENV protection ON by default */
 	flash_protect(FLAG_PROTECT_SET,
-		      CFG_ENV_ADDR,
-		      CFG_ENV_ADDR+CFG_ENV_SECT_SIZE-1,
+		      CONFIG_ENV_ADDR,
+		      CONFIG_ENV_ADDR+CONFIG_ENV_SECT_SIZE-1,
 		      &flash_info[0]);
 #endif
 	return (size);
@@ -274,7 +274,7 @@ int	flash_erase (flash_info_t *info, int s_first, int s_last)
 				enable_interrupts();
 
 			while ((*addr & INTEL_FINISHED) != INTEL_FINISHED) {
-				if ((now=get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+				if ((now=get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
 					printf ("Timeout\n");
 					*addr = INTEL_RESET;	/* reset bank */
 					return 1;
@@ -338,7 +338,7 @@ static int write_word (flash_info_t *info, ulong dest, ulong data)
 	/* data polling for D7 */
 	start = get_timer (0);
 	while ((*addr & INTEL_FINISHED) != INTEL_FINISHED) {
-		if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+		if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
 			printf("Write timed out\n");
 			rc = 1;
 			break;
@@ -454,7 +454,7 @@ int flash_real_protect(flash_info_t *info, long sector, int prot)
 
 	start = get_timer(0);
 	while ((*addr & INTEL_FINISHED) != INTEL_FINISHED) {
-		if (get_timer(start) > CFG_FLASH_UNLOCK_TOUT) {
+		if (get_timer(start) > CONFIG_SYS_FLASH_UNLOCK_TOUT) {
 			printf("Flash lock bit operation timed out\n");
 			rc = 1;
 			break;
@@ -480,7 +480,7 @@ int flash_real_protect(flash_info_t *info, long sector, int prot)
 				addr = (vu_long *)(info->start[i]);
 				*addr = INTEL_LOCKBIT;	/* Sector lock bit */
 				*addr = INTEL_PROTECT;	/* set */
-				udelay(CFG_FLASH_LOCK_TOUT * 1000);
+				udelay(CONFIG_SYS_FLASH_LOCK_TOUT * 1000);
 			}
 
 	if (flag)
diff --git a/board/freescale/mpc8260ads/mpc8260ads.c b/board/freescale/mpc8260ads/mpc8260ads.c
index 8ab7d356c..49a88bbdd 100644
--- a/board/freescale/mpc8260ads/mpc8260ads.c
+++ b/board/freescale/mpc8260ads/mpc8260ads.c
@@ -58,32 +58,32 @@
  * according to the five values podr/pdir/ppar/psor/pdat for that entry
  */
 
-#define CFG_FCC1 (CONFIG_ETHER_INDEX == 1)
-#define CFG_FCC2 (CONFIG_ETHER_INDEX == 2)
-#define CFG_FCC3 (CONFIG_ETHER_INDEX == 3)
+#define CONFIG_SYS_FCC1 (CONFIG_ETHER_INDEX == 1)
+#define CONFIG_SYS_FCC2 (CONFIG_ETHER_INDEX == 2)
+#define CONFIG_SYS_FCC3 (CONFIG_ETHER_INDEX == 3)
 
 const iop_conf_t iop_conf_tab[4][32] = {
 
     /* Port A configuration */
     {	/*	      conf      ppar psor pdir podr pdat */
-	/* PA31 */ { CFG_FCC1,   1,   1,   0,   0,   0 }, /* FCC1 MII COL   */
-	/* PA30 */ { CFG_FCC1,   1,   1,   0,   0,   0 }, /* FCC1 MII CRS   */
-	/* PA29 */ { CFG_FCC1,   1,   1,   1,   0,   0 }, /* FCC1 MII TX_ER */
-	/* PA28 */ { CFG_FCC1,   1,   1,   1,   0,   0 }, /* FCC1 MII TX_EN */
-	/* PA27 */ { CFG_FCC1,   1,   1,   0,   0,   0 }, /* FCC1 MII RX_DV */
-	/* PA26 */ { CFG_FCC1,   1,   1,   0,   0,   0 }, /* FCC1 MII RX_ER */
+	/* PA31 */ { CONFIG_SYS_FCC1,   1,   1,   0,   0,   0 }, /* FCC1 MII COL   */
+	/* PA30 */ { CONFIG_SYS_FCC1,   1,   1,   0,   0,   0 }, /* FCC1 MII CRS   */
+	/* PA29 */ { CONFIG_SYS_FCC1,   1,   1,   1,   0,   0 }, /* FCC1 MII TX_ER */
+	/* PA28 */ { CONFIG_SYS_FCC1,   1,   1,   1,   0,   0 }, /* FCC1 MII TX_EN */
+	/* PA27 */ { CONFIG_SYS_FCC1,   1,   1,   0,   0,   0 }, /* FCC1 MII RX_DV */
+	/* PA26 */ { CONFIG_SYS_FCC1,   1,   1,   0,   0,   0 }, /* FCC1 MII RX_ER */
 	/* PA25 */ { 0,          0,   0,   0,   0,   0 }, /* PA25 */
 	/* PA24 */ { 0,          0,   0,   0,   0,   0 }, /* PA24 */
 	/* PA23 */ { 0,          0,   0,   0,   0,   0 }, /* PA23 */
 	/* PA22 */ { 0,          0,   0,   0,   0,   0 }, /* PA22 */
-	/* PA21 */ { CFG_FCC1,   1,   0,   1,   0,   0 }, /* FCC1 MII TxD[3] */
-	/* PA20 */ { CFG_FCC1,   1,   0,   1,   0,   0 }, /* FCC1 MII TxD[2] */
-	/* PA19 */ { CFG_FCC1,   1,   0,   1,   0,   0 }, /* FCC1 MII TxD[1] */
-	/* PA18 */ { CFG_FCC1,   1,   0,   1,   0,   0 }, /* FCC1 MII TxD[0] */
-	/* PA17 */ { CFG_FCC1,   1,   0,   0,   0,   0 }, /* FCC1 MII RxD[0] */
-	/* PA16 */ { CFG_FCC1,   1,   0,   0,   0,   0 }, /* FCC1 MII RxD[1] */
-	/* PA15 */ { CFG_FCC1,   1,   0,   0,   0,   0 }, /* FCC1 MII RxD[2] */
-	/* PA14 */ { CFG_FCC1,   1,   0,   0,   0,   0 }, /* FCC1 MII RxD[3] */
+	/* PA21 */ { CONFIG_SYS_FCC1,   1,   0,   1,   0,   0 }, /* FCC1 MII TxD[3] */
+	/* PA20 */ { CONFIG_SYS_FCC1,   1,   0,   1,   0,   0 }, /* FCC1 MII TxD[2] */
+	/* PA19 */ { CONFIG_SYS_FCC1,   1,   0,   1,   0,   0 }, /* FCC1 MII TxD[1] */
+	/* PA18 */ { CONFIG_SYS_FCC1,   1,   0,   1,   0,   0 }, /* FCC1 MII TxD[0] */
+	/* PA17 */ { CONFIG_SYS_FCC1,   1,   0,   0,   0,   0 }, /* FCC1 MII RxD[0] */
+	/* PA16 */ { CONFIG_SYS_FCC1,   1,   0,   0,   0,   0 }, /* FCC1 MII RxD[1] */
+	/* PA15 */ { CONFIG_SYS_FCC1,   1,   0,   0,   0,   0 }, /* FCC1 MII RxD[2] */
+	/* PA14 */ { CONFIG_SYS_FCC1,   1,   0,   0,   0,   0 }, /* FCC1 MII RxD[3] */
 	/* PA13 */ { 0,          0,   0,   0,   0,   0 }, /* PA13 */
 	/* PA12 */ { 0,          0,   0,   0,   0,   0 }, /* PA12 */
 	/* PA11 */ { 0,          0,   0,   0,   0,   0 }, /* PA11 */
@@ -102,34 +102,34 @@ const iop_conf_t iop_conf_tab[4][32] = {
 
     /* Port B configuration */
     {   /*	      conf      ppar psor pdir podr pdat */
-	/* PB31 */ { CFG_FCC2,   1,   0,   1,   0,   0 }, /* FCC2 MII TX_ER */
-	/* PB30 */ { CFG_FCC2,   1,   0,   0,   0,   0 }, /* FCC2 MII RX_DV */
-	/* PB29 */ { CFG_FCC2,   1,   1,   1,   0,   0 }, /* FCC2 MII TX_EN */
-	/* PB28 */ { CFG_FCC2,   1,   0,   0,   0,   0 }, /* FCC2 MII RX_ER */
-	/* PB27 */ { CFG_FCC2,   1,   0,   0,   0,   0 }, /* FCC2 MII COL */
-	/* PB26 */ { CFG_FCC2,   1,   0,   0,   0,   0 }, /* FCC2 MII CRS */
-	/* PB25 */ { CFG_FCC2,   1,   0,   1,   0,   0 }, /* FCC2 MII TxD[3] */
-	/* PB24 */ { CFG_FCC2,   1,   0,   1,   0,   0 }, /* FCC2 MII TxD[2] */
-	/* PB23 */ { CFG_FCC2,   1,   0,   1,   0,   0 }, /* FCC2 MII TxD[1] */
-	/* PB22 */ { CFG_FCC2,   1,   0,   1,   0,   0 }, /* FCC2 MII TxD[0] */
-	/* PB21 */ { CFG_FCC2,   1,   0,   0,   0,   0 }, /* FCC2 MII RxD[0] */
-	/* PB20 */ { CFG_FCC2,   1,   0,   0,   0,   0 }, /* FCC2 MII RxD[1] */
-	/* PB19 */ { CFG_FCC2,   1,   0,   0,   0,   0 }, /* FCC2 MII RxD[2] */
-	/* PB18 */ { CFG_FCC2,   1,   0,   0,   0,   0 }, /* FCC2 MII RxD[3] */
-	/* PB17 */ { CFG_FCC3,   1,   0,   0,   0,   0 }, /* FCC3:RX_DIV */
-	/* PB16 */ { CFG_FCC3,   1,   0,   0,   0,   0 }, /* FCC3:RX_ERR */
-	/* PB15 */ { CFG_FCC3,   1,   0,   1,   0,   0 }, /* FCC3:TX_ERR */
-	/* PB14 */ { CFG_FCC3,   1,   0,   1,   0,   0 }, /* FCC3:TX_EN */
-	/* PB13 */ { CFG_FCC3,   1,   0,   0,   0,   0 }, /* FCC3:COL */
-	/* PB12 */ { CFG_FCC3,   1,   0,   0,   0,   0 }, /* FCC3:CRS */
-	/* PB11 */ { CFG_FCC3,   1,   0,   0,   0,   0 }, /* FCC3:RXD */
-	/* PB10 */ { CFG_FCC3,   1,   0,   0,   0,   0 }, /* FCC3:RXD */
-	/* PB9  */ { CFG_FCC3,   1,   0,   0,   0,   0 }, /* FCC3:RXD */
-	/* PB8  */ { CFG_FCC3,   1,   0,   0,   0,   0 }, /* FCC3:RXD */
-	/* PB7  */ { CFG_FCC3,   1,   0,   1,   0,   0 }, /* FCC3:TXD */
-	/* PB6  */ { CFG_FCC3,   1,   0,   1,   0,   0 }, /* FCC3:TXD */
-	/* PB5  */ { CFG_FCC3,   1,   0,   1,   0,   0 }, /* FCC3:TXD */
-	/* PB4  */ { CFG_FCC3,   1,   0,   1,   0,   0 }, /* FCC3:TXD */
+	/* PB31 */ { CONFIG_SYS_FCC2,   1,   0,   1,   0,   0 }, /* FCC2 MII TX_ER */
+	/* PB30 */ { CONFIG_SYS_FCC2,   1,   0,   0,   0,   0 }, /* FCC2 MII RX_DV */
+	/* PB29 */ { CONFIG_SYS_FCC2,   1,   1,   1,   0,   0 }, /* FCC2 MII TX_EN */
+	/* PB28 */ { CONFIG_SYS_FCC2,   1,   0,   0,   0,   0 }, /* FCC2 MII RX_ER */
+	/* PB27 */ { CONFIG_SYS_FCC2,   1,   0,   0,   0,   0 }, /* FCC2 MII COL */
+	/* PB26 */ { CONFIG_SYS_FCC2,   1,   0,   0,   0,   0 }, /* FCC2 MII CRS */
+	/* PB25 */ { CONFIG_SYS_FCC2,   1,   0,   1,   0,   0 }, /* FCC2 MII TxD[3] */
+	/* PB24 */ { CONFIG_SYS_FCC2,   1,   0,   1,   0,   0 }, /* FCC2 MII TxD[2] */
+	/* PB23 */ { CONFIG_SYS_FCC2,   1,   0,   1,   0,   0 }, /* FCC2 MII TxD[1] */
+	/* PB22 */ { CONFIG_SYS_FCC2,   1,   0,   1,   0,   0 }, /* FCC2 MII TxD[0] */
+	/* PB21 */ { CONFIG_SYS_FCC2,   1,   0,   0,   0,   0 }, /* FCC2 MII RxD[0] */
+	/* PB20 */ { CONFIG_SYS_FCC2,   1,   0,   0,   0,   0 }, /* FCC2 MII RxD[1] */
+	/* PB19 */ { CONFIG_SYS_FCC2,   1,   0,   0,   0,   0 }, /* FCC2 MII RxD[2] */
+	/* PB18 */ { CONFIG_SYS_FCC2,   1,   0,   0,   0,   0 }, /* FCC2 MII RxD[3] */
+	/* PB17 */ { CONFIG_SYS_FCC3,   1,   0,   0,   0,   0 }, /* FCC3:RX_DIV */
+	/* PB16 */ { CONFIG_SYS_FCC3,   1,   0,   0,   0,   0 }, /* FCC3:RX_ERR */
+	/* PB15 */ { CONFIG_SYS_FCC3,   1,   0,   1,   0,   0 }, /* FCC3:TX_ERR */
+	/* PB14 */ { CONFIG_SYS_FCC3,   1,   0,   1,   0,   0 }, /* FCC3:TX_EN */
+	/* PB13 */ { CONFIG_SYS_FCC3,   1,   0,   0,   0,   0 }, /* FCC3:COL */
+	/* PB12 */ { CONFIG_SYS_FCC3,   1,   0,   0,   0,   0 }, /* FCC3:CRS */
+	/* PB11 */ { CONFIG_SYS_FCC3,   1,   0,   0,   0,   0 }, /* FCC3:RXD */
+	/* PB10 */ { CONFIG_SYS_FCC3,   1,   0,   0,   0,   0 }, /* FCC3:RXD */
+	/* PB9  */ { CONFIG_SYS_FCC3,   1,   0,   0,   0,   0 }, /* FCC3:RXD */
+	/* PB8  */ { CONFIG_SYS_FCC3,   1,   0,   0,   0,   0 }, /* FCC3:RXD */
+	/* PB7  */ { CONFIG_SYS_FCC3,   1,   0,   1,   0,   0 }, /* FCC3:TXD */
+	/* PB6  */ { CONFIG_SYS_FCC3,   1,   0,   1,   0,   0 }, /* FCC3:TXD */
+	/* PB5  */ { CONFIG_SYS_FCC3,   1,   0,   1,   0,   0 }, /* FCC3:TXD */
+	/* PB4  */ { CONFIG_SYS_FCC3,   1,   0,   1,   0,   0 }, /* FCC3:TXD */
 	/* PB3  */ { 0,          0,   0,   0,   0,   0 }, /* pin doesn't exist */
 	/* PB2  */ { 0,          0,   0,   0,   0,   0 }, /* pin doesn't exist */
 	/* PB1  */ { 0,          0,   0,   0,   0,   0 }, /* pin doesn't exist */
@@ -147,32 +147,32 @@ const iop_conf_t iop_conf_tab[4][32] = {
 	/* PC25 */ { 0,          0,   0,   0,   0,   0 }, /* PC25 */
 	/* PC24 */ { 0,          0,   0,   0,   0,   0 }, /* PC24 */
 	/* PC23 */ { 0,          0,   0,   0,   0,   0 }, /* PC23 */
-	/* PC22 */ { CFG_FCC1,   1,   0,   0,   0,   0 }, /* FCC1 MII Tx Clock (CLK10) */
-	/* PC21 */ { CFG_FCC1,   1,   0,   0,   0,   0 }, /* FCC1 MII Rx Clock (CLK11) */
+	/* PC22 */ { CONFIG_SYS_FCC1,   1,   0,   0,   0,   0 }, /* FCC1 MII Tx Clock (CLK10) */
+	/* PC21 */ { CONFIG_SYS_FCC1,   1,   0,   0,   0,   0 }, /* FCC1 MII Rx Clock (CLK11) */
 	/* PC20 */ { 0,          0,   0,   0,   0,   0 }, /* PC20 */
-#if CONFIG_ADSTYPE == CFG_8272ADS
+#if CONFIG_ADSTYPE == CONFIG_SYS_8272ADS
 	/* PC19 */ { 1,          0,   0,   1,   0,   0 }, /* FETHMDC  */
 	/* PC18 */ { 1,          0,   0,   0,   0,   0 }, /* FETHMDIO */
-	/* PC17 */ { CFG_FCC2,   1,   0,   0,   0,   0 }, /* FCC2 MII Rx Clock (CLK15) */
-	/* PC16 */ { CFG_FCC2,   1,   0,   0,   0,   0 }, /* FCC2 MII Tx Clock (CLK16) */
+	/* PC17 */ { CONFIG_SYS_FCC2,   1,   0,   0,   0,   0 }, /* FCC2 MII Rx Clock (CLK15) */
+	/* PC16 */ { CONFIG_SYS_FCC2,   1,   0,   0,   0,   0 }, /* FCC2 MII Tx Clock (CLK16) */
 #else
-	/* PC19 */ { CFG_FCC2,   1,   0,   0,   0,   0 }, /* FCC2 MII Rx Clock (CLK13) */
-	/* PC18 */ { CFG_FCC2,   1,   0,   0,   0,   0 }, /* FCC2 MII Tx Clock (CLK14) */
+	/* PC19 */ { CONFIG_SYS_FCC2,   1,   0,   0,   0,   0 }, /* FCC2 MII Rx Clock (CLK13) */
+	/* PC18 */ { CONFIG_SYS_FCC2,   1,   0,   0,   0,   0 }, /* FCC2 MII Tx Clock (CLK14) */
 	/* PC17 */ { 0,          0,   0,   0,   0,   0 }, /* PC17 */
 	/* PC16 */ { 0,          0,   0,   0,   0,   0 }, /* PC16 */
-#endif /* CONFIG_ADSTYPE == CFG_8272ADS */
+#endif /* CONFIG_ADSTYPE == CONFIG_SYS_8272ADS */
 	/* PC15 */ { 0,          0,   0,   0,   0,   0 }, /* PC15 */
 	/* PC14 */ { 0,          0,   0,   0,   0,   0 }, /* PC14 */
 	/* PC13 */ { 0,          0,   0,   0,   0,   0 }, /* PC13 */
 	/* PC12 */ { 0,          0,   0,   0,   0,   0 }, /* PC12 */
 	/* PC11 */ { 0,          0,   0,   0,   0,   0 }, /* PC11 */
-#if CONFIG_ADSTYPE == CFG_8272ADS
+#if CONFIG_ADSTYPE == CONFIG_SYS_8272ADS
 	/* PC10 */ { 0,          0,   0,   0,   0,   0 }, /* PC10 */
 	/* PC9  */ { 0,          0,   0,   0,   0,   0 }, /* PC9  */
 #else
 	/* PC10 */ { 1,          0,   0,   1,   0,   0 }, /* FETHMDC  */
 	/* PC9  */ { 1,          0,   0,   0,   0,   0 }, /* FETHMDIO */
-#endif /* CONFIG_ADSTYPE == CFG_8272ADS */
+#endif /* CONFIG_ADSTYPE == CONFIG_SYS_8272ADS */
 	/* PC8  */ { 0,          0,   0,   0,   0,   0 }, /* PC8 */
 	/* PC7  */ { 0,          0,   0,   0,   0,   0 }, /* PC7 */
 	/* PC6  */ { 0,          0,   0,   0,   0,   0 }, /* PC6 */
@@ -223,10 +223,10 @@ const iop_conf_t iop_conf_tab[4][32] = {
 
 void reset_phy (void)
 {
-	vu_long *bcsr = (vu_long *)CFG_BCSR;
+	vu_long *bcsr = (vu_long *)CONFIG_SYS_BCSR;
 
 	/* Reset the PHY */
-#if CFG_PHY_ADDR == 0
+#if CONFIG_SYS_PHY_ADDR == 0
 	bcsr[1] &= ~(FETHIEN1 | FETH1_RST);
 	udelay(2);
 	bcsr[1] |=  FETH1_RST;
@@ -234,16 +234,16 @@ void reset_phy (void)
 	bcsr[3] &= ~(FETHIEN2 | FETH2_RST);
 	udelay(2);
 	bcsr[3] |=  FETH2_RST;
-#endif /* CFG_PHY_ADDR == 0 */
+#endif /* CONFIG_SYS_PHY_ADDR == 0 */
 	udelay(1000);
 #ifdef CONFIG_MII
-#if CONFIG_ADSTYPE >= CFG_PQ2FADS
+#if CONFIG_ADSTYPE >= CONFIG_SYS_PQ2FADS
 	/*
 	 * Do not bypass Rx/Tx (de)scrambler (fix configuration error)
 	 * Enable autonegotiation.
 	 */
-	bb_miiphy_write(NULL, CFG_PHY_ADDR, 16, 0x610);
-	bb_miiphy_write(NULL, CFG_PHY_ADDR, PHY_BMCR,
+	bb_miiphy_write(NULL, CONFIG_SYS_PHY_ADDR, 16, 0x610);
+	bb_miiphy_write(NULL, CONFIG_SYS_PHY_ADDR, PHY_BMCR,
 			PHY_BMCR_AUTON | PHY_BMCR_RST_NEG);
 #else
 	/*
@@ -254,14 +254,14 @@ void reset_phy (void)
 	 */
 
 	/* Advertise all capabilities */
-	bb_miiphy_write(NULL, CFG_PHY_ADDR, PHY_ANAR, 0x01E1);
+	bb_miiphy_write(NULL, CONFIG_SYS_PHY_ADDR, PHY_ANAR, 0x01E1);
 
 	/* Do not bypass Rx/Tx (de)scrambler */
-	bb_miiphy_write(NULL, CFG_PHY_ADDR, PHY_DCR,  0x0000);
+	bb_miiphy_write(NULL, CONFIG_SYS_PHY_ADDR, PHY_DCR,  0x0000);
 
-	bb_miiphy_write(NULL, CFG_PHY_ADDR, PHY_BMCR,
+	bb_miiphy_write(NULL, CONFIG_SYS_PHY_ADDR, PHY_BMCR,
 			PHY_BMCR_AUTON | PHY_BMCR_RST_NEG);
-#endif /* CONFIG_ADSTYPE == CFG_PQ2FADS */
+#endif /* CONFIG_ADSTYPE == CONFIG_SYS_PQ2FADS */
 #endif /* CONFIG_MII */
 }
 
@@ -274,10 +274,10 @@ typedef struct pci_ic_s {
 
 int board_early_init_f (void)
 {
-	vu_long *bcsr = (vu_long *)CFG_BCSR;
+	vu_long *bcsr = (vu_long *)CONFIG_SYS_BCSR;
 
 #ifdef CONFIG_PCI
-	volatile pci_ic_t* pci_ic = (pci_ic_t *) CFG_PCI_INT;
+	volatile pci_ic_t* pci_ic = (pci_ic_t *) CONFIG_SYS_PCI_INT;
 
 	/* mask alll the PCI interrupts */
 	pci_ic->pci_int_mask |= 0xfff00000;
@@ -289,19 +289,19 @@ int board_early_init_f (void)
 	bcsr[1] &= ~RS232EN_2;
 #endif
 
-#if CONFIG_ADSTYPE != CFG_8260ADS /* PCI mode can be selected */
-#if CONFIG_ADSTYPE == CFG_PQ2FADS
+#if CONFIG_ADSTYPE != CONFIG_SYS_8260ADS /* PCI mode can be selected */
+#if CONFIG_ADSTYPE == CONFIG_SYS_PQ2FADS
 	if ((bcsr[3] & BCSR_PCI_MODE) == 0) /* PCI mode selected by JP9 */
-#endif /* CONFIG_ADSTYPE == CFG_PQ2FADS */
+#endif /* CONFIG_ADSTYPE == CONFIG_SYS_PQ2FADS */
 	{
-		volatile immap_t *immap = (immap_t *) CFG_IMMR;
+		volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
 
 		immap->im_clkrst.car_sccr |= M826X_SCCR_PCI_MODE_EN;
 		immap->im_siu_conf.sc_siumcr =
 			(immap->im_siu_conf.sc_siumcr & ~SIUMCR_LBPC11)
 			| SIUMCR_LBPC01;
 	}
-#endif /* CONFIG_ADSTYPE != CFG_8260ADS */
+#endif /* CONFIG_ADSTYPE != CONFIG_SYS_8260ADS */
 
 	return 0;
 }
@@ -310,16 +310,16 @@ int board_early_init_f (void)
 
 phys_size_t initdram (int board_type)
 {
-#if   CONFIG_ADSTYPE == CFG_PQ2FADS
+#if   CONFIG_ADSTYPE == CONFIG_SYS_PQ2FADS
 	long int msize = 32;
-#elif CONFIG_ADSTYPE == CFG_8272ADS
+#elif CONFIG_ADSTYPE == CONFIG_SYS_8272ADS
 	long int msize = 64;
 #else
 	long int msize = 16;
 #endif
 
-#ifndef CFG_RAMBOOT
-	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+#ifndef CONFIG_SYS_RAMBOOT
+	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
 	volatile memctl8260_t *memctl = &immap->im_memctl;
 	volatile uchar *ramaddr, c = 0xff;
 	uint or;
@@ -332,33 +332,33 @@ phys_size_t initdram (int board_type)
 	immap->im_siu_conf.sc_ppc_alrh = 0x01267893;
 	immap->im_siu_conf.sc_tescr1   = 0x00004000;
 
-	memctl->memc_mptpr = CFG_MPTPR;
-#ifdef CFG_LSDRAM_BASE
+	memctl->memc_mptpr = CONFIG_SYS_MPTPR;
+#ifdef CONFIG_SYS_LSDRAM_BASE
 	/*
 	  Initialise local bus SDRAM only if the pins
 	  are configured as local bus pins and not as PCI.
 	  The configuration is determined by the HRCW.
 	*/
 	if ((immap->im_siu_conf.sc_siumcr & SIUMCR_LBPC11) == SIUMCR_LBPC00) {
-		memctl->memc_lsrt  = CFG_LSRT;
-#if CONFIG_ADSTYPE == CFG_PQ2FADS /* CS3 */
+		memctl->memc_lsrt  = CONFIG_SYS_LSRT;
+#if CONFIG_ADSTYPE == CONFIG_SYS_PQ2FADS /* CS3 */
 		memctl->memc_or3   = 0xFF803280;
-		memctl->memc_br3   = CFG_LSDRAM_BASE | 0x00001861;
+		memctl->memc_br3   = CONFIG_SYS_LSDRAM_BASE | 0x00001861;
 #else				  /* CS4 */
 		memctl->memc_or4   = 0xFFC01480;
-		memctl->memc_br4   = CFG_LSDRAM_BASE | 0x00001861;
-#endif /* CONFIG_ADSTYPE == CFG_PQ2FADS */
-		memctl->memc_lsdmr = CFG_LSDMR | 0x28000000;
-		ramaddr = (uchar *) CFG_LSDRAM_BASE;
+		memctl->memc_br4   = CONFIG_SYS_LSDRAM_BASE | 0x00001861;
+#endif /* CONFIG_ADSTYPE == CONFIG_SYS_PQ2FADS */
+		memctl->memc_lsdmr = CONFIG_SYS_LSDMR | 0x28000000;
+		ramaddr = (uchar *) CONFIG_SYS_LSDRAM_BASE;
 		*ramaddr = c;
-		memctl->memc_lsdmr = CFG_LSDMR | 0x08000000;
+		memctl->memc_lsdmr = CONFIG_SYS_LSDMR | 0x08000000;
 		for (i = 0; i < 8; i++)
 			*ramaddr = c;
-		memctl->memc_lsdmr = CFG_LSDMR | 0x18000000;
+		memctl->memc_lsdmr = CONFIG_SYS_LSDMR | 0x18000000;
 		*ramaddr = c;
-		memctl->memc_lsdmr = CFG_LSDMR | 0x40000000;
+		memctl->memc_lsdmr = CONFIG_SYS_LSDMR | 0x40000000;
 	}
-#endif /* CFG_LSDRAM_BASE */
+#endif /* CONFIG_SYS_LSDRAM_BASE */
 
 	/* Init 60x bus SDRAM */
 #ifdef CONFIG_SPD_EEPROM
@@ -498,14 +498,14 @@ phys_size_t initdram (int board_type)
 #endif /* SPD_DEBUG */
 	}
 #else  /* !CONFIG_SPD_EEPROM */
-	or    = CFG_OR2;
-	psdmr = CFG_PSDMR;
-	psrt  = CFG_PSRT;
+	or    = CONFIG_SYS_OR2;
+	psdmr = CONFIG_SYS_PSDMR;
+	psrt  = CONFIG_SYS_PSRT;
 #endif /* CONFIG_SPD_EEPROM */
 	memctl->memc_psrt = psrt;
 	memctl->memc_or2 = or;
-	memctl->memc_br2 = CFG_SDRAM_BASE | 0x00000041;
-	ramaddr = (uchar *) CFG_SDRAM_BASE;
+	memctl->memc_br2 = CONFIG_SYS_SDRAM_BASE | 0x00000041;
+	ramaddr = (uchar *) CONFIG_SYS_SDRAM_BASE;
 	memctl->memc_psdmr = psdmr | 0x28000000;	/* Precharge all banks */
 	*ramaddr = c;
 	memctl->memc_psdmr = psdmr | 0x08000000;	/* CBR refresh */
@@ -516,7 +516,7 @@ phys_size_t initdram (int board_type)
 	*ramaddr = c;
 	memctl->memc_psdmr = psdmr | 0x40000000;	/* Refresh enable */
 	*ramaddr = c;
-#endif /* CFG_RAMBOOT */
+#endif /* CONFIG_SYS_RAMBOOT */
 
 	/* return total 60x bus SDRAM size */
 	return (msize * 1024 * 1024);
@@ -524,13 +524,13 @@ phys_size_t initdram (int board_type)
 
 int checkboard (void)
 {
-#if   CONFIG_ADSTYPE == CFG_8260ADS
+#if   CONFIG_ADSTYPE == CONFIG_SYS_8260ADS
 	puts ("Board: Motorola MPC8260ADS\n");
-#elif CONFIG_ADSTYPE == CFG_8266ADS
+#elif CONFIG_ADSTYPE == CONFIG_SYS_8266ADS
 	puts ("Board: Motorola MPC8266ADS\n");
-#elif CONFIG_ADSTYPE == CFG_PQ2FADS
+#elif CONFIG_ADSTYPE == CONFIG_SYS_PQ2FADS
 	puts ("Board: Motorola PQ2FADS-ZU\n");
-#elif CONFIG_ADSTYPE == CFG_8272ADS
+#elif CONFIG_ADSTYPE == CONFIG_SYS_8272ADS
 	puts ("Board: Motorola MPC8272ADS\n");
 #else
 	puts ("Board: unknown\n");
diff --git a/board/freescale/mpc8266ads/flash.c b/board/freescale/mpc8266ads/flash.c
index 9512c72a0..06dde36e6 100644
--- a/board/freescale/mpc8266ads/flash.c
+++ b/board/freescale/mpc8266ads/flash.c
@@ -29,17 +29,17 @@
 #include <common.h>
 
 
-flash_info_t	flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips	*/
+flash_info_t	flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips	*/
 
-#if defined(CFG_ENV_IS_IN_FLASH)
-# ifndef  CFG_ENV_ADDR
-#  define CFG_ENV_ADDR	(CFG_FLASH_BASE + CFG_ENV_OFFSET)
+#if defined(CONFIG_ENV_IS_IN_FLASH)
+# ifndef  CONFIG_ENV_ADDR
+#  define CONFIG_ENV_ADDR	(CONFIG_SYS_FLASH_BASE + CONFIG_ENV_OFFSET)
 # endif
-# ifndef  CFG_ENV_SIZE
-#  define CFG_ENV_SIZE	CFG_ENV_SECT_SIZE
+# ifndef  CONFIG_ENV_SIZE
+#  define CONFIG_ENV_SIZE	CONFIG_ENV_SECT_SIZE
 # endif
-# ifndef  CFG_ENV_SECT_SIZE
-#  define CFG_ENV_SECT_SIZE  CFG_ENV_SIZE
+# ifndef  CONFIG_ENV_SECT_SIZE
+#  define CONFIG_ENV_SECT_SIZE  CONFIG_ENV_SIZE
 # endif
 #endif
 
@@ -56,7 +56,7 @@ static int clear_block_lock_bit(vu_long * addr);
 unsigned long flash_init (void)
 {
 #ifndef CONFIG_MPC8266ADS
-	volatile immap_t	*immap  = (immap_t *)CFG_IMMR;
+	volatile immap_t	*immap  = (immap_t *)CONFIG_SYS_IMMR;
 	volatile memctl8xx_t	*memctl = &immap->im_memctl;
 	volatile ip860_bcsr_t	*bcsr   = (ip860_bcsr_t *)BCSR_BASE;
 #endif
@@ -71,7 +71,7 @@ unsigned long flash_init (void)
 #endif
 
 
-	for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) {
+	for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
 		flash_info[i].flash_id = FLASH_UNKNOWN;
 
 		/* set the default sector offset */
@@ -88,28 +88,28 @@ unsigned long flash_init (void)
 
 #ifndef CONFIG_MPC8266ADS
 	/* Remap FLASH according to real size */
-	memctl->memc_or1 = CFG_OR_TIMING_FLASH | (-size & 0xFFFF8000);
-	memctl->memc_br1 = (CFG_FLASH_BASE & BR_BA_MSK) |
+	memctl->memc_or1 = CONFIG_SYS_OR_TIMING_FLASH | (-size & 0xFFFF8000);
+	memctl->memc_br1 = (CONFIG_SYS_FLASH_BASE & BR_BA_MSK) |
 				(memctl->memc_br1 & ~(BR_BA_MSK));
 #endif
 	/* Re-do sizing to get full correct info */
-	size = flash_get_size((vu_long *)CFG_FLASH_BASE, &flash_info[0]);
+	size = flash_get_size((vu_long *)CONFIG_SYS_FLASH_BASE, &flash_info[0]);
 
 	flash_info[0].size = size;
 
-#if CFG_MONITOR_BASE >= CFG_FLASH_BASE
+#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE
 	/* monitor protection ON by default */
 	flash_protect(FLAG_PROTECT_SET,
-		      CFG_MONITOR_BASE,
-		      CFG_MONITOR_BASE+monitor_flash_len-1,
+		      CONFIG_SYS_MONITOR_BASE,
+		      CONFIG_SYS_MONITOR_BASE+monitor_flash_len-1,
 		      &flash_info[0]);
 #endif
 
-#ifdef	CFG_ENV_IS_IN_FLASH
+#ifdef	CONFIG_ENV_IS_IN_FLASH
 	/* ENV protection ON by default */
 	flash_protect(FLAG_PROTECT_SET,
-		      CFG_ENV_ADDR,
-		      CFG_ENV_ADDR+CFG_ENV_SECT_SIZE-1,
+		      CONFIG_ENV_ADDR,
+		      CONFIG_ENV_ADDR+CONFIG_ENV_SECT_SIZE-1,
 		      &flash_info[0]);
 #endif
 	return (size);
@@ -336,7 +336,7 @@ int	flash_erase (flash_info_t *info, int s_first, int s_last)
 					*addr = 0xFFFFFFFF;	/* reset bank */
 					return 1;
 				}
-				if ((now=get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+				if ((now=get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
 					printf ("Timeout\n");
 					*addr = 0xFFFFFFFF;	/* reset bank */
 					return 1;
@@ -461,7 +461,7 @@ static int write_word (flash_info_t *info, ulong dest, ulong data)
 	start = get_timer (0);
 	flag  = 0;
 	while (((csr = *addr) & 0x80808080) != 0x80808080) {
-		if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+		if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
 			flag = 1;
 			break;
 		}
@@ -499,7 +499,7 @@ static int clear_block_lock_bit(vu_long  * addr)
 
 	start = get_timer (0);
 	while(*addr != 0x80808080){
-		if ((now=get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+		if ((now=get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
 			printf ("Timeout on clearing Block Lock Bit\n");
 			*addr = 0xFFFFFFFF;	/* reset bank */
 			return 1;
diff --git a/board/freescale/mpc8266ads/mpc8266ads.c b/board/freescale/mpc8266ads/mpc8266ads.c
index 090a53413..66acc41e9 100644
--- a/board/freescale/mpc8266ads/mpc8266ads.c
+++ b/board/freescale/mpc8266ads/mpc8266ads.c
@@ -224,7 +224,7 @@ typedef struct pci_ic_s {
 
 void reset_phy(void)
 {
-    volatile bcsr_t  *bcsr           = (bcsr_t *)CFG_BCSR;
+    volatile bcsr_t  *bcsr           = (bcsr_t *)CONFIG_SYS_BCSR;
 
     /* reset the FEC port */
     bcsr->bcsr1                    &= ~FETH_RST;
@@ -234,8 +234,8 @@ void reset_phy(void)
 
 int board_early_init_f (void)
 {
-    volatile bcsr_t  *bcsr         = (bcsr_t *)CFG_BCSR;
-    volatile pci_ic_t *pci_ic      = (pci_ic_t *) CFG_PCI_INT;
+    volatile bcsr_t  *bcsr         = (bcsr_t *)CONFIG_SYS_BCSR;
+    volatile pci_ic_t *pci_ic      = (pci_ic_t *) CONFIG_SYS_PCI_INT;
 
     bcsr->bcsr1                    = ~FETHIEN & ~RS232EN_1 & ~RS232EN_2;
 
@@ -254,17 +254,17 @@ int checkboard(void)
 phys_size_t initdram(int board_type)
 {
 	/* Autoinit part stolen from board/sacsng/sacsng.c */
-    volatile immap_t *immap         = (immap_t *)CFG_IMMR;
+    volatile immap_t *immap         = (immap_t *)CONFIG_SYS_IMMR;
     volatile memctl8260_t *memctl   = &immap->im_memctl;
     volatile uchar c = 0xff;
-    volatile uchar *ramaddr = (uchar *)(CFG_SDRAM_BASE + 0x8);
-    uint  psdmr = CFG_PSDMR;
+    volatile uchar *ramaddr = (uchar *)(CONFIG_SYS_SDRAM_BASE + 0x8);
+    uint  psdmr = CONFIG_SYS_PSDMR;
     int i;
 
     uint   psrt = 0x21;					/* for no SPD */
     uint   chipselects = 1;				/* for no SPD */
-    uint   sdram_size = CFG_SDRAM_SIZE * 1024 * 1024;	/* for no SPD */
-    uint   or = CFG_OR2_PRELIM;				/* for no SPD */
+    uint   sdram_size = CONFIG_SYS_SDRAM_SIZE * 1024 * 1024;	/* for no SPD */
+    uint   or = CONFIG_SYS_OR2_PRELIM;				/* for no SPD */
     uint   data_width;
     uint   rows;
     uint   banks;
@@ -286,7 +286,7 @@ phys_size_t initdram(int board_type)
     /*
      * Read the SDRAM SPD EEPROM via I2C.
      */
-	i2c_init (CFG_I2C_SPEED, CFG_I2C_SLAVE);
+	i2c_init (CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
 
     i2c_read(SDRAM_SPD_ADDR, 0, 1, &data, 1);
     spd_size = data;
@@ -506,13 +506,13 @@ phys_size_t initdram(int board_type)
      *  accessing the SDRAM with a single-byte transaction."
      *
      * The appropriate BRx/ORx registers have already been set when we
-     * get here. The SDRAM can be accessed at the address CFG_SDRAM_BASE.
+     * get here. The SDRAM can be accessed at the address CONFIG_SYS_SDRAM_BASE.
      */
 
-    memctl->memc_mptpr = CFG_MPTPR;
+    memctl->memc_mptpr = CONFIG_SYS_MPTPR;
     memctl->memc_psrt  = psrt;
 
-    memctl->memc_br2 = CFG_BR2_PRELIM;
+    memctl->memc_br2 = CONFIG_SYS_BR2_PRELIM;
     memctl->memc_or2 = or;
 
     memctl->memc_psdmr = psdmr | PSDMR_OP_PREA;
@@ -536,7 +536,7 @@ phys_size_t initdram(int board_type)
 	{
 	ramaddr += sdram_size;
 
-		memctl->memc_br3 = CFG_BR3_PRELIM + sdram_size;
+		memctl->memc_br3 = CONFIG_SYS_BR3_PRELIM + sdram_size;
 		memctl->memc_or3 = or;
 
 		memctl->memc_psdmr = psdmr | PSDMR_OP_PREA;
diff --git a/board/freescale/mpc8313erdb/mpc8313erdb.c b/board/freescale/mpc8313erdb/mpc8313erdb.c
index ebb703d3e..9ffd4bff8 100644
--- a/board/freescale/mpc8313erdb/mpc8313erdb.c
+++ b/board/freescale/mpc8313erdb/mpc8313erdb.c
@@ -36,8 +36,8 @@ DECLARE_GLOBAL_DATA_PTR;
 
 int board_early_init_f(void)
 {
-#ifndef CFG_8313ERDB_BROKEN_PMC
-	volatile immap_t *im = (immap_t *)CFG_IMMR;
+#ifndef CONFIG_SYS_8313ERDB_BROKEN_PMC
+	volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
 
 	if (im->pmc.pmccr1 & PMCCR1_POWER_OFF)
 		gd->flags |= GD_FLG_SILENT;
@@ -55,28 +55,28 @@ int checkboard(void)
 #ifndef CONFIG_NAND_SPL
 static struct pci_region pci_regions[] = {
 	{
-		bus_start: CFG_PCI1_MEM_BASE,
-		phys_start: CFG_PCI1_MEM_PHYS,
-		size: CFG_PCI1_MEM_SIZE,
+		bus_start: CONFIG_SYS_PCI1_MEM_BASE,
+		phys_start: CONFIG_SYS_PCI1_MEM_PHYS,
+		size: CONFIG_SYS_PCI1_MEM_SIZE,
 		flags: PCI_REGION_MEM | PCI_REGION_PREFETCH
 	},
 	{
-		bus_start: CFG_PCI1_MMIO_BASE,
-		phys_start: CFG_PCI1_MMIO_PHYS,
-		size: CFG_PCI1_MMIO_SIZE,
+		bus_start: CONFIG_SYS_PCI1_MMIO_BASE,
+		phys_start: CONFIG_SYS_PCI1_MMIO_PHYS,
+		size: CONFIG_SYS_PCI1_MMIO_SIZE,
 		flags: PCI_REGION_MEM
 	},
 	{
-		bus_start: CFG_PCI1_IO_BASE,
-		phys_start: CFG_PCI1_IO_PHYS,
-		size: CFG_PCI1_IO_SIZE,
+		bus_start: CONFIG_SYS_PCI1_IO_BASE,
+		phys_start: CONFIG_SYS_PCI1_IO_PHYS,
+		size: CONFIG_SYS_PCI1_IO_SIZE,
 		flags: PCI_REGION_IO
 	}
 };
 
 void pci_init_board(void)
 {
-	volatile immap_t *immr = (volatile immap_t *)CFG_IMMR;
+	volatile immap_t *immr = (volatile immap_t *)CONFIG_SYS_IMMR;
 	volatile clk83xx_t *clk = (volatile clk83xx_t *)&immr->clk;
 	volatile law83xx_t *pci_law = immr->sysconf.pcilaw;
 	struct pci_region *reg[] = { pci_regions };
@@ -88,14 +88,14 @@ void pci_init_board(void)
 	/*
 	 * Configure PCI Local Access Windows
 	 */
-	pci_law[0].bar = CFG_PCI1_MEM_PHYS & LAWBAR_BAR;
+	pci_law[0].bar = CONFIG_SYS_PCI1_MEM_PHYS & LAWBAR_BAR;
 	pci_law[0].ar = LBLAWAR_EN | LBLAWAR_512MB;
 
-	pci_law[1].bar = CFG_PCI1_IO_PHYS & LAWBAR_BAR;
+	pci_law[1].bar = CONFIG_SYS_PCI1_IO_PHYS & LAWBAR_BAR;
 	pci_law[1].ar = LBLAWAR_EN | LBLAWAR_1MB;
 
 	warmboot = gd->bd->bi_bootflags & BOOTFLAG_WARM;
-#ifndef CFG_8313ERDB_BROKEN_PMC
+#ifndef CONFIG_SYS_8313ERDB_BROKEN_PMC
 	warmboot |= immr->pmc.pmccr1 & PMCCR1_POWER_OFF;
 #endif
 
@@ -135,13 +135,13 @@ void ft_board_setup(void *blob, bd_t *bd)
 void board_init_f(ulong bootflag)
 {
 	board_early_init_f();
-	NS16550_init((NS16550_t)(CFG_IMMR + 0x4500),
-	             CFG_NS16550_CLK / 16 / CONFIG_BAUDRATE);
+	NS16550_init((NS16550_t)(CONFIG_SYS_IMMR + 0x4500),
+	             CONFIG_SYS_NS16550_CLK / 16 / CONFIG_BAUDRATE);
 	puts("NAND boot... ");
 	init_timebase();
 	initdram(0);
-	relocate_code(CFG_NAND_U_BOOT_RELOC + 0x10000, (gd_t *)gd,
-	              CFG_NAND_U_BOOT_RELOC);
+	relocate_code(CONFIG_SYS_NAND_U_BOOT_RELOC + 0x10000, (gd_t *)gd,
+	              CONFIG_SYS_NAND_U_BOOT_RELOC);
 }
 
 void board_init_r(gd_t *gd, ulong dest_addr)
@@ -155,8 +155,8 @@ void putc(char c)
 		return;
 
 	if (c == '\n')
-		NS16550_putc((NS16550_t)(CFG_IMMR + 0x4500), '\r');
+		NS16550_putc((NS16550_t)(CONFIG_SYS_IMMR + 0x4500), '\r');
 
-	NS16550_putc((NS16550_t)(CFG_IMMR + 0x4500), c);
+	NS16550_putc((NS16550_t)(CONFIG_SYS_IMMR + 0x4500), c);
 }
 #endif
diff --git a/board/freescale/mpc8313erdb/sdram.c b/board/freescale/mpc8313erdb/sdram.c
index 3a6347fe1..cb138296b 100644
--- a/board/freescale/mpc8313erdb/sdram.c
+++ b/board/freescale/mpc8313erdb/sdram.c
@@ -35,7 +35,7 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
-#ifndef CFG_8313ERDB_BROKEN_PMC
+#ifndef CONFIG_SYS_8313ERDB_BROKEN_PMC
 static void resume_from_sleep(void)
 {
 	u32 magic = *(u32 *)0;
@@ -58,15 +58,15 @@ static void resume_from_sleep(void)
  */
 static long fixed_sdram(void)
 {
-	u32 msize = CFG_DDR_SIZE * 1024 * 1024;
+	u32 msize = CONFIG_SYS_DDR_SIZE * 1024 * 1024;
 
-#ifndef CFG_RAMBOOT
-	volatile immap_t *im = (volatile immap_t *)CFG_IMMR;
+#ifndef CONFIG_SYS_RAMBOOT
+	volatile immap_t *im = (volatile immap_t *)CONFIG_SYS_IMMR;
 	u32 msize_log2 = __ilog2(msize);
 
-	im->sysconf.ddrlaw[0].bar = CFG_DDR_SDRAM_BASE >> 12;
+	im->sysconf.ddrlaw[0].bar = CONFIG_SYS_DDR_SDRAM_BASE & 0xfffff000;
 	im->sysconf.ddrlaw[0].ar = LBLAWAR_EN | (msize_log2 - 1);
-	im->sysconf.ddrcdr = CFG_DDRCDR_VALUE;
+	im->sysconf.ddrcdr = CONFIG_SYS_DDRCDR_VALUE;
 
 	/*
 	 * Erratum DDR3 requires a 50ms delay after clearing DDRCDR[DDR_cfg],
@@ -75,29 +75,29 @@ static long fixed_sdram(void)
 	udelay(50000);
 
 	im->ddr.csbnds[0].csbnds = (msize - 1) >> 24;
-	im->ddr.cs_config[0] = CFG_DDR_CONFIG;
+	im->ddr.cs_config[0] = CONFIG_SYS_DDR_CONFIG;
 
 	/* Currently we use only one CS, so disable the other bank. */
 	im->ddr.cs_config[1] = 0;
 
-	im->ddr.sdram_clk_cntl = CFG_DDR_CLK_CNTL;
-	im->ddr.timing_cfg_3 = CFG_DDR_TIMING_3;
-	im->ddr.timing_cfg_1 = CFG_DDR_TIMING_1;
-	im->ddr.timing_cfg_2 = CFG_DDR_TIMING_2;
-	im->ddr.timing_cfg_0 = CFG_DDR_TIMING_0;
+	im->ddr.sdram_clk_cntl = CONFIG_SYS_DDR_CLK_CNTL;
+	im->ddr.timing_cfg_3 = CONFIG_SYS_DDR_TIMING_3;
+	im->ddr.timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1;
+	im->ddr.timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2;
+	im->ddr.timing_cfg_0 = CONFIG_SYS_DDR_TIMING_0;
 
-#ifndef CFG_8313ERDB_BROKEN_PMC
+#ifndef CONFIG_SYS_8313ERDB_BROKEN_PMC
 	if (im->pmc.pmccr1 & PMCCR1_POWER_OFF)
-		im->ddr.sdram_cfg = CFG_SDRAM_CFG | SDRAM_CFG_BI;
+		im->ddr.sdram_cfg = CONFIG_SYS_SDRAM_CFG | SDRAM_CFG_BI;
 	else
 #endif
-		im->ddr.sdram_cfg = CFG_SDRAM_CFG;
+		im->ddr.sdram_cfg = CONFIG_SYS_SDRAM_CFG;
 
-	im->ddr.sdram_cfg2 = CFG_SDRAM_CFG2;
-	im->ddr.sdram_mode = CFG_DDR_MODE;
-	im->ddr.sdram_mode2 = CFG_DDR_MODE_2;
+	im->ddr.sdram_cfg2 = CONFIG_SYS_SDRAM_CFG2;
+	im->ddr.sdram_mode = CONFIG_SYS_DDR_MODE;
+	im->ddr.sdram_mode2 = CONFIG_SYS_DDR_MODE_2;
 
-	im->ddr.sdram_interval = CFG_DDR_INTERVAL;
+	im->ddr.sdram_interval = CONFIG_SYS_DDR_INTERVAL;
 	sync();
 
 	/* enable DDR controller */
@@ -109,8 +109,8 @@ static long fixed_sdram(void)
 
 phys_size_t initdram(int board_type)
 {
-	volatile immap_t *im = (volatile immap_t *)CFG_IMMR;
-	volatile lbus83xx_t *lbc = &im->lbus;
+	volatile immap_t *im = (volatile immap_t *)CONFIG_SYS_IMMR;
+	volatile fsl_lbus_t *lbc = &im->lbus;
 	u32 msize;
 
 	if ((im->sysconf.immrbar & IMMRBAR_BASE_ADDR) != (u32)im)
@@ -120,11 +120,11 @@ phys_size_t initdram(int board_type)
 	msize = fixed_sdram();
 
 	/* Local Bus setup lbcr and mrtpr */
-	lbc->lbcr = CFG_LBC_LBCR;
-	lbc->mrtpr = CFG_LBC_MRTPR;
+	lbc->lbcr = CONFIG_SYS_LBC_LBCR;
+	lbc->mrtpr = CONFIG_SYS_LBC_MRTPR;
 	sync();
 
-#ifndef CFG_8313ERDB_BROKEN_PMC
+#ifndef CONFIG_SYS_8313ERDB_BROKEN_PMC
 	if (im->pmc.pmccr1 & PMCCR1_POWER_OFF)
 		resume_from_sleep();
 #endif
diff --git a/board/freescale/mpc8315erdb/mpc8315erdb.c b/board/freescale/mpc8315erdb/mpc8315erdb.c
index 3eecee251..ea4b04fd3 100644
--- a/board/freescale/mpc8315erdb/mpc8315erdb.c
+++ b/board/freescale/mpc8315erdb/mpc8315erdb.c
@@ -29,12 +29,13 @@
 #include <fdt_support.h>
 #include <pci.h>
 #include <mpc83xx.h>
+#include <netdev.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
 int board_early_init_f(void)
 {
-	volatile immap_t *im = (immap_t *)CFG_IMMR;
+	volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
 
 	if (im->pmc.pmccr1 & PMCCR1_POWER_OFF)
 		gd->flags |= GD_FLG_SILENT;
@@ -47,7 +48,7 @@ static u8 read_board_info(void)
 	u8 val8;
 	i2c_set_bus_num(0);
 
-	if (i2c_read(CFG_I2C_PCF8574A_ADDR, 0, 0, &val8, 1) == 0)
+	if (i2c_read(CONFIG_SYS_I2C_PCF8574A_ADDR, 0, 0, &val8, 1) == 0)
 		return val8;
 	else
 		return 0;
@@ -75,28 +76,28 @@ int checkboard(void)
 
 static struct pci_region pci_regions[] = {
 	{
-		bus_start: CFG_PCI_MEM_BASE,
-		phys_start: CFG_PCI_MEM_PHYS,
-		size: CFG_PCI_MEM_SIZE,
+		bus_start: CONFIG_SYS_PCI_MEM_BASE,
+		phys_start: CONFIG_SYS_PCI_MEM_PHYS,
+		size: CONFIG_SYS_PCI_MEM_SIZE,
 		flags: PCI_REGION_MEM | PCI_REGION_PREFETCH
 	},
 	{
-		bus_start: CFG_PCI_MMIO_BASE,
-		phys_start: CFG_PCI_MMIO_PHYS,
-		size: CFG_PCI_MMIO_SIZE,
+		bus_start: CONFIG_SYS_PCI_MMIO_BASE,
+		phys_start: CONFIG_SYS_PCI_MMIO_PHYS,
+		size: CONFIG_SYS_PCI_MMIO_SIZE,
 		flags: PCI_REGION_MEM
 	},
 	{
-		bus_start: CFG_PCI_IO_BASE,
-		phys_start: CFG_PCI_IO_PHYS,
-		size: CFG_PCI_IO_SIZE,
+		bus_start: CONFIG_SYS_PCI_IO_BASE,
+		phys_start: CONFIG_SYS_PCI_IO_PHYS,
+		size: CONFIG_SYS_PCI_IO_SIZE,
 		flags: PCI_REGION_IO
 	}
 };
 
 void pci_init_board(void)
 {
-	volatile immap_t *immr = (volatile immap_t *)CFG_IMMR;
+	volatile immap_t *immr = (volatile immap_t *)CONFIG_SYS_IMMR;
 	volatile clk83xx_t *clk = (volatile clk83xx_t *)&immr->clk;
 	volatile law83xx_t *pci_law = immr->sysconf.pcilaw;
 	struct pci_region *reg[] = { pci_regions };
@@ -108,10 +109,10 @@ void pci_init_board(void)
 	/*
 	 * Configure PCI Local Access Windows
 	 */
-	pci_law[0].bar = CFG_PCI_MEM_PHYS & LAWBAR_BAR;
+	pci_law[0].bar = CONFIG_SYS_PCI_MEM_PHYS & LAWBAR_BAR;
 	pci_law[0].ar = LBLAWAR_EN | LBLAWAR_512MB;
 
-	pci_law[1].bar = CFG_PCI_IO_PHYS & LAWBAR_BAR;
+	pci_law[1].bar = CONFIG_SYS_PCI_IO_PHYS & LAWBAR_BAR;
 	pci_law[1].ar = LBLAWAR_EN | LBLAWAR_1MB;
 
 	warmboot = gd->bd->bi_bootflags & BOOTFLAG_WARM;
@@ -165,3 +166,9 @@ void ft_board_setup(void *blob, bd_t *bd)
 	fdt_tsec1_fixup(blob, bd);
 }
 #endif
+
+int board_eth_init(bd_t *bis)
+{
+	cpu_eth_init(bis);	/* Initialize TSECs first */
+	return pci_eth_init(bis);
+}
diff --git a/board/freescale/mpc8315erdb/sdram.c b/board/freescale/mpc8315erdb/sdram.c
index 07e6486ee..ead7b1e0d 100644
--- a/board/freescale/mpc8315erdb/sdram.c
+++ b/board/freescale/mpc8315erdb/sdram.c
@@ -56,13 +56,13 @@ static void resume_from_sleep(void)
  */
 static long fixed_sdram(void)
 {
-	volatile immap_t *im = (volatile immap_t *)CFG_IMMR;
-	u32 msize = CFG_DDR_SIZE * 1024 * 1024;
+	volatile immap_t *im = (volatile immap_t *)CONFIG_SYS_IMMR;
+	u32 msize = CONFIG_SYS_DDR_SIZE * 1024 * 1024;
 	u32 msize_log2 = __ilog2(msize);
 
-	im->sysconf.ddrlaw[0].bar = CFG_DDR_SDRAM_BASE >> 12;
+	im->sysconf.ddrlaw[0].bar = CONFIG_SYS_DDR_SDRAM_BASE  & 0xfffff000;
 	im->sysconf.ddrlaw[0].ar = LBLAWAR_EN | (msize_log2 - 1);
-	im->sysconf.ddrcdr = CFG_DDRCDR_VALUE;
+	im->sysconf.ddrcdr = CONFIG_SYS_DDRCDR_VALUE;
 
 	/*
 	 * Erratum DDR3 requires a 50ms delay after clearing DDRCDR[DDR_cfg],
@@ -71,27 +71,27 @@ static long fixed_sdram(void)
 	udelay(50000);
 
 	im->ddr.csbnds[0].csbnds = (msize - 1) >> 24;
-	im->ddr.cs_config[0] = CFG_DDR_CS0_CONFIG;
+	im->ddr.cs_config[0] = CONFIG_SYS_DDR_CS0_CONFIG;
 
 	/* Currently we use only one CS, so disable the other bank. */
 	im->ddr.cs_config[1] = 0;
 
-	im->ddr.sdram_clk_cntl = CFG_DDR_SDRAM_CLK_CNTL;
-	im->ddr.timing_cfg_3 = CFG_DDR_TIMING_3;
-	im->ddr.timing_cfg_1 = CFG_DDR_TIMING_1;
-	im->ddr.timing_cfg_2 = CFG_DDR_TIMING_2;
-	im->ddr.timing_cfg_0 = CFG_DDR_TIMING_0;
+	im->ddr.sdram_clk_cntl = CONFIG_SYS_DDR_SDRAM_CLK_CNTL;
+	im->ddr.timing_cfg_3 = CONFIG_SYS_DDR_TIMING_3;
+	im->ddr.timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1;
+	im->ddr.timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2;
+	im->ddr.timing_cfg_0 = CONFIG_SYS_DDR_TIMING_0;
 
 	if (im->pmc.pmccr1 & PMCCR1_POWER_OFF)
-		im->ddr.sdram_cfg = CFG_DDR_SDRAM_CFG | SDRAM_CFG_BI;
+		im->ddr.sdram_cfg = CONFIG_SYS_DDR_SDRAM_CFG | SDRAM_CFG_BI;
 	else
-		im->ddr.sdram_cfg = CFG_DDR_SDRAM_CFG;
+		im->ddr.sdram_cfg = CONFIG_SYS_DDR_SDRAM_CFG;
 
-	im->ddr.sdram_cfg2 = CFG_DDR_SDRAM_CFG2;
-	im->ddr.sdram_mode = CFG_DDR_MODE;
-	im->ddr.sdram_mode2 = CFG_DDR_MODE2;
+	im->ddr.sdram_cfg2 = CONFIG_SYS_DDR_SDRAM_CFG2;
+	im->ddr.sdram_mode = CONFIG_SYS_DDR_MODE;
+	im->ddr.sdram_mode2 = CONFIG_SYS_DDR_MODE2;
 
-	im->ddr.sdram_interval = CFG_DDR_INTERVAL;
+	im->ddr.sdram_interval = CONFIG_SYS_DDR_INTERVAL;
 	sync();
 
 	/* enable DDR controller */
@@ -103,7 +103,7 @@ static long fixed_sdram(void)
 
 phys_size_t initdram(int board_type)
 {
-	volatile immap_t *im = (volatile immap_t *)CFG_IMMR;
+	volatile immap_t *im = (volatile immap_t *)CONFIG_SYS_IMMR;
 	u32 msize;
 
 	if ((im->sysconf.immrbar & IMMRBAR_BASE_ADDR) != (u32)im)
diff --git a/board/freescale/mpc8323erdb/mpc8323erdb.c b/board/freescale/mpc8323erdb/mpc8323erdb.c
index f5220abdb..8680a19a6 100644
--- a/board/freescale/mpc8323erdb/mpc8323erdb.c
+++ b/board/freescale/mpc8323erdb/mpc8323erdb.c
@@ -75,14 +75,14 @@ int fixed_sdram(void);
 
 phys_size_t initdram(int board_type)
 {
-	volatile immap_t *im = (immap_t *) CFG_IMMR;
+	volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR;
 	u32 msize = 0;
 
 	if ((im->sysconf.immrbar & IMMRBAR_BASE_ADDR) != (u32) im)
 		return -1;
 
 	/* DDR SDRAM - Main SODIMM */
-	im->sysconf.ddrlaw[0].bar = CFG_DDR_BASE & LAWBAR_BAR;
+	im->sysconf.ddrlaw[0].bar = CONFIG_SYS_DDR_BASE & LAWBAR_BAR;
 
 	msize = fixed_sdram();
 
@@ -95,12 +95,12 @@ phys_size_t initdram(int board_type)
  ************************************************************************/
 int fixed_sdram(void)
 {
-	volatile immap_t *im = (immap_t *) CFG_IMMR;
+	volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR;
 	u32 msize = 0;
 	u32 ddr_size;
 	u32 ddr_size_log2;
 
-	msize = CFG_DDR_SIZE;
+	msize = CONFIG_SYS_DDR_SIZE;
 	for (ddr_size = msize << 20, ddr_size_log2 = 0;
 	     (ddr_size > 1); ddr_size = ddr_size >> 1, ddr_size_log2++) {
 		if (ddr_size & 1) {
@@ -109,18 +109,18 @@ int fixed_sdram(void)
 	}
 	im->sysconf.ddrlaw[0].ar =
 	    LAWAR_EN | ((ddr_size_log2 - 1) & LAWAR_SIZE);
-	im->ddr.sdram_clk_cntl = CFG_DDR_CLK_CNTL;
-	im->ddr.csbnds[0].csbnds = CFG_DDR_CS0_BNDS;
-	im->ddr.cs_config[0] = CFG_DDR_CS0_CONFIG;
-	im->ddr.timing_cfg_0 = CFG_DDR_TIMING_0;
-	im->ddr.timing_cfg_1 = CFG_DDR_TIMING_1;
-	im->ddr.timing_cfg_2 = CFG_DDR_TIMING_2;
-	im->ddr.timing_cfg_3 = CFG_DDR_TIMING_3;
-	im->ddr.sdram_cfg = CFG_DDR_SDRAM_CFG;
-	im->ddr.sdram_cfg2 = CFG_DDR_SDRAM_CFG2;
-	im->ddr.sdram_mode = CFG_DDR_MODE;
-	im->ddr.sdram_mode2 = CFG_DDR_MODE2;
-	im->ddr.sdram_interval = CFG_DDR_INTERVAL;
+	im->ddr.sdram_clk_cntl = CONFIG_SYS_DDR_CLK_CNTL;
+	im->ddr.csbnds[0].csbnds = CONFIG_SYS_DDR_CS0_BNDS;
+	im->ddr.cs_config[0] = CONFIG_SYS_DDR_CS0_CONFIG;
+	im->ddr.timing_cfg_0 = CONFIG_SYS_DDR_TIMING_0;
+	im->ddr.timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1;
+	im->ddr.timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2;
+	im->ddr.timing_cfg_3 = CONFIG_SYS_DDR_TIMING_3;
+	im->ddr.sdram_cfg = CONFIG_SYS_DDR_SDRAM_CFG;
+	im->ddr.sdram_cfg2 = CONFIG_SYS_DDR_SDRAM_CFG2;
+	im->ddr.sdram_mode = CONFIG_SYS_DDR_MODE;
+	im->ddr.sdram_mode2 = CONFIG_SYS_DDR_MODE2;
+	im->ddr.sdram_interval = CONFIG_SYS_DDR_INTERVAL;
 	__asm__ __volatile__ ("sync");
 	udelay(200);
 
@@ -137,28 +137,28 @@ int checkboard(void)
 
 static struct pci_region pci_regions[] = {
 	{
-		bus_start: CFG_PCI1_MEM_BASE,
-		phys_start: CFG_PCI1_MEM_PHYS,
-		size: CFG_PCI1_MEM_SIZE,
+		bus_start: CONFIG_SYS_PCI1_MEM_BASE,
+		phys_start: CONFIG_SYS_PCI1_MEM_PHYS,
+		size: CONFIG_SYS_PCI1_MEM_SIZE,
 		flags: PCI_REGION_MEM | PCI_REGION_PREFETCH
 	},
 	{
-		bus_start: CFG_PCI1_MMIO_BASE,
-		phys_start: CFG_PCI1_MMIO_PHYS,
-		size: CFG_PCI1_MMIO_SIZE,
+		bus_start: CONFIG_SYS_PCI1_MMIO_BASE,
+		phys_start: CONFIG_SYS_PCI1_MMIO_PHYS,
+		size: CONFIG_SYS_PCI1_MMIO_SIZE,
 		flags: PCI_REGION_MEM
 	},
 	{
-		bus_start: CFG_PCI1_IO_BASE,
-		phys_start: CFG_PCI1_IO_PHYS,
-		size: CFG_PCI1_IO_SIZE,
+		bus_start: CONFIG_SYS_PCI1_IO_BASE,
+		phys_start: CONFIG_SYS_PCI1_IO_PHYS,
+		size: CONFIG_SYS_PCI1_IO_SIZE,
 		flags: PCI_REGION_IO
 	}
 };
 
 void pci_init_board(void)
 {
-	volatile immap_t *immr = (volatile immap_t *)CFG_IMMR;
+	volatile immap_t *immr = (volatile immap_t *)CONFIG_SYS_IMMR;
 	volatile clk83xx_t *clk = (volatile clk83xx_t *)&immr->clk;
 	volatile law83xx_t *pci_law = immr->sysconf.pcilaw;
 	struct pci_region *reg[] = { pci_regions };
@@ -167,10 +167,10 @@ void pci_init_board(void)
 	clk->occr |= 0xe0000000;
 
 	/* Configure PCI Local Access Windows */
-	pci_law[0].bar = CFG_PCI1_MEM_PHYS & LAWBAR_BAR;
+	pci_law[0].bar = CONFIG_SYS_PCI1_MEM_PHYS & LAWBAR_BAR;
 	pci_law[0].ar = LBLAWAR_EN | LBLAWAR_512MB;
 
-	pci_law[1].bar = CFG_PCI1_IO_PHYS & LAWBAR_BAR;
+	pci_law[1].bar = CONFIG_SYS_PCI1_IO_PHYS & LAWBAR_BAR;
 	pci_law[1].ar = LBLAWAR_EN | LBLAWAR_1MB;
 
 	mpc83xx_pci_init(1, reg, 0);
@@ -186,7 +186,7 @@ void ft_board_setup(void *blob, bd_t *bd)
 }
 #endif
 
-#if defined(CFG_I2C_MAC_OFFSET)
+#if defined(CONFIG_SYS_I2C_MAC_OFFSET)
 int mac_read_from_eeprom(void)
 {
 	uchar buf[28];
@@ -196,9 +196,9 @@ int mac_read_from_eeprom(void)
 	unsigned char enetvar[32];
 
 	/* Read MAC addresses from EEPROM */
-	if (eeprom_read(CFG_I2C_EEPROM_ADDR, CFG_I2C_MAC_OFFSET, buf, 28)) {
+	if (eeprom_read(CONFIG_SYS_I2C_EEPROM_ADDR, CONFIG_SYS_I2C_MAC_OFFSET, buf, 28)) {
 		printf("\nEEPROM @ 0x%02x read FAILED!!!\n",
-		       CFG_I2C_EEPROM_ADDR);
+		       CONFIG_SYS_I2C_EEPROM_ADDR);
 	} else {
 		if (crc32(crc, buf, 24) == *(unsigned int *)&buf[24]) {
 			printf("Reading MAC from EEPROM\n");
diff --git a/board/freescale/mpc832xemds/mpc832xemds.c b/board/freescale/mpc832xemds/mpc832xemds.c
index 4ad6e9d45..d4d447931 100644
--- a/board/freescale/mpc832xemds/mpc832xemds.c
+++ b/board/freescale/mpc832xemds/mpc832xemds.c
@@ -76,7 +76,7 @@ const qe_iop_conf_t qe_iop_conf_tab[] = {
 
 int board_early_init_f(void)
 {
-	volatile u8 *bcsr = (volatile u8 *)CFG_BCSR;
+	volatile u8 *bcsr = (volatile u8 *)CONFIG_SYS_BCSR;
 
 	/* Enable flash write */
 	bcsr[9] &= ~0x08;
@@ -96,14 +96,14 @@ int fixed_sdram(void);
 
 phys_size_t initdram(int board_type)
 {
-	volatile immap_t *im = (immap_t *) CFG_IMMR;
+	volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR;
 	u32 msize = 0;
 
 	if ((im->sysconf.immrbar & IMMRBAR_BASE_ADDR) != (u32) im)
 		return -1;
 
 	/* DDR SDRAM - Main SODIMM */
-	im->sysconf.ddrlaw[0].bar = CFG_DDR_BASE & LAWBAR_BAR;
+	im->sysconf.ddrlaw[0].bar = CONFIG_SYS_DDR_BASE & LAWBAR_BAR;
 
 	msize = fixed_sdram();
 
@@ -116,12 +116,12 @@ phys_size_t initdram(int board_type)
  ************************************************************************/
 int fixed_sdram(void)
 {
-	volatile immap_t *im = (immap_t *) CFG_IMMR;
+	volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR;
 	u32 msize = 0;
 	u32 ddr_size;
 	u32 ddr_size_log2;
 
-	msize = CFG_DDR_SIZE;
+	msize = CONFIG_SYS_DDR_SIZE;
 	for (ddr_size = msize << 20, ddr_size_log2 = 0;
 	     (ddr_size > 1); ddr_size = ddr_size >> 1, ddr_size_log2++) {
 		if (ddr_size & 1) {
@@ -130,21 +130,21 @@ int fixed_sdram(void)
 	}
 	im->sysconf.ddrlaw[0].ar =
 	    LAWAR_EN | ((ddr_size_log2 - 1) & LAWAR_SIZE);
-#if (CFG_DDR_SIZE != 128)
+#if (CONFIG_SYS_DDR_SIZE != 128)
 #warning Currenly any ddr size other than 128 is not supported
 #endif
-	im->ddr.sdram_clk_cntl = CFG_DDR_CLK_CNTL;
-	im->ddr.csbnds[0].csbnds = CFG_DDR_CS0_BNDS;
-	im->ddr.cs_config[0] = CFG_DDR_CS0_CONFIG;
-	im->ddr.timing_cfg_0 = CFG_DDR_TIMING_0;
-	im->ddr.timing_cfg_1 = CFG_DDR_TIMING_1;
-	im->ddr.timing_cfg_2 = CFG_DDR_TIMING_2;
-	im->ddr.timing_cfg_3 = CFG_DDR_TIMING_3;
-	im->ddr.sdram_cfg = CFG_DDR_SDRAM_CFG;
-	im->ddr.sdram_cfg2 = CFG_DDR_SDRAM_CFG2;
-	im->ddr.sdram_mode = CFG_DDR_MODE;
-	im->ddr.sdram_mode2 = CFG_DDR_MODE2;
-	im->ddr.sdram_interval = CFG_DDR_INTERVAL;
+	im->ddr.sdram_clk_cntl = CONFIG_SYS_DDR_CLK_CNTL;
+	im->ddr.csbnds[0].csbnds = CONFIG_SYS_DDR_CS0_BNDS;
+	im->ddr.cs_config[0] = CONFIG_SYS_DDR_CS0_CONFIG;
+	im->ddr.timing_cfg_0 = CONFIG_SYS_DDR_TIMING_0;
+	im->ddr.timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1;
+	im->ddr.timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2;
+	im->ddr.timing_cfg_3 = CONFIG_SYS_DDR_TIMING_3;
+	im->ddr.sdram_cfg = CONFIG_SYS_DDR_SDRAM_CFG;
+	im->ddr.sdram_cfg2 = CONFIG_SYS_DDR_SDRAM_CFG2;
+	im->ddr.sdram_mode = CONFIG_SYS_DDR_MODE;
+	im->ddr.sdram_mode2 = CONFIG_SYS_DDR_MODE2;
+	im->ddr.sdram_interval = CONFIG_SYS_DDR_INTERVAL;
 	__asm__ __volatile__ ("sync");
 	udelay(200);
 
diff --git a/board/freescale/mpc832xemds/pci.c b/board/freescale/mpc832xemds/pci.c
index b0304229d..2a48dd24e 100644
--- a/board/freescale/mpc832xemds/pci.c
+++ b/board/freescale/mpc832xemds/pci.c
@@ -67,7 +67,7 @@ void pci_init_board(void)
 	volatile pcictrl83xx_t *pci_ctrl;
 	volatile pciconf83xx_t *pci_conf;
 
-	immr = (immap_t *) CFG_IMMR;
+	immr = (immap_t *) CONFIG_SYS_IMMR;
 	pci_law = immr->sysconf.pcilaw;
 	pci_pot = immr->ios.pot;
 	pci_ctrl = immr->pci_ctrl;
@@ -93,7 +93,7 @@ void pci_init_board(void)
 	hose[0].first_busno = 0;
 	hose[0].last_busno = 0xff;
 	pci_setup_indirect(&hose[0],
-			   (CFG_IMMR + 0x8300), (CFG_IMMR + 0x8304));
+			   (CONFIG_SYS_IMMR + 0x8300), (CONFIG_SYS_IMMR + 0x8304));
 	reg16 = 0xff;
 
 	pci_hose_read_config_word(&hose[0], PCI_BDF(0, 0, 0),
@@ -134,7 +134,7 @@ void pci_init_board(void)
 	u32 val32;
 	u32 dev;
 
-	immr = (immap_t *) CFG_IMMR;
+	immr = (immap_t *) CONFIG_SYS_IMMR;
 	clk = (clk83xx_t *) & immr->clk;
 	pci_law = immr->sysconf.pcilaw;
 	pci_pot = immr->ios.pot;
@@ -161,10 +161,10 @@ void pci_init_board(void)
 	/*
 	 * Configure PCI Local Access Windows
 	 */
-	pci_law[0].bar = CFG_PCI_MEM_PHYS & LAWBAR_BAR;
+	pci_law[0].bar = CONFIG_SYS_PCI_MEM_PHYS & LAWBAR_BAR;
 	pci_law[0].ar = LAWAR_EN | LAWAR_SIZE_512M;
 
-	pci_law[1].bar = CFG_PCI_IO_PHYS & LAWBAR_BAR;
+	pci_law[1].bar = CONFIG_SYS_PCI_IO_PHYS & LAWBAR_BAR;
 	pci_law[1].ar = LAWAR_EN | LAWAR_SIZE_1M;
 
 	/*
@@ -172,26 +172,26 @@ void pci_init_board(void)
 	 */
 
 	/* PCI mem space - prefetch */
-	pci_pot[0].potar = (CFG_PCI_MEM_BASE >> 12) & POTAR_TA_MASK;
-	pci_pot[0].pobar = (CFG_PCI_MEM_PHYS >> 12) & POBAR_BA_MASK;
+	pci_pot[0].potar = (CONFIG_SYS_PCI_MEM_BASE >> 12) & POTAR_TA_MASK;
+	pci_pot[0].pobar = (CONFIG_SYS_PCI_MEM_PHYS >> 12) & POBAR_BA_MASK;
 	pci_pot[0].pocmr =
 	    POCMR_EN | POCMR_SE | (POCMR_CM_256M & POCMR_CM_MASK);
 
 	/* PCI mmio - non-prefetch mem space */
-	pci_pot[1].potar = (CFG_PCI_MMIO_BASE >> 12) & POTAR_TA_MASK;
-	pci_pot[1].pobar = (CFG_PCI_MMIO_PHYS >> 12) & POBAR_BA_MASK;
+	pci_pot[1].potar = (CONFIG_SYS_PCI_MMIO_BASE >> 12) & POTAR_TA_MASK;
+	pci_pot[1].pobar = (CONFIG_SYS_PCI_MMIO_PHYS >> 12) & POBAR_BA_MASK;
 	pci_pot[1].pocmr = POCMR_EN | (POCMR_CM_256M & POCMR_CM_MASK);
 
 	/* PCI IO space */
-	pci_pot[2].potar = (CFG_PCI_IO_BASE >> 12) & POTAR_TA_MASK;
-	pci_pot[2].pobar = (CFG_PCI_IO_PHYS >> 12) & POBAR_BA_MASK;
+	pci_pot[2].potar = (CONFIG_SYS_PCI_IO_BASE >> 12) & POTAR_TA_MASK;
+	pci_pot[2].pobar = (CONFIG_SYS_PCI_IO_PHYS >> 12) & POBAR_BA_MASK;
 	pci_pot[2].pocmr = POCMR_EN | POCMR_IO | (POCMR_CM_1M & POCMR_CM_MASK);
 
 	/*
 	 * Configure PCI Inbound Translation Windows
 	 */
-	pci_ctrl[0].pitar1 = (CFG_PCI_SLV_MEM_LOCAL >> 12) & PITAR_TA_MASK;
-	pci_ctrl[0].pibar1 = (CFG_PCI_SLV_MEM_BUS >> 12) & PIBAR_MASK;
+	pci_ctrl[0].pitar1 = (CONFIG_SYS_PCI_SLV_MEM_LOCAL >> 12) & PITAR_TA_MASK;
+	pci_ctrl[0].pibar1 = (CONFIG_SYS_PCI_SLV_MEM_BUS >> 12) & PIBAR_MASK;
 	pci_ctrl[0].piebar1 = 0x0;
 	pci_ctrl[0].piwar1 =
 	    PIWAR_EN | PIWAR_PF | PIWAR_RTT_SNOOP | PIWAR_WTT_SNOOP |
@@ -209,31 +209,31 @@ void pci_init_board(void)
 
 	/* PCI memory prefetch space */
 	pci_set_region(hose[0].regions + 0,
-		       CFG_PCI_MEM_BASE,
-		       CFG_PCI_MEM_PHYS,
-		       CFG_PCI_MEM_SIZE, PCI_REGION_MEM | PCI_REGION_PREFETCH);
+		       CONFIG_SYS_PCI_MEM_BASE,
+		       CONFIG_SYS_PCI_MEM_PHYS,
+		       CONFIG_SYS_PCI_MEM_SIZE, PCI_REGION_MEM | PCI_REGION_PREFETCH);
 
 	/* PCI memory space */
 	pci_set_region(hose[0].regions + 1,
-		       CFG_PCI_MMIO_BASE,
-		       CFG_PCI_MMIO_PHYS, CFG_PCI_MMIO_SIZE, PCI_REGION_MEM);
+		       CONFIG_SYS_PCI_MMIO_BASE,
+		       CONFIG_SYS_PCI_MMIO_PHYS, CONFIG_SYS_PCI_MMIO_SIZE, PCI_REGION_MEM);
 
 	/* PCI IO space */
 	pci_set_region(hose[0].regions + 2,
-		       CFG_PCI_IO_BASE,
-		       CFG_PCI_IO_PHYS, CFG_PCI_IO_SIZE, PCI_REGION_IO);
+		       CONFIG_SYS_PCI_IO_BASE,
+		       CONFIG_SYS_PCI_IO_PHYS, CONFIG_SYS_PCI_IO_SIZE, PCI_REGION_IO);
 
 	/* System memory space */
 	pci_set_region(hose[0].regions + 3,
-		       CFG_PCI_SLV_MEM_LOCAL,
-		       CFG_PCI_SLV_MEM_BUS,
-		       CFG_PCI_SLV_MEM_SIZE,
+		       CONFIG_SYS_PCI_SLV_MEM_LOCAL,
+		       CONFIG_SYS_PCI_SLV_MEM_BUS,
+		       CONFIG_SYS_PCI_SLV_MEM_SIZE,
 		       PCI_REGION_MEM | PCI_REGION_MEMORY);
 
 	hose[0].region_count = 4;
 
 	pci_setup_indirect(&hose[0],
-			   (CFG_IMMR + 0x8300), (CFG_IMMR + 0x8304));
+			   (CONFIG_SYS_IMMR + 0x8300), (CONFIG_SYS_IMMR + 0x8304));
 
 	pci_register_hose(hose);
 
diff --git a/board/freescale/mpc8349emds/mpc8349emds.c b/board/freescale/mpc8349emds/mpc8349emds.c
index 4c04f2c4d..06064d970 100644
--- a/board/freescale/mpc8349emds/mpc8349emds.c
+++ b/board/freescale/mpc8349emds/mpc8349emds.c
@@ -44,12 +44,12 @@ void ddr_enable_ecc(unsigned int dram_size);
 
 int board_early_init_f (void)
 {
-	volatile u8* bcsr = (volatile u8*)CFG_BCSR;
+	volatile u8* bcsr = (volatile u8*)CONFIG_SYS_BCSR;
 
 	/* Enable flash write */
 	bcsr[1] &= ~0x01;
 
-#ifdef CFG_USE_MPC834XSYS_USB_PHY
+#ifdef CONFIG_SYS_USE_MPC834XSYS_USB_PHY
 	/* Use USB PHY on SYS board */
 	bcsr[5] |= 0x02;
 #endif
@@ -61,14 +61,14 @@ int board_early_init_f (void)
 
 phys_size_t initdram (int board_type)
 {
-	volatile immap_t *im = (immap_t *)CFG_IMMR;
+	volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
 	u32 msize = 0;
 
 	if ((im->sysconf.immrbar & IMMRBAR_BASE_ADDR) != (u32)im)
 		return -1;
 
 	/* DDR SDRAM - Main SODIMM */
-	im->sysconf.ddrlaw[0].bar = CFG_DDR_BASE & LAWBAR_BAR;
+	im->sysconf.ddrlaw[0].bar = CONFIG_SYS_DDR_BASE & LAWBAR_BAR;
 #if defined(CONFIG_SPD_EEPROM)
 	msize = spd_sdram();
 #else
@@ -96,12 +96,12 @@ phys_size_t initdram (int board_type)
  ************************************************************************/
 int fixed_sdram(void)
 {
-	volatile immap_t *im = (immap_t *)CFG_IMMR;
+	volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
 	u32 msize = 0;
 	u32 ddr_size;
 	u32 ddr_size_log2;
 
-	msize = CFG_DDR_SIZE;
+	msize = CONFIG_SYS_DDR_SIZE;
 	for (ddr_size = msize << 20, ddr_size_log2 = 0;
 	     (ddr_size > 1);
 	     ddr_size = ddr_size>>1, ddr_size_log2++) {
@@ -109,36 +109,36 @@ int fixed_sdram(void)
 			return -1;
 		}
 	}
-	im->sysconf.ddrlaw[0].bar = ((CFG_DDR_SDRAM_BASE>>12) & 0xfffff);
+	im->sysconf.ddrlaw[0].bar = CONFIG_SYS_DDR_SDRAM_BASE & 0xfffff000;
 	im->sysconf.ddrlaw[0].ar = LAWAR_EN | ((ddr_size_log2 - 1) & LAWAR_SIZE);
 
-#if (CFG_DDR_SIZE != 256)
+#if (CONFIG_SYS_DDR_SIZE != 256)
 #warning Currenly any ddr size other than 256 is not supported
 #endif
 #ifdef CONFIG_DDR_II
-	im->ddr.csbnds[2].csbnds = CFG_DDR_CS2_BNDS;
-	im->ddr.cs_config[2] = CFG_DDR_CS2_CONFIG;
-	im->ddr.timing_cfg_0 = CFG_DDR_TIMING_0;
-	im->ddr.timing_cfg_1 = CFG_DDR_TIMING_1;
-	im->ddr.timing_cfg_2 = CFG_DDR_TIMING_2;
-	im->ddr.timing_cfg_3 = CFG_DDR_TIMING_3;
-	im->ddr.sdram_cfg = CFG_DDR_SDRAM_CFG;
-	im->ddr.sdram_cfg2 = CFG_DDR_SDRAM_CFG2;
-	im->ddr.sdram_mode = CFG_DDR_MODE;
-	im->ddr.sdram_mode2 = CFG_DDR_MODE2;
-	im->ddr.sdram_interval = CFG_DDR_INTERVAL;
-	im->ddr.sdram_clk_cntl = CFG_DDR_CLK_CNTL;
+	im->ddr.csbnds[2].csbnds = CONFIG_SYS_DDR_CS2_BNDS;
+	im->ddr.cs_config[2] = CONFIG_SYS_DDR_CS2_CONFIG;
+	im->ddr.timing_cfg_0 = CONFIG_SYS_DDR_TIMING_0;
+	im->ddr.timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1;
+	im->ddr.timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2;
+	im->ddr.timing_cfg_3 = CONFIG_SYS_DDR_TIMING_3;
+	im->ddr.sdram_cfg = CONFIG_SYS_DDR_SDRAM_CFG;
+	im->ddr.sdram_cfg2 = CONFIG_SYS_DDR_SDRAM_CFG2;
+	im->ddr.sdram_mode = CONFIG_SYS_DDR_MODE;
+	im->ddr.sdram_mode2 = CONFIG_SYS_DDR_MODE2;
+	im->ddr.sdram_interval = CONFIG_SYS_DDR_INTERVAL;
+	im->ddr.sdram_clk_cntl = CONFIG_SYS_DDR_CLK_CNTL;
 #else
 	im->ddr.csbnds[2].csbnds = 0x0000000f;
-	im->ddr.cs_config[2] = CFG_DDR_CONFIG;
+	im->ddr.cs_config[2] = CONFIG_SYS_DDR_CONFIG;
 
 	/* currently we use only one CS, so disable the other banks */
 	im->ddr.cs_config[0] = 0;
 	im->ddr.cs_config[1] = 0;
 	im->ddr.cs_config[3] = 0;
 
-	im->ddr.timing_cfg_1 = CFG_DDR_TIMING_1;
-	im->ddr.timing_cfg_2 = CFG_DDR_TIMING_2;
+	im->ddr.timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1;
+	im->ddr.timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2;
 
 	im->ddr.sdram_cfg =
 		SDRAM_CFG_SREN
@@ -150,9 +150,9 @@ int fixed_sdram(void)
 	/* for 32-bit mode burst length is 8 */
 	im->ddr.sdram_cfg |= (SDRAM_CFG_32_BE | SDRAM_CFG_8_BE);
 #endif
-	im->ddr.sdram_mode = CFG_DDR_MODE;
+	im->ddr.sdram_mode = CONFIG_SYS_DDR_MODE;
 
-	im->ddr.sdram_interval = CFG_DDR_INTERVAL;
+	im->ddr.sdram_interval = CONFIG_SYS_DDR_INTERVAL;
 #endif
 	udelay(200);
 
@@ -160,7 +160,7 @@ int fixed_sdram(void)
 	im->ddr.sdram_cfg |= SDRAM_CFG_MEM_EN;
 	return msize;
 }
-#endif/*!CFG_SPD_EEPROM*/
+#endif/*!CONFIG_SYS_SPD_EEPROM*/
 
 
 int checkboard (void)
@@ -181,41 +181,41 @@ int checkboard (void)
 /*
  * if MPC8349EMDS is soldered with SDRAM
  */
-#if defined(CFG_BR2_PRELIM)  \
-	&& defined(CFG_OR2_PRELIM) \
-	&& defined(CFG_LBLAWBAR2_PRELIM) \
-	&& defined(CFG_LBLAWAR2_PRELIM)
+#if defined(CONFIG_SYS_BR2_PRELIM)  \
+	&& defined(CONFIG_SYS_OR2_PRELIM) \
+	&& defined(CONFIG_SYS_LBLAWBAR2_PRELIM) \
+	&& defined(CONFIG_SYS_LBLAWAR2_PRELIM)
 /*
  * Initialize SDRAM memory on the Local Bus.
  */
 
 void sdram_init(void)
 {
-	volatile immap_t *immap = (immap_t *)CFG_IMMR;
-	volatile lbus83xx_t *lbc= &immap->lbus;
-	uint *sdram_addr = (uint *)CFG_LBC_SDRAM_BASE;
+	volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR;
+	volatile fsl_lbus_t *lbc = &immap->lbus;
+	uint *sdram_addr = (uint *)CONFIG_SYS_LBC_SDRAM_BASE;
 
 	/*
 	 * Setup SDRAM Base and Option Registers, already done in cpu_init.c
 	 */
 
 	/* setup mtrpt, lsrt and lbcr for LB bus */
-	lbc->lbcr = CFG_LBC_LBCR;
-	lbc->mrtpr = CFG_LBC_MRTPR;
-	lbc->lsrt = CFG_LBC_LSRT;
+	lbc->lbcr = CONFIG_SYS_LBC_LBCR;
+	lbc->mrtpr = CONFIG_SYS_LBC_MRTPR;
+	lbc->lsrt = CONFIG_SYS_LBC_LSRT;
 	asm("sync");
 
 	/*
 	 * Configure the SDRAM controller Machine Mode Register.
 	 */
-	lbc->lsdmr = CFG_LBC_LSDMR_5; /* 0x40636733; normal operation */
+	lbc->lsdmr = CONFIG_SYS_LBC_LSDMR_5; /* 0x40636733; normal operation */
 
-	lbc->lsdmr = CFG_LBC_LSDMR_1; /* 0x68636733; precharge all the banks */
+	lbc->lsdmr = CONFIG_SYS_LBC_LSDMR_1; /* 0x68636733; precharge all the banks */
 	asm("sync");
 	*sdram_addr = 0xff;
 	udelay(100);
 
-	lbc->lsdmr = CFG_LBC_LSDMR_2; /* 0x48636733; auto refresh */
+	lbc->lsdmr = CONFIG_SYS_LBC_LSDMR_2; /* 0x48636733; auto refresh */
 	asm("sync");
 	/*1 times*/
 	*sdram_addr = 0xff;
@@ -243,12 +243,12 @@ void sdram_init(void)
 	udelay(100);
 
 	/* 0x58636733; mode register write operation */
-	lbc->lsdmr = CFG_LBC_LSDMR_4;
+	lbc->lsdmr = CONFIG_SYS_LBC_LSDMR_4;
 	asm("sync");
 	*sdram_addr = 0xff;
 	udelay(100);
 
-	lbc->lsdmr = CFG_LBC_LSDMR_5; /* 0x40636733; normal operation */
+	lbc->lsdmr = CONFIG_SYS_LBC_LSDMR_5; /* 0x40636733; normal operation */
 	asm("sync");
 	*sdram_addr = 0xff;
 	udelay(100);
@@ -273,14 +273,14 @@ int spi_cs_is_valid(unsigned int bus, unsigned int cs)
 
 void spi_cs_activate(struct spi_slave *slave)
 {
-	volatile gpio83xx_t *iopd = &((immap_t *)CFG_IMMR)->gpio[0];
+	volatile gpio83xx_t *iopd = &((immap_t *)CONFIG_SYS_IMMR)->gpio[0];
 
 	iopd->dat &= ~SPI_CS_MASK;
 }
 
 void spi_cs_deactivate(struct spi_slave *slave)
 {
-	volatile gpio83xx_t *iopd = &((immap_t *)CFG_IMMR)->gpio[0];
+	volatile gpio83xx_t *iopd = &((immap_t *)CONFIG_SYS_IMMR)->gpio[0];
 
 	iopd->dat |=  SPI_CS_MASK;
 }
diff --git a/board/freescale/mpc8349emds/pci.c b/board/freescale/mpc8349emds/pci.c
index 9c19e303f..ad7bf5d50 100644
--- a/board/freescale/mpc8349emds/pci.c
+++ b/board/freescale/mpc8349emds/pci.c
@@ -33,21 +33,21 @@ DECLARE_GLOBAL_DATA_PTR;
 
 static struct pci_region pci1_regions[] = {
 	{
-		bus_start: CFG_PCI1_MEM_BASE,
-		phys_start: CFG_PCI1_MEM_PHYS,
-		size: CFG_PCI1_MEM_SIZE,
+		bus_start: CONFIG_SYS_PCI1_MEM_BASE,
+		phys_start: CONFIG_SYS_PCI1_MEM_PHYS,
+		size: CONFIG_SYS_PCI1_MEM_SIZE,
 		flags: PCI_REGION_MEM | PCI_REGION_PREFETCH
 	},
 	{
-		bus_start: CFG_PCI1_IO_BASE,
-		phys_start: CFG_PCI1_IO_PHYS,
-		size: CFG_PCI1_IO_SIZE,
+		bus_start: CONFIG_SYS_PCI1_IO_BASE,
+		phys_start: CONFIG_SYS_PCI1_IO_PHYS,
+		size: CONFIG_SYS_PCI1_IO_SIZE,
 		flags: PCI_REGION_IO
 	},
 	{
-		bus_start: CFG_PCI1_MMIO_BASE,
-		phys_start: CFG_PCI1_MMIO_PHYS,
-		size: CFG_PCI1_MMIO_SIZE,
+		bus_start: CONFIG_SYS_PCI1_MMIO_BASE,
+		phys_start: CONFIG_SYS_PCI1_MMIO_PHYS,
+		size: CONFIG_SYS_PCI1_MMIO_SIZE,
 		flags: PCI_REGION_MEM
 	},
 };
@@ -55,21 +55,21 @@ static struct pci_region pci1_regions[] = {
 #ifdef CONFIG_MPC83XX_PCI2
 static struct pci_region pci2_regions[] = {
 	{
-		bus_start: CFG_PCI2_MEM_BASE,
-		phys_start: CFG_PCI2_MEM_PHYS,
-		size: CFG_PCI2_MEM_SIZE,
+		bus_start: CONFIG_SYS_PCI2_MEM_BASE,
+		phys_start: CONFIG_SYS_PCI2_MEM_PHYS,
+		size: CONFIG_SYS_PCI2_MEM_SIZE,
 		flags: PCI_REGION_MEM | PCI_REGION_PREFETCH
 	},
 	{
-		bus_start: CFG_PCI2_IO_BASE,
-		phys_start: CFG_PCI2_IO_PHYS,
-		size: CFG_PCI2_IO_SIZE,
+		bus_start: CONFIG_SYS_PCI2_IO_BASE,
+		phys_start: CONFIG_SYS_PCI2_IO_PHYS,
+		size: CONFIG_SYS_PCI2_IO_SIZE,
 		flags: PCI_REGION_IO
 	},
 	{
-		bus_start: CFG_PCI2_MMIO_BASE,
-		phys_start: CFG_PCI2_MMIO_PHYS,
-		size: CFG_PCI2_MMIO_SIZE,
+		bus_start: CONFIG_SYS_PCI2_MMIO_BASE,
+		phys_start: CONFIG_SYS_PCI2_MMIO_PHYS,
+		size: CONFIG_SYS_PCI2_MMIO_SIZE,
 		flags: PCI_REGION_MEM
 	},
 };
@@ -135,7 +135,7 @@ void pib_init(void)
 
 void pci_init_board(void)
 {
-	volatile immap_t *immr = (volatile immap_t *)CFG_IMMR;
+	volatile immap_t *immr = (volatile immap_t *)CONFIG_SYS_IMMR;
 	volatile clk83xx_t *clk = (volatile clk83xx_t *)&immr->clk;
 	volatile law83xx_t *pci_law = immr->sysconf.pcilaw;
 #ifndef CONFIG_MPC83XX_PCI2
@@ -152,10 +152,10 @@ void pci_init_board(void)
 	udelay(2000);
 
 	/* Configure PCI Local Access Windows */
-	pci_law[0].bar = CFG_PCI1_MEM_PHYS & LAWBAR_BAR;
+	pci_law[0].bar = CONFIG_SYS_PCI1_MEM_PHYS & LAWBAR_BAR;
 	pci_law[0].ar = LAWAR_EN | LAWAR_SIZE_1G;
 
-	pci_law[1].bar = CFG_PCI1_IO_PHYS & LAWBAR_BAR;
+	pci_law[1].bar = CONFIG_SYS_PCI1_IO_PHYS & LAWBAR_BAR;
 	pci_law[1].ar = LAWAR_EN | LAWAR_SIZE_4M;
 
 	udelay(2000);
@@ -170,7 +170,7 @@ void pci_init_board(void)
 #else
 void pci_init_board(void)
 {
-	volatile immap_t *immr = (volatile immap_t *)CFG_IMMR;
+	volatile immap_t *immr = (volatile immap_t *)CONFIG_SYS_IMMR;
 	volatile clk83xx_t *clk = (volatile clk83xx_t *)&immr->clk;
 	volatile law83xx_t *pci_law = immr->sysconf.pcilaw;
 	volatile pcictrl83xx_t *pci_ctrl = &immr->pci_ctrl[0];
@@ -181,10 +181,10 @@ void pci_init_board(void)
 	udelay(2000);
 
 	/* Configure PCI Local Access Windows */
-	pci_law[0].bar = CFG_PCI1_MEM_PHYS & LAWBAR_BAR;
+	pci_law[0].bar = CONFIG_SYS_PCI1_MEM_PHYS & LAWBAR_BAR;
 	pci_law[0].ar = LAWAR_EN | LAWAR_SIZE_1G;
 
-	pci_law[1].bar = CFG_PCI1_IO_PHYS & LAWBAR_BAR;
+	pci_law[1].bar = CONFIG_SYS_PCI1_IO_PHYS & LAWBAR_BAR;
 	pci_law[1].ar = LAWAR_EN | LAWAR_SIZE_4M;
 
 	udelay(2000);
diff --git a/board/freescale/mpc8349itx/mpc8349itx.c b/board/freescale/mpc8349itx/mpc8349itx.c
index d3fc560df..35285b4c9 100644
--- a/board/freescale/mpc8349itx/mpc8349itx.c
+++ b/board/freescale/mpc8349itx/mpc8349itx.c
@@ -42,11 +42,11 @@
  ************************************************************************/
 int fixed_sdram(void)
 {
-	volatile immap_t *im = (immap_t *) CFG_IMMR;
+	volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR;
 	u32 ddr_size;		/* The size of RAM, in bytes */
 	u32 ddr_size_log2 = 0;
 
-	for (ddr_size = CFG_DDR_SIZE * 0x100000; ddr_size > 1; ddr_size >>= 1) {
+	for (ddr_size = CONFIG_SYS_DDR_SIZE * 0x100000; ddr_size > 1; ddr_size >>= 1) {
 		if (ddr_size & 1) {
 			return -1;
 		}
@@ -55,11 +55,11 @@ int fixed_sdram(void)
 
 	im->sysconf.ddrlaw[0].ar =
 	    LAWAR_EN | ((ddr_size_log2 - 1) & LAWAR_SIZE);
-	im->sysconf.ddrlaw[0].bar = (CFG_DDR_SDRAM_BASE >> 12) & 0xfffff;
+	im->sysconf.ddrlaw[0].bar = CONFIG_SYS_DDR_SDRAM_BASE & 0xfffff000;
 
 	/* Only one CS0 for DDR */
 	im->ddr.csbnds[0].csbnds = 0x0000000f;
-	im->ddr.cs_config[0] = CFG_DDR_CONFIG;
+	im->ddr.cs_config[0] = CONFIG_SYS_DDR_CONFIG;
 
 	debug("cs0_bnds = 0x%08x\n", im->ddr.csbnds[0].csbnds);
 	debug("cs0_config = 0x%08x\n", im->ddr.cs_config[0]);
@@ -67,15 +67,15 @@ int fixed_sdram(void)
 	debug("DDR:bar=0x%08x\n", im->sysconf.ddrlaw[0].bar);
 	debug("DDR:ar=0x%08x\n", im->sysconf.ddrlaw[0].ar);
 
-	im->ddr.timing_cfg_1 = CFG_DDR_TIMING_1;
-	im->ddr.timing_cfg_2 = CFG_DDR_TIMING_2;/* Was "2 << TIMING_CFG2_WR_DATA_DELAY_SHIFT" */
+	im->ddr.timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1;
+	im->ddr.timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2;/* Was "2 << TIMING_CFG2_WR_DATA_DELAY_SHIFT" */
 	im->ddr.sdram_cfg = SDRAM_CFG_SREN | SDRAM_CFG_SDRAM_TYPE_DDR1;
 	im->ddr.sdram_mode =
 	    (0x0000 << SDRAM_MODE_ESD_SHIFT) | (0x0032 << SDRAM_MODE_SD_SHIFT);
 	im->ddr.sdram_interval =
 	    (0x0410 << SDRAM_INTERVAL_REFINT_SHIFT) | (0x0100 <<
 						       SDRAM_INTERVAL_BSTOPRE_SHIFT);
-	im->ddr.sdram_clk_cntl = CFG_DDR_SDRAM_CLK_CNTL;
+	im->ddr.sdram_clk_cntl = CONFIG_SYS_DDR_SDRAM_CLK_CNTL;
 
 	udelay(200);
 
@@ -87,7 +87,7 @@ int fixed_sdram(void)
 	debug("DDR:sdram_interval=0x%08x\n", im->ddr.sdram_interval);
 	debug("DDR:sdram_cfg=0x%08x\n", im->ddr.sdram_cfg);
 
-	return CFG_DDR_SIZE;
+	return CONFIG_SYS_DDR_SIZE;
 }
 #endif
 
@@ -130,7 +130,7 @@ volatile static struct pci_controller hose[] = {
 
 phys_size_t initdram(int board_type)
 {
-	volatile immap_t *im = (immap_t *) CFG_IMMR;
+	volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR;
 	u32 msize = 0;
 #ifdef CONFIG_DDR_ECC
 	volatile ddr83xx_t *ddr = &im->ddr;
@@ -140,7 +140,7 @@ phys_size_t initdram(int board_type)
 		return -1;
 
 	/* DDR SDRAM - Main SODIMM */
-	im->sysconf.ddrlaw[0].bar = CFG_DDR_BASE & LAWBAR_BAR;
+	im->sysconf.ddrlaw[0].bar = CONFIG_SYS_DDR_BASE & LAWBAR_BAR;
 #ifdef CONFIG_SPD_EEPROM
 	msize = spd_sdram();
 #else
@@ -196,7 +196,7 @@ int misc_init_f(void)
 	   don't enable compact flash for U-Boot.
 	 */
 
-	vsc7385_cpuctrl = (volatile u32 *)(CFG_VSC7385_BASE + 0x1c0c0);
+	vsc7385_cpuctrl = (volatile u32 *)(CONFIG_SYS_VSC7385_BASE + 0x1c0c0);
 	*vsc7385_cpuctrl |= 0x0c;
 #endif
 
@@ -220,11 +220,11 @@ int misc_init_f(void)
 		0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
 		0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01
 	};
-	volatile immap_t *immap = (immap_t *) CFG_IMMR;
-	volatile lbus83xx_t *lbus = &immap->lbus;
+	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
+	volatile fsl_lbus_t *lbus = &immap->lbus;
 
-	lbus->bank[3].br = CFG_BR3_PRELIM;
-	lbus->bank[3].or = CFG_OR3_PRELIM;
+	lbus->bank[3].br = CONFIG_SYS_BR3_PRELIM;
+	lbus->bank[3].or = CONFIG_SYS_OR3_PRELIM;
 
 	/* Program the MAMR. RFEN=0, OP=00, UWPL=1, AM=000, DS=01, G0CL=000,
 	   GPL4=0, RLF=0001, WLF=0001, TLF=0001, MAD=000000
@@ -265,26 +265,26 @@ int misc_init_r(void)
 	unsigned int orig_bus = i2c_get_bus_num();
 	u8 i2c_data;
 
-#ifdef CFG_I2C_RTC_ADDR
+#ifdef CONFIG_SYS_I2C_RTC_ADDR
 	u8 ds1339_data[17];
 #endif
 
-#ifdef CFG_I2C_EEPROM_ADDR
+#ifdef CONFIG_SYS_I2C_EEPROM_ADDR
 	static u8 eeprom_data[] =	/* HRCW data */
 	{
 		0xAA, 0x55, 0xAA,       /* Preamble */
 		0x7C,		        /* ACS=0, BYTE_EN=1111, CONT=1 */
 		0x02, 0x40,	        /* RCWL ADDR=0x0_0900 */
-		(CFG_HRCW_LOW >> 24) & 0xFF,
-		(CFG_HRCW_LOW >> 16) & 0xFF,
-		(CFG_HRCW_LOW >> 8) & 0xFF,
-		CFG_HRCW_LOW & 0xFF,
+		(CONFIG_SYS_HRCW_LOW >> 24) & 0xFF,
+		(CONFIG_SYS_HRCW_LOW >> 16) & 0xFF,
+		(CONFIG_SYS_HRCW_LOW >> 8) & 0xFF,
+		CONFIG_SYS_HRCW_LOW & 0xFF,
 		0x7C,		        /* ACS=0, BYTE_EN=1111, CONT=1 */
 		0x02, 0x41,	        /* RCWH ADDR=0x0_0904 */
-		(CFG_HRCW_HIGH >> 24) & 0xFF,
-		(CFG_HRCW_HIGH >> 16) & 0xFF,
-		(CFG_HRCW_HIGH >> 8) & 0xFF,
-		CFG_HRCW_HIGH & 0xFF
+		(CONFIG_SYS_HRCW_HIGH >> 24) & 0xFF,
+		(CONFIG_SYS_HRCW_HIGH >> 16) & 0xFF,
+		(CONFIG_SYS_HRCW_HIGH >> 8) & 0xFF,
+		CONFIG_SYS_HRCW_HIGH & 0xFF
 	};
 
 	u8 data[sizeof(eeprom_data)];
@@ -292,22 +292,22 @@ int misc_init_r(void)
 
 	printf("Board revision: ");
 	i2c_set_bus_num(1);
-	if (i2c_read(CFG_I2C_8574A_ADDR2, 0, 0, &i2c_data, sizeof(i2c_data)) == 0)
+	if (i2c_read(CONFIG_SYS_I2C_8574A_ADDR2, 0, 0, &i2c_data, sizeof(i2c_data)) == 0)
 		printf("%u.%u (PCF8475A)\n", (i2c_data & 0x02) >> 1, i2c_data & 0x01);
-	else if (i2c_read(CFG_I2C_8574_ADDR2, 0, 0, &i2c_data, sizeof(i2c_data)) == 0)
+	else if (i2c_read(CONFIG_SYS_I2C_8574_ADDR2, 0, 0, &i2c_data, sizeof(i2c_data)) == 0)
 		printf("%u.%u (PCF8475)\n",  (i2c_data & 0x02) >> 1, i2c_data & 0x01);
 	else {
 		printf("Unknown\n");
 		rc = 1;
 	}
 
-#ifdef CFG_I2C_EEPROM_ADDR
+#ifdef CONFIG_SYS_I2C_EEPROM_ADDR
 	i2c_set_bus_num(0);
 
-	if (i2c_read(CFG_I2C_EEPROM_ADDR, 0, 2, data, sizeof(data)) == 0) {
+	if (i2c_read(CONFIG_SYS_I2C_EEPROM_ADDR, 0, 2, data, sizeof(data)) == 0) {
 		if (memcmp(data, eeprom_data, sizeof(data)) != 0) {
 			if (i2c_write
-			    (CFG_I2C_EEPROM_ADDR, 0, 2, eeprom_data,
+			    (CONFIG_SYS_I2C_EEPROM_ADDR, 0, 2, eeprom_data,
 			     sizeof(eeprom_data)) != 0) {
 				puts("Failure writing the HRCW to EEPROM via I2C.\n");
 				rc = 1;
@@ -319,10 +319,10 @@ int misc_init_r(void)
 	}
 #endif
 
-#ifdef CFG_I2C_RTC_ADDR
+#ifdef CONFIG_SYS_I2C_RTC_ADDR
 	i2c_set_bus_num(1);
 
-	if (i2c_read(CFG_I2C_RTC_ADDR, 0, 1, ds1339_data, sizeof(ds1339_data))
+	if (i2c_read(CONFIG_SYS_I2C_RTC_ADDR, 0, 1, ds1339_data, sizeof(ds1339_data))
 	    == 0) {
 
 		/* Work-around for MPC8349E-mITX bug #13601.
@@ -366,7 +366,7 @@ int misc_init_r(void)
 		 */
 
 		if (i2c_write
-		    (CFG_I2C_RTC_ADDR, 0, 1, ds1339_data,
+		    (CONFIG_SYS_I2C_RTC_ADDR, 0, 1, ds1339_data,
 		     sizeof(ds1339_data))) {
 			puts("Failure writing to the RTC via I2C.\n");
 			rc = 1;
diff --git a/board/freescale/mpc8349itx/pci.c b/board/freescale/mpc8349itx/pci.c
index d33edf367..fd2c172de 100644
--- a/board/freescale/mpc8349itx/pci.c
+++ b/board/freescale/mpc8349itx/pci.c
@@ -37,8 +37,8 @@
 DECLARE_GLOBAL_DATA_PTR;
 
 /* System RAM mapped to PCI space */
-#define CONFIG_PCI_SYS_MEM_BUS	CFG_SDRAM_BASE
-#define CONFIG_PCI_SYS_MEM_PHYS	CFG_SDRAM_BASE
+#define CONFIG_PCI_SYS_MEM_BUS	CONFIG_SYS_SDRAM_BASE
+#define CONFIG_PCI_SYS_MEM_PHYS	CONFIG_SYS_SDRAM_BASE
 
 #ifndef CONFIG_PCI_PNP
 static struct pci_config_table pci_mpc8349itx_config_table[] = {
@@ -92,7 +92,7 @@ void pci_init_board(void)
 	u32 dev;
 	struct pci_controller *hose;
 
-	immr = (immap_t *) CFG_IMMR;
+	immr = (immap_t *) CONFIG_SYS_IMMR;
 	clk = (clk83xx_t *) & immr->clk;
 	pci_law = immr->sysconf.pcilaw;
 	pci_pot = immr->ios.pot;
@@ -111,8 +111,8 @@ void pci_init_board(void)
 #ifdef CONFIG_HARD_I2C
 	i2c_set_bus_num(1);
 	/* Read the PCI_M66EN jumper setting */
-	if ((i2c_read(CFG_I2C_8574_ADDR2, 0, 0, &reg8, sizeof(reg8)) == 0) ||
-	    (i2c_read(CFG_I2C_8574A_ADDR2, 0, 0, &reg8, sizeof(reg8)) == 0)) {
+	if ((i2c_read(CONFIG_SYS_I2C_8574_ADDR2, 0, 0, &reg8, sizeof(reg8)) == 0) ||
+	    (i2c_read(CONFIG_SYS_I2C_8574A_ADDR2, 0, 0, &reg8, sizeof(reg8)) == 0)) {
 		if (reg8 & I2C_8574_PCI66)
 			clk->occr = 0xff000000;	/* 66 MHz PCI */
 		else
@@ -150,10 +150,10 @@ void pci_init_board(void)
 	/*
 	 * Configure PCI Local Access Windows
 	 */
-	pci_law[0].bar = CFG_PCI1_MEM_PHYS & LAWBAR_BAR;
+	pci_law[0].bar = CONFIG_SYS_PCI1_MEM_PHYS & LAWBAR_BAR;
 	pci_law[0].ar = LAWAR_EN | LAWAR_SIZE_1G;
 
-	pci_law[1].bar = CFG_PCI1_IO_PHYS & LAWBAR_BAR;
+	pci_law[1].bar = CONFIG_SYS_PCI1_IO_PHYS & LAWBAR_BAR;
 	pci_law[1].ar = LAWAR_EN | LAWAR_SIZE_32M;
 
 	/*
@@ -161,18 +161,18 @@ void pci_init_board(void)
 	 */
 
 	/* PCI1 mem space - prefetch */
-	pci_pot[0].potar = (CFG_PCI1_MEM_BASE >> 12) & POTAR_TA_MASK;
-	pci_pot[0].pobar = (CFG_PCI1_MEM_PHYS >> 12) & POBAR_BA_MASK;
+	pci_pot[0].potar = (CONFIG_SYS_PCI1_MEM_BASE >> 12) & POTAR_TA_MASK;
+	pci_pot[0].pobar = (CONFIG_SYS_PCI1_MEM_PHYS >> 12) & POBAR_BA_MASK;
 	pci_pot[0].pocmr = POCMR_EN | POCMR_PREFETCH_EN | POCMR_CM_256M;
 
 	/* PCI1 IO space */
-	pci_pot[1].potar = (CFG_PCI1_IO_BASE >> 12) & POTAR_TA_MASK;
-	pci_pot[1].pobar = (CFG_PCI1_IO_PHYS >> 12) & POBAR_BA_MASK;
+	pci_pot[1].potar = (CONFIG_SYS_PCI1_IO_BASE >> 12) & POTAR_TA_MASK;
+	pci_pot[1].pobar = (CONFIG_SYS_PCI1_IO_PHYS >> 12) & POBAR_BA_MASK;
 	pci_pot[1].pocmr = POCMR_EN | POCMR_IO | POCMR_CM_16M;
 
 	/* PCI1 mmio - non-prefetch mem space */
-	pci_pot[2].potar = (CFG_PCI1_MMIO_BASE >> 12) & POTAR_TA_MASK;
-	pci_pot[2].pobar = (CFG_PCI1_MMIO_PHYS >> 12) & POBAR_BA_MASK;
+	pci_pot[2].potar = (CONFIG_SYS_PCI1_MMIO_BASE >> 12) & POTAR_TA_MASK;
+	pci_pot[2].pobar = (CONFIG_SYS_PCI1_MMIO_PHYS >> 12) & POBAR_BA_MASK;
 	pci_pot[2].pocmr = POCMR_EN | POCMR_CM_256M;
 
 	/*
@@ -192,19 +192,19 @@ void pci_init_board(void)
 
 	/* PCI memory prefetch space */
 	pci_set_region(hose->regions + 0,
-		       CFG_PCI1_MEM_BASE,
-		       CFG_PCI1_MEM_PHYS,
-		       CFG_PCI1_MEM_SIZE, PCI_REGION_MEM | PCI_REGION_PREFETCH);
+		       CONFIG_SYS_PCI1_MEM_BASE,
+		       CONFIG_SYS_PCI1_MEM_PHYS,
+		       CONFIG_SYS_PCI1_MEM_SIZE, PCI_REGION_MEM | PCI_REGION_PREFETCH);
 
 	/* PCI memory space */
 	pci_set_region(hose->regions + 1,
-		       CFG_PCI1_MMIO_BASE,
-		       CFG_PCI1_MMIO_PHYS, CFG_PCI1_MMIO_SIZE, PCI_REGION_MEM);
+		       CONFIG_SYS_PCI1_MMIO_BASE,
+		       CONFIG_SYS_PCI1_MMIO_PHYS, CONFIG_SYS_PCI1_MMIO_SIZE, PCI_REGION_MEM);
 
 	/* PCI IO space */
 	pci_set_region(hose->regions + 2,
-		       CFG_PCI1_IO_BASE,
-		       CFG_PCI1_IO_PHYS, CFG_PCI1_IO_SIZE, PCI_REGION_IO);
+		       CONFIG_SYS_PCI1_IO_BASE,
+		       CONFIG_SYS_PCI1_IO_PHYS, CONFIG_SYS_PCI1_IO_SIZE, PCI_REGION_IO);
 
 	/* System memory space */
 	pci_set_region(hose->regions + 3,
@@ -215,7 +215,7 @@ void pci_init_board(void)
 	hose->region_count = 4;
 
 	pci_setup_indirect(hose,
-			   (CFG_IMMR + 0x8300), (CFG_IMMR + 0x8304));
+			   (CONFIG_SYS_IMMR + 0x8300), (CONFIG_SYS_IMMR + 0x8304));
 
 	pci_register_hose(hose);
 
@@ -251,18 +251,18 @@ void pci_init_board(void)
 	 */
 
 	/* PCI2 mem space - prefetch */
-	pci_pot[3].potar = (CFG_PCI2_MEM_BASE >> 12) & POTAR_TA_MASK;
-	pci_pot[3].pobar = (CFG_PCI2_MEM_PHYS >> 12) & POBAR_BA_MASK;
+	pci_pot[3].potar = (CONFIG_SYS_PCI2_MEM_BASE >> 12) & POTAR_TA_MASK;
+	pci_pot[3].pobar = (CONFIG_SYS_PCI2_MEM_PHYS >> 12) & POBAR_BA_MASK;
 	pci_pot[3].pocmr = POCMR_EN | POCMR_PCI2 | POCMR_PREFETCH_EN | POCMR_CM_256M;
 
 	/* PCI2 IO space */
-	pci_pot[4].potar = (CFG_PCI2_IO_BASE >> 12) & POTAR_TA_MASK;
-	pci_pot[4].pobar = (CFG_PCI2_IO_PHYS >> 12) & POBAR_BA_MASK;
+	pci_pot[4].potar = (CONFIG_SYS_PCI2_IO_BASE >> 12) & POTAR_TA_MASK;
+	pci_pot[4].pobar = (CONFIG_SYS_PCI2_IO_PHYS >> 12) & POBAR_BA_MASK;
 	pci_pot[4].pocmr = POCMR_EN | POCMR_PCI2 | POCMR_IO | POCMR_CM_16M;
 
 	/* PCI2 mmio - non-prefetch mem space */
-	pci_pot[5].potar = (CFG_PCI2_MMIO_BASE >> 12) & POTAR_TA_MASK;
-	pci_pot[5].pobar = (CFG_PCI2_MMIO_PHYS >> 12) & POBAR_BA_MASK;
+	pci_pot[5].potar = (CONFIG_SYS_PCI2_MMIO_BASE >> 12) & POTAR_TA_MASK;
+	pci_pot[5].pobar = (CONFIG_SYS_PCI2_MMIO_PHYS >> 12) & POBAR_BA_MASK;
 	pci_pot[5].pocmr = POCMR_EN | POCMR_PCI2 | POCMR_CM_256M;
 
 	/*
@@ -283,19 +283,19 @@ void pci_init_board(void)
 
 	/* PCI memory prefetch space */
 	pci_set_region(hose->regions + 0,
-		       CFG_PCI2_MEM_BASE,
-		       CFG_PCI2_MEM_PHYS,
-		       CFG_PCI2_MEM_SIZE, PCI_REGION_MEM | PCI_REGION_PREFETCH);
+		       CONFIG_SYS_PCI2_MEM_BASE,
+		       CONFIG_SYS_PCI2_MEM_PHYS,
+		       CONFIG_SYS_PCI2_MEM_SIZE, PCI_REGION_MEM | PCI_REGION_PREFETCH);
 
 	/* PCI memory space */
 	pci_set_region(hose->regions + 1,
-		       CFG_PCI2_MMIO_BASE,
-		       CFG_PCI2_MMIO_PHYS, CFG_PCI2_MMIO_SIZE, PCI_REGION_MEM);
+		       CONFIG_SYS_PCI2_MMIO_BASE,
+		       CONFIG_SYS_PCI2_MMIO_PHYS, CONFIG_SYS_PCI2_MMIO_SIZE, PCI_REGION_MEM);
 
 	/* PCI IO space */
 	pci_set_region(hose->regions + 2,
-		       CFG_PCI2_IO_BASE,
-		       CFG_PCI2_IO_PHYS, CFG_PCI2_IO_SIZE, PCI_REGION_IO);
+		       CONFIG_SYS_PCI2_IO_BASE,
+		       CONFIG_SYS_PCI2_IO_PHYS, CONFIG_SYS_PCI2_IO_SIZE, PCI_REGION_IO);
 
 	/* System memory space */
 	pci_set_region(hose->regions + 3,
@@ -306,7 +306,7 @@ void pci_init_board(void)
 	hose->region_count = 4;
 
 	pci_setup_indirect(hose,
-			   (CFG_IMMR + 0x8380), (CFG_IMMR + 0x8384));
+			   (CONFIG_SYS_IMMR + 0x8380), (CONFIG_SYS_IMMR + 0x8384));
 
 	pci_register_hose(hose);
 
diff --git a/board/freescale/mpc8360emds/mpc8360emds.c b/board/freescale/mpc8360emds/mpc8360emds.c
index 5c3b5dbc9..85c0120f2 100644
--- a/board/freescale/mpc8360emds/mpc8360emds.c
+++ b/board/freescale/mpc8360emds/mpc8360emds.c
@@ -92,8 +92,8 @@ const qe_iop_conf_t qe_iop_conf_tab[] = {
 int board_early_init_f(void)
 {
 
-	u8 *bcsr = (u8 *)CFG_BCSR;
-	const immap_t *immr = (immap_t *)CFG_IMMR;
+	u8 *bcsr = (u8 *)CONFIG_SYS_BCSR;
+	const immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
 
 	/* Enable flash write */
 	bcsr[0xa] &= ~0x04;
@@ -120,18 +120,18 @@ int board_early_init_r(void)
 extern void ddr_enable_ecc(unsigned int dram_size);
 #endif
 int fixed_sdram(void);
-void sdram_init(void);
+static int sdram_init(unsigned int base);
 
 phys_size_t initdram(int board_type)
 {
-	volatile immap_t *im = (immap_t *) CFG_IMMR;
+	volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR;
 	u32 msize = 0;
 
 	if ((im->sysconf.immrbar & IMMRBAR_BASE_ADDR) != (u32) im)
 		return -1;
 
 	/* DDR SDRAM - Main SODIMM */
-	im->sysconf.ddrlaw[0].bar = CFG_DDR_BASE & LAWBAR_BAR;
+	im->sysconf.ddrlaw[0].bar = CONFIG_SYS_DDR_BASE & LAWBAR_BAR;
 #if defined(CONFIG_SPD_EEPROM)
 	msize = spd_sdram();
 #else
@@ -147,7 +147,7 @@ phys_size_t initdram(int board_type)
 	/*
 	 * Initialize SDRAM if it is on local bus.
 	 */
-	sdram_init();
+	msize += sdram_init(msize * 1024 * 1024);
 
 	/* return total bus SDRAM size(bytes)  -- DDR */
 	return (msize * 1024 * 1024);
@@ -159,12 +159,12 @@ phys_size_t initdram(int board_type)
  ************************************************************************/
 int fixed_sdram(void)
 {
-	volatile immap_t *im = (immap_t *) CFG_IMMR;
+	volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR;
 	u32 msize = 0;
 	u32 ddr_size;
 	u32 ddr_size_log2;
 
-	msize = CFG_DDR_SIZE;
+	msize = CONFIG_SYS_DDR_SIZE;
 	for (ddr_size = msize << 20, ddr_size_log2 = 0;
 	     (ddr_size > 1); ddr_size = ddr_size >> 1, ddr_size_log2++) {
 		if (ddr_size & 1) {
@@ -173,42 +173,42 @@ int fixed_sdram(void)
 	}
 	im->sysconf.ddrlaw[0].ar =
 	    LAWAR_EN | ((ddr_size_log2 - 1) & LAWAR_SIZE);
-#if (CFG_DDR_SIZE != 256)
+#if (CONFIG_SYS_DDR_SIZE != 256)
 #warning Currenly any ddr size other than 256 is not supported
 #endif
 #ifdef CONFIG_DDR_II
-	im->ddr.csbnds[0].csbnds = CFG_DDR_CS0_BNDS;
-	im->ddr.cs_config[0] = CFG_DDR_CS0_CONFIG;
-	im->ddr.timing_cfg_0 = CFG_DDR_TIMING_0;
-	im->ddr.timing_cfg_1 = CFG_DDR_TIMING_1;
-	im->ddr.timing_cfg_2 = CFG_DDR_TIMING_2;
-	im->ddr.timing_cfg_3 = CFG_DDR_TIMING_3;
-	im->ddr.sdram_cfg = CFG_DDR_SDRAM_CFG;
-	im->ddr.sdram_cfg2 = CFG_DDR_SDRAM_CFG2;
-	im->ddr.sdram_mode = CFG_DDR_MODE;
-	im->ddr.sdram_mode2 = CFG_DDR_MODE2;
-	im->ddr.sdram_interval = CFG_DDR_INTERVAL;
-	im->ddr.sdram_clk_cntl = CFG_DDR_CLK_CNTL;
+	im->ddr.csbnds[0].csbnds = CONFIG_SYS_DDR_CS0_BNDS;
+	im->ddr.cs_config[0] = CONFIG_SYS_DDR_CS0_CONFIG;
+	im->ddr.timing_cfg_0 = CONFIG_SYS_DDR_TIMING_0;
+	im->ddr.timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1;
+	im->ddr.timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2;
+	im->ddr.timing_cfg_3 = CONFIG_SYS_DDR_TIMING_3;
+	im->ddr.sdram_cfg = CONFIG_SYS_DDR_SDRAM_CFG;
+	im->ddr.sdram_cfg2 = CONFIG_SYS_DDR_SDRAM_CFG2;
+	im->ddr.sdram_mode = CONFIG_SYS_DDR_MODE;
+	im->ddr.sdram_mode2 = CONFIG_SYS_DDR_MODE2;
+	im->ddr.sdram_interval = CONFIG_SYS_DDR_INTERVAL;
+	im->ddr.sdram_clk_cntl = CONFIG_SYS_DDR_CLK_CNTL;
 #else
 	im->ddr.csbnds[0].csbnds = 0x00000007;
 	im->ddr.csbnds[1].csbnds = 0x0008000f;
 
-	im->ddr.cs_config[0] = CFG_DDR_CONFIG;
-	im->ddr.cs_config[1] = CFG_DDR_CONFIG;
+	im->ddr.cs_config[0] = CONFIG_SYS_DDR_CONFIG;
+	im->ddr.cs_config[1] = CONFIG_SYS_DDR_CONFIG;
 
-	im->ddr.timing_cfg_1 = CFG_DDR_TIMING_1;
-	im->ddr.timing_cfg_2 = CFG_DDR_TIMING_2;
-	im->ddr.sdram_cfg = CFG_DDR_CONTROL;
+	im->ddr.timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1;
+	im->ddr.timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2;
+	im->ddr.sdram_cfg = CONFIG_SYS_DDR_CONTROL;
 
-	im->ddr.sdram_mode = CFG_DDR_MODE;
-	im->ddr.sdram_interval = CFG_DDR_INTERVAL;
+	im->ddr.sdram_mode = CONFIG_SYS_DDR_MODE;
+	im->ddr.sdram_interval = CONFIG_SYS_DDR_INTERVAL;
 #endif
 	udelay(200);
 	im->ddr.sdram_cfg |= SDRAM_CFG_MEM_EN;
 
 	return msize;
 }
-#endif				/*!CFG_SPD_EEPROM */
+#endif				/*!CONFIG_SYS_SPD_EEPROM */
 
 int checkboard(void)
 {
@@ -219,34 +219,43 @@ int checkboard(void)
 /*
  * if MPC8360EMDS is soldered with SDRAM
  */
-#if defined(CFG_BR2_PRELIM)  \
-	&& defined(CFG_OR2_PRELIM) \
-	&& defined(CFG_LBLAWBAR2_PRELIM) \
-	&& defined(CFG_LBLAWAR2_PRELIM)
+#ifdef CONFIG_SYS_LB_SDRAM
 /*
  * Initialize SDRAM memory on the Local Bus.
  */
 
-void sdram_init(void)
+static int sdram_init(unsigned int base)
 {
-	volatile immap_t *immap = (immap_t *) CFG_IMMR;
-	volatile lbus83xx_t *lbc = &immap->lbus;
-	uint *sdram_addr = (uint *) CFG_LBC_SDRAM_BASE;
+	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
+	volatile fsl_lbus_t *lbc = &immap->lbus;
+	const int sdram_size = CONFIG_SYS_LBC_SDRAM_SIZE * 1024 * 1024;
+	int rem = base % sdram_size;
+	uint *sdram_addr;
 
+	/* window base address should be aligned to the window size */
+	if (rem)
+		base = base - rem + sdram_size;
+
+	sdram_addr = (uint *)base;
 	/*
-	 * Setup SDRAM Base and Option Registers, already done in cpu_init.c
+	 * Setup SDRAM Base and Option Registers
 	 */
+	immap->lbus.bank[2].br = base | CONFIG_SYS_BR2;
+	immap->lbus.bank[2].or = CONFIG_SYS_OR2;
+	immap->sysconf.lblaw[2].bar = base;
+	immap->sysconf.lblaw[2].ar = CONFIG_SYS_LBLAWAR2;
+
 	/*setup mtrpt, lsrt and lbcr for LB bus */
-	lbc->lbcr = CFG_LBC_LBCR;
-	lbc->mrtpr = CFG_LBC_MRTPR;
-	lbc->lsrt = CFG_LBC_LSRT;
+	lbc->lbcr = CONFIG_SYS_LBC_LBCR;
+	lbc->mrtpr = CONFIG_SYS_LBC_MRTPR;
+	lbc->lsrt = CONFIG_SYS_LBC_LSRT;
 	asm("sync");
 
 	/*
 	 * Configure the SDRAM controller Machine Mode Register.
 	 */
-	lbc->lsdmr = CFG_LBC_LSDMR_5;	/* Normal Operation */
-	lbc->lsdmr = CFG_LBC_LSDMR_1;	/* Precharge All Banks */
+	lbc->lsdmr = CONFIG_SYS_LBC_LSDMR_5;	/* Normal Operation */
+	lbc->lsdmr = CONFIG_SYS_LBC_LSDMR_1;	/* Precharge All Banks */
 	asm("sync");
 	*sdram_addr = 0xff;
 	udelay(100);
@@ -254,7 +263,7 @@ void sdram_init(void)
 	/*
 	 * We need do 8 times auto refresh operation.
 	 */
-	lbc->lsdmr = CFG_LBC_LSDMR_2;
+	lbc->lsdmr = CONFIG_SYS_LBC_LSDMR_2;
 	asm("sync");
 	*sdram_addr = 0xff;	/* 1 times */
 	udelay(100);
@@ -274,27 +283,33 @@ void sdram_init(void)
 	udelay(100);
 
 	/* Mode register write operation */
-	lbc->lsdmr = CFG_LBC_LSDMR_4;
+	lbc->lsdmr = CONFIG_SYS_LBC_LSDMR_4;
 	asm("sync");
 	*(sdram_addr + 0xcc) = 0xff;
 	udelay(100);
 
 	/* Normal operation */
-	lbc->lsdmr = CFG_LBC_LSDMR_5 | 0x40000000;
+	lbc->lsdmr = CONFIG_SYS_LBC_LSDMR_5 | 0x40000000;
 	asm("sync");
 	*sdram_addr = 0xff;
 	udelay(100);
+
+	/*
+	 * In non-aligned case we don't [normally] use that memory because
+	 * there is a hole.
+	 */
+	if (rem)
+		return 0;
+	return CONFIG_SYS_LBC_SDRAM_SIZE;
 }
 #else
-void sdram_init(void)
-{
-}
+static int sdram_init(unsigned int base) { return 0; }
 #endif
 
 #if defined(CONFIG_OF_BOARD_SETUP)
 void ft_board_setup(void *blob, bd_t *bd)
 {
-	const immap_t *immr = (immap_t *)CFG_IMMR;
+	const immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
 
 	ft_cpu_setup(blob, bd);
 #ifdef CONFIG_PCI
diff --git a/board/freescale/mpc8360emds/pci.c b/board/freescale/mpc8360emds/pci.c
index 4a0d460fa..935aca26d 100644
--- a/board/freescale/mpc8360emds/pci.c
+++ b/board/freescale/mpc8360emds/pci.c
@@ -67,7 +67,7 @@ void pci_init_board(void)
 	volatile pcictrl83xx_t *pci_ctrl;
 	volatile pciconf83xx_t *pci_conf;
 
-	immr = (immap_t *) CFG_IMMR;
+	immr = (immap_t *) CONFIG_SYS_IMMR;
 	pci_law = immr->sysconf.pcilaw;
 	pci_pot = immr->ios.pot;
 	pci_ctrl = immr->pci_ctrl;
@@ -93,7 +93,7 @@ void pci_init_board(void)
 	hose[0].first_busno = 0;
 	hose[0].last_busno = 0xff;
 	pci_setup_indirect(&hose[0],
-			   (CFG_IMMR + 0x8300), (CFG_IMMR + 0x8304));
+			   (CONFIG_SYS_IMMR + 0x8300), (CONFIG_SYS_IMMR + 0x8304));
 	reg16 = 0xff;
 
 	pci_hose_read_config_word(&hose[0], PCI_BDF(0, 0, 0),
@@ -134,7 +134,7 @@ void pci_init_board(void)
 	u32 val32;
 	u32 dev;
 
-	immr = (immap_t *) CFG_IMMR;
+	immr = (immap_t *) CONFIG_SYS_IMMR;
 	clk = (clk83xx_t *) & immr->clk;
 	pci_law = immr->sysconf.pcilaw;
 	pci_pot = immr->ios.pot;
@@ -161,10 +161,10 @@ void pci_init_board(void)
 	/*
 	 * Configure PCI Local Access Windows
 	 */
-	pci_law[0].bar = CFG_PCI_MEM_PHYS & LAWBAR_BAR;
+	pci_law[0].bar = CONFIG_SYS_PCI_MEM_PHYS & LAWBAR_BAR;
 	pci_law[0].ar = LAWAR_EN | LAWAR_SIZE_512M;
 
-	pci_law[1].bar = CFG_PCI_IO_PHYS & LAWBAR_BAR;
+	pci_law[1].bar = CONFIG_SYS_PCI_IO_PHYS & LAWBAR_BAR;
 	pci_law[1].ar = LAWAR_EN | LAWAR_SIZE_1M;
 
 	/*
@@ -172,26 +172,26 @@ void pci_init_board(void)
 	 */
 
 	/* PCI mem space - prefetch */
-	pci_pot[0].potar = (CFG_PCI_MEM_BASE >> 12) & POTAR_TA_MASK;
-	pci_pot[0].pobar = (CFG_PCI_MEM_PHYS >> 12) & POBAR_BA_MASK;
+	pci_pot[0].potar = (CONFIG_SYS_PCI_MEM_BASE >> 12) & POTAR_TA_MASK;
+	pci_pot[0].pobar = (CONFIG_SYS_PCI_MEM_PHYS >> 12) & POBAR_BA_MASK;
 	pci_pot[0].pocmr =
 	    POCMR_EN | POCMR_SE | (POCMR_CM_256M & POCMR_CM_MASK);
 
 	/* PCI mmio - non-prefetch mem space */
-	pci_pot[1].potar = (CFG_PCI_MMIO_BASE >> 12) & POTAR_TA_MASK;
-	pci_pot[1].pobar = (CFG_PCI_MMIO_PHYS >> 12) & POBAR_BA_MASK;
+	pci_pot[1].potar = (CONFIG_SYS_PCI_MMIO_BASE >> 12) & POTAR_TA_MASK;
+	pci_pot[1].pobar = (CONFIG_SYS_PCI_MMIO_PHYS >> 12) & POBAR_BA_MASK;
 	pci_pot[1].pocmr = POCMR_EN | (POCMR_CM_256M & POCMR_CM_MASK);
 
 	/* PCI IO space */
-	pci_pot[2].potar = (CFG_PCI_IO_BASE >> 12) & POTAR_TA_MASK;
-	pci_pot[2].pobar = (CFG_PCI_IO_PHYS >> 12) & POBAR_BA_MASK;
+	pci_pot[2].potar = (CONFIG_SYS_PCI_IO_BASE >> 12) & POTAR_TA_MASK;
+	pci_pot[2].pobar = (CONFIG_SYS_PCI_IO_PHYS >> 12) & POBAR_BA_MASK;
 	pci_pot[2].pocmr = POCMR_EN | POCMR_IO | (POCMR_CM_1M & POCMR_CM_MASK);
 
 	/*
 	 * Configure PCI Inbound Translation Windows
 	 */
-	pci_ctrl[0].pitar1 = (CFG_PCI_SLV_MEM_LOCAL >> 12) & PITAR_TA_MASK;
-	pci_ctrl[0].pibar1 = (CFG_PCI_SLV_MEM_BUS >> 12) & PIBAR_MASK;
+	pci_ctrl[0].pitar1 = (CONFIG_SYS_PCI_SLV_MEM_LOCAL >> 12) & PITAR_TA_MASK;
+	pci_ctrl[0].pibar1 = (CONFIG_SYS_PCI_SLV_MEM_BUS >> 12) & PIBAR_MASK;
 	pci_ctrl[0].piebar1 = 0x0;
 	pci_ctrl[0].piwar1 =
 	    PIWAR_EN | PIWAR_PF | PIWAR_RTT_SNOOP | PIWAR_WTT_SNOOP |
@@ -209,31 +209,31 @@ void pci_init_board(void)
 
 	/* PCI memory prefetch space */
 	pci_set_region(hose[0].regions + 0,
-		       CFG_PCI_MEM_BASE,
-		       CFG_PCI_MEM_PHYS,
-		       CFG_PCI_MEM_SIZE, PCI_REGION_MEM | PCI_REGION_PREFETCH);
+		       CONFIG_SYS_PCI_MEM_BASE,
+		       CONFIG_SYS_PCI_MEM_PHYS,
+		       CONFIG_SYS_PCI_MEM_SIZE, PCI_REGION_MEM | PCI_REGION_PREFETCH);
 
 	/* PCI memory space */
 	pci_set_region(hose[0].regions + 1,
-		       CFG_PCI_MMIO_BASE,
-		       CFG_PCI_MMIO_PHYS, CFG_PCI_MMIO_SIZE, PCI_REGION_MEM);
+		       CONFIG_SYS_PCI_MMIO_BASE,
+		       CONFIG_SYS_PCI_MMIO_PHYS, CONFIG_SYS_PCI_MMIO_SIZE, PCI_REGION_MEM);
 
 	/* PCI IO space */
 	pci_set_region(hose[0].regions + 2,
-		       CFG_PCI_IO_BASE,
-		       CFG_PCI_IO_PHYS, CFG_PCI_IO_SIZE, PCI_REGION_IO);
+		       CONFIG_SYS_PCI_IO_BASE,
+		       CONFIG_SYS_PCI_IO_PHYS, CONFIG_SYS_PCI_IO_SIZE, PCI_REGION_IO);
 
 	/* System memory space */
 	pci_set_region(hose[0].regions + 3,
-		       CFG_PCI_SLV_MEM_LOCAL,
-		       CFG_PCI_SLV_MEM_BUS,
-		       CFG_PCI_SLV_MEM_SIZE,
+		       CONFIG_SYS_PCI_SLV_MEM_LOCAL,
+		       CONFIG_SYS_PCI_SLV_MEM_BUS,
+		       CONFIG_SYS_PCI_SLV_MEM_SIZE,
 		       PCI_REGION_MEM | PCI_REGION_MEMORY);
 
 	hose[0].region_count = 4;
 
 	pci_setup_indirect(&hose[0],
-			   (CFG_IMMR + 0x8300), (CFG_IMMR + 0x8304));
+			   (CONFIG_SYS_IMMR + 0x8300), (CONFIG_SYS_IMMR + 0x8304));
 
 	pci_register_hose(hose);
 
diff --git a/board/freescale/mpc8360erdk/mpc8360erdk.c b/board/freescale/mpc8360erdk/mpc8360erdk.c
index 61d700014..af3b8ceae 100644
--- a/board/freescale/mpc8360erdk/mpc8360erdk.c
+++ b/board/freescale/mpc8360erdk/mpc8360erdk.c
@@ -214,7 +214,7 @@ int board_early_init_f(void)
 
 int board_early_init_r(void)
 {
-	void *reg = (void *)(CFG_IMMR + 0x14a8);
+	void *reg = (void *)(CONFIG_SYS_IMMR + 0x14a8);
 	u32 val;
 
 	/*
@@ -233,12 +233,12 @@ int board_early_init_r(void)
 
 int fixed_sdram(void)
 {
-	volatile immap_t *im = (immap_t *)CFG_IMMR;
+	volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
 	u32 msize = 0;
 	u32 ddr_size;
 	u32 ddr_size_log2;
 
-	msize = CFG_DDR_SIZE;
+	msize = CONFIG_SYS_DDR_SIZE;
 	for (ddr_size = msize << 20, ddr_size_log2 = 0;
 	     (ddr_size > 1); ddr_size = ddr_size >> 1, ddr_size_log2++) {
 		if (ddr_size & 1)
@@ -248,18 +248,18 @@ int fixed_sdram(void)
 	im->sysconf.ddrlaw[0].ar =
 	    LAWAR_EN | ((ddr_size_log2 - 1) & LAWAR_SIZE);
 
-	im->ddr.csbnds[0].csbnds = CFG_DDR_CS0_BNDS;
-	im->ddr.cs_config[0] = CFG_DDR_CS0_CONFIG;
-	im->ddr.timing_cfg_0 = CFG_DDR_TIMING_0;
-	im->ddr.timing_cfg_1 = CFG_DDR_TIMING_1;
-	im->ddr.timing_cfg_2 = CFG_DDR_TIMING_2;
-	im->ddr.timing_cfg_3 = CFG_DDR_TIMING_3;
-	im->ddr.sdram_cfg = CFG_DDR_SDRAM_CFG;
-	im->ddr.sdram_cfg2 = CFG_DDR_SDRAM_CFG2;
-	im->ddr.sdram_mode = CFG_DDR_MODE;
-	im->ddr.sdram_mode2 = CFG_DDR_MODE2;
-	im->ddr.sdram_interval = CFG_DDR_INTERVAL;
-	im->ddr.sdram_clk_cntl = CFG_DDR_CLK_CNTL;
+	im->ddr.csbnds[0].csbnds = CONFIG_SYS_DDR_CS0_BNDS;
+	im->ddr.cs_config[0] = CONFIG_SYS_DDR_CS0_CONFIG;
+	im->ddr.timing_cfg_0 = CONFIG_SYS_DDR_TIMING_0;
+	im->ddr.timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1;
+	im->ddr.timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2;
+	im->ddr.timing_cfg_3 = CONFIG_SYS_DDR_TIMING_3;
+	im->ddr.sdram_cfg = CONFIG_SYS_DDR_SDRAM_CFG;
+	im->ddr.sdram_cfg2 = CONFIG_SYS_DDR_SDRAM_CFG2;
+	im->ddr.sdram_mode = CONFIG_SYS_DDR_MODE;
+	im->ddr.sdram_mode2 = CONFIG_SYS_DDR_MODE2;
+	im->ddr.sdram_interval = CONFIG_SYS_DDR_INTERVAL;
+	im->ddr.sdram_clk_cntl = CONFIG_SYS_DDR_CLK_CNTL;
 	udelay(200);
 	im->ddr.sdram_cfg |= SDRAM_CFG_MEM_EN;
 
@@ -271,14 +271,14 @@ phys_size_t initdram(int board_type)
 #if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRC)
 	extern void ddr_enable_ecc(unsigned int dram_size);
 #endif
-	volatile immap_t *im = (immap_t *)CFG_IMMR;
+	volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
 	u32 msize = 0;
 
 	if ((im->sysconf.immrbar & IMMRBAR_BASE_ADDR) != (u32)im)
 		return -1;
 
 	/* DDR SDRAM - Main SODIMM */
-	im->sysconf.ddrlaw[0].bar = CFG_DDR_BASE & LAWBAR_BAR;
+	im->sysconf.ddrlaw[0].bar = CONFIG_SYS_DDR_BASE & LAWBAR_BAR;
 	msize = fixed_sdram();
 
 #if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRC)
@@ -300,28 +300,28 @@ int checkboard(void)
 
 static struct pci_region pci_regions[] = {
 	{
-		.bus_start = CFG_PCI1_MEM_BASE,
-		.phys_start = CFG_PCI1_MEM_PHYS,
-		.size = CFG_PCI1_MEM_SIZE,
+		.bus_start = CONFIG_SYS_PCI1_MEM_BASE,
+		.phys_start = CONFIG_SYS_PCI1_MEM_PHYS,
+		.size = CONFIG_SYS_PCI1_MEM_SIZE,
 		.flags = PCI_REGION_MEM | PCI_REGION_PREFETCH,
 	},
 	{
-		.bus_start = CFG_PCI1_MMIO_BASE,
-		.phys_start = CFG_PCI1_MMIO_PHYS,
-		.size = CFG_PCI1_MMIO_SIZE,
+		.bus_start = CONFIG_SYS_PCI1_MMIO_BASE,
+		.phys_start = CONFIG_SYS_PCI1_MMIO_PHYS,
+		.size = CONFIG_SYS_PCI1_MMIO_SIZE,
 		.flags = PCI_REGION_MEM,
 	},
 	{
-		.bus_start = CFG_PCI1_IO_BASE,
-		.phys_start = CFG_PCI1_IO_PHYS,
-		.size = CFG_PCI1_IO_SIZE,
+		.bus_start = CONFIG_SYS_PCI1_IO_BASE,
+		.phys_start = CONFIG_SYS_PCI1_IO_PHYS,
+		.size = CONFIG_SYS_PCI1_IO_SIZE,
 		.flags = PCI_REGION_IO,
 	},
 };
 
 void pci_init_board(void)
 {
-	volatile immap_t *immr = (volatile immap_t *)CFG_IMMR;
+	volatile immap_t *immr = (volatile immap_t *)CONFIG_SYS_IMMR;
 	volatile clk83xx_t *clk = (volatile clk83xx_t *)&immr->clk;
 	volatile law83xx_t *pci_law = immr->sysconf.pcilaw;
 	struct pci_region *reg[] = { pci_regions, };
@@ -338,10 +338,10 @@ void pci_init_board(void)
 	udelay(2000);
 
 	/* Configure PCI Local Access Windows */
-	pci_law[0].bar = CFG_PCI1_MEM_PHYS & LAWBAR_BAR;
+	pci_law[0].bar = CONFIG_SYS_PCI1_MEM_PHYS & LAWBAR_BAR;
 	pci_law[0].ar = LBLAWAR_EN | LBLAWAR_512MB;
 
-	pci_law[1].bar = CFG_PCI1_IO_PHYS & LAWBAR_BAR;
+	pci_law[1].bar = CONFIG_SYS_PCI1_IO_PHYS & LAWBAR_BAR;
 	pci_law[1].ar = LBLAWAR_EN | LBLAWAR_1MB;
 
 	mpc83xx_pci_init(1, reg, 0);
diff --git a/board/freescale/mpc8360erdk/nand.c b/board/freescale/mpc8360erdk/nand.c
index 8b44a0f38..8e22e138a 100644
--- a/board/freescale/mpc8360erdk/nand.c
+++ b/board/freescale/mpc8360erdk/nand.c
@@ -18,7 +18,7 @@
 #include <linux/mtd/fsl_upm.h>
 #include <nand.h>
 
-static struct immap *im = (struct immap *)CFG_IMMR;
+static struct immap *im = (struct immap *)CONFIG_SYS_IMMR;
 
 static const u32 upm_array[] = {
 	0x0ff03c30, 0x0ff03c30, 0x0ff03c34, 0x0ff33c30, /* Words  0 to  3 */
@@ -70,7 +70,7 @@ static int dev_ready(void)
 
 static struct fsl_upm_nand fun = {
 	.upm = {
-		.io_addr = (void *)CFG_NAND_BASE,
+		.io_addr = (void *)CONFIG_SYS_NAND_BASE,
 	},
 	.width = 8,
 	.upm_cmd_offset = 8,
diff --git a/board/freescale/mpc837xemds/mpc837xemds.c b/board/freescale/mpc837xemds/mpc837xemds.c
index 40f1e6328..acf8ada7b 100644
--- a/board/freescale/mpc837xemds/mpc837xemds.c
+++ b/board/freescale/mpc837xemds/mpc837xemds.c
@@ -15,16 +15,14 @@
 #include <asm/io.h>
 #include <asm/fsl_serdes.h>
 #include <spd_sdram.h>
-#if defined(CONFIG_OF_LIBFDT)
+#include <tsec.h>
 #include <libfdt.h>
-#endif
-#if defined(CONFIG_PQ_MDS_PIB)
+#include <fdt_support.h>
 #include "../common/pq-mds-pib.h"
-#endif
 
 int board_early_init_f(void)
 {
-	u8 *bcsr = (u8 *)CFG_BCSR;
+	u8 *bcsr = (u8 *)CONFIG_SYS_BCSR;
 
 	/* Enable flash write */
 	bcsr[0x9] &= ~0x04;
@@ -32,7 +30,7 @@ int board_early_init_f(void)
 	bcsr[0xe] = 0xff;
 
 #ifdef CONFIG_FSL_SERDES
-	immap_t *immr = (immap_t *)CFG_IMMR;
+	immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
 	u32 spridr = in_be32(&immr->sysconf.spridr);
 
 	/* we check only part num, and don't look for CPU revisions */
@@ -44,7 +42,9 @@ int board_early_init_f(void)
 				 FSL_SERDES_CLK_100, FSL_SERDES_VDD_1V);
 		break;
 	case SPR_8378:
-		fsl_setup_serdes(CONFIG_FSL_SERDES1, FSL_SERDES_PROTO_PEX,
+		fsl_setup_serdes(CONFIG_FSL_SERDES1, FSL_SERDES_PROTO_SGMII,
+				 FSL_SERDES_CLK_125, FSL_SERDES_VDD_1V);
+		fsl_setup_serdes(CONFIG_FSL_SERDES2, FSL_SERDES_PROTO_PEX,
 				 FSL_SERDES_CLK_100, FSL_SERDES_VDD_1V);
 		break;
 	case SPR_8379:
@@ -62,6 +62,125 @@ int board_early_init_f(void)
 	return 0;
 }
 
+#if defined(CONFIG_TSEC1) || defined(CONFIG_TSEC2)
+int board_eth_init(bd_t *bd)
+{
+	struct tsec_info_struct tsec_info[2];
+	struct immap __iomem *im = (struct immap __iomem *)CONFIG_SYS_IMMR;
+	u32 rcwh = in_be32(&im->reset.rcwh);
+	u32 tsec_mode;
+	int num = 0;
+
+	/* New line after Net: */
+	printf("\n");
+
+#ifdef CONFIG_TSEC1
+	SET_STD_TSEC_INFO(tsec_info[num], 1);
+
+	printf(CONFIG_TSEC1_NAME ": ");
+
+	tsec_mode = rcwh & HRCWH_TSEC1M_MASK;
+	if (tsec_mode == HRCWH_TSEC1M_IN_RGMII) {
+		printf("RGMII\n");
+		/* this is default, no need to fixup */
+	} else if (tsec_mode == HRCWH_TSEC1M_IN_SGMII) {
+		printf("SGMII\n");
+		tsec_info[num].phyaddr = TSEC1_PHY_ADDR_SGMII;
+		tsec_info[num].flags = TSEC_GIGABIT;
+	} else {
+		printf("unsupported PHY type\n");
+	}
+	num++;
+#endif
+#ifdef CONFIG_TSEC2
+	SET_STD_TSEC_INFO(tsec_info[num], 2);
+
+	printf(CONFIG_TSEC2_NAME ": ");
+
+	tsec_mode = rcwh & HRCWH_TSEC2M_MASK;
+	if (tsec_mode == HRCWH_TSEC2M_IN_RGMII) {
+		printf("RGMII\n");
+		/* this is default, no need to fixup */
+	} else if (tsec_mode == HRCWH_TSEC2M_IN_SGMII) {
+		printf("SGMII\n");
+		tsec_info[num].phyaddr = TSEC2_PHY_ADDR_SGMII;
+		tsec_info[num].flags = TSEC_GIGABIT;
+	} else {
+		printf("unsupported PHY type\n");
+	}
+	num++;
+#endif
+	return tsec_eth_init(bd, tsec_info, num);
+}
+
+static void __ft_tsec_fixup(void *blob, bd_t *bd, const char *alias,
+			    int phy_addr)
+{
+	const char *phy_type = "sgmii";
+	const u32 *ph;
+	int off;
+	int err;
+
+	off = fdt_path_offset(blob, alias);
+	if (off < 0) {
+		printf("WARNING: could not find %s alias: %s.\n", alias,
+			fdt_strerror(off));
+		return;
+	}
+
+	err = fdt_setprop(blob, off, "phy-connection-type", phy_type,
+			  strlen(phy_type) + 1);
+	if (err) {
+		printf("WARNING: could not set phy-connection-type for %s: "
+			"%s.\n", alias, fdt_strerror(err));
+		return;
+	}
+
+	ph = (u32 *)fdt_getprop(blob, off, "phy-handle", 0);
+	if (!ph) {
+		printf("WARNING: could not get phy-handle for %s.\n",
+			alias);
+		return;
+	}
+
+	off = fdt_node_offset_by_phandle(blob, *ph);
+	if (off < 0) {
+		printf("WARNING: could not get phy node for %s: %s\n", alias,
+			fdt_strerror(off));
+		return;
+	}
+
+	phy_addr = cpu_to_fdt32(phy_addr);
+	err = fdt_setprop(blob, off, "reg", &phy_addr, sizeof(phy_addr));
+	if (err < 0) {
+		printf("WARNING: could not set phy node's reg for %s: "
+			"%s.\n", alias, fdt_strerror(err));
+		return;
+	}
+}
+
+static void ft_tsec_fixup(void *blob, bd_t *bd)
+{
+	struct immap __iomem *im = (struct immap __iomem *)CONFIG_SYS_IMMR;
+	u32 rcwh = in_be32(&im->reset.rcwh);
+	u32 tsec_mode;
+
+#ifdef CONFIG_TSEC1
+	tsec_mode = rcwh & HRCWH_TSEC1M_MASK;
+	if (tsec_mode == HRCWH_TSEC1M_IN_SGMII)
+		__ft_tsec_fixup(blob, bd, "ethernet0", TSEC1_PHY_ADDR_SGMII);
+#endif
+
+#ifdef CONFIG_TSEC2
+	tsec_mode = rcwh & HRCWH_TSEC2M_MASK;
+	if (tsec_mode == HRCWH_TSEC2M_IN_SGMII)
+		__ft_tsec_fixup(blob, bd, "ethernet1", TSEC2_PHY_ADDR_SGMII);
+#endif
+}
+#else
+static inline void ft_tsec_fixup(void *blob, bd_t *bd) {}
+#endif /* defined(CONFIG_TSEC1) || defined(CONFIG_TSEC2) */
+
 int board_early_init_r(void)
 {
 #ifdef CONFIG_PQ_MDS_PIB
@@ -77,7 +196,7 @@ int fixed_sdram(void);
 
 phys_size_t initdram(int board_type)
 {
-	volatile immap_t *im = (immap_t *) CFG_IMMR;
+	volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR;
 	u32 msize = 0;
 
 	if ((im->sysconf.immrbar & IMMRBAR_BASE_ADDR) != (u32) im)
@@ -104,43 +223,43 @@ phys_size_t initdram(int board_type)
  ************************************************************************/
 int fixed_sdram(void)
 {
-	volatile immap_t *im = (immap_t *) CFG_IMMR;
-	u32 msize = CFG_DDR_SIZE * 1024 * 1024;
+	volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR;
+	u32 msize = CONFIG_SYS_DDR_SIZE * 1024 * 1024;
 	u32 msize_log2 = __ilog2(msize);
 
-	im->sysconf.ddrlaw[0].bar = CFG_DDR_SDRAM_BASE >> 12;
+	im->sysconf.ddrlaw[0].bar = CONFIG_SYS_DDR_SDRAM_BASE & 0xfffff000;
 	im->sysconf.ddrlaw[0].ar = LBLAWAR_EN | (msize_log2 - 1);
 
-#if (CFG_DDR_SIZE != 512)
+#if (CONFIG_SYS_DDR_SIZE != 512)
 #warning Currenly any ddr size other than 512 is not supported
 #endif
-	im->sysconf.ddrcdr = CFG_DDRCDR_VALUE;
+	im->sysconf.ddrcdr = CONFIG_SYS_DDRCDR_VALUE;
 	udelay(50000);
 
-	im->ddr.sdram_clk_cntl = CFG_DDR_SDRAM_CLK_CNTL;
+	im->ddr.sdram_clk_cntl = CONFIG_SYS_DDR_SDRAM_CLK_CNTL;
 	udelay(1000);
 
-	im->ddr.csbnds[0].csbnds = CFG_DDR_CS0_BNDS;
-	im->ddr.cs_config[0] = CFG_DDR_CS0_CONFIG;
+	im->ddr.csbnds[0].csbnds = CONFIG_SYS_DDR_CS0_BNDS;
+	im->ddr.cs_config[0] = CONFIG_SYS_DDR_CS0_CONFIG;
 	udelay(1000);
 
-	im->ddr.timing_cfg_0 = CFG_DDR_TIMING_0;
-	im->ddr.timing_cfg_1 = CFG_DDR_TIMING_1;
-	im->ddr.timing_cfg_2 = CFG_DDR_TIMING_2;
-	im->ddr.timing_cfg_3 = CFG_DDR_TIMING_3;
-	im->ddr.sdram_cfg = CFG_DDR_SDRAM_CFG;
-	im->ddr.sdram_cfg2 = CFG_DDR_SDRAM_CFG2;
-	im->ddr.sdram_mode = CFG_DDR_MODE;
-	im->ddr.sdram_mode2 = CFG_DDR_MODE2;
-	im->ddr.sdram_interval = CFG_DDR_INTERVAL;
+	im->ddr.timing_cfg_0 = CONFIG_SYS_DDR_TIMING_0;
+	im->ddr.timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1;
+	im->ddr.timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2;
+	im->ddr.timing_cfg_3 = CONFIG_SYS_DDR_TIMING_3;
+	im->ddr.sdram_cfg = CONFIG_SYS_DDR_SDRAM_CFG;
+	im->ddr.sdram_cfg2 = CONFIG_SYS_DDR_SDRAM_CFG2;
+	im->ddr.sdram_mode = CONFIG_SYS_DDR_MODE;
+	im->ddr.sdram_mode2 = CONFIG_SYS_DDR_MODE2;
+	im->ddr.sdram_interval = CONFIG_SYS_DDR_INTERVAL;
 	__asm__ __volatile__("sync");
 	udelay(1000);
 
 	im->ddr.sdram_cfg |= SDRAM_CFG_MEM_EN;
 	udelay(2000);
-	return CFG_DDR_SIZE;
+	return CONFIG_SYS_DDR_SIZE;
 }
-#endif /*!CFG_SPD_EEPROM */
+#endif /*!CONFIG_SYS_SPD_EEPROM */
 
 int checkboard(void)
 {
@@ -148,12 +267,55 @@ int checkboard(void)
 	return 0;
 }
 
+#ifdef CONFIG_PCI
+int board_pci_host_broken(void)
+{
+	struct immap __iomem *im = (struct immap __iomem *)CONFIG_SYS_IMMR;
+	const u32 rcw_mask = HRCWH_PCI1_ARBITER_ENABLE | HRCWH_PCI_HOST;
+	const char *pci_ea = getenv("pci_external_arbiter");
+
+	/* It's always OK in case of external arbiter. */
+	if (pci_ea && !strcmp(pci_ea, "yes"))
+		return 0;
+
+	if ((in_be32(&im->reset.rcwh) & rcw_mask) != rcw_mask)
+		return 1;
+
+	return 0;
+}
+
+static void ft_pci_fixup(void *blob, bd_t *bd)
+{
+	const char *status = "broken (no arbiter)";
+	int off;
+	int err;
+
+	off = fdt_path_offset(blob, "pci0");
+	if (off < 0) {
+		printf("WARNING: could not find pci0 alias: %s.\n",
+			fdt_strerror(off));
+		return;
+	}
+
+	err = fdt_setprop(blob, off, "status", status, strlen(status) + 1);
+	if (err) {
+		printf("WARNING: could not set status for pci0: %s.\n",
+			fdt_strerror(err));
+		return;
+	}
+}
+#endif
+
 #if defined(CONFIG_OF_BOARD_SETUP)
 void ft_board_setup(void *blob, bd_t *bd)
 {
 	ft_cpu_setup(blob, bd);
+	ft_tsec_fixup(blob, bd);
+	fdt_fixup_dr_usb(blob, bd);
 #ifdef CONFIG_PCI
 	ft_pci_setup(blob, bd);
+	if (board_pci_host_broken())
+		ft_pci_fixup(blob, bd);
 #endif
 }
 #endif /* CONFIG_OF_BOARD_SETUP */
diff --git a/board/freescale/mpc837xemds/pci.c b/board/freescale/mpc837xemds/pci.c
index ab909790e..df4e748e9 100644
--- a/board/freescale/mpc837xemds/pci.c
+++ b/board/freescale/mpc837xemds/pci.c
@@ -21,41 +21,44 @@
 #if defined(CONFIG_PCI)
 static struct pci_region pci_regions[] = {
 	{
-		bus_start: CFG_PCI_MEM_BASE,
-		phys_start: CFG_PCI_MEM_PHYS,
-		size: CFG_PCI_MEM_SIZE,
+		bus_start: CONFIG_SYS_PCI_MEM_BASE,
+		phys_start: CONFIG_SYS_PCI_MEM_PHYS,
+		size: CONFIG_SYS_PCI_MEM_SIZE,
 		flags: PCI_REGION_MEM | PCI_REGION_PREFETCH
 	},
 	{
-		bus_start: CFG_PCI_MMIO_BASE,
-		phys_start: CFG_PCI_MMIO_PHYS,
-		size: CFG_PCI_MMIO_SIZE,
+		bus_start: CONFIG_SYS_PCI_MMIO_BASE,
+		phys_start: CONFIG_SYS_PCI_MMIO_PHYS,
+		size: CONFIG_SYS_PCI_MMIO_SIZE,
 		flags: PCI_REGION_MEM
 	},
 	{
-		bus_start: CFG_PCI_IO_BASE,
-		phys_start: CFG_PCI_IO_PHYS,
-		size: CFG_PCI_IO_SIZE,
+		bus_start: CONFIG_SYS_PCI_IO_BASE,
+		phys_start: CONFIG_SYS_PCI_IO_PHYS,
+		size: CONFIG_SYS_PCI_IO_SIZE,
 		flags: PCI_REGION_IO
 	}
 };
 
 void pci_init_board(void)
 {
-	volatile immap_t *immr = (volatile immap_t *)CFG_IMMR;
+	volatile immap_t *immr = (volatile immap_t *)CONFIG_SYS_IMMR;
 	volatile clk83xx_t *clk = (volatile clk83xx_t *)&immr->clk;
 	volatile law83xx_t *pci_law = immr->sysconf.pcilaw;
 	struct pci_region *reg[] = { pci_regions };
 
+	if (board_pci_host_broken())
+		return;
+
 	/* Enable all 5 PCI_CLK_OUTPUTS */
 	clk->occr |= 0xf8000000;
 	udelay(2000);
 
 	/* Configure PCI Local Access Windows */
-	pci_law[0].bar = CFG_PCI_MEM_PHYS & LAWBAR_BAR;
+	pci_law[0].bar = CONFIG_SYS_PCI_MEM_PHYS & LAWBAR_BAR;
 	pci_law[0].ar = LBLAWAR_EN | LBLAWAR_512MB;
 
-	pci_law[1].bar = CFG_PCI_IO_PHYS & LAWBAR_BAR;
+	pci_law[1].bar = CONFIG_SYS_PCI_IO_PHYS & LAWBAR_BAR;
 	pci_law[1].ar = LBLAWAR_EN | LBLAWAR_1MB;
 
 	udelay(2000);
diff --git a/board/freescale/mpc837xerdb/mpc837xerdb.c b/board/freescale/mpc837xerdb/mpc837xerdb.c
index aaefc1899..318a3dce7 100644
--- a/board/freescale/mpc837xerdb/mpc837xerdb.c
+++ b/board/freescale/mpc837xerdb/mpc837xerdb.c
@@ -20,17 +20,17 @@
 #include <spd_sdram.h>
 #include <vsc7385.h>
 
-#if defined(CFG_DRAM_TEST)
+#if defined(CONFIG_SYS_DRAM_TEST)
 int
 testdram(void)
 {
-	uint *pstart = (uint *) CFG_MEMTEST_START;
-	uint *pend = (uint *) CFG_MEMTEST_END;
+	uint *pstart = (uint *) CONFIG_SYS_MEMTEST_START;
+	uint *pend = (uint *) CONFIG_SYS_MEMTEST_END;
 	uint *p;
 
 	printf("Testing DRAM from 0x%08x to 0x%08x\n",
-	       CFG_MEMTEST_START,
-	       CFG_MEMTEST_END);
+	       CONFIG_SYS_MEMTEST_START,
+	       CONFIG_SYS_MEMTEST_END);
 
 	printf("DRAM test phase 1:\n");
 	for (p = pstart; p < pend; p++)
@@ -66,7 +66,7 @@ int fixed_sdram(void);
 
 phys_size_t initdram(int board_type)
 {
-	immap_t *im = (immap_t *) CFG_IMMR;
+	immap_t *im = (immap_t *) CONFIG_SYS_IMMR;
 	u32 msize = 0;
 
 	if ((im->sysconf.immrbar & IMMRBAR_BASE_ADDR) != (u32) im)
@@ -92,40 +92,40 @@ phys_size_t initdram(int board_type)
  ************************************************************************/
 int fixed_sdram(void)
 {
-	immap_t *im = (immap_t *) CFG_IMMR;
-	u32 msize = CFG_DDR_SIZE * 1024 * 1024;
+	immap_t *im = (immap_t *) CONFIG_SYS_IMMR;
+	u32 msize = CONFIG_SYS_DDR_SIZE * 1024 * 1024;
 	u32 msize_log2 = __ilog2(msize);
 
-	im->sysconf.ddrlaw[0].bar = CFG_DDR_SDRAM_BASE >> 12;
+	im->sysconf.ddrlaw[0].bar = CONFIG_SYS_DDR_SDRAM_BASE & 0xfffff000;
 	im->sysconf.ddrlaw[0].ar = LBLAWAR_EN | (msize_log2 - 1);
 
-	im->sysconf.ddrcdr = CFG_DDRCDR_VALUE;
+	im->sysconf.ddrcdr = CONFIG_SYS_DDRCDR_VALUE;
 	udelay(50000);
 
-	im->ddr.sdram_clk_cntl = CFG_DDR_SDRAM_CLK_CNTL;
+	im->ddr.sdram_clk_cntl = CONFIG_SYS_DDR_SDRAM_CLK_CNTL;
 	udelay(1000);
 
-	im->ddr.csbnds[0].csbnds = CFG_DDR_CS0_BNDS;
-	im->ddr.cs_config[0] = CFG_DDR_CS0_CONFIG;
+	im->ddr.csbnds[0].csbnds = CONFIG_SYS_DDR_CS0_BNDS;
+	im->ddr.cs_config[0] = CONFIG_SYS_DDR_CS0_CONFIG;
 	udelay(1000);
 
-	im->ddr.timing_cfg_0 = CFG_DDR_TIMING_0;
-	im->ddr.timing_cfg_1 = CFG_DDR_TIMING_1;
-	im->ddr.timing_cfg_2 = CFG_DDR_TIMING_2;
-	im->ddr.timing_cfg_3 = CFG_DDR_TIMING_3;
-	im->ddr.sdram_cfg = CFG_DDR_SDRAM_CFG;
-	im->ddr.sdram_cfg2 = CFG_DDR_SDRAM_CFG2;
-	im->ddr.sdram_mode = CFG_DDR_MODE;
-	im->ddr.sdram_mode2 = CFG_DDR_MODE2;
-	im->ddr.sdram_interval = CFG_DDR_INTERVAL;
+	im->ddr.timing_cfg_0 = CONFIG_SYS_DDR_TIMING_0;
+	im->ddr.timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1;
+	im->ddr.timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2;
+	im->ddr.timing_cfg_3 = CONFIG_SYS_DDR_TIMING_3;
+	im->ddr.sdram_cfg = CONFIG_SYS_DDR_SDRAM_CFG;
+	im->ddr.sdram_cfg2 = CONFIG_SYS_DDR_SDRAM_CFG2;
+	im->ddr.sdram_mode = CONFIG_SYS_DDR_MODE;
+	im->ddr.sdram_mode2 = CONFIG_SYS_DDR_MODE2;
+	im->ddr.sdram_interval = CONFIG_SYS_DDR_INTERVAL;
 	sync();
 	udelay(1000);
 
 	im->ddr.sdram_cfg |= SDRAM_CFG_MEM_EN;
 	udelay(2000);
-	return CFG_DDR_SIZE;
+	return CONFIG_SYS_DDR_SIZE;
 }
-#endif	/*!CFG_SPD_EEPROM */
+#endif	/*!CONFIG_SYS_SPD_EEPROM */
 
 int checkboard(void)
 {
@@ -136,7 +136,7 @@ int checkboard(void)
 int board_early_init_f(void)
 {
 #ifdef CONFIG_FSL_SERDES
-	immap_t *immr = (immap_t *)CFG_IMMR;
+	immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
 	u32 spridr = in_be32(&immr->sysconf.spridr);
 
 	/* we check only part num, and don't look for CPU revisions */
@@ -148,7 +148,7 @@ int board_early_init_f(void)
 				 FSL_SERDES_CLK_100, FSL_SERDES_VDD_1V);
 		break;
 	case SPR_8378:
-		fsl_setup_serdes(CONFIG_FSL_SERDES1, FSL_SERDES_PROTO_PEX,
+		fsl_setup_serdes(CONFIG_FSL_SERDES2, FSL_SERDES_PROTO_PEX,
 				 FSL_SERDES_CLK_100, FSL_SERDES_VDD_1V);
 		break;
 	case SPR_8379:
diff --git a/board/freescale/mpc837xerdb/pci.c b/board/freescale/mpc837xerdb/pci.c
index 26e732028..8bb31fc74 100644
--- a/board/freescale/mpc837xerdb/pci.c
+++ b/board/freescale/mpc837xerdb/pci.c
@@ -17,28 +17,28 @@
 #if defined(CONFIG_PCI)
 static struct pci_region pci_regions[] = {
 	{
-		bus_start: CFG_PCI_MEM_BASE,
-		phys_start: CFG_PCI_MEM_PHYS,
-		size: CFG_PCI_MEM_SIZE,
+		bus_start: CONFIG_SYS_PCI_MEM_BASE,
+		phys_start: CONFIG_SYS_PCI_MEM_PHYS,
+		size: CONFIG_SYS_PCI_MEM_SIZE,
 		flags: PCI_REGION_MEM | PCI_REGION_PREFETCH
 	},
 	{
-		bus_start: CFG_PCI_MMIO_BASE,
-		phys_start: CFG_PCI_MMIO_PHYS,
-		size: CFG_PCI_MMIO_SIZE,
+		bus_start: CONFIG_SYS_PCI_MMIO_BASE,
+		phys_start: CONFIG_SYS_PCI_MMIO_PHYS,
+		size: CONFIG_SYS_PCI_MMIO_SIZE,
 		flags: PCI_REGION_MEM
 	},
 	{
-		bus_start: CFG_PCI_IO_BASE,
-		phys_start: CFG_PCI_IO_PHYS,
-		size: CFG_PCI_IO_SIZE,
+		bus_start: CONFIG_SYS_PCI_IO_BASE,
+		phys_start: CONFIG_SYS_PCI_IO_PHYS,
+		size: CONFIG_SYS_PCI_IO_SIZE,
 		flags: PCI_REGION_IO
 	}
 };
 
 void pci_init_board(void)
 {
-	volatile immap_t *immr = (volatile immap_t *)CFG_IMMR;
+	volatile immap_t *immr = (volatile immap_t *)CONFIG_SYS_IMMR;
 	volatile clk83xx_t *clk = (volatile clk83xx_t *)&immr->clk;
 	volatile law83xx_t *pci_law = immr->sysconf.pcilaw;
 	struct pci_region *reg[] = { pci_regions };
@@ -48,10 +48,10 @@ void pci_init_board(void)
 	udelay(2000);
 
 	/* Configure PCI Local Access Windows */
-	pci_law[0].bar = CFG_PCI_MEM_PHYS & LAWBAR_BAR;
+	pci_law[0].bar = CONFIG_SYS_PCI_MEM_PHYS & LAWBAR_BAR;
 	pci_law[0].ar = LBLAWAR_EN | LBLAWAR_512MB;
 
-	pci_law[1].bar = CFG_PCI_IO_PHYS & LAWBAR_BAR;
+	pci_law[1].bar = CONFIG_SYS_PCI_IO_PHYS & LAWBAR_BAR;
 	pci_law[1].ar = LBLAWAR_EN | LBLAWAR_1MB;
 
 	mpc83xx_pci_init(1, reg, 0);
diff --git a/board/freescale/mpc8536ds/ddr.c b/board/freescale/mpc8536ds/ddr.c
index 2e88c7933..3135d6dfe 100644
--- a/board/freescale/mpc8536ds/ddr.c
+++ b/board/freescale/mpc8536ds/ddr.c
@@ -10,6 +10,7 @@
 #include <i2c.h>
 
 #include <asm/fsl_ddr_sdram.h>
+#include <asm/fsl_ddr_dimm_params.h>
 
 static void get_spd(ddr2_spd_eeprom_t *spd, unsigned char i2c_address)
 {
@@ -36,7 +37,9 @@ void fsl_ddr_get_spd(ddr2_spd_eeprom_t *ctrl_dimms_spd,
 	}
 }
 
-void fsl_ddr_board_options(memctl_options_t *popts, unsigned int ctrl_num)
+void fsl_ddr_board_options(memctl_options_t *popts,
+				dimm_params_t *pdimm,
+				unsigned int ctrl_num)
 {
 	/*
 	 * Factors to consider for clock adjust:
diff --git a/board/freescale/mpc8536ds/law.c b/board/freescale/mpc8536ds/law.c
index cdf5215fc..0861fa708 100644
--- a/board/freescale/mpc8536ds/law.c
+++ b/board/freescale/mpc8536ds/law.c
@@ -28,16 +28,17 @@
 #include <asm/mmu.h>
 
 struct law_entry law_table[] = {
-	SET_LAW(CFG_PCI1_MEM_PHYS, LAW_SIZE_256M, LAW_TRGT_IF_PCI),
-	SET_LAW(CFG_PCI1_IO_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_PCI),
-	SET_LAW(CFG_FLASH_BASE, LAW_SIZE_256M, LAW_TRGT_IF_LBC),
-	SET_LAW(CFG_PCIE1_MEM_PHYS, LAWAR_SIZE_128M, LAW_TRGT_IF_PCIE_1),
-	SET_LAW(CFG_PCIE1_IO_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_PCIE_1),
-	SET_LAW(CFG_PCIE2_MEM_PHYS, LAWAR_SIZE_128M, LAW_TRGT_IF_PCIE_2),
-	SET_LAW(CFG_PCIE2_IO_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_PCIE_2),
-	SET_LAW(CFG_PCIE3_MEM_PHYS, LAWAR_SIZE_512M, LAW_TRGT_IF_PCIE_3),
-	SET_LAW(CFG_PCIE3_IO_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_PCIE_3),
+	SET_LAW(CONFIG_SYS_PCI1_MEM_PHYS, LAW_SIZE_256M, LAW_TRGT_IF_PCI),
+	SET_LAW(CONFIG_SYS_PCI1_IO_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_PCI),
+	SET_LAW(CONFIG_SYS_FLASH_BASE, LAW_SIZE_256M, LAW_TRGT_IF_LBC),
+	SET_LAW(CONFIG_SYS_PCIE1_MEM_PHYS, LAWAR_SIZE_128M, LAW_TRGT_IF_PCIE_1),
+	SET_LAW(CONFIG_SYS_PCIE1_IO_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_PCIE_1),
+	SET_LAW(CONFIG_SYS_PCIE2_MEM_PHYS, LAWAR_SIZE_128M, LAW_TRGT_IF_PCIE_2),
+	SET_LAW(CONFIG_SYS_PCIE2_IO_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_PCIE_2),
+	SET_LAW(CONFIG_SYS_PCIE3_MEM_PHYS, LAWAR_SIZE_512M, LAW_TRGT_IF_PCIE_3),
+	SET_LAW(CONFIG_SYS_PCIE3_IO_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_PCIE_3),
 	SET_LAW(PIXIS_BASE, LAW_SIZE_4K, LAW_TRGT_IF_LBC),
+	SET_LAW(CONFIG_SYS_NAND_BASE_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_LBC),
 };
 
 int num_law_entries = ARRAY_SIZE(law_table);
diff --git a/board/freescale/mpc8536ds/mpc8536ds.c b/board/freescale/mpc8536ds/mpc8536ds.c
index 8216c70ca..2b17612b3 100644
--- a/board/freescale/mpc8536ds/mpc8536ds.c
+++ b/board/freescale/mpc8536ds/mpc8536ds.c
@@ -25,6 +25,7 @@
 #include <pci.h>
 #include <asm/processor.h>
 #include <asm/mmu.h>
+#include <asm/cache.h>
 #include <asm/immap_85xx.h>
 #include <asm/immap_fsl_pci.h>
 #include <asm/fsl_ddr_sdram.h>
@@ -34,12 +35,11 @@
 #include <libfdt.h>
 #include <spd_sdram.h>
 #include <fdt_support.h>
+#include <tsec.h>
+#include <netdev.h>
 
 #include "../common/pixis.h"
-
-#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
-extern void ddr_enable_ecc(unsigned int dram_size);
-#endif
+#include "../common/sgmii_riser.h"
 
 phys_size_t fixed_sdram(void);
 
@@ -61,20 +61,12 @@ initdram(int board_type)
 
 #ifdef CONFIG_SPD_EEPROM
 	dram_size = fsl_ddr_sdram();
-
-	dram_size = setup_ddr_tlbs(dram_size / 0x100000);
-
-	dram_size *= 0x100000;
 #else
 	dram_size = fixed_sdram();
 #endif
+	dram_size = setup_ddr_tlbs(dram_size / 0x100000);
+	dram_size *= 0x100000;
 
-#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
-	/*
-	 * Initialize and enable DDR ECC.
-	 */
-	ddr_enable_ecc(dram_size);
-#endif
 	puts("    DDR: ");
 	return dram_size;
 }
@@ -86,34 +78,34 @@ initdram(int board_type)
 
 phys_size_t fixed_sdram (void)
 {
-	volatile immap_t *immap = (immap_t *)CFG_IMMR;
+	volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR;
 	volatile ccsr_ddr_t *ddr= &immap->im_ddr;
 	uint d_init;
 
-	ddr->cs0_bnds = CFG_DDR_CS0_BNDS;
-	ddr->cs0_config = CFG_DDR_CS0_CONFIG;
+	ddr->cs0_bnds = CONFIG_SYS_DDR_CS0_BNDS;
+	ddr->cs0_config = CONFIG_SYS_DDR_CS0_CONFIG;
 
-	ddr->timing_cfg_3 = CFG_DDR_TIMING_3;
-	ddr->timing_cfg_0 = CFG_DDR_TIMING_0;
-	ddr->timing_cfg_1 = CFG_DDR_TIMING_1;
-	ddr->timing_cfg_2 = CFG_DDR_TIMING_2;
-	ddr->sdram_mode = CFG_DDR_MODE_1;
-	ddr->sdram_mode_2 = CFG_DDR_MODE_2;
-	ddr->sdram_interval = CFG_DDR_INTERVAL;
-	ddr->sdram_data_init = CFG_DDR_DATA_INIT;
-	ddr->sdram_clk_cntl = CFG_DDR_CLK_CTRL;
-	ddr->sdram_cfg_2 = CFG_DDR_CONTROL2;
+	ddr->timing_cfg_3 = CONFIG_SYS_DDR_TIMING_3;
+	ddr->timing_cfg_0 = CONFIG_SYS_DDR_TIMING_0;
+	ddr->timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1;
+	ddr->timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2;
+	ddr->sdram_mode = CONFIG_SYS_DDR_MODE_1;
+	ddr->sdram_mode_2 = CONFIG_SYS_DDR_MODE_2;
+	ddr->sdram_interval = CONFIG_SYS_DDR_INTERVAL;
+	ddr->sdram_data_init = CONFIG_SYS_DDR_DATA_INIT;
+	ddr->sdram_clk_cntl = CONFIG_SYS_DDR_CLK_CTRL;
+	ddr->sdram_cfg_2 = CONFIG_SYS_DDR_CONTROL2;
 
 #if defined (CONFIG_DDR_ECC)
-	ddr->err_int_en = CFG_DDR_ERR_INT_EN;
-	ddr->err_disable = CFG_DDR_ERR_DIS;
-	ddr->err_sbe = CFG_DDR_SBE;
+	ddr->err_int_en = CONFIG_SYS_DDR_ERR_INT_EN;
+	ddr->err_disable = CONFIG_SYS_DDR_ERR_DIS;
+	ddr->err_sbe = CONFIG_SYS_DDR_SBE;
 #endif
 	asm("sync;isync");
 
 	udelay(500);
 
-	ddr->sdram_cfg = CFG_DDR_CONTROL;
+	ddr->sdram_cfg = CONFIG_SYS_DDR_CONTROL;
 
 #if defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
 	d_init = 1;
@@ -151,12 +143,15 @@ static struct pci_controller pcie2_hose;
 static struct pci_controller pcie3_hose;
 #endif
 
+extern int fsl_pci_setup_inbound_windows(struct pci_region *r);
+extern void fsl_pci_init(struct pci_controller *hose);
+
 int first_free_busno=0;
 
 void
 pci_init_board(void)
 {
-	volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR);
+	volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
 	uint devdisr = gur->devdisr;
 	uint sdrs2_io_sel =
 		(gur->pordevsr & MPC85xx_PORDEVSR_SRDS2_IO_SEL) >> 27;
@@ -176,11 +171,11 @@ pci_init_board(void)
 
 #ifdef CONFIG_PCIE3
 {
-	volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CFG_PCIE3_ADDR;
-	extern void fsl_pci_init(struct pci_controller *hose);
+	volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCIE3_ADDR;
 	struct pci_controller *hose = &pcie3_hose;
 	int pcie_ep = (host_agent == 1);
 	int pcie_configured  = (io_sel == 7);
+	struct pci_region *r = hose->regions;
 
 	if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE)){
 		printf ("\n    PCIE3 connected to Slot3 as %s (base address %x)",
@@ -193,27 +188,23 @@ pci_init_board(void)
 		printf ("\n");
 
 		/* inbound */
-		pci_set_region(hose->regions + 0,
-			       CFG_PCI_MEMORY_BUS,
-			       CFG_PCI_MEMORY_PHYS,
-			       CFG_PCI_MEMORY_SIZE,
-			       PCI_REGION_MEM | PCI_REGION_MEMORY);
+		r += fsl_pci_setup_inbound_windows(r);
 
 		/* outbound memory */
-		pci_set_region(hose->regions + 1,
-			       CFG_PCIE3_MEM_BASE,
-			       CFG_PCIE3_MEM_PHYS,
-			       CFG_PCIE3_MEM_SIZE,
+		pci_set_region(r++,
+			       CONFIG_SYS_PCIE3_MEM_BASE,
+			       CONFIG_SYS_PCIE3_MEM_PHYS,
+			       CONFIG_SYS_PCIE3_MEM_SIZE,
 			       PCI_REGION_MEM);
 
 		/* outbound io */
-		pci_set_region(hose->regions + 2,
-			       CFG_PCIE3_IO_BASE,
-			       CFG_PCIE3_IO_PHYS,
-			       CFG_PCIE3_IO_SIZE,
+		pci_set_region(r++,
+			       CONFIG_SYS_PCIE3_IO_BASE,
+			       CONFIG_SYS_PCIE3_IO_PHYS,
+			       CONFIG_SYS_PCIE3_IO_SIZE,
 			       PCI_REGION_IO);
 
-		hose->region_count = 3;
+		hose->region_count = r - hose->regions;
 
 		hose->first_busno=first_free_busno;
 		pci_setup_indirect(hose, (int) &pci->cfg_addr, (int) &pci->cfg_data);
@@ -234,12 +225,12 @@ pci_init_board(void)
 
 #ifdef CONFIG_PCIE1
  {
-	volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CFG_PCIE1_ADDR;
-	extern void fsl_pci_init(struct pci_controller *hose);
+	volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCIE1_ADDR;
 	struct pci_controller *hose = &pcie1_hose;
 	int pcie_ep = (host_agent == 5);
 	int pcie_configured  = (io_sel == 2 || io_sel == 3
 				|| io_sel == 5 || io_sel == 7);
+	struct pci_region *r = hose->regions;
 
 	if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE)){
 		printf ("\n    PCIE1 connected to Slot1 as %s (base address %x)",
@@ -252,36 +243,31 @@ pci_init_board(void)
 		printf ("\n");
 
 		/* inbound */
-		pci_set_region(hose->regions + 0,
-			       CFG_PCI_MEMORY_BUS,
-			       CFG_PCI_MEMORY_PHYS,
-			       CFG_PCI_MEMORY_SIZE,
-			       PCI_REGION_MEM | PCI_REGION_MEMORY);
+		r += fsl_pci_setup_inbound_windows(r);
 
 		/* outbound memory */
-		pci_set_region(hose->regions + 1,
-			       CFG_PCIE1_MEM_BASE,
-			       CFG_PCIE1_MEM_PHYS,
-			       CFG_PCIE1_MEM_SIZE,
+		pci_set_region(r++,
+			       CONFIG_SYS_PCIE1_MEM_BASE,
+			       CONFIG_SYS_PCIE1_MEM_PHYS,
+			       CONFIG_SYS_PCIE1_MEM_SIZE,
 			       PCI_REGION_MEM);
 
 		/* outbound io */
-		pci_set_region(hose->regions + 2,
-			       CFG_PCIE1_IO_BASE,
-			       CFG_PCIE1_IO_PHYS,
-			       CFG_PCIE1_IO_SIZE,
+		pci_set_region(r++,
+			       CONFIG_SYS_PCIE1_IO_BASE,
+			       CONFIG_SYS_PCIE1_IO_PHYS,
+			       CONFIG_SYS_PCIE1_IO_SIZE,
 			       PCI_REGION_IO);
 
-		hose->region_count = 3;
-#ifdef CFG_PCIE1_MEM_BASE2
+#ifdef CONFIG_SYS_PCIE1_MEM_BASE2
 		/* outbound memory */
-		pci_set_region(hose->regions + 3,
-			       CFG_PCIE1_MEM_BASE2,
-			       CFG_PCIE1_MEM_PHYS2,
-			       CFG_PCIE1_MEM_SIZE2,
+		pci_set_region(r++,
+			       CONFIG_SYS_PCIE1_MEM_BASE2,
+			       CONFIG_SYS_PCIE1_MEM_PHYS2,
+			       CONFIG_SYS_PCIE1_MEM_SIZE2,
 			       PCI_REGION_MEM);
-		hose->region_count++;
 #endif
+		hose->region_count = r - hose->regions;
 		hose->first_busno=first_free_busno;
 
 		pci_setup_indirect(hose, (int) &pci->cfg_addr, (int) &pci->cfg_data);
@@ -303,11 +289,11 @@ pci_init_board(void)
 
 #ifdef CONFIG_PCIE2
  {
-	volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CFG_PCIE2_ADDR;
-	extern void fsl_pci_init(struct pci_controller *hose);
+	volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCIE2_ADDR;
 	struct pci_controller *hose = &pcie2_hose;
 	int pcie_ep = (host_agent == 3);
 	int pcie_configured  = (io_sel == 5 || io_sel == 7);
+	struct pci_region *r = hose->regions;
 
 	if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE)){
 		printf ("\n    PCIE2 connected to Slot 2 as %s (base address %x)",
@@ -320,36 +306,31 @@ pci_init_board(void)
 		printf ("\n");
 
 		/* inbound */
-		pci_set_region(hose->regions + 0,
-			       CFG_PCI_MEMORY_BUS,
-			       CFG_PCI_MEMORY_PHYS,
-			       CFG_PCI_MEMORY_SIZE,
-			       PCI_REGION_MEM | PCI_REGION_MEMORY);
+		r += fsl_pci_setup_inbound_windows(r);
 
 		/* outbound memory */
-		pci_set_region(hose->regions + 1,
-			       CFG_PCIE2_MEM_BASE,
-			       CFG_PCIE2_MEM_PHYS,
-			       CFG_PCIE2_MEM_SIZE,
+		pci_set_region(r++,
+			       CONFIG_SYS_PCIE2_MEM_BASE,
+			       CONFIG_SYS_PCIE2_MEM_PHYS,
+			       CONFIG_SYS_PCIE2_MEM_SIZE,
 			       PCI_REGION_MEM);
 
 		/* outbound io */
-		pci_set_region(hose->regions + 2,
-			       CFG_PCIE2_IO_BASE,
-			       CFG_PCIE2_IO_PHYS,
-			       CFG_PCIE2_IO_SIZE,
+		pci_set_region(r++,
+			       CONFIG_SYS_PCIE2_IO_BASE,
+			       CONFIG_SYS_PCIE2_IO_PHYS,
+			       CONFIG_SYS_PCIE2_IO_SIZE,
 			       PCI_REGION_IO);
 
-		hose->region_count = 3;
-#ifdef CFG_PCIE2_MEM_BASE2
+#ifdef CONFIG_SYS_PCIE2_MEM_BASE2
 		/* outbound memory */
-		pci_set_region(hose->regions + 3,
-			       CFG_PCIE2_MEM_BASE2,
-			       CFG_PCIE2_MEM_PHYS2,
-			       CFG_PCIE2_MEM_SIZE2,
+		pci_set_region(r++,
+			       CONFIG_SYS_PCIE2_MEM_BASE2,
+			       CONFIG_SYS_PCIE2_MEM_PHYS2,
+			       CONFIG_SYS_PCIE2_MEM_SIZE2,
 			       PCI_REGION_MEM);
-		hose->region_count++;
 #endif
+		hose->region_count = r - hose->regions;
 		hose->first_busno=first_free_busno;
 		pci_setup_indirect(hose, (int) &pci->cfg_addr, (int) &pci->cfg_data);
 
@@ -370,9 +351,9 @@ pci_init_board(void)
 
 #ifdef CONFIG_PCI1
 {
-	volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CFG_PCI1_ADDR;
-	extern void fsl_pci_init(struct pci_controller *hose);
+	volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCI1_ADDR;
 	struct pci_controller *hose = &pci1_hose;
+	struct pci_region *r = hose->regions;
 
 	uint pci_agent = (host_agent == 6);
 	uint pci_speed = 66666000; /*get_clock_freq (); PCI PSPEED in [4:5] */
@@ -393,35 +374,31 @@ pci_init_board(void)
 			);
 
 		/* inbound */
-		pci_set_region(hose->regions + 0,
-			       CFG_PCI_MEMORY_BUS,
-			       CFG_PCI_MEMORY_PHYS,
-			       CFG_PCI_MEMORY_SIZE,
-			       PCI_REGION_MEM | PCI_REGION_MEMORY);
+		r += fsl_pci_setup_inbound_windows(r);
 
 		/* outbound memory */
-		pci_set_region(hose->regions + 1,
-			       CFG_PCI1_MEM_BASE,
-			       CFG_PCI1_MEM_PHYS,
-			       CFG_PCI1_MEM_SIZE,
+		pci_set_region(r++,
+			       CONFIG_SYS_PCI1_MEM_BASE,
+			       CONFIG_SYS_PCI1_MEM_PHYS,
+			       CONFIG_SYS_PCI1_MEM_SIZE,
 			       PCI_REGION_MEM);
 
 		/* outbound io */
-		pci_set_region(hose->regions + 2,
-			       CFG_PCI1_IO_BASE,
-			       CFG_PCI1_IO_PHYS,
-			       CFG_PCI1_IO_SIZE,
+		pci_set_region(r++,
+			       CONFIG_SYS_PCI1_IO_BASE,
+			       CONFIG_SYS_PCI1_IO_PHYS,
+			       CONFIG_SYS_PCI1_IO_SIZE,
 			       PCI_REGION_IO);
-		hose->region_count = 3;
-#ifdef CFG_PCI1_MEM_BASE2
+
+#ifdef CONFIG_SYS_PCI1_MEM_BASE2
 		/* outbound memory */
-		pci_set_region(hose->regions + 3,
-			       CFG_PCI1_MEM_BASE2,
-			       CFG_PCI1_MEM_PHYS2,
-			       CFG_PCI1_MEM_SIZE2,
+		pci_set_region(r++,
+			       CONFIG_SYS_PCI1_MEM_BASE2,
+			       CONFIG_SYS_PCI1_MEM_PHYS2,
+			       CONFIG_SYS_PCI1_MEM_SIZE2,
 			       PCI_REGION_MEM);
-		hose->region_count++;
 #endif
+		hose->region_count = r - hose->regions;
 		hose->first_busno=first_free_busno;
 		pci_setup_indirect(hose, (int) &pci->cfg_addr, (int) &pci->cfg_data);
 
@@ -441,8 +418,7 @@ pci_init_board(void)
 
 int board_early_init_r(void)
 {
-	unsigned int i;
-	const unsigned int flashbase = CFG_FLASH_BASE;
+	const unsigned int flashbase = CONFIG_SYS_FLASH_BASE;
 	const u8 flash_esel = 1;
 
 	/*
@@ -450,11 +426,9 @@ int board_early_init_r(void)
 	 * so that flash can be erased properly.
 	 */
 
-	/* Invalidate any remaining lines of the flash from caches. */
-	for (i = 0; i < 256*1024*1024; i+=32) {
-		asm volatile ("dcbi %0,%1": : "b" (flashbase), "r" (i));
-		asm volatile ("icbi %0,%1": : "b" (flashbase), "r" (i));
-	}
+	/* Flush d-cache and invalidate i-cache of any FLASH data */
+	flush_dcache();
+	invalidate_icache();
 
 	/* invalidate existing TLB entry for flash + promjet */
 	disable_tlb(flash_esel);
@@ -608,46 +582,75 @@ get_board_ddr_clk(ulong dummy)
 }
 #endif
 
-#if defined(CONFIG_OF_BOARD_SETUP)
-void
-ft_board_setup(void *blob, bd_t *bd)
+int is_sata_supported(void)
+{
+	volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+	uint sdrs2_io_sel =
+		(gur->pordevsr & MPC85xx_PORDEVSR_SRDS2_IO_SEL) >> 27;
+	if (sdrs2_io_sel & 0x04)
+		return 0;
+
+	return 1;
+}
+
+int board_eth_init(bd_t *bis)
 {
-	int node, tmp[2];
-	const char *path;
+#ifdef CONFIG_TSEC_ENET
+	struct tsec_info_struct tsec_info[2];
+	volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+	int num = 0;
+	uint sdrs2_io_sel =
+		(gur->pordevsr & MPC85xx_PORDEVSR_SRDS2_IO_SEL) >> 27;
 
+#ifdef CONFIG_TSEC1
+	SET_STD_TSEC_INFO(tsec_info[num], 1);
+	if ((sdrs2_io_sel == 4) || (sdrs2_io_sel == 6)) {
+		tsec_info[num].phyaddr = 0;
+		tsec_info[num].flags |= TSEC_SGMII;
+	}
+	num++;
+#endif
+#ifdef CONFIG_TSEC3
+	SET_STD_TSEC_INFO(tsec_info[num], 3);
+	if (sdrs2_io_sel == 4) {
+		tsec_info[num].phyaddr = 1;
+		tsec_info[num].flags |= TSEC_SGMII;
+	}
+	num++;
+#endif
+
+	if (!num) {
+		printf("No TSECs initialized\n");
+		return 0;
+	}
+
+	if ((sdrs2_io_sel == 4) || (sdrs2_io_sel == 6))
+		fsl_sgmii_riser_init(tsec_info, num);
+
+	tsec_eth_init(bis, tsec_info, num);
+#endif
+	return pci_eth_init(bis);
+}
+
+#if defined(CONFIG_OF_BOARD_SETUP)
+extern void ft_fsl_pci_setup(void *blob, const char *pci_alias,
+			struct pci_controller *hose);
+
+void ft_board_setup(void *blob, bd_t *bd)
+{
 	ft_cpu_setup(blob, bd);
 
-	node = fdt_path_offset(blob, "/aliases");
-	tmp[0] = 0;
-	if (node >= 0) {
 #ifdef CONFIG_PCI1
-		path = fdt_getprop(blob, node, "pci0", NULL);
-		if (path) {
-			tmp[1] = pci1_hose.last_busno - pci1_hose.first_busno;
-			do_fixup_by_path(blob, path, "bus-range", &tmp, 8, 1);
-		}
+	ft_fsl_pci_setup(blob, "pci0", &pci1_hose);
 #endif
 #ifdef CONFIG_PCIE2
-		path = fdt_getprop(blob, node, "pci1", NULL);
-		if (path) {
-			tmp[1] = pcie2_hose.last_busno - pcie2_hose.first_busno;
-			do_fixup_by_path(blob, path, "bus-range", &tmp, 8, 1);
-		}
+	ft_fsl_pci_setup(blob, "pci1", &pcie2_hose);
 #endif
-#ifdef CONFIG_PCIE1
-		path = fdt_getprop(blob, node, "pci2", NULL);
-		if (path) {
-			tmp[1] = pcie1_hose.last_busno - pcie1_hose.first_busno;
-			do_fixup_by_path(blob, path, "bus-range", &tmp, 8, 1);
-		}
+#ifdef CONFIG_PCIE2
+	ft_fsl_pci_setup(blob, "pci2", &pcie1_hose);
 #endif
-#ifdef CONFIG_PCIE3
-		path = fdt_getprop(blob, node, "pci3", NULL);
-		if (path) {
-			tmp[1] = pcie3_hose.last_busno - pcie3_hose.first_busno;
-			do_fixup_by_path(blob, path, "bus-range", &tmp, 8, 1);
-		}
+#ifdef CONFIG_PCIE1
+	ft_fsl_pci_setup(blob, "pci3", &pcie3_hose);
 #endif
-	}
 }
 #endif
diff --git a/board/freescale/mpc8536ds/tlb.c b/board/freescale/mpc8536ds/tlb.c
index 28a9fa87f..c81a95922 100644
--- a/board/freescale/mpc8536ds/tlb.c
+++ b/board/freescale/mpc8536ds/tlb.c
@@ -28,16 +28,16 @@
 
 struct fsl_e_tlb_entry tlb_table[] = {
 	/* TLB 0 - for temp stack in cache */
-	SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR, CFG_INIT_RAM_ADDR,
+	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR, CONFIG_SYS_INIT_RAM_ADDR,
 		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
 		      0, 0, BOOKE_PAGESZ_4K, 0),
-	SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR + 4 * 1024 , CFG_INIT_RAM_ADDR + 4 * 1024,
+	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024 , CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024,
 		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
 		      0, 0, BOOKE_PAGESZ_4K, 0),
-	SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR + 8 * 1024 , CFG_INIT_RAM_ADDR + 8 * 1024,
+	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024 , CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024,
 		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
 		      0, 0, BOOKE_PAGESZ_4K, 0),
-	SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR + 12 * 1024 , CFG_INIT_RAM_ADDR + 12 * 1024,
+	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024 , CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024,
 		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
 		      0, 0, BOOKE_PAGESZ_4K, 0),
 
@@ -47,25 +47,30 @@ struct fsl_e_tlb_entry tlb_table[] = {
 
 	/* TLB 1 */
 	/* *I*G* - CCSRBAR */
-	SET_TLB_ENTRY(1, CFG_CCSRBAR, CFG_CCSRBAR_PHYS,
+	SET_TLB_ENTRY(1, CONFIG_SYS_CCSRBAR, CONFIG_SYS_CCSRBAR_PHYS,
 		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 		      0, 0, BOOKE_PAGESZ_1M, 1),
 
 	/* W**G* - Flash/promjet, localbus */
 	/* This will be changed to *I*G* after relocation to RAM. */
-	SET_TLB_ENTRY(1, CFG_FLASH_BASE, CFG_FLASH_BASE,
-		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_W|MAS2_G,
+	SET_TLB_ENTRY(1, CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE,
+		      MAS3_SX|MAS3_SR, MAS2_W|MAS2_G,
 		      0, 1, BOOKE_PAGESZ_256M, 1),
 
 	/* *I*G* - PCI */
-	SET_TLB_ENTRY(1, CFG_PCI1_MEM_PHYS, CFG_PCI1_MEM_PHYS,
+	SET_TLB_ENTRY(1, CONFIG_SYS_PCI1_MEM_PHYS, CONFIG_SYS_PCI1_MEM_PHYS,
 		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 		      0, 2, BOOKE_PAGESZ_1G, 1),
 
 	/* *I*G* - PCI I/O */
-	SET_TLB_ENTRY(1, CFG_PCI1_IO_PHYS, CFG_PCI1_IO_PHYS,
+	SET_TLB_ENTRY(1, CONFIG_SYS_PCI1_IO_PHYS, CONFIG_SYS_PCI1_IO_PHYS,
 		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 		      0, 3, BOOKE_PAGESZ_256K, 1),
+
+	/* *I*G - NAND */
+	SET_TLB_ENTRY(1, CONFIG_SYS_NAND_BASE, CONFIG_SYS_NAND_BASE_PHYS,
+		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+		      0, 4, BOOKE_PAGESZ_1M, 1),
 };
 
 int num_tlb_entries = ARRAY_SIZE(tlb_table);
diff --git a/board/freescale/mpc8540ads/ddr.c b/board/freescale/mpc8540ads/ddr.c
index 45372f427..7850794d6 100644
--- a/board/freescale/mpc8540ads/ddr.c
+++ b/board/freescale/mpc8540ads/ddr.c
@@ -10,6 +10,7 @@
 #include <i2c.h>
 
 #include <asm/fsl_ddr_sdram.h>
+#include <asm/fsl_ddr_dimm_params.h>
 
 static void
 get_spd(ddr1_spd_eeprom_t *spd, unsigned char i2c_address)
@@ -40,7 +41,9 @@ fsl_ddr_get_spd(ddr1_spd_eeprom_t *ctrl_dimms_spd,
 	}
 }
 
-void fsl_ddr_board_options(memctl_options_t *popts, unsigned int ctrl_num)
+void fsl_ddr_board_options(memctl_options_t *popts,
+				dimm_params_t *pdimm,
+				unsigned int ctrl_num)
 {
 	/*
 	 * Factors to consider for CPO:
diff --git a/board/freescale/mpc8540ads/law.c b/board/freescale/mpc8540ads/law.c
index 3b8bd05ad..7dd8f2958 100644
--- a/board/freescale/mpc8540ads/law.c
+++ b/board/freescale/mpc8540ads/law.c
@@ -46,13 +46,13 @@
 
 struct law_entry law_table[] = {
 #ifndef CONFIG_SPD_EEPROM
-	SET_LAW(CFG_DDR_SDRAM_BASE, LAW_SIZE_128M, LAW_TRGT_IF_DDR),
+	SET_LAW(CONFIG_SYS_DDR_SDRAM_BASE, LAW_SIZE_128M, LAW_TRGT_IF_DDR),
 #endif
-	SET_LAW(CFG_PCI1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI),
+	SET_LAW(CONFIG_SYS_PCI1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI),
 	/* This is not so much the SDRAM map as it is the whole localbus map. */
-	SET_LAW(CFG_LBC_SDRAM_BASE, LAW_SIZE_256M, LAW_TRGT_IF_LBC),
-	SET_LAW(CFG_PCI1_IO_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_PCI),
-	SET_LAW(CFG_RIO_MEM_BASE, LAWAR_SIZE_512M, LAW_TRGT_IF_RIO),
+	SET_LAW(CONFIG_SYS_LBC_SDRAM_BASE, LAW_SIZE_256M, LAW_TRGT_IF_LBC),
+	SET_LAW(CONFIG_SYS_PCI1_IO_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_PCI),
+	SET_LAW(CONFIG_SYS_RIO_MEM_BASE, LAWAR_SIZE_512M, LAW_TRGT_IF_RIO),
 };
 
 int num_law_entries = ARRAY_SIZE(law_table);
diff --git a/board/freescale/mpc8540ads/mpc8540ads.c b/board/freescale/mpc8540ads/mpc8540ads.c
index 005e4d97e..a0b6fbd12 100644
--- a/board/freescale/mpc8540ads/mpc8540ads.c
+++ b/board/freescale/mpc8540ads/mpc8540ads.c
@@ -71,7 +71,7 @@ initdram(int board_type)
 
 #if defined(CONFIG_DDR_DLL)
 	{
-	    volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR);
+	    volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
 	    uint temp_ddrdll = 0;
 
 	    /*
@@ -116,8 +116,8 @@ initdram(int board_type)
 void
 local_bus_init(void)
 {
-	volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR);
-	volatile ccsr_lbc_t *lbc = (void *)(CFG_MPC85xx_LBC_ADDR);
+	volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+	volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR);
 
 	uint clkdiv;
 	uint lbc_hz;
@@ -127,8 +127,8 @@ local_bus_init(void)
 	 * Errata LBC11.
 	 * Fix Local Bus clock glitch when DLL is enabled.
 	 *
-	 * If localbus freq is < 66Mhz, DLL bypass mode must be used.
-	 * If localbus freq is > 133Mhz, DLL can be safely enabled.
+	 * If localbus freq is < 66MHz, DLL bypass mode must be used.
+	 * If localbus freq is > 133MHz, DLL can be safely enabled.
 	 * Between 66 and 133, the DLL is enabled with an override workaround.
 	 */
 
@@ -137,10 +137,10 @@ local_bus_init(void)
 	lbc_hz = sysinfo.freqSystemBus / 1000000 / clkdiv;
 
 	if (lbc_hz < 66) {
-		lbc->lcrr = CFG_LBC_LCRR | 0x80000000;	/* DLL Bypass */
+		lbc->lcrr = CONFIG_SYS_LBC_LCRR | 0x80000000;	/* DLL Bypass */
 
 	} else if (lbc_hz >= 133) {
-		lbc->lcrr = CFG_LBC_LCRR & (~0x80000000); /* DLL Enabled */
+		lbc->lcrr = CONFIG_SYS_LBC_LCRR & (~0x80000000); /* DLL Enabled */
 
 	} else {
 		/*
@@ -155,7 +155,7 @@ local_bus_init(void)
 			lbc->lcrr = 0x10000004;
 		}
 
-		lbc->lcrr = CFG_LBC_LCRR & (~0x80000000); /* DLL Enabled */
+		lbc->lcrr = CONFIG_SYS_LBC_LCRR & (~0x80000000); /* DLL Enabled */
 		udelay(200);
 
 		/*
@@ -176,52 +176,52 @@ local_bus_init(void)
 void
 sdram_init(void)
 {
-	volatile ccsr_lbc_t *lbc = (void *)(CFG_MPC85xx_LBC_ADDR);
-	uint *sdram_addr = (uint *)CFG_LBC_SDRAM_BASE;
+	volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR);
+	uint *sdram_addr = (uint *)CONFIG_SYS_LBC_SDRAM_BASE;
 
 	puts("    SDRAM: ");
-	print_size (CFG_LBC_SDRAM_SIZE * 1024 * 1024, "\n");
+	print_size (CONFIG_SYS_LBC_SDRAM_SIZE * 1024 * 1024, "\n");
 
 	/*
 	 * Setup SDRAM Base and Option Registers
 	 */
-	lbc->or2 = CFG_OR2_PRELIM;
-	lbc->br2 = CFG_BR2_PRELIM;
-	lbc->lbcr = CFG_LBC_LBCR;
+	lbc->or2 = CONFIG_SYS_OR2_PRELIM;
+	lbc->br2 = CONFIG_SYS_BR2_PRELIM;
+	lbc->lbcr = CONFIG_SYS_LBC_LBCR;
 	asm("msync");
 
-	lbc->lsrt = CFG_LBC_LSRT;
-	lbc->mrtpr = CFG_LBC_MRTPR;
+	lbc->lsrt = CONFIG_SYS_LBC_LSRT;
+	lbc->mrtpr = CONFIG_SYS_LBC_MRTPR;
 	asm("sync");
 
 	/*
 	 * Configure the SDRAM controller.
 	 */
-	lbc->lsdmr = CFG_LBC_LSDMR_1;
+	lbc->lsdmr = CONFIG_SYS_LBC_LSDMR_1;
 	asm("sync");
 	*sdram_addr = 0xff;
 	ppcDcbf((unsigned long) sdram_addr);
 	udelay(100);
 
-	lbc->lsdmr = CFG_LBC_LSDMR_2;
+	lbc->lsdmr = CONFIG_SYS_LBC_LSDMR_2;
 	asm("sync");
 	*sdram_addr = 0xff;
 	ppcDcbf((unsigned long) sdram_addr);
 	udelay(100);
 
-	lbc->lsdmr = CFG_LBC_LSDMR_3;
+	lbc->lsdmr = CONFIG_SYS_LBC_LSDMR_3;
 	asm("sync");
 	*sdram_addr = 0xff;
 	ppcDcbf((unsigned long) sdram_addr);
 	udelay(100);
 
-	lbc->lsdmr = CFG_LBC_LSDMR_4;
+	lbc->lsdmr = CONFIG_SYS_LBC_LSDMR_4;
 	asm("sync");
 	*sdram_addr = 0xff;
 	ppcDcbf((unsigned long) sdram_addr);
 	udelay(100);
 
-	lbc->lsdmr = CFG_LBC_LSDMR_5;
+	lbc->lsdmr = CONFIG_SYS_LBC_LSDMR_5;
 	asm("sync");
 	*sdram_addr = 0xff;
 	ppcDcbf((unsigned long) sdram_addr);
@@ -234,15 +234,15 @@ sdram_init(void)
  ************************************************************************/
 long int fixed_sdram (void)
 {
-  #ifndef CFG_RAMBOOT
-	volatile ccsr_ddr_t *ddr= (void *)(CFG_MPC85xx_DDR_ADDR);
-
-	ddr->cs0_bnds = CFG_DDR_CS0_BNDS;
-	ddr->cs0_config = CFG_DDR_CS0_CONFIG;
-	ddr->timing_cfg_1 = CFG_DDR_TIMING_1;
-	ddr->timing_cfg_2 = CFG_DDR_TIMING_2;
-	ddr->sdram_mode = CFG_DDR_MODE;
-	ddr->sdram_interval = CFG_DDR_INTERVAL;
+  #ifndef CONFIG_SYS_RAMBOOT
+	volatile ccsr_ddr_t *ddr= (void *)(CONFIG_SYS_MPC85xx_DDR_ADDR);
+
+	ddr->cs0_bnds = CONFIG_SYS_DDR_CS0_BNDS;
+	ddr->cs0_config = CONFIG_SYS_DDR_CS0_CONFIG;
+	ddr->timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1;
+	ddr->timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2;
+	ddr->sdram_mode = CONFIG_SYS_DDR_MODE;
+	ddr->sdram_interval = CONFIG_SYS_DDR_INTERVAL;
     #if defined (CONFIG_DDR_ECC)
 	ddr->err_disable = 0x0000000D;
 	ddr->err_sbe = 0x00ff0000;
@@ -251,14 +251,14 @@ long int fixed_sdram (void)
 	udelay(500);
     #if defined (CONFIG_DDR_ECC)
 	/* Enable ECC checking */
-	ddr->sdram_cfg = (CFG_DDR_CONTROL | 0x20000000);
+	ddr->sdram_cfg = (CONFIG_SYS_DDR_CONTROL | 0x20000000);
     #else
-	ddr->sdram_cfg = CFG_DDR_CONTROL;
+	ddr->sdram_cfg = CONFIG_SYS_DDR_CONTROL;
     #endif
 	asm("sync; isync; msync");
 	udelay(500);
   #endif
-	return CFG_SDRAM_SIZE * 1024 * 1024;
+	return CONFIG_SYS_SDRAM_SIZE * 1024 * 1024;
 }
 #endif	/* !defined(CONFIG_SPD_EEPROM) */
 
diff --git a/board/freescale/mpc8540ads/tlb.c b/board/freescale/mpc8540ads/tlb.c
index 4fe2862f7..2ec3ccce9 100644
--- a/board/freescale/mpc8540ads/tlb.c
+++ b/board/freescale/mpc8540ads/tlb.c
@@ -28,16 +28,16 @@
 
 struct fsl_e_tlb_entry tlb_table[] = {
 	/* TLB 0 - for temp stack in cache */
-	SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR, CFG_INIT_RAM_ADDR,
+	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR, CONFIG_SYS_INIT_RAM_ADDR,
 		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
 		      0, 0, BOOKE_PAGESZ_4K, 0),
-	SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR + 4 * 1024 , CFG_INIT_RAM_ADDR + 4 * 1024,
+	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024 , CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024,
 		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
 		      0, 0, BOOKE_PAGESZ_4K, 0),
-	SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR + 8 * 1024 , CFG_INIT_RAM_ADDR + 8 * 1024,
+	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024 , CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024,
 		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
 		      0, 0, BOOKE_PAGESZ_4K, 0),
-	SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR + 12 * 1024 , CFG_INIT_RAM_ADDR + 12 * 1024,
+	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024 , CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024,
 		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
 		      0, 0, BOOKE_PAGESZ_4K, 0),
 
@@ -46,7 +46,7 @@ struct fsl_e_tlb_entry tlb_table[] = {
 	 * 0xff000000	16M	FLASH
 	 * Out of reset this entry is only 4K.
 	 */
-	SET_TLB_ENTRY(1, CFG_FLASH_BASE, CFG_FLASH_BASE,
+	SET_TLB_ENTRY(1, CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE,
 		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 		      0, 0, BOOKE_PAGESZ_16M, 1),
 
@@ -54,7 +54,7 @@ struct fsl_e_tlb_entry tlb_table[] = {
 	 * TLB 1:	256M	Non-cacheable, guarded
 	 * 0x80000000	256M	PCI1 MEM First half
 	 */
-	SET_TLB_ENTRY(1, CFG_PCI1_MEM_PHYS, CFG_PCI1_MEM_PHYS,
+	SET_TLB_ENTRY(1, CONFIG_SYS_PCI1_MEM_PHYS, CONFIG_SYS_PCI1_MEM_PHYS,
 		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 		      0, 1, BOOKE_PAGESZ_256M, 1),
 
@@ -62,7 +62,7 @@ struct fsl_e_tlb_entry tlb_table[] = {
 	 * TLB 2:	256M	Non-cacheable, guarded
 	 * 0x90000000	256M	PCI1 MEM Second half
 	 */
-	SET_TLB_ENTRY(1, CFG_PCI1_MEM_PHYS + 0x10000000, CFG_PCI1_MEM_PHYS + 0x10000000,
+	SET_TLB_ENTRY(1, CONFIG_SYS_PCI1_MEM_PHYS + 0x10000000, CONFIG_SYS_PCI1_MEM_PHYS + 0x10000000,
 		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 		      0, 2, BOOKE_PAGESZ_256M, 1),
 
@@ -70,7 +70,7 @@ struct fsl_e_tlb_entry tlb_table[] = {
 	 * TLB 3:	256M	Non-cacheable, guarded
 	 * 0xc0000000	256M	Rapid IO MEM First half
 	 */
-	SET_TLB_ENTRY(1, CFG_RIO_MEM_BASE, CFG_RIO_MEM_BASE,
+	SET_TLB_ENTRY(1, CONFIG_SYS_RIO_MEM_BASE, CONFIG_SYS_RIO_MEM_BASE,
 		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 		      0, 3, BOOKE_PAGESZ_256M, 1),
 
@@ -78,7 +78,7 @@ struct fsl_e_tlb_entry tlb_table[] = {
 	 * TLB 4:	256M	Non-cacheable, guarded
 	 * 0xd0000000	256M	Rapid IO MEM Second half
 	 */
-	SET_TLB_ENTRY(1, CFG_RIO_MEM_BASE + 0x10000000, CFG_RIO_MEM_BASE + 0x10000000,
+	SET_TLB_ENTRY(1, CONFIG_SYS_RIO_MEM_BASE + 0x10000000, CONFIG_SYS_RIO_MEM_BASE + 0x10000000,
 		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 		      0, 4, BOOKE_PAGESZ_256M, 1),
 
@@ -87,7 +87,7 @@ struct fsl_e_tlb_entry tlb_table[] = {
 	 * 0xe000_0000	1M	CCSRBAR
 	 * 0xe200_0000	16M	PCI1 IO
 	 */
-	SET_TLB_ENTRY(1, CFG_CCSRBAR, CFG_CCSRBAR_PHYS,
+	SET_TLB_ENTRY(1, CONFIG_SYS_CCSRBAR, CONFIG_SYS_CCSRBAR_PHYS,
 		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 		      0, 5, BOOKE_PAGESZ_64M, 1),
 
@@ -95,7 +95,7 @@ struct fsl_e_tlb_entry tlb_table[] = {
 	 * TLB 6:	64M	Cacheable, non-guarded
 	 * 0xf000_0000	64M	LBC SDRAM
 	 */
-	SET_TLB_ENTRY(1, CFG_LBC_SDRAM_BASE, CFG_LBC_SDRAM_BASE,
+	SET_TLB_ENTRY(1, CONFIG_SYS_LBC_SDRAM_BASE, CONFIG_SYS_LBC_SDRAM_BASE,
 		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
 		      0, 6, BOOKE_PAGESZ_64M, 1),
 
@@ -103,7 +103,7 @@ struct fsl_e_tlb_entry tlb_table[] = {
 	 * TLB 7:	16K	Non-cacheable, guarded
 	 * 0xf8000000	16K	BCSR registers
 	 */
-	SET_TLB_ENTRY(1, CFG_BCSR, CFG_BCSR,
+	SET_TLB_ENTRY(1, CONFIG_SYS_BCSR, CONFIG_SYS_BCSR,
 		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 		      0, 7, BOOKE_PAGESZ_16K, 1),
 
@@ -117,11 +117,11 @@ struct fsl_e_tlb_entry tlb_table[] = {
 	 * Likely it needs to be increased by two for these entries.
 	 */
 #error("Update the number of table entries in tlb1_entry")
-	SET_TLB_ENTRY(1, CFG_DDR_SDRAM_BASE, CFG_DDR_SDRAM_BASE,
+	SET_TLB_ENTRY(1, CONFIG_SYS_DDR_SDRAM_BASE, CONFIG_SYS_DDR_SDRAM_BASE,
 		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
 		      0, 8, BOOKE_PAGESZ_64M, 1),
 
-	SET_TLB_ENTRY(1, CFG_DDR_SDRAM_BASE + 0x4000000, CFG_DDR_SDRAM_BASE + 0x4000000,
+	SET_TLB_ENTRY(1, CONFIG_SYS_DDR_SDRAM_BASE + 0x4000000, CONFIG_SYS_DDR_SDRAM_BASE + 0x4000000,
 		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
 		      0, 9, BOOKE_PAGESZ_64M, 1),
 #endif
diff --git a/board/freescale/mpc8541cds/ddr.c b/board/freescale/mpc8541cds/ddr.c
index 11ce57d36..c84a6cbe1 100644
--- a/board/freescale/mpc8541cds/ddr.c
+++ b/board/freescale/mpc8541cds/ddr.c
@@ -10,6 +10,7 @@
 #include <i2c.h>
 
 #include <asm/fsl_ddr_sdram.h>
+#include <asm/fsl_ddr_dimm_params.h>
 
 static void
 get_spd(ddr1_spd_eeprom_t *spd, unsigned char i2c_address)
@@ -36,7 +37,9 @@ void fsl_ddr_get_spd(ddr1_spd_eeprom_t *ctrl_dimms_spd,
 	}
 }
 
-void fsl_ddr_board_options(memctl_options_t *popts, unsigned int ctrl_num)
+void fsl_ddr_board_options(memctl_options_t *popts,
+				dimm_params_t *pdimm,
+				unsigned int ctrl_num)
 {
 	/*
 	 * Factors to consider for clock adjust:
diff --git a/board/freescale/mpc8541cds/law.c b/board/freescale/mpc8541cds/law.c
index fbf2bdc07..8e3de22a4 100644
--- a/board/freescale/mpc8541cds/law.c
+++ b/board/freescale/mpc8541cds/law.c
@@ -47,12 +47,12 @@
  */
 
 struct law_entry law_table[] = {
-	SET_LAW(CFG_PCI1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI),
-	SET_LAW(CFG_PCI2_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI_2),
-	SET_LAW(CFG_PCI1_IO_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_PCI),
-	SET_LAW(CFG_PCI2_IO_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_PCI_2),
+	SET_LAW(CONFIG_SYS_PCI1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI),
+	SET_LAW(CONFIG_SYS_PCI2_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI_2),
+	SET_LAW(CONFIG_SYS_PCI1_IO_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_PCI),
+	SET_LAW(CONFIG_SYS_PCI2_IO_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_PCI_2),
 	/* LBC window - maps 256M 0xf0000000 -> 0xffffffff */
-	SET_LAW(CFG_LBC_SDRAM_BASE, LAW_SIZE_256M, LAW_TRGT_IF_LBC),
+	SET_LAW(CONFIG_SYS_LBC_SDRAM_BASE, LAW_SIZE_256M, LAW_TRGT_IF_LBC),
 };
 
 int num_law_entries = ARRAY_SIZE(law_table);
diff --git a/board/freescale/mpc8541cds/mpc8541cds.c b/board/freescale/mpc8541cds/mpc8541cds.c
index de3a79151..7e40c5c80 100644
--- a/board/freescale/mpc8541cds/mpc8541cds.c
+++ b/board/freescale/mpc8541cds/mpc8541cds.c
@@ -200,7 +200,7 @@ const iop_conf_t iop_conf_tab[4][32] = {
 
 int checkboard (void)
 {
-	volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR);
+	volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
 
 	/* PCI slot in USER bits CSR[6:7] by convention. */
 	uint pci_slot = get_pci_slot ();
@@ -258,7 +258,7 @@ initdram(int board_type)
 		 *    Override DLL = 1, Course Adj = 1, Tap Select = 0
 		 */
 
-		volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR);
+		volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
 
 		gur->ddrdllcr = 0x81000000;
 		asm("sync;isync;msync");
@@ -290,8 +290,8 @@ initdram(int board_type)
 void
 local_bus_init(void)
 {
-	volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR);
-	volatile ccsr_lbc_t *lbc = (void *)(CFG_MPC85xx_LBC_ADDR);
+	volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+	volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR);
 
 	uint clkdiv;
 	uint lbc_hz;
@@ -302,8 +302,8 @@ local_bus_init(void)
 	 * Errata LBC11.
 	 * Fix Local Bus clock glitch when DLL is enabled.
 	 *
-	 * If localbus freq is < 66Mhz, DLL bypass mode must be used.
-	 * If localbus freq is > 133Mhz, DLL can be safely enabled.
+	 * If localbus freq is < 66MHz, DLL bypass mode must be used.
+	 * If localbus freq is > 133MHz, DLL can be safely enabled.
 	 * Between 66 and 133, the DLL is enabled with an override workaround.
 	 */
 
@@ -337,56 +337,56 @@ local_bus_init(void)
 void
 sdram_init(void)
 {
-#if defined(CFG_OR2_PRELIM) && defined(CFG_BR2_PRELIM)
+#if defined(CONFIG_SYS_OR2_PRELIM) && defined(CONFIG_SYS_BR2_PRELIM)
 
 	uint idx;
-	volatile ccsr_lbc_t *lbc = (void *)(CFG_MPC85xx_LBC_ADDR);
-	uint *sdram_addr = (uint *)CFG_LBC_SDRAM_BASE;
+	volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR);
+	uint *sdram_addr = (uint *)CONFIG_SYS_LBC_SDRAM_BASE;
 	uint cpu_board_rev;
 	uint lsdmr_common;
 
 	puts("    SDRAM: ");
 
-	print_size (CFG_LBC_SDRAM_SIZE * 1024 * 1024, "\n");
+	print_size (CONFIG_SYS_LBC_SDRAM_SIZE * 1024 * 1024, "\n");
 
 	/*
 	 * Setup SDRAM Base and Option Registers
 	 */
-	lbc->or2 = CFG_OR2_PRELIM;
+	lbc->or2 = CONFIG_SYS_OR2_PRELIM;
 	asm("msync");
 
-	lbc->br2 = CFG_BR2_PRELIM;
+	lbc->br2 = CONFIG_SYS_BR2_PRELIM;
 	asm("msync");
 
-	lbc->lbcr = CFG_LBC_LBCR;
+	lbc->lbcr = CONFIG_SYS_LBC_LBCR;
 	asm("msync");
 
 
-	lbc->lsrt = CFG_LBC_LSRT;
-	lbc->mrtpr = CFG_LBC_MRTPR;
+	lbc->lsrt = CONFIG_SYS_LBC_LSRT;
+	lbc->mrtpr = CONFIG_SYS_LBC_MRTPR;
 	asm("msync");
 
 	/*
 	 * Determine which address lines to use baed on CPU board rev.
 	 */
 	cpu_board_rev = get_cpu_board_revision();
-	lsdmr_common = CFG_LBC_LSDMR_COMMON;
+	lsdmr_common = CONFIG_SYS_LBC_LSDMR_COMMON;
 	if (cpu_board_rev == MPC85XX_CPU_BOARD_REV_1_0) {
-		lsdmr_common |= CFG_LBC_LSDMR_BSMA1617;
+		lsdmr_common |= CONFIG_SYS_LBC_LSDMR_BSMA1617;
 	} else if (cpu_board_rev == MPC85XX_CPU_BOARD_REV_1_1) {
-		lsdmr_common |= CFG_LBC_LSDMR_BSMA1516;
+		lsdmr_common |= CONFIG_SYS_LBC_LSDMR_BSMA1516;
 	} else {
 		/*
 		 * Assume something unable to identify itself is
 		 * really old, and likely has lines 16/17 mapped.
 		 */
-		lsdmr_common |= CFG_LBC_LSDMR_BSMA1617;
+		lsdmr_common |= CONFIG_SYS_LBC_LSDMR_BSMA1617;
 	}
 
 	/*
 	 * Issue PRECHARGE ALL command.
 	 */
-	lbc->lsdmr = lsdmr_common | CFG_LBC_LSDMR_OP_PCHALL;
+	lbc->lsdmr = lsdmr_common | CONFIG_SYS_LBC_LSDMR_OP_PCHALL;
 	asm("sync;msync");
 	*sdram_addr = 0xff;
 	ppcDcbf((unsigned long) sdram_addr);
@@ -396,7 +396,7 @@ sdram_init(void)
 	 * Issue 8 AUTO REFRESH commands.
 	 */
 	for (idx = 0; idx < 8; idx++) {
-		lbc->lsdmr = lsdmr_common | CFG_LBC_LSDMR_OP_ARFRSH;
+		lbc->lsdmr = lsdmr_common | CONFIG_SYS_LBC_LSDMR_OP_ARFRSH;
 		asm("sync;msync");
 		*sdram_addr = 0xff;
 		ppcDcbf((unsigned long) sdram_addr);
@@ -406,7 +406,7 @@ sdram_init(void)
 	/*
 	 * Issue 8 MODE-set command.
 	 */
-	lbc->lsdmr = lsdmr_common | CFG_LBC_LSDMR_OP_MRW;
+	lbc->lsdmr = lsdmr_common | CONFIG_SYS_LBC_LSDMR_OP_MRW;
 	asm("sync;msync");
 	*sdram_addr = 0xff;
 	ppcDcbf((unsigned long) sdram_addr);
@@ -415,7 +415,7 @@ sdram_init(void)
 	/*
 	 * Issue NORMAL OP command.
 	 */
-	lbc->lsdmr = lsdmr_common | CFG_LBC_LSDMR_OP_NORMAL;
+	lbc->lsdmr = lsdmr_common | CONFIG_SYS_LBC_LSDMR_OP_NORMAL;
 	asm("sync;msync");
 	*sdram_addr = 0xff;
 	ppcDcbf((unsigned long) sdram_addr);
diff --git a/board/freescale/mpc8541cds/tlb.c b/board/freescale/mpc8541cds/tlb.c
index c5434a069..bf957c08c 100644
--- a/board/freescale/mpc8541cds/tlb.c
+++ b/board/freescale/mpc8541cds/tlb.c
@@ -28,16 +28,16 @@
 
 struct fsl_e_tlb_entry tlb_table[] = {
 	/* TLB 0 - for temp stack in cache */
-	SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR, CFG_INIT_RAM_ADDR,
+	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR, CONFIG_SYS_INIT_RAM_ADDR,
 		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
 		      0, 0, BOOKE_PAGESZ_4K, 0),
-	SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR + 4 * 1024 , CFG_INIT_RAM_ADDR + 4 * 1024,
+	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024 , CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024,
 		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
 		      0, 0, BOOKE_PAGESZ_4K, 0),
-	SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR + 8 * 1024 , CFG_INIT_RAM_ADDR + 8 * 1024,
+	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024 , CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024,
 		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
 		      0, 0, BOOKE_PAGESZ_4K, 0),
-	SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR + 12 * 1024 , CFG_INIT_RAM_ADDR + 12 * 1024,
+	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024 , CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024,
 		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
 		      0, 0, BOOKE_PAGESZ_4K, 0),
 
@@ -46,7 +46,7 @@ struct fsl_e_tlb_entry tlb_table[] = {
 	 * 0xff000000	16M	FLASH
 	 * Out of reset this entry is only 4K.
 	 */
-	SET_TLB_ENTRY(1, CFG_FLASH_BASE, CFG_FLASH_BASE,
+	SET_TLB_ENTRY(1, CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE,
 		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 		      0, 0, BOOKE_PAGESZ_16M, 1),
 
@@ -54,7 +54,7 @@ struct fsl_e_tlb_entry tlb_table[] = {
 	 * TLB 1:	256M	Non-cacheable, guarded
 	 * 0x80000000	256M	PCI1 MEM First half
 	 */
-	SET_TLB_ENTRY(1, CFG_PCI1_MEM_PHYS, CFG_PCI1_MEM_PHYS,
+	SET_TLB_ENTRY(1, CONFIG_SYS_PCI1_MEM_PHYS, CONFIG_SYS_PCI1_MEM_PHYS,
 		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 		      0, 1, BOOKE_PAGESZ_256M, 1),
 
@@ -62,7 +62,7 @@ struct fsl_e_tlb_entry tlb_table[] = {
 	 * TLB 2:	256M	Non-cacheable, guarded
 	 * 0x90000000	256M	PCI1 MEM Second half
 	 */
-	SET_TLB_ENTRY(1, CFG_PCI1_MEM_PHYS + 0x10000000, CFG_PCI1_MEM_PHYS + 0x10000000,
+	SET_TLB_ENTRY(1, CONFIG_SYS_PCI1_MEM_PHYS + 0x10000000, CONFIG_SYS_PCI1_MEM_PHYS + 0x10000000,
 		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 		      0, 2, BOOKE_PAGESZ_256M, 1),
 
@@ -70,7 +70,7 @@ struct fsl_e_tlb_entry tlb_table[] = {
 	 * TLB 3:	256M	Non-cacheable, guarded
 	 * 0xa0000000	256M	PCI2 MEM First half
 	 */
-	SET_TLB_ENTRY(1, CFG_PCI2_MEM_PHYS, CFG_PCI2_MEM_PHYS,
+	SET_TLB_ENTRY(1, CONFIG_SYS_PCI2_MEM_PHYS, CONFIG_SYS_PCI2_MEM_PHYS,
 		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 		      0, 3, BOOKE_PAGESZ_256M, 1),
 
@@ -78,7 +78,7 @@ struct fsl_e_tlb_entry tlb_table[] = {
 	 * TLB 4:	256M	Non-cacheable, guarded
 	 * 0xb0000000	256M	PCI2 MEM Second half
 	 */
-	SET_TLB_ENTRY(1, CFG_PCI2_MEM_PHYS + 0x10000000, CFG_PCI2_MEM_PHYS + 0x10000000,
+	SET_TLB_ENTRY(1, CONFIG_SYS_PCI2_MEM_PHYS + 0x10000000, CONFIG_SYS_PCI2_MEM_PHYS + 0x10000000,
 		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 		      0, 4, BOOKE_PAGESZ_256M, 1),
 
@@ -88,7 +88,7 @@ struct fsl_e_tlb_entry tlb_table[] = {
 	 * 0xe200_0000	16M	PCI1 IO
 	 * 0xe300_0000	16M	PCI2 IO
 	 */
-	SET_TLB_ENTRY(1, CFG_CCSRBAR, CFG_CCSRBAR_PHYS,
+	SET_TLB_ENTRY(1, CONFIG_SYS_CCSRBAR, CONFIG_SYS_CCSRBAR_PHYS,
 		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 		      0, 5, BOOKE_PAGESZ_64M, 1),
 
@@ -96,7 +96,7 @@ struct fsl_e_tlb_entry tlb_table[] = {
 	 * TLB 6:	64M	Cacheable, non-guarded
 	 * 0xf000_0000	64M	LBC SDRAM
 	 */
-	SET_TLB_ENTRY(1, CFG_LBC_SDRAM_BASE, CFG_LBC_SDRAM_BASE,
+	SET_TLB_ENTRY(1, CONFIG_SYS_LBC_SDRAM_BASE, CONFIG_SYS_LBC_SDRAM_BASE,
 		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
 		      0, 6, BOOKE_PAGESZ_64M, 1),
 
diff --git a/board/freescale/mpc8544ds/ddr.c b/board/freescale/mpc8544ds/ddr.c
index bbb5ee2c4..34f84a265 100644
--- a/board/freescale/mpc8544ds/ddr.c
+++ b/board/freescale/mpc8544ds/ddr.c
@@ -10,6 +10,7 @@
 #include <i2c.h>
 
 #include <asm/fsl_ddr_sdram.h>
+#include <asm/fsl_ddr_dimm_params.h>
 
 static void
 get_spd(ddr2_spd_eeprom_t *spd, unsigned char i2c_address)
@@ -37,7 +38,9 @@ void fsl_ddr_get_spd(ddr2_spd_eeprom_t *ctrl_dimms_spd,
 	}
 }
 
-void fsl_ddr_board_options(memctl_options_t *popts, unsigned int ctrl_num)
+void fsl_ddr_board_options(memctl_options_t *popts,
+				dimm_params_t *pdimm,
+				unsigned int ctrl_num)
 {
 	/*
 	 * Factors to consider for clock adjust:
diff --git a/board/freescale/mpc8544ds/law.c b/board/freescale/mpc8544ds/law.c
index 54cf36bd4..317ba2696 100644
--- a/board/freescale/mpc8544ds/law.c
+++ b/board/freescale/mpc8544ds/law.c
@@ -28,15 +28,15 @@
 #include <asm/mmu.h>
 
 struct law_entry law_table[] = {
-	SET_LAW(CFG_PCI1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI),
-	SET_LAW(CFG_PCI1_IO_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_PCI),
-	SET_LAW(CFG_LBC_NONCACHE_BASE, LAWAR_SIZE_128M, LAW_TRGT_IF_LBC),
-	SET_LAW(CFG_PCIE1_MEM_PHYS, LAWAR_SIZE_256M, LAW_TRGT_IF_PCIE_1),
-	SET_LAW(CFG_PCIE1_IO_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_PCIE_1),
-	SET_LAW(CFG_PCIE2_MEM_PHYS, LAWAR_SIZE_512M, LAW_TRGT_IF_PCIE_2),
-	SET_LAW(CFG_PCIE2_IO_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_PCIE_2),
+	SET_LAW(CONFIG_SYS_PCI1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI),
+	SET_LAW(CONFIG_SYS_PCI1_IO_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_PCI),
+	SET_LAW(CONFIG_SYS_LBC_NONCACHE_BASE, LAWAR_SIZE_128M, LAW_TRGT_IF_LBC),
+	SET_LAW(CONFIG_SYS_PCIE1_MEM_PHYS, LAWAR_SIZE_256M, LAW_TRGT_IF_PCIE_1),
+	SET_LAW(CONFIG_SYS_PCIE1_IO_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_PCIE_1),
+	SET_LAW(CONFIG_SYS_PCIE2_MEM_PHYS, LAWAR_SIZE_512M, LAW_TRGT_IF_PCIE_2),
+	SET_LAW(CONFIG_SYS_PCIE2_IO_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_PCIE_2),
 	/* contains both PCIE3 MEM & IO space */
-	SET_LAW(CFG_PCIE3_MEM_PHYS, LAW_SIZE_4M, LAW_TRGT_IF_PCIE_3),
+	SET_LAW(CONFIG_SYS_PCIE3_MEM_PHYS, LAW_SIZE_4M, LAW_TRGT_IF_PCIE_3),
 };
 
 int num_law_entries = ARRAY_SIZE(law_table);
diff --git a/board/freescale/mpc8544ds/mpc8544ds.c b/board/freescale/mpc8544ds/mpc8544ds.c
index 4e976b78f..14581abdd 100644
--- a/board/freescale/mpc8544ds/mpc8544ds.c
+++ b/board/freescale/mpc8544ds/mpc8544ds.c
@@ -32,18 +32,17 @@
 #include <miiphy.h>
 #include <libfdt.h>
 #include <fdt_support.h>
+#include <tsec.h>
+#include <netdev.h>
 
 #include "../common/pixis.h"
-
-#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
-extern void ddr_enable_ecc(unsigned int dram_size);
-#endif
+#include "../common/sgmii_riser.h"
 
 int checkboard (void)
 {
-	volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR);
-	volatile ccsr_lbc_t *lbc = (void *)(CFG_MPC85xx_LBC_ADDR);
-	volatile ccsr_local_ecm_t *ecm = (void *)(CFG_MPC85xx_ECM_ADDR);
+	volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+	volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR);
+	volatile ccsr_local_ecm_t *ecm = (void *)(CONFIG_SYS_MPC85xx_ECM_ADDR);
 
 	if ((uint)&gur->porpllsr != 0xe00e0000) {
 		printf("immap size error %lx\n",(ulong)&gur->porpllsr);
@@ -74,12 +73,6 @@ initdram(int board_type)
 
 	dram_size *= 0x100000;
 
-#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
-	/*
-	 * Initialize and enable DDR ECC.
-	 */
-	ddr_enable_ecc(dram_size);
-#endif
 	puts("    DDR: ");
 	return dram_size;
 }
@@ -100,12 +93,15 @@ static struct pci_controller pcie2_hose;
 static struct pci_controller pcie3_hose;
 #endif
 
+extern int fsl_pci_setup_inbound_windows(struct pci_region *r);
+extern void fsl_pci_init(struct pci_controller *hose);
+
 int first_free_busno=0;
 
 void
 pci_init_board(void)
 {
-	volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR);
+	volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
 	uint devdisr = gur->devdisr;
 	uint io_sel = (gur->pordevsr & MPC85xx_PORDEVSR_IO_SEL) >> 19;
 	uint host_agent = (gur->porbmsr & MPC85xx_PORBMSR_HA) >> 16;
@@ -122,11 +118,11 @@ pci_init_board(void)
 
 #ifdef CONFIG_PCIE3
 {
-	volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CFG_PCIE3_ADDR;
-	extern void fsl_pci_init(struct pci_controller *hose);
+	volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCIE3_ADDR;
 	struct pci_controller *hose = &pcie3_hose;
 	int pcie_ep = (host_agent == 1);
 	int pcie_configured  = io_sel >= 1;
+	struct pci_region *r = hose->regions;
 
 	if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE)){
 		printf ("\n    PCIE3 connected to ULI as %s (base address %x)",
@@ -139,36 +135,31 @@ pci_init_board(void)
 		printf ("\n");
 
 		/* inbound */
-		pci_set_region(hose->regions + 0,
-			       CFG_PCI_MEMORY_BUS,
-			       CFG_PCI_MEMORY_PHYS,
-			       CFG_PCI_MEMORY_SIZE,
-			       PCI_REGION_MEM | PCI_REGION_MEMORY);
+		r += fsl_pci_setup_inbound_windows(r);
 
 		/* outbound memory */
-		pci_set_region(hose->regions + 1,
-			       CFG_PCIE3_MEM_BASE,
-			       CFG_PCIE3_MEM_PHYS,
-			       CFG_PCIE3_MEM_SIZE,
+		pci_set_region(r++,
+			       CONFIG_SYS_PCIE3_MEM_BASE,
+			       CONFIG_SYS_PCIE3_MEM_PHYS,
+			       CONFIG_SYS_PCIE3_MEM_SIZE,
 			       PCI_REGION_MEM);
 
 		/* outbound io */
-		pci_set_region(hose->regions + 2,
-			       CFG_PCIE3_IO_BASE,
-			       CFG_PCIE3_IO_PHYS,
-			       CFG_PCIE3_IO_SIZE,
+		pci_set_region(r++,
+			       CONFIG_SYS_PCIE3_IO_BASE,
+			       CONFIG_SYS_PCIE3_IO_PHYS,
+			       CONFIG_SYS_PCIE3_IO_SIZE,
 			       PCI_REGION_IO);
 
-		hose->region_count = 3;
-#ifdef CFG_PCIE3_MEM_BASE2
+#ifdef CONFIG_SYS_PCIE3_MEM_BASE2
 		/* outbound memory */
-		pci_set_region(hose->regions + 3,
-			       CFG_PCIE3_MEM_BASE2,
-			       CFG_PCIE3_MEM_PHYS2,
-			       CFG_PCIE3_MEM_SIZE2,
+		pci_set_region(r++,
+			       CONFIG_SYS_PCIE3_MEM_BASE2,
+			       CONFIG_SYS_PCIE3_MEM_PHYS2,
+			       CONFIG_SYS_PCIE3_MEM_SIZE2,
 			       PCI_REGION_MEM);
-		hose->region_count++;
 #endif
+		hose->region_count = r - hose->regions;
 		hose->first_busno=first_free_busno;
 		pci_setup_indirect(hose, (int) &pci->cfg_addr, (int) &pci->cfg_data);
 
@@ -182,7 +173,7 @@ pci_init_board(void)
 		 * Activate ULI1575 legacy chip by performing a fake
 		 * memory access.  Needed to make ULI RTC work.
 		 */
-		in_be32((u32 *)CFG_PCIE3_MEM_BASE);
+		in_be32((u32 *)CONFIG_SYS_PCIE3_MEM_BASE);
 	} else {
 		printf ("    PCIE3: disabled\n");
 	}
@@ -194,11 +185,11 @@ pci_init_board(void)
 
 #ifdef CONFIG_PCIE1
  {
-	volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CFG_PCIE1_ADDR;
-	extern void fsl_pci_init(struct pci_controller *hose);
+	volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCIE1_ADDR;
 	struct pci_controller *hose = &pcie1_hose;
 	int pcie_ep = (host_agent == 5);
 	int pcie_configured  = io_sel & 6;
+	struct pci_region *r = hose->regions;
 
 	if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE)){
 		printf ("\n    PCIE1 connected to Slot2 as %s (base address %x)",
@@ -211,36 +202,31 @@ pci_init_board(void)
 		printf ("\n");
 
 		/* inbound */
-		pci_set_region(hose->regions + 0,
-			       CFG_PCI_MEMORY_BUS,
-			       CFG_PCI_MEMORY_PHYS,
-			       CFG_PCI_MEMORY_SIZE,
-			       PCI_REGION_MEM | PCI_REGION_MEMORY);
+		r += fsl_pci_setup_inbound_windows(r);
 
 		/* outbound memory */
-		pci_set_region(hose->regions + 1,
-			       CFG_PCIE1_MEM_BASE,
-			       CFG_PCIE1_MEM_PHYS,
-			       CFG_PCIE1_MEM_SIZE,
+		pci_set_region(r++,
+			       CONFIG_SYS_PCIE1_MEM_BASE,
+			       CONFIG_SYS_PCIE1_MEM_PHYS,
+			       CONFIG_SYS_PCIE1_MEM_SIZE,
 			       PCI_REGION_MEM);
 
 		/* outbound io */
-		pci_set_region(hose->regions + 2,
-			       CFG_PCIE1_IO_BASE,
-			       CFG_PCIE1_IO_PHYS,
-			       CFG_PCIE1_IO_SIZE,
+		pci_set_region(r++,
+			       CONFIG_SYS_PCIE1_IO_BASE,
+			       CONFIG_SYS_PCIE1_IO_PHYS,
+			       CONFIG_SYS_PCIE1_IO_SIZE,
 			       PCI_REGION_IO);
 
-		hose->region_count = 3;
-#ifdef CFG_PCIE1_MEM_BASE2
+#ifdef CONFIG_SYS_PCIE1_MEM_BASE2
 		/* outbound memory */
-		pci_set_region(hose->regions + 3,
-			       CFG_PCIE1_MEM_BASE2,
-			       CFG_PCIE1_MEM_PHYS2,
-			       CFG_PCIE1_MEM_SIZE2,
+		pci_set_region(r++,
+			       CONFIG_SYS_PCIE1_MEM_BASE2,
+			       CONFIG_SYS_PCIE1_MEM_PHYS2,
+			       CONFIG_SYS_PCIE1_MEM_SIZE2,
 			       PCI_REGION_MEM);
-		hose->region_count++;
 #endif
+		hose->region_count = r - hose->regions;
 		hose->first_busno=first_free_busno;
 
 		pci_setup_indirect(hose, (int) &pci->cfg_addr, (int) &pci->cfg_data);
@@ -262,11 +248,11 @@ pci_init_board(void)
 
 #ifdef CONFIG_PCIE2
  {
-	volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CFG_PCIE2_ADDR;
-	extern void fsl_pci_init(struct pci_controller *hose);
+	volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCIE2_ADDR;
 	struct pci_controller *hose = &pcie2_hose;
 	int pcie_ep = (host_agent == 3);
 	int pcie_configured  = io_sel & 4;
+	struct pci_region *r = hose->regions;
 
 	if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE)){
 		printf ("\n    PCIE2 connected to Slot 1 as %s (base address %x)",
@@ -279,36 +265,31 @@ pci_init_board(void)
 		printf ("\n");
 
 		/* inbound */
-		pci_set_region(hose->regions + 0,
-			       CFG_PCI_MEMORY_BUS,
-			       CFG_PCI_MEMORY_PHYS,
-			       CFG_PCI_MEMORY_SIZE,
-			       PCI_REGION_MEM | PCI_REGION_MEMORY);
+		r += fsl_pci_setup_inbound_windows(r);
 
 		/* outbound memory */
-		pci_set_region(hose->regions + 1,
-			       CFG_PCIE2_MEM_BASE,
-			       CFG_PCIE2_MEM_PHYS,
-			       CFG_PCIE2_MEM_SIZE,
+		pci_set_region(r++,
+			       CONFIG_SYS_PCIE2_MEM_BASE,
+			       CONFIG_SYS_PCIE2_MEM_PHYS,
+			       CONFIG_SYS_PCIE2_MEM_SIZE,
 			       PCI_REGION_MEM);
 
 		/* outbound io */
-		pci_set_region(hose->regions + 2,
-			       CFG_PCIE2_IO_BASE,
-			       CFG_PCIE2_IO_PHYS,
-			       CFG_PCIE2_IO_SIZE,
+		pci_set_region(r++,
+			       CONFIG_SYS_PCIE2_IO_BASE,
+			       CONFIG_SYS_PCIE2_IO_PHYS,
+			       CONFIG_SYS_PCIE2_IO_SIZE,
 			       PCI_REGION_IO);
 
-		hose->region_count = 3;
-#ifdef CFG_PCIE2_MEM_BASE2
+#ifdef CONFIG_SYS_PCIE2_MEM_BASE2
 		/* outbound memory */
-		pci_set_region(hose->regions + 3,
-			       CFG_PCIE2_MEM_BASE2,
-			       CFG_PCIE2_MEM_PHYS2,
-			       CFG_PCIE2_MEM_SIZE2,
+		pci_set_region(r++,
+			       CONFIG_SYS_PCIE2_MEM_BASE2,
+			       CONFIG_SYS_PCIE2_MEM_PHYS2,
+			       CONFIG_SYS_PCIE2_MEM_SIZE2,
 			       PCI_REGION_MEM);
-		hose->region_count++;
 #endif
+		hose->region_count = r - hose->regions;
 		hose->first_busno=first_free_busno;
 		pci_setup_indirect(hose, (int) &pci->cfg_addr, (int) &pci->cfg_data);
 
@@ -329,9 +310,9 @@ pci_init_board(void)
 
 #ifdef CONFIG_PCI1
 {
-	volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CFG_PCI1_ADDR;
-	extern void fsl_pci_init(struct pci_controller *hose);
+	volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCI1_ADDR;
 	struct pci_controller *hose = &pci1_hose;
+	struct pci_region *r = hose->regions;
 
 	uint pci_agent = (host_agent == 6);
 	uint pci_speed = 66666000; /*get_clock_freq (); PCI PSPEED in [4:5] */
@@ -352,35 +333,31 @@ pci_init_board(void)
 			);
 
 		/* inbound */
-		pci_set_region(hose->regions + 0,
-			       CFG_PCI_MEMORY_BUS,
-			       CFG_PCI_MEMORY_PHYS,
-			       CFG_PCI_MEMORY_SIZE,
-			       PCI_REGION_MEM | PCI_REGION_MEMORY);
+		r += fsl_pci_setup_inbound_windows(r);
 
 		/* outbound memory */
-		pci_set_region(hose->regions + 1,
-			       CFG_PCI1_MEM_BASE,
-			       CFG_PCI1_MEM_PHYS,
-			       CFG_PCI1_MEM_SIZE,
+		pci_set_region(r++,
+			       CONFIG_SYS_PCI1_MEM_BASE,
+			       CONFIG_SYS_PCI1_MEM_PHYS,
+			       CONFIG_SYS_PCI1_MEM_SIZE,
 			       PCI_REGION_MEM);
 
 		/* outbound io */
-		pci_set_region(hose->regions + 2,
-			       CFG_PCI1_IO_BASE,
-			       CFG_PCI1_IO_PHYS,
-			       CFG_PCI1_IO_SIZE,
+		pci_set_region(r++,
+			       CONFIG_SYS_PCI1_IO_BASE,
+			       CONFIG_SYS_PCI1_IO_PHYS,
+			       CONFIG_SYS_PCI1_IO_SIZE,
 			       PCI_REGION_IO);
-		hose->region_count = 3;
-#ifdef CFG_PCIE3_MEM_BASE2
+
+#ifdef CONFIG_SYS_PCIE3_MEM_BASE2
 		/* outbound memory */
-		pci_set_region(hose->regions + 3,
-			       CFG_PCIE3_MEM_BASE2,
-			       CFG_PCIE3_MEM_PHYS2,
-			       CFG_PCIE3_MEM_SIZE2,
+		pci_set_region(r++,
+			       CONFIG_SYS_PCIE3_MEM_BASE2,
+			       CONFIG_SYS_PCIE3_MEM_PHYS2,
+			       CONFIG_SYS_PCIE3_MEM_SIZE2,
 			       PCI_REGION_MEM);
-		hose->region_count++;
 #endif
+		hose->region_count = r - hose->regions;
 		hose->first_busno=first_free_busno;
 		pci_setup_indirect(hose, (int) &pci->cfg_addr, (int) &pci->cfg_data);
 
@@ -463,47 +440,62 @@ get_board_sys_clk(ulong dummy)
 	return val;
 }
 
+int board_eth_init(bd_t *bis)
+{
+#ifdef CONFIG_TSEC_ENET
+	struct tsec_info_struct tsec_info[2];
+	volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+	uint io_sel = (gur->pordevsr & MPC85xx_PORDEVSR_IO_SEL) >> 19;
+	int num = 0;
+
+#ifdef CONFIG_TSEC1
+	SET_STD_TSEC_INFO(tsec_info[num], 1);
+	if (!(gur->pordevsr & MPC85xx_PORDEVSR_SGMII1_DIS))
+		tsec_info[num].flags |= TSEC_SGMII;
+	num++;
+#endif
+#ifdef CONFIG_TSEC3
+	SET_STD_TSEC_INFO(tsec_info[num], 3);
+	if (!(gur->pordevsr & MPC85xx_PORDEVSR_SGMII3_DIS))
+		tsec_info[num].flags |= TSEC_SGMII;
+	num++;
+#endif
+
+	if (!num) {
+		printf("No TSECs initialized\n");
+
+		return 0;
+	}
+
+	if (io_sel & 1)
+		fsl_sgmii_riser_init(tsec_info, num);
+
+
+	tsec_eth_init(bis, tsec_info, num);
+#endif
+	return pci_eth_init(bis);
+}
+
 #if defined(CONFIG_OF_BOARD_SETUP)
+extern void ft_fsl_pci_setup(void *blob, const char *pci_alias,
+			struct pci_controller *hose);
 
-void
-ft_board_setup(void *blob, bd_t *bd)
+void ft_board_setup(void *blob, bd_t *bd)
 {
-	int node, tmp[2];
-	const char *path;
-
 	ft_cpu_setup(blob, bd);
 
-	node = fdt_path_offset(blob, "/aliases");
-	tmp[0] = 0;
-	if (node >= 0) {
+
 #ifdef CONFIG_PCI1
-		path = fdt_getprop(blob, node, "pci0", NULL);
-		if (path) {
-			tmp[1] = pci1_hose.last_busno - pci1_hose.first_busno;
-			do_fixup_by_path(blob, path, "bus-range", &tmp, 8, 1);
-		}
+	ft_fsl_pci_setup(blob, "pci0", &pci1_hose);
 #endif
 #ifdef CONFIG_PCIE2
-		path = fdt_getprop(blob, node, "pci1", NULL);
-		if (path) {
-			tmp[1] = pcie2_hose.last_busno - pcie2_hose.first_busno;
-			do_fixup_by_path(blob, path, "bus-range", &tmp, 8, 1);
-		}
+	ft_fsl_pci_setup(blob, "pci1", &pcie1_hose);
 #endif
 #ifdef CONFIG_PCIE1
-		path = fdt_getprop(blob, node, "pci2", NULL);
-		if (path) {
-			tmp[1] = pcie1_hose.last_busno - pcie1_hose.first_busno;
-			do_fixup_by_path(blob, path, "bus-range", &tmp, 8, 1);
-		}
+	ft_fsl_pci_setup(blob, "pci2", &pcie3_hose);
 #endif
 #ifdef CONFIG_PCIE3
-		path = fdt_getprop(blob, node, "pci3", NULL);
-		if (path) {
-			tmp[1] = pcie3_hose.last_busno - pcie3_hose.first_busno;
-			do_fixup_by_path(blob, path, "bus-range", &tmp, 8, 1);
-		}
+	ft_fsl_pci_setup(blob, "pci3", &pcie2_hose);
 #endif
-	}
 }
 #endif
diff --git a/board/freescale/mpc8544ds/tlb.c b/board/freescale/mpc8544ds/tlb.c
index 40e049951..c7442b26f 100644
--- a/board/freescale/mpc8544ds/tlb.c
+++ b/board/freescale/mpc8544ds/tlb.c
@@ -28,16 +28,16 @@
 
 struct fsl_e_tlb_entry tlb_table[] = {
 	/* TLB 0 - for temp stack in cache */
-	SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR, CFG_INIT_RAM_ADDR,
+	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR, CONFIG_SYS_INIT_RAM_ADDR,
 		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
 		      0, 0, BOOKE_PAGESZ_4K, 0),
-	SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR + 4 * 1024 , CFG_INIT_RAM_ADDR + 4 * 1024,
+	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024 , CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024,
 		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
 		      0, 0, BOOKE_PAGESZ_4K, 0),
-	SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR + 8 * 1024 , CFG_INIT_RAM_ADDR + 8 * 1024,
+	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024 , CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024,
 		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
 		      0, 0, BOOKE_PAGESZ_4K, 0),
-	SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR + 12 * 1024 , CFG_INIT_RAM_ADDR + 12 * 1024,
+	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024 , CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024,
 		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
 		      0, 0, BOOKE_PAGESZ_4K, 0),
 	/*
@@ -45,28 +45,28 @@ struct fsl_e_tlb_entry tlb_table[] = {
 	 * 0xfc000000	64M	Covers FLASH at 0xFE800000 and 0xFF800000
 	 * Out of reset this entry is only 4K.
 	 */
-	SET_TLB_ENTRY(1, CFG_BOOT_BLOCK, CFG_BOOT_BLOCK,
+	SET_TLB_ENTRY(1, CONFIG_SYS_BOOT_BLOCK, CONFIG_SYS_BOOT_BLOCK,
 		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 		      0, 0, BOOKE_PAGESZ_64M, 1),
 	/*
 	 * TLB 1:	1G	Non-cacheable, guarded
 	 * 0x80000000	1G	PCIE  8,9,a,b
 	 */
-	SET_TLB_ENTRY(1, CFG_PCIE_PHYS, CFG_PCIE_PHYS,
+	SET_TLB_ENTRY(1, CONFIG_SYS_PCIE_PHYS, CONFIG_SYS_PCIE_PHYS,
 		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 		      0, 1, BOOKE_PAGESZ_1G, 1),
 
 	/*
 	 * TLB 2:	256M	Non-cacheable, guarded
 	 */
-	SET_TLB_ENTRY(1, CFG_PCI_PHYS, CFG_PCI_PHYS,
+	SET_TLB_ENTRY(1, CONFIG_SYS_PCI_PHYS, CONFIG_SYS_PCI_PHYS,
 		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 		      0, 2, BOOKE_PAGESZ_256M, 1),
 
 	/*
 	 * TLB 3:	256M	Non-cacheable, guarded
 	 */
-	SET_TLB_ENTRY(1, CFG_PCI_PHYS + 0x10000000, CFG_PCI_PHYS + 0x10000000,
+	SET_TLB_ENTRY(1, CONFIG_SYS_PCI_PHYS + 0x10000000, CONFIG_SYS_PCI_PHYS + 0x10000000,
 		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 		      0, 3, BOOKE_PAGESZ_256M, 1),
 
@@ -75,7 +75,7 @@ struct fsl_e_tlb_entry tlb_table[] = {
 	 * 0xe000_0000	1M	CCSRBAR
 	 * 0xe100_0000	255M	PCI IO range
 	 */
-	SET_TLB_ENTRY(1, CFG_CCSRBAR, CFG_CCSRBAR_PHYS,
+	SET_TLB_ENTRY(1, CONFIG_SYS_CCSRBAR, CONFIG_SYS_CCSRBAR_PHYS,
 		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 		      0, 4, BOOKE_PAGESZ_64M, 1),
 
@@ -83,7 +83,7 @@ struct fsl_e_tlb_entry tlb_table[] = {
 	 * TLB 5:	64M	Non-cacheable, guarded
 	 * 0xf8000000	64M	PIXIS 0xF8000000 - 0xFBFFFFFF
 	 */
-	SET_TLB_ENTRY(1, CFG_LBC_NONCACHE_BASE, CFG_LBC_NONCACHE_BASE,
+	SET_TLB_ENTRY(1, CONFIG_SYS_LBC_NONCACHE_BASE, CONFIG_SYS_LBC_NONCACHE_BASE,
 		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 		      0, 5, BOOKE_PAGESZ_64M, 1),
 };
diff --git a/board/freescale/mpc8548cds/ddr.c b/board/freescale/mpc8548cds/ddr.c
index f07d746c2..ab64fa88f 100644
--- a/board/freescale/mpc8548cds/ddr.c
+++ b/board/freescale/mpc8548cds/ddr.c
@@ -10,6 +10,7 @@
 #include <i2c.h>
 
 #include <asm/fsl_ddr_sdram.h>
+#include <asm/fsl_ddr_dimm_params.h>
 
 static void
 get_spd(ddr2_spd_eeprom_t *spd, unsigned char i2c_address)
@@ -37,7 +38,9 @@ void fsl_ddr_get_spd(ddr2_spd_eeprom_t *ctrl_dimms_spd,
 	}
 }
 
-void fsl_ddr_board_options(memctl_options_t *popts, unsigned int ctrl_num)
+void fsl_ddr_board_options(memctl_options_t *popts,
+				dimm_params_t *pdimm,
+				unsigned int ctrl_num)
 {
 	/*
 	 * Factors to consider for clock adjust:
diff --git a/board/freescale/mpc8548cds/law.c b/board/freescale/mpc8548cds/law.c
index 34b9d1c4d..98748aa47 100644
--- a/board/freescale/mpc8548cds/law.c
+++ b/board/freescale/mpc8548cds/law.c
@@ -51,22 +51,22 @@
  */
 
 struct law_entry law_table[] = {
-#ifdef CFG_PCI1_MEM_PHYS
-	SET_LAW(CFG_PCI1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI),
-	SET_LAW(CFG_PCI1_IO_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_PCI),
+#ifdef CONFIG_SYS_PCI1_MEM_PHYS
+	SET_LAW(CONFIG_SYS_PCI1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI),
+	SET_LAW(CONFIG_SYS_PCI1_IO_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_PCI),
 #endif
-#ifdef CFG_PCI2_MEM_PHYS
-	SET_LAW(CFG_PCI2_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI_2),
-	SET_LAW(CFG_PCI2_IO_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_PCI_2),
+#ifdef CONFIG_SYS_PCI2_MEM_PHYS
+	SET_LAW(CONFIG_SYS_PCI2_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI_2),
+	SET_LAW(CONFIG_SYS_PCI2_IO_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_PCI_2),
 #endif
-#ifdef CFG_PCIE1_MEM_PHYS
-	SET_LAW(CFG_PCIE1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCIE_1),
-	SET_LAW(CFG_PCIE1_IO_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_PCIE_1),
+#ifdef CONFIG_SYS_PCIE1_MEM_PHYS
+	SET_LAW(CONFIG_SYS_PCIE1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCIE_1),
+	SET_LAW(CONFIG_SYS_PCIE1_IO_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_PCIE_1),
 #endif
 	/* LBC window - maps 256M 0xf0000000 -> 0xffffffff */
-	SET_LAW(CFG_LBC_SDRAM_BASE, LAW_SIZE_256M, LAW_TRGT_IF_LBC),
-#ifdef CFG_RIO_MEM_PHYS
-	SET_LAW(CFG_RIO_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_RIO),
+	SET_LAW(CONFIG_SYS_LBC_SDRAM_BASE, LAW_SIZE_256M, LAW_TRGT_IF_LBC),
+#ifdef CONFIG_SYS_RIO_MEM_PHYS
+	SET_LAW(CONFIG_SYS_RIO_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_RIO),
 #endif
 };
 
diff --git a/board/freescale/mpc8548cds/mpc8548cds.c b/board/freescale/mpc8548cds/mpc8548cds.c
index 84d3850cc..c562fc9d9 100644
--- a/board/freescale/mpc8548cds/mpc8548cds.c
+++ b/board/freescale/mpc8548cds/mpc8548cds.c
@@ -38,10 +38,6 @@
 #include "../common/eeprom.h"
 #include "../common/via.h"
 
-#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
-extern void ddr_enable_ecc(unsigned int dram_size);
-#endif
-
 DECLARE_GLOBAL_DATA_PTR;
 
 void local_bus_init(void);
@@ -49,14 +45,13 @@ void sdram_init(void);
 
 int checkboard (void)
 {
-	volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR);
-	volatile ccsr_local_ecm_t *ecm = (void *)(CFG_MPC85xx_ECM_ADDR);
+	volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+	volatile ccsr_local_ecm_t *ecm = (void *)(CONFIG_SYS_MPC85xx_ECM_ADDR);
 
 	/* PCI slot in USER bits CSR[6:7] by convention. */
 	uint pci_slot = get_pci_slot ();
 
 	uint cpu_board_rev = get_cpu_board_revision ();
-	uint svr;
 
 	printf ("Board: CDS Version 0x%02x, PCI Slot %d\n",
 		get_board_version (), pci_slot);
@@ -69,17 +64,6 @@ int checkboard (void)
 	 */
 	local_bus_init ();
 
-	svr = get_svr();
-
-	/*
-	 * Fix CPU2 errata: A core hang possible while executing a
-	 * msync instruction and a snoopable transaction from an I/O
-	 * master tagged to make quick forward progress is present.
-	 * Fixed in Silicon Rev.2.1
-	 */
-	if (!(SVR_MAJ(svr) >= 2 && SVR_MIN(svr) >= 1))
-		ecm->eebpcr |= (1 << 16);
-
 	/*
 	 * Hack TSEC 3 and 4 IO voltages.
 	 */
@@ -106,7 +90,7 @@ initdram(int board_type)
 		 *    Override DLL = 1, Course Adj = 1, Tap Select = 0
 		 */
 
-		volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR);
+		volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
 
 		gur->ddrdllcr = 0x81000000;
 		asm("sync;isync;msync");
@@ -118,13 +102,6 @@ initdram(int board_type)
 	dram_size = setup_ddr_tlbs(dram_size / 0x100000);
 	dram_size *= 0x100000;
 
-#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
-	/*
-	 * Initialize and enable DDR ECC.
-	 */
-	ddr_enable_ecc(dram_size);
-#endif
-
 	/*
 	 * SDRAM Initialization
 	 */
@@ -140,8 +117,8 @@ initdram(int board_type)
 void
 local_bus_init(void)
 {
-	volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR);
-	volatile ccsr_lbc_t *lbc = (void *)(CFG_MPC85xx_LBC_ADDR);
+	volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+	volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR);
 
 	uint clkdiv;
 	uint lbc_hz;
@@ -174,46 +151,46 @@ local_bus_init(void)
 void
 sdram_init(void)
 {
-#if defined(CFG_OR2_PRELIM) && defined(CFG_BR2_PRELIM)
+#if defined(CONFIG_SYS_OR2_PRELIM) && defined(CONFIG_SYS_BR2_PRELIM)
 
 	uint idx;
-	volatile ccsr_lbc_t *lbc = (void *)(CFG_MPC85xx_LBC_ADDR);
-	uint *sdram_addr = (uint *)CFG_LBC_SDRAM_BASE;
+	volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR);
+	uint *sdram_addr = (uint *)CONFIG_SYS_LBC_SDRAM_BASE;
 	uint cpu_board_rev;
 	uint lsdmr_common;
 
 	puts("    SDRAM: ");
 
-	print_size (CFG_LBC_SDRAM_SIZE * 1024 * 1024, "\n");
+	print_size (CONFIG_SYS_LBC_SDRAM_SIZE * 1024 * 1024, "\n");
 
 	/*
 	 * Setup SDRAM Base and Option Registers
 	 */
-	lbc->or2 = CFG_OR2_PRELIM;
+	lbc->or2 = CONFIG_SYS_OR2_PRELIM;
 	asm("msync");
 
-	lbc->br2 = CFG_BR2_PRELIM;
+	lbc->br2 = CONFIG_SYS_BR2_PRELIM;
 	asm("msync");
 
-	lbc->lbcr = CFG_LBC_LBCR;
+	lbc->lbcr = CONFIG_SYS_LBC_LBCR;
 	asm("msync");
 
 
-	lbc->lsrt = CFG_LBC_LSRT;
-	lbc->mrtpr = CFG_LBC_MRTPR;
+	lbc->lsrt = CONFIG_SYS_LBC_LSRT;
+	lbc->mrtpr = CONFIG_SYS_LBC_MRTPR;
 	asm("msync");
 
 	/*
 	 * MPC8548 uses "new" 15-16 style addressing.
 	 */
 	cpu_board_rev = get_cpu_board_revision();
-	lsdmr_common = CFG_LBC_LSDMR_COMMON;
-	lsdmr_common |= CFG_LBC_LSDMR_BSMA1516;
+	lsdmr_common = CONFIG_SYS_LBC_LSDMR_COMMON;
+	lsdmr_common |= CONFIG_SYS_LBC_LSDMR_BSMA1516;
 
 	/*
 	 * Issue PRECHARGE ALL command.
 	 */
-	lbc->lsdmr = lsdmr_common | CFG_LBC_LSDMR_OP_PCHALL;
+	lbc->lsdmr = lsdmr_common | CONFIG_SYS_LBC_LSDMR_OP_PCHALL;
 	asm("sync;msync");
 	*sdram_addr = 0xff;
 	ppcDcbf((unsigned long) sdram_addr);
@@ -223,7 +200,7 @@ sdram_init(void)
 	 * Issue 8 AUTO REFRESH commands.
 	 */
 	for (idx = 0; idx < 8; idx++) {
-		lbc->lsdmr = lsdmr_common | CFG_LBC_LSDMR_OP_ARFRSH;
+		lbc->lsdmr = lsdmr_common | CONFIG_SYS_LBC_LSDMR_OP_ARFRSH;
 		asm("sync;msync");
 		*sdram_addr = 0xff;
 		ppcDcbf((unsigned long) sdram_addr);
@@ -233,7 +210,7 @@ sdram_init(void)
 	/*
 	 * Issue 8 MODE-set command.
 	 */
-	lbc->lsdmr = lsdmr_common | CFG_LBC_LSDMR_OP_MRW;
+	lbc->lsdmr = lsdmr_common | CONFIG_SYS_LBC_LSDMR_OP_MRW;
 	asm("sync;msync");
 	*sdram_addr = 0xff;
 	ppcDcbf((unsigned long) sdram_addr);
@@ -242,7 +219,7 @@ sdram_init(void)
 	/*
 	 * Issue NORMAL OP command.
 	 */
-	lbc->lsdmr = lsdmr_common | CFG_LBC_LSDMR_OP_NORMAL;
+	lbc->lsdmr = lsdmr_common | CONFIG_SYS_LBC_LSDMR_OP_NORMAL;
 	asm("sync;msync");
 	*sdram_addr = 0xff;
 	ppcDcbf((unsigned long) sdram_addr);
@@ -285,22 +262,25 @@ static struct pci_controller pci2_hose;
 static struct pci_controller pcie1_hose;
 #endif	/* CONFIG_PCIE1 */
 
+extern int fsl_pci_setup_inbound_windows(struct pci_region *r);
+extern void fsl_pci_init(struct pci_controller *hose);
+
 int first_free_busno=0;
 
 void
 pci_init_board(void)
 {
-	volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR);
+	volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
 	uint io_sel = (gur->pordevsr & MPC85xx_PORDEVSR_IO_SEL) >> 19;
 	uint host_agent = (gur->porbmsr & MPC85xx_PORBMSR_HA) >> 16;
 
 
 #ifdef CONFIG_PCI1
 {
-	volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CFG_PCI1_ADDR;
-	extern void fsl_pci_init(struct pci_controller *hose);
+	volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCI1_ADDR;
 	struct pci_controller *hose = &pci1_hose;
 	struct pci_config_table *table;
+	struct pci_region *r = hose->regions;
 
 	uint pci_32 = gur->pordevsr & MPC85xx_PORDEVSR_PCI1_PCI32;	/* PORDEVSR[15] */
 	uint pci_arb = gur->pordevsr & MPC85xx_PORDEVSR_PCI1_ARB;	/* PORDEVSR[14] */
@@ -322,27 +302,22 @@ pci_init_board(void)
 
 
 		/* inbound */
-		pci_set_region(hose->regions + 0,
-			       CFG_PCI_MEMORY_BUS,
-			       CFG_PCI_MEMORY_PHYS,
-			       CFG_PCI_MEMORY_SIZE,
-			       PCI_REGION_MEM | PCI_REGION_MEMORY);
-
+		r += fsl_pci_setup_inbound_windows(r);
 
 		/* outbound memory */
-		pci_set_region(hose->regions + 1,
-			       CFG_PCI1_MEM_BASE,
-			       CFG_PCI1_MEM_PHYS,
-			       CFG_PCI1_MEM_SIZE,
+		pci_set_region(r++,
+			       CONFIG_SYS_PCI1_MEM_BASE,
+			       CONFIG_SYS_PCI1_MEM_PHYS,
+			       CONFIG_SYS_PCI1_MEM_SIZE,
 			       PCI_REGION_MEM);
 
 		/* outbound io */
-		pci_set_region(hose->regions + 2,
-			       CFG_PCI1_IO_BASE,
-			       CFG_PCI1_IO_PHYS,
-			       CFG_PCI1_IO_SIZE,
+		pci_set_region(r++,
+			       CONFIG_SYS_PCI1_IO_BASE,
+			       CONFIG_SYS_PCI1_IO_PHYS,
+			       CONFIG_SYS_PCI1_IO_SIZE,
 			       PCI_REGION_IO);
-		hose->region_count = 3;
+		hose->region_count = r - hose->regions;
 
 		/* relocate config table pointers */
 		hose->config_table = \
@@ -357,7 +332,7 @@ pci_init_board(void)
 		first_free_busno=hose->last_busno+1;
 		printf ("PCI on bus %02x - %02x\n",hose->first_busno,hose->last_busno);
 #ifdef CONFIG_PCIX_CHECK
-		if (!(gur->pordevsr & PORDEVSR_PCI)) {
+		if (!(gur->pordevsr & MPC85xx_PORDEVSR_PCI1)) {
 			/* PCI-X init */
 			if (CONFIG_SYS_CLK_FREQ < 66000000)
 				printf("PCI-X will only work at 66 MHz\n");
@@ -392,10 +367,10 @@ pci_init_board(void)
 
 #ifdef CONFIG_PCIE1
 {
-	volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CFG_PCIE1_ADDR;
-	extern void fsl_pci_init(struct pci_controller *hose);
+	volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCIE1_ADDR;
 	struct pci_controller *hose = &pcie1_hose;
 	int pcie_ep =  (host_agent == 0) || (host_agent == 2 ) || (host_agent == 3);
+	struct pci_region *r = hose->regions;
 
 	int pcie_configured  = io_sel >= 1;
 
@@ -411,27 +386,23 @@ pci_init_board(void)
 		printf ("\n");
 
 		/* inbound */
-		pci_set_region(hose->regions + 0,
-			       CFG_PCI_MEMORY_BUS,
-			       CFG_PCI_MEMORY_PHYS,
-			       CFG_PCI_MEMORY_SIZE,
-			       PCI_REGION_MEM | PCI_REGION_MEMORY);
+		r += fsl_pci_setup_inbound_windows(r);
 
 		/* outbound memory */
-		pci_set_region(hose->regions + 1,
-			       CFG_PCIE1_MEM_BASE,
-			       CFG_PCIE1_MEM_PHYS,
-			       CFG_PCIE1_MEM_SIZE,
+		pci_set_region(r++,
+			       CONFIG_SYS_PCIE1_MEM_BASE,
+			       CONFIG_SYS_PCIE1_MEM_PHYS,
+			       CONFIG_SYS_PCIE1_MEM_SIZE,
 			       PCI_REGION_MEM);
 
 		/* outbound io */
-		pci_set_region(hose->regions + 2,
-			       CFG_PCIE1_IO_BASE,
-			       CFG_PCIE1_IO_PHYS,
-			       CFG_PCIE1_IO_SIZE,
+		pci_set_region(r++,
+			       CONFIG_SYS_PCIE1_IO_BASE,
+			       CONFIG_SYS_PCIE1_IO_PHYS,
+			       CONFIG_SYS_PCIE1_IO_SIZE,
 			       PCI_REGION_IO);
 
-		hose->region_count = 3;
+		hose->region_count = r - hose->regions;
 
 		hose->first_busno=first_free_busno;
 		pci_setup_indirect(hose, (int) &pci->cfg_addr, (int) &pci->cfg_data);
@@ -484,29 +455,16 @@ int last_stage_init(void)
 
 
 #if defined(CONFIG_OF_BOARD_SETUP)
-void
-ft_pci_setup(void *blob, bd_t *bd)
-{
-	int node, tmp[2];
-	const char *path;
+extern void ft_fsl_pci_setup(void *blob, const char *pci_alias,
+			struct pci_controller *hose);
 
-	node = fdt_path_offset(blob, "/aliases");
-	tmp[0] = 0;
-	if (node >= 0) {
+void ft_pci_setup(void *blob, bd_t *bd)
+{
 #ifdef CONFIG_PCI1
-		path = fdt_getprop(blob, node, "pci0", NULL);
-		if (path) {
-			tmp[1] = pci1_hose.last_busno - pci1_hose.first_busno;
-			do_fixup_by_path(blob, path, "bus-range", &tmp, 8, 1);
-		}
+	ft_fsl_pci_setup(blob, "pci0", &pci1_hose);
 #endif
 #ifdef CONFIG_PCIE1
-		path = fdt_getprop(blob, node, "pci1", NULL);
-		if (path) {
-			tmp[1] = pcie1_hose.last_busno - pcie1_hose.first_busno;
-			do_fixup_by_path(blob, path, "bus-range", &tmp, 8, 1);
-		}
+	ft_fsl_pci_setup(blob, "pci1", &pcie1_hose);
 #endif
-	}
 }
 #endif
diff --git a/board/freescale/mpc8548cds/tlb.c b/board/freescale/mpc8548cds/tlb.c
index ab99af7e1..eab212a4c 100644
--- a/board/freescale/mpc8548cds/tlb.c
+++ b/board/freescale/mpc8548cds/tlb.c
@@ -28,16 +28,16 @@
 
 struct fsl_e_tlb_entry tlb_table[] = {
 	/* TLB 0 - for temp stack in cache */
-	SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR, CFG_INIT_RAM_ADDR,
+	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR, CONFIG_SYS_INIT_RAM_ADDR,
 		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
 		      0, 0, BOOKE_PAGESZ_4K, 0),
-	SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR + 4 * 1024 , CFG_INIT_RAM_ADDR + 4 * 1024,
+	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024 , CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024,
 		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
 		      0, 0, BOOKE_PAGESZ_4K, 0),
-	SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR + 8 * 1024 , CFG_INIT_RAM_ADDR + 8 * 1024,
+	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024 , CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024,
 		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
 		      0, 0, BOOKE_PAGESZ_4K, 0),
-	SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR + 12 * 1024 , CFG_INIT_RAM_ADDR + 12 * 1024,
+	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024 , CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024,
 		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
 		      0, 0, BOOKE_PAGESZ_4K, 0),
 
@@ -46,7 +46,7 @@ struct fsl_e_tlb_entry tlb_table[] = {
 	 * 0xff000000	16M	FLASH
 	 * Out of reset this entry is only 4K.
 	 */
-	SET_TLB_ENTRY(1, CFG_BOOT_BLOCK, CFG_BOOT_BLOCK,
+	SET_TLB_ENTRY(1, CONFIG_SYS_BOOT_BLOCK, CONFIG_SYS_BOOT_BLOCK,
 		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 		      0, 0, BOOKE_PAGESZ_16M, 1),
 
@@ -54,22 +54,22 @@ struct fsl_e_tlb_entry tlb_table[] = {
 	 * TLB 1:	1G	Non-cacheable, guarded
 	 * 0x80000000	1G	PCI1/PCIE  8,9,a,b
 	 */
-	SET_TLB_ENTRY(1, CFG_PCI_PHYS, CFG_PCI_PHYS,
+	SET_TLB_ENTRY(1, CONFIG_SYS_PCI_PHYS, CONFIG_SYS_PCI_PHYS,
 		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 		      0, 1, BOOKE_PAGESZ_1G, 1),
 
-#ifdef CFG_RIO_MEM_PHYS
+#ifdef CONFIG_SYS_RIO_MEM_PHYS
 	/*
 	 * TLB 2:	256M	Non-cacheable, guarded
 	 */
-	SET_TLB_ENTRY(1, CFG_RIO_MEM_BASE, CFG_RIO_MEM_BASE,
+	SET_TLB_ENTRY(1, CONFIG_SYS_RIO_MEM_BASE, CONFIG_SYS_RIO_MEM_BASE,
 		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 		      0, 2, BOOKE_PAGESZ_256M, 1),
 
 	/*
 	 * TLB 3:	256M	Non-cacheable, guarded
 	 */
-	SET_TLB_ENTRY(1, CFG_RIO_MEM_BASE + 0x10000000, CFG_RIO_MEM_BASE + 0x10000000,
+	SET_TLB_ENTRY(1, CONFIG_SYS_RIO_MEM_BASE + 0x10000000, CONFIG_SYS_RIO_MEM_BASE + 0x10000000,
 		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 		      0, 3, BOOKE_PAGESZ_256M, 1),
 #endif
@@ -80,7 +80,7 @@ struct fsl_e_tlb_entry tlb_table[] = {
 	 * 0xe210_0000	1M	PCI2 IO
 	 * 0xe300_0000	1M	PCIe IO
 	 */
-	SET_TLB_ENTRY(1, CFG_CCSRBAR, CFG_CCSRBAR_PHYS,
+	SET_TLB_ENTRY(1, CONFIG_SYS_CCSRBAR, CONFIG_SYS_CCSRBAR_PHYS,
 		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 		      0, 5, BOOKE_PAGESZ_64M, 1),
 
@@ -88,7 +88,7 @@ struct fsl_e_tlb_entry tlb_table[] = {
 	 * TLB 6:	64M	Cacheable, non-guarded
 	 * 0xf000_0000	64M	LBC SDRAM
 	 */
-	SET_TLB_ENTRY(1, CFG_LBC_CACHE_BASE, CFG_LBC_CACHE_BASE,
+	SET_TLB_ENTRY(1, CONFIG_SYS_LBC_CACHE_BASE, CONFIG_SYS_LBC_CACHE_BASE,
 		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
 		      0, 6, BOOKE_PAGESZ_64M, 1),
 
@@ -96,7 +96,7 @@ struct fsl_e_tlb_entry tlb_table[] = {
 	 * TLB 7:	64M	Non-cacheable, guarded
 	 * 0xf8000000	64M	CADMUS registers, relocated L2SRAM
 	 */
-	SET_TLB_ENTRY(1, CFG_LBC_NONCACHE_BASE, CFG_LBC_NONCACHE_BASE,
+	SET_TLB_ENTRY(1, CONFIG_SYS_LBC_NONCACHE_BASE, CONFIG_SYS_LBC_NONCACHE_BASE,
 		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 		      0, 7, BOOKE_PAGESZ_64M, 1),
 };
diff --git a/board/freescale/mpc8555cds/ddr.c b/board/freescale/mpc8555cds/ddr.c
index 11ce57d36..c84a6cbe1 100644
--- a/board/freescale/mpc8555cds/ddr.c
+++ b/board/freescale/mpc8555cds/ddr.c
@@ -10,6 +10,7 @@
 #include <i2c.h>
 
 #include <asm/fsl_ddr_sdram.h>
+#include <asm/fsl_ddr_dimm_params.h>
 
 static void
 get_spd(ddr1_spd_eeprom_t *spd, unsigned char i2c_address)
@@ -36,7 +37,9 @@ void fsl_ddr_get_spd(ddr1_spd_eeprom_t *ctrl_dimms_spd,
 	}
 }
 
-void fsl_ddr_board_options(memctl_options_t *popts, unsigned int ctrl_num)
+void fsl_ddr_board_options(memctl_options_t *popts,
+				dimm_params_t *pdimm,
+				unsigned int ctrl_num)
 {
 	/*
 	 * Factors to consider for clock adjust:
diff --git a/board/freescale/mpc8555cds/law.c b/board/freescale/mpc8555cds/law.c
index fbf2bdc07..8e3de22a4 100644
--- a/board/freescale/mpc8555cds/law.c
+++ b/board/freescale/mpc8555cds/law.c
@@ -47,12 +47,12 @@
  */
 
 struct law_entry law_table[] = {
-	SET_LAW(CFG_PCI1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI),
-	SET_LAW(CFG_PCI2_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI_2),
-	SET_LAW(CFG_PCI1_IO_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_PCI),
-	SET_LAW(CFG_PCI2_IO_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_PCI_2),
+	SET_LAW(CONFIG_SYS_PCI1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI),
+	SET_LAW(CONFIG_SYS_PCI2_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI_2),
+	SET_LAW(CONFIG_SYS_PCI1_IO_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_PCI),
+	SET_LAW(CONFIG_SYS_PCI2_IO_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_PCI_2),
 	/* LBC window - maps 256M 0xf0000000 -> 0xffffffff */
-	SET_LAW(CFG_LBC_SDRAM_BASE, LAW_SIZE_256M, LAW_TRGT_IF_LBC),
+	SET_LAW(CONFIG_SYS_LBC_SDRAM_BASE, LAW_SIZE_256M, LAW_TRGT_IF_LBC),
 };
 
 int num_law_entries = ARRAY_SIZE(law_table);
diff --git a/board/freescale/mpc8555cds/mpc8555cds.c b/board/freescale/mpc8555cds/mpc8555cds.c
index 826056a84..33685c19f 100644
--- a/board/freescale/mpc8555cds/mpc8555cds.c
+++ b/board/freescale/mpc8555cds/mpc8555cds.c
@@ -198,7 +198,7 @@ const iop_conf_t iop_conf_tab[4][32] = {
 
 int checkboard (void)
 {
-	volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR);
+	volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
 
 	/* PCI slot in USER bits CSR[6:7] by convention. */
 	uint pci_slot = get_pci_slot ();
@@ -256,7 +256,7 @@ initdram(int board_type)
 		 *    Override DLL = 1, Course Adj = 1, Tap Select = 0
 		 */
 
-		volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR);
+		volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
 
 		gur->ddrdllcr = 0x81000000;
 		asm("sync;isync;msync");
@@ -290,8 +290,8 @@ initdram(int board_type)
 void
 local_bus_init(void)
 {
-	volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR);
-	volatile ccsr_lbc_t *lbc = (void *)(CFG_MPC85xx_LBC_ADDR);
+	volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+	volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR);
 
 	uint clkdiv;
 	uint lbc_hz;
@@ -302,8 +302,8 @@ local_bus_init(void)
 	 * Errata LBC11.
 	 * Fix Local Bus clock glitch when DLL is enabled.
 	 *
-	 * If localbus freq is < 66Mhz, DLL bypass mode must be used.
-	 * If localbus freq is > 133Mhz, DLL can be safely enabled.
+	 * If localbus freq is < 66MHz, DLL bypass mode must be used.
+	 * If localbus freq is > 133MHz, DLL can be safely enabled.
 	 * Between 66 and 133, the DLL is enabled with an override workaround.
 	 */
 
@@ -337,55 +337,55 @@ local_bus_init(void)
 void
 sdram_init(void)
 {
-#if defined(CFG_OR2_PRELIM) && defined(CFG_BR2_PRELIM)
+#if defined(CONFIG_SYS_OR2_PRELIM) && defined(CONFIG_SYS_BR2_PRELIM)
 
 	uint idx;
-	volatile ccsr_lbc_t *lbc = (void *)(CFG_MPC85xx_LBC_ADDR);
-	uint *sdram_addr = (uint *)CFG_LBC_SDRAM_BASE;
+	volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR);
+	uint *sdram_addr = (uint *)CONFIG_SYS_LBC_SDRAM_BASE;
 	uint cpu_board_rev;
 	uint lsdmr_common;
 
 	puts("    SDRAM: ");
 
-	print_size (CFG_LBC_SDRAM_SIZE * 1024 * 1024, "\n");
+	print_size (CONFIG_SYS_LBC_SDRAM_SIZE * 1024 * 1024, "\n");
 
 	/*
 	 * Setup SDRAM Base and Option Registers
 	 */
-	lbc->or2 = CFG_OR2_PRELIM;
+	lbc->or2 = CONFIG_SYS_OR2_PRELIM;
 	asm("msync");
 
-	lbc->br2 = CFG_BR2_PRELIM;
+	lbc->br2 = CONFIG_SYS_BR2_PRELIM;
 	asm("msync");
 
-	lbc->lbcr = CFG_LBC_LBCR;
+	lbc->lbcr = CONFIG_SYS_LBC_LBCR;
 	asm("msync");
 
-	lbc->lsrt = CFG_LBC_LSRT;
-	lbc->mrtpr = CFG_LBC_MRTPR;
+	lbc->lsrt = CONFIG_SYS_LBC_LSRT;
+	lbc->mrtpr = CONFIG_SYS_LBC_MRTPR;
 	asm("msync");
 
 	/*
 	 * Determine which address lines to use baed on CPU board rev.
 	 */
 	cpu_board_rev = get_cpu_board_revision();
-	lsdmr_common = CFG_LBC_LSDMR_COMMON;
+	lsdmr_common = CONFIG_SYS_LBC_LSDMR_COMMON;
 	if (cpu_board_rev == MPC85XX_CPU_BOARD_REV_1_0) {
-		lsdmr_common |= CFG_LBC_LSDMR_BSMA1617;
+		lsdmr_common |= CONFIG_SYS_LBC_LSDMR_BSMA1617;
 	} else if (cpu_board_rev == MPC85XX_CPU_BOARD_REV_1_1) {
-		lsdmr_common |= CFG_LBC_LSDMR_BSMA1516;
+		lsdmr_common |= CONFIG_SYS_LBC_LSDMR_BSMA1516;
 	} else {
 		/*
 		 * Assume something unable to identify itself is
 		 * really old, and likely has lines 16/17 mapped.
 		 */
-		lsdmr_common |= CFG_LBC_LSDMR_BSMA1617;
+		lsdmr_common |= CONFIG_SYS_LBC_LSDMR_BSMA1617;
 	}
 
 	/*
 	 * Issue PRECHARGE ALL command.
 	 */
-	lbc->lsdmr = lsdmr_common | CFG_LBC_LSDMR_OP_PCHALL;
+	lbc->lsdmr = lsdmr_common | CONFIG_SYS_LBC_LSDMR_OP_PCHALL;
 	asm("sync;msync");
 	*sdram_addr = 0xff;
 	ppcDcbf((unsigned long) sdram_addr);
@@ -395,7 +395,7 @@ sdram_init(void)
 	 * Issue 8 AUTO REFRESH commands.
 	 */
 	for (idx = 0; idx < 8; idx++) {
-		lbc->lsdmr = lsdmr_common | CFG_LBC_LSDMR_OP_ARFRSH;
+		lbc->lsdmr = lsdmr_common | CONFIG_SYS_LBC_LSDMR_OP_ARFRSH;
 		asm("sync;msync");
 		*sdram_addr = 0xff;
 		ppcDcbf((unsigned long) sdram_addr);
@@ -405,7 +405,7 @@ sdram_init(void)
 	/*
 	 * Issue 8 MODE-set command.
 	 */
-	lbc->lsdmr = lsdmr_common | CFG_LBC_LSDMR_OP_MRW;
+	lbc->lsdmr = lsdmr_common | CONFIG_SYS_LBC_LSDMR_OP_MRW;
 	asm("sync;msync");
 	*sdram_addr = 0xff;
 	ppcDcbf((unsigned long) sdram_addr);
@@ -414,7 +414,7 @@ sdram_init(void)
 	/*
 	 * Issue NORMAL OP command.
 	 */
-	lbc->lsdmr = lsdmr_common | CFG_LBC_LSDMR_OP_NORMAL;
+	lbc->lsdmr = lsdmr_common | CONFIG_SYS_LBC_LSDMR_OP_NORMAL;
 	asm("sync;msync");
 	*sdram_addr = 0xff;
 	ppcDcbf((unsigned long) sdram_addr);
diff --git a/board/freescale/mpc8555cds/tlb.c b/board/freescale/mpc8555cds/tlb.c
index c5434a069..bf957c08c 100644
--- a/board/freescale/mpc8555cds/tlb.c
+++ b/board/freescale/mpc8555cds/tlb.c
@@ -28,16 +28,16 @@
 
 struct fsl_e_tlb_entry tlb_table[] = {
 	/* TLB 0 - for temp stack in cache */
-	SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR, CFG_INIT_RAM_ADDR,
+	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR, CONFIG_SYS_INIT_RAM_ADDR,
 		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
 		      0, 0, BOOKE_PAGESZ_4K, 0),
-	SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR + 4 * 1024 , CFG_INIT_RAM_ADDR + 4 * 1024,
+	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024 , CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024,
 		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
 		      0, 0, BOOKE_PAGESZ_4K, 0),
-	SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR + 8 * 1024 , CFG_INIT_RAM_ADDR + 8 * 1024,
+	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024 , CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024,
 		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
 		      0, 0, BOOKE_PAGESZ_4K, 0),
-	SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR + 12 * 1024 , CFG_INIT_RAM_ADDR + 12 * 1024,
+	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024 , CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024,
 		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
 		      0, 0, BOOKE_PAGESZ_4K, 0),
 
@@ -46,7 +46,7 @@ struct fsl_e_tlb_entry tlb_table[] = {
 	 * 0xff000000	16M	FLASH
 	 * Out of reset this entry is only 4K.
 	 */
-	SET_TLB_ENTRY(1, CFG_FLASH_BASE, CFG_FLASH_BASE,
+	SET_TLB_ENTRY(1, CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE,
 		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 		      0, 0, BOOKE_PAGESZ_16M, 1),
 
@@ -54,7 +54,7 @@ struct fsl_e_tlb_entry tlb_table[] = {
 	 * TLB 1:	256M	Non-cacheable, guarded
 	 * 0x80000000	256M	PCI1 MEM First half
 	 */
-	SET_TLB_ENTRY(1, CFG_PCI1_MEM_PHYS, CFG_PCI1_MEM_PHYS,
+	SET_TLB_ENTRY(1, CONFIG_SYS_PCI1_MEM_PHYS, CONFIG_SYS_PCI1_MEM_PHYS,
 		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 		      0, 1, BOOKE_PAGESZ_256M, 1),
 
@@ -62,7 +62,7 @@ struct fsl_e_tlb_entry tlb_table[] = {
 	 * TLB 2:	256M	Non-cacheable, guarded
 	 * 0x90000000	256M	PCI1 MEM Second half
 	 */
-	SET_TLB_ENTRY(1, CFG_PCI1_MEM_PHYS + 0x10000000, CFG_PCI1_MEM_PHYS + 0x10000000,
+	SET_TLB_ENTRY(1, CONFIG_SYS_PCI1_MEM_PHYS + 0x10000000, CONFIG_SYS_PCI1_MEM_PHYS + 0x10000000,
 		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 		      0, 2, BOOKE_PAGESZ_256M, 1),
 
@@ -70,7 +70,7 @@ struct fsl_e_tlb_entry tlb_table[] = {
 	 * TLB 3:	256M	Non-cacheable, guarded
 	 * 0xa0000000	256M	PCI2 MEM First half
 	 */
-	SET_TLB_ENTRY(1, CFG_PCI2_MEM_PHYS, CFG_PCI2_MEM_PHYS,
+	SET_TLB_ENTRY(1, CONFIG_SYS_PCI2_MEM_PHYS, CONFIG_SYS_PCI2_MEM_PHYS,
 		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 		      0, 3, BOOKE_PAGESZ_256M, 1),
 
@@ -78,7 +78,7 @@ struct fsl_e_tlb_entry tlb_table[] = {
 	 * TLB 4:	256M	Non-cacheable, guarded
 	 * 0xb0000000	256M	PCI2 MEM Second half
 	 */
-	SET_TLB_ENTRY(1, CFG_PCI2_MEM_PHYS + 0x10000000, CFG_PCI2_MEM_PHYS + 0x10000000,
+	SET_TLB_ENTRY(1, CONFIG_SYS_PCI2_MEM_PHYS + 0x10000000, CONFIG_SYS_PCI2_MEM_PHYS + 0x10000000,
 		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 		      0, 4, BOOKE_PAGESZ_256M, 1),
 
@@ -88,7 +88,7 @@ struct fsl_e_tlb_entry tlb_table[] = {
 	 * 0xe200_0000	16M	PCI1 IO
 	 * 0xe300_0000	16M	PCI2 IO
 	 */
-	SET_TLB_ENTRY(1, CFG_CCSRBAR, CFG_CCSRBAR_PHYS,
+	SET_TLB_ENTRY(1, CONFIG_SYS_CCSRBAR, CONFIG_SYS_CCSRBAR_PHYS,
 		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 		      0, 5, BOOKE_PAGESZ_64M, 1),
 
@@ -96,7 +96,7 @@ struct fsl_e_tlb_entry tlb_table[] = {
 	 * TLB 6:	64M	Cacheable, non-guarded
 	 * 0xf000_0000	64M	LBC SDRAM
 	 */
-	SET_TLB_ENTRY(1, CFG_LBC_SDRAM_BASE, CFG_LBC_SDRAM_BASE,
+	SET_TLB_ENTRY(1, CONFIG_SYS_LBC_SDRAM_BASE, CONFIG_SYS_LBC_SDRAM_BASE,
 		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
 		      0, 6, BOOKE_PAGESZ_64M, 1),
 
diff --git a/board/freescale/mpc8560ads/ddr.c b/board/freescale/mpc8560ads/ddr.c
index 45372f427..7850794d6 100644
--- a/board/freescale/mpc8560ads/ddr.c
+++ b/board/freescale/mpc8560ads/ddr.c
@@ -10,6 +10,7 @@
 #include <i2c.h>
 
 #include <asm/fsl_ddr_sdram.h>
+#include <asm/fsl_ddr_dimm_params.h>
 
 static void
 get_spd(ddr1_spd_eeprom_t *spd, unsigned char i2c_address)
@@ -40,7 +41,9 @@ fsl_ddr_get_spd(ddr1_spd_eeprom_t *ctrl_dimms_spd,
 	}
 }
 
-void fsl_ddr_board_options(memctl_options_t *popts, unsigned int ctrl_num)
+void fsl_ddr_board_options(memctl_options_t *popts,
+				dimm_params_t *pdimm,
+				unsigned int ctrl_num)
 {
 	/*
 	 * Factors to consider for CPO:
diff --git a/board/freescale/mpc8560ads/law.c b/board/freescale/mpc8560ads/law.c
index 3b8bd05ad..7dd8f2958 100644
--- a/board/freescale/mpc8560ads/law.c
+++ b/board/freescale/mpc8560ads/law.c
@@ -46,13 +46,13 @@
 
 struct law_entry law_table[] = {
 #ifndef CONFIG_SPD_EEPROM
-	SET_LAW(CFG_DDR_SDRAM_BASE, LAW_SIZE_128M, LAW_TRGT_IF_DDR),
+	SET_LAW(CONFIG_SYS_DDR_SDRAM_BASE, LAW_SIZE_128M, LAW_TRGT_IF_DDR),
 #endif
-	SET_LAW(CFG_PCI1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI),
+	SET_LAW(CONFIG_SYS_PCI1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI),
 	/* This is not so much the SDRAM map as it is the whole localbus map. */
-	SET_LAW(CFG_LBC_SDRAM_BASE, LAW_SIZE_256M, LAW_TRGT_IF_LBC),
-	SET_LAW(CFG_PCI1_IO_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_PCI),
-	SET_LAW(CFG_RIO_MEM_BASE, LAWAR_SIZE_512M, LAW_TRGT_IF_RIO),
+	SET_LAW(CONFIG_SYS_LBC_SDRAM_BASE, LAW_SIZE_256M, LAW_TRGT_IF_LBC),
+	SET_LAW(CONFIG_SYS_PCI1_IO_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_PCI),
+	SET_LAW(CONFIG_SYS_RIO_MEM_BASE, LAWAR_SIZE_512M, LAW_TRGT_IF_RIO),
 };
 
 int num_law_entries = ARRAY_SIZE(law_table);
diff --git a/board/freescale/mpc8560ads/mpc8560ads.c b/board/freescale/mpc8560ads/mpc8560ads.c
index 851fc5706..37308189d 100644
--- a/board/freescale/mpc8560ads/mpc8560ads.c
+++ b/board/freescale/mpc8560ads/mpc8560ads.c
@@ -217,7 +217,7 @@ typedef struct bcsr_ {
 void reset_phy (void)
 {
 #if defined(CONFIG_ETHER_ON_FCC) /* avoid compile warnings for now */
-	volatile bcsr_t *bcsr = (bcsr_t *) CFG_BCSR;
+	volatile bcsr_t *bcsr = (bcsr_t *) CONFIG_SYS_BCSR;
 #endif
 	/* reset Giga bit Ethernet port if needed here */
 
@@ -275,7 +275,7 @@ initdram(int board_type)
 
 #if defined(CONFIG_DDR_DLL)
 	{
-	    volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR);
+	    volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
 	    uint temp_ddrdll = 0;
 
 	    /*
@@ -320,8 +320,8 @@ initdram(int board_type)
 void
 local_bus_init(void)
 {
-	volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR);
-	volatile ccsr_lbc_t *lbc = (void *)(CFG_MPC85xx_LBC_ADDR);
+	volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+	volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR);
 
 	uint clkdiv;
 	uint lbc_hz;
@@ -331,8 +331,8 @@ local_bus_init(void)
 	 * Errata LBC11.
 	 * Fix Local Bus clock glitch when DLL is enabled.
 	 *
-	 * If localbus freq is < 66Mhz, DLL bypass mode must be used.
-	 * If localbus freq is > 133Mhz, DLL can be safely enabled.
+	 * If localbus freq is < 66MHz, DLL bypass mode must be used.
+	 * If localbus freq is > 133MHz, DLL can be safely enabled.
 	 * Between 66 and 133, the DLL is enabled with an override workaround.
 	 */
 
@@ -341,10 +341,10 @@ local_bus_init(void)
 	lbc_hz = sysinfo.freqSystemBus / 1000000 / clkdiv;
 
 	if (lbc_hz < 66) {
-		lbc->lcrr = CFG_LBC_LCRR | 0x80000000;	/* DLL Bypass */
+		lbc->lcrr = CONFIG_SYS_LBC_LCRR | 0x80000000;	/* DLL Bypass */
 
 	} else if (lbc_hz >= 133) {
-		lbc->lcrr = CFG_LBC_LCRR & (~0x80000000); /* DLL Enabled */
+		lbc->lcrr = CONFIG_SYS_LBC_LCRR & (~0x80000000); /* DLL Enabled */
 
 	} else {
 		/*
@@ -359,7 +359,7 @@ local_bus_init(void)
 			lbc->lcrr = 0x10000004;
 		}
 
-		lbc->lcrr = CFG_LBC_LCRR & (~0x80000000);/* DLL Enabled */
+		lbc->lcrr = CONFIG_SYS_LBC_LCRR & (~0x80000000);/* DLL Enabled */
 		udelay(200);
 
 		/*
@@ -380,52 +380,52 @@ local_bus_init(void)
 void
 sdram_init(void)
 {
-	volatile ccsr_lbc_t *lbc = (void *)(CFG_MPC85xx_LBC_ADDR);
-	uint *sdram_addr = (uint *)CFG_LBC_SDRAM_BASE;
+	volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR);
+	uint *sdram_addr = (uint *)CONFIG_SYS_LBC_SDRAM_BASE;
 
 	puts("    SDRAM: ");
-	print_size (CFG_LBC_SDRAM_SIZE * 1024 * 1024, "\n");
+	print_size (CONFIG_SYS_LBC_SDRAM_SIZE * 1024 * 1024, "\n");
 
 	/*
 	 * Setup SDRAM Base and Option Registers
 	 */
-	lbc->or2 = CFG_OR2_PRELIM;
-	lbc->br2 = CFG_BR2_PRELIM;
-	lbc->lbcr = CFG_LBC_LBCR;
+	lbc->or2 = CONFIG_SYS_OR2_PRELIM;
+	lbc->br2 = CONFIG_SYS_BR2_PRELIM;
+	lbc->lbcr = CONFIG_SYS_LBC_LBCR;
 	asm("msync");
 
-	lbc->lsrt = CFG_LBC_LSRT;
-	lbc->mrtpr = CFG_LBC_MRTPR;
+	lbc->lsrt = CONFIG_SYS_LBC_LSRT;
+	lbc->mrtpr = CONFIG_SYS_LBC_MRTPR;
 	asm("sync");
 
 	/*
 	 * Configure the SDRAM controller.
 	 */
-	lbc->lsdmr = CFG_LBC_LSDMR_1;
+	lbc->lsdmr = CONFIG_SYS_LBC_LSDMR_1;
 	asm("sync");
 	*sdram_addr = 0xff;
 	ppcDcbf((unsigned long) sdram_addr);
 	udelay(100);
 
-	lbc->lsdmr = CFG_LBC_LSDMR_2;
+	lbc->lsdmr = CONFIG_SYS_LBC_LSDMR_2;
 	asm("sync");
 	*sdram_addr = 0xff;
 	ppcDcbf((unsigned long) sdram_addr);
 	udelay(100);
 
-	lbc->lsdmr = CFG_LBC_LSDMR_3;
+	lbc->lsdmr = CONFIG_SYS_LBC_LSDMR_3;
 	asm("sync");
 	*sdram_addr = 0xff;
 	ppcDcbf((unsigned long) sdram_addr);
 	udelay(100);
 
-	lbc->lsdmr = CFG_LBC_LSDMR_4;
+	lbc->lsdmr = CONFIG_SYS_LBC_LSDMR_4;
 	asm("sync");
 	*sdram_addr = 0xff;
 	ppcDcbf((unsigned long) sdram_addr);
 	udelay(100);
 
-	lbc->lsdmr = CFG_LBC_LSDMR_5;
+	lbc->lsdmr = CONFIG_SYS_LBC_LSDMR_5;
 	asm("sync");
 	*sdram_addr = 0xff;
 	ppcDcbf((unsigned long) sdram_addr);
@@ -438,15 +438,15 @@ sdram_init(void)
  ************************************************************************/
 long int fixed_sdram (void)
 {
-  #ifndef CFG_RAMBOOT
-	volatile ccsr_ddr_t *ddr= (void *)(CFG_MPC85xx_DDR_ADDR);
-
-	ddr->cs0_bnds = CFG_DDR_CS0_BNDS;
-	ddr->cs0_config = CFG_DDR_CS0_CONFIG;
-	ddr->timing_cfg_1 = CFG_DDR_TIMING_1;
-	ddr->timing_cfg_2 = CFG_DDR_TIMING_2;
-	ddr->sdram_mode = CFG_DDR_MODE;
-	ddr->sdram_interval = CFG_DDR_INTERVAL;
+  #ifndef CONFIG_SYS_RAMBOOT
+	volatile ccsr_ddr_t *ddr= (void *)(CONFIG_SYS_MPC85xx_DDR_ADDR);
+
+	ddr->cs0_bnds = CONFIG_SYS_DDR_CS0_BNDS;
+	ddr->cs0_config = CONFIG_SYS_DDR_CS0_CONFIG;
+	ddr->timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1;
+	ddr->timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2;
+	ddr->sdram_mode = CONFIG_SYS_DDR_MODE;
+	ddr->sdram_interval = CONFIG_SYS_DDR_INTERVAL;
     #if defined (CONFIG_DDR_ECC)
 	ddr->err_disable = 0x0000000D;
 	ddr->err_sbe = 0x00ff0000;
@@ -455,14 +455,14 @@ long int fixed_sdram (void)
 	udelay(500);
     #if defined (CONFIG_DDR_ECC)
 	/* Enable ECC checking */
-	ddr->sdram_cfg = (CFG_DDR_CONTROL | 0x20000000);
+	ddr->sdram_cfg = (CONFIG_SYS_DDR_CONTROL | 0x20000000);
     #else
-	ddr->sdram_cfg = CFG_DDR_CONTROL;
+	ddr->sdram_cfg = CONFIG_SYS_DDR_CONTROL;
     #endif
 	asm("sync; isync; msync");
 	udelay(500);
   #endif
-	return CFG_SDRAM_SIZE * 1024 * 1024;
+	return CONFIG_SYS_SDRAM_SIZE * 1024 * 1024;
 }
 #endif	/* !defined(CONFIG_SPD_EEPROM) */
 
diff --git a/board/freescale/mpc8560ads/tlb.c b/board/freescale/mpc8560ads/tlb.c
index 4fe2862f7..2ec3ccce9 100644
--- a/board/freescale/mpc8560ads/tlb.c
+++ b/board/freescale/mpc8560ads/tlb.c
@@ -28,16 +28,16 @@
 
 struct fsl_e_tlb_entry tlb_table[] = {
 	/* TLB 0 - for temp stack in cache */
-	SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR, CFG_INIT_RAM_ADDR,
+	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR, CONFIG_SYS_INIT_RAM_ADDR,
 		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
 		      0, 0, BOOKE_PAGESZ_4K, 0),
-	SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR + 4 * 1024 , CFG_INIT_RAM_ADDR + 4 * 1024,
+	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024 , CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024,
 		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
 		      0, 0, BOOKE_PAGESZ_4K, 0),
-	SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR + 8 * 1024 , CFG_INIT_RAM_ADDR + 8 * 1024,
+	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024 , CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024,
 		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
 		      0, 0, BOOKE_PAGESZ_4K, 0),
-	SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR + 12 * 1024 , CFG_INIT_RAM_ADDR + 12 * 1024,
+	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024 , CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024,
 		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
 		      0, 0, BOOKE_PAGESZ_4K, 0),
 
@@ -46,7 +46,7 @@ struct fsl_e_tlb_entry tlb_table[] = {
 	 * 0xff000000	16M	FLASH
 	 * Out of reset this entry is only 4K.
 	 */
-	SET_TLB_ENTRY(1, CFG_FLASH_BASE, CFG_FLASH_BASE,
+	SET_TLB_ENTRY(1, CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE,
 		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 		      0, 0, BOOKE_PAGESZ_16M, 1),
 
@@ -54,7 +54,7 @@ struct fsl_e_tlb_entry tlb_table[] = {
 	 * TLB 1:	256M	Non-cacheable, guarded
 	 * 0x80000000	256M	PCI1 MEM First half
 	 */
-	SET_TLB_ENTRY(1, CFG_PCI1_MEM_PHYS, CFG_PCI1_MEM_PHYS,
+	SET_TLB_ENTRY(1, CONFIG_SYS_PCI1_MEM_PHYS, CONFIG_SYS_PCI1_MEM_PHYS,
 		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 		      0, 1, BOOKE_PAGESZ_256M, 1),
 
@@ -62,7 +62,7 @@ struct fsl_e_tlb_entry tlb_table[] = {
 	 * TLB 2:	256M	Non-cacheable, guarded
 	 * 0x90000000	256M	PCI1 MEM Second half
 	 */
-	SET_TLB_ENTRY(1, CFG_PCI1_MEM_PHYS + 0x10000000, CFG_PCI1_MEM_PHYS + 0x10000000,
+	SET_TLB_ENTRY(1, CONFIG_SYS_PCI1_MEM_PHYS + 0x10000000, CONFIG_SYS_PCI1_MEM_PHYS + 0x10000000,
 		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 		      0, 2, BOOKE_PAGESZ_256M, 1),
 
@@ -70,7 +70,7 @@ struct fsl_e_tlb_entry tlb_table[] = {
 	 * TLB 3:	256M	Non-cacheable, guarded
 	 * 0xc0000000	256M	Rapid IO MEM First half
 	 */
-	SET_TLB_ENTRY(1, CFG_RIO_MEM_BASE, CFG_RIO_MEM_BASE,
+	SET_TLB_ENTRY(1, CONFIG_SYS_RIO_MEM_BASE, CONFIG_SYS_RIO_MEM_BASE,
 		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 		      0, 3, BOOKE_PAGESZ_256M, 1),
 
@@ -78,7 +78,7 @@ struct fsl_e_tlb_entry tlb_table[] = {
 	 * TLB 4:	256M	Non-cacheable, guarded
 	 * 0xd0000000	256M	Rapid IO MEM Second half
 	 */
-	SET_TLB_ENTRY(1, CFG_RIO_MEM_BASE + 0x10000000, CFG_RIO_MEM_BASE + 0x10000000,
+	SET_TLB_ENTRY(1, CONFIG_SYS_RIO_MEM_BASE + 0x10000000, CONFIG_SYS_RIO_MEM_BASE + 0x10000000,
 		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 		      0, 4, BOOKE_PAGESZ_256M, 1),
 
@@ -87,7 +87,7 @@ struct fsl_e_tlb_entry tlb_table[] = {
 	 * 0xe000_0000	1M	CCSRBAR
 	 * 0xe200_0000	16M	PCI1 IO
 	 */
-	SET_TLB_ENTRY(1, CFG_CCSRBAR, CFG_CCSRBAR_PHYS,
+	SET_TLB_ENTRY(1, CONFIG_SYS_CCSRBAR, CONFIG_SYS_CCSRBAR_PHYS,
 		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 		      0, 5, BOOKE_PAGESZ_64M, 1),
 
@@ -95,7 +95,7 @@ struct fsl_e_tlb_entry tlb_table[] = {
 	 * TLB 6:	64M	Cacheable, non-guarded
 	 * 0xf000_0000	64M	LBC SDRAM
 	 */
-	SET_TLB_ENTRY(1, CFG_LBC_SDRAM_BASE, CFG_LBC_SDRAM_BASE,
+	SET_TLB_ENTRY(1, CONFIG_SYS_LBC_SDRAM_BASE, CONFIG_SYS_LBC_SDRAM_BASE,
 		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
 		      0, 6, BOOKE_PAGESZ_64M, 1),
 
@@ -103,7 +103,7 @@ struct fsl_e_tlb_entry tlb_table[] = {
 	 * TLB 7:	16K	Non-cacheable, guarded
 	 * 0xf8000000	16K	BCSR registers
 	 */
-	SET_TLB_ENTRY(1, CFG_BCSR, CFG_BCSR,
+	SET_TLB_ENTRY(1, CONFIG_SYS_BCSR, CONFIG_SYS_BCSR,
 		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 		      0, 7, BOOKE_PAGESZ_16K, 1),
 
@@ -117,11 +117,11 @@ struct fsl_e_tlb_entry tlb_table[] = {
 	 * Likely it needs to be increased by two for these entries.
 	 */
 #error("Update the number of table entries in tlb1_entry")
-	SET_TLB_ENTRY(1, CFG_DDR_SDRAM_BASE, CFG_DDR_SDRAM_BASE,
+	SET_TLB_ENTRY(1, CONFIG_SYS_DDR_SDRAM_BASE, CONFIG_SYS_DDR_SDRAM_BASE,
 		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
 		      0, 8, BOOKE_PAGESZ_64M, 1),
 
-	SET_TLB_ENTRY(1, CFG_DDR_SDRAM_BASE + 0x4000000, CFG_DDR_SDRAM_BASE + 0x4000000,
+	SET_TLB_ENTRY(1, CONFIG_SYS_DDR_SDRAM_BASE + 0x4000000, CONFIG_SYS_DDR_SDRAM_BASE + 0x4000000,
 		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
 		      0, 9, BOOKE_PAGESZ_64M, 1),
 #endif
diff --git a/board/freescale/mpc8568mds/bcsr.c b/board/freescale/mpc8568mds/bcsr.c
index 791a50fc9..30676e1e1 100644
--- a/board/freescale/mpc8568mds/bcsr.c
+++ b/board/freescale/mpc8568mds/bcsr.c
@@ -27,9 +27,9 @@
 
 void enable_8568mds_duart()
 {
-	volatile uint* duart_mux	= (uint *)(CFG_CCSRBAR + 0xe0060);
-	volatile uint* devices		= (uint *)(CFG_CCSRBAR + 0xe0070);
-	volatile u8 *bcsr		= (u8 *)(CFG_BCSR);
+	volatile uint* duart_mux	= (uint *)(CONFIG_SYS_CCSRBAR + 0xe0060);
+	volatile uint* devices		= (uint *)(CONFIG_SYS_CCSRBAR + 0xe0070);
+	volatile u8 *bcsr		= (u8 *)(CONFIG_SYS_BCSR);
 
 	*duart_mux = 0x80000000;	/* Set the mux to Duart on PMUXCR */
 	*devices  = 0;			/* Enable all peripheral devices */
@@ -38,21 +38,21 @@ void enable_8568mds_duart()
 
 void enable_8568mds_flash_write()
 {
-	volatile u8 *bcsr = (u8 *)(CFG_BCSR);
+	volatile u8 *bcsr = (u8 *)(CONFIG_SYS_BCSR);
 
 	bcsr[9] |= 0x01;
 }
 
 void disable_8568mds_flash_write()
 {
-	volatile u8 *bcsr = (u8 *)(CFG_BCSR);
+	volatile u8 *bcsr = (u8 *)(CONFIG_SYS_BCSR);
 
 	bcsr[9] &= ~(0x01);
 }
 
 void enable_8568mds_qe_mdio()
 {
-	u8 *bcsr = (u8 *)(CFG_BCSR);
+	u8 *bcsr = (u8 *)(CONFIG_SYS_BCSR);
 
 	bcsr[7] |= 0x01;
 }
@@ -60,7 +60,7 @@ void enable_8568mds_qe_mdio()
 #if defined(CONFIG_UEC_ETH1) || defined(CONFIG_UEC_ETH2)
 void reset_8568mds_uccs(void)
 {
-	volatile u8 *bcsr = (u8 *)(CFG_BCSR);
+	volatile u8 *bcsr = (u8 *)(CONFIG_SYS_BCSR);
 
 	/* Turn off UCC1 & UCC2 */
 	out_8(&bcsr[8], in_8(&bcsr[8]) & ~BCSR_UCC1_GETH_EN);
diff --git a/board/freescale/mpc8568mds/ddr.c b/board/freescale/mpc8568mds/ddr.c
index 1b8ecec5a..482fd919f 100644
--- a/board/freescale/mpc8568mds/ddr.c
+++ b/board/freescale/mpc8568mds/ddr.c
@@ -10,6 +10,7 @@
 #include <i2c.h>
 
 #include <asm/fsl_ddr_sdram.h>
+#include <asm/fsl_ddr_dimm_params.h>
 
 static void
 get_spd(ddr2_spd_eeprom_t *spd, unsigned char i2c_address)
@@ -38,7 +39,9 @@ void fsl_ddr_get_spd(ddr2_spd_eeprom_t *ctrl_dimms_spd,
 	}
 }
 
-void fsl_ddr_board_options(memctl_options_t *popts, unsigned int ctrl_num)
+void fsl_ddr_board_options(memctl_options_t *popts,
+				dimm_params_t *pdimm,
+				unsigned int ctrl_num)
 {
 	/*
 	 * Factors to consider for clock adjust:
diff --git a/board/freescale/mpc8568mds/law.c b/board/freescale/mpc8568mds/law.c
index 3bc24c5c9..da7b6dcb7 100644
--- a/board/freescale/mpc8568mds/law.c
+++ b/board/freescale/mpc8568mds/law.c
@@ -50,13 +50,13 @@
  */
 
 struct law_entry law_table[] = {
-	SET_LAW(CFG_PCI1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI),
-	SET_LAW(CFG_PCIE1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCIE_1),
-	SET_LAW(CFG_PCI1_IO_PHYS, LAW_SIZE_8M, LAW_TRGT_IF_PCI),
-	SET_LAW(CFG_PCIE1_IO_PHYS, LAW_SIZE_8M, LAW_TRGT_IF_PCIE_1),
-	SET_LAW(CFG_SRIO_MEM_BASE, LAW_SIZE_512M, LAW_TRGT_IF_RIO),
+	SET_LAW(CONFIG_SYS_PCI1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI),
+	SET_LAW(CONFIG_SYS_PCIE1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCIE_1),
+	SET_LAW(CONFIG_SYS_PCI1_IO_PHYS, LAW_SIZE_8M, LAW_TRGT_IF_PCI),
+	SET_LAW(CONFIG_SYS_PCIE1_IO_PHYS, LAW_SIZE_8M, LAW_TRGT_IF_PCIE_1),
+	SET_LAW(CONFIG_SYS_SRIO_MEM_BASE, LAW_SIZE_512M, LAW_TRGT_IF_RIO),
 	/* LBC window - maps 256M.  That's SDRAM, BCSR, PIBs, and Flash */
-	SET_LAW(CFG_LBC_SDRAM_BASE, LAW_SIZE_256M, LAW_TRGT_IF_LBC),
+	SET_LAW(CONFIG_SYS_LBC_SDRAM_BASE, LAW_SIZE_256M, LAW_TRGT_IF_LBC),
 };
 
 int num_law_entries = ARRAY_SIZE(law_table);
diff --git a/board/freescale/mpc8568mds/mpc8568mds.c b/board/freescale/mpc8568mds/mpc8568mds.c
index f9e35cc7e..bc93be80f 100644
--- a/board/freescale/mpc8568mds/mpc8568mds.c
+++ b/board/freescale/mpc8568mds/mpc8568mds.c
@@ -99,11 +99,6 @@ const qe_iop_conf_t qe_iop_conf_tab[] = {
 	{0,  0, 0, 0, QE_IOP_TAB_END}, /* END of table */
 };
 
-
-#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
-extern void ddr_enable_ecc(unsigned int dram_size);
-#endif
-
 void local_bus_init(void);
 void sdram_init(void);
 
@@ -123,10 +118,10 @@ int board_early_init_f (void)
 	enable_8568mds_qe_mdio();
 #endif
 
-#ifdef CFG_I2C2_OFFSET
+#ifdef CONFIG_SYS_I2C2_OFFSET
 	/* Enable I2C2_SCL and I2C2_SDA */
 	volatile struct par_io *port_c;
-	port_c = (struct par_io*)(CFG_IMMR + 0xe0140);
+	port_c = (struct par_io*)(CONFIG_SYS_IMMR + 0xe0140);
 	port_c->cpdir2 |= 0x0f000000;
 	port_c->cppar2 &= ~0x0f000000;
 	port_c->cppar2 |= 0x0a000000;
@@ -158,7 +153,7 @@ initdram(int board_type)
 		 *    Override DLL = 1, Course Adj = 1, Tap Select = 0
 		 */
 
-		volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR);
+		volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
 
 		gur->ddrdllcr = 0x81000000;
 		asm("sync;isync;msync");
@@ -170,13 +165,6 @@ initdram(int board_type)
 	dram_size = setup_ddr_tlbs(dram_size / 0x100000);
 	dram_size *= 0x100000;
 
-#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
-	/*
-	 * Initialize and enable DDR ECC.
-	 */
-	ddr_enable_ecc(dram_size);
-#endif
-
 	/*
 	 * SDRAM Initialization
 	 */
@@ -192,8 +180,8 @@ initdram(int board_type)
 void
 local_bus_init(void)
 {
-	volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR);
-	volatile ccsr_lbc_t *lbc = (void *)(CFG_MPC85xx_LBC_ADDR);
+	volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+	volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR);
 
 	uint clkdiv;
 	uint lbc_hz;
@@ -223,44 +211,44 @@ local_bus_init(void)
 void
 sdram_init(void)
 {
-#if defined(CFG_OR2_PRELIM) && defined(CFG_BR2_PRELIM)
+#if defined(CONFIG_SYS_OR2_PRELIM) && defined(CONFIG_SYS_BR2_PRELIM)
 
 	uint idx;
-	volatile ccsr_lbc_t *lbc = (void *)(CFG_MPC85xx_LBC_ADDR);
-	uint *sdram_addr = (uint *)CFG_LBC_SDRAM_BASE;
+	volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR);
+	uint *sdram_addr = (uint *)CONFIG_SYS_LBC_SDRAM_BASE;
 	uint lsdmr_common;
 
 	puts("    SDRAM: ");
 
-	print_size (CFG_LBC_SDRAM_SIZE * 1024 * 1024, "\n");
+	print_size (CONFIG_SYS_LBC_SDRAM_SIZE * 1024 * 1024, "\n");
 
 	/*
 	 * Setup SDRAM Base and Option Registers
 	 */
-	lbc->or2 = CFG_OR2_PRELIM;
+	lbc->or2 = CONFIG_SYS_OR2_PRELIM;
 	asm("msync");
 
-	lbc->br2 = CFG_BR2_PRELIM;
+	lbc->br2 = CONFIG_SYS_BR2_PRELIM;
 	asm("msync");
 
-	lbc->lbcr = CFG_LBC_LBCR;
+	lbc->lbcr = CONFIG_SYS_LBC_LBCR;
 	asm("msync");
 
 
-	lbc->lsrt = CFG_LBC_LSRT;
-	lbc->mrtpr = CFG_LBC_MRTPR;
+	lbc->lsrt = CONFIG_SYS_LBC_LSRT;
+	lbc->mrtpr = CONFIG_SYS_LBC_MRTPR;
 	asm("msync");
 
 	/*
 	 * MPC8568 uses "new" 15-16 style addressing.
 	 */
-	lsdmr_common = CFG_LBC_LSDMR_COMMON;
-	lsdmr_common |= CFG_LBC_LSDMR_BSMA1516;
+	lsdmr_common = CONFIG_SYS_LBC_LSDMR_COMMON;
+	lsdmr_common |= CONFIG_SYS_LBC_LSDMR_BSMA1516;
 
 	/*
 	 * Issue PRECHARGE ALL command.
 	 */
-	lbc->lsdmr = lsdmr_common | CFG_LBC_LSDMR_OP_PCHALL;
+	lbc->lsdmr = lsdmr_common | CONFIG_SYS_LBC_LSDMR_OP_PCHALL;
 	asm("sync;msync");
 	*sdram_addr = 0xff;
 	ppcDcbf((unsigned long) sdram_addr);
@@ -270,7 +258,7 @@ sdram_init(void)
 	 * Issue 8 AUTO REFRESH commands.
 	 */
 	for (idx = 0; idx < 8; idx++) {
-		lbc->lsdmr = lsdmr_common | CFG_LBC_LSDMR_OP_ARFRSH;
+		lbc->lsdmr = lsdmr_common | CONFIG_SYS_LBC_LSDMR_OP_ARFRSH;
 		asm("sync;msync");
 		*sdram_addr = 0xff;
 		ppcDcbf((unsigned long) sdram_addr);
@@ -280,7 +268,7 @@ sdram_init(void)
 	/*
 	 * Issue 8 MODE-set command.
 	 */
-	lbc->lsdmr = lsdmr_common | CFG_LBC_LSDMR_OP_MRW;
+	lbc->lsdmr = lsdmr_common | CONFIG_SYS_LBC_LSDMR_OP_MRW;
 	asm("sync;msync");
 	*sdram_addr = 0xff;
 	ppcDcbf((unsigned long) sdram_addr);
@@ -289,7 +277,7 @@ sdram_init(void)
 	/*
 	 * Issue NORMAL OP command.
 	 */
-	lbc->lsdmr = lsdmr_common | CFG_LBC_LSDMR_OP_NORMAL;
+	lbc->lsdmr = lsdmr_common | CONFIG_SYS_LBC_LSDMR_OP_NORMAL;
 	asm("sync;msync");
 	*sdram_addr = 0xff;
 	ppcDcbf((unsigned long) sdram_addr);
@@ -323,6 +311,9 @@ static struct pci_controller pci1_hose = {
 static struct pci_controller pcie1_hose;
 #endif  /* CONFIG_PCIE1 */
 
+extern int fsl_pci_setup_inbound_windows(struct pci_region *r);
+extern void fsl_pci_init(struct pci_controller *hose);
+
 int first_free_busno = 0;
 
 /*
@@ -371,7 +362,7 @@ pib_init(void)
 void
 pci_init_board(void)
 {
-	volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR);
+	volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
 	uint io_sel = (gur->pordevsr & MPC85xx_PORDEVSR_IO_SEL) >> 19;
 	uint host_agent = (gur->porbmsr & MPC85xx_PORBMSR_HA) >> 16;
 
@@ -379,9 +370,9 @@ pci_init_board(void)
 {
 	pib_init();
 
-	volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CFG_PCI1_ADDR;
-	extern void fsl_pci_init(struct pci_controller *hose);
+	volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCI1_ADDR;
 	struct pci_controller *hose = &pci1_hose;
+	struct pci_region *r = hose->regions;
 
 	uint pci_32 = 1;      /* PORDEVSR[15] */
 	uint pci_arb = gur->pordevsr & MPC85xx_PORDEVSR_PCI1_ARB;       /* PORDEVSR[14] */
@@ -402,27 +393,23 @@ pci_init_board(void)
 			);
 
 		/* inbound */
-		pci_set_region(hose->regions + 0,
-				CFG_PCI_MEMORY_BUS,
-				CFG_PCI_MEMORY_PHYS,
-				CFG_PCI_MEMORY_SIZE,
-				PCI_REGION_MEM | PCI_REGION_MEMORY);
+		r += fsl_pci_setup_inbound_windows(r);
 
 		/* outbound memory */
-		pci_set_region(hose->regions + 1,
-				CFG_PCI1_MEM_BASE,
-				CFG_PCI1_MEM_PHYS,
-				CFG_PCI1_MEM_SIZE,
+		pci_set_region(r++,
+				CONFIG_SYS_PCI1_MEM_BASE,
+				CONFIG_SYS_PCI1_MEM_PHYS,
+				CONFIG_SYS_PCI1_MEM_SIZE,
 				PCI_REGION_MEM);
 
 		/* outbound io */
-		pci_set_region(hose->regions + 2,
-				CFG_PCI1_IO_BASE,
-				CFG_PCI1_IO_PHYS,
-				CFG_PCI1_IO_SIZE,
+		pci_set_region(r++,
+				CONFIG_SYS_PCI1_IO_BASE,
+				CONFIG_SYS_PCI1_IO_PHYS,
+				CONFIG_SYS_PCI1_IO_SIZE,
 				PCI_REGION_IO);
 
-		hose->region_count = 3;
+		hose->region_count = r - hose->regions;
 
 		hose->first_busno = first_free_busno;
 		pci_setup_indirect(hose, (int) &pci->cfg_addr, (int) &pci->cfg_data);
@@ -440,10 +427,10 @@ pci_init_board(void)
 
 #ifdef CONFIG_PCIE1
 {
-	volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CFG_PCIE1_ADDR;
-	extern void fsl_pci_init(struct pci_controller *hose);
+	volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCIE1_ADDR;
 	struct pci_controller *hose = &pcie1_hose;
 	int pcie_ep =  (host_agent == 0) || (host_agent == 2 ) || (host_agent == 3);
+	struct pci_region *r = hose->regions;
 
 	int pcie_configured  = io_sel >= 1;
 
@@ -459,27 +446,23 @@ pci_init_board(void)
 		printf ("\n");
 
 		/* inbound */
-		pci_set_region(hose->regions + 0,
-				CFG_PCI_MEMORY_BUS,
-				CFG_PCI_MEMORY_PHYS,
-				CFG_PCI_MEMORY_SIZE,
-				PCI_REGION_MEM | PCI_REGION_MEMORY);
+		r += fsl_pci_setup_inbound_windows(r);
 
 		/* outbound memory */
-		pci_set_region(hose->regions + 1,
-				CFG_PCIE1_MEM_BASE,
-				CFG_PCIE1_MEM_PHYS,
-				CFG_PCIE1_MEM_SIZE,
+		pci_set_region(r++,
+				CONFIG_SYS_PCIE1_MEM_BASE,
+				CONFIG_SYS_PCIE1_MEM_PHYS,
+				CONFIG_SYS_PCIE1_MEM_SIZE,
 				PCI_REGION_MEM);
 
 		/* outbound io */
-		pci_set_region(hose->regions + 2,
-				CFG_PCIE1_IO_BASE,
-				CFG_PCIE1_IO_PHYS,
-				CFG_PCIE1_IO_SIZE,
+		pci_set_region(r++,
+				CONFIG_SYS_PCIE1_IO_BASE,
+				CONFIG_SYS_PCIE1_IO_PHYS,
+				CONFIG_SYS_PCIE1_IO_SIZE,
 				PCI_REGION_IO);
 
-		hose->region_count = 3;
+		hose->region_count = r - hose->regions;
 
 		hose->first_busno=first_free_busno;
 		pci_setup_indirect(hose, (int) &pci->cfg_addr, (int) &pci->cfg_data);
@@ -500,31 +483,18 @@ pci_init_board(void)
 #endif /* CONFIG_PCI */
 
 #if defined(CONFIG_OF_BOARD_SETUP)
-void
-ft_board_setup(void *blob, bd_t *bd)
-{
-	int node, tmp[2];
-	const char *path;
+extern void ft_fsl_pci_setup(void *blob, const char *pci_alias,
+			struct pci_controller *hose);
 
+void ft_board_setup(void *blob, bd_t *bd)
+{
 	ft_cpu_setup(blob, bd);
 
-	node = fdt_path_offset(blob, "/aliases");
-	tmp[0] = 0;
-	if (node >= 0) {
 #ifdef CONFIG_PCI1
-		path = fdt_getprop(blob, node, "pci0", NULL);
-		if (path) {
-			tmp[1] = pci1_hose.last_busno - pci1_hose.first_busno;
-			do_fixup_by_path(blob, path, "bus-range", &tmp, 8, 1);
-		}
+	ft_fsl_pci_setup(blob, "pci0", &pci1_hose);
 #endif
 #ifdef CONFIG_PCIE1
-		path = fdt_getprop(blob, node, "pci1", NULL);
-		if (path) {
-			tmp[1] = pcie1_hose.last_busno - pcie1_hose.first_busno;
-			do_fixup_by_path(blob, path, "bus-range", &tmp, 8, 1);
-		}
+	ft_fsl_pci_setup(blob, "pci1", &pcie1_hose);
 #endif
-	}
 }
 #endif
diff --git a/board/freescale/mpc8568mds/tlb.c b/board/freescale/mpc8568mds/tlb.c
index 75651765f..107755273 100644
--- a/board/freescale/mpc8568mds/tlb.c
+++ b/board/freescale/mpc8568mds/tlb.c
@@ -28,16 +28,16 @@
 
 struct fsl_e_tlb_entry tlb_table[] = {
 	/* TLB 0 - for temp stack in cache */
-	SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR, CFG_INIT_RAM_ADDR,
+	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR, CONFIG_SYS_INIT_RAM_ADDR,
 		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
 		      0, 0, BOOKE_PAGESZ_4K, 0),
-	SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR + 4 * 1024 , CFG_INIT_RAM_ADDR + 4 * 1024,
+	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024 , CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024,
 		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
 		      0, 0, BOOKE_PAGESZ_4K, 0),
-	SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR + 8 * 1024 , CFG_INIT_RAM_ADDR + 8 * 1024,
+	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024 , CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024,
 		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
 		      0, 0, BOOKE_PAGESZ_4K, 0),
-	SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR + 12 * 1024 , CFG_INIT_RAM_ADDR + 12 * 1024,
+	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024 , CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024,
 		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
 		      0, 0, BOOKE_PAGESZ_4K, 0),
 
@@ -47,7 +47,7 @@ struct fsl_e_tlb_entry tlb_table[] = {
 	 * 0xff000000	16M	FLASH (upper half)
 	 * Out of reset this entry is only 4K.
 	 */
-	SET_TLB_ENTRY(1, CFG_FLASH_BASE + 0x1000000, CFG_FLASH_BASE + 0x1000000,
+	SET_TLB_ENTRY(1, CONFIG_SYS_FLASH_BASE + 0x1000000, CONFIG_SYS_FLASH_BASE + 0x1000000,
 		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 		      0, 0, BOOKE_PAGESZ_16M, 1),
 
@@ -55,7 +55,7 @@ struct fsl_e_tlb_entry tlb_table[] = {
 	 * TLBe 1:	16M	Non-cacheable, guarded
 	 * 0xfe000000	16M	FLASH (lower half)
 	 */
-	SET_TLB_ENTRY(1, CFG_FLASH_BASE, CFG_FLASH_BASE,
+	SET_TLB_ENTRY(1, CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE,
 		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 		      0, 1, BOOKE_PAGESZ_16M, 1),
 
@@ -64,7 +64,7 @@ struct fsl_e_tlb_entry tlb_table[] = {
 	 * 0x80000000	512M	PCI1 MEM
 	 * 0xa0000000	512M	PCIe MEM
 	 */
-	SET_TLB_ENTRY(1, CFG_PCI1_MEM_PHYS, CFG_PCI1_MEM_PHYS,
+	SET_TLB_ENTRY(1, CONFIG_SYS_PCI1_MEM_PHYS, CONFIG_SYS_PCI1_MEM_PHYS,
 		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 		      0, 2, BOOKE_PAGESZ_1G, 1),
 
@@ -74,7 +74,7 @@ struct fsl_e_tlb_entry tlb_table[] = {
 	 * 0xe200_0000	8M	PCI1 IO
 	 * 0xe280_0000	8M	PCIe IO
 	 */
-	SET_TLB_ENTRY(1, CFG_CCSRBAR, CFG_CCSRBAR_PHYS,
+	SET_TLB_ENTRY(1, CONFIG_SYS_CCSRBAR, CONFIG_SYS_CCSRBAR_PHYS,
 		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 		      0, 3, BOOKE_PAGESZ_64M, 1),
 
@@ -82,7 +82,7 @@ struct fsl_e_tlb_entry tlb_table[] = {
 	 * TLBe 4:	64M	Cacheable, non-guarded
 	 * 0xf000_0000	64M	LBC SDRAM
 	 */
-	SET_TLB_ENTRY(1, CFG_LBC_SDRAM_BASE, CFG_LBC_SDRAM_BASE,
+	SET_TLB_ENTRY(1, CONFIG_SYS_LBC_SDRAM_BASE, CONFIG_SYS_LBC_SDRAM_BASE,
 		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
 		      0, 4, BOOKE_PAGESZ_64M, 1),
 
@@ -92,7 +92,7 @@ struct fsl_e_tlb_entry tlb_table[] = {
 	 * 0xf8008000	32K PIB (CS4)
 	 * 0xf8010000	32K PIB (CS5)
 	 */
-	SET_TLB_ENTRY(1, CFG_BCSR_BASE, CFG_BCSR_BASE,
+	SET_TLB_ENTRY(1, CONFIG_SYS_BCSR_BASE, CONFIG_SYS_BCSR_BASE,
 		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 		      0, 5, BOOKE_PAGESZ_256K, 1),
 };
diff --git a/board/freescale/mpc8572ds/ddr.c b/board/freescale/mpc8572ds/ddr.c
index 5f8c55504..d66ede2d5 100644
--- a/board/freescale/mpc8572ds/ddr.c
+++ b/board/freescale/mpc8572ds/ddr.c
@@ -10,6 +10,7 @@
 #include <i2c.h>
 
 #include <asm/fsl_ddr_sdram.h>
+#include <asm/fsl_ddr_dimm_params.h>
 
 static void get_spd(ddr2_spd_eeprom_t *spd, unsigned char i2c_address)
 {
@@ -38,40 +39,108 @@ void fsl_ddr_get_spd(ddr2_spd_eeprom_t *ctrl_dimms_spd,
 	}
 }
 
-void fsl_ddr_board_options(memctl_options_t *popts, unsigned int ctrl_num)
+typedef struct {
+	u32 datarate_mhz_low;
+	u32 datarate_mhz_high;
+	u32 n_ranks;
+	u32 clk_adjust;
+	u32 cpo;
+	u32 write_data_delay;
+	u32 force_2T;
+} board_specific_parameters_t;
+
+/* ranges for parameters:
+ *  wr_data_delay = 0-6
+ *  clk adjust = 0-8
+ *  cpo 2-0x1E (30)
+ */
+
+
+/* XXX: these values need to be checked for all interleaving modes.  */
+/* XXX: No reliable dual-rank 800 MHz setting has been found.  It may
+ *      seem reliable, but errors will appear when memory intensive
+ *      program is run. */
+/* XXX: Single rank at 800 MHz is OK.  */
+const board_specific_parameters_t board_specific_parameters[][20] = {
+	{
+	/* 	memory controller 0 			*/
+	/*	  lo|  hi|  num|  clk| cpo|wrdata|2T	*/
+	/*	 mhz| mhz|ranks|adjst|    | delay|	*/
+		{  0, 333,    2,    6,   7,    3,  0},
+		{334, 400,    2,    6,   9,    3,  0},
+		{401, 549,    2,    6,  11,    3,  0},
+		{550, 680,    2,    1,  10,    5,  0},
+		{681, 850,    2,    1,  12,    5,  1},
+		{  0, 333,    1,    6,   7,    3,  0},
+		{334, 400,    1,    6,   9,    3,  0},
+		{401, 549,    1,    6,  11,    3,  0},
+		{550, 680,    1,    1,  10,    5,  0},
+		{681, 850,    1,    1,  12,    5,  0}
+	},
+
+	{
+	/*	memory controller 1			*/
+	/*	  lo|  hi|  num|  clk| cpo|wrdata|2T	*/
+	/*	 mhz| mhz|ranks|adjst|    | delay|	*/
+		{  0, 333,    2,     6,  7,    3,  0},
+		{334, 400,    2,     6,  9,    3,  0},
+		{401, 549,    2,     6, 11,    3,  0},
+		{550, 680,    2,     1, 11,    6,  0},
+		{681, 850,    2,     1, 13,    6,  1},
+		{  0, 333,    1,     6,  7,    3,  0},
+		{334, 400,    1,     6,  9,    3,  0},
+		{401, 549,    1,     6, 11,    3,  0},
+		{550, 680,    1,     1, 11,    6,  0},
+		{681, 850,    1,     1, 13,    6,  0}
+	}
+};
+
+void fsl_ddr_board_options(memctl_options_t *popts,
+				dimm_params_t *pdimm,
+				unsigned int ctrl_num)
 {
-	/*
-	 * Factors to consider for clock adjust:
-	 *	- number of chips on bus
-	 *	- position of slot
-	 *	- DDR1 vs. DDR2?
-	 *	- ???
-	 *
-	 * This needs to be determined on a board-by-board basis.
-	 *	0110	3/4 cycle late
-	 *	0111	7/8 cycle late
-	 */
-	popts->clk_adjust = 7;
+	const board_specific_parameters_t *pbsp =
+				&(board_specific_parameters[ctrl_num][0]);
+	u32 num_params = sizeof(board_specific_parameters[ctrl_num]) /
+				sizeof(board_specific_parameters[0][0]);
+	u32 i;
+	ulong ddr_freq;
 
-	/*
-	 * Factors to consider for CPO:
-	 *	- frequency
-	 *	- ddr1 vs. ddr2
+	/* set odt_rd_cfg and odt_wr_cfg. If the there is only one dimm in
+	 * that controller, set odt_wr_cfg to 4 for CS0, and 0 to CS1. If
+	 * there are two dimms in the controller, set odt_rd_cfg to 3 and
+	 * odt_wr_cfg to 3 for the even CS, 0 for the odd CS.
 	 */
-	popts->cpo_override = 10;
+	for (i = 0; i < CONFIG_CHIP_SELECTS_PER_CTRL; i++) {
+		if (i&1) {	/* odd CS */
+			popts->cs_local_opts[i].odt_rd_cfg = 0;
+			popts->cs_local_opts[i].odt_wr_cfg = 0;
+		} else {	/* even CS */
+			if (CONFIG_DIMM_SLOTS_PER_CTLR == 1) {
+				popts->cs_local_opts[i].odt_rd_cfg = 0;
+				popts->cs_local_opts[i].odt_wr_cfg = 4;
+			} else if (CONFIG_DIMM_SLOTS_PER_CTLR == 2) {
+			popts->cs_local_opts[i].odt_rd_cfg = 3;
+			popts->cs_local_opts[i].odt_wr_cfg = 3;
+			}
+		}
+	}
 
-	/*
-	 * Factors to consider for write data delay:
-	 *	- number of DIMMs
-	 *
-	 * 1 = 1/4 clock delay
-	 * 2 = 1/2 clock delay
-	 * 3 = 3/4 clock delay
-	 * 4 = 1   clock delay
-	 * 5 = 5/4 clock delay
-	 * 6 = 3/2 clock delay
+	/* Get clk_adjust, cpo, write_data_delay,2T, according to the board ddr
+	 * freqency and n_banks specified in board_specific_parameters table.
 	 */
-	popts->write_data_delay = 5;
+	ddr_freq = get_ddr_freq(0) / 1000000;
+	for (i = 0; i < num_params; i++) {
+		if (ddr_freq >= pbsp->datarate_mhz_low &&
+		    ddr_freq <= pbsp->datarate_mhz_high &&
+		    pdimm->n_ranks == pbsp->n_ranks) {
+			popts->clk_adjust = pbsp->clk_adjust;
+			popts->cpo_override = pbsp->cpo;
+			popts->write_data_delay = pbsp->write_data_delay;
+			popts->twoT_en = pbsp->force_2T;
+		}
+		pbsp++;
+	}
 
 	/*
 	 * Factors to consider for half-strength driver enable:
diff --git a/board/freescale/mpc8572ds/law.c b/board/freescale/mpc8572ds/law.c
index d69b59345..83eb6811c 100644
--- a/board/freescale/mpc8572ds/law.c
+++ b/board/freescale/mpc8572ds/law.c
@@ -28,14 +28,15 @@
 #include <asm/mmu.h>
 
 struct law_entry law_table[] = {
-	SET_LAW(CFG_FLASH_BASE, LAW_SIZE_256M, LAW_TRGT_IF_LBC),
-	SET_LAW(CFG_PCIE1_MEM_PHYS, LAWAR_SIZE_512M, LAW_TRGT_IF_PCIE_1),
-	SET_LAW(CFG_PCIE1_IO_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_PCIE_1),
-	SET_LAW(CFG_PCIE2_MEM_PHYS, LAWAR_SIZE_512M, LAW_TRGT_IF_PCIE_2),
-	SET_LAW(CFG_PCIE2_IO_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_PCIE_2),
-	SET_LAW(CFG_PCIE3_MEM_PHYS, LAWAR_SIZE_512M, LAW_TRGT_IF_PCIE_3),
-	SET_LAW(CFG_PCIE3_IO_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_PCIE_3),
+	SET_LAW(CONFIG_SYS_FLASH_BASE, LAW_SIZE_256M, LAW_TRGT_IF_LBC),
+	SET_LAW(CONFIG_SYS_PCIE1_MEM_PHYS, LAWAR_SIZE_512M, LAW_TRGT_IF_PCIE_1),
+	SET_LAW(CONFIG_SYS_PCIE1_IO_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_PCIE_1),
+	SET_LAW(CONFIG_SYS_PCIE2_MEM_PHYS, LAWAR_SIZE_512M, LAW_TRGT_IF_PCIE_2),
+	SET_LAW(CONFIG_SYS_PCIE2_IO_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_PCIE_2),
+	SET_LAW(CONFIG_SYS_PCIE3_MEM_PHYS, LAWAR_SIZE_512M, LAW_TRGT_IF_PCIE_3),
+	SET_LAW(CONFIG_SYS_PCIE3_IO_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_PCIE_3),
 	SET_LAW(PIXIS_BASE, LAW_SIZE_4K, LAW_TRGT_IF_LBC),
+	SET_LAW(CONFIG_SYS_NAND_BASE_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_LBC),
 };
 
 int num_law_entries = ARRAY_SIZE(law_table);
diff --git a/board/freescale/mpc8572ds/mpc8572ds.c b/board/freescale/mpc8572ds/mpc8572ds.c
index 70b548bc3..a14db5ad2 100644
--- a/board/freescale/mpc8572ds/mpc8572ds.c
+++ b/board/freescale/mpc8572ds/mpc8572ds.c
@@ -25,6 +25,7 @@
 #include <pci.h>
 #include <asm/processor.h>
 #include <asm/mmu.h>
+#include <asm/cache.h>
 #include <asm/immap_85xx.h>
 #include <asm/immap_fsl_pci.h>
 #include <asm/fsl_ddr_sdram.h>
@@ -32,12 +33,10 @@
 #include <miiphy.h>
 #include <libfdt.h>
 #include <fdt_support.h>
+#include <tsec.h>
 
 #include "../common/pixis.h"
-
-#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
-extern void ddr_enable_ecc(unsigned int dram_size);
-#endif
+#include "../common/sgmii_riser.h"
 
 long int fixed_sdram(void);
 
@@ -58,20 +57,12 @@ phys_size_t initdram(int board_type)
 
 #ifdef CONFIG_SPD_EEPROM
 	dram_size = fsl_ddr_sdram();
-
-	dram_size = setup_ddr_tlbs(dram_size / 0x100000);
-
-	dram_size *= 0x100000;
 #else
 	dram_size = fixed_sdram();
 #endif
+	dram_size = setup_ddr_tlbs(dram_size / 0x100000);
+	dram_size *= 0x100000;
 
-#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
-	/*
-	 * Initialize and enable DDR ECC.
-	 */
-	ddr_enable_ecc(dram_size);
-#endif
 	puts("    DDR: ");
 	return dram_size;
 }
@@ -83,34 +74,34 @@ phys_size_t initdram(int board_type)
 
 phys_size_t fixed_sdram (void)
 {
-	volatile immap_t *immap = (immap_t *)CFG_IMMR;
+	volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR;
 	volatile ccsr_ddr_t *ddr= &immap->im_ddr;
 	uint d_init;
 
-	ddr->cs0_bnds = CFG_DDR_CS0_BNDS;
-	ddr->cs0_config = CFG_DDR_CS0_CONFIG;
+	ddr->cs0_bnds = CONFIG_SYS_DDR_CS0_BNDS;
+	ddr->cs0_config = CONFIG_SYS_DDR_CS0_CONFIG;
 
-	ddr->timing_cfg_3 = CFG_DDR_TIMING_3;
-	ddr->timing_cfg_0 = CFG_DDR_TIMING_0;
-	ddr->timing_cfg_1 = CFG_DDR_TIMING_1;
-	ddr->timing_cfg_2 = CFG_DDR_TIMING_2;
-	ddr->sdram_mode = CFG_DDR_MODE_1;
-	ddr->sdram_mode_2 = CFG_DDR_MODE_2;
-	ddr->sdram_interval = CFG_DDR_INTERVAL;
-	ddr->sdram_data_init = CFG_DDR_DATA_INIT;
-	ddr->sdram_clk_cntl = CFG_DDR_CLK_CTRL;
-	ddr->sdram_cfg_2 = CFG_DDR_CONTROL2;
+	ddr->timing_cfg_3 = CONFIG_SYS_DDR_TIMING_3;
+	ddr->timing_cfg_0 = CONFIG_SYS_DDR_TIMING_0;
+	ddr->timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1;
+	ddr->timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2;
+	ddr->sdram_mode = CONFIG_SYS_DDR_MODE_1;
+	ddr->sdram_mode_2 = CONFIG_SYS_DDR_MODE_2;
+	ddr->sdram_interval = CONFIG_SYS_DDR_INTERVAL;
+	ddr->sdram_data_init = CONFIG_SYS_DDR_DATA_INIT;
+	ddr->sdram_clk_cntl = CONFIG_SYS_DDR_CLK_CTRL;
+	ddr->sdram_cfg_2 = CONFIG_SYS_DDR_CONTROL2;
 
 #if defined (CONFIG_DDR_ECC)
-	ddr->err_int_en = CFG_DDR_ERR_INT_EN;
-	ddr->err_disable = CFG_DDR_ERR_DIS;
-	ddr->err_sbe = CFG_DDR_SBE;
+	ddr->err_int_en = CONFIG_SYS_DDR_ERR_INT_EN;
+	ddr->err_disable = CONFIG_SYS_DDR_ERR_DIS;
+	ddr->err_sbe = CONFIG_SYS_DDR_SBE;
 #endif
 	asm("sync;isync");
 
 	udelay(500);
 
-	ddr->sdram_cfg = CFG_DDR_CONTROL;
+	ddr->sdram_cfg = CONFIG_SYS_DDR_CONTROL;
 
 #if defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
 	d_init = 1;
@@ -144,11 +135,14 @@ static struct pci_controller pcie2_hose;
 static struct pci_controller pcie3_hose;
 #endif
 
+extern int fsl_pci_setup_inbound_windows(struct pci_region *r);
+extern void fsl_pci_init(struct pci_controller *hose);
+
 int first_free_busno=0;
 #ifdef CONFIG_PCI
 void pci_init_board(void)
 {
-	volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR);
+	volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
 	uint devdisr = gur->devdisr;
 	uint io_sel = (gur->pordevsr & MPC85xx_PORDEVSR_IO_SEL) >> 19;
 	uint host_agent = (gur->porbmsr & MPC85xx_PORBMSR_HA) >> 16;
@@ -168,12 +162,12 @@ void pci_init_board(void)
 
 #ifdef CONFIG_PCIE3
 	{
-		volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CFG_PCIE3_ADDR;
-		extern void fsl_pci_init(struct pci_controller *hose);
+		volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCIE3_ADDR;
 		struct pci_controller *hose = &pcie3_hose;
 		int pcie_ep = (host_agent == 0) || (host_agent == 3) ||
 			(host_agent == 5) || (host_agent == 6);
 		int pcie_configured  = io_sel >= 1;
+		struct pci_region *r = hose->regions;
 		u32 temp32;
 
 		if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE)){
@@ -187,27 +181,23 @@ void pci_init_board(void)
 			printf ("\n");
 
 			/* inbound */
-			pci_set_region(hose->regions + 0,
-					CFG_PCI_MEMORY_BUS,
-					CFG_PCI_MEMORY_PHYS,
-					CFG_PCI_MEMORY_SIZE,
-					PCI_REGION_MEM | PCI_REGION_MEMORY);
+			r += fsl_pci_setup_inbound_windows(r);
 
 			/* outbound memory */
-			pci_set_region(hose->regions + 1,
-					CFG_PCIE3_MEM_BASE,
-					CFG_PCIE3_MEM_PHYS,
-					CFG_PCIE3_MEM_SIZE,
+			pci_set_region(r++,
+					CONFIG_SYS_PCIE3_MEM_BASE,
+					CONFIG_SYS_PCIE3_MEM_PHYS,
+					CONFIG_SYS_PCIE3_MEM_SIZE,
 					PCI_REGION_MEM);
 
 			/* outbound io */
-			pci_set_region(hose->regions + 2,
-					CFG_PCIE3_IO_BASE,
-					CFG_PCIE3_IO_PHYS,
-					CFG_PCIE3_IO_SIZE,
+			pci_set_region(r++,
+					CONFIG_SYS_PCIE3_IO_BASE,
+					CONFIG_SYS_PCIE3_IO_PHYS,
+					CONFIG_SYS_PCIE3_IO_SIZE,
 					PCI_REGION_IO);
 
-			hose->region_count = 3;
+			hose->region_count = r - hose->regions;
 			hose->first_busno=first_free_busno;
 			pci_setup_indirect(hose, (int) &pci->cfg_addr, (int) &pci->cfg_data);
 
@@ -225,7 +215,7 @@ void pci_init_board(void)
 
 			pci_hose_read_config_dword(hose, PCI_BDF(2, 0x1d, 0 ),
 					PCI_BASE_ADDRESS_1, &temp32);
-			if (temp32 >= CFG_PCIE3_MEM_PHYS) {
+			if (temp32 >= CONFIG_SYS_PCIE3_MEM_PHYS) {
 				debug(" uli1572 read to %x\n", temp32);
 				in_be32((unsigned *)temp32);
 			}
@@ -240,12 +230,12 @@ void pci_init_board(void)
 
 #ifdef CONFIG_PCIE2
 	{
-		volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CFG_PCIE2_ADDR;
-		extern void fsl_pci_init(struct pci_controller *hose);
+		volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCIE2_ADDR;
 		struct pci_controller *hose = &pcie2_hose;
 		int pcie_ep = (host_agent == 2) || (host_agent == 4) ||
-			(host_agent == 6);
+			(host_agent == 6) || (host_agent == 0);
 		int pcie_configured  = io_sel & 4;
+		struct pci_region *r = hose->regions;
 
 		if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE)){
 			printf ("\n    PCIE2 connected to Slot 1 as %s (base address %x)",
@@ -258,27 +248,23 @@ void pci_init_board(void)
 			printf ("\n");
 
 			/* inbound */
-			pci_set_region(hose->regions + 0,
-					CFG_PCI_MEMORY_BUS,
-					CFG_PCI_MEMORY_PHYS,
-					CFG_PCI_MEMORY_SIZE,
-					PCI_REGION_MEM | PCI_REGION_MEMORY);
+			r += fsl_pci_setup_inbound_windows(r);
 
 			/* outbound memory */
-			pci_set_region(hose->regions + 1,
-					CFG_PCIE2_MEM_BASE,
-					CFG_PCIE2_MEM_PHYS,
-					CFG_PCIE2_MEM_SIZE,
+			pci_set_region(r++,
+					CONFIG_SYS_PCIE2_MEM_BASE,
+					CONFIG_SYS_PCIE2_MEM_PHYS,
+					CONFIG_SYS_PCIE2_MEM_SIZE,
 					PCI_REGION_MEM);
 
 			/* outbound io */
-			pci_set_region(hose->regions + 2,
-					CFG_PCIE2_IO_BASE,
-					CFG_PCIE2_IO_PHYS,
-					CFG_PCIE2_IO_SIZE,
+			pci_set_region(r++,
+					CONFIG_SYS_PCIE2_IO_BASE,
+					CONFIG_SYS_PCIE2_IO_PHYS,
+					CONFIG_SYS_PCIE2_IO_SIZE,
 					PCI_REGION_IO);
 
-			hose->region_count = 3;
+			hose->region_count = r - hose->regions;
 			hose->first_busno=first_free_busno;
 			pci_setup_indirect(hose, (int) &pci->cfg_addr, (int) &pci->cfg_data);
 
@@ -297,12 +283,12 @@ void pci_init_board(void)
 #endif
 #ifdef CONFIG_PCIE1
 	{
-		volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CFG_PCIE1_ADDR;
-		extern void fsl_pci_init(struct pci_controller *hose);
+		volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCIE1_ADDR;
 		struct pci_controller *hose = &pcie1_hose;
-		int pcie_ep = (host_agent == 1) || (host_agent == 4) ||
+		int pcie_ep = (host_agent <= 1) || (host_agent == 4) ||
 			(host_agent == 5);
 		int pcie_configured  = io_sel & 6;
+		struct pci_region *r = hose->regions;
 
 		if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE)){
 			printf ("\n    PCIE1 connected to Slot 2 as %s (base address %x)",
@@ -315,27 +301,23 @@ void pci_init_board(void)
 			printf ("\n");
 
 			/* inbound */
-			pci_set_region(hose->regions + 0,
-					CFG_PCI_MEMORY_BUS,
-					CFG_PCI_MEMORY_PHYS,
-					CFG_PCI_MEMORY_SIZE,
-					PCI_REGION_MEM | PCI_REGION_MEMORY);
+			r += fsl_pci_setup_inbound_windows(r);
 
 			/* outbound memory */
-			pci_set_region(hose->regions + 1,
-					CFG_PCIE1_MEM_BASE,
-					CFG_PCIE1_MEM_PHYS,
-					CFG_PCIE1_MEM_SIZE,
+			pci_set_region(r++,
+					CONFIG_SYS_PCIE1_MEM_BASE,
+					CONFIG_SYS_PCIE1_MEM_PHYS,
+					CONFIG_SYS_PCIE1_MEM_SIZE,
 					PCI_REGION_MEM);
 
 			/* outbound io */
-			pci_set_region(hose->regions + 2,
-					CFG_PCIE1_IO_BASE,
-					CFG_PCIE1_IO_PHYS,
-					CFG_PCIE1_IO_SIZE,
+			pci_set_region(r++,
+					CONFIG_SYS_PCIE1_IO_BASE,
+					CONFIG_SYS_PCIE1_IO_PHYS,
+					CONFIG_SYS_PCIE1_IO_SIZE,
 					PCI_REGION_IO);
 
-			hose->region_count = 3;
+			hose->region_count = r - hose->regions;
 			hose->first_busno=first_free_busno;
 
 			pci_setup_indirect(hose, (int) &pci->cfg_addr, (int) &pci->cfg_data);
@@ -359,8 +341,7 @@ void pci_init_board(void)
 
 int board_early_init_r(void)
 {
-	unsigned int i;
-	const unsigned int flashbase = CFG_FLASH_BASE;
+	const unsigned int flashbase = CONFIG_SYS_FLASH_BASE;
 	const u8 flash_esel = 2;
 
 	/*
@@ -368,11 +349,9 @@ int board_early_init_r(void)
 	 * so that flash can be erased properly.
 	 */
 
-	/* Invalidate any remaining lines of the flash from caches. */
-	for (i = 0; i < 256*1024*1024; i+=32) {
-		asm volatile ("dcbi %0,%1": : "b" (flashbase), "r" (i));
-		asm volatile ("icbi %0,%1": : "b" (flashbase), "r" (i));
-	}
+	/* Flush d-cache and invalidate i-cache of any FLASH data */
+	flush_dcache();
+	invalidate_icache();
 
 	/* invalidate existing TLB entry for flash + promjet */
 	disable_tlb(flash_esel);
@@ -521,11 +500,58 @@ unsigned long get_board_ddr_clk(ulong dummy)
 }
 #endif
 
+#ifdef CONFIG_TSEC_ENET
+int board_eth_init(bd_t *bis)
+{
+	struct tsec_info_struct tsec_info[4];
+	volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+	int num = 0;
+
+#ifdef CONFIG_TSEC1
+	SET_STD_TSEC_INFO(tsec_info[num], 1);
+	if (!(gur->pordevsr & MPC85xx_PORDEVSR_SGMII1_DIS))
+		tsec_info[num].flags |= TSEC_SGMII;
+	num++;
+#endif
+#ifdef CONFIG_TSEC2
+	SET_STD_TSEC_INFO(tsec_info[num], 2);
+	if (!(gur->pordevsr & MPC85xx_PORDEVSR_SGMII2_DIS))
+		tsec_info[num].flags |= TSEC_SGMII;
+	num++;
+#endif
+#ifdef CONFIG_TSEC3
+	SET_STD_TSEC_INFO(tsec_info[num], 3);
+	if (!(gur->pordevsr & MPC85xx_PORDEVSR_SGMII3_DIS))
+		tsec_info[num].flags |= TSEC_SGMII;
+	num++;
+#endif
+#ifdef CONFIG_TSEC4
+	SET_STD_TSEC_INFO(tsec_info[num], 4);
+	if (!(gur->pordevsr & MPC85xx_PORDEVSR_SGMII4_DIS))
+		tsec_info[num].flags |= TSEC_SGMII;
+	num++;
+#endif
+
+	if (!num) {
+		printf("No TSECs initialized\n");
+
+		return 0;
+	}
+
+	fsl_sgmii_riser_init(tsec_info, num);
+
+	tsec_eth_init(bis, tsec_info, num);
+
+	return 0;
+}
+#endif
+
 #if defined(CONFIG_OF_BOARD_SETUP)
+extern void ft_fsl_pci_setup(void *blob, const char *pci_alias,
+			struct pci_controller *hose);
+
 void ft_board_setup(void *blob, bd_t *bd)
 {
-	int node, tmp[2];
-	const char *path;
 	ulong base, size;
 
 	ft_cpu_setup(blob, bd);
@@ -535,31 +561,15 @@ void ft_board_setup(void *blob, bd_t *bd)
 
 	fdt_fixup_memory(blob, (u64)base, (u64)size);
 
-	node = fdt_path_offset(blob, "/aliases");
-	tmp[0] = 0;
-	if (node >= 0) {
 #ifdef CONFIG_PCIE3
-		path = fdt_getprop(blob, node, "pci0", NULL);
-		if (path) {
-			tmp[1] = pcie3_hose.last_busno - pcie3_hose.first_busno;
-			do_fixup_by_path(blob, path, "bus-range", &tmp, 8, 1);
-		}
+	ft_fsl_pci_setup(blob, "pci0", &pcie3_hose);
 #endif
 #ifdef CONFIG_PCIE2
-		path = fdt_getprop(blob, node, "pci1", NULL);
-		if (path) {
-			tmp[1] = pcie2_hose.last_busno - pcie2_hose.first_busno;
-			do_fixup_by_path(blob, path, "bus-range", &tmp, 8, 1);
-		}
+	ft_fsl_pci_setup(blob, "pci1", &pcie2_hose);
 #endif
 #ifdef CONFIG_PCIE1
-		path = fdt_getprop(blob, node, "pci2", NULL);
-		if (path) {
-			tmp[1] = pcie1_hose.last_busno - pcie1_hose.first_busno;
-			do_fixup_by_path(blob, path, "bus-range", &tmp, 8, 1);
-		}
+	ft_fsl_pci_setup(blob, "pci2", &pcie1_hose);
 #endif
-	}
 }
 #endif
 
diff --git a/board/freescale/mpc8572ds/tlb.c b/board/freescale/mpc8572ds/tlb.c
index 965356a84..8d1f646fa 100644
--- a/board/freescale/mpc8572ds/tlb.c
+++ b/board/freescale/mpc8572ds/tlb.c
@@ -28,16 +28,16 @@
 
 struct fsl_e_tlb_entry tlb_table[] = {
 	/* TLB 0 - for temp stack in cache */
-	SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR, CFG_INIT_RAM_ADDR,
+	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR, CONFIG_SYS_INIT_RAM_ADDR,
 		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
 		      0, 0, BOOKE_PAGESZ_4K, 0),
-	SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR + 4 * 1024 , CFG_INIT_RAM_ADDR + 4 * 1024,
+	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024 , CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024,
 		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
 		      0, 0, BOOKE_PAGESZ_4K, 0),
-	SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR + 8 * 1024 , CFG_INIT_RAM_ADDR + 8 * 1024,
+	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024 , CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024,
 		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
 		      0, 0, BOOKE_PAGESZ_4K, 0),
-	SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR + 12 * 1024 , CFG_INIT_RAM_ADDR + 12 * 1024,
+	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024 , CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024,
 		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
 		      0, 0, BOOKE_PAGESZ_4K, 0),
 
@@ -52,34 +52,40 @@ struct fsl_e_tlb_entry tlb_table[] = {
 		      0, 0, BOOKE_PAGESZ_4K, 1),
 
 	/* *I*G* - CCSRBAR */
-	SET_TLB_ENTRY(1, CFG_CCSRBAR, CFG_CCSRBAR_PHYS,
+	SET_TLB_ENTRY(1, CONFIG_SYS_CCSRBAR, CONFIG_SYS_CCSRBAR_PHYS,
 		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 		      0, 1, BOOKE_PAGESZ_1M, 1),
 
 	/* W**G* - Flash/promjet, localbus */
 	/* This will be changed to *I*G* after relocation to RAM. */
-	SET_TLB_ENTRY(1, CFG_FLASH_BASE, CFG_FLASH_BASE,
-		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_W|MAS2_G,
+	SET_TLB_ENTRY(1, CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE,
+		      MAS3_SX|MAS3_SR, MAS2_W|MAS2_G,
 		      0, 2, BOOKE_PAGESZ_256M, 1),
 
 	/* *I*G* - PCI */
-	SET_TLB_ENTRY(1, CFG_PCIE3_MEM_PHYS, CFG_PCIE3_MEM_PHYS,
+	SET_TLB_ENTRY(1, CONFIG_SYS_PCIE3_MEM_PHYS, CONFIG_SYS_PCIE3_MEM_PHYS,
 		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 		      0, 3, BOOKE_PAGESZ_1G, 1),
 
 	/* *I*G* - PCI */
-	SET_TLB_ENTRY(1, CFG_PCIE3_MEM_PHYS + 0x40000000, CFG_PCIE3_MEM_PHYS + 0x40000000,
+	SET_TLB_ENTRY(1, CONFIG_SYS_PCIE3_MEM_PHYS + 0x40000000, CONFIG_SYS_PCIE3_MEM_PHYS + 0x40000000,
 		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 		      0, 4, BOOKE_PAGESZ_256M, 1),
 
-	SET_TLB_ENTRY(1, CFG_PCIE3_MEM_PHYS + 0x50000000, CFG_PCIE3_MEM_PHYS + 0x50000000,
+	SET_TLB_ENTRY(1, CONFIG_SYS_PCIE3_MEM_PHYS + 0x50000000, CONFIG_SYS_PCIE3_MEM_PHYS + 0x50000000,
 		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 		      0, 5, BOOKE_PAGESZ_256M, 1),
 
 	/* *I*G* - PCI I/O */
-	SET_TLB_ENTRY(1, CFG_PCIE3_IO_PHYS, CFG_PCIE3_IO_PHYS,
+	SET_TLB_ENTRY(1, CONFIG_SYS_PCIE3_IO_PHYS, CONFIG_SYS_PCIE3_IO_PHYS,
 		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 		      0, 6, BOOKE_PAGESZ_256K, 1),
+
+	/* *I*G - NAND */
+	SET_TLB_ENTRY(1, CONFIG_SYS_NAND_BASE, CONFIG_SYS_NAND_BASE_PHYS,
+		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+		      0, 7, BOOKE_PAGESZ_1M, 1),
+
 };
 
 int num_tlb_entries = ARRAY_SIZE(tlb_table);
diff --git a/board/freescale/mpc8610hpcd/ddr.c b/board/freescale/mpc8610hpcd/ddr.c
index 2d22da177..414ac243a 100644
--- a/board/freescale/mpc8610hpcd/ddr.c
+++ b/board/freescale/mpc8610hpcd/ddr.c
@@ -10,6 +10,7 @@
 #include <i2c.h>
 
 #include <asm/fsl_ddr_sdram.h>
+#include <asm/fsl_ddr_dimm_params.h>
 
 static void
 get_spd(ddr2_spd_eeprom_t *spd, unsigned char i2c_address)
@@ -36,7 +37,9 @@ void fsl_ddr_get_spd(ddr2_spd_eeprom_t *ctrl_dimms_spd,
 	}
 }
 
-void fsl_ddr_board_options(memctl_options_t *popts, unsigned int ctrl_num)
+void fsl_ddr_board_options(memctl_options_t *popts,
+				dimm_params_t *pdimm,
+				unsigned int ctrl_num)
 {
 	/*
 	 * Factors to consider for clock adjust:
diff --git a/board/freescale/mpc8610hpcd/law.c b/board/freescale/mpc8610hpcd/law.c
index 91b922b86..2aad28aee 100644
--- a/board/freescale/mpc8610hpcd/law.c
+++ b/board/freescale/mpc8610hpcd/law.c
@@ -29,16 +29,16 @@
 
 struct law_entry law_table[] = {
 #if !defined(CONFIG_SPD_EEPROM)
-	SET_LAW(CFG_DDR_SDRAM_BASE, LAW_SIZE_512M, LAW_TRGT_IF_DDR_1),
+	SET_LAW(CONFIG_SYS_DDR_SDRAM_BASE, LAW_SIZE_512M, LAW_TRGT_IF_DDR_1),
 #endif
-	SET_LAW(CFG_PCIE1_MEM_BASE, LAW_SIZE_256M, LAW_TRGT_IF_PCIE_1),
-	SET_LAW(CFG_PCIE2_MEM_BASE, LAW_SIZE_256M, LAW_TRGT_IF_PCIE_2),
+	SET_LAW(CONFIG_SYS_PCIE1_MEM_BASE, LAW_SIZE_256M, LAW_TRGT_IF_PCIE_1),
+	SET_LAW(CONFIG_SYS_PCIE2_MEM_BASE, LAW_SIZE_256M, LAW_TRGT_IF_PCIE_2),
 	SET_LAW(PIXIS_BASE, LAW_SIZE_2M, LAW_TRGT_IF_LBC),
-	SET_LAW(CFG_PCIE1_IO_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_PCIE_1),
-	SET_LAW(CFG_PCIE2_IO_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_PCIE_2),
-	SET_LAW(CFG_FLASH_BASE, LAW_SIZE_256M, LAW_TRGT_IF_LBC),
-	SET_LAW(CFG_PCI1_MEM_PHYS, LAW_SIZE_256M, LAW_TRGT_IF_PCI_1),
-	SET_LAW(CFG_PCI1_IO_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_PCI_1)
+	SET_LAW(CONFIG_SYS_PCIE1_IO_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_PCIE_1),
+	SET_LAW(CONFIG_SYS_PCIE2_IO_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_PCIE_2),
+	SET_LAW(CONFIG_SYS_FLASH_BASE, LAW_SIZE_256M, LAW_TRGT_IF_LBC),
+	SET_LAW(CONFIG_SYS_PCI1_MEM_PHYS, LAW_SIZE_256M, LAW_TRGT_IF_PCI_1),
+	SET_LAW(CONFIG_SYS_PCI1_IO_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_PCI_1)
 };
 
 int num_law_entries = ARRAY_SIZE(law_table);
diff --git a/board/freescale/mpc8610hpcd/mpc8610hpcd.c b/board/freescale/mpc8610hpcd/mpc8610hpcd.c
index af79fc2c6..2792778e3 100644
--- a/board/freescale/mpc8610hpcd/mpc8610hpcd.c
+++ b/board/freescale/mpc8610hpcd/mpc8610hpcd.c
@@ -32,22 +32,19 @@
 #include <libfdt.h>
 #include <fdt_support.h>
 #include <spd_sdram.h>
+#include <netdev.h>
 
 #include "../common/pixis.h"
 
-#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
-extern void ddr_enable_ecc(unsigned int dram_size);
-#endif
-
 void sdram_init(void);
-long int fixed_sdram(void);
+phys_size_t fixed_sdram(void);
 void mpc8610hpcd_diu_init(void);
 
 
 /* called before any console output */
 int board_early_init_f(void)
 {
-	volatile immap_t *immap = (immap_t *)CFG_IMMR;
+	volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR;
 	volatile ccsr_gur_t *gur = &immap->im_gur;
 
 	gur->gpiocr |= 0x88aa5500; /* DIU16, IR1, UART0, UART2 */
@@ -97,7 +94,7 @@ int misc_init_r(void)
 
 int checkboard(void)
 {
-	volatile immap_t *immap = (immap_t *)CFG_IMMR;
+	volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR;
 	volatile ccsr_local_mcm_t *mcm = &immap->im_local_mcm;
 
 	printf ("Board: MPC8610HPCD, System ID: 0x%02x, "
@@ -120,7 +117,7 @@ int checkboard(void)
 phys_size_t
 initdram(int board_type)
 {
-	long dram_size = 0;
+	phys_size_t dram_size = 0;
 
 #if defined(CONFIG_SPD_EEPROM)
 	dram_size = fsl_ddr_sdram();
@@ -128,18 +125,11 @@ initdram(int board_type)
 	dram_size = fixed_sdram();
 #endif
 
-#if defined(CFG_RAMBOOT)
+#if defined(CONFIG_SYS_RAMBOOT)
 	puts(" DDR: ");
 	return dram_size;
 #endif
 
-#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
-	/*
-	 * Initialize and enable DDR ECC.
-	 */
-	ddr_enable_ecc(dram_size);
-#endif
-
 	puts(" DDR: ");
 	return dram_size;
 }
@@ -150,10 +140,10 @@ initdram(int board_type)
  * Fixed sdram init -- doesn't use serial presence detect.
  */
 
-long int fixed_sdram(void)
+phys_size_t fixed_sdram(void)
 {
-#if !defined(CFG_RAMBOOT)
-	volatile immap_t *immap = (immap_t *)CFG_IMMR;
+#if !defined(CONFIG_SYS_RAMBOOT)
+	volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR;
 	volatile ccsr_ddr_t *ddr = &immap->im_ddr1;
 	uint d_init;
 
@@ -200,7 +190,7 @@ long int fixed_sdram(void)
 
 	return 512 * 1024 * 1024;
 #endif
-	return CFG_SDRAM_SIZE * 1024 * 1024;
+	return CONFIG_SYS_SDRAM_SIZE * 1024 * 1024;
 }
 
 #endif
@@ -239,9 +229,12 @@ static struct pci_controller pcie2_hose;
 
 int first_free_busno = 0;
 
+extern int fsl_pci_setup_inbound_windows(struct pci_region *r);
+extern void fsl_pci_init(struct pci_controller *hose);
+
 void pci_init_board(void)
 {
-	volatile immap_t *immap = (immap_t *) CFG_CCSRBAR;
+	volatile immap_t *immap = (immap_t *) CONFIG_SYS_CCSRBAR;
 	volatile ccsr_gur_t *gur = &immap->im_gur;
 	uint devdisr = gur->devdisr;
 	uint io_sel = (gur->pordevsr & MPC8610_PORDEVSR_IO_SEL)
@@ -254,12 +247,12 @@ void pci_init_board(void)
 
 #ifdef CONFIG_PCIE1
  {
-	volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CFG_PCIE1_ADDR;
-	extern void fsl_pci_init(struct pci_controller *hose);
+	volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCIE1_ADDR;
 	struct pci_controller *hose = &pcie1_hose;
 	int pcie_configured = (io_sel == 1) || (io_sel == 4);
 	int pcie_ep = (host_agent == 0) || (host_agent == 2) ||
 		(host_agent == 5);
+	struct pci_region *r = hose->regions;
 
 	if (pcie_configured && !(devdisr & MPC86xx_DEVDISR_PCIE1)) {
 		printf(" PCIe 1 connected to Uli as %s (base address %x)\n",
@@ -269,27 +262,23 @@ void pci_init_board(void)
 			pci->pme_msg_det = 0xffffffff;
 
 		/* inbound */
-		pci_set_region(hose->regions + 0,
-			 CFG_PCI_MEMORY_BUS,
-			 CFG_PCI_MEMORY_PHYS,
-			 CFG_PCI_MEMORY_SIZE,
-			 PCI_REGION_MEM | PCI_REGION_MEMORY);
+		r += fsl_pci_setup_inbound_windows(r);
 
 		/* outbound memory */
-		pci_set_region(hose->regions + 1,
-			 CFG_PCIE1_MEM_BASE,
-			 CFG_PCIE1_MEM_PHYS,
-			 CFG_PCIE1_MEM_SIZE,
+		pci_set_region(r++,
+			 CONFIG_SYS_PCIE1_MEM_BASE,
+			 CONFIG_SYS_PCIE1_MEM_PHYS,
+			 CONFIG_SYS_PCIE1_MEM_SIZE,
 			 PCI_REGION_MEM);
 
 		/* outbound io */
-		pci_set_region(hose->regions + 2,
-			 CFG_PCIE1_IO_BASE,
-			 CFG_PCIE1_IO_PHYS,
-			 CFG_PCIE1_IO_SIZE,
+		pci_set_region(r++,
+			 CONFIG_SYS_PCIE1_IO_BASE,
+			 CONFIG_SYS_PCIE1_IO_PHYS,
+			 CONFIG_SYS_PCIE1_IO_SIZE,
 			 PCI_REGION_IO);
 
-		hose->region_count = 3;
+		hose->region_count = r - hose->regions;
 
 		hose->first_busno = first_free_busno;
 		pci_setup_indirect(hose, (int)&pci->cfg_addr,
@@ -311,9 +300,9 @@ void pci_init_board(void)
 
 #ifdef CONFIG_PCIE2
  {
-	volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CFG_PCIE2_ADDR;
-	extern void fsl_pci_init(struct pci_controller *hose);
+	volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCIE2_ADDR;
 	struct pci_controller *hose = &pcie2_hose;
+	struct pci_region *r = hose->regions;
 
 	int pcie_configured = (io_sel == 0) || (io_sel == 4);
 	int pcie_ep = (host_agent == 0) || (host_agent == 1) ||
@@ -328,27 +317,23 @@ void pci_init_board(void)
 			pci->pme_msg_det = 0xffffffff;
 
 		/* inbound */
-		pci_set_region(hose->regions + 0,
-			 CFG_PCI_MEMORY_BUS,
-			 CFG_PCI_MEMORY_PHYS,
-			 CFG_PCI_MEMORY_SIZE,
-			 PCI_REGION_MEM | PCI_REGION_MEMORY);
+		r += fsl_pci_setup_inbound_windows(r);
 
 		/* outbound memory */
-		pci_set_region(hose->regions + 1,
-			 CFG_PCIE2_MEM_BASE,
-			 CFG_PCIE2_MEM_PHYS,
-			 CFG_PCIE2_MEM_SIZE,
+		pci_set_region(r++,
+			 CONFIG_SYS_PCIE2_MEM_BASE,
+			 CONFIG_SYS_PCIE2_MEM_PHYS,
+			 CONFIG_SYS_PCIE2_MEM_SIZE,
 			 PCI_REGION_MEM);
 
 		/* outbound io */
-		pci_set_region(hose->regions + 2,
-			 CFG_PCIE2_IO_BASE,
-			 CFG_PCIE2_IO_PHYS,
-			 CFG_PCIE2_IO_SIZE,
+		pci_set_region(r++,
+			 CONFIG_SYS_PCIE2_IO_BASE,
+			 CONFIG_SYS_PCIE2_IO_PHYS,
+			 CONFIG_SYS_PCIE2_IO_SIZE,
 			 PCI_REGION_IO);
 
-		hose->region_count = 3;
+		hose->region_count = r - hose->regions;
 
 		hose->first_busno = first_free_busno;
 		pci_setup_indirect(hose, (int)&pci->cfg_addr,
@@ -369,10 +354,10 @@ void pci_init_board(void)
 
 #ifdef CONFIG_PCI1
  {
-	volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CFG_PCI1_ADDR;
-	extern void fsl_pci_init(struct pci_controller *hose);
+	volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCI1_ADDR;
 	struct pci_controller *hose = &pci1_hose;
 	int pci_agent = (host_agent >= 4) && (host_agent <= 6);
+	struct pci_region *r = hose->regions;
 
 	if ( !(devdisr & MPC86xx_DEVDISR_PCI1)) {
 		printf(" PCI connected to PCI slots as %s" \
@@ -381,27 +366,23 @@ void pci_init_board(void)
 			(uint)pci);
 
 		/* inbound */
-		pci_set_region(hose->regions + 0,
-			 CFG_PCI_MEMORY_BUS,
-			 CFG_PCI_MEMORY_PHYS,
-			 CFG_PCI_MEMORY_SIZE,
-			 PCI_REGION_MEM | PCI_REGION_MEMORY);
+		r += fsl_pci_setup_inbound_windows(r);
 
 		/* outbound memory */
-		pci_set_region(hose->regions + 1,
-			 CFG_PCI1_MEM_BASE,
-			 CFG_PCI1_MEM_PHYS,
-			 CFG_PCI1_MEM_SIZE,
+		pci_set_region(r++,
+			 CONFIG_SYS_PCI1_MEM_BASE,
+			 CONFIG_SYS_PCI1_MEM_PHYS,
+			 CONFIG_SYS_PCI1_MEM_SIZE,
 			 PCI_REGION_MEM);
 
 		/* outbound io */
-		pci_set_region(hose->regions + 2,
-			 CFG_PCI1_IO_BASE,
-			 CFG_PCI1_IO_PHYS,
-			 CFG_PCI1_IO_SIZE,
+		pci_set_region(r++,
+			 CONFIG_SYS_PCI1_IO_BASE,
+			 CONFIG_SYS_PCI1_IO_PHYS,
+			 CONFIG_SYS_PCI1_IO_SIZE,
 			 PCI_REGION_IO);
 
-		hose->region_count = 3;
+		hose->region_count = r - hose->regions;
 
 		hose->first_busno = first_free_busno;
 		pci_setup_indirect(hose, (int) &pci->cfg_addr,
@@ -421,12 +402,12 @@ void pci_init_board(void)
 }
 
 #if defined(CONFIG_OF_BOARD_SETUP)
+extern void ft_fsl_pci_setup(void *blob, const char *pci_alias,
+			struct pci_controller *hose);
+
 void
 ft_board_setup(void *blob, bd_t *bd)
 {
-	int node, tmp[2];
-	const char *path;
-
 	do_fixup_by_prop_u32(blob, "device_type", "cpu", 4,
 			     "timebase-frequency", bd->bi_busfreq / 4, 1);
 	do_fixup_by_prop_u32(blob, "device_type", "cpu", 4,
@@ -441,36 +422,15 @@ ft_board_setup(void *blob, bd_t *bd)
 
 	fdt_fixup_memory(blob, bd->bi_memstart, bd->bi_memsize);
 
-
-	node = fdt_path_offset(blob, "/aliases");
-	tmp[0] = 0;
-	if (node >= 0) {
-
 #ifdef CONFIG_PCI1
-		path = fdt_getprop(blob, node, "pci0", NULL);
-		if (path) {
-			tmp[1] = pci1_hose.last_busno - pci1_hose.first_busno;
-			do_fixup_by_path(blob, path, "bus-range", &tmp, 8, 1);
-		}
-
+	ft_fsl_pci_setup(blob, "pci0", &pci1_hose);
 #endif
 #ifdef CONFIG_PCIE1
-		path = fdt_getprop(blob, node, "pci1", NULL);
-		if (path) {
-			tmp[1] = pcie1_hose.last_busno
-				- pcie1_hose.first_busno;
-			do_fixup_by_path(blob, path, "bus-range", &tmp, 8, 1);
-	}
+	ft_fsl_pci_setup(blob, "pci1", &pcie1_hose);
 #endif
 #ifdef CONFIG_PCIE2
-		path = fdt_getprop(blob, node, "pci2", NULL);
-		if (path) {
-			tmp[1] = pcie2_hose.last_busno
-				- pcie2_hose.first_busno;
-			do_fixup_by_path(blob, path, "bus-range", &tmp, 8, 1);
-		}
+	ft_fsl_pci_setup(blob, "pci2", &pcie2_hose);
 #endif
-	}
 }
 #endif
 
@@ -520,12 +480,7 @@ get_board_sys_clk(ulong dummy)
 	return val;
 }
 
-extern int uli526x_initialize(bd_t *);
-
 int board_eth_init(bd_t *bis)
 {
-#if defined(CONFIG_ULI526)
-	uli526x_initialize(bis);
-#endif
-	return 0;
+	return pci_eth_init(bis);
 }
diff --git a/board/freescale/mpc8610hpcd/mpc8610hpcd_diu.c b/board/freescale/mpc8610hpcd/mpc8610hpcd_diu.c
index 4db941ced..cd25d4aa8 100644
--- a/board/freescale/mpc8610hpcd/mpc8610hpcd_diu.c
+++ b/board/freescale/mpc8610hpcd/mpc8610hpcd_diu.c
@@ -43,7 +43,7 @@ static int xres, yres;
 
 void diu_set_pixel_clock(unsigned int pixclock)
 {
-	volatile immap_t *immap = (immap_t *)CFG_IMMR;
+	volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR;
 	volatile ccsr_gur_t *gur = &immap->im_gur;
 	volatile unsigned int *guts_clkdvdr = &gur->clkdvdr;
 	unsigned long speed_ccb, temp, pixval;
@@ -137,7 +137,7 @@ int mpc8610diu_init_show_bmp(cmd_tbl_t *cmdtp,
 }
 
 U_BOOT_CMD(
-	diufb, CFG_MAXARGS, 1, mpc8610diu_init_show_bmp,
+	diufb, CONFIG_SYS_MAXARGS, 1, mpc8610diu_init_show_bmp,
 	"diufb init | addr - Init or Display BMP file\n",
 	"init\n    - initialize DIU\n"
 	"addr\n    - display bmp at address 'addr'\n"
diff --git a/board/freescale/mpc8610hpcd/u-boot.lds b/board/freescale/mpc8610hpcd/u-boot.lds
index b88138e19..41274923d 100644
--- a/board/freescale/mpc8610hpcd/u-boot.lds
+++ b/board/freescale/mpc8610hpcd/u-boot.lds
@@ -128,6 +128,7 @@ SECTIONS
    *(.dynbss)
    *(.bss)
    *(COMMON)
+   . = ALIGN(4);
   }
   _end = . ;
   PROVIDE (end = .);
diff --git a/board/freescale/mpc8641hpcn/config.mk b/board/freescale/mpc8641hpcn/config.mk
index f778dcbe0..487a76699 100644
--- a/board/freescale/mpc8641hpcn/config.mk
+++ b/board/freescale/mpc8641hpcn/config.mk
@@ -25,7 +25,7 @@
 # default CCSRBAR is at 0xff700000
 # assume U-Boot is less than 0.5MB
 #
-TEXT_BASE = 0xfff00000
+TEXT_BASE = 0xeff00000
 
 PLATFORM_CPPFLAGS += -DCONFIG_MPC86xx=1
 PLATFORM_CPPFLAGS += -DCONFIG_MPC8641=1 -maltivec -mabi=altivec -msoft-float
diff --git a/board/freescale/mpc8641hpcn/ddr.c b/board/freescale/mpc8641hpcn/ddr.c
index 5163abf05..3789b5442 100644
--- a/board/freescale/mpc8641hpcn/ddr.c
+++ b/board/freescale/mpc8641hpcn/ddr.c
@@ -10,6 +10,7 @@
 #include <i2c.h>
 
 #include <asm/fsl_ddr_sdram.h>
+#include <asm/fsl_ddr_dimm_params.h>
 
 static void
 get_spd(ddr2_spd_eeprom_t *spd, unsigned char i2c_address)
@@ -45,44 +46,120 @@ void fsl_ddr_get_spd(ddr2_spd_eeprom_t *ctrl_dimms_spd,
 	}
 }
 
-void fsl_ddr_board_options(memctl_options_t *popts, unsigned int ctrl_num)
+typedef struct {
+	u32 datarate_mhz_low;
+	u32 datarate_mhz_high;
+	u32 n_ranks;
+	u32 clk_adjust;
+	u32 cpo;
+	u32 write_data_delay;
+} board_specific_parameters_t;
+
+/* XXX: these values need to be checked for all interleaving modes.  */
+const board_specific_parameters_t board_specific_parameters[2][16] = {
+	{
+	/* 	memory controller 0		 	*/
+	/*	  lo|  hi|  num|  clk| cpo|wrdata	*/
+	/*	 mhz| mhz|ranks|adjst|    | delay	*/
+		{  0, 333,    4,    7,   7,     3},
+		{334, 400,    4,    7,   9,     3},
+		{401, 549,    4,    7,   9,     3},
+		{550, 650,    4,    7,  10,     4},
+
+		{  0, 333,    3,    7,   7,     3},
+		{334, 400,    3,    7,   9,     3},
+		{401, 549,    3,    7,   9,     3},
+		{550, 650,    3,    7,  10,     4},
+
+		{  0, 333,    2,    7,   7,     3},
+		{334, 400,    2,    7,   9,     3},
+		{401, 549,    2,    7,   9,     3},
+		{550, 650,    2,    7,  10,     4},
+
+		{  0, 333,    1,    7,   7,     3},
+		{334, 400,    1,    7,   9,     3},
+		{401, 549,    1,    7,   9,     3},
+		{550, 650,    1,    7,  10,     4}
+	},
+
+	{
+	/* 	memory controller 1			*/
+	/*	  lo|  hi|  num|  clk| cpo|wrdata	*/
+	/*       mhz| mhz|ranks|adjst|    | delay	*/
+		{  0, 333,    4,    7,   7,    3},
+		{334, 400,    4,    7,   9,    3},
+		{401, 549,    4,    7,   9,    3},
+		{550, 650,    4,    7,  10,    4},
+
+		{  0, 333,    3,    7,   7,    3},
+		{334, 400,    3,    7,   9,    3},
+		{401, 549,    3,    7,   9,    3},
+		{550, 650,    3,    7,  10,    4},
+
+		{  0, 333,    2,    7,   7,    3},
+		{334, 400,    2,    7,   9,    3},
+		{401, 549,    2,    7,   9,    3},
+		{550, 650,    2,    7,  10,    4},
+
+		{  0, 333,    1,    7,   7,    3},
+		{334, 400,    1,    7,   9,    3},
+		{401, 549,    1,    7,   9,    3},
+		{550, 650,    1,    7,  10,    4}
+	}
+};
+
+void fsl_ddr_board_options(memctl_options_t *popts,
+			dimm_params_t *pdimm,
+			unsigned int ctrl_num)
 {
-	/*
-	 * Factors to consider for clock adjust:
-	 *	- number of chips on bus
-	 *	- position of slot
-	 *	- DDR1 vs. DDR2?
-	 *	- ???
-	 *
-	 * This needs to be determined on a board-by-board basis.
-	 *	0110	3/4 cycle late
-	 *	0111	7/8 cycle late
-	 */
-	popts->clk_adjust = 7;
+	const board_specific_parameters_t *pbsp =
+			&(board_specific_parameters[ctrl_num][0]);
+	u32 num_params = sizeof(board_specific_parameters[ctrl_num]) /
+			sizeof(board_specific_parameters[0][0]);
+	u32 i;
+	u32 j;
+	ulong ddr_freq;
 
-	/*
-	 * Factors to consider for CPO:
-	 *	- frequency
-	 *	- ddr1 vs. ddr2
+	/* set odt_rd_cfg and odt_wr_cfg. If the there is only one dimm in
+	 * that controller, set odt_wr_cfg to 4 for CS0, and 0 to CS1. If
+	 * there are two dimms in the controller, set odt_rd_cfg to 3 and
+	 * odt_wr_cfg to 3 for the even CS, 0 for the odd CS.
 	 */
-	popts->cpo_override = 10;
-
-	/*
-	 * Factors to consider for write data delay:
-	 *	- number of DIMMs
-	 *
-	 * 1 = 1/4 clock delay
-	 * 2 = 1/2 clock delay
-	 * 3 = 3/4 clock delay
-	 * 4 = 1   clock delay
-	 * 5 = 5/4 clock delay
-	 * 6 = 3/2 clock delay
-	 */
-	popts->write_data_delay = 3;
+	for (i = 0; i < CONFIG_CHIP_SELECTS_PER_CTRL; i++) {
+		if (i&1) {      /* odd CS */
+			popts->cs_local_opts[i].odt_rd_cfg = 0;
+			popts->cs_local_opts[i].odt_wr_cfg = 0;
+		} else {	/* even CS */
+			if ((CONFIG_DIMM_SLOTS_PER_CTLR == 2) &&
+				(pdimm[i/2].n_ranks != 0)) {
+				popts->cs_local_opts[i].odt_rd_cfg = 3;
+				popts->cs_local_opts[i].odt_wr_cfg = 3;
+			} else {
+				popts->cs_local_opts[i].odt_rd_cfg = 0;
+				popts->cs_local_opts[i].odt_wr_cfg = 4;
+			}
+		}
+	}
 
-	/*
-	 * Factors to consider for half-strength driver enable:
-	 *	- number of DIMMs installed
+	/* Get clk_adjust, cpo, write_data_delay, according to the board ddr
+	 * freqency and n_banks specified in board_specific_parameters table.
 	 */
-	popts->half_strength_driver_enable = 0;
+	ddr_freq = fsl_ddr_get_mem_data_rate() / 1000000;
+	for (j = 0; j < CONFIG_DIMM_SLOTS_PER_CTLR; j++) {
+		if (pdimm[j].n_ranks > 0) {
+			for (i = 0; i < num_params; i++) {
+				if (ddr_freq >= pbsp->datarate_mhz_low &&
+				ddr_freq <= pbsp->datarate_mhz_high &&
+				pdimm[j].n_ranks == pbsp->n_ranks) {
+					popts->clk_adjust = pbsp->clk_adjust;
+					popts->cpo_override = pbsp->cpo;
+					popts->write_data_delay =
+						pbsp->write_data_delay;
+					break;
+				}
+				pbsp++;
+			}
+		}
+	}
+
 }
diff --git a/board/freescale/mpc8641hpcn/law.c b/board/freescale/mpc8641hpcn/law.c
index 2d6c3c175..bd357b866 100644
--- a/board/freescale/mpc8641hpcn/law.c
+++ b/board/freescale/mpc8641hpcn/law.c
@@ -31,34 +31,38 @@
  * LAW(Local Access Window) configuration:
  *
  * 0x0000_0000     0x7fff_ffff     DDR                     2G
+ * if PCI (prepend 0xc_0000_0000 if CONFIG_PHYS_64BIT)
  * 0x8000_0000     0x9fff_ffff     PCI1 MEM                512M
  * 0xa000_0000     0xbfff_ffff     PCI2 MEM                512M
- * 0xc000_0000     0xdfff_ffff     RapidIO                 512M
- * 0xe200_0000     0xe2ff_ffff     PCI1 IO                 16M
- * 0xe300_0000     0xe3ff_ffff     PCI2 IO                 16M
- * 0xf800_0000     0xf80f_ffff     CCSRBAR                 1M
- * 0xf810_0000     0xf81f_ffff     PIXIS                   1M
- * 0xfe00_0000     0xffff_ffff     FLASH (boot bank)       32M
+ * else if RIO (prepend 0xc_0000_0000 if CONFIG_PHYS_64BIT)
+ * 0x8000_0000     0x9fff_ffff     RapidIO                 512M
+ * endif
+ * (prepend 0xf_0000_0000 if CONFIG_PHYS_64BIT)
+ * 0xffc0_0000     0xffc0_ffff     PCI1 IO                 64K
+ * 0xffc1_0000     0xffc1_ffff     PCI2 IO                 64K
+ * 0xffe0_0000     0xffef_ffff     CCSRBAR                 1M
+ * 0xffdf_0000     0xffe0_0000     PIXIS, CF               64K
+ * 0xef80_0000     0xefff_ffff     FLASH (boot bank)       8M
  *
  * Notes:
- *    CCSRBAR don't need a configured Local Access Window.
+ *    CCSRBAR doesn't need a configured Local Access Window.
  *    If flash is 8M at default position (last 8M), no LAW needed.
  */
 
 struct law_entry law_table[] = {
 #if !defined(CONFIG_SPD_EEPROM)
-	SET_LAW(CFG_DDR_SDRAM_BASE, LAW_SIZE_256M, LAW_TRGT_IF_DDR_1),
+	SET_LAW(CONFIG_SYS_DDR_SDRAM_BASE, LAW_SIZE_256M, LAW_TRGT_IF_DDR_1),
 #endif
-	SET_LAW(CFG_PCI1_MEM_BASE, LAW_SIZE_512M, LAW_TRGT_IF_PCI_1),
-	SET_LAW(CFG_PCI2_MEM_BASE, LAW_SIZE_512M, LAW_TRGT_IF_PCI_2),
-	SET_LAW(PIXIS_BASE, LAW_SIZE_2M, LAW_TRGT_IF_LBC),
-	SET_LAW(CFG_PCI1_IO_PHYS, LAW_SIZE_16M, LAW_TRGT_IF_PCI_1),
-	SET_LAW(CFG_PCI2_IO_PHYS, LAW_SIZE_16M, LAW_TRGT_IF_PCI_2),
-	SET_LAW((CFG_FLASH_BASE & 0xfe000000), LAW_SIZE_32M, LAW_TRGT_IF_LBC),
-#if !defined(CONFIG_SPD_EEPROM)
-	SET_LAW(CFG_DDR_SDRAM_BASE, LAW_SIZE_256M, LAW_TRGT_IF_DDR_2),
+#ifdef CONFIG_PCI
+	SET_LAW(CONFIG_SYS_PCI1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI_1),
+	SET_LAW(CONFIG_SYS_PCI2_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI_2),
+	SET_LAW(CONFIG_SYS_PCI1_IO_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_PCI_1),
+	SET_LAW(CONFIG_SYS_PCI2_IO_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_PCI_2),
+#elif defined(CONFIG_RIO)
+	SET_LAW(CONFIG_SYS_RIO_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_RIO),
 #endif
-	SET_LAW(CFG_RIO_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_RIO)
+	SET_LAW(PIXIS_BASE_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_LBC),
+	SET_LAW(CONFIG_SYS_FLASH_BASE_PHYS, LAW_SIZE_8M, LAW_TRGT_IF_LBC),
 };
 
 int num_law_entries = ARRAY_SIZE(law_table);
diff --git a/board/freescale/mpc8641hpcn/mpc8641hpcn.c b/board/freescale/mpc8641hpcn/mpc8641hpcn.c
index 1bb563e41..b83ed6c45 100644
--- a/board/freescale/mpc8641hpcn/mpc8641hpcn.c
+++ b/board/freescale/mpc8641hpcn/mpc8641hpcn.c
@@ -29,14 +29,11 @@
 #include <asm/io.h>
 #include <libfdt.h>
 #include <fdt_support.h>
+#include <netdev.h>
 
 #include "../common/pixis.h"
 
-#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
-extern void ddr_enable_ecc(unsigned int dram_size);
-#endif
-
-long int fixed_sdram(void);
+phys_size_t fixed_sdram(void);
 
 int board_early_init_f(void)
 {
@@ -56,7 +53,7 @@ int checkboard(void)
 phys_size_t
 initdram(int board_type)
 {
-	long dram_size = 0;
+	phys_size_t dram_size = 0;
 
 #if defined(CONFIG_SPD_EEPROM)
 	dram_size = fsl_ddr_sdram();
@@ -64,18 +61,11 @@ initdram(int board_type)
 	dram_size = fixed_sdram();
 #endif
 
-#if defined(CFG_RAMBOOT)
+#if defined(CONFIG_SYS_RAMBOOT)
 	puts("    DDR: ");
 	return dram_size;
 #endif
 
-#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
-	/*
-	 * Initialize and enable DDR ECC.
-	 */
-	ddr_enable_ecc(dram_size);
-#endif
-
 	puts("    DDR: ");
 	return dram_size;
 }
@@ -85,26 +75,26 @@ initdram(int board_type)
 /*
  * Fixed sdram init -- doesn't use serial presence detect.
  */
-long int
+phys_size_t
 fixed_sdram(void)
 {
-#if !defined(CFG_RAMBOOT)
-	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+#if !defined(CONFIG_SYS_RAMBOOT)
+	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
 	volatile ccsr_ddr_t *ddr = &immap->im_ddr1;
 
-	ddr->cs0_bnds = CFG_DDR_CS0_BNDS;
-	ddr->cs0_config = CFG_DDR_CS0_CONFIG;
-	ddr->timing_cfg_3 = CFG_DDR_TIMING_3;
-	ddr->timing_cfg_0 = CFG_DDR_TIMING_0;
-	ddr->timing_cfg_1 = CFG_DDR_TIMING_1;
-	ddr->timing_cfg_2 = CFG_DDR_TIMING_2;
-	ddr->sdram_mode_1 = CFG_DDR_MODE_1;
-	ddr->sdram_mode_2 = CFG_DDR_MODE_2;
-	ddr->sdram_interval = CFG_DDR_INTERVAL;
-	ddr->sdram_data_init = CFG_DDR_DATA_INIT;
-	ddr->sdram_clk_cntl = CFG_DDR_CLK_CTRL;
-	ddr->sdram_ocd_cntl = CFG_DDR_OCD_CTRL;
-	ddr->sdram_ocd_status = CFG_DDR_OCD_STATUS;
+	ddr->cs0_bnds = CONFIG_SYS_DDR_CS0_BNDS;
+	ddr->cs0_config = CONFIG_SYS_DDR_CS0_CONFIG;
+	ddr->timing_cfg_3 = CONFIG_SYS_DDR_TIMING_3;
+	ddr->timing_cfg_0 = CONFIG_SYS_DDR_TIMING_0;
+	ddr->timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1;
+	ddr->timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2;
+	ddr->sdram_mode_1 = CONFIG_SYS_DDR_MODE_1;
+	ddr->sdram_mode_2 = CONFIG_SYS_DDR_MODE_2;
+	ddr->sdram_interval = CONFIG_SYS_DDR_INTERVAL;
+	ddr->sdram_data_init = CONFIG_SYS_DDR_DATA_INIT;
+	ddr->sdram_clk_cntl = CONFIG_SYS_DDR_CLK_CTRL;
+	ddr->sdram_ocd_cntl = CONFIG_SYS_DDR_OCD_CTRL;
+	ddr->sdram_ocd_status = CONFIG_SYS_DDR_OCD_STATUS;
 
 #if defined (CONFIG_DDR_ECC)
 	ddr->err_disable = 0x0000008D;
@@ -116,42 +106,22 @@ fixed_sdram(void)
 
 #if defined (CONFIG_DDR_ECC)
 	/* Enable ECC checking */
-	ddr->sdram_cfg_1 = (CFG_DDR_CONTROL | 0x20000000);
+	ddr->sdram_cfg_1 = (CONFIG_SYS_DDR_CONTROL | 0x20000000);
 #else
-	ddr->sdram_cfg_1 = CFG_DDR_CONTROL;
-	ddr->sdram_cfg_2 = CFG_DDR_CONTROL2;
+	ddr->sdram_cfg_1 = CONFIG_SYS_DDR_CONTROL;
+	ddr->sdram_cfg_2 = CONFIG_SYS_DDR_CONTROL2;
 #endif
 	asm("sync; isync");
 
 	udelay(500);
 #endif
-	return CFG_SDRAM_SIZE * 1024 * 1024;
+	return CONFIG_SYS_SDRAM_SIZE * 1024 * 1024;
 }
 #endif	/* !defined(CONFIG_SPD_EEPROM) */
 
 
 #if defined(CONFIG_PCI)
-/*
- * Initialize PCI Devices, report devices found.
- */
-
-#ifndef CONFIG_PCI_PNP
-static struct pci_config_table pci_fsl86xxads_config_table[] = {
-	{PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
-	 PCI_IDSEL_NUMBER, PCI_ANY_ID,
-	 pci_cfgfunc_config_device, {PCI_ENET0_IOADDR,
-				     PCI_ENET0_MEMADDR,
-				     PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER}},
-	{}
-};
-#endif
-
-
-static struct pci_controller pci1_hose = {
-#ifndef CONFIG_PCI_PNP
-	config_table:pci_mpc86xxcts_config_table
-#endif
-};
+static struct pci_controller pci1_hose;
 #endif /* CONFIG_PCI */
 
 #ifdef CONFIG_PCI2
@@ -160,20 +130,22 @@ static struct pci_controller pci2_hose;
 
 int first_free_busno = 0;
 
+extern int fsl_pci_setup_inbound_windows(struct pci_region *r);
+extern void fsl_pci_init(struct pci_controller *hose);
 
 void pci_init_board(void)
 {
-	volatile immap_t *immap = (immap_t *) CFG_CCSRBAR;
+#ifdef CONFIG_PCI1
+{
+	volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCI1_ADDR;
+	struct pci_controller *hose = &pci1_hose;
+	struct pci_region *r = hose->regions;
+	volatile immap_t *immap = (immap_t *) CONFIG_SYS_CCSRBAR;
 	volatile ccsr_gur_t *gur = &immap->im_gur;
 	uint devdisr = gur->devdisr;
 	uint io_sel = (gur->pordevsr & MPC8641_PORDEVSR_IO_SEL)
 		>> MPC8641_PORDEVSR_IO_SEL_SHIFT;
 
-#ifdef CONFIG_PCI1
-{
-	volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CFG_PCI1_ADDR;
-	extern void fsl_pci_init(struct pci_controller *hose);
-	struct pci_controller *hose = &pci1_hose;
 #ifdef DEBUG
 	uint host1_agent = (gur->porbmsr & MPC8641_PORBMSR_HA)
 		>> MPC8641_PORBMSR_HA_SHIFT;
@@ -192,27 +164,23 @@ void pci_init_board(void)
 		debug("\n");
 
 		/* inbound */
-		pci_set_region(hose->regions + 0,
-			       CFG_PCI_MEMORY_BUS,
-			       CFG_PCI_MEMORY_PHYS,
-			       CFG_PCI_MEMORY_SIZE,
-			       PCI_REGION_MEM | PCI_REGION_MEMORY);
+		r += fsl_pci_setup_inbound_windows(r);
 
 		/* outbound memory */
-		pci_set_region(hose->regions + 1,
-			       CFG_PCI1_MEM_BASE,
-			       CFG_PCI1_MEM_PHYS,
-			       CFG_PCI1_MEM_SIZE,
+		pci_set_region(r++,
+			       CONFIG_SYS_PCI1_MEM_BASE,
+			       CONFIG_SYS_PCI1_MEM_PHYS,
+			       CONFIG_SYS_PCI1_MEM_SIZE,
 			       PCI_REGION_MEM);
 
 		/* outbound io */
-		pci_set_region(hose->regions + 2,
-			       CFG_PCI1_IO_BASE,
-			       CFG_PCI1_IO_PHYS,
-			       CFG_PCI1_IO_SIZE,
+		pci_set_region(r++,
+			       CONFIG_SYS_PCI1_IO_BASE,
+			       CONFIG_SYS_PCI1_IO_PHYS,
+			       CONFIG_SYS_PCI1_IO_SIZE,
 			       PCI_REGION_IO);
 
-		hose->region_count = 3;
+		hose->region_count = r - hose->regions;
 
 		hose->first_busno=first_free_busno;
 		pci_setup_indirect(hose, (int) &pci->cfg_addr, (int) &pci->cfg_data);
@@ -227,8 +195,8 @@ void pci_init_board(void)
 		 * Activate ULI1575 legacy chip by performing a fake
 		 * memory access.  Needed to make ULI RTC work.
 		 */
-		in_be32((unsigned *) ((char *)(CFG_PCI1_MEM_BASE
-				       + CFG_PCI1_MEM_SIZE - 0x1000000)));
+		in_be32((unsigned *) ((char *)(CONFIG_SYS_PCI1_MEM_BASE
+				       + CONFIG_SYS_PCI1_MEM_SIZE - 0x1000000)));
 
 	} else {
 		puts("PCI-EXPRESS 1: Disabled\n");
@@ -240,33 +208,28 @@ void pci_init_board(void)
 
 #ifdef CONFIG_PCI2
 {
-	volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CFG_PCI2_ADDR;
-	extern void fsl_pci_init(struct pci_controller *hose);
+	volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCI2_ADDR;
 	struct pci_controller *hose = &pci2_hose;
-
+	struct pci_region *r = hose->regions;
 
 	/* inbound */
-	pci_set_region(hose->regions + 0,
-		       CFG_PCI_MEMORY_BUS,
-		       CFG_PCI_MEMORY_PHYS,
-		       CFG_PCI_MEMORY_SIZE,
-		       PCI_REGION_MEM | PCI_REGION_MEMORY);
+	r += fsl_pci_setup_inbound_windows(r);
 
 	/* outbound memory */
-	pci_set_region(hose->regions + 1,
-		       CFG_PCI2_MEM_BASE,
-		       CFG_PCI2_MEM_PHYS,
-		       CFG_PCI2_MEM_SIZE,
+	pci_set_region(r++,
+		       CONFIG_SYS_PCI2_MEM_BASE,
+		       CONFIG_SYS_PCI2_MEM_PHYS,
+		       CONFIG_SYS_PCI2_MEM_SIZE,
 		       PCI_REGION_MEM);
 
 	/* outbound io */
-	pci_set_region(hose->regions + 2,
-		       CFG_PCI2_IO_BASE,
-		       CFG_PCI2_IO_PHYS,
-		       CFG_PCI2_IO_SIZE,
+	pci_set_region(r++,
+		       CONFIG_SYS_PCI2_IO_BASE,
+		       CONFIG_SYS_PCI2_IO_PHYS,
+		       CONFIG_SYS_PCI2_IO_SIZE,
 		       PCI_REGION_IO);
 
-	hose->region_count = 3;
+	hose->region_count = r - hose->regions;
 
 	hose->first_busno=first_free_busno;
 	pci_setup_indirect(hose, (int) &pci->cfg_addr, (int) &pci->cfg_data);
@@ -285,32 +248,46 @@ void pci_init_board(void)
 
 
 #if defined(CONFIG_OF_BOARD_SETUP)
+extern void ft_fsl_pci_setup(void *blob, const char *pci_alias,
+			struct pci_controller *hose);
 
 void
 ft_board_setup(void *blob, bd_t *bd)
 {
-	int node, tmp[2];
-	const char *path;
+	int off;
+	u64 *tmp;
+	u32 *addrcells;
 
 	ft_cpu_setup(blob, bd);
 
-	node = fdt_path_offset(blob, "/aliases");
-	tmp[0] = 0;
-	if (node >= 0) {
 #ifdef CONFIG_PCI1
-		path = fdt_getprop(blob, node, "pci0", NULL);
-		if (path) {
-			tmp[1] = pci1_hose.last_busno - pci1_hose.first_busno;
-			do_fixup_by_path(blob, path, "bus-range", &tmp, 8, 1);
-		}
+	ft_fsl_pci_setup(blob, "pci0", &pci1_hose);
 #endif
 #ifdef CONFIG_PCI2
-		path = fdt_getprop(blob, node, "pci1", NULL);
-		if (path) {
-			tmp[1] = pci2_hose.last_busno - pci2_hose.first_busno;
-			do_fixup_by_path(blob, path, "bus-range", &tmp, 8, 1);
-		}
+	ft_fsl_pci_setup(blob, "pci1", &pci2_hose);
 #endif
+
+	/*
+	 * Warn if it looks like the device tree doesn't match u-boot.
+	 * This is just an estimation, based on the location of CCSR,
+	 * which is defined by the "reg" property in the soc node.
+	 */
+	off = fdt_path_offset(blob, "/soc8641");
+	addrcells = (u32 *)fdt_getprop(blob, 0, "#address-cells", NULL);
+	tmp = (u64 *)fdt_getprop(blob, off, "reg", NULL);
+
+	if (tmp) {
+		u64 addr;
+		if (addrcells && (*addrcells == 1))
+			addr = *(u32 *)tmp;
+		else
+			addr = *tmp;
+
+		if (addr != CONFIG_SYS_CCSRBAR_PHYS)
+			printf("WARNING: The CCSRBAR address in your .dts "
+			       "does not match the address of the CCSR "
+			       "in u-boot.  This means your .dts might "
+			       "be old.\n");
 	}
 }
 #endif
@@ -379,3 +356,10 @@ get_board_sys_clk(ulong dummy)
 
 	return val;
 }
+
+int board_eth_init(bd_t *bis)
+{
+	/* Initialize TSECs */
+	cpu_eth_init(bis);
+	return pci_eth_init(bis);
+}
diff --git a/board/freescale/mpc8641hpcn/u-boot.lds b/board/freescale/mpc8641hpcn/u-boot.lds
index 4f884f987..6c9da1f32 100644
--- a/board/freescale/mpc8641hpcn/u-boot.lds
+++ b/board/freescale/mpc8641hpcn/u-boot.lds
@@ -129,6 +129,7 @@ SECTIONS
    *(.dynbss)
    *(.bss)
    *(COMMON)
+   . = ALIGN(4);
   }
   _end = . ;
   PROVIDE (end = .);
diff --git a/board/freescale/mx31ads/u-boot.lds b/board/freescale/mx31ads/u-boot.lds
index c379460c9..e682f307f 100644
--- a/board/freescale/mx31ads/u-boot.lds
+++ b/board/freescale/mx31ads/u-boot.lds
@@ -44,7 +44,7 @@ SECTIONS
 	  drivers/mtd/libmtd.a			(.text)
 
 	  . = DEFINED(env_offset) ? env_offset : .;
-	  common/environment.o(.text)
+	  common/env_embedded.o(.text)
 
 	  *(.text)
 	}
@@ -65,6 +65,6 @@ SECTIONS
 
 	. = ALIGN(4);
 	__bss_start = .;
-	.bss : { *(.bss) }
+	.bss : { *(.bss) . = ALIGN(4); }
 	_end = .;
 }
diff --git a/board/funkwerk/vovpn-gw/flash.c b/board/funkwerk/vovpn-gw/flash.c
index 7dd0d3f23..fd3b16ea5 100644
--- a/board/funkwerk/vovpn-gw/flash.c
+++ b/board/funkwerk/vovpn-gw/flash.c
@@ -27,7 +27,7 @@
 
 #include <common.h>
 
-flash_info_t				flash_info[CFG_MAX_FLASH_BANKS];
+flash_info_t				flash_info[CONFIG_SYS_MAX_FLASH_BANKS];
 
 #define FLASH_CMD_READ_ID		0x90
 #define FLASH_CMD_READ_STATUS		0x70
@@ -46,7 +46,7 @@ flash_info_t				flash_info[CFG_MAX_FLASH_BANKS];
 
 #define FLASH_WRITE_BUFFER_SIZE		32
 
-#ifdef CFG_FLASH_16BIT
+#ifdef CONFIG_SYS_FLASH_16BIT
 #define FLASH_WORD_SIZE			unsigned short
 #define FLASH_ID_MASK			0xffff
 #define FLASH_CMD_ADDR_SHIFT		0
@@ -130,10 +130,10 @@ flash_init(void)
 	unsigned long	size;
 	int		i;
 
-	for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) {
+	for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
 		flash_info[i].flash_id = FLASH_UNKNOWN;
 	}
-	size = flash_get((volatile FLASH_WORD_SIZE *)CFG_FLASH_BASE, &flash_info[0]);
+	size = flash_get((volatile FLASH_WORD_SIZE *)CONFIG_SYS_FLASH_BASE, &flash_info[0]);
 	if (flash_info[0].flash_id == FLASH_UNKNOWN) {
 		printf ("## Unknown FLASH Size=0x%08lx\n", size);
 		return (0);
@@ -145,16 +145,16 @@ flash_init(void)
 		      flash_info[0].start[1] - 1,
 		      &flash_info[0]);
 
-#if CFG_MONITOR_BASE >= CFG_FLASH_BASE
+#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE
 	flash_protect(FLAG_PROTECT_SET,
-		      CFG_MONITOR_FLASH,
-		      CFG_MONITOR_FLASH+CFG_MONITOR_LEN-1,
+		      CONFIG_SYS_MONITOR_FLASH,
+		      CONFIG_SYS_MONITOR_FLASH+CONFIG_SYS_MONITOR_LEN-1,
 		      &flash_info[0]);
 #endif
-#ifdef	CFG_ENV_IS_IN_FLASH
+#ifdef	CONFIG_ENV_IS_IN_FLASH
 	flash_protect(FLAG_PROTECT_SET,
-		      CFG_ENV_ADDR,
-		      CFG_ENV_ADDR+CFG_ENV_SECT_SIZE-1,
+		      CONFIG_ENV_ADDR,
+		      CONFIG_ENV_ADDR+CONFIG_ENV_SECT_SIZE-1,
 		      &flash_info[0]);
 #endif
 	return (size);
@@ -265,7 +265,7 @@ flash_erase(flash_info_t *info, int s_first, int s_last)
 		udelay (1000);
 
 		while (((status = *addr) & FLASH_STATUS_DONE) != FLASH_STATUS_DONE) {
-			if ((now=get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+			if ((now=get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
 				printf("Flash erase timeout at address %lx\n", info->start[sect]);
 				*addr = FLASH_CMD_SUSPEND_ERASE;
 				*addr = FLASH_CMD_RESET;
@@ -307,7 +307,7 @@ write_buff2( volatile FLASH_WORD_SIZE *dst,
 			enable_interrupts();
 		}
 
-		if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+		if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
 			return (-1);
 		}
 	}
@@ -337,7 +337,7 @@ poll_status( volatile FLASH_WORD_SIZE *addr )
 				break;
 			}
 		}
-		if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+		if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
 			*addr = FLASH_CMD_RESET;
 			return (-1);
 		}
@@ -367,7 +367,7 @@ write_buff(flash_info_t *info, uchar *src, ulong udst, ulong cnt)
 	addr = (volatile FLASH_WORD_SIZE *)(info->start[0]);
 	dst = (volatile FLASH_WORD_SIZE *) udst;
 
-#ifdef CFG_FLASH_16BIT
+#ifdef CONFIG_SYS_FLASH_16BIT
 #error NYI
 #else
 	while (cnt > 0) {
@@ -435,7 +435,7 @@ flash_real_protect(flash_info_t *info, long sector, int prot)
 	/* wait for error or finish */
 	start = get_timer (0);
 	while(!(addr[0] & FLASH_STATUS_DONE)){
-		if (get_timer(start) > CFG_FLASH_ERASE_TOUT) {
+		if (get_timer(start) > CONFIG_SYS_FLASH_ERASE_TOUT) {
 			printf("Flash protect timeout at address %lx\n",  info->start[sector]);
 			addr[0] = FLASH_CMD_RESET;
 			return (1);
diff --git a/board/funkwerk/vovpn-gw/vovpn-gw.c b/board/funkwerk/vovpn-gw/vovpn-gw.c
index 1c3f627a4..8c4abdd37 100644
--- a/board/funkwerk/vovpn-gw/vovpn-gw.c
+++ b/board/funkwerk/vovpn-gw/vovpn-gw.c
@@ -189,7 +189,7 @@ void reset_phy (void)
 	unsigned short val;
 #endif
 
-	iop = ioport_addr((immap_t *)CFG_IMMR, 0);
+	iop = ioport_addr((immap_t *)CONFIG_SYS_IMMR, 0);
 
 	/* Reset the PHY */
 	iop->pdat &= 0xfff7ffff;	/* PA12 = |SWITCH_RESET */
@@ -198,12 +198,12 @@ void reset_phy (void)
 	iop->pdat |= 0x00080000;
 	for (i=0; i<100; i++) {
 		udelay(20000);
-		if (bb_miiphy_read("FCC1 ETHERNET", CFG_PHY_ADDR,2,&val ) == 0) {
+		if (bb_miiphy_read("FCC1 ETHERNET", CONFIG_SYS_PHY_ADDR,2,&val ) == 0) {
 			break;
 		}
 	}
 	/* initialize switch */
-	m88e6060_initialize( CFG_PHY_ADDR );
+	m88e6060_initialize( CONFIG_SYS_PHY_ADDR );
 #endif
 }
 
@@ -233,7 +233,7 @@ int board_early_init_f (void)
 	volatile unsigned char *dummy;
 	int i;
 
-	immap = (immap_t *) CFG_IMMR;
+	immap = (immap_t *) CONFIG_SYS_IMMR;
 	memctl = &immap->im_memctl;
 
 #if 0
@@ -272,7 +272,7 @@ int misc_init_r (void)
 	unsigned char c;
 	int i;
 
-	immap = (immap_t *) CFG_IMMR;
+	immap = (immap_t *) CONFIG_SYS_IMMR;
 	memctl = &immap->im_memctl;
 
 
@@ -289,7 +289,7 @@ int misc_init_r (void)
 	memctl->memc_mamr = 0x00044440;
 #endif
 	/* enable buffers (DSP, DPRAM) */
-	iop = ioport_addr((immap_t *)CFG_IMMR, 0);
+	iop = ioport_addr((immap_t *)CONFIG_SYS_IMMR, 0);
 	iop->pdat &= 0xfffbffff;	/* PA13 = |EN_M_BCTL1 */
 
 	/* destroy DPRAM magic */
@@ -310,7 +310,7 @@ do_reset (void *cmdtp, int flag, int argc, char *argv[])
 {
 	volatile ioport_t *iop;
 
-	iop = ioport_addr((immap_t *)CFG_IMMR, 2);
+	iop = ioport_addr((immap_t *)CONFIG_SYS_IMMR, 2);
 	iop->pdat |= 0x00002000;	/* PC18 = HW_RESET */
 	return 1;
 }
@@ -320,16 +320,16 @@ do_reset (void *cmdtp, int flag, int argc, char *argv[])
 
 phys_size_t initdram (int board_type)
 {
-#ifndef CFG_RAMBOOT
+#ifndef CONFIG_SYS_RAMBOOT
 	volatile immap_t *immap;
 	volatile memctl8260_t *memctl;
 	volatile uchar *ramaddr;
 	int i;
 	uchar c;
 
-	immap = (immap_t *) CFG_IMMR;
+	immap = (immap_t *) CONFIG_SYS_IMMR;
 	memctl = &immap->im_memctl;
-	ramaddr = (uchar *) CFG_SDRAM_BASE;
+	ramaddr = (uchar *) CONFIG_SYS_SDRAM_BASE;
 	c = 0xff;
 
 	immap->im_siu_conf.sc_ppc_acr  = 0x02;
@@ -338,30 +338,30 @@ phys_size_t initdram (int board_type)
 	immap->im_siu_conf.sc_tescr1   = 0x00000000;
 	immap->im_siu_conf.sc_tescr2   = 0x00000000;
 
-	memctl->memc_mptpr = CFG_MPTPR;
-	memctl->memc_psrt = CFG_PSRT;
-	memctl->memc_or1 = CFG_OR1_PRELIM;
-	memctl->memc_br1 = CFG_SDRAM_BASE | CFG_BR1_PRELIM;
+	memctl->memc_mptpr = CONFIG_SYS_MPTPR;
+	memctl->memc_psrt = CONFIG_SYS_PSRT;
+	memctl->memc_or1 = CONFIG_SYS_OR1_PRELIM;
+	memctl->memc_br1 = CONFIG_SYS_SDRAM_BASE | CONFIG_SYS_BR1_PRELIM;
 
 	/* Precharge all banks */
-	memctl->memc_psdmr = CFG_PSDMR | 0x28000000;
+	memctl->memc_psdmr = CONFIG_SYS_PSDMR | 0x28000000;
 	*ramaddr = c;
 
 	/* CBR refresh */
-	memctl->memc_psdmr = CFG_PSDMR | 0x08000000;
+	memctl->memc_psdmr = CONFIG_SYS_PSDMR | 0x08000000;
 	for (i = 0; i < 8; i++)
 		*ramaddr = c;
 
 	/* Mode Register write */
-	memctl->memc_psdmr = CFG_PSDMR | 0x18000000;
+	memctl->memc_psdmr = CONFIG_SYS_PSDMR | 0x18000000;
 	*ramaddr = c;
 
 	/* Refresh enable */
-	memctl->memc_psdmr = CFG_PSDMR | 0x40000000;
+	memctl->memc_psdmr = CONFIG_SYS_PSDMR | 0x40000000;
 	*ramaddr = c;
-#endif /* CFG_RAMBOOT */
+#endif /* CONFIG_SYS_RAMBOOT */
 
-	return (CFG_SDRAM_SIZE);
+	return (CONFIG_SYS_SDRAM_SIZE);
 }
 
 int checkboard (void)
diff --git a/board/g2000/g2000.c b/board/g2000/g2000.c
index 647f4b705..48fc643dc 100644
--- a/board/g2000/g2000.c
+++ b/board/g2000/g2000.c
@@ -33,7 +33,7 @@
 #define MEM_SDTR1_INIT_VAL      0x00854005
 #define SDRAM0_CFG_ENABLE       0x80000000
 
-#define CFG_SDRAM_SIZE          0x04000000      /* 64 MB */
+#define CONFIG_SYS_SDRAM_SIZE          0x04000000      /* 64 MB */
 
 int board_early_init_f (void)
 {
@@ -77,8 +77,8 @@ int misc_init_r (void)
 	/*
 	 * Set NAND-FLASH GPIO signals to default
 	 */
-	out32(GPIO0_OR, in32(GPIO0_OR) & ~(CFG_NAND_CLE | CFG_NAND_ALE));
-	out32(GPIO0_OR, in32(GPIO0_OR) | CFG_NAND_CE);
+	out32(GPIO0_OR, in32(GPIO0_OR) & ~(CONFIG_SYS_NAND_CLE | CONFIG_SYS_NAND_ALE));
+	out32(GPIO0_OR, in32(GPIO0_OR) | CONFIG_SYS_NAND_CE);
 #endif
 
 	return (0);
@@ -127,7 +127,7 @@ long int init_sdram_static_settings(void)
 	udelay(500);
 	mtsdram0( mem_mcopt1, MEM_MCOPT1_INIT_VAL|SDRAM0_CFG_ENABLE );
 
-	return (CFG_SDRAM_SIZE); /* CFG_SDRAM_SIZE is in G2000.h */
+	return (CONFIG_SYS_SDRAM_SIZE); /* CONFIG_SYS_SDRAM_SIZE is in G2000.h */
  }
 
 
@@ -151,11 +151,11 @@ phys_size_t initdram (int board_type)
 
 #if defined(CONFIG_CMD_NAND)
 #include <linux/mtd/nand_legacy.h>
-extern struct nand_chip nand_dev_desc[CFG_MAX_NAND_DEVICE];
+extern struct nand_chip nand_dev_desc[CONFIG_SYS_MAX_NAND_DEVICE];
 
 void nand_init(void)
 {
-	nand_probe(CFG_NAND_BASE);
+	nand_probe(CONFIG_SYS_NAND_BASE);
 	if (nand_dev_desc[0].ChipID != NAND_ChipID_UNKNOWN) {
 		print_size(nand_dev_desc[0].totlen, "\n");
 	}
diff --git a/board/g2000/strataflash.c b/board/g2000/strataflash.c
index 8446e0210..effe65a36 100644
--- a/board/g2000/strataflash.c
+++ b/board/g2000/strataflash.c
@@ -101,7 +101,7 @@ typedef union {
 
 #define NUM_ERASE_REGIONS 4
 
-flash_info_t	flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips	*/
+flash_info_t	flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips	*/
 
 /*-----------------------------------------------------------------------
  * Functions
@@ -116,7 +116,7 @@ static int flash_detect_cfi(flash_info_t * info);
 static ulong flash_get_size (ulong base, int banknum);
 static int flash_write_cfiword (flash_info_t *info, ulong dest, cfiword_t cword);
 static int flash_full_status_check(flash_info_t * info, ulong sector, ulong tout, char * prompt);
-#ifdef CFG_FLASH_USE_BUFFER_WRITE
+#ifdef CONFIG_SYS_FLASH_USE_BUFFER_WRITE
 static int flash_write_cfibuffer(flash_info_t * info, ulong dest, uchar * cp, int len);
 #endif
 /*-----------------------------------------------------------------------
@@ -176,14 +176,14 @@ unsigned long flash_init (void)
 	 *
 	 */
 
-	address = CFG_FLASH_BASE;
+	address = CONFIG_SYS_FLASH_BASE;
 	size = 0;
 
 	/* Init: no FLASHes known */
-	for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) {
+	for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
 		flash_info[i].flash_id = FLASH_UNKNOWN;
 		size += flash_info[i].size = flash_get_size(address, i);
-		address += CFG_FLASH_INCREMENT;
+		address += CONFIG_SYS_FLASH_INCREMENT;
 		if (flash_info[0].flash_id == FLASH_UNKNOWN) {
 			printf ("## Unknown FLASH on Bank %d - Size = 0x%08lx = %ld MB\n",i,
 				flash_info[0].size, flash_info[i].size<<20);
@@ -192,14 +192,14 @@ unsigned long flash_init (void)
 
 #if 0 /* test-only */
 	/* Monitor protection ON by default */
-#if (CFG_MONITOR_BASE >= CFG_FLASH_BASE)
-	for(i=0; flash_info[0].start[i] < CFG_MONITOR_BASE+CFG_MONITOR_LEN-1; i++)
+#if (CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE)
+	for(i=0; flash_info[0].start[i] < CONFIG_SYS_MONITOR_BASE+CONFIG_SYS_MONITOR_LEN-1; i++)
 		(void)flash_real_protect(&flash_info[0], i, 1);
 #endif
 #else
 	/* monitor protection ON by default */
 	flash_protect (FLAG_PROTECT_SET,
-		       - CFG_MONITOR_LEN,
+		       - CONFIG_SYS_MONITOR_LEN,
 		       - 1, &flash_info[1]);
 #endif
 
@@ -273,7 +273,7 @@ void flash_print_info  (flash_info_t *info)
 
 	printf ("  Sector Start Addresses:");
 	for (i=0; i<info->sector_count; ++i) {
-#ifdef CFG_FLASH_EMPTY_INFO
+#ifdef CONFIG_SYS_FLASH_EMPTY_INFO
 		int k;
 		int size;
 		int erased;
@@ -353,7 +353,7 @@ int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
 		wp = cp;
 	}
 
-#ifdef CFG_FLASH_USE_BUFFER_WRITE
+#ifdef CONFIG_SYS_FLASH_USE_BUFFER_WRITE
 	while(cnt >= info->portwidth) {
 		i = info->buffer_size > cnt? cnt: info->buffer_size;
 		if((rc = flash_write_cfibuffer(info, wp, src,i)) != ERR_OK)
@@ -374,7 +374,7 @@ int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
 		wp += info->portwidth;
 		cnt -= info->portwidth;
 	}
-#endif /* CFG_FLASH_USE_BUFFER_WRITE */
+#endif /* CONFIG_SYS_FLASH_USE_BUFFER_WRITE */
 	if (cnt == 0) {
 		return (0);
 	}
@@ -716,7 +716,7 @@ static int flash_write_cfiword (flash_info_t *info, ulong dest, cfiword_t cword)
 	return flash_full_status_check(info, 0, info->write_tout, "write");
 }
 
-#ifdef CFG_FLASH_USE_BUFFER_WRITE
+#ifdef CONFIG_SYS_FLASH_USE_BUFFER_WRITE
 
 /* loop through the sectors from the highest address
  * when the passed address is greater or equal to the sector address
@@ -790,4 +790,4 @@ static int flash_write_cfibuffer(flash_info_t * info, ulong dest, uchar * cp, in
 	flash_write_cmd(info, sector, 0, FLASH_CMD_CLEAR_STATUS);
 	return retcode;
 }
-#endif /* CFG_USE_FLASH_BUFFER_WRITE */
+#endif /* CONFIG_SYS_USE_FLASH_BUFFER_WRITE */
diff --git a/board/g2000/u-boot.lds b/board/g2000/u-boot.lds
index d70d37934..d8fbea396 100644
--- a/board/g2000/u-boot.lds
+++ b/board/g2000/u-boot.lds
@@ -66,14 +66,14 @@ SECTIONS
     cpu/ppc4xx/4xx_uart.o	(.text)
     cpu/ppc4xx/cpu_init.o	(.text)
     cpu/ppc4xx/speed.o	(.text)
-    cpu/ppc4xx/4xx_enet.o	(.text)
+    drivers/net/4xx_enet.o	(.text)
     common/dlmalloc.o	(.text)
     lib_generic/crc32.o		(.text)
     lib_ppc/extable.o	(.text)
     lib_generic/zlib.o		(.text)
 
 /*    . = env_offset;*/
-/*    common/environment.o(.text)*/
+/*    common/env_embedded.o(.text)*/
 
     *(.text)
     *(.fixup)
@@ -144,6 +144,7 @@ SECTIONS
    *(.dynbss)
    *(.bss)
    *(COMMON)
+   . = ALIGN(4);
   }
   _end = . ;
   PROVIDE (end = .);
diff --git a/board/gaisler/gr_cpci_ax2000/u-boot.lds b/board/gaisler/gr_cpci_ax2000/u-boot.lds
index 3958670bb..a0876310c 100644
--- a/board/gaisler/gr_cpci_ax2000/u-boot.lds
+++ b/board/gaisler/gr_cpci_ax2000/u-boot.lds
@@ -61,7 +61,7 @@ SECTIONS
 
 		*(.start)
 		cpu/leon3/start.o (.text)
-/* 8k is the same as the PROM offset from end of main memory, (CFG_PROM_SIZE) */
+/* 8k is the same as the PROM offset from end of main memory, (CONFIG_SYS_PROM_SIZE) */
 		. = ALIGN(8192);
 /* PROM CODE, Will be relocated to the end of memory,
  * no global data accesses please.
diff --git a/board/gaisler/gr_ep2s60/u-boot.lds b/board/gaisler/gr_ep2s60/u-boot.lds
index 100350d7a..e461a36fa 100644
--- a/board/gaisler/gr_ep2s60/u-boot.lds
+++ b/board/gaisler/gr_ep2s60/u-boot.lds
@@ -61,7 +61,7 @@ SECTIONS
 
 		*(.start)
 		cpu/leon3/start.o (.text)
-/* 8k is the same as the PROM offset from end of main memory, (CFG_PROM_SIZE) */
+/* 8k is the same as the PROM offset from end of main memory, (CONFIG_SYS_PROM_SIZE) */
 		. = ALIGN(8192);
 /* PROM CODE, Will be relocated to the end of memory,
  * no global data accesses please.
diff --git a/board/gaisler/gr_xc3s_1500/u-boot.lds b/board/gaisler/gr_xc3s_1500/u-boot.lds
index 3848c684a..ddd27d455 100644
--- a/board/gaisler/gr_xc3s_1500/u-boot.lds
+++ b/board/gaisler/gr_xc3s_1500/u-boot.lds
@@ -61,7 +61,7 @@ SECTIONS
 
 		*(.start)
 		cpu/leon3/start.o (.text)
-/* 8k is the same as the PROM offset from end of main memory, (CFG_PROM_SIZE) */
+/* 8k is the same as the PROM offset from end of main memory, (CONFIG_SYS_PROM_SIZE) */
 		. = ALIGN(8192);
 /* PROM CODE, Will be relocated to the end of memory,
  * no global data accesses please.
diff --git a/board/gaisler/grsim/u-boot.lds b/board/gaisler/grsim/u-boot.lds
index 1e8bb6957..a9cc7ca4b 100644
--- a/board/gaisler/grsim/u-boot.lds
+++ b/board/gaisler/grsim/u-boot.lds
@@ -60,7 +60,7 @@ SECTIONS
 
 		*(.start)
 		cpu/leon3/start.o (.text)
-/* 8k is the same as the PROM offset from end of main memory, (CFG_PROM_SIZE) */
+/* 8k is the same as the PROM offset from end of main memory, (CONFIG_SYS_PROM_SIZE) */
 		. = ALIGN(8192);
 /* PROM CODE, Will be relocated to the end of memory,
  * no global data accesses please.
diff --git a/board/gaisler/grsim_leon2/u-boot.lds b/board/gaisler/grsim_leon2/u-boot.lds
index 2a22082a8..b3462d463 100644
--- a/board/gaisler/grsim_leon2/u-boot.lds
+++ b/board/gaisler/grsim_leon2/u-boot.lds
@@ -60,7 +60,7 @@ SECTIONS
 
 		*(.start)
 		cpu/leon2/start.o (.text)
-/* 8k is the same as the PROM offset from end of main memory, (CFG_PROM_SIZE) */
+/* 8k is the same as the PROM offset from end of main memory, (CONFIG_SYS_PROM_SIZE) */
 		. = ALIGN(8192);
 /* PROM CODE, Will be relocated to the end of memory,
  * no global data accesses please.
diff --git a/board/gcplus/flash.c b/board/gcplus/flash.c
index 36d7363a8..8511582ba 100644
--- a/board/gcplus/flash.c
+++ b/board/gcplus/flash.c
@@ -29,7 +29,7 @@
 #include <common.h>
 #include <linux/byteorder/swab.h>
 
-flash_info_t flash_info[CFG_MAX_FLASH_BANKS];	/* info for FLASH chips */
+flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];	/* info for FLASH chips */
 
 /* Board support for 1 or 2 flash devices */
 #define FLASH_PORT_WIDTH32
@@ -67,7 +67,7 @@ flash_init(void)
 	int i;
 	ulong size = 0;
 
-	for (i = 0; i < CFG_MAX_FLASH_BANKS; i++) {
+	for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) {
 		switch (i) {
 		case 0:
 			flash_get_size((FPW *) PHYS_FLASH_1, &flash_info[i]);
@@ -83,12 +83,12 @@ flash_init(void)
 	/* Protect monitor and environment sectors
 	 */
 	flash_protect(FLAG_PROTECT_SET,
-		      CFG_FLASH_BASE,
-		      CFG_FLASH_BASE + monitor_flash_len - 1, &flash_info[0]);
+		      CONFIG_SYS_FLASH_BASE,
+		      CONFIG_SYS_FLASH_BASE + monitor_flash_len - 1, &flash_info[0]);
 
 	flash_protect(FLAG_PROTECT_SET,
-		      CFG_ENV_ADDR,
-		      CFG_ENV_ADDR + CFG_ENV_SIZE - 1, &flash_info[0]);
+		      CONFIG_ENV_ADDR,
+		      CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1, &flash_info[0]);
 
 	return size;
 }
@@ -207,10 +207,10 @@ flash_get_size(FPW * addr, flash_info_t * info)
 		break;
 	}
 
-	if (info->sector_count > CFG_MAX_FLASH_SECT) {
+	if (info->sector_count > CONFIG_SYS_MAX_FLASH_SECT) {
 		printf("** ERROR: sector count %d > max (%d) **\n",
-		       info->sector_count, CFG_MAX_FLASH_SECT);
-		info->sector_count = CFG_MAX_FLASH_SECT;
+		       info->sector_count, CONFIG_SYS_MAX_FLASH_SECT);
+		info->sector_count = CONFIG_SYS_MAX_FLASH_SECT;
 	}
 
 	addr[0] = (FPW) 0x00FF00FF;	/* restore read mode */
@@ -282,7 +282,7 @@ flash_erase(flash_info_t * info, int s_first, int s_last)
 			while (((status =
 				 *addr) & (FPW) 0x00800080) !=
 			       (FPW) 0x00800080) {
-				if (get_timer_masked() > CFG_FLASH_ERASE_TOUT) {
+				if (get_timer_masked() > CONFIG_SYS_FLASH_ERASE_TOUT) {
 					printf("Timeout\n");
 					*addr = (FPW) 0x00B000B0;	/* suspend erase         */
 					*addr = (FPW) 0x00FF00FF;	/* reset to read mode */
@@ -418,7 +418,7 @@ write_data(flash_info_t * info, ulong dest, FPW data)
 
 	/* wait while polling the status register */
 	while (((status = *addr) & (FPW) 0x00800080) != (FPW) 0x00800080) {
-		if (get_timer_masked() > CFG_FLASH_WRITE_TOUT) {
+		if (get_timer_masked() > CONFIG_SYS_FLASH_WRITE_TOUT) {
 			*addr = (FPW) 0x00FF00FF;	/* restore read mode */
 			return (1);
 		}
diff --git a/board/gcplus/u-boot.lds b/board/gcplus/u-boot.lds
index 5ab680181..ab7f76bcb 100644
--- a/board/gcplus/u-boot.lds
+++ b/board/gcplus/u-boot.lds
@@ -53,6 +53,6 @@ SECTIONS
 
 	. = ALIGN(4);
 	__bss_start = .;
-	.bss (NOLOAD) : { *(.bss) }
+	.bss (NOLOAD) : { *(.bss) . = ALIGN(4); }
 	_end = .;
 }
diff --git a/board/xilinx/xupv2p/Makefile b/board/gdsys/neo/Makefile
index 10b47b2ae..1270feafc 100644
--- a/board/xilinx/xupv2p/Makefile
+++ b/board/gdsys/neo/Makefile
@@ -1,6 +1,6 @@
 #
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+# (C) Copyright 2007
+# Stefan Roese, DENX Software Engineering, sr@denx.de.
 #
 # See file CREDITS for list of people who contributed to this
 # project.
@@ -26,13 +26,14 @@ include $(TOPDIR)/config.mk
 LIB	= $(obj)lib$(BOARD).a
 
 COBJS	= $(BOARD).o
+SOBJS   =
 
 SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
 OBJS	:= $(addprefix $(obj),$(COBJS))
 SOBJS	:= $(addprefix $(obj),$(SOBJS))
 
 $(LIB):	$(OBJS) $(SOBJS)
-	$(AR) $(ARFLAGS) $@ $^
+	$(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
 
 clean:
 	rm -f $(SOBJS) $(OBJS)
diff --git a/board/gdsys/neo/config.mk b/board/gdsys/neo/config.mk
new file mode 100644
index 000000000..1bdf5e4fc
--- /dev/null
+++ b/board/gdsys/neo/config.mk
@@ -0,0 +1,24 @@
+#
+# (C) Copyright 2000
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+TEXT_BASE = 0xFFFC0000
diff --git a/board/gdsys/neo/neo.c b/board/gdsys/neo/neo.c
new file mode 100644
index 000000000..817ce17ff
--- /dev/null
+++ b/board/gdsys/neo/neo.c
@@ -0,0 +1,101 @@
+/*
+ * (C) Copyright 2007-2008
+ * Dirk Eibach,  Guntermann & Drunck GmbH, eibach@gdsys.de
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <command.h>
+#include <asm/processor.h>
+#include <asm/io.h>
+
+#define HWTYPE_CCX16	1
+#define HWREV_300	3
+
+int board_early_init_f(void)
+{
+	mtdcr(uicsr, 0xFFFFFFFF);	/* clear all ints */
+	mtdcr(uicer, 0x00000000);	/* disable all ints */
+	mtdcr(uiccr, 0x00000000);	/* set all to be non-critical */
+	mtdcr(uicpr, 0xFFFFFF80);	/* set int polarities */
+	mtdcr(uictr, 0x10000000);	/* set int trigger levels */
+	mtdcr(uicvcr, 0x00000001);	/* set vect base=0,INT0 highest prio */
+	mtdcr(uicsr, 0xFFFFFFFF);	/* clear all ints */
+
+	/*
+	 * EBC Configuration Register: set ready timeout to 512 ebc-clks
+	 * -> ca. 15 us
+	 */
+	mtebc(epcr, 0xa8400000);	/* ebc always driven */
+
+	return 0;
+}
+
+/*
+ * Check Board Identity:
+ */
+int checkboard(void)
+{
+	char *s = getenv("serial#");
+	u16 val = in_le16((void *)CONFIG_FPGA_BASE + 2);
+	u8 unit_type;
+	u8 hardware_cpu_ports;
+	u8 hardware_con_ports;
+	u8 hardware_version;
+
+	printf("Board: CATCenter Neo");
+
+	if (s != NULL) {
+		puts(", serial# ");
+		puts(s);
+	}
+	puts("\n       ");
+
+	unit_type = (val & 0xf000) >> 12;
+	hardware_cpu_ports = ((val & 0x0f00) >> 8) * 8;
+	hardware_con_ports = ((val & 0x00f0) >> 4) * 2;
+	hardware_version = val & 0x000f;
+
+	switch (unit_type) {
+	case HWTYPE_CCX16:
+		printf("CCX16-FPGA (80 UARTs)");
+		break;
+
+	default:
+		printf("UnitType %d, unsupported", unit_type);
+		break;
+	}
+
+	printf(", %d cpu ports, %d console ports,",
+	       hardware_cpu_ports, hardware_con_ports);
+
+	switch (hardware_version) {
+	case HWREV_300:
+		printf(" HW-Ver 3.00\n");
+		break;
+
+	default:
+		printf(" HW-Ver %d, unsupported\n",
+		       hardware_version);
+		break;
+	}
+
+	return 0;
+}
diff --git a/board/gdsys/neo/u-boot.lds b/board/gdsys/neo/u-boot.lds
new file mode 100644
index 000000000..d803625b5
--- /dev/null
+++ b/board/gdsys/neo/u-boot.lds
@@ -0,0 +1,132 @@
+/*
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(powerpc)
+/* Do we need any of these for elf?
+   __DYNAMIC = 0;    */
+SECTIONS
+{
+  .resetvec 0xFFFFFFFC :
+  {
+    *(.resetvec)
+  } = 0xffff
+
+  /* Read-only sections, merged into text segment: */
+  . = + SIZEOF_HEADERS;
+  .interp : { *(.interp) }
+  .hash          : { *(.hash)		}
+  .dynsym        : { *(.dynsym)		}
+  .dynstr        : { *(.dynstr)		}
+  .rel.text      : { *(.rel.text)		}
+  .rela.text     : { *(.rela.text)	}
+  .rel.data      : { *(.rel.data)		}
+  .rela.data     : { *(.rela.data)	}
+  .rel.rodata    : { *(.rel.rodata)	}
+  .rela.rodata   : { *(.rela.rodata)	}
+  .rel.got       : { *(.rel.got)		}
+  .rela.got      : { *(.rela.got)		}
+  .rel.ctors     : { *(.rel.ctors)	}
+  .rela.ctors    : { *(.rela.ctors)	}
+  .rel.dtors     : { *(.rel.dtors)	}
+  .rela.dtors    : { *(.rela.dtors)	}
+  .rel.bss       : { *(.rel.bss)		}
+  .rela.bss      : { *(.rela.bss)		}
+  .rel.plt       : { *(.rel.plt)		}
+  .rela.plt      : { *(.rela.plt)		}
+  .init          : { *(.init)	}
+  .plt : { *(.plt) }
+  .text      :
+  {
+    cpu/ppc4xx/start.o	(.text)
+
+    *(.text)
+    *(.fixup)
+    *(.got1)
+  }
+  _etext = .;
+  PROVIDE (etext = .);
+  .rodata    :
+  {
+    *(.rodata)
+    *(.rodata1)
+    *(.rodata.str1.4)
+  }
+  .fini      : { *(.fini)    } =0
+  .ctors     : { *(.ctors)   }
+  .dtors     : { *(.dtors)   }
+
+  /* Read-write section, merged into data segment: */
+  . = (. + 0x00FF) & 0xFFFFFF00;
+  _erotext = .;
+  PROVIDE (erotext = .);
+  .reloc   :
+  {
+    *(.got)
+    _GOT2_TABLE_ = .;
+    *(.got2)
+    _FIXUP_TABLE_ = .;
+    *(.fixup)
+  }
+  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
+  __fixup_entries = (. - _FIXUP_TABLE_)>>2;
+
+  .data    :
+  {
+    *(.data)
+    *(.data1)
+    *(.sdata)
+    *(.sdata2)
+    *(.dynamic)
+    CONSTRUCTORS
+  }
+  _edata  =  .;
+  PROVIDE (edata = .);
+
+  . = .;
+  __u_boot_cmd_start = .;
+  .u_boot_cmd : { *(.u_boot_cmd) }
+  __u_boot_cmd_end = .;
+
+  . = .;
+  __start___ex_table = .;
+  __ex_table : { *(__ex_table) }
+  __stop___ex_table = .;
+
+  . = ALIGN(256);
+  __init_begin = .;
+  .text.init : { *(.text.init) }
+  .data.init : { *(.data.init) }
+  . = ALIGN(256);
+  __init_end = .;
+
+  __bss_start = .;
+  .bss (NOLOAD)       :
+  {
+   *(.sbss) *(.scommon)
+   *(.dynbss)
+   *(.bss)
+   *(COMMON)
+  }
+  _end = . ;
+  PROVIDE (end = .);
+}
diff --git a/board/gen860t/beeper.c b/board/gen860t/beeper.c
index b4c2c8988..c6be83f65 100644
--- a/board/gen860t/beeper.c
+++ b/board/gen860t/beeper.c
@@ -36,14 +36,14 @@
 
 /*
  * Initialize beeper-related hardware. Initialize timer 1 for use with
- * the beeper. Use 66 Mhz internal clock with prescale of 33 to get
+ * the beeper. Use 66 MHz internal clock with prescale of 33 to get
  * 1 uS period per count.
  * FIXME: we should really compute the prescale based on the reported
  * core clock frequency.
  */
 void init_beeper (void)
 {
-	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
 
 	immap->im_cpmtimer.cpmt_tgcr &= ~TGCR_RST1 | TGCR_STP1;
 	immap->im_cpmtimer.cpmt_tmr1 = ((33 << TMR_PS_SHIFT) & TMR_PS_MSK)
@@ -62,7 +62,7 @@ void set_beeper_frequency (uint frequency)
 {
 #define FREQ_LIMIT	2500
 
-	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
 
 	/*
 	 * Compute timer ticks given desired frequency.  The timer is set up
@@ -79,7 +79,7 @@ void set_beeper_frequency (uint frequency)
  */
 void beeper_on (void)
 {
-	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
 
 	immap->im_cpmtimer.cpmt_tgcr &= ~TGCR_STP1;
 }
@@ -89,7 +89,7 @@ void beeper_on (void)
  */
 void beeper_off (void)
 {
-	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
 
 	immap->im_cpmtimer.cpmt_tgcr |= TGCR_STP1;
 }
@@ -104,7 +104,7 @@ void beeper_off (void)
  */
 void set_beeper_volume (int steps)
 {
-	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
 	int i;
 
 	if (steps >= 0) {
diff --git a/board/gen860t/flash.c b/board/gen860t/flash.c
index 13faaf39f..827d9e0c6 100644
--- a/board/gen860t/flash.c
+++ b/board/gen860t/flash.c
@@ -25,15 +25,15 @@
 #include <common.h>
 #include <mpc8xx.h>
 
-#if defined(CFG_ENV_IS_IN_FLASH)
-# ifndef  CFG_ENV_ADDR
-#  define CFG_ENV_ADDR	(CFG_FLASH_BASE + CFG_ENV_OFFSET)
+#if defined(CONFIG_ENV_IS_IN_FLASH)
+# ifndef  CONFIG_ENV_ADDR
+#  define CONFIG_ENV_ADDR	(CONFIG_SYS_FLASH_BASE + CONFIG_ENV_OFFSET)
 # endif
-# ifndef  CFG_ENV_SIZE
-#  define CFG_ENV_SIZE	CFG_ENV_SECT_SIZE
+# ifndef  CONFIG_ENV_SIZE
+#  define CONFIG_ENV_SIZE	CONFIG_ENV_SECT_SIZE
 # endif
-# ifndef  CFG_ENV_SECT_SIZE
-#  define CFG_ENV_SECT_SIZE  CFG_ENV_SIZE
+# ifndef  CONFIG_ENV_SECT_SIZE
+#  define CONFIG_ENV_SECT_SIZE  CONFIG_ENV_SIZE
 # endif
 #endif
 
@@ -41,15 +41,15 @@
  * Use buffered writes to flash by default - they are about 32x faster than
  * single byte writes.
  */
-#ifndef  CFG_GEN860T_FLASH_USE_WRITE_BUFFER
-#define CFG_GEN860T_FLASH_USE_WRITE_BUFFER
+#ifndef  CONFIG_SYS_GEN860T_FLASH_USE_WRITE_BUFFER
+#define CONFIG_SYS_GEN860T_FLASH_USE_WRITE_BUFFER
 #endif
 
 /*
  * Max time to wait (in mS) for flash device to allocate a write buffer.
  */
-#ifndef CFG_FLASH_ALLOC_BUFFER_TOUT
-#define CFG_FLASH_ALLOC_BUFFER_TOUT		100
+#ifndef CONFIG_SYS_FLASH_ALLOC_BUFFER_TOUT
+#define CONFIG_SYS_FLASH_ALLOC_BUFFER_TOUT		100
 #endif
 
 /*
@@ -94,7 +94,7 @@
 #endif
 /*---------------------------------------------------------------------*/
 
-flash_info_t	flash_info[CFG_MAX_FLASH_BANKS];
+flash_info_t	flash_info[CONFIG_SYS_MAX_FLASH_BANKS];
 
 /*-----------------------------------------------------------------------
  * Functions
@@ -109,12 +109,12 @@ static void flash_get_offsets (ulong base, flash_info_t *info);
 unsigned long
 flash_init (void)
 {
-	volatile immap_t     *immap  = (immap_t *)CFG_IMMR;
+	volatile immap_t     *immap  = (immap_t *)CONFIG_SYS_IMMR;
 	volatile memctl8xx_t *memctl = &immap->im_memctl;
 	unsigned long size_b0;
 	int i;
 
-	for (i= 0; i < CFG_MAX_FLASH_BANKS; ++i) {
+	for (i= 0; i < CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
 		flash_info[i].flash_id = FLASH_UNKNOWN;
 	}
 
@@ -139,7 +139,7 @@ flash_init (void)
 	 * Remap FLASH according to real size
 	 */
 	memctl->memc_or0 |= (-size_b0 & 0xFFFF8000);
-	memctl->memc_br0 |= (CFG_FLASH_BASE & BR_BA_MSK);
+	memctl->memc_br0 |= (CONFIG_SYS_FLASH_BASE & BR_BA_MSK);
 
 	PRINTF("## After remap:\n"
 		   "  BR0: 0x%08x    OR0: 0x%08x\n", memctl->memc_br0, memctl->memc_or0);
@@ -147,27 +147,27 @@ flash_init (void)
 	/*
 	 * Re-do sizing to get full correct info
 	 */
-	size_b0 = flash_get_size ((vu_char *)CFG_FLASH_BASE, &flash_info[0]);
-	flash_get_offsets (CFG_FLASH_BASE, &flash_info[0]);
+	size_b0 = flash_get_size ((vu_char *)CONFIG_SYS_FLASH_BASE, &flash_info[0]);
+	flash_get_offsets (CONFIG_SYS_FLASH_BASE, &flash_info[0]);
 	flash_info[0].size = size_b0;
 
-#if CFG_MONITOR_BASE >= CFG_FLASH_BASE
+#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE
 	/*
 	 * Monitor protection is ON by default
 	 */
 	flash_protect(FLAG_PROTECT_SET,
-			  CFG_MONITOR_BASE,
-			  CFG_MONITOR_BASE + monitor_flash_len - 1,
+			  CONFIG_SYS_MONITOR_BASE,
+			  CONFIG_SYS_MONITOR_BASE + monitor_flash_len - 1,
 			  &flash_info[0]);
 #endif
 
-#ifdef	CFG_ENV_IS_IN_FLASH
+#ifdef	CONFIG_ENV_IS_IN_FLASH
 	/*
 	 * Environment protection ON by default
 	 */
 	flash_protect(FLAG_PROTECT_SET,
-			  CFG_ENV_ADDR,
-			  CFG_ENV_ADDR + CFG_ENV_SECT_SIZE - 1,
+			  CONFIG_ENV_ADDR,
+			  CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE - 1,
 			  &flash_info[0]);
 #endif
 
@@ -307,10 +307,10 @@ ulong flash_get_size (vu_char *addr, flash_info_t *info)
 			return (NO_FLASH);
 	}
 
-	if (info->sector_count > CFG_MAX_FLASH_SECT) {
+	if (info->sector_count > CONFIG_SYS_MAX_FLASH_SECT) {
 		printf ("** ERROR: sector count %d > max (%d) **\n",
-				info->sector_count, CFG_MAX_FLASH_SECT);
-				info->sector_count = CFG_MAX_FLASH_SECT;
+				info->sector_count, CONFIG_SYS_MAX_FLASH_SECT);
+				info->sector_count = CONFIG_SYS_MAX_FLASH_SECT;
 	}
 	return (info->size);
 }
@@ -385,7 +385,7 @@ flash_erase(flash_info_t *info, int s_first, int s_last)
 			udelay (1000);
 
 			while (((status = *addr) & SCS_SR7) != SCS_SR7) {
-				if ((now=get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+				if ((now=get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
 					printf ("Timeout\n");
 					*addr = SCS_BLOCK_ERASE_SUSPEND_CMD;
 					*addr = SCS_READ_CMD;
@@ -408,7 +408,7 @@ flash_erase(flash_info_t *info, int s_first, int s_last)
 }
 
 
-#ifdef CFG_GEN860T_FLASH_USE_WRITE_BUFFER
+#ifdef CONFIG_SYS_GEN860T_FLASH_USE_WRITE_BUFFER
 /*
  * Allocate a flash buffer, fill it with data and write it to the flash.
  * 0 - OK
@@ -451,10 +451,10 @@ write_flash_buffer8(flash_info_t *info_p, vu_char *src_p, vu_char *dest_p,
 	 */
 	*block_addr_p = SCS_WRITE_BUF_CMD;
 	while ((*block_addr_p & SCS_XSR7) != SCS_XSR7) {
-		if (get_timer(time) >  CFG_FLASH_ALLOC_BUFFER_TOUT) {
+		if (get_timer(time) >  CONFIG_SYS_FLASH_ALLOC_BUFFER_TOUT) {
 			PRINTF("%s:%d: Buffer allocation timeout @ 0x%p (waited %d mS)\n",
 				   __FUNCTION__, __LINE__, block_addr_p,
-				   CFG_FLASH_ALLOC_BUFFER_TOUT);
+				   CONFIG_SYS_FLASH_ALLOC_BUFFER_TOUT);
 			return 1;
 		}
 		*block_addr_p = SCS_WRITE_BUF_CMD;
@@ -478,9 +478,9 @@ write_flash_buffer8(flash_info_t *info_p, vu_char *src_p, vu_char *dest_p,
 #if 1
 	time = get_timer(0);
 	while ((*block_addr_p & SCS_SR7) != SCS_SR7) {
-		if (get_timer(time) >  CFG_FLASH_WRITE_TOUT) {
+		if (get_timer(time) >  CONFIG_SYS_FLASH_WRITE_TOUT) {
 			PRINTF("%s:%d: Write timeout @ 0x%p (waited %d mS)\n",
-				   __FUNCTION__, __LINE__, block_addr_p, CFG_FLASH_WRITE_TOUT);
+				   __FUNCTION__, __LINE__, block_addr_p, CONFIG_SYS_FLASH_WRITE_TOUT);
 			return 1;
 		}
 	}
@@ -502,7 +502,7 @@ int
 write_buff(flash_info_t *info_p, uchar *src_p, ulong addr, ulong count)
 {
 	int rc = 0;
-#ifdef CFG_GEN860T_FLASH_USE_WRITE_BUFFER
+#ifdef CONFIG_SYS_GEN860T_FLASH_USE_WRITE_BUFFER
 #define FLASH_WRITE_BUF_SIZE	0x00000020	/* 32 bytes */
 	int i;
 	uint bufs;
@@ -520,7 +520,7 @@ write_buff(flash_info_t *info_p, uchar *src_p, ulong addr, ulong count)
 		return 4;
 	}
 
-#ifdef CFG_GEN860T_FLASH_USE_WRITE_BUFFER
+#ifdef CONFIG_SYS_GEN860T_FLASH_USE_WRITE_BUFFER
 	sp = src_p;
 	dp = (uchar *)addr;
 
@@ -632,7 +632,7 @@ write_data8 (flash_info_t *info, ulong dest, uchar data)
 	start = get_timer (0);
 
 	while (((status = *addr) & SCS_SR7) != SCS_SR7) {
-		if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+		if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
 			*addr = SCS_READ_CMD;
 			return (1);
 		}
diff --git a/board/gen860t/fpga.c b/board/gen860t/fpga.c
index 1e6bdf1cc..29cad2ee8 100644
--- a/board/gen860t/fpga.c
+++ b/board/gen860t/fpga.c
@@ -161,7 +161,7 @@ int test_fpga_ibtr (void)
  */
 void fpga_reset (int assert)
 {
-	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
 
 	PRINTF ("%s:%d: RESET ", __FUNCTION__, __LINE__);
 	if (assert) {
@@ -210,7 +210,7 @@ int gen860t_init_fpga (void)
  */
 int fpga_pgm_fn (int assert, int flush, int cookie)
 {
-	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
 
 	PRINTF ("%s:%d: FPGA PROGRAM ", __FUNCTION__, __LINE__);
 
@@ -233,7 +233,7 @@ int fpga_pgm_fn (int assert, int flush, int cookie)
  */
 int fpga_init_fn (int cookie)
 {
-	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
 
 	PRINTF ("%s:%d: INIT check... ", __FUNCTION__, __LINE__);
 	if (immap->im_cpm.cp_pbdat & (0x80000000 >> FPGA_INIT_BIT_NUM)) {
@@ -251,7 +251,7 @@ int fpga_init_fn (int cookie)
  */
 int fpga_done_fn (int cookie)
 {
-	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
 
 	PRINTF ("%s:%d: DONE check... ", __FUNCTION__, __LINE__);
 	if (immap->im_cpm.cp_pbdat & (0x80000000 >> FPGA_DONE_BIT_NUM)) {
diff --git a/board/gen860t/gen860t.c b/board/gen860t/gen860t.c
index e3d0e435d..008f765af 100644
--- a/board/gen860t/gen860t.c
+++ b/board/gen860t/gen860t.c
@@ -160,7 +160,7 @@ int checkboard (void)
  */
 phys_size_t initdram (int board_type)
 {
-	volatile immap_t *immr = (immap_t *) CFG_IMMR;
+	volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
 	volatile memctl8xx_t *memctl = &immr->im_memctl;
 
 	upmconfig (UPMA,
@@ -171,14 +171,14 @@ phys_size_t initdram (int board_type)
 	/*
 	 * Setup MAMR register
 	 */
-	memctl->memc_mptpr = CFG_MPTPR_1BK_8K;
-	memctl->memc_mamr = CFG_MAMR_8COL & (~(MAMR_PTAE));	/* no refresh yet */
+	memctl->memc_mptpr = CONFIG_SYS_MPTPR_1BK_8K;
+	memctl->memc_mamr = CONFIG_SYS_MAMR_8COL & (~(MAMR_PTAE));	/* no refresh yet */
 
 	/*
 	 * Map CS1* to SDRAM bank
 	 */
-	memctl->memc_or1 = CFG_OR1;
-	memctl->memc_br1 = CFG_BR1;
+	memctl->memc_or1 = CONFIG_SYS_OR1;
+	memctl->memc_br1 = CONFIG_SYS_BR1;
 
 	/*
 	 * Perform SDRAM initialization sequence:
@@ -223,8 +223,6 @@ phys_size_t initdram (int board_type)
  * The DOC lives in the CS2* space
  */
 #if defined(CONFIG_CMD_DOC)
-extern void doc_probe (ulong physadr);
-
 void doc_init (void)
 {
 	printf ("Probing at 0x%.8x: ", DOC_BASE);
@@ -237,7 +235,7 @@ void doc_init (void)
  */
 int misc_init_r (void)
 {
-	volatile immap_t *immr = (immap_t *) CFG_IMMR;
+	volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
 	volatile memctl8xx_t *memctl = &immr->im_memctl;
 
 	/*
diff --git a/board/gen860t/u-boot-flashenv.lds b/board/gen860t/u-boot-flashenv.lds
index bb03d3aac..6c8346ab5 100644
--- a/board/gen860t/u-boot-flashenv.lds
+++ b/board/gen860t/u-boot-flashenv.lds
@@ -125,6 +125,7 @@ SECTIONS
    *(.dynbss)
    *(.bss)
    *(COMMON)
+   . = ALIGN(4);
   }
 
   _end = . ;
@@ -133,6 +134,6 @@ SECTIONS
   .ppcenv:
   {
     . = env_offset;
-    common/environment.o
+    common/env_embedded.o
   }
 }
diff --git a/board/gen860t/u-boot.lds b/board/gen860t/u-boot.lds
index d33aa2ea1..cab7a1024 100644
--- a/board/gen860t/u-boot.lds
+++ b/board/gen860t/u-boot.lds
@@ -126,6 +126,7 @@ SECTIONS
    *(.dynbss)
    *(.bss)
    *(COMMON)
+   . = ALIGN(4);
   }
   _end = . ;
   PROVIDE (end = .);
diff --git a/board/genietv/flash.c b/board/genietv/flash.c
index 7292c9c12..5313ad8b0 100644
--- a/board/genietv/flash.c
+++ b/board/genietv/flash.c
@@ -24,7 +24,7 @@
 #include <common.h>
 #include <mpc8xx.h>
 
-flash_info_t	flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips	*/
+flash_info_t	flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips	*/
 
 /*-----------------------------------------------------------------------
  * Functions
@@ -42,20 +42,20 @@ unsigned long flash_init (void)
 	int i;
 
 	/* Init: no FLASHes known */
-	for (i=0; i < CFG_MAX_FLASH_BANKS; ++i)
+	for (i=0; i < CONFIG_SYS_MAX_FLASH_BANKS; ++i)
 	    flash_info[i].flash_id = FLASH_UNKNOWN;
 
 	/* Detect size */
-	size_b0 = flash_get_size((vu_long *)CFG_FLASH_BASE, &flash_info[0]);
+	size_b0 = flash_get_size((vu_long *)CONFIG_SYS_FLASH_BASE, &flash_info[0]);
 
 	/* Setup offsets */
-	flash_get_offsets (CFG_FLASH_BASE, &flash_info[0]);
+	flash_get_offsets (CONFIG_SYS_FLASH_BASE, &flash_info[0]);
 
-#if CFG_MONITOR_BASE >= CFG_FLASH_BASE
+#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE
 	/* Monitor protection ON by default */
 	flash_protect(FLAG_PROTECT_SET,
-		      CFG_MONITOR_BASE,
-		      CFG_MONITOR_BASE+monitor_flash_len-1,
+		      CONFIG_SYS_MONITOR_BASE,
+		      CONFIG_SYS_MONITOR_BASE+monitor_flash_len-1,
 		      &flash_info[0]);
 #endif
 
@@ -322,7 +322,7 @@ int	flash_erase (flash_info_t *info, int s_first, int s_last)
 
 	while ((addr[0] & 0xFF) != 0xFF)
 	{
-		if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+		if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
 			printf ("Timeout\n");
 			return 1;
 		}
@@ -454,7 +454,7 @@ static int write_word (flash_info_t *info, ulong dest, ulong data)
 	    start = get_timer (0);
 	    while ((*cdest ^ *cdata) & 0x80)
 	    {
-		if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+		if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
 			return (1);
 		}
 	    }
diff --git a/board/genietv/genietv.c b/board/genietv/genietv.c
index fc2116967..0a015ea2d 100644
--- a/board/genietv/genietv.c
+++ b/board/genietv/genietv.c
@@ -29,7 +29,7 @@
 #include <common.h>
 #include <mpc8xx.h>
 
-#define CFG_PA7		0x0100
+#define CONFIG_SYS_PA7		0x0100
 
 /* ------------------------------------------------------------------------- */
 
@@ -104,7 +104,7 @@ int checkboard (void)
 #if 0
 static void PrintState (void)
 {
-	volatile immap_t *im = (immap_t *) CFG_IMMR;
+	volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR;
 	volatile memctl8xx_t *memctl = &im->im_memctl;
 
 	printf ("\n0 - FLASH: B=%08x O=%08x", memctl->memc_br0,
@@ -120,18 +120,18 @@ static void PrintState (void)
 
 phys_size_t initdram (int board_type)
 {
-	volatile immap_t *im = (immap_t *) CFG_IMMR;
+	volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR;
 	volatile memctl8xx_t *memctl = &im->im_memctl;
 	long int size_b0, size_b1, size8;
 
 	/* Enable SDRAM */
 
 	/* Configuring PA7 for general purpouse output pin */
-	im->im_ioport.iop_papar &= ~CFG_PA7;	/* 0 = general purpouse */
-	im->im_ioport.iop_padir |= CFG_PA7;	/* 1 = output */
+	im->im_ioport.iop_papar &= ~CONFIG_SYS_PA7;	/* 0 = general purpouse */
+	im->im_ioport.iop_padir |= CONFIG_SYS_PA7;	/* 1 = output */
 
 	/* Enable SDRAM - PA7 = 1 */
-	im->im_ioport.iop_padat |= CFG_PA7;	/* value of PA7 */
+	im->im_ioport.iop_padat |= CONFIG_SYS_PA7;	/* value of PA7 */
 
 	/*
 	 * Preliminary prescaler for refresh (depends on number of
@@ -139,9 +139,9 @@ phys_size_t initdram (int board_type)
 	 * with two SDRAM banks or four cycles every 31.2 us with one
 	 * bank. It will be adjusted after memory sizing.
 	 */
-	memctl->memc_mptpr = CFG_MPTPR_2BK_4K;
+	memctl->memc_mptpr = CONFIG_SYS_MPTPR_2BK_4K;
 
-	memctl->memc_mbmr = CFG_MBMR_8COL;
+	memctl->memc_mbmr = CONFIG_SYS_MBMR_8COL;
 
 	upmconfig (UPMB, (uint *) sdram_table,
 		   sizeof (sdram_table) / sizeof (uint));
@@ -152,11 +152,11 @@ phys_size_t initdram (int board_type)
 	 * SDRAM size has been determined.
 	 */
 
-	memctl->memc_or1 = 0xF0000000 | CFG_OR_TIMING_SDRAM;
+	memctl->memc_or1 = 0xF0000000 | CONFIG_SYS_OR_TIMING_SDRAM;
 	memctl->memc_br1 =
 		((SDRAM_BASE1_PRELIM & BR_BA_MSK) | BR_MS_UPMB | BR_V);
 
-	memctl->memc_or2 = 0xF0000000 | CFG_OR_TIMING_SDRAM;
+	memctl->memc_or2 = 0xF0000000 | CONFIG_SYS_OR_TIMING_SDRAM;
 	memctl->memc_br2 =
 		((SDRAM_BASE2_PRELIM & BR_BA_MSK) | BR_MS_UPMB | BR_V);
 
@@ -168,14 +168,14 @@ phys_size_t initdram (int board_type)
 	memctl->memc_mcr = 0x80804105;	/* SDRAM bank 1 */
 
 	/* Execute refresh 8 times */
-	memctl->memc_mbmr = (CFG_MBMR_8COL & ~MBMR_TLFB_MSK) | MBMR_TLFB_8X;
+	memctl->memc_mbmr = (CONFIG_SYS_MBMR_8COL & ~MBMR_TLFB_MSK) | MBMR_TLFB_8X;
 
 	memctl->memc_mcr = 0x80802130;	/* SDRAM bank 0 - execute twice */
 
 	memctl->memc_mcr = 0x80804130;	/* SDRAM bank 1 - execute twice */
 
 	/* Execute refresh 4 times */
-	memctl->memc_mbmr = CFG_MBMR_8COL;
+	memctl->memc_mbmr = CONFIG_SYS_MBMR_8COL;
 
 	/*
 	 * Check Bank 0 Memory Size for re-configuration
@@ -187,7 +187,7 @@ phys_size_t initdram (int board_type)
 	PrintState ();
 #endif
 /*    printf ("\nChecking bank1..."); */
-	size8 = dram_size (CFG_MBMR_8COL, (long *) SDRAM_BASE1_PRELIM,
+	size8 = dram_size (CONFIG_SYS_MBMR_8COL, (long *) SDRAM_BASE1_PRELIM,
 			   SDRAM_MAX_SIZE);
 
 	size_b0 = size8;
@@ -201,17 +201,17 @@ phys_size_t initdram (int board_type)
 	 * Final mapping: map bigger bank first
 	 */
 
-	memctl->memc_or1 = ((-size_b0) & 0xFFFF0000) | CFG_OR_TIMING_SDRAM;
-	memctl->memc_br1 = (CFG_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMB | BR_V;
+	memctl->memc_or1 = ((-size_b0) & 0xFFFF0000) | CONFIG_SYS_OR_TIMING_SDRAM;
+	memctl->memc_br1 = (CONFIG_SYS_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMB | BR_V;
 
 	if (size_b1 > 0) {
 		/*
 		 * Position Bank 1 immediately above Bank 0
 		 */
 		memctl->memc_or2 =
-			((-size_b1) & 0xFFFF0000) | CFG_OR_TIMING_SDRAM;
+			((-size_b1) & 0xFFFF0000) | CONFIG_SYS_OR_TIMING_SDRAM;
 		memctl->memc_br2 =
-			((CFG_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMB | BR_V) +
+			((CONFIG_SYS_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMB | BR_V) +
 			(size_b0 & BR_BA_MSK);
 	} else {
 		/*
@@ -221,14 +221,14 @@ phys_size_t initdram (int board_type)
 		 */
 		memctl->memc_br2 = 0;
 		/* adjust refresh rate depending on SDRAM type, one bank */
-		memctl->memc_mptpr = CFG_MPTPR_1BK_4K;
+		memctl->memc_mptpr = CONFIG_SYS_MPTPR_1BK_4K;
 	}
 
 	/* If no memory detected, disable SDRAM */
 	if ((size_b0 + size_b1) == 0) {
 		printf ("disabling SDRAM!\n");
 		/* Disable SDRAM - PA7 = 1 */
-		im->im_ioport.iop_padat &= ~CFG_PA7;	/* value of PA7 */
+		im->im_ioport.iop_padat &= ~CONFIG_SYS_PA7;	/* value of PA7 */
 	}
 /*	else */
 /*    printf("done! (%08lx)\n", size_b0 + size_b1); */
@@ -269,8 +269,8 @@ static long int dram_size (long int mbmr_value, long int *base,
 
 #if defined(CONFIG_CMD_PCMCIA)
 
-#ifdef	CFG_PCMCIA_MEM_ADDR
-volatile unsigned char *pcmcia_mem = (unsigned char *) CFG_PCMCIA_MEM_ADDR;
+#ifdef	CONFIG_SYS_PCMCIA_MEM_ADDR
+volatile unsigned char *pcmcia_mem = (unsigned char *) CONFIG_SYS_PCMCIA_MEM_ADDR;
 #endif
 
 int pcmcia_init (void)
@@ -281,10 +281,10 @@ int pcmcia_init (void)
 	/*
 	 ** Enable the PCMCIA for a Flash card.
 	 */
-	pcmp = (pcmconf8xx_t *) (&(((immap_t *) CFG_IMMR)->im_pcmcia));
+	pcmp = (pcmconf8xx_t *) (&(((immap_t *) CONFIG_SYS_IMMR)->im_pcmcia));
 
 #if 0
-	pcmp->pcmc_pbr0 = CFG_PCMCIA_MEM_ADDR;
+	pcmp->pcmc_pbr0 = CONFIG_SYS_PCMCIA_MEM_ADDR;
 	pcmp->pcmc_por0 = 0xc00ff05d;
 #endif
 
diff --git a/board/genietv/u-boot.lds b/board/genietv/u-boot.lds
index 3573608d2..3c19d19ab 100644
--- a/board/genietv/u-boot.lds
+++ b/board/genietv/u-boot.lds
@@ -63,7 +63,7 @@ SECTIONS
     lib_generic/zlib.o		(.text)
 
     . = env_offset;
-    common/environment.o(.text)
+    common/env_embedded.o(.text)
     *(.text)
     *(.fixup)
     *(.got1)
@@ -137,8 +137,9 @@ SECTIONS
   . = ALIGN(256 * 1024);
   .ppcenv	:
   {
-    common/environment.o (.ppcenv)
+    common/env_embedded.o (.ppcenv)
   }
+  . = ALIGN(4);
   _end = . ;
   PROVIDE (end = .);
 }
diff --git a/board/genietv/u-boot.lds.debug b/board/genietv/u-boot.lds.debug
index 8dedba814..61fdfe53e 100644
--- a/board/genietv/u-boot.lds.debug
+++ b/board/genietv/u-boot.lds.debug
@@ -63,7 +63,7 @@ SECTIONS
     lib_generic/zlib.o		(.text)
 
     . = env_offset;
-    common/environment.o(.text)
+    common/env_embedded.o(.text)
     *(.text)
     *(.fixup)
     *(.got1)
@@ -135,7 +135,7 @@ SECTIONS
   . = ALIGN(256 * 1024);
   .ppcenv	:
   {
-    common/environment.o (.ppcenv)
+    common/env_embedded.o (.ppcenv)
   }
   _end = . ;
   PROVIDE (end = .);
diff --git a/board/gth/ee_access.c b/board/gth/ee_access.c
index 716c90ed6..2a33a0edd 100644
--- a/board/gth/ee_access.c
+++ b/board/gth/ee_access.c
@@ -152,7 +152,7 @@ read_byte(void){
   int i;
   int Value;
   u8 Result=0;
-#ifndef CFG_IMMR
+#ifndef CONFIG_SYS_IMMR
   u32 Flags;
 #endif
 
@@ -162,7 +162,7 @@ read_byte(void){
     /* Small delay between pulses */
     udelay(1);
 
-#ifndef CFG_IMMR
+#ifndef CONFIG_SYS_IMMR
     /* Disable irq */
     save_flags(Flags);
     cli();
@@ -182,7 +182,7 @@ read_byte(void){
     if(Value)
       Value=1;
 
-#ifndef CFG_IMMR
+#ifndef CONFIG_SYS_IMMR
     /* Enable irq */
     restore_flags(Flags);
 #endif
@@ -205,7 +205,7 @@ write_byte(u8 Byte){
      Write LSb first */
   int i;
   int Value;
-#ifndef CFG_IMMR
+#ifndef CONFIG_SYS_IMMR
   u32 Flags;
 #endif
 
@@ -216,7 +216,7 @@ write_byte(u8 Byte){
     udelay(1);
     Value = Byte&1;
 
-#ifndef CFG_IMMR
+#ifndef CONFIG_SYS_IMMR
     /* Disable irq */
     save_flags(Flags);
     cli();
@@ -237,7 +237,7 @@ write_byte(u8 Byte){
 
     WRITE_PORT(1);
 
-#ifndef CFG_IMMR
+#ifndef CONFIG_SYS_IMMR
     /* Enable irq */
     restore_flags(Flags);
 #endif
@@ -289,7 +289,7 @@ int ee_init_data(void){
   int i;
   u8 Tx[10];
   int tmp;
-  volatile immap_t *immap = (immap_t *)CFG_IMMR;
+  volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR;
 
   while(0){
     tmp = 1-tmp;
diff --git a/board/gth/ee_dev.h b/board/gth/ee_dev.h
index 417c7b675..3004b4661 100644
--- a/board/gth/ee_dev.h
+++ b/board/gth/ee_dev.h
@@ -9,10 +9,10 @@
 
 #define E_DEBUG(fmt,args...) if( Debug ) printk(KERN_DEBUG"EE: " fmt, ##args)
 
-#define PORT_B_PAR ((volatile immap_t *)CFG_IMMR)->im_cpm.cp_pbpar
-#define PORT_B_ODR ((volatile immap_t *)CFG_IMMR)->im_cpm.cp_pbodr
-#define PORT_B_DIR ((volatile immap_t *)CFG_IMMR)->im_cpm.cp_pbdir
-#define PORT_B_DAT ((volatile immap_t *)CFG_IMMR)->im_cpm.cp_pbdat
+#define PORT_B_PAR ((volatile immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pbpar
+#define PORT_B_ODR ((volatile immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pbodr
+#define PORT_B_DIR ((volatile immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pbdir
+#define PORT_B_DAT ((volatile immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pbdat
 
 #define SET_PORT_B_INPUT(Mask)  PORT_B_DIR &= ~(Mask)
 #define SET_PORT_B_OUTPUT(Mask) PORT_B_DIR |= Mask
diff --git a/board/gth/flash.c b/board/gth/flash.c
index 11e105e58..169270be1 100644
--- a/board/gth/flash.c
+++ b/board/gth/flash.c
@@ -24,7 +24,7 @@
 #include <common.h>
 #include <mpc8xx.h>
 
-flash_info_t	flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips	*/
+flash_info_t	flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips	*/
 
 /*-----------------------------------------------------------------------
  * Functions
@@ -44,7 +44,7 @@ static void flash_get_offsets (ulong base, flash_info_t *info);
 
 unsigned long flash_init (void)
 {
-	volatile immap_t     *immap  = (immap_t *)CFG_IMMR;
+	volatile immap_t     *immap  = (immap_t *)CONFIG_SYS_IMMR;
 	volatile memctl8xx_t *memctl = &immap->im_memctl;
 	unsigned long size_b0, size_b1;
 	int i;
@@ -54,7 +54,7 @@ unsigned long flash_init (void)
 	return(0x1fffff);
 
 	/* Init: no FLASHes known */
-	for (i=0; i < CFG_MAX_FLASH_BANKS; ++i)
+	for (i=0; i < CONFIG_SYS_MAX_FLASH_BANKS; ++i)
 	{
 		flash_info[i].flash_id = FLASH_UNKNOWN;
 	}
@@ -90,45 +90,45 @@ unsigned long flash_init (void)
 	  size_b1 = 0;
 
 	  /* Remap FLASH according to real size */
-	  memctl->memc_or0 = CFG_OR0_PRELIM;
-	  memctl->memc_br0 = CFG_BR0_PRELIM;
+	  memctl->memc_or0 = CONFIG_SYS_OR0_PRELIM;
+	  memctl->memc_br0 = CONFIG_SYS_BR0_PRELIM;
 
 	  /* Re-do sizing to get full correct info */
-	  size_b0 = flash_get_size((vu_long *)CFG_FLASH_BASE, &flash_info[0]);
+	  size_b0 = flash_get_size((vu_long *)CONFIG_SYS_FLASH_BASE, &flash_info[0]);
 
-	  flash_get_offsets (CFG_FLASH_BASE, &flash_info[0]);
+	  flash_get_offsets (CONFIG_SYS_FLASH_BASE, &flash_info[0]);
 
-#if CFG_MONITOR_BASE >= CFG_FLASH_BASE
+#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE
 	  /* monitor protection ON by default */
 	  (void)flash_protect(FLAG_PROTECT_SET,
-			    CFG_MONITOR_BASE,
-			    CFG_MONITOR_BASE+monitor_flash_len-1,
+			    CONFIG_SYS_MONITOR_BASE,
+			    CONFIG_SYS_MONITOR_BASE+monitor_flash_len-1,
 			    &flash_info[0]);
 #endif
 
 	if (size_b1)
 	{
-	  /* memctl->memc_or1 = CFG_OR1_PRELIM;
-	     memctl->memc_br1 = CFG_BR1_PRELIM; */
+	  /* memctl->memc_or1 = CONFIG_SYS_OR1_PRELIM;
+	     memctl->memc_br1 = CONFIG_SYS_BR1_PRELIM; */
 
 		/* Re-do sizing to get full correct info */
-		size_b1 = flash_get_size((vu_long *)(CFG_FLASH_BASE + size_b0),
+		size_b1 = flash_get_size((vu_long *)(CONFIG_SYS_FLASH_BASE + size_b0),
 					 &flash_info[1]);
 
-		flash_get_offsets (CFG_FLASH_BASE + size_b0, &flash_info[1]);
+		flash_get_offsets (CONFIG_SYS_FLASH_BASE + size_b0, &flash_info[1]);
 
-#if CFG_MONITOR_BASE >= CFG_FLASH_BASE
+#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE
 		/* monitor protection ON by default */
 		(void)flash_protect(FLAG_PROTECT_SET,
-				    CFG_MONITOR_BASE,
-				    CFG_MONITOR_BASE+monitor_flash_len-1,
+				    CONFIG_SYS_MONITOR_BASE,
+				    CONFIG_SYS_MONITOR_BASE+monitor_flash_len-1,
 				    &flash_info[1]);
 #endif
 	}
 	else
 	{
-/*	    memctl->memc_or1 = CFG_OR1_PRELIM;
- FIXME	    memctl->memc_br1 = CFG_BR1_PRELIM;  */
+/*	    memctl->memc_or1 = CONFIG_SYS_OR1_PRELIM;
+ FIXME	    memctl->memc_br1 = CONFIG_SYS_BR1_PRELIM;  */
 
 		flash_info[1].flash_id = FLASH_UNKNOWN;
 		flash_info[1].sector_count = -1;
@@ -501,7 +501,7 @@ int	flash_erase (flash_info_t *info, int s_first, int s_last)
 	while ((addr[0] & 0xFFFFFFFF) != 0xFFFFFFFF)
 #endif
 	{
-		if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+		if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
 			printf ("Timeout\n");
 			return 1;
 		}
@@ -638,7 +638,7 @@ static int write_word (flash_info_t *info, ulong dest, ulong data)
 	while ((*((vu_long *)dest) & 0x80808080) != (data & 0x80808080))
 #endif
 	{
-		if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+		if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
 			return (1);
 		}
 	}
diff --git a/board/gth/gth.c b/board/gth/gth.c
index 788a6a094..4399db2d5 100644
--- a/board/gth/gth.c
+++ b/board/gth/gth.c
@@ -38,7 +38,7 @@
 
 int checkboard (void)
 {
-	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
 	int Id = 0;
 	int Rev = 0;
 	u32 Pbdat;
@@ -162,7 +162,7 @@ const uint fpga_table[] = {
 
 int _initsdram (uint base, uint * noMbytes)
 {
-	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
 	volatile memctl8xx_t *mc = &immap->im_memctl;
 	volatile u32 *memptr;
 
@@ -235,7 +235,7 @@ int _initsdram (uint base, uint * noMbytes)
 
 void _sdramdisable (void)
 {
-	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
 	volatile memctl8xx_t *memctl = &immap->im_memctl;
 
 	memctl->memc_br1 = 0x00000000;
@@ -345,7 +345,7 @@ do                              \
 static void write_bootdata (volatile u16 * addr, u8 System, u8 Count)
 {
 	u16 data;
-	volatile u16 *flash = (u16 *) (CFG_FLASH_BASE);
+	volatile u16 *flash = (u16 *) (CONFIG_SYS_FLASH_BASE);
 
 	if ((System != FAILSAFE_BOOT) & (System != SYSTEM_BOOT)) {
 		printf ("Invalid system data %u, setting failsafe\n", System);
@@ -376,12 +376,12 @@ static void write_bootdata (volatile u16 * addr, u8 System, u8 Count)
 static void maybe_update_restart_reason (volatile u32 * addr32)
 {
 	/* Update addr if sw wd restart */
-	volatile u16 *flash = (u16 *) (CFG_FLASH_BASE);
+	volatile u16 *flash = (u16 *) (CONFIG_SYS_FLASH_BASE);
 	volatile u16 *addr_16 = (u16 *) addr32;
 	u32 rsr;
 
 	/* Dont reset register now */
-	rsr = ((volatile immap_t *) CFG_IMMR)->im_clkrst.car_rsr;
+	rsr = ((volatile immap_t *) CONFIG_SYS_IMMR)->im_clkrst.car_rsr;
 
 	rsr >>= 24;
 
@@ -419,7 +419,7 @@ static void check_restart_reason (void)
 	int i;
 	volatile u32 *raddr;
 
-	raddr = (u32 *) (CFG_FLASH_BASE + POWER_OFFSET);
+	raddr = (u32 *) (CONFIG_SYS_FLASH_BASE + POWER_OFFSET);
 
 	if (*raddr == 0xFFFFFFFF) {
 		/* Nothing written */
@@ -456,7 +456,7 @@ static void check_boot_tries (void)
 	u8 system;
 	u8 count;
 
-	addr = (u16 *) (CFG_FLASH_BASE + BOOTDATA_OFFSET);
+	addr = (u16 *) (CONFIG_SYS_FLASH_BASE + BOOTDATA_OFFSET);
 
 	if (*addr == 0xFFFF) {
 		printf ("*** No bootdata exists. ***\n");
@@ -528,7 +528,7 @@ int misc_init_r (void)
 	u8 Tx[5];
 	int page;
 	int read = 0;
-	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
 
 	/* Kill fpga */
 	immap->im_ioport.iop_papar &= ~(PA_FL_CONFIG | PA_FL_CE);
diff --git a/board/gth/pcmcia.c b/board/gth/pcmcia.c
index cffcbde89..a4db16d0c 100644
--- a/board/gth/pcmcia.c
+++ b/board/gth/pcmcia.c
@@ -31,10 +31,10 @@ int pcmcia_hardware_enable (int slot)
 
 	debug ("hardware_enable: GTH Slot %c\n", 'A' + slot);
 
-	immap = (immap_t *) CFG_IMMR;
-	sysp = (sysconf8xx_t *) (&(((immap_t *) CFG_IMMR)->im_siu_conf));
-	pcmp = (pcmconf8xx_t *) (&(((immap_t *) CFG_IMMR)->im_pcmcia));
-	cp = (cpm8xx_t *) (&(((immap_t *) CFG_IMMR)->im_cpm));
+	immap = (immap_t *) CONFIG_SYS_IMMR;
+	sysp = (sysconf8xx_t *) (&(((immap_t *) CONFIG_SYS_IMMR)->im_siu_conf));
+	pcmp = (pcmconf8xx_t *) (&(((immap_t *) CONFIG_SYS_IMMR)->im_pcmcia));
+	cp = (cpm8xx_t *) (&(((immap_t *) CONFIG_SYS_IMMR)->im_cpm));
 
 	/* clear interrupt state, and disable interrupts */
 	pcmp->pcmc_pscr = PCMCIA_MASK (_slot_);
diff --git a/board/gth/u-boot.lds b/board/gth/u-boot.lds
index 95f94454d..d5df1f4f4 100644
--- a/board/gth/u-boot.lds
+++ b/board/gth/u-boot.lds
@@ -54,7 +54,7 @@ SECTIONS
   {
     cpu/mpc8xx/start.o(.text)
     *(.text)
-    common/environment.o(.text)
+    common/env_embedded.o(.text)
     *(.fixup)
     *(.got1)
   }
@@ -123,6 +123,7 @@ SECTIONS
    *(.dynbss)
    *(.bss)
    *(COMMON)
+   . = ALIGN(4);
   }
   _end = . ;
   PROVIDE (end = .);
diff --git a/board/gth2/flash.c b/board/gth2/flash.c
index f96edffa2..1b3c43c43 100644
--- a/board/gth2/flash.c
+++ b/board/gth2/flash.c
@@ -23,7 +23,7 @@
 
 #include <common.h>
 
-flash_info_t flash_info[CFG_MAX_FLASH_BANKS];	/* info for FLASH chips */
+flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];	/* info for FLASH chips */
 
 /*-----------------------------------------------------------------------
  * flash_init()
diff --git a/board/gth2/gth2.c b/board/gth2/gth2.c
index cea65c677..59873d5ef 100644
--- a/board/gth2/gth2.c
+++ b/board/gth2/gth2.c
@@ -154,19 +154,19 @@ int checkboard (void)
 	   We need to map it into a 32 bit addresses */
 	write_one_tlb(20,                 /* index */
 		      0x01ffe000,         /* Pagemask, 16 MB pages */
-		      CFG_PCMCIA_IO_BASE, /* Hi */
+		      CONFIG_SYS_PCMCIA_IO_BASE, /* Hi */
 		      0x3C000017,         /* Lo0 */
 		      0x3C200017);        /* Lo1 */
 
 	write_one_tlb(21,                   /* index */
 		      0x01ffe000,           /* Pagemask, 16 MB pages */
-		      CFG_PCMCIA_ATTR_BASE, /* Hi */
+		      CONFIG_SYS_PCMCIA_ATTR_BASE, /* Hi */
 		      0x3D000017,           /* Lo0 */
 		      0x3D200017);          /* Lo1 */
 
 	write_one_tlb(22,                   /* index */
 		      0x01ffe000,           /* Pagemask, 16 MB pages */
-		      CFG_PCMCIA_MEM_ADDR,  /* Hi */
+		      CONFIG_SYS_PCMCIA_MEM_ADDR,  /* Hi */
 		      0x3E000017,           /* Lo0 */
 		      0x3E200017);          /* Lo1 */
 
@@ -209,7 +209,7 @@ do                              \
 static void write_bootdata (volatile u16 * addr, u8 System, u8 Count)
 {
 	u16 data;
-	volatile u16 *flash = (u16 *) (CFG_FLASH_BASE);
+	volatile u16 *flash = (u16 *) (CONFIG_SYS_FLASH_BASE);
 
 	switch(System){
 	case FAILSAFE_BOOT:
@@ -302,7 +302,7 @@ static void check_boot_tries (void)
 	u8 system = FAILSAFE_BOOT;
 	u8 count;
 
-	addr = (u16 *) (CFG_FLASH_BASE + BOOTDATA_OFFSET);
+	addr = (u16 *) (CONFIG_SYS_FLASH_BASE + BOOTDATA_OFFSET);
 
 	if (*addr == 0xFFFF) {
 		printf ("*** No bootdata exists. ***\n");
diff --git a/board/gth2/lowlevel_init.S b/board/gth2/lowlevel_init.S
index 4c4f0ebd2..bc31c0053 100644
--- a/board/gth2/lowlevel_init.S
+++ b/board/gth2/lowlevel_init.S
@@ -6,7 +6,7 @@
 #include <asm/mipsregs.h>
 
 #define CP0_Config0		$16
-#define MEM_1MS			((CFG_MHZ) * 1000)
+#define MEM_1MS			((CONFIG_SYS_MHZ) * 1000)
 #define GPIO_RJ1LY     (1<<22)
 #define GPIO_CFRESET   (1<<10)
 
diff --git a/board/gth2/u-boot.lds b/board/gth2/u-boot.lds
index 8265130ff..05946434a 100644
--- a/board/gth2/u-boot.lds
+++ b/board/gth2/u-boot.lds
@@ -65,6 +65,6 @@ SECTIONS
 
 	. = ALIGN(4);
 	.sbss (NOLOAD)  : { *(.sbss) }
-	.bss (NOLOAD)  : { *(.bss) }
+	.bss (NOLOAD)  : { *(.bss) . = ALIGN(4); }
 	uboot_end = .;
 }
diff --git a/board/gw8260/flash.c b/board/gw8260/flash.c
index 5620a1d8b..6035f6976 100644
--- a/board/gw8260/flash.c
+++ b/board/gw8260/flash.c
@@ -54,7 +54,7 @@
 #include <common.h>
 #include <mpc8260.h>
 
-flash_info_t flash_info[CFG_MAX_FLASH_BANKS];
+flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];
 
 static ulong flash_get_size (vu_long *addr, flash_info_t *info);
 static int write_word (flash_info_t *info, ulong dest, ulong data);
@@ -82,35 +82,35 @@ unsigned long flash_init (void)
     int i;
 
     /* Init: no FLASHes known */
-    for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) {
+    for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
 	flash_info[i].flash_id = FLASH_UNKNOWN;
     }
 
     /* for now, only support the 4 MB Flash SIMM */
-    size = flash_get_size((vu_long *)CFG_FLASH0_BASE, &flash_info[0]);
+    size = flash_get_size((vu_long *)CONFIG_SYS_FLASH0_BASE, &flash_info[0]);
 
     /*
      * protect monitor and environment sectors
      */
 
-#if CFG_MONITOR_BASE >= CFG_FLASH0_BASE
+#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH0_BASE
     flash_protect(FLAG_PROTECT_SET,
-		  CFG_MONITOR_BASE,
-		  CFG_MONITOR_BASE+monitor_flash_len-1,
+		  CONFIG_SYS_MONITOR_BASE,
+		  CONFIG_SYS_MONITOR_BASE+monitor_flash_len-1,
 		  &flash_info[0]);
 #endif
 
-#if (CFG_ENV_IS_IN_FLASH == 1) && defined(CFG_ENV_ADDR)
-# ifndef  CFG_ENV_SIZE
-#  define CFG_ENV_SIZE	CFG_ENV_SECT_SIZE
+#if defined(CONFIG_ENV_IS_IN_FLASH) && defined(CONFIG_ENV_ADDR)
+# ifndef  CONFIG_ENV_SIZE
+#  define CONFIG_ENV_SIZE	CONFIG_ENV_SECT_SIZE
 # endif
     flash_protect(FLAG_PROTECT_SET,
-		  CFG_ENV_ADDR,
-		  CFG_ENV_ADDR + CFG_ENV_SIZE - 1,
+		  CONFIG_ENV_ADDR,
+		  CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1,
 		  &flash_info[0]);
 #endif
 
-    return (CFG_FLASH0_SIZE * 1024 * 1024);  /*size*/
+    return (CONFIG_SYS_FLASH0_SIZE * 1024 * 1024);  /*size*/
 }
 
 /*********************************************************************/
@@ -357,7 +357,7 @@ int flash_erase (flash_info_t *info, int s_first, int s_last)
     last  = start;
     addr = (vu_long*)(info->start[l_sect]);
     while ((addr[0] & 0x80808080) != 0x80808080) {
-	if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+	if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
 	    printf ("Timeout\n");
 	    return 1;
 	}
@@ -512,7 +512,7 @@ static int write_word (flash_info_t *info, ulong dest, ulong data)
     /* data polling for D7 */
     start = get_timer (0);
     while ((*((vu_long *)dest) & 0x80808080) != (data & 0x80808080)) {
-	if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+	if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
 	    return (1);
 	}
     }
diff --git a/board/gw8260/gw8260.c b/board/gw8260/gw8260.c
index 42c9e0d10..28f5ca99e 100644
--- a/board/gw8260/gw8260.c
+++ b/board/gw8260/gw8260.c
@@ -226,7 +226,7 @@ int checkboard (void)
 }
 
 
-#if defined (CFG_DRAM_TEST)
+#if defined (CONFIG_SYS_DRAM_TEST)
 /*********************************************************************/
 /* NAME:  move64() -  moves a double word (64-bit)		     */
 /*								     */
@@ -256,7 +256,7 @@ static void move64 (unsigned long long *src, unsigned long long *dest)
 }
 
 
-#if defined (CFG_DRAM_TEST_DATA)
+#if defined (CONFIG_SYS_DRAM_TEST_DATA)
 
 unsigned long long pattern[] = {
 	0xaaaaaaaaaaaaaaaaULL,
@@ -319,7 +319,7 @@ unsigned long long pattern[] = {
 /*********************************************************************/
 int mem_test_data (void)
 {
-	unsigned long long *pmem = (unsigned long long *) CFG_SDRAM_BASE;
+	unsigned long long *pmem = (unsigned long long *) CONFIG_SYS_SDRAM_BASE;
 	unsigned long long temp64 = 0;
 	int num_patterns = sizeof (pattern) / sizeof (pattern[0]);
 	int i;
@@ -346,9 +346,9 @@ int mem_test_data (void)
 
 	return 0;
 }
-#endif /* CFG_DRAM_TEST_DATA */
+#endif /* CONFIG_SYS_DRAM_TEST_DATA */
 
-#if defined (CFG_DRAM_TEST_ADDRESS)
+#if defined (CONFIG_SYS_DRAM_TEST_ADDRESS)
 /*********************************************************************/
 /* NAME:  mem_test_address() -	test address lines		     */
 /*								     */
@@ -373,8 +373,8 @@ int mem_test_data (void)
 int mem_test_address (void)
 {
 	volatile unsigned int *pmem =
-		(volatile unsigned int *) CFG_SDRAM_BASE;
-	const unsigned int size = (CFG_SDRAM_SIZE * 1024 * 1024) / 4;
+		(volatile unsigned int *) CONFIG_SYS_SDRAM_BASE;
+	const unsigned int size = (CONFIG_SYS_SDRAM_SIZE * 1024 * 1024) / 4;
 	unsigned int i;
 
 	/* write address to each location */
@@ -391,9 +391,9 @@ int mem_test_address (void)
 	}
 	return 0;
 }
-#endif /* CFG_DRAM_TEST_ADDRESS */
+#endif /* CONFIG_SYS_DRAM_TEST_ADDRESS */
 
-#if defined (CFG_DRAM_TEST_WALK)
+#if defined (CONFIG_SYS_DRAM_TEST_WALK)
 /*********************************************************************/
 /* NAME:   mem_march() -  memory march				     */
 /*								     */
@@ -451,7 +451,7 @@ int mem_march (volatile unsigned long long *base,
 	}
 	return 0;
 }
-#endif /* CFG_DRAM_TEST_WALK */
+#endif /* CONFIG_SYS_DRAM_TEST_WALK */
 
 /*********************************************************************/
 /* NAME:   mem_test_walk() -  a simple walking ones test	     */
@@ -483,8 +483,8 @@ int mem_test_walk (void)
 {
 	unsigned long long mask;
 	volatile unsigned long long *pmem =
-		(volatile unsigned long long *) CFG_SDRAM_BASE;
-	const unsigned long size = (CFG_SDRAM_SIZE * 1024 * 1024) / 8;
+		(volatile unsigned long long *) CONFIG_SYS_SDRAM_BASE;
+	const unsigned long size = (CONFIG_SYS_SDRAM_SIZE * 1024 * 1024) / 8;
 
 	unsigned int i;
 
@@ -557,21 +557,21 @@ int testdram (void)
 	if ((rundata == 1) || (runaddress == 1) || (runwalk == 1)) {
 		printf ("Testing RAM ... ");
 	}
-#ifdef CFG_DRAM_TEST_DATA
+#ifdef CONFIG_SYS_DRAM_TEST_DATA
 	if (rundata == 1) {
 		if (mem_test_data () == 1) {
 			return 1;
 		}
 	}
 #endif
-#ifdef CFG_DRAM_TEST_ADDRESS
+#ifdef CONFIG_SYS_DRAM_TEST_ADDRESS
 	if (runaddress == 1) {
 		if (mem_test_address () == 1) {
 			return 1;
 		}
 	}
 #endif
-#ifdef CFG_DRAM_TEST_WALK
+#ifdef CONFIG_SYS_DRAM_TEST_WALK
 	if (runwalk == 1) {
 		if (mem_test_walk () == 1) {
 			return 1;
@@ -584,7 +584,7 @@ int testdram (void)
 	return 0;
 
 }
-#endif /* CFG_DRAM_TEST */
+#endif /* CONFIG_SYS_DRAM_TEST */
 
 /*********************************************************************/
 /* NAME: initdram() -  initializes SDRAM controller		     */
@@ -593,11 +593,11 @@ int testdram (void)
 /*   Initializes the MPC8260's SDRAM controller.		     */
 /*								     */
 /* INPUTS:							     */
-/*   CFG_IMMR	    -  MPC8260 Internal memory map		     */
-/*   CFG_SDRAM_BASE -  Physical start address of SDRAM		     */
-/*   CFG_PSDMR -       SDRAM mode register			     */
-/*   CFG_MPTPR -       Memory refresh timer prescaler register	     */
-/*   CFG_SDRAM0_SIZE - SDRAM size				     */
+/*   CONFIG_SYS_IMMR	    -  MPC8260 Internal memory map		     */
+/*   CONFIG_SYS_SDRAM_BASE -  Physical start address of SDRAM		     */
+/*   CONFIG_SYS_PSDMR -       SDRAM mode register			     */
+/*   CONFIG_SYS_MPTPR -       Memory refresh timer prescaler register	     */
+/*   CONFIG_SYS_SDRAM0_SIZE - SDRAM size				     */
 /*								     */
 /* RETURNS:							     */
 /*   SDRAM size in bytes					     */
@@ -608,10 +608,10 @@ int testdram (void)
 /*********************************************************************/
 phys_size_t initdram (int board_type)
 {
-	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
 	volatile memctl8260_t *memctl = &immap->im_memctl;
-	volatile uchar c = 0, *ramaddr = (uchar *) (CFG_SDRAM_BASE + 0x8);
-	ulong psdmr = CFG_PSDMR;
+	volatile uchar c = 0, *ramaddr = (uchar *) (CONFIG_SYS_SDRAM_BASE + 0x8);
+	ulong psdmr = CONFIG_SYS_PSDMR;
 	int i;
 
 	/*
@@ -631,11 +631,11 @@ phys_size_t initdram (int board_type)
 	 *  accessing the SDRAM with a single-byte transaction."
 	 *
 	 * The appropriate BRx/ORx registers have already been set when we
-	 * get here. The SDRAM can be accessed at the address CFG_SDRAM_BASE.
+	 * get here. The SDRAM can be accessed at the address CONFIG_SYS_SDRAM_BASE.
 	 */
 
-	memctl->memc_psrt = CFG_PSRT;
-	memctl->memc_mptpr = CFG_MPTPR;
+	memctl->memc_psrt = CONFIG_SYS_PSRT;
+	memctl->memc_mptpr = CONFIG_SYS_MPTPR;
 
 	memctl->memc_psdmr = psdmr | PSDMR_OP_PREA;
 	*ramaddr = c;
@@ -651,7 +651,7 @@ phys_size_t initdram (int board_type)
 	*ramaddr = c;
 
 	/* return total ram size */
-	return (CFG_SDRAM0_SIZE * 1024 * 1024);
+	return (CONFIG_SYS_SDRAM0_SIZE * 1024 * 1024);
 }
 
 /*********************************************************************/
diff --git a/board/hermes/flash.c b/board/hermes/flash.c
index 799fe83f3..888231c5f 100644
--- a/board/hermes/flash.c
+++ b/board/hermes/flash.c
@@ -24,7 +24,7 @@
 #include <common.h>
 #include <mpc8xx.h>
 
-flash_info_t	flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips	*/
+flash_info_t	flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips	*/
 
 /*-----------------------------------------------------------------------
  * Functions
@@ -38,13 +38,13 @@ static void flash_get_offsets (ulong base, flash_info_t *info);
 
 unsigned long flash_init (void)
 {
-	volatile immap_t     *immap  = (immap_t *)CFG_IMMR;
+	volatile immap_t     *immap  = (immap_t *)CONFIG_SYS_IMMR;
 	volatile memctl8xx_t *memctl = &immap->im_memctl;
 	unsigned long size;
 	int i;
 
 	/* Init: no FLASHes known */
-	for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) {
+	for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
 		flash_info[i].flash_id = FLASH_UNKNOWN;
 	}
 
@@ -58,20 +58,20 @@ unsigned long flash_init (void)
 	}
 
 	/* Remap FLASH according to real size */
-	memctl->memc_or0 = CFG_OR_TIMING_FLASH | (-size & 0xFFFF8000);
-	memctl->memc_br0 = (CFG_FLASH_BASE & BR_BA_MSK) |
+	memctl->memc_or0 = CONFIG_SYS_OR_TIMING_FLASH | (-size & 0xFFFF8000);
+	memctl->memc_br0 = (CONFIG_SYS_FLASH_BASE & BR_BA_MSK) |
 				(memctl->memc_br0 & ~(BR_BA_MSK));
 
 	/* Re-do sizing to get full correct info */
-	size = flash_get_size((vu_long *)CFG_FLASH_BASE, &flash_info[0]);
+	size = flash_get_size((vu_long *)CONFIG_SYS_FLASH_BASE, &flash_info[0]);
 
-	flash_get_offsets (CFG_FLASH_BASE, &flash_info[0]);
+	flash_get_offsets (CONFIG_SYS_FLASH_BASE, &flash_info[0]);
 
-#if CFG_MONITOR_BASE >= CFG_FLASH_BASE
+#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE
 	/* monitor protection ON by default */
 	flash_protect(FLAG_PROTECT_SET,
-		      CFG_MONITOR_BASE,
-		      CFG_MONITOR_BASE+monitor_flash_len-1,
+		      CONFIG_SYS_MONITOR_BASE,
+		      CONFIG_SYS_MONITOR_BASE+monitor_flash_len-1,
 		      &flash_info[0]);
 #endif
 
@@ -376,7 +376,7 @@ int	flash_erase (flash_info_t *info, int s_first, int s_last)
 	last  = start;
 	addr = (vu_char*)(info->start[l_sect]);
 	while ((addr[0] & 0x80) != 0x80) {
-		if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+		if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
 			printf ("Timeout\n");
 			return 1;
 		}
@@ -449,7 +449,7 @@ static int write_byte (flash_info_t *info, ulong dest, uchar data)
 	/* data polling for D7 */
 	start = get_timer (0);
 	while ((*((vu_char *)dest) & 0x80) != (data & 0x80)) {
-		if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+		if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
 			return (1);
 		}
 	}
diff --git a/board/hermes/hermes.c b/board/hermes/hermes.c
index f9b57204f..9a3e5f669 100644
--- a/board/hermes/hermes.c
+++ b/board/hermes/hermes.c
@@ -136,7 +136,7 @@ int checkboard (void)
 
 phys_size_t initdram (int board_type)
 {
-	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
 	volatile memctl8xx_t *memctl = &immap->im_memctl;
 	long int size, size8, size9;
 
@@ -153,8 +153,8 @@ phys_size_t initdram (int board_type)
 	/*
 	 * Map controller banks 1 to the SDRAM banks at preliminary address
 	 */
-	memctl->memc_or1 = CFG_OR1_PRELIM;
-	memctl->memc_br1 = CFG_BR1_PRELIM;
+	memctl->memc_or1 = CONFIG_SYS_OR1_PRELIM;
+	memctl->memc_br1 = CONFIG_SYS_BR1_PRELIM;
 
 	/* HERMES-PRO boards have only one bank SDRAM */
 
@@ -179,7 +179,7 @@ phys_size_t initdram (int board_type)
 	 *
 	 * try 8 column mode
 	 */
-	size8 = dram_size (CFG_MAMR_8COL, (long *) SDRAM_BASE_PRELIM,
+	size8 = dram_size (CONFIG_SYS_MAMR_8COL, (long *) SDRAM_BASE_PRELIM,
 					   SDRAM_MAX_SIZE);
 
 	udelay (1000);
@@ -187,7 +187,7 @@ phys_size_t initdram (int board_type)
 	/*
 	 * try 9 column mode
 	 */
-	size9 = dram_size (CFG_MAMR_9COL, (long *) SDRAM_BASE_PRELIM,
+	size9 = dram_size (CONFIG_SYS_MAMR_9COL, (long *) SDRAM_BASE_PRELIM,
 					   SDRAM_MAX_SIZE);
 
 	if (size8 < size9) {		/* leave configuration at 9 columns */
@@ -195,7 +195,7 @@ phys_size_t initdram (int board_type)
 /*	debug ("SDRAM Bank 0 in 9 column mode: %ld MB\n", size >> 20);	*/
 	} else {					/* back to 8 columns            */
 		size = size8;
-		memctl->memc_mamr = CFG_MAMR_8COL;
+		memctl->memc_mamr = CONFIG_SYS_MAMR_8COL;
 		udelay (500);
 /*	debug ("SDRAM Bank 0 in 8 column mode: %ld MB\n", size >> 20);	*/
 	}
@@ -203,7 +203,7 @@ phys_size_t initdram (int board_type)
 	udelay (1000);
 
 	memctl->memc_or1 = ((-size) & 0xFFFF0000) | SDRAM_TIMING;
-	memctl->memc_br1 = (CFG_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V;
+	memctl->memc_br1 = (CONFIG_SYS_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V;
 
 	udelay (10000);
 
@@ -223,7 +223,7 @@ phys_size_t initdram (int board_type)
 static long int dram_size (long int mamr_value, long int *base,
 						   long int maxsize)
 {
-	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
 	volatile memctl8xx_t *memctl = &immap->im_memctl;
 
 	memctl->memc_mamr = mamr_value;
@@ -264,7 +264,7 @@ static long int dram_size (long int mamr_value, long int *base,
 
 static ulong board_init (void)
 {
-	volatile immap_t *immr = (immap_t *) CFG_IMMR;
+	volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
 	ulong reg, revision, speed = 100;
 	int ethspeed;
 	char *s;
@@ -403,7 +403,7 @@ static ulong board_init (void)
  */
 void hermes_start_lxt980 (int speed)
 {
-	volatile immap_t *immr = (immap_t *) CFG_IMMR;
+	volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
 	volatile cpm8xx_t *cp = (cpm8xx_t *) & (immr->im_cpm);
 	volatile scc_t *sp = (scc_t *) & (cp->cp_scc[SCC_SM]);
 	volatile cbd_t *bd;
@@ -595,7 +595,7 @@ static void send_smi_frame (volatile scc_t * sp, volatile cbd_t * bd,
 
 void show_boot_progress (int status)
 {
-	volatile immap_t *immr = (immap_t *) CFG_IMMR;
+	volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
 
 	if (status < -32) status = -1;	/* let things compatible */
 	status ^= 0x0F;
diff --git a/board/hermes/u-boot.lds b/board/hermes/u-boot.lds
index 5f5fb0d58..540e614fc 100644
--- a/board/hermes/u-boot.lds
+++ b/board/hermes/u-boot.lds
@@ -63,7 +63,7 @@ SECTIONS
     lib_ppc/cache.o		(.text)
     lib_generic/crc32.o		(.text)
     . = env_offset;
-    common/environment.o(.text)
+    common/env_embedded.o(.text)
 
     *(.text)
     *(.fixup)
@@ -134,6 +134,7 @@ SECTIONS
    *(.dynbss)
    *(.bss)
    *(COMMON)
+   . = ALIGN(4);
   }
   _end = . ;
   PROVIDE (end = .);
diff --git a/board/hermes/u-boot.lds.debug b/board/hermes/u-boot.lds.debug
index 41d603f7e..78456e6d8 100644
--- a/board/hermes/u-boot.lds.debug
+++ b/board/hermes/u-boot.lds.debug
@@ -61,7 +61,7 @@ SECTIONS
     lib_ppc/time.o		(.text)
     lib_ppc/ticks.o		(.text)
     . = env_offset;
-    common/environment.o(.text)
+    common/env_embedded.o(.text)
 
     *(.text)
     *(.fixup)
diff --git a/board/hidden_dragon/early_init.S b/board/hidden_dragon/early_init.S
index 07dafb716..531dcdf4a 100644
--- a/board/hidden_dragon/early_init.S
+++ b/board/hidden_dragon/early_init.S
@@ -32,68 +32,68 @@
 
 #if defined(USE_DINK32)
   /* We are running from RAM, so do not clear the MCCR1_MEMGO bit! */
-  #define MCCR1VAL ((CFG_ROMNAL << MCCR1_ROMNAL_SHIFT) | (CFG_ROMFAL << MCCR1_ROMFAL_SHIFT) | MCCR1_MEMGO)
+  #define MCCR1VAL ((CONFIG_SYS_ROMNAL << MCCR1_ROMNAL_SHIFT) | (CONFIG_SYS_ROMFAL << MCCR1_ROMFAL_SHIFT) | MCCR1_MEMGO)
 #else
-  #define MCCR1VAL (CFG_ROMNAL << MCCR1_ROMNAL_SHIFT) | (CFG_ROMFAL << MCCR1_ROMFAL_SHIFT)
+  #define MCCR1VAL (CONFIG_SYS_ROMNAL << MCCR1_ROMNAL_SHIFT) | (CONFIG_SYS_ROMFAL << MCCR1_ROMFAL_SHIFT)
 #endif
 
 	.text
 
 	/* Values to program into memory controller registers */
 tbl:	.long	MCCR1, MCCR1VAL
-	.long	MCCR2, CFG_REFINT << MCCR2_REFINT_SHIFT
+	.long	MCCR2, CONFIG_SYS_REFINT << MCCR2_REFINT_SHIFT
 	.long	MCCR3
-	.long	(((CFG_BSTOPRE & 0x000000f0) >> 4) << MCCR3_BSTOPRE2TO5_SHIFT) | \
-		(CFG_REFREC << MCCR3_REFREC_SHIFT) | \
-		(CFG_RDLAT  << MCCR3_RDLAT_SHIFT)
+	.long	(((CONFIG_SYS_BSTOPRE & 0x000000f0) >> 4) << MCCR3_BSTOPRE2TO5_SHIFT) | \
+		(CONFIG_SYS_REFREC << MCCR3_REFREC_SHIFT) | \
+		(CONFIG_SYS_RDLAT  << MCCR3_RDLAT_SHIFT)
 	.long	MCCR4
-	.long	(CFG_PRETOACT << MCCR4_PRETOACT_SHIFT) | (CFG_ACTTOPRE << MCCR4_ACTTOPRE_SHIFT) | \
-		(CFG_REGISTERD_TYPE_BUFFER << 20) | \
-		(((CFG_BSTOPRE & 0x00000300) >> 8) << MCCR4_BSTOPRE0TO1_SHIFT ) | \
-		((CFG_SDMODE_CAS_LAT << 4) | (CFG_SDMODE_WRAP << 3) | \
-		(CFG_SDMODE_BURSTLEN) << MCCR4_SDMODE_SHIFT) | \
-		(CFG_ACTTORW << MCCR4_ACTTORW_SHIFT) | \
-		((CFG_BSTOPRE & 0x0000000f) << MCCR4_BSTOPRE6TO9_SHIFT )
+	.long	(CONFIG_SYS_PRETOACT << MCCR4_PRETOACT_SHIFT) | (CONFIG_SYS_ACTTOPRE << MCCR4_ACTTOPRE_SHIFT) | \
+		(CONFIG_SYS_REGISTERD_TYPE_BUFFER << 20) | \
+		(((CONFIG_SYS_BSTOPRE & 0x00000300) >> 8) << MCCR4_BSTOPRE0TO1_SHIFT ) | \
+		((CONFIG_SYS_SDMODE_CAS_LAT << 4) | (CONFIG_SYS_SDMODE_WRAP << 3) | \
+		(CONFIG_SYS_SDMODE_BURSTLEN) << MCCR4_SDMODE_SHIFT) | \
+		(CONFIG_SYS_ACTTORW << MCCR4_ACTTORW_SHIFT) | \
+		((CONFIG_SYS_BSTOPRE & 0x0000000f) << MCCR4_BSTOPRE6TO9_SHIFT )
 	.long	MSAR1
-	.long	(((CFG_BANK0_START & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) <<  0) | \
-		(((CFG_BANK1_START & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) <<  8) | \
-		(((CFG_BANK2_START & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 16) | \
-		(((CFG_BANK3_START & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 24)
+	.long	(((CONFIG_SYS_BANK0_START & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) <<  0) | \
+		(((CONFIG_SYS_BANK1_START & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) <<  8) | \
+		(((CONFIG_SYS_BANK2_START & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 16) | \
+		(((CONFIG_SYS_BANK3_START & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 24)
 	.long	EMSAR1
-	.long	(((CFG_BANK0_START & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) <<  0) | \
-		(((CFG_BANK1_START & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) <<  8) | \
-		(((CFG_BANK2_START & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 16) | \
-		(((CFG_BANK3_START & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 24)
+	.long	(((CONFIG_SYS_BANK0_START & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) <<  0) | \
+		(((CONFIG_SYS_BANK1_START & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) <<  8) | \
+		(((CONFIG_SYS_BANK2_START & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 16) | \
+		(((CONFIG_SYS_BANK3_START & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 24)
 	.long	MSAR2
-	.long	(((CFG_BANK4_START & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) <<  0) | \
-		(((CFG_BANK5_START & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) <<  8) | \
-		(((CFG_BANK6_START & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 16) | \
-		(((CFG_BANK7_START & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 24)
+	.long	(((CONFIG_SYS_BANK4_START & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) <<  0) | \
+		(((CONFIG_SYS_BANK5_START & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) <<  8) | \
+		(((CONFIG_SYS_BANK6_START & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 16) | \
+		(((CONFIG_SYS_BANK7_START & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 24)
 	.long	EMSAR2
-	.long	(((CFG_BANK4_START & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) <<  0) | \
-		(((CFG_BANK5_START & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) <<  8) | \
-		(((CFG_BANK6_START & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 16) | \
-		(((CFG_BANK7_START & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 24)
+	.long	(((CONFIG_SYS_BANK4_START & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) <<  0) | \
+		(((CONFIG_SYS_BANK5_START & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) <<  8) | \
+		(((CONFIG_SYS_BANK6_START & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 16) | \
+		(((CONFIG_SYS_BANK7_START & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 24)
 	.long	MEAR1
-	.long	(((CFG_BANK0_END & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) <<  0) | \
-		(((CFG_BANK1_END & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) <<  8) | \
-		(((CFG_BANK2_END & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 16) | \
-		(((CFG_BANK3_END & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 24)
+	.long	(((CONFIG_SYS_BANK0_END & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) <<  0) | \
+		(((CONFIG_SYS_BANK1_END & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) <<  8) | \
+		(((CONFIG_SYS_BANK2_END & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 16) | \
+		(((CONFIG_SYS_BANK3_END & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 24)
 	.long	EMEAR1
-	.long	(((CFG_BANK0_END & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) <<  0) | \
-		(((CFG_BANK1_END & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) <<  8) | \
-		(((CFG_BANK2_END & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 16) | \
-		(((CFG_BANK3_END & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 24)
+	.long	(((CONFIG_SYS_BANK0_END & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) <<  0) | \
+		(((CONFIG_SYS_BANK1_END & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) <<  8) | \
+		(((CONFIG_SYS_BANK2_END & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 16) | \
+		(((CONFIG_SYS_BANK3_END & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 24)
 	.long	MEAR2
-	.long	(((CFG_BANK4_END & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) <<  0) | \
-		(((CFG_BANK5_END & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) <<  8) | \
-		(((CFG_BANK6_END & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 16) | \
-		(((CFG_BANK7_END & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 24)
+	.long	(((CONFIG_SYS_BANK4_END & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) <<  0) | \
+		(((CONFIG_SYS_BANK5_END & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) <<  8) | \
+		(((CONFIG_SYS_BANK6_END & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 16) | \
+		(((CONFIG_SYS_BANK7_END & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 24)
 	.long	EMEAR2
-	.long	(((CFG_BANK4_END & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) <<  0) | \
-		(((CFG_BANK5_END & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) <<  8) | \
-		(((CFG_BANK6_END & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 16) | \
-		(((CFG_BANK7_END & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 24)
+	.long	(((CONFIG_SYS_BANK4_END & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) <<  0) | \
+		(((CONFIG_SYS_BANK5_END & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) <<  8) | \
+		(((CONFIG_SYS_BANK6_END & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 16) | \
+		(((CONFIG_SYS_BANK7_END & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 24)
 	.long	0
 
 
@@ -123,7 +123,7 @@ loop:	lwz	r1, 4(r5)
 	/* set bank enable bits */
 	lis	r0, MBER@h
 	ori	r0, 0, MBER@l
-	li	r1, CFG_BANK_ENABLE
+	li	r1, CONFIG_SYS_BANK_ENABLE
 	stwbrx	r0, 0, r3
 	eieio
 	stb	r1, 0(r4)
@@ -145,8 +145,8 @@ delay:	bdnz	delay
 	eieio
 
 	/* set up stack pointer */
-	lis	r1, CFG_INIT_SP_OFFSET@h
-	ori	r1, r1, CFG_INIT_SP_OFFSET@l
+	lis	r1, CONFIG_SYS_INIT_SP_OFFSET@h
+	ori	r1, r1, CONFIG_SYS_INIT_SP_OFFSET@l
 
 	mtlr	r10
 	blr
diff --git a/board/hidden_dragon/flash.c b/board/hidden_dragon/flash.c
index 21c5a01c1..2ce1dc4fb 100644
--- a/board/hidden_dragon/flash.c
+++ b/board/hidden_dragon/flash.c
@@ -33,17 +33,17 @@
 #define ROM_CS0_START	0xFF800000
 #define ROM_CS1_START	0xFF000000
 
-flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips    */
+flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips    */
 
-#if defined(CFG_ENV_IS_IN_FLASH)
-# ifndef  CFG_ENV_ADDR
-#  define CFG_ENV_ADDR  (CFG_FLASH_BASE + CFG_ENV_OFFSET)
+#if defined(CONFIG_ENV_IS_IN_FLASH)
+# ifndef  CONFIG_ENV_ADDR
+#  define CONFIG_ENV_ADDR  (CONFIG_SYS_FLASH_BASE + CONFIG_ENV_OFFSET)
 # endif
-# ifndef  CFG_ENV_SIZE
-#  define CFG_ENV_SIZE  CFG_ENV_SECT_SIZE
+# ifndef  CONFIG_ENV_SIZE
+#  define CONFIG_ENV_SIZE  CONFIG_ENV_SECT_SIZE
 # endif
-# ifndef  CFG_ENV_SECT_SIZE
-#  define CFG_ENV_SECT_SIZE  CFG_ENV_SIZE
+# ifndef  CONFIG_ENV_SECT_SIZE
+#  define CONFIG_ENV_SECT_SIZE  CONFIG_ENV_SIZE
 # endif
 #endif
 
@@ -120,10 +120,10 @@ unsigned long flash_init (void)
 {
 	unsigned long i;
 	unsigned char j;
-	static const ulong flash_banks[] = CFG_FLASH_BANKS;
+	static const ulong flash_banks[] = CONFIG_SYS_FLASH_BANKS;
 
 	/* Init: no FLASHes known */
-	for (i = 0; i < CFG_MAX_FLASH_BANKS; i++) {
+	for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) {
 		flash_info_t *const pflinfo = &flash_info[i];
 
 		pflinfo->flash_id = FLASH_UNKNOWN;
@@ -135,10 +135,10 @@ unsigned long flash_init (void)
 	{
 		register unsigned char temp;
 
-		CONFIG_READ_BYTE (CFG_WINBOND_ISA_CFG_ADDR + WINBOND_CSCR,
+		CONFIG_READ_BYTE (CONFIG_SYS_WINBOND_ISA_CFG_ADDR + WINBOND_CSCR,
 				  temp);
 		temp &= ~0x20;	/* clear BIOSWP bit */
-		CONFIG_WRITE_BYTE (CFG_WINBOND_ISA_CFG_ADDR + WINBOND_CSCR,
+		CONFIG_WRITE_BYTE (CONFIG_SYS_WINBOND_ISA_CFG_ADDR + WINBOND_CSCR,
 				   temp);
 	}
 
@@ -205,17 +205,17 @@ unsigned long flash_init (void)
 		}
 		/* Protect monitor and environment sectors
 		 */
-#if CFG_MONITOR_BASE >= CFG_FLASH_BASE
+#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE
 		flash_protect (FLAG_PROTECT_SET,
-			       CFG_MONITOR_BASE,
-			       CFG_MONITOR_BASE + monitor_flash_len - 1,
+			       CONFIG_SYS_MONITOR_BASE,
+			       CONFIG_SYS_MONITOR_BASE + monitor_flash_len - 1,
 			       &flash_info[0]);
 #endif
 
-#if (CFG_ENV_IS_IN_FLASH == 1) && defined(CFG_ENV_ADDR)
+#if defined(CONFIG_ENV_IS_IN_FLASH) && defined(CONFIG_ENV_ADDR)
 		flash_protect (FLAG_PROTECT_SET,
-			       CFG_ENV_ADDR,
-			       CFG_ENV_ADDR + CFG_ENV_SIZE - 1,
+			       CONFIG_ENV_ADDR,
+			       CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1,
 			       &flash_info[0]);
 #endif
 
@@ -426,7 +426,7 @@ int flash_erase (flash_info_t * info, int s_first, int s_last)
 						       start[0]) << sh8b));
 	while ((addr[0] & (FLASH_WORD_SIZE) 0x00800080) !=
 	       (FLASH_WORD_SIZE) 0x00800080) {
-		if ((now = get_timer (start)) > CFG_FLASH_ERASE_TOUT) {
+		if ((now = get_timer (start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
 			printf ("Timeout\n");
 			return 1;
 		}
@@ -565,7 +565,7 @@ static int write_word (flash_info_t * info, ulong dest, ulong data)
 		start = get_timer (0);
 		while ((dest2[i << sh8b] & (FLASH_WORD_SIZE) 0x00800080) !=
 		       (data2[i] & (FLASH_WORD_SIZE) 0x00800080)) {
-			if (get_timer (start) > CFG_FLASH_WRITE_TOUT) {
+			if (get_timer (start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
 				return (1);
 			}
 		}
diff --git a/board/hidden_dragon/hidden_dragon.c b/board/hidden_dragon/hidden_dragon.c
index 5713a3384..027aa457f 100644
--- a/board/hidden_dragon/hidden_dragon.c
+++ b/board/hidden_dragon/hidden_dragon.c
@@ -27,6 +27,7 @@
 #include <common.h>
 #include <mpc824x.h>
 #include <pci.h>
+#include <netdev.h>
 
 int checkboard (void)
 {
@@ -51,7 +52,7 @@ phys_size_t initdram (int board_type)
 	long mear1;
 	long emear1;
 
-	size = get_ram_size(CFG_SDRAM_BASE, CFG_MAX_RAM_SIZE);
+	size = get_ram_size(CONFIG_SYS_SDRAM_BASE, CONFIG_SYS_MAX_RAM_SIZE);
 
 	new_bank0_end = size - 1;
 	mear1 = mpc824x_mpc107_getreg(MEAR1);
@@ -93,3 +94,8 @@ void pci_init_board(void)
 {
 	pci_mpc824x_init(&hose);
 }
+
+int board_eth_init(bd_t *bis)
+{
+	return pci_eth_init(bis);
+}
diff --git a/board/hmi1001/hmi1001.c b/board/hmi1001/hmi1001.c
index 8cfd75bd8..9cbed4b8c 100644
--- a/board/hmi1001/hmi1001.c
+++ b/board/hmi1001/hmi1001.c
@@ -33,7 +33,7 @@
 #include <asm/processor.h>
 #include <malloc.h>
 
-#ifndef CFG_RAMBOOT
+#ifndef CONFIG_SYS_RAMBOOT
 static void sdram_start (int hi_addr)
 {
 	long hi_addr_bit = hi_addr ? 0x01000000 : 0;
@@ -76,14 +76,14 @@ static void sdram_start (int hi_addr)
 
 /*
  * ATTENTION: Although partially referenced initdram does NOT make real use
- *	      use of CFG_SDRAM_BASE. The code does not work if CFG_SDRAM_BASE
+ *	      use of CONFIG_SYS_SDRAM_BASE. The code does not work if CONFIG_SYS_SDRAM_BASE
  *	      is something else than 0x00000000.
  */
 
 phys_size_t initdram (int board_type)
 {
 	ulong dramsize = 0;
-#ifndef CFG_RAMBOOT
+#ifndef CONFIG_SYS_RAMBOOT
 	ulong test1, test2;
 	uint svr, pvr;
 
@@ -105,9 +105,9 @@ phys_size_t initdram (int board_type)
 
 	/* find RAM size using SDRAM CS0 only */
 	sdram_start(0);
-	test1 = get_ram_size((long *)CFG_SDRAM_BASE, 0x20000000);
+	test1 = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE, 0x20000000);
 	sdram_start(1);
-	test2 = get_ram_size((long *)CFG_SDRAM_BASE, 0x20000000);
+	test2 = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE, 0x20000000);
 	if (test1 > test2) {
 		sdram_start(0);
 		dramsize = test1;
@@ -129,7 +129,7 @@ phys_size_t initdram (int board_type)
 	}
 
 	*(vu_long *)MPC5XXX_SDRAM_CS1CFG = dramsize; /* disabled */
-#else /* CFG_RAMBOOT */
+#else /* CONFIG_SYS_RAMBOOT */
 
 	/* retrieve size of memory connected to SDRAM CS0 */
 	dramsize = *(vu_long *)MPC5XXX_SDRAM_CS0CFG & 0xFF;
@@ -147,7 +147,7 @@ phys_size_t initdram (int board_type)
 		dramsize2 = 0;
 	}
 
-#endif /* CFG_RAMBOOT */
+#endif /* CONFIG_SYS_RAMBOOT */
 
 	/*
 	 * On MPC5200B we need to set the special configuration delay in the
@@ -193,8 +193,8 @@ struct kbd_data_t {
 
 struct kbd_data_t* get_keys (struct kbd_data_t *kbd_data)
 {
-	kbd_data->s1 = *((volatile uchar*)(CFG_STATUS1_BASE));
-	kbd_data->s2 = *((volatile uchar*)(CFG_STATUS2_BASE));
+	kbd_data->s1 = *((volatile uchar*)(CONFIG_SYS_STATUS1_BASE));
+	kbd_data->s2 = *((volatile uchar*)(CONFIG_SYS_STATUS2_BASE));
 
 	return kbd_data;
 }
@@ -300,9 +300,9 @@ int board_early_init_r (void)
 {
 	*(vu_long *)MPC5XXX_BOOTCS_CFG &= ~0x1; /* clear RO */
 	*(vu_long *)MPC5XXX_BOOTCS_START =
-	*(vu_long *)MPC5XXX_CS0_START = START_REG(CFG_FLASH_BASE);
+	*(vu_long *)MPC5XXX_CS0_START = START_REG(CONFIG_SYS_FLASH_BASE);
 	*(vu_long *)MPC5XXX_BOOTCS_STOP =
-	*(vu_long *)MPC5XXX_CS0_STOP = STOP_REG(CFG_FLASH_BASE, CFG_FLASH_SIZE);
+	*(vu_long *)MPC5XXX_CS0_STOP = STOP_REG(CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_SIZE);
 	return 0;
 }
 #ifdef	CONFIG_PCI
diff --git a/board/hymod/bsp.c b/board/hymod/bsp.c
index 12f140201..1848bb3fc 100644
--- a/board/hymod/bsp.c
+++ b/board/hymod/bsp.c
@@ -304,7 +304,7 @@ int
 do_eecl (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
 {
 	uchar data[HYMOD_EEPROM_SIZE];
-	uint addr = CFG_I2C_EEPROM_ADDR;
+	uint addr = CONFIG_SYS_I2C_EEPROM_ADDR;
 
 	switch (argc) {
 
diff --git a/board/hymod/eeprom.c b/board/hymod/eeprom.c
index c9b9b1811..4d48d7dbb 100644
--- a/board/hymod/eeprom.c
+++ b/board/hymod/eeprom.c
@@ -36,7 +36,7 @@ static char *def_bddb_cfgdir = "/hymod/bddb";
 static int
 hymod_eeprom_load (int which, hymod_eeprom_t *ep)
 {
-	unsigned dev_addr = CFG_I2C_EEPROM_ADDR | \
+	unsigned dev_addr = CONFIG_SYS_I2C_EEPROM_ADDR | \
 		(which ? HYMOD_EEOFF_MEZZ : HYMOD_EEOFF_MAIN);
 	unsigned offset = 0;
 	uchar data[HYMOD_EEPROM_MAXLEN], *dp, *edp;
@@ -466,7 +466,7 @@ eerec_callback (uchar *name, uchar *val)
 static int
 hymod_eeprom_fetch(int which, char *filename, ulong addr)
 {
-	unsigned dev_addr = CFG_I2C_EEPROM_ADDR | \
+	unsigned dev_addr = CONFIG_SYS_I2C_EEPROM_ADDR | \
 		(which ? HYMOD_EEOFF_MEZZ : HYMOD_EEOFF_MAIN);
 	hymod_eehdr_t *hp = (hymod_eehdr_t *)&data[0];
 	ulong crc;
@@ -635,7 +635,7 @@ int
 hymod_eeprom_read (int which, hymod_eeprom_t *ep)
 {
 	char *label = which ? "mezzanine" : "main";
-	unsigned dev_addr = CFG_I2C_EEPROM_ADDR | \
+	unsigned dev_addr = CONFIG_SYS_I2C_EEPROM_ADDR | \
 		(which ? HYMOD_EEOFF_MEZZ : HYMOD_EEOFF_MAIN);
 	char filename[50], prompt[50], *dir;
 	int serno, count = 0, rc;
@@ -682,7 +682,7 @@ hymod_eeprom_read (int which, hymod_eeprom_t *ep)
 		printf ("*** fetching %s board EEPROM contents from server\n",
 			label);
 
-		rc = hymod_eeprom_fetch (which, filename, CFG_LOAD_ADDR);
+		rc = hymod_eeprom_fetch (which, filename, CONFIG_SYS_LOAD_ADDR);
 
 		if (rc == 0) {
 			puts ("*** fetch failed - ignoring eeprom contents\n");
diff --git a/board/hymod/env.c b/board/hymod/env.c
index 062553bfa..c0e2cd5d6 100644
--- a/board/hymod/env.c
+++ b/board/hymod/env.c
@@ -35,7 +35,7 @@ static int
 env_callback (uchar *name, uchar *value)
 {
 	hymod_conf_t *cp = &gd->bd->bi_hymod_conf;
-	char ov[CFG_CBSIZE], nv[CFG_CBSIZE], *p, *q, *nn, c, *curver, *newver;
+	char ov[CONFIG_SYS_CBSIZE], nv[CONFIG_SYS_CBSIZE], *p, *q, *nn, c, *curver, *newver;
 	int override = 1, append = 0, remove = 0, nnl, ovl, nvl;
 
 	nn = (char *)name;
@@ -205,7 +205,7 @@ hymod_check_env (void)
 	if ((path = getenv ("global_env_path")) == NULL || *path == '\0')
 		path = def_global_env_path;
 
-	if (fetch_and_parse (path, CFG_LOAD_ADDR, env_callback) == 0) {
+	if (fetch_and_parse (path, CONFIG_SYS_LOAD_ADDR, env_callback) == 0) {
 		puts ("*** Fetch of global environment failed!\n");
 		return;
 	}
diff --git a/board/hymod/flash.c b/board/hymod/flash.c
index ad0a229d9..e2cf38c8e 100644
--- a/board/hymod/flash.c
+++ b/board/hymod/flash.c
@@ -27,7 +27,7 @@
 #include <mpc8260.h>
 #include <board/hymod/flash.h>
 
-flash_info_t flash_info[CFG_MAX_FLASH_BANKS];	/* info for FLASH chips */
+flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];	/* info for FLASH chips */
 
 /*-----------------------------------------------------------------------
  * Protection Flags:
@@ -95,7 +95,7 @@ bank_probe (flash_info_t *fip, volatile bank_addr_t base)
 			(unsigned long)word, (unsigned long)base);
 	}
 
-	if (fip->sector_count >= CFG_MAX_FLASH_SECT)
+	if (fip->sector_count >= CONFIG_SYS_MAX_FLASH_SECT)
 		panic ("\ntoo many sectors (%d) in flash at address 0x%08lx",
 			fip->sector_count, (unsigned long)base);
 
@@ -198,7 +198,7 @@ bank_write_word (volatile bank_addr_t addr, bank_word_t value)
 	/* data polling for D7 */
 	start = get_timer (0);
 	do {
-		if (get_timer (start) > CFG_FLASH_WRITE_TOUT) {
+		if (get_timer (start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
 			retval = 1;
 			goto done;
 		}
@@ -228,30 +228,30 @@ flash_init (void)
 	int i;
 
 	/* Init: no FLASHes known */
-	for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) {
+	for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
 		flash_info[i].flash_id = FLASH_UNKNOWN;
 	}
 
-	bank_probe (&flash_info[0], (bank_addr_t)CFG_FLASH_BASE);
+	bank_probe (&flash_info[0], (bank_addr_t)CONFIG_SYS_FLASH_BASE);
 
 	/*
 	 * protect monitor and environment sectors
 	 */
 
-#if CFG_MONITOR_BASE == CFG_FLASH_BASE
+#if CONFIG_SYS_MONITOR_BASE == CONFIG_SYS_FLASH_BASE
 	(void)flash_protect (FLAG_PROTECT_SET,
-		      CFG_MONITOR_BASE,
-		      CFG_MONITOR_BASE+monitor_flash_len-1,
+		      CONFIG_SYS_MONITOR_BASE,
+		      CONFIG_SYS_MONITOR_BASE+monitor_flash_len-1,
 		      &flash_info[0]);
 #endif
 
-#if defined(CFG_FLASH_ENV_ADDR)
+#if defined(CONFIG_SYS_FLASH_ENV_ADDR)
 	(void)flash_protect (FLAG_PROTECT_SET,
-		      CFG_FLASH_ENV_ADDR,
-#if defined(CFG_FLASH_ENV_BUF)
-		      CFG_FLASH_ENV_ADDR + CFG_FLASH_ENV_BUF - 1,
+		      CONFIG_SYS_FLASH_ENV_ADDR,
+#if defined(CONFIG_SYS_FLASH_ENV_BUF)
+		      CONFIG_SYS_FLASH_ENV_ADDR + CONFIG_SYS_FLASH_ENV_BUF - 1,
 #else
-		      CFG_FLASH_ENV_ADDR + CFG_FLASH_ENV_SIZE - 1,
+		      CONFIG_SYS_FLASH_ENV_ADDR + CONFIG_SYS_FLASH_ENV_SIZE - 1,
 #endif
 		      &flash_info[0]);
 #endif
@@ -368,7 +368,7 @@ flash_erase (flash_info_t *info, int s_first, int s_last)
 			do {
 				now = get_timer (start);
 
-				if (now - estart > CFG_FLASH_ERASE_TOUT) {
+				if (now - estart > CONFIG_SYS_FLASH_ERASE_TOUT) {
 					printf ("Timeout (sect %d)\n", sect);
 					haderr = 1;
 					rcode = 1;
diff --git a/board/hymod/hymod.c b/board/hymod/hymod.c
index 91aaab1b0..2af304989 100644
--- a/board/hymod/hymod.c
+++ b/board/hymod/hymod.c
@@ -255,7 +255,7 @@ uchar fs6377_regs[16] = {
 int
 board_postclk_init (void)
 {
-	i2c_init (CFG_I2C_SPEED, CFG_I2C_SLAVE);
+	i2c_init (CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
 
 	/*
 	 * Initialise the FS6377 clock chip
@@ -347,16 +347,16 @@ uint upmc_table[] = {
 int
 misc_init_f (void)
 {
-	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
 	volatile memctl8260_t *memctl = &immap->im_memctl;
 
 	printf ("UPMs:  ");
 
 	upmconfig (UPMB, upmb_table, sizeof upmb_table / sizeof upmb_table[0]);
-	memctl->memc_mbmr = CFG_MBMR;
+	memctl->memc_mbmr = CONFIG_SYS_MBMR;
 
 	upmconfig (UPMC, upmc_table, sizeof upmc_table / sizeof upmc_table[0]);
-	memctl->memc_mcmr = CFG_MCMR;
+	memctl->memc_mcmr = CONFIG_SYS_MCMR;
 
 	printf ("configured\n");
 	return (0);
@@ -367,10 +367,10 @@ misc_init_f (void)
 phys_size_t
 initdram (int board_type)
 {
-	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
 	volatile memctl8260_t *memctl = &immap->im_memctl;
-	volatile uchar c = 0, *ramaddr = (uchar *) (CFG_SDRAM_BASE + 0x8);
-	ulong psdmr = CFG_PSDMR;
+	volatile uchar c = 0, *ramaddr = (uchar *) (CONFIG_SYS_SDRAM_BASE + 0x8);
+	ulong psdmr = CONFIG_SYS_PSDMR;
 	int i;
 
 	/*
@@ -390,11 +390,11 @@ initdram (int board_type)
 	 *  accessing the SDRAM with a single-byte transaction."
 	 *
 	 * The appropriate BRx/ORx registers have already been set when we
-	 * get here. The SDRAM can be accessed at the address CFG_SDRAM_BASE.
+	 * get here. The SDRAM can be accessed at the address CONFIG_SYS_SDRAM_BASE.
 	 */
 
-	memctl->memc_psrt = CFG_PSRT;
-	memctl->memc_mptpr = CFG_MPTPR;
+	memctl->memc_psrt = CONFIG_SYS_PSRT;
+	memctl->memc_mptpr = CONFIG_SYS_MPTPR;
 
 	memctl->memc_psdmr = psdmr | PSDMR_OP_PREA;
 	*ramaddr = c;
@@ -409,7 +409,7 @@ initdram (int board_type)
 	memctl->memc_psdmr = psdmr | PSDMR_OP_NORM | PSDMR_RFEN;
 	*ramaddr = c;
 
-	return (CFG_SDRAM_SIZE << 20);
+	return (CONFIG_SYS_SDRAM_SIZE << 20);
 }
 
 /* ------------------------------------------------------------------------- */
@@ -517,18 +517,18 @@ last_stage_init (void)
 #ifdef CONFIG_SHOW_ACTIVITY
 void board_show_activity (ulong timebase)
 {
-#ifdef CFG_HYMOD_DBLEDS
-	volatile immap_t *immr = (immap_t *) CFG_IMMR;
+#ifdef CONFIG_SYS_HYMOD_DBLEDS
+	volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
 	volatile iop8260_t *iop = &immr->im_ioport;
 	static int shift = 0;
 
-	if ((timestamp % CFG_HZ) == 0) {
+	if ((timestamp % CONFIG_SYS_HZ) == 0) {
 		if (++shift > 3)
 			shift = 0;
 		iop->iop_pdatd =
 				(iop->iop_pdatd & ~0x0f000000) | (1 << (24 + shift));
 	}
-#endif /* CFG_HYMOD_DBLEDS */
+#endif /* CONFIG_SYS_HYMOD_DBLEDS */
 }
 
 void show_activity(int arg)
diff --git a/board/hymod/input.c b/board/hymod/input.c
index 63aa13c4a..998132d65 100644
--- a/board/hymod/input.c
+++ b/board/hymod/input.c
@@ -24,7 +24,7 @@
 #include <common.h>
 
 /* imports from common/main.c */
-extern char console_buffer[CFG_CBSIZE];
+extern char console_buffer[CONFIG_SYS_CBSIZE];
 
 int
 hymod_get_serno (const char *prompt)
diff --git a/board/hymod/u-boot.lds b/board/hymod/u-boot.lds
index cb7b4ea06..fdd584dd8 100644
--- a/board/hymod/u-boot.lds
+++ b/board/hymod/u-boot.lds
@@ -65,7 +65,7 @@ SECTIONS
 
     . = env_offset;
 */
-    common/environment.o(.text)
+    common/env_embedded.o(.text)
 
     *(.text)
     *(.fixup)
@@ -140,8 +140,9 @@ SECTIONS
   . = ALIGN(256 * 1024);
   .ppcenv	:
   {
-    common/environment.o (.ppcenv)
+    common/env_embedded.o (.ppcenv)
   }
+  . = ALIGN(4);
   _end = . ;
   PROVIDE (end = .);
 }
diff --git a/board/hymod/u-boot.lds.debug b/board/hymod/u-boot.lds.debug
index c33581d25..ea8538900 100644
--- a/board/hymod/u-boot.lds.debug
+++ b/board/hymod/u-boot.lds.debug
@@ -61,7 +61,7 @@ SECTIONS
     lib_generic/crc32.o		(.text)
 
     . = env_offset;
-    common/environment.o(.text)
+    common/env_embedded.o(.text)
 
     *(.text)
     *(.fixup)
diff --git a/board/icecube/flash.c b/board/icecube/flash.c
index 2d4026a9d..7a433b3a3 100644
--- a/board/icecube/flash.c
+++ b/board/icecube/flash.c
@@ -24,7 +24,7 @@
 #include <common.h>
 
 #ifndef CONFIG_FLASH_CFI_DRIVER
-flash_info_t	flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips	*/
+flash_info_t	flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips	*/
 
 /* NOTE - CONFIG_FLASH_16BIT means the CPU interface is 16-bit, it
  *        has nothing to do with the flash chip being 8-bit or 16-bit.
@@ -66,12 +66,12 @@ unsigned long flash_init (void)
 	int i;
 	extern void flash_preinit(void);
 	extern void flash_afterinit(ulong);
-	ulong flashbase = CFG_FLASH_BASE;
+	ulong flashbase = CONFIG_SYS_FLASH_BASE;
 
 	flash_preinit();
 
 	/* Init: no FLASHes known */
-	for (i=0; i < CFG_MAX_FLASH_BANKS; ++i) {
+	for (i=0; i < CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
 		memset(&flash_info[i], 0, sizeof(flash_info_t));
 
 		flash_info[i].size =
@@ -80,20 +80,20 @@ unsigned long flash_init (void)
 		size += flash_info[i].size;
 		flashbase += 0x800000;
 	}
-#if CFG_MONITOR_BASE >= CFG_FLASH_BASE
+#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE
 	/* monitor protection ON by default */
 	flash_protect(FLAG_PROTECT_SET,
-		      CFG_MONITOR_BASE,
-		      CFG_MONITOR_BASE+monitor_flash_len-1,
-		      flash_get_info(CFG_MONITOR_BASE));
+		      CONFIG_SYS_MONITOR_BASE,
+		      CONFIG_SYS_MONITOR_BASE+monitor_flash_len-1,
+		      flash_get_info(CONFIG_SYS_MONITOR_BASE));
 #endif
 
-#ifdef	CFG_ENV_IS_IN_FLASH
+#ifdef	CONFIG_ENV_IS_IN_FLASH
 	/* ENV protection ON by default */
 	flash_protect(FLAG_PROTECT_SET,
-		      CFG_ENV_ADDR,
-		      CFG_ENV_ADDR+CFG_ENV_SIZE-1,
-		      flash_get_info(CFG_ENV_ADDR));
+		      CONFIG_ENV_ADDR,
+		      CONFIG_ENV_ADDR+CONFIG_ENV_SIZE-1,
+		      flash_get_info(CONFIG_ENV_ADDR));
 #endif
 
 
@@ -122,14 +122,14 @@ static flash_info_t *flash_get_info(ulong base)
 	int i;
 	flash_info_t * info;
 
-	for (i = 0; i < CFG_MAX_FLASH_BANKS; i ++) {
+	for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i ++) {
 		info = & flash_info[i];
 		if (info->size &&
 			info->start[0] <= base && base <= info->start[0] + info->size - 1)
 			break;
 	}
 
-	return i == CFG_MAX_FLASH_BANKS ? 0 : info;
+	return i == CONFIG_SYS_MAX_FLASH_BANKS ? 0 : info;
 }
 
 /*-----------------------------------------------------------------------
@@ -360,7 +360,7 @@ int	flash_erase (flash_info_t *info, int s_first, int s_last)
 		udelay (1000);
 
 		while ((*addr & (FPW)0x00800080) != (FPW)0x00800080) {
-			if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+			if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
 				printf ("Timeout\n");
 
 				if (intel) {
@@ -374,14 +374,14 @@ int	flash_erase (flash_info_t *info, int s_first, int s_last)
 			}
 
 			/* show that we're waiting */
-			if ((get_timer(last)) > CFG_HZ) {/* every second */
+			if ((get_timer(last)) > CONFIG_SYS_HZ) {/* every second */
 				putc ('.');
 				last = get_timer(0);
 			}
 		}
 
 		/* show that we're waiting */
-		if ((get_timer(last)) > CFG_HZ) {	/* every second */
+		if ((get_timer(last)) > CONFIG_SYS_HZ) {	/* every second */
 			putc ('.');
 			last = get_timer(0);
 		}
@@ -482,7 +482,7 @@ static int write_word_amd (flash_info_t *info, FPWV *dest, FPW data)
 
 	/* data polling for D7 */
 	while (res == 0 && (*dest & (FPW)0x00800080) != (data & (FPW)0x00800080)) {
-		if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+		if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
 			*dest = (FPW)0x00F000F0;	/* reset bank */
 			res = 1;
 		}
diff --git a/board/icecube/icecube.c b/board/icecube/icecube.c
index 760db7368..75244610c 100644
--- a/board/icecube/icecube.c
+++ b/board/icecube/icecube.c
@@ -29,6 +29,7 @@
 #include <pci.h>
 #include <asm/processor.h>
 #include <libfdt.h>
+#include <netdev.h>
 
 #if defined(CONFIG_LITE5200B)
 #include "mt46v32m16.h"
@@ -86,7 +87,7 @@ void lite5200b_wakeup(void)
 #define lite5200b_wakeup()
 #endif
 
-#ifndef CFG_RAMBOOT
+#ifndef CONFIG_SYS_RAMBOOT
 static void sdram_start (int hi_addr)
 {
 	long hi_addr_bit = hi_addr ? 0x01000000 : 0;
@@ -129,7 +130,7 @@ static void sdram_start (int hi_addr)
 
 /*
  * ATTENTION: Although partially referenced initdram does NOT make real use
- *            use of CFG_SDRAM_BASE. The code does not work if CFG_SDRAM_BASE
+ *            use of CONFIG_SYS_SDRAM_BASE. The code does not work if CONFIG_SYS_SDRAM_BASE
  *            is something else than 0x00000000.
  */
 
@@ -140,7 +141,7 @@ phys_size_t initdram (int board_type)
 	ulong dramsize2 = 0;
 	uint svr, pvr;
 
-#ifndef CFG_RAMBOOT
+#ifndef CONFIG_SYS_RAMBOOT
 	ulong test1, test2;
 
 	/* setup SDRAM chip selects */
@@ -161,9 +162,9 @@ phys_size_t initdram (int board_type)
 
 	/* find RAM size using SDRAM CS0 only */
 	sdram_start(0);
-	test1 = get_ram_size((long *)CFG_SDRAM_BASE, 0x80000000);
+	test1 = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE, 0x80000000);
 	sdram_start(1);
-	test2 = get_ram_size((long *)CFG_SDRAM_BASE, 0x80000000);
+	test2 = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE, 0x80000000);
 	if (test1 > test2) {
 		sdram_start(0);
 		dramsize = test1;
@@ -189,10 +190,10 @@ phys_size_t initdram (int board_type)
 	/* find RAM size using SDRAM CS1 only */
 	if (!dramsize)
 		sdram_start(0);
-	test2 = test1 = get_ram_size((long *)(CFG_SDRAM_BASE + dramsize), 0x80000000);
+	test2 = test1 = get_ram_size((long *)(CONFIG_SYS_SDRAM_BASE + dramsize), 0x80000000);
 	if (!dramsize) {
 		sdram_start(1);
-		test2 = get_ram_size((long *)(CFG_SDRAM_BASE + dramsize), 0x80000000);
+		test2 = get_ram_size((long *)(CONFIG_SYS_SDRAM_BASE + dramsize), 0x80000000);
 	}
 	if (test1 > test2) {
 		sdram_start(0);
@@ -214,7 +215,7 @@ phys_size_t initdram (int board_type)
 		*(vu_long *)MPC5XXX_SDRAM_CS1CFG = dramsize; /* disabled */
 	}
 
-#else /* CFG_RAMBOOT */
+#else /* CONFIG_SYS_RAMBOOT */
 
 	/* retrieve size of memory connected to SDRAM CS0 */
 	dramsize = *(vu_long *)MPC5XXX_SDRAM_CS0CFG & 0xFF;
@@ -232,7 +233,7 @@ phys_size_t initdram (int board_type)
 		dramsize2 = 0;
 	}
 
-#endif /* CFG_RAMBOOT */
+#endif /* CONFIG_SYS_RAMBOOT */
 
 	/*
 	 * On MPC5200B we need to set the special configuration delay in the
@@ -262,7 +263,7 @@ phys_size_t initdram (int board_type)
 phys_size_t initdram (int board_type)
 {
 	ulong dramsize = 0;
-#ifndef CFG_RAMBOOT
+#ifndef CONFIG_SYS_RAMBOOT
 	ulong test1, test2;
 
 	/* setup and enable SDRAM chip selects */
@@ -281,9 +282,9 @@ phys_size_t initdram (int board_type)
 
 	/* find RAM size */
 	sdram_start(0);
-	test1 = get_ram_size((long *)CFG_SDRAM_BASE, 0x80000000);
+	test1 = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE, 0x80000000);
 	sdram_start(1);
-	test2 = get_ram_size((long *)CFG_SDRAM_BASE, 0x80000000);
+	test2 = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE, 0x80000000);
 	if (test1 > test2) {
 		sdram_start(0);
 		dramsize = test1;
@@ -294,12 +295,12 @@ phys_size_t initdram (int board_type)
 	/* set SDRAM end address according to size */
 	*(vu_long *)MPC5XXX_SDRAM_STOP = ((dramsize - 1) >> 15);
 
-#else /* CFG_RAMBOOT */
+#else /* CONFIG_SYS_RAMBOOT */
 
 	/* Retrieve amount of SDRAM available */
 	dramsize = ((*(vu_long *)MPC5XXX_SDRAM_STOP + 1) << 15);
 
-#endif /* CFG_RAMBOOT */
+#endif /* CONFIG_SYS_RAMBOOT */
 
 	return dramsize;
 }
@@ -339,9 +340,9 @@ void flash_afterinit(ulong size)
 {
 	if (size == 0x800000) { /* adjust mapping */
 		*(vu_long *)MPC5XXX_BOOTCS_START = *(vu_long *)MPC5XXX_CS0_START =
-			START_REG(CFG_BOOTCS_START | size);
+			START_REG(CONFIG_SYS_BOOTCS_START | size);
 		*(vu_long *)MPC5XXX_BOOTCS_STOP = *(vu_long *)MPC5XXX_CS0_STOP =
-			STOP_REG(CFG_BOOTCS_START | size, size);
+			STOP_REG(CONFIG_SYS_BOOTCS_START | size, size);
 	}
 }
 
@@ -390,3 +391,9 @@ ft_board_setup(void *blob, bd_t *bd)
 	ft_cpu_setup(blob, bd);
 }
 #endif
+
+int board_eth_init(bd_t *bis)
+{
+	cpu_eth_init(bis); /* Built in FEC comes first */
+	return pci_eth_init(bis);
+}
diff --git a/board/icu862/flash.c b/board/icu862/flash.c
index ca5bcf31a..2afeff4b5 100644
--- a/board/icu862/flash.c
+++ b/board/icu862/flash.c
@@ -24,17 +24,17 @@
 #include <common.h>
 #include <mpc8xx.h>
 
-flash_info_t	flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips	*/
+flash_info_t	flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips	*/
 
-#if defined(CFG_ENV_IS_IN_FLASH)
-# ifndef  CFG_ENV_ADDR
-#  define CFG_ENV_ADDR	(CFG_FLASH_BASE + CFG_ENV_OFFSET)
+#if defined(CONFIG_ENV_IS_IN_FLASH)
+# ifndef  CONFIG_ENV_ADDR
+#  define CONFIG_ENV_ADDR	(CONFIG_SYS_FLASH_BASE + CONFIG_ENV_OFFSET)
 # endif
-# ifndef  CFG_ENV_SIZE
-#  define CFG_ENV_SIZE	CFG_ENV_SECT_SIZE
+# ifndef  CONFIG_ENV_SIZE
+#  define CONFIG_ENV_SIZE	CONFIG_ENV_SECT_SIZE
 # endif
-# ifndef  CFG_ENV_SECT_SIZE
-#  define CFG_ENV_SECT_SIZE  CFG_ENV_SIZE
+# ifndef  CONFIG_ENV_SECT_SIZE
+#  define CONFIG_ENV_SECT_SIZE  CONFIG_ENV_SIZE
 # endif
 #endif
 
@@ -50,13 +50,13 @@ static void flash_get_offsets (ulong base, flash_info_t *info);
 
 unsigned long flash_init (void)
 {
-	volatile immap_t     *immap  = (immap_t *)CFG_IMMR;
+	volatile immap_t     *immap  = (immap_t *)CONFIG_SYS_IMMR;
 	volatile memctl8xx_t *memctl = &immap->im_memctl;
 	unsigned long size_b0, size_b1;
 	int i;
 
 	/* Init: no FLASHes known */
-	for (i=0; i < CFG_MAX_FLASH_BANKS; ++i) {
+	for (i=0; i < CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
 		flash_info[i].flash_id = FLASH_UNKNOWN;
 	}
 
@@ -92,27 +92,27 @@ unsigned long flash_init (void)
 	}
 
 	/* Remap FLASH according to real size */
-	memctl->memc_or0 = CFG_OR_TIMING_FLASH | (-size_b0 & OR_AM_MSK);
-	memctl->memc_br0 = (CFG_FLASH_BASE & BR_BA_MSK) | BR_MS_GPCM | BR_V;
+	memctl->memc_or0 = CONFIG_SYS_OR_TIMING_FLASH | (-size_b0 & OR_AM_MSK);
+	memctl->memc_br0 = (CONFIG_SYS_FLASH_BASE & BR_BA_MSK) | BR_MS_GPCM | BR_V;
 
 	/* Re-do sizing to get full correct info */
-	size_b0 = flash_get_size((vu_long *)CFG_FLASH_BASE, &flash_info[0]);
+	size_b0 = flash_get_size((vu_long *)CONFIG_SYS_FLASH_BASE, &flash_info[0]);
 
-	flash_get_offsets (CFG_FLASH_BASE, &flash_info[0]);
+	flash_get_offsets (CONFIG_SYS_FLASH_BASE, &flash_info[0]);
 
-#if CFG_MONITOR_BASE >= CFG_FLASH_BASE
+#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE
 	/* monitor protection ON by default */
 	flash_protect(FLAG_PROTECT_SET,
-		      CFG_MONITOR_BASE,
-		      CFG_MONITOR_BASE+monitor_flash_len-1,
+		      CONFIG_SYS_MONITOR_BASE,
+		      CONFIG_SYS_MONITOR_BASE+monitor_flash_len-1,
 		      &flash_info[0]);
 #endif
 
-#ifdef	CFG_ENV_IS_IN_FLASH
+#ifdef	CONFIG_ENV_IS_IN_FLASH
 	/* ENV protection ON by default */
 	flash_protect(FLAG_PROTECT_SET,
-		      CFG_ENV_ADDR,
-		      CFG_ENV_ADDR+CFG_ENV_SIZE-1,
+		      CONFIG_ENV_ADDR,
+		      CONFIG_ENV_ADDR+CONFIG_ENV_SIZE-1,
 		      &flash_info[0]);
 #endif
 
@@ -468,7 +468,7 @@ int	flash_erase (flash_info_t *info, int s_first, int s_last)
 	while ((addr[0] & 0xFFFFFFFF) != 0xFFFFFFFF)
 #endif
 	{
-		if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+		if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
 			puts ("Timeout\n");
 			return 1;
 		}
@@ -606,7 +606,7 @@ static int write_word (flash_info_t *info, ulong dest, ulong data)
 	while ((*((vu_long *)dest) & 0x80808080) != (data & 0x80808080))
 #endif
 	{
-		if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+		if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
 			return (1);
 		}
 	}
diff --git a/board/icu862/icu862.c b/board/icu862/icu862.c
index 18aa8bf6d..b99d256c8 100644
--- a/board/icu862/icu862.c
+++ b/board/icu862/icu862.c
@@ -96,7 +96,7 @@ static long int dram_size (long int, long int *, long int);
 
 phys_size_t initdram (int board_type)
 {
-	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
 	volatile memctl8xx_t *memctl = &immap->im_memctl;
 	long int size8, size9;
 	long int size_b0 = 0;
@@ -111,7 +111,7 @@ phys_size_t initdram (int board_type)
 	 * with two SDRAM banks or four cycles every 31.2 us with one
 	 * bank. It will be adjusted after memory sizing.
 	 */
-	memctl->memc_mptpr = CFG_MPTPR_2BK_8K;
+	memctl->memc_mptpr = CONFIG_SYS_MPTPR_2BK_8K;
 
 	memctl->memc_mar = 0x00000088;
 
@@ -120,10 +120,10 @@ phys_size_t initdram (int board_type)
 	 * preliminary address - these have to be modified after the
 	 * SDRAM size has been determined.
 	 */
-	memctl->memc_or1 = CFG_OR1_PRELIM;
-	memctl->memc_br1 = CFG_BR1_PRELIM;
+	memctl->memc_or1 = CONFIG_SYS_OR1_PRELIM;
+	memctl->memc_br1 = CONFIG_SYS_BR1_PRELIM;
 
-	memctl->memc_mamr = CFG_MAMR_8COL & (~(MAMR_PTAE));	/* no refresh yet */
+	memctl->memc_mamr = CONFIG_SYS_MAMR_8COL & (~(MAMR_PTAE));	/* no refresh yet */
 
 	udelay (200);
 
@@ -143,7 +143,7 @@ phys_size_t initdram (int board_type)
 	 *
 	 * try 8 column mode
 	 */
-	size8 = dram_size (CFG_MAMR_8COL, SDRAM_BASE1_PRELIM,
+	size8 = dram_size (CONFIG_SYS_MAMR_8COL, SDRAM_BASE1_PRELIM,
 					   SDRAM_MAX_SIZE);
 
 	udelay (1000);
@@ -151,7 +151,7 @@ phys_size_t initdram (int board_type)
 	/*
 	 * try 9 column mode
 	 */
-	size9 = dram_size (CFG_MAMR_9COL, SDRAM_BASE1_PRELIM,
+	size9 = dram_size (CONFIG_SYS_MAMR_9COL, SDRAM_BASE1_PRELIM,
 					   SDRAM_MAX_SIZE);
 
 	if (size8 < size9) {		/* leave configuration at 9 columns */
@@ -159,7 +159,7 @@ phys_size_t initdram (int board_type)
 /*	debug ("SDRAM Bank 0 in 9 column mode: %ld MB\n", size >> 20);	*/
 	} else {					/* back to 8 columns            */
 		size_b0 = size8;
-		memctl->memc_mamr = CFG_MAMR_8COL;
+		memctl->memc_mamr = CONFIG_SYS_MAMR_8COL;
 		udelay (500);
 /*	debug ("SDRAM Bank 0 in 8 column mode: %ld MB\n", size >> 20);	*/
 	}
@@ -172,7 +172,7 @@ phys_size_t initdram (int board_type)
 	 */
 	if ((size_b0 < 0x02000000)) {
 		/* reduce to 15.6 us (62.4 us / quad) */
-		memctl->memc_mptpr = CFG_MPTPR_2BK_4K;
+		memctl->memc_mptpr = CONFIG_SYS_MPTPR_2BK_4K;
 		udelay (1000);
 	}
 
@@ -180,12 +180,12 @@ phys_size_t initdram (int board_type)
 	 * Final mapping
 	 */
 
-	memctl->memc_or1 = ((-size_b0) & 0xFFFF0000) | CFG_OR_TIMING_SDRAM;
-	memctl->memc_br1 = (CFG_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V;
+	memctl->memc_or1 = ((-size_b0) & 0xFFFF0000) | CONFIG_SYS_OR_TIMING_SDRAM;
+	memctl->memc_br1 = (CONFIG_SYS_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V;
 
 	/* adjust refresh rate depending on SDRAM type, one bank */
 	reg = memctl->memc_mptpr;
-	reg >>= 1;					/* reduce to CFG_MPTPR_1BK_8K / _4K */
+	reg >>= 1;					/* reduce to CONFIG_SYS_MPTPR_1BK_8K / _4K */
 	memctl->memc_mptpr = reg;
 
 	udelay (10000);
@@ -206,7 +206,7 @@ phys_size_t initdram (int board_type)
 static long int dram_size (long int mamr_value, long int *base,
 						   long int maxsize)
 {
-	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
 	volatile memctl8xx_t *memctl = &immap->im_memctl;
 
 	memctl->memc_mamr = mamr_value;
diff --git a/board/icu862/pcmcia.c b/board/icu862/pcmcia.c
index 20922d8a4..a4c0b54bc 100644
--- a/board/icu862/pcmcia.c
+++ b/board/icu862/pcmcia.c
@@ -22,8 +22,8 @@ static void cfg_port_B (void)
 	volatile cpm8xx_t	*cp;
 	uint reg;
 
-	immap = (immap_t *)CFG_IMMR;
-	cp    = (cpm8xx_t *)(&(((immap_t *)CFG_IMMR)->im_cpm));
+	immap = (immap_t *)CONFIG_SYS_IMMR;
+	cp    = (cpm8xx_t *)(&(((immap_t *)CONFIG_SYS_IMMR)->im_cpm));
 
 	/*
 	* Configure Port B for TPS2205 PC-Card Power-Interface Switch
@@ -58,10 +58,10 @@ int pcmcia_hardware_enable(int slot)
 
 	udelay(10000);
 
-	immap = (immap_t *)CFG_IMMR;
-	sysp  = (sysconf8xx_t *)(&(((immap_t *)CFG_IMMR)->im_siu_conf));
-	pcmp  = (pcmconf8xx_t *)(&(((immap_t *)CFG_IMMR)->im_pcmcia));
-	cp    = (cpm8xx_t *)(&(((immap_t *)CFG_IMMR)->im_cpm));
+	immap = (immap_t *)CONFIG_SYS_IMMR;
+	sysp  = (sysconf8xx_t *)(&(((immap_t *)CONFIG_SYS_IMMR)->im_siu_conf));
+	pcmp  = (pcmconf8xx_t *)(&(((immap_t *)CONFIG_SYS_IMMR)->im_pcmcia));
+	cp    = (cpm8xx_t *)(&(((immap_t *)CONFIG_SYS_IMMR)->im_cpm));
 
 	/* Configure Port B for TPS2205 PC-Card Power-Interface Switch */
 	cfg_port_B ();
@@ -165,9 +165,9 @@ int pcmcia_hardware_disable(int slot)
 
 	debug ("hardware_disable: " PCMCIA_BOARD_MSG " Slot %c\n", 'A'+slot);
 
-	immap = (immap_t *)CFG_IMMR;
-	cp    = (cpm8xx_t *)(&(((immap_t *)CFG_IMMR)->im_cpm));
-	pcmp  = (pcmconf8xx_t *)(&(((immap_t *)CFG_IMMR)->im_pcmcia));
+	immap = (immap_t *)CONFIG_SYS_IMMR;
+	cp    = (cpm8xx_t *)(&(((immap_t *)CONFIG_SYS_IMMR)->im_cpm));
+	pcmp  = (pcmconf8xx_t *)(&(((immap_t *)CONFIG_SYS_IMMR)->im_pcmcia));
 
 	/* Shut down */
 	cp->cp_pbdat &= ~(TPS2205_SHDN);
@@ -198,9 +198,9 @@ int pcmcia_voltage_set(int slot, int vcc, int vpp)
 			" Slot %c, Vcc=%d.%d, Vpp=%d.%d\n",
 	'A'+slot, vcc/10, vcc%10, vpp/10, vcc%10);
 
-	immap = (immap_t *)CFG_IMMR;
-	cp    = (cpm8xx_t *)(&(((immap_t *)CFG_IMMR)->im_cpm));
-	pcmp  = (pcmconf8xx_t *)(&(((immap_t *)CFG_IMMR)->im_pcmcia));
+	immap = (immap_t *)CONFIG_SYS_IMMR;
+	cp    = (cpm8xx_t *)(&(((immap_t *)CONFIG_SYS_IMMR)->im_cpm));
+	pcmp  = (pcmconf8xx_t *)(&(((immap_t *)CONFIG_SYS_IMMR)->im_pcmcia));
 	/*
 	* Disable PCMCIA buffers (isolate the interface)
 	* and assert RESET signal
diff --git a/board/icu862/u-boot.lds b/board/icu862/u-boot.lds
index be4bf7278..645baa0ed 100644
--- a/board/icu862/u-boot.lds
+++ b/board/icu862/u-boot.lds
@@ -65,7 +65,7 @@ SECTIONS
     lib_generic/zlib.o		(.text)
 
     . = env_offset;
-    common/environment.o(.text)
+    common/env_embedded.o(.text)
 */
 
     *(.text)
@@ -137,6 +137,7 @@ SECTIONS
    *(.dynbss)
    *(.bss)
    *(COMMON)
+   . = ALIGN(4);
   }
   _end = . ;
   PROVIDE (end = .);
diff --git a/board/icu862/u-boot.lds.debug b/board/icu862/u-boot.lds.debug
index 7a7a40c23..dbd1f9d10 100644
--- a/board/icu862/u-boot.lds.debug
+++ b/board/icu862/u-boot.lds.debug
@@ -62,7 +62,7 @@ SECTIONS
     lib_ppc/extable.o	(.text)
 
     . = env_offset;
-    common/environment.o(.text)
+    common/env_embedded.o(.text)
 
     *(.text)
     *(.fixup)
diff --git a/board/idmr/Makefile b/board/idmr/Makefile
index be704b76f..cf07cf40f 100644
--- a/board/idmr/Makefile
+++ b/board/idmr/Makefile
@@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk
 
 LIB	= $(obj)lib$(BOARD).a
 
-COBJS	= $(BOARD).o flash.o mii.o
+COBJS	= $(BOARD).o flash.o
 
 SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
 OBJS	:= $(addprefix $(obj),$(COBJS))
diff --git a/board/idmr/flash.c b/board/idmr/flash.c
index 33512b894..57c994863 100644
--- a/board/idmr/flash.c
+++ b/board/idmr/flash.c
@@ -23,11 +23,11 @@
 
 #include <common.h>
 
-#define PHYS_FLASH_1 CFG_FLASH_BASE
+#define PHYS_FLASH_1 CONFIG_SYS_FLASH_BASE
 #define FLASH_BANK_SIZE 0x800000
 #define EN29LV640 0x227e227e
 
-flash_info_t flash_info[CFG_MAX_FLASH_BANKS];
+flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];
 
 void flash_print_info (flash_info_t * info)
 {
@@ -75,15 +75,15 @@ unsigned long flash_init (void)
 	int i, j;
 	ulong size = 0;
 
-	for (i = 0; i < CFG_MAX_FLASH_BANKS; i++) {
+	for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) {
 		ulong flashbase = 0;
 
 		flash_info[i].flash_id =
 			(AMD_MANUFACT & FLASH_VENDMASK) |
 			(EN29LV640 & FLASH_TYPEMASK);
 		flash_info[i].size = FLASH_BANK_SIZE;
-		flash_info[i].sector_count = CFG_MAX_FLASH_SECT;
-		memset (flash_info[i].protect, 0, CFG_MAX_FLASH_SECT);
+		flash_info[i].sector_count = CONFIG_SYS_MAX_FLASH_SECT;
+		memset (flash_info[i].protect, 0, CONFIG_SYS_MAX_FLASH_SECT);
 		if (i == 0)
 			flashbase = PHYS_FLASH_1;
 		else
@@ -96,8 +96,8 @@ unsigned long flash_init (void)
 	}
 
 	flash_protect (FLAG_PROTECT_SET,
-		       CFG_FLASH_BASE,
-		       CFG_FLASH_BASE + 0x2ffff, &flash_info[0]);
+		       CONFIG_SYS_FLASH_BASE,
+		       CONFIG_SYS_FLASH_BASE + 0x2ffff, &flash_info[0]);
 
 	return size;
 }
@@ -111,8 +111,8 @@ unsigned long flash_init (void)
 #define CMD_PROGRAM		0x00A0
 #define CMD_UNLOCK_BYPASS	0x0020
 
-#define MEM_FLASH_ADDR1		(*(volatile u16 *)(CFG_FLASH_BASE + (0x00000555<<1)))
-#define MEM_FLASH_ADDR2		(*(volatile u16 *)(CFG_FLASH_BASE + (0x000002AA<<1)))
+#define MEM_FLASH_ADDR1		(*(volatile u16 *)(CONFIG_SYS_FLASH_BASE + (0x00000555<<1)))
+#define MEM_FLASH_ADDR2		(*(volatile u16 *)(CONFIG_SYS_FLASH_BASE + (0x000002AA<<1)))
 
 #define BIT_ERASE_DONE		0x0080
 #define BIT_RDY_MASK		0x0080
@@ -191,7 +191,7 @@ int flash_erase (flash_info_t * info, int s_first, int s_last)
 				result = *addr;
 
 				/* check timeout */
-				if (get_timer (0) > CFG_FLASH_ERASE_TOUT * CFG_HZ / 1000) {
+				if (get_timer (0) > CONFIG_SYS_FLASH_ERASE_TOUT * CONFIG_SYS_HZ / 1000) {
 					MEM_FLASH_ADDR1 = CMD_READ_ARRAY;
 					chip1 = TMO;
 					break;
@@ -280,7 +280,7 @@ static int write_word (flash_info_t * info, ulong dest, ulong data)
 		result = *addr;
 
 		/* check timeout */
-		if (get_timer (0) > CFG_FLASH_ERASE_TOUT * CFG_HZ / 1000) {
+		if (get_timer (0) > CONFIG_SYS_FLASH_ERASE_TOUT * CONFIG_SYS_HZ / 1000) {
 			chip1 = ERR | TMO;
 			break;
 		}
diff --git a/board/idmr/idmr.c b/board/idmr/idmr.c
index 4f073fc31..682991379 100644
--- a/board/idmr/idmr.c
+++ b/board/idmr/idmr.c
@@ -35,7 +35,7 @@ phys_size_t initdram (int board_type) {
 	/*
 	 * After reset, CS0 is configured to cover entire address space. We
 	 * need to configure it to its proper values, so that writes to
-	 * CFG_SDRAM_BASE and vicinity during SDRAM controller setup below do
+	 * CONFIG_SYS_SDRAM_BASE and vicinity during SDRAM controller setup below do
 	 * now fall under CS0 (see 16.3.1 of the MCF5271 Reference Manual).
 	 */
 
@@ -78,7 +78,7 @@ phys_size_t initdram (int board_type) {
 			MCF_GPIO_SDRAM_SDCS_01);
 
 	/*
-	 * Wait 100us.  We run the bus at 50Mhz, one cycle is 20ns. So 5
+	 * Wait 100us.  We run the bus at 50MHz, one cycle is 20ns. So 5
 	 * iterations will do, but we do 10 just to be safe.
 	 */
 	for (i = 0; i < 10; ++i)
@@ -99,7 +99,7 @@ phys_size_t initdram (int board_type) {
 	 * PS: 16 bit
 	 */
 	mbar_writeLong(MCF_SDRAMC_DACR0,
-			MCF_SDRAMC_DACRn_BA(CFG_SDRAM_BASE>>18) |
+			MCF_SDRAMC_DACRn_BA(CONFIG_SYS_SDRAM_BASE>>18) |
 			MCF_SDRAMC_DACRn_BA(0x00) |
 			MCF_SDRAMC_DACRn_CASL(0x03) |
 			MCF_SDRAMC_DACRn_CBM(0x03) |
@@ -117,7 +117,7 @@ phys_size_t initdram (int board_type) {
 			MCF_SDRAMC_DACRn_IP);
 
 	/* Write to this block to initiate precharge */
-	*(volatile u16 *)(CFG_SDRAM_BASE) = 0xa5a5;
+	*(volatile u16 *)(CONFIG_SYS_SDRAM_BASE) = 0xa5a5;
 
 	/*
 	 * Wait at least 20ns to allow banks to precharge (t_RP = 20ns). We
@@ -153,9 +153,9 @@ phys_size_t initdram (int board_type) {
 	 * Burst Type = Sequential
 	 * Burst Length = 1
 	 */
-	*(volatile u32 *)(CFG_SDRAM_BASE + 0x1800) = 0xa5a5a5a5;
+	*(volatile u32 *)(CONFIG_SYS_SDRAM_BASE + 0x1800) = 0xa5a5a5a5;
 
-	return CFG_SDRAM_SIZE * 1024 * 1024;
+	return CONFIG_SYS_SDRAM_SIZE * 1024 * 1024;
 };
 
 
diff --git a/board/idmr/mii.c b/board/idmr/mii.c
deleted file mode 100644
index 78a7028bc..000000000
--- a/board/idmr/mii.c
+++ /dev/null
@@ -1,303 +0,0 @@
-/*
- * Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
- * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/fec.h>
-#include <asm/immap.h>
-
-#include <config.h>
-#include <net.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#if defined(CONFIG_CMD_NET) && defined(CONFIG_NET_MULTI)
-#undef MII_DEBUG
-#undef ET_DEBUG
-
-int fecpin_setclear(struct eth_device *dev, int setclear)
-{
-	if (setclear) {
-		/* Enable Ethernet pins */
-		mbar_writeByte(MCF_GPIO_PAR_FECI2C, CFG_FECI2C);
-	} else {
-	}
-
-	return 0;
-}
-
-#if defined(CFG_DISCOVER_PHY) || defined(CONFIG_CMD_MII)
-#include <miiphy.h>
-
-/* Make MII read/write commands for the FEC. */
-#define mk_mii_read(ADDR, REG)	(0x60020000 | ((ADDR << 23) | (REG & 0x1f) << 18))
-
-#define mk_mii_write(ADDR, REG, VAL)	(0x50020000 | ((ADDR << 23) | (REG & 0x1f) << 18) | (VAL & 0xffff))
-
-/* PHY identification */
-#define PHY_ID_LXT970		0x78100000	/* LXT970 */
-#define PHY_ID_LXT971		0x001378e0	/* LXT971 and 972 */
-#define PHY_ID_82555		0x02a80150	/* Intel 82555 */
-#define PHY_ID_QS6612		0x01814400	/* QS6612 */
-#define PHY_ID_AMD79C784	0x00225610	/* AMD 79C784 */
-#define PHY_ID_LSI80225		0x0016f870	/* LSI 80225 */
-#define PHY_ID_LSI80225B	0x0016f880	/* LSI 80225/B */
-#define PHY_ID_DP83848VV	0x20005C90	/* National 83848 */
-#define PHY_ID_DP83849		0x20005CA2	/* National 82849 */
-#define PHY_ID_KS8721BL		0x00221619	/* Micrel KS8721BL/SL */
-
-#define STR_ID_LXT970		"LXT970"
-#define STR_ID_LXT971		"LXT971"
-#define STR_ID_82555		"Intel82555"
-#define STR_ID_QS6612		"QS6612"
-#define STR_ID_AMD79C784	"AMD79C784"
-#define STR_ID_LSI80225		"LSI80225"
-#define STR_ID_LSI80225B	"LSI80225/B"
-#define STR_ID_DP83848VV	"N83848"
-#define STR_ID_DP83849		"N83849"
-#define STR_ID_KS8721BL		"KS8721BL"
-
-/****************************************************************************
- * mii_init -- Initialize the MII for MII command without ethernet
- * This function is a subset of eth_init
- ****************************************************************************
- */
-void mii_reset(struct fec_info_s *info)
-{
-	volatile fec_t *fecp = (fec_t *) (info->miibase);
-	int i;
-
-	fecp->ecr = FEC_ECR_RESET;
-	for (i = 0; (fecp->ecr & FEC_ECR_RESET) && (i < FEC_RESET_DELAY); ++i) {
-		udelay(1);
-	}
-	if (i == FEC_RESET_DELAY) {
-		printf("FEC_RESET_DELAY timeout\n");
-	}
-}
-
-/* send command to phy using mii, wait for result */
-uint mii_send(uint mii_cmd)
-{
-	struct fec_info_s *info;
-	struct eth_device *dev;
-	volatile fec_t *ep;
-	uint mii_reply;
-	int j = 0;
-
-	/* retrieve from register structure */
-	dev = eth_get_dev();
-	info = dev->priv;
-
-	ep = (fec_t *) info->miibase;
-
-	ep->mmfr = mii_cmd;	/* command to phy */
-
-	/* wait for mii complete */
-	while (!(ep->eir & FEC_EIR_MII) && (j < MCFFEC_TOUT_LOOP)) {
-		udelay(1);
-		j++;
-	}
-	if (j >= MCFFEC_TOUT_LOOP) {
-		printf("MII not complete\n");
-		return -1;
-	}
-
-	mii_reply = ep->mmfr;	/* result from phy */
-	ep->eir = FEC_EIR_MII;	/* clear MII complete */
-#ifdef ET_DEBUG
-	printf("%s[%d] %s: sent=0x%8.8x, reply=0x%8.8x\n",
-	       __FILE__, __LINE__, __FUNCTION__, mii_cmd, mii_reply);
-#endif
-
-	return (mii_reply & 0xffff);	/* data read from phy */
-}
-#endif				/* CFG_DISCOVER_PHY || CONFIG_CMD_MII */
-
-#if defined(CFG_DISCOVER_PHY)
-int mii_discover_phy(struct eth_device *dev)
-{
-#define MAX_PHY_PASSES 11
-	struct fec_info_s *info = dev->priv;
-	int phyaddr, pass;
-	uint phyno, phytype;
-
-	if (info->phyname_init)
-		return info->phy_addr;
-
-	phyaddr = -1;		/* didn't find a PHY yet */
-	for (pass = 1; pass <= MAX_PHY_PASSES && phyaddr < 0; ++pass) {
-		if (pass > 1) {
-			/* PHY may need more time to recover from reset.
-			 * The LXT970 needs 50ms typical, no maximum is
-			 * specified, so wait 10ms before try again.
-			 * With 11 passes this gives it 100ms to wake up.
-			 */
-			udelay(10000);	/* wait 10ms */
-		}
-
-		for (phyno = 0; phyno < 32 && phyaddr < 0; ++phyno) {
-
-			phytype = mii_send(mk_mii_read(phyno, PHY_PHYIDR1));
-#ifdef ET_DEBUG
-			printf("PHY type 0x%x pass %d type\n", phytype, pass);
-#endif
-			if (phytype != 0xffff) {
-				phyaddr = phyno;
-				phytype <<= 16;
-				phytype |=
-				    mii_send(mk_mii_read(phyno, PHY_PHYIDR2));
-
-				switch (phytype & 0xffffffff) {
-				case PHY_ID_KS8721BL:
-					strcpy(info->phy_name,
-					       STR_ID_KS8721BL);
-					info->phyname_init = 1;
-					break;
-				default:
-					strcpy(info->phy_name, "unknown");
-					info->phyname_init = 1;
-					break;
-				}
-
-#ifdef ET_DEBUG
-				printf("PHY @ 0x%x pass %d type ", phyno, pass);
-				switch (phytype & 0xffffffff) {
-				case PHY_ID_KS8721BL:
-					printf(STR_ID_KS8721BL);
-					break;
-				default:
-					printf("0x%08x\n", phytype);
-					break;
-				}
-#endif
-			}
-		}
-	}
-	if (phyaddr < 0)
-		printf("No PHY device found.\n");
-
-	return phyaddr;
-}
-#endif				/* CFG_DISCOVER_PHY */
-
-void mii_init(void) __attribute__((weak,alias("__mii_init")));
-
-void __mii_init(void)
-{
-	volatile fec_t *fecp;
-	struct fec_info_s *info;
-	struct eth_device *dev;
-	int miispd = 0, i = 0;
-	u16 autoneg = 0;
-
-	/* retrieve from register structure */
-	dev = eth_get_dev();
-	info = dev->priv;
-
-	fecp = (fec_t *) info->miibase;
-
-	fecpin_setclear(dev, 1);
-
-	mii_reset(info);
-
-	/* We use strictly polling mode only */
-	fecp->eimr = 0;
-
-	/* Clear any pending interrupt */
-	fecp->eir = 0xffffffff;
-
-	/* Set MII speed */
-	miispd = (gd->bus_clk / 1000000) / 5;
-	fecp->mscr = miispd << 1;
-
-	info->phy_addr = mii_discover_phy(dev);
-
-#define AUTONEGLINK		(PHY_BMSR_AUTN_COMP | PHY_BMSR_LS)
-	while (i < MCFFEC_TOUT_LOOP) {
-		autoneg = 0;
-		miiphy_read(dev->name, info->phy_addr, PHY_BMSR, &autoneg);
-		i++;
-
-		if ((autoneg & AUTONEGLINK) == AUTONEGLINK)
-			break;
-
-		udelay(500);
-	}
-	if (i >= MCFFEC_TOUT_LOOP) {
-		printf("Auto Negotiation not complete\n");
-	}
-
-	/* adapt to the half/full speed settings */
-	info->dup_spd = miiphy_duplex(dev->name, info->phy_addr) << 16;
-	info->dup_spd |= miiphy_speed(dev->name, info->phy_addr);
-}
-
-/*****************************************************************************
- * Read and write a MII PHY register, routines used by MII Utilities
- *
- * FIXME: These routines are expected to return 0 on success, but mii_send
- *	  does _not_ return an error code. Maybe 0xFFFF means error, i.e.
- *	  no PHY connected...
- *	  For now always return 0.
- * FIXME: These routines only work after calling eth_init() at least once!
- *	  Otherwise they hang in mii_send() !!! Sorry!
- *****************************************************************************/
-
-int mcffec_miiphy_read(char *devname, unsigned char addr, unsigned char reg,
-		       unsigned short *value)
-{
-	short rdreg;		/* register working value */
-
-#ifdef MII_DEBUG
-	printf("miiphy_read(0x%x) @ 0x%x = ", reg, addr);
-#endif
-	rdreg = mii_send(mk_mii_read(addr, reg));
-
-	*value = rdreg;
-
-#ifdef MII_DEBUG
-	printf("0x%04x\n", *value);
-#endif
-
-	return 0;
-}
-
-int mcffec_miiphy_write(char *devname, unsigned char addr, unsigned char reg,
-			unsigned short value)
-{
-	short rdreg;		/* register working value */
-
-#ifdef MII_DEBUG
-	printf("miiphy_write(0x%x) @ 0x%x = ", reg, addr);
-#endif
-
-	rdreg = mii_send(mk_mii_write(addr, reg, value));
-
-#ifdef MII_DEBUG
-	printf("0x%04x\n", value);
-#endif
-
-	return 0;
-}
-
-#endif				/* CONFIG_CMD_NET, FEC_ENET & NET_MULTI */
diff --git a/board/idmr/u-boot.lds b/board/idmr/u-boot.lds
index c07d02383..0bc7fa1ab 100644
--- a/board/idmr/u-boot.lds
+++ b/board/idmr/u-boot.lds
@@ -63,7 +63,7 @@ SECTIONS
     lib_generic/zlib.o		(.text)
 
     . = DEFINED(env_offset) ? env_offset : .;
-    common/environment.o	(.ppcenv)
+    common/env_embedded.o	(.ppcenv)
 
     *(.text)
     *(.fixup)
diff --git a/board/ids8247/config.mk b/board/ids8247/config.mk
index 136cdb864..2a7f3dd12 100644
--- a/board/ids8247/config.mk
+++ b/board/ids8247/config.mk
@@ -25,7 +25,7 @@
 # IDS 8247 Board
 #
 
-# This should be equal to the CFG_FLASH_BASE define in config_IDS8247.h
+# This should be equal to the CONFIG_SYS_FLASH_BASE define in config_IDS8247.h
 # for the "final" configuration, with U-Boot in flash, or the address
 # in RAM where U-Boot is loaded at for debugging.
 #
diff --git a/board/ids8247/flash.c b/board/ids8247/flash.c
index 4eba4b968..5107553c9 100644
--- a/board/ids8247/flash.c
+++ b/board/ids8247/flash.c
@@ -31,17 +31,17 @@
 
 #include <common.h>
 
-flash_info_t flash_info[CFG_MAX_FLASH_BANKS];	/* info for FLASH chips    */
+flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];	/* info for FLASH chips    */
 
-#if defined(CFG_ENV_IS_IN_FLASH)
-# ifndef  CFG_ENV_ADDR
-#  define CFG_ENV_ADDR	(CFG_FLASH_BASE + CFG_ENV_OFFSET)
+#if defined(CONFIG_ENV_IS_IN_FLASH)
+# ifndef  CONFIG_ENV_ADDR
+#  define CONFIG_ENV_ADDR	(CONFIG_SYS_FLASH_BASE + CONFIG_ENV_OFFSET)
 # endif
-# ifndef  CFG_ENV_SIZE
-#  define CFG_ENV_SIZE	CFG_ENV_SECT_SIZE
+# ifndef  CONFIG_ENV_SIZE
+#  define CONFIG_ENV_SIZE	CONFIG_ENV_SECT_SIZE
 # endif
-# ifndef  CFG_ENV_SECT_SIZE
-#  define CFG_ENV_SECT_SIZE  CFG_ENV_SIZE
+# ifndef  CONFIG_ENV_SECT_SIZE
+#  define CONFIG_ENV_SECT_SIZE  CONFIG_ENV_SIZE
 # endif
 #endif
 
@@ -84,16 +84,16 @@ unsigned long flash_init (void)
 {
 	unsigned long size_b0;
 	int i;
-	volatile immap_t * immr = (immap_t *)CFG_IMMR;
+	volatile immap_t * immr = (immap_t *)CONFIG_SYS_IMMR;
 	volatile memctl8260_t *memctl = &immr->im_memctl;
 
 	/* Init: no FLASHes known */
-	for (i = 0; i < CFG_MAX_FLASH_BANKS; ++i) {
+	for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
 		flash_info[i].flash_id = FLASH_UNKNOWN;
 	}
 
 	/* Static FLASH Bank configuration here - FIXME XXX */
-	size_b0 = flash_get_size ((FPW *) CFG_FLASH0_BASE, &flash_info[0]);
+	size_b0 = flash_get_size ((FPW *) CONFIG_SYS_FLASH0_BASE, &flash_info[0]);
 
 	if (flash_info[0].flash_id == FLASH_UNKNOWN) {
 		printf ("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n",
@@ -105,19 +105,19 @@ unsigned long flash_init (void)
 
 	flash_get_offsets (0xff800000, &flash_info[0]);
 
-#if CFG_MONITOR_BASE >= CFG_FLASH_BASE
+#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE
 	/* monitor protection ON by default */
 	(void) flash_protect (FLAG_PROTECT_SET,
-				CFG_MONITOR_BASE,
-				CFG_MONITOR_BASE + monitor_flash_len - 1,
+				CONFIG_SYS_MONITOR_BASE,
+				CONFIG_SYS_MONITOR_BASE + monitor_flash_len - 1,
 				&flash_info[0]);
 #endif
 
-#ifdef	CFG_ENV_IS_IN_FLASH
+#ifdef	CONFIG_ENV_IS_IN_FLASH
 	/* ENV protection ON by default */
 	flash_protect (FLAG_PROTECT_SET,
-			CFG_ENV_ADDR,
-			CFG_ENV_ADDR + CFG_ENV_SIZE - 1,
+			CONFIG_ENV_ADDR,
+			CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1,
 			&flash_info[0]);
 #endif
 
@@ -258,10 +258,10 @@ static ulong flash_get_size (FPWV * addr, flash_info_t * info)
 		break;
 	}
 
-	if (info->sector_count > CFG_MAX_FLASH_SECT) {
+	if (info->sector_count > CONFIG_SYS_MAX_FLASH_SECT) {
 		printf ("** ERROR: sector count %d > max (%d) **\n",
-				info->sector_count, CFG_MAX_FLASH_SECT);
-		info->sector_count = CFG_MAX_FLASH_SECT;
+				info->sector_count, CONFIG_SYS_MAX_FLASH_SECT);
+		info->sector_count = CONFIG_SYS_MAX_FLASH_SECT;
 	}
 
 	addr[0] = (FPW) 0x00FF00FF;	/* restore read mode */
@@ -332,7 +332,7 @@ int flash_erase (flash_info_t * info, int s_first, int s_last)
 			udelay (1000);
 
 			while (((status = *addr) & (FPW) 0x00800080) != (FPW) 0x00800080) {
-			    if ((now = get_timer (start)) > CFG_FLASH_ERASE_TOUT) {
+			    if ((now = get_timer (start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
 				printf ("Timeout\n");
 				*addr = (FPW) 0x00B000B0;	/* suspend erase     */
 				*addr = (FPW) 0x00FF00FF;	/* reset to read mode */
@@ -472,7 +472,7 @@ static int write_data (flash_info_t * info, ulong dest, FPW data)
 	start = get_timer (0);
 
 	while (((status = *addr) & (FPW) 0x00800080) != (FPW) 0x00800080) {
-		if (get_timer (start) > CFG_FLASH_WRITE_TOUT) {
+		if (get_timer (start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
 			*addr = (FPW) 0x00FF00FF;	/* restore read mode */
 			return (1);
 		}
diff --git a/board/ids8247/ids8247.c b/board/ids8247/ids8247.c
index 065014a11..68b70703f 100644
--- a/board/ids8247/ids8247.c
+++ b/board/ids8247/ids8247.c
@@ -254,7 +254,7 @@ static long int try_init (volatile memctl8260_t * memctl, ulong sdmr,
 	 *  accessing the SDRAM with a single-byte transaction."
 	 *
 	 * The appropriate BRx/ORx registers have already been set when we
-	 * get here. The SDRAM can be accessed at the address CFG_SDRAM_BASE.
+	 * get here. The SDRAM can be accessed at the address CONFIG_SYS_SDRAM_BASE.
 	 */
 
 	*sdmr_ptr = sdmr | PSDMR_OP_PREA;
@@ -265,7 +265,7 @@ static long int try_init (volatile memctl8260_t * memctl, ulong sdmr,
 		*base = c;
 
 	*sdmr_ptr = sdmr | PSDMR_OP_MRW;
-	*(base + CFG_MRS_OFFS) = c;	/* setting MR on address lines */
+	*(base + CONFIG_SYS_MRS_OFFS) = c;	/* setting MR on address lines */
 
 	*sdmr_ptr = sdmr | PSDMR_OP_NORM | PSDMR_RFEN;
 	*base = c;
@@ -278,7 +278,7 @@ static long int try_init (volatile memctl8260_t * memctl, ulong sdmr,
 
 phys_size_t initdram (int board_type)
 {
-	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
 	volatile memctl8260_t *memctl = &immap->im_memctl;
 
 	long psize, lsize;
@@ -286,15 +286,15 @@ phys_size_t initdram (int board_type)
 	psize = 16 * 1024 * 1024;
 	lsize = 0;
 
-	memctl->memc_psrt = CFG_PSRT;
-	memctl->memc_mptpr = CFG_MPTPR;
+	memctl->memc_psrt = CONFIG_SYS_PSRT;
+	memctl->memc_mptpr = CONFIG_SYS_MPTPR;
 
-#ifndef CFG_RAMBOOT
+#ifndef CONFIG_SYS_RAMBOOT
 	/* 60x SDRAM setup:
 	 */
-	psize = try_init (memctl, CFG_PSDMR, CFG_OR2,
-						  (uchar *) CFG_SDRAM_BASE);
-#endif /* CFG_RAMBOOT */
+	psize = try_init (memctl, CONFIG_SYS_PSDMR, CONFIG_SYS_OR2,
+						  (uchar *) CONFIG_SYS_SDRAM_BASE);
+#endif /* CONFIG_SYS_RAMBOOT */
 
 	icache_enable ();
 
@@ -315,8 +315,8 @@ nand_init (void)
 {
 	ulong totlen = 0;
 
-	debug ("Probing at 0x%.8x\n", CFG_NAND0_BASE);
-	totlen += nand_probe (CFG_NAND0_BASE);
+	debug ("Probing at 0x%.8x\n", CONFIG_SYS_NAND0_BASE);
+	totlen += nand_probe (CONFIG_SYS_NAND0_BASE);
 
 	printf ("%4lu MB\n", totlen >>20);
 }
diff --git a/board/impa7/flash.c b/board/impa7/flash.c
index ca76fe832..d0c5880b3 100644
--- a/board/impa7/flash.c
+++ b/board/impa7/flash.c
@@ -28,7 +28,7 @@
 #define MAIN_SECT_SIZE  0x20000
 #define PARAM_SECT_SIZE 0x4000
 
-flash_info_t flash_info[CFG_MAX_FLASH_BANKS];
+flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];
 
 
 /*-----------------------------------------------------------------------
@@ -39,15 +39,15 @@ ulong flash_init (void)
 	int i, j;
 	ulong size = 0;
 
-	for (i = 0; i < CFG_MAX_FLASH_BANKS; i++) {
+	for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) {
 		ulong flashbase = 0;
 
 		flash_info[i].flash_id =
 			(INTEL_MANUFACT & FLASH_VENDMASK) |
 			(INTEL_ID_28F320B3T & FLASH_TYPEMASK);
 		flash_info[i].size = FLASH_BANK_SIZE;
-		flash_info[i].sector_count = CFG_MAX_FLASH_SECT;
-		memset (flash_info[i].protect, 0, CFG_MAX_FLASH_SECT);
+		flash_info[i].sector_count = CONFIG_SYS_MAX_FLASH_SECT;
+		memset (flash_info[i].protect, 0, CONFIG_SYS_MAX_FLASH_SECT);
 		if (i == 0)
 			flashbase = PHYS_FLASH_1;
 		else if (i == 1)
@@ -69,13 +69,13 @@ ulong flash_init (void)
 	/* Protect monitor and environment sectors
 	 */
 	flash_protect (FLAG_PROTECT_SET,
-		       CFG_FLASH_BASE,
-		       CFG_FLASH_BASE + monitor_flash_len - 1,
+		       CONFIG_SYS_FLASH_BASE,
+		       CONFIG_SYS_FLASH_BASE + monitor_flash_len - 1,
 		       &flash_info[0]);
 
 	flash_protect (FLAG_PROTECT_SET,
-		       CFG_ENV_ADDR,
-		       CFG_ENV_ADDR + CFG_ENV_SIZE - 1, &flash_info[0]);
+		       CONFIG_ENV_ADDR,
+		       CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1, &flash_info[0]);
 
 	return size;
 }
@@ -175,7 +175,7 @@ int flash_erase (flash_info_t * info, int s_first, int s_last)
 
 			while ((*addr & 0x00800080) != 0x00800080) {
 				if (get_timer_masked () >
-				    CFG_FLASH_ERASE_TOUT) {
+				    CONFIG_SYS_FLASH_ERASE_TOUT) {
 					*addr = 0x00B000B0;	/* suspend erase */
 					*addr = 0x00FF00FF;	/* reset to read mode */
 					rc = ERR_TIMOUT;
@@ -243,7 +243,7 @@ static int write_word (flash_info_t * info, ulong dest, ulong data)
 
 	/* wait while polling the status register */
 	while ((*addr & 0x00800080) != 0x00800080) {
-		if (get_timer_masked () > CFG_FLASH_WRITE_TOUT) {
+		if (get_timer_masked () > CONFIG_SYS_FLASH_WRITE_TOUT) {
 			rc = ERR_TIMOUT;
 			/* suspend program command */
 			*addr = 0x00B000B0;
diff --git a/board/impa7/u-boot.lds b/board/impa7/u-boot.lds
index 4a89cebaa..a79bb8cb8 100644
--- a/board/impa7/u-boot.lds
+++ b/board/impa7/u-boot.lds
@@ -51,6 +51,6 @@ SECTIONS
 
 	. = ALIGN(4);
 	__bss_start = .;
-	.bss (NOLOAD) : { *(.bss) }
+	.bss (NOLOAD) : { *(.bss) . = ALIGN(4); }
 	_end = .;
 }
diff --git a/board/imx31_litekit/u-boot.lds b/board/imx31_litekit/u-boot.lds
index 1460adcdd..9285bd574 100644
--- a/board/imx31_litekit/u-boot.lds
+++ b/board/imx31_litekit/u-boot.lds
@@ -54,6 +54,6 @@ SECTIONS
 
 	. = ALIGN(4);
 	__bss_start = .;
-	.bss : { *(.bss) }
+	.bss : { *(.bss) . = ALIGN(4); }
 	_end = .;
 }
diff --git a/board/imx31_phycore/u-boot.lds b/board/imx31_phycore/u-boot.lds
index 1460adcdd..9285bd574 100644
--- a/board/imx31_phycore/u-boot.lds
+++ b/board/imx31_phycore/u-boot.lds
@@ -54,6 +54,6 @@ SECTIONS
 
 	. = ALIGN(4);
 	__bss_start = .;
-	.bss : { *(.bss) }
+	.bss : { *(.bss) . = ALIGN(4); }
 	_end = .;
 }
diff --git a/board/incaip/flash.c b/board/incaip/flash.c
index 520514dea..cc11e24fe 100644
--- a/board/incaip/flash.c
+++ b/board/incaip/flash.c
@@ -24,7 +24,7 @@
 #include <common.h>
 #include <asm/inca-ip.h>
 
-flash_info_t	flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips	*/
+flash_info_t	flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips	*/
 
 /* NOTE - CONFIG_FLASH_16BIT means the CPU interface is 16-bit, it
  *        has nothing to do with the flash chip being 8-bit or 16-bit.
@@ -73,7 +73,7 @@ unsigned long flash_init (void)
 	int i;
 
 	/* Init: no FLASHes known */
-	for (i=0; i < CFG_MAX_FLASH_BANKS; ++i) {
+	for (i=0; i < CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
 		ulong flashbase = (i == 0) ? PHYS_FLASH_1 : PHYS_FLASH_2;
 		ulong * buscon = (ulong *)
 			((i == 0) ? INCA_IP_EBU_EBU_BUSCON0 : INCA_IP_EBU_EBU_BUSCON2);
@@ -96,20 +96,20 @@ unsigned long flash_init (void)
 		size += flash_info[i].size;
 	}
 
-#if CFG_MONITOR_BASE >= CFG_FLASH_BASE
+#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE
 	/* monitor protection ON by default */
 	flash_protect(FLAG_PROTECT_SET,
-		      CFG_MONITOR_BASE,
-		      CFG_MONITOR_BASE+monitor_flash_len-1,
-		      flash_get_info(CFG_MONITOR_BASE));
+		      CONFIG_SYS_MONITOR_BASE,
+		      CONFIG_SYS_MONITOR_BASE+monitor_flash_len-1,
+		      flash_get_info(CONFIG_SYS_MONITOR_BASE));
 #endif
 
-#ifdef	CFG_ENV_IS_IN_FLASH
+#ifdef	CONFIG_ENV_IS_IN_FLASH
 	/* ENV protection ON by default */
 	flash_protect(FLAG_PROTECT_SET,
-		      CFG_ENV_ADDR,
-		      CFG_ENV_ADDR+CFG_ENV_SIZE-1,
-		      flash_get_info(CFG_ENV_ADDR));
+		      CONFIG_ENV_ADDR,
+		      CONFIG_ENV_ADDR+CONFIG_ENV_SIZE-1,
+		      flash_get_info(CONFIG_ENV_ADDR));
 #endif
 
 
@@ -173,13 +173,13 @@ static flash_info_t *flash_get_info(ulong base)
 	int i;
 	flash_info_t * info;
 
-	for (i = 0; i < CFG_MAX_FLASH_BANKS; i ++) {
+	for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i ++) {
 		info = & flash_info[i];
 		if (info->start[0] <= base && base < info->start[0] + info->size)
 			break;
 	}
 
-	return i == CFG_MAX_FLASH_BANKS ? 0 : info;
+	return i == CONFIG_SYS_MAX_FLASH_BANKS ? 0 : info;
 }
 
 /*-----------------------------------------------------------------------
@@ -484,7 +484,7 @@ int	flash_erase (flash_info_t *info, int s_first, int s_last)
 		udelay (1000);
 
 		while ((*addr & (FPW)0x00800080) != (FPW)0x00800080) {
-			if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+			if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
 				printf ("Timeout\n");
 
 				if (intel) {
@@ -498,14 +498,14 @@ int	flash_erase (flash_info_t *info, int s_first, int s_last)
 			}
 
 			/* show that we're waiting */
-			if ((get_timer(last)) > CFG_HZ) {/* every second */
+			if ((get_timer(last)) > CONFIG_SYS_HZ) {/* every second */
 				putc ('.');
 				last = get_timer(0);
 			}
 		}
 
 		/* show that we're waiting */
-		if ((get_timer(last)) > CFG_HZ) {	/* every second */
+		if ((get_timer(last)) > CONFIG_SYS_HZ) {	/* every second */
 			putc ('.');
 			last = get_timer(0);
 		}
@@ -609,7 +609,7 @@ static int write_word_amd (flash_info_t *info, FPWV *dest, FPW data)
 
     /* data polling for D7 */
     while (res == 0 && (*dest & (FPW)0x00800080) != (data & (FPW)0x00800080)) {
-	if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+	if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
 	    *dest = (FPW)0x00F000F0;	/* reset bank */
 	    res = 1;
 	}
@@ -655,7 +655,7 @@ static int write_word_intel (flash_info_t *info, FPWV *dest, FPW data)
     start = get_timer (0);
 
     while (res == 0 && (*dest & (FPW)0x00800080) != (FPW)0x00800080) {
-	if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+	if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
 	    *dest = (FPW)0x00B000B0;	/* Suspend program	*/
 	    res = 1;
 	}
diff --git a/board/incaip/incaip.c b/board/incaip/incaip.c
index ac7ad8f29..3b30970b9 100644
--- a/board/incaip/incaip.c
+++ b/board/incaip/incaip.c
@@ -23,6 +23,7 @@
 
 #include <common.h>
 #include <command.h>
+#include <netdev.h>
 #include <asm/addrspace.h>
 #include <asm/inca-ip.h>
 #include <asm/io.h>
@@ -39,16 +40,16 @@ static ulong max_sdram_size(void)
 {
 	/* The only supported SDRAM data width is 16bit.
 	 */
-#define CFG_DW	2
+#define CONFIG_SYS_DW	2
 
 	/* The only supported number of SDRAM banks is 4.
 	 */
-#define CFG_NB	4
+#define CONFIG_SYS_NB	4
 
 	ulong cfgpb0 = *INCA_IP_SDRAM_MC_CFGPB0;
 	int   cols   = cfgpb0 & 0xF;
 	int   rows   = (cfgpb0 & 0xF0) >> 4;
-	ulong size   = (1 << (rows + cols)) * CFG_DW * CFG_NB;
+	ulong size   = (1 << (rows + cols)) * CONFIG_SYS_DW * CONFIG_SYS_NB;
 
 	return size;
 }
@@ -74,7 +75,7 @@ phys_size_t initdram(int board_type)
 		{
 			*INCA_IP_SDRAM_MC_CFGPB0 = (0x14 << 8) |
 			                           (rows << 4) | cols;
-			size = get_ram_size((long *)CFG_SDRAM_BASE,
+			size = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE,
 			                                     max_sdram_size());
 
 			if (size > max_size)
@@ -116,3 +117,10 @@ int checkboard (void)
 
 	return 0;
 }
+
+#if defined(CONFIG_INCA_IP_SWITCH)
+int board_eth_init(bd_t *bis)
+{
+	return inca_switch_initialize(bis);
+}
+#endif
diff --git a/board/incaip/u-boot.lds b/board/incaip/u-boot.lds
index 1e1c5590d..da20de1ad 100644
--- a/board/incaip/u-boot.lds
+++ b/board/incaip/u-boot.lds
@@ -65,6 +65,6 @@ SECTIONS
 
 	. = ALIGN(4);
 	.sbss (NOLOAD)  : { *(.sbss) }
-	.bss (NOLOAD)  : { *(.bss) }
+	.bss (NOLOAD)  : { *(.bss) . = ALIGN(4); }
 	uboot_end = .;
 }
diff --git a/board/inka4x0/inka4x0.c b/board/inka4x0/inka4x0.c
index a2e35ff0f..507196bb2 100644
--- a/board/inka4x0/inka4x0.c
+++ b/board/inka4x0/inka4x0.c
@@ -45,7 +45,7 @@
 #error "INKA4x0 SDRAM: invalid chip type specified!"
 #endif
 
-#ifndef CFG_RAMBOOT
+#ifndef CONFIG_SYS_RAMBOOT
 static void sdram_start (int hi_addr)
 {
 	long hi_addr_bit = hi_addr ? 0x01000000 : 0;
@@ -88,14 +88,14 @@ static void sdram_start (int hi_addr)
 
 /*
  * ATTENTION: Although partially referenced initdram does NOT make real use
- *	      use of CFG_SDRAM_BASE. The code does not work if CFG_SDRAM_BASE
+ *	      use of CONFIG_SYS_SDRAM_BASE. The code does not work if CONFIG_SYS_SDRAM_BASE
  *	      is something else than 0x00000000.
  */
 
 phys_size_t initdram (int board_type)
 {
 	ulong dramsize = 0;
-#ifndef CFG_RAMBOOT
+#ifndef CONFIG_SYS_RAMBOOT
 	long test1, test2;
 
 	/* setup SDRAM chip selects */
@@ -116,9 +116,9 @@ phys_size_t initdram (int board_type)
 
 	/* find RAM size using SDRAM CS0 only */
 	sdram_start(0);
-	test1 = get_ram_size((long *)CFG_SDRAM_BASE, 0x20000000);
+	test1 = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE, 0x20000000);
 	sdram_start(1);
-	test2 = get_ram_size((long *)CFG_SDRAM_BASE, 0x20000000);
+	test2 = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE, 0x20000000);
 	if (test1 > test2) {
 		sdram_start(0);
 		dramsize = test1;
@@ -140,7 +140,7 @@ phys_size_t initdram (int board_type)
 	}
 
 	*(vu_long *)MPC5XXX_SDRAM_CS1CFG = dramsize; /* disabled */
-#else /* CFG_RAMBOOT */
+#else /* CONFIG_SYS_RAMBOOT */
 
 	/* retrieve size of memory connected to SDRAM CS0 */
 	dramsize = *(vu_long *)MPC5XXX_SDRAM_CS0CFG & 0xFF;
@@ -149,7 +149,7 @@ phys_size_t initdram (int board_type)
 	} else {
 		dramsize = 0;
 	}
-#endif /* CFG_RAMBOOT */
+#endif /* CONFIG_SYS_RAMBOOT */
 
 	return dramsize;
 }
@@ -179,7 +179,7 @@ int misc_init_f (void)
 	i = getenv_r("brightness", tmp, sizeof(tmp));
 	br = (i > 0)
 		? (int) simple_strtoul (tmp, NULL, 10)
-		: CFG_BRIGHTNESS;
+		: CONFIG_SYS_BRIGHTNESS;
 	if (br > 255)
 		br = 255;
 
diff --git a/board/innokom/flash.c b/board/innokom/flash.c
index 8fc6e5bd9..8c95341b6 100644
--- a/board/innokom/flash.c
+++ b/board/innokom/flash.c
@@ -72,7 +72,7 @@
 #define MAIN_SECT_SIZE  0x00020000	/* 128k per sector                  */
 #endif
 
-flash_info_t    flash_info[CFG_MAX_FLASH_BANKS];
+flash_info_t    flash_info[CONFIG_SYS_MAX_FLASH_BANKS];
 
 /**
  * flash_init: - initialize data structures for flash chips
@@ -85,14 +85,14 @@ ulong flash_init(void)
 	int i, j;
 	ulong size = 0;
 
-	for (i = 0; i < CFG_MAX_FLASH_BANKS; i++) {
+	for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) {
 		ulong flashbase = 0;
 		flash_info[i].flash_id =
 			(INTEL_MANUFACT & FLASH_VENDMASK) |
 			(INTEL_ID_28F128J3 & FLASH_TYPEMASK);
 		flash_info[i].size = FLASH_BANK_SIZE;
-		flash_info[i].sector_count = CFG_MAX_FLASH_SECT;
-		memset(flash_info[i].protect, 0, CFG_MAX_FLASH_SECT);
+		flash_info[i].sector_count = CONFIG_SYS_MAX_FLASH_SECT;
+		memset(flash_info[i].protect, 0, CONFIG_SYS_MAX_FLASH_SECT);
 
 		switch (i) {
 			case 0:
@@ -110,14 +110,14 @@ ulong flash_init(void)
 
 	/* Protect u-boot sectors */
 	flash_protect(FLAG_PROTECT_SET,
-			CFG_FLASH_BASE,
-			CFG_FLASH_BASE + (256*1024) - 1,
+			CONFIG_SYS_FLASH_BASE,
+			CONFIG_SYS_FLASH_BASE + (256*1024) - 1,
 			&flash_info[0]);
 
-#ifdef CFG_ENV_IS_IN_FLASH
+#ifdef CONFIG_ENV_IS_IN_FLASH
 	flash_protect(FLAG_PROTECT_SET,
-			CFG_ENV_ADDR,
-			CFG_ENV_ADDR + CFG_ENV_SIZE - 1,
+			CONFIG_ENV_ADDR,
+			CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1,
 			&flash_info[0]);
 #endif
 
@@ -135,7 +135,7 @@ void flash_print_info  (flash_info_t *info)
 {
 	int i, j;
 
-	for (j=0; j<CFG_MAX_FLASH_BANKS; j++) {
+	for (j=0; j<CONFIG_SYS_MAX_FLASH_BANKS; j++) {
 
 		switch (info->flash_id & FLASH_VENDMASK) {
 
@@ -235,7 +235,7 @@ int flash_erase(flash_info_t *info, int s_first, int s_last)
 
 			while ((*addr & 0x0080) != 0x0080) {
 				PRINTK(".");
-				if (get_timer_masked() > CFG_FLASH_ERASE_TOUT) {
+				if (get_timer_masked() > CONFIG_SYS_FLASH_ERASE_TOUT) {
 					*addr = 0x00B0; /* suspend erase*/
 					*addr = 0x00FF; /* read mode    */
 					rc = ERR_TIMOUT;
@@ -306,7 +306,7 @@ static int write_word (flash_info_t *info, ulong dest, ushort data)
 
 	/* wait while polling the status register */
 	while(((val = *addr) & 0x80) != 0x80) {
-		if (get_timer_masked() > CFG_FLASH_WRITE_TOUT) {
+		if (get_timer_masked() > CONFIG_SYS_FLASH_WRITE_TOUT) {
 			rc = ERR_TIMOUT;
 			*addr = 0xB0; /* suspend program command */
 			goto outahere;
diff --git a/board/innokom/lowlevel_init.S b/board/innokom/lowlevel_init.S
index 4c9f10ffb..9892430a1 100644
--- a/board/innokom/lowlevel_init.S
+++ b/board/innokom/lowlevel_init.S
@@ -29,7 +29,7 @@
 #include <version.h>
 #include <asm/arch/pxa-regs.h>
 
-DRAM_SIZE:  .long   CFG_DRAM_SIZE
+DRAM_SIZE:  .long   CONFIG_SYS_DRAM_SIZE
 
 /* wait for coprocessor write complete */
    .macro CPWAIT reg
@@ -54,71 +54,71 @@ lowlevel_init:
 	/* Set up GPIO pins first ----------------------------------------- */
 
 	ldr		r0,	=GPSR0
-	ldr		r1,	=CFG_GPSR0_VAL
+	ldr		r1,	=CONFIG_SYS_GPSR0_VAL
 	str		r1,   [r0]
 
 	ldr		r0,	=GPSR1
-	ldr		r1,	=CFG_GPSR1_VAL
+	ldr		r1,	=CONFIG_SYS_GPSR1_VAL
 	str		r1,   [r0]
 
 	ldr		r0,	=GPSR2
-	ldr		r1,	=CFG_GPSR2_VAL
+	ldr		r1,	=CONFIG_SYS_GPSR2_VAL
 	str		r1,   [r0]
 
 	ldr		r0,	=GPCR0
-	ldr		r1,	=CFG_GPCR0_VAL
+	ldr		r1,	=CONFIG_SYS_GPCR0_VAL
 	str		r1,   [r0]
 
 	ldr		r0,	=GPCR1
-	ldr		r1,	=CFG_GPCR1_VAL
+	ldr		r1,	=CONFIG_SYS_GPCR1_VAL
 	str		r1,   [r0]
 
 	ldr		r0,	=GPCR2
-	ldr		r1,	=CFG_GPCR2_VAL
+	ldr		r1,	=CONFIG_SYS_GPCR2_VAL
 	str		r1,   [r0]
 
 	ldr		r0,	=GPDR0
-	ldr		r1,	=CFG_GPDR0_VAL
+	ldr		r1,	=CONFIG_SYS_GPDR0_VAL
 	str		r1,   [r0]
 
 	ldr		r0,	=GPDR1
-	ldr		r1,	=CFG_GPDR1_VAL
+	ldr		r1,	=CONFIG_SYS_GPDR1_VAL
 	str		r1,   [r0]
 
 	ldr		r0,	=GPDR2
-	ldr		r1,	=CFG_GPDR2_VAL
+	ldr		r1,	=CONFIG_SYS_GPDR2_VAL
 	str		r1,   [r0]
 
 	ldr		r0,	=GAFR0_L
-	ldr		r1,	=CFG_GAFR0_L_VAL
+	ldr		r1,	=CONFIG_SYS_GAFR0_L_VAL
 	str		r1,   [r0]
 
 	ldr		r0,	=GAFR0_U
-	ldr		r1,	=CFG_GAFR0_U_VAL
+	ldr		r1,	=CONFIG_SYS_GAFR0_U_VAL
 	str		r1,   [r0]
 
 	ldr		r0,	=GAFR1_L
-	ldr		r1,	=CFG_GAFR1_L_VAL
+	ldr		r1,	=CONFIG_SYS_GAFR1_L_VAL
 	str		r1,   [r0]
 
 	ldr		r0,	=GAFR1_U
-	ldr		r1,	=CFG_GAFR1_U_VAL
+	ldr		r1,	=CONFIG_SYS_GAFR1_U_VAL
 	str		r1,   [r0]
 
 	ldr		r0,	=GAFR2_L
-	ldr		r1,	=CFG_GAFR2_L_VAL
+	ldr		r1,	=CONFIG_SYS_GAFR2_L_VAL
 	str		r1,   [r0]
 
 	ldr		r0,	=GAFR2_U
-	ldr		r1,	=CFG_GAFR2_U_VAL
+	ldr		r1,	=CONFIG_SYS_GAFR2_U_VAL
 	str		r1,   [r0]
 
 	ldr	r0,	=PSSR		/* enable GPIO pins */
-	ldr		r1,	=CFG_PSSR_VAL
+	ldr		r1,	=CONFIG_SYS_PSSR_VAL
 	str		r1,   [r0]
 
 /*	ldr	r3,	=MSC1		/  low - bank 2 Lubbock Registers / SRAM */
-/*	ldr	r2,	=CFG_MSC1_VAL	/  high - bank 3 Ethernet Controller */
+/*	ldr	r2,	=CONFIG_SYS_MSC1_VAL	/  high - bank 3 Ethernet Controller */
 /*	str	r2,	[r3]		/  need to set MSC1 before trying to write to the HEX LEDs */
 /*	ldr	r2,	[r3]		/  need to read it back to make sure the value latches (see MSC section of manual) */
 /* */
@@ -168,17 +168,17 @@ mem_init:
 	/* MSC registers: timing, bus width, mem type                       */
 
 	/* MSC0: nCS(0,1)                                                   */
-	ldr     r2,   =CFG_MSC0_VAL
+	ldr     r2,   =CONFIG_SYS_MSC0_VAL
 	str     r2,   [r1, #MSC0_OFFSET]
 	ldr     r2,   [r1, #MSC0_OFFSET]	/* read back to ensure      */
 						/* that data latches        */
 	/* MSC1: nCS(2,3)                                                   */
-	ldr     r2,  =CFG_MSC1_VAL
+	ldr     r2,  =CONFIG_SYS_MSC1_VAL
 	str     r2,  [r1, #MSC1_OFFSET]
 	ldr     r2,  [r1, #MSC1_OFFSET]
 
 	/* MSC2: nCS(4,5)                                                   */
-	ldr     r2,  =CFG_MSC2_VAL
+	ldr     r2,  =CONFIG_SYS_MSC2_VAL
 	str     r2,  [r1, #MSC2_OFFSET]
 	ldr     r2,  [r1, #MSC2_OFFSET]
 
@@ -187,37 +187,37 @@ mem_init:
 	/* ---------------------------------------------------------------- */
 
 	/* MECR: Memory Expansion Card Register                             */
-	ldr     r2,  =CFG_MECR_VAL
+	ldr     r2,  =CONFIG_SYS_MECR_VAL
 	str     r2,  [r1, #MECR_OFFSET]
 	ldr	r2,	[r1, #MECR_OFFSET]
 
 	/* MCMEM0: Card Interface slot 0 timing                             */
-	ldr     r2,  =CFG_MCMEM0_VAL
+	ldr     r2,  =CONFIG_SYS_MCMEM0_VAL
 	str     r2,  [r1, #MCMEM0_OFFSET]
 	ldr	r2,	[r1, #MCMEM0_OFFSET]
 
 	/* MCMEM1: Card Interface slot 1 timing                             */
-	ldr     r2,  =CFG_MCMEM1_VAL
+	ldr     r2,  =CONFIG_SYS_MCMEM1_VAL
 	str     r2,  [r1, #MCMEM1_OFFSET]
 	ldr	r2,	[r1, #MCMEM1_OFFSET]
 
 	/* MCATT0: Card Interface Attribute Space Timing, slot 0            */
-	ldr     r2,  =CFG_MCATT0_VAL
+	ldr     r2,  =CONFIG_SYS_MCATT0_VAL
 	str     r2,  [r1, #MCATT0_OFFSET]
 	ldr	r2,	[r1, #MCATT0_OFFSET]
 
 	/* MCATT1: Card Interface Attribute Space Timing, slot 1            */
-	ldr     r2,  =CFG_MCATT1_VAL
+	ldr     r2,  =CONFIG_SYS_MCATT1_VAL
 	str     r2,  [r1, #MCATT1_OFFSET]
 	ldr	r2,	[r1, #MCATT1_OFFSET]
 
 	/* MCIO0: Card Interface I/O Space Timing, slot 0                   */
-	ldr     r2,  =CFG_MCIO0_VAL
+	ldr     r2,  =CONFIG_SYS_MCIO0_VAL
 	str     r2,  [r1, #MCIO0_OFFSET]
 	ldr	r2,	[r1, #MCIO0_OFFSET]
 
 	/* MCIO1: Card Interface I/O Space Timing, slot 1                   */
-	ldr     r2,  =CFG_MCIO1_VAL
+	ldr     r2,  =CONFIG_SYS_MCIO1_VAL
 	str     r2,  [r1, #MCIO1_OFFSET]
 	ldr	r2,	[r1, #MCIO1_OFFSET]
 
@@ -239,7 +239,7 @@ mem_init:
 	/* Before accessing MDREFR we need a valid DRI field, so we set     */
 	/* this to power on defaults + DRI field.                           */
 
-	ldr	r3,	=CFG_MDREFR_VAL
+	ldr	r3,	=CONFIG_SYS_MDREFR_VAL
 	ldr	r2,	=0xFFF
 	and	r3,	r3, r2
 	ldr	r4,	=0x03ca4000
@@ -269,7 +269,7 @@ mem_init:
 	/* Step 4a: assert MDREFR:K?RUN and configure                       */
 	/*          MDREFR:K1DB2 and MDREFR:K2DB2 as desired.               */
 
-	ldr	r4,	=CFG_MDREFR_VAL
+	ldr	r4,	=CONFIG_SYS_MDREFR_VAL
 	str	r4,	[r1, #MDREFR_OFFSET]	/* write back MDREFR        */
 	ldr	r4,	[r1, #MDREFR_OFFSET]
 
@@ -292,7 +292,7 @@ mem_init:
 	/* Step 4d: write MDCNFG with MDCNFG:DEx deasserted (set to 0), to  */
 	/*          configure but not enable each SDRAM partition pair.     */
 
-	ldr	r4,	=CFG_MDCNFG_VAL
+	ldr	r4,	=CONFIG_SYS_MDCNFG_VAL
 	bic	r4,	r4,	#(MDCNFG_DE0|MDCNFG_DE1)
 
 	str     r4,     [r1, #MDCNFG_OFFSET]	/* write back MDCNFG        */
@@ -325,7 +325,7 @@ mem_init:
 	/*          Jan 2003, Errata #116, page 30.                         */
 
 
-	ldr	r3,	=CFG_DRAM_BASE
+	ldr	r3,	=CONFIG_SYS_DRAM_BASE
 	str	r2, [r3]
 	str	r2, [r3]
 	str	r2, [r3]
@@ -345,7 +345,7 @@ mem_init:
 
 	/* Step 4h: Write MDMRS.                                            */
 
-	ldr     r2,  =CFG_MDMRS_VAL
+	ldr     r2,  =CONFIG_SYS_MDMRS_VAL
 	str     r2,  [r1, #MDMRS_OFFSET]
 
 
diff --git a/board/innokom/u-boot.lds b/board/innokom/u-boot.lds
index 14d264a68..7cf9fdf63 100644
--- a/board/innokom/u-boot.lds
+++ b/board/innokom/u-boot.lds
@@ -51,6 +51,6 @@ SECTIONS
 
 	. = ALIGN(4);
 	__bss_start = .;
-	.bss (NOLOAD) : { *(.bss) }
+	.bss (NOLOAD) : { *(.bss) . = ALIGN(4); }
 	_end = .;
 }
diff --git a/board/integratorap/flash.c b/board/integratorap/flash.c
index b120d63eb..0492be762 100644
--- a/board/integratorap/flash.c
+++ b/board/integratorap/flash.c
@@ -32,7 +32,7 @@
 #include <linux/byteorder/swab.h>
 
 #define PHYS_FLASH_SECT_SIZE	0x00020000	/* 256 KB sectors (x2) */
-flash_info_t flash_info[CFG_MAX_FLASH_BANKS];	/* info for FLASH chips    */
+flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];	/* info for FLASH chips    */
 
 /* Board support for 1 or 2 flash devices */
 #undef FLASH_PORT_WIDTH32
@@ -88,7 +88,7 @@ unsigned long flash_init (void)
 {
 	int i;
 	ulong size = 0;
-	for (i = 0; i < CFG_MAX_FLASH_BANKS; i++) {
+	for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) {
 		switch (i) {
 		case 0:
 			flash_get_size ((FPW *) PHYS_FLASH_1, &flash_info[i]);
@@ -104,8 +104,8 @@ unsigned long flash_init (void)
 	/* Protect monitor and environment sectors
 	 */
 	flash_protect (FLAG_PROTECT_SET,
-			CFG_FLASH_BASE,
-			CFG_FLASH_BASE + monitor_flash_len - 1, &flash_info[0]);
+			CONFIG_SYS_FLASH_BASE,
+			CONFIG_SYS_FLASH_BASE + monitor_flash_len - 1, &flash_info[0]);
 
 	return size;
 }
@@ -223,10 +223,10 @@ static ulong flash_get_size (FPW * addr, flash_info_t * info)
 		break;
 	}
 
-	if (info->sector_count > CFG_MAX_FLASH_SECT) {
+	if (info->sector_count > CONFIG_SYS_MAX_FLASH_SECT) {
 		printf ("** ERROR: sector count %d > max (%d) **\n",
-				info->sector_count, CFG_MAX_FLASH_SECT);
-		info->sector_count = CFG_MAX_FLASH_SECT;
+				info->sector_count, CONFIG_SYS_MAX_FLASH_SECT);
+		info->sector_count = CONFIG_SYS_MAX_FLASH_SECT;
 	}
 
 	addr[0] = (FPW) 0x00FF00FF;	/* restore read mode */
@@ -318,7 +318,7 @@ int flash_erase (flash_info_t * info, int s_first, int s_last)
 				*addr) & (FPW) 0x00800080) !=
 				(FPW) 0x00800080) {
 					if (get_timer_masked () >
-					CFG_FLASH_ERASE_TOUT) {
+					CONFIG_SYS_FLASH_ERASE_TOUT) {
 					printf ("Timeout\n");
 					/* suspend erase     */
 					*addr = (FPW) 0x00B000B0;
@@ -454,7 +454,7 @@ static int write_data (flash_info_t * info, ulong dest, FPW data)
 
 	/* wait while polling the status register */
 	while (((status = *addr) & (FPW) 0x00800080) != (FPW) 0x00800080) {
-		if (get_timer_masked () > CFG_FLASH_WRITE_TOUT) {
+		if (get_timer_masked () > CONFIG_SYS_FLASH_WRITE_TOUT) {
 			*addr = (FPW) 0x00FF00FF;	/* restore read mode */
 			return (1);
 		}
diff --git a/board/integratorap/integratorap.c b/board/integratorap/integratorap.c
index e65990756..ddacabb2e 100644
--- a/board/integratorap/integratorap.c
+++ b/board/integratorap/integratorap.c
@@ -39,6 +39,8 @@
 #include <pci.h>
 #endif
 
+#include <netdev.h>
+
 DECLARE_GLOBAL_DATA_PTR;
 
 void flash__init (void);
@@ -517,7 +519,7 @@ extern void dram_query(void);
  * can be divided by 16 or 256
  * and is a 16-bit counter
  */
-/* U-Boot expects a 32 bit timer running at CFG_HZ*/
+/* U-Boot expects a 32 bit timer running at CONFIG_SYS_HZ*/
 static ulong timestamp;		/* U-Boot ticks since startup	      */
 static ulong total_count = 0;	/* Total timer count		      */
 static ulong lastdec;		/* Timer reading at last call	      */
@@ -525,12 +527,12 @@ static ulong div_clock	 = 256; /* Divisor applied to the timer clock */
 static ulong div_timer	 = 1;	/* Divisor to convert timer reading
 				 * change to U-Boot ticks
 				 */
-/* CFG_HZ = CFG_HZ_CLOCK/(div_clock * div_timer) */
+/* CONFIG_SYS_HZ = CONFIG_SYS_HZ_CLOCK/(div_clock * div_timer) */
 
 #define TIMER_LOAD_VAL 0x0000FFFFL
-#define READ_TIMER ((*(volatile ulong *)(CFG_TIMERBASE+4)) & 0x0000FFFFL)
+#define READ_TIMER ((*(volatile ulong *)(CONFIG_SYS_TIMERBASE+4)) & 0x0000FFFFL)
 
-/* all function return values in U-Boot ticks i.e. (1/CFG_HZ) sec
+/* all function return values in U-Boot ticks i.e. (1/CONFIG_SYS_HZ) sec
  *  - unless otherwise stated
  */
 
@@ -541,7 +543,7 @@ static ulong div_timer	 = 1;	/* Divisor to convert timer reading
 int interrupt_init (void)
 {
 	/* Load timer with initial value */
-	*(volatile ulong *)(CFG_TIMERBASE + 0) = TIMER_LOAD_VAL;
+	*(volatile ulong *)(CONFIG_SYS_TIMERBASE + 0) = TIMER_LOAD_VAL;
 	/* Set timer to be
 	 *	enabled		  1
 	 *	free-running	  0
@@ -549,12 +551,12 @@ int interrupt_init (void)
 	 *	divider 256	 10
 	 *	XX		 00
 	 */
-	*(volatile ulong *)(CFG_TIMERBASE + 8) = 0x00000088;
+	*(volatile ulong *)(CONFIG_SYS_TIMERBASE + 8) = 0x00000088;
 	total_count = 0;
 	/* init the timestamp and lastdec value */
 	reset_timer_masked();
 
-	div_timer  = CFG_HZ_CLOCK / CFG_HZ;
+	div_timer  = CONFIG_SYS_HZ_CLOCK / CONFIG_SYS_HZ;
 	div_timer /= div_clock;
 
 	return (0);
@@ -586,7 +588,7 @@ void udelay (unsigned long usec)
 	ulong tmo, tmp;
 
 	/* Convert to U-Boot ticks */
-	tmo  = usec * CFG_HZ;
+	tmo  = usec * CONFIG_SYS_HZ;
 	tmo /= (1000000L);
 
 	tmp  = get_timer_masked();	/* get current timestamp */
@@ -645,5 +647,10 @@ unsigned long long get_ticks(void)
  */
 ulong get_tbclk (void)
 {
-	return CFG_HZ_CLOCK/div_clock;
+	return CONFIG_SYS_HZ_CLOCK/div_clock;
+}
+
+int board_eth_init(bd_t *bis)
+{
+	return pci_eth_init(bis);
 }
diff --git a/board/integratorcp/flash.c b/board/integratorcp/flash.c
index 59961cdab..5059daeec 100644
--- a/board/integratorcp/flash.c
+++ b/board/integratorcp/flash.c
@@ -37,7 +37,7 @@
 #define DEBUG
 
 #define PHYS_FLASH_SECT_SIZE	0x00040000	/* 256 KB sectors (x2) */
-flash_info_t flash_info[CFG_MAX_FLASH_BANKS];	/* info for FLASH chips */
+flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];	/* info for FLASH chips */
 
 /* Board support for 1 or 2 flash devices */
 #define FLASH_PORT_WIDTH32
@@ -106,30 +106,30 @@ unsigned long flash_init (void)
 	else
 		nbanks = 1;
 
-	if (nbanks > CFG_MAX_FLASH_BANKS)
-		nbanks = CFG_MAX_FLASH_BANKS;
+	if (nbanks > CONFIG_SYS_MAX_FLASH_BANKS)
+		nbanks = CONFIG_SYS_MAX_FLASH_BANKS;
 
 	/* Enable flash write */
 	cpcr[1] |= 3;
 
 	for (i = 0; i < nbanks; i++) {
-		flash_get_size ((FPW *)(CFG_FLASH_BASE + size), &flash_info[i]);
-		flash_get_offsets (CFG_FLASH_BASE + size, &flash_info[i]);
+		flash_get_size ((FPW *)(CONFIG_SYS_FLASH_BASE + size), &flash_info[i]);
+		flash_get_offsets (CONFIG_SYS_FLASH_BASE + size, &flash_info[i]);
 		size += flash_info[i].size;
 	}
 
-#if CFG_MONITOR_BASE >= CFG_FLASH_BASE
+#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE
 	/* monitor protection */
 	flash_protect (FLAG_PROTECT_SET,
-		       CFG_MONITOR_BASE,
-		       CFG_MONITOR_BASE + monitor_flash_len - 1, &flash_info[0]);
+		       CONFIG_SYS_MONITOR_BASE,
+		       CONFIG_SYS_MONITOR_BASE + monitor_flash_len - 1, &flash_info[0]);
 #endif
 
-#ifdef CFG_ENV_IS_IN_FLASH
+#ifdef CONFIG_ENV_IS_IN_FLASH
 	/* ENV protection ON */
 	flash_protect(FLAG_PROTECT_SET,
-		      CFG_ENV_ADDR,
-		      CFG_ENV_ADDR + CFG_ENV_SECT_SIZE - 1,
+		      CONFIG_ENV_ADDR,
+		      CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE - 1,
 		      &flash_info[0]);
 #endif
 
@@ -228,8 +228,8 @@ static ulong flash_get_size (FPW * addr, flash_info_t * info)
 	else
 		nsects = 64;
 
-	if (nsects > CFG_MAX_FLASH_SECT)
-		nsects = CFG_MAX_FLASH_SECT;
+	if (nsects > CONFIG_SYS_MAX_FLASH_SECT)
+		nsects = CONFIG_SYS_MAX_FLASH_SECT;
 
 	/* Write auto select command: read Manufacturer ID */
 	addr[0x5555] = (FPW) 0x00AA00AA;
@@ -280,10 +280,10 @@ static ulong flash_get_size (FPW * addr, flash_info_t * info)
 		break;
 	}
 
-	if (info->sector_count > CFG_MAX_FLASH_SECT) {
+	if (info->sector_count > CONFIG_SYS_MAX_FLASH_SECT) {
 		printf ("** ERROR: sector count %d > max (%d) **\n",
-				info->sector_count, CFG_MAX_FLASH_SECT);
-		info->sector_count = CFG_MAX_FLASH_SECT;
+				info->sector_count, CONFIG_SYS_MAX_FLASH_SECT);
+		info->sector_count = CONFIG_SYS_MAX_FLASH_SECT;
 	}
 
 	addr[0] = (FPW) 0x00FF00FF;	/* restore read mode */
@@ -308,7 +308,7 @@ void flash_unprotect_sectors (FPWV * addr)
 
 	reset_timer_masked();
 	while (((status = *addr) & (FPW)0x00800080) != 0x00800080) {
-		if (get_timer_masked() > CFG_FLASH_ERASE_TOUT) {
+		if (get_timer_masked() > CONFIG_SYS_FLASH_ERASE_TOUT) {
 			printf("Timeout");
 			break;
 		}
@@ -384,7 +384,7 @@ int flash_erase (flash_info_t * info, int s_first, int s_last)
 				enable_interrupts();
 
 			while (((status = *addr) & (FPW) 0x00800080) != (FPW) 0x00800080) {
-				if (get_timer_masked () > CFG_FLASH_ERASE_TOUT) {
+				if (get_timer_masked () > CONFIG_SYS_FLASH_ERASE_TOUT) {
 					*addr = (FPW)0x00700070;
 					status = *addr;
 					if ((status & (FPW) 0x00400040) == (FPW) 0x00400040) {
@@ -538,7 +538,7 @@ static int write_data (flash_info_t * info, ulong dest, FPW data)
 
 	/* wait while polling the status register */
 	while (((status = *addr) & (FPW) 0x00800080) != (FPW) 0x00800080) {
-		if (get_timer_masked () > CFG_FLASH_WRITE_TOUT) {
+		if (get_timer_masked () > CONFIG_SYS_FLASH_WRITE_TOUT) {
 #ifdef DEBUG
 			*addr = (FPW) 0x00700070;
 			status = *addr;
diff --git a/board/integratorcp/integratorcp.c b/board/integratorcp/integratorcp.c
index d6d6e13d5..72629ce2b 100644
--- a/board/integratorcp/integratorcp.c
+++ b/board/integratorcp/integratorcp.c
@@ -34,6 +34,7 @@
  */
 
 #include <common.h>
+#include <div64.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -142,7 +143,7 @@ extern void dram_query(void);
  * can be divided by 16 or 256
  * and can be set up as a 32-bit timer
  */
-/* U-Boot expects a 32 bit timer, running at CFG_HZ */
+/* U-Boot expects a 32 bit timer, running at CONFIG_SYS_HZ */
 /* Keep total timer count to avoid losing decrements < div_timer */
 static unsigned long long total_count = 0;
 static unsigned long long lastdec;	 /* Timer reading at last call	   */
@@ -150,13 +151,13 @@ static unsigned long long div_clock = 1; /* Divisor applied to timer clock */
 static unsigned long long div_timer = 1; /* Divisor to convert timer reading
 					  * change to U-Boot ticks
 					  */
-/* CFG_HZ = CFG_HZ_CLOCK/(div_clock * div_timer) */
+/* CONFIG_SYS_HZ = CONFIG_SYS_HZ_CLOCK/(div_clock * div_timer) */
 static ulong timestamp;		/* U-Boot ticks since startup	      */
 
 #define TIMER_LOAD_VAL ((ulong)0xFFFFFFFF)
-#define READ_TIMER (*(volatile ulong *)(CFG_TIMERBASE+4))
+#define READ_TIMER (*(volatile ulong *)(CONFIG_SYS_TIMERBASE+4))
 
-/* all function return values in U-Boot ticks i.e. (1/CFG_HZ) sec
+/* all function return values in U-Boot ticks i.e. (1/CONFIG_SYS_HZ) sec
  *  - unless otherwise stated
  */
 
@@ -165,7 +166,7 @@ static ulong timestamp;		/* U-Boot ticks since startup	      */
 int interrupt_init (void)
 {
 	/* Load timer with initial value */
-	*(volatile ulong *)(CFG_TIMERBASE + 0) = TIMER_LOAD_VAL;
+	*(volatile ulong *)(CONFIG_SYS_TIMERBASE + 0) = TIMER_LOAD_VAL;
 	/* Set timer to be
 	 *	enabled		  1
 	 *	periodic	  1
@@ -175,12 +176,12 @@ int interrupt_init (void)
 	 *	32 bit		  1
 	 *	wrapping	  0
 	 */
-	*(volatile ulong *)(CFG_TIMERBASE + 8) = 0x000000C2;
+	*(volatile ulong *)(CONFIG_SYS_TIMERBASE + 8) = 0x000000C2;
 	/* init the timestamp */
 	total_count = 0ULL;
 	reset_timer_masked();
 
-	div_timer  = (unsigned long long)(CFG_HZ_CLOCK / CFG_HZ);
+	div_timer  = (unsigned long long)(CONFIG_SYS_HZ_CLOCK / CONFIG_SYS_HZ);
 	div_timer /= div_clock;
 
 	return (0);
@@ -211,7 +212,7 @@ void udelay (unsigned long usec)
 	ulong tmo, tmp;
 
 	/* Convert to U-Boot ticks */
-	tmo  = usec * CFG_HZ;
+	tmo  = usec * CONFIG_SYS_HZ;
 	tmo /= (1000000L);
 
 	tmp  = get_timer_masked();	/* get current timestamp */
@@ -244,7 +245,11 @@ ulong get_timer_masked (void)
 		total_count += lastdec - now;
 	}
 	lastdec	  = now;
-	timestamp = (ulong)(total_count/div_timer);
+
+	/* Reuse "now" */
+	now = total_count;
+	do_div(now, div_timer);
+	timestamp = now;
 
 	return timestamp;
 }
@@ -270,5 +275,5 @@ unsigned long long get_ticks(void)
  */
 ulong get_tbclk (void)
 {
-	return (ulong)(((unsigned long long)CFG_HZ_CLOCK)/div_clock);
+	return (ulong)(((unsigned long long)CONFIG_SYS_HZ_CLOCK)/div_clock);
 }
diff --git a/board/ip860/flash.c b/board/ip860/flash.c
index 2cf23b3e8..6491af2ff 100644
--- a/board/ip860/flash.c
+++ b/board/ip860/flash.c
@@ -24,17 +24,17 @@
 #include <common.h>
 #include <mpc8xx.h>
 
-flash_info_t	flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips	*/
+flash_info_t	flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips	*/
 
-#if defined(CFG_ENV_IS_IN_FLASH)
-# ifndef  CFG_ENV_ADDR
-#  define CFG_ENV_ADDR	(CFG_FLASH_BASE + CFG_ENV_OFFSET)
+#if defined(CONFIG_ENV_IS_IN_FLASH)
+# ifndef  CONFIG_ENV_ADDR
+#  define CONFIG_ENV_ADDR	(CONFIG_SYS_FLASH_BASE + CONFIG_ENV_OFFSET)
 # endif
-# ifndef  CFG_ENV_SIZE
-#  define CFG_ENV_SIZE	CFG_ENV_SECT_SIZE
+# ifndef  CONFIG_ENV_SIZE
+#  define CONFIG_ENV_SIZE	CONFIG_ENV_SECT_SIZE
 # endif
-# ifndef  CFG_ENV_SECT_SIZE
-#  define CFG_ENV_SECT_SIZE  CFG_ENV_SIZE
+# ifndef  CONFIG_ENV_SECT_SIZE
+#  define CONFIG_ENV_SECT_SIZE  CONFIG_ENV_SIZE
 # endif
 #endif
 
@@ -50,7 +50,7 @@ static void flash_get_offsets (ulong base, flash_info_t *info);
 
 unsigned long flash_init (void)
 {
-	volatile immap_t	*immap  = (immap_t *)CFG_IMMR;
+	volatile immap_t	*immap  = (immap_t *)CONFIG_SYS_IMMR;
 	volatile memctl8xx_t	*memctl = &immap->im_memctl;
 	volatile ip860_bcsr_t	*bcsr   = (ip860_bcsr_t *)BCSR_BASE;
 	unsigned long size;
@@ -61,7 +61,7 @@ unsigned long flash_init (void)
 	 */
 	bcsr->bd_ctrl |= BD_CTRL_FLWE;
 
-	for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) {
+	for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
 		flash_info[i].flash_id = FLASH_UNKNOWN;
 	}
 
@@ -75,30 +75,30 @@ unsigned long flash_init (void)
 	}
 
 	/* Remap FLASH according to real size */
-	memctl->memc_or1 = CFG_OR_TIMING_FLASH | (-size & 0xFFFF8000);
-	memctl->memc_br1 = (CFG_FLASH_BASE & BR_BA_MSK) |
+	memctl->memc_or1 = CONFIG_SYS_OR_TIMING_FLASH | (-size & 0xFFFF8000);
+	memctl->memc_br1 = (CONFIG_SYS_FLASH_BASE & BR_BA_MSK) |
 				(memctl->memc_br1 & ~(BR_BA_MSK));
 
 	/* Re-do sizing to get full correct info */
-	size = flash_get_size((vu_long *)CFG_FLASH_BASE, &flash_info[0]);
+	size = flash_get_size((vu_long *)CONFIG_SYS_FLASH_BASE, &flash_info[0]);
 
-	flash_get_offsets (CFG_FLASH_BASE, &flash_info[0]);
+	flash_get_offsets (CONFIG_SYS_FLASH_BASE, &flash_info[0]);
 
 	flash_info[0].size = size;
 
-#if CFG_MONITOR_BASE >= CFG_FLASH_BASE
+#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE
 	/* monitor protection ON by default */
 	flash_protect(FLAG_PROTECT_SET,
-		      CFG_MONITOR_BASE,
-		      CFG_MONITOR_BASE+monitor_flash_len-1,
+		      CONFIG_SYS_MONITOR_BASE,
+		      CONFIG_SYS_MONITOR_BASE+monitor_flash_len-1,
 		      &flash_info[0]);
 #endif
 
-#ifdef	CFG_ENV_IS_IN_FLASH
+#ifdef	CONFIG_ENV_IS_IN_FLASH
 	/* ENV protection ON by default */
 	flash_protect(FLAG_PROTECT_SET,
-		      CFG_ENV_ADDR,
-		      CFG_ENV_ADDR+CFG_ENV_SECT_SIZE-1,
+		      CONFIG_ENV_ADDR,
+		      CONFIG_ENV_ADDR+CONFIG_ENV_SECT_SIZE-1,
 		      &flash_info[0]);
 #endif
 	return (size);
@@ -309,7 +309,7 @@ int	flash_erase (flash_info_t *info, int s_first, int s_last)
 			udelay (1000);
 
 			while ((*addr & 0x00800080) != 0x00800080) {
-				if ((now=get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+				if ((now=get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
 					printf ("Timeout\n");
 					*addr = 0xFFFFFFFF;	/* reset bank */
 					return 1;
@@ -434,7 +434,7 @@ static int write_word (flash_info_t *info, ulong dest, ulong data)
 	start = get_timer (0);
 	flag  = 0;
 	while (((csr = *addr) & 0x00800080) != 0x00800080) {
-		if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+		if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
 			flag = 1;
 			break;
 		}
diff --git a/board/ip860/ip860.c b/board/ip860/ip860.c
index 375cd4d26..e2a185146 100644
--- a/board/ip860/ip860.c
+++ b/board/ip860/ip860.c
@@ -87,12 +87,12 @@ const uint sdram_table[] = {
 /* ------------------------------------------------------------------------- */
 int board_early_init_f(void)
 {
-    volatile immap_t     *immap  = (immap_t *)CFG_IMMR;
+    volatile immap_t     *immap  = (immap_t *)CONFIG_SYS_IMMR;
     volatile memctl8xx_t *memctl = &immap->im_memctl;
 
 /* init BCSR chipselect line for ip860_get_clk_freq() and ip860_get_dram_size() */
-    memctl->memc_or4 = CFG_OR4;
-    memctl->memc_br4 = CFG_BR4;
+    memctl->memc_or4 = CONFIG_SYS_OR4;
+    memctl->memc_br4 = CONFIG_SYS_BR4;
 
     return 0;
 }
@@ -139,7 +139,7 @@ int checkboard (void)
 
 phys_size_t initdram (int board_type)
 {
-	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
 	volatile memctl8xx_t *memctl = &immap->im_memctl;
 	long int size;
 	ulong refresh_val;
@@ -167,8 +167,8 @@ phys_size_t initdram (int board_type)
 	/*
 	 * Map controller banks 2 to the SDRAM address
 	 */
-	memctl->memc_or2 = CFG_OR2;
-	memctl->memc_br2 = CFG_BR2;
+	memctl->memc_or2 = CONFIG_SYS_OR2;
+	memctl->memc_br2 = CONFIG_SYS_BR2;
 
 	/* IP860 boards have only one bank SDRAM */
 
@@ -197,7 +197,7 @@ phys_size_t initdram (int board_type)
 	udelay (1000);
 
 	memctl->memc_or2 = ((-size) & 0xFFFF0000) | SDRAM_TIMING;
-	memctl->memc_br2 = (CFG_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V;
+	memctl->memc_br2 = (CONFIG_SYS_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V;
 
 	udelay (10000);
 
@@ -205,34 +205,34 @@ phys_size_t initdram (int board_type)
 	 * Also, map other memory to correct position
 	 */
 
-#if (defined(CFG_OR1) && defined(CFG_BR1_PRELIM))
-	memctl->memc_or1 = CFG_OR1;
-	memctl->memc_br1 = CFG_BR1;
+#if (defined(CONFIG_SYS_OR1) && defined(CONFIG_SYS_BR1_PRELIM))
+	memctl->memc_or1 = CONFIG_SYS_OR1;
+	memctl->memc_br1 = CONFIG_SYS_BR1;
 #endif
 
-#if defined(CFG_OR3) && defined(CFG_BR3)
-	memctl->memc_or3 = CFG_OR3;
-	memctl->memc_br3 = CFG_BR3;
+#if defined(CONFIG_SYS_OR3) && defined(CONFIG_SYS_BR3)
+	memctl->memc_or3 = CONFIG_SYS_OR3;
+	memctl->memc_br3 = CONFIG_SYS_BR3;
 #endif
 
-#if defined(CFG_OR4) && defined(CFG_BR4)
-	memctl->memc_or4 = CFG_OR4;
-	memctl->memc_br4 = CFG_BR4;
+#if defined(CONFIG_SYS_OR4) && defined(CONFIG_SYS_BR4)
+	memctl->memc_or4 = CONFIG_SYS_OR4;
+	memctl->memc_br4 = CONFIG_SYS_BR4;
 #endif
 
-#if defined(CFG_OR5) && defined(CFG_BR5)
-	memctl->memc_or5 = CFG_OR5;
-	memctl->memc_br5 = CFG_BR5;
+#if defined(CONFIG_SYS_OR5) && defined(CONFIG_SYS_BR5)
+	memctl->memc_or5 = CONFIG_SYS_OR5;
+	memctl->memc_br5 = CONFIG_SYS_BR5;
 #endif
 
-#if defined(CFG_OR6) && defined(CFG_BR6)
-	memctl->memc_or6 = CFG_OR6;
-	memctl->memc_br6 = CFG_BR6;
+#if defined(CONFIG_SYS_OR6) && defined(CONFIG_SYS_BR6)
+	memctl->memc_or6 = CONFIG_SYS_OR6;
+	memctl->memc_br6 = CONFIG_SYS_BR6;
 #endif
 
-#if defined(CFG_OR7) && defined(CFG_BR7)
-	memctl->memc_or7 = CFG_OR7;
-	memctl->memc_br7 = CFG_BR7;
+#if defined(CONFIG_SYS_OR7) && defined(CONFIG_SYS_BR7)
+	memctl->memc_or7 = CONFIG_SYS_OR7;
+	memctl->memc_br7 = CONFIG_SYS_BR7;
 #endif
 
 	return (size);
@@ -251,7 +251,7 @@ phys_size_t initdram (int board_type)
 static long int dram_size (long int mamr_value, long int *base,
 						   long int maxsize)
 {
-	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
 	volatile memctl8xx_t *memctl = &immap->im_memctl;
 
 	memctl->memc_mamr = mamr_value;
@@ -263,7 +263,7 @@ static long int dram_size (long int mamr_value, long int *base,
 
 void reset_phy (void)
 {
-	volatile immap_t *immr = (immap_t *) CFG_IMMR;
+	volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
 	ulong mask = PB_ENET_RESET | PB_ENET_JABD;
 	ulong reg;
 
diff --git a/board/ip860/u-boot.lds b/board/ip860/u-boot.lds
index ef8829793..d1cb7e262 100644
--- a/board/ip860/u-boot.lds
+++ b/board/ip860/u-boot.lds
@@ -63,7 +63,7 @@ SECTIONS
     lib_ppc/ticks.o		(.text)
 /**
     . = env_offset;
-    common/environment.o(.text)
+    common/env_embedded.o(.text)
 **/
     *(.text)
     *(.fixup)
@@ -134,6 +134,7 @@ SECTIONS
    *(.dynbss)
    *(.bss)
    *(COMMON)
+   . = ALIGN(4);
   }
   _end = . ;
   PROVIDE (end = .);
diff --git a/board/ip860/u-boot.lds.debug b/board/ip860/u-boot.lds.debug
index ad685e6f8..e8a47f7a0 100644
--- a/board/ip860/u-boot.lds.debug
+++ b/board/ip860/u-boot.lds.debug
@@ -62,7 +62,7 @@ SECTIONS
     lib_ppc/ticks.o		(.text)
 /**
     . = env_offset;
-    common/environment.o(.text)
+    common/env_embedded.o(.text)
 **/
     *(.text)
     *(.fixup)
diff --git a/board/iphase4539/flash.c b/board/iphase4539/flash.c
index 4eca46720..3dfee1fde 100644
--- a/board/iphase4539/flash.c
+++ b/board/iphase4539/flash.c
@@ -31,7 +31,7 @@
 #include <flash.h>
 #include <asm/io.h>
 
-flash_info_t	flash_info[CFG_MAX_FLASH_BANKS];
+flash_info_t	flash_info[CONFIG_SYS_MAX_FLASH_BANKS];
 
 extern int hwc_flash_size(void);
 static ulong flash_get_size (u32 addr, flash_info_t *info);
@@ -52,41 +52,41 @@ unsigned long flash_init (void)
 	unsigned int bank = 0;
 
 	/* Init: no FLASHes known */
-	for (i=0; i < CFG_MAX_FLASH_BANKS; ++i) {
+	for (i=0; i < CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
 		flash_info[i].flash_id = FLASH_UNKNOWN;
 		flash_info[i].sector_count = 0;
 		flash_info[i].size = 0;
 	}
 
 	/* Initialise the BOOT Flash */
-	if (bank == CFG_MAX_FLASH_BANKS) {
+	if (bank == CONFIG_SYS_MAX_FLASH_BANKS) {
 		puts ("Warning: not all Flashes are initialised !");
 		return flash_size;
 	}
 
-	bank_size = flash_get_size (CFG_FLASH_BASE, flash_info + bank);
+	bank_size = flash_get_size (CONFIG_SYS_FLASH_BASE, flash_info + bank);
 	if (bank_size) {
-#if CFG_MONITOR_BASE >= CFG_FLASH_BASE && \
-    CFG_MONITOR_BASE < CFG_FLASH_BASE + CFG_MAX_FLASH_SIZE
+#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE && \
+    CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE + CONFIG_SYS_MAX_FLASH_SIZE
 		/* monitor protection ON by default */
 		flash_protect(FLAG_PROTECT_SET,
-			      CFG_MONITOR_BASE,
-			      CFG_MONITOR_BASE + monitor_flash_len - 1,
+			      CONFIG_SYS_MONITOR_BASE,
+			      CONFIG_SYS_MONITOR_BASE + monitor_flash_len - 1,
 			      flash_info + bank);
 #endif
 
-#ifdef CFG_ENV_IS_IN_FLASH
+#ifdef CONFIG_ENV_IS_IN_FLASH
 		/* ENV protection ON by default */
 		flash_protect(FLAG_PROTECT_SET,
-			      CFG_ENV_ADDR,
-			      CFG_ENV_ADDR + CFG_ENV_SECT_SIZE - 1,
+			      CONFIG_ENV_ADDR,
+			      CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE - 1,
 			      flash_info + bank);
 #endif
 
 		/* HWC protection ON by default */
 		flash_protect(FLAG_PROTECT_SET,
-			      CFG_FLASH_BASE,
-			      CFG_FLASH_BASE + 0x10000 - 1,
+			      CONFIG_SYS_FLASH_BASE,
+			      CONFIG_SYS_FLASH_BASE + 0x10000 - 1,
 			      flash_info + bank);
 
 		flash_size += bank_size;
@@ -144,10 +144,10 @@ static ulong flash_get_size (u32 addr, flash_info_t *info)
 	case AMD_ID_LV033C:
 		info->flash_id += FLASH_AM033C;
 		info->size = hwc_flash_size();
-		if (info->size > CFG_MAX_FLASH_SIZE) {
+		if (info->size > CONFIG_SYS_MAX_FLASH_SIZE) {
 			printf("U-Boot supports only %d MB\n",
-			       CFG_MAX_FLASH_SIZE);
-			info->size = CFG_MAX_FLASH_SIZE;
+			       CONFIG_SYS_MAX_FLASH_SIZE);
+			info->size = CONFIG_SYS_MAX_FLASH_SIZE;
 		}
 		info->sector_count = info->size / 0x10000;
 		break;				/* => 4 MB		*/
@@ -281,7 +281,7 @@ int flash_erase (flash_info_t *info, int s_first, int s_last)
 	last  = start;
 	addr = info->start[l_sect];
 	while ((in8(addr) & 0x80) != 0x80) {
-		if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+		if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
 			printf ("Timeout\n");
 			return 1;
 		}
@@ -421,7 +421,7 @@ static int write_word (flash_info_t *info, ulong dest, ulong data)
 	/* data polling for D7 */
 	start = get_timer (0);
 	while ((in32(dest) & 0x80808080) != (data & 0x80808080)) {
-		if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+		if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
 			return (1);
 		}
 		iobarrier_rw();
diff --git a/board/iphase4539/iphase4539.c b/board/iphase4539/iphase4539.c
index e5d0254a1..7fec2cc79 100644
--- a/board/iphase4539/iphase4539.c
+++ b/board/iphase4539/iphase4539.c
@@ -195,16 +195,16 @@ const iop_conf_t iop_conf_tab[4][32] = {
 
 phys_size_t initdram (int board_type)
 {
-	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
 	volatile memctl8260_t *memctl = &immap->im_memctl;
 	volatile uchar *base;
 	ulong maxsize;
 	int i;
 
-	memctl->memc_psrt = CFG_PSRT;
-	memctl->memc_mptpr = CFG_MPTPR;
+	memctl->memc_psrt = CONFIG_SYS_PSRT;
+	memctl->memc_mptpr = CONFIG_SYS_MPTPR;
 
-#ifndef CFG_RAMBOOT
+#ifndef CONFIG_SYS_RAMBOOT
 	immap->im_siu_conf.sc_ppc_acr = 0x00000026;
 	immap->im_siu_conf.sc_ppc_alrh = 0x01276345;
 	immap->im_siu_conf.sc_ppc_alrl = 0x89ABCDEF;
@@ -217,7 +217,7 @@ phys_size_t initdram (int board_type)
 	/* Init Main SDRAM */
 #define OP_VALUE   0x404A241A
 #define OP_VALUE_M (OP_VALUE & 0x87FFFFFF);
-	base = (uchar *) CFG_SDRAM_BASE;
+	base = (uchar *) CONFIG_SYS_SDRAM_BASE;
 	memctl->memc_psdmr = 0x28000000 | OP_VALUE_M;
 	*base = 0xFF;
 	memctl->memc_psdmr = 0x08000000 | OP_VALUE_M;
diff --git a/board/ispan/ispan.c b/board/ispan/ispan.c
index 12fb91fb8..9254e0a64 100644
--- a/board/ispan/ispan.c
+++ b/board/ispan/ispan.c
@@ -39,31 +39,31 @@
  * according to the five values podr/pdir/ppar/psor/pdat for that entry
  */
 
-#define CFG_FCC1 (CONFIG_ETHER_INDEX == 1)
-#define CFG_FCC2 (CONFIG_ETHER_INDEX == 2)
-#define CFG_FCC3 (CONFIG_ETHER_INDEX == 3)
+#define CONFIG_SYS_FCC1 (CONFIG_ETHER_INDEX == 1)
+#define CONFIG_SYS_FCC2 (CONFIG_ETHER_INDEX == 2)
+#define CONFIG_SYS_FCC3 (CONFIG_ETHER_INDEX == 3)
 
 const iop_conf_t iop_conf_tab[4][32] = {
     /* Port A */
     {	/*	      conf      ppar psor pdir podr pdat */
-	/* PA31 */ { CFG_FCC1,   1,   1,   0,   0,   0 }, /* FCC1 MII COL   */
-	/* PA30 */ { CFG_FCC1,   1,   1,   0,   0,   0 }, /* FCC1 MII CRS   */
-	/* PA29 */ { CFG_FCC1,   1,   1,   1,   0,   0 }, /* FCC1 MII TX_ER */
-	/* PA28 */ { CFG_FCC1,   1,   1,   1,   0,   0 }, /* FCC1 MII TX_EN */
-	/* PA27 */ { CFG_FCC1,   1,   1,   0,   0,   0 }, /* FCC1 MII RX_DV */
-	/* PA26 */ { CFG_FCC1,   1,   1,   0,   0,   0 }, /* FCC1 MII RX_ER */
+	/* PA31 */ { CONFIG_SYS_FCC1,   1,   1,   0,   0,   0 }, /* FCC1 MII COL   */
+	/* PA30 */ { CONFIG_SYS_FCC1,   1,   1,   0,   0,   0 }, /* FCC1 MII CRS   */
+	/* PA29 */ { CONFIG_SYS_FCC1,   1,   1,   1,   0,   0 }, /* FCC1 MII TX_ER */
+	/* PA28 */ { CONFIG_SYS_FCC1,   1,   1,   1,   0,   0 }, /* FCC1 MII TX_EN */
+	/* PA27 */ { CONFIG_SYS_FCC1,   1,   1,   0,   0,   0 }, /* FCC1 MII RX_DV */
+	/* PA26 */ { CONFIG_SYS_FCC1,   1,   1,   0,   0,   0 }, /* FCC1 MII RX_ER */
 	/* PA25 */ { 0,          0,   0,   0,   0,   0 }, /* PA25 */
 	/* PA24 */ { 0,          0,   0,   0,   0,   0 }, /* PA24 */
 	/* PA23 */ { 0,          0,   0,   0,   0,   0 }, /* PA23 */
 	/* PA22 */ { 0,          0,   0,   0,   0,   0 }, /* PA22 */
-	/* PA21 */ { CFG_FCC1,   1,   0,   1,   0,   0 }, /* FCC1 MII TxD[3] */
-	/* PA20 */ { CFG_FCC1,   1,   0,   1,   0,   0 }, /* FCC1 MII TxD[2] */
-	/* PA19 */ { CFG_FCC1,   1,   0,   1,   0,   0 }, /* FCC1 MII TxD[1] */
-	/* PA18 */ { CFG_FCC1,   1,   0,   1,   0,   0 }, /* FCC1 MII TxD[0] */
-	/* PA17 */ { CFG_FCC1,   1,   0,   0,   0,   0 }, /* FCC1 MII RxD[0] */
-	/* PA16 */ { CFG_FCC1,   1,   0,   0,   0,   0 }, /* FCC1 MII RxD[1] */
-	/* PA15 */ { CFG_FCC1,   1,   0,   0,   0,   0 }, /* FCC1 MII RxD[2] */
-	/* PA14 */ { CFG_FCC1,   1,   0,   0,   0,   0 }, /* FCC1 MII RxD[3] */
+	/* PA21 */ { CONFIG_SYS_FCC1,   1,   0,   1,   0,   0 }, /* FCC1 MII TxD[3] */
+	/* PA20 */ { CONFIG_SYS_FCC1,   1,   0,   1,   0,   0 }, /* FCC1 MII TxD[2] */
+	/* PA19 */ { CONFIG_SYS_FCC1,   1,   0,   1,   0,   0 }, /* FCC1 MII TxD[1] */
+	/* PA18 */ { CONFIG_SYS_FCC1,   1,   0,   1,   0,   0 }, /* FCC1 MII TxD[0] */
+	/* PA17 */ { CONFIG_SYS_FCC1,   1,   0,   0,   0,   0 }, /* FCC1 MII RxD[0] */
+	/* PA16 */ { CONFIG_SYS_FCC1,   1,   0,   0,   0,   0 }, /* FCC1 MII RxD[1] */
+	/* PA15 */ { CONFIG_SYS_FCC1,   1,   0,   0,   0,   0 }, /* FCC1 MII RxD[2] */
+	/* PA14 */ { CONFIG_SYS_FCC1,   1,   0,   0,   0,   0 }, /* FCC1 MII RxD[3] */
 	/* PA13 */ { 0,          0,   0,   0,   0,   0 }, /* PA13 */
 	/* PA12 */ { 0,          0,   0,   0,   0,   0 }, /* PA12 */
 	/* PA11 */ { 0,          0,   0,   0,   0,   0 }, /* PA11 */
@@ -82,34 +82,34 @@ const iop_conf_t iop_conf_tab[4][32] = {
 
     /* Port B */
     {   /*	      conf      ppar psor pdir podr pdat */
-	/* PB31 */ { CFG_FCC2,   1,   0,   1,   0,   0 }, /* FCC2 MII TX_ER  */
-	/* PB30 */ { CFG_FCC2,   1,   0,   0,   0,   0 }, /* FCC2 MII RX_DV  */
-	/* PB29 */ { CFG_FCC2,   1,   1,   1,   0,   0 }, /* FCC2 MII TX_EN  */
-	/* PB28 */ { CFG_FCC2,   1,   0,   0,   0,   0 }, /* FCC2 MII RX_ER  */
-	/* PB27 */ { CFG_FCC2,   1,   0,   0,   0,   0 }, /* FCC2 MII COL    */
-	/* PB26 */ { CFG_FCC2,   1,   0,   0,   0,   0 }, /* FCC2 MII CRS    */
-	/* PB25 */ { CFG_FCC2,   1,   0,   1,   0,   0 }, /* FCC2 MII TxD[3] */
-	/* PB24 */ { CFG_FCC2,   1,   0,   1,   0,   0 }, /* FCC2 MII TxD[2] */
-	/* PB23 */ { CFG_FCC2,   1,   0,   1,   0,   0 }, /* FCC2 MII TxD[1] */
-	/* PB22 */ { CFG_FCC2,   1,   0,   1,   0,   0 }, /* FCC2 MII TxD[0] */
-	/* PB21 */ { CFG_FCC2,   1,   0,   0,   0,   0 }, /* FCC2 MII RxD[0] */
-	/* PB20 */ { CFG_FCC2,   1,   0,   0,   0,   0 }, /* FCC2 MII RxD[1] */
-	/* PB19 */ { CFG_FCC2,   1,   0,   0,   0,   0 }, /* FCC2 MII RxD[2] */
-	/* PB18 */ { CFG_FCC2,   1,   0,   0,   0,   0 }, /* FCC2 MII RxD[3] */
-	/* PB17 */ { CFG_FCC3,   1,   0,   0,   0,   0 }, /* FCC3 MII RX_DV  */
-	/* PB16 */ { CFG_FCC3,   1,   0,   0,   0,   0 }, /* FCC3 MII RX_ER  */
-	/* PB15 */ { CFG_FCC3,   1,   0,   1,   0,   0 }, /* FCC3 MII TX_ER  */
-	/* PB14 */ { CFG_FCC3,   1,   0,   1,   0,   0 }, /* FCC3 MII TX_EN  */
-	/* PB13 */ { CFG_FCC3,   1,   0,   0,   0,   0 }, /* FCC3 MII COL    */
-	/* PB12 */ { CFG_FCC3,   1,   0,   0,   0,   0 }, /* FCC3 MII CRS    */
-	/* PB11 */ { CFG_FCC3,   1,   0,   0,   0,   0 }, /* FCC3 MII RxD[3] */
-	/* PB10 */ { CFG_FCC3,   1,   0,   0,   0,   0 }, /* FCC3 MII RxD[2] */
-	/* PB9  */ { CFG_FCC3,   1,   0,   0,   0,   0 }, /* FCC3 MII RxD[1] */
-	/* PB8  */ { CFG_FCC3,   1,   0,   0,   0,   0 }, /* FCC3 MII RxD[0] */
-	/* PB7  */ { CFG_FCC3,   1,   0,   1,   0,   0 }, /* FCC3 MII TxD[0] */
-	/* PB6  */ { CFG_FCC3,   1,   0,   1,   0,   0 }, /* FCC3 MII TxD[1] */
-	/* PB5  */ { CFG_FCC3,   1,   0,   1,   0,   0 }, /* FCC3 MII TxD[2] */
-	/* PB4  */ { CFG_FCC3,   1,   0,   1,   0,   0 }, /* FCC3 MII TxD[3] */
+	/* PB31 */ { CONFIG_SYS_FCC2,   1,   0,   1,   0,   0 }, /* FCC2 MII TX_ER  */
+	/* PB30 */ { CONFIG_SYS_FCC2,   1,   0,   0,   0,   0 }, /* FCC2 MII RX_DV  */
+	/* PB29 */ { CONFIG_SYS_FCC2,   1,   1,   1,   0,   0 }, /* FCC2 MII TX_EN  */
+	/* PB28 */ { CONFIG_SYS_FCC2,   1,   0,   0,   0,   0 }, /* FCC2 MII RX_ER  */
+	/* PB27 */ { CONFIG_SYS_FCC2,   1,   0,   0,   0,   0 }, /* FCC2 MII COL    */
+	/* PB26 */ { CONFIG_SYS_FCC2,   1,   0,   0,   0,   0 }, /* FCC2 MII CRS    */
+	/* PB25 */ { CONFIG_SYS_FCC2,   1,   0,   1,   0,   0 }, /* FCC2 MII TxD[3] */
+	/* PB24 */ { CONFIG_SYS_FCC2,   1,   0,   1,   0,   0 }, /* FCC2 MII TxD[2] */
+	/* PB23 */ { CONFIG_SYS_FCC2,   1,   0,   1,   0,   0 }, /* FCC2 MII TxD[1] */
+	/* PB22 */ { CONFIG_SYS_FCC2,   1,   0,   1,   0,   0 }, /* FCC2 MII TxD[0] */
+	/* PB21 */ { CONFIG_SYS_FCC2,   1,   0,   0,   0,   0 }, /* FCC2 MII RxD[0] */
+	/* PB20 */ { CONFIG_SYS_FCC2,   1,   0,   0,   0,   0 }, /* FCC2 MII RxD[1] */
+	/* PB19 */ { CONFIG_SYS_FCC2,   1,   0,   0,   0,   0 }, /* FCC2 MII RxD[2] */
+	/* PB18 */ { CONFIG_SYS_FCC2,   1,   0,   0,   0,   0 }, /* FCC2 MII RxD[3] */
+	/* PB17 */ { CONFIG_SYS_FCC3,   1,   0,   0,   0,   0 }, /* FCC3 MII RX_DV  */
+	/* PB16 */ { CONFIG_SYS_FCC3,   1,   0,   0,   0,   0 }, /* FCC3 MII RX_ER  */
+	/* PB15 */ { CONFIG_SYS_FCC3,   1,   0,   1,   0,   0 }, /* FCC3 MII TX_ER  */
+	/* PB14 */ { CONFIG_SYS_FCC3,   1,   0,   1,   0,   0 }, /* FCC3 MII TX_EN  */
+	/* PB13 */ { CONFIG_SYS_FCC3,   1,   0,   0,   0,   0 }, /* FCC3 MII COL    */
+	/* PB12 */ { CONFIG_SYS_FCC3,   1,   0,   0,   0,   0 }, /* FCC3 MII CRS    */
+	/* PB11 */ { CONFIG_SYS_FCC3,   1,   0,   0,   0,   0 }, /* FCC3 MII RxD[3] */
+	/* PB10 */ { CONFIG_SYS_FCC3,   1,   0,   0,   0,   0 }, /* FCC3 MII RxD[2] */
+	/* PB9  */ { CONFIG_SYS_FCC3,   1,   0,   0,   0,   0 }, /* FCC3 MII RxD[1] */
+	/* PB8  */ { CONFIG_SYS_FCC3,   1,   0,   0,   0,   0 }, /* FCC3 MII RxD[0] */
+	/* PB7  */ { CONFIG_SYS_FCC3,   1,   0,   1,   0,   0 }, /* FCC3 MII TxD[0] */
+	/* PB6  */ { CONFIG_SYS_FCC3,   1,   0,   1,   0,   0 }, /* FCC3 MII TxD[1] */
+	/* PB5  */ { CONFIG_SYS_FCC3,   1,   0,   1,   0,   0 }, /* FCC3 MII TxD[2] */
+	/* PB4  */ { CONFIG_SYS_FCC3,   1,   0,   1,   0,   0 }, /* FCC3 MII TxD[3] */
 	/* PB3  */ { 0,          0,   0,   0,   0,   0 }, /* pin doesn't exist */
 	/* PB2  */ { 0,          0,   0,   0,   0,   0 }, /* pin doesn't exist */
 	/* PB1  */ { 0,          0,   0,   0,   0,   0 }, /* pin doesn't exist */
@@ -131,9 +131,9 @@ const iop_conf_t iop_conf_tab[4][32] = {
 	/* PC21 */ { 0,          0,   0,   0,   0,   0 }, /* PC21 */
 	/* PC20 */ { 0,          0,   0,   0,   0,   0 }, /* PC20 */
 	/* PC19 */ { 0,          0,   0,   0,   0,   0 }, /* PC19 */
-	/* PC18 */ { CFG_FCC3,   1,   0,   0,   0,   0 }, /* FCC3 MII Rx Clock (CLK14) */
+	/* PC18 */ { CONFIG_SYS_FCC3,   1,   0,   0,   0,   0 }, /* FCC3 MII Rx Clock (CLK14) */
 	/* PC17 */ { 0,          0,   0,   0,   0,   0 }, /* PC17 */
-	/* PC16 */ { CFG_FCC3,   1,   0,   0,   0,   0 }, /* FCC3 MII Tx Clock (CLK16) */
+	/* PC16 */ { CONFIG_SYS_FCC3,   1,   0,   0,   0,   0 }, /* FCC3 MII Tx Clock (CLK16) */
 	/* PC15 */ { 0,          0,   0,   0,   0,   0 }, /* PC15 */
 	/* PC14 */ { 0,          0,   0,   0,   0,   0 }, /* PC14 */
 	/* PC13 */ { 0,          0,   0,   0,   0,   0 }, /* PC13 */
@@ -179,8 +179,8 @@ const iop_conf_t iop_conf_tab[4][32] = {
 	/* PD9  */ { 1,          1,   0,   1,   0,   0 }, /* SMC1 SMTXD */
 	/* PD8  */ { 1,          1,   0,   0,   0,   0 }, /* SMC1 SMRXD */
 	/* PD7  */ { 0,          0,   0,   0,   0,   0 }, /* PD7 */
-	/* PD6  */ { CFG_FCC3,   0,   0,   1,   0,   1 }, /* MII PHY Reset  */
-	/* PD5  */ { CFG_FCC3,   0,   0,   1,   0,   0 }, /* MII PHY Enable */
+	/* PD6  */ { CONFIG_SYS_FCC3,   0,   0,   1,   0,   1 }, /* MII PHY Reset  */
+	/* PD5  */ { CONFIG_SYS_FCC3,   0,   0,   1,   0,   0 }, /* MII PHY Enable */
 	/* PD4  */ { 0,          0,   0,   0,   0,   0 }, /* PD4 */
 	/* PD3  */ { 0,          0,   0,   0,   0,   0 }, /* pin doesn't exist */
 	/* PD2  */ { 0,          0,   0,   0,   0,   0 }, /* pin doesn't exist */
@@ -360,8 +360,8 @@ phys_size_t initdram (int board_type)
 {
 	long maxsize = hwc_main_sdram_size();
 
-#if !defined(CFG_RAMBOOT) && !defined(CFG_USE_FIRMWARE)
-	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+#if !defined(CONFIG_SYS_RAMBOOT) && !defined(CONFIG_SYS_USE_FIRMWARE)
+	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
 	volatile memctl8260_t *memctl = &immap->im_memctl;
 	volatile uchar *base;
 	int i;
@@ -375,37 +375,37 @@ phys_size_t initdram (int board_type)
 	immap->im_siu_conf.sc_tescr1   = 0x00004000;
 	immap->im_siu_conf.sc_ltescr1  = 0x00004000;
 
-	memctl->memc_mptpr = CFG_MPTPR;
+	memctl->memc_mptpr = CONFIG_SYS_MPTPR;
 
 	/* Initialise 60x bus SDRAM */
-	base = (uchar *)(CFG_SDRAM_BASE | 0x110);
-	memctl->memc_psrt  = CFG_PSRT;
-	memctl->memc_or1   = CFG_60x_OR;
-	memctl->memc_br1   = CFG_SDRAM_BASE | CFG_60x_BR;
+	base = (uchar *)(CONFIG_SYS_SDRAM_BASE | 0x110);
+	memctl->memc_psrt  = CONFIG_SYS_PSRT;
+	memctl->memc_or1   = CONFIG_SYS_60x_OR;
+	memctl->memc_br1   = CONFIG_SYS_SDRAM_BASE | CONFIG_SYS_60x_BR;
 
-	memctl->memc_psdmr = CFG_PSDMR | 0x28000000;
+	memctl->memc_psdmr = CONFIG_SYS_PSDMR | 0x28000000;
 	*base = 0xFF;
-	memctl->memc_psdmr = CFG_PSDMR | 0x08000000;
+	memctl->memc_psdmr = CONFIG_SYS_PSDMR | 0x08000000;
 	for (i = 0; i < 8; i++)
 		*base = 0xFF;
-	memctl->memc_psdmr = CFG_PSDMR | 0x18000000;
+	memctl->memc_psdmr = CONFIG_SYS_PSDMR | 0x18000000;
 	*base = 0xFF;
-	memctl->memc_psdmr = CFG_PSDMR | 0x40000000;
+	memctl->memc_psdmr = CONFIG_SYS_PSDMR | 0x40000000;
 
 	/* Initialise local bus SDRAM */
-	base = (uchar *)CFG_LSDRAM_BASE;
-	memctl->memc_lsrt  = CFG_LSRT;
-	memctl->memc_or2   = CFG_LOC_OR;
-	memctl->memc_br2   = CFG_LSDRAM_BASE | CFG_LOC_BR;
+	base = (uchar *)CONFIG_SYS_LSDRAM_BASE;
+	memctl->memc_lsrt  = CONFIG_SYS_LSRT;
+	memctl->memc_or2   = CONFIG_SYS_LOC_OR;
+	memctl->memc_br2   = CONFIG_SYS_LSDRAM_BASE | CONFIG_SYS_LOC_BR;
 
-	memctl->memc_lsdmr = CFG_LSDMR | 0x28000000;
+	memctl->memc_lsdmr = CONFIG_SYS_LSDMR | 0x28000000;
 	*base = 0xFF;
-	memctl->memc_lsdmr = CFG_LSDMR | 0x08000000;
+	memctl->memc_lsdmr = CONFIG_SYS_LSDMR | 0x08000000;
 	for (i = 0; i < 8; i++)
 		*base = 0xFF;
-	memctl->memc_lsdmr = CFG_LSDMR | 0x18000000;
+	memctl->memc_lsdmr = CONFIG_SYS_LSDMR | 0x18000000;
 	*base = 0xFF;
-	memctl->memc_lsdmr = CFG_LSDMR | 0x40000000;
+	memctl->memc_lsdmr = CONFIG_SYS_LSDMR | 0x40000000;
 
 	/* We must be able to test a location outsize the maximum legal size
 	 * to find out THAT we are outside; but this address still has to be
@@ -420,7 +420,7 @@ phys_size_t initdram (int board_type)
 
 	if (maxsize != hwc_main_sdram_size())
 		puts("Oops: memory test has not found all memory!\n");
-#endif /* !CFG_RAMBOOT && !CFG_USE_FIRMWARE */
+#endif /* !CONFIG_SYS_RAMBOOT && !CONFIG_SYS_USE_FIRMWARE */
 
 	/* Return total RAM size (size of 60x SDRAM) */
 	return maxsize;
diff --git a/board/ivm/flash.c b/board/ivm/flash.c
index 140ba2d53..cf309d77a 100644
--- a/board/ivm/flash.c
+++ b/board/ivm/flash.c
@@ -24,17 +24,17 @@
 #include <common.h>
 #include <mpc8xx.h>
 
-flash_info_t	flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips	*/
+flash_info_t	flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips	*/
 
-#if defined(CFG_ENV_IS_IN_FLASH)
-# ifndef  CFG_ENV_ADDR
-#  define CFG_ENV_ADDR	(CFG_FLASH_BASE + CFG_ENV_OFFSET)
+#if defined(CONFIG_ENV_IS_IN_FLASH)
+# ifndef  CONFIG_ENV_ADDR
+#  define CONFIG_ENV_ADDR	(CONFIG_SYS_FLASH_BASE + CONFIG_ENV_OFFSET)
 # endif
-# ifndef  CFG_ENV_SIZE
-#  define CFG_ENV_SIZE	CFG_ENV_SECT_SIZE
+# ifndef  CONFIG_ENV_SIZE
+#  define CONFIG_ENV_SIZE	CONFIG_ENV_SECT_SIZE
 # endif
-# ifndef  CFG_ENV_SECT_SIZE
-#  define CFG_ENV_SECT_SIZE  CFG_ENV_SIZE
+# ifndef  CONFIG_ENV_SECT_SIZE
+#  define CONFIG_ENV_SECT_SIZE  CONFIG_ENV_SIZE
 # endif
 #endif
 
@@ -50,13 +50,13 @@ static void flash_get_offsets (ulong base, flash_info_t *info);
 
 unsigned long flash_init (void)
 {
-	volatile immap_t     *immap  = (immap_t *)CFG_IMMR;
+	volatile immap_t     *immap  = (immap_t *)CONFIG_SYS_IMMR;
 	volatile memctl8xx_t *memctl = &immap->im_memctl;
 	unsigned long size_b0;
 	int i;
 
 	/* Init: no FLASHes known */
-	for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) {
+	for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
 		flash_info[i].flash_id = FLASH_UNKNOWN;
 	}
 
@@ -72,30 +72,30 @@ unsigned long flash_init (void)
 	}
 
 	/* Remap FLASH according to real size */
-	memctl->memc_or0 = CFG_OR_TIMING_FLASH | (-size_b0 & 0xFFFF8000);
-	memctl->memc_br0 = (CFG_FLASH_BASE & BR_BA_MSK) | \
+	memctl->memc_or0 = CONFIG_SYS_OR_TIMING_FLASH | (-size_b0 & 0xFFFF8000);
+	memctl->memc_br0 = (CONFIG_SYS_FLASH_BASE & BR_BA_MSK) | \
 				BR_MS_GPCM | BR_PS_16 | BR_V;
 
 	/* Re-do sizing to get full correct info */
-	size_b0 = flash_get_size((vu_long *)CFG_FLASH_BASE, &flash_info[0]);
+	size_b0 = flash_get_size((vu_long *)CONFIG_SYS_FLASH_BASE, &flash_info[0]);
 
-	flash_get_offsets (CFG_FLASH_BASE, &flash_info[0]);
+	flash_get_offsets (CONFIG_SYS_FLASH_BASE, &flash_info[0]);
 
 	flash_info[0].size = size_b0;
 
-#if CFG_MONITOR_BASE >= CFG_FLASH_BASE
+#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE
 	/* monitor protection ON by default */
 	flash_protect(FLAG_PROTECT_SET,
-		      CFG_MONITOR_BASE,
-		      CFG_MONITOR_BASE+monitor_flash_len-1,
+		      CONFIG_SYS_MONITOR_BASE,
+		      CONFIG_SYS_MONITOR_BASE+monitor_flash_len-1,
 		      &flash_info[0]);
 #endif
 
-#ifdef	CFG_ENV_IS_IN_FLASH
+#ifdef	CONFIG_ENV_IS_IN_FLASH
 	/* ENV protection ON by default */
 	flash_protect(FLAG_PROTECT_SET,
-		      CFG_ENV_ADDR,
-		      CFG_ENV_ADDR+CFG_ENV_SECT_SIZE-1,
+		      CONFIG_ENV_ADDR,
+		      CONFIG_ENV_ADDR+CONFIG_ENV_SECT_SIZE-1,
 		      &flash_info[0]);
 #endif
 
@@ -383,10 +383,10 @@ static ulong flash_get_size (vu_long *addr, flash_info_t *info)
 
 	}
 
-	if (info->sector_count > CFG_MAX_FLASH_SECT) {
+	if (info->sector_count > CONFIG_SYS_MAX_FLASH_SECT) {
 		printf ("** ERROR: sector count %d > max (%d) **\n",
-			info->sector_count, CFG_MAX_FLASH_SECT);
-		info->sector_count = CFG_MAX_FLASH_SECT;
+			info->sector_count, CONFIG_SYS_MAX_FLASH_SECT);
+		info->sector_count = CONFIG_SYS_MAX_FLASH_SECT;
 	}
 
 	saddr[0] = 0x00FF;		/* restore read mode */
@@ -454,7 +454,7 @@ int	flash_erase (flash_info_t *info, int s_first, int s_last)
 			udelay (1000);
 
 			while (((status = *addr) & 0x0080) != 0x0080) {
-				if ((now=get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+				if ((now=get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
 					printf ("Timeout\n");
 					*addr = 0x00FF;	/* reset to read mode */
 					return 1;
@@ -583,7 +583,7 @@ static int write_data (flash_info_t *info, ulong dest, ulong data)
 	start = get_timer (0);
 
 	while (((status = *addr) & 0x0080) != 0x0080) {
-		if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+		if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
 			*addr = 0x00FF;	/* restore read mode */
 			return (1);
 		}
diff --git a/board/ivm/ivm.c b/board/ivm/ivm.c
index 4882f0450..9bec198c2 100644
--- a/board/ivm/ivm.c
+++ b/board/ivm/ivm.c
@@ -161,28 +161,28 @@ int checkboard (void)
 
 phys_size_t initdram (int board_type)
 {
-	volatile immap_t *immr = (immap_t *) CFG_IMMR;
+	volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
 	volatile memctl8xx_t *memctl = &immr->im_memctl;
 	long int size_b0;
 
 	/* enable SDRAM clock ("switch on" SDRAM) */
-	immr->im_cpm.cp_pbpar &= ~(CFG_PB_SDRAM_CLKE);	/* GPIO */
-	immr->im_cpm.cp_pbodr &= ~(CFG_PB_SDRAM_CLKE);	/* active output */
-	immr->im_cpm.cp_pbdir |= CFG_PB_SDRAM_CLKE;	/* output */
-	immr->im_cpm.cp_pbdat |= CFG_PB_SDRAM_CLKE;	/* assert SDRAM CLKE */
+	immr->im_cpm.cp_pbpar &= ~(CONFIG_SYS_PB_SDRAM_CLKE);	/* GPIO */
+	immr->im_cpm.cp_pbodr &= ~(CONFIG_SYS_PB_SDRAM_CLKE);	/* active output */
+	immr->im_cpm.cp_pbdir |= CONFIG_SYS_PB_SDRAM_CLKE;	/* output */
+	immr->im_cpm.cp_pbdat |= CONFIG_SYS_PB_SDRAM_CLKE;	/* assert SDRAM CLKE */
 	udelay (1);
 
 	/*
 	 * Map controller bank 1 for ELIC SACCO
 	 */
-	memctl->memc_or1 = CFG_OR1;
-	memctl->memc_br1 = CFG_BR1;
+	memctl->memc_or1 = CONFIG_SYS_OR1;
+	memctl->memc_br1 = CONFIG_SYS_BR1;
 
 	/*
 	 * Map controller bank 2 for ELIC EPIC
 	 */
-	memctl->memc_or2 = CFG_OR2;
-	memctl->memc_br2 = CFG_BR2;
+	memctl->memc_or2 = CONFIG_SYS_OR2;
+	memctl->memc_br2 = CONFIG_SYS_BR2;
 
 	/*
 	 * Configure UPMA for SHARC
@@ -194,15 +194,15 @@ phys_size_t initdram (int board_type)
 	/*
 	 * Map controller bank 4 for HDLC Address space
 	 */
-	memctl->memc_or4 = CFG_OR4;
-	memctl->memc_br4 = CFG_BR4;
+	memctl->memc_or4 = CONFIG_SYS_OR4;
+	memctl->memc_br4 = CONFIG_SYS_BR4;
 #endif
 
 	/*
 	 * Map controller bank 5 for SHARC
 	 */
-	memctl->memc_or5 = CFG_OR5;
-	memctl->memc_br5 = CFG_BR5;
+	memctl->memc_or5 = CONFIG_SYS_OR5;
+	memctl->memc_br5 = CONFIG_SYS_BR5;
 
 	memctl->memc_mamr = 0x00001000;
 
@@ -212,17 +212,17 @@ phys_size_t initdram (int board_type)
 	upmconfig (UPMB, (uint *) sdram_table,
 		   sizeof (sdram_table) / sizeof (uint));
 
-	memctl->memc_mptpr = CFG_MPTPR_1BK_8K;
+	memctl->memc_mptpr = CONFIG_SYS_MPTPR_1BK_8K;
 
 	memctl->memc_mar = 0x00000088;
 
 	/*
 	 * Map controller bank 3 to the SDRAM bank at preliminary address.
 	 */
-	memctl->memc_or3 = CFG_OR3_PRELIM;
-	memctl->memc_br3 = CFG_BR3_PRELIM;
+	memctl->memc_or3 = CONFIG_SYS_OR3_PRELIM;
+	memctl->memc_br3 = CONFIG_SYS_BR3_PRELIM;
 
-	memctl->memc_mbmr = CFG_MBMR_8COL;	/* refresh not enabled yet */
+	memctl->memc_mbmr = CONFIG_SYS_MBMR_8COL;	/* refresh not enabled yet */
 
 	udelay (200);
 	memctl->memc_mcr = 0x80806105;	/* precharge */
@@ -251,10 +251,10 @@ phys_size_t initdram (int board_type)
 	 * Check Bank 0 Memory Size for re-configuration
 	 */
 	size_b0 =
-		dram_size (CFG_MBMR_8COL, (long *) SDRAM_BASE3_PRELIM,
+		dram_size (CONFIG_SYS_MBMR_8COL, (long *) SDRAM_BASE3_PRELIM,
 			   SDRAM_MAX_SIZE);
 
-	memctl->memc_mbmr = CFG_MBMR_8COL | MBMR_PTBE;
+	memctl->memc_mbmr = CONFIG_SYS_MBMR_8COL | MBMR_PTBE;
 
 	return (size_b0);
 }
@@ -272,7 +272,7 @@ phys_size_t initdram (int board_type)
 static long int dram_size (long int mamr_value, long int *base,
 			   long int maxsize)
 {
-	volatile immap_t *immr = (immap_t *) CFG_IMMR;
+	volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
 	volatile memctl8xx_t *memctl = &immr->im_memctl;
 
 	memctl->memc_mbmr = mamr_value;
@@ -284,13 +284,13 @@ static long int dram_size (long int mamr_value, long int *base,
 
 void reset_phy (void)
 {
-	immap_t *immr = (immap_t *) CFG_IMMR;
+	immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
 
 	/* De-assert Ethernet Powerdown */
-	immr->im_cpm.cp_pbpar &= ~(CFG_PB_ETH_POWERDOWN);	/* GPIO */
-	immr->im_cpm.cp_pbodr &= ~(CFG_PB_ETH_POWERDOWN);	/* active output */
-	immr->im_cpm.cp_pbdir |= CFG_PB_ETH_POWERDOWN;	/* output */
-	immr->im_cpm.cp_pbdat &= ~(CFG_PB_ETH_POWERDOWN);	/* Enable PHY power */
+	immr->im_cpm.cp_pbpar &= ~(CONFIG_SYS_PB_ETH_POWERDOWN);	/* GPIO */
+	immr->im_cpm.cp_pbodr &= ~(CONFIG_SYS_PB_ETH_POWERDOWN);	/* active output */
+	immr->im_cpm.cp_pbdir |= CONFIG_SYS_PB_ETH_POWERDOWN;	/* output */
+	immr->im_cpm.cp_pbdat &= ~(CONFIG_SYS_PB_ETH_POWERDOWN);	/* Enable PHY power */
 	udelay (1000);
 
 	/*
@@ -302,13 +302,13 @@ void reset_phy (void)
 	 * Note: The RESET pin is high active, but there is an
 	 *       inverter on the SPD823TS board...
 	 */
-	immr->im_ioport.iop_pcpar &= ~(CFG_PC_ETH_RESET);
-	immr->im_ioport.iop_pcdir |= CFG_PC_ETH_RESET;
+	immr->im_ioport.iop_pcpar &= ~(CONFIG_SYS_PC_ETH_RESET);
+	immr->im_ioport.iop_pcdir |= CONFIG_SYS_PC_ETH_RESET;
 	/* assert RESET signal of PHY */
-	immr->im_ioport.iop_pcdat &= ~(CFG_PC_ETH_RESET);
+	immr->im_ioport.iop_pcdat &= ~(CONFIG_SYS_PC_ETH_RESET);
 	udelay (10);
 	/* de-assert RESET signal of PHY */
-	immr->im_ioport.iop_pcdat |= CFG_PC_ETH_RESET;
+	immr->im_ioport.iop_pcdat |= CONFIG_SYS_PC_ETH_RESET;
 	udelay (10);
 }
 
@@ -332,21 +332,21 @@ void show_boot_progress (int status)
 
 void ide_set_reset (int on)
 {
-	volatile immap_t *immr = (immap_t *) CFG_IMMR;
+	volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
 
 	/*
 	 * Configure PC for IDE Reset Pin
 	 */
 	if (on) {		/* assert RESET */
-		immr->im_ioport.iop_pcdat &= ~(CFG_PC_IDE_RESET);
+		immr->im_ioport.iop_pcdat &= ~(CONFIG_SYS_PC_IDE_RESET);
 	} else {		/* release RESET */
-		immr->im_ioport.iop_pcdat |= CFG_PC_IDE_RESET;
+		immr->im_ioport.iop_pcdat |= CONFIG_SYS_PC_IDE_RESET;
 	}
 
 	/* program port pin as GPIO output */
-	immr->im_ioport.iop_pcpar &= ~(CFG_PC_IDE_RESET);
-	immr->im_ioport.iop_pcso &= ~(CFG_PC_IDE_RESET);
-	immr->im_ioport.iop_pcdir |= CFG_PC_IDE_RESET;
+	immr->im_ioport.iop_pcpar &= ~(CONFIG_SYS_PC_IDE_RESET);
+	immr->im_ioport.iop_pcso &= ~(CONFIG_SYS_PC_IDE_RESET);
+	immr->im_ioport.iop_pcdir |= CONFIG_SYS_PC_IDE_RESET;
 }
 
 /* ------------------------------------------------------------------------- */
diff --git a/board/ivm/u-boot.lds b/board/ivm/u-boot.lds
index d7f360f3b..2583a5996 100644
--- a/board/ivm/u-boot.lds
+++ b/board/ivm/u-boot.lds
@@ -53,7 +53,7 @@ SECTIONS
   .text      :
   {
     cpu/mpc8xx/start.o	(.text)
-    common/environment.o(.text)
+    common/env_embedded.o(.text)
     *(.text)
     *(.fixup)
     *(.got1)
@@ -123,6 +123,7 @@ SECTIONS
    *(.dynbss)
    *(.bss)
    *(COMMON)
+   . = ALIGN(4);
   }
   _end = . ;
   PROVIDE (end = .);
diff --git a/board/ivm/u-boot.lds.debug b/board/ivm/u-boot.lds.debug
index 995fc8327..4d49f1bbe 100644
--- a/board/ivm/u-boot.lds.debug
+++ b/board/ivm/u-boot.lds.debug
@@ -62,7 +62,7 @@ SECTIONS
     lib_ppc/extable.o	(.text)
 
     . = env_offset;
-    common/environment.o(.text)
+    common/env_embedded.o(.text)
 
     *(.text)
     *(.fixup)
diff --git a/board/ixdp425/flash.c b/board/ixdp425/flash.c
index 704dea863..f1d9190ea 100644
--- a/board/ixdp425/flash.c
+++ b/board/ixdp425/flash.c
@@ -28,7 +28,7 @@
 #include <linux/byteorder/swab.h>
 
 
-flash_info_t flash_info[CFG_MAX_FLASH_BANKS];	/* info for FLASH chips        */
+flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];	/* info for FLASH chips        */
 
 /* Board support for 1 or 2 flash devices */
 #undef FLASH_PORT_WIDTH32
@@ -65,7 +65,7 @@ unsigned long flash_init (void)
 	int i;
 	ulong size = 0;
 
-	for (i = 0; i < CFG_MAX_FLASH_BANKS; i++) {
+	for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) {
 		switch (i) {
 		case 0:
 			flash_get_size ((FPW *) PHYS_FLASH_1, &flash_info[i]);
@@ -81,13 +81,13 @@ unsigned long flash_init (void)
 	/* Protect monitor and environment sectors
 	 */
 	flash_protect (FLAG_PROTECT_SET,
-		       CFG_FLASH_BASE,
-		       CFG_FLASH_BASE + _bss_start - _armboot_start,
+		       CONFIG_SYS_FLASH_BASE,
+		       CONFIG_SYS_FLASH_BASE + _bss_start - _armboot_start,
 		       &flash_info[0]);
 
 	flash_protect (FLAG_PROTECT_SET,
-		       CFG_ENV_ADDR,
-		       CFG_ENV_ADDR + CFG_ENV_SIZE - 1, &flash_info[0]);
+		       CONFIG_ENV_ADDR,
+		       CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1, &flash_info[0]);
 
 	return size;
 }
@@ -198,10 +198,10 @@ static ulong flash_get_size (FPW * addr, flash_info_t * info)
 		break;
 	}
 
-	if (info->sector_count > CFG_MAX_FLASH_SECT) {
+	if (info->sector_count > CONFIG_SYS_MAX_FLASH_SECT) {
 		printf ("** ERROR: sector count %d > max (%d) **\n",
-			info->sector_count, CFG_MAX_FLASH_SECT);
-		info->sector_count = CFG_MAX_FLASH_SECT;
+			info->sector_count, CONFIG_SYS_MAX_FLASH_SECT);
+		info->sector_count = CONFIG_SYS_MAX_FLASH_SECT;
 	}
 
 	addr[0] = (FPW) 0x00FF00FF;	/* restore read mode */
@@ -270,7 +270,7 @@ int flash_erase (flash_info_t * info, int s_first, int s_last)
 				 *addr) & (FPW) 0x00800080) !=
 			       (FPW) 0x00800080) {
 				if (get_timer_masked () >
-				    CFG_FLASH_ERASE_TOUT) {
+				    CONFIG_SYS_FLASH_ERASE_TOUT) {
 					printf ("Timeout\n");
 					*addr = (FPW) 0x00B000B0;	/* suspend erase         */
 					*addr = (FPW) 0x00FF00FF;	/* reset to read mode */
@@ -406,7 +406,7 @@ static int write_data (flash_info_t * info, ulong dest, FPW data)
 
 	/* wait while polling the status register */
 	while (((status = *addr) & (FPW) 0x00800080) != (FPW) 0x00800080) {
-		if (get_timer_masked () > CFG_FLASH_WRITE_TOUT) {
+		if (get_timer_masked () > CONFIG_SYS_FLASH_WRITE_TOUT) {
 			*addr = (FPW) 0x00FF00FF;	/* restore read mode */
 			return (1);
 		}
diff --git a/board/ixdp425/ixdp425.c b/board/ixdp425/ixdp425.c
index e0d763780..43ac8f6a4 100644
--- a/board/ixdp425/ixdp425.c
+++ b/board/ixdp425/ixdp425.c
@@ -31,6 +31,7 @@
 #include <common.h>
 #include <command.h>
 #include <malloc.h>
+#include <netdev.h>
 #include <asm/arch/ixp425.h>
 
 DECLARE_GLOBAL_DATA_PTR;
@@ -53,25 +54,25 @@ int board_init (void)
 	/*
 	 * Get realtek RTL8305 switch and SLIC out of reset
 	 */
-	GPIO_OUTPUT_SET(CFG_GPIO_SWITCH_RESET_N);
-	GPIO_OUTPUT_ENABLE(CFG_GPIO_SWITCH_RESET_N);
-	GPIO_OUTPUT_SET(CFG_GPIO_SLIC_RESET_N);
-	GPIO_OUTPUT_ENABLE(CFG_GPIO_SLIC_RESET_N);
+	GPIO_OUTPUT_SET(CONFIG_SYS_GPIO_SWITCH_RESET_N);
+	GPIO_OUTPUT_ENABLE(CONFIG_SYS_GPIO_SWITCH_RESET_N);
+	GPIO_OUTPUT_SET(CONFIG_SYS_GPIO_SLIC_RESET_N);
+	GPIO_OUTPUT_ENABLE(CONFIG_SYS_GPIO_SLIC_RESET_N);
 
 	/*
 	 * Setup GPIO's for PCI INTA & INTB
 	 */
-	GPIO_OUTPUT_DISABLE(CFG_GPIO_PCI_INTA_N);
-	GPIO_INT_ACT_LOW_SET(CFG_GPIO_PCI_INTA_N);
-	GPIO_OUTPUT_DISABLE(CFG_GPIO_PCI_INTB_N);
-	GPIO_INT_ACT_LOW_SET(CFG_GPIO_PCI_INTB_N);
+	GPIO_OUTPUT_DISABLE(CONFIG_SYS_GPIO_PCI_INTA_N);
+	GPIO_INT_ACT_LOW_SET(CONFIG_SYS_GPIO_PCI_INTA_N);
+	GPIO_OUTPUT_DISABLE(CONFIG_SYS_GPIO_PCI_INTB_N);
+	GPIO_INT_ACT_LOW_SET(CONFIG_SYS_GPIO_PCI_INTB_N);
 
 	/*
 	 * Setup GPIO's for 33MHz clock output
 	 */
 	*IXP425_GPIO_GPCLKR = 0x01FF01FF;
-	GPIO_OUTPUT_ENABLE(CFG_GPIO_PCI_CLK);
-	GPIO_OUTPUT_ENABLE(CFG_GPIO_EXTBUS_CLK);
+	GPIO_OUTPUT_ENABLE(CONFIG_SYS_GPIO_PCI_CLK);
+	GPIO_OUTPUT_ENABLE(CONFIG_SYS_GPIO_EXTBUS_CLK);
 #endif
 
 	return 0;
@@ -118,3 +119,8 @@ void pci_init_board(void)
 	pci_ixp_init(&hose);
 }
 #endif
+
+int board_eth_init(bd_t *bis)
+{
+	return pci_eth_init(bis);
+}
diff --git a/board/ixdp425/u-boot.lds b/board/ixdp425/u-boot.lds
index 58393d0af..f46a7c7e5 100644
--- a/board/ixdp425/u-boot.lds
+++ b/board/ixdp425/u-boot.lds
@@ -51,6 +51,6 @@ SECTIONS
 
 	. = ALIGN(4);
 	__bss_start = .;
-	.bss (NOLOAD) : { *(.bss) }
+	.bss (NOLOAD) : { *(.bss) . = ALIGN(4); }
 	_end = .;
 }
diff --git a/board/jse/flash.c b/board/jse/flash.c
index c462fe031..92acdb102 100644
--- a/board/jse/flash.c
+++ b/board/jse/flash.c
@@ -32,10 +32,10 @@
 #include <ppc4xx.h>
 #include <asm/processor.h>
 
-#if CFG_MAX_FLASH_BANKS != 1
-#error "CFG_MAX_FLASH_BANKS must be 1"
+#if CONFIG_SYS_MAX_FLASH_BANKS != 1
+#error "CONFIG_SYS_MAX_FLASH_BANKS must be 1"
 #endif
-flash_info_t flash_info[CFG_MAX_FLASH_BANKS];	/* info for FLASH chips	*/
+flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];	/* info for FLASH chips	*/
 
 /*-----------------------------------------------------------------------
  * Functions
@@ -281,7 +281,7 @@ int wait_for_DQ7 (flash_info_t * info, int sect)
 	last = start;
 	while ((addr[0] & (FLASH_WORD_SIZE) 0x00800080) !=
 	       (FLASH_WORD_SIZE) 0x00800080) {
-		if ((now = get_timer (start)) > CFG_FLASH_ERASE_TOUT) {
+		if ((now = get_timer (start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
 			printf ("Timeout\n");
 			return -1;
 		}
@@ -510,7 +510,7 @@ static int write_word (flash_info_t * info, ulong dest, ulong data)
 		while ((dest2[i] & (FLASH_WORD_SIZE) 0x00800080) !=
 		       (data2[i] & (FLASH_WORD_SIZE) 0x00800080)) {
 
-			if (get_timer (start) > CFG_FLASH_WRITE_TOUT) {
+			if (get_timer (start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
 				return (1);
 			}
 		}
diff --git a/board/jse/jse.c b/board/jse/jse.c
index 929081468..6a6b9dd74 100644
--- a/board/jse/jse.c
+++ b/board/jse/jse.c
@@ -67,7 +67,7 @@ int board_early_init_f (void)
 
 	/* EBC0_B1CR: BAS=x, BS=0(1MB), BU=3(R/W), BW=0(8bits) */
 	mtdcr (ebccfga, pb1cr);
-	mtdcr (ebccfgd, CFG_SYSTEMACE_BASE | 0x00018000);
+	mtdcr (ebccfgd, CONFIG_SYS_SYSTEMACE_BASE | 0x00018000);
 
 	/* Enable the /PerWE output as /PerWE, instead of /PCIINT. */
 	/* CPC0_CR1 |= PCIPW */
@@ -95,11 +95,11 @@ int checkboard (void)
 
 	/* check that the SystemACE chip is alive. */
 	printf ("ACE:   ");
-	vers = readw (CFG_SYSTEMACE_BASE + 0x16);
+	vers = readw (CONFIG_SYS_SYSTEMACE_BASE + 0x16);
 	printf ("SystemACE %u.%u (build %u)",
 		(vers >> 12) & 0x0f, (vers >> 8) & 0x0f, vers & 0xff);
 
-	status = readl (CFG_SYSTEMACE_BASE + 0x04);
+	status = readl (CONFIG_SYS_SYSTEMACE_BASE + 0x04);
 #ifdef DEBUG
 	printf (" STATUS=0x%08x", status);
 #endif
@@ -110,23 +110,23 @@ int checkboard (void)
 
 		if (status & 0x04) {
 			/* CONTROLREG = CFGPROG */
-			writew (0x1000, CFG_SYSTEMACE_BASE + 0x18);
+			writew (0x1000, CONFIG_SYS_SYSTEMACE_BASE + 0x18);
 			udelay (500);
 			/* CONTROLREG = CFGRESET */
-			writew (0x0080, CFG_SYSTEMACE_BASE + 0x18);
+			writew (0x0080, CONFIG_SYS_SYSTEMACE_BASE + 0x18);
 			udelay (500);
-			writew (0x0000, CFG_SYSTEMACE_BASE + 0x18);
+			writew (0x0000, CONFIG_SYS_SYSTEMACE_BASE + 0x18);
 			/* CONTROLREG = CFGSTART */
-			writew (0x0020, CFG_SYSTEMACE_BASE + 0x18);
+			writew (0x0020, CONFIG_SYS_SYSTEMACE_BASE + 0x18);
 
-			status = readl (CFG_SYSTEMACE_BASE + 0x04);
+			status = readl (CONFIG_SYS_SYSTEMACE_BASE + 0x04);
 		}
 	}
 
 	/* Wait for the SystemACE to program its chain of devices. */
 	while ((status & 0x84) == 0x00) {
 		udelay (500);
-		status = readl (CFG_SYSTEMACE_BASE + 0x04);
+		status = readl (CONFIG_SYS_SYSTEMACE_BASE + 0x04);
 	}
 
 	if (status & 0x04)
diff --git a/board/jse/sdram.c b/board/jse/sdram.c
index 8ba6c454f..a1f526de6 100644
--- a/board/jse/sdram.c
+++ b/board/jse/sdram.c
@@ -151,7 +151,7 @@ int testdram (void)
 	/* Start memory test. */
 	printf ("test: %u MB - ", SDRAM_LEN / 1048576);
 
-	sdram = (unsigned long *) CFG_SDRAM_BASE;
+	sdram = (unsigned long *) CONFIG_SYS_SDRAM_BASE;
 
 	printf ("write - ");
 	for (idx = 2; idx < SDRAM_LEN / 4; idx += 2) {
diff --git a/board/jse/u-boot.lds b/board/jse/u-boot.lds
index 7e060cbfd..7141c5a39 100644
--- a/board/jse/u-boot.lds
+++ b/board/jse/u-boot.lds
@@ -65,7 +65,7 @@ SECTIONS
     cpu/ppc4xx/kgdb.o	(.text)
 
 /*    . = env_offset;*/
-/*    common/environment.o(.text)*/
+/*    common/env_embedded.o(.text)*/
 
     *(.text)
     *(.fixup)
@@ -136,6 +136,7 @@ SECTIONS
    *(.dynbss)
    *(.bss)
    *(COMMON)
+   . = ALIGN(4);
   }
   _end = . ;
   PROVIDE (end = .);
diff --git a/board/jupiter/jupiter.c b/board/jupiter/jupiter.c
index 7913c7537..6e752c655 100644
--- a/board/jupiter/jupiter.c
+++ b/board/jupiter/jupiter.c
@@ -45,7 +45,7 @@
 #define SDRAM_CONFIG2	0x88b70004
 #endif
 
-#ifndef CFG_RAMBOOT
+#ifndef CONFIG_SYS_RAMBOOT
 static void sdram_start (int hi_addr)
 {
 	long hi_addr_bit = hi_addr ? 0x01000000 : 0;
@@ -88,7 +88,7 @@ static void sdram_start (int hi_addr)
 
 /*
  * ATTENTION: Although partially referenced initdram does NOT make real use
- *            use of CFG_SDRAM_BASE. The code does not work if CFG_SDRAM_BASE
+ *            use of CONFIG_SYS_SDRAM_BASE. The code does not work if CONFIG_SYS_SDRAM_BASE
  *            is something else than 0x00000000.
  */
 
@@ -98,7 +98,7 @@ phys_size_t initdram (int board_type)
 	ulong dramsize2 = 0;
 	uint svr, pvr;
 
-#ifndef CFG_RAMBOOT
+#ifndef CONFIG_SYS_RAMBOOT
 	ulong test1, test2;
 
 	/* setup SDRAM chip selects */
@@ -119,9 +119,9 @@ phys_size_t initdram (int board_type)
 
 	/* find RAM size using SDRAM CS0 only */
 	sdram_start(0);
-	test1 = get_ram_size((long *)CFG_SDRAM_BASE, 0x80000000);
+	test1 = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE, 0x80000000);
 	sdram_start(1);
-	test2 = get_ram_size((long *)CFG_SDRAM_BASE, 0x80000000);
+	test2 = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE, 0x80000000);
 	if (test1 > test2) {
 		sdram_start(0);
 		dramsize = test1;
@@ -147,10 +147,10 @@ phys_size_t initdram (int board_type)
 	/* find RAM size using SDRAM CS1 only */
 	if (!dramsize)
 		sdram_start(0);
-	test2 = test1 = get_ram_size((long *)(CFG_SDRAM_BASE + dramsize), 0x80000000);
+	test2 = test1 = get_ram_size((long *)(CONFIG_SYS_SDRAM_BASE + dramsize), 0x80000000);
 	if (!dramsize) {
 		sdram_start(1);
-		test2 = get_ram_size((long *)(CFG_SDRAM_BASE + dramsize), 0x80000000);
+		test2 = get_ram_size((long *)(CONFIG_SYS_SDRAM_BASE + dramsize), 0x80000000);
 	}
 	if (test1 > test2) {
 		sdram_start(0);
@@ -172,7 +172,7 @@ phys_size_t initdram (int board_type)
 		*(vu_long *)MPC5XXX_SDRAM_CS1CFG = dramsize; /* disabled */
 	}
 
-#else /* CFG_RAMBOOT */
+#else /* CONFIG_SYS_RAMBOOT */
 
 	/* retrieve size of memory connected to SDRAM CS0 */
 	dramsize = *(vu_long *)MPC5XXX_SDRAM_CS0CFG & 0xFF;
@@ -190,7 +190,7 @@ phys_size_t initdram (int board_type)
 		dramsize2 = 0;
 	}
 
-#endif /* CFG_RAMBOOT */
+#endif /* CONFIG_SYS_RAMBOOT */
 
 	/*
 	 * On MPC5200B we need to set the special configuration delay in the
@@ -244,9 +244,9 @@ void flash_afterinit(ulong size)
 {
 	if (size == 0x1000000) { /* adjust mapping */
 		*(vu_long *)MPC5XXX_BOOTCS_START = *(vu_long *)MPC5XXX_CS0_START =
-			START_REG(CFG_BOOTCS_START | size);
+			START_REG(CONFIG_SYS_BOOTCS_START | size);
 		*(vu_long *)MPC5XXX_BOOTCS_STOP = *(vu_long *)MPC5XXX_CS0_STOP =
-			STOP_REG(CFG_BOOTCS_START | size, size);
+			STOP_REG(CONFIG_SYS_BOOTCS_START | size, size);
 	}
 #if defined(CONFIG_MPC5200)
 	*(vu_long *)MPC5XXX_ADDECR &= ~(1 << 25); /* disable CS_BOOT */
diff --git a/board/kb9202/u-boot.lds b/board/kb9202/u-boot.lds
index 3b7977672..d0666ac73 100644
--- a/board/kb9202/u-boot.lds
+++ b/board/kb9202/u-boot.lds
@@ -51,6 +51,6 @@ SECTIONS
 
 	. = ALIGN(4);
 	__bss_start = .;
-	.bss (NOLOAD) : { *(.bss) }
+	.bss (NOLOAD) : { *(.bss) . = ALIGN(4); }
 	_end = .;
 }
diff --git a/board/keymile/common/common.c b/board/keymile/common/common.c
new file mode 100644
index 000000000..a4cf24cf7
--- /dev/null
+++ b/board/keymile/common/common.c
@@ -0,0 +1,523 @@
+/*
+ * (C) Copyright 2008
+ * Heiko Schocher, DENX Software Engineering, hs@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <mpc8260.h>
+#include <ioports.h>
+#include <malloc.h>
+#include <hush.h>
+
+#if defined(CONFIG_OF_BOARD_SETUP) && defined(CONFIG_OF_LIBFDT)
+#include <libfdt.h>
+#endif
+
+#if defined(CONFIG_HARD_I2C) || defined(CONFIG_SOFT_I2C)
+#include <i2c.h>
+#endif
+#include <asm/io.h>
+
+extern int i2c_soft_read_pin (void);
+
+int ivm_calc_crc (unsigned char *buf, int len)
+{
+	const unsigned short crc_tab[16] = {
+		0x0000, 0xCC01, 0xD801, 0x1400,
+		0xF001, 0x3C00, 0x2800, 0xE401,
+		0xA001, 0x6C00, 0x7800, 0xB401,
+		0x5000, 0x9C01, 0x8801, 0x4400};
+
+	unsigned short crc     = 0;   /* final result */
+	unsigned short r1      = 0;   /* temp */
+	unsigned char  byte    = 0;   /* input buffer */
+	int	i;
+
+	/* calculate CRC from array data */
+	for (i = 0; i < len; i++) {
+		byte = buf[i];
+
+		/* lower 4 bits */
+		r1 = crc_tab[crc & 0xF];
+		crc = ((crc) >> 4) & 0x0FFF;
+		crc = crc ^ r1 ^ crc_tab[byte & 0xF];
+
+		/* upper 4 bits */
+		r1 = crc_tab[crc & 0xF];
+		crc = (crc >> 4) & 0x0FFF;
+		crc = crc ^ r1 ^ crc_tab[(byte >> 4) & 0xF];
+	}
+	return crc;
+}
+
+static int  ivm_set_value (char *name, char *value)
+{
+	char tempbuf[256];
+
+	if (value != NULL) {
+		sprintf (tempbuf, "%s=%s", name, value);
+		return set_local_var (tempbuf, 0);
+	} else {
+		unset_local_var (name);
+	}
+	return 0;
+}
+
+static int ivm_get_value (unsigned char *buf, int len, char *name, int off,
+				int check)
+{
+	unsigned short	val;
+	unsigned char	valbuf[30];
+
+	if ((buf[off + 0] != buf[off + 2]) &&
+	    (buf[off + 2] != buf[off + 4])) {
+		printf ("%s Error corrupted %s\n", __FUNCTION__, name);
+		val = -1;
+	} else {
+		val = buf[off + 0] + (buf[off + 1] << 8);
+		if ((val == 0) && (check == 1))
+			val = -1;
+	}
+	sprintf ((char *)valbuf, "%x", val);
+	ivm_set_value (name, (char *)valbuf);
+	return val;
+}
+
+#define INVENTORYBLOCKSIZE	0x100
+#define INVENTORYDATAADDRESS	0x21
+#define INVENTORYDATASIZE	(INVENTORYBLOCKSIZE - INVENTORYDATAADDRESS - 3)
+
+#define IVM_POS_SHORT_TEXT		0
+#define IVM_POS_MANU_ID			1
+#define IVM_POS_MANU_SERIAL		2
+#define IVM_POS_PART_NUMBER		3
+#define IVM_POS_BUILD_STATE		4
+#define IVM_POS_SUPPLIER_PART_NUMBER	5
+#define IVM_POS_DELIVERY_DATE		6
+#define IVM_POS_SUPPLIER_BUILD_STATE	7
+#define IVM_POS_CUSTOMER_ID		8
+#define IVM_POS_CUSTOMER_PROD_ID	9
+#define IVM_POS_HISTORY			10
+#define IVM_POS_SYMBOL_ONLY		11
+
+static char convert_char (char c)
+{
+	return (c < ' ' || c > '~') ? '.' : c;
+}
+
+static int ivm_findinventorystring (int type,
+					unsigned char* const string,
+					unsigned long maxlen,
+					unsigned char *buf)
+{
+	int xcode = 0;
+	unsigned long cr = 0;
+	unsigned long addr = INVENTORYDATAADDRESS;
+	unsigned long size = 0;
+	unsigned long nr = type;
+	int stop = 0; 	/* stop on semicolon */
+
+	memset(string, '\0', maxlen);
+	switch (type) {
+		case IVM_POS_SYMBOL_ONLY:
+			nr = 0;
+			stop= 1;
+		break;
+		default:
+			nr = type;
+			stop = 0;
+	}
+
+	/* Look for the requested number of CR. */
+	while ((cr != nr) && (addr < INVENTORYDATASIZE)) {
+		if ((buf[addr] == '\r')) {
+			cr++;
+		}
+		addr++;
+	}
+
+	/* the expected number of CR was found until the end of the IVM
+	 *  content --> fill string */
+	if (addr < INVENTORYDATASIZE) {
+		/* Copy the IVM string in the corresponding string */
+		for (; (buf[addr] != '\r')			&&
+			((buf[addr] != ';') ||  (!stop))	&&
+			(size < (maxlen - 1)			&&
+			(addr < INVENTORYDATASIZE)); addr++)
+		{
+			size += sprintf((char *)string + size, "%c",
+						convert_char (buf[addr]));
+		}
+
+		/* copy phase is done: check if everything is ok. If not,
+		 * the inventory data is most probably corrupted: tell
+		 * the world there is a problem! */
+		if (addr == INVENTORYDATASIZE) {
+			xcode = -1;
+			printf ("Error end of string not found\n");
+		} else if ((size >= (maxlen - 1)) &&
+			   (buf[addr] != '\r')) {
+			xcode = -1;
+			printf ("string too long till next CR\n");
+		}
+	} else {
+		/* some CR are missing...
+		 * the inventory data is most probably corrupted */
+		xcode = -1;
+		printf ("not enough cr found\n");
+	}
+	return xcode;
+}
+
+#define GET_STRING(name, which, len) \
+	if (ivm_findinventorystring (which, valbuf, len, buf) == 0) { \
+		ivm_set_value (name, (char *)valbuf); \
+	}
+
+static int ivm_check_crc (unsigned char *buf, int block)
+{
+	unsigned long	crc;
+	unsigned long	crceeprom;
+
+	crc = ivm_calc_crc (buf, CONFIG_SYS_IVM_EEPROM_PAGE_LEN - 2);
+	crceeprom = (buf[CONFIG_SYS_IVM_EEPROM_PAGE_LEN - 1] + \
+			buf[CONFIG_SYS_IVM_EEPROM_PAGE_LEN - 2] * 256);
+	if (crc != crceeprom) {
+		printf ("Error CRC Block: %d EEprom: calculated: %lx EEprom: %lx\n",
+			block, crc, crceeprom);
+		return -1;
+	}
+	return 0;
+}
+
+static int ivm_analyze_block2 (unsigned char *buf, int len)
+{
+	unsigned char	valbuf[CONFIG_SYS_IVM_EEPROM_PAGE_LEN];
+	unsigned long	count;
+
+	/* IVM_MacAddress */
+	sprintf ((char *)valbuf, "%02X:%02X:%02X:%02X:%02X:%02X",
+			buf[1],
+			buf[2],
+			buf[3],
+			buf[4],
+			buf[5],
+			buf[6]);
+	ivm_set_value ("IVM_MacAddress", (char *)valbuf);
+	if (getenv ("ethaddr") == NULL)
+		setenv ((char *)"ethaddr", (char *)valbuf);
+	/* IVM_MacCount */
+	count = (buf[10] << 24) +
+		   (buf[11] << 16) +
+		   (buf[12] << 8)  +
+		    buf[13];
+	if (count == 0xffffffff)
+		count = 1;
+	sprintf ((char *)valbuf, "%lx", count);
+	ivm_set_value ("IVM_MacCount", (char *)valbuf);
+	return 0;
+}
+
+int ivm_analyze_eeprom (unsigned char *buf, int len)
+{
+	unsigned short	val;
+	unsigned char	valbuf[CONFIG_SYS_IVM_EEPROM_PAGE_LEN];
+	unsigned char	*tmp;
+
+	if (ivm_check_crc (buf, 0) != 0)
+		return -1;
+
+	ivm_get_value (buf, CONFIG_SYS_IVM_EEPROM_PAGE_LEN, "IVM_BoardId", 0, 1);
+	val = ivm_get_value (buf, CONFIG_SYS_IVM_EEPROM_PAGE_LEN, "IVM_HWKey", 6, 1);
+	if (val != 0xffff) {
+		sprintf ((char *)valbuf, "%x", ((val /100) % 10));
+		ivm_set_value ("IVM_HWVariant", (char *)valbuf);
+		sprintf ((char *)valbuf, "%x", (val % 100));
+		ivm_set_value ("IVM_HWVersion", (char *)valbuf);
+	}
+	ivm_get_value (buf, CONFIG_SYS_IVM_EEPROM_PAGE_LEN, "IVM_Functions", 12, 0);
+
+	GET_STRING("IVM_Symbol", IVM_POS_SYMBOL_ONLY, 8)
+	GET_STRING("IVM_DeviceName", IVM_POS_SHORT_TEXT, 64)
+	tmp = (unsigned char *) getenv("IVM_DeviceName");
+	if (tmp) {
+		int	len = strlen ((char *)tmp);
+		int	i = 0;
+
+		while (i < len) {
+			if (tmp[i] == ';') {
+				ivm_set_value ("IVM_ShortText", (char *)&tmp[i + 1]);
+				break;
+			}
+			i++;
+		}
+		if (i >= len)
+			ivm_set_value ("IVM_ShortText", NULL);
+	} else {
+		ivm_set_value ("IVM_ShortText", NULL);
+	}
+	GET_STRING("IVM_ManufacturerID", IVM_POS_MANU_ID, 32)
+	GET_STRING("IVM_ManufacturerSerialNumber", IVM_POS_MANU_SERIAL, 20)
+	GET_STRING("IVM_ManufacturerPartNumber", IVM_POS_PART_NUMBER, 32)
+	GET_STRING("IVM_ManufacturerBuildState", IVM_POS_BUILD_STATE, 32)
+	GET_STRING("IVM_SupplierPartNumber", IVM_POS_SUPPLIER_PART_NUMBER, 32)
+	GET_STRING("IVM_DelieveryDate", IVM_POS_DELIVERY_DATE, 32)
+	GET_STRING("IVM_SupplierBuildState", IVM_POS_SUPPLIER_BUILD_STATE, 32)
+	GET_STRING("IVM_CustomerID", IVM_POS_CUSTOMER_ID, 32)
+	GET_STRING("IVM_CustomerProductID", IVM_POS_CUSTOMER_PROD_ID, 32)
+
+	if (ivm_check_crc (&buf[CONFIG_SYS_IVM_EEPROM_PAGE_LEN * 2], 2) != 0)
+		return -2;
+	ivm_analyze_block2 (&buf[CONFIG_SYS_IVM_EEPROM_PAGE_LEN * 2], CONFIG_SYS_IVM_EEPROM_PAGE_LEN);
+
+	return 0;
+}
+
+int ivm_read_eeprom (void)
+{
+	I2C_MUX_DEVICE *dev = NULL;
+	uchar i2c_buffer[CONFIG_SYS_IVM_EEPROM_MAX_LEN];
+	uchar	*buf;
+	unsigned dev_addr = CONFIG_SYS_IVM_EEPROM_ADR;
+
+	/* First init the Bus, select the Bus */
+#if defined(CONFIG_SYS_I2C_IVM_BUS)
+	dev = i2c_mux_ident_muxstring ((uchar *)CONFIG_SYS_I2C_IVM_BUS);
+#else
+	buf = (unsigned char *) getenv ("EEprom_ivm");
+	if (buf != NULL)
+		dev = i2c_mux_ident_muxstring (buf);
+#endif
+	if (dev == NULL) {
+		printf ("Error couldnt add Bus for IVM\n");
+		return -1;
+	}
+	i2c_set_bus_num (dev->busid);
+
+	buf = (unsigned char *) getenv ("EEprom_ivm_addr");
+	if (buf != NULL)
+		dev_addr = simple_strtoul ((char *)buf, NULL, 16);
+
+	if (eeprom_read (dev_addr, 0, i2c_buffer, CONFIG_SYS_IVM_EEPROM_MAX_LEN) != 0) {
+		printf ("Error reading EEprom\n");
+		return -2;
+	}
+
+	return ivm_analyze_eeprom (i2c_buffer, CONFIG_SYS_IVM_EEPROM_MAX_LEN);
+}
+
+#if defined(CONFIG_SYS_I2C_INIT_BOARD)
+#define DELAY_ABORT_SEQ		62
+#define DELAY_HALF_PERIOD	(500 / (CONFIG_SYS_I2C_SPEED / 1000))
+
+#if defined(CONFIG_MGCOGE)
+#define SDA_MASK	0x00010000
+#define SCL_MASK	0x00020000
+static void set_pin (int state, unsigned long mask)
+{
+	volatile ioport_t *iop = ioport_addr ((immap_t *)CONFIG_SYS_IMMR, 3);
+
+	if (state)
+		iop->pdat |= (mask);
+	else
+		iop->pdat &= ~(mask);
+
+	iop->pdir |= (mask);
+}
+
+static int get_pin (unsigned long mask)
+{
+	volatile ioport_t *iop = ioport_addr ((immap_t *)CONFIG_SYS_IMMR, 3);
+
+	iop->pdir &= ~(mask);
+	return (0 != (iop->pdat & (mask)));
+}
+
+static void set_sda (int state)
+{
+	set_pin (state, SDA_MASK);
+}
+
+static void set_scl (int state)
+{
+	set_pin (state, SCL_MASK);
+}
+
+static int get_sda (void)
+{
+	return get_pin (SDA_MASK);
+}
+
+static int get_scl (void)
+{
+	return get_pin (SCL_MASK);
+}
+
+#if defined(CONFIG_HARD_I2C)
+static void setports (int gpio)
+{
+	volatile ioport_t *iop = ioport_addr ((immap_t *)CONFIG_SYS_IMMR, 3);
+
+	if (gpio) {
+		iop->ppar &= ~(SDA_MASK | SCL_MASK);
+		iop->podr &= ~(SDA_MASK | SCL_MASK);
+	} else {
+		iop->ppar |= (SDA_MASK | SCL_MASK);
+		iop->pdir &= ~(SDA_MASK | SCL_MASK);
+		iop->podr |= (SDA_MASK | SCL_MASK);
+	}
+}
+#endif
+#endif
+
+#if defined(CONFIG_MGSUVD)
+static void set_sda (int state)
+{
+	I2C_SDA(state);
+}
+
+static void set_scl (int state)
+{
+	I2C_SCL(state);
+}
+
+static int get_sda (void)
+{
+	return I2C_READ;
+}
+
+static int get_scl (void)
+{
+	int	val;
+
+	*(unsigned short *)(I2C_BASE_DIR) &=  ~SCL_CONF;
+	udelay (1);
+	val = *(unsigned char *)(I2C_BASE_PORT);
+
+	return ((val & SCL_BIT) == SCL_BIT);
+}
+
+#endif
+
+static void writeStartSeq (void)
+{
+	set_sda (1);
+	udelay (DELAY_HALF_PERIOD);
+	set_scl (1);
+	udelay (DELAY_HALF_PERIOD);
+	set_sda (0);
+	udelay (DELAY_HALF_PERIOD);
+	set_scl (0);
+	udelay (DELAY_HALF_PERIOD);
+}
+
+/* I2C is a synchronous protocol and resets of the processor in the middle
+   of an access can block the I2C Bus until a powerdown of the full unit is
+   done. This function toggles the SCL until the SCL and SCA line are
+   released, but max. 16 times, after this a I2C start-sequence is sent.
+   This I2C Deblocking mechanism was developed by Keymile in association
+   with Anatech and Atmel in 1998.
+ */
+static int i2c_make_abort (void)
+{
+	int	scl_state = 0;
+	int	sda_state = 0;
+	int	i = 0;
+	int	ret = 0;
+
+	if (!get_sda ()) {
+		ret = -1;
+		while (i < 16) {
+			i++;
+			set_scl (0);
+			udelay (DELAY_ABORT_SEQ);
+			set_scl (1);
+			udelay (DELAY_ABORT_SEQ);
+			scl_state = get_scl ();
+			sda_state = get_sda ();
+			if (scl_state && sda_state) {
+				ret = 0;
+				break;
+			}
+		}
+	}
+	if (ret == 0) {
+		for (i =0; i < 5; i++) {
+			writeStartSeq ();
+		}
+	}
+	get_sda ();
+	return ret;
+}
+
+/**
+ * i2c_init_board - reset i2c bus. When the board is powercycled during a
+ * bus transfer it might hang; for details see doc/I2C_Edge_Conditions.
+ */
+void i2c_init_board(void)
+{
+#if defined(CONFIG_HARD_I2C)
+	volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR ;
+	volatile i2c8260_t *i2c	= (i2c8260_t *)&immap->im_i2c;
+
+	/* disable I2C controller first, otherwhise it thinks we want to    */
+	/* talk to the slave port...                                        */
+	i2c->i2c_i2mod &= ~0x01;
+
+	/* Set the PortPins to GPIO */
+	setports (1);
+#endif
+
+	/* Now run the AbortSequence() */
+	i2c_make_abort ();
+
+#if defined(CONFIG_HARD_I2C)
+	/* Set the PortPins back to use for I2C */
+	setports (0);
+#endif
+}
+#endif
+
+#if defined(CONFIG_OF_BOARD_SETUP) && defined(CONFIG_OF_LIBFDT)
+int fdt_set_node_and_value (void *blob,
+				char *nodename,
+				char *regname,
+				void *var,
+				int size)
+{
+	int ret = 0;
+	int nodeoffset = 0;
+
+	nodeoffset = fdt_path_offset (blob, nodename);
+	if (nodeoffset >= 0) {
+		ret = fdt_setprop (blob, nodeoffset, regname, var,
+					size);
+		if (ret < 0)
+			printf("ft_blob_update(): cannot set %s/%s "
+				"property err:%s\n", nodename, regname,
+				fdt_strerror (ret));
+	} else {
+		printf("ft_blob_update(): cannot find %s node "
+			"err:%s\n", nodename, fdt_strerror (nodeoffset));
+	}
+	return ret;
+}
+#endif
diff --git a/board/keymile/common/keymile_hdlc_enet.c b/board/keymile/common/keymile_hdlc_enet.c
new file mode 100644
index 000000000..141371b8f
--- /dev/null
+++ b/board/keymile/common/keymile_hdlc_enet.c
@@ -0,0 +1,620 @@
+/*
+ * (C) Copyright 2008
+ * Gary Jennejohn, DENX Software Engineering GmbH, garyj@denx.de.
+ *
+ * Based in part on cpu/mpc8260/ether_scc.c.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <malloc.h>
+#include <net.h>
+
+#ifdef CONFIG_KEYMILE_HDLC_ENET
+#ifdef TEST_IT
+#include <command.h>
+#endif
+
+#include "keymile_hdlc_enet.h"
+
+extern char keymile_slot;	/* our slot number in the backplane */
+
+/* Allow up to about 50 ms for sending */
+#define TOUT_LOOP	50000
+
+/*
+ * Since, except during initialization, ethact is always HDLC ETHERNET
+ * while we're in the driver, just use serial_printf() everywhere for
+ * output.  This avoids possible conflicts when netconsole is being
+ * used.
+ */
+#define dprintf(fmt, args...)	serial_printf(fmt, ##args)
+
+/* Cannot use the storage from net.c because we allocate larger buffers */
+static volatile uchar MyPktBuf[HDLC_PKTBUFSRX * PKT_MAXBLR_SIZE + PKTALIGN];
+static volatile uchar *MyRxPackets[HDLC_PKTBUFSRX]; /* Receive packet */
+
+static unsigned int keymile_rxIdx;	/* index of the current RX buffer */
+
+static IPaddr_t cachedNumbers[CACHEDNUMBERS]; /* 4 bytes per entry */
+void initCachedNumbers(int);
+
+/*
+  * SCC Ethernet Tx and Rx buffer descriptors allocated at the
+  *  immr->udata_bd address on Dual-Port RAM
+  * Provide for Double Buffering
+  */
+typedef volatile struct CommonBufferDescriptor {
+    cbd_t txbd;			/* Tx BD */
+    cbd_t rxbd[HDLC_PKTBUFSRX];	/* Rx BD */
+} RTXBD;
+
+/*
+ * This must be extern because it is allocated in DPRAM using CPM-sepcific
+ * code.
+ */
+static RTXBD *rtx;
+
+static int keymile_hdlc_enet_send(struct eth_device *, volatile void *, int);
+static int keymile_hdlc_enet_recv(struct eth_device *);
+void keymile_hdlc_enet_init_bds(RTXBD *);
+extern int keymile_hdlc_enet_init(struct eth_device *, bd_t *);
+extern void keymile_hdlc_enet_halt(struct eth_device *);
+
+/* flags in the buffer descriptor not defined anywhere else */
+#define BD_SC_CT	BD_SC_CD
+#define BD_SC_CR	0x04
+#define BD_SC_DE	0x80
+#ifndef BD_SC_TC
+#define BD_SC_TC	((ushort)0x0400)	/* Transmit CRC */
+#endif
+#define BD_SC_FIRST	BD_SC_TC
+#define BD_SC_STATS (BD_SC_BR | BD_SC_FR | BD_SC_PR | BD_SC_CR | BD_SC_CD \
+		| BD_SC_OV | BD_SC_DE)
+
+#if defined(TEST_RX) || defined(TEST_TX) || defined(TEST_IT)
+static void hexdump(unsigned char *buf, int len)
+{
+	int i;
+	const int bytesPerLine = 32;
+
+	if (len > 4 * bytesPerLine)
+		len = 4 * bytesPerLine;
+	dprintf("\t address: %08x\n", (unsigned int)buf);
+	for (i = 0; i < len; i++) {
+		if (i % bytesPerLine == 0)
+			dprintf("%04x: ", (unsigned short)i);
+		dprintf("%02x ", buf[i]);
+		if ((i + 1) % bytesPerLine == 0) {
+			dprintf("\n");
+			continue;
+		}
+		if ((i + 1) % 8 == 0)
+			printf(" ");
+	}
+	if (len % bytesPerLine)
+		dprintf("\n");
+}
+#endif
+
+int keymile_hdlc_enet_initialize(bd_t *bis)
+{
+	struct eth_device *dev;
+
+	dev = (struct eth_device *) malloc(sizeof *dev);
+	memset(dev, 0, sizeof *dev);
+#ifdef TEST_IT
+	seth = dev;
+#endif
+
+	sprintf(dev->name, "HDLC ETHERNET");
+	dev->init   = keymile_hdlc_enet_init;
+	dev->halt   = keymile_hdlc_enet_halt;
+	dev->send   = keymile_hdlc_enet_send;
+	dev->recv   = keymile_hdlc_enet_recv;
+
+	eth_register(dev);
+
+	return 1;
+}
+
+/*
+ * This is called from the board-specific driver after rtx is allocated.
+ */
+void keymile_hdlc_enet_init_bds(RTXBD *board_rtx)
+{
+	volatile cbd_t *bdp;
+	int i;
+
+	rtx = board_rtx;
+	keymile_rxIdx = 0;
+	/*
+	 * Initialize the buffer descriptors.
+	 */
+	bdp = &rtx->txbd;
+	bdp->cbd_sc = 0;
+	bdp->cbd_bufaddr = 0;
+	bdp->cbd_sc = BD_SC_WRAP;
+
+	/*
+	 *	Setup RX packet buffers, aligned correctly.
+	 *	Borrowed from net/net.c.
+	 */
+	MyRxPackets[0] = &MyPktBuf[0] + (PKTALIGN - 1);
+	MyRxPackets[0] -= (ulong)MyRxPackets[0] % PKTALIGN;
+	for (i = 1; i < HDLC_PKTBUFSRX; i++)
+		MyRxPackets[i] = MyRxPackets[0] + i * PKT_MAXBLR_SIZE;
+
+	bdp = &rtx->rxbd[0];
+	for (i = 0; i < HDLC_PKTBUFSRX; i++) {
+		bdp->cbd_sc = BD_SC_EMPTY;
+		/* Leave space at the start for INET header. */
+		bdp->cbd_bufaddr = (unsigned int)(MyRxPackets[i] +
+			INET_HDR_ALIGN);
+		bdp++;
+	}
+	bdp--;
+	bdp->cbd_sc |= BD_SC_WRAP;
+}
+
+/*
+ * This returns the current port number for NETCONSOLE.  If nc_port
+ * in netconsole.c weren't declared static we wouldn't need this.
+ */
+static short get_netcons_port(void)
+{
+	char *p;
+	short nc_port;
+
+	nc_port = 6666; /* default */
+
+	p = getenv("ncip");
+	if (p != NULL) {
+		p = strchr(p, ':');
+		if (p != NULL)
+			nc_port = simple_strtoul(p + 1, NULL, 10);
+	}
+
+	return htons(nc_port);
+}
+
+/*
+ * Read the port numbers from the variables
+ */
+void initCachedNumbers(int verbose)
+{
+	char *str;
+	ushort port;
+
+	/* already in network order */
+	cachedNumbers[IP_ADDR] = getenv_IPaddr("ipaddr");
+	/* already in network order */
+	cachedNumbers[IP_SERVER] = getenv_IPaddr("serverip");
+	str = getenv("tftpsrcp");
+	if (str != NULL) {
+		/* avoid doing htons() again and again */
+		port = htons((ushort)simple_strtol(str, NULL, 10));
+		cachedNumbers[TFTP_SRC_PORT] = port;
+	} else
+		/* this can never be a valid port number */
+		cachedNumbers[TFTP_SRC_PORT] = (ulong)-1;
+	str = getenv("tftpdstp");
+	if (str != NULL) {
+		/* avoid doing htons() again and again */
+		port = htons((ushort)simple_strtol(str, NULL, 10));
+		cachedNumbers[TFTP_DST_PORT] = port;
+	} else
+		/* this is the default value */
+		cachedNumbers[TFTP_DST_PORT] = htons(WELL_KNOWN_PORT);
+	/* already in network order */
+	cachedNumbers[NETCONS_PORT] = get_netcons_port();
+	if (verbose) {
+		dprintf("\nIP Number Initialization:\n");
+		dprintf(" ip address          %08lx\n", cachedNumbers[IP_ADDR]);
+		dprintf(" server ip address   %08lx\n",
+			cachedNumbers[IP_SERVER]);
+		dprintf(" tftp client port    %ld\n",
+			cachedNumbers[TFTP_SRC_PORT]);
+		dprintf(" tftp server port    %ld\n",
+			cachedNumbers[TFTP_DST_PORT]);
+		dprintf(" netcons port        %ld\n",
+			cachedNumbers[NETCONS_PORT]);
+		dprintf(" slot number (hex)   %02x\n", keymile_slot);
+	}
+}
+
+static void keymile_hdlc_enet_doarp(volatile void *packet, int len)
+{
+	ARP_t *arp;
+	IPaddr_t src_ip; /* U-Boot's IP */
+	IPaddr_t dest_ip; /* the mgcoge's IP */
+	unsigned char *packet_copy = malloc(len);
+
+	/*
+	 * Handling an ARP request means that a new transfer has started.
+	 * Update our cached parameters now.
+	 */
+	initCachedNumbers(0); /* may reinit port numbers */
+
+	/* special handling required for ARP */
+	arp = (ARP_t *)(packet + ETHER_HDR_SIZE);
+	/*
+	 *	XXXX
+	 * This is pretty dirty!  NetReceive only uses
+	 * a few fields when handling an ARP reply, so
+	 * we only modify those here.  This could
+	 * result in catastrophic failure at a later
+	 * time if the handler is modified!
+	 */
+	arp->ar_op = htons(ARPOP_REPLY);
+	/* save his/our IP */
+	src_ip = NetReadIP(&arp->ar_data[6]);
+	dest_ip = NetReadIP(&arp->ar_data[16]);
+	/* copy target IP to source IP */
+	NetCopyIP(&arp->ar_data[6], &dest_ip);
+	/* copy our IP to the right place */
+	NetCopyIP(&arp->ar_data[16], &src_ip);
+	/* always use 0x7f as the MAC for the coge */
+	arp->ar_data[0] = HDLC_UACUA;
+	/*
+	 * copy the packet
+	 * if NetReceive wants to write to stdout, it may overwrite packet
+	 * especially if stdout is set to nc!
+	 *
+	 * However, if the malloc() above fails then we can still try the
+	 * original packet, rather than causing the transfer to fail.
+	 */
+	if (packet_copy != NULL) {
+		memcpy(packet_copy, (char *)packet, len);
+		NetReceive(packet_copy, len);
+		free(packet_copy);
+	} else
+		NetReceive(packet, len);
+}
+
+/*
+ * NOTE all callers ignore the returned value!
+ * At the moment this only handles ARP Requests, TFTP and NETCONSOLE.
+ */
+static int keymile_hdlc_enet_send(struct eth_device *dev, volatile void *packet,
+	int len)
+{
+	int j;
+	uint data_addr;
+	int data_len;
+	struct icn_hdr header;
+	struct icn_frame *frame;
+	Ethernet_t *et;
+	ARP_t *arp;
+	IP_t *ip;
+
+	if (len > (MAX_FRAME_LENGTH - sizeof(header)))
+		return -1;
+
+	frame = NULL;
+	et = NULL;
+	arp = NULL;
+	ip = NULL;
+
+	j = 0;
+	while ((rtx->txbd.cbd_sc & BD_SC_READY) && (j < TOUT_LOOP)) {
+		/* will also trigger Wd if needed, but maybe too often  */
+		udelay(1);
+		j++;
+	}
+	if (j >= TOUT_LOOP) {
+		dprintf("TX not ready sc %x\n", rtx->txbd.cbd_sc);
+		return -1;
+	}
+
+	/*
+	 * First check for an ARP Request since this requires special handling.
+	 */
+	if (len >= (ARP_HDR_SIZE + ETHER_HDR_SIZE)) {
+		et = (Ethernet_t *)packet;
+		arp = (ARP_t *)(((char *)et) + ETHER_HDR_SIZE);
+		/* ARP and REQUEST? */
+		if (et->et_protlen == PROT_ARP &&
+			arp->ar_op == htons(ARPOP_REQUEST)) {
+			/* just short-circuit the request on the U-Boot side */
+			keymile_hdlc_enet_doarp(packet, len);
+			return 0;
+		}
+	}
+
+	/*
+	 * GJ - I suppose the assumption here that len will always be
+	 * > INET_HDR_SIZE is alright as long as the network stack
+	 * isn't changed.
+	 * Do not send INET header.
+	 */
+	data_len = len + sizeof(header) - INET_HDR_SIZE;
+	frame = (struct icn_frame *) (((char *)packet) + INET_HDR_SIZE -
+		sizeof(header));
+
+#ifdef TEST_TX
+	printf("frame: %08x, ", frame);
+	hexdump((unsigned char *)packet, data_len + INET_HDR_SIZE);
+#endif
+
+	data_addr = (uint)frame;
+	if (len >= (IP_HDR_SIZE + ETHER_HDR_SIZE))
+		ip = (IP_t *)(packet + ETHER_HDR_SIZE);
+	/* Is it TFTP? TFTP always uses UDP and the cached dport */
+	if (ip != NULL && ip->ip_p == IPPROTO_UDP && ip->udp_dst ==
+			(ushort)cachedNumbers[TFTP_DST_PORT]) {
+		/* just in case the port wasn't set in the environment */
+		if (cachedNumbers[TFTP_SRC_PORT] == (ulong)-1)
+			cachedNumbers[TFTP_SRC_PORT] = ip->udp_src;
+		frame->hdr.application = MGS_TFTP;
+	}
+	/*
+	 * Is it NETCONSOLE?  NETCONSOLE always uses UDP.
+	 */
+	else if (ip != NULL && ip->ip_p == IPPROTO_UDP
+		&& ip->udp_dst == (ushort)cachedNumbers[NETCONS_PORT]) {
+			frame->hdr.application = MGS_NETCONS;
+	} else {
+		/* reject unknown packets */
+		/* may do some check on frame->hdr.application */
+		dprintf("Unknown packet type in %s, rejected\n",
+			__func__);
+		return -1;
+	}
+	/*
+	 * Could extract the target's slot ID from its MAC here,
+	 * but u-boot only wants to talk to the active server.
+	 *
+	 * avoid setting new source address when moving to another slot
+	 */
+	frame->hdr.src_addr = keymile_slot;
+	frame->hdr.dest_addr = HDLC_UACUA;
+#ifdef TEST_TX
+	{
+		dprintf("TX: ");
+		hexdump((unsigned char *)data_addr, data_len);
+	}
+#endif
+
+	flush_cache(data_addr, data_len);
+	rtx->txbd.cbd_bufaddr = data_addr;
+	rtx->txbd.cbd_datlen = data_len;
+	rtx->txbd.cbd_sc |= (BD_SC_READY | BD_SC_TC | BD_SC_LAST | BD_SC_WRAP);
+
+	while ((rtx->txbd.cbd_sc & BD_SC_READY) && (j < TOUT_LOOP)) {
+		/* will also trigger Wd if needed, but maybe too often  */
+		udelay(1);
+		j++;
+	}
+	if (j >= TOUT_LOOP)
+		dprintf("TX timeout\n");
+#ifdef ET_DEBUG
+	dprintf("cycles: %d    status: %x\n", j, rtx->txbd.cbd_sc);
+#endif
+	j = (rtx->txbd.cbd_sc & BD_SC_STATS); /* return only status bits */
+	return j;
+}
+
+/*
+ * During a receive, the RxIdx points to the current incoming buffer.
+ * When we update through the ring, if the next incoming buffer has
+ * not been given to the system, we just set the empty indicator,
+ * effectively tossing the packet.
+ */
+static int keymile_hdlc_enet_recv(struct eth_device *dev)
+{
+	int length;
+	unsigned char app;
+	struct icn_frame *fp;
+	Ethernet_t *ep;
+	IP_t *ip;
+
+	for (;;) {
+		if (rtx->rxbd[keymile_rxIdx].cbd_sc & BD_SC_EMPTY) {
+			length = -1;
+			break;	/* nothing received - leave for() loop */
+		}
+
+		length = rtx->rxbd[keymile_rxIdx].cbd_datlen;
+#ifdef TEST_RX
+		dprintf("packet %d bytes long\n", length);
+#endif
+
+		/*
+		 * BD_SC_BR -> LG bit
+		 * BD_SC_FR -> NO bit
+		 * BD_SC_PR -> AB bit
+		 * BD_SC_NAK -> CR bit
+		 * 0x80 -> DE bit
+		 */
+		if (rtx->rxbd[keymile_rxIdx].cbd_sc & BD_SC_STATS) {
+#ifdef ET_DEBUG
+			dprintf("err: %x\n", rtx->rxbd[keymile_rxIdx].cbd_sc);
+#endif
+		} else if (length > MAX_FRAME_LENGTH) { /* can't happen */
+#ifdef ET_DEBUG
+			dprintf("err: packet too big\n");
+#endif
+		} else {
+			fp = (struct icn_frame *)(MyRxPackets[keymile_rxIdx] +
+				INET_HDR_ALIGN - INET_HDR_SIZE);
+#ifdef TEST_RX
+			dprintf("RX %d: ", keymile_rxIdx);
+			hexdump((unsigned char *)MyRxPackets[keymile_rxIdx],
+				INET_HDR_ALIGN + INET_HDR_SIZE + 4);
+#endif
+			/* copy icn header to the beginning */
+			memcpy(fp, ((char *)fp + INET_HDR_SIZE),
+				sizeof(struct icn_hdr));
+			app = fp->hdr.application;
+			if (app == MGS_NETCONS || app == MGS_TFTP) {
+				struct icn_hdr *ih = &fp->hdr;
+				unsigned char icn_src_addr = ih->src_addr;
+				unsigned char icn_dest_addr = ih->dest_addr;
+
+				/*
+				 * expand header by INET_HDR_SIZE
+				 */
+				length += INET_HDR_SIZE;
+				/* initalize header */
+				memset((char *)fp->data, 0x00, INET_HDR_SIZE);
+				ep = (Ethernet_t *)fp->data;
+				/* set MACs */
+				ep->et_dest[0] = icn_dest_addr;
+				ep->et_src[0] = icn_src_addr;
+				ep->et_protlen = htons(PROT_IP);
+				/* set ip stuff */
+				ip = (IP_t *)(fp->data + ETHER_HDR_SIZE);
+				/* set ip addresses */
+				ip->ip_src = cachedNumbers[IP_SERVER];
+				ip->ip_dst = cachedNumbers[IP_ADDR];
+				/* ip length */
+				ip->ip_len = htons(length - ETHER_HDR_SIZE -
+					REMOVE);
+				/* ip proto */
+				ip->ip_p = IPPROTO_UDP;
+				switch (app) {
+				case MGS_TFTP:
+					/* swap src/dst port numbers */
+					ip->udp_src = (ushort)
+						cachedNumbers[TFTP_DST_PORT];
+					ip->udp_dst = (ushort)
+						cachedNumbers[TFTP_SRC_PORT];
+					ip->udp_len = ip->ip_len -
+						IP_HDR_SIZE_NO_UDP;
+					ip->udp_xsum = 0;
+					break;
+				case MGS_NETCONS:
+					ip->udp_src = (ushort)
+						cachedNumbers[NETCONS_PORT];
+					/*
+					 * in drivers/net/netconsole.c src port
+					 * equals dest port
+					 */
+					ip->udp_dst = ip->udp_src;
+					ip->udp_len = ip->ip_len -
+						IP_HDR_SIZE_NO_UDP;
+					ip->udp_xsum = 0;
+					break;
+				}
+				/* ip version */
+				ip->ip_hl_v = (0x40) | (0x0f &
+					(IP_HDR_SIZE_NO_UDP / 4));
+				ip->ip_tos = 0;
+				ip->ip_id = 0;
+				/* flags, fragment offset */
+				ip->ip_off = htons(0x4000);
+				ip->ip_ttl = 255; /* time to live */
+				/* have to fixup the checksum */
+				ip->ip_sum = ~NetCksum((uchar *)ip,
+					IP_HDR_SIZE_NO_UDP / 2);
+				/*
+				 * Pass the packet up to the protocol layers
+				 * but remove dest_addr, src_addr, application
+				 * and the CRC.
+				 */
+#ifdef TEST_RX
+				hexdump((unsigned char *)fp->data,
+					INET_HDR_SIZE + 4);
+#endif
+				NetReceive(fp->data, length - REMOVE);
+			} else {
+				/*
+				 * the other application types are not yet
+				 * supported by u-boot.
+				 */
+				/* normally drop it */
+#ifdef TEST_NO
+				/* send it anyway */
+				fp = (struct icn_frame *)
+					(MyRxPackets[keymile_rxIdx] +
+						INET_HDR_ALIGN);
+				NetReceive(fp->data, length - REMOVE);
+#endif
+			}
+		}
+
+		/* Give the buffer back to the SCC. */
+		rtx->rxbd[keymile_rxIdx].cbd_datlen = 0;
+
+		/* wrap around buffer index when necessary */
+		if ((keymile_rxIdx + 1) >= HDLC_PKTBUFSRX) {
+			rtx->rxbd[HDLC_PKTBUFSRX - 1].cbd_sc =
+				(BD_SC_WRAP | BD_SC_EMPTY);
+			keymile_rxIdx = 0;
+		} else {
+			rtx->rxbd[keymile_rxIdx].cbd_sc = BD_SC_EMPTY;
+			keymile_rxIdx++;
+		}
+	}
+	return length;
+}
+
+#ifdef TEST_IT
+/* simple send test routine */
+int hdlc_enet_stest(struct cmd_tbl_s *a, int b, int c, char **d)
+{
+	unsigned char pkt[2];
+	int ret;
+
+	dprintf("enter stest\n");
+	/* may have to initialize things */
+	if (seth->state != ETH_STATE_ACTIVE) {
+		/* the bd_t* is not used */
+		if (seth->init(seth, NULL) >= 0)
+			seth->state = ETH_STATE_ACTIVE;
+	}
+	pkt[0] = 0xea;
+	pkt[1] = 0xae;
+	ret = keymile_hdlc_enet_send(seth, pkt, 2);
+	dprintf("return from send %x\n", ret);
+	dprintf("exit stest\n");
+	return ret;
+}
+U_BOOT_CMD(
+	stest, 1, 1, hdlc_enet_stest,
+	"stest	- simple send test for hdlc_enet\n",
+	"no arguments\n"
+);
+/* simple receive test routine */
+int hdlc_enet_rtest(struct cmd_tbl_s *a, int b, int c, char **d)
+{
+	int ret;
+
+	dprintf("enter rtest\n");
+	/* may have to initialize things */
+	if (seth->state != ETH_STATE_ACTIVE) {
+		/* the bd_t* is not used */
+		if (seth->init(seth, NULL) >= 0)
+			seth->state = ETH_STATE_ACTIVE;
+	}
+	ret = keymile_hdlc_enet_recv(seth);
+	dprintf("return from recv %x\n", ret);
+	dprintf("exit rtest\n");
+	return ret;
+}
+U_BOOT_CMD(
+	rtest, 1, 1, hdlc_enet_rtest,
+	"rtest	- simple receive test for hdlc_enet\n",
+	"no arguments\n"
+);
+#endif
+
+#endif /* CONFIG_KEYMILE_HDLC_ENET */
diff --git a/board/keymile/common/keymile_hdlc_enet.h b/board/keymile/common/keymile_hdlc_enet.h
new file mode 100644
index 000000000..965bd5a4b
--- /dev/null
+++ b/board/keymile/common/keymile_hdlc_enet.h
@@ -0,0 +1,129 @@
+/*
+ * (C) Copyright 2008
+ * Gary Jennejohn, DENX Software Engineering GmbH, garyj@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef _KEYMILE_HDLC_ENET_H_
+#define _KEYMILE_HDLC_ENET_H_
+
+/* Unfortuantely, we have do this to get the flag defines in the cbd_t */
+#ifdef CONFIG_MGSUVD
+#include <commproc.h>
+#endif
+#ifdef CONFIG_MGCOGE
+#include <mpc8260.h>
+#include <asm/cpm_8260.h>
+#endif
+
+/*
+ * Defines for the ICN protocol used for communication over HDLC
+ * on the backplane between MGSUVDs and MGCOGEs.
+ */
+
+/*
+ * MAC which is reserved for communication (0x00 - 0xff in the last byte,
+ * which is the slot number)
+ */
+
+/*
+ * A DLL frame looks like this:
+ *  8 bit  |  8 bit     |  8 bit |  8 bit     | n * 8 bit| 16 bit|  8 bit
+ *  opening| destination| source | application|  data    |  FCS  | closing
+ *   flag  |  address   | address|            |          |       |  flag
+ *  (HW)      (APP)       (APP)      (APP)       (APP)      (HW)   (HW)
+ */
+
+/*
+ * The opening flag, the FCS and the closing flag are set by the hardware so
+ * they are not reflected in this struct.
+ */
+struct icn_hdr {
+	unsigned char dest_addr;
+	unsigned char src_addr;
+	unsigned char application;
+} __attribute__((packed));
+
+#define ICNHDR_LEN	(sizeof(struct icn_hdr))
+#define CRC_LEN		(sizeof(short))
+/* bytes to remove from packet before sending it upstream */
+#define REMOVE		(ICNHDR_LEN + CRC_LEN)
+
+struct icn_frame {
+	struct icn_hdr hdr;
+	unsigned char data[0];	/* a place holder */
+} __attribute__((packed));
+
+/* Address field */
+#define HDLC_UUA	0x00 /* Unicast Unit Address */
+#define HDLC_UUA_MASK	0x3f /* the last 6 bits contain the slot number */
+#define SET_HDLC_UUA(x) ((HDLC_UUA | ((x) & HDLC_UUA_MASK)))
+#define HDLC_UACUA	0x7f /* Unicast Active Control Unit Address */
+#define HDLC_BCAST	0xff /* broadcast */
+
+/* Application field */
+#define MGS_UUSP	0x00
+#define MGS_UREP	0x01
+#define MGS_IUP		0x02
+#define MGS_UTA		0x03
+#define MGS_MDS		0x04
+#define MGS_ITIME	0x05
+/* added by DENX */
+#define MGS_NETCONS	0x06	/* netconsole */
+#define MGS_TFTP	0x07
+
+/* Useful defines for buffer sizes, etc. */
+#define HDLC_PKTBUFSRX		32
+#define MAX_FRAME_LENGTH	1500 /* ethernet frame size */
+			 /*   14        +    28     */
+#define INET_HDR_SIZE	(ETHER_HDR_SIZE + IP_HDR_SIZE)
+#define INET_HDR_ALIGN	(((INET_HDR_SIZE + PKTALIGN - 1) / PKTALIGN) * PKTALIGN)
+/* INET_HDR_SIZE is stripped off */
+#define PKT_MAXBLR_SIZE	(MAX_FRAME_LENGTH + INET_HDR_ALIGN)
+
+/*
+ * It is too slow to read always the port numbers and IP addresses from the
+ * string variables.
+ * cachedNumbers is meant to cache it.
+ * THIS IS ONLY A SPEED IMPROVEMENT!
+ */
+enum {
+	IP_ADDR = 0,	/* getenv_IPaddr("serverip"); */
+	IP_SERVER,	/* getenv_IPaddr("ipaddr"); */
+	TFTP_SRC_PORT,	/* simple_strtol(getenv("tftpsrcp"), NULL, 10); */
+	TFTP_DST_PORT,	/* simple_strtol(getenv("tftpdstp"), NULL, 10); */
+	NETCONS_PORT,	/* simple_strtol(getenv("ncip"), NULL, 10); */
+	CACHEDNUMBERS
+};
+
+#define WELL_KNOWN_PORT 69	/* Well known TFTP port # */
+
+/* define this to create a test commend (htest) */
+#undef TEST_IT
+#ifdef TEST_IT
+/* have to save a copy of the eth_device for the test command's use */
+struct eth_device *seth;
+#endif
+/* define this for outputting of received packets */
+#undef TEST_RX
+/* define this for outputting of packets being sent */
+#undef TEST_TX
+
+#endif /* _KEYMILE_HDLC_ENET_H_ */
diff --git a/board/mgcoge/Makefile b/board/keymile/mgcoge/Makefile
index d4087ccbb..2774a702b 100644
--- a/board/mgcoge/Makefile
+++ b/board/keymile/mgcoge/Makefile
@@ -22,10 +22,14 @@
 #
 
 include $(TOPDIR)/config.mk
+ifneq ($(OBJTREE),$(SRCTREE))
+$(shell mkdir -p $(obj)../common)
+endif
 
 LIB	= $(obj)lib$(BOARD).a
 
-COBJS	:= $(BOARD).o
+COBJS	:= $(BOARD).o ../common/common.o ../common/keymile_hdlc_enet.o \
+		mgcoge_hdlc_enet.o
 
 SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
 OBJS	:= $(addprefix $(obj),$(COBJS))
diff --git a/board/mgcoge/config.mk b/board/keymile/mgcoge/config.mk
index 143bc9f76..143bc9f76 100644
--- a/board/mgcoge/config.mk
+++ b/board/keymile/mgcoge/config.mk
diff --git a/board/keymile/mgcoge/mgcoge.c b/board/keymile/mgcoge/mgcoge.c
new file mode 100644
index 000000000..3683417f5
--- /dev/null
+++ b/board/keymile/mgcoge/mgcoge.c
@@ -0,0 +1,349 @@
+/*
+ * (C) Copyright 2007 - 2008
+ * Heiko Schocher, DENX Software Engineering, hs@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <mpc8260.h>
+#include <ioports.h>
+#include <malloc.h>
+#include <asm/io.h>
+
+#if defined(CONFIG_OF_BOARD_SETUP) && defined(CONFIG_OF_LIBFDT)
+#include <libfdt.h>
+#endif
+
+#if defined(CONFIG_HARD_I2C) || defined(CONFIG_SOFT_I2C)
+#include <i2c.h>
+#endif
+
+extern int ivm_read_eeprom (void);
+/*
+ * I/O Port configuration table
+ *
+ * if conf is 1, then that port pin will be configured at boot time
+ * according to the five values podr/pdir/ppar/psor/pdat for that entry
+ */
+const iop_conf_t iop_conf_tab[4][32] = {
+
+    /* Port A */
+    {	/*	      conf	ppar psor pdir podr pdat */
+	/* PA31 */ { 0,		 0,   0,   0,	0,   0 }, /* PA31	     */
+	/* PA30 */ { 0,		 0,   0,   0,	0,   0 }, /* PA30	     */
+	/* PA29 */ { 0,		 0,   0,   0,	0,   0 }, /* PA29	     */
+	/* PA28 */ { 0,		 0,   0,   0,	0,   0 }, /* PA28	     */
+	/* PA27 */ { 0,		 0,   0,   0,	0,   0 }, /* PA27	     */
+	/* PA26 */ { 0,		 0,   0,   0,	0,   0 }, /* PA26	     */
+	/* PA25 */ { 0,		 0,   0,   0,	0,   0 }, /* PA25	     */
+	/* PA24 */ { 0,		 0,   0,   0,	0,   0 }, /* PA24	     */
+	/* PA23 */ { 0,		 0,   0,   0,	0,   0 }, /* PA23	     */
+	/* PA22 */ { 0,		 0,   0,   0,	0,   0 }, /* PA22	     */
+	/* PA21 */ { 0,		 0,   0,   0,	0,   0 }, /* PA21	     */
+	/* PA20 */ { 0,		 0,   0,   0,	0,   0 }, /* PA20	     */
+	/* PA19 */ { 0,		 0,   0,   0,	0,   0 }, /* PA19	     */
+	/* PA18 */ { 0,		 0,   0,   0,	0,   0 }, /* PA18	     */
+	/* PA17 */ { 0,		 0,   0,   0,	0,   0 }, /* PA17	     */
+	/* PA16 */ { 0,		 0,   0,   0,	0,   0 }, /* PA16	     */
+	/* PA15 */ { 0,		 0,   0,   0,	0,   0 }, /* PA15	     */
+	/* PA14 */ { 0,		 0,   0,   0,	0,   0 }, /* PA14	     */
+	/* PA13 */ { 0,		 0,   0,   0,	0,   0 }, /* PA13	     */
+	/* PA12 */ { 0,		 0,   0,   0,	0,   0 }, /* PA12	     */
+	/* PA11 */ { 0,		 0,   0,   0,	0,   0 }, /* PA11	     */
+	/* PA10 */ { 0,		 0,   0,   0,	0,   0 }, /* PA10	     */
+	/* PA9	*/ { 1,		 1,   0,   1,	0,   0 }, /* SMC2 TxD	     */
+	/* PA8	*/ { 1,		 1,   0,   0,	0,   0 }, /* SMC2 RxD	     */
+	/* PA7	*/ { 0,		 0,   0,   0,	0,   0 }, /* PA7	     */
+	/* PA6	*/ { 0,		 0,   0,   0,	0,   0 }, /* PA6	     */
+	/* PA5	*/ { 0,		 0,   0,   0,	0,   0 }, /* PA5	     */
+	/* PA4	*/ { 0,		 0,   0,   0,	0,   0 }, /* PA4	     */
+	/* PA3	*/ { 0,		 0,   0,   0,	0,   0 }, /* PA3	     */
+	/* PA2	*/ { 0,		 0,   0,   0,	0,   0 }, /* PA2	     */
+	/* PA1	*/ { 0,		 0,   0,   0,	0,   0 }, /* PA1	     */
+	/* PA0	*/ { 0,		 0,   0,   0,	0,   0 }  /* PA0	     */
+    },
+
+    /* Port B */
+    {	/*	      conf	ppar psor pdir podr pdat */
+	/* PB31 */ { 0,		 0,   0,   0,	0,   0 }, /* PB31	     */
+	/* PB30 */ { 0,		 0,   0,   0,	0,   0 }, /* PB30	     */
+	/* PB29 */ { 0,		 0,   0,   0,	0,   0 }, /* PB29	     */
+	/* PB28 */ { 0,		 0,   0,   0,	0,   0 }, /* PB28	     */
+	/* PB27 */ { 0,		 0,   0,   0,	0,   0 }, /* PB27	     */
+	/* PB26 */ { 0,		 0,   0,   0,	0,   0 }, /* PB26	     */
+	/* PB25 */ { 0,		 0,   0,   0,	0,   0 }, /* PB25	     */
+	/* PB24 */ { 0,		 0,   0,   0,	0,   0 }, /* PB24	     */
+	/* PB23 */ { 0,		 0,   0,   0,	0,   0 }, /* PB23	     */
+	/* PB22 */ { 0,		 0,   0,   0,	0,   0 }, /* PB22	     */
+	/* PB21 */ { 0,		 0,   0,   0,	0,   0 }, /* PB21	     */
+	/* PB20 */ { 0,		 0,   0,   0,	0,   0 }, /* PB20	     */
+	/* PB19 */ { 0,		 0,   0,   0,	0,   0 }, /* PB19	     */
+	/* PB18 */ { 0,		 0,   0,   0,	0,   0 }, /* PB18	     */
+	/* PB17 */ { 0,		 0,   0,   0,	0,   0 }, /* non-existent    */
+	/* PB16 */ { 0,		 0,   0,   0,	0,   0 }, /* non-existent    */
+	/* PB15 */ { 0,		 0,   0,   0,	0,   0 }, /* non-existent    */
+	/* PB14 */ { 0,		 0,   0,   0,	0,   0 }, /* non-existent    */
+	/* PB13 */ { 0,		 0,   0,   0,	0,   0 }, /* non-existent    */
+	/* PB12 */ { 0,		 0,   0,   0,	0,   0 }, /* non-existent    */
+	/* PB11 */ { 0,		 0,   0,   0,	0,   0 }, /* non-existent    */
+	/* PB10 */ { 0,		 0,   0,   0,	0,   0 }, /* non-existent    */
+	/* PB9	*/ { 0,		 0,   0,   0,	0,   0 }, /* non-existent    */
+	/* PB8	*/ { 0,		 0,   0,   0,	0,   0 }, /* non-existent    */
+	/* PB7	*/ { 0,		 0,   0,   0,	0,   0 }, /* non-existent    */
+	/* PB6	*/ { 0,		 0,   0,   0,	0,   0 }, /* non-existent    */
+	/* PB5	*/ { 0,		 0,   0,   0,	0,   0 }, /* non-existent    */
+	/* PB4	*/ { 0,		 0,   0,   0,	0,   0 }, /* non-existent    */
+	/* PB3	*/ { 0,		 0,   0,   0,	0,   0 }, /* non-existent    */
+	/* PB2	*/ { 0,		 0,   0,   0,	0,   0 }, /* non-existent    */
+	/* PB1	*/ { 0,		 0,   0,   0,	0,   0 }, /* non-existent    */
+	/* PB0	*/ { 0,		 0,   0,   0,	0,   0 }  /* non-existent    */
+    },
+
+    /* Port C */
+    {	/*	      conf	ppar psor pdir podr pdat */
+	/* PC31 */ { 0,		 0,   0,   0,	0,   0 }, /* PC31	     */
+	/* PC30 */ { 0,		 0,   0,   0,	0,   0 }, /* PC30	     */
+	/* PC29 */ { 0,		 0,   0,   0,	0,   0 }, /* PC29	     */
+	/* PC28 */ { 0,		 0,   0,   0,	0,   0 }, /* PC28	     */
+	/* PC27 */ { 0,		 0,   0,   0,	0,   0 }, /* PC27	     */
+	/* PC26 */ { 0,		 0,   0,   0,	0,   0 }, /* PC26	     */
+	/* PC25 */ { 1,		 1,   0,   0,	0,   0 }, /* SCC4 RxClk      */
+	/* PC24 */ { 1,		 1,   0,   0,	0,   0 }, /* SCC4 TxClk      */
+	/* PC23 */ { 0,		 0,   0,   0,	0,   0 }, /* PC23	     */
+	/* PC22 */ { 0,		 0,   0,   0,	0,   0 }, /* PC22	     */
+	/* PC21 */ { 0,		 0,   0,   0,	0,   0 }, /* PC21	     */
+	/* PC20 */ { 0,		 0,   0,   0,	0,   0 }, /* PC20	     */
+	/* PC19 */ { 0,		 0,   0,   0,	0,   0 }, /* PC19	     */
+	/* PC18 */ { 0,		 0,   0,   0,	0,   0 }, /* PC18	     */
+	/* PC17 */ { 0,		 0,   0,   0,	0,   0 }, /* PC17	     */
+	/* PC16 */ { 0,		 0,   0,   0,	0,   0 }, /* PC16	     */
+	/* PC15 */ { 0,		 0,   0,   0,	0,   0 }, /* PC15	     */
+	/* PC14 */ { 0,		 0,   0,   0,	0,   0 }, /* PC14	     */
+	/* PC13 */ { 0,		 0,   0,   0,	0,   0 }, /* PC13	     */
+	/* PC12 */ { 0,		 0,   0,   0,	0,   0 }, /* PC12	     */
+	/* PC11 */ { 0,		 0,   0,   0,	0,   0 }, /* PC11	     */
+	/* PC10 */ { 0,		 0,   0,   0,	0,   0 }, /* PC10	     */
+	/* PC9	*/ { 1,		 1,   0,   0,	0,   0 }, /* SCC4: CTS	     */
+	/* PC8	*/ { 1,		 1,   0,   0,	0,   0 }, /* SCC4: CD	     */
+	/* PC7	*/ { 0,		 0,   0,   0,	0,   0 }, /* PC7	     */
+	/* PC6	*/ { 0,		 0,   0,   0,	0,   0 }, /* PC6	     */
+	/* PC5	*/ { 0,		 0,   0,   0,	0,   0 }, /* PC5	     */
+	/* PC4	*/ { 0,		 0,   0,   0,	0,   0 }, /* PC4	     */
+	/* PC3	*/ { 0,		 0,   0,   0,	0,   0 }, /* PC3	     */
+	/* PC2	*/ { 0,		 0,   0,   0,	0,   0 }, /* PC2	     */
+	/* PC1	*/ { 0,		 0,   0,   0,	0,   0 }, /* PC1	     */
+	/* PC0	*/ { 0,		 0,   0,   0,	0,   0 }, /* PC0	     */
+    },
+
+    /* Port D */
+    {	/*	      conf	ppar psor pdir podr pdat */
+	/* PD31 */ { 0,		 0,   0,   0,	0,   0 }, /* PD31	     */
+	/* PD30 */ { 0,		 0,   0,   0,	0,   0 }, /* PD30	     */
+	/* PD29 */ { 0,		 0,   0,   0,	0,   0 }, /* PD29	     */
+	/* PD28 */ { 0,		 0,   0,   0,	0,   0 }, /* PD28	     */
+	/* PD27 */ { 0,		 0,   0,   0,	0,   0 }, /* PD27	     */
+	/* PD26 */ { 0,		 0,   0,   0,	0,   0 }, /* PD26	     */
+	/* PD25 */ { 0,		 0,   0,   0,	0,   0 }, /* PD25	     */
+	/* PD24 */ { 0,		 0,   0,   0,	0,   0 }, /* PD24	     */
+	/* PD23 */ { 0,		 0,   0,   0,	0,   0 }, /* PD23	     */
+	/* PD22 */ { 1,		 1,   0,   0,	0,   0 }, /* SCC4: RXD	     */
+	/* PD21 */ { 1,		 1,   0,   1,	0,   0 }, /* SCC4: TXD	     */
+	/* PD20 */ { 1,		 1,   0,   1,	0,   0 }, /* SCC4: RTS	     */
+	/* PD19 */ { 0,		 0,   0,   0,	0,   0 }, /* PD19	     */
+	/* PD18 */ { 0,		 0,   0,   0,	0,   0 }, /* PD18	     */
+	/* PD17 */ { 0,		 0,   0,   0,	0,   0 }, /* PD17	     */
+	/* PD16 */ { 0,		 0,   0,   0,	0,   0 }, /* PD16	     */
+#if defined(CONFIG_HARD_I2C)
+	/* PD15 */ { 1,		 1,   1,   0,	1,   0 }, /* I2C SDA	     */
+	/* PD14 */ { 1,		 1,   1,   0,	1,   0 }, /* I2C SCL	     */
+#else
+	/* PD15 */ { 1,		 0,   0,   0,	1,   1 }, /* PD15	     */
+	/* PD14 */ { 1,		 0,   0,   1,	1,   1 }, /* PD14	     */
+#endif
+	/* PD13 */ { 0,		 0,   0,   0,	0,   0 }, /* PD13	     */
+	/* PD12 */ { 0,		 0,   0,   0,	0,   0 }, /* PD12	     */
+	/* PD11 */ { 0,		 0,   0,   0,	0,   0 }, /* PD11	     */
+	/* PD10 */ { 0,		 0,   0,   0,	0,   0 }, /* PD10	     */
+	/* PD9	*/ { 0,		 0,   0,   0,	0,   0 }, /* PD9	     */
+	/* PD8	*/ { 0,		 0,   0,   0,	0,   0 }, /* PD8	     */
+	/* PD7	*/ { 0,		 0,   0,   0,	0,   0 }, /* PD7	     */
+	/* PD6	*/ { 0,		 0,   0,   0,	0,   0 }, /* PD6	     */
+	/* PD5	*/ { 0,		 0,   0,   0,	0,   0 }, /* PD5	     */
+	/* PD4	*/ { 0,		 0,   0,   0,	0,   0 }, /* PD4	     */
+	/* PD3	*/ { 0,		 0,   0,   0,	0,   0 }, /* non-existent    */
+	/* PD2	*/ { 0,		 0,   0,   0,	0,   0 }, /* non-existent    */
+	/* PD1	*/ { 0,		 0,   0,   0,	0,   0 }, /* non-existent    */
+	/* PD0	*/ { 0,		 0,   0,   0,	0,   0 }  /* non-existent    */
+    }
+};
+
+/* Try SDRAM initialization with P/LSDMR=sdmr and ORx=orx
+ *
+ * This routine performs standard 8260 initialization sequence
+ * and calculates the available memory size. It may be called
+ * several times to try different SDRAM configurations on both
+ * 60x and local buses.
+ */
+static long int try_init (volatile memctl8260_t * memctl, ulong sdmr,
+						  ulong orx, volatile uchar * base)
+{
+	volatile uchar c = 0xff;
+	volatile uint *sdmr_ptr;
+	volatile uint *orx_ptr;
+	ulong maxsize, size;
+	int i;
+
+	/* We must be able to test a location outsize the maximum legal size
+	 * to find out THAT we are outside; but this address still has to be
+	 * mapped by the controller. That means, that the initial mapping has
+	 * to be (at least) twice as large as the maximum expected size.
+	 */
+	maxsize = (1 + (~orx | 0x7fff))/* / 2*/;
+
+	sdmr_ptr = &memctl->memc_psdmr;
+	orx_ptr = &memctl->memc_or1;
+
+	*orx_ptr = orx;
+
+	/*
+	 * Quote from 8260 UM (10.4.2 SDRAM Power-On Initialization, 10-35):
+	 *
+	 * "At system reset, initialization software must set up the
+	 *  programmable parameters in the memory controller banks registers
+	 *  (ORx, BRx, P/LSDMR). After all memory parameters are configured,
+	 *  system software should execute the following initialization sequence
+	 *  for each SDRAM device.
+	 *
+	 *  1. Issue a PRECHARGE-ALL-BANKS command
+	 *  2. Issue eight CBR REFRESH commands
+	 *  3. Issue a MODE-SET command to initialize the mode register
+	 *
+	 *  The initial commands are executed by setting P/LSDMR[OP] and
+	 *  accessing the SDRAM with a single-byte transaction."
+	 *
+	 * The appropriate BRx/ORx registers have already been set when we
+	 * get here. The SDRAM can be accessed at the address CONFIG_SYS_SDRAM_BASE.
+	 */
+
+	*sdmr_ptr = sdmr | PSDMR_OP_PREA;
+	*base = c;
+
+	*sdmr_ptr = sdmr | PSDMR_OP_CBRR;
+	for (i = 0; i < 8; i++)
+		*base = c;
+
+	*sdmr_ptr = sdmr | PSDMR_OP_MRW;
+	*(base + CONFIG_SYS_MRS_OFFS) = c;	/* setting MR on address lines */
+
+	*sdmr_ptr = sdmr | PSDMR_OP_NORM | PSDMR_RFEN;
+	*base = c;
+
+	size = get_ram_size ((long *)base, maxsize);
+	*orx_ptr = orx | ~(size - 1);
+
+	return (size);
+}
+
+phys_size_t initdram (int board_type)
+{
+	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
+	volatile memctl8260_t *memctl = &immap->im_memctl;
+
+	long psize;
+
+	memctl->memc_psrt = CONFIG_SYS_PSRT;
+	memctl->memc_mptpr = CONFIG_SYS_MPTPR;
+
+#ifndef CONFIG_SYS_RAMBOOT
+	/* 60x SDRAM setup:
+	 */
+	psize = try_init (memctl, CONFIG_SYS_PSDMR, CONFIG_SYS_OR1,
+						  (uchar *) CONFIG_SYS_SDRAM_BASE);
+#endif /* CONFIG_SYS_RAMBOOT */
+
+	icache_enable ();
+
+	return (psize);
+}
+
+int checkboard(void)
+{
+	puts ("Board: mgcoge\n");
+
+	return 0;
+}
+
+/*
+ * Early board initalization.
+ */
+int board_early_init_r (void)
+{
+	/* setup the UPIOx */
+	out_8((u8 *)(CONFIG_SYS_PIGGY_BASE + 0x02), 0xc0);
+	out_8((u8 *)(CONFIG_SYS_PIGGY_BASE + 0x03), 0x15);
+	return 0;
+}
+
+int hush_init_var (void)
+{
+	ivm_read_eeprom ();
+	return 0;
+}
+
+#if defined(CONFIG_OF_BOARD_SETUP) && defined(CONFIG_OF_LIBFDT)
+extern int fdt_set_node_and_value (void *blob,
+				char *nodename,
+				char *regname,
+				void *var,
+				int size);
+
+/*
+ * update "memory" property in the blob
+ */
+void ft_blob_update (void *blob, bd_t *bd)
+{
+	ulong memory_data[2] = {0};
+	ulong flash_data[8] = {0};
+
+	memory_data[0] = cpu_to_be32 (bd->bi_memstart);
+	memory_data[1] = cpu_to_be32 (bd->bi_memsize);
+	fdt_set_node_and_value (blob, "/memory", "reg", memory_data,
+				sizeof (memory_data));
+
+	/* update Flash addr, size */
+	flash_data[2] = cpu_to_be32 (CONFIG_SYS_FLASH_BASE);
+	flash_data[3] = cpu_to_be32 (CONFIG_SYS_FLASH_SIZE);
+	flash_data[4] = cpu_to_be32 (5);
+	flash_data[5] = cpu_to_be32 (0);
+	flash_data[6] = cpu_to_be32 (CONFIG_SYS_FLASH_BASE_1);
+	flash_data[7] = cpu_to_be32 (CONFIG_SYS_FLASH_SIZE_1);
+	fdt_set_node_and_value (blob, "/localbus", "ranges", flash_data,
+				sizeof (flash_data));
+	/* MAC addr */
+	fdt_set_node_and_value (blob, "/soc/cpm/ethernet", "mac-address",
+				bd->bi_enetaddr, sizeof (u8) * 6);
+}
+
+void ft_board_setup (void *blob, bd_t *bd)
+{
+	ft_cpu_setup (blob, bd);
+	ft_blob_update (blob, bd);
+}
+#endif /* defined(CONFIG_OF_BOARD_SETUP) && defined(CONFIG_OF_LIBFDT) */
diff --git a/board/keymile/mgcoge/mgcoge_hdlc_enet.c b/board/keymile/mgcoge/mgcoge_hdlc_enet.c
new file mode 100644
index 000000000..34f04f562
--- /dev/null
+++ b/board/keymile/mgcoge/mgcoge_hdlc_enet.c
@@ -0,0 +1,276 @@
+/*
+ * (C) Copyright 2008
+ * Gary Jennejohn, DENX Software Engineering GmbH, garyj@denx.de.
+ *
+ * Based in part on cpu/mpc8260/ether_scc.c.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <malloc.h>
+#include <net.h>
+
+#ifdef CONFIG_KEYMILE_HDLC_ENET
+
+#include "../common/keymile_hdlc_enet.h"
+
+char keymile_slot;	/* our slot number in the backplane */
+
+/*
+ * Since, except during initialization, ethact is always HDLC ETHERNET
+ * while we're in the driver, just use serial_printf() everywhere for
+ * output.  This avoids possible conflicts when netconsole is being
+ * used.
+ */
+#define dprintf(fmt, args...)	serial_printf(fmt, ##args)
+
+static int already_inited;
+
+/*
+  * SCC Ethernet Tx and Rx buffer descriptors allocated at the
+  *  immr->udata_bd address on Dual-Port RAM
+  * Provide for Double Buffering
+  */
+typedef volatile struct CommonBufferDescriptor {
+    cbd_t txbd;			/* Tx BD */
+    cbd_t rxbd[HDLC_PKTBUFSRX];	/* Rx BD */
+} RTXBD;
+
+static RTXBD *rtx;
+
+int keymile_hdlc_enet_init(struct eth_device *, bd_t *);
+void keymile_hdlc_enet_halt(struct eth_device *);
+extern void keymile_hdlc_enet_init_bds(RTXBD *);
+extern void initCachedNumbers(int);
+
+/* Use SCC1 */
+#define CPM_CR_SCC_PAGE		CPM_CR_SCC1_PAGE
+#define CPM_CR_SCC_SBLOCK	CPM_CR_SCC1_SBLOCK
+#define CMXSCR_MASK		(CMXSCR_GR1|CMXSCR_SC1|\
+					CMXSCR_RS1CS_MSK|CMXSCR_TS1CS_MSK)
+#define CMXSCR_VALUE		(CMXSCR_RS1CS_CLK11|CMXSCR_TS1CS_CLK11)
+#define MGC_PROFF_HDLC	PROFF_SCC1
+#define MGC_SCC_HDLC	0	/* Index, not number! */
+
+int keymile_hdlc_enet_init(struct eth_device *dev, bd_t *bis)
+{
+	/* int i; */
+	uint dpr;
+	/* volatile cbd_t *bdp; */
+	volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
+	volatile cpm8260_t *cp = &(im->im_cpm);
+	volatile scc_t *sccp;
+	volatile scc_hdlc_t *hpr;
+	volatile iop8260_t *iop;
+
+	if (already_inited)
+		return 0;
+
+	hpr = (scc_hdlc_t *)(&im->im_dprambase[MGC_PROFF_HDLC]);
+	sccp = (scc_t *)(&im->im_scc[MGC_SCC_HDLC]);
+	iop = &im->im_ioport;
+
+	/*
+	 * Disable receive and transmit just in case.
+	 */
+	sccp->scc_gsmrl &= ~(SCC_GSMRL_ENR | SCC_GSMRL_ENT);
+
+	/*
+	 * Avoid exhausting DPRAM, which would cause a panic.
+	 */
+	if (rtx == NULL) {
+		/* dpr is an offset into dpram */
+		dpr = m8260_cpm_dpalloc(sizeof(RTXBD), 8);
+		rtx = (RTXBD *)&im->im_dprambase[dpr];
+	}
+
+	/* We need the slot number for addressing. */
+	keymile_slot = *(char *)(CONFIG_SYS_SLOT_ID_BASE +
+		CONFIG_SYS_SLOT_ID_OFF) & CONFIG_SYS_SLOT_ID_MASK;
+	/*
+	 * Be consistent with the Linux driver and set
+	 * only enetaddr[0].
+	 *
+	 * Always add 1 to the slot number so that
+	 * there are no problems with an ethaddr which
+	 * is all 0s.  This should be acceptable because
+	 * a board should never have a slot number of 255,
+	 * which is the broadcast address.  The HDLC addressing
+	 * uses only the slot number.
+	 */
+	dev->enetaddr[0] = keymile_slot + 1;
+#ifdef TEST_IT
+	dprintf("slot %d\n", keymile_slot);
+#endif
+
+	/* use pd30, pd31 pins for TXD1, RXD1 respectively */
+	iop->iop_ppard |= (0x80000000 >> 30) | (0x80000000 >> 31);
+	iop->iop_pdird |= (0x80000000 >> 30);
+	iop->iop_psord |= (0x80000000 >> 30);
+
+	/* use pc21 as CLK11 */
+	iop->iop_pparc |= (0x80000000 >> 21);
+	iop->iop_pdirc &= ~(0x80000000 >> 21);
+	iop->iop_psorc &= ~(0x80000000 >> 21);
+
+	/* use pc15 as CTS1 */
+	iop->iop_pparc |= (0x80000000 >> 15);
+	iop->iop_pdirc &= ~(0x80000000 >> 15);
+	iop->iop_psorc &= ~(0x80000000 >> 15);
+
+	/*
+	 * SI clock routing
+	 * use CLK11
+	 * this also connects SCC1 to NMSI
+	 */
+	im->im_cpmux.cmx_scr = (im->im_cpmux.cmx_scr & ~CMXSCR_MASK) |
+		CMXSCR_VALUE;
+
+	/* keymile_rxIdx = 0; */
+
+	/*
+	 * Initialize function code registers for big-endian.
+	 */
+	hpr->sh_genscc.scc_rfcr = CPMFCR_EB;
+	hpr->sh_genscc.scc_tfcr = CPMFCR_EB;
+
+	/*
+	 * Set maximum bytes per receive buffer.
+	 */
+	hpr->sh_genscc.scc_mrblr = MAX_FRAME_LENGTH;
+
+	/* Setup CRC generator values for HDLC */
+	hpr->sh_cmask = 0x0000F0B8;
+	hpr->sh_cpres = 0x0000FFFF;
+
+	/* Initialize all error counters to 0 */
+	hpr->sh_disfc = 0;
+	hpr->sh_crcec = 0;
+	hpr->sh_abtsc = 0;
+	hpr->sh_nmarc = 0;
+	hpr->sh_retrc = 0;
+
+	/* Set maximum frame length size */
+	hpr->sh_mflr = MAX_FRAME_LENGTH;
+
+	/* set to 1 for per frame processing change later if needed */
+	hpr->sh_rfthr = 1;
+
+	hpr->sh_hmask = 0xff;
+
+	hpr->sh_haddr2 = SET_HDLC_UUA(keymile_slot);
+	hpr->sh_haddr3 = hpr->sh_haddr2;
+	hpr->sh_haddr4 = hpr->sh_haddr2;
+	/* broadcast */
+	hpr->sh_haddr1 = HDLC_BCAST;
+
+	hpr->sh_genscc.scc_rbase = (unsigned int) &rtx->rxbd[0];
+	hpr->sh_genscc.scc_tbase = (unsigned int) &rtx->txbd;
+
+#if 0
+	/*
+	 * Initialize the buffer descriptors.
+	 */
+	bdp = &rtx->txbd;
+	bdp->cbd_sc = 0;
+	bdp->cbd_bufaddr = 0;
+	bdp->cbd_sc = BD_SC_WRAP;
+
+	/*
+	 *	Setup RX packet buffers, aligned correctly.
+	 *	Borrowed from net/net.c.
+	 */
+	MyRxPackets[0] = &MyPktBuf[0] + (PKTALIGN - 1);
+	MyRxPackets[0] -= (ulong)MyRxPackets[0] % PKTALIGN;
+	for (i = 1; i < HDLC_PKTBUFSRX; i++)
+		MyRxPackets[i] = MyRxPackets[0] + i * PKT_MAXBLR_SIZE;
+
+	bdp = &rtx->rxbd[0];
+	for (i = 0; i < HDLC_PKTBUFSRX; i++) {
+		bdp->cbd_sc = BD_SC_EMPTY;
+		/* Leave space at the start for INET header. */
+		bdp->cbd_bufaddr = (unsigned int)(MyRxPackets[i] +
+			INET_HDR_ALIGN);
+		bdp++;
+	}
+	bdp--;
+	bdp->cbd_sc |= BD_SC_WRAP;
+#else
+	keymile_hdlc_enet_init_bds(rtx);
+#endif
+
+	/* Let's re-initialize the channel now.	 We have to do it later
+	 * than the manual describes because we have just now finished
+	 * the BD initialization.
+	 */
+	cp->cp_cpcr = mk_cr_cmd(CPM_CR_SCC_PAGE, CPM_CR_SCC_SBLOCK,
+					0, CPM_CR_INIT_TRX) | CPM_CR_FLG;
+	while (cp->cp_cpcr & CPM_CR_FLG);
+
+	sccp->scc_gsmrl = SCC_GSMRL_MODE_HDLC;
+	/* CTSS=1 */
+	sccp->scc_gsmrh = SCC_GSMRH_CTSS;
+	/* NOF=0, RTE=1, DRT=0, BUS=1 */
+	sccp->scc_psmr = ((0x8000 >> 6) | (0x8000 >> 10));
+
+/* loopback for local testing */
+#ifdef GJTEST
+	dprintf("LOOPBACK!\n");
+	sccp->scc_gsmrl |= SCC_GSMRL_DIAG_LOOP;
+#endif
+
+	/*
+	 * Disable all interrupts and clear all pending
+	 * events.
+	 */
+	sccp->scc_sccm = 0;
+	sccp->scc_scce = 0xffff;
+
+	/*
+	 * And last, enable the transmit and receive processing.
+	 */
+	sccp->scc_gsmrl |= (SCC_GSMRL_ENR | SCC_GSMRL_ENT);
+
+	dprintf("%s: HDLC ENET Version 0.3 on SCC%d\n", dev->name,
+		MGC_SCC_HDLC + 1);
+
+	/*
+	 * We may not get an ARP packet because ARP was already done on
+	 * a different interface, so initialize the cached values now.
+	 */
+	initCachedNumbers(1);
+
+	already_inited = 1;
+
+	return 0;
+}
+
+void keymile_hdlc_enet_halt(struct eth_device *dev)
+{
+#if 0 /* just return, but keep this for reference */
+	volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
+
+	/* maybe should do a graceful stop here? */
+	immr->im_scc[MGC_SCC_HDLC].scc_gsmrl &=
+		~(SCC_GSMRL_ENR | SCC_GSMRL_ENT);
+#endif
+}
+
+#endif /* CONFIG_MGCOGE_HDLC_ENET */
diff --git a/board/keymile/mgsuvd/Makefile b/board/keymile/mgsuvd/Makefile
new file mode 100644
index 000000000..2c5732d16
--- /dev/null
+++ b/board/keymile/mgsuvd/Makefile
@@ -0,0 +1,48 @@
+#
+# (C) Copyright 2007
+# Heiko Schocher, DENX Software Engineering, hs@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+ifneq ($(OBJTREE),$(SRCTREE))
+$(shell mkdir -p $(obj)../common)
+endif
+
+LIB	= $(obj)lib$(BOARD).a
+
+COBJS	= $(BOARD).o ../common/common.o ../common/keymile_hdlc_enet.o \
+		mgsuvd_hdlc_enet.o
+
+SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS	:= $(addprefix $(obj),$(COBJS))
+SOBJS	:= $(addprefix $(obj),$(SOBJS))
+
+$(LIB):	$(obj).depend $(OBJS)
+	$(AR) $(ARFLAGS) $@ $(OBJS)
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/mgsuvd/config.mk b/board/keymile/mgsuvd/config.mk
index 8625cea56..8625cea56 100644
--- a/board/mgsuvd/config.mk
+++ b/board/keymile/mgsuvd/config.mk
diff --git a/board/mgsuvd/mgsuvd.c b/board/keymile/mgsuvd/mgsuvd.c
index c51ea7e76..3726acf4a 100644
--- a/board/mgsuvd/mgsuvd.c
+++ b/board/keymile/mgsuvd/mgsuvd.c
@@ -20,18 +20,16 @@
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  * MA 02111-1307 USA
  */
-
-#if 0
-#define DEBUG
-#endif
-
 #include <common.h>
 #include <mpc8xx.h>
+#include <asm/io.h>
 
 #if defined(CONFIG_OF_BOARD_SETUP) && defined(CONFIG_OF_LIBFDT)
 #include <libfdt.h>
 #endif
 
+extern int ivm_read_eeprom (void);
+
 DECLARE_GLOBAL_DATA_PTR;
 
 const uint sdram_table[] =
@@ -68,7 +66,7 @@ int checkboard (void)
 
 phys_size_t initdram (int board_type)
 {
-	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
 	volatile memctl8xx_t *memctl = &immap->im_memctl;
 	long int size;
 
@@ -81,7 +79,7 @@ phys_size_t initdram (int board_type)
 	 * with two SDRAM banks or four cycles every 31.2 us with one
 	 * bank. It will be adjusted after memory sizing.
 	 */
-	memctl->memc_mptpr = CFG_MPTPR;
+	memctl->memc_mptpr = CONFIG_SYS_MPTPR;
 
 	/*
 	 * The following value is used as an address (i.e. opcode) for
@@ -96,17 +94,17 @@ phys_size_t initdram (int board_type)
 	 *       |  +----------- Operating Mode = Standard
 	 *       +-------------- Write Burst Mode = Programmed Burst Length
 	 */
-	memctl->memc_mar = CFG_MAR;
+	memctl->memc_mar = CONFIG_SYS_MAR;
 
 	/*
 	 * Map controller banks 1 to the SDRAM banks 1 at
 	 * preliminary addresses - these have to be modified after the
 	 * SDRAM size has been determined.
 	 */
-	memctl->memc_or1 = CFG_OR1_PRELIM;
-	memctl->memc_br1 = CFG_BR1_PRELIM;
+	memctl->memc_or1 = CONFIG_SYS_OR1_PRELIM;
+	memctl->memc_br1 = CONFIG_SYS_BR1_PRELIM;
 
-	memctl->memc_mbmr = CFG_MBMR & (~(MBMR_PTBE));	/* no refresh yet */
+	memctl->memc_mbmr = CONFIG_SYS_MBMR & (~(MBMR_PTBE));	/* no refresh yet */
 
 	udelay (200);
 
@@ -140,88 +138,67 @@ phys_size_t initdram (int board_type)
 int board_early_init_r(void)
 {
 	/* setup the UPIOx */
-	*(char *)(CFG_PIGGY_BASE + 0x02) = 0xc0;
-	*(char *)(CFG_PIGGY_BASE + 0x03) = 0x35;
+	out_8((u8 *)(CONFIG_SYS_PIGGY_BASE + 0x02), 0xc0);
+	out_8((u8 *)(CONFIG_SYS_PIGGY_BASE + 0x03), 0x35);
+	return 0;
+}
+
+int hush_init_var (void)
+{
+	ivm_read_eeprom ();
 	return 0;
 }
 
 #if defined(CONFIG_OF_BOARD_SETUP) && defined(CONFIG_OF_LIBFDT)
+extern int fdt_set_node_and_value (void *blob,
+				char *nodename,
+				char *regname,
+				void *var,
+				int size);
+
 /*
  * update "memory" property in the blob
  */
-void ft_blob_update(void *blob, bd_t *bd)
+void ft_blob_update (void *blob, bd_t *bd)
 {
-	int ret, nodeoffset = 0;
 	ulong brg_data[1] = {0};
 	ulong memory_data[2] = {0};
 	ulong flash_data[4] = {0};
 
-	memory_data[0] = cpu_to_be32(bd->bi_memstart);
-	memory_data[1] = cpu_to_be32(bd->bi_memsize);
-
-		nodeoffset = fdt_path_offset (blob, "/memory");
-		if (nodeoffset >= 0) {
-			ret = fdt_setprop(blob, nodeoffset, "reg", memory_data,
-						sizeof(memory_data));
-		if (ret < 0)
-			printf("ft_blob_update(): cannot set /memory/reg "
-				"property err:%s\n", fdt_strerror(ret));
-		}
-		else {
-			/* memory node is required in dts */
-			printf("ft_blob_update(): cannot find /memory node "
-			"err:%s\n", fdt_strerror(nodeoffset));
-	}
-
-	flash_data[2] = cpu_to_be32(bd->bi_flashstart);
-	flash_data[3] = cpu_to_be32(bd->bi_flashsize);
-	nodeoffset = fdt_path_offset (blob, "/localbus");
-	if (nodeoffset >= 0) {
-		ret = fdt_setprop(blob, nodeoffset, "ranges", flash_data,
-					sizeof(flash_data));
-	if (ret < 0)
-		printf("ft_blob_update(): cannot set /localbus/ranges "
-			"property err:%s\n", fdt_strerror(ret));
-	}
-	else {
-		/* memory node is required in dts */
-		printf("ft_blob_update(): cannot find /localbus node "
-		"err:%s\n", fdt_strerror(nodeoffset));
-	}
+	memory_data[0] = cpu_to_be32 (bd->bi_memstart);
+	memory_data[1] = cpu_to_be32 (bd->bi_memsize);
+	fdt_set_node_and_value (blob, "/memory", "reg", memory_data,
+				sizeof (memory_data));
+
+	flash_data[2] = cpu_to_be32 (bd->bi_flashstart);
+	flash_data[3] = cpu_to_be32 (bd->bi_flashsize);
+	fdt_set_node_and_value (blob, "/localbus", "ranges", flash_data,
+				sizeof (flash_data));
+
 	/* BRG */
-	brg_data[0] = cpu_to_be32(bd->bi_busfreq);
-	nodeoffset = fdt_path_offset (blob, "/soc/cpm");
-	if (nodeoffset >= 0) {
-		ret = fdt_setprop(blob, nodeoffset, "brg-frequency", brg_data,
-					sizeof(brg_data));
-	if (ret < 0)
-		printf("ft_blob_update(): cannot set /soc/cpm/brg-frequency "
-			"property err:%s\n", fdt_strerror(ret));
-	}
-	else {
-		/* memory node is required in dts */
-		printf("ft_blob_update(): cannot find /soc/cpm node "
-		"err:%s\n", fdt_strerror(nodeoffset));
-	}
-	/* MAC Adresse */
-	nodeoffset = fdt_path_offset (blob, "/soc/cpm/ethernet");
-	if (nodeoffset >= 0) {
-		ret = fdt_setprop(blob, nodeoffset, "mac-address", bd->bi_enetaddr,
-					sizeof(uchar) * 6);
-	if (ret < 0)
-		printf("ft_blob_update(): cannot set /soc/cpm/scc/mac-address "
-			"property err:%s\n", fdt_strerror(ret));
-	}
-	else {
-		/* memory node is required in dts */
-		printf("ft_blob_update(): cannot find /soc/cpm/ethernet node "
-		"err:%s\n", fdt_strerror(nodeoffset));
-	}
+	brg_data[0] = cpu_to_be32 (bd->bi_busfreq);
+	fdt_set_node_and_value (blob, "/soc/cpm", "brg-frequency", brg_data,
+				sizeof (brg_data));
+
+	/* MAC adr */
+	fdt_set_node_and_value (blob, "/soc/cpm/ethernet", "mac-address",
+				bd->bi_enetaddr, sizeof (u8) * 6);
 }
 
 void ft_board_setup(void *blob, bd_t *bd)
 {
-	ft_cpu_setup( blob, bd);
-	ft_blob_update(blob, bd);
+	ft_cpu_setup (blob, bd);
+	ft_blob_update (blob, bd);
 }
 #endif /* defined(CONFIG_OF_BOARD_SETUP) && defined(CONFIG_OF_LIBFDT) */
+
+int i2c_soft_read_pin (void)
+{
+	int val;
+
+	*(unsigned short *)(I2C_BASE_DIR) &=  ~SDA_CONF;
+	udelay(1);
+	val = *(unsigned char *)(I2C_BASE_PORT);
+
+	return ((val & SDA_BIT) == SDA_BIT);
+}
diff --git a/board/keymile/mgsuvd/mgsuvd_hdlc_enet.c b/board/keymile/mgsuvd/mgsuvd_hdlc_enet.c
new file mode 100644
index 000000000..9b93131f0
--- /dev/null
+++ b/board/keymile/mgsuvd/mgsuvd_hdlc_enet.c
@@ -0,0 +1,278 @@
+/*
+ * (C) Copyright 2008
+ * Gary Jennejohn, DENX Software Engineering GmbH, garyj@denx.de.
+ *
+ * Based in part on cpu/mpc8xx/scc.c.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>	/* commproc.h is included here */
+#include <malloc.h>
+#include <net.h>
+
+#ifdef CONFIG_KEYMILE_HDLC_ENET
+
+#include "../common/keymile_hdlc_enet.h"
+
+char keymile_slot;	/* our slot number in the backplane */
+
+/*
+ * Since, except during initialization, ethact is always HDLC ETHERNET
+ * while we're in the driver, just use serial_printf() everywhere for
+ * output.  This avoids possible conflicts when netconsole is being
+ * used.
+ */
+#define dprintf(fmt, args...)	serial_printf(fmt, ##args)
+
+static int already_inited;
+
+/*
+  * SCC Ethernet Tx and Rx buffer descriptors allocated at the
+  *  immr->udata_bd address on Dual-Port RAM
+  * Provide for Double Buffering
+  */
+typedef volatile struct CommonBufferDescriptor {
+    cbd_t txbd;			/* Tx BD */
+    cbd_t rxbd[HDLC_PKTBUFSRX];	/* Rx BD */
+} RTXBD;
+
+static RTXBD *rtx;
+
+int keymile_hdlc_enet_init(struct eth_device *, bd_t *);
+void keymile_hdlc_enet_halt(struct eth_device *);
+extern void keymile_hdlc_enet_init_bds(RTXBD *);
+extern void initCachedNumbers(int);
+
+/* Use SCC4 */
+#define MGS_CPM_CR_HDLC	CPM_CR_CH_SCC4
+#define MGS_PROFF_HDLC	PROFF_SCC4
+#define MGS_SCC_HDLC	3	/* Index, not number! */
+
+int keymile_hdlc_enet_init(struct eth_device *dev, bd_t *bis)
+{
+	/* int i; */
+	/* volatile cbd_t *bdp; */
+	volatile cpm8xx_t *cp;
+	volatile scc_t *sccp;
+	volatile hdlc_pram_t *hpr;
+	volatile iop8xx_t *iop;
+
+	if (already_inited)
+		return 0;
+
+	cp = (cpm8xx_t *)&(((volatile immap_t *)CONFIG_SYS_IMMR)->im_cpm);
+	hpr = (hdlc_pram_t *)(&cp->cp_dparam[MGS_PROFF_HDLC]);
+	sccp = (volatile scc_t *)(&cp->cp_scc[MGS_SCC_HDLC]);
+	iop = (iop8xx_t *)&(((volatile immap_t *)CONFIG_SYS_IMMR)->im_ioport);
+
+	/*
+	 * Disable receive and transmit just in case.
+	 */
+	sccp->scc_gsmrl &= ~(SCC_GSMRL_ENR | SCC_GSMRL_ENT);
+
+#ifndef CONFIG_SYS_ALLOC_DPRAM
+#error "CONFIG_SYS_ALLOC_DPRAM must be defined"
+#else
+	/*
+	 * Avoid exhausting DPRAM, which would cause a panic.
+	 * Actually this isn't really necessary, but leave it here
+	 * for safety's sake.
+	 */
+	if (rtx == NULL) {
+		rtx = (RTXBD *) (cp->cp_dpmem +
+			 dpram_alloc_align(sizeof(RTXBD), 8));
+		if (rtx == (RTXBD *)CPM_DP_NOSPACE)
+			return -1;
+		memset((void *)rtx, 0, sizeof(RTXBD));
+	}
+#endif /* !CONFIG_SYS_ALLOC_DPRAM */
+
+	/* We need the slot number for addressing. */
+	keymile_slot = *(char *)(CONFIG_SYS_SLOT_ID_BASE +
+		CONFIG_SYS_SLOT_ID_OFF) & CONFIG_SYS_SLOT_ID_MASK;
+	/*
+	 * Be consistent with the Linux driver and set
+	 * only enetaddr[0].
+	 *
+	 * Always add 1 to the slot number so that
+	 * there are no problems with an ethaddr which
+	 * is all 0s.  This should be acceptable because
+	 * a board should never have a slot number of 255,
+	 * which is the broadcast address.  The HDLC addressing
+	 * uses only the slot number.
+	 */
+	dev->enetaddr[0] = keymile_slot + 1;
+
+#ifdef TEST_IT
+	dprintf("slot %d\n", keymile_slot);
+#endif
+
+	/* use pa8, pa9 pins for TXD4, RXD4 respectively */
+	iop->iop_papar |= ((0x8000 >> 8) | (0x8000 >> 9));
+	iop->iop_padir &= ~((0x8000 >> 8) | (0x8000 >> 9));
+	iop->iop_paodr &= ~((0x8000 >> 8) | (0x8000 >> 9));
+
+	/* also use pa0 as CLK8 */
+	iop->iop_papar |= 0x8000;
+	iop->iop_padir &= ~0x8000;
+	iop->iop_paodr &= ~0x8000;
+
+	/* use pc5 as CTS4 */
+	iop->iop_pcpar &= ~(0x8000 >> 5);
+	iop->iop_pcdir &= ~(0x8000 >> 5);
+	iop->iop_pcso  |= (0x8000 >> 5);
+
+	/*
+	 * SI clock routing
+	 * use CLK8
+	 * this also connects SCC4 to NMSI
+	 */
+	cp->cp_sicr = (cp->cp_sicr & ~0xff000000) | 0x3f000000;
+
+	/* keymile_rxIdx = 0; */
+
+	/*
+	 * Initialize function code registers for big-endian.
+	 */
+	hpr->rfcr = SCC_EB;
+	hpr->tfcr = SCC_EB;
+
+	/*
+	 * Set maximum bytes per receive buffer.
+	 */
+	hpr->mrblr = MAX_FRAME_LENGTH;
+
+	/* Setup CRC generator values for HDLC */
+	hpr->c_mask = 0x0000F0B8;
+	hpr->c_pres = 0x0000FFFF;
+
+	/* Initialize all error counters to 0 */
+	hpr->disfc = 0;
+	hpr->crcec = 0;
+	hpr->abtsc = 0;
+	hpr->nmarc = 0;
+	hpr->retrc = 0;
+
+	/* Set maximum frame length size */
+	hpr->mflr = MAX_FRAME_LENGTH;
+
+	/* set to 1 for per frame processing change later if needed */
+	hpr->rfthr = 1;
+
+	hpr->hmask = 0xff;
+
+	hpr->haddr2 = SET_HDLC_UUA(keymile_slot);
+	hpr->haddr3 = hpr->haddr2;
+	hpr->haddr4 = hpr->haddr2;
+	/* broadcast */
+	hpr->haddr1 = HDLC_BCAST;
+
+	hpr->rbase = (unsigned int) &rtx->rxbd[0];
+	hpr->tbase = (unsigned int) &rtx->txbd;
+
+#if 0
+	/*
+	 * Initialize the buffer descriptors.
+	 */
+	bdp = &rtx->txbd;
+	bdp->cbd_sc = 0;
+	bdp->cbd_bufaddr = 0;
+	bdp->cbd_sc = BD_SC_WRAP;
+
+	/*
+	 *	Setup RX packet buffers, aligned correctly.
+	 *	Borrowed from net/net.c.
+	 */
+	MyRxPackets[0] = &MyPktBuf[0] + (PKTALIGN - 1);
+	MyRxPackets[0] -= (ulong)MyRxPackets[0] % PKTALIGN;
+	for (i = 1; i < HDLC_PKTBUFSRX; i++)
+		MyRxPackets[i] = MyRxPackets[0] + i * PKT_MAXBLR_SIZE;
+
+	bdp = &rtx->rxbd[0];
+	for (i = 0; i < HDLC_PKTBUFSRX; i++) {
+		bdp->cbd_sc = BD_SC_EMPTY;
+		/* Leave space at the start for INET header. */
+		bdp->cbd_bufaddr = (unsigned int)(MyRxPackets[i] +
+			INET_HDR_ALIGN);
+		bdp++;
+	}
+	bdp--;
+	bdp->cbd_sc |= BD_SC_WRAP;
+#else
+	keymile_hdlc_enet_init_bds(rtx);
+#endif
+
+	/* Let's re-initialize the channel now.	 We have to do it later
+	 * than the manual describes because we have just now finished
+	 * the BD initialization.
+	 */
+	cp->cp_cpcr = mk_cr_cmd(MGS_CPM_CR_HDLC, CPM_CR_INIT_TRX) | CPM_CR_FLG;
+	while (cp->cp_cpcr & CPM_CR_FLG);
+
+	sccp->scc_gsmrl = SCC_GSMRL_MODE_HDLC;
+	/* CTSS=1 */
+	sccp->scc_gsmrh = SCC_GSMRH_CTSS;
+	/* NOF=0, RTE=1, DRT=0, BUS=1 */
+	sccp->scc_psmr = ((0x8000 >> 6) | (0x8000 >> 10));
+
+/* loopback for local testing */
+#ifdef GJTEST
+	dprintf("LOOPBACK!\n");
+	sccp->scc_gsmrl |= SCC_GSMRL_DIAG_LOOP;
+#endif
+
+	/*
+	 * Disable all interrupts and clear all pending
+	 * events.
+	 */
+	sccp->scc_sccm = 0;
+	sccp->scc_scce = 0xffff;
+
+	/*
+	 * And last, enable the transmit and receive processing.
+	 */
+	sccp->scc_gsmrl |= (SCC_GSMRL_ENR | SCC_GSMRL_ENT);
+
+	dprintf("%s: HDLC ENET Version 0.3 on SCC%d\n", dev->name,
+		MGS_SCC_HDLC + 1);
+
+	/*
+	 * We may not get an ARP packet because ARP was already done on
+	 * a different interface, so initialize the cached values now.
+	 */
+	initCachedNumbers(1);
+
+	already_inited = 1;
+
+	return 0;
+}
+
+void keymile_hdlc_enet_halt(struct eth_device *dev)
+{
+#if 0 /* just return, but keep this for reference */
+	volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
+
+	/* maybe should do a graceful stop here? */
+	immr->im_cpm.cp_scc[MGS_SCC_HDLC].scc_gsmrl &=
+		~(SCC_GSMRL_ENR | SCC_GSMRL_ENT);
+#endif
+}
+
+#endif /* CONFIG_KEYMILE_HDLC_ENET */
diff --git a/board/mgsuvd/u-boot.lds b/board/keymile/mgsuvd/u-boot.lds
index 8c46e4677..5af36c97a 100644
--- a/board/mgsuvd/u-boot.lds
+++ b/board/keymile/mgsuvd/u-boot.lds
@@ -66,7 +66,7 @@ SECTIONS
     lib_ppc/time.o		(.text)
 
     . = DEFINED(env_offset) ? env_offset : .;
-    common/environment.o	(.ppcenv)
+    common/env_embedded.o	(.ppcenv)
 
     *(.text)
     *(.fixup)
@@ -137,6 +137,7 @@ SECTIONS
    *(.dynbss)
    *(.bss)
    *(COMMON)
+   . = ALIGN(4);
   }
   _end = . ;
   PROVIDE (end = .);
diff --git a/board/korat/config.mk b/board/korat/config.mk
index fa8374f17..73180dbd8 100644
--- a/board/korat/config.mk
+++ b/board/korat/config.mk
@@ -35,7 +35,7 @@ PLATFORM_CPPFLAGS += -fno-schedule-insns -fno-schedule-insns2
 endif
 
 ifeq ($(dbcr),1)
-PLATFORM_CPPFLAGS += -DCFG_INIT_DBCR=0x8CFF0000
+PLATFORM_CPPFLAGS += -DCONFIG_SYS_INIT_DBCR=0x8CFF0000
 endif
 
 ifeq ($(perm),1)
diff --git a/board/korat/init.S b/board/korat/init.S
index bf8b2c808..ea43a1f89 100644
--- a/board/korat/init.S
+++ b/board/korat/init.S
@@ -50,27 +50,27 @@ tlbtab:
 	 * generated dynamically in the SPD DDR2 detection routine.
 	 */
 
-#ifdef CFG_INIT_RAM_DCACHE
+#ifdef CONFIG_SYS_INIT_RAM_DCACHE
 	/* TLB-entry for init-ram in dcache (SA_I must be turned off!) */
-	tlbentry( CFG_INIT_RAM_ADDR, SZ_64K, CFG_INIT_RAM_ADDR, 0,
+	tlbentry( CONFIG_SYS_INIT_RAM_ADDR, SZ_64K, CONFIG_SYS_INIT_RAM_ADDR, 0,
 		  AC_R|AC_W|AC_X|SA_G )
 #endif
 
 	/* TLB-entry for PCI Memory */
-	tlbentry( CFG_PCI_MEMBASE + 0x00000000, SZ_256M,
-		  CFG_PCI_MEMBASE + 0x00000000, 1, AC_R|AC_W|SA_G|SA_I )
+	tlbentry( CONFIG_SYS_PCI_MEMBASE + 0x00000000, SZ_256M,
+		  CONFIG_SYS_PCI_MEMBASE + 0x00000000, 1, AC_R|AC_W|SA_G|SA_I )
 
-	tlbentry( CFG_PCI_MEMBASE + 0x10000000, SZ_256M,
-		  CFG_PCI_MEMBASE + 0x10000000, 1, AC_R|AC_W|SA_G|SA_I )
+	tlbentry( CONFIG_SYS_PCI_MEMBASE + 0x10000000, SZ_256M,
+		  CONFIG_SYS_PCI_MEMBASE + 0x10000000, 1, AC_R|AC_W|SA_G|SA_I )
 
-	tlbentry( CFG_PCI_MEMBASE + 0x20000000, SZ_256M,
-		  CFG_PCI_MEMBASE + 0x20000000, 1, AC_R|AC_W|SA_G|SA_I )
+	tlbentry( CONFIG_SYS_PCI_MEMBASE + 0x20000000, SZ_256M,
+		  CONFIG_SYS_PCI_MEMBASE + 0x20000000, 1, AC_R|AC_W|SA_G|SA_I )
 
-	tlbentry( CFG_PCI_MEMBASE + 0x30000000, SZ_256M,
-		  CFG_PCI_MEMBASE + 0x30000000, 1, AC_R|AC_W|SA_G|SA_I )
+	tlbentry( CONFIG_SYS_PCI_MEMBASE + 0x30000000, SZ_256M,
+		  CONFIG_SYS_PCI_MEMBASE + 0x30000000, 1, AC_R|AC_W|SA_G|SA_I )
 
 	/* TLB-entry for EBC */
-	tlbentry( CFG_CPLD_BASE, SZ_1K, CFG_CPLD_BASE, 1, AC_R|AC_W|SA_G|SA_I )
+	tlbentry( CONFIG_SYS_CPLD_BASE, SZ_1K, CONFIG_SYS_CPLD_BASE, 1, AC_R|AC_W|SA_G|SA_I )
 
 	/* TLB-entry for Internal Registers & OCM */
 	/* I wonder why this must be executable -- lrj@acm.org 2007-10-08 */
diff --git a/board/korat/korat.c b/board/korat/korat.c
index 0d90fb31d..5ad75f74d 100644
--- a/board/korat/korat.c
+++ b/board/korat/korat.c
@@ -38,7 +38,7 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
-extern flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
+extern flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */
 
 ulong flash_get_size(ulong base, int banknum);
 
@@ -46,11 +46,11 @@ ulong flash_get_size(ulong base, int banknum);
 void korat_buzzer(int const on)
 {
 	if (on) {
-		out_8((u8 *) CFG_CPLD_BASE + 0x05,
-		      in_8((u8 *) CFG_CPLD_BASE + 0x05) | 0x80);
+		out_8((u8 *) CONFIG_SYS_CPLD_BASE + 0x05,
+		      in_8((u8 *) CONFIG_SYS_CPLD_BASE + 0x05) | 0x80);
 	} else {
-		out_8((u8 *) CFG_CPLD_BASE + 0x05,
-		      in_8((u8 *) CFG_CPLD_BASE + 0x05) & ~0x80);
+		out_8((u8 *) CONFIG_SYS_CPLD_BASE + 0x05,
+		      in_8((u8 *) CONFIG_SYS_CPLD_BASE + 0x05) & ~0x80);
 	}
 }
 #endif
@@ -66,16 +66,16 @@ int board_early_init_f(void)
 
 	extern void korat_branch_absolute(uint32_t addr);
 
-	for (mscount = 0;  mscount < CFG_KORAT_MAN_RESET_MS; ++mscount) {
+	for (mscount = 0;  mscount < CONFIG_SYS_KORAT_MAN_RESET_MS; ++mscount) {
 		udelay(1000);
-		if (gpio_read_in_bit(CFG_GPIO_RESET_PRESSED_)) {
+		if (gpio_read_in_bit(CONFIG_SYS_GPIO_RESET_PRESSED_)) {
 			/* This call does not return. */
 			korat_branch_absolute(
-				CFG_FLASH1_TOP - 2 * CFG_ENV_SECT_SIZE - 4);
+				CONFIG_SYS_FLASH1_TOP - 2 * CONFIG_ENV_SECT_SIZE - 4);
 		}
 	}
 	korat_buzzer(1);
-	while (!gpio_read_in_bit(CFG_GPIO_RESET_PRESSED_))
+	while (!gpio_read_in_bit(CONFIG_SYS_GPIO_RESET_PRESSED_))
 		udelay(1000);
 
 	korat_buzzer(0);
@@ -115,33 +115,33 @@ int board_early_init_f(void)
 	 * Take sim card reader and CF controller out of reset.  Also enable PHY
 	 * auto-detect until board-specific PHY resets are available.
 	 */
-	out_8((u8 *) CFG_CPLD_BASE + 0x02, 0xC0);
+	out_8((u8 *) CONFIG_SYS_CPLD_BASE + 0x02, 0xC0);
 
 	/* Configure the two Ethernet PHYs.  For each PHY, configure for fiber
 	 * if the SFP module is present, and for copper if it is not present.
 	 */
 	for (eth = 0; eth < 2; ++eth) {
-		if (gpio_read_in_bit(CFG_GPIO_SFP0_PRESENT_ + eth)) {
+		if (gpio_read_in_bit(CONFIG_SYS_GPIO_SFP0_PRESENT_ + eth)) {
 			/* SFP module not present: configure PHY for copper. */
 			/* Set PHY to autonegotate 10 MB, 100MB, or 1 GB */
-			out_8((u8 *) CFG_CPLD_BASE + 0x03,
-			      in_8((u8 *) CFG_CPLD_BASE + 0x03) |
+			out_8((u8 *) CONFIG_SYS_CPLD_BASE + 0x03,
+			      in_8((u8 *) CONFIG_SYS_CPLD_BASE + 0x03) |
 			      0x06 << (4 * eth));
 		} else {
 			/* SFP module present: configure PHY for fiber and
 			   enable output */
-			gpio_write_bit(CFG_GPIO_PHY0_FIBER_SEL + eth, 1);
-			gpio_write_bit(CFG_GPIO_SFP0_TX_EN_ + eth, 0);
+			gpio_write_bit(CONFIG_SYS_GPIO_PHY0_FIBER_SEL + eth, 1);
+			gpio_write_bit(CONFIG_SYS_GPIO_SFP0_TX_EN_ + eth, 0);
 		}
 	}
 	/* enable Ethernet: set GPIO45 and GPIO46 to 1 */
-	gpio_write_bit(CFG_GPIO_PHY0_EN, 1);
-	gpio_write_bit(CFG_GPIO_PHY1_EN, 1);
+	gpio_write_bit(CONFIG_SYS_GPIO_PHY0_EN, 1);
+	gpio_write_bit(CONFIG_SYS_GPIO_PHY1_EN, 1);
 
 	/* Wait 1 ms, then enable Fiber signal detect to PHYs. */
 	udelay(1000);
-	out_8((u8 *) CFG_CPLD_BASE + 0x03,
-	      in_8((u8 *) CFG_CPLD_BASE + 0x03) | 0x88);
+	out_8((u8 *) CONFIG_SYS_CPLD_BASE + 0x03,
+	      in_8((u8 *) CONFIG_SYS_CPLD_BASE + 0x03) | 0x88);
 
 	/* select Ethernet (and optionally IIC1) pins */
 	mfsdr(SDR0_PFC1, sdr0_pfc1);
@@ -176,8 +176,8 @@ ulong board_flash_get_legacy (ulong base, int banknum, flash_info_t * info)
 	if (1 != banknum)
 		return 0;
 
-	info->size		= CFG_FLASH0_SIZE;
-	info->sector_count	= CFG_FLASH0_SIZE / 0x20000;
+	info->size		= CONFIG_SYS_FLASH0_SIZE;
+	info->sector_count	= CONFIG_SYS_FLASH0_SIZE / 0x20000;
 	info->flash_id		= 0x01000000;
 	info->portwidth		= 2;
 	info->chipwidth		= 2;
@@ -192,12 +192,12 @@ ulong board_flash_get_legacy (ulong base, int banknum, flash_info_t * info)
 	info->manufacturer_id	= 1;
 	info->device_id		= 0x007E;
 
-#if CFG_FLASH0_SIZE == 0x01000000
+#if CONFIG_SYS_FLASH0_SIZE == 0x01000000
 	info->device_id2	= 0x2101;
-#elif CFG_FLASH0_SIZE == 0x04000000
+#elif CONFIG_SYS_FLASH0_SIZE == 0x04000000
 	info->device_id2	= 0x2301;
 #else
-#error Unable to set device_id2 for current CFG_FLASH0_SIZE
+#error Unable to set device_id2 for current CONFIG_SYS_FLASH0_SIZE
 #endif
 
 	info->ext_addr		= 0x0040;
@@ -349,13 +349,13 @@ int misc_init_r(void)
 	unsigned long usb2d0cr = 0;
 	unsigned long usb2phy0cr, usb2h0cr = 0;
 	unsigned long sdr0_pfc1;
-	uint32_t const flash1_size = gd->bd->bi_flashsize - CFG_FLASH0_SIZE;
+	uint32_t const flash1_size = gd->bd->bi_flashsize - CONFIG_SYS_FLASH0_SIZE;
 	char const *const act = getenv("usbact");
 
 	/*
 	 * Re-do FLASH1 sizing and adjust flash start and offset.
 	 */
-	gd->bd->bi_flashstart = CFG_FLASH1_TOP - flash1_size;
+	gd->bd->bi_flashstart = CONFIG_SYS_FLASH1_TOP - flash1_size;
 	gd->bd->bi_flashoffset = 0;
 
 	mtdcr(ebccfga, pb1cr);
@@ -375,31 +375,31 @@ int misc_init_r(void)
 	 * environment
 	 */
 	gd->bd->bi_flashoffset =
-		CFG_ENV_ADDR_REDUND + CFG_ENV_SECT_SIZE - CFG_FLASH1_ADDR;
+		CONFIG_ENV_ADDR_REDUND + CONFIG_ENV_SECT_SIZE - CONFIG_SYS_FLASH1_ADDR;
 
 	mtdcr(ebccfga, pb1cr);
 	pbcr = mfdcr(ebccfgd);
-	size_val = ffs(gd->bd->bi_flashsize - CFG_FLASH0_SIZE) - 21;
+	size_val = ffs(gd->bd->bi_flashsize - CONFIG_SYS_FLASH0_SIZE) - 21;
 	pbcr = (pbcr & 0x0001ffff) | gd->bd->bi_flashstart | (size_val << 17);
 	mtdcr(ebccfga, pb1cr);
 	mtdcr(ebccfgd, pbcr);
 
 	/* Monitor protection ON by default */
 #if defined(CONFIG_KORAT_PERMANENT)
-	(void)flash_protect(FLAG_PROTECT_SET, CFG_MONITOR_BASE,
-			    CFG_MONITOR_BASE + CFG_MONITOR_LEN - 1,
+	(void)flash_protect(FLAG_PROTECT_SET, CONFIG_SYS_MONITOR_BASE,
+			    CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN - 1,
 			    flash_info + 1);
 #else
-	(void)flash_protect(FLAG_PROTECT_SET, CFG_MONITOR_BASE,
-			    CFG_MONITOR_BASE + CFG_MONITOR_LEN - 1,
+	(void)flash_protect(FLAG_PROTECT_SET, CONFIG_SYS_MONITOR_BASE,
+			    CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN - 1,
 			    flash_info);
 #endif
 	/* Env protection ON by default */
-	(void)flash_protect(FLAG_PROTECT_SET, CFG_ENV_ADDR,
-			    CFG_ENV_ADDR + CFG_ENV_SECT_SIZE - 1,
+	(void)flash_protect(FLAG_PROTECT_SET, CONFIG_ENV_ADDR,
+			    CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE - 1,
 			    flash_info);
-	(void)flash_protect(FLAG_PROTECT_SET, CFG_ENV_ADDR_REDUND,
-			    CFG_ENV_ADDR_REDUND + CFG_ENV_SECT_SIZE - 1,
+	(void)flash_protect(FLAG_PROTECT_SET, CONFIG_ENV_ADDR_REDUND,
+			    CONFIG_ENV_ADDR_REDUND + CONFIG_ENV_SECT_SIZE - 1,
 			    flash_info);
 
 	/*
@@ -536,7 +536,7 @@ int misc_init_r(void)
 
 	set_serial_number();
 	set_mac_addresses();
-	gpio_write_bit(CFG_GPIO_ATMEGA_RESET_, 1);
+	gpio_write_bit(CONFIG_SYS_GPIO_ATMEGA_RESET_, 1);
 
 	return 0;
 }
@@ -544,20 +544,20 @@ int misc_init_r(void)
 int checkboard(void)
 {
 	char const *const s = getenv("serial#");
-	u8 const rev = in_8((u8 *) CFG_CPLD_BASE + 0);
+	u8 const rev = in_8((u8 *) CONFIG_SYS_CPLD_BASE + 0);
 
 	printf("Board: Korat, Rev. %X", rev);
 	if (s)
 		printf(", serial# %s", s);
 
 	printf(".\n       Ethernet PHY 0: ");
-	if (gpio_read_out_bit(CFG_GPIO_PHY0_FIBER_SEL))
+	if (gpio_read_out_bit(CONFIG_SYS_GPIO_PHY0_FIBER_SEL))
 		printf("fiber");
 	else
 		printf("copper");
 
 	printf(", PHY 1: ");
-	if (gpio_read_out_bit(CFG_GPIO_PHY1_FIBER_SEL))
+	if (gpio_read_out_bit(CONFIG_SYS_GPIO_PHY1_FIBER_SEL))
 		printf("fiber");
 	else
 		printf("copper");
@@ -644,7 +644,7 @@ int pci_pre_init(struct pci_controller *hose)
  * inbound map (PIM). But the bootstrap config choices are limited and
  * may not be sufficient for a given board.
  */
-#if defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT)
+#if defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT)
 void pci_target_init(struct pci_controller *hose)
 {
 	/*
@@ -660,9 +660,9 @@ void pci_target_init(struct pci_controller *hose)
 	 */
 	out32r(PCIX0_PMM0MA, 0x00000000);	/* PMM0 Mask/Attribute */
 						/* - disabled b4 setting */
-	out32r(PCIX0_PMM0LA, CFG_PCI_MEMBASE);	/* PMM0 Local Address */
+	out32r(PCIX0_PMM0LA, CONFIG_SYS_PCI_MEMBASE);	/* PMM0 Local Address */
 	out32r(PCIX0_PMM0PCILA,
-	       CFG_PCI_MEMBASE);		/* PMM0 PCI Low Address */
+	       CONFIG_SYS_PCI_MEMBASE);		/* PMM0 PCI Low Address */
 	out32r(PCIX0_PMM0PCIHA, 0x00000000);	/* PMM0 PCI High Address */
 	out32r(PCIX0_PMM0MA, 0xE0000001);	/* 512M + No prefetching, */
 						/* and enable region */
@@ -670,9 +670,9 @@ void pci_target_init(struct pci_controller *hose)
 	out32r(PCIX0_PMM1MA, 0x00000000);	/* PMM0 Mask/Attribute */
 						/* - disabled b4 setting */
 	out32r(PCIX0_PMM1LA,
-	       CFG_PCI_MEMBASE + 0x20000000);	/* PMM0 Local Address */
+	       CONFIG_SYS_PCI_MEMBASE + 0x20000000);	/* PMM0 Local Address */
 	out32r(PCIX0_PMM1PCILA,
-	       CFG_PCI_MEMBASE + 0x20000000);	/* PMM0 PCI Low Address */
+	       CONFIG_SYS_PCI_MEMBASE + 0x20000000);	/* PMM0 PCI Low Address */
 	out32r(PCIX0_PMM1PCIHA, 0x00000000);	/* PMM0 PCI High Address */
 	out32r(PCIX0_PMM1MA, 0xE0000001);	/* 512M + No prefetching, */
 						/* and enable region */
@@ -688,8 +688,8 @@ void pci_target_init(struct pci_controller *hose)
 
 	/* Program the board's subsystem id/vendor id */
 	pci_write_config_word(0, PCI_SUBSYSTEM_VENDOR_ID,
-			      CFG_PCI_SUBSYS_VENDORID);
-	pci_write_config_word(0, PCI_SUBSYSTEM_ID, CFG_PCI_SUBSYS_ID);
+			      CONFIG_SYS_PCI_SUBSYS_VENDORID);
+	pci_write_config_word(0, PCI_SUBSYSTEM_ID, CONFIG_SYS_PCI_SUBSYS_ID);
 
 	/* Configure command register as bus master */
 	pci_write_config_word(0, PCI_COMMAND, PCI_COMMAND_MASTER);
@@ -708,9 +708,9 @@ void pci_target_init(struct pci_controller *hose)
 	 */
 	pci_write_config_dword(PCI_BDF(0x0, 0xC, 0x0), 0xE4, 0x00000020);
 }
-#endif /* defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT) */
+#endif /* defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT) */
 
-#if defined(CONFIG_PCI) && defined(CFG_PCI_MASTER_INIT)
+#if defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_MASTER_INIT)
 void pci_master_init(struct pci_controller *hose)
 {
 	unsigned short temp_short;
@@ -771,7 +771,7 @@ void ft_board_setup(void *blob, bd_t *bd)
 	val[0] = 1;				/* chip select number */
 	val[1] = 0;				/* always 0 */
 	val[2] = gd->bd->bi_flashstart;
-	val[3] = gd->bd->bi_flashsize - CFG_FLASH0_SIZE;
+	val[3] = gd->bd->bi_flashsize - CONFIG_SYS_FLASH0_SIZE;
 	rc = fdt_find_and_setprop(blob, "/plb/opb/ebc", "ranges",
 				  val, sizeof(val), 1);
 	if (rc)
diff --git a/board/korat/u-boot-F7FC.lds b/board/korat/u-boot-F7FC.lds
index 6dccf958f..9bed401b7 100644
--- a/board/korat/u-boot-F7FC.lds
+++ b/board/korat/u-boot-F7FC.lds
@@ -135,6 +135,7 @@ SECTIONS
    *(.dynbss)
    *(.bss)
    *(COMMON)
+   . = ALIGN(4);
   }
 
   _end = . ;
diff --git a/board/korat/u-boot.lds b/board/korat/u-boot.lds
index b20fb1c0a..05152b7f7 100644
--- a/board/korat/u-boot.lds
+++ b/board/korat/u-boot.lds
@@ -135,9 +135,10 @@ SECTIONS
    *(.dynbss)
    *(.bss)
    *(COMMON)
+   . = ALIGN(4);
   }
 
-  ppcenv_assert = ASSERT(. < 0xFFFF8000, ".bss section too big, overlaps .ppcenv section. Please update your confguration: CFG_MONITOR_BASE, CFG_MONITOR_LEN and TEXT_BASE may need to be modified.");
+  ppcenv_assert = ASSERT(. < 0xFFFF8000, ".bss section too big, overlaps .ppcenv section. Please update your confguration: CONFIG_SYS_MONITOR_BASE, CONFIG_SYS_MONITOR_LEN and TEXT_BASE may need to be modified.");
 
   _end = . ;
   PROVIDE (end = .);
diff --git a/board/kup/common/flash.c b/board/kup/common/flash.c
index 903c88f06..134a9d591 100644
--- a/board/kup/common/flash.c
+++ b/board/kup/common/flash.c
@@ -24,13 +24,13 @@
 #include <common.h>
 #include <mpc8xx.h>
 
-#ifndef	CFG_ENV_ADDR
-#define CFG_ENV_ADDR	(CFG_FLASH_BASE + CFG_ENV_OFFSET)
+#ifndef	CONFIG_ENV_ADDR
+#define CONFIG_ENV_ADDR	(CONFIG_SYS_FLASH_BASE + CONFIG_ENV_OFFSET)
 #endif
 
 #define CONFIG_FLASH_16BIT
 
-flash_info_t	flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips	*/
+flash_info_t	flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips	*/
 
 /*-----------------------------------------------------------------------
  * Functions
@@ -43,13 +43,13 @@ static int write_word (flash_info_t *info, ulong dest, ulong data);
 
 unsigned long flash_init (void)
 {
-	volatile immap_t     *immap  = (immap_t *)CFG_IMMR;
+	volatile immap_t     *immap  = (immap_t *)CONFIG_SYS_IMMR;
 	volatile memctl8xx_t *memctl = &immap->im_memctl;
 	unsigned long size_b0;
 	int i;
 
 	/* Init: no FLASHes known */
-	for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) {
+	for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
 		flash_info[i].flash_id = FLASH_UNKNOWN;
 	}
 
@@ -64,25 +64,25 @@ unsigned long flash_init (void)
 
 
 	/* Remap FLASH according to real size */
-	memctl->memc_or0 = CFG_OR_TIMING_FLASH | (-size_b0 & OR_AM_MSK);
-	memctl->memc_br0 = (CFG_FLASH_BASE & BR_BA_MSK) | BR_MS_GPCM | BR_V | BR_PS_16;
+	memctl->memc_or0 = CONFIG_SYS_OR_TIMING_FLASH | (-size_b0 & OR_AM_MSK);
+	memctl->memc_br0 = (CONFIG_SYS_FLASH_BASE & BR_BA_MSK) | BR_MS_GPCM | BR_V | BR_PS_16;
 
 	/* Re-do sizing to get full correct info */
-	size_b0 = flash_get_size((vu_long *)CFG_FLASH_BASE, &flash_info[0]);
+	size_b0 = flash_get_size((vu_long *)CONFIG_SYS_FLASH_BASE, &flash_info[0]);
 
-#if CFG_MONITOR_BASE >= CFG_FLASH_BASE
+#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE
 	/* monitor protection ON by default */
 	flash_protect(FLAG_PROTECT_SET,
-		      CFG_MONITOR_BASE,
-		      CFG_MONITOR_BASE+monitor_flash_len-1,
+		      CONFIG_SYS_MONITOR_BASE,
+		      CONFIG_SYS_MONITOR_BASE+monitor_flash_len-1,
 		      &flash_info[0]);
 #endif
 
-#ifdef	CFG_ENV_IS_IN_FLASH
+#ifdef	CONFIG_ENV_IS_IN_FLASH
 	/* ENV protection ON by default */
 	flash_protect(FLAG_PROTECT_SET,
-		      CFG_ENV_ADDR,
-		      CFG_ENV_ADDR+CFG_ENV_SIZE-1,
+		      CONFIG_ENV_ADDR,
+		      CONFIG_ENV_ADDR+CONFIG_ENV_SIZE-1,
 		      &flash_info[0]);
 #endif
 
@@ -325,7 +325,7 @@ int	flash_erase (flash_info_t *info, int s_first, int s_last)
 #else
 			while ((sect_addr[0] & 0x00800080) != 0x00800080) {
 #endif
-				if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+				if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
 					printf ("Timeout\n");
 					return 1;
 				}
@@ -467,7 +467,7 @@ static int write_word (flash_info_t *info, ulong dest, ulong data)
 	/* data polling for D7 */
 	start = get_timer (0);
 	while ((*((vu_short *)dest) & 0x0080) != (high_data & 0x0080)) {
-		if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+		if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
 			return (1);
 		}
 	}
@@ -507,7 +507,7 @@ static int write_word (flash_info_t *info, ulong dest, ulong data)
 	while ((*((vu_long *)dest) & 0x00800080) != (data & 0x00800080)) {
 #endif
 
-		if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+		if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
 			return (1);
 		}
 	}
diff --git a/board/kup/common/kup.c b/board/kup/common/kup.c
index d018e3cc5..fec5407bc 100644
--- a/board/kup/common/kup.c
+++ b/board/kup/common/kup.c
@@ -27,7 +27,7 @@
 
 int misc_init_f (void)
 {
-	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
 	volatile sysconf8xx_t *siu = &immap->im_siu_conf;
 
 	while (siu->sc_sipend & 0x20000000) {
@@ -47,7 +47,7 @@ int misc_init_f (void)
 #ifdef CONFIG_IDE_LED
 void ide_led (uchar led, uchar status)
 {
-	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
 
 	/* We have one led for both pcmcia slots */
 	if (status) {		/* led on */
@@ -60,7 +60,7 @@ void ide_led (uchar led, uchar status)
 
 void poweron_key (void)
 {
-	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
 
 	immap->im_ioport.iop_pcpar &= ~(PC_SWITCH1);
 	immap->im_ioport.iop_pcdir &= ~(PC_SWITCH1);
diff --git a/board/kup/common/load_sernum_ethaddr.c b/board/kup/common/load_sernum_ethaddr.c
index b7b749985..741e9a536 100644
--- a/board/kup/common/load_sernum_ethaddr.c
+++ b/board/kup/common/load_sernum_ethaddr.c
@@ -33,8 +33,8 @@
  * The KUP Hardware Information Block is defined as
  * follows:
  * - located in first flash bank
- * - starts at offset CFG_HWINFO_OFFSET
- * - size CFG_HWINFO_SIZE
+ * - starts at offset CONFIG_SYS_HWINFO_OFFSET
+ * - size CONFIG_SYS_HWINFO_SIZE
  *
  * Internal structure:
  * - sequence of ASCII character lines
@@ -55,15 +55,15 @@ void load_sernum_ethaddr (void)
 {
 	unsigned char *hwi;
 	char *var;
-	unsigned char hwi_stack[CFG_HWINFO_SIZE];
+	unsigned char hwi_stack[CONFIG_SYS_HWINFO_SIZE];
 	char *p;
 
-	hwi = (unsigned char *) (CFG_FLASH_BASE + CFG_HWINFO_OFFSET);
-	if (*((unsigned long *) hwi) != (unsigned long) CFG_HWINFO_MAGIC) {
+	hwi = (unsigned char *) (CONFIG_SYS_FLASH_BASE + CONFIG_SYS_HWINFO_OFFSET);
+	if (*((unsigned long *) hwi) != (unsigned long) CONFIG_SYS_HWINFO_MAGIC) {
 		printf ("HardwareInfo not found!\n");
 		return;
 	}
-	memcpy (hwi_stack, hwi, CFG_HWINFO_SIZE);
+	memcpy (hwi_stack, hwi, CONFIG_SYS_HWINFO_SIZE);
 
 	/*
 	 ** ethaddr
@@ -72,7 +72,7 @@ void load_sernum_ethaddr (void)
 	if (var) {
 		var += sizeof (ETHADDR_TOKEN) - 1;
 		p = strchr (var, '\r');
-		if ((unsigned char *)p < hwi + CFG_HWINFO_SIZE) {
+		if ((unsigned char *)p < hwi + CONFIG_SYS_HWINFO_SIZE) {
 			*p = '\0';
 			setenv ("ethaddr", var);
 			*p = '\r';
@@ -85,7 +85,7 @@ void load_sernum_ethaddr (void)
 	if (var) {
 		var += sizeof (LCD_TOKEN) - 1;
 		p = strchr (var, '\r');
-		if ((unsigned char *)p < hwi + CFG_HWINFO_SIZE) {
+		if ((unsigned char *)p < hwi + CONFIG_SYS_HWINFO_SIZE) {
 			*p = '\0';
 			setenv ("lcd", var);
 			*p = '\r';
diff --git a/board/kup/common/pcmcia.c b/board/kup/common/pcmcia.c
index 8f0cf17b9..ce6b1861d 100644
--- a/board/kup/common/pcmcia.c
+++ b/board/kup/common/pcmcia.c
@@ -30,10 +30,10 @@ int pcmcia_hardware_enable(int slot)
 
 	udelay(10000);
 
-	immap = (immap_t *)CFG_IMMR;
-	sysp  = (sysconf8xx_t *)(&(((immap_t *)CFG_IMMR)->im_siu_conf));
-	pcmp  = (pcmconf8xx_t *)(&(((immap_t *)CFG_IMMR)->im_pcmcia));
-	cp    = (cpm8xx_t *)(&(((immap_t *)CFG_IMMR)->im_cpm));
+	immap = (immap_t *)CONFIG_SYS_IMMR;
+	sysp  = (sysconf8xx_t *)(&(((immap_t *)CONFIG_SYS_IMMR)->im_siu_conf));
+	pcmp  = (pcmconf8xx_t *)(&(((immap_t *)CONFIG_SYS_IMMR)->im_pcmcia));
+	cp    = (cpm8xx_t *)(&(((immap_t *)CONFIG_SYS_IMMR)->im_cpm));
 
 	/*
 	* Configure SIUMCR to enable PCMCIA port B
@@ -125,9 +125,9 @@ int pcmcia_hardware_disable(int slot)
 
 	debug ("hardware_disable: " PCMCIA_BOARD_MSG " Slot %c\n", 'A'+slot);
 
-	immap = (immap_t *)CFG_IMMR;
-	pcmp = (pcmconf8xx_t *)(&(((immap_t *)CFG_IMMR)->im_pcmcia));
-	cp    = (cpm8xx_t *)(&(((immap_t *)CFG_IMMR)->im_cpm));
+	immap = (immap_t *)CONFIG_SYS_IMMR;
+	pcmp = (pcmconf8xx_t *)(&(((immap_t *)CONFIG_SYS_IMMR)->im_pcmcia));
+	cp    = (cpm8xx_t *)(&(((immap_t *)CONFIG_SYS_IMMR)->im_cpm));
 
 	/* remove all power */
 	if (slot)
@@ -162,9 +162,9 @@ int pcmcia_voltage_set(int slot, int vcc, int vpp)
 	if (!slot) /* Slot A is not configurable */
 		return 0;
 
-	immap = (immap_t *)CFG_IMMR;
-	pcmp = (pcmconf8xx_t *)(&(((immap_t *)CFG_IMMR)->im_pcmcia));
-	cp    = (cpm8xx_t *)(&(((immap_t *)CFG_IMMR)->im_cpm));
+	immap = (immap_t *)CONFIG_SYS_IMMR;
+	pcmp = (pcmconf8xx_t *)(&(((immap_t *)CONFIG_SYS_IMMR)->im_pcmcia));
+	cp    = (cpm8xx_t *)(&(((immap_t *)CONFIG_SYS_IMMR)->im_cpm));
 
 	/*
 	* Disable PCMCIA buffers (isolate the interface)
diff --git a/board/kup/kup4k/kup4k.c b/board/kup/kup4k/kup4k.c
index 66d618072..df3ffb4d7 100644
--- a/board/kup/kup4k/kup4k.c
+++ b/board/kup/kup4k/kup4k.c
@@ -119,7 +119,7 @@ const uint sdram_table[] = {
 
 int checkboard (void)
 {
-	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
 	uchar *latch,rev,mod;
 
 	/*
@@ -139,7 +139,7 @@ int checkboard (void)
 
 phys_size_t initdram (int board_type)
 {
-	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
 	volatile memctl8xx_t *memctl = &immap->im_memctl;
 	long int size_b0 = 0;
 	long int size_b1 = 0;
@@ -154,7 +154,7 @@ phys_size_t initdram (int board_type)
 	 * with two SDRAM banks or four cycles every 31.2 us with one
 	 * bank. It will be adjusted after memory sizing.
 	 */
-	memctl->memc_mptpr = CFG_MPTPR;
+	memctl->memc_mptpr = CONFIG_SYS_MPTPR;
 
 	memctl->memc_mar = 0x00000088;
 
@@ -163,14 +163,14 @@ phys_size_t initdram (int board_type)
 	 * preliminary addresses - these have to be modified after the
 	 * SDRAM size has been determined.
 	 */
-/*	memctl->memc_or1 = CFG_OR1_PRELIM;	*/
-/*	memctl->memc_br1 = CFG_BR1_PRELIM;	*/
+/*	memctl->memc_or1 = CONFIG_SYS_OR1_PRELIM;	*/
+/*	memctl->memc_br1 = CONFIG_SYS_BR1_PRELIM;	*/
 
-/*	memctl->memc_or2 = CFG_OR2_PRELIM;	*/
-/*	memctl->memc_br2 = CFG_BR2_PRELIM;	*/
+/*	memctl->memc_or2 = CONFIG_SYS_OR2_PRELIM;	*/
+/*	memctl->memc_br2 = CONFIG_SYS_BR2_PRELIM;	*/
 
 
-	memctl->memc_mamr = CFG_MAMR & (~(MAMR_PTAE));	/* no refresh yet */
+	memctl->memc_mamr = CONFIG_SYS_MAMR & (~(MAMR_PTAE));	/* no refresh yet */
 
 	udelay (200);
 
@@ -204,7 +204,7 @@ phys_size_t initdram (int board_type)
 	size_b0 = 0x00800000;
 	size_b1 = 0x00800000;
 	size_b2 = 0x00800000;
-	memctl->memc_mptpr = CFG_MPTPR;
+	memctl->memc_mptpr = CONFIG_SYS_MPTPR;
 	udelay (1000);
 	memctl->memc_or1 = 0xFF800A00;
 	memctl->memc_br1 = 0x00000081;
@@ -216,7 +216,7 @@ phys_size_t initdram (int board_type)
 	size_b0 = 0x01000000;
 	size_b1 = 0x01000000;
 	size_b2 = 0x01000000;
-	memctl->memc_mptpr = CFG_MPTPR;
+	memctl->memc_mptpr = CONFIG_SYS_MPTPR;
 	udelay (1000);
 	memctl->memc_or1 = 0xFF000A00;
 	memctl->memc_br1 = 0x00000081;
@@ -236,7 +236,7 @@ phys_size_t initdram (int board_type)
 int misc_init_r (void)
 {
 #ifdef CONFIG_STATUS_LED
-	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
 #endif
 #ifdef CONFIG_KUP4K_LOGO
 	bd_t *bd = gd->bd;
@@ -263,7 +263,7 @@ void lcd_logo (bd_t * bd)
 	FB_INFO_S1D13xxx fb_info;
 	S1D_INDEX s1dReg;
 	S1D_VALUE s1dValue;
-	volatile immap_t *immr = (immap_t *) CFG_IMMR;
+	volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
 	volatile memctl8xx_t *memctl;
 	ushort i;
 	uchar *fb;
diff --git a/board/kup/kup4k/u-boot.lds b/board/kup/kup4k/u-boot.lds
index 2e9169c16..120ca00fd 100644
--- a/board/kup/kup4k/u-boot.lds
+++ b/board/kup/kup4k/u-boot.lds
@@ -65,7 +65,7 @@ SECTIONS
     lib_generic/zlib.o		(.text)
 
     . = env_offset;
-    common/environment.o(.text)
+    common/env_embedded.o(.text)
 */
 
     *(.text)
@@ -137,6 +137,7 @@ SECTIONS
    *(.dynbss)
    *(.bss)
    *(COMMON)
+   . = ALIGN(4);
   }
   _end = . ;
   PROVIDE (end = .);
diff --git a/board/kup/kup4k/u-boot.lds.debug b/board/kup/kup4k/u-boot.lds.debug
index f6d153763..0f6ae696d 100644
--- a/board/kup/kup4k/u-boot.lds.debug
+++ b/board/kup/kup4k/u-boot.lds.debug
@@ -61,7 +61,7 @@ SECTIONS
     lib_generic/crc32.o		(.text)
 
     . = env_offset;
-    common/environment.o(.text)
+    common/env_embedded.o(.text)
 
     *(.text)
     *(.fixup)
diff --git a/board/kup/kup4x/kup4x.c b/board/kup/kup4x/kup4x.c
index f07ef1870..c5b742dd7 100644
--- a/board/kup/kup4x/kup4x.c
+++ b/board/kup/kup4x/kup4x.c
@@ -114,7 +114,7 @@ const uint sdram_table[] = {
 
 int checkboard (void)
 {
-	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
 	volatile memctl8xx_t *memctl = &immap->im_memctl;
 	volatile uchar *latch;
 	uchar rev, mod;
@@ -136,7 +136,7 @@ int checkboard (void)
 
 phys_size_t initdram (int board_type)
 {
-	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
 	volatile memctl8xx_t *memctl = &immap->im_memctl;
 	long int size_b0 = 0;
 	long int size_b1 = 0;
@@ -151,7 +151,7 @@ phys_size_t initdram (int board_type)
 	 * with two SDRAM banks or four cycles every 31.2 us with one
 	 * bank. It will be adjusted after memory sizing.
 	 */
-	memctl->memc_mptpr = CFG_MPTPR;
+	memctl->memc_mptpr = CONFIG_SYS_MPTPR;
 
 	memctl->memc_mar = 0x00000088;
 
@@ -160,13 +160,13 @@ phys_size_t initdram (int board_type)
 	 * preliminary addresses - these have to be modified after the
 	 * SDRAM size has been determined.
 	 */
-/*	memctl->memc_or1 = CFG_OR1_PRELIM;	*/
-/*	memctl->memc_br1 = CFG_BR1_PRELIM;	*/
+/*	memctl->memc_or1 = CONFIG_SYS_OR1_PRELIM;	*/
+/*	memctl->memc_br1 = CONFIG_SYS_BR1_PRELIM;	*/
 
-/*	memctl->memc_or2 = CFG_OR2_PRELIM;	*/
-/*	memctl->memc_br2 = CFG_BR2_PRELIM;	*/
+/*	memctl->memc_or2 = CONFIG_SYS_OR2_PRELIM;	*/
+/*	memctl->memc_br2 = CONFIG_SYS_BR2_PRELIM;	*/
 
-	memctl->memc_mamr = CFG_MAMR & (~(MAMR_PTAE));	/* no refresh yet */
+	memctl->memc_mamr = CONFIG_SYS_MAMR & (~(MAMR_PTAE));	/* no refresh yet */
 
 	udelay (200);
 
@@ -207,7 +207,7 @@ phys_size_t initdram (int board_type)
 	size_b1 = 0x00800000;
 	size_b2 = 0x00800000;
 	size_b3 = 0x00800000;
-	memctl->memc_mptpr = CFG_MPTPR;
+	memctl->memc_mptpr = CONFIG_SYS_MPTPR;
 	udelay (1000);
 	memctl->memc_or1 = 0xFF800A00;
 	memctl->memc_br1 = 0x00000081;
@@ -222,7 +222,7 @@ phys_size_t initdram (int board_type)
 	size_b1 = 0x01000000;
 	size_b2 = 0x01000000;
 	size_b3 = 0x01000000;
-	memctl->memc_mptpr = CFG_MPTPR;
+	memctl->memc_mptpr = CONFIG_SYS_MPTPR;
 	udelay (1000);
 	memctl->memc_or1 = 0xFF000A00;
 	memctl->memc_br1 = 0x00000081;
@@ -251,7 +251,7 @@ phys_size_t initdram (int board_type)
 static long int dram_size (long int mamr_value, long int *base,
 			   long int maxsize)
 {
-	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
 	volatile memctl8xx_t *memctl = &immap->im_memctl;
 	volatile long int *addr;
 	ulong cnt, val;
@@ -294,7 +294,7 @@ static long int dram_size (long int mamr_value, long int *base,
 
 int misc_init_r (void)
 {
-	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
 
 #ifdef CONFIG_IDE_LED
 	/* Configure PA8 as output port */
diff --git a/board/kup/kup4x/u-boot.lds b/board/kup/kup4x/u-boot.lds
index 2e9169c16..120ca00fd 100644
--- a/board/kup/kup4x/u-boot.lds
+++ b/board/kup/kup4x/u-boot.lds
@@ -65,7 +65,7 @@ SECTIONS
     lib_generic/zlib.o		(.text)
 
     . = env_offset;
-    common/environment.o(.text)
+    common/env_embedded.o(.text)
 */
 
     *(.text)
@@ -137,6 +137,7 @@ SECTIONS
    *(.dynbss)
    *(.bss)
    *(COMMON)
+   . = ALIGN(4);
   }
   _end = . ;
   PROVIDE (end = .);
diff --git a/board/kup/kup4x/u-boot.lds.debug b/board/kup/kup4x/u-boot.lds.debug
index f6d153763..0f6ae696d 100644
--- a/board/kup/kup4x/u-boot.lds.debug
+++ b/board/kup/kup4x/u-boot.lds.debug
@@ -61,7 +61,7 @@ SECTIONS
     lib_generic/crc32.o		(.text)
 
     . = env_offset;
-    common/environment.o(.text)
+    common/env_embedded.o(.text)
 
     *(.text)
     *(.fixup)
diff --git a/board/lantec/flash.c b/board/lantec/flash.c
index 0faa82cba..97ed0542b 100644
--- a/board/lantec/flash.c
+++ b/board/lantec/flash.c
@@ -29,15 +29,15 @@
 #include <common.h>
 #include <mpc8xx.h>
 
-#if defined(CFG_ENV_IS_IN_FLASH)
-# ifndef  CFG_ENV_ADDR
-#  define CFG_ENV_ADDR	(CFG_FLASH_BASE + CFG_ENV_OFFSET)
+#if defined(CONFIG_ENV_IS_IN_FLASH)
+# ifndef  CONFIG_ENV_ADDR
+#  define CONFIG_ENV_ADDR	(CONFIG_SYS_FLASH_BASE + CONFIG_ENV_OFFSET)
 # endif
-# ifndef  CFG_ENV_SIZE
-#  define CFG_ENV_SIZE	CFG_ENV_SECT_SIZE
+# ifndef  CONFIG_ENV_SIZE
+#  define CONFIG_ENV_SIZE	CONFIG_ENV_SECT_SIZE
 # endif
-# ifndef  CFG_ENV_SECT_SIZE
-#  define CFG_ENV_SECT_SIZE  CFG_ENV_SIZE
+# ifndef  CONFIG_ENV_SECT_SIZE
+#  define CONFIG_ENV_SECT_SIZE  CONFIG_ENV_SIZE
 # endif
 #endif
 
@@ -51,7 +51,7 @@
 #endif
 /*---------------------------------------------------------------------*/
 
-flash_info_t	flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips	*/
+flash_info_t	flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips	*/
 
 /*-----------------------------------------------------------------------
  * Functions
@@ -65,13 +65,13 @@ static void flash_get_offsets (ulong base, flash_info_t *info);
 
 unsigned long flash_init (void)
 {
-	volatile immap_t     *immap  = (immap_t *)CFG_IMMR;
+	volatile immap_t     *immap  = (immap_t *)CONFIG_SYS_IMMR;
 	volatile memctl8xx_t *memctl = &immap->im_memctl;
 	unsigned long size_b0, size_b1;
 	int i;
 
 	/* Init: no FLASHes known */
-	for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) {
+	for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
 		flash_info[i].flash_id = FLASH_UNKNOWN;
 	}
 
@@ -116,65 +116,65 @@ unsigned long flash_init (void)
 		memctl->memc_br1, memctl->memc_or1);
 
 	/* Remap FLASH according to real size */
-	memctl->memc_or0 = CFG_OR_TIMING_FLASH | (-size_b0 & 0xFFFF8000);
-	memctl->memc_br0 = (CFG_FLASH_BASE & BR_BA_MSK) | \
+	memctl->memc_or0 = CONFIG_SYS_OR_TIMING_FLASH | (-size_b0 & 0xFFFF8000);
+	memctl->memc_br0 = (CONFIG_SYS_FLASH_BASE & BR_BA_MSK) | \
 				BR_MS_GPCM | BR_PS_32 | BR_V;
 
 	DEBUGF("## BR0: 0x%08x    OR0: 0x%08x\n",
 		memctl->memc_br0, memctl->memc_or0);
 
 	/* Re-do sizing to get full correct info */
-	size_b0 = flash_get_size((vu_long *)CFG_FLASH_BASE, &flash_info[0]);
+	size_b0 = flash_get_size((vu_long *)CONFIG_SYS_FLASH_BASE, &flash_info[0]);
 
-	flash_get_offsets (CFG_FLASH_BASE, &flash_info[0]);
+	flash_get_offsets (CONFIG_SYS_FLASH_BASE, &flash_info[0]);
 
 	flash_info[0].size = size_b0;
 
-#if CFG_MONITOR_BASE >= CFG_FLASH_BASE
+#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE
 	/* monitor protection ON by default */
 	flash_protect(FLAG_PROTECT_SET,
-		      CFG_MONITOR_BASE,
-		      CFG_MONITOR_BASE+monitor_flash_len-1,
+		      CONFIG_SYS_MONITOR_BASE,
+		      CONFIG_SYS_MONITOR_BASE+monitor_flash_len-1,
 		      &flash_info[0]);
 #endif
 
-#ifdef	CFG_ENV_IS_IN_FLASH
+#ifdef	CONFIG_ENV_IS_IN_FLASH
 	/* ENV protection ON by default */
 	flash_protect(FLAG_PROTECT_SET,
-		      CFG_ENV_ADDR,
-		      CFG_ENV_ADDR+CFG_ENV_SECT_SIZE-1,
+		      CONFIG_ENV_ADDR,
+		      CONFIG_ENV_ADDR+CONFIG_ENV_SECT_SIZE-1,
 		      &flash_info[0]);
 #endif
 
 	if (size_b1) {
-		memctl->memc_or5 = CFG_OR_TIMING_FLASH | (-size_b1 & 0xFFFF8000);
-		memctl->memc_br5 = ((CFG_FLASH_BASE + size_b0) & BR_BA_MSK) |
+		memctl->memc_or5 = CONFIG_SYS_OR_TIMING_FLASH | (-size_b1 & 0xFFFF8000);
+		memctl->memc_br5 = ((CONFIG_SYS_FLASH_BASE + size_b0) & BR_BA_MSK) |
 				    BR_MS_GPCM | BR_PS_32 | BR_V;
 
 		DEBUGF("## BR5: 0x%08x    OR5: 0x%08x\n",
 			memctl->memc_br5, memctl->memc_or5);
 
 		/* Re-do sizing to get full correct info */
-		size_b1 = flash_get_size((vu_long *)(CFG_FLASH_BASE + size_b0),
+		size_b1 = flash_get_size((vu_long *)(CONFIG_SYS_FLASH_BASE + size_b0),
 					  &flash_info[1]);
 
 		flash_info[1].size = size_b1;
 
-		flash_get_offsets (CFG_FLASH_BASE + size_b0, &flash_info[1]);
+		flash_get_offsets (CONFIG_SYS_FLASH_BASE + size_b0, &flash_info[1]);
 
-#if CFG_MONITOR_BASE >= CFG_FLASH_BASE
+#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE
 		/* monitor protection ON by default */
 		flash_protect(FLAG_PROTECT_SET,
-			      CFG_MONITOR_BASE,
-			      CFG_MONITOR_BASE+monitor_flash_len-1,
+			      CONFIG_SYS_MONITOR_BASE,
+			      CONFIG_SYS_MONITOR_BASE+monitor_flash_len-1,
 			      &flash_info[1]);
 #endif
 
-#ifdef	CFG_ENV_IS_IN_FLASH
+#ifdef	CONFIG_ENV_IS_IN_FLASH
 		/* ENV protection ON by default */
 		flash_protect(FLAG_PROTECT_SET,
-			      CFG_ENV_ADDR,
-			      CFG_ENV_ADDR+CFG_ENV_SECT_SIZE-1,
+			      CONFIG_ENV_ADDR,
+			      CONFIG_ENV_ADDR+CONFIG_ENV_SECT_SIZE-1,
 			      &flash_info[1]);
 #endif
 	} else {
@@ -491,7 +491,7 @@ int	flash_erase (flash_info_t *info, int s_first, int s_last)
 	last  = start;
 	addr = (vu_long*)(info->start[l_sect]);
 	while ((addr[0] & 0x00800080) != 0x00800080) {
-		if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+		if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
 			printf ("Timeout\n");
 			return 1;
 		}
@@ -614,7 +614,7 @@ static int write_word (flash_info_t *info, ulong dest, ulong data)
 	/* data polling for D7 */
 	start = get_timer (0);
 	while ((*((vu_long *)dest) & 0x00800080) != (data & 0x00800080)) {
-		if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+		if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
 			return (1);
 		}
 	}
diff --git a/board/lantec/lantec.c b/board/lantec/lantec.c
index 46f4da9e6..6d3486c48 100644
--- a/board/lantec/lantec.c
+++ b/board/lantec/lantec.c
@@ -111,7 +111,7 @@ int checkboard (void)
 
 phys_size_t initdram (int board_type)
 {
-	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
 	volatile memctl8xx_t *memctl = &immap->im_memctl;
 	long int size_b0;
 	int i;
@@ -122,7 +122,7 @@ phys_size_t initdram (int board_type)
 	upmconfig (UPMA, (uint *) sdram_table,
 		   sizeof (sdram_table) / sizeof (uint));
 
-	memctl->memc_mptpr = CFG_MPTPR_1BK_8K /* XXX CFG_MPTPR XXX */ ;
+	memctl->memc_mptpr = CONFIG_SYS_MPTPR_1BK_8K /* XXX CONFIG_SYS_MPTPR XXX */ ;
 
 	/* burst length=4, burst type=sequential, CAS latency=2 */
 	memctl->memc_mar = 0x00000088;
@@ -130,11 +130,11 @@ phys_size_t initdram (int board_type)
 	/*
 	 * Map controller bank 3 to the SDRAM bank at preliminary address.
 	 */
-	memctl->memc_or3 = CFG_OR3_PRELIM;
-	memctl->memc_br3 = CFG_BR3_PRELIM;
+	memctl->memc_or3 = CONFIG_SYS_OR3_PRELIM;
+	memctl->memc_br3 = CONFIG_SYS_BR3_PRELIM;
 
 	/* initialize memory address register */
-	memctl->memc_mamr = CFG_MAMR_8COL;	/* refresh not enabled yet */
+	memctl->memc_mamr = CONFIG_SYS_MAMR_8COL;	/* refresh not enabled yet */
 
 	/* mode initialization (offset 5) */
 	udelay (200);		/* 0x80006105 */
@@ -170,17 +170,17 @@ phys_size_t initdram (int board_type)
 	/*
 	 * Check Bank 0 Memory Size for re-configuration
 	 */
-	size_b0 = dram_size (CFG_MAMR_8COL,
+	size_b0 = dram_size (CONFIG_SYS_MAMR_8COL,
 			     (long *) SDRAM_BASE3_PRELIM, SDRAM_MAX_SIZE);
 
-	memctl->memc_mamr = CFG_MAMR_8COL | MAMR_PTAE;
+	memctl->memc_mamr = CONFIG_SYS_MAMR_8COL | MAMR_PTAE;
 
 	/*
 	 * Final mapping:
 	 */
 
-	memctl->memc_or3 = ((-size_b0) & 0xFFFF0000) | CFG_OR_TIMING_SDRAM;
-	memctl->memc_br3 = (CFG_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V;
+	memctl->memc_or3 = ((-size_b0) & 0xFFFF0000) | CONFIG_SYS_OR_TIMING_SDRAM;
+	memctl->memc_br3 = (CONFIG_SYS_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V;
 	udelay (1000);
 
 	return (size_b0);
@@ -199,7 +199,7 @@ phys_size_t initdram (int board_type)
 static long int dram_size (long int mamr_value, long int *base,
 			   long int maxsize)
 {
-	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
 	volatile memctl8xx_t *memctl = &immap->im_memctl;
 
 	memctl->memc_mamr = mamr_value;
diff --git a/board/lantec/u-boot.lds b/board/lantec/u-boot.lds
index 2d266434f..6028c2640 100644
--- a/board/lantec/u-boot.lds
+++ b/board/lantec/u-boot.lds
@@ -63,7 +63,7 @@ SECTIONS
     lib_generic/zlib.o		(.text)
 
     . = env_offset;
-    common/environment.o(.text)
+    common/env_embedded.o(.text)
 
     *(.text)
     *(.fixup)
@@ -134,6 +134,7 @@ SECTIONS
    *(.dynbss)
    *(.bss)
    *(COMMON)
+   . = ALIGN(4);
   }
   _end = . ;
   PROVIDE (end = .);
diff --git a/board/lantec/u-boot.lds.debug b/board/lantec/u-boot.lds.debug
index 7dc4408c6..d5e2c1d57 100644
--- a/board/lantec/u-boot.lds.debug
+++ b/board/lantec/u-boot.lds.debug
@@ -61,7 +61,7 @@ SECTIONS
     lib_generic/crc32.o		(.text)
 
     . = env_offset;
-    common/environment.o(.text)
+    common/env_embedded.o(.text)
 
     *(.text)
     *(.fixup)
diff --git a/board/lart/flash.c b/board/lart/flash.c
index 28c4531c0..29a331eff 100644
--- a/board/lart/flash.c
+++ b/board/lart/flash.c
@@ -41,7 +41,7 @@ extern u32 data_to_flash(u32);
 #define PUZZLE_FROM_FLASH(x)	data_from_flash((x))
 #define PUZZLE_TO_FLASH(x)	data_to_flash((x))
 
-flash_info_t    flash_info[CFG_MAX_FLASH_BANKS];
+flash_info_t    flash_info[CONFIG_SYS_MAX_FLASH_BANKS];
 
 
 #define CMD_READ_ARRAY		0x00FF00FF
@@ -74,15 +74,15 @@ ulong flash_init(void)
     int i, j;
     ulong size = 0;
 
-    for (i = 0; i < CFG_MAX_FLASH_BANKS; i++)
+    for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++)
     {
 	ulong flashbase = 0;
 	flash_info[i].flash_id =
 	  (INTEL_MANUFACT & FLASH_VENDMASK) |
 	  (INTEL_ID_28F160F3B & FLASH_TYPEMASK);
 	flash_info[i].size = FLASH_BANK_SIZE;
-	flash_info[i].sector_count = CFG_MAX_FLASH_SECT;
-	memset(flash_info[i].protect, 0, CFG_MAX_FLASH_SECT);
+	flash_info[i].sector_count = CONFIG_SYS_MAX_FLASH_SECT;
+	memset(flash_info[i].protect, 0, CONFIG_SYS_MAX_FLASH_SECT);
 	if (i == 0)
 	  flashbase = PHYS_FLASH_1;
 	else
@@ -104,13 +104,13 @@ ulong flash_init(void)
     /* Protect monitor and environment sectors
      */
     flash_protect(FLAG_PROTECT_SET,
-		  CFG_FLASH_BASE,
-		  CFG_FLASH_BASE + monitor_flash_len - 1,
+		  CONFIG_SYS_FLASH_BASE,
+		  CONFIG_SYS_FLASH_BASE + monitor_flash_len - 1,
 		  &flash_info[0]);
 
     flash_protect(FLAG_PROTECT_SET,
-		  CFG_ENV_ADDR,
-		  CFG_ENV_ADDR + CFG_ENV_SIZE - 1,
+		  CONFIG_ENV_ADDR,
+		  CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1,
 		  &flash_info[0]);
 
     return size;
@@ -305,7 +305,7 @@ int	flash_erase (flash_info_t *info, int s_first, int s_last)
 	    do
 	    {
 		/* check timeout */
-		if (get_timer_masked() > CFG_FLASH_ERASE_TOUT)
+		if (get_timer_masked() > CONFIG_SYS_FLASH_ERASE_TOUT)
 		{
 		    *addr = PUZZLE_TO_FLASH(CMD_SUSPEND);
 		    result = BIT_TIMEOUT;
@@ -383,7 +383,7 @@ static int write_word (flash_info_t *info, ulong dest, ulong data)
     do
     {
 	/* check timeout */
-	if (get_timer_masked() > CFG_FLASH_ERASE_TOUT)
+	if (get_timer_masked() > CONFIG_SYS_FLASH_ERASE_TOUT)
 	{
 	    *addr = PUZZLE_TO_FLASH(CMD_SUSPEND);
 	    result = BIT_TIMEOUT;
diff --git a/board/lart/u-boot.lds b/board/lart/u-boot.lds
index 6bd06270a..fce2533ce 100644
--- a/board/lart/u-boot.lds
+++ b/board/lart/u-boot.lds
@@ -51,6 +51,6 @@ SECTIONS
 
 	. = ALIGN(4);
 	__bss_start = .;
-	.bss (NOLOAD) : { *(.bss) }
+	.bss (NOLOAD) : { *(.bss) . = ALIGN(4); }
 	_end = .;
 }
diff --git a/board/linkstation/avr.c b/board/linkstation/avr.c
index a689c6330..fda1b913e 100644
--- a/board/linkstation/avr.c
+++ b/board/linkstation/avr.c
@@ -79,8 +79,8 @@ static char envbuffer[16];
 
 void init_AVR_DUART (void)
 {
-	NS16550_t AVR_port = (NS16550_t) CFG_NS16550_COM2;
-	int clock_divisor = CFG_NS16550_CLK / 16 / 9600;
+	NS16550_t AVR_port = (NS16550_t) CONFIG_SYS_NS16550_COM2;
+	int clock_divisor = CONFIG_SYS_NS16550_CLK / 16 / 9600;
 
 	/*
 	 * AVR port init sequence taken from
@@ -105,12 +105,12 @@ void init_AVR_DUART (void)
 
 static inline int avr_tstc(void)
 {
-	return (NS16550_tstc((NS16550_t)CFG_NS16550_COM2));
+	return (NS16550_tstc((NS16550_t)CONFIG_SYS_NS16550_COM2));
 }
 
 static inline char avr_getc(void)
 {
-	return (NS16550_getc((NS16550_t)CFG_NS16550_COM2));
+	return (NS16550_getc((NS16550_t)CONFIG_SYS_NS16550_COM2));
 }
 
 static int push_timeout(char button_code)
diff --git a/board/linkstation/hwctl.c b/board/linkstation/hwctl.c
index 2e5b5c83a..9fd56ae23 100644
--- a/board/linkstation/hwctl.c
+++ b/board/linkstation/hwctl.c
@@ -21,7 +21,7 @@
 
 #define mdelay(n)	udelay((n)*1000)
 
-#define AVR_PORT CFG_NS16550_COM2
+#define AVR_PORT CONFIG_SYS_NS16550_COM2
 
 /* 2005.5.10 BUFFALO add */
 /*--------------------------------------------------------------*/
diff --git a/board/linkstation/ide.c b/board/linkstation/ide.c
index 02086a003..2c89d62f6 100644
--- a/board/linkstation/ide.c
+++ b/board/linkstation/ide.c
@@ -37,7 +37,7 @@
 #define IT8212_PCI_IdeBusSkewCONTROL	0x4c
 #define IT8212_PCI_IdeDrivingCURRENT	0x42
 
-extern ulong ide_bus_offset[CFG_IDE_MAXBUS];
+extern ulong ide_bus_offset[CONFIG_SYS_IDE_MAXBUS];
 extern struct pci_controller hose;
 
 int ide_preinit (void)
@@ -47,7 +47,7 @@ int ide_preinit (void)
 	int l;
 
 	status = 1;
-	for (l = 0; l < CFG_IDE_MAXBUS; l++) {
+	for (l = 0; l < CONFIG_SYS_IDE_MAXBUS; l++) {
 		ide_bus_offset[l] = -ATA_STATUS;
 	}
 	devbusfn = pci_find_device(PCI_VENDOR_ID_CMD, PCI_DEVICE_ID_SII_680, 0);
diff --git a/board/linkstation/linkstation.c b/board/linkstation/linkstation.c
index 241cf032d..c0d43eb33 100644
--- a/board/linkstation/linkstation.c
+++ b/board/linkstation/linkstation.c
@@ -26,6 +26,7 @@
 #include <mpc824x.h>
 #include <asm/io.h>
 #include <ns16550.h>
+#include <netdev.h>
 
 #ifdef CONFIG_PCI
 #include <pci.h>
@@ -52,7 +53,7 @@ int checkboard (void)
 
 phys_size_t initdram (int board_type)
 {
-	return (get_ram_size(CFG_SDRAM_BASE, CFG_MAX_RAM_SIZE));
+	return (get_ram_size(CONFIG_SYS_SDRAM_BASE, CONFIG_SYS_MAX_RAM_SIZE));
 }
 
 /*
@@ -128,3 +129,8 @@ int board_early_init_f (void)
 	out_8((volatile u8*)UART_DCR, 1);
 	return 0;
 }
+
+int board_eth_init(bd_t *bis)
+{
+	return pci_eth_init(bis);
+}
diff --git a/board/logodl/flash.c b/board/logodl/flash.c
index 0807b8091..593943ffd 100644
--- a/board/logodl/flash.c
+++ b/board/logodl/flash.c
@@ -28,7 +28,7 @@
 #define FLASH_BANK_SIZE 0x1000000
 #define MAIN_SECT_SIZE  0x20000		/* 2x64k = 128k per sector */
 
-flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips	*/
+flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips	*/
 
 /* NOTE - CONFIG_FLASH_16BIT means the CPU interface is 16-bit, it
  *        has nothing to do with the flash chip being 8-bit or 16-bit.
@@ -59,7 +59,7 @@ static int write_word_intel(flash_info_t *info, FPWV *dest, FPW data);
 static int write_word_amd(flash_info_t *info, FPWV *dest, FPW data);
 #define write_word(in, de, da)   write_word_amd(in, de, da)
 static void flash_get_offsets(ulong base, flash_info_t *info);
-#ifdef CFG_FLASH_PROTECTION
+#ifdef CONFIG_SYS_FLASH_PROTECTION
 static void flash_sync_real_protect(flash_info_t *info);
 #endif
 
@@ -73,15 +73,15 @@ ulong flash_init(void)
     int i, j;
     ulong size = 0;
 
-    for (i = 0; i < CFG_MAX_FLASH_BANKS; i++)
+    for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++)
     {
 	ulong flashbase = 0;
 	flash_info[i].flash_id =
 	  (FLASH_MAN_AMD & FLASH_VENDMASK) |
 	  (FLASH_AM640U & FLASH_TYPEMASK);
 	flash_info[i].size = FLASH_BANK_SIZE;
-	flash_info[i].sector_count = CFG_MAX_FLASH_SECT;
-	memset(flash_info[i].protect, 0, CFG_MAX_FLASH_SECT);
+	flash_info[i].sector_count = CONFIG_SYS_MAX_FLASH_SECT;
+	memset(flash_info[i].protect, 0, CONFIG_SYS_MAX_FLASH_SECT);
 	switch (i)
 	{
 	   case 0:
@@ -104,13 +104,13 @@ ulong flash_init(void)
     /* Protect monitor and environment sectors
      */
     flash_protect(FLAG_PROTECT_SET,
-		  CFG_FLASH_BASE,
-		  CFG_FLASH_BASE + _bss_start - _armboot_start,
+		  CONFIG_SYS_FLASH_BASE,
+		  CONFIG_SYS_FLASH_BASE + _bss_start - _armboot_start,
 		  &flash_info[0]);
 
     flash_protect(FLAG_PROTECT_SET,
-		  CFG_ENV_ADDR,
-		  CFG_ENV_ADDR + CFG_ENV_SIZE - 1,
+		  CONFIG_ENV_ADDR,
+		  CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1,
 		  &flash_info[0]);
 
     return size;
@@ -373,7 +373,7 @@ ulong flash_get_size (FPWV *addr, flash_info_t *info)
 	return (info->size);
 }
 
-#ifdef CFG_FLASH_PROTECTION
+#ifdef CONFIG_SYS_FLASH_PROTECTION
 /*-----------------------------------------------------------------------
  */
 
@@ -510,7 +510,7 @@ int	flash_erase (flash_info_t *info, int s_first, int s_last)
 		udelay (1000);
 
 		while ((*addr & (FPW)0x00800080) != (FPW)0x00800080) {
-			if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+			if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
 				printf ("Timeout\n");
 
 				if (intel) {
@@ -703,7 +703,7 @@ static int write_word_amd (flash_info_t *info, FPWV *dest, FPW data)
 
     /* data polling for D7 */
     while (res == 0 && (*dest & (FPW)0x00800080) != (data & (FPW)0x00800080)) {
-	if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+	if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
 	    *dest = (FPW)0x00F000F0;	/* reset bank */
 	    res = 1;
 	}
@@ -749,7 +749,7 @@ static int write_word_intel (flash_info_t *info, FPWV *dest, FPW data)
     start = get_timer (0);
 
     while (res == 0 && (*dest & (FPW)0x00800080) != (FPW)0x00800080) {
-	if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+	if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
 	    *dest = (FPW)0x00B000B0;	/* Suspend program	*/
 	    res = 1;
 	}
@@ -764,7 +764,7 @@ static int write_word_intel (flash_info_t *info, FPWV *dest, FPW data)
     return (res);
 }
 
-#ifdef CFG_FLASH_PROTECTION
+#ifdef CONFIG_SYS_FLASH_PROTECTION
 /*-----------------------------------------------------------------------
  */
 int flash_real_protect (flash_info_t * info, long sector, int prot)
diff --git a/board/logodl/logodl.c b/board/logodl/logodl.c
index 897787bcf..c57210a95 100644
--- a/board/logodl/logodl.c
+++ b/board/logodl/logodl.c
@@ -77,17 +77,17 @@ void logodl_set_led(int led, int state)
 
 	case 0:
 		if (state==1) {
-			CFG_LED_A_CR = CFG_LED_A_BIT;
+			CONFIG_SYS_LED_A_CR = CONFIG_SYS_LED_A_BIT;
 		} else if (state==0) {
-			CFG_LED_A_SR = CFG_LED_A_BIT;
+			CONFIG_SYS_LED_A_SR = CONFIG_SYS_LED_A_BIT;
 		}
 		break;
 
 	case 1:
 		if (state==1) {
-			CFG_LED_B_CR = CFG_LED_B_BIT;
+			CONFIG_SYS_LED_B_CR = CONFIG_SYS_LED_B_BIT;
 		} else if (state==0) {
-			CFG_LED_B_SR = CFG_LED_B_BIT;
+			CONFIG_SYS_LED_B_SR = CONFIG_SYS_LED_B_BIT;
 		}
 		break;
 	}
diff --git a/board/logodl/lowlevel_init.S b/board/logodl/lowlevel_init.S
index 4c9f10ffb..9892430a1 100644
--- a/board/logodl/lowlevel_init.S
+++ b/board/logodl/lowlevel_init.S
@@ -29,7 +29,7 @@
 #include <version.h>
 #include <asm/arch/pxa-regs.h>
 
-DRAM_SIZE:  .long   CFG_DRAM_SIZE
+DRAM_SIZE:  .long   CONFIG_SYS_DRAM_SIZE
 
 /* wait for coprocessor write complete */
    .macro CPWAIT reg
@@ -54,71 +54,71 @@ lowlevel_init:
 	/* Set up GPIO pins first ----------------------------------------- */
 
 	ldr		r0,	=GPSR0
-	ldr		r1,	=CFG_GPSR0_VAL
+	ldr		r1,	=CONFIG_SYS_GPSR0_VAL
 	str		r1,   [r0]
 
 	ldr		r0,	=GPSR1
-	ldr		r1,	=CFG_GPSR1_VAL
+	ldr		r1,	=CONFIG_SYS_GPSR1_VAL
 	str		r1,   [r0]
 
 	ldr		r0,	=GPSR2
-	ldr		r1,	=CFG_GPSR2_VAL
+	ldr		r1,	=CONFIG_SYS_GPSR2_VAL
 	str		r1,   [r0]
 
 	ldr		r0,	=GPCR0
-	ldr		r1,	=CFG_GPCR0_VAL
+	ldr		r1,	=CONFIG_SYS_GPCR0_VAL
 	str		r1,   [r0]
 
 	ldr		r0,	=GPCR1
-	ldr		r1,	=CFG_GPCR1_VAL
+	ldr		r1,	=CONFIG_SYS_GPCR1_VAL
 	str		r1,   [r0]
 
 	ldr		r0,	=GPCR2
-	ldr		r1,	=CFG_GPCR2_VAL
+	ldr		r1,	=CONFIG_SYS_GPCR2_VAL
 	str		r1,   [r0]
 
 	ldr		r0,	=GPDR0
-	ldr		r1,	=CFG_GPDR0_VAL
+	ldr		r1,	=CONFIG_SYS_GPDR0_VAL
 	str		r1,   [r0]
 
 	ldr		r0,	=GPDR1
-	ldr		r1,	=CFG_GPDR1_VAL
+	ldr		r1,	=CONFIG_SYS_GPDR1_VAL
 	str		r1,   [r0]
 
 	ldr		r0,	=GPDR2
-	ldr		r1,	=CFG_GPDR2_VAL
+	ldr		r1,	=CONFIG_SYS_GPDR2_VAL
 	str		r1,   [r0]
 
 	ldr		r0,	=GAFR0_L
-	ldr		r1,	=CFG_GAFR0_L_VAL
+	ldr		r1,	=CONFIG_SYS_GAFR0_L_VAL
 	str		r1,   [r0]
 
 	ldr		r0,	=GAFR0_U
-	ldr		r1,	=CFG_GAFR0_U_VAL
+	ldr		r1,	=CONFIG_SYS_GAFR0_U_VAL
 	str		r1,   [r0]
 
 	ldr		r0,	=GAFR1_L
-	ldr		r1,	=CFG_GAFR1_L_VAL
+	ldr		r1,	=CONFIG_SYS_GAFR1_L_VAL
 	str		r1,   [r0]
 
 	ldr		r0,	=GAFR1_U
-	ldr		r1,	=CFG_GAFR1_U_VAL
+	ldr		r1,	=CONFIG_SYS_GAFR1_U_VAL
 	str		r1,   [r0]
 
 	ldr		r0,	=GAFR2_L
-	ldr		r1,	=CFG_GAFR2_L_VAL
+	ldr		r1,	=CONFIG_SYS_GAFR2_L_VAL
 	str		r1,   [r0]
 
 	ldr		r0,	=GAFR2_U
-	ldr		r1,	=CFG_GAFR2_U_VAL
+	ldr		r1,	=CONFIG_SYS_GAFR2_U_VAL
 	str		r1,   [r0]
 
 	ldr	r0,	=PSSR		/* enable GPIO pins */
-	ldr		r1,	=CFG_PSSR_VAL
+	ldr		r1,	=CONFIG_SYS_PSSR_VAL
 	str		r1,   [r0]
 
 /*	ldr	r3,	=MSC1		/  low - bank 2 Lubbock Registers / SRAM */
-/*	ldr	r2,	=CFG_MSC1_VAL	/  high - bank 3 Ethernet Controller */
+/*	ldr	r2,	=CONFIG_SYS_MSC1_VAL	/  high - bank 3 Ethernet Controller */
 /*	str	r2,	[r3]		/  need to set MSC1 before trying to write to the HEX LEDs */
 /*	ldr	r2,	[r3]		/  need to read it back to make sure the value latches (see MSC section of manual) */
 /* */
@@ -168,17 +168,17 @@ mem_init:
 	/* MSC registers: timing, bus width, mem type                       */
 
 	/* MSC0: nCS(0,1)                                                   */
-	ldr     r2,   =CFG_MSC0_VAL
+	ldr     r2,   =CONFIG_SYS_MSC0_VAL
 	str     r2,   [r1, #MSC0_OFFSET]
 	ldr     r2,   [r1, #MSC0_OFFSET]	/* read back to ensure      */
 						/* that data latches        */
 	/* MSC1: nCS(2,3)                                                   */
-	ldr     r2,  =CFG_MSC1_VAL
+	ldr     r2,  =CONFIG_SYS_MSC1_VAL
 	str     r2,  [r1, #MSC1_OFFSET]
 	ldr     r2,  [r1, #MSC1_OFFSET]
 
 	/* MSC2: nCS(4,5)                                                   */
-	ldr     r2,  =CFG_MSC2_VAL
+	ldr     r2,  =CONFIG_SYS_MSC2_VAL
 	str     r2,  [r1, #MSC2_OFFSET]
 	ldr     r2,  [r1, #MSC2_OFFSET]
 
@@ -187,37 +187,37 @@ mem_init:
 	/* ---------------------------------------------------------------- */
 
 	/* MECR: Memory Expansion Card Register                             */
-	ldr     r2,  =CFG_MECR_VAL
+	ldr     r2,  =CONFIG_SYS_MECR_VAL
 	str     r2,  [r1, #MECR_OFFSET]
 	ldr	r2,	[r1, #MECR_OFFSET]
 
 	/* MCMEM0: Card Interface slot 0 timing                             */
-	ldr     r2,  =CFG_MCMEM0_VAL
+	ldr     r2,  =CONFIG_SYS_MCMEM0_VAL
 	str     r2,  [r1, #MCMEM0_OFFSET]
 	ldr	r2,	[r1, #MCMEM0_OFFSET]
 
 	/* MCMEM1: Card Interface slot 1 timing                             */
-	ldr     r2,  =CFG_MCMEM1_VAL
+	ldr     r2,  =CONFIG_SYS_MCMEM1_VAL
 	str     r2,  [r1, #MCMEM1_OFFSET]
 	ldr	r2,	[r1, #MCMEM1_OFFSET]
 
 	/* MCATT0: Card Interface Attribute Space Timing, slot 0            */
-	ldr     r2,  =CFG_MCATT0_VAL
+	ldr     r2,  =CONFIG_SYS_MCATT0_VAL
 	str     r2,  [r1, #MCATT0_OFFSET]
 	ldr	r2,	[r1, #MCATT0_OFFSET]
 
 	/* MCATT1: Card Interface Attribute Space Timing, slot 1            */
-	ldr     r2,  =CFG_MCATT1_VAL
+	ldr     r2,  =CONFIG_SYS_MCATT1_VAL
 	str     r2,  [r1, #MCATT1_OFFSET]
 	ldr	r2,	[r1, #MCATT1_OFFSET]
 
 	/* MCIO0: Card Interface I/O Space Timing, slot 0                   */
-	ldr     r2,  =CFG_MCIO0_VAL
+	ldr     r2,  =CONFIG_SYS_MCIO0_VAL
 	str     r2,  [r1, #MCIO0_OFFSET]
 	ldr	r2,	[r1, #MCIO0_OFFSET]
 
 	/* MCIO1: Card Interface I/O Space Timing, slot 1                   */
-	ldr     r2,  =CFG_MCIO1_VAL
+	ldr     r2,  =CONFIG_SYS_MCIO1_VAL
 	str     r2,  [r1, #MCIO1_OFFSET]
 	ldr	r2,	[r1, #MCIO1_OFFSET]
 
@@ -239,7 +239,7 @@ mem_init:
 	/* Before accessing MDREFR we need a valid DRI field, so we set     */
 	/* this to power on defaults + DRI field.                           */
 
-	ldr	r3,	=CFG_MDREFR_VAL
+	ldr	r3,	=CONFIG_SYS_MDREFR_VAL
 	ldr	r2,	=0xFFF
 	and	r3,	r3, r2
 	ldr	r4,	=0x03ca4000
@@ -269,7 +269,7 @@ mem_init:
 	/* Step 4a: assert MDREFR:K?RUN and configure                       */
 	/*          MDREFR:K1DB2 and MDREFR:K2DB2 as desired.               */
 
-	ldr	r4,	=CFG_MDREFR_VAL
+	ldr	r4,	=CONFIG_SYS_MDREFR_VAL
 	str	r4,	[r1, #MDREFR_OFFSET]	/* write back MDREFR        */
 	ldr	r4,	[r1, #MDREFR_OFFSET]
 
@@ -292,7 +292,7 @@ mem_init:
 	/* Step 4d: write MDCNFG with MDCNFG:DEx deasserted (set to 0), to  */
 	/*          configure but not enable each SDRAM partition pair.     */
 
-	ldr	r4,	=CFG_MDCNFG_VAL
+	ldr	r4,	=CONFIG_SYS_MDCNFG_VAL
 	bic	r4,	r4,	#(MDCNFG_DE0|MDCNFG_DE1)
 
 	str     r4,     [r1, #MDCNFG_OFFSET]	/* write back MDCNFG        */
@@ -325,7 +325,7 @@ mem_init:
 	/*          Jan 2003, Errata #116, page 30.                         */
 
 
-	ldr	r3,	=CFG_DRAM_BASE
+	ldr	r3,	=CONFIG_SYS_DRAM_BASE
 	str	r2, [r3]
 	str	r2, [r3]
 	str	r2, [r3]
@@ -345,7 +345,7 @@ mem_init:
 
 	/* Step 4h: Write MDMRS.                                            */
 
-	ldr     r2,  =CFG_MDMRS_VAL
+	ldr     r2,  =CONFIG_SYS_MDMRS_VAL
 	str     r2,  [r1, #MDMRS_OFFSET]
 
 
diff --git a/board/logodl/u-boot.lds b/board/logodl/u-boot.lds
index 14d264a68..7cf9fdf63 100644
--- a/board/logodl/u-boot.lds
+++ b/board/logodl/u-boot.lds
@@ -51,6 +51,6 @@ SECTIONS
 
 	. = ALIGN(4);
 	__bss_start = .;
-	.bss (NOLOAD) : { *(.bss) }
+	.bss (NOLOAD) : { *(.bss) . = ALIGN(4); }
 	_end = .;
 }
diff --git a/board/lpc2292sodimm/flash.c b/board/lpc2292sodimm/flash.c
index 0fb08430c..a7e175d8e 100644
--- a/board/lpc2292sodimm/flash.c
+++ b/board/lpc2292sodimm/flash.c
@@ -28,7 +28,7 @@
 #define SST_ADDR2 ((volatile ushort*)(SST_BASEADDR + (0x2AAA << 1)))
 
 
-flash_info_t flash_info[CFG_MAX_FLASH_BANKS];
+flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];
 
 extern int lpc2292_copy_buffer_to_flash(flash_info_t *, ulong);
 extern int lpc2292_flash_erase(flash_info_t *, int, int);
@@ -97,8 +97,8 @@ ulong flash_init (void)
 		 &flash_info[0]);
 
 	flash_protect (FLAG_PROTECT_SET,
-		 CFG_ENV_ADDR,
-		 CFG_ENV_ADDR + CFG_ENV_SIZE - 1,
+		 CONFIG_ENV_ADDR,
+		 CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1,
 		 &flash_info[0]);
 
 	return size;
diff --git a/board/lpc2292sodimm/u-boot.lds b/board/lpc2292sodimm/u-boot.lds
index 418101ff8..49d18f7d6 100644
--- a/board/lpc2292sodimm/u-boot.lds
+++ b/board/lpc2292sodimm/u-boot.lds
@@ -50,6 +50,6 @@ SECTIONS
 
 	. = ALIGN(4);
 	__bss_start = .;
-	.bss (NOLOAD) : { *(.bss) }
+	.bss (NOLOAD) : { *(.bss) . = ALIGN(4); }
 	_end = .;
 }
diff --git a/board/lpd7a40x/flash.c b/board/lpd7a40x/flash.c
index d18720e5b..e3558d217 100644
--- a/board/lpd7a40x/flash.c
+++ b/board/lpd7a40x/flash.c
@@ -33,7 +33,7 @@
 #define FLASH_BANK_SIZE 0x1000000	/* 16MB (2 x 8 MB) */
 #define MAIN_SECT_SIZE  0x40000		/* 256KB (2 x 128kB) */
 
-flash_info_t flash_info[CFG_MAX_FLASH_BANKS];
+flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];
 
 
 #define CMD_READ_ARRAY		0x00FF00FF
@@ -66,17 +66,17 @@ ulong flash_init (void)
 	int i, j;
 	ulong size = 0;
 
-	for (i = 0; i < CFG_MAX_FLASH_BANKS; i++) {
+	for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) {
 		ulong flashbase = 0;
 
 		flash_info[i].flash_id =
 			(INTEL_MANUFACT     & FLASH_VENDMASK) |
 			(INTEL_ID_28F640J3A & FLASH_TYPEMASK);
 		flash_info[i].size = FLASH_BANK_SIZE;
-		flash_info[i].sector_count = CFG_MAX_FLASH_SECT;
-		memset (flash_info[i].protect, 0, CFG_MAX_FLASH_SECT);
+		flash_info[i].sector_count = CONFIG_SYS_MAX_FLASH_SECT;
+		memset (flash_info[i].protect, 0, CONFIG_SYS_MAX_FLASH_SECT);
 		if (i == 0)
-			flashbase = CFG_FLASH_BASE;
+			flashbase = CONFIG_SYS_FLASH_BASE;
 		else
 			panic ("configured too many flash banks!\n");
 		for (j = 0; j < flash_info[i].sector_count; j++) {
@@ -92,18 +92,18 @@ ulong flash_init (void)
 	 * Protect monitor and environment sectors
 	 */
 	flash_protect ( FLAG_PROTECT_SET,
-			CFG_FLASH_BASE,
-			CFG_FLASH_BASE + monitor_flash_len - 1,
+			CONFIG_SYS_FLASH_BASE,
+			CONFIG_SYS_FLASH_BASE + monitor_flash_len - 1,
 			&flash_info[0]);
 
 	flash_protect ( FLAG_PROTECT_SET,
-			CFG_ENV_ADDR,
-			CFG_ENV_ADDR + CFG_ENV_SIZE - 1, &flash_info[0]);
+			CONFIG_ENV_ADDR,
+			CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1, &flash_info[0]);
 
-#ifdef CFG_ENV_ADDR_REDUND
+#ifdef CONFIG_ENV_ADDR_REDUND
 	flash_protect ( FLAG_PROTECT_SET,
-			CFG_ENV_ADDR_REDUND,
-			CFG_ENV_ADDR_REDUND + CFG_ENV_SIZE_REDUND - 1,
+			CONFIG_ENV_ADDR_REDUND,
+			CONFIG_ENV_ADDR_REDUND + CONFIG_ENV_SIZE_REDUND - 1,
 			&flash_info[0]);
 #endif
 
@@ -297,7 +297,7 @@ int flash_erase (flash_info_t * info, int s_first, int s_last)
 			/* wait until flash is ready */
 			do {
 				/* check timeout */
-				if (get_timer_masked () > CFG_FLASH_ERASE_TOUT) {
+				if (get_timer_masked () > CONFIG_SYS_FLASH_ERASE_TOUT) {
 					*addr = CMD_STATUS_RESET;
 					result = BIT_TIMEOUT;
 					break;
@@ -392,7 +392,7 @@ static int write_word (flash_info_t * info, ulong dest, ulong data)
 	/* wait until flash is ready */
 	do {
 		/* check timeout */
-		if (get_timer_masked () > CFG_FLASH_ERASE_TOUT) {
+		if (get_timer_masked () > CONFIG_SYS_FLASH_ERASE_TOUT) {
 			*addr = CMD_SUSPEND;
 			result = BIT_TIMEOUT;
 			break;
diff --git a/board/lpd7a40x/u-boot.lds b/board/lpd7a40x/u-boot.lds
index b5f8ff919..3c14437ec 100644
--- a/board/lpd7a40x/u-boot.lds
+++ b/board/lpd7a40x/u-boot.lds
@@ -52,6 +52,6 @@ SECTIONS
 
 	. = ALIGN(4);
 	__bss_start = .;
-	.bss (NOLOAD) : { *(.bss) }
+	.bss (NOLOAD) : { *(.bss) . = ALIGN(4); }
 	_end = .;
 }
diff --git a/board/lubbock/flash.c b/board/lubbock/flash.c
index ba82892dd..a4b201e01 100644
--- a/board/lubbock/flash.c
+++ b/board/lubbock/flash.c
@@ -28,7 +28,7 @@
 #include <linux/byteorder/swab.h>
 
 
-flash_info_t flash_info[CFG_MAX_FLASH_BANKS];	/* info for FLASH chips    */
+flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];	/* info for FLASH chips    */
 
 /* Board support for 1 or 2 flash devices */
 #define FLASH_PORT_WIDTH32
@@ -65,7 +65,7 @@ unsigned long flash_init (void)
 	int i;
 	ulong size = 0;
 
-	for (i = 0; i < CFG_MAX_FLASH_BANKS; i++) {
+	for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) {
 		switch (i) {
 		case 0:
 			flash_get_size ((FPW *) PHYS_FLASH_1, &flash_info[i]);
@@ -85,13 +85,13 @@ unsigned long flash_init (void)
 	/* Protect monitor and environment sectors
 	 */
 	flash_protect ( FLAG_PROTECT_SET,
-			CFG_FLASH_BASE,
-			CFG_FLASH_BASE + monitor_flash_len - 1,
+			CONFIG_SYS_FLASH_BASE,
+			CONFIG_SYS_FLASH_BASE + monitor_flash_len - 1,
 			&flash_info[0] );
 
 	flash_protect ( FLAG_PROTECT_SET,
-			CFG_ENV_ADDR,
-			CFG_ENV_ADDR + CFG_ENV_SIZE - 1, &flash_info[0] );
+			CONFIG_ENV_ADDR,
+			CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1, &flash_info[0] );
 
 	return size;
 }
@@ -203,10 +203,10 @@ static ulong flash_get_size (FPW *addr, flash_info_t *info)
 		break;
 	}
 
-	if (info->sector_count > CFG_MAX_FLASH_SECT) {
+	if (info->sector_count > CONFIG_SYS_MAX_FLASH_SECT) {
 		printf ("** ERROR: sector count %d > max (%d) **\n",
-			info->sector_count, CFG_MAX_FLASH_SECT);
-		info->sector_count = CFG_MAX_FLASH_SECT;
+			info->sector_count, CONFIG_SYS_MAX_FLASH_SECT);
+		info->sector_count = CONFIG_SYS_MAX_FLASH_SECT;
 	}
 
 	addr[0] = (FPW) 0x00FF00FF;		/* restore read mode */
@@ -276,7 +276,7 @@ int flash_erase (flash_info_t *info, int s_first, int s_last)
 			*addr = (FPW) 0x00D000D0;	/* erase confirm */
 
 			while (((status = *addr) & (FPW) 0x00800080) != (FPW) 0x00800080) {
-				if (get_timer_masked () > CFG_FLASH_ERASE_TOUT) {
+				if (get_timer_masked () > CONFIG_SYS_FLASH_ERASE_TOUT) {
 					printf ("Timeout\n");
 					*addr = (FPW) 0x00B000B0;	/* suspend erase     */
 					*addr = (FPW) 0x00FF00FF;	/* reset to read mode */
@@ -410,7 +410,7 @@ static int write_data (flash_info_t *info, ulong dest, FPW data)
 
 	/* wait while polling the status register */
 	while (((status = *addr) & (FPW) 0x00800080) != (FPW) 0x00800080) {
-		if (get_timer_masked () > CFG_FLASH_WRITE_TOUT) {
+		if (get_timer_masked () > CONFIG_SYS_FLASH_WRITE_TOUT) {
 			*addr = (FPW) 0x00FF00FF;	/* restore read mode */
 			return (1);
 		}
diff --git a/board/lubbock/lowlevel_init.S b/board/lubbock/lowlevel_init.S
index 2a9bcbf49..db6f69d36 100644
--- a/board/lubbock/lowlevel_init.S
+++ b/board/lubbock/lowlevel_init.S
@@ -29,7 +29,7 @@
 #include <version.h>
 #include <asm/arch/pxa-regs.h>
 
-DRAM_SIZE:  .long   CFG_DRAM_SIZE
+DRAM_SIZE:  .long   CONFIG_SYS_DRAM_SIZE
 
 /* wait for coprocessor write complete */
    .macro CPWAIT reg
@@ -51,67 +51,67 @@ lowlevel_init:
 	/* Set up GPIO pins first ----------------------------------------- */
 
 	ldr		r0,	=GPSR0
-	ldr		r1,	=CFG_GPSR0_VAL
+	ldr		r1,	=CONFIG_SYS_GPSR0_VAL
 	str		r1,   [r0]
 
 	ldr		r0,	=GPSR1
-	ldr		r1,	=CFG_GPSR1_VAL
+	ldr		r1,	=CONFIG_SYS_GPSR1_VAL
 	str		r1,   [r0]
 
 	ldr		r0,	=GPSR2
-	ldr		r1,	=CFG_GPSR2_VAL
+	ldr		r1,	=CONFIG_SYS_GPSR2_VAL
 	str		r1,   [r0]
 
 	ldr		r0,	=GPCR0
-	ldr		r1,	=CFG_GPCR0_VAL
+	ldr		r1,	=CONFIG_SYS_GPCR0_VAL
 	str		r1,   [r0]
 
 	ldr		r0,	=GPCR1
-	ldr		r1,	=CFG_GPCR1_VAL
+	ldr		r1,	=CONFIG_SYS_GPCR1_VAL
 	str		r1,   [r0]
 
 	ldr		r0,	=GPCR2
-	ldr		r1,	=CFG_GPCR2_VAL
+	ldr		r1,	=CONFIG_SYS_GPCR2_VAL
 	str		r1,   [r0]
 
 	ldr		r0,	=GPDR0
-	ldr		r1,	=CFG_GPDR0_VAL
+	ldr		r1,	=CONFIG_SYS_GPDR0_VAL
 	str		r1,   [r0]
 
 	ldr		r0,	=GPDR1
-	ldr		r1,	=CFG_GPDR1_VAL
+	ldr		r1,	=CONFIG_SYS_GPDR1_VAL
 	str		r1,   [r0]
 
 	ldr		r0,	=GPDR2
-	ldr		r1,	=CFG_GPDR2_VAL
+	ldr		r1,	=CONFIG_SYS_GPDR2_VAL
 	str		r1,   [r0]
 
 	ldr		r0,	=GAFR0_L
-	ldr		r1,	=CFG_GAFR0_L_VAL
+	ldr		r1,	=CONFIG_SYS_GAFR0_L_VAL
 	str		r1,   [r0]
 
 	ldr		r0,	=GAFR0_U
-	ldr		r1,	=CFG_GAFR0_U_VAL
+	ldr		r1,	=CONFIG_SYS_GAFR0_U_VAL
 	str		r1,   [r0]
 
 	ldr		r0,	=GAFR1_L
-	ldr		r1,	=CFG_GAFR1_L_VAL
+	ldr		r1,	=CONFIG_SYS_GAFR1_L_VAL
 	str		r1,   [r0]
 
 	ldr		r0,	=GAFR1_U
-	ldr		r1,	=CFG_GAFR1_U_VAL
+	ldr		r1,	=CONFIG_SYS_GAFR1_U_VAL
 	str		r1,   [r0]
 
 	ldr		r0,	=GAFR2_L
-	ldr		r1,	=CFG_GAFR2_L_VAL
+	ldr		r1,	=CONFIG_SYS_GAFR2_L_VAL
 	str		r1,   [r0]
 
 	ldr		r0,	=GAFR2_U
-	ldr		r1,	=CFG_GAFR2_U_VAL
+	ldr		r1,	=CONFIG_SYS_GAFR2_U_VAL
 	str		r1,   [r0]
 
 	ldr	r0,	=PSSR		/* enable GPIO pins */
-	ldr		r1,	=CFG_PSSR_VAL
+	ldr		r1,	=CONFIG_SYS_PSSR_VAL
 	str		r1,   [r0]
 
 	/* ---------------------------------------------------------------- */
@@ -149,17 +149,17 @@ mem_init:
 	/* MSC registers: timing, bus width, mem type                       */
 
 	/* MSC0: nCS(0,1)                                                   */
-	ldr     r2,   =CFG_MSC0_VAL
+	ldr     r2,   =CONFIG_SYS_MSC0_VAL
 	str     r2,   [r1, #MSC0_OFFSET]
 	ldr     r2,   [r1, #MSC0_OFFSET]	/* read back to ensure      */
 						/* that data latches        */
 	/* MSC1: nCS(2,3)                                                   */
-	ldr     r2,  =CFG_MSC1_VAL
+	ldr     r2,  =CONFIG_SYS_MSC1_VAL
 	str     r2,  [r1, #MSC1_OFFSET]
 	ldr     r2,  [r1, #MSC1_OFFSET]
 
 	/* MSC2: nCS(4,5)                                                   */
-	ldr     r2,  =CFG_MSC2_VAL
+	ldr     r2,  =CONFIG_SYS_MSC2_VAL
 	str     r2,  [r1, #MSC2_OFFSET]
 	ldr     r2,  [r1, #MSC2_OFFSET]
 
@@ -168,37 +168,37 @@ mem_init:
 	/* ---------------------------------------------------------------- */
 
 	/* MECR: Memory Expansion Card Register                             */
-	ldr     r2,  =CFG_MECR_VAL
+	ldr     r2,  =CONFIG_SYS_MECR_VAL
 	str     r2,  [r1, #MECR_OFFSET]
 	ldr	r2,	[r1, #MECR_OFFSET]
 
 	/* MCMEM0: Card Interface slot 0 timing                             */
-	ldr     r2,  =CFG_MCMEM0_VAL
+	ldr     r2,  =CONFIG_SYS_MCMEM0_VAL
 	str     r2,  [r1, #MCMEM0_OFFSET]
 	ldr	r2,	[r1, #MCMEM0_OFFSET]
 
 	/* MCMEM1: Card Interface slot 1 timing                             */
-	ldr     r2,  =CFG_MCMEM1_VAL
+	ldr     r2,  =CONFIG_SYS_MCMEM1_VAL
 	str     r2,  [r1, #MCMEM1_OFFSET]
 	ldr	r2,	[r1, #MCMEM1_OFFSET]
 
 	/* MCATT0: Card Interface Attribute Space Timing, slot 0            */
-	ldr     r2,  =CFG_MCATT0_VAL
+	ldr     r2,  =CONFIG_SYS_MCATT0_VAL
 	str     r2,  [r1, #MCATT0_OFFSET]
 	ldr	r2,	[r1, #MCATT0_OFFSET]
 
 	/* MCATT1: Card Interface Attribute Space Timing, slot 1            */
-	ldr     r2,  =CFG_MCATT1_VAL
+	ldr     r2,  =CONFIG_SYS_MCATT1_VAL
 	str     r2,  [r1, #MCATT1_OFFSET]
 	ldr	r2,	[r1, #MCATT1_OFFSET]
 
 	/* MCIO0: Card Interface I/O Space Timing, slot 0                   */
-	ldr     r2,  =CFG_MCIO0_VAL
+	ldr     r2,  =CONFIG_SYS_MCIO0_VAL
 	str     r2,  [r1, #MCIO0_OFFSET]
 	ldr	r2,	[r1, #MCIO0_OFFSET]
 
 	/* MCIO1: Card Interface I/O Space Timing, slot 1                   */
-	ldr     r2,  =CFG_MCIO1_VAL
+	ldr     r2,  =CONFIG_SYS_MCIO1_VAL
 	str     r2,  [r1, #MCIO1_OFFSET]
 	ldr	r2,	[r1, #MCIO1_OFFSET]
 
@@ -214,7 +214,7 @@ mem_init:
 	/* Before accessing MDREFR we need a valid DRI field, so we set     */
 	/* this to power on defaults + DRI field.                           */
 
-	ldr     r3,     =CFG_MDREFR_VAL
+	ldr     r3,     =CONFIG_SYS_MDREFR_VAL
 	ldr     r2,     =0xFFF
 	and     r3,     r3,  r2
 	ldr	r4,	=0x03ca4000
@@ -244,7 +244,7 @@ mem_init:
 
 	/* set MDREFR according to user define with exception of a few bits */
 
-	ldr     r4,     =CFG_MDREFR_VAL
+	ldr     r4,     =CONFIG_SYS_MDREFR_VAL
 	orr	r4,	r4,	#(MDREFR_SLFRSH)
 	bic	r4,	r4,	#(MDREFR_E1PIN|MDREFR_E0PIN)
 	str     r4,     [r1, #MDREFR_OFFSET]    /* write back MDREFR        */
@@ -259,7 +259,7 @@ mem_init:
 
 	/* Step 4c: assert MDREFR:E1PIN and E0PIO as desired                */
 
-	ldr     r4,     =CFG_MDREFR_VAL
+	ldr     r4,     =CONFIG_SYS_MDREFR_VAL
 	str     r4,     [r1, #MDREFR_OFFSET]    /* write back MDREFR        */
 	ldr     r4,     [r1, #MDREFR_OFFSET]
 
@@ -267,7 +267,7 @@ mem_init:
 	/* Step 4d: write MDCNFG with MDCNFG:DEx deasserted (set to 0), to  */
 	/*          configure but not enable each SDRAM partition pair.     */
 
-	ldr	r4,	=CFG_MDCNFG_VAL
+	ldr	r4,	=CONFIG_SYS_MDCNFG_VAL
 	bic	r4,	r4,	#(MDCNFG_DE0|MDCNFG_DE1)
 
 	str     r4,     [r1, #MDCNFG_OFFSET]	/* write back MDCNFG        */
@@ -294,7 +294,7 @@ mem_init:
 	/*          documented in SDRAM data sheets. The address(es) used   */
 	/*          for this purpose must not be cacheable.                 */
 
-	ldr	r3,	=CFG_DRAM_BASE
+	ldr	r3,	=CONFIG_SYS_DRAM_BASE
 	str	r2,	[r3]
 	str	r2,	[r3]
 	str	r2,	[r3]
@@ -314,7 +314,7 @@ mem_init:
 
 	/* Step 4h: Write MDMRS.                                            */
 
-	ldr     r2,  =CFG_MDMRS_VAL
+	ldr     r2,  =CONFIG_SYS_MDMRS_VAL
 	str     r2,  [r1, #MDMRS_OFFSET]
 
 
diff --git a/board/lubbock/u-boot.lds b/board/lubbock/u-boot.lds
index 14d264a68..7cf9fdf63 100644
--- a/board/lubbock/u-boot.lds
+++ b/board/lubbock/u-boot.lds
@@ -51,6 +51,6 @@ SECTIONS
 
 	. = ALIGN(4);
 	__bss_start = .;
-	.bss (NOLOAD) : { *(.bss) }
+	.bss (NOLOAD) : { *(.bss) . = ALIGN(4); }
 	_end = .;
 }
diff --git a/board/lwmon/flash.c b/board/lwmon/flash.c
index b894887c9..f71cc242f 100644
--- a/board/lwmon/flash.c
+++ b/board/lwmon/flash.c
@@ -26,28 +26,28 @@
 #include <common.h>
 #include <mpc8xx.h>
 
-#if defined(CFG_ENV_IS_IN_FLASH)
-# ifndef  CFG_ENV_ADDR
-#  define CFG_ENV_ADDR	(CFG_FLASH_BASE + CFG_ENV_OFFSET)
+#if defined(CONFIG_ENV_IS_IN_FLASH)
+# ifndef  CONFIG_ENV_ADDR
+#  define CONFIG_ENV_ADDR	(CONFIG_SYS_FLASH_BASE + CONFIG_ENV_OFFSET)
 # endif
-# ifndef  CFG_ENV_SIZE
-#  define CFG_ENV_SIZE	CFG_ENV_SECT_SIZE
+# ifndef  CONFIG_ENV_SIZE
+#  define CONFIG_ENV_SIZE	CONFIG_ENV_SECT_SIZE
 # endif
-# ifndef  CFG_ENV_SECT_SIZE
-#  define CFG_ENV_SECT_SIZE  CFG_ENV_SIZE
+# ifndef  CONFIG_ENV_SECT_SIZE
+#  define CONFIG_ENV_SECT_SIZE  CONFIG_ENV_SIZE
 # endif
 #endif
 
 /*---------------------------------------------------------------------*/
 
-flash_info_t	flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips	*/
+flash_info_t	flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips	*/
 
 /*-----------------------------------------------------------------------
  * Functions
  */
 static ulong flash_get_size (vu_long *addr, flash_info_t *info);
 static int write_data (flash_info_t *info, ulong dest, ulong data);
-#ifdef CFG_FLASH_USE_BUFFER_WRITE
+#ifdef CONFIG_SYS_FLASH_USE_BUFFER_WRITE
 static int write_data_buf (flash_info_t * info, ulong dest, uchar * cp, int len);
 #endif
 static void flash_get_offsets (ulong base, flash_info_t *info);
@@ -57,13 +57,13 @@ static void flash_get_offsets (ulong base, flash_info_t *info);
 
 unsigned long flash_init (void)
 {
-	volatile immap_t     *immap  = (immap_t *)CFG_IMMR;
+	volatile immap_t     *immap  = (immap_t *)CONFIG_SYS_IMMR;
 	volatile memctl8xx_t *memctl = &immap->im_memctl;
 	unsigned long size_b0, size_b1;
 	int i;
 
 	/* Init: no FLASHes known */
-	for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) {
+	for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
 		flash_info[i].flash_id = FLASH_UNKNOWN;
 	}
 
@@ -108,66 +108,66 @@ unsigned long flash_init (void)
 		memctl->memc_br1, memctl->memc_or1);
 
 	/* Remap FLASH according to real size */
-	memctl->memc_or0 = (-size_b0 & 0xFFFF8000) | CFG_OR_TIMING_FLASH |
+	memctl->memc_or0 = (-size_b0 & 0xFFFF8000) | CONFIG_SYS_OR_TIMING_FLASH |
 				OR_CSNT_SAM | OR_ACS_DIV1;
-	memctl->memc_br0 = (CFG_FLASH_BASE & BR_BA_MSK) | BR_PS_32 | BR_V;
+	memctl->memc_br0 = (CONFIG_SYS_FLASH_BASE & BR_BA_MSK) | BR_PS_32 | BR_V;
 
 	debug ("## BR0: 0x%08x    OR0: 0x%08x\n",
 		memctl->memc_br0, memctl->memc_or0);
 
 	/* Re-do sizing to get full correct info */
-	size_b0 = flash_get_size((vu_long *)CFG_FLASH_BASE, &flash_info[0]);
+	size_b0 = flash_get_size((vu_long *)CONFIG_SYS_FLASH_BASE, &flash_info[0]);
 
-	flash_get_offsets (CFG_FLASH_BASE, &flash_info[0]);
+	flash_get_offsets (CONFIG_SYS_FLASH_BASE, &flash_info[0]);
 
 	flash_info[0].size = size_b0;
 
-#if CFG_MONITOR_BASE >= CFG_FLASH_BASE
+#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE
 	/* monitor protection ON by default */
 	flash_protect(FLAG_PROTECT_SET,
-		      CFG_MONITOR_BASE,
-		      CFG_MONITOR_BASE+monitor_flash_len-1,
+		      CONFIG_SYS_MONITOR_BASE,
+		      CONFIG_SYS_MONITOR_BASE+monitor_flash_len-1,
 		      &flash_info[0]);
 #endif
 
-#ifdef	CFG_ENV_IS_IN_FLASH
+#ifdef	CONFIG_ENV_IS_IN_FLASH
 	/* ENV protection ON by default */
 	flash_protect(FLAG_PROTECT_SET,
-		      CFG_ENV_ADDR,
-		      CFG_ENV_ADDR+CFG_ENV_SECT_SIZE-1,
+		      CONFIG_ENV_ADDR,
+		      CONFIG_ENV_ADDR+CONFIG_ENV_SECT_SIZE-1,
 		      &flash_info[0]);
 #endif
 
 	if (size_b1) {
-		memctl->memc_or1 = (-size_b1 & 0xFFFF8000) | CFG_OR_TIMING_FLASH |
+		memctl->memc_or1 = (-size_b1 & 0xFFFF8000) | CONFIG_SYS_OR_TIMING_FLASH |
 					OR_CSNT_SAM | OR_ACS_DIV1;
-		memctl->memc_br1 = ((CFG_FLASH_BASE + size_b0) & BR_BA_MSK) |
+		memctl->memc_br1 = ((CONFIG_SYS_FLASH_BASE + size_b0) & BR_BA_MSK) |
 					BR_PS_32 | BR_V;
 
 		debug ("## BR1: 0x%08x    OR1: 0x%08x\n",
 			memctl->memc_br1, memctl->memc_or1);
 
 		/* Re-do sizing to get full correct info */
-		size_b1 = flash_get_size((vu_long *)(CFG_FLASH_BASE + size_b0),
+		size_b1 = flash_get_size((vu_long *)(CONFIG_SYS_FLASH_BASE + size_b0),
 					  &flash_info[1]);
 
 		flash_info[1].size = size_b1;
 
-		flash_get_offsets (CFG_FLASH_BASE + size_b0, &flash_info[1]);
+		flash_get_offsets (CONFIG_SYS_FLASH_BASE + size_b0, &flash_info[1]);
 
-#if CFG_MONITOR_BASE >= CFG_FLASH_BASE
+#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE
 		/* monitor protection ON by default */
 		flash_protect(FLAG_PROTECT_SET,
-			      CFG_MONITOR_BASE,
-			      CFG_MONITOR_BASE+monitor_flash_len-1,
+			      CONFIG_SYS_MONITOR_BASE,
+			      CONFIG_SYS_MONITOR_BASE+monitor_flash_len-1,
 			      &flash_info[1]);
 #endif
 
-#ifdef	CFG_ENV_IS_IN_FLASH
+#ifdef	CONFIG_ENV_IS_IN_FLASH
 		/* ENV protection ON by default */
 		flash_protect(FLAG_PROTECT_SET,
-			      CFG_ENV_ADDR,
-			      CFG_ENV_ADDR+CFG_ENV_SECT_SIZE-1,
+			      CONFIG_ENV_ADDR,
+			      CONFIG_ENV_ADDR+CONFIG_ENV_SECT_SIZE-1,
 			      &flash_info[1]);
 #endif
 	} else {
@@ -342,10 +342,10 @@ static ulong flash_get_size (vu_long *addr, flash_info_t *info)
 
 	}
 
-	if (info->sector_count > CFG_MAX_FLASH_SECT) {
+	if (info->sector_count > CONFIG_SYS_MAX_FLASH_SECT) {
 		printf ("** ERROR: sector count %d > max (%d) **\n",
-			info->sector_count, CFG_MAX_FLASH_SECT);
-		info->sector_count = CFG_MAX_FLASH_SECT;
+			info->sector_count, CONFIG_SYS_MAX_FLASH_SECT);
+		info->sector_count = CONFIG_SYS_MAX_FLASH_SECT;
 	}
 
 	addr[0] = 0x00FF00FF;		/* restore read mode */
@@ -409,7 +409,7 @@ int	flash_erase (flash_info_t *info, int s_first, int s_last)
 			udelay (1000);
 			/* This takes awfully long - up to 50 ms and more */
 			while (((status = *addr) & 0x00800080) != 0x00800080) {
-				if ((now=get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+				if ((now=get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
 					printf ("Timeout\n");
 					*addr = 0x00FF00FF; /* reset to read mode */
 					return 1;
@@ -435,7 +435,7 @@ int	flash_erase (flash_info_t *info, int s_first, int s_last)
 			udelay (1000);
 
 			while (((status = *addr) & 0x00800080) != 0x00800080) {
-				if ((now=get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+				if ((now=get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
 					printf ("Timeout\n");
 					*addr = 0x00B000B0; /* suspend erase	  */
 					*addr = 0x00FF00FF; /* reset to read mode */
@@ -504,10 +504,10 @@ int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
 	/*
 	 * handle FLASH_WIDTH aligned part
 	 */
-#ifdef CFG_FLASH_USE_BUFFER_WRITE
+#ifdef CONFIG_SYS_FLASH_USE_BUFFER_WRITE
 	while(cnt >= FLASH_WIDTH) {
-		i = CFG_FLASH_BUFFER_SIZE > cnt ?
-		    (cnt & ~(FLASH_WIDTH - 1)) : CFG_FLASH_BUFFER_SIZE;
+		i = CONFIG_SYS_FLASH_BUFFER_SIZE > cnt ?
+		    (cnt & ~(FLASH_WIDTH - 1)) : CONFIG_SYS_FLASH_BUFFER_SIZE;
 		if((rc = write_data_buf(info, wp, src,i)) != 0)
 			return rc;
 		wp += i;
@@ -526,7 +526,7 @@ int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
 		wp  += FLASH_WIDTH;
 		cnt -= FLASH_WIDTH;
 	}
-#endif /* CFG_FLASH_USE_BUFFER_WRITE */
+#endif /* CONFIG_SYS_FLASH_USE_BUFFER_WRITE */
 
 	if (cnt == 0) {
 		return (0);
@@ -594,7 +594,7 @@ static int write_data (flash_info_t *info, ulong dest, ulong data)
 	if (flag)
 		enable_interrupts();
 
-	if (flash_status_check(addr, CFG_FLASH_WRITE_TOUT, "write") != 0) {
+	if (flash_status_check(addr, CONFIG_SYS_FLASH_WRITE_TOUT, "write") != 0) {
 		return (1);
 	}
 
@@ -603,7 +603,7 @@ static int write_data (flash_info_t *info, ulong dest, ulong data)
 	return (0);
 }
 
-#ifdef CFG_FLASH_USE_BUFFER_WRITE
+#ifdef CONFIG_SYS_FLASH_USE_BUFFER_WRITE
 /*-----------------------------------------------------------------------
  * Write a buffer to Flash, returns:
  * 0 - OK
@@ -627,7 +627,7 @@ static int write_data_buf(flash_info_t * info, ulong dest, uchar * cp, int len)
 	*addr = 0x00500050;		/* clear status */
 	*addr = 0x00e800e8;		/* write buffer */
 
-	if((retcode = flash_status_check(addr, CFG_FLASH_BUFFER_WRITE_TOUT,
+	if((retcode = flash_status_check(addr, CONFIG_SYS_FLASH_BUFFER_WRITE_TOUT,
 					 "write to buffer")) == 0) {
 		cnt = len / FLASH_WIDTH;
 		*addr = (cnt-1) | ((cnt-1) << 16);
@@ -635,14 +635,14 @@ static int write_data_buf(flash_info_t * info, ulong dest, uchar * cp, int len)
 			*dst++ = *src++;
 		}
 		*addr = 0x00d000d0;		/* write buffer confirm */
-		retcode = flash_status_check(addr, CFG_FLASH_BUFFER_WRITE_TOUT,
+		retcode = flash_status_check(addr, CONFIG_SYS_FLASH_BUFFER_WRITE_TOUT,
 						 "buffer write");
 	}
 	*addr = 0x00FF00FF;	/* restore read mode */
 	*addr = 0x00500050;	/* clear status */
 	return retcode;
 }
-#endif /* CFG_USE_FLASH_BUFFER_WRITE */
+#endif /* CONFIG_SYS_USE_FLASH_BUFFER_WRITE */
 
 /*-----------------------------------------------------------------------
  */
diff --git a/board/lwmon/lwmon.c b/board/lwmon/lwmon.c
index 4a2d8e4a4..878752c66 100644
--- a/board/lwmon/lwmon.c
+++ b/board/lwmon/lwmon.c
@@ -66,7 +66,7 @@ extern void disable_putc(void);
  */
 const uint sdram_table[] =
 {
-#if defined(CFG_MEMORY_75) || defined(CFG_MEMORY_8E)
+#if defined(CONFIG_SYS_MEMORY_75) || defined(CONFIG_SYS_MEMORY_8E)
 	/*
 	 * Single Read. (Offset 0 in UPM RAM)
 	 */
@@ -114,7 +114,7 @@ const uint sdram_table[] =
 	0x7FFFFC07, /* last */
 		    0xFFFFFCFF, 0xFFFFFCFF, 0xFFFFFCFF,
 #endif
-#ifdef CFG_MEMORY_7E
+#ifdef CONFIG_SYS_MEMORY_7E
 	/*
 	 * Single Read. (Offset 0 in UPM RAM)
 	 */
@@ -211,7 +211,7 @@ V* Verification: dzu@denx.de
  ***********************************************************************/
 phys_size_t initdram (int board_type)
 {
-	volatile immap_t *immr = (immap_t *) CFG_IMMR;
+	volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
 	volatile memctl8xx_t *memctl = &immr->im_memctl;
 	long int size_b0;
 	long int size8, size9;
@@ -222,19 +222,19 @@ phys_size_t initdram (int board_type)
 	 */
 	upmconfig (UPMA, (uint *)sdram_table, sizeof(sdram_table)/sizeof(uint));
 
-	memctl->memc_mptpr = CFG_MPTPR;
+	memctl->memc_mptpr = CONFIG_SYS_MPTPR;
 
 	/* burst length=4, burst type=sequential, CAS latency=2 */
-	memctl->memc_mar = CFG_MAR;
+	memctl->memc_mar = CONFIG_SYS_MAR;
 
 	/*
 	 * Map controller bank 3 to the SDRAM bank at preliminary address.
 	 */
-	memctl->memc_or3 = CFG_OR3_PRELIM;
-	memctl->memc_br3 = CFG_BR3_PRELIM;
+	memctl->memc_or3 = CONFIG_SYS_OR3_PRELIM;
+	memctl->memc_br3 = CONFIG_SYS_BR3_PRELIM;
 
 	/* initialize memory address register */
-	memctl->memc_mamr = CFG_MAMR_8COL;	/* refresh not enabled yet */
+	memctl->memc_mamr = CONFIG_SYS_MAMR_8COL;	/* refresh not enabled yet */
 
 	/* mode initialization (offset 5) */
 	udelay (200);				/* 0x80006105 */
@@ -268,22 +268,22 @@ phys_size_t initdram (int board_type)
 	 *
 	 * try 8 column mode
 	 */
-	size8 = dram_size (CFG_MAMR_8COL, (long *)SDRAM_BASE3_PRELIM, SDRAM_MAX_SIZE);
+	size8 = dram_size (CONFIG_SYS_MAMR_8COL, (long *)SDRAM_BASE3_PRELIM, SDRAM_MAX_SIZE);
 
 	udelay (1000);
 
 	/*
 	 * try 9 column mode
 	 */
-	size9 = dram_size (CFG_MAMR_9COL, (long *)SDRAM_BASE3_PRELIM, SDRAM_MAX_SIZE);
+	size9 = dram_size (CONFIG_SYS_MAMR_9COL, (long *)SDRAM_BASE3_PRELIM, SDRAM_MAX_SIZE);
 
 	if (size8 < size9) {		/* leave configuration at 9 columns */
 		size_b0 = size9;
-		memctl->memc_mamr = CFG_MAMR_9COL | MAMR_PTAE;
+		memctl->memc_mamr = CONFIG_SYS_MAMR_9COL | MAMR_PTAE;
 		udelay (500);
 	} else {			/* back to 8 columns            */
 		size_b0 = size8;
-		memctl->memc_mamr = CFG_MAMR_8COL | MAMR_PTAE;
+		memctl->memc_mamr = CONFIG_SYS_MAMR_8COL | MAMR_PTAE;
 		udelay (500);
 	}
 
@@ -293,7 +293,7 @@ phys_size_t initdram (int board_type)
 
 	memctl->memc_or3 = ((-size_b0) & 0xFFFF0000) |
 			OR_CSNT_SAM | OR_G5LS | SDRAM_TIMING;
-	memctl->memc_br3 = (CFG_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V;
+	memctl->memc_br3 = (CONFIG_SYS_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V;
 	udelay (1000);
 
 	return (size_b0);
@@ -327,7 +327,7 @@ V* Verification: dzu@denx.de
  ***********************************************************************/
 static long int dram_size (long int mamr_value, long int *base, long int maxsize)
 {
-	volatile immap_t *immr = (immap_t *) CFG_IMMR;
+	volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
 	volatile memctl8xx_t *memctl = &immr->im_memctl;
 
 	memctl->memc_mamr = mamr_value;
@@ -359,7 +359,7 @@ V* Verification: dzu@denx.de
  ***********************************************************************/
 int board_early_init_f (void)
 {
-	volatile immap_t *immr = (immap_t *) CFG_IMMR;
+	volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
 
 	/* Disable Ethernet TENA on Port B
 	 * Necessary because of pull up in COM3 port.
@@ -437,7 +437,7 @@ void reset_phy (void)
 
 /* maximum number of "magic" key codes that can be assigned */
 
-static uchar kbd_addr = CFG_I2C_KEYBD_ADDR;
+static uchar kbd_addr = CONFIG_SYS_I2C_KEYBD_ADDR;
 
 static uchar *key_match (uchar *);
 
@@ -481,7 +481,7 @@ static void kbd_init (void)
 	uchar val, errcd;
 	int i;
 
-	i2c_init (CFG_I2C_SPEED, CFG_I2C_SLAVE);
+	i2c_init (CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
 
 	gd->kbd_status = 0;
 
@@ -759,6 +759,34 @@ static uchar *key_match (uchar *kbd_data)
 }
 #endif /* CONFIG_PREBOOT */
 
+#ifdef CONFIG_LCD_INFO
+#include <lcd.h>
+#include <version.h>
+#include <timestamp.h>
+
+void lcd_show_board_info(void)
+{
+	char temp[32];
+
+	lcd_printf ("%s (%s - %s)\n", U_BOOT_VERSION, U_BOOT_DATE, U_BOOT_TIME);
+	lcd_printf ("(C) 2008 DENX Software Engineering GmbH\n");
+	lcd_printf ("    Wolfgang DENK, wd@denx.de\n");
+#ifdef CONFIG_LCD_INFO_BELOW_LOGO
+	lcd_printf ("MPC823 CPU at %s MHz\n",
+		strmhz(temp, gd->cpu_clk));
+	lcd_printf ("  %ld MB RAM, %ld MB Flash\n",
+		gd->ram_size >> 20,
+		gd->bd->bi_flashsize >> 20 );
+#else
+	/* leave one blank line */
+	lcd_printf ("\nMPC823 CPU at %s MHz, %ld MB RAM, %ld MB Flash\n",
+		strmhz(temp, gd->cpu_clk),
+		gd->ram_size >> 20,
+		gd->bd->bi_flashsize >> 20 );
+#endif /* CONFIG_LCD_INFO_BELOW_LOGO */
+}
+#endif /* CONFIG_LCD_INFO */
+
 /*---------------Board Special Commands: PIC read/write ---------------*/
 
 #if defined(CONFIG_CMD_BSP)
@@ -862,7 +890,7 @@ int do_kbd (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 	int i;
 
 #if 0 /* Done in kbd_init */
-	i2c_init (CFG_I2C_SPEED, CFG_I2C_SLAVE);
+	i2c_init (CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
 #endif
 
 	/* Read keys */
@@ -887,7 +915,7 @@ U_BOOT_CMD(
 );
 
 /* Read and set LSB switch */
-#define CFG_PC_TXD1_ENA		0x0008		/* PC.12 */
+#define CONFIG_SYS_PC_TXD1_ENA		0x0008		/* PC.12 */
 
 /***********************************************************************
 F* Function:     int do_lsb (cmd_tbl_t *cmdtp, int flag,
@@ -920,7 +948,7 @@ V* Verification: dzu@denx.de
 int do_lsb (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 {
 	uchar val;
-	immap_t *immr = (immap_t *) CFG_IMMR;
+	immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
 
 	switch (argc) {
 	case 1:					/* lsb - print setting */
@@ -932,14 +960,14 @@ int do_lsb (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 
 		if (strcmp (argv[1], "on") == 0) {
 			val |= 0x20;
-			immr->im_ioport.iop_pcpar &= ~(CFG_PC_TXD1_ENA);
-			immr->im_ioport.iop_pcdat |= CFG_PC_TXD1_ENA;
-			immr->im_ioport.iop_pcdir |= CFG_PC_TXD1_ENA;
+			immr->im_ioport.iop_pcpar &= ~(CONFIG_SYS_PC_TXD1_ENA);
+			immr->im_ioport.iop_pcdat |= CONFIG_SYS_PC_TXD1_ENA;
+			immr->im_ioport.iop_pcdir |= CONFIG_SYS_PC_TXD1_ENA;
 		} else if (strcmp (argv[1], "off") == 0) {
 			val &= ~0x20;
-			immr->im_ioport.iop_pcpar &= ~(CFG_PC_TXD1_ENA);
-			immr->im_ioport.iop_pcdat &= ~(CFG_PC_TXD1_ENA);
-			immr->im_ioport.iop_pcdir |= CFG_PC_TXD1_ENA;
+			immr->im_ioport.iop_pcpar &= ~(CONFIG_SYS_PC_TXD1_ENA);
+			immr->im_ioport.iop_pcdat &= ~(CONFIG_SYS_PC_TXD1_ENA);
+			immr->im_ioport.iop_pcdir |= CONFIG_SYS_PC_TXD1_ENA;
 		} else {
 			break;
 		}
@@ -980,7 +1008,7 @@ V* Verification: dzu@denx.de
  ***********************************************************************/
 uchar pic_read (uchar reg)
 {
-	return (i2c_reg_read (CFG_I2C_PICIO_ADDR, reg));
+	return (i2c_reg_read (CONFIG_SYS_I2C_PICIO_ADDR, reg));
 }
 
 /***********************************************************************
@@ -1001,7 +1029,7 @@ V* Verification: dzu@denx.de
  ***********************************************************************/
 void pic_write (uchar reg, uchar val)
 {
-	i2c_reg_write (CFG_I2C_PICIO_ADDR, reg, val);
+	i2c_reg_write (CONFIG_SYS_I2C_PICIO_ADDR, reg, val);
 }
 
 /*---------------------- Board Control Functions ----------------------*/
@@ -1022,7 +1050,7 @@ V* Verification: dzu@denx.de
 void board_poweroff (void)
 {
     /* Turn battery off */
-    ((volatile immap_t *)CFG_IMMR)->im_ioport.iop_pcdat &= ~(1 << (31 - 13));
+    ((volatile immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pcdat &= ~(1 << (31 - 13));
 
     while (1);
 }
diff --git a/board/lwmon/pcmcia.c b/board/lwmon/pcmcia.c
index 8825bd971..ad2e60d59 100644
--- a/board/lwmon/pcmcia.c
+++ b/board/lwmon/pcmcia.c
@@ -51,10 +51,10 @@ int pcmcia_hardware_enable(int slot)
 #endif
 	udelay(10000);
 
-	immap = (immap_t *)CFG_IMMR;
-	sysp  = (sysconf8xx_t *)(&(((immap_t *)CFG_IMMR)->im_siu_conf));
-	pcmp  = (pcmconf8xx_t *)(&(((immap_t *)CFG_IMMR)->im_pcmcia));
-	cp    = (cpm8xx_t *)(&(((immap_t *)CFG_IMMR)->im_cpm));
+	immap = (immap_t *)CONFIG_SYS_IMMR;
+	sysp  = (sysconf8xx_t *)(&(((immap_t *)CONFIG_SYS_IMMR)->im_siu_conf));
+	pcmp  = (pcmconf8xx_t *)(&(((immap_t *)CONFIG_SYS_IMMR)->im_pcmcia));
+	cp    = (cpm8xx_t *)(&(((immap_t *)CONFIG_SYS_IMMR)->im_cpm));
 
 	/*
 	 * Configure SIUMCR to enable PCMCIA port B
@@ -108,8 +108,8 @@ int pcmcia_hardware_enable(int slot)
 
 	/*  switch VCC on */
 	val |= MAX1604_OP_SUS | MAX1604_VCCBON;
-	i2c_init  (CFG_I2C_SPEED, CFG_I2C_SLAVE);
-	i2c_write (CFG_I2C_POWER_A_ADDR, 0, 0, &val, 1);
+	i2c_init  (CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
+	i2c_write (CONFIG_SYS_I2C_POWER_A_ADDR, 0, 0, &val, 1);
 
 	udelay(500000);
 
@@ -137,13 +137,13 @@ int pcmcia_hardware_disable(int slot)
 
 	debug ("hardware_disable: " PCMCIA_BOARD_MSG " Slot %c\n", 'A'+slot);
 
-	immap = (immap_t *)CFG_IMMR;
-	pcmp = (pcmconf8xx_t *)(&(((immap_t *)CFG_IMMR)->im_pcmcia));
+	immap = (immap_t *)CONFIG_SYS_IMMR;
+	pcmp = (pcmconf8xx_t *)(&(((immap_t *)CONFIG_SYS_IMMR)->im_pcmcia));
 
 	/* remove all power, put output in high impedance state */
 	val  = MAX1604_VCCBHIZ | MAX1604_VPPBHIZ;
-	i2c_init  (CFG_I2C_SPEED, CFG_I2C_SLAVE);
-	i2c_write (CFG_I2C_POWER_A_ADDR, 0, 0, &val, 1);
+	i2c_init  (CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
+	i2c_write (CONFIG_SYS_I2C_POWER_A_ADDR, 0, 0, &val, 1);
 
 	/* Configure PCMCIA General Control Register */
 	debug ("Disable PCMCIA buffers and assert RESET\n");
@@ -181,8 +181,8 @@ int pcmcia_voltage_set(int slot, int vcc, int vpp)
 		" Slot %c, Vcc=%d.%d, Vpp=%d.%d\n",
 		'A'+slot, vcc/10, vcc%10, vpp/10, vcc%10);
 
-	immap = (immap_t *)CFG_IMMR;
-	pcmp = (pcmconf8xx_t *)(&(((immap_t *)CFG_IMMR)->im_pcmcia));
+	immap = (immap_t *)CONFIG_SYS_IMMR;
+	pcmp = (pcmconf8xx_t *)(&(((immap_t *)CONFIG_SYS_IMMR)->im_pcmcia));
 	/*
 	 * Disable PCMCIA buffers (isolate the interface)
 	 * and assert RESET signal
@@ -199,8 +199,8 @@ int pcmcia_voltage_set(int slot, int vcc, int vpp)
 	 */
 	debug ("PCMCIA power OFF\n");
 	val  = MAX1604_VCCBHIZ | MAX1604_VPPBHIZ;
-	i2c_init  (CFG_I2C_SPEED, CFG_I2C_SLAVE);
-	i2c_write (CFG_I2C_POWER_A_ADDR, 0, 0, &val, 1);
+	i2c_init  (CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
+	i2c_write (CONFIG_SYS_I2C_POWER_A_ADDR, 0, 0, &val, 1);
 
 	val = 0;
 	switch(vcc) {
@@ -216,7 +216,7 @@ int pcmcia_voltage_set(int slot, int vcc, int vpp)
 		pcmp->pcmc_pipr,
 		(pcmp->pcmc_pipr & 0x00008000) ? "only 5 V" : "can do 3.3V");
 
-	i2c_write (CFG_I2C_POWER_A_ADDR, 0, 0, &val, 1);
+	i2c_write (CONFIG_SYS_I2C_POWER_A_ADDR, 0, 0, &val, 1);
 	if (val) {
 		debug ("PCMCIA powered at %sV\n",
 			(val & MAX1604_VCC_35) ? "3.3" : "5.0");
diff --git a/board/lwmon/u-boot.lds b/board/lwmon/u-boot.lds
index bc1ea7372..319cc7bd0 100644
--- a/board/lwmon/u-boot.lds
+++ b/board/lwmon/u-boot.lds
@@ -53,7 +53,7 @@ SECTIONS
   .text      :
   {
     cpu/mpc8xx/start.o	(.text)
-    common/environment.o(.text)
+    common/env_embedded.o(.text)
     *(.text)
     *(.fixup)
     *(.got1)
@@ -123,6 +123,7 @@ SECTIONS
    *(.dynbss)
    *(.bss)
    *(COMMON)
+   . = ALIGN(4);
   }
   _end = . ;
   PROVIDE (end = .);
diff --git a/board/lwmon/u-boot.lds.debug b/board/lwmon/u-boot.lds.debug
index 2ee823745..bd9d76ce2 100644
--- a/board/lwmon/u-boot.lds.debug
+++ b/board/lwmon/u-boot.lds.debug
@@ -62,7 +62,7 @@ SECTIONS
     lib_ppc/extable.o	(.text)
 
     . = env_offset;
-    common/environment.o(.text)
+    common/env_embedded.o(.text)
 
     *(.text)
     *(.fixup)
diff --git a/board/lwmon5/config.mk b/board/lwmon5/config.mk
index bf2b8798c..3c6d04172 100644
--- a/board/lwmon5/config.mk
+++ b/board/lwmon5/config.mk
@@ -35,5 +35,5 @@ PLATFORM_CPPFLAGS += -DDEBUG
 endif
 
 ifeq ($(dbcr),1)
-PLATFORM_CPPFLAGS += -DCFG_INIT_DBCR=0x8cff0000
+PLATFORM_CPPFLAGS += -DCONFIG_SYS_INIT_DBCR=0x8cff0000
 endif
diff --git a/board/lwmon5/init.S b/board/lwmon5/init.S
index 5aade72b5..718cec6af 100644
--- a/board/lwmon5/init.S
+++ b/board/lwmon5/init.S
@@ -47,7 +47,7 @@ tlbtab:
 	 * BOOT_CS (FLASH) must be first. Before relocation SA_I can be off to use the
 	 * speed up boot process. It is patched after relocation to enable SA_I
 	 */
-	tlbentry(CFG_BOOT_BASE_ADDR, SZ_256M, CFG_BOOT_BASE_ADDR, 1, AC_R|AC_W|AC_X|SA_G)
+	tlbentry(CONFIG_SYS_BOOT_BASE_ADDR, SZ_256M, CONFIG_SYS_BOOT_BASE_ADDR, 1, AC_R|AC_W|AC_X|SA_G)
 
 	/*
 	 * TLB entries for SDRAM are not needed on this platform.
@@ -55,28 +55,28 @@ tlbtab:
 	 * routine.
 	 */
 
-#ifdef CFG_INIT_RAM_DCACHE
+#ifdef CONFIG_SYS_INIT_RAM_DCACHE
 	/* TLB-entry for init-ram in dcache (SA_I must be turned off!) */
-	tlbentry(CFG_INIT_RAM_ADDR, SZ_4K, CFG_INIT_RAM_ADDR, 0, AC_R|AC_W|AC_X|SA_G)
+	tlbentry(CONFIG_SYS_INIT_RAM_ADDR, SZ_4K, CONFIG_SYS_INIT_RAM_ADDR, 0, AC_R|AC_W|AC_X|SA_G)
 #endif
 
 	/* TLB-entry for PCI Memory */
-	tlbentry(CFG_PCI_MEMBASE, SZ_256M, CFG_PCI_MEMBASE, 1, AC_R|AC_W|SA_G|SA_I)
-	tlbentry(CFG_PCI_MEMBASE1, SZ_256M, CFG_PCI_MEMBASE1, 1, AC_R|AC_W|SA_G|SA_I)
-	tlbentry(CFG_PCI_MEMBASE2, SZ_256M, CFG_PCI_MEMBASE2, 1, AC_R|AC_W|SA_G|SA_I)
-	tlbentry(CFG_PCI_MEMBASE3, SZ_256M, CFG_PCI_MEMBASE3, 1, AC_R|AC_W|SA_G|SA_I)
+	tlbentry(CONFIG_SYS_PCI_MEMBASE, SZ_256M, CONFIG_SYS_PCI_MEMBASE, 1, AC_R|AC_W|SA_G|SA_I)
+	tlbentry(CONFIG_SYS_PCI_MEMBASE1, SZ_256M, CONFIG_SYS_PCI_MEMBASE1, 1, AC_R|AC_W|SA_G|SA_I)
+	tlbentry(CONFIG_SYS_PCI_MEMBASE2, SZ_256M, CONFIG_SYS_PCI_MEMBASE2, 1, AC_R|AC_W|SA_G|SA_I)
+	tlbentry(CONFIG_SYS_PCI_MEMBASE3, SZ_256M, CONFIG_SYS_PCI_MEMBASE3, 1, AC_R|AC_W|SA_G|SA_I)
 
 	/* TLB-entry for the FPGA Chip select 2 */
-	tlbentry(CFG_FPGA_BASE_0, SZ_1M, CFG_FPGA_BASE_0, 1, AC_R|AC_W|AC_X|SA_I|SA_G)
+	tlbentry(CONFIG_SYS_FPGA_BASE_0, SZ_1M, CONFIG_SYS_FPGA_BASE_0, 1, AC_R|AC_W|AC_X|SA_I|SA_G)
 
 	/* TLB-entry for the FPGA Chip select 3 */
-	tlbentry(CFG_FPGA_BASE_1, SZ_1M, CFG_FPGA_BASE_1, 1,AC_R|AC_W|AC_X|SA_I|SA_G)
+	tlbentry(CONFIG_SYS_FPGA_BASE_1, SZ_1M, CONFIG_SYS_FPGA_BASE_1, 1,AC_R|AC_W|AC_X|SA_I|SA_G)
 
 	/* TLB-entry for the LIME Controller */
-	tlbentry(CFG_LIME_BASE_0, SZ_16M, CFG_LIME_BASE_0, 1, AC_R|AC_W|AC_X|SA_I|SA_G)
-	tlbentry(CFG_LIME_BASE_1, SZ_16M, CFG_LIME_BASE_1, 1, AC_R|AC_W|AC_X|SA_I|SA_G)
-	tlbentry(CFG_LIME_BASE_2, SZ_16M, CFG_LIME_BASE_2, 1, AC_R|AC_W|AC_X|SA_I|SA_G)
-	tlbentry(CFG_LIME_BASE_3, SZ_16M, CFG_LIME_BASE_3, 1, AC_R|AC_W|AC_X|SA_I|SA_G)
+	tlbentry(CONFIG_SYS_LIME_BASE_0, SZ_16M, CONFIG_SYS_LIME_BASE_0, 1, AC_R|AC_W|AC_X|SA_I|SA_G)
+	tlbentry(CONFIG_SYS_LIME_BASE_1, SZ_16M, CONFIG_SYS_LIME_BASE_1, 1, AC_R|AC_W|AC_X|SA_I|SA_G)
+	tlbentry(CONFIG_SYS_LIME_BASE_2, SZ_16M, CONFIG_SYS_LIME_BASE_2, 1, AC_R|AC_W|AC_X|SA_I|SA_G)
+	tlbentry(CONFIG_SYS_LIME_BASE_3, SZ_16M, CONFIG_SYS_LIME_BASE_3, 1, AC_R|AC_W|AC_X|SA_I|SA_G)
 
 	/* TLB-entry for Internal Registers & OCM */
 	tlbentry(0xe0000000, SZ_16M, 0xe0000000, 0,  AC_R|AC_W|AC_X|SA_I)
diff --git a/board/lwmon5/kbd.c b/board/lwmon5/kbd.c
index 1e5349a6e..0a8787a91 100644
--- a/board/lwmon5/kbd.c
+++ b/board/lwmon5/kbd.c
@@ -74,7 +74,7 @@ static int compare_magic (uchar *kbd_data, uchar *str);
 
 /* maximum number of "magic" key codes that can be assigned */
 
-static uchar kbd_addr = CFG_I2C_KEYBD_ADDR;
+static uchar kbd_addr = CONFIG_SYS_I2C_KEYBD_ADDR;
 
 static uchar *key_match (uchar *);
 
@@ -106,7 +106,7 @@ static void kbd_init (void)
 	uchar val, errcd;
 	int i;
 
-	i2c_init (CFG_I2C_SPEED, CFG_I2C_SLAVE);
+	i2c_init (CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
 
 	gd->kbd_status = 0;
 
@@ -412,7 +412,7 @@ int do_kbd (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 	int i;
 
 #if 0 /* Done in kbd_init */
-	i2c_init (CFG_I2C_SPEED, CFG_I2C_SLAVE);
+	i2c_init (CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
 #endif
 
 	/* Read keys */
diff --git a/board/lwmon5/lwmon5.c b/board/lwmon5/lwmon5.c
index 85795b7c2..aa62f3790 100644
--- a/board/lwmon5/lwmon5.c
+++ b/board/lwmon5/lwmon5.c
@@ -27,7 +27,7 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
-extern flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips	*/
+extern flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips	*/
 
 ulong flash_get_size(ulong base, int banknum);
 int misc_init_r_kbd(void);
@@ -94,24 +94,24 @@ int board_early_init_f(void)
 	reg = 0;
 	mtsdr(sdr_pci0, 0x00000000 | reg);
 
-	gpio_write_bit(CFG_GPIO_FLASH_WP, 1);
+	gpio_write_bit(CONFIG_SYS_GPIO_FLASH_WP, 1);
 
-#if CONFIG_POST & CFG_POST_BSPEC1
-	gpio_write_bit(CFG_GPIO_HIGHSIDE, 1);
+#if CONFIG_POST & CONFIG_SYS_POST_BSPEC1
+	gpio_write_bit(CONFIG_SYS_GPIO_HIGHSIDE, 1);
 
 	reg = 0; /* reuse as counter */
-	out_be32((void *)CFG_DSPIC_TEST_ADDR,
-		in_be32((void *)CFG_DSPIC_TEST_ADDR)
-			& ~CFG_DSPIC_TEST_MASK);
-	while (!gpio_read_in_bit(CFG_GPIO_DSPIC_READY) && reg++ < 1000) {
+	out_be32((void *)CONFIG_SYS_DSPIC_TEST_ADDR,
+		in_be32((void *)CONFIG_SYS_DSPIC_TEST_ADDR)
+			& ~CONFIG_SYS_DSPIC_TEST_MASK);
+	while (!gpio_read_in_bit(CONFIG_SYS_GPIO_DSPIC_READY) && reg++ < 1000) {
 		udelay(1000);
 	}
-	gpio_write_bit(CFG_GPIO_HIGHSIDE, 0);
-	if (gpio_read_in_bit(CFG_GPIO_DSPIC_READY)) {
+	gpio_write_bit(CONFIG_SYS_GPIO_HIGHSIDE, 0);
+	if (gpio_read_in_bit(CONFIG_SYS_GPIO_DSPIC_READY)) {
 		/* set "boot error" flag */
-		out_be32((void *)CFG_DSPIC_TEST_ADDR,
-			in_be32((void *)CFG_DSPIC_TEST_ADDR) |
-			CFG_DSPIC_TEST_MASK);
+		out_be32((void *)CONFIG_SYS_DSPIC_TEST_ADDR,
+			in_be32((void *)CONFIG_SYS_DSPIC_TEST_ADDR) |
+			CONFIG_SYS_DSPIC_TEST_MASK);
 	}
 #endif
 
@@ -123,14 +123,14 @@ int board_early_init_f(void)
 	 * MDIO address. A 2nd reset at this time will make sure, that the
 	 * correct address is latched.
 	 */
-	gpio_write_bit(CFG_GPIO_PHY0_RST, 1);
-	gpio_write_bit(CFG_GPIO_PHY1_RST, 1);
+	gpio_write_bit(CONFIG_SYS_GPIO_PHY0_RST, 1);
+	gpio_write_bit(CONFIG_SYS_GPIO_PHY1_RST, 1);
 	udelay(1000);
-	gpio_write_bit(CFG_GPIO_PHY0_RST, 0);
-	gpio_write_bit(CFG_GPIO_PHY1_RST, 0);
+	gpio_write_bit(CONFIG_SYS_GPIO_PHY0_RST, 0);
+	gpio_write_bit(CONFIG_SYS_GPIO_PHY1_RST, 0);
 	udelay(1000);
-	gpio_write_bit(CFG_GPIO_PHY0_RST, 1);
-	gpio_write_bit(CFG_GPIO_PHY1_RST, 1);
+	gpio_write_bit(CONFIG_SYS_GPIO_PHY0_RST, 1);
+	gpio_write_bit(CONFIG_SYS_GPIO_PHY1_RST, 1);
 
 	return 0;
 }
@@ -194,14 +194,14 @@ int misc_init_r(void)
 
 	/* Monitor protection ON by default */
 	(void)flash_protect(FLAG_PROTECT_SET,
-			    -CFG_MONITOR_LEN,
+			    -CONFIG_SYS_MONITOR_LEN,
 			    0xffffffff,
 			    &flash_info[1]);
 
 	/* Env protection ON by default */
 	(void)flash_protect(FLAG_PROTECT_SET,
-			    CFG_ENV_ADDR_REDUND,
-			    CFG_ENV_ADDR_REDUND + 2*CFG_ENV_SECT_SIZE - 1,
+			    CONFIG_ENV_ADDR_REDUND,
+			    CONFIG_ENV_ADDR_REDUND + 2*CONFIG_ENV_SECT_SIZE - 1,
 			    &flash_info[1]);
 
 	/*
@@ -338,7 +338,7 @@ int pci_pre_init(struct pci_controller *hose)
  *	may not be sufficient for a given board.
  *
  ************************************************************************/
-#if defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT)
+#if defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT)
 void pci_target_init(struct pci_controller *hose)
 {
 	/*--------------------------------------------------------------------------+
@@ -352,14 +352,14 @@ void pci_target_init(struct pci_controller *hose)
 	  | Make this region non-prefetchable.
 	  +--------------------------------------------------------------------------*/
 	out32r(PCIX0_PMM0MA, 0x00000000);	/* PMM0 Mask/Attribute - disabled b4 setting */
-	out32r(PCIX0_PMM0LA, CFG_PCI_MEMBASE);	/* PMM0 Local Address */
-	out32r(PCIX0_PMM0PCILA, CFG_PCI_MEMBASE);	/* PMM0 PCI Low Address */
+	out32r(PCIX0_PMM0LA, CONFIG_SYS_PCI_MEMBASE);	/* PMM0 Local Address */
+	out32r(PCIX0_PMM0PCILA, CONFIG_SYS_PCI_MEMBASE);	/* PMM0 PCI Low Address */
 	out32r(PCIX0_PMM0PCIHA, 0x00000000);	/* PMM0 PCI High Address */
 	out32r(PCIX0_PMM0MA, 0xE0000001);	/* 512M + No prefetching, and enable region */
 
 	out32r(PCIX0_PMM1MA, 0x00000000);	/* PMM0 Mask/Attribute - disabled b4 setting */
-	out32r(PCIX0_PMM1LA, CFG_PCI_MEMBASE2); /* PMM0 Local Address */
-	out32r(PCIX0_PMM1PCILA, CFG_PCI_MEMBASE2);	/* PMM0 PCI Low Address */
+	out32r(PCIX0_PMM1LA, CONFIG_SYS_PCI_MEMBASE2); /* PMM0 Local Address */
+	out32r(PCIX0_PMM1PCILA, CONFIG_SYS_PCI_MEMBASE2);	/* PMM0 PCI Low Address */
 	out32r(PCIX0_PMM1PCIHA, 0x00000000);	/* PMM0 PCI High Address */
 	out32r(PCIX0_PMM1MA, 0xE0000001);	/* 512M + No prefetching, and enable region */
 
@@ -374,8 +374,8 @@ void pci_target_init(struct pci_controller *hose)
 
 	/* Program the board's subsystem id/vendor id */
 	pci_write_config_word(0, PCI_SUBSYSTEM_VENDOR_ID,
-			      CFG_PCI_SUBSYS_VENDORID);
-	pci_write_config_word(0, PCI_SUBSYSTEM_ID, CFG_PCI_SUBSYS_ID);
+			      CONFIG_SYS_PCI_SUBSYS_VENDORID);
+	pci_write_config_word(0, PCI_SUBSYSTEM_ID, CONFIG_SYS_PCI_SUBSYS_ID);
 
 	/* Configure command register as bus master */
 	pci_write_config_word(0, PCI_COMMAND, PCI_COMMAND_MASTER);
@@ -389,13 +389,13 @@ void pci_target_init(struct pci_controller *hose)
 	pci_write_config_dword(0, PCI_BRDGOPT2, 0x00000101);
 
 }
-#endif				/* defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT) */
+#endif				/* defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT) */
 
 /*************************************************************************
  *  pci_master_init
  *
  ************************************************************************/
-#if defined(CONFIG_PCI) && defined(CFG_PCI_MASTER_INIT)
+#if defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_MASTER_INIT)
 void pci_master_init(struct pci_controller *hose)
 {
 	unsigned short temp_short;
@@ -410,7 +410,7 @@ void pci_master_init(struct pci_controller *hose)
 			      temp_short | PCI_COMMAND_MASTER |
 			      PCI_COMMAND_MEMORY);
 }
-#endif				/* defined(CONFIG_PCI) && defined(CFG_PCI_MASTER_INIT) */
+#endif				/* defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_MASTER_INIT) */
 
 /*************************************************************************
  *  is_pci_host
@@ -460,8 +460,8 @@ void hw_watchdog_reset(void)
 	/*
 	 * Toggle watchdog output
 	 */
-	val = gpio_read_out_bit(CFG_GPIO_WATCHDOG) == 0 ? 1 : 0;
-	gpio_write_bit(CFG_GPIO_WATCHDOG, val);
+	val = gpio_read_out_bit(CONFIG_SYS_GPIO_WATCHDOG) == 0 ? 1 : 0;
+	gpio_write_bit(CONFIG_SYS_GPIO_WATCHDOG, val);
 }
 
 int do_eeprom_wp(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
@@ -472,9 +472,9 @@ int do_eeprom_wp(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 	}
 
 	if ((strcmp(argv[1], "on") == 0)) {
-		gpio_write_bit(CFG_GPIO_EEPROM_EXT_WP, 1);
+		gpio_write_bit(CONFIG_SYS_GPIO_EEPROM_EXT_WP, 1);
 	} else if ((strcmp(argv[1], "off") == 0)) {
-		gpio_write_bit(CFG_GPIO_EEPROM_EXT_WP, 0);
+		gpio_write_bit(CONFIG_SYS_GPIO_EEPROM_EXT_WP, 0);
 	} else {
 		printf("Usage:\n%s\n", cmdtp->usage);
 		return 1;
@@ -528,23 +528,23 @@ unsigned int board_video_init (void)
 	/*
 	 * Reset Lime controller
 	 */
-	gpio_write_bit(CFG_GPIO_LIME_S, 1);
+	gpio_write_bit(CONFIG_SYS_GPIO_LIME_S, 1);
 	udelay(500);
-	gpio_write_bit(CFG_GPIO_LIME_RST, 1);
+	gpio_write_bit(CONFIG_SYS_GPIO_LIME_RST, 1);
 
 	/* Lime memory clock adjusted to 100MHz */
-	out_be32((void *)CFG_LIME_SDRAM_CLOCK, CFG_LIME_CLOCK_100MHZ);
+	out_be32((void *)CONFIG_SYS_LIME_SDRAM_CLOCK, CONFIG_SYS_LIME_CLOCK_100MHZ);
 	/* Wait untill time expired. Because of requirements in lime manual */
 	udelay(300);
 	/* Write lime controller memory parameters */
-	out_be32((void *)CFG_LIME_MMR, CFG_LIME_MMR_VALUE);
+	out_be32((void *)CONFIG_SYS_LIME_MMR, CONFIG_SYS_LIME_MMR_VALUE);
 
 	mb862xx.winSizeX = 640;
 	mb862xx.winSizeY = 480;
 	mb862xx.gdfBytesPP = 2;
 	mb862xx.gdfIndex = GDF_15BIT_555RGB;
 
-	return CFG_LIME_BASE_0;
+	return CONFIG_SYS_LIME_BASE_0;
 }
 
 #define DEFAULT_BRIGHTNESS 0x64
@@ -553,12 +553,12 @@ static void board_backlight_brightness(int brightness)
 {
 	if (brightness > 0) {
 		/* pwm duty, lamp on */
-		out_be32((void *)(CFG_FPGA_BASE_0 + 0x00000024), brightness);
-		out_be32((void *)(CFG_FPGA_BASE_0 + 0x00000020), 0x701);
+		out_be32((void *)(CONFIG_SYS_FPGA_BASE_0 + 0x00000024), brightness);
+		out_be32((void *)(CONFIG_SYS_FPGA_BASE_0 + 0x00000020), 0x701);
 	} else {
 		/* lamp off */
-		out_be32((void *)(CFG_FPGA_BASE_0 + 0x00000024), 0x00);
-		out_be32((void *)(CFG_FPGA_BASE_0 + 0x00000020), 0x00);
+		out_be32((void *)(CONFIG_SYS_FPGA_BASE_0 + 0x00000024), 0x00);
+		out_be32((void *)(CONFIG_SYS_FPGA_BASE_0 + 0x00000020), 0x00);
 	}
 }
 
@@ -595,5 +595,5 @@ void video_get_info_str (int line_number, char *info)
 
 void board_reset(void)
 {
-	gpio_write_bit(CFG_GPIO_BOARD_RESET, 1);
+	gpio_write_bit(CONFIG_SYS_GPIO_BOARD_RESET, 1);
 }
diff --git a/board/lwmon5/sdram.c b/board/lwmon5/sdram.c
index 189e82407..72968d780 100644
--- a/board/lwmon5/sdram.c
+++ b/board/lwmon5/sdram.c
@@ -45,10 +45,10 @@
  * memory.
  *
  * If at some time this restriction doesn't apply anymore, just define
- * CFG_ENABLE_SDRAM_CACHE in the board config file and this code should setup
+ * CONFIG_SYS_ENABLE_SDRAM_CACHE in the board config file and this code should setup
  * everything correctly.
  */
-#ifdef CFG_ENABLE_SDRAM_CACHE
+#ifdef CONFIG_SYS_ENABLE_SDRAM_CACHE
 #define MY_TLB_WORD2_I_ENABLE	0			/* enable caching on SDRAM */
 #else
 #define MY_TLB_WORD2_I_ENABLE	TLB_WORD2_I_ENABLE	/* disable caching on SDRAM */
@@ -116,7 +116,7 @@ static void program_ecc(u32 start_address,
 	 * Because of 440EPx errata CHIP 11, we don't touch the last 256
 	 * bytes of SDRAM.
 	 */
-	bytes_remaining = num_bytes - CFG_MEM_TOP_HIDE;
+	bytes_remaining = num_bytes - CONFIG_SYS_MEM_TOP_HIDE;
 
 	/*
 	 * We have to write the ECC bytes by zeroing and flushing in smaller
@@ -252,29 +252,29 @@ phys_size_t initdram (int board_type)
 	/* -----------------------------------------------------------+
 	 * Perform data eye search if requested.
 	 * ----------------------------------------------------------*/
-	program_tlb(0, CFG_SDRAM_BASE, CFG_MBYTES_SDRAM << 20,
+	program_tlb(0, CONFIG_SYS_SDRAM_BASE, CONFIG_SYS_MBYTES_SDRAM << 20,
 		    TLB_WORD2_I_ENABLE);
 	denali_core_search_data_eye();
-	remove_tlb(CFG_SDRAM_BASE, CFG_MBYTES_SDRAM << 20);
+	remove_tlb(CONFIG_SYS_SDRAM_BASE, CONFIG_SYS_MBYTES_SDRAM << 20);
 #endif
 
 	/*
 	 * Program tlb entries for this size (dynamic)
 	 */
-	program_tlb(0, CFG_SDRAM_BASE, CFG_MBYTES_SDRAM << 20,
+	program_tlb(0, CONFIG_SYS_SDRAM_BASE, CONFIG_SYS_MBYTES_SDRAM << 20,
 		    MY_TLB_WORD2_I_ENABLE);
 
 	/*
 	 * Setup 2nd TLB with same physical address but different virtual address
 	 * with cache enabled. This is done for fast ECC generation.
 	 */
-	program_tlb(0, CFG_DDR_CACHED_ADDR, CFG_MBYTES_SDRAM << 20, 0);
+	program_tlb(0, CONFIG_SYS_DDR_CACHED_ADDR, CONFIG_SYS_MBYTES_SDRAM << 20, 0);
 
 #ifdef CONFIG_DDR_ECC
 	/*
 	 * If ECC is enabled, initialize the parity bits.
 	 */
-	program_ecc(CFG_DDR_CACHED_ADDR, CFG_MBYTES_SDRAM << 20, 0);
+	program_ecc(CONFIG_SYS_DDR_CACHED_ADDR, CONFIG_SYS_MBYTES_SDRAM << 20, 0);
 #endif
 
 	/*
@@ -284,5 +284,5 @@ phys_size_t initdram (int board_type)
 	 */
 	set_mcsr(get_mcsr());
 
-	return (CFG_MBYTES_SDRAM << 20);
+	return (CONFIG_SYS_MBYTES_SDRAM << 20);
 }
diff --git a/board/lwmon5/u-boot.lds b/board/lwmon5/u-boot.lds
index b20fb1c0a..05152b7f7 100644
--- a/board/lwmon5/u-boot.lds
+++ b/board/lwmon5/u-boot.lds
@@ -135,9 +135,10 @@ SECTIONS
    *(.dynbss)
    *(.bss)
    *(COMMON)
+   . = ALIGN(4);
   }
 
-  ppcenv_assert = ASSERT(. < 0xFFFF8000, ".bss section too big, overlaps .ppcenv section. Please update your confguration: CFG_MONITOR_BASE, CFG_MONITOR_LEN and TEXT_BASE may need to be modified.");
+  ppcenv_assert = ASSERT(. < 0xFFFF8000, ".bss section too big, overlaps .ppcenv section. Please update your confguration: CONFIG_SYS_MONITOR_BASE, CONFIG_SYS_MONITOR_LEN and TEXT_BASE may need to be modified.");
 
   _end = . ;
   PROVIDE (end = .);
diff --git a/board/m501sk/eeprom.c b/board/m501sk/eeprom.c
index d86392f93..d1a46f348 100644
--- a/board/m501sk/eeprom.c
+++ b/board/m501sk/eeprom.c
@@ -23,13 +23,13 @@
 
 #include <common.h>
 #include <i2c.h>
-#ifdef CFG_EEPROM_AT24C16
+#ifdef CONFIG_SYS_EEPROM_AT24C16
 #undef DEBUG
 
 void eeprom_init(void)
 {
 #if defined(CONFIG_HARD_I2C) || defined(CONFIG_SOFT_I2C)
-	i2c_init(CFG_I2C_SPEED, CFG_I2C_SLAVE);
+	i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
 #endif
 }
 
@@ -53,10 +53,10 @@ int eeprom_read(unsigned dev_addr, unsigned offset, uchar *buffer,
 }
 
 /*
- * for CFG_I2C_EEPROM_ADDR_LEN == 2 (16-bit EEPROM address) offset is
+ * for CONFIG_SYS_I2C_EEPROM_ADDR_LEN == 2 (16-bit EEPROM address) offset is
  *   0x000nxxxx for EEPROM address selectors at n, offset xxxx in EEPROM.
  *
- * for CFG_I2C_EEPROM_ADDR_LEN == 1 (8-bit EEPROM page address) offset is
+ * for CONFIG_SYS_I2C_EEPROM_ADDR_LEN == 1 (8-bit EEPROM page address) offset is
  *   0x00000nxx for EEPROM address selectors and page number at n.
  */
 int eeprom_write(unsigned dev_addr, unsigned offset, uchar *buffer,
@@ -76,8 +76,8 @@ int eeprom_write(unsigned dev_addr, unsigned offset, uchar *buffer,
 		}
 	}
 
-#if defined(CFG_EEPROM_PAGE_WRITE_DELAY_MS)
-	udelay(CFG_EEPROM_PAGE_WRITE_DELAY_MS * 1000);
+#if defined(CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS)
+	udelay(CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS * 1000);
 #endif
 
 	return 0;
@@ -89,11 +89,11 @@ int eeprom_probe(unsigned dev_addr, unsigned offset)
 	unsigned char chip;
 
 	/* Probe the chip address */
-#if CFG_I2C_EEPROM_ADDR_LEN == 1 && !defined(CONFIG_SPI_X)
+#if CONFIG_SYS_I2C_EEPROM_ADDR_LEN == 1 && !defined(CONFIG_SPI_X)
 	chip = offset >> 8; /* block number */
 #else
 	chip = offset >> 16; /* block number */
-#endif /* CFG_I2C_EEPROM_ADDR_LEN, CONFIG_SPI_X */
+#endif /* CONFIG_SYS_I2C_EEPROM_ADDR_LEN, CONFIG_SPI_X */
 
 	chip |= dev_addr; /* insert device address */
 	return (i2c_probe(chip));
diff --git a/board/m501sk/u-boot.lds b/board/m501sk/u-boot.lds
index 99e2ac199..ae6caf598 100644
--- a/board/m501sk/u-boot.lds
+++ b/board/m501sk/u-boot.lds
@@ -50,6 +50,6 @@ SECTIONS
 
 	. = ALIGN(4);
 	__bss_start = .;
-	.bss : { *(.bss) }
+	.bss : { *(.bss) . = ALIGN(4); }
 	_end = .;
 }
diff --git a/board/matrix_vision/mvbc_p/mvbc_p.c b/board/matrix_vision/mvbc_p/mvbc_p.c
index 3332f5aca..a30034231 100644
--- a/board/matrix_vision/mvbc_p/mvbc_p.c
+++ b/board/matrix_vision/mvbc_p/mvbc_p.c
@@ -35,6 +35,7 @@
 #include <fpga.h>
 #include <environment.h>
 #include <fdt_support.h>
+#include <netdev.h>
 #include <asm/io.h>
 #include "fpga.h"
 #include "mvbc_p.h"
@@ -84,9 +85,9 @@ phys_addr_t initdram (int board_type)
 
 	/* find RAM size using SDRAM CS0 only */
 	sdram_start(0);
-	test1 = get_ram_size((long *)CFG_SDRAM_BASE, 0x80000000);
+	test1 = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE, 0x80000000);
 	sdram_start(1);
-	test2 = get_ram_size((long *)CFG_SDRAM_BASE, 0x80000000);
+	test2 = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE, 0x80000000);
 	if (test1 > test2) {
 		sdram_start(0);
 		dramsize = test1;
@@ -192,13 +193,13 @@ void flash_preinit(void)
 
 void flash_afterinit(ulong size)
 {
-	out_be32((u32*)MPC5XXX_BOOTCS_START, START_REG(CFG_BOOTCS_START |
+	out_be32((u32*)MPC5XXX_BOOTCS_START, START_REG(CONFIG_SYS_BOOTCS_START |
 		size));
-	out_be32((u32*)MPC5XXX_CS0_START, START_REG(CFG_BOOTCS_START |
+	out_be32((u32*)MPC5XXX_CS0_START, START_REG(CONFIG_SYS_BOOTCS_START |
 		size));
-	out_be32((u32*)MPC5XXX_BOOTCS_STOP, STOP_REG(CFG_BOOTCS_START | size,
+	out_be32((u32*)MPC5XXX_BOOTCS_STOP, STOP_REG(CONFIG_SYS_BOOTCS_START | size,
 		size));
-	out_be32((u32*)MPC5XXX_CS0_STOP, STOP_REG(CFG_BOOTCS_START | size,
+	out_be32((u32*)MPC5XXX_CS0_STOP, STOP_REG(CONFIG_SYS_BOOTCS_START | size,
 		size));
 }
 
@@ -324,3 +325,9 @@ void ft_board_setup(void *blob, bd_t *bd)
 	ft_cpu_setup(blob, bd);
 	fdt_fixup_memory(blob, (u64)bd->bi_memstart, (u64)bd->bi_memsize);
 }
+
+int board_eth_init(bd_t *bis)
+{
+	cpu_eth_init(bis); /* Built in FEC comes first */
+	return pci_eth_init(bis);
+}
diff --git a/board/matrix_vision/mvblm7/fpga.c b/board/matrix_vision/mvblm7/fpga.c
index a60af019a..7527d161a 100644
--- a/board/matrix_vision/mvblm7/fpga.c
+++ b/board/matrix_vision/mvblm7/fpga.c
@@ -79,7 +79,7 @@ int fpga_null_fn(int cookie)
 
 int fpga_config_fn(int assert, int flush, int cookie)
 {
-	volatile immap_t *im = (volatile immap_t *)CFG_IMMR;
+	volatile immap_t *im = (volatile immap_t *)CONFIG_SYS_IMMR;
 	volatile gpio83xx_t *gpio = (volatile gpio83xx_t *)&im->gpio[0];
 	u32 dvo = gpio->dat;
 
@@ -97,7 +97,7 @@ int fpga_config_fn(int assert, int flush, int cookie)
 
 int fpga_done_fn(int cookie)
 {
-	volatile immap_t *im = (volatile immap_t *)CFG_IMMR;
+	volatile immap_t *im = (volatile immap_t *)CONFIG_SYS_IMMR;
 	volatile gpio83xx_t *gpio = (volatile gpio83xx_t *)&im->gpio[0];
 	int result = 0;
 
@@ -114,7 +114,7 @@ int fpga_done_fn(int cookie)
 
 int fpga_status_fn(int cookie)
 {
-	volatile immap_t *im = (volatile immap_t *)CFG_IMMR;
+	volatile immap_t *im = (volatile immap_t *)CONFIG_SYS_IMMR;
 	volatile gpio83xx_t *gpio = (volatile gpio83xx_t *)&im->gpio[0];
 	int result = 0;
 
@@ -130,7 +130,7 @@ int fpga_status_fn(int cookie)
 
 int fpga_clk_fn(int assert_clk, int flush, int cookie)
 {
-	volatile immap_t *im = (volatile immap_t *)CFG_IMMR;
+	volatile immap_t *im = (volatile immap_t *)CONFIG_SYS_IMMR;
 	volatile gpio83xx_t *gpio = (volatile gpio83xx_t *)&im->gpio[0];
 	u32 dvo = gpio->dat;
 
@@ -148,7 +148,7 @@ int fpga_clk_fn(int assert_clk, int flush, int cookie)
 
 static inline int _write_fpga(u8 val, int dump)
 {
-	volatile immap_t *im = (volatile immap_t *)CFG_IMMR;
+	volatile immap_t *im = (volatile immap_t *)CONFIG_SYS_IMMR;
 	volatile gpio83xx_t *gpio = (volatile gpio83xx_t *)&im->gpio[0];
 	int i;
 	u32 dvo = gpio->dat;
diff --git a/board/matrix_vision/mvblm7/mvblm7.c b/board/matrix_vision/mvblm7/mvblm7.c
index b07f91393..6984af984 100644
--- a/board/matrix_vision/mvblm7/mvblm7.c
+++ b/board/matrix_vision/mvblm7/mvblm7.c
@@ -38,50 +38,50 @@
 
 int fixed_sdram(void)
 {
-	volatile immap_t *im = (immap_t *)CFG_IMMR;
+	volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
 	u32 msize = 0;
 	u32 ddr_size;
 	u32 ddr_size_log2;
 
-	msize = CFG_DDR_SIZE;
+	msize = CONFIG_SYS_DDR_SIZE;
 	for (ddr_size = msize << 20, ddr_size_log2 = 0;
 	     (ddr_size > 1);
 	     ddr_size = ddr_size >> 1, ddr_size_log2++) {
 		if (ddr_size & 1)
 			return -1;
 	}
-	im->sysconf.ddrlaw[0].bar = ((CFG_DDR_SDRAM_BASE>>12) & 0xfffff);
+	im->sysconf.ddrlaw[0].bar = CONFIG_SYS_DDR_SDRAM_BASE & 0xfffff000;
 	im->sysconf.ddrlaw[0].ar = LAWAR_EN | ((ddr_size_log2 - 1) &
 		LAWAR_SIZE);
 
-	im->ddr.csbnds[0].csbnds = CFG_DDR_CS0_BNDS;
-	im->ddr.cs_config[0] = CFG_DDR_CS0_CONFIG;
-	im->ddr.timing_cfg_0 = CFG_DDR_TIMING_0;
-	im->ddr.timing_cfg_1 = CFG_DDR_TIMING_1;
-	im->ddr.timing_cfg_2 = CFG_DDR_TIMING_2;
-	im->ddr.timing_cfg_3 = CFG_DDR_TIMING_3;
-	im->ddr.sdram_cfg = CFG_DDR_SDRAM_CFG;
-	im->ddr.sdram_cfg2 = CFG_DDR_SDRAM_CFG2;
-	im->ddr.sdram_mode = CFG_DDR_MODE;
-	im->ddr.sdram_interval = CFG_DDR_INTERVAL;
-	im->ddr.sdram_clk_cntl = CFG_DDR_CLK_CNTL;
+	im->ddr.csbnds[0].csbnds = CONFIG_SYS_DDR_CS0_BNDS;
+	im->ddr.cs_config[0] = CONFIG_SYS_DDR_CS0_CONFIG;
+	im->ddr.timing_cfg_0 = CONFIG_SYS_DDR_TIMING_0;
+	im->ddr.timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1;
+	im->ddr.timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2;
+	im->ddr.timing_cfg_3 = CONFIG_SYS_DDR_TIMING_3;
+	im->ddr.sdram_cfg = CONFIG_SYS_DDR_SDRAM_CFG;
+	im->ddr.sdram_cfg2 = CONFIG_SYS_DDR_SDRAM_CFG2;
+	im->ddr.sdram_mode = CONFIG_SYS_DDR_MODE;
+	im->ddr.sdram_interval = CONFIG_SYS_DDR_INTERVAL;
+	im->ddr.sdram_clk_cntl = CONFIG_SYS_DDR_CLK_CNTL;
 
 	udelay(300);
 
 	im->ddr.sdram_cfg |= SDRAM_CFG_MEM_EN;
 
-	return CFG_DDR_SIZE;
+	return CONFIG_SYS_DDR_SIZE;
 }
 
 phys_size_t initdram(int board_type)
 {
-	volatile immap_t *im = (immap_t *) CFG_IMMR;
+	volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR;
 	u32 msize = 0;
 
 	if ((im->sysconf.immrbar & IMMRBAR_BASE_ADDR) != (u32) im)
 		return -1;
 
-	im->sysconf.ddrlaw[0].bar = CFG_DDR_BASE & LAWBAR_BAR;
+	im->sysconf.ddrlaw[0].bar = CONFIG_SYS_DDR_BASE & LAWBAR_BAR;
 	msize = fixed_sdram();
 
 	/* return total bus RAM size(bytes) */
@@ -132,14 +132,14 @@ int spi_cs_is_valid(unsigned int bus, unsigned int cs)
 
 void spi_cs_activate(struct spi_slave *slave)
 {
-	volatile gpio83xx_t *iopd = &((immap_t *)CFG_IMMR)->gpio[0];
+	volatile gpio83xx_t *iopd = &((immap_t *)CONFIG_SYS_IMMR)->gpio[0];
 
 	iopd->dat &= ~MVBLM7_MMC_CS;
 }
 
 void spi_cs_deactivate(struct spi_slave *slave)
 {
-	volatile gpio83xx_t *iopd = &((immap_t *)CFG_IMMR)->gpio[0];
+	volatile gpio83xx_t *iopd = &((immap_t *)CONFIG_SYS_IMMR)->gpio[0];
 
 	iopd->dat |= ~MVBLM7_MMC_CS;
 }
diff --git a/board/matrix_vision/mvblm7/pci.c b/board/matrix_vision/mvblm7/pci.c
index ef34a6b45..9f31719ae 100644
--- a/board/matrix_vision/mvblm7/pci.c
+++ b/board/matrix_vision/mvblm7/pci.c
@@ -52,21 +52,21 @@ int mvblm7_load_fpga(void)
 
 static struct pci_region pci_regions[] = {
 	{
-		bus_start: CFG_PCI1_MEM_BASE,
-		phys_start: CFG_PCI1_MEM_PHYS,
-		size: CFG_PCI1_MEM_SIZE,
+		bus_start: CONFIG_SYS_PCI1_MEM_BASE,
+		phys_start: CONFIG_SYS_PCI1_MEM_PHYS,
+		size: CONFIG_SYS_PCI1_MEM_SIZE,
 		flags: PCI_REGION_MEM | PCI_REGION_PREFETCH
 	},
 	{
-		bus_start: CFG_PCI1_MMIO_BASE,
-		phys_start: CFG_PCI1_MMIO_PHYS,
-		size: CFG_PCI1_MMIO_SIZE,
+		bus_start: CONFIG_SYS_PCI1_MMIO_BASE,
+		phys_start: CONFIG_SYS_PCI1_MMIO_PHYS,
+		size: CONFIG_SYS_PCI1_MMIO_SIZE,
 		flags: PCI_REGION_MEM
 	},
 	{
-		bus_start: CFG_PCI1_IO_BASE,
-		phys_start: CFG_PCI1_IO_PHYS,
-		size: CFG_PCI1_IO_SIZE,
+		bus_start: CONFIG_SYS_PCI1_IO_BASE,
+		phys_start: CONFIG_SYS_PCI1_IO_PHYS,
+		size: CONFIG_SYS_PCI1_IO_SIZE,
 		flags: PCI_REGION_IO
 	}
 };
@@ -85,7 +85,7 @@ void pci_init_board(void)
 	struct pci_region *reg[] = { pci_regions };
 
 	load_fpga = 1;
-	immr = (immap_t *) CFG_IMMR;
+	immr = (immap_t *) CONFIG_SYS_IMMR;
 	clk = (clk83xx_t *) &immr->clk;
 	pci_ctrl = immr->pci_ctrl;
 	pci_law = immr->sysconf.pcilaw;
@@ -121,10 +121,10 @@ void pci_init_board(void)
 	for (i = 0; i < 1000; ++i)
 		udelay(1000);
 
-	pci_law[0].bar = CFG_PCI1_MEM_PHYS & LAWBAR_BAR;
+	pci_law[0].bar = CONFIG_SYS_PCI1_MEM_PHYS & LAWBAR_BAR;
 	pci_law[0].ar = LBLAWAR_EN | LBLAWAR_1GB;
 
-	pci_law[1].bar = CFG_PCI1_IO_PHYS & LAWBAR_BAR;
+	pci_law[1].bar = CONFIG_SYS_PCI1_IO_PHYS & LAWBAR_BAR;
 	pci_law[1].ar = LBLAWAR_EN | LBLAWAR_1MB;
 
 	warmboot = gd->bd->bi_bootflags & BOOTFLAG_WARM;
diff --git a/board/mbx8xx/csr.h b/board/mbx8xx/csr.h
index 832e9241f..d1a58b60c 100644
--- a/board/mbx8xx/csr.h
+++ b/board/mbx8xx/csr.h
@@ -54,7 +54,7 @@
 #define SR2_RDY         0x02    /* Flash programming status bit             */
 #define SR2_FT          0x01    /* Reserved for Factory test purposes       */
 
-#define MBX_CSR1 (*((uchar *)CFG_CSR_BASE))
-#define MBX_CSR2 (*((uchar *)CFG_CSR_BASE + 1))
+#define MBX_CSR1 (*((uchar *)CONFIG_SYS_CSR_BASE))
+#define MBX_CSR2 (*((uchar *)CONFIG_SYS_CSR_BASE + 1))
 
 #endif /* __csr_h */
diff --git a/board/mbx8xx/flash.c b/board/mbx8xx/flash.c
index a491f7bf0..2ec420d51 100644
--- a/board/mbx8xx/flash.c
+++ b/board/mbx8xx/flash.c
@@ -32,7 +32,7 @@
 #include <mpc8xx.h>
 #include "vpd.h"
 
-flash_info_t	flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips	*/
+flash_info_t	flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips	*/
 
 /*-----------------------------------------------------------------------
  * Functions
@@ -51,13 +51,13 @@ unsigned long flash_init (void)
     ulong addr;
 
     /* Init: no FLASHes known */
-    for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) {
+    for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
 	flash_info[i].flash_id = FLASH_UNKNOWN;
     }
 
     totsize = 0;
     addr = 0xfc000000;
-    for(i = 0; i < CFG_MAX_FLASH_BANKS; i++) {
+    for(i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) {
 	size = flash_get_size((vu_long *)addr, &flash_info[i]);
 	if (flash_info[i].flash_id == FLASH_UNKNOWN)
 	  break;
@@ -66,7 +66,7 @@ unsigned long flash_init (void)
     }
 
     addr = 0xfe000000;
-    for(i = 0; i < CFG_MAX_FLASH_BANKS; i++) {
+    for(i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) {
 
 	size = flash_get_size((vu_long *)addr, &flash_info[i]);
 	if (flash_info[i].flash_id == FLASH_UNKNOWN)
@@ -75,11 +75,11 @@ unsigned long flash_init (void)
 	addr += size;
     }
 
-#if CFG_MONITOR_BASE >= CFG_FLASH_BASE
+#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE
     /* monitor protection ON by default */
     flash_protect(FLAG_PROTECT_SET,
-		  CFG_MONITOR_BASE,
-		  CFG_MONITOR_BASE+monitor_flash_len-1,
+		  CONFIG_SYS_MONITOR_BASE,
+		  CONFIG_SYS_MONITOR_BASE+monitor_flash_len-1,
 		  &flash_info[0]);
 #endif
 
@@ -274,7 +274,7 @@ int	flash_erase (flash_info_t *info, int s_first, int s_last)
     last  = start;
     addr = (vu_long*)(info->start[l_sect]);
     while ((addr[0] & 0x80808080) != 0x80808080) {
-	if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+	if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
 	    printf ("Timeout\n");
 	    return 1;
 	}
@@ -397,7 +397,7 @@ static int write_word (flash_info_t *info, ulong dest, ulong data)
     /* data polling for D7 */
     start = get_timer (0);
     while ((*((vu_long *)dest) & 0x80808080) != (data & 0x80808080)) {
-	if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+	if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
 	    return (1);
 	}
     }
diff --git a/board/mbx8xx/mbx8xx.c b/board/mbx8xx/mbx8xx.c
index 414d87919..af4f57df6 100644
--- a/board/mbx8xx/mbx8xx.c
+++ b/board/mbx8xx/mbx8xx.c
@@ -121,7 +121,7 @@ static unsigned int board_get_cpufreq(void);
 
 void mbx_init (void)
 {
-	volatile immap_t *immr = (immap_t *) CFG_IMMR;
+	volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
 	volatile memctl8xx_t *memctl = &immr->im_memctl;
 	ulong speed, refclock, plprcr, sccr;
 	ulong br0_32 = memctl->memc_br0 & 0x400;
@@ -147,21 +147,21 @@ void mbx_init (void)
 	immr->im_clkrstk.cark_sccrk = KAPWR_KEY;
 	sccr = immr->im_clkrst.car_sccr;
 	sccr &= SCCR_MASK;
-	sccr |= CFG_SCCR;
+	sccr |= CONFIG_SYS_SCCR;
 	immr->im_clkrst.car_sccr = sccr;
 
 	speed = board_get_cpufreq ();
 	refclock = get_reffreq ();
 
-#if ((CFG_PLPRCR & PLPRCR_MF_MSK) != 0)
-	plprcr = CFG_PLPRCR;
+#if ((CONFIG_SYS_PLPRCR & PLPRCR_MF_MSK) != 0)
+	plprcr = CONFIG_SYS_PLPRCR;
 #else
 	plprcr = immr->im_clkrst.car_plprcr;
 	plprcr &= PLPRCR_MF_MSK;	/* isolate MF field */
-	plprcr |= CFG_PLPRCR;		/* reset control bits   */
+	plprcr |= CONFIG_SYS_PLPRCR;		/* reset control bits   */
 #endif
 
-#ifdef CFG_USE_OSCCLK			/* See doc/README.MBX ! */
+#ifdef CONFIG_SYS_USE_OSCCLK			/* See doc/README.MBX ! */
 	plprcr |= ((speed + refclock / 2) / refclock - 1) << 20;
 #endif
 
@@ -181,24 +181,24 @@ void mbx_init (void)
 	case 40:
 		memctl->memc_br0 = 0xFE000000 | br0_32 | 1;
 		memctl->memc_or0 = 0xFF800930;
-		memctl->memc_or4 = CFG_NVRAM_OR | 0x920;
-		memctl->memc_br4 = CFG_NVRAM_BASE | 0x401;
+		memctl->memc_or4 = CONFIG_SYS_NVRAM_OR | 0x920;
+		memctl->memc_br4 = CONFIG_SYS_NVRAM_BASE | 0x401;
 		break;
 	case 50:
 		memctl->memc_br0 = 0xFE000000 | br0_32 | 1;
 		memctl->memc_or0 = 0xFF800940;
-		memctl->memc_or4 = CFG_NVRAM_OR | 0x930;
-		memctl->memc_br4 = CFG_NVRAM_BASE | 0x401;
+		memctl->memc_or4 = CONFIG_SYS_NVRAM_OR | 0x930;
+		memctl->memc_br4 = CONFIG_SYS_NVRAM_BASE | 0x401;
 		break;
 	default:
 		hang ();
 		break;
 	}
 #ifdef CONFIG_USE_PCI
-	memctl->memc_or5 = CFG_PCIMEM_OR;
-	memctl->memc_br5 = CFG_PCIMEM_BASE | 0x001;
-	memctl->memc_or6 = CFG_PCIBRIDGE_OR;
-	memctl->memc_br6 = CFG_PCIBRIDGE_BASE | 0x001;
+	memctl->memc_or5 = CONFIG_SYS_PCIMEM_OR;
+	memctl->memc_br5 = CONFIG_SYS_PCIMEM_BASE | 0x001;
+	memctl->memc_or6 = CONFIG_SYS_PCIBRIDGE_OR;
+	memctl->memc_br6 = CONFIG_SYS_PCIBRIDGE_BASE | 0x001;
 #endif
 	/*
 	 * FIXME: I do not understand why I have to call this to
@@ -306,7 +306,7 @@ static ulong get_ramsize (dimm_t * dimm)
 
 phys_size_t initdram (int board_type)
 {
-	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
 	volatile memctl8xx_t *memctl = &immap->im_memctl;
 	unsigned long ram_sz = 0;
 	unsigned long dimm_sz = 0;
@@ -354,24 +354,24 @@ phys_size_t initdram (int board_type)
 		dimm_bank = dimm_sz / 2;
 		if (!dimm_sz) {
 			memctl->memc_or1 = ~(ram_sz - 1) | 0x400;
-			memctl->memc_br1 = CFG_SDRAM_BASE | 0x81;
+			memctl->memc_br1 = CONFIG_SYS_SDRAM_BASE | 0x81;
 			memctl->memc_br2 = 0;
 			memctl->memc_br3 = 0;
 		} else if (ram_sz > dimm_bank) {
 			memctl->memc_or1 = ~(ram_sz - 1) | 0x400;
-			memctl->memc_br1 = CFG_SDRAM_BASE | 0x81;
+			memctl->memc_br1 = CONFIG_SYS_SDRAM_BASE | 0x81;
 			memctl->memc_or2 = ~(dimm_bank - 1) | 0x400;
-			memctl->memc_br2 = (CFG_SDRAM_BASE + ram_sz) | 0x81;
+			memctl->memc_br2 = (CONFIG_SYS_SDRAM_BASE + ram_sz) | 0x81;
 			memctl->memc_or3 = ~(dimm_bank - 1) | 0x400;
-			memctl->memc_br3 = (CFG_SDRAM_BASE + ram_sz + dimm_bank) \
+			memctl->memc_br3 = (CONFIG_SYS_SDRAM_BASE + ram_sz + dimm_bank) \
 								     | 0x81;
 		} else {
 			memctl->memc_or2 = ~(dimm_bank - 1) | 0x400;
-			memctl->memc_br2 = CFG_SDRAM_BASE | 0x81;
+			memctl->memc_br2 = CONFIG_SYS_SDRAM_BASE | 0x81;
 			memctl->memc_or3 = ~(dimm_bank - 1) | 0x400;
-			memctl->memc_br3 = (CFG_SDRAM_BASE + dimm_bank) | 0x81;
+			memctl->memc_br3 = (CONFIG_SYS_SDRAM_BASE + dimm_bank) | 0x81;
 			memctl->memc_or1 = ~(ram_sz - 1) | 0x400;
-			memctl->memc_br1 = (CFG_SDRAM_BASE + dimm_sz) | 0x81;
+			memctl->memc_br1 = (CONFIG_SYS_SDRAM_BASE + dimm_sz) | 0x81;
 		}
 	}
 
diff --git a/board/mbx8xx/pcmcia.c b/board/mbx8xx/pcmcia.c
index a02c84845..69368d875 100644
--- a/board/mbx8xx/pcmcia.c
+++ b/board/mbx8xx/pcmcia.c
@@ -88,10 +88,10 @@ int pcmcia_hardware_enable (int slot)
 
 	udelay (10000);
 
-	immap = (immap_t *) CFG_IMMR;
-	sysp = (sysconf8xx_t *) (&(((immap_t *) CFG_IMMR)->im_siu_conf));
-	pcmp = (pcmconf8xx_t *) (&(((immap_t *) CFG_IMMR)->im_pcmcia));
-	cp = (cpm8xx_t *) (&(((immap_t *) CFG_IMMR)->im_cpm));
+	immap = (immap_t *) CONFIG_SYS_IMMR;
+	sysp = (sysconf8xx_t *) (&(((immap_t *) CONFIG_SYS_IMMR)->im_siu_conf));
+	pcmp = (pcmconf8xx_t *) (&(((immap_t *) CONFIG_SYS_IMMR)->im_pcmcia));
+	cp = (cpm8xx_t *) (&(((immap_t *) CONFIG_SYS_IMMR)->im_cpm));
 
 	/* clear interrupt state, and disable interrupts */
 	pcmp->pcmc_pscr = PCMCIA_MASK (_slot_);
diff --git a/board/mbx8xx/u-boot.lds b/board/mbx8xx/u-boot.lds
index 2998e835e..24484c71a 100644
--- a/board/mbx8xx/u-boot.lds
+++ b/board/mbx8xx/u-boot.lds
@@ -123,6 +123,7 @@ SECTIONS
    *(.dynbss)
    *(.bss)
    *(COMMON)
+   . = ALIGN(4);
   }
   _end = . ;
   PROVIDE (end = .);
diff --git a/board/mbx8xx/u-boot.lds.debug b/board/mbx8xx/u-boot.lds.debug
index fd2245f57..67d37ae33 100644
--- a/board/mbx8xx/u-boot.lds.debug
+++ b/board/mbx8xx/u-boot.lds.debug
@@ -62,7 +62,7 @@ SECTIONS
     lib_ppc/extable.o	(.text)
 
     . = env_offset;
-    common/environment.o(.text)
+    common/env_embedded.o(.text)
 
     *(.text)
     *(.fixup)
diff --git a/board/mbx8xx/vpd.c b/board/mbx8xx/vpd.c
index 6f883520c..3bc251d12 100644
--- a/board/mbx8xx/vpd.c
+++ b/board/mbx8xx/vpd.c
@@ -47,7 +47,7 @@
 #define IIC_BD_FREE    (BD_IIC_START + 3*sizeof(cbd_t))
 
 /* FIXME -- replace 0x2000 with offsetof */
-#define VPD_P ((vpd_t *)(CFG_IMMR + 0x2000 + CFG_DPRAMVPD))
+#define VPD_P ((vpd_t *)(CONFIG_SYS_IMMR + 0x2000 + CONFIG_SYS_DPRAMVPD))
 
 /* transmit/receive buffers */
 #define IIC_RX_LENGTH 128
@@ -69,7 +69,7 @@ vpd_packet_t * vpd_find_packet(u_char ident)
 
 void vpd_init(void)
 {
-    volatile immap_t  *im = (immap_t *)CFG_IMMR;
+    volatile immap_t  *im = (immap_t *)CONFIG_SYS_IMMR;
     volatile cpm8xx_t *cp = &(im->im_cpm);
     volatile i2c8xx_t *i2c = (i2c8xx_t *)&(im->im_i2c);
     volatile iic_t *iip;
@@ -120,7 +120,7 @@ void vpd_init(void)
  */
 int vpd_read(uint iic_device, uchar *buf, int count, int offset)
 {
-    volatile immap_t  *im = (immap_t *)CFG_IMMR;
+    volatile immap_t  *im = (immap_t *)CONFIG_SYS_IMMR;
     volatile cpm8xx_t *cp = &(im->im_cpm);
     volatile i2c8xx_t *i2c = (i2c8xx_t *)&(im->im_i2c);
     volatile iic_t *iip;
diff --git a/board/mcc200/auto_update.c b/board/mcc200/auto_update.c
index 2ed66ddb4..49213d0b3 100644
--- a/board/mcc200/auto_update.c
+++ b/board/mcc200/auto_update.c
@@ -25,7 +25,7 @@
 #include <usb.h>
 #include <part.h>
 
-#ifdef CFG_HUSH_PARSER
+#ifdef CONFIG_SYS_HUSH_PARSER
 #include <hush.h>
 #endif
 
@@ -40,8 +40,8 @@
 #error "must define CONFIG_USB_STORAGE"
 #endif
 
-#ifndef CFG_HUSH_PARSER
-#error "must define CFG_HUSH_PARSER"
+#ifndef CONFIG_SYS_HUSH_PARSER
+#error "must define CONFIG_SYS_HUSH_PARSER"
 #endif
 
 #if !defined(CONFIG_CMD_FAT)
diff --git a/board/mcc200/mcc200.c b/board/mcc200/mcc200.c
index 77ee3d7ed..14cf08da3 100644
--- a/board/mcc200/mcc200.c
+++ b/board/mcc200/mcc200.c
@@ -47,7 +47,7 @@ extern flash_info_t flash_info[];	/* FLASH chips info */
 extern int do_auto_update(void);
 ulong flash_get_size (ulong base, int banknum);
 
-#ifndef CFG_RAMBOOT
+#ifndef CONFIG_SYS_RAMBOOT
 static void sdram_start (int hi_addr)
 {
 	long hi_addr_bit = hi_addr ? 0x01000000 : 0;
@@ -92,7 +92,7 @@ static void sdram_start (int hi_addr)
 
 /*
  * ATTENTION: Although partially referenced initdram does NOT make real use
- *	      use of CFG_SDRAM_BASE. The code does not work if CFG_SDRAM_BASE
+ *	      use of CONFIG_SYS_SDRAM_BASE. The code does not work if CONFIG_SYS_SDRAM_BASE
  *	      is something else than 0x00000000.
  */
 
@@ -101,7 +101,7 @@ phys_size_t initdram (int board_type)
 	ulong dramsize = 0;
 	ulong dramsize2 = 0;
 	uint svr, pvr;
-#ifndef CFG_RAMBOOT
+#ifndef CONFIG_SYS_RAMBOOT
 	ulong test1, test2;
 
 	/* setup SDRAM chip selects */
@@ -122,9 +122,9 @@ phys_size_t initdram (int board_type)
 
 	/* find RAM size using SDRAM CS0 only */
 	sdram_start(0);
-	test1 = get_ram_size((long *)CFG_SDRAM_BASE, 0x80000000);
+	test1 = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE, 0x80000000);
 	sdram_start(1);
-	test2 = get_ram_size((long *)CFG_SDRAM_BASE, 0x80000000);
+	test2 = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE, 0x80000000);
 	if (test1 > test2) {
 		sdram_start(0);
 		dramsize = test1;
@@ -150,10 +150,10 @@ phys_size_t initdram (int board_type)
 	/* find RAM size using SDRAM CS1 only */
 	if (!dramsize)
 		sdram_start(0);
-	test2 = test1 = get_ram_size((long *)(CFG_SDRAM_BASE + dramsize), 0x80000000);
+	test2 = test1 = get_ram_size((long *)(CONFIG_SYS_SDRAM_BASE + dramsize), 0x80000000);
 	if (!dramsize) {
 		sdram_start(1);
-		test2 = get_ram_size((long *)(CFG_SDRAM_BASE + dramsize), 0x80000000);
+		test2 = get_ram_size((long *)(CONFIG_SYS_SDRAM_BASE + dramsize), 0x80000000);
 	}
 	if (test1 > test2) {
 		sdram_start(0);
@@ -175,7 +175,7 @@ phys_size_t initdram (int board_type)
 		*(vu_long *)MPC5XXX_SDRAM_CS1CFG = dramsize; /* disabled */
 	}
 
-#else /* CFG_RAMBOOT */
+#else /* CONFIG_SYS_RAMBOOT */
 
 	/* retrieve size of memory connected to SDRAM CS0 */
 	dramsize = *(vu_long *)MPC5XXX_SDRAM_CS0CFG & 0xFF;
@@ -193,7 +193,7 @@ phys_size_t initdram (int board_type)
 		dramsize2 = 0;
 	}
 
-#endif /* CFG_RAMBOOT */
+#endif /* CONFIG_SYS_RAMBOOT */
 
 	/*
 	 * On MPC5200B we need to set the special configuration delay in the
@@ -237,7 +237,7 @@ int misc_init_r (void)
 	/*
 	 * Check if boot FLASH isn't max size
 	 */
-	if (gd->bd->bi_flashsize < (0 - CFG_FLASH_BASE)) {
+	if (gd->bd->bi_flashsize < (0 - CONFIG_SYS_FLASH_BASE)) {
 		/* adjust mapping */
 		*(vu_long *)MPC5XXX_BOOTCS_START = *(vu_long *)MPC5XXX_CS0_START =
 			START_REG(gd->bd->bi_flashstart);
@@ -247,31 +247,31 @@ int misc_init_r (void)
 		/*
 		 * Re-check to get correct base address
 		 */
-		flash_get_size(gd->bd->bi_flashstart, CFG_MAX_FLASH_BANKS - 1);
+		flash_get_size(gd->bd->bi_flashstart, CONFIG_SYS_MAX_FLASH_BANKS - 1);
 
 		/*
 		 * Re-do flash protection upon new addresses
 		 */
 		flash_protect (FLAG_PROTECT_CLEAR,
 			       gd->bd->bi_flashstart, 0xffffffff,
-			       &flash_info[CFG_MAX_FLASH_BANKS - 1]);
+			       &flash_info[CONFIG_SYS_MAX_FLASH_BANKS - 1]);
 
 		/* Monitor protection ON by default */
 		flash_protect (FLAG_PROTECT_SET,
-			       CFG_MONITOR_BASE, CFG_MONITOR_BASE + monitor_flash_len - 1,
-			       &flash_info[CFG_MAX_FLASH_BANKS - 1]);
+			       CONFIG_SYS_MONITOR_BASE, CONFIG_SYS_MONITOR_BASE + monitor_flash_len - 1,
+			       &flash_info[CONFIG_SYS_MAX_FLASH_BANKS - 1]);
 
 		/* Environment protection ON by default */
 		flash_protect (FLAG_PROTECT_SET,
-			       CFG_ENV_ADDR,
-			       CFG_ENV_ADDR + CFG_ENV_SECT_SIZE - 1,
-			       &flash_info[CFG_MAX_FLASH_BANKS - 1]);
+			       CONFIG_ENV_ADDR,
+			       CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE - 1,
+			       &flash_info[CONFIG_SYS_MAX_FLASH_BANKS - 1]);
 
 		/* Redundant environment protection ON by default */
 		flash_protect (FLAG_PROTECT_SET,
-			       CFG_ENV_ADDR_REDUND,
-			       CFG_ENV_ADDR_REDUND + CFG_ENV_SIZE_REDUND - 1,
-			       &flash_info[CFG_MAX_FLASH_BANKS - 1]);
+			       CONFIG_ENV_ADDR_REDUND,
+			       CONFIG_ENV_ADDR_REDUND + CONFIG_ENV_SIZE_REDUND - 1,
+			       &flash_info[CONFIG_SYS_MAX_FLASH_BANKS - 1]);
 	}
 
 	if (gd->bd->bi_flashsize > (32 << 20)) {
@@ -323,9 +323,8 @@ void ide_set_reset (int idereset)
 #endif
 
 #if defined(CONFIG_CMD_DOC)
-extern void doc_probe (ulong physadr);
 void doc_init (void)
 {
-	doc_probe (CFG_DOC_BASE);
+	doc_probe (CONFIG_SYS_DOC_BASE);
 }
 #endif
diff --git a/board/mgcoge/mgcoge.c b/board/mgcoge/mgcoge.c
deleted file mode 100644
index 51b6dc601..000000000
--- a/board/mgcoge/mgcoge.c
+++ /dev/null
@@ -1,360 +0,0 @@
-/*
- * (C) Copyright 2007
- * Heiko Schocher, DENX Software Engineering, hs@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <mpc8260.h>
-#include <ioports.h>
-
-#if defined(CONFIG_OF_BOARD_SETUP) && defined(CONFIG_OF_LIBFDT)
-#include <libfdt.h>
-#endif
-
-/*
- * I/O Port configuration table
- *
- * if conf is 1, then that port pin will be configured at boot time
- * according to the five values podr/pdir/ppar/psor/pdat for that entry
- */
-const iop_conf_t iop_conf_tab[4][32] = {
-
-    /* Port A */
-    {	/*	      conf      ppar psor pdir podr pdat */
-	/* PA31 */ { 0,          0,   0,   0,   0,   0 }, /* PA31            */
-	/* PA30 */ { 0,          0,   0,   0,   0,   0 }, /* PA30            */
-	/* PA29 */ { 0,          0,   0,   0,   0,   0 }, /* PA29            */
-	/* PA28 */ { 0,          0,   0,   0,   0,   0 }, /* PA28            */
-	/* PA27 */ { 0,          0,   0,   0,   0,   0 }, /* PA27            */
-	/* PA26 */ { 0,          0,   0,   0,   0,   0 }, /* PA26            */
-	/* PA25 */ { 0,          0,   0,   0,   0,   0 }, /* PA25            */
-	/* PA24 */ { 0,          0,   0,   0,   0,   0 }, /* PA24            */
-	/* PA23 */ { 0,          0,   0,   0,   0,   0 }, /* PA23            */
-	/* PA22 */ { 0,          0,   0,   0,   0,   0 }, /* PA22            */
-	/* PA21 */ { 0,          0,   0,   0,   0,   0 }, /* PA21            */
-	/* PA20 */ { 0,          0,   0,   0,   0,   0 }, /* PA20            */
-	/* PA19 */ { 0,          0,   0,   0,   0,   0 }, /* PA19            */
-	/* PA18 */ { 0,          0,   0,   0,   0,   0 }, /* PA18            */
-	/* PA17 */ { 0,          0,   0,   0,   0,   0 }, /* PA17            */
-	/* PA16 */ { 0,          0,   0,   0,   0,   0 }, /* PA16            */
-	/* PA15 */ { 0,          0,   0,   0,   0,   0 }, /* PA15            */
-	/* PA14 */ { 0,          0,   0,   0,   0,   0 }, /* PA14            */
-	/* PA13 */ { 0,          0,   0,   0,   0,   0 }, /* PA13            */
-	/* PA12 */ { 0,          0,   0,   0,   0,   0 }, /* PA12            */
-	/* PA11 */ { 0,          0,   0,   0,   0,   0 }, /* PA11            */
-	/* PA10 */ { 0,          0,   0,   0,   0,   0 }, /* PA10            */
-	/* PA9  */ { 1,          1,   0,   1,   0,   0 }, /* SMC2 TxD        */
-	/* PA8  */ { 1,          1,   0,   0,   0,   0 }, /* SMC2 RxD        */
-	/* PA7  */ { 0,          0,   0,   0,   0,   0 }, /* PA7             */
-	/* PA6  */ { 0,          0,   0,   0,   0,   0 }, /* PA6             */
-	/* PA5  */ { 0,          0,   0,   0,   0,   0 }, /* PA5             */
-	/* PA4  */ { 0,          0,   0,   0,   0,   0 }, /* PA4             */
-	/* PA3  */ { 0,          0,   0,   0,   0,   0 }, /* PA3             */
-	/* PA2  */ { 0,          0,   0,   0,   0,   0 }, /* PA2             */
-	/* PA1  */ { 0,          0,   0,   0,   0,   0 }, /* PA1             */
-	/* PA0  */ { 0,          0,   0,   0,   0,   0 }  /* PA0             */
-    },
-
-    /* Port B */
-    {   /*	      conf      ppar psor pdir podr pdat */
-	/* PB31 */ { 0,          0,   0,   0,   0,   0 }, /* PB31            */
-	/* PB30 */ { 0,          0,   0,   0,   0,   0 }, /* PB30            */
-	/* PB29 */ { 0,          0,   0,   0,   0,   0 }, /* PB29            */
-	/* PB28 */ { 0,          0,   0,   0,   0,   0 }, /* PB28            */
-	/* PB27 */ { 0,          0,   0,   0,   0,   0 }, /* PB27            */
-	/* PB26 */ { 0,          0,   0,   0,   0,   0 }, /* PB26            */
-	/* PB25 */ { 0,          0,   0,   0,   0,   0 }, /* PB25            */
-	/* PB24 */ { 0,          0,   0,   0,   0,   0 }, /* PB24            */
-	/* PB23 */ { 0,          0,   0,   0,   0,   0 }, /* PB23            */
-	/* PB22 */ { 0,          0,   0,   0,   0,   0 }, /* PB22            */
-	/* PB21 */ { 0,          0,   0,   0,   0,   0 }, /* PB21            */
-	/* PB20 */ { 0,          0,   0,   0,   0,   0 }, /* PB20            */
-	/* PB19 */ { 0,          0,   0,   0,   0,   0 }, /* PB19            */
-	/* PB18 */ { 0,          0,   0,   0,   0,   0 }, /* PB18            */
-	/* PB17 */ { 0,          0,   0,   0,   0,   0 }, /* non-existent    */
-	/* PB16 */ { 0,          0,   0,   0,   0,   0 }, /* non-existent    */
-	/* PB15 */ { 0,          0,   0,   0,   0,   0 }, /* non-existent    */
-	/* PB14 */ { 0,          0,   0,   0,   0,   0 }, /* non-existent    */
-	/* PB13 */ { 0,          0,   0,   0,   0,   0 }, /* non-existent    */
-	/* PB12 */ { 0,          0,   0,   0,   0,   0 }, /* non-existent    */
-	/* PB11 */ { 0,          0,   0,   0,   0,   0 }, /* non-existent    */
-	/* PB10 */ { 0,          0,   0,   0,   0,   0 }, /* non-existent    */
-	/* PB9  */ { 0,          0,   0,   0,   0,   0 }, /* non-existent    */
-	/* PB8  */ { 0,          0,   0,   0,   0,   0 }, /* non-existent    */
-	/* PB7  */ { 0,          0,   0,   0,   0,   0 }, /* non-existent    */
-	/* PB6  */ { 0,          0,   0,   0,   0,   0 }, /* non-existent    */
-	/* PB5  */ { 0,          0,   0,   0,   0,   0 }, /* non-existent    */
-	/* PB4  */ { 0,          0,   0,   0,   0,   0 }, /* non-existent    */
-	/* PB3  */ { 0,          0,   0,   0,   0,   0 }, /* non-existent    */
-	/* PB2  */ { 0,          0,   0,   0,   0,   0 }, /* non-existent    */
-	/* PB1  */ { 0,          0,   0,   0,   0,   0 }, /* non-existent    */
-	/* PB0  */ { 0,          0,   0,   0,   0,   0 }  /* non-existent    */
-    },
-
-    /* Port C */
-    {   /*	      conf      ppar psor pdir podr pdat */
-	/* PC31 */ { 0,          0,   0,   0,   0,   0 }, /* PC31            */
-	/* PC30 */ { 0,          0,   0,   0,   0,   0 }, /* PC30            */
-	/* PC29 */ { 0,          0,   0,   0,   0,   0 }, /* PC29            */
-	/* PC28 */ { 0,          0,   0,   0,   0,   0 }, /* PC28            */
-	/* PC27 */ { 0,          0,   0,   0,   0,   0 }, /* PC27            */
-	/* PC26 */ { 0,          0,   0,   0,   0,   0 }, /* PC26            */
-	/* PC25 */ { 1,          1,   0,   0,   0,   0 }, /* SCC4 RxClk      */
-	/* PC24 */ { 1,          1,   0,   0,   0,   0 }, /* SCC4 TxClk      */
-	/* PC23 */ { 0,          0,   0,   0,   0,   0 }, /* PC23            */
-	/* PC22 */ { 0,          0,   0,   0,   0,   0 }, /* PC22            */
-	/* PC21 */ { 0,          0,   0,   0,   0,   0 }, /* PC21            */
-	/* PC20 */ { 0,          0,   0,   0,   0,   0 }, /* PC20            */
-	/* PC19 */ { 0,          0,   0,   0,   0,   0 }, /* PC19            */
-	/* PC18 */ { 0,          0,   0,   0,   0,   0 }, /* PC18            */
-	/* PC17 */ { 0,          0,   0,   0,   0,   0 }, /* PC17            */
-	/* PC16 */ { 0,          0,   0,   0,   0,   0 }, /* PC16            */
-	/* PC15 */ { 0,          0,   0,   0,   0,   0 }, /* PC15            */
-	/* PC14 */ { 0,          0,   0,   0,   0,   0 }, /* PC14            */
-	/* PC13 */ { 0,          0,   0,   0,   0,   0 }, /* PC13            */
-	/* PC12 */ { 0,          0,   0,   0,   0,   0 }, /* PC12            */
-	/* PC11 */ { 0,          0,   0,   0,   0,   0 }, /* PC11            */
-	/* PC10 */ { 0,          0,   0,   0,   0,   0 }, /* PC10            */
-	/* PC9  */ { 1,          1,   0,   0,   0,   0 }, /* SCC4: CTS       */
-	/* PC8  */ { 1,          1,   0,   0,   0,   0 }, /* SCC4: CD        */
-	/* PC7  */ { 0,          0,   0,   0,   0,   0 }, /* PC7             */
-	/* PC6  */ { 0,          0,   0,   0,   0,   0 }, /* PC6             */
-	/* PC5  */ { 0,          0,   0,   0,   0,   0 }, /* PC5             */
-	/* PC4  */ { 0,          0,   0,   0,   0,   0 }, /* PC4             */
-	/* PC3  */ { 0,          0,   0,   0,   0,   0 }, /* PC3             */
-	/* PC2  */ { 0,          0,   0,   0,   0,   0 }, /* PC2             */
-	/* PC1  */ { 0,          0,   0,   0,   0,   0 }, /* PC1             */
-	/* PC0  */ { 0,          0,   0,   0,   0,   0 }, /* PC0             */
-    },
-
-    /* Port D */
-    {   /*	      conf      ppar psor pdir podr pdat */
-	/* PD31 */ { 0,          0,   0,   0,   0,   0 }, /* PD31            */
-	/* PD30 */ { 0,          0,   0,   0,   0,   0 }, /* PD30            */
-	/* PD29 */ { 0,          0,   0,   0,   0,   0 }, /* PD29            */
-	/* PD28 */ { 0,          0,   0,   0,   0,   0 }, /* PD28            */
-	/* PD27 */ { 0,          0,   0,   0,   0,   0 }, /* PD27            */
-	/* PD26 */ { 0,          0,   0,   0,   0,   0 }, /* PD26            */
-	/* PD25 */ { 0,          0,   0,   0,   0,   0 }, /* PD25            */
-	/* PD24 */ { 0,          0,   0,   0,   0,   0 }, /* PD24            */
-	/* PD23 */ { 0,          0,   0,   0,   0,   0 }, /* PD23            */
-	/* PD22 */ { 1,          1,   0,   0,   0,   0 }, /* SCC4: RXD       */
-	/* PD21 */ { 1,          1,   0,   1,   0,   0 }, /* SCC4: TXD       */
-	/* PD20 */ { 1,          1,   0,   1,   0,   0 }, /* SCC4: RTS       */
-	/* PD19 */ { 0,          0,   0,   0,   0,   0 }, /* PD19            */
-	/* PD18 */ { 0,          0,   0,   0,   0,   0 }, /* PD18            */
-	/* PD17 */ { 0,          0,   0,   0,   0,   0 }, /* PD17            */
-	/* PD16 */ { 0,          0,   0,   0,   0,   0 }, /* PD16            */
-	/* PD15 */ { 0,          0,   0,   0,   0,   0 }, /* PD15            */
-	/* PD14 */ { 0,          0,   0,   0,   0,   0 }, /* PD14            */
-	/* PD13 */ { 0,          0,   0,   0,   0,   0 }, /* PD13            */
-	/* PD12 */ { 0,          0,   0,   0,   0,   0 }, /* PD12            */
-	/* PD11 */ { 0,          0,   0,   0,   0,   0 }, /* PD11            */
-	/* PD10 */ { 0,          0,   0,   0,   0,   0 }, /* PD10            */
-	/* PD9  */ { 0,          0,   0,   0,   0,   0 }, /* PD9             */
-	/* PD8  */ { 0,          0,   0,   0,   0,   0 }, /* PD8             */
-	/* PD7  */ { 0,          0,   0,   0,   0,   0 }, /* PD7             */
-	/* PD6  */ { 0,          0,   0,   0,   0,   0 }, /* PD6             */
-	/* PD5  */ { 0,          0,   0,   0,   0,   0 }, /* PD5             */
-	/* PD4  */ { 0,          0,   0,   0,   0,   0 }, /* PD4             */
-	/* PD3  */ { 0,          0,   0,   0,   0,   0 }, /* non-existent    */
-	/* PD2  */ { 0,          0,   0,   0,   0,   0 }, /* non-existent    */
-	/* PD1  */ { 0,          0,   0,   0,   0,   0 }, /* non-existent    */
-	/* PD0  */ { 0,          0,   0,   0,   0,   0 }  /* non-existent    */
-    }
-};
-
-/* Try SDRAM initialization with P/LSDMR=sdmr and ORx=orx
- *
- * This routine performs standard 8260 initialization sequence
- * and calculates the available memory size. It may be called
- * several times to try different SDRAM configurations on both
- * 60x and local buses.
- */
-static long int try_init (volatile memctl8260_t * memctl, ulong sdmr,
-						  ulong orx, volatile uchar * base)
-{
-	volatile uchar c = 0xff;
-	volatile uint *sdmr_ptr;
-	volatile uint *orx_ptr;
-	ulong maxsize, size;
-	int i;
-
-	/* We must be able to test a location outsize the maximum legal size
-	 * to find out THAT we are outside; but this address still has to be
-	 * mapped by the controller. That means, that the initial mapping has
-	 * to be (at least) twice as large as the maximum expected size.
-	 */
-	maxsize = (1 + (~orx | 0x7fff))/* / 2*/;
-
-	sdmr_ptr = &memctl->memc_psdmr;
-	orx_ptr = &memctl->memc_or1;
-
-	*orx_ptr = orx;
-
-	/*
-	 * Quote from 8260 UM (10.4.2 SDRAM Power-On Initialization, 10-35):
-	 *
-	 * "At system reset, initialization software must set up the
-	 *  programmable parameters in the memory controller banks registers
-	 *  (ORx, BRx, P/LSDMR). After all memory parameters are configured,
-	 *  system software should execute the following initialization sequence
-	 *  for each SDRAM device.
-	 *
-	 *  1. Issue a PRECHARGE-ALL-BANKS command
-	 *  2. Issue eight CBR REFRESH commands
-	 *  3. Issue a MODE-SET command to initialize the mode register
-	 *
-	 *  The initial commands are executed by setting P/LSDMR[OP] and
-	 *  accessing the SDRAM with a single-byte transaction."
-	 *
-	 * The appropriate BRx/ORx registers have already been set when we
-	 * get here. The SDRAM can be accessed at the address CFG_SDRAM_BASE.
-	 */
-
-	*sdmr_ptr = sdmr | PSDMR_OP_PREA;
-	*base = c;
-
-	*sdmr_ptr = sdmr | PSDMR_OP_CBRR;
-	for (i = 0; i < 8; i++)
-		*base = c;
-
-	*sdmr_ptr = sdmr | PSDMR_OP_MRW;
-	*(base + CFG_MRS_OFFS) = c;	/* setting MR on address lines */
-
-	*sdmr_ptr = sdmr | PSDMR_OP_NORM | PSDMR_RFEN;
-	*base = c;
-
-	size = get_ram_size((long *)base, maxsize);
-	*orx_ptr = orx | ~(size - 1);
-
-	return (size);
-}
-
-phys_size_t initdram(int board_type)
-{
-	volatile immap_t *immap = (immap_t *) CFG_IMMR;
-	volatile memctl8260_t *memctl = &immap->im_memctl;
-
-	long psize;
-
-	memctl->memc_psrt = CFG_PSRT;
-	memctl->memc_mptpr = CFG_MPTPR;
-
-#ifndef CFG_RAMBOOT
-	/* 60x SDRAM setup:
-	 */
-	psize = try_init (memctl, CFG_PSDMR, CFG_OR1,
-						  (uchar *) CFG_SDRAM_BASE);
-#endif /* CFG_RAMBOOT */
-
-	icache_enable ();
-
-	return (psize);
-}
-
-int checkboard(void)
-{
-	puts("Board: mgcoge\n");
-
-	return 0;
-}
-
-/*
- * Early board initalization.
- */
-int board_early_init_r(void)
-{
-	/* setup the UPIOx */
-	*(char *)(CFG_PIGGY_BASE + 0x02) = 0xc0;
-	*(char *)(CFG_PIGGY_BASE + 0x03) = 0x15;
-	return 0;
-}
-
-#if defined(CONFIG_OF_BOARD_SETUP) && defined(CONFIG_OF_LIBFDT)
-/*
- * update "memory" property in the blob
- */
-void ft_blob_update(void *blob, bd_t *bd)
-{
-	int ret, nodeoffset = 0;
-	ulong memory_data[2] = {0};
-	ulong flash_data[8] = {0};
-
-	memory_data[0] = cpu_to_be32(bd->bi_memstart);
-	memory_data[1] = cpu_to_be32(bd->bi_memsize);
-
-	nodeoffset = fdt_path_offset (blob, "/memory");
-	if (nodeoffset >= 0) {
-		ret = fdt_setprop(blob, nodeoffset, "reg", memory_data,
-					sizeof(memory_data));
-	if (ret < 0)
-		printf("ft_blob_update(): cannot set /memory/reg "
-			"property err:%s\n", fdt_strerror(ret));
-	}
-	else {
-		/* memory node is required in dts */
-		printf("ft_blob_update(): cannot find /memory node "
-		"err:%s\n", fdt_strerror(nodeoffset));
-	}
-	/* update Flash addr, size */
-	flash_data[2] = cpu_to_be32(CFG_FLASH_BASE);
-	flash_data[3] = cpu_to_be32(CFG_FLASH_SIZE);
-	flash_data[4] = cpu_to_be32(1);
-	flash_data[5] = cpu_to_be32(0);
-	flash_data[6] = cpu_to_be32(CFG_FLASH_BASE_1);
-	flash_data[7] = cpu_to_be32(CFG_FLASH_SIZE_1);
-	nodeoffset = fdt_path_offset (blob, "/localbus");
-	if (nodeoffset >= 0) {
-		ret = fdt_setprop(blob, nodeoffset, "ranges", flash_data,
-					sizeof(flash_data));
-	if (ret < 0)
-		printf("ft_blob_update(): cannot set /localbus/ranges "
-			"property err:%s\n", fdt_strerror(ret));
-	}
-	else {
-		/* memory node is required in dts */
-		printf("ft_blob_update(): cannot find /localbus node "
-		"err:%s\n", fdt_strerror(nodeoffset));
-	}
-	/* MAC Adresse */
-	nodeoffset = fdt_path_offset (blob, "/soc/cpm/ethernet");
-	if (nodeoffset >= 0) {
-		ret = fdt_setprop(blob, nodeoffset, "mac-address", bd->bi_enetaddr,
-					sizeof(uchar) * 6);
-	if (ret < 0)
-		printf("ft_blob_update(): cannot set /soc/cpm/ethernet/mac-address "
-			"property err:%s\n", fdt_strerror(ret));
-	}
-	else {
-		/* memory node is required in dts */
-		printf("ft_blob_update(): cannot find /soc/cpm/ethernet node "
-		"err:%s\n", fdt_strerror(nodeoffset));
-	}
-
-}
-
-void ft_board_setup(void *blob, bd_t *bd)
-{
-	ft_cpu_setup( blob, bd);
-	ft_blob_update(blob, bd);
-}
-#endif /* defined(CONFIG_OF_BOARD_SETUP) && defined(CONFIG_OF_LIBFDT) */
diff --git a/board/mimc/mimc200/mimc200.c b/board/mimc/mimc200/mimc200.c
index c30bcb6d3..1092cd036 100644
--- a/board/mimc/mimc200/mimc200.c
+++ b/board/mimc/mimc200/mimc200.c
@@ -20,6 +20,7 @@
  * MA 02111-1307 USA
  */
 #include <common.h>
+#include <netdev.h>
 
 #include <asm/io.h>
 #include <asm/sdram.h>
@@ -150,8 +151,6 @@ void spi_cs_deactivate(struct spi_slave *slave)
 #endif /* CONFIG_ATMEL_SPI */
 
 #ifdef CONFIG_CMD_NET
-extern int macb_eth_initialize(int id, void *regs, unsigned int phy_addr);
-
 int board_eth_init(bd_t *bi)
 {
 	macb_eth_initialize(0, (void *)MACB0_BASE, bi->bi_phy_id[0]);
diff --git a/board/miromico/hammerhead/hammerhead.c b/board/miromico/hammerhead/hammerhead.c
index 7fd078125..8b3e22cd9 100644
--- a/board/miromico/hammerhead/hammerhead.c
+++ b/board/miromico/hammerhead/hammerhead.c
@@ -23,6 +23,7 @@
  */
 
 #include <common.h>
+#include <netdev.h>
 
 #include <asm/io.h>
 #include <asm/sdram.h>
@@ -49,8 +50,6 @@ static const struct sdram_config sdram_config = {
 	.refresh_period	= (781 * (SDRAMC_BUS_HZ / 1000)) / 100000,
 };
 
-extern int macb_eth_initialize(int id, void *regs, unsigned int phy_addr);
-
 #ifdef CONFIG_CMD_NET
 int board_eth_init(bd_t *bis)
 {
diff --git a/board/ml2/flash.c b/board/ml2/flash.c
index ad0f0752b..c125d418d 100644
--- a/board/ml2/flash.c
+++ b/board/ml2/flash.c
@@ -22,7 +22,7 @@
 
 #define FLASH_BANK_SIZE (64*1024*1024)
 
-flash_info_t    flash_info[CFG_MAX_FLASH_BANKS];
+flash_info_t    flash_info[CONFIG_SYS_MAX_FLASH_BANKS];
 
 #define SECT_SIZE		(512*1024)
 
@@ -61,16 +61,16 @@ ulong flash_init(void) {
 	int i, j;
 	ulong size = 0;
 
-	for(i=0;i<CFG_MAX_FLASH_BANKS;i++) {
+	for(i=0;i<CONFIG_SYS_MAX_FLASH_BANKS;i++) {
 		ulong flashbase = 0;
 
 		flash_info[i].flash_id = (INTEL_MANUFACT & FLASH_VENDMASK) |
 								 (INTEL_ID_28F128J3A & FLASH_TYPEMASK);
 		flash_info[i].size = FLASH_BANK_SIZE;
-		flash_info[i].sector_count = CFG_MAX_FLASH_SECT;
-		memset(flash_info[i].protect, 0, CFG_MAX_FLASH_SECT);
+		flash_info[i].sector_count = CONFIG_SYS_MAX_FLASH_SECT;
+		memset(flash_info[i].protect, 0, CONFIG_SYS_MAX_FLASH_SECT);
 		if (i==0)
-			flashbase = CFG_FLASH_BASE;
+			flashbase = CONFIG_SYS_FLASH_BASE;
 		else
 			panic("configured too many flash banks!\n");
 		for (j = 0; j < flash_info[i].sector_count; j++)
diff --git a/board/ml2/serial.c b/board/ml2/serial.c
index c18815bf8..d9113ab93 100644
--- a/board/ml2/serial.c
+++ b/board/ml2/serial.c
@@ -25,26 +25,26 @@
 #include <command.h>
 #include <configs/ML2.h>
 
-#if (defined CFG_INIT_CHAN1) || (defined CFG_INIT_CHAN2)
+#if (defined CONFIG_SYS_INIT_CHAN1) || (defined CONFIG_SYS_INIT_CHAN2)
 #include <ns16550.h>
 #endif
 
 DECLARE_GLOBAL_DATA_PTR;
 
-#if (defined CFG_INIT_CHAN1) || (defined CFG_INIT_CHAN2)
-const NS16550_t COM_PORTS[] = { (NS16550_t) CFG_NS16550_COM1,
-	(NS16550_t) CFG_NS16550_COM2
+#if (defined CONFIG_SYS_INIT_CHAN1) || (defined CONFIG_SYS_INIT_CHAN2)
+const NS16550_t COM_PORTS[] = { (NS16550_t) CONFIG_SYS_NS16550_COM1,
+	(NS16550_t) CONFIG_SYS_NS16550_COM2
 };
 #endif
 
 int serial_init (void)
 {
-	int clock_divisor = CFG_NS16550_CLK / 16 / gd->baudrate;
+	int clock_divisor = CONFIG_SYS_NS16550_CLK / 16 / gd->baudrate;
 
-#ifdef CFG_INIT_CHAN1
+#ifdef CONFIG_SYS_INIT_CHAN1
 	(void) NS16550_init (COM_PORTS[0], clock_divisor);
 #endif
-#ifdef CFG_INIT_CHAN2
+#ifdef CONFIG_SYS_INIT_CHAN2
 	(void) NS16550_init (COM_PORTS[1], clock_divisor);
 #endif
 	return 0;
@@ -54,29 +54,29 @@ int serial_init (void)
 void serial_putc (const char c)
 {
 	if (c == '\n')
-		NS16550_putc (COM_PORTS[CFG_DUART_CHAN], '\r');
+		NS16550_putc (COM_PORTS[CONFIG_SYS_DUART_CHAN], '\r');
 
-	NS16550_putc (COM_PORTS[CFG_DUART_CHAN], c);
+	NS16550_putc (COM_PORTS[CONFIG_SYS_DUART_CHAN], c);
 }
 
 int serial_getc (void)
 {
-	return NS16550_getc (COM_PORTS[CFG_DUART_CHAN]);
+	return NS16550_getc (COM_PORTS[CONFIG_SYS_DUART_CHAN]);
 }
 
 int serial_tstc (void)
 {
-	return NS16550_tstc (COM_PORTS[CFG_DUART_CHAN]);
+	return NS16550_tstc (COM_PORTS[CONFIG_SYS_DUART_CHAN]);
 }
 
 void serial_setbrg (void)
 {
-	int clock_divisor = CFG_NS16550_CLK / 16 / gd->baudrate;
+	int clock_divisor = CONFIG_SYS_NS16550_CLK / 16 / gd->baudrate;
 
-#ifdef CFG_INIT_CHAN1
+#ifdef CONFIG_SYS_INIT_CHAN1
 	NS16550_reinit (COM_PORTS[0], clock_divisor);
 #endif
-#ifdef CFG_INIT_CHAN2
+#ifdef CONFIG_SYS_INIT_CHAN2
 	NS16550_reinit (COM_PORTS[1], clock_divisor);
 #endif
 }
diff --git a/board/ml2/u-boot.lds b/board/ml2/u-boot.lds
index c9406ad7f..13ceea042 100644
--- a/board/ml2/u-boot.lds
+++ b/board/ml2/u-boot.lds
@@ -63,14 +63,13 @@ SECTIONS
     cpu/ppc4xx/4xx_uart.o	(.text)
     cpu/ppc4xx/cpu_init.o	(.text)
     cpu/ppc4xx/speed.o	(.text)
-    cpu/ppc4xx/4xx_enet.o	(.text)
     common/dlmalloc.o	(.text)
     lib_generic/crc32.o		(.text)
     lib_ppc/extable.o	(.text)
     lib_generic/zlib.o		(.text)
 
 /*    . = env_offset;*/
-/*    common/environment.o(.text)*/
+/*    common/env_embedded.o(.text)*/
 
     *(.text)
     *(.fixup)
@@ -141,6 +140,7 @@ SECTIONS
    *(.dynbss)
    *(.bss)
    *(COMMON)
+   . = ALIGN(4);
   }
   _end = . ;
   PROVIDE (end = .);
diff --git a/board/ml2/u-boot.lds.debug b/board/ml2/u-boot.lds.debug
index 0552994f4..338392a07 100644
--- a/board/ml2/u-boot.lds.debug
+++ b/board/ml2/u-boot.lds.debug
@@ -61,7 +61,7 @@ SECTIONS
     lib_generic/crc32.o		(.text)
     lib_ppc/extable.o	(.text)
 
-    common/environment.o(.text)
+    common/env_embedded.o(.text)
 
     *(.text)
     *(.fixup)
diff --git a/board/modnet50/flash.c b/board/modnet50/flash.c
index a50639e09..4c3114328 100644
--- a/board/modnet50/flash.c
+++ b/board/modnet50/flash.c
@@ -76,7 +76,7 @@
 #define AVAIL_SIZE		(DEVICE_SIZE*MAX_FLASH_DEVICES - RESERVED_CELLS*CELL_SIZE)
 
 
-flash_info_t flash_info[CFG_MAX_FLASH_BANKS];
+flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];
 static __u16 toggling_bits;
 
 
@@ -120,8 +120,8 @@ ulong flash_get_size (ulong baseaddr, flash_info_t * info)
 	case AMD_ID_LV160B:
 		info->flash_id +=
 			(FLASH_AM160LV | FLASH_AM160B) & FLASH_TYPEMASK;
-		info->sector_count = CFG_MAX_FLASH_SECT;
-		info->size = CFG_FLASH_SIZE;
+		info->sector_count = CONFIG_SYS_MAX_FLASH_SECT;
+		info->size = CONFIG_SYS_FLASH_SIZE;
 		/* 1*16K Boot Block
 		   2*8K Parameter Block
 		   1*32K Small Main Block */
@@ -130,7 +130,7 @@ ulong flash_get_size (ulong baseaddr, flash_info_t * info)
 		info->start[2] = baseaddr + 0x6000;
 		info->start[3] = baseaddr + 0x8000;
 		for (i = 1; i < info->sector_count; i++)
-			info->start[3 + i] = baseaddr + i * CFG_MAIN_SECT_SIZE;
+			info->start[3 + i] = baseaddr + i * CONFIG_SYS_MAIN_SECT_SIZE;
 		break;
 	default:
 		info->flash_id = FLASH_UNKNOWN;
@@ -160,12 +160,12 @@ ulong flash_init (void)
 	int i;
 
 	/* Init: no FLASHes known */
-	for (i = 0; i < CFG_MAX_FLASH_BANKS; ++i) {
+	for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
 		flash_info[i].flash_id = FLASH_UNKNOWN;
 	}
 
 	/* Static FLASH Bank configuration here (only one bank) */
-	size = flash_get_size (CFG_FLASH_BASE, &flash_info[0]);
+	size = flash_get_size (CONFIG_SYS_FLASH_BASE, &flash_info[0]);
 
 	if (flash_info[0].flash_id == FLASH_UNKNOWN || size == 0) {
 		printf ("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n",
@@ -176,13 +176,13 @@ ulong flash_init (void)
 	 * protect monitor and environment sectors
 	 */
 	flash_protect (FLAG_PROTECT_SET,
-		       CFG_FLASH_BASE,
-		       CFG_FLASH_BASE + monitor_flash_len - 1,
+		       CONFIG_SYS_FLASH_BASE,
+		       CONFIG_SYS_FLASH_BASE + monitor_flash_len - 1,
 		       &flash_info[0]);
 
 	flash_protect (FLAG_PROTECT_SET,
-		       CFG_ENV_ADDR,
-		       CFG_ENV_ADDR + CFG_ENV_SIZE - 1, &flash_info[0]);
+		       CONFIG_ENV_ADDR,
+		       CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1, &flash_info[0]);
 
 	return size;
 }
@@ -345,7 +345,7 @@ int flash_erase (flash_info_t * info, int s_first, int s_last)
 					/* arm simple, non interrupt dependent timer */
 					reset_timer_masked ();
 					while (flash_check_erase_amd (info->start[sect])) {
-						if (get_timer_masked () > CFG_FLASH_ERASE_TOUT) {
+						if (get_timer_masked () > CONFIG_SYS_FLASH_ERASE_TOUT) {
 							printf ("timeout!\n");
 							/* OOPS: reach timeout,
 							 * try to reset chip
@@ -449,7 +449,7 @@ static int write_word (flash_info_t * info, ulong dest, ushort data)
 	reset_timer_masked ();
 
 	while (flash_check_write_amd (dest)) {
-		if (get_timer_masked () > CFG_FLASH_WRITE_TOUT) {
+		if (get_timer_masked () > CONFIG_SYS_FLASH_WRITE_TOUT) {
 			printf ("timeout! @ %08lX\n", dest);
 			/* OOPS: reach timeout,
 			 *       try to reset chip */
diff --git a/board/modnet50/u-boot.lds b/board/modnet50/u-boot.lds
index b3c2bf950..a435466d4 100644
--- a/board/modnet50/u-boot.lds
+++ b/board/modnet50/u-boot.lds
@@ -51,7 +51,7 @@ SECTIONS
 
 	. = ALIGN(4);
 	__bss_start = .;
-	.bss (NOLOAD) : { *(.bss) }
+	.bss (NOLOAD) : { *(.bss) . = ALIGN(4); }
 	_end = .;
 				  /* Stabs debugging sections.	  */
 	.stab 0 : { *(.stab) }
diff --git a/board/motionpro/motionpro.c b/board/motionpro/motionpro.c
index 3b3406222..b3692190b 100644
--- a/board/motionpro/motionpro.c
+++ b/board/motionpro/motionpro.c
@@ -5,7 +5,7 @@
  * modified for Promess PRO - by Andy Joseph, andy@promessdev.com
  * modified for Promess PRO-Motion - by Robert McCullough, rob@promessdev.com
  * modified by Chris M. Tumas 6/20/06 Change CAS latency to 2 from 3
- * Also changed the refresh for 100Mhz operation
+ * Also changed the refresh for 100MHz operation
  *
  * See file CREDITS for list of people who contributed to this
  * project.
@@ -96,7 +96,7 @@ void reset_phy(void)
 	return;
 }
 
-#ifndef CFG_RAMBOOT
+#ifndef CONFIG_SYS_RAMBOOT
 /*
  * Helper function to initialize SDRAM controller.
  */
@@ -126,7 +126,7 @@ static void sdram_start(int hi_addr)
 	/* normal operation */
 	*(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | hi_addr_bit;
 }
-#endif /* !CFG_RAMBOOT */
+#endif /* !CONFIG_SYS_RAMBOOT */
 
 
 /*
@@ -135,7 +135,7 @@ static void sdram_start(int hi_addr)
 phys_size_t initdram(int board_type)
 {
 	ulong dramsize = 0;
-#ifndef CFG_RAMBOOT
+#ifndef CONFIG_SYS_RAMBOOT
 	ulong test1, test2;
 
 	/* According to AN3221 (MPC5200B SDRAM Initialization and
@@ -153,9 +153,9 @@ phys_size_t initdram(int board_type)
 	*(vu_long *)MPC5XXX_SDRAM_CONFIG2 = SDRAM_CONFIG2;
 
 	sdram_start(0);
-	test1 = get_ram_size((long *)CFG_SDRAM_BASE, 0x80000000);
+	test1 = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE, 0x80000000);
 	sdram_start(1);
-	test2 = get_ram_size((long *)CFG_SDRAM_BASE, 0x80000000);
+	test2 = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE, 0x80000000);
 	if (test1 > test2) {
 		sdram_start(0);
 		dramsize = test1;
@@ -178,14 +178,14 @@ phys_size_t initdram(int board_type)
 	/* let SDRAM CS1 start right after CS0 and disable it */
 	*(vu_long *) MPC5XXX_SDRAM_CS1CFG = dramsize;
 
-#else /* !CFG_RAMBOOT */
+#else /* !CONFIG_SYS_RAMBOOT */
 	/* retrieve size of memory connected to SDRAM CS0 */
 	dramsize = *(vu_long *)MPC5XXX_SDRAM_CS0CFG & 0xFF;
 	if (dramsize >= 0x13)
 		dramsize = (1 << (dramsize - 0x13)) << 20;
 	else
 		dramsize = 0;
-#endif /* CFG_RAMBOOT */
+#endif /* CONFIG_SYS_RAMBOOT */
 
 	/* return total ram size */
 	return dramsize;
diff --git a/board/mousse/flash.c b/board/mousse/flash.c
index 2c32b8ffa..d729f33f9 100644
--- a/board/mousse/flash.c
+++ b/board/mousse/flash.c
@@ -50,7 +50,7 @@ int flashLibInited = 0;
 #define PRIVATE
 #endif
 
-flash_info_t flash_info[CFG_MAX_FLASH_BANKS];
+flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];
 
 #define SLEEP_DELAY    166
 #define FLASH_SECTOR_SIZE   (64*1024)
diff --git a/board/mousse/m48t59y.c b/board/mousse/m48t59y.c
index 2c1e6cf8b..beb26fe2d 100644
--- a/board/mousse/m48t59y.c
+++ b/board/mousse/m48t59y.c
@@ -299,8 +299,7 @@ rtc_get( struct rtc_time *tmp )
 	return 0;
 }
 
-void
-rtc_set( struct rtc_time *tmp )
+int rtc_set( struct rtc_time *tmp )
 {
 	m48_tod_set(tmp->tm_year,		/* 1980-2079 */
 		    tmp->tm_mon,		/* 01-12 */
@@ -315,6 +314,7 @@ rtc_set( struct rtc_time *tmp )
 		tmp->tm_hour, tmp->tm_min, tmp->tm_sec);
 #endif
 
+	return 0;
 }
 
 void
diff --git a/board/mousse/mousse.c b/board/mousse/mousse.c
index f8f152976..bd8d1c6f0 100644
--- a/board/mousse/mousse.c
+++ b/board/mousse/mousse.c
@@ -28,7 +28,9 @@
 
 #include <common.h>
 #include <mpc824x.h>
+#include <netdev.h>
 #include <asm/processor.h>
+#include <timestamp.h>
 
 #include "mousse.h"
 #include "m48t59y.h"
@@ -41,7 +43,7 @@ int checkboard (void)
 	char buf[32];
 
 	puts ("Board: MOUSSE MPC8240/KAHLUA - CHRP (MAP B)\n");
-	printf ("Built: %s at %s\n", __DATE__, __TIME__);
+	printf ("Built: %s at %s\n", U_BOOT_DATE, U_BOOT_TIME);
 	printf ("MPLD:  Revision %d\n", SYS_REVID_GET ());
 	printf ("Local Bus:  %s MHz\n", strmhz (buf, busfreq));
 
@@ -57,7 +59,7 @@ int checkflash (void)
 
 phys_size_t initdram (int board_type)
 {
-	return CFG_RAM_SIZE;
+	return CONFIG_SYS_RAM_SIZE;
 }
 
 
@@ -84,3 +86,8 @@ int misc_init_f (void)
 	get_tod ();
 	return 0;
 }
+
+int board_eth_init(bd_t *bis)
+{
+	return pci_eth_init(bis);
+}
diff --git a/board/mousse/mousse.h b/board/mousse/mousse.h
index 5468314eb..10a0062a8 100644
--- a/board/mousse/mousse.h
+++ b/board/mousse/mousse.h
@@ -204,17 +204,17 @@
 #define PROMISE_MBAR5  (PROMISE_MBAR0 + 0x5000)
 
 /* ATA/66 Controller offsets */
-#define CFG_ATA_BASE_ADDR     PROMISE_MBAR0
-#define CFG_IDE_MAXBUS	       2 /* ide0/ide1 */
-#define CFG_IDE_MAXDEVICE      2 /* 2 drives per controller */
-#define CFG_ATA_IDE0_OFFSET    0
-#define CFG_ATA_IDE1_OFFSET    0x3000
+#define CONFIG_SYS_ATA_BASE_ADDR     PROMISE_MBAR0
+#define CONFIG_SYS_IDE_MAXBUS	       2 /* ide0/ide1 */
+#define CONFIG_SYS_IDE_MAXDEVICE      2 /* 2 drives per controller */
+#define CONFIG_SYS_ATA_IDE0_OFFSET    0
+#define CONFIG_SYS_ATA_IDE1_OFFSET    0x3000
 /*
  * Definitions for accessing IDE controller registers
  */
-#define CFG_ATA_DATA_OFFSET    0
-#define CFG_ATA_REG_OFFSET     0
-#define CFG_ATA_ALT_OFFSET    (0x1000)
+#define CONFIG_SYS_ATA_DATA_OFFSET    0
+#define CONFIG_SYS_ATA_REG_OFFSET     0
+#define CONFIG_SYS_ATA_ALT_OFFSET    (0x1000)
 
 /*
  * The constants ROM_TEXT_ADRS, ROM_SIZE, RAM_HIGH_ADRS, and RAM_LOW_ADRS
diff --git a/board/mousse/u-boot.lds b/board/mousse/u-boot.lds
index 86a1d85ed..818887380 100644
--- a/board/mousse/u-boot.lds
+++ b/board/mousse/u-boot.lds
@@ -123,6 +123,7 @@ SECTIONS
    *(.dynbss)
    *(.bss)
    *(COMMON)
+   . = ALIGN(4);
   }
 
   _end = . ;
diff --git a/board/mousse/u-boot.lds.ram b/board/mousse/u-boot.lds.ram
index 46b98a04a..d048e52d3 100644
--- a/board/mousse/u-boot.lds.ram
+++ b/board/mousse/u-boot.lds.ram
@@ -96,7 +96,7 @@ SECTIONS
 
   .ppcenv	:
   {
-    common/environment.o (.ppcenv)
+    common/env_embedded.o (.ppcenv)
   } > ram
 
   _end = . ;
diff --git a/board/mousse/u-boot.lds.rom b/board/mousse/u-boot.lds.rom
index 3ba7c3c9a..27d10b6d6 100644
--- a/board/mousse/u-boot.lds.rom
+++ b/board/mousse/u-boot.lds.rom
@@ -60,7 +60,7 @@ SECTIONS
     lib_generic/zlib.o		(.text)
 
 		. = env_offset;
-    common/environment.o (.text)
+    common/env_embedded.o (.text)
 
 		*(.text)
 
diff --git a/board/mp2usb/flash.c b/board/mp2usb/flash.c
index c19d445e2..21a8ef9e5 100644
--- a/board/mp2usb/flash.c
+++ b/board/mp2usb/flash.c
@@ -30,10 +30,10 @@
 #include <common.h>
 #include <linux/byteorder/swab.h>
 
-#define CFG_MAX_FLASH_BANKS	1
+#define CONFIG_SYS_MAX_FLASH_BANKS	1
 #define PHYS_FLASH_SECT_SIZE	0x00020000 /* 128 KB sectors (x1) */
 
-flash_info_t flash_info[CFG_MAX_FLASH_BANKS];	/* info for FLASH chips */
+flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];	/* info for FLASH chips */
 
 #define FLASH_PORT_WIDTH	ushort
 #define FLASH_PORT_WIDTHV	vu_short
@@ -77,7 +77,7 @@ unsigned long flash_init (void)
 	int i;
 	ulong size = 0;
 
-	for (i = 0; i < CFG_MAX_FLASH_BANKS; i++) {
+	for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) {
 		switch (i) {
 		case 0:
 			flash_get_size ((FPW *) PHYS_FLASH_1, &flash_info[i]);
@@ -93,13 +93,13 @@ unsigned long flash_init (void)
 	/* Protect monitor and environment sectors
 	 */
 	flash_protect ( FLAG_PROTECT_SET,
-			CFG_FLASH_BASE,
-			CFG_FLASH_BASE + monitor_flash_len - 1,
+			CONFIG_SYS_FLASH_BASE,
+			CONFIG_SYS_FLASH_BASE + monitor_flash_len - 1,
 			&flash_info[0] );
 
 	flash_protect ( FLAG_PROTECT_SET,
-			CFG_ENV_ADDR,
-			CFG_ENV_ADDR + CFG_ENV_SIZE - 1, &flash_info[0] );
+			CONFIG_ENV_ADDR,
+			CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1, &flash_info[0] );
 
 	return size;
 }
@@ -220,10 +220,10 @@ static ulong flash_get_size (FPW *addr, flash_info_t *info)
 		break;
 	}
 
-	if (info->sector_count > CFG_MAX_FLASH_SECT) {
+	if (info->sector_count > CONFIG_SYS_MAX_FLASH_SECT) {
 		printf ("** ERROR: sector count %d > max (%d) **\n",
-			info->sector_count, CFG_MAX_FLASH_SECT);
-		info->sector_count = CFG_MAX_FLASH_SECT;
+			info->sector_count, CONFIG_SYS_MAX_FLASH_SECT);
+		info->sector_count = CONFIG_SYS_MAX_FLASH_SECT;
 	}
 
 	addr[0] = (FPW) INTEL_RESET;		/* restore read mode */
@@ -303,7 +303,7 @@ int flash_erase (flash_info_t *info, int s_first, int s_last)
 			*addr = (FPW) INTEL_CONFIRM;	/* erase confirm */
 
 			while (((status = *addr) & (FPW) INTEL_FINISHED) != (FPW) INTEL_FINISHED) {
-				if (get_timer_masked () > CFG_FLASH_ERASE_TOUT) {
+				if (get_timer_masked () > CONFIG_SYS_FLASH_ERASE_TOUT) {
 					printf ("Timeout\n");
 					*addr = (FPW) INTEL_SUSPEND;	/* suspend erase     */
 					*addr = (FPW) INTEL_RESET;	/* reset to read mode */
@@ -449,7 +449,7 @@ static int write_data (flash_info_t *info, ulong dest, FPW data)
 
 	/* wait while polling the status register */
 	while (((status = *addr) & (FPW) INTEL_FINISHED) != (FPW) INTEL_FINISHED) {
-		if (get_timer_masked () > CFG_FLASH_WRITE_TOUT) {
+		if (get_timer_masked () > CONFIG_SYS_FLASH_WRITE_TOUT) {
 			*addr = (FPW) INTEL_RESET;	/* restore read mode */
 			return (1);
 		}
@@ -500,7 +500,7 @@ int flash_real_protect(flash_info_t *info, long sector, int prot)
 	reset_timer_masked ();
 
 	while ((*addr & (FPW) INTEL_FINISHED) != (FPW) INTEL_FINISHED) {
-		if (get_timer_masked () > CFG_FLASH_UNLOCK_TOUT) {
+		if (get_timer_masked () > CONFIG_SYS_FLASH_UNLOCK_TOUT) {
 			printf("Flash lock bit operation timed out\n");
 			rc = 1;
 			break;
@@ -532,7 +532,7 @@ int flash_real_protect(flash_info_t *info, long sector, int prot)
 				*addr = (FPW) INTEL_PROTECT;	/* set */
 				while ((*addr & (FPW) INTEL_FINISHED) != (FPW) INTEL_FINISHED)
 				{
-					if (get_timer_masked () > CFG_FLASH_UNLOCK_TOUT)
+					if (get_timer_masked () > CONFIG_SYS_FLASH_UNLOCK_TOUT)
 					{
 						printf("Flash lock bit operation timed out\n");
 						rc = 1;
diff --git a/board/mp2usb/u-boot.lds b/board/mp2usb/u-boot.lds
index 3b7977672..d0666ac73 100644
--- a/board/mp2usb/u-boot.lds
+++ b/board/mp2usb/u-boot.lds
@@ -51,6 +51,6 @@ SECTIONS
 
 	. = ALIGN(4);
 	__bss_start = .;
-	.bss (NOLOAD) : { *(.bss) }
+	.bss (NOLOAD) : { *(.bss) . = ALIGN(4); }
 	_end = .;
 }
diff --git a/board/mpc8540eval/ddr.c b/board/mpc8540eval/ddr.c
index 45372f427..7850794d6 100644
--- a/board/mpc8540eval/ddr.c
+++ b/board/mpc8540eval/ddr.c
@@ -10,6 +10,7 @@
 #include <i2c.h>
 
 #include <asm/fsl_ddr_sdram.h>
+#include <asm/fsl_ddr_dimm_params.h>
 
 static void
 get_spd(ddr1_spd_eeprom_t *spd, unsigned char i2c_address)
@@ -40,7 +41,9 @@ fsl_ddr_get_spd(ddr1_spd_eeprom_t *ctrl_dimms_spd,
 	}
 }
 
-void fsl_ddr_board_options(memctl_options_t *popts, unsigned int ctrl_num)
+void fsl_ddr_board_options(memctl_options_t *popts,
+				dimm_params_t *pdimm,
+				unsigned int ctrl_num)
 {
 	/*
 	 * Factors to consider for CPO:
diff --git a/board/mpc8540eval/flash.c b/board/mpc8540eval/flash.c
index 79eb04ca8..9df5bd9a4 100644
--- a/board/mpc8540eval/flash.c
+++ b/board/mpc8540eval/flash.c
@@ -31,19 +31,19 @@
 
 #include <common.h>
 
-#if !defined(CFG_NO_FLASH)
+#if !defined(CONFIG_SYS_NO_FLASH)
 
-flash_info_t	flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips	*/
+flash_info_t	flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips	*/
 
-#if defined(CFG_ENV_IS_IN_FLASH)
-# ifndef  CFG_ENV_ADDR
-#  define CFG_ENV_ADDR	(CFG_FLASH_BASE + CFG_ENV_OFFSET)
+#if defined(CONFIG_ENV_IS_IN_FLASH)
+# ifndef  CONFIG_ENV_ADDR
+#  define CONFIG_ENV_ADDR	(CONFIG_SYS_FLASH_BASE + CONFIG_ENV_OFFSET)
 # endif
-# ifndef  CFG_ENV_SIZE
-#  define CFG_ENV_SIZE	CFG_ENV_SECT_SIZE
+# ifndef  CONFIG_ENV_SIZE
+#  define CONFIG_ENV_SIZE	CONFIG_ENV_SECT_SIZE
 # endif
-# ifndef  CFG_ENV_SECT_SIZE
-#  define CFG_ENV_SECT_SIZE  CFG_ENV_SIZE
+# ifndef  CONFIG_ENV_SECT_SIZE
+#  define CONFIG_ENV_SECT_SIZE  CONFIG_ENV_SIZE
 # endif
 #endif
 
@@ -74,7 +74,7 @@ unsigned long flash_init (void)
 	/* Init: enable write,
 	 * or we cannot even write flash commands
 	 */
-	for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) {
+	for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
 		flash_info[i].flash_id = FLASH_UNKNOWN;
 
 		/* set the default sector offset */
@@ -82,7 +82,7 @@ unsigned long flash_init (void)
 
 	/* Static FLASH Bank configuration here - FIXME XXX */
 
-	size = flash_get_size((vu_long *)CFG_FLASH_BASE, &flash_info[0]);
+	size = flash_get_size((vu_long *)CONFIG_SYS_FLASH_BASE, &flash_info[0]);
 
 	if (flash_info[0].flash_id == FLASH_UNKNOWN) {
 		printf ("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n",
@@ -90,24 +90,24 @@ unsigned long flash_init (void)
 	}
 
 	/* Re-do sizing to get full correct info */
-	size = flash_get_size((vu_long *)CFG_FLASH_BASE, &flash_info[0]);
+	size = flash_get_size((vu_long *)CONFIG_SYS_FLASH_BASE, &flash_info[0]);
 
 	flash_info[0].size = size;
 
 #if !defined(CONFIG_RAM_AS_FLASH)
-#if CFG_MONITOR_BASE >= CFG_FLASH_BASE
+#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE
 	/* monitor protection ON by default */
 	flash_protect(FLAG_PROTECT_SET,
-		      CFG_MONITOR_BASE,
-		      CFG_MONITOR_BASE+monitor_flash_len-1,
+		      CONFIG_SYS_MONITOR_BASE,
+		      CONFIG_SYS_MONITOR_BASE+monitor_flash_len-1,
 		      &flash_info[0]);
 #endif
 
-#ifdef	CFG_ENV_IS_IN_FLASH
+#ifdef	CONFIG_ENV_IS_IN_FLASH
 	/* ENV protection ON by default */
 	flash_protect(FLAG_PROTECT_SET,
-		      CFG_ENV_ADDR,
-		      CFG_ENV_ADDR+CFG_ENV_SECT_SIZE-1,
+		      CONFIG_ENV_ADDR,
+		      CONFIG_ENV_ADDR+CONFIG_ENV_SECT_SIZE-1,
 		      &flash_info[0]);
 #endif
 #endif
@@ -177,8 +177,8 @@ static ulong flash_get_size (vu_long *addr, flash_info_t *info)
 	udelay(20);
 	asm("sync");
 
-#ifndef CFG_FLASH_CFI
-	printf("Not define CFG_FLASH_CFI\n");
+#ifndef CONFIG_SYS_FLASH_CFI
+	printf("Not define CONFIG_SYS_FLASH_CFI\n");
 	return (0);
 #else
 	value = addr[0];
@@ -237,7 +237,7 @@ static ulong flash_get_size (vu_long *addr, flash_info_t *info)
 			break;
 	}
 #endif
-#endif		/*#ifdef CFG_FLASH_CFI*/
+#endif		/*#ifdef CONFIG_SYS_FLASH_CFI*/
 
 	if (big_endian==0) value = (addr[0] & 0xFF000000) >>8;
 	else value = (addr[0] & 0x00FF0000);
@@ -453,7 +453,7 @@ int	flash_erase (flash_info_t *info, int s_first, int s_last)
 							asm("sync");
 							return 1;
 						}
-						if ((now=get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+						if ((now=get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
 							printf ("Timeout\n");
 							*addr16 = 0xFFFF;	/* reset bank */
 							asm("sync");
@@ -505,7 +505,7 @@ int	flash_erase (flash_info_t *info, int s_first, int s_last)
 							asm("sync");
 							return 1;
 						}
-						if ((now=get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+						if ((now=get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
 							printf ("Timeout\n");
 							*addr = 0xFFFFFFFF;	/* reset bank */
 							asm("sync");
@@ -693,7 +693,7 @@ static int write_block(flash_info_t *info, uchar * src, ulong dest, ulong cnt)
 		/* data polling for D7 */
 		flag  = 0;
 		while (((csr = *addr) & ready) != ready) {
-			if ((now=get_timer(start)) > CFG_FLASH_WRITE_TOUT) {
+			if ((now=get_timer(start)) > CONFIG_SYS_FLASH_WRITE_TOUT) {
 				flag = 1;
 				break;
 			}
@@ -751,7 +751,7 @@ static int write_short (flash_info_t *info, ulong dest, ushort data)
 		/* data polling for D7 */
 		flag  = 0;
 		while (((csr = *addr) & ready) != ready) {
-			if ((now=get_timer(start)) > CFG_FLASH_WRITE_TOUT) {
+			if ((now=get_timer(start)) > CONFIG_SYS_FLASH_WRITE_TOUT) {
 				flag = 1;
 				break;
 			}
@@ -815,7 +815,7 @@ static int write_word (flash_info_t *info, ulong dest, ulong data)
 		start = get_timer (0);
 		flag  = 0;
 		while (((csr = *addr) & ready) != ready) {
-			if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+			if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
 				flag = 1;
 				break;
 			}
@@ -881,7 +881,7 @@ static int clear_block_lock_bit(flash_info_t * info, vu_long  * addr)
 	*addr = 0x70707070;	/* read status */
 	start = get_timer (0);
 	while((*addr & ready) != ready){
-		if ((now=get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+		if ((now=get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
 			printf ("Timeout on clearing Block Lock Bit\n");
 			*addr = 0xFFFFFFFF;	/* reset bank */
 			asm("sync");
@@ -891,4 +891,4 @@ static int clear_block_lock_bit(flash_info_t * info, vu_long  * addr)
 	return 0;
 }
 
-#endif /* !CFG_NO_FLASH */
+#endif /* !CONFIG_SYS_NO_FLASH */
diff --git a/board/mpc8540eval/law.c b/board/mpc8540eval/law.c
index cfcd73e9e..9926d25ef 100644
--- a/board/mpc8540eval/law.c
+++ b/board/mpc8540eval/law.c
@@ -43,11 +43,11 @@
 
 struct law_entry law_table[] = {
 #ifndef CONFIG_SPD_EEPROM
-	SET_LAW(CFG_DDR_SDRAM_BASE, LAW_SIZE_128M, LAW_TRGT_IF_DDR),
+	SET_LAW(CONFIG_SYS_DDR_SDRAM_BASE, LAW_SIZE_128M, LAW_TRGT_IF_DDR),
 #endif
-	SET_LAW(CFG_PCI_MEM_PHYS, LAW_SIZE_256M, LAW_TRGT_IF_PCI),
+	SET_LAW(CONFIG_SYS_PCI_MEM_PHYS, LAW_SIZE_256M, LAW_TRGT_IF_PCI),
 #ifndef CONFIG_RAM_AS_FLASH
-	SET_LAW(CFG_LBC_SDRAM_BASE, LAW_SIZE_128M, LAW_TRGT_IF_LBC),
+	SET_LAW(CONFIG_SYS_LBC_SDRAM_BASE, LAW_SIZE_128M, LAW_TRGT_IF_LBC),
 #endif
 };
 
diff --git a/board/mpc8540eval/mpc8540eval.c b/board/mpc8540eval/mpc8540eval.c
index 7c54458a5..fa0a33686 100644
--- a/board/mpc8540eval/mpc8540eval.c
+++ b/board/mpc8540eval/mpc8540eval.c
@@ -24,6 +24,7 @@
  */
 
 #include <common.h>
+#include <netdev.h>
 #include <asm/processor.h>
 #include <asm/mmu.h>
 #include <asm/immap_85xx.h>
@@ -35,7 +36,7 @@ long int fixed_sdram (void);
 int board_pre_init (void)
 {
 #if defined(CONFIG_PCI)
-	volatile ccsr_pcix_t *pci = (void *)(CFG_MPC85xx_PCIX_ADDR);
+	volatile ccsr_pcix_t *pci = (void *)(CONFIG_SYS_MPC85xx_PCIX_ADDR);
 
 	pci->peer &= 0xffffffdf; /* disable master abort */
 #endif
@@ -52,10 +53,10 @@ int checkboard (void)
 	printf ("\tCPU: %lu MHz\n", sysinfo.freqProcessor / 1000000);
 	printf ("\tCCB: %lu MHz\n", sysinfo.freqSystemBus / 1000000);
 	printf ("\tDDR: %lu MHz\n", sysinfo.freqSystemBus / 2000000);
-	if((CFG_LBC_LCRR & 0x0f) == 2 || (CFG_LBC_LCRR & 0x0f) == 4 \
-		|| (CFG_LBC_LCRR & 0x0f) == 8) {
+	if((CONFIG_SYS_LBC_LCRR & 0x0f) == 2 || (CONFIG_SYS_LBC_LCRR & 0x0f) == 4 \
+		|| (CONFIG_SYS_LBC_LCRR & 0x0f) == 8) {
 		printf ("\tLBC: %lu MHz\n",
-			sysinfo.freqSystemBus / 1000000/(CFG_LBC_LCRR & 0x0f));
+			sysinfo.freqSystemBus / 1000000/(CONFIG_SYS_LBC_LCRR & 0x0f));
 	} else {
 		printf("\tLBC: unknown\n");
 	}
@@ -68,12 +69,12 @@ phys_size_t initdram (int board_type)
 	long dram_size = 0;
 
 #if !defined(CONFIG_RAM_AS_FLASH)
-	volatile ccsr_lbc_t *lbc = (void *)(CFG_MPC85xx_LBC_ADDR);
+	volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR);
 	sys_info_t sysinfo;
 	uint temp_lbcdll = 0;
 #endif
 #if !defined(CONFIG_RAM_AS_FLASH) || defined(CONFIG_DDR_DLL)
-	volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR);
+	volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
 #endif
 
 #if defined(CONFIG_DDR_DLL)
@@ -93,42 +94,42 @@ phys_size_t initdram (int board_type)
 	dram_size = fixed_sdram ();
 #endif
 
-#if defined(CFG_RAMBOOT)
+#if defined(CONFIG_SYS_RAMBOOT)
 	return dram_size;
 #endif
 
 #if !defined(CONFIG_RAM_AS_FLASH) /* LocalBus is not emulating flash */
 	get_sys_info(&sysinfo);
-	/* if localbus freq is less than 66Mhz,we use bypass mode,otherwise use DLL */
-	if(sysinfo.freqSystemBus/(CFG_LBC_LCRR & 0x0f) < 66000000) {
-		lbc->lcrr = (CFG_LBC_LCRR & 0x0fffffff)| 0x80000000;
+	/* if localbus freq is less than 66MHz,we use bypass mode,otherwise use DLL */
+	if(sysinfo.freqSystemBus/(CONFIG_SYS_LBC_LCRR & 0x0f) < 66000000) {
+		lbc->lcrr = (CONFIG_SYS_LBC_LCRR & 0x0fffffff)| 0x80000000;
 	} else {
-		lbc->lcrr = CFG_LBC_LCRR & 0x7fffffff;
+		lbc->lcrr = CONFIG_SYS_LBC_LCRR & 0x7fffffff;
 		udelay(200);
 		temp_lbcdll = gur->lbcdllcr;
 		gur->lbcdllcr = ((temp_lbcdll & 0xff) << 16 ) | 0x80000000;
 		asm("sync;isync;msync");
 	}
-	lbc->or2 = CFG_OR2_PRELIM; /* 64MB SDRAM */
-	lbc->br2 = CFG_BR2_PRELIM;
-	lbc->lbcr = CFG_LBC_LBCR;
-	lbc->lsdmr = CFG_LBC_LSDMR_1;
+	lbc->or2 = CONFIG_SYS_OR2_PRELIM; /* 64MB SDRAM */
+	lbc->br2 = CONFIG_SYS_BR2_PRELIM;
+	lbc->lbcr = CONFIG_SYS_LBC_LBCR;
+	lbc->lsdmr = CONFIG_SYS_LBC_LSDMR_1;
 	asm("sync");
 	* (ulong *)0 = 0x000000ff;
-	lbc->lsdmr = CFG_LBC_LSDMR_2;
+	lbc->lsdmr = CONFIG_SYS_LBC_LSDMR_2;
 	asm("sync");
 	* (ulong *)0 = 0x000000ff;
-	lbc->lsdmr = CFG_LBC_LSDMR_3;
+	lbc->lsdmr = CONFIG_SYS_LBC_LSDMR_3;
 	asm("sync");
 	* (ulong *)0 = 0x000000ff;
-	lbc->lsdmr = CFG_LBC_LSDMR_4;
+	lbc->lsdmr = CONFIG_SYS_LBC_LSDMR_4;
 	asm("sync");
 	* (ulong *)0 = 0x000000ff;
-	lbc->lsdmr = CFG_LBC_LSDMR_5;
+	lbc->lsdmr = CONFIG_SYS_LBC_LSDMR_5;
 	asm("sync");
-	lbc->lsrt = CFG_LBC_LSRT;
+	lbc->lsrt = CONFIG_SYS_LBC_LSRT;
 	asm("sync");
-	lbc->mrtpr = CFG_LBC_MRTPR;
+	lbc->mrtpr = CONFIG_SYS_LBC_MRTPR;
 	asm("sync");
 #endif
 
@@ -138,7 +139,7 @@ phys_size_t initdram (int board_type)
 		 * enable errors */
 		uint *p = 0;
 		uint i = 0;
-		volatile ccsr_ddr_t *ddr= (void *)(CFG_MPC85xx_DDR_ADDR);
+		volatile ccsr_ddr_t *ddr= (void *)(CONFIG_SYS_MPC85xx_DDR_ADDR);
 		dma_init();
 		for (*p = 0; p < (uint *)(8 * 1024); p++) {
 			if (((unsigned int)p & 0x1f) == 0) { dcbz(p); }
@@ -180,11 +181,11 @@ phys_size_t initdram (int board_type)
 	return dram_size;
 }
 
-#if defined(CFG_DRAM_TEST)
+#if defined(CONFIG_SYS_DRAM_TEST)
 int testdram (void)
 {
-	uint *pstart = (uint *) CFG_MEMTEST_START;
-	uint *pend = (uint *) CFG_MEMTEST_END;
+	uint *pstart = (uint *) CONFIG_SYS_MEMTEST_START;
+	uint *pend = (uint *) CONFIG_SYS_MEMTEST_END;
 	uint *p;
 
 	printf("SDRAM test phase 1:\n");
@@ -220,15 +221,15 @@ int testdram (void)
  ************************************************************************/
 long int fixed_sdram (void)
 {
-#ifndef CFG_RAMBOOT
-	volatile ccsr_ddr_t *ddr= (void *)(CFG_MPC85xx_DDR_ADDR);
-
-	ddr->cs0_bnds = CFG_DDR_CS0_BNDS;
-	ddr->cs0_config = CFG_DDR_CS0_CONFIG;
-	ddr->timing_cfg_1 = CFG_DDR_TIMING_1;
-	ddr->timing_cfg_2 = CFG_DDR_TIMING_2;
-	ddr->sdram_mode = CFG_DDR_MODE;
-	ddr->sdram_interval = CFG_DDR_INTERVAL;
+#ifndef CONFIG_SYS_RAMBOOT
+	volatile ccsr_ddr_t *ddr= (void *)(CONFIG_SYS_MPC85xx_DDR_ADDR);
+
+	ddr->cs0_bnds = CONFIG_SYS_DDR_CS0_BNDS;
+	ddr->cs0_config = CONFIG_SYS_DDR_CS0_CONFIG;
+	ddr->timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1;
+	ddr->timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2;
+	ddr->sdram_mode = CONFIG_SYS_DDR_MODE;
+	ddr->sdram_interval = CONFIG_SYS_DDR_INTERVAL;
 #if defined (CONFIG_DDR_ECC)
 	ddr->err_disable = 0x0000000D;
 	ddr->err_sbe = 0x00ff0000;
@@ -237,13 +238,24 @@ long int fixed_sdram (void)
 	udelay(500);
 #if defined (CONFIG_DDR_ECC)
 	/* Enable ECC checking */
-	ddr->sdram_cfg = (CFG_DDR_CONTROL | 0x20000000);
+	ddr->sdram_cfg = (CONFIG_SYS_DDR_CONTROL | 0x20000000);
 #else
-	ddr->sdram_cfg = CFG_DDR_CONTROL;
+	ddr->sdram_cfg = CONFIG_SYS_DDR_CONTROL;
 #endif
 	asm("sync; isync; msync");
 	udelay(500);
 #endif
-	return (CFG_SDRAM_SIZE * 1024 * 1024);
+	return (CONFIG_SYS_SDRAM_SIZE * 1024 * 1024);
 }
 #endif	/* !defined(CONFIG_SPD_EEPROM) */
+
+int board_eth_init(bd_t *bis)
+{
+	/*
+	 * This board either has PCI NICs or uses the CPU's TSECs
+	 * pci_eth_init() will return 0 if no NICs found, so in that case
+	 * returning -1 will force cpu_eth_init() to be called.
+	 */
+	int num = pci_eth_init(bis);
+	return (num <= 0 ? -1 : num);
+}
diff --git a/board/mpc8540eval/tlb.c b/board/mpc8540eval/tlb.c
index 1003bf613..06092f89b 100644
--- a/board/mpc8540eval/tlb.c
+++ b/board/mpc8540eval/tlb.c
@@ -27,34 +27,34 @@
 #include <asm/mmu.h>
 
 struct fsl_e_tlb_entry tlb_table[] = {
-	SET_TLB_ENTRY(1, CFG_CCSRBAR, CFG_CCSRBAR_PHYS,
+	SET_TLB_ENTRY(1, CONFIG_SYS_CCSRBAR, CONFIG_SYS_CCSRBAR_PHYS,
 		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 		      0, 1, BOOKE_PAGESZ_1M, 1),
 
-  #if defined(CFG_FLASH_PORT_WIDTH_16)
-	SET_TLB_ENTRY(1, CFG_FLASH_BASE, CFG_FLASH_BASE,
+  #if defined(CONFIG_SYS_FLASH_PORT_WIDTH_16)
+	SET_TLB_ENTRY(1, CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE,
 		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 		      0, 2, BOOKE_PAGESZ_4M, 1),
-	SET_TLB_ENTRY(1, CFG_FLASH_BASE + 0x400000, CFG_FLASH_BASE + 0x400000,
+	SET_TLB_ENTRY(1, CONFIG_SYS_FLASH_BASE + 0x400000, CONFIG_SYS_FLASH_BASE + 0x400000,
 		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 		      0, 3, BOOKE_PAGESZ_4M, 1),
   #else
-	SET_TLB_ENTRY(1, CFG_FLASH_BASE, CFG_FLASH_BASE,
+	SET_TLB_ENTRY(1, CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE,
 		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 		      0, 2, BOOKE_PAGESZ_16M, 1),
   #endif
 
   #if !defined(CONFIG_SPD_EEPROM)
-	SET_TLB_ENTRY(1, CFG_DDR_SDRAM_BASE, CFG_DDR_SDRAM_BASE,
+	SET_TLB_ENTRY(1, CONFIG_SYS_DDR_SDRAM_BASE, CONFIG_SYS_DDR_SDRAM_BASE,
 		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
 		      0, 4, BOOKE_PAGESZ_64M, 1),
 
-	SET_TLB_ENTRY(1, CFG_DDR_SDRAM_BASE + 0x4000000, CFG_DDR_SDRAM_BASE + 0x4000000,
+	SET_TLB_ENTRY(1, CONFIG_SYS_DDR_SDRAM_BASE + 0x4000000, CONFIG_SYS_DDR_SDRAM_BASE + 0x4000000,
 		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
 		      0, 5, BOOKE_PAGESZ_64M, 1),
   #endif
 
-	SET_TLB_ENTRY(1, CFG_LBC_SDRAM_BASE, CFG_LBC_SDRAM_BASE,
+	SET_TLB_ENTRY(1, CONFIG_SYS_LBC_SDRAM_BASE, CONFIG_SYS_LBC_SDRAM_BASE,
   #if defined(CONFIG_RAM_AS_FLASH)
 		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
   #else
@@ -62,15 +62,15 @@ struct fsl_e_tlb_entry tlb_table[] = {
   #endif
 		      0, 6, BOOKE_PAGESZ_64M, 1),
 
-	SET_TLB_ENTRY(1, CFG_INIT_RAM_ADDR, CFG_INIT_RAM_ADDR,
+	SET_TLB_ENTRY(1, CONFIG_SYS_INIT_RAM_ADDR, CONFIG_SYS_INIT_RAM_ADDR,
 		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
 		      0, 7, BOOKE_PAGESZ_16K, 1),
 
-	SET_TLB_ENTRY(1, CFG_PCI_MEM_PHYS, CFG_PCI_MEM_PHYS,
+	SET_TLB_ENTRY(1, CONFIG_SYS_PCI_MEM_PHYS, CONFIG_SYS_PCI_MEM_PHYS,
 		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 		      0, 8, BOOKE_PAGESZ_256M, 1),
 
-	SET_TLB_ENTRY(1, CFG_BCSR, CFG_BCSR,
+	SET_TLB_ENTRY(1, CONFIG_SYS_BCSR, CONFIG_SYS_BCSR,
 		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 		      0, 9, BOOKE_PAGESZ_16K, 1),
 };
diff --git a/board/mpc8540eval/u-boot.lds b/board/mpc8540eval/u-boot.lds
index dadfc7dee..d65ccbef4 100644
--- a/board/mpc8540eval/u-boot.lds
+++ b/board/mpc8540eval/u-boot.lds
@@ -133,6 +133,7 @@ SECTIONS
    *(.dynbss)
    *(.bss)
    *(COMMON)
+   . = ALIGN(4);
   }
   _end = . ;
   PROVIDE (end = .);
diff --git a/board/mpl/common/common_util.c b/board/mpl/common/common_util.c
index 24ce80785..877a2d004 100644
--- a/board/mpl/common/common_util.c
+++ b/board/mpl/common/common_util.c
@@ -53,7 +53,7 @@ extern int gunzip(void *, int, uchar *, unsigned long *);
 extern int mem_test(ulong start, ulong ramsize, int quiet);
 
 #define I2C_BACKUP_ADDR 0x7C00		/* 0x200 bytes for backup */
-#define IMAGE_SIZE CFG_MONITOR_LEN	/* ugly, but it works for now */
+#define IMAGE_SIZE CONFIG_SYS_MONITOR_LEN	/* ugly, but it works for now */
 
 extern flash_info_t flash_info[];	/* info for FLASH chips */
 
@@ -270,7 +270,7 @@ mpl_prg_image(uchar *ld_addr)
 #if !defined(CONFIG_PATI)
 void get_backup_values(backup_t *buf)
 {
-	i2c_read(CFG_DEF_EEPROM_ADDR, I2C_BACKUP_ADDR,2,(void *)buf,sizeof(backup_t));
+	i2c_read(CONFIG_SYS_DEF_EEPROM_ADDR, I2C_BACKUP_ADDR,2,(void *)buf,sizeof(backup_t));
 }
 
 void set_backup_values(int overwrite)
@@ -298,7 +298,7 @@ void set_backup_values(int overwrite)
 		return;
 	}
 	back.eth_addr[20]=0;
-	i2c_write(CFG_DEF_EEPROM_ADDR, I2C_BACKUP_ADDR,2,(void *)&back,sizeof(backup_t));
+	i2c_write(CONFIG_SYS_DEF_EEPROM_ADDR, I2C_BACKUP_ADDR,2,(void *)&back,sizeof(backup_t));
 }
 
 void clear_env_values(void)
@@ -308,8 +308,8 @@ void clear_env_values(void)
 
 	memset(&back,0xff,sizeof(backup_t));
 	memset(env_crc,0x00,4);
-	i2c_write(CFG_DEF_EEPROM_ADDR,I2C_BACKUP_ADDR,2,(void *)&back,sizeof(backup_t));
-	i2c_write(CFG_DEF_EEPROM_ADDR,CFG_ENV_OFFSET,2,(void *)env_crc,4);
+	i2c_write(CONFIG_SYS_DEF_EEPROM_ADDR,I2C_BACKUP_ADDR,2,(void *)&back,sizeof(backup_t));
+	i2c_write(CONFIG_SYS_DEF_EEPROM_ADDR,CONFIG_ENV_OFFSET,2,(void *)env_crc,4);
 }
 
 /*
@@ -322,8 +322,8 @@ int check_env_old_size(ulong oldsize)
 	uchar buf[64];
 
 	/* read old CRC */
-	eeprom_read (CFG_DEF_EEPROM_ADDR,
-		     CFG_ENV_OFFSET,
+	eeprom_read (CONFIG_SYS_DEF_EEPROM_ADDR,
+		     CONFIG_ENV_OFFSET,
 		     (uchar *)&crc, sizeof(ulong));
 
 	new = 0;
@@ -333,7 +333,7 @@ int check_env_old_size(ulong oldsize)
 	while (len > 0) {
 		int n = (len > sizeof(buf)) ? sizeof(buf) : len;
 
-		eeprom_read (CFG_DEF_EEPROM_ADDR, CFG_ENV_OFFSET+off, buf, n);
+		eeprom_read (CONFIG_SYS_DEF_EEPROM_ADDR, CONFIG_ENV_OFFSET+off, buf, n);
 		new = crc32 (new, buf, n);
 		len -= n;
 		off += n;
@@ -362,7 +362,7 @@ void copy_old_env(ulong size)
 	len=size;
 	off = sizeof(long);
 	while (len > off) {
-		eeprom_read (CFG_DEF_EEPROM_ADDR, CFG_ENV_OFFSET+off, &c, 1);
+		eeprom_read (CONFIG_SYS_DEF_EEPROM_ADDR, CONFIG_ENV_OFFSET+off, &c, 1);
 		if(c != '=') {
 			*name++=c;
 			off++;
@@ -371,7 +371,7 @@ void copy_old_env(ulong size)
 			*name++='\0';
 			off++;
 			do {
-				eeprom_read (CFG_DEF_EEPROM_ADDR, CFG_ENV_OFFSET+off, &c, 1);
+				eeprom_read (CONFIG_SYS_DEF_EEPROM_ADDR, CONFIG_ENV_OFFSET+off, &c, 1);
 				*value++=c;
 				off++;
 				if(c == '\0')
@@ -485,7 +485,7 @@ int do_mplcommon(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 			}
 			else {
 				local_args[1] = NULL;
-				ld_addr=CFG_LOAD_ADDR;
+				ld_addr=CONFIG_SYS_LOAD_ADDR;
 				result=do_fdcboot(cmdtp, 0, 1, local_args);
 			}
 			result=mpl_prg_image((uchar *)ld_addr);
@@ -519,14 +519,14 @@ int do_mplcommon(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 			result = (int)simple_strtol(argv[2], NULL, 16);
 	    }
 	    src=(unsigned long)&result;
-	    src-=CFG_MEMTEST_START;
+	    src-=CONFIG_SYS_MEMTEST_START;
 	    src-=(100*1024); /* - 100k */
 	    src&=0xfff00000;
 	    size=0;
 	    do {
 		size++;
 			printf("\n\nPass %ld\n",size);
-			mem_test(CFG_MEMTEST_START,src,1);
+			mem_test(CONFIG_SYS_MEMTEST_START,src,1);
 			if(ctrlc())
 				break;
 			if(result>0)
@@ -565,7 +565,6 @@ int do_mplcommon(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 
 
 #if defined(CONFIG_CMD_DOC)
-extern void doc_probe(ulong physadr);
 void doc_init (void)
 {
   doc_probe(MULTI_PURPOSE_SOCKET_ADDR);
@@ -592,7 +591,7 @@ void video_get_info_str (int line_number, char *info)
 	int i,boot;
 	unsigned long pvr;
 	char buf[64];
-	char tmp[16];
+	char buf1[32], buf2[32], buf3[32], buf4[32];
 	char cpustr[16];
 	char *s, *e, bc;
 	switch (line_number)
@@ -645,11 +644,12 @@ void video_get_info_str (int line_number, char *info)
 			}
 			buf[i++]=0;
 		}
-		sprintf (info," %s %s %s MHz (%lu/%lu/%lu MHz)",
+		sprintf (info," %s %s %s MHz (%s/%s/%s MHz)",
 			buf, cpustr,
-			strmhz (tmp, gd->cpu_clk), sys_info.freqPLB / 1000000,
-			sys_info.freqPLB / sys_info.pllOpbDiv / 1000000,
-			sys_info.freqPLB / sys_info.pllExtBusDiv / 1000000);
+			strmhz (buf1, gd->cpu_clk),
+			strmhz (buf2, sys_info.freqPLB),
+			strmhz (buf3, sys_info.freqPLB / sys_info.pllOpbDiv),
+			strmhz (buf4, sys_info.freqPLB / sys_info.pllExtBusDiv));
 		return;
 	case 3:
 		/* Memory Info */
diff --git a/board/mpl/common/flash.c b/board/mpl/common/flash.c
index eb2702b6d..302d7a3d5 100644
--- a/board/mpl/common/flash.c
+++ b/board/mpl/common/flash.c
@@ -52,7 +52,7 @@
 #include <mpc5xx.h>
 #endif
 
-flash_info_t	flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips	*/
+flash_info_t	flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips	*/
 /*-----------------------------------------------------------------------
  * Functions
  */
@@ -89,7 +89,7 @@ void unlock_intel_sectors(flash_info_t *info,ulong addr,ulong cnt);
  * The board_init_r will fill in wrong values in the board init structure,
  * but this will be fixed in the misc_init_r routine:
  * bd->bi_flashstart=0-flash_info[0].size
- * bd->bi_flashsize=flash_info[0].size-CFG_MONITOR_LEN
+ * bd->bi_flashsize=flash_info[0].size-CONFIG_SYS_MONITOR_LEN
  * bd->bi_flashoffset=0
  *
  */
@@ -174,13 +174,13 @@ unsigned long flash_init (void)
 			"MPS" : "Flash");
 #endif /* #if !defined(CONFIG_PATI) */
 	/* Init: no FLASHes known */
-	for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) {
+	for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
 		flash_info[i].flash_id = FLASH_UNKNOWN;
 	}
 
 	/* Static FLASH Bank configuration here - FIXME XXX */
 
-	size_b0 = flash_get_size((vu_long *)CFG_MONITOR_BASE, &flash_info[0]);
+	size_b0 = flash_get_size((vu_long *)CONFIG_SYS_MONITOR_BASE, &flash_info[0]);
 
 	if (flash_info[0].flash_id == FLASH_UNKNOWN) {
 		printf ("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n",
@@ -188,10 +188,10 @@ unsigned long flash_init (void)
 	}
 	/* protect the bootloader */
 	/* Monitor protection ON by default */
-#if CFG_MONITOR_BASE >= CFG_FLASH_BASE
+#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE
 	flash_protect(FLAG_PROTECT_SET,
-			CFG_MONITOR_BASE,
-			CFG_MONITOR_BASE+monitor_flash_len-1,
+			CONFIG_SYS_MONITOR_BASE,
+			CONFIG_SYS_MONITOR_BASE+monitor_flash_len-1,
 			&flash_info[0]);
 #endif
 #if !defined(CONFIG_PATI)
@@ -256,11 +256,11 @@ unsigned long flash_init (void)
 		p++;
 	}
 #else /* #if !defined(CONFIG_PATI) */
-#ifdef	CFG_ENV_IS_IN_FLASH
+#ifdef	CONFIG_ENV_IS_IN_FLASH
 	/* ENV protection ON by default */
 	flash_protect(FLAG_PROTECT_SET,
-		      CFG_ENV_ADDR,
-		      CFG_ENV_ADDR+CFG_ENV_SECT_SIZE-1,
+		      CONFIG_ENV_ADDR,
+		      CONFIG_ENV_ADDR+CONFIG_ENV_SECT_SIZE-1,
 		      &flash_info[0]);
 #endif
 #endif /* #if !defined(CONFIG_PATI) */
@@ -555,7 +555,7 @@ int wait_for_DQ7(flash_info_t *info, int sect)
 	start = get_timer (0);
 	last  = start;
 	while ((addr[0] & (FLASH_WORD_SIZE)0x00800080) != (FLASH_WORD_SIZE)0x00800080) {
-		if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+		if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
 			printf ("Timeout\n");
 			return ERR_TIMOUT;
 		}
@@ -576,7 +576,7 @@ int intel_wait_for_DQ7(flash_info_t *info, int sect)
 	start = get_timer (0);
 	last  = start;
 	while ((addr[0] & (FLASH_WORD_SIZE)0x00800080) != (FLASH_WORD_SIZE)0x00800080) {
-		if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+		if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
 			printf ("Timeout\n");
 			return ERR_TIMOUT;
 		}
@@ -848,7 +848,7 @@ static int write_word (flash_info_t *info, ulong dest, ulong data)
 			udelay(10);
 			while ((dest2[i] & (FLASH_WORD_SIZE)0x00800080) != (FLASH_WORD_SIZE)0x00800080)
 			{
-				if (get_timer(start) > CFG_FLASH_WRITE_TOUT)
+				if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT)
 					return (1);
 			}
 			dest2[i] = (FLASH_WORD_SIZE)0x00FF00FF; /* return to read mode */
@@ -869,7 +869,7 @@ static int write_word (flash_info_t *info, ulong dest, ulong data)
 			start = get_timer (0);
 			while ((dest2[i] & (FLASH_WORD_SIZE)0x00800080) !=
 				(data2[i] & (FLASH_WORD_SIZE)0x00800080)) {
-				if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+				if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
 					return (1);
 				}
 			}
diff --git a/board/mpl/common/isa.c b/board/mpl/common/isa.c
index 51b2773c7..91829d44f 100644
--- a/board/mpl/common/isa.c
+++ b/board/mpl/common/isa.c
@@ -113,9 +113,9 @@ const SIO_LOGDEV_TABLE sio_keyboard[] = {
 ********************************************************************************/
 unsigned char open_cfg_super_IO(int address)
 {
-	out8(CFG_ISA_IO_BASE_ADDRESS | address,0x55); /* open config */
-	out8(CFG_ISA_IO_BASE_ADDRESS | address,0x20); /* set address to DEV ID */
-	if(in8(CFG_ISA_IO_BASE_ADDRESS | address | 0x1)==0x40) /* ok Device ID is correct */
+	out8(CONFIG_SYS_ISA_IO_BASE_ADDRESS | address,0x55); /* open config */
+	out8(CONFIG_SYS_ISA_IO_BASE_ADDRESS | address,0x20); /* set address to DEV ID */
+	if(in8(CONFIG_SYS_ISA_IO_BASE_ADDRESS | address | 0x1)==0x40) /* ok Device ID is correct */
 		return TRUE;
 	else
 		return FALSE;
@@ -123,26 +123,26 @@ unsigned char open_cfg_super_IO(int address)
 
 void close_cfg_super_IO(int address)
 {
-	out8(CFG_ISA_IO_BASE_ADDRESS | address,0xAA); /* close config */
+	out8(CONFIG_SYS_ISA_IO_BASE_ADDRESS | address,0xAA); /* close config */
 }
 
 
 unsigned char read_cfg_super_IO(int address, unsigned char function, unsigned char regaddr)
 {
 	/* assuming config reg is open */
-	out8(CFG_ISA_IO_BASE_ADDRESS | address,0x7); /* points to the function reg */
-	out8(CFG_ISA_IO_BASE_ADDRESS | address | 1,function); /* set the function no */
-	out8(CFG_ISA_IO_BASE_ADDRESS | address,regaddr); /* sets the address in the function */
-	return in8(CFG_ISA_IO_BASE_ADDRESS | address | 1);
+	out8(CONFIG_SYS_ISA_IO_BASE_ADDRESS | address,0x7); /* points to the function reg */
+	out8(CONFIG_SYS_ISA_IO_BASE_ADDRESS | address | 1,function); /* set the function no */
+	out8(CONFIG_SYS_ISA_IO_BASE_ADDRESS | address,regaddr); /* sets the address in the function */
+	return in8(CONFIG_SYS_ISA_IO_BASE_ADDRESS | address | 1);
 }
 
 void write_cfg_super_IO(int address, unsigned char function, unsigned char regaddr, unsigned char data)
 {
 	/* assuming config reg is open */
-	out8(CFG_ISA_IO_BASE_ADDRESS | address,0x7); /* points to the function reg */
-	out8(CFG_ISA_IO_BASE_ADDRESS | address | 1,function); /* set the function no */
-	out8(CFG_ISA_IO_BASE_ADDRESS | address,regaddr); /* sets the address in the function */
-	out8(CFG_ISA_IO_BASE_ADDRESS | address | 1,data); /* writes the data */
+	out8(CONFIG_SYS_ISA_IO_BASE_ADDRESS | address,0x7); /* points to the function reg */
+	out8(CONFIG_SYS_ISA_IO_BASE_ADDRESS | address | 1,function); /* set the function no */
+	out8(CONFIG_SYS_ISA_IO_BASE_ADDRESS | address,regaddr); /* sets the address in the function */
+	out8(CONFIG_SYS_ISA_IO_BASE_ADDRESS | address | 1,data); /* writes the data */
 }
 
 void isa_write_table(SIO_LOGDEV_TABLE *ldt,unsigned char ldev)
@@ -208,12 +208,12 @@ static unsigned int cached_irq_mask = 0xfff9;
 
 #define cached_imr1	(unsigned char)cached_irq_mask
 #define cached_imr2	(unsigned char)(cached_irq_mask>>8)
-#define IMR_1		CFG_ISA_IO_BASE_ADDRESS + PIIX4_ISA_INT1_OCW1
-#define IMR_2		CFG_ISA_IO_BASE_ADDRESS + PIIX4_ISA_INT2_OCW1
-#define ICW1_1	CFG_ISA_IO_BASE_ADDRESS + PIIX4_ISA_INT1_ICW1
-#define ICW1_2	CFG_ISA_IO_BASE_ADDRESS + PIIX4_ISA_INT2_ICW1
-#define ICW2_1	CFG_ISA_IO_BASE_ADDRESS + PIIX4_ISA_INT1_ICW2
-#define ICW2_2	CFG_ISA_IO_BASE_ADDRESS + PIIX4_ISA_INT2_ICW2
+#define IMR_1		CONFIG_SYS_ISA_IO_BASE_ADDRESS + PIIX4_ISA_INT1_OCW1
+#define IMR_2		CONFIG_SYS_ISA_IO_BASE_ADDRESS + PIIX4_ISA_INT2_OCW1
+#define ICW1_1	CONFIG_SYS_ISA_IO_BASE_ADDRESS + PIIX4_ISA_INT1_ICW1
+#define ICW1_2	CONFIG_SYS_ISA_IO_BASE_ADDRESS + PIIX4_ISA_INT2_ICW1
+#define ICW2_1	CONFIG_SYS_ISA_IO_BASE_ADDRESS + PIIX4_ISA_INT1_ICW2
+#define ICW2_2	CONFIG_SYS_ISA_IO_BASE_ADDRESS + PIIX4_ISA_INT2_ICW2
 #define ICW3_1	ICW2_1
 #define ICW3_2	ICW2_2
 #define ICW4_1	ICW2_1
diff --git a/board/mpl/common/kbd.c b/board/mpl/common/kbd.c
index b20b9532b..a457635d4 100644
--- a/board/mpl/common/kbd.c
+++ b/board/mpl/common/kbd.c
@@ -203,7 +203,7 @@ int isa_kbd_init(void)
 	}
 }
 
-#ifdef CFG_CONSOLE_OVERWRITE_ROUTINE
+#ifdef CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
 extern int overwrite_console (void);
 #else
 int overwrite_console (void)
@@ -452,22 +452,22 @@ unsigned char handle_kbd_event(void)
  */
 unsigned char kbd_read_status(void)
 {
-	return(in8(CFG_ISA_IO_BASE_ADDRESS + KDB_COMMAND_PORT));
+	return(in8(CONFIG_SYS_ISA_IO_BASE_ADDRESS + KDB_COMMAND_PORT));
 }
 
 unsigned char kbd_read_input(void)
 {
-	return(in8(CFG_ISA_IO_BASE_ADDRESS + KDB_DATA_PORT));
+	return(in8(CONFIG_SYS_ISA_IO_BASE_ADDRESS + KDB_DATA_PORT));
 }
 
 void kbd_write_command(unsigned char cmd)
 {
-	out8(CFG_ISA_IO_BASE_ADDRESS + KDB_COMMAND_PORT,cmd);
+	out8(CONFIG_SYS_ISA_IO_BASE_ADDRESS + KDB_COMMAND_PORT,cmd);
 }
 
 void kbd_write_output(unsigned char data)
 {
-	out8(CFG_ISA_IO_BASE_ADDRESS + KDB_DATA_PORT, data);
+	out8(CONFIG_SYS_ISA_IO_BASE_ADDRESS + KDB_DATA_PORT, data);
 }
 
 int kbd_read_data(void)
diff --git a/board/mpl/common/usb_uhci.c b/board/mpl/common/usb_uhci.c
index 666b999e3..a0094372a 100644
--- a/board/mpl/common/usb_uhci.c
+++ b/board/mpl/common/usb_uhci.c
@@ -621,7 +621,7 @@ int usb_lowlevel_init(void)
 	pci_read_config_dword(busdevfunc,PCI_BASE_ADDRESS_4,&usb_base_addr);
 	USB_UHCI_PRINTF("IO Base Address = 0x%lx\n",usb_base_addr);
 	usb_base_addr&=0xFFFFFFF0;
-	usb_base_addr+=CFG_ISA_IO_BASE_ADDRESS;
+	usb_base_addr+=CONFIG_SYS_ISA_IO_BASE_ADDRESS;
 	rh.devnum = 0;
 	usb_init_skel();
 	reset_hc();
@@ -792,7 +792,7 @@ int uhci_submit_rh_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
 	unsigned short wIndex;
 	unsigned short wLength;
 
-	if ((pipe & PIPE_INTERRUPT) == PIPE_INTERRUPT) {
+	if (usb_pipeint(pipe)) {
 		printf("Root-Hub submit IRQ: NOT implemented\n");
 #if 0
 		uhci->rh.urb = urb;
diff --git a/board/mpl/mip405/mip405.c b/board/mpl/mip405/mip405.c
index cf0afd1ad..5eb90e590 100644
--- a/board/mpl/mip405/mip405.c
+++ b/board/mpl/mip405/mip405.c
@@ -250,7 +250,7 @@ int init_sdram (void)
 	unsigned char	bc;
 	unsigned long	sdram_tim, sdram_bank;
 
-	/*i2c_init (CFG_I2C_SPEED, CFG_I2C_SLAVE);*/
+	/*i2c_init (CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);*/
 	(void) get_clocks ();
 	gd->baudrate = 9600;
 	serial_init ();
@@ -320,7 +320,7 @@ int init_sdram (void)
 	serial_puts ("\n");
 #endif
 	i = 0;
-	baseaddr = CFG_SDRAM_BASE;
+	baseaddr = CONFIG_SYS_SDRAM_BASE;
 	while (sdram_table[i].sz != 0xff) {
 		if (sdram_table[i].boardtype == bc)
 			break;
@@ -679,7 +679,7 @@ int misc_init_r (void)
 {
 	/* adjust flash start and size as well as the offset */
 	gd->bd->bi_flashstart=0-flash_info[0].size;
-	gd->bd->bi_flashsize=flash_info[0].size-CFG_MONITOR_LEN;
+	gd->bd->bi_flashsize=flash_info[0].size-CONFIG_SYS_MONITOR_LEN;
 	gd->bd->bi_flashoffset=0;
 
 	/* check, if RTC is running */
diff --git a/board/mpl/mip405/u-boot.lds b/board/mpl/mip405/u-boot.lds
index 7932b9fc0..8714c2bdf 100644
--- a/board/mpl/mip405/u-boot.lds
+++ b/board/mpl/mip405/u-boot.lds
@@ -72,14 +72,14 @@ SECTIONS
     cpu/ppc4xx/4xx_uart.o	(.text)
     cpu/ppc4xx/cpu_init.o	(.text)
     cpu/ppc4xx/speed.o	(.text)
-    cpu/ppc4xx/4xx_enet.o	(.text)
+    drivers/net/4xx_enet.o	(.text)
     common/dlmalloc.o	(.text)
     lib_generic/crc32.o		(.text)
     lib_ppc/extable.o	(.text)
     lib_generic/zlib.o		(.text)
 
 /*    . = env_offset;*/
-/*    common/environment.o(.text)*/
+/*    common/env_embedded.o(.text)*/
 
     *(.text)
     *(.fixup)
@@ -150,6 +150,7 @@ SECTIONS
    *(.dynbss)
    *(.bss)
    *(COMMON)
+   . = ALIGN(4);
   }
   _end = . ;
   PROVIDE (end = .);
diff --git a/board/mpl/pati/cmd_pati.c b/board/mpl/pati/cmd_pati.c
index 91683a38d..9d9531b54 100644
--- a/board/mpl/pati/cmd_pati.c
+++ b/board/mpl/pati/cmd_pati.c
@@ -37,7 +37,7 @@ extern void user_led0(int led_on);
 extern void user_led1(int led_on);
 
 /* ------------------------------------------------------------------------- */
-#if defined(CFG_PCI_CON_DEVICE)
+#if defined(CONFIG_SYS_PCI_CON_DEVICE)
 extern void pci_con_disc(void);
 extern void pci_con_connect(void);
 #endif
@@ -378,7 +378,7 @@ int do_pati(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 			user_led1(led_on);
 		return 0;
 	}
-#if defined(CFG_PCI_CON_DEVICE)
+#if defined(CONFIG_SYS_PCI_CON_DEVICE)
 	if (strcmp(argv[1], "con") == 0) {
 		pci_con_connect();
 		return 0;
diff --git a/board/mpl/pati/pati.c b/board/mpl/pati/pati.c
index 475741d2a..85c5af956 100644
--- a/board/mpl/pati/pati.c
+++ b/board/mpl/pati/pati.c
@@ -224,7 +224,7 @@ phys_size_t initdram(int board_type)
 	/* rest standard operation programmed write burst length */
 	/* we have a x32 bit bus to the SDRAM, so shift the addr with 2 */
 	lmr<<=2;
-	in32(CFG_SDRAM_BASE + lmr);
+	in32(CONFIG_SYS_SDRAM_BASE + lmr);
 	/* ok, we're done, return SDRAM size */
 	return ((0x400000 << sdram_table[i].sz));		/* log2 value of 4MByte  */
 }
@@ -287,7 +287,7 @@ void show_pld_regs(void)
  ****************************************************************/
  void init_ios(void)
  {
-	volatile immap_t * immr = (immap_t *) CFG_IMMR;
+	volatile immap_t * immr = (immap_t *) CONFIG_SYS_IMMR;
 	volatile sysconf5xx_t *sysconf = &immr->im_siu_conf;
 	unsigned long reg;
 	reg=sysconf->sc_sgpiocr; /* Data direction register */
@@ -304,7 +304,7 @@ void show_pld_regs(void)
 
 void user_led0(int led_on)
 {
-	volatile immap_t * immr = (immap_t *) CFG_IMMR;
+	volatile immap_t * immr = (immap_t *) CONFIG_SYS_IMMR;
 	volatile sysconf5xx_t *sysconf = &immr->im_siu_conf;
 	unsigned long reg;
 	reg=sysconf->sc_sgpiodt2; /* Data register */
@@ -317,7 +317,7 @@ void user_led0(int led_on)
 
 void user_led1(int led_on)
 {
-	volatile immap_t * immr = (immap_t *) CFG_IMMR;
+	volatile immap_t * immr = (immap_t *) CONFIG_SYS_IMMR;
 	volatile sysconf5xx_t *sysconf = &immr->im_siu_conf;
 	unsigned long reg;
 	reg=sysconf->sc_sgpiodt2; /* Data register */
@@ -370,7 +370,7 @@ int checkboard (void)
 }
 
 
-#ifdef CFG_PCI_CON_DEVICE
+#ifdef CONFIG_SYS_PCI_CON_DEVICE
 /************************************************************************
  * PCI Communication
  *
@@ -610,9 +610,9 @@ void pci_con_disc(void)
 	irq_free_handler(0x02);
 	pci_con_connect();
 }
-#endif /* #ifdef CFG_PCI_CON_DEVICE */
+#endif /* #ifdef CONFIG_SYS_PCI_CON_DEVICE */
 
 /*
  * Absolute environment address for linker file.
  */
-GEN_ABS(env_start, CFG_ENV_OFFSET + CFG_FLASH_BASE);
+GEN_ABS(env_start, CONFIG_ENV_OFFSET + CONFIG_SYS_FLASH_BASE);
diff --git a/board/mpl/pip405/pip405.c b/board/mpl/pip405/pip405.c
index 6cba892e7..8724e27af 100644
--- a/board/mpl/pip405/pip405.c
+++ b/board/mpl/pip405/pip405.c
@@ -208,7 +208,7 @@ int board_early_init_f (void)
 #endif
 
 	/* Read Serial Presence Detect Information */
-	i2c_init (CFG_I2C_SPEED, CFG_I2C_SLAVE);
+	i2c_init (CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
 	dataout[0] = 0;
 	for (i = 0; i < 128; i++)
 		datain[i] = 127;
@@ -252,7 +252,7 @@ int board_early_init_f (void)
 		(datain[2] != 0x04) ||	/* if not SDRAM */
 		(!((datain[6] == 0x40) || (datain[6] == 0x48))) ||	/* or not (64 Bit or 72 Bit)  */
 		(datain[7] != 0x00) || (datain[8] != 0x01) ||	/* or not LVTTL signal levels */
-		(datain[126] == 0x66))	/* or a 66Mhz modules */
+		(datain[126] == 0x66))	/* or a 66MHz modules */
 		SDRAM_err ("unsupported SDRAM");
 #ifdef SDRAM_DEBUG
 	serial_puts ("SDRAM sanity ok\n");
@@ -386,7 +386,7 @@ int board_early_init_f (void)
 	/* write SDRAM timing register */
 	mtdcr (memcfga, mem_sdtr1);
 	mtdcr (memcfgd, tmp);
-	baseaddr = CFG_SDRAM_BASE;
+	baseaddr = CONFIG_SYS_SDRAM_BASE;
 	bank_size = (((unsigned long) density) << 22) / 2;
 	/* insert AM value */
 	tmp = ((unsigned long) t->mode - 1) << 13;
@@ -663,7 +663,7 @@ int misc_init_r (void)
 {
 	/* adjust flash start and size as well as the offset */
 	gd->bd->bi_flashstart=0-flash_info[0].size;
-	gd->bd->bi_flashsize=flash_info[0].size-CFG_MONITOR_LEN;
+	gd->bd->bi_flashsize=flash_info[0].size-CONFIG_SYS_MONITOR_LEN;
 	gd->bd->bi_flashoffset=0;
 
 	/* if PIP405 has booted from PCI, reset CCR0[24] as described in errata PCI_18 */
diff --git a/board/mpl/pip405/pip405.h b/board/mpl/pip405/pip405.h
index 5815786eb..704ab2c71 100644
--- a/board/mpl/pip405/pip405.h
+++ b/board/mpl/pip405/pip405.h
@@ -35,7 +35,7 @@ void user_led0(unsigned char on);
 void user_led1(unsigned char on);
 
 
-#define PLD_BASE_ADDRESS		CFG_ISA_IO_BASE_ADDRESS + 0x800
+#define PLD_BASE_ADDRESS		CONFIG_SYS_ISA_IO_BASE_ADDRESS + 0x800
 #define PLD_PART_REG			PLD_BASE_ADDRESS + 0
 #define PLD_VERS_REG			PLD_BASE_ADDRESS + 1
 #define PLD_BOARD_CFG_REG		PLD_BASE_ADDRESS + 2
diff --git a/board/mpl/pip405/u-boot.lds b/board/mpl/pip405/u-boot.lds
index fb710649a..afe203b22 100644
--- a/board/mpl/pip405/u-boot.lds
+++ b/board/mpl/pip405/u-boot.lds
@@ -74,7 +74,7 @@ SECTIONS
     lib_generic/zlib.o		(.text)
 
 /*    . = env_offset;*/
-/*    common/environment.o(.text)*/
+/*    common/env_embedded.o(.text)*/
 
     *(.text)
     *(.fixup)
@@ -145,6 +145,7 @@ SECTIONS
    *(.dynbss)
    *(.bss)
    *(COMMON)
+   . = ALIGN(4);
   }
   _end = . ;
   PROVIDE (end = .);
diff --git a/board/mpl/pip405/u-boot.lds.debug b/board/mpl/pip405/u-boot.lds.debug
index 0552994f4..338392a07 100644
--- a/board/mpl/pip405/u-boot.lds.debug
+++ b/board/mpl/pip405/u-boot.lds.debug
@@ -61,7 +61,7 @@ SECTIONS
     lib_generic/crc32.o		(.text)
     lib_ppc/extable.o	(.text)
 
-    common/environment.o(.text)
+    common/env_embedded.o(.text)
 
     *(.text)
     *(.fixup)
diff --git a/board/mpl/vcma9/flash.c b/board/mpl/vcma9/flash.c
index d15a19115..7abf9cfba 100644
--- a/board/mpl/vcma9/flash.c
+++ b/board/mpl/vcma9/flash.c
@@ -30,7 +30,7 @@ ulong myflush (void);
 #define FLASH_BANK_SIZE	PHYS_FLASH_SIZE
 #define MAIN_SECT_SIZE  0x10000	/* 64 KB */
 
-flash_info_t flash_info[CFG_MAX_FLASH_BANKS];
+flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];
 
 
 #define CMD_READ_ARRAY		0x000000F0
@@ -41,8 +41,8 @@ flash_info_t flash_info[CFG_MAX_FLASH_BANKS];
 #define CMD_PROGRAM		0x000000A0
 #define CMD_UNLOCK_BYPASS	0x00000020
 
-#define MEM_FLASH_ADDR1		(*(volatile u16 *)(CFG_FLASH_BASE + (0x00000555 << 1)))
-#define MEM_FLASH_ADDR2		(*(volatile u16 *)(CFG_FLASH_BASE + (0x000002AA << 1)))
+#define MEM_FLASH_ADDR1		(*(volatile u16 *)(CONFIG_SYS_FLASH_BASE + (0x00000555 << 1)))
+#define MEM_FLASH_ADDR2		(*(volatile u16 *)(CONFIG_SYS_FLASH_BASE + (0x000002AA << 1)))
 
 #define BIT_ERASE_DONE		0x00000080
 #define BIT_RDY_MASK		0x00000080
@@ -61,7 +61,7 @@ ulong flash_init (void)
 	int i, j;
 	ulong size = 0;
 
-	for (i = 0; i < CFG_MAX_FLASH_BANKS; i++) {
+	for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) {
 		ulong flashbase = 0;
 
 		flash_info[i].flash_id =
@@ -75,8 +75,8 @@ ulong flash_init (void)
 #error "Unknown flash configured"
 #endif
 			flash_info[i].size = FLASH_BANK_SIZE;
-		flash_info[i].sector_count = CFG_MAX_FLASH_SECT;
-		memset (flash_info[i].protect, 0, CFG_MAX_FLASH_SECT);
+		flash_info[i].sector_count = CONFIG_SYS_MAX_FLASH_SECT;
+		memset (flash_info[i].protect, 0, CONFIG_SYS_MAX_FLASH_SECT);
 		if (i == 0)
 			flashbase = PHYS_FLASH_1;
 		else
@@ -111,13 +111,13 @@ ulong flash_init (void)
 	}
 
 	flash_protect (FLAG_PROTECT_SET,
-		       CFG_FLASH_BASE,
-		       CFG_FLASH_BASE + monitor_flash_len - 1,
+		       CONFIG_SYS_FLASH_BASE,
+		       CONFIG_SYS_FLASH_BASE + monitor_flash_len - 1,
 		       &flash_info[0]);
 
 	flash_protect (FLAG_PROTECT_SET,
-		       CFG_ENV_ADDR,
-		       CFG_ENV_ADDR + CFG_ENV_SIZE - 1, &flash_info[0]);
+		       CONFIG_ENV_ADDR,
+		       CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1, &flash_info[0]);
 
 	return size;
 }
@@ -236,7 +236,7 @@ int flash_erase (flash_info_t * info, int s_first, int s_last)
 
 				/* check timeout */
 				if (get_timer_masked () >
-				    CFG_FLASH_ERASE_TOUT) {
+				    CONFIG_SYS_FLASH_ERASE_TOUT) {
 					MEM_FLASH_ADDR1 = CMD_READ_ARRAY;
 					chip = TMO;
 					break;
@@ -331,7 +331,7 @@ static int write_hword (flash_info_t * info, ulong dest, ushort data)
 		result = *addr;
 
 		/* check timeout */
-		if (get_timer_masked () > CFG_FLASH_ERASE_TOUT) {
+		if (get_timer_masked () > CONFIG_SYS_FLASH_ERASE_TOUT) {
 			chip = ERR | TMO;
 			break;
 		}
diff --git a/board/mpl/vcma9/u-boot.lds b/board/mpl/vcma9/u-boot.lds
index 14cd22800..987b07d94 100644
--- a/board/mpl/vcma9/u-boot.lds
+++ b/board/mpl/vcma9/u-boot.lds
@@ -52,6 +52,6 @@ SECTIONS
 
 	. = ALIGN(4);
 	__bss_start = .;
-	.bss (NOLOAD) : { *(.bss) }
+	.bss (NOLOAD) : { *(.bss) . = ALIGN(4); }
 	_end = .;
 }
diff --git a/board/mpr2/mpr2.c b/board/mpr2/mpr2.c
index 98557b400..0ec0c198b 100644
--- a/board/mpr2/mpr2.c
+++ b/board/mpr2/mpr2.c
@@ -154,8 +154,8 @@ int dram_init(void)
 {
 	DECLARE_GLOBAL_DATA_PTR;
 
-	gd->bd->bi_memstart = CFG_SDRAM_BASE;
-	gd->bd->bi_memsize = CFG_SDRAM_SIZE;
-	printf("SDRAM: %dMB\n", CFG_SDRAM_SIZE / (1024 * 1024));
+	gd->bd->bi_memstart = CONFIG_SYS_SDRAM_BASE;
+	gd->bd->bi_memsize = CONFIG_SYS_SDRAM_SIZE;
+	printf("SDRAM: %dMB\n", CONFIG_SYS_SDRAM_SIZE / (1024 * 1024));
 	return 0;
 }
diff --git a/board/mpr2/u-boot.lds b/board/mpr2/u-boot.lds
index eda6b442a..b1f0e1d6d 100644
--- a/board/mpr2/u-boot.lds
+++ b/board/mpr2/u-boot.lds
@@ -53,9 +53,9 @@ SECTIONS
 	{
 		cpu/sh3/start.o		(.text)
 		. = ALIGN(8192);
-		common/environment.o	(.ppcenv)
+		common/env_embedded.o	(.ppcenv)
 		. = ALIGN(8192);
-		common/environment.o	(.ppcenvr)
+		common/env_embedded.o	(.ppcenvr)
 		. = ALIGN(8192);
 		*(.text)
 		. = ALIGN(4);
diff --git a/board/ms7720se/ms7720se.c b/board/ms7720se/ms7720se.c
index af62cdfd2..f83c1208a 100644
--- a/board/ms7720se/ms7720se.c
+++ b/board/ms7720se/ms7720se.c
@@ -47,9 +47,9 @@ int dram_init(void)
 {
 	DECLARE_GLOBAL_DATA_PTR;
 
-	gd->bd->bi_memstart = CFG_SDRAM_BASE;
-	gd->bd->bi_memsize = CFG_SDRAM_SIZE;
-	printf("DRAM:  %dMB\n", CFG_SDRAM_SIZE / (1024 * 1024));
+	gd->bd->bi_memstart = CONFIG_SYS_SDRAM_BASE;
+	gd->bd->bi_memsize = CONFIG_SYS_SDRAM_SIZE;
+	printf("DRAM:  %dMB\n", CONFIG_SYS_SDRAM_SIZE / (1024 * 1024));
 	return 0;
 }
 
diff --git a/board/ms7720se/u-boot.lds b/board/ms7720se/u-boot.lds
index ba71a9195..2156f6a57 100644
--- a/board/ms7720se/u-boot.lds
+++ b/board/ms7720se/u-boot.lds
@@ -52,9 +52,9 @@ SECTIONS
 	{
 		cpu/sh3/start.o		(.text)
 		. = ALIGN(8192);
-		common/environment.o	(.ppcenv)
+		common/env_embedded.o	(.ppcenv)
 		. = ALIGN(8192);
-		common/environment.o	(.ppcenvr)
+		common/env_embedded.o	(.ppcenvr)
 		. = ALIGN(8192);
 		*(.text)
 		. = ALIGN(4);
diff --git a/board/ms7722se/lowlevel_init.S b/board/ms7722se/lowlevel_init.S
index 332f65a4c..8b46595f3 100644
--- a/board/ms7722se/lowlevel_init.S
+++ b/board/ms7722se/lowlevel_init.S
@@ -43,48 +43,61 @@
 
 lowlevel_init:
 
-	mov.l	CCR_A, r1	! Address of Cache Control Register
-	mov.l	CCR_D, r0	! Instruction Cache Invalidate
+	/* Address of Cache Control Register */
+	mov.l	CCR_A, r1
+	/*Instruction Cache Invalidate */
+	mov.l	CCR_D, r0
 	mov.l	r0, @r1
 
-	mov.l	MMUCR_A, r1	! Address of MMU Control Register
-	mov.l	MMUCR_D, r0	! TI == TLB Invalidate bit
+	/* Address of MMU Control Register */
+	mov.l	MMUCR_A, r1
+	/* TI == TLB Invalidate bit */
+	mov.l	MMUCR_D, r0
 	mov.l	r0, @r1
 
-	mov.l	MSTPCR0_A, r1	! Address of Power Control Register 0
-	mov.l	MSTPCR0_D, r0	!
+	/* Address of Power Control Register 0 */
+	mov.l	MSTPCR0_A, r1
+	mov.l	MSTPCR0_D, r0
 	mov.l	r0, @r1
 
-	mov.l	MSTPCR2_A, r1	! Address of Power Control Register 2
-	mov.l	MSTPCR2_D, r0	!
+	/* Address of Power Control Register 2 */
+	mov.l	MSTPCR2_A, r1
+	mov.l	MSTPCR2_D, r0
 	mov.l	r0, @r1
 
-	mov.l	SBSCR_A, r1	!
-	mov.w	SBSCR_D, r0	!
+	mov.l	SBSCR_A, r1
+	mov.w	SBSCR_D, r0
 	mov.w	r0, @r1
 
-	mov.l	PSCR_A, r1	!
-	mov.w	PSCR_D, r0	!
+	mov.l	PSCR_A, r1
+	mov.w	PSCR_D, r0
 	mov.w	r0, @r1
 
-!	mov.l	RWTCSR_A, r1	! 0xA4520004 (Watchdog Control / Status Register)
-!	mov.w	RWTCSR_D_1, r0	! 0xA507 -> timer_STOP/WDT_CLK=max
+	/* 0xA4520004 (Watchdog Control / Status Register) */
+!	mov.l	RWTCSR_A, r1
+	/* 0xA507 -> timer_STOP/WDT_CLK=max */
+!	mov.w	RWTCSR_D_1, r0
 !	mov.w	r0, @r1
 
-	mov.l	RWTCNT_A, r1	! 0xA4520000 (Watchdog Count Register)
-	mov.w	RWTCNT_D, r0	! 0x5A00 -> Clear
+	/* 0xA4520000 (Watchdog Count Register) */
+	mov.l	RWTCNT_A, r1
+	/*0x5A00 -> Clear */
+	mov.w	RWTCNT_D, r0
 	mov.w	r0, @r1
 
-	mov.l	RWTCSR_A, r1	! 0xA4520004 (Watchdog Control / Status Register)
-	mov.w	RWTCSR_D_2, r0	! 0xA504 -> timer_STOP/CLK=500ms
+	/* 0xA4520004 (Watchdog Control / Status Register) */
+	mov.l	RWTCSR_A, r1
+	/* 0xA504 -> timer_STOP/CLK=500ms */
+	mov.w	RWTCSR_D_2, r0
 	mov.w	r0, @r1
 
-	mov.l	FRQCR_A, r1		! 0xA4150000 Frequency control register
+	/* 0xA4150000 Frequency control register */
+	mov.l	FRQCR_A, r1
 	mov.l	FRQCR_D, r0	!
 	mov.l	r0, @r1
 
-	mov.l	CCR_A, r1		! Address of Cache Control Register
-	mov.l	CCR_D_2, r0	! ??
+	mov.l	CCR_A, r1
+	mov.l	CCR_D_2, r0
 	mov.l	r0, @r1
 
 bsc_init:
@@ -290,5 +303,6 @@ PSCR_D:		.word	0x0000
 RWTCSR_D_1:	.word	0xA507
 RWTCSR_D_2:	.word	0xA507
 RWTCNT_D:	.word	0x5A00
+	.align	2
 
 SR_MASK_D:	.long	0xEFFFFF0F
diff --git a/board/ms7722se/ms7722se.c b/board/ms7722se/ms7722se.c
index cf0224229..32234d3e0 100644
--- a/board/ms7722se/ms7722se.c
+++ b/board/ms7722se/ms7722se.c
@@ -47,9 +47,9 @@ int dram_init(void)
 {
 	DECLARE_GLOBAL_DATA_PTR;
 
-	gd->bd->bi_memstart = CFG_SDRAM_BASE;
-	gd->bd->bi_memsize = CFG_SDRAM_SIZE;
-	printf("DRAM:  %dMB\n", CFG_SDRAM_SIZE / (1024 * 1024));
+	gd->bd->bi_memstart = CONFIG_SYS_SDRAM_BASE;
+	gd->bd->bi_memsize = CONFIG_SYS_SDRAM_SIZE;
+	printf("DRAM:  %dMB\n", CONFIG_SYS_SDRAM_SIZE / (1024 * 1024));
 	return 0;
 }
 
diff --git a/board/ms7722se/u-boot.lds b/board/ms7722se/u-boot.lds
index 88b4f5c45..7dffe008a 100644
--- a/board/ms7722se/u-boot.lds
+++ b/board/ms7722se/u-boot.lds
@@ -49,9 +49,9 @@ SECTIONS
 	{
 		cpu/sh4/start.o		(.text)
 		. = ALIGN(8192);
-		common/environment.o	(.ppcenv)
+		common/env_embedded.o	(.ppcenv)
 		. = ALIGN(8192);
-		common/environment.o	(.ppcenvr)
+		common/env_embedded.o	(.ppcenvr)
 		. = ALIGN(8192);
 		*(.text)
 		. = ALIGN(4);
diff --git a/board/ms7750se/ms7750se.c b/board/ms7750se/ms7750se.c
index d2d824c5a..02ff0a3df 100644
--- a/board/ms7750se/ms7750se.c
+++ b/board/ms7750se/ms7750se.c
@@ -39,9 +39,9 @@ int dram_init (void)
 {
 	DECLARE_GLOBAL_DATA_PTR;
 
-	gd->bd->bi_memstart = CFG_SDRAM_BASE;
-	gd->bd->bi_memsize = CFG_SDRAM_SIZE;
-	printf("DRAM:  %dMB\n", CFG_SDRAM_SIZE / (1024 * 1024));
+	gd->bd->bi_memstart = CONFIG_SYS_SDRAM_BASE;
+	gd->bd->bi_memsize = CONFIG_SYS_SDRAM_SIZE;
+	printf("DRAM:  %dMB\n", CONFIG_SYS_SDRAM_SIZE / (1024 * 1024));
 	return 0;
 }
 
diff --git a/board/ms7750se/u-boot.lds b/board/ms7750se/u-boot.lds
index 88b4f5c45..7dffe008a 100644
--- a/board/ms7750se/u-boot.lds
+++ b/board/ms7750se/u-boot.lds
@@ -49,9 +49,9 @@ SECTIONS
 	{
 		cpu/sh4/start.o		(.text)
 		. = ALIGN(8192);
-		common/environment.o	(.ppcenv)
+		common/env_embedded.o	(.ppcenv)
 		. = ALIGN(8192);
-		common/environment.o	(.ppcenvr)
+		common/env_embedded.o	(.ppcenvr)
 		. = ALIGN(8192);
 		*(.text)
 		. = ALIGN(4);
diff --git a/board/muas3001/muas3001.c b/board/muas3001/muas3001.c
index 49aed037c..6b1e59f97 100644
--- a/board/muas3001/muas3001.c
+++ b/board/muas3001/muas3001.c
@@ -163,8 +163,13 @@ const iop_conf_t iop_conf_tab[4][32] = {
 	/* PD18 */ { 0,          0,   0,   0,   0,   0 }, /* PD18            */
 	/* PD17 */ { 0,          0,   0,   0,   0,   0 }, /* PD17            */
 	/* PD16 */ { 0,          0,   0,   0,   0,   0 }, /* PD16            */
-	/* PD15 */ { 1,          1,   1,   0,   0,   0 }, /* I2C SDA         */
-	/* PD14 */ { 1,          1,   1,   0,   0,   0 }, /* I2C SCL         */
+#if defined(CONFIG_HARD_I2C)
+	/* PD15 */ { 1,          1,   1,   0,   1,   0 }, /* I2C SDA         */
+	/* PD14 */ { 1,          1,   1,   0,   1,   0 }, /* I2C SCL         */
+#else
+	/* PD15 */ { 1,          0,   0,   0,   1,   1 }, /* PD15            */
+	/* PD14 */ { 1,          0,   0,   1,   1,   1 }, /* PD14            */
+#endif
 	/* PD13 */ { 0,          0,   0,   0,   0,   0 }, /* PD13            */
 	/* PD12 */ { 0,          0,   0,   0,   0,   0 }, /* PD12            */
 	/* PD11 */ { 0,          0,   0,   0,   0,   0 }, /* PD11            */
@@ -227,7 +232,7 @@ static long int try_init (volatile memctl8260_t * memctl, ulong sdmr,
 	 *  accessing the SDRAM with a single-byte transaction."
 	 *
 	 * The appropriate BRx/ORx registers have already been set when we
-	 * get here. The SDRAM can be accessed at the address CFG_SDRAM_BASE.
+	 * get here. The SDRAM can be accessed at the address CONFIG_SYS_SDRAM_BASE.
 	 */
 
 	*sdmr_ptr = sdmr | PSDMR_OP_PREA;
@@ -238,7 +243,7 @@ static long int try_init (volatile memctl8260_t * memctl, ulong sdmr,
 		*base = c;
 
 	*sdmr_ptr = sdmr | PSDMR_OP_MRW;
-	*(base + CFG_MRS_OFFS) = c;	/* setting MR on address lines */
+	*(base + CONFIG_SYS_MRS_OFFS) = c;	/* setting MR on address lines */
 
 	*sdmr_ptr = sdmr | PSDMR_OP_NORM | PSDMR_RFEN;
 	*base = c;
@@ -251,20 +256,30 @@ static long int try_init (volatile memctl8260_t * memctl, ulong sdmr,
 
 phys_size_t initdram (int board_type)
 {
-	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
 	volatile memctl8260_t *memctl = &immap->im_memctl;
-
 	long psize;
+#ifndef CONFIG_SYS_RAMBOOT
+	long sizelittle, sizebig;
+#endif
 
-	memctl->memc_psrt = CFG_PSRT;
-	memctl->memc_mptpr = CFG_MPTPR;
+	memctl->memc_psrt = CONFIG_SYS_PSRT;
+	memctl->memc_mptpr = CONFIG_SYS_MPTPR;
 
-#ifndef CFG_RAMBOOT
+#ifndef CONFIG_SYS_RAMBOOT
 	/* 60x SDRAM setup:
 	 */
-	psize = try_init (memctl, CFG_PSDMR, CFG_OR1,
-						  (uchar *) CFG_SDRAM_BASE);
-#endif /* CFG_RAMBOOT */
+	sizelittle = try_init (memctl, CONFIG_SYS_PSDMR_LITTLE, CONFIG_SYS_OR1_LITTLE,
+						  (uchar *) CONFIG_SYS_SDRAM_BASE);
+	sizebig = try_init (memctl, CONFIG_SYS_PSDMR_BIG, CONFIG_SYS_OR1_BIG,
+						  (uchar *) CONFIG_SYS_SDRAM_BASE);
+	if (sizelittle < sizebig) {
+		psize = sizebig;
+	} else {
+		psize = try_init (memctl, CONFIG_SYS_PSDMR_LITTLE, CONFIG_SYS_OR1_LITTLE,
+						  (uchar *) CONFIG_SYS_SDRAM_BASE);
+	}
+#endif /* CONFIG_SYS_RAMBOOT */
 
 	icache_enable ();
 
@@ -314,8 +329,8 @@ void ft_blob_update (void *blob, bd_t *bd)
 			"err:%s\n", fdt_strerror(nodeoffset));
 	}
 	/* update Flash addr, size */
-	flash_data[2] = cpu_to_be32 (CFG_FLASH_BASE);
-	flash_data[3] = cpu_to_be32 (CFG_FLASH_SIZE);
+	flash_data[2] = cpu_to_be32 (CONFIG_SYS_FLASH_BASE);
+	flash_data[3] = cpu_to_be32 (CONFIG_SYS_FLASH_SIZE);
 	nodeoffset = fdt_path_offset (blob, "/localbus");
 	if (nodeoffset >= 0) {
 		ret = fdt_setprop (blob, nodeoffset, "ranges", flash_data,
diff --git a/board/mucmc52/mucmc52.c b/board/mucmc52/mucmc52.c
index ae3ca2422..7181bd8a4 100644
--- a/board/mucmc52/mucmc52.c
+++ b/board/mucmc52/mucmc52.c
@@ -37,7 +37,7 @@
 #include <asm/processor.h>
 #include <asm/io.h>
 
-#ifndef CFG_RAMBOOT
+#ifndef CONFIG_SYS_RAMBOOT
 static void sdram_start (int hi_addr)
 {
 	long hi_addr_bit = hi_addr ? 0x01000000 : 0;
@@ -86,7 +86,7 @@ static void sdram_start (int hi_addr)
 
 /*
  * ATTENTION: Although partially referenced initdram does NOT make real use
- *	      use of CFG_SDRAM_BASE. The code does not work if CFG_SDRAM_BASE
+ *	      use of CONFIG_SYS_SDRAM_BASE. The code does not work if CONFIG_SYS_SDRAM_BASE
  *	      is something else than 0x00000000.
  */
 
@@ -96,7 +96,7 @@ phys_size_t initdram (int board_type)
 	ulong dramsize2 = 0;
 	uint svr, pvr;
 
-#ifndef CFG_RAMBOOT
+#ifndef CONFIG_SYS_RAMBOOT
 	ulong test1, test2;
 
 	/* setup SDRAM chip selects */
@@ -117,9 +117,9 @@ phys_size_t initdram (int board_type)
 
 	/* find RAM size using SDRAM CS0 only */
 	sdram_start (0);
-	test1 = get_ram_size ((long *)CFG_SDRAM_BASE, 0x20000000);
+	test1 = get_ram_size ((long *)CONFIG_SYS_SDRAM_BASE, 0x20000000);
 	sdram_start(1);
-	test2 = get_ram_size ((long *)CFG_SDRAM_BASE, 0x20000000);
+	test2 = get_ram_size ((long *)CONFIG_SYS_SDRAM_BASE, 0x20000000);
 	if (test1 > test2) {
 		sdram_start (0);
 		dramsize = test1;
@@ -146,10 +146,10 @@ phys_size_t initdram (int board_type)
 	/* find RAM size using SDRAM CS1 only */
 	if (!dramsize)
 		sdram_start (0);
-	test2 = test1 = get_ram_size ((long *)(CFG_SDRAM_BASE + dramsize), 0x20000000);
+	test2 = test1 = get_ram_size ((long *)(CONFIG_SYS_SDRAM_BASE + dramsize), 0x20000000);
 	if (!dramsize) {
 		sdram_start (1);
-		test2 = get_ram_size ((long *)(CFG_SDRAM_BASE + dramsize), 0x20000000);
+		test2 = get_ram_size ((long *)(CONFIG_SYS_SDRAM_BASE + dramsize), 0x20000000);
 	}
 	if (test1 > test2) {
 		sdram_start (0);
@@ -171,7 +171,7 @@ phys_size_t initdram (int board_type)
 		out_be32 ((unsigned __iomem *)MPC5XXX_SDRAM_CS1CFG, dramsize); /* disabled */
 	}
 
-#else /* CFG_RAMBOOT */
+#else /* CONFIG_SYS_RAMBOOT */
 
 	/* retrieve size of memory connected to SDRAM CS0 */
 	dramsize = in_be32 ((unsigned __iomem *)MPC5XXX_SDRAM_CS0CFG) & 0xFF;
@@ -189,25 +189,25 @@ phys_size_t initdram (int board_type)
 		dramsize2 = 0;
 	}
 
-#endif /* CFG_RAMBOOT */
+#endif /* CONFIG_SYS_RAMBOOT */
 
 	 /*
-         * On MPC5200B we need to set the special configuration delay in the
-         * DDR controller. Please refer to Freescale's AN3221 "MPC5200B SDRAM
-         * Initialization and Configuration", 3.3.1 SDelay--MBAR + 0x0190:
-         *
-         * "The SDelay should be written to a value of 0x00000004. It is
-         * required to account for changes caused by normal wafer processing
-         * parameters."
-         */
-        svr = get_svr();
-        pvr = get_pvr();
-        if ((SVR_MJREV(svr) >= 2) &&
-            (PVR_MAJ(pvr) == 1) && (PVR_MIN(pvr) == 4)) {
-
-                out_be32 ((unsigned __iomem *)MPC5XXX_SDRAM_SDELAY, 0x04);
-                __asm__ volatile ("sync");
-        }
+	 * On MPC5200B we need to set the special configuration delay in the
+	 * DDR controller. Please refer to Freescale's AN3221 "MPC5200B SDRAM
+	 * Initialization and Configuration", 3.3.1 SDelay--MBAR + 0x0190:
+	 *
+	 * "The SDelay should be written to a value of 0x00000004. It is
+	 * required to account for changes caused by normal wafer processing
+	 * parameters."
+	 */
+	svr = get_svr();
+	pvr = get_pvr();
+	if ((SVR_MJREV(svr) >= 2) &&
+	    (PVR_MAJ(pvr) == 1) && (PVR_MIN(pvr) == 4)) {
+
+		out_be32 ((unsigned __iomem *)MPC5XXX_SDRAM_SDELAY, 0x04);
+		__asm__ volatile ("sync");
+	}
 
 	return dramsize + dramsize2;
 }
@@ -239,8 +239,8 @@ struct kbd_data_t {
 
 struct kbd_data_t* get_keys (struct kbd_data_t *kbd_data)
 {
-	kbd_data->s1 = in_8 ((volatile uchar*)CFG_STATUS1_BASE);
-	kbd_data->s2 = in_8 ((volatile uchar*)CFG_STATUS2_BASE);
+	kbd_data->s1 = in_8 ((volatile uchar*)CONFIG_SYS_STATUS1_BASE);
+	kbd_data->s2 = in_8 ((volatile uchar*)CONFIG_SYS_STATUS2_BASE);
 
 	return kbd_data;
 }
@@ -339,14 +339,14 @@ int misc_init_r (void)
 	free (str);
 #endif /* CONFIG_PREBOOT */
 
-        out_8 ((volatile uchar *)(CFG_DISPLAY_BASE + 0x38), ' ');
-        out_8 ((volatile uchar *)(CFG_DISPLAY_BASE + 0x39), ' ');
-        out_8 ((volatile uchar *)(CFG_DISPLAY_BASE + 0x3A), ' ');
-        out_8 ((volatile uchar *)(CFG_DISPLAY_BASE + 0x3B), ' ');
-        out_8 ((volatile uchar *)(CFG_DISPLAY_BASE + 0x3C), ' ');
-        out_8 ((volatile uchar *)(CFG_DISPLAY_BASE + 0x3D), ' ');
-        out_8 ((volatile uchar *)(CFG_DISPLAY_BASE + 0x3E), ' ');
-        out_8 ((volatile uchar *)(CFG_DISPLAY_BASE + 0x3F), ' ');
+	out_8 ((volatile uchar *)(CONFIG_SYS_DISPLAY_BASE + 0x38), ' ');
+	out_8 ((volatile uchar *)(CONFIG_SYS_DISPLAY_BASE + 0x39), ' ');
+	out_8 ((volatile uchar *)(CONFIG_SYS_DISPLAY_BASE + 0x3A), ' ');
+	out_8 ((volatile uchar *)(CONFIG_SYS_DISPLAY_BASE + 0x3B), ' ');
+	out_8 ((volatile uchar *)(CONFIG_SYS_DISPLAY_BASE + 0x3C), ' ');
+	out_8 ((volatile uchar *)(CONFIG_SYS_DISPLAY_BASE + 0x3D), ' ');
+	out_8 ((volatile uchar *)(CONFIG_SYS_DISPLAY_BASE + 0x3E), ' ');
+	out_8 ((volatile uchar *)(CONFIG_SYS_DISPLAY_BASE + 0x3F), ' ');
 
 	return 0;
 }
@@ -354,27 +354,27 @@ int misc_init_r (void)
 int board_early_init_r (void)
 {
 	out_be32 ((unsigned __iomem *)MPC5XXX_BOOTCS_CFG, in_be32 ((unsigned __iomem *)MPC5XXX_BOOTCS_CFG) & ~0x1);
-	out_be32 ((unsigned __iomem *)MPC5XXX_BOOTCS_START, START_REG(CFG_FLASH_BASE));
-	out_be32 ((unsigned __iomem *)MPC5XXX_CS0_START, START_REG(CFG_FLASH_BASE));
+	out_be32 ((unsigned __iomem *)MPC5XXX_BOOTCS_START, START_REG(CONFIG_SYS_FLASH_BASE));
+	out_be32 ((unsigned __iomem *)MPC5XXX_CS0_START, START_REG(CONFIG_SYS_FLASH_BASE));
 	out_be32 ((unsigned __iomem *)MPC5XXX_BOOTCS_STOP,
-		STOP_REG(CFG_FLASH_BASE, CFG_FLASH_SIZE));
+		STOP_REG(CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_SIZE));
 	out_be32 ((unsigned __iomem *)MPC5XXX_CS0_STOP,
-		STOP_REG(CFG_FLASH_BASE, CFG_FLASH_SIZE));
+		STOP_REG(CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_SIZE));
 	return 0;
 }
 
 int last_stage_init (void)
 {
-        out_8 ((volatile uchar *)(CFG_DISPLAY_BASE + 0x38), 'M');
-        out_8 ((volatile uchar *)(CFG_DISPLAY_BASE + 0x39), 'U');
-        out_8 ((volatile uchar *)(CFG_DISPLAY_BASE + 0x3A), 'C');
-        out_8 ((volatile uchar *)(CFG_DISPLAY_BASE + 0x3B), '.');
-        out_8 ((volatile uchar *)(CFG_DISPLAY_BASE + 0x3C), 'M');
-        out_8 ((volatile uchar *)(CFG_DISPLAY_BASE + 0x3D), 'C');
-        out_8 ((volatile uchar *)(CFG_DISPLAY_BASE + 0x3E), '5');
-        out_8 ((volatile uchar *)(CFG_DISPLAY_BASE + 0x3F), '2');
-
-        return 0;
+	out_8 ((volatile uchar *)(CONFIG_SYS_DISPLAY_BASE + 0x38), 'M');
+	out_8 ((volatile uchar *)(CONFIG_SYS_DISPLAY_BASE + 0x39), 'U');
+	out_8 ((volatile uchar *)(CONFIG_SYS_DISPLAY_BASE + 0x3A), 'C');
+	out_8 ((volatile uchar *)(CONFIG_SYS_DISPLAY_BASE + 0x3B), '.');
+	out_8 ((volatile uchar *)(CONFIG_SYS_DISPLAY_BASE + 0x3C), 'M');
+	out_8 ((volatile uchar *)(CONFIG_SYS_DISPLAY_BASE + 0x3D), 'C');
+	out_8 ((volatile uchar *)(CONFIG_SYS_DISPLAY_BASE + 0x3E), '5');
+	out_8 ((volatile uchar *)(CONFIG_SYS_DISPLAY_BASE + 0x3F), '2');
+
+	return 0;
 }
 
 #if defined(CONFIG_HW_WATCHDOG)
diff --git a/board/munices/munices.c b/board/munices/munices.c
index 162f89c50..c1207f196 100644
--- a/board/munices/munices.c
+++ b/board/munices/munices.c
@@ -27,7 +27,7 @@
 
 #include "mt48lc16m16a2-75.h"
 
-#ifndef CFG_RAMBOOT
+#ifndef CONFIG_SYS_RAMBOOT
 static void sdram_start (int hi_addr)
 {
 	long hi_addr_bit = hi_addr ? 0x01000000 : 0;
@@ -70,7 +70,7 @@ static void sdram_start (int hi_addr)
 
 /*
  * ATTENTION: Although partially referenced initdram does NOT make real use
- *            use of CFG_SDRAM_BASE. The code does not work if CFG_SDRAM_BASE
+ *            use of CONFIG_SYS_SDRAM_BASE. The code does not work if CONFIG_SYS_SDRAM_BASE
  *            is something else than 0x00000000.
  */
 
@@ -78,7 +78,7 @@ phys_size_t initdram (int board_type)
 {
 	ulong dramsize = 0;
 	ulong dramsize2 = 0;
-#ifndef CFG_RAMBOOT
+#ifndef CONFIG_SYS_RAMBOOT
 	ulong test1, test2;
 
 	/* setup SDRAM chip selects */
@@ -99,9 +99,9 @@ phys_size_t initdram (int board_type)
 
 	/* find RAM size using SDRAM CS0 only */
 	sdram_start(0);
-	test1 = (ulong )get_ram_size((long *)CFG_SDRAM_BASE, 0x10000000);
+	test1 = (ulong )get_ram_size((long *)CONFIG_SYS_SDRAM_BASE, 0x10000000);
 	sdram_start(1);
-	test2 = (ulong )get_ram_size((long *)CFG_SDRAM_BASE, 0x10000000);
+	test2 = (ulong )get_ram_size((long *)CONFIG_SYS_SDRAM_BASE, 0x10000000);
 	if (test1 > test2) {
 		sdram_start(0);
 		dramsize = test1;
@@ -121,7 +121,7 @@ phys_size_t initdram (int board_type)
 		*(vu_long *)MPC5XXX_SDRAM_CS0CFG = 0; /* disabled */
 	}
 
-#else /* CFG_RAMBOOT */
+#else /* CONFIG_SYS_RAMBOOT */
 
 	/* retrieve size of memory connected to SDRAM CS0 */
 	dramsize = *(vu_long *)MPC5XXX_SDRAM_CS0CFG & 0xFF;
@@ -139,7 +139,7 @@ phys_size_t initdram (int board_type)
 		dramsize2 = 0;
 	}
 
-#endif /* CFG_RAMBOOT */
+#endif /* CONFIG_SYS_RAMBOOT */
 
 	return dramsize + dramsize2;
 }
diff --git a/board/munices/u-boot.lds b/board/munices/u-boot.lds
index e9b3be8ea..0a1a6ad43 100644
--- a/board/munices/u-boot.lds
+++ b/board/munices/u-boot.lds
@@ -116,6 +116,7 @@ SECTIONS
    *(.dynbss)
    *(.bss)
    *(COMMON)
+   . = ALIGN(4);
   }
   _end = . ;
   PROVIDE (end = .);
diff --git a/board/musenki/flash.c b/board/musenki/flash.c
index cd33d8ed3..40965be45 100644
--- a/board/musenki/flash.c
+++ b/board/musenki/flash.c
@@ -24,15 +24,15 @@
 #include <common.h>
 #include <mpc824x.h>
 
-#if defined(CFG_ENV_IS_IN_FLASH)
-# ifndef  CFG_ENV_ADDR
-#  define CFG_ENV_ADDR	(CFG_FLASH_BASE + CFG_ENV_OFFSET)
+#if defined(CONFIG_ENV_IS_IN_FLASH)
+# ifndef  CONFIG_ENV_ADDR
+#  define CONFIG_ENV_ADDR	(CONFIG_SYS_FLASH_BASE + CONFIG_ENV_OFFSET)
 # endif
-# ifndef  CFG_ENV_SIZE
-#  define CFG_ENV_SIZE	CFG_ENV_SECT_SIZE
+# ifndef  CONFIG_ENV_SIZE
+#  define CONFIG_ENV_SIZE	CONFIG_ENV_SECT_SIZE
 # endif
-# ifndef  CFG_ENV_SECT_SIZE
-#  define CFG_ENV_SECT_SIZE  CFG_ENV_SIZE
+# ifndef  CONFIG_ENV_SECT_SIZE
+#  define CONFIG_ENV_SECT_SIZE  CONFIG_ENV_SIZE
 # endif
 #endif
 
@@ -46,7 +46,7 @@
 #endif
 /*---------------------------------------------------------------------*/
 
-flash_info_t	flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips	*/
+flash_info_t	flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips	*/
 
 /*-----------------------------------------------------------------------
  * Functions
@@ -118,15 +118,15 @@ unsigned long flash_init (void)
 	int i;
 
 	/* Init: no FLASHes known */
-	for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) {
+	for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
 		flash_info[i].flash_id = FLASH_UNKNOWN;
 	}
 
 	/* Static FLASH Bank configuration here - FIXME XXX */
 
-	DEBUGF("\n## Get flash bank 1 size @ 0x%08x\n",CFG_FLASH_BASE0_PRELIM);
+	DEBUGF("\n## Get flash bank 1 size @ 0x%08x\n",CONFIG_SYS_FLASH_BASE0_PRELIM);
 
-	size_b0 = flash_get_size((vu_char *)CFG_FLASH_BASE0_PRELIM, &flash_info[0]);
+	size_b0 = flash_get_size((vu_char *)CONFIG_SYS_FLASH_BASE0_PRELIM, &flash_info[0]);
 
 	if (flash_info[0].flash_id == FLASH_UNKNOWN) {
 		printf ("## Unknown FLASH on Bank 0: "
@@ -135,50 +135,50 @@ unsigned long flash_init (void)
 			size_b0, size_b0<<20);
 	}
 
-	DEBUGF("## Get flash bank 2 size @ 0x%08x\n",CFG_FLASH_BASE1_PRELIM);
-	size_b1 = flash_get_size((vu_char *)CFG_FLASH_BASE1_PRELIM, &flash_info[1]);
+	DEBUGF("## Get flash bank 2 size @ 0x%08x\n",CONFIG_SYS_FLASH_BASE1_PRELIM);
+	size_b1 = flash_get_size((vu_char *)CONFIG_SYS_FLASH_BASE1_PRELIM, &flash_info[1]);
 
 	DEBUGF("## Prelim. Flash bank sizes: %08lx + 0x%08lx\n",size_b0,size_b1);
 
-	flash_get_offsets (CFG_FLASH_BASE, &flash_info[0]);
+	flash_get_offsets (CONFIG_SYS_FLASH_BASE, &flash_info[0]);
 
 	flash_info[0].size = size_b0;
 
-#if CFG_MONITOR_BASE >= CFG_FLASH_BASE
-	DEBUGF("protect monitor %x @ %x\n", CFG_MONITOR_BASE, monitor_flash_len);
+#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE
+	DEBUGF("protect monitor %x @ %x\n", CONFIG_SYS_MONITOR_BASE, monitor_flash_len);
 	/* monitor protection ON by default */
 	flash_protect(FLAG_PROTECT_SET,
-		      CFG_MONITOR_BASE,
-		      CFG_MONITOR_BASE+monitor_flash_len-1,
+		      CONFIG_SYS_MONITOR_BASE,
+		      CONFIG_SYS_MONITOR_BASE+monitor_flash_len-1,
 		      &flash_info[0]);
 #endif
 
-#ifdef	CFG_ENV_IS_IN_FLASH
+#ifdef	CONFIG_ENV_IS_IN_FLASH
 	/* ENV protection ON by default */
-	DEBUGF("protect environtment %x @ %x\n", CFG_ENV_ADDR, CFG_ENV_SECT_SIZE);
+	DEBUGF("protect environtment %x @ %x\n", CONFIG_ENV_ADDR, CONFIG_ENV_SECT_SIZE);
 	flash_protect(FLAG_PROTECT_SET,
-		      CFG_ENV_ADDR,
-		      CFG_ENV_ADDR+CFG_ENV_SECT_SIZE-1,
+		      CONFIG_ENV_ADDR,
+		      CONFIG_ENV_ADDR+CONFIG_ENV_SECT_SIZE-1,
 		      &flash_info[0]);
 #endif
 
 	if (size_b1) {
 		flash_info[1].size = size_b1;
-		flash_get_offsets (CFG_FLASH_BASE + size_b0, &flash_info[1]);
+		flash_get_offsets (CONFIG_SYS_FLASH_BASE + size_b0, &flash_info[1]);
 
-#if CFG_MONITOR_BASE >= CFG_FLASH_BASE
+#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE
 		/* monitor protection ON by default */
 		flash_protect(FLAG_PROTECT_SET,
-			      CFG_MONITOR_BASE,
-			      CFG_MONITOR_BASE+monitor_flash_len-1,
+			      CONFIG_SYS_MONITOR_BASE,
+			      CONFIG_SYS_MONITOR_BASE+monitor_flash_len-1,
 			      &flash_info[1]);
 #endif
 
-#ifdef	CFG_ENV_IS_IN_FLASH
+#ifdef	CONFIG_ENV_IS_IN_FLASH
 		/* ENV protection ON by default */
 		flash_protect(FLAG_PROTECT_SET,
-			      CFG_ENV_ADDR,
-			      CFG_ENV_ADDR+CFG_ENV_SECT_SIZE-1,
+			      CONFIG_ENV_ADDR,
+			      CONFIG_ENV_ADDR+CONFIG_ENV_SECT_SIZE-1,
 			      &flash_info[1]);
 #endif
 	} else {
@@ -343,10 +343,10 @@ static ulong flash_get_size (vu_char *addr, flash_info_t *info)
 
 	}
 
-	if (info->sector_count > CFG_MAX_FLASH_SECT) {
+	if (info->sector_count > CONFIG_SYS_MAX_FLASH_SECT) {
 		printf ("** ERROR: sector count %d > max (%d) **\n",
-			info->sector_count, CFG_MAX_FLASH_SECT);
-		info->sector_count = CFG_MAX_FLASH_SECT;
+			info->sector_count, CONFIG_SYS_MAX_FLASH_SECT);
+		info->sector_count = CONFIG_SYS_MAX_FLASH_SECT;
 	}
 
 	addr[0] = BS(0xFF);		/* restore read mode */
@@ -414,7 +414,7 @@ int	flash_erase (flash_info_t *info, int s_first, int s_last)
 			udelay (1000);
 
 			while (((status = BS(*addr)) & BYTEME(0x00800080)) != BYTEME(0x00800080)) {
-				if ((now=get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+				if ((now=get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
 					printf ("Timeout\n");
 					*addr = BS(0xB0); /* suspend erase	  */
 					*addr = BS(0xFF); /* reset to read mode */
@@ -497,7 +497,7 @@ static int write_data (flash_info_t *info, uchar *dest, uchar data)
 	start = get_timer (0);
 
 	while (((status = BS(*addr)) & BYTEME(0x00800080)) != BYTEME(0x00800080)) {
-		if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+		if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
 			*addr = BS(0xFF);	/* restore read mode */
 			return 1;
 		}
diff --git a/board/musenki/musenki.c b/board/musenki/musenki.c
index b2b70e756..30b95ce1d 100644
--- a/board/musenki/musenki.c
+++ b/board/musenki/musenki.c
@@ -24,6 +24,7 @@
 #include <common.h>
 #include <mpc824x.h>
 #include <pci.h>
+#include <netdev.h>
 
 int checkboard (void)
 {
@@ -52,7 +53,7 @@ phys_size_t initdram (int board_type)
 	long mear1;
 	long emear1;
 
-	size = get_ram_size(CFG_SDRAM_BASE, CFG_MAX_RAM_SIZE);
+	size = get_ram_size(CONFIG_SYS_SDRAM_BASE, CONFIG_SYS_MAX_RAM_SIZE);
 
 	new_bank0_end = size - 1;
 	mear1 = mpc824x_mpc107_getreg(MEAR1);
@@ -102,3 +103,8 @@ void pci_init_board(void)
 {
 	pci_mpc824x_init(&hose);
 }
+
+int board_eth_init(bd_t *bis)
+{
+	return pci_eth_init(bis);
+}
diff --git a/board/mvblue/flash.c b/board/mvblue/flash.c
index 0c0738cf2..2d6acf5a7 100644
--- a/board/mvblue/flash.c
+++ b/board/mvblue/flash.c
@@ -31,7 +31,7 @@
 	#define mvdebug(p)
 #endif
 
-flash_info_t	flash_info[CFG_MAX_FLASH_BANKS];
+flash_info_t	flash_info[CONFIG_SYS_MAX_FLASH_BANKS];
 
 #define FLASH_BUS_WIDTH		8
 
@@ -65,7 +65,7 @@ unsigned long flash_init (void)
 	unsigned long size_b0;
 	int i;
 
-	for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) {
+	for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
 		flash_info[i].flash_id = FLASH_UNKNOWN;
 	}
 
@@ -416,7 +416,7 @@ int	flash_erase (flash_info_t *info, int s_first, int s_last)
 	addr = (FDT *)(info->start[l_sect]);
 
 	while ((addr[0] & ERASE_CONFIRM_DATA) != ERASE_CONFIRM_DATA) {
-		if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+		if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
 			printf ("Timeout\n");
 			return 1;
 		}
@@ -554,7 +554,7 @@ static int write_char (flash_info_t *info, ulong dest, uchar data)
 	start = get_timer (0);
 	addr = (vu_char *)dest;
 	while (( (*addr) & WRITE_CONFIRM_DATA) != (data & WRITE_CONFIRM_DATA)) {
-		if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+		if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
 			printf(" *** ERROR: Flash write timeout !");
 			return (1);
 		}
diff --git a/board/mvblue/mvblue.c b/board/mvblue/mvblue.c
index a979102ab..69abb0625 100644
--- a/board/mvblue/mvblue.c
+++ b/board/mvblue/mvblue.c
@@ -9,6 +9,7 @@
 #include <mpc824x.h>
 #include <asm/io.h>
 #include <ns16550.h>
+#include <netdev.h>
 
 #ifdef CONFIG_PCI
 #include <pci.h>
@@ -37,8 +38,8 @@ u32 get_BoardType ()
 
 void init_2nd_DUART (void)
 {
-	NS16550_t console = (NS16550_t) CFG_NS16550_COM2;
-	int clock_divisor = CFG_NS16550_CLK / 16 / CONFIG_BAUDRATE;
+	NS16550_t console = (NS16550_t) CONFIG_SYS_NS16550_COM2;
+	int clock_divisor = CONFIG_SYS_NS16550_CLK / 16 / CONFIG_BAUDRATE;
 
 	*(u8 *) (0xfc004511) = 0x1;
 	NS16550_init (console, clock_divisor);
@@ -83,7 +84,7 @@ phys_size_t initdram (int board_type)
 	long mear1;
 	long emear1;
 
-	size = get_ram_size(CFG_SDRAM_BASE, CFG_MAX_RAM_SIZE);
+	size = get_ram_size(CONFIG_SYS_SDRAM_BASE, CONFIG_SYS_MAX_RAM_SIZE);
 
 	new_bank0_end = size - 1;
 	mear1 = mpc824x_mpc107_getreg(MEAR1);
@@ -146,12 +147,12 @@ void pci_mvblue_clear_base (struct pci_controller *hose, pci_dev_t dev)
 void duart_setup (u32 base, u16 divisor)
 {
 	printf ("duart setup ...");
-	out_8 ((u8 *) (CFG_ISA_IO + base + 3), 0x80);
-	out_8 ((u8 *) (CFG_ISA_IO + base + 0), divisor & 0xff);
-	out_8 ((u8 *) (CFG_ISA_IO + base + 1), divisor >> 8);
-	out_8 ((u8 *) (CFG_ISA_IO + base + 3), 0x03);
-	out_8 ((u8 *) (CFG_ISA_IO + base + 4), 0x03);
-	out_8 ((u8 *) (CFG_ISA_IO + base + 2), 0x07);
+	out_8 ((u8 *) (CONFIG_SYS_ISA_IO + base + 3), 0x80);
+	out_8 ((u8 *) (CONFIG_SYS_ISA_IO + base + 0), divisor & 0xff);
+	out_8 ((u8 *) (CONFIG_SYS_ISA_IO + base + 1), divisor >> 8);
+	out_8 ((u8 *) (CONFIG_SYS_ISA_IO + base + 3), 0x03);
+	out_8 ((u8 *) (CONFIG_SYS_ISA_IO + base + 4), 0x03);
+	out_8 ((u8 *) (CONFIG_SYS_ISA_IO + base + 2), 0x07);
 	printf ("done\n");
 }
 
@@ -245,4 +246,9 @@ void pci_init_board (void)
 {
 	pci_mpc824x_init (&hose);
 }
+
+int board_eth_init(bd_t *bis)
+{
+	return pci_eth_init(bis);
+}
 #endif
diff --git a/board/mx1ads/syncflash.c b/board/mx1ads/syncflash.c
index fae9fbb39..47f613c7f 100644
--- a/board/mx1ads/syncflash.c
+++ b/board/mx1ads/syncflash.c
@@ -31,7 +31,7 @@ typedef unsigned long * p_u32;
 
 /* 4Mx16x2 IAM=0 CSD1 */
 
-flash_info_t flash_info[CFG_MAX_FLASH_BANKS];	/* info for FLASH chips    */
+flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];	/* info for FLASH chips    */
 
 /*  Following Setting is for CSD1	*/
 #define SFCTL			0x00221004
@@ -46,7 +46,7 @@ flash_info_t flash_info[CFG_MAX_FLASH_BANKS];	/* info for FLASH chips    */
 #define CMD_LCR			(CMD_NORMAL + 0x60000000)	/* LCR Command			*/
 #define CMD_PROGRAM		(CMD_NORMAL + 0x70000000)
 
-#define MODE_REG_VAL		(CFG_FLASH_BASE+0x0008CC00)	/* Cas Latency 3		*/
+#define MODE_REG_VAL		(CONFIG_SYS_FLASH_BASE+0x0008CC00)	/* Cas Latency 3		*/
 
 /* LCR Command */
 #define LCR_READSTATUS		(0x0001C000)			/* 0x70				*/
@@ -60,12 +60,12 @@ u32 SF_SR(void) {
 	u32 tmp,tmp1;
 
 	reg_SFCTL	= CMD_PROGRAM;
-	tmp		= __REG(CFG_FLASH_BASE);
+	tmp		= __REG(CONFIG_SYS_FLASH_BASE);
 
 	reg_SFCTL	= CMD_NORMAL;
 
 	reg_SFCTL	= CMD_LCR;			/* Activate LCR Mode		*/
-	tmp1		= __REG(CFG_FLASH_BASE + LCR_SR_CLEAR);
+	tmp1		= __REG(CONFIG_SYS_FLASH_BASE + LCR_SR_CLEAR);
 
 	return tmp;
 }
@@ -96,7 +96,7 @@ void SF_PrechargeAll(void) {
 	u32 tmp;
 
 	reg_SFCTL	= CMD_PREC;			/* Set Precharge Command	*/
-	tmp		= __REG(CFG_FLASH_BASE + SYNCFLASH_A10); /* Issue Precharge All Command */
+	tmp		= __REG(CONFIG_SYS_FLASH_BASE + SYNCFLASH_A10); /* Issue Precharge All Command */
 }
 
 /* set SyncFlash to normal mode			*/
@@ -130,10 +130,10 @@ void SF_NvmodeErase(void) {
 	SF_PrechargeAll();
 
 	reg_SFCTL	= CMD_LCR;			/* Set to LCR mode		*/
-	__REG(CFG_FLASH_BASE + LCR_ERASE_NVMODE)  = 0;	/* Issue Erase Nvmode Reg Command */
+	__REG(CONFIG_SYS_FLASH_BASE + LCR_ERASE_NVMODE)  = 0;	/* Issue Erase Nvmode Reg Command */
 
 	reg_SFCTL	= CMD_NORMAL;			/* Return to Normal mode	*/
-	__REG(CFG_FLASH_BASE + LCR_ERASE_NVMODE) = 0xC0C0C0C0;	/* Confirm		*/
+	__REG(CONFIG_SYS_FLASH_BASE + LCR_ERASE_NVMODE) = 0xC0C0C0C0;	/* Confirm		*/
 
 	while(!SF_Ready());
 }
@@ -142,10 +142,10 @@ void SF_NvmodeWrite(void) {
 	SF_PrechargeAll();
 
 	reg_SFCTL	= CMD_LCR;			/* Set to LCR mode		*/
-	__REG(CFG_FLASH_BASE+LCR_PROG_NVMODE) = 0;	/* Issue Program Nvmode reg command */
+	__REG(CONFIG_SYS_FLASH_BASE+LCR_PROG_NVMODE) = 0;	/* Issue Program Nvmode reg command */
 
 	reg_SFCTL	= CMD_NORMAL;			/* Return to Normal mode	*/
-	__REG(CFG_FLASH_BASE+LCR_PROG_NVMODE) = 0xC0C0C0C0;	/* Confirm not needed	*/
+	__REG(CONFIG_SYS_FLASH_BASE+LCR_PROG_NVMODE) = 0xC0C0C0C0;	/* Confirm not needed	*/
 }
 
 /****************************************************************************************/
@@ -169,22 +169,22 @@ ulong flash_init(void) {
 	flash_info[i].flash_id	=  FLASH_MAN_MT | FLASH_MT28S4M16LC;
 
 	flash_info[i].size	= FLASH_BANK_SIZE;
-	flash_info[i].sector_count = CFG_MAX_FLASH_SECT;
+	flash_info[i].sector_count = CONFIG_SYS_MAX_FLASH_SECT;
 
-	memset(flash_info[i].protect, 0, CFG_MAX_FLASH_SECT);
+	memset(flash_info[i].protect, 0, CONFIG_SYS_MAX_FLASH_SECT);
 
 	for (j = 0; j < flash_info[i].sector_count; j++) {
-		flash_info[i].start[j] = CFG_FLASH_BASE + j * 0x00100000;
+		flash_info[i].start[j] = CONFIG_SYS_FLASH_BASE + j * 0x00100000;
 	}
 
 	flash_protect(FLAG_PROTECT_SET,
-		CFG_FLASH_BASE,
-		CFG_FLASH_BASE + monitor_flash_len - 1,
+		CONFIG_SYS_FLASH_BASE,
+		CONFIG_SYS_FLASH_BASE + monitor_flash_len - 1,
 		&flash_info[0]);
 
 	flash_protect(FLAG_PROTECT_SET,
-		CFG_ENV_ADDR,
-		CFG_ENV_ADDR + CFG_ENV_SIZE - 1,
+		CONFIG_ENV_ADDR,
+		CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1,
 		&flash_info[0]);
 
 	return FLASH_BANK_SIZE;
@@ -281,7 +281,7 @@ int flash_erase (flash_info_t *info, int s_first, int s_last) {
 		SF_NvmodeErase();
 		SF_NvmodeWrite();
 
-		SF_Erase(CFG_FLASH_BASE + (0x0100000 * sect));
+		SF_Erase(CONFIG_SYS_FLASH_BASE + (0x0100000 * sect));
 		SF_Normal();
 
 		printf("ok.\n");
diff --git a/board/mx1ads/u-boot.lds b/board/mx1ads/u-boot.lds
index f2f8afca1..5460c8c0d 100644
--- a/board/mx1ads/u-boot.lds
+++ b/board/mx1ads/u-boot.lds
@@ -53,6 +53,6 @@ SECTIONS
 
 	. = ALIGN(4);
 	__bss_start = .;
-	.bss (NOLOAD) : { *(.bss) }
+	.bss (NOLOAD) : { *(.bss) . = ALIGN(4); }
 	_end = .;
 }
diff --git a/board/mx1fs2/flash.c b/board/mx1fs2/flash.c
index 73ce8957e..da4ebe6e7 100644
--- a/board/mx1fs2/flash.c
+++ b/board/mx1fs2/flash.c
@@ -28,7 +28,7 @@
 #define FLASH_BANK_SIZE MX1FS2_FLASH_BANK_SIZE
 #define MAIN_SECT_SIZE  MX1FS2_FLASH_SECT_SIZE
 
-flash_info_t flash_info[CFG_MAX_FLASH_BANKS];	/* info for FLASH chips   */
+flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];	/* info for FLASH chips   */
 
 /*
  * NOTE - CONFIG_FLASH_16BIT means the CPU interface is 16-bit, it
@@ -62,7 +62,7 @@ static void flash_reset(flash_info_t * info);
 static int write_word_intel(flash_info_t * info, FPWV * dest, FPW data);
 static int write_word_amd(flash_info_t * info, FPWV * dest, FPW data);
 #define write_word(in, de, da)   write_word_amd(in, de, da)
-#ifdef CFG_FLASH_PROTECTION
+#ifdef CONFIG_SYS_FLASH_PROTECTION
 static void flash_sync_real_protect(flash_info_t * info);
 #endif
 
@@ -77,14 +77,14 @@ flash_init(void)
 	int i, j;
 	ulong size = 0;
 
-	for (i = 0; i < CFG_MAX_FLASH_BANKS; i++) {
+	for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) {
 		ulong flashbase = 0;
 		flash_info[i].flash_id =
 		    (FLASH_MAN_AMD & FLASH_VENDMASK) |
 		    (FLASH_AM640U & FLASH_TYPEMASK);
 		flash_info[i].size = FLASH_BANK_SIZE;
-		flash_info[i].sector_count = CFG_MAX_FLASH_SECT;
-		memset(flash_info[i].protect, 0, CFG_MAX_FLASH_SECT);
+		flash_info[i].sector_count = CONFIG_SYS_MAX_FLASH_SECT;
+		memset(flash_info[i].protect, 0, CONFIG_SYS_MAX_FLASH_SECT);
 		switch (i) {
 		case 0:
 			flashbase = MX1FS2_FLASH_BASE;
@@ -101,13 +101,13 @@ flash_init(void)
 
 	/* Protect monitor and environment sectors */
 	flash_protect(FLAG_PROTECT_SET,
-		      CFG_FLASH_BASE,
-		      CFG_FLASH_BASE + _bss_start - _armboot_start,
+		      CONFIG_SYS_FLASH_BASE,
+		      CONFIG_SYS_FLASH_BASE + _bss_start - _armboot_start,
 		      &flash_info[0]);
 
 	flash_protect(FLAG_PROTECT_SET,
-		      CFG_ENV_ADDR,
-		      CFG_ENV_ADDR + CFG_ENV_SIZE - 1, &flash_info[0]);
+		      CONFIG_ENV_ADDR,
+		      CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1, &flash_info[0]);
 
 	return size;
 }
@@ -389,7 +389,7 @@ flash_get_size(FPWV * addr, flash_info_t * info)
 }
 #endif /* 0 */
 
-#ifdef CFG_FLASH_PROTECTION
+#ifdef CONFIG_SYS_FLASH_PROTECTION
 /*-----------------------------------------------------------------------
  */
 
@@ -528,7 +528,7 @@ flash_erase(flash_info_t * info, int s_first, int s_last)
 		udelay(1000);
 
 		while ((*addr & (FPW) 0x00800080) != (FPW) 0x00800080) {
-			if ((now = get_timer(0)) - start > CFG_FLASH_ERASE_TOUT) {
+			if ((now = get_timer(0)) - start > CONFIG_SYS_FLASH_ERASE_TOUT) {
 				printf("Timeout\n");
 
 				if (intel) {
@@ -720,7 +720,7 @@ write_word_amd(flash_info_t * info, FPWV * dest, FPW data)
 	/* data polling for D7 */
 	while (res == 0
 	       && (*dest & (FPW) 0x00800080) != (data & (FPW) 0x00800080)) {
-		if (get_timer(0) - start > CFG_FLASH_WRITE_TOUT) {
+		if (get_timer(0) - start > CONFIG_SYS_FLASH_WRITE_TOUT) {
 			*dest = (FPW) 0x00F000F0;	/* reset bank */
 			printf("SHA timeout\n");
 			res = 1;
@@ -768,7 +768,7 @@ write_word_intel(flash_info_t * info, FPWV * dest, FPW data)
 	start = get_timer(0);
 
 	while (res == 0 && (*dest & (FPW) 0x00800080) != (FPW) 0x00800080) {
-		if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+		if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
 			*dest = (FPW) 0x00B000B0;	/* Suspend program      */
 			res = 1;
 		}
@@ -783,7 +783,7 @@ write_word_intel(flash_info_t * info, FPWV * dest, FPW data)
 	return (res);
 }
 
-#ifdef CFG_FLASH_PROTECTION
+#ifdef CONFIG_SYS_FLASH_PROTECTION
 /*-----------------------------------------------------------------------
  */
 int
diff --git a/board/mx1fs2/lowlevel_init.S b/board/mx1fs2/lowlevel_init.S
index 4b2cb487a..56a4819b0 100644
--- a/board/mx1fs2/lowlevel_init.S
+++ b/board/mx1fs2/lowlevel_init.S
@@ -29,19 +29,19 @@ lowlevel_init:
 
 /* Change PERCLK1DIV to 14 ie 14+1 */
 	ldr		r0,	=PCDR
-	ldr		r1,	=CFG_PCDR_VAL
+	ldr		r1,	=CONFIG_SYS_PCDR_VAL
 	str		r1,   [r0]
 
 /* set MCU PLL Control Register 0 */
 
 	ldr		r0,	=MPCTL0
-	ldr		r1,	=CFG_MPCTL0_VAL
+	ldr		r1,	=CONFIG_SYS_MPCTL0_VAL
 	str		r1,   [r0]
 
 /* set MCU PLL Control Register 1 */
 
 	ldr		r0,	=MPCTL1
-	ldr		r1,	=CFG_MPCTL1_VAL
+	ldr		r1,	=CONFIG_SYS_MPCTL1_VAL
 	str		r1,   [r0]
 
 /* set mpll restart bit */
@@ -63,13 +63,13 @@ lowlevel_init:
 /* set System PLL Control Register 0 */
 
 	ldr		r0,	=SPCTL0
-	ldr		r1,	=CFG_SPCTL0_VAL
+	ldr		r1,	=CONFIG_SYS_SPCTL0_VAL
 	str		r1,   [r0]
 
 /* set System PLL Control Register 1 */
 
 	ldr		r0,	=SPCTL1
-	ldr		r1,	=CFG_SPCTL1_VAL
+	ldr		r1,	=CONFIG_SYS_SPCTL1_VAL
 	str		r1,   [r0]
 
 /* set spll restart bit */
@@ -89,11 +89,11 @@ lowlevel_init:
 	bne		1b
 
 	ldr		r0,   =CSCR
-	ldr		r1,   =CFG_CSCR_VAL
+	ldr		r1,   =CONFIG_SYS_CSCR_VAL
 	str		r1,   [r0]
 
 	ldr		r0,   =GPCR
-	ldr		r1,   =CFG_GPCR_VAL
+	ldr		r1,   =CONFIG_SYS_GPCR_VAL
 	str		r1,   [r0]
 
 /*
@@ -122,43 +122,43 @@ lowlevel_init:
 	MCR p15,0,r0,c1,c0,0
 
 	ldr		r0,	=GIUS(0)
-	ldr		r1,	=CFG_GIUS_A_VAL
+	ldr		r1,	=CONFIG_SYS_GIUS_A_VAL
 	str		r1,   [r0]
 
 	ldr		r0,	=FMCR
-	ldr		r1,	=CFG_FMCR_VAL
+	ldr		r1,	=CONFIG_SYS_FMCR_VAL
 	str		r1,   [r0]
 
 	ldr		r0,	=CS0U
-	ldr		r1,	=CFG_CS0U_VAL
+	ldr		r1,	=CONFIG_SYS_CS0U_VAL
 	str		r1,   [r0]
 
 	ldr		r0,	=CS0L
-	ldr		r1,	=CFG_CS0L_VAL
+	ldr		r1,	=CONFIG_SYS_CS0L_VAL
 	str		r1,   [r0]
 
 	ldr		r0,	=CS1U
-	ldr		r1,	=CFG_CS1U_VAL
+	ldr		r1,	=CONFIG_SYS_CS1U_VAL
 	str		r1,   [r0]
 
 	ldr		r0,	=CS1L
-	ldr		r1,	=CFG_CS1L_VAL
+	ldr		r1,	=CONFIG_SYS_CS1L_VAL
 	str		r1,   [r0]
 
 	ldr		r0,	=CS4U
-	ldr		r1,	=CFG_CS4U_VAL
+	ldr		r1,	=CONFIG_SYS_CS4U_VAL
 	str		r1,   [r0]
 
 	ldr		r0,	=CS4L
-	ldr		r1,	=CFG_CS4L_VAL
+	ldr		r1,	=CONFIG_SYS_CS4L_VAL
 	str		r1,   [r0]
 
 	ldr		r0,	=CS5U
-	ldr		r1,	=CFG_CS5U_VAL
+	ldr		r1,	=CONFIG_SYS_CS5U_VAL
 	str		r1,   [r0]
 
 	ldr		r0,	=CS5L
-	ldr		r1,	=CFG_CS5L_VAL
+	ldr		r1,	=CONFIG_SYS_CS5L_VAL
 	str		r1,   [r0]
 
 /* SDRAM Setup */
diff --git a/board/mx1fs2/u-boot.lds b/board/mx1fs2/u-boot.lds
index 46ed451ee..c96e58a84 100644
--- a/board/mx1fs2/u-boot.lds
+++ b/board/mx1fs2/u-boot.lds
@@ -52,6 +52,6 @@ SECTIONS
 
 	. = ALIGN(4);
 	__bss_start = .;
-	.bss (NOLOAD) : { *(.bss) }
+	.bss (NOLOAD) : { *(.bss) . = ALIGN(4); }
 	_end = .;
 }
diff --git a/board/nc650/flash.c b/board/nc650/flash.c
index 8d7c17265..8a0eab55f 100644
--- a/board/nc650/flash.c
+++ b/board/nc650/flash.c
@@ -34,22 +34,22 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
-#ifndef CFG_OR_TIMING_FLASH_AT_50MHZ
-#define CFG_OR_TIMING_FLASH_AT_50MHZ (OR_ACS_DIV1  | OR_TRLX | OR_CSNT_SAM | \
+#ifndef CONFIG_SYS_OR_TIMING_FLASH_AT_50MHZ
+#define CONFIG_SYS_OR_TIMING_FLASH_AT_50MHZ (OR_ACS_DIV1  | OR_TRLX | OR_CSNT_SAM | \
 				      OR_SCY_2_CLK | OR_EHTR | OR_BI)
 #endif
 
-flash_info_t flash_info[CFG_MAX_FLASH_BANKS];	/* info for FLASH chips    */
+flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];	/* info for FLASH chips    */
 
-#if defined(CFG_ENV_IS_IN_FLASH)
-# ifndef  CFG_ENV_ADDR
-#  define CFG_ENV_ADDR	(CFG_FLASH_BASE + CFG_ENV_OFFSET)
+#if defined(CONFIG_ENV_IS_IN_FLASH)
+# ifndef  CONFIG_ENV_ADDR
+#  define CONFIG_ENV_ADDR	(CONFIG_SYS_FLASH_BASE + CONFIG_ENV_OFFSET)
 # endif
-# ifndef  CFG_ENV_SIZE
-#  define CFG_ENV_SIZE	CFG_ENV_SECT_SIZE
+# ifndef  CONFIG_ENV_SIZE
+#  define CONFIG_ENV_SIZE	CONFIG_ENV_SECT_SIZE
 # endif
-# ifndef  CFG_ENV_SECT_SIZE
-#  define CFG_ENV_SECT_SIZE  CFG_ENV_SIZE
+# ifndef  CONFIG_ENV_SECT_SIZE
+#  define CONFIG_ENV_SECT_SIZE  CONFIG_ENV_SIZE
 # endif
 #endif
 
@@ -90,15 +90,15 @@ static void flash_get_offsets (ulong base, flash_info_t * info);
 
 unsigned long flash_init (void)
 {
-	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
 	volatile memctl8xx_t *memctl = &immap->im_memctl;
 	unsigned long size_b0;
 	int i;
-#ifdef CFG_OR_TIMING_FLASH_AT_50MHZ
+#ifdef CONFIG_SYS_OR_TIMING_FLASH_AT_50MHZ
 	int scy, trlx, flash_or_timing, clk_diff;
 
-	scy = (CFG_OR_TIMING_FLASH_AT_50MHZ & OR_SCY_MSK) >> 4;
-	if (CFG_OR_TIMING_FLASH_AT_50MHZ & OR_TRLX) {
+	scy = (CONFIG_SYS_OR_TIMING_FLASH_AT_50MHZ & OR_SCY_MSK) >> 4;
+	if (CONFIG_SYS_OR_TIMING_FLASH_AT_50MHZ & OR_TRLX) {
 		trlx = OR_TRLX;
 		scy *= 2;
 	} else
@@ -134,11 +134,11 @@ unsigned long flash_init (void)
 		scy = 1;
 
 	flash_or_timing = (scy << 4) | trlx |
-			  (CFG_OR_TIMING_FLASH_AT_50MHZ & ~(OR_TRLX | OR_SCY_MSK));
+			  (CONFIG_SYS_OR_TIMING_FLASH_AT_50MHZ & ~(OR_TRLX | OR_SCY_MSK));
 #endif
 
 	/* Init: no FLASHes known */
-	for (i = 0; i < CFG_MAX_FLASH_BANKS; ++i) {
+	for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
 		flash_info[i].flash_id = FLASH_UNKNOWN;
 	}
 
@@ -151,31 +151,31 @@ unsigned long flash_init (void)
 	}
 
 	/* Remap FLASH according to real size */
-#ifndef CFG_OR_TIMING_FLASH_AT_50MHZ
-	memctl->memc_or0 = CFG_OR_TIMING_FLASH | (-size_b0 & OR_AM_MSK);
+#ifndef CONFIG_SYS_OR_TIMING_FLASH_AT_50MHZ
+	memctl->memc_or0 = CONFIG_SYS_OR_TIMING_FLASH | (-size_b0 & OR_AM_MSK);
 #else
 	memctl->memc_or0 = flash_or_timing | (-size_b0 & OR_AM_MSK);
 #endif
-	memctl->memc_br0 = (CFG_FLASH_BASE & BR_BA_MSK) | BR_PS_8 | BR_MS_GPCM | BR_V;
+	memctl->memc_br0 = (CONFIG_SYS_FLASH_BASE & BR_BA_MSK) | BR_PS_8 | BR_MS_GPCM | BR_V;
 
 	/* Re-do sizing to get full correct info */
-	size_b0 = flash_get_size ((FPW *) CFG_FLASH_BASE, &flash_info[0]);
+	size_b0 = flash_get_size ((FPW *) CONFIG_SYS_FLASH_BASE, &flash_info[0]);
 
-	flash_get_offsets (CFG_FLASH_BASE, &flash_info[0]);
+	flash_get_offsets (CONFIG_SYS_FLASH_BASE, &flash_info[0]);
 
-#if CFG_MONITOR_BASE >= CFG_FLASH_BASE
+#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE
 	/* monitor protection ON by default */
 	(void) flash_protect (FLAG_PROTECT_SET,
-				CFG_MONITOR_BASE,
-				CFG_MONITOR_BASE + monitor_flash_len - 1,
+				CONFIG_SYS_MONITOR_BASE,
+				CONFIG_SYS_MONITOR_BASE + monitor_flash_len - 1,
 				&flash_info[0]);
 #endif
 
-#ifdef	CFG_ENV_IS_IN_FLASH
+#ifdef	CONFIG_ENV_IS_IN_FLASH
 	/* ENV protection ON by default */
 	flash_protect (FLAG_PROTECT_SET,
-			CFG_ENV_ADDR,
-			CFG_ENV_ADDR + CFG_ENV_SIZE - 1,
+			CONFIG_ENV_ADDR,
+			CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1,
 			&flash_info[0]);
 #endif
 
@@ -316,10 +316,10 @@ static ulong flash_get_size (FPWV * addr, flash_info_t * info)
 		break;
 	}
 
-	if (info->sector_count > CFG_MAX_FLASH_SECT) {
+	if (info->sector_count > CONFIG_SYS_MAX_FLASH_SECT) {
 		printf ("** ERROR: sector count %d > max (%d) **\n",
-				info->sector_count, CFG_MAX_FLASH_SECT);
-		info->sector_count = CFG_MAX_FLASH_SECT;
+				info->sector_count, CONFIG_SYS_MAX_FLASH_SECT);
+		info->sector_count = CONFIG_SYS_MAX_FLASH_SECT;
 	}
 
 	addr[0] = (FPW) 0x00FF00FF;	/* restore read mode */
@@ -390,7 +390,7 @@ int flash_erase (flash_info_t * info, int s_first, int s_last)
 			udelay (1000);
 
 			while (((status = *addr) & (FPW) 0x00800080) != (FPW) 0x00800080) {
-			    if ((now = get_timer (start)) > CFG_FLASH_ERASE_TOUT) {
+			    if ((now = get_timer (start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
 				printf ("Timeout\n");
 				*addr = (FPW) 0x00B000B0;	/* suspend erase     */
 				*addr = (FPW) 0x00FF00FF;	/* reset to read mode */
@@ -530,7 +530,7 @@ static int write_data (flash_info_t * info, ulong dest, FPW data)
 	start = get_timer (0);
 
 	while (((status = *addr) & (FPW) 0x00800080) != (FPW) 0x00800080) {
-		if (get_timer (start) > CFG_FLASH_WRITE_TOUT) {
+		if (get_timer (start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
 			*addr = (FPW) 0x00FF00FF;	/* restore read mode */
 			return (1);
 		}
diff --git a/board/nc650/nc650.c b/board/nc650/nc650.c
index 657abc46d..056230da6 100644
--- a/board/nc650/nc650.c
+++ b/board/nc650/nc650.c
@@ -130,7 +130,7 @@ static long int dram_size (long int, long int *, long int);
 
 phys_size_t initdram (int board_type)
 {
-	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
 	volatile memctl8xx_t *memctl = &immap->im_memctl;
 	long int size8, size9;
 	long int size_b0 = 0;
@@ -145,7 +145,7 @@ phys_size_t initdram (int board_type)
 	 * with two SDRAM banks or four cycles every 31.2 us with one
 	 * bank. It will be adjusted after memory sizing.
 	 */
-	memctl->memc_mptpr = CFG_MPTPR_2BK_8K;
+	memctl->memc_mptpr = CONFIG_SYS_MPTPR_2BK_8K;
 
 	memctl->memc_mar = 0x00000088;
 
@@ -154,10 +154,10 @@ phys_size_t initdram (int board_type)
 	 * preliminary address - these have to be modified after the
 	 * SDRAM size has been determined.
 	 */
-	memctl->memc_or3 = CFG_OR3_PRELIM;
-	memctl->memc_br3 = CFG_BR3_PRELIM;
+	memctl->memc_or3 = CONFIG_SYS_OR3_PRELIM;
+	memctl->memc_br3 = CONFIG_SYS_BR3_PRELIM;
 
-	memctl->memc_mamr = CFG_MAMR_8COL & (~(MAMR_PTAE));	/* no refresh yet */
+	memctl->memc_mamr = CONFIG_SYS_MAMR_8COL & (~(MAMR_PTAE));	/* no refresh yet */
 
 	udelay (200);
 
@@ -177,14 +177,14 @@ phys_size_t initdram (int board_type)
 	 *
 	 * try 8 column mode
 	 */
-	size8 = dram_size (CFG_MAMR_8COL, SDRAM_BASE3_PRELIM, SDRAM_MAX_SIZE);
+	size8 = dram_size (CONFIG_SYS_MAMR_8COL, SDRAM_BASE3_PRELIM, SDRAM_MAX_SIZE);
 
 	udelay (1000);
 
 	/*
 	 * try 9 column mode
 	 */
-	size9 = dram_size (CFG_MAMR_9COL, SDRAM_BASE3_PRELIM, SDRAM_MAX_SIZE);
+	size9 = dram_size (CONFIG_SYS_MAMR_9COL, SDRAM_BASE3_PRELIM, SDRAM_MAX_SIZE);
 
 	udelay (1000);
 
@@ -192,7 +192,7 @@ phys_size_t initdram (int board_type)
 		size_b0 = size9;
 	} else {
 		size_b0 = size8;
-		memctl->memc_mamr = CFG_MAMR_8COL;
+		memctl->memc_mamr = CONFIG_SYS_MAMR_8COL;
 		udelay (500);
 	}
 
@@ -202,7 +202,7 @@ phys_size_t initdram (int board_type)
 	 */
 	if ((size_b0 < 0x02000000)) {
 		/* reduce to 15.6 us (62.4 us / quad) */
-		memctl->memc_mptpr = CFG_MPTPR_2BK_4K;
+		memctl->memc_mptpr = CONFIG_SYS_MPTPR_2BK_4K;
 		udelay (1000);
 	}
 
@@ -210,12 +210,12 @@ phys_size_t initdram (int board_type)
 	 * Final mapping
 	 */
 
-	memctl->memc_or3 = ((-size_b0) & 0xFFFF0000) | CFG_OR_TIMING_SDRAM;
-	memctl->memc_br3 = (CFG_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V;
+	memctl->memc_or3 = ((-size_b0) & 0xFFFF0000) | CONFIG_SYS_OR_TIMING_SDRAM;
+	memctl->memc_br3 = (CONFIG_SYS_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V;
 
 	/* adjust refresh rate depending on SDRAM type, one bank */
 	reg = memctl->memc_mptpr;
-	reg >>= 1;					/* reduce to CFG_MPTPR_1BK_8K / _4K */
+	reg >>= 1;					/* reduce to CONFIG_SYS_MPTPR_1BK_8K / _4K */
 	memctl->memc_mptpr = reg;
 
 	udelay (10000);
@@ -224,7 +224,7 @@ phys_size_t initdram (int board_type)
 	upmconfig (UPMB, (uint *) nand_flash_table,
 			   sizeof (nand_flash_table) / sizeof (uint));
 
-	memctl->memc_mbmr = CFG_MBMR_NAND;
+	memctl->memc_mbmr = CONFIG_SYS_MBMR_NAND;
 
 	return (size_b0);
 }
@@ -241,7 +241,7 @@ phys_size_t initdram (int board_type)
 
 static long int dram_size (long int mamr_value, long int *base, long int maxsize)
 {
-	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
 	volatile memctl8xx_t *memctl = &immap->im_memctl;
 
 	memctl->memc_mamr = mamr_value;
@@ -269,7 +269,7 @@ int misc_init_r(void)
 	   0 - cp850
 	   1 - kp852
 	*/
-	pParam = (char*)(CFG_CPLD_BASE);
+	pParam = (char*)(CONFIG_SYS_CPLD_BASE);
 	if( *pParam != 0)
 		iCompatMode = 1;
 
diff --git a/board/nc650/u-boot.lds b/board/nc650/u-boot.lds
index 09a442aee..ca91ac451 100644
--- a/board/nc650/u-boot.lds
+++ b/board/nc650/u-boot.lds
@@ -122,6 +122,7 @@ SECTIONS
    *(.dynbss)
    *(.bss)
    *(COMMON)
+   . = ALIGN(4);
   }
   _end = . ;
   PROVIDE (end = .);
diff --git a/board/netphone/flash.c b/board/netphone/flash.c
index 0c81140f2..8852127e6 100644
--- a/board/netphone/flash.c
+++ b/board/netphone/flash.c
@@ -24,7 +24,7 @@
 #include <common.h>
 #include <mpc8xx.h>
 
-flash_info_t flash_info[CFG_MAX_FLASH_BANKS];	/* info for FLASH chips    */
+flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];	/* info for FLASH chips    */
 
 /*-----------------------------------------------------------------------
  * Functions
@@ -38,7 +38,7 @@ static void flash_get_offsets(ulong base, flash_info_t * info);
 
 unsigned long flash_init(void)
 {
-	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
 	volatile memctl8xx_t *memctl = &immap->im_memctl;
 	unsigned long size;
 #if CONFIG_NETPHONE_VERSION == 2
@@ -47,7 +47,7 @@ unsigned long flash_init(void)
 	int i;
 
 	/* Init: no FLASHes known */
-	for (i = 0; i < CFG_MAX_FLASH_BANKS; ++i)
+	for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; ++i)
 		flash_info[i].flash_id = FLASH_UNKNOWN;
 
 	size = flash_get_size((vu_long *) FLASH_BASE0_PRELIM, &flash_info[0]);
@@ -58,28 +58,28 @@ unsigned long flash_init(void)
 	}
 
 	/* Remap FLASH according to real size */
-	memctl->memc_or0 = CFG_OR_TIMING_FLASH | (-size & 0xFFFF8000);
-	memctl->memc_br0 = (CFG_FLASH_BASE & BR_BA_MSK) | (memctl->memc_br0 & ~(BR_BA_MSK));
+	memctl->memc_or0 = CONFIG_SYS_OR_TIMING_FLASH | (-size & 0xFFFF8000);
+	memctl->memc_br0 = (CONFIG_SYS_FLASH_BASE & BR_BA_MSK) | (memctl->memc_br0 & ~(BR_BA_MSK));
 
 	/* Re-do sizing to get full correct info */
-	size = flash_get_size((vu_long *) CFG_FLASH_BASE, &flash_info[0]);
+	size = flash_get_size((vu_long *) CONFIG_SYS_FLASH_BASE, &flash_info[0]);
 
-	flash_get_offsets(CFG_FLASH_BASE, &flash_info[0]);
+	flash_get_offsets(CONFIG_SYS_FLASH_BASE, &flash_info[0]);
 
 	/* monitor protection ON by default */
 	flash_protect(FLAG_PROTECT_SET,
-			CFG_FLASH_BASE, CFG_FLASH_BASE + monitor_flash_len - 1,
+			CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE + monitor_flash_len - 1,
 			&flash_info[0]);
 
 	flash_protect ( FLAG_PROTECT_SET,
-			CFG_ENV_ADDR,
-			CFG_ENV_ADDR + CFG_ENV_SIZE - 1,
+			CONFIG_ENV_ADDR,
+			CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1,
 			&flash_info[0]);
 
-#ifdef CFG_ENV_ADDR_REDUND
+#ifdef CONFIG_ENV_ADDR_REDUND
 	flash_protect ( FLAG_PROTECT_SET,
-			CFG_ENV_ADDR_REDUND,
-			CFG_ENV_ADDR_REDUND + CFG_ENV_SIZE_REDUND - 1,
+			CONFIG_ENV_ADDR_REDUND,
+			CONFIG_ENV_ADDR_REDUND + CONFIG_ENV_SIZE_REDUND - 1,
 			&flash_info[0]);
 #endif
 
@@ -92,13 +92,13 @@ unsigned long flash_init(void)
 			printf("## Unknown FLASH on Bank 1 - Size = 0x%08lx = %ld MB\n", size1, size1 << 20);
 
 		/* Remap FLASH according to real size */
-		memctl->memc_or4 = CFG_OR_TIMING_FLASH | (-size1 & 0xFFFF8000);
-		memctl->memc_br4 = (CFG_FLASH_BASE4 & BR_BA_MSK) | (memctl->memc_br4 & ~(BR_BA_MSK));
+		memctl->memc_or4 = CONFIG_SYS_OR_TIMING_FLASH | (-size1 & 0xFFFF8000);
+		memctl->memc_br4 = (CONFIG_SYS_FLASH_BASE4 & BR_BA_MSK) | (memctl->memc_br4 & ~(BR_BA_MSK));
 
 		/* Re-do sizing to get full correct info */
-		size1 = flash_get_size((vu_long *) CFG_FLASH_BASE4, &flash_info[1]);
+		size1 = flash_get_size((vu_long *) CONFIG_SYS_FLASH_BASE4, &flash_info[1]);
 
-		flash_get_offsets(CFG_FLASH_BASE4, &flash_info[1]);
+		flash_get_offsets(CONFIG_SYS_FLASH_BASE4, &flash_info[1]);
 
 		size += size1;
 	} else
@@ -448,7 +448,7 @@ int flash_erase(flash_info_t * info, int s_first, int s_last)
 	last = start;
 	addr = (vu_char *) (info->start[l_sect]);
 	while ((addr[0] & 0x80) != 0x80) {
-		if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+		if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
 			printf("Timeout\n");
 			return 1;
 		}
@@ -521,7 +521,7 @@ static int write_byte(flash_info_t * info, ulong dest, uchar data)
 	/* data polling for D7 */
 	start = get_timer(0);
 	while ((*((vu_char *) dest) & 0x80) != (data & 0x80)) {
-		if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+		if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
 			return (1);
 		}
 	}
diff --git a/board/netphone/netphone.c b/board/netphone/netphone.c
index 38eb7c811..53d317206 100644
--- a/board/netphone/netphone.c
+++ b/board/netphone/netphone.c
@@ -356,7 +356,7 @@ static const uint nandcs_table[0x40] = {
 #define MAR_SDRAM_INIT		((CAS_LATENCY << 6) | 0x00000008LU)
 
 /* 8 */
-#define CFG_MAMR	((CFG_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
+#define CONFIG_SYS_MAMR	((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
 			 MAMR_AMA_TYPE_0 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A11 |	\
 			 MAMR_RLFA_1X	 | MAMR_WLFA_1X	   | MAMR_TLFA_4X)
 
@@ -406,7 +406,7 @@ void check_ram(unsigned int addr, unsigned int size)
 
 phys_size_t initdram(int board_type)
 {
-	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
 	volatile memctl8xx_t *memctl = &immap->im_memctl;
 	long int size;
 
@@ -422,10 +422,10 @@ phys_size_t initdram(int board_type)
 	/*
 	 * Map controller bank 3 to the SDRAM bank at preliminary address.
 	 */
-	memctl->memc_or3 = CFG_OR3_PRELIM;
-	memctl->memc_br3 = CFG_BR3_PRELIM;
+	memctl->memc_or3 = CONFIG_SYS_OR3_PRELIM;
+	memctl->memc_br3 = CONFIG_SYS_BR3_PRELIM;
 
-	memctl->memc_mbmr = CFG_MAMR & ~MAMR_PTAE;	/* no refresh yet */
+	memctl->memc_mbmr = CONFIG_SYS_MAMR & ~MAMR_PTAE;	/* no refresh yet */
 
 	udelay(200);
 
@@ -546,7 +546,7 @@ void reset_phys(void)
 
 int board_early_init_f(void)
 {
-	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
 	volatile iop8xx_t *ioport = &immap->im_ioport;
 	volatile cpm8xx_t *cpm = &immap->im_cpm;
 	volatile memctl8xx_t *memctl = &immap->im_memctl;
@@ -602,13 +602,13 @@ int board_early_init_f(void)
 #include <linux/mtd/nand_legacy.h>
 
 extern ulong nand_probe(ulong physadr);
-extern struct nand_chip nand_dev_desc[CFG_MAX_NAND_DEVICE];
+extern struct nand_chip nand_dev_desc[CONFIG_SYS_MAX_NAND_DEVICE];
 
 void nand_init(void)
 {
 	unsigned long totlen;
 
-	totlen = nand_probe(CFG_NAND_BASE);
+	totlen = nand_probe(CONFIG_SYS_NAND_BASE);
 	printf ("%4lu MB\n", totlen >> 20);
 }
 #endif
@@ -626,7 +626,7 @@ void hw_watchdog_reset(void)
 
 static volatile int left_to_poll = PHONE_CONSOLE_POLL_HZ;	/* poll */
 
-/* called from timer interrupt every 1/CFG_HZ sec */
+/* called from timer interrupt every 1/CONFIG_SYS_HZ sec */
 void board_show_activity(ulong timestamp)
 {
 	if (left_to_poll > -PHONE_CONSOLE_POLL_HZ)
@@ -656,7 +656,7 @@ void show_activity(int arg)
 
 #endif
 
-#if defined(CFG_CONSOLE_IS_IN_ENV) && defined(CFG_CONSOLE_OVERWRITE_ROUTINE)
+#if defined(CONFIG_SYS_CONSOLE_IS_IN_ENV) && defined(CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE)
 int overwrite_console(void)
 {
 	/* printf("overwrite_console called\n"); */
@@ -679,16 +679,16 @@ int last_stage_init(void)
 
 #if CONFIG_NETPHONE_VERSION == 2
 	/* assert peripheral reset */
-	((volatile immap_t *)CFG_IMMR)->im_ioport.iop_pcdat &= ~_BW(12);
+	((volatile immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pcdat &= ~_BW(12);
 	for (i = 0; i < 10; i++)
 		udelay(1000);
-	((volatile immap_t *)CFG_IMMR)->im_ioport.iop_pcdat |=  _BW(12);
+	((volatile immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pcdat |=  _BW(12);
 #endif
 	reset_phys();
 
 	/* check in order to enable the local console */
 	left_to_poll = PHONE_CONSOLE_POLL_HZ;
-	i = CFG_HZ * 2;
+	i = CONFIG_SYS_HZ * 2;
 	while (i > 0) {
 
 		if (tstc()) {
@@ -702,7 +702,7 @@ int last_stage_init(void)
 			status_led_set(0, STATUS_LED_ON);
 			while (!drv_phone_is_idle()) {
 				do_poll();
-				udelay(1000000 / CFG_HZ);
+				udelay(1000000 / CONFIG_SYS_HZ);
 			}
 
 			console_assign(stdin, "phone");
@@ -712,7 +712,7 @@ int last_stage_init(void)
 			break;
 		}
 
-		udelay(1000000 / CFG_HZ);
+		udelay(1000000 / CONFIG_SYS_HZ);
 		i--;
 		left_to_poll--;
 	}
diff --git a/board/netphone/phone_console.c b/board/netphone/phone_console.c
index 408ada016..d9b0ad376 100644
--- a/board/netphone/phone_console.c
+++ b/board/netphone/phone_console.c
@@ -46,43 +46,43 @@
 #define ROWS	24
 #define COLS	80
 
-#define REFRESH_HZ		(CFG_HZ/50)	/* refresh every 20ms */
-#define BLINK_HZ		(CFG_HZ/2)	/* cursor blink every 500ms */
+#define REFRESH_HZ		(CONFIG_SYS_HZ/50)	/* refresh every 20ms */
+#define BLINK_HZ		(CONFIG_SYS_HZ/2)	/* cursor blink every 500ms */
 
 /*************************************************************************************************/
 
-#define DISPLAY_BACKLIT_PORT	((volatile immap_t *)CFG_IMMR)->im_ioport.iop_pcdat
+#define DISPLAY_BACKLIT_PORT	((volatile immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pcdat
 #define DISPLAY_BACKLIT_MASK	0x0010
 
 /*************************************************************************************************/
 
-#define KP_STABLE_HZ		(CFG_HZ/100)	/* stable for 10ms */
-#define KP_REPEAT_DELAY_HZ	(CFG_HZ/4)	/* delay before repeat 250ms */
-#define KP_REPEAT_HZ		(CFG_HZ/20)	/* repeat every 50ms */
-#define KP_FORCE_DELAY_HZ	(CFG_HZ/2)	/* key was force pressed */
-#define KP_IDLE_DELAY_HZ	(CFG_HZ/2)	/* key was released and idle */
+#define KP_STABLE_HZ		(CONFIG_SYS_HZ/100)	/* stable for 10ms */
+#define KP_REPEAT_DELAY_HZ	(CONFIG_SYS_HZ/4)	/* delay before repeat 250ms */
+#define KP_REPEAT_HZ		(CONFIG_SYS_HZ/20)	/* repeat every 50ms */
+#define KP_FORCE_DELAY_HZ	(CONFIG_SYS_HZ/2)	/* key was force pressed */
+#define KP_IDLE_DELAY_HZ	(CONFIG_SYS_HZ/2)	/* key was released and idle */
 
 #if CONFIG_NETPHONE_VERSION == 1
-#define KP_SPI_RXD_PORT (((volatile immap_t *)CFG_IMMR)->im_ioport.iop_pcdat)
+#define KP_SPI_RXD_PORT (((volatile immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pcdat)
 #define KP_SPI_RXD_MASK 0x0008
 
-#define KP_SPI_TXD_PORT (((volatile immap_t *)CFG_IMMR)->im_ioport.iop_pcdat)
+#define KP_SPI_TXD_PORT (((volatile immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pcdat)
 #define KP_SPI_TXD_MASK 0x0004
 
-#define KP_SPI_CLK_PORT (((volatile immap_t *)CFG_IMMR)->im_ioport.iop_pcdat)
+#define KP_SPI_CLK_PORT (((volatile immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pcdat)
 #define KP_SPI_CLK_MASK 0x0001
 #elif CONFIG_NETPHONE_VERSION == 2
-#define KP_SPI_RXD_PORT (((volatile immap_t *)CFG_IMMR)->im_cpm.cp_pbdat)
+#define KP_SPI_RXD_PORT (((volatile immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pbdat)
 #define KP_SPI_RXD_MASK 0x00000008
 
-#define KP_SPI_TXD_PORT (((volatile immap_t *)CFG_IMMR)->im_cpm.cp_pbdat)
+#define KP_SPI_TXD_PORT (((volatile immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pbdat)
 #define KP_SPI_TXD_MASK 0x00000004
 
-#define KP_SPI_CLK_PORT (((volatile immap_t *)CFG_IMMR)->im_cpm.cp_pbdat)
+#define KP_SPI_CLK_PORT (((volatile immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pbdat)
 #define KP_SPI_CLK_MASK 0x00000002
 #endif
 
-#define KP_CS_PORT	(((volatile immap_t *)CFG_IMMR)->im_cpm.cp_pedat)
+#define KP_CS_PORT	(((volatile immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pedat)
 #define KP_CS_MASK	0x00000010
 
 #define KP_SPI_RXD() (KP_SPI_RXD_PORT & KP_SPI_RXD_MASK)
@@ -983,7 +983,7 @@ unsigned int kp_get_col_mask(unsigned int row_mask)
 #if CONFIG_NETPHONE_VERSION == 1
 	col_mask = kp_data_transfer(val) & 0x0F;
 #elif CONFIG_NETPHONE_VERSION == 2
-	col_mask = ((volatile immap_t *)CFG_IMMR)->im_cpm.cp_pedat & 0x0f;
+	col_mask = ((volatile immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pedat & 0x0f;
 	/* XXX FUCK FUCK FUCK FUCK FUCK!!!! */
 	col_mask = ((col_mask & 0x08) >> 3) |	/* BKBR1 */
 		   ((col_mask & 0x04) << 1) |	/* BKBR2 */
diff --git a/board/netphone/u-boot.lds b/board/netphone/u-boot.lds
index 271102b77..88365605d 100644
--- a/board/netphone/u-boot.lds
+++ b/board/netphone/u-boot.lds
@@ -63,7 +63,7 @@ SECTIONS
     lib_ppc/time.o		(.text)
 
     . = DEFINED(env_offset) ? env_offset : .;
-    common/environment.o	(.text)
+    common/env_embedded.o	(.text)
 
     *(.text)
     *(.fixup)
@@ -134,6 +134,7 @@ SECTIONS
    *(.dynbss)
    *(.bss)
    *(COMMON)
+   . = ALIGN(4);
   }
   _end = . ;
   PROVIDE (end = .);
diff --git a/board/netphone/u-boot.lds.debug b/board/netphone/u-boot.lds.debug
index 5bf1a6628..d47c4082a 100644
--- a/board/netphone/u-boot.lds.debug
+++ b/board/netphone/u-boot.lds.debug
@@ -61,7 +61,7 @@ SECTIONS
     lib_generic/crc32.o		(.text)
 
     . = env_offset;
-    common/environment.o(.text)
+    common/env_embedded.o(.text)
 
     *(.text)
     *(.fixup)
diff --git a/board/netstal/hcu4/hcu4.c b/board/netstal/hcu4/hcu4.c
index c14474182..aa8a0975c 100644
--- a/board/netstal/hcu4/hcu4.c
+++ b/board/netstal/hcu4/hcu4.c
@@ -134,7 +134,7 @@ u32 hcu_get_slot(void)
  */
 u32 get_serial_number(void)
 {
-	u32 serial = in_be32((u32 *)CFG_FLASH_BASE);
+	u32 serial = in_be32((u32 *)CONFIG_SYS_FLASH_BASE);
 
 	if (serial == 0xffffffff)
 		return 0;
diff --git a/board/netstal/hcu4/u-boot.lds b/board/netstal/hcu4/u-boot.lds
index 3bcfea2a8..d9abcd674 100644
--- a/board/netstal/hcu4/u-boot.lds
+++ b/board/netstal/hcu4/u-boot.lds
@@ -62,7 +62,7 @@ SECTIONS
     cpu/ppc4xx/start.o	(.text)
 
 /*    . = env_offset;*/
-/*    common/environment.o(.text)*/
+/*    common/env_embedded.o(.text)*/
 
     *(.text)
     *(.fixup)
@@ -133,6 +133,7 @@ SECTIONS
    *(.dynbss)
    *(.bss)
    *(COMMON)
+   . = ALIGN(4);
   }
   _end = . ;
   PROVIDE (end = .);
diff --git a/board/netstal/hcu5/README.txt b/board/netstal/hcu5/README.txt
index c205108ff..f64987637 100644
--- a/board/netstal/hcu5/README.txt
+++ b/board/netstal/hcu5/README.txt
@@ -33,7 +33,7 @@ vector and start running.
 On-Chip Memory
 --------------
 
-0xe0010000- 0xe0013fff   CFG_OCM_BASE
+0xe0010000- 0xe0013fff   CONFIG_SYS_OCM_BASE
 The 440EPx includes a 16K on-chip memory that can be placed however
 software chooses.
 
@@ -149,10 +149,10 @@ From now on our copy is in RAM and we will run from there,
 	setup bd flash info
 	cpu_init_r: (cpu/ppc4xx/cpu_init.c)
 	    peripheral chip select in using defines like
-	    CFG_EBC_PB0A, CFG_EBC_PB0C from hcu5.h
+	    CONFIG_SYS_EBC_PB0A, CONFIG_SYS_EBC_PB0C from hcu5.h
 	mem_malloc_init
 	malloc_bin_reloc
-	spi_init (r or f)??? (CFG_ENV_IS_IN_EEPROM)
+	spi_init (r or f)??? (CONFIG_ENV_IS_IN_EEPROM)
 	env_relocated
 	misc_init_r(bd): (board/netstal/hcu5.c)
 	    ethaddr mit serial number ergänzen
@@ -168,4 +168,4 @@ include/ppc440.h
 Drivers for serial etc are found under drivers/
 
 Don't ask question if you did not look at the README !!
-Most CFG_* and CONFIG_* switches are mentioned/explained there.
+Most CONFIG_SYS_* and CONFIG_* switches are mentioned/explained there.
diff --git a/board/netstal/hcu5/hcu5.c b/board/netstal/hcu5/hcu5.c
index 4ecdb25da..6f4ec296c 100644
--- a/board/netstal/hcu5/hcu5.c
+++ b/board/netstal/hcu5/hcu5.c
@@ -26,7 +26,7 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
-extern flash_info_t flash_info[CFG_MAX_FLASH_BANKS];
+extern flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];
 
 #undef BOOTSTRAP_OPTION_A_ACTIVE
 
@@ -40,9 +40,9 @@ extern flash_info_t flash_info[CFG_MAX_FLASH_BANKS];
 #define SDR0_ECID2		0x0082
 #define SDR0_ECID3		0x0083
 
-#define SYS_IO_ADDRESS			(CFG_CS_2 + 0x00e00000)
-#define SYS_SLOT_ADDRESS		(CFG_CPLD + 0x00400000)
-#define HCU_DIGITAL_IO_REGISTER	(CFG_CPLD + 0x0500000)
+#define SYS_IO_ADDRESS			(CONFIG_SYS_CS_2 + 0x00e00000)
+#define SYS_SLOT_ADDRESS		(CONFIG_SYS_CPLD + 0x00400000)
+#define HCU_DIGITAL_IO_REGISTER	(CONFIG_SYS_CPLD + 0x0500000)
 #define HCU_SW_INSTALL_REQUESTED	0x10
 
 /*
@@ -212,7 +212,7 @@ void hcu_led_set(u32 value)
  */
 u32 get_serial_number(void)
 {
-	u32 *serial = (u32 *)CFG_FLASH_BASE;
+	u32 *serial = (u32 *)CONFIG_SYS_FLASH_BASE;
 
 	if (in_be32(serial) == 0xffffffff)
 		return 0;
@@ -240,18 +240,18 @@ int misc_init_r(void)
 	unsigned long usb2phy0cr, usb2h0cr = 0;
 	unsigned long sdr0_pfc1;
 
-#ifdef CFG_ENV_IS_IN_FLASH
+#ifdef CONFIG_ENV_IS_IN_FLASH
 	/* Monitor protection ON by default */
 	(void)flash_protect(FLAG_PROTECT_SET,
-			    -CFG_MONITOR_LEN,
+			    -CONFIG_SYS_MONITOR_LEN,
 			    0xffffffff,
 			    &flash_info[0]);
 
-#ifdef CFG_ENV_ADDR_REDUND
+#ifdef CONFIG_ENV_ADDR_REDUND
 	/* Env protection ON by default */
 	(void)flash_protect(FLAG_PROTECT_SET,
-			    CFG_ENV_ADDR_REDUND,
-			    CFG_ENV_ADDR_REDUND + 2*CFG_ENV_SECT_SIZE - 1,
+			    CONFIG_ENV_ADDR_REDUND,
+			    CONFIG_ENV_ADDR_REDUND + 2*CONFIG_ENV_SECT_SIZE - 1,
 			    &flash_info[0]);
 #endif
 #endif
@@ -399,18 +399,18 @@ void pci_target_init(struct pci_controller *hose)
 	 */
 	/* PMM0 Mask/Attribute - disabled b4 setting */
 	out32r(PCIX0_PMM0MA, 0x00000000);
-	out32r(PCIX0_PMM0LA, CFG_PCI_MEMBASE);	/* PMM0 Local Address */
+	out32r(PCIX0_PMM0LA, CONFIG_SYS_PCI_MEMBASE);	/* PMM0 Local Address */
 	/* PMM0 PCI Low Address */
-	out32r(PCIX0_PMM0PCILA, CFG_PCI_MEMBASE);
+	out32r(PCIX0_PMM0PCILA, CONFIG_SYS_PCI_MEMBASE);
 	out32r(PCIX0_PMM0PCIHA, 0x00000000);	/* PMM0 PCI High Address */
 	/* 512M + No prefetching, and enable region */
 	out32r(PCIX0_PMM0MA, 0xE0000001);
 
 	/* PMM0 Mask/Attribute - disabled b4 setting */
 	out32r(PCIX0_PMM1MA, 0x00000000);
-	out32r(PCIX0_PMM1LA, CFG_PCI_MEMBASE2);	/* PMM0 Local Address */
+	out32r(PCIX0_PMM1LA, CONFIG_SYS_PCI_MEMBASE2);	/* PMM0 Local Address */
 	/* PMM0 PCI Low Address */
-	out32r(PCIX0_PMM1PCILA, CFG_PCI_MEMBASE2);
+	out32r(PCIX0_PMM1PCILA, CONFIG_SYS_PCI_MEMBASE2);
 	out32r(PCIX0_PMM1PCIHA, 0x00000000);	/* PMM0 PCI High Address */
 	/* 512M + No prefetching, and enable region */
 	out32r(PCIX0_PMM1MA, 0xE0000001);
@@ -426,8 +426,8 @@ void pci_target_init(struct pci_controller *hose)
 
 	/* Program the board's subsystem id/vendor id */
 	pci_write_config_word(0, PCI_SUBSYSTEM_VENDOR_ID,
-			      CFG_PCI_SUBSYS_VENDORID);
-	pci_write_config_word(0, PCI_SUBSYSTEM_ID, CFG_PCI_SUBSYS_ID);
+			      CONFIG_SYS_PCI_SUBSYS_VENDORID);
+	pci_write_config_word(0, PCI_SUBSYSTEM_ID, CONFIG_SYS_PCI_SUBSYS_ID);
 
 	/* Configure command register as bus master */
 	pci_write_config_word(0, PCI_COMMAND, PCI_COMMAND_MASTER);
diff --git a/board/netstal/hcu5/init.S b/board/netstal/hcu5/init.S
index d73c861e6..05b5e389c 100644
--- a/board/netstal/hcu5/init.S
+++ b/board/netstal/hcu5/init.S
@@ -42,7 +42,7 @@ tlbtab:
 	/* TLB#0: vxWorks needs this entry for the Machine Check interrupt, */
 	tlbentry( 0x40000000, SZ_256M, 0, 0, AC_R|AC_W|AC_X|SA_G|SA_I )
 	/* TLB#1: TLB-entry for DDR SDRAM (Up to 2GB) */
-	tlbentry( CFG_SDRAM_BASE, SZ_256M, CFG_SDRAM_BASE, 0,
+	tlbentry( CONFIG_SYS_SDRAM_BASE, SZ_256M, CONFIG_SYS_SDRAM_BASE, 0,
 		AC_R|AC_W|AC_X|SA_G|SA_I )
 
 	/* TLB#2: TLB-entry for EBC */
@@ -53,7 +53,7 @@ tlbtab:
 	 * off to use the speed up boot process. It is patched after relocation
 	 * to enable SA_I
 	 */
-	tlbentry( CFG_BOOT_BASE_ADDR, SZ_1M, CFG_BOOT_BASE_ADDR, 1,
+	tlbentry( CONFIG_SYS_BOOT_BASE_ADDR, SZ_1M, CONFIG_SYS_BOOT_BASE_ADDR, 1,
 		AC_R|AC_W|AC_X|SA_G)
 
 	/*
@@ -63,13 +63,13 @@ tlbtab:
 	 */
 
 	/* TLB#4: */
-	tlbentry( CFG_PCI_MEMBASE1, SZ_256M, CFG_PCI_MEMBASE1, 1,
+	tlbentry( CONFIG_SYS_PCI_MEMBASE1, SZ_256M, CONFIG_SYS_PCI_MEMBASE1, 1,
 		AC_R|AC_W|SA_G|SA_I )
 	/* TLB#5: */
-	tlbentry( CFG_PCI_MEMBASE2, SZ_256M, CFG_PCI_MEMBASE2, 1,
+	tlbentry( CONFIG_SYS_PCI_MEMBASE2, SZ_256M, CONFIG_SYS_PCI_MEMBASE2, 1,
 		AC_R|AC_W|SA_G|SA_I )
 	/* TLB#6: */
-	tlbentry( CFG_PCI_MEMBASE3, SZ_256M, CFG_PCI_MEMBASE3, 1,
+	tlbentry( CONFIG_SYS_PCI_MEMBASE3, SZ_256M, CONFIG_SYS_PCI_MEMBASE3, 1,
 		AC_R|AC_W|SA_G|SA_I )
 
 	/* TLB-entry for Internal Registers & OCM */
@@ -87,20 +87,20 @@ tlbtab:
 
 	/*		CAN */
 	/* TLB#10: */
-	tlbentry( CFG_CS_1, SZ_1K, CFG_CS_1, 1, AC_R|AC_W|AC_X|SA_G|SA_I )
+	tlbentry( CONFIG_SYS_CS_1, SZ_1K, CONFIG_SYS_CS_1, 1, AC_R|AC_W|AC_X|SA_G|SA_I )
 
 	/* TLB#11:  CPLD and IMC-Standard 32 MB */
-	tlbentry( CFG_CS_2, SZ_16M, CFG_CS_2, 1, AC_R|AC_W|AC_X|SA_G|SA_I )
+	tlbentry( CONFIG_SYS_CS_2, SZ_16M, CONFIG_SYS_CS_2, 1, AC_R|AC_W|AC_X|SA_G|SA_I )
 
 	/* TLB#12: */
-	tlbentry( CFG_CS_2 + 0x1000000, SZ_16M, CFG_CS_2 + 0x1000000, 1,
+	tlbentry( CONFIG_SYS_CS_2 + 0x1000000, SZ_16M, CONFIG_SYS_CS_2 + 0x1000000, 1,
 		AC_R|AC_W|AC_X|SA_G|SA_I )
 
 	 /*		IMC-Fast 32 MB */
 	/* TLB#13: */
-	tlbentry( CFG_CS_3, SZ_16M, CFG_CS_3, 1, AC_R|AC_W|AC_X|SA_G|SA_I )
+	tlbentry( CONFIG_SYS_CS_3, SZ_16M, CONFIG_SYS_CS_3, 1, AC_R|AC_W|AC_X|SA_G|SA_I )
 	/* TLB#14: */
-	tlbentry( CFG_CS_3 + 0x1000000, SZ_16M, CFG_CS_3, 1,
+	tlbentry( CONFIG_SYS_CS_3 + 0x1000000, SZ_16M, CONFIG_SYS_CS_3, 1,
 		AC_R|AC_W|AC_X|SA_G|SA_I )
 
 	tlbtab_end
diff --git a/board/netstal/hcu5/sdram.c b/board/netstal/hcu5/sdram.c
index 66a958c78..f59bd7d18 100644
--- a/board/netstal/hcu5/sdram.c
+++ b/board/netstal/hcu5/sdram.c
@@ -122,7 +122,7 @@ void sdram_panic(const char *reason)
 }
 
 #ifdef CONFIG_DDR_ECC
-static void blank_string(int size)
+void blank_string(int size)
 {
 	int i;
 
@@ -263,20 +263,20 @@ phys_size_t initdram (int board_type)
 	/*
 	 * Program tlb entries for this size (dynamic)
 	 */
-	remove_tlb(CFG_SDRAM_BASE, 256 << 20);
+	remove_tlb(CONFIG_SYS_SDRAM_BASE, 256 << 20);
 	program_tlb(0, 0, dram_size, TLB_WORD2_W_ENABLE | TLB_WORD2_I_ENABLE);
 
 	/*
 	 * Setup 2nd TLB with same physical address but different virtual
 	 * address with cache enabled. This is done for fast ECC generation.
 	 */
-	program_tlb(0, CFG_DDR_CACHED_ADDR, dram_size, 0);
+	program_tlb(0, CONFIG_SYS_DDR_CACHED_ADDR, dram_size, 0);
 
 #ifdef CONFIG_DDR_ECC
 	/*
 	 * If ECC is enabled, initialize the parity bits.
 	 */
-	program_ecc(CFG_DDR_CACHED_ADDR, dram_size);
+	program_ecc(CONFIG_SYS_DDR_CACHED_ADDR, dram_size);
 #endif
 
 	return (dram_size);
diff --git a/board/netstal/hcu5/u-boot.lds b/board/netstal/hcu5/u-boot.lds
index c72e5ba69..c3009bb70 100644
--- a/board/netstal/hcu5/u-boot.lds
+++ b/board/netstal/hcu5/u-boot.lds
@@ -134,9 +134,10 @@ SECTIONS
    *(.dynbss)
    *(.bss)
    *(COMMON)
+   . = ALIGN(4);
   }
 
-  ppcenv_assert = ASSERT(. < 0xFFFFB000, ".bss section too big, overlaps .ppcenv section. Please update your confguration: CFG_MONITOR_BASE, CFG_MONITOR_LEN and TEXT_BASE may need to be modified.");
+  ppcenv_assert = ASSERT(. < 0xFFFFB000, ".bss section too big, overlaps .ppcenv section. Please update your confguration: CONFIG_SYS_MONITOR_BASE, CONFIG_SYS_MONITOR_LEN and TEXT_BASE may need to be modified.");
 
   _end = . ;
   PROVIDE (end = .);
diff --git a/board/netstal/mcu25/mcu25.c b/board/netstal/mcu25/mcu25.c
index ed171bfeb..66ed95fb9 100644
--- a/board/netstal/mcu25/mcu25.c
+++ b/board/netstal/mcu25/mcu25.c
@@ -74,9 +74,9 @@ int board_early_init_f (void)
 	mtdcr(cntrl1, CPC0_CR1_VALUE);
 	mtdcr(ecr, 0x60606000);
 	mtdcr(CPC0_EIRR, 0x7C000000);
-	out32(GPIO0_OR,		CFG_GPIO0_OR );
-	out32(GPIO0_TCR,	CFG_GPIO0_TCR);
-	out32(GPIO0_ODR,	CFG_GPIO0_ODR);
+	out32(GPIO0_OR,		CONFIG_SYS_GPIO0_OR );
+	out32(GPIO0_TCR,	CONFIG_SYS_GPIO0_TCR);
+	out32(GPIO0_ODR,	CONFIG_SYS_GPIO0_ODR);
 	mtspr(ccr0,      0x00700000);
 
 	return 0;
@@ -141,7 +141,7 @@ u32 hcu_get_slot(void)
  */
 u32 get_serial_number(void)
 {
-	u32 serial = in_be32((u32 *)CFG_FLASH_BASE);
+	u32 serial = in_be32((u32 *)CONFIG_SYS_FLASH_BASE);
 
 	if (serial == 0xffffffff)
 		return 0;
diff --git a/board/netstal/mcu25/u-boot.lds b/board/netstal/mcu25/u-boot.lds
index 740bc9c97..a00f570f3 100644
--- a/board/netstal/mcu25/u-boot.lds
+++ b/board/netstal/mcu25/u-boot.lds
@@ -62,7 +62,7 @@ SECTIONS
     cpu/ppc4xx/start.o	(.text)
 
 /*    . = env_offset;*/
-/*    common/environment.o(.text)*/
+/*    common/env_embedded.o(.text)*/
 
     *(.text)
     *(.fixup)
@@ -133,6 +133,7 @@ SECTIONS
    *(.dynbss)
    *(.bss)
    *(COMMON)
+   . = ALIGN(4);
   }
   _end = . ;
   PROVIDE (end = .);
diff --git a/board/netstar/eeprom.c b/board/netstar/eeprom.c
index 0de594b65..5806128cf 100644
--- a/board/netstar/eeprom.c
+++ b/board/netstar/eeprom.c
@@ -26,6 +26,7 @@
 
 #include <common.h>
 #include <exports.h>
+#include <timestamp.h>
 #include "../drivers/net/smc91111.h"
 
 #define SMC_BASE_ADDRESS CONFIG_SMC91111_BASE
@@ -173,7 +174,7 @@ int eeprom(int argc, char *argv[])
 	/* Print help message */
 	if (argv[1][1] == 'h') {
 		printf("VoiceBlue EEPROM writer\n");
-		printf("Built: %s at %s\n", __DATE__ , __TIME__ );
+		printf("Built: %s at %s\n", U_BOOT_DATE, U_BOOT_TIME);
 		printf("Usage:\n\t<mac_address> [<element_1>] [<...>]\n");
 		return 0;
 	}
diff --git a/board/netstar/eeprom.lds b/board/netstar/eeprom.lds
index 89b0a8209..f3be320df 100644
--- a/board/netstar/eeprom.lds
+++ b/board/netstar/eeprom.lds
@@ -46,6 +46,6 @@ SECTIONS
 
 	. = ALIGN(4);
 	__bss_start = .;
-	.bss (NOLOAD) : { *(.bss) }
+	.bss (NOLOAD) : { *(.bss) . = ALIGN(4); }
 	_end = .;
 }
diff --git a/board/netstar/flash.c b/board/netstar/flash.c
index 692c41678..e9eca35e0 100644
--- a/board/netstar/flash.c
+++ b/board/netstar/flash.c
@@ -33,11 +33,11 @@
 
 #include "crcek.h"
 
-#if (CFG_MAX_FLASH_BANKS > 1)
+#if (CONFIG_SYS_MAX_FLASH_BANKS > 1)
 #error There is always only _one_ flash chip
 #endif
 
-flash_info_t flash_info[CFG_MAX_FLASH_BANKS];
+flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];
 
 #define CMD_READ_ARRAY		0x000000f0
 #define CMD_UNLOCK1		0x000000aa
@@ -47,8 +47,8 @@ flash_info_t flash_info[CFG_MAX_FLASH_BANKS];
 #define CMD_PROGRAM		0x000000a0
 #define CMD_UNLOCK_BYPASS	0x00000020
 
-#define MEM_FLASH_ADDR1		(*(volatile u16 *)(CFG_FLASH_BASE + (0x00000555 << 1)))
-#define MEM_FLASH_ADDR2		(*(volatile u16 *)(CFG_FLASH_BASE + (0x000002aa << 1)))
+#define MEM_FLASH_ADDR1		(*(volatile u16 *)(CONFIG_SYS_FLASH_BASE + (0x00000555 << 1)))
+#define MEM_FLASH_ADDR2		(*(volatile u16 *)(CONFIG_SYS_FLASH_BASE + (0x000002aa << 1)))
 
 #define BIT_ERASE_DONE		0x00000080
 #define BIT_RDY_MASK		0x00000080
@@ -65,27 +65,27 @@ ulong flash_init(void)
 	flash_info[0].flash_id = (AMD_MANUFACT & FLASH_VENDMASK) |
 				 (AMD_ID_LV800B & FLASH_TYPEMASK);
 	flash_info[0].size = PHYS_FLASH_1_SIZE;
-	flash_info[0].sector_count = CFG_MAX_FLASH_SECT;
-	memset(flash_info[0].protect, 0, CFG_MAX_FLASH_SECT);
+	flash_info[0].sector_count = CONFIG_SYS_MAX_FLASH_SECT;
+	memset(flash_info[0].protect, 0, CONFIG_SYS_MAX_FLASH_SECT);
 
 	for (i = 0; i < flash_info[0].sector_count; i++) {
 		switch (i) {
 		case 0: /* 16kB */
-			flash_info[0].start[0] = CFG_FLASH_BASE;
+			flash_info[0].start[0] = CONFIG_SYS_FLASH_BASE;
 			break;
 		case 1: /* 8kB */
-			flash_info[0].start[1] = CFG_FLASH_BASE + 0x4000;
+			flash_info[0].start[1] = CONFIG_SYS_FLASH_BASE + 0x4000;
 			break;
 		case 2: /* 8kB */
-			flash_info[0].start[2] = CFG_FLASH_BASE + 0x4000 +
+			flash_info[0].start[2] = CONFIG_SYS_FLASH_BASE + 0x4000 +
 						 0x2000;
 			break;
 		case 3: /* 32 KB */
-			flash_info[0].start[3] = CFG_FLASH_BASE + 0x4000 +
+			flash_info[0].start[3] = CONFIG_SYS_FLASH_BASE + 0x4000 +
 						 2 * 0x2000;
 			break;
 		case 4:
-			flash_info[0].start[4] = CFG_FLASH_BASE + 0x4000 +
+			flash_info[0].start[4] = CONFIG_SYS_FLASH_BASE + 0x4000 +
 						 2 * 0x2000 + 0x8000;
 			break;
 		default: /* 64kB */
@@ -196,7 +196,7 @@ int flash_erase(flash_info_t *info, int s_first, int s_last)
 				result = *addr;
 
 				/* check timeout */
-				if (get_timer_masked() > CFG_FLASH_ERASE_TOUT) {
+				if (get_timer_masked() > CONFIG_SYS_FLASH_ERASE_TOUT) {
 					MEM_FLASH_ADDR1 = CMD_READ_ARRAY;
 					rc = ERR_TIMOUT;
 					break;
@@ -254,7 +254,7 @@ static int write_hword(flash_info_t *info, ulong dest, ushort data)
 		result = *addr;
 
 		/* check timeout */
-		if (get_timer_masked () > CFG_FLASH_ERASE_TOUT) {
+		if (get_timer_masked () > CONFIG_SYS_FLASH_ERASE_TOUT) {
 			rc = ERR_TIMOUT;
 			break;
 		}
diff --git a/board/netstar/u-boot.lds b/board/netstar/u-boot.lds
index 39646e6e8..5823f62f7 100644
--- a/board/netstar/u-boot.lds
+++ b/board/netstar/u-boot.lds
@@ -50,6 +50,6 @@ SECTIONS
 
 	. = ALIGN(4);
 	__bss_start = .;
-	.bss (NOLOAD) : { *(.bss) }
+	.bss (NOLOAD) : { *(.bss) . = ALIGN(4); }
 	_end = .;
 }
diff --git a/board/netta/codec.c b/board/netta/codec.c
index 01ab14bc5..844aa184a 100644
--- a/board/netta/codec.c
+++ b/board/netta/codec.c
@@ -339,9 +339,9 @@
 
 /************************************************/
 
-#define PORTB		(((volatile immap_t *)CFG_IMMR)->im_cpm.cp_pbdat)
-#define PORTC		(((volatile immap_t *)CFG_IMMR)->im_ioport.iop_pcdat)
-#define PORTD		(((volatile immap_t *)CFG_IMMR)->im_ioport.iop_pddat)
+#define PORTB		(((volatile immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pbdat)
+#define PORTC		(((volatile immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pcdat)
+#define PORTD		(((volatile immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pddat)
 
 #define _PORTD_SET(mask, state) \
 	do { \
diff --git a/board/netta/dsp.c b/board/netta/dsp.c
index 3739e16d6..cd576476e 100644
--- a/board/netta/dsp.c
+++ b/board/netta/dsp.c
@@ -95,7 +95,7 @@ static volatile u32 *ti6711_delay = &dummy_delay;
 
 static inline void dsp_go_slow(void)
 {
-	volatile memctl8xx_t *memctl = &((immap_t *)CFG_IMMR)->im_memctl;
+	volatile memctl8xx_t *memctl = &((immap_t *)CONFIG_SYS_IMMR)->im_memctl;
 #if defined(CONFIG_NETTA_6412)
 	memctl->memc_or6 |= OR_SCY_15_CLK | OR_TRLX;
 #else
@@ -108,7 +108,7 @@ static inline void dsp_go_slow(void)
 
 static inline void dsp_go_fast(void)
 {
-	volatile memctl8xx_t *memctl = &((immap_t *)CFG_IMMR)->im_memctl;
+	volatile memctl8xx_t *memctl = &((immap_t *)CONFIG_SYS_IMMR)->im_memctl;
 #if defined(CONFIG_NETTA_6412)
 	memctl->memc_or6 = (memctl->memc_or6 & ~(OR_SCY_15_CLK | OR_TRLX)) | OR_SCY_0_CLK;
 #else
@@ -148,14 +148,14 @@ static inline void dsp_write_hpic(u16 val)
 static inline void dsp_reset(void)
 {
 #if defined(CONFIG_NETTA_6412)
-	((volatile immap_t *)CFG_IMMR)->im_ioport.iop_pddat &= ~(1 << (15 - 15));
+	((volatile immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pddat &= ~(1 << (15 - 15));
 	udelay(500);
-	((volatile immap_t *)CFG_IMMR)->im_ioport.iop_pddat |=  (1 << (15 - 15));
+	((volatile immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pddat |=  (1 << (15 - 15));
 	udelay(500);
 #else
-	((volatile immap_t *)CFG_IMMR)->im_ioport.iop_pddat &= ~(1 << (15 - 7));
+	((volatile immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pddat &= ~(1 << (15 - 7));
 	udelay(250);
-	((volatile immap_t *)CFG_IMMR)->im_ioport.iop_pddat |=  (1 << (15 - 7));
+	((volatile immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pddat |=  (1 << (15 - 7));
 	udelay(250);
 #endif
 }
diff --git a/board/netta/flash.c b/board/netta/flash.c
index ca3e061c2..45e6b3010 100644
--- a/board/netta/flash.c
+++ b/board/netta/flash.c
@@ -24,7 +24,7 @@
 #include <common.h>
 #include <mpc8xx.h>
 
-flash_info_t flash_info[CFG_MAX_FLASH_BANKS];	/* info for FLASH chips    */
+flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];	/* info for FLASH chips    */
 
 /*-----------------------------------------------------------------------
  * Functions
@@ -38,13 +38,13 @@ static void flash_get_offsets(ulong base, flash_info_t * info);
 
 unsigned long flash_init(void)
 {
-	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
 	volatile memctl8xx_t *memctl = &immap->im_memctl;
 	unsigned long size;
 	int i;
 
 	/* Init: no FLASHes known */
-	for (i = 0; i < CFG_MAX_FLASH_BANKS; ++i)
+	for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; ++i)
 		flash_info[i].flash_id = FLASH_UNKNOWN;
 
 	size = flash_get_size((vu_long *) FLASH_BASE0_PRELIM, &flash_info[0]);
@@ -54,28 +54,28 @@ unsigned long flash_init(void)
 	}
 
 	/* Remap FLASH according to real size */
-	memctl->memc_or0 = CFG_OR_TIMING_FLASH | (-size & 0xFFFF8000);
-	memctl->memc_br0 = (CFG_FLASH_BASE & BR_BA_MSK) | (memctl->memc_br0 & ~(BR_BA_MSK));
+	memctl->memc_or0 = CONFIG_SYS_OR_TIMING_FLASH | (-size & 0xFFFF8000);
+	memctl->memc_br0 = (CONFIG_SYS_FLASH_BASE & BR_BA_MSK) | (memctl->memc_br0 & ~(BR_BA_MSK));
 
 	/* Re-do sizing to get full correct info */
-	size = flash_get_size((vu_long *) CFG_FLASH_BASE, &flash_info[0]);
+	size = flash_get_size((vu_long *) CONFIG_SYS_FLASH_BASE, &flash_info[0]);
 
-	flash_get_offsets(CFG_FLASH_BASE, &flash_info[0]);
+	flash_get_offsets(CONFIG_SYS_FLASH_BASE, &flash_info[0]);
 
 	/* monitor protection ON by default */
 	flash_protect(FLAG_PROTECT_SET,
-			CFG_FLASH_BASE, CFG_FLASH_BASE + monitor_flash_len - 1,
+			CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE + monitor_flash_len - 1,
 			&flash_info[0]);
 
 	flash_protect ( FLAG_PROTECT_SET,
-			CFG_ENV_ADDR,
-			CFG_ENV_ADDR + CFG_ENV_SIZE - 1,
+			CONFIG_ENV_ADDR,
+			CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1,
 			&flash_info[0]);
 
-#ifdef CFG_ENV_ADDR_REDUND
+#ifdef CONFIG_ENV_ADDR_REDUND
 	flash_protect ( FLAG_PROTECT_SET,
-			CFG_ENV_ADDR_REDUND,
-			CFG_ENV_ADDR_REDUND + CFG_ENV_SIZE_REDUND - 1,
+			CONFIG_ENV_ADDR_REDUND,
+			CONFIG_ENV_ADDR_REDUND + CONFIG_ENV_SIZE_REDUND - 1,
 			&flash_info[0]);
 #endif
 
@@ -427,7 +427,7 @@ int flash_erase(flash_info_t * info, int s_first, int s_last)
 	last = start;
 	addr = (vu_char *) (info->start[l_sect]);
 	while ((addr[0] & 0x80) != 0x80) {
-		if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+		if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
 			printf("Timeout\n");
 			return 1;
 		}
@@ -500,7 +500,7 @@ static int write_byte(flash_info_t * info, ulong dest, uchar data)
 	/* data polling for D7 */
 	start = get_timer(0);
 	while ((*((vu_char *) dest) & 0x80) != (data & 0x80)) {
-		if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+		if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
 			return (1);
 		}
 	}
diff --git a/board/netta/netta.c b/board/netta/netta.c
index bc31386ec..02fd94cc2 100644
--- a/board/netta/netta.c
+++ b/board/netta/netta.c
@@ -289,7 +289,7 @@ const uint sdram_table[0x40] = {
 #define MAR_SDRAM_INIT		((CAS_LATENCY << 6) | 0x00000008LU)
 
 /* 8 */
-#define CFG_MAMR	((CFG_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
+#define CONFIG_SYS_MAMR	((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
 			 MAMR_AMA_TYPE_0 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A11 |	\
 			 MAMR_RLFA_1X	 | MAMR_WLFA_1X	   | MAMR_TLFA_4X)
 
@@ -339,7 +339,7 @@ void check_ram(unsigned int addr, unsigned int size)
 
 phys_size_t initdram(int board_type)
 {
-	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
 	volatile memctl8xx_t *memctl = &immap->im_memctl;
 	long int size;
 
@@ -355,10 +355,10 @@ phys_size_t initdram(int board_type)
 	/*
 	 * Map controller bank 3 to the SDRAM bank at preliminary address.
 	 */
-	memctl->memc_or3 = CFG_OR3_PRELIM;
-	memctl->memc_br3 = CFG_BR3_PRELIM;
+	memctl->memc_or3 = CONFIG_SYS_OR3_PRELIM;
+	memctl->memc_br3 = CONFIG_SYS_BR3_PRELIM;
 
-	memctl->memc_mbmr = CFG_MAMR & ~MAMR_PTAE;	/* no refresh yet */
+	memctl->memc_mbmr = CONFIG_SYS_MAMR & ~MAMR_PTAE;	/* no refresh yet */
 
 	udelay(200);
 
@@ -505,7 +505,7 @@ int last_stage_init(void)
 
 int board_early_init_f(void)
 {
-	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
 	volatile iop8xx_t *ioport = &immap->im_ioport;
 	volatile cpm8xx_t *cpm = &immap->im_cpm;
 	volatile memctl8xx_t *memctl = &immap->im_memctl;
@@ -560,11 +560,11 @@ int board_early_init_f(void)
 #include <linux/mtd/nand_legacy.h>
 
 extern ulong nand_probe(ulong physadr);
-extern struct nand_chip nand_dev_desc[CFG_MAX_NAND_DEVICE];
+extern struct nand_chip nand_dev_desc[CONFIG_SYS_MAX_NAND_DEVICE];
 
 void nand_init(void)
 {
-	unsigned long totlen = nand_probe(CFG_NAND_BASE);
+	unsigned long totlen = nand_probe(CONFIG_SYS_NAND_BASE);
 
 	printf ("%4lu MB\n", totlen >> 20);
 }
diff --git a/board/netta/pcmcia.c b/board/netta/pcmcia.c
index 66e6e511e..ed58f2c85 100644
--- a/board/netta/pcmcia.c
+++ b/board/netta/pcmcia.c
@@ -33,7 +33,7 @@ static const unsigned short vppd_masks[2] = { _BW(14), _BW(15) };
 
 static void cfg_vppd(int no)
 {
-	volatile immap_t *immap = (immap_t *)CFG_IMMR;
+	volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR;
 	unsigned short mask;
 
 	if ((unsigned int)no >= sizeof(vppd_masks)/sizeof(vppd_masks[0]))
@@ -48,7 +48,7 @@ static void cfg_vppd(int no)
 
 static void set_vppd(int no, int what)
 {
-	volatile immap_t *immap = (immap_t *)CFG_IMMR;
+	volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR;
 	unsigned short mask;
 
 	if ((unsigned int)no >= sizeof(vppd_masks)/sizeof(vppd_masks[0]))
@@ -66,7 +66,7 @@ static const unsigned short vccd_masks[2] = { _BW(10), _BW(6) };
 
 static void cfg_vccd(int no)
 {
-	volatile immap_t *immap = (immap_t *)CFG_IMMR;
+	volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR;
 	unsigned short mask;
 
 	if ((unsigned int)no >= sizeof(vccd_masks)/sizeof(vccd_masks[0]))
@@ -81,7 +81,7 @@ static void cfg_vccd(int no)
 
 static void set_vccd(int no, int what)
 {
-	volatile immap_t *immap = (immap_t *)CFG_IMMR;
+	volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR;
 	unsigned short mask;
 
 	if ((unsigned int)no >= sizeof(vccd_masks)/sizeof(vccd_masks[0]))
@@ -99,7 +99,7 @@ static const unsigned short oc_mask = _BW(8);
 
 static void cfg_oc(void)
 {
-	volatile immap_t *immap = (immap_t *)CFG_IMMR;
+	volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR;
 	unsigned short mask = oc_mask;
 
 	immap->im_ioport.iop_pcdir &= ~mask;
@@ -110,7 +110,7 @@ static void cfg_oc(void)
 
 static int get_oc(void)
 {
-	volatile immap_t *immap = (immap_t *)CFG_IMMR;
+	volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR;
 	unsigned short mask = oc_mask;
 	int what;
 
@@ -122,7 +122,7 @@ static const unsigned short shdn_mask = _BW(12);
 
 static void cfg_shdn(void)
 {
-	volatile immap_t *immap = (immap_t *)CFG_IMMR;
+	volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR;
 	unsigned short mask;
 
 	mask = shdn_mask;
@@ -134,7 +134,7 @@ static void cfg_shdn(void)
 
 static void set_shdn(int what)
 {
-	volatile immap_t *immap = (immap_t *)CFG_IMMR;
+	volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR;
 	unsigned short mask;
 
 	mask = shdn_mask;
@@ -150,8 +150,8 @@ static void cfg_ports (void)
 	volatile immap_t	*immap;
 	volatile cpm8xx_t	*cp;
 
-	immap = (immap_t *)CFG_IMMR;
-	cp    = (cpm8xx_t *)(&(((immap_t *)CFG_IMMR)->im_cpm));
+	immap = (immap_t *)CONFIG_SYS_IMMR;
+	cp    = (cpm8xx_t *)(&(((immap_t *)CONFIG_SYS_IMMR)->im_cpm));
 
 
 	cfg_vppd(0); cfg_vppd(1);	/* VPPD0,VPPD1 VAVPP => Hi-Z */
@@ -184,10 +184,10 @@ int pcmcia_hardware_enable(int slot)
 
 	udelay(10000);
 
-	immap = (immap_t *)CFG_IMMR;
-	sysp  = (sysconf8xx_t *)(&(((immap_t *)CFG_IMMR)->im_siu_conf));
-	pcmp  = (pcmconf8xx_t *)(&(((immap_t *)CFG_IMMR)->im_pcmcia));
-	cp    = (cpm8xx_t *)(&(((immap_t *)CFG_IMMR)->im_cpm));
+	immap = (immap_t *)CONFIG_SYS_IMMR;
+	sysp  = (sysconf8xx_t *)(&(((immap_t *)CONFIG_SYS_IMMR)->im_siu_conf));
+	pcmp  = (pcmconf8xx_t *)(&(((immap_t *)CONFIG_SYS_IMMR)->im_pcmcia));
+	cp    = (cpm8xx_t *)(&(((immap_t *)CONFIG_SYS_IMMR)->im_cpm));
 
 	/* Configure Ports for TPS2211A PC-Card Power-Interface Switch */
 	cfg_ports ();
@@ -273,8 +273,8 @@ int pcmcia_hardware_disable(int slot)
 
 	debug ("hardware_disable: " PCMCIA_BOARD_MSG " Slot %c\n", 'A'+slot);
 
-	immap = (immap_t *)CFG_IMMR;
-	pcmp  = (pcmconf8xx_t *)(&(((immap_t *)CFG_IMMR)->im_pcmcia));
+	immap = (immap_t *)CONFIG_SYS_IMMR;
+	pcmp  = (pcmconf8xx_t *)(&(((immap_t *)CONFIG_SYS_IMMR)->im_pcmcia));
 
 	/* Configure PCMCIA General Control Register */
 	debug ("Disable PCMCIA buffers and assert RESET\n");
@@ -307,9 +307,9 @@ int pcmcia_voltage_set(int slot, int vcc, int vpp)
 			" Slot %c, Vcc=%d.%d, Vpp=%d.%d\n",
 	'A'+slot, vcc/10, vcc%10, vpp/10, vcc%10);
 
-	immap = (immap_t *)CFG_IMMR;
-	cp    = (cpm8xx_t *)(&(((immap_t *)CFG_IMMR)->im_cpm));
-	pcmp  = (pcmconf8xx_t *)(&(((immap_t *)CFG_IMMR)->im_pcmcia));
+	immap = (immap_t *)CONFIG_SYS_IMMR;
+	cp    = (cpm8xx_t *)(&(((immap_t *)CONFIG_SYS_IMMR)->im_cpm));
+	pcmp  = (pcmconf8xx_t *)(&(((immap_t *)CONFIG_SYS_IMMR)->im_pcmcia));
 	/*
 	* Disable PCMCIA buffers (isolate the interface)
 	* and assert RESET signal
diff --git a/board/netta/u-boot.lds b/board/netta/u-boot.lds
index f560189c0..4966f4d4d 100644
--- a/board/netta/u-boot.lds
+++ b/board/netta/u-boot.lds
@@ -63,7 +63,7 @@ SECTIONS
     lib_ppc/time.o		(.text)
 
     . = DEFINED(env_offset) ? env_offset : .;
-    common/environment.o	(.text)
+    common/env_embedded.o	(.text)
 
     *(.text)
     *(.fixup)
@@ -134,6 +134,7 @@ SECTIONS
    *(.dynbss)
    *(.bss)
    *(COMMON)
+   . = ALIGN(4);
   }
   _end = . ;
   PROVIDE (end = .);
diff --git a/board/netta/u-boot.lds.debug b/board/netta/u-boot.lds.debug
index 5bf1a6628..d47c4082a 100644
--- a/board/netta/u-boot.lds.debug
+++ b/board/netta/u-boot.lds.debug
@@ -61,7 +61,7 @@ SECTIONS
     lib_generic/crc32.o		(.text)
 
     . = env_offset;
-    common/environment.o(.text)
+    common/env_embedded.o(.text)
 
     *(.text)
     *(.fixup)
diff --git a/board/netta2/flash.c b/board/netta2/flash.c
index a1c87f513..b63f45951 100644
--- a/board/netta2/flash.c
+++ b/board/netta2/flash.c
@@ -24,7 +24,7 @@
 #include <common.h>
 #include <mpc8xx.h>
 
-flash_info_t flash_info[CFG_MAX_FLASH_BANKS];	/* info for FLASH chips    */
+flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];	/* info for FLASH chips    */
 
 /*-----------------------------------------------------------------------
  * Functions
@@ -38,13 +38,13 @@ static void flash_get_offsets(ulong base, flash_info_t * info);
 
 unsigned long flash_init(void)
 {
-	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
 	volatile memctl8xx_t *memctl = &immap->im_memctl;
 	unsigned long size;
 	int i;
 
 	/* Init: no FLASHes known */
-	for (i = 0; i < CFG_MAX_FLASH_BANKS; ++i)
+	for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; ++i)
 		flash_info[i].flash_id = FLASH_UNKNOWN;
 
 	size = flash_get_size((vu_long *) FLASH_BASE0_PRELIM, &flash_info[0]);
@@ -55,28 +55,28 @@ unsigned long flash_init(void)
 	}
 
 	/* Remap FLASH according to real size */
-	memctl->memc_or0 = CFG_OR_TIMING_FLASH | (-size & 0xFFFF8000);
-	memctl->memc_br0 = (CFG_FLASH_BASE & BR_BA_MSK) | (memctl->memc_br0 & ~(BR_BA_MSK));
+	memctl->memc_or0 = CONFIG_SYS_OR_TIMING_FLASH | (-size & 0xFFFF8000);
+	memctl->memc_br0 = (CONFIG_SYS_FLASH_BASE & BR_BA_MSK) | (memctl->memc_br0 & ~(BR_BA_MSK));
 
 	/* Re-do sizing to get full correct info */
-	size = flash_get_size((vu_long *) CFG_FLASH_BASE, &flash_info[0]);
+	size = flash_get_size((vu_long *) CONFIG_SYS_FLASH_BASE, &flash_info[0]);
 
-	flash_get_offsets(CFG_FLASH_BASE, &flash_info[0]);
+	flash_get_offsets(CONFIG_SYS_FLASH_BASE, &flash_info[0]);
 
 	/* monitor protection ON by default */
 	flash_protect(FLAG_PROTECT_SET,
-			CFG_FLASH_BASE, CFG_FLASH_BASE + monitor_flash_len - 1,
+			CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE + monitor_flash_len - 1,
 			&flash_info[0]);
 
 	flash_protect ( FLAG_PROTECT_SET,
-			CFG_ENV_ADDR,
-			CFG_ENV_ADDR + CFG_ENV_SIZE - 1,
+			CONFIG_ENV_ADDR,
+			CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1,
 			&flash_info[0]);
 
-#ifdef CFG_ENV_ADDR_REDUND
+#ifdef CONFIG_ENV_ADDR_REDUND
 	flash_protect ( FLAG_PROTECT_SET,
-			CFG_ENV_ADDR_REDUND,
-			CFG_ENV_ADDR_REDUND + CFG_ENV_SIZE_REDUND - 1,
+			CONFIG_ENV_ADDR_REDUND,
+			CONFIG_ENV_ADDR_REDUND + CONFIG_ENV_SIZE_REDUND - 1,
 			&flash_info[0]);
 #endif
 
@@ -425,7 +425,7 @@ int flash_erase(flash_info_t * info, int s_first, int s_last)
 	last = start;
 	addr = (vu_char *) (info->start[l_sect]);
 	while ((addr[0] & 0x80) != 0x80) {
-		if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+		if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
 			printf("Timeout\n");
 			return 1;
 		}
@@ -498,7 +498,7 @@ static int write_byte(flash_info_t * info, ulong dest, uchar data)
 	/* data polling for D7 */
 	start = get_timer(0);
 	while ((*((vu_char *) dest) & 0x80) != (data & 0x80)) {
-		if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+		if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
 			return (1);
 		}
 	}
diff --git a/board/netta2/netta2.c b/board/netta2/netta2.c
index a97c14cee..2ce33cfdd 100644
--- a/board/netta2/netta2.c
+++ b/board/netta2/netta2.c
@@ -354,7 +354,7 @@ static const uint nandcs_table[0x40] = {
 #define MAR_SDRAM_INIT		((CAS_LATENCY << 6) | 0x00000008LU)
 
 /* 8 */
-#define CFG_MAMR	((CFG_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
+#define CONFIG_SYS_MAMR	((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
 			 MAMR_AMA_TYPE_0 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A11 |	\
 			 MAMR_RLFA_1X	 | MAMR_WLFA_1X	   | MAMR_TLFA_4X)
 
@@ -404,7 +404,7 @@ void check_ram(unsigned int addr, unsigned int size)
 
 phys_size_t initdram(int board_type)
 {
-	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
 	volatile memctl8xx_t *memctl = &immap->im_memctl;
 	long int size;
 
@@ -420,10 +420,10 @@ phys_size_t initdram(int board_type)
 	/*
 	 * Map controller bank 3 to the SDRAM bank at preliminary address.
 	 */
-	memctl->memc_or3 = CFG_OR3_PRELIM;
-	memctl->memc_br3 = CFG_BR3_PRELIM;
+	memctl->memc_or3 = CONFIG_SYS_OR3_PRELIM;
+	memctl->memc_br3 = CONFIG_SYS_BR3_PRELIM;
 
-	memctl->memc_mbmr = CFG_MAMR & ~MAMR_PTAE;	/* no refresh yet */
+	memctl->memc_mbmr = CONFIG_SYS_MAMR & ~MAMR_PTAE;	/* no refresh yet */
 
 	udelay(200);
 
@@ -544,7 +544,7 @@ void reset_phys(void)
 
 int board_early_init_f(void)
 {
-	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
 	volatile iop8xx_t *ioport = &immap->im_ioport;
 	volatile cpm8xx_t *cpm = &immap->im_cpm;
 	volatile memctl8xx_t *memctl = &immap->im_memctl;
@@ -600,13 +600,13 @@ int board_early_init_f(void)
 #include <linux/mtd/nand_legacy.h>
 
 extern ulong nand_probe(ulong physadr);
-extern struct nand_chip nand_dev_desc[CFG_MAX_NAND_DEVICE];
+extern struct nand_chip nand_dev_desc[CONFIG_SYS_MAX_NAND_DEVICE];
 
 void nand_init(void)
 {
 	unsigned long totlen;
 
-	totlen = nand_probe(CFG_NAND_BASE);
+	totlen = nand_probe(CONFIG_SYS_NAND_BASE);
 	printf ("%4lu MB\n", totlen >> 20);
 }
 #endif
@@ -620,21 +620,7 @@ void hw_watchdog_reset(void)
 
 #endif
 
-#ifdef CONFIG_SHOW_ACTIVITY
-
-/* called from timer interrupt every 1/CFG_HZ sec */
-void board_show_activity(ulong timestamp)
-{
-}
-
-/* called when looping */
-void show_activity(int arg)
-{
-}
-
-#endif
-
-#if defined(CFG_CONSOLE_IS_IN_ENV) && defined(CFG_CONSOLE_OVERWRITE_ROUTINE)
+#if defined(CONFIG_SYS_CONSOLE_IS_IN_ENV) && defined(CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE)
 int overwrite_console(void)
 {
 	/* printf("overwrite_console called\n"); */
@@ -659,10 +645,10 @@ int last_stage_init(void)
 
 #if CONFIG_NETTA2_VERSION == 2
 	/* assert peripheral reset */
-	((volatile immap_t *)CFG_IMMR)->im_ioport.iop_pcdat &= ~_BW(12);
+	((volatile immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pcdat &= ~_BW(12);
 	for (i = 0; i < 10; i++)
 		udelay(1000);
-	((volatile immap_t *)CFG_IMMR)->im_ioport.iop_pcdat |=  _BW(12);
+	((volatile immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pcdat |=  _BW(12);
 #endif
 	reset_phys();
 
diff --git a/board/netta2/u-boot.lds b/board/netta2/u-boot.lds
index f560189c0..4966f4d4d 100644
--- a/board/netta2/u-boot.lds
+++ b/board/netta2/u-boot.lds
@@ -63,7 +63,7 @@ SECTIONS
     lib_ppc/time.o		(.text)
 
     . = DEFINED(env_offset) ? env_offset : .;
-    common/environment.o	(.text)
+    common/env_embedded.o	(.text)
 
     *(.text)
     *(.fixup)
@@ -134,6 +134,7 @@ SECTIONS
    *(.dynbss)
    *(.bss)
    *(COMMON)
+   . = ALIGN(4);
   }
   _end = . ;
   PROVIDE (end = .);
diff --git a/board/netta2/u-boot.lds.debug b/board/netta2/u-boot.lds.debug
index 5bf1a6628..d47c4082a 100644
--- a/board/netta2/u-boot.lds.debug
+++ b/board/netta2/u-boot.lds.debug
@@ -61,7 +61,7 @@ SECTIONS
     lib_generic/crc32.o		(.text)
 
     . = env_offset;
-    common/environment.o(.text)
+    common/env_embedded.o(.text)
 
     *(.text)
     *(.fixup)
diff --git a/board/netvia/flash.c b/board/netvia/flash.c
index d31f7707f..98479a50b 100644
--- a/board/netvia/flash.c
+++ b/board/netvia/flash.c
@@ -24,7 +24,7 @@
 #include <common.h>
 #include <mpc8xx.h>
 
-flash_info_t flash_info[CFG_MAX_FLASH_BANKS];	/* info for FLASH chips    */
+flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];	/* info for FLASH chips    */
 
 /*-----------------------------------------------------------------------
  * Functions
@@ -38,13 +38,13 @@ static void flash_get_offsets(ulong base, flash_info_t * info);
 
 unsigned long flash_init(void)
 {
-	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
 	volatile memctl8xx_t *memctl = &immap->im_memctl;
 	unsigned long size;
 	int i;
 
 	/* Init: no FLASHes known */
-	for (i = 0; i < CFG_MAX_FLASH_BANKS; ++i)
+	for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; ++i)
 		flash_info[i].flash_id = FLASH_UNKNOWN;
 
 	size = flash_get_size((vu_long *) FLASH_BASE0_PRELIM, &flash_info[0]);
@@ -54,28 +54,28 @@ unsigned long flash_init(void)
 	}
 
 	/* Remap FLASH according to real size */
-	memctl->memc_or0 = CFG_OR_TIMING_FLASH | (-size & 0xFFFF8000);
-	memctl->memc_br0 = (CFG_FLASH_BASE & BR_BA_MSK) | (memctl->memc_br0 & ~(BR_BA_MSK));
+	memctl->memc_or0 = CONFIG_SYS_OR_TIMING_FLASH | (-size & 0xFFFF8000);
+	memctl->memc_br0 = (CONFIG_SYS_FLASH_BASE & BR_BA_MSK) | (memctl->memc_br0 & ~(BR_BA_MSK));
 
 	/* Re-do sizing to get full correct info */
-	size = flash_get_size((vu_long *) CFG_FLASH_BASE, &flash_info[0]);
+	size = flash_get_size((vu_long *) CONFIG_SYS_FLASH_BASE, &flash_info[0]);
 
-	flash_get_offsets(CFG_FLASH_BASE, &flash_info[0]);
+	flash_get_offsets(CONFIG_SYS_FLASH_BASE, &flash_info[0]);
 
 	/* monitor protection ON by default */
 	flash_protect(FLAG_PROTECT_SET,
-			CFG_FLASH_BASE, CFG_FLASH_BASE + monitor_flash_len - 1,
+			CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE + monitor_flash_len - 1,
 			&flash_info[0]);
 
 	flash_protect ( FLAG_PROTECT_SET,
-			CFG_ENV_ADDR,
-			CFG_ENV_ADDR + CFG_ENV_SIZE - 1,
+			CONFIG_ENV_ADDR,
+			CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1,
 			&flash_info[0]);
 
-#ifdef CFG_ENV_ADDR_REDUND
+#ifdef CONFIG_ENV_ADDR_REDUND
 	flash_protect ( FLAG_PROTECT_SET,
-			CFG_ENV_ADDR_REDUND,
-			CFG_ENV_ADDR_REDUND + CFG_ENV_SIZE_REDUND - 1,
+			CONFIG_ENV_ADDR_REDUND,
+			CONFIG_ENV_ADDR_REDUND + CONFIG_ENV_SIZE_REDUND - 1,
 			&flash_info[0]);
 #endif
 
@@ -427,7 +427,7 @@ int flash_erase(flash_info_t * info, int s_first, int s_last)
 	last = start;
 	addr = (vu_char *) (info->start[l_sect]);
 	while ((addr[0] & 0x80) != 0x80) {
-		if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+		if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
 			printf("Timeout\n");
 			return 1;
 		}
@@ -500,7 +500,7 @@ static int write_byte(flash_info_t * info, ulong dest, uchar data)
 	/* data polling for D7 */
 	start = get_timer(0);
 	while ((*((vu_char *) dest) & 0x80) != (data & 0x80)) {
-		if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+		if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
 			return (1);
 		}
 	}
diff --git a/board/netvia/netvia.c b/board/netvia/netvia.c
index 4140bac86..0b032c4a7 100644
--- a/board/netvia/netvia.c
+++ b/board/netvia/netvia.c
@@ -247,7 +247,7 @@ int checkboard(void)
 
 phys_size_t initdram(int board_type)
 {
-	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
 	volatile memctl8xx_t *memctl = &immap->im_memctl;
 	long int size;
 
@@ -256,17 +256,17 @@ phys_size_t initdram(int board_type)
 	/*
 	 * Preliminary prescaler for refresh
 	 */
-	memctl->memc_mptpr = CFG_MPTPR_1BK_8K;
+	memctl->memc_mptpr = CONFIG_SYS_MPTPR_1BK_8K;
 
 	memctl->memc_mar = MAR_SDRAM_INIT;	/* 32-bit address to be output on the address bus if AMX = 0b11 */
 
     /*
      * Map controller bank 3 to the SDRAM bank at preliminary address.
      */
-	memctl->memc_or3 = CFG_OR3_PRELIM;
-	memctl->memc_br3 = CFG_BR3_PRELIM;
+	memctl->memc_or3 = CONFIG_SYS_OR3_PRELIM;
+	memctl->memc_br3 = CONFIG_SYS_BR3_PRELIM;
 
-	memctl->memc_mamr = CFG_MAMR_9COL & ~MAMR_PTAE;	/* no refresh yet */
+	memctl->memc_mamr = CONFIG_SYS_MAMR_9COL & ~MAMR_PTAE;	/* no refresh yet */
 
 	udelay(200);
 
@@ -282,7 +282,7 @@ phys_size_t initdram(int board_type)
 
 	udelay(1000);
 
-	memctl->memc_mamr = CFG_MAMR_9COL;
+	memctl->memc_mamr = CONFIG_SYS_MAMR_9COL;
 
 	size = SDRAM_MAX_SIZE;
 
@@ -358,7 +358,7 @@ int misc_init_r(void)
 
 int board_early_init_f(void)
 {
-	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
 	volatile iop8xx_t *ioport = &immap->im_ioport;
 	volatile cpm8xx_t *cpm = &immap->im_cpm;
 	volatile memctl8xx_t *memctl = &immap->im_memctl;
@@ -421,11 +421,11 @@ int board_early_init_f(void)
 #include <linux/mtd/nand_legacy.h>
 
 extern ulong nand_probe(ulong physadr);
-extern struct nand_chip nand_dev_desc[CFG_MAX_NAND_DEVICE];
+extern struct nand_chip nand_dev_desc[CONFIG_SYS_MAX_NAND_DEVICE];
 
 void nand_init(void)
 {
-	unsigned long totlen = nand_probe(CFG_NAND_BASE);
+	unsigned long totlen = nand_probe(CONFIG_SYS_NAND_BASE);
 
 	printf ("%4lu MB\n", totlen >> 20);
 }
diff --git a/board/netvia/u-boot.lds b/board/netvia/u-boot.lds
index b4f210e48..6bc57682f 100644
--- a/board/netvia/u-boot.lds
+++ b/board/netvia/u-boot.lds
@@ -63,7 +63,7 @@ SECTIONS
     lib_ppc/time.o		(.text)
 
     . = DEFINED(env_offset) ? env_offset : .;
-    common/environment.o	(.text)
+    common/env_embedded.o	(.text)
 
     *(.text)
     *(.fixup)
@@ -134,6 +134,7 @@ SECTIONS
    *(.dynbss)
    *(.bss)
    *(COMMON)
+   . = ALIGN(4);
   }
   _end = . ;
   PROVIDE (end = .);
diff --git a/board/netvia/u-boot.lds.debug b/board/netvia/u-boot.lds.debug
index 1014ec6e8..9210c43d5 100644
--- a/board/netvia/u-boot.lds.debug
+++ b/board/netvia/u-boot.lds.debug
@@ -61,7 +61,7 @@ SECTIONS
     lib_generic/crc32.o		(.text)
 
     . = env_offset;
-    common/environment.o(.text)
+    common/env_embedded.o(.text)
 
     *(.text)
     *(.fixup)
diff --git a/board/ns9750dev/flash.c b/board/ns9750dev/flash.c
index e7d65157f..5b56b9839 100644
--- a/board/ns9750dev/flash.c
+++ b/board/ns9750dev/flash.c
@@ -32,7 +32,7 @@
 #include <linux/byteorder/swab.h>
 
 #define PHYS_FLASH_SECT_SIZE	0x00020000	/* 256 KB sectors (x2) */
-flash_info_t flash_info[CFG_MAX_FLASH_BANKS];	/* info for FLASH chips    */
+flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];	/* info for FLASH chips    */
 
 /* Board support for 1 or 2 flash devices */
 #undef FLASH_PORT_WIDTH32
@@ -88,7 +88,7 @@ unsigned long flash_init (void)
 {
 	int i;
 	ulong size = 0;
-	for (i = 0; i < CFG_MAX_FLASH_BANKS; i++) {
+	for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) {
 		switch (i) {
 		case 0:
 			flash_get_size ((FPW *) PHYS_FLASH_1, &flash_info[i]);
@@ -104,12 +104,12 @@ unsigned long flash_init (void)
 	/* Protect monitor and environment sectors
 	 */
 	flash_protect (FLAG_PROTECT_SET,
-			CFG_FLASH_BASE,
-			CFG_FLASH_BASE + monitor_flash_len - 1, &flash_info[0]);
+			CONFIG_SYS_FLASH_BASE,
+			CONFIG_SYS_FLASH_BASE + monitor_flash_len - 1, &flash_info[0]);
 
 	flash_protect (FLAG_PROTECT_SET,
-			CFG_ENV_ADDR,
-			CFG_ENV_ADDR + CFG_ENV_SIZE - 1, &flash_info[0]);
+			CONFIG_ENV_ADDR,
+			CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1, &flash_info[0]);
 
 	return size;
 }
@@ -227,10 +227,10 @@ static ulong flash_get_size (FPW * addr, flash_info_t * info)
 		break;
 	}
 
-	if (info->sector_count > CFG_MAX_FLASH_SECT) {
+	if (info->sector_count > CONFIG_SYS_MAX_FLASH_SECT) {
 		printf ("** ERROR: sector count %d > max (%d) **\n",
-				info->sector_count, CFG_MAX_FLASH_SECT);
-		info->sector_count = CFG_MAX_FLASH_SECT;
+				info->sector_count, CONFIG_SYS_MAX_FLASH_SECT);
+		info->sector_count = CONFIG_SYS_MAX_FLASH_SECT;
 	}
 
 	addr[0] = (FPW) 0x00FF00FF;	/* restore read mode */
@@ -322,7 +322,7 @@ int flash_erase (flash_info_t * info, int s_first, int s_last)
 				*addr) & (FPW) 0x00800080) !=
 				(FPW) 0x00800080) {
 					if (get_timer_masked () >
-					CFG_FLASH_ERASE_TOUT) {
+					CONFIG_SYS_FLASH_ERASE_TOUT) {
 					printf ("Timeout\n");
 					/* suspend erase     */
 					*addr = (FPW) 0x00B000B0;
@@ -458,7 +458,7 @@ static int write_data (flash_info_t * info, ulong dest, FPW data)
 
 	/* wait while polling the status register */
 	while (((status = *addr) & (FPW) 0x00800080) != (FPW) 0x00800080) {
-		if (get_timer_masked () > CFG_FLASH_WRITE_TOUT) {
+		if (get_timer_masked () > CONFIG_SYS_FLASH_WRITE_TOUT) {
 			*addr = (FPW) 0x00FF00FF;	/* restore read mode */
 			return (1);
 		}
diff --git a/board/ns9750dev/u-boot.lds b/board/ns9750dev/u-boot.lds
index a3de6ac61..c6567014e 100644
--- a/board/ns9750dev/u-boot.lds
+++ b/board/ns9750dev/u-boot.lds
@@ -53,7 +53,7 @@ SECTIONS
 
 	. = ALIGN(4);
 	__bss_start = .;
-	.bss (NOLOAD) : { *(.bss) }
+	.bss (NOLOAD) : { *(.bss) . = ALIGN(4); }
 	_end = . ;
 
 }
diff --git a/board/nx823/flash.c b/board/nx823/flash.c
index 581925e48..194d841e4 100644
--- a/board/nx823/flash.c
+++ b/board/nx823/flash.c
@@ -27,7 +27,7 @@
 #include <common.h>
 #include <mpc8xx.h>
 
-flash_info_t	flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips	*/
+flash_info_t	flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips	*/
 extern u_long  *my_sernum;		/* from nx823.c */
 
 /*-----------------------------------------------------------------------
@@ -63,13 +63,13 @@ static void  flash_get_offsets (ulong base, flash_info_t *info);
 
 unsigned long flash_init (void)
 {
-	volatile immap_t     *immap  = (immap_t *)CFG_IMMR;
+	volatile immap_t     *immap  = (immap_t *)CONFIG_SYS_IMMR;
 	volatile memctl8xx_t *memctl = &immap->im_memctl;
 	unsigned long size_b0;
 	int i;
 
 	/* Init: no FLASHes known */
-	for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) {
+	for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
 		flash_info[i].flash_id = FLASH_UNKNOWN;
 	}
 
@@ -82,18 +82,18 @@ unsigned long flash_init (void)
 	}
 
 	/* Remap FLASH according to real size */
-	memctl->memc_or0 = CFG_OR_TIMING_FLASH | (-size_b0 & 0xFFFF8000);
-	memctl->memc_br0 = (CFG_FLASH_BASE & BR_BA_MSK) | BR_PS_16 | BR_MS_GPCM | BR_V;
+	memctl->memc_or0 = CONFIG_SYS_OR_TIMING_FLASH | (-size_b0 & 0xFFFF8000);
+	memctl->memc_br0 = (CONFIG_SYS_FLASH_BASE & BR_BA_MSK) | BR_PS_16 | BR_MS_GPCM | BR_V;
 
 	/* Re-do sizing to get full correct info */
-	size_b0 = flash_get_size((FPW *)CFG_FLASH_BASE, &flash_info[0]);
+	size_b0 = flash_get_size((FPW *)CONFIG_SYS_FLASH_BASE, &flash_info[0]);
 
-	flash_get_offsets (CFG_FLASH_BASE, &flash_info[0]);
+	flash_get_offsets (CONFIG_SYS_FLASH_BASE, &flash_info[0]);
 
 	/* monitor protection ON by default */
 	(void)flash_protect(FLAG_PROTECT_SET,
-			    CFG_FLASH_BASE,
-			    CFG_FLASH_BASE+monitor_flash_len-1,
+			    CONFIG_SYS_FLASH_BASE,
+			    CONFIG_SYS_FLASH_BASE+monitor_flash_len-1,
 			    &flash_info[0]);
 
 	flash_info[0].size = size_b0;
@@ -220,10 +220,10 @@ static ulong flash_get_size (FPW *addr, flash_info_t *info)
 		break;
 	}
 
-	if (info->sector_count > CFG_MAX_FLASH_SECT) {
+	if (info->sector_count > CONFIG_SYS_MAX_FLASH_SECT) {
 		printf ("** ERROR: sector count %d > max (%d) **\n",
-			info->sector_count, CFG_MAX_FLASH_SECT);
-		info->sector_count = CFG_MAX_FLASH_SECT;
+			info->sector_count, CONFIG_SYS_MAX_FLASH_SECT);
+		info->sector_count = CONFIG_SYS_MAX_FLASH_SECT;
 	}
 
 	addr[0] = (FPW)0x00FF00FF;      /* restore read mode */
@@ -294,7 +294,7 @@ int	flash_erase (flash_info_t *info, int s_first, int s_last)
 			udelay (1000);
 
 			while (((status = *addr) & (FPW)0x00800080) != (FPW)0x00800080) {
-				if ((now=get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+				if ((now=get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
 					printf ("Timeout\n");
 					*addr = (FPW)0x00B000B0; /* suspend erase	  */
 					*addr = (FPW)0x00FF00FF; /* reset to read mode */
@@ -343,9 +343,9 @@ int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
 #endif
 
 	/* save sernum if needed */
-	if (addr >= CFG_FLASH_SN_SECTOR && addr < CFG_FLASH_SN_BASE)
+	if (addr >= CONFIG_SYS_FLASH_SN_SECTOR && addr < CONFIG_SYS_FLASH_SN_BASE)
 	{
-		u_long dest = CFG_FLASH_SN_BASE;
+		u_long dest = CONFIG_SYS_FLASH_SN_BASE;
 		u_short *sn = (u_short *)my_sernum;
 
 		printf("(saving sernum)");
@@ -452,7 +452,7 @@ static int write_data (flash_info_t *info, ulong dest, FPW data)
 	start = get_timer (0);
 
 	while (((status = *addr) & (FPW)0x00800080) != (FPW)0x00800080) {
-		if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+		if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
 			*addr = (FPW)0x00FF00FF;	/* restore read mode */
 			return (1);
 		}
diff --git a/board/nx823/nx823.c b/board/nx823/nx823.c
index 18840ff48..df9aaab7a 100644
--- a/board/nx823/nx823.c
+++ b/board/nx823/nx823.c
@@ -159,7 +159,7 @@ int checkboard (void)
 
 phys_size_t initdram (int board_type)
 {
-	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
 	volatile memctl8xx_t *memctl = &immap->im_memctl;
 	long int size_b0, size_b1, size8, size9;
 
@@ -170,22 +170,22 @@ phys_size_t initdram (int board_type)
 	 * Up to 2 Banks of 64Mbit x 2 devices
 	 * Initial builds only have 1
 	 */
-	memctl->memc_mptpr = CFG_MPTPR_1BK_4K;
+	memctl->memc_mptpr = CONFIG_SYS_MPTPR_1BK_4K;
 	memctl->memc_mar = 0x00000088;
 
 	/*
 	 * Map controller SDRAM bank 0
 	 */
-	memctl->memc_or1 = CFG_OR1_PRELIM;
-	memctl->memc_br1 = CFG_BR1_PRELIM;
-	memctl->memc_mamr = CFG_MAMR_8COL & (~(MAMR_PTAE));	/* no refresh yet */
+	memctl->memc_or1 = CONFIG_SYS_OR1_PRELIM;
+	memctl->memc_br1 = CONFIG_SYS_BR1_PRELIM;
+	memctl->memc_mamr = CONFIG_SYS_MAMR_8COL & (~(MAMR_PTAE));	/* no refresh yet */
 	udelay (200);
 
 	/*
 	 * Map controller SDRAM bank 1
 	 */
-	memctl->memc_or2 = CFG_OR2_PRELIM;
-	memctl->memc_br2 = CFG_BR2_PRELIM;
+	memctl->memc_or2 = CONFIG_SYS_OR2_PRELIM;
+	memctl->memc_br2 = CONFIG_SYS_BR2_PRELIM;
 
 	/*
 	 * Perform SDRAM initializsation sequence
@@ -209,7 +209,7 @@ phys_size_t initdram (int board_type)
 	 * with two SDRAM banks or four cycles every 31.2 us with one
 	 * bank. It will be adjusted after memory sizing.
 	 */
-	memctl->memc_mptpr = CFG_MPTPR_2BK_8K;
+	memctl->memc_mptpr = CONFIG_SYS_MPTPR_2BK_8K;
 
 	memctl->memc_mar = 0x00000088;
 
@@ -219,7 +219,7 @@ phys_size_t initdram (int board_type)
 	 *
 	 * try 8 column mode
 	 */
-	size8 = dram_size (CFG_MAMR_8COL, (long *) SDRAM_BASE1_PRELIM,
+	size8 = dram_size (CONFIG_SYS_MAMR_8COL, (long *) SDRAM_BASE1_PRELIM,
 			   SDRAM_MAX_SIZE);
 
 	udelay (1000);
@@ -227,7 +227,7 @@ phys_size_t initdram (int board_type)
 	/*
 	 * try 9 column mode
 	 */
-	size9 = dram_size (CFG_MAMR_9COL, (long *) SDRAM_BASE1_PRELIM,
+	size9 = dram_size (CONFIG_SYS_MAMR_9COL, (long *) SDRAM_BASE1_PRELIM,
 			   SDRAM_MAX_SIZE);
 
 	if (size8 < size9) {	/* leave configuration at 9 columns     */
@@ -235,7 +235,7 @@ phys_size_t initdram (int board_type)
 /*	debug ("SDRAM Bank 0 in 9 column mode: %ld MB\n", size >> 20);	*/
 	} else {		/* back to 8 columns                    */
 		size_b0 = size8;
-		memctl->memc_mamr = CFG_MAMR_8COL;
+		memctl->memc_mamr = CONFIG_SYS_MAMR_8COL;
 		udelay (500);
 /*	debug ("SDRAM Bank 0 in 8 column mode: %ld MB\n", size >> 20);	*/
 	}
@@ -258,7 +258,7 @@ phys_size_t initdram (int board_type)
 	 */
 	if ((size_b0 < 0x02000000) && (size_b1 < 0x02000000)) {
 		/* reduce to 15.6 us (62.4 us / quad) */
-		memctl->memc_mptpr = CFG_MPTPR_2BK_4K;
+		memctl->memc_mptpr = CONFIG_SYS_MPTPR_2BK_4K;
 		udelay (1000);
 	}
 
@@ -268,9 +268,9 @@ phys_size_t initdram (int board_type)
 	if (size_b1 > size_b0) {	/* SDRAM Bank 1 is bigger - map first   */
 
 		memctl->memc_or2 =
-			((-size_b1) & 0xFFFF0000) | CFG_OR_TIMING_SDRAM;
+			((-size_b1) & 0xFFFF0000) | CONFIG_SYS_OR_TIMING_SDRAM;
 		memctl->memc_br2 =
-			(CFG_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V;
+			(CONFIG_SYS_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V;
 
 		if (size_b0 > 0) {
 			/*
@@ -278,9 +278,9 @@ phys_size_t initdram (int board_type)
 			 */
 			memctl->memc_or1 =
 				((-size_b0) & 0xFFFF0000) |
-				CFG_OR_TIMING_SDRAM;
+				CONFIG_SYS_OR_TIMING_SDRAM;
 			memctl->memc_br1 =
-				((CFG_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA |
+				((CONFIG_SYS_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA |
 				 BR_V)
 				+ size_b1;
 		} else {
@@ -295,16 +295,16 @@ phys_size_t initdram (int board_type)
 
 			/* adjust refresh rate depending on SDRAM type, one bank */
 			reg = memctl->memc_mptpr;
-			reg >>= 1;	/* reduce to CFG_MPTPR_1BK_8K / _4K */
+			reg >>= 1;	/* reduce to CONFIG_SYS_MPTPR_1BK_8K / _4K */
 			memctl->memc_mptpr = reg;
 		}
 
 	} else {		/* SDRAM Bank 0 is bigger - map first   */
 
 		memctl->memc_or1 =
-			((-size_b0) & 0xFFFF0000) | CFG_OR_TIMING_SDRAM;
+			((-size_b0) & 0xFFFF0000) | CONFIG_SYS_OR_TIMING_SDRAM;
 		memctl->memc_br1 =
-			(CFG_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V;
+			(CONFIG_SYS_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V;
 
 		if (size_b1 > 0) {
 			/*
@@ -312,9 +312,9 @@ phys_size_t initdram (int board_type)
 			 */
 			memctl->memc_or2 =
 				((-size_b1) & 0xFFFF0000) |
-				CFG_OR_TIMING_SDRAM;
+				CONFIG_SYS_OR_TIMING_SDRAM;
 			memctl->memc_br2 =
-				((CFG_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA |
+				((CONFIG_SYS_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA |
 				 BR_V)
 				+ size_b0;
 		} else {
@@ -329,7 +329,7 @@ phys_size_t initdram (int board_type)
 
 			/* adjust refresh rate depending on SDRAM type, one bank */
 			reg = memctl->memc_mptpr;
-			reg >>= 1;	/* reduce to CFG_MPTPR_1BK_8K / _4K */
+			reg >>= 1;	/* reduce to CONFIG_SYS_MPTPR_1BK_8K / _4K */
 			memctl->memc_mptpr = reg;
 		}
 	}
@@ -352,7 +352,7 @@ phys_size_t initdram (int board_type)
 static long int dram_size (long int mamr_value, long int *base,
 			   long int maxsize)
 {
-	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
 	volatile memctl8xx_t *memctl = &immap->im_memctl;
 
 	memctl->memc_mamr = mamr_value;
@@ -387,7 +387,7 @@ void load_sernum_ethaddr (void)
 	bd_t *bd = gd->bd;
 
 	for (i = 0; i < 8; i++) {
-		bd->bi_sernum[i] = *(u_char *) (CFG_FLASH_SN_BASE + i);
+		bd->bi_sernum[i] = *(u_char *) (CONFIG_SYS_FLASH_SN_BASE + i);
 	}
 	bd->bi_enetaddr[0] = 0x10;
 	bd->bi_enetaddr[1] = 0x20;
diff --git a/board/nx823/u-boot.lds b/board/nx823/u-boot.lds
index 85117aa56..759b41290 100644
--- a/board/nx823/u-boot.lds
+++ b/board/nx823/u-boot.lds
@@ -53,7 +53,7 @@ SECTIONS
   .text      :
   {
     cpu/mpc8xx/start.o	(.text)
-    common/environment.o(.text)
+    common/env_embedded.o(.text)
 
     *(.text)
     *(.fixup)
@@ -124,6 +124,7 @@ SECTIONS
    *(.dynbss)
    *(.bss)
    *(COMMON)
+   . = ALIGN(4);
   }
   _end = . ;
   PROVIDE (end = .);
diff --git a/board/nx823/u-boot.lds.debug b/board/nx823/u-boot.lds.debug
index 85072feda..dbec9860a 100644
--- a/board/nx823/u-boot.lds.debug
+++ b/board/nx823/u-boot.lds.debug
@@ -61,7 +61,7 @@ SECTIONS
     lib_generic/crc32.o		(.text)
 
     . = env_offset;
-    common/environment.o(.text)
+    common/env_embedded.o(.text)
 
     *(.text)
     *(.fixup)
diff --git a/board/o2dnt/flash.c b/board/o2dnt/flash.c
index 349086ffb..9f3088004 100644
--- a/board/o2dnt/flash.c
+++ b/board/o2dnt/flash.c
@@ -55,7 +55,7 @@ typedef volatile unsigned char FLASH_PORT_WIDTHV;
 #define FLASH_CYCLE1	0x0555
 #define FLASH_CYCLE2	0x02aa
 
-flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
+flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */
 
 /*-----------------------------------------------------------------------
  * Functions
@@ -82,33 +82,33 @@ unsigned long flash_init (void)
 	flash_preinit();
 
 	/* Init: no FLASHes known */
-	for (i = 0; i < CFG_MAX_FLASH_BANKS; ++i) {
+	for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
 		memset(&flash_info[i], 0, sizeof(flash_info_t));
 		flash_info[i].flash_id = FLASH_UNKNOWN;
 	}
 
 	/* Query flash chip */
 	flash_info[0].size =
-		flash_get_size((FPW *)CFG_FLASH_BASE, &flash_info[0]);
+		flash_get_size((FPW *)CONFIG_SYS_FLASH_BASE, &flash_info[0]);
 	size += flash_info[0].size;
 
 	/* get the h/w and s/w protection status in sync */
 	flash_sync_real_protect(&flash_info[0]);
 
-#if CFG_MONITOR_BASE >= CFG_FLASH_BASE
+#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE
 	/* monitor protection ON by default */
 	flash_protect(FLAG_PROTECT_SET,
-			CFG_MONITOR_BASE,
-			CFG_MONITOR_BASE+monitor_flash_len-1,
-			flash_get_info(CFG_MONITOR_BASE));
+			CONFIG_SYS_MONITOR_BASE,
+			CONFIG_SYS_MONITOR_BASE+monitor_flash_len-1,
+			flash_get_info(CONFIG_SYS_MONITOR_BASE));
 #endif
 
-#ifdef	CFG_ENV_IS_IN_FLASH
+#ifdef	CONFIG_ENV_IS_IN_FLASH
 	/* ENV protection ON by default */
 	flash_protect(FLAG_PROTECT_SET,
-			CFG_ENV_ADDR,
-			CFG_ENV_ADDR+CFG_ENV_SIZE-1,
-			flash_get_info(CFG_ENV_ADDR));
+			CONFIG_ENV_ADDR,
+			CONFIG_ENV_ADDR+CONFIG_ENV_SIZE-1,
+			flash_get_info(CONFIG_ENV_ADDR));
 #endif
 
 
@@ -135,7 +135,7 @@ static flash_info_t *flash_get_info(ulong base)
 	int i;
 	flash_info_t * info;
 
-	for (i = 0; i < CFG_MAX_FLASH_BANKS; i ++) {
+	for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i ++) {
 		info = & flash_info[i];
 		if (info->size &&
 				info->start[0] <= base &&
@@ -143,7 +143,7 @@ static flash_info_t *flash_get_info(ulong base)
 			break;
 	}
 
-	return (i == CFG_MAX_FLASH_BANKS ? 0 : info);
+	return (i == CONFIG_SYS_MAX_FLASH_BANKS ? 0 : info);
 }
 
 /*-----------------------------------------------------------------------
@@ -328,7 +328,7 @@ int flash_erase (flash_info_t *info, int s_first, int s_last)
 		udelay (1000);
 
 		while ((*addr & (FPW) INTEL_FINISHED) != (FPW) INTEL_FINISHED) {
-			if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+			if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
 				printf ("Timeout\n");
 				*addr = (FPW) INTEL_SUSPEND;/* suspend erase */
 				flash_reset(info);	/* reset to read mode */
@@ -337,7 +337,7 @@ int flash_erase (flash_info_t *info, int s_first, int s_last)
 			}
 
 			/* show that we're waiting */
-			if ((get_timer(last)) > CFG_HZ) { /* every second */
+			if ((get_timer(last)) > CONFIG_SYS_HZ) { /* every second */
 				putc ('.');
 				last = get_timer(0);
 			}
@@ -425,7 +425,7 @@ static int write_data (flash_info_t *info, FPWV *dest, FPW data)
 
 	/* wait while polling the status register */
 	while (((status = *addr) & (FPW) INTEL_FINISHED) != (FPW) INTEL_FINISHED) {
-		if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+		if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
 			*addr = (FPW) INTEL_RESET;	/* restore read mode */
 			return (1);
 		}
@@ -464,7 +464,7 @@ int flash_real_protect (flash_info_t * info, long sector, int prot)
 	start = get_timer (0);
 
 	while ((*addr & INTEL_FINISHED) != INTEL_FINISHED) {
-		if (get_timer (start) > CFG_FLASH_UNLOCK_TOUT) {
+		if (get_timer (start) > CONFIG_SYS_FLASH_UNLOCK_TOUT) {
 			printf ("Flash lock bit operation timed out\n");
 			rc = 1;
 			break;
@@ -494,7 +494,7 @@ int flash_real_protect (flash_info_t * info, long sector, int prot)
 				while ((*addr & INTEL_FINISHED) !=
 				       INTEL_FINISHED) {
 					if (get_timer (start) >
-					    CFG_FLASH_UNLOCK_TOUT) {
+					    CONFIG_SYS_FLASH_UNLOCK_TOUT) {
 						printf ("Flash lock bit operation timed out\n");
 						rc = 1;
 						break;
@@ -550,7 +550,7 @@ static unsigned char intel_sector_protected (flash_info_t *info, ushort sector)
 	/*
 	 * first, wait for the WSM to be finished. The rationale for
 	 * waiting for the WSM to become idle for at most
-	 * CFG_FLASH_ERASE_TOUT is as follows. The WSM can be busy
+	 * CONFIG_SYS_FLASH_ERASE_TOUT is as follows. The WSM can be busy
 	 * because of: (1) erase, (2) program or (3) lock bit
 	 * configuration. So we just wait for the longest timeout of
 	 * the (1)-(3), i.e. the erase timeout.
@@ -563,7 +563,7 @@ static unsigned char intel_sector_protected (flash_info_t *info, ushort sector)
 
 	start = get_timer (0);
 	while ((*addr & (FPW) INTEL_FINISHED) != (FPW) INTEL_FINISHED) {
-		if (get_timer (start) > CFG_FLASH_ERASE_TOUT) {
+		if (get_timer (start) > CONFIG_SYS_FLASH_ERASE_TOUT) {
 			*addr = (FPW) INTEL_RESET; /* restore read mode */
 			printf("WSM busy too long, can't get prot status\n");
 			return 1;
diff --git a/board/o2dnt/o2dnt.c b/board/o2dnt/o2dnt.c
index a4eed3a43..c72a7414e 100644
--- a/board/o2dnt/o2dnt.c
+++ b/board/o2dnt/o2dnt.c
@@ -27,6 +27,7 @@
 #include <common.h>
 #include <mpc5xxx.h>
 #include <pci.h>
+#include <netdev.h>
 
 #define SDRAM_MODE      0x00CD0000
 #define SDRAM_CONTROL   0x504F0000
@@ -64,7 +65,7 @@ static void sdram_start (int hi_addr)
 
 /*
  * ATTENTION: Although partially referenced initdram does NOT make real use
- *            use of CFG_SDRAM_BASE. The code does not work if CFG_SDRAM_BASE
+ *            use of CONFIG_SYS_SDRAM_BASE. The code does not work if CONFIG_SYS_SDRAM_BASE
  *            is something else than 0x00000000.
  */
 phys_size_t initdram (int board_type)
@@ -85,9 +86,9 @@ phys_size_t initdram (int board_type)
 
 	/* find RAM size using SDRAM CS0 only */
 	sdram_start(0);
-	test1 = get_ram_size((long *)CFG_SDRAM_BASE, 0x80000000);
+	test1 = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE, 0x80000000);
 	sdram_start(1);
-	test2 = get_ram_size((long *)CFG_SDRAM_BASE, 0x80000000);
+	test2 = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE, 0x80000000);
 	if (test1 > test2) {
 		sdram_start(0);
 		dramsize = test1;
@@ -113,11 +114,11 @@ phys_size_t initdram (int board_type)
 	if (!dramsize)
 		sdram_start(0);
 
-	test2 = test1 = get_ram_size((long *)(CFG_SDRAM_BASE + dramsize), 0x80000000);
+	test2 = test1 = get_ram_size((long *)(CONFIG_SYS_SDRAM_BASE + dramsize), 0x80000000);
 
 	if (!dramsize) {
 		sdram_start(1);
-		test2 = get_ram_size((long *)(CFG_SDRAM_BASE + dramsize), 0x80000000);
+		test2 = get_ram_size((long *)(CONFIG_SYS_SDRAM_BASE + dramsize), 0x80000000);
 	}
 
 	if (test1 > test2) {
@@ -163,10 +164,10 @@ void flash_afterinit(ulong size)
 {
 	if (size == 0x800000) { /* adjust mapping */
 		*(vu_long *)MPC5XXX_BOOTCS_START = *(vu_long *)MPC5XXX_CS0_START =
-			START_REG(CFG_BOOTCS_START | size);
+			START_REG(CONFIG_SYS_BOOTCS_START | size);
 
 		*(vu_long *)MPC5XXX_BOOTCS_STOP = *(vu_long *)MPC5XXX_CS0_STOP =
-			STOP_REG(CFG_BOOTCS_START | size, size);
+			STOP_REG(CONFIG_SYS_BOOTCS_START | size, size);
 	}
 }
 
@@ -180,3 +181,9 @@ void pci_init_board(void)
 	pci_mpc5xxx_init(&hose);
 }
 #endif
+
+int board_eth_init(bd_t *bis)
+{
+	cpu_eth_init(bis); /* Built in FEC comes first */
+	return pci_eth_init(bis);
+}
diff --git a/board/omap1510inn/u-boot.lds b/board/omap1510inn/u-boot.lds
index e0c7920df..1c70fcdf3 100644
--- a/board/omap1510inn/u-boot.lds
+++ b/board/omap1510inn/u-boot.lds
@@ -52,6 +52,6 @@ SECTIONS
 
 	. = ALIGN(4);
 	__bss_start = .;
-	.bss (NOLOAD) : { *(.bss) }
+	.bss (NOLOAD) : { *(.bss) . = ALIGN(4); }
 	_end = .;
 }
diff --git a/board/omap1610inn/flash.c b/board/omap1610inn/flash.c
index c8e4c9e25..36200ad85 100644
--- a/board/omap1610inn/flash.c
+++ b/board/omap1610inn/flash.c
@@ -32,7 +32,7 @@
 #include <linux/byteorder/swab.h>
 
 #define PHYS_FLASH_SECT_SIZE	0x00020000	/* 256 KB sectors (x2) */
-flash_info_t flash_info[CFG_MAX_FLASH_BANKS];	/* info for FLASH chips	   */
+flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];	/* info for FLASH chips	   */
 
 /* Board support for 1 or 2 flash devices */
 #undef FLASH_PORT_WIDTH32
@@ -90,11 +90,11 @@ unsigned long flash_init (void)
 	int i;
 	ulong size = 0;
 
-	for (i = 0; i < CFG_MAX_FLASH_BANKS; i++) {
+	for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) {
 		switch (i) {
 		case 0:
-			flash_get_size ((FPW *) CFG_FLASH_BASE, &flash_info[i]);
-			flash_get_offsets (CFG_FLASH_BASE, &flash_info[i]);
+			flash_get_size ((FPW *) CONFIG_SYS_FLASH_BASE, &flash_info[i]);
+			flash_get_offsets (CONFIG_SYS_FLASH_BASE, &flash_info[i]);
 			/* to reset the lock bit */
 			flash_unlock(&flash_info[i]);
 			break;
@@ -108,12 +108,12 @@ unsigned long flash_init (void)
 	/* Protect monitor and environment sectors
 	 */
 	flash_protect (FLAG_PROTECT_SET,
-			CFG_FLASH_BASE,
-			CFG_FLASH_BASE + monitor_flash_len - 1, &flash_info[0]);
+			CONFIG_SYS_FLASH_BASE,
+			CONFIG_SYS_FLASH_BASE + monitor_flash_len - 1, &flash_info[0]);
 
 	flash_protect (FLAG_PROTECT_SET,
-			CFG_ENV_ADDR,
-			CFG_ENV_ADDR + CFG_ENV_SIZE - 1, &flash_info[0]);
+			CONFIG_ENV_ADDR,
+			CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1, &flash_info[0]);
 
 	return size;
 }
@@ -123,7 +123,7 @@ unsigned long flash_init (void)
 void flash_unlock(flash_info_t * info)
 {
 	int j;
-	for (j=2;j<CFG_MAX_FLASH_SECT;j++){
+	for (j=2;j<CONFIG_SYS_MAX_FLASH_SECT;j++){
 	FPWV *addr = (FPWV *) (info->start[j]);
 	flash_unprotect_sectors (addr);
 	*addr = (FPW) 0x00500050;/* clear status register */
@@ -244,10 +244,10 @@ static ulong flash_get_size (FPW * addr, flash_info_t * info)
 		break;
 	}
 
-	if (info->sector_count > CFG_MAX_FLASH_SECT) {
+	if (info->sector_count > CONFIG_SYS_MAX_FLASH_SECT) {
 		printf ("** ERROR: sector count %d > max (%d) **\n",
-				info->sector_count, CFG_MAX_FLASH_SECT);
-		info->sector_count = CFG_MAX_FLASH_SECT;
+				info->sector_count, CONFIG_SYS_MAX_FLASH_SECT);
+		info->sector_count = CONFIG_SYS_MAX_FLASH_SECT;
 	}
 
 	addr[0] = (FPW) 0x00FF00FF;	/* restore read mode */
@@ -339,7 +339,7 @@ int flash_erase (flash_info_t * info, int s_first, int s_last)
 				*addr) & (FPW) 0x00800080) !=
 				(FPW) 0x00800080) {
 					if (get_timer_masked () >
-					CFG_FLASH_ERASE_TOUT) {
+					CONFIG_SYS_FLASH_ERASE_TOUT) {
 					printf ("Timeout\n");
 					/* suspend erase     */
 					*addr = (FPW) 0x00B000B0;
@@ -474,7 +474,7 @@ static int write_data (flash_info_t * info, ulong dest, FPW data)
 
 	/* wait while polling the status register */
 	while (((status = *addr) & (FPW) 0x00800080) != (FPW) 0x00800080) {
-		if (get_timer_masked () > CFG_FLASH_WRITE_TOUT) {
+		if (get_timer_masked () > CONFIG_SYS_FLASH_WRITE_TOUT) {
 			*addr = (FPW) 0x00FF00FF;	/* restore read mode */
 			return (1);
 		}
diff --git a/board/omap1610inn/u-boot.lds b/board/omap1610inn/u-boot.lds
index a4fcd1a9b..d86eb3621 100644
--- a/board/omap1610inn/u-boot.lds
+++ b/board/omap1610inn/u-boot.lds
@@ -47,6 +47,6 @@ SECTIONS
 
 	. = ALIGN(4);
 	__bss_start = .;
-	.bss (NOLOAD) : { *(.bss) }
+	.bss (NOLOAD) : { *(.bss) . = ALIGN(4); }
 	_end = .;
 }
diff --git a/board/omap2420h4/mem.c b/board/omap2420h4/mem.c
index a3295fd4e..c8b4186dc 100644
--- a/board/omap2420h4/mem.c
+++ b/board/omap2420h4/mem.c
@@ -327,7 +327,7 @@ void gpmc_init(void)
 	__raw_writel(0x10, GPMC_SYSCONFIG);	/* smart idle */
 	__raw_writel(0x0, GPMC_IRQENABLE);	/* isr's sources masked */
 	__raw_writel(tval, GPMC_TIMEOUT_CONTROL);/* timeout disable */
-#ifdef CFG_NAND_BOOT
+#ifdef CONFIG_SYS_NAND_BOOT
 	__raw_writel(0x001, GPMC_CONFIG);	/* set nWP, disable limited addr */
 #else
 	__raw_writel(0x111, GPMC_CONFIG);	/* set nWP, disable limited addr */
@@ -343,7 +343,7 @@ void gpmc_init(void)
 	__raw_writel(0x0, GPMC_CONFIG7_0);	/* disable current map */
 	sdelay(1000);
 
-#ifdef CFG_NAND_BOOT
+#ifdef CONFIG_SYS_NAND_BOOT
 	__raw_writel(H4_24XX_GPMC_CONFIG1_0|mtype|mwidth, GPMC_CONFIG1_0);
 #else
 	__raw_writel(H4_24XX_GPMC_CONFIG1_0|mux|mtype|mwidth, GPMC_CONFIG1_0);
diff --git a/board/omap2420h4/omap2420h4.c b/board/omap2420h4/omap2420h4.c
index 09b070dc1..0fe9380cc 100644
--- a/board/omap2420h4/omap2420h4.c
+++ b/board/omap2420h4/omap2420h4.c
@@ -33,7 +33,7 @@
 #include <asm/mach-types.h>
 #if defined(CONFIG_CMD_NAND)
 #include <linux/mtd/nand_legacy.h>
-extern struct nand_chip nand_dev_desc[CFG_MAX_NAND_DEVICE];
+extern struct nand_chip nand_dev_desc[CONFIG_SYS_MAX_NAND_DEVICE];
 #endif
 
 DECLARE_GLOBAL_DATA_PTR;
@@ -201,7 +201,7 @@ int dram_init (void)
 	u8 vmode_on = 0x8C;
 	#define NOT_EARLY 0
 
-	i2c_init (CFG_I2C_SPEED, CFG_I2C_SLAVE); /* need this a bit early */
+	i2c_init (CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE); /* need this a bit early */
 
 	btype = get_board_type();
 	mtype = get_mem_type();
@@ -267,7 +267,7 @@ void peripheral_enable(void)
 	__raw_writel(v, CM_CLKSEL2_CORE);
 	__raw_writel(0x1, CM_CLKSEL_WKUP);
 
-#ifdef CFG_NS16550
+#ifdef CONFIG_SYS_NS16550
 	/* Enable UART1 clock */
 	func_clks |= BIT21;
 	if_clks |= BIT21;
@@ -852,16 +852,16 @@ void nand_init(void)
 {
     extern flash_info_t flash_info[];
 
-    nand_probe(CFG_NAND_ADDR);
+    nand_probe(CONFIG_SYS_NAND_ADDR);
     if (nand_dev_desc[0].ChipID != NAND_ChipID_UNKNOWN) {
 		print_size(nand_dev_desc[0].totlen, "\n");
     }
 
-#ifdef CFG_JFFS2_MEM_NAND
-    flash_info[CFG_JFFS2_FIRST_BANK].flash_id = nand_dev_desc[0].id;
-    flash_info[CFG_JFFS2_FIRST_BANK].size = 1024*1024*2;      /* only read kernel single meg partition */
-	flash_info[CFG_JFFS2_FIRST_BANK].sector_count = 1024;   /* 1024 blocks in 16meg chip (use less for raw/copied partition) */
-    flash_info[CFG_JFFS2_FIRST_BANK].start[0] = 0x80200000; /* ?, ram for now, open question, copy to RAM or adapt for NAND */
+#ifdef CONFIG_SYS_JFFS2_MEM_NAND
+    flash_info[CONFIG_SYS_JFFS2_FIRST_BANK].flash_id = nand_dev_desc[0].id;
+    flash_info[CONFIG_SYS_JFFS2_FIRST_BANK].size = 1024*1024*2;      /* only read kernel single meg partition */
+	flash_info[CONFIG_SYS_JFFS2_FIRST_BANK].sector_count = 1024;   /* 1024 blocks in 16meg chip (use less for raw/copied partition) */
+    flash_info[CONFIG_SYS_JFFS2_FIRST_BANK].start[0] = 0x80200000; /* ?, ram for now, open question, copy to RAM or adapt for NAND */
 #endif
 }
 #endif
diff --git a/board/omap2420h4/u-boot.lds b/board/omap2420h4/u-boot.lds
index aae716cb2..89e627b4a 100644
--- a/board/omap2420h4/u-boot.lds
+++ b/board/omap2420h4/u-boot.lds
@@ -54,6 +54,6 @@ SECTIONS
 
 	. = ALIGN(4);
 	__bss_start = .;
-	.bss (NOLOAD) : { *(.bss) }
+	.bss (NOLOAD) : { *(.bss) . = ALIGN(4); }
 	_end = .;
 }
diff --git a/board/omap5912osk/u-boot.lds b/board/omap5912osk/u-boot.lds
index 9a34e46ee..0bf6eff8c 100644
--- a/board/omap5912osk/u-boot.lds
+++ b/board/omap5912osk/u-boot.lds
@@ -47,6 +47,6 @@ SECTIONS
 
 	. = ALIGN(4);
 	__bss_start = .;
-	.bss (NOLOAD) : { *(.bss) }
+	.bss (NOLOAD) : { *(.bss) . = ALIGN(4); }
 	_end = .;
 }
diff --git a/board/omap730p2/flash.c b/board/omap730p2/flash.c
index e7d65157f..5b56b9839 100644
--- a/board/omap730p2/flash.c
+++ b/board/omap730p2/flash.c
@@ -32,7 +32,7 @@
 #include <linux/byteorder/swab.h>
 
 #define PHYS_FLASH_SECT_SIZE	0x00020000	/* 256 KB sectors (x2) */
-flash_info_t flash_info[CFG_MAX_FLASH_BANKS];	/* info for FLASH chips    */
+flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];	/* info for FLASH chips    */
 
 /* Board support for 1 or 2 flash devices */
 #undef FLASH_PORT_WIDTH32
@@ -88,7 +88,7 @@ unsigned long flash_init (void)
 {
 	int i;
 	ulong size = 0;
-	for (i = 0; i < CFG_MAX_FLASH_BANKS; i++) {
+	for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) {
 		switch (i) {
 		case 0:
 			flash_get_size ((FPW *) PHYS_FLASH_1, &flash_info[i]);
@@ -104,12 +104,12 @@ unsigned long flash_init (void)
 	/* Protect monitor and environment sectors
 	 */
 	flash_protect (FLAG_PROTECT_SET,
-			CFG_FLASH_BASE,
-			CFG_FLASH_BASE + monitor_flash_len - 1, &flash_info[0]);
+			CONFIG_SYS_FLASH_BASE,
+			CONFIG_SYS_FLASH_BASE + monitor_flash_len - 1, &flash_info[0]);
 
 	flash_protect (FLAG_PROTECT_SET,
-			CFG_ENV_ADDR,
-			CFG_ENV_ADDR + CFG_ENV_SIZE - 1, &flash_info[0]);
+			CONFIG_ENV_ADDR,
+			CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1, &flash_info[0]);
 
 	return size;
 }
@@ -227,10 +227,10 @@ static ulong flash_get_size (FPW * addr, flash_info_t * info)
 		break;
 	}
 
-	if (info->sector_count > CFG_MAX_FLASH_SECT) {
+	if (info->sector_count > CONFIG_SYS_MAX_FLASH_SECT) {
 		printf ("** ERROR: sector count %d > max (%d) **\n",
-				info->sector_count, CFG_MAX_FLASH_SECT);
-		info->sector_count = CFG_MAX_FLASH_SECT;
+				info->sector_count, CONFIG_SYS_MAX_FLASH_SECT);
+		info->sector_count = CONFIG_SYS_MAX_FLASH_SECT;
 	}
 
 	addr[0] = (FPW) 0x00FF00FF;	/* restore read mode */
@@ -322,7 +322,7 @@ int flash_erase (flash_info_t * info, int s_first, int s_last)
 				*addr) & (FPW) 0x00800080) !=
 				(FPW) 0x00800080) {
 					if (get_timer_masked () >
-					CFG_FLASH_ERASE_TOUT) {
+					CONFIG_SYS_FLASH_ERASE_TOUT) {
 					printf ("Timeout\n");
 					/* suspend erase     */
 					*addr = (FPW) 0x00B000B0;
@@ -458,7 +458,7 @@ static int write_data (flash_info_t * info, ulong dest, FPW data)
 
 	/* wait while polling the status register */
 	while (((status = *addr) & (FPW) 0x00800080) != (FPW) 0x00800080) {
-		if (get_timer_masked () > CFG_FLASH_WRITE_TOUT) {
+		if (get_timer_masked () > CONFIG_SYS_FLASH_WRITE_TOUT) {
 			*addr = (FPW) 0x00FF00FF;	/* restore read mode */
 			return (1);
 		}
diff --git a/board/omap730p2/u-boot.lds b/board/omap730p2/u-boot.lds
index a4fcd1a9b..d86eb3621 100644
--- a/board/omap730p2/u-boot.lds
+++ b/board/omap730p2/u-boot.lds
@@ -47,6 +47,6 @@ SECTIONS
 
 	. = ALIGN(4);
 	__bss_start = .;
-	.bss (NOLOAD) : { *(.bss) }
+	.bss (NOLOAD) : { *(.bss) . = ALIGN(4); }
 	_end = .;
 }
diff --git a/board/oxc/flash.c b/board/oxc/flash.c
index 296c01dc8..36e0fcac7 100644
--- a/board/oxc/flash.c
+++ b/board/oxc/flash.c
@@ -31,7 +31,7 @@
 #include <common.h>
 #include <mpc8xx.h>
 
-flash_info_t	flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips	*/
+flash_info_t	flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips	*/
 
 /*-----------------------------------------------------------------------
  * Functions
@@ -49,7 +49,7 @@ unsigned long flash_init (void)
     int i;
 
     /* Init: no FLASHes known */
-    for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) {
+    for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
 	flash_info[i].flash_id = FLASH_UNKNOWN;
     }
 
@@ -59,27 +59,27 @@ unsigned long flash_init (void)
      * and the size of flash using 0xFF800000 as the base address,
      * and then call flash_get_size() again to fill flash_info.
      */
-    size = flash_get_size((vu_char *)CFG_FLASH_PRELIMBASE, &flash_info[0]);
+    size = flash_get_size((vu_char *)CONFIG_SYS_FLASH_PRELIMBASE, &flash_info[0]);
     if (size)
     {
 	flash_get_size((vu_char *)(-size), &flash_info[0]);
     }
 
-#if (CFG_MONITOR_BASE >= CFG_FLASH_PRELIMBASE)
+#if (CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_PRELIMBASE)
     /* monitor protection ON by default */
     flash_protect(FLAG_PROTECT_SET,
-		  CFG_MONITOR_BASE,
-		  CFG_MONITOR_BASE+monitor_flash_len-1,
+		  CONFIG_SYS_MONITOR_BASE,
+		  CONFIG_SYS_MONITOR_BASE+monitor_flash_len-1,
 		  &flash_info[0]);
 #endif
 
-#if (CFG_ENV_IS_IN_FLASH == 1) && defined(CFG_ENV_ADDR)
-# ifndef  CFG_ENV_SIZE
-#  define CFG_ENV_SIZE	CFG_ENV_SECT_SIZE
+#if defined(CONFIG_ENV_IS_IN_FLASH) && defined(CONFIG_ENV_ADDR)
+# ifndef  CONFIG_ENV_SIZE
+#  define CONFIG_ENV_SIZE	CONFIG_ENV_SECT_SIZE
 # endif
     flash_protect(FLAG_PROTECT_SET,
-		  CFG_ENV_ADDR,
-		  CFG_ENV_ADDR + CFG_ENV_SIZE - 1,
+		  CONFIG_ENV_ADDR,
+		  CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1,
 		  &flash_info[0]);
 #endif
 
@@ -286,7 +286,7 @@ int	flash_erase (flash_info_t *info, int s_first, int s_last)
     last  = start;
     addr = (vu_char *)(info->start[l_sect]);
     while ((addr[0] & 0x80) != 0x80) {
-	if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+	if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
 	    printf ("Timeout\n");
 	    return 1;
 	}
@@ -361,7 +361,7 @@ static int write_byte (flash_info_t *info, ulong dest, uchar data)
     /* data polling for D7 */
     start = get_timer (0);
     while ((*((vu_char *)dest) & 0x80) != (data & 0x80)) {
-	if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+	if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
 	    return (1);
 	}
     }
diff --git a/board/oxc/oxc.c b/board/oxc/oxc.c
index b61d39951..1a2bdf430 100644
--- a/board/oxc/oxc.c
+++ b/board/oxc/oxc.c
@@ -25,6 +25,7 @@
 #include <mpc824x.h>
 #include <pci.h>
 #include <i2c.h>
+#include <netdev.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -36,13 +37,13 @@ int checkboard (void)
 
 phys_size_t initdram (int board_type)
 {
-#ifndef CFG_RAMBOOT
+#ifndef CONFIG_SYS_RAMBOOT
 	long size;
 	long new_bank0_end;
 	long mear1;
 	long emear1;
 
-	size = get_ram_size(CFG_SDRAM_BASE, CFG_MAX_RAM_SIZE);
+	size = get_ram_size(CONFIG_SYS_SDRAM_BASE, CONFIG_SYS_MAX_RAM_SIZE);
 
 	new_bank0_end = size - 1;
 	mear1 = mpc824x_mpc107_getreg(MEAR1);
@@ -91,14 +92,14 @@ void pci_init_board (void)
 
 int board_early_init_f (void)
 {
-	*(volatile unsigned char *)(CFG_CPLD_RESET) = 0x89;
+	*(volatile unsigned char *)(CONFIG_SYS_CPLD_RESET) = 0x89;
 	return 0;
 }
 
 #ifdef CONFIG_WATCHDOG
 void oxc_wdt_reset(void)
 {
-	*(volatile unsigned char *)(CFG_CPLD_WATCHDOG) = 0xff;
+	*(volatile unsigned char *)(CONFIG_SYS_CPLD_WATCHDOG) = 0xff;
 }
 
 void watchdog_reset(void)
@@ -134,7 +135,7 @@ void oxc_toggle_activeled(void)
 
 void board_show_activity (ulong timestamp)
 {
-	if ((timestamp % (CFG_HZ / 10)) == 0)
+	if ((timestamp % (CONFIG_SYS_HZ / 10)) == 0)
 		oxc_toggle_activeled ();
 }
 
@@ -147,9 +148,9 @@ void show_activity(int arg)
 
 	if ((ledtoggle > (2 * arg)) && ledstatus) {
 		led ^= 0x80;
-		oxc_get_expander(CFG_I2C_EXPANDER0_ADDR, &val);
+		oxc_get_expander(CONFIG_SYS_I2C_EXPANDER0_ADDR, &val);
 		udelay(200);
-		oxc_set_expander(CFG_I2C_EXPANDER0_ADDR, (val & 0x7F) | led);
+		oxc_set_expander(CONFIG_SYS_I2C_EXPANDER0_ADDR, (val & 0x7F) | led);
 		ledtoggle = 0;
 	}
 }
@@ -164,13 +165,13 @@ void show_boot_progress(int arg)
 
 	if (arg > 0 && ledstatus) {
 		ledstatus = 0;
-		oxc_get_expander(CFG_I2C_EXPANDER0_ADDR, &val);
+		oxc_get_expander(CONFIG_SYS_I2C_EXPANDER0_ADDR, &val);
 		udelay(200);
-		oxc_set_expander(CFG_I2C_EXPANDER0_ADDR, val | 0x80);
+		oxc_set_expander(CONFIG_SYS_I2C_EXPANDER0_ADDR, val | 0x80);
 	} else if (arg < 0) {
-		oxc_get_expander(CFG_I2C_EXPANDER0_ADDR, &val);
+		oxc_get_expander(CONFIG_SYS_I2C_EXPANDER0_ADDR, &val);
 		udelay(200);
-		oxc_set_expander(CFG_I2C_EXPANDER0_ADDR, val & 0x7F);
+		oxc_set_expander(CONFIG_SYS_I2C_EXPANDER0_ADDR, val & 0x7F);
 		ledstatus = 1;
 	}
 }
@@ -179,21 +180,21 @@ void show_boot_progress(int arg)
 int misc_init_r (void)
 {
 	/* check whether the i2c expander #0 is accessible */
-	if (!oxc_set_expander(CFG_I2C_EXPANDER0_ADDR, 0x7F)) {
+	if (!oxc_set_expander(CONFIG_SYS_I2C_EXPANDER0_ADDR, 0x7F)) {
 		udelay(200);
 		expander0alive = 1;
 	}
 
-#ifdef CFG_OXC_GENERATE_IP
+#ifdef CONFIG_SYS_OXC_GENERATE_IP
 	{
 		char str[32];
-		unsigned long ip = CFG_OXC_IPMASK;
+		unsigned long ip = CONFIG_SYS_OXC_IPMASK;
 		bd_t *bd = gd->bd;
 
 		if (expander0alive) {
 			unsigned char val;
 
-			if (!oxc_get_expander(CFG_I2C_EXPANDER0_ADDR, &val)) {
+			if (!oxc_get_expander(CONFIG_SYS_I2C_EXPANDER0_ADDR, &val)) {
 				ip = (ip & 0xffffff00) | ((val & 0x7c) >> 2);
 			}
 		}
@@ -215,3 +216,8 @@ int misc_init_r (void)
 #endif
 	return (0);
 }
+
+int board_eth_init(bd_t *bis)
+{
+	return pci_eth_init(bis);
+}
diff --git a/board/pb1x00/flash.c b/board/pb1x00/flash.c
index 3cf29e844..a2fed1d71 100644
--- a/board/pb1x00/flash.c
+++ b/board/pb1x00/flash.c
@@ -23,7 +23,7 @@
 
 #include <common.h>
 
-flash_info_t flash_info[CFG_MAX_FLASH_BANKS];	/* info for FLASH chips */
+flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];	/* info for FLASH chips */
 
 /*-----------------------------------------------------------------------
  * flash_init()
diff --git a/board/pb1x00/pb1x00.c b/board/pb1x00/pb1x00.c
index 82e2613e2..773e446c0 100644
--- a/board/pb1x00/pb1x00.c
+++ b/board/pb1x00/pb1x00.c
@@ -100,19 +100,19 @@ int checkboard (void)
 	/* We dont need theese unless we run whole pcmcia package */
 	write_one_tlb(20,                 /* index */
 		      0x01ffe000,         /* Pagemask, 16 MB pages */
-		      CFG_PCMCIA_IO_BASE, /* Hi */
+		      CONFIG_SYS_PCMCIA_IO_BASE, /* Hi */
 		      0x3C000017,         /* Lo0 */
 		      0x3C200017);        /* Lo1 */
 
 	write_one_tlb(21,                   /* index */
 		      0x01ffe000,           /* Pagemask, 16 MB pages */
-		      CFG_PCMCIA_ATTR_BASE, /* Hi */
+		      CONFIG_SYS_PCMCIA_ATTR_BASE, /* Hi */
 		      0x3D000017,           /* Lo0 */
 		      0x3D200017);          /* Lo1 */
 #endif	/* 0 */
 	write_one_tlb(22,                   /* index */
 		      0x01ffe000,           /* Pagemask, 16 MB pages */
-		      CFG_PCMCIA_MEM_ADDR,  /* Hi */
+		      CONFIG_SYS_PCMCIA_MEM_ADDR,  /* Hi */
 		      0x3E000017,           /* Lo0 */
 		      0x3E200017);          /* Lo1 */
 #endif	/* CONFIG_IDE_PCMCIA */
diff --git a/board/pb1x00/u-boot.lds b/board/pb1x00/u-boot.lds
index 1e1c5590d..da20de1ad 100644
--- a/board/pb1x00/u-boot.lds
+++ b/board/pb1x00/u-boot.lds
@@ -65,6 +65,6 @@ SECTIONS
 
 	. = ALIGN(4);
 	.sbss (NOLOAD)  : { *(.sbss) }
-	.bss (NOLOAD)  : { *(.bss) }
+	.bss (NOLOAD)  : { *(.bss) . = ALIGN(4); }
 	uboot_end = .;
 }
diff --git a/board/pcippc2/cpc710_init_ram.c b/board/pcippc2/cpc710_init_ram.c
index 171f06c58..8945351a4 100644
--- a/board/pcippc2/cpc710_init_ram.c
+++ b/board/pcippc2/cpc710_init_ram.c
@@ -81,7 +81,7 @@ unsigned long cpc710_ram_init (void)
 	unsigned long bank_size;
 	u32 mcer;
 
-#ifndef CFG_RAMBOOT
+#ifndef CONFIG_SYS_RAMBOOT
 	/* Clear memory banks
 	 */
 	out32 (REG (SDRAM0, MCER0), 0);
@@ -107,14 +107,14 @@ unsigned long cpc710_ram_init (void)
 		hang ();
 	}
 	memsize += bank_size;
-#ifndef CFG_RAMBOOT
+#ifndef CONFIG_SYS_RAMBOOT
 	/* Enable bank, zero start
 	 */
 	out32 (REG (SDRAM0, MCER0), mcer | 0x80000000);
 	iobarrier_rw ();
 #endif
 
-#ifndef CFG_RAMBOOT
+#ifndef CONFIG_SYS_RAMBOOT
 	/* Enable memory
 	 */
 	out32 (REG (SDRAM0, MCCR), in32 (REG (SDRAM0, MCCR)) | 0x80000000);
diff --git a/board/pcippc2/flash.c b/board/pcippc2/flash.c
index 8c01415fa..ec604e0d6 100644
--- a/board/pcippc2/flash.c
+++ b/board/pcippc2/flash.c
@@ -39,7 +39,7 @@
 #endif
 /*---------------------------------------------------------------------*/
 
-flash_info_t	flash_info[CFG_MAX_FLASH_BANKS];
+flash_info_t	flash_info[CONFIG_SYS_MAX_FLASH_BANKS];
 
 static ulong flash_get_size (ulong addr, flash_info_t *info);
 static int flash_get_offsets (ulong base, flash_info_t *info);
@@ -52,33 +52,33 @@ unsigned long flash_init (void)
 	unsigned long flash_size = 0;
 
 	/* Init: no FLASHes known */
-	for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) {
+	for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
 		flash_info[i].flash_id = FLASH_UNKNOWN;
 		flash_info[i].sector_count = 0;
 		flash_info[i].size = 0;
 	}
 
-	DEBUGF("\n## Get flash size @ 0x%08x\n", CFG_FLASH_BASE);
+	DEBUGF("\n## Get flash size @ 0x%08x\n", CONFIG_SYS_FLASH_BASE);
 
-	flash_size = flash_get_size (CFG_FLASH_BASE, flash_info);
+	flash_size = flash_get_size (CONFIG_SYS_FLASH_BASE, flash_info);
 
 	DEBUGF("## Flash bank size: %08lx\n", flash_size);
 
 	if (flash_size) {
-#if CFG_MONITOR_BASE >= CFG_FLASH_BASE && \
-    CFG_MONITOR_BASE < CFG_FLASH_BASE + CFG_FLASH_MAX_SIZE
+#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE && \
+    CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE + CONFIG_SYS_FLASH_MAX_SIZE
 		/* monitor protection ON by default */
 		flash_protect(FLAG_PROTECT_SET,
-			      CFG_MONITOR_BASE,
-			      CFG_MONITOR_BASE + monitor_flash_len - 1,
+			      CONFIG_SYS_MONITOR_BASE,
+			      CONFIG_SYS_MONITOR_BASE + monitor_flash_len - 1,
 			      &flash_info[0]);
 #endif
 
-#ifdef CFG_ENV_IS_IN_FLASH
+#ifdef CONFIG_ENV_IS_IN_FLASH
 		/* ENV protection ON by default */
 		flash_protect(FLAG_PROTECT_SET,
-			      CFG_ENV_ADDR,
-			      CFG_ENV_ADDR + CFG_ENV_SECT_SIZE - 1,
+			      CONFIG_ENV_ADDR,
+			      CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE - 1,
 			      &flash_info[0]);
 #endif
 
@@ -231,10 +231,10 @@ static ulong flash_get_size (ulong addr, flash_info_t *info)
 
 	}
 
-	if (info->sector_count > CFG_MAX_FLASH_SECT) {
+	if (info->sector_count > CONFIG_SYS_MAX_FLASH_SECT) {
 		printf ("** ERROR: sector count %d > max (%d) **\n",
-			info->sector_count, CFG_MAX_FLASH_SECT);
-		info->sector_count = CFG_MAX_FLASH_SECT;
+			info->sector_count, CONFIG_SYS_MAX_FLASH_SECT);
+		info->sector_count = CONFIG_SYS_MAX_FLASH_SECT;
 	}
 
 	if (! flash_get_offsets (addr, info)) {
@@ -356,10 +356,10 @@ int flash_erase (flash_info_t *info, int s_first, int s_last)
 	last  = start;
 	addr = info->start[l_sect];
 
-	DEBUGF ("Start erase timeout: %d\n", CFG_FLASH_ERASE_TOUT);
+	DEBUGF ("Start erase timeout: %d\n", CONFIG_SYS_FLASH_ERASE_TOUT);
 
 	while ((in8(addr) & 0x80) != 0x80) {
-		if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+		if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
 			printf ("Timeout\n");
 			flash_reset (info->start[0]);
 			return 1;
@@ -488,7 +488,7 @@ static int write_word (flash_info_t *info, ulong dest, ulong data)
 		/* data polling for D7 */
 		start = get_timer (0);
 		while ((in8(dest+i) & 0x80) != (data_ch[i] & 0x80)) {
-			if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+			if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
 				flash_reset (addr);
 				return (1);
 			}
diff --git a/board/pcippc2/i2c.c b/board/pcippc2/i2c.c
index 36b1d0f44..ab52562e6 100644
--- a/board/pcippc2/i2c.c
+++ b/board/pcippc2/i2c.c
@@ -85,7 +85,7 @@ static inline void i2c_udelay (
 {
   int			v;
 
-  asm volatile("mtdec %0" : : "r" (time * ((CFG_BUS_CLK / 4) / 1000000)));
+  asm volatile("mtdec %0" : : "r" (time * ((CONFIG_SYS_BUS_CLK / 4) / 1000000)));
 
   do
   {
diff --git a/board/pcippc2/pcippc2.c b/board/pcippc2/pcippc2.c
index c1917c11b..a3dbdc846 100644
--- a/board/pcippc2/pcippc2.c
+++ b/board/pcippc2/pcippc2.c
@@ -28,6 +28,7 @@
 #include <linux/mtd/doc2000.h>
 #include <watchdog.h>
 #include <pci.h>
+#include <netdev.h>
 
 #include "hardware.h"
 #include "pcippc2.h"
@@ -243,3 +244,8 @@ U_BOOT_CMD(
 
 #endif
 #endif	/* CONFIG_WATCHDOG */
+
+int board_eth_init(bd_t *bis)
+{
+	return pci_eth_init(bis);
+}
diff --git a/board/pcippc2/sconsole.c b/board/pcippc2/sconsole.c
index 3b190699f..6ef38f437 100644
--- a/board/pcippc2/sconsole.c
+++ b/board/pcippc2/sconsole.c
@@ -41,7 +41,7 @@ int serial_init (void)
 	sb->pos  = 0;
 	sb->size = 0;
 	sb->baud = gd->baudrate;
-	sb->max_size = CFG_SCONSOLE_SIZE - sizeof (sconsole_buffer_t);
+	sb->max_size = CONFIG_SYS_SCONSOLE_SIZE - sizeof (sconsole_buffer_t);
 
 	return (0);
 }
diff --git a/board/pcippc2/sconsole.h b/board/pcippc2/sconsole.h
index 5d850a589..ff0ccabcd 100644
--- a/board/pcippc2/sconsole.h
+++ b/board/pcippc2/sconsole.h
@@ -34,7 +34,7 @@ typedef struct sconsole_buffer_s {
 	char data[1];
 } sconsole_buffer_t;
 
-#define SCONSOLE_BUFFER		((sconsole_buffer_t *) CFG_SCONSOLE_ADDR)
+#define SCONSOLE_BUFFER		((sconsole_buffer_t *) CONFIG_SYS_SCONSOLE_ADDR)
 
 extern void	(* sconsole_putc)	(char);
 extern void	(* sconsole_puts)	(const char *);
diff --git a/board/pcippc2/u-boot.lds b/board/pcippc2/u-boot.lds
index ebb1b6d46..53951083c 100644
--- a/board/pcippc2/u-boot.lds
+++ b/board/pcippc2/u-boot.lds
@@ -63,7 +63,7 @@ SECTIONS
 
 /* store the environment in a seperate sector in the boot flash */
 /*    . = env_offset; */
-/*    common/environment.o(.text) */
+/*    common/env_embedded.o(.text) */
 
     *(.text)
     *(.fixup)
@@ -134,6 +134,7 @@ SECTIONS
    *(.dynbss)
    *(.bss)
    *(COMMON)
+   . = ALIGN(4);
   }
   _end = . ;
   PROVIDE (end = .);
diff --git a/board/pcs440ep/config.mk b/board/pcs440ep/config.mk
index 4d942ebc7..0844e98e8 100644
--- a/board/pcs440ep/config.mk
+++ b/board/pcs440ep/config.mk
@@ -43,5 +43,5 @@ PLATFORM_CPPFLAGS += -DDEBUG
 endif
 
 ifeq ($(dbcr),1)
-PLATFORM_CPPFLAGS += -DCFG_INIT_DBCR=0x8cff0000
+PLATFORM_CPPFLAGS += -DCONFIG_SYS_INIT_DBCR=0x8cff0000
 endif
diff --git a/board/pcs440ep/flash.c b/board/pcs440ep/flash.c
index c5a62e254..f90a22112 100644
--- a/board/pcs440ep/flash.c
+++ b/board/pcs440ep/flash.c
@@ -24,13 +24,13 @@
 #include <common.h>
 #include <asm/processor.h>
 
-#ifndef CFG_FLASH_READ0
-#define CFG_FLASH_READ0		0x0000	/* 0 is standard			*/
-#define CFG_FLASH_READ1		0x0001	/* 1 is standard			*/
-#define CFG_FLASH_READ2		0x0002	/* 2 is standard			*/
+#ifndef CONFIG_SYS_FLASH_READ0
+#define CONFIG_SYS_FLASH_READ0		0x0000	/* 0 is standard			*/
+#define CONFIG_SYS_FLASH_READ1		0x0001	/* 1 is standard			*/
+#define CONFIG_SYS_FLASH_READ2		0x0002	/* 2 is standard			*/
 #endif
 
-flash_info_t	flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips	*/
+flash_info_t	flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips	*/
 
 /*
  * Functions
@@ -45,7 +45,7 @@ unsigned long flash_init(void)
 	unsigned long base_b0, base_b1;
 
 	/* Init: no FLASHes known */
-	for (i = 0; i < CFG_MAX_FLASH_BANKS; ++i) {
+	for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
 		flash_info[i].flash_id = FLASH_UNKNOWN;
 	}
 
@@ -130,7 +130,7 @@ void flash_print_info(flash_info_t *info)
 
 	printf ("  Sector Start Addresses:");
 	for (i=0; i<info->sector_count; ++i) {
-#ifdef CFG_FLASH_EMPTY_INFO
+#ifdef CONFIG_SYS_FLASH_EMPTY_INFO
 		/*
 		 * Check if whole sector is erased
 		 */
@@ -175,34 +175,34 @@ static ulong flash_get_size(vu_long *addr, flash_info_t *info)
 {
 	short i;
 	short n;
-	volatile CFG_FLASH_WORD_SIZE value;
+	volatile CONFIG_SYS_FLASH_WORD_SIZE value;
 	ulong base = (ulong)addr;
-	volatile CFG_FLASH_WORD_SIZE *addr2 = (volatile CFG_FLASH_WORD_SIZE *)addr;
+	volatile CONFIG_SYS_FLASH_WORD_SIZE *addr2 = (volatile CONFIG_SYS_FLASH_WORD_SIZE *)addr;
 
 	/* Write auto select command: read Manufacturer ID */
-	addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE)0x00AA00AA;
-	addr2[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE)0x00550055;
-	addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE)0x00900090;
+	addr2[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE)0x00AA00AA;
+	addr2[CONFIG_SYS_FLASH_ADDR1] = (CONFIG_SYS_FLASH_WORD_SIZE)0x00550055;
+	addr2[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE)0x00900090;
 
-	value = addr2[CFG_FLASH_READ0];
+	value = addr2[CONFIG_SYS_FLASH_READ0];
 
 	switch (value) {
-	case (CFG_FLASH_WORD_SIZE)AMD_MANUFACT:
+	case (CONFIG_SYS_FLASH_WORD_SIZE)AMD_MANUFACT:
 		info->flash_id = FLASH_MAN_AMD;
 		break;
-	case (CFG_FLASH_WORD_SIZE)FUJ_MANUFACT:
+	case (CONFIG_SYS_FLASH_WORD_SIZE)FUJ_MANUFACT:
 		info->flash_id = FLASH_MAN_FUJ;
 		break;
-	case (CFG_FLASH_WORD_SIZE)SST_MANUFACT:
+	case (CONFIG_SYS_FLASH_WORD_SIZE)SST_MANUFACT:
 		info->flash_id = FLASH_MAN_SST;
 		break;
-	case (CFG_FLASH_WORD_SIZE)STM_MANUFACT:
+	case (CONFIG_SYS_FLASH_WORD_SIZE)STM_MANUFACT:
 		info->flash_id = FLASH_MAN_STM;
 		break;
-	case (CFG_FLASH_WORD_SIZE)EXCEL_MANUFACT:
+	case (CONFIG_SYS_FLASH_WORD_SIZE)EXCEL_MANUFACT:
 		info->flash_id = FLASH_MAN_EXCEL;
 		break;
-	case (CFG_FLASH_WORD_SIZE)MX_MANUFACT:
+	case (CONFIG_SYS_FLASH_WORD_SIZE)MX_MANUFACT:
 		info->flash_id = FLASH_MAN_MX;
 		break;
 	default:
@@ -212,99 +212,99 @@ static ulong flash_get_size(vu_long *addr, flash_info_t *info)
 		return (0);			/* no or unknown flash	*/
 	}
 
-	value = addr2[CFG_FLASH_READ1];		/* device ID	*/
+	value = addr2[CONFIG_SYS_FLASH_READ1];		/* device ID	*/
 
 	switch (value) {
-	case (CFG_FLASH_WORD_SIZE)AMD_ID_LV400T:
+	case (CONFIG_SYS_FLASH_WORD_SIZE)AMD_ID_LV400T:
 		info->flash_id += FLASH_AM400T;
 		info->sector_count = 11;
 		info->size = 0x00080000;
 		break;				/* => 0.5 MB	*/
 
-	case (CFG_FLASH_WORD_SIZE)AMD_ID_LV400B:
+	case (CONFIG_SYS_FLASH_WORD_SIZE)AMD_ID_LV400B:
 		info->flash_id += FLASH_AM400B;
 		info->sector_count = 11;
 		info->size = 0x00080000;
 		break;				/* => 0.5 MB	*/
 
-	case (CFG_FLASH_WORD_SIZE)AMD_ID_LV040B:
+	case (CONFIG_SYS_FLASH_WORD_SIZE)AMD_ID_LV040B:
 		info->flash_id += FLASH_AM040;
 		info->sector_count = 8;
 		info->size = 0x0080000;		/* => 0.5 MB	*/
 		break;
-	case (CFG_FLASH_WORD_SIZE)STM_ID_M29W040B:
+	case (CONFIG_SYS_FLASH_WORD_SIZE)STM_ID_M29W040B:
 		info->flash_id += FLASH_AM040;
 		info->sector_count = 8;
 		info->size = 0x0080000; /* => 0,5 MB */
 		break;
 
-	case (CFG_FLASH_WORD_SIZE)AMD_ID_LV800T:
+	case (CONFIG_SYS_FLASH_WORD_SIZE)AMD_ID_LV800T:
 		info->flash_id += FLASH_AM800T;
 		info->sector_count = 19;
 		info->size = 0x00100000;
 		break;				/* => 1 MB	*/
 
-	case (CFG_FLASH_WORD_SIZE)AMD_ID_LV800B:
+	case (CONFIG_SYS_FLASH_WORD_SIZE)AMD_ID_LV800B:
 		info->flash_id += FLASH_AM800B;
 		info->sector_count = 19;
 		info->size = 0x00100000;
 		break;				/* => 1 MB	*/
 
-	case (CFG_FLASH_WORD_SIZE)AMD_ID_LV160T:
+	case (CONFIG_SYS_FLASH_WORD_SIZE)AMD_ID_LV160T:
 		info->flash_id += FLASH_AM160T;
 		info->sector_count = 35;
 		info->size = 0x00200000;
 		break;				/* => 2 MB	*/
 
-	case (CFG_FLASH_WORD_SIZE)AMD_ID_LV160B:
+	case (CONFIG_SYS_FLASH_WORD_SIZE)AMD_ID_LV160B:
 		info->flash_id += FLASH_AM160B;
 		info->sector_count = 35;
 		info->size = 0x00200000;
 		break;				/* => 2 MB	*/
 
-	case (CFG_FLASH_WORD_SIZE)AMD_ID_LV320T:
+	case (CONFIG_SYS_FLASH_WORD_SIZE)AMD_ID_LV320T:
 		info->flash_id += FLASH_AM320T;
 		info->sector_count = 71;
 		info->size = 0x00400000;
 		break;				/* => 4 MB	*/
 
-	case (CFG_FLASH_WORD_SIZE)AMD_ID_LV320B:
+	case (CONFIG_SYS_FLASH_WORD_SIZE)AMD_ID_LV320B:
 		info->flash_id += FLASH_AM320B;
 		info->sector_count = 71;
 		info->size = 0x00400000;
 		break;				/* => 4 MB	*/
 
-	case (CFG_FLASH_WORD_SIZE)AMD_ID_DL322T:
+	case (CONFIG_SYS_FLASH_WORD_SIZE)AMD_ID_DL322T:
 		info->flash_id += FLASH_AMDL322T;
 		info->sector_count = 71;
 		info->size = 0x00400000;
 		break;				/* => 4 MB	*/
 
-	case (CFG_FLASH_WORD_SIZE)AMD_ID_DL322B:
+	case (CONFIG_SYS_FLASH_WORD_SIZE)AMD_ID_DL322B:
 		info->flash_id += FLASH_AMDL322B;
 		info->sector_count = 71;
 		info->size = 0x00400000;
 		break;				/* => 4 MB	*/
 
-	case (CFG_FLASH_WORD_SIZE)AMD_ID_DL323T:
+	case (CONFIG_SYS_FLASH_WORD_SIZE)AMD_ID_DL323T:
 		info->flash_id += FLASH_AMDL323T;
 		info->sector_count = 71;
 		info->size = 0x00400000;
 		break;				/* => 4 MB	*/
 
-	case (CFG_FLASH_WORD_SIZE)AMD_ID_DL323B:
+	case (CONFIG_SYS_FLASH_WORD_SIZE)AMD_ID_DL323B:
 		info->flash_id += FLASH_AMDL323B;
 		info->sector_count = 71;
 		info->size = 0x00400000;
 		break;				/* => 4 MB	*/
 
-	case (CFG_FLASH_WORD_SIZE)SST_ID_xF020:
+	case (CONFIG_SYS_FLASH_WORD_SIZE)SST_ID_xF020:
 		info->flash_id += FLASH_SST020;
 		info->sector_count = 64;
 		info->size = 0x00040000;
 		break;				/* => 256 kB	*/
 
-	case (CFG_FLASH_WORD_SIZE)SST_ID_xF040:
+	case (CONFIG_SYS_FLASH_WORD_SIZE)SST_ID_xF040:
 		info->flash_id += FLASH_SST040;
 		info->sector_count = 128;
 		info->size = 0x00080000;
@@ -381,19 +381,19 @@ static ulong flash_get_size(vu_long *addr, flash_info_t *info)
 	for (i = 0; i < info->sector_count; i++) {
 		/* read sector protection at sector address, (A7 .. A0) = 0x02 */
 		/* D0 = 1 if protected */
-		addr2 = (volatile CFG_FLASH_WORD_SIZE *)(info->start[i]);
+		addr2 = (volatile CONFIG_SYS_FLASH_WORD_SIZE *)(info->start[i]);
 		if ((info->flash_id & FLASH_VENDMASK) != FLASH_MAN_AMD)
 			info->protect[i] = 0;
 		else
-			info->protect[i] = addr2[CFG_FLASH_READ2] & 1;
+			info->protect[i] = addr2[CONFIG_SYS_FLASH_READ2] & 1;
 	}
 
 	/*
 	 * Prevent writes to uninitialized FLASH.
 	 */
 	if (info->flash_id != FLASH_UNKNOWN) {
-		addr2 = (CFG_FLASH_WORD_SIZE *)info->start[0];
-		*addr2 = (CFG_FLASH_WORD_SIZE)0x00F000F0;	/* reset bank */
+		addr2 = (CONFIG_SYS_FLASH_WORD_SIZE *)info->start[0];
+		*addr2 = (CONFIG_SYS_FLASH_WORD_SIZE)0x00F000F0;	/* reset bank */
 	}
 
 	return (info->size);
@@ -402,8 +402,8 @@ static ulong flash_get_size(vu_long *addr, flash_info_t *info)
 
 int flash_erase(flash_info_t *info, int s_first, int s_last)
 {
-	volatile CFG_FLASH_WORD_SIZE *addr = (CFG_FLASH_WORD_SIZE *)(info->start[0]);
-	volatile CFG_FLASH_WORD_SIZE *addr2;
+	volatile CONFIG_SYS_FLASH_WORD_SIZE *addr = (CONFIG_SYS_FLASH_WORD_SIZE *)(info->start[0]);
+	volatile CONFIG_SYS_FLASH_WORD_SIZE *addr2;
 	int flag, prot, sect, l_sect;
 	ulong start, now, last;
 
@@ -438,14 +438,14 @@ int flash_erase(flash_info_t *info, int s_first, int s_last)
 	/* Start erase on unprotected sectors */
 	for (sect = s_first; sect<=s_last; sect++) {
 		if (info->protect[sect] == 0) {	/* not protected */
-			addr2 = (CFG_FLASH_WORD_SIZE *)(info->start[sect]);
+			addr2 = (CONFIG_SYS_FLASH_WORD_SIZE *)(info->start[sect]);
 			if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) {
-				addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE)0x00AA00AA;
-				addr[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE)0x00550055;
-				addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE)0x00800080;
-				addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE)0x00AA00AA;
-				addr[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE)0x00550055;
-				addr2[0] = (CFG_FLASH_WORD_SIZE)0x00300030;  /* sector erase */
+				addr[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE)0x00AA00AA;
+				addr[CONFIG_SYS_FLASH_ADDR1] = (CONFIG_SYS_FLASH_WORD_SIZE)0x00550055;
+				addr[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE)0x00800080;
+				addr[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE)0x00AA00AA;
+				addr[CONFIG_SYS_FLASH_ADDR1] = (CONFIG_SYS_FLASH_WORD_SIZE)0x00550055;
+				addr2[0] = (CONFIG_SYS_FLASH_WORD_SIZE)0x00300030;  /* sector erase */
 
 				/* re-enable interrupts if necessary */
 				if (flag) {
@@ -455,20 +455,20 @@ int flash_erase(flash_info_t *info, int s_first, int s_last)
 
 				/* data polling for D7 */
 				start = get_timer (0);
-				while ((addr2[0] & (CFG_FLASH_WORD_SIZE)0x00800080) !=
-				       (CFG_FLASH_WORD_SIZE)0x00800080) {
-					if (get_timer(start) > CFG_FLASH_WRITE_TOUT)
+				while ((addr2[0] & (CONFIG_SYS_FLASH_WORD_SIZE)0x00800080) !=
+				       (CONFIG_SYS_FLASH_WORD_SIZE)0x00800080) {
+					if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT)
 						return (1);
 				}
 			} else {
 				if (sect == s_first) {
-					addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE)0x00AA00AA;
-					addr[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE)0x00550055;
-					addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE)0x00800080;
-					addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE)0x00AA00AA;
-					addr[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE)0x00550055;
+					addr[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE)0x00AA00AA;
+					addr[CONFIG_SYS_FLASH_ADDR1] = (CONFIG_SYS_FLASH_WORD_SIZE)0x00550055;
+					addr[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE)0x00800080;
+					addr[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE)0x00AA00AA;
+					addr[CONFIG_SYS_FLASH_ADDR1] = (CONFIG_SYS_FLASH_WORD_SIZE)0x00550055;
 				}
-				addr2[0] = (CFG_FLASH_WORD_SIZE)0x00300030;  /* sector erase */
+				addr2[0] = (CONFIG_SYS_FLASH_WORD_SIZE)0x00300030;  /* sector erase */
 			}
 			l_sect = sect;
 		}
@@ -489,9 +489,9 @@ int flash_erase(flash_info_t *info, int s_first, int s_last)
 
 	start = get_timer (0);
 	last  = start;
-	addr = (CFG_FLASH_WORD_SIZE *)(info->start[l_sect]);
-	while ((addr[0] & (CFG_FLASH_WORD_SIZE)0x00800080) != (CFG_FLASH_WORD_SIZE)0x00800080) {
-		if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+	addr = (CONFIG_SYS_FLASH_WORD_SIZE *)(info->start[l_sect]);
+	while ((addr[0] & (CONFIG_SYS_FLASH_WORD_SIZE)0x00800080) != (CONFIG_SYS_FLASH_WORD_SIZE)0x00800080) {
+		if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
 			printf ("Timeout\n");
 			return 1;
 		}
@@ -504,8 +504,8 @@ int flash_erase(flash_info_t *info, int s_first, int s_last)
 
 DONE:
 	/* reset to read mode */
-	addr = (CFG_FLASH_WORD_SIZE *)info->start[0];
-	addr[0] = (CFG_FLASH_WORD_SIZE)0x00F000F0;	/* reset bank */
+	addr = (CONFIG_SYS_FLASH_WORD_SIZE *)info->start[0];
+	addr[0] = (CONFIG_SYS_FLASH_WORD_SIZE)0x00F000F0;	/* reset bank */
 
 	printf (" done\n");
 	return 0;
@@ -585,9 +585,9 @@ int write_buff(flash_info_t *info, uchar *src, ulong addr, ulong cnt)
  */
 static int write_word(flash_info_t *info, ulong dest, ulong data)
 {
-	volatile CFG_FLASH_WORD_SIZE *addr2 = (CFG_FLASH_WORD_SIZE *)(info->start[0]);
-	volatile CFG_FLASH_WORD_SIZE *dest2 = (CFG_FLASH_WORD_SIZE *)dest;
-	volatile CFG_FLASH_WORD_SIZE *data2 = (CFG_FLASH_WORD_SIZE *)&data;
+	volatile CONFIG_SYS_FLASH_WORD_SIZE *addr2 = (CONFIG_SYS_FLASH_WORD_SIZE *)(info->start[0]);
+	volatile CONFIG_SYS_FLASH_WORD_SIZE *dest2 = (CONFIG_SYS_FLASH_WORD_SIZE *)dest;
+	volatile CONFIG_SYS_FLASH_WORD_SIZE *data2 = (CONFIG_SYS_FLASH_WORD_SIZE *)&data;
 	ulong start;
 	int flag;
 	int i;
@@ -599,10 +599,10 @@ static int write_word(flash_info_t *info, ulong dest, ulong data)
 	/* Disable interrupts which might cause a timeout here */
 	flag = disable_interrupts();
 
-	for (i=0; i<4/sizeof(CFG_FLASH_WORD_SIZE); i++) {
-		addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE)0x00AA00AA;
-		addr2[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE)0x00550055;
-		addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE)0x00A000A0;
+	for (i=0; i<4/sizeof(CONFIG_SYS_FLASH_WORD_SIZE); i++) {
+		addr2[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE)0x00AA00AA;
+		addr2[CONFIG_SYS_FLASH_ADDR1] = (CONFIG_SYS_FLASH_WORD_SIZE)0x00550055;
+		addr2[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE)0x00A000A0;
 
 		dest2[i] = data2[i];
 
@@ -612,9 +612,9 @@ static int write_word(flash_info_t *info, ulong dest, ulong data)
 
 		/* data polling for D7 */
 		start = get_timer (0);
-		while ((dest2[i] & (CFG_FLASH_WORD_SIZE)0x00800080) !=
-		       (data2[i] & (CFG_FLASH_WORD_SIZE)0x00800080)) {
-			if (get_timer(start) > CFG_FLASH_WRITE_TOUT)
+		while ((dest2[i] & (CONFIG_SYS_FLASH_WORD_SIZE)0x00800080) !=
+		       (data2[i] & (CONFIG_SYS_FLASH_WORD_SIZE)0x00800080)) {
+			if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT)
 				return (1);
 		}
 	}
diff --git a/board/pcs440ep/init.S b/board/pcs440ep/init.S
index 36a40c97a..25e7f4f70 100644
--- a/board/pcs440ep/init.S
+++ b/board/pcs440ep/init.S
@@ -93,10 +93,10 @@ tlbtab:
 	 * BOOT_CS (FLASH) must be first. Before relocation SA_I can be off to use the
 	 * speed up boot process. It is patched after relocation to enable SA_I
 	 */
-	tlbentry( CFG_BOOT_BASE_ADDR, SZ_256M, CFG_BOOT_BASE_ADDR, 0, AC_R|AC_W|AC_X|SA_G/*|SA_I*/)
+	tlbentry( CONFIG_SYS_BOOT_BASE_ADDR, SZ_256M, CONFIG_SYS_BOOT_BASE_ADDR, 0, AC_R|AC_W|AC_X|SA_G/*|SA_I*/)
 
 	/* TLB-entry for init-ram in dcache (SA_I must be turned off!) */
-	tlbentry( CFG_INIT_RAM_ADDR, SZ_64K, CFG_INIT_RAM_ADDR, 0, AC_R|AC_W|AC_X|SA_G )
+	tlbentry( CONFIG_SYS_INIT_RAM_ADDR, SZ_64K, CONFIG_SYS_INIT_RAM_ADDR, 0, AC_R|AC_W|AC_X|SA_G )
 
 	/*
 	 * TLB entries for SDRAM are not needed on this platform.
@@ -104,15 +104,15 @@ tlbtab:
 	 * routine.
 	 */
 
-	tlbentry( CFG_PCI_BASE, SZ_256M, CFG_PCI_BASE, 0, AC_R|AC_W|SA_G|SA_I )
+	tlbentry( CONFIG_SYS_PCI_BASE, SZ_256M, CONFIG_SYS_PCI_BASE, 0, AC_R|AC_W|SA_G|SA_I )
 
 	/* PCI */
-	tlbentry( CFG_PCI_MEMBASE, SZ_256M, CFG_PCI_MEMBASE, 0, AC_R|AC_W|SA_G|SA_I )
-	tlbentry( CFG_PCI_MEMBASE1, SZ_256M, CFG_PCI_MEMBASE1, 0, AC_R|AC_W|SA_G|SA_I )
-	tlbentry( CFG_PCI_MEMBASE2, SZ_256M, CFG_PCI_MEMBASE2, 0, AC_R|AC_W|SA_G|SA_I )
-	tlbentry( CFG_PCI_MEMBASE3, SZ_256M, CFG_PCI_MEMBASE3, 0, AC_R|AC_W|SA_G|SA_I )
+	tlbentry( CONFIG_SYS_PCI_MEMBASE, SZ_256M, CONFIG_SYS_PCI_MEMBASE, 0, AC_R|AC_W|SA_G|SA_I )
+	tlbentry( CONFIG_SYS_PCI_MEMBASE1, SZ_256M, CONFIG_SYS_PCI_MEMBASE1, 0, AC_R|AC_W|SA_G|SA_I )
+	tlbentry( CONFIG_SYS_PCI_MEMBASE2, SZ_256M, CONFIG_SYS_PCI_MEMBASE2, 0, AC_R|AC_W|SA_G|SA_I )
+	tlbentry( CONFIG_SYS_PCI_MEMBASE3, SZ_256M, CONFIG_SYS_PCI_MEMBASE3, 0, AC_R|AC_W|SA_G|SA_I )
 
 	/* USB 2.0 Device */
-	tlbentry( CFG_USB_DEVICE, SZ_1K, 0x50000000, 0, AC_R|AC_W|SA_G|SA_I )
+	tlbentry( CONFIG_SYS_USB_DEVICE, SZ_1K, 0x50000000, 0, AC_R|AC_W|SA_G|SA_I )
 
 	tlbtab_end
diff --git a/board/pcs440ep/pcs440ep.c b/board/pcs440ep/pcs440ep.c
index f66f3f233..271005f0f 100644
--- a/board/pcs440ep/pcs440ep.c
+++ b/board/pcs440ep/pcs440ep.c
@@ -34,7 +34,7 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
-extern flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips	*/
+extern flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips	*/
 
 unsigned char	sha1_checksum[SHA1_SUM_LEN];
 
@@ -193,7 +193,7 @@ void load_sernum_ethaddr (void)
 	/* read the MACs from EEprom */
 	status_led_set (0, STATUS_LED_ON);
 	status_led_set (1, STATUS_LED_ON);
-	ret = eeprom_read (CFG_I2C_EEPROM_ADDR, 0, (uchar *)buf, EEPROM_LEN);
+	ret = eeprom_read (CONFIG_SYS_I2C_EEPROM_ADDR, 0, (uchar *)buf, EEPROM_LEN);
 	if (ret == 0) {
 		checksumcrc16 = cyg_crc16 ((uchar *)buf, EEPROM_LEN - 2);
 		/* check, if the EEprom is programmed:
@@ -379,8 +379,8 @@ static int pcs440ep_sha1 (int docheck)
 	unsigned char org[20];
 	int	i, len = CONFIG_SHA1_LEN;
 
-	memcpy ((char *)CFG_LOAD_ADDR, (char *)CONFIG_SHA1_START, len);
-	data = (unsigned char *)CFG_LOAD_ADDR;
+	memcpy ((char *)CONFIG_SYS_LOAD_ADDR, (char *)CONFIG_SHA1_START, len);
+	data = (unsigned char *)CONFIG_SYS_LOAD_ADDR;
 	ptroff = &data[len + SHA1_SUM_POS];
 
 	for (i = 0; i < SHA1_SUM_LEN; i++) {
@@ -485,14 +485,14 @@ int misc_init_r (void)
 
 	/* Monitor protection ON by default */
 	(void)flash_protect(FLAG_PROTECT_SET,
-			    -CFG_MONITOR_LEN,
+			    -CONFIG_SYS_MONITOR_LEN,
 			    0xffffffff,
 			    &flash_info[1]);
 
 	/* Env protection ON by default */
 	(void)flash_protect(FLAG_PROTECT_SET,
-			    CFG_ENV_ADDR_REDUND,
-			    CFG_ENV_ADDR_REDUND + 2*CFG_ENV_SECT_SIZE - 1,
+			    CONFIG_ENV_ADDR_REDUND,
+			    CONFIG_ENV_ADDR_REDUND + 2*CONFIG_ENV_SECT_SIZE - 1,
 			    &flash_info[1]);
 
 	pcs440ep_readinputs ();
@@ -616,7 +616,7 @@ int pci_pre_init(struct pci_controller *hose)
  *	may not be sufficient for a given board.
  *
  ************************************************************************/
-#if defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT)
+#if defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT)
 void pci_target_init(struct pci_controller *hose)
 {
 	/*--------------------------------------------------------------------------+
@@ -630,14 +630,14 @@ void pci_target_init(struct pci_controller *hose)
 	  | Make this region non-prefetchable.
 	  +--------------------------------------------------------------------------*/
 	out32r(PCIX0_PMM0MA, 0x00000000);	/* PMM0 Mask/Attribute - disabled b4 setting */
-	out32r(PCIX0_PMM0LA, CFG_PCI_MEMBASE);	/* PMM0 Local Address */
-	out32r(PCIX0_PMM0PCILA, CFG_PCI_MEMBASE);	/* PMM0 PCI Low Address */
+	out32r(PCIX0_PMM0LA, CONFIG_SYS_PCI_MEMBASE);	/* PMM0 Local Address */
+	out32r(PCIX0_PMM0PCILA, CONFIG_SYS_PCI_MEMBASE);	/* PMM0 PCI Low Address */
 	out32r(PCIX0_PMM0PCIHA, 0x00000000);	/* PMM0 PCI High Address */
 	out32r(PCIX0_PMM0MA, 0xE0000001);	/* 512M + No prefetching, and enable region */
 
 	out32r(PCIX0_PMM1MA, 0x00000000);	/* PMM0 Mask/Attribute - disabled b4 setting */
-	out32r(PCIX0_PMM1LA, CFG_PCI_MEMBASE2);	/* PMM0 Local Address */
-	out32r(PCIX0_PMM1PCILA, CFG_PCI_MEMBASE2);	/* PMM0 PCI Low Address */
+	out32r(PCIX0_PMM1LA, CONFIG_SYS_PCI_MEMBASE2);	/* PMM0 Local Address */
+	out32r(PCIX0_PMM1PCILA, CONFIG_SYS_PCI_MEMBASE2);	/* PMM0 PCI Low Address */
 	out32r(PCIX0_PMM1PCIHA, 0x00000000);	/* PMM0 PCI High Address */
 	out32r(PCIX0_PMM1MA, 0xE0000001);	/* 512M + No prefetching, and enable region */
 
@@ -652,8 +652,8 @@ void pci_target_init(struct pci_controller *hose)
 
 	/* Program the board's subsystem id/vendor id */
 	pci_write_config_word(0, PCI_SUBSYSTEM_VENDOR_ID,
-			      CFG_PCI_SUBSYS_VENDORID);
-	pci_write_config_word(0, PCI_SUBSYSTEM_ID, CFG_PCI_SUBSYS_ID);
+			      CONFIG_SYS_PCI_SUBSYS_VENDORID);
+	pci_write_config_word(0, PCI_SUBSYSTEM_ID, CONFIG_SYS_PCI_SUBSYS_ID);
 
 	/* Configure command register as bus master */
 	pci_write_config_word(0, PCI_COMMAND, PCI_COMMAND_MASTER);
@@ -667,13 +667,13 @@ void pci_target_init(struct pci_controller *hose)
 	pci_write_config_dword(0, PCI_BRDGOPT2, 0x00000101);
 
 }
-#endif				/* defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT) */
+#endif				/* defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT) */
 
 /*************************************************************************
  *  pci_master_init
  *
  ************************************************************************/
-#if defined(CONFIG_PCI) && defined(CFG_PCI_MASTER_INIT)
+#if defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_MASTER_INIT)
 void pci_master_init(struct pci_controller *hose)
 {
 	unsigned short temp_short;
@@ -688,7 +688,7 @@ void pci_master_init(struct pci_controller *hose)
 			      temp_short | PCI_COMMAND_MASTER |
 			      PCI_COMMAND_MEMORY);
 }
-#endif				/* defined(CONFIG_PCI) && defined(CFG_PCI_MASTER_INIT) */
+#endif				/* defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_MASTER_INIT) */
 
 /*************************************************************************
  *  is_pci_host
diff --git a/board/pcs440ep/u-boot.lds b/board/pcs440ep/u-boot.lds
index ed6135987..6b7dd2110 100644
--- a/board/pcs440ep/u-boot.lds
+++ b/board/pcs440ep/u-boot.lds
@@ -134,6 +134,7 @@ SECTIONS
    *(.dynbss)
    *(.bss)
    *(COMMON)
+   . = ALIGN(4);
   }
 
   _end = . ;
diff --git a/board/pleb2/flash.c b/board/pleb2/flash.c
index 5a1eba6b3..abaf0b4d2 100644
--- a/board/pleb2/flash.c
+++ b/board/pleb2/flash.c
@@ -23,12 +23,12 @@
 
 #include <common.h>
 #include <mpc8xx.h>
-/* environment.h defines the various CFG_ENV_... values in terms
+/* environment.h defines the various CONFIG_ENV_... values in terms
  * of whichever ones are given in the configuration file.
  */
 #include <environment.h>
 
-flash_info_t flash_info[CFG_MAX_FLASH_BANKS];	/* info for FLASH chips        */
+flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];	/* info for FLASH chips        */
 
 /* NOTE - CONFIG_FLASH_16BIT means the CPU interface is 16-bit, it
  *        has nothing to do with the flash chip being 8-bit or 16-bit.
@@ -59,7 +59,7 @@ static int write_word_intel (flash_info_t * info, FPWV * dest, FPW data);
 static int write_word_amd (flash_info_t * info, FPWV * dest, FPW data);
 static void flash_get_offsets (ulong base, flash_info_t * info);
 
-#ifdef CFG_FLASH_PROTECTION
+#ifdef CONFIG_SYS_FLASH_PROTECTION
 static void flash_sync_real_protect (flash_info_t * info);
 #endif
 
@@ -74,11 +74,11 @@ unsigned long flash_init (void)
 	int i;
 
 	/* Init: no FLASHes known */
-	for (i = 0; i < CFG_MAX_FLASH_BANKS; ++i) {
+	for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
 		flash_info[i].flash_id = FLASH_UNKNOWN;
 	}
 
-	size_b = flash_get_size ((FPW *) CFG_FLASH_BASE, &flash_info[0]);
+	size_b = flash_get_size ((FPW *) CONFIG_SYS_FLASH_BASE, &flash_info[0]);
 
 	flash_info[0].size = size_b;
 
@@ -90,33 +90,33 @@ unsigned long flash_init (void)
 	/* Do this again (was done already in flast_get_size), just
 	 * in case we move it when remap the FLASH.
 	 */
-	flash_get_offsets (CFG_FLASH_BASE, &flash_info[0]);
+	flash_get_offsets (CONFIG_SYS_FLASH_BASE, &flash_info[0]);
 
-#ifdef CFG_FLASH_PROTECTION
+#ifdef CONFIG_SYS_FLASH_PROTECTION
 	/* read the hardware protection status (if any) into the
 	 * protection array in flash_info.
 	 */
 	flash_sync_real_protect (&flash_info[0]);
 #endif
 
-#if CFG_MONITOR_BASE >= CFG_FLASH_BASE
+#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE
 	/* monitor protection ON by default */
 	flash_protect (FLAG_PROTECT_SET,
-		       CFG_MONITOR_BASE,
-		       CFG_MONITOR_BASE + monitor_flash_len - 1,
+		       CONFIG_SYS_MONITOR_BASE,
+		       CONFIG_SYS_MONITOR_BASE + monitor_flash_len - 1,
 		       &flash_info[0]);
 #endif
 
-#ifdef CFG_ENV_ADDR
+#ifdef CONFIG_ENV_ADDR
 	flash_protect (FLAG_PROTECT_SET,
-		       CFG_ENV_ADDR,
-		       CFG_ENV_ADDR + CFG_ENV_SIZE - 1, &flash_info[0]);
+		       CONFIG_ENV_ADDR,
+		       CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1, &flash_info[0]);
 #endif
 
-#ifdef CFG_ENV_ADDR_REDUND
+#ifdef CONFIG_ENV_ADDR_REDUND
 	flash_protect (FLAG_PROTECT_SET,
-		       CFG_ENV_ADDR_REDUND,
-		       CFG_ENV_ADDR_REDUND + CFG_ENV_SIZE_REDUND - 1,
+		       CONFIG_ENV_ADDR_REDUND,
+		       CONFIG_ENV_ADDR_REDUND + CONFIG_ENV_SIZE_REDUND - 1,
 		       &flash_info[0]);
 #endif
 
@@ -418,7 +418,7 @@ ulong flash_get_size (FPWV * addr, flash_info_t * info)
 	return (info->size);
 }
 
-#ifdef CFG_FLASH_PROTECTION
+#ifdef CONFIG_SYS_FLASH_PROTECTION
 /*-----------------------------------------------------------------------
  */
 
@@ -559,7 +559,7 @@ int flash_erase (flash_info_t * info, int s_first, int s_last)
 
 		while ((*addr & (FPW) 0x00800080) != (FPW) 0x00800080) {
 			if ((now =
-			     get_timer_masked ()) > CFG_FLASH_ERASE_TOUT) {
+			     get_timer_masked ()) > CONFIG_SYS_FLASH_ERASE_TOUT) {
 				printf ("Timeout\n");
 
 				if (intel) {
@@ -573,7 +573,7 @@ int flash_erase (flash_info_t * info, int s_first, int s_last)
 			}
 
 			/* show that we're waiting */
-			if ((now - last) > 1 * CFG_HZ) {	/* every second */
+			if ((now - last) > 1 * CONFIG_SYS_HZ) {	/* every second */
 				putc ('.');
 				last = now;
 			}
@@ -609,7 +609,7 @@ int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
 		/* combine source and destination data so can program
 		 * an entire word of 16 or 32 bits
 		 */
-#ifdef CFG_LITTLE_ENDIAN
+#ifdef CONFIG_SYS_LITTLE_ENDIAN
 		for (i = 0; i < sizeof (data); i++) {
 			data >>= 8;
 			if (i < bytes || i - bytes >= left)
@@ -688,7 +688,7 @@ static int write_word_amd (flash_info_t * info, FPWV * dest, FPW data)
 	/* data polling for D7 */
 	while (res == 0
 	       && (*dest & (FPW) 0x00800080) != (data & (FPW) 0x00800080)) {
-		if (get_timer_masked () > CFG_FLASH_WRITE_TOUT) {
+		if (get_timer_masked () > CONFIG_SYS_FLASH_WRITE_TOUT) {
 			*dest = (FPW) 0x00F000F0;	/* reset bank */
 			res = 1;
 		}
@@ -733,7 +733,7 @@ static int write_word_intel (flash_info_t * info, FPWV * dest, FPW data)
 	reset_timer_masked ();
 
 	while (res == 0 && (*dest & (FPW) 0x00800080) != (FPW) 0x00800080) {
-		if (get_timer_masked () > CFG_FLASH_WRITE_TOUT) {
+		if (get_timer_masked () > CONFIG_SYS_FLASH_WRITE_TOUT) {
 			*dest = (FPW) 0x00B000B0;	/* Suspend program      */
 			res = 1;
 		}
@@ -748,7 +748,7 @@ static int write_word_intel (flash_info_t * info, FPWV * dest, FPW data)
 	return (res);
 }
 
-#ifdef CFG_FLASH_PROTECTION
+#ifdef CONFIG_SYS_FLASH_PROTECTION
 /*-----------------------------------------------------------------------
  */
 int flash_real_protect (flash_info_t * info, long sector, int prot)
diff --git a/board/pleb2/lowlevel_init.S b/board/pleb2/lowlevel_init.S
index add2c531a..b95ff9cf2 100644
--- a/board/pleb2/lowlevel_init.S
+++ b/board/pleb2/lowlevel_init.S
@@ -24,7 +24,7 @@
 #include <version.h>
 #include <asm/arch/pxa-regs.h>
 
-DRAM_SIZE:  .long   CFG_DRAM_SIZE
+DRAM_SIZE:  .long   CONFIG_SYS_DRAM_SIZE
 
 /* wait for coprocessor write complete */
 	.macro CPWAIT reg
@@ -41,92 +41,92 @@ lowlevel_init:
 	/* Set up GPIO pins first */
 
 	ldr	r0,   =GPSR0
-	ldr	r1,   =CFG_GPSR0_VAL
+	ldr	r1,   =CONFIG_SYS_GPSR0_VAL
 	str	r1,   [r0]
 
 	ldr	r0,   =GPSR1
-	ldr	r1,   =CFG_GPSR1_VAL
+	ldr	r1,   =CONFIG_SYS_GPSR1_VAL
 	str	r1,   [r0]
 
 	ldr	r0,   =GPSR2
-	ldr	r1,   =CFG_GPSR2_VAL
+	ldr	r1,   =CONFIG_SYS_GPSR2_VAL
 	str	r1,   [r0]
 
 	ldr	r0,   =GPCR0
-	ldr	r1,   =CFG_GPCR0_VAL
+	ldr	r1,   =CONFIG_SYS_GPCR0_VAL
 	str	r1,   [r0]
 
 	ldr	r0,   =GPCR1
-	ldr	r1,   =CFG_GPCR1_VAL
+	ldr	r1,   =CONFIG_SYS_GPCR1_VAL
 	str	r1,   [r0]
 
 	ldr	r0,   =GPCR2
-	ldr	r1,   =CFG_GPCR2_VAL
+	ldr	r1,   =CONFIG_SYS_GPCR2_VAL
 	str	r1,   [r0]
 
 	ldr	r0,   =GRER0
-	ldr	r1,   =CFG_GRER0_VAL
+	ldr	r1,   =CONFIG_SYS_GRER0_VAL
 	str	r1,   [r0]
 
 	ldr	r0,   =GRER1
-	ldr	r1,   =CFG_GRER1_VAL
+	ldr	r1,   =CONFIG_SYS_GRER1_VAL
 	str	r1,   [r0]
 
 	ldr	r0,   =GRER2
-	ldr	r1,   =CFG_GRER2_VAL
+	ldr	r1,   =CONFIG_SYS_GRER2_VAL
 	str	r1,   [r0]
 
 	ldr	r0,   =GFER0
-	ldr	r1,   =CFG_GFER0_VAL
+	ldr	r1,   =CONFIG_SYS_GFER0_VAL
 	str	r1,   [r0]
 
 	ldr	r0,   =GFER1
-	ldr	r1,   =CFG_GFER1_VAL
+	ldr	r1,   =CONFIG_SYS_GFER1_VAL
 	str	r1,   [r0]
 
 	ldr	r0,   =GFER2
-	ldr	r1,   =CFG_GFER2_VAL
+	ldr	r1,   =CONFIG_SYS_GFER2_VAL
 	str	r1,   [r0]
 
 	ldr	r0,   =GPDR0
-	ldr	r1,   =CFG_GPDR0_VAL
+	ldr	r1,   =CONFIG_SYS_GPDR0_VAL
 	str	r1,   [r0]
 
 	ldr	r0,   =GPDR1
-	ldr	r1,   =CFG_GPDR1_VAL
+	ldr	r1,   =CONFIG_SYS_GPDR1_VAL
 	str	r1,   [r0]
 
 	ldr	r0,   =GPDR2
-	ldr	r1,   =CFG_GPDR2_VAL
+	ldr	r1,   =CONFIG_SYS_GPDR2_VAL
 	str	r1,   [r0]
 
 	ldr	r0,   =GAFR0_L
-	ldr	r1,   =CFG_GAFR0_L_VAL
+	ldr	r1,   =CONFIG_SYS_GAFR0_L_VAL
 	str	r1,   [r0]
 
 	ldr	r0,   =GAFR0_U
-	ldr	r1,   =CFG_GAFR0_U_VAL
+	ldr	r1,   =CONFIG_SYS_GAFR0_U_VAL
 	str	r1,   [r0]
 
 	ldr	r0,   =GAFR1_L
-	ldr	r1,   =CFG_GAFR1_L_VAL
+	ldr	r1,   =CONFIG_SYS_GAFR1_L_VAL
 	str	r1,   [r0]
 
 	ldr	r0,   =GAFR1_U
-	ldr	r1,   =CFG_GAFR1_U_VAL
+	ldr	r1,   =CONFIG_SYS_GAFR1_U_VAL
 	str	r1,   [r0]
 
 	ldr	r0,   =GAFR2_L
-	ldr	r1,   =CFG_GAFR2_L_VAL
+	ldr	r1,   =CONFIG_SYS_GAFR2_L_VAL
 	str	r1,   [r0]
 
 	ldr	r0,   =GAFR2_U
-	ldr	r1,   =CFG_GAFR2_U_VAL
+	ldr	r1,   =CONFIG_SYS_GAFR2_U_VAL
 	str	r1,   [r0]
 
 	/* enable GPIO pins */
 	ldr	r0,   =PSSR
-	ldr	r1,   =CFG_PSSR_VAL
+	ldr	r1,   =CONFIG_SYS_PSSR_VAL
 	str	r1,   [r0]
 
 
@@ -161,61 +161,61 @@ mem_init:
 	@ Step 2a
 	@ write msc0, read back to ensure data latches
 	@
-	ldr	r2,   =CFG_MSC0_VAL
+	ldr	r2,   =CONFIG_SYS_MSC0_VAL
 	str	r2,   [r1, #MSC0_OFFSET]
 	ldr	r2,   [r1, #MSC0_OFFSET]
 
 	@ write msc1
-	ldr	r2,  =CFG_MSC1_VAL
+	ldr	r2,  =CONFIG_SYS_MSC1_VAL
 	str	r2,  [r1, #MSC1_OFFSET]
 	ldr	r2,  [r1, #MSC1_OFFSET]
 
 	@ write msc2
-	ldr	r2,  =CFG_MSC2_VAL
+	ldr	r2,  =CONFIG_SYS_MSC2_VAL
 	str	r2,  [r1, #MSC2_OFFSET]
 	ldr	r2,  [r1, #MSC2_OFFSET]
 
 
 @ Step 2b
 	@ write mecr
-	ldr	r2,  =CFG_MECR_VAL
+	ldr	r2,  =CONFIG_SYS_MECR_VAL
 	str	r2,  [r1, #MECR_OFFSET]
 
 	@ write mcmem0
-	ldr	r2,  =CFG_MCMEM0_VAL
+	ldr	r2,  =CONFIG_SYS_MCMEM0_VAL
 	str	r2,  [r1, #MCMEM0_OFFSET]
 
 	@ write mcmem1
-	ldr	r2,  =CFG_MCMEM1_VAL
+	ldr	r2,  =CONFIG_SYS_MCMEM1_VAL
 	str	r2,  [r1, #MCMEM1_OFFSET]
 
 	@ write mcatt0
-	ldr	r2,  =CFG_MCATT0_VAL
+	ldr	r2,  =CONFIG_SYS_MCATT0_VAL
 	str	r2,  [r1, #MCATT0_OFFSET]
 
 	@ write mcatt1
-	ldr	r2,  =CFG_MCATT1_VAL
+	ldr	r2,  =CONFIG_SYS_MCATT1_VAL
 	str	r2,  [r1, #MCATT1_OFFSET]
 
 	@ write mcio0
-	ldr	r2,  =CFG_MCIO0_VAL
+	ldr	r2,  =CONFIG_SYS_MCIO0_VAL
 	str	r2,  [r1, #MCIO0_OFFSET]
 
 	@ write mcio1
-	ldr	r2,  =CFG_MCIO1_VAL
+	ldr	r2,  =CONFIG_SYS_MCIO1_VAL
 	str	r2,  [r1, #MCIO1_OFFSET]
 
 @ Step 2c
 	@ fly-by-dma is defeatured on this part
 	@ write flycnfg
-	@ldr	r2,  =CFG_FLYCNFG_VAL
+	@ldr	r2,  =CONFIG_SYS_FLYCNFG_VAL
 	@str	r2,  [r1, #FLYCNFG_OFFSET]
 
 /* FIXME Does this sequence really make sense */
 #ifdef REDBOOT_WAY
 	@ Step 2d
 	@ get the mdrefr settings
-	ldr	r3,  =CFG_MDREFR_VAL
+	ldr	r3,  =CONFIG_SYS_MDREFR_VAL
 
 	@ extract DRI field (we need a valid DRI field)
 	@
@@ -296,7 +296,7 @@ mem_init:
 #else
 	@ Step 2d
 	@ get the mdrefr settings
-	ldr	r3,  =CFG_MDREFR_VAL
+	ldr	r3,  =CONFIG_SYS_MDREFR_VAL
 
 	@ write back mdrefr
 	@
@@ -340,7 +340,7 @@ mem_init:
 	@ Step 4d
 	@ fetch platform value of mdcnfg
 	@
-	ldr	r2,  =CFG_MDCNFG_VAL
+	ldr	r2,  =CONFIG_SYS_MDCNFG_VAL
 
 	@ disable all sdram banks
 	@
@@ -375,7 +375,7 @@ mem_init:
 	@ Access memory *not yet enabled* for CBR refresh cycles (8)
 	@ - CBR is generated for all banks
 
-	ldr	r2, =CFG_DRAM_BASE
+	ldr	r2, =CONFIG_SYS_DRAM_BASE
 	str	r2, [r2]
 	str	r2, [r2]
 	str	r2, [r2]
@@ -405,7 +405,7 @@ mem_init:
 	@ Step 4h
 	@ write mdmrs
 	@
-	ldr	r2,  =CFG_MDMRS_VAL
+	ldr	r2,  =CONFIG_SYS_MDMRS_VAL
 	str	r2,  [r1, #MDMRS_OFFSET]
 
 	@ Done Memory Init
@@ -424,7 +424,7 @@ mem_init:
 
 	@ Set interrupt mask register
 	@
-	ldr	r1,  =CFG_ICMR_VAL
+	ldr	r1,  =CONFIG_SYS_ICMR_VAL
 	ldr	r2,  =ICMR
 	str	r1,  [r2]
 
@@ -440,7 +440,7 @@ mem_init:
 
 	@ set core clocks
 	@
-	ldr	r2,  =CFG_CCCR_VAL
+	ldr	r2,  =CONFIG_SYS_CCCR_VAL
 	ldr	r1,  =CCCR
 	str	r2,  [r1]
 
@@ -463,7 +463,7 @@ mem_init:
 	@ Turn on needed clocks
 	@
 	ldr	r1,  =CKEN
-	ldr	r2,  =CFG_CKEN_VAL
+	ldr	r2,  =CONFIG_SYS_CKEN_VAL
 	str	r2,  [r1]
 
 	/*SET_LED 7 */
diff --git a/board/pleb2/u-boot.lds b/board/pleb2/u-boot.lds
index 14d264a68..7cf9fdf63 100644
--- a/board/pleb2/u-boot.lds
+++ b/board/pleb2/u-boot.lds
@@ -51,6 +51,6 @@ SECTIONS
 
 	. = ALIGN(4);
 	__bss_start = .;
-	.bss (NOLOAD) : { *(.bss) }
+	.bss (NOLOAD) : { *(.bss) . = ALIGN(4); }
 	_end = .;
 }
diff --git a/board/pm520/flash.c b/board/pm520/flash.c
index 4301b8c23..64c862415 100644
--- a/board/pm520/flash.c
+++ b/board/pm520/flash.c
@@ -28,7 +28,7 @@
 #include <linux/byteorder/swab.h>
 
 
-flash_info_t flash_info[CFG_MAX_FLASH_BANKS];	/* info for FLASH chips    */
+flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];	/* info for FLASH chips    */
 
 /* Board support for 1 or 2 flash devices */
 #define FLASH_PORT_WIDTH32
@@ -87,11 +87,11 @@ unsigned long flash_init (void)
 	ulong size = 0;
 	extern void flash_preinit(void);
 	extern void flash_afterinit(ulong, ulong);
-	ulong flashbase = CFG_FLASH_BASE;
+	ulong flashbase = CONFIG_SYS_FLASH_BASE;
 
 	flash_preinit();
 
-	for (i = 0; i < CFG_MAX_FLASH_BANKS; i++) {
+	for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) {
 		switch (i) {
 		case 0:
 			memset(&flash_info[i], 0, sizeof(flash_info_t));
@@ -110,19 +110,19 @@ unsigned long flash_init (void)
 
 	/* Protect monitor and environment sectors
 	 */
-#if CFG_MONITOR_BASE >= CFG_FLASH_BASE
+#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE
 #ifndef CONFIG_BOOT_ROM
 	flash_protect ( FLAG_PROTECT_SET,
-			CFG_MONITOR_BASE,
-			CFG_MONITOR_BASE + monitor_flash_len - 1,
+			CONFIG_SYS_MONITOR_BASE,
+			CONFIG_SYS_MONITOR_BASE + monitor_flash_len - 1,
 			&flash_info[0] );
 #endif
 #endif
 
-#ifdef	CFG_ENV_IS_IN_FLASH
+#ifdef	CONFIG_ENV_IS_IN_FLASH
 	flash_protect ( FLAG_PROTECT_SET,
-			CFG_ENV_ADDR,
-			CFG_ENV_ADDR + CFG_ENV_SIZE - 1, &flash_info[0] );
+			CONFIG_ENV_ADDR,
+			CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1, &flash_info[0] );
 #endif
 
 	flash_afterinit(flash_info[0].start[0], flash_info[0].size);
@@ -245,28 +245,28 @@ static ulong flash_get_size (FPW *addr, flash_info_t *info)
 		/* In U-Boot we support only 32 MB (no bank-switching) */
 		info->sector_count = 256 / 2;
 		info->size =  0x04000000 / 2;
-		info->start[0] = CFG_FLASH_BASE + 0x02000000;
+		info->start[0] = CONFIG_SYS_FLASH_BASE + 0x02000000;
 		break;				/* => 32 MB     */
 
 	case (FPW) INTEL_ID_28F128J3A:
 		info->flash_id += FLASH_28F128J3A;
 		info->sector_count = 128;
 		info->size = 0x02000000;
-		info->start[0] = CFG_FLASH_BASE + 0x02000000;
+		info->start[0] = CONFIG_SYS_FLASH_BASE + 0x02000000;
 		break;				/* => 32 MB     */
 
 	case (FPW) INTEL_ID_28F640J3A:
 		info->flash_id += FLASH_28F640J3A;
 		info->sector_count = 64;
 		info->size = 0x01000000;
-		info->start[0] = CFG_FLASH_BASE + 0x03000000;
+		info->start[0] = CONFIG_SYS_FLASH_BASE + 0x03000000;
 		break;				/* => 16 MB     */
 
 	case (FPW) INTEL_ID_28F320J3A:
 		info->flash_id += FLASH_28F320J3A;
 		info->sector_count = 32;
 		info->size = 0x800000;
-		info->start[0] = CFG_FLASH_BASE + 0x03800000;
+		info->start[0] = CONFIG_SYS_FLASH_BASE + 0x03800000;
 		break;				/* => 8 MB     */
 
 	default:
@@ -274,10 +274,10 @@ static ulong flash_get_size (FPW *addr, flash_info_t *info)
 		break;
 	}
 
-	if (info->sector_count > CFG_MAX_FLASH_SECT) {
+	if (info->sector_count > CONFIG_SYS_MAX_FLASH_SECT) {
 		printf ("** ERROR: sector count %d > max (%d) **\n",
-			info->sector_count, CFG_MAX_FLASH_SECT);
-		info->sector_count = CFG_MAX_FLASH_SECT;
+			info->sector_count, CONFIG_SYS_MAX_FLASH_SECT);
+		info->sector_count = CONFIG_SYS_MAX_FLASH_SECT;
 	}
 
 	addr[0] = (FPW) 0x00FF00FF;		/* restore read mode */
@@ -328,7 +328,7 @@ static unsigned char intel_sector_protected (flash_info_t *info, ushort sector)
 	/*
 	 * first, wait for the WSM to be finished. The rationale for
 	 * waiting for the WSM to become idle for at most
-	 * CFG_FLASH_ERASE_TOUT is as follows. The WSM can be busy
+	 * CONFIG_SYS_FLASH_ERASE_TOUT is as follows. The WSM can be busy
 	 * because of: (1) erase, (2) program or (3) lock bit
 	 * configuration. So we just wait for the longest timeout of
 	 * the (1)-(3), i.e. the erase timeout.
@@ -341,7 +341,7 @@ static unsigned char intel_sector_protected (flash_info_t *info, ushort sector)
 
 	start = get_timer (0);
 	while ((*addr & (FPW) INTEL_FINISHED) != (FPW) INTEL_FINISHED) {
-		if (get_timer (start) > CFG_FLASH_ERASE_TOUT) {
+		if (get_timer (start) > CONFIG_SYS_FLASH_ERASE_TOUT) {
 			*addr = (FPW) INTEL_RESET; /* restore read mode */
 			printf("WSM busy too long, can't get prot status\n");
 			return 1;
@@ -425,7 +425,7 @@ int flash_erase (flash_info_t *info, int s_first, int s_last)
 			*addr = (FPW) 0x00D000D0;	/* erase confirm */
 
 			while (((status = *addr) & (FPW) 0x00800080) != (FPW) 0x00800080) {
-				if (get_timer(start) > CFG_FLASH_ERASE_TOUT) {
+				if (get_timer(start) > CONFIG_SYS_FLASH_ERASE_TOUT) {
 					printf ("Timeout\n");
 					*addr = (FPW) 0x00B000B0;	/* suspend erase     */
 					*addr = (FPW) 0x00FF00FF;	/* reset to read mode */
@@ -560,7 +560,7 @@ static int write_data (flash_info_t *info, ulong dest, FPW data)
 
 	/* wait while polling the status register */
 	while (((status = *addr) & (FPW) 0x00800080) != (FPW) 0x00800080) {
-		if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+		if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
 			*addr = (FPW) 0x00FF00FF;	/* restore read mode */
 			return (1);
 		}
@@ -606,7 +606,7 @@ int flash_real_protect (flash_info_t *info, long sector, int prot)
 	start = get_timer(0);
 
 	while ((*addr & INTEL_FINISHED) != INTEL_FINISHED) {
-		if (get_timer(start) > CFG_FLASH_UNLOCK_TOUT) {
+		if (get_timer(start) > CONFIG_SYS_FLASH_UNLOCK_TOUT) {
 			printf("Flash lock bit operation timed out\n");
 			rc = 1;
 			break;
@@ -643,7 +643,7 @@ int flash_real_protect (flash_info_t *info, long sector, int prot)
 				*addr = INTEL_PROTECT;	/* set */
 				while ((*addr & INTEL_FINISHED) != INTEL_FINISHED)
 				{
-					if (get_timer(start) > CFG_FLASH_UNLOCK_TOUT)
+					if (get_timer(start) > CONFIG_SYS_FLASH_UNLOCK_TOUT)
 					{
 						printf("Flash lock bit operation timed out\n");
 						rc = 1;
diff --git a/board/pm520/pm520.c b/board/pm520/pm520.c
index 83d9bcd02..9da104173 100644
--- a/board/pm520/pm520.c
+++ b/board/pm520/pm520.c
@@ -27,6 +27,7 @@
 #include <common.h>
 #include <mpc5xxx.h>
 #include <pci.h>
+#include <netdev.h>
 
 #if defined(CONFIG_MPC5200_DDR)
 #include "mt46v16m16-75.h"
@@ -36,7 +37,7 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
-#ifndef CFG_RAMBOOT
+#ifndef CONFIG_SYS_RAMBOOT
 static void sdram_start (int hi_addr)
 {
 	long hi_addr_bit = hi_addr ? 0x01000000 : 0;
@@ -79,7 +80,7 @@ static void sdram_start (int hi_addr)
 
 /*
  * ATTENTION: Although partially referenced initdram does NOT make real use
- *            use of CFG_SDRAM_BASE. The code does not work if CFG_SDRAM_BASE
+ *            use of CONFIG_SYS_SDRAM_BASE. The code does not work if CONFIG_SYS_SDRAM_BASE
  *            is something else than 0x00000000.
  */
 
@@ -88,7 +89,7 @@ phys_size_t initdram (int board_type)
 {
 	ulong dramsize = 0;
 	ulong dramsize2 = 0;
-#ifndef CFG_RAMBOOT
+#ifndef CONFIG_SYS_RAMBOOT
 	ulong test1, test2;
 
 	/* setup SDRAM chip selects */
@@ -109,9 +110,9 @@ phys_size_t initdram (int board_type)
 
 	/* find RAM size using SDRAM CS0 only */
 	sdram_start(0);
-	test1 = get_ram_size((long *)CFG_SDRAM_BASE, 0x80000000);
+	test1 = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE, 0x80000000);
 	sdram_start(1);
-	test2 = get_ram_size((long *)CFG_SDRAM_BASE, 0x80000000);
+	test2 = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE, 0x80000000);
 	if (test1 > test2) {
 		sdram_start(0);
 		dramsize = test1;
@@ -137,10 +138,10 @@ phys_size_t initdram (int board_type)
 	/* find RAM size using SDRAM CS1 only */
 	if (!dramsize)
 		sdram_start(0);
-	test2 = test1 = get_ram_size((long *)(CFG_SDRAM_BASE + dramsize), 0x80000000);
+	test2 = test1 = get_ram_size((long *)(CONFIG_SYS_SDRAM_BASE + dramsize), 0x80000000);
 	if (!dramsize) {
 		sdram_start(1);
-		test2 = get_ram_size((long *)(CFG_SDRAM_BASE + dramsize), 0x80000000);
+		test2 = get_ram_size((long *)(CONFIG_SYS_SDRAM_BASE + dramsize), 0x80000000);
 	}
 	if (test1 > test2) {
 		sdram_start(0);
@@ -162,7 +163,7 @@ phys_size_t initdram (int board_type)
 		*(vu_long *)MPC5XXX_SDRAM_CS1CFG = dramsize; /* disabled */
 	}
 
-#else /* CFG_RAMBOOT */
+#else /* CONFIG_SYS_RAMBOOT */
 
 	/* retrieve size of memory connected to SDRAM CS0 */
 	dramsize = *(vu_long *)MPC5XXX_SDRAM_CS0CFG & 0xFF;
@@ -180,7 +181,7 @@ phys_size_t initdram (int board_type)
 		dramsize2 = 0;
 	}
 
-#endif /* CFG_RAMBOOT */
+#endif /* CONFIG_SYS_RAMBOOT */
 
 	return dramsize + dramsize2;
 }
@@ -190,7 +191,7 @@ phys_size_t initdram (int board_type)
 phys_size_t initdram (int board_type)
 {
 	ulong dramsize = 0;
-#ifndef CFG_RAMBOOT
+#ifndef CONFIG_SYS_RAMBOOT
 	ulong test1, test2;
 
 	/* setup and enable SDRAM chip selects */
@@ -209,9 +210,9 @@ phys_size_t initdram (int board_type)
 
 	/* find RAM size */
 	sdram_start(0);
-	test1 = get_ram_size((ulong *)CFG_SDRAM_BASE, 0x80000000);
+	test1 = get_ram_size((ulong *)CONFIG_SYS_SDRAM_BASE, 0x80000000);
 	sdram_start(1);
-	test2 = get_ram_size((ulong *)CFG_SDRAM_BASE, 0x80000000);
+	test2 = get_ram_size((ulong *)CONFIG_SYS_SDRAM_BASE, 0x80000000);
 	if (test1 > test2) {
 		sdram_start(0);
 		dramsize = test1;
@@ -222,12 +223,12 @@ phys_size_t initdram (int board_type)
 	/* set SDRAM end address according to size */
 	*(vu_long *)MPC5XXX_SDRAM_STOP = ((dramsize - 1) >> 15);
 
-#else /* CFG_RAMBOOT */
+#else /* CONFIG_SYS_RAMBOOT */
 
 	/* Retrieve amount of SDRAM available */
 	dramsize = ((*(vu_long *)MPC5XXX_SDRAM_STOP + 1) << 15);
 
-#endif /* CFG_RAMBOOT */
+#endif /* CONFIG_SYS_RAMBOOT */
 
 	return dramsize;
 }
@@ -315,9 +316,14 @@ void ide_set_reset (int idereset)
 #endif
 
 #if defined(CONFIG_CMD_DOC)
-extern void doc_probe (ulong physadr);
 void doc_init (void)
 {
-	doc_probe (CFG_DOC_BASE);
+	doc_probe (CONFIG_SYS_DOC_BASE);
 }
 #endif
+
+int board_eth_init(bd_t *bis)
+{
+	cpu_eth_init(bis); /* Built in FEC comes first */
+	return pci_eth_init(bis);
+}
diff --git a/board/pm826/flash.c b/board/pm826/flash.c
index fee07cf35..010f59a6b 100644
--- a/board/pm826/flash.c
+++ b/board/pm826/flash.c
@@ -28,7 +28,7 @@
 #include <mpc8xx.h>
 
 
-flash_info_t flash_info[CFG_MAX_FLASH_BANKS];
+flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];
 
 /*-----------------------------------------------------------------------
  */
@@ -116,13 +116,13 @@ unsigned long flash_init (void)
 
 	/* Init: no FLASHes known
 	 */
-	for (i = 0; i < CFG_MAX_FLASH_BANKS; ++i) {
+	for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
 		flash_info[i].flash_id = FLASH_UNKNOWN;
 	}
 
 	/* Static FLASH Bank configuration here (only one bank) */
 
-	size_b0 = flash_get_size ((ulong *) CFG_FLASH0_BASE, &flash_info[0]);
+	size_b0 = flash_get_size ((ulong *) CONFIG_SYS_FLASH0_BASE, &flash_info[0]);
 	if (flash_info[0].flash_id == FLASH_UNKNOWN || size_b0 == 0) {
 		printf ("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n",
 				size_b0, size_b0 >> 20);
@@ -132,25 +132,25 @@ unsigned long flash_init (void)
 	 */
 
 #ifndef CONFIG_BOOT_ROM
-	/* If U-Boot is  booted from ROM the CFG_MONITOR_BASE > CFG_FLASH0_BASE
+	/* If U-Boot is  booted from ROM the CONFIG_SYS_MONITOR_BASE > CONFIG_SYS_FLASH0_BASE
 	 * but we shouldn't protect it.
 	 */
 
-# if CFG_MONITOR_BASE >= CFG_FLASH0_BASE
+# if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH0_BASE
 	flash_protect (FLAG_PROTECT_SET,
-		       CFG_MONITOR_BASE,
-		       CFG_MONITOR_BASE + monitor_flash_len - 1, &flash_info[0]
+		       CONFIG_SYS_MONITOR_BASE,
+		       CONFIG_SYS_MONITOR_BASE + monitor_flash_len - 1, &flash_info[0]
 	);
 # endif
 #endif	/* CONFIG_BOOT_ROM */
 
-#if (CFG_ENV_IS_IN_FLASH == 1) && defined(CFG_ENV_ADDR)
-# ifndef  CFG_ENV_SIZE
-#  define CFG_ENV_SIZE	CFG_ENV_SECT_SIZE
+#if defined(CONFIG_ENV_IS_IN_FLASH) && defined(CONFIG_ENV_ADDR)
+# ifndef  CONFIG_ENV_SIZE
+#  define CONFIG_ENV_SIZE	CONFIG_ENV_SECT_SIZE
 # endif
 	flash_protect (FLAG_PROTECT_SET,
-		       CFG_ENV_ADDR,
-		       CFG_ENV_ADDR + CFG_ENV_SIZE - 1, &flash_info[0]);
+		       CONFIG_ENV_ADDR,
+		       CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1, &flash_info[0]);
 #endif
 
 	return (size_b0);
@@ -267,7 +267,7 @@ int flash_erase (flash_info_t * info, int s_first, int s_last)
 			last = start;
 			while ((addr[0] & 0x00800080) != 0x00800080 ||
 				   (addr[1] & 0x00800080) != 0x00800080) {
-				if ((now = get_timer (start)) > CFG_FLASH_ERASE_TOUT) {
+				if ((now = get_timer (start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
 					printf ("Timeout (erase suspended!)\n");
 					/* Suspend erase
 					 */
@@ -362,7 +362,7 @@ static int write_word (flash_info_t * info, volatile unsigned long *addr,
 
 	start = get_timer (0);
 	while ((*addr & 0x00800080) != 0x00800080) {
-		if (get_timer (start) > CFG_FLASH_WRITE_TOUT) {
+		if (get_timer (start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
 			/* Suspend program
 			 */
 			*addr = 0x00B000B0;
diff --git a/board/pm826/pm826.c b/board/pm826/pm826.c
index 7ee3ab65c..19e7a0002 100644
--- a/board/pm826/pm826.c
+++ b/board/pm826/pm826.c
@@ -25,6 +25,7 @@
 #include <ioports.h>
 #include <mpc8260.h>
 #include <pci.h>
+#include <netdev.h>
 
 /*
  * I/O Port configuration table
@@ -255,7 +256,7 @@ static long int try_init (volatile memctl8260_t * memctl, ulong sdmr,
 	 *  accessing the SDRAM with a single-byte transaction."
 	 *
 	 * The appropriate BRx/ORx registers have already been set when we
-	 * get here. The SDRAM can be accessed at the address CFG_SDRAM_BASE.
+	 * get here. The SDRAM can be accessed at the address CONFIG_SYS_SDRAM_BASE.
 	 */
 
 	*sdmr_ptr = sdmr | PSDMR_OP_PREA;
@@ -266,7 +267,7 @@ static long int try_init (volatile memctl8260_t * memctl, ulong sdmr,
 		*base = c;
 
 	*sdmr_ptr = sdmr | PSDMR_OP_MRW;
-	*(base + CFG_MRS_OFFS) = c;	/* setting MR on address lines */
+	*(base + CONFIG_SYS_MRS_OFFS) = c;	/* setting MR on address lines */
 
 	*sdmr_ptr = sdmr | PSDMR_OP_NORM | PSDMR_RFEN;
 	*base = c;
@@ -281,29 +282,29 @@ static long int try_init (volatile memctl8260_t * memctl, ulong sdmr,
 
 phys_size_t initdram (int board_type)
 {
-	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
 	volatile memctl8260_t *memctl = &immap->im_memctl;
 
-#ifndef CFG_RAMBOOT
+#ifndef CONFIG_SYS_RAMBOOT
 	ulong size8, size9;
 #endif
 	ulong psize = 32 * 1024 * 1024;
 
-	memctl->memc_psrt = CFG_PSRT;
-	memctl->memc_mptpr = CFG_MPTPR;
+	memctl->memc_psrt = CONFIG_SYS_PSRT;
+	memctl->memc_mptpr = CONFIG_SYS_MPTPR;
 
-#ifndef CFG_RAMBOOT
-	size8 = try_init (memctl, CFG_PSDMR_8COL, CFG_OR2_8COL,
-					  (uchar *) CFG_SDRAM_BASE);
-	size9 = try_init (memctl, CFG_PSDMR_9COL, CFG_OR2_9COL,
-					  (uchar *) CFG_SDRAM_BASE);
+#ifndef CONFIG_SYS_RAMBOOT
+	size8 = try_init (memctl, CONFIG_SYS_PSDMR_8COL, CONFIG_SYS_OR2_8COL,
+					  (uchar *) CONFIG_SYS_SDRAM_BASE);
+	size9 = try_init (memctl, CONFIG_SYS_PSDMR_9COL, CONFIG_SYS_OR2_9COL,
+					  (uchar *) CONFIG_SYS_SDRAM_BASE);
 
 	if (size8 < size9) {
 		psize = size9;
 		printf ("(60x:9COL) ");
 	} else {
-		psize = try_init (memctl, CFG_PSDMR_8COL, CFG_OR2_8COL,
-						  (uchar *) CFG_SDRAM_BASE);
+		psize = try_init (memctl, CONFIG_SYS_PSDMR_8COL, CONFIG_SYS_OR2_8COL,
+						  (uchar *) CONFIG_SYS_SDRAM_BASE);
 		printf ("(60x:8COL) ");
 	}
 #endif
@@ -311,10 +312,9 @@ phys_size_t initdram (int board_type)
 }
 
 #if defined(CONFIG_CMD_DOC)
-extern void doc_probe (ulong physadr);
 void doc_init (void)
 {
-	doc_probe (CFG_DOC_BASE);
+	doc_probe (CONFIG_SYS_DOC_BASE);
 }
 #endif
 
@@ -328,3 +328,8 @@ void pci_init_board(void)
 	pci_mpc8250_init(&hose);
 }
 #endif
+
+int board_eth_init(bd_t *bis)
+{
+	return pci_eth_init(bis);
+}
diff --git a/board/pm828/flash.c b/board/pm828/flash.c
index 1f21b3e9c..4958a95ff 100644
--- a/board/pm828/flash.c
+++ b/board/pm828/flash.c
@@ -28,7 +28,7 @@
 #include <mpc8xx.h>
 
 
-flash_info_t flash_info[CFG_MAX_FLASH_BANKS];
+flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];
 
 /*-----------------------------------------------------------------------
  */
@@ -116,13 +116,13 @@ unsigned long flash_init (void)
 
 	/* Init: no FLASHes known
 	 */
-	for (i = 0; i < CFG_MAX_FLASH_BANKS; ++i) {
+	for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
 		flash_info[i].flash_id = FLASH_UNKNOWN;
 	}
 
 	/* Static FLASH Bank configuration here (only one bank) */
 
-	size_b0 = flash_get_size ((ulong *) CFG_FLASH0_BASE, &flash_info[0]);
+	size_b0 = flash_get_size ((ulong *) CONFIG_SYS_FLASH0_BASE, &flash_info[0]);
 	if (flash_info[0].flash_id == FLASH_UNKNOWN || size_b0 == 0) {
 		printf ("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n",
 				size_b0, size_b0 >> 20);
@@ -132,25 +132,25 @@ unsigned long flash_init (void)
 	 */
 
 #ifndef CONFIG_BOOT_ROM
-	/* If U-Boot is  booted from ROM the CFG_MONITOR_BASE > CFG_FLASH0_BASE
+	/* If U-Boot is  booted from ROM the CONFIG_SYS_MONITOR_BASE > CONFIG_SYS_FLASH0_BASE
 	 * but we shouldn't protect it.
 	 */
 
-# if CFG_MONITOR_BASE >= CFG_FLASH0_BASE
+# if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH0_BASE
 	flash_protect (FLAG_PROTECT_SET,
-		       CFG_MONITOR_BASE,
-		       CFG_MONITOR_BASE + monitor_flash_len - 1, &flash_info[0]
+		       CONFIG_SYS_MONITOR_BASE,
+		       CONFIG_SYS_MONITOR_BASE + monitor_flash_len - 1, &flash_info[0]
 	);
 # endif
 #endif	/* CONFIG_BOOT_ROM */
 
-#if (CFG_ENV_IS_IN_FLASH == 1) && defined(CFG_ENV_ADDR)
-# ifndef  CFG_ENV_SIZE
-#  define CFG_ENV_SIZE	CFG_ENV_SECT_SIZE
+#if defined(CONFIG_ENV_IS_IN_FLASH) && defined(CONFIG_ENV_ADDR)
+# ifndef  CONFIG_ENV_SIZE
+#  define CONFIG_ENV_SIZE	CONFIG_ENV_SECT_SIZE
 # endif
 	flash_protect (FLAG_PROTECT_SET,
-		       CFG_ENV_ADDR,
-		       CFG_ENV_ADDR + CFG_ENV_SIZE - 1, &flash_info[0]);
+		       CONFIG_ENV_ADDR,
+		       CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1, &flash_info[0]);
 #endif
 
 	return (size_b0);
@@ -267,7 +267,7 @@ int flash_erase (flash_info_t * info, int s_first, int s_last)
 			last = start;
 			while ((addr[0] & 0x00800080) != 0x00800080 ||
 				   (addr[1] & 0x00800080) != 0x00800080) {
-				if ((now = get_timer (start)) > CFG_FLASH_ERASE_TOUT) {
+				if ((now = get_timer (start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
 					printf ("Timeout (erase suspended!)\n");
 					/* Suspend erase
 					 */
@@ -362,7 +362,7 @@ static int write_word (flash_info_t * info, volatile unsigned long *addr,
 
 	start = get_timer (0);
 	while ((*addr & 0x00800080) != 0x00800080) {
-		if (get_timer (start) > CFG_FLASH_WRITE_TOUT) {
+		if (get_timer (start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
 			/* Suspend program
 			 */
 			*addr = 0x00B000B0;
diff --git a/board/pm828/pm828.c b/board/pm828/pm828.c
index 6038e9758..4a3b2fd89 100644
--- a/board/pm828/pm828.c
+++ b/board/pm828/pm828.c
@@ -25,6 +25,7 @@
 #include <ioports.h>
 #include <mpc8260.h>
 #include <pci.h>
+#include <netdev.h>
 
 /*
  * I/O Port configuration table
@@ -258,7 +259,7 @@ static long int try_init (volatile memctl8260_t * memctl, ulong sdmr,
 	 *  accessing the SDRAM with a single-byte transaction."
 	 *
 	 * The appropriate BRx/ORx registers have already been set when we
-	 * get here. The SDRAM can be accessed at the address CFG_SDRAM_BASE.
+	 * get here. The SDRAM can be accessed at the address CONFIG_SYS_SDRAM_BASE.
 	 */
 
 	*sdmr_ptr = sdmr | PSDMR_OP_PREA;
@@ -269,7 +270,7 @@ static long int try_init (volatile memctl8260_t * memctl, ulong sdmr,
 		*base = c;
 
 	*sdmr_ptr = sdmr | PSDMR_OP_MRW;
-	*(base + CFG_MRS_OFFS) = c;	/* setting MR on address lines */
+	*(base + CONFIG_SYS_MRS_OFFS) = c;	/* setting MR on address lines */
 
 	*sdmr_ptr = sdmr | PSDMR_OP_NORM | PSDMR_RFEN;
 	*base = c;
@@ -314,29 +315,29 @@ static long int try_init (volatile memctl8260_t * memctl, ulong sdmr,
 
 phys_size_t initdram (int board_type)
 {
-	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
 	volatile memctl8260_t *memctl = &immap->im_memctl;
 
-#ifndef CFG_RAMBOOT
+#ifndef CONFIG_SYS_RAMBOOT
 	ulong size8, size9;
 #endif
 	ulong psize = 32 * 1024 * 1024;
 
-	memctl->memc_psrt = CFG_PSRT;
-	memctl->memc_mptpr = CFG_MPTPR;
+	memctl->memc_psrt = CONFIG_SYS_PSRT;
+	memctl->memc_mptpr = CONFIG_SYS_MPTPR;
 
-#ifndef CFG_RAMBOOT
-	size8 = try_init (memctl, CFG_PSDMR_8COL, CFG_OR2_8COL,
-					  (uchar *) CFG_SDRAM_BASE);
-	size9 = try_init (memctl, CFG_PSDMR_9COL, CFG_OR2_9COL,
-					  (uchar *) CFG_SDRAM_BASE);
+#ifndef CONFIG_SYS_RAMBOOT
+	size8 = try_init (memctl, CONFIG_SYS_PSDMR_8COL, CONFIG_SYS_OR2_8COL,
+					  (uchar *) CONFIG_SYS_SDRAM_BASE);
+	size9 = try_init (memctl, CONFIG_SYS_PSDMR_9COL, CONFIG_SYS_OR2_9COL,
+					  (uchar *) CONFIG_SYS_SDRAM_BASE);
 
 	if (size8 < size9) {
 		psize = size9;
 		printf ("(60x:9COL) ");
 	} else {
-		psize = try_init (memctl, CFG_PSDMR_8COL, CFG_OR2_8COL,
-						  (uchar *) CFG_SDRAM_BASE);
+		psize = try_init (memctl, CONFIG_SYS_PSDMR_8COL, CONFIG_SYS_OR2_8COL,
+						  (uchar *) CONFIG_SYS_SDRAM_BASE);
 		printf ("(60x:8COL) ");
 	}
 #endif
@@ -344,10 +345,9 @@ phys_size_t initdram (int board_type)
 }
 
 #if defined(CONFIG_CMD_DOC)
-extern void doc_probe (ulong physadr);
 void doc_init (void)
 {
-	doc_probe (CFG_DOC_BASE);
+	doc_probe (CONFIG_SYS_DOC_BASE);
 }
 #endif
 
@@ -361,3 +361,8 @@ void pci_init_board(void)
 	pci_mpc8250_init(&hose);
 }
 #endif
+
+int board_eth_init(bd_t *bis)
+{
+	return pci_eth_init(bis);
+}
diff --git a/board/pm854/ddr.c b/board/pm854/ddr.c
index 45372f427..7850794d6 100644
--- a/board/pm854/ddr.c
+++ b/board/pm854/ddr.c
@@ -10,6 +10,7 @@
 #include <i2c.h>
 
 #include <asm/fsl_ddr_sdram.h>
+#include <asm/fsl_ddr_dimm_params.h>
 
 static void
 get_spd(ddr1_spd_eeprom_t *spd, unsigned char i2c_address)
@@ -40,7 +41,9 @@ fsl_ddr_get_spd(ddr1_spd_eeprom_t *ctrl_dimms_spd,
 	}
 }
 
-void fsl_ddr_board_options(memctl_options_t *popts, unsigned int ctrl_num)
+void fsl_ddr_board_options(memctl_options_t *popts,
+				dimm_params_t *pdimm,
+				unsigned int ctrl_num)
 {
 	/*
 	 * Factors to consider for CPO:
diff --git a/board/pm854/law.c b/board/pm854/law.c
index d74d17abd..39e8dbbd5 100644
--- a/board/pm854/law.c
+++ b/board/pm854/law.c
@@ -46,13 +46,13 @@
 
 struct law_entry law_table[] = {
 #ifndef CONFIG_SPD_EEPROM
-	SET_LAW(CFG_DDR_SDRAM_BASE, LAW_SIZE_256M, LAW_TRGT_IF_DDR),
+	SET_LAW(CONFIG_SYS_DDR_SDRAM_BASE, LAW_SIZE_256M, LAW_TRGT_IF_DDR),
 #endif
-	SET_LAW(CFG_PCI1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI),
+	SET_LAW(CONFIG_SYS_PCI1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI),
 	/* This is not so much the SDRAM map as it is the whole localbus map. */
-	SET_LAW(CFG_LBC_SDRAM_BASE, LAW_SIZE_256M, LAW_TRGT_IF_LBC),
-	SET_LAW(CFG_PCI1_IO_PHYS, LAW_SIZE_16M, LAW_TRGT_IF_PCI),
-	SET_LAW(CFG_RIO_MEM_BASE, LAWAR_SIZE_512M, LAW_TRGT_IF_RIO),
+	SET_LAW(CONFIG_SYS_LBC_SDRAM_BASE, LAW_SIZE_256M, LAW_TRGT_IF_LBC),
+	SET_LAW(CONFIG_SYS_PCI1_IO_PHYS, LAW_SIZE_16M, LAW_TRGT_IF_PCI),
+	SET_LAW(CONFIG_SYS_RIO_MEM_BASE, LAWAR_SIZE_512M, LAW_TRGT_IF_RIO),
 };
 
 int num_law_entries = ARRAY_SIZE(law_table);
diff --git a/board/pm854/pm854.c b/board/pm854/pm854.c
index 7dbafb9a8..fed0ed431 100644
--- a/board/pm854/pm854.c
+++ b/board/pm854/pm854.c
@@ -27,6 +27,7 @@
 
 #include <common.h>
 #include <pci.h>
+#include <netdev.h>
 #include <asm/processor.h>
 #include <asm/mmu.h>
 #include <asm/immap_85xx.h>
@@ -45,7 +46,7 @@ long int fixed_sdram(void);
 int board_early_init_f (void)
 {
 #if defined(CONFIG_PCI)
-    volatile ccsr_pcix_t *pci = (void *)(CFG_MPC85xx_PCIX_ADDR);
+    volatile ccsr_pcix_t *pci = (void *)(CONFIG_SYS_MPC85xx_PCIX_ADDR);
 
     pci->peer &= 0xffffffdf; /* disable master abort */
 #endif
@@ -82,7 +83,7 @@ initdram(int board_type)
 
 #if defined(CONFIG_DDR_DLL)
 	{
-	    volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR);
+	    volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
 	    int i,x;
 
 	    x = 10;
@@ -132,8 +133,8 @@ initdram(int board_type)
 void
 local_bus_init(void)
 {
-	volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR);
-	volatile ccsr_lbc_t *lbc = (void *)(CFG_MPC85xx_LBC_ADDR);
+	volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+	volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR);
 
 	uint clkdiv;
 	uint lbc_hz;
@@ -143,8 +144,8 @@ local_bus_init(void)
 	 * Errata LBC11.
 	 * Fix Local Bus clock glitch when DLL is enabled.
 	 *
-	 * If localbus freq is < 66Mhz, DLL bypass mode must be used.
-	 * If localbus freq is > 133Mhz, DLL can be safely enabled.
+	 * If localbus freq is < 66MHz, DLL bypass mode must be used.
+	 * If localbus freq is > 133MHz, DLL can be safely enabled.
 	 * Between 66 and 133, the DLL is enabled with an override workaround.
 	 */
 
@@ -153,10 +154,10 @@ local_bus_init(void)
 	lbc_hz = sysinfo.freqSystemBus / 1000000 / clkdiv;
 
 	if (lbc_hz < 66) {
-		lbc->lcrr = CFG_LBC_LCRR | 0x80000000;	/* DLL Bypass */
+		lbc->lcrr = CONFIG_SYS_LBC_LCRR | 0x80000000;	/* DLL Bypass */
 
 	} else if (lbc_hz >= 133) {
-		lbc->lcrr = CFG_LBC_LCRR & (~0x80000000); /* DLL Enabled */
+		lbc->lcrr = CONFIG_SYS_LBC_LCRR & (~0x80000000); /* DLL Enabled */
 
 	} else {
 		/*
@@ -171,7 +172,7 @@ local_bus_init(void)
 			lbc->lcrr = 0x10000004;
 		}
 
-		lbc->lcrr = CFG_LBC_LCRR & (~0x80000000); /* DLL Enabled */
+		lbc->lcrr = CONFIG_SYS_LBC_LCRR & (~0x80000000); /* DLL Enabled */
 		udelay(200);
 
 		/*
@@ -185,11 +186,11 @@ local_bus_init(void)
 }
 
 
-#if defined(CFG_DRAM_TEST)
+#if defined(CONFIG_SYS_DRAM_TEST)
 int testdram (void)
 {
-	uint *pstart = (uint *) CFG_MEMTEST_START;
-	uint *pend = (uint *) CFG_MEMTEST_END;
+	uint *pstart = (uint *) CONFIG_SYS_MEMTEST_START;
+	uint *pend = (uint *) CONFIG_SYS_MEMTEST_END;
 	uint *p;
 
 	printf("SDRAM test phase 1:\n");
@@ -226,15 +227,15 @@ int testdram (void)
  ************************************************************************/
 long int fixed_sdram (void)
 {
-  #ifndef CFG_RAMBOOT
-	volatile ccsr_ddr_t *ddr= (void *)(CFG_MPC85xx_DDR_ADDR);
-
-	ddr->cs0_bnds = CFG_DDR_CS0_BNDS;
-	ddr->cs0_config = CFG_DDR_CS0_CONFIG;
-	ddr->timing_cfg_1 = CFG_DDR_TIMING_1;
-	ddr->timing_cfg_2 = CFG_DDR_TIMING_2;
-	ddr->sdram_mode = CFG_DDR_MODE;
-	ddr->sdram_interval = CFG_DDR_INTERVAL;
+  #ifndef CONFIG_SYS_RAMBOOT
+	volatile ccsr_ddr_t *ddr= (void *)(CONFIG_SYS_MPC85xx_DDR_ADDR);
+
+	ddr->cs0_bnds = CONFIG_SYS_DDR_CS0_BNDS;
+	ddr->cs0_config = CONFIG_SYS_DDR_CS0_CONFIG;
+	ddr->timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1;
+	ddr->timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2;
+	ddr->sdram_mode = CONFIG_SYS_DDR_MODE;
+	ddr->sdram_interval = CONFIG_SYS_DDR_INTERVAL;
     #if defined (CONFIG_DDR_ECC)
 	ddr->err_disable = 0x0000000D;
 	ddr->err_sbe = 0x00ff0000;
@@ -243,14 +244,14 @@ long int fixed_sdram (void)
 	udelay(500);
     #if defined (CONFIG_DDR_ECC)
 	/* Enable ECC checking */
-	ddr->sdram_cfg = (CFG_DDR_CONTROL | 0x20000000);
+	ddr->sdram_cfg = (CONFIG_SYS_DDR_CONTROL | 0x20000000);
     #else
-	ddr->sdram_cfg = CFG_DDR_CONTROL;
+	ddr->sdram_cfg = CONFIG_SYS_DDR_CONTROL;
     #endif
 	asm("sync; isync; msync");
 	udelay(500);
   #endif
-	return CFG_SDRAM_SIZE * 1024 * 1024;
+	return CONFIG_SYS_SDRAM_SIZE * 1024 * 1024;
 }
 #endif	/* !defined(CONFIG_SPD_EEPROM) */
 
@@ -289,3 +290,9 @@ pci_init_board(void)
 	pci_mpc85xx_init(&hose);
 #endif /* CONFIG_PCI */
 }
+
+int board_eth_init(bd_t *bis)
+{
+	cpu_eth_init(bis);	/* Intialize TSECs first */
+	return pci_eth_init(bis);
+}
diff --git a/board/pm854/tlb.c b/board/pm854/tlb.c
index a7f381350..5e74e2ded 100644
--- a/board/pm854/tlb.c
+++ b/board/pm854/tlb.c
@@ -28,16 +28,16 @@
 
 struct fsl_e_tlb_entry tlb_table[] = {
 	/* TLB 0 - for temp stack in cache */
-	SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR, CFG_INIT_RAM_ADDR,
+	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR, CONFIG_SYS_INIT_RAM_ADDR,
 		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
 		      0, 0, BOOKE_PAGESZ_4K, 0),
-	SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR + 4 * 1024 , CFG_INIT_RAM_ADDR + 4 * 1024,
+	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024 , CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024,
 		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
 		      0, 0, BOOKE_PAGESZ_4K, 0),
-	SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR + 8 * 1024 , CFG_INIT_RAM_ADDR + 8 * 1024,
+	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024 , CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024,
 		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
 		      0, 0, BOOKE_PAGESZ_4K, 0),
-	SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR + 12 * 1024 , CFG_INIT_RAM_ADDR + 12 * 1024,
+	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024 , CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024,
 		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
 		      0, 0, BOOKE_PAGESZ_4K, 0),
 
@@ -54,7 +54,7 @@ struct fsl_e_tlb_entry tlb_table[] = {
 	 * TLB 1:	256M	Non-cacheable, guarded
 	 * 0x80000000	256M	PCI1 MEM First half
 	 */
-	SET_TLB_ENTRY(1, CFG_PCI1_MEM_PHYS, CFG_PCI1_MEM_PHYS,
+	SET_TLB_ENTRY(1, CONFIG_SYS_PCI1_MEM_PHYS, CONFIG_SYS_PCI1_MEM_PHYS,
 		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 		      0, 1, BOOKE_PAGESZ_256M, 1),
 
@@ -62,7 +62,7 @@ struct fsl_e_tlb_entry tlb_table[] = {
 	 * TLB 2:	256M	Non-cacheable, guarded
 	 * 0x90000000	256M	PCI1 MEM Second half
 	 */
-	SET_TLB_ENTRY(1, CFG_PCI1_MEM_PHYS + 0x10000000, CFG_PCI1_MEM_PHYS + 0x10000000,
+	SET_TLB_ENTRY(1, CONFIG_SYS_PCI1_MEM_PHYS + 0x10000000, CONFIG_SYS_PCI1_MEM_PHYS + 0x10000000,
 		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 		      0, 2, BOOKE_PAGESZ_256M, 1),
 
@@ -70,7 +70,7 @@ struct fsl_e_tlb_entry tlb_table[] = {
 	 * TLB 3:	256M	Non-cacheable, guarded
 	 * 0xc0000000	256M	Rapid IO MEM First half
 	 */
-	SET_TLB_ENTRY(1, CFG_RIO_MEM_BASE, CFG_RIO_MEM_BASE,
+	SET_TLB_ENTRY(1, CONFIG_SYS_RIO_MEM_BASE, CONFIG_SYS_RIO_MEM_BASE,
 		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 		      0, 3, BOOKE_PAGESZ_256M, 1),
 
@@ -78,7 +78,7 @@ struct fsl_e_tlb_entry tlb_table[] = {
 	 * TLB 4:	256M	Non-cacheable, guarded
 	 * 0xd0000000	256M	Rapid IO MEM Second half
 	 */
-	SET_TLB_ENTRY(1, CFG_RIO_MEM_BASE + 0x10000000, CFG_RIO_MEM_BASE + 0x10000000,
+	SET_TLB_ENTRY(1, CONFIG_SYS_RIO_MEM_BASE + 0x10000000, CONFIG_SYS_RIO_MEM_BASE + 0x10000000,
 		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 		      0, 4, BOOKE_PAGESZ_256M, 1),
 
@@ -87,7 +87,7 @@ struct fsl_e_tlb_entry tlb_table[] = {
 	 * 0xe000_0000	1M	CCSRBAR
 	 * 0xe200_0000	16M	PCI1 IO
 	 */
-	SET_TLB_ENTRY(1, CFG_CCSRBAR, CFG_CCSRBAR_PHYS,
+	SET_TLB_ENTRY(1, CONFIG_SYS_CCSRBAR, CONFIG_SYS_CCSRBAR_PHYS,
 		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 		      0, 5, BOOKE_PAGESZ_64M, 1),
 
@@ -95,7 +95,7 @@ struct fsl_e_tlb_entry tlb_table[] = {
 	 * TLB 6:	64M	Cacheable, non-guarded
 	 * 0xf000_0000	64M	LBC SDRAM
 	 */
-	SET_TLB_ENTRY(1, CFG_LBC_SDRAM_BASE, CFG_LBC_SDRAM_BASE,
+	SET_TLB_ENTRY(1, CONFIG_SYS_LBC_SDRAM_BASE, CONFIG_SYS_LBC_SDRAM_BASE,
 		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
 		      0, 6, BOOKE_PAGESZ_64M, 1),
 
@@ -108,7 +108,7 @@ struct fsl_e_tlb_entry tlb_table[] = {
 	 * Likely it needs to be increased by two for these entries.
 	 */
 
-	SET_TLB_ENTRY(1, CFG_DDR_SDRAM_BASE, CFG_DDR_SDRAM_BASE,
+	SET_TLB_ENTRY(1, CONFIG_SYS_DDR_SDRAM_BASE, CONFIG_SYS_DDR_SDRAM_BASE,
 		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
 		      0, 7, BOOKE_PAGESZ_256M, 1),
 #endif
diff --git a/board/pm854/u-boot.lds b/board/pm854/u-boot.lds
index f200810f0..18cb27a7c 100644
--- a/board/pm854/u-boot.lds
+++ b/board/pm854/u-boot.lds
@@ -141,6 +141,7 @@ SECTIONS
    *(.dynbss)
    *(.bss)
    *(COMMON)
+   . = ALIGN(4);
   }
   _end = . ;
   PROVIDE (end = .);
diff --git a/board/pm856/ddr.c b/board/pm856/ddr.c
index 45372f427..7850794d6 100644
--- a/board/pm856/ddr.c
+++ b/board/pm856/ddr.c
@@ -10,6 +10,7 @@
 #include <i2c.h>
 
 #include <asm/fsl_ddr_sdram.h>
+#include <asm/fsl_ddr_dimm_params.h>
 
 static void
 get_spd(ddr1_spd_eeprom_t *spd, unsigned char i2c_address)
@@ -40,7 +41,9 @@ fsl_ddr_get_spd(ddr1_spd_eeprom_t *ctrl_dimms_spd,
 	}
 }
 
-void fsl_ddr_board_options(memctl_options_t *popts, unsigned int ctrl_num)
+void fsl_ddr_board_options(memctl_options_t *popts,
+				dimm_params_t *pdimm,
+				unsigned int ctrl_num)
 {
 	/*
 	 * Factors to consider for CPO:
diff --git a/board/pm856/law.c b/board/pm856/law.c
index d74d17abd..39e8dbbd5 100644
--- a/board/pm856/law.c
+++ b/board/pm856/law.c
@@ -46,13 +46,13 @@
 
 struct law_entry law_table[] = {
 #ifndef CONFIG_SPD_EEPROM
-	SET_LAW(CFG_DDR_SDRAM_BASE, LAW_SIZE_256M, LAW_TRGT_IF_DDR),
+	SET_LAW(CONFIG_SYS_DDR_SDRAM_BASE, LAW_SIZE_256M, LAW_TRGT_IF_DDR),
 #endif
-	SET_LAW(CFG_PCI1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI),
+	SET_LAW(CONFIG_SYS_PCI1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI),
 	/* This is not so much the SDRAM map as it is the whole localbus map. */
-	SET_LAW(CFG_LBC_SDRAM_BASE, LAW_SIZE_256M, LAW_TRGT_IF_LBC),
-	SET_LAW(CFG_PCI1_IO_PHYS, LAW_SIZE_16M, LAW_TRGT_IF_PCI),
-	SET_LAW(CFG_RIO_MEM_BASE, LAWAR_SIZE_512M, LAW_TRGT_IF_RIO),
+	SET_LAW(CONFIG_SYS_LBC_SDRAM_BASE, LAW_SIZE_256M, LAW_TRGT_IF_LBC),
+	SET_LAW(CONFIG_SYS_PCI1_IO_PHYS, LAW_SIZE_16M, LAW_TRGT_IF_PCI),
+	SET_LAW(CONFIG_SYS_RIO_MEM_BASE, LAWAR_SIZE_512M, LAW_TRGT_IF_RIO),
 };
 
 int num_law_entries = ARRAY_SIZE(law_table);
diff --git a/board/pm856/pm856.c b/board/pm856/pm856.c
index bd4c0651a..932f1121e 100644
--- a/board/pm856/pm856.c
+++ b/board/pm856/pm856.c
@@ -34,6 +34,7 @@
 #include <ioports.h>
 #include <spd_sdram.h>
 #include <miiphy.h>
+#include <netdev.h>
 
 #if defined(CONFIG_DDR_ECC)
 extern void ddr_enable_ecc(unsigned int dram_size);
@@ -237,7 +238,7 @@ initdram(int board_type)
 
 #if defined(CONFIG_DDR_DLL)
 	{
-	    volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR);
+	    volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
 	    int i,x;
 
 	    x = 10;
@@ -288,8 +289,8 @@ initdram(int board_type)
 void
 local_bus_init(void)
 {
-	volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR);
-	volatile ccsr_lbc_t *lbc = (void *)(CFG_MPC85xx_LBC_ADDR);
+	volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+	volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR);
 
 	uint clkdiv;
 	uint lbc_hz;
@@ -299,8 +300,8 @@ local_bus_init(void)
 	 * Errata LBC11.
 	 * Fix Local Bus clock glitch when DLL is enabled.
 	 *
-	 * If localbus freq is < 66Mhz, DLL bypass mode must be used.
-	 * If localbus freq is > 133Mhz, DLL can be safely enabled.
+	 * If localbus freq is < 66MHz, DLL bypass mode must be used.
+	 * If localbus freq is > 133MHz, DLL can be safely enabled.
 	 * Between 66 and 133, the DLL is enabled with an override workaround.
 	 */
 
@@ -309,10 +310,10 @@ local_bus_init(void)
 	lbc_hz = sysinfo.freqSystemBus / 1000000 / clkdiv;
 
 	if (lbc_hz < 66) {
-		lbc->lcrr = CFG_LBC_LCRR | 0x80000000;	/* DLL Bypass */
+		lbc->lcrr = CONFIG_SYS_LBC_LCRR | 0x80000000;	/* DLL Bypass */
 
 	} else if (lbc_hz >= 133) {
-		lbc->lcrr = CFG_LBC_LCRR & (~0x80000000); /* DLL Enabled */
+		lbc->lcrr = CONFIG_SYS_LBC_LCRR & (~0x80000000); /* DLL Enabled */
 
 	} else {
 		/*
@@ -327,7 +328,7 @@ local_bus_init(void)
 			lbc->lcrr = 0x10000004;
 		}
 
-		lbc->lcrr = CFG_LBC_LCRR & (~0x80000000);/* DLL Enabled */
+		lbc->lcrr = CONFIG_SYS_LBC_LCRR & (~0x80000000);/* DLL Enabled */
 		udelay(200);
 
 		/*
@@ -340,11 +341,11 @@ local_bus_init(void)
 	}
 }
 
-#if defined(CFG_DRAM_TEST)
+#if defined(CONFIG_SYS_DRAM_TEST)
 int testdram (void)
 {
-	uint *pstart = (uint *) CFG_MEMTEST_START;
-	uint *pend = (uint *) CFG_MEMTEST_END;
+	uint *pstart = (uint *) CONFIG_SYS_MEMTEST_START;
+	uint *pend = (uint *) CONFIG_SYS_MEMTEST_END;
 	uint *p;
 
 	printf("SDRAM test phase 1:\n");
@@ -381,15 +382,15 @@ int testdram (void)
  ************************************************************************/
 long int fixed_sdram (void)
 {
-  #ifndef CFG_RAMBOOT
-	volatile ccsr_ddr_t *ddr= (void *)(CFG_MPC85xx_DDR_ADDR);
-
-	ddr->cs0_bnds = CFG_DDR_CS0_BNDS;
-	ddr->cs0_config = CFG_DDR_CS0_CONFIG;
-	ddr->timing_cfg_1 = CFG_DDR_TIMING_1;
-	ddr->timing_cfg_2 = CFG_DDR_TIMING_2;
-	ddr->sdram_mode = CFG_DDR_MODE;
-	ddr->sdram_interval = CFG_DDR_INTERVAL;
+  #ifndef CONFIG_SYS_RAMBOOT
+	volatile ccsr_ddr_t *ddr= (void *)(CONFIG_SYS_MPC85xx_DDR_ADDR);
+
+	ddr->cs0_bnds = CONFIG_SYS_DDR_CS0_BNDS;
+	ddr->cs0_config = CONFIG_SYS_DDR_CS0_CONFIG;
+	ddr->timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1;
+	ddr->timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2;
+	ddr->sdram_mode = CONFIG_SYS_DDR_MODE;
+	ddr->sdram_interval = CONFIG_SYS_DDR_INTERVAL;
     #if defined (CONFIG_DDR_ECC)
 	ddr->err_disable = 0x0000000D;
 	ddr->err_sbe = 0x00ff0000;
@@ -398,14 +399,14 @@ long int fixed_sdram (void)
 	udelay(500);
     #if defined (CONFIG_DDR_ECC)
 	/* Enable ECC checking */
-	ddr->sdram_cfg = (CFG_DDR_CONTROL | 0x20000000);
+	ddr->sdram_cfg = (CONFIG_SYS_DDR_CONTROL | 0x20000000);
     #else
-	ddr->sdram_cfg = CFG_DDR_CONTROL;
+	ddr->sdram_cfg = CONFIG_SYS_DDR_CONTROL;
     #endif
 	asm("sync; isync; msync");
 	udelay(500);
   #endif
-	return CFG_SDRAM_SIZE * 1024 * 1024;
+	return CONFIG_SYS_SDRAM_SIZE * 1024 * 1024;
 }
 #endif	/* !defined(CONFIG_SPD_EEPROM) */
 
@@ -444,3 +445,9 @@ pci_init_board(void)
 	pci_mpc85xx_init(&hose);
 #endif /* CONFIG_PCI */
 }
+
+int board_eth_init(bd_t *bis)
+{
+	cpu_eth_init(bis);	/* Intialize TSECs first */
+	return pci_eth_init(bis);
+}
diff --git a/board/pm856/tlb.c b/board/pm856/tlb.c
index a7f381350..5e74e2ded 100644
--- a/board/pm856/tlb.c
+++ b/board/pm856/tlb.c
@@ -28,16 +28,16 @@
 
 struct fsl_e_tlb_entry tlb_table[] = {
 	/* TLB 0 - for temp stack in cache */
-	SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR, CFG_INIT_RAM_ADDR,
+	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR, CONFIG_SYS_INIT_RAM_ADDR,
 		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
 		      0, 0, BOOKE_PAGESZ_4K, 0),
-	SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR + 4 * 1024 , CFG_INIT_RAM_ADDR + 4 * 1024,
+	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024 , CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024,
 		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
 		      0, 0, BOOKE_PAGESZ_4K, 0),
-	SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR + 8 * 1024 , CFG_INIT_RAM_ADDR + 8 * 1024,
+	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024 , CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024,
 		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
 		      0, 0, BOOKE_PAGESZ_4K, 0),
-	SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR + 12 * 1024 , CFG_INIT_RAM_ADDR + 12 * 1024,
+	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024 , CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024,
 		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
 		      0, 0, BOOKE_PAGESZ_4K, 0),
 
@@ -54,7 +54,7 @@ struct fsl_e_tlb_entry tlb_table[] = {
 	 * TLB 1:	256M	Non-cacheable, guarded
 	 * 0x80000000	256M	PCI1 MEM First half
 	 */
-	SET_TLB_ENTRY(1, CFG_PCI1_MEM_PHYS, CFG_PCI1_MEM_PHYS,
+	SET_TLB_ENTRY(1, CONFIG_SYS_PCI1_MEM_PHYS, CONFIG_SYS_PCI1_MEM_PHYS,
 		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 		      0, 1, BOOKE_PAGESZ_256M, 1),
 
@@ -62,7 +62,7 @@ struct fsl_e_tlb_entry tlb_table[] = {
 	 * TLB 2:	256M	Non-cacheable, guarded
 	 * 0x90000000	256M	PCI1 MEM Second half
 	 */
-	SET_TLB_ENTRY(1, CFG_PCI1_MEM_PHYS + 0x10000000, CFG_PCI1_MEM_PHYS + 0x10000000,
+	SET_TLB_ENTRY(1, CONFIG_SYS_PCI1_MEM_PHYS + 0x10000000, CONFIG_SYS_PCI1_MEM_PHYS + 0x10000000,
 		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 		      0, 2, BOOKE_PAGESZ_256M, 1),
 
@@ -70,7 +70,7 @@ struct fsl_e_tlb_entry tlb_table[] = {
 	 * TLB 3:	256M	Non-cacheable, guarded
 	 * 0xc0000000	256M	Rapid IO MEM First half
 	 */
-	SET_TLB_ENTRY(1, CFG_RIO_MEM_BASE, CFG_RIO_MEM_BASE,
+	SET_TLB_ENTRY(1, CONFIG_SYS_RIO_MEM_BASE, CONFIG_SYS_RIO_MEM_BASE,
 		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 		      0, 3, BOOKE_PAGESZ_256M, 1),
 
@@ -78,7 +78,7 @@ struct fsl_e_tlb_entry tlb_table[] = {
 	 * TLB 4:	256M	Non-cacheable, guarded
 	 * 0xd0000000	256M	Rapid IO MEM Second half
 	 */
-	SET_TLB_ENTRY(1, CFG_RIO_MEM_BASE + 0x10000000, CFG_RIO_MEM_BASE + 0x10000000,
+	SET_TLB_ENTRY(1, CONFIG_SYS_RIO_MEM_BASE + 0x10000000, CONFIG_SYS_RIO_MEM_BASE + 0x10000000,
 		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 		      0, 4, BOOKE_PAGESZ_256M, 1),
 
@@ -87,7 +87,7 @@ struct fsl_e_tlb_entry tlb_table[] = {
 	 * 0xe000_0000	1M	CCSRBAR
 	 * 0xe200_0000	16M	PCI1 IO
 	 */
-	SET_TLB_ENTRY(1, CFG_CCSRBAR, CFG_CCSRBAR_PHYS,
+	SET_TLB_ENTRY(1, CONFIG_SYS_CCSRBAR, CONFIG_SYS_CCSRBAR_PHYS,
 		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 		      0, 5, BOOKE_PAGESZ_64M, 1),
 
@@ -95,7 +95,7 @@ struct fsl_e_tlb_entry tlb_table[] = {
 	 * TLB 6:	64M	Cacheable, non-guarded
 	 * 0xf000_0000	64M	LBC SDRAM
 	 */
-	SET_TLB_ENTRY(1, CFG_LBC_SDRAM_BASE, CFG_LBC_SDRAM_BASE,
+	SET_TLB_ENTRY(1, CONFIG_SYS_LBC_SDRAM_BASE, CONFIG_SYS_LBC_SDRAM_BASE,
 		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
 		      0, 6, BOOKE_PAGESZ_64M, 1),
 
@@ -108,7 +108,7 @@ struct fsl_e_tlb_entry tlb_table[] = {
 	 * Likely it needs to be increased by two for these entries.
 	 */
 
-	SET_TLB_ENTRY(1, CFG_DDR_SDRAM_BASE, CFG_DDR_SDRAM_BASE,
+	SET_TLB_ENTRY(1, CONFIG_SYS_DDR_SDRAM_BASE, CONFIG_SYS_DDR_SDRAM_BASE,
 		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
 		      0, 7, BOOKE_PAGESZ_256M, 1),
 #endif
diff --git a/board/pm856/u-boot.lds b/board/pm856/u-boot.lds
index 01727d177..e9c6a12d0 100644
--- a/board/pm856/u-boot.lds
+++ b/board/pm856/u-boot.lds
@@ -141,6 +141,7 @@ SECTIONS
    *(.dynbss)
    *(.bss)
    *(COMMON)
+   . = ALIGN(4);
   }
   _end = . ;
   PROVIDE (end = .);
diff --git a/board/pn62/pn62.c b/board/pn62/pn62.c
index d905b2965..1b545bfa9 100644
--- a/board/pn62/pn62.c
+++ b/board/pn62/pn62.c
@@ -23,6 +23,7 @@
 #include <common.h>
 #include <mpc824x.h>
 #include <pci.h>
+#include <netdev.h>
 
 #include "pn62.h"
 
@@ -84,7 +85,7 @@ phys_size_t initdram (int board_type)
 
 	show_startup_phase (2);
 
-	size = get_ram_size(CFG_SDRAM_BASE, CFG_MAX_RAM_SIZE);
+	size = get_ram_size(CONFIG_SYS_SDRAM_BASE, CONFIG_SYS_MAX_RAM_SIZE);
 
 	new_bank0_end = size - 1;
 	mear1 = mpc824x_mpc107_getreg (MEAR1);
@@ -186,3 +187,8 @@ static int get_mac_address (int id, u8 * mac, char *string, int size)
 				mac[0], mac[1], mac[2],
 				mac[3], mac[4], mac[5]);
 }
+
+int board_eth_init(bd_t *bis)
+{
+	return pci_eth_init(bis);
+}
diff --git a/board/ppmc7xx/flash.c b/board/ppmc7xx/flash.c
index 4be6f1364..e7242271d 100644
--- a/board/ppmc7xx/flash.c
+++ b/board/ppmc7xx/flash.c
@@ -19,7 +19,7 @@
 static int	write_dword (flash_info_t* info, ulong dest, unsigned char *pdata);
 static void	write_via_fpu (volatile DWORD* addr, DWORD* data);
 
-flash_info_t flash_info[CFG_MAX_FLASH_BANKS];
+flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];
 
 /*-----------------------------------------------------------------------
  */
@@ -177,12 +177,12 @@ unsigned long flash_init (void)
 	int i;
 
 	/* Init: no FLASHes known */
-	for (i = 0; i < CFG_MAX_FLASH_BANKS; ++i) {
+	for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
 		flash_info[i].flash_id = FLASH_UNKNOWN;
 	}
 
 	/* Static FLASH Bank configuration here (only one bank) */
-	size_b0 = flash_get_size (CFG_FLASH_BASE, &flash_info[0]);
+	size_b0 = flash_get_size (CONFIG_SYS_FLASH_BASE, &flash_info[0]);
 	if (flash_info[0].flash_id == FLASH_UNKNOWN || size_b0 == 0) {
 		printf ("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n",
 				size_b0, size_b0 >> 20);
@@ -191,19 +191,19 @@ unsigned long flash_init (void)
 	/*
 	 * protect monitor and environment sectors
 	 */
-#if CFG_MONITOR_BASE >= CFG_FLASH_BASE
+#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE
 	flash_protect (FLAG_PROTECT_SET,
-		       CFG_MONITOR_BASE,
-		       CFG_MONITOR_BASE + monitor_flash_len - 1, &flash_info[0]);
+		       CONFIG_SYS_MONITOR_BASE,
+		       CONFIG_SYS_MONITOR_BASE + monitor_flash_len - 1, &flash_info[0]);
 #endif
 
-#if (CFG_ENV_IS_IN_FLASH == 1) && defined(CFG_ENV_ADDR)
-# ifndef  CFG_ENV_SIZE
-#  define CFG_ENV_SIZE	CFG_ENV_SECT_SIZE
+#if defined(CONFIG_ENV_IS_IN_FLASH) && defined(CONFIG_ENV_ADDR)
+# ifndef  CONFIG_ENV_SIZE
+#  define CONFIG_ENV_SIZE	CONFIG_ENV_SECT_SIZE
 # endif
 	flash_protect (FLAG_PROTECT_SET,
-		       CFG_ENV_ADDR,
-		       CFG_ENV_ADDR + CFG_ENV_SIZE - 1, &flash_info[0]);
+		       CONFIG_ENV_ADDR,
+		       CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1, &flash_info[0]);
 #endif
 
 	return (size_b0);
@@ -359,7 +359,7 @@ int flash_erase (flash_info_t * info, int s_first, int s_last)
 	while ((*(volatile DWORD*)info->start[l_sect] & 0x0080008000800080LL )
 				!= 0x0080008000800080LL )
 	{
-		if ((now = get_timer (start)) > CFG_FLASH_ERASE_TOUT) {
+		if ((now = get_timer (start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
 			printf ("Timeout\n");
 			return 1;
 		}
@@ -477,7 +477,7 @@ static int write_dword (flash_info_t * info, ulong dest, unsigned char *pdata)
 	/* data polling for D7 */
 	start = get_timer (0);
 	while (*(volatile DWORD*)dest != data ) {
-		if (get_timer (start) > CFG_FLASH_WRITE_TOUT) {
+		if (get_timer (start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
 			return (1);
 		}
 	}
diff --git a/board/ppmc7xx/pci.c b/board/ppmc7xx/pci.c
index 5b115ea61..bf133b77d 100644
--- a/board/ppmc7xx/pci.c
+++ b/board/ppmc7xx/pci.c
@@ -42,37 +42,37 @@ void pci_init_board(void)
     hose->last_busno = 0xff;
 
     pci_set_region(hose->regions + 0,
-	CFG_PCI_MEMORY_BUS,
-	CFG_PCI_MEMORY_PHYS,
-	CFG_PCI_MEMORY_SIZE,
+	CONFIG_SYS_PCI_MEMORY_BUS,
+	CONFIG_SYS_PCI_MEMORY_PHYS,
+	CONFIG_SYS_PCI_MEMORY_SIZE,
 	PCI_REGION_MEM | PCI_REGION_MEMORY);
 
     /* PCI memory space */
     pci_set_region(hose->regions + 1,
-	CFG_PCI_MEM_BUS,
-	CFG_PCI_MEM_PHYS,
-	CFG_PCI_MEM_SIZE,
+	CONFIG_SYS_PCI_MEM_BUS,
+	CONFIG_SYS_PCI_MEM_PHYS,
+	CONFIG_SYS_PCI_MEM_SIZE,
 	PCI_REGION_MEM);
 
     /* ISA/PCI memory space */
     pci_set_region(hose->regions + 2,
-	CFG_ISA_MEM_BUS,
-	CFG_ISA_MEM_PHYS,
-	CFG_ISA_MEM_SIZE,
+	CONFIG_SYS_ISA_MEM_BUS,
+	CONFIG_SYS_ISA_MEM_PHYS,
+	CONFIG_SYS_ISA_MEM_SIZE,
 	PCI_REGION_MEM);
 
     /* PCI I/O space */
     pci_set_region(hose->regions + 3,
-	CFG_PCI_IO_BUS,
-	CFG_PCI_IO_PHYS,
-	CFG_PCI_IO_SIZE,
+	CONFIG_SYS_PCI_IO_BUS,
+	CONFIG_SYS_PCI_IO_PHYS,
+	CONFIG_SYS_PCI_IO_SIZE,
 	PCI_REGION_IO);
 
     /* ISA/PCI I/O space */
     pci_set_region(hose->regions + 4,
-	CFG_ISA_IO_BUS,
-	CFG_ISA_IO_PHYS,
-	CFG_ISA_IO_SIZE,
+	CONFIG_SYS_ISA_IO_BUS,
+	CONFIG_SYS_ISA_IO_PHYS,
+	CONFIG_SYS_ISA_IO_SIZE,
 	PCI_REGION_IO);
 
     hose->region_count = 5;
diff --git a/board/ppmc7xx/ppmc7xx.c b/board/ppmc7xx/ppmc7xx.c
index 061e01ec4..944cd4ddc 100644
--- a/board/ppmc7xx/ppmc7xx.c
+++ b/board/ppmc7xx/ppmc7xx.c
@@ -10,6 +10,7 @@
 
 #include <common.h>
 #include <command.h>
+#include <netdev.h>
 
 
 /* Define some MPC107 (memory controller) registers */
@@ -31,7 +32,7 @@ extern void _start_warm(void);
  */
 phys_size_t initdram( int board_type )
 {
-    return CFG_SDRAM_SIZE;
+    return CONFIG_SYS_SDRAM_SIZE;
 }
 
 
@@ -102,3 +103,8 @@ void do_reset( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[] )
 	/* Should never get here */
 	while(1);
 }
+
+int board_eth_init(bd_t *bis)
+{
+	return pci_eth_init(bis);
+}
diff --git a/board/ppmc7xx/u-boot.lds b/board/ppmc7xx/u-boot.lds
index 5239b35af..ca2e30016 100644
--- a/board/ppmc7xx/u-boot.lds
+++ b/board/ppmc7xx/u-boot.lds
@@ -60,7 +60,7 @@ SECTIONS
 
 /* store the environment in a seperate sector in the boot flash */
 /*    . = env_offset; */
-/*    common/environment.o(.text) */
+/*    common/env_embedded.o(.text) */
 
     *(.text)
     *(.fixup)
@@ -128,6 +128,7 @@ SECTIONS
    *(.dynbss)
    *(.bss)
    *(COMMON)
+   . = ALIGN(4);
   }
   _end = . ;
   PROVIDE (end = .);
diff --git a/board/ppmc8260/ppmc8260.c b/board/ppmc8260/ppmc8260.c
index f3c85096b..1808abdcb 100644
--- a/board/ppmc8260/ppmc8260.c
+++ b/board/ppmc8260/ppmc8260.c
@@ -201,14 +201,14 @@ int checkboard (void)
 
 phys_size_t initdram (int board_type)
 {
-	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
 	volatile memctl8260_t *memctl = &immap->im_memctl;
 	volatile uchar c = 0xff;
-	volatile uchar *ramaddr0 = (uchar *) (CFG_SDRAM0_BASE);
-	volatile uchar *ramaddr1 = (uchar *) (CFG_SDRAM1_BASE);
-	ulong psdmr = CFG_PSDMR;
-	volatile uchar *ramaddr2 = (uchar *) (CFG_SDRAM2_BASE);
-	ulong lsdmr = CFG_LSDMR;
+	volatile uchar *ramaddr0 = (uchar *) (CONFIG_SYS_SDRAM0_BASE);
+	volatile uchar *ramaddr1 = (uchar *) (CONFIG_SYS_SDRAM1_BASE);
+	ulong psdmr = CONFIG_SYS_PSDMR;
+	volatile uchar *ramaddr2 = (uchar *) (CONFIG_SYS_SDRAM2_BASE);
+	ulong lsdmr = CONFIG_SYS_LSDMR;
 	int i;
 
 	/*
@@ -228,13 +228,13 @@ phys_size_t initdram (int board_type)
 	 *  accessing the SDRAM with a single-byte transaction."
 	 *
 	 * The appropriate BRx/ORx registers have already been set when we
-	 * get here. The SDRAM can be accessed at the address CFG_SDRAM_BASE.
+	 * get here. The SDRAM can be accessed at the address CONFIG_SYS_SDRAM_BASE.
 	 */
 
-	memctl->memc_psrt = CFG_PSRT;
-	memctl->memc_mptpr = CFG_MPTPR;
+	memctl->memc_psrt = CONFIG_SYS_PSRT;
+	memctl->memc_mptpr = CONFIG_SYS_MPTPR;
 
-#ifndef CFG_RAMBOOT
+#ifndef CONFIG_SYS_RAMBOOT
 	memctl->memc_psdmr = psdmr | PSDMR_OP_PREA;
 	*ramaddr0++ = c;
 	*ramaddr1++ = c;
@@ -246,8 +246,8 @@ phys_size_t initdram (int board_type)
 	}
 
 	memctl->memc_psdmr = psdmr | PSDMR_OP_MRW;
-	ramaddr0 = (uchar *) (CFG_SDRAM0_BASE + 0x110);
-	ramaddr1 = (uchar *) (CFG_SDRAM1_BASE + 0x110);
+	ramaddr0 = (uchar *) (CONFIG_SYS_SDRAM0_BASE + 0x110);
+	ramaddr1 = (uchar *) (CONFIG_SYS_SDRAM1_BASE + 0x110);
 	*ramaddr0 = c;
 	*ramaddr1 = c;
 
@@ -271,15 +271,15 @@ phys_size_t initdram (int board_type)
 #endif
 
 	/* return total ram size */
-	return ((CFG_SDRAM0_SIZE + CFG_SDRAM1_SIZE) * 1024 * 1024);
+	return ((CONFIG_SYS_SDRAM0_SIZE + CONFIG_SYS_SDRAM1_SIZE) * 1024 * 1024);
 }
 
 #ifdef CONFIG_MISC_INIT_R
 /* ------------------------------------------------------------------------- */
 int misc_init_r (void)
 {
-#ifdef CFG_LED_BASE
-	uchar ds = *(unsigned char *) (CFG_LED_BASE + 1);
+#ifdef CONFIG_SYS_LED_BASE
+	uchar ds = *(unsigned char *) (CONFIG_SYS_LED_BASE + 1);
 	uchar ss;
 	uchar tmp[64];
 	int res;
@@ -298,10 +298,10 @@ int misc_init_r (void)
 			tmp[17] = '\0';
 			setenv ("ethaddr", (char *)tmp);
 			/* set the led to show the address */
-			*((unsigned char *) (CFG_LED_BASE + 1)) = ds;
+			*((unsigned char *) (CONFIG_SYS_LED_BASE + 1)) = ds;
 		}
 	}
-#endif /* CFG_LED_BASE */
+#endif /* CONFIG_SYS_LED_BASE */
 	return (0);
 }
 #endif /* CONFIG_MISC_INIT_R */
diff --git a/board/ppmc8260/strataflash.c b/board/ppmc8260/strataflash.c
index f9abfac73..cc91627f0 100644
--- a/board/ppmc8260/strataflash.c
+++ b/board/ppmc8260/strataflash.c
@@ -104,7 +104,7 @@ typedef union {
 
 #define NUM_ERASE_REGIONS 4
 
-flash_info_t	flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips	*/
+flash_info_t	flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips	*/
 
 
 /*-----------------------------------------------------------------------
@@ -121,7 +121,7 @@ static int flash_detect_cfi(flash_info_t * info);
 static ulong flash_get_size (ulong base, int banknum);
 static int flash_write_cfiword (flash_info_t *info, ulong dest, cfiword_t cword);
 static int flash_full_status_check(flash_info_t * info, ulong sector, ulong tout, char * prompt);
-#ifdef CFG_FLASH_USE_BUFFER_WRITE
+#ifdef CONFIG_SYS_FLASH_USE_BUFFER_WRITE
 static int flash_write_cfibuffer(flash_info_t * info, ulong dest, uchar * cp, int len);
 #endif
 /*-----------------------------------------------------------------------
@@ -181,15 +181,15 @@ unsigned long flash_init (void)
 	 *
 	 */
 
-	address = CFG_FLASH_BASE;
+	address = CONFIG_SYS_FLASH_BASE;
 	size = 0;
 
 
 	/* Init: no FLASHes known */
-	for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) {
+	for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
 		flash_info[i].flash_id = FLASH_UNKNOWN;
 		size += flash_info[i].size = flash_get_size(address, i);
-		address += CFG_FLASH_INCREMENT;
+		address += CONFIG_SYS_FLASH_INCREMENT;
 		if (flash_info[0].flash_id == FLASH_UNKNOWN) {
 			printf ("## Unknown FLASH on Bank %d - Size = 0x%08lx = %ld MB\n",i,
 				flash_info[0].size, flash_info[i].size<<20);
@@ -197,8 +197,8 @@ unsigned long flash_init (void)
 	}
 
 	/* Monitor protection ON by default */
-#if (CFG_MONITOR_BASE >= CFG_FLASH_BASE)
-	for(i=0; flash_info[0].start[i] < CFG_MONITOR_BASE+monitor_flash_len-1; i++)
+#if (CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE)
+	for(i=0; flash_info[0].start[i] < CONFIG_SYS_MONITOR_BASE+monitor_flash_len-1; i++)
 		(void)flash_real_protect(&flash_info[0], i, 1);
 #endif
 
@@ -319,7 +319,7 @@ int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
 		wp = cp;
 	}
 
-#ifdef CFG_FLASH_USE_BUFFER_WRITE
+#ifdef CONFIG_SYS_FLASH_USE_BUFFER_WRITE
 	while(cnt >= info->portwidth) {
 		i = info->buffer_size > cnt? cnt: info->buffer_size;
 		if((rc = flash_write_cfibuffer(info, wp, src,i)) != ERR_OK)
@@ -340,7 +340,7 @@ int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
 		wp += info->portwidth;
 		cnt -= info->portwidth;
 	}
-#endif /* CFG_FLASH_USE_BUFFER_WRITE */
+#endif /* CONFIG_SYS_FLASH_USE_BUFFER_WRITE */
 	if (cnt == 0) {
 		return (0);
 	}
@@ -679,7 +679,7 @@ static int flash_write_cfiword (flash_info_t *info, ulong dest, cfiword_t cword)
 	return flash_full_status_check(info, 0, info->write_tout, "write");
 }
 
-#ifdef CFG_FLASH_USE_BUFFER_WRITE
+#ifdef CONFIG_SYS_FLASH_USE_BUFFER_WRITE
 
 /* loop through the sectors from the highest address
  * when the passed address is greater or equal to the sector address
@@ -749,4 +749,4 @@ static int flash_write_cfibuffer(flash_info_t * info, ulong dest, uchar * cp, in
 	flash_write_cmd(info, sector, 0, FLASH_CMD_CLEAR_STATUS);
 	return retcode;
 }
-#endif /* CFG_USE_FLASH_BUFFER_WRITE */
+#endif /* CONFIG_SYS_USE_FLASH_BUFFER_WRITE */
diff --git a/board/prodrive/alpr/alpr.c b/board/prodrive/alpr/alpr.c
index cc491d05b..dc3431961 100644
--- a/board/prodrive/alpr/alpr.c
+++ b/board/prodrive/alpr/alpr.c
@@ -92,8 +92,8 @@ int board_early_init_f (void)
 	mtdcr (uic0vr, 0x00000001); /* */
 
 	/* Setup shutdown/SSD empty interrupt as inputs */
-	out32(GPIO0_TCR, in32(GPIO0_TCR) & ~(CFG_GPIO_SHUTDOWN | CFG_GPIO_SSD_EMPTY));
-	out32(GPIO0_ODR, in32(GPIO0_ODR) & ~(CFG_GPIO_SHUTDOWN | CFG_GPIO_SSD_EMPTY));
+	out32(GPIO0_TCR, in32(GPIO0_TCR) & ~(CONFIG_SYS_GPIO_SHUTDOWN | CONFIG_SYS_GPIO_SSD_EMPTY));
+	out32(GPIO0_ODR, in32(GPIO0_ODR) & ~(CONFIG_SYS_GPIO_SHUTDOWN | CONFIG_SYS_GPIO_SSD_EMPTY));
 
 	/* Setup GPIO/IRQ multiplexing */
 	mtsdr(sdr_pfc0, 0x01a33e00);
@@ -124,8 +124,8 @@ int last_stage_init(void)
 static int board_rev(void)
 {
 	/* Setup as input */
-	out32(GPIO0_TCR, in32(GPIO0_TCR) & ~(CFG_GPIO_REV0 | CFG_GPIO_REV1));
-	out32(GPIO0_ODR, in32(GPIO0_ODR) & ~(CFG_GPIO_REV0 | CFG_GPIO_REV1));
+	out32(GPIO0_TCR, in32(GPIO0_TCR) & ~(CONFIG_SYS_GPIO_REV0 | CONFIG_SYS_GPIO_REV1));
+	out32(GPIO0_ODR, in32(GPIO0_ODR) & ~(CONFIG_SYS_GPIO_REV0 | CONFIG_SYS_GPIO_REV1));
 
 	return (in32(GPIO0_IR) >> 16) & 0x3;
 }
@@ -186,7 +186,7 @@ int pci_pre_init(struct pci_controller * hose )
  *	may not be sufficient for a given board.
  *
  ************************************************************************/
-#if defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT)
+#if defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT)
 void pci_target_init(struct pci_controller * hose )
 {
 	/*--------------------------------------------------------------------------+
@@ -201,7 +201,7 @@ void pci_target_init(struct pci_controller * hose )
 	 * Map all of SDRAM to PCI address 0x0000_0000. Note that the 440 strapping
 	 * options to not support sizes such as 128/256 MB.
 	 *--------------------------------------------------------------------------*/
-	out32r( PCIX0_PIM0LAL, CFG_SDRAM_BASE );
+	out32r( PCIX0_PIM0LAL, CONFIG_SYS_SDRAM_BASE );
 	out32r( PCIX0_PIM0LAH, 0 );
 	out32r( PCIX0_PIM0SA, ~(gd->ram_size - 1) | 1 );
 
@@ -210,12 +210,12 @@ void pci_target_init(struct pci_controller * hose )
 	/*--------------------------------------------------------------------------+
 	 * Program the board's subsystem id/vendor id
 	 *--------------------------------------------------------------------------*/
-	out16r( PCIX0_SBSYSVID, CFG_PCI_SUBSYS_VENDORID );
-	out16r( PCIX0_SBSYSID, CFG_PCI_SUBSYS_DEVICEID );
+	out16r( PCIX0_SBSYSVID, CONFIG_SYS_PCI_SUBSYS_VENDORID );
+	out16r( PCIX0_SBSYSID, CONFIG_SYS_PCI_SUBSYS_DEVICEID );
 
 	out16r( PCIX0_CMD, in16r(PCIX0_CMD) | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER);
 }
-#endif /* defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT) */
+#endif /* defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT) */
 
 /*************************************************************************
  *  is_pci_host
@@ -239,11 +239,11 @@ static void wait_for_pci_ready(void)
 	/*
 	 * Configure EREADY as input
 	 */
-	out32(GPIO0_TCR, in32(GPIO0_TCR) & ~CFG_GPIO_EREADY);
+	out32(GPIO0_TCR, in32(GPIO0_TCR) & ~CONFIG_SYS_GPIO_EREADY);
 	udelay(1000);
 
 	for (;;) {
-		if (in32(GPIO0_IR) & CFG_GPIO_EREADY)
+		if (in32(GPIO0_IR) & CONFIG_SYS_GPIO_EREADY)
 			return;
 	}
 
@@ -260,7 +260,7 @@ int is_pci_host(struct pci_controller *hose)
  *  pci_master_init
  *
  ************************************************************************/
-#if defined(CONFIG_PCI) && defined(CFG_PCI_MASTER_INIT)
+#if defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_MASTER_INIT)
 void pci_master_init(struct pci_controller *hose)
 {
 	/*--------------------------------------------------------------------------+
@@ -274,19 +274,19 @@ void pci_master_init(struct pci_controller *hose)
 	out32r( PCIX0_POM1SA, 0 ); /* disable */
 	out32r( PCIX0_POM2SA, 0 ); /* disable */
 
-	out32r(PCIX0_POM0LAL, CFG_PCI_MEMBASE);	/* PMM0 Local Address */
+	out32r(PCIX0_POM0LAL, CONFIG_SYS_PCI_MEMBASE);	/* PMM0 Local Address */
 	out32r(PCIX0_POM0LAH, 0x00000003);	/* PMM0 Local Address */
-	out32r(PCIX0_POM0PCIAL, CFG_PCI_MEMBASE);	/* PMM0 PCI Low Address */
+	out32r(PCIX0_POM0PCIAL, CONFIG_SYS_PCI_MEMBASE);	/* PMM0 PCI Low Address */
 	out32r(PCIX0_POM0PCIAH, 0x00000000);	/* PMM0 PCI High Address */
 	out32r(PCIX0_POM0SA, ~(0x10000000 - 1) | 1);	/* 256MB + enable region */
 
-	out32r(PCIX0_POM1LAL, CFG_PCI_MEMBASE2);	/* PMM0 Local Address */
+	out32r(PCIX0_POM1LAL, CONFIG_SYS_PCI_MEMBASE2);	/* PMM0 Local Address */
 	out32r(PCIX0_POM1LAH, 0x00000003);	/* PMM0 Local Address */
-	out32r(PCIX0_POM1PCIAL, CFG_PCI_MEMBASE2);	/* PMM0 PCI Low Address */
+	out32r(PCIX0_POM1PCIAL, CONFIG_SYS_PCI_MEMBASE2);	/* PMM0 PCI Low Address */
 	out32r(PCIX0_POM1PCIAH, 0x00000000);	/* PMM0 PCI High Address */
 	out32r(PCIX0_POM1SA, ~(0x10000000 - 1) | 1);	/* 256MB + enable region */
 }
-#endif				/* defined(CONFIG_PCI) && defined(CFG_PCI_MASTER_INIT) */
+#endif				/* defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_MASTER_INIT) */
 
 #ifdef CONFIG_POST
 /*
diff --git a/board/prodrive/alpr/config.mk b/board/prodrive/alpr/config.mk
index 9e1833591..b62e776d3 100644
--- a/board/prodrive/alpr/config.mk
+++ b/board/prodrive/alpr/config.mk
@@ -40,5 +40,5 @@ PLATFORM_CPPFLAGS += -DDEBUG
 endif
 
 ifeq ($(dbcr),1)
-PLATFORM_CPPFLAGS += -DCFG_INIT_DBCR=0x8cff0000
+PLATFORM_CPPFLAGS += -DCONFIG_SYS_INIT_DBCR=0x8cff0000
 endif
diff --git a/board/prodrive/alpr/fpga.c b/board/prodrive/alpr/fpga.c
index e94360f81..0ecebc943 100644
--- a/board/prodrive/alpr/fpga.c
+++ b/board/prodrive/alpr/fpga.c
@@ -61,10 +61,10 @@ static unsigned long regval;
 #define	SET_GPIO_0(bit)		SET_GPIO_REG_0(GPIO0_OR, bit)
 #define	SET_GPIO_1(bit)		SET_GPIO_REG_1(GPIO0_OR, bit)
 
-#define FPGA_PRG		(0x80000000 >> CFG_GPIO_PROG_EN)
-#define FPGA_CONFIG		(0x80000000 >> CFG_GPIO_CONFIG)
-#define FPGA_DATA		(0x80000000 >> CFG_GPIO_DATA)
-#define FPGA_CLK		(0x80000000 >> CFG_GPIO_CLK)
+#define FPGA_PRG		(0x80000000 >> CONFIG_SYS_GPIO_PROG_EN)
+#define FPGA_CONFIG		(0x80000000 >> CONFIG_SYS_GPIO_CONFIG)
+#define FPGA_DATA		(0x80000000 >> CONFIG_SYS_GPIO_DATA)
+#define FPGA_CLK		(0x80000000 >> CONFIG_SYS_GPIO_CLK)
 #define OLD_VAL			(FPGA_PRG | FPGA_CONFIG)
 
 #define SET_FPGA(data)		out32(GPIO0_OR, data)
@@ -87,43 +87,43 @@ int fpga_pre_fn (int cookie)
 
 	reg = in32(GPIO0_IR);
 	/* Enable the FPGA Chain */
-	SET_GPIO_REG_1(GPIO0_TCR, CFG_GPIO_PROG_EN);
-	SET_GPIO_REG_0(GPIO0_ODR, CFG_GPIO_PROG_EN);
-	SET_GPIO_1(CFG_GPIO_PROG_EN);
-	SET_GPIO_REG_1(GPIO0_TCR, CFG_GPIO_SEL_DPR);
-	SET_GPIO_REG_0(GPIO0_ODR, CFG_GPIO_SEL_DPR);
-	SET_GPIO_0((CFG_GPIO_SEL_DPR));
+	SET_GPIO_REG_1(GPIO0_TCR, CONFIG_SYS_GPIO_PROG_EN);
+	SET_GPIO_REG_0(GPIO0_ODR, CONFIG_SYS_GPIO_PROG_EN);
+	SET_GPIO_1(CONFIG_SYS_GPIO_PROG_EN);
+	SET_GPIO_REG_1(GPIO0_TCR, CONFIG_SYS_GPIO_SEL_DPR);
+	SET_GPIO_REG_0(GPIO0_ODR, CONFIG_SYS_GPIO_SEL_DPR);
+	SET_GPIO_0((CONFIG_SYS_GPIO_SEL_DPR));
 
 	/* initialize the GPIO Pins */
 	/* output */
-	SET_GPIO_0(CFG_GPIO_CLK);
-	SET_GPIO_REG_1(GPIO0_TCR, CFG_GPIO_CLK);
-	SET_GPIO_REG_0(GPIO0_ODR, CFG_GPIO_CLK);
+	SET_GPIO_0(CONFIG_SYS_GPIO_CLK);
+	SET_GPIO_REG_1(GPIO0_TCR, CONFIG_SYS_GPIO_CLK);
+	SET_GPIO_REG_0(GPIO0_ODR, CONFIG_SYS_GPIO_CLK);
 
 	/* output */
-	SET_GPIO_0(CFG_GPIO_DATA);
-	SET_GPIO_REG_1(GPIO0_TCR, CFG_GPIO_DATA);
-	SET_GPIO_REG_0(GPIO0_ODR, CFG_GPIO_DATA);
+	SET_GPIO_0(CONFIG_SYS_GPIO_DATA);
+	SET_GPIO_REG_1(GPIO0_TCR, CONFIG_SYS_GPIO_DATA);
+	SET_GPIO_REG_0(GPIO0_ODR, CONFIG_SYS_GPIO_DATA);
 
 	/* First we set STATUS to 0 then as an input */
-	SET_GPIO_REG_1(GPIO0_TCR, CFG_GPIO_STATUS);
-	SET_GPIO_REG_0(GPIO0_ODR, CFG_GPIO_STATUS);
-	SET_GPIO_0(CFG_GPIO_STATUS);
-	SET_GPIO_REG_0(GPIO0_TCR, CFG_GPIO_STATUS);
-	SET_GPIO_REG_0(GPIO0_ODR, CFG_GPIO_STATUS);
+	SET_GPIO_REG_1(GPIO0_TCR, CONFIG_SYS_GPIO_STATUS);
+	SET_GPIO_REG_0(GPIO0_ODR, CONFIG_SYS_GPIO_STATUS);
+	SET_GPIO_0(CONFIG_SYS_GPIO_STATUS);
+	SET_GPIO_REG_0(GPIO0_TCR, CONFIG_SYS_GPIO_STATUS);
+	SET_GPIO_REG_0(GPIO0_ODR, CONFIG_SYS_GPIO_STATUS);
 
 	/* output */
-	SET_GPIO_REG_1(GPIO0_TCR, CFG_GPIO_CONFIG);
-	SET_GPIO_REG_0(GPIO0_ODR, CFG_GPIO_CONFIG);
-	SET_GPIO_0(CFG_GPIO_CONFIG);
+	SET_GPIO_REG_1(GPIO0_TCR, CONFIG_SYS_GPIO_CONFIG);
+	SET_GPIO_REG_0(GPIO0_ODR, CONFIG_SYS_GPIO_CONFIG);
+	SET_GPIO_0(CONFIG_SYS_GPIO_CONFIG);
 
 	/* input */
-	SET_GPIO_0(CFG_GPIO_CON_DON);
-	SET_GPIO_REG_0(GPIO0_TCR, CFG_GPIO_CON_DON);
-	SET_GPIO_REG_0(GPIO0_ODR, CFG_GPIO_CON_DON);
+	SET_GPIO_0(CONFIG_SYS_GPIO_CON_DON);
+	SET_GPIO_REG_0(GPIO0_TCR, CONFIG_SYS_GPIO_CON_DON);
+	SET_GPIO_REG_0(GPIO0_ODR, CONFIG_SYS_GPIO_CON_DON);
 
 	/* CONFIG = 0 STATUS = 0 -> FPGA in reset state */
-	SET_GPIO_0(CFG_GPIO_CONFIG);
+	SET_GPIO_0(CONFIG_SYS_GPIO_CONFIG);
 	return FPGA_SUCCESS;
 }
 
@@ -131,9 +131,9 @@ int fpga_pre_fn (int cookie)
 int fpga_config_fn (int assert_config, int flush, int cookie)
 {
 	if (assert_config) {
-		SET_GPIO_1(CFG_GPIO_CONFIG);
+		SET_GPIO_1(CONFIG_SYS_GPIO_CONFIG);
 	} else {
-		SET_GPIO_0(CFG_GPIO_CONFIG);
+		SET_GPIO_0(CONFIG_SYS_GPIO_CONFIG);
 	}
 	return FPGA_SUCCESS;
 }
@@ -144,7 +144,7 @@ int fpga_status_fn (int cookie)
 	unsigned long	reg;
 
 	reg = in32(GPIO0_IR);
-	if (reg &= (0x80000000 >> CFG_GPIO_STATUS)) {
+	if (reg &= (0x80000000 >> CONFIG_SYS_GPIO_STATUS)) {
 		PRINTF("STATUS = HIGH\n");
 		return FPGA_FAIL;
 	}
@@ -157,7 +157,7 @@ int fpga_done_fn (int cookie)
 {
 	unsigned long	reg;
 	reg = in32(GPIO0_IR);
-	if (reg &= (0x80000000 >> CFG_GPIO_CON_DON)) {
+	if (reg &= (0x80000000 >> CONFIG_SYS_GPIO_CON_DON)) {
 		PRINTF("CONF_DON = HIGH\n");
 		return FPGA_FAIL;
 	}
@@ -189,10 +189,10 @@ int fpga_write_fn (void *buf, size_t len, int flush, int cookie)
 			i --;
 		} while (i > 0);
 
-#ifdef CFG_FPGA_PROG_FEEDBACK
+#ifdef CONFIG_SYS_FPGA_PROG_FEEDBACK
 		if (bytecount % len_40 == 0) {
 			putc ('.');		/* let them know we are alive */
-#ifdef CFG_FPGA_CHECK_CTRLC
+#ifdef CONFIG_SYS_FPGA_CHECK_CTRLC
 			if (ctrlc ())
 				return FPGA_FAIL;
 #endif
@@ -205,7 +205,7 @@ int fpga_write_fn (void *buf, size_t len, int flush, int cookie)
 /* called, when programming is aborted */
 int fpga_abort_fn (int cookie)
 {
-	SET_GPIO_1((CFG_GPIO_SEL_DPR));
+	SET_GPIO_1((CONFIG_SYS_GPIO_SEL_DPR));
 	return FPGA_SUCCESS;
 }
 
diff --git a/board/prodrive/alpr/init.S b/board/prodrive/alpr/init.S
index 76164ce1d..4af7d13bf 100644
--- a/board/prodrive/alpr/init.S
+++ b/board/prodrive/alpr/init.S
@@ -87,26 +87,26 @@
 tlbtab:
 	tlbtab_start
 	tlbentry( 0xff000000, SZ_16M, 0xff000000, 1, AC_R|AC_W|AC_X|SA_G|SA_I )
-	tlbentry( CFG_PERIPHERAL_BASE, SZ_256M, 0x40000000, 1, AC_R|AC_W|SA_G|SA_I )
-	tlbentry( CFG_ISRAM_BASE, SZ_4K, 0x80000000, 0, AC_R|AC_W|AC_X )
-	tlbentry( CFG_ISRAM_BASE + 0x1000, SZ_4K, 0x80001000, 0, AC_R|AC_W|AC_X )
+	tlbentry( CONFIG_SYS_PERIPHERAL_BASE, SZ_256M, 0x40000000, 1, AC_R|AC_W|SA_G|SA_I )
+	tlbentry( CONFIG_SYS_ISRAM_BASE, SZ_4K, 0x80000000, 0, AC_R|AC_W|AC_X )
+	tlbentry( CONFIG_SYS_ISRAM_BASE + 0x1000, SZ_4K, 0x80001000, 0, AC_R|AC_W|AC_X )
 #ifdef CONFIG_4xx_DCACHE
-	tlbentry( CFG_SDRAM_BASE, SZ_256M, 0x00000000, 0, AC_R|AC_W|AC_X|SA_G)
+	tlbentry( CONFIG_SYS_SDRAM_BASE, SZ_256M, 0x00000000, 0, AC_R|AC_W|AC_X|SA_G)
 #else
-	tlbentry( CFG_SDRAM_BASE, SZ_256M, 0x00000000, 0, AC_R|AC_W|AC_X|SA_G|SA_I )
+	tlbentry( CONFIG_SYS_SDRAM_BASE, SZ_256M, 0x00000000, 0, AC_R|AC_W|AC_X|SA_G|SA_I )
 #endif
 
-#ifdef CFG_INIT_RAM_DCACHE
+#ifdef CONFIG_SYS_INIT_RAM_DCACHE
 	/* TLB-entry for init-ram in dcache (SA_I must be turned off!) */
-	tlbentry( CFG_INIT_RAM_ADDR, SZ_64K, CFG_INIT_RAM_ADDR, 0, AC_R|AC_W|AC_X|SA_G )
+	tlbentry( CONFIG_SYS_INIT_RAM_ADDR, SZ_64K, CONFIG_SYS_INIT_RAM_ADDR, 0, AC_R|AC_W|AC_X|SA_G )
 #endif
-	tlbentry( CFG_PCI_BASE, SZ_256M, 0x00000000, 2, AC_R|AC_W|SA_G|SA_I )
+	tlbentry( CONFIG_SYS_PCI_BASE, SZ_256M, 0x00000000, 2, AC_R|AC_W|SA_G|SA_I )
 
 	/* PCI */
-	tlbentry( CFG_PCI_MEMBASE, SZ_256M, CFG_PCI_MEMBASE, 3, AC_R|AC_W|SA_G|SA_I )
-	tlbentry( CFG_PCI_MEMBASE1, SZ_256M, CFG_PCI_MEMBASE1, 3, AC_R|AC_W|SA_G|SA_I )
-	tlbentry( CFG_PCI_MEMBASE2, SZ_256M, CFG_PCI_MEMBASE2, 3, AC_R|AC_W|SA_G|SA_I )
+	tlbentry( CONFIG_SYS_PCI_MEMBASE, SZ_256M, CONFIG_SYS_PCI_MEMBASE, 3, AC_R|AC_W|SA_G|SA_I )
+	tlbentry( CONFIG_SYS_PCI_MEMBASE1, SZ_256M, CONFIG_SYS_PCI_MEMBASE1, 3, AC_R|AC_W|SA_G|SA_I )
+	tlbentry( CONFIG_SYS_PCI_MEMBASE2, SZ_256M, CONFIG_SYS_PCI_MEMBASE2, 3, AC_R|AC_W|SA_G|SA_I )
 
 	/* NAND */
-	tlbentry( CFG_NAND_BASE, SZ_4K, CFG_NAND_BASE, 1, AC_R|AC_W|AC_X|SA_G|SA_I )
+	tlbentry( CONFIG_SYS_NAND_BASE, SZ_4K, CONFIG_SYS_NAND_BASE, 1, AC_R|AC_W|AC_X|SA_G|SA_I )
 	tlbtab_end
diff --git a/board/prodrive/alpr/nand.c b/board/prodrive/alpr/nand.c
index 99f5737b8..b18c96b29 100644
--- a/board/prodrive/alpr/nand.c
+++ b/board/prodrive/alpr/nand.c
@@ -137,7 +137,7 @@ static int alpr_nand_dev_ready(struct mtd_info *mtd)
 
 int board_nand_init(struct nand_chip *nand)
 {
-	alpr_ndfc = (struct alpr_ndfc_regs *)CFG_NAND_BASE;
+	alpr_ndfc = (struct alpr_ndfc_regs *)CONFIG_SYS_NAND_BASE;
 
 	nand->ecc.mode = NAND_ECC_SOFT;
 
diff --git a/board/prodrive/alpr/u-boot.lds b/board/prodrive/alpr/u-boot.lds
index d114bd61c..33b03af24 100644
--- a/board/prodrive/alpr/u-boot.lds
+++ b/board/prodrive/alpr/u-boot.lds
@@ -137,6 +137,7 @@ SECTIONS
    *(.dynbss)
    *(.bss)
    *(COMMON)
+   . = ALIGN(4);
   }
   _end = . ;
   PROVIDE (end = .);
diff --git a/board/prodrive/common/flash.c b/board/prodrive/common/flash.c
index 363631fd8..c42fa837f 100644
--- a/board/prodrive/common/flash.c
+++ b/board/prodrive/common/flash.c
@@ -24,7 +24,7 @@
 #include <common.h>
 #include <asm/processor.h>
 
-flash_info_t	flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips	*/
+flash_info_t	flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips	*/
 
 /*
  * Functions
@@ -91,7 +91,7 @@ void flash_print_info(flash_info_t *info)
 
 	printf ("  Sector Start Addresses:");
 	for (i=0; i<info->sector_count; ++i) {
-#ifdef CFG_FLASH_EMPTY_INFO
+#ifdef CONFIG_SYS_FLASH_EMPTY_INFO
 		/*
 		 * Check if whole sector is erased
 		 */
@@ -136,31 +136,31 @@ static ulong flash_get_size(vu_long *addr, flash_info_t *info)
 {
 	short i;
 	short n;
-	CFG_FLASH_WORD_SIZE value;
+	CONFIG_SYS_FLASH_WORD_SIZE value;
 	ulong base = (ulong)addr;
-	volatile CFG_FLASH_WORD_SIZE *addr2 = (CFG_FLASH_WORD_SIZE *)addr;
+	volatile CONFIG_SYS_FLASH_WORD_SIZE *addr2 = (CONFIG_SYS_FLASH_WORD_SIZE *)addr;
 
 	/* Write auto select command: read Manufacturer ID */
-	addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE)0x00AA00AA;
-	addr2[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE)0x00550055;
-	addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE)0x00900090;
+	addr2[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE)0x00AA00AA;
+	addr2[CONFIG_SYS_FLASH_ADDR1] = (CONFIG_SYS_FLASH_WORD_SIZE)0x00550055;
+	addr2[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE)0x00900090;
 
-	value = addr2[CFG_FLASH_READ0];
+	value = addr2[CONFIG_SYS_FLASH_READ0];
 
 	switch (value) {
-	case (CFG_FLASH_WORD_SIZE)AMD_MANUFACT:
+	case (CONFIG_SYS_FLASH_WORD_SIZE)AMD_MANUFACT:
 		info->flash_id = FLASH_MAN_AMD;
 		break;
-	case (CFG_FLASH_WORD_SIZE)FUJ_MANUFACT:
+	case (CONFIG_SYS_FLASH_WORD_SIZE)FUJ_MANUFACT:
 		info->flash_id = FLASH_MAN_FUJ;
 		break;
-	case (CFG_FLASH_WORD_SIZE)SST_MANUFACT:
+	case (CONFIG_SYS_FLASH_WORD_SIZE)SST_MANUFACT:
 		info->flash_id = FLASH_MAN_SST;
 		break;
-	case (CFG_FLASH_WORD_SIZE)STM_MANUFACT:
+	case (CONFIG_SYS_FLASH_WORD_SIZE)STM_MANUFACT:
 		info->flash_id = FLASH_MAN_STM;
 		break;
-	case (CFG_FLASH_WORD_SIZE)EXCEL_MANUFACT:
+	case (CONFIG_SYS_FLASH_WORD_SIZE)EXCEL_MANUFACT:
 		info->flash_id = FLASH_MAN_EXCEL;
 		break;
 	default:
@@ -170,82 +170,82 @@ static ulong flash_get_size(vu_long *addr, flash_info_t *info)
 		return (0);			/* no or unknown flash	*/
 	}
 
-	value = addr2[CFG_FLASH_READ1];		/* device ID		*/
+	value = addr2[CONFIG_SYS_FLASH_READ1];		/* device ID		*/
 
 	switch (value) {
-	case (CFG_FLASH_WORD_SIZE)AMD_ID_LV400T:
+	case (CONFIG_SYS_FLASH_WORD_SIZE)AMD_ID_LV400T:
 		info->flash_id += FLASH_AM400T;
 		info->sector_count = 11;
 		info->size = 0x00080000;
 		break;				/* => 0.5 MB		*/
 
-	case (CFG_FLASH_WORD_SIZE)AMD_ID_LV400B:
+	case (CONFIG_SYS_FLASH_WORD_SIZE)AMD_ID_LV400B:
 		info->flash_id += FLASH_AM400B;
 		info->sector_count = 11;
 		info->size = 0x00080000;
 		break;				/* => 0.5 MB		*/
 
-	case (CFG_FLASH_WORD_SIZE)AMD_ID_LV800T:
+	case (CONFIG_SYS_FLASH_WORD_SIZE)AMD_ID_LV800T:
 		info->flash_id += FLASH_AM800T;
 		info->sector_count = 19;
 		info->size = 0x00100000;
 		break;				/* => 1 MB		*/
 
-	case (CFG_FLASH_WORD_SIZE)AMD_ID_LV800B:
+	case (CONFIG_SYS_FLASH_WORD_SIZE)AMD_ID_LV800B:
 		info->flash_id += FLASH_AM800B;
 		info->sector_count = 19;
 		info->size = 0x00100000;
 		break;				/* => 1 MB		*/
 
-	case (CFG_FLASH_WORD_SIZE)AMD_ID_LV160T:
+	case (CONFIG_SYS_FLASH_WORD_SIZE)AMD_ID_LV160T:
 		info->flash_id += FLASH_AM160T;
 		info->sector_count = 35;
 		info->size = 0x00200000;
 		break;				/* => 2 MB		*/
 
-	case (CFG_FLASH_WORD_SIZE)AMD_ID_LV160B:
+	case (CONFIG_SYS_FLASH_WORD_SIZE)AMD_ID_LV160B:
 		info->flash_id += FLASH_AM160B;
 		info->sector_count = 35;
 		info->size = 0x00200000;
 		break;				/* => 2 MB		*/
 
-	case (CFG_FLASH_WORD_SIZE)AMD_ID_LV320T:
+	case (CONFIG_SYS_FLASH_WORD_SIZE)AMD_ID_LV320T:
 		info->flash_id += FLASH_AM320T;
 		info->sector_count = 71;
 		info->size = 0x00400000;  break;	/* => 4 MB	*/
 
-	case (CFG_FLASH_WORD_SIZE)AMD_ID_LV320B:
+	case (CONFIG_SYS_FLASH_WORD_SIZE)AMD_ID_LV320B:
 		info->flash_id += FLASH_AM320B;
 		info->sector_count = 71;
 		info->size = 0x00400000;  break;	/* => 4 MB	*/
 
-	case (CFG_FLASH_WORD_SIZE)AMD_ID_DL322T:
+	case (CONFIG_SYS_FLASH_WORD_SIZE)AMD_ID_DL322T:
 		info->flash_id += FLASH_AMDL322T;
 		info->sector_count = 71;
 		info->size = 0x00400000;  break;	/* => 4 MB	*/
 
-	case (CFG_FLASH_WORD_SIZE)AMD_ID_DL322B:
+	case (CONFIG_SYS_FLASH_WORD_SIZE)AMD_ID_DL322B:
 		info->flash_id += FLASH_AMDL322B;
 		info->sector_count = 71;
 		info->size = 0x00400000;  break;	/* => 4 MB	*/
 
-	case (CFG_FLASH_WORD_SIZE)AMD_ID_DL323T:
+	case (CONFIG_SYS_FLASH_WORD_SIZE)AMD_ID_DL323T:
 		info->flash_id += FLASH_AMDL323T;
 		info->sector_count = 71;
 		info->size = 0x00400000;  break;	/* => 4 MB	*/
 
-	case (CFG_FLASH_WORD_SIZE)AMD_ID_DL323B:
+	case (CONFIG_SYS_FLASH_WORD_SIZE)AMD_ID_DL323B:
 		info->flash_id += FLASH_AMDL323B;
 		info->sector_count = 71;
 		info->size = 0x00400000;  break;	/* => 4 MB	*/
 
-	case (CFG_FLASH_WORD_SIZE)SST_ID_xF020:
+	case (CONFIG_SYS_FLASH_WORD_SIZE)SST_ID_xF020:
 		info->flash_id += FLASH_SST020;
 		info->sector_count = 64;
 		info->size = 0x00040000;
 		break;				/* => 256 kB		*/
 
-	case (CFG_FLASH_WORD_SIZE)SST_ID_xF040:
+	case (CONFIG_SYS_FLASH_WORD_SIZE)SST_ID_xF040:
 		info->flash_id += FLASH_SST040;
 		info->sector_count = 128;
 		info->size = 0x00080000;
@@ -318,19 +318,19 @@ static ulong flash_get_size(vu_long *addr, flash_info_t *info)
 	for (i = 0; i < info->sector_count; i++) {
 		/* read sector protection at sector address, (A7 .. A0) = 0x02 */
 		/* D0 = 1 if protected */
-		addr2 = (volatile CFG_FLASH_WORD_SIZE *)(info->start[i]);
+		addr2 = (volatile CONFIG_SYS_FLASH_WORD_SIZE *)(info->start[i]);
 		if ((info->flash_id & FLASH_VENDMASK) != FLASH_MAN_AMD)
 			info->protect[i] = 0;
 		else
-			info->protect[i] = addr2[CFG_FLASH_READ2] & 1;
+			info->protect[i] = addr2[CONFIG_SYS_FLASH_READ2] & 1;
 	}
 
 	/*
 	 * Prevent writes to uninitialized FLASH.
 	 */
 	if (info->flash_id != FLASH_UNKNOWN) {
-		addr2 = (CFG_FLASH_WORD_SIZE *)info->start[0];
-		*addr2 = (CFG_FLASH_WORD_SIZE)0x00F000F0;	/* reset bank */
+		addr2 = (CONFIG_SYS_FLASH_WORD_SIZE *)info->start[0];
+		*addr2 = (CONFIG_SYS_FLASH_WORD_SIZE)0x00F000F0;	/* reset bank */
 	}
 
 	return (info->size);
@@ -339,8 +339,8 @@ static ulong flash_get_size(vu_long *addr, flash_info_t *info)
 
 int flash_erase(flash_info_t *info, int s_first, int s_last)
 {
-	volatile CFG_FLASH_WORD_SIZE *addr = (CFG_FLASH_WORD_SIZE *)(info->start[0]);
-	volatile CFG_FLASH_WORD_SIZE *addr2;
+	volatile CONFIG_SYS_FLASH_WORD_SIZE *addr = (CONFIG_SYS_FLASH_WORD_SIZE *)(info->start[0]);
+	volatile CONFIG_SYS_FLASH_WORD_SIZE *addr2;
 	int flag, prot, sect, l_sect;
 	ulong start, now, last;
 
@@ -375,14 +375,14 @@ int flash_erase(flash_info_t *info, int s_first, int s_last)
 	/* Start erase on unprotected sectors */
 	for (sect = s_first; sect<=s_last; sect++) {
 		if (info->protect[sect] == 0) {	/* not protected */
-			addr2 = (CFG_FLASH_WORD_SIZE *)(info->start[sect]);
+			addr2 = (CONFIG_SYS_FLASH_WORD_SIZE *)(info->start[sect]);
 			if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) {
-				addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE)0x00AA00AA;
-				addr[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE)0x00550055;
-				addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE)0x00800080;
-				addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE)0x00AA00AA;
-				addr[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE)0x00550055;
-				addr2[0] = (CFG_FLASH_WORD_SIZE)0x00300030;  /* sector erase */
+				addr[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE)0x00AA00AA;
+				addr[CONFIG_SYS_FLASH_ADDR1] = (CONFIG_SYS_FLASH_WORD_SIZE)0x00550055;
+				addr[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE)0x00800080;
+				addr[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE)0x00AA00AA;
+				addr[CONFIG_SYS_FLASH_ADDR1] = (CONFIG_SYS_FLASH_WORD_SIZE)0x00550055;
+				addr2[0] = (CONFIG_SYS_FLASH_WORD_SIZE)0x00300030;  /* sector erase */
 
 				/* re-enable interrupts if necessary */
 				if (flag) {
@@ -392,20 +392,20 @@ int flash_erase(flash_info_t *info, int s_first, int s_last)
 
 				/* data polling for D7 */
 				start = get_timer (0);
-				while ((addr2[0] & (CFG_FLASH_WORD_SIZE)0x00800080) !=
-				       (CFG_FLASH_WORD_SIZE)0x00800080) {
-					if (get_timer(start) > CFG_FLASH_WRITE_TOUT)
+				while ((addr2[0] & (CONFIG_SYS_FLASH_WORD_SIZE)0x00800080) !=
+				       (CONFIG_SYS_FLASH_WORD_SIZE)0x00800080) {
+					if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT)
 						return (1);
 				}
 			} else {
 				if (sect == s_first) {
-					addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE)0x00AA00AA;
-					addr[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE)0x00550055;
-					addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE)0x00800080;
-					addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE)0x00AA00AA;
-					addr[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE)0x00550055;
+					addr[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE)0x00AA00AA;
+					addr[CONFIG_SYS_FLASH_ADDR1] = (CONFIG_SYS_FLASH_WORD_SIZE)0x00550055;
+					addr[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE)0x00800080;
+					addr[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE)0x00AA00AA;
+					addr[CONFIG_SYS_FLASH_ADDR1] = (CONFIG_SYS_FLASH_WORD_SIZE)0x00550055;
 				}
-				addr2[0] = (CFG_FLASH_WORD_SIZE)0x00300030;  /* sector erase */
+				addr2[0] = (CONFIG_SYS_FLASH_WORD_SIZE)0x00300030;  /* sector erase */
 			}
 			l_sect = sect;
 		}
@@ -426,9 +426,9 @@ int flash_erase(flash_info_t *info, int s_first, int s_last)
 
 	start = get_timer (0);
 	last  = start;
-	addr = (CFG_FLASH_WORD_SIZE *)(info->start[l_sect]);
-	while ((addr[0] & (CFG_FLASH_WORD_SIZE)0x00800080) != (CFG_FLASH_WORD_SIZE)0x00800080) {
-		if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+	addr = (CONFIG_SYS_FLASH_WORD_SIZE *)(info->start[l_sect]);
+	while ((addr[0] & (CONFIG_SYS_FLASH_WORD_SIZE)0x00800080) != (CONFIG_SYS_FLASH_WORD_SIZE)0x00800080) {
+		if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
 			printf ("Timeout\n");
 			return 1;
 		}
@@ -441,8 +441,8 @@ int flash_erase(flash_info_t *info, int s_first, int s_last)
 
 DONE:
 	/* reset to read mode */
-	addr = (CFG_FLASH_WORD_SIZE *)info->start[0];
-	addr[0] = (CFG_FLASH_WORD_SIZE)0x00F000F0;	/* reset bank */
+	addr = (CONFIG_SYS_FLASH_WORD_SIZE *)info->start[0];
+	addr[0] = (CONFIG_SYS_FLASH_WORD_SIZE)0x00F000F0;	/* reset bank */
 
 	printf (" done\n");
 	return 0;
@@ -522,9 +522,9 @@ int write_buff(flash_info_t *info, uchar *src, ulong addr, ulong cnt)
  */
 static int write_word(flash_info_t *info, ulong dest, ulong data)
 {
-	volatile CFG_FLASH_WORD_SIZE *addr2 = (CFG_FLASH_WORD_SIZE *)(info->start[0]);
-	volatile CFG_FLASH_WORD_SIZE *dest2 = (CFG_FLASH_WORD_SIZE *)dest;
-	volatile CFG_FLASH_WORD_SIZE *data2 = (CFG_FLASH_WORD_SIZE *)&data;
+	volatile CONFIG_SYS_FLASH_WORD_SIZE *addr2 = (CONFIG_SYS_FLASH_WORD_SIZE *)(info->start[0]);
+	volatile CONFIG_SYS_FLASH_WORD_SIZE *dest2 = (CONFIG_SYS_FLASH_WORD_SIZE *)dest;
+	volatile CONFIG_SYS_FLASH_WORD_SIZE *data2 = (CONFIG_SYS_FLASH_WORD_SIZE *)&data;
 	ulong start;
 	int flag;
 	int i;
@@ -536,10 +536,10 @@ static int write_word(flash_info_t *info, ulong dest, ulong data)
 	/* Disable interrupts which might cause a timeout here */
 	flag = disable_interrupts();
 
-	for (i=0; i<4/sizeof(CFG_FLASH_WORD_SIZE); i++) {
-		addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE)0x00AA00AA;
-		addr2[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE)0x00550055;
-		addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE)0x00A000A0;
+	for (i=0; i<4/sizeof(CONFIG_SYS_FLASH_WORD_SIZE); i++) {
+		addr2[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE)0x00AA00AA;
+		addr2[CONFIG_SYS_FLASH_ADDR1] = (CONFIG_SYS_FLASH_WORD_SIZE)0x00550055;
+		addr2[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE)0x00A000A0;
 
 		dest2[i] = data2[i];
 
@@ -549,9 +549,9 @@ static int write_word(flash_info_t *info, ulong dest, ulong data)
 
 		/* data polling for D7 */
 		start = get_timer (0);
-		while ((dest2[i] & (CFG_FLASH_WORD_SIZE)0x00800080) !=
-		       (data2[i] & (CFG_FLASH_WORD_SIZE)0x00800080)) {
-			if (get_timer(start) > CFG_FLASH_WRITE_TOUT)
+		while ((dest2[i] & (CONFIG_SYS_FLASH_WORD_SIZE)0x00800080) !=
+		       (data2[i] & (CONFIG_SYS_FLASH_WORD_SIZE)0x00800080)) {
+			if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT)
 				return (1);
 		}
 	}
diff --git a/board/prodrive/common/fpga.c b/board/prodrive/common/fpga.c
index f9412a21e..14bff07bf 100644
--- a/board/prodrive/common/fpga.c
+++ b/board/prodrive/common/fpga.c
@@ -37,11 +37,11 @@
 #define DBG(x...)
 #endif /* DEBUG */
 
-#define FPGA_PRG		CFG_FPGA_PRG /* FPGA program pin (cpu output)*/
-#define FPGA_CLK		CFG_FPGA_CLK /* FPGA clk pin (cpu output)    */
-#define FPGA_DATA		CFG_FPGA_DATA /* FPGA data pin (cpu output)  */
-#define FPGA_DONE		CFG_FPGA_DONE /* FPGA done pin (cpu input)   */
-#define FPGA_INIT		CFG_FPGA_INIT /* FPGA init pin (cpu input)   */
+#define FPGA_PRG		CONFIG_SYS_FPGA_PRG /* FPGA program pin (cpu output)*/
+#define FPGA_CLK		CONFIG_SYS_FPGA_CLK /* FPGA clk pin (cpu output)    */
+#define FPGA_DATA		CONFIG_SYS_FPGA_DATA /* FPGA data pin (cpu output)  */
+#define FPGA_DONE		CONFIG_SYS_FPGA_DONE /* FPGA done pin (cpu input)   */
+#define FPGA_INIT		CONFIG_SYS_FPGA_INIT /* FPGA init pin (cpu input)   */
 
 #define ERROR_FPGA_PRG_INIT_LOW  -1        /* Timeout after PRG* asserted   */
 #define ERROR_FPGA_PRG_INIT_HIGH -2        /* Timeout after PRG* deasserted */
diff --git a/board/prodrive/p3mx/misc.S b/board/prodrive/p3mx/misc.S
index 160b1d31f..233fd83bc 100644
--- a/board/prodrive/p3mx/misc.S
+++ b/board/prodrive/p3mx/misc.S
@@ -16,7 +16,7 @@
 board_relocate_rom:
 	mflr	r7
 	/* update the location of the GT registers */
-	lis	r11, CFG_GT_REGS@h
+	lis	r11, CONFIG_SYS_GT_REGS@h
 	/* if we're using ECC, we must use the DMA engine to copy ourselves */
 	bl	start_idma_transfer_0
 	bl	wait_for_idma_0
@@ -29,12 +29,12 @@ board_relocate_rom:
 board_init_ecc:
 	mflr	r7
 	/* NOTE: r10 still contains the location we've been relocated to
-	 * which happens to be TOP_OF_RAM - CFG_MONITOR_LEN */
+	 * which happens to be TOP_OF_RAM - CONFIG_SYS_MONITOR_LEN */
 
 	/* now that we're running from ram, init the rest of main memory
 	 * for ECC use */
-	lis	r8, CFG_MONITOR_LEN@h
-	ori	r8, r8, CFG_MONITOR_LEN@l
+	lis	r8, CONFIG_SYS_MONITOR_LEN@h
+	ori	r8, r8, CONFIG_SYS_MONITOR_LEN@l
 
 	divw	r3, r10, r8
 
@@ -120,15 +120,15 @@ stop_idma_engine_0:
 	blr
 #endif
 
-#ifdef CFG_BOARD_ASM_INIT
+#ifdef CONFIG_SYS_BOARD_ASM_INIT
 	/* NOTE: trashes r3-r7 */
 	.globl board_asm_init
 board_asm_init:
 	/* just move the GT registers to where they belong */
-	lis	r3, CFG_DFL_GT_REGS@h
-	ori	r3, r3, CFG_DFL_GT_REGS@l
-	lis	r4, CFG_GT_REGS@h
-	ori	r4, r4, CFG_GT_REGS@l
+	lis	r3, CONFIG_SYS_DFL_GT_REGS@h
+	ori	r3, r3, CONFIG_SYS_DFL_GT_REGS@l
+	lis	r4, CONFIG_SYS_GT_REGS@h
+	ori	r4, r4, CONFIG_SYS_GT_REGS@l
 	li	r5, INTERNAL_SPACE_DECODE
 
 	/* test to see if we've already moved */
@@ -153,11 +153,11 @@ board_asm_init:
 	cmp	cr0, r7, r6
 	bne	1b
 
-	lis	r3, CFG_INT_SRAM_BASE@h
-	ori	r3, r3, CFG_INT_SRAM_BASE@l
+	lis	r3, CONFIG_SYS_INT_SRAM_BASE@h
+	ori	r3, r3, CONFIG_SYS_INT_SRAM_BASE@l
 	rlwinm  r3, r3, 16, 16, 31
-	lis	r4, CFG_GT_REGS@h
-	ori	r4, r4, CFG_GT_REGS@l
+	lis	r4, CONFIG_SYS_GT_REGS@h
+	ori	r4, r4, CONFIG_SYS_GT_REGS@l
 	li	r5, INTEGRATED_SRAM_BASE_ADDR
 	stwbrx  r3, r5, r4
 
diff --git a/board/prodrive/p3mx/mpsc.c b/board/prodrive/p3mx/mpsc.c
index 2494ec6df..cc05b4503 100644
--- a/board/prodrive/p3mx/mpsc.c
+++ b/board/prodrive/p3mx/mpsc.c
@@ -422,7 +422,7 @@ void mpsc_sdma_init (void)
 			  (MV64460_CUNIT_BASE_ADDR_WIN_0_BIT * 2)));
 
 	/* Setup MPSC internal address space base address	*/
-	GT_REG_WRITE (CUNIT_INTERNAL_SPACE_BASE_ADDR_REG, CFG_GT_REGS);
+	GT_REG_WRITE (CUNIT_INTERNAL_SPACE_BASE_ADDR_REG, CONFIG_SYS_GT_REGS);
 
 	/* no high address remap*/
 	GT_REG_WRITE (CUNIT_HIGH_ADDR_REMAP_REG0, 0x00);
@@ -512,9 +512,9 @@ int galbrg_set_baudrate (int channel, int rate)
 
 #ifdef ZUMA_NTL
 	/* from tclk */
-	clock = (CFG_TCLK / (16 * rate)) - 1;
+	clock = (CONFIG_SYS_TCLK / (16 * rate)) - 1;
 #else
-	clock = (CFG_TCLK / (16 * rate)) - 1;
+	clock = (CONFIG_SYS_TCLK / (16 * rate)) - 1;
 #endif
 
 	galbrg_set_CDV (channel, clock);	/* set timer Reg. for BRG */
diff --git a/board/prodrive/p3mx/p3mx.c b/board/prodrive/p3mx/p3mx.c
index 69d7c9b28..0247bb80a 100644
--- a/board/prodrive/p3mx/p3mx.c
+++ b/board/prodrive/p3mx/p3mx.c
@@ -67,7 +67,7 @@ extern flash_info_t flash_info[];
 /* ------------------------------------------------------------------------- */
 
 /* this is the current GT register space location */
-/* it starts at CFG_DFL_GT_REGS but moves later to CFG_GT_REGS */
+/* it starts at CONFIG_SYS_DFL_GT_REGS but moves later to CONFIG_SYS_GT_REGS */
 
 /* Unfortunately, we cant change it while we are in flash, so we initialize it
  * to the "final" value. This means that any debug_led calls before
@@ -76,7 +76,7 @@ extern flash_info_t flash_info[];
  */
 
 void board_prebootm_init (void);
-unsigned int INTERNAL_REG_BASE_ADDR = CFG_GT_REGS;
+unsigned int INTERNAL_REG_BASE_ADDR = CONFIG_SYS_GT_REGS;
 int display_mem_map (void);
 void set_led(int);
 
@@ -129,7 +129,7 @@ static void gt_pci_config (void)
 
 		GT_REG_WRITE (PCI_0_CONFIG_ADDR, BIT31 | val);
 		GT_REG_WRITE (PCI_0_CONFIG_DATA_VIRTUAL_REG,
-			      (stat & 0xffff0000) | CFG_PCI_IDSEL);
+			      (stat & 0xffff0000) | CONFIG_SYS_PCI_IDSEL);
 
 	}
 	if ((GTREGREAD (PCI_1_MODE) & (BIT4 | BIT5)) != 0) {	/* if  PCI-X */
@@ -138,7 +138,7 @@ static void gt_pci_config (void)
 
 		GT_REG_WRITE (PCI_1_CONFIG_ADDR, BIT31 | val);
 		GT_REG_WRITE (PCI_1_CONFIG_DATA_VIRTUAL_REG,
-			      (stat & 0xffff0000) | CFG_PCI_IDSEL);
+			      (stat & 0xffff0000) | CONFIG_SYS_PCI_IDSEL);
 	}
 
 	/* Enable master */
@@ -157,21 +157,21 @@ static void gt_pci_config (void)
 	 * in 64360 when writing to pci base go and overide remap automaticaly,
 	 * in 64460 it doesn't
 	 */
-	GT_REG_WRITE (PCI_0_IO_BASE_ADDR, CFG_PCI0_IO_SPACE >> 16);
-	GT_REG_WRITE (PCI_0I_O_ADDRESS_REMAP, CFG_PCI0_IO_SPACE_PCI >> 16);
-	GT_REG_WRITE (PCI_0_IO_SIZE, (CFG_PCI0_IO_SIZE - 1) >> 16);
+	GT_REG_WRITE (PCI_0_IO_BASE_ADDR, CONFIG_SYS_PCI0_IO_SPACE >> 16);
+	GT_REG_WRITE (PCI_0I_O_ADDRESS_REMAP, CONFIG_SYS_PCI0_IO_SPACE_PCI >> 16);
+	GT_REG_WRITE (PCI_0_IO_SIZE, (CONFIG_SYS_PCI0_IO_SIZE - 1) >> 16);
 
-	GT_REG_WRITE (PCI_0_MEMORY0_BASE_ADDR, CFG_PCI0_MEM_BASE >> 16);
-	GT_REG_WRITE (PCI_0MEMORY0_ADDRESS_REMAP, CFG_PCI0_MEM_BASE >> 16);
-	GT_REG_WRITE (PCI_0_MEMORY0_SIZE, (CFG_PCI0_MEM_SIZE - 1) >> 16);
+	GT_REG_WRITE (PCI_0_MEMORY0_BASE_ADDR, CONFIG_SYS_PCI0_MEM_BASE >> 16);
+	GT_REG_WRITE (PCI_0MEMORY0_ADDRESS_REMAP, CONFIG_SYS_PCI0_MEM_BASE >> 16);
+	GT_REG_WRITE (PCI_0_MEMORY0_SIZE, (CONFIG_SYS_PCI0_MEM_SIZE - 1) >> 16);
 
-	GT_REG_WRITE (PCI_1_IO_BASE_ADDR, CFG_PCI1_IO_SPACE >> 16);
-	GT_REG_WRITE (PCI_1I_O_ADDRESS_REMAP, CFG_PCI1_IO_SPACE_PCI >> 16);
-	GT_REG_WRITE (PCI_1_IO_SIZE, (CFG_PCI1_IO_SIZE - 1) >> 16);
+	GT_REG_WRITE (PCI_1_IO_BASE_ADDR, CONFIG_SYS_PCI1_IO_SPACE >> 16);
+	GT_REG_WRITE (PCI_1I_O_ADDRESS_REMAP, CONFIG_SYS_PCI1_IO_SPACE_PCI >> 16);
+	GT_REG_WRITE (PCI_1_IO_SIZE, (CONFIG_SYS_PCI1_IO_SIZE - 1) >> 16);
 
-	GT_REG_WRITE (PCI_1_MEMORY0_BASE_ADDR, CFG_PCI1_MEM_BASE >> 16);
-	GT_REG_WRITE (PCI_1MEMORY0_ADDRESS_REMAP, CFG_PCI1_MEM_BASE >> 16);
-	GT_REG_WRITE (PCI_1_MEMORY0_SIZE, (CFG_PCI1_MEM_SIZE - 1) >> 16);
+	GT_REG_WRITE (PCI_1_MEMORY0_BASE_ADDR, CONFIG_SYS_PCI1_MEM_BASE >> 16);
+	GT_REG_WRITE (PCI_1MEMORY0_ADDRESS_REMAP, CONFIG_SYS_PCI1_MEM_BASE >> 16);
+	GT_REG_WRITE (PCI_1_MEMORY0_SIZE, (CONFIG_SYS_PCI1_MEM_SIZE - 1) >> 16);
 
 	/* PCI interface settings */
 	/* Timeout set to retry forever */
@@ -189,7 +189,7 @@ static void gt_pci_config (void)
 	for (stat = 0; stat <= PCI_HOST1; stat++)
 		pciWriteConfigReg (stat,
 				   PCI_INTERNAL_REGISTERS_MEMORY_MAPPED_BASE_ADDRESS,
-				   SELF, CFG_GT_REGS);
+				   SELF, CONFIG_SYS_GT_REGS);
 #endif
 
 }
@@ -204,7 +204,7 @@ static void gt_cpu_config (void)
 	/* cpu configuration register */
 	tmp = GTREGREAD (CPU_CONFIGURATION);
 	/* set the SINGLE_CPU bit  see MV64460 */
-#ifndef CFG_GT_DUAL_CPU		/* SINGLE_CPU seems to cause JTAG problems */
+#ifndef CONFIG_SYS_GT_DUAL_CPU		/* SINGLE_CPU seems to cause JTAG problems */
 	tmp |= CPU_CONF_SINGLE_CPU;
 #endif
 	tmp &= ~CPU_CONF_AACK_DELAY_2;
@@ -246,7 +246,7 @@ int board_early_init_f (void)
 	 * that if it's not at the power-on location, it's where we put
 	 * it last time. (huber)
 	 */
-	my_remap_gt_regs (CFG_DFL_GT_REGS, CFG_GT_REGS);
+	my_remap_gt_regs (CONFIG_SYS_DFL_GT_REGS, CONFIG_SYS_GT_REGS);
 
 #ifdef CONFIG_PCI
 	gt_pci_config ();
@@ -274,17 +274,17 @@ int board_early_init_f (void)
 	memoryMapDeviceSpace(DEVICE3, 0, 0);
 	GT_REG_WRITE(DEVICE_BANK3PARAMETERS, 0);
 
-	GT_REG_WRITE(DEVICE_BOOT_BANK_PARAMETERS, CFG_BOOT_PAR);
+	GT_REG_WRITE(DEVICE_BOOT_BANK_PARAMETERS, CONFIG_SYS_BOOT_PAR);
 
 	gt_cpu_config();
 
 	/* MPP setup */
-	GT_REG_WRITE (MPP_CONTROL0, CFG_MPP_CONTROL_0);
-	GT_REG_WRITE (MPP_CONTROL1, CFG_MPP_CONTROL_1);
-	GT_REG_WRITE (MPP_CONTROL2, CFG_MPP_CONTROL_2);
-	GT_REG_WRITE (MPP_CONTROL3, CFG_MPP_CONTROL_3);
+	GT_REG_WRITE (MPP_CONTROL0, CONFIG_SYS_MPP_CONTROL_0);
+	GT_REG_WRITE (MPP_CONTROL1, CONFIG_SYS_MPP_CONTROL_1);
+	GT_REG_WRITE (MPP_CONTROL2, CONFIG_SYS_MPP_CONTROL_2);
+	GT_REG_WRITE (MPP_CONTROL3, CONFIG_SYS_MPP_CONTROL_3);
 
-	GT_REG_WRITE (GPP_LEVEL_CONTROL, CFG_GPP_LEVEL_CONTROL);
+	GT_REG_WRITE (GPP_LEVEL_CONTROL, CONFIG_SYS_GPP_LEVEL_CONTROL);
 
 	set_led(LED_RED);
 
@@ -298,7 +298,7 @@ int misc_init_r ()
 	u8 val;
 
 	icache_enable ();
-#ifdef CFG_L2
+#ifdef CONFIG_SYS_L2
 	l2cache_enable ();
 #endif
 #ifdef CONFIG_MPSC
@@ -311,7 +311,7 @@ int misc_init_r ()
 	 * No diode, 250 ohm series resistor
 	 */
 	val = 0xa5;
-	i2c_write(CFG_I2C_RTC_ADDR, 8, 1, &val, 1);
+	i2c_write(CONFIG_SYS_I2C_RTC_ADDR, 8, 1, &val, 1);
 
 	return 0;
 }
@@ -328,7 +328,7 @@ int board_early_init_r(void)
 
 void after_reloc (ulong dest_addr, gd_t * gd)
 {
-	memoryMapDeviceSpace (BOOT_DEVICE, CFG_BOOT_SPACE, CFG_BOOT_SIZE);
+	memoryMapDeviceSpace (BOOT_DEVICE, CONFIG_SYS_BOOT_SPACE, CONFIG_SYS_BOOT_SIZE);
 
 /*	display_mem_map(); */
 
@@ -347,7 +347,7 @@ int checkboard (void)
 {
 	char *s = getenv("serial#");
 
-	printf("Board: %s", CFG_BOARD_NAME);
+	printf("Board: %s", CONFIG_SYS_BOARD_NAME);
 
 	if (s != NULL) {
 		puts(", serial# ");
@@ -458,7 +458,7 @@ int display_mem_map (void)
 
 /* DRAM check routines copied from gw8260 */
 
-#if defined (CFG_DRAM_TEST)
+#if defined (CONFIG_SYS_DRAM_TEST)
 
 /*********************************************************************/
 /* NAME:  move64() -  moves a double word (64-bit)		     */
@@ -489,7 +489,7 @@ static void move64 (unsigned long long *src, unsigned long long *dest)
 }
 
 
-#if defined (CFG_DRAM_TEST_DATA)
+#if defined (CONFIG_SYS_DRAM_TEST_DATA)
 
 unsigned long long pattern[] = {
 	0xaaaaaaaaaaaaaaaaULL,
@@ -552,7 +552,7 @@ unsigned long long pattern[] = {
 /*********************************************************************/
 int mem_test_data (void)
 {
-	unsigned long long *pmem = (unsigned long long *) CFG_MEMTEST_START;
+	unsigned long long *pmem = (unsigned long long *) CONFIG_SYS_MEMTEST_START;
 	unsigned long long temp64 = 0;
 	int num_patterns = sizeof (pattern) / sizeof (pattern[0]);
 	int i;
@@ -579,9 +579,9 @@ int mem_test_data (void)
 
 	return 0;
 }
-#endif /* CFG_DRAM_TEST_DATA */
+#endif /* CONFIG_SYS_DRAM_TEST_DATA */
 
-#if defined (CFG_DRAM_TEST_ADDRESS)
+#if defined (CONFIG_SYS_DRAM_TEST_ADDRESS)
 /*********************************************************************/
 /* NAME:  mem_test_address() -	test address lines		     */
 /*								     */
@@ -606,8 +606,8 @@ int mem_test_data (void)
 int mem_test_address (void)
 {
 	volatile unsigned int *pmem =
-		(volatile unsigned int *) CFG_MEMTEST_START;
-	const unsigned int size = (CFG_MEMTEST_END - CFG_MEMTEST_START) / 4;
+		(volatile unsigned int *) CONFIG_SYS_MEMTEST_START;
+	const unsigned int size = (CONFIG_SYS_MEMTEST_END - CONFIG_SYS_MEMTEST_START) / 4;
 	unsigned int i;
 
 	/* write address to each location */
@@ -623,9 +623,9 @@ int mem_test_address (void)
 	}
 	return 0;
 }
-#endif /* CFG_DRAM_TEST_ADDRESS */
+#endif /* CONFIG_SYS_DRAM_TEST_ADDRESS */
 
-#if defined (CFG_DRAM_TEST_WALK)
+#if defined (CONFIG_SYS_DRAM_TEST_WALK)
 /*********************************************************************/
 /* NAME:   mem_march() -  memory march				     */
 /*								     */
@@ -683,7 +683,7 @@ int mem_march (volatile unsigned long long *base,
 	}
 	return 0;
 }
-#endif /* CFG_DRAM_TEST_WALK */
+#endif /* CONFIG_SYS_DRAM_TEST_WALK */
 
 /*********************************************************************/
 /* NAME:   mem_test_walk() -  a simple walking ones test	     */
@@ -715,8 +715,8 @@ int mem_test_walk (void)
 {
 	unsigned long long mask;
 	volatile unsigned long long *pmem =
-		(volatile unsigned long long *) CFG_MEMTEST_START;
-	const unsigned long size = (CFG_MEMTEST_END - CFG_MEMTEST_START) / 8;
+		(volatile unsigned long long *) CONFIG_SYS_MEMTEST_START;
+	const unsigned long size = (CONFIG_SYS_MEMTEST_END - CONFIG_SYS_MEMTEST_START) / 8;
 
 	unsigned int i;
 
@@ -782,15 +782,15 @@ int testdram (void)
 	int runaddress = 0;
 	int runwalk    = 0;
 
-#ifdef CFG_DRAM_TEST_DATA
+#ifdef CONFIG_SYS_DRAM_TEST_DATA
 	s = getenv ("testdramdata");
 	rundata = (s && (*s == 'y')) ? 1 : 0;
 #endif
-#ifdef CFG_DRAM_TEST_ADDRESS
+#ifdef CONFIG_SYS_DRAM_TEST_ADDRESS
 	s = getenv ("testdramaddress");
 	runaddress = (s && (*s == 'y')) ? 1 : 0;
 #endif
-#ifdef CFG_DRAM_TEST_WALK
+#ifdef CONFIG_SYS_DRAM_TEST_WALK
 	s = getenv ("testdramwalk");
 	runwalk = (s && (*s == 'y')) ? 1 : 0;
 #endif
@@ -798,8 +798,8 @@ int testdram (void)
 	if ((rundata == 1) || (runaddress == 1) || (runwalk == 1))
 		printf ("Testing RAM from 0x%08x to 0x%08x ...  "
 			"(don't panic... that will take a moment !!!!)\n",
-			CFG_MEMTEST_START, CFG_MEMTEST_END);
-#ifdef CFG_DRAM_TEST_DATA
+			CONFIG_SYS_MEMTEST_START, CONFIG_SYS_MEMTEST_END);
+#ifdef CONFIG_SYS_DRAM_TEST_DATA
 	if (rundata == 1) {
 		printf ("Test DATA ...  ");
 		if (mem_test_data () == 1) {
@@ -809,7 +809,7 @@ int testdram (void)
 			printf ("ok \n");
 	}
 #endif
-#ifdef CFG_DRAM_TEST_ADDRESS
+#ifdef CONFIG_SYS_DRAM_TEST_ADDRESS
 	if (runaddress == 1) {
 		printf ("Test ADDRESS ...  ");
 		if (mem_test_address () == 1) {
@@ -819,7 +819,7 @@ int testdram (void)
 			printf ("ok \n");
 	}
 #endif
-#ifdef CFG_DRAM_TEST_WALK
+#ifdef CONFIG_SYS_DRAM_TEST_WALK
 	if (runwalk == 1) {
 		printf ("Test WALKING ONEs ...  ");
 		if (mem_test_walk () == 1) {
@@ -834,7 +834,7 @@ int testdram (void)
 	return 0;
 
 }
-#endif /* CFG_DRAM_TEST */
+#endif /* CONFIG_SYS_DRAM_TEST */
 
 /* ronen - the below functions are used by the bootm function           */
 /*  - we map the base register to fbe00000 (same mapping as in the LSP) */
diff --git a/board/prodrive/p3mx/pci.c b/board/prodrive/p3mx/pci.c
index 137739bed..e36b67664 100644
--- a/board/prodrive/p3mx/pci.c
+++ b/board/prodrive/p3mx/pci.c
@@ -66,13 +66,13 @@ static void gt_pci_bus_mode_display (PCI_HOST host)
 		printf ("PCI %d bus mode: Conventional PCI\n", host);
 		break;
 	case 1:
-		printf ("PCI %d bus mode: 66 Mhz PCIX\n", host);
+		printf ("PCI %d bus mode: 66 MHz PCIX\n", host);
 		break;
 	case 2:
-		printf ("PCI %d bus mode: 100 Mhz PCIX\n", host);
+		printf ("PCI %d bus mode: 100 MHz PCIX\n", host);
 		break;
 	case 3:
-		printf ("PCI %d bus mode: 133 Mhz PCIX\n", host);
+		printf ("PCI %d bus mode: 133 MHz PCIX\n", host);
 		break;
 	default:
 		printf ("Unknown BUS %d\n", mode);
@@ -932,14 +932,14 @@ void pci_init_board (void)
 
 	/* PCI memory space */
 	pci_set_region (pci0_hose.regions + 0,
-			CFG_PCI0_0_MEM_SPACE,
-			CFG_PCI0_0_MEM_SPACE,
-			CFG_PCI0_MEM_SIZE, PCI_REGION_MEM);
+			CONFIG_SYS_PCI0_0_MEM_SPACE,
+			CONFIG_SYS_PCI0_0_MEM_SPACE,
+			CONFIG_SYS_PCI0_MEM_SIZE, PCI_REGION_MEM);
 
 	/* PCI I/O space */
 	pci_set_region (pci0_hose.regions + 1,
-			CFG_PCI0_IO_SPACE_PCI,
-			CFG_PCI0_IO_SPACE, CFG_PCI0_IO_SIZE, PCI_REGION_IO);
+			CONFIG_SYS_PCI0_IO_SPACE_PCI,
+			CONFIG_SYS_PCI0_IO_SPACE, CONFIG_SYS_PCI0_IO_SIZE, PCI_REGION_IO);
 
 	pci_set_ops (&pci0_hose,
 		     pci_hose_read_config_byte_via_dword,
@@ -981,14 +981,14 @@ void pci_init_board (void)
 
 	/* PCI memory space */
 	pci_set_region (pci1_hose.regions + 0,
-			CFG_PCI1_0_MEM_SPACE,
-			CFG_PCI1_0_MEM_SPACE,
-			CFG_PCI1_MEM_SIZE, PCI_REGION_MEM);
+			CONFIG_SYS_PCI1_0_MEM_SPACE,
+			CONFIG_SYS_PCI1_0_MEM_SPACE,
+			CONFIG_SYS_PCI1_MEM_SIZE, PCI_REGION_MEM);
 
 	/* PCI I/O space */
 	pci_set_region (pci1_hose.regions + 1,
-			CFG_PCI1_IO_SPACE_PCI,
-			CFG_PCI1_IO_SPACE, CFG_PCI1_IO_SIZE, PCI_REGION_IO);
+			CONFIG_SYS_PCI1_IO_SPACE_PCI,
+			CONFIG_SYS_PCI1_IO_SPACE, CONFIG_SYS_PCI1_IO_SIZE, PCI_REGION_IO);
 
 	pci_set_ops (&pci1_hose,
 		     pci_hose_read_config_byte_via_dword,
diff --git a/board/prodrive/p3mx/sdram_init.c b/board/prodrive/p3mx/sdram_init.c
index d881d3807..bac6c12b9 100644
--- a/board/prodrive/p3mx/sdram_init.c
+++ b/board/prodrive/p3mx/sdram_init.c
@@ -243,9 +243,9 @@ phys_size_t initdram (int board_type)
 	udelay(2);  /* FIXME  make this dynamic for the system clock */
 
 	/* SDRAM init done */
-	memory_map_bank(0, CFG_SDRAM_BASE,  (256 << 20));
-#ifdef CFG_SDRAM1_BASE
-	memory_map_bank(1, CFG_SDRAM1_BASE, (256 << 20));
+	memory_map_bank(0, CONFIG_SYS_SDRAM_BASE,  (256 << 20));
+#ifdef CONFIG_SYS_SDRAM1_BASE
+	memory_map_bank(1, CONFIG_SYS_SDRAM1_BASE, (256 << 20));
 #endif
 
 	/* DUNIT_MMASK: enable SnoopHitEn bit to avoid errata CPU-#4
diff --git a/board/prodrive/p3mx/u-boot.lds b/board/prodrive/p3mx/u-boot.lds
index 1a95755ab..ff2d8b7fe 100644
--- a/board/prodrive/p3mx/u-boot.lds
+++ b/board/prodrive/p3mx/u-boot.lds
@@ -60,7 +60,7 @@ SECTIONS
 
 /* store the environment in a seperate sector in the boot flash */
 /*    . = env_offset; */
-/*    common/environment.o(.text) */
+/*    common/env_embedded.o(.text) */
 
     *(.text)
     *(.fixup)
@@ -131,6 +131,7 @@ SECTIONS
    *(.dynbss)
    *(.bss)
    *(COMMON)
+   . = ALIGN(4);
   }
   _end = . ;
   PROVIDE (end = .);
diff --git a/board/prodrive/p3p440/config.mk b/board/prodrive/p3p440/config.mk
index e5722dd36..60d3bf4d2 100644
--- a/board/prodrive/p3p440/config.mk
+++ b/board/prodrive/p3p440/config.mk
@@ -40,5 +40,5 @@ PLATFORM_CPPFLAGS += -DDEBUG
 endif
 
 ifeq ($(dbcr),1)
-PLATFORM_CPPFLAGS += -DCFG_INIT_DBCR=0x8cff0000
+PLATFORM_CPPFLAGS += -DCONFIG_SYS_INIT_DBCR=0x8cff0000
 endif
diff --git a/board/prodrive/p3p440/init.S b/board/prodrive/p3p440/init.S
index ee6b7066e..8c1a79c4b 100644
--- a/board/prodrive/p3p440/init.S
+++ b/board/prodrive/p3p440/init.S
@@ -90,10 +90,10 @@
 tlbtab:
     tlbtab_start
     tlbentry( 0xf0000000, SZ_256M, 0xf0000000, 1, AC_R|AC_W|AC_X|SA_G|SA_I)
-    tlbentry( CFG_PERIPHERAL_BASE, SZ_256M, 0x40000000, 1, AC_R|AC_W|SA_G|SA_I)
-    tlbentry( CFG_ISRAM_BASE, SZ_4K, 0x80000000, 0, AC_R|AC_W|AC_X )
-    tlbentry( CFG_ISRAM_BASE + 0x1000, SZ_4K, 0x80001000, 0, AC_R|AC_W|AC_X )
-    tlbentry( CFG_SDRAM_BASE, SZ_256M, 0x00000000, 0, AC_R|AC_W|AC_X|SA_G|SA_I )
-    tlbentry( CFG_PCI_BASE, SZ_256M, 0x00000000, 2, AC_R|AC_W|SA_G|SA_I )
-    tlbentry( CFG_PCI_MEMBASE, SZ_256M, 0x00000000, 3, AC_R|AC_W|SA_G|SA_I )
+    tlbentry( CONFIG_SYS_PERIPHERAL_BASE, SZ_256M, 0x40000000, 1, AC_R|AC_W|SA_G|SA_I)
+    tlbentry( CONFIG_SYS_ISRAM_BASE, SZ_4K, 0x80000000, 0, AC_R|AC_W|AC_X )
+    tlbentry( CONFIG_SYS_ISRAM_BASE + 0x1000, SZ_4K, 0x80001000, 0, AC_R|AC_W|AC_X )
+    tlbentry( CONFIG_SYS_SDRAM_BASE, SZ_256M, 0x00000000, 0, AC_R|AC_W|AC_X|SA_G|SA_I )
+    tlbentry( CONFIG_SYS_PCI_BASE, SZ_256M, 0x00000000, 2, AC_R|AC_W|SA_G|SA_I )
+    tlbentry( CONFIG_SYS_PCI_MEMBASE, SZ_256M, 0x00000000, 3, AC_R|AC_W|SA_G|SA_I )
     tlbtab_end
diff --git a/board/prodrive/p3p440/p3p440.c b/board/prodrive/p3p440/p3p440.c
index 1a8aacbdf..1a0486f5c 100644
--- a/board/prodrive/p3p440/p3p440.c
+++ b/board/prodrive/p3p440/p3p440.c
@@ -35,29 +35,29 @@ void set_led(int color)
 {
 	switch (color) {
 	case LED_OFF:
-		out32(GPIO0_OR,  in32(GPIO0_OR) & ~CFG_LED_GREEN & ~CFG_LED_RED);
+		out32(GPIO0_OR,  in32(GPIO0_OR) & ~CONFIG_SYS_LED_GREEN & ~CONFIG_SYS_LED_RED);
 		break;
 
 	case LED_GREEN:
-		out32(GPIO0_OR,  (in32(GPIO0_OR) | CFG_LED_GREEN) & ~CFG_LED_RED);
+		out32(GPIO0_OR,  (in32(GPIO0_OR) | CONFIG_SYS_LED_GREEN) & ~CONFIG_SYS_LED_RED);
 		break;
 
 	case LED_RED:
-		out32(GPIO0_OR,  (in32(GPIO0_OR) | CFG_LED_RED) & ~CFG_LED_GREEN);
+		out32(GPIO0_OR,  (in32(GPIO0_OR) | CONFIG_SYS_LED_RED) & ~CONFIG_SYS_LED_GREEN);
 		break;
 
 	case LED_ORANGE:
-		out32(GPIO0_OR,  in32(GPIO0_OR) | CFG_LED_GREEN | CFG_LED_RED);
+		out32(GPIO0_OR,  in32(GPIO0_OR) | CONFIG_SYS_LED_GREEN | CONFIG_SYS_LED_RED);
 		break;
 	}
 }
 
 static int is_monarch(void)
 {
-	out32(GPIO0_OR,  in32(GPIO0_OR) & ~CFG_GPIO_RDY);
+	out32(GPIO0_OR,  in32(GPIO0_OR) & ~CONFIG_SYS_GPIO_RDY);
 	udelay(1000);
 
-	if (in32(GPIO0_IR) & CFG_MONARCH_IO)
+	if (in32(GPIO0_IR) & CONFIG_SYS_MONARCH_IO)
 		return 0;
 	else
 		return 1;
@@ -68,11 +68,11 @@ static void wait_for_pci_ready(void)
 	/*
 	 * Configure EREADY_IO as input
 	 */
-	out32(GPIO0_TCR, in32(GPIO0_TCR) & ~CFG_EREADY_IO);
+	out32(GPIO0_TCR, in32(GPIO0_TCR) & ~CONFIG_SYS_EREADY_IO);
 	udelay(1000);
 
 	for (;;) {
-		if (in32(GPIO0_IR) & CFG_EREADY_IO)
+		if (in32(GPIO0_IR) & CONFIG_SYS_EREADY_IO)
 			return;
 	}
 
@@ -95,8 +95,8 @@ int board_early_init_f(void)
 	mtdcr(cpc0_gpio, 0x03F01F80);
 
 	out32(GPIO0_ODR, 0x00000000);	/* no open drain pins      */
-	out32(GPIO0_TCR, CFG_GPIO_RDY | CFG_EREADY_IO | CFG_LED_RED | CFG_LED_GREEN);
-	out32(GPIO0_OR,  CFG_GPIO_RDY);
+	out32(GPIO0_TCR, CONFIG_SYS_GPIO_RDY | CONFIG_SYS_EREADY_IO | CONFIG_SYS_LED_RED | CONFIG_SYS_LED_GREEN);
+	out32(GPIO0_OR,  CONFIG_SYS_GPIO_RDY);
 
 	/*--------------------------------------------------------------------
 	 * Setup the interrupt controller polarities, triggers, etc.
@@ -152,7 +152,7 @@ int misc_init_r (void)
 	/*
 	 * Check if only one FLASH bank is available
 	 */
-	if (gd->bd->bi_flashsize != CFG_MAX_FLASH_BANKS * (0 - CFG_FLASH0)) {
+	if (gd->bd->bi_flashsize != CONFIG_SYS_MAX_FLASH_BANKS * (0 - CONFIG_SYS_FLASH0)) {
 		mtebc(pb1cr, 0);			/* disable cs */
 		mtebc(pb1ap, 0);
 		mtebc(pb2cr, 0);			/* disable cs */
@@ -203,7 +203,7 @@ int pci_pre_init(struct pci_controller *hose)
  *	may not be sufficient for a given board.
  *
  ************************************************************************/
-#if defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT)
+#if defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT)
 void pci_target_init(struct pci_controller *hose)
 {
 	/*--------------------------------------------------------------------------+
@@ -218,7 +218,7 @@ void pci_target_init(struct pci_controller *hose)
 	 * Map all of SDRAM to PCI address 0x0000_0000. Note that the 440 strapping
 	 * options to not support sizes such as 128/256 MB.
 	 *--------------------------------------------------------------------------*/
-	out32r(PCIX0_PIM0LAL, CFG_SDRAM_BASE);
+	out32r(PCIX0_PIM0LAL, CONFIG_SYS_SDRAM_BASE);
 	out32r(PCIX0_PIM0LAH, 0);
 	out32r(PCIX0_PIM0SA, ~(gd->ram_size - 1) | 1);
 
@@ -227,12 +227,12 @@ void pci_target_init(struct pci_controller *hose)
 	/*--------------------------------------------------------------------------+
 	 * Program the board's subsystem id/vendor id
 	 *--------------------------------------------------------------------------*/
-	out16r(PCIX0_SBSYSVID, CFG_PCI_SUBSYS_VENDORID);
-	out16r(PCIX0_SBSYSID, CFG_PCI_SUBSYS_DEVICEID);
+	out16r(PCIX0_SBSYSVID, CONFIG_SYS_PCI_SUBSYS_VENDORID);
+	out16r(PCIX0_SBSYSID, CONFIG_SYS_PCI_SUBSYS_DEVICEID);
 
 	out16r(PCIX0_CMD, in16r(PCIX0_CMD) | PCI_COMMAND_MEMORY);
 }
-#endif				/* defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT) */
+#endif				/* defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT) */
 
 /*************************************************************************
  *  is_pci_host
diff --git a/board/prodrive/p3p440/p3p440.h b/board/prodrive/p3p440/p3p440.h
index e4e87d1f5..47e901894 100644
--- a/board/prodrive/p3p440/p3p440.h
+++ b/board/prodrive/p3p440/p3p440.h
@@ -24,11 +24,11 @@
 #ifndef __P3P440_H__
 #define __P3P440_H__
 
-#define CFG_GPIO_RDY	(0x80000000 >> 11)
-#define CFG_MONARCH_IO	(0x80000000 >> 18)
-#define CFG_EREADY_IO	(0x80000000 >> 20)
-#define CFG_LED_GREEN	(0x80000000 >> 21)
-#define CFG_LED_RED	(0x80000000 >> 22)
+#define CONFIG_SYS_GPIO_RDY	(0x80000000 >> 11)
+#define CONFIG_SYS_MONARCH_IO	(0x80000000 >> 18)
+#define CONFIG_SYS_EREADY_IO	(0x80000000 >> 20)
+#define CONFIG_SYS_LED_GREEN	(0x80000000 >> 21)
+#define CONFIG_SYS_LED_RED	(0x80000000 >> 22)
 
 #define LED_OFF		1
 #define LED_GREEN	2
diff --git a/board/prodrive/p3p440/u-boot.lds b/board/prodrive/p3p440/u-boot.lds
index 0e6c878a4..17cfde8f2 100644
--- a/board/prodrive/p3p440/u-boot.lds
+++ b/board/prodrive/p3p440/u-boot.lds
@@ -137,6 +137,7 @@ SECTIONS
    *(.dynbss)
    *(.bss)
    *(COMMON)
+   . = ALIGN(4);
   }
   _end = . ;
   PROVIDE (end = .);
diff --git a/board/prodrive/pdnb3/flash.c b/board/prodrive/pdnb3/flash.c
index 0786324fb..351aed1e1 100644
--- a/board/prodrive/pdnb3/flash.c
+++ b/board/prodrive/pdnb3/flash.c
@@ -52,7 +52,7 @@ unsigned long flash_init(void)
 	int i;
 
 	/* Init: no FLASHes known */
-	for (i=0; i<CFG_MAX_FLASH_BANKS; i++)
+	for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; i++)
 		flash_info[i].flash_id = FLASH_UNKNOWN;
 
 	size = flash_get_size((vu_long *)FLASH_BASE0_PRELIM, &flash_info[0]);
@@ -66,20 +66,20 @@ unsigned long flash_init(void)
 
 	/* Monitor protection ON by default */
 	flash_protect(FLAG_PROTECT_SET,
-		      CFG_MONITOR_BASE, CFG_MONITOR_BASE + monitor_flash_len - 1,
-		      &flash_info[CFG_MAX_FLASH_BANKS - 1]);
+		      CONFIG_SYS_MONITOR_BASE, CONFIG_SYS_MONITOR_BASE + monitor_flash_len - 1,
+		      &flash_info[CONFIG_SYS_MAX_FLASH_BANKS - 1]);
 
 	/* Environment protection ON by default */
 	flash_protect(FLAG_PROTECT_SET,
-		      CFG_ENV_ADDR,
-		      CFG_ENV_ADDR + CFG_ENV_SECT_SIZE - 1,
-		      &flash_info[CFG_MAX_FLASH_BANKS - 1]);
+		      CONFIG_ENV_ADDR,
+		      CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE - 1,
+		      &flash_info[CONFIG_SYS_MAX_FLASH_BANKS - 1]);
 
 	/* Redundant environment protection ON by default */
 	flash_protect(FLAG_PROTECT_SET,
-		      CFG_ENV_ADDR_REDUND,
-		      CFG_ENV_ADDR_REDUND + CFG_ENV_SIZE_REDUND - 1,
-		      &flash_info[CFG_MAX_FLASH_BANKS - 1]);
+		      CONFIG_ENV_ADDR_REDUND,
+		      CONFIG_ENV_ADDR_REDUND + CONFIG_ENV_SIZE_REDUND - 1,
+		      &flash_info[CONFIG_SYS_MAX_FLASH_BANKS - 1]);
 
 	flash_info[0].size = size;
 
diff --git a/board/prodrive/pdnb3/nand.c b/board/prodrive/pdnb3/nand.c
index 1ce3c8c61..2efe027ec 100644
--- a/board/prodrive/pdnb3/nand.c
+++ b/board/prodrive/pdnb3/nand.c
@@ -136,7 +136,7 @@ static int pdnb3_nand_dev_ready(struct mtd_info *mtd)
 
 int board_nand_init(struct nand_chip *nand)
 {
-	pdnb3_ndfc = (struct pdnb3_ndfc_regs *)CFG_NAND_BASE;
+	pdnb3_ndfc = (struct pdnb3_ndfc_regs *)CONFIG_SYS_NAND_BASE;
 
 	nand->ecc.mode = NAND_ECC_SOFT;
 
diff --git a/board/prodrive/pdnb3/pdnb3.c b/board/prodrive/pdnb3/pdnb3.c
index 3445a3abf..3773ba181 100644
--- a/board/prodrive/pdnb3/pdnb3.c
+++ b/board/prodrive/pdnb3/pdnb3.c
@@ -34,8 +34,8 @@ int do_reset(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
 
 /* predefine these here for FPGA programming (before including fpga.c) */
 #define SET_FPGA(data)	*IXP425_GPIO_GPOUTR = (data)
-#define FPGA_DONE_STATE (*IXP425_GPIO_GPINR & CFG_FPGA_DONE)
-#define FPGA_INIT_STATE (*IXP425_GPIO_GPINR & CFG_FPGA_INIT)
+#define FPGA_DONE_STATE (*IXP425_GPIO_GPINR & CONFIG_SYS_FPGA_DONE)
+#define FPGA_INIT_STATE (*IXP425_GPIO_GPINR & CONFIG_SYS_FPGA_INIT)
 #define OLD_VAL		old_val
 
 static unsigned long old_val = 0;
@@ -56,46 +56,46 @@ int board_init(void)
 	/* adress of boot parameters */
 	gd->bd->bi_boot_params = 0x00000100;
 
-	GPIO_OUTPUT_SET(CFG_GPIO_FPGA_RESET);
-	GPIO_OUTPUT_ENABLE(CFG_GPIO_FPGA_RESET);
+	GPIO_OUTPUT_SET(CONFIG_SYS_GPIO_FPGA_RESET);
+	GPIO_OUTPUT_ENABLE(CONFIG_SYS_GPIO_FPGA_RESET);
 
-	GPIO_OUTPUT_SET(CFG_GPIO_SYS_RUNNING);
-	GPIO_OUTPUT_ENABLE(CFG_GPIO_SYS_RUNNING);
+	GPIO_OUTPUT_SET(CONFIG_SYS_GPIO_SYS_RUNNING);
+	GPIO_OUTPUT_ENABLE(CONFIG_SYS_GPIO_SYS_RUNNING);
 
 	/*
 	 * Setup GPIO's for FPGA programming
 	 */
-	GPIO_OUTPUT_CLEAR(CFG_GPIO_PRG);
-	GPIO_OUTPUT_CLEAR(CFG_GPIO_CLK);
-	GPIO_OUTPUT_CLEAR(CFG_GPIO_DATA);
-	GPIO_OUTPUT_ENABLE(CFG_GPIO_PRG);
-	GPIO_OUTPUT_ENABLE(CFG_GPIO_CLK);
-	GPIO_OUTPUT_ENABLE(CFG_GPIO_DATA);
-	GPIO_OUTPUT_DISABLE(CFG_GPIO_INIT);
-	GPIO_OUTPUT_DISABLE(CFG_GPIO_DONE);
+	GPIO_OUTPUT_CLEAR(CONFIG_SYS_GPIO_PRG);
+	GPIO_OUTPUT_CLEAR(CONFIG_SYS_GPIO_CLK);
+	GPIO_OUTPUT_CLEAR(CONFIG_SYS_GPIO_DATA);
+	GPIO_OUTPUT_ENABLE(CONFIG_SYS_GPIO_PRG);
+	GPIO_OUTPUT_ENABLE(CONFIG_SYS_GPIO_CLK);
+	GPIO_OUTPUT_ENABLE(CONFIG_SYS_GPIO_DATA);
+	GPIO_OUTPUT_DISABLE(CONFIG_SYS_GPIO_INIT);
+	GPIO_OUTPUT_DISABLE(CONFIG_SYS_GPIO_DONE);
 
 	/*
 	 * Setup GPIO's for interrupts
 	 */
-	GPIO_OUTPUT_DISABLE(CFG_GPIO_PCI_INTA);
-	GPIO_INT_ACT_LOW_SET(CFG_GPIO_PCI_INTA);
-	GPIO_OUTPUT_DISABLE(CFG_GPIO_PCI_INTB);
-	GPIO_INT_ACT_LOW_SET(CFG_GPIO_PCI_INTB);
-	GPIO_OUTPUT_DISABLE(CFG_GPIO_RESTORE_INT);
-	GPIO_INT_ACT_LOW_SET(CFG_GPIO_RESTORE_INT);
-	GPIO_OUTPUT_DISABLE(CFG_GPIO_RESTART_INT);
-	GPIO_INT_ACT_LOW_SET(CFG_GPIO_RESTART_INT);
+	GPIO_OUTPUT_DISABLE(CONFIG_SYS_GPIO_PCI_INTA);
+	GPIO_INT_ACT_LOW_SET(CONFIG_SYS_GPIO_PCI_INTA);
+	GPIO_OUTPUT_DISABLE(CONFIG_SYS_GPIO_PCI_INTB);
+	GPIO_INT_ACT_LOW_SET(CONFIG_SYS_GPIO_PCI_INTB);
+	GPIO_OUTPUT_DISABLE(CONFIG_SYS_GPIO_RESTORE_INT);
+	GPIO_INT_ACT_LOW_SET(CONFIG_SYS_GPIO_RESTORE_INT);
+	GPIO_OUTPUT_DISABLE(CONFIG_SYS_GPIO_RESTART_INT);
+	GPIO_INT_ACT_LOW_SET(CONFIG_SYS_GPIO_RESTART_INT);
 
 	/*
 	 * Setup GPIO's for 33MHz clock output
 	 */
 	*IXP425_GPIO_GPCLKR = 0x01FF0000;
-	GPIO_OUTPUT_ENABLE(CFG_GPIO_CLK_33M);
+	GPIO_OUTPUT_ENABLE(CONFIG_SYS_GPIO_CLK_33M);
 
 	/*
 	 * Setup other chip select's
 	 */
-	*IXP425_EXP_CS1 = CFG_EXP_CS1;
+	*IXP425_EXP_CS1 = CONFIG_SYS_EXP_CS1;
 
 	return 0;
 }
@@ -132,14 +132,14 @@ int do_fpga_boot(unsigned char *fpgadata)
 	int status;
 	int index;
 	int i;
-	ulong len = CFG_MALLOC_LEN;
+	ulong len = CONFIG_SYS_MALLOC_LEN;
 
 	/*
 	 * Setup GPIO's for FPGA programming
 	 */
-	GPIO_OUTPUT_CLEAR(CFG_GPIO_PRG);
-	GPIO_OUTPUT_CLEAR(CFG_GPIO_CLK);
-	GPIO_OUTPUT_CLEAR(CFG_GPIO_DATA);
+	GPIO_OUTPUT_CLEAR(CONFIG_SYS_GPIO_PRG);
+	GPIO_OUTPUT_CLEAR(CONFIG_SYS_GPIO_CLK);
+	GPIO_OUTPUT_CLEAR(CONFIG_SYS_GPIO_DATA);
 
 	/*
 	 * Save value so no readback is required upon programming
@@ -149,8 +149,8 @@ int do_fpga_boot(unsigned char *fpgadata)
 	/*
 	 * First try to decompress fpga image (gzip compressed?)
 	 */
-	dst = malloc(CFG_FPGA_MAX_SIZE);
-	if (gunzip(dst, CFG_FPGA_MAX_SIZE, (uchar *)fpgadata, &len) != 0) {
+	dst = malloc(CONFIG_SYS_FPGA_MAX_SIZE);
+	if (gunzip(dst, CONFIG_SYS_FPGA_MAX_SIZE, (uchar *)fpgadata, &len) != 0) {
 		printf("Error: Image has to be gzipp'ed!\n");
 		return -1;
 	}
@@ -204,9 +204,9 @@ int do_fpga_boot(unsigned char *fpgadata)
 	/*
 	 * Reset FPGA
 	 */
-	GPIO_OUTPUT_CLEAR(CFG_GPIO_FPGA_RESET);
+	GPIO_OUTPUT_CLEAR(CONFIG_SYS_GPIO_FPGA_RESET);
 	udelay(10);
-	GPIO_OUTPUT_SET(CFG_GPIO_FPGA_RESET);
+	GPIO_OUTPUT_SET(CONFIG_SYS_GPIO_FPGA_RESET);
 
 	return (0);
 }
diff --git a/board/prodrive/pdnb3/u-boot.lds b/board/prodrive/pdnb3/u-boot.lds
index 638edbeee..dc59119e8 100644
--- a/board/prodrive/pdnb3/u-boot.lds
+++ b/board/prodrive/pdnb3/u-boot.lds
@@ -51,6 +51,6 @@ SECTIONS
 
 	. = ALIGN(4);
 	__bss_start = .;
-	.bss (NOLOAD) : { *(.bss) }
+	.bss (NOLOAD) : { *(.bss) . = ALIGN(4); }
 	_end = .;
 }
diff --git a/board/psyent/common/AMDLV065D.c b/board/psyent/common/AMDLV065D.c
index 8a7b14ee2..0fcf354cd 100644
--- a/board/psyent/common/AMDLV065D.c
+++ b/board/psyent/common/AMDLV065D.c
@@ -30,7 +30,7 @@
 #endif
 
 #define SECTSZ		(64 * 1024)
-flash_info_t flash_info[CFG_MAX_FLASH_BANKS];
+flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];
 
 /*----------------------------------------------------------------------*/
 unsigned long flash_init (void)
@@ -39,18 +39,18 @@ unsigned long flash_init (void)
 	unsigned long addr;
 	flash_info_t *fli = &flash_info[0];
 
-	fli->size = CFG_FLASH_SIZE;
-	fli->sector_count = CFG_MAX_FLASH_SECT;
+	fli->size = CONFIG_SYS_FLASH_SIZE;
+	fli->sector_count = CONFIG_SYS_MAX_FLASH_SECT;
 	fli->flash_id = FLASH_MAN_AMD + FLASH_AMDLV065D;
 
-	addr = CFG_FLASH_BASE;
+	addr = CONFIG_SYS_FLASH_BASE;
 	for (i = 0; i < fli->sector_count; ++i) {
 		fli->start[i] = addr;
 		addr += SECTSZ;
 		fli->protect[i] = 1;
 	}
 
-	return (CFG_FLASH_SIZE);
+	return (CONFIG_SYS_FLASH_SIZE);
 }
 /*--------------------------------------------------------------------*/
 void flash_print_info (flash_info_t * info)
@@ -135,7 +135,7 @@ int flash_erase (flash_info_t * info, int s_first, int s_last)
 			while ( readb (addr2) != 0xff) {
 				udelay (1000 * 1000);
 				putc ('.');
-				if (get_timer (start) > CFG_FLASH_ERASE_TOUT) {
+				if (get_timer (start) > CONFIG_SYS_FLASH_ERASE_TOUT) {
 					printf ("timeout\n");
 					return 1;
 				}
@@ -177,7 +177,7 @@ int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
 		/* Verify write */
 		start = get_timer (0);
 		while (readb (dst) != b) {
-			if (get_timer (start) > CFG_FLASH_WRITE_TOUT) {
+			if (get_timer (start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
 				return 1;
 			}
 		}
diff --git a/board/psyent/pk1c20/led.c b/board/psyent/pk1c20/led.c
index c75fe8c57..e5e770576 100644
--- a/board/psyent/pk1c20/led.c
+++ b/board/psyent/pk1c20/led.c
@@ -33,7 +33,7 @@ static led_id_t val = 0;
 
 void __led_init (led_id_t mask, int state)
 {
-	nios_pio_t *pio = (nios_pio_t *)CFG_LEDPIO_ADDR;
+	nios_pio_t *pio = (nios_pio_t *)CONFIG_SYS_LEDPIO_ADDR;
 
 	if (state == STATUS_LED_ON)
 		val &= ~mask;
@@ -44,7 +44,7 @@ void __led_init (led_id_t mask, int state)
 
 void __led_set (led_id_t mask, int state)
 {
-	nios_pio_t *pio = (nios_pio_t *)CFG_LEDPIO_ADDR;
+	nios_pio_t *pio = (nios_pio_t *)CONFIG_SYS_LEDPIO_ADDR;
 
 	if (state == STATUS_LED_ON)
 		val &= ~mask;
@@ -55,7 +55,7 @@ void __led_set (led_id_t mask, int state)
 
 void __led_toggle (led_id_t mask)
 {
-	nios_pio_t *pio = (nios_pio_t *)CFG_LEDPIO_ADDR;
+	nios_pio_t *pio = (nios_pio_t *)CONFIG_SYS_LEDPIO_ADDR;
 
 	val ^= mask;
 	writel (&pio->data, val);
diff --git a/board/purple/flash.c b/board/purple/flash.c
index 1baae35eb..37c7becba 100644
--- a/board/purple/flash.c
+++ b/board/purple/flash.c
@@ -24,7 +24,7 @@
 #include <common.h>
 #include <asm/inca-ip.h>
 
-flash_info_t	flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips	*/
+flash_info_t	flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips	*/
 
 typedef unsigned long FLASH_PORT_WIDTH;
 typedef volatile unsigned long FLASH_PORT_WIDTHV;
@@ -207,7 +207,7 @@ unsigned long flash_init (void)
 	load_cmd(IN_RAM_CMD_READ);
 
 	/* Init: no FLASHes known */
-	for (i=0; i < CFG_MAX_FLASH_BANKS; ++i) {
+	for (i=0; i < CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
 		ulong flashbase = PHYS_FLASH_1;
 		ulong * buscon = (ulong *) INCA_IP_EBU_EBU_BUSCON0;
 
@@ -229,20 +229,20 @@ unsigned long flash_init (void)
 		size += flash_info[i].size;
 	}
 
-#if CFG_MONITOR_BASE >= CFG_FLASH_BASE
+#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE
 	/* monitor protection ON by default */
 	flash_protect(FLAG_PROTECT_SET,
-		      CFG_MONITOR_BASE,
-		      CFG_MONITOR_BASE+monitor_flash_len-1,
-		      flash_get_info(CFG_MONITOR_BASE));
+		      CONFIG_SYS_MONITOR_BASE,
+		      CONFIG_SYS_MONITOR_BASE+monitor_flash_len-1,
+		      flash_get_info(CONFIG_SYS_MONITOR_BASE));
 #endif
 
-#ifdef	CFG_ENV_IS_IN_FLASH
+#ifdef	CONFIG_ENV_IS_IN_FLASH
 	/* ENV protection ON by default */
 	flash_protect(FLAG_PROTECT_SET,
-		      CFG_ENV_ADDR,
-		      CFG_ENV_ADDR+CFG_ENV_SIZE-1,
-		      flash_get_info(CFG_ENV_ADDR));
+		      CONFIG_ENV_ADDR,
+		      CONFIG_ENV_ADDR+CONFIG_ENV_SIZE-1,
+		      flash_get_info(CONFIG_ENV_ADDR));
 #endif
 
 	return size;
@@ -282,13 +282,13 @@ static flash_info_t *flash_get_info(ulong base)
 	int i;
 	flash_info_t * info;
 
-	for (i = 0; i < CFG_MAX_FLASH_BANKS; i ++) {
+	for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i ++) {
 		info = & flash_info[i];
 		if (info->start[0] <= base && base < info->start[0] + info->size)
 			break;
 	}
 
-	return i == CFG_MAX_FLASH_BANKS ? 0 : info;
+	return i == CONFIG_SYS_MAX_FLASH_BANKS ? 0 : info;
 }
 
 /*-----------------------------------------------------------------------
@@ -507,10 +507,10 @@ int	flash_erase (flash_info_t *info, int s_first, int s_last)
 
 		start = get_timer(0);
 
-		while ((now = get_timer(start)) <= CFG_FLASH_ERASE_TOUT) {
+		while ((now = get_timer(start)) <= CONFIG_SYS_FLASH_ERASE_TOUT) {
 
 			/* show that we're waiting */
-			if ((get_timer(last)) > CFG_HZ) {/* every second */
+			if ((get_timer(last)) > CONFIG_SYS_HZ) {/* every second */
 				putc ('.');
 				last = get_timer(0);
 			}
diff --git a/board/purple/purple.c b/board/purple/purple.c
index 977559112..54bef651c 100644
--- a/board/purple/purple.c
+++ b/board/purple/purple.c
@@ -23,6 +23,7 @@
 
 #include <common.h>
 #include <command.h>
+#include <netdev.h>
 #include <asm/inca-ip.h>
 #include <asm/regdef.h>
 #include <asm/mipsregs.h>
@@ -128,14 +129,14 @@ phys_size_t initdram(int board_type)
 {
 	/* The only supported number of SDRAM banks is 4.
 	 */
-#define CFG_NB	4
+#define CONFIG_SYS_NB	4
 
 	ulong	cfgpb0	= *INCA_IP_SDRAM_MC_CFGPB0;
 	ulong	cfgdw	= *INCA_IP_SDRAM_MC_CFGDW;
 	int	cols	= cfgpb0 & 0xF;
 	int	rows	= (cfgpb0 & 0xF0) >> 4;
 	int	dw	= cfgdw & 0xF;
-	ulong	size	= (1 << (rows + cols)) * (1 << (dw - 1)) * CFG_NB;
+	ulong	size	= (1 << (rows + cols)) * (1 << (dw - 1)) * CONFIG_SYS_NB;
 	void (*  sdram_init) (ulong);
 
 	sdram_init = (void (*)(ulong)) CKSEG0ADDR(&sdram_timing_init);
@@ -252,25 +253,32 @@ void copy_code (ulong dest_addr)
 
 	/* copy u-boot code
 	 */
-	copyLongs((ulong *)CFG_MONITOR_BASE,
+	copyLongs((ulong *)CONFIG_SYS_MONITOR_BASE,
 		  (ulong *)dest_addr,
-		  ((ulong)&uboot_end_data - CFG_MONITOR_BASE + 3) / 4);
+		  ((ulong)&uboot_end_data - CONFIG_SYS_MONITOR_BASE + 3) / 4);
 
 
 	/* flush caches
 	 */
 
 	start = CKSEG0;
-	end = start + CFG_DCACHE_SIZE;
+	end = start + CONFIG_SYS_DCACHE_SIZE;
 	while(start < end) {
 		cache_unroll(start,Index_Writeback_Inv_D);
-		start += CFG_CACHELINE_SIZE;
+		start += CONFIG_SYS_CACHELINE_SIZE;
 	}
 
 	start = CKSEG0;
-	end = start + CFG_ICACHE_SIZE;
+	end = start + CONFIG_SYS_ICACHE_SIZE;
 	while(start < end) {
 		cache_unroll(start,Index_Invalidate_I);
-		start += CFG_CACHELINE_SIZE;
+		start += CONFIG_SYS_CACHELINE_SIZE;
 	}
 }
+
+#ifdef CONFIG_PLB2800_ETHER
+int board_eth_init(bd_t *bis)
+{
+	return plb2800_eth_initialize(bis);
+}
+#endif
diff --git a/board/purple/sconsole.c b/board/purple/sconsole.c
index f52d50d0a..cd9d871b5 100644
--- a/board/purple/sconsole.c
+++ b/board/purple/sconsole.c
@@ -38,7 +38,7 @@ int serial_init (void)
 
 	sb->pos  = 0;
 	sb->size = 0;
-	sb->max_size = CFG_SCONSOLE_SIZE - sizeof (sconsole_buffer_t);
+	sb->max_size = CONFIG_SYS_SCONSOLE_SIZE - sizeof (sconsole_buffer_t);
 
 	return (0);
 }
diff --git a/board/purple/sconsole.h b/board/purple/sconsole.h
index e130ad4c1..baed5fbb8 100644
--- a/board/purple/sconsole.h
+++ b/board/purple/sconsole.h
@@ -33,7 +33,7 @@ typedef struct sconsole_buffer_s {
 	char data[1];
 } sconsole_buffer_t;
 
-#define SCONSOLE_BUFFER		((sconsole_buffer_t *) CFG_SCONSOLE_ADDR)
+#define SCONSOLE_BUFFER		((sconsole_buffer_t *) CONFIG_SYS_SCONSOLE_ADDR)
 
 extern void	(* sconsole_putc)	(char);
 extern void	(* sconsole_puts)	(const char *);
diff --git a/board/purple/u-boot.lds b/board/purple/u-boot.lds
index 972e6e720..bf1394b2a 100644
--- a/board/purple/u-boot.lds
+++ b/board/purple/u-boot.lds
@@ -42,7 +42,7 @@ SECTIONS
 	  common/cmd_boot.o		(.text)
 	  lib_generic/zlib.o		(.text)
 	  . = DEFINED(env_offset) ? env_offset : .;
-	  common/environment.o	(.ppcenv)
+	  common/env_embedded.o	(.ppcenv)
 
 	  *(.text)
 	}
@@ -75,6 +75,6 @@ SECTIONS
 
 	. = ALIGN(4);
 	.sbss (NOLOAD)  : { *(.sbss) }
-	.bss (NOLOAD)  : { *(.bss) }
+	.bss (NOLOAD)  : { *(.bss) . = ALIGN(4); }
 	uboot_end = .;
 }
diff --git a/board/pxa255_idp/lowlevel_init.S b/board/pxa255_idp/lowlevel_init.S
index 80b5182cf..a50760fea 100644
--- a/board/pxa255_idp/lowlevel_init.S
+++ b/board/pxa255_idp/lowlevel_init.S
@@ -29,7 +29,7 @@
 #include <version.h>
 #include <asm/arch/pxa-regs.h>
 
-DRAM_SIZE:  .long   CFG_DRAM_SIZE
+DRAM_SIZE:  .long   CONFIG_SYS_DRAM_SIZE
 
 /* wait for coprocessor write complete */
 	.macro CPWAIT reg
@@ -53,67 +53,67 @@ lowlevel_init:
 
 	/* Set up GPIO pins first ----------------------------------------- */
 	ldr		r0,	=GPSR0
-	ldr		r1,	=CFG_GPSR0_VAL
+	ldr		r1,	=CONFIG_SYS_GPSR0_VAL
 	str		r1,   [r0]
 
 	ldr		r0,	=GPSR1
-	ldr		r1,	=CFG_GPSR1_VAL
+	ldr		r1,	=CONFIG_SYS_GPSR1_VAL
 	str		r1,   [r0]
 
 	ldr		r0,	=GPSR2
-	ldr		r1,	=CFG_GPSR2_VAL
+	ldr		r1,	=CONFIG_SYS_GPSR2_VAL
 	str		r1,   [r0]
 
 	ldr		r0,	=GPCR0
-	ldr		r1,	=CFG_GPCR0_VAL
+	ldr		r1,	=CONFIG_SYS_GPCR0_VAL
 	str		r1,   [r0]
 
 	ldr		r0,	=GPCR1
-	ldr		r1,	=CFG_GPCR1_VAL
+	ldr		r1,	=CONFIG_SYS_GPCR1_VAL
 	str		r1,   [r0]
 
 	ldr		r0,	=GPCR2
-	ldr		r1,	=CFG_GPCR2_VAL
+	ldr		r1,	=CONFIG_SYS_GPCR2_VAL
 	str		r1,   [r0]
 
 	ldr		r0,	=GPDR0
-	ldr		r1,	=CFG_GPDR0_VAL
+	ldr		r1,	=CONFIG_SYS_GPDR0_VAL
 	str		r1,   [r0]
 
 	ldr		r0,	=GPDR1
-	ldr		r1,	=CFG_GPDR1_VAL
+	ldr		r1,	=CONFIG_SYS_GPDR1_VAL
 	str		r1,   [r0]
 
 	ldr		r0,	=GPDR2
-	ldr		r1,	=CFG_GPDR2_VAL
+	ldr		r1,	=CONFIG_SYS_GPDR2_VAL
 	str		r1,   [r0]
 
 	ldr		r0,	=GAFR0_L
-	ldr		r1,	=CFG_GAFR0_L_VAL
+	ldr		r1,	=CONFIG_SYS_GAFR0_L_VAL
 	str		r1,   [r0]
 
 	ldr		r0,	=GAFR0_U
-	ldr		r1,	=CFG_GAFR0_U_VAL
+	ldr		r1,	=CONFIG_SYS_GAFR0_U_VAL
 	str		r1,   [r0]
 
 	ldr		r0,	=GAFR1_L
-	ldr		r1,	=CFG_GAFR1_L_VAL
+	ldr		r1,	=CONFIG_SYS_GAFR1_L_VAL
 	str		r1,   [r0]
 
 	ldr		r0,	=GAFR1_U
-	ldr		r1,	=CFG_GAFR1_U_VAL
+	ldr		r1,	=CONFIG_SYS_GAFR1_U_VAL
 	str		r1,   [r0]
 
 	ldr		r0,	=GAFR2_L
-	ldr		r1,	=CFG_GAFR2_L_VAL
+	ldr		r1,	=CONFIG_SYS_GAFR2_L_VAL
 	str		r1,   [r0]
 
 	ldr		r0,	=GAFR2_U
-	ldr		r1,	=CFG_GAFR2_U_VAL
+	ldr		r1,	=CONFIG_SYS_GAFR2_U_VAL
 	str		r1,   [r0]
 
 	ldr	r0,	=PSSR		/* enable GPIO pins */
-	ldr		r1,	=CFG_PSSR_VAL
+	ldr		r1,	=CONFIG_SYS_PSSR_VAL
 	str		r1,   [r0]
 
 #ifdef DEBUG_BLINK_ENABLE
@@ -156,17 +156,17 @@ mem_init:
 	/* MSC registers: timing, bus width, mem type                       */
 
 	/* MSC0: nCS(0,1)                                                   */
-	ldr     r2,   =CFG_MSC0_VAL
+	ldr     r2,   =CONFIG_SYS_MSC0_VAL
 	str     r2,   [r1, #MSC0_OFFSET]
 	ldr     r2,   [r1, #MSC0_OFFSET]	/* read back to ensure      */
 						/* that data latches        */
 	/* MSC1: nCS(2,3)                                                   */
-	ldr     r2,  =CFG_MSC1_VAL
+	ldr     r2,  =CONFIG_SYS_MSC1_VAL
 	str     r2,  [r1, #MSC1_OFFSET]
 	ldr     r2,  [r1, #MSC1_OFFSET]
 
 	/* MSC2: nCS(4,5)                                                   */
-	ldr     r2,  =CFG_MSC2_VAL
+	ldr     r2,  =CONFIG_SYS_MSC2_VAL
 	str     r2,  [r1, #MSC2_OFFSET]
 	ldr     r2,  [r1, #MSC2_OFFSET]
 
@@ -175,37 +175,37 @@ mem_init:
 	/* ---------------------------------------------------------------- */
 
 	/* MECR: Memory Expansion Card Register                             */
-	ldr     r2,  =CFG_MECR_VAL
+	ldr     r2,  =CONFIG_SYS_MECR_VAL
 	str     r2,  [r1, #MECR_OFFSET]
 	ldr	r2,	[r1, #MECR_OFFSET]
 
 	/* MCMEM0: Card Interface slot 0 timing                             */
-	ldr     r2,  =CFG_MCMEM0_VAL
+	ldr     r2,  =CONFIG_SYS_MCMEM0_VAL
 	str     r2,  [r1, #MCMEM0_OFFSET]
 	ldr	r2,	[r1, #MCMEM0_OFFSET]
 
 	/* MCMEM1: Card Interface slot 1 timing                             */
-	ldr     r2,  =CFG_MCMEM1_VAL
+	ldr     r2,  =CONFIG_SYS_MCMEM1_VAL
 	str     r2,  [r1, #MCMEM1_OFFSET]
 	ldr	r2,	[r1, #MCMEM1_OFFSET]
 
 	/* MCATT0: Card Interface Attribute Space Timing, slot 0            */
-	ldr     r2,  =CFG_MCATT0_VAL
+	ldr     r2,  =CONFIG_SYS_MCATT0_VAL
 	str     r2,  [r1, #MCATT0_OFFSET]
 	ldr	r2,	[r1, #MCATT0_OFFSET]
 
 	/* MCATT1: Card Interface Attribute Space Timing, slot 1            */
-	ldr     r2,  =CFG_MCATT1_VAL
+	ldr     r2,  =CONFIG_SYS_MCATT1_VAL
 	str     r2,  [r1, #MCATT1_OFFSET]
 	ldr	r2,	[r1, #MCATT1_OFFSET]
 
 	/* MCIO0: Card Interface I/O Space Timing, slot 0                   */
-	ldr     r2,  =CFG_MCIO0_VAL
+	ldr     r2,  =CONFIG_SYS_MCIO0_VAL
 	str     r2,  [r1, #MCIO0_OFFSET]
 	ldr	r2,	[r1, #MCIO0_OFFSET]
 
 	/* MCIO1: Card Interface I/O Space Timing, slot 1                   */
-	ldr     r2,  =CFG_MCIO1_VAL
+	ldr     r2,  =CONFIG_SYS_MCIO1_VAL
 	str     r2,  [r1, #MCIO1_OFFSET]
 	ldr	r2,	[r1, #MCIO1_OFFSET]
 
@@ -225,7 +225,7 @@ mem_init:
 	/* Before accessing MDREFR we need a valid DRI field, so we set     */
 	/* this to power on defaults + DRI field.                           */
 
-	ldr     r3,     =CFG_MDREFR_VAL
+	ldr     r3,     =CONFIG_SYS_MDREFR_VAL
 	ldr     r2,     =0xFFF
 	and     r3,     r3,  r2
 	ldr	r4,	=0x03ca4000
@@ -253,7 +253,7 @@ mem_init:
 
 	/* set MDREFR according to user define with exception of a few bits */
 
-	ldr     r4,     =CFG_MDREFR_VAL
+	ldr     r4,     =CONFIG_SYS_MDREFR_VAL
 	orr	r4,	r4,	#(MDREFR_SLFRSH)
 	bic	r4,	r4,	#(MDREFR_E1PIN|MDREFR_E0PIN)
 	str     r4,     [r1, #MDREFR_OFFSET]    /* write back MDREFR        */
@@ -267,7 +267,7 @@ mem_init:
 
 	/* Step 4c: assert MDREFR:E1PIN and E0PIO as desired                */
 
-	ldr     r4,     =CFG_MDREFR_VAL
+	ldr     r4,     =CONFIG_SYS_MDREFR_VAL
 	str     r4,     [r1, #MDREFR_OFFSET]    /* write back MDREFR        */
 	ldr     r4,     [r1, #MDREFR_OFFSET]
 
@@ -275,7 +275,7 @@ mem_init:
 	/* Step 4d: write MDCNFG with MDCNFG:DEx deasserted (set to 0), to  */
 	/*          configure but not enable each SDRAM partition pair.     */
 
-	ldr	r4,	=CFG_MDCNFG_VAL
+	ldr	r4,	=CONFIG_SYS_MDCNFG_VAL
 	bic	r4,	r4,	#(MDCNFG_DE0|MDCNFG_DE1)
 
 	str     r4,     [r1, #MDCNFG_OFFSET]	/* write back MDCNFG        */
@@ -300,7 +300,7 @@ mem_init:
 	/*          documented in SDRAM data sheets. The address(es) used   */
 	/*          for this purpose must not be cacheable.                 */
 
-	ldr	r3,	=CFG_DRAM_BASE
+	ldr	r3,	=CONFIG_SYS_DRAM_BASE
 	str	r2,	[r3]
 	str	r2,	[r3]
 	str	r2,	[r3]
@@ -319,7 +319,7 @@ mem_init:
 
 	/* Step 4h: Write MDMRS.                                            */
 
-	ldr     r2,  =CFG_MDMRS_VAL
+	ldr     r2,  =CONFIG_SYS_MDMRS_VAL
 	str     r2,  [r1, #MDMRS_OFFSET]
 
 	/* We are finished with Intel's memory controller initialisation    */
diff --git a/board/pxa255_idp/pxa_idp.c b/board/pxa255_idp/pxa_idp.c
index 5765c5532..b0aa8dda8 100644
--- a/board/pxa255_idp/pxa_idp.c
+++ b/board/pxa255_idp/pxa_idp.c
@@ -127,7 +127,7 @@ int do_idpcmd(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 	return 0;
 }
 
-U_BOOT_CMD(idpcmd, CFG_MAXARGS, 0, do_idpcmd,
+U_BOOT_CMD(idpcmd, CONFIG_SYS_MAXARGS, 0, do_idpcmd,
 	   "idpcmd    - custom IDP command\n",
 	   "no args at this time\n"
 );
diff --git a/board/pxa255_idp/pxa_reg_calcs.out b/board/pxa255_idp/pxa_reg_calcs.out
index bda9946c1..39295fb67 100644
--- a/board/pxa255_idp/pxa_reg_calcs.out
+++ b/board/pxa255_idp/pxa_reg_calcs.out
@@ -15,21 +15,21 @@ gpsr1: 0x3f0002
 gpsr2: 0x1c000
 
 
-#define CFG_GAFR0_L_VAL	0x80001005
-#define CFG_GAFR0_U_VAL	0xa5128012
-#define CFG_GAFR1_L_VAL	0x699a9558
-#define CFG_GAFR1_U_VAL	0xaaa5aa6a
-#define CFG_GAFR2_L_VAL	0xaaaaaaaa
-#define CFG_GAFR2_U_VAL	0x2
-#define CFG_GPCR0_VAL	0x1800400
-#define CFG_GPCR1_VAL	0x0
-#define CFG_GPCR2_VAL	0x0
-#define CFG_GPDR0_VAL	0xc1818440
-#define CFG_GPDR1_VAL	0xfcffab82
-#define CFG_GPDR2_VAL	0x1ffff
-#define CFG_GPSR0_VAL	0x8000
-#define CFG_GPSR1_VAL	0x3f0002
-#define CFG_GPSR2_VAL	0x1c000
+#define CONFIG_SYS_GAFR0_L_VAL	0x80001005
+#define CONFIG_SYS_GAFR0_U_VAL	0xa5128012
+#define CONFIG_SYS_GAFR1_L_VAL	0x699a9558
+#define CONFIG_SYS_GAFR1_U_VAL	0xaaa5aa6a
+#define CONFIG_SYS_GAFR2_L_VAL	0xaaaaaaaa
+#define CONFIG_SYS_GAFR2_U_VAL	0x2
+#define CONFIG_SYS_GPCR0_VAL	0x1800400
+#define CONFIG_SYS_GPCR1_VAL	0x0
+#define CONFIG_SYS_GPCR2_VAL	0x0
+#define CONFIG_SYS_GPDR0_VAL	0xc1818440
+#define CONFIG_SYS_GPDR1_VAL	0xfcffab82
+#define CONFIG_SYS_GPDR2_VAL	0x1ffff
+#define CONFIG_SYS_GPSR0_VAL	0x8000
+#define CONFIG_SYS_GPSR1_VAL	0x3f0002
+#define CONFIG_SYS_GPSR2_VAL	0x1c000
 
 
 GPIO: 0, dir=0, set=0, clr=0, alt=none, desc=USER_RESET#
diff --git a/board/pxa255_idp/pxa_reg_calcs.py b/board/pxa255_idp/pxa_reg_calcs.py
index c4bcb4b0a..2f89e3162 100644
--- a/board/pxa255_idp/pxa_reg_calcs.py
+++ b/board/pxa255_idp/pxa_reg_calcs.py
@@ -246,12 +246,12 @@ pxa_regs = {
 
 # U-boot define names
 uboot_reg_names = {
-	'gpdr0':'CFG_GPDR0_VAL', 'gpdr1':'CFG_GPDR1_VAL', 'gpdr2':'CFG_GPDR2_VAL',
-	'gpsr0':'CFG_GPSR0_VAL', 'gpsr1':'CFG_GPSR1_VAL', 'gpsr2':'CFG_GPSR2_VAL',
-	'gpcr0':'CFG_GPCR0_VAL', 'gpcr1':'CFG_GPCR1_VAL', 'gpcr2':'CFG_GPCR2_VAL',
-	'gafr0_l':'CFG_GAFR0_L_VAL', 'gafr0_u':'CFG_GAFR0_U_VAL',
-	'gafr1_l':'CFG_GAFR1_L_VAL', 'gafr1_u':'CFG_GAFR1_U_VAL',
-	'gafr2_l':'CFG_GAFR2_L_VAL', 'gafr2_u':'CFG_GAFR2_U_VAL',
+	'gpdr0':'CONFIG_SYS_GPDR0_VAL', 'gpdr1':'CONFIG_SYS_GPDR1_VAL', 'gpdr2':'CONFIG_SYS_GPDR2_VAL',
+	'gpsr0':'CONFIG_SYS_GPSR0_VAL', 'gpsr1':'CONFIG_SYS_GPSR1_VAL', 'gpsr2':'CONFIG_SYS_GPSR2_VAL',
+	'gpcr0':'CONFIG_SYS_GPCR0_VAL', 'gpcr1':'CONFIG_SYS_GPCR1_VAL', 'gpcr2':'CONFIG_SYS_GPCR2_VAL',
+	'gafr0_l':'CONFIG_SYS_GAFR0_L_VAL', 'gafr0_u':'CONFIG_SYS_GAFR0_U_VAL',
+	'gafr1_l':'CONFIG_SYS_GAFR1_L_VAL', 'gafr1_u':'CONFIG_SYS_GAFR1_U_VAL',
+	'gafr2_l':'CONFIG_SYS_GAFR2_L_VAL', 'gafr2_u':'CONFIG_SYS_GAFR2_U_VAL',
 }
 
 # bit mappings
diff --git a/board/pxa255_idp/u-boot.lds b/board/pxa255_idp/u-boot.lds
index 381b6b746..96ac25c7c 100644
--- a/board/pxa255_idp/u-boot.lds
+++ b/board/pxa255_idp/u-boot.lds
@@ -51,6 +51,6 @@ SECTIONS
 
 	. = ALIGN(4);
 	__bss_start = .;
-	.bss (NOLOAD) : { *(.bss) }
+	.bss (NOLOAD) : { *(.bss) . = ALIGN(4); }
 	_end = .;
 }
diff --git a/board/qemu-mips/u-boot.lds b/board/qemu-mips/u-boot.lds
index c2a85661e..03bcb093f 100644
--- a/board/qemu-mips/u-boot.lds
+++ b/board/qemu-mips/u-boot.lds
@@ -67,6 +67,6 @@ SECTIONS
 
 	. = ALIGN(4);
 	.sbss  : { *(.sbss) }
-	.bss  : { *(.bss) }
+	.bss  : { *(.bss) . = ALIGN(4); }
 	uboot_end = .;
 }
diff --git a/board/quad100hd/nand.c b/board/quad100hd/nand.c
index 766ee95bb..35525bc3b 100644
--- a/board/quad100hd/nand.c
+++ b/board/quad100hd/nand.c
@@ -37,9 +37,9 @@ static void quad100hd_hwcontrol(struct mtd_info *mtd,
 	struct nand_chip *this = mtd->priv;
 
 	if (ctrl & NAND_CTRL_CHANGE) {
-		gpio_write_bit(CFG_NAND_CLE, !!(ctrl & NAND_CLE));
-		gpio_write_bit(CFG_NAND_ALE, !!(ctrl & NAND_ALE));
-		gpio_write_bit(CFG_NAND_CE, !(ctrl & NAND_NCE));
+		gpio_write_bit(CONFIG_SYS_NAND_CLE, !!(ctrl & NAND_CLE));
+		gpio_write_bit(CONFIG_SYS_NAND_ALE, !!(ctrl & NAND_ALE));
+		gpio_write_bit(CONFIG_SYS_NAND_CE, !(ctrl & NAND_NCE));
 	}
 
 	if (cmd != NAND_CMD_NONE)
@@ -48,7 +48,7 @@ static void quad100hd_hwcontrol(struct mtd_info *mtd,
 
 static int quad100hd_nand_ready(struct mtd_info *mtd)
 {
-	return gpio_read_in_bit(CFG_NAND_RDY);
+	return gpio_read_in_bit(CONFIG_SYS_NAND_RDY);
 }
 
 /*
diff --git a/board/quad100hd/quad100hd.c b/board/quad100hd/quad100hd.c
index 81186782b..ffc47de25 100644
--- a/board/quad100hd/quad100hd.c
+++ b/board/quad100hd/quad100hd.c
@@ -86,8 +86,3 @@ int checkboard(void)
 
 	return 0;
 }
-
-phys_size_t initdram(int board_type)
-{
-	return CFG_SDRAM_SIZE;
-}
diff --git a/board/quad100hd/u-boot.lds b/board/quad100hd/u-boot.lds
index 195d91b71..7cf4d4f30 100644
--- a/board/quad100hd/u-boot.lds
+++ b/board/quad100hd/u-boot.lds
@@ -127,6 +127,7 @@ SECTIONS
    *(.dynbss)
    *(.bss)
    *(COMMON)
+   . = ALIGN(4);
   }
   _end = . ;
   PROVIDE (end = .);
diff --git a/board/quantum/fpga.c b/board/quantum/fpga.c
index 75c2658e8..092aaab6b 100644
--- a/board/quantum/fpga.c
+++ b/board/quantum/fpga.c
@@ -62,11 +62,11 @@
 
 int fpga_boot (unsigned char *fpgadata, int size)
 {
-	volatile immap_t *immr = (immap_t *) CFG_IMMR;
+	volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
 	int i, index, len;
 	int count;
 
-#ifdef CFG_FPGA_SPARTAN2
+#ifdef CONFIG_SYS_FPGA_SPARTAN2
 	int j;
 	unsigned char data;
 #else
@@ -89,7 +89,7 @@ int fpga_boot (unsigned char *fpgadata, int size)
 
 	index = 0;
 
-#ifdef CFG_FPGA_SPARTAN2
+#ifdef CONFIG_SYS_FPGA_SPARTAN2
 	/* search for preamble 0xFFFFFFFF */
 	while (1) {
 		if ((fpgadata[index] == 0xff) && (fpgadata[index + 1] == 0xff)
@@ -159,12 +159,12 @@ int fpga_boot (unsigned char *fpgadata, int size)
 	debug ("write configuration data into fpga\n");
 	/* write configuration-data into fpga... */
 
-#ifdef CFG_FPGA_SPARTAN2
+#ifdef CONFIG_SYS_FPGA_SPARTAN2
 	/*
 	 * Load uncompressed image into fpga
 	 */
 	for (i = index; i < size; i++) {
-#ifdef CFG_FPGA_PROG_FEEDBACK
+#ifdef CONFIG_SYS_FPGA_PROG_FEEDBACK
 		if ((i % 1024) == 0)
 			printf ("%6d out of %6d\r", i, size);	/* let them know we are alive */
 #endif
diff --git a/board/quantum/quantum.c b/board/quantum/quantum.c
index 345f127b6..d94b5d72a 100644
--- a/board/quantum/quantum.c
+++ b/board/quantum/quantum.c
@@ -104,7 +104,7 @@ int checkboard (void)
 
 phys_size_t initdram (int board_type)
 {
-	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
 	volatile memctl8xx_t *memctl = &immap->im_memctl;
 	long int size9;
 
@@ -112,15 +112,15 @@ phys_size_t initdram (int board_type)
 		   sizeof (sdram_table) / sizeof (uint));
 
 	/* Refresh clock prescalar */
-	memctl->memc_mptpr = CFG_MPTPR;
+	memctl->memc_mptpr = CONFIG_SYS_MPTPR;
 
 	memctl->memc_mar = 0x00000088;
 
 	/* Map controller banks 1 to the SDRAM bank */
-	memctl->memc_or1 = CFG_OR1_PRELIM;
-	memctl->memc_br1 = CFG_BR1_PRELIM;
+	memctl->memc_or1 = CONFIG_SYS_OR1_PRELIM;
+	memctl->memc_br1 = CONFIG_SYS_BR1_PRELIM;
 
-	memctl->memc_mamr = CFG_MAMR_9COL & (~(MAMR_PTAE));	/* no refresh yet */
+	memctl->memc_mamr = CONFIG_SYS_MAMR_9COL & (~(MAMR_PTAE));	/* no refresh yet */
 
 	udelay (200);
 
@@ -136,12 +136,12 @@ phys_size_t initdram (int board_type)
 	/* Check Bank 0 Memory Size,
 	 * 9 column mode
 	 */
-	size9 = dram_size (CFG_MAMR_9COL, (long *) SDRAM_BASE_PRELIM,
+	size9 = dram_size (CONFIG_SYS_MAMR_9COL, (long *) SDRAM_BASE_PRELIM,
 			   SDRAM_MAX_SIZE);
 	/*
 	 * Final mapping:
 	 */
-	memctl->memc_or1 = ((-size9) & 0xFFFF0000) | CFG_OR_TIMING_SDRAM;
+	memctl->memc_or1 = ((-size9) & 0xFFFF0000) | CONFIG_SYS_OR_TIMING_SDRAM;
 	udelay (1000);
 
 	return (size9);
@@ -160,7 +160,7 @@ phys_size_t initdram (int board_type)
 static long int dram_size (long int mamr_value, long int *base,
 			   long int maxsize)
 {
-	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
 	volatile memctl8xx_t *memctl = &immap->im_memctl;
 	volatile ulong *addr;
 	ulong cnt, val, size;
@@ -224,14 +224,14 @@ int misc_init_r (void)
 	void *fpga_data;
 	int fpga_size;
 	int status;
-	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
 	volatile memctl8xx_t *memctl = &immap->im_memctl;
 	int flash_size;
 
 	/* Remap FLASH according to real size */
 	flash_size = flash_init ();
-	memctl->memc_or0 = CFG_OR_TIMING_FLASH | (-flash_size & 0xFFFF8000);
-	memctl->memc_br0 = (CFG_FLASH_BASE & BR_BA_MSK) | BR_MS_GPCM | BR_V;
+	memctl->memc_or0 = CONFIG_SYS_OR_TIMING_FLASH | (-flash_size & 0xFFFF8000);
+	memctl->memc_br0 = (CONFIG_SYS_FLASH_BASE & BR_BA_MSK) | BR_MS_GPCM | BR_V;
 
 	if (fpga_data_str && fpga_size_str) {
 		fpga_data = (void *) simple_strtoul (fpga_data_str, NULL, 16);
diff --git a/board/quantum/u-boot.lds b/board/quantum/u-boot.lds
index 1f9a191d4..55cb5eca3 100644
--- a/board/quantum/u-boot.lds
+++ b/board/quantum/u-boot.lds
@@ -64,7 +64,7 @@ SECTIONS
 /* XXX ?
     . = env_offset;
 */
-    common/environment.o(.text)
+    common/env_embedded.o(.text)
 
     *(.text)
     *(.fixup)
@@ -135,6 +135,7 @@ SECTIONS
    *(.dynbss)
    *(.bss)
    *(COMMON)
+   . = ALIGN(4);
   }
   _end = . ;
   PROVIDE (end = .);
diff --git a/board/quantum/u-boot.lds.debug b/board/quantum/u-boot.lds.debug
index 0cd053a8b..016048dae 100644
--- a/board/quantum/u-boot.lds.debug
+++ b/board/quantum/u-boot.lds.debug
@@ -61,7 +61,7 @@ SECTIONS
     lib_generic/crc32.o		(.text)
 
     . = env_offset;
-    common/environment.o(.text)
+    common/env_embedded.o(.text)
 
     *(.text)
     *(.fixup)
diff --git a/board/r360mpi/flash.c b/board/r360mpi/flash.c
index 9b42960c7..45cccf712 100644
--- a/board/r360mpi/flash.c
+++ b/board/r360mpi/flash.c
@@ -29,17 +29,17 @@
 #include <common.h>
 #include <mpc8xx.h>
 
-flash_info_t flash_info[CFG_MAX_FLASH_BANKS];	/* info for FLASH chips    */
+flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];	/* info for FLASH chips    */
 
-#if defined(CFG_ENV_IS_IN_FLASH)
-# ifndef  CFG_ENV_ADDR
-#  define CFG_ENV_ADDR	(CFG_FLASH_BASE + CFG_ENV_OFFSET)
+#if defined(CONFIG_ENV_IS_IN_FLASH)
+# ifndef  CONFIG_ENV_ADDR
+#  define CONFIG_ENV_ADDR	(CONFIG_SYS_FLASH_BASE + CONFIG_ENV_OFFSET)
 # endif
-# ifndef  CFG_ENV_SIZE
-#  define CFG_ENV_SIZE	CFG_ENV_SECT_SIZE
+# ifndef  CONFIG_ENV_SIZE
+#  define CONFIG_ENV_SIZE	CONFIG_ENV_SECT_SIZE
 # endif
-# ifndef  CFG_ENV_SECT_SIZE
-#  define CFG_ENV_SECT_SIZE  CFG_ENV_SIZE
+# ifndef  CONFIG_ENV_SECT_SIZE
+#  define CONFIG_ENV_SECT_SIZE  CONFIG_ENV_SIZE
 # endif
 #endif
 
@@ -76,13 +76,13 @@ static void flash_get_offsets (ulong base, flash_info_t * info);
 
 unsigned long flash_init (void)
 {
-	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
 	volatile memctl8xx_t *memctl = &immap->im_memctl;
 	unsigned long size_b0;
 	int i;
 
 	/* Init: no FLASHes known */
-	for (i = 0; i < CFG_MAX_FLASH_BANKS; ++i) {
+	for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
 		flash_info[i].flash_id = FLASH_UNKNOWN;
 	}
 
@@ -95,27 +95,27 @@ unsigned long flash_init (void)
 	}
 
 	/* Remap FLASH according to real size */
-	memctl->memc_or0 = CFG_OR_TIMING_FLASH | (-size_b0 & 0xFFFF8000);
-	memctl->memc_br0 = (CFG_FLASH_BASE & BR_BA_MSK) | BR_PS_16 | BR_MS_GPCM | BR_V;
+	memctl->memc_or0 = CONFIG_SYS_OR_TIMING_FLASH | (-size_b0 & 0xFFFF8000);
+	memctl->memc_br0 = (CONFIG_SYS_FLASH_BASE & BR_BA_MSK) | BR_PS_16 | BR_MS_GPCM | BR_V;
 
 	/* Re-do sizing to get full correct info */
-	size_b0 = flash_get_size ((FPW *) CFG_FLASH_BASE, &flash_info[0]);
+	size_b0 = flash_get_size ((FPW *) CONFIG_SYS_FLASH_BASE, &flash_info[0]);
 
-	flash_get_offsets (CFG_FLASH_BASE, &flash_info[0]);
+	flash_get_offsets (CONFIG_SYS_FLASH_BASE, &flash_info[0]);
 
-#if CFG_MONITOR_BASE >= CFG_FLASH_BASE
+#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE
 	/* monitor protection ON by default */
 	(void) flash_protect (FLAG_PROTECT_SET,
-				CFG_FLASH_BASE,
-				CFG_FLASH_BASE + monitor_flash_len - 1,
+				CONFIG_SYS_FLASH_BASE,
+				CONFIG_SYS_FLASH_BASE + monitor_flash_len - 1,
 				&flash_info[0]);
 #endif
 
-#ifdef	CFG_ENV_IS_IN_FLASH
+#ifdef	CONFIG_ENV_IS_IN_FLASH
 	/* ENV protection ON by default */
 	flash_protect (FLAG_PROTECT_SET,
-			CFG_ENV_ADDR,
-			CFG_ENV_ADDR + CFG_ENV_SIZE - 1,
+			CONFIG_ENV_ADDR,
+			CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1,
 			&flash_info[0]);
 #endif
 
@@ -261,10 +261,10 @@ static ulong flash_get_size (FPW * addr, flash_info_t * info)
 		break;
 	}
 
-	if (info->sector_count > CFG_MAX_FLASH_SECT) {
+	if (info->sector_count > CONFIG_SYS_MAX_FLASH_SECT) {
 		printf ("** ERROR: sector count %d > max (%d) **\n",
-				info->sector_count, CFG_MAX_FLASH_SECT);
-		info->sector_count = CFG_MAX_FLASH_SECT;
+				info->sector_count, CONFIG_SYS_MAX_FLASH_SECT);
+		info->sector_count = CONFIG_SYS_MAX_FLASH_SECT;
 	}
 
 	addr[0] = (FPW) 0x00FF00FF;	/* restore read mode */
@@ -335,7 +335,7 @@ int flash_erase (flash_info_t * info, int s_first, int s_last)
 			udelay (1000);
 
 			while (((status = *addr) & (FPW) 0x00800080) != (FPW) 0x00800080) {
-			    if ((now = get_timer (start)) > CFG_FLASH_ERASE_TOUT) {
+			    if ((now = get_timer (start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
 				printf ("Timeout\n");
 				*addr = (FPW) 0x00B000B0;	/* suspend erase     */
 				*addr = (FPW) 0x00FF00FF;	/* reset to read mode */
@@ -472,7 +472,7 @@ static int write_data (flash_info_t * info, ulong dest, FPW data)
 	start = get_timer (0);
 
 	while (((status = *addr) & (FPW) 0x00800080) != (FPW) 0x00800080) {
-		if (get_timer (start) > CFG_FLASH_WRITE_TOUT) {
+		if (get_timer (start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
 			*addr = (FPW) 0x00FF00FF;	/* restore read mode */
 			return (1);
 		}
diff --git a/board/r360mpi/pcmcia.c b/board/r360mpi/pcmcia.c
index 4fd9d1298..85da41bd2 100644
--- a/board/r360mpi/pcmcia.c
+++ b/board/r360mpi/pcmcia.c
@@ -28,10 +28,10 @@ int pcmcia_hardware_enable(int slot)
 
 	udelay(10000);
 
-	immap = (immap_t *)CFG_IMMR;
-	sysp  = (sysconf8xx_t *)(&(((immap_t *)CFG_IMMR)->im_siu_conf));
-	pcmp  = (pcmconf8xx_t *)(&(((immap_t *)CFG_IMMR)->im_pcmcia));
-	cp    = (cpm8xx_t *)(&(((immap_t *)CFG_IMMR)->im_cpm));
+	immap = (immap_t *)CONFIG_SYS_IMMR;
+	sysp  = (sysconf8xx_t *)(&(((immap_t *)CONFIG_SYS_IMMR)->im_siu_conf));
+	pcmp  = (pcmconf8xx_t *)(&(((immap_t *)CONFIG_SYS_IMMR)->im_pcmcia));
+	cp    = (cpm8xx_t *)(&(((immap_t *)CONFIG_SYS_IMMR)->im_cpm));
 
 	/*
 	* Configure SIUMCR to enable PCMCIA port B
@@ -132,8 +132,8 @@ int pcmcia_hardware_disable(int slot)
 
 	debug ("hardware_disable: " PCMCIA_BOARD_MSG " Slot %c\n", 'A'+slot);
 
-	immap = (immap_t *)CFG_IMMR;
-	pcmp = (pcmconf8xx_t *)(&(((immap_t *)CFG_IMMR)->im_pcmcia));
+	immap = (immap_t *)CONFIG_SYS_IMMR;
+	pcmp = (pcmconf8xx_t *)(&(((immap_t *)CONFIG_SYS_IMMR)->im_pcmcia));
 
 	/* remove all power */
 	immap->im_ioport.iop_pcdat |= 0x0400;
@@ -164,8 +164,8 @@ int pcmcia_voltage_set(int slot, int vcc, int vpp)
 			" Slot %c, Vcc=%d.%d, Vpp=%d.%d\n",
 	'A'+slot, vcc/10, vcc%10, vpp/10, vcc%10);
 
-	immap = (immap_t *)CFG_IMMR;
-	pcmp = (pcmconf8xx_t *)(&(((immap_t *)CFG_IMMR)->im_pcmcia));
+	immap = (immap_t *)CONFIG_SYS_IMMR;
+	pcmp = (pcmconf8xx_t *)(&(((immap_t *)CONFIG_SYS_IMMR)->im_pcmcia));
 	/*
 	* Disable PCMCIA buffers (isolate the interface)
 	* and assert RESET signal
diff --git a/board/r360mpi/r360mpi.c b/board/r360mpi/r360mpi.c
index c51e412f4..b502e4d78 100644
--- a/board/r360mpi/r360mpi.c
+++ b/board/r360mpi/r360mpi.c
@@ -105,7 +105,7 @@ static long int dram_size (long int, long int *, long int);
 
 phys_size_t initdram (int board_type)
 {
-	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
 	volatile memctl8xx_t *memctl = &immap->im_memctl;
 	long int size8, size9;
 	long int size_b0 = 0;
@@ -120,7 +120,7 @@ phys_size_t initdram (int board_type)
 	 * with two SDRAM banks or four cycles every 31.2 us with one
 	 * bank. It will be adjusted after memory sizing.
 	 */
-	memctl->memc_mptpr = CFG_MPTPR_2BK_8K;
+	memctl->memc_mptpr = CONFIG_SYS_MPTPR_2BK_8K;
 
 	memctl->memc_mar = 0x00000088;
 
@@ -129,10 +129,10 @@ phys_size_t initdram (int board_type)
 	 * preliminary address - these have to be modified after the
 	 * SDRAM size has been determined.
 	 */
-	memctl->memc_or2 = CFG_OR2_PRELIM;
-	memctl->memc_br2 = CFG_BR2_PRELIM;
+	memctl->memc_or2 = CONFIG_SYS_OR2_PRELIM;
+	memctl->memc_br2 = CONFIG_SYS_BR2_PRELIM;
 
-	memctl->memc_mamr = CFG_MAMR_8COL & (~(MAMR_PTAE));	/* no refresh yet */
+	memctl->memc_mamr = CONFIG_SYS_MAMR_8COL & (~(MAMR_PTAE));	/* no refresh yet */
 
 	udelay (200);
 
@@ -152,7 +152,7 @@ phys_size_t initdram (int board_type)
 	 *
 	 * try 8 column mode
 	 */
-	size8 = dram_size (CFG_MAMR_8COL, (long *) SDRAM_BASE2_PRELIM,
+	size8 = dram_size (CONFIG_SYS_MAMR_8COL, (long *) SDRAM_BASE2_PRELIM,
 					   SDRAM_MAX_SIZE);
 
 	udelay (1000);
@@ -160,7 +160,7 @@ phys_size_t initdram (int board_type)
 	/*
 	 * try 9 column mode
 	 */
-	size9 = dram_size (CFG_MAMR_9COL, (long *) SDRAM_BASE2_PRELIM,
+	size9 = dram_size (CONFIG_SYS_MAMR_9COL, (long *) SDRAM_BASE2_PRELIM,
 					   SDRAM_MAX_SIZE);
 
 	if (size8 < size9) {		/* leave configuration at 9 columns */
@@ -168,7 +168,7 @@ phys_size_t initdram (int board_type)
 /*	debug ("SDRAM Bank 0 in 9 column mode: %ld MB\n", size >> 20);	*/
 	} else {			/* back to 8 columns            */
 		size_b0 = size8;
-		memctl->memc_mamr = CFG_MAMR_8COL;
+		memctl->memc_mamr = CONFIG_SYS_MAMR_8COL;
 		udelay (500);
 /*	debug ("SDRAM Bank 0 in 8 column mode: %ld MB\n", size >> 20);	*/
 	}
@@ -181,7 +181,7 @@ phys_size_t initdram (int board_type)
 	 */
 	if ((size_b0 < 0x02000000)) {
 		/* reduce to 15.6 us (62.4 us / quad) */
-		memctl->memc_mptpr = CFG_MPTPR_2BK_4K;
+		memctl->memc_mptpr = CONFIG_SYS_MPTPR_2BK_4K;
 		udelay (1000);
 	}
 
@@ -189,20 +189,20 @@ phys_size_t initdram (int board_type)
 	 * Final mapping
 	 */
 
-	memctl->memc_or1 = ((-size_b0) & 0xFFFF0000) | CFG_OR_TIMING_SDRAM;
-	memctl->memc_br1 = (CFG_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V;
+	memctl->memc_or1 = ((-size_b0) & 0xFFFF0000) | CONFIG_SYS_OR_TIMING_SDRAM;
+	memctl->memc_br1 = (CONFIG_SYS_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V;
 
 	/* adjust refresh rate depending on SDRAM type, one bank */
 	reg = memctl->memc_mptpr;
-	reg >>= 1;		/* reduce to CFG_MPTPR_1BK_8K / _4K */
+	reg >>= 1;		/* reduce to CONFIG_SYS_MPTPR_1BK_8K / _4K */
 	memctl->memc_mptpr = reg;
 
 	udelay (10000);
 
 #ifdef CONFIG_CAN_DRIVER
 	/* Initialize OR3 / BR3 */
-	memctl->memc_or3 = CFG_OR3_CAN;		/* switch GPLB_5 to GPLA_5 */
-	memctl->memc_br3 = CFG_BR3_CAN;
+	memctl->memc_or3 = CONFIG_SYS_OR3_CAN;		/* switch GPLB_5 to GPLA_5 */
+	memctl->memc_br3 = CONFIG_SYS_BR3_CAN;
 
 	/* Initialize MBMR */
 	memctl->memc_mbmr = MBMR_GPL_B4DIS;	/* GPL_B4 works as UPWAITB */
@@ -256,7 +256,7 @@ phys_size_t initdram (int board_type)
 static long int dram_size (long int mamr_value,
 			   long int *base, long int maxsize)
 {
-	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
 	volatile memctl8xx_t *memctl = &immap->im_memctl;
 
 	memctl->memc_mamr = mamr_value;
@@ -268,7 +268,7 @@ static long int dram_size (long int mamr_value,
 
 void r360_i2c_lcd_write (uchar data0, uchar data1)
 {
-	if (i2c_write (CFG_I2C_LCD_ADDR, data0, 1, &data1, 1)) {
+	if (i2c_write (CONFIG_SYS_I2C_LCD_ADDR, data0, 1, &data1, 1)) {
 		printf("Can't write lcd data 0x%02X 0x%02X.\n", data0, data1);
 	}
 }
@@ -292,9 +292,9 @@ int misc_init_r (void)
 	char *str;
 	int i;
 
-	i2c_init (CFG_I2C_SPEED, CFG_I2C_SLAVE);
+	i2c_init (CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
 
-	i2c_read (CFG_I2C_KEY_ADDR, 0, 0, (uchar *)kbd_data, KEYBD_DATALEN);
+	i2c_read (CONFIG_SYS_I2C_KEY_ADDR, 0, 0, (uchar *)kbd_data, KEYBD_DATALEN);
 
 	for (i = 0; i < KEYBD_DATALEN; ++i) {
 		sprintf (keybd_env + i + i, "%02X", kbd_data[i]);
@@ -397,10 +397,10 @@ int do_kbd (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
 	uchar keybd_env[2 * KEYBD_DATALEN + 1];
 	int i;
 
-	i2c_init (CFG_I2C_SPEED, CFG_I2C_SLAVE);
+	i2c_init (CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
 
 	/* Read keys */
-	i2c_read (CFG_I2C_KEY_ADDR, 0, 0, kbd_data, KEYBD_DATALEN);
+	i2c_read (CONFIG_SYS_I2C_KEY_ADDR, 0, 0, kbd_data, KEYBD_DATALEN);
 
 	puts ("Keys:");
 	for (i = 0; i < KEYBD_DATALEN; ++i) {
diff --git a/board/r360mpi/u-boot.lds b/board/r360mpi/u-boot.lds
index 5fcd5c9f1..db28544ba 100644
--- a/board/r360mpi/u-boot.lds
+++ b/board/r360mpi/u-boot.lds
@@ -61,7 +61,7 @@ SECTIONS
     cpu/mpc8xx/traps.o		(.text)
 /***
     . = env_offset;
-    common/environment.o	(.text)
+    common/env_embedded.o	(.text)
 ***/
     *(.text)
     *(.fixup)
@@ -132,12 +132,13 @@ SECTIONS
    *(.dynbss)
    *(.bss)
    *(COMMON)
+   . = ALIGN(4);
   }
   _end = . ;
   PROVIDE (end = .);
   . = ALIGN(128 * 1024);
   .ppcenv	:
   {
-    common/environment.o (.ppcenv)
+    common/env_embedded.o (.ppcenv)
   }
 }
diff --git a/board/rattler/rattler.c b/board/rattler/rattler.c
index ad75c2156..80f57dc42 100644
--- a/board/rattler/rattler.c
+++ b/board/rattler/rattler.c
@@ -35,31 +35,31 @@
  * according to the five values podr/pdir/ppar/psor/pdat for that entry
  */
 
-#define CFG_FCC1 (CONFIG_ETHER_INDEX == 1)
-#define CFG_FCC2 (CONFIG_ETHER_INDEX == 2)
+#define CONFIG_SYS_FCC1 (CONFIG_ETHER_INDEX == 1)
+#define CONFIG_SYS_FCC2 (CONFIG_ETHER_INDEX == 2)
 
 const iop_conf_t iop_conf_tab[4][32] = {
 
     /* Port A */
     {	/*	      conf      ppar psor pdir podr pdat */
-	/* PA31 */ { CFG_FCC1,   1,   1,   0,   0,   0 }, /* FCC1 MII COL    */
-	/* PA30 */ { CFG_FCC1,   1,   1,   0,   0,   0 }, /* FCC1 MII CRS    */
-	/* PA29 */ { CFG_FCC1,   1,   1,   1,   0,   0 }, /* FCC1 MII TX_ER  */
-	/* PA28 */ { CFG_FCC1,   1,   1,   1,   0,   0 }, /* FCC1 MII TX_EN  */
-	/* PA27 */ { CFG_FCC1,   1,   1,   0,   0,   0 }, /* FCC1 MII RX_DV  */
-	/* PA26 */ { CFG_FCC1,   1,   1,   0,   0,   0 }, /* FCC1 MII RX_ER  */
+	/* PA31 */ { CONFIG_SYS_FCC1,   1,   1,   0,   0,   0 }, /* FCC1 MII COL    */
+	/* PA30 */ { CONFIG_SYS_FCC1,   1,   1,   0,   0,   0 }, /* FCC1 MII CRS    */
+	/* PA29 */ { CONFIG_SYS_FCC1,   1,   1,   1,   0,   0 }, /* FCC1 MII TX_ER  */
+	/* PA28 */ { CONFIG_SYS_FCC1,   1,   1,   1,   0,   0 }, /* FCC1 MII TX_EN  */
+	/* PA27 */ { CONFIG_SYS_FCC1,   1,   1,   0,   0,   0 }, /* FCC1 MII RX_DV  */
+	/* PA26 */ { CONFIG_SYS_FCC1,   1,   1,   0,   0,   0 }, /* FCC1 MII RX_ER  */
 	/* PA25 */ { 0,          0,   0,   0,   0,   0 }, /* PA25            */
 	/* PA24 */ { 0,          0,   0,   0,   0,   0 }, /* PA24            */
 	/* PA23 */ { 0,          0,   0,   0,   0,   0 }, /* PA23            */
 	/* PA22 */ { 1,          0,   0,   1,   0,   1 }, /* Eth PHYs reset  */
-	/* PA21 */ { CFG_FCC1,   1,   0,   1,   0,   0 }, /* FCC1 MII TxD[3] */
-	/* PA20 */ { CFG_FCC1,   1,   0,   1,   0,   0 }, /* FCC1 MII TxD[2] */
-	/* PA19 */ { CFG_FCC1,   1,   0,   1,   0,   0 }, /* FCC1 MII TxD[1] */
-	/* PA18 */ { CFG_FCC1,   1,   0,   1,   0,   0 }, /* FCC1 MII TxD[0] */
-	/* PA17 */ { CFG_FCC1,   1,   0,   0,   0,   0 }, /* FCC1 MII RxD[0] */
-	/* PA16 */ { CFG_FCC1,   1,   0,   0,   0,   0 }, /* FCC1 MII RxD[1] */
-	/* PA15 */ { CFG_FCC1,   1,   0,   0,   0,   0 }, /* FCC1 MII RxD[2] */
-	/* PA14 */ { CFG_FCC1,   1,   0,   0,   0,   0 }, /* FCC1 MII RxD[3] */
+	/* PA21 */ { CONFIG_SYS_FCC1,   1,   0,   1,   0,   0 }, /* FCC1 MII TxD[3] */
+	/* PA20 */ { CONFIG_SYS_FCC1,   1,   0,   1,   0,   0 }, /* FCC1 MII TxD[2] */
+	/* PA19 */ { CONFIG_SYS_FCC1,   1,   0,   1,   0,   0 }, /* FCC1 MII TxD[1] */
+	/* PA18 */ { CONFIG_SYS_FCC1,   1,   0,   1,   0,   0 }, /* FCC1 MII TxD[0] */
+	/* PA17 */ { CONFIG_SYS_FCC1,   1,   0,   0,   0,   0 }, /* FCC1 MII RxD[0] */
+	/* PA16 */ { CONFIG_SYS_FCC1,   1,   0,   0,   0,   0 }, /* FCC1 MII RxD[1] */
+	/* PA15 */ { CONFIG_SYS_FCC1,   1,   0,   0,   0,   0 }, /* FCC1 MII RxD[2] */
+	/* PA14 */ { CONFIG_SYS_FCC1,   1,   0,   0,   0,   0 }, /* FCC1 MII RxD[3] */
 	/* PA13 */ { 0,          0,   0,   0,   0,   0 }, /* PA13            */
 	/* PA12 */ { 0,          0,   0,   0,   0,   0 }, /* PA12            */
 	/* PA11 */ { 0,          0,   0,   0,   0,   0 }, /* PA11            */
@@ -78,20 +78,20 @@ const iop_conf_t iop_conf_tab[4][32] = {
 
     /* Port B */
     {   /*	      conf      ppar psor pdir podr pdat */
-	/* PB31 */ { CFG_FCC2,   1,   0,   1,   0,   0 }, /* FCC2 MII TX_ER  */
-	/* PB30 */ { CFG_FCC2,   1,   0,   0,   0,   0 }, /* FCC2 MII RX_DV  */
-	/* PB29 */ { CFG_FCC2,   1,   1,   1,   0,   0 }, /* FCC2 MII TX_EN  */
-	/* PB28 */ { CFG_FCC2,   1,   0,   0,   0,   0 }, /* FCC2 MII RX_ER  */
-	/* PB27 */ { CFG_FCC2,   1,   0,   0,   0,   0 }, /* FCC2 MII COL    */
-	/* PB26 */ { CFG_FCC2,   1,   0,   0,   0,   0 }, /* FCC2 MII CRS    */
-	/* PB25 */ { CFG_FCC2,   1,   0,   1,   0,   0 }, /* FCC2 MII TxD[3] */
-	/* PB24 */ { CFG_FCC2,   1,   0,   1,   0,   0 }, /* FCC2 MII TxD[2] */
-	/* PB23 */ { CFG_FCC2,   1,   0,   1,   0,   0 }, /* FCC2 MII TxD[1] */
-	/* PB22 */ { CFG_FCC2,   1,   0,   1,   0,   0 }, /* FCC2 MII TxD[0] */
-	/* PB21 */ { CFG_FCC2,   1,   0,   0,   0,   0 }, /* FCC2 MII RxD[0] */
-	/* PB20 */ { CFG_FCC2,   1,   0,   0,   0,   0 }, /* FCC2 MII RxD[1] */
-	/* PB19 */ { CFG_FCC2,   1,   0,   0,   0,   0 }, /* FCC2 MII RxD[2] */
-	/* PB18 */ { CFG_FCC2,   1,   0,   0,   0,   0 }, /* FCC2 MII RxD[3] */
+	/* PB31 */ { CONFIG_SYS_FCC2,   1,   0,   1,   0,   0 }, /* FCC2 MII TX_ER  */
+	/* PB30 */ { CONFIG_SYS_FCC2,   1,   0,   0,   0,   0 }, /* FCC2 MII RX_DV  */
+	/* PB29 */ { CONFIG_SYS_FCC2,   1,   1,   1,   0,   0 }, /* FCC2 MII TX_EN  */
+	/* PB28 */ { CONFIG_SYS_FCC2,   1,   0,   0,   0,   0 }, /* FCC2 MII RX_ER  */
+	/* PB27 */ { CONFIG_SYS_FCC2,   1,   0,   0,   0,   0 }, /* FCC2 MII COL    */
+	/* PB26 */ { CONFIG_SYS_FCC2,   1,   0,   0,   0,   0 }, /* FCC2 MII CRS    */
+	/* PB25 */ { CONFIG_SYS_FCC2,   1,   0,   1,   0,   0 }, /* FCC2 MII TxD[3] */
+	/* PB24 */ { CONFIG_SYS_FCC2,   1,   0,   1,   0,   0 }, /* FCC2 MII TxD[2] */
+	/* PB23 */ { CONFIG_SYS_FCC2,   1,   0,   1,   0,   0 }, /* FCC2 MII TxD[1] */
+	/* PB22 */ { CONFIG_SYS_FCC2,   1,   0,   1,   0,   0 }, /* FCC2 MII TxD[0] */
+	/* PB21 */ { CONFIG_SYS_FCC2,   1,   0,   0,   0,   0 }, /* FCC2 MII RxD[0] */
+	/* PB20 */ { CONFIG_SYS_FCC2,   1,   0,   0,   0,   0 }, /* FCC2 MII RxD[1] */
+	/* PB19 */ { CONFIG_SYS_FCC2,   1,   0,   0,   0,   0 }, /* FCC2 MII RxD[2] */
+	/* PB18 */ { CONFIG_SYS_FCC2,   1,   0,   0,   0,   0 }, /* FCC2 MII RxD[3] */
 	/* PB17 */ { 0,          0,   0,   0,   0,   0 }, /* non-existent    */
 	/* PB16 */ { 0,          0,   0,   0,   0,   0 }, /* non-existent    */
 	/* PB15 */ { 0,          0,   0,   0,   0,   0 }, /* non-existent    */
@@ -123,12 +123,12 @@ const iop_conf_t iop_conf_tab[4][32] = {
 	/* PC25 */ { 0,          0,   0,   0,   0,   0 }, /* PC25            */
 	/* PC24 */ { 0,          0,   0,   0,   0,   0 }, /* PC24            */
 	/* PC23 */ { 0,          0,   0,   0,   0,   0 }, /* PC23            */
-	/* PC22 */ { CFG_FCC1,   1,   0,   0,   0,   0 }, /* FCC1 TxClk (CLK10) */
-	/* PC21 */ { CFG_FCC1,   1,   0,   0,   0,   0 }, /* FCC1 RxClk (CLK11) */
+	/* PC22 */ { CONFIG_SYS_FCC1,   1,   0,   0,   0,   0 }, /* FCC1 TxClk (CLK10) */
+	/* PC21 */ { CONFIG_SYS_FCC1,   1,   0,   0,   0,   0 }, /* FCC1 RxClk (CLK11) */
 	/* PC20 */ { 0,          0,   0,   0,   0,   0 }, /* PC20            */
 	/* PC19 */ { 0,          0,   0,   0,   0,   0 }, /* PC19            */
-	/* PC18 */ { CFG_FCC2,   1,   0,   0,   0,   0 }, /* FCC2 TxClk (CLK14) */
-	/* PC17 */ { CFG_FCC2,   1,   0,   0,   0,   0 }, /* FCC2 RxClk (CLK15) */
+	/* PC18 */ { CONFIG_SYS_FCC2,   1,   0,   0,   0,   0 }, /* FCC2 TxClk (CLK14) */
+	/* PC17 */ { CONFIG_SYS_FCC2,   1,   0,   0,   0,   0 }, /* FCC2 RxClk (CLK15) */
 	/* PC16 */ { 0,          0,   0,   0,   0,   0 }, /* PC16            */
 	/* PC15 */ { 0,          0,   0,   0,   0,   0 }, /* PC15            */
 	/* PC14 */ { 0,          0,   0,   0,   0,   0 }, /* PC14            */
@@ -187,26 +187,26 @@ const iop_conf_t iop_conf_tab[4][32] = {
 
 phys_size_t initdram(int board_type)
 {
-	long int msize = CFG_SDRAM_SIZE;
+	long int msize = CONFIG_SYS_SDRAM_SIZE;
 
-#ifndef CFG_RAMBOOT
-	volatile immap_t *immap = (immap_t *)CFG_IMMR;
+#ifndef CONFIG_SYS_RAMBOOT
+	volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR;
 	volatile memctl8260_t *memctl = &immap->im_memctl;
-	vu_char *ramaddr = (vu_char *)CFG_SDRAM_BASE;
+	vu_char *ramaddr = (vu_char *)CONFIG_SYS_SDRAM_BASE;
 	uchar c = 0xFF;
-	uint psdmr = CFG_PSDMR;
+	uint psdmr = CONFIG_SYS_PSDMR;
 	int i;
 
 	immap->im_siu_conf.sc_ppc_acr  = 0x02;
 	immap->im_siu_conf.sc_ppc_alrh = 0x30126745;
 	immap->im_siu_conf.sc_tescr1   = 0x00004000;
 
-	memctl->memc_mptpr = CFG_MPTPR;
+	memctl->memc_mptpr = CONFIG_SYS_MPTPR;
 
 	/* Initialise 60x bus SDRAM */
-	memctl->memc_psrt = CFG_PSRT;
-	memctl->memc_or1  = CFG_SDRAM_OR;
-	memctl->memc_br1  = CFG_SDRAM_BR;
+	memctl->memc_psrt = CONFIG_SYS_PSRT;
+	memctl->memc_or1  = CONFIG_SYS_SDRAM_OR;
+	memctl->memc_br1  = CONFIG_SYS_SDRAM_BR;
 	memctl->memc_psdmr = psdmr | PSDMR_OP_PREA; /* Precharge all banks */
 	*ramaddr = c;
 	memctl->memc_psdmr = psdmr | PSDMR_OP_CBRR; /* CBR refresh */
@@ -216,7 +216,7 @@ phys_size_t initdram(int board_type)
 	*ramaddr = c;
 	memctl->memc_psdmr = psdmr | PSDMR_RFEN;    /* Refresh enable */
 	*ramaddr = c;
-#endif /* !CFG_RAMBOOT */
+#endif /* !CONFIG_SYS_RAMBOOT */
 
 	/* Return total 60x bus SDRAM size */
 	return msize * 1024 * 1024;
@@ -224,7 +224,7 @@ phys_size_t initdram(int board_type)
 
 int checkboard(void)
 {
-	vu_char *bcsr = (vu_char *)CFG_BCSR;
+	vu_char *bcsr = (vu_char *)CONFIG_SYS_BCSR;
 
 	printf("Board: Rattler Rev. %c\n", bcsr[0x20] + 0x40);
 	return 0;
diff --git a/board/rbc823/flash.c b/board/rbc823/flash.c
index 26ebcae86..cb1e089f3 100644
--- a/board/rbc823/flash.c
+++ b/board/rbc823/flash.c
@@ -24,7 +24,7 @@
 #include <common.h>
 #include <mpc8xx.h>
 
-flash_info_t	flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips	*/
+flash_info_t	flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips	*/
 
 /*-----------------------------------------------------------------------
  * Functions
@@ -42,20 +42,20 @@ unsigned long flash_init (void)
 	int i;
 
 	/* Init: no FLASHes known */
-	for (i=0; i < CFG_MAX_FLASH_BANKS; ++i)
+	for (i=0; i < CONFIG_SYS_MAX_FLASH_BANKS; ++i)
 	    flash_info[i].flash_id = FLASH_UNKNOWN;
 
 	/* Detect size */
-	size_b0 = flash_get_size((vu_long *)CFG_FLASH_BASE, &flash_info[0]);
+	size_b0 = flash_get_size((vu_long *)CONFIG_SYS_FLASH_BASE, &flash_info[0]);
 
 	/* Setup offsets */
-	flash_get_offsets (CFG_FLASH_BASE, &flash_info[0]);
+	flash_get_offsets (CONFIG_SYS_FLASH_BASE, &flash_info[0]);
 
-#if CFG_MONITOR_BASE >= CFG_FLASH_BASE
+#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE
 	/* Monitor protection ON by default */
 	flash_protect(FLAG_PROTECT_SET,
-		      CFG_MONITOR_BASE,
-		      CFG_MONITOR_BASE+monitor_flash_len-1,
+		      CONFIG_SYS_MONITOR_BASE,
+		      CONFIG_SYS_MONITOR_BASE+monitor_flash_len-1,
 		      &flash_info[0]);
 #endif
 
@@ -322,7 +322,7 @@ int	flash_erase (flash_info_t *info, int s_first, int s_last)
 
 	while ((addr[0] & 0xFF) != 0xFF)
 	{
-		if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+		if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
 			printf ("Timeout\n");
 			return 1;
 		}
@@ -454,7 +454,7 @@ static int write_word (flash_info_t *info, ulong dest, ulong data)
 	    start = get_timer (0);
 	    while ((*cdest ^ *cdata) & 0x80)
 	    {
-		if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+		if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
 			return (1);
 		}
 	    }
diff --git a/board/rbc823/kbd.c b/board/rbc823/kbd.c
index 6d530f6b4..1d48f6d0b 100644
--- a/board/rbc823/kbd.c
+++ b/board/rbc823/kbd.c
@@ -48,7 +48,7 @@ DECLARE_GLOBAL_DATA_PTR;
 
 void smc1_setbrg (void)
 {
-	volatile immap_t *im = (immap_t *)CFG_IMMR;
+	volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
 	volatile cpm8xx_t *cp = &(im->im_cpm);
 
 	/* Set up the baud rate generator.
@@ -65,7 +65,7 @@ void smc1_setbrg (void)
 
 int smc1_init (void)
 {
-	volatile immap_t *im = (immap_t *)CFG_IMMR;
+	volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
 	volatile smc_t *sp;
 	volatile smc_uart_t *up;
 	volatile cbd_t *tbdf, *rbdf;
@@ -86,15 +86,15 @@ int smc1_init (void)
 	im->im_siu_conf.sc_sdcr = 1;
 
 	/* clear error conditions */
-#ifdef	CFG_SDSR
-	im->im_sdma.sdma_sdsr = CFG_SDSR;
+#ifdef	CONFIG_SYS_SDSR
+	im->im_sdma.sdma_sdsr = CONFIG_SYS_SDSR;
 #else
 	im->im_sdma.sdma_sdsr = 0x83;
 #endif
 
 	/* clear SDMA interrupt mask */
-#ifdef	CFG_SDMR
-	im->im_sdma.sdma_sdmr = CFG_SDMR;
+#ifdef	CONFIG_SYS_SDMR
+	im->im_sdma.sdma_sdmr = CONFIG_SYS_SDMR;
 #else
 	im->im_sdma.sdma_sdmr = 0x00;
 #endif
@@ -109,7 +109,7 @@ int smc1_init (void)
 	 * the buffer descriptors.
 	 */
 
-#ifdef CFG_ALLOC_DPRAM
+#ifdef CONFIG_SYS_ALLOC_DPRAM
 	dpaddr = dpram_alloc_align (sizeof(cbd_t)*2 + 2, 8) ;
 #else
 	dpaddr = CPM_KEYBOARD_BASE ;
@@ -182,7 +182,7 @@ void smc1_putc(const char c)
 	volatile cbd_t		*tbdf;
 	volatile char		*buf;
 	volatile smc_uart_t	*up;
-	volatile immap_t	*im = (immap_t *)CFG_IMMR;
+	volatile immap_t	*im = (immap_t *)CONFIG_SYS_IMMR;
 	volatile cpm8xx_t	*cpmp = &(im->im_cpm);
 
 	up = (smc_uart_t *)&cpmp->cp_dparam[PROFF_SMC];
@@ -210,7 +210,7 @@ int smc1_getc(void)
 	volatile cbd_t		*rbdf;
 	volatile unsigned char	*buf;
 	volatile smc_uart_t	*up;
-	volatile immap_t	*im = (immap_t *)CFG_IMMR;
+	volatile immap_t	*im = (immap_t *)CONFIG_SYS_IMMR;
 	volatile cpm8xx_t	*cpmp = &(im->im_cpm);
 	unsigned char		c;
 
@@ -235,7 +235,7 @@ int smc1_tstc(void)
 {
 	volatile cbd_t		*rbdf;
 	volatile smc_uart_t	*up;
-	volatile immap_t	*im = (immap_t *)CFG_IMMR;
+	volatile immap_t	*im = (immap_t *)CONFIG_SYS_IMMR;
 	volatile cpm8xx_t	*cpmp = &(im->im_cpm);
 
 	up = (smc_uart_t *)&cpmp->cp_dparam[PROFF_SMC];
diff --git a/board/rbc823/rbc823.c b/board/rbc823/rbc823.c
index 5b62af614..b2949060c 100644
--- a/board/rbc823/rbc823.c
+++ b/board/rbc823/rbc823.c
@@ -144,7 +144,7 @@ int checkboard (void)
 
 phys_size_t initdram (int board_type)
 {
-	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
 	volatile memctl8xx_t *memctl = &immap->im_memctl;
 	long int size_b0, size8, size9;
 
@@ -154,15 +154,15 @@ phys_size_t initdram (int board_type)
 	/*
 	 * 1 Bank of 64Mbit x 2 devices
 	 */
-	memctl->memc_mptpr = CFG_MPTPR_1BK_4K;
+	memctl->memc_mptpr = CONFIG_SYS_MPTPR_1BK_4K;
 	memctl->memc_mar = 0x00000088;
 
 	/*
 	 * Map controller SDRAM bank 0
 	 */
-	memctl->memc_or4 = CFG_OR4_PRELIM;
-	memctl->memc_br4 = CFG_BR4_PRELIM;
-	memctl->memc_mamr = CFG_MAMR_8COL & (~(MAMR_PTAE));	/* no refresh yet */
+	memctl->memc_or4 = CONFIG_SYS_OR4_PRELIM;
+	memctl->memc_br4 = CONFIG_SYS_BR4_PRELIM;
+	memctl->memc_mamr = CONFIG_SYS_MAMR_8COL & (~(MAMR_PTAE));	/* no refresh yet */
 	udelay (200);
 
 	/*
@@ -170,11 +170,11 @@ phys_size_t initdram (int board_type)
 	 */
 	memctl->memc_mcr = 0x80008105;	/* SDRAM bank 0 */
 	udelay (1);
-	memctl->memc_mamr = (CFG_MAMR_8COL & ~(MAMR_TLFA_MSK)) | MAMR_TLFA_8X;
+	memctl->memc_mamr = (CONFIG_SYS_MAMR_8COL & ~(MAMR_TLFA_MSK)) | MAMR_TLFA_8X;
 	udelay (200);
 	memctl->memc_mcr = 0x80008130;	/* SDRAM bank 0 - execute twice */
 	udelay (1);
-	memctl->memc_mamr = (CFG_MAMR_8COL & ~(MAMR_TLFA_MSK)) | MAMR_TLFA_4X;
+	memctl->memc_mamr = (CONFIG_SYS_MAMR_8COL & ~(MAMR_TLFA_MSK)) | MAMR_TLFA_4X;
 	udelay (200);
 
 	memctl->memc_mamr |= MAMR_PTAE;	/* enable refresh */
@@ -186,21 +186,21 @@ phys_size_t initdram (int board_type)
 	 * with two SDRAM banks or four cycles every 31.2 us with one
 	 * bank. It will be adjusted after memory sizing.
 	 */
-	memctl->memc_mptpr = CFG_MPTPR_2BK_4K;	/* 16: but should be: CFG_MPTPR_1BK_4K */
+	memctl->memc_mptpr = CONFIG_SYS_MPTPR_2BK_4K;	/* 16: but should be: CONFIG_SYS_MPTPR_1BK_4K */
 
 	/*
 	 * Check Bank 0 Memory Size for re-configuration
 	 *
 	 * try 8 column mode
 	 */
-	size8 = dram_size (CFG_MAMR_8COL, (long *) SDRAM_BASE4_PRELIM,
+	size8 = dram_size (CONFIG_SYS_MAMR_8COL, (long *) SDRAM_BASE4_PRELIM,
 			   SDRAM_MAX_SIZE);
 	udelay (1000);
 
 	/*
 	 * try 9 column mode
 	 */
-	size9 = dram_size (CFG_MAMR_9COL, (long *) SDRAM_BASE4_PRELIM,
+	size9 = dram_size (CONFIG_SYS_MAMR_9COL, (long *) SDRAM_BASE4_PRELIM,
 			   SDRAM_MAX_SIZE);
 
 	if (size8 < size9) {	/* leave configuration at 9 columns     */
@@ -208,7 +208,7 @@ phys_size_t initdram (int board_type)
 /*	debug ("SDRAM Bank 0 in 9 column mode: %ld MB\n", size >> 20);	*/
 	} else {		/* back to 8 columns                    */
 		size_b0 = size8;
-		memctl->memc_mamr = CFG_MAMR_8COL;
+		memctl->memc_mamr = CONFIG_SYS_MAMR_8COL;
 		udelay (500);
 /*	debug ("SDRAM Bank 0 in 8 column mode: %ld MB\n", size >> 20);	*/
 	}
@@ -221,14 +221,14 @@ phys_size_t initdram (int board_type)
 	 */
 	if ((size_b0 < 0x02000000)) {
 		/* reduce to 15.6 us (62.4 us / quad) */
-		memctl->memc_mptpr = CFG_MPTPR_2BK_4K;
+		memctl->memc_mptpr = CONFIG_SYS_MPTPR_2BK_4K;
 		udelay (1000);
 	}
 
 	/* SDRAM Bank 0 is bigger - map first       */
 
-	memctl->memc_or4 = ((-size_b0) & 0xFFFF0000) | CFG_OR_TIMING_SDRAM;
-	memctl->memc_br4 = (CFG_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V;
+	memctl->memc_or4 = ((-size_b0) & 0xFFFF0000) | CONFIG_SYS_OR_TIMING_SDRAM;
+	memctl->memc_br4 = (CONFIG_SYS_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V;
 
 	udelay (10000);
 
@@ -248,7 +248,7 @@ phys_size_t initdram (int board_type)
 static long int dram_size (long int mamr_value, long int *base,
 			   long int maxsize)
 {
-	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
 	volatile memctl8xx_t *memctl = &immap->im_memctl;
 
 	memctl->memc_mamr = mamr_value;
@@ -258,7 +258,7 @@ static long int dram_size (long int mamr_value, long int *base,
 
 void doc_init (void)
 {
-	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
 	volatile memctl8xx_t *memctl = &immap->im_memctl;
 
 	upmconfig (UPMB, (uint *) static_table,
diff --git a/board/rbc823/u-boot.lds b/board/rbc823/u-boot.lds
index e41782554..63bd21bc3 100644
--- a/board/rbc823/u-boot.lds
+++ b/board/rbc823/u-boot.lds
@@ -63,7 +63,7 @@ SECTIONS
     lib_generic/zlib.o		(.text)
 
     . = env_offset;
-    common/environment.o(.text)
+    common/env_embedded.o(.text)
 
     *(.text)
     *(.fixup)
@@ -133,6 +133,7 @@ SECTIONS
    *(.dynbss)
    *(.bss)
    *(COMMON)
+   . = ALIGN(4);
   }
   _end = . ;
   PROVIDE (end = .);
diff --git a/board/MigoR/Makefile b/board/renesas/MigoR/Makefile
index 661b59d00..661b59d00 100644
--- a/board/MigoR/Makefile
+++ b/board/renesas/MigoR/Makefile
diff --git a/board/MigoR/config.mk b/board/renesas/MigoR/config.mk
index 2c5085a91..2c5085a91 100644
--- a/board/MigoR/config.mk
+++ b/board/renesas/MigoR/config.mk
diff --git a/board/MigoR/lowlevel_init.S b/board/renesas/MigoR/lowlevel_init.S
index e48f7b3b1..4c1900ec2 100644
--- a/board/MigoR/lowlevel_init.S
+++ b/board/renesas/MigoR/lowlevel_init.S
@@ -1,5 +1,5 @@
 /*
- * Copyright (C) 2007
+ * Copyright (C) 2007-2008
  * Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
  *
  * Copyright (C) 2007
@@ -211,25 +211,25 @@ PFC_PULCR_D:	.long	0x6000
 PFC_DRVCR_D:	.long	0x0464
 FRQCR_D:	.long	0x07033639
 PLLCR_D:	.long	0x00005000
-DLLFRQ_D:	.long	0x000004F6	! 20080115
+DLLFRQ_D:	.long	0x000004F6
 
 CMNCR_A:	.long	CMNCR
-CMNCR_D:	.long	0x0000001B	! 20080115
-CS0BCR_A:	.long	CS0BCR		! Flash bank 1
+CMNCR_D:	.long	0x0000001B
+CS0BCR_A:	.long	CS0BCR
 CS0BCR_D:	.long	0x24920400
-CS4BCR_A:	.long	CS4BCR		!
-CS4BCR_D:	.long	0x10003400	! 20080115
-CS5ABCR_A:	.long	CS5ABCR		!
+CS4BCR_A:	.long	CS4BCR
+CS4BCR_D:	.long	0x00003400
+CS5ABCR_A:	.long	CS5ABCR
 CS5ABCR_D:	.long	0x24920400
-CS5BBCR_A:	.long	CS5BBCR		!
+CS5BBCR_A:	.long	CS5BBCR
 CS5BBCR_D:	.long	0x24920400
-CS6ABCR_A:	.long	CS6ABCR		!
+CS6ABCR_A:	.long	CS6ABCR
 CS6ABCR_D:	.long	0x24920400
 
 CS0WCR_A:	.long	CS0WCR
 CS0WCR_D:	.long	0x00000380
 CS4WCR_A:	.long	CS4WCR
-CS4WCR_D:	.long	0x00100A81	! 20080115
+CS4WCR_D:	.long	0x00110080
 CS5AWCR_A:	.long	CS5AWCR
 CS5AWCR_D:	.long	0x00000300
 CS5BWCR_A:	.long	CS5BWCR
@@ -238,20 +238,20 @@ CS6AWCR_A:	.long	CS6AWCR
 CS6AWCR_D:	.long	0x00000300
 
 SDCR_A:		.long	SBSC_SDCR
-SDCR_D:		.long	0x80160809	! 20080115
+SDCR_D:		.long	0x80160809
 SDWCR_A:	.long	SBSC_SDWCR
-SDWCR_D:	.long	0x0014450C	! 20080115
+SDWCR_D:	.long	0x0014450C
 SDPCR_A:	.long	SBSC_SDPCR
 SDPCR_D:	.long	0x00000087
 RTCOR_A:	.long	SBSC_RTCOR
 RTCNT_A:	.long	SBSC_RTCNT
 RTCNT_D:	.long	0xA55A0012
-RTCOR_D:	.long	0xA55A001C	! 20080115
+RTCOR_D:	.long	0xA55A001C
 RTCSR_A:	.long	SBSC_RTCSR
 RFCR_A:		.long	SBSC_RFCR
 RFCR_D:		.long	0xA55A0221
-RTCSR_D:	.long	0xA55A009a	! 20080115
-SDMR3_A:	.long	0xFE581180	! 20080115
+RTCSR_D:	.long	0xA55A009a
+SDMR3_A:	.long	0xFE581180
 
 SR_MASK_D:	.long	0xEFFFFF0F
 
@@ -260,5 +260,5 @@ SR_MASK_D:	.long	0xEFFFFF0F
 SBSCR_D:	.word	0x0044
 PSCR_D:		.word	0x0000
 RWTCSR_D_1:	.word	0xA507
-RWTCSR_D_2:	.word	0xA504		! 20080115
+RWTCSR_D_2:	.word	0xA504
 RWTCNT_D:	.word	0x5A00
diff --git a/board/MigoR/migo_r.c b/board/renesas/MigoR/migo_r.c
index b31f37d0f..204ca78fa 100644
--- a/board/MigoR/migo_r.c
+++ b/board/renesas/MigoR/migo_r.c
@@ -42,9 +42,9 @@ int dram_init (void)
 {
 	DECLARE_GLOBAL_DATA_PTR;
 
-	gd->bd->bi_memstart = CFG_SDRAM_BASE;
-	gd->bd->bi_memsize = CFG_SDRAM_SIZE;
-	printf("DRAM:  %dMB\n", CFG_SDRAM_SIZE / (1024 * 1024));
+	gd->bd->bi_memstart = CONFIG_SYS_SDRAM_BASE;
+	gd->bd->bi_memsize = CONFIG_SYS_SDRAM_SIZE;
+	printf("DRAM:  %dMB\n", CONFIG_SYS_SDRAM_SIZE / (1024 * 1024));
 	return 0;
 }
 
diff --git a/board/MigoR/u-boot.lds b/board/renesas/MigoR/u-boot.lds
index 692bc6291..f9c1effa4 100644
--- a/board/MigoR/u-boot.lds
+++ b/board/renesas/MigoR/u-boot.lds
@@ -49,9 +49,9 @@ SECTIONS
 	{
 		cpu/sh4/start.o		(.text)
 		. = ALIGN(8192);
-		common/environment.o	(.ppcenv)
+		common/env_embedded.o	(.ppcenv)
 		. = ALIGN(8192);
-		common/environment.o	(.ppcenvr)
+		common/env_embedded.o	(.ppcenvr)
 		. = ALIGN(8192);
 		*(.text)
 		. = ALIGN(4);
diff --git a/board/ap325rxa/Makefile b/board/renesas/ap325rxa/Makefile
index 21f3e6e29..21f3e6e29 100644
--- a/board/ap325rxa/Makefile
+++ b/board/renesas/ap325rxa/Makefile
diff --git a/board/ap325rxa/ap325rxa.c b/board/renesas/ap325rxa/ap325rxa.c
index cfa02617a..9f1112a43 100644
--- a/board/ap325rxa/ap325rxa.c
+++ b/board/renesas/ap325rxa/ap325rxa.c
@@ -144,9 +144,9 @@ int dram_init(void)
 {
 	DECLARE_GLOBAL_DATA_PTR;
 
-	gd->bd->bi_memstart = CFG_SDRAM_BASE;
-	gd->bd->bi_memsize = CFG_SDRAM_SIZE;
-	printf("DRAM:  %dMB\n", CFG_SDRAM_SIZE / (1024 * 1024));
+	gd->bd->bi_memstart = CONFIG_SYS_SDRAM_BASE;
+	gd->bd->bi_memsize = CONFIG_SYS_SDRAM_SIZE;
+	printf("DRAM:  %dMB\n", CONFIG_SYS_SDRAM_SIZE / (1024 * 1024));
 	return 0;
 }
 
diff --git a/board/ap325rxa/config.mk b/board/renesas/ap325rxa/config.mk
index b52a5e5cb..b52a5e5cb 100644
--- a/board/ap325rxa/config.mk
+++ b/board/renesas/ap325rxa/config.mk
diff --git a/board/ap325rxa/cpld-ap325rxa.c b/board/renesas/ap325rxa/cpld-ap325rxa.c
index 16fadcbca..16fadcbca 100644
--- a/board/ap325rxa/cpld-ap325rxa.c
+++ b/board/renesas/ap325rxa/cpld-ap325rxa.c
diff --git a/board/ap325rxa/lowlevel_init.S b/board/renesas/ap325rxa/lowlevel_init.S
index 4f6658879..4f6658879 100644
--- a/board/ap325rxa/lowlevel_init.S
+++ b/board/renesas/ap325rxa/lowlevel_init.S
diff --git a/board/ap325rxa/u-boot.lds b/board/renesas/ap325rxa/u-boot.lds
index a67037458..e9f8dc0de 100644
--- a/board/ap325rxa/u-boot.lds
+++ b/board/renesas/ap325rxa/u-boot.lds
@@ -49,9 +49,9 @@ SECTIONS
 	{
 		cpu/sh4/start.o		(.text)
 		. = ALIGN(8192);
-		common/environment.o	(.ppcenv)
+		common/env_embedded.o	(.ppcenv)
 		. = ALIGN(8192);
-		common/environment.o	(.ppcenvr)
+		common/env_embedded.o	(.ppcenvr)
 		. = ALIGN(8192);
 		*(.text)
 		. = ALIGN(4);
@@ -103,4 +103,3 @@ SECTIONS
 
 	PROVIDE (_end = .);
 }
-
diff --git a/board/r2dplus/Makefile b/board/renesas/r2dplus/Makefile
index e96a8aa98..e96a8aa98 100644
--- a/board/r2dplus/Makefile
+++ b/board/renesas/r2dplus/Makefile
diff --git a/board/r2dplus/config.mk b/board/renesas/r2dplus/config.mk
index 1ec7dcc60..1ec7dcc60 100644
--- a/board/r2dplus/config.mk
+++ b/board/renesas/r2dplus/config.mk
diff --git a/board/r2dplus/lowlevel_init.S b/board/renesas/r2dplus/lowlevel_init.S
index 5755de87b..28d2b3769 100644
--- a/board/r2dplus/lowlevel_init.S
+++ b/board/renesas/r2dplus/lowlevel_init.S
@@ -11,7 +11,7 @@
 
 	.global lowlevel_init
 	.text
-	.align  2
+	.align	2
 
 lowlevel_init:
 
@@ -21,7 +21,7 @@ lowlevel_init:
 
 	mov.l	MMUCR_A,r1
 	mov.l	MMUCR_D,r0
-	mov.w	r0,@r1
+	mov.l	r0,@r1
 
 	mov.l	BCR1_A,r1
 	mov.l	BCR1_D,r0
@@ -118,34 +118,34 @@ CCR_D_E:	.long	0x8000090B
 
 FRQCR_A:	.long	FRQCR		/* FRQCR Address */
 FRQCR_D:	.long	0x00000e0a	/* 03/07/15 modify */
-BCR1_A:	.long	BCR1		/* BCR1 Address */
-BCR1_D:	.long	0x00180008
-BCR2_A:	.long	BCR2		/* BCR2 Address */
-BCR2_D:	.long   0xabe8
-BCR3_A:	.long	BCR3		/* BCR3 Address */
-BCR3_D:	.long	0x0000
-BCR4_A:	.long	BCR4		/* BCR4 Address */
-BCR4_D:	.long	0x00000010
-WCR1_A:	.long	WCR1		/* WCR1 Address */
-WCR1_D:	.long	0x33343333
-WCR2_A:	.long	WCR2		/* WCR2 Address */
-WCR2_D:	.long	0xcff86fbf
-WCR3_A:	.long	WCR3		/* WCR3 Address */
-WCR3_D:	.long	0x07777707
+BCR1_A:		.long	BCR1		/* BCR1 Address */
+BCR1_D:		.long	0x00180008
+BCR2_A:		.long	BCR2		/* BCR2 Address */
+BCR2_D:		.long	0xabe8
+BCR3_A:		.long	BCR3		/* BCR3 Address */
+BCR3_D:		.long	0x0000
+BCR4_A:		.long	BCR4		/* BCR4 Address */
+BCR4_D:		.long	0x00000010
+WCR1_A:		.long	WCR1		/* WCR1 Address */
+WCR1_D:		.long	0x33343333
+WCR2_A:		.long	WCR2		/* WCR2 Address */
+WCR2_D:		.long	0xcff86fbf
+WCR3_A:		.long	WCR3		/* WCR3 Address */
+WCR3_D:		.long	0x07777707
 LED_A:		.long	0x04000036	/* LED Address */
 RTCNT_A:	.long	RTCNT		/* RTCNT Address */
 RTCNT_D:	.long	0xA500		/* RTCNT Write Code A5h Data 00h */
 RTCOR_A:	.long	RTCOR		/* RTCOR Address */
-RTCOR_D:	.long	0xA534		/* RTCOR Write Code  */
+RTCOR_D:	.long	0xA534		/* RTCOR Write Code */
 RTCSR_A:	.long	RTCSR		/* RTCSR Address */
 RTCSR_D:	.long	0xA510		/* RTCSR Write Code */
-SDMR3_A:	.long   0xFF9400CC	/* SDMR3 Address */
+SDMR3_A:	.long	0xFF9400CC	/* SDMR3 Address */
 SDMR3_D:	.long	0x55
 MCR_A:		.long	MCR		/* MCR Address */
-MCR_D1:	.long	0x081901F4	/* MRSET:'0' */
-MCR_D2:	.long	0x481901F4	/* MRSET:'1' */
-RFCR_A:	.long	RFCR		/* RFCR Address */
-RFCR_D:	.long	0xA400		/* RFCR Write Code A4h Data 00h */
+MCR_D1:		.long	0x081901F4	/* MRSET:'0' */
+MCR_D2:		.long	0x481901F4	/* MRSET:'1' */
+RFCR_A:		.long	RFCR		/* RFCR Address */
+RFCR_D:		.long	0xA400		/* RFCR Write Code A4h Data 00h */
 PCR_A:		.long	PCR		/* PCR Address */
 PCR_D:		.long	0x0000
 MMUCR_A:	.long	MMUCR		/* MMUCCR Address */
diff --git a/board/r2dplus/r2dplus.c b/board/renesas/r2dplus/r2dplus.c
index 8fb8ff667..0c08d6859 100644
--- a/board/r2dplus/r2dplus.c
+++ b/board/renesas/r2dplus/r2dplus.c
@@ -23,6 +23,7 @@
 
 #include <common.h>
 #include <ide.h>
+#include <netdev.h>
 #include <asm/processor.h>
 #include <asm/io.h>
 #include <asm/pci.h>
@@ -42,9 +43,9 @@ int dram_init(void)
 {
 	DECLARE_GLOBAL_DATA_PTR;
 
-	gd->bd->bi_memstart = CFG_SDRAM_BASE;
-	gd->bd->bi_memsize = CFG_SDRAM_SIZE;
-	printf("DRAM:  %dMB\n", CFG_SDRAM_SIZE / (1024 * 1024));
+	gd->bd->bi_memstart = CONFIG_SYS_SDRAM_BASE;
+	gd->bd->bi_memsize = CONFIG_SYS_SDRAM_SIZE;
+	printf("DRAM:  %dMB\n", CONFIG_SYS_SDRAM_SIZE / (1024 * 1024));
 	return 0;
 }
 
@@ -76,3 +77,8 @@ void pci_init_board(void)
 {
 	pci_sh7751_init(&hose);
 }
+
+int board_eth_init(bd_t *bis)
+{
+	return pci_eth_init(bis);
+}
diff --git a/board/r2dplus/u-boot.lds b/board/renesas/r2dplus/u-boot.lds
index 96d8d81ac..040e53017 100644
--- a/board/r2dplus/u-boot.lds
+++ b/board/renesas/r2dplus/u-boot.lds
@@ -49,9 +49,9 @@ SECTIONS
 	{
 		cpu/sh4/start.o		(.text)
 		. = ALIGN(8192);
-		common/environment.o	(.ppcenv)
+		common/env_embedded.o	(.ppcenv)
 		. = ALIGN(8192);
-		common/environment.o	(.ppcenvr)
+		common/env_embedded.o	(.ppcenvr)
 		. = ALIGN(8192);
 		*(.text)
 		. = ALIGN(4);
diff --git a/board/r7780mp/Makefile b/board/renesas/r7780mp/Makefile
index c100e7e2a..c100e7e2a 100644
--- a/board/r7780mp/Makefile
+++ b/board/renesas/r7780mp/Makefile
diff --git a/board/r7780mp/config.mk b/board/renesas/r7780mp/config.mk
index 6a045a15c..6a045a15c 100644
--- a/board/r7780mp/config.mk
+++ b/board/renesas/r7780mp/config.mk
diff --git a/board/r7780mp/lowlevel_init.S b/board/renesas/r7780mp/lowlevel_init.S
index 05c075b6c..ab0499a3a 100644
--- a/board/r7780mp/lowlevel_init.S
+++ b/board/renesas/r7780mp/lowlevel_init.S
@@ -325,8 +325,9 @@ repeat2:
 RWTCSR_D_1:				.word	0xA507
 RWTCSR_D_2:				.word	0xA507
 RWTCNT_D:				.word	0x5A00
+	.align	2
 
-BBG_PMMR_A:			.long	0xFF800010
+BBG_PMMR_A:				.long	0xFF800010
 BBG_PMSR1_A:			.long	0xFF800014
 BBG_PMSR2_A:			.long	0xFF800018
 BBG_PMSR3_A:			.long	0xFF80001C
diff --git a/board/r7780mp/r7780mp.c b/board/renesas/r7780mp/r7780mp.c
index 19c35d349..396e4b6db 100644
--- a/board/r7780mp/r7780mp.c
+++ b/board/renesas/r7780mp/r7780mp.c
@@ -23,6 +23,7 @@
 #include <asm/processor.h>
 #include <asm/io.h>
 #include <asm/pci.h>
+#include <netdev.h>
 #include "r7780mp.h"
 
 int checkboard(void)
@@ -47,9 +48,9 @@ int dram_init(void)
 {
 	DECLARE_GLOBAL_DATA_PTR;
 
-	gd->bd->bi_memstart = CFG_SDRAM_BASE;
-	gd->bd->bi_memsize = CFG_SDRAM_SIZE;
-	printf("DRAM:  %dMB\n", CFG_SDRAM_SIZE / (1024 * 1024));
+	gd->bd->bi_memstart = CONFIG_SYS_SDRAM_BASE;
+	gd->bd->bi_memsize = CONFIG_SYS_SDRAM_SIZE;
+	printf("DRAM:  %dMB\n", CONFIG_SYS_SDRAM_SIZE / (1024 * 1024));
 	return 0;
 }
 
@@ -77,3 +78,8 @@ void pci_init_board(void)
 {
 	pci_sh7780_init(&hose);
 }
+
+int board_eth_init(bd_t *bis)
+{
+	return pci_eth_init(bis);
+}
diff --git a/board/r7780mp/r7780mp.h b/board/renesas/r7780mp/r7780mp.h
index 476a41354..476a41354 100644
--- a/board/r7780mp/r7780mp.h
+++ b/board/renesas/r7780mp/r7780mp.h
diff --git a/board/r7780mp/u-boot.lds b/board/renesas/r7780mp/u-boot.lds
index e7499e5cd..eaa05d0d5 100644
--- a/board/r7780mp/u-boot.lds
+++ b/board/renesas/r7780mp/u-boot.lds
@@ -49,9 +49,9 @@ SECTIONS
 	{
 		cpu/sh4/start.o		(.text)
 		. = ALIGN(8192);
-		common/environment.o	(.ppcenv)
+		common/env_embedded.o	(.ppcenv)
 		. = ALIGN(8192);
-		common/environment.o	(.ppcenvr)
+		common/env_embedded.o	(.ppcenvr)
 		. = ALIGN(8192);
 		*(.text)
 		. = ALIGN(4);
diff --git a/board/rsk7203/Makefile b/board/renesas/rsk7203/Makefile
index 7365d1930..7365d1930 100644
--- a/board/rsk7203/Makefile
+++ b/board/renesas/rsk7203/Makefile
diff --git a/board/rsk7203/config.mk b/board/renesas/rsk7203/config.mk
index 61aa51f2b..61aa51f2b 100644
--- a/board/rsk7203/config.mk
+++ b/board/renesas/rsk7203/config.mk
diff --git a/board/rsk7203/lowlevel_init.S b/board/renesas/rsk7203/lowlevel_init.S
index e4d6f9e7d..e4d6f9e7d 100644
--- a/board/rsk7203/lowlevel_init.S
+++ b/board/renesas/rsk7203/lowlevel_init.S
diff --git a/board/rsk7203/rsk7203.c b/board/renesas/rsk7203/rsk7203.c
index beb943e85..2cbd45e04 100644
--- a/board/rsk7203/rsk7203.c
+++ b/board/renesas/rsk7203/rsk7203.c
@@ -39,12 +39,33 @@ int dram_init(void)
 {
 	DECLARE_GLOBAL_DATA_PTR;
 
-	gd->bd->bi_memstart = CFG_SDRAM_BASE;
-	gd->bd->bi_memsize = CFG_SDRAM_SIZE;
-	printf("DRAM:  %dMB\n", CFG_SDRAM_SIZE / (1024 * 1024));
+	gd->bd->bi_memstart = CONFIG_SYS_SDRAM_BASE;
+	gd->bd->bi_memsize = CONFIG_SYS_SDRAM_SIZE;
+	printf("DRAM:  %dMB\n", CONFIG_SYS_SDRAM_SIZE / (1024 * 1024));
 	return 0;
 }
 
 void led_set_state(unsigned short value)
 {
 }
+
+/*
+ * The RSK board has the SMSC9118 wired up 'incorrectly'.
+ * Byte-swapping is necessary, and so poor performance is inevitable.
+ * This problem cannot evade by the swap function of CHIP, this can
+ * evade by software Byte-swapping.
+ * And this has problem by FIFO access only. pkt_data_pull/pkt_data_push
+ * functions necessary to solve this problem.
+ */
+u32 pkt_data_pull(u32 addr)
+{
+	volatile u16 *addr_16 = (u16 *)addr;
+	return (u32)((swab16(*addr_16) << 16) & 0xFFFF0000)\
+				| swab16(*(addr_16 + 1));
+}
+
+void pkt_data_push(u32 addr, u32 val)
+{
+	*(volatile u16 *)(addr + 2) = swab16((u16)val);
+	*(volatile u16 *)(addr) = swab16((u16)(val >> 16));
+}
diff --git a/board/rsk7203/u-boot.lds b/board/renesas/rsk7203/u-boot.lds
index bf4433a23..63e5b9744 100644
--- a/board/rsk7203/u-boot.lds
+++ b/board/renesas/rsk7203/u-boot.lds
@@ -46,9 +46,9 @@ SECTIONS
 	{
 		cpu/sh2/start.o		(.text)
 		. = ALIGN(8192);
-		common/environment.o	(.ppcenv)
+		common/env_embedded.o	(.ppcenv)
 		. = ALIGN(8192);
-		common/environment.o	(.ppcenvr)
+		common/env_embedded.o	(.ppcenvr)
 		. = ALIGN(8192);
 		*(.text)
 		. = ALIGN(4);
diff --git a/board/sh7763rdp/Makefile b/board/renesas/sh7763rdp/Makefile
index 62a683d57..62a683d57 100644
--- a/board/sh7763rdp/Makefile
+++ b/board/renesas/sh7763rdp/Makefile
diff --git a/board/sh7763rdp/config.mk b/board/renesas/sh7763rdp/config.mk
index c52dbfd7b..c52dbfd7b 100644
--- a/board/sh7763rdp/config.mk
+++ b/board/renesas/sh7763rdp/config.mk
diff --git a/board/sh7763rdp/lowlevel_init.S b/board/renesas/sh7763rdp/lowlevel_init.S
index 2a44eee1a..2a44eee1a 100644
--- a/board/sh7763rdp/lowlevel_init.S
+++ b/board/renesas/sh7763rdp/lowlevel_init.S
diff --git a/board/sh7763rdp/sh7763rdp.c b/board/renesas/sh7763rdp/sh7763rdp.c
index 92ac7b7a9..88bab70e3 100644
--- a/board/sh7763rdp/sh7763rdp.c
+++ b/board/renesas/sh7763rdp/sh7763rdp.c
@@ -66,9 +66,9 @@ int dram_init(void)
 {
 	DECLARE_GLOBAL_DATA_PTR;
 
-	gd->bd->bi_memstart = CFG_SDRAM_BASE;
-	gd->bd->bi_memsize = CFG_SDRAM_SIZE;
-	printf("DRAM:  %dMB\n", CFG_SDRAM_SIZE / (1024 * 1024));
+	gd->bd->bi_memstart = CONFIG_SYS_SDRAM_BASE;
+	gd->bd->bi_memsize = CONFIG_SYS_SDRAM_SIZE;
+	printf("DRAM:  %dMB\n", CONFIG_SYS_SDRAM_SIZE / (1024 * 1024));
 	return 0;
 }
 
diff --git a/board/sh7763rdp/u-boot.lds b/board/renesas/sh7763rdp/u-boot.lds
index c07f0d80e..7177416c2 100644
--- a/board/sh7763rdp/u-boot.lds
+++ b/board/renesas/sh7763rdp/u-boot.lds
@@ -49,9 +49,9 @@ SECTIONS
 	{
 		cpu/sh4/start.o		(.text)
 		. = ALIGN(8192);
-		common/environment.o	(.ppcenv)
+		common/env_embedded.o	(.ppcenv)
 		. = ALIGN(8192);
-		common/environment.o	(.ppcenvr)
+		common/env_embedded.o	(.ppcenvr)
 		. = ALIGN(8192);
 		*(.text)
 		. = ALIGN(4);
diff --git a/board/sh7785lcr/Makefile b/board/renesas/sh7785lcr/Makefile
index b1b538c9d..b1b538c9d 100644
--- a/board/sh7785lcr/Makefile
+++ b/board/renesas/sh7785lcr/Makefile
diff --git a/board/sh7785lcr/config.mk b/board/renesas/sh7785lcr/config.mk
index 93761eec8..20807dfc5 100644
--- a/board/sh7785lcr/config.mk
+++ b/board/renesas/sh7785lcr/config.mk
@@ -23,4 +23,3 @@
 # NOTE: Must match value used in u-boot.lds (in this directory).
 #
 TEXT_BASE = 0x0ff80000
-
diff --git a/board/sh7785lcr/lowlevel_init.S b/board/renesas/sh7785lcr/lowlevel_init.S
index 8126296e5..50e1789cc 100644
--- a/board/sh7785lcr/lowlevel_init.S
+++ b/board/renesas/sh7785lcr/lowlevel_init.S
@@ -315,4 +315,3 @@ CS_I2C_WCR_D:	.long	0x00000003
 
 CCR_A:		.long	0xff00001c
 CCR_D:		.long	0x0000090b
-
diff --git a/board/sh7785lcr/rtl8169.h b/board/renesas/sh7785lcr/rtl8169.h
index d1c0d64b1..ca9c0bd94 100644
--- a/board/sh7785lcr/rtl8169.h
+++ b/board/renesas/sh7785lcr/rtl8169.h
@@ -55,4 +55,3 @@ const unsigned short EEPROM_W_Data_8169_B[] = {
 	0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
 	0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000
 };
-
diff --git a/board/sh7785lcr/rtl8169_mac.c b/board/renesas/sh7785lcr/rtl8169_mac.c
index 2bc873bd1..bf0ba145d 100644
--- a/board/sh7785lcr/rtl8169_mac.c
+++ b/board/renesas/sh7785lcr/rtl8169_mac.c
@@ -346,4 +346,3 @@ U_BOOT_CMD(
 	"\n"
 	"    - print MAC address for RTL8110\n"
 );
-
diff --git a/board/sh7785lcr/selfcheck.c b/board/renesas/sh7785lcr/selfcheck.c
index 9c228e5f6..ce0620f68 100644
--- a/board/sh7785lcr/selfcheck.c
+++ b/board/renesas/sh7785lcr/selfcheck.c
@@ -84,7 +84,7 @@ static void test_net(void)
 	if (data == 0x816910ec)
 		printf("Ethernet OK\n");
 	else
-		printf("Ethernet NG, data = %08x\n", data);
+		printf("Ethernet NG, data = %08x\n", (unsigned int)data);
 }
 
 static void test_sata(void)
@@ -96,7 +96,7 @@ static void test_sata(void)
 	if (data == 0x35121095)
 		printf("SATA OK\n");
 	else
-		printf("SATA NG, data = %08x\n", data);
+		printf("SATA NG, data = %08x\n", (unsigned int)data);
 }
 
 static void test_pci(void)
@@ -170,4 +170,3 @@ U_BOOT_CMD(
 	"hwtest sata  - check SiI3512 ID\n"
 	"hwtest pci   - output PCI slot device ID\n"
 );
-
diff --git a/board/sh7785lcr/sh7785lcr.c b/board/renesas/sh7785lcr/sh7785lcr.c
index 5b9c40374..786c758a9 100644
--- a/board/sh7785lcr/sh7785lcr.c
+++ b/board/renesas/sh7785lcr/sh7785lcr.c
@@ -21,6 +21,7 @@
 #include <asm/io.h>
 #include <asm/processor.h>
 #include <asm/pci.h>
+#include <netdev.h>
 
 int checkboard(void)
 {
@@ -37,9 +38,9 @@ int dram_init(void)
 {
 	DECLARE_GLOBAL_DATA_PTR;
 
-	gd->bd->bi_memstart = CFG_SDRAM_BASE;
-	gd->bd->bi_memsize = CFG_SDRAM_SIZE;
-	printf("DRAM:  %dMB\n", CFG_SDRAM_SIZE / (1024 * 1024));
+	gd->bd->bi_memstart = CONFIG_SYS_SDRAM_BASE;
+	gd->bd->bi_memsize = CONFIG_SYS_SDRAM_SIZE;
+	printf("DRAM:  %dMB\n", CONFIG_SYS_SDRAM_SIZE / (1024 * 1024));
 	return 0;
 }
 
@@ -49,3 +50,7 @@ void pci_init_board(void)
 	pci_sh7780_init(&hose);
 }
 
+int board_eth_init(bd_t *bis)
+{
+	return pci_eth_init(bis);
+}
diff --git a/board/sh7785lcr/u-boot.lds b/board/renesas/sh7785lcr/u-boot.lds
index f0109eb24..231769f3b 100644
--- a/board/sh7785lcr/u-boot.lds
+++ b/board/renesas/sh7785lcr/u-boot.lds
@@ -40,9 +40,9 @@ SECTIONS
 	{
 		cpu/sh4/start.o		(.text)
 		. = ALIGN(8192);
-		common/environment.o	(.ppcenv)
+		common/env_embedded.o	(.ppcenv)
 		. = ALIGN(8192);
-		common/environment.o	(.ppcenvr)
+		common/env_embedded.o	(.ppcenvr)
 		. = ALIGN(8192);
 		*(.text)
 		. = ALIGN(4);
@@ -94,4 +94,3 @@ SECTIONS
 
 	PROVIDE (_end = .);
 }
-
diff --git a/board/rmu/flash.c b/board/rmu/flash.c
index 0f2c327a1..a3ab851d2 100644
--- a/board/rmu/flash.c
+++ b/board/rmu/flash.c
@@ -26,7 +26,7 @@
 #include <common.h>
 #include <mpc8xx.h>
 
-flash_info_t	flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips	*/
+flash_info_t	flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips	*/
 
 /*-----------------------------------------------------------------------
  * Functions
@@ -40,13 +40,13 @@ static void flash_get_offsets (ulong base, flash_info_t *info);
 
 unsigned long flash_init (void)
 {
-	volatile immap_t     *immap  = (immap_t *)CFG_IMMR;
+	volatile immap_t     *immap  = (immap_t *)CONFIG_SYS_IMMR;
 	volatile memctl8xx_t *memctl = &immap->im_memctl;
 	unsigned long size_b0 ;
 	int i;
 
 	/* Init: no FLASHes known */
-	for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) {
+	for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
 		flash_info[i].flash_id = FLASH_UNKNOWN;
 	}
 
@@ -64,39 +64,39 @@ unsigned long flash_init (void)
 		memctl->memc_br0, memctl->memc_or0);
 
 	/* Remap FLASH according to real size */
-	memctl->memc_or0 = CFG_OR_TIMING_FLASH | (-size_b0 & 0xFFFF8000);
-	memctl->memc_br0 = (CFG_FLASH_BASE & BR_BA_MSK) | BR_MS_GPCM | BR_V;
+	memctl->memc_or0 = CONFIG_SYS_OR_TIMING_FLASH | (-size_b0 & 0xFFFF8000);
+	memctl->memc_br0 = (CONFIG_SYS_FLASH_BASE & BR_BA_MSK) | BR_MS_GPCM | BR_V;
 
 	debug ("## BR0: 0x%08x    OR0: 0x%08x\n",
 		memctl->memc_br0, memctl->memc_or0);
 
 	/* Re-do sizing to get full correct info */
 
-	size_b0 = flash_get_size((vu_long *)CFG_FLASH_BASE, &flash_info[0]);
-	flash_get_offsets (CFG_FLASH_BASE, &flash_info[0]);
+	size_b0 = flash_get_size((vu_long *)CONFIG_SYS_FLASH_BASE, &flash_info[0]);
+	flash_get_offsets (CONFIG_SYS_FLASH_BASE, &flash_info[0]);
 
 	/* monitor protection ON by default */
 	flash_protect(FLAG_PROTECT_SET,
-		      CFG_MONITOR_BASE,
-		      CFG_MONITOR_BASE+monitor_flash_len-1,
+		      CONFIG_SYS_MONITOR_BASE,
+		      CONFIG_SYS_MONITOR_BASE+monitor_flash_len-1,
 		      &flash_info[0]);
 
-#ifdef	CFG_ENV_IS_IN_FLASH
+#ifdef	CONFIG_ENV_IS_IN_FLASH
 	/* ENV protection ON by default */
 	flash_protect(FLAG_PROTECT_SET,
-		      CFG_ENV_ADDR,
-		      CFG_ENV_ADDR+CFG_ENV_SIZE-1,
+		      CONFIG_ENV_ADDR,
+		      CONFIG_ENV_ADDR+CONFIG_ENV_SIZE-1,
 		      &flash_info[0]);
 #endif
 
-#if defined(CFG_ENV_ADDR_REDUND) || defined(CFG_ENV_OFFSET_REDUND)
+#if defined(CONFIG_ENV_ADDR_REDUND) || defined(CONFIG_ENV_OFFSET_REDUND)
 	debug ("Protect redundand environment: %08lx ... %08lx\n",
-		(ulong)CFG_ENV_ADDR_REDUND,
-		(ulong)CFG_ENV_ADDR_REDUND + CFG_ENV_SIZE - 1);
+		(ulong)CONFIG_ENV_ADDR_REDUND,
+		(ulong)CONFIG_ENV_ADDR_REDUND + CONFIG_ENV_SIZE - 1);
 
 	flash_protect(FLAG_PROTECT_SET,
-		      CFG_ENV_ADDR_REDUND,
-		      CFG_ENV_ADDR_REDUND + CFG_ENV_SIZE_REDUND - 1,
+		      CONFIG_ENV_ADDR_REDUND,
+		      CONFIG_ENV_ADDR_REDUND + CONFIG_ENV_SIZE_REDUND - 1,
 		      &flash_info[0]);
 #endif
 
@@ -406,7 +406,7 @@ int	flash_erase (flash_info_t *info, int s_first, int s_last)
 	last  = start;
 	addr = (vu_long *)(info->start[l_sect]);
 	while ((addr[0] & 0x80808080) != 0x80808080) {
-		if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+		if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
 			printf ("Timeout\n");
 			return 1;
 		}
@@ -529,7 +529,7 @@ static int write_word (flash_info_t *info, ulong dest, ulong data)
 	/* data polling for D7 */
 	start = get_timer (0);
 	while ((*((vu_long *)dest) & 0x80808080) != (data & 0x80808080)) {
-		if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+		if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
 			return (1);
 		}
 	}
diff --git a/board/rmu/rmu.c b/board/rmu/rmu.c
index e22dc5258..cd02b9c6e 100644
--- a/board/rmu/rmu.c
+++ b/board/rmu/rmu.c
@@ -94,7 +94,7 @@ int checkboard (void)
 
 phys_size_t initdram (int board_type)
 {
-	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
 	volatile memctl8xx_t *memctl = &immap->im_memctl;
 	long int size9;
 
@@ -102,15 +102,15 @@ phys_size_t initdram (int board_type)
 		   sizeof (sdram_table) / sizeof (uint));
 
 	/* Refresh clock prescalar */
-	memctl->memc_mptpr = CFG_MPTPR;
+	memctl->memc_mptpr = CONFIG_SYS_MPTPR;
 
 	memctl->memc_mar = 0x00000088;
 
 	/* Map controller banks 1 to the SDRAM bank */
-	memctl->memc_or1 = CFG_OR1_PRELIM;
-	memctl->memc_br1 = CFG_BR1_PRELIM;
+	memctl->memc_or1 = CONFIG_SYS_OR1_PRELIM;
+	memctl->memc_br1 = CONFIG_SYS_BR1_PRELIM;
 
-	memctl->memc_mamr = CFG_MAMR_9COL & (~(MAMR_PTAE));	/* no refresh yet */
+	memctl->memc_mamr = CONFIG_SYS_MAMR_9COL & (~(MAMR_PTAE));	/* no refresh yet */
 
 	udelay (200);
 
@@ -127,14 +127,14 @@ phys_size_t initdram (int board_type)
 	 * 9 column mode
 	 */
 
-	size9 = dram_size (CFG_MAMR_9COL, (long *) SDRAM_BASE_PRELIM,
+	size9 = dram_size (CONFIG_SYS_MAMR_9COL, (long *) SDRAM_BASE_PRELIM,
 			   SDRAM_MAX_SIZE);
 
 	/*
 	 * Final mapping:
 	 */
 
-	memctl->memc_or1 = ((-size9) & 0xFFFF0000) | CFG_OR_TIMING_SDRAM;
+	memctl->memc_or1 = ((-size9) & 0xFFFF0000) | CONFIG_SYS_OR_TIMING_SDRAM;
 	udelay (1000);
 
 	return (size9);
@@ -153,7 +153,7 @@ phys_size_t initdram (int board_type)
 static long int dram_size (long int mamr_value, long int *base,
 			   long int maxsize)
 {
-	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
 	volatile memctl8xx_t *memctl = &immap->im_memctl;
 
 	memctl->memc_mamr = mamr_value;
diff --git a/board/rmu/u-boot.lds b/board/rmu/u-boot.lds
index 1f9a191d4..55cb5eca3 100644
--- a/board/rmu/u-boot.lds
+++ b/board/rmu/u-boot.lds
@@ -64,7 +64,7 @@ SECTIONS
 /* XXX ?
     . = env_offset;
 */
-    common/environment.o(.text)
+    common/env_embedded.o(.text)
 
     *(.text)
     *(.fixup)
@@ -135,6 +135,7 @@ SECTIONS
    *(.dynbss)
    *(.bss)
    *(COMMON)
+   . = ALIGN(4);
   }
   _end = . ;
   PROVIDE (end = .);
diff --git a/board/rmu/u-boot.lds.debug b/board/rmu/u-boot.lds.debug
index 0cd053a8b..016048dae 100644
--- a/board/rmu/u-boot.lds.debug
+++ b/board/rmu/u-boot.lds.debug
@@ -61,7 +61,7 @@ SECTIONS
     lib_generic/crc32.o		(.text)
 
     . = env_offset;
-    common/environment.o(.text)
+    common/env_embedded.o(.text)
 
     *(.text)
     *(.fixup)
diff --git a/board/rpxsuper/flash.c b/board/rpxsuper/flash.c
index d80e77862..be29b65cf 100644
--- a/board/rpxsuper/flash.c
+++ b/board/rpxsuper/flash.c
@@ -33,7 +33,7 @@
 #include <mpc8xx.h>
 #include <asm/io.h>
 
-flash_info_t flash_info[CFG_MAX_FLASH_BANKS];
+flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];
 
 #define RD_SWP32(x) in_le32((volatile u32*)x)
 
@@ -53,35 +53,35 @@ unsigned long flash_init (void)
     int i;
 
     /* Init: no FLASHes known */
-    for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) {
+    for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
 	flash_info[i].flash_id = FLASH_UNKNOWN;
     }
 
     /* for now, only support the 4 MB Flash SIMM */
-    size = flash_get_size((vu_long *)CFG_FLASH0_BASE, &flash_info[0]);
+    size = flash_get_size((vu_long *)CONFIG_SYS_FLASH0_BASE, &flash_info[0]);
 
     /*
      * protect monitor and environment sectors
      */
 
-#if CFG_MONITOR_BASE >= CFG_FLASH0_BASE
+#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH0_BASE
     flash_protect(FLAG_PROTECT_SET,
-		  CFG_MONITOR_BASE,
-		  CFG_MONITOR_BASE+monitor_flash_len-1,
+		  CONFIG_SYS_MONITOR_BASE,
+		  CONFIG_SYS_MONITOR_BASE+monitor_flash_len-1,
 		  &flash_info[0]);
 #endif
 
-#if (CFG_ENV_IS_IN_FLASH == 1) && defined(CFG_ENV_ADDR)
-# ifndef  CFG_ENV_SIZE
-#  define CFG_ENV_SIZE	CFG_ENV_SECT_SIZE
+#if defined(CONFIG_ENV_IS_IN_FLASH) && defined(CONFIG_ENV_ADDR)
+# ifndef  CONFIG_ENV_SIZE
+#  define CONFIG_ENV_SIZE	CONFIG_ENV_SECT_SIZE
 # endif
     flash_protect(FLAG_PROTECT_SET,
-		  CFG_ENV_ADDR,
-		  CFG_ENV_ADDR + CFG_ENV_SIZE - 1,
+		  CONFIG_ENV_ADDR,
+		  CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1,
 		  &flash_info[0]);
 #endif
 
-    return /*size*/ (CFG_FLASH0_SIZE * 1024 * 1024);
+    return /*size*/ (CONFIG_SYS_FLASH0_SIZE * 1024 * 1024);
 }
 
 /*-----------------------------------------------------------------------
@@ -292,7 +292,7 @@ int flash_erase (flash_info_t *info, int s_first, int s_last)
     addr = (vu_long*)(info->start[l_sect]);
     while (	(addr[0] & 0x80808080) != 0x80808080 ||
 		(addr[1] & 0x80808080) != 0x80808080) {
-	if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+	if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
 	    printf ("Timeout\n");
 	    return 1;
 	}
@@ -423,7 +423,7 @@ static int write_word (flash_info_t *info, ulong dest, ulong data)
     /* data polling for D7 */
     start = get_timer (0);
     while ((*((vu_long *)dest) & 0x80808080) != (data & 0x80808080)) {
-	if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+	if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
 	    return (1);
 	}
     }
diff --git a/board/rpxsuper/mii_phy.c b/board/rpxsuper/mii_phy.c
index ef99affff..12e23f487 100644
--- a/board/rpxsuper/mii_phy.c
+++ b/board/rpxsuper/mii_phy.c
@@ -54,7 +54,7 @@ mii_phy_read(unsigned short reg)
 {
     int i;
     unsigned short tmp, val = 0, adr = 0;
-    t_rpx_regs *regs = (t_rpx_regs*)CFG_REGS_BASE;
+    t_rpx_regs *regs = (t_rpx_regs*)CONFIG_SYS_REGS_BASE;
 
     tmp = 0x6002 | (adr << 7) | (reg << 2);
     regs->bcsr4 = 0xC3;
@@ -83,7 +83,7 @@ mii_phy_write(unsigned short reg, unsigned short val)
 {
     int i;
     unsigned short tmp, adr = 0;
-    t_rpx_regs *regs = (t_rpx_regs*)CFG_REGS_BASE;
+    t_rpx_regs *regs = (t_rpx_regs*)CONFIG_SYS_REGS_BASE;
 
     tmp = 0x5002 | (adr << 7) | (reg << 2);
     regs->bcsr4 = 0xC3;
diff --git a/board/rpxsuper/rpxsuper.c b/board/rpxsuper/rpxsuper.c
index f633c5c47..aa59803de 100644
--- a/board/rpxsuper/rpxsuper.c
+++ b/board/rpxsuper/rpxsuper.c
@@ -193,11 +193,11 @@ const iop_conf_t iop_conf_tab[4][32] = {
 */
 int board_early_init_f (void)
 {
-    volatile t_rpx_regs *regs = (t_rpx_regs*)CFG_REGS_BASE;
-    volatile immap_t *immap  = (immap_t *)CFG_IMMR;
+    volatile t_rpx_regs *regs = (t_rpx_regs*)CONFIG_SYS_REGS_BASE;
+    volatile immap_t *immap  = (immap_t *)CONFIG_SYS_IMMR;
     volatile memctl8260_t *memctl = &immap->im_memctl;
-    memctl->memc_br4 = CFG_BR4_PRELIM;
-    memctl->memc_or4 = CFG_OR4_PRELIM;
+    memctl->memc_br4 = CONFIG_SYS_BR4_PRELIM;
+    memctl->memc_or4 = CONFIG_SYS_OR4_PRELIM;
     regs->bcsr1 = 0x70; /* to enable terminal no SMC1 */
     regs->bcsr2 = 0x20;	/* mut be written to enable writing FLASH */
     return 0;
@@ -206,7 +206,7 @@ int board_early_init_f (void)
 void
 reset_phy(void)
 {
-    volatile t_rpx_regs *regs = (t_rpx_regs*)CFG_REGS_BASE;
+    volatile t_rpx_regs *regs = (t_rpx_regs*)CONFIG_SYS_REGS_BASE;
     regs->bcsr4 = 0xC3;
 }
 
@@ -216,7 +216,7 @@ reset_phy(void)
 
 int checkboard(void)
 {
-    volatile t_rpx_regs *regs = (t_rpx_regs*)CFG_REGS_BASE;
+    volatile t_rpx_regs *regs = (t_rpx_regs*)CONFIG_SYS_REGS_BASE;
     printf ("Board: Embedded Planet RPX Super, Revision %d\n",
 	regs->bcsr0 >> 4);
 
@@ -227,15 +227,15 @@ int checkboard(void)
 
 phys_size_t initdram(int board_type)
 {
-    volatile immap_t *immap  = (immap_t *)CFG_IMMR;
+    volatile immap_t *immap  = (immap_t *)CONFIG_SYS_IMMR;
     volatile memctl8260_t *memctl = &immap->im_memctl;
     volatile uchar c = 0, *ramaddr;
     ulong psdmr, lsdmr, bcr;
     long size = 0;
     int i;
 
-    psdmr = CFG_PSDMR;
-    lsdmr = CFG_LSDMR;
+    psdmr = CONFIG_SYS_PSDMR;
+    lsdmr = CONFIG_SYS_LSDMR;
 
     /*
      * Quote from 8260 UM (10.4.2 SDRAM Power-On Initialization, 10-35):
@@ -254,17 +254,17 @@ phys_size_t initdram(int board_type)
      *  accessing the SDRAM with a single-byte transaction."
      *
      * The appropriate BRx/ORx registers have already been set when we
-     * get here. The SDRAM can be accessed at the address CFG_SDRAM_BASE.
+     * get here. The SDRAM can be accessed at the address CONFIG_SYS_SDRAM_BASE.
      */
 
-    size = CFG_SDRAM0_SIZE;
+    size = CONFIG_SYS_SDRAM0_SIZE;
     bcr = immap->im_siu_conf.sc_bcr;
     immap->im_siu_conf.sc_bcr = (bcr & ~BCR_EBM);
 
-    memctl->memc_mptpr = CFG_MPTPR;
+    memctl->memc_mptpr = CONFIG_SYS_MPTPR;
 
-    ramaddr = (uchar *)(CFG_SDRAM0_BASE);
-    memctl->memc_psrt = CFG_PSRT;
+    ramaddr = (uchar *)(CONFIG_SYS_SDRAM0_BASE);
+    memctl->memc_psrt = CONFIG_SYS_PSRT;
 
     memctl->memc_psdmr = psdmr | PSDMR_OP_PREA;
     *ramaddr = c;
@@ -281,10 +281,10 @@ phys_size_t initdram(int board_type)
 
     immap->im_siu_conf.sc_bcr = bcr;
 
-#ifndef CFG_RAMBOOT
-/*    size += CFG_SDRAM1_SIZE; */
-    ramaddr = (uchar *)(CFG_SDRAM1_BASE);
-    memctl->memc_lsrt = CFG_LSRT;
+#ifndef CONFIG_SYS_RAMBOOT
+/*    size += CONFIG_SYS_SDRAM1_SIZE; */
+    ramaddr = (uchar *)(CONFIG_SYS_SDRAM1_BASE);
+    memctl->memc_lsrt = CONFIG_SYS_LSRT;
 
     memctl->memc_lsdmr = lsdmr | PSDMR_OP_PREA;
     *ramaddr = c;
diff --git a/board/rsdproto/flash.c b/board/rsdproto/flash.c
index 4e43b2966..e99c2a6f6 100644
--- a/board/rsdproto/flash.c
+++ b/board/rsdproto/flash.c
@@ -41,7 +41,7 @@
  */
 #undef WITH_AUTOSELECT
 
-flash_info_t	flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips	*/
+flash_info_t	flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips	*/
 
 #if 1
 #define D(x)
@@ -94,7 +94,7 @@ unsigned long flash_init (void)
 #endif
 
     /* Init: no FLASHes known */
-    for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) {
+    for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
 		flash_info[i].flash_id = FLASH_UNKNOWN;
     }
 
@@ -120,28 +120,28 @@ unsigned long flash_init (void)
 	 * protect monitor and environment sectors
 	 */
 
-#if CFG_MONITOR_BASE >= PHYS_FLASH
+#if CONFIG_SYS_MONITOR_BASE >= PHYS_FLASH
 	flash_protect(FLAG_PROTECT_SET,
-		      CFG_MONITOR_BASE,
-		      CFG_MONITOR_BASE+monitor_flash_len-1,
+		      CONFIG_SYS_MONITOR_BASE,
+		      CONFIG_SYS_MONITOR_BASE+monitor_flash_len-1,
 		      &flash_info[0]);
 	flash_protect(FLAG_PROTECT_SET,
-		      CFG_MONITOR_BASE,
-		      CFG_MONITOR_BASE+monitor_flash_len-1,
+		      CONFIG_SYS_MONITOR_BASE,
+		      CONFIG_SYS_MONITOR_BASE+monitor_flash_len-1,
 		      &flash_info[1]);
 #endif
 
-#if (CFG_ENV_IS_IN_FLASH == 1) && defined(CFG_ENV_ADDR)
-# ifndef  CFG_ENV_SIZE
-#  define CFG_ENV_SIZE	CFG_ENV_SECT_SIZE
+#if defined(CONFIG_ENV_IS_IN_FLASH) && defined(CONFIG_ENV_ADDR)
+# ifndef  CONFIG_ENV_SIZE
+#  define CONFIG_ENV_SIZE	CONFIG_ENV_SECT_SIZE
 # endif
 	flash_protect(FLAG_PROTECT_SET,
-		      CFG_ENV_ADDR,
-		      CFG_ENV_ADDR + CFG_ENV_SIZE - 1,
+		      CONFIG_ENV_ADDR,
+		      CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1,
 		      &flash_info[0]);
 	flash_protect(FLAG_PROTECT_SET,
-		      CFG_ENV_ADDR,
-		      CFG_ENV_ADDR + CFG_ENV_SIZE - 1,
+		      CONFIG_ENV_ADDR,
+		      CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1,
 		      &flash_info[1]);
 #endif
 
@@ -259,7 +259,7 @@ int	flash_erase (flash_info_t *info, int s_first, int s_last)
 	start = get_timer (0);
 	do
 	{
-		if (get_timer(start) > CFG_FLASH_ERASE_TOUT)
+		if (get_timer(start) > CONFIG_SYS_FLASH_ERASE_TOUT)
 		{	/* write reset command, command address is unimportant */
 			/* this command turns the flash back to read mode     */
 			f_addr =
@@ -387,7 +387,7 @@ static unsigned char write_ull(flash_info_t *info,
 	start = get_timer (0);
 	do
 	{
-		if (get_timer(start) > CFG_FLASH_WRITE_TOUT)
+		if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT)
 		{
 			/* write reset command, command address is unimportant */
 			/* this command turns the flash back to read mode     */
diff --git a/board/rsdproto/rsdproto.c b/board/rsdproto/rsdproto.c
index eeec3b4dc..26edb2e4f 100644
--- a/board/rsdproto/rsdproto.c
+++ b/board/rsdproto/rsdproto.c
@@ -253,7 +253,7 @@ int checkboard (void)
 	puts ("Board: Rohde & Schwarz 8260 Protocol Board\n");
 
 	/* initialise i2c */
-	i2c_init (CFG_I2C_SPEED, CFG_I2C_SLAVE);
+	i2c_init (CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
 
 	read_RS5C372_time (&timedate);
 	printf ("  Time:  %02d:%02d:%02d\n",
@@ -284,7 +284,7 @@ int misc_init_f (void)
 
 phys_size_t initdram (int board_type)
 {
-	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
 	volatile memctl8260_t *memctl = &immap->im_memctl;
 
 #ifdef INIT_LOCAL_BUS_SDRAM
@@ -317,7 +317,7 @@ phys_size_t initdram (int board_type)
 		 *
 		 * The appropriate BRx/ORx registers have already
 		 * been set when we get here (see cpu_init_f). The
-		 * SDRAM can be accessed at the address CFG_SDRAM_BASE.
+		 * SDRAM can be accessed at the address CONFIG_SYS_SDRAM_BASE.
 		 */
 		memctl->memc_mptpr = 0x2000;
 		memctl->memc_mar = 0x0200;
@@ -330,7 +330,7 @@ phys_size_t initdram (int board_type)
 		memctl->memc_lsrt = 0x0b;
 		memctl->memc_lurt = 0x00;
 		ramaddr = (uchar *) PHYS_SDRAM_LOCAL;
-		sdmr = CFG_LSDMR & ~(PSDMR_OP_MSK | PSDMR_RFEN | PSDMR_PBI);
+		sdmr = CONFIG_SYS_LSDMR & ~(PSDMR_OP_MSK | PSDMR_RFEN | PSDMR_PBI);
 		memctl->memc_lsdmr = sdmr | PSDMR_OP_PREA;
 		*ramaddr = 0xff;
 		for (i = 0; i < 8; i++) {
@@ -339,13 +339,13 @@ phys_size_t initdram (int board_type)
 		}
 		memctl->memc_lsdmr = sdmr | PSDMR_OP_MRW;
 		*ramaddr = 0xff;
-		memctl->memc_lsdmr = CFG_LSDMR | PSDMR_OP_NORM;
+		memctl->memc_lsdmr = CONFIG_SYS_LSDMR | PSDMR_OP_NORM;
 #endif
 		/* initialise 60x bus ram */
 		memctl->memc_psrt = 0x0b;
 		memctl->memc_purt = 0x08;
 		ramaddr32 = (ulong *) PHYS_SDRAM_60X;
-		sdmr = CFG_PSDMR & ~(PSDMR_OP_MSK | PSDMR_RFEN | PSDMR_PBI);
+		sdmr = CONFIG_SYS_PSDMR & ~(PSDMR_OP_MSK | PSDMR_RFEN | PSDMR_PBI);
 		memctl->memc_psdmr = sdmr | PSDMR_OP_PREA;
 		ramaddr32[0] = 0x00ff00ff;
 		ramaddr32[1] = 0x00ff00ff;
diff --git a/board/rsdproto/u-boot.lds b/board/rsdproto/u-boot.lds
index 07a7277c8..b2bd57641 100644
--- a/board/rsdproto/u-boot.lds
+++ b/board/rsdproto/u-boot.lds
@@ -123,6 +123,7 @@ SECTIONS
    *(.dynbss)
    *(.bss)
    *(COMMON)
+   . = ALIGN(4);
   }
   _end = . ;
   PROVIDE (end = .);
diff --git a/board/sacsng/clkinit.c b/board/sacsng/clkinit.c
index edb775df2..4a7f362c5 100644
--- a/board/sacsng/clkinit.c
+++ b/board/sacsng/clkinit.c
@@ -37,7 +37,7 @@ int Daq64xSampling = 0;
 
 void Daq_BRG_Reset(uint brg)
 {
-     volatile immap_t *immr = (immap_t *)CFG_IMMR;
+     volatile immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
      volatile uint *brg_ptr;
 
      brg_ptr = (uint *)&immr->im_brgc1;
@@ -53,7 +53,7 @@ void Daq_BRG_Reset(uint brg)
 
 void Daq_BRG_Disable(uint brg)
 {
-     volatile immap_t *immr = (immap_t *)CFG_IMMR;
+     volatile immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
      volatile uint *brg_ptr;
 
      brg_ptr = (uint *)&immr->im_brgc1;
@@ -68,7 +68,7 @@ void Daq_BRG_Disable(uint brg)
 
 void Daq_BRG_Enable(uint brg)
 {
-     volatile immap_t *immr = (immap_t *)CFG_IMMR;
+     volatile immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
      volatile uint *brg_ptr;
 
      brg_ptr = (uint *)&immr->im_brgc1;
@@ -82,7 +82,7 @@ void Daq_BRG_Enable(uint brg)
 
 uint Daq_BRG_Get_Div16(uint brg)
 {
-     volatile immap_t *immr = (immap_t *)CFG_IMMR;
+     volatile immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
      uint *brg_ptr;
 
      brg_ptr = (uint *)&immr->im_brgc1;
@@ -104,7 +104,7 @@ uint Daq_BRG_Get_Div16(uint brg)
 
 void Daq_BRG_Set_Div16(uint brg, uint div16)
 {
-     volatile immap_t *immr = (immap_t *)CFG_IMMR;
+     volatile immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
      uint *brg_ptr;
 
      brg_ptr = (uint *)&immr->im_brgc1;
@@ -126,7 +126,7 @@ void Daq_BRG_Set_Div16(uint brg, uint div16)
 
 uint Daq_BRG_Get_Count(uint brg)
 {
-     volatile immap_t *immr = (immap_t *)CFG_IMMR;
+     volatile immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
      uint *brg_ptr;
      uint brg_cnt;
 
@@ -153,7 +153,7 @@ uint Daq_BRG_Get_Count(uint brg)
 
 void Daq_BRG_Set_Count(uint brg, uint brg_cnt)
 {
-     volatile immap_t *immr = (immap_t *)CFG_IMMR;
+     volatile immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
      uint *brg_ptr;
 
      brg_ptr = (uint *)&immr->im_brgc1;
@@ -183,7 +183,7 @@ void Daq_BRG_Set_Count(uint brg, uint brg_cnt)
 
 uint Daq_BRG_Get_ExtClk(uint brg)
 {
-     volatile immap_t *immr = (immap_t *)CFG_IMMR;
+     volatile immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
      uint *brg_ptr;
 
      brg_ptr = (uint *)&immr->im_brgc1;
@@ -243,7 +243,7 @@ char* Daq_BRG_Get_ExtClk_Description(uint brg)
 
 void Daq_BRG_Set_ExtClk(uint brg, uint extc)
 {
-     volatile immap_t *immr = (immap_t *)CFG_IMMR;
+     volatile immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
      uint *brg_ptr;
 
      brg_ptr = (uint *)&immr->im_brgc1;
@@ -259,7 +259,7 @@ void Daq_BRG_Set_ExtClk(uint brg, uint extc)
 
 uint Daq_BRG_Rate(uint brg)
 {
-     volatile immap_t *immr = (immap_t *)CFG_IMMR;
+     volatile immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
      uint *brg_ptr;
      uint brg_cnt;
      uint brg_freq = 0;
@@ -296,7 +296,7 @@ uint Daq_Get_SampleRate(void)
 
 void Daq_Init_Clocks(int sample_rate, int sample_64x)
 {
-    volatile ioport_t *iopa = ioport_addr((immap_t *)CFG_IMMR, 0 /* port A */);
+    volatile ioport_t *iopa = ioport_addr((immap_t *)CONFIG_SYS_IMMR, 0 /* port A */);
     uint mclk_divisor; /* MCLK divisor */
     int  flag;         /* Interrupt state */
 
@@ -378,7 +378,7 @@ void Daq_Stop_Clocks(void)
 
 {
 #ifdef TIGHTEN_UP_BRG_TIMING
-    volatile immap_t *immr = (immap_t *)CFG_IMMR;
+    volatile immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
     register uint mclk_brg;       /* MCLK  BRG value */
     register uint sclk_brg;       /* SCLK  BRG value */
     register uint lrclk_brg;      /* LRCLK BRG value */
@@ -663,7 +663,7 @@ void Daq_Start_Clocks(int sample_rate)
 
 {
 #ifdef TIGHTEN_UP_BRG_TIMING
-    volatile immap_t *immr = (immap_t *)CFG_IMMR;
+    volatile immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
 
     register uint mclk_brg;       /* MCLK  BRG value */
     register uint sclk_brg;       /* SCLK  BRG value */
@@ -914,7 +914,7 @@ void Daq_Start_Clocks(int sample_rate)
 void Daq_Display_Clocks(void)
 
 {
-    volatile immap_t *immr = (immap_t *)CFG_IMMR;
+    volatile immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
     uint mclk_divisor; /* Detected MCLK divisor */
     uint sclk_divisor; /* Detected SCLK divisor */
 
diff --git a/board/sacsng/flash.c b/board/sacsng/flash.c
index 52e01def5..8b30f50cc 100644
--- a/board/sacsng/flash.c
+++ b/board/sacsng/flash.c
@@ -27,15 +27,15 @@
 
 #undef  DEBUG
 
-#ifndef	CFG_ENV_ADDR
-#define CFG_ENV_ADDR	(CFG_FLASH_BASE + CFG_ENV_OFFSET)
+#ifndef	CONFIG_ENV_ADDR
+#define CONFIG_ENV_ADDR	(CONFIG_SYS_FLASH_BASE + CONFIG_ENV_OFFSET)
 #endif
-#ifndef CFG_ENV_SIZE
-#define CFG_ENV_SIZE	CFG_ENV_SECT_SIZE
+#ifndef CONFIG_ENV_SIZE
+#define CONFIG_ENV_SIZE	CONFIG_ENV_SECT_SIZE
 #endif
 
 
-flash_info_t	flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips	*/
+flash_info_t	flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips	*/
 
 /*-----------------------------------------------------------------------
  * Functions
@@ -52,49 +52,49 @@ unsigned long flash_init (void)
 	int i;
 
 	/* Init: no FLASHes known */
-	for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) {
+	for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
 		flash_info[i].flash_id = FLASH_UNKNOWN;
 	}
 
-	size_b0 = flash_get_size((vu_short *)CFG_FLASH0_BASE, &flash_info[0]);
+	size_b0 = flash_get_size((vu_short *)CONFIG_SYS_FLASH0_BASE, &flash_info[0]);
 
 	if (flash_info[0].flash_id == FLASH_UNKNOWN) {
 		printf ("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n",
 			size_b0, size_b0<<20);
 	}
 
-	size_b1 = flash_get_size((vu_short *)CFG_FLASH1_BASE, &flash_info[1]);
+	size_b1 = flash_get_size((vu_short *)CONFIG_SYS_FLASH1_BASE, &flash_info[1]);
 
-#if CFG_MONITOR_BASE >= CFG_FLASH_BASE
+#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE
 	/* monitor protection ON by default */
 	flash_protect(FLAG_PROTECT_SET,
-		      CFG_MONITOR_BASE,
-		      CFG_MONITOR_BASE+monitor_flash_len-1,
+		      CONFIG_SYS_MONITOR_BASE,
+		      CONFIG_SYS_MONITOR_BASE+monitor_flash_len-1,
 		      &flash_info[0]);
 #endif
 
-#ifdef	CFG_ENV_IS_IN_FLASH
+#ifdef	CONFIG_ENV_IS_IN_FLASH
 	/* ENV protection ON by default */
 	flash_protect(FLAG_PROTECT_SET,
-		      CFG_ENV_ADDR,
-		      CFG_ENV_ADDR+CFG_ENV_SIZE-1,
+		      CONFIG_ENV_ADDR,
+		      CONFIG_ENV_ADDR+CONFIG_ENV_SIZE-1,
 		      &flash_info[0]);
 #endif
 
 	if (size_b1) {
-#if CFG_MONITOR_BASE >= CFG_FLASH_BASE
+#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE
 		/* monitor protection ON by default */
 		flash_protect(FLAG_PROTECT_SET,
-			      CFG_MONITOR_BASE,
-			      CFG_MONITOR_BASE+monitor_flash_len-1,
+			      CONFIG_SYS_MONITOR_BASE,
+			      CONFIG_SYS_MONITOR_BASE+monitor_flash_len-1,
 			      &flash_info[1]);
 #endif
 
-#ifdef	CFG_ENV_IS_IN_FLASH
+#ifdef	CONFIG_ENV_IS_IN_FLASH
 		/* ENV protection ON by default */
 		flash_protect(FLAG_PROTECT_SET,
-			      CFG_ENV_ADDR,
-			      CFG_ENV_ADDR+CFG_ENV_SIZE-1,
+			      CONFIG_ENV_ADDR,
+			      CONFIG_ENV_ADDR+CONFIG_ENV_SIZE-1,
 			      &flash_info[1]);
 #endif
 	} else {
@@ -247,7 +247,7 @@ static ulong flash_get_size (vu_short *addr, flash_info_t *info)
 	} else {
 #ifdef DEBUG
 		printf("Unknown flash type 0x%04X\n", value);
-		info->size = CFG_FLASH_SIZE;
+		info->size = CONFIG_SYS_FLASH_SIZE;
 #else
 		info->flash_id = FLASH_UNKNOWN;
 		return (0);			/* => no or unknown flash */
@@ -374,7 +374,7 @@ int	flash_erase (flash_info_t *info, int s_first, int s_last)
 	last  = start;
 	addr = (vu_short*)(info->start[l_sect]);
 	while ((addr[0] & 0x0080) != 0x0080) {
-		if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+		if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
 			printf ("Timeout\n");
 			addr[0] = 0xF0F0;	/* reset bank */
 			__asm__ __volatile__(" sync\n ");
@@ -509,7 +509,7 @@ static int write_word (flash_info_t *info, ulong dest, ulong data)
 		/* data polling for D7 */
 		start = get_timer (0);
 		while (*(vu_short *)dest != (ushort)data) {
-			if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+			if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
 				return (1);
 			}
 		}
diff --git a/board/sacsng/sacsng.c b/board/sacsng/sacsng.c
index c00f14ee6..2513937ed 100644
--- a/board/sacsng/sacsng.c
+++ b/board/sacsng/sacsng.c
@@ -161,16 +161,16 @@ int checkboard(void)
 
 phys_size_t initdram(int board_type)
 {
-    volatile immap_t *immap  = (immap_t *)CFG_IMMR;
+    volatile immap_t *immap  = (immap_t *)CONFIG_SYS_IMMR;
     volatile memctl8260_t *memctl = &immap->im_memctl;
     volatile uchar c = 0;
-    volatile uchar *ramaddr = (uchar *)(CFG_SDRAM_BASE + 0x8);
-    uint  psdmr = CFG_PSDMR;
+    volatile uchar *ramaddr = (uchar *)(CONFIG_SYS_SDRAM_BASE + 0x8);
+    uint  psdmr = CONFIG_SYS_PSDMR;
     int   i;
     uint   psrt = 14;					/* for no SPD */
     uint   chipselects = 1;				/* for no SPD */
-    uint   sdram_size = CFG_SDRAM0_SIZE * 1024 * 1024;	/* for no SPD */
-    uint   or = CFG_OR2_PRELIM;				/* for no SPD */
+    uint   sdram_size = CONFIG_SYS_SDRAM0_SIZE * 1024 * 1024;	/* for no SPD */
+    uint   or = CONFIG_SYS_OR2_PRELIM;				/* for no SPD */
 #ifdef SDRAM_SPD_ADDR
     uint   data_width;
     uint   rows;
@@ -383,10 +383,10 @@ phys_size_t initdram(int board_type)
      *  accessing the SDRAM with a single-byte transaction."
      *
      * The appropriate BRx/ORx registers have already been set when we
-     * get here. The SDRAM can be accessed at the address CFG_SDRAM_BASE.
+     * get here. The SDRAM can be accessed at the address CONFIG_SYS_SDRAM_BASE.
      */
 
-    memctl->memc_mptpr = CFG_MPTPR;
+    memctl->memc_mptpr = CONFIG_SYS_MPTPR;
     memctl->memc_psrt  = psrt;
 
     memctl->memc_psdmr = psdmr | PSDMR_OP_PREA;
@@ -409,7 +409,7 @@ phys_size_t initdram(int board_type)
     if(chipselects > 1) {
 	ramaddr += sdram_size;
 
-	memctl->memc_br3 = CFG_BR3_PRELIM + sdram_size;
+	memctl->memc_br3 = CONFIG_SYS_BR3_PRELIM + sdram_size;
 	memctl->memc_or3 = or;
 
 	memctl->memc_psdmr = psdmr | PSDMR_OP_PREA;
@@ -446,8 +446,8 @@ int misc_init_r(void)
     /*
      * Note: iop is used by the I2C macros, and iopa by the ADC/DAC initialization.
      */
-    volatile ioport_t *iopa = ioport_addr((immap_t *)CFG_IMMR, 0 /* port A */);
-    volatile ioport_t *iop  = ioport_addr((immap_t *)CFG_IMMR, I2C_PORT);
+    volatile ioport_t *iopa = ioport_addr((immap_t *)CONFIG_SYS_IMMR, 0 /* port A */);
+    volatile ioport_t *iop  = ioport_addr((immap_t *)CONFIG_SYS_IMMR, I2C_PORT);
 
     int  reg;          /* I2C register value */
     char *ep;          /* Environment pointer */
@@ -854,14 +854,14 @@ int spi_cs_is_valid(unsigned int bus, unsigned int cs)
 
 void spi_cs_activate(struct spi_slave *slave)
 {
-    volatile ioport_t *iopd = ioport_addr((immap_t *)CFG_IMMR, 3 /* port D */);
+    volatile ioport_t *iopd = ioport_addr((immap_t *)CONFIG_SYS_IMMR, 3 /* port D */);
 
     iopd->pdat &= ~cs_mask[slave->cs];
 }
 
 void spi_cs_deactivate(struct spi_slave *slave)
 {
-    volatile ioport_t *iopd = ioport_addr((immap_t *)CFG_IMMR, 3 /* port D */);
+    volatile ioport_t *iopd = ioport_addr((immap_t *)CONFIG_SYS_IMMR, 3 /* port D */);
 
     iopd->pdat |= cs_mask[slave->cs];
 }
diff --git a/board/samsung/smdk6400/lowlevel_init.S b/board/samsung/smdk6400/lowlevel_init.S
index 034c810f7..e0119a771 100644
--- a/board/samsung/smdk6400/lowlevel_init.S
+++ b/board/samsung/smdk6400/lowlevel_init.S
@@ -2,7 +2,7 @@
  * Memory Setup stuff - taken from blob memsetup.S
  *
  * Copyright (C) 1999 2000 2001 Erik Mouw (J.A.K.Mouw@its.tudelft.nl) and
- *                     Jan-Derk Bakker (J.D.Bakker@its.tudelft.nl)
+ *		       Jan-Derk Bakker (J.D.Bakker@its.tudelft.nl)
  *
  * Modified for the Samsung SMDK2410 by
  * (C) Copyright 2002
@@ -73,8 +73,8 @@ lowlevel_init:
 	ldr	r1, [r0]
 	str	r1, [r0]
 
-	ldr	r0, =ELFIN_VIC0_BASE_ADDR 	@0x71200000
-	ldr	r1, =ELFIN_VIC1_BASE_ADDR 	@0x71300000
+	ldr	r0, =ELFIN_VIC0_BASE_ADDR	@0x71200000
+	ldr	r1, =ELFIN_VIC1_BASE_ADDR	@0x71300000
 
 	/* Disable all interrupts (VIC0 and VIC1) */
 	mvn	r3, #0x0
@@ -107,11 +107,11 @@ lowlevel_init:
 	bl	mem_ctrl_asm_init
 
 /* Wakeup support. Don't know if it's going to be used, untested. */
-        ldr     r0, =(ELFIN_CLOCK_POWER_BASE + RST_STAT_OFFSET)
-        ldr     r1, [r0]
-        bic     r1, r1, #0xfffffff7
-        cmp     r1, #0x8
-        beq     wakeup_reset
+	ldr	r0, =(ELFIN_CLOCK_POWER_BASE + RST_STAT_OFFSET)
+	ldr	r1, [r0]
+	bic	r1, r1, #0xfffffff7
+	cmp	r1, #0x8
+	beq	wakeup_reset
 
 1:
 	mov	lr, r12
@@ -124,10 +124,10 @@ wakeup_reset:
 	ldr	r1, [r0]
 	str	r1, [r0]
 
-        /* LED test */
-        ldr     r0, =ELFIN_GPIO_BASE
-        ldr     r1, =0x3000
-        str     r1, [r0, #GPNDAT_OFFSET]
+	/* LED test */
+	ldr	r0, =ELFIN_GPIO_BASE
+	ldr	r1, =0x3000
+	str	r1, [r0, #GPNDAT_OFFSET]
 
 	/* Load return address and jump to kernel */
 	ldr	r0, =(ELFIN_CLOCK_POWER_BASE + INF_REG0_OFFSET)
@@ -201,7 +201,7 @@ wait_for_async:
 	str	r1, [r0, #MPLL_LOCK_OFFSET]
 
 	/* Set Clock Divider */
-	ldr   	r1, [r0, #CLK_DIV0_OFFSET]
+	ldr	r1, [r0, #CLK_DIV0_OFFSET]
 	bic	r1, r1, #0x30000
 	bic	r1, r1, #0xff00
 	bic	r1, r1, #0xff
@@ -252,7 +252,7 @@ uart_asm_init:
 	/* set GPIO to enable UART */
 	ldr	r0, =ELFIN_GPIO_BASE
 	ldr	r1, =0x220022
-	str   	r1, [r0, #GPACON_OFFSET]
+	str	r1, [r0, #GPACON_OFFSET]
 	mov	pc, lr
 #endif
 
@@ -265,11 +265,11 @@ nand_asm_init:
 	ldr	r1, [r0, #NFCONF_OFFSET]
 	orr	r1, r1, #0x70
 	orr	r1, r1, #0x7700
-	str     r1, [r0, #NFCONF_OFFSET]
+	str	r1, [r0, #NFCONF_OFFSET]
 
 	ldr	r1, [r0, #NFCONT_OFFSET]
 	orr	r1, r1, #0x07
-	str     r1, [r0, #NFCONT_OFFSET]
+	str	r1, [r0, #NFCONT_OFFSET]
 
 	mov	pc, lr
 #endif
diff --git a/board/samsung/smdk6400/smdk6400.c b/board/samsung/smdk6400/smdk6400.c
index 77fd2c8a2..bd2e45ac2 100644
--- a/board/samsung/smdk6400/smdk6400.c
+++ b/board/samsung/smdk6400/smdk6400.c
@@ -107,12 +107,12 @@ ulong virt_to_phy_smdk6400(ulong addr)
 }
 #endif
 
-#if defined(CONFIG_CMD_NAND) && defined(CFG_NAND_LEGACY)
+#if defined(CONFIG_CMD_NAND) && defined(CONFIG_SYS_NAND_LEGACY)
 #include <linux/mtd/nand.h>
-extern struct nand_chip nand_dev_desc[CFG_MAX_NAND_DEVICE];
+extern struct nand_chip nand_dev_desc[CONFIG_SYS_MAX_NAND_DEVICE];
 void nand_init(void)
 {
-	nand_probe(CFG_NAND_BASE);
+	nand_probe(CONFIG_SYS_NAND_BASE);
 	if (nand_dev_desc[0].ChipID != NAND_ChipID_UNKNOWN)
 		print_size(nand_dev_desc[0].totlen, "\n");
 }
diff --git a/board/samsung/smdk6400/u-boot-nand.lds b/board/samsung/smdk6400/u-boot-nand.lds
index 132ab21ff..bd6b24f95 100644
--- a/board/samsung/smdk6400/u-boot-nand.lds
+++ b/board/samsung/smdk6400/u-boot-nand.lds
@@ -57,6 +57,6 @@ SECTIONS
 
 	. = ALIGN(4);
 	__bss_start = .;
-	.bss : { *(.bss) }
+	.bss : { *(.bss) . = ALIGN(4); }
 	_end = .;
 }
diff --git a/board/sandburst/common/flash.c b/board/sandburst/common/flash.c
index 762fb738f..dd712e3a3 100644
--- a/board/sandburst/common/flash.c
+++ b/board/sandburst/common/flash.c
@@ -41,9 +41,9 @@
 #endif /* DEBUG */
 
 
-flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips	*/
+flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips	*/
 
-static unsigned long flash_addr_table[8][CFG_MAX_FLASH_BANKS] = {
+static unsigned long flash_addr_table[8][CONFIG_SYS_MAX_FLASH_BANKS] = {
 	{0xfff80000}	/* Boot Flash */
 };
 
@@ -65,7 +65,7 @@ static int write_word (flash_info_t *info, ulong dest, ulong data);
 unsigned long flash_init (void)
 {
 	unsigned long total_b = 0;
-	unsigned long size_b[CFG_MAX_FLASH_BANKS];
+	unsigned long size_b[CONFIG_SYS_MAX_FLASH_BANKS];
 	unsigned short index = 0;
 	int i;
 
@@ -74,7 +74,7 @@ unsigned long flash_init (void)
 	DEBUGF("FLASH: Index: %d\n", index);
 
 	/* Init: no FLASHes known */
-	for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) {
+	for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
 		flash_info[i].flash_id = FLASH_UNKNOWN;
 		flash_info[i].sector_count = -1;
 		flash_info[i].size = 0;
@@ -284,7 +284,7 @@ int wait_for_DQ7(flash_info_t *info, int sect)
 	start = get_timer (0);
 	last  = start;
 	while ((addr[0] & (FLASH_WORD_SIZE)0x00800080) != (FLASH_WORD_SIZE)0x00800080) {
-		if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+		if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
 			printf ("Timeout\n");
 			return -1;
 		}
@@ -502,7 +502,7 @@ static int write_word (flash_info_t * info, ulong dest, ulong data)
 		while ((dest2[i] & (FLASH_WORD_SIZE) 0x00800080) !=
 		       (data2[i] & (FLASH_WORD_SIZE) 0x00800080)) {
 
-			if (get_timer (start) > CFG_FLASH_WRITE_TOUT) {
+			if (get_timer (start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
 				return (1);
 			}
 		}
diff --git a/board/sandburst/common/ppc440gx_i2c.c b/board/sandburst/common/ppc440gx_i2c.c
index 1e3dffb1e..9af6b8d88 100644
--- a/board/sandburst/common/ppc440gx_i2c.c
+++ b/board/sandburst/common/ppc440gx_i2c.c
@@ -43,8 +43,8 @@
 #define IIC_NOK_TOUT	6		/* Transfer timeout */
 
 #define IIC_TIMEOUT 1			/* 1 second */
-#if defined(CFG_I2C_NOPROBES)
-static uchar i2c_no_probes[] = CFG_I2C_NOPROBES;
+#if defined(CONFIG_SYS_I2C_NOPROBES)
+static uchar i2c_no_probes[] = CONFIG_SYS_I2C_NOPROBES;
 #endif
 
 static void _i2c_bus1_reset (void)
@@ -105,7 +105,7 @@ void i2c1_init (int speed, int slaveadd)
 	unsigned long freqOPB;
 	int val, divisor;
 
-#ifdef CFG_I2C_INIT_BOARD
+#ifdef CONFIG_SYS_I2C_INIT_BOARD
 	/* call board specific i2c bus reset routine before accessing the   */
 	/* environment, which might be in a chip on that bus. For details   */
 	/* about this problem see doc/I2C_Edge_Conditions.                  */
@@ -384,7 +384,7 @@ int i2c_read1 (uchar chip, uint addr, int alen, uchar * buffer, int len)
 	}
 
 
-#ifdef CFG_I2C_EEPROM_ADDR_OVERFLOW
+#ifdef CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW
 	/*
 	 * EEPROM chips that implement "address overflow" are ones
 	 * like Catalyst 24WC04/08/16 which has 9/10/11 bits of
@@ -397,7 +397,7 @@ int i2c_read1 (uchar chip, uint addr, int alen, uchar * buffer, int len)
 	 * hidden in the chip address.
 	 */
 	if( alen > 0 )
-		chip |= ((addr >> (alen * 8)) & CFG_I2C_EEPROM_ADDR_OVERFLOW);
+		chip |= ((addr >> (alen * 8)) & CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW);
 #endif
 	if( (ret = i2c_transfer1( 1, chip<<1, &xaddr[4-alen], alen, buffer, len )) != 0) {
 		printf( "I2c read: failed %d\n", ret);
@@ -422,7 +422,7 @@ int i2c_write1 (uchar chip, uint addr, int alen, uchar * buffer, int len)
 		xaddr[3] = addr & 0xFF;
 	}
 
-#ifdef CFG_I2C_EEPROM_ADDR_OVERFLOW
+#ifdef CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW
 	/*
 	 * EEPROM chips that implement "address overflow" are ones
 	 * like Catalyst 24WC04/08/16 which has 9/10/11 bits of
@@ -435,7 +435,7 @@ int i2c_write1 (uchar chip, uint addr, int alen, uchar * buffer, int len)
 	 * hidden in the chip address.
 	 */
 	if( alen > 0 )
-		chip |= ((addr >> (alen * 8)) & CFG_I2C_EEPROM_ADDR_OVERFLOW);
+		chip |= ((addr >> (alen * 8)) & CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW);
 #endif
 
 	return (i2c_transfer1( 0, chip<<1, &xaddr[4-alen], alen, buffer, len ) != 0);
@@ -465,13 +465,13 @@ void i2c_reg_write1(uchar i2c_addr, uchar reg, uchar val)
 int do_i2c1_probe(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 {
 	int j;
-#if defined(CFG_I2C_NOPROBES)
+#if defined(CONFIG_SYS_I2C_NOPROBES)
 	int k, skip;
 #endif
 
 	puts ("Valid chip addresses:");
 	for(j = 0; j < 128; j++) {
-#if defined(CFG_I2C_NOPROBES)
+#if defined(CONFIG_SYS_I2C_NOPROBES)
 		skip = 0;
 		for (k = 0; k < sizeof(i2c_no_probes); k++){
 			if (j == i2c_no_probes[k]){
@@ -488,7 +488,7 @@ int do_i2c1_probe(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 	}
 	putc ('\n');
 
-#if defined(CFG_I2C_NOPROBES)
+#if defined(CONFIG_SYS_I2C_NOPROBES)
 	puts ("Excluded chip addresses:");
 	for( k = 0; k < sizeof(i2c_no_probes); k++ )
 		printf(" %02X", i2c_no_probes[k] );
diff --git a/board/sandburst/common/ppc440gx_i2c.h b/board/sandburst/common/ppc440gx_i2c.h
index 10000f5ba..328abd64b 100644
--- a/board/sandburst/common/ppc440gx_i2c.h
+++ b/board/sandburst/common/ppc440gx_i2c.h
@@ -32,7 +32,7 @@
 
 #ifdef CONFIG_HARD_I2C
 
-#define I2C_BUS1_BASE_ADDR (CFG_PERIPHERAL_BASE + 0x00000500)
+#define I2C_BUS1_BASE_ADDR (CONFIG_SYS_PERIPHERAL_BASE + 0x00000500)
 #define	   I2C_REGISTERS_BUS1_BASE_ADDRESS I2C_BUS1_BASE_ADDR
 #define    IIC_MDBUF1	(I2C_REGISTERS_BUS1_BASE_ADDRESS+IICMDBUF)
 #define    IIC_SDBUF1	(I2C_REGISTERS_BUS1_BASE_ADDRESS+IICSDBUF)
diff --git a/board/sandburst/common/sb_common.c b/board/sandburst/common/sb_common.c
index 51b1c7514..f6ea16f0a 100644
--- a/board/sandburst/common/sb_common.c
+++ b/board/sandburst/common/sb_common.c
@@ -43,7 +43,7 @@ int sbcommon_get_master(void)
 {
 	ppc440_gpio_regs_t *gpio_regs;
 
-	gpio_regs = (ppc440_gpio_regs_t *)CFG_GPIO_BASE;
+	gpio_regs = (ppc440_gpio_regs_t *)CONFIG_SYS_GPIO_BASE;
 
 	if (gpio_regs->in & SBCOMMON_GPIO_PRI_N) {
 		return 0;
@@ -63,7 +63,7 @@ int sbcommon_secondary_present(void)
 {
 	ppc440_gpio_regs_t *gpio_regs;
 
-	gpio_regs = (ppc440_gpio_regs_t *)CFG_GPIO_BASE;
+	gpio_regs = (ppc440_gpio_regs_t *)CONFIG_SYS_GPIO_BASE;
 
 	if (gpio_regs->in & SBCOMMON_GPIO_SEC_PRES)
 		return 0;
@@ -84,7 +84,7 @@ unsigned short sbcommon_get_serial_number(void)
 
 	/* Get the board serial number from eeprom */
 	/* Initialize I2C */
-	i2c_init (CFG_I2C_SPEED, CFG_I2C_SLAVE);
+	i2c_init (CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
 
 	/* Read 256 bytes in EEPROM */
 	i2c_read (0x50, 0, 1, buff, 0x100);
@@ -218,11 +218,11 @@ phys_size_t initdram (int board_type)
  *
  *
  ************************************************************************/
-#if defined(CFG_DRAM_TEST)
+#if defined(CONFIG_SYS_DRAM_TEST)
 int testdram (void)
 {
-	uint *pstart = (uint *) CFG_MEMTEST_START;
-	uint *pend = (uint *) CFG_MEMTEST_END;
+	uint *pstart = (uint *) CONFIG_SYS_MEMTEST_START;
+	uint *pend = (uint *) CONFIG_SYS_MEMTEST_END;
 	uint *p;
 
 	printf("Testing SDRAM: ");
@@ -340,7 +340,7 @@ int pci_pre_init(struct pci_controller * hose )
  *	may not be sufficient for a given board.
  *
  ************************************************************************/
-#if defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT)
+#if defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT)
 void pci_target_init(struct pci_controller * hose )
 {
 	/*--------------------------------------------------------------------------+
@@ -355,7 +355,7 @@ void pci_target_init(struct pci_controller * hose )
 	 * Map all of SDRAM to PCI address 0x0000_0000. Note that the 440 strapping
 	 * options to not support sizes such as 128/256 MB.
 	 *--------------------------------------------------------------------------*/
-	out32r( PCIX0_PIM0LAL, CFG_SDRAM_BASE );
+	out32r( PCIX0_PIM0LAL, CONFIG_SYS_SDRAM_BASE );
 	out32r( PCIX0_PIM0LAH, 0 );
 	out32r( PCIX0_PIM0SA, ~(gd->ram_size - 1) | 1 );
 
@@ -364,12 +364,12 @@ void pci_target_init(struct pci_controller * hose )
 	/*--------------------------------------------------------------------------+
 	 * Program the board's subsystem id/vendor id
 	 *--------------------------------------------------------------------------*/
-	out16r( PCIX0_SBSYSVID, CFG_PCI_SUBSYS_VENDORID );
-	out16r( PCIX0_SBSYSID, CFG_PCI_SUBSYS_DEVICEID );
+	out16r( PCIX0_SBSYSVID, CONFIG_SYS_PCI_SUBSYS_VENDORID );
+	out16r( PCIX0_SBSYSID, CONFIG_SYS_PCI_SUBSYS_DEVICEID );
 
 	out16r( PCIX0_CMD, in16r(PCIX0_CMD) | PCI_COMMAND_MEMORY );
 }
-#endif /* defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT) */
+#endif /* defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT) */
 
 
 /*************************************************************************
@@ -405,7 +405,7 @@ void board_get_enetaddr (uchar * enet)
 	if (0 == macaddr_idx) {
 
 		/* Initialize I2C */
-		i2c_init (CFG_I2C_SPEED, CFG_I2C_SLAVE);
+		i2c_init (CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
 
 		/* Read 256 bytes in EEPROM */
 		i2c_read (0x50, 0, 1, buff, 0x100);
diff --git a/board/sandburst/karef/config.mk b/board/sandburst/karef/config.mk
index 65c1e4865..f2f94c5f6 100644
--- a/board/sandburst/karef/config.mk
+++ b/board/sandburst/karef/config.mk
@@ -39,5 +39,5 @@ PLATFORM_CPPFLAGS += -DDEBUG
 endif
 
 ifeq ($(dbcr),1)
-PLATFORM_CPPFLAGS += -DCFG_INIT_DBCR=0x8cff0000
+PLATFORM_CPPFLAGS += -DCONFIG_SYS_INIT_DBCR=0x8cff0000
 endif
diff --git a/board/sandburst/karef/init.S b/board/sandburst/karef/init.S
index b1d47a4c7..3198dfdfa 100644
--- a/board/sandburst/karef/init.S
+++ b/board/sandburst/karef/init.S
@@ -90,12 +90,12 @@
 tlbtab:
 	tlbtab_start
 	tlbentry( 0xf0000000, SZ_256M, 0xf0000000, 1, AC_R|AC_W|AC_X|SA_G|SA_I)
-	tlbentry( CFG_PERIPHERAL_BASE, SZ_256M, 0x40000000, 1, AC_R|AC_W|SA_G|SA_I)
-	tlbentry( CFG_ISRAM_BASE, SZ_256K, 0x80000000, 0, AC_R|AC_W|AC_X|SA_G|SA_I)
-	tlbentry( CFG_SDRAM_BASE, SZ_256M, 0x00000000, 0, AC_R|AC_W|AC_X|SA_G|SA_I )
-	tlbentry( CFG_SDRAM_BASE+0x10000000, SZ_256M, 0x10000000, 0, AC_R|AC_W|AC_X|SA_G|SA_I )
-	tlbentry( CFG_SDRAM_BASE+0x20000000, SZ_256M, 0x20000000, 0, AC_R|AC_W|AC_X|SA_G|SA_I )
-	tlbentry( CFG_SDRAM_BASE+0x30000000, SZ_256M, 0x30000000, 0, AC_R|AC_W|AC_X|SA_G|SA_I )
-	tlbentry( CFG_PCI_BASE, SZ_256M, 0x00000000, 2, AC_R|AC_W|SA_G|SA_I )
-	tlbentry( CFG_PCI_MEMBASE, SZ_256M, 0x00000000, 3, AC_R|AC_W|SA_G|SA_I )
+	tlbentry( CONFIG_SYS_PERIPHERAL_BASE, SZ_256M, 0x40000000, 1, AC_R|AC_W|SA_G|SA_I)
+	tlbentry( CONFIG_SYS_ISRAM_BASE, SZ_256K, 0x80000000, 0, AC_R|AC_W|AC_X|SA_G|SA_I)
+	tlbentry( CONFIG_SYS_SDRAM_BASE, SZ_256M, 0x00000000, 0, AC_R|AC_W|AC_X|SA_G|SA_I )
+	tlbentry( CONFIG_SYS_SDRAM_BASE+0x10000000, SZ_256M, 0x10000000, 0, AC_R|AC_W|AC_X|SA_G|SA_I )
+	tlbentry( CONFIG_SYS_SDRAM_BASE+0x20000000, SZ_256M, 0x20000000, 0, AC_R|AC_W|AC_X|SA_G|SA_I )
+	tlbentry( CONFIG_SYS_SDRAM_BASE+0x30000000, SZ_256M, 0x30000000, 0, AC_R|AC_W|AC_X|SA_G|SA_I )
+	tlbentry( CONFIG_SYS_PCI_BASE, SZ_256M, 0x00000000, 2, AC_R|AC_W|SA_G|SA_I )
+	tlbentry( CONFIG_SYS_PCI_MEMBASE, SZ_256M, 0x00000000, 3, AC_R|AC_W|SA_G|SA_I )
 	tlbtab_end
diff --git a/board/sandburst/karef/karef.c b/board/sandburst/karef/karef.c
index 72ce97635..8d97a9c35 100644
--- a/board/sandburst/karef/karef.c
+++ b/board/sandburst/karef/karef.c
@@ -26,6 +26,7 @@
 #include <command.h>
 #include "karef.h"
 #include "karef_version.h"
+#include <timestamp.h>
 #include <asm/processor.h>
 #include <asm/io.h>
 #include <spd_sdram.h>
@@ -65,7 +66,7 @@ int board_early_init_f (void)
 	mtsdr(sdr_pfc0, 0x00103E00);
 
 	/* Setup access for LEDs, and system topology info */
-	gpio_regs = (ppc440_gpio_regs_t *)CFG_GPIO_BASE;
+	gpio_regs = (ppc440_gpio_regs_t *)CONFIG_SYS_GPIO_BASE;
 	gpio_regs->open_drain = SBCOMMON_GPIO_SYS_LEDS;
 	gpio_regs->tri_state  = SBCOMMON_GPIO_DBGLEDS;
 
@@ -93,7 +94,7 @@ int board_early_init_f (void)
 	      EBC_BXAP_RE_DISABLED  | EBC_BXAP_BEM_WRITEONLY |
 	      EBC_BXAP_PEN_DISABLED);
 
-	mtebc(pb0cr, EBC_BXCR_BAS_ENCODE(CFG_FLASH_BASE) |
+	mtebc(pb0cr, EBC_BXCR_BAS_ENCODE(CONFIG_SYS_FLASH_BASE) |
 	      EBC_BXCR_BS_1MB | EBC_BXCR_BU_RW | EBC_BXCR_BW_8BIT);
 	/*--------------------------------------------------------------------+
 	  | 8KB NVRAM/RTC. Initialize bank 1 with default values.
@@ -259,8 +260,8 @@ int checkboard (void)
 	KAREF_FPGA_REGS_ST *karef_ps;
 	OFEM_FPGA_REGS_ST *ofem_ps;
 
-	karef_ps = (KAREF_FPGA_REGS_ST *)CFG_KAREF_FPGA_BASE;
-	ofem_ps = (OFEM_FPGA_REGS_ST *)CFG_OFEM_FPGA_BASE;
+	karef_ps = (KAREF_FPGA_REGS_ST *)CONFIG_SYS_KAREF_FPGA_BASE;
+	ofem_ps = (OFEM_FPGA_REGS_ST *)CONFIG_SYS_OFEM_FPGA_BASE;
 
 	scan_id = (unsigned char)((karef_ps->revision_ul &
 				   SAND_HAL_KA_SC_SCAN_REVISION_IDENTIFICATION_MASK)
@@ -299,7 +300,7 @@ int checkboard (void)
 		"Serial Number: %d\n", sernum);
 	printf ("%s\n", KAREF_U_BOOT_REL_STR);
 
-	printf ("Built %s %s by %s\n", __DATE__, __TIME__, BUILDUSER);
+	printf ("Built %s %s by %s\n", U_BOOT_DATE, U_BOOT_TIME, BUILDUSER);
 	if (sbcommon_get_master()) {
 		printf("Slot 0 - Master\nSlave board");
 		if (sbcommon_secondary_present())
@@ -319,7 +320,7 @@ int checkboard (void)
 
 	/* Fix the ack in the bme 32 */
 	udelay(5000);
-	out32(CFG_BME32_BASE + 0x0000000C, 0x00000001);
+	out32(CONFIG_SYS_BME32_BASE + 0x0000000C, 0x00000001);
 	asm("eieio");
 
 
@@ -335,7 +336,7 @@ int misc_init_f (void)
 {
 	/* Turn on i2c bus 1 */
 	puts ("I2C1:  ");
-	i2c1_init (CFG_I2C_SPEED, CFG_I2C_SLAVE);
+	i2c1_init (CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
 	puts ("ready\n");
 
 	/* Turn on fans 3 & 4 */
@@ -366,7 +367,8 @@ int misc_init_r (void)
 	setenv("ubrelver", KAREF_U_BOOT_REL_STR);
 
 	memset(envstr, 0, 255);
-	sprintf (envstr, "Built %s %s by %s", __DATE__, __TIME__, BUILDUSER);
+	sprintf (envstr, "Built %s %s by %s",
+		 U_BOOT_DATE, U_BOOT_TIME, BUILDUSER);
 	setenv("bldstr", envstr);
 	saveenv();
 
@@ -397,8 +399,8 @@ int misc_init_r (void)
 	}
 
 	if( getenv("fakeled")) {
-		karef_ps = (KAREF_FPGA_REGS_ST *)CFG_KAREF_FPGA_BASE;
-		ofem_ps = (OFEM_FPGA_REGS_ST *)CFG_OFEM_FPGA_BASE;
+		karef_ps = (KAREF_FPGA_REGS_ST *)CONFIG_SYS_KAREF_FPGA_BASE;
+		ofem_ps = (OFEM_FPGA_REGS_ST *)CONFIG_SYS_OFEM_FPGA_BASE;
 		ofem_ps->control_ul &= ~SAND_HAL_KA_SC_SCAN_CNTL_FAULT_LED_MASK;
 		karef_ps->control_ul &= ~SAND_HAL_KA_OF_OFEM_CNTL_FAULT_LED_MASK;
 		setenv("bootdelay", "-1");
@@ -417,7 +419,7 @@ void ide_set_reset(int on)
 {
 	KAREF_FPGA_REGS_ST *karef_ps;
 	/* TODO: ide reset */
-	karef_ps = (KAREF_FPGA_REGS_ST *)CFG_KAREF_FPGA_BASE;
+	karef_ps = (KAREF_FPGA_REGS_ST *)CONFIG_SYS_KAREF_FPGA_BASE;
 
 	if (on) {
 		karef_ps->reset_ul &= ~SAND_HAL_KA_SC_SCAN_RESET_CF_RESET_N_MASK;
@@ -440,7 +442,7 @@ void fpga_init(void)
 	/* Ensure we have power all around */
 	udelay(500);
 
-	karef_ps = (KAREF_FPGA_REGS_ST *)CFG_KAREF_FPGA_BASE;
+	karef_ps = (KAREF_FPGA_REGS_ST *)CONFIG_SYS_KAREF_FPGA_BASE;
 	tmp =
 		SAND_HAL_KA_SC_SCAN_RESET_CF_RESET_N_MASK |
 		SAND_HAL_KA_SC_SCAN_RESET_BME_RESET_N_MASK |
@@ -470,7 +472,7 @@ void fpga_init(void)
 			SAND_HAL_KA_OF_OFEM_RESET_LOCH0_RESET_N_MASK |
 			SAND_HAL_KA_OF_OFEM_RESET_MAC0_RESET_N_MASK;
 
-		ofem_ps = (OFEM_FPGA_REGS_ST *)CFG_OFEM_FPGA_BASE;
+		ofem_ps = (OFEM_FPGA_REGS_ST *)CONFIG_SYS_OFEM_FPGA_BASE;
 		ofem_ps->reset_ul = tmp;
 
 		ofem_ps->control_ul |= 1 < SAND_HAL_KA_OF_OFEM_CNTL_FAULT_LED_SHIFT;
diff --git a/board/sandburst/karef/u-boot.lds b/board/sandburst/karef/u-boot.lds
index 216f9c64d..6223f4e8d 100644
--- a/board/sandburst/karef/u-boot.lds
+++ b/board/sandburst/karef/u-boot.lds
@@ -74,14 +74,14 @@ SECTIONS
     cpu/ppc4xx/4xx_uart.o	(.text)
     cpu/ppc4xx/cpu_init.o	(.text)
     cpu/ppc4xx/speed.o	(.text)
-    cpu/ppc4xx/4xx_enet.o	(.text)
+    drivers/net/4xx_enet.o	(.text)
     common/dlmalloc.o	(.text)
     lib_generic/crc32.o		(.text)
     lib_ppc/extable.o	(.text)
     lib_generic/zlib.o		(.text)
 
 /*    . = env_offset;*/
-/*    common/environment.o(.text)*/
+/*    common/env_embedded.o(.text)*/
 
     *(.text)
     *(.fixup)
@@ -152,6 +152,7 @@ SECTIONS
    *(.dynbss)
    *(.bss)
    *(COMMON)
+   . = ALIGN(4);
   }
   _end = . ;
   PROVIDE (end = .);
diff --git a/board/sandburst/karef/u-boot.lds.debug b/board/sandburst/karef/u-boot.lds.debug
index af7d5c08a..d00e25271 100644
--- a/board/sandburst/karef/u-boot.lds.debug
+++ b/board/sandburst/karef/u-boot.lds.debug
@@ -64,13 +64,13 @@ SECTIONS
     cpu/ppc4xx/4xx_uart.o	(.text)
     cpu/ppc4xx/cpu_init.o	(.text)
     cpu/ppc4xx/speed.o	(.text)
-    cpu/ppc4xx/4xx_enet.o	(.text)
+    drivers/net/4xx_enet.o	(.text)
     common/dlmalloc.o	(.text)
     lib_generic/crc32.o		(.text)
     lib_ppc/extable.o	(.text)
     lib_generic/zlib.o		(.text)
 
-/*    common/environment.o(.text) */
+/*    common/env_embedded.o(.text) */
 
     *(.text)
     *(.fixup)
diff --git a/board/sandburst/metrobox/config.mk b/board/sandburst/metrobox/config.mk
index 91aee2fc7..565e826b8 100644
--- a/board/sandburst/metrobox/config.mk
+++ b/board/sandburst/metrobox/config.mk
@@ -34,5 +34,5 @@ PLATFORM_CPPFLAGS += -DDEBUG
 endif
 
 ifeq ($(dbcr),1)
-PLATFORM_CPPFLAGS += -DCFG_INIT_DBCR=0x8cff0000
+PLATFORM_CPPFLAGS += -DCONFIG_SYS_INIT_DBCR=0x8cff0000
 endif
diff --git a/board/sandburst/metrobox/init.S b/board/sandburst/metrobox/init.S
index e398f0008..ccdec46ee 100644
--- a/board/sandburst/metrobox/init.S
+++ b/board/sandburst/metrobox/init.S
@@ -88,12 +88,12 @@
 tlbtab:
 	tlbtab_start
 	tlbentry( 0xf0000000, SZ_256M, 0xf0000000, 1, AC_R|AC_W|AC_X|SA_G|SA_I)
-	tlbentry( CFG_PERIPHERAL_BASE, SZ_256M, 0x40000000, 1, AC_R|AC_W|SA_G|SA_I)
-	tlbentry( CFG_ISRAM_BASE, SZ_256K, 0x80000000, 0, AC_R|AC_W|AC_X|SA_G|SA_I)
-	tlbentry( CFG_SDRAM_BASE, SZ_256M, 0x00000000, 0, AC_R|AC_W|AC_X|SA_G|SA_I )
-	tlbentry( CFG_SDRAM_BASE+0x10000000, SZ_256M, 0x10000000, 0, AC_R|AC_W|AC_X|SA_G|SA_I )
-	tlbentry( CFG_SDRAM_BASE+0x20000000, SZ_256M, 0x20000000, 0, AC_R|AC_W|AC_X|SA_G|SA_I )
-	tlbentry( CFG_SDRAM_BASE+0x30000000, SZ_256M, 0x30000000, 0, AC_R|AC_W|AC_X|SA_G|SA_I )
-	tlbentry( CFG_PCI_BASE, SZ_256M, 0x00000000, 2, AC_R|AC_W|SA_G|SA_I )
-	tlbentry( CFG_PCI_MEMBASE, SZ_256M, 0x00000000, 3, AC_R|AC_W|SA_G|SA_I )
+	tlbentry( CONFIG_SYS_PERIPHERAL_BASE, SZ_256M, 0x40000000, 1, AC_R|AC_W|SA_G|SA_I)
+	tlbentry( CONFIG_SYS_ISRAM_BASE, SZ_256K, 0x80000000, 0, AC_R|AC_W|AC_X|SA_G|SA_I)
+	tlbentry( CONFIG_SYS_SDRAM_BASE, SZ_256M, 0x00000000, 0, AC_R|AC_W|AC_X|SA_G|SA_I )
+	tlbentry( CONFIG_SYS_SDRAM_BASE+0x10000000, SZ_256M, 0x10000000, 0, AC_R|AC_W|AC_X|SA_G|SA_I )
+	tlbentry( CONFIG_SYS_SDRAM_BASE+0x20000000, SZ_256M, 0x20000000, 0, AC_R|AC_W|AC_X|SA_G|SA_I )
+	tlbentry( CONFIG_SYS_SDRAM_BASE+0x30000000, SZ_256M, 0x30000000, 0, AC_R|AC_W|AC_X|SA_G|SA_I )
+	tlbentry( CONFIG_SYS_PCI_BASE, SZ_256M, 0x00000000, 2, AC_R|AC_W|SA_G|SA_I )
+	tlbentry( CONFIG_SYS_PCI_MEMBASE, SZ_256M, 0x00000000, 3, AC_R|AC_W|SA_G|SA_I )
 	tlbtab_end
diff --git a/board/sandburst/metrobox/metrobox.c b/board/sandburst/metrobox/metrobox.c
index c38850d6c..19302dc61 100644
--- a/board/sandburst/metrobox/metrobox.c
+++ b/board/sandburst/metrobox/metrobox.c
@@ -25,6 +25,7 @@
 #include <command.h>
 #include "metrobox.h"
 #include "metrobox_version.h"
+#include <timestamp.h>
 #include <asm/processor.h>
 #include <asm/io.h>
 #include <spd_sdram.h>
@@ -55,7 +56,7 @@ int board_early_init_f (void)
 	mtsdr(sdr_pfc0, 0x00103E00);
 
 	/* Setup access for LEDs, and system topology info */
-	gpio_regs = (ppc440_gpio_regs_t *)CFG_GPIO_BASE;
+	gpio_regs = (ppc440_gpio_regs_t *)CONFIG_SYS_GPIO_BASE;
 	gpio_regs->open_drain = SBCOMMON_GPIO_SYS_LEDS;
 	gpio_regs->tri_state  = SBCOMMON_GPIO_DBGLEDS;
 
@@ -83,7 +84,7 @@ int board_early_init_f (void)
 	      EBC_BXAP_RE_DISABLED  | EBC_BXAP_BEM_WRITEONLY |
 	      EBC_BXAP_PEN_DISABLED);
 
-	mtebc(pb0cr, EBC_BXCR_BAS_ENCODE(CFG_FLASH_BASE) |
+	mtebc(pb0cr, EBC_BXCR_BAS_ENCODE(CONFIG_SYS_FLASH_BASE) |
 	      EBC_BXCR_BS_1MB | EBC_BXCR_BU_RW | EBC_BXCR_BW_8BIT);
 	/*--------------------------------------------------------------------+
 	  | 8KB NVRAM/RTC. Initialize bank 1 with default values.
@@ -246,7 +247,7 @@ int checkboard (void)
 	unsigned char opto_rev, opto_id;
 	OPTO_FPGA_REGS_ST *opto_ps;
 
-	opto_ps = (OPTO_FPGA_REGS_ST *)CFG_FPGA_BASE;
+	opto_ps = (OPTO_FPGA_REGS_ST *)CONFIG_SYS_FPGA_BASE;
 
 	opto_rev = (unsigned char)((opto_ps->revision_ul &
 				    SAND_HAL_XC_XCVR_CNTL_REVISION_REVISION_MASK)
@@ -270,7 +271,7 @@ int checkboard (void)
 	printf ("Board: Sandburst Corporation MetroBox Serial Number: %d\n", sernum);
 	printf ("%s\n", METROBOX_U_BOOT_REL_STR);
 
-	printf ("Built %s %s by %s\n", __DATE__, __TIME__, BUILDUSER);
+	printf ("Built %s %s by %s\n", U_BOOT_DATE, U_BOOT_TIME, BUILDUSER);
 	if (sbcommon_get_master()) {
 		printf("Slot 0 - Master\nSlave board");
 		if (sbcommon_secondary_present())
@@ -286,7 +287,7 @@ int checkboard (void)
 
 	/* Fix the ack in the bme 32 */
 	udelay(5000);
-	out32(CFG_BME32_BASE + 0x0000000C, 0x00000001);
+	out32(CONFIG_SYS_BME32_BASE + 0x0000000C, 0x00000001);
 	asm("eieio");
 
 
@@ -302,7 +303,7 @@ int misc_init_f (void)
 {
 	/* Turn on i2c bus 1 */
 	puts ("I2C1:  ");
-	i2c1_init (CFG_I2C_SPEED, CFG_I2C_SLAVE);
+	i2c1_init (CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
 	puts ("ready\n");
 
 	/* Turn on fans */
@@ -323,7 +324,7 @@ int misc_init_r (void)
 	unsigned char opto_rev;
 	OPTO_FPGA_REGS_ST *opto_ps;
 
-	opto_ps = (OPTO_FPGA_REGS_ST *)CFG_FPGA_BASE;
+	opto_ps = (OPTO_FPGA_REGS_ST *)CONFIG_SYS_FPGA_BASE;
 
 	if(NULL != getenv("secondserial")) {
 	    puts("secondserial is set, switching to second serial port\n");
@@ -335,7 +336,8 @@ int misc_init_r (void)
 	setenv("ubrelver", METROBOX_U_BOOT_REL_STR);
 
 	memset(envstr, 0, 255);
-	sprintf (envstr, "Built %s %s by %s", __DATE__, __TIME__, BUILDUSER);
+	sprintf (envstr, "Built %s %s by %s",
+		 U_BOOT_DATE, U_BOOT_TIME, BUILDUSER);
 	setenv("bldstr", envstr);
 	saveenv();
 
@@ -387,7 +389,7 @@ int misc_init_r (void)
 void ide_set_reset(int on)
 {
 	OPTO_FPGA_REGS_ST *opto_ps;
-	opto_ps = (OPTO_FPGA_REGS_ST *)CFG_FPGA_BASE;
+	opto_ps = (OPTO_FPGA_REGS_ST *)CONFIG_SYS_FPGA_BASE;
 
 	if (on) {		/* assert RESET */
 	    opto_ps->reset_ul &= ~SAND_HAL_XC_XCVR_CNTL_RESET_CF_RESET_N_MASK;
@@ -412,7 +414,7 @@ void fpga_init(void)
 	/*
 	 * Take appropriate hw bits out of reset
 	 */
-	opto_ps = (OPTO_FPGA_REGS_ST *)CFG_FPGA_BASE;
+	opto_ps = (OPTO_FPGA_REGS_ST *)CONFIG_SYS_FPGA_BASE;
 
 	tmp =
 	    SAND_HAL_XC_XCVR_CNTL_RESET_MAC1_RESET_N_MASK |
diff --git a/board/sandburst/metrobox/u-boot.lds b/board/sandburst/metrobox/u-boot.lds
index 6abf3f390..54e18e053 100644
--- a/board/sandburst/metrobox/u-boot.lds
+++ b/board/sandburst/metrobox/u-boot.lds
@@ -74,14 +74,14 @@ SECTIONS
     cpu/ppc4xx/4xx_uart.o	(.text)
     cpu/ppc4xx/cpu_init.o	(.text)
     cpu/ppc4xx/speed.o	(.text)
-    cpu/ppc4xx/4xx_enet.o	(.text)
+    drivers/net/4xx_enet.o	(.text)
     common/dlmalloc.o	(.text)
     lib_generic/crc32.o		(.text)
     lib_ppc/extable.o	(.text)
     lib_generic/zlib.o		(.text)
 
 /*    . = env_offset;*/
-/*    common/environment.o(.text)*/
+/*    common/env_embedded.o(.text)*/
 
     *(.text)
     *(.fixup)
@@ -152,6 +152,7 @@ SECTIONS
    *(.dynbss)
    *(.bss)
    *(COMMON)
+   . = ALIGN(4);
   }
   _end = . ;
   PROVIDE (end = .);
diff --git a/board/sandburst/metrobox/u-boot.lds.debug b/board/sandburst/metrobox/u-boot.lds.debug
index 527c26432..a3350f279 100644
--- a/board/sandburst/metrobox/u-boot.lds.debug
+++ b/board/sandburst/metrobox/u-boot.lds.debug
@@ -64,13 +64,13 @@ SECTIONS
     cpu/ppc4xx/4xx_uart.o	(.text)
     cpu/ppc4xx/cpu_init.o	(.text)
     cpu/ppc4xx/speed.o	(.text)
-    cpu/ppc4xx/4xx_enet.o	(.text)
+    drivers/net/4xx_enet.o	(.text)
     common/dlmalloc.o	(.text)
     lib_generic/crc32.o		(.text)
     lib_ppc/extable.o	(.text)
     lib_generic/zlib.o		(.text)
 
-/*    common/environment.o(.text) */
+/*    common/env_embedded.o(.text) */
 
     *(.text)
     *(.fixup)
diff --git a/board/sandpoint/early_init.S b/board/sandpoint/early_init.S
index 07dafb716..531dcdf4a 100644
--- a/board/sandpoint/early_init.S
+++ b/board/sandpoint/early_init.S
@@ -32,68 +32,68 @@
 
 #if defined(USE_DINK32)
   /* We are running from RAM, so do not clear the MCCR1_MEMGO bit! */
-  #define MCCR1VAL ((CFG_ROMNAL << MCCR1_ROMNAL_SHIFT) | (CFG_ROMFAL << MCCR1_ROMFAL_SHIFT) | MCCR1_MEMGO)
+  #define MCCR1VAL ((CONFIG_SYS_ROMNAL << MCCR1_ROMNAL_SHIFT) | (CONFIG_SYS_ROMFAL << MCCR1_ROMFAL_SHIFT) | MCCR1_MEMGO)
 #else
-  #define MCCR1VAL (CFG_ROMNAL << MCCR1_ROMNAL_SHIFT) | (CFG_ROMFAL << MCCR1_ROMFAL_SHIFT)
+  #define MCCR1VAL (CONFIG_SYS_ROMNAL << MCCR1_ROMNAL_SHIFT) | (CONFIG_SYS_ROMFAL << MCCR1_ROMFAL_SHIFT)
 #endif
 
 	.text
 
 	/* Values to program into memory controller registers */
 tbl:	.long	MCCR1, MCCR1VAL
-	.long	MCCR2, CFG_REFINT << MCCR2_REFINT_SHIFT
+	.long	MCCR2, CONFIG_SYS_REFINT << MCCR2_REFINT_SHIFT
 	.long	MCCR3
-	.long	(((CFG_BSTOPRE & 0x000000f0) >> 4) << MCCR3_BSTOPRE2TO5_SHIFT) | \
-		(CFG_REFREC << MCCR3_REFREC_SHIFT) | \
-		(CFG_RDLAT  << MCCR3_RDLAT_SHIFT)
+	.long	(((CONFIG_SYS_BSTOPRE & 0x000000f0) >> 4) << MCCR3_BSTOPRE2TO5_SHIFT) | \
+		(CONFIG_SYS_REFREC << MCCR3_REFREC_SHIFT) | \
+		(CONFIG_SYS_RDLAT  << MCCR3_RDLAT_SHIFT)
 	.long	MCCR4
-	.long	(CFG_PRETOACT << MCCR4_PRETOACT_SHIFT) | (CFG_ACTTOPRE << MCCR4_ACTTOPRE_SHIFT) | \
-		(CFG_REGISTERD_TYPE_BUFFER << 20) | \
-		(((CFG_BSTOPRE & 0x00000300) >> 8) << MCCR4_BSTOPRE0TO1_SHIFT ) | \
-		((CFG_SDMODE_CAS_LAT << 4) | (CFG_SDMODE_WRAP << 3) | \
-		(CFG_SDMODE_BURSTLEN) << MCCR4_SDMODE_SHIFT) | \
-		(CFG_ACTTORW << MCCR4_ACTTORW_SHIFT) | \
-		((CFG_BSTOPRE & 0x0000000f) << MCCR4_BSTOPRE6TO9_SHIFT )
+	.long	(CONFIG_SYS_PRETOACT << MCCR4_PRETOACT_SHIFT) | (CONFIG_SYS_ACTTOPRE << MCCR4_ACTTOPRE_SHIFT) | \
+		(CONFIG_SYS_REGISTERD_TYPE_BUFFER << 20) | \
+		(((CONFIG_SYS_BSTOPRE & 0x00000300) >> 8) << MCCR4_BSTOPRE0TO1_SHIFT ) | \
+		((CONFIG_SYS_SDMODE_CAS_LAT << 4) | (CONFIG_SYS_SDMODE_WRAP << 3) | \
+		(CONFIG_SYS_SDMODE_BURSTLEN) << MCCR4_SDMODE_SHIFT) | \
+		(CONFIG_SYS_ACTTORW << MCCR4_ACTTORW_SHIFT) | \
+		((CONFIG_SYS_BSTOPRE & 0x0000000f) << MCCR4_BSTOPRE6TO9_SHIFT )
 	.long	MSAR1
-	.long	(((CFG_BANK0_START & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) <<  0) | \
-		(((CFG_BANK1_START & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) <<  8) | \
-		(((CFG_BANK2_START & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 16) | \
-		(((CFG_BANK3_START & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 24)
+	.long	(((CONFIG_SYS_BANK0_START & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) <<  0) | \
+		(((CONFIG_SYS_BANK1_START & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) <<  8) | \
+		(((CONFIG_SYS_BANK2_START & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 16) | \
+		(((CONFIG_SYS_BANK3_START & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 24)
 	.long	EMSAR1
-	.long	(((CFG_BANK0_START & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) <<  0) | \
-		(((CFG_BANK1_START & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) <<  8) | \
-		(((CFG_BANK2_START & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 16) | \
-		(((CFG_BANK3_START & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 24)
+	.long	(((CONFIG_SYS_BANK0_START & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) <<  0) | \
+		(((CONFIG_SYS_BANK1_START & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) <<  8) | \
+		(((CONFIG_SYS_BANK2_START & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 16) | \
+		(((CONFIG_SYS_BANK3_START & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 24)
 	.long	MSAR2
-	.long	(((CFG_BANK4_START & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) <<  0) | \
-		(((CFG_BANK5_START & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) <<  8) | \
-		(((CFG_BANK6_START & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 16) | \
-		(((CFG_BANK7_START & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 24)
+	.long	(((CONFIG_SYS_BANK4_START & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) <<  0) | \
+		(((CONFIG_SYS_BANK5_START & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) <<  8) | \
+		(((CONFIG_SYS_BANK6_START & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 16) | \
+		(((CONFIG_SYS_BANK7_START & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 24)
 	.long	EMSAR2
-	.long	(((CFG_BANK4_START & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) <<  0) | \
-		(((CFG_BANK5_START & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) <<  8) | \
-		(((CFG_BANK6_START & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 16) | \
-		(((CFG_BANK7_START & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 24)
+	.long	(((CONFIG_SYS_BANK4_START & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) <<  0) | \
+		(((CONFIG_SYS_BANK5_START & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) <<  8) | \
+		(((CONFIG_SYS_BANK6_START & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 16) | \
+		(((CONFIG_SYS_BANK7_START & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 24)
 	.long	MEAR1
-	.long	(((CFG_BANK0_END & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) <<  0) | \
-		(((CFG_BANK1_END & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) <<  8) | \
-		(((CFG_BANK2_END & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 16) | \
-		(((CFG_BANK3_END & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 24)
+	.long	(((CONFIG_SYS_BANK0_END & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) <<  0) | \
+		(((CONFIG_SYS_BANK1_END & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) <<  8) | \
+		(((CONFIG_SYS_BANK2_END & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 16) | \
+		(((CONFIG_SYS_BANK3_END & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 24)
 	.long	EMEAR1
-	.long	(((CFG_BANK0_END & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) <<  0) | \
-		(((CFG_BANK1_END & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) <<  8) | \
-		(((CFG_BANK2_END & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 16) | \
-		(((CFG_BANK3_END & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 24)
+	.long	(((CONFIG_SYS_BANK0_END & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) <<  0) | \
+		(((CONFIG_SYS_BANK1_END & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) <<  8) | \
+		(((CONFIG_SYS_BANK2_END & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 16) | \
+		(((CONFIG_SYS_BANK3_END & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 24)
 	.long	MEAR2
-	.long	(((CFG_BANK4_END & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) <<  0) | \
-		(((CFG_BANK5_END & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) <<  8) | \
-		(((CFG_BANK6_END & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 16) | \
-		(((CFG_BANK7_END & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 24)
+	.long	(((CONFIG_SYS_BANK4_END & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) <<  0) | \
+		(((CONFIG_SYS_BANK5_END & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) <<  8) | \
+		(((CONFIG_SYS_BANK6_END & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 16) | \
+		(((CONFIG_SYS_BANK7_END & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 24)
 	.long	EMEAR2
-	.long	(((CFG_BANK4_END & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) <<  0) | \
-		(((CFG_BANK5_END & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) <<  8) | \
-		(((CFG_BANK6_END & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 16) | \
-		(((CFG_BANK7_END & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 24)
+	.long	(((CONFIG_SYS_BANK4_END & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) <<  0) | \
+		(((CONFIG_SYS_BANK5_END & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) <<  8) | \
+		(((CONFIG_SYS_BANK6_END & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 16) | \
+		(((CONFIG_SYS_BANK7_END & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 24)
 	.long	0
 
 
@@ -123,7 +123,7 @@ loop:	lwz	r1, 4(r5)
 	/* set bank enable bits */
 	lis	r0, MBER@h
 	ori	r0, 0, MBER@l
-	li	r1, CFG_BANK_ENABLE
+	li	r1, CONFIG_SYS_BANK_ENABLE
 	stwbrx	r0, 0, r3
 	eieio
 	stb	r1, 0(r4)
@@ -145,8 +145,8 @@ delay:	bdnz	delay
 	eieio
 
 	/* set up stack pointer */
-	lis	r1, CFG_INIT_SP_OFFSET@h
-	ori	r1, r1, CFG_INIT_SP_OFFSET@l
+	lis	r1, CONFIG_SYS_INIT_SP_OFFSET@h
+	ori	r1, r1, CONFIG_SYS_INIT_SP_OFFSET@l
 
 	mtlr	r10
 	blr
diff --git a/board/sandpoint/flash.c b/board/sandpoint/flash.c
index a9f73ff0d..e366cc699 100644
--- a/board/sandpoint/flash.c
+++ b/board/sandpoint/flash.c
@@ -30,17 +30,17 @@
 #define ROM_CS0_START	0xFF800000
 #define ROM_CS1_START	0xFF000000
 
-flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips    */
+flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips    */
 
-#if defined(CFG_ENV_IS_IN_FLASH)
-# ifndef  CFG_ENV_ADDR
-#  define CFG_ENV_ADDR  (CFG_FLASH_BASE + CFG_ENV_OFFSET)
+#if defined(CONFIG_ENV_IS_IN_FLASH)
+# ifndef  CONFIG_ENV_ADDR
+#  define CONFIG_ENV_ADDR  (CONFIG_SYS_FLASH_BASE + CONFIG_ENV_OFFSET)
 # endif
-# ifndef  CFG_ENV_SIZE
-#  define CFG_ENV_SIZE  CFG_ENV_SECT_SIZE
+# ifndef  CONFIG_ENV_SIZE
+#  define CONFIG_ENV_SIZE  CONFIG_ENV_SECT_SIZE
 # endif
-# ifndef  CFG_ENV_SECT_SIZE
-#  define CFG_ENV_SECT_SIZE  CFG_ENV_SIZE
+# ifndef  CONFIG_ENV_SECT_SIZE
+#  define CONFIG_ENV_SECT_SIZE  CONFIG_ENV_SIZE
 # endif
 #endif
 
@@ -140,10 +140,10 @@ flash_init(void)
 {
   unsigned long i;
   unsigned char j;
-  static const ulong flash_banks[] = CFG_FLASH_BANKS;
+  static const ulong flash_banks[] = CONFIG_SYS_FLASH_BANKS;
 
   /* Init: no FLASHes known */
-  for (i = 0; i < CFG_MAX_FLASH_BANKS; i++)
+  for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++)
   {
     flash_info_t * const pflinfo = &flash_info[i];
     pflinfo->flash_id = FLASH_UNKNOWN;
@@ -154,9 +154,9 @@ flash_init(void)
   /* Enable writes to Sandpoint flash */
   {
     register unsigned char temp;
-    CONFIG_READ_BYTE(CFG_WINBOND_ISA_CFG_ADDR + WINBOND_CSCR, temp);
+    CONFIG_READ_BYTE(CONFIG_SYS_WINBOND_ISA_CFG_ADDR + WINBOND_CSCR, temp);
     temp &= ~0x20; /* clear BIOSWP bit */
-    CONFIG_WRITE_BYTE(CFG_WINBOND_ISA_CFG_ADDR + WINBOND_CSCR, temp);
+    CONFIG_WRITE_BYTE(CONFIG_SYS_WINBOND_ISA_CFG_ADDR + WINBOND_CSCR, temp);
   }
 
   for(i = 0; i < sizeof flash_banks / sizeof flash_banks[0]; i++)
@@ -223,17 +223,17 @@ flash_init(void)
     }
     /* Protect monitor and environment sectors
      */
-#if CFG_MONITOR_BASE >= CFG_FLASH_BASE
+#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE
     flash_protect(FLAG_PROTECT_SET,
-		CFG_MONITOR_BASE,
-		CFG_MONITOR_BASE + monitor_flash_len - 1,
+		CONFIG_SYS_MONITOR_BASE,
+		CONFIG_SYS_MONITOR_BASE + monitor_flash_len - 1,
 		&flash_info[0]);
 #endif
 
-#if (CFG_ENV_IS_IN_FLASH == 1) && defined(CFG_ENV_ADDR)
+#if defined(CONFIG_ENV_IS_IN_FLASH) && defined(CONFIG_ENV_ADDR)
     flash_protect(FLAG_PROTECT_SET,
-		CFG_ENV_ADDR,
-		CFG_ENV_ADDR + CFG_ENV_SIZE - 1,
+		CONFIG_ENV_ADDR,
+		CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1,
 		&flash_info[0]);
 #endif
 
@@ -612,7 +612,7 @@ flash_erase(flash_info_t *info, int s_first, int s_last)
     addr = (FLASH_WORD_SIZE *)(info->start[0] + (
 			(info->start[l_sect] - info->start[0]) << sh8b));
     while ((addr[0] & (FLASH_WORD_SIZE)0x00800080) != (FLASH_WORD_SIZE)0x00800080) {
-	if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+	if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
 	    printf ("Timeout\n");
 	    return 1;
 	}
@@ -751,7 +751,7 @@ static int write_word (flash_info_t *info, ulong dest, ulong data)
 	    start = get_timer (0);
 	    while ((dest2[i << sh8b] & (FLASH_WORD_SIZE)0x00800080) !=
 		   (data2[i] & (FLASH_WORD_SIZE)0x00800080)) {
-	      if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+	      if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
 		return (1);
 	      }
 	    }
diff --git a/board/sandpoint/sandpoint.c b/board/sandpoint/sandpoint.c
index 7429647b8..bb01d73bd 100644
--- a/board/sandpoint/sandpoint.c
+++ b/board/sandpoint/sandpoint.c
@@ -24,6 +24,7 @@
 #include <common.h>
 #include <mpc824x.h>
 #include <pci.h>
+#include <netdev.h>
 
 int checkboard (void)
 {
@@ -57,7 +58,7 @@ phys_size_t initdram (int board_type)
 	long mear1;
 	long emear1;
 
-	size = get_ram_size(CFG_SDRAM_BASE, CFG_MAX_RAM_SIZE);
+	size = get_ram_size(CONFIG_SYS_SDRAM_BASE, CONFIG_SYS_MAX_RAM_SIZE);
 
 	new_bank0_end = size - 1;
 	mear1 = mpc824x_mpc107_getreg(MEAR1);
@@ -99,3 +100,8 @@ void pci_init_board(void)
 {
 	pci_mpc824x_init(&hose);
 }
+
+int board_eth_init(bd_t *bis)
+{
+	return pci_eth_init(bis);
+}
diff --git a/board/sbc2410x/flash.c b/board/sbc2410x/flash.c
index 0c669e4d7..abb093558 100644
--- a/board/sbc2410x/flash.c
+++ b/board/sbc2410x/flash.c
@@ -29,7 +29,7 @@ ulong myflush (void);
 #define FLASH_BANK_SIZE	PHYS_FLASH_SIZE
 #define MAIN_SECT_SIZE  0x10000	/* 64 KB */
 
-flash_info_t flash_info[CFG_MAX_FLASH_BANKS];
+flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];
 
 #define CMD_READ_ARRAY		0x000000F0
 #define CMD_UNLOCK1		0x000000AA
@@ -39,8 +39,8 @@ flash_info_t flash_info[CFG_MAX_FLASH_BANKS];
 #define CMD_PROGRAM		0x000000A0
 #define CMD_UNLOCK_BYPASS	0x00000020
 
-#define MEM_FLASH_ADDR1		(*(volatile u16 *)(CFG_FLASH_BASE + (0x00000555 << 1)))
-#define MEM_FLASH_ADDR2		(*(volatile u16 *)(CFG_FLASH_BASE + (0x000002AA << 1)))
+#define MEM_FLASH_ADDR1		(*(volatile u16 *)(CONFIG_SYS_FLASH_BASE + (0x00000555 << 1)))
+#define MEM_FLASH_ADDR2		(*(volatile u16 *)(CONFIG_SYS_FLASH_BASE + (0x000002AA << 1)))
 
 #define BIT_ERASE_DONE		0x00000080
 #define BIT_RDY_MASK		0x00000080
@@ -59,7 +59,7 @@ ulong flash_init (void)
 	int i, j;
 	ulong size = 0;
 
-	for (i = 0; i < CFG_MAX_FLASH_BANKS; i++) {
+	for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) {
 		ulong flashbase = 0;
 
 		flash_info[i].flash_id =
@@ -73,8 +73,8 @@ ulong flash_init (void)
 #error "Unknown flash configured"
 #endif
 			flash_info[i].size = FLASH_BANK_SIZE;
-		flash_info[i].sector_count = CFG_MAX_FLASH_SECT;
-		memset (flash_info[i].protect, 0, CFG_MAX_FLASH_SECT);
+		flash_info[i].sector_count = CONFIG_SYS_MAX_FLASH_SECT;
+		memset (flash_info[i].protect, 0, CONFIG_SYS_MAX_FLASH_SECT);
 		if (i == 0)
 			flashbase = PHYS_FLASH_1;
 		else
@@ -109,13 +109,13 @@ ulong flash_init (void)
 	}
 
 	flash_protect (FLAG_PROTECT_SET,
-		       CFG_FLASH_BASE,
-		       CFG_FLASH_BASE + monitor_flash_len - 1,
+		       CONFIG_SYS_FLASH_BASE,
+		       CONFIG_SYS_FLASH_BASE + monitor_flash_len - 1,
 		       &flash_info[0]);
 
 	flash_protect (FLAG_PROTECT_SET,
-		       CFG_ENV_ADDR,
-		       CFG_ENV_ADDR + CFG_ENV_SIZE - 1, &flash_info[0]);
+		       CONFIG_ENV_ADDR,
+		       CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1, &flash_info[0]);
 
 	return size;
 }
@@ -234,7 +234,7 @@ int flash_erase (flash_info_t * info, int s_first, int s_last)
 
 				/* check timeout */
 				if (get_timer_masked () >
-				    CFG_FLASH_ERASE_TOUT) {
+				    CONFIG_SYS_FLASH_ERASE_TOUT) {
 					MEM_FLASH_ADDR1 = CMD_READ_ARRAY;
 					chip = TMO;
 					break;
@@ -330,7 +330,7 @@ static int write_hword (flash_info_t * info, ulong dest, ushort data)
 		result = *addr;
 
 		/* check timeout */
-		if (get_timer_masked () > CFG_FLASH_ERASE_TOUT) {
+		if (get_timer_masked () > CONFIG_SYS_FLASH_ERASE_TOUT) {
 			chip = ERR | TMO;
 			break;
 		}
diff --git a/board/sbc2410x/u-boot.lds b/board/sbc2410x/u-boot.lds
index 3b7977672..d0666ac73 100644
--- a/board/sbc2410x/u-boot.lds
+++ b/board/sbc2410x/u-boot.lds
@@ -51,6 +51,6 @@ SECTIONS
 
 	. = ALIGN(4);
 	__bss_start = .;
-	.bss (NOLOAD) : { *(.bss) }
+	.bss (NOLOAD) : { *(.bss) . = ALIGN(4); }
 	_end = .;
 }
diff --git a/board/sbc405/strataflash.c b/board/sbc405/strataflash.c
index d21d885fa..e5863d6ce 100644
--- a/board/sbc405/strataflash.c
+++ b/board/sbc405/strataflash.c
@@ -103,7 +103,7 @@ typedef union {
 
 #define NUM_ERASE_REGIONS 4
 
-flash_info_t	flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips	*/
+flash_info_t	flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips	*/
 
 
 /*-----------------------------------------------------------------------
@@ -120,7 +120,7 @@ static int flash_detect_cfi(flash_info_t * info);
 static ulong flash_get_size (ulong base, int banknum);
 static int flash_write_cfiword (flash_info_t *info, ulong dest, cfiword_t cword);
 static int flash_full_status_check(flash_info_t * info, ulong sector, ulong tout, char * prompt);
-#ifdef CFG_FLASH_USE_BUFFER_WRITE
+#ifdef CONFIG_SYS_FLASH_USE_BUFFER_WRITE
 static int flash_write_cfibuffer(flash_info_t * info, ulong dest, uchar * cp, int len);
 #endif
 /*-----------------------------------------------------------------------
@@ -180,14 +180,14 @@ unsigned long flash_init (void)
 	 *
 	 */
 
-	address = CFG_FLASH_BASE;
+	address = CONFIG_SYS_FLASH_BASE;
 	size = 0;
 
 	/* Init: no FLASHes known */
-	for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) {
+	for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
 		flash_info[i].flash_id = FLASH_UNKNOWN;
 		size += flash_info[i].size = flash_get_size(address, i);
-		address += CFG_FLASH_INCREMENT;
+		address += CONFIG_SYS_FLASH_INCREMENT;
 		if (flash_info[0].flash_id == FLASH_UNKNOWN) {
 			printf ("## Unknown FLASH on Bank %d - Size = 0x%08lx = %ld MB\n",i,
 				flash_info[0].size, flash_info[i].size<<20);
@@ -196,14 +196,14 @@ unsigned long flash_init (void)
 
 #if 0 /* test-only */
 	/* Monitor protection ON by default */
-#if (CFG_MONITOR_BASE >= CFG_FLASH_BASE)
-	for(i=0; flash_info[0].start[i] < CFG_MONITOR_BASE+CFG_MONITOR_LEN-1; i++)
+#if (CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE)
+	for(i=0; flash_info[0].start[i] < CONFIG_SYS_MONITOR_BASE+CONFIG_SYS_MONITOR_LEN-1; i++)
 		(void)flash_real_protect(&flash_info[0], i, 1);
 #endif
 #else
 	/* monitor protection ON by default */
 	flash_protect (FLAG_PROTECT_SET,
-		       - CFG_MONITOR_LEN,
+		       - CONFIG_SYS_MONITOR_LEN,
 		       - 1, &flash_info[1]);
 #endif
 
@@ -277,7 +277,7 @@ void flash_print_info  (flash_info_t *info)
 
 	printf ("  Sector Start Addresses:");
 	for (i=0; i<info->sector_count; ++i) {
-#ifdef CFG_FLASH_EMPTY_INFO
+#ifdef CONFIG_SYS_FLASH_EMPTY_INFO
 		int k;
 		int size;
 		int erased;
@@ -357,7 +357,7 @@ int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
 		wp = cp;
 	}
 
-#ifdef CFG_FLASH_USE_BUFFER_WRITE
+#ifdef CONFIG_SYS_FLASH_USE_BUFFER_WRITE
 	while(cnt >= info->portwidth) {
 		i = info->buffer_size > cnt? cnt: info->buffer_size;
 		if((rc = flash_write_cfibuffer(info, wp, src,i)) != ERR_OK)
@@ -378,7 +378,7 @@ int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
 		wp += info->portwidth;
 		cnt -= info->portwidth;
 	}
-#endif /* CFG_FLASH_USE_BUFFER_WRITE */
+#endif /* CONFIG_SYS_FLASH_USE_BUFFER_WRITE */
 	if (cnt == 0) {
 		return (0);
 	}
@@ -720,7 +720,7 @@ static int flash_write_cfiword (flash_info_t *info, ulong dest, cfiword_t cword)
 	return flash_full_status_check(info, 0, info->write_tout, "write");
 }
 
-#ifdef CFG_FLASH_USE_BUFFER_WRITE
+#ifdef CONFIG_SYS_FLASH_USE_BUFFER_WRITE
 
 /* loop through the sectors from the highest address
  * when the passed address is greater or equal to the sector address
@@ -790,4 +790,4 @@ static int flash_write_cfibuffer(flash_info_t * info, ulong dest, uchar * cp, in
 	flash_write_cmd(info, sector, 0, FLASH_CMD_CLEAR_STATUS);
 	return retcode;
 }
-#endif /* CFG_USE_FLASH_BUFFER_WRITE */
+#endif /* CONFIG_SYS_USE_FLASH_BUFFER_WRITE */
diff --git a/board/sbc405/u-boot.lds b/board/sbc405/u-boot.lds
index 7b1c6b211..d6f34c992 100644
--- a/board/sbc405/u-boot.lds
+++ b/board/sbc405/u-boot.lds
@@ -66,14 +66,14 @@ SECTIONS
     cpu/ppc4xx/4xx_uart.o	(.text)
     cpu/ppc4xx/cpu_init.o	(.text)
     cpu/ppc4xx/speed.o	(.text)
-    cpu/ppc4xx/4xx_enet.o	(.text)
+    drivers/net/4xx_enet.o	(.text)
     common/dlmalloc.o	(.text)
     lib_generic/crc32.o		(.text)
     lib_ppc/extable.o	(.text)
     lib_generic/zlib.o		(.text)
 
 /*    . = env_offset;*/
-/*    common/environment.o(.text)*/
+/*    common/env_embedded.o(.text)*/
 
     *(.text)
     *(.fixup)
@@ -143,6 +143,7 @@ SECTIONS
    *(.dynbss)
    *(.bss)
    *(COMMON)
+   . = ALIGN(4);
   }
   _end = . ;
   PROVIDE (end = .);
diff --git a/board/sbc8240/flash.c b/board/sbc8240/flash.c
index dec615683..a095753a4 100644
--- a/board/sbc8240/flash.c
+++ b/board/sbc8240/flash.c
@@ -32,10 +32,10 @@
 #include <mpc824x.h>
 #include <asm/processor.h>
 
-#if CFG_MAX_FLASH_BANKS != 1
-#error "CFG_MAX_FLASH_BANKS must be 1"
+#if CONFIG_SYS_MAX_FLASH_BANKS != 1
+#error "CONFIG_SYS_MAX_FLASH_BANKS must be 1"
 #endif
-flash_info_t flash_info[CFG_MAX_FLASH_BANKS];	/* info for FLASH chips        */
+flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];	/* info for FLASH chips        */
 
 /*-----------------------------------------------------------------------
  * Functions
@@ -399,7 +399,7 @@ int wait_for_DQ7 (flash_info_t * info, int sect)
 	last = start;
 	while ((addr[0] & (FLASH_WORD_SIZE) 0x00800080) !=
 	       (FLASH_WORD_SIZE) 0x00800080) {
-		if ((now = get_timer (start)) > CFG_FLASH_ERASE_TOUT) {
+		if ((now = get_timer (start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
 			printf ("Timeout\n");
 			return -1;
 		}
@@ -628,7 +628,7 @@ static int write_word (flash_info_t * info, ulong dest, ulong data)
 		while ((dest2[i] & (FLASH_WORD_SIZE) 0x00800080) !=
 		       (data2[i] & (FLASH_WORD_SIZE) 0x00800080)) {
 
-			if (get_timer (start) > CFG_FLASH_WRITE_TOUT) {
+			if (get_timer (start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
 				return (1);
 			}
 		}
diff --git a/board/sbc8240/sbc8240.c b/board/sbc8240/sbc8240.c
index 175720d90..01abe26a4 100644
--- a/board/sbc8240/sbc8240.c
+++ b/board/sbc8240/sbc8240.c
@@ -28,6 +28,7 @@
 #include <mpc824x.h>
 #include <asm/processor.h>
 #include <pci.h>
+#include <netdev.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -52,7 +53,7 @@ phys_size_t initdram(int board_type)
 	long mear1;
 	long emear1;
 
-	size = get_ram_size(CFG_SDRAM_BASE, CFG_MAX_RAM_SIZE);
+	size = get_ram_size(CONFIG_SYS_SDRAM_BASE, CONFIG_SYS_MAX_RAM_SIZE);
 
 	new_bank0_end = size - 1;
 	mear1 = mpc824x_mpc107_getreg(MEAR1);
@@ -96,10 +97,15 @@ void pci_init_board(void)
 /* ------------------------------------------------------------------------- */
 int misc_init_r (void)
 {
-#ifdef CFG_LED_BASE
-	*((unsigned char *) (CFG_LED_BASE)) = 0xFF;
-#endif /* CFG_LED_BASE */
+#ifdef CONFIG_SYS_LED_BASE
+	*((unsigned char *) (CONFIG_SYS_LED_BASE)) = 0xFF;
+#endif /* CONFIG_SYS_LED_BASE */
 
 	return (0);
 }
 #endif /* CONFIG_MISC_INIT_R */
+
+int board_eth_init(bd_t *bis)
+{
+	return pci_eth_init(bis);
+}
diff --git a/board/sbc8260/flash.c b/board/sbc8260/flash.c
index 9a8b95225..645c67f43 100644
--- a/board/sbc8260/flash.c
+++ b/board/sbc8260/flash.c
@@ -31,7 +31,7 @@
 #include <common.h>
 #include <mpc8xx.h>
 
-flash_info_t flash_info[CFG_MAX_FLASH_BANKS];
+flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];
 
 /*-----------------------------------------------------------------------
  * Functions
@@ -49,35 +49,35 @@ unsigned long flash_init (void)
     int i;
 
     /* Init: no FLASHes known */
-    for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) {
+    for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
 	flash_info[i].flash_id = FLASH_UNKNOWN;
     }
 
     /* for now, only support the 4 MB Flash SIMM */
-    size = flash_get_size((vu_long *)CFG_FLASH0_BASE, &flash_info[0]);
+    size = flash_get_size((vu_long *)CONFIG_SYS_FLASH0_BASE, &flash_info[0]);
 
     /*
      * protect monitor and environment sectors
      */
 
-#if CFG_MONITOR_BASE >= CFG_FLASH0_BASE
+#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH0_BASE
     flash_protect(FLAG_PROTECT_SET,
-		  CFG_MONITOR_BASE,
-		  CFG_MONITOR_BASE+monitor_flash_len-1,
+		  CONFIG_SYS_MONITOR_BASE,
+		  CONFIG_SYS_MONITOR_BASE+monitor_flash_len-1,
 		  &flash_info[0]);
 #endif
 
-#if (CFG_ENV_IS_IN_FLASH == 1) && defined(CFG_ENV_ADDR)
-# ifndef  CFG_ENV_SIZE
-#  define CFG_ENV_SIZE	CFG_ENV_SECT_SIZE
+#if defined(CONFIG_ENV_IS_IN_FLASH) && defined(CONFIG_ENV_ADDR)
+# ifndef  CONFIG_ENV_SIZE
+#  define CONFIG_ENV_SIZE	CONFIG_ENV_SECT_SIZE
 # endif
     flash_protect(FLAG_PROTECT_SET,
-		  CFG_ENV_ADDR,
-		  CFG_ENV_ADDR + CFG_ENV_SIZE - 1,
+		  CONFIG_ENV_ADDR,
+		  CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1,
 		  &flash_info[0]);
 #endif
 
-    return /*size*/ (CFG_FLASH0_SIZE * 1024 * 1024);
+    return /*size*/ (CONFIG_SYS_FLASH0_SIZE * 1024 * 1024);
 }
 
 /*-----------------------------------------------------------------------
@@ -258,7 +258,7 @@ int flash_erase (flash_info_t *info, int s_first, int s_last)
     last  = start;
     addr = (vu_long*)(info->start[l_sect]);
     while ((addr[0] & 0x80808080) != 0x80808080) {
-	if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+	if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
 	    printf ("Timeout\n");
 	    return 1;
 	}
@@ -381,7 +381,7 @@ static int write_word (flash_info_t *info, ulong dest, ulong data)
     /* data polling for D7 */
     start = get_timer (0);
     while ((*((vu_long *)dest) & 0x80808080) != (data & 0x80808080)) {
-	if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+	if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
 	    return (1);
 	}
     }
diff --git a/board/sbc8260/sbc8260.c b/board/sbc8260/sbc8260.c
index 5781f6281..f5f23be27 100644
--- a/board/sbc8260/sbc8260.c
+++ b/board/sbc8260/sbc8260.c
@@ -210,10 +210,10 @@ int checkboard (void)
 
 phys_size_t initdram (int board_type)
 {
-	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
 	volatile memctl8260_t *memctl = &immap->im_memctl;
-	volatile uchar c = 0, *ramaddr = (uchar *) (CFG_SDRAM_BASE + 0x8);
-	ulong psdmr = CFG_PSDMR;
+	volatile uchar c = 0, *ramaddr = (uchar *) (CONFIG_SYS_SDRAM_BASE + 0x8);
+	ulong psdmr = CONFIG_SYS_PSDMR;
 	int i;
 
 	/*
@@ -233,11 +233,11 @@ phys_size_t initdram (int board_type)
 	 *  accessing the SDRAM with a single-byte transaction."
 	 *
 	 * The appropriate BRx/ORx registers have already been set when we
-	 * get here. The SDRAM can be accessed at the address CFG_SDRAM_BASE.
+	 * get here. The SDRAM can be accessed at the address CONFIG_SYS_SDRAM_BASE.
 	 */
 
-	memctl->memc_psrt = CFG_PSRT;
-	memctl->memc_mptpr = CFG_MPTPR;
+	memctl->memc_psrt = CONFIG_SYS_PSRT;
+	memctl->memc_mptpr = CONFIG_SYS_MPTPR;
 
 	memctl->memc_psdmr = psdmr | PSDMR_OP_PREA;
 	*ramaddr = c;
@@ -253,15 +253,15 @@ phys_size_t initdram (int board_type)
 	*ramaddr = c;
 
 	/* return total ram size */
-	return (CFG_SDRAM0_SIZE * 1024 * 1024);
+	return (CONFIG_SYS_SDRAM0_SIZE * 1024 * 1024);
 }
 
 #ifdef CONFIG_MISC_INIT_R
 /* ------------------------------------------------------------------------- */
 int misc_init_r (void)
 {
-#ifdef CFG_LED_BASE
-	uchar ds = *(unsigned char *) (CFG_LED_BASE + 1);
+#ifdef CONFIG_SYS_LED_BASE
+	uchar ds = *(unsigned char *) (CONFIG_SYS_LED_BASE + 1);
 	uchar ss;
 	uchar tmp[64];
 	int res;
@@ -280,10 +280,10 @@ int misc_init_r (void)
 			tmp[17] = '\0';
 			setenv ("ethaddr", tmp);
 			/* set the led to show the address */
-			*((unsigned char *) (CFG_LED_BASE + 1)) = ds;
+			*((unsigned char *) (CONFIG_SYS_LED_BASE + 1)) = ds;
 		}
 	}
-#endif /* CFG_LED_BASE */
+#endif /* CONFIG_SYS_LED_BASE */
 	return (0);
 }
 #endif /* CONFIG_MISC_INIT_R */
diff --git a/board/sbc8349/pci.c b/board/sbc8349/pci.c
index 527f7e434..9022c55d5 100644
--- a/board/sbc8349/pci.c
+++ b/board/sbc8349/pci.c
@@ -40,8 +40,8 @@ DECLARE_GLOBAL_DATA_PTR;
 #ifdef CONFIG_PCI
 
 /* System RAM mapped to PCI space */
-#define CONFIG_PCI_SYS_MEM_BUS	CFG_SDRAM_BASE
-#define CONFIG_PCI_SYS_MEM_PHYS	CFG_SDRAM_BASE
+#define CONFIG_PCI_SYS_MEM_BUS	CONFIG_SYS_SDRAM_BASE
+#define CONFIG_PCI_SYS_MEM_PHYS	CONFIG_SYS_SDRAM_BASE
 
 #ifndef CONFIG_PCI_PNP
 static struct pci_config_table pci_mpc8349emds_config_table[] = {
@@ -90,7 +90,7 @@ pci_init_board(void)
 	u32 dev;
 	struct	pci_controller * hose;
 
-	immr = (immap_t *)CFG_IMMR;
+	immr = (immap_t *)CONFIG_SYS_IMMR;
 	clk = (clk83xx_t *)&immr->clk;
 	pci_law = immr->sysconf.pcilaw;
 	pci_pot = immr->ios.pot;
@@ -132,10 +132,10 @@ pci_init_board(void)
 	/*
 	 * Configure PCI Local Access Windows
 	 */
-	pci_law[0].bar = CFG_PCI1_MEM_PHYS & LAWBAR_BAR;
+	pci_law[0].bar = CONFIG_SYS_PCI1_MEM_PHYS & LAWBAR_BAR;
 	pci_law[0].ar = LAWAR_EN | LAWAR_SIZE_1G;
 
-	pci_law[1].bar = CFG_PCI1_IO_PHYS & LAWBAR_BAR;
+	pci_law[1].bar = CONFIG_SYS_PCI1_IO_PHYS & LAWBAR_BAR;
 	pci_law[1].ar = LAWAR_EN | LAWAR_SIZE_4M;
 
 	/*
@@ -143,18 +143,18 @@ pci_init_board(void)
 	 */
 
 	/* PCI1 mem space - prefetch */
-	pci_pot[0].potar = (CFG_PCI1_MEM_BASE >> 12) & POTAR_TA_MASK;
-	pci_pot[0].pobar = (CFG_PCI1_MEM_PHYS >> 12) & POBAR_BA_MASK;
+	pci_pot[0].potar = (CONFIG_SYS_PCI1_MEM_BASE >> 12) & POTAR_TA_MASK;
+	pci_pot[0].pobar = (CONFIG_SYS_PCI1_MEM_PHYS >> 12) & POBAR_BA_MASK;
 	pci_pot[0].pocmr = POCMR_EN | POCMR_PREFETCH_EN | (POCMR_CM_256M & POCMR_CM_MASK);
 
 	/* PCI1 IO space */
-	pci_pot[1].potar = (CFG_PCI1_IO_BASE >> 12) & POTAR_TA_MASK;
-	pci_pot[1].pobar = (CFG_PCI1_IO_PHYS >> 12) & POBAR_BA_MASK;
+	pci_pot[1].potar = (CONFIG_SYS_PCI1_IO_BASE >> 12) & POTAR_TA_MASK;
+	pci_pot[1].pobar = (CONFIG_SYS_PCI1_IO_PHYS >> 12) & POBAR_BA_MASK;
 	pci_pot[1].pocmr = POCMR_EN | POCMR_IO | (POCMR_CM_1M & POCMR_CM_MASK);
 
 	/* PCI1 mmio - non-prefetch mem space */
-	pci_pot[2].potar = (CFG_PCI1_MMIO_BASE >> 12) & POTAR_TA_MASK;
-	pci_pot[2].pobar = (CFG_PCI1_MMIO_PHYS >> 12) & POBAR_BA_MASK;
+	pci_pot[2].potar = (CONFIG_SYS_PCI1_MMIO_BASE >> 12) & POTAR_TA_MASK;
+	pci_pot[2].pobar = (CONFIG_SYS_PCI1_MMIO_PHYS >> 12) & POBAR_BA_MASK;
 	pci_pot[2].pocmr = POCMR_EN | (POCMR_CM_256M & POCMR_CM_MASK);
 
 	/*
@@ -173,23 +173,23 @@ pci_init_board(void)
 
 	/* PCI memory prefetch space */
 	pci_set_region(hose->regions + 0,
-		       CFG_PCI1_MEM_BASE,
-		       CFG_PCI1_MEM_PHYS,
-		       CFG_PCI1_MEM_SIZE,
+		       CONFIG_SYS_PCI1_MEM_BASE,
+		       CONFIG_SYS_PCI1_MEM_PHYS,
+		       CONFIG_SYS_PCI1_MEM_SIZE,
 		       PCI_REGION_MEM|PCI_REGION_PREFETCH);
 
 	/* PCI memory space */
 	pci_set_region(hose->regions + 1,
-		       CFG_PCI1_MMIO_BASE,
-		       CFG_PCI1_MMIO_PHYS,
-		       CFG_PCI1_MMIO_SIZE,
+		       CONFIG_SYS_PCI1_MMIO_BASE,
+		       CONFIG_SYS_PCI1_MMIO_PHYS,
+		       CONFIG_SYS_PCI1_MMIO_SIZE,
 		       PCI_REGION_MEM);
 
 	/* PCI IO space */
 	pci_set_region(hose->regions + 2,
-		       CFG_PCI1_IO_BASE,
-		       CFG_PCI1_IO_PHYS,
-		       CFG_PCI1_IO_SIZE,
+		       CONFIG_SYS_PCI1_IO_BASE,
+		       CONFIG_SYS_PCI1_IO_PHYS,
+		       CONFIG_SYS_PCI1_IO_SIZE,
 		       PCI_REGION_IO);
 
 	/* System memory space */
@@ -202,8 +202,8 @@ pci_init_board(void)
 	hose->region_count = 4;
 
 	pci_setup_indirect(hose,
-			   (CFG_IMMR+0x8300),
-			   (CFG_IMMR+0x8304));
+			   (CONFIG_SYS_IMMR+0x8300),
+			   (CONFIG_SYS_IMMR+0x8304));
 
 	pci_register_hose(hose);
 
@@ -239,18 +239,18 @@ pci_init_board(void)
 	 */
 
 	/* PCI2 mem space - prefetch */
-	pci_pot[3].potar = (CFG_PCI2_MEM_BASE >> 12) & POTAR_TA_MASK;
-	pci_pot[3].pobar = (CFG_PCI2_MEM_PHYS >> 12) & POBAR_BA_MASK;
+	pci_pot[3].potar = (CONFIG_SYS_PCI2_MEM_BASE >> 12) & POTAR_TA_MASK;
+	pci_pot[3].pobar = (CONFIG_SYS_PCI2_MEM_PHYS >> 12) & POBAR_BA_MASK;
 	pci_pot[3].pocmr = POCMR_EN | POCMR_PCI2 | POCMR_PREFETCH_EN | (POCMR_CM_256M & POCMR_CM_MASK);
 
 	/* PCI2 IO space */
-	pci_pot[4].potar = (CFG_PCI2_IO_BASE >> 12) & POTAR_TA_MASK;
-	pci_pot[4].pobar = (CFG_PCI2_IO_PHYS >> 12) & POBAR_BA_MASK;
+	pci_pot[4].potar = (CONFIG_SYS_PCI2_IO_BASE >> 12) & POTAR_TA_MASK;
+	pci_pot[4].pobar = (CONFIG_SYS_PCI2_IO_PHYS >> 12) & POBAR_BA_MASK;
 	pci_pot[4].pocmr = POCMR_EN | POCMR_PCI2 | POCMR_IO | (POCMR_CM_1M & POCMR_CM_MASK);
 
 	/* PCI2 mmio - non-prefetch mem space */
-	pci_pot[5].potar = (CFG_PCI2_MMIO_BASE >> 12) & POTAR_TA_MASK;
-	pci_pot[5].pobar = (CFG_PCI2_MMIO_PHYS >> 12) & POBAR_BA_MASK;
+	pci_pot[5].potar = (CONFIG_SYS_PCI2_MMIO_BASE >> 12) & POTAR_TA_MASK;
+	pci_pot[5].pobar = (CONFIG_SYS_PCI2_MMIO_PHYS >> 12) & POBAR_BA_MASK;
 	pci_pot[5].pocmr = POCMR_EN | POCMR_PCI2 | (POCMR_CM_256M & POCMR_CM_MASK);
 
 	/*
@@ -269,23 +269,23 @@ pci_init_board(void)
 
 	/* PCI memory prefetch space */
 	pci_set_region(hose->regions + 0,
-		       CFG_PCI2_MEM_BASE,
-		       CFG_PCI2_MEM_PHYS,
-		       CFG_PCI2_MEM_SIZE,
+		       CONFIG_SYS_PCI2_MEM_BASE,
+		       CONFIG_SYS_PCI2_MEM_PHYS,
+		       CONFIG_SYS_PCI2_MEM_SIZE,
 		       PCI_REGION_MEM|PCI_REGION_PREFETCH);
 
 	/* PCI memory space */
 	pci_set_region(hose->regions + 1,
-		       CFG_PCI2_MMIO_BASE,
-		       CFG_PCI2_MMIO_PHYS,
-		       CFG_PCI2_MMIO_SIZE,
+		       CONFIG_SYS_PCI2_MMIO_BASE,
+		       CONFIG_SYS_PCI2_MMIO_PHYS,
+		       CONFIG_SYS_PCI2_MMIO_SIZE,
 		       PCI_REGION_MEM);
 
 	/* PCI IO space */
 	pci_set_region(hose->regions + 2,
-		       CFG_PCI2_IO_BASE,
-		       CFG_PCI2_IO_PHYS,
-		       CFG_PCI2_IO_SIZE,
+		       CONFIG_SYS_PCI2_IO_BASE,
+		       CONFIG_SYS_PCI2_IO_PHYS,
+		       CONFIG_SYS_PCI2_IO_SIZE,
 		       PCI_REGION_IO);
 
 	/* System memory space */
@@ -298,8 +298,8 @@ pci_init_board(void)
 	hose->region_count = 4;
 
 	pci_setup_indirect(hose,
-			   (CFG_IMMR+0x8380),
-			   (CFG_IMMR+0x8384));
+			   (CONFIG_SYS_IMMR+0x8380),
+			   (CONFIG_SYS_IMMR+0x8384));
 
 	pci_register_hose(hose);
 
diff --git a/board/sbc8349/sbc8349.c b/board/sbc8349/sbc8349.c
index 4a44fda31..e01cb037f 100644
--- a/board/sbc8349/sbc8349.c
+++ b/board/sbc8349/sbc8349.c
@@ -54,14 +54,14 @@ int board_early_init_f (void)
 
 phys_size_t initdram (int board_type)
 {
-	volatile immap_t *im = (immap_t *)CFG_IMMR;
+	volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
 	u32 msize = 0;
 
 	if ((im->sysconf.immrbar & IMMRBAR_BASE_ADDR) != (u32)im)
 		return -1;
 
 	/* DDR SDRAM - Main SODIMM */
-	im->sysconf.ddrlaw[0].bar = CFG_DDR_BASE & LAWBAR_BAR;
+	im->sysconf.ddrlaw[0].bar = CONFIG_SYS_DDR_BASE & LAWBAR_BAR;
 #if defined(CONFIG_SPD_EEPROM)
 	msize = spd_sdram();
 #else
@@ -88,12 +88,12 @@ phys_size_t initdram (int board_type)
  ************************************************************************/
 int fixed_sdram(void)
 {
-	volatile immap_t *im = (immap_t *)CFG_IMMR;
+	volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
 	u32 msize = 0;
 	u32 ddr_size;
 	u32 ddr_size_log2;
 
-	msize = CFG_DDR_SIZE;
+	msize = CONFIG_SYS_DDR_SIZE;
 	for (ddr_size = msize << 20, ddr_size_log2 = 0;
 	     (ddr_size > 1);
 	     ddr_size = ddr_size>>1, ddr_size_log2++) {
@@ -101,22 +101,22 @@ int fixed_sdram(void)
 			return -1;
 		}
 	}
-	im->sysconf.ddrlaw[0].bar = ((CFG_DDR_SDRAM_BASE>>12) & 0xfffff);
+	im->sysconf.ddrlaw[0].bar = CONFIG_SYS_DDR_SDRAM_BASE & 0xfffff000;
 	im->sysconf.ddrlaw[0].ar = LAWAR_EN | ((ddr_size_log2 - 1) & LAWAR_SIZE);
 
-#if (CFG_DDR_SIZE != 256)
+#if (CONFIG_SYS_DDR_SIZE != 256)
 #warning Currently any ddr size other than 256 is not supported
 #endif
 	im->ddr.csbnds[2].csbnds = 0x0000000f;
-	im->ddr.cs_config[2] = CFG_DDR_CONFIG;
+	im->ddr.cs_config[2] = CONFIG_SYS_DDR_CONFIG;
 
 	/* currently we use only one CS, so disable the other banks */
 	im->ddr.cs_config[0] = 0;
 	im->ddr.cs_config[1] = 0;
 	im->ddr.cs_config[3] = 0;
 
-	im->ddr.timing_cfg_1 = CFG_DDR_TIMING_1;
-	im->ddr.timing_cfg_2 = CFG_DDR_TIMING_2;
+	im->ddr.timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1;
+	im->ddr.timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2;
 
 	im->ddr.sdram_cfg =
 		SDRAM_CFG_SREN
@@ -128,16 +128,16 @@ int fixed_sdram(void)
 	/* for 32-bit mode burst length is 8 */
 	im->ddr.sdram_cfg |= (SDRAM_CFG_32_BE | SDRAM_CFG_8_BE);
 #endif
-	im->ddr.sdram_mode = CFG_DDR_MODE;
+	im->ddr.sdram_mode = CONFIG_SYS_DDR_MODE;
 
-	im->ddr.sdram_interval = CFG_DDR_INTERVAL;
+	im->ddr.sdram_interval = CONFIG_SYS_DDR_INTERVAL;
 	udelay(200);
 
 	/* enable DDR controller */
 	im->ddr.sdram_cfg |= SDRAM_CFG_MEM_EN;
 	return msize;
 }
-#endif/*!CFG_SPD_EEPROM*/
+#endif/*!CONFIG_SYS_SPD_EEPROM*/
 
 
 int checkboard (void)
@@ -149,44 +149,44 @@ int checkboard (void)
 /*
  * if board is fitted with SDRAM
  */
-#if defined(CFG_BR2_PRELIM)  \
-	&& defined(CFG_OR2_PRELIM) \
-	&& defined(CFG_LBLAWBAR2_PRELIM) \
-	&& defined(CFG_LBLAWAR2_PRELIM)
+#if defined(CONFIG_SYS_BR2_PRELIM)  \
+	&& defined(CONFIG_SYS_OR2_PRELIM) \
+	&& defined(CONFIG_SYS_LBLAWBAR2_PRELIM) \
+	&& defined(CONFIG_SYS_LBLAWAR2_PRELIM)
 /*
  * Initialize SDRAM memory on the Local Bus.
  */
 
 void sdram_init(void)
 {
-	volatile immap_t *immap = (immap_t *)CFG_IMMR;
-	volatile lbus83xx_t *lbc= &immap->lbus;
-	uint *sdram_addr = (uint *)CFG_LBC_SDRAM_BASE;
+	volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR;
+	volatile fsl_lbus_t *lbc = &immap->lbus;
+	uint *sdram_addr = (uint *)CONFIG_SYS_LBC_SDRAM_BASE;
 
 	puts("\n   SDRAM on Local Bus: ");
-	print_size (CFG_LBC_SDRAM_SIZE * 1024 * 1024, "\n");
+	print_size (CONFIG_SYS_LBC_SDRAM_SIZE * 1024 * 1024, "\n");
 
 	/*
 	 * Setup SDRAM Base and Option Registers, already done in cpu_init.c
 	 */
 
 	/* setup mtrpt, lsrt and lbcr for LB bus */
-	lbc->lbcr = CFG_LBC_LBCR;
-	lbc->mrtpr = CFG_LBC_MRTPR;
-	lbc->lsrt = CFG_LBC_LSRT;
+	lbc->lbcr = CONFIG_SYS_LBC_LBCR;
+	lbc->mrtpr = CONFIG_SYS_LBC_MRTPR;
+	lbc->lsrt = CONFIG_SYS_LBC_LSRT;
 	asm("sync");
 
 	/*
 	 * Configure the SDRAM controller Machine Mode Register.
 	 */
-	lbc->lsdmr = CFG_LBC_LSDMR_5; /* 0x40636733; normal operation */
+	lbc->lsdmr = CONFIG_SYS_LBC_LSDMR_5; /* 0x40636733; normal operation */
 
-	lbc->lsdmr = CFG_LBC_LSDMR_1; /* 0x68636733; precharge all the banks */
+	lbc->lsdmr = CONFIG_SYS_LBC_LSDMR_1; /* 0x68636733; precharge all the banks */
 	asm("sync");
 	*sdram_addr = 0xff;
 	udelay(100);
 
-	lbc->lsdmr = CFG_LBC_LSDMR_2; /* 0x48636733; auto refresh */
+	lbc->lsdmr = CONFIG_SYS_LBC_LSDMR_2; /* 0x48636733; auto refresh */
 	asm("sync");
 	/*1 times*/
 	*sdram_addr = 0xff;
@@ -214,12 +214,12 @@ void sdram_init(void)
 	udelay(100);
 
 	/* 0x58636733; mode register write operation */
-	lbc->lsdmr = CFG_LBC_LSDMR_4;
+	lbc->lsdmr = CONFIG_SYS_LBC_LSDMR_4;
 	asm("sync");
 	*sdram_addr = 0xff;
 	udelay(100);
 
-	lbc->lsdmr = CFG_LBC_LSDMR_5; /* 0x40636733; normal operation */
+	lbc->lsdmr = CONFIG_SYS_LBC_LSDMR_5; /* 0x40636733; normal operation */
 	asm("sync");
 	*sdram_addr = 0xff;
 	udelay(100);
diff --git a/board/sbc8548/ddr.c b/board/sbc8548/ddr.c
index f07d746c2..ab64fa88f 100644
--- a/board/sbc8548/ddr.c
+++ b/board/sbc8548/ddr.c
@@ -10,6 +10,7 @@
 #include <i2c.h>
 
 #include <asm/fsl_ddr_sdram.h>
+#include <asm/fsl_ddr_dimm_params.h>
 
 static void
 get_spd(ddr2_spd_eeprom_t *spd, unsigned char i2c_address)
@@ -37,7 +38,9 @@ void fsl_ddr_get_spd(ddr2_spd_eeprom_t *ctrl_dimms_spd,
 	}
 }
 
-void fsl_ddr_board_options(memctl_options_t *popts, unsigned int ctrl_num)
+void fsl_ddr_board_options(memctl_options_t *popts,
+				dimm_params_t *pdimm,
+				unsigned int ctrl_num)
 {
 	/*
 	 * Factors to consider for clock adjust:
diff --git a/board/sbc8548/law.c b/board/sbc8548/law.c
index ab54260b0..e8c7ae2a2 100644
--- a/board/sbc8548/law.c
+++ b/board/sbc8548/law.c
@@ -46,12 +46,12 @@
 
 struct law_entry law_table[] = {
 #ifndef CONFIG_SPD_EEPROM
-	SET_LAW(CFG_DDR_SDRAM_BASE, LAW_SIZE_256M, LAW_TRGT_IF_DDR),
+	SET_LAW(CONFIG_SYS_DDR_SDRAM_BASE, LAW_SIZE_256M, LAW_TRGT_IF_DDR),
 #endif
-	SET_LAW(CFG_PCI1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI),
-	SET_LAW(CFG_PCI1_IO_PHYS, LAW_SIZE_16M, LAW_TRGT_IF_PCI),
+	SET_LAW(CONFIG_SYS_PCI1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI),
+	SET_LAW(CONFIG_SYS_PCI1_IO_PHYS, LAW_SIZE_16M, LAW_TRGT_IF_PCI),
 	/* LBC window - maps 256M 0xf0000000 -> 0xffffffff */
-	SET_LAW(CFG_LBC_SDRAM_BASE, LAW_SIZE_256M, LAW_TRGT_IF_LBC),
+	SET_LAW(CONFIG_SYS_LBC_SDRAM_BASE, LAW_SIZE_256M, LAW_TRGT_IF_LBC),
 };
 
 int num_law_entries = ARRAY_SIZE(law_table);
diff --git a/board/sbc8548/sbc8548.c b/board/sbc8548/sbc8548.c
index f31d7d647..8c073cb4b 100644
--- a/board/sbc8548/sbc8548.c
+++ b/board/sbc8548/sbc8548.c
@@ -36,10 +36,6 @@
 #include <libfdt.h>
 #include <fdt_support.h>
 
-#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
-extern void ddr_enable_ecc(unsigned int dram_size);
-#endif
-
 DECLARE_GLOBAL_DATA_PTR;
 
 void local_bus_init(void);
@@ -53,9 +49,9 @@ int board_early_init_f (void)
 
 int checkboard (void)
 {
-	volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR);
-	volatile ccsr_local_ecm_t *ecm = (void *)(CFG_MPC85xx_ECM_ADDR);
-	volatile u_char *rev= (void *)CFG_BD_REV;
+	volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+	volatile ccsr_local_ecm_t *ecm = (void *)(CONFIG_SYS_MPC85xx_ECM_ADDR);
+	volatile u_char *rev= (void *)CONFIG_SYS_BD_REV;
 
 	printf ("Board: Wind River SBC8548 Rev. 0x%01x\n",
 			(*rev) >> 4);
@@ -66,13 +62,6 @@ int checkboard (void)
 	local_bus_init ();
 
 	/*
-	 * Fix CPU2 errata: A core hang possible while executing a
-	 * msync instruction and a snoopable transaction from an I/O
-	 * master tagged to make quick forward progress is present.
-	 */
-	ecm->eebpcr |= (1 << 16);
-
-	/*
 	 * Hack TSEC 3 and 4 IO voltages.
 	 */
 	gur->tsec34ioovcr = 0xe7e0;	/*  1110 0111 1110 0xxx */
@@ -98,7 +87,7 @@ initdram(int board_type)
 		 *    Override DLL = 1, Course Adj = 1, Tap Select = 0
 		 */
 
-		volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR);
+		volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
 
 		gur->ddrdllcr = 0x81000000;
 		asm("sync;isync;msync");
@@ -114,12 +103,6 @@ initdram(int board_type)
 	dram_size = fixed_sdram ();
 #endif
 
-#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
-	/*
-	 * Initialize and enable DDR ECC.
-	 */
-	ddr_enable_ecc(dram_size);
-#endif
 	/*
 	 * SDRAM Initialization
 	 */
@@ -135,8 +118,8 @@ initdram(int board_type)
 void
 local_bus_init(void)
 {
-	volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR);
-	volatile ccsr_lbc_t *lbc = (void *)(CFG_MPC85xx_LBC_ADDR);
+	volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+	volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR);
 
 	uint clkdiv;
 	uint lbc_hz;
@@ -169,44 +152,44 @@ local_bus_init(void)
 void
 sdram_init(void)
 {
-#if defined(CFG_OR3_PRELIM) && defined(CFG_BR3_PRELIM)
+#if defined(CONFIG_SYS_OR3_PRELIM) && defined(CONFIG_SYS_BR3_PRELIM)
 
 	uint idx;
-	volatile ccsr_lbc_t *lbc = (void *)(CFG_MPC85xx_LBC_ADDR);
-	uint *sdram_addr = (uint *)CFG_LBC_SDRAM_BASE;
+	volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR);
+	uint *sdram_addr = (uint *)CONFIG_SYS_LBC_SDRAM_BASE;
 	uint lsdmr_common;
 
 	puts("    SDRAM: ");
 
-	print_size (CFG_LBC_SDRAM_SIZE * 1024 * 1024, "\n");
+	print_size (CONFIG_SYS_LBC_SDRAM_SIZE * 1024 * 1024, "\n");
 
 	/*
 	 * Setup SDRAM Base and Option Registers
 	 */
-	lbc->or3 = CFG_OR3_PRELIM;
+	lbc->or3 = CONFIG_SYS_OR3_PRELIM;
 	asm("msync");
 
-	lbc->br3 = CFG_BR3_PRELIM;
+	lbc->br3 = CONFIG_SYS_BR3_PRELIM;
 	asm("msync");
 
-	lbc->lbcr = CFG_LBC_LBCR;
+	lbc->lbcr = CONFIG_SYS_LBC_LBCR;
 	asm("msync");
 
 
-	lbc->lsrt = CFG_LBC_LSRT;
-	lbc->mrtpr = CFG_LBC_MRTPR;
+	lbc->lsrt = CONFIG_SYS_LBC_LSRT;
+	lbc->mrtpr = CONFIG_SYS_LBC_MRTPR;
 	asm("msync");
 
 	/*
 	 * MPC8548 uses "new" 15-16 style addressing.
 	 */
-	lsdmr_common = CFG_LBC_LSDMR_COMMON;
-	lsdmr_common |= CFG_LBC_LSDMR_BSMA1516;
+	lsdmr_common = CONFIG_SYS_LBC_LSDMR_COMMON;
+	lsdmr_common |= CONFIG_SYS_LBC_LSDMR_BSMA1516;
 
 	/*
 	 * Issue PRECHARGE ALL command.
 	 */
-	lbc->lsdmr = lsdmr_common | CFG_LBC_LSDMR_OP_PCHALL;
+	lbc->lsdmr = lsdmr_common | CONFIG_SYS_LBC_LSDMR_OP_PCHALL;
 	asm("sync;msync");
 	*sdram_addr = 0xff;
 	ppcDcbf((unsigned long) sdram_addr);
@@ -216,7 +199,7 @@ sdram_init(void)
 	 * Issue 8 AUTO REFRESH commands.
 	 */
 	for (idx = 0; idx < 8; idx++) {
-		lbc->lsdmr = lsdmr_common | CFG_LBC_LSDMR_OP_ARFRSH;
+		lbc->lsdmr = lsdmr_common | CONFIG_SYS_LBC_LSDMR_OP_ARFRSH;
 		asm("sync;msync");
 		*sdram_addr = 0xff;
 		ppcDcbf((unsigned long) sdram_addr);
@@ -226,7 +209,7 @@ sdram_init(void)
 	/*
 	 * Issue 8 MODE-set command.
 	 */
-	lbc->lsdmr = lsdmr_common | CFG_LBC_LSDMR_OP_MRW;
+	lbc->lsdmr = lsdmr_common | CONFIG_SYS_LBC_LSDMR_OP_MRW;
 	asm("sync;msync");
 	*sdram_addr = 0xff;
 	ppcDcbf((unsigned long) sdram_addr);
@@ -235,7 +218,7 @@ sdram_init(void)
 	/*
 	 * Issue NORMAL OP command.
 	 */
-	lbc->lsdmr = lsdmr_common | CFG_LBC_LSDMR_OP_NORMAL;
+	lbc->lsdmr = lsdmr_common | CONFIG_SYS_LBC_LSDMR_OP_NORMAL;
 	asm("sync;msync");
 	*sdram_addr = 0xff;
 	ppcDcbf((unsigned long) sdram_addr);
@@ -244,17 +227,17 @@ sdram_init(void)
 #endif	/* enable SDRAM init */
 }
 
-#if defined(CFG_DRAM_TEST)
+#if defined(CONFIG_SYS_DRAM_TEST)
 int
 testdram(void)
 {
-	uint *pstart = (uint *) CFG_MEMTEST_START;
-	uint *pend = (uint *) CFG_MEMTEST_END;
+	uint *pstart = (uint *) CONFIG_SYS_MEMTEST_START;
+	uint *pend = (uint *) CONFIG_SYS_MEMTEST_END;
 	uint *p;
 
 	printf("Testing DRAM from 0x%08x to 0x%08x\n",
-	       CFG_MEMTEST_START,
-	       CFG_MEMTEST_END);
+	       CONFIG_SYS_MEMTEST_START,
+	       CONFIG_SYS_MEMTEST_END);
 
 	printf("DRAM test phase 1:\n");
 	for (p = pstart; p < pend; p++)
@@ -290,9 +273,9 @@ testdram(void)
  ************************************************************************/
 long int fixed_sdram (void)
 {
-    #define CFG_DDR_CONTROL 0xc300c000
+    #define CONFIG_SYS_DDR_CONTROL 0xc300c000
 
-	volatile ccsr_ddr_t *ddr = (void *)(CFG_MPC85xx_DDR_ADDR);
+	volatile ccsr_ddr_t *ddr = (void *)(CONFIG_SYS_MPC85xx_DDR_ADDR);
 
 	ddr->cs0_bnds		= 0x0000007f;
 	ddr->cs1_bnds		= 0x008000ff;
@@ -319,12 +302,12 @@ long int fixed_sdram (void)
 
 	#if defined (CONFIG_DDR_ECC)
 	  /* Enable ECC checking */
-	  ddr->sdram_cfg = (CFG_DDR_CONTROL | 0x20000000);
+	  ddr->sdram_cfg = (CONFIG_SYS_DDR_CONTROL | 0x20000000);
 	#else
-	  ddr->sdram_cfg = CFG_DDR_CONTROL;
+	  ddr->sdram_cfg = CONFIG_SYS_DDR_CONTROL;
 	#endif
 
-	return CFG_SDRAM_SIZE * 1024 * 1024;
+	return CONFIG_SYS_SDRAM_SIZE * 1024 * 1024;
 }
 #endif
 
@@ -364,17 +347,20 @@ static struct pci_controller pcie1_hose;
 
 int first_free_busno=0;
 
+extern int fsl_pci_setup_inbound_windows(struct pci_region *r);
+extern void fsl_pci_init(struct pci_controller *hose);
+
 void
 pci_init_board(void)
 {
-	volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR);
+	volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
 
 #ifdef CONFIG_PCI1
 {
-	volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CFG_PCI1_ADDR;
-	extern void fsl_pci_init(struct pci_controller *hose);
+	volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCI1_ADDR;
 	struct pci_controller *hose = &pci1_hose;
 	struct pci_config_table *table;
+	struct pci_region *r = hose->regions;
 
 	uint pci_32 = gur->pordevsr & MPC85xx_PORDEVSR_PCI1_PCI32;	/* PORDEVSR[15] */
 	uint pci_arb = gur->pordevsr & MPC85xx_PORDEVSR_PCI1_ARB;	/* PORDEVSR[14] */
@@ -396,27 +382,22 @@ pci_init_board(void)
 
 
 		/* inbound */
-		pci_set_region(hose->regions + 0,
-			       CFG_PCI_MEMORY_BUS,
-			       CFG_PCI_MEMORY_PHYS,
-			       CFG_PCI_MEMORY_SIZE,
-			       PCI_REGION_MEM | PCI_REGION_MEMORY);
-
+		r += fsl_pci_setup_inbound_windows(r);
 
 		/* outbound memory */
-		pci_set_region(hose->regions + 1,
-			       CFG_PCI1_MEM_BASE,
-			       CFG_PCI1_MEM_PHYS,
-			       CFG_PCI1_MEM_SIZE,
+		pci_set_region(r++,
+			       CONFIG_SYS_PCI1_MEM_BASE,
+			       CONFIG_SYS_PCI1_MEM_PHYS,
+			       CONFIG_SYS_PCI1_MEM_SIZE,
 			       PCI_REGION_MEM);
 
 		/* outbound io */
-		pci_set_region(hose->regions + 2,
-			       CFG_PCI1_IO_BASE,
-			       CFG_PCI1_IO_PHYS,
-			       CFG_PCI1_IO_SIZE,
+		pci_set_region(r++,
+			       CONFIG_SYS_PCI1_IO_BASE,
+			       CONFIG_SYS_PCI1_IO_PHYS,
+			       CONFIG_SYS_PCI1_IO_SIZE,
 			       PCI_REGION_IO);
-		hose->region_count = 3;
+		hose->region_count = r - hose->regions;
 
 		/* relocate config table pointers */
 		hose->config_table = \
@@ -431,7 +412,7 @@ pci_init_board(void)
 		first_free_busno=hose->last_busno+1;
 		printf ("PCI on bus %02x - %02x\n",hose->first_busno,hose->last_busno);
 #ifdef CONFIG_PCIX_CHECK
-		if (!(gur->pordevsr & PORDEVSR_PCI)) {
+		if (!(gur->pordevsr & MPC85xx_PORDEVSR_PCI1)) {
 			/* PCI-X init */
 			if (CONFIG_SYS_CLK_FREQ < 66000000)
 				printf("PCI-X will only work at 66 MHz\n");
@@ -466,10 +447,10 @@ pci_init_board(void)
 
 #ifdef CONFIG_PCIE1
 {
-	volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CFG_PCIE1_ADDR;
-	extern void fsl_pci_init(struct pci_controller *hose);
+	volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCIE1_ADDR;
 	struct pci_controller *hose = &pcie1_hose;
 	int pcie_ep =  (host_agent == 0) || (host_agent == 2 ) || (host_agent == 3);
+	struct pci_region *r = hose->regions;
 
 	int pcie_configured  = io_sel >= 1;
 
@@ -485,27 +466,27 @@ pci_init_board(void)
 		printf ("\n");
 
 		/* inbound */
-		pci_set_region(hose->regions + 0,
-			       CFG_PCI_MEMORY_BUS,
-			       CFG_PCI_MEMORY_PHYS,
-			       CFG_PCI_MEMORY_SIZE,
+		pci_set_region(r++,
+			       CONFIG_SYS_PCI_MEMORY_BUS,
+			       CONFIG_SYS_PCI_MEMORY_PHYS,
+			       CONFIG_SYS_PCI_MEMORY_SIZE,
 			       PCI_REGION_MEM | PCI_REGION_MEMORY);
 
 		/* outbound memory */
-		pci_set_region(hose->regions + 1,
-			       CFG_PCIE1_MEM_BASE,
-			       CFG_PCIE1_MEM_PHYS,
-			       CFG_PCIE1_MEM_SIZE,
+		pci_set_region(r++,
+			       CONFIG_SYS_PCIE1_MEM_BASE,
+			       CONFIG_SYS_PCIE1_MEM_PHYS,
+			       CONFIG_SYS_PCIE1_MEM_SIZE,
 			       PCI_REGION_MEM);
 
 		/* outbound io */
-		pci_set_region(hose->regions + 2,
-			       CFG_PCIE1_IO_BASE,
-			       CFG_PCIE1_IO_PHYS,
-			       CFG_PCIE1_IO_SIZE,
+		pci_set_region(r++,
+			       CONFIG_SYS_PCIE1_IO_BASE,
+			       CONFIG_SYS_PCIE1_IO_PHYS,
+			       CONFIG_SYS_PCIE1_IO_SIZE,
 			       PCI_REGION_IO);
 
-		hose->region_count = 3;
+		hose->region_count = r - hose->regions;
 
 		hose->first_busno=first_free_busno;
 		pci_setup_indirect(hose, (int) &pci->cfg_addr, (int) &pci->cfg_data);
@@ -531,41 +512,17 @@ int last_stage_init(void)
 }
 
 #if defined(CONFIG_OF_BOARD_SETUP)
-void
-ft_pci_setup(void *blob, bd_t *bd)
-{
-	int node, tmp[2];
+extern void ft_fsl_pci_setup(void *blob, const char *pci_alias,
+			struct pci_controller *hose);
 
-	node = fdt_path_offset(blob, "/aliases");
-	tmp[0] = 0;
-	if (node >= 0) {
+void ft_board_setup(void *blob, bd_t *bd)
+{
+	ft_cpu_setup(blob, bd);
 #ifdef CONFIG_PCI1
-		const char *path;
-		path = fdt_getprop(blob, node, "pci0", NULL);
-		if (path) {
-			tmp[1] = pci1_hose.last_busno - pci1_hose.first_busno;
-			do_fixup_by_path(blob, path, "bus-range", &tmp, 8, 1);
-		}
+	ft_fsl_pci_setup(blob, "pci0", &pci1_hose);
 #endif
 #ifdef CONFIG_PCIE1
-		const char *path;
-		path = fdt_getprop(blob, node, "pci1", NULL);
-		if (path) {
-			tmp[1] = pcie1_hose.last_busno - pcie1_hose.first_busno;
-			do_fixup_by_path(blob, path, "bus-range", &tmp, 8, 1);
-		}
-#endif
-	}
-}
-#endif
-
-#if defined(CONFIG_OF_BOARD_SETUP)
-void
-ft_board_setup(void *blob, bd_t *bd)
-{
-	ft_cpu_setup(blob, bd);
-#ifdef CONFIG_PCI
-	ft_pci_setup(blob, bd);
+	ft_fsl_pci_setup(blob, "pci1", &pcie1_hose);
 #endif
 }
 #endif
diff --git a/board/sbc8548/tlb.c b/board/sbc8548/tlb.c
index 6314005ca..18d11f6dc 100644
--- a/board/sbc8548/tlb.c
+++ b/board/sbc8548/tlb.c
@@ -28,16 +28,16 @@
 
 struct fsl_e_tlb_entry tlb_table[] = {
 	/* TLB 0 - for temp stack in cache */
-	SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR, CFG_INIT_RAM_ADDR,
+	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR, CONFIG_SYS_INIT_RAM_ADDR,
 		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
 		      0, 0, BOOKE_PAGESZ_4K, 0),
-	SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR + 4 * 1024 , CFG_INIT_RAM_ADDR + 4 * 1024,
+	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024 , CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024,
 		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
 		      0, 0, BOOKE_PAGESZ_4K, 0),
-	SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR + 8 * 1024 , CFG_INIT_RAM_ADDR + 8 * 1024,
+	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024 , CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024,
 		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
 		      0, 0, BOOKE_PAGESZ_4K, 0),
-	SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR + 12 * 1024 , CFG_INIT_RAM_ADDR + 12 * 1024,
+	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024 , CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024,
 		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
 		      0, 0, BOOKE_PAGESZ_4K, 0),
 
@@ -46,7 +46,7 @@ struct fsl_e_tlb_entry tlb_table[] = {
 	 * 0xff800000	16M	TLB for 8MB FLASH
 	 * Out of reset this entry is only 4K.
 	 */
-	SET_TLB_ENTRY(1, CFG_FLASH_BASE, CFG_FLASH_BASE,
+	SET_TLB_ENTRY(1, CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE,
 		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 		      0, 0, BOOKE_PAGESZ_16M, 1),
 
@@ -54,7 +54,7 @@ struct fsl_e_tlb_entry tlb_table[] = {
 	 * TLB 1:	256M	Non-cacheable, guarded
 	 * 0x80000000	256M	PCI1 MEM First half
 	 */
-	SET_TLB_ENTRY(1, CFG_PCI1_MEM_PHYS, CFG_PCI1_MEM_PHYS,
+	SET_TLB_ENTRY(1, CONFIG_SYS_PCI1_MEM_PHYS, CONFIG_SYS_PCI1_MEM_PHYS,
 		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 		      0, 1, BOOKE_PAGESZ_256M, 1),
 
@@ -62,7 +62,7 @@ struct fsl_e_tlb_entry tlb_table[] = {
 	 * TLB 2:	256M	Non-cacheable, guarded
 	 * 0x90000000	256M	PCI1 MEM Second half
 	 */
-	SET_TLB_ENTRY(1, CFG_PCI1_MEM_PHYS + 0x10000000, CFG_PCI1_MEM_PHYS + 0x10000000,
+	SET_TLB_ENTRY(1, CONFIG_SYS_PCI1_MEM_PHYS + 0x10000000, CONFIG_SYS_PCI1_MEM_PHYS + 0x10000000,
 		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 		      0, 2, BOOKE_PAGESZ_256M, 1),
 
@@ -71,7 +71,7 @@ struct fsl_e_tlb_entry tlb_table[] = {
 	 * 0x0		256M DDR SDRAM
 	 */
 	#if !defined(CONFIG_SPD_EEPROM)
-	SET_TLB_ENTRY(1, CFG_DDR_SDRAM_BASE, CFG_DDR_SDRAM_BASE,
+	SET_TLB_ENTRY(1, CONFIG_SYS_DDR_SDRAM_BASE, CONFIG_SYS_DDR_SDRAM_BASE,
 		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
 		      0, 3, BOOKE_PAGESZ_256M, 1),
 	#endif
@@ -81,7 +81,7 @@ struct fsl_e_tlb_entry tlb_table[] = {
 	 * 0xe0000000	1M	CCSRBAR
 	 * 0xe2000000	16M	PCI1 IO
 	 */
-	SET_TLB_ENTRY(1, CFG_CCSRBAR, CFG_CCSRBAR_PHYS,
+	SET_TLB_ENTRY(1, CONFIG_SYS_CCSRBAR, CONFIG_SYS_CCSRBAR_PHYS,
 		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 		      0, 4, BOOKE_PAGESZ_64M, 1),
 
@@ -89,7 +89,7 @@ struct fsl_e_tlb_entry tlb_table[] = {
 	 * TLB 5:	64M	Cacheable, non-guarded
 	 * 0xf0000000	64M	LBC SDRAM
 	 */
-	SET_TLB_ENTRY(1, CFG_LBC_SDRAM_BASE, CFG_LBC_SDRAM_BASE,
+	SET_TLB_ENTRY(1, CONFIG_SYS_LBC_SDRAM_BASE, CONFIG_SYS_LBC_SDRAM_BASE,
 		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
 		      0, 5, BOOKE_PAGESZ_64M, 1),
 
@@ -100,7 +100,7 @@ struct fsl_e_tlb_entry tlb_table[] = {
 	 * 0xf8300000	1M	Board revision
 	 * 0xf8b00000	1M	EEPROM
 	 */
-	SET_TLB_ENTRY(1, CFG_EPLD_BASE, CFG_EPLD_BASE,
+	SET_TLB_ENTRY(1, CONFIG_SYS_EPLD_BASE, CONFIG_SYS_EPLD_BASE,
 		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 		      0, 6, BOOKE_PAGESZ_16M, 1),
 };
diff --git a/board/sbc8548/u-boot.lds b/board/sbc8548/u-boot.lds
index eba7e8a9d..70d11f265 100644
--- a/board/sbc8548/u-boot.lds
+++ b/board/sbc8548/u-boot.lds
@@ -140,6 +140,7 @@ SECTIONS
    *(.dynbss)
    *(.bss)
    *(COMMON)
+   . = ALIGN(4);
   }
   _end = . ;
   PROVIDE (end = .);
diff --git a/board/sbc8560/ddr.c b/board/sbc8560/ddr.c
index 45372f427..7850794d6 100644
--- a/board/sbc8560/ddr.c
+++ b/board/sbc8560/ddr.c
@@ -10,6 +10,7 @@
 #include <i2c.h>
 
 #include <asm/fsl_ddr_sdram.h>
+#include <asm/fsl_ddr_dimm_params.h>
 
 static void
 get_spd(ddr1_spd_eeprom_t *spd, unsigned char i2c_address)
@@ -40,7 +41,9 @@ fsl_ddr_get_spd(ddr1_spd_eeprom_t *ctrl_dimms_spd,
 	}
 }
 
-void fsl_ddr_board_options(memctl_options_t *popts, unsigned int ctrl_num)
+void fsl_ddr_board_options(memctl_options_t *popts,
+				dimm_params_t *pdimm,
+				unsigned int ctrl_num)
 {
 	/*
 	 * Factors to consider for CPO:
diff --git a/board/sbc8560/law.c b/board/sbc8560/law.c
index 10dedb481..4e6baed2f 100644
--- a/board/sbc8560/law.c
+++ b/board/sbc8560/law.c
@@ -51,10 +51,10 @@
 
 struct law_entry law_table[] = {
 #ifndef CONFIG_SPD_EEPROM
-	SET_LAW(CFG_DDR_SDRAM_BASE, LAW_SIZE_512M, LAW_TRGT_IF_DDR),
+	SET_LAW(CONFIG_SYS_DDR_SDRAM_BASE, LAW_SIZE_512M, LAW_TRGT_IF_DDR),
 #endif
-	SET_LAW(CFG_PCI_MEM_PHYS, LAW_SIZE_256M, LAW_TRGT_IF_PCI),
-	SET_LAW(CFG_LBC_SDRAM_BASE, LAW_SIZE_512M, LAW_TRGT_IF_LBC),
+	SET_LAW(CONFIG_SYS_PCI_MEM_PHYS, LAW_SIZE_256M, LAW_TRGT_IF_PCI),
+	SET_LAW(CONFIG_SYS_LBC_SDRAM_BASE, LAW_SIZE_512M, LAW_TRGT_IF_LBC),
 };
 
 int num_law_entries = ARRAY_SIZE(law_table);
diff --git a/board/sbc8560/sbc8560.c b/board/sbc8560/sbc8560.c
index dc661702c..3d4008b00 100644
--- a/board/sbc8560/sbc8560.c
+++ b/board/sbc8560/sbc8560.c
@@ -197,7 +197,7 @@ const iop_conf_t iop_conf_tab[4][32] = {
 int board_early_init_f (void)
 {
 #if defined(CONFIG_PCI)
-    volatile ccsr_pcix_t *pci = (void *)(CFG_MPC85xx_PCIX_ADDR);
+    volatile ccsr_pcix_t *pci = (void *)(CONFIG_SYS_MPC85xx_PCIX_ADDR);
 
     pci->peer &= 0xfffffffdf; /* disable master abort */
 #endif
@@ -207,7 +207,7 @@ int board_early_init_f (void)
 void reset_phy (void)
 {
 #if defined(CONFIG_ETHER_ON_FCC) /* avoid compile warnings for now */
-	volatile unsigned char *bcsr = (unsigned char *) CFG_BCSR;
+	volatile unsigned char *bcsr = (unsigned char *) CONFIG_SYS_BCSR;
 #endif
 	/* reset Giga bit Ethernet port if needed here */
 
@@ -238,6 +238,7 @@ void reset_phy (void)
 int checkboard (void)
 {
 	sys_info_t sysinfo;
+	char buf[32];
 
 	get_sys_info (&sysinfo);
 
@@ -246,16 +247,17 @@ int checkboard (void)
 #else
 	printf ("Board: Wind River SBC8540 Board\n");
 #endif
-	printf ("\tCPU: %lu MHz\n", sysinfo.freqProcessor / 1000000);
-	printf ("\tCCB: %lu MHz\n", sysinfo.freqSystemBus / 1000000);
-	printf ("\tDDR: %lu MHz\n", sysinfo.freqSystemBus / 2000000);
-	if((CFG_LBC_LCRR & 0x0f) == 2 || (CFG_LBC_LCRR & 0x0f) == 4 \
-		|| (CFG_LBC_LCRR & 0x0f) == 8) {
-		printf ("\tLBC: %lu MHz\n", sysinfo.freqSystemBus / 1000000 /(CFG_LBC_LCRR & 0x0f));
+	printf ("\tCPU: %s MHz\n", strmhz(buf, sysinfo.freqProcessor));
+	printf ("\tCCB: %s MHz\n", strmhz(buf, sysinfo.freqSystemBus));
+	printf ("\tDDR: %s MHz\n", strmhz(buf, sysinfo.freqSystemBus/2));
+	if((CONFIG_SYS_LBC_LCRR & 0x0f) == 2 || (CONFIG_SYS_LBC_LCRR & 0x0f) == 4 \
+		|| (CONFIG_SYS_LBC_LCRR & 0x0f) == 8) {
+		printf ("\tLBC: %s MHz\n",
+			strmhz(buf, sysinfo.freqSystemBus/(CONFIG_SYS_LBC_LCRR & 0x0f)));
 	} else {
 		printf("\tLBC: unknown\n");
 	}
-	printf("\tCPM: %lu Mhz\n", sysinfo.freqSystemBus / 1000000);
+	printf("\tCPM: %s MHz\n", strmhz(buf, sysinfo.freqSystemBus));
 	printf("L1 D-cache 32KB, L1 I-cache 32KB enabled.\n");
 	return (0);
 }
@@ -267,13 +269,13 @@ phys_size_t initdram (int board_type)
 
 #if 0
 #if !defined(CONFIG_RAM_AS_FLASH)
-	volatile ccsr_lbc_t *lbc = (void *)(CFG_MPC85xx_LBC_ADDR);
+	volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR);
 	sys_info_t sysinfo;
 	uint temp_lbcdll = 0;
 #endif
 #endif /* 0 */
 #if !defined(CONFIG_RAM_AS_FLASH) || defined(CONFIG_DDR_DLL)
-	volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR);
+	volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
 #endif
 #if defined(CONFIG_DDR_DLL)
 	uint temp_ddrdll = 0;
@@ -295,39 +297,39 @@ phys_size_t initdram (int board_type)
 #if 0
 #if !defined(CONFIG_RAM_AS_FLASH) /* LocalBus SDRAM is not emulating flash */
 	get_sys_info(&sysinfo);
-	/* if localbus freq is less than 66Mhz,we use bypass mode,otherwise use DLL */
-	if(sysinfo.freqSystemBus/(CFG_LBC_LCRR & 0x0f) < 66000000) {
-		lbc->lcrr = (CFG_LBC_LCRR & 0x0fffffff)| 0x80000000;
+	/* if localbus freq is less than 66MHz,we use bypass mode,otherwise use DLL */
+	if(sysinfo.freqSystemBus/(CONFIG_SYS_LBC_LCRR & 0x0f) < 66000000) {
+		lbc->lcrr = (CONFIG_SYS_LBC_LCRR & 0x0fffffff)| 0x80000000;
 	} else {
 #if defined(CONFIG_MPC85xx_REV1) /* need change CLKDIV before enable DLL */
 		lbc->lcrr = 0x10000004; /* default CLKDIV is 8, change it to 4 temporarily */
 #endif
-		lbc->lcrr = CFG_LBC_LCRR & 0x7fffffff;
+		lbc->lcrr = CONFIG_SYS_LBC_LCRR & 0x7fffffff;
 		udelay(200);
 		temp_lbcdll = gur->lbcdllcr;
 		gur->lbcdllcr = ((temp_lbcdll & 0xff) << 16 ) | 0x80000000;
 		asm("sync;isync;msync");
 	}
-	lbc->or2 = CFG_OR2_PRELIM; /* 64MB SDRAM */
-	lbc->br2 = CFG_BR2_PRELIM;
-	lbc->lbcr = CFG_LBC_LBCR;
-	lbc->lsdmr = CFG_LBC_LSDMR_1;
+	lbc->or2 = CONFIG_SYS_OR2_PRELIM; /* 64MB SDRAM */
+	lbc->br2 = CONFIG_SYS_BR2_PRELIM;
+	lbc->lbcr = CONFIG_SYS_LBC_LBCR;
+	lbc->lsdmr = CONFIG_SYS_LBC_LSDMR_1;
 	asm("sync");
 	(unsigned int) * (ulong *)0 = 0x000000ff;
-	lbc->lsdmr = CFG_LBC_LSDMR_2;
+	lbc->lsdmr = CONFIG_SYS_LBC_LSDMR_2;
 	asm("sync");
 	(unsigned int) * (ulong *)0 = 0x000000ff;
-	lbc->lsdmr = CFG_LBC_LSDMR_3;
+	lbc->lsdmr = CONFIG_SYS_LBC_LSDMR_3;
 	asm("sync");
 	(unsigned int) * (ulong *)0 = 0x000000ff;
-	lbc->lsdmr = CFG_LBC_LSDMR_4;
+	lbc->lsdmr = CONFIG_SYS_LBC_LSDMR_4;
 	asm("sync");
 	(unsigned int) * (ulong *)0 = 0x000000ff;
-	lbc->lsdmr = CFG_LBC_LSDMR_5;
+	lbc->lsdmr = CONFIG_SYS_LBC_LSDMR_5;
 	asm("sync");
-	lbc->lsrt = CFG_LBC_LSRT;
+	lbc->lsrt = CONFIG_SYS_LBC_LSRT;
 	asm("sync");
-	lbc->mrtpr = CFG_LBC_MRTPR;
+	lbc->mrtpr = CONFIG_SYS_LBC_MRTPR;
 	asm("sync");
 #endif
 #endif
@@ -338,7 +340,7 @@ phys_size_t initdram (int board_type)
 		 * enable errors */
 		uint *p = 0;
 		uint i = 0;
-		volatile ccsr_ddr_t *ddr= (void *)(CFG_MPC85xx_DDR_ADDR);
+		volatile ccsr_ddr_t *ddr= (void *)(CONFIG_SYS_MPC85xx_DDR_ADDR);
 		dma_init();
 		for (*p = 0; p < (uint *)(8 * 1024); p++) {
 			if (((unsigned int)p & 0x1f) == 0) { dcbz(p); }
@@ -381,11 +383,11 @@ phys_size_t initdram (int board_type)
 }
 
 
-#if defined(CFG_DRAM_TEST)
+#if defined(CONFIG_SYS_DRAM_TEST)
 int testdram (void)
 {
-	uint *pstart = (uint *) CFG_MEMTEST_START;
-	uint *pend = (uint *) CFG_MEMTEST_END;
+	uint *pstart = (uint *) CONFIG_SYS_MEMTEST_START;
+	uint *pend = (uint *) CONFIG_SYS_MEMTEST_END;
 	uint *p;
 
 	printf("SDRAM test phase 1:\n");
@@ -422,12 +424,12 @@ int testdram (void)
 long int fixed_sdram (void)
 {
 
-#define CFG_DDR_CONTROL 0xc2000000
+#define CONFIG_SYS_DDR_CONTROL 0xc2000000
 
-  #ifndef CFG_RAMBOOT
-	volatile ccsr_ddr_t *ddr= (void *)(CFG_MPC85xx_DDR_ADDR);
+  #ifndef CONFIG_SYS_RAMBOOT
+	volatile ccsr_ddr_t *ddr= (void *)(CONFIG_SYS_MPC85xx_DDR_ADDR);
 
-#if (CFG_SDRAM_SIZE == 512)
+#if (CONFIG_SYS_SDRAM_SIZE == 512)
 	ddr->cs0_bnds		= 0x0000000f;
 #else
 	ddr->cs0_bnds		= 0x00000007;
@@ -452,14 +454,14 @@ long int fixed_sdram (void)
 	udelay(500);
     #if defined (CONFIG_DDR_ECC)
 	/* Enable ECC checking */
-	ddr->sdram_cfg = (CFG_DDR_CONTROL | 0x20000000);
+	ddr->sdram_cfg = (CONFIG_SYS_DDR_CONTROL | 0x20000000);
     #else
-	ddr->sdram_cfg = CFG_DDR_CONTROL;
+	ddr->sdram_cfg = CONFIG_SYS_DDR_CONTROL;
     #endif
 	asm("sync; isync; msync");
 	udelay(500);
   #endif
-	return CFG_SDRAM_SIZE * 1024 * 1024;
+	return CONFIG_SYS_SDRAM_SIZE * 1024 * 1024;
 }
 #endif	/* !defined(CONFIG_SPD_EEPROM) */
 
diff --git a/board/sbc8560/tlb.c b/board/sbc8560/tlb.c
index d07339960..fe0ac763a 100644
--- a/board/sbc8560/tlb.c
+++ b/board/sbc8560/tlb.c
@@ -28,7 +28,7 @@
 
 struct fsl_e_tlb_entry tlb_table[] = {
 /* TLB for CCSRBAR (IMMR) */
-	SET_TLB_ENTRY(1, CFG_CCSRBAR, CFG_CCSRBAR_PHYS,
+	SET_TLB_ENTRY(1, CONFIG_SYS_CCSRBAR, CONFIG_SYS_CCSRBAR_PHYS,
 		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 		      0, 1, BOOKE_PAGESZ_1M, 1),
 
@@ -44,20 +44,20 @@ struct fsl_e_tlb_entry tlb_table[] = {
 		      0, 3, BOOKE_PAGESZ_256M, 1),
 
 #if !defined(CONFIG_SPD_EEPROM)
-	SET_TLB_ENTRY(1, CFG_DDR_SDRAM_BASE, CFG_DDR_SDRAM_BASE,
+	SET_TLB_ENTRY(1, CONFIG_SYS_DDR_SDRAM_BASE, CONFIG_SYS_DDR_SDRAM_BASE,
 		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
 		      0, 4, BOOKE_PAGESZ_256M, 1),
 
-	SET_TLB_ENTRY(1, CFG_DDR_SDRAM_BASE + 0x10000000, CFG_DDR_SDRAM_BASE + 0x10000000,
+	SET_TLB_ENTRY(1, CONFIG_SYS_DDR_SDRAM_BASE + 0x10000000, CONFIG_SYS_DDR_SDRAM_BASE + 0x10000000,
 		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
 		      0, 5, BOOKE_PAGESZ_256M, 1),
 #endif
 
-	SET_TLB_ENTRY(1, CFG_INIT_RAM_ADDR, CFG_INIT_RAM_ADDR,
+	SET_TLB_ENTRY(1, CONFIG_SYS_INIT_RAM_ADDR, CONFIG_SYS_INIT_RAM_ADDR,
 		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
 		      0, 6, BOOKE_PAGESZ_16K, 1),
 
-	SET_TLB_ENTRY(1, CFG_PCI_MEM_PHYS, CFG_PCI_MEM_PHYS,
+	SET_TLB_ENTRY(1, CONFIG_SYS_PCI_MEM_PHYS, CONFIG_SYS_PCI_MEM_PHYS,
 		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 		      0, 7, BOOKE_PAGESZ_256M, 1),
 };
diff --git a/board/sbc8560/u-boot.lds b/board/sbc8560/u-boot.lds
index 237a3b60b..759ee82c9 100644
--- a/board/sbc8560/u-boot.lds
+++ b/board/sbc8560/u-boot.lds
@@ -146,6 +146,7 @@ SECTIONS
    *(.dynbss)
    *(.bss)
    *(COMMON)
+   . = ALIGN(4);
   }
   _end = . ;
   PROVIDE (end = .);
diff --git a/board/sbc8641d/ddr.c b/board/sbc8641d/ddr.c
index 5163abf05..23497f982 100644
--- a/board/sbc8641d/ddr.c
+++ b/board/sbc8641d/ddr.c
@@ -10,6 +10,7 @@
 #include <i2c.h>
 
 #include <asm/fsl_ddr_sdram.h>
+#include <asm/fsl_ddr_dimm_params.h>
 
 static void
 get_spd(ddr2_spd_eeprom_t *spd, unsigned char i2c_address)
@@ -45,7 +46,9 @@ void fsl_ddr_get_spd(ddr2_spd_eeprom_t *ctrl_dimms_spd,
 	}
 }
 
-void fsl_ddr_board_options(memctl_options_t *popts, unsigned int ctrl_num)
+void fsl_ddr_board_options(memctl_options_t *popts,
+				dimm_params_t *pdimm,
+				unsigned int ctrl_num)
 {
 	/*
 	 * Factors to consider for clock adjust:
diff --git a/board/sbc8641d/law.c b/board/sbc8641d/law.c
index 801c5b75f..de47fcd63 100644
--- a/board/sbc8641d/law.c
+++ b/board/sbc8641d/law.c
@@ -44,15 +44,15 @@
 
 
 struct law_entry law_table[] = {
-	SET_LAW(CFG_DDR_SDRAM_BASE, LAW_SIZE_256M, LAW_TRGT_IF_DDR_1),
-	SET_LAW(CFG_PCI1_MEM_BASE, LAW_SIZE_512M, LAW_TRGT_IF_PCI_1),
-	SET_LAW(CFG_PCI2_MEM_BASE, LAW_SIZE_512M, LAW_TRGT_IF_PCI_2),
+	SET_LAW(CONFIG_SYS_DDR_SDRAM_BASE, LAW_SIZE_256M, LAW_TRGT_IF_DDR_1),
+	SET_LAW(CONFIG_SYS_PCI1_MEM_BASE, LAW_SIZE_512M, LAW_TRGT_IF_PCI_1),
+	SET_LAW(CONFIG_SYS_PCI2_MEM_BASE, LAW_SIZE_512M, LAW_TRGT_IF_PCI_2),
 	SET_LAW(0xf8000000, LAW_SIZE_2M, LAW_TRGT_IF_LBC),
-	SET_LAW(CFG_PCI1_IO_BASE, LAW_SIZE_16M, LAW_TRGT_IF_PCI_1),
-	SET_LAW(CFG_PCI2_IO_BASE, LAW_SIZE_16M, LAW_TRGT_IF_PCI_2),
+	SET_LAW(CONFIG_SYS_PCI1_IO_BASE, LAW_SIZE_16M, LAW_TRGT_IF_PCI_1),
+	SET_LAW(CONFIG_SYS_PCI2_IO_BASE, LAW_SIZE_16M, LAW_TRGT_IF_PCI_2),
 	SET_LAW(0xfe000000, LAW_SIZE_32M, LAW_TRGT_IF_LBC),
-	SET_LAW(CFG_DDR_SDRAM_BASE, LAW_SIZE_256M, LAW_TRGT_IF_DDR_2),
-	SET_LAW(CFG_RIO_MEM_BASE, LAW_SIZE_512M, LAW_TRGT_IF_RIO)
+	SET_LAW(CONFIG_SYS_DDR_SDRAM_BASE, LAW_SIZE_256M, LAW_TRGT_IF_DDR_2),
+	SET_LAW(CONFIG_SYS_RIO_MEM_BASE, LAW_SIZE_512M, LAW_TRGT_IF_RIO)
 };
 
 int num_law_entries = ARRAY_SIZE(law_table);
diff --git a/board/sbc8641d/sbc8641d.c b/board/sbc8641d/sbc8641d.c
index 62b48c836..1471e581e 100644
--- a/board/sbc8641d/sbc8641d.c
+++ b/board/sbc8641d/sbc8641d.c
@@ -38,10 +38,6 @@
 #include <libfdt.h>
 #include <fdt_support.h>
 
-#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
-extern void ddr_enable_ecc (unsigned int dram_size);
-#endif
-
 long int fixed_sdram (void);
 
 int board_early_init_f (void)
@@ -66,27 +62,20 @@ phys_size_t initdram (int board_type)
 	dram_size = fixed_sdram ();
 #endif
 
-#if defined(CFG_RAMBOOT)
+#if defined(CONFIG_SYS_RAMBOOT)
 	puts ("    DDR: ");
 	return dram_size;
 #endif
 
-#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
-	/*
-	 * Initialize and enable DDR ECC.
-	 */
-	ddr_enable_ecc (dram_size);
-#endif
-
 	puts ("    DDR: ");
 	return dram_size;
 }
 
-#if defined(CFG_DRAM_TEST)
+#if defined(CONFIG_SYS_DRAM_TEST)
 int testdram (void)
 {
-	uint *pstart = (uint *) CFG_MEMTEST_START;
-	uint *pend = (uint *) CFG_MEMTEST_END;
+	uint *pstart = (uint *) CONFIG_SYS_MEMTEST_START;
+	uint *pend = (uint *) CONFIG_SYS_MEMTEST_END;
 	uint *p;
 
 	puts ("SDRAM test phase 1:\n");
@@ -122,72 +111,72 @@ int testdram (void)
  */
 long int fixed_sdram (void)
 {
-#if !defined(CFG_RAMBOOT)
-	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+#if !defined(CONFIG_SYS_RAMBOOT)
+	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
 	volatile ccsr_ddr_t *ddr = &immap->im_ddr1;
 
-	ddr->cs0_bnds = CFG_DDR_CS0_BNDS;
-	ddr->cs1_bnds = CFG_DDR_CS1_BNDS;
-	ddr->cs2_bnds = CFG_DDR_CS2_BNDS;
-	ddr->cs3_bnds = CFG_DDR_CS3_BNDS;
-	ddr->cs0_config = CFG_DDR_CS0_CONFIG;
-	ddr->cs1_config = CFG_DDR_CS1_CONFIG;
-	ddr->cs2_config = CFG_DDR_CS2_CONFIG;
-	ddr->cs3_config = CFG_DDR_CS3_CONFIG;
-	ddr->timing_cfg_3 = CFG_DDR_TIMING_3;
-	ddr->timing_cfg_0 = CFG_DDR_TIMING_0;
-	ddr->timing_cfg_1 = CFG_DDR_TIMING_1;
-	ddr->timing_cfg_2 = CFG_DDR_TIMING_2;
-	ddr->sdram_cfg_1 = CFG_DDR_CFG_1A;
-	ddr->sdram_cfg_2 = CFG_DDR_CFG_2;
-	ddr->sdram_mode_1 = CFG_DDR_MODE_1;
-	ddr->sdram_mode_2 = CFG_DDR_MODE_2;
-	ddr->sdram_mode_cntl = CFG_DDR_MODE_CTL;
-	ddr->sdram_interval = CFG_DDR_INTERVAL;
-	ddr->sdram_data_init = CFG_DDR_DATA_INIT;
-	ddr->sdram_clk_cntl = CFG_DDR_CLK_CTRL;
+	ddr->cs0_bnds = CONFIG_SYS_DDR_CS0_BNDS;
+	ddr->cs1_bnds = CONFIG_SYS_DDR_CS1_BNDS;
+	ddr->cs2_bnds = CONFIG_SYS_DDR_CS2_BNDS;
+	ddr->cs3_bnds = CONFIG_SYS_DDR_CS3_BNDS;
+	ddr->cs0_config = CONFIG_SYS_DDR_CS0_CONFIG;
+	ddr->cs1_config = CONFIG_SYS_DDR_CS1_CONFIG;
+	ddr->cs2_config = CONFIG_SYS_DDR_CS2_CONFIG;
+	ddr->cs3_config = CONFIG_SYS_DDR_CS3_CONFIG;
+	ddr->timing_cfg_3 = CONFIG_SYS_DDR_TIMING_3;
+	ddr->timing_cfg_0 = CONFIG_SYS_DDR_TIMING_0;
+	ddr->timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1;
+	ddr->timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2;
+	ddr->sdram_cfg_1 = CONFIG_SYS_DDR_CFG_1A;
+	ddr->sdram_cfg_2 = CONFIG_SYS_DDR_CFG_2;
+	ddr->sdram_mode_1 = CONFIG_SYS_DDR_MODE_1;
+	ddr->sdram_mode_2 = CONFIG_SYS_DDR_MODE_2;
+	ddr->sdram_mode_cntl = CONFIG_SYS_DDR_MODE_CTL;
+	ddr->sdram_interval = CONFIG_SYS_DDR_INTERVAL;
+	ddr->sdram_data_init = CONFIG_SYS_DDR_DATA_INIT;
+	ddr->sdram_clk_cntl = CONFIG_SYS_DDR_CLK_CTRL;
 
 	asm ("sync;isync");
 
 	udelay (500);
 
-	ddr->sdram_cfg_1 = CFG_DDR_CFG_1B;
+	ddr->sdram_cfg_1 = CONFIG_SYS_DDR_CFG_1B;
 	asm ("sync; isync");
 
 	udelay (500);
 	ddr = &immap->im_ddr2;
 
-	ddr->cs0_bnds = CFG_DDR2_CS0_BNDS;
-	ddr->cs1_bnds = CFG_DDR2_CS1_BNDS;
-	ddr->cs2_bnds = CFG_DDR2_CS2_BNDS;
-	ddr->cs3_bnds = CFG_DDR2_CS3_BNDS;
-	ddr->cs0_config = CFG_DDR2_CS0_CONFIG;
-	ddr->cs1_config = CFG_DDR2_CS1_CONFIG;
-	ddr->cs2_config = CFG_DDR2_CS2_CONFIG;
-	ddr->cs3_config = CFG_DDR2_CS3_CONFIG;
-	ddr->timing_cfg_3 = CFG_DDR2_EXT_REFRESH;
-	ddr->timing_cfg_0 = CFG_DDR2_TIMING_0;
-	ddr->timing_cfg_1 = CFG_DDR2_TIMING_1;
-	ddr->timing_cfg_2 = CFG_DDR2_TIMING_2;
-	ddr->sdram_cfg_1 = CFG_DDR2_CFG_1A;
-	ddr->sdram_cfg_2 = CFG_DDR2_CFG_2;
-	ddr->sdram_mode_1 = CFG_DDR2_MODE_1;
-	ddr->sdram_mode_2 = CFG_DDR2_MODE_2;
-	ddr->sdram_mode_cntl = CFG_DDR2_MODE_CTL;
-	ddr->sdram_interval = CFG_DDR2_INTERVAL;
-	ddr->sdram_data_init = CFG_DDR2_DATA_INIT;
-	ddr->sdram_clk_cntl = CFG_DDR2_CLK_CTRL;
+	ddr->cs0_bnds = CONFIG_SYS_DDR2_CS0_BNDS;
+	ddr->cs1_bnds = CONFIG_SYS_DDR2_CS1_BNDS;
+	ddr->cs2_bnds = CONFIG_SYS_DDR2_CS2_BNDS;
+	ddr->cs3_bnds = CONFIG_SYS_DDR2_CS3_BNDS;
+	ddr->cs0_config = CONFIG_SYS_DDR2_CS0_CONFIG;
+	ddr->cs1_config = CONFIG_SYS_DDR2_CS1_CONFIG;
+	ddr->cs2_config = CONFIG_SYS_DDR2_CS2_CONFIG;
+	ddr->cs3_config = CONFIG_SYS_DDR2_CS3_CONFIG;
+	ddr->timing_cfg_3 = CONFIG_SYS_DDR2_EXT_REFRESH;
+	ddr->timing_cfg_0 = CONFIG_SYS_DDR2_TIMING_0;
+	ddr->timing_cfg_1 = CONFIG_SYS_DDR2_TIMING_1;
+	ddr->timing_cfg_2 = CONFIG_SYS_DDR2_TIMING_2;
+	ddr->sdram_cfg_1 = CONFIG_SYS_DDR2_CFG_1A;
+	ddr->sdram_cfg_2 = CONFIG_SYS_DDR2_CFG_2;
+	ddr->sdram_mode_1 = CONFIG_SYS_DDR2_MODE_1;
+	ddr->sdram_mode_2 = CONFIG_SYS_DDR2_MODE_2;
+	ddr->sdram_mode_cntl = CONFIG_SYS_DDR2_MODE_CTL;
+	ddr->sdram_interval = CONFIG_SYS_DDR2_INTERVAL;
+	ddr->sdram_data_init = CONFIG_SYS_DDR2_DATA_INIT;
+	ddr->sdram_clk_cntl = CONFIG_SYS_DDR2_CLK_CTRL;
 
 	asm ("sync;isync");
 
 	udelay (500);
 
-	ddr->sdram_cfg_1 = CFG_DDR2_CFG_1B;
+	ddr->sdram_cfg_1 = CONFIG_SYS_DDR2_CFG_1B;
 	asm ("sync; isync");
 
 	udelay (500);
 #endif
-	return CFG_SDRAM_SIZE * 1024 * 1024;
+	return CONFIG_SYS_SDRAM_SIZE * 1024 * 1024;
 }
 #endif				/* !defined(CONFIG_SPD_EEPROM) */
 
@@ -220,9 +209,12 @@ static struct pci_controller pci2_hose;
 
 int first_free_busno = 0;
 
+extern int fsl_pci_setup_inbound_windows(struct pci_region *r);
+extern void fsl_pci_init(struct pci_controller *hose);
+
 void pci_init_board(void)
 {
-	volatile immap_t *immap = (immap_t *) CFG_CCSRBAR;
+	volatile immap_t *immap = (immap_t *) CONFIG_SYS_CCSRBAR;
 	volatile ccsr_gur_t *gur = &immap->im_gur;
 	uint devdisr = gur->devdisr;
 	uint io_sel = (gur->pordevsr & MPC8641_PORDEVSR_IO_SEL)
@@ -230,9 +222,9 @@ void pci_init_board(void)
 
 #ifdef CONFIG_PCI1
 {
-	volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CFG_PCI1_ADDR;
-	extern void fsl_pci_init(struct pci_controller *hose);
+	volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCI1_ADDR;
 	struct pci_controller *hose = &pci1_hose;
+	struct pci_region *r = hose->regions;
 #ifdef DEBUG
 	uint host1_agent = (gur->porbmsr & MPC8641_PORBMSR_HA)
 		>> MPC8641_PORBMSR_HA_SHIFT;
@@ -251,27 +243,23 @@ void pci_init_board(void)
 		debug("\n");
 
 		/* inbound */
-		pci_set_region(hose->regions + 0,
-			       CFG_PCI_MEMORY_BUS,
-			       CFG_PCI_MEMORY_PHYS,
-			       CFG_PCI_MEMORY_SIZE,
-			       PCI_REGION_MEM | PCI_REGION_MEMORY);
+		r += fsl_pci_setup_inbound_windows(r);
 
 		/* outbound memory */
-		pci_set_region(hose->regions + 1,
-			       CFG_PCI1_MEM_BASE,
-			       CFG_PCI1_MEM_PHYS,
-			       CFG_PCI1_MEM_SIZE,
+		pci_set_region(r++,
+			       CONFIG_SYS_PCI1_MEM_BASE,
+			       CONFIG_SYS_PCI1_MEM_PHYS,
+			       CONFIG_SYS_PCI1_MEM_SIZE,
 			       PCI_REGION_MEM);
 
 		/* outbound io */
-		pci_set_region(hose->regions + 2,
-			       CFG_PCI1_IO_BASE,
-			       CFG_PCI1_IO_PHYS,
-			       CFG_PCI1_IO_SIZE,
+		pci_set_region(r++,
+			       CONFIG_SYS_PCI1_IO_BASE,
+			       CONFIG_SYS_PCI1_IO_PHYS,
+			       CONFIG_SYS_PCI1_IO_SIZE,
 			       PCI_REGION_IO);
 
-		hose->region_count = 3;
+		hose->region_count = r - hose->regions;
 
 		hose->first_busno=first_free_busno;
 		pci_setup_indirect(hose, (int) &pci->cfg_addr, (int) &pci->cfg_data);
@@ -292,33 +280,29 @@ void pci_init_board(void)
 
 #ifdef CONFIG_PCI2
 {
-	volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CFG_PCI2_ADDR;
-	extern void fsl_pci_init(struct pci_controller *hose);
+	volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCI2_ADDR;
 	struct pci_controller *hose = &pci2_hose;
+	struct pci_region *r = hose->regions;
 
 
 	/* inbound */
-	pci_set_region(hose->regions + 0,
-		       CFG_PCI_MEMORY_BUS,
-		       CFG_PCI_MEMORY_PHYS,
-		       CFG_PCI_MEMORY_SIZE,
-		       PCI_REGION_MEM | PCI_REGION_MEMORY);
+	r += fsl_pci_setup_inbound_windows(r);
 
 	/* outbound memory */
-	pci_set_region(hose->regions + 1,
-		       CFG_PCI2_MEM_BASE,
-		       CFG_PCI2_MEM_PHYS,
-		       CFG_PCI2_MEM_SIZE,
+	pci_set_region(r++,
+		       CONFIG_SYS_PCI2_MEM_BASE,
+		       CONFIG_SYS_PCI2_MEM_PHYS,
+		       CONFIG_SYS_PCI2_MEM_SIZE,
 		       PCI_REGION_MEM);
 
 	/* outbound io */
-	pci_set_region(hose->regions + 2,
-		       CFG_PCI2_IO_BASE,
-		       CFG_PCI2_IO_PHYS,
-		       CFG_PCI2_IO_SIZE,
+	pci_set_region(r++,
+		       CONFIG_SYS_PCI2_IO_BASE,
+		       CONFIG_SYS_PCI2_IO_PHYS,
+		       CONFIG_SYS_PCI2_IO_SIZE,
 		       PCI_REGION_IO);
 
-	hose->region_count = 3;
+	hose->region_count = r - hose->regions;
 
 	hose->first_busno=first_free_busno;
 	pci_setup_indirect(hose, (int) &pci->cfg_addr, (int) &pci->cfg_data);
@@ -337,33 +321,19 @@ void pci_init_board(void)
 
 
 #if defined(CONFIG_OF_BOARD_SETUP)
+extern void ft_fsl_pci_setup(void *blob, const char *pci_alias,
+			struct pci_controller *hose);
 
-void
-ft_board_setup (void *blob, bd_t *bd)
+void ft_board_setup (void *blob, bd_t *bd)
 {
-	int node, tmp[2];
-	const char *path;
-
 	ft_cpu_setup(blob, bd);
 
-	node = fdt_path_offset(blob, "/aliases");
-	tmp[0] = 0;
-	if (node >= 0) {
 #ifdef CONFIG_PCI1
-		path = fdt_getprop(blob, node, "pci0", NULL);
-		if (path) {
-			tmp[1] = pci1_hose.last_busno - pci1_hose.first_busno;
-			do_fixup_by_path(blob, path, "bus-range", &tmp, 8, 1);
-		}
+	ft_fsl_pci_setup(blob, "pci0", &pci1_hose);
 #endif
 #ifdef CONFIG_PCI2
-		path = fdt_getprop(blob, node, "pci1", NULL);
-		if (path) {
-			tmp[1] = pci2_hose.last_busno - pci2_hose.first_busno;
-			do_fixup_by_path(blob, path, "bus-range", &tmp, 8, 1);
-		}
+	ft_fsl_pci_setup(blob, "pci1", &pci2_hose);
 #endif
-	}
 }
 #endif
 
diff --git a/board/sbc8641d/u-boot.lds b/board/sbc8641d/u-boot.lds
index a9e9d80a1..adfa816b4 100644
--- a/board/sbc8641d/u-boot.lds
+++ b/board/sbc8641d/u-boot.lds
@@ -128,6 +128,7 @@ SECTIONS
    *(.dynbss)
    *(.bss)
    *(COMMON)
+   . = ALIGN(4);
   }
   _end = . ;
   PROVIDE (end = .);
diff --git a/board/sc3/sc3.c b/board/sc3/sc3.c
index 3d1a6542d..6c82fe7e9 100644
--- a/board/sc3/sc3.c
+++ b/board/sc3/sc3.c
@@ -37,6 +37,7 @@
 #include <pci.h>
 #include <i2c.h>
 #include <malloc.h>
+#include <netdev.h>
 
 #undef writel
 #undef writeb
@@ -779,3 +780,8 @@ void pci_init_board(void)
 	hose.config_table = pci_solidcard3_config_table;
 	pci_405gp_init(&hose);
 }
+
+int board_eth_init(bd_t *bis)
+{
+	return pci_eth_init(bis);
+}
diff --git a/board/sc3/sc3nand.c b/board/sc3/sc3nand.c
index 45eff28c0..62b40f167 100644
--- a/board/sc3/sc3nand.c
+++ b/board/sc3/sc3nand.c
@@ -77,7 +77,7 @@ int board_nand_init(struct nand_chip *nand)
 {
 	nand->ecc.mode = NAND_ECC_SOFT;
 
-	sc3_io_base = (void *) CFG_NAND_BASE;
+	sc3_io_base = (void *) CONFIG_SYS_NAND_BASE;
 	/* Set address of NAND IO lines (Using Linear Data Access Region) */
 	nand->IO_ADDR_R = (void __iomem *) sc3_io_base;
 	nand->IO_ADDR_W = (void __iomem *) sc3_io_base;
diff --git a/board/sc3/u-boot.lds b/board/sc3/u-boot.lds
index 27cc0b928..d729f2e0e 100644
--- a/board/sc3/u-boot.lds
+++ b/board/sc3/u-boot.lds
@@ -74,7 +74,7 @@ SECTIONS
     lib_generic/zlib.o		(.text)
 
 /*    . = env_offset;*/
-/*    common/environment.o(.text)*/
+/*    common/env_embedded.o(.text)*/
 
     *(.text)
     *(.fixup)
@@ -143,6 +143,7 @@ SECTIONS
    *(.dynbss)
    *(.bss)
    *(COMMON)
+   . = ALIGN(4);
   }
   _end = . ;
   PROVIDE (end = .);
diff --git a/board/sc520_cdp/flash.c b/board/sc520_cdp/flash.c
index d52a847c7..dcb8c57e8 100644
--- a/board/sc520_cdp/flash.c
+++ b/board/sc520_cdp/flash.c
@@ -222,7 +222,7 @@ ulong flash_init(void)
 		ulong flashbase = 0;
 		int sectsize = 0;
 
-		memset(flash_info[i].protect, 0, CFG_MAX_FLASH_SECT);
+		memset(flash_info[i].protect, 0, CONFIG_SYS_MAX_FLASH_SECT);
 		switch (i) {
 		case 0:
 			flashbase = SC520_FLASH_BANK0_BASE;
@@ -276,10 +276,10 @@ ulong flash_init(void)
 		      i386boot_start,
 		      i386boot_end,
 		      &flash_info[0]);
-#ifdef CFG_ENV_ADDR
+#ifdef CONFIG_ENV_ADDR
 	flash_protect(FLAG_PROTECT_SET,
-		      CFG_ENV_ADDR,
-		      CFG_ENV_ADDR + CFG_ENV_SIZE - 1,
+		      CONFIG_ENV_ADDR,
+		      CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1,
 		      &flash_info[0]);
 #endif
 	return size;
@@ -370,7 +370,7 @@ static u32 _amd_erase_flash(u32 addr, u32 sector)
 	while (((*(volatile u32*)(addr + sector)) & 0x80808080) != 0x80808080) {
 
 		elapsed += *(volatile u16*)(0xfffef000+SC520_SWTMRMILLI);
-		if (elapsed > ((CFG_FLASH_ERASE_TOUT/CFG_HZ) * 1000)) {
+		if (elapsed > ((CONFIG_SYS_FLASH_ERASE_TOUT/CONFIG_SYS_HZ) * 1000)) {
 			*(volatile u32*)(addr) = 0xf0f0f0f0;
 			return 1;
 		}
@@ -493,7 +493,7 @@ static int _amd_write_word(unsigned start, unsigned dest, unsigned data)
 	/* data polling for D7 */
 	while ((dest2[0] & 0x80808080) != (data2[0] & 0x80808080)) {
 		elapsed += *(volatile u16*)(0xfffef000+SC520_SWTMRMILLI);
-		if (elapsed > ((CFG_FLASH_WRITE_TOUT/CFG_HZ) * 1000)) {
+		if (elapsed > ((CONFIG_SYS_FLASH_WRITE_TOUT/CONFIG_SYS_HZ) * 1000)) {
 			addr2[0] = 0xf0f0f0f0;
 			return 1;
 		}
diff --git a/board/sc520_cdp/flash_old.c b/board/sc520_cdp/flash_old.c
index 3c0f6d6a6..9491ca296 100644
--- a/board/sc520_cdp/flash_old.c
+++ b/board/sc520_cdp/flash_old.c
@@ -89,7 +89,7 @@ ulong flash_init(void)
 			flash_info[i].sector_count = 0;
 			sectsize=0;
 		}
-		memset(flash_info[i].protect, 0, CFG_MAX_FLASH_SECT);
+		memset(flash_info[i].protect, 0, CONFIG_SYS_MAX_FLASH_SECT);
 		switch (i) {
 		case 0:
 			flashbase = SC520_FLASH_BANK0_BASE;
@@ -119,10 +119,10 @@ ulong flash_init(void)
 		      i386boot_end-SC520_FLASH_BANK0_BASE,
 		      &flash_info[0]);
 
-#ifdef CFG_ENV_ADDR
+#ifdef CONFIG_ENV_ADDR
 	flash_protect(FLAG_PROTECT_SET,
-		      CFG_ENV_ADDR,
-		      CFG_ENV_ADDR + CFG_ENV_SIZE - 1,
+		      CONFIG_ENV_ADDR,
+		      CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1,
 		      &flash_info[0]);
 #endif
 	return size;
@@ -240,7 +240,7 @@ int flash_erase(flash_info_t *info, int s_first, int s_last)
 				result = readl(addr);
 
 				/* check timeout */
-				if (get_timer(0) > CFG_FLASH_ERASE_TOUT) {
+				if (get_timer(0) > CONFIG_SYS_FLASH_ERASE_TOUT) {
 					writel(CMD_READ_ARRAY, addr + 1);
 					chip1 = TMO;
 					break;
@@ -342,7 +342,7 @@ volatile static int write_word(flash_info_t *info, ulong dest, ulong data)
 		result = readl(addr);
 
 		/* check timeout */
-		if (get_timer(0) > CFG_FLASH_ERASE_TOUT) {
+		if (get_timer(0) > CONFIG_SYS_FLASH_ERASE_TOUT) {
 			chip1 = ERR | TMO;
 			break;
 		}
diff --git a/board/sc520_cdp/sc520_cdp.c b/board/sc520_cdp/sc520_cdp.c
index 8050aa6fe..779f957d6 100644
--- a/board/sc520_cdp/sc520_cdp.c
+++ b/board/sc520_cdp/sc520_cdp.c
@@ -29,6 +29,7 @@
 #include <asm/ic/sc520.h>
 #include <asm/ic/ali512x.h>
 #include <spi.h>
+#include <netdev.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -86,7 +87,7 @@ static void irq_init(void)
 	write_mmcr_byte(SC520_ICEMAP, SC520_IRQ1);              /* Set ICE Debug Serielport INT to IRQ1 */
 	write_mmcr_byte(SC520_FERRMAP,SC520_IRQ13);             /* Set FP error INT to IRQ13 */
 
-	if (CFG_USE_SIO_UART) {
+	if (CONFIG_SYS_USE_SIO_UART) {
 		write_mmcr_byte(SC520_UART1MAP, SC520_IRQ_DISABLED); /* disable internal UART1 INT */
 		write_mmcr_byte(SC520_UART2MAP, SC520_IRQ_DISABLED); /* disable internal UART2 INT */
 		write_mmcr_byte(SC520_GP3IMAP, SC520_IRQ3);          /* Set GPIRQ3 (ISA IRQ3) to IRQ3 */
@@ -113,7 +114,7 @@ static void irq_init(void)
 
 }
 
-
+#ifdef CONFIG_PCI
 /* PCI stuff */
 static void pci_sc520_cdp_fixup_irq(struct pci_controller *hose, pci_dev_t dev)
 {
@@ -121,14 +122,14 @@ static void pci_sc520_cdp_fixup_irq(struct pci_controller *hose, pci_dev_t dev)
 	 * when we need one (a board with more pci interrupt pins
 	 * would use a larger table */
 	static int irq_list[] = {
-		CFG_FIRST_PCI_IRQ,
-		CFG_SECOND_PCI_IRQ,
-		CFG_THIRD_PCI_IRQ,
-		CFG_FORTH_PCI_IRQ
+		CONFIG_SYS_FIRST_PCI_IRQ,
+		CONFIG_SYS_SECOND_PCI_IRQ,
+		CONFIG_SYS_THIRD_PCI_IRQ,
+		CONFIG_SYS_FORTH_PCI_IRQ
 	};
 	static int next_irq_index=0;
 
-	char tmp_pin;
+	uchar tmp_pin;
 	int pin;
 
 	pci_hose_read_config_byte(hose, dev, PCI_INTERRUPT_PIN, &tmp_pin);
@@ -192,7 +193,7 @@ void pci_init_board(void)
 {
 	pci_sc520_init(&sc520_cdp_hose);
 }
-
+#endif
 
 static void silence_uart(int port)
 {
@@ -278,7 +279,7 @@ static void bus_init(void)
 
 	asm ("wbinvd\n"); /* Flush cache, req. after setting the unchached attribute ona PAR */
 
-	if (CFG_USE_SIO_UART) {
+	if (CONFIG_SYS_USE_SIO_UART) {
 		write_mmcr_byte(SC520_ADDDECCTL, read_mmcr_byte(SC520_ADDDECCTL) | UART2_DIS|UART1_DIS);
 		setup_ali_sio(1);
 	} else {
@@ -562,12 +563,12 @@ void spi_eeprom_probe(int x)
 {
 }
 
-int spi_eeprom_read(int x, int offset, char *buffer, int len)
+int spi_eeprom_read(int x, int offset, uchar *buffer, int len)
 {
        return 0;
 }
 
-int spi_eeprom_write(int x, int offset, char *buffer, int len)
+int spi_eeprom_write(int x, int offset, uchar *buffer, int len)
 {
        return 0;
 }
@@ -629,3 +630,8 @@ ssize_t spi_write(uchar *addr, int alen, uchar *buffer, int len)
 #endif
 	return res;
 }
+
+int board_eth_init(bd_t *bis)
+{
+	return pci_eth_init(bis);
+}
diff --git a/board/sc520_cdp/sc520_cdp_asm.S b/board/sc520_cdp/sc520_cdp_asm.S
index 6ac5a5de9..3a8a03f50 100644
--- a/board/sc520_cdp/sc520_cdp_asm.S
+++ b/board/sc520_cdp/sc520_cdp_asm.S
@@ -76,8 +76,8 @@ done:   movb	$0x88, %al
 	jmp	*%ebp		     /* return to caller */
 
 
-.globl show_boot_progress
-show_boot_progress:
+.globl show_boot_progress_asm
+show_boot_progress_asm:
 	out	%al, $0x80
 	xchg	%al, %ah
 	movw	$0x680, %dx
diff --git a/board/sc520_cdp/u-boot.lds b/board/sc520_cdp/u-boot.lds
index 96093263e..719ecbaa1 100644
--- a/board/sc520_cdp/u-boot.lds
+++ b/board/sc520_cdp/u-boot.lds
@@ -45,7 +45,7 @@ SECTIONS
 
 	. = ALIGN(4);
 	_i386boot_bss_start = ABSOLUTE(.);
-	.bss (NOLOAD) : { *(.bss) }
+	.bss (NOLOAD) : { *(.bss) . = ALIGN(4); }
 	_i386boot_bss_size = SIZEOF(.bss);
 
 
diff --git a/board/sc520_spunk/flash.c b/board/sc520_spunk/flash.c
index 0b4bf6889..d702046f9 100644
--- a/board/sc520_spunk/flash.c
+++ b/board/sc520_spunk/flash.c
@@ -228,7 +228,7 @@ ulong flash_init(void)
 		ulong flashbase = 0;
 		int sectsize = 0;
 
-		memset(flash_info[i].protect, 0, CFG_MAX_FLASH_SECT);
+		memset(flash_info[i].protect, 0, CONFIG_SYS_MAX_FLASH_SECT);
 		switch (i) {
 		case 0:
 			flashbase = SC520_FLASH_BANK0_BASE;
@@ -323,10 +323,10 @@ ulong flash_init(void)
 		      i386boot_start,
 		      i386boot_end,
 		      &flash_info[0]);
-#ifdef CFG_ENV_ADDR
+#ifdef CONFIG_ENV_ADDR
 	flash_protect(FLAG_PROTECT_SET,
-		      CFG_ENV_ADDR,
-		      CFG_ENV_ADDR + CFG_ENV_SIZE - 1,
+		      CONFIG_ENV_ADDR,
+		      CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1,
 		      &flash_info[0]);
 #endif
 	return size;
@@ -419,7 +419,7 @@ static u32 _amd_erase_flash(u32 addr, u32 sector)
 	while (((*(volatile u16*)(addr + sector)) & 0x0080) != 0x0080) {
 
 		elapsed += *(volatile u16*)(0xfffef000+SC520_SWTMRMILLI);
-		if (elapsed > ((CFG_FLASH_ERASE_TOUT/CFG_HZ) * 1000)) {
+		if (elapsed > ((CONFIG_SYS_FLASH_ERASE_TOUT/CONFIG_SYS_HZ) * 1000)) {
 			*(volatile u16*)(addr) = 0x00f0;
 			return 1;
 		}
@@ -467,7 +467,7 @@ static u32 _intel_erase_flash(u32 addr, u32 sector)
 	elapsed = 0;
 	while (((*(volatile u16*)(addr + sector)) & 0x0080) != 0x0080) {
 		elapsed += *(volatile u16*)(0xfffef000+SC520_SWTMRMILLI);
-		if (elapsed > ((CFG_FLASH_ERASE_TOUT/CFG_HZ) * 1000)) {
+		if (elapsed > ((CONFIG_SYS_FLASH_ERASE_TOUT/CONFIG_SYS_HZ) * 1000)) {
 			*(volatile u16*)(addr + sector) = 0x00B0;  /* suspend erase      */
 			*(volatile u16*)(addr + sector) = 0x00FF;  /* reset to read mode */
 			return 1;
@@ -602,7 +602,7 @@ static int _amd_write_word(unsigned start, unsigned dest, u16 data)
 		/* data polling for D7 */
 		while ((dest2[i] & 0x0080) != (data2[i] & 0x0080)) {
 			elapsed += *(volatile u16*)(0xfffef000+SC520_SWTMRMILLI);
-			if (elapsed > ((CFG_FLASH_WRITE_TOUT/CFG_HZ) * 1000)) {
+			if (elapsed > ((CONFIG_SYS_FLASH_WRITE_TOUT/CONFIG_SYS_HZ) * 1000)) {
 				addr2[i] = 0x00f0;
 				return 1;
 			}
@@ -639,7 +639,7 @@ static int _intel_write_word(unsigned start, unsigned dest, unsigned data)
 		/* data polling for D7 */
 		while ((*(volatile u16*)dest & 0x0080) != 0x0080) {
 			elapsed += *(volatile u16*)(0xfffef000+SC520_SWTMRMILLI);
-			if (elapsed > ((CFG_FLASH_WRITE_TOUT/CFG_HZ) * 1000)) {
+			if (elapsed > ((CONFIG_SYS_FLASH_WRITE_TOUT/CONFIG_SYS_HZ) * 1000)) {
 				*(volatile u16*)dest = 0x00ff;
 				return 1;
 			}
diff --git a/board/sc520_spunk/sc520_spunk.c b/board/sc520_spunk/sc520_spunk.c
index 038d47995..d3bd86930 100644
--- a/board/sc520_spunk/sc520_spunk.c
+++ b/board/sc520_spunk/sc520_spunk.c
@@ -25,6 +25,7 @@
 #include <common.h>
 #include <pci.h>
 #include <ssi.h>
+#include <netdev.h>
 #include <asm/io.h>
 #include <asm/pci.h>
 #include <asm/ic/sc520.h>
@@ -104,10 +105,10 @@ static void pci_sc520_spunk_fixup_irq(struct pci_controller *hose, pci_dev_t dev
 	 * when we need one (a board with more pci interrupt pins
 	 * would use a larger table */
 	static int irq_list[] = {
-		CFG_FIRST_PCI_IRQ,
-		CFG_SECOND_PCI_IRQ,
-		CFG_THIRD_PCI_IRQ,
-		CFG_FORTH_PCI_IRQ
+		CONFIG_SYS_FIRST_PCI_IRQ,
+		CONFIG_SYS_SECOND_PCI_IRQ,
+		CONFIG_SYS_THIRD_PCI_IRQ,
+		CONFIG_SYS_FORTH_PCI_IRQ
 	};
 	static int next_irq_index=0;
 
@@ -676,3 +677,8 @@ ssize_t spi_write(uchar *addr, int alen, uchar *buffer, int len)
 		spi_eeprom_write(1, offset, buffer, len) :
 	mw_eeprom_write(1, offset, buffer, len);
 }
+
+int board_eth_init(bd_t *bis)
+{
+	return pci_eth_init(bis);
+}
diff --git a/board/sc520_spunk/sc520_spunk_asm.S b/board/sc520_spunk/sc520_spunk_asm.S
index 3430b6adb..eda7e9110 100644
--- a/board/sc520_spunk/sc520_spunk_asm.S
+++ b/board/sc520_spunk/sc520_spunk_asm.S
@@ -73,8 +73,8 @@ done:   movl    $0xfffefc32,%edx
 	jmp	*%ebp		     /* return to caller */
 
 
-.globl show_boot_progress
-show_boot_progress:
+.globl show_boot_progress_asm
+show_boot_progress_asm:
 	movl    $0xfffefc32,%edx
 	xorw    $0xffff, %ax
 	movw    %ax,(%edx)
diff --git a/board/sc520_spunk/u-boot.lds b/board/sc520_spunk/u-boot.lds
index 33480d328..4d6603cb5 100644
--- a/board/sc520_spunk/u-boot.lds
+++ b/board/sc520_spunk/u-boot.lds
@@ -46,7 +46,7 @@ SECTIONS
 
 	. = ALIGN(4);
 	_i386boot_bss_start = ABSOLUTE(.);
-	.bss (NOLOAD) : { *(.bss) }
+	.bss (NOLOAD) : { *(.bss) . = ALIGN(4); }
 	_i386boot_bss_size = SIZEOF(.bss);
 
 
diff --git a/board/scb9328/flash.c b/board/scb9328/flash.c
index 304190cbf..c6f94aebb 100644
--- a/board/scb9328/flash.c
+++ b/board/scb9328/flash.c
@@ -82,7 +82,7 @@
 #endif
 
 
-flash_info_t flash_info[CFG_MAX_FLASH_BANKS];
+flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];
 
 static FLASH_BUS_RET flash_status_reg (void)
 {
@@ -109,7 +109,7 @@ static int flash_ready (ulong timeout)
 	return ok;
 }
 
-#if ( CFG_MAX_FLASH_BANKS != 1 )
+#if ( CONFIG_SYS_MAX_FLASH_BANKS != 1 )
 #  error "SCB9328 platform has only one flash bank!"
 #endif
 
@@ -120,11 +120,11 @@ ulong flash_init (void)
 	unsigned long address = SCB9328_FLASH_BASE;
 
 	flash_info[0].size = SCB9328_FLASH_BANK_SIZE;
-	flash_info[0].sector_count = CFG_MAX_FLASH_SECT;
+	flash_info[0].sector_count = CONFIG_SYS_MAX_FLASH_SECT;
 	flash_info[0].flash_id = INTEL_MANUFACT;
-	memset (flash_info[0].protect, 0, CFG_MAX_FLASH_SECT);
+	memset (flash_info[0].protect, 0, CONFIG_SYS_MAX_FLASH_SECT);
 
-	for (i = 0; i < CFG_MAX_FLASH_SECT; i++) {
+	for (i = 0; i < CONFIG_SYS_MAX_FLASH_SECT; i++) {
 		flash_info[0].start[i] = address;
 #ifdef SCB9328_FLASH_UNLOCK
 		/* Some devices are hw locked after start. */
@@ -137,13 +137,13 @@ ulong flash_init (void)
 	}
 
 	flash_protect (FLAG_PROTECT_SET,
-				   CFG_FLASH_BASE,
-				   CFG_FLASH_BASE + monitor_flash_len - 1,
+				   CONFIG_SYS_FLASH_BASE,
+				   CONFIG_SYS_FLASH_BASE + monitor_flash_len - 1,
 				   &flash_info[0]);
 
 	flash_protect (FLAG_PROTECT_SET,
-				   CFG_ENV_ADDR,
-				   CFG_ENV_ADDR + CFG_ENV_SIZE - 1, &flash_info[0]);
+				   CONFIG_ENV_ADDR,
+				   CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1, &flash_info[0]);
 
 	return SCB9328_FLASH_BANK_SIZE;
 }
@@ -209,7 +209,7 @@ int flash_erase (flash_info_t * info, int s_first, int s_last)
 
 		*address = FLASH_CMD (CFI_INTEL_CMD_BLOCK_ERASE);
 		*address = FLASH_CMD (CFI_INTEL_CMD_CONFIRM);
-		if (flash_ready (CFG_FLASH_ERASE_TOUT)) {
+		if (flash_ready (CONFIG_SYS_FLASH_ERASE_TOUT)) {
 			*address = FLASH_CMD (CFI_INTEL_CMD_CLEAR_STATUS_REGISTER);
 			printf ("ok.\n");
 		} else {
@@ -257,7 +257,7 @@ static int write_data (flash_info_t * info, ulong dest, FLASH_BUS data)
 	*address = FLASH_CMD (CFI_INTEL_CMD_PROGRAM1);
 	*address = data;
 
-	if (!flash_ready (CFG_FLASH_WRITE_TOUT)) {
+	if (!flash_ready (CONFIG_SYS_FLASH_WRITE_TOUT)) {
 		*address = FLASH_CMD (CFI_INTEL_CMD_SUSPEND);
 		rc = ERR_TIMOUT;
 		printf ("timeout! Aborting...\n");
diff --git a/board/scb9328/lowlevel_init.S b/board/scb9328/lowlevel_init.S
index ba3b6d241..8e6a49e32 100644
--- a/board/scb9328/lowlevel_init.S
+++ b/board/scb9328/lowlevel_init.S
@@ -29,13 +29,13 @@ lowlevel_init:
 
 /* Change PERCLK1DIV to 14 ie 14+1 */
 	ldr		r0,	=PCDR
-	ldr		r1,	=CFG_PCDR_VAL
+	ldr		r1,	=CONFIG_SYS_PCDR_VAL
 	str		r1,   [r0]
 
 /* set MCU PLL Control Register 0 */
 
 	ldr		r0,	=MPCTL0
-	ldr		r1,	=CFG_MPCTL0_VAL
+	ldr		r1,	=CONFIG_SYS_MPCTL0_VAL
 	str		r1,   [r0]
 
 /* set mpll restart bit */
@@ -57,7 +57,7 @@ lowlevel_init:
 /* set System PLL Control Register 0 */
 
 	ldr		r0,	=SPCTL0
-	ldr		r1,	=CFG_SPCTL0_VAL
+	ldr		r1,	=CONFIG_SYS_SPCTL0_VAL
 	str		r1,   [r0]
 
 /* set spll restart bit */
@@ -77,7 +77,7 @@ lowlevel_init:
 	bne		1b
 
 	ldr		r0,   =CSCR
-	ldr		r1,   =CFG_CSCR_VAL
+	ldr		r1,   =CONFIG_SYS_CSCR_VAL
 	str		r1,   [r0]
 
 /* I have now read the ARM920 DataSheet back-to-Back, and have stumbled upon
@@ -102,65 +102,65 @@ lowlevel_init:
 	MCR p15,0,r0,c1,c0,0
 
 	ldr		r0,	=GPR(0)
-	ldr		r1,	=CFG_GPR_A_VAL
+	ldr		r1,	=CONFIG_SYS_GPR_A_VAL
 	str		r1,   [r0]
 
 	ldr		r0,	=GIUS(0)
-	ldr		r1,	=CFG_GIUS_A_VAL
+	ldr		r1,	=CONFIG_SYS_GIUS_A_VAL
 	str		r1,   [r0]
 
 /* CS3 becomes CS3 by clearing reset default bit 1 in FMCR */
 
 	ldr		r0,	=FMCR
-	ldr		r1,	=CFG_FMCR_VAL
+	ldr		r1,	=CONFIG_SYS_FMCR_VAL
 	str		r1,   [r0]
 
 	ldr		r0,	=CS0U
-	ldr		r1,	=CFG_CS0U_VAL
+	ldr		r1,	=CONFIG_SYS_CS0U_VAL
 	str		r1,   [r0]
 
 	ldr		r0,	=CS0L
-	ldr		r1,	=CFG_CS0L_VAL
+	ldr		r1,	=CONFIG_SYS_CS0L_VAL
 	str		r1,   [r0]
 
 	ldr		r0,	=CS1U
-	ldr		r1,	=CFG_CS1U_VAL
+	ldr		r1,	=CONFIG_SYS_CS1U_VAL
 	str		r1,   [r0]
 
 	ldr		r0,	=CS1L
-	ldr		r1,	=CFG_CS1L_VAL
+	ldr		r1,	=CONFIG_SYS_CS1L_VAL
 	str		r1,   [r0]
 
 	ldr		r0,	=CS2U
-	ldr		r1,	=CFG_CS2U_VAL
+	ldr		r1,	=CONFIG_SYS_CS2U_VAL
 	str		r1,   [r0]
 
 	ldr		r0,	=CS2L
-	ldr		r1,	=CFG_CS2L_VAL
+	ldr		r1,	=CONFIG_SYS_CS2L_VAL
 	str		r1,   [r0]
 
 	ldr		r0,	=CS3U
-	ldr		r1,	=CFG_CS3U_VAL
+	ldr		r1,	=CONFIG_SYS_CS3U_VAL
 	str		r1,   [r0]
 
 	ldr		r0,	=CS3L
-	ldr		r1,	=CFG_CS3L_VAL
+	ldr		r1,	=CONFIG_SYS_CS3L_VAL
 	str		r1,   [r0]
 
 	ldr		r0,	=CS4U
-	ldr		r1,	=CFG_CS4U_VAL
+	ldr		r1,	=CONFIG_SYS_CS4U_VAL
 	str		r1,   [r0]
 
 	ldr		r0,	=CS4L
-	ldr		r1,	=CFG_CS4L_VAL
+	ldr		r1,	=CONFIG_SYS_CS4L_VAL
 	str		r1,   [r0]
 
 	ldr		r0,	=CS5U
-	ldr		r1,	=CFG_CS5U_VAL
+	ldr		r1,	=CONFIG_SYS_CS5U_VAL
 	str		r1,   [r0]
 
 	ldr		r0,	=CS5L
-	ldr		r1,	=CFG_CS5L_VAL
+	ldr		r1,	=CONFIG_SYS_CS5L_VAL
 	str		r1,   [r0]
 
 /* SDRAM Setup */
diff --git a/board/scb9328/u-boot.lds b/board/scb9328/u-boot.lds
index 46ed451ee..c96e58a84 100644
--- a/board/scb9328/u-boot.lds
+++ b/board/scb9328/u-boot.lds
@@ -52,6 +52,6 @@ SECTIONS
 
 	. = ALIGN(4);
 	__bss_start = .;
-	.bss (NOLOAD) : { *(.bss) }
+	.bss (NOLOAD) : { *(.bss) . = ALIGN(4); }
 	_end = .;
 }
diff --git a/board/shannon/flash.c b/board/shannon/flash.c
index 475b76b30..0455afa93 100644
--- a/board/shannon/flash.c
+++ b/board/shannon/flash.c
@@ -30,7 +30,7 @@ ulong myflush(void);
 #define FLASH_BANK_SIZE 0x400000	/* 4 MB */
 #define MAIN_SECT_SIZE  0x20000		/* 128 KB */
 
-flash_info_t    flash_info[CFG_MAX_FLASH_BANKS];
+flash_info_t    flash_info[CONFIG_SYS_MAX_FLASH_BANKS];
 
 
 #define CMD_READ_ARRAY		0x00F000F0
@@ -41,8 +41,8 @@ flash_info_t    flash_info[CFG_MAX_FLASH_BANKS];
 #define CMD_PROGRAM		0x00A000A0
 #define CMD_UNLOCK_BYPASS	0x00200020
 
-#define MEM_FLASH_ADDR1		(*(volatile u32 *)(CFG_FLASH_BASE + (0x00000555 << 2)))
-#define MEM_FLASH_ADDR2		(*(volatile u32 *)(CFG_FLASH_BASE + (0x000002AA << 2)))
+#define MEM_FLASH_ADDR1		(*(volatile u32 *)(CONFIG_SYS_FLASH_BASE + (0x00000555 << 2)))
+#define MEM_FLASH_ADDR2		(*(volatile u32 *)(CONFIG_SYS_FLASH_BASE + (0x000002AA << 2)))
 
 #define BIT_ERASE_DONE		0x00800080
 #define BIT_RDY_MASK		0x00800080
@@ -61,15 +61,15 @@ ulong flash_init(void)
     int i, j;
     ulong size = 0;
 
-    for (i = 0; i < CFG_MAX_FLASH_BANKS; i++)
+    for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++)
     {
 	ulong flashbase = 0;
 	flash_info[i].flash_id =
 	  (AMD_MANUFACT & FLASH_VENDMASK) |
 	  (AMD_ID_LV160B & FLASH_TYPEMASK);
 	flash_info[i].size = FLASH_BANK_SIZE;
-	flash_info[i].sector_count = CFG_MAX_FLASH_SECT;
-	memset(flash_info[i].protect, 0, CFG_MAX_FLASH_SECT);
+	flash_info[i].sector_count = CONFIG_SYS_MAX_FLASH_SECT;
+	memset(flash_info[i].protect, 0, CONFIG_SYS_MAX_FLASH_SECT);
 	if (i == 0)
 	  flashbase = PHYS_FLASH_1;
 	else
@@ -112,24 +112,24 @@ ulong flash_init(void)
 #ifdef CONFIG_INFERNO
     /* first one, 0x00000 to 0x07fff */
     flash_protect(FLAG_PROTECT_SET,
-		  CFG_FLASH_BASE + 0x00000,
-		  CFG_FLASH_BASE + 0x08000 - 1,
+		  CONFIG_SYS_FLASH_BASE + 0x00000,
+		  CONFIG_SYS_FLASH_BASE + 0x08000 - 1,
 		  &flash_info[0]);
 
     /* third to 10th, 0x0c000 - 0xdffff */
     flash_protect(FLAG_PROTECT_SET,
-		  CFG_FLASH_BASE + 0x0c000,
-		  CFG_FLASH_BASE + 0xe0000 - 1,
+		  CONFIG_SYS_FLASH_BASE + 0x0c000,
+		  CONFIG_SYS_FLASH_BASE + 0xe0000 - 1,
 		  &flash_info[0]);
 #else
     flash_protect(FLAG_PROTECT_SET,
-		  CFG_FLASH_BASE,
-		  CFG_FLASH_BASE + monitor_flash_len - 1,
+		  CONFIG_SYS_FLASH_BASE,
+		  CONFIG_SYS_FLASH_BASE + monitor_flash_len - 1,
 		  &flash_info[0]);
 
     flash_protect(FLAG_PROTECT_SET,
-		  CFG_ENV_ADDR,
-		  CFG_ENV_ADDR + CFG_ENV_SIZE - 1,
+		  CONFIG_ENV_ADDR,
+		  CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1,
 		  &flash_info[0]);
 #endif
     return size;
@@ -253,7 +253,7 @@ int	flash_erase (flash_info_t *info, int s_first, int s_last)
 		result = *addr;
 
 		/* check timeout */
-		if (get_timer_masked() > CFG_FLASH_ERASE_TOUT)
+		if (get_timer_masked() > CONFIG_SYS_FLASH_ERASE_TOUT)
 		{
 		    MEM_FLASH_ADDR1 = CMD_READ_ARRAY;
 		    chip1 = TMO;
@@ -358,7 +358,7 @@ static int write_word (flash_info_t *info, ulong dest, ulong data)
 	result = *addr;
 
 	/* check timeout */
-	if (get_timer_masked() > CFG_FLASH_ERASE_TOUT)
+	if (get_timer_masked() > CONFIG_SYS_FLASH_ERASE_TOUT)
 	{
 	    chip1 = ERR | TMO;
 	    break;
diff --git a/board/shannon/u-boot.lds b/board/shannon/u-boot.lds
index 6bd06270a..fce2533ce 100644
--- a/board/shannon/u-boot.lds
+++ b/board/shannon/u-boot.lds
@@ -51,6 +51,6 @@ SECTIONS
 
 	. = ALIGN(4);
 	__bss_start = .;
-	.bss (NOLOAD) : { *(.bss) }
+	.bss (NOLOAD) : { *(.bss) . = ALIGN(4); }
 	_end = .;
 }
diff --git a/board/siemens/CCM/ccm.c b/board/siemens/CCM/ccm.c
index d65376328..8053da481 100644
--- a/board/siemens/CCM/ccm.c
+++ b/board/siemens/CCM/ccm.c
@@ -133,7 +133,7 @@ int checkboard (void)
 int power_on_reset(void)
 {
     /* Test Reset Status Register */
-    return ((volatile immap_t *)CFG_IMMR)->im_clkrst.car_rsr & RSR_CSRS ? 0:1;
+    return ((volatile immap_t *)CONFIG_SYS_IMMR)->im_clkrst.car_rsr & RSR_CSRS ? 0:1;
 }
 
 #define PB_LED_GREEN	0x10000		/* red LED is on PB.15 */
@@ -142,7 +142,7 @@ int power_on_reset(void)
 
 static void init_leds (void)
 {
-    volatile immap_t *immap  = (immap_t *)CFG_IMMR;
+    volatile immap_t *immap  = (immap_t *)CONFIG_SYS_IMMR;
 
     immap->im_cpm.cp_pbpar &= ~PB_LEDS;
     immap->im_cpm.cp_pbodr &= ~PB_LEDS;
@@ -157,7 +157,7 @@ static void init_leds (void)
 
 phys_size_t initdram (int board_type)
 {
-    volatile immap_t     *immap  = (immap_t *)CFG_IMMR;
+    volatile immap_t     *immap  = (immap_t *)CONFIG_SYS_IMMR;
     volatile memctl8xx_t *memctl = &immap->im_memctl;
     long int size8, size9;
     long int size = 0;
@@ -171,7 +171,7 @@ phys_size_t initdram (int board_type)
      * with two SDRAM banks or four cycles every 31.2 us with one
      * bank. It will be adjusted after memory sizing.
      */
-    memctl->memc_mptpr = CFG_MPTPR_2BK_8K;
+    memctl->memc_mptpr = CONFIG_SYS_MPTPR_2BK_8K;
 
     memctl->memc_mar  = 0x00000088;
 
@@ -180,10 +180,10 @@ phys_size_t initdram (int board_type)
      * preliminary addresses - these have to be modified after the
      * SDRAM size has been determined.
      */
-    memctl->memc_or2 = CFG_OR2_PRELIM;
-    memctl->memc_br2 = CFG_BR2_PRELIM;
+    memctl->memc_or2 = CONFIG_SYS_OR2_PRELIM;
+    memctl->memc_br2 = CONFIG_SYS_BR2_PRELIM;
 
-    memctl->memc_mamr = CFG_MAMR_8COL & (~(MAMR_PTAE)); /* no refresh yet */
+    memctl->memc_mamr = CONFIG_SYS_MAMR_8COL & (~(MAMR_PTAE)); /* no refresh yet */
 
     udelay(200);
 
@@ -203,21 +203,21 @@ phys_size_t initdram (int board_type)
      *
      * try 8 column mode
      */
-    size8 = dram_size (CFG_MAMR_8COL, SDRAM_BASE2_PRELIM, SDRAM_MAX_SIZE);
+    size8 = dram_size (CONFIG_SYS_MAMR_8COL, SDRAM_BASE2_PRELIM, SDRAM_MAX_SIZE);
 
     udelay (1000);
 
     /*
      * try 9 column mode
      */
-    size9 = dram_size (CFG_MAMR_9COL, SDRAM_BASE2_PRELIM, SDRAM_MAX_SIZE);
+    size9 = dram_size (CONFIG_SYS_MAMR_9COL, SDRAM_BASE2_PRELIM, SDRAM_MAX_SIZE);
 
     if (size8 < size9) {		/* leave configuration at 9 columns	*/
 	size = size9;
 /*	debug ("SDRAM in 9 column mode: %ld MB\n", size >> 20);	*/
     } else {				/* back to 8 columns			*/
 	size = size8;
-	memctl->memc_mamr = CFG_MAMR_8COL;
+	memctl->memc_mamr = CONFIG_SYS_MAMR_8COL;
 	udelay(500);
 /*	debug ("SDRAM in 8 column mode: %ld MB\n", size >> 20);	*/
     }
@@ -230,7 +230,7 @@ phys_size_t initdram (int board_type)
      */
     if (size < 0x02000000) {
 	/* reduce to 15.6 us (62.4 us / quad) */
-	memctl->memc_mptpr = CFG_MPTPR_2BK_4K;
+	memctl->memc_mptpr = CONFIG_SYS_MPTPR_2BK_4K;
 	udelay(1000);
     }
 
@@ -238,13 +238,13 @@ phys_size_t initdram (int board_type)
      * Final mapping
      */
 
-    memctl->memc_or2 = ((-size) & 0xFFFF0000) | CFG_OR_TIMING_SDRAM;
-    memctl->memc_br2 = (CFG_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V;
+    memctl->memc_or2 = ((-size) & 0xFFFF0000) | CONFIG_SYS_OR_TIMING_SDRAM;
+    memctl->memc_br2 = (CONFIG_SYS_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V;
 
 
     /* adjust refresh rate depending on SDRAM type, one bank */
     reg = memctl->memc_mptpr;
-    reg >>= 1;	/* reduce to CFG_MPTPR_1BK_8K / _4K */
+    reg >>= 1;	/* reduce to CONFIG_SYS_MPTPR_1BK_8K / _4K */
     memctl->memc_mptpr = reg;
 
     can_driver_enable ();
@@ -263,7 +263,7 @@ phys_size_t initdram (int board_type)
  */
 void can_driver_enable (void)
 {
-    volatile immap_t     *immap  = (immap_t *)CFG_IMMR;
+    volatile immap_t     *immap  = (immap_t *)CONFIG_SYS_IMMR;
     volatile memctl8xx_t *memctl = &immap->im_memctl;
 
     /* Initialize MBMR */
@@ -302,13 +302,13 @@ void can_driver_enable (void)
     memctl->memc_mcr = 0x011C | UPMB;
 
     /* Initialize OR3 / BR3 for CAN Bus Controller */
-    memctl->memc_or3 = CFG_OR3_CAN;
-    memctl->memc_br3 = CFG_BR3_CAN;
+    memctl->memc_or3 = CONFIG_SYS_OR3_CAN;
+    memctl->memc_br3 = CONFIG_SYS_BR3_CAN;
 }
 
 void can_driver_disable (void)
 {
-    volatile immap_t     *immap  = (immap_t *)CFG_IMMR;
+    volatile immap_t     *immap  = (immap_t *)CONFIG_SYS_IMMR;
     volatile memctl8xx_t *memctl = &immap->im_memctl;
 
     /* Reset OR3 / BR3 to disable  CAN Bus Controller */
@@ -331,7 +331,7 @@ void can_driver_disable (void)
 
 static long int dram_size (long int mamr_value, long int *base, long int maxsize)
 {
-    volatile immap_t     *immap  = (immap_t *)CFG_IMMR;
+    volatile immap_t     *immap  = (immap_t *)CONFIG_SYS_IMMR;
     volatile memctl8xx_t *memctl = &immap->im_memctl;
 
     memctl->memc_mamr = mamr_value;
@@ -341,24 +341,24 @@ static long int dram_size (long int mamr_value, long int *base, long int maxsize
 
 /* ------------------------------------------------------------------------- */
 
-#define	ETH_CFG_BITS	(CFG_PB_ETH_CFG1 | CFG_PB_ETH_CFG2  | CFG_PB_ETH_CFG3 )
+#define	ETH_CFG_BITS	(CONFIG_SYS_PB_ETH_CFG1 | CONFIG_SYS_PB_ETH_CFG2  | CONFIG_SYS_PB_ETH_CFG3 )
 
-#define ETH_ALL_BITS	(ETH_CFG_BITS | CFG_PB_ETH_POWERDOWN)
+#define ETH_ALL_BITS	(ETH_CFG_BITS | CONFIG_SYS_PB_ETH_POWERDOWN)
 
 void	reset_phy(void)
 {
-	immap_t *immr = (immap_t *)CFG_IMMR;
+	immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
 	ulong value;
 
 	/* Configure all needed port pins for GPIO */
-#ifdef CFG_ETH_MDDIS_VALUE
-	immr->im_ioport.iop_padat |=   CFG_PA_ETH_MDDIS;
+#ifdef CONFIG_SYS_ETH_MDDIS_VALUE
+	immr->im_ioport.iop_padat |=   CONFIG_SYS_PA_ETH_MDDIS;
 #else
-	immr->im_ioport.iop_padat &= ~(CFG_PA_ETH_MDDIS | CFG_PA_ETH_RESET);	/* Set low */
+	immr->im_ioport.iop_padat &= ~(CONFIG_SYS_PA_ETH_MDDIS | CONFIG_SYS_PA_ETH_RESET);	/* Set low */
 #endif
-	immr->im_ioport.iop_papar &= ~(CFG_PA_ETH_MDDIS | CFG_PA_ETH_RESET);	/* GPIO */
-	immr->im_ioport.iop_paodr &= ~(CFG_PA_ETH_MDDIS | CFG_PA_ETH_RESET);	/* active output */
-	immr->im_ioport.iop_padir |=   CFG_PA_ETH_MDDIS | CFG_PA_ETH_RESET;	/* output */
+	immr->im_ioport.iop_papar &= ~(CONFIG_SYS_PA_ETH_MDDIS | CONFIG_SYS_PA_ETH_RESET);	/* GPIO */
+	immr->im_ioport.iop_paodr &= ~(CONFIG_SYS_PA_ETH_MDDIS | CONFIG_SYS_PA_ETH_RESET);	/* active output */
+	immr->im_ioport.iop_padir |=   CONFIG_SYS_PA_ETH_MDDIS | CONFIG_SYS_PA_ETH_RESET;	/* output */
 
 	immr->im_cpm.cp_pbpar &= ~(ETH_ALL_BITS);	/* GPIO */
 	immr->im_cpm.cp_pbodr &= ~(ETH_ALL_BITS);	/* active output */
@@ -366,23 +366,23 @@ void	reset_phy(void)
 	value  = immr->im_cpm.cp_pbdat;
 
 	/* Assert Powerdown and Reset signals */
-	value |=  CFG_PB_ETH_POWERDOWN;
+	value |=  CONFIG_SYS_PB_ETH_POWERDOWN;
 
 	/* PHY configuration includes MDDIS and CFG1 ... CFG3 */
-#ifdef CFG_ETH_CFG1_VALUE
-	value |=   CFG_PB_ETH_CFG1;
+#ifdef CONFIG_SYS_ETH_CFG1_VALUE
+	value |=   CONFIG_SYS_PB_ETH_CFG1;
 #else
-	value &= ~(CFG_PB_ETH_CFG1);
+	value &= ~(CONFIG_SYS_PB_ETH_CFG1);
 #endif
-#ifdef CFG_ETH_CFG2_VALUE
-	value |=   CFG_PB_ETH_CFG2;
+#ifdef CONFIG_SYS_ETH_CFG2_VALUE
+	value |=   CONFIG_SYS_PB_ETH_CFG2;
 #else
-	value &= ~(CFG_PB_ETH_CFG2);
+	value &= ~(CONFIG_SYS_PB_ETH_CFG2);
 #endif
-#ifdef CFG_ETH_CFG3_VALUE
-	value |=   CFG_PB_ETH_CFG3;
+#ifdef CONFIG_SYS_ETH_CFG3_VALUE
+	value |=   CONFIG_SYS_PB_ETH_CFG3;
 #else
-	value &= ~(CFG_PB_ETH_CFG3);
+	value &= ~(CONFIG_SYS_PB_ETH_CFG3);
 #endif
 
 	/* Drive output signals to initial state */
@@ -391,11 +391,11 @@ void	reset_phy(void)
 	udelay (10000);
 
 	/* De-assert Ethernet Powerdown */
-	immr->im_cpm.cp_pbdat &= ~(CFG_PB_ETH_POWERDOWN); /* Enable PHY power */
+	immr->im_cpm.cp_pbdat &= ~(CONFIG_SYS_PB_ETH_POWERDOWN); /* Enable PHY power */
 	udelay (10000);
 
 	/* de-assert RESET signal of PHY */
-	immr->im_ioport.iop_padat |= CFG_PA_ETH_RESET;
+	immr->im_ioport.iop_padat |= CONFIG_SYS_PA_ETH_RESET;
 	udelay (1000);
 }
 
diff --git a/board/siemens/CCM/flash.c b/board/siemens/CCM/flash.c
index 9c32785b4..ad1ed793d 100644
--- a/board/siemens/CCM/flash.c
+++ b/board/siemens/CCM/flash.c
@@ -24,7 +24,7 @@
 #include <common.h>
 #include <mpc8xx.h>
 
-flash_info_t	flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips	*/
+flash_info_t	flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips	*/
 
 /*-----------------------------------------------------------------------
  * Functions
@@ -38,13 +38,13 @@ static void flash_get_offsets (ulong base, flash_info_t *info);
 
 unsigned long flash_init (void)
 {
-	volatile immap_t     *immap  = (immap_t *)CFG_IMMR;
+	volatile immap_t     *immap  = (immap_t *)CONFIG_SYS_IMMR;
 	volatile memctl8xx_t *memctl = &immap->im_memctl;
 	unsigned long size_b0, size_b1;
 	int i;
 
 	/* Init: no FLASHes known */
-	for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) {
+	for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
 		flash_info[i].flash_id = FLASH_UNKNOWN;
 	}
 
@@ -75,38 +75,38 @@ unsigned long flash_init (void)
 	}
 
 	/* Remap FLASH according to real size */
-	memctl->memc_or0 = CFG_OR_TIMING_FLASH | (-size_b0 & 0xFFFF8000);
-	memctl->memc_br0 = (CFG_FLASH_BASE & BR_BA_MSK) | BR_MS_GPCM | BR_V;
+	memctl->memc_or0 = CONFIG_SYS_OR_TIMING_FLASH | (-size_b0 & 0xFFFF8000);
+	memctl->memc_br0 = (CONFIG_SYS_FLASH_BASE & BR_BA_MSK) | BR_MS_GPCM | BR_V;
 
 	/* Re-do sizing to get full correct info */
-	size_b0 = flash_get_size((vu_long *)CFG_FLASH_BASE, &flash_info[0]);
+	size_b0 = flash_get_size((vu_long *)CONFIG_SYS_FLASH_BASE, &flash_info[0]);
 
-	flash_get_offsets (CFG_FLASH_BASE, &flash_info[0]);
+	flash_get_offsets (CONFIG_SYS_FLASH_BASE, &flash_info[0]);
 
-#if CFG_MONITOR_BASE >= CFG_FLASH_BASE
+#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE
 	/* monitor protection ON by default */
 	flash_protect(FLAG_PROTECT_SET,
-		      CFG_MONITOR_BASE,
-		      CFG_MONITOR_BASE+monitor_flash_len-1,
+		      CONFIG_SYS_MONITOR_BASE,
+		      CONFIG_SYS_MONITOR_BASE+monitor_flash_len-1,
 		      &flash_info[0]);
 #endif
 
 	if (size_b1) {
-		memctl->memc_or1 = CFG_OR_TIMING_FLASH | (-size_b1 & 0xFFFF8000);
-		memctl->memc_br1 = ((CFG_FLASH_BASE + size_b0) & BR_BA_MSK) |
+		memctl->memc_or1 = CONFIG_SYS_OR_TIMING_FLASH | (-size_b1 & 0xFFFF8000);
+		memctl->memc_br1 = ((CONFIG_SYS_FLASH_BASE + size_b0) & BR_BA_MSK) |
 				    BR_MS_GPCM | BR_V;
 
 		/* Re-do sizing to get full correct info */
-		size_b1 = flash_get_size((vu_long *)(CFG_FLASH_BASE + size_b0),
+		size_b1 = flash_get_size((vu_long *)(CONFIG_SYS_FLASH_BASE + size_b0),
 					  &flash_info[1]);
 
-		flash_get_offsets (CFG_FLASH_BASE + size_b0, &flash_info[1]);
+		flash_get_offsets (CONFIG_SYS_FLASH_BASE + size_b0, &flash_info[1]);
 
-#if CFG_MONITOR_BASE >= CFG_FLASH_BASE
+#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE
 		/* monitor protection ON by default */
 		flash_protect(FLAG_PROTECT_SET,
-			      CFG_MONITOR_BASE,
-			      CFG_MONITOR_BASE+monitor_flash_len-1,
+			      CONFIG_SYS_MONITOR_BASE,
+			      CONFIG_SYS_MONITOR_BASE+monitor_flash_len-1,
 			      &flash_info[1]);
 #endif
 	} else {
@@ -419,7 +419,7 @@ int	flash_erase (flash_info_t *info, int s_first, int s_last)
 	last  = start;
 	addr = (vu_long*)(info->start[l_sect]);
 	while ((addr[0] & 0x00800080) != 0x00800080) {
-		if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+		if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
 			printf ("Timeout\n");
 			return 1;
 		}
@@ -542,7 +542,7 @@ static int write_word (flash_info_t *info, ulong dest, ulong data)
 	/* data polling for D7 */
 	start = get_timer (0);
 	while ((*((vu_long *)dest) & 0x00800080) != (data & 0x00800080)) {
-		if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+		if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
 			return (1);
 		}
 	}
diff --git a/board/siemens/CCM/fpga_ccm.c b/board/siemens/CCM/fpga_ccm.c
index 11b97bcaa..50b08abce 100644
--- a/board/siemens/CCM/fpga_ccm.c
+++ b/board/siemens/CCM/fpga_ccm.c
@@ -31,7 +31,7 @@
 
 fpga_t fpga_list[] = {
     { "PUMA" , PUMA_CONF_BASE ,
-      CFG_PC_PUMA_INIT , CFG_PC_PUMA_PROG , CFG_PC_PUMA_DONE  }
+      CONFIG_SYS_PC_PUMA_INIT , CONFIG_SYS_PC_PUMA_PROG , CONFIG_SYS_PC_PUMA_DONE  }
 };
 int fpga_count = sizeof(fpga_list) / sizeof(fpga_t);
 
@@ -90,7 +90,7 @@ const uint puma_table[] =
 
 ulong fpga_control (fpga_t* fpga, int cmd)
 {
-    volatile immap_t     *immr  = (immap_t *)CFG_IMMR;
+    volatile immap_t     *immr  = (immap_t *)CONFIG_SYS_IMMR;
     volatile memctl8xx_t *memctl = &immr->im_memctl;
 
     switch (cmd) {
diff --git a/board/siemens/CCM/u-boot.lds b/board/siemens/CCM/u-boot.lds
index 10b38ec35..ef9a2515c 100644
--- a/board/siemens/CCM/u-boot.lds
+++ b/board/siemens/CCM/u-boot.lds
@@ -63,7 +63,7 @@ SECTIONS
     lib_generic/zlib.o		(.text)
 
     . = env_offset;
-    common/environment.o(.text)
+    common/env_embedded.o(.text)
 
     *(.text)
     *(.fixup)
@@ -134,6 +134,7 @@ SECTIONS
    *(.dynbss)
    *(.bss)
    *(COMMON)
+   . = ALIGN(4);
   }
   _end = . ;
   PROVIDE (end = .);
diff --git a/board/siemens/CCM/u-boot.lds.debug b/board/siemens/CCM/u-boot.lds.debug
index bf6399197..88dbd3810 100644
--- a/board/siemens/CCM/u-boot.lds.debug
+++ b/board/siemens/CCM/u-boot.lds.debug
@@ -61,7 +61,7 @@ SECTIONS
     lib_generic/crc32.o		(.text)
 /*
     . = env_offset;
-    common/environment.o(.text)
+    common/env_embedded.o(.text)
 */
     *(.text)
     *(.fixup)
diff --git a/board/siemens/IAD210/IAD210.c b/board/siemens/IAD210/IAD210.c
index 9c0ff0278..e21bb245a 100644
--- a/board/siemens/IAD210/IAD210.c
+++ b/board/siemens/IAD210/IAD210.c
@@ -102,7 +102,7 @@ const uint sdram_table[] = {
 
 phys_size_t initdram (int board_type)
 {
-	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
 	volatile memctl8xx_t *memctl = &immap->im_memctl;
 	volatile iop8xx_t *iop = &immap->im_ioport;
 	volatile fec_t *fecp = &immap->im_cpm.cp_fec;
@@ -117,7 +117,7 @@ phys_size_t initdram (int board_type)
 	 * with two SDRAM banks or four cycles every 31.2 us with one
 	 * bank. It will be adjusted after memory sizing.
 	 */
-	memctl->memc_mptpr = CFG_MPTPR;
+	memctl->memc_mptpr = CONFIG_SYS_MPTPR;
 
 	memctl->memc_mar = 0x00000088;
 
@@ -126,10 +126,10 @@ phys_size_t initdram (int board_type)
 	 * preliminary addresses - these have to be modified after the
 	 * SDRAM size has been determined.
 	 */
-	memctl->memc_or2 = CFG_OR2_PRELIM;
-	memctl->memc_br2 = CFG_BR2_PRELIM;
+	memctl->memc_or2 = CONFIG_SYS_OR2_PRELIM;
+	memctl->memc_br2 = CONFIG_SYS_BR2_PRELIM;
 
-	memctl->memc_mamr = CFG_MAMR & (~(MAMR_PTAE));	/* no refresh yet */
+	memctl->memc_mamr = CONFIG_SYS_MAMR & (~(MAMR_PTAE));	/* no refresh yet */
 
 	udelay (200);
 
@@ -155,20 +155,20 @@ phys_size_t initdram (int board_type)
 	 * Check Bank 0 Memory Size for re-configuration
 	 *
 	 */
-	size = dram_size (CFG_MAMR, (long *) SDRAM_BASE_PRELIM,
+	size = dram_size (CONFIG_SYS_MAMR, (long *) SDRAM_BASE_PRELIM,
 			  SDRAM_MAX_SIZE);
 
 	udelay (1000);
 
 
-	memctl->memc_mamr = CFG_MAMR;
+	memctl->memc_mamr = CONFIG_SYS_MAMR;
 	udelay (1000);
 
 	/*
 	 * Final mapping
 	 */
-	memctl->memc_or2 = ((-size) & 0xFFFF0000) | CFG_OR2_PRELIM;
-	memctl->memc_br2 = ((CFG_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V);
+	memctl->memc_or2 = ((-size) & 0xFFFF0000) | CONFIG_SYS_OR2_PRELIM;
+	memctl->memc_br2 = ((CONFIG_SYS_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V);
 
 	udelay (10000);
 
@@ -195,7 +195,7 @@ phys_size_t initdram (int board_type)
 static long int dram_size (long int mamr_value, long int *base,
 			   long int maxsize)
 {
-	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
 	volatile memctl8xx_t *memctl = &immap->im_memctl;
 
 	memctl->memc_mamr = mamr_value;
@@ -219,7 +219,7 @@ void board_serial_init (void)
 
 void board_ether_init (void)
 {
-	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
 	volatile iop8xx_t *iop = &immap->im_ioport;
 	volatile fec_t *fecp = &immap->im_cpm.cp_fec;
 
@@ -230,7 +230,7 @@ void board_ether_init (void)
 
 int board_early_init_f (void)
 {
-	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
 	volatile cpmtimer8xx_t *timers = &immap->im_cpmtimer;
 	volatile memctl8xx_t *memctl = &immap->im_memctl;
 	volatile iop8xx_t *iop = &immap->im_ioport;
@@ -240,7 +240,7 @@ int board_early_init_f (void)
 	iop->iop_padir = 0x0800;
 
 	/* start timer 2 for the 4hz LED blink rate */
-	timers->cpmt_tmr2 = 0xff2c;	/* 4hz for 64mhz */
+	timers->cpmt_tmr2 = 0xff2c;	/* 4HZ for 64MHz */
 	timers->cpmt_trr2 = 0x000003d0;	/* clk/16 , prescale=256 */
 	timers->cpmt_tgcr = 0x00000810;	/* run timer 2 */
 
@@ -261,7 +261,7 @@ int board_early_init_f (void)
 void board_get_enetaddr (uchar * addr)
 {
 	int i;
-	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
 	volatile cpm8xx_t *cpm = &immap->im_cpm;
 	unsigned int rccrtmp;
 
diff --git a/board/siemens/IAD210/atm.c b/board/siemens/IAD210/atm.c
index 1b27f336b..e599c1061 100644
--- a/board/siemens/IAD210/atm.c
+++ b/board/siemens/IAD210/atm.c
@@ -57,7 +57,7 @@ void   atmUtpInit(void);
  ****************************************************************************/
 int atmLoad()
 {
-  volatile immap_t       *immap  = (immap_t *)CFG_IMMR;
+  volatile immap_t       *immap  = (immap_t *)CONFIG_SYS_IMMR;
   volatile cpmtimer8xx_t *timers = &immap->im_cpmtimer;
   volatile iop8xx_t      *iop    = &immap->im_ioport;
 
@@ -91,7 +91,7 @@ int atmLoad()
  ****************************************************************************/
 void atmUnload()
 {
-  volatile immap_t       *immap  = (immap_t *)CFG_IMMR;
+  volatile immap_t       *immap  = (immap_t *)CONFIG_SYS_IMMR;
   volatile cpmtimer8xx_t *timers = &immap->im_cpmtimer;
   volatile iop8xx_t      *iop    = &immap->im_ioport;
 
@@ -141,11 +141,11 @@ void atmUnload()
 int atmMemInit()
 {
   int i;
-  unsigned immr = CFG_IMMR;
+  unsigned immr = CONFIG_SYS_IMMR;
   int total_num_rbd = 0;
   int total_num_tbd = 0;
 
-  memset((char *)CFG_IMMR + 0x2000 + ATM_DPRAM_BEGIN, 0x00, ATM_DPRAM_SIZE);
+  memset((char *)CONFIG_SYS_IMMR + 0x2000 + ATM_DPRAM_BEGIN, 0x00, ATM_DPRAM_SIZE);
 
   g_atm.csram_size = NUM_INT_ENTRIES * SIZE_OF_INT_ENTRY;
 
@@ -226,11 +226,11 @@ void atmIntInit()
 void atmApcInit()
 {
   int i;
-  /* unsigned immr = CFG_IMMR; */
-  uint16 * mphypt_ptr = MPHYPT_PTR(CFG_IMMR);
-  struct apc_params_t * apcp_ptr = APCP_PTR(CFG_IMMR);
-  uint16 * apct_prio1_ptr = APCT1_PTR(CFG_IMMR);
-  uint16 * tq_ptr = TQ_PTR(CFG_IMMR);
+  /* unsigned immr = CONFIG_SYS_IMMR; */
+  uint16 * mphypt_ptr = MPHYPT_PTR(CONFIG_SYS_IMMR);
+  struct apc_params_t * apcp_ptr = APCP_PTR(CONFIG_SYS_IMMR);
+  uint16 * apct_prio1_ptr = APCT1_PTR(CONFIG_SYS_IMMR);
+  uint16 * tq_ptr = TQ_PTR(CONFIG_SYS_IMMR);
   /***************************************************/
   /* Initialize MPHY Pointing Table (only one entry) */
   /***************************************************/
@@ -290,7 +290,7 @@ void atmApcInit()
  ****************************************************************************/
 void atmAmtInit()
 {
-  unsigned immr = CFG_IMMR;
+  unsigned immr = CONFIG_SYS_IMMR;
 
   g_atm.am_top = AM_PTR(immr);
   g_atm.ap_top = AP_PTR(immr);
@@ -315,7 +315,7 @@ void atmAmtInit()
  ****************************************************************************/
 void atmCpmInit()
 {
-  unsigned immr = CFG_IMMR;
+  unsigned immr = CONFIG_SYS_IMMR;
 
   memset((char *)immr + 0x3F00, 0x00, 0xC0);
 
@@ -551,7 +551,7 @@ void atmCpmInit()
  ****************************************************************************/
 void atmUtpInit()
 {
-  volatile immap_t       *immap  = (immap_t *)CFG_IMMR;
+  volatile immap_t       *immap  = (immap_t *)CONFIG_SYS_IMMR;
   volatile iop8xx_t      *iop    = &immap->im_ioport;
   volatile car8xx_t	 *car    = &immap->im_clkrst;
   volatile cpm8xx_t	 *cpm    = &immap->im_cpm;
@@ -579,7 +579,7 @@ void atmUtpInit()
   /*                    11 = divide by 7                             */
   /*                                                                 */
   /* Note that the UTOPIA clock must be programmed as to operate     */
-  /* within the range SYSCLK/10 .. 50Mhz.                            */
+  /* within the range SYSCLK/10 .. 50MHz.                            */
   /*-----------------------------------------------------------------*/
   car->car_sccr &= 0xFFFFFFE0;
   car->car_sccr |= 0x00000008; /* UTPCLK = SYSCLK / 4 */
diff --git a/board/siemens/IAD210/atm.h b/board/siemens/IAD210/atm.h
index 71b049725..cd5b45e86 100644
--- a/board/siemens/IAD210/atm.h
+++ b/board/siemens/IAD210/atm.h
@@ -6,9 +6,9 @@ typedef volatile unsigned short vuint16;
 typedef volatile unsigned int vuint32;
 
 
-#define DPRAM_ATM CFG_IMMR + 0x3000
+#define DPRAM_ATM CONFIG_SYS_IMMR + 0x3000
 
-#define ATM_DPRAM_BEGIN  (DPRAM_ATM - CFG_IMMR - 0x2000)
+#define ATM_DPRAM_BEGIN  (DPRAM_ATM - CONFIG_SYS_IMMR - 0x2000)
 #define NUM_CONNECTIONS  1
 #define SAR_RXB_SIZE     1584
 #define AM_HMASK         0x0FFFFFF0
diff --git a/board/siemens/IAD210/flash.c b/board/siemens/IAD210/flash.c
index 110858d3c..c262e0f83 100644
--- a/board/siemens/IAD210/flash.c
+++ b/board/siemens/IAD210/flash.c
@@ -24,7 +24,7 @@
 #include <common.h>
 #include <mpc8xx.h>
 
-flash_info_t	flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips	*/
+flash_info_t	flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips	*/
 
 /*-----------------------------------------------------------------------
  * Functions
@@ -38,13 +38,13 @@ static void flash_get_offsets (ulong base, flash_info_t *info);
 
 unsigned long flash_init (void)
 {
-  volatile immap_t     *immap  = (immap_t *)CFG_IMMR;
+  volatile immap_t     *immap  = (immap_t *)CONFIG_SYS_IMMR;
   volatile memctl8xx_t *memctl = &immap->im_memctl;
   unsigned long size;
   int i;
 
   /* Init: no FLASHes known */
-  for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) {
+  for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
     flash_info[i].flash_id = FLASH_UNKNOWN;
   }
 
@@ -59,13 +59,13 @@ unsigned long flash_init (void)
 
 
   /* Remap FLASH according to real size */
-  memctl->memc_or0 = CFG_OR_TIMING_FLASH | (-size & 0xFFFF8000);
-  memctl->memc_br0 = (CFG_FLASH_BASE & BR_BA_MSK) | BR_MS_GPCM | BR_V;
+  memctl->memc_or0 = CONFIG_SYS_OR_TIMING_FLASH | (-size & 0xFFFF8000);
+  memctl->memc_br0 = (CONFIG_SYS_FLASH_BASE & BR_BA_MSK) | BR_MS_GPCM | BR_V;
 
   /* Re-do sizing to get full correct info */
-  size = flash_get_size((vu_long *)CFG_FLASH_BASE, &flash_info[0]);
+  size = flash_get_size((vu_long *)CONFIG_SYS_FLASH_BASE, &flash_info[0]);
 
-  flash_get_offsets (CFG_FLASH_BASE, &flash_info[0]);
+  flash_get_offsets (CONFIG_SYS_FLASH_BASE, &flash_info[0]);
 
   flash_info[0].size = size;
 
@@ -368,7 +368,7 @@ int	flash_erase (flash_info_t *info, int s_first, int s_last)
   last  = start;
   addr = (vu_long*)(info->start[l_sect]);
   while ((addr[0] & 0x00800080) != 0x00800080) {
-    if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+    if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
       printf ("Timeout\n");
       return 1;
     }
@@ -491,7 +491,7 @@ static int write_word (flash_info_t *info, ulong dest, ulong data)
   /* data polling for D7 */
   start = get_timer (0);
   while ((*((vu_long *)dest) & 0x00800080) != (data & 0x00800080)) {
-    if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+    if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
       return (1);
     }
   }
diff --git a/board/siemens/IAD210/u-boot.lds b/board/siemens/IAD210/u-boot.lds
index 291f6b368..47677c6ee 100644
--- a/board/siemens/IAD210/u-boot.lds
+++ b/board/siemens/IAD210/u-boot.lds
@@ -61,7 +61,7 @@ SECTIONS
     cpu/mpc8xx/interrupts.o (.text)
     lib_ppc/time.o		(.text)
     . = env_offset;
-    common/environment.o(.text)
+    common/env_embedded.o(.text)
 
     *(.text)
     *(.fixup)
@@ -132,6 +132,7 @@ SECTIONS
    *(.dynbss)
    *(.bss)
    *(COMMON)
+   . = ALIGN(4);
   }
   _end = . ;
   PROVIDE (end = .);
diff --git a/board/siemens/SCM/config.mk b/board/siemens/SCM/config.mk
index 855ae38f8..5d0898be6 100644
--- a/board/siemens/SCM/config.mk
+++ b/board/siemens/SCM/config.mk
@@ -25,7 +25,7 @@
 # Siemens SCM boards
 #
 
-# This should be equal to the CFG_FLASH_BASE define in config_SCM.h
+# This should be equal to the CONFIG_SYS_FLASH_BASE define in config_SCM.h
 # for the "final" configuration, with U-Boot in flash, or the address
 # in RAM where U-Boot is loaded at for debugging.
 #
diff --git a/board/siemens/SCM/flash.c b/board/siemens/SCM/flash.c
index 056fe810b..4a6d5382b 100644
--- a/board/siemens/SCM/flash.c
+++ b/board/siemens/SCM/flash.c
@@ -31,7 +31,7 @@
 #define V_BYTE(a)	(*(volatile unsigned char *)( a ))
 
 
-flash_info_t flash_info[CFG_MAX_FLASH_BANKS];
+flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];
 
 
 /*-----------------------------------------------------------------------
@@ -185,13 +185,13 @@ unsigned long flash_init (void)
 	int i;
 
 	/* Init: no FLASHes known */
-	for (i = 0; i < CFG_MAX_FLASH_BANKS; ++i) {
+	for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
 		flash_info[i].flash_id = FLASH_UNKNOWN;
 	}
 
 	/* Static FLASH Bank configuration here (only one bank) */
 
-	size_b0 = flash_get_size (CFG_FLASH0_BASE, &flash_info[0]);
+	size_b0 = flash_get_size (CONFIG_SYS_FLASH0_BASE, &flash_info[0]);
 	if (flash_info[0].flash_id == FLASH_UNKNOWN || size_b0 == 0) {
 		printf ("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n",
 				size_b0, size_b0 >> 20);
@@ -201,19 +201,19 @@ unsigned long flash_init (void)
 	 * protect monitor and environment sectors
 	 */
 
-#if CFG_MONITOR_BASE >= CFG_FLASH0_BASE
+#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH0_BASE
 	flash_protect (FLAG_PROTECT_SET,
-		       CFG_MONITOR_BASE,
-		       CFG_MONITOR_BASE + monitor_flash_len - 1, &flash_info[0]);
+		       CONFIG_SYS_MONITOR_BASE,
+		       CONFIG_SYS_MONITOR_BASE + monitor_flash_len - 1, &flash_info[0]);
 #endif
 
-#if (CFG_ENV_IS_IN_FLASH == 1) && defined(CFG_ENV_ADDR)
-# ifndef  CFG_ENV_SIZE
-#  define CFG_ENV_SIZE	CFG_ENV_SECT_SIZE
+#if defined(CONFIG_ENV_IS_IN_FLASH) && defined(CONFIG_ENV_ADDR)
+# ifndef  CONFIG_ENV_SIZE
+#  define CONFIG_ENV_SIZE	CONFIG_ENV_SECT_SIZE
 # endif
 	flash_protect (FLAG_PROTECT_SET,
-		       CFG_ENV_ADDR,
-		       CFG_ENV_ADDR + CFG_ENV_SIZE - 1, &flash_info[0]);
+		       CONFIG_ENV_ADDR,
+		       CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1, &flash_info[0]);
 #endif
 
 	return (size_b0);
@@ -364,7 +364,7 @@ int flash_erase (flash_info_t * info, int s_first, int s_last)
 	while ((V_ULONG (info->start[l_sect]) & 0x00800080) != 0x00800080 ||
 	       (V_ULONG (info->start[l_sect] + 4) & 0x00800080) != 0x00800080)
 	{
-		if ((now = get_timer (start)) > CFG_FLASH_ERASE_TOUT) {
+		if ((now = get_timer (start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
 			printf ("Timeout\n");
 			return 1;
 		}
@@ -480,7 +480,7 @@ static int write_dword (flash_info_t * info, ulong dest, unsigned char *pdata)
 	start = get_timer (0);
 	while (((V_ULONG (dest) & 0x00800080) != (ch & 0x00800080)) ||
 		   ((V_ULONG (dest + 4) & 0x00800080) != (cl & 0x00800080))) {
-		if (get_timer (start) > CFG_FLASH_WRITE_TOUT) {
+		if (get_timer (start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
 			return (1);
 		}
 	}
diff --git a/board/siemens/SCM/fpga_scm.c b/board/siemens/SCM/fpga_scm.c
index 661bf66c6..acd9c1570 100644
--- a/board/siemens/SCM/fpga_scm.c
+++ b/board/siemens/SCM/fpga_scm.c
@@ -28,18 +28,18 @@
 #include "../common/fpga.h"
 
 fpga_t fpga_list[] = {
-	{"FIOX", CFG_FIOX_BASE,
-	 CFG_PD_FIOX_INIT, CFG_PD_FIOX_PROG, CFG_PD_FIOX_DONE}
+	{"FIOX", CONFIG_SYS_FIOX_BASE,
+	 CONFIG_SYS_PD_FIOX_INIT, CONFIG_SYS_PD_FIOX_PROG, CONFIG_SYS_PD_FIOX_DONE}
 	,
-	{"FDOHM", CFG_FDOHM_BASE,
-	 CFG_PD_FDOHM_INIT, CFG_PD_FDOHM_PROG, CFG_PD_FDOHM_DONE}
+	{"FDOHM", CONFIG_SYS_FDOHM_BASE,
+	 CONFIG_SYS_PD_FDOHM_INIT, CONFIG_SYS_PD_FDOHM_PROG, CONFIG_SYS_PD_FDOHM_DONE}
 };
 int fpga_count = sizeof (fpga_list) / sizeof (fpga_t);
 
 
 ulong fpga_control (fpga_t * fpga, int cmd)
 {
-	volatile immap_t *immr = (immap_t *) CFG_IMMR;
+	volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
 
 	switch (cmd) {
 	case FPGA_INIT_IS_HIGH:
@@ -74,11 +74,11 @@ ulong fpga_control (fpga_t * fpga, int cmd)
 		break;
 
 	case FPGA_GET_ID:
-		if (fpga->conf_base == CFG_FIOX_BASE) {
+		if (fpga->conf_base == CONFIG_SYS_FIOX_BASE) {
 			ulong ver =
 				*(volatile ulong *) (fpga->conf_base + 0x10);
 			return ((ver >> 10) & 0xf) + ((ver >> 2) & 0xf0);
-		} else if (fpga->conf_base == CFG_FDOHM_BASE) {
+		} else if (fpga->conf_base == CONFIG_SYS_FDOHM_BASE) {
 			return (*(volatile ushort *) fpga->conf_base) & 0xff;
 		} else {
 			return *(volatile ulong *) fpga->conf_base;
diff --git a/board/siemens/SCM/scm.c b/board/siemens/SCM/scm.c
index 6a9dd2583..e0611fe37 100644
--- a/board/siemens/SCM/scm.c
+++ b/board/siemens/SCM/scm.c
@@ -249,7 +249,7 @@ static long int try_init (volatile memctl8260_t * memctl, ulong sdmr,
 	 */
 	maxsize = (1 + (~orx | 0x7fff)) / 2;
 
-	/* Since CFG_SDRAM_BASE is always 0 (??), we assume that
+	/* Since CONFIG_SYS_SDRAM_BASE is always 0 (??), we assume that
 	 * we are configuring CS1 if base != 0
 	 */
 	sdmr_ptr = base ? &memctl->memc_lsdmr : &memctl->memc_psdmr;
@@ -274,7 +274,7 @@ static long int try_init (volatile memctl8260_t * memctl, ulong sdmr,
 	 *  accessing the SDRAM with a single-byte transaction."
 	 *
 	 * The appropriate BRx/ORx registers have already been set when we
-	 * get here. The SDRAM can be accessed at the address CFG_SDRAM_BASE.
+	 * get here. The SDRAM can be accessed at the address CONFIG_SYS_SDRAM_BASE.
 	 */
 
 	*sdmr_ptr = sdmr | PSDMR_OP_PREA;
@@ -285,7 +285,7 @@ static long int try_init (volatile memctl8260_t * memctl, ulong sdmr,
 		*base = c;
 
 	*sdmr_ptr = sdmr | PSDMR_OP_MRW;
-	*(base + CFG_MRS_OFFS) = c;	/* setting MR on address lines */
+	*(base + CONFIG_SYS_MRS_OFFS) = c;	/* setting MR on address lines */
 
 	*sdmr_ptr = sdmr | PSDMR_OP_NORM | PSDMR_RFEN;
 	*base = c;
@@ -308,10 +308,10 @@ int power_on_reset (void)
 
 phys_size_t initdram (int board_type)
 {
-	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
 	volatile memctl8260_t *memctl = &immap->im_memctl;
 
-#ifndef CFG_RAMBOOT
+#ifndef CONFIG_SYS_RAMBOOT
 	long size8, size9;
 #endif
 	long psize, lsize;
@@ -319,8 +319,8 @@ phys_size_t initdram (int board_type)
 	psize = 16 * 1024 * 1024;
 	lsize = 0;
 
-	memctl->memc_psrt = CFG_PSRT;
-	memctl->memc_mptpr = CFG_MPTPR;
+	memctl->memc_psrt = CONFIG_SYS_PSRT;
+	memctl->memc_mptpr = CONFIG_SYS_MPTPR;
 
 #if 0							/* Just for debugging */
 #define	prt_br_or(brX,orX) do {				\
@@ -338,37 +338,37 @@ phys_size_t initdram (int board_type)
 	prt_br_or (br3, or3);
 #endif
 
-#ifndef CFG_RAMBOOT
+#ifndef CONFIG_SYS_RAMBOOT
 	/* 60x SDRAM setup:
 	 */
-	size8 = try_init (memctl, CFG_PSDMR_8COL, CFG_OR1_8COL,
-					  (uchar *) CFG_SDRAM_BASE);
-	size9 = try_init (memctl, CFG_PSDMR_9COL, CFG_OR1_9COL,
-					  (uchar *) CFG_SDRAM_BASE);
+	size8 = try_init (memctl, CONFIG_SYS_PSDMR_8COL, CONFIG_SYS_OR1_8COL,
+					  (uchar *) CONFIG_SYS_SDRAM_BASE);
+	size9 = try_init (memctl, CONFIG_SYS_PSDMR_9COL, CONFIG_SYS_OR1_9COL,
+					  (uchar *) CONFIG_SYS_SDRAM_BASE);
 
 	if (size8 < size9) {
 		psize = size9;
 		printf ("(60x:9COL - %ld MB, ", psize >> 20);
 	} else {
-		psize = try_init (memctl, CFG_PSDMR_8COL, CFG_OR1_8COL,
-						  (uchar *) CFG_SDRAM_BASE);
+		psize = try_init (memctl, CONFIG_SYS_PSDMR_8COL, CONFIG_SYS_OR1_8COL,
+						  (uchar *) CONFIG_SYS_SDRAM_BASE);
 		printf ("(60x:8COL - %ld MB, ", psize >> 20);
 	}
 
 	/* Local SDRAM setup:
 	 */
-#ifdef CFG_INIT_LOCAL_SDRAM
-	memctl->memc_lsrt = CFG_LSRT;
-	size8 = try_init (memctl, CFG_LSDMR_8COL, CFG_OR2_8COL,
+#ifdef CONFIG_SYS_INIT_LOCAL_SDRAM
+	memctl->memc_lsrt = CONFIG_SYS_LSRT;
+	size8 = try_init (memctl, CONFIG_SYS_LSDMR_8COL, CONFIG_SYS_OR2_8COL,
 					  (uchar *) SDRAM_BASE2_PRELIM);
-	size9 = try_init (memctl, CFG_LSDMR_9COL, CFG_OR2_9COL,
+	size9 = try_init (memctl, CONFIG_SYS_LSDMR_9COL, CONFIG_SYS_OR2_9COL,
 					  (uchar *) SDRAM_BASE2_PRELIM);
 
 	if (size8 < size9) {
 		lsize = size9;
 		printf ("Local:9COL - %ld MB) using ", lsize >> 20);
 	} else {
-		lsize = try_init (memctl, CFG_LSDMR_8COL, CFG_OR2_8COL,
+		lsize = try_init (memctl, CONFIG_SYS_LSDMR_8COL, CONFIG_SYS_OR2_8COL,
 						  (uchar *) SDRAM_BASE2_PRELIM);
 		printf ("Local:8COL - %ld MB) using ", lsize >> 20);
 	}
@@ -377,11 +377,11 @@ phys_size_t initdram (int board_type)
 	/* Set up BR2 so that the local SDRAM goes
 	 * right after the 60x SDRAM
 	 */
-	memctl->memc_br2 = (CFG_BR2_PRELIM & ~BRx_BA_MSK) |
-			(CFG_SDRAM_BASE + psize);
+	memctl->memc_br2 = (CONFIG_SYS_BR2_PRELIM & ~BRx_BA_MSK) |
+			(CONFIG_SYS_SDRAM_BASE + psize);
 #endif
-#endif /* CFG_INIT_LOCAL_SDRAM */
-#endif /* CFG_RAMBOOT */
+#endif /* CONFIG_SYS_INIT_LOCAL_SDRAM */
+#endif /* CONFIG_SYS_RAMBOOT */
 
 	icache_enable ();
 
@@ -394,17 +394,17 @@ phys_size_t initdram (int board_type)
 
 static void config_scoh_cs (void)
 {
-	volatile immap_t *immr = (immap_t *) CFG_IMMR;
+	volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
 	volatile memctl8260_t *memctl = &immr->im_memctl;
-	volatile can_reg_t *can = (volatile can_reg_t *) CFG_CAN0_BASE;
+	volatile can_reg_t *can = (volatile can_reg_t *) CONFIG_SYS_CAN0_BASE;
 	volatile uint tmp, i;
 
 	/* Initialize OR3 / BR3 for CAN Bus Controller 0 */
-	memctl->memc_or3 = CFG_CAN0_OR3;
-	memctl->memc_br3 = CFG_CAN0_BR3;
+	memctl->memc_or3 = CONFIG_SYS_CAN0_OR3;
+	memctl->memc_br3 = CONFIG_SYS_CAN0_BR3;
 	/* Initialize OR4 / BR4 for CAN Bus Controller 1 */
-	memctl->memc_or4 = CFG_CAN1_OR4;
-	memctl->memc_br4 = CFG_CAN1_BR4;
+	memctl->memc_or4 = CONFIG_SYS_CAN1_OR4;
+	memctl->memc_br4 = CONFIG_SYS_CAN1_BR4;
 
 	/* Initialize MAMR to write in the array at address 0x0 */
 	memctl->memc_mamr = 0x00 | MxMR_OP_WARR | MxMR_GPL_x4DIS;
@@ -487,19 +487,19 @@ static void config_scoh_cs (void)
 
 
 	/* Initialize OR5 / BR5 for the extended EEPROM Bank0 */
-	memctl->memc_or5 = CFG_EXTPROM_OR5;
-	memctl->memc_br5 = CFG_EXTPROM_BR5;
+	memctl->memc_or5 = CONFIG_SYS_EXTPROM_OR5;
+	memctl->memc_br5 = CONFIG_SYS_EXTPROM_BR5;
 	/* Initialize OR6 / BR6 for the extended EEPROM Bank1 */
-	memctl->memc_or6 = CFG_EXTPROM_OR6;
-	memctl->memc_br6 = CFG_EXTPROM_BR6;
+	memctl->memc_or6 = CONFIG_SYS_EXTPROM_OR6;
+	memctl->memc_br6 = CONFIG_SYS_EXTPROM_BR6;
 
 	/* Initialize OR7 / BR7 for the Glue Logic */
-	memctl->memc_or7 = CFG_FIOX_OR7;
-	memctl->memc_br7 = CFG_FIOX_BR7;
+	memctl->memc_or7 = CONFIG_SYS_FIOX_OR7;
+	memctl->memc_br7 = CONFIG_SYS_FIOX_BR7;
 
 	/* Initialize OR8 / BR8 for the DOH Logic */
-	memctl->memc_or8 = CFG_FDOHM_OR8;
-	memctl->memc_br8 = CFG_FDOHM_BR8;
+	memctl->memc_or8 = CONFIG_SYS_FDOHM_OR8;
+	memctl->memc_br8 = CONFIG_SYS_FDOHM_BR8;
 
 	DEBUGF ("OR0 %08x   BR0 %08x\n", memctl->memc_or0, memctl->memc_br0);
 	DEBUGF ("OR1 %08x   BR1 %08x\n", memctl->memc_or1, memctl->memc_br1);
diff --git a/board/siemens/SMN42/flash.c b/board/siemens/SMN42/flash.c
index 7d4977e02..8cf17b857 100644
--- a/board/siemens/SMN42/flash.c
+++ b/board/siemens/SMN42/flash.c
@@ -25,8 +25,8 @@
 #include <asm/byteorder.h>
 #include <asm/arch/hardware.h>
 
-static unsigned long flash_addr_table[CFG_MAX_FLASH_BANKS] = CFG_FLASH_BANKS_LIST;
-flash_info_t flash_info[CFG_MAX_FLASH_BANKS];
+static unsigned long flash_addr_table[CONFIG_SYS_MAX_FLASH_BANKS] = CONFIG_SYS_FLASH_BANKS_LIST;
+flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];
 
 extern int lpc2292_copy_buffer_to_flash(flash_info_t *, ulong);
 extern int lpc2292_flash_erase(flash_info_t *, int, int);
@@ -70,8 +70,8 @@ ulong flash_init (void)
 		 &flash_info[0]);
 
 	flash_protect (FLAG_PROTECT_SET,
-		 CFG_ENV_ADDR,
-		 CFG_ENV_ADDR + CFG_ENV_SIZE - 1,
+		 CONFIG_ENV_ADDR,
+		 CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1,
 		 &flash_info[0]);
 
 	size += ext_flash_init();
@@ -172,19 +172,19 @@ int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
  * From here on is code for the external S29GL128N taken from cam5200_flash.c
  */
 
-#define CFG_FLASH_WORD_SIZE unsigned short
+#define CONFIG_SYS_FLASH_WORD_SIZE unsigned short
 
 static int wait_for_DQ7_32(flash_info_t * info, int sect)
 {
 	ulong start, now, last;
-	volatile CFG_FLASH_WORD_SIZE *addr =
-		(CFG_FLASH_WORD_SIZE *) (info->start[sect]);
+	volatile CONFIG_SYS_FLASH_WORD_SIZE *addr =
+		(CONFIG_SYS_FLASH_WORD_SIZE *) (info->start[sect]);
 
 	start = get_timer(0);
 	last = start;
-	while ((addr[0] & (CFG_FLASH_WORD_SIZE) 0x00800080) !=
-			(CFG_FLASH_WORD_SIZE) 0x00800080) {
-		if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+	while ((addr[0] & (CONFIG_SYS_FLASH_WORD_SIZE) 0x00800080) !=
+			(CONFIG_SYS_FLASH_WORD_SIZE) 0x00800080) {
+		if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
 			printf("Timeout\n");
 			return -1;
 		}
@@ -199,8 +199,8 @@ static int wait_for_DQ7_32(flash_info_t * info, int sect)
 
 int ext_flash_erase(flash_info_t * info, int s_first, int s_last)
 {
-	volatile CFG_FLASH_WORD_SIZE *addr = (CFG_FLASH_WORD_SIZE *) (info->start[0]);
-	volatile CFG_FLASH_WORD_SIZE *addr2;
+	volatile CONFIG_SYS_FLASH_WORD_SIZE *addr = (CONFIG_SYS_FLASH_WORD_SIZE *) (info->start[0]);
+	volatile CONFIG_SYS_FLASH_WORD_SIZE *addr2;
 	int flag, prot, sect, l_sect, ret;
 
 	ret = 0;
@@ -236,14 +236,14 @@ int ext_flash_erase(flash_info_t * info, int s_first, int s_last)
 	/* Start erase on unprotected sectors */
 	for (sect = s_first; sect <= s_last; sect++) {
 		if (info->protect[sect] == 0) {	/* not protected */
-			addr2 = (CFG_FLASH_WORD_SIZE *) (info->start[sect]);
+			addr2 = (CONFIG_SYS_FLASH_WORD_SIZE *) (info->start[sect]);
 
-			addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00AA00AA;
-			addr[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x00550055;
-			addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00800080;
-			addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00AA00AA;
-			addr[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x00550055;
-			addr2[0] = (CFG_FLASH_WORD_SIZE) 0x00300030;	/* sector erase */
+			addr[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00AA00AA;
+			addr[CONFIG_SYS_FLASH_ADDR1] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00550055;
+			addr[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00800080;
+			addr[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00AA00AA;
+			addr[CONFIG_SYS_FLASH_ADDR1] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00550055;
+			addr2[0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00300030;	/* sector erase */
 
 			l_sect = sect;
 			/*
@@ -269,8 +269,8 @@ int ext_flash_erase(flash_info_t * info, int s_first, int s_last)
 	udelay(1000);
 
 	/* reset to read mode */
-	addr = (CFG_FLASH_WORD_SIZE *) info->start[0];
-	addr[0] = (CFG_FLASH_WORD_SIZE) 0x00F000F0;	/* reset bank */
+	addr = (CONFIG_SYS_FLASH_WORD_SIZE *) info->start[0];
+	addr[0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00F000F0;	/* reset bank */
 
 	if (ret)
 		printf(" error\n");
@@ -282,20 +282,20 @@ int ext_flash_erase(flash_info_t * info, int s_first, int s_last)
 static ulong flash_get_size(vu_long * addr, flash_info_t * info)
 {
 	short i;
-	CFG_FLASH_WORD_SIZE value;
+	CONFIG_SYS_FLASH_WORD_SIZE value;
 	ulong base = (ulong) addr;
-	volatile CFG_FLASH_WORD_SIZE *addr2 = (CFG_FLASH_WORD_SIZE *) addr;
+	volatile CONFIG_SYS_FLASH_WORD_SIZE *addr2 = (CONFIG_SYS_FLASH_WORD_SIZE *) addr;
 
 	/* Write auto select command: read Manufacturer ID */
-	addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00AA00AA;
-	addr2[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x00550055;
-	addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00900090;
+	addr2[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00AA00AA;
+	addr2[CONFIG_SYS_FLASH_ADDR1] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00550055;
+	addr2[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00900090;
 	udelay(1000);
 
 	value = addr2[0];
 
 	switch (value) {
-		case (CFG_FLASH_WORD_SIZE) AMD_MANUFACT:
+		case (CONFIG_SYS_FLASH_WORD_SIZE) AMD_MANUFACT:
 			info->flash_id = FLASH_MAN_AMD;
 			break;
 		default:
@@ -308,12 +308,12 @@ static ulong flash_get_size(vu_long * addr, flash_info_t * info)
 	value = addr2[1];	/* device ID            */
 
 	switch (value) {
-		case (CFG_FLASH_WORD_SIZE)AMD_ID_MIRROR:
+		case (CONFIG_SYS_FLASH_WORD_SIZE)AMD_ID_MIRROR:
 			value = addr2[14];
 			switch(value) {
-				case (CFG_FLASH_WORD_SIZE)AMD_ID_GL128N_2:
+				case (CONFIG_SYS_FLASH_WORD_SIZE)AMD_ID_GL128N_2:
 					value = addr2[15];
-					if (value != (CFG_FLASH_WORD_SIZE)AMD_ID_GL128N_3) {
+					if (value != (CONFIG_SYS_FLASH_WORD_SIZE)AMD_ID_GL128N_3) {
 						info->flash_id = FLASH_UNKNOWN;
 					} else {
 						info->flash_id += FLASH_S29GL128N;
@@ -340,13 +340,13 @@ static ulong flash_get_size(vu_long * addr, flash_info_t * info)
 	for (i = 0; i < info->sector_count; i++) {
 		/* read sector protection at sector address, (A7 .. A0) = 0x02 */
 		/* D0 = 1 if protected */
-		addr2 = (volatile CFG_FLASH_WORD_SIZE *)(info->start[i]);
+		addr2 = (volatile CONFIG_SYS_FLASH_WORD_SIZE *)(info->start[i]);
 
 		info->protect[i] = addr2[2] & 1;
 	}
 
 	/* issue bank reset to return to read mode */
-	addr2[0] = (CFG_FLASH_WORD_SIZE) 0x00F000F0;
+	addr2[0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00F000F0;
 
 	return (info->size);
 }
@@ -354,11 +354,11 @@ static ulong flash_get_size(vu_long * addr, flash_info_t * info)
 static unsigned long ext_flash_init(void)
 {
 	unsigned long total_b = 0;
-	unsigned long size_b[CFG_MAX_FLASH_BANKS];
+	unsigned long size_b[CONFIG_SYS_MAX_FLASH_BANKS];
 	int i;
 
 	/* Init: no FLASHes known */
-	for (i = 1; i < CFG_MAX_FLASH_BANKS; ++i) {
+	for (i = 1; i < CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
 		flash_info[i].flash_id = FLASH_UNKNOWN;
 		flash_info[i].sector_count = -1;
 		flash_info[i].size = 0;
@@ -384,9 +384,9 @@ static unsigned long ext_flash_init(void)
 
 static int write_word(flash_info_t * info, ulong dest, ushort data)
 {
-	volatile CFG_FLASH_WORD_SIZE *addr2 = (CFG_FLASH_WORD_SIZE *) (info->start[0]);
-	volatile CFG_FLASH_WORD_SIZE *dest2 = (CFG_FLASH_WORD_SIZE *) dest;
-	volatile CFG_FLASH_WORD_SIZE *data2 = (CFG_FLASH_WORD_SIZE *) &data;
+	volatile CONFIG_SYS_FLASH_WORD_SIZE *addr2 = (CONFIG_SYS_FLASH_WORD_SIZE *) (info->start[0]);
+	volatile CONFIG_SYS_FLASH_WORD_SIZE *dest2 = (CONFIG_SYS_FLASH_WORD_SIZE *) dest;
+	volatile CONFIG_SYS_FLASH_WORD_SIZE *data2 = (CONFIG_SYS_FLASH_WORD_SIZE *) &data;
 	ulong start;
 	int flag;
 
@@ -398,9 +398,9 @@ static int write_word(flash_info_t * info, ulong dest, ushort data)
 	/* Disable interrupts which might cause a timeout here */
 	flag = disable_interrupts();
 
-	addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00AA00AA;
-	addr2[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x00550055;
-	addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00A000A0;
+	addr2[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00AA00AA;
+	addr2[CONFIG_SYS_FLASH_ADDR1] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00550055;
+	addr2[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00A000A0;
 	*dest2 = *data2;
 
 	/* re-enable interrupts if necessary */
@@ -409,10 +409,10 @@ static int write_word(flash_info_t * info, ulong dest, ushort data)
 
 	/* data polling for D7 */
 	start = get_timer(0);
-	while ((*dest2 & (CFG_FLASH_WORD_SIZE) 0x00800080) !=
-			(*data2 & (CFG_FLASH_WORD_SIZE) 0x00800080)) {
+	while ((*dest2 & (CONFIG_SYS_FLASH_WORD_SIZE) 0x00800080) !=
+			(*data2 & (CONFIG_SYS_FLASH_WORD_SIZE) 0x00800080)) {
 
-		if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+		if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
 			printf("WRITE_TOUT\n");
 			return (1);
 		}
diff --git a/board/siemens/SMN42/u-boot.lds b/board/siemens/SMN42/u-boot.lds
index 418101ff8..49d18f7d6 100644
--- a/board/siemens/SMN42/u-boot.lds
+++ b/board/siemens/SMN42/u-boot.lds
@@ -50,6 +50,6 @@ SECTIONS
 
 	. = ALIGN(4);
 	__bss_start = .;
-	.bss (NOLOAD) : { *(.bss) }
+	.bss (NOLOAD) : { *(.bss) . = ALIGN(4); }
 	_end = .;
 }
diff --git a/board/siemens/pcu_e/flash.c b/board/siemens/pcu_e/flash.c
index 05c364bb2..3ce7bb329 100644
--- a/board/siemens/pcu_e/flash.c
+++ b/board/siemens/pcu_e/flash.c
@@ -24,15 +24,15 @@
 #include <common.h>
 #include <mpc8xx.h>
 
-#if defined(CFG_ENV_IS_IN_FLASH)
-# ifndef  CFG_ENV_ADDR
-#  define CFG_ENV_ADDR	(CFG_FLASH_BASE + CFG_ENV_OFFSET)
+#if defined(CONFIG_ENV_IS_IN_FLASH)
+# ifndef  CONFIG_ENV_ADDR
+#  define CONFIG_ENV_ADDR	(CONFIG_SYS_FLASH_BASE + CONFIG_ENV_OFFSET)
 # endif
-# ifndef  CFG_ENV_SIZE
-#  define CFG_ENV_SIZE	CFG_ENV_SECT_SIZE
+# ifndef  CONFIG_ENV_SIZE
+#  define CONFIG_ENV_SIZE	CONFIG_ENV_SECT_SIZE
 # endif
-# ifndef  CFG_ENV_SECT_SIZE
-#  define CFG_ENV_SECT_SIZE  CFG_ENV_SIZE
+# ifndef  CONFIG_ENV_SECT_SIZE
+#  define CONFIG_ENV_SECT_SIZE  CONFIG_ENV_SIZE
 # endif
 #endif
 
@@ -47,7 +47,7 @@
 /*---------------------------------------------------------------------*/
 
 
-flash_info_t	flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips	*/
+flash_info_t	flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips	*/
 
 /*-----------------------------------------------------------------------
  * Functions
@@ -68,20 +68,20 @@ static void flash_get_offsets (ulong base, flash_info_t *info);
  */
 
 #define PCU_MONITOR_BASE   ( (flash_info[0].start[0] + flash_info[0].size - 1) \
-			   - (0xFFFFFFFF - CFG_MONITOR_BASE) )
+			   - (0xFFFFFFFF - CONFIG_SYS_MONITOR_BASE) )
 
 /*-----------------------------------------------------------------------
  */
 
 unsigned long flash_init (void)
 {
-	volatile immap_t     *immap  = (immap_t *)CFG_IMMR;
+	volatile immap_t     *immap  = (immap_t *)CONFIG_SYS_IMMR;
 	volatile memctl8xx_t *memctl = &immap->im_memctl;
 	unsigned long base, size_b0, size_b1;
 	int i;
 
 	/* Init: no FLASHes known */
-	for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) {
+	for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
 		flash_info[i].flash_id = FLASH_UNKNOWN;
 	}
 
@@ -131,7 +131,7 @@ unsigned long flash_init (void)
 
 	/* Remap FLASH according to real size */
 	base = 0 - size_b0;
-	memctl->memc_or0 = CFG_OR_TIMING_FLASH | (-size_b0 & 0xFFFF8000);
+	memctl->memc_or0 = CONFIG_SYS_OR_TIMING_FLASH | (-size_b0 & 0xFFFF8000);
 	memctl->memc_br0 = (base & BR_BA_MSK) | BR_PS_16 | BR_MS_GPCM | BR_V;
 
 	DEBUGF("## BR0: 0x%08x    OR0: 0x%08x\n",
@@ -151,18 +151,18 @@ unsigned long flash_init (void)
 		      PCU_MONITOR_BASE+monitor_flash_len-1,
 		      &flash_info[0]);
 
-#ifdef	CFG_ENV_IS_IN_FLASH
+#ifdef	CONFIG_ENV_IS_IN_FLASH
 	/* ENV protection ON by default */
 	flash_protect(FLAG_PROTECT_SET,
-		      CFG_ENV_ADDR,
-		      CFG_ENV_ADDR+CFG_ENV_SECT_SIZE-1,
+		      CONFIG_ENV_ADDR,
+		      CONFIG_ENV_ADDR+CONFIG_ENV_SECT_SIZE-1,
 		      &flash_info[0]);
 #endif
 
 	if (size_b1) {
 		flash_info_t tmp_info;
 
-		memctl->memc_or6 = CFG_OR_TIMING_FLASH | (-size_b1 & 0xFFFF8000);
+		memctl->memc_or6 = CONFIG_SYS_OR_TIMING_FLASH | (-size_b1 & 0xFFFF8000);
 		memctl->memc_br6 = ((base - size_b1) & BR_BA_MSK) |
 				    BR_PS_16 | BR_MS_GPCM | BR_V;
 
@@ -178,11 +178,11 @@ unsigned long flash_init (void)
 
 		flash_info[1].size = size_b1;
 
-#ifdef	CFG_ENV_IS_IN_FLASH
+#ifdef	CONFIG_ENV_IS_IN_FLASH
 		/* ENV protection ON by default */
 		flash_protect(FLAG_PROTECT_SET,
-			      CFG_ENV_ADDR,
-			      CFG_ENV_ADDR+CFG_ENV_SECT_SIZE-1,
+			      CONFIG_ENV_ADDR,
+			      CONFIG_ENV_ADDR+CONFIG_ENV_SECT_SIZE-1,
 			      &flash_info[1]);
 #endif
 		/*
@@ -437,10 +437,10 @@ static ulong flash_get_size (vu_long *addr, flash_info_t *info)
 #endif
 	}
 
-	if (info->sector_count > CFG_MAX_FLASH_SECT) {
+	if (info->sector_count > CONFIG_SYS_MAX_FLASH_SECT) {
 		printf ("** ERROR: sector count %d > max (%d) **\n",
-			info->sector_count, CFG_MAX_FLASH_SECT);
-		info->sector_count = CFG_MAX_FLASH_SECT;
+			info->sector_count, CONFIG_SYS_MAX_FLASH_SECT);
+		info->sector_count = CONFIG_SYS_MAX_FLASH_SECT;
 	}
 
 	saddr = (vu_short *)info->start[0];
@@ -526,7 +526,7 @@ int	flash_erase (flash_info_t *info, int s_first, int s_last)
 	last  = start;
 	addr = (vu_short*)(info->start[l_sect]);
 	while ((addr[0] & 0x0080) != 0x0080) {
-		if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+		if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
 			printf ("Timeout\n");
 			return 1;
 		}
@@ -660,7 +660,7 @@ static int write_data (flash_info_t *info, ulong dest, ulong data)
 	/* data polling for D7 */
 	start = get_timer (0);
 
-	for (passed=0; passed < CFG_FLASH_WRITE_TOUT; passed=get_timer(start)) {
+	for (passed=0; passed < CONFIG_SYS_FLASH_WRITE_TOUT; passed=get_timer(start)) {
 
 		sval = *sdest;
 
@@ -683,7 +683,7 @@ static int write_data (flash_info_t *info, ulong dest, ulong data)
 		 dest, sval, sdata);
 	}
 
-	if (passed >= CFG_FLASH_WRITE_TOUT) {
+	if (passed >= CONFIG_SYS_FLASH_WRITE_TOUT) {
 		DEBUGF ("Timeout @ addr 0x%08lX: val %04X data %04X\n",
 			dest, sval, sdata);
 		rc = 1;
diff --git a/board/siemens/pcu_e/pcu_e.c b/board/siemens/pcu_e/pcu_e.c
index 5647f7af0..a60c825b2 100644
--- a/board/siemens/pcu_e/pcu_e.c
+++ b/board/siemens/pcu_e/pcu_e.c
@@ -158,7 +158,7 @@ int checkboard (void)
 
 phys_size_t initdram (int board_type)
 {
-	volatile immap_t *immr = (immap_t *) CFG_IMMR;
+	volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
 	volatile memctl8xx_t *memctl = &immr->im_memctl;
 	long int size_b0, reg;
 	int i;
@@ -169,7 +169,7 @@ phys_size_t initdram (int board_type)
 	upmconfig (UPMA, (uint *) sdram_table,
 		   sizeof (sdram_table) / sizeof (uint));
 
-	memctl->memc_mptpr = CFG_MPTPR;
+	memctl->memc_mptpr = CONFIG_SYS_MPTPR;
 
 	/* burst length=4, burst type=sequential, CAS latency=2 */
 	memctl->memc_mar = 0x00000088;
@@ -178,15 +178,15 @@ phys_size_t initdram (int board_type)
 	 * Map controller bank 2 to the SDRAM bank at preliminary address.
 	 */
 #if PCU_E_WITH_SWAPPED_CS	/* XXX */
-	memctl->memc_or5 = CFG_OR5_PRELIM;
-	memctl->memc_br5 = CFG_BR5_PRELIM;
+	memctl->memc_or5 = CONFIG_SYS_OR5_PRELIM;
+	memctl->memc_br5 = CONFIG_SYS_BR5_PRELIM;
 #else  /* XXX */
-	memctl->memc_or2 = CFG_OR2_PRELIM;
-	memctl->memc_br2 = CFG_BR2_PRELIM;
+	memctl->memc_or2 = CONFIG_SYS_OR2_PRELIM;
+	memctl->memc_br2 = CONFIG_SYS_BR2_PRELIM;
 #endif /* XXX */
 
 	/* initialize memory address register */
-	memctl->memc_mamr = CFG_MAMR;	/* refresh not enabled yet */
+	memctl->memc_mamr = CONFIG_SYS_MAMR;	/* refresh not enabled yet */
 
 	/* mode initialization (offset 5) */
 #if PCU_E_WITH_SWAPPED_CS	/* XXX */
@@ -241,12 +241,12 @@ phys_size_t initdram (int board_type)
 	 * Check Bank 0 Memory Size for re-configuration
 	 */
 #if PCU_E_WITH_SWAPPED_CS	/* XXX */
-	size_b0 = dram_size (CFG_MAMR, (long *) SDRAM_BASE5_PRELIM, SDRAM_MAX_SIZE);
+	size_b0 = dram_size (CONFIG_SYS_MAMR, (long *) SDRAM_BASE5_PRELIM, SDRAM_MAX_SIZE);
 #else  /* XXX */
-	size_b0 = dram_size (CFG_MAMR, (long *) SDRAM_BASE2_PRELIM, SDRAM_MAX_SIZE);
+	size_b0 = dram_size (CONFIG_SYS_MAMR, (long *) SDRAM_BASE2_PRELIM, SDRAM_MAX_SIZE);
 #endif /* XXX */
 
-	memctl->memc_mamr = CFG_MAMR | MAMR_PTAE;
+	memctl->memc_mamr = CONFIG_SYS_MAMR | MAMR_PTAE;
 
 	/*
 	 * Final mapping:
@@ -254,10 +254,10 @@ phys_size_t initdram (int board_type)
 
 #if PCU_E_WITH_SWAPPED_CS	/* XXX */
 	memctl->memc_or5 = ((-size_b0) & 0xFFFF0000) | SDRAM_TIMING;
-	memctl->memc_br5 = (CFG_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V;
+	memctl->memc_br5 = (CONFIG_SYS_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V;
 #else  /* XXX */
 	memctl->memc_or2 = ((-size_b0) & 0xFFFF0000) | SDRAM_TIMING;
-	memctl->memc_br2 = (CFG_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V;
+	memctl->memc_br2 = (CONFIG_SYS_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V;
 #endif /* XXX */
 	udelay (1000);
 
@@ -283,7 +283,7 @@ phys_size_t initdram (int board_type)
 static long int dram_size (long int mamr_value, long int *base,
 			   long int maxsize)
 {
-	volatile immap_t *immr = (immap_t *) CFG_IMMR;
+	volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
 	volatile memctl8xx_t *memctl = &immr->im_memctl;
 
 	memctl->memc_mamr = mamr_value;
@@ -294,29 +294,29 @@ static long int dram_size (long int mamr_value, long int *base,
 /* ------------------------------------------------------------------------- */
 
 #if PCU_E_WITH_SWAPPED_CS	/* XXX */
-#define	ETH_CFG_BITS	(CFG_PB_ETH_CFG1 | CFG_PB_ETH_CFG2  | CFG_PB_ETH_CFG3 )
+#define	ETH_CFG_BITS	(CONFIG_SYS_PB_ETH_CFG1 | CONFIG_SYS_PB_ETH_CFG2  | CONFIG_SYS_PB_ETH_CFG3 )
 #else  /* XXX */
-#define	ETH_CFG_BITS	(CFG_PB_ETH_MDDIS | CFG_PB_ETH_CFG1 | \
-			 CFG_PB_ETH_CFG2  | CFG_PB_ETH_CFG3 )
+#define	ETH_CFG_BITS	(CONFIG_SYS_PB_ETH_MDDIS | CONFIG_SYS_PB_ETH_CFG1 | \
+			 CONFIG_SYS_PB_ETH_CFG2  | CONFIG_SYS_PB_ETH_CFG3 )
 #endif /* XXX */
 
-#define ETH_ALL_BITS	(ETH_CFG_BITS | CFG_PB_ETH_POWERDOWN | CFG_PB_ETH_RESET)
+#define ETH_ALL_BITS	(ETH_CFG_BITS | CONFIG_SYS_PB_ETH_POWERDOWN | CONFIG_SYS_PB_ETH_RESET)
 
 void reset_phy (void)
 {
-	immap_t *immr = (immap_t *) CFG_IMMR;
+	immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
 	ulong value;
 
 	/* Configure all needed port pins for GPIO */
 #if PCU_E_WITH_SWAPPED_CS	/* XXX */
-# ifdef CFG_ETH_MDDIS_VALUE
-	immr->im_ioport.iop_padat |= CFG_PA_ETH_MDDIS;
+# ifdef CONFIG_SYS_ETH_MDDIS_VALUE
+	immr->im_ioport.iop_padat |= CONFIG_SYS_PA_ETH_MDDIS;
 # else
-	immr->im_ioport.iop_padat &= ~(CFG_PA_ETH_MDDIS);	/* Set low */
+	immr->im_ioport.iop_padat &= ~(CONFIG_SYS_PA_ETH_MDDIS);	/* Set low */
 # endif
-	immr->im_ioport.iop_papar &= ~(CFG_PA_ETH_MDDIS);	/* GPIO */
-	immr->im_ioport.iop_paodr &= ~(CFG_PA_ETH_MDDIS);	/* active output */
-	immr->im_ioport.iop_padir |= CFG_PA_ETH_MDDIS;	/* output */
+	immr->im_ioport.iop_papar &= ~(CONFIG_SYS_PA_ETH_MDDIS);	/* GPIO */
+	immr->im_ioport.iop_paodr &= ~(CONFIG_SYS_PA_ETH_MDDIS);	/* active output */
+	immr->im_ioport.iop_padir |= CONFIG_SYS_PA_ETH_MDDIS;	/* output */
 #endif /* XXX */
 	immr->im_cpm.cp_pbpar &= ~(ETH_ALL_BITS);	/* GPIO */
 	immr->im_cpm.cp_pbodr &= ~(ETH_ALL_BITS);	/* active output */
@@ -324,31 +324,31 @@ void reset_phy (void)
 	value = immr->im_cpm.cp_pbdat;
 
 	/* Assert Powerdown and Reset signals */
-	value |= CFG_PB_ETH_POWERDOWN;
-	value &= ~(CFG_PB_ETH_RESET);
+	value |= CONFIG_SYS_PB_ETH_POWERDOWN;
+	value &= ~(CONFIG_SYS_PB_ETH_RESET);
 
 	/* PHY configuration includes MDDIS and CFG1 ... CFG3 */
 #if !PCU_E_WITH_SWAPPED_CS
-# ifdef CFG_ETH_MDDIS_VALUE
-	value |= CFG_PB_ETH_MDDIS;
+# ifdef CONFIG_SYS_ETH_MDDIS_VALUE
+	value |= CONFIG_SYS_PB_ETH_MDDIS;
 # else
-	value &= ~(CFG_PB_ETH_MDDIS);
+	value &= ~(CONFIG_SYS_PB_ETH_MDDIS);
 # endif
 #endif
-#ifdef CFG_ETH_CFG1_VALUE
-	value |= CFG_PB_ETH_CFG1;
+#ifdef CONFIG_SYS_ETH_CFG1_VALUE
+	value |= CONFIG_SYS_PB_ETH_CFG1;
 #else
-	value &= ~(CFG_PB_ETH_CFG1);
+	value &= ~(CONFIG_SYS_PB_ETH_CFG1);
 #endif
-#ifdef CFG_ETH_CFG2_VALUE
-	value |= CFG_PB_ETH_CFG2;
+#ifdef CONFIG_SYS_ETH_CFG2_VALUE
+	value |= CONFIG_SYS_PB_ETH_CFG2;
 #else
-	value &= ~(CFG_PB_ETH_CFG2);
+	value &= ~(CONFIG_SYS_PB_ETH_CFG2);
 #endif
-#ifdef CFG_ETH_CFG3_VALUE
-	value |= CFG_PB_ETH_CFG3;
+#ifdef CONFIG_SYS_ETH_CFG3_VALUE
+	value |= CONFIG_SYS_PB_ETH_CFG3;
 #else
-	value &= ~(CFG_PB_ETH_CFG3);
+	value &= ~(CONFIG_SYS_PB_ETH_CFG3);
 #endif
 
 	/* Drive output signals to initial state */
@@ -357,11 +357,11 @@ void reset_phy (void)
 	udelay (10000);
 
 	/* De-assert Ethernet Powerdown */
-	immr->im_cpm.cp_pbdat &= ~(CFG_PB_ETH_POWERDOWN);	/* Enable PHY power */
+	immr->im_cpm.cp_pbdat &= ~(CONFIG_SYS_PB_ETH_POWERDOWN);	/* Enable PHY power */
 	udelay (10000);
 
 	/* de-assert RESET signal of PHY */
-	immr->im_cpm.cp_pbdat |= CFG_PB_ETH_RESET;
+	immr->im_cpm.cp_pbdat |= CONFIG_SYS_PB_ETH_RESET;
 	udelay (1000);
 }
 
@@ -414,7 +414,7 @@ U_BOOT_CMD (puma, 4, 1, do_puma,
 
 static void puma_set_mode (int mode)
 {
-	volatile immap_t *immr = (immap_t *) CFG_IMMR;
+	volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
 	volatile memctl8xx_t *memctl = &immr->im_memctl;
 
 	/* disable PUMA in memory controller */
@@ -452,7 +452,7 @@ static void puma_set_mode (int mode)
 
 static void puma_load (ulong addr, ulong len)
 {
-	volatile immap_t *immr = (immap_t *) CFG_IMMR;
+	volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
 	volatile uchar *fpga_addr = (volatile uchar *) PUMA_CONF_BASE;	/* XXX ??? */
 	uchar *data = (uchar *) addr;
 	int i;
@@ -462,33 +462,33 @@ static void puma_load (ulong addr, ulong len)
 		++len;
 
 	/* Reset FPGA */
-	immr->im_ioport.iop_pcpar &= ~(CFG_PC_PUMA_INIT);	/* make input */
-	immr->im_ioport.iop_pcso  &= ~(CFG_PC_PUMA_INIT);
-	immr->im_ioport.iop_pcdir &= ~(CFG_PC_PUMA_INIT);
+	immr->im_ioport.iop_pcpar &= ~(CONFIG_SYS_PC_PUMA_INIT);	/* make input */
+	immr->im_ioport.iop_pcso  &= ~(CONFIG_SYS_PC_PUMA_INIT);
+	immr->im_ioport.iop_pcdir &= ~(CONFIG_SYS_PC_PUMA_INIT);
 
 #if PCU_E_WITH_SWAPPED_CS	/* XXX */
-	immr->im_cpm.cp_pbpar &= ~(CFG_PB_PUMA_PROG);		/* GPIO */
-	immr->im_cpm.cp_pbodr &= ~(CFG_PB_PUMA_PROG);		/* active output */
-	immr->im_cpm.cp_pbdat &= ~(CFG_PB_PUMA_PROG);		/* Set low */
-	immr->im_cpm.cp_pbdir |=   CFG_PB_PUMA_PROG;		/* output */
+	immr->im_cpm.cp_pbpar &= ~(CONFIG_SYS_PB_PUMA_PROG);		/* GPIO */
+	immr->im_cpm.cp_pbodr &= ~(CONFIG_SYS_PB_PUMA_PROG);		/* active output */
+	immr->im_cpm.cp_pbdat &= ~(CONFIG_SYS_PB_PUMA_PROG);		/* Set low */
+	immr->im_cpm.cp_pbdir |=   CONFIG_SYS_PB_PUMA_PROG;		/* output */
 #else
-	immr->im_ioport.iop_papar &= ~(CFG_PA_PUMA_PROG);	/* GPIO */
-	immr->im_ioport.iop_padat &= ~(CFG_PA_PUMA_PROG);	/* Set low */
-	immr->im_ioport.iop_paodr &= ~(CFG_PA_PUMA_PROG);	/* active output */
-	immr->im_ioport.iop_padir |=   CFG_PA_PUMA_PROG;	/* output */
+	immr->im_ioport.iop_papar &= ~(CONFIG_SYS_PA_PUMA_PROG);	/* GPIO */
+	immr->im_ioport.iop_padat &= ~(CONFIG_SYS_PA_PUMA_PROG);	/* Set low */
+	immr->im_ioport.iop_paodr &= ~(CONFIG_SYS_PA_PUMA_PROG);	/* active output */
+	immr->im_ioport.iop_padir |=   CONFIG_SYS_PA_PUMA_PROG;	/* output */
 #endif /* XXX */
 	udelay (100);
 
 #if PCU_E_WITH_SWAPPED_CS	/* XXX */
-	immr->im_cpm.cp_pbdat |= CFG_PB_PUMA_PROG;	/* release reset */
+	immr->im_cpm.cp_pbdat |= CONFIG_SYS_PB_PUMA_PROG;	/* release reset */
 #else
-	immr->im_ioport.iop_padat |= CFG_PA_PUMA_PROG;	/* release reset */
+	immr->im_ioport.iop_padat |= CONFIG_SYS_PA_PUMA_PROG;	/* release reset */
 #endif /* XXX */
 
 	/* wait until INIT indicates completion of reset */
 	for (i = 0; i < PUMA_INIT_TIMEOUT; ++i) {
 		udelay (1000);
-		if (immr->im_ioport.iop_pcdat & CFG_PC_PUMA_INIT)
+		if (immr->im_ioport.iop_pcdat & CONFIG_SYS_PC_PUMA_INIT)
 			break;
 	}
 	if (i == PUMA_INIT_TIMEOUT) {
@@ -519,14 +519,14 @@ static void puma_status (void)
 
 static int puma_init_done (void)
 {
-	volatile immap_t *immr = (immap_t *) CFG_IMMR;
+	volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
 
 	/* make sure pin is GPIO input */
-	immr->im_ioport.iop_pcpar &= ~(CFG_PC_PUMA_DONE);
-	immr->im_ioport.iop_pcso &= ~(CFG_PC_PUMA_DONE);
-	immr->im_ioport.iop_pcdir &= ~(CFG_PC_PUMA_DONE);
+	immr->im_ioport.iop_pcpar &= ~(CONFIG_SYS_PC_PUMA_DONE);
+	immr->im_ioport.iop_pcso &= ~(CONFIG_SYS_PC_PUMA_DONE);
+	immr->im_ioport.iop_pcdir &= ~(CONFIG_SYS_PC_PUMA_DONE);
 
-	return (immr->im_ioport.iop_pcdat & CFG_PC_PUMA_DONE) ? 1 : 0;
+	return (immr->im_ioport.iop_pcdat & CONFIG_SYS_PC_PUMA_DONE) ? 1 : 0;
 }
 
 /* ------------------------------------------------------------------------- */
diff --git a/board/siemens/pcu_e/u-boot.lds b/board/siemens/pcu_e/u-boot.lds
index bc1ea7372..319cc7bd0 100644
--- a/board/siemens/pcu_e/u-boot.lds
+++ b/board/siemens/pcu_e/u-boot.lds
@@ -53,7 +53,7 @@ SECTIONS
   .text      :
   {
     cpu/mpc8xx/start.o	(.text)
-    common/environment.o(.text)
+    common/env_embedded.o(.text)
     *(.text)
     *(.fixup)
     *(.got1)
@@ -123,6 +123,7 @@ SECTIONS
    *(.dynbss)
    *(.bss)
    *(COMMON)
+   . = ALIGN(4);
   }
   _end = . ;
   PROVIDE (end = .);
diff --git a/board/siemens/pcu_e/u-boot.lds.debug b/board/siemens/pcu_e/u-boot.lds.debug
index 2ee823745..bd9d76ce2 100644
--- a/board/siemens/pcu_e/u-boot.lds.debug
+++ b/board/siemens/pcu_e/u-boot.lds.debug
@@ -62,7 +62,7 @@ SECTIONS
     lib_ppc/extable.o	(.text)
 
     . = env_offset;
-    common/environment.o(.text)
+    common/env_embedded.o(.text)
 
     *(.text)
     *(.fixup)
diff --git a/board/sixnet/flash.c b/board/sixnet/flash.c
index 61d758085..a8dfca824 100644
--- a/board/sixnet/flash.c
+++ b/board/sixnet/flash.c
@@ -23,12 +23,12 @@
 
 #include <common.h>
 #include <mpc8xx.h>
-/* environment.h defines the various CFG_ENV_... values in terms
+/* environment.h defines the various CONFIG_ENV_... values in terms
  * of whichever ones are given in the configuration file.
  */
 #include <environment.h>
 
-flash_info_t	flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips	*/
+flash_info_t	flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips	*/
 
 /* NOTE - CONFIG_FLASH_16BIT means the CPU interface is 16-bit, it
  *        has nothing to do with the flash chip being 8-bit or 16-bit.
@@ -56,7 +56,7 @@ static void flash_reset(flash_info_t *info);
 static int write_word_intel(flash_info_t *info, FPWV *dest, FPW data);
 static int write_word_amd(flash_info_t *info, FPWV *dest, FPW data);
 static void flash_get_offsets(ulong base, flash_info_t *info);
-#ifdef CFG_FLASH_PROTECTION
+#ifdef CONFIG_SYS_FLASH_PROTECTION
 static void flash_sync_real_protect(flash_info_t *info);
 #endif
 
@@ -67,17 +67,17 @@ static void flash_sync_real_protect(flash_info_t *info);
  */
 unsigned long flash_init (void)
 {
-	volatile immap_t     *immap  = (immap_t *)CFG_IMMR;
+	volatile immap_t     *immap  = (immap_t *)CONFIG_SYS_IMMR;
 	volatile memctl8xx_t *memctl = &immap->im_memctl;
 	unsigned long size_b;
 	int i;
 
 	/* Init: no FLASHes known */
-	for (i=0; i < CFG_MAX_FLASH_BANKS; ++i) {
+	for (i=0; i < CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
 		flash_info[i].flash_id = FLASH_UNKNOWN;
 	}
 
-	size_b = flash_get_size((FPW *)CFG_FLASH_BASE, &flash_info[0]);
+	size_b = flash_get_size((FPW *)CONFIG_SYS_FLASH_BASE, &flash_info[0]);
 
 	flash_info[0].size = size_b;
 
@@ -91,33 +91,33 @@ unsigned long flash_init (void)
 	/* Do this again (was done already in flast_get_size), just
 	 * in case we move it when remap the FLASH.
 	 */
-	flash_get_offsets (CFG_FLASH_BASE, &flash_info[0]);
+	flash_get_offsets (CONFIG_SYS_FLASH_BASE, &flash_info[0]);
 
-#ifdef CFG_FLASH_PROTECTION
+#ifdef CONFIG_SYS_FLASH_PROTECTION
 	/* read the hardware protection status (if any) into the
 	 * protection array in flash_info.
 	 */
 	flash_sync_real_protect(&flash_info[0]);
 #endif
 
-#if CFG_MONITOR_BASE >= CFG_FLASH_BASE
+#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE
 	/* monitor protection ON by default */
 	flash_protect(FLAG_PROTECT_SET,
-		      CFG_MONITOR_BASE,
-		      CFG_MONITOR_BASE+monitor_flash_len-1,
+		      CONFIG_SYS_MONITOR_BASE,
+		      CONFIG_SYS_MONITOR_BASE+monitor_flash_len-1,
 		      &flash_info[0]);
 #endif
 
-#ifdef CFG_ENV_ADDR
+#ifdef CONFIG_ENV_ADDR
 	flash_protect ( FLAG_PROTECT_SET,
-			CFG_ENV_ADDR,
-			CFG_ENV_ADDR + CFG_ENV_SIZE - 1, &flash_info[0]);
+			CONFIG_ENV_ADDR,
+			CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1, &flash_info[0]);
 #endif
 
-#ifdef CFG_ENV_ADDR_REDUND
+#ifdef CONFIG_ENV_ADDR_REDUND
 	flash_protect ( FLAG_PROTECT_SET,
-			CFG_ENV_ADDR_REDUND,
-			CFG_ENV_ADDR_REDUND + CFG_ENV_SIZE_REDUND - 1,
+			CONFIG_ENV_ADDR_REDUND,
+			CONFIG_ENV_ADDR_REDUND + CONFIG_ENV_SIZE_REDUND - 1,
 			&flash_info[0]);
 #endif
 
@@ -405,7 +405,7 @@ ulong flash_get_size (FPWV *addr, flash_info_t *info)
 	return (info->size);
 }
 
-#ifdef CFG_FLASH_PROTECTION
+#ifdef CONFIG_SYS_FLASH_PROTECTION
 /*-----------------------------------------------------------------------
  */
 
@@ -544,7 +544,7 @@ int	flash_erase (flash_info_t *info, int s_first, int s_last)
 		udelay (1000);
 
 		while ((*addr & (FPW)0x00800080) != (FPW)0x00800080) {
-			if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+			if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
 				printf ("Timeout\n");
 
 				if (intel) {
@@ -663,7 +663,7 @@ static int write_word_amd (flash_info_t *info, FPWV *dest, FPW data)
 
     /* data polling for D7 */
     while (res == 0 && (*dest & (FPW)0x00800080) != (data & (FPW)0x00800080)) {
-	if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+	if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
 	    *dest = (FPW)0x00F000F0;	/* reset bank */
 	    res = 1;
 	}
@@ -709,7 +709,7 @@ static int write_word_intel (flash_info_t *info, FPWV *dest, FPW data)
     start = get_timer (0);
 
     while (res == 0 && (*dest & (FPW)0x00800080) != (FPW)0x00800080) {
-	if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+	if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
 	    *dest = (FPW)0x00B000B0;	/* Suspend program	*/
 	    res = 1;
 	}
@@ -724,7 +724,7 @@ static int write_word_intel (flash_info_t *info, FPWV *dest, FPW data)
     return (res);
 }
 
-#ifdef CFG_FLASH_PROTECTION
+#ifdef CONFIG_SYS_FLASH_PROTECTION
 /*-----------------------------------------------------------------------
  */
 int flash_real_protect (flash_info_t * info, long sector, int prot)
diff --git a/board/sixnet/sixnet.c b/board/sixnet/sixnet.c
index dcd34726b..3ed581ec0 100644
--- a/board/sixnet/sixnet.c
+++ b/board/sixnet/sixnet.c
@@ -35,7 +35,7 @@
 
 #if defined(CONFIG_CMD_NAND)
 #include <linux/mtd/nand_legacy.h>
-extern struct nand_chip nand_dev_desc[CFG_MAX_NAND_DEVICE];
+extern struct nand_chip nand_dev_desc[CONFIG_SYS_MAX_NAND_DEVICE];
 #endif
 
 DECLARE_GLOBAL_DATA_PTR;
@@ -133,7 +133,7 @@ const uint duart_table[] =
 #define FPGA_DONE	0x0080	/* PA8, input, high when FPGA load complete */
 #define FPGA_PROGRAM_L	0x0040	/* PA9, output, low to reset, high to start */
 #define FPGA_INIT_L	0x0020	/* PA10, input, low indicates not ready	*/
-#define fpga (*(volatile unsigned char *)(CFG_FPGA_PROG))	/* FPGA port */
+#define fpga (*(volatile unsigned char *)(CONFIG_SYS_FPGA_PROG))	/* FPGA port */
 
 int board_postclk_init (void)
 {
@@ -143,7 +143,7 @@ int board_postclk_init (void)
 # include "fpgadata.c"
 	};
 
-	volatile immap_t     *immap = (immap_t *)CFG_IMMR;
+	volatile immap_t     *immap = (immap_t *)CONFIG_SYS_IMMR;
 	volatile memctl8xx_t *memctl = &immap->im_memctl;
 #define porta (immap->im_ioport.iop_padat)
 	const unsigned char* pdata;
@@ -247,10 +247,10 @@ int board_postclk_init (void)
 /* ------------------------------------------------------------------------- */
 
 /* base address for SRAM, assume 32-bit port,  valid */
-#define NVRAM_BR_VALUE   (CFG_SRAM_BASE | BR_PS_32 | BR_V)
+#define NVRAM_BR_VALUE   (CONFIG_SYS_SRAM_BASE | BR_PS_32 | BR_V)
 
 /*  up to 64MB - will be adjusted for actual size */
-#define NVRAM_OR_PRELIM  (ORMASK(CFG_SRAM_SIZE) \
+#define NVRAM_OR_PRELIM  (ORMASK(CONFIG_SYS_SRAM_SIZE) \
 	| OR_CSNT_SAM | OR_ACS_DIV4 | OR_BI | OR_SCY_5_CLK | OR_EHTR)
 /*
  * Miscellaneous platform dependent initializations after running in RAM.
@@ -258,7 +258,7 @@ int board_postclk_init (void)
 
 int misc_init_r (void)
 {
-	volatile immap_t     *immap = (immap_t *)CFG_IMMR;
+	volatile immap_t     *immap = (immap_t *)CONFIG_SYS_IMMR;
 	volatile memctl8xx_t *memctl = &immap->im_memctl;
 	char* s;
 	char* e;
@@ -271,7 +271,7 @@ int misc_init_r (void)
 	/* Is there any SRAM? Is it 16 or 32 bits wide? */
 
 	/* First look for 32-bit SRAM */
-	bd->bi_sramsize = ram_size((ulong*)CFG_SRAM_BASE, CFG_SRAM_SIZE);
+	bd->bi_sramsize = ram_size((ulong*)CONFIG_SYS_SRAM_BASE, CONFIG_SYS_SRAM_SIZE);
 
 	if (bd->bi_sramsize == 0) {
 	    /* no 32-bit SRAM, but there could be 16-bit SRAM since
@@ -279,7 +279,7 @@ int misc_init_r (void)
 	     * Try again with a 16-bit bus.
 	     */
 	    memctl->memc_br2 |= BR_PS_16;
-	    bd->bi_sramsize = ram_size((ulong*)CFG_SRAM_BASE, CFG_SRAM_SIZE);
+	    bd->bi_sramsize = ram_size((ulong*)CONFIG_SYS_SRAM_BASE, CONFIG_SYS_SRAM_SIZE);
 	}
 
 	if (bd->bi_sramsize == 0) {
@@ -288,7 +288,7 @@ int misc_init_r (void)
 	else {
 	    /* adjust or2 for actual size of SRAM */
 	    memctl->memc_or2 |= ORMASK(bd->bi_sramsize);
-	    bd->bi_sramstart = CFG_SRAM_BASE;
+	    bd->bi_sramstart = CONFIG_SYS_SRAM_BASE;
 	    printf("SRAM:  %lu KB\n", bd->bi_sramsize >> 10);
 	}
 
@@ -330,7 +330,7 @@ int misc_init_r (void)
 #if defined(CONFIG_CMD_NAND)
 void nand_init(void)
 {
-	unsigned long totlen = nand_probe(CFG_DFLASH_BASE);
+	unsigned long totlen = nand_probe(CONFIG_SYS_DFLASH_BASE);
 
 	printf ("%4lu MB\n", totlen >> 20);
 }
@@ -498,7 +498,7 @@ const uint sdram_table[] =
 
 phys_size_t initdram(int board_type)
 {
-	volatile immap_t     *immap = (immap_t *)CFG_IMMR;
+	volatile immap_t     *immap = (immap_t *)CONFIG_SYS_IMMR;
 	volatile memctl8xx_t *memctl = &immap->im_memctl;
 	uint size_sdram = 0;
 	uint size_sdram9 = 0;
diff --git a/board/sixnet/u-boot.lds b/board/sixnet/u-boot.lds
index b91c44a57..efa42445e 100644
--- a/board/sixnet/u-boot.lds
+++ b/board/sixnet/u-boot.lds
@@ -53,7 +53,7 @@ SECTIONS
   .text      :
   {
     cpu/mpc8xx/start.o	(.text)
-    common/environment.o(.text)
+    common/env_embedded.o(.text)
     *(.text)
     *(.fixup)
     *(.got1)
@@ -123,6 +123,7 @@ SECTIONS
    *(.dynbss)
    *(.bss)
    *(COMMON)
+   . = ALIGN(4);
   }
   _end = . ;
   PROVIDE (end = .);
diff --git a/board/sl8245/flash.c b/board/sl8245/flash.c
index 553dc9822..4455b6387 100644
--- a/board/sl8245/flash.c
+++ b/board/sl8245/flash.c
@@ -25,15 +25,15 @@
 #include <mpc824x.h>
 #include <asm/processor.h>
 
-#if defined(CFG_ENV_IS_IN_FLASH)
-# ifndef  CFG_ENV_ADDR
-#  define CFG_ENV_ADDR	(CFG_FLASH_BASE + CFG_ENV_OFFSET)
+#if defined(CONFIG_ENV_IS_IN_FLASH)
+# ifndef  CONFIG_ENV_ADDR
+#  define CONFIG_ENV_ADDR	(CONFIG_SYS_FLASH_BASE + CONFIG_ENV_OFFSET)
 # endif
-# ifndef  CFG_ENV_SIZE
-#  define CFG_ENV_SIZE	CFG_ENV_SECT_SIZE
+# ifndef  CONFIG_ENV_SIZE
+#  define CONFIG_ENV_SIZE	CONFIG_ENV_SECT_SIZE
 # endif
-# ifndef  CFG_ENV_SECT_SIZE
-#  define CFG_ENV_SECT_SIZE  CFG_ENV_SIZE
+# ifndef  CONFIG_ENV_SECT_SIZE
+#  define CONFIG_ENV_SECT_SIZE  CONFIG_ENV_SIZE
 # endif
 #endif
 
@@ -43,7 +43,7 @@
 #define PARAM_SECT23_SIZE 0x8000
 #define PARAM_SECT4_SIZE 0x10000
 
-flash_info_t    flash_info[CFG_MAX_FLASH_BANKS];
+flash_info_t    flash_info[CONFIG_SYS_MAX_FLASH_BANKS];
 
 static int write_data (flash_info_t *info, ulong dest, ulong *data);
 static void write_via_fpu(vu_long *addr, ulong *data);
@@ -79,8 +79,8 @@ unsigned long flash_init (void)
 	int i, j;
 	ulong size = 0;
 
-	for (i = 0; i < CFG_MAX_FLASH_BANKS; i++) {
-		vu_long *addr = (vu_long *) (CFG_FLASH_BASE + i * FLASH_BANK_SIZE);
+	for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) {
+		vu_long *addr = (vu_long *) (CONFIG_SYS_FLASH_BASE + i * FLASH_BANK_SIZE);
 
 		write_via_fpu (&addr[0xaaa], precmd0);
 		write_via_fpu (&addr[0x554], precmd1);
@@ -108,10 +108,10 @@ unsigned long flash_init (void)
 		write_via_fpu (addr, cmdres);
 
 		flash_info[i].size = FLASH_BANK_SIZE;
-		flash_info[i].sector_count = CFG_MAX_FLASH_SECT;
-		memset (flash_info[i].protect, 0, CFG_MAX_FLASH_SECT);
+		flash_info[i].sector_count = CONFIG_SYS_MAX_FLASH_SECT;
+		memset (flash_info[i].protect, 0, CONFIG_SYS_MAX_FLASH_SECT);
 		for (j = 0; j < 32; j++) {
-			flash_info[i].start[j] = CFG_FLASH_BASE +
+			flash_info[i].start[j] = CONFIG_SYS_FLASH_BASE +
 					i * FLASH_BANK_SIZE + j * MAIN_SECT_SIZE;
 		}
 		flash_info[i].start[32] =
@@ -125,29 +125,29 @@ unsigned long flash_init (void)
 
 	/* Protect monitor and environment sectors
 	 */
-#if CFG_MONITOR_BASE >= CFG_FLASH_BASE
-#if CFG_MONITOR_BASE >= CFG_FLASH_BASE + FLASH_BANK_SIZE
+#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE
+#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE + FLASH_BANK_SIZE
 	flash_protect ( FLAG_PROTECT_SET,
-			CFG_MONITOR_BASE,
-			CFG_MONITOR_BASE + monitor_flash_len - 1,
+			CONFIG_SYS_MONITOR_BASE,
+			CONFIG_SYS_MONITOR_BASE + monitor_flash_len - 1,
 			&flash_info[1]);
 #else
 	flash_protect ( FLAG_PROTECT_SET,
-			CFG_MONITOR_BASE,
-			CFG_MONITOR_BASE + monitor_flash_len - 1,
+			CONFIG_SYS_MONITOR_BASE,
+			CONFIG_SYS_MONITOR_BASE + monitor_flash_len - 1,
 			&flash_info[0]);
 #endif
 #endif
 
-#if (CFG_ENV_IS_IN_FLASH == 1) && defined(CFG_ENV_ADDR)
-#if CFG_ENV_ADDR >= CFG_FLASH_BASE + FLASH_BANK_SIZE
+#if defined(CONFIG_ENV_IS_IN_FLASH) && defined(CONFIG_ENV_ADDR)
+#if CONFIG_ENV_ADDR >= CONFIG_SYS_FLASH_BASE + FLASH_BANK_SIZE
 	flash_protect ( FLAG_PROTECT_SET,
-			CFG_ENV_ADDR,
-			CFG_ENV_ADDR + CFG_ENV_SIZE - 1, &flash_info[1]);
+			CONFIG_ENV_ADDR,
+			CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1, &flash_info[1]);
 #else
 	flash_protect ( FLAG_PROTECT_SET,
-			CFG_ENV_ADDR,
-			CFG_ENV_ADDR + CFG_ENV_SIZE - 1, &flash_info[0]);
+			CONFIG_ENV_ADDR,
+			CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1, &flash_info[0]);
 #endif
 #endif
 
@@ -267,7 +267,7 @@ int flash_erase (flash_info_t * info, int s_first, int s_last)
 
 			while (((addr[0] & 0x00800080) != 0x00800080) ||
 				   ((addr[1] & 0x00800080) != 0x00800080)) {
-				if ((now = get_timer (start)) > CFG_FLASH_ERASE_TOUT) {
+				if ((now = get_timer (start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
 					printf ("Timeout\n");
 					write_via_fpu (addr, cmdersusp);
 					write_via_fpu (addr, cmdres);
@@ -452,7 +452,7 @@ static int write_data (flash_info_t * info, ulong dest, ulong * data)
 
 	while (((addr[0] & 0x00800080) != (data[0] & 0x00800080)) ||
 	       ((addr[1] & 0x00800080) != (data[1] & 0x00800080))) {
-		if (get_timer (start) > CFG_FLASH_WRITE_TOUT) {
+		if (get_timer (start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
 			write_via_fpu (chip, cmdres);
 			return (1);
 		}
diff --git a/board/sl8245/sl8245.c b/board/sl8245/sl8245.c
index c853755a1..e849e013d 100644
--- a/board/sl8245/sl8245.c
+++ b/board/sl8245/sl8245.c
@@ -24,6 +24,7 @@
 #include <common.h>
 #include <mpc824x.h>
 #include <pci.h>
+#include <netdev.h>
 
 int checkboard (void)
 {
@@ -36,13 +37,13 @@ int checkboard (void)
 
 phys_size_t initdram (int board_type)
 {
-#ifndef CFG_RAMBOOT
+#ifndef CONFIG_SYS_RAMBOOT
 	long size;
 	long new_bank0_end;
 	long mear1;
 	long emear1;
 
-	size = get_ram_size(CFG_SDRAM_BASE, CFG_MAX_RAM_SIZE);
+	size = get_ram_size(CONFIG_SYS_SDRAM_BASE, CONFIG_SYS_MAX_RAM_SIZE);
 
 	new_bank0_end = size - 1;
 	mear1 = mpc824x_mpc107_getreg(MEAR1);
@@ -56,7 +57,7 @@ phys_size_t initdram (int board_type)
 
 	return (size);
 #else
-	return CFG_MAX_RAM_SIZE;
+	return CONFIG_SYS_MAX_RAM_SIZE;
 #endif
 }
 
@@ -67,8 +68,6 @@ void pci_init_board(void)
 	pci_mpc824x_init(&hose);
 }
 
-extern int skge_initialize(bd_t *bis);
-
 int board_eth_init(bd_t *bis)
 {
 	int rc = 0;
@@ -78,4 +77,3 @@ int board_eth_init(bd_t *bis)
 #endif
 	return rc;
 }
-
diff --git a/board/smdk2400/flash.c b/board/smdk2400/flash.c
index fd9992d36..9eee60d0d 100644
--- a/board/smdk2400/flash.c
+++ b/board/smdk2400/flash.c
@@ -33,7 +33,7 @@
 #define FLASH_BANK_SIZE 0x1000000	/* 2 x   8 MB */
 #define MAIN_SECT_SIZE  0x40000		/* 2 x 128 kB */
 
-flash_info_t flash_info[CFG_MAX_FLASH_BANKS];
+flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];
 
 
 #define CMD_READ_ARRAY		0x00FF00FF
@@ -66,17 +66,17 @@ ulong flash_init (void)
 	int i, j;
 	ulong size = 0;
 
-	for (i = 0; i < CFG_MAX_FLASH_BANKS; i++) {
+	for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) {
 		ulong flashbase = 0;
 
 		flash_info[i].flash_id =
 			(INTEL_MANUFACT     & FLASH_VENDMASK) |
 			(INTEL_ID_28F640J3A & FLASH_TYPEMASK);
 		flash_info[i].size = FLASH_BANK_SIZE;
-		flash_info[i].sector_count = CFG_MAX_FLASH_SECT;
-		memset (flash_info[i].protect, 0, CFG_MAX_FLASH_SECT);
+		flash_info[i].sector_count = CONFIG_SYS_MAX_FLASH_SECT;
+		memset (flash_info[i].protect, 0, CONFIG_SYS_MAX_FLASH_SECT);
 		if (i == 0)
-			flashbase = CFG_FLASH_BASE;
+			flashbase = CONFIG_SYS_FLASH_BASE;
 		else
 			panic ("configured too many flash banks!\n");
 		for (j = 0; j < flash_info[i].sector_count; j++) {
@@ -92,18 +92,18 @@ ulong flash_init (void)
 	 * Protect monitor and environment sectors
 	 */
 	flash_protect ( FLAG_PROTECT_SET,
-			CFG_FLASH_BASE,
-			CFG_FLASH_BASE + monitor_flash_len - 1,
+			CONFIG_SYS_FLASH_BASE,
+			CONFIG_SYS_FLASH_BASE + monitor_flash_len - 1,
 			&flash_info[0]);
 
 	flash_protect ( FLAG_PROTECT_SET,
-			CFG_ENV_ADDR,
-			CFG_ENV_ADDR + CFG_ENV_SIZE - 1, &flash_info[0]);
+			CONFIG_ENV_ADDR,
+			CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1, &flash_info[0]);
 
-#ifdef CFG_ENV_ADDR_REDUND
+#ifdef CONFIG_ENV_ADDR_REDUND
 	flash_protect ( FLAG_PROTECT_SET,
-			CFG_ENV_ADDR_REDUND,
-			CFG_ENV_ADDR_REDUND + CFG_ENV_SIZE_REDUND - 1,
+			CONFIG_ENV_ADDR_REDUND,
+			CONFIG_ENV_ADDR_REDUND + CONFIG_ENV_SIZE_REDUND - 1,
 			&flash_info[0]);
 #endif
 
@@ -299,7 +299,7 @@ int flash_erase (flash_info_t * info, int s_first, int s_last)
 			/* wait until flash is ready */
 			do {
 				/* check timeout */
-				if (get_timer_masked () > CFG_FLASH_ERASE_TOUT) {
+				if (get_timer_masked () > CONFIG_SYS_FLASH_ERASE_TOUT) {
 					*addr = CMD_STATUS_RESET;
 					result = BIT_TIMEOUT;
 					break;
@@ -394,7 +394,7 @@ static int write_word (flash_info_t * info, ulong dest, ulong data)
 	/* wait until flash is ready */
 	do {
 		/* check timeout */
-		if (get_timer_masked () > CFG_FLASH_ERASE_TOUT) {
+		if (get_timer_masked () > CONFIG_SYS_FLASH_ERASE_TOUT) {
 			*addr = CMD_SUSPEND;
 			result = BIT_TIMEOUT;
 			break;
diff --git a/board/smdk2400/u-boot.lds b/board/smdk2400/u-boot.lds
index 14cd22800..987b07d94 100644
--- a/board/smdk2400/u-boot.lds
+++ b/board/smdk2400/u-boot.lds
@@ -52,6 +52,6 @@ SECTIONS
 
 	. = ALIGN(4);
 	__bss_start = .;
-	.bss (NOLOAD) : { *(.bss) }
+	.bss (NOLOAD) : { *(.bss) . = ALIGN(4); }
 	_end = .;
 }
diff --git a/board/smdk2410/flash.c b/board/smdk2410/flash.c
index 376930bd3..132d752e8 100644
--- a/board/smdk2410/flash.c
+++ b/board/smdk2410/flash.c
@@ -30,7 +30,7 @@ ulong myflush (void);
 #define FLASH_BANK_SIZE	PHYS_FLASH_SIZE
 #define MAIN_SECT_SIZE  0x10000	/* 64 KB */
 
-flash_info_t flash_info[CFG_MAX_FLASH_BANKS];
+flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];
 
 
 #define CMD_READ_ARRAY		0x000000F0
@@ -41,8 +41,8 @@ flash_info_t flash_info[CFG_MAX_FLASH_BANKS];
 #define CMD_PROGRAM		0x000000A0
 #define CMD_UNLOCK_BYPASS	0x00000020
 
-#define MEM_FLASH_ADDR1		(*(volatile u16 *)(CFG_FLASH_BASE + (0x00000555 << 1)))
-#define MEM_FLASH_ADDR2		(*(volatile u16 *)(CFG_FLASH_BASE + (0x000002AA << 1)))
+#define MEM_FLASH_ADDR1		(*(volatile u16 *)(CONFIG_SYS_FLASH_BASE + (0x00000555 << 1)))
+#define MEM_FLASH_ADDR2		(*(volatile u16 *)(CONFIG_SYS_FLASH_BASE + (0x000002AA << 1)))
 
 #define BIT_ERASE_DONE		0x00000080
 #define BIT_RDY_MASK		0x00000080
@@ -61,7 +61,7 @@ ulong flash_init (void)
 	int i, j;
 	ulong size = 0;
 
-	for (i = 0; i < CFG_MAX_FLASH_BANKS; i++) {
+	for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) {
 		ulong flashbase = 0;
 
 		flash_info[i].flash_id =
@@ -75,8 +75,8 @@ ulong flash_init (void)
 #error "Unknown flash configured"
 #endif
 			flash_info[i].size = FLASH_BANK_SIZE;
-		flash_info[i].sector_count = CFG_MAX_FLASH_SECT;
-		memset (flash_info[i].protect, 0, CFG_MAX_FLASH_SECT);
+		flash_info[i].sector_count = CONFIG_SYS_MAX_FLASH_SECT;
+		memset (flash_info[i].protect, 0, CONFIG_SYS_MAX_FLASH_SECT);
 		if (i == 0)
 			flashbase = PHYS_FLASH_1;
 		else
@@ -111,13 +111,13 @@ ulong flash_init (void)
 	}
 
 	flash_protect (FLAG_PROTECT_SET,
-		       CFG_FLASH_BASE,
-		       CFG_FLASH_BASE + monitor_flash_len - 1,
+		       CONFIG_SYS_FLASH_BASE,
+		       CONFIG_SYS_FLASH_BASE + monitor_flash_len - 1,
 		       &flash_info[0]);
 
 	flash_protect (FLAG_PROTECT_SET,
-		       CFG_ENV_ADDR,
-		       CFG_ENV_ADDR + CFG_ENV_SIZE - 1, &flash_info[0]);
+		       CONFIG_ENV_ADDR,
+		       CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1, &flash_info[0]);
 
 	return size;
 }
@@ -236,7 +236,7 @@ int flash_erase (flash_info_t * info, int s_first, int s_last)
 
 				/* check timeout */
 				if (get_timer_masked () >
-				    CFG_FLASH_ERASE_TOUT) {
+				    CONFIG_SYS_FLASH_ERASE_TOUT) {
 					MEM_FLASH_ADDR1 = CMD_READ_ARRAY;
 					chip = TMO;
 					break;
@@ -332,7 +332,7 @@ static int write_hword (flash_info_t * info, ulong dest, ushort data)
 		result = *addr;
 
 		/* check timeout */
-		if (get_timer_masked () > CFG_FLASH_ERASE_TOUT) {
+		if (get_timer_masked () > CONFIG_SYS_FLASH_ERASE_TOUT) {
 			chip = ERR | TMO;
 			break;
 		}
diff --git a/board/smdk2410/u-boot.lds b/board/smdk2410/u-boot.lds
index 14cd22800..987b07d94 100644
--- a/board/smdk2410/u-boot.lds
+++ b/board/smdk2410/u-boot.lds
@@ -52,6 +52,6 @@ SECTIONS
 
 	. = ALIGN(4);
 	__bss_start = .;
-	.bss (NOLOAD) : { *(.bss) }
+	.bss (NOLOAD) : { *(.bss) . = ALIGN(4); }
 	_end = .;
 }
diff --git a/board/snmc/qs850/flash.c b/board/snmc/qs850/flash.c
index d2f169b88..9e276a104 100644
--- a/board/snmc/qs850/flash.c
+++ b/board/snmc/qs850/flash.c
@@ -29,7 +29,7 @@
 #include <asm/u-boot.h>
 #include <asm/processor.h>
 
-flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
+flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */
 
 
 #define FLASH_WORD_SIZE unsigned long
@@ -57,7 +57,7 @@ unsigned long flash_init (void)
 	volatile FLASH_WORD_SIZE* flash_base;
 
 	/* Init: no FLASHes known */
-	for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) {
+	for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
 		flash_info[i].flash_id = FLASH_UNKNOWN;
 	}
 
@@ -87,13 +87,13 @@ unsigned long flash_init (void)
 	}
 
 	/* Only one bank */
-	if (CFG_MAX_FLASH_BANKS == 1) {
+	if (CONFIG_SYS_MAX_FLASH_BANKS == 1) {
 		/* Setup offsets */
 		flash_get_offsets ((ulong)flash_base, &flash_info[0]);
 
 		/* Monitor protection ON by default */
-		(void)flash_protect(FLAG_PROTECT_SET, CFG_MONITOR_BASE,
-			CFG_MONITOR_BASE+CFG_MONITOR_LEN-1, &flash_info[0]);
+		(void)flash_protect(FLAG_PROTECT_SET, CONFIG_SYS_MONITOR_BASE,
+			CONFIG_SYS_MONITOR_BASE+CONFIG_SYS_MONITOR_LEN-1, &flash_info[0]);
 		size_b1 = 0 ;
 		flash_info[0].size = size_b0;
 		return(size_b0);
@@ -125,8 +125,8 @@ unsigned long flash_init (void)
 	flash_get_offsets (base_b0, &flash_info[0]);
 
 	/* monitor protection ON by default */
-	(void)flash_protect(FLAG_PROTECT_SET, CFG_MONITOR_BASE,
-		CFG_MONITOR_BASE+CFG_MONITOR_LEN-1, &flash_info[0]);
+	(void)flash_protect(FLAG_PROTECT_SET, CONFIG_SYS_MONITOR_BASE,
+		CONFIG_SYS_MONITOR_BASE+CONFIG_SYS_MONITOR_LEN-1, &flash_info[0]);
 
 	if (size_b1) {
 		/* Re-do sizing to get full correct info */
@@ -134,11 +134,11 @@ unsigned long flash_init (void)
 		flash_get_offsets (base_b1, &flash_info[1]);
 
 		/* monitor protection ON by default */
-		(void)flash_protect(FLAG_PROTECT_SET, base_b1+size_b1-CFG_MONITOR_LEN,
+		(void)flash_protect(FLAG_PROTECT_SET, base_b1+size_b1-CONFIG_SYS_MONITOR_LEN,
 			base_b1+size_b1-1, &flash_info[1]);
 
 		/* monitor protection OFF by default (one is enough) */
-		(void)flash_protect(FLAG_PROTECT_CLEAR, base_b0+size_b0-CFG_MONITOR_LEN,
+		(void)flash_protect(FLAG_PROTECT_CLEAR, base_b0+size_b0-CONFIG_SYS_MONITOR_LEN,
 			base_b0+size_b0-1, &flash_info[0]);
 	} else {
 		flash_info[1].flash_id = FLASH_UNKNOWN;
@@ -480,7 +480,7 @@ int flash_erase (flash_info_t *info, int s_first, int s_last)
 	while ((addr[0] & (0x00800080&FLASH_ID_MASK)) !=
 			(0x00800080&FLASH_ID_MASK)  )
 	{
-		if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+		if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
 			printf ("Timeout\n");
 			return 1;
 		}
@@ -607,7 +607,7 @@ static int write_word (flash_info_t *info, ulong dest, ulong data)
 	start = get_timer(0);
 
 	while ((*((vu_long *)dest) & 0x00800080) != (data & 0x00800080)) {
-		if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+		if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
 			return (1);
 		}
 	}
diff --git a/board/snmc/qs850/qs850.c b/board/snmc/qs850/qs850.c
index 2fbe8aeb5..cc8eaad88 100644
--- a/board/snmc/qs850/qs850.c
+++ b/board/snmc/qs850/qs850.c
@@ -146,7 +146,7 @@ int checkboard (void)
 
 phys_size_t initdram (int board_type)
 {
-	volatile immap_t     *immap  = (immap_t *)CFG_IMMR;
+	volatile immap_t     *immap  = (immap_t *)CONFIG_SYS_IMMR;
 	volatile memctl8xx_t *memctl = &immap->im_memctl;
 	long int size;
 
@@ -155,17 +155,17 @@ phys_size_t initdram (int board_type)
 	/*
 	* Prescaler for refresh
 	*/
-	memctl->memc_mptpr = CFG_MPTPR;
+	memctl->memc_mptpr = CONFIG_SYS_MPTPR;
 
 	/*
 	* Map controller bank 1 to the SDRAM address
 	*/
-	memctl->memc_or1 = CFG_OR1;
-	memctl->memc_br1 = CFG_BR1;
+	memctl->memc_or1 = CONFIG_SYS_OR1;
+	memctl->memc_br1 = CONFIG_SYS_BR1;
 	udelay(1000);
 
 	/* perform SDRAM initialization sequence */
-	memctl->memc_mamr = CFG_16M_MAMR;
+	memctl->memc_mamr = CONFIG_SYS_16M_MAMR;
 	udelay(100);
 
 	/* Program the SDRAM's Mode Register */
@@ -192,7 +192,7 @@ phys_size_t initdram (int board_type)
 	/*
 	* Check for 32M SDRAM Memory Size
 	*/
-	size = dram_size(CFG_32M_MAMR|MAMR_PTAE,
+	size = dram_size(CONFIG_SYS_32M_MAMR|MAMR_PTAE,
 	(long *)SDRAM_BASE, SDRAM_32M_MAX_SIZE);
 	udelay (1000);
 
@@ -200,7 +200,7 @@ phys_size_t initdram (int board_type)
 	* Check for 16M SDRAM Memory Size
 	*/
 	if (size != SDRAM_32M_MAX_SIZE) {
-	size = dram_size(CFG_16M_MAMR|MAMR_PTAE,
+	size = dram_size(CONFIG_SYS_16M_MAMR|MAMR_PTAE,
 	(long *)SDRAM_BASE, SDRAM_16M_MAX_SIZE);
 	udelay (1000);
 	}
@@ -221,7 +221,7 @@ phys_size_t initdram (int board_type)
 
 static long int dram_size (long int mamr_value, long int *base, long int maxsize)
 {
-	volatile immap_t *immap = (immap_t *)CFG_IMMR;
+	volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR;
 	volatile memctl8xx_t *memctl = &immap->im_memctl;
 
 	memctl->memc_mamr = mamr_value;
diff --git a/board/snmc/qs850/u-boot.lds b/board/snmc/qs850/u-boot.lds
index 2410d5f2c..6fa9b8129 100644
--- a/board/snmc/qs850/u-boot.lds
+++ b/board/snmc/qs850/u-boot.lds
@@ -66,7 +66,7 @@ SECTIONS
 	lib_ppc/time.o		(.text)
 
     . = DEFINED(env_offset) ? env_offset : .;
-	common/environment.o	(.ppcenv)
+	common/env_embedded.o	(.ppcenv)
 
     *(.text)
     *(.fixup)
@@ -137,6 +137,7 @@ SECTIONS
    *(.dynbss)
    *(.bss)
    *(COMMON)
+   . = ALIGN(4);
   }
   _end = . ;
   PROVIDE (end = .);
diff --git a/board/snmc/qs860t/flash.c b/board/snmc/qs860t/flash.c
index aa2e85605..2cb8dcb9d 100644
--- a/board/snmc/qs860t/flash.c
+++ b/board/snmc/qs860t/flash.c
@@ -29,10 +29,10 @@
 #include <asm/u-boot.h>
 #include <asm/processor.h>
 
-flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
+flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */
 
 
-#ifdef CFG_FLASH_16BIT
+#ifdef CONFIG_SYS_FLASH_16BIT
 #define FLASH_WORD_SIZE	unsigned short
 #define FLASH_ID_MASK	0xFFFF
 #else
@@ -46,7 +46,7 @@ flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
 /* stolen from esteem192e/flash.c */
 ulong flash_get_size (volatile FLASH_WORD_SIZE *addr, flash_info_t *info);
 
-#ifndef CFG_FLASH_16BIT
+#ifndef CONFIG_SYS_FLASH_16BIT
 static int write_word (flash_info_t *info, ulong dest, ulong data);
 #else
 static int write_short (flash_info_t *info, ulong dest, ushort data);
@@ -65,7 +65,7 @@ unsigned long flash_init (void)
 	unsigned long base_b0, base_b1;
 
 	/* Init: no FLASHes known */
-	for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) {
+	for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
 		flash_info[i].flash_id = FLASH_UNKNOWN;
 	}
 
@@ -79,20 +79,20 @@ unsigned long flash_init (void)
 	}
 
 	/* Only one bank */
-	if (CFG_MAX_FLASH_BANKS == 1) {
+	if (CONFIG_SYS_MAX_FLASH_BANKS == 1) {
 		/* Setup offsets */
 		flash_get_offsets (FLASH_BASE1_PRELIM, &flash_info[0]);
 
 		/* Monitor protection ON by default */
 #if 0	/* sand: */
 		(void)flash_protect(FLAG_PROTECT_SET,
-			FLASH_BASE1_PRELIM-CFG_MONITOR_LEN+size_b0,
+			FLASH_BASE1_PRELIM-CONFIG_SYS_MONITOR_LEN+size_b0,
 			FLASH_BASE1_PRELIM-1+size_b0,
 			&flash_info[0]);
 #else
 		(void)flash_protect(FLAG_PROTECT_SET,
-			CFG_MONITOR_BASE,
-			CFG_MONITOR_BASE+CFG_MONITOR_LEN-1,
+			CONFIG_SYS_MONITOR_BASE,
+			CONFIG_SYS_MONITOR_BASE+CONFIG_SYS_MONITOR_LEN-1,
 			&flash_info[0]);
 #endif
 		size_b1 = 0 ;
@@ -126,13 +126,13 @@ unsigned long flash_init (void)
 		/* monitor protection ON by default */
 #if 0	/* sand: */
 		(void)flash_protect(FLAG_PROTECT_SET,
-			FLASH_BASE1_PRELIM-CFG_MONITOR_LEN+size_b0,
+			FLASH_BASE1_PRELIM-CONFIG_SYS_MONITOR_LEN+size_b0,
 			FLASH_BASE1_PRELIM-1+size_b0,
 			&flash_info[0]);
 #else
 		(void)flash_protect(FLAG_PROTECT_SET,
-			CFG_MONITOR_BASE,
-			CFG_MONITOR_BASE+CFG_MONITOR_LEN-1,
+			CONFIG_SYS_MONITOR_BASE,
+			CONFIG_SYS_MONITOR_BASE+CONFIG_SYS_MONITOR_LEN-1,
 			&flash_info[0]);
 #endif
 
@@ -144,12 +144,12 @@ unsigned long flash_init (void)
 
 			/* monitor protection ON by default */
 			(void)flash_protect(FLAG_PROTECT_SET,
-				base_b1+size_b1-CFG_MONITOR_LEN,
+				base_b1+size_b1-CONFIG_SYS_MONITOR_LEN,
 				base_b1+size_b1-1,
 				&flash_info[1]);
 			/* monitor protection OFF by default (one is enough) */
 			(void)flash_protect(FLAG_PROTECT_CLEAR,
-				base_b0+size_b0-CFG_MONITOR_LEN,
+				base_b0+size_b0-CONFIG_SYS_MONITOR_LEN,
 				base_b0+size_b0-1,
 				&flash_info[0]);
 		} else {
@@ -182,7 +182,7 @@ static void flash_get_offsets (ulong base, flash_info_t *info)
 	else if (info->flash_id & FLASH_BTYPE) {
 		if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL) {
 
-#ifndef CFG_FLASH_16BIT
+#ifndef CONFIG_SYS_FLASH_16BIT
 			/* set sector offsets for bottom boot block type */
 			info->start[0] = base + 0x00000000;
 			info->start[1] = base + 0x00004000;
@@ -234,7 +234,7 @@ static void flash_get_offsets (ulong base, flash_info_t *info)
 		i = info->sector_count - 1;
 		if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL) {
 
-#ifndef CFG_FLASH_16BIT
+#ifndef CONFIG_SYS_FLASH_16BIT
 			info->start[i--] = base + info->size - 0x00004000;
 			info->start[i--] = base + info->size - 0x00008000;
 			info->start[i--] = base + info->size - 0x0000C000;
@@ -393,7 +393,7 @@ ulong flash_get_size (volatile FLASH_WORD_SIZE *addr, flash_info_t *info)
 	/* Write auto select command: read Manufacturer ID */
 
 
-#ifndef CFG_FLASH_16BIT
+#ifndef CONFIG_SYS_FLASH_16BIT
 
 	/*
 	 * Note: if it is an AMD flash and the word at addr[0000]
@@ -650,7 +650,7 @@ int flash_erase (flash_info_t * info, int s_first, int s_last)
 	/* Disable interrupts which might cause a timeout here */
 	flag = disable_interrupts ();
 	if (info->flash_id < FLASH_AMD_COMP) {
-#ifndef CFG_FLASH_16BIT
+#ifndef CONFIG_SYS_FLASH_16BIT
 		addr[0x0555] = 0x00AA00AA;
 		addr[0x02AA] = 0x00550055;
 		addr[0x0555] = 0x00800080;
@@ -690,7 +690,7 @@ int flash_erase (flash_info_t * info, int s_first, int s_last)
 		addr = (volatile FLASH_WORD_SIZE *) (info->start[l_sect]);
 		while ((addr[0] & (0x00800080 & FLASH_ID_MASK)) !=
 		       (0x00800080 & FLASH_ID_MASK)) {
-			if ((now = get_timer (start)) > CFG_FLASH_ERASE_TOUT) {
+			if ((now = get_timer (start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
 				printf ("Timeout\n");
 				return 1;
 			}
@@ -711,7 +711,7 @@ int flash_erase (flash_info_t * info, int s_first, int s_last)
 		for (sect = s_first; sect <= s_last; sect++) {
 			if (info->protect[sect] == 0) {	/* not protected */
 				barf = 0;
-#ifndef CFG_FLASH_16BIT
+#ifndef CONFIG_SYS_FLASH_16BIT
 				addr = (vu_long *) (info->start[sect]);
 				addr[0] = 0x00200020;
 				addr[0] = 0x00D000D0;
@@ -766,7 +766,7 @@ int flash_erase (flash_info_t * info, int s_first, int s_last)
 	flash_info_t *info;
 	int i;
 
-	for (i=0, info=&flash_info[0]; i<CFG_MAX_FLASH_BANKS; ++i, ++info) {
+	for (i=0, info=&flash_info[0]; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i, ++info) {
 		if ((addr >= info->start[0]) &&
 		    (addr < (info->start[0] + info->size)) ) {
 			return (info);
@@ -843,7 +843,7 @@ int flash_erase (flash_info_t * info, int s_first, int s_last)
 
 int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
 {
-#ifndef CFG_FLASH_16BIT
+#ifndef CONFIG_SYS_FLASH_16BIT
 	ulong cp, wp, data;
 	int l;
 #else
@@ -852,7 +852,7 @@ int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
 #endif
 	int i, rc;
 
-#ifndef CFG_FLASH_16BIT
+#ifndef CONFIG_SYS_FLASH_16BIT
 
 
 	wp = (addr & ~3);	/* get lower word aligned address */
@@ -979,7 +979,7 @@ int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
  * 1 - write timeout
  * 2 - Flash not erased
  */
-#ifndef CFG_FLASH_16BIT
+#ifndef CONFIG_SYS_FLASH_16BIT
 static int write_word (flash_info_t *info, ulong dest, ulong data)
 {
 	vu_long *addr = (vu_long*)(info->start[0]);
@@ -1015,13 +1015,13 @@ static int write_word (flash_info_t *info, ulong dest, ulong data)
 
 	if(info->flash_id > FLASH_AMD_COMP) {
 		while ((*((vu_long *)dest) & 0x00800080) != (data & 0x00800080)) {
-			if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+			if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
 				return (1);
 			}
 		}
 	} else {
 		while(!(addr[0] & 0x00800080)) {	/* wait for error or finish */
-			if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+			if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
 				return (1);
 			}
 
@@ -1081,7 +1081,7 @@ static int write_short (flash_info_t *info, ulong dest, ushort data)
 	if(info->flash_id < FLASH_AMD_COMP) {
 		/* AMD stuff */
 		while ((*((vu_short *)dest) & 0x0080) != (data & 0x0080)) {
-			if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+			if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
 				return (1);
 			}
 		}
@@ -1089,7 +1089,7 @@ static int write_short (flash_info_t *info, ulong dest, ushort data)
 	} else {
 		/* intel stuff */
 		while(!(addr[0] & 0x0080)){	/* wait for error or finish */
-			if (get_timer(start) > CFG_FLASH_WRITE_TOUT) return (1);
+			if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) return (1);
 		}
 
 		if( addr[0] & 0x003A) {	/* check for error */
@@ -1103,7 +1103,7 @@ static int write_short (flash_info_t *info, ulong dest, ushort data)
 		*addr = 0x00B0;
 		*addr = 0x0070;
 		while(!(addr[0] & 0x0080)){	/* wait for error or finish */
-			if (get_timer(start) > CFG_FLASH_WRITE_TOUT) return (1);
+			if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) return (1);
 		}
 		*addr = 0x00FF;
 	}
diff --git a/board/snmc/qs860t/qs860t.c b/board/snmc/qs860t/qs860t.c
index 17c935621..b272d80d9 100644
--- a/board/snmc/qs860t/qs860t.c
+++ b/board/snmc/qs860t/qs860t.c
@@ -117,7 +117,7 @@ int checkboard (void)
 
 phys_size_t initdram (int board_type)
 {
-	volatile immap_t     *immap  = (immap_t *)CFG_IMMR;
+	volatile immap_t     *immap  = (immap_t *)CONFIG_SYS_IMMR;
 	volatile memctl8xx_t *memctl = &immap->im_memctl;
 	long int size;
 
@@ -131,12 +131,12 @@ phys_size_t initdram (int board_type)
 	/*
 	* Map controller bank 2 to the SDRAM address
 	*/
-	memctl->memc_or2 = CFG_OR2;
-	memctl->memc_br2 = CFG_BR2;
+	memctl->memc_or2 = CONFIG_SYS_OR2;
+	memctl->memc_br2 = CONFIG_SYS_BR2;
 	udelay(200);
 
 	/* perform SDRAM initialization sequence */
-	memctl->memc_mbmr = CFG_16M_MBMR;
+	memctl->memc_mbmr = CONFIG_SYS_16M_MBMR;
 	udelay(100);
 
 	memctl->memc_mar  = 0x00000088;
@@ -155,7 +155,7 @@ phys_size_t initdram (int board_type)
 	/*
 	* Check for 64M SDRAM Memory Size
 	*/
-	size = dram_size (CFG_64M_MBMR, (ulong *)SDRAM_BASE, SDRAM_64M_MAX_SIZE);
+	size = dram_size (CONFIG_SYS_64M_MBMR, (ulong *)SDRAM_BASE, SDRAM_64M_MAX_SIZE);
 	udelay (1000);
 
 	/*
@@ -163,7 +163,7 @@ phys_size_t initdram (int board_type)
 	*/
 	if (size != SDRAM_64M_MAX_SIZE) {
 #endif
-	size = dram_size (CFG_16M_MBMR, (long *)SDRAM_BASE, SDRAM_16M_MAX_SIZE);
+	size = dram_size (CONFIG_SYS_16M_MBMR, (long *)SDRAM_BASE, SDRAM_16M_MAX_SIZE);
 	udelay (1000);
 #if 0
 	}
@@ -184,31 +184,31 @@ phys_size_t initdram (int board_type)
 	/*
 	* Map the 8M Intel Flash device to chip select 1
 	*/
-	memctl->memc_or1 = CFG_OR1;
-	memctl->memc_br1 = CFG_BR1;
+	memctl->memc_or1 = CONFIG_SYS_OR1;
+	memctl->memc_br1 = CONFIG_SYS_BR1;
 
 
 	/*
 	* Map 64K NVRAM, Sipex Device, NAND Ctl Reg, and LED Ctl Reg
 	* to chip select 3
 	*/
-	memctl->memc_or3 = CFG_OR3;
-	memctl->memc_br3 = CFG_BR3;
+	memctl->memc_or3 = CONFIG_SYS_OR3;
+	memctl->memc_br3 = CONFIG_SYS_BR3;
 
 	/*
 	* Map chip selects 4, 5, 6, & 7 for external expansion connector
 	*/
-	memctl->memc_or4 = CFG_OR4;
-	memctl->memc_br4 = CFG_BR4;
+	memctl->memc_or4 = CONFIG_SYS_OR4;
+	memctl->memc_br4 = CONFIG_SYS_BR4;
 
-	memctl->memc_or5 = CFG_OR5;
-	memctl->memc_br5 = CFG_BR5;
+	memctl->memc_or5 = CONFIG_SYS_OR5;
+	memctl->memc_br5 = CONFIG_SYS_BR5;
 
-	memctl->memc_or6 = CFG_OR6;
-	memctl->memc_br6 = CFG_BR6;
+	memctl->memc_or6 = CONFIG_SYS_OR6;
+	memctl->memc_br6 = CONFIG_SYS_BR6;
 
-	memctl->memc_or7 = CFG_OR7;
-	memctl->memc_br7 = CFG_BR7;
+	memctl->memc_or7 = CONFIG_SYS_OR7;
+	memctl->memc_br7 = CONFIG_SYS_BR7;
 
 #endif
 
@@ -227,7 +227,7 @@ phys_size_t initdram (int board_type)
 
 static long int dram_size (long int mbmr_value, long int *base, long int maxsize)
 {
-	volatile immap_t *immap  = (immap_t *)CFG_IMMR;
+	volatile immap_t *immap  = (immap_t *)CONFIG_SYS_IMMR;
 	volatile memctl8xx_t *memctl = &immap->im_memctl;
 
 	memctl->memc_mbmr = mbmr_value;
diff --git a/board/snmc/qs860t/u-boot.lds b/board/snmc/qs860t/u-boot.lds
index 2410d5f2c..6fa9b8129 100644
--- a/board/snmc/qs860t/u-boot.lds
+++ b/board/snmc/qs860t/u-boot.lds
@@ -66,7 +66,7 @@ SECTIONS
 	lib_ppc/time.o		(.text)
 
     . = DEFINED(env_offset) ? env_offset : .;
-	common/environment.o	(.ppcenv)
+	common/env_embedded.o	(.ppcenv)
 
     *(.text)
     *(.fixup)
@@ -137,6 +137,7 @@ SECTIONS
    *(.dynbss)
    *(.bss)
    *(COMMON)
+   . = ALIGN(4);
   }
   _end = . ;
   PROVIDE (end = .);
diff --git a/board/socrates/ddr.c b/board/socrates/ddr.c
index bbb5ee2c4..2b62b8470 100644
--- a/board/socrates/ddr.c
+++ b/board/socrates/ddr.c
@@ -10,6 +10,7 @@
 #include <i2c.h>
 
 #include <asm/fsl_ddr_sdram.h>
+#include <asm/fsl_ddr_dimm_params.h>
 
 static void
 get_spd(ddr2_spd_eeprom_t *spd, unsigned char i2c_address)
@@ -37,7 +38,9 @@ void fsl_ddr_get_spd(ddr2_spd_eeprom_t *ctrl_dimms_spd,
 	}
 }
 
-void fsl_ddr_board_options(memctl_options_t *popts, unsigned int ctrl_num)
+void fsl_ddr_board_options(memctl_options_t *popts,
+				dimm_params_t *pdimm,
+				unsigned int ctrl_num)
 {
 	/*
 	 * Factors to consider for clock adjust:
@@ -57,7 +60,7 @@ void fsl_ddr_board_options(memctl_options_t *popts, unsigned int ctrl_num)
 	 *	- frequency
 	 *	- ddr1 vs. ddr2
 	 */
-	popts->cpo_override = 10;
+	popts->cpo_override = 0;
 
 	/*
 	 * Factors to consider for write data delay:
diff --git a/board/socrates/law.c b/board/socrates/law.c
index 35c4a900a..71cff8cf0 100644
--- a/board/socrates/law.c
+++ b/board/socrates/law.c
@@ -36,6 +36,7 @@
  * 0x0000_0000	   0x2fff_ffff	   DDR			   512M
  * 0x8000_0000	   0x9fff_ffff	   PCI1 MEM		   512M
  * 0xc000_0000	   0xc00f_ffff	   FPGA			   1M
+ * 0xc800_0000	   0xcbff_ffff	   LIME			   64M
  * 0xe000_0000	   0xe00f_ffff	   CCSR			   1M (mapped by CCSRBAR)
  * 0xe200_0000	   0xe2ff_ffff	   PCI1 IO		   16M
  * 0xfc00_0000	   0xffff_ffff	   FLASH		   64M
@@ -46,13 +47,14 @@
  */
 
 struct law_entry law_table[] = {
-	SET_LAW(CFG_DDR_SDRAM_BASE, LAW_SIZE_512M, LAW_TRGT_IF_DDR),
-	SET_LAW(CFG_PCI1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI),
-	SET_LAW(CFG_LBC_FLASH_BASE, LAW_SIZE_128M, LAW_TRGT_IF_LBC),
-	SET_LAW(CFG_PCI1_IO_PHYS, LAW_SIZE_16M, LAW_TRGT_IF_PCI),
-#if defined(CFG_FPGA_BASE)
-	SET_LAW(CFG_FPGA_BASE, LAWAR_SIZE_1M, LAW_TRGT_IF_LBC),
+	SET_LAW(CONFIG_SYS_DDR_SDRAM_BASE, LAW_SIZE_512M, LAW_TRGT_IF_DDR),
+	SET_LAW(CONFIG_SYS_PCI1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI),
+	SET_LAW(CONFIG_SYS_LBC_FLASH_BASE, LAW_SIZE_64M, LAW_TRGT_IF_LBC),
+	SET_LAW(CONFIG_SYS_PCI1_IO_PHYS, LAW_SIZE_16M, LAW_TRGT_IF_PCI),
+#if defined(CONFIG_SYS_FPGA_BASE)
+	SET_LAW(CONFIG_SYS_FPGA_BASE, LAWAR_SIZE_1M, LAW_TRGT_IF_LBC),
 #endif
+	SET_LAW(CONFIG_SYS_LIME_BASE, LAWAR_SIZE_64M, LAW_TRGT_IF_LBC),
 };
 
 int num_law_entries = ARRAY_SIZE(law_table);
diff --git a/board/socrates/nand.c b/board/socrates/nand.c
index 6ec53f872..7d76f4222 100644
--- a/board/socrates/nand.c
+++ b/board/socrates/nand.c
@@ -23,7 +23,7 @@
 
 #include <common.h>
 
-#if defined(CFG_NAND_BASE)
+#if defined(CONFIG_SYS_NAND_BASE)
 #include <nand.h>
 #include <asm/errno.h>
 #include <asm/io.h>
diff --git a/board/socrates/sdram.c b/board/socrates/sdram.c
index 12d1b8a73..029ba0298 100644
--- a/board/socrates/sdram.c
+++ b/board/socrates/sdram.c
@@ -41,7 +41,7 @@
  */
 long int sdram_setup(int casl)
 {
-	volatile ccsr_ddr_t *ddr = (void *)(CFG_MPC85xx_DDR_ADDR);
+	volatile ccsr_ddr_t *ddr = (void *)(CONFIG_SYS_MPC85xx_DDR_ADDR);
 
 	/*
 	 * Disable memory controller.
@@ -49,28 +49,28 @@ long int sdram_setup(int casl)
 	ddr->cs0_config = 0;
 	ddr->sdram_cfg = 0;
 
-	ddr->cs0_bnds = CFG_DDR_CS0_BNDS;
-	ddr->cs0_config = CFG_DDR_CS0_CONFIG;
-	ddr->timing_cfg_0 = CFG_DDR_TIMING_0;
-	ddr->timing_cfg_1 = CFG_DDR_TIMING_1;
-	ddr->timing_cfg_2 = CFG_DDR_TIMING_2;
-	ddr->sdram_mode = CFG_DDR_MODE;
-	ddr->sdram_interval = CFG_DDR_INTERVAL;
-	ddr->sdram_cfg_2 = CFG_DDR_CONFIG_2;
-	ddr->sdram_clk_cntl = CFG_DDR_CLK_CONTROL;
+	ddr->cs0_bnds = CONFIG_SYS_DDR_CS0_BNDS;
+	ddr->cs0_config = CONFIG_SYS_DDR_CS0_CONFIG;
+	ddr->timing_cfg_0 = CONFIG_SYS_DDR_TIMING_0;
+	ddr->timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1;
+	ddr->timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2;
+	ddr->sdram_mode = CONFIG_SYS_DDR_MODE;
+	ddr->sdram_interval = CONFIG_SYS_DDR_INTERVAL;
+	ddr->sdram_cfg_2 = CONFIG_SYS_DDR_CONFIG_2;
+	ddr->sdram_clk_cntl = CONFIG_SYS_DDR_CLK_CONTROL;
 
 	asm ("sync;isync;msync");
 	udelay(1000);
 
-	ddr->sdram_cfg = CFG_DDR_CONFIG;
+	ddr->sdram_cfg = CONFIG_SYS_DDR_CONFIG;
 	asm ("sync; isync; msync");
 	udelay(1000);
 
-	if (get_ram_size(0, CFG_SDRAM_SIZE<<20) == CFG_SDRAM_SIZE<<20) {
+	if (get_ram_size(0, CONFIG_SYS_SDRAM_SIZE<<20) == CONFIG_SYS_SDRAM_SIZE<<20) {
 		/*
 		 * OK, size detected -> all done
 		 */
-		return CFG_SDRAM_SIZE<<20;
+		return CONFIG_SYS_SDRAM_SIZE<<20;
 	}
 
 	return 0;				/* nothing found !		*/
@@ -90,11 +90,11 @@ phys_size_t initdram (int board_type)
 	return dram_size;
 }
 
-#if defined(CFG_DRAM_TEST)
+#if defined(CONFIG_SYS_DRAM_TEST)
 int testdram (void)
 {
-	uint *pstart = (uint *) CFG_MEMTEST_START;
-	uint *pend = (uint *) CFG_MEMTEST_END;
+	uint *pstart = (uint *) CONFIG_SYS_MEMTEST_START;
+	uint *pend = (uint *) CONFIG_SYS_MEMTEST_END;
 	uint *p;
 
 	printf ("SDRAM test phase 1:\n");
diff --git a/board/socrates/socrates.c b/board/socrates/socrates.c
index d791f1135..d83dc7d6a 100644
--- a/board/socrates/socrates.c
+++ b/board/socrates/socrates.c
@@ -36,20 +36,23 @@
 #include <libfdt.h>
 #include <fdt_support.h>
 #include <asm/io.h>
-
-#if defined(CFG_FPGA_BASE)
+#include <i2c.h>
+#include <mb862xx.h>
+#include <video_fb.h>
 #include "upm_table.h"
-#endif
+
 DECLARE_GLOBAL_DATA_PTR;
 
 extern flash_info_t flash_info[];	/* FLASH chips info */
+extern GraphicDevice mb862xx;
 
 void local_bus_init (void);
 ulong flash_get_size (ulong base, int banknum);
 
 int checkboard (void)
 {
-	volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR);
+	volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+
 	char *src;
 	int f;
 	char *s = getenv("serial#");
@@ -79,16 +82,12 @@ int checkboard (void)
 	 * Initialize local bus.
 	 */
 	local_bus_init ();
-#if defined(CFG_FPGA_BASE)
-	/* Init UPMA for FPGA access */
-	upmconfig(UPMA, (uint *)UPMTableA, sizeof(UPMTableA)/sizeof(int));
-#endif
 	return 0;
 }
 
 int misc_init_r (void)
 {
-	volatile ccsr_lbc_t *memctl = (void *)(CFG_MPC85xx_LBC_ADDR);
+	volatile ccsr_lbc_t *memctl = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR);
 
 	/*
 	 * Adjust flash start and offset to detected values
@@ -99,20 +98,20 @@ int misc_init_r (void)
 	/*
 	 * Check if boot FLASH isn't max size
 	 */
-	if (gd->bd->bi_flashsize < (0 - CFG_FLASH0)) {
-		memctl->or0 = gd->bd->bi_flashstart | (CFG_OR0_PRELIM & 0x00007fff);
-		memctl->br0 = gd->bd->bi_flashstart | (CFG_BR0_PRELIM & 0x00007fff);
+	if (gd->bd->bi_flashsize < (0 - CONFIG_SYS_FLASH0)) {
+		memctl->or0 = gd->bd->bi_flashstart | (CONFIG_SYS_OR0_PRELIM & 0x00007fff);
+		memctl->br0 = gd->bd->bi_flashstart | (CONFIG_SYS_BR0_PRELIM & 0x00007fff);
 
 		/*
 		 * Re-check to get correct base address
 		 */
-		flash_get_size(gd->bd->bi_flashstart, CFG_MAX_FLASH_BANKS - 1);
+		flash_get_size(gd->bd->bi_flashstart, CONFIG_SYS_MAX_FLASH_BANKS - 1);
 	}
 
 	/*
 	 * Check if only one FLASH bank is available
 	 */
-	if (gd->bd->bi_flashsize != CFG_MAX_FLASH_BANKS * (0 - CFG_FLASH0)) {
+	if (gd->bd->bi_flashsize != CONFIG_SYS_MAX_FLASH_BANKS * (0 - CONFIG_SYS_FLASH0)) {
 		memctl->or1 = 0;
 		memctl->br1 = 0;
 
@@ -121,24 +120,24 @@ int misc_init_r (void)
 		 */
 		flash_protect (FLAG_PROTECT_CLEAR,
 			       gd->bd->bi_flashstart, 0xffffffff,
-			       &flash_info[CFG_MAX_FLASH_BANKS - 1]);
+			       &flash_info[CONFIG_SYS_MAX_FLASH_BANKS - 1]);
 
 		/* Monitor protection ON by default */
 		flash_protect (FLAG_PROTECT_SET,
-			       CFG_MONITOR_BASE, CFG_MONITOR_BASE + monitor_flash_len - 1,
-			       &flash_info[CFG_MAX_FLASH_BANKS - 1]);
+			       CONFIG_SYS_MONITOR_BASE, CONFIG_SYS_MONITOR_BASE + monitor_flash_len - 1,
+			       &flash_info[CONFIG_SYS_MAX_FLASH_BANKS - 1]);
 
 		/* Environment protection ON by default */
 		flash_protect (FLAG_PROTECT_SET,
-			       CFG_ENV_ADDR,
-			       CFG_ENV_ADDR + CFG_ENV_SECT_SIZE - 1,
-			       &flash_info[CFG_MAX_FLASH_BANKS - 1]);
+			       CONFIG_ENV_ADDR,
+			       CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE - 1,
+			       &flash_info[CONFIG_SYS_MAX_FLASH_BANKS - 1]);
 
 		/* Redundant environment protection ON by default */
 		flash_protect (FLAG_PROTECT_SET,
-			       CFG_ENV_ADDR_REDUND,
-			       CFG_ENV_ADDR_REDUND + CFG_ENV_SIZE_REDUND - 1,
-			       &flash_info[CFG_MAX_FLASH_BANKS - 1]);
+			       CONFIG_ENV_ADDR_REDUND,
+			       CONFIG_ENV_ADDR_REDUND + CONFIG_ENV_SIZE_REDUND - 1,
+			       &flash_info[CONFIG_SYS_MAX_FLASH_BANKS - 1]);
 	}
 
 	return 0;
@@ -149,15 +148,38 @@ int misc_init_r (void)
  */
 void local_bus_init (void)
 {
+	volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR);
+	volatile ccsr_local_ecm_t *ecm = (void *)(CONFIG_SYS_MPC85xx_ECM_ADDR);
+	sys_info_t sysinfo;
+	uint clkdiv;
+	uint lbc_mhz;
+	uint lcrr = CONFIG_SYS_LBC_LCRR;
+
+	get_sys_info (&sysinfo);
+	clkdiv = lbc->lcrr & 0x0f;
+	lbc_mhz = sysinfo.freqSystemBus / 1000000 / clkdiv;
+
+	/* Disable PLL bypass for Local Bus Clock >= 66 MHz */
+	if (lbc_mhz >= 66)
+		lcrr &= ~LCRR_DBYP;	/* DLL Enabled */
+	else
+		lcrr |= LCRR_DBYP;	/* DLL Bypass */
+
+	out_be32 (&lbc->lcrr, lcrr);
+	asm ("sync;isync;msync");
+
+	out_be32 (&lbc->ltesr, 0xffffffff);	/* Clear LBC error interrupts */
+	out_be32 (&lbc->lteir, 0xffffffff);	/* Enable LBC error interrupts */
+	out_be32 (&ecm->eedr, 0xffffffff);	/* Clear ecm errors */
+	out_be32 (&ecm->eeer, 0xffffffff);	/* Enable ecm errors */
 
-	volatile ccsr_lbc_t *lbc = (void *)(CFG_MPC85xx_LBC_ADDR);
-	volatile ccsr_local_ecm_t *ecm = (void *)(CFG_MPC85xx_ECM_ADDR);
-
-	lbc->ltesr = 0xffffffff;	/* Clear LBC error interrupts */
-	lbc->lteir = 0xffffffff;	/* Enable LBC error interrupts */
-	ecm->eedr = 0xffffffff;		/* Clear ecm errors */
-	ecm->eeer = 0xffffffff;		/* Enable ecm errors */
+	/* Init UPMA for FPGA access */
+	out_be32 (&lbc->mamr, 0x44440); /* Use a customer-supplied value */
+	upmconfig (UPMA, (uint *)UPMTableA, sizeof(UPMTableA)/sizeof(int));
 
+	/* Init UPMB for Lime controller access */
+	out_be32 (&lbc->mbmr, 0x444440); /* Use a customer-supplied value */
+	upmconfig (UPMB, (uint *)UPMTableB, sizeof(UPMTableB)/sizeof(int));
 }
 
 #if defined(CONFIG_PCI)
@@ -197,9 +219,14 @@ void pci_init_board (void)
 #ifdef CONFIG_BOARD_EARLY_INIT_R
 int board_early_init_r (void)
 {
-#ifdef CONFIG_PS2MULT
-	ps2mult_early_init();
-#endif /* CONFIG_PS2MULT */
+	volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+
+	/* set and reset the GPIO pin 2 which will reset the W83782G chip */
+	out_8((unsigned char*)&gur->gpoutdr, 0x3F );
+	out_be32((unsigned int*)&gur->gpiocr, 0x200 );	/* enable GPOut */
+	udelay(200);
+	out_8( (unsigned char*)&gur->gpoutdr, 0x1F );
+
 	return (0);
 }
 #endif /* CONFIG_BOARD_EARLY_INIT_R */
@@ -208,31 +235,246 @@ int board_early_init_r (void)
 void
 ft_board_setup(void *blob, bd_t *bd)
 {
-	u32 val[4];
-	int rc;
+	u32 val[12];
+	int rc, i = 0;
 
 	ft_cpu_setup(blob, bd);
 
-	/* Fixup NOR mapping */
-	val[0] = 0;				/* chip select number */
-	val[1] = 0;				/* always 0 */
-	val[2] = gd->bd->bi_flashstart;
-	val[3] = gd->bd->bi_flashsize;
+	/* Fixup NOR FLASH mapping */
+	val[i++] = 0;				/* chip select number */
+	val[i++] = 0;				/* always 0 */
+	val[i++] = gd->bd->bi_flashstart;
+	val[i++] = gd->bd->bi_flashsize;
+
+	if (mb862xx.frameAdrs == CONFIG_SYS_LIME_BASE) {
+		/* Fixup LIME mapping */
+		val[i++] = 2;			/* chip select number */
+		val[i++] = 0;			/* always 0 */
+		val[i++] = CONFIG_SYS_LIME_BASE;
+		val[i++] = CONFIG_SYS_LIME_SIZE;
+	}
+
+	/* Fixup FPGA mapping */
+	val[i++] = 3;				/* chip select number */
+	val[i++] = 0;				/* always 0 */
+	val[i++] = CONFIG_SYS_FPGA_BASE;
+	val[i++] = CONFIG_SYS_FPGA_SIZE;
 
 	rc = fdt_find_and_setprop(blob, "/localbus", "ranges",
-				  val, sizeof(val), 1);
-	if (rc)
-		printf("Unable to update property NOR mapping, err=%s\n",
-		       fdt_strerror(rc));
-
-#if defined (CFG_FPGA_BASE)
-	memset(val, 0, sizeof(val));
-	val[0] = CFG_FPGA_BASE;
-	rc = fdt_find_and_setprop(blob, "/localbus/fpga", "virtual-reg",
-				  val, sizeof(val), 1);
+				  val, i * sizeof(u32), 1);
 	if (rc)
-		printf("Unable to update property \"fpga\", err=%s\n",
+		printf("Unable to update localbus ranges, err=%s\n",
 		       fdt_strerror(rc));
-#endif
 }
 #endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */
+
+#define CONFIG_SYS_LIME_SRST		((CONFIG_SYS_LIME_BASE) + 0x01FC002C)
+#define CONFIG_SYS_LIME_CCF		((CONFIG_SYS_LIME_BASE) + 0x01FC0038)
+#define CONFIG_SYS_LIME_MMR		((CONFIG_SYS_LIME_BASE) + 0x01FCFFFC)
+/* Lime clock frequency */
+#define CONFIG_SYS_LIME_CLK_100MHZ	0x00000
+#define CONFIG_SYS_LIME_CLK_133MHZ	0x10000
+/* SDRAM parameter */
+#define CONFIG_SYS_LIME_MMR_VALUE	0x4157BA63
+
+#define DISPLAY_WIDTH		800
+#define DISPLAY_HEIGHT		480
+#define DEFAULT_BRIGHTNESS	25
+#define BACKLIGHT_ENABLE	(1 << 31)
+
+static const gdc_regs init_regs [] =
+{
+	{0x0100, 0x00010f00},
+	{0x0020, 0x801901df},
+	{0x0024, 0x00000000},
+	{0x0028, 0x00000000},
+	{0x002c, 0x00000000},
+	{0x0110, 0x00000000},
+	{0x0114, 0x00000000},
+	{0x0118, 0x01df0320},
+	{0x0004, 0x041f0000},
+	{0x0008, 0x031f031f},
+	{0x000c, 0x017f0349},
+	{0x0010, 0x020c0000},
+	{0x0014, 0x01df01e9},
+	{0x0018, 0x00000000},
+	{0x001c, 0x01e00320},
+	{0x0100, 0x80010f00},
+	{0x0, 0x0}
+};
+
+const gdc_regs *board_get_regs (void)
+{
+	return init_regs;
+}
+
+#define CONFIG_SYS_LIME_CID		((CONFIG_SYS_LIME_BASE) + 0x01FC00F0)
+#define CONFIG_SYS_LIME_REV		((CONFIG_SYS_LIME_BASE) + 0x01FF8084)
+int lime_probe(void)
+{
+	volatile ccsr_lbc_t *memctl = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR);
+	uint cfg_br2;
+	uint cfg_or2;
+	uint reg;
+
+	cfg_br2 = memctl->br2;
+	cfg_or2 = memctl->or2;
+
+	/* Configure GPCM for CS2 */
+	memctl->br2 = 0;
+	memctl->or2 = 0xfc000410;
+	memctl->br2 = (CONFIG_SYS_LIME_BASE) | 0x00001901;
+
+	/* Try to access GDC ID/Revision registers */
+	reg = in_be32((void *)CONFIG_SYS_LIME_CID);
+	reg = in_be32((void *)CONFIG_SYS_LIME_CID);
+	if (reg == 0x303) {
+		reg = in_be32((void *)CONFIG_SYS_LIME_REV);
+		reg = in_be32((void *)CONFIG_SYS_LIME_REV);
+		reg = ((reg & ~0xff) == 0x20050100) ? 1 : 0;
+	} else
+		reg = 0;
+
+	/* Restore previous CS2 configuration */
+	memctl->br2 = 0;
+	memctl->or2 = cfg_or2;
+	memctl->br2 = cfg_br2;
+	return reg;
+}
+
+/* Returns Lime base address */
+unsigned int board_video_init (void)
+{
+	if (!lime_probe())
+		return 0;
+
+	/*
+	 * Reset Lime controller
+	 */
+	out_be32((void *)CONFIG_SYS_LIME_SRST, 0x1);
+	udelay(200);
+
+	/* Set Lime clock to 133MHz */
+	out_be32((void *)CONFIG_SYS_LIME_CCF, CONFIG_SYS_LIME_CLK_133MHZ);
+	/* Delay required */
+	udelay(300);
+	/* Set memory parameters */
+	out_be32((void *)CONFIG_SYS_LIME_MMR, CONFIG_SYS_LIME_MMR_VALUE);
+
+	mb862xx.winSizeX = DISPLAY_WIDTH;
+	mb862xx.winSizeY = DISPLAY_HEIGHT;
+	mb862xx.gdfIndex = GDF_15BIT_555RGB;
+	mb862xx.gdfBytesPP = 2;
+
+	return CONFIG_SYS_LIME_BASE;
+}
+
+#define W83782D_REG_CFG		0x40
+#define W83782D_REG_BANK_SEL	0x4e
+#define W83782D_REG_ADCCLK	0x4b
+#define W83782D_REG_BEEP_CTRL	0x4d
+#define W83782D_REG_BEEP_CTRL2	0x57
+#define W83782D_REG_PWMOUT1	0x5b
+#define W83782D_REG_VBAT	0x5d
+
+static int w83782d_hwmon_init(void)
+{
+	u8 buf;
+
+	if (i2c_read(CONFIG_SYS_I2C_W83782G_ADDR, W83782D_REG_CFG, 1, &buf, 1))
+		return -1;
+
+	i2c_reg_write(CONFIG_SYS_I2C_W83782G_ADDR, W83782D_REG_CFG, 0x80);
+	i2c_reg_write(CONFIG_SYS_I2C_W83782G_ADDR, W83782D_REG_BANK_SEL, 0);
+	i2c_reg_write(CONFIG_SYS_I2C_W83782G_ADDR, W83782D_REG_ADCCLK, 0x40);
+
+	buf = i2c_reg_read(CONFIG_SYS_I2C_W83782G_ADDR, W83782D_REG_BEEP_CTRL);
+	i2c_reg_write(CONFIG_SYS_I2C_W83782G_ADDR, W83782D_REG_BEEP_CTRL,
+		      buf | 0x80);
+	i2c_reg_write(CONFIG_SYS_I2C_W83782G_ADDR, W83782D_REG_BEEP_CTRL2, 0);
+	i2c_reg_write(CONFIG_SYS_I2C_W83782G_ADDR, W83782D_REG_PWMOUT1, 0x47);
+	i2c_reg_write(CONFIG_SYS_I2C_W83782G_ADDR, W83782D_REG_VBAT, 0x01);
+
+	buf = i2c_reg_read(CONFIG_SYS_I2C_W83782G_ADDR, W83782D_REG_CFG);
+	i2c_reg_write(CONFIG_SYS_I2C_W83782G_ADDR, W83782D_REG_CFG,
+		      (buf & 0xf4) | 0x01);
+	return 0;
+}
+
+static void board_backlight_brightness(int br)
+{
+	u32 reg;
+	u8 buf;
+	u8 old_buf;
+
+	/* Select bank 0 */
+	if (i2c_read(CONFIG_SYS_I2C_W83782G_ADDR, 0x4e, 1, &old_buf, 1))
+		goto err;
+	else
+		buf = old_buf & 0xf8;
+
+	if (i2c_write(CONFIG_SYS_I2C_W83782G_ADDR, 0x4e, 1, &buf, 1))
+		goto err;
+
+	if (br > 0) {
+		/* PWMOUT1 duty cycle ctrl */
+		buf = 255 / (100 / br);
+		if (i2c_write(CONFIG_SYS_I2C_W83782G_ADDR, 0x5b, 1, &buf, 1))
+			goto err;
+
+		/* LEDs on */
+		reg = in_be32((void *)(CONFIG_SYS_FPGA_BASE + 0x0c));
+		if (!(reg & BACKLIGHT_ENABLE));
+			out_be32((void *)(CONFIG_SYS_FPGA_BASE + 0x0c),
+				 reg | BACKLIGHT_ENABLE);
+	} else {
+		buf = 0;
+		if (i2c_write(CONFIG_SYS_I2C_W83782G_ADDR, 0x5b, 1, &buf, 1))
+			goto err;
+
+		/* LEDs off */
+		reg = in_be32((void *)(CONFIG_SYS_FPGA_BASE + 0x0c));
+		reg &= ~BACKLIGHT_ENABLE;
+		out_be32((void *)(CONFIG_SYS_FPGA_BASE + 0x0c), reg);
+	}
+	/* Restore previous bank setting */
+	if (i2c_write(CONFIG_SYS_I2C_W83782G_ADDR, 0x4e, 1, &old_buf, 1))
+		goto err;
+
+	return;
+err:
+	printf("W83782G I2C access failed\n");
+}
+
+void board_backlight_switch (int flag)
+{
+	char * param;
+	int rc;
+
+	if (w83782d_hwmon_init())
+		printf ("hwmon IC init failed\n");
+
+	if (flag) {
+		param = getenv("brightness");
+		rc = param ? simple_strtol(param, NULL, 10) : -1;
+		if (rc < 0)
+			rc = DEFAULT_BRIGHTNESS;
+	} else {
+		rc = 0;
+	}
+	board_backlight_brightness(rc);
+}
+
+#if defined(CONFIG_CONSOLE_EXTRA_INFO)
+/*
+ * Return text to be printed besides the logo.
+ */
+void video_get_info_str (int line_number, char *info)
+{
+	if (line_number == 1) {
+		strcpy (info, " Board: Socrates");
+	} else {
+		info [0] = '\0';
+	}
+}
+#endif
diff --git a/board/socrates/tlb.c b/board/socrates/tlb.c
index aea99ada2..4591e466b 100644
--- a/board/socrates/tlb.c
+++ b/board/socrates/tlb.c
@@ -31,26 +31,26 @@
 
 struct fsl_e_tlb_entry tlb_table[] = {
 	/* TLB 0 - for temp stack in cache */
-	SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR, CFG_INIT_RAM_ADDR,
+	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR, CONFIG_SYS_INIT_RAM_ADDR,
 		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
 		      0, 0, BOOKE_PAGESZ_4K, 0),
-	SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR + 4 * 1024 , CFG_INIT_RAM_ADDR + 4 * 1024,
+	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024 , CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024,
 		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
 		      0, 0, BOOKE_PAGESZ_4K, 0),
-	SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR + 8 * 1024 , CFG_INIT_RAM_ADDR + 8 * 1024,
+	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024 , CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024,
 		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
 		      0, 0, BOOKE_PAGESZ_4K, 0),
-	SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR + 12 * 1024 , CFG_INIT_RAM_ADDR + 12 * 1024,
+	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024 , CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024,
 		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
 		      0, 0, BOOKE_PAGESZ_4K, 0),
 
 
 	/*
-	 * TLB 0:	64M	Non-cacheable, guarded
+	 * TLB 1:	64M	Non-cacheable, guarded
 	 * 0xfc000000	64M	FLASH
 	 * Out of reset this entry is only 4K.
 	 */
-	SET_TLB_ENTRY(1, CFG_FLASH_BASE, CFG_FLASH_BASE,
+	SET_TLB_ENTRY(1, CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE,
 		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 		      0, 1, BOOKE_PAGESZ_64M, 1),
 
@@ -58,7 +58,7 @@ struct fsl_e_tlb_entry tlb_table[] = {
 	 * TLB 2:	256M	Non-cacheable, guarded
 	 * 0x80000000	256M	PCI1 MEM First half
 	 */
-	SET_TLB_ENTRY(1, CFG_PCI1_MEM_PHYS, CFG_PCI1_MEM_PHYS,
+	SET_TLB_ENTRY(1, CONFIG_SYS_PCI1_MEM_PHYS, CONFIG_SYS_PCI1_MEM_PHYS,
 		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 		      0, 2, BOOKE_PAGESZ_256M, 1),
 
@@ -66,29 +66,41 @@ struct fsl_e_tlb_entry tlb_table[] = {
 	 * TLB 3:	256M	Non-cacheable, guarded
 	 * 0x90000000	256M	PCI1 MEM Second half
 	 */
-	SET_TLB_ENTRY(1, CFG_PCI1_MEM_PHYS + 0x10000000, CFG_PCI1_MEM_PHYS + 0x10000000,
+	SET_TLB_ENTRY(1, CONFIG_SYS_PCI1_MEM_PHYS + 0x10000000, CONFIG_SYS_PCI1_MEM_PHYS + 0x10000000,
 		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 		      0, 3, BOOKE_PAGESZ_256M, 1),
 
-#if defined(CFG_FPGA_BASE)
+#if defined(CONFIG_SYS_FPGA_BASE)
 	/*
 	 * TLB 4:	1M	Non-cacheable, guarded
 	 * 0xc0000000	1M	FPGA and NAND
 	 */
-	SET_TLB_ENTRY(1, CFG_FPGA_BASE, CFG_FPGA_BASE,
+	SET_TLB_ENTRY(1, CONFIG_SYS_FPGA_BASE, CONFIG_SYS_FPGA_BASE,
 		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 		      0, 4, BOOKE_PAGESZ_1M, 1),
 #endif
 
 	/*
+	 * TLB 5:	64M	Non-cacheable, guarded
+	 * 0xc8000000	16M	LIME GDC framebuffer
+	 * 0xc9fc0000	256K	LIME GDC MMIO
+	 * (0xcbfc0000	256K	LIME GDC MMIO)
+	 * MMIO is relocatable and could be at 0xcbfc0000
+	 */
+	SET_TLB_ENTRY(1, CONFIG_SYS_LIME_BASE, CONFIG_SYS_LIME_BASE,
+		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+		      0, 5, BOOKE_PAGESZ_64M, 1),
+
+	/*
 	 * TLB 6:	64M	Non-cacheable, guarded
 	 * 0xe000_0000	1M	CCSRBAR
 	 * 0xe200_0000	16M	PCI1 IO
 	 */
-	SET_TLB_ENTRY(1, CFG_CCSRBAR, CFG_CCSRBAR_PHYS,
+	SET_TLB_ENTRY(1, CONFIG_SYS_CCSRBAR, CONFIG_SYS_CCSRBAR_PHYS,
 		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 		      0, 6, BOOKE_PAGESZ_64M, 1),
 
+#if !defined(CONFIG_SPD_EEPROM)
 	/*
 	 * TLB 7+8:	512M	DDR, cache disabled (needed for memory test)
 	 * 0x00000000  512M	DDR System memory
@@ -96,13 +108,14 @@ struct fsl_e_tlb_entry tlb_table[] = {
 	 * Make sure the TLB count at the top of this table is correct.
 	 * Likely it needs to be increased by two for these entries.
 	 */
-	SET_TLB_ENTRY(1, CFG_DDR_SDRAM_BASE, CFG_DDR_SDRAM_BASE,
+	SET_TLB_ENTRY(1, CONFIG_SYS_DDR_SDRAM_BASE, CONFIG_SYS_DDR_SDRAM_BASE,
 		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 		      0, 7, BOOKE_PAGESZ_256M, 1),
 
-	SET_TLB_ENTRY(1, CFG_DDR_SDRAM_BASE + 0x10000000, CFG_DDR_SDRAM_BASE + 0x10000000,
+	SET_TLB_ENTRY(1, CONFIG_SYS_DDR_SDRAM_BASE + 0x10000000, CONFIG_SYS_DDR_SDRAM_BASE + 0x10000000,
 		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 		      0, 8, BOOKE_PAGESZ_256M, 1),
+#endif
 };
 
 int num_tlb_entries = ARRAY_SIZE(tlb_table);
diff --git a/board/socrates/u-boot.lds b/board/socrates/u-boot.lds
index 8d2f65ccc..499f531eb 100644
--- a/board/socrates/u-boot.lds
+++ b/board/socrates/u-boot.lds
@@ -144,6 +144,7 @@ SECTIONS
    *(.dynbss)
    *(.bss)
    *(COMMON)
+   . = ALIGN(4);
   }
   _end = . ;
   PROVIDE (end = .);
diff --git a/board/socrates/upm_table.h b/board/socrates/upm_table.h
index ea64a59a0..2a89c963e 100644
--- a/board/socrates/upm_table.h
+++ b/board/socrates/upm_table.h
@@ -34,22 +34,42 @@
 /* UPM Table Configuration Code for FPGA access */
 static const unsigned int UPMTableA[] =
 {
-	0x00fcfc00,  0x00fcfc00,  0x00fcfc00,  0x00fcfc00, /* Words  0 to  3 */
-	0x00fcfc00,  0x00fcfc00,  0x00fcfc00,  0x00fcfc05, /* Words  4 to  7 */
-	0x00fcfc00,  0x00fcfc00,  0x00fcfc04,  0x00fcfc04, /* Words  8 to 11 */
-	0x00fcfc04,  0x00fcfc04,  0x00fcfc04,  0x00fcfc04, /* Words 12 to 15 */
-	0x00fcfc04,  0x00fcfc04,  0x00fcfc00,  0xfffffc00, /* Words 16 to 19 */
-	0xfffffc00,  0xfffffc00,  0xfffffc00,  0xfffffc01, /* Words 20 to 23 */
-	0x0ffffc00,  0x0ffffc00,  0x0ffffc00,  0x00f3fc04, /* Words 24 to 27 */
-	0x0ffffc00,  0xfffffc01,  0xfffffc00,  0xfffffc01, /* Words 28 to 31 */
-	0x0ffffc00,  0x00f3fc04,  0x00f3fc04,  0x00f3fc04, /* Words 32 to 35 */
-	0x00f3fc04,  0x00f3fc04,  0x00f3fc04,  0x00f3fc04, /* Words 36 to 39 */
-	0x00f3fc04,  0x0ffffc00,  0xfffffc00,  0xfffffc00, /* Words 40 to 43 */
-	0xfffffc01,  0xfffffc00,  0xfffffc00,  0xfffffc01, /* Words 44 to 47 */
-	0xfffffc00,  0xfffffc00,  0xfffffc00,  0xfffffc00, /* Words 48 to 51 */
-	0xfffffc00,  0xfffffc00,  0xfffffc00,  0xfffffc00, /* Words 52 to 55 */
-	0xfffffc00,  0xfffffc00,  0xfffffc00,  0xfffffc01, /* Words 56 to 59 */
-	0xfffffc00,  0xfffffc00,  0xfffffc00,  0xfffffc01  /* Words 60 to 63 */
+	0x00fcec00,  0x00fcec00,  0x00fcec00,  0x00fcec00, /* Words 0 to 3	*/
+	0x00fcec00,  0x00fcfc00,  0x00fcfc00,  0x00fcec05, /* Words 4 to 7	*/
+	0x00fcec00,  0x00fcec00,  0x00fcec04,  0x00fcec04, /* Words 8 to 11	*/
+	0x00fcec04,  0x00fcec04,  0x00fcec04,  0x00fcec04, /* Words 12 to 15	*/
+	0x00fcec04,  0x00fcec04,  0x0fffec00,  0xffffec00, /* Words 16 to 19	*/
+	0xffffec00,  0xffffec00,  0xffffec00,  0xffffec01, /* Words 20 to 23	*/
+	0x00ffec00,  0x00ffec00,  0x00f3ec00,  0x0fffec00, /* Words 24 to 27	*/
+	0x0ffffc04,  0xffffec00,  0xffffec00,  0xffffec01, /* Words 28 to 31	*/
+	0x00ffec00,  0x00ffec00,  0x00f3ec04,  0x00f3ec04, /* Words 32 to 35	*/
+	0x00f3ec04,  0x00f3ec04,  0x00f3ec04,  0x00f3ec04, /* Words 36 to 39	*/
+	0x00f3ec04,  0x00f3ec04,  0x0fffec00,  0xffffec00, /* Words 40 to 43	*/
+	0xffffec00,  0xffffec00,  0xffffec00,  0xffffec01, /* Words 44 to 47	*/
+	0xffffec00,  0xffffec00,  0xffffec00,  0xffffec00, /* Words 48 to 51	*/
+	0xffffec00,  0xffffec00,  0xffffec00,  0xffffec00, /* Words 52 to 55	*/
+	0xffffec00,  0xffffec00,  0xffffec00,  0xffffec01, /* Words 56 to 59	*/
+	0xffffec00,  0xffffec00,  0xffffec00,  0xffffec01  /* Words 60 to 63	*/
 };
 
+/* LIME UPM B Table Configuration Code */
+static unsigned int UPMTableB[] =
+{
+	0x0ffefc00,  0x0ffcfc00,  0x0ffcfc00,  0x0ffcfc00, /* Words 0 to 3	*/
+	0x0ffcfc00,  0x0ffcfc00,  0x0ffcfc04,  0x0ffffc01, /* Words 4 to 7	*/
+	0x0ffefc00,  0x0ffcfc00,  0x0ffcfc00,  0x0ffcfc00, /* Words 8 to 11	*/
+	0x0ffcfc00,  0x0ffcfc00,  0x0ffcfc04,  0x0ffcfc04, /* Words 12 to 15	*/
+	0x0ffcfc04,  0x0ffcfc04,  0x0ffcfc04,  0x0ffcfc04, /* Words 16 to 19	*/
+	0x0ffcfc04,  0x0ffcfc04,  0x0ffffc00,  0xfffffc01, /* Words 20 to 23	*/
+	0x0cfffc00,  0x00fffc00,  0x00fffc00,  0x00fffc00, /* Words 24 to 27	*/
+	0x00fffc00,  0x00fffc00,  0x00fffc04,  0x0ffffc01, /* Words 28 to 31	*/
+	0x0cfffc00,  0x00fffc00,  0x00fffc00,  0x00fffc00, /* Words 32 to 35	*/
+	0x00fffc00,  0x00fffc00,  0x00fffc04,  0x00fffc04, /* Words 36 to 39	*/
+	0x00fffc04,  0x00fffc04,  0x00fffc04,  0x00fffc04, /* Words 40 to 43	*/
+	0x00fffc04,  0x00fffc04,  0x0ffffc00,  0xfffffc01, /* Words 44 to 47	*/
+	0xfffffc00,  0xfffffc00,  0xfffffc00,  0xfffffc00, /* Words 48 to 51	*/
+	0xfffffc00,  0xfffffc00,  0xfffffc00,  0xfffffc00, /* Words 52 to 55	*/
+	0xfffffc00,  0xfffffc00,  0xfffffc00,  0xfffffc01, /* Words 56 to 59	*/
+	0xfffffc00,  0xfffffc00,  0xfffffc00,  0xfffffc01  /* Words 60 to 63	*/
+};
 #endif
diff --git a/board/sorcery/sorcery.c b/board/sorcery/sorcery.c
index 2b789d474..90d429802 100644
--- a/board/sorcery/sorcery.c
+++ b/board/sorcery/sorcery.c
@@ -26,6 +26,7 @@
 #include <asm/processor.h>
 #include <asm/mmu.h>
 #include <pci.h>
+#include <netdev.h>
 
 phys_size_t initdram (int board_type)
 {
@@ -33,7 +34,7 @@ phys_size_t initdram (int board_type)
 
 	size = dramSetup ();
 
-	return get_ram_size(CFG_SDRAM_BASE, size);
+	return get_ram_size(CONFIG_SYS_SDRAM_BASE, size);
 }
 
 int checkboard (void)
@@ -58,3 +59,10 @@ void pci_init_board (void)
 	pci_mpc8220_init (&hose);
 #endif /* CONFIG_PCI */
 }
+
+int board_eth_init(bd_t *bis)
+{
+	/* Initialize built-in FEC first */
+	cpu_eth_init(bis);
+	return pci_eth_init(bis);
+}
diff --git a/board/spc1920/hpi.c b/board/spc1920/hpi.c
index cf21b215b..26d0f9c33 100644
--- a/board/spc1920/hpi.c
+++ b/board/spc1920/hpi.c
@@ -144,16 +144,16 @@ static int hpi_tiny_autoinc_test(void);
 /* init the host port interface on UPMA */
 int hpi_init(void)
 {
-	volatile immap_t *immr = (immap_t *) CFG_IMMR;
+	volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
 	volatile memctl8xx_t *memctl = &immr->im_memctl;
-	volatile spc1920_pld_t *pld = (spc1920_pld_t *) CFG_SPC1920_PLD_BASE;
+	volatile spc1920_pld_t *pld = (spc1920_pld_t *) CONFIG_SYS_SPC1920_PLD_BASE;
 
 	upmconfig(UPMA, (uint *)dsp_table_slow, sizeof(dsp_table_slow)/sizeof(uint));
 	udelay(100);
 
-	memctl->memc_mamr = CFG_MAMR;
-	memctl->memc_or3 = CFG_OR3;
-	memctl->memc_br3 = CFG_BR3;
+	memctl->memc_mamr = CONFIG_SYS_MAMR;
+	memctl->memc_or3 = CONFIG_SYS_OR3;
+	memctl->memc_br3 = CONFIG_SYS_BR3;
 
 	/* reset dsp */
 	dsp_reset();
@@ -170,7 +170,7 @@ int hpi_init(void)
 /* activate the Host Port interface */
 static int hpi_activate(void)
 {
-	volatile spc1920_pld_t *pld = (spc1920_pld_t *) CFG_SPC1920_PLD_BASE;
+	volatile spc1920_pld_t *pld = (spc1920_pld_t *) CONFIG_SYS_SPC1920_PLD_BASE;
 
 	/* turn on hpi */
 	pld->dsp_hpi_on = 0x1;
@@ -193,7 +193,7 @@ static int hpi_activate(void)
 /* turn off the host port interface */
 static void hpi_inactivate(void)
 {
-	volatile spc1920_pld_t *pld = (spc1920_pld_t *) CFG_SPC1920_PLD_BASE;
+	volatile spc1920_pld_t *pld = (spc1920_pld_t *) CONFIG_SYS_SPC1920_PLD_BASE;
 
 	/* deactivate hpi */
 	pld->dsp_hpi_on = 0x0;
@@ -210,7 +210,7 @@ static void hpi_inactivate(void)
 /* reset the DSP */
 static void dsp_reset(void)
 {
-	volatile spc1920_pld_t *pld = (spc1920_pld_t *) CFG_SPC1920_PLD_BASE;
+	volatile spc1920_pld_t *pld = (spc1920_pld_t *) CONFIG_SYS_SPC1920_PLD_BASE;
 	pld->dsp_reset = 0x1;
 	pld->dsp_hpi_on = 0x0;
 
diff --git a/board/spc1920/spc1920.c b/board/spc1920/spc1920.c
index a32aad0ee..ee939bf24 100644
--- a/board/spc1920/spc1920.c
+++ b/board/spc1920/spc1920.c
@@ -84,9 +84,9 @@ const uint sdram_table[] = {
 
 phys_size_t initdram (int board_type)
 {
-	volatile immap_t *immr = (immap_t *) CFG_IMMR;
+	volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
 	volatile memctl8xx_t *memctl = &immr->im_memctl;
-	/* volatile spc1920_pld_t *pld = (spc1920_pld_t *) CFG_SPC1920_PLD_BASE; */
+	/* volatile spc1920_pld_t *pld = (spc1920_pld_t *) CONFIG_SYS_SPC1920_PLD_BASE; */
 
 	long int size_b0;
 	long int size8, size9;
@@ -99,19 +99,19 @@ phys_size_t initdram (int board_type)
 
 	udelay(100);
 
-	memctl->memc_mptpr = CFG_MPTPR;
+	memctl->memc_mptpr = CONFIG_SYS_MPTPR;
 
 	/* burst length=4, burst type=sequential, CAS latency=2 */
-	memctl->memc_mar = CFG_MAR;
+	memctl->memc_mar = CONFIG_SYS_MAR;
 
 	/*
 	 * Map controller bank 1 to the SDRAM bank at preliminary address.
 	 */
-	memctl->memc_or1 = CFG_OR1_PRELIM;
-	memctl->memc_br1 = CFG_BR1_PRELIM;
+	memctl->memc_or1 = CONFIG_SYS_OR1_PRELIM;
+	memctl->memc_br1 = CONFIG_SYS_BR1_PRELIM;
 
 	/* initialize memory address register */
-	memctl->memc_mbmr = CFG_MBMR_8COL; /* refresh not enabled yet */
+	memctl->memc_mbmr = CONFIG_SYS_MBMR_8COL; /* refresh not enabled yet */
 
 	/* mode initialization (offset 5) */
 	udelay (200);				/* 0x80006105 */
@@ -132,7 +132,7 @@ phys_size_t initdram (int board_type)
 	/* Need at least 10 DRAM accesses to stabilize */
 	for (i = 0; i < 10; ++i) {
 		volatile unsigned long *addr =
-			(volatile unsigned long *) CFG_SDRAM_BASE;
+			(volatile unsigned long *) CONFIG_SYS_SDRAM_BASE;
 		unsigned long val;
 
 		val = *(addr + i);
@@ -144,22 +144,22 @@ phys_size_t initdram (int board_type)
 	 *
 	 * try 8 column mode
 	 */
-	size8 = dram_size (CFG_MBMR_8COL, (long *)CFG_SDRAM_BASE, SDRAM_MAX_SIZE);
+	size8 = dram_size (CONFIG_SYS_MBMR_8COL, (long *)CONFIG_SYS_SDRAM_BASE, SDRAM_MAX_SIZE);
 
 	udelay (1000);
 
 	/*
 	 * try 9 column mode
 	 */
-	size9 = dram_size (CFG_MBMR_9COL, (long *)CFG_SDRAM_BASE, SDRAM_MAX_SIZE);
+	size9 = dram_size (CONFIG_SYS_MBMR_9COL, (long *)CONFIG_SYS_SDRAM_BASE, SDRAM_MAX_SIZE);
 
 	if (size8 < size9) {		/* leave configuration at 9 columns */
 		size_b0 = size9;
-		memctl->memc_mbmr = CFG_MBMR_9COL | MBMR_PTBE;
+		memctl->memc_mbmr = CONFIG_SYS_MBMR_9COL | MBMR_PTBE;
 		udelay (500);
 	} else {			/* back to 8 columns            */
 		size_b0 = size8;
-		memctl->memc_mbmr = CFG_MBMR_8COL | MBMR_PTBE;
+		memctl->memc_mbmr = CONFIG_SYS_MBMR_8COL | MBMR_PTBE;
 		udelay (500);
 	}
 
@@ -169,15 +169,15 @@ phys_size_t initdram (int board_type)
 
 	memctl->memc_or1 = ((-size_b0) & 0xFFFF0000) |
 			OR_CSNT_SAM | OR_G5LS | SDRAM_TIMING;
-	memctl->memc_br1 = (CFG_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMB | BR_V;
+	memctl->memc_br1 = (CONFIG_SYS_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMB | BR_V;
 	udelay (1000);
 
 	/* initalize the DSP Host Port Interface */
 	hpi_init();
 
 	/* FRAM Setup */
-	memctl->memc_or4 = CFG_OR4;
-	memctl->memc_br4 = CFG_BR4;
+	memctl->memc_or4 = CONFIG_SYS_OR4;
+	memctl->memc_br4 = CONFIG_SYS_BR4;
 	udelay(1000);
 
 	return (size_b0);
@@ -193,7 +193,7 @@ phys_size_t initdram (int board_type)
 static long int dram_size (long int mbmr_value, long int *base,
 			   long int maxsize)
 {
-	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
 	volatile memctl8xx_t *memctl = &immap->im_memctl;
 
 	memctl->memc_mbmr = mbmr_value;
@@ -207,7 +207,7 @@ static long int dram_size (long int mbmr_value, long int *base,
 
 int board_early_init_f(void)
 {
-	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
 
 	/* Set Go/NoGo led (PA15) to color red */
 	immap->im_ioport.iop_papar &= ~0x1;
@@ -240,7 +240,7 @@ int board_early_init_f(void)
 	immap->im_ioport.iop_pddat |= 0x0020;
 
 
-#ifdef CFG_SMC1_PLD_CLK4 /* SMC1 uses CLK4 from PLD */
+#ifdef CONFIG_SYS_SMC1_PLD_CLK4 /* SMC1 uses CLK4 from PLD */
 	immap->im_cpm.cp_simode |= 0x7000;
 	immap->im_cpm.cp_simode &= ~(0x8000);
 #endif
diff --git a/board/spc1920/u-boot.lds b/board/spc1920/u-boot.lds
index 8c46e4677..5af36c97a 100644
--- a/board/spc1920/u-boot.lds
+++ b/board/spc1920/u-boot.lds
@@ -66,7 +66,7 @@ SECTIONS
     lib_ppc/time.o		(.text)
 
     . = DEFINED(env_offset) ? env_offset : .;
-    common/environment.o	(.ppcenv)
+    common/env_embedded.o	(.ppcenv)
 
     *(.text)
     *(.fixup)
@@ -137,6 +137,7 @@ SECTIONS
    *(.dynbss)
    *(.bss)
    *(COMMON)
+   . = ALIGN(4);
   }
   _end = . ;
   PROVIDE (end = .);
diff --git a/board/spd8xx/flash.c b/board/spd8xx/flash.c
index 8c0bb4f56..fb2fb6a7d 100644
--- a/board/spd8xx/flash.c
+++ b/board/spd8xx/flash.c
@@ -24,7 +24,7 @@
 #include <common.h>
 #include <mpc8xx.h>
 
-flash_info_t    flash_info[CFG_MAX_FLASH_BANKS];
+flash_info_t    flash_info[CONFIG_SYS_MAX_FLASH_BANKS];
 
 /*-----------------------------------------------------------------------
  */
diff --git a/board/spd8xx/spd8xx.c b/board/spd8xx/spd8xx.c
index 6387f8a65..9e9678d62 100644
--- a/board/spd8xx/spd8xx.c
+++ b/board/spd8xx/spd8xx.c
@@ -145,7 +145,7 @@ int checkboard (void)
 
 phys_size_t initdram (int board_type)
 {
-	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
 	volatile memctl8xx_t *memctl = &immap->im_memctl;
 	long int size_b0;
 
@@ -153,23 +153,23 @@ phys_size_t initdram (int board_type)
 	/*
 	 * Map controller bank 2 to the SRAM bank at preliminary address.
 	 */
-	memctl->memc_or2 = CFG_OR2;
-	memctl->memc_br2 = CFG_BR2;
+	memctl->memc_or2 = CONFIG_SYS_OR2;
+	memctl->memc_br2 = CONFIG_SYS_BR2;
 #endif
 
 	/*
 	 * Map controller bank 4 to the PER8 bank.
 	 */
-	memctl->memc_or4 = CFG_OR4;
-	memctl->memc_br4 = CFG_BR4;
+	memctl->memc_or4 = CONFIG_SYS_OR4;
+	memctl->memc_br4 = CONFIG_SYS_BR4;
 
 #if 0
 	/* Configure SHARC at UMA */
 	upmconfig (UPMA, (uint *) sharc_table,
 		   sizeof (sharc_table) / sizeof (uint));
 	/* Map controller bank 5 to the SHARC */
-	memctl->memc_or5 = CFG_OR5;
-	memctl->memc_br5 = CFG_BR5;
+	memctl->memc_or5 = CONFIG_SYS_OR5;
+	memctl->memc_br5 = CONFIG_SYS_BR5;
 #endif
 
 	memctl->memc_mamr = 0x00001000;
@@ -178,17 +178,17 @@ phys_size_t initdram (int board_type)
 	upmconfig (UPMB, (uint *) sdram_table,
 		   sizeof (sdram_table) / sizeof (uint));
 
-	memctl->memc_mptpr = CFG_MPTPR_1BK_8K;
+	memctl->memc_mptpr = CONFIG_SYS_MPTPR_1BK_8K;
 
 	memctl->memc_mar = 0x00000088;
 
 	/*
 	 * Map controller bank 3 to the SDRAM bank at preliminary address.
 	 */
-	memctl->memc_or3 = CFG_OR3_PRELIM;
-	memctl->memc_br3 = CFG_BR3_PRELIM;
+	memctl->memc_or3 = CONFIG_SYS_OR3_PRELIM;
+	memctl->memc_br3 = CONFIG_SYS_BR3_PRELIM;
 
-	memctl->memc_mbmr = CFG_MBMR_8COL;	/* refresh not enabled yet */
+	memctl->memc_mbmr = CONFIG_SYS_MBMR_8COL;	/* refresh not enabled yet */
 
 	udelay (200);
 	memctl->memc_mcr = 0x80806105;
@@ -205,10 +205,10 @@ phys_size_t initdram (int board_type)
 	 * Check Bank 0 Memory Size for re-configuration
 	 */
 	size_b0 =
-		dram_size (CFG_MBMR_8COL, SDRAM_BASE3_PRELIM,
+		dram_size (CONFIG_SYS_MBMR_8COL, SDRAM_BASE3_PRELIM,
 			   SDRAM_MAX_SIZE);
 
-	memctl->memc_mbmr = CFG_MBMR_8COL | MBMR_PTBE;
+	memctl->memc_mbmr = CONFIG_SYS_MBMR_8COL | MBMR_PTBE;
 
 	return (size_b0);
 }
@@ -226,7 +226,7 @@ phys_size_t initdram (int board_type)
 static long int dram_size (long int mamr_value, long int *base,
 			   long int maxsize)
 {
-	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
 	volatile memctl8xx_t *memctl = &immap->im_memctl;
 
 	memctl->memc_mbmr = mamr_value;
@@ -238,7 +238,7 @@ static long int dram_size (long int mamr_value, long int *base,
 
 void reset_phy (void)
 {
-	immap_t *immr = (immap_t *) CFG_IMMR;
+	immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
 	ushort sreg;
 
 	/* Configure extra port pins for NS DP83843 PHY */
@@ -274,21 +274,21 @@ void reset_phy (void)
 
 void ide_set_reset (int on)
 {
-	volatile immap_t *immr = (immap_t *) CFG_IMMR;
+	volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
 
 	/*
 	 * Configure PC for IDE Reset Pin
 	 */
 	if (on) {		/* assert RESET */
-		immr->im_ioport.iop_pcdat &= ~(CFG_PC_IDE_RESET);
+		immr->im_ioport.iop_pcdat &= ~(CONFIG_SYS_PC_IDE_RESET);
 	} else {		/* release RESET */
-		immr->im_ioport.iop_pcdat |= CFG_PC_IDE_RESET;
+		immr->im_ioport.iop_pcdat |= CONFIG_SYS_PC_IDE_RESET;
 	}
 
 	/* program port pin as GPIO output */
-	immr->im_ioport.iop_pcpar &= ~(CFG_PC_IDE_RESET);
-	immr->im_ioport.iop_pcso &= ~(CFG_PC_IDE_RESET);
-	immr->im_ioport.iop_pcdir |= CFG_PC_IDE_RESET;
+	immr->im_ioport.iop_pcpar &= ~(CONFIG_SYS_PC_IDE_RESET);
+	immr->im_ioport.iop_pcso &= ~(CONFIG_SYS_PC_IDE_RESET);
+	immr->im_ioport.iop_pcdir |= CONFIG_SYS_PC_IDE_RESET;
 }
 
 /* ------------------------------------------------------------------------- */
diff --git a/board/spd8xx/u-boot.lds b/board/spd8xx/u-boot.lds
index 13b29084f..7d94421dc 100644
--- a/board/spd8xx/u-boot.lds
+++ b/board/spd8xx/u-boot.lds
@@ -53,7 +53,7 @@ SECTIONS
   .text      :
   {
     cpu/mpc8xx/start.o	(.text)
-    common/environment.o(.text)
+    common/env_embedded.o(.text)
     *(.text)
     *(.fixup)
     *(.got1)
@@ -123,6 +123,7 @@ SECTIONS
    *(.dynbss)
    *(.bss)
    *(COMMON)
+   . = ALIGN(4);
   }
   _end = . ;
   PROVIDE (end = .);
diff --git a/board/spd8xx/u-boot.lds.debug b/board/spd8xx/u-boot.lds.debug
index fd2245f57..67d37ae33 100644
--- a/board/spd8xx/u-boot.lds.debug
+++ b/board/spd8xx/u-boot.lds.debug
@@ -62,7 +62,7 @@ SECTIONS
     lib_ppc/extable.o	(.text)
 
     . = env_offset;
-    common/environment.o(.text)
+    common/env_embedded.o(.text)
 
     *(.text)
     *(.fixup)
diff --git a/board/ssv/adnpesc1/adnpesc1.c b/board/ssv/adnpesc1/adnpesc1.c
index 71de20899..9d3274149 100644
--- a/board/ssv/adnpesc1/adnpesc1.c
+++ b/board/ssv/adnpesc1/adnpesc1.c
@@ -76,14 +76,14 @@ int spi_cs_is_valid(unsigned int bus, unsigned int cs)
 
 void spi_cs_activate(struct spi_slave *slave)
 {
-	nios_spi_t *spi = (nios_spi_t *)CFG_NIOS_SPIBASE;
+	nios_spi_t *spi = (nios_spi_t *)CONFIG_SYS_NIOS_SPIBASE;
 
 	spi->slaveselect = SPI_RTC_CS_MASK;	/* activate (1) */
 }
 
 void spi_cs_deactivate(struct spi_slave *slave)
 {
-	nios_spi_t *spi = (nios_spi_t *)CFG_NIOS_SPIBASE;
+	nios_spi_t *spi = (nios_spi_t *)CONFIG_SYS_NIOS_SPIBASE;
 
 	spi->slaveselect = 0;			/* deactivate (0) */
 }
diff --git a/board/ssv/adnpesc1/config.mk b/board/ssv/adnpesc1/config.mk
index 7d8eb03d8..cf0544572 100644
--- a/board/ssv/adnpesc1/config.mk
+++ b/board/ssv/adnpesc1/config.mk
@@ -22,7 +22,7 @@
 # MA 02111-1307 USA
 #
 
-TEXT_BASE = 0x02fc0000	# ATTENTION: notice your CFG_MONITOR_LEN setting
+TEXT_BASE = 0x02fc0000	# ATTENTION: notice your CONFIG_SYS_MONITOR_LEN setting
 
 ifeq ($(debug),1)
 PLATFORM_CPPFLAGS += -DDEBUG
diff --git a/board/ssv/adnpesc1/flash.c b/board/ssv/adnpesc1/flash.c
index fd8379b1b..882630c58 100644
--- a/board/ssv/adnpesc1/flash.c
+++ b/board/ssv/adnpesc1/flash.c
@@ -36,7 +36,7 @@
 /*---------------------------------------------------------------------*/
 #define	BANKSZ	(8 * 1024 * 1024)
 #define	SECTSZ	(64 * 1024)
-#define	UBOOTSECS ((CFG_MONITOR_LEN + CFG_ENV_SIZE) / SECTSZ)
+#define	UBOOTSECS ((CONFIG_SYS_MONITOR_LEN + CONFIG_ENV_SIZE) / SECTSZ)
 #define	UBOOTAREA (UBOOTSECS * 64 * 1024)	/* monitor / env area */
 
 /*---------------------------------------------------------------------*/
@@ -47,16 +47,16 @@ unsigned long flash_init (void)
 	flash_info_t *fli = &flash_info[0];
 
 	fli->size = BANKSZ;
-	fli->sector_count = CFG_MAX_FLASH_SECT;
+	fli->sector_count = CONFIG_SYS_MAX_FLASH_SECT;
 	fli->flash_id = FLASH_MAN_AMD + FLASH_AMLV640U;
 
-	addr = CFG_FLASH_BASE;
+	addr = CONFIG_SYS_FLASH_BASE;
 	for (i = 0; i < fli->sector_count; ++i) {
 		fli->start[i] = addr;
 		addr += SECTSZ;
 
 		/* Protect monitor / environment area */
-		if (addr <= (CFG_FLASH_BASE + UBOOTAREA))
+		if (addr <= (CONFIG_SYS_FLASH_BASE + UBOOTAREA))
 			fli->protect[i] = 1;
 		else
 			fli->protect[i] = 0;
diff --git a/board/ssv/adnpesc1/vectors.S b/board/ssv/adnpesc1/vectors.S
index fb7e17e43..8b2da2fed 100644
--- a/board/ssv/adnpesc1/vectors.S
+++ b/board/ssv/adnpesc1/vectors.S
@@ -57,12 +57,12 @@
 	.align	4
 _vectors:
 
-#if	defined(CFG_NIOS_CPU_OCI_BASE)
+#if	defined(CONFIG_SYS_NIOS_CPU_OCI_BASE)
 	/* OCI does the reset job */
 	.long	_def_xhandler@h		/* Vector 0  - NMI / Reset */
 #else
 	/* there is no OCI, so we have to do a direct reset jump here */
-	.long	CFG_NIOS_CPU_RST_VECT	/* Vector 0  - Reset to GERMS */
+	.long	CONFIG_SYS_NIOS_CPU_RST_VECT	/* Vector 0  - Reset to GERMS */
 #endif
 	.long	_cwp_lolimit@h		/* Vector 1  - underflow */
 	.long	_cwp_hilimit@h		/* Vector 2  - overflow	*/
@@ -80,7 +80,7 @@ _vectors:
 	.long	_def_xhandler@h		/* Vector 13 - future reserved */
 	.long	_def_xhandler@h		/* Vector 14 - future reserved */
 	.long	_def_xhandler@h		/* Vector 15 - future reserved */
-#if	(CFG_NIOS_TMRIRQ == 16)
+#if	(CONFIG_SYS_NIOS_TMRIRQ == 16)
 	.long	_timebase_int@h		/* Vector 16 - lopri timer*/
 #else
 	.long	_def_xhandler@h		/* Vector 16 */
@@ -118,7 +118,7 @@ _vectors:
 	.long	_def_xhandler@h		/* Vector 47 */
 	.long	_def_xhandler@h		/* Vector 48 */
 	.long	_def_xhandler@h		/* Vector 49 */
-#if	(CFG_NIOS_TMRIRQ == 50)
+#if	(CONFIG_SYS_NIOS_TMRIRQ == 50)
 	.long	_timebase_int@h		/* Vector 50 - lopri timer*/
 #else
 	.long	_def_xhandler@h		/* Vector 50 */
diff --git a/board/ssv/common/flash.c b/board/ssv/common/flash.c
index 70cab7fa2..70bf9d678 100644
--- a/board/ssv/common/flash.c
+++ b/board/ssv/common/flash.c
@@ -29,7 +29,7 @@
 #include <watchdog.h>
 #include <nios.h>
 
-flash_info_t flash_info[CFG_MAX_FLASH_BANKS];
+flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];
 
 /*--------------------------------------------------------------------*/
 void flash_print_info (flash_info_t * info)
@@ -72,8 +72,8 @@ void flash_print_info (flash_info_t * info)
 
 int flash_erase (flash_info_t * info, int s_first, int s_last)
 {
-	volatile CFG_FLASH_WORD_SIZE *addr = (CFG_FLASH_WORD_SIZE *) (info->start[0]);
-	volatile CFG_FLASH_WORD_SIZE *addr2;
+	volatile CONFIG_SYS_FLASH_WORD_SIZE *addr = (CONFIG_SYS_FLASH_WORD_SIZE *) (info->start[0]);
+	volatile CONFIG_SYS_FLASH_WORD_SIZE *addr2;
 	int prot, sect, wait;
 	unsigned oldpri;
 	ulong start;
@@ -116,7 +116,7 @@ int flash_erase (flash_info_t * info, int s_first, int s_last)
 	 */
 	for (sect = s_first; sect <= s_last; sect++) {
 		if (info->protect[sect] == 0) {	/* not protected */
-			addr2 = (CFG_FLASH_WORD_SIZE *) (info->start[sect]);
+			addr2 = (CONFIG_SYS_FLASH_WORD_SIZE *) (info->start[sect]);
 			*addr = 0xf0;
 			*(addr+0xAAA/2) = 0xaa;
 			*(addr+0x554/2) = 0x55;
@@ -135,7 +135,7 @@ int flash_erase (flash_info_t * info, int s_first, int s_last)
 					udelay (125 * 1000);
 				}
 				putc ('.');
-				if (get_timer (start) > CFG_FLASH_ERASE_TOUT) {
+				if (get_timer (start) > CONFIG_SYS_FLASH_ERASE_TOUT) {
 					printf ("timeout\n");
 					return 1;
 				}
@@ -163,14 +163,14 @@ int flash_erase (flash_info_t * info, int s_first, int s_last)
 int write_buff (flash_info_t * info, uchar * srcbuffer, ulong addr, ulong cnt)
 {
 
-	volatile CFG_FLASH_WORD_SIZE *cmd = (vu_short *) info->start[0];
-	volatile CFG_FLASH_WORD_SIZE *dst = (vu_short *) addr;
-	CFG_FLASH_WORD_SIZE *src = (void *) srcbuffer;
-	CFG_FLASH_WORD_SIZE b;
+	volatile CONFIG_SYS_FLASH_WORD_SIZE *cmd = (vu_short *) info->start[0];
+	volatile CONFIG_SYS_FLASH_WORD_SIZE *dst = (vu_short *) addr;
+	CONFIG_SYS_FLASH_WORD_SIZE *src = (void *) srcbuffer;
+	CONFIG_SYS_FLASH_WORD_SIZE b;
 	unsigned oldpri;
 	ulong start;
 
-	cnt /= sizeof(CFG_FLASH_WORD_SIZE);
+	cnt /= sizeof(CONFIG_SYS_FLASH_WORD_SIZE);
 	while (cnt) {
 		/* Check for sufficient erase */
 		b = *src;
@@ -192,7 +192,7 @@ int write_buff (flash_info_t * info, uchar * srcbuffer, ulong addr, ulong cnt)
 		/* Verify write */
 		start = get_timer (0);
 		while (*dst != b) {
-			if (get_timer (start) > CFG_FLASH_WRITE_TOUT) {
+			if (get_timer (start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
 				*cmd = 0xf0;
 				return 1;
 			}
diff --git a/board/ssv/common/post.c b/board/ssv/common/post.c
index a5f29c1a3..c7a9ccc89 100644
--- a/board/ssv/common/post.c
+++ b/board/ssv/common/post.c
@@ -25,19 +25,19 @@
 
 #if defined(CONFIG_POST) || defined(CONFIG_LOGBUFFER)
 
-#if !defined(CFG_NIOS_POST_WORD_ADDR)
-#error "*** CFG_NIOS_POST_WORD_ADDR not defined ***"
+#if !defined(CONFIG_SYS_NIOS_POST_WORD_ADDR)
+#error "*** CONFIG_SYS_NIOS_POST_WORD_ADDR not defined ***"
 #endif
 
 void post_word_store (ulong a)
 {
-	volatile void *save_addr = (void *)(CFG_NIOS_POST_WORD_ADDR);
+	volatile void *save_addr = (void *)(CONFIG_SYS_NIOS_POST_WORD_ADDR);
 	*(volatile ulong *) save_addr = a;
 }
 
 ulong post_word_load (void)
 {
-	volatile void *save_addr = (void *)(CFG_NIOS_POST_WORD_ADDR);
+	volatile void *save_addr = (void *)(CONFIG_SYS_NIOS_POST_WORD_ADDR);
 	return *(volatile ulong *) save_addr;
 }
 
diff --git a/board/stxgp3/ddr.c b/board/stxgp3/ddr.c
index 45372f427..7850794d6 100644
--- a/board/stxgp3/ddr.c
+++ b/board/stxgp3/ddr.c
@@ -10,6 +10,7 @@
 #include <i2c.h>
 
 #include <asm/fsl_ddr_sdram.h>
+#include <asm/fsl_ddr_dimm_params.h>
 
 static void
 get_spd(ddr1_spd_eeprom_t *spd, unsigned char i2c_address)
@@ -40,7 +41,9 @@ fsl_ddr_get_spd(ddr1_spd_eeprom_t *ctrl_dimms_spd,
 	}
 }
 
-void fsl_ddr_board_options(memctl_options_t *popts, unsigned int ctrl_num)
+void fsl_ddr_board_options(memctl_options_t *popts,
+				dimm_params_t *pdimm,
+				unsigned int ctrl_num)
 {
 	/*
 	 * Factors to consider for CPO:
diff --git a/board/stxgp3/flash.c b/board/stxgp3/flash.c
index 032989ba5..61c960247 100644
--- a/board/stxgp3/flash.c
+++ b/board/stxgp3/flash.c
@@ -37,19 +37,19 @@
 
 #include <common.h>
 
-#if !defined(CFG_NO_FLASH)
+#if !defined(CONFIG_SYS_NO_FLASH)
 
-flash_info_t	flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips	*/
+flash_info_t	flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips	*/
 
-#if defined(CFG_ENV_IS_IN_FLASH)
-# ifndef  CFG_ENV_ADDR
-#  define CFG_ENV_ADDR	(CFG_FLASH_BASE + CFG_ENV_OFFSET)
+#if defined(CONFIG_ENV_IS_IN_FLASH)
+# ifndef  CONFIG_ENV_ADDR
+#  define CONFIG_ENV_ADDR	(CONFIG_SYS_FLASH_BASE + CONFIG_ENV_OFFSET)
 # endif
-# ifndef  CFG_ENV_SIZE
-#  define CFG_ENV_SIZE	CFG_ENV_SECT_SIZE
+# ifndef  CONFIG_ENV_SIZE
+#  define CONFIG_ENV_SIZE	CONFIG_ENV_SECT_SIZE
 # endif
-# ifndef  CFG_ENV_SECT_SIZE
-#  define CFG_ENV_SECT_SIZE  CFG_ENV_SIZE
+# ifndef  CONFIG_ENV_SECT_SIZE
+#  define CONFIG_ENV_SECT_SIZE  CONFIG_ENV_SIZE
 # endif
 #endif
 
@@ -72,7 +72,7 @@ unsigned long flash_init (void)
 	/* Init: enable write,
 	 * or we cannot even write flash commands
 	 */
-	for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) {
+	for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
 		flash_info[i].flash_id = FLASH_UNKNOWN;
 
 		/* set the default sector offset */
@@ -80,7 +80,7 @@ unsigned long flash_init (void)
 
 	/* Static FLASH Bank configuration here - FIXME XXX */
 
-	size = flash_get_size((vu_long *)CFG_FLASH_BASE, &flash_info[0]);
+	size = flash_get_size((vu_long *)CONFIG_SYS_FLASH_BASE, &flash_info[0]);
 
 	if (flash_info[0].flash_id == FLASH_UNKNOWN) {
 		printf ("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n",
@@ -88,22 +88,22 @@ unsigned long flash_init (void)
 	}
 
 	/* Re-do sizing to get full correct info */
-	size = flash_get_size((vu_long *)CFG_FLASH_BASE, &flash_info[0]);
+	size = flash_get_size((vu_long *)CONFIG_SYS_FLASH_BASE, &flash_info[0]);
 
 	flash_info[0].size = size;
 
-#if CFG_MONITOR_BASE >= CFG_FLASH_BASE
+#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE
 	/* monitor protection ON by default */
 	flash_protect(FLAG_PROTECT_SET,
-		      CFG_MONITOR_BASE,
-		      CFG_MONITOR_BASE+monitor_flash_len-1,
+		      CONFIG_SYS_MONITOR_BASE,
+		      CONFIG_SYS_MONITOR_BASE+monitor_flash_len-1,
 		      &flash_info[0]);
 
-#ifdef	CFG_ENV_IS_IN_FLASH
+#ifdef	CONFIG_ENV_IS_IN_FLASH
 	/* ENV protection ON by default */
 	flash_protect(FLAG_PROTECT_SET,
-		      CFG_ENV_ADDR,
-		      CFG_ENV_ADDR+CFG_ENV_SECT_SIZE-1,
+		      CONFIG_ENV_ADDR,
+		      CONFIG_ENV_ADDR+CONFIG_ENV_SECT_SIZE-1,
 		      &flash_info[0]);
 #endif
 #endif
@@ -329,7 +329,7 @@ int	flash_erase (flash_info_t *info, int s_first, int s_last)
 					asm("sync");
 					return 1;
 				}
-				if ((now=get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+				if ((now=get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
 					printf ("Timeout\n");
 					*addr = 0xFFFFFFFF;	/* reset bank */
 					asm("sync");
@@ -458,7 +458,7 @@ static int write_word (flash_info_t *info, ulong dest, ulong data)
 	flag  = 0;
 
 	while (((csr = *addr) & 0x00800080) != 0x00800080) {
-		if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+		if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
 			flag = 1;
 			break;
 		}
@@ -502,7 +502,7 @@ static int clear_block_lock_bit(vu_long  * addr)
 
 	start = get_timer (0);
 	while((*addr & 0x00800080) != 0x00800080){
-		if ((now=get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+		if ((now=get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
 			printf ("Timeout on clearing Block Lock Bit\n");
 			*addr = 0xFFFFFFFF;	/* reset bank */
 			asm("sync");
@@ -512,4 +512,4 @@ static int clear_block_lock_bit(vu_long  * addr)
 	return 0;
 }
 
-#endif /* !CFG_NO_FLASH */
+#endif /* !CONFIG_SYS_NO_FLASH */
diff --git a/board/stxgp3/law.c b/board/stxgp3/law.c
index a7e9ceb03..ba89f0edc 100644
--- a/board/stxgp3/law.c
+++ b/board/stxgp3/law.c
@@ -46,13 +46,13 @@
 
 struct law_entry law_table[] = {
 #ifndef CONFIG_SPD_EEPROM
-	SET_LAW(CFG_DDR_SDRAM_BASE, LAW_SIZE_128M, LAW_TRGT_IF_DDR),
+	SET_LAW(CONFIG_SYS_DDR_SDRAM_BASE, LAW_SIZE_128M, LAW_TRGT_IF_DDR),
 #endif
-	SET_LAW(CFG_PCI1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI),
+	SET_LAW(CONFIG_SYS_PCI1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI),
 	/* This is not so much the SDRAM map as it is the whole localbus map. */
-	SET_LAW(CFG_LBC_SDRAM_BASE, LAW_SIZE_256M, LAW_TRGT_IF_LBC),
-	SET_LAW(CFG_PCI1_IO_PHYS, LAW_SIZE_16M, LAW_TRGT_IF_PCI),
-	SET_LAW(CFG_RIO_MEM_BASE, LAWAR_SIZE_512M, LAW_TRGT_IF_RIO),
+	SET_LAW(CONFIG_SYS_LBC_SDRAM_BASE, LAW_SIZE_256M, LAW_TRGT_IF_LBC),
+	SET_LAW(CONFIG_SYS_PCI1_IO_PHYS, LAW_SIZE_16M, LAW_TRGT_IF_PCI),
+	SET_LAW(CONFIG_SYS_RIO_MEM_BASE, LAWAR_SIZE_512M, LAW_TRGT_IF_RIO),
 };
 
 int num_law_entries = ARRAY_SIZE(law_table);
diff --git a/board/stxgp3/stxgp3.c b/board/stxgp3/stxgp3.c
index c80f1b381..3804fe080 100644
--- a/board/stxgp3/stxgp3.c
+++ b/board/stxgp3/stxgp3.c
@@ -203,7 +203,7 @@ int
 board_early_init_f(void)
 {
 #if defined(CONFIG_PCI)
-    volatile ccsr_pcix_t *pci = (void *)(CFG_MPC85xx_PCIX_ADDR);
+    volatile ccsr_pcix_t *pci = (void *)(CONFIG_SYS_MPC85xx_PCIX_ADDR);
 
     pci->peer &= 0xfffffffdf; /* disable master abort */
 #endif
@@ -215,7 +215,7 @@ reset_phy(void)
 {
 	volatile uint *blatch;
 
-	blatch = (volatile uint *)CFG_LBC_LCLDEVS_BASE;
+	blatch = (volatile uint *)CONFIG_SYS_LBC_LCLDEVS_BASE;
 
 	/* reset Giga bit Ethernet port if needed here */
 
@@ -267,7 +267,7 @@ show_activity(int flag)
 	if (next_led_update > get_ticks())
 		return;
 
-	blatch = (volatile uint *)CFG_LBC_LCLDEVS_BASE;
+	blatch = (volatile uint *)CONFIG_SYS_LBC_LCLDEVS_BASE;
 
 	led_bit >>= 1;
 	if (led_bit == 0)
@@ -284,7 +284,7 @@ initdram (int board_type)
 
 #if defined(CONFIG_DDR_DLL)
 	{
-		volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR);
+		volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
 		uint temp_ddrdll = 0;
 
 		/* Work around to stabilize DDR DLL */
@@ -308,11 +308,11 @@ initdram (int board_type)
 }
 
 
-#if defined(CFG_DRAM_TEST)
+#if defined(CONFIG_SYS_DRAM_TEST)
 int testdram (void)
 {
-	uint *pstart = (uint *) CFG_MEMTEST_START;
-	uint *pend = (uint *) CFG_MEMTEST_END;
+	uint *pstart = (uint *) CONFIG_SYS_MEMTEST_START;
+	uint *pend = (uint *) CONFIG_SYS_MEMTEST_END;
 	uint *p;
 
 	printf("SDRAM test phase 1:\n");
diff --git a/board/stxgp3/tlb.c b/board/stxgp3/tlb.c
index d4104166a..aa11a5d39 100644
--- a/board/stxgp3/tlb.c
+++ b/board/stxgp3/tlb.c
@@ -28,16 +28,16 @@
 
 struct fsl_e_tlb_entry tlb_table[] = {
 	/* TLB 0 - for temp stack in cache */
-	SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR, CFG_INIT_RAM_ADDR,
+	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR, CONFIG_SYS_INIT_RAM_ADDR,
 		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
 		      0, 0, BOOKE_PAGESZ_4K, 0),
-	SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR + 4 * 1024 , CFG_INIT_RAM_ADDR + 4 * 1024,
+	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024 , CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024,
 		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
 		      0, 0, BOOKE_PAGESZ_4K, 0),
-	SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR + 8 * 1024 , CFG_INIT_RAM_ADDR + 8 * 1024,
+	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024 , CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024,
 		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
 		      0, 0, BOOKE_PAGESZ_4K, 0),
-	SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR + 12 * 1024 , CFG_INIT_RAM_ADDR + 12 * 1024,
+	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024 , CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024,
 		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
 		      0, 0, BOOKE_PAGESZ_4K, 0),
 
@@ -46,7 +46,7 @@ struct fsl_e_tlb_entry tlb_table[] = {
 	 * 0xff000000	16M	FLASH
 	 * Out of reset this entry is only 4K.
 	 */
-	SET_TLB_ENTRY(1, CFG_FLASH_BASE, CFG_FLASH_BASE,
+	SET_TLB_ENTRY(1, CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE,
 		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 		      0, 0, BOOKE_PAGESZ_16M, 1),
 
@@ -54,7 +54,7 @@ struct fsl_e_tlb_entry tlb_table[] = {
 	 * TLB 1:	256M	Non-cacheable, guarded
 	 * 0x80000000	256M	PCI1 MEM First half
 	 */
-	SET_TLB_ENTRY(1, CFG_PCI1_MEM_PHYS, CFG_PCI1_MEM_PHYS,
+	SET_TLB_ENTRY(1, CONFIG_SYS_PCI1_MEM_PHYS, CONFIG_SYS_PCI1_MEM_PHYS,
 		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 		      0, 1, BOOKE_PAGESZ_256M, 1),
 
@@ -62,7 +62,7 @@ struct fsl_e_tlb_entry tlb_table[] = {
 	 * TLB 2:	256M	Non-cacheable, guarded
 	 * 0x90000000	256M	PCI1 MEM Second half
 	 */
-	SET_TLB_ENTRY(1, CFG_PCI1_MEM_PHYS + 0x10000000, CFG_PCI1_MEM_PHYS + 0x10000000,
+	SET_TLB_ENTRY(1, CONFIG_SYS_PCI1_MEM_PHYS + 0x10000000, CONFIG_SYS_PCI1_MEM_PHYS + 0x10000000,
 		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 		      0, 2, BOOKE_PAGESZ_256M, 1),
 
@@ -70,7 +70,7 @@ struct fsl_e_tlb_entry tlb_table[] = {
 	 * TLB 3:	256M	Non-cacheable, guarded
 	 * 0xc0000000	256M	Rapid IO MEM First half
 	 */
-	SET_TLB_ENTRY(1, CFG_RIO_MEM_BASE, CFG_RIO_MEM_BASE,
+	SET_TLB_ENTRY(1, CONFIG_SYS_RIO_MEM_BASE, CONFIG_SYS_RIO_MEM_BASE,
 		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 		      0, 3, BOOKE_PAGESZ_256M, 1),
 
@@ -78,7 +78,7 @@ struct fsl_e_tlb_entry tlb_table[] = {
 	 * TLB 4:	256M	Non-cacheable, guarded
 	 * 0xd0000000	256M	Rapid IO MEM Second half
 	 */
-	SET_TLB_ENTRY(1, CFG_RIO_MEM_BASE + 0x10000000, CFG_RIO_MEM_BASE + 0x10000000,
+	SET_TLB_ENTRY(1, CONFIG_SYS_RIO_MEM_BASE + 0x10000000, CONFIG_SYS_RIO_MEM_BASE + 0x10000000,
 		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 		      0, 4, BOOKE_PAGESZ_256M, 1),
 
@@ -87,7 +87,7 @@ struct fsl_e_tlb_entry tlb_table[] = {
 	 * 0xe000_0000	1M	CCSRBAR
 	 * 0xe200_0000	16M	PCI1 IO
 	 */
-	SET_TLB_ENTRY(1, CFG_CCSRBAR, CFG_CCSRBAR_PHYS,
+	SET_TLB_ENTRY(1, CONFIG_SYS_CCSRBAR, CONFIG_SYS_CCSRBAR_PHYS,
 		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 		      0, 5, BOOKE_PAGESZ_64M, 1),
 
@@ -95,7 +95,7 @@ struct fsl_e_tlb_entry tlb_table[] = {
 	 * TLB 6:	64M	Cacheable, non-guarded
 	 * 0xf000_0000	64M	LBC SDRAM
 	 */
-	SET_TLB_ENTRY(1, CFG_LBC_SDRAM_BASE, CFG_LBC_SDRAM_BASE,
+	SET_TLB_ENTRY(1, CONFIG_SYS_LBC_SDRAM_BASE, CONFIG_SYS_LBC_SDRAM_BASE,
 		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
 		      0, 6, BOOKE_PAGESZ_64M, 1),
 
@@ -103,7 +103,7 @@ struct fsl_e_tlb_entry tlb_table[] = {
 	 * TLB 7:	16K	Non-cacheable, guarded
 	 * 0xfc000000	16K	Configuration Latch register
 	 */
-	SET_TLB_ENTRY(1, CFG_LBC_LCLDEVS_BASE, CFG_LBC_LCLDEVS_BASE,
+	SET_TLB_ENTRY(1, CONFIG_SYS_LBC_LCLDEVS_BASE, CONFIG_SYS_LBC_LCLDEVS_BASE,
 		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 		      0, 7, BOOKE_PAGESZ_16K, 1),
 
@@ -117,11 +117,11 @@ struct fsl_e_tlb_entry tlb_table[] = {
 	 * Likely it needs to be increased by two for these entries.
 	 */
 #error("Update the number of table entries in tlb1_entry")
-	SET_TLB_ENTRY(1, CFG_DDR_SDRAM_BASE, CFG_DDR_SDRAM_BASE,
+	SET_TLB_ENTRY(1, CONFIG_SYS_DDR_SDRAM_BASE, CONFIG_SYS_DDR_SDRAM_BASE,
 		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
 		      0, 8, BOOKE_PAGESZ_64M, 1),
 
-	SET_TLB_ENTRY(1, CFG_DDR_SDRAM_BASE + 0x4000000, CFG_DDR_SDRAM_BASE + 0x4000000,
+	SET_TLB_ENTRY(1, CONFIG_SYS_DDR_SDRAM_BASE + 0x4000000, CONFIG_SYS_DDR_SDRAM_BASE + 0x4000000,
 		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
 		      0, 9, BOOKE_PAGESZ_64M, 1),
 #endif
diff --git a/board/stxgp3/u-boot.lds b/board/stxgp3/u-boot.lds
index d5363be5a..cdcb39a6b 100644
--- a/board/stxgp3/u-boot.lds
+++ b/board/stxgp3/u-boot.lds
@@ -148,6 +148,7 @@ SECTIONS
    *(.dynbss)
    *(.bss)
    *(COMMON)
+   . = ALIGN(4);
   }
   _end = . ;
   PROVIDE (end = .);
diff --git a/board/stxssa/ddr.c b/board/stxssa/ddr.c
index 45372f427..7850794d6 100644
--- a/board/stxssa/ddr.c
+++ b/board/stxssa/ddr.c
@@ -10,6 +10,7 @@
 #include <i2c.h>
 
 #include <asm/fsl_ddr_sdram.h>
+#include <asm/fsl_ddr_dimm_params.h>
 
 static void
 get_spd(ddr1_spd_eeprom_t *spd, unsigned char i2c_address)
@@ -40,7 +41,9 @@ fsl_ddr_get_spd(ddr1_spd_eeprom_t *ctrl_dimms_spd,
 	}
 }
 
-void fsl_ddr_board_options(memctl_options_t *popts, unsigned int ctrl_num)
+void fsl_ddr_board_options(memctl_options_t *popts,
+				dimm_params_t *pdimm,
+				unsigned int ctrl_num)
 {
 	/*
 	 * Factors to consider for CPO:
diff --git a/board/stxssa/law.c b/board/stxssa/law.c
index 8730cdfc4..55dde6675 100644
--- a/board/stxssa/law.c
+++ b/board/stxssa/law.c
@@ -47,14 +47,14 @@
 
 struct law_entry law_table[] = {
 #ifndef CONFIG_SPD_EEPROM
-	SET_LAW(CFG_DDR_SDRAM_BASE, LAW_SIZE_128M, LAW_TRGT_IF_DDR),
+	SET_LAW(CONFIG_SYS_DDR_SDRAM_BASE, LAW_SIZE_128M, LAW_TRGT_IF_DDR),
 #endif
-	SET_LAW(CFG_PCI1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI_1),
-	SET_LAW(CFG_PCI2_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI_2),
-	SET_LAW(CFG_PCI1_IO_PHYS, LAW_SIZE_16M, LAW_TRGT_IF_PCI_1),
-	SET_LAW(CFG_PCI2_IO_PHYS, LAW_SIZE_16M, LAW_TRGT_IF_PCI_2),
+	SET_LAW(CONFIG_SYS_PCI1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI_1),
+	SET_LAW(CONFIG_SYS_PCI2_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI_2),
+	SET_LAW(CONFIG_SYS_PCI1_IO_PHYS, LAW_SIZE_16M, LAW_TRGT_IF_PCI_1),
+	SET_LAW(CONFIG_SYS_PCI2_IO_PHYS, LAW_SIZE_16M, LAW_TRGT_IF_PCI_2),
 	/* Map the whole localbus, including flash and reset latch. */
-	SET_LAW(CFG_LBC_OPTION_BASE, LAWAR_SIZE_256M, LAW_TRGT_IF_LBC),
+	SET_LAW(CONFIG_SYS_LBC_OPTION_BASE, LAWAR_SIZE_256M, LAW_TRGT_IF_LBC),
 };
 
 int num_law_entries = ARRAY_SIZE(law_table);
diff --git a/board/stxssa/stxssa.c b/board/stxssa/stxssa.c
index 124e1233b..73dddf3e0 100644
--- a/board/stxssa/stxssa.c
+++ b/board/stxssa/stxssa.c
@@ -39,6 +39,7 @@
 #include <asm/io.h>
 #include <spd_sdram.h>
 #include <miiphy.h>
+#include <netdev.h>
 
 long int fixed_sdram (void);
 
@@ -206,7 +207,7 @@ reset_phy(void)
 #if 0
 	int	i;
 #endif
-	blatch = (volatile uint *)CFG_LBC_CFGLATCH_BASE;
+	blatch = (volatile uint *)CONFIG_SYS_LBC_CFGLATCH_BASE;
 
 	/* reset Giga bit Ethernet port if needed here */
 
@@ -252,7 +253,7 @@ int
 board_early_init_f(void)
 {
 #if defined(CONFIG_PCI)
-	volatile ccsr_pcix_t *pci = (void *)(CFG_MPC85xx_PCIX_ADDR);
+	volatile ccsr_pcix_t *pci = (void *)(CONFIG_SYS_MPC85xx_PCIX_ADDR);
 
 	pci->peer &= 0xffffffdf; /* disable master abort */
 #endif
@@ -283,7 +284,7 @@ show_activity(int flag)
 	if (next_led_update > get_ticks())
 		return;
 
-	blatch = (volatile uint *)CFG_LBC_CFGLATCH_BASE;
+	blatch = (volatile uint *)CONFIG_SYS_LBC_CFGLATCH_BASE;
 
 	led_bit >>= 1;
 	if (led_bit == 0)
@@ -300,7 +301,7 @@ initdram (int board_type)
 
 #if defined(CONFIG_DDR_DLL)
 	{
-		volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR);
+		volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
 		uint temp_ddrdll = 0;
 
 		/* Work around to stabilize DDR DLL */
@@ -324,11 +325,11 @@ initdram (int board_type)
 }
 
 
-#if defined(CFG_DRAM_TEST)
+#if defined(CONFIG_SYS_DRAM_TEST)
 int testdram (void)
 {
-	uint *pstart = (uint *) CFG_MEMTEST_START;
-	uint *pend = (uint *) CFG_MEMTEST_END;
+	uint *pstart = (uint *) CONFIG_SYS_MEMTEST_START;
+	uint *pend = (uint *) CONFIG_SYS_MEMTEST_END;
 	uint *p;
 
 	printf("SDRAM test phase 1:\n");
@@ -400,3 +401,9 @@ pci_init_board(void)
 	pci_mpc85xx_init(hose);
 #endif /* CONFIG_PCI */
 }
+
+int board_eth_init(bd_t *bis)
+{
+	cpu_eth_init(bis);	/* Initialize TSECs first */
+	return pci_eth_init(bis);
+}
diff --git a/board/stxssa/tlb.c b/board/stxssa/tlb.c
index 86cbd1127..0386432b6 100644
--- a/board/stxssa/tlb.c
+++ b/board/stxssa/tlb.c
@@ -28,16 +28,16 @@
 
 struct fsl_e_tlb_entry tlb_table[] = {
 	/* TLB 0 - for temp stack in cache */
-	SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR, CFG_INIT_RAM_ADDR,
+	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR, CONFIG_SYS_INIT_RAM_ADDR,
 		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
 		      0, 0, BOOKE_PAGESZ_4K, 0),
-	SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR + 4 * 1024 , CFG_INIT_RAM_ADDR + 4 * 1024,
+	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024 , CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024,
 		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
 		      0, 0, BOOKE_PAGESZ_4K, 0),
-	SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR + 8 * 1024 , CFG_INIT_RAM_ADDR + 8 * 1024,
+	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024 , CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024,
 		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
 		      0, 0, BOOKE_PAGESZ_4K, 0),
-	SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR + 12 * 1024 , CFG_INIT_RAM_ADDR + 12 * 1024,
+	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024 , CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024,
 		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
 		      0, 0, BOOKE_PAGESZ_4K, 0),
 
@@ -46,7 +46,7 @@ struct fsl_e_tlb_entry tlb_table[] = {
 	 * 0xfc000000	6M4	FLASH
 	 * Out of reset this entry is only 4K.
 	 */
-	SET_TLB_ENTRY(1, CFG_FLASH_BASE, CFG_FLASH_BASE,
+	SET_TLB_ENTRY(1, CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE,
 		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 		      0, 0, BOOKE_PAGESZ_64M, 1),
 
@@ -54,7 +54,7 @@ struct fsl_e_tlb_entry tlb_table[] = {
 	 * TLB 1:	256M	Non-cacheable, guarded
 	 * 0x80000000	256M	PCI1 MEM First half
 	 */
-	SET_TLB_ENTRY(1, CFG_PCI1_MEM_PHYS, CFG_PCI1_MEM_PHYS,
+	SET_TLB_ENTRY(1, CONFIG_SYS_PCI1_MEM_PHYS, CONFIG_SYS_PCI1_MEM_PHYS,
 		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 		      0, 1, BOOKE_PAGESZ_256M, 1),
 
@@ -62,7 +62,7 @@ struct fsl_e_tlb_entry tlb_table[] = {
 	 * TLB 2:	256M	Non-cacheable, guarded
 	 * 0x90000000	256M	PCI1 MEM Second half
 	 */
-	SET_TLB_ENTRY(1, CFG_PCI1_MEM_PHYS + 0x10000000, CFG_PCI1_MEM_PHYS + 0x10000000,
+	SET_TLB_ENTRY(1, CONFIG_SYS_PCI1_MEM_PHYS + 0x10000000, CONFIG_SYS_PCI1_MEM_PHYS + 0x10000000,
 		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 		      0, 2, BOOKE_PAGESZ_256M, 1),
 
@@ -70,7 +70,7 @@ struct fsl_e_tlb_entry tlb_table[] = {
 	 * TLB 3:	256M	Non-cacheable, guarded
 	 * 0xa0000000	256M	PCI2 MEM First half
 	 */
-	SET_TLB_ENTRY(1, CFG_PCI2_MEM_PHYS, CFG_PCI2_MEM_PHYS,
+	SET_TLB_ENTRY(1, CONFIG_SYS_PCI2_MEM_PHYS, CONFIG_SYS_PCI2_MEM_PHYS,
 		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 		      0, 3, BOOKE_PAGESZ_256M, 1),
 
@@ -78,7 +78,7 @@ struct fsl_e_tlb_entry tlb_table[] = {
 	 * TLB 4:	256M	Non-cacheable, guarded
 	 * 0xb0000000	256M	PCI2 MEM Second half
 	 */
-	SET_TLB_ENTRY(1, CFG_PCI2_MEM_PHYS + 0x10000000, CFG_PCI2_MEM_PHYS + 0x10000000,
+	SET_TLB_ENTRY(1, CONFIG_SYS_PCI2_MEM_PHYS + 0x10000000, CONFIG_SYS_PCI2_MEM_PHYS + 0x10000000,
 		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 		      0, 4, BOOKE_PAGESZ_256M, 1),
 
@@ -88,7 +88,7 @@ struct fsl_e_tlb_entry tlb_table[] = {
 	 * 0xe200_0000	16M	PCI1 IO
 	 * 0xe300_0000	16M	PCI2 IO
 	 */
-	SET_TLB_ENTRY(1, CFG_CCSRBAR, CFG_CCSRBAR_PHYS,
+	SET_TLB_ENTRY(1, CONFIG_SYS_CCSRBAR, CONFIG_SYS_CCSRBAR_PHYS,
 		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 		      0, 5, BOOKE_PAGESZ_64M, 1),
 
@@ -98,7 +98,7 @@ struct fsl_e_tlb_entry tlb_table[] = {
 	 * 0xfb000000		Configuration Latch register (one word)
 	 * 0xfc000000		Up to 64M flash
 	 */
-	SET_TLB_ENTRY(1, CFG_LBC_OPTION_BASE, CFG_LBC_OPTION_BASE,
+	SET_TLB_ENTRY(1, CONFIG_SYS_LBC_OPTION_BASE, CONFIG_SYS_LBC_OPTION_BASE,
 		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 		      0, 7, BOOKE_PAGESZ_256M, 1),
 };
diff --git a/board/stxssa/u-boot.lds b/board/stxssa/u-boot.lds
index 93bedda66..6ee8d60ec 100644
--- a/board/stxssa/u-boot.lds
+++ b/board/stxssa/u-boot.lds
@@ -149,6 +149,7 @@ SECTIONS
    *(.dynbss)
    *(.bss)
    *(COMMON)
+   . = ALIGN(4);
   }
   _end = . ;
   PROVIDE (end = .);
diff --git a/board/stxxtc/stxxtc.c b/board/stxxtc/stxxtc.c
index a75037439..a1a36c493 100644
--- a/board/stxxtc/stxxtc.c
+++ b/board/stxxtc/stxxtc.c
@@ -349,7 +349,7 @@ static const uint nandcs_table[0x40] = {
 #define MAR_SDRAM_INIT		((CAS_LATENCY << 6) | 0x00000008LU)
 
 /* 9 */
-#define CFG_MAMR	((CFG_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
+#define CONFIG_SYS_MAMR	((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
 			 MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 |	\
 			 MAMR_RLFA_1X	 | MAMR_WLFA_1X	   | MAMR_TLFA_4X)
 
@@ -401,7 +401,7 @@ void check_ram(unsigned int addr, unsigned int size)
 
 phys_size_t initdram(int board_type)
 {
-	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
 	volatile memctl8xx_t *memctl = &immap->im_memctl;
 	long int size;
 	u32 d1, d2;
@@ -418,10 +418,10 @@ phys_size_t initdram(int board_type)
 	/*
 	 * Map controller bank 3 to the SDRAM bank at preliminary address.
 	 */
-	memctl->memc_or4 = CFG_OR4_PRELIM;
-	memctl->memc_br4 = CFG_BR4_PRELIM;
+	memctl->memc_or4 = CONFIG_SYS_OR4_PRELIM;
+	memctl->memc_br4 = CONFIG_SYS_BR4_PRELIM;
 
-	memctl->memc_mamr = CFG_MAMR & ~MAMR_PTAE;	/* no refresh yet */
+	memctl->memc_mamr = CONFIG_SYS_MAMR & ~MAMR_PTAE;	/* no refresh yet */
 
 	udelay(200);
 
@@ -529,7 +529,7 @@ void reset_phys(void)
 
 int board_early_init_f(void)
 {
-	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
 	volatile iop8xx_t *ioport = &immap->im_ioport;
 	volatile cpm8xx_t *cpm = &immap->im_cpm;
 	volatile memctl8xx_t *memctl = &immap->im_memctl;
@@ -579,13 +579,13 @@ int board_early_init_f(void)
 #include <linux/mtd/nand_legacy.h>
 
 extern ulong nand_probe(ulong physadr);
-extern struct nand_chip nand_dev_desc[CFG_MAX_NAND_DEVICE];
+extern struct nand_chip nand_dev_desc[CONFIG_SYS_MAX_NAND_DEVICE];
 
 void nand_init(void)
 {
 	unsigned long totlen;
 
-	totlen = nand_probe(CFG_NAND_BASE);
+	totlen = nand_probe(CONFIG_SYS_NAND_BASE);
 	printf ("%4lu MB\n", totlen >> 20);
 }
 #endif
@@ -599,21 +599,7 @@ void hw_watchdog_reset(void)
 
 #endif
 
-#ifdef CONFIG_SHOW_ACTIVITY
-
-/* called from timer interrupt every 1/CFG_HZ sec */
-void board_show_activity(ulong timestamp)
-{
-}
-
-/* called when looping */
-void show_activity(int arg)
-{
-}
-
-#endif
-
-#if defined(CFG_CONSOLE_IS_IN_ENV) && defined(CFG_CONSOLE_OVERWRITE_ROUTINE)
+#if defined(CONFIG_SYS_CONSOLE_IS_IN_ENV) && defined(CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE)
 int overwrite_console(void)
 {
 	/* printf("overwrite_console called\n"); */
diff --git a/board/stxxtc/u-boot.lds b/board/stxxtc/u-boot.lds
index f560189c0..4966f4d4d 100644
--- a/board/stxxtc/u-boot.lds
+++ b/board/stxxtc/u-boot.lds
@@ -63,7 +63,7 @@ SECTIONS
     lib_ppc/time.o		(.text)
 
     . = DEFINED(env_offset) ? env_offset : .;
-    common/environment.o	(.text)
+    common/env_embedded.o	(.text)
 
     *(.text)
     *(.fixup)
@@ -134,6 +134,7 @@ SECTIONS
    *(.dynbss)
    *(.bss)
    *(COMMON)
+   . = ALIGN(4);
   }
   _end = . ;
   PROVIDE (end = .);
diff --git a/board/stxxtc/u-boot.lds.debug b/board/stxxtc/u-boot.lds.debug
index 5bf1a6628..d47c4082a 100644
--- a/board/stxxtc/u-boot.lds.debug
+++ b/board/stxxtc/u-boot.lds.debug
@@ -61,7 +61,7 @@ SECTIONS
     lib_generic/crc32.o		(.text)
 
     . = env_offset;
-    common/environment.o(.text)
+    common/env_embedded.o(.text)
 
     *(.text)
     *(.fixup)
diff --git a/board/svm_sc8xx/flash.c b/board/svm_sc8xx/flash.c
index 25e61dd5e..db1f21a58 100644
--- a/board/svm_sc8xx/flash.c
+++ b/board/svm_sc8xx/flash.c
@@ -23,11 +23,11 @@
 #include <common.h>
 #include <mpc8xx.h>
 
-#ifndef	CFG_ENV_ADDR
-#define CFG_ENV_ADDR	(CFG_FLASH_BASE + CFG_ENV_OFFSET)
+#ifndef	CONFIG_ENV_ADDR
+#define CONFIG_ENV_ADDR	(CONFIG_SYS_FLASH_BASE + CONFIG_ENV_OFFSET)
 #endif
 
-flash_info_t	flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips	*/
+flash_info_t	flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips	*/
 
 /*-----------------------------------------------------------------------
  * Functions
@@ -54,7 +54,7 @@ static  void my_out_be32( unsigned *addr, int val);
 
 unsigned long flash_init (void)
 {
-	volatile immap_t     *immap  = (immap_t *)CFG_IMMR;
+	volatile immap_t     *immap  = (immap_t *)CONFIG_SYS_IMMR;
 	volatile memctl8xx_t *memctl = &immap->im_memctl;
 	unsigned long size_b0, size_b1;
 	int i;
@@ -62,16 +62,16 @@ unsigned long flash_init (void)
 	size_b0=0;
 	size_b1=0;
 	/* Init: no FLASHes known */
-	for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) {
+	for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
 		flash_info[i].flash_id = FLASH_UNKNOWN;
 	}
-#ifdef CFG_DOC_BASE
+#ifdef CONFIG_SYS_DOC_BASE
 #ifndef CONFIG_FEL8xx_AT
-	memctl->memc_or5 = (0xffff8000 | CFG_OR_TIMING_DOC ); /* 32k bytes */
-	memctl->memc_br5 = CFG_DOC_BASE | 0x401;
+	memctl->memc_or5 = (0xffff8000 | CONFIG_SYS_OR_TIMING_DOC ); /* 32k bytes */
+	memctl->memc_br5 = CONFIG_SYS_DOC_BASE | 0x401;
 #else
-	memctl->memc_or3 = (0xffff8000 | CFG_OR_TIMING_DOC ); /* 32k bytes */
-	memctl->memc_br3 = CFG_DOC_BASE | 0x401;
+	memctl->memc_or3 = (0xffff8000 | CONFIG_SYS_OR_TIMING_DOC ); /* 32k bytes */
+	memctl->memc_br3 = CONFIG_SYS_DOC_BASE | 0x401;
 #endif
 #endif
 #if defined( CONFIG_BOOT_8B)
@@ -136,54 +136,54 @@ unsigned long flash_init (void)
 	}
 
 	/* Remap FLASH according to real size */
-	memctl->memc_or0 = CFG_OR_TIMING_FLASH | (-size_b0 & OR_AM_MSK);
-	memctl->memc_br0 = (CFG_FLASH_BASE & BR_BA_MSK) | BR_MS_GPCM | BR_V;
+	memctl->memc_or0 = CONFIG_SYS_OR_TIMING_FLASH | (-size_b0 & OR_AM_MSK);
+	memctl->memc_br0 = (CONFIG_SYS_FLASH_BASE & BR_BA_MSK) | BR_MS_GPCM | BR_V;
 
 	/* Re-do sizing to get full correct info */
-	size_b0 = flash_get_size((vu_long *)CFG_FLASH_BASE, &flash_info[0]);
+	size_b0 = flash_get_size((vu_long *)CONFIG_SYS_FLASH_BASE, &flash_info[0]);
 
-	flash_get_offsets (CFG_FLASH_BASE, &flash_info[0]);
+	flash_get_offsets (CONFIG_SYS_FLASH_BASE, &flash_info[0]);
 
-#if CFG_MONITOR_BASE >= CFG_FLASH_BASE
+#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE
 	/* monitor protection ON by default */
 	flash_protect(FLAG_PROTECT_SET,
-		      CFG_MONITOR_BASE,
-		      CFG_MONITOR_BASE+monitor_flash_len-1,
+		      CONFIG_SYS_MONITOR_BASE,
+		      CONFIG_SYS_MONITOR_BASE+monitor_flash_len-1,
 		      &flash_info[0]);
 #endif
 
-#ifdef	CFG_ENV_IS_IN_FLASH
+#ifdef	CONFIG_ENV_IS_IN_FLASH
 	/* ENV protection ON by default */
 	flash_protect(FLAG_PROTECT_SET,
-		      CFG_ENV_ADDR,
-		      CFG_ENV_ADDR+CFG_ENV_SIZE-1,
+		      CONFIG_ENV_ADDR,
+		      CONFIG_ENV_ADDR+CONFIG_ENV_SIZE-1,
 		      &flash_info[0]);
 #endif
 
 	if (size_b1) {
-		memctl->memc_or1 = CFG_OR_TIMING_FLASH | (-size_b1 & 0xFFFF8000);
-		memctl->memc_br1 = ((CFG_FLASH_BASE + size_b0) & BR_BA_MSK) |
+		memctl->memc_or1 = CONFIG_SYS_OR_TIMING_FLASH | (-size_b1 & 0xFFFF8000);
+		memctl->memc_br1 = ((CONFIG_SYS_FLASH_BASE + size_b0) & BR_BA_MSK) |
 				    BR_MS_GPCM | BR_V;
 
 		/* Re-do sizing to get full correct info */
-		size_b1 = flash_get_size((vu_long *)(CFG_FLASH_BASE + size_b0),
+		size_b1 = flash_get_size((vu_long *)(CONFIG_SYS_FLASH_BASE + size_b0),
 					  &flash_info[1]);
 
-		flash_get_offsets (CFG_FLASH_BASE + size_b0, &flash_info[1]);
+		flash_get_offsets (CONFIG_SYS_FLASH_BASE + size_b0, &flash_info[1]);
 
-#if CFG_MONITOR_BASE >= CFG_FLASH_BASE
+#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE
 		/* monitor protection ON by default */
 		flash_protect(FLAG_PROTECT_SET,
-			      CFG_MONITOR_BASE,
-			      CFG_MONITOR_BASE+monitor_flash_len-1,
+			      CONFIG_SYS_MONITOR_BASE,
+			      CONFIG_SYS_MONITOR_BASE+monitor_flash_len-1,
 			      &flash_info[1]);
 #endif
 
-#ifdef	CFG_ENV_IS_IN_FLASH
+#ifdef	CONFIG_ENV_IS_IN_FLASH
 		/* ENV protection ON by default */
 		flash_protect(FLAG_PROTECT_SET,
-			      CFG_ENV_ADDR,
-			      CFG_ENV_ADDR+CFG_ENV_SIZE-1,
+			      CONFIG_ENV_ADDR,
+			      CONFIG_ENV_ADDR+CONFIG_ENV_SIZE-1,
 			      &flash_info[1]);
 #endif
 	} else {
@@ -561,7 +561,7 @@ int	flash_erase (flash_info_t *info, int s_first, int s_last)
 # error CONFIG_BOOT_(size)B missing.
 #endif
 	{
-		if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+		if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
 			printf ("Timeout\n");
 			return 1;
 		}
@@ -710,7 +710,7 @@ static int write_word (flash_info_t *info, ulong dest, ulong data)
 	  start = get_timer (0);
 	last  = start;
 	  while(  ( my_in_8((unsigned char *) (dest+i)) ) != ( data_ch[i]  ) ) {
-		  if (get_timer(start) > CFG_FLASH_WRITE_TOUT ) {
+		  if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT ) {
 			  return 1;
 		  }
 	  }
@@ -730,7 +730,7 @@ static int write_word (flash_info_t *info, ulong dest, ulong data)
 	  start = get_timer (0);
 	last  = start;
 	  while(  ( my_in_be16((unsigned short *) (dest+(i*2))) ) != ( data_short[i]  ) ) {
-		  if (get_timer(start) > CFG_FLASH_WRITE_TOUT ) {
+		  if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT ) {
 			  return 1;
 		  }
 	  }
@@ -749,7 +749,7 @@ static int write_word (flash_info_t *info, ulong dest, ulong data)
 	/* data polling for D7 */
 	start = get_timer (0);
 	while ((*((vu_long *)dest) & 0x00800080) != (data & 0x00800080)) {
-		if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+		if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
 			return (1);
 		}
 	}
diff --git a/board/svm_sc8xx/svm_sc8xx.c b/board/svm_sc8xx/svm_sc8xx.c
index 06fb18b34..4390e49dd 100644
--- a/board/svm_sc8xx/svm_sc8xx.c
+++ b/board/svm_sc8xx/svm_sc8xx.c
@@ -102,15 +102,15 @@ int checkboard (void)
 
 phys_size_t initdram (int board_type)
 {
-	volatile immap_t     *immap  = (immap_t *)CFG_IMMR;
+	volatile immap_t     *immap  = (immap_t *)CONFIG_SYS_IMMR;
 	volatile memctl8xx_t *memctl = &immap->im_memctl;
 	long int size_b0 = 0;
 
 	upmconfig(UPMA, (uint *)sdram_table, sizeof(sdram_table)/sizeof(uint));
 
-	memctl->memc_mptpr = CFG_MPTPR;
+	memctl->memc_mptpr = CONFIG_SYS_MPTPR;
 #if defined (CONFIG_SDRAM_16M)
-	memctl->memc_mamr = 0x00802114 | CFG_MxMR_PTx;
+	memctl->memc_mamr = 0x00802114 | CONFIG_SYS_MxMR_PTx;
 	memctl->memc_mcr  = 0x80002105;     /* SDRAM bank 0 */
 	udelay(1);
 	memctl->memc_mcr  = 0x80002830;
@@ -122,7 +122,7 @@ phys_size_t initdram (int board_type)
 	memctl->memc_or1 =  0xff000a00;
 	size_b0 = 0x01000000;
 #elif defined (CONFIG_SDRAM_32M)
-	memctl->memc_mamr = 0x00904114 | CFG_MxMR_PTx;
+	memctl->memc_mamr = 0x00904114 | CONFIG_SYS_MxMR_PTx;
 	memctl->memc_mcr  = 0x80002105;     /* SDRAM bank 0 */
 	udelay(1);
 	memctl->memc_mcr  = 0x80002830;
@@ -134,7 +134,7 @@ phys_size_t initdram (int board_type)
 	memctl->memc_or1 =  0xfe000a00;
 	size_b0 = 0x02000000;
 #elif defined (CONFIG_SDRAM_64M)
-	memctl->memc_mamr = 0x00a04114 | CFG_MxMR_PTx;
+	memctl->memc_mamr = 0x00a04114 | CONFIG_SYS_MxMR_PTx;
 	memctl->memc_mcr  = 0x80002105;     /* SDRAM bank 0 */
 	udelay(1);
 	memctl->memc_mcr  = 0x80002830;
@@ -154,9 +154,8 @@ phys_size_t initdram (int board_type)
 }
 
 #if defined(CONFIG_CMD_DOC)
-extern void doc_probe (ulong physadr);
 void doc_init (void)
 {
-	        doc_probe (CFG_DOC_BASE);
+	        doc_probe (CONFIG_SYS_DOC_BASE);
 }
 #endif
diff --git a/board/svm_sc8xx/u-boot.lds b/board/svm_sc8xx/u-boot.lds
index 14ff17987..ceab4d29d 100644
--- a/board/svm_sc8xx/u-boot.lds
+++ b/board/svm_sc8xx/u-boot.lds
@@ -66,7 +66,7 @@ SECTIONS
     lib_ppc/time.o		(.text)
 
     . = env_offset;
-    common/environment.o	(.ppcenv)
+    common/env_embedded.o	(.ppcenv)
 
     *(.text)
     *(.fixup)
@@ -138,6 +138,7 @@ SECTIONS
    *(.dynbss)
    *(.bss)
    *(COMMON)
+   . = ALIGN(4);
   }
   _end = . ;
   PROVIDE (end = .);
diff --git a/board/svm_sc8xx/u-boot.lds.debug b/board/svm_sc8xx/u-boot.lds.debug
index 0cd053a8b..016048dae 100644
--- a/board/svm_sc8xx/u-boot.lds.debug
+++ b/board/svm_sc8xx/u-boot.lds.debug
@@ -61,7 +61,7 @@ SECTIONS
     lib_generic/crc32.o		(.text)
 
     . = env_offset;
-    common/environment.o(.text)
+    common/env_embedded.o(.text)
 
     *(.text)
     *(.fixup)
diff --git a/board/sx1/u-boot.lds b/board/sx1/u-boot.lds
index b608223a7..9a9dd2106 100644
--- a/board/sx1/u-boot.lds
+++ b/board/sx1/u-boot.lds
@@ -52,6 +52,6 @@ SECTIONS
 
 	. = ALIGN(4);
 	__bss_start = .;
-	.bss (NOLOAD) : { *(.bss) }
+	.bss (NOLOAD) : { *(.bss) . = ALIGN(4); }
 	_end = .;
 }
diff --git a/board/tb0229/flash.c b/board/tb0229/flash.c
index e9f6418c4..933d5ecc8 100644
--- a/board/tb0229/flash.c
+++ b/board/tb0229/flash.c
@@ -27,10 +27,10 @@
 #include <ppc4xx.h>
 #include <asm/processor.h>
 
-flash_info_t flash_info[CFG_MAX_FLASH_BANKS];	/* info for FLASH chips        */
+flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];	/* info for FLASH chips        */
 
 
-#ifdef CFG_FLASH_16BIT
+#ifdef CONFIG_SYS_FLASH_16BIT
 #define FLASH_WORD_SIZE	unsigned short
 #define	FLASH_ID_MASK	0xFFFF
 #else
@@ -44,7 +44,7 @@ flash_info_t flash_info[CFG_MAX_FLASH_BANKS];	/* info for FLASH chips        */
 /* stolen from esteem192e/flash.c */
 ulong flash_get_size (volatile FLASH_WORD_SIZE * addr, flash_info_t * info);
 
-#ifndef CFG_FLASH_16BIT
+#ifndef CONFIG_SYS_FLASH_16BIT
 static int write_word (flash_info_t * info, ulong dest, ulong data);
 #else
 static int write_short (flash_info_t * info, ulong dest, ushort data);
@@ -63,14 +63,14 @@ unsigned long flash_init (void)
 	unsigned long base_b0, base_b1;
 
 	/* Init: no FLASHes known */
-	for (i = 0; i < CFG_MAX_FLASH_BANKS; ++i) {
+	for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
 		flash_info[i].flash_id = FLASH_UNKNOWN;
 	}
 
 	/* Static FLASH Bank configuration here - FIXME XXX */
 
 	size_b0 =
-		flash_get_size ((volatile FLASH_WORD_SIZE *) CFG_FLASH_BASE,
+		flash_get_size ((volatile FLASH_WORD_SIZE *) CONFIG_SYS_FLASH_BASE,
 				&flash_info[0]);
 
 	if (flash_info[0].flash_id == FLASH_UNKNOWN) {
@@ -78,9 +78,9 @@ unsigned long flash_init (void)
 	}
 
 	/* Only one bank */
-	if (CFG_MAX_FLASH_BANKS == 1) {
+	if (CONFIG_SYS_MAX_FLASH_BANKS == 1) {
 		/* Setup offsets */
-		flash_get_offsets (CFG_FLASH_BASE, &flash_info[0]);
+		flash_get_offsets (CONFIG_SYS_FLASH_BASE, &flash_info[0]);
 
 		/* Monitor protection ON by default */
 #if 0				/* sand: */
@@ -91,19 +91,19 @@ unsigned long flash_init (void)
 				      &flash_info[0]);
 #else
 		(void) flash_protect (FLAG_PROTECT_SET,
-				      CFG_MONITOR_BASE,
-				      CFG_MONITOR_BASE + monitor_flash_len -
+				      CONFIG_SYS_MONITOR_BASE,
+				      CONFIG_SYS_MONITOR_BASE + monitor_flash_len -
 				      1, &flash_info[0]);
 #endif
 		size_b1 = 0;
 		flash_info[0].size = size_b0;
 	}
-#ifdef CFG_FLASH_BASE_2
+#ifdef CONFIG_SYS_FLASH_BASE_2
 	/* 2 banks */
 	else {
 		size_b1 =
 			flash_get_size ((volatile FLASH_WORD_SIZE *)
-					CFG_FLASH_BASE_2, &flash_info[1]);
+					CONFIG_SYS_FLASH_BASE_2, &flash_info[1]);
 
 		/* Re-do sizing to get full correct info */
 
@@ -144,8 +144,8 @@ unsigned long flash_init (void)
 				      &flash_info[0]);
 #else
 		(void) flash_protect (FLAG_PROTECT_SET,
-				      CFG_MONITOR_BASE,
-				      CFG_MONITOR_BASE + monitor_flash_len -
+				      CONFIG_SYS_MONITOR_BASE,
+				      CONFIG_SYS_MONITOR_BASE + monitor_flash_len -
 				      1, &flash_info[0]);
 #endif
 
@@ -200,7 +200,7 @@ static void flash_get_offsets (ulong base, flash_info_t * info)
 	} else if (info->flash_id & FLASH_BTYPE) {
 		if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL) {
 
-#ifndef CFG_FLASH_16BIT
+#ifndef CONFIG_SYS_FLASH_16BIT
 			/* set sector offsets for bottom boot block type        */
 			info->start[0] = base + 0x00000000;
 			info->start[1] = base + 0x00004000;
@@ -256,7 +256,7 @@ static void flash_get_offsets (ulong base, flash_info_t * info)
 		i = info->sector_count - 1;
 		if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL) {
 
-#ifndef CFG_FLASH_16BIT
+#ifndef CONFIG_SYS_FLASH_16BIT
 			info->start[i--] = base + info->size - 0x00004000;
 			info->start[i--] = base + info->size - 0x00008000;
 			info->start[i--] = base + info->size - 0x0000C000;
@@ -448,7 +448,7 @@ ulong flash_get_size (volatile FLASH_WORD_SIZE * addr, flash_info_t * info)
 	/* Write auto select command: read Manufacturer ID */
 
 
-#ifndef CFG_FLASH_16BIT
+#ifndef CONFIG_SYS_FLASH_16BIT
 
 	/*
 	 * Note: if it is an AMD flash and the word at addr[0000]
@@ -699,7 +699,7 @@ int flash_erase (flash_info_t * info, int s_first, int s_last)
 	/* Disable interrupts which might cause a timeout here */
 	flag = disable_interrupts ();
 	if (info->flash_id < FLASH_AMD_COMP) {
-#ifndef CFG_FLASH_16BIT
+#ifndef CONFIG_SYS_FLASH_16BIT
 		addr[0x0555] = 0x00AA00AA;
 		addr[0x02AA] = 0x00550055;
 		addr[0x0555] = 0x00800080;
@@ -741,7 +741,7 @@ int flash_erase (flash_info_t * info, int s_first, int s_last)
 		addr = (volatile FLASH_WORD_SIZE *) (info->start[l_sect]);
 		while ((addr[0] & (0x00800080 & FLASH_ID_MASK)) !=
 		       (0x00800080 & FLASH_ID_MASK)) {
-			if ((now = get_timer (start)) > CFG_FLASH_ERASE_TOUT) {
+			if ((now = get_timer (start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
 				printf ("Timeout\n");
 				return 1;
 			}
@@ -762,7 +762,7 @@ int flash_erase (flash_info_t * info, int s_first, int s_last)
 		for (sect = s_first; sect <= s_last; sect++) {
 			if (info->protect[sect] == 0) {	/* not protected */
 				barf = 0;
-#ifndef CFG_FLASH_16BIT
+#ifndef CONFIG_SYS_FLASH_16BIT
 				addr = (vu_long *) (info->start[sect]);
 				addr[0] = 0x00500050;
 				addr[0] = 0x00200020;
@@ -801,7 +801,7 @@ int flash_erase (flash_info_t * info, int s_first, int s_last)
 				l_sect = sect;
 			}
 			addr = (volatile FLASH_WORD_SIZE *) info->start[0];
-#ifndef CFG_FLASH_16BIT
+#ifndef CONFIG_SYS_FLASH_16BIT
 			addr[0] = (0x00FF00FF & FLASH_ID_MASK);	/* reset bank */
 #else
 			addr[0] = (0x00FF & FLASH_ID_MASK);	/* reset bank */
@@ -821,7 +821,7 @@ int flash_erase (flash_info_t * info, int s_first, int s_last)
 	flash_info_t *info;
 	int i;
 
-	for (i=0, info=&flash_info[0]; i<CFG_MAX_FLASH_BANKS; ++i, ++info) {
+	for (i=0, info=&flash_info[0]; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i, ++info) {
 		if ((addr >= info->start[0]) &&
 		    (addr < (info->start[0] + info->size)) ) {
 			return (info);
@@ -898,7 +898,7 @@ int flash_erase (flash_info_t * info, int s_first, int s_last)
 
 int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
 {
-#ifndef CFG_FLASH_16BIT
+#ifndef CONFIG_SYS_FLASH_16BIT
 	ulong cp, wp, data;
 	int l;
 #else
@@ -907,7 +907,7 @@ int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
 #endif
 	int i, rc;
 
-#ifndef CFG_FLASH_16BIT
+#ifndef CONFIG_SYS_FLASH_16BIT
 
 
 	wp = (addr & ~3);	/* get lower word aligned address */
@@ -1034,7 +1034,7 @@ int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
  * 1 - write timeout
  * 2 - Flash not erased
  */
-#ifndef CFG_FLASH_16BIT
+#ifndef CONFIG_SYS_FLASH_16BIT
 static int write_word (flash_info_t * info, ulong dest, ulong data)
 {
 	vu_long *addr = (vu_long *) (info->start[0]);
@@ -1076,7 +1076,7 @@ static int write_word (flash_info_t * info, ulong dest, ulong data)
 
 		while ((*((vu_long *) dest) & 0x00800080) !=
 		       (data & 0x00800080)) {
-			if (get_timer (start) > CFG_FLASH_WRITE_TOUT) {
+			if (get_timer (start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
 				printf ("timeout\n");
 				return (1);
 			}
@@ -1085,7 +1085,7 @@ static int write_word (flash_info_t * info, ulong dest, ulong data)
 	} else {
 
 		while (!(addr[0] & 0x00800080)) {	/* wait for error or finish */
-			if (get_timer (start) > CFG_FLASH_WRITE_TOUT) {
+			if (get_timer (start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
 				printf ("timeout\n");
 				return (1);
 			}
@@ -1157,7 +1157,7 @@ static int write_short (flash_info_t * info, ulong dest, ushort data)
 	if (info->flash_id < FLASH_AMD_COMP) {
 		/* AMD stuff */
 		while ((*((vu_short *) dest) & 0x0080) != (data & 0x0080)) {
-			if (get_timer (start) > CFG_FLASH_WRITE_TOUT) {
+			if (get_timer (start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
 				return (1);
 			}
 		}
@@ -1165,7 +1165,7 @@ static int write_short (flash_info_t * info, ulong dest, ushort data)
 	} else {
 		/* intel stuff */
 		while (!(addr[0] & 0x0080)) {	/* wait for error or finish */
-			if (get_timer (start) > CFG_FLASH_WRITE_TOUT)
+			if (get_timer (start) > CONFIG_SYS_FLASH_WRITE_TOUT)
 				return (1);
 		}
 
@@ -1184,7 +1184,7 @@ static int write_short (flash_info_t * info, ulong dest, ushort data)
 		*addr = 0x00B0;
 		*addr = 0x0070;
 		while (!(addr[0] & 0x0080)) {	/* wait for error or finish */
-			if (get_timer (start) > CFG_FLASH_WRITE_TOUT)
+			if (get_timer (start) > CONFIG_SYS_FLASH_WRITE_TOUT)
 				return (1);
 		}
 
diff --git a/board/tb0229/tb0229.c b/board/tb0229/tb0229.c
index 921bd3adc..d3f05b273 100644
--- a/board/tb0229/tb0229.c
+++ b/board/tb0229/tb0229.c
@@ -34,7 +34,7 @@ void pci_init_board (void)
 
 phys_size_t initdram(int board_type)
 {
-	return get_ram_size (CFG_SDRAM_BASE, 0x8000000);
+	return get_ram_size (CONFIG_SYS_SDRAM_BASE, 0x8000000);
 }
 
 int checkboard (void)
@@ -46,3 +46,8 @@ int checkboard (void)
 
 	return 0;
 }
+
+int board_eth_init(bd_t *bis)
+{
+	return pci_eth_init(bis);
+}
diff --git a/board/tb0229/u-boot.lds b/board/tb0229/u-boot.lds
index b18e6a6fc..086d74d32 100644
--- a/board/tb0229/u-boot.lds
+++ b/board/tb0229/u-boot.lds
@@ -65,6 +65,6 @@ SECTIONS
 
 	. = ALIGN(4);
 	.sbss (NOLOAD)  : { *(.sbss) }
-	.bss (NOLOAD)  : { *(.bss) }
+	.bss (NOLOAD)  : { *(.bss) . = ALIGN(4); }
 	uboot_end = .;
 }
diff --git a/board/total5200/sdram.c b/board/total5200/sdram.c
index a1601f274..dc4c6f18c 100644
--- a/board/total5200/sdram.c
+++ b/board/total5200/sdram.c
@@ -29,7 +29,7 @@
 
 #include "sdram.h"
 
-#ifndef CFG_RAMBOOT
+#ifndef CONFIG_SYS_RAMBOOT
 static void mpc5xxx_sdram_start (sdram_conf_t *sdram_conf, int hi_addr)
 {
 	long hi_addr_bit = hi_addr ? 0x01000000 : 0;
@@ -72,7 +72,7 @@ static void mpc5xxx_sdram_start (sdram_conf_t *sdram_conf, int hi_addr)
 
 /*
  * ATTENTION: Although partially referenced initdram does NOT make real use
- *            use of CFG_SDRAM_BASE. The code does not work if CFG_SDRAM_BASE
+ *            use of CONFIG_SYS_SDRAM_BASE. The code does not work if CONFIG_SYS_SDRAM_BASE
  *            is something else than 0x00000000.
  */
 
@@ -81,7 +81,7 @@ long int mpc5xxx_sdram_init (sdram_conf_t *sdram_conf)
 {
 	ulong dramsize = 0;
 	ulong dramsize2 = 0;
-#ifndef CFG_RAMBOOT
+#ifndef CONFIG_SYS_RAMBOOT
 	ulong test1, test2;
 
 	/* setup SDRAM chip selects */
@@ -102,9 +102,9 @@ long int mpc5xxx_sdram_init (sdram_conf_t *sdram_conf)
 
 	/* find RAM size using SDRAM CS0 only */
 	mpc5xxx_sdram_start(sdram_conf, 0);
-	test1 = get_ram_size((long *)CFG_SDRAM_BASE, 0x80000000);
+	test1 = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE, 0x80000000);
 	mpc5xxx_sdram_start(sdram_conf, 1);
-	test2 = get_ram_size((long *)CFG_SDRAM_BASE, 0x80000000);
+	test2 = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE, 0x80000000);
 	if (test1 > test2) {
 		mpc5xxx_sdram_start(sdram_conf, 0);
 		dramsize = test1;
@@ -129,9 +129,9 @@ long int mpc5xxx_sdram_init (sdram_conf_t *sdram_conf)
 
 	/* find RAM size using SDRAM CS1 only */
 	mpc5xxx_sdram_start(sdram_conf, 0);
-	test1 = get_ram_size((long *)(CFG_SDRAM_BASE + dramsize), 0x80000000);
+	test1 = get_ram_size((long *)(CONFIG_SYS_SDRAM_BASE + dramsize), 0x80000000);
 	mpc5xxx_sdram_start(sdram_conf, 1);
-	test2 = get_ram_size((long *)(CFG_SDRAM_BASE + dramsize), 0x80000000);
+	test2 = get_ram_size((long *)(CONFIG_SYS_SDRAM_BASE + dramsize), 0x80000000);
 	if (test1 > test2) {
 		mpc5xxx_sdram_start(sdram_conf, 0);
 		dramsize2 = test1;
@@ -152,7 +152,7 @@ long int mpc5xxx_sdram_init (sdram_conf_t *sdram_conf)
 		*(vu_long *)MPC5XXX_SDRAM_CS1CFG = dramsize; /* disabled */
 	}
 
-#else /* CFG_RAMBOOT */
+#else /* CONFIG_SYS_RAMBOOT */
 
 	/* retrieve size of memory connected to SDRAM CS0 */
 	dramsize = *(vu_long *)MPC5XXX_SDRAM_CS0CFG & 0xFF;
@@ -170,7 +170,7 @@ long int mpc5xxx_sdram_init (sdram_conf_t *sdram_conf)
 		dramsize2 = 0;
 	}
 
-#endif /* CFG_RAMBOOT */
+#endif /* CONFIG_SYS_RAMBOOT */
 
 	return dramsize + dramsize2;
 }
@@ -180,7 +180,7 @@ long int mpc5xxx_sdram_init (sdram_conf_t *sdram_conf)
 long int mpc5xxx_sdram_init (sdram_conf_t *sdram_conf)
 {
 	ulong dramsize = 0;
-#ifndef CFG_RAMBOOT
+#ifndef CONFIG_SYS_RAMBOOT
 	ulong test1, test2;
 
 	/* setup and enable SDRAM chip selects */
@@ -199,9 +199,9 @@ long int mpc5xxx_sdram_init (sdram_conf_t *sdram_conf)
 
 	/* find RAM size */
 	mpc5xxx_sdram_start(sdram_conf, 0);
-	test1 = get_ram_size((long *)CFG_SDRAM_BASE, 0x80000000);
+	test1 = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE, 0x80000000);
 	mpc5xxx_sdram_start(sdram_conf, 1);
-	test2 = get_ram_size((long *)CFG_SDRAM_BASE, 0x80000000);
+	test2 = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE, 0x80000000);
 	if (test1 > test2) {
 		mpc5xxx_sdram_start(sdram_conf, 0);
 		dramsize = test1;
@@ -212,12 +212,12 @@ long int mpc5xxx_sdram_init (sdram_conf_t *sdram_conf)
 	/* set SDRAM end address according to size */
 	*(vu_long *)MPC5XXX_SDRAM_STOP = ((dramsize - 1) >> 15);
 
-#else /* CFG_RAMBOOT */
+#else /* CONFIG_SYS_RAMBOOT */
 
 	/* Retrieve amount of SDRAM available */
 	dramsize = ((*(vu_long *)MPC5XXX_SDRAM_STOP + 1) << 15);
 
-#endif /* CFG_RAMBOOT */
+#endif /* CONFIG_SYS_RAMBOOT */
 
 	return dramsize;
 }
diff --git a/board/total5200/total5200.c b/board/total5200/total5200.c
index 1ae24c4f3..c524d63f9 100644
--- a/board/total5200/total5200.c
+++ b/board/total5200/total5200.c
@@ -27,6 +27,7 @@
 #include <common.h>
 #include <mpc5xxx.h>
 #include <pci.h>
+#include <netdev.h>
 
 #include "sdram.h"
 
@@ -70,15 +71,15 @@ int checkboard (void)
 	/*
 	 * Retrieve FPGA Revision.
 	 */
-	printf ("(FPGA %08lX)\n", *(vu_long *) (CFG_FPGA_BASE + 0x400));
+	printf ("(FPGA %08lX)\n", *(vu_long *) (CONFIG_SYS_FPGA_BASE + 0x400));
 
 	/*
 	 * Take all peripherals in power-up mode.
 	 */
 #if CONFIG_TOTAL5200_REV==2
-	*(vu_char *) (CFG_CPLD_BASE + 0x46) = 0x70;
+	*(vu_char *) (CONFIG_SYS_CPLD_BASE + 0x46) = 0x70;
 #else
-	*(vu_long *) (CFG_CPLD_BASE + 0x400) = 0x70;
+	*(vu_long *) (CONFIG_SYS_CPLD_BASE + 0x400) = 0x70;
 #endif
 
 	return 0;
@@ -283,7 +284,7 @@ void video_get_info_str (int line_number, char *info)
 /* Returns  SED13806 base address. First thing called in the driver. */
 unsigned int board_video_init (void)
 {
-	return CFG_LCD_BASE;
+	return CONFIG_SYS_LCD_BASE;
 }
 
 /* Called after initializing the SED13806 and before clearing the screen. */
@@ -308,3 +309,9 @@ int board_get_height (void)
 }
 
 #endif /* CONFIG_VIDEO_SED13806 */
+
+int board_eth_init(bd_t *bis)
+{
+	cpu_eth_init(bis); /* Built in FEC comes first */
+	return pci_eth_init(bis);
+}
diff --git a/board/tqc/tqm5200/cam5200_flash.c b/board/tqc/tqm5200/cam5200_flash.c
index b3f095d80..124b47d22 100644
--- a/board/tqc/tqm5200/cam5200_flash.c
+++ b/board/tqc/tqm5200/cam5200_flash.c
@@ -35,7 +35,7 @@
 
 #define swap16(x) __swab16(x)
 
-flash_info_t flash_info[CFG_MAX_FLASH_BANKS];	/* info for FLASH chips */
+flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];	/* info for FLASH chips */
 
 /*
  * CAM5200 is a TQM5200B based board. Additionally it also features
@@ -51,15 +51,15 @@ flash_info_t flash_info[CFG_MAX_FLASH_BANKS];	/* info for FLASH chips */
  * 16 bit flash bank and two sets of routines *_32 and *_16 to handle
  * specifics of both flashes.
  */
-static unsigned long flash_addr_table[][CFG_MAX_FLASH_BANKS] = {
-	{CFG_BOOTCS_START, CFG_CS5_START | 1}
+static unsigned long flash_addr_table[][CONFIG_SYS_MAX_FLASH_BANKS] = {
+	{CONFIG_SYS_BOOTCS_START, CONFIG_SYS_CS5_START | 1}
 };
 
 /*-----------------------------------------------------------------------
  * Functions
  */
 static int write_word(flash_info_t * info, ulong dest, ulong data);
-#ifdef CFG_FLASH_2ND_16BIT_DEV
+#ifdef CONFIG_SYS_FLASH_2ND_16BIT_DEV
 static int write_word_32(flash_info_t * info, ulong dest, ulong data);
 static int write_word_16(flash_info_t * info, ulong dest, ulong data);
 static int flash_erase_32(flash_info_t * info, int s_first, int s_last);
@@ -145,7 +145,7 @@ void flash_print_info(flash_info_t * info)
 /*
  * The following code cannot be run from FLASH!
  */
-#ifdef CFG_FLASH_2ND_16BIT_DEV
+#ifdef CONFIG_SYS_FLASH_2ND_16BIT_DEV
 static ulong flash_get_size(vu_long * addr, flash_info_t * info)
 {
 
@@ -164,23 +164,23 @@ static ulong flash_get_size(vu_long * addr, flash_info_t * info)
 #endif
 {
 	short i;
-	CFG_FLASH_WORD_SIZE value;
+	CONFIG_SYS_FLASH_WORD_SIZE value;
 	ulong base = (ulong) addr;
-	volatile CFG_FLASH_WORD_SIZE *addr2 = (CFG_FLASH_WORD_SIZE *) addr;
+	volatile CONFIG_SYS_FLASH_WORD_SIZE *addr2 = (CONFIG_SYS_FLASH_WORD_SIZE *) addr;
 
 	DEBUGF("get_size32: FLASH ADDR: %08x\n", (unsigned)addr);
 
 	/* Write auto select command: read Manufacturer ID */
-	addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00AA00AA;
-	addr2[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x00550055;
-	addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00900090;
+	addr2[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00AA00AA;
+	addr2[CONFIG_SYS_FLASH_ADDR1] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00550055;
+	addr2[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00900090;
 	udelay(1000);
 
 	value = addr2[0];
 	DEBUGF("FLASH MANUFACT: %x\n", value);
 
 	switch (value) {
-		case (CFG_FLASH_WORD_SIZE) AMD_MANUFACT:
+		case (CONFIG_SYS_FLASH_WORD_SIZE) AMD_MANUFACT:
 			info->flash_id = FLASH_MAN_AMD;
 			break;
 		default:
@@ -228,13 +228,13 @@ static ulong flash_get_size(vu_long * addr, flash_info_t * info)
 	for (i = 0; i < info->sector_count; i++) {
 		/* read sector protection at sector address, (A7 .. A0) = 0x02 */
 		/* D0 = 1 if protected */
-		addr2 = (volatile CFG_FLASH_WORD_SIZE *)(info->start[i]);
+		addr2 = (volatile CONFIG_SYS_FLASH_WORD_SIZE *)(info->start[i]);
 
 		info->protect[i] = addr2[2] & 1;
 	}
 
 	/* issue bank reset to return to read mode */
-	addr2[0] = (CFG_FLASH_WORD_SIZE) 0x00F000F0;
+	addr2[0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00F000F0;
 
 	return (info->size);
 }
@@ -242,14 +242,14 @@ static ulong flash_get_size(vu_long * addr, flash_info_t * info)
 static int wait_for_DQ7_32(flash_info_t * info, int sect)
 {
 	ulong start, now, last;
-	volatile CFG_FLASH_WORD_SIZE *addr =
-		(CFG_FLASH_WORD_SIZE *) (info->start[sect]);
+	volatile CONFIG_SYS_FLASH_WORD_SIZE *addr =
+		(CONFIG_SYS_FLASH_WORD_SIZE *) (info->start[sect]);
 
 	start = get_timer(0);
 	last = start;
-	while ((addr[0] & (CFG_FLASH_WORD_SIZE) 0x00800080) !=
-			(CFG_FLASH_WORD_SIZE) 0x00800080) {
-		if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+	while ((addr[0] & (CONFIG_SYS_FLASH_WORD_SIZE) 0x00800080) !=
+			(CONFIG_SYS_FLASH_WORD_SIZE) 0x00800080) {
+		if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
 			printf("Timeout\n");
 			return -1;
 		}
@@ -262,7 +262,7 @@ static int wait_for_DQ7_32(flash_info_t * info, int sect)
 	return 0;
 }
 
-#ifdef CFG_FLASH_2ND_16BIT_DEV
+#ifdef CONFIG_SYS_FLASH_2ND_16BIT_DEV
 int flash_erase(flash_info_t * info, int s_first, int s_last)
 {
 	if ((info->flash_id & FLASH_TYPEMASK) == FLASH_AM320B) {
@@ -277,8 +277,8 @@ static int flash_erase_32(flash_info_t * info, int s_first, int s_last)
 int flash_erase(flash_info_t * info, int s_first, int s_last)
 #endif
 {
-	volatile CFG_FLASH_WORD_SIZE *addr = (CFG_FLASH_WORD_SIZE *) (info->start[0]);
-	volatile CFG_FLASH_WORD_SIZE *addr2;
+	volatile CONFIG_SYS_FLASH_WORD_SIZE *addr = (CONFIG_SYS_FLASH_WORD_SIZE *) (info->start[0]);
+	volatile CONFIG_SYS_FLASH_WORD_SIZE *addr2;
 	int flag, prot, sect, l_sect;
 
 	if ((s_first < 0) || (s_first > s_last)) {
@@ -313,14 +313,14 @@ int flash_erase(flash_info_t * info, int s_first, int s_last)
 	/* Start erase on unprotected sectors */
 	for (sect = s_first; sect <= s_last; sect++) {
 		if (info->protect[sect] == 0) {	/* not protected */
-			addr2 = (CFG_FLASH_WORD_SIZE *) (info->start[sect]);
+			addr2 = (CONFIG_SYS_FLASH_WORD_SIZE *) (info->start[sect]);
 
-			addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00AA00AA;
-			addr[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x00550055;
-			addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00800080;
-			addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00AA00AA;
-			addr[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x00550055;
-			addr2[0] = (CFG_FLASH_WORD_SIZE) 0x00300030;	/* sector erase */
+			addr[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00AA00AA;
+			addr[CONFIG_SYS_FLASH_ADDR1] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00550055;
+			addr[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00800080;
+			addr[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00AA00AA;
+			addr[CONFIG_SYS_FLASH_ADDR1] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00550055;
+			addr2[0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00300030;	/* sector erase */
 
 			l_sect = sect;
 			/*
@@ -342,8 +342,8 @@ int flash_erase(flash_info_t * info, int s_first, int s_last)
 	udelay(1000);
 
 	/* reset to read mode */
-	addr = (CFG_FLASH_WORD_SIZE *) info->start[0];
-	addr[0] = (CFG_FLASH_WORD_SIZE) 0x00F000F0;	/* reset bank */
+	addr = (CONFIG_SYS_FLASH_WORD_SIZE *) info->start[0];
+	addr[0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00F000F0;	/* reset bank */
 
 	printf(" done\n");
 	return 0;
@@ -423,7 +423,7 @@ int write_buff(flash_info_t * info, uchar * src, ulong addr, ulong cnt)
  * 1 - write timeout
  * 2 - Flash not erased
  */
-#ifdef CFG_FLASH_2ND_16BIT_DEV
+#ifdef CONFIG_SYS_FLASH_2ND_16BIT_DEV
 static int write_word(flash_info_t * info, ulong dest, ulong data)
 {
 	if ((info->flash_id & FLASH_TYPEMASK) == FLASH_AM320B) {
@@ -438,9 +438,9 @@ static int write_word_32(flash_info_t * info, ulong dest, ulong data)
 static int write_word(flash_info_t * info, ulong dest, ulong data)
 #endif
 {
-	volatile CFG_FLASH_WORD_SIZE *addr2 = (CFG_FLASH_WORD_SIZE *) (info->start[0]);
-	volatile CFG_FLASH_WORD_SIZE *dest2 = (CFG_FLASH_WORD_SIZE *) dest;
-	volatile CFG_FLASH_WORD_SIZE *data2 = (CFG_FLASH_WORD_SIZE *) & data;
+	volatile CONFIG_SYS_FLASH_WORD_SIZE *addr2 = (CONFIG_SYS_FLASH_WORD_SIZE *) (info->start[0]);
+	volatile CONFIG_SYS_FLASH_WORD_SIZE *dest2 = (CONFIG_SYS_FLASH_WORD_SIZE *) dest;
+	volatile CONFIG_SYS_FLASH_WORD_SIZE *data2 = (CONFIG_SYS_FLASH_WORD_SIZE *) & data;
 	ulong start;
 	int i, flag;
 
@@ -448,13 +448,13 @@ static int write_word(flash_info_t * info, ulong dest, ulong data)
 	if ((*((vu_long *)dest) & data) != data)
 		return (2);
 
-	for (i = 0; i < 4 / sizeof(CFG_FLASH_WORD_SIZE); i++) {
+	for (i = 0; i < 4 / sizeof(CONFIG_SYS_FLASH_WORD_SIZE); i++) {
 		/* Disable interrupts which might cause a timeout here */
 		flag = disable_interrupts();
 
-		addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00AA00AA;
-		addr2[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x00550055;
-		addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00A000A0;
+		addr2[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00AA00AA;
+		addr2[CONFIG_SYS_FLASH_ADDR1] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00550055;
+		addr2[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00A000A0;
 
 		dest2[i] = data2[i];
 
@@ -464,10 +464,10 @@ static int write_word(flash_info_t * info, ulong dest, ulong data)
 
 		/* data polling for D7 */
 		start = get_timer(0);
-		while ((dest2[i] & (CFG_FLASH_WORD_SIZE) 0x00800080) !=
-				(data2[i] & (CFG_FLASH_WORD_SIZE) 0x00800080)) {
+		while ((dest2[i] & (CONFIG_SYS_FLASH_WORD_SIZE) 0x00800080) !=
+				(data2[i] & (CONFIG_SYS_FLASH_WORD_SIZE) 0x00800080)) {
 
-			if (get_timer(start) > CFG_FLASH_WRITE_TOUT)
+			if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT)
 				return (1);
 		}
 	}
@@ -475,10 +475,10 @@ static int write_word(flash_info_t * info, ulong dest, ulong data)
 	return (0);
 }
 
-#ifdef CFG_FLASH_2ND_16BIT_DEV
+#ifdef CONFIG_SYS_FLASH_2ND_16BIT_DEV
 
-#undef  CFG_FLASH_WORD_SIZE
-#define CFG_FLASH_WORD_SIZE unsigned short
+#undef  CONFIG_SYS_FLASH_WORD_SIZE
+#define CONFIG_SYS_FLASH_WORD_SIZE unsigned short
 
 /*
  * The following code cannot be run from FLASH!
@@ -486,29 +486,29 @@ static int write_word(flash_info_t * info, ulong dest, ulong data)
 static ulong flash_get_size_16(vu_long * addr, flash_info_t * info)
 {
 	short i;
-	CFG_FLASH_WORD_SIZE value;
+	CONFIG_SYS_FLASH_WORD_SIZE value;
 	ulong base = (ulong) addr;
-	volatile CFG_FLASH_WORD_SIZE *addr2 = (CFG_FLASH_WORD_SIZE *) addr;
+	volatile CONFIG_SYS_FLASH_WORD_SIZE *addr2 = (CONFIG_SYS_FLASH_WORD_SIZE *) addr;
 
 	DEBUGF("get_size16: FLASH ADDR: %08x\n", (unsigned)addr);
 
 	/* issue bank reset to return to read mode */
-	addr2[0] = (CFG_FLASH_WORD_SIZE) 0xF000F000;
+	addr2[0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0xF000F000;
 
 	/* Write auto select command: read Manufacturer ID */
-	addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0xAA00AA00;
-	addr2[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x55005500;
-	addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x90009000;
+	addr2[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0xAA00AA00;
+	addr2[CONFIG_SYS_FLASH_ADDR1] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x55005500;
+	addr2[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x90009000;
 	udelay(1000);
 
 	value = swap16(addr2[0]);
 	DEBUGF("FLASH MANUFACT: %x\n", value);
 
 	switch (value) {
-		case (CFG_FLASH_WORD_SIZE) AMD_MANUFACT:
+		case (CONFIG_SYS_FLASH_WORD_SIZE) AMD_MANUFACT:
 			info->flash_id = FLASH_MAN_AMD;
 			break;
-		case (CFG_FLASH_WORD_SIZE) FUJ_MANUFACT:
+		case (CONFIG_SYS_FLASH_WORD_SIZE) FUJ_MANUFACT:
 			info->flash_id = FLASH_MAN_FUJ;
 			break;
 		default:
@@ -522,12 +522,12 @@ static ulong flash_get_size_16(vu_long * addr, flash_info_t * info)
 	DEBUGF("\nFLASH DEVICEID: %x\n", value);
 
 	switch (value) {
-		case (CFG_FLASH_WORD_SIZE)AMD_ID_LV320B:
+		case (CONFIG_SYS_FLASH_WORD_SIZE)AMD_ID_LV320B:
 			info->flash_id += FLASH_AM320B;
 			info->sector_count = 71;
 			info->size = 0x00400000;
 			break;	/* => 4 MB	*/
-		case (CFG_FLASH_WORD_SIZE)AMD_ID_LV320T:
+		case (CONFIG_SYS_FLASH_WORD_SIZE)AMD_ID_LV320T:
 			info->flash_id += FLASH_AM320T;
 			info->sector_count = 71;
 			info->size = 0x00400000;
@@ -569,13 +569,13 @@ static ulong flash_get_size_16(vu_long * addr, flash_info_t * info)
 	for (i = 0; i < info->sector_count; i++) {
 		/* read sector protection at sector address, (A7 .. A0) = 0x02 */
 		/* D0 = 1 if protected */
-		addr2 = (volatile CFG_FLASH_WORD_SIZE *)(info->start[i]);
+		addr2 = (volatile CONFIG_SYS_FLASH_WORD_SIZE *)(info->start[i]);
 
 		info->protect[i] = addr2[2] & 1;
 	}
 
 	/* issue bank reset to return to read mode */
-	addr2[0] = (CFG_FLASH_WORD_SIZE) 0xF000F000;
+	addr2[0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0xF000F000;
 
 	return (info->size);
 }
@@ -583,14 +583,14 @@ static ulong flash_get_size_16(vu_long * addr, flash_info_t * info)
 static int wait_for_DQ7_16(flash_info_t * info, int sect)
 {
 	ulong start, now, last;
-	volatile CFG_FLASH_WORD_SIZE *addr =
-		(CFG_FLASH_WORD_SIZE *) (info->start[sect]);
+	volatile CONFIG_SYS_FLASH_WORD_SIZE *addr =
+		(CONFIG_SYS_FLASH_WORD_SIZE *) (info->start[sect]);
 
 	start = get_timer(0);
 	last = start;
-	while ((addr[0] & (CFG_FLASH_WORD_SIZE) 0x80008000) !=
-			(CFG_FLASH_WORD_SIZE) 0x80008000) {
-		if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+	while ((addr[0] & (CONFIG_SYS_FLASH_WORD_SIZE) 0x80008000) !=
+			(CONFIG_SYS_FLASH_WORD_SIZE) 0x80008000) {
+		if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
 			printf("Timeout\n");
 			return -1;
 		}
@@ -605,8 +605,8 @@ static int wait_for_DQ7_16(flash_info_t * info, int sect)
 
 static int flash_erase_16(flash_info_t * info, int s_first, int s_last)
 {
-	volatile CFG_FLASH_WORD_SIZE *addr = (CFG_FLASH_WORD_SIZE *) (info->start[0]);
-	volatile CFG_FLASH_WORD_SIZE *addr2;
+	volatile CONFIG_SYS_FLASH_WORD_SIZE *addr = (CONFIG_SYS_FLASH_WORD_SIZE *) (info->start[0]);
+	volatile CONFIG_SYS_FLASH_WORD_SIZE *addr2;
 	int flag, prot, sect, l_sect;
 
 	if ((s_first < 0) || (s_first > s_last)) {
@@ -641,14 +641,14 @@ static int flash_erase_16(flash_info_t * info, int s_first, int s_last)
 	/* Start erase on unprotected sectors */
 	for (sect = s_first; sect <= s_last; sect++) {
 		if (info->protect[sect] == 0) {	/* not protected */
-			addr2 = (CFG_FLASH_WORD_SIZE *) (info->start[sect]);
+			addr2 = (CONFIG_SYS_FLASH_WORD_SIZE *) (info->start[sect]);
 
-			addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0xAA00AA00;
-			addr[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x55005500;
-			addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x80008000;
-			addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0xAA00AA00;
-			addr[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x55005500;
-			addr2[0] = (CFG_FLASH_WORD_SIZE) 0x30003000;	/* sector erase */
+			addr[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0xAA00AA00;
+			addr[CONFIG_SYS_FLASH_ADDR1] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x55005500;
+			addr[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x80008000;
+			addr[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0xAA00AA00;
+			addr[CONFIG_SYS_FLASH_ADDR1] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x55005500;
+			addr2[0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x30003000;	/* sector erase */
 
 			l_sect = sect;
 			/*
@@ -670,8 +670,8 @@ static int flash_erase_16(flash_info_t * info, int s_first, int s_last)
 	udelay(1000);
 
 	/* reset to read mode */
-	addr = (CFG_FLASH_WORD_SIZE *) info->start[0];
-	addr[0] = (CFG_FLASH_WORD_SIZE) 0xF000F000;	/* reset bank */
+	addr = (CONFIG_SYS_FLASH_WORD_SIZE *) info->start[0];
+	addr[0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0xF000F000;	/* reset bank */
 
 	printf(" done\n");
 	return 0;
@@ -679,27 +679,27 @@ static int flash_erase_16(flash_info_t * info, int s_first, int s_last)
 
 static int write_word_16(flash_info_t * info, ulong dest, ulong data)
 {
-	volatile CFG_FLASH_WORD_SIZE *addr2 = (CFG_FLASH_WORD_SIZE *) (info->start[0]);
-	volatile CFG_FLASH_WORD_SIZE *dest2 = (CFG_FLASH_WORD_SIZE *) dest;
-	volatile CFG_FLASH_WORD_SIZE *data2 = (CFG_FLASH_WORD_SIZE *) & data;
+	volatile CONFIG_SYS_FLASH_WORD_SIZE *addr2 = (CONFIG_SYS_FLASH_WORD_SIZE *) (info->start[0]);
+	volatile CONFIG_SYS_FLASH_WORD_SIZE *dest2 = (CONFIG_SYS_FLASH_WORD_SIZE *) dest;
+	volatile CONFIG_SYS_FLASH_WORD_SIZE *data2 = (CONFIG_SYS_FLASH_WORD_SIZE *) & data;
 	ulong start;
 	int i;
 
 	/* Check if Flash is (sufficiently) erased */
-	for (i = 0; i < 4 / sizeof(CFG_FLASH_WORD_SIZE); i++) {
+	for (i = 0; i < 4 / sizeof(CONFIG_SYS_FLASH_WORD_SIZE); i++) {
 		if ((dest2[i] & swap16(data2[i])) != swap16(data2[i]))
 			return (2);
 	}
 
-	for (i = 0; i < 4 / sizeof(CFG_FLASH_WORD_SIZE); i++) {
+	for (i = 0; i < 4 / sizeof(CONFIG_SYS_FLASH_WORD_SIZE); i++) {
 		int flag;
 
 		/* Disable interrupts which might cause a timeout here */
 		flag = disable_interrupts();
 
-		addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0xAA00AA00;
-		addr2[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x55005500;
-		addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0xA000A000;
+		addr2[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0xAA00AA00;
+		addr2[CONFIG_SYS_FLASH_ADDR1] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x55005500;
+		addr2[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0xA000A000;
 
 		dest2[i] = swap16(data2[i]);
 
@@ -709,10 +709,10 @@ static int write_word_16(flash_info_t * info, ulong dest, ulong data)
 
 		/* data polling for D7 */
 		start = get_timer(0);
-		while ((dest2[i] & (CFG_FLASH_WORD_SIZE) 0x80008000) !=
-				(swap16(data2[i]) & (CFG_FLASH_WORD_SIZE) 0x80008000)) {
+		while ((dest2[i] & (CONFIG_SYS_FLASH_WORD_SIZE) 0x80008000) !=
+				(swap16(data2[i]) & (CONFIG_SYS_FLASH_WORD_SIZE) 0x80008000)) {
 
-			if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+			if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
 				return (1);
 			}
 		}
@@ -720,7 +720,7 @@ static int write_word_16(flash_info_t * info, ulong dest, ulong data)
 
 	return (0);
 }
-#endif /* CFG_FLASH_2ND_16BIT_DEV */
+#endif /* CONFIG_SYS_FLASH_2ND_16BIT_DEV */
 
 /*-----------------------------------------------------------------------
  * Functions
@@ -734,7 +734,7 @@ static int write_word(flash_info_t * info, ulong dest, ulong data);
 unsigned long flash_init(void)
 {
 	unsigned long total_b = 0;
-	unsigned long size_b[CFG_MAX_FLASH_BANKS];
+	unsigned long size_b[CONFIG_SYS_MAX_FLASH_BANKS];
 	unsigned short index = 0;
 	int i;
 
@@ -742,7 +742,7 @@ unsigned long flash_init(void)
 	DEBUGF("FLASH: Index: %d\n", index);
 
 	/* Init: no FLASHes known */
-	for (i = 0; i < CFG_MAX_FLASH_BANKS; ++i) {
+	for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
 		flash_info[i].flash_id = FLASH_UNKNOWN;
 		flash_info[i].sector_count = -1;
 		flash_info[i].size = 0;
@@ -765,16 +765,16 @@ unsigned long flash_init(void)
 		}
 
 		/* Monitor protection ON by default */
-		(void)flash_protect(FLAG_PROTECT_SET, CFG_MONITOR_BASE,
-				    CFG_MONITOR_BASE + CFG_MONITOR_LEN - 1,
+		(void)flash_protect(FLAG_PROTECT_SET, CONFIG_SYS_MONITOR_BASE,
+				    CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN - 1,
 				    &flash_info[i]);
-#if defined(CFG_ENV_IS_IN_FLASH)
-		(void)flash_protect(FLAG_PROTECT_SET, CFG_ENV_ADDR,
-				    CFG_ENV_ADDR + CFG_ENV_SECT_SIZE - 1,
+#if defined(CONFIG_ENV_IS_IN_FLASH)
+		(void)flash_protect(FLAG_PROTECT_SET, CONFIG_ENV_ADDR,
+				    CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE - 1,
 				    &flash_info[i]);
-#if defined(CFG_ENV_ADDR_REDUND)
-		(void)flash_protect(FLAG_PROTECT_SET, CFG_ENV_ADDR_REDUND,
-				    CFG_ENV_ADDR_REDUND + CFG_ENV_SECT_SIZE - 1,
+#if defined(CONFIG_ENV_ADDR_REDUND)
+		(void)flash_protect(FLAG_PROTECT_SET, CONFIG_ENV_ADDR_REDUND,
+				    CONFIG_ENV_ADDR_REDUND + CONFIG_ENV_SECT_SIZE - 1,
 				    &flash_info[i]);
 #endif
 #endif
diff --git a/board/tqc/tqm5200/cmd_stk52xx.c b/board/tqc/tqm5200/cmd_stk52xx.c
index fd1e68bbb..5483fcaf7 100644
--- a/board/tqc/tqm5200/cmd_stk52xx.c
+++ b/board/tqc/tqm5200/cmd_stk52xx.c
@@ -165,9 +165,9 @@ static void i2s_init(void)
 	psc->command = (PSC_RX_DISABLE | PSC_TX_DISABLE);
 	psc->sicr = 0x22E00000;		/* 16 bit data; I2S */
 
-	*(vu_long *)(CFG_MBAR + 0x22C) = 0x805d; /* PSC2 CDM MCLK config; MCLK
+	*(vu_long *)(CONFIG_SYS_MBAR + 0x22C) = 0x805d; /* PSC2 CDM MCLK config; MCLK
 						  * 5.617 MHz */
-	*(vu_long *)(CFG_MBAR + 0x214) |= 0x00000040; /* CDM clock enable
+	*(vu_long *)(CONFIG_SYS_MBAR + 0x214) |= 0x00000040; /* CDM clock enable
 						       * register */
 	psc->ccr = 0x1F03;	/* 16 bit data width; 5.617MHz MCLK */
 	psc->ctur = 0x0F;	/* 16 bit frame width */
@@ -751,9 +751,9 @@ int can_init(void)
 	static int init_done = 0;
 	int i;
 	struct mpc5xxx_mscan *can1 =
-		(struct mpc5xxx_mscan *)(CFG_MBAR + 0x0900);
+		(struct mpc5xxx_mscan *)(CONFIG_SYS_MBAR + 0x0900);
 	struct mpc5xxx_mscan *can2 =
-		(struct mpc5xxx_mscan *)(CFG_MBAR + 0x0980);
+		(struct mpc5xxx_mscan *)(CONFIG_SYS_MBAR + 0x0980);
 
 	/* GPIO configuration of the CAN pins is done in TQM5200.h */
 
@@ -896,9 +896,9 @@ int do_can(char *argv[])
 {
 	int i;
 	struct mpc5xxx_mscan *can1 =
-		(struct mpc5xxx_mscan *)(CFG_MBAR + 0x0900);
+		(struct mpc5xxx_mscan *)(CONFIG_SYS_MBAR + 0x0900);
 	struct mpc5xxx_mscan *can2 =
-		(struct mpc5xxx_mscan *)(CFG_MBAR + 0x0980);
+		(struct mpc5xxx_mscan *)(CONFIG_SYS_MBAR + 0x0980);
 
 	/* send a message on CAN1 */
 	can1->cantbsel = 0x01;
diff --git a/board/tqc/tqm5200/tqm5200.c b/board/tqc/tqm5200/tqm5200.c
index 8b8e46137..faa2e0219 100644
--- a/board/tqc/tqm5200/tqm5200.c
+++ b/board/tqc/tqm5200/tqm5200.c
@@ -32,6 +32,7 @@
 #include <pci.h>
 #include <asm/processor.h>
 #include <libfdt.h>
+#include <netdev.h>
 
 #ifdef CONFIG_VIDEO_SM501
 #include <sm501.h>
@@ -53,7 +54,7 @@ DECLARE_GLOBAL_DATA_PTR;
 void ps2mult_early_init(void);
 #endif
 
-#ifndef CFG_RAMBOOT
+#ifndef CONFIG_SYS_RAMBOOT
 static void sdram_start (int hi_addr)
 {
 	long hi_addr_bit = hi_addr ? 0x01000000 : 0;
@@ -100,7 +101,7 @@ static void sdram_start (int hi_addr)
 
 /*
  * ATTENTION: Although partially referenced initdram does NOT make real use
- *	      use of CFG_SDRAM_BASE. The code does not work if CFG_SDRAM_BASE
+ *	      use of CONFIG_SYS_SDRAM_BASE. The code does not work if CONFIG_SYS_SDRAM_BASE
  *	      is something else than 0x00000000.
  */
 
@@ -110,7 +111,7 @@ phys_size_t initdram (int board_type)
 	ulong dramsize2 = 0;
 	uint svr, pvr;
 
-#ifndef CFG_RAMBOOT
+#ifndef CONFIG_SYS_RAMBOOT
 	ulong test1, test2;
 
 	/* setup SDRAM chip selects */
@@ -131,9 +132,9 @@ phys_size_t initdram (int board_type)
 
 	/* find RAM size using SDRAM CS0 only */
 	sdram_start(0);
-	test1 = get_ram_size((long *)CFG_SDRAM_BASE, 0x20000000);
+	test1 = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE, 0x20000000);
 	sdram_start(1);
-	test2 = get_ram_size((long *)CFG_SDRAM_BASE, 0x20000000);
+	test2 = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE, 0x20000000);
 	if (test1 > test2) {
 		sdram_start(0);
 		dramsize = test1;
@@ -160,10 +161,10 @@ phys_size_t initdram (int board_type)
 	/* find RAM size using SDRAM CS1 only */
 	if (!dramsize)
 		sdram_start(0);
-	test2 = test1 = get_ram_size((long *)(CFG_SDRAM_BASE + dramsize), 0x20000000);
+	test2 = test1 = get_ram_size((long *)(CONFIG_SYS_SDRAM_BASE + dramsize), 0x20000000);
 	if (!dramsize) {
 		sdram_start(1);
-		test2 = get_ram_size((long *)(CFG_SDRAM_BASE + dramsize), 0x20000000);
+		test2 = get_ram_size((long *)(CONFIG_SYS_SDRAM_BASE + dramsize), 0x20000000);
 	}
 	if (test1 > test2) {
 		sdram_start(0);
@@ -185,7 +186,7 @@ phys_size_t initdram (int board_type)
 		*(vu_long *)MPC5XXX_SDRAM_CS1CFG = dramsize; /* disabled */
 	}
 
-#else /* CFG_RAMBOOT */
+#else /* CONFIG_SYS_RAMBOOT */
 
 	/* retrieve size of memory connected to SDRAM CS0 */
 	dramsize = *(vu_long *)MPC5XXX_SDRAM_CS0CFG & 0xFF;
@@ -202,7 +203,7 @@ phys_size_t initdram (int board_type)
 	} else {
 		dramsize2 = 0;
 	}
-#endif /* CFG_RAMBOOT */
+#endif /* CONFIG_SYS_RAMBOOT */
 
 	/*
 	 * On MPC5200B we need to set the special configuration delay in the
@@ -405,7 +406,7 @@ int board_early_init_r (void)
 	ps2mult_early_init();
 #endif /* CONFIG_PS2MULT */
 
-#if defined(CONFIG_USB_OHCI_NEW) && defined(CFG_USB_OHCI_CPU_INIT)
+#if defined(CONFIG_USB_OHCI_NEW) && defined(CONFIG_SYS_USB_OHCI_CPU_INIT)
 	/* Low level USB init, required for proper kernel operation */
 	usb_cpu_init();
 #endif
@@ -463,34 +464,34 @@ int last_stage_init (void)
 	 */
 
 	/* save original SRAM content  */
-	save = *(volatile u16 *)CFG_CS2_START;
+	save = *(volatile u16 *)CONFIG_SYS_CS2_START;
 	restore = 1;
 
 	/* write test pattern to SRAM */
-	*(volatile u16 *)CFG_CS2_START = 0xA5A5;
+	*(volatile u16 *)CONFIG_SYS_CS2_START = 0xA5A5;
 	__asm__ volatile ("sync");
 	/*
 	 * Put a different pattern on the data lines: otherwise they may float
 	 * long enough to read back what we wrote.
 	 */
-	tmp = *(volatile u16 *)CFG_FLASH_BASE;
+	tmp = *(volatile u16 *)CONFIG_SYS_FLASH_BASE;
 	if (tmp == 0xA5A5)
 		puts ("!! possible error in SRAM detection\n");
 
-	if (*(volatile u16 *)CFG_CS2_START != 0xA5A5) {
+	if (*(volatile u16 *)CONFIG_SYS_CS2_START != 0xA5A5) {
 		/* no SRAM at all, disable cs */
 		*(vu_long *)MPC5XXX_ADDECR &= ~(1 << 18);
 		*(vu_long *)MPC5XXX_CS2_START = 0x0000FFFF;
 		*(vu_long *)MPC5XXX_CS2_STOP = 0x0000FFFF;
 		restore = 0;
 		__asm__ volatile ("sync");
-	} else if (*(volatile u16 *)(CFG_CS2_START + (1<<19)) == 0xA5A5) {
+	} else if (*(volatile u16 *)(CONFIG_SYS_CS2_START + (1<<19)) == 0xA5A5) {
 		/* make sure that we access a mirrored address */
-		*(volatile u16 *)CFG_CS2_START = 0x1111;
+		*(volatile u16 *)CONFIG_SYS_CS2_START = 0x1111;
 		__asm__ volatile ("sync");
-		if (*(volatile u16 *)(CFG_CS2_START + (1<<19)) == 0x1111) {
+		if (*(volatile u16 *)(CONFIG_SYS_CS2_START + (1<<19)) == 0x1111) {
 			/* SRAM size = 512 kByte */
-			*(vu_long *)MPC5XXX_CS2_STOP = STOP_REG(CFG_CS2_START,
+			*(vu_long *)MPC5XXX_CS2_STOP = STOP_REG(CONFIG_SYS_CS2_START,
 								0x80000);
 			__asm__ volatile ("sync");
 			puts ("SRAM:  512 kB\n");
@@ -502,7 +503,7 @@ int last_stage_init (void)
 	}
 	/* restore origianl SRAM content  */
 	if (restore) {
-		*(volatile u16 *)CFG_CS2_START = save;
+		*(volatile u16 *)CONFIG_SYS_CS2_START = save;
 		__asm__ volatile ("sync");
 	}
 
@@ -512,21 +513,21 @@ int last_stage_init (void)
 	 */
 
 	/* save origianl FB content  */
-	save = *(volatile u16 *)CFG_CS1_START;
+	save = *(volatile u16 *)CONFIG_SYS_CS1_START;
 	restore = 1;
 
 	/* write test pattern to FB memory */
-	*(volatile u16 *)CFG_CS1_START = 0xA5A5;
+	*(volatile u16 *)CONFIG_SYS_CS1_START = 0xA5A5;
 	__asm__ volatile ("sync");
 	/*
 	 * Put a different pattern on the data lines: otherwise they may float
 	 * long enough to read back what we wrote.
 	 */
-	tmp = *(volatile u16 *)CFG_FLASH_BASE;
+	tmp = *(volatile u16 *)CONFIG_SYS_FLASH_BASE;
 	if (tmp == 0xA5A5)
 		puts ("!! possible error in grafic controller detection\n");
 
-	if (*(volatile u16 *)CFG_CS1_START != 0xA5A5) {
+	if (*(volatile u16 *)CONFIG_SYS_CS1_START != 0xA5A5) {
 		/* no grafic controller at all, disable cs */
 		*(vu_long *)MPC5XXX_ADDECR &= ~(1 << 17);
 		*(vu_long *)MPC5XXX_CS1_START = 0x0000FFFF;
@@ -538,7 +539,7 @@ int last_stage_init (void)
 	}
 	/* restore origianl FB content  */
 	if (restore) {
-		*(volatile u16 *)CFG_CS1_START = save;
+		*(volatile u16 *)CONFIG_SYS_CS1_START = save;
 		__asm__ volatile ("sync");
 	}
 
@@ -678,21 +679,21 @@ unsigned int board_video_init (void)
 	 */
 
 	/* save origianl FB content  */
-	save = *(volatile u16 *)CFG_CS1_START;
+	save = *(volatile u16 *)CONFIG_SYS_CS1_START;
 	restore = 1;
 
 	/* write test pattern to FB memory */
-	*(volatile u16 *)CFG_CS1_START = 0xA5A5;
+	*(volatile u16 *)CONFIG_SYS_CS1_START = 0xA5A5;
 	__asm__ volatile ("sync");
 	/*
 	 * Put a different pattern on the data lines: otherwise they may float
 	 * long enough to read back what we wrote.
 	 */
-	tmp = *(volatile u16 *)CFG_FLASH_BASE;
+	tmp = *(volatile u16 *)CONFIG_SYS_FLASH_BASE;
 	if (tmp == 0xA5A5)
 		puts ("!! possible error in grafic controller detection\n");
 
-	if (*(volatile u16 *)CFG_CS1_START != 0xA5A5) {
+	if (*(volatile u16 *)CONFIG_SYS_CS1_START != 0xA5A5) {
 		/* no grafic controller found */
 		restore = 0;
 		ret = 0;
@@ -701,7 +702,7 @@ unsigned int board_video_init (void)
 	}
 
 	if (restore) {
-		*(volatile u16 *)CFG_CS1_START = save;
+		*(volatile u16 *)CONFIG_SYS_CS1_START = save;
 		__asm__ volatile ("sync");
 	}
 	return ret;
@@ -749,3 +750,9 @@ void ft_board_setup(void *blob, bd_t *bd)
 	fdt_fixup_memory(blob, (u64)bd->bi_memstart, (u64)bd->bi_memsize);
 }
 #endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */
+
+int board_eth_init(bd_t *bis)
+{
+	cpu_eth_init(bis); /* Built in FEC comes first */
+	return pci_eth_init(bis);
+}
diff --git a/board/tqc/tqm8260/Makefile b/board/tqc/tqm8260/Makefile
index 61221fdca..94ba1e94e 100644
--- a/board/tqc/tqm8260/Makefile
+++ b/board/tqc/tqm8260/Makefile
@@ -28,7 +28,7 @@ endif
 
 LIB	= $(obj)lib$(BOARD).a
 
-COBJS	= $(BOARD).o flash.o ../tqm8xx/load_sernum_ethaddr.o
+COBJS	= $(BOARD).o ../tqm8xx/load_sernum_ethaddr.o
 
 SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
 OBJS	:= $(addprefix $(obj),$(COBJS))
diff --git a/board/tqc/tqm8260/config.mk b/board/tqc/tqm8260/config.mk
index 1fe99524c..3ecfc4876 100644
--- a/board/tqc/tqm8260/config.mk
+++ b/board/tqc/tqm8260/config.mk
@@ -25,7 +25,7 @@
 # TQM8260 boards
 #
 
-# This should be equal to the CFG_FLASH_BASE define in config_TQM8260.h
+# This should be equal to the CONFIG_SYS_FLASH_BASE define in config_TQM8260.h
 # for the "final" configuration, with U-Boot in flash, or the address
 # in RAM where U-Boot is loaded at for debugging.
 #
diff --git a/board/tqc/tqm8260/flash.c b/board/tqc/tqm8260/flash.c
deleted file mode 100644
index 056fe810b..000000000
--- a/board/tqc/tqm8260/flash.c
+++ /dev/null
@@ -1,488 +0,0 @@
-/*
- * (C) Copyright 2001, 2002
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * Flash Routines for AMD devices on the TQM8260 board
- *
- *--------------------------------------------------------------------
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <mpc8xx.h>
-
-#define V_ULONG(a)	(*(volatile unsigned long *)( a ))
-#define V_BYTE(a)	(*(volatile unsigned char *)( a ))
-
-
-flash_info_t flash_info[CFG_MAX_FLASH_BANKS];
-
-
-/*-----------------------------------------------------------------------
- */
-void flash_reset (void)
-{
-	if (flash_info[0].flash_id != FLASH_UNKNOWN) {
-		V_ULONG (flash_info[0].start[0]) = 0x00F000F0;
-		V_ULONG (flash_info[0].start[0] + 4) = 0x00F000F0;
-	}
-}
-
-/*-----------------------------------------------------------------------
- */
-ulong flash_get_size (ulong baseaddr, flash_info_t * info)
-{
-	short i;
-	unsigned long flashtest_h, flashtest_l;
-
-	/* Write auto select command sequence and test FLASH answer */
-	V_ULONG (baseaddr + ((ulong) 0x0555 << 3)) = 0x00AA00AA;
-	V_ULONG (baseaddr + ((ulong) 0x02AA << 3)) = 0x00550055;
-	V_ULONG (baseaddr + ((ulong) 0x0555 << 3)) = 0x00900090;
-	V_ULONG (baseaddr + 4 + ((ulong) 0x0555 << 3)) = 0x00AA00AA;
-	V_ULONG (baseaddr + 4 + ((ulong) 0x02AA << 3)) = 0x00550055;
-	V_ULONG (baseaddr + 4 + ((ulong) 0x0555 << 3)) = 0x00900090;
-
-	flashtest_h = V_ULONG (baseaddr);	/* manufacturer ID     */
-	flashtest_l = V_ULONG (baseaddr + 4);
-
-	switch ((int) flashtest_h) {
-	case AMD_MANUFACT:
-		info->flash_id = FLASH_MAN_AMD;
-		break;
-	case FUJ_MANUFACT:
-		info->flash_id = FLASH_MAN_FUJ;
-		break;
-	default:
-		info->flash_id = FLASH_UNKNOWN;
-		info->sector_count = 0;
-		info->size = 0;
-		return (0);			/* no or unknown flash     */
-	}
-
-	flashtest_h = V_ULONG (baseaddr + 8);	/* device ID           */
-	flashtest_l = V_ULONG (baseaddr + 12);
-	if (flashtest_h != flashtest_l) {
-		info->flash_id = FLASH_UNKNOWN;
-	} else {
-		switch (flashtest_h) {
-		case AMD_ID_LV800T:
-			info->flash_id += FLASH_AM800T;
-			info->sector_count = 19;
-			info->size = 0x00400000;
-			break;			/* 4 * 1 MB = 4 MB  */
-		case AMD_ID_LV800B:
-			info->flash_id += FLASH_AM800B;
-			info->sector_count = 19;
-			info->size = 0x00400000;
-			break;			/* 4 * 1 MB = 4 MB  */
-		case AMD_ID_LV160T:
-			info->flash_id += FLASH_AM160T;
-			info->sector_count = 35;
-			info->size = 0x00800000;
-			break;			/* 4 * 2 MB = 8 MB  */
-		case AMD_ID_LV160B:
-			info->flash_id += FLASH_AM160B;
-			info->sector_count = 35;
-			info->size = 0x00800000;
-			break;			/* 4 * 2 MB = 8 MB  */
-		case AMD_ID_DL322T:
-			info->flash_id += FLASH_AMDL322T;
-			info->sector_count = 71;
-			info->size = 0x01000000;
-			break;			/* 4 * 4 MB = 16 MB */
-		case AMD_ID_DL322B:
-			info->flash_id += FLASH_AMDL322B;
-			info->sector_count = 71;
-			info->size = 0x01000000;
-			break;			/* 4 * 4 MB = 16 MB */
-		case AMD_ID_DL323T:
-			info->flash_id += FLASH_AMDL323T;
-			info->sector_count = 71;
-			info->size = 0x01000000;
-			break;			/* 4 * 4 MB = 16 MB */
-		case AMD_ID_DL323B:
-			info->flash_id += FLASH_AMDL323B;
-			info->sector_count = 71;
-			info->size = 0x01000000;
-			break;			/* 4 * 4 MB = 16 MB */
-		case AMD_ID_LV640U:
-			info->flash_id += FLASH_AM640U;
-			info->sector_count = 128;
-			info->size = 0x02000000;
-			break;			/* 4 * 8 MB = 32 MB */
-		default:
-			info->flash_id = FLASH_UNKNOWN;
-			return (0);		/* no or unknown flash     */
-		}
-	}
-
-	if (flashtest_h == AMD_ID_LV640U) {
-
-		/* set up sector start adress table (uniform sector type) */
-		for (i = 0; i < info->sector_count; i++)
-			info->start[i] = baseaddr + (i * 0x00040000);
-
-	} else if (info->flash_id & FLASH_BTYPE) {
-
-		/* set up sector start adress table (bottom sector type) */
-		info->start[0] = baseaddr + 0x00000000;
-		info->start[1] = baseaddr + 0x00010000;
-		info->start[2] = baseaddr + 0x00018000;
-		info->start[3] = baseaddr + 0x00020000;
-		for (i = 4; i < info->sector_count; i++) {
-			info->start[i] = baseaddr + (i * 0x00040000) - 0x000C0000;
-		}
-
-	} else {
-
-		/* set up sector start adress table (top sector type) */
-		i = info->sector_count - 1;
-		info->start[i--] = baseaddr + info->size - 0x00010000;
-		info->start[i--] = baseaddr + info->size - 0x00018000;
-		info->start[i--] = baseaddr + info->size - 0x00020000;
-		for (; i >= 0; i--) {
-			info->start[i] = baseaddr + i * 0x00040000;
-		}
-	}
-
-	/* check for protected sectors */
-	for (i = 0; i < info->sector_count; i++) {
-		/* read sector protection at sector address, (A7 .. A0) = 0x02 */
-		if ((V_ULONG (info->start[i] + 16) & 0x00010001) ||
-			(V_ULONG (info->start[i] + 20) & 0x00010001)) {
-			info->protect[i] = 1;	/* D0 = 1 if protected */
-		} else {
-			info->protect[i] = 0;
-		}
-	}
-
-	flash_reset ();
-	return (info->size);
-}
-
-/*-----------------------------------------------------------------------
- */
-unsigned long flash_init (void)
-{
-	unsigned long size_b0 = 0;
-	int i;
-
-	/* Init: no FLASHes known */
-	for (i = 0; i < CFG_MAX_FLASH_BANKS; ++i) {
-		flash_info[i].flash_id = FLASH_UNKNOWN;
-	}
-
-	/* Static FLASH Bank configuration here (only one bank) */
-
-	size_b0 = flash_get_size (CFG_FLASH0_BASE, &flash_info[0]);
-	if (flash_info[0].flash_id == FLASH_UNKNOWN || size_b0 == 0) {
-		printf ("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n",
-				size_b0, size_b0 >> 20);
-	}
-
-	/*
-	 * protect monitor and environment sectors
-	 */
-
-#if CFG_MONITOR_BASE >= CFG_FLASH0_BASE
-	flash_protect (FLAG_PROTECT_SET,
-		       CFG_MONITOR_BASE,
-		       CFG_MONITOR_BASE + monitor_flash_len - 1, &flash_info[0]);
-#endif
-
-#if (CFG_ENV_IS_IN_FLASH == 1) && defined(CFG_ENV_ADDR)
-# ifndef  CFG_ENV_SIZE
-#  define CFG_ENV_SIZE	CFG_ENV_SECT_SIZE
-# endif
-	flash_protect (FLAG_PROTECT_SET,
-		       CFG_ENV_ADDR,
-		       CFG_ENV_ADDR + CFG_ENV_SIZE - 1, &flash_info[0]);
-#endif
-
-	return (size_b0);
-}
-
-/*-----------------------------------------------------------------------
- */
-void flash_print_info (flash_info_t * info)
-{
-	int i;
-
-	if (info->flash_id == FLASH_UNKNOWN) {
-		printf ("missing or unknown FLASH type\n");
-		return;
-	}
-
-	switch (info->flash_id & FLASH_VENDMASK) {
-	case FLASH_MAN_AMD:
-		printf ("AMD ");
-		break;
-	case FLASH_MAN_FUJ:
-		printf ("FUJITSU ");
-		break;
-	default:
-		printf ("Unknown Vendor ");
-		break;
-	}
-
-	switch (info->flash_id & FLASH_TYPEMASK) {
-	case FLASH_AM800T:
-		printf ("29LV800T (8 M, top sector)\n");
-		break;
-	case FLASH_AM800B:
-		printf ("29LV800T (8 M, bottom sector)\n");
-		break;
-	case FLASH_AM160T:
-		printf ("29LV160T (16 M, top sector)\n");
-		break;
-	case FLASH_AM160B:
-		printf ("29LV160B (16 M, bottom sector)\n");
-		break;
-	case FLASH_AMDL322T:
-		printf ("29DL322T (32 M, top sector)\n");
-		break;
-	case FLASH_AMDL322B:
-		printf ("29DL322B (32 M, bottom sector)\n");
-		break;
-	case FLASH_AMDL323T:
-		printf ("29DL323T (32 M, top sector)\n");
-		break;
-	case FLASH_AMDL323B:
-		printf ("29DL323B (32 M, bottom sector)\n");
-		break;
-	case FLASH_AM640U:
-		printf ("29LV640D (64 M, uniform sector)\n");
-		break;
-	default:
-		printf ("Unknown Chip Type\n");
-		break;
-	}
-
-	printf ("  Size: %ld MB in %d Sectors\n",
-			info->size >> 20, info->sector_count);
-
-	printf ("  Sector Start Addresses:");
-	for (i = 0; i < info->sector_count; ++i) {
-		if ((i % 5) == 0)
-			printf ("\n   ");
-		printf (" %08lX%s",
-			info->start[i],
-			info->protect[i] ? " (RO)" : "     "
-		);
-	}
-	printf ("\n");
-	return;
-}
-
-/*-----------------------------------------------------------------------
- */
-int flash_erase (flash_info_t * info, int s_first, int s_last)
-{
-	int flag, prot, sect, l_sect;
-	ulong start, now, last;
-
-	if ((s_first < 0) || (s_first > s_last)) {
-		if (info->flash_id == FLASH_UNKNOWN) {
-			printf ("- missing\n");
-		} else {
-			printf ("- no sectors to erase\n");
-		}
-		return 1;
-	}
-
-	prot = 0;
-	for (sect = s_first; sect <= s_last; sect++) {
-		if (info->protect[sect])
-			prot++;
-	}
-
-	if (prot) {
-		printf ("- Warning: %d protected sectors will not be erased!\n",
-			prot);
-	} else {
-		printf ("\n");
-	}
-
-	l_sect = -1;
-
-	/* Disable interrupts which might cause a timeout here */
-	flag = disable_interrupts ();
-
-	V_ULONG (info->start[0] + (0x0555 << 3)) = 0x00AA00AA;
-	V_ULONG (info->start[0] + (0x02AA << 3)) = 0x00550055;
-	V_ULONG (info->start[0] + (0x0555 << 3)) = 0x00800080;
-	V_ULONG (info->start[0] + (0x0555 << 3)) = 0x00AA00AA;
-	V_ULONG (info->start[0] + (0x02AA << 3)) = 0x00550055;
-	V_ULONG (info->start[0] + 4 + (0x0555 << 3)) = 0x00AA00AA;
-	V_ULONG (info->start[0] + 4 + (0x02AA << 3)) = 0x00550055;
-	V_ULONG (info->start[0] + 4 + (0x0555 << 3)) = 0x00800080;
-	V_ULONG (info->start[0] + 4 + (0x0555 << 3)) = 0x00AA00AA;
-	V_ULONG (info->start[0] + 4 + (0x02AA << 3)) = 0x00550055;
-	udelay (1000);
-
-	/* Start erase on unprotected sectors */
-	for (sect = s_first; sect <= s_last; sect++) {
-		if (info->protect[sect] == 0) {	/* not protected */
-			V_ULONG (info->start[sect]) = 0x00300030;
-			V_ULONG (info->start[sect] + 4) = 0x00300030;
-			l_sect = sect;
-		}
-	}
-
-	/* re-enable interrupts if necessary */
-	if (flag)
-		enable_interrupts ();
-
-	/* wait at least 80us - let's wait 1 ms */
-	udelay (1000);
-
-	/*
-	 * We wait for the last triggered sector
-	 */
-	if (l_sect < 0)
-		goto DONE;
-
-	start = get_timer (0);
-	last = start;
-	while ((V_ULONG (info->start[l_sect]) & 0x00800080) != 0x00800080 ||
-	       (V_ULONG (info->start[l_sect] + 4) & 0x00800080) != 0x00800080)
-	{
-		if ((now = get_timer (start)) > CFG_FLASH_ERASE_TOUT) {
-			printf ("Timeout\n");
-			return 1;
-		}
-		/* show that we're waiting */
-		if ((now - last) > 1000) {	/* every second */
-			serial_putc ('.');
-			last = now;
-		}
-	}
-
-  DONE:
-	/* reset to read mode */
-	flash_reset ();
-
-	printf (" done\n");
-	return 0;
-}
-
-static int write_dword (flash_info_t *, ulong, unsigned char *);
-
-/*-----------------------------------------------------------------------
- * Copy memory to flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-
-int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
-{
-	ulong dp;
-	static unsigned char bb[8];
-	int i, l, rc, cc = cnt;
-
-	dp = (addr & ~7);		/* get lower dword aligned address */
-
-	/*
-	 * handle unaligned start bytes
-	 */
-	if ((l = addr - dp) != 0) {
-		for (i = 0; i < 8; i++)
-			bb[i] = (i < l || (i - l) >= cc) ? V_BYTE (dp + i) : *src++;
-		if ((rc = write_dword (info, dp, bb)) != 0) {
-			return (rc);
-		}
-		dp += 8;
-		cc -= 8 - l;
-	}
-
-	/*
-	 * handle word aligned part
-	 */
-	while (cc >= 8) {
-		if ((rc = write_dword (info, dp, src)) != 0) {
-			return (rc);
-		}
-		dp += 8;
-		src += 8;
-		cc -= 8;
-	}
-
-	if (cc <= 0) {
-		return (0);
-	}
-
-	/*
-	 * handle unaligned tail bytes
-	 */
-	for (i = 0; i < 8; i++) {
-		bb[i] = (i < cc) ? *src++ : V_BYTE (dp + i);
-	}
-	return (write_dword (info, dp, bb));
-}
-
-/*-----------------------------------------------------------------------
- * Write a dword to Flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-static int write_dword (flash_info_t * info, ulong dest, unsigned char *pdata)
-{
-	ulong start, cl, ch;
-	int flag, i;
-
-	for (ch = 0, i = 0; i < 4; i++)
-		ch = (ch << 8) + *pdata++;	/* high word    */
-	for (cl = 0, i = 0; i < 4; i++)
-		cl = (cl << 8) + *pdata++;	/* low word */
-
-	/* Check if Flash is (sufficiently) erased */
-	if ((*((vu_long *) dest) & ch) != ch
-		|| (*((vu_long *) (dest + 4)) & cl) != cl) {
-		return (2);
-	}
-
-	/* Disable interrupts which might cause a timeout here */
-	flag = disable_interrupts ();
-
-	V_ULONG (info->start[0] + (0x0555 << 3)) = 0x00AA00AA;
-	V_ULONG (info->start[0] + (0x02AA << 3)) = 0x00550055;
-	V_ULONG (info->start[0] + (0x0555 << 3)) = 0x00A000A0;
-	V_ULONG (dest) = ch;
-	V_ULONG (info->start[0] + 4 + (0x0555 << 3)) = 0x00AA00AA;
-	V_ULONG (info->start[0] + 4 + (0x02AA << 3)) = 0x00550055;
-	V_ULONG (info->start[0] + 4 + (0x0555 << 3)) = 0x00A000A0;
-	V_ULONG (dest + 4) = cl;
-
-	/* re-enable interrupts if necessary */
-	if (flag)
-		enable_interrupts ();
-
-	/* data polling for D7 */
-	start = get_timer (0);
-	while (((V_ULONG (dest) & 0x00800080) != (ch & 0x00800080)) ||
-		   ((V_ULONG (dest + 4) & 0x00800080) != (cl & 0x00800080))) {
-		if (get_timer (start) > CFG_FLASH_WRITE_TOUT) {
-			return (1);
-		}
-	}
-	return (0);
-}
diff --git a/board/tqc/tqm8260/tqm8260.c b/board/tqc/tqm8260/tqm8260.c
index f201045d9..3039999f3 100644
--- a/board/tqc/tqm8260/tqm8260.c
+++ b/board/tqc/tqm8260/tqm8260.c
@@ -236,7 +236,7 @@ static long int try_init (volatile memctl8260_t * memctl, ulong sdmr,
 	 */
 	maxsize = (1 + (~orx | 0x7fff)) / 2;
 
-	/* Since CFG_SDRAM_BASE is always 0 (??), we assume that
+	/* Since CONFIG_SYS_SDRAM_BASE is always 0 (??), we assume that
 	 * we are configuring CS1 if base != 0
 	 */
 	sdmr_ptr = base ? &memctl->memc_lsdmr : &memctl->memc_psdmr;
@@ -261,7 +261,7 @@ static long int try_init (volatile memctl8260_t * memctl, ulong sdmr,
 	 *  accessing the SDRAM with a single-byte transaction."
 	 *
 	 * The appropriate BRx/ORx registers have already been set when we
-	 * get here. The SDRAM can be accessed at the address CFG_SDRAM_BASE.
+	 * get here. The SDRAM can be accessed at the address CONFIG_SYS_SDRAM_BASE.
 	 */
 
 	*sdmr_ptr = sdmr | PSDMR_OP_PREA;
@@ -272,7 +272,7 @@ static long int try_init (volatile memctl8260_t * memctl, ulong sdmr,
 		*base = c;
 
 	*sdmr_ptr = sdmr | PSDMR_OP_MRW;
-	*(base + CFG_MRS_OFFS) = c;	/* setting MR on address lines */
+	*(base + CONFIG_SYS_MRS_OFFS) = c;	/* setting MR on address lines */
 
 	*sdmr_ptr = sdmr | PSDMR_OP_NORM | PSDMR_RFEN;
 	*base = c;
@@ -285,10 +285,10 @@ static long int try_init (volatile memctl8260_t * memctl, ulong sdmr,
 
 phys_size_t initdram (int board_type)
 {
-	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
 	volatile memctl8260_t *memctl = &immap->im_memctl;
 
-#ifndef CFG_RAMBOOT
+#ifndef CONFIG_SYS_RAMBOOT
 	long size8, size9;
 #endif
 	long psize, lsize;
@@ -296,8 +296,8 @@ phys_size_t initdram (int board_type)
 	psize = 16 * 1024 * 1024;
 	lsize = 0;
 
-	memctl->memc_psrt = CFG_PSRT;
-	memctl->memc_mptpr = CFG_MPTPR;
+	memctl->memc_psrt = CONFIG_SYS_PSRT;
+	memctl->memc_mptpr = CONFIG_SYS_MPTPR;
 
 #if 0							/* Just for debugging */
 #define	prt_br_or(brX,orX) do {				\
@@ -315,37 +315,37 @@ phys_size_t initdram (int board_type)
 	prt_br_or (br3, or3);
 #endif
 
-#ifndef CFG_RAMBOOT
+#ifndef CONFIG_SYS_RAMBOOT
 	/* 60x SDRAM setup:
 	 */
-	size8 = try_init (memctl, CFG_PSDMR_8COL, CFG_OR1_8COL,
-					  (uchar *) CFG_SDRAM_BASE);
-	size9 = try_init (memctl, CFG_PSDMR_9COL, CFG_OR1_9COL,
-					  (uchar *) CFG_SDRAM_BASE);
+	size8 = try_init (memctl, CONFIG_SYS_PSDMR_8COL, CONFIG_SYS_OR1_8COL,
+					  (uchar *) CONFIG_SYS_SDRAM_BASE);
+	size9 = try_init (memctl, CONFIG_SYS_PSDMR_9COL, CONFIG_SYS_OR1_9COL,
+					  (uchar *) CONFIG_SYS_SDRAM_BASE);
 
 	if (size8 < size9) {
 		psize = size9;
 		printf ("(60x:9COL - %ld MB, ", psize >> 20);
 	} else {
-		psize = try_init (memctl, CFG_PSDMR_8COL, CFG_OR1_8COL,
-						  (uchar *) CFG_SDRAM_BASE);
+		psize = try_init (memctl, CONFIG_SYS_PSDMR_8COL, CONFIG_SYS_OR1_8COL,
+						  (uchar *) CONFIG_SYS_SDRAM_BASE);
 		printf ("(60x:8COL - %ld MB, ", psize >> 20);
 	}
 
 	/* Local SDRAM setup:
 	 */
-#ifdef CFG_INIT_LOCAL_SDRAM
-	memctl->memc_lsrt = CFG_LSRT;
-	size8 = try_init (memctl, CFG_LSDMR_8COL, CFG_OR2_8COL,
+#ifdef CONFIG_SYS_INIT_LOCAL_SDRAM
+	memctl->memc_lsrt = CONFIG_SYS_LSRT;
+	size8 = try_init (memctl, CONFIG_SYS_LSDMR_8COL, CONFIG_SYS_OR2_8COL,
 					  (uchar *) SDRAM_BASE2_PRELIM);
-	size9 = try_init (memctl, CFG_LSDMR_9COL, CFG_OR2_9COL,
+	size9 = try_init (memctl, CONFIG_SYS_LSDMR_9COL, CONFIG_SYS_OR2_9COL,
 					  (uchar *) SDRAM_BASE2_PRELIM);
 
 	if (size8 < size9) {
 		lsize = size9;
 		printf ("Local:9COL - %ld MB) using ", lsize >> 20);
 	} else {
-		lsize = try_init (memctl, CFG_LSDMR_8COL, CFG_OR2_8COL,
+		lsize = try_init (memctl, CONFIG_SYS_LSDMR_8COL, CONFIG_SYS_OR2_8COL,
 						  (uchar *) SDRAM_BASE2_PRELIM);
 		printf ("Local:8COL - %ld MB) using ", lsize >> 20);
 	}
@@ -354,11 +354,11 @@ phys_size_t initdram (int board_type)
 	/* Set up BR2 so that the local SDRAM goes
 	 * right after the 60x SDRAM
 	 */
-	memctl->memc_br2 = (CFG_BR2_PRELIM & ~BRx_BA_MSK) |
-			(CFG_SDRAM_BASE + psize);
+	memctl->memc_br2 = (CONFIG_SYS_BR2_PRELIM & ~BRx_BA_MSK) |
+			(CONFIG_SYS_SDRAM_BASE + psize);
 #endif
-#endif /* CFG_INIT_LOCAL_SDRAM */
-#endif /* CFG_RAMBOOT */
+#endif /* CONFIG_SYS_INIT_LOCAL_SDRAM */
+#endif /* CONFIG_SYS_RAMBOOT */
 
 	icache_enable ();
 
diff --git a/board/tqc/tqm8272/Makefile b/board/tqc/tqm8272/Makefile
index 673026351..c97fe1496 100644
--- a/board/tqc/tqm8272/Makefile
+++ b/board/tqc/tqm8272/Makefile
@@ -28,7 +28,7 @@ endif
 
 LIB	= $(obj)lib$(BOARD).a
 
-COBJS	= $(BOARD).o ../tqm8xx/load_sernum_ethaddr.o
+COBJS	= $(BOARD).o ../tqm8xx/load_sernum_ethaddr.o nand.o
 
 SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
 OBJS	:= $(addprefix $(obj),$(COBJS))
diff --git a/board/tqc/tqm8272/config.mk b/board/tqc/tqm8272/config.mk
index af7a81e33..05c5f0cb8 100644
--- a/board/tqc/tqm8272/config.mk
+++ b/board/tqc/tqm8272/config.mk
@@ -25,7 +25,7 @@
 # TQM8272 boards
 #
 
-# This should be equal to the CFG_FLASH_BASE define in config_TQM8260.h
+# This should be equal to the CONFIG_SYS_FLASH_BASE define in config_TQM8260.h
 # for the "final" configuration, with U-Boot in flash, or the address
 # in RAM where U-Boot is loaded at for debugging.
 #
diff --git a/board/tqc/tqm8272/nand.c b/board/tqc/tqm8272/nand.c
new file mode 100644
index 000000000..8c8341b5a
--- /dev/null
+++ b/board/tqc/tqm8272/nand.c
@@ -0,0 +1,276 @@
+/*
+ * (C) Copyright 2008
+ * Heiko Schocher, DENX Software Engineering, hs@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <ioports.h>
+#include <mpc8260.h>
+
+#include "tqm8272.h"
+
+/* UPM pattern for bus clock = 66.7 MHz */
+static const uint upmTable67[] =
+{
+    /* Offset	UPM Read Single RAM array entry -> NAND Read Data */
+    /* 0x00 */	0x0fa3f100, 0x0fa3b000, 0x0fa33100, 0x0fa33000,
+    /* 0x04 */	0x0fa33000, 0x0fa33004, 0xfffffc01, 0xfffffc00,
+
+		/* UPM Read Burst RAM array entry -> unused */
+    /* 0x08 */	0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
+    /* 0x0C */	0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
+
+		/* UPM Read Burst RAM array entry -> unused */
+    /* 0x10 */	0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
+    /* 0x14 */	0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
+
+		/* UPM Write Single RAM array entry -> NAND Write Data, ADDR and CMD */
+    /* 0x18 */	0x00a3fc00, 0x00a3fc00, 0x00a3fc00, 0x00a3fc00,
+    /* 0x1C */	0x0fa3fc00, 0x0fa3fc04, 0xfffffc01, 0xfffffc00,
+
+		/* UPM Write Burst RAM array entry -> unused */
+    /* 0x20 */	0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
+    /* 0x24 */	0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
+    /* 0x28 */	0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
+    /* 0x2C */	0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
+
+		/* UPM Refresh Timer RAM array entry -> unused */
+    /* 0x30 */	0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
+    /* 0x34 */	0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
+    /* 0x38 */	0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
+
+		/* UPM Exception RAM array entry -> unsused */
+    /* 0x3C */	0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
+};
+
+/* UPM pattern for bus clock = 100 MHz */
+static const uint upmTable100[] =
+{
+    /* Offset	UPM Read Single RAM array entry -> NAND Read Data */
+    /* 0x00 */	0x0fa3f200, 0x0fa3b000, 0x0fa33300, 0x0fa33000,
+    /* 0x04 */	0x0fa33000, 0x0fa33004, 0xfffffc01, 0xfffffc00,
+
+		/* UPM Read Burst RAM array entry -> unused */
+    /* 0x08 */	0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
+    /* 0x0C */	0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
+
+		/* UPM Read Burst RAM array entry -> unused */
+    /* 0x10 */	0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
+    /* 0x14 */	0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
+
+		/* UPM Write Single RAM array entry -> NAND Write Data, ADDR and CMD */
+    /* 0x18 */	0x00a3ff00, 0x00a3fc00, 0x00a3fc00, 0x0fa3fc00,
+    /* 0x1C */	0x0fa3fc00, 0x0fa3fc04, 0xfffffc01, 0xfffffc00,
+
+		/* UPM Write Burst RAM array entry -> unused */
+    /* 0x20 */	0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
+    /* 0x24 */	0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
+    /* 0x28 */	0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
+    /* 0x2C */	0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
+
+		/* UPM Refresh Timer RAM array entry -> unused */
+    /* 0x30 */	0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
+    /* 0x34 */	0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
+    /* 0x38 */	0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
+
+		/* UPM Exception RAM array entry -> unsused */
+    /* 0x3C */	0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
+};
+
+/* UPM pattern for bus clock = 133.3 MHz */
+static const uint upmTable133[] =
+{
+    /* Offset	UPM Read Single RAM array entry -> NAND Read Data */
+    /* 0x00 */	0x0fa3f300, 0x0fa3b000, 0x0fa33300, 0x0fa33000,
+    /* 0x04 */	0x0fa33200, 0x0fa33004, 0xfffffc01, 0xfffffc00,
+
+		/* UPM Read Burst RAM array entry -> unused */
+    /* 0x08 */	0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
+    /* 0x0C */	0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
+
+		/* UPM Read Burst RAM array entry -> unused */
+    /* 0x10 */	0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
+    /* 0x14 */	0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
+
+		/* UPM Write Single RAM array entry -> NAND Write Data, ADDR and CMD */
+    /* 0x18 */	0x00a3ff00, 0x00a3fc00, 0x00a3fd00, 0x0fa3fc00,
+    /* 0x1C */	0x0fa3fd00, 0x0fa3fc04, 0xfffffc01, 0xfffffc00,
+
+		/* UPM Write Burst RAM array entry -> unused */
+    /* 0x20 */	0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
+    /* 0x24 */	0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
+    /* 0x28 */	0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
+    /* 0x2C */	0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
+
+		/* UPM Refresh Timer RAM array entry -> unused */
+    /* 0x30 */	0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
+    /* 0x34 */	0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
+    /* 0x38 */	0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
+
+		/* UPM Exception RAM array entry -> unsused */
+    /* 0x3C */	0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
+};
+
+static int	chipsel = 0;
+
+#if defined(CONFIG_CMD_NAND)
+
+#include <nand.h>
+#include <linux/mtd/mtd.h>
+
+static u8 hwctl = 0;
+
+static void upmnand_write_byte(struct mtd_info *mtdinfo, u_char byte)
+{
+	struct nand_chip *this = mtdinfo->priv;
+	ulong base = (ulong) (this->IO_ADDR_W + chipsel * CONFIG_SYS_NAND_CS_DIST);
+
+	if (hwctl & 0x1) {
+		WRITE_NAND_UPM(byte, base, CONFIG_SYS_NAND_UPM_WRITE_CMD_OFS);
+	} else if (hwctl & 0x2) {
+		WRITE_NAND_UPM(byte, base, CONFIG_SYS_NAND_UPM_WRITE_ADDR_OFS);
+	} else {
+		WRITE_NAND(byte, base);
+	}
+}
+
+static void upmnand_hwcontrol(struct mtd_info *mtd, int cmd, unsigned int ctrl)
+{
+	if (ctrl & NAND_CTRL_CHANGE) {
+		if ( ctrl & NAND_CLE )
+			hwctl |= 0x1;
+		else
+			hwctl &= ~0x1;
+		if ( ctrl & NAND_ALE )
+			hwctl |= 0x2;
+		else
+			hwctl &= ~0x2;
+	}
+	if (cmd != NAND_CMD_NONE)
+		upmnand_write_byte (mtd, cmd);
+}
+
+static u_char upmnand_read_byte(struct mtd_info *mtdinfo)
+{
+	struct nand_chip *this = mtdinfo->priv;
+	ulong base = (ulong) (this->IO_ADDR_W + chipsel * CONFIG_SYS_NAND_CS_DIST);
+
+	return READ_NAND(base);
+}
+
+static int tqm8272_dev_ready(struct mtd_info *mtdinfo)
+{
+	/* constant delay (see also tR in the datasheet) */
+	udelay(12); \
+	return 1;
+}
+
+#ifndef CONFIG_NAND_SPL
+static void tqm8272_read_buf(struct mtd_info *mtdinfo, uint8_t *buf, int len)
+{
+	struct nand_chip *this = mtdinfo->priv;
+	unsigned char *base = (unsigned char *) (this->IO_ADDR_W + chipsel * CONFIG_SYS_NAND_CS_DIST);
+	int	i;
+
+	for (i = 0; i< len; i++)
+		buf[i] = *base;
+}
+
+static void tqm8272_write_buf(struct mtd_info *mtdinfo, const uint8_t *buf, int len)
+{
+	struct nand_chip *this = mtdinfo->priv;
+	unsigned char *base = (unsigned char *) (this->IO_ADDR_W + chipsel * CONFIG_SYS_NAND_CS_DIST);
+	int	i;
+
+	for (i = 0; i< len; i++)
+		*base = buf[i];
+}
+
+static int tqm8272_verify_buf(struct mtd_info *mtdinfo, const uint8_t *buf, int len)
+{
+	struct nand_chip *this = mtdinfo->priv;
+	unsigned char *base = (unsigned char *) (this->IO_ADDR_W + chipsel * CONFIG_SYS_NAND_CS_DIST);
+	int	i;
+
+	for (i = 0; i < len; i++)
+		if (buf[i] != *base)
+			return -1;
+	return 0;
+}
+#endif /* #ifndef CONFIG_NAND_SPL */
+
+void board_nand_select_device(struct nand_chip *nand, int chip)
+{
+	chipsel = chip;
+}
+
+int board_nand_init(struct nand_chip *nand)
+{
+	static	int	UpmInit = 0;
+	volatile immap_t * immr = (immap_t *)CONFIG_SYS_IMMR;
+	volatile memctl8260_t *memctl = &immr->im_memctl;
+
+	if (hwinf.nand == 0) return -1;
+
+	/* Setup the UPM */
+	if (UpmInit == 0) {
+		switch (hwinf.busclk_real) {
+		case 100000000:
+			upmconfig (UPMB, (uint *) upmTable100,
+			   sizeof (upmTable100) / sizeof (uint));
+			break;
+		case 133333333:
+			upmconfig (UPMB, (uint *) upmTable133,
+			   sizeof (upmTable133) / sizeof (uint));
+			break;
+		default:
+			upmconfig (UPMB, (uint *) upmTable67,
+			   sizeof (upmTable67) / sizeof (uint));
+			break;
+		}
+		UpmInit = 1;
+	}
+
+	/* Setup the memctrl */
+	memctl->memc_or3 = CONFIG_SYS_NAND_OR;
+	memctl->memc_br3 = CONFIG_SYS_NAND_BR;
+	memctl->memc_mbmr = (MxMR_OP_NORM);
+
+	nand->ecc.mode = NAND_ECC_SOFT;
+
+	nand->cmd_ctrl	 = upmnand_hwcontrol;
+	nand->read_byte	 = upmnand_read_byte;
+	nand->dev_ready	 = tqm8272_dev_ready;
+
+#ifndef CONFIG_NAND_SPL
+	nand->write_buf	 = tqm8272_write_buf;
+	nand->read_buf	 = tqm8272_read_buf;
+	nand->verify_buf = tqm8272_verify_buf;
+#endif
+
+	/*
+	 * Select required NAND chip
+	 */
+	board_nand_select_device(nand, 0);
+	return 0;
+}
+
+#endif
diff --git a/board/tqc/tqm8272/tqm8272.c b/board/tqc/tqm8272/tqm8272.c
index a0ec254ce..5d0741d80 100644
--- a/board/tqc/tqm8272/tqm8272.c
+++ b/board/tqc/tqm8272/tqm8272.c
@@ -26,10 +26,12 @@
 #include <mpc8260.h>
 
 #include <command.h>
+#include <netdev.h>
 #ifdef CONFIG_PCI
 #include <pci.h>
 #include <asm/m8260_pci.h>
 #endif
+#include "tqm8272.h"
 
 #if 0
 #define deb_printf(fmt,arg...) \
@@ -207,112 +209,6 @@ const iop_conf_t iop_conf_tab[4][32] = {
     }
 };
 
-#define _NOT_USED_	0xFFFFFFFF
-
-/* UPM pattern for bus clock = 66.7 MHz */
-static const uint upmTable67[] =
-{
-    /* Offset	UPM Read Single RAM array entry -> NAND Read Data */
-    /* 0x00 */	0x0fa3f100, 0x0fa3b000, 0x0fa33100, 0x0fa33000,
-    /* 0x04 */	0x0fa33000, 0x0fa33004, 0xfffffc01, 0xfffffc00,
-
-		/* UPM Read Burst RAM array entry -> unused */
-    /* 0x08 */	0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
-    /* 0x0C */	0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
-
-		/* UPM Read Burst RAM array entry -> unused */
-    /* 0x10 */	0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
-    /* 0x14 */	0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
-
-		/* UPM Write Single RAM array entry -> NAND Write Data, ADDR and CMD */
-    /* 0x18 */	0x00a3fc00, 0x00a3fc00, 0x00a3fc00, 0x00a3fc00,
-    /* 0x1C */	0x0fa3fc00, 0x0fa3fc04, 0xfffffc01, 0xfffffc00,
-
-		/* UPM Write Burst RAM array entry -> unused */
-    /* 0x20 */	0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
-    /* 0x24 */	0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
-    /* 0x28 */	0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
-    /* 0x2C */	0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
-
-		/* UPM Refresh Timer RAM array entry -> unused */
-    /* 0x30 */	0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
-    /* 0x34 */	0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
-    /* 0x38 */	0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
-
-		/* UPM Exception RAM array entry -> unsused */
-    /* 0x3C */	0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
-};
-
-/* UPM pattern for bus clock = 100 MHz */
-static const uint upmTable100[] =
-{
-    /* Offset	UPM Read Single RAM array entry -> NAND Read Data */
-    /* 0x00 */	0x0fa3f200, 0x0fa3b000, 0x0fa33300, 0x0fa33000,
-    /* 0x04 */	0x0fa33000, 0x0fa33004, 0xfffffc01, 0xfffffc00,
-
-		/* UPM Read Burst RAM array entry -> unused */
-    /* 0x08 */	0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
-    /* 0x0C */	0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
-
-		/* UPM Read Burst RAM array entry -> unused */
-    /* 0x10 */	0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
-    /* 0x14 */	0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
-
-		/* UPM Write Single RAM array entry -> NAND Write Data, ADDR and CMD */
-    /* 0x18 */	0x00a3ff00, 0x00a3fc00, 0x00a3fc00, 0x0fa3fc00,
-    /* 0x1C */	0x0fa3fc00, 0x0fa3fc04, 0xfffffc01, 0xfffffc00,
-
-		/* UPM Write Burst RAM array entry -> unused */
-    /* 0x20 */	0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
-    /* 0x24 */	0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
-    /* 0x28 */	0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
-    /* 0x2C */	0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
-
-		/* UPM Refresh Timer RAM array entry -> unused */
-    /* 0x30 */	0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
-    /* 0x34 */	0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
-    /* 0x38 */	0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
-
-		/* UPM Exception RAM array entry -> unsused */
-    /* 0x3C */	0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
-};
-
-/* UPM pattern for bus clock = 133.3 MHz */
-static const uint upmTable133[] =
-{
-    /* Offset	UPM Read Single RAM array entry -> NAND Read Data */
-    /* 0x00 */	0x0fa3f300, 0x0fa3b000, 0x0fa33300, 0x0fa33000,
-    /* 0x04 */	0x0fa33200, 0x0fa33004, 0xfffffc01, 0xfffffc00,
-
-		/* UPM Read Burst RAM array entry -> unused */
-    /* 0x08 */	0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
-    /* 0x0C */	0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
-
-		/* UPM Read Burst RAM array entry -> unused */
-    /* 0x10 */	0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
-    /* 0x14 */	0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
-
-		/* UPM Write Single RAM array entry -> NAND Write Data, ADDR and CMD */
-    /* 0x18 */	0x00a3ff00, 0x00a3fc00, 0x00a3fd00, 0x0fa3fc00,
-    /* 0x1C */	0x0fa3fd00, 0x0fa3fc04, 0xfffffc01, 0xfffffc00,
-
-		/* UPM Write Burst RAM array entry -> unused */
-    /* 0x20 */	0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
-    /* 0x24 */	0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
-    /* 0x28 */	0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
-    /* 0x2C */	0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
-
-		/* UPM Refresh Timer RAM array entry -> unused */
-    /* 0x30 */	0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
-    /* 0x34 */	0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
-    /* 0x38 */	0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
-
-		/* UPM Exception RAM array entry -> unsused */
-    /* 0x3C */	0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
-};
-
-static int	chipsel = 0;
-
 /* UPM pattern for slow init */
 static const uint upmTableSlow[] =
 {
@@ -391,7 +287,7 @@ int checkboard (void)
 	char *p = (char *) HWIB_INFO_START_ADDR;
 
 	puts ("Board: ");
-	if (*((unsigned long *)p) == (unsigned long)CFG_HWINFO_MAGIC) {
+	if (*((unsigned long *)p) == (unsigned long)CONFIG_SYS_HWINFO_MAGIC) {
 		puts (p);
 	} else {
 		puts ("No HWIB assuming TQM8272");
@@ -431,7 +327,7 @@ static ulong set_sdram_timing (volatile uint *sdmr_ptr, ulong sdmr, int col)
 {
 #if defined(CONFIG_BOARD_GET_CPU_CLK_F)
 	int	clk = board_get_cpu_clk_f ();
-	volatile immap_t *immr = (immap_t *)CFG_IMMR;
+	volatile immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
 	int	busmode = (immr->im_siu_conf.sc_bcr & BCR_EBM ? 1 : 0);
 	int	cas;
 
@@ -508,7 +404,7 @@ static long int try_init (volatile memctl8260_t * memctl, ulong sdmr,
 	 */
 	maxsize = (1 + (~orx | 0x7fff)) / 2;
 
-	/* Since CFG_SDRAM_BASE is always 0 (??), we assume that
+	/* Since CONFIG_SYS_SDRAM_BASE is always 0 (??), we assume that
 	 * we are configuring CS1 if base != 0
 	 */
 	sdmr_ptr = base ? &memctl->memc_lsdmr : &memctl->memc_psdmr;
@@ -533,7 +429,7 @@ static long int try_init (volatile memctl8260_t * memctl, ulong sdmr,
 	 *  accessing the SDRAM with a single-byte transaction."
 	 *
 	 * The appropriate BRx/ORx registers have already been set when we
-	 * get here. The SDRAM can be accessed at the address CFG_SDRAM_BASE.
+	 * get here. The SDRAM can be accessed at the address CONFIG_SYS_SDRAM_BASE.
 	 */
 
 	*sdmr_ptr = sdmr | PSDMR_OP_PREA;
@@ -544,7 +440,7 @@ static long int try_init (volatile memctl8260_t * memctl, ulong sdmr,
 		*base = c;
 
 	*sdmr_ptr = sdmr | PSDMR_OP_MRW;
-	*(base + CFG_MRS_OFFS) = c;	/* setting MR on address lines */
+	*(base + CONFIG_SYS_MRS_OFFS) = c;	/* setting MR on address lines */
 
 	*sdmr_ptr = sdmr | PSDMR_OP_NORM | PSDMR_RFEN;
 	*base = c;
@@ -557,10 +453,10 @@ static long int try_init (volatile memctl8260_t * memctl, ulong sdmr,
 
 phys_size_t initdram (int board_type)
 {
-	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
 	volatile memctl8260_t *memctl = &immap->im_memctl;
 
-#ifndef CFG_RAMBOOT
+#ifndef CONFIG_SYS_RAMBOOT
 	long size8, size9;
 #endif
 	long psize, lsize;
@@ -568,27 +464,27 @@ phys_size_t initdram (int board_type)
 	psize = 16 * 1024 * 1024;
 	lsize = 0;
 
-	memctl->memc_psrt = CFG_PSRT;
-	memctl->memc_mptpr = CFG_MPTPR;
+	memctl->memc_psrt = CONFIG_SYS_PSRT;
+	memctl->memc_mptpr = CONFIG_SYS_MPTPR;
 
-#ifndef CFG_RAMBOOT
+#ifndef CONFIG_SYS_RAMBOOT
 	/* 60x SDRAM setup:
 	 */
-	size8 = try_init (memctl, CFG_PSDMR_8COL, CFG_OR1_8COL,
-					  (uchar *) CFG_SDRAM_BASE, 8);
-	size9 = try_init (memctl, CFG_PSDMR_9COL, CFG_OR1_9COL,
-					  (uchar *) CFG_SDRAM_BASE, 9);
+	size8 = try_init (memctl, CONFIG_SYS_PSDMR_8COL, CONFIG_SYS_OR1_8COL,
+					  (uchar *) CONFIG_SYS_SDRAM_BASE, 8);
+	size9 = try_init (memctl, CONFIG_SYS_PSDMR_9COL, CONFIG_SYS_OR1_9COL,
+					  (uchar *) CONFIG_SYS_SDRAM_BASE, 9);
 
 	if (size8 < size9) {
 		psize = size9;
 		printf ("(60x:9COL - %ld MB, ", psize >> 20);
 	} else {
-		psize = try_init (memctl, CFG_PSDMR_8COL, CFG_OR1_8COL,
-						  (uchar *) CFG_SDRAM_BASE, 8);
+		psize = try_init (memctl, CONFIG_SYS_PSDMR_8COL, CONFIG_SYS_OR1_8COL,
+						  (uchar *) CONFIG_SYS_SDRAM_BASE, 8);
 		printf ("(60x:8COL - %ld MB, ", psize >> 20);
 	}
 
-#endif /* CFG_RAMBOOT */
+#endif /* CONFIG_SYS_RAMBOOT */
 
 	icache_enable ();
 
@@ -615,35 +511,10 @@ static inline int scanChar (char *p, int len, unsigned long *number)
 	return akt;
 }
 
-typedef struct{
-	int	Bus;
-	int	flash;
-	int	flash_nr;
-	int	ram;
-	int	ram_cs;
-	int	nand;
-	int	nand_cs;
-	int	eeprom;
-	int	can;
-	unsigned long	cpunr;
-	unsigned long	option;
-	int	SecEng;
-	int	cpucl;
-	int	cpmcl;
-	int	buscl;
-	int	busclk_real_ok;
-	int	busclk_real;
-	unsigned char	OK;
-	unsigned char  ethaddr[20];
-} HWIB_INFO;
-
-HWIB_INFO	hwinf = {0, 0, 1, 0, 1, 0, 0, 0, 0, 8272, 0 ,0,
-			 0, 0, 0, 0, 0, 0};
-
 static int dump_hwib(void)
 {
 	HWIB_INFO	*hw = &hwinf;
-	volatile immap_t *immr = (immap_t *)CFG_IMMR;
+	volatile immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
 	char *s = getenv("serial#");
 
 	if (hw->OK) {
@@ -736,7 +607,7 @@ int analyse_hwib (void)
 
 	deb_printf(" %s pointer: %p\n", __FUNCTION__, p);
 	/* Head = TQM */
-	if (*((unsigned long *)p) != (unsigned long)CFG_HWINFO_MAGIC) {
+	if (*((unsigned long *)p) != (unsigned long)CONFIG_SYS_HWINFO_MAGIC) {
 		deb_printf("No HWIB\n");
 		return -1;
 	}
@@ -833,7 +704,7 @@ int analyse_hwib (void)
 
 	hw->OK = 1;
 	/* search MAC Address */
-	while ((*p != '\0') && (pos < CFG_HWINFO_SIZE)) {
+	while ((*p != '\0') && (pos < CONFIG_SYS_HWINFO_SIZE)) {
 		if (*p < ' ' || *p > '~') { /* ASCII strings! */
 			return 0;
 		}
@@ -873,7 +744,7 @@ char get_cpu_str_f (char *buf)
 	buf[i++] = 'M';
 	buf[i++] = 'P';
 	buf[i++] = 'C';
-	if (*((unsigned long *)p) == (unsigned long)CFG_HWINFO_MAGIC) {
+	if (*((unsigned long *)p) == (unsigned long)CONFIG_SYS_HWINFO_MAGIC) {
 		buf[i++] = *&p[3];
 		buf[i++] = *&p[4];
 		buf[i++] = *&p[5];
@@ -896,7 +767,7 @@ unsigned long board_get_cpu_clk_f (void)
 	char *p = (char *) HWIB_INFO_START_ADDR;
 	int i = 0;
 
-	if (*((unsigned long *)p) == (unsigned long)CFG_HWINFO_MAGIC) {
+	if (*((unsigned long *)p) == (unsigned long)CONFIG_SYS_HWINFO_MAGIC) {
 		if (search_real_busclk (&i))
 			return i;
 	}
@@ -908,7 +779,7 @@ unsigned long board_get_cpu_clk_f (void)
 
 static int can_test (unsigned long off)
 {
-	volatile unsigned char	*base	= (unsigned char *) (CFG_CAN_BASE + off);
+	volatile unsigned char	*base	= (unsigned char *) (CONFIG_SYS_CAN_BASE + off);
 
 	*(base + 0x17) = 'T';
 	*(base + 0x18) = 'Q';
@@ -923,9 +794,9 @@ static int can_test (unsigned long off)
 
 static int can_config_one (unsigned long off)
 {
-	volatile unsigned char	*ctrl	= (unsigned char *) (CFG_CAN_BASE + off);
-	volatile unsigned char	*cpu_if = (unsigned char *) (CFG_CAN_BASE + off + 0x02);
-	volatile unsigned char	*clkout = (unsigned char *) (CFG_CAN_BASE + off + 0x1f);
+	volatile unsigned char	*ctrl	= (unsigned char *) (CONFIG_SYS_CAN_BASE + off);
+	volatile unsigned char	*cpu_if = (unsigned char *) (CONFIG_SYS_CAN_BASE + off + 0x02);
+	volatile unsigned char	*clkout = (unsigned char *) (CONFIG_SYS_CAN_BASE + off + 0x1f);
 	unsigned char temp;
 
 	*cpu_if = 0x45;
@@ -954,13 +825,13 @@ static int can_config (void)
 
 static int init_can (void)
 {
-	volatile immap_t * immr = (immap_t *)CFG_IMMR;
+	volatile immap_t * immr = (immap_t *)CONFIG_SYS_IMMR;
 	volatile memctl8260_t *memctl = &immr->im_memctl;
 	int	count = 0;
 
 	if ((hwinf.OK) && (hwinf.can)) {
-		memctl->memc_or4 = CFG_CAN_OR;
-		memctl->memc_br4 = CFG_CAN_BR;
+		memctl->memc_or4 = CONFIG_SYS_CAN_OR;
+		memctl->memc_br4 = CONFIG_SYS_CAN_BR;
 		/* upm Init */
 		upmconfig (UPMC, (uint *) upmTableFast,
 			   sizeof (upmTableFast) / sizeof (uint));
@@ -971,7 +842,7 @@ static int init_can (void)
 					MxMR_OP_NORM);
 		/* can configure */
 		count = can_config ();
-		printf ("CAN:	%d @ %x\n", count, CFG_CAN_BASE);
+		printf ("CAN:	%d @ %x\n", count, CONFIG_SYS_CAN_BASE);
 		if (hwinf.can != count) printf("!!! difference to HWIB\n");
 	} else {
 		printf ("CAN:	No\n");
@@ -999,7 +870,7 @@ U_BOOT_CMD(
 	  "\n"
 );
 
-#ifdef CFG_UPDATE_FLASH_SIZE
+#ifdef CONFIG_SYS_UPDATE_FLASH_SIZE
 static int get_flash_timing (void)
 {
 	/* get it from the option -tf in CIB */
@@ -1044,7 +915,7 @@ static int get_flash_timing (void)
 /* Update the Flash_Size and the Flash Timing */
 int update_flash_size (int flash_size)
 {
-	volatile immap_t * immr = (immap_t *)CFG_IMMR;
+	volatile immap_t * immr = (immap_t *)CONFIG_SYS_IMMR;
 	volatile memctl8260_t *memctl = &immr->im_memctl;
 	unsigned long reg;
 	unsigned long tim;
@@ -1061,159 +932,12 @@ int update_flash_size (int flash_size)
 }
 #endif
 
-#if defined(CONFIG_CMD_NAND)
-
-#include <nand.h>
-#include <linux/mtd/mtd.h>
-
-static u8 hwctl = 0;
-
-static void upmnand_hwcontrol(struct mtd_info *mtd, int cmd, unsigned int ctrl)
-{
-	struct nand_chip *this = mtd->priv;
-
-	if (ctrl & NAND_CTRL_CHANGE) {
-		if ( ctrl & NAND_CLE )
-			hwctl |= 0x1;
-		else
-			hwctl &= ~0x1;
-		if ( ctrl & NAND_ALE )
-			hwctl |= 0x2;
-		else
-			hwctl &= ~0x2;
-	}
-	if (cmd != NAND_CMD_NONE)
-		writeb(cmd, this->IO_ADDR_W);
-}
-
-static void upmnand_write_byte(struct mtd_info *mtdinfo, u_char byte)
-{
-	struct nand_chip *this = mtdinfo->priv;
-	ulong base = (ulong) (this->IO_ADDR_W + chipsel * CFG_NAND_CS_DIST);
-
-	if (hwctl & 0x1) {
-		WRITE_NAND_UPM(byte, base, CFG_NAND_UPM_WRITE_CMD_OFS);
-	} else if (hwctl & 0x2) {
-		WRITE_NAND_UPM(byte, base, CFG_NAND_UPM_WRITE_ADDR_OFS);
-	} else {
-		WRITE_NAND(byte, base);
-	}
-}
-
-static u_char upmnand_read_byte(struct mtd_info *mtdinfo)
-{
-	struct nand_chip *this = mtdinfo->priv;
-	ulong base = (ulong) (this->IO_ADDR_W + chipsel * CFG_NAND_CS_DIST);
-
-	return READ_NAND(base);
-}
-
-static int tqm8272_dev_ready(struct mtd_info *mtdinfo)
-{
-	/* constant delay (see also tR in the datasheet) */
-	udelay(12); \
-	return 1;
-}
-
-#ifndef CONFIG_NAND_SPL
-static void tqm8272_read_buf(struct mtd_info *mtdinfo, uint8_t *buf, int len)
-{
-	struct nand_chip *this = mtdinfo->priv;
-	unsigned char *base = (unsigned char *) (this->IO_ADDR_W + chipsel * CFG_NAND_CS_DIST);
-	int	i;
-
-	for (i = 0; i< len; i++)
-		buf[i] = *base;
-}
-
-static void tqm8272_write_buf(struct mtd_info *mtdinfo, const uint8_t *buf, int len)
-{
-	struct nand_chip *this = mtdinfo->priv;
-	unsigned char *base = (unsigned char *) (this->IO_ADDR_W + chipsel * CFG_NAND_CS_DIST);
-	int	i;
-
-	for (i = 0; i< len; i++)
-		*base = buf[i];
-}
-
-static int tqm8272_verify_buf(struct mtd_info *mtdinfo, const uint8_t *buf, int len)
-{
-	struct nand_chip *this = mtdinfo->priv;
-	unsigned char *base = (unsigned char *) (this->IO_ADDR_W + chipsel * CFG_NAND_CS_DIST);
-	int	i;
-
-	for (i = 0; i < len; i++)
-		if (buf[i] != *base)
-			return -1;
-	return 0;
-}
-#endif /* #ifndef CONFIG_NAND_SPL */
-
-void board_nand_select_device(struct nand_chip *nand, int chip)
-{
-	chipsel = chip;
-}
-
-int board_nand_init(struct nand_chip *nand)
-{
-	static	int	UpmInit = 0;
-	volatile immap_t * immr = (immap_t *)CFG_IMMR;
-	volatile memctl8260_t *memctl = &immr->im_memctl;
-
-	if (hwinf.nand == 0) return -1;
-
-	/* Setup the UPM */
-	if (UpmInit == 0) {
-		switch (hwinf.busclk_real) {
-		case 100000000:
-			upmconfig (UPMB, (uint *) upmTable100,
-			   sizeof (upmTable100) / sizeof (uint));
-			break;
-		case 133333333:
-			upmconfig (UPMB, (uint *) upmTable133,
-			   sizeof (upmTable133) / sizeof (uint));
-			break;
-		default:
-			upmconfig (UPMB, (uint *) upmTable67,
-			   sizeof (upmTable67) / sizeof (uint));
-			break;
-		}
-		UpmInit = 1;
-	}
-
-	/* Setup the memctrl */
-	memctl->memc_or3 = CFG_NAND_OR;
-	memctl->memc_br3 = CFG_NAND_BR;
-	memctl->memc_mbmr = (MxMR_OP_NORM);
-
-	nand->ecc.mode = NAND_ECC_SOFT;
-
-	nand->cmd_ctrl	 = upmnand_hwcontrol;
-	nand->read_byte	 = upmnand_read_byte;
-	nand->write_byte = upmnand_write_byte;
-	nand->dev_ready	 = tqm8272_dev_ready;
-
-#ifndef CONFIG_NAND_SPL
-	nand->write_buf	 = tqm8272_write_buf;
-	nand->read_buf	 = tqm8272_read_buf;
-	nand->verify_buf = tqm8272_verify_buf;
-#endif
-
-	/*
-	 * Select required NAND chip
-	 */
-	board_nand_select_device(nand, 0);
-	return 0;
-}
-
-#endif
-
 #ifdef CONFIG_PCI
 struct pci_controller hose;
 
 int board_early_init_f (void)
 {
-	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
 
 	immap->im_clkrst.car_sccr |= M826X_SCCR_PCI_MODE_EN;
 	return 0;
@@ -1226,3 +950,8 @@ void pci_init_board(void)
 	pci_mpc8250_init(&hose);
 }
 #endif
+
+int board_eth_init(bd_t *bis)
+{
+	return pci_eth_init(bis);
+}
diff --git a/board/freescale/common/cds_eeprom.c b/board/tqc/tqm8272/tqm8272.h
index 5034e0ca2..6d558ec59 100644
--- a/board/freescale/common/cds_eeprom.c
+++ b/board/tqc/tqm8272/tqm8272.h
@@ -1,5 +1,6 @@
 /*
- * Copyright 2004 Freescale Semiconductor.
+ * (C) Copyright 2008
+ * Heiko Schocher, DENX Software Engineering, hs@denx.de.
  *
  * See file CREDITS for list of people who contributed to this
  * project.
@@ -20,41 +21,33 @@
  * MA 02111-1307 USA
  */
 
-
-#include <common.h>
-#include <i2c.h>
-
-#include "eeprom.h"
-
-
-typedef struct {
-	char idee_pcbid[4];		/* "CCID" for CDC v1.X */
-	u8 idee_major;
-	u8 idee_minor;
-	char idee_serial[10];
-	char idee_errata[2];
-	char idee_date[8];		/* yyyymmdd */
-	/* The rest of the EEPROM space is reserved */
-} id_eeprom_t;
-
-
-unsigned int
-get_cpu_board_revision(void)
-{
-	uint major = 0;
-	uint minor = 0;
-
-	id_eeprom_t id_eeprom;
-
-	i2c_read(CFG_I2C_EEPROM_ADDR, 0, 2,
-		 (uchar *) &id_eeprom, sizeof(id_eeprom));
-
-	major = id_eeprom.idee_major;
-	minor = id_eeprom.idee_minor;
-
-	if (major == 0xff && minor == 0xff) {
-		major = minor = 0;
-	}
-
-	return MPC85XX_CPU_BOARD_REV(major,minor);
-}
+#ifndef	_TQM8272_HEADER_H
+#define	_TQM8272_HEADER_H
+
+#define _NOT_USED_	0xFFFFFFFF
+
+typedef struct{
+	int	Bus;
+	int	flash;
+	int	flash_nr;
+	int	ram;
+	int	ram_cs;
+	int	nand;
+	int	nand_cs;
+	int	eeprom;
+	int	can;
+	unsigned long	cpunr;
+	unsigned long	option;
+	int	SecEng;
+	int	cpucl;
+	int	cpmcl;
+	int	buscl;
+	int	busclk_real_ok;
+	int	busclk_real;
+	unsigned char	OK;
+	unsigned char  ethaddr[20];
+} HWIB_INFO;
+
+static HWIB_INFO	hwinf = {0, 0, 1, 0, 1, 0, 0, 0, 0, 8272, 0 ,0,
+			 0, 0, 0, 0, 0, 0};
+#endif
diff --git a/board/tqc/tqm834x/pci.c b/board/tqc/tqm834x/pci.c
index e3d0309d9..0eedf4ae4 100644
--- a/board/tqc/tqm834x/pci.c
+++ b/board/tqc/tqm834x/pci.c
@@ -29,8 +29,8 @@
 #ifdef CONFIG_PCI
 
 /* System RAM mapped to PCI space */
-#define CONFIG_PCI_SYS_MEM_BUS	CFG_SDRAM_BASE
-#define CONFIG_PCI_SYS_MEM_PHYS	CFG_SDRAM_BASE
+#define CONFIG_PCI_SYS_MEM_BUS	CONFIG_SYS_SDRAM_BASE
+#define CONFIG_PCI_SYS_MEM_PHYS	CONFIG_SYS_SDRAM_BASE
 #define CONFIG_PCI_SYS_MEM_SIZE	(1024 * 1024 * 1024)
 
 #ifndef CONFIG_PCI_PNP
@@ -78,7 +78,7 @@ pci_init_board(void)
 	u32 reg32;
 	struct	pci_controller * hose;
 
-	immr = (immap_t *)CFG_IMMR;
+	immr = (immap_t *)CONFIG_SYS_IMMR;
 	clk = (clk83xx_t *)&immr->clk;
 	pci_law = immr->sysconf.pcilaw;
 	pci_pot = immr->ios.pot;
@@ -128,10 +128,10 @@ pci_init_board(void)
 	/*
 	 * Configure PCI Local Access Windows
 	 */
-	pci_law[0].bar = CFG_PCI1_MEM_PHYS & LAWBAR_BAR;
+	pci_law[0].bar = CONFIG_SYS_PCI1_MEM_PHYS & LAWBAR_BAR;
 	pci_law[0].ar = LAWAR_EN | LAWAR_SIZE_512M;
 
-	pci_law[1].bar = CFG_PCI1_IO_PHYS & LAWBAR_BAR;
+	pci_law[1].bar = CONFIG_SYS_PCI1_IO_PHYS & LAWBAR_BAR;
 	pci_law[1].ar = LAWAR_EN | LAWAR_SIZE_16M;
 
 	/*
@@ -139,13 +139,13 @@ pci_init_board(void)
 	 */
 
 	/* PCI1 mem space */
-	pci_pot[0].potar = (CFG_PCI1_MEM_BASE >> 12) & POTAR_TA_MASK;
-	pci_pot[0].pobar = (CFG_PCI1_MEM_PHYS >> 12) & POBAR_BA_MASK;
+	pci_pot[0].potar = (CONFIG_SYS_PCI1_MEM_BASE >> 12) & POTAR_TA_MASK;
+	pci_pot[0].pobar = (CONFIG_SYS_PCI1_MEM_PHYS >> 12) & POBAR_BA_MASK;
 	pci_pot[0].pocmr = POCMR_EN | (POCMR_CM_512M & POCMR_CM_MASK);
 
 	/* PCI1 IO space */
-	pci_pot[1].potar = (CFG_PCI1_IO_BASE >> 12) & POTAR_TA_MASK;
-	pci_pot[1].pobar = (CFG_PCI1_IO_PHYS >> 12) & POBAR_BA_MASK;
+	pci_pot[1].potar = (CONFIG_SYS_PCI1_IO_BASE >> 12) & POTAR_TA_MASK;
+	pci_pot[1].pobar = (CONFIG_SYS_PCI1_IO_PHYS >> 12) & POBAR_BA_MASK;
 	pci_pot[1].pocmr = POCMR_EN | POCMR_IO | (POCMR_CM_16M & POCMR_CM_MASK);
 
 	/*
@@ -164,16 +164,16 @@ pci_init_board(void)
 
 	/* PCI memory space */
 	pci_set_region(hose->regions + 0,
-		       CFG_PCI1_MEM_BASE,
-		       CFG_PCI1_MEM_PHYS,
-		       CFG_PCI1_MEM_SIZE,
+		       CONFIG_SYS_PCI1_MEM_BASE,
+		       CONFIG_SYS_PCI1_MEM_PHYS,
+		       CONFIG_SYS_PCI1_MEM_SIZE,
 		       PCI_REGION_MEM);
 
 	/* PCI IO space */
 	pci_set_region(hose->regions + 1,
-		       CFG_PCI1_IO_BASE,
-		       CFG_PCI1_IO_PHYS,
-		       CFG_PCI1_IO_SIZE,
+		       CONFIG_SYS_PCI1_IO_BASE,
+		       CONFIG_SYS_PCI1_IO_PHYS,
+		       CONFIG_SYS_PCI1_IO_SIZE,
 		       PCI_REGION_IO);
 
 	/* System memory space */
@@ -186,8 +186,8 @@ pci_init_board(void)
 	hose->region_count = 3;
 
 	pci_setup_indirect(hose,
-			   (CFG_IMMR+0x8300),
-			   (CFG_IMMR+0x8304));
+			   (CONFIG_SYS_IMMR+0x8300),
+			   (CONFIG_SYS_IMMR+0x8304));
 
 	pci_register_hose(hose);
 
diff --git a/board/tqc/tqm834x/tqm834x.c b/board/tqc/tqm834x/tqm834x.c
index 278780dde..106cac244 100644
--- a/board/tqc/tqm834x/tqm834x.c
+++ b/board/tqc/tqm834x/tqm834x.c
@@ -67,7 +67,7 @@ static void set_cs_config(short cs, long config);
 static void set_ddr_config(void);
 
 /* Local variable */
-static volatile immap_t *im = (immap_t *)CFG_IMMR;
+static volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
 
 /**************************************************************************
  * Board initialzation after relocation to RAM. Used to detect the number
@@ -92,13 +92,13 @@ phys_size_t initdram (int board_type)
 	int cs;
 
 	/* during size detection, set up the max DDRLAW size */
-	im->sysconf.ddrlaw[0].bar = CFG_DDR_BASE;
+	im->sysconf.ddrlaw[0].bar = CONFIG_SYS_DDR_BASE;
 	im->sysconf.ddrlaw[0].ar = (LAWAR_EN | LAWAR_SIZE_2G);
 
 	/* set CS bounds to maximum size */
 	for(cs = 0; cs < 4; ++cs) {
 		set_cs_bounds(cs,
-			CFG_DDR_BASE + (cs * DDR_MAX_SIZE_PER_CS),
+			CONFIG_SYS_DDR_BASE + (cs * DDR_MAX_SIZE_PER_CS),
 			DDR_MAX_SIZE_PER_CS);
 
 		set_cs_config(cs, INITIAL_CS_CONFIG);
@@ -122,7 +122,7 @@ phys_size_t initdram (int board_type)
 		debug("\nDetecting Bank%d\n", cs);
 
 		bank_size = get_ddr_bank_size(cs,
-			(volatile long*)(CFG_DDR_BASE + size));
+			(volatile long*)(CONFIG_SYS_DDR_BASE + size));
 		size += bank_size;
 
 		debug("DDR Bank%d size: %d MiB\n\n", cs, bank_size >> 20);
@@ -145,7 +145,7 @@ int checkboard (void)
 	volatile immap_t * immr;
 	u32 w, f;
 
-	immr = (immap_t *)CFG_IMMR;
+	immr = (immap_t *)CONFIG_SYS_IMMR;
 	if (!(immr->reset.rcwh & HRCWH_PCI_HOST)) {
 		printf("PCI:   NOT in host mode..?!\n");
 		return 0;
@@ -193,9 +193,9 @@ static int detect_num_flash_banks(void)
 	tqm834x_num_flash_banks = 2;	/* assume two banks */
 
 	/* Get bank 1 and 2 information */
-	bank1_size = flash_get_size(CFG_FLASH_BASE, 0);
+	bank1_size = flash_get_size(CONFIG_SYS_FLASH_BASE, 0);
 	debug("Bank1 size: %lu\n", bank1_size);
-	bank2_size = flash_get_size(CFG_FLASH_BASE + bank1_size, 1);
+	bank2_size = flash_get_size(CONFIG_SYS_FLASH_BASE + bank1_size, 1);
 	debug("Bank2 size: %lu\n", bank2_size);
 	total_size = bank1_size + bank2_size;
 
@@ -203,8 +203,8 @@ static int detect_num_flash_banks(void)
 		/* Seems like we've got bank 2, but maybe it's mirrored 1 */
 
 		/* Set the base addresses */
-		bank1_base = (FPWV *) (CFG_FLASH_BASE);
-		bank2_base = (FPWV *) (CFG_FLASH_BASE + bank1_size);
+		bank1_base = (FPWV *) (CONFIG_SYS_FLASH_BASE);
+		bank2_base = (FPWV *) (CONFIG_SYS_FLASH_BASE + bank1_size);
 
 		/* Put bank 2 into CFI command mode and read */
 		bank2_base[0x55] = 0x00980098;
@@ -253,9 +253,9 @@ static int detect_num_flash_banks(void)
 	debug("Number of flash banks detected: %d\n", tqm834x_num_flash_banks);
 
 	/* set OR0 and BR0 */
-	im->lbus.bank[0].or = CFG_OR_TIMING_FLASH |
+	im->lbus.bank[0].or = CONFIG_SYS_OR_TIMING_FLASH |
 		(-(total_size) & OR_GPCM_AM);
-	im->lbus.bank[0].br = (CFG_FLASH_BASE & BR_BA) |
+	im->lbus.bank[0].br = (CONFIG_SYS_FLASH_BASE & BR_BA) |
 		(BR_MS_GPCM | BR_PS_32 | BR_V);
 
 	return (0);
diff --git a/board/tqc/tqm85xx/law.c b/board/tqc/tqm85xx/law.c
index de3ea00e3..fc92cd8b3 100644
--- a/board/tqc/tqm85xx/law.c
+++ b/board/tqc/tqm85xx/law.c
@@ -66,20 +66,20 @@
 #endif
 
 struct law_entry law_table[] = {
-	SET_LAW(CFG_DDR_SDRAM_BASE, LAW_SIZE_512M, LAW_TRGT_IF_DDR),
-	SET_LAW(CFG_PCI1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI),
-	SET_LAW(CFG_LBC_FLASH_BASE, LAW_3_SIZE, LAW_TRGT_IF_LBC),
-	SET_LAW(CFG_PCI1_IO_PHYS, LAW_SIZE_16M, LAW_TRGT_IF_PCI),
+	SET_LAW(CONFIG_SYS_DDR_SDRAM_BASE, LAW_SIZE_512M, LAW_TRGT_IF_DDR),
+	SET_LAW(CONFIG_SYS_PCI1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI),
+	SET_LAW(CONFIG_SYS_LBC_FLASH_BASE, LAW_3_SIZE, LAW_TRGT_IF_LBC),
+	SET_LAW(CONFIG_SYS_PCI1_IO_PHYS, LAW_SIZE_16M, LAW_TRGT_IF_PCI),
 #ifdef CONFIG_PCIE1
-	SET_LAW(CFG_PCIE1_MEM_BASE, LAW_5_SIZE, LAW_TRGT_IF_PCIE_1),
+	SET_LAW(CONFIG_SYS_PCIE1_MEM_BASE, LAW_5_SIZE, LAW_TRGT_IF_PCIE_1),
 #else /* !CONFIG_PCIE1 */
-	SET_LAW(CFG_RIO_MEM_BASE, LAW_5_SIZE, LAW_TRGT_IF_RIO),
+	SET_LAW(CONFIG_SYS_RIO_MEM_BASE, LAW_5_SIZE, LAW_TRGT_IF_RIO),
 #endif /* CONFIG_PCIE1 */
 #if defined(CONFIG_CAN_DRIVER) || defined(CONFIG_NAND)
-	SET_LAW(CFG_CAN_BASE, LAW_SIZE_16M, LAW_TRGT_IF_LBC),
+	SET_LAW(CONFIG_SYS_CAN_BASE, LAW_SIZE_16M, LAW_TRGT_IF_LBC),
 #endif /* CONFIG_CAN_DRIVER || CONFIG_NAND */
 #ifdef CONFIG_PCIE1
-	SET_LAW(CFG_PCIE1_IO_BASE, LAW_SIZE_16M, LAW_TRGT_IF_PCIE_1),
+	SET_LAW(CONFIG_SYS_PCIE1_IO_BASE, LAW_SIZE_16M, LAW_TRGT_IF_PCIE_1),
 #endif /* CONFIG_PCIE */
 };
 
diff --git a/board/tqc/tqm85xx/nand.c b/board/tqc/tqm85xx/nand.c
index 9c5c12c84..dea652dfd 100644
--- a/board/tqc/tqm85xx/nand.c
+++ b/board/tqc/tqm85xx/nand.c
@@ -41,10 +41,10 @@ DECLARE_GLOBAL_DATA_PTR;
 extern uint get_lbc_clock (void);
 
 /* index of UPM RAM array run pattern for NAND command cycle */
-#define	CFG_NAN_UPM_WRITE_CMD_OFS	0x08
+#define	CONFIG_SYS_NAN_UPM_WRITE_CMD_OFS	0x08
 
 /* index of UPM RAM array run pattern for NAND address cycle */
-#define	CFG_NAND_UPM_WRITE_ADDR_OFS	0x10
+#define	CONFIG_SYS_NAND_UPM_WRITE_ADDR_OFS	0x10
 
 /* Structure for table with supported UPM timings */
 struct upm_freq {
@@ -377,7 +377,7 @@ volatile const u32 *nand_upm_patt;
  */
 static void upmb_write (u_char addr, ulong val)
 {
-	volatile ccsr_lbc_t *lbc = (void *)(CFG_MPC85xx_LBC_ADDR);
+	volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR);
 
 	out_be32 (&lbc->mdr, val);
 
@@ -385,7 +385,7 @@ static void upmb_write (u_char addr, ulong val)
 			MxMR_OP_WARR | (addr & MxMR_MAD_MSK));
 
 	/* dummy access to perform write */
-	out_8 ((void __iomem *)CFG_NAND0_BASE, 0);
+	out_8 ((void __iomem *)CONFIG_SYS_NAND0_BASE, 0);
 
 	clrbits_be32(&lbc->mbmr, MxMR_OP_WARR);
 }
@@ -396,11 +396,11 @@ static void upmb_write (u_char addr, ulong val)
 static void nand_upm_setup (volatile ccsr_lbc_t *lbc)
 {
 	uint i;
-	uint or3 = CFG_OR3_PRELIM;
+	uint or3 = CONFIG_SYS_OR3_PRELIM;
 	uint clock = get_lbc_clock ();
 
 	out_be32 (&lbc->br3, 0);	/* disable bank and reset all bits */
-	out_be32 (&lbc->br3, CFG_BR3_PRELIM);
+	out_be32 (&lbc->br3, CONFIG_SYS_BR3_PRELIM);
 
 	/*
 	 * Search appropriate UPM table for bus clock.
@@ -455,7 +455,7 @@ void board_nand_select_device (struct nand_chip *nand, int chip)
 
 int board_nand_init (struct nand_chip *nand)
 {
-	volatile ccsr_lbc_t *lbc = (void *)(CFG_MPC85xx_LBC_ADDR);
+	volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR);
 
 	if (!nand_upm_patt)
 		nand_upm_setup (lbc);
diff --git a/board/tqc/tqm85xx/sdram.c b/board/tqc/tqm85xx/sdram.c
index 33bc4077e..783b2809e 100644
--- a/board/tqc/tqm85xx/sdram.c
+++ b/board/tqc/tqm85xx/sdram.c
@@ -66,9 +66,9 @@ int cas_latency (void);
 long int sdram_setup (int casl)
 {
 	int i;
-	volatile ccsr_ddr_t *ddr = (void *)(CFG_MPC85xx_DDR_ADDR);
+	volatile ccsr_ddr_t *ddr = (void *)(CONFIG_SYS_MPC85xx_DDR_ADDR);
 #ifdef CONFIG_TQM8548
-	volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR);
+	volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
 #else /* !CONFIG_TQM8548 */
 	unsigned long cfg_ddr_timing1;
 	unsigned long cfg_ddr_mode;
@@ -296,7 +296,7 @@ phys_size_t initdram (int board_type)
 	 * This DLL-Override only used on TQM8540 and TQM8560
 	 */
 	{
-		volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR);
+		volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
 		int i, x;
 
 		x = 10;
@@ -336,11 +336,11 @@ phys_size_t initdram (int board_type)
 	return dram_size;
 }
 
-#if defined(CFG_DRAM_TEST)
+#if defined(CONFIG_SYS_DRAM_TEST)
 int testdram (void)
 {
-	uint *pstart = (uint *) CFG_MEMTEST_START;
-	uint *pend = (uint *) CFG_MEMTEST_END;
+	uint *pstart = (uint *) CONFIG_SYS_MEMTEST_START;
+	uint *pend = (uint *) CONFIG_SYS_MEMTEST_END;
 	uint *p;
 
 	printf ("SDRAM test phase 1:\n");
diff --git a/board/tqc/tqm85xx/tlb.c b/board/tqc/tqm85xx/tlb.c
index 380448a4f..16b102d1e 100644
--- a/board/tqc/tqm85xx/tlb.c
+++ b/board/tqc/tqm85xx/tlb.c
@@ -28,19 +28,19 @@
 
 struct fsl_e_tlb_entry tlb_table[] = {
 	/* TLB 0 - for temp stack in cache */
-	SET_TLB_ENTRY (0, CFG_INIT_RAM_ADDR, CFG_INIT_RAM_ADDR,
+	SET_TLB_ENTRY (0, CONFIG_SYS_INIT_RAM_ADDR, CONFIG_SYS_INIT_RAM_ADDR,
 		       MAS3_SX | MAS3_SW | MAS3_SR, 0,
 		       0, 0, BOOKE_PAGESZ_4K, 0),
-	SET_TLB_ENTRY (0, CFG_INIT_RAM_ADDR + 4 * 1024,
-		       CFG_INIT_RAM_ADDR + 4 * 1024,
+	SET_TLB_ENTRY (0, CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024,
+		       CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024,
 		       MAS3_SX | MAS3_SW | MAS3_SR, 0,
 		       0, 0, BOOKE_PAGESZ_4K, 0),
-	SET_TLB_ENTRY (0, CFG_INIT_RAM_ADDR + 8 * 1024,
-		       CFG_INIT_RAM_ADDR + 8 * 1024,
+	SET_TLB_ENTRY (0, CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024,
+		       CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024,
 		       MAS3_SX | MAS3_SW | MAS3_SR, 0,
 		       0, 0, BOOKE_PAGESZ_4K, 0),
-	SET_TLB_ENTRY (0, CFG_INIT_RAM_ADDR + 12 * 1024,
-		       CFG_INIT_RAM_ADDR + 12 * 1024,
+	SET_TLB_ENTRY (0, CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024,
+		       CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024,
 		       MAS3_SX | MAS3_SW | MAS3_SR, 0,
 		       0, 0, BOOKE_PAGESZ_4K, 0),
 
@@ -50,11 +50,11 @@ struct fsl_e_tlb_entry tlb_table[] = {
 	 * 0xf8000000	128M	FLASH
 	 * Out of reset this entry is only 4K.
 	 */
-	SET_TLB_ENTRY (1, CFG_FLASH_BASE, CFG_FLASH_BASE,
+	SET_TLB_ENTRY (1, CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE,
 		       MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G,
 		       0, 1, BOOKE_PAGESZ_64M, 1),
-	SET_TLB_ENTRY (1, CFG_FLASH_BASE + 0x4000000,
-		       CFG_FLASH_BASE + 0x4000000,
+	SET_TLB_ENTRY (1, CONFIG_SYS_FLASH_BASE + 0x4000000,
+		       CONFIG_SYS_FLASH_BASE + 0x4000000,
 		       MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G,
 		       0, 0, BOOKE_PAGESZ_64M, 1),
 
@@ -62,7 +62,7 @@ struct fsl_e_tlb_entry tlb_table[] = {
 	 * TLB 2:	256M	Non-cacheable, guarded
 	 * 0x80000000	256M	PCI1 MEM First half
 	 */
-	SET_TLB_ENTRY (1, CFG_PCI1_MEM_PHYS, CFG_PCI1_MEM_PHYS,
+	SET_TLB_ENTRY (1, CONFIG_SYS_PCI1_MEM_PHYS, CONFIG_SYS_PCI1_MEM_PHYS,
 		       MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G,
 		       0, 2, BOOKE_PAGESZ_256M, 1),
 
@@ -70,8 +70,8 @@ struct fsl_e_tlb_entry tlb_table[] = {
 	 * TLB 3:	256M	Non-cacheable, guarded
 	 * 0x90000000	256M	PCI1 MEM Second half
 	 */
-	SET_TLB_ENTRY (1, CFG_PCI1_MEM_PHYS + 0x10000000,
-		       CFG_PCI1_MEM_PHYS + 0x10000000,
+	SET_TLB_ENTRY (1, CONFIG_SYS_PCI1_MEM_PHYS + 0x10000000,
+		       CONFIG_SYS_PCI1_MEM_PHYS + 0x10000000,
 		       MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G,
 		       0, 3, BOOKE_PAGESZ_256M, 1),
 
@@ -80,7 +80,7 @@ struct fsl_e_tlb_entry tlb_table[] = {
 	 * TLB 4:	256M	Non-cacheable, guarded
 	 * 0xc0000000	256M	PCI express MEM First half
 	 */
-	SET_TLB_ENTRY (1, CFG_PCIE1_MEM_BASE, CFG_PCIE1_MEM_BASE,
+	SET_TLB_ENTRY (1, CONFIG_SYS_PCIE1_MEM_BASE, CONFIG_SYS_PCIE1_MEM_BASE,
 		       MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G,
 		       0, 4, BOOKE_PAGESZ_256M, 1),
 
@@ -88,8 +88,8 @@ struct fsl_e_tlb_entry tlb_table[] = {
 	 * TLB 5:	256M	Non-cacheable, guarded
 	 * 0xd0000000	256M	PCI express MEM Second half
 	 */
-	SET_TLB_ENTRY (1, CFG_PCIE1_MEM_BASE + 0x10000000,
-		       CFG_PCIE1_MEM_BASE + 0x10000000,
+	SET_TLB_ENTRY (1, CONFIG_SYS_PCIE1_MEM_BASE + 0x10000000,
+		       CONFIG_SYS_PCIE1_MEM_BASE + 0x10000000,
 		       MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G,
 		       0, 5, BOOKE_PAGESZ_256M, 1),
 #else /* !CONFIG_PCIE */
@@ -97,7 +97,7 @@ struct fsl_e_tlb_entry tlb_table[] = {
 	 * TLB 4:	256M	Non-cacheable, guarded
 	 * 0xc0000000	256M	Rapid IO MEM First half
 	 */
-	SET_TLB_ENTRY (1, CFG_RIO_MEM_BASE, CFG_RIO_MEM_BASE,
+	SET_TLB_ENTRY (1, CONFIG_SYS_RIO_MEM_BASE, CONFIG_SYS_RIO_MEM_BASE,
 		       MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G,
 		       0, 4, BOOKE_PAGESZ_256M, 1),
 
@@ -105,8 +105,8 @@ struct fsl_e_tlb_entry tlb_table[] = {
 	 * TLB 5:	256M	Non-cacheable, guarded
 	 * 0xd0000000	256M	Rapid IO MEM Second half
 	 */
-	SET_TLB_ENTRY (1, CFG_RIO_MEM_BASE + 0x10000000,
-		       CFG_RIO_MEM_BASE + 0x10000000,
+	SET_TLB_ENTRY (1, CONFIG_SYS_RIO_MEM_BASE + 0x10000000,
+		       CONFIG_SYS_RIO_MEM_BASE + 0x10000000,
 		       MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G,
 		       0, 5, BOOKE_PAGESZ_256M, 1),
 #endif /* CONFIG_PCIE */
@@ -117,7 +117,7 @@ struct fsl_e_tlb_entry tlb_table[] = {
 	 * 0xe2000000	 16M	PCI1 IO
 	 * 0xe3000000	 16M	CAN and NAND Flash
 	 */
-	SET_TLB_ENTRY (1, CFG_CCSRBAR, CFG_CCSRBAR_PHYS,
+	SET_TLB_ENTRY (1, CONFIG_SYS_CCSRBAR, CONFIG_SYS_CCSRBAR_PHYS,
 		       MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G,
 		       0, 6, BOOKE_PAGESZ_64M, 1),
 
@@ -128,12 +128,12 @@ struct fsl_e_tlb_entry tlb_table[] = {
 	 * Make sure the TLB count at the top of this table is correct.
 	 * Likely it needs to be increased by two for these entries.
 	 */
-	SET_TLB_ENTRY (1, CFG_DDR_SDRAM_BASE, CFG_DDR_SDRAM_BASE,
+	SET_TLB_ENTRY (1, CONFIG_SYS_DDR_SDRAM_BASE, CONFIG_SYS_DDR_SDRAM_BASE,
 		       MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G,
 		       0, 7, BOOKE_PAGESZ_256M, 1),
 
-	SET_TLB_ENTRY (1, CFG_DDR_SDRAM_BASE + 0x10000000,
-		       CFG_DDR_SDRAM_BASE + 0x10000000,
+	SET_TLB_ENTRY (1, CONFIG_SYS_DDR_SDRAM_BASE + 0x10000000,
+		       CONFIG_SYS_DDR_SDRAM_BASE + 0x10000000,
 		       MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G,
 		       0, 8, BOOKE_PAGESZ_256M, 1),
 
@@ -142,7 +142,7 @@ struct fsl_e_tlb_entry tlb_table[] = {
 	 * TLB 9:	 16M	Non-cacheable, guarded
 	 * 0xef000000	 16M	PCI express IO
 	 */
-	SET_TLB_ENTRY (1, CFG_PCIE1_IO_BASE, CFG_PCIE1_IO_BASE,
+	SET_TLB_ENTRY (1, CONFIG_SYS_PCIE1_IO_BASE, CONFIG_SYS_PCIE1_IO_BASE,
 		       MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G,
 		       0, 9, BOOKE_PAGESZ_16M, 1),
 #endif /* CONFIG_PCIE */
@@ -154,19 +154,19 @@ struct fsl_e_tlb_entry tlb_table[] = {
 	 * 0xc0000000	  1G	FLASH
 	 * Out of reset this entry is only 4K.
 	 */
-	SET_TLB_ENTRY (1, CFG_FLASH_BASE, CFG_FLASH_BASE,
+	SET_TLB_ENTRY (1, CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE,
 		       MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G,
 		       0, 3, BOOKE_PAGESZ_256M, 1),
-	SET_TLB_ENTRY (1, CFG_FLASH_BASE + 0x10000000,
-		       CFG_FLASH_BASE + 0x10000000,
+	SET_TLB_ENTRY (1, CONFIG_SYS_FLASH_BASE + 0x10000000,
+		       CONFIG_SYS_FLASH_BASE + 0x10000000,
 		       MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G,
 		       0, 2, BOOKE_PAGESZ_256M, 1),
-	SET_TLB_ENTRY (1, CFG_FLASH_BASE + 0x20000000,
-		       CFG_FLASH_BASE + 0x20000000,
+	SET_TLB_ENTRY (1, CONFIG_SYS_FLASH_BASE + 0x20000000,
+		       CONFIG_SYS_FLASH_BASE + 0x20000000,
 		       MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G,
 		       0, 1, BOOKE_PAGESZ_256M, 1),
-	SET_TLB_ENTRY (1, CFG_FLASH_BASE + 0x30000000,
-		       CFG_FLASH_BASE + 0x30000000,
+	SET_TLB_ENTRY (1, CONFIG_SYS_FLASH_BASE + 0x30000000,
+		       CONFIG_SYS_FLASH_BASE + 0x30000000,
 		       MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G,
 		       0, 0, BOOKE_PAGESZ_256M, 1),
 
@@ -174,7 +174,7 @@ struct fsl_e_tlb_entry tlb_table[] = {
 	 * TLB 4:	256M	Non-cacheable, guarded
 	 * 0x80000000	256M	PCI1 MEM First half
 	 */
-	SET_TLB_ENTRY (1, CFG_PCI1_MEM_PHYS, CFG_PCI1_MEM_PHYS,
+	SET_TLB_ENTRY (1, CONFIG_SYS_PCI1_MEM_PHYS, CONFIG_SYS_PCI1_MEM_PHYS,
 		       MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G,
 		       0, 4, BOOKE_PAGESZ_256M, 1),
 
@@ -182,8 +182,8 @@ struct fsl_e_tlb_entry tlb_table[] = {
 	 * TLB 5:	256M	Non-cacheable, guarded
 	 * 0x90000000	256M	PCI1 MEM Second half
 	 */
-	SET_TLB_ENTRY (1, CFG_PCI1_MEM_PHYS + 0x10000000,
-		       CFG_PCI1_MEM_PHYS + 0x10000000,
+	SET_TLB_ENTRY (1, CONFIG_SYS_PCI1_MEM_PHYS + 0x10000000,
+		       CONFIG_SYS_PCI1_MEM_PHYS + 0x10000000,
 		       MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G,
 		       0, 5, BOOKE_PAGESZ_256M, 1),
 
@@ -192,7 +192,7 @@ struct fsl_e_tlb_entry tlb_table[] = {
 	 * TLB 6:	256M	Non-cacheable, guarded
 	 * 0xc0000000	256M	PCI express MEM First half
 	 */
-	SET_TLB_ENTRY (1, CFG_PCIE1_MEM_BASE, CFG_PCIE1_MEM_BASE,
+	SET_TLB_ENTRY (1, CONFIG_SYS_PCIE1_MEM_BASE, CONFIG_SYS_PCIE1_MEM_BASE,
 		       MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G,
 		       0, 6, BOOKE_PAGESZ_256M, 1),
 #else /* !CONFIG_PCIE */
@@ -200,7 +200,7 @@ struct fsl_e_tlb_entry tlb_table[] = {
 	 * TLB 6:	256M	Non-cacheable, guarded
 	 * 0xb0000000	256M	Rapid IO MEM First half
 	 */
-	SET_TLB_ENTRY (1, CFG_RIO_MEM_BASE, CFG_RIO_MEM_BASE,
+	SET_TLB_ENTRY (1, CONFIG_SYS_RIO_MEM_BASE, CONFIG_SYS_RIO_MEM_BASE,
 		       MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G,
 		       0, 6, BOOKE_PAGESZ_256M, 1),
 
@@ -212,7 +212,7 @@ struct fsl_e_tlb_entry tlb_table[] = {
 	 * 0xa2000000	 16M	PCI1 IO
 	 * 0xa3000000	 16M	CAN and NAND Flash
 	 */
-	SET_TLB_ENTRY (1, CFG_CCSRBAR, CFG_CCSRBAR_PHYS,
+	SET_TLB_ENTRY (1, CONFIG_SYS_CCSRBAR, CONFIG_SYS_CCSRBAR_PHYS,
 		       MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G,
 		       0, 7, BOOKE_PAGESZ_64M, 1),
 
@@ -223,12 +223,12 @@ struct fsl_e_tlb_entry tlb_table[] = {
 	 * Make sure the TLB count at the top of this table is correct.
 	 * Likely it needs to be increased by two for these entries.
 	 */
-	SET_TLB_ENTRY (1, CFG_DDR_SDRAM_BASE, CFG_DDR_SDRAM_BASE,
+	SET_TLB_ENTRY (1, CONFIG_SYS_DDR_SDRAM_BASE, CONFIG_SYS_DDR_SDRAM_BASE,
 		       MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G,
 		       0, 8, BOOKE_PAGESZ_256M, 1),
 
-	SET_TLB_ENTRY (1, CFG_DDR_SDRAM_BASE + 0x10000000,
-		       CFG_DDR_SDRAM_BASE + 0x10000000,
+	SET_TLB_ENTRY (1, CONFIG_SYS_DDR_SDRAM_BASE + 0x10000000,
+		       CONFIG_SYS_DDR_SDRAM_BASE + 0x10000000,
 		       MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G,
 		       0, 9, BOOKE_PAGESZ_256M, 1),
 
@@ -237,7 +237,7 @@ struct fsl_e_tlb_entry tlb_table[] = {
 	 * TLB 10:	 16M	Non-cacheable, guarded
 	 * 0xaf000000	 16M	PCI express IO
 	 */
-	SET_TLB_ENTRY (1, CFG_PCIE1_IO_BASE, CFG_PCIE1_IO_BASE,
+	SET_TLB_ENTRY (1, CONFIG_SYS_PCIE1_IO_BASE, CONFIG_SYS_PCIE1_IO_BASE,
 		       MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G,
 		       0, 10, BOOKE_PAGESZ_16M, 1),
 #endif /* CONFIG_PCIE */
diff --git a/board/tqc/tqm85xx/tqm85xx.c b/board/tqc/tqm85xx/tqm85xx.c
index ae3c2456f..73f1d01bd 100644
--- a/board/tqc/tqm85xx/tqm85xx.c
+++ b/board/tqc/tqm85xx/tqm85xx.c
@@ -23,7 +23,7 @@
  *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.         See the
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
@@ -42,6 +42,7 @@
 #include <flash.h>
 #include <libfdt.h>
 #include <fdt_support.h>
+#include <netdev.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -268,7 +269,7 @@ int checkboard (void)
 
 int misc_init_r (void)
 {
-	volatile ccsr_lbc_t *memctl = (void *)(CFG_MPC85xx_LBC_ADDR);
+	volatile ccsr_lbc_t *memctl = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR);
 
 	/*
 	 * Adjust flash start and offset to detected values
@@ -281,9 +282,9 @@ int misc_init_r (void)
 	 */
 	if (flash_info[0].size > 0) {
 		memctl->or1 = ((-flash_info[0].size) & 0xffff8000) |
-			(CFG_OR1_PRELIM & 0x00007fff);
+			(CONFIG_SYS_OR1_PRELIM & 0x00007fff);
 		memctl->br1 = gd->bd->bi_flashstart |
-			(CFG_BR1_PRELIM & 0x00007fff);
+			(CONFIG_SYS_BR1_PRELIM & 0x00007fff);
 		/*
 		 * Re-check to get correct base address for bank 1
 		 */
@@ -297,9 +298,9 @@ int misc_init_r (void)
 	 *  If bank 1 is equipped, bank 0 is mapped after bank 1
 	 */
 	memctl->or0 = ((-flash_info[1].size) & 0xffff8000) |
-		(CFG_OR0_PRELIM & 0x00007fff);
+		(CONFIG_SYS_OR0_PRELIM & 0x00007fff);
 	memctl->br0 = (gd->bd->bi_flashstart + flash_info[0].size) |
-		(CFG_BR0_PRELIM & 0x00007fff);
+		(CONFIG_SYS_BR0_PRELIM & 0x00007fff);
 	/*
 	 * Re-check to get correct base address for bank 0
 	 */
@@ -310,26 +311,26 @@ int misc_init_r (void)
 	 */
 	flash_protect (FLAG_PROTECT_CLEAR,
 		       gd->bd->bi_flashstart, 0xffffffff,
-		       &flash_info[CFG_MAX_FLASH_BANKS - 1]);
+		       &flash_info[CONFIG_SYS_MAX_FLASH_BANKS - 1]);
 
 	/* Monitor protection ON by default */
 	flash_protect (FLAG_PROTECT_SET,
-		       CFG_MONITOR_BASE,
-		       CFG_MONITOR_BASE + monitor_flash_len - 1,
-		       &flash_info[CFG_MAX_FLASH_BANKS - 1]);
+		       CONFIG_SYS_MONITOR_BASE,
+		       CONFIG_SYS_MONITOR_BASE + monitor_flash_len - 1,
+		       &flash_info[CONFIG_SYS_MAX_FLASH_BANKS - 1]);
 
 	/* Environment protection ON by default */
 	flash_protect (FLAG_PROTECT_SET,
-		       CFG_ENV_ADDR,
-		       CFG_ENV_ADDR + CFG_ENV_SECT_SIZE - 1,
-		       &flash_info[CFG_MAX_FLASH_BANKS - 1]);
+		       CONFIG_ENV_ADDR,
+		       CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE - 1,
+		       &flash_info[CONFIG_SYS_MAX_FLASH_BANKS - 1]);
 
-#ifdef CFG_ENV_ADDR_REDUND
+#ifdef CONFIG_ENV_ADDR_REDUND
 	/* Redundant environment protection ON by default */
 	flash_protect (FLAG_PROTECT_SET,
-		       CFG_ENV_ADDR_REDUND,
-		       CFG_ENV_ADDR_REDUND + CFG_ENV_SIZE_REDUND - 1,
-		       &flash_info[CFG_MAX_FLASH_BANKS - 1]);
+		       CONFIG_ENV_ADDR_REDUND,
+		       CONFIG_ENV_ADDR_REDUND + CONFIG_ENV_SIZE_REDUND - 1,
+		       &flash_info[CONFIG_SYS_MAX_FLASH_BANKS - 1]);
 #endif
 
 	return 0;
@@ -341,7 +342,7 @@ int misc_init_r (void)
  */
 static void upmc_write (u_char addr, uint val)
 {
-	volatile ccsr_lbc_t *lbc = (void *)(CFG_MPC85xx_LBC_ADDR);
+	volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR);
 
 	out_be32 (&lbc->mdr, val);
 
@@ -349,7 +350,7 @@ static void upmc_write (u_char addr, uint val)
 			MxMR_OP_WARR | (addr & MxMR_MAD_MSK));
 
 	/* dummy access to perform write */
-	out_8 ((void __iomem *)CFG_CAN_BASE, 0);
+	out_8 ((void __iomem *)CONFIG_SYS_CAN_BASE, 0);
 
 	/* normal operation */
 	clrbits_be32(&lbc->mcmr, MxMR_OP_WARR);
@@ -358,7 +359,7 @@ static void upmc_write (u_char addr, uint val)
 
 uint get_lbc_clock (void)
 {
-	volatile ccsr_lbc_t *lbc = (void *)(CFG_MPC85xx_LBC_ADDR);
+	volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR);
 	sys_info_t sys_info;
 	ulong clkdiv = lbc->lcrr & 0x0f;
 
@@ -375,7 +376,7 @@ uint get_lbc_clock (void)
 		return sys_info.freqSystemBus / clkdiv;
 	}
 
-	puts("Invalid clock divider value in CFG_LBC_LCRR\n");
+	puts("Invalid clock divider value in CONFIG_SYS_LBC_LCRR\n");
 
 	return 0;
 }
@@ -385,8 +386,8 @@ uint get_lbc_clock (void)
  */
 void local_bus_init (void)
 {
-	volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR);
-	volatile ccsr_lbc_t *lbc = (void *)(CFG_MPC85xx_LBC_ADDR);
+	volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+	volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR);
 	uint lbc_mhz = get_lbc_clock ()  / 1000000;
 
 #ifdef CONFIG_MPC8548
@@ -417,7 +418,7 @@ void local_bus_init (void)
 		gur->lbiuiplldcr1 = dummy;
 	}
 
-	lcrr = CFG_LBC_LCRR;
+	lcrr = CONFIG_SYS_LBC_LCRR;
 
 	/*
 	 * Local Bus Clock > 83.3 MHz. According to timing
@@ -457,18 +458,18 @@ void local_bus_init (void)
 	 * Errata LBC11.
 	 * Fix Local Bus clock glitch when DLL is enabled.
 	 *
-	 * If localbus freq is < 66Mhz, DLL bypass mode must be used.
-	 * If localbus freq is > 133Mhz, DLL can be safely enabled.
+	 * If localbus freq is < 66MHz, DLL bypass mode must be used.
+	 * If localbus freq is > 133MHz, DLL can be safely enabled.
 	 * Between 66 and 133, the DLL is enabled with an override workaround.
 	 */
 
 	if (lbc_mhz < 66) {
-		lbc->lcrr = CFG_LBC_LCRR | LCRR_DBYP;	/* DLL Bypass */
+		lbc->lcrr = CONFIG_SYS_LBC_LCRR | LCRR_DBYP;	/* DLL Bypass */
 		lbc->ltedr = LTEDR_BMD | LTEDR_PARD | LTEDR_WPD | LTEDR_WARA |
 			     LTEDR_RAWA | LTEDR_CSD;	/* Disable all error checking */
 
 	} else if (lbc_mhz >= 133) {
-		lbc->lcrr = CFG_LBC_LCRR & (~LCRR_DBYP);	/* DLL Enabled */
+		lbc->lcrr = CONFIG_SYS_LBC_LCRR & (~LCRR_DBYP);	/* DLL Enabled */
 
 	} else {
 		/*
@@ -483,7 +484,7 @@ void local_bus_init (void)
 			lbc->lcrr = 0x10000004;
 		}
 
-		lbc->lcrr = CFG_LBC_LCRR & (~LCRR_DBYP);	/* DLL Enabled */
+		lbc->lcrr = CONFIG_SYS_LBC_LCRR & (~LCRR_DBYP);	/* DLL Enabled */
 		udelay (200);
 
 		/*
@@ -502,10 +503,10 @@ void local_bus_init (void)
 	 * set if Local Bus Clock is > 83 MHz.
 	 */
 	if (lbc_mhz > 83)
-		out_be32 (&lbc->or2, CFG_OR2_CAN | OR_UPM_EAD);
+		out_be32 (&lbc->or2, CONFIG_SYS_OR2_CAN | OR_UPM_EAD);
 	else
-		out_be32 (&lbc->or2, CFG_OR2_CAN);
-	out_be32 (&lbc->br2, CFG_BR2_CAN);
+		out_be32 (&lbc->or2, CONFIG_SYS_OR2_CAN);
+	out_be32 (&lbc->br2, CONFIG_SYS_BR2_CAN);
 
 	/* LGPL4 is UPWAIT */
 	out_be32(&lbc->mcmr, MxMR_DSx_3_CYCL | MxMR_GPL_x4DIS | MxMR_WLFx_3X);
@@ -537,6 +538,9 @@ void local_bus_init (void)
  */
 static int first_free_busno;
 
+extern int fsl_pci_setup_inbound_windows(struct pci_region *r);
+extern void fsl_pci_init(struct pci_controller *hose);
+
 #if defined(CONFIG_PCI) || defined(CONFIG_PCI1)
 static struct pci_controller pci1_hose;
 #endif /* CONFIG_PCI || CONFIG_PCI1 */
@@ -547,12 +551,12 @@ static struct pci_controller pcie1_hose;
 
 static inline void init_pci1(void)
 {
-	volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR);
+	volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
 #if defined(CONFIG_PCI) || defined(CONFIG_PCI1)
 	uint host_agent = (gur->porbmsr & MPC85xx_PORBMSR_HA) >> 16;
-	volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *)CFG_PCI1_ADDR;
-	extern void fsl_pci_init(struct pci_controller *hose);
+	volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *)CONFIG_SYS_PCI1_ADDR;
 	struct pci_controller *hose = &pci1_hose;
+	struct pci_region *r = hose->regions;
 
 	/* PORDEVSR[15] */
 	uint pci_32 = gur->pordevsr & MPC85xx_PORDEVSR_PCI1_PCI32;
@@ -577,28 +581,23 @@ static inline void init_pci1(void)
 
 
 		/* inbound */
-		pci_set_region (hose->regions + 0,
-				CFG_PCI_MEMORY_BUS,
-				CFG_PCI_MEMORY_PHYS,
-				CFG_PCI_MEMORY_SIZE,
-				PCI_REGION_MEM | PCI_REGION_MEMORY);
-
+		r += fsl_pci_setup_inbound_windows(r);
 
 		/* outbound memory */
-		pci_set_region (hose->regions + 1,
-				CFG_PCI1_MEM_BASE,
-				CFG_PCI1_MEM_PHYS,
-				CFG_PCI1_MEM_SIZE,
+		pci_set_region (r++,
+				CONFIG_SYS_PCI1_MEM_BASE,
+				CONFIG_SYS_PCI1_MEM_PHYS,
+				CONFIG_SYS_PCI1_MEM_SIZE,
 				PCI_REGION_MEM);
 
 		/* outbound io */
-		pci_set_region (hose->regions + 2,
-				CFG_PCI1_IO_BASE,
-				CFG_PCI1_IO_PHYS,
-				CFG_PCI1_IO_SIZE,
+		pci_set_region (r++,
+				CONFIG_SYS_PCI1_IO_BASE,
+				CONFIG_SYS_PCI1_IO_PHYS,
+				CONFIG_SYS_PCI1_IO_SIZE,
 				PCI_REGION_IO);
 
-		hose->region_count = 3;
+		hose->region_count = r - hose->regions;
 
 		hose->first_busno = first_free_busno;
 		pci_setup_indirect (hose, (int)&pci->cfg_addr,
@@ -611,7 +610,7 @@ static inline void init_pci1(void)
 
 		first_free_busno = hose->last_busno + 1;
 #ifdef CONFIG_PCIX_CHECK
-		if (!(gur->pordevsr & PORDEVSR_PCI)) {
+		if (!(gur->pordevsr & MPC85xx_PORDEVSR_PCI1)) {
 			ushort reg16 =
 				PCI_X_CMD_MAX_SPLIT | PCI_X_CMD_MAX_READ |
 				PCI_X_CMD_ERO | PCI_X_CMD_DPERR_E;
@@ -635,15 +634,15 @@ static inline void init_pci1(void)
 
 static inline void init_pcie1(void)
 {
-	volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR);
+	volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
 #ifdef CONFIG_PCIE1
 	uint io_sel = (gur->pordevsr & MPC85xx_PORDEVSR_IO_SEL) >> 19;
 	uint host_agent = (gur->porbmsr & MPC85xx_PORBMSR_HA) >> 16;
-	volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *)CFG_PCIE1_ADDR;
-	extern void fsl_pci_init(struct pci_controller *hose);
+	volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *)CONFIG_SYS_PCIE1_ADDR;
 	struct pci_controller *hose = &pcie1_hose;
 	int pcie_ep =  (host_agent == 0) || (host_agent == 2 ) ||
 		(host_agent == 3);
+	struct pci_region *r = hose->regions;
 
 	int pcie_configured  = io_sel >= 1;
 
@@ -659,27 +658,23 @@ static inline void init_pcie1(void)
 		puts ("\n");
 
 		/* inbound */
-		pci_set_region (hose->regions + 0,
-				CFG_PCI_MEMORY_BUS,
-				CFG_PCI_MEMORY_PHYS,
-				CFG_PCI_MEMORY_SIZE,
-				PCI_REGION_MEM | PCI_REGION_MEMORY);
+		r += fsl_pci_setup_inbound_windows(r);
 
 		/* outbound memory */
-		pci_set_region (hose->regions + 1,
-				CFG_PCIE1_MEM_BASE,
-				CFG_PCIE1_MEM_PHYS,
-				CFG_PCIE1_MEM_SIZE,
+		pci_set_region (r++,
+				CONFIG_SYS_PCIE1_MEM_BASE,
+				CONFIG_SYS_PCIE1_MEM_PHYS,
+				CONFIG_SYS_PCIE1_MEM_SIZE,
 				PCI_REGION_MEM);
 
 		/* outbound io */
-		pci_set_region (hose->regions + 2,
-				CFG_PCIE1_IO_BASE,
-				CFG_PCIE1_IO_PHYS,
-				CFG_PCIE1_IO_SIZE,
+		pci_set_region (r++,
+				CONFIG_SYS_PCIE1_IO_BASE,
+				CONFIG_SYS_PCIE1_IO_PHYS,
+				CONFIG_SYS_PCIE1_IO_SIZE,
 				PCI_REGION_IO);
 
-		hose->region_count = 3;
+		hose->region_count = r - hose->regions;
 
 		hose->first_busno = first_free_busno;
 		pci_setup_indirect(hose, (int)&pci->cfg_addr,
@@ -706,31 +701,19 @@ void pci_init_board (void)
 }
 
 #ifdef CONFIG_OF_BOARD_SETUP
+extern void ft_fsl_pci_setup(void *blob, const char *pci_alias,
+			struct pci_controller *hose);
+
 void ft_board_setup (void *blob, bd_t *bd)
 {
-	int node, tmp[2];
-	const char *path;
-
 	ft_cpu_setup (blob, bd);
 
-	node = fdt_path_offset (blob, "/aliases");
-	tmp[0] = 0;
-	if (node >= 0) {
 #if defined(CONFIG_PCI) || defined(CONFIG_PCI1)
-		path = fdt_getprop (blob, node, "pci0", NULL);
-		if (path) {
-			tmp[1] = pci1_hose.last_busno - pci1_hose.first_busno;
-			do_fixup_by_path (blob, path, "bus-range", &tmp, 8, 1);
-		}
-#endif /* CONFIG_PCI || CONFIG_PCI1 */
+	ft_fsl_pci_setup(blob, "pci0", &pci1_hose);
+#endif
 #ifdef CONFIG_PCIE1
-		path = fdt_getprop (blob, node, "pci1", NULL);
-		if (path) {
-			tmp[1] = pcie1_hose.last_busno - pcie1_hose.first_busno;
-			do_fixup_by_path (blob, path, "bus-range", &tmp, 8, 1);
-		}
-#endif /* CONFIG_PCIE1 */
-	}
+	ft_fsl_pci_setup(blob, "pci1", &pcie1_hose);
+#endif
 }
 #endif /* CONFIG_OF_BOARD_SETUP */
 
@@ -743,3 +726,9 @@ int board_early_init_r (void)
 	return (0);
 }
 #endif /* CONFIG_BOARD_EARLY_INIT_R */
+
+int board_eth_init(bd_t *bis)
+{
+	cpu_eth_init(bis);	/* Intialize TSECs first */
+	return pci_eth_init(bis);
+}
diff --git a/board/tqc/tqm85xx/u-boot.lds b/board/tqc/tqm85xx/u-boot.lds
index 8cb551ae4..b1637a516 100644
--- a/board/tqc/tqm85xx/u-boot.lds
+++ b/board/tqc/tqm85xx/u-boot.lds
@@ -141,6 +141,7 @@ SECTIONS
    *(.dynbss)
    *(.bss)
    *(COMMON)
+   . = ALIGN(4);
   }
   _end = . ;
   PROVIDE (end = .);
diff --git a/board/tqc/tqm8xx/Makefile b/board/tqc/tqm8xx/Makefile
index b48934b42..280982dd4 100644
--- a/board/tqc/tqm8xx/Makefile
+++ b/board/tqc/tqm8xx/Makefile
@@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk
 
 LIB	= $(obj)lib$(BOARD).a
 
-COBJS	= $(BOARD).o flash.o load_sernum_ethaddr.o
+COBJS	= $(BOARD).o load_sernum_ethaddr.o
 
 SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
 OBJS	:= $(addprefix $(obj),$(COBJS))
diff --git a/board/tqc/tqm8xx/flash.c b/board/tqc/tqm8xx/flash.c
deleted file mode 100644
index 1231c7c6f..000000000
--- a/board/tqc/tqm8xx/flash.c
+++ /dev/null
@@ -1,834 +0,0 @@
-/*
- * (C) Copyright 2000-2004
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#if 0
-#define DEBUG
-#endif
-
-#include <common.h>
-#include <mpc8xx.h>
-#include <environment.h>
-
-#include <asm/processor.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#if !defined(CONFIG_FLASH_CFI_DRIVER) /* do not use if CFI driver is configured */
-
-#if defined(CONFIG_TQM8xxL) && !defined(CONFIG_TQM866M) \
-    && !defined(CONFIG_TQM885D)
-# ifndef CFG_OR_TIMING_FLASH_AT_50MHZ
-#  define CFG_OR_TIMING_FLASH_AT_50MHZ	(OR_ACS_DIV1  | OR_TRLX | OR_CSNT_SAM | \
-					 OR_SCY_2_CLK | OR_EHTR | OR_BI)
-# endif
-#endif /* CONFIG_TQM8xxL/M, !TQM866M, !TQM885D */
-
-#ifndef	CFG_ENV_ADDR
-#define CFG_ENV_ADDR	(CFG_FLASH_BASE + CFG_ENV_OFFSET)
-#endif
-
-flash_info_t	flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips	*/
-
-/*-----------------------------------------------------------------------
- * Functions
- */
-static ulong flash_get_size (vu_long *addr, flash_info_t *info);
-static int write_word (flash_info_t *info, ulong dest, ulong data);
-
-/*-----------------------------------------------------------------------
- */
-
-unsigned long flash_init (void)
-{
-	volatile immap_t     *immap  = (immap_t *)CFG_IMMR;
-	volatile memctl8xx_t *memctl = &immap->im_memctl;
-	unsigned long size_b0, size_b1;
-	int i;
-
-#ifdef	CFG_OR_TIMING_FLASH_AT_50MHZ
-	int scy, trlx, flash_or_timing, clk_diff;
-
-	scy = (CFG_OR_TIMING_FLASH_AT_50MHZ & OR_SCY_MSK) >> 4;
-	if (CFG_OR_TIMING_FLASH_AT_50MHZ & OR_TRLX) {
-		trlx = OR_TRLX;
-		scy *= 2;
-	} else
-		trlx = 0;
-
-		/* We assume that each 10MHz of bus clock require 1-clk SCY
-		 * adjustment.
-		 */
-	clk_diff = (gd->bus_clk / 1000000) - 50;
-
-		/* We need proper rounding here. This is what the "+5" and "-5"
-		 * are here for.
-		 */
-	if (clk_diff >= 0)
-		scy += (clk_diff + 5) / 10;
-	else
-		scy += (clk_diff - 5) / 10;
-
-		/* For bus frequencies above 50MHz, we want to use relaxed timing
-		 * (OR_TRLX).
-		 */
-	if (gd->bus_clk >= 50000000)
-		trlx = OR_TRLX;
-	else
-		trlx = 0;
-
-	if (trlx)
-		scy /= 2;
-
-	if (scy > 0xf)
-		scy = 0xf;
-	if (scy < 1)
-		scy = 1;
-
-	flash_or_timing = (scy << 4) | trlx |
-	                  (CFG_OR_TIMING_FLASH_AT_50MHZ & ~(OR_TRLX | OR_SCY_MSK));
-#endif
-	/* Init: no FLASHes known */
-	for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) {
-		flash_info[i].flash_id = FLASH_UNKNOWN;
-	}
-
-	/* Static FLASH Bank configuration here - FIXME XXX */
-
-	debug ("\n## Get flash bank 1 size @ 0x%08x\n",FLASH_BASE0_PRELIM);
-
-	size_b0 = flash_get_size((vu_long *)FLASH_BASE0_PRELIM, &flash_info[0]);
-
-	debug ("## Get flash bank 2 size @ 0x%08x\n",FLASH_BASE1_PRELIM);
-
-	if (flash_info[0].flash_id == FLASH_UNKNOWN) {
-		printf ("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n",
-			size_b0, size_b0<<20);
-	}
-
-	size_b1 = flash_get_size((vu_long *)FLASH_BASE1_PRELIM, &flash_info[1]);
-
-	debug ("## Prelim. Flash bank sizes: %08lx + 0x%08lx\n",size_b0,size_b1);
-
-	if (size_b1 > size_b0) {
-		printf ("## ERROR: "
-			"Bank 1 (0x%08lx = %ld MB) > Bank 0 (0x%08lx = %ld MB)\n",
-			size_b1, size_b1<<20,
-			size_b0, size_b0<<20
-		);
-		flash_info[0].flash_id	= FLASH_UNKNOWN;
-		flash_info[1].flash_id	= FLASH_UNKNOWN;
-		flash_info[0].sector_count	= -1;
-		flash_info[1].sector_count	= -1;
-		flash_info[0].size		= 0;
-		flash_info[1].size		= 0;
-		return (0);
-	}
-
-	debug  ("## Before remap: "
-		"BR0: 0x%08x    OR0: 0x%08x    "
-		"BR1: 0x%08x    OR1: 0x%08x\n",
-		memctl->memc_br0, memctl->memc_or0,
-		memctl->memc_br1, memctl->memc_or1);
-
-	/* Remap FLASH according to real size */
-#ifndef	CFG_OR_TIMING_FLASH_AT_50MHZ
-	memctl->memc_or0 = CFG_OR_TIMING_FLASH | (-size_b0 & OR_AM_MSK);
-#else
-	memctl->memc_or0 = flash_or_timing | (-size_b0 & OR_AM_MSK);
-#endif
-	memctl->memc_br0 = (CFG_FLASH_BASE & BR_BA_MSK) | BR_MS_GPCM | BR_V;
-
-	debug ("## BR0: 0x%08x    OR0: 0x%08x\n",
-		memctl->memc_br0, memctl->memc_or0);
-
-	/* Re-do sizing to get full correct info */
-	size_b0 = flash_get_size((vu_long *)CFG_FLASH_BASE, &flash_info[0]);
-
-#if CFG_MONITOR_BASE >= CFG_FLASH_BASE
-	/* monitor protection ON by default */
-	debug ("Protect monitor: %08lx ... %08lx\n",
-		(ulong)CFG_MONITOR_BASE,
-		(ulong)CFG_MONITOR_BASE + monitor_flash_len - 1);
-
-	flash_protect(FLAG_PROTECT_SET,
-		      CFG_MONITOR_BASE,
-		      CFG_MONITOR_BASE + monitor_flash_len - 1,
-		      &flash_info[0]);
-#endif
-
-#ifdef	CFG_ENV_IS_IN_FLASH
-	/* ENV protection ON by default */
-# ifdef CFG_ENV_ADDR_REDUND
-	debug ("Protect primary   environment: %08lx ... %08lx\n",
-		(ulong)CFG_ENV_ADDR,
-		(ulong)CFG_ENV_ADDR + CFG_ENV_SECT_SIZE - 1);
-# else
-	debug ("Protect environment: %08lx ... %08lx\n",
-		(ulong)CFG_ENV_ADDR,
-		(ulong)CFG_ENV_ADDR + CFG_ENV_SECT_SIZE - 1);
-# endif
-
-	flash_protect(FLAG_PROTECT_SET,
-		      CFG_ENV_ADDR,
-		      CFG_ENV_ADDR + CFG_ENV_SECT_SIZE - 1,
-		      &flash_info[0]);
-#endif
-
-#ifdef CFG_ENV_ADDR_REDUND
-	debug ("Protect redundand environment: %08lx ... %08lx\n",
-		(ulong)CFG_ENV_ADDR_REDUND,
-		(ulong)CFG_ENV_ADDR_REDUND + CFG_ENV_SECT_SIZE - 1);
-
-	flash_protect(FLAG_PROTECT_SET,
-		      CFG_ENV_ADDR_REDUND,
-		      CFG_ENV_ADDR_REDUND + CFG_ENV_SECT_SIZE - 1,
-		      &flash_info[0]);
-#endif
-
-	if (size_b1) {
-#ifndef	CFG_OR_TIMING_FLASH_AT_50MHZ
-		memctl->memc_or1 = CFG_OR_TIMING_FLASH | (-size_b1 & 0xFFFF8000);
-#else
-		memctl->memc_or1 = flash_or_timing | (-size_b1 & 0xFFFF8000);
-#endif
-		memctl->memc_br1 = ((CFG_FLASH_BASE + size_b0) & BR_BA_MSK) |
-				    BR_MS_GPCM | BR_V;
-
-		debug ("## BR1: 0x%08x    OR1: 0x%08x\n",
-			memctl->memc_br1, memctl->memc_or1);
-
-		/* Re-do sizing to get full correct info */
-		size_b1 = flash_get_size((vu_long *)(CFG_FLASH_BASE + size_b0),
-					  &flash_info[1]);
-
-#if CFG_MONITOR_BASE >= CFG_FLASH_BASE
-		/* monitor protection ON by default */
-		flash_protect(FLAG_PROTECT_SET,
-			      CFG_MONITOR_BASE,
-			      CFG_MONITOR_BASE+monitor_flash_len-1,
-			      &flash_info[1]);
-#endif
-
-#ifdef	CFG_ENV_IS_IN_FLASH
-		/* ENV protection ON by default */
-		flash_protect(FLAG_PROTECT_SET,
-			      CFG_ENV_ADDR,
-			      CFG_ENV_ADDR+CFG_ENV_SIZE-1,
-			      &flash_info[1]);
-#endif
-	} else {
-		memctl->memc_br1 = 0;		/* invalidate bank */
-
-		flash_info[1].flash_id = FLASH_UNKNOWN;
-		flash_info[1].sector_count = -1;
-		flash_info[1].size = 0;
-
-		debug ("## DISABLE BR1: 0x%08x    OR1: 0x%08x\n",
-			memctl->memc_br1, memctl->memc_or1);
-	}
-
-	debug ("## Final Flash bank sizes: %08lx + 0x%08lx\n",size_b0,size_b1);
-
-	flash_info[0].size = size_b0;
-	flash_info[1].size = size_b1;
-
-	return (size_b0 + size_b1);
-}
-
-/*-----------------------------------------------------------------------
- */
-void flash_print_info  (flash_info_t *info)
-{
-	int i;
-
-	if (info->flash_id == FLASH_UNKNOWN) {
-		printf ("missing or unknown FLASH type\n");
-		return;
-	}
-
-	switch (info->flash_id & FLASH_VENDMASK) {
-	case FLASH_MAN_AMD:	printf ("AMD ");		break;
-	case FLASH_MAN_FUJ:	printf ("FUJITSU ");		break;
-	default:		printf ("Unknown Vendor ");	break;
-	}
-
-	switch (info->flash_id & FLASH_TYPEMASK) {
-#ifdef CONFIG_TQM8xxM	/* mirror bit flash */
-	case FLASH_AMLV128U:	printf ("AM29LV128ML (128Mbit, uniform sector size)\n");
-				break;
-	case FLASH_AMLV320U:	printf ("AM29LV320ML (32Mbit, uniform sector size)\n");
-				break;
-	case FLASH_AMLV640U:	printf ("AM29LV640ML (64Mbit, uniform sector size)\n");
-				break;
-	case FLASH_AMLV320B:	printf ("AM29LV320MB (32Mbit, bottom boot sect)\n");
-				break;
-# else	/* ! TQM8xxM */
-	case FLASH_AM400B:	printf ("AM29LV400B (4 Mbit, bottom boot sect)\n");
-				break;
-	case FLASH_AM400T:	printf ("AM29LV400T (4 Mbit, top boot sector)\n");
-				break;
-	case FLASH_AM800B:	printf ("AM29LV800B (8 Mbit, bottom boot sect)\n");
-				break;
-	case FLASH_AM800T:	printf ("AM29LV800T (8 Mbit, top boot sector)\n");
-				break;
-	case FLASH_AM320B:	printf ("AM29LV320B (32 Mbit, bottom boot sect)\n");
-				break;
-	case FLASH_AM320T:	printf ("AM29LV320T (32 Mbit, top boot sector)\n");
-				break;
-#endif	/* TQM8xxM */
-	case FLASH_AM160B:	printf ("AM29LV160B (16 Mbit, bottom boot sect)\n");
-				break;
-	case FLASH_AM160T:	printf ("AM29LV160T (16 Mbit, top boot sector)\n");
-				break;
-	case FLASH_AMDL163B:	printf ("AM29DL163B (16 Mbit, bottom boot sect)\n");
-				break;
-	default:		printf ("Unknown Chip Type\n");
-				break;
-	}
-
-	printf ("  Size: %ld MB in %d Sectors\n",
-		info->size >> 20, info->sector_count);
-
-	printf ("  Sector Start Addresses:");
-	for (i=0; i<info->sector_count; ++i) {
-		if ((i % 5) == 0)
-			printf ("\n   ");
-		printf (" %08lX%s",
-			info->start[i],
-			info->protect[i] ? " (RO)" : "     "
-		);
-	}
-	printf ("\n");
-	return;
-}
-
-/*-----------------------------------------------------------------------
- */
-
-
-/*-----------------------------------------------------------------------
- */
-
-/*
- * The following code cannot be run from FLASH!
- */
-
-static ulong flash_get_size (vu_long *addr, flash_info_t *info)
-{
-	short i;
-	ulong value;
-	ulong base = (ulong)addr;
-
-	/* Write auto select command: read Manufacturer ID */
-	addr[0x0555] = 0x00AA00AA;
-	addr[0x02AA] = 0x00550055;
-	addr[0x0555] = 0x00900090;
-
-	value = addr[0];
-
-	debug ("Manuf. ID @ 0x%08lx: 0x%08lx\n", (ulong)addr, value);
-
-	switch (value) {
-	case AMD_MANUFACT:
-		debug ("Manufacturer: AMD\n");
-		info->flash_id = FLASH_MAN_AMD;
-		break;
-	case FUJ_MANUFACT:
-		debug ("Manufacturer: FUJITSU\n");
-		info->flash_id = FLASH_MAN_FUJ;
-		break;
-	default:
-		debug ("Manufacturer: *** unknown ***\n");
-		info->flash_id = FLASH_UNKNOWN;
-		info->sector_count = 0;
-		info->size = 0;
-		return (0);			/* no or unknown flash	*/
-	}
-
-	value = addr[1];			/* device ID		*/
-
-	debug ("Device ID @ 0x%08lx: 0x%08lx\n", (ulong)(&addr[1]), value);
-
-	switch (value) {
-#ifdef CONFIG_TQM8xxM	/* mirror bit flash */
-	case AMD_ID_MIRROR:
-		debug ("Mirror Bit flash: addr[14] = %08lX  addr[15] = %08lX\n",
-			addr[14], addr[15]);
-		/* Special case for AMLV320MH/L */
-		if ((addr[14] & 0x00ff00ff) == 0x001d001d &&
-		    (addr[15] & 0x00ff00ff) == 0x00000000) {
-			debug ("Chip: AMLV320MH/L\n");
-			info->flash_id += FLASH_AMLV320U;
-			info->sector_count = 64;
-			info->size = 0x00800000;	/* => 8 MB */
-			break;
-		}
-		switch(addr[14]) {
-		case AMD_ID_LV128U_2:
-			if (addr[15] != AMD_ID_LV128U_3) {
-				debug ("Chip: AMLV128U -> unknown\n");
-				info->flash_id = FLASH_UNKNOWN;
-			} else {
-				debug ("Chip: AMLV128U\n");
-				info->flash_id += FLASH_AMLV128U;
-				info->sector_count = 256;
-				info->size = 0x02000000;
-			}
-			break;				/* => 32 MB	*/
-		case AMD_ID_LV640U_2:
-			if (addr[15] != AMD_ID_LV640U_3) {
-				debug ("Chip: AMLV640U -> unknown\n");
-				info->flash_id = FLASH_UNKNOWN;
-			} else {
-				debug ("Chip: AMLV640U\n");
-				info->flash_id += FLASH_AMLV640U;
-				info->sector_count = 128;
-				info->size = 0x01000000;
-			}
-			break;				/* => 16 MB	*/
-		case AMD_ID_LV320B_2:
-			if (addr[15] != AMD_ID_LV320B_3) {
-				debug ("Chip: AMLV320B -> unknown\n");
-				info->flash_id = FLASH_UNKNOWN;
-			} else {
-				debug ("Chip: AMLV320B\n");
-				info->flash_id += FLASH_AMLV320B;
-				info->sector_count = 71;
-				info->size = 0x00800000;
-			}
-			break;				/* =>  8 MB	*/
-		default:
-			debug ("Chip: *** unknown ***\n");
-			info->flash_id = FLASH_UNKNOWN;
-			break;
-		}
-		break;
-# else	/* ! TQM8xxM */
-	case AMD_ID_LV400T:
-		info->flash_id += FLASH_AM400T;
-		info->sector_count = 11;
-		info->size = 0x00100000;
-		break;					/* => 1 MB		*/
-
-	case AMD_ID_LV400B:
-		info->flash_id += FLASH_AM400B;
-		info->sector_count = 11;
-		info->size = 0x00100000;
-		break;					/* => 1 MB		*/
-
-	case AMD_ID_LV800T:
-		info->flash_id += FLASH_AM800T;
-		info->sector_count = 19;
-		info->size = 0x00200000;
-		break;					/* => 2 MB	*/
-
-	case AMD_ID_LV800B:
-		info->flash_id += FLASH_AM800B;
-		info->sector_count = 19;
-		info->size = 0x00200000;
-		break;					/* => 2 MB	*/
-
-	case AMD_ID_LV320T:
-		info->flash_id += FLASH_AM320T;
-		info->sector_count = 71;
-		info->size = 0x00800000;
-		break;					/* => 8 MB	*/
-
-	case AMD_ID_LV320B:
-		info->flash_id += FLASH_AM320B;
-		info->sector_count = 71;
-		info->size = 0x00800000;
-		break;					/* => 8 MB	*/
-#endif	/* TQM8xxM */
-
-	case AMD_ID_LV160T:
-		info->flash_id += FLASH_AM160T;
-		info->sector_count = 35;
-		info->size = 0x00400000;
-		break;					/* => 4 MB	*/
-
-	case AMD_ID_LV160B:
-		info->flash_id += FLASH_AM160B;
-		info->sector_count = 35;
-		info->size = 0x00400000;
-		break;					/* => 4 MB	*/
-
-	case AMD_ID_DL163B:
-		info->flash_id += FLASH_AMDL163B;
-		info->sector_count = 39;
-		info->size = 0x00400000;
-		break;					/* => 4 MB	*/
-
-	default:
-		info->flash_id = FLASH_UNKNOWN;
-		return (0);			/* => no or unknown flash */
-	}
-
-	/* set up sector start address table */
-	switch (value) {
-#ifdef CONFIG_TQM8xxM	/* mirror bit flash */
-	case AMD_ID_MIRROR:
-		switch (info->flash_id & FLASH_TYPEMASK) {
-			/* only known types here - no default */
-		case FLASH_AMLV128U:
-		case FLASH_AMLV640U:
-		case FLASH_AMLV320U:
-			for (i = 0; i < info->sector_count; i++) {
-				info->start[i] = base;
-				base += 0x20000;
-			}
-			break;
-		case FLASH_AMLV320B:
-			for (i = 0; i < info->sector_count; i++) {
-				info->start[i] = base;
-				/*
-				 * The first 8 sectors are 8 kB,
-				 * all the other ones  are 64 kB
-				 */
-				base += (i < 8)
-					?  2 * ( 8 << 10)
-					:  2 * (64 << 10);
-			}
-			break;
-		}
-		break;
-# else	/* ! TQM8xxM */
-	case AMD_ID_LV400B:
-	case AMD_ID_LV800B:
-		/* set sector offsets for bottom boot block type	*/
-		info->start[0] = base + 0x00000000;
-		info->start[1] = base + 0x00008000;
-		info->start[2] = base + 0x0000C000;
-		info->start[3] = base + 0x00010000;
-		for (i = 4; i < info->sector_count; i++) {
-			info->start[i] = base + (i * 0x00020000) - 0x00060000;
-		}
-		break;
-	case AMD_ID_LV400T:
-	case AMD_ID_LV800T:
-		/* set sector offsets for top boot block type		*/
-		i = info->sector_count - 1;
-		info->start[i--] = base + info->size - 0x00008000;
-		info->start[i--] = base + info->size - 0x0000C000;
-		info->start[i--] = base + info->size - 0x00010000;
-		for (; i >= 0; i--) {
-			info->start[i] = base + i * 0x00020000;
-		}
-		break;
-	case AMD_ID_LV320B:
-		for (i = 0; i < info->sector_count; i++) {
-			info->start[i] = base;
-			/*
-			 * The first 8 sectors are 8 kB,
-			 * all the other ones  are 64 kB
-			 */
-			base += (i < 8)
-				?  2 * ( 8 << 10)
-				:  2 * (64 << 10);
-		}
-		break;
-	case AMD_ID_LV320T:
-		for (i = 0; i < info->sector_count; i++) {
-			info->start[i] = base;
-			/*
-			 * The last 8 sectors are 8 kB,
-			 * all the other ones  are 64 kB
-			 */
-			base += (i < (info->sector_count - 8))
-				?  2 * (64 << 10)
-				:  2 * ( 8 << 10);
-		}
-		break;
-#endif	/* TQM8xxM */
-	case AMD_ID_LV160B:
-		/* set sector offsets for bottom boot block type	*/
-		info->start[0] = base + 0x00000000;
-		info->start[1] = base + 0x00008000;
-		info->start[2] = base + 0x0000C000;
-		info->start[3] = base + 0x00010000;
-		for (i = 4; i < info->sector_count; i++) {
-			info->start[i] = base + (i * 0x00020000) - 0x00060000;
-		}
-		break;
-	case AMD_ID_LV160T:
-		/* set sector offsets for top boot block type		*/
-		i = info->sector_count - 1;
-		info->start[i--] = base + info->size - 0x00008000;
-		info->start[i--] = base + info->size - 0x0000C000;
-		info->start[i--] = base + info->size - 0x00010000;
-		for (; i >= 0; i--) {
-			info->start[i] = base + i * 0x00020000;
-		}
-		break;
-	case AMD_ID_DL163B:
-		for (i = 0; i < info->sector_count; i++) {
-			info->start[i] = base;
-			/*
-			 * The first 8 sectors are 8 kB,
-			 * all the other ones  are 64 kB
-			 */
-			base += (i < 8)
-				?  2 * ( 8 << 10)
-				:  2 * (64 << 10);
-		}
-		break;
-	default:
-		return (0);
-		break;
-	}
-
-#if 0
-	/* check for protected sectors */
-	for (i = 0; i < info->sector_count; i++) {
-		/* read sector protection at sector address, (A7 .. A0) = 0x02 */
-		/* D0 = 1 if protected */
-		addr = (volatile unsigned long *)(info->start[i]);
-		info->protect[i] = addr[2] & 1;
-	}
-#endif
-
-	/*
-	 * Prevent writes to uninitialized FLASH.
-	 */
-	if (info->flash_id != FLASH_UNKNOWN) {
-		addr = (volatile unsigned long *)info->start[0];
-
-		*addr = 0x00F000F0;	/* reset bank */
-	}
-
-	return (info->size);
-}
-
-
-/*-----------------------------------------------------------------------
- */
-
-int	flash_erase (flash_info_t *info, int s_first, int s_last)
-{
-	vu_long *addr = (vu_long*)(info->start[0]);
-	int flag, prot, sect, l_sect;
-	ulong start, now, last;
-
-	debug ("flash_erase: first: %d last: %d\n", s_first, s_last);
-
-	if ((s_first < 0) || (s_first > s_last)) {
-		if (info->flash_id == FLASH_UNKNOWN) {
-			printf ("- missing\n");
-		} else {
-			printf ("- no sectors to erase\n");
-		}
-		return 1;
-	}
-
-	if ((info->flash_id == FLASH_UNKNOWN) ||
-	    (info->flash_id > FLASH_AMD_COMP)) {
-		printf ("Can't erase unknown flash type %08lx - aborted\n",
-			info->flash_id);
-		return 1;
-	}
-
-	prot = 0;
-	for (sect=s_first; sect<=s_last; ++sect) {
-		if (info->protect[sect]) {
-			prot++;
-		}
-	}
-
-	if (prot) {
-		printf ("- Warning: %d protected sectors will not be erased!\n",
-			prot);
-	} else {
-		printf ("\n");
-	}
-
-	l_sect = -1;
-
-	/* Disable interrupts which might cause a timeout here */
-	flag = disable_interrupts();
-
-	addr[0x0555] = 0x00AA00AA;
-	addr[0x02AA] = 0x00550055;
-	addr[0x0555] = 0x00800080;
-	addr[0x0555] = 0x00AA00AA;
-	addr[0x02AA] = 0x00550055;
-
-	/* Start erase on unprotected sectors */
-	for (sect = s_first; sect<=s_last; sect++) {
-		if (info->protect[sect] == 0) {	/* not protected */
-			addr = (vu_long*)(info->start[sect]);
-			addr[0] = 0x00300030;
-			l_sect = sect;
-		}
-	}
-
-	/* re-enable interrupts if necessary */
-	if (flag)
-		enable_interrupts();
-
-	/* wait at least 80us - let's wait 1 ms */
-	udelay (1000);
-
-	/*
-	 * We wait for the last triggered sector
-	 */
-	if (l_sect < 0)
-		goto DONE;
-
-	start = get_timer (0);
-	last  = start;
-	addr = (vu_long*)(info->start[l_sect]);
-	while ((addr[0] & 0x00800080) != 0x00800080) {
-		if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
-			printf ("Timeout\n");
-			return 1;
-		}
-		/* show that we're waiting */
-		if ((now - last) > 1000) {	/* every second */
-			putc ('.');
-			last = now;
-		}
-	}
-
-DONE:
-	/* reset to read mode */
-	addr = (volatile unsigned long *)info->start[0];
-	addr[0] = 0x00F000F0;	/* reset bank */
-
-	printf (" done\n");
-	return 0;
-}
-
-/*-----------------------------------------------------------------------
- * Copy memory to flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-
-int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
-{
-	ulong cp, wp, data;
-	int i, l, rc;
-
-	wp = (addr & ~3);	/* get lower word aligned address */
-
-	/*
-	 * handle unaligned start bytes
-	 */
-	if ((l = addr - wp) != 0) {
-		data = 0;
-		for (i=0, cp=wp; i<l; ++i, ++cp) {
-			data = (data << 8) | (*(uchar *)cp);
-		}
-		for (; i<4 && cnt>0; ++i) {
-			data = (data << 8) | *src++;
-			--cnt;
-			++cp;
-		}
-		for (; cnt==0 && i<4; ++i, ++cp) {
-			data = (data << 8) | (*(uchar *)cp);
-		}
-
-		if ((rc = write_word(info, wp, data)) != 0) {
-			return (rc);
-		}
-		wp += 4;
-	}
-
-	/*
-	 * handle word aligned part
-	 */
-	while (cnt >= 4) {
-		data = 0;
-		for (i=0; i<4; ++i) {
-			data = (data << 8) | *src++;
-		}
-		if ((rc = write_word(info, wp, data)) != 0) {
-			return (rc);
-		}
-		wp  += 4;
-		cnt -= 4;
-	}
-
-	if (cnt == 0) {
-		return (0);
-	}
-
-	/*
-	 * handle unaligned tail bytes
-	 */
-	data = 0;
-	for (i=0, cp=wp; i<4 && cnt>0; ++i, ++cp) {
-		data = (data << 8) | *src++;
-		--cnt;
-	}
-	for (; i<4; ++i, ++cp) {
-		data = (data << 8) | (*(uchar *)cp);
-	}
-
-	return (write_word(info, wp, data));
-}
-
-/*-----------------------------------------------------------------------
- * Write a word to Flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-static int write_word (flash_info_t *info, ulong dest, ulong data)
-{
-	vu_long *addr = (vu_long*)(info->start[0]);
-	ulong start;
-	int flag;
-
-	/* Check if Flash is (sufficiently) erased */
-	if ((*((vu_long *)dest) & data) != data) {
-		return (2);
-	}
-	/* Disable interrupts which might cause a timeout here */
-	flag = disable_interrupts();
-
-	addr[0x0555] = 0x00AA00AA;
-	addr[0x02AA] = 0x00550055;
-	addr[0x0555] = 0x00A000A0;
-
-	*((vu_long *)dest) = data;
-
-	/* re-enable interrupts if necessary */
-	if (flag)
-		enable_interrupts();
-
-	/* data polling for D7 */
-	start = get_timer (0);
-	while ((*((vu_long *)dest) & 0x00800080) != (data & 0x00800080)) {
-		if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
-			return (1);
-		}
-	}
-	return (0);
-}
-
-/*-----------------------------------------------------------------------
- */
-
-#endif /* !defined(CONFIG_FLASH_CFI_DRIVER) */
diff --git a/board/tqc/tqm8xx/load_sernum_ethaddr.c b/board/tqc/tqm8xx/load_sernum_ethaddr.c
index 143f36801..d2699020d 100644
--- a/board/tqc/tqm8xx/load_sernum_ethaddr.c
+++ b/board/tqc/tqm8xx/load_sernum_ethaddr.c
@@ -52,21 +52,21 @@
 void load_sernum_ethaddr (void)
 {
 	unsigned char *hwi;
-	unsigned char  serial [CFG_HWINFO_SIZE];
-	unsigned char  ethaddr[CFG_HWINFO_SIZE];
+	unsigned char  serial [CONFIG_SYS_HWINFO_SIZE];
+	unsigned char  ethaddr[CONFIG_SYS_HWINFO_SIZE];
 	unsigned short ih, is, ie, part;
 
-	hwi = (unsigned char *)(CFG_FLASH_BASE + CFG_HWINFO_OFFSET);
+	hwi = (unsigned char *)(CONFIG_SYS_FLASH_BASE + CONFIG_SYS_HWINFO_OFFSET);
 	ih = is = ie = 0;
 
-	if (*((unsigned long *)hwi) != (unsigned long)CFG_HWINFO_MAGIC) {
+	if (*((unsigned long *)hwi) != (unsigned long)CONFIG_SYS_HWINFO_MAGIC) {
 		return;
 	}
 
 	part = 1;
 
 	/* copy serial # / MAC address */
-	while ((hwi[ih] != '\0') && (ih < CFG_HWINFO_SIZE)) {
+	while ((hwi[ih] != '\0') && (ih < CONFIG_SYS_HWINFO_SIZE)) {
 		if (hwi[ih] < ' ' || hwi[ih] > '~') { /* ASCII strings! */
 			return;
 		}
diff --git a/board/tqc/tqm8xx/tqm8xx.c b/board/tqc/tqm8xx/tqm8xx.c
index 96b6103fc..e065d69dd 100644
--- a/board/tqc/tqm8xx/tqm8xx.c
+++ b/board/tqc/tqm8xx/tqm8xx.c
@@ -1,5 +1,5 @@
 /*
- * (C) Copyright 2000-2006
+ * (C) Copyright 2000-2008
  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
  *
  * See file CREDITS for list of people who contributed to this
@@ -21,16 +21,14 @@
  * MA 02111-1307 USA
  */
 
-#if 0
-#define DEBUG
-#endif
-
 #include <common.h>
 #include <mpc8xx.h>
 #ifdef CONFIG_PS2MULT
 #include <ps2mult.h>
 #endif
 
+extern flash_info_t flash_info[];	/* FLASH chips info */
+
 DECLARE_GLOBAL_DATA_PTR;
 
 static long int dram_size (long int, long int *, long int);
@@ -141,7 +139,7 @@ int checkboard (void)
 
 phys_size_t initdram (int board_type)
 {
-	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
 	volatile memctl8xx_t *memctl = &immap->im_memctl;
 	long int size8, size9, size10;
 	long int size_b0 = 0;
@@ -156,7 +154,7 @@ phys_size_t initdram (int board_type)
 	 * with two SDRAM banks or four cycles every 31.2 us with one
 	 * bank. It will be adjusted after memory sizing.
 	 */
-	memctl->memc_mptpr = CFG_MPTPR_2BK_8K;
+	memctl->memc_mptpr = CONFIG_SYS_MPTPR_2BK_8K;
 
 	/*
 	 * The following value is used as an address (i.e. opcode) for
@@ -178,19 +176,19 @@ phys_size_t initdram (int board_type)
 	 * preliminary addresses - these have to be modified after the
 	 * SDRAM size has been determined.
 	 */
-	memctl->memc_or2 = CFG_OR2_PRELIM;
-	memctl->memc_br2 = CFG_BR2_PRELIM;
+	memctl->memc_or2 = CONFIG_SYS_OR2_PRELIM;
+	memctl->memc_br2 = CONFIG_SYS_BR2_PRELIM;
 
 #ifndef	CONFIG_CAN_DRIVER
 	if ((board_type != 'L') &&
 	    (board_type != 'M') &&
 	    (board_type != 'D') ) {	/* only one SDRAM bank on L, M and D modules */
-		memctl->memc_or3 = CFG_OR3_PRELIM;
-		memctl->memc_br3 = CFG_BR3_PRELIM;
+		memctl->memc_or3 = CONFIG_SYS_OR3_PRELIM;
+		memctl->memc_br3 = CONFIG_SYS_BR3_PRELIM;
 	}
 #endif							/* CONFIG_CAN_DRIVER */
 
-	memctl->memc_mamr = CFG_MAMR_8COL & (~(MAMR_PTAE));	/* no refresh yet */
+	memctl->memc_mamr = CONFIG_SYS_MAMR_8COL & (~(MAMR_PTAE));	/* no refresh yet */
 
 	udelay (200);
 
@@ -221,7 +219,7 @@ phys_size_t initdram (int board_type)
 	 *
 	 * try 8 column mode
 	 */
-	size8 = dram_size (CFG_MAMR_8COL, SDRAM_BASE2_PRELIM, SDRAM_MAX_SIZE);
+	size8 = dram_size (CONFIG_SYS_MAMR_8COL, SDRAM_BASE2_PRELIM, SDRAM_MAX_SIZE);
 	debug ("SDRAM Bank 0 in 8 column mode: %ld MB\n", size8 >> 20);
 
 	udelay (1000);
@@ -229,30 +227,30 @@ phys_size_t initdram (int board_type)
 	/*
 	 * try 9 column mode
 	 */
-	size9 = dram_size (CFG_MAMR_9COL, SDRAM_BASE2_PRELIM, SDRAM_MAX_SIZE);
+	size9 = dram_size (CONFIG_SYS_MAMR_9COL, SDRAM_BASE2_PRELIM, SDRAM_MAX_SIZE);
 	debug ("SDRAM Bank 0 in 9 column mode: %ld MB\n", size9 >> 20);
 
 	udelay(1000);
 
-#if defined(CFG_MAMR_10COL)
+#if defined(CONFIG_SYS_MAMR_10COL)
 	/*
 	 * try 10 column mode
 	 */
-	size10 = dram_size (CFG_MAMR_10COL, SDRAM_BASE2_PRELIM, SDRAM_MAX_SIZE);
+	size10 = dram_size (CONFIG_SYS_MAMR_10COL, SDRAM_BASE2_PRELIM, SDRAM_MAX_SIZE);
 	debug ("SDRAM Bank 0 in 10 column mode: %ld MB\n", size10 >> 20);
 #else
 	size10 = 0;
-#endif /* CFG_MAMR_10COL */
+#endif /* CONFIG_SYS_MAMR_10COL */
 
 	if ((size8 < size10) && (size9 < size10)) {
 		size_b0 = size10;
 	} else if ((size8 < size9) && (size10 < size9)) {
 		size_b0 = size9;
-		memctl->memc_mamr = CFG_MAMR_9COL;
+		memctl->memc_mamr = CONFIG_SYS_MAMR_9COL;
 		udelay (500);
 	} else {
 		size_b0 = size8;
-		memctl->memc_mamr = CFG_MAMR_8COL;
+		memctl->memc_mamr = CONFIG_SYS_MAMR_8COL;
 		udelay (500);
 	}
 	debug ("SDRAM Bank 0: %ld MB\n", size_b0 >> 20);
@@ -283,7 +281,7 @@ phys_size_t initdram (int board_type)
 	 */
 	if ((size_b0 < 0x02000000) && (size_b1 < 0x02000000)) {
 		/* reduce to 15.6 us (62.4 us / quad) */
-		memctl->memc_mptpr = CFG_MPTPR_2BK_4K;
+		memctl->memc_mptpr = CONFIG_SYS_MPTPR_2BK_4K;
 		udelay (1000);
 	}
 
@@ -292,15 +290,15 @@ phys_size_t initdram (int board_type)
 	 */
 	if (size_b1 > size_b0) {	/* SDRAM Bank 1 is bigger - map first   */
 
-		memctl->memc_or3 = ((-size_b1) & 0xFFFF0000) | CFG_OR_TIMING_SDRAM;
-		memctl->memc_br3 = (CFG_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V;
+		memctl->memc_or3 = ((-size_b1) & 0xFFFF0000) | CONFIG_SYS_OR_TIMING_SDRAM;
+		memctl->memc_br3 = (CONFIG_SYS_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V;
 
 		if (size_b0 > 0) {
 			/*
 			 * Position Bank 0 immediately above Bank 1
 			 */
-			memctl->memc_or2 = ((-size_b0) & 0xFFFF0000) | CFG_OR_TIMING_SDRAM;
-			memctl->memc_br2 = ((CFG_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V)
+			memctl->memc_or2 = ((-size_b0) & 0xFFFF0000) | CONFIG_SYS_OR_TIMING_SDRAM;
+			memctl->memc_br2 = ((CONFIG_SYS_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V)
 					   + size_b1;
 		} else {
 			unsigned long reg;
@@ -314,24 +312,24 @@ phys_size_t initdram (int board_type)
 
 			/* adjust refresh rate depending on SDRAM type, one bank */
 			reg = memctl->memc_mptpr;
-			reg >>= 1;			/* reduce to CFG_MPTPR_1BK_8K / _4K */
+			reg >>= 1;			/* reduce to CONFIG_SYS_MPTPR_1BK_8K / _4K */
 			memctl->memc_mptpr = reg;
 		}
 
 	} else {					/* SDRAM Bank 0 is bigger - map first   */
 
-		memctl->memc_or2 = ((-size_b0) & 0xFFFF0000) | CFG_OR_TIMING_SDRAM;
+		memctl->memc_or2 = ((-size_b0) & 0xFFFF0000) | CONFIG_SYS_OR_TIMING_SDRAM;
 		memctl->memc_br2 =
-				(CFG_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V;
+				(CONFIG_SYS_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V;
 
 		if (size_b1 > 0) {
 			/*
 			 * Position Bank 1 immediately above Bank 0
 			 */
 			memctl->memc_or3 =
-					((-size_b1) & 0xFFFF0000) | CFG_OR_TIMING_SDRAM;
+					((-size_b1) & 0xFFFF0000) | CONFIG_SYS_OR_TIMING_SDRAM;
 			memctl->memc_br3 =
-					((CFG_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V)
+					((CONFIG_SYS_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V)
 					+ size_b0;
 		} else {
 			unsigned long reg;
@@ -347,7 +345,7 @@ phys_size_t initdram (int board_type)
 
 			/* adjust refresh rate depending on SDRAM type, one bank */
 			reg = memctl->memc_mptpr;
-			reg >>= 1;			/* reduce to CFG_MPTPR_1BK_8K / _4K */
+			reg >>= 1;			/* reduce to CONFIG_SYS_MPTPR_1BK_8K / _4K */
 			memctl->memc_mptpr = reg;
 		}
 	}
@@ -358,8 +356,8 @@ phys_size_t initdram (int board_type)
 	/* UPM initialization for CAN @ CLKOUT <= 66 MHz */
 
 	/* Initialize OR3 / BR3 */
-	memctl->memc_or3 = CFG_OR3_CAN;
-	memctl->memc_br3 = CFG_BR3_CAN;
+	memctl->memc_or3 = CONFIG_SYS_OR3_CAN;
+	memctl->memc_br3 = CONFIG_SYS_BR3_CAN;
 
 	/* Initialize MBMR */
 	memctl->memc_mbmr = MBMR_GPL_B4DIS;	/* GPL_B4 ouput line Disable */
@@ -399,11 +397,9 @@ phys_size_t initdram (int board_type)
 
 #ifdef	CONFIG_ISP1362_USB
 	/* Initialize OR5 / BR5 */
-	memctl->memc_or5 = CFG_OR5_ISP1362;
-	memctl->memc_br5 = CFG_BR5_ISP1362;
+	memctl->memc_or5 = CONFIG_SYS_OR5_ISP1362;
+	memctl->memc_br5 = CONFIG_SYS_BR5_ISP1362;
 #endif							/* CONFIG_ISP1362_USB */
-
-
 	return (size_b0 + size_b1);
 }
 
@@ -419,7 +415,7 @@ phys_size_t initdram (int board_type)
 
 static long int dram_size (long int mamr_value, long int *base, long int maxsize)
 {
-	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
 	volatile memctl8xx_t *memctl = &immap->im_memctl;
 
 	memctl->memc_mamr = mamr_value;
@@ -451,29 +447,117 @@ int board_early_init_r (void)
 
 #endif /* CONFIG_PS2MULT */
 
-/* ---------------------------------------------------------------------------- */
-/* HMI10 specific stuff								*/
-/* ---------------------------------------------------------------------------- */
-#ifdef CONFIG_HMI10
 
+#ifdef CONFIG_MISC_INIT_R
 int misc_init_r (void)
 {
-# ifdef CONFIG_IDE_LED
-	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
+	volatile memctl8xx_t *memctl = &immap->im_memctl;
+
+#ifdef	CONFIG_SYS_OR_TIMING_FLASH_AT_50MHZ
+	int scy, trlx, flash_or_timing, clk_diff;
+
+	scy = (CONFIG_SYS_OR_TIMING_FLASH_AT_50MHZ & OR_SCY_MSK) >> 4;
+	if (CONFIG_SYS_OR_TIMING_FLASH_AT_50MHZ & OR_TRLX) {
+		trlx = OR_TRLX;
+		scy *= 2;
+	} else {
+		trlx = 0;
+	}
 
+	/*
+	 * We assume that each 10MHz of bus clock require 1-clk SCY
+	 * adjustment.
+	 */
+	clk_diff = (gd->bus_clk / 1000000) - 50;
+
+	/*
+	 * We need proper rounding here. This is what the "+5" and "-5"
+	 * are here for.
+	 */
+	if (clk_diff >= 0)
+		scy += (clk_diff + 5) / 10;
+	else
+		scy += (clk_diff - 5) / 10;
+
+	/*
+	 * For bus frequencies above 50MHz, we want to use relaxed timing
+	 * (OR_TRLX).
+	 */
+	if (gd->bus_clk >= 50000000)
+		trlx = OR_TRLX;
+	else
+		trlx = 0;
+
+	if (trlx)
+		scy /= 2;
+
+	if (scy > 0xf)
+		scy = 0xf;
+	if (scy < 1)
+		scy = 1;
+
+	flash_or_timing = (scy << 4) | trlx |
+		(CONFIG_SYS_OR_TIMING_FLASH_AT_50MHZ & ~(OR_TRLX | OR_SCY_MSK));
+
+	memctl->memc_or0 =
+		flash_or_timing | (-flash_info[0].size & OR_AM_MSK);
+#else
+	memctl->memc_or0 =
+		CONFIG_SYS_OR_TIMING_FLASH | (-flash_info[0].size & OR_AM_MSK);
+#endif
+	memctl->memc_br0 = (CONFIG_SYS_FLASH_BASE & BR_BA_MSK) | BR_MS_GPCM | BR_V;
+
+	debug ("## BR0: 0x%08x    OR0: 0x%08x\n",
+	       memctl->memc_br0, memctl->memc_or0);
+
+	if (flash_info[1].size) {
+#ifdef	CONFIG_SYS_OR_TIMING_FLASH_AT_50MHZ
+		memctl->memc_or1 = flash_or_timing |
+			(-flash_info[1].size & 0xFFFF8000);
+#else
+		memctl->memc_or1 = CONFIG_SYS_OR_TIMING_FLASH |
+			(-flash_info[1].size & 0xFFFF8000);
+#endif
+		memctl->memc_br1 =
+			((CONFIG_SYS_FLASH_BASE +
+			  flash_info[0].
+			  size) & BR_BA_MSK) | BR_MS_GPCM | BR_V;
+
+		debug ("## BR1: 0x%08x    OR1: 0x%08x\n",
+		       memctl->memc_br1, memctl->memc_or1);
+	} else {
+		memctl->memc_br1 = 0;	/* invalidate bank */
+
+		debug ("## DISABLE BR1: 0x%08x    OR1: 0x%08x\n",
+		       memctl->memc_br1, memctl->memc_or1);
+	}
+
+# ifdef CONFIG_IDE_LED
 	/* Configure PA15 as output port */
 	immap->im_ioport.iop_padir |= 0x0001;
 	immap->im_ioport.iop_paodr |= 0x0001;
 	immap->im_ioport.iop_papar &= ~0x0001;
 	immap->im_ioport.iop_padat &= ~0x0001;	/* turn it off */
 # endif
+
+#ifdef CONFIG_NSCU
+	/* wake up ethernet module */
+	immap->im_ioport.iop_pcpar &= ~0x0004;	/* GPIO pin      */
+	immap->im_ioport.iop_pcdir |= 0x0004;	/* output        */
+	immap->im_ioport.iop_pcso &= ~0x0004;	/* for clarity   */
+	immap->im_ioport.iop_pcdat |= 0x0004;	/* enable        */
+#endif /* CONFIG_NSCU */
+
 	return (0);
 }
+#endif	/* CONFIG_MISC_INIT_R */
+
 
 # ifdef CONFIG_IDE_LED
 void ide_led (uchar led, uchar status)
 {
-	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
 
 	/* We have one led for both pcmcia slots */
 	if (status) {				/* led on */
@@ -483,26 +567,34 @@ void ide_led (uchar led, uchar status)
 	}
 }
 # endif
-#endif	/* CONFIG_HMI10 */
 
-/* ---------------------------------------------------------------------------- */
-/* NSCU specific stuff								*/
-/* ---------------------------------------------------------------------------- */
-#ifdef CONFIG_NSCU
+#ifdef CONFIG_LCD_INFO
+#include <lcd.h>
+#include <version.h>
+#include <timestamp.h>
 
-int misc_init_r (void)
+void lcd_show_board_info(void)
 {
-	volatile immap_t *immr = (immap_t *) CFG_IMMR;
-
-	/* wake up ethernet module */
-	immr->im_ioport.iop_pcpar &= ~0x0004; /* GPIO pin	*/
-	immr->im_ioport.iop_pcdir |=  0x0004; /* output		*/
-	immr->im_ioport.iop_pcso  &= ~0x0004; /* for clarity	*/
-	immr->im_ioport.iop_pcdat |=  0x0004; /* enable		*/
-
-	return (0);
+	char temp[32];
+
+	lcd_printf ("%s (%s - %s)\n", U_BOOT_VERSION, U_BOOT_DATE, U_BOOT_TIME);
+	lcd_printf ("(C) 2008 DENX Software Engineering GmbH\n");
+	lcd_printf ("    Wolfgang DENK, wd@denx.de\n");
+#ifdef CONFIG_LCD_INFO_BELOW_LOGO
+	lcd_printf ("MPC823 CPU at %s MHz\n",
+		strmhz(temp, gd->cpu_clk));
+	lcd_printf ("  %ld MB RAM, %ld MB Flash\n",
+		gd->ram_size >> 20,
+		gd->bd->bi_flashsize >> 20 );
+#else
+	/* leave one blank line */
+	lcd_printf ("\nMPC823 CPU at %s MHz, %ld MB RAM, %ld MB Flash\n",
+		strmhz(temp, gd->cpu_clk),
+		gd->ram_size >> 20,
+		gd->bd->bi_flashsize >> 20 );
+#endif /* CONFIG_LCD_INFO_BELOW_LOGO */
 }
-#endif	/* CONFIG_NSCU */
+#endif /* CONFIG_LCD_INFO */
 
 /* ---------------------------------------------------------------------------- */
 /* TK885D specific initializaion						*/
@@ -548,7 +640,4 @@ int last_stage_init(void)
 
 	return 0;
 }
-
 #endif
-
-/* ------------------------------------------------------------------------- */
diff --git a/board/tqc/tqm8xx/u-boot.lds b/board/tqc/tqm8xx/u-boot.lds
index 8c46e4677..5af36c97a 100644
--- a/board/tqc/tqm8xx/u-boot.lds
+++ b/board/tqc/tqm8xx/u-boot.lds
@@ -66,7 +66,7 @@ SECTIONS
     lib_ppc/time.o		(.text)
 
     . = DEFINED(env_offset) ? env_offset : .;
-    common/environment.o	(.ppcenv)
+    common/env_embedded.o	(.ppcenv)
 
     *(.text)
     *(.fixup)
@@ -137,6 +137,7 @@ SECTIONS
    *(.dynbss)
    *(.bss)
    *(COMMON)
+   . = ALIGN(4);
   }
   _end = . ;
   PROVIDE (end = .);
diff --git a/board/tqc/tqm8xx/u-boot.lds.debug b/board/tqc/tqm8xx/u-boot.lds.debug
index c33581d25..ea8538900 100644
--- a/board/tqc/tqm8xx/u-boot.lds.debug
+++ b/board/tqc/tqm8xx/u-boot.lds.debug
@@ -61,7 +61,7 @@ SECTIONS
     lib_generic/crc32.o		(.text)
 
     . = env_offset;
-    common/environment.o(.text)
+    common/env_embedded.o(.text)
 
     *(.text)
     *(.fixup)
diff --git a/board/trab/Makefile b/board/trab/Makefile
index 2402577a5..30e5fbbb3 100644
--- a/board/trab/Makefile
+++ b/board/trab/Makefile
@@ -50,7 +50,9 @@ $(LIB):	$(obj).depend $(OBJS) $(SOBJS)
 $(obj)trab_fkt.srec:	$(OBJS_FKT) $(LIB)
 	$(LD) -g -Ttext $(LOAD_ADDR) -o $(<:.o=) -e trab_fkt $^ $(LIB) \
 		-L$(obj)../../examples -lstubs \
-		-L$(gcclibdir) -lgcc
+		-L$(obj)../../lib_generic -lgeneric \
+		$(obj)../../lib_arm/div0.o \
+		$(obj)../../lib_arm/_*.o
 	$(OBJCOPY) -O srec $(<:.o=) $@
 
 $(obj)trab_fkt.bin:	$(obj)trab_fkt.srec
diff --git a/board/trab/auto_update.c b/board/trab/auto_update.c
index 46110cc76..99327906b 100644
--- a/board/trab/auto_update.c
+++ b/board/trab/auto_update.c
@@ -28,7 +28,7 @@
 #include <asm/byteorder.h>
 #include <usb.h>
 
-#ifdef CFG_HUSH_PARSER
+#ifdef CONFIG_SYS_HUSH_PARSER
 #include <hush.h>
 #endif
 
@@ -42,8 +42,8 @@
 #error "must define CONFIG_USB_STORAGE"
 #endif
 
-#ifndef CFG_HUSH_PARSER
-#error "must define CFG_HUSH_PARSER"
+#ifndef CONFIG_SYS_HUSH_PARSER
+#error "must define CONFIG_SYS_HUSH_PARSER"
 #endif
 
 #if !defined(CONFIG_CMD_FAT)
diff --git a/board/trab/flash.c b/board/trab/flash.c
index 3e8f105a0..317b61d87 100644
--- a/board/trab/flash.c
+++ b/board/trab/flash.c
@@ -28,7 +28,7 @@
 
 static ulong flash_get_size (vu_long *addr, flash_info_t *info);
 
-flash_info_t flash_info[CFG_MAX_FLASH_BANKS];
+flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];
 
 
 #define CMD_READ_ARRAY		0x00F000F0
@@ -42,9 +42,9 @@ flash_info_t flash_info[CFG_MAX_FLASH_BANKS];
 #define CMD_UNLOCK_BYPASS_RES1	0x00900090
 #define CMD_UNLOCK_BYPASS_RES2	0x00000000
 
-#define MEM_FLASH_ADDR		(*(volatile u32 *)CFG_FLASH_BASE)
-#define MEM_FLASH_ADDR1		(*(volatile u32 *)(CFG_FLASH_BASE + (0x00000555 << 2)))
-#define MEM_FLASH_ADDR2		(*(volatile u32 *)(CFG_FLASH_BASE + (0x000002AA << 2)))
+#define MEM_FLASH_ADDR		(*(volatile u32 *)CONFIG_SYS_FLASH_BASE)
+#define MEM_FLASH_ADDR1		(*(volatile u32 *)(CONFIG_SYS_FLASH_BASE + (0x00000555 << 2)))
+#define MEM_FLASH_ADDR2		(*(volatile u32 *)(CONFIG_SYS_FLASH_BASE + (0x000002AA << 2)))
 
 #define BIT_ERASE_DONE		0x00800080
 #define BIT_RDY_MASK		0x00800080
@@ -63,17 +63,17 @@ ulong flash_init (void)
 	int i, j;
 	ulong size = 0;
 
-	for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) {
+	for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
 		ulong flashbase = 0;
 		flash_info_t *info = &flash_info[i];
 
 		/* Init: no FLASHes known */
 		info->flash_id = FLASH_UNKNOWN;
 
-		size += flash_get_size (CFG_FLASH_BASE, info);
+		size += flash_get_size (CONFIG_SYS_FLASH_BASE, info);
 
 		if (i == 0)
-			flashbase = CFG_FLASH_BASE;
+			flashbase = CONFIG_SYS_FLASH_BASE;
 		else
 			panic ("configured too many flash banks!\n");
 		for (j = 0; j < info->sector_count; j++) {
@@ -102,18 +102,18 @@ ulong flash_init (void)
 	 * Protect monitor and environment sectors
 	 */
 	flash_protect ( FLAG_PROTECT_SET,
-			CFG_FLASH_BASE,
-			CFG_FLASH_BASE + monitor_flash_len - 1,
+			CONFIG_SYS_FLASH_BASE,
+			CONFIG_SYS_FLASH_BASE + monitor_flash_len - 1,
 			&flash_info[0]);
 
 	flash_protect ( FLAG_PROTECT_SET,
-			CFG_ENV_ADDR,
-			CFG_ENV_ADDR + CFG_ENV_SIZE - 1, &flash_info[0]);
+			CONFIG_ENV_ADDR,
+			CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1, &flash_info[0]);
 
-#ifdef CFG_ENV_ADDR_REDUND
+#ifdef CONFIG_ENV_ADDR_REDUND
 	flash_protect ( FLAG_PROTECT_SET,
-			CFG_ENV_ADDR_REDUND,
-			CFG_ENV_ADDR_REDUND + CFG_ENV_SIZE_REDUND - 1,
+			CONFIG_ENV_ADDR_REDUND,
+			CONFIG_ENV_ADDR_REDUND + CONFIG_ENV_SIZE_REDUND - 1,
 			&flash_info[0]);
 #endif
 
@@ -257,7 +257,7 @@ int flash_erase (flash_info_t * info, int s_first, int s_last)
 				result = *addr;
 
 				/* check timeout */
-				if (get_timer_masked () > CFG_FLASH_ERASE_TOUT) {
+				if (get_timer_masked () > CONFIG_SYS_FLASH_ERASE_TOUT) {
 					MEM_FLASH_ADDR1 = CMD_READ_ARRAY;
 					chip1 = TMO;
 					break;
@@ -356,7 +356,7 @@ static int write_word (flash_info_t * info, ulong dest, ulong data)
 		result = *addr;
 
 		/* check timeout */
-		if (get_timer_masked () > CFG_FLASH_WRITE_TOUT) {
+		if (get_timer_masked () > CONFIG_SYS_FLASH_WRITE_TOUT) {
 			chip1 = ERR | TMO;
 			break;
 		}
@@ -559,10 +559,10 @@ static ulong flash_get_size (vu_long *addr, flash_info_t *info)
 
 	}
 
-	if (info->sector_count > CFG_MAX_FLASH_SECT) {
+	if (info->sector_count > CONFIG_SYS_MAX_FLASH_SECT) {
 		printf ("** ERROR: sector count %d > max (%d) **\n",
-			info->sector_count, CFG_MAX_FLASH_SECT);
-		info->sector_count = CFG_MAX_FLASH_SECT;
+			info->sector_count, CONFIG_SYS_MAX_FLASH_SECT);
+		info->sector_count = CONFIG_SYS_MAX_FLASH_SECT;
 	}
 
 	return (info->size);
diff --git a/board/trab/memory.c b/board/trab/memory.c
index 052432e9d..895b68ef7 100644
--- a/board/trab/memory.c
+++ b/board/trab/memory.c
@@ -155,7 +155,7 @@
 #include <post.h>
 #include <watchdog.h>
 
-/* #if CONFIG_POST & CFG_POST_MEMORY */
+/* #if CONFIG_POST & CONFIG_SYS_POST_MEMORY */
 
 /*
  * Define INJECT_*_ERRORS for testing error detection in the presence of
@@ -184,7 +184,7 @@
  *
  * For other processors, let the compiler generate the best code it can.
  */
-static void move64(unsigned long long *src, unsigned long long *dest)
+static void move64(const unsigned long long *src, unsigned long long *dest)
 {
 #if defined(CONFIG_MPC8260) || defined(CONFIG_MPC824X)
 	asm ("lfd  0, 0(3)\n\t" /* fpr0	  =  *scr	*/
@@ -231,12 +231,12 @@ static int memory_post_dataline(unsigned long long * pmem)
 	int ret = 0;
 
 	for ( i = 0; i < num_patterns; i++) {
-		move64((unsigned long long *)&(pattern[i]), pmem++);
+		move64(&(pattern[i]), pmem++);
 		/*
 		 * Put a different pattern on the data lines: otherwise they
 		 * may float long enough to read back what we wrote.
 		 */
-		move64((unsigned long long *)&otherpattern, pmem--);
+		move64(&otherpattern, pmem--);
 		move64(pmem, &temp64);
 
 #ifdef INJECT_DATA_ERRORS
@@ -465,7 +465,7 @@ int memory_post_test (int flags)
 
 
 	if (flags & POST_SLOWTEST) {
-		ret = memory_post_tests (CFG_SDRAM_BASE, memsize);
+		ret = memory_post_tests (CONFIG_SYS_SDRAM_BASE, memsize);
 	} else {			/* POST_NORMAL */
 
 		unsigned long i;
@@ -482,5 +482,5 @@ int memory_post_test (int flags)
 }
 #endif /* 0 */
 
-/* #endif */ /* CONFIG_POST & CFG_POST_MEMORY */
+/* #endif */ /* CONFIG_POST & CONFIG_SYS_POST_MEMORY */
 /* #endif */ /* CONFIG_POST */
diff --git a/board/trab/trab.c b/board/trab/trab.c
index b869023ea..57ff71878 100644
--- a/board/trab/trab.c
+++ b/board/trab/trab.c
@@ -30,7 +30,7 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
-#ifdef CFG_BRIGHTNESS
+#ifdef CONFIG_SYS_BRIGHTNESS
 static void spi_init(void);
 static void wait_transmit_done(void);
 static void tsc2000_write(unsigned int page, unsigned int reg,
@@ -199,7 +199,7 @@ int misc_init_r (void)
 		free (str);
 	}
 
-#ifdef CFG_BRIGHTNESS
+#ifdef CONFIG_SYS_BRIGHTNESS
 	tsc2000_set_brightness();
 #endif
 	return (0);
@@ -333,7 +333,7 @@ static int key_pressed(void)
 }
 #endif	/* CONFIG_MODEM_SUPPORT */
 
-#ifdef CFG_BRIGHTNESS
+#ifdef CONFIG_SYS_BRIGHTNESS
 
 static inline void SET_CS_TOUCH(void)
 {
@@ -415,7 +415,7 @@ static void tsc2000_set_brightness(void)
 	i = getenv_r("brightness", tmp, sizeof(tmp));
 	br = (i > 0)
 		? (int) simple_strtoul (tmp, NULL, 10)
-		: CFG_BRIGHTNESS;
+		: CONFIG_SYS_BRIGHTNESS;
 
 	tsc2000_write(0, 0xb, br & 0xff);
 }
diff --git a/board/trab/trab_fkt.c b/board/trab/trab_fkt.c
index 7273ef97b..53cdb5a31 100644
--- a/board/trab/trab_fkt.c
+++ b/board/trab/trab_fkt.c
@@ -25,6 +25,7 @@
 
 #include <common.h>
 #include <exports.h>
+#include <timestamp.h>
 #include <s3c2400.h>
 #include "tsc2000.h"
 #include "rs485.h"
@@ -293,10 +294,16 @@ int trab_fkt (int argc, char *argv[])
 	return 1;
 }
 
+void hang (void)
+{
+	puts ("### ERROR ### Please RESET the board ###\n");
+	for (;;);
+}
+
 int do_info (void)
 {
 	printf ("Stand-alone application for TRAB board function test\n");
-	printf ("Built: %s at %s\n", __DATE__ , __TIME__ );
+	printf ("Built: %s at %s\n", U_BOOT_DATE, U_BOOT_TIME);
 
 	return 0;
 }
diff --git a/board/trab/tsc2000.c b/board/trab/tsc2000.c
index 382a85b35..f13a5a9dc 100644
--- a/board/trab/tsc2000.c
+++ b/board/trab/tsc2000.c
@@ -27,6 +27,7 @@
 
 #include <common.h>
 #include <s3c2400.h>
+#include <div64.h>
 #include "tsc2000.h"
 
 #include "Pt1000_temp_data.h"
@@ -332,6 +333,7 @@ void tsc2000_reg_init (void)
 int tsc2000_interpolate(long value, long data[][2], long *result)
 {
 	int i;
+	unsigned long long val;
 
 	/* the data is sorted and the first element is upper
 	 * limit so we can easily check for out-of-band values
@@ -347,10 +349,10 @@ int tsc2000_interpolate(long value, long data[][2], long *result)
 	   result in 'long long'.
 	*/
 
-	*result = data[i-1][1] +
-		((unsigned long long)(data[i][1] - data[i-1][1])
-		 * (unsigned long long)(value - data[i-1][0]))
-		/ (data[i][0] - data[i-1][0]);
+	val = ((unsigned long long)(data[i][1] - data[i-1][1])
+		   * (unsigned long long)(value - data[i-1][0]));
+	do_div(val, (data[i][0] - data[i-1][0]));
+	*result = data[i-1][1] + val;
 
 	return 0;
 }
diff --git a/board/trab/u-boot.lds b/board/trab/u-boot.lds
index 043e01c9b..bd13d13a1 100644
--- a/board/trab/u-boot.lds
+++ b/board/trab/u-boot.lds
@@ -39,7 +39,7 @@ SECTIONS
 	  lib_generic/string.o	(.text)
 
 	. = DEFINED(env_offset) ? env_offset : .;
-	  common/environment.o	(.ppcenv)
+	  common/env_embedded.o	(.ppcenv)
 
 	  *(.text)
 	}
@@ -60,6 +60,6 @@ SECTIONS
 
 	. = ALIGN(4);
 	__bss_start = .;
-	.bss (NOLOAD) : { *(.bss) }
+	.bss (NOLOAD) : { *(.bss) . = ALIGN(4); }
 	_end = .;
 }
diff --git a/board/trizepsiv/lowlevel_init.S b/board/trizepsiv/lowlevel_init.S
index d8869381a..128d55407 100644
--- a/board/trizepsiv/lowlevel_init.S
+++ b/board/trizepsiv/lowlevel_init.S
@@ -49,119 +49,119 @@ lowlevel_init:
 	/* Set up GPIO pins first ----------------------------------------- */
 
 	ldr		r0,	=GPSR0
-	ldr		r1,	=CFG_GPSR0_VAL
+	ldr		r1,	=CONFIG_SYS_GPSR0_VAL
 	str		r1,   [r0]
 
 	ldr		r0,	=GPSR1
-	ldr		r1,	=CFG_GPSR1_VAL
+	ldr		r1,	=CONFIG_SYS_GPSR1_VAL
 	str		r1,   [r0]
 
 	ldr		r0,	=GPSR2
-	ldr		r1,	=CFG_GPSR2_VAL
+	ldr		r1,	=CONFIG_SYS_GPSR2_VAL
 	str		r1,   [r0]
 
 	ldr		r0,	=GPSR3
-	ldr		r1,	=CFG_GPSR3_VAL
+	ldr		r1,	=CONFIG_SYS_GPSR3_VAL
 	str		r1,   [r0]
 
 	ldr		r0,	=GPCR0
-	ldr		r1,	=CFG_GPCR0_VAL
+	ldr		r1,	=CONFIG_SYS_GPCR0_VAL
 	str		r1,   [r0]
 
 	ldr		r0,	=GPCR1
-	ldr		r1,	=CFG_GPCR1_VAL
+	ldr		r1,	=CONFIG_SYS_GPCR1_VAL
 	str		r1,   [r0]
 
 	ldr		r0,	=GPCR2
-	ldr		r1,	=CFG_GPCR2_VAL
+	ldr		r1,	=CONFIG_SYS_GPCR2_VAL
 	str		r1,   [r0]
 
 	ldr		r0,	=GPCR3
-	ldr		r1,	=CFG_GPCR3_VAL
+	ldr		r1,	=CONFIG_SYS_GPCR3_VAL
 	str		r1,   [r0]
 
 	ldr		r0,	=GRER0
-	ldr		r1,	=CFG_GRER0_VAL
+	ldr		r1,	=CONFIG_SYS_GRER0_VAL
 	str		r1,   [r0]
 
 	ldr		r0,	=GRER1
-	ldr		r1,	=CFG_GRER1_VAL
+	ldr		r1,	=CONFIG_SYS_GRER1_VAL
 	str		r1,   [r0]
 
 	ldr		r0,	=GRER2
-	ldr		r1,	=CFG_GRER2_VAL
+	ldr		r1,	=CONFIG_SYS_GRER2_VAL
 	str		r1,   [r0]
 
 	ldr		r0,	=GRER3
-	ldr		r1,	=CFG_GRER3_VAL
+	ldr		r1,	=CONFIG_SYS_GRER3_VAL
 	str		r1,   [r0]
 
 	ldr		r0,	=GFER0
-	ldr		r1,	=CFG_GFER0_VAL
+	ldr		r1,	=CONFIG_SYS_GFER0_VAL
 	str		r1,   [r0]
 
 	ldr		r0,	=GFER1
-	ldr		r1,	=CFG_GFER1_VAL
+	ldr		r1,	=CONFIG_SYS_GFER1_VAL
 	str		r1,   [r0]
 
 	ldr		r0,	=GFER2
-	ldr		r1,	=CFG_GFER2_VAL
+	ldr		r1,	=CONFIG_SYS_GFER2_VAL
 	str		r1,   [r0]
 
 	ldr		r0,	=GFER3
-	ldr		r1,	=CFG_GFER3_VAL
+	ldr		r1,	=CONFIG_SYS_GFER3_VAL
 	str		r1,   [r0]
 
 	ldr		r0,	=GPDR0
-	ldr		r1,	=CFG_GPDR0_VAL
+	ldr		r1,	=CONFIG_SYS_GPDR0_VAL
 	str		r1,   [r0]
 
 	ldr		r0,	=GPDR1
-	ldr		r1,	=CFG_GPDR1_VAL
+	ldr		r1,	=CONFIG_SYS_GPDR1_VAL
 	str		r1,   [r0]
 
 	ldr		r0,	=GPDR2
-	ldr		r1,	=CFG_GPDR2_VAL
+	ldr		r1,	=CONFIG_SYS_GPDR2_VAL
 	str		r1,   [r0]
 
 	ldr		r0,	=GPDR3
-	ldr		r1,	=CFG_GPDR3_VAL
+	ldr		r1,	=CONFIG_SYS_GPDR3_VAL
 	str		r1,   [r0]
 
 	ldr		r0,	=GAFR0_L
-	ldr		r1,	=CFG_GAFR0_L_VAL
+	ldr		r1,	=CONFIG_SYS_GAFR0_L_VAL
 	str		r1,   [r0]
 
 	ldr		r0,	=GAFR0_U
-	ldr		r1,	=CFG_GAFR0_U_VAL
+	ldr		r1,	=CONFIG_SYS_GAFR0_U_VAL
 	str		r1,   [r0]
 
 	ldr		r0,	=GAFR1_L
-	ldr		r1,	=CFG_GAFR1_L_VAL
+	ldr		r1,	=CONFIG_SYS_GAFR1_L_VAL
 	str		r1,   [r0]
 
 	ldr		r0,	=GAFR1_U
-	ldr		r1,	=CFG_GAFR1_U_VAL
+	ldr		r1,	=CONFIG_SYS_GAFR1_U_VAL
 	str		r1,   [r0]
 
 	ldr		r0,	=GAFR2_L
-	ldr		r1,	=CFG_GAFR2_L_VAL
+	ldr		r1,	=CONFIG_SYS_GAFR2_L_VAL
 	str		r1,   [r0]
 
 	ldr		r0,	=GAFR2_U
-	ldr		r1,	=CFG_GAFR2_U_VAL
+	ldr		r1,	=CONFIG_SYS_GAFR2_U_VAL
 	str		r1,   [r0]
 
 	ldr		r0,	=GAFR3_L
-	ldr		r1,	=CFG_GAFR3_L_VAL
+	ldr		r1,	=CONFIG_SYS_GAFR3_L_VAL
 	str		r1,   [r0]
 
 	ldr		r0,	=GAFR3_U
-	ldr		r1,	=CFG_GAFR3_U_VAL
+	ldr		r1,	=CONFIG_SYS_GAFR3_U_VAL
 	str		r1,   [r0]
 
 	ldr		r0,	=PSSR		/* enable GPIO pins */
-	ldr		r1,	=CFG_PSSR_VAL
+	ldr		r1,	=CONFIG_SYS_PSSR_VAL
 	str		r1,   [r0]
 
 	/* ---------------------------------------------------------------- */
@@ -199,17 +199,17 @@ mem_init:
 	/* MSC registers: timing, bus width, mem type			    */
 
 	/* MSC0: nCS(0,1)						    */
-	ldr	r2,   =CFG_MSC0_VAL
+	ldr	r2,   =CONFIG_SYS_MSC0_VAL
 	str	r2,   [r1, #MSC0_OFFSET]
 	ldr	r2,   [r1, #MSC0_OFFSET]	/* read back to ensure	    */
 						/* that data latches	    */
 	/* MSC1: nCS(2,3)						    */
-	ldr	r2,  =CFG_MSC1_VAL
+	ldr	r2,  =CONFIG_SYS_MSC1_VAL
 	str	r2,  [r1, #MSC1_OFFSET]
 	ldr	r2,  [r1, #MSC1_OFFSET]
 
 	/* MSC2: nCS(4,5)						    */
-	ldr	r2,  =CFG_MSC2_VAL
+	ldr	r2,  =CONFIG_SYS_MSC2_VAL
 	str	r2,  [r1, #MSC2_OFFSET]
 	ldr	r2,  [r1, #MSC2_OFFSET]
 
@@ -218,44 +218,44 @@ mem_init:
 	/* ---------------------------------------------------------------- */
 
 	/* MECR: Memory Expansion Card Register				    */
-	ldr	r2,  =CFG_MECR_VAL
+	ldr	r2,  =CONFIG_SYS_MECR_VAL
 	str	r2,  [r1, #MECR_OFFSET]
 	ldr	r2,	[r1, #MECR_OFFSET]
 
 	/* MCMEM0: Card Interface slot 0 timing				    */
-	ldr	r2,  =CFG_MCMEM0_VAL
+	ldr	r2,  =CONFIG_SYS_MCMEM0_VAL
 	str	r2,  [r1, #MCMEM0_OFFSET]
 	ldr	r2,	[r1, #MCMEM0_OFFSET]
 
 	/* MCMEM1: Card Interface slot 1 timing				    */
-	ldr	r2,  =CFG_MCMEM1_VAL
+	ldr	r2,  =CONFIG_SYS_MCMEM1_VAL
 	str	r2,  [r1, #MCMEM1_OFFSET]
 	ldr	r2,	[r1, #MCMEM1_OFFSET]
 
 	/* MCATT0: Card Interface Attribute Space Timing, slot 0	    */
-	ldr	r2,  =CFG_MCATT0_VAL
+	ldr	r2,  =CONFIG_SYS_MCATT0_VAL
 	str	r2,  [r1, #MCATT0_OFFSET]
 	ldr	r2,	[r1, #MCATT0_OFFSET]
 
 	/* MCATT1: Card Interface Attribute Space Timing, slot 1	    */
-	ldr	r2,  =CFG_MCATT1_VAL
+	ldr	r2,  =CONFIG_SYS_MCATT1_VAL
 	str	r2,  [r1, #MCATT1_OFFSET]
 	ldr	r2,	[r1, #MCATT1_OFFSET]
 
 	/* MCIO0: Card Interface I/O Space Timing, slot 0		    */
-	ldr	r2,  =CFG_MCIO0_VAL
+	ldr	r2,  =CONFIG_SYS_MCIO0_VAL
 	str	r2,  [r1, #MCIO0_OFFSET]
 	ldr	r2,	[r1, #MCIO0_OFFSET]
 
 	/* MCIO1: Card Interface I/O Space Timing, slot 1		    */
-	ldr	r2,  =CFG_MCIO1_VAL
+	ldr	r2,  =CONFIG_SYS_MCIO1_VAL
 	str	r2,  [r1, #MCIO1_OFFSET]
 	ldr	r2,	[r1, #MCIO1_OFFSET]
 
 	/* ---------------------------------------------------------------- */
 	/* Step 2c: Write FLYCNFG  FIXME: what's that???		    */
 	/* ---------------------------------------------------------------- */
-	ldr	r2,  =CFG_FLYCNFG_VAL
+	ldr	r2,  =CONFIG_SYS_FLYCNFG_VAL
 	str	r2,  [r1, #FLYCNFG_OFFSET]
 	str	r2,	[r1, #FLYCNFG_OFFSET]
 
@@ -270,7 +270,7 @@ mem_init:
 	ldr	r2,	=0xFFF
 	bic	r4,	r4, r2
 
-	ldr	r3,	=CFG_MDREFR_VAL
+	ldr	r3,	=CONFIG_SYS_MDREFR_VAL
 	and	r3,	r3,  r2
 
 	orr	r4,	r4, r3
@@ -300,7 +300,7 @@ mem_init:
 	/* synchronous static memory. Note that SXLCR need not be written   */
 	/* at this time.						    */
 
-	ldr	r2,  =CFG_SXCNFG_VAL
+	ldr	r2,  =CONFIG_SYS_SXCNFG_VAL
 	str	r2,  [r1, #SXCNFG_OFFSET]
 
 	/* ---------------------------------------------------------------- */
@@ -329,7 +329,7 @@ mem_init:
 	/* Step 4d: write MDCNFG with MDCNFG:DEx deasserted (set to 0), to  */
 	/*	    configure but not enable each SDRAM partition pair.	    */
 
-	ldr	r4,	=CFG_MDCNFG_VAL
+	ldr	r4,	=CONFIG_SYS_MDCNFG_VAL
 	bic	r4,	r4,	#(MDCNFG_DE0|MDCNFG_DE1)
 	bic	r4,	r4,	#(MDCNFG_DE2|MDCNFG_DE3)
 
@@ -357,7 +357,7 @@ mem_init:
 	/*	    documented in SDRAM data sheets. The address(es) used   */
 	/*	    for this purpose must not be cacheable.		    */
 
-	ldr	r3,	=CFG_DRAM_BASE
+	ldr	r3,	=CONFIG_SYS_DRAM_BASE
 	str	r2,	[r3]
 	str	r2,	[r3]
 	str	r2,	[r3]
@@ -379,7 +379,7 @@ mem_init:
 
 	/* Step 4h: Write MDMRS.					    */
 
-	ldr	r2,  =CFG_MDMRS_VAL
+	ldr	r2,  =CONFIG_SYS_MDMRS_VAL
 	str	r2,  [r1, #MDMRS_OFFSET]
 
 	/* enable APD */
@@ -443,11 +443,11 @@ initclks:
 	/* Turn Off on-chip peripheral clocks (except for memory)	    */
 	/* for re-configuration.					    */
 	ldr	r1,  =CKEN
-	ldr	r2,  =CFG_CKEN
+	ldr	r2,  =CONFIG_SYS_CKEN
 	str	r2,  [r1]
 
 	/* ... and write the core clock config register			    */
-	ldr	r2,  =CFG_CCCR
+	ldr	r2,  =CONFIG_SYS_CCCR
 	ldr	r1,  =CCCR
 	str	r2,  [r1]
 
diff --git a/board/trizepsiv/u-boot.lds b/board/trizepsiv/u-boot.lds
index 14d264a68..7cf9fdf63 100644
--- a/board/trizepsiv/u-boot.lds
+++ b/board/trizepsiv/u-boot.lds
@@ -51,6 +51,6 @@ SECTIONS
 
 	. = ALIGN(4);
 	__bss_start = .;
-	.bss (NOLOAD) : { *(.bss) }
+	.bss (NOLOAD) : { *(.bss) . = ALIGN(4); }
 	_end = .;
 }
diff --git a/board/uc100/pcmcia.c b/board/uc100/pcmcia.c
index 407bdb73c..ad256783c 100644
--- a/board/uc100/pcmcia.c
+++ b/board/uc100/pcmcia.c
@@ -24,7 +24,7 @@ static void cfg_ports (void)
 {
 	volatile immap_t	*immap;
 
-	immap = (immap_t *)CFG_IMMR;
+	immap = (immap_t *)CONFIG_SYS_IMMR;
 
 	/*
 	* Configure Port A for MAX1602 PC-Card Power-Interface Switch
@@ -49,10 +49,10 @@ int pcmcia_hardware_enable(int slot)
 
 	udelay(10000);
 
-	immap = (immap_t *)CFG_IMMR;
-	sysp  = (sysconf8xx_t *)(&(((immap_t *)CFG_IMMR)->im_siu_conf));
-	pcmp  = (pcmconf8xx_t *)(&(((immap_t *)CFG_IMMR)->im_pcmcia));
-	cp    = (cpm8xx_t *)(&(((immap_t *)CFG_IMMR)->im_cpm));
+	immap = (immap_t *)CONFIG_SYS_IMMR;
+	sysp  = (sysconf8xx_t *)(&(((immap_t *)CONFIG_SYS_IMMR)->im_siu_conf));
+	pcmp  = (pcmconf8xx_t *)(&(((immap_t *)CONFIG_SYS_IMMR)->im_pcmcia));
+	cp    = (cpm8xx_t *)(&(((immap_t *)CONFIG_SYS_IMMR)->im_cpm));
 
 	/* Configure Ports for TPS2211A PC-Card Power-Interface Switch */
 	cfg_ports ();
@@ -133,8 +133,8 @@ int pcmcia_hardware_disable(int slot)
 
 	debug ("hardware_disable: " PCMCIA_BOARD_MSG " Slot %c\n", 'A'+slot);
 
-	immap = (immap_t *)CFG_IMMR;
-	pcmp  = (pcmconf8xx_t *)(&(((immap_t *)CFG_IMMR)->im_pcmcia));
+	immap = (immap_t *)CONFIG_SYS_IMMR;
+	pcmp  = (pcmconf8xx_t *)(&(((immap_t *)CONFIG_SYS_IMMR)->im_pcmcia));
 
 	/* switch VCC off */
 	immap->im_ioport.iop_padat &= ~0x8000; /* power disable 3.3V */
@@ -163,8 +163,8 @@ int pcmcia_voltage_set(int slot, int vcc, int vpp)
 			" Slot %c, Vcc=%d.%d, Vpp=%d.%d\n",
 	'A'+slot, vcc/10, vcc%10, vpp/10, vcc%10);
 
-	immap = (immap_t *)CFG_IMMR;
-	pcmp  = (pcmconf8xx_t *)(&(((immap_t *)CFG_IMMR)->im_pcmcia));
+	immap = (immap_t *)CONFIG_SYS_IMMR;
+	pcmp  = (pcmconf8xx_t *)(&(((immap_t *)CONFIG_SYS_IMMR)->im_pcmcia));
 	/*
 	* Disable PCMCIA buffers (isolate the interface)
 	* and assert RESET signal
diff --git a/board/uc100/u-boot.lds b/board/uc100/u-boot.lds
index db2934249..66a57e6fb 100644
--- a/board/uc100/u-boot.lds
+++ b/board/uc100/u-boot.lds
@@ -65,7 +65,7 @@ SECTIONS
     lib_ppc/cache.o		(.text)
     lib_ppc/time.o		(.text)
 
-    common/environment.o	(.text)
+    common/env_embedded.o	(.text)
 
     *(.text)
     *(.fixup)
@@ -136,6 +136,7 @@ SECTIONS
    *(.dynbss)
    *(.bss)
    *(COMMON)
+   . = ALIGN(4);
   }
   _end = . ;
   PROVIDE (end = .);
diff --git a/board/uc100/u-boot.lds.debug b/board/uc100/u-boot.lds.debug
index 25702a543..575065711 100644
--- a/board/uc100/u-boot.lds.debug
+++ b/board/uc100/u-boot.lds.debug
@@ -60,7 +60,7 @@ SECTIONS
     lib_generic/vsprintf.o	(.text)
     lib_generic/crc32.o		(.text)
 
-    common/environment.o(.text)
+    common/env_embedded.o(.text)
 
     *(.text)
     *(.fixup)
diff --git a/board/uc100/uc100.c b/board/uc100/uc100.c
index 896f9693e..38c7be6ba 100644
--- a/board/uc100/uc100.c
+++ b/board/uc100/uc100.c
@@ -138,7 +138,7 @@ int board_switch(void)
 {
 	volatile pcmconf8xx_t	*pcmp;
 
-	pcmp  = (pcmconf8xx_t *)(&(((immap_t *)CFG_IMMR)->im_pcmcia));
+	pcmp  = (pcmconf8xx_t *)(&(((immap_t *)CONFIG_SYS_IMMR)->im_pcmcia));
 
 	return ((pcmp->pcmc_pipr >> 24) & 0xf);
 }
@@ -171,7 +171,7 @@ int checkboard (void)
  */
 phys_size_t initdram (int board_type)
 {
-	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
 	volatile memctl8xx_t *memctl = &immap->im_memctl;
 
 	/*---------------------------------------------------------------------*/
@@ -187,8 +187,8 @@ phys_size_t initdram (int board_type)
 	/*---------------------------------------------------------------------*/
 	memctl->memc_mptpr = 0x0200; /* Divide by 32 WV */
 
-	memctl->memc_mamr = CFG_MAMR_VAL & 0xFF7FFFFF; /* Bit 8 := "0" Kein Refresh WV */
-	memctl->memc_mbmr = CFG_MBMR_VAL;
+	memctl->memc_mamr = CONFIG_SYS_MAMR_VAL & 0xFF7FFFFF; /* Bit 8 := "0" Kein Refresh WV */
+	memctl->memc_mbmr = CONFIG_SYS_MBMR_VAL;
 
 	/*---------------------------------------------------------------------*/
 	/* Initialize the Memory Controller registers, MPTPR, Chip Select 1    */
@@ -198,8 +198,8 @@ phys_size_t initdram (int board_type)
 	/*       clock rate (16.67MHz) to allow proper operation for all ADS   */
 	/*       clock frequencies.                                            */
 	/*---------------------------------------------------------------------*/
-	memctl->memc_or1 = CFG_OR1_PRELIM;
-	memctl->memc_br1 = CFG_BR1_PRELIM;
+	memctl->memc_or1 = CONFIG_SYS_OR1_PRELIM;
+	memctl->memc_br1 = CONFIG_SYS_BR1_PRELIM;
 
 	/*-------------------------------------------------------------------*/
 	/* Wait at least 200 usec for DRAM to stabilize, this magic number   */
@@ -209,8 +209,8 @@ phys_size_t initdram (int board_type)
 
 	memctl->memc_mamr = (memctl->memc_mamr | 0x04) & ~0x08;
 
-	memctl->memc_br1 = CFG_BR1_PRELIM;
-	memctl->memc_or1 = CFG_OR1_PRELIM;
+	memctl->memc_br1 = CONFIG_SYS_BR1_PRELIM;
+	memctl->memc_or1 = CONFIG_SYS_OR1_PRELIM;
 
 	/*---------------------------------------------------------------------*/
 	/* run MRS command in location 5-8 of UPMB.                            */
@@ -236,7 +236,7 @@ phys_size_t initdram (int board_type)
 	/*---------------------------------------------------------------------*/
 	/* rerstore MBMR value (4-beat refresh burst.)                         */
 	/*---------------------------------------------------------------------*/
-	memctl->memc_mamr = CFG_MAMR_VAL | 0x00800000; /* Bit 8 := "1" Refresh Enable WV */
+	memctl->memc_mamr = CONFIG_SYS_MAMR_VAL | 0x00800000; /* Bit 8 := "1" Refresh Enable WV */
 
 	udelay(200);
 
@@ -251,9 +251,9 @@ int misc_init_r (void)
 	/*
 	 * Make sure that RTC has clock output enabled (triggers watchdog!)
 	 */
-	val = i2c_reg_read (CFG_I2C_RTC_ADDR, 0x0D);
+	val = i2c_reg_read (CONFIG_SYS_I2C_RTC_ADDR, 0x0D);
 	val |= 0x80;
-	i2c_reg_write (CFG_I2C_RTC_ADDR, 0x0D, val);
+	i2c_reg_write (CONFIG_SYS_I2C_RTC_ADDR, 0x0D, val);
 
 	/*
 	 * Configure PHY to setup LED's correctly and use 100MBit, FD
diff --git a/board/uc101/uc101.c b/board/uc101/uc101.c
index 69ba5078d..7df349f3e 100644
--- a/board/uc101/uc101.c
+++ b/board/uc101/uc101.c
@@ -99,7 +99,7 @@
 #define GP_TIMER_GET_I(n, v) ( \
 	(((volatile struct mpc5xxx_gpt *)(MPC5XXX_GPT + n))->sr & 0x100) >> 8)
 
-#ifndef CFG_RAMBOOT
+#ifndef CONFIG_SYS_RAMBOOT
 static void sdram_start (int hi_addr)
 {
 	long hi_addr_bit = hi_addr ? 0x01000000 : 0;
@@ -142,14 +142,14 @@ static void sdram_start (int hi_addr)
 
 /*
  * ATTENTION: Although partially referenced initdram does NOT make real use
- *	      use of CFG_SDRAM_BASE. The code does not work if CFG_SDRAM_BASE
+ *	      use of CONFIG_SYS_SDRAM_BASE. The code does not work if CONFIG_SYS_SDRAM_BASE
  *	      is something else than 0x00000000.
  */
 
 phys_size_t initdram (int board_type)
 {
 	ulong dramsize = 0;
-#ifndef CFG_RAMBOOT
+#ifndef CONFIG_SYS_RAMBOOT
 	ulong test1, test2;
 
 	/* setup SDRAM chip selects */
@@ -170,9 +170,9 @@ phys_size_t initdram (int board_type)
 
 	/* find RAM size using SDRAM CS0 only */
 	sdram_start(0);
-	test1 = get_ram_size((long *)CFG_SDRAM_BASE, 0x20000000);
+	test1 = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE, 0x20000000);
 	sdram_start(1);
-	test2 = get_ram_size((long *)CFG_SDRAM_BASE, 0x20000000);
+	test2 = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE, 0x20000000);
 	if (test1 > test2) {
 		sdram_start(0);
 		dramsize = test1;
@@ -194,7 +194,7 @@ phys_size_t initdram (int board_type)
 	}
 
 	*(vu_long *)MPC5XXX_SDRAM_CS1CFG = dramsize; /* disabled */
-#else /* CFG_RAMBOOT */
+#else /* CONFIG_SYS_RAMBOOT */
 
 	/* retrieve size of memory connected to SDRAM CS0 */
 	dramsize = *(vu_long *)MPC5XXX_SDRAM_CS0CFG & 0xFF;
@@ -212,7 +212,7 @@ phys_size_t initdram (int board_type)
 		dramsize2 = 0;
 	}
 
-#endif /* CFG_RAMBOOT */
+#endif /* CONFIG_SYS_RAMBOOT */
 
 /*	return dramsize + dramsize2; */
 	return dramsize;
@@ -222,7 +222,7 @@ int checkboard (void)
 {
 	puts ("Board: MAN UC101\n");
 	/* clear the Display */
-	*(char *)(CFG_DISP_CWORD) = 0x80;
+	*(char *)(CONFIG_SYS_DISP_CWORD) = 0x80;
 	return 0;
 }
 
@@ -345,9 +345,9 @@ int board_early_init_r (void)
 {
 	*(vu_long *)MPC5XXX_BOOTCS_CFG &= ~0x1; /* clear RO */
 	*(vu_long *)MPC5XXX_BOOTCS_START =
-	*(vu_long *)MPC5XXX_CS0_START = START_REG(CFG_FLASH_BASE);
+	*(vu_long *)MPC5XXX_CS0_START = START_REG(CONFIG_SYS_FLASH_BASE);
 	*(vu_long *)MPC5XXX_BOOTCS_STOP =
-	*(vu_long *)MPC5XXX_CS0_STOP = STOP_REG(CFG_FLASH_BASE, CFG_FLASH_SIZE);
+	*(vu_long *)MPC5XXX_CS0_STOP = STOP_REG(CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_SIZE);
 	/* Interbus enable it here ?? */
 	*(vu_long *)MPC5XXX_GPT6_ENABLE = GPT_OUT_1;
 	return 0;
diff --git a/board/utx8245/flash.c b/board/utx8245/flash.c
index 199f619a8..aac81167d 100644
--- a/board/utx8245/flash.c
+++ b/board/utx8245/flash.c
@@ -33,15 +33,15 @@
 #define ROM_CS0_START	0xFF800000
 #define ROM_CS1_START	0xFF000000
 
-#if defined(CFG_ENV_IS_IN_FLASH)
-# ifndef  CFG_ENV_ADDR
-#  define CFG_ENV_ADDR	(CFG_FLASH_BASE + CFG_ENV_OFFSET)
+#if defined(CONFIG_ENV_IS_IN_FLASH)
+# ifndef  CONFIG_ENV_ADDR
+#  define CONFIG_ENV_ADDR	(CONFIG_SYS_FLASH_BASE + CONFIG_ENV_OFFSET)
 # endif
-# ifndef  CFG_ENV_SIZE
-#  define CFG_ENV_SIZE	CFG_ENV_SECT_SIZE
+# ifndef  CONFIG_ENV_SIZE
+#  define CONFIG_ENV_SIZE	CONFIG_ENV_SECT_SIZE
 # endif
-# ifndef  CFG_ENV_SECT_SIZE
-#  define CFG_ENV_SECT_SIZE  CFG_ENV_SIZE
+# ifndef  CONFIG_ENV_SECT_SIZE
+#  define CONFIG_ENV_SECT_SIZE  CONFIG_ENV_SIZE
 # endif
 #endif
 
@@ -50,7 +50,7 @@
 #define	SECT_SIZE_32KB	0x8000
 #define	SECT_SIZE_8KB	0x2000
 
-flash_info_t flash_info[CFG_MAX_FLASH_BANKS];
+flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];
 
 static int write_word (flash_info_t * info, ulong dest, ulong data);
 #if 0
@@ -80,8 +80,8 @@ unsigned long flash_init (void)
 	ulong total_size = 0, device_size = 1;
 	unsigned char manuf_id, device_id;
 
-	for (i = 0; i < CFG_MAX_FLASH_BANKS; i++) {
-		vu_char *addr = (vu_char *) (CFG_FLASH_BASE + i * FLASH_BANK_SIZE);
+	for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) {
+		vu_char *addr = (vu_char *) (CONFIG_SYS_FLASH_BASE + i * FLASH_BANK_SIZE);
 
 		addr[0x555] = 0xAA;		/* get manuf/device info command */
 		addr[0x2AA] = 0x55;		/* 3-cycle command */
@@ -97,7 +97,7 @@ unsigned long flash_init (void)
 			device_size *= 2;
 
 		flash_info[i].size = device_size;
-		flash_info[i].sector_count = CFG_MAX_FLASH_SECT;
+		flash_info[i].sector_count = CONFIG_SYS_MAX_FLASH_SECT;
 
 #if defined DEBUG_FLASH
 		printf ("manuf_id = %x, device_id = %x\n", manuf_id, device_id);
@@ -112,7 +112,7 @@ unsigned long flash_init (void)
 			/* set individual sector start addresses */
 			for (j = 0; j < flash_info[i].sector_count; j++) {
 				flash_info[i].start[j] =
-						(CFG_FLASH_BASE + i * FLASH_BANK_SIZE +
+						(CONFIG_SYS_FLASH_BASE + i * FLASH_BANK_SIZE +
 						 j * MAIN_SECT_SIZE);
 			}
 		}
@@ -126,14 +126,14 @@ unsigned long flash_init (void)
 			/* set individual sector start addresses */
 			for (j = 0; j < flash_info[i].sector_count; j++) {
 				flash_info[i].start[j] =
-						(CFG_FLASH_BASE + i * FLASH_BANK_SIZE +
+						(CONFIG_SYS_FLASH_BASE + i * FLASH_BANK_SIZE +
 						 j * MAIN_SECT_SIZE);
 
-				if (j < (CFG_MAX_FLASH_SECT - 3)) {
+				if (j < (CONFIG_SYS_MAX_FLASH_SECT - 3)) {
 					flash_info[i].start[j] =
-							(CFG_FLASH_BASE + i * FLASH_BANK_SIZE +
+							(CONFIG_SYS_FLASH_BASE + i * FLASH_BANK_SIZE +
 							 j * MAIN_SECT_SIZE);
-				} else if (j == (CFG_MAX_FLASH_SECT - 3)) {
+				} else if (j == (CONFIG_SYS_MAX_FLASH_SECT - 3)) {
 					flash_info[i].start[j] =
 							(flash_info[i].start[j - 1] + SECT_SIZE_32KB);
 
@@ -156,22 +156,22 @@ unsigned long flash_init (void)
 
 		addr[0] = 0xFF;
 
-		memset (flash_info[i].protect, 0, CFG_MAX_FLASH_SECT);
+		memset (flash_info[i].protect, 0, CONFIG_SYS_MAX_FLASH_SECT);
 
 		total_size += flash_info[i].size;
 	}
 
 	/* Protect monitor and environment sectors
 	 */
-#if CFG_MONITOR_BASE >= CFG_FLASH_BASE
-	flash_protect (FLAG_PROTECT_SET, CFG_MONITOR_BASE,
-				   CFG_MONITOR_BASE + monitor_flash_len - 1,
+#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE
+	flash_protect (FLAG_PROTECT_SET, CONFIG_SYS_MONITOR_BASE,
+				   CONFIG_SYS_MONITOR_BASE + monitor_flash_len - 1,
 				   &flash_info[0]);
 #endif
 
-#if (CFG_ENV_IS_IN_FLASH == 1) && defined(CFG_ENV_ADDR)
-	flash_protect (FLAG_PROTECT_SET, CFG_ENV_ADDR,
-			CFG_ENV_ADDR + CFG_ENV_SIZE - 1, &flash_info[0]);
+#if defined(CONFIG_ENV_IS_IN_FLASH) && defined(CONFIG_ENV_ADDR)
+	flash_protect (FLAG_PROTECT_SET, CONFIG_ENV_ADDR,
+			CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1, &flash_info[0]);
 #endif
 
   Done:
@@ -383,7 +383,7 @@ int flash_erase (flash_info_t * info, int s_first, int s_last)
 												   start[0]) << sh8b));
 	while ((addr[0] & (FLASH_WORD_SIZE) 0x00800080) !=
 		   (FLASH_WORD_SIZE) 0x00800080) {
-		if ((now = get_timer (start)) > CFG_FLASH_ERASE_TOUT) {
+		if ((now = get_timer (start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
 			printf ("Timeout\n");
 			return 1;
 		}
@@ -524,7 +524,7 @@ static int write_word (flash_info_t * info, ulong dest, ulong data)
 		start = get_timer (0);
 		while ((dest2[i << sh8b] & (FLASH_WORD_SIZE) 0x00800080) !=
 			   (data2[i] & (FLASH_WORD_SIZE) 0x00800080)) {
-			if (get_timer (start) > CFG_FLASH_WRITE_TOUT) {
+			if (get_timer (start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
 				return (1);
 			}
 		}
diff --git a/board/utx8245/utx8245.c b/board/utx8245/utx8245.c
index e2a961a3a..840268915 100644
--- a/board/utx8245/utx8245.c
+++ b/board/utx8245/utx8245.c
@@ -32,6 +32,7 @@
 #include <asm/io.h>
 #include <asm/mmu.h>
 #include <pci.h>
+#include <netdev.h>
 
 #define	SAVE_SZ	32
 
@@ -54,7 +55,7 @@ phys_size_t initdram(int board_type)
 	long mear1;
 	long emear1;
 
-	size = get_ram_size(CFG_SDRAM_BASE, CFG_MAX_RAM_SIZE);
+	size = get_ram_size(CONFIG_SYS_SDRAM_BASE, CONFIG_SYS_MAX_RAM_SIZE);
 
 	new_bank0_end = size/2 - 1;
 	new_bank1_end = size - 1;
@@ -127,3 +128,8 @@ void pci_init_board (void)
 
 	icache_enable();
 }
+
+int board_eth_init(bd_t *bis)
+{
+	return pci_eth_init(bis);
+}
diff --git a/board/v37/flash.c b/board/v37/flash.c
index d845f652f..9b817ec14 100644
--- a/board/v37/flash.c
+++ b/board/v37/flash.c
@@ -38,7 +38,7 @@
 #include <common.h>
 #include <mpc8xx.h>
 
-flash_info_t	flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips	*/
+flash_info_t	flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips	*/
 
 /*-----------------------------------------------------------------------
  * Functions
@@ -54,42 +54,42 @@ static void flash_get_id_long( void *ptr,  short *ptr_manuf, short *ptr_dev_id);
 
 unsigned long flash_init (void)
 {
-	volatile immap_t     *immap  = (immap_t *)CFG_IMMR;
+	volatile immap_t     *immap  = (immap_t *)CONFIG_SYS_IMMR;
 	volatile memctl8xx_t *memctl = &immap->im_memctl;
 	unsigned long size_b0, size_b1;
 	short manu, dev_id;
 	int i;
 
 	/* Init: no FLASHes known */
-	for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) {
+	for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
 		flash_info[i].flash_id = FLASH_UNKNOWN;
 	}
 
 	/* Do sizing to get full correct info */
 
-	flash_get_id_word((void*)CFG_FLASH_BASE0,&manu,&dev_id);
+	flash_get_id_word((void*)CONFIG_SYS_FLASH_BASE0,&manu,&dev_id);
 
 	size_b0 = flash_get_size(manu, dev_id, &flash_info[0]);
 
-	flash_get_offsets (CFG_FLASH_BASE0, &flash_info[0],0);
+	flash_get_offsets (CONFIG_SYS_FLASH_BASE0, &flash_info[0],0);
 
-	memctl->memc_or0 = CFG_OR_TIMING_FLASH | (0 - size_b0);
+	memctl->memc_or0 = CONFIG_SYS_OR_TIMING_FLASH | (0 - size_b0);
 
-#if CFG_MONITOR_BASE >= CFG_FLASH_BASE0
+#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE0
 	/* monitor protection ON by default */
 	flash_protect(FLAG_PROTECT_SET,
-		      CFG_MONITOR_BASE,
-		      CFG_MONITOR_BASE+monitor_flash_len-1,
+		      CONFIG_SYS_MONITOR_BASE,
+		      CONFIG_SYS_MONITOR_BASE+monitor_flash_len-1,
 		      &flash_info[0]);
 #endif
 
-	flash_get_id_long((void*)CFG_FLASH_BASE1,&manu,&dev_id);
+	flash_get_id_long((void*)CONFIG_SYS_FLASH_BASE1,&manu,&dev_id);
 
 	size_b1 = 2 * flash_get_size(manu, dev_id, &flash_info[1]);
 
-	flash_get_offsets(CFG_FLASH_BASE1, &flash_info[1],1);
+	flash_get_offsets(CONFIG_SYS_FLASH_BASE1, &flash_info[1],1);
 
-	memctl->memc_or1 = CFG_OR_TIMING_FLASH | (0 - size_b1);
+	memctl->memc_or1 = CONFIG_SYS_OR_TIMING_FLASH | (0 - size_b1);
 
 	flash_info[0].size = size_b0;
 	flash_info[1].size = size_b1;
@@ -395,7 +395,7 @@ int	flash_erase (flash_info_t *info, int s_first, int s_last)
 	last  = start;
 	addr = (vu_short *)(info->start[l_sect]);
 	while ((addr[0] & 0x8080) != 0x8080) {
-		if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+		if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
 			printf ("Timeout\n");
 			return 1;
 		}
@@ -524,7 +524,7 @@ static int write_word (flash_info_t *info, ulong dest, ulong data)
 	/* data polling for D7 */
 	start = get_timer (0);
 	while ((*((vu_short *)dest) & 0x8080) != (sdata & 0x8080)) {
-		if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+		if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
 			return (1);
 		}
 	}
@@ -548,7 +548,7 @@ static int write_word (flash_info_t *info, ulong dest, ulong data)
 	/* data polling for D7 */
 	start = get_timer (0);
 	while ((*((vu_short *)dest + 1) & 0x8080) != (sdata & 0x8080)) {
-		if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+		if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
 			return (1);
 		}
 	}
diff --git a/board/v37/u-boot.lds b/board/v37/u-boot.lds
index 7bcf06155..bf78a3225 100644
--- a/board/v37/u-boot.lds
+++ b/board/v37/u-boot.lds
@@ -68,7 +68,7 @@ SECTIONS
 /*
     . = env_offset;
 */
-    common/environment.o	(.ppcenv)
+    common/env_embedded.o	(.ppcenv)
 
     *(.text)
     *(.fixup)
@@ -139,6 +139,7 @@ SECTIONS
    *(.dynbss)
    *(.bss)
    *(COMMON)
+   . = ALIGN(4);
   }
   _end = . ;
   PROVIDE (end = .);
diff --git a/board/v37/v37.c b/board/v37/v37.c
index 2067fedfc..9c7bad52f 100644
--- a/board/v37/v37.c
+++ b/board/v37/v37.c
@@ -92,7 +92,7 @@ int checkboard (void)
 
 phys_size_t initdram (int board_type)
 {
-    volatile immap_t     *immap  = (immap_t *)CFG_IMMR;
+    volatile immap_t     *immap  = (immap_t *)CONFIG_SYS_IMMR;
     volatile memctl8xx_t *memctl = &immap->im_memctl;
     unsigned long temp;
     volatile int delay_cnt;
@@ -136,8 +136,8 @@ phys_size_t initdram (int board_type)
 
 #ifdef	CONFIG_CAN_DRIVER
     /* Initialize OR3 / BR3 */
-    memctl->memc_or3 = CFG_OR3_CAN;
-    memctl->memc_br3 = CFG_BR3_CAN;
+    memctl->memc_or3 = CONFIG_SYS_OR3_CAN;
+    memctl->memc_br3 = CONFIG_SYS_BR3_CAN;
 
     /* Initialize MBMR */
     memctl->memc_mamr = MAMR_GPL_A4DIS;	/* GPL_A4 ouput line Disable */
@@ -191,7 +191,7 @@ phys_size_t initdram (int board_type)
 
 static long int dram_size ()
 {
-    volatile immap_t     *immap  = (immap_t *)CFG_IMMR;
+    volatile immap_t     *immap  = (immap_t *)CONFIG_SYS_IMMR;
     volatile sysconf8xx_t *siu = &immap->im_siu_conf;
     volatile pcmconf8xx_t *pcm = &immap->im_pcmcia;
     long int		  i, memory=1;
diff --git a/board/v38b/v38b.c b/board/v38b/v38b.c
index 8815a0cb4..d77429549 100644
--- a/board/v38b/v38b.c
+++ b/board/v38b/v38b.c
@@ -29,7 +29,7 @@
 #include <asm/processor.h>
 
 
-#ifndef CFG_RAMBOOT
+#ifndef CONFIG_SYS_RAMBOOT
 static void sdram_start(int hi_addr)
 {
 	long hi_addr_bit = hi_addr ? 0x01000000 : 0;
@@ -68,7 +68,7 @@ static void sdram_start(int hi_addr)
 	*(vu_long *) MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | hi_addr_bit;
 	__asm__ volatile ("sync");
 }
-#endif /* !CFG_RAMBOOT */
+#endif /* !CONFIG_SYS_RAMBOOT */
 
 
 phys_size_t initdram(int board_type)
@@ -77,7 +77,7 @@ phys_size_t initdram(int board_type)
 	ulong dramsize2 = 0;
 	uint svr, pvr;
 
-#ifndef CFG_RAMBOOT
+#ifndef CONFIG_SYS_RAMBOOT
 	ulong test1, test2;
 
 	/* setup SDRAM chip selects */
@@ -98,9 +98,9 @@ phys_size_t initdram(int board_type)
 
 	/* find RAM size using SDRAM CS0 only */
 	sdram_start(0);
-	test1 = get_ram_size((long *)CFG_SDRAM_BASE, 0x80000000);
+	test1 = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE, 0x80000000);
 	sdram_start(1);
-	test2 = get_ram_size((long *)CFG_SDRAM_BASE, 0x80000000);
+	test2 = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE, 0x80000000);
 	if (test1 > test2) {
 		sdram_start(0);
 		dramsize = test1;
@@ -123,10 +123,10 @@ phys_size_t initdram(int board_type)
 	/* find RAM size using SDRAM CS1 only */
 	if (!dramsize)
 		sdram_start(0);
-	test2 = test1 = get_ram_size((long *) (CFG_SDRAM_BASE + dramsize), 0x80000000);
+	test2 = test1 = get_ram_size((long *) (CONFIG_SYS_SDRAM_BASE + dramsize), 0x80000000);
 	if (!dramsize) {
 		sdram_start(1);
-		test2 = get_ram_size((long *) (CFG_SDRAM_BASE + dramsize), 0x80000000);
+		test2 = get_ram_size((long *) (CONFIG_SYS_SDRAM_BASE + dramsize), 0x80000000);
 	}
 	if (test1 > test2) {
 		sdram_start(0);
@@ -145,7 +145,7 @@ phys_size_t initdram(int board_type)
 	else
 		*(vu_long *) MPC5XXX_SDRAM_CS1CFG = dramsize; /* disabled */
 
-#else /* CFG_RAMBOOT */
+#else /* CONFIG_SYS_RAMBOOT */
 
 	/* retrieve size of memory connected to SDRAM CS0 */
 	dramsize = *(vu_long *) MPC5XXX_SDRAM_CS0CFG & 0xFF;
@@ -161,7 +161,7 @@ phys_size_t initdram(int board_type)
 	else
 		dramsize2 = 0;
 
-#endif /* CFG_RAMBOOT */
+#endif /* CONFIG_SYS_RAMBOOT */
 
 	/*
 	 * On MPC5200B we need to set the special configuration delay in the
diff --git a/board/versatile/flash.c b/board/versatile/flash.c
index bbe5df724..3bdc895ec 100644
--- a/board/versatile/flash.c
+++ b/board/versatile/flash.c
@@ -32,7 +32,7 @@
 #include <linux/byteorder/swab.h>
 
 #define PHYS_FLASH_SECT_SIZE	0x00020000	/* 256 KB sectors (x2) */
-flash_info_t flash_info[CFG_MAX_FLASH_BANKS];	/* info for FLASH chips    */
+flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];	/* info for FLASH chips    */
 
 /* Board support for 1 or 2 flash devices */
 #define FLASH_PORT_WIDTH32
@@ -101,7 +101,7 @@ unsigned long flash_init (void)
 {
 	int i;
 	ulong size = 0;
-	for (i = 0; i < CFG_MAX_FLASH_BANKS; i++) {
+	for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) {
 		switch (i) {
 		case 0:
 		        flash_vpp(1);
@@ -119,8 +119,8 @@ unsigned long flash_init (void)
 	/* Protect monitor and environment sectors
 	 */
 	flash_protect (FLAG_PROTECT_SET,
-			CFG_FLASH_BASE,
-			CFG_FLASH_BASE + monitor_flash_len - 1, &flash_info[0]);
+			CONFIG_SYS_FLASH_BASE,
+			CONFIG_SYS_FLASH_BASE + monitor_flash_len - 1, &flash_info[0]);
 
 	return size;
 }
@@ -246,10 +246,10 @@ static ulong flash_get_size (FPW * addr, flash_info_t * info)
 		break;
 	}
 
-	if (info->sector_count > CFG_MAX_FLASH_SECT) {
+	if (info->sector_count > CONFIG_SYS_MAX_FLASH_SECT) {
 		printf ("** ERROR: sector count %d > max (%d) **\n",
-				info->sector_count, CFG_MAX_FLASH_SECT);
-		info->sector_count = CFG_MAX_FLASH_SECT;
+				info->sector_count, CONFIG_SYS_MAX_FLASH_SECT);
+		info->sector_count = CONFIG_SYS_MAX_FLASH_SECT;
 	}
 
 	addr[0] = (FPW) 0x00FF00FF;	/* restore read mode */
@@ -342,7 +342,7 @@ int flash_erase (flash_info_t * info, int s_first, int s_last)
 				*addr) & (FPW) 0x00800080) !=
 				(FPW) 0x00800080) {
 					if (get_timer_masked () >
-					CFG_FLASH_ERASE_TOUT) {
+					CONFIG_SYS_FLASH_ERASE_TOUT) {
 					printf ("Timeout\n");
 					/* suspend erase     */
 					*addr = (FPW) 0x00B000B0;
@@ -493,7 +493,7 @@ static int write_data (flash_info_t * info, ulong dest, FPW data)
 
 	/* wait while polling the status register */
 	while (((status = *addr) & (FPW) 0x00800080) != (FPW) 0x00800080) {
-		if (get_timer_masked () > CFG_FLASH_WRITE_TOUT) {
+		if (get_timer_masked () > CONFIG_SYS_FLASH_WRITE_TOUT) {
 			*addr = (FPW) 0x00FF00FF;	/* restore read mode */
 			flash_vpp(0);
 			return (1);
diff --git a/board/versatile/u-boot.lds b/board/versatile/u-boot.lds
index 82cb8e311..6e6e29bb6 100644
--- a/board/versatile/u-boot.lds
+++ b/board/versatile/u-boot.lds
@@ -46,6 +46,6 @@ SECTIONS
 
 	. = ALIGN(4);
 	__bss_start = .;
-	.bss (NOLOAD) : { *(.bss) }
+	.bss (NOLOAD) : { *(.bss) . = ALIGN(4); }
 	_end = .;
 }
diff --git a/board/versatile/versatile.c b/board/versatile/versatile.c
index 3b9b0207a..0f35caa9b 100644
--- a/board/versatile/versatile.c
+++ b/board/versatile/versatile.c
@@ -37,10 +37,6 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
-void flash__init (void);
-void ether__init (void);
-void peripheral_power_enable (void);
-
 #if defined(CONFIG_SHOW_BOOT_PROGRESS)
 void show_boot_progress(int progress)
 {
@@ -82,8 +78,6 @@ int board_init (void)
 
 	icache_enable ();
 
-	flash__init ();
-	ether__init ();
 	return 0;
 }
 
@@ -98,22 +92,6 @@ int misc_init_r (void)
  Routine:
  Description:
 ******************************/
-void flash__init (void)
-{
-}
-/*************************************************************
- Routine:ether__init
- Description: take the Ethernet controller out of reset and wait
-			   for the EEPROM load to complete.
-*************************************************************/
-void ether__init (void)
-{
-}
-
-/******************************
- Routine:
- Description:
-******************************/
 int dram_init (void)
 {
 	return 0;
diff --git a/board/voiceblue/eeprom.c b/board/voiceblue/eeprom.c
index d8ea6e573..f01597ad1 100644
--- a/board/voiceblue/eeprom.c
+++ b/board/voiceblue/eeprom.c
@@ -26,6 +26,7 @@
 
 #include <common.h>
 #include <exports.h>
+#include <timestamp.h>
 #include "../drivers/net/smc91111.h"
 
 #define SMC_BASE_ADDRESS CONFIG_SMC91111_BASE
@@ -169,7 +170,7 @@ int eeprom(int argc, char *argv[])
 	/* Print help message */
 	if (argv[1][1] == 'h') {
 		printf("VoiceBlue EEPROM writer\n");
-		printf("Built: %s at %s\n", __DATE__ , __TIME__ );
+		printf("Built: %s at %s\n", U_BOOT_DATE, U_BOOT_TIME);
 		printf("Usage:\n\t<mac_address> [<element_1>] [<...>]\n");
 		return 0;
 	}
diff --git a/board/voiceblue/eeprom.lds b/board/voiceblue/eeprom.lds
index 89b0a8209..f3be320df 100644
--- a/board/voiceblue/eeprom.lds
+++ b/board/voiceblue/eeprom.lds
@@ -46,6 +46,6 @@ SECTIONS
 
 	. = ALIGN(4);
 	__bss_start = .;
-	.bss (NOLOAD) : { *(.bss) }
+	.bss (NOLOAD) : { *(.bss) . = ALIGN(4); }
 	_end = .;
 }
diff --git a/board/voiceblue/u-boot.lds b/board/voiceblue/u-boot.lds
index bce925bbf..8bf199079 100644
--- a/board/voiceblue/u-boot.lds
+++ b/board/voiceblue/u-boot.lds
@@ -51,6 +51,6 @@ SECTIONS
 
 	. = ALIGN(4);
 	__bss_start = .;
-	.bss (NOLOAD) : { *(.bss) }
+	.bss (NOLOAD) : { *(.bss) . = ALIGN(4); }
 	_end = .;
 }
diff --git a/board/w7o/cmd_vpd.c b/board/w7o/cmd_vpd.c
index fdd6ceb8b..310fde052 100644
--- a/board/w7o/cmd_vpd.c
+++ b/board/w7o/cmd_vpd.c
@@ -35,7 +35,7 @@
 int do_vpd (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
 {
 	VPD vpd;			/* Board specific data struct */
-	uchar dev_addr = CFG_DEF_EEPROM_ADDR;
+	uchar dev_addr = CONFIG_SYS_DEF_EEPROM_ADDR;
 
 	/* Validate usage */
 	if (argc > 2) {
diff --git a/board/w7o/flash.c b/board/w7o/flash.c
index 32815fb63..677494977 100644
--- a/board/w7o/flash.c
+++ b/board/w7o/flash.c
@@ -29,7 +29,7 @@
 
 #include <watchdog.h>
 
-flash_info_t    flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips    */
+flash_info_t    flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips    */
 
 /*-----------------------------------------------------------------------
  * Functions
@@ -49,7 +49,7 @@ unsigned long flash_init (void)
     unsigned long size_b1, base_b1;
 
     /* Init: no FLASHes known */
-    for (i = 0; i < CFG_MAX_FLASH_BANKS; ++i) {
+    for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
 	flash_info[i].flash_id = FLASH_UNKNOWN;
     }
 
@@ -90,13 +90,13 @@ unsigned long flash_init (void)
     /* Protect the FPGA image */
     (void)flash_protect(FLAG_PROTECT_SET,
 			FLASH_BASE1_PRELIM,
-			FLASH_BASE1_PRELIM + CFG_FPGA_IMAGE_LEN - 1,
+			FLASH_BASE1_PRELIM + CONFIG_SYS_FPGA_IMAGE_LEN - 1,
 			&flash_info[1]);
 
     /* Protect the default boot image */
     (void)flash_protect(FLAG_PROTECT_SET,
-			FLASH_BASE1_PRELIM + CFG_FPGA_IMAGE_LEN,
-			FLASH_BASE1_PRELIM + CFG_FPGA_IMAGE_LEN + 0x600000 - 1,
+			FLASH_BASE1_PRELIM + CONFIG_SYS_FPGA_IMAGE_LEN,
+			FLASH_BASE1_PRELIM + CONFIG_SYS_FPGA_IMAGE_LEN + 0x600000 - 1,
 			&flash_info[1]);
 
     /* Setup offsets for Main Flash */
@@ -294,11 +294,11 @@ static ulong flash_get_size (vu_long *addr, flash_info_t *info)
 	}
     }
 
-    /* Make sure we don't exceed CFG_MAX_FLASH_SECT */
-    if (info->sector_count > CFG_MAX_FLASH_SECT) {
+    /* Make sure we don't exceed CONFIG_SYS_MAX_FLASH_SECT */
+    if (info->sector_count > CONFIG_SYS_MAX_FLASH_SECT) {
 	printf ("** ERROR: sector count %d > max (%d) **\n",
-		info->sector_count, CFG_MAX_FLASH_SECT);
-	info->sector_count = CFG_MAX_FLASH_SECT;
+		info->sector_count, CONFIG_SYS_MAX_FLASH_SECT);
+	info->sector_count = CONFIG_SYS_MAX_FLASH_SECT;
     }
 
     /* set up sector start address table */
@@ -520,7 +520,7 @@ static int flash_erase32(flash_info_t *info, int s_first, int s_last)
 	    udelay (1000);
 
 	    while (((status = *addr) & 0x00800080) != 0x00800080) {
-		if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+		if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
 		    printf ("Timeout\n");
 		    *addr = 0x00B000B0;      /* suspend erase      */
 		    *addr = 0x00FF00FF;      /* reset to read mode */
@@ -787,7 +787,7 @@ static int write_word32(flash_info_t *info, ulong dest, ulong data)
 
     while (((status = *addr) & 0x00800080) != 0x00800080) {
 	WATCHDOG_RESET();
-	if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+	if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
 	    *addr = 0x00FF00FF;              /* restore read mode */
 	    return (1);
 	}
diff --git a/board/w7o/init.S b/board/w7o/init.S
index 35d7dbceb..2fd84ba00 100644
--- a/board/w7o/init.S
+++ b/board/w7o/init.S
@@ -64,11 +64,11 @@ ext_bus_cntlr_init:
 	mflr	r3			/* get address of ..getAddr */
 
 	/* Calculate number of cache lines for this function */
-	addi	r4, 0, (((.Lfe0 - ..getAddr) / CFG_CACHELINE_SIZE) + 2)
+	addi	r4, 0, (((.Lfe0 - ..getAddr) / CONFIG_SYS_CACHELINE_SIZE) + 2)
 	mtctr	r4
 ..ebcloop:
 	icbt	r0, r3			/* prefetch cache line for addr in r3*/
-	addi	r3, r3, CFG_CACHELINE_SIZE /* move to next cache line */
+	addi	r3, r3, CONFIG_SYS_CACHELINE_SIZE /* move to next cache line */
 	bdnz	..ebcloop		/* continue for $CTR cache lines */
 
 	/********************************************************************
@@ -103,14 +103,14 @@ ext_bus_cntlr_init:
 	 *******************************************************************/
 	addi	r3, 0, pb0ap
 	mtdcr	ebccfga, r3
-	addis	r4, 0, CFG_W7O_EBC_PB0AP@h
-	ori	r4, r4, CFG_W7O_EBC_PB0AP@l
+	addis	r4, 0, CONFIG_SYS_W7O_EBC_PB0AP@h
+	ori	r4, r4, CONFIG_SYS_W7O_EBC_PB0AP@l
 	mtdcr	ebccfgd, r4
 
 	addi	r3, 0, pb0cr
 	mtdcr	ebccfga, r3
-	addis	r4, 0, CFG_W7O_EBC_PB0CR@h
-	ori	r4, r4, CFG_W7O_EBC_PB0CR@l
+	addis	r4, 0, CONFIG_SYS_W7O_EBC_PB0CR@h
+	ori	r4, r4, CONFIG_SYS_W7O_EBC_PB0CR@l
 	mtdcr	ebccfgd, r4
 
 	/********************************************************************
@@ -118,14 +118,14 @@ ext_bus_cntlr_init:
 	 *******************************************************************/
 	addi	r3, 0, pb7ap
 	mtdcr	ebccfga, r3
-	addis	r4, 0, CFG_W7O_EBC_PB7AP@h
-	ori	r4, r4, CFG_W7O_EBC_PB7AP@l
+	addis	r4, 0, CONFIG_SYS_W7O_EBC_PB7AP@h
+	ori	r4, r4, CONFIG_SYS_W7O_EBC_PB7AP@l
 	mtdcr	ebccfgd, r4
 
 	addi	r3, 0, pb7cr
 	mtdcr	ebccfga, r3
-	addis	r4, 0, CFG_W7O_EBC_PB7CR@h
-	ori	r4, r4, CFG_W7O_EBC_PB7CR@l
+	addis	r4, 0, CONFIG_SYS_W7O_EBC_PB7CR@h
+	ori	r4, r4, CONFIG_SYS_W7O_EBC_PB7CR@l
 	mtdcr	ebccfgd, r4
 
 	/* We are all done */
diff --git a/board/w7o/post2.c b/board/w7o/post2.c
index 6ee33eba3..1dfaa2f97 100644
--- a/board/w7o/post2.c
+++ b/board/w7o/post2.c
@@ -38,7 +38,7 @@
 #if defined(CONFIG_RTC_M48T35A)
 void rtctest(void)
 {
-    volatile uchar *tchar = (uchar*)(CFG_NVRAM_BASE_ADDR + CFG_NVRAM_SIZE - 9);
+    volatile uchar *tchar = (uchar*)(CONFIG_SYS_NVRAM_BASE_ADDR + CONFIG_SYS_NVRAM_SIZE - 9);
     struct rtc_time tmp;
 
     /* set up led code for RTC tests */
@@ -89,9 +89,9 @@ int dtt_test(int sensor)
     hyst = dtt_read(sensor, DTT_TEMP_HYST) / 256;
 
     /* check values */
-    if ((hyst != (CFG_DTT_MAX_TEMP - CFG_DTT_HYSTERESIS)) ||
-	(trip != CFG_DTT_MAX_TEMP) ||
-	(temp < CFG_DTT_LOW_TEMP) || (temp > CFG_DTT_MAX_TEMP))
+    if ((hyst != (CONFIG_SYS_DTT_MAX_TEMP - CONFIG_SYS_DTT_HYSTERESIS)) ||
+	(trip != CONFIG_SYS_DTT_MAX_TEMP) ||
+	(temp < CONFIG_SYS_DTT_LOW_TEMP) || (temp > CONFIG_SYS_DTT_MAX_TEMP))
 	return 1;
 
     return 0;
diff --git a/board/w7o/u-boot.lds b/board/w7o/u-boot.lds
index 3373793c6..80e960b9d 100644
--- a/board/w7o/u-boot.lds
+++ b/board/w7o/u-boot.lds
@@ -128,6 +128,7 @@ SECTIONS
    *(.dynbss)
    *(.bss)
    *(COMMON)
+   . = ALIGN(4);
   }
   _end = . ;
   PROVIDE (end = .);
diff --git a/board/w7o/u-boot.lds.debug b/board/w7o/u-boot.lds.debug
index d3ffed300..d2089de9d 100644
--- a/board/w7o/u-boot.lds.debug
+++ b/board/w7o/u-boot.lds.debug
@@ -61,7 +61,7 @@ SECTIONS
     lib_generic/crc32.o		(.text)
     lib_ppc/extable.o	(.text)
 
-    common/environment.o(.text)
+    common/env_embedded.o(.text)
 
     *(.text)
     *(.fixup)
diff --git a/board/w7o/vpd.c b/board/w7o/vpd.c
index 2ce15680e..57558e88f 100644
--- a/board/w7o/vpd.c
+++ b/board/w7o/vpd.c
@@ -24,7 +24,7 @@
 #if defined(VXWORKS)
 # include <stdio.h>
 # include <string.h>
-# define CFG_DEF_EEPROM_ADDR 0xa0
+# define CONFIG_SYS_DEF_EEPROM_ADDR 0xa0
 extern char iicReadByte( char, char );
 extern ulong_t crc32( unsigned char *, unsigned long );
 #else
@@ -47,7 +47,7 @@ vpd_reader(unsigned char *buf, unsigned dev_addr, unsigned off, unsigned count)
      * SDRAM SPD in the first 128 bytes,
      * so skew the offset.
      */
-    if (dev_addr == CFG_DEF_EEPROM_ADDR)
+    if (dev_addr == CONFIG_SYS_DEF_EEPROM_ADDR)
 	offset += SDRAM_SPD_DATA_SIZE;
 
     /* Try to read the I2C EEPROM */
@@ -127,7 +127,7 @@ static int vpd_is_valid(unsigned dev_addr, unsigned char *buf)
     /* Check Eyecatcher */
     if (strncmp((char *)(vpd->header.eyecatcher), VPD_EYECATCHER, VPD_EYE_SIZE) != 0) {
 	unsigned offset = 0;
-	if (dev_addr == CFG_DEF_EEPROM_ADDR)
+	if (dev_addr == CONFIG_SYS_DEF_EEPROM_ADDR)
 	    offset += SDRAM_SPD_DATA_SIZE;
 	printf("Error: VPD EEPROM 0x%x corrupt @ 0x%x\n", dev_addr, offset);
 
diff --git a/board/w7o/w7o.c b/board/w7o/w7o.c
index 0e3b84c61..22cdfcd7d 100644
--- a/board/w7o/w7o.c
+++ b/board/w7o/w7o.c
@@ -132,7 +132,7 @@ int checkboard (void)
 	puts ("Board: ");
 
 	/* VPD data present in I2C EEPROM */
-	if (vpd_get_data (CFG_DEF_EEPROM_ADDR, &vpd) == 0) {
+	if (vpd_get_data (CONFIG_SYS_DEF_EEPROM_ADDR, &vpd) == 0) {
 		/*
 		 * Known board type.
 		 */
@@ -204,7 +204,7 @@ static void w7o_env_init (VPD * vpd)
 	/*
 	 * Read VPD
 	 */
-	if (vpd_get_data (CFG_DEF_EEPROM_ADDR, vpd) != 0)
+	if (vpd_get_data (CONFIG_SYS_DEF_EEPROM_ADDR, vpd) != 0)
 		return;
 
 	/*
diff --git a/board/w7o/watchdog.c b/board/w7o/watchdog.c
index 4bbd94f60..131399c9e 100644
--- a/board/w7o/watchdog.c
+++ b/board/w7o/watchdog.c
@@ -32,7 +32,7 @@
 
 void hw_watchdog_reset(void)
 {
-    volatile ushort *hwd = (ushort *)(CFG_W7O_EBC_PB7CR & 0xfff00000);
+    volatile ushort *hwd = (ushort *)(CONFIG_SYS_W7O_EBC_PB7CR & 0xfff00000);
 
     /*
      * Read the LMG's hwd register and toggle the
diff --git a/board/wepep250/flash.c b/board/wepep250/flash.c
index e2e08f742..c6e917167 100644
--- a/board/wepep250/flash.c
+++ b/board/wepep250/flash.c
@@ -82,7 +82,7 @@
 #endif
 
 
-flash_info_t flash_info[CFG_MAX_FLASH_BANKS];
+flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];
 
 static FLASH_BUS_RET flash_status_reg (void)
 {
@@ -109,7 +109,7 @@ static int flash_ready (ulong timeout)
 	return ok;
 }
 
-#if ( CFG_MAX_FLASH_BANKS != 1 )
+#if ( CONFIG_SYS_MAX_FLASH_BANKS != 1 )
 #  error "WEP platform has only one flash bank!"
 #endif
 
@@ -120,11 +120,11 @@ ulong flash_init (void)
 	FLASH_BUS address = WEP_FLASH_BASE;
 
 	flash_info[0].size = WEP_FLASH_BANK_SIZE;
-	flash_info[0].sector_count = CFG_MAX_FLASH_SECT;
+	flash_info[0].sector_count = CONFIG_SYS_MAX_FLASH_SECT;
 	flash_info[0].flash_id = INTEL_MANUFACT;
-	memset (flash_info[0].protect, 0, CFG_MAX_FLASH_SECT);
+	memset (flash_info[0].protect, 0, CONFIG_SYS_MAX_FLASH_SECT);
 
-	for (i = 0; i < CFG_MAX_FLASH_SECT; i++) {
+	for (i = 0; i < CONFIG_SYS_MAX_FLASH_SECT; i++) {
 		flash_info[0].start[i] = address;
 #ifdef WEP_FLASH_UNLOCK
 		/* Some devices are hw locked after start. */
@@ -137,13 +137,13 @@ ulong flash_init (void)
 	}
 
 	flash_protect (FLAG_PROTECT_SET,
-				   CFG_FLASH_BASE,
-				   CFG_FLASH_BASE + monitor_flash_len - 1,
+				   CONFIG_SYS_FLASH_BASE,
+				   CONFIG_SYS_FLASH_BASE + monitor_flash_len - 1,
 				   &flash_info[0]);
 
 	flash_protect (FLAG_PROTECT_SET,
-				   CFG_ENV_ADDR,
-				   CFG_ENV_ADDR + CFG_ENV_SIZE - 1, &flash_info[0]);
+				   CONFIG_ENV_ADDR,
+				   CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1, &flash_info[0]);
 
 	return WEP_FLASH_BANK_SIZE;
 }
@@ -209,7 +209,7 @@ int flash_erase (flash_info_t * info, int s_first, int s_last)
 
 		*address = FLASH_CMD (CFI_INTEL_CMD_BLOCK_ERASE);
 		*address = FLASH_CMD (CFI_INTEL_CMD_CONFIRM);
-		if (flash_ready (CFG_FLASH_ERASE_TOUT)) {
+		if (flash_ready (CONFIG_SYS_FLASH_ERASE_TOUT)) {
 			*address = FLASH_CMD (CFI_INTEL_CMD_CLEAR_STATUS_REGISTER);
 			printf ("ok.\n");
 		} else {
@@ -257,7 +257,7 @@ static int write_data (flash_info_t * info, ulong dest, FLASH_BUS data)
 	*address = FLASH_CMD (CFI_INTEL_CMD_PROGRAM1);
 	*address = data;
 
-	if (!flash_ready (CFG_FLASH_WRITE_TOUT)) {
+	if (!flash_ready (CONFIG_SYS_FLASH_WRITE_TOUT)) {
 		*address = FLASH_CMD (CFI_INTEL_CMD_SUSPEND);
 		rc = ERR_TIMOUT;
 		printf ("timeout! Aborting...\n");
diff --git a/board/wepep250/u-boot.lds b/board/wepep250/u-boot.lds
index 14d264a68..7cf9fdf63 100644
--- a/board/wepep250/u-boot.lds
+++ b/board/wepep250/u-boot.lds
@@ -51,6 +51,6 @@ SECTIONS
 
 	. = ALIGN(4);
 	__bss_start = .;
-	.bss (NOLOAD) : { *(.bss) }
+	.bss (NOLOAD) : { *(.bss) . = ALIGN(4); }
 	_end = .;
 }
diff --git a/board/westel/amx860/amx860.c b/board/westel/amx860/amx860.c
index 4742aafc5..91dcc0dcb 100644
--- a/board/westel/amx860/amx860.c
+++ b/board/westel/amx860/amx860.c
@@ -64,7 +64,7 @@ int checkboard (void)
 phys_size_t initdram (int board_type)
 {
 
-	volatile immap_t     *immap = (immap_t *)CFG_IMMR;
+	volatile immap_t     *immap = (immap_t *)CONFIG_SYS_IMMR;
 	volatile memctl8xx_t *memctl = &immap->im_memctl;
 
 	/* AMX860: has 4 Mb of 60ns EDO DRAM, so start DRAM at 0 */
diff --git a/board/westel/amx860/flash.c b/board/westel/amx860/flash.c
index 12a1335b7..fe8bce412 100644
--- a/board/westel/amx860/flash.c
+++ b/board/westel/amx860/flash.c
@@ -24,17 +24,17 @@
 #include <common.h>
 #include <mpc8xx.h>
 
-flash_info_t	flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips	*/
+flash_info_t	flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips	*/
 
-#if defined(CFG_ENV_IS_IN_FLASH)
-# ifndef  CFG_ENV_ADDR
-#  define CFG_ENV_ADDR	(CFG_FLASH_BASE + CFG_ENV_OFFSET)
+#if defined(CONFIG_ENV_IS_IN_FLASH)
+# ifndef  CONFIG_ENV_ADDR
+#  define CONFIG_ENV_ADDR	(CONFIG_SYS_FLASH_BASE + CONFIG_ENV_OFFSET)
 # endif
-# ifndef  CFG_ENV_SIZE
-#  define CFG_ENV_SIZE	CFG_ENV_SECT_SIZE
+# ifndef  CONFIG_ENV_SIZE
+#  define CONFIG_ENV_SIZE	CONFIG_ENV_SECT_SIZE
 # endif
-# ifndef  CFG_ENV_SECT_SIZE
-#  define CFG_ENV_SECT_SIZE  CFG_ENV_SIZE
+# ifndef  CONFIG_ENV_SECT_SIZE
+#  define CONFIG_ENV_SECT_SIZE  CONFIG_ENV_SIZE
 # endif
 #endif
 
@@ -60,13 +60,13 @@ static void flash_get_offsets (ulong base, flash_info_t *info);
 
 unsigned long flash_init (void)
 {
-	volatile immap_t     *immap  = (immap_t *)CFG_IMMR;
+	volatile immap_t     *immap  = (immap_t *)CONFIG_SYS_IMMR;
 	volatile memctl8xx_t *memctl = &immap->im_memctl;
 	unsigned long size_b0, size_b1;
 	int i;
 
 	/* Init: no FLASHes known */
-	for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) {
+	for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
 		flash_info[i].flash_id = FLASH_UNKNOWN;
 	}
 
@@ -113,64 +113,64 @@ unsigned long flash_init (void)
 		memctl->memc_br1, memctl->memc_or1);
 
 	/* Remap FLASH according to real size */
-	memctl->memc_or0 = CFG_OR_TIMING_FLASH | (-size_b0 & OR_AM_MSK);
-	memctl->memc_br0 = (CFG_FLASH_BASE & BR_BA_MSK) | BR_MS_GPCM | BR_V;
+	memctl->memc_or0 = CONFIG_SYS_OR_TIMING_FLASH | (-size_b0 & OR_AM_MSK);
+	memctl->memc_br0 = (CONFIG_SYS_FLASH_BASE & BR_BA_MSK) | BR_MS_GPCM | BR_V;
 
 	DEBUGF("## BR0: 0x%08x    OR0: 0x%08x\n",
 		memctl->memc_br0, memctl->memc_or0);
 
 	/* Re-do sizing to get full correct info */
-	size_b0 = flash_get_size((vu_long *)CFG_FLASH_BASE, &flash_info[0]);
+	size_b0 = flash_get_size((vu_long *)CONFIG_SYS_FLASH_BASE, &flash_info[0]);
 
-	flash_get_offsets (CFG_FLASH_BASE, &flash_info[0]);
+	flash_get_offsets (CONFIG_SYS_FLASH_BASE, &flash_info[0]);
 
 	flash_info[0].size = size_b0;
 
-#if CFG_MONITOR_BASE >= CFG_FLASH_BASE
+#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE
 	/* monitor protection ON by default */
 	flash_protect(FLAG_PROTECT_SET,
-		      CFG_MONITOR_BASE,
-		      CFG_MONITOR_BASE+monitor_flash_len-1,
+		      CONFIG_SYS_MONITOR_BASE,
+		      CONFIG_SYS_MONITOR_BASE+monitor_flash_len-1,
 		      &flash_info[0]);
 #endif
 
-#ifdef	CFG_ENV_IS_IN_FLASH
+#ifdef	CONFIG_ENV_IS_IN_FLASH
 	/* ENV protection ON by default */
 	flash_protect(FLAG_PROTECT_SET,
-		      CFG_ENV_ADDR,
-		      CFG_ENV_ADDR+CFG_ENV_SECT_SIZE-1,
+		      CONFIG_ENV_ADDR,
+		      CONFIG_ENV_ADDR+CONFIG_ENV_SECT_SIZE-1,
 		      &flash_info[0]);
 #endif
 
 	if (size_b1) {
-		memctl->memc_or1 = CFG_OR_TIMING_FLASH | (-size_b1 & OR_AM_MSK);
-		memctl->memc_br1 = ((CFG_FLASH_BASE + size_b0) & BR_BA_MSK) |
+		memctl->memc_or1 = CONFIG_SYS_OR_TIMING_FLASH | (-size_b1 & OR_AM_MSK);
+		memctl->memc_br1 = ((CONFIG_SYS_FLASH_BASE + size_b0) & BR_BA_MSK) |
 				   BR_MS_GPCM | BR_V;
 
 		DEBUGF("## BR1: 0x%08x    OR1: 0x%08x\n",
 			memctl->memc_br1, memctl->memc_or1);
 
 		/* Re-do sizing to get full correct info */
-		size_b1 = flash_get_size((vu_long *)(CFG_FLASH_BASE + size_b0),
+		size_b1 = flash_get_size((vu_long *)(CONFIG_SYS_FLASH_BASE + size_b0),
 					  &flash_info[1]);
 
 		flash_info[1].size = size_b1;
 
-		flash_get_offsets (CFG_FLASH_BASE + size_b0, &flash_info[1]);
+		flash_get_offsets (CONFIG_SYS_FLASH_BASE + size_b0, &flash_info[1]);
 
-# if CFG_MONITOR_BASE >= CFG_FLASH_BASE
+# if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE
 		/* monitor protection ON by default */
 		flash_protect(FLAG_PROTECT_SET,
-			      CFG_MONITOR_BASE,
-			      CFG_MONITOR_BASE+monitor_flash_len-1,
+			      CONFIG_SYS_MONITOR_BASE,
+			      CONFIG_SYS_MONITOR_BASE+monitor_flash_len-1,
 			      &flash_info[1]);
 # endif
 
-# ifdef CFG_ENV_IS_IN_FLASH
+# ifdef CONFIG_ENV_IS_IN_FLASH
 		/* ENV protection ON by default */
 		flash_protect(FLAG_PROTECT_SET,
-			      CFG_ENV_ADDR,
-			      CFG_ENV_ADDR+CFG_ENV_SECT_SIZE-1,
+			      CONFIG_ENV_ADDR,
+			      CONFIG_ENV_ADDR+CONFIG_ENV_SECT_SIZE-1,
 			      &flash_info[1]);
 #endif
 	} else {
@@ -503,7 +503,7 @@ int	flash_erase (flash_info_t *info, int s_first, int s_last)
 	last  = start;
 	addr = (vu_long*)(info->start[l_sect]);
 	while ((addr[0] & 0x00800080) != 0x00800080) {
-		if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+		if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
 			printf ("Timeout\n");
 			return 1;
 		}
@@ -626,7 +626,7 @@ static int write_word (flash_info_t *info, ulong dest, ulong data)
 	/* data polling for D7 */
 	start = get_timer (0);
 	while ((*((vu_long *)dest) & 0x00800080) != (data & 0x00800080)) {
-		if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+		if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
 			return (1);
 		}
 	}
diff --git a/board/westel/amx860/u-boot.lds b/board/westel/amx860/u-boot.lds
index 10b38ec35..ef9a2515c 100644
--- a/board/westel/amx860/u-boot.lds
+++ b/board/westel/amx860/u-boot.lds
@@ -63,7 +63,7 @@ SECTIONS
     lib_generic/zlib.o		(.text)
 
     . = env_offset;
-    common/environment.o(.text)
+    common/env_embedded.o(.text)
 
     *(.text)
     *(.fixup)
@@ -134,6 +134,7 @@ SECTIONS
    *(.dynbss)
    *(.bss)
    *(COMMON)
+   . = ALIGN(4);
   }
   _end = . ;
   PROVIDE (end = .);
diff --git a/board/westel/amx860/u-boot.lds.debug b/board/westel/amx860/u-boot.lds.debug
index 7a7a40c23..dbd1f9d10 100644
--- a/board/westel/amx860/u-boot.lds.debug
+++ b/board/westel/amx860/u-boot.lds.debug
@@ -62,7 +62,7 @@ SECTIONS
     lib_ppc/extable.o	(.text)
 
     . = env_offset;
-    common/environment.o(.text)
+    common/env_embedded.o(.text)
 
     *(.text)
     *(.fixup)
diff --git a/board/xaeniax/flash.c b/board/xaeniax/flash.c
index 9874a14fb..b051c8984 100644
--- a/board/xaeniax/flash.c
+++ b/board/xaeniax/flash.c
@@ -28,7 +28,7 @@
 #include <linux/byteorder/swab.h>
 
 
-flash_info_t flash_info[CFG_MAX_FLASH_BANKS];	/* info for FLASH chips    */
+flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];	/* info for FLASH chips    */
 
 /* Board support for 1 or 2 flash devices */
 #define FLASH_PORT_WIDTH32
@@ -65,7 +65,7 @@ unsigned long flash_init (void)
 	int i;
 	ulong size = 0;
 
-	for (i = 0; i < CFG_MAX_FLASH_BANKS; i++) {
+	for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) {
 		switch (i) {
 		case 0:
 			flash_get_size ((FPW *) PHYS_FLASH_1, &flash_info[i]);
@@ -85,13 +85,13 @@ unsigned long flash_init (void)
 	/* Protect monitor and environment sectors
 	 */
 	flash_protect ( FLAG_PROTECT_SET,
-			CFG_FLASH_BASE,
-			CFG_FLASH_BASE + monitor_flash_len - 1,
+			CONFIG_SYS_FLASH_BASE,
+			CONFIG_SYS_FLASH_BASE + monitor_flash_len - 1,
 			&flash_info[0] );
 
 	flash_protect ( FLAG_PROTECT_SET,
-			CFG_ENV_ADDR,
-			CFG_ENV_ADDR + CFG_ENV_SIZE - 1, &flash_info[0] );
+			CONFIG_ENV_ADDR,
+			CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1, &flash_info[0] );
 
 	return size;
 }
@@ -203,10 +203,10 @@ static ulong flash_get_size (FPW *addr, flash_info_t *info)
 		break;
 	}
 
-	if (info->sector_count > CFG_MAX_FLASH_SECT) {
+	if (info->sector_count > CONFIG_SYS_MAX_FLASH_SECT) {
 		printf ("** ERROR: sector count %d > max (%d) **\n",
-			info->sector_count, CFG_MAX_FLASH_SECT);
-		info->sector_count = CFG_MAX_FLASH_SECT;
+			info->sector_count, CONFIG_SYS_MAX_FLASH_SECT);
+		info->sector_count = CONFIG_SYS_MAX_FLASH_SECT;
 	}
 
 	addr[0] = (FPW) 0x00FF00FF;		/* restore read mode */
@@ -276,7 +276,7 @@ int flash_erase (flash_info_t *info, int s_first, int s_last)
 			*addr = (FPW) 0x00D000D0;	/* erase confirm */
 
 			while (((status = *addr) & (FPW) 0x00800080) != (FPW) 0x00800080) {
-				if (get_timer_masked () > CFG_FLASH_ERASE_TOUT) {
+				if (get_timer_masked () > CONFIG_SYS_FLASH_ERASE_TOUT) {
 					printf ("Timeout\n");
 					*addr = (FPW) 0x00B000B0;	/* suspend erase     */
 					*addr = (FPW) 0x00FF00FF;	/* reset to read mode */
@@ -410,7 +410,7 @@ static int write_data (flash_info_t *info, ulong dest, FPW data)
 
 	/* wait while polling the status register */
 	while (((status = *addr) & (FPW) 0x00800080) != (FPW) 0x00800080) {
-		if (get_timer_masked () > CFG_FLASH_WRITE_TOUT) {
+		if (get_timer_masked () > CONFIG_SYS_FLASH_WRITE_TOUT) {
 			*addr = (FPW) 0x00FF00FF;	/* restore read mode */
 			return (1);
 		}
diff --git a/board/xaeniax/lowlevel_init.S b/board/xaeniax/lowlevel_init.S
index fe3e7128a..57e162005 100644
--- a/board/xaeniax/lowlevel_init.S
+++ b/board/xaeniax/lowlevel_init.S
@@ -29,7 +29,7 @@
 #include <version.h>
 #include <asm/arch/pxa-regs.h>
 
-DRAM_SIZE:  .long   CFG_DRAM_SIZE
+DRAM_SIZE:  .long   CONFIG_SYS_DRAM_SIZE
 
 /* wait for coprocessor write complete */
 	.macro CPWAIT reg
@@ -47,67 +47,67 @@ lowlevel_init:
 	/* Set up GPIO pins first ----------------------------------------- */
 
 	ldr	r0,=GPSR0
-	ldr	r1,=CFG_GPSR0_VAL
+	ldr	r1,=CONFIG_SYS_GPSR0_VAL
 	str	r1,[r0]
 
 	ldr	r0,=GPSR1
-	ldr	r1,=CFG_GPSR1_VAL
+	ldr	r1,=CONFIG_SYS_GPSR1_VAL
 	str	r1,[r0]
 
 	ldr	r0,=GPSR2
-	ldr	r1,=CFG_GPSR2_VAL
+	ldr	r1,=CONFIG_SYS_GPSR2_VAL
 	str	r1,[r0]
 
 	ldr	r0,=GPCR0
-	ldr	r1,=CFG_GPCR0_VAL
+	ldr	r1,=CONFIG_SYS_GPCR0_VAL
 	str	r1,[r0]
 
 	ldr	r0,=GPCR1
-	ldr	r1,=CFG_GPCR1_VAL
+	ldr	r1,=CONFIG_SYS_GPCR1_VAL
 	str	r1,[r0]
 
 	ldr	r0,=GPCR2
-	ldr	r1,=CFG_GPCR2_VAL
+	ldr	r1,=CONFIG_SYS_GPCR2_VAL
 	str	r1,[r0]
 
 	ldr	r0,=GPDR0
-	ldr	r1,=CFG_GPDR0_VAL
+	ldr	r1,=CONFIG_SYS_GPDR0_VAL
 	str	r1,[r0]
 
 	ldr	r0,=GPDR1
-	ldr	r1,=CFG_GPDR1_VAL
+	ldr	r1,=CONFIG_SYS_GPDR1_VAL
 	str	r1,[r0]
 
 	ldr	r0,=GPDR2
-	ldr	r1,=CFG_GPDR2_VAL
+	ldr	r1,=CONFIG_SYS_GPDR2_VAL
 	str	r1,[r0]
 
 	ldr	r0,=GAFR0_L
-	ldr	r1,=CFG_GAFR0_L_VAL
+	ldr	r1,=CONFIG_SYS_GAFR0_L_VAL
 	str	r1,[r0]
 
 	ldr	r0,=GAFR0_U
-	ldr	r1,=CFG_GAFR0_U_VAL
+	ldr	r1,=CONFIG_SYS_GAFR0_U_VAL
 	str	r1,[r0]
 
 	ldr	r0,=GAFR1_L
-	ldr	r1,=CFG_GAFR1_L_VAL
+	ldr	r1,=CONFIG_SYS_GAFR1_L_VAL
 	str	r1,[r0]
 
 	ldr	r0,=GAFR1_U
-	ldr	r1,=CFG_GAFR1_U_VAL
+	ldr	r1,=CONFIG_SYS_GAFR1_U_VAL
 	str	r1,[r0]
 
 	ldr	r0,=GAFR2_L
-	ldr	r1,=CFG_GAFR2_L_VAL
+	ldr	r1,=CONFIG_SYS_GAFR2_L_VAL
 	str	r1,[r0]
 
 	ldr	r0,=GAFR2_U
-	ldr	r1,=CFG_GAFR2_U_VAL
+	ldr	r1,=CONFIG_SYS_GAFR2_U_VAL
 	str	r1,[r0]
 
 	ldr	r0,=PSSR		/* enable GPIO pins */
-	ldr	r1,=CFG_PSSR_VAL
+	ldr	r1,=CONFIG_SYS_PSSR_VAL
 	str	r1,[r0]
 
 	/* ---------------------------------------------------------------- */
@@ -145,17 +145,17 @@ mem_init:
 	/* MSC registers: timing, bus width, mem type                       */
 
 	/* MSC0: nCS(0,1)                                                   */
-	ldr     r2,=CFG_MSC0_VAL
+	ldr     r2,=CONFIG_SYS_MSC0_VAL
 	str     r2,[r1, #MSC0_OFFSET]
 	ldr     r2,[r1, #MSC0_OFFSET]	/* read back to ensure data latches */
 
 	/* MSC1: nCS(2,3)                                                   */
-	ldr     r2,=CFG_MSC1_VAL
+	ldr     r2,=CONFIG_SYS_MSC1_VAL
 	str     r2,[r1, #MSC1_OFFSET]
 	ldr     r2,[r1, #MSC1_OFFSET]
 
 	/* MSC2: nCS(4,5)                                                   */
-	ldr     r2,=CFG_MSC2_VAL
+	ldr     r2,=CONFIG_SYS_MSC2_VAL
 	str     r2,[r1, #MSC2_OFFSET]
 	ldr     r2,[r1, #MSC2_OFFSET]
 
@@ -164,37 +164,37 @@ mem_init:
 	/* ---------------------------------------------------------------- */
 
 	/* MECR: Memory Expansion Card Register                             */
-	ldr     r2,=CFG_MECR_VAL
+	ldr     r2,=CONFIG_SYS_MECR_VAL
 	str     r2,[r1, #MECR_OFFSET]
 	ldr	r2,[r1, #MECR_OFFSET]
 
 	/* MCMEM0: Card Interface slot 0 timing                             */
-	ldr     r2,=CFG_MCMEM0_VAL
+	ldr     r2,=CONFIG_SYS_MCMEM0_VAL
 	str     r2,[r1, #MCMEM0_OFFSET]
 	ldr	r2,[r1, #MCMEM0_OFFSET]
 
 	/* MCMEM1: Card Interface slot 1 timing                             */
-	ldr     r2,=CFG_MCMEM1_VAL
+	ldr     r2,=CONFIG_SYS_MCMEM1_VAL
 	str     r2,[r1, #MCMEM1_OFFSET]
 	ldr	r2,[r1, #MCMEM1_OFFSET]
 
 	/* MCATT0: Card Interface Attribute Space Timing, slot 0            */
-	ldr     r2,=CFG_MCATT0_VAL
+	ldr     r2,=CONFIG_SYS_MCATT0_VAL
 	str     r2,[r1, #MCATT0_OFFSET]
 	ldr	r2,[r1, #MCATT0_OFFSET]
 
 	/* MCATT1: Card Interface Attribute Space Timing, slot 1            */
-	ldr     r2,=CFG_MCATT1_VAL
+	ldr     r2,=CONFIG_SYS_MCATT1_VAL
 	str     r2,[r1, #MCATT1_OFFSET]
 	ldr	r2,[r1, #MCATT1_OFFSET]
 
 	/* MCIO0: Card Interface I/O Space Timing, slot 0                   */
-	ldr     r2,=CFG_MCIO0_VAL
+	ldr     r2,=CONFIG_SYS_MCIO0_VAL
 	str     r2,[r1, #MCIO0_OFFSET]
 	ldr	r2,[r1, #MCIO0_OFFSET]
 
 	/* MCIO1: Card Interface I/O Space Timing, slot 1                   */
-	ldr     r2,=CFG_MCIO1_VAL
+	ldr     r2,=CONFIG_SYS_MCIO1_VAL
 	str     r2,[r1, #MCIO1_OFFSET]
 	ldr	r2,[r1, #MCIO1_OFFSET]
 
@@ -207,7 +207,7 @@ mem_init:
 	/* ---------------------------------------------------------------- */
 
 	@ get the mdrefr settings
-	ldr     r4,=CFG_MDREFR_VAL
+	ldr     r4,=CONFIG_SYS_MDREFR_VAL
 
 	@ write back mdrefr
 	str     r4,[r1, #MDREFR_OFFSET]
@@ -261,7 +261,7 @@ mem_init:
 	/* Step 4d:							*/
 	/* fetch platform value of mdcnfg				*/
 	@
-	ldr     r2,  =CFG_MDCNFG_VAL
+	ldr     r2,  =CONFIG_SYS_MDCNFG_VAL
 
 	@ disable all sdram banks
 	@
@@ -296,7 +296,7 @@ mem_init:
 	/*          documented in SDRAM data sheets. The address(es) used   */
 	/*          for this purpose must not be cacheable.                 */
 
-	ldr	r3,	=CFG_DRAM_BASE
+	ldr	r3,	=CONFIG_SYS_DRAM_BASE
 	str	r2,	[r3]
 	str	r2,	[r3]
 	str	r2,	[r3]
@@ -326,7 +326,7 @@ mem_init:
 
 	/* Step 4h: Write MDMRS.                                            */
 
-	ldr     r2,	=CFG_MDMRS_VAL
+	ldr     r2,	=CONFIG_SYS_MDMRS_VAL
 	str     r2,	[r1, #MDMRS_OFFSET]
 
 
@@ -342,7 +342,7 @@ initirqs:
 	ldr     r2,  =ICLR
 	str     r1,  [r2]
 
-	ldr     r1,  =CFG_ICMR_VAL /* mask all interrupts at the controller */
+	ldr     r1,  =CONFIG_SYS_ICMR_VAL /* mask all interrupts at the controller */
 	ldr     r2,  =ICMR
 	str     r1,  [r2]
 
@@ -388,7 +388,7 @@ initclks:
 	@
 test:
 	ldr     r1,  =CKEN
-	ldr     r2,  =CFG_CKEN_VAL
+	ldr     r2,  =CONFIG_SYS_CKEN_VAL
 	str     r2,  [r1]
 
 	/* ---------------------------------------------------------------- */
diff --git a/board/xaeniax/u-boot.lds b/board/xaeniax/u-boot.lds
index 14d264a68..7cf9fdf63 100644
--- a/board/xaeniax/u-boot.lds
+++ b/board/xaeniax/u-boot.lds
@@ -51,6 +51,6 @@ SECTIONS
 
 	. = ALIGN(4);
 	__bss_start = .;
-	.bss (NOLOAD) : { *(.bss) }
+	.bss (NOLOAD) : { *(.bss) . = ALIGN(4); }
 	_end = .;
 }
diff --git a/board/xilinx/ml300/ml300.c b/board/xilinx/ml300/ml300.c
index 5d493eeb7..e64beccc1 100644
--- a/board/xilinx/ml300/ml300.c
+++ b/board/xilinx/ml300/ml300.c
@@ -42,7 +42,7 @@
 #include <common.h>
 #include <asm/processor.h>
 
-#ifdef CFG_ENV_IS_IN_EEPROM
+#ifdef CONFIG_ENV_IS_IN_EEPROM
 extern void convert_env(void);
 #endif
 
diff --git a/board/xilinx/ml300/serial.c b/board/xilinx/ml300/serial.c
index 993dfa30f..421551337 100644
--- a/board/xilinx/ml300/serial.c
+++ b/board/xilinx/ml300/serial.c
@@ -45,9 +45,9 @@
 DECLARE_GLOBAL_DATA_PTR;
 
 #define USE_CHAN1 \
-	((defined XPAR_UARTNS550_0_BASEADDR) && (defined CFG_INIT_CHAN1))
+	((defined XPAR_UARTNS550_0_BASEADDR) && (defined CONFIG_SYS_INIT_CHAN1))
 #define USE_CHAN2 \
-	((defined XPAR_UARTNS550_1_BASEADDR) && (defined CFG_INIT_CHAN2))
+	((defined XPAR_UARTNS550_1_BASEADDR) && (defined CONFIG_SYS_INIT_CHAN2))
 
 #if USE_CHAN1
 #include <ns16550.h>
@@ -82,21 +82,21 @@ void
 serial_putc(const char c)
 {
 	if (c == '\n')
-		NS16550_putc(COM_PORTS[CFG_DUART_CHAN], '\r');
+		NS16550_putc(COM_PORTS[CONFIG_SYS_DUART_CHAN], '\r');
 
-	NS16550_putc(COM_PORTS[CFG_DUART_CHAN], c);
+	NS16550_putc(COM_PORTS[CONFIG_SYS_DUART_CHAN], c);
 }
 
 int
 serial_getc(void)
 {
-	return NS16550_getc(COM_PORTS[CFG_DUART_CHAN]);
+	return NS16550_getc(COM_PORTS[CONFIG_SYS_DUART_CHAN]);
 }
 
 int
 serial_tstc(void)
 {
-	return NS16550_tstc(COM_PORTS[CFG_DUART_CHAN]);
+	return NS16550_tstc(COM_PORTS[CONFIG_SYS_DUART_CHAN]);
 }
 
 void
diff --git a/board/xilinx/ml300/sw_services/uboot_v1_00_a/data/Ltypes b/board/xilinx/ml300/sw_services/uboot_v1_00_a/data/Ltypes
deleted file mode 100644
index 9daf14709..000000000
--- a/board/xilinx/ml300/sw_services/uboot_v1_00_a/data/Ltypes
+++ /dev/null
@@ -1,55 +0,0 @@
-#!/bin/bash
-
-if [ $# -ne 1 ]
-then
-    echo "usage: Ltypes filename" >&2
-    exit 2
-fi
-
-FILE="$1"
-#TMPFILE='mktemp "${FILE}.XXXXXX"' || exit 1
-TMPFILE=${FILE}.`date "+%s"`
-touch $TMPFILE || exit 1
-
-# Change all the Xilinx types to Linux types and put the result into a temp file
-sed	\
-	-e 's/\bXTRUE\b/TRUE/g' \
-	-e 's/\bXFALSE\b/FALSE/g' \
-	-e 's/\bXNULL\b/NULL/g' \
-	-e 's/"xenv.h"/<asm\/delay.h>/g' \
-	-e 's/\bXENV_USLEEP\b/udelay/g' \
-	-e 's/\bXuint8\b/u8/g' \
-	-e 's/\bXuint16\b/u16/g' \
-	-e 's/\bXuint32\b/u32/g' \
-	-e 's/\bXint8\b/s8/g' \
-	-e 's/\bXint16\b/s16/g' \
-	-e 's/\bXint32\b/s32/g' \
-	-e 's/\bXboolean\b/u32/g' \
-	"${FILE}" > "${TMPFILE}"
-
-# Overlay the original file with the temp file
-mv "${TMPFILE}" "${FILE}"
-
-# Are we doing xbasic_types.h?
-if [ "${FILE##*/}" = xbasic_types.h ]
-then
-    # Remember as you're reading this that we've already gone through the prior
-    # sed script.  We need to do some other things to xbasic_types.h:
-    #   1) Add ifndefs around TRUE and FALSE defines
-    #   2) Remove definition of NULL as NULL
-    #   3) Replace most of the primitive types section with a #include
-    sed \
-	-e '/u32 true/,/#define false/Ic\
-#ifndef TRUE\
-#define TRUE 1\
-#endif\
-#ifndef FALSE\
-#define FALSE 0\
-#endif' \
-	-e '/#define[[:space:]][[:space:]]*NULL[[:space:]][[:space:]]*NULL/d' \
-	-e '/typedef[[:space:]][[:space:]]*unsigned[[:space:]][[:space:]]*char[[:space:]][[:space:]]*u8/,/typedef[[:space:]][[:space:]]*unsigned[[:space:]][[:space:]]*long[[:space:]][[:space:]]*u32.*boolean/c\
-#include <linux/types.h>' \
-	"${FILE}" > "${TMPFILE}"
-
-    mv "${TMPFILE}" "${FILE}"
-fi
diff --git a/board/xilinx/ml300/sw_services/uboot_v1_00_a/data/uboot_v2_1_0.mld b/board/xilinx/ml300/sw_services/uboot_v1_00_a/data/uboot_v2_1_0.mld
deleted file mode 100644
index 516924126..000000000
--- a/board/xilinx/ml300/sw_services/uboot_v1_00_a/data/uboot_v2_1_0.mld
+++ /dev/null
@@ -1,52 +0,0 @@
-# (c) Copyright 2004 Xilinx Inc.
-#     Author: Xilinx, Inc.
-#
-#
-#     This program is free software; you can redistribute it and/or modify it
-#     under the terms of the GNU General Public License as published by the
-#     Free Software Foundation; either version 2 of the License, or (at your
-#     option) any later version.
-#
-#
-#     XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS" AS A
-#     COURTESY TO YOU. BY PROVIDING THIS DESIGN, CODE, OR INFORMATION AS
-#     ONE POSSIBLE IMPLEMENTATION OF THIS FEATURE, APPLICATION OR STANDARD,
-#     XILINX IS MAKING NO REPRESENTATION THAT THIS IMPLEMENTATION IS FREE
-#     FROM ANY CLAIMS OF INFRINGEMENT, AND YOU ARE RESPONSIBLE FOR OBTAINING
-#     ANY THIRD PARTY RIGHTS YOU MAY REQUIRE FOR YOUR IMPLEMENTATION.
-#     XILINX EXPRESSLY DISCLAIMS ANY WARRANTY WHATSOEVER WITH RESPECT TO
-#     THE ADEQUACY OF THE IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY
-#     WARRANTIES OR REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM
-#     CLAIMS OF INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND
-#     FITNESS FOR A PARTICULAR PURPOSE.
-#
-#
-#     Xilinx hardware products are not intended for use in life support
-#     appliances, devices, or systems. Use in such applications is
-#     expressly prohibited.
-#
-#
-#     (c) Copyright 2002-2004 Xilinx Inc.
-#     All rights reserved.
-#
-#
-#     You should have received a copy of the GNU General Public License along
-#     with this program; if not, write to the Free Software Foundation, Inc.,
-#     675 Mass Ave, Cambridge, MA 02139, USA.
-
-OPTION psf_version = 2.1;
-
-BEGIN LIBRARY uboot OPTION DRC = uboot_drc;
-
-BEGIN ARRAY connected_periphs PROPERTY desc = "Peripherals connected to U-Boot";
-PROPERTY size = 0;
-PARAM name = periph_name, desc = "Name of Peripheral connected", type = string;
-END ARRAY
-    PARAMETER name = TARGET_DIR, desc = "Target Directory for U-Boot BSP", type = string;
-
-# location of persistent storage in the IIC EEPROM (defaults are set for ML300)
-PARAMETER name = IIC_PERSISTENT_BASEADDR, desc = "Start of persistent storage block in the EEPROM address space", type = int, default = 1024;
-PARAMETER name = IIC_PERSISTENT_HIGHADDR, desc = "End of persistent storage block in the EEPROM address space", type = int, default = 2047;
-PARAMETER name = IIC_PERSISTENT_EEPROMADDR, desc = "Address of the EEPROM on the IIC bus", type = int, default = 0xA0;
-
-END LIBRARY
diff --git a/board/xilinx/ml300/sw_services/uboot_v1_00_a/data/uboot_v2_1_0.tcl b/board/xilinx/ml300/sw_services/uboot_v1_00_a/data/uboot_v2_1_0.tcl
deleted file mode 100644
index 9d44f4493..000000000
--- a/board/xilinx/ml300/sw_services/uboot_v1_00_a/data/uboot_v2_1_0.tcl
+++ /dev/null
@@ -1,325 +0,0 @@
-#
-#      Author: Xilinx, Inc.
-#      
-#      
-#      This program is free software; you can redistribute it and/or modify it
-#      under the terms of the GNU General Public License as published by the
-#      Free Software Foundation; either version 2 of the License, or (at your
-#      option) any later version.
-#      
-#      
-#      XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS" AS A
-#      COURTESY TO YOU. BY PROVIDING THIS DESIGN, CODE, OR INFORMATION AS
-#      ONE POSSIBLE IMPLEMENTATION OF THIS FEATURE, APPLICATION OR STANDARD,
-#      XILINX IS MAKING NO REPRESENTATION THAT THIS IMPLEMENTATION IS FREE
-#      FROM ANY CLAIMS OF INFRINGEMENT, AND YOU ARE RESPONSIBLE FOR OBTAINING
-#      ANY THIRD PARTY RIGHTS YOU MAY REQUIRE FOR YOUR IMPLEMENTATION.
-#      XILINX EXPRESSLY DISCLAIMS ANY WARRANTY WHATSOEVER WITH RESPECT TO
-#      THE ADEQUACY OF THE IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY
-#      WARRANTIES OR REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM
-#      CLAIMS OF INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND
-#      FITNESS FOR A PARTICULAR PURPOSE.
-#      
-#      
-#      Xilinx hardware products are not intended for use in life support
-#      appliances, devices, or systems. Use in such applications is
-#      expressly prohibited.
-#      
-#      
-#      (c) Copyright 2002-2004 Xilinx Inc.
-#      All rights reserved.
-#      
-#      
-#      You should have received a copy of the GNU General Public License along
-#      with this program; if not, write to the Free Software Foundation, Inc.,
-#      675 Mass Ave, Cambridge, MA 02139, USA.
-#
-# Globals
-lappend drvlist
-set ltypes "../../../sw_services/uboot_v1_00_a/data/Ltypes"
-
-proc uboot_drc {lib_handle} {
-    puts "U-Boot DRC..."
-}
-
-proc generate {libname} {
-    
-    global drvlist
-    
-    # Get list of peripherals connected to uboot
-    set conn_periphs [xget_handle $libname "ARRAY" "connected_periphs"]
-    #lappend drvlist
-    if {[string compare -nocase $conn_periphs ""] != 0} {
-	set conn_periphs_elems [xget_handle $conn_periphs "ELEMENTS" "*"]
-	# For each periph
-	foreach periph_elem $conn_periphs_elems {
-	    set periph [xget_value $periph_elem "PARAMETER" "periph_name"]
-	    # 1. Get driver
-	    set drv [xget_swhandle $periph]
-	    set posn [lsearch -exact $drvlist $drv]
-	    if {$posn == -1} {
-		lappend drvlist $drv
-	    }
-	}
-	
-	set file_handle [xopen_include_file "xparameters.h"]
-	puts $file_handle "\n/******************************************************************/\n"
-	puts $file_handle "/* U-Boot Redefines */"
-	puts $file_handle "\n/******************************************************************/\n"
-	close $file_handle
-	
-	foreach drv $drvlist {
-	    set drvname [xget_value $drv "NAME"]
-	    
-	    #Redefines xparameters.h
-	    if {[string compare -nocase $drvname "uartns550"] == 0} {
-		xredefine_uartns550 $drv "xparameters.h"
-	    }  elseif {[string compare -nocase $drvname "emac"] == 0} {
-		xredefine_emac $drv "xparameters.h"
-	    }  elseif {[string compare -nocase $drvname "iic"] == 0} {
-		xredefine_iic $drv "xparameters.h"
-	    }
-	}
-    }
-    
-    # define core_clock
-    xredefine_params $libname "xparameters.h" "CORE_CLOCK_FREQ_HZ"
-
-    # define the values for the persistent storage in IIC
-    xredefine_params $libname "xparameters.h" "IIC_PERSISTENT_BASEADDR" "IIC_PERSISTENT_HIGHADDR" "IIC_PERSISTENT_EEPROMADDR"
-
-}
-
-proc xget_corefreq {} {
-    set processor [xget_processor] 
-    set name [xget_value $processor "NAME"]
-    puts "procname : $name"
-    set processor_driver [xget_swhandle [xget_value $processor "NAME"]]
-    puts "procdrv : $processor_driver"
-    if {[string compare -nocase $processor_driver ""] != 0} {
-	set arg "CORE_CLOCK_FREQ_HZ"
-	#set retval [xget_value $processor_driver "PARAMETER" $arg]
-	set retval [xget_dname [xget_value $processor_driver "NAME"] $arg]
-	return $retval
-    }
-}
-
-# procedure that adds # defines to xparameters.h as XPAR_argument
-proc xredefine_params {handle file_name args} {
-    
-    puts "xredfine ..."
-    # Open include file
-    set file_handle [xopen_include_file $file_name]
-    puts "args : $args"
-
-    foreach arg $args {
-	if {[string compare -nocase $arg "CORE_CLOCK_FREQ_HZ"] == 0} {
-	    set value [xget_corefreq]
-	    puts "corefreq : $value"
-	} else {
-	    set value [xget_value $handle "PARAMETER" $arg]
-	    puts "value : $value"
-	}
-	
-	if {$value != ""} {
-	    set value [xformat_addr_string $value $arg]
-
-	    if {[string compare -nocase $arg "IIC_PERSISTENT_BASEADDR"] == 0} {
-		set name "PERSISTENT_0_IIC_0_BASEADDR"
-	    } elseif {[string compare -nocase $arg "IIC_PERSISTENT_HIGHADDR"] == 0} {
-		set name "PERSISTENT_0_IIC_0_HIGHADDR"
-	    } elseif {[string compare -nocase $arg "IIC_PERSISTENT_EEPROMADDR"] == 0} {
-		set name "PERSISTENT_0_IIC_0_EEPROMADDR"
-	    } else {
-		set name [string toupper $arg]
-	    }
-	    set name [format "XPAR_%s" $name]
-	    puts $file_handle "#define $name $value"
-	}
-    }
-
-    puts $file_handle "\n/******************************************************************/\n"
-    close $file_handle
-}
-
-# uart redefines...
-proc xredefine_uartns550 {drvhandle file_name} {
-    
-    xredefine_include_file $drvhandle $file_name "uartns550" "C_BASEADDR" "C_HIGHADDR" "CLOCK_HZ" "DEVICE_ID"
-    
-}
-
-proc xredefine_emac {drvhandle file_name} {
-    
-    xredefine_include_file $drvhandle $file_name "emac" "C_BASEADDR" "C_HIGHADDR" "C_DMA_PRESENT" "C_MII_EXIST" "C_ERR_COUNT_EXIST" "DEVICE_ID"
-    
-}
-
-proc xredefine_iic {drvhandle file_name} {
-    xredefine_include_file $drvhandle $file_name "iic" "C_BASEADDR" "C_HIGHADDR" "C_TEN_BIT_ADR" "DEVICE_ID"
-
-}
-
-#######################
-
-proc xredefine_include_file {drv_handle file_name drv_string args} {
-    
-    # Open include file
-    set file_handle [xopen_include_file $file_name]
-    
-    # Get all peripherals connected to this driver
-    set periphs [xget_periphs $drv_handle] 
-    
-    set pname [format "XPAR_%s_" [string toupper $drv_string]]
-    
-    # Print all parameters for all peripherals
-    set device_id 0
-    set sub_periphs 1
-    foreach periph $periphs {
-	puts "$periph : $drv_string : $sub_periphs"
-
-	for {set i 0} {$i < $sub_periphs} {incr i} {
-	    foreach arg $args {
-		set name "${pname}${device_id}_"
-	    
-		if {[string compare -nocase "CLOCK_HZ" $arg] == 0} {
-		    set xdrv_string [format "%s%s" "X" $drv_string]
-		    set value [xget_dname $xdrv_string $arg]
-		    set name "${name}CLOCK_FREQ_HZ"
-		} else {
-		    if {[string match C_* $arg]} {
-			set name [format "%s%s" $name [string range $arg 2 end]]
-		    } else {
-			set name "${name}${arg}"
-		    }
-		    set value [xget_name $periph $arg]
-		}
-
-		if {[string compare -nocase "uartns550" $drv_string] == 0} {
-		    if {[string compare -nocase "C_BASEADDR" $arg] == 0} {
-			set value [format "(%s%s%s)" $value "+" "0x1000"]
-		    }
-		}
-
-		puts $file_handle "#define $name $value"
-		if {[string compare -nocase "DEVICE_ID" $arg] == 0} {
-		    incr device_id
-		}
-	    }
-	}
-    }		
-    puts $file_handle "\n/******************************************************************/\n"
-    close $file_handle
-}
-
-##################################################
-# procedure post_generate
-# This generates the drivers directory for uboot
-# and runs the ltypes script
-##################################################
-
-proc post_generate {lib_handle} {
-    
-    global drvlist
-    
-    # Create U-Boot tree structure
-    set pwd [pwd]
-    set common_dir "uboot/board/xilinx/common"
-    set xilinx_enet_dir "uboot/board/xilinx/xilinx_enet"
-    set ml300_dir  "uboot/board/xilinx/ml300"
-    
-    exec bash -c "mkdir -p $common_dir $xilinx_enet_dir $ml300_dir"
-    
-    # Copy files for xilinx_ocp
-    xcopy_commonfiles
-
-    foreach drv $drvlist {
-	set drvname [xget_value $drv "NAME"]
-	set ver [xget_value $drv "PARAMETER" "DRIVER_VER"]
-	set ver [string map {. _} $ver]
-	set dirname [format "%s_v%s" $drvname $ver]
-	
-	if {[string compare -nocase $drvname "emac"] == 0} {
-	    xcopy_emac $drv $dirname
-	} elseif {[string compare -nocase $drvname "iic"] == 0} {
-	    xcopy_iic $drv $dirname
-	}
-    }
-    
-    # Call Ltypes Script here
-    set uboot "uboot"
-    xltype_file $uboot
-
-    # Move xparameters.h around
-    exec bash -c "cp ../../include/xparameters.h $ml300_dir"
-
-    # copy the whole U-Boot BSP to its final destination
-    set value [xget_value $lib_handle "PARAMETER" TARGET_DIR]
-    puts "TARGET_DIR : $value"
-
-    if {$value != ""} {
-        if {[file isdirectory $value] == 0} {
-            exec bash -c "mkdir -p $value"
-        }
-        exec bash -c "cp -Rp uboot/* $value"
-    }
-}
-
-proc xcopy_commonfiles {} {
-
-    global drvlist
-
-    set common_dir "uboot/board/xilinx/common"
-    
-    foreach drv $drvlist {
-	set depends [xget_value $drv "OPTION" "DEPENDS"]
-	foreach dep $depends {
-	    puts "dep : $dep"
-	    if {[file isdirectory "../$dep"] == 1} {
-		exec bash -c "cp -f ../$dep/src/*.c $common_dir"
-		exec bash -c "cp -f ../$dep/src/*.h $common_dir"
-	    }
-	}
-    }
-    
-}
-
-proc xcopy_emac {drv_handle dirname} {
-    set emac "board/xilinx/xilinx_enet"
-    xcopy_dir $dirname $emac
-}
-
-proc xcopy_iic {drv_handle dirname} {
-    set iic "board/xilinx/xilinx_iic"
-    xcopy_dir $dirname $iic
-}
-
-proc xcopy_dir {srcdir dstdir} {
-    
-    set dstdirname [format "%s%s" "uboot/" $dstdir]
-    if {[file isdirectory "../$srcdir"] == 1} {
-	# Copy files from src to dst
-	exec bash -c "mkdir -p $dstdirname"
-	exec bash -c "cp -f ../$srcdir/src/*.c $dstdirname"
-	exec bash -c "cp -f ../$srcdir/src/*.h $dstdirname"
-    } else {
-	puts "$srcdir does not exist ..."
-    }
-}
-
-
-proc xltype_file {filename} {
-
-    global ltypes
-
-    puts $filename
-
-    if {[file isdirectory $filename]} {
-	foreach entry [glob -nocomplain [file join $filename *]] {
-	    xltype_file $entry
-	}
-    } else {
-	exec bash -c "$ltypes $filename"
-    }
-    
-}
diff --git a/board/xilinx/ml300/u-boot.lds b/board/xilinx/ml300/u-boot.lds
index 2d32225d4..913ff6ee7 100644
--- a/board/xilinx/ml300/u-boot.lds
+++ b/board/xilinx/ml300/u-boot.lds
@@ -64,14 +64,14 @@ SECTIONS
     cpu/ppc4xx/4xx_uart.o	(.text)
     cpu/ppc4xx/cpu_init.o	(.text)
     cpu/ppc4xx/speed.o	(.text)
-    cpu/ppc4xx/4xx_enet.o	(.text)
+    drivers/net/4xx_enet.o	(.text)
     common/dlmalloc.o	(.text)
     lib_generic/crc32.o		(.text)
     lib_ppc/extable.o	(.text)
     lib_generic/zlib.o		(.text)
 */
 /*    . = env_offset;*/
-/*    common/environment.o(.text)*/
+/*    common/env_embedded.o(.text)*/
 
     *(.text)
     *(.fixup)
@@ -142,6 +142,7 @@ SECTIONS
    *(.dynbss)
    *(.bss)
    *(COMMON)
+   . = ALIGN(4);
   }
   _end = . ;
   PROVIDE (end = .);
diff --git a/board/xilinx/ml300/u-boot.lds.debug b/board/xilinx/ml300/u-boot.lds.debug
index 0552994f4..338392a07 100644
--- a/board/xilinx/ml300/u-boot.lds.debug
+++ b/board/xilinx/ml300/u-boot.lds.debug
@@ -61,7 +61,7 @@ SECTIONS
     lib_generic/crc32.o		(.text)
     lib_ppc/extable.o	(.text)
 
-    common/environment.o(.text)
+    common/env_embedded.o(.text)
 
     *(.text)
     *(.fixup)
diff --git a/board/xilinx/ml401/ml401.c b/board/xilinx/ml401/ml401.c
index 955936d90..f388b775c 100644
--- a/board/xilinx/ml401/ml401.c
+++ b/board/xilinx/ml401/ml401.c
@@ -32,11 +32,11 @@
 
 void do_reset (void)
 {
-#ifdef CFG_GPIO_0
-	*((unsigned long *)(CFG_GPIO_0_ADDR)) =
-	    ++(*((unsigned long *)(CFG_GPIO_0_ADDR)));
+#ifdef CONFIG_SYS_GPIO_0
+	*((unsigned long *)(CONFIG_SYS_GPIO_0_ADDR)) =
+	    ++(*((unsigned long *)(CONFIG_SYS_GPIO_0_ADDR)));
 #endif
-#ifdef CFG_RESET_ADDRESS
+#ifdef CONFIG_SYS_RESET_ADDRESS
 	puts ("Reseting board\n");
 	asm ("bra r0");
 #endif
@@ -44,17 +44,17 @@ void do_reset (void)
 
 int gpio_init (void)
 {
-#ifdef CFG_GPIO_0
-	*((unsigned long *)(CFG_GPIO_0_ADDR)) = 0xFFFFFFFF;
+#ifdef CONFIG_SYS_GPIO_0
+	*((unsigned long *)(CONFIG_SYS_GPIO_0_ADDR)) = 0xFFFFFFFF;
 #endif
 	return 0;
 }
 
-#ifdef CFG_FSL_2
+#ifdef CONFIG_SYS_FSL_2
 void fsl_isr2 (void *arg) {
 	volatile int num;
-	*((unsigned int *)(CFG_GPIO_0_ADDR + 0x4)) =
-	    ++(*((unsigned int *)(CFG_GPIO_0_ADDR + 0x4)));
+	*((unsigned int *)(CONFIG_SYS_GPIO_0_ADDR + 0x4)) =
+	    ++(*((unsigned int *)(CONFIG_SYS_GPIO_0_ADDR + 0x4)));
 	GET (num, 2);
 	NGET (num, 2);
 	puts("*");
diff --git a/board/xilinx/ml401/u-boot.lds b/board/xilinx/ml401/u-boot.lds
index cb90854a3..b38f64877 100644
--- a/board/xilinx/ml401/u-boot.lds
+++ b/board/xilinx/ml401/u-boot.lds
@@ -61,6 +61,7 @@ SECTIONS
 	{
 		__bss_start = .;
 		*(.bss)
+		. = ALIGN(4);
 		__bss_end = .;
 	}
 	__end = . ;
diff --git a/board/xilinx/ml507/.gitignore b/board/xilinx/ml507/.gitignore
new file mode 100644
index 000000000..f6418a0c5
--- /dev/null
+++ b/board/xilinx/ml507/.gitignore
@@ -0,0 +1 @@
+/config.tmp
diff --git a/board/xilinx/ml507/Makefile b/board/xilinx/ml507/Makefile
index 72837048a..de23f296c 100644
--- a/board/xilinx/ml507/Makefile
+++ b/board/xilinx/ml507/Makefile
@@ -1,6 +1,7 @@
 #
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+# (C) Copyright 2008
+# Ricardo Ribalda,Universidad Autonoma de Madrid, ricardo.ribalda@uam.es
+# This work has been supported by: Qtechnology http://qtec.com/
 #
 # See file CREDITS for list of people who contributed to this
 # project.
@@ -21,38 +22,6 @@
 # MA 02111-1307 USA
 #
 
-include $(TOPDIR)/config.mk
-ifneq ($(OBJTREE),$(SRCTREE))
-endif
+COBJS	+= $(BOARD).o
 
-INCS		:=
-CFLAGS		+= $(INCS)
-HOST_CFLAGS	+= $(INCS)
-
-LIB	= $(obj)lib$(BOARD).a
-
-COBJS	= $(BOARD).o
-
-SOBJS	= init.o
-
-SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS	:= $(addprefix $(obj),$(COBJS))
-SOBJS	:= $(addprefix $(obj),$(SOBJS))
-
-$(LIB):	$(OBJS) $(SOBJS)
-	$(AR) $(ARFLAGS) $@ $^
-
-clean:
-	rm -f $(SOBJS) $(OBJS)
-
-distclean:	clean
-	rm -f $(LIB) core *.bak .depend
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
+include $(SRCTREE)/board/xilinx/ppc440-generic/Makefile
diff --git a/board/xilinx/ml507/config.mk b/board/xilinx/ml507/config.mk
index e827e8a93..51448ce7f 100644
--- a/board/xilinx/ml507/config.mk
+++ b/board/xilinx/ml507/config.mk
@@ -1,6 +1,7 @@
 #
-# (C) Copyright 2000
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+# (C) Copyright 2008
+# Ricardo Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@uam.es
+# Work supported by Qtechnology http://www.qtec.com
 #
 # See file CREDITS for list of people who contributed to this
 # project.
@@ -20,8 +21,6 @@
 # Foundation, Inc., 59 Temple Place, Suite 330, Boston,
 # MA 02111-1307 USA
 #
-sinclude $(OBJTREE)/board/$(BOARDDIR)/config.tmp
+#
 
-ifndef TEXT_BASE
-TEXT_BASE = 0x04000000
-endif
+sinclude $(SRCTREE)/board/xilinx/ppc440-generic/config.mk
diff --git a/board/xilinx/ml507/init.S b/board/xilinx/ml507/init.S
deleted file mode 100644
index 3228a65e5..000000000
--- a/board/xilinx/ml507/init.S
+++ /dev/null
@@ -1,53 +0,0 @@
-/*
- *  (C) Copyright 2008
- *  Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@uam.es
- *  This work has been supported by: QTechnology  http://qtec.com/
- *
- *  This program is free software: you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation, either version 2 of the License, or
- *  (at your option) any later version.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License
- *  along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#include <ppc_asm.tmpl>
-#include <config.h>
-#include <asm-ppc/mmu.h>
-
-.section .bootpg,"ax"
-.globl tlbtab
-
-tlbtab:
-tlbtab_start
-	/* SDRAM */
-tlbentry(XPAR_DDR2_SDRAM_MEM_BASEADDR, SZ_256M, CFG_SDRAM_BASE, 0,
-	 AC_R | AC_W | AC_X | SA_G | SA_I)
-	/* UART */
-tlbentry(XPAR_UARTLITE_0_BASEADDR, SZ_64K, XPAR_UARTLITE_0_BASEADDR, 0,
-	 AC_R | AC_W | SA_G | SA_I)
-	/* PIC */
-tlbentry(XPAR_INTC_0_BASEADDR, SZ_64K, XPAR_INTC_0_BASEADDR, 0,
-	 AC_R | AC_W | SA_G | SA_I)
-#ifdef XPAR_IIC_EEPROM_BASEADDR
-	/* I2C */
-tlbentry(XPAR_IIC_EEPROM_BASEADDR, SZ_64K, XPAR_IIC_EEPROM_BASEADDR, 0,
-	 AC_R | AC_W | SA_G | SA_I)
-#endif
-#ifdef XPAR_LLTEMAC_0_BASEADDR
-	/* Net */
-tlbentry(XPAR_LLTEMAC_0_BASEADDR, SZ_64K, XPAR_LLTEMAC_0_BASEADDR, 0,
-	 AC_R | AC_W | SA_G | SA_I)
-#endif
-#ifdef XPAR_FLASH_MEM0_BASEADDR
-	/*Flash*/
-tlbentry(XPAR_FLASH_MEM0_BASEADDR, SZ_256M, XPAR_FLASH_MEM0_BASEADDR, 0,
-	 AC_R | AC_W | AC_X | SA_G | SA_I)
-#endif
-tlbtab_end
diff --git a/board/xilinx/ml507/ml507.c b/board/xilinx/ml507/ml507.c
index d4993039e..f9789cf0f 100644
--- a/board/xilinx/ml507/ml507.c
+++ b/board/xilinx/ml507/ml507.c
@@ -20,28 +20,9 @@
 #include <common.h>
 #include <asm/processor.h>
 
-int board_pre_init(void)
-{
-	return 0;
-}
 
 int checkboard(void)
 {
-	puts("ML507 Board\n");
+	puts("Xilinx ML507 Board\n");
 	return 0;
 }
-
-phys_size_t initdram(int board_type)
-{
-	return get_ram_size(XPAR_DDR2_SDRAM_MEM_BASEADDR,
-			    CFG_SDRAM_SIZE_MB * 1024 * 1024);
-}
-
-void get_sys_info(sys_info_t * sysInfo)
-{
-	sysInfo->freqProcessor = XPAR_CORE_CLOCK_FREQ_HZ;
-	sysInfo->freqPLB = XPAR_PLB_CLOCK_FREQ_HZ;
-	sysInfo->freqPCI = 0;
-
-	return;
-}
diff --git a/board/xilinx/ml507/xparameters.h b/board/xilinx/ml507/xparameters.h
index 77d2ddf9b..1992fff22 100644
--- a/board/xilinx/ml507/xparameters.h
+++ b/board/xilinx/ml507/xparameters.h
@@ -21,15 +21,14 @@
 #ifndef XPARAMETER_H
 #define XPARAMETER_H
 
-#define XPAR_DDR2_SDRAM_MEM_BASEADDR 	0x00000000
-#define XPAR_IIC_EEPROM_BASEADDR 	0x81600000
-#define XPAR_INTC_0_BASEADDR 		0x81800000
-#define XPAR_LLTEMAC_0_BASEADDR 	0x81C00000
-#define XPAR_UARTLITE_0_BASEADDR 	0x84000000
-#define XPAR_FLASH_MEM0_BASEADDR 	0xFE000000
-#define XPAR_PLB_CLOCK_FREQ_HZ 		100000000
-#define XPAR_CORE_CLOCK_FREQ_HZ 	400000000
-#define XPAR_INTC_MAX_NUM_INTR_INPUTS 	13
+#define XPAR_DDR2_SDRAM_MEM_BASEADDR	0x00000000
+#define XPAR_IIC_EEPROM_BASEADDR	0x81600000
+#define XPAR_INTC_0_BASEADDR		0x81800000
+#define XPAR_UARTLITE_0_BASEADDR	0x84000000
+#define XPAR_FLASH_MEM0_BASEADDR	0xFE000000
+#define XPAR_PLB_CLOCK_FREQ_HZ		100000000
+#define XPAR_CORE_CLOCK_FREQ_HZ		400000000
+#define XPAR_INTC_MAX_NUM_INTR_INPUTS	13
 #define XPAR_UARTLITE_0_BAUDRATE	9600
 
 #endif
diff --git a/board/xilinx/ppc405-generic/.gitignore b/board/xilinx/ppc405-generic/.gitignore
new file mode 100644
index 000000000..b644f5994
--- /dev/null
+++ b/board/xilinx/ppc405-generic/.gitignore
@@ -0,0 +1 @@
+config.tmp
diff --git a/board/xilinx/ppc405-generic/Makefile b/board/xilinx/ppc405-generic/Makefile
new file mode 100644
index 000000000..b56bb490a
--- /dev/null
+++ b/board/xilinx/ppc405-generic/Makefile
@@ -0,0 +1,60 @@
+#
+# (C) Copyright 2000-2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# (C) Copyright 2008
+# Ricardo Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@uam.es
+# Work supported by Qtechnology http://www.qtec.com
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+ifneq ($(OBJTREE),$(SRCTREE))
+endif
+
+INCS		:=
+CFLAGS		+= $(INCS)
+HOST_CFLAGS	+= $(INCS)
+
+LIB	= $(obj)lib$(BOARD).a
+
+COBJS	+= ../../xilinx/ppc405-generic/xilinx_ppc405_generic.o
+
+SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS	:= $(addprefix $(obj),$(COBJS))
+SOBJS	:= $(addprefix $(obj),$(SOBJS))
+
+$(LIB):	$(OBJS) $(SOBJS)
+	$(AR) $(ARFLAGS) $@ $^
+
+clean:
+	rm -f $(SOBJS) $(OBJS)
+
+distclean:	clean
+	rm -f $(LIB) core *.bak .depend
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/xilinx/ppc405-generic/config.mk b/board/xilinx/ppc405-generic/config.mk
new file mode 100644
index 000000000..6d767552d
--- /dev/null
+++ b/board/xilinx/ppc405-generic/config.mk
@@ -0,0 +1,25 @@
+#
+# (C) Copyright 2008
+# Ricardo Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@uam.es
+# Work supported by Qtechnology http://www.qtec.com
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+sinclude $(OBJTREE)/board/$(BOARDDIR)/config.tmp
diff --git a/board/xilinx/ml507/u-boot-ram.lds b/board/xilinx/ppc405-generic/u-boot-ram.lds
index 2c98d2785..6bbd3bd47 100644
--- a/board/xilinx/ml507/u-boot-ram.lds
+++ b/board/xilinx/ppc405-generic/u-boot-ram.lds
@@ -22,7 +22,7 @@
  */
 
 OUTPUT_ARCH(powerpc)
-ENTRY(_start_440)
+ENTRY(_start)
 
 SECTIONS
 {
@@ -127,7 +127,7 @@ SECTIONS
    *(COMMON)
   }
 
-  ppcenv_assert = ASSERT(. < 0xFFFFB000, ".bss section too big, overlaps .ppcenv section. Please update your confguration: CFG_MONITOR_BASE, CFG_MONITOR_LEN and TEXT_BASE may need to be modified.");
+  ppcenv_assert = ASSERT(. < 0xFFFFB000, ".bss section too big, overlaps .ppcenv section. Please update your configuration: CONFIG_SYS_MONITOR_BASE, CONFIG_SYS_MONITOR_LEN and TEXT_BASE may need to be modified.");
 
   _end = . ;
   PROVIDE (end = .);
diff --git a/board/xilinx/ml507/u-boot-rom.lds b/board/xilinx/ppc405-generic/u-boot-rom.lds
index d5da018ba..d09400655 100644
--- a/board/xilinx/ml507/u-boot-rom.lds
+++ b/board/xilinx/ppc405-generic/u-boot-rom.lds
@@ -22,7 +22,7 @@
  */
 
 OUTPUT_ARCH(powerpc)
-ENTRY(_start_440)
+ENTRY(_start)
 
 SECTIONS
 {
@@ -137,7 +137,7 @@ SECTIONS
    *(COMMON)
   }
 
-  ppcenv_assert = ASSERT(. < 0xFFFFB000, ".bss section too big, overlaps .ppcenv section. Please update your confguration: CFG_MONITOR_BASE, CFG_MONITOR_LEN and TEXT_BASE may need to be modified.");
+  ppcenv_assert = ASSERT(. < 0xFFFFB000, ".bss section too big, overlaps .ppcenv section. Please update your configuration: CONFIG_SYS_MONITOR_BASE, CONFIG_SYS_MONITOR_LEN and TEXT_BASE may need to be modified.");
 
   _end = . ;
   PROVIDE (end = .);
diff --git a/board/xilinx/ppc405-generic/xilinx_ppc405_generic.c b/board/xilinx/ppc405-generic/xilinx_ppc405_generic.c
new file mode 100644
index 000000000..9bd1770eb
--- /dev/null
+++ b/board/xilinx/ppc405-generic/xilinx_ppc405_generic.c
@@ -0,0 +1,59 @@
+/*
+ * (C) Copyright 2008
+ * Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@uam.es
+ * This work has been supported by: QTechnology  http://qtec.com/
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include <config.h>
+#include <common.h>
+#include <asm/processor.h>
+
+ulong __get_PCI_freq(void)
+{
+	return 0;
+}
+
+ulong get_PCI_freq(void) __attribute__((weak, alias("__get_PCI_freq")));
+
+int __board_pre_init(void)
+{
+	return 0;
+}
+int board_pre_init(void) __attribute__((weak, alias("__board_pre_init")));
+
+int __checkboard(void)
+{
+	puts("Xilinx PPC405 Generic Board\n");
+	return 0;
+}
+int checkboard(void) __attribute__((weak, alias("__checkboard")));
+
+phys_size_t __initdram(int board_type)
+{
+	return get_ram_size(XPAR_DDR2_SDRAM_MEM_BASEADDR,
+			    CONFIG_SYS_SDRAM_SIZE_MB * 1024 * 1024);
+}
+phys_size_t initdram(int) __attribute__((weak, alias("__initdram")));
+
+void __get_sys_info(sys_info_t *sysInfo)
+{
+	sysInfo->freqProcessor = XPAR_CORE_CLOCK_FREQ_HZ;
+	sysInfo->freqPLB = XPAR_PLB_CLOCK_FREQ_HZ;
+	sysInfo->freqPCI = 0;
+
+	return;
+}
+void get_sys_info(sys_info_t *) __attribute__((weak, alias("__get_sys_info")));
diff --git a/board/xilinx/ppc405-generic/xparameters.h b/board/xilinx/ppc405-generic/xparameters.h
new file mode 100644
index 000000000..e8e8ced09
--- /dev/null
+++ b/board/xilinx/ppc405-generic/xparameters.h
@@ -0,0 +1,36 @@
+/*
+ * (C) Copyright 2008
+ * Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@uam.es
+ * This work has been supported by: QTechnology  http://qtec.com/
+ * based on xparameters-ml507.h by Xilinx
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef XPARAMETER_H
+#define XPARAMETER_H
+
+#define XPAR_DDR2_SDRAM_MEM_BASEADDR	0x00000000
+#define XPAR_IIC_EEPROM_BASEADDR	0x81600000
+#define XPAR_INTC_0_BASEADDR		0x81800000
+#define XPAR_SPI_0_BASEADDR             0x83400000
+#define XPAR_UARTLITE_0_BASEADDR	0x84000000
+#define XPAR_FLASH_MEM0_BASEADDR	0xFE000000
+#define XPAR_PLB_CLOCK_FREQ_HZ		100000000
+#define XPAR_CORE_CLOCK_FREQ_HZ		400000000
+#define XPAR_INTC_MAX_NUM_INTR_INPUTS	13
+#define XPAR_UARTLITE_0_BAUDRATE	9600
+#define XPAR_SPI_0_NUM_TRANSFER_BITS	8
+
+#endif
diff --git a/board/xilinx/ppc440-generic/.gitignore b/board/xilinx/ppc440-generic/.gitignore
new file mode 100644
index 000000000..f6418a0c5
--- /dev/null
+++ b/board/xilinx/ppc440-generic/.gitignore
@@ -0,0 +1 @@
+/config.tmp
diff --git a/board/xilinx/ppc440-generic/Makefile b/board/xilinx/ppc440-generic/Makefile
new file mode 100644
index 000000000..bf0a6ba4f
--- /dev/null
+++ b/board/xilinx/ppc440-generic/Makefile
@@ -0,0 +1,62 @@
+#
+# (C) Copyright 2000-2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# (C) Copyright 2008
+# Ricardo Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@uam.es
+# Work supported by Qtechnology http://www.qtec.com
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+ifneq ($(OBJTREE),$(SRCTREE))
+endif
+
+INCS		:=
+CFLAGS		+= $(INCS)
+HOST_CFLAGS	+= $(INCS)
+
+LIB	= $(obj)lib$(BOARD).a
+
+COBJS	+= ../../xilinx/ppc440-generic/xilinx_ppc440_generic.o
+
+SOBJS	+= ../../xilinx/ppc440-generic/init.o
+
+SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS	:= $(addprefix $(obj),$(COBJS))
+SOBJS	:= $(addprefix $(obj),$(SOBJS))
+
+$(LIB):	$(OBJS) $(SOBJS)
+	$(AR) $(ARFLAGS) $@ $^
+
+clean:
+	rm -f $(SOBJS) $(OBJS)
+
+distclean:	clean
+	rm -f $(LIB) core *.bak .depend
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/xilinx/ppc440-generic/config.mk b/board/xilinx/ppc440-generic/config.mk
new file mode 100644
index 000000000..6d767552d
--- /dev/null
+++ b/board/xilinx/ppc440-generic/config.mk
@@ -0,0 +1,25 @@
+#
+# (C) Copyright 2008
+# Ricardo Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@uam.es
+# Work supported by Qtechnology http://www.qtec.com
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+sinclude $(OBJTREE)/board/$(BOARDDIR)/config.tmp
diff --git a/board/xilinx/ppc440-generic/init.S b/board/xilinx/ppc440-generic/init.S
new file mode 100644
index 000000000..1409467ea
--- /dev/null
+++ b/board/xilinx/ppc440-generic/init.S
@@ -0,0 +1,45 @@
+/*
+ *  (C) Copyright 2008
+ *  Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@uam.es
+ *  This work has been supported by: QTechnology  http://qtec.com/
+ *
+ *  This program is free software: you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation, either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include <ppc_asm.tmpl>
+#include <config.h>
+#include <asm-ppc/mmu.h>
+
+.section .bootpg,"ax"
+.globl tlbtab
+
+tlbtab:
+tlbtab_start
+tlbentry(0x00000000, SZ_256M, 0x00000000, 0, AC_R | AC_W | AC_X | SA_G | SA_I)
+tlbentry(0x10000000, SZ_256M, 0x10000000, 0, AC_R | AC_W | AC_X | SA_G | SA_I)
+tlbentry(0x20000000, SZ_256M, 0x20000000, 0, AC_R | AC_W | AC_X | SA_G | SA_I)
+tlbentry(0x30000000, SZ_256M, 0x30000000, 0, AC_R | AC_W | AC_X | SA_G | SA_I)
+tlbentry(0x40000000, SZ_256M, 0x40000000, 0, AC_R | AC_W | AC_X | SA_G | SA_I)
+tlbentry(0x50000000, SZ_256M, 0x50000000, 0, AC_R | AC_W | AC_X | SA_G | SA_I)
+tlbentry(0x60000000, SZ_256M, 0x60000000, 0, AC_R | AC_W | AC_X | SA_G | SA_I)
+tlbentry(0x70000000, SZ_256M, 0x70000000, 0, AC_R | AC_W | AC_X | SA_G | SA_I)
+tlbentry(0x80000000, SZ_256M, 0x80000000, 0, AC_R | AC_W | AC_X | SA_G | SA_I)
+tlbentry(0x90000000, SZ_256M, 0x90000000, 0, AC_R | AC_W | AC_X | SA_G | SA_I)
+tlbentry(0xa0000000, SZ_256M, 0xa0000000, 0, AC_R | AC_W | AC_X | SA_G | SA_I)
+tlbentry(0xb0000000, SZ_256M, 0xb0000000, 0, AC_R | AC_W | AC_X | SA_G | SA_I)
+tlbentry(0xc0000000, SZ_256M, 0xc0000000, 0, AC_R | AC_W | AC_X | SA_G | SA_I)
+tlbentry(0xd0000000, SZ_256M, 0xd0000000, 0, AC_R | AC_W | AC_X | SA_G | SA_I)
+tlbentry(0xe0000000, SZ_256M, 0xe0000000, 0, AC_R | AC_W | AC_X | SA_G | SA_I)
+tlbentry(0xf0000000, SZ_256M, 0xf0000000, 0, AC_R | AC_W | AC_X | SA_G | SA_I)
+tlbtab_end
diff --git a/board/freescale/m5235evb/u-boot.lds b/board/xilinx/ppc440-generic/u-boot-ram.lds
index 33133a0fc..d65f3de67 100644
--- a/board/freescale/m5235evb/u-boot.lds
+++ b/board/xilinx/ppc440-generic/u-boot-ram.lds
@@ -1,5 +1,5 @@
 /*
- * (C) Copyright 2000
+ * (C) Copyright 2000-2004
  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
  *
  * See file CREDITS for list of people who contributed to this
@@ -21,9 +21,9 @@
  * MA 02111-1307 USA
  */
 
-OUTPUT_ARCH(m68k)
-/* Do we need any of these for elf?
-   __DYNAMIC = 0;    */
+OUTPUT_ARCH(powerpc)
+ENTRY(_start_440)
+
 SECTIONS
 {
   /* Read-only sections, merged into text segment: */
@@ -55,15 +55,6 @@ SECTIONS
     /* WARNING - the following is hand-optimized to fit within	*/
     /* the sector layout of our flash chips!	XXX FIXME XXX	*/
 
-    cpu/mcf523x/start.o		(.text)
-    cpu/mcf523x/cpu_init.o	(.text)
-    lib_m68k/traps.o		(.text)
-    lib_m68k/interrupts.o	(.text)
-    common/dlmalloc.o		(.text)
-    lib_generic/zlib.o		(.text)
-
-    . = DEFINED(env_offset) ? env_offset : .;
-    common/environment.o	(.text)
 
     *(.text)
     *(.fixup)
@@ -75,6 +66,8 @@ SECTIONS
   {
     *(.rodata)
     *(.rodata1)
+    *(.rodata.str1.4)
+    *(.eh_frame)
   }
   .fini      : { *(.fini)    } =0
   .ctors     : { *(.ctors)   }
@@ -84,12 +77,9 @@ SECTIONS
   . = (. + 0x00FF) & 0xFFFFFF00;
   _erotext = .;
   PROVIDE (erotext = .);
-
   .reloc   :
   {
-    __got_start = .;
     *(.got)
-    __got_end = .;
     _GOT2_TABLE_ = .;
     *(.got2)
     _FIXUP_TABLE_ = .;
@@ -131,14 +121,15 @@ SECTIONS
   __bss_start = .;
   .bss (NOLOAD)       :
   {
-   _sbss = .;
    *(.sbss) *(.scommon)
    *(.dynbss)
    *(.bss)
    *(COMMON)
    . = ALIGN(4);
-   _ebss = .;
   }
+
+  ppcenv_assert = ASSERT(. < 0xFFFFB000, ".bss section too big, overlaps .ppcenv section. Please update your confguration: CONFIG_SYS_MONITOR_BASE, CONFIG_SYS_MONITOR_LEN and TEXT_BASE may need to be modified.");
+
   _end = . ;
   PROVIDE (end = .);
 }
diff --git a/board/xilinx/ppc440-generic/u-boot-rom.lds b/board/xilinx/ppc440-generic/u-boot-rom.lds
new file mode 100644
index 000000000..8b468eee7
--- /dev/null
+++ b/board/xilinx/ppc440-generic/u-boot-rom.lds
@@ -0,0 +1,145 @@
+/*
+ * (C) Copyright 2000-2004
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(powerpc)
+ENTRY(_start_440)
+
+SECTIONS
+{
+  .resetvec 0xFFFFFFFC :
+  {
+    *(.resetvec)
+  } = 0xffff
+
+  .bootpg 0xFFFFF000 :
+  {
+    cpu/ppc4xx/start.o	(.bootpg)
+  } = 0xffff
+
+  /* Read-only sections, merged into text segment: */
+  . = + SIZEOF_HEADERS;
+  .interp : { *(.interp) }
+  .hash          : { *(.hash)		}
+  .dynsym        : { *(.dynsym)		}
+  .dynstr        : { *(.dynstr)		}
+  .rel.text      : { *(.rel.text)		}
+  .rela.text     : { *(.rela.text)	}
+  .rel.data      : { *(.rel.data)		}
+  .rela.data     : { *(.rela.data)	}
+  .rel.rodata    : { *(.rel.rodata)	}
+  .rela.rodata   : { *(.rela.rodata)	}
+  .rel.got       : { *(.rel.got)		}
+  .rela.got      : { *(.rela.got)		}
+  .rel.ctors     : { *(.rel.ctors)	}
+  .rela.ctors    : { *(.rela.ctors)	}
+  .rel.dtors     : { *(.rel.dtors)	}
+  .rela.dtors    : { *(.rela.dtors)	}
+  .rel.bss       : { *(.rel.bss)		}
+  .rela.bss      : { *(.rela.bss)		}
+  .rel.plt       : { *(.rel.plt)		}
+  .rela.plt      : { *(.rela.plt)		}
+  .init          : { *(.init)	}
+  .plt : { *(.plt) }
+  .text      :
+  {
+    /* WARNING - the following is hand-optimized to fit within	*/
+    /* the sector layout of our flash chips!	XXX FIXME XXX	*/
+
+
+    *(.text)
+    *(.fixup)
+    *(.got1)
+  }
+  _etext = .;
+  PROVIDE (etext = .);
+  .rodata    :
+  {
+    *(.rodata)
+    *(.rodata1)
+    *(.rodata.str1.4)
+    *(.eh_frame)
+  }
+  .fini      : { *(.fini)    } =0
+  .ctors     : { *(.ctors)   }
+  .dtors     : { *(.dtors)   }
+
+  /* Read-write section, merged into data segment: */
+  . = (. + 0x00FF) & 0xFFFFFF00;
+  _erotext = .;
+  PROVIDE (erotext = .);
+  .reloc   :
+  {
+    *(.got)
+    _GOT2_TABLE_ = .;
+    *(.got2)
+    _FIXUP_TABLE_ = .;
+    *(.fixup)
+  }
+  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
+  __fixup_entries = (. - _FIXUP_TABLE_)>>2;
+
+  .data    :
+  {
+    *(.data)
+    *(.data1)
+    *(.sdata)
+    *(.sdata2)
+    *(.dynamic)
+    CONSTRUCTORS
+  }
+  _edata  =  .;
+  PROVIDE (edata = .);
+
+  . = .;
+  __u_boot_cmd_start = .;
+  .u_boot_cmd : { *(.u_boot_cmd) }
+  __u_boot_cmd_end = .;
+
+
+  . = .;
+  __start___ex_table = .;
+  __ex_table : { *(__ex_table) }
+  __stop___ex_table = .;
+
+  . = ALIGN(256);
+  __init_begin = .;
+  .text.init : { *(.text.init) }
+  .data.init : { *(.data.init) }
+  . = ALIGN(256);
+  __init_end = .;
+
+  __bss_start = .;
+  .bss (NOLOAD)       :
+  {
+   *(.sbss) *(.scommon)
+   *(.dynbss)
+   *(.bss)
+   *(COMMON)
+   . = ALIGN(4);
+  }
+
+  ppcenv_assert = ASSERT(. < 0xFFFFB000, ".bss section too big, overlaps .ppcenv section. Please update your confguration: CONFIG_SYS_MONITOR_BASE, CONFIG_SYS_MONITOR_LEN and TEXT_BASE may need to be modified.");
+
+  _end = . ;
+  PROVIDE (end = .);
+}
diff --git a/board/xilinx/ppc440-generic/xilinx_ppc440_generic.c b/board/xilinx/ppc440-generic/xilinx_ppc440_generic.c
new file mode 100644
index 000000000..0c3d667c5
--- /dev/null
+++ b/board/xilinx/ppc440-generic/xilinx_ppc440_generic.c
@@ -0,0 +1,52 @@
+/*
+ * (C) Copyright 2008
+ * Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@uam.es
+ * This work has been supported by: QTechnology  http://qtec.com/
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include <config.h>
+#include <common.h>
+#include <asm/processor.h>
+
+int __board_pre_init(void)
+{
+	return 0;
+}
+int board_pre_init(void) __attribute__((weak, alias("__board_pre_init")));
+
+int __checkboard(void)
+{
+	puts("Xilinx PPC440 Generic Board\n");
+	return 0;
+}
+int checkboard(void) __attribute__((weak, alias("__checkboard")));
+
+phys_size_t __initdram(int board_type)
+{
+	return get_ram_size(XPAR_DDR2_SDRAM_MEM_BASEADDR,
+			    CONFIG_SYS_SDRAM_SIZE_MB * 1024 * 1024);
+}
+phys_size_t initdram(int) __attribute__((weak, alias("__initdram")));
+
+void __get_sys_info(sys_info_t *sysInfo)
+{
+	sysInfo->freqProcessor = XPAR_CORE_CLOCK_FREQ_HZ;
+	sysInfo->freqPLB = XPAR_PLB_CLOCK_FREQ_HZ;
+	sysInfo->freqPCI = 0;
+
+	return;
+}
+void get_sys_info(sys_info_t *) __attribute__((weak, alias("__get_sys_info")));
diff --git a/board/xilinx/ppc440-generic/xparameters.h b/board/xilinx/ppc440-generic/xparameters.h
new file mode 100644
index 000000000..1992fff22
--- /dev/null
+++ b/board/xilinx/ppc440-generic/xparameters.h
@@ -0,0 +1,34 @@
+/*
+ * (C) Copyright 2008
+ * Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@uam.es
+ * This work has been supported by: QTechnology  http://qtec.com/
+ * based on xparameters-ml507.h by Xilinx
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef XPARAMETER_H
+#define XPARAMETER_H
+
+#define XPAR_DDR2_SDRAM_MEM_BASEADDR	0x00000000
+#define XPAR_IIC_EEPROM_BASEADDR	0x81600000
+#define XPAR_INTC_0_BASEADDR		0x81800000
+#define XPAR_UARTLITE_0_BASEADDR	0x84000000
+#define XPAR_FLASH_MEM0_BASEADDR	0xFE000000
+#define XPAR_PLB_CLOCK_FREQ_HZ		100000000
+#define XPAR_CORE_CLOCK_FREQ_HZ		400000000
+#define XPAR_INTC_MAX_NUM_INTR_INPUTS	13
+#define XPAR_UARTLITE_0_BAUDRATE	9600
+
+#endif
diff --git a/board/xilinx/xilinx_enet/emac_adapter.c b/board/xilinx/xilinx_enet/emac_adapter.c
index d3403038e..0b100d215 100644
--- a/board/xilinx/xilinx_enet/emac_adapter.c
+++ b/board/xilinx/xilinx_enet/emac_adapter.c
@@ -56,7 +56,7 @@ static XEmac Emac;
 static char etherrxbuff[PKTSIZE_ALIGN];	/* Receive buffer */
 
 /* hardcoded MAC address for the Xilinx EMAC Core when env is nowhere*/
-#ifdef CFG_ENV_IS_NOWHERE
+#ifdef CONFIG_ENV_IS_NOWHERE
 static u8 EMACAddr[ENET_ADDR_LENGTH] = { 0x00, 0x0a, 0x35, 0x00, 0x22, 0x01 };
 #endif
 
@@ -87,7 +87,7 @@ eth_init(bd_t * bis)
 	/* make sure the Emac is stopped before it is started */
 	(void) XEmac_Stop(&Emac);
 
-#ifdef CFG_ENV_IS_NOWHERE
+#ifdef CONFIG_ENV_IS_NOWHERE
 	memcpy(bis->bi_enetaddr, EMACAddr, 6);
 #endif
 
diff --git a/board/xilinx/xilinx_iic/iic_adapter.c b/board/xilinx/xilinx_iic/iic_adapter.c
index 37dce0391..58aaeb769 100644
--- a/board/xilinx/xilinx_iic/iic_adapter.c
+++ b/board/xilinx/xilinx_iic/iic_adapter.c
@@ -42,7 +42,7 @@
 #include <environment.h>
 #include <net.h>
 
-#ifdef CFG_ENV_IS_IN_EEPROM
+#ifdef CONFIG_ENV_IS_IN_EEPROM
 #include <i2c.h>
 #include "xiic_l.h"
 
@@ -72,7 +72,7 @@ send(u32 adr, u8 * data, u32 len)
 		memcpy(&sendBuf[2], &data[pos], wlen);
 
 		/* Send to EEPROM through iic bus */
-		ret = XIic_Send(XPAR_IIC_0_BASEADDR, CFG_I2C_EEPROM_ADDR >> 1,
+		ret = XIic_Send(XPAR_IIC_0_BASEADDR, CONFIG_SYS_I2C_EEPROM_ADDR >> 1,
 				sendBuf, wlen + 2);
 
 		udelay(IIC_DELAY);
@@ -93,11 +93,11 @@ receive(u32 adr, u8 * data, u32 len)
 
 	/* Provide EEPROM address */
 	ret =
-	    XIic_Send(XPAR_IIC_0_BASEADDR, CFG_I2C_EEPROM_ADDR >> 1, address,
+	    XIic_Send(XPAR_IIC_0_BASEADDR, CONFIG_SYS_I2C_EEPROM_ADDR >> 1, address,
 		      2);
 	/* Receive data from EEPROM */
 	ret =
-	    XIic_Recv(XPAR_IIC_0_BASEADDR, CFG_I2C_EEPROM_ADDR >> 1, data, len);
+	    XIic_Recv(XPAR_IIC_0_BASEADDR, CONFIG_SYS_I2C_EEPROM_ADDR >> 1, data, len);
 }
 
 /************************************************************************
@@ -221,7 +221,7 @@ read_crc(uchar * buffer, int len)
 	u8 pre;			/* previous EEPROM data bit */
 	int i, loc;
 
-	addr = CFG_ENV_OFFSET;	/* start from first env address */
+	addr = CONFIG_ENV_OFFSET;	/* start from first env address */
 	n = 0;
 	pre = 1;
 	stop = 1;
@@ -229,7 +229,7 @@ read_crc(uchar * buffer, int len)
 
 	/* calculate runtime CRC according to ML300 and read back
 	   old CRC stored in the EEPROM */
-	while (n < CFG_ENV_SIZE) {
+	while (n < CONFIG_ENV_SIZE) {
 		receive(addr, buffer, len);
 
 		/* found two null chars, end of env */
@@ -270,7 +270,7 @@ read_crc(uchar * buffer, int len)
 		crc = 0;
 		n = 0;
 		addr =
-		    CFG_ENV_OFFSET - offsetof(env_t, crc) + offsetof(env_t,
+		    CONFIG_ENV_OFFSET - offsetof(env_t, crc) + offsetof(env_t,
 								     data);
 		/* calculate u-boot crc */
 		while (n < ENV_SIZE) {
@@ -464,7 +464,7 @@ save_env(void)
 
 	/* update EEPROM env values if there is enough space */
 	if (update_crc(len, (uchar *)eprom) == 0)
-		send(CFG_ENV_OFFSET, (uchar *)eprom, len + 6);
+		send(CONFIG_ENV_OFFSET, (uchar *)eprom, len + 6);
 }
 
 /************************************************************************
@@ -483,7 +483,7 @@ i2c_read(uchar chip, uint addr, int alen, uchar * buffer, int len)
 		/* then read out EEPROM content for runtime u-boot CRC calculation */
 		receive(addr, buffer, len);
 
-		if (addr + len - CFG_ENV_OFFSET == CFG_ENV_SIZE)
+		if (addr + len - CONFIG_ENV_OFFSET == CONFIG_ENV_SIZE)
 			/* end of runtime crc read */
 			++envStep;
 		return 0;
@@ -492,7 +492,7 @@ i2c_read(uchar chip, uint addr, int alen, uchar * buffer, int len)
 	if (len < 2) {
 		/* when call getenv_r */
 		receive(addr, buffer, len);
-	} else if (addr + len < CFG_ENV_OFFSET + CFG_ENV_SIZE) {
+	} else if (addr + len < CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE) {
 		/* calling env_relocate(), but don't read out
 		   crc value from EEPROM */
 		receive(addr, buffer + 4, len);
@@ -511,7 +511,7 @@ int
 i2c_write(uchar chip, uint addr, int alen, uchar * buffer, int len)
 {
 	/* save env on last page write called by u-boot */
-	if (addr + len >= CFG_ENV_OFFSET + CFG_ENV_SIZE)
+	if (addr + len >= CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)
 		save_env();
 
 	return 0;
diff --git a/board/xilinx/xupv2p/xparameters.h b/board/xilinx/xupv2p/xparameters.h
deleted file mode 100644
index 9e5ebdabc..000000000
--- a/board/xilinx/xupv2p/xparameters.h
+++ /dev/null
@@ -1,58 +0,0 @@
-/*
- * (C) Copyright 2007 Michal Simek
- *
- * Michal  SIMEK <monstr@monstr.eu>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
- * CAUTION: This file is automatically generated by libgen.
- * Version: Xilinx EDK 8.2.02 EDK_Im_Sp2.4
- */
-
-/* System Clock Frequency */
-#define XILINX_CLOCK_FREQ	100000000
-
-/* Interrupt controller is opb_intc_0 */
-#define XILINX_INTC_BASEADDR	0x41200000
-#define XILINX_INTC_NUM_INTR_INPUTS	11
-
-/* Timer pheriphery is opb_timer_1 */
-#define XILINX_TIMER_BASEADDR	0x41c00000
-#define XILINX_TIMER_IRQ	1
-
-/* Uart pheriphery is RS232_Uart_1 */
-#define XILINX_UARTLITE_BASEADDR	0x40600000
-#define XILINX_UARTLITE_BAUDRATE	115200
-
-/* GPIO is LEDs_4Bit*/
-#define XILINX_GPIO_BASEADDR	0x40000000
-
-/* FLASH doesn't exist none */
-
-/* Main Memory is DDR_256MB_32MX64_rank1_row13_col10_cl2_5 */
-#define XILINX_RAM_START	0x30000000
-#define XILINX_RAM_SIZE	0x10000000
-
-/* Sysace Controller is SysACE_CompactFlash */
-#define XILINX_SYSACE_BASEADDR	0x41800000
-#define XILINX_SYSACE_HIGHADDR	0x4180ffff
-#define XILINX_SYSACE_MEM_WIDTH	16
-
-/* Ethernet controller is Ethernet_MAC */
-#define XILINX_EMACLITE_BASEADDR       0x40C00000
diff --git a/board/xm250/flash.c b/board/xm250/flash.c
index aab47a0a5..b02149cd6 100644
--- a/board/xm250/flash.c
+++ b/board/xm250/flash.c
@@ -28,7 +28,7 @@
 #include <linux/byteorder/swab.h>
 
 
-flash_info_t flash_info[CFG_MAX_FLASH_BANKS];	/* info for FLASH chips    */
+flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];	/* info for FLASH chips    */
 
 /* Board support for 1 or 2 flash devices */
 #define FLASH_PORT_WIDTH32
@@ -84,7 +84,7 @@ unsigned long flash_init (void)
 	int i;
 	ulong size = 0;
 
-	for (i = 0; i < CFG_MAX_FLASH_BANKS; i++) {
+	for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) {
 		switch (i) {
 		case 0:
 			flash_get_size ((FPW *) PHYS_FLASH_1, &flash_info[i]);
@@ -104,13 +104,13 @@ unsigned long flash_init (void)
 	/* Protect monitor and environment sectors
 	 */
 	flash_protect ( FLAG_PROTECT_SET,
-			CFG_FLASH_BASE,
-			CFG_FLASH_BASE + monitor_flash_len - 1,
+			CONFIG_SYS_FLASH_BASE,
+			CONFIG_SYS_FLASH_BASE + monitor_flash_len - 1,
 			&flash_info[0] );
 
 	flash_protect ( FLAG_PROTECT_SET,
-			CFG_ENV_ADDR,
-			CFG_ENV_ADDR + CFG_ENV_SIZE - 1, &flash_info[0] );
+			CONFIG_ENV_ADDR,
+			CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1, &flash_info[0] );
 
 	return size;
 }
@@ -232,10 +232,10 @@ static ulong flash_get_size (FPW *addr, flash_info_t *info)
 		break;
 	}
 
-	if (info->sector_count > CFG_MAX_FLASH_SECT) {
+	if (info->sector_count > CONFIG_SYS_MAX_FLASH_SECT) {
 		printf ("** ERROR: sector count %d > max (%d) **\n",
-			info->sector_count, CFG_MAX_FLASH_SECT);
-		info->sector_count = CFG_MAX_FLASH_SECT;
+			info->sector_count, CONFIG_SYS_MAX_FLASH_SECT);
+		info->sector_count = CONFIG_SYS_MAX_FLASH_SECT;
 	}
 
 	addr[0] = (FPW) 0x00FF00FF;		/* restore read mode */
@@ -305,7 +305,7 @@ int flash_erase (flash_info_t *info, int s_first, int s_last)
 			*addr = (FPW) 0x00D000D0;	/* erase confirm */
 
 			while (((status = *addr) & (FPW) 0x00800080) != (FPW) 0x00800080) {
-				if (get_timer_masked () > CFG_FLASH_ERASE_TOUT) {
+				if (get_timer_masked () > CONFIG_SYS_FLASH_ERASE_TOUT) {
 					printf ("Timeout\n");
 					*addr = (FPW) 0x00B000B0;	/* suspend erase     */
 					*addr = (FPW) 0x00FF00FF;	/* reset to read mode */
@@ -439,7 +439,7 @@ static int write_data (flash_info_t *info, ulong dest, FPW data)
 
 	/* wait while polling the status register */
 	while (((status = *addr) & (FPW) 0x00800080) != (FPW) 0x00800080) {
-		if (get_timer_masked () > CFG_FLASH_WRITE_TOUT) {
+		if (get_timer_masked () > CONFIG_SYS_FLASH_WRITE_TOUT) {
 			*addr = (FPW) 0x00FF00FF;	/* restore read mode */
 			return (1);
 		}
@@ -484,7 +484,7 @@ int flash_real_protect(flash_info_t *info, long sector, int prot)
 	reset_timer_masked ();
 
 	while ((*addr & INTEL_FINISHED) != INTEL_FINISHED) {
-		if (get_timer_masked () > CFG_FLASH_UNLOCK_TOUT) {
+		if (get_timer_masked () > CONFIG_SYS_FLASH_UNLOCK_TOUT) {
 			printf("Flash lock bit operation timed out\n");
 			rc = 1;
 			break;
@@ -516,7 +516,7 @@ int flash_real_protect(flash_info_t *info, long sector, int prot)
 				*addr = INTEL_PROTECT;	/* set */
 				while ((*addr & INTEL_FINISHED) != INTEL_FINISHED)
 				{
-					if (get_timer_masked () > CFG_FLASH_UNLOCK_TOUT)
+					if (get_timer_masked () > CONFIG_SYS_FLASH_UNLOCK_TOUT)
 					{
 						printf("Flash lock bit operation timed out\n");
 						rc = 1;
diff --git a/board/xm250/lowlevel_init.S b/board/xm250/lowlevel_init.S
index 2ebd39554..8230550c6 100644
--- a/board/xm250/lowlevel_init.S
+++ b/board/xm250/lowlevel_init.S
@@ -24,7 +24,7 @@
 #include <version.h>
 #include <asm/arch/pxa-regs.h>
 
-DRAM_SIZE:  .long   CFG_DRAM_SIZE
+DRAM_SIZE:  .long   CONFIG_SYS_DRAM_SIZE
 
 /* wait for coprocessor write complete */
 	.macro CPWAIT reg
@@ -51,98 +51,98 @@ lowlevel_init:
 	/* Set up GPIO pins first */
 
 	ldr	r0,   =GPSR0
-	ldr	r1,   =CFG_GPSR0_VAL
+	ldr	r1,   =CONFIG_SYS_GPSR0_VAL
 	str	r1,   [r0]
 
 	ldr	r0,   =GPSR1
-	ldr	r1,   =CFG_GPSR1_VAL
+	ldr	r1,   =CONFIG_SYS_GPSR1_VAL
 	str	r1,   [r0]
 
 	ldr	r0,   =GPSR2
-	ldr	r1,   =CFG_GPSR2_VAL
+	ldr	r1,   =CONFIG_SYS_GPSR2_VAL
 	str	r1,   [r0]
 
 	ldr	r0,   =GPCR0
-	ldr	r1,   =CFG_GPCR0_VAL
+	ldr	r1,   =CONFIG_SYS_GPCR0_VAL
 	str	r1,   [r0]
 
 	ldr	r0,   =GPCR1
-	ldr	r1,   =CFG_GPCR1_VAL
+	ldr	r1,   =CONFIG_SYS_GPCR1_VAL
 	str	r1,   [r0]
 
 	ldr	r0,   =GPCR2
-	ldr	r1,   =CFG_GPCR2_VAL
+	ldr	r1,   =CONFIG_SYS_GPCR2_VAL
 	str	r1,   [r0]
 
 	ldr	r0,   =GRER0
-	ldr	r1,   =CFG_GRER0_VAL
+	ldr	r1,   =CONFIG_SYS_GRER0_VAL
 	str	r1,   [r0]
 
 	ldr	r0,   =GRER1
-	ldr	r1,   =CFG_GRER1_VAL
+	ldr	r1,   =CONFIG_SYS_GRER1_VAL
 	str	r1,   [r0]
 
 	ldr	r0,   =GRER2
-	ldr	r1,   =CFG_GRER2_VAL
+	ldr	r1,   =CONFIG_SYS_GRER2_VAL
 	str	r1,   [r0]
 
 	ldr	r0,   =GFER0
-	ldr	r1,   =CFG_GFER0_VAL
+	ldr	r1,   =CONFIG_SYS_GFER0_VAL
 	str	r1,   [r0]
 
 	ldr	r0,   =GFER1
-	ldr	r1,   =CFG_GFER1_VAL
+	ldr	r1,   =CONFIG_SYS_GFER1_VAL
 	str	r1,   [r0]
 
 	ldr	r0,   =GFER2
-	ldr	r1,   =CFG_GFER2_VAL
+	ldr	r1,   =CONFIG_SYS_GFER2_VAL
 	str	r1,   [r0]
 
 	ldr	r0,   =GPDR0
-	ldr	r1,   =CFG_GPDR0_VAL
+	ldr	r1,   =CONFIG_SYS_GPDR0_VAL
 	str	r1,   [r0]
 
 	ldr	r0,   =GPDR1
-	ldr	r1,   =CFG_GPDR1_VAL
+	ldr	r1,   =CONFIG_SYS_GPDR1_VAL
 	str	r1,   [r0]
 
 	ldr	r0,   =GPDR2
-	ldr	r1,   =CFG_GPDR2_VAL
+	ldr	r1,   =CONFIG_SYS_GPDR2_VAL
 	str	r1,   [r0]
 
 	ldr	r0,   =GAFR0_L
-	ldr	r1,   =CFG_GAFR0_L_VAL
+	ldr	r1,   =CONFIG_SYS_GAFR0_L_VAL
 	str	r1,   [r0]
 
 	ldr	r0,   =GAFR0_U
-	ldr	r1,   =CFG_GAFR0_U_VAL
+	ldr	r1,   =CONFIG_SYS_GAFR0_U_VAL
 	str	r1,   [r0]
 
 	ldr	r0,   =GAFR1_L
-	ldr	r1,   =CFG_GAFR1_L_VAL
+	ldr	r1,   =CONFIG_SYS_GAFR1_L_VAL
 	str	r1,   [r0]
 
 	ldr	r0,   =GAFR1_U
-	ldr	r1,   =CFG_GAFR1_U_VAL
+	ldr	r1,   =CONFIG_SYS_GAFR1_U_VAL
 	str	r1,   [r0]
 
 	ldr	r0,   =GAFR2_L
-	ldr	r1,   =CFG_GAFR2_L_VAL
+	ldr	r1,   =CONFIG_SYS_GAFR2_L_VAL
 	str	r1,   [r0]
 
 	ldr	r0,   =GAFR2_U
-	ldr	r1,   =CFG_GAFR2_U_VAL
+	ldr	r1,   =CONFIG_SYS_GAFR2_U_VAL
 	str	r1,   [r0]
 
 	/* enable GPIO pins */
 	ldr	r0,   =PSSR
-	ldr	r1,   =CFG_PSSR_VAL
+	ldr	r1,   =CONFIG_SYS_PSSR_VAL
 	str	r1,   [r0]
 
 	/* SET_LED 1 */
 
 	ldr	r3, =MSC1		/* low - bank 2 Lubbock Registers / SRAM */
-	ldr	r2, =CFG_MSC1_VAL	/* high - bank 3 Ethernet Controller */
+	ldr	r2, =CONFIG_SYS_MSC1_VAL	/* high - bank 3 Ethernet Controller */
 	str	r2, [r3]		/* need to set MSC1 before trying to write to the HEX LEDs */
 	ldr	r2, [r3]		/* need to read it back to make sure the value latches (see MSC section of manual) */
 
@@ -181,47 +181,47 @@ mem_init:
 	@ Step 2a
 	@ write msc0, read back to ensure data latches
 	@
-	ldr	r2,   =CFG_MSC0_VAL
+	ldr	r2,   =CONFIG_SYS_MSC0_VAL
 	str	r2,   [r1, #MSC0_OFFSET]
 	ldr	r2,   [r1, #MSC0_OFFSET]
 
 	@ write msc1
-	ldr	r2,  =CFG_MSC1_VAL
+	ldr	r2,  =CONFIG_SYS_MSC1_VAL
 	str	r2,  [r1, #MSC1_OFFSET]
 	ldr	r2,  [r1, #MSC1_OFFSET]
 
 	@ write msc2
-	ldr	r2,  =CFG_MSC2_VAL
+	ldr	r2,  =CONFIG_SYS_MSC2_VAL
 	str	r2,  [r1, #MSC2_OFFSET]
 	ldr	r2,  [r1, #MSC2_OFFSET]
 
 	@ Step 2b
 	@ write mecr
-	ldr	r2,  =CFG_MECR_VAL
+	ldr	r2,  =CONFIG_SYS_MECR_VAL
 	str	r2,  [r1, #MECR_OFFSET]
 
 	@ write mcmem0
-	ldr	r2,  =CFG_MCMEM0_VAL
+	ldr	r2,  =CONFIG_SYS_MCMEM0_VAL
 	str	r2,  [r1, #MCMEM0_OFFSET]
 
 	@ write mcmem1
-	ldr	r2,  =CFG_MCMEM1_VAL
+	ldr	r2,  =CONFIG_SYS_MCMEM1_VAL
 	str	r2,  [r1, #MCMEM1_OFFSET]
 
 	@ write mcatt0
-	ldr	r2,  =CFG_MCATT0_VAL
+	ldr	r2,  =CONFIG_SYS_MCATT0_VAL
 	str	r2,  [r1, #MCATT0_OFFSET]
 
 	@ write mcatt1
-	ldr	r2,  =CFG_MCATT1_VAL
+	ldr	r2,  =CONFIG_SYS_MCATT1_VAL
 	str	r2,  [r1, #MCATT1_OFFSET]
 
 	@ write mcio0
-	ldr	r2,  =CFG_MCIO0_VAL
+	ldr	r2,  =CONFIG_SYS_MCIO0_VAL
 	str	r2,  [r1, #MCIO0_OFFSET]
 
 	@ write mcio1
-	ldr	r2,  =CFG_MCIO1_VAL
+	ldr	r2,  =CONFIG_SYS_MCIO1_VAL
 	str	r2,  [r1, #MCIO1_OFFSET]
 
 	/*SET_LED 3 */
@@ -229,14 +229,14 @@ mem_init:
 	@ Step 2c
 	@ fly-by-dma is defeatured on this part
 	@ write flycnfg
-	@ldr	r2,  =CFG_FLYCNFG_VAL
+	@ldr	r2,  =CONFIG_SYS_FLYCNFG_VAL
 	@str	r2,  [r1, #FLYCNFG_OFFSET]
 
 /* FIXME Does this sequence really make sense */
 #ifdef REDBOOT_WAY
 	@ Step 2d
 	@ get the mdrefr settings
-	ldr	r3,  =CFG_MDREFR_VAL
+	ldr	r3,  =CONFIG_SYS_MDREFR_VAL
 
 	@ extract DRI field (we need a valid DRI field)
 	@
@@ -319,7 +319,7 @@ mem_init:
 #else
 	@ Step 2d
 	@ get the mdrefr settings
-	ldr	r4,  =CFG_MDREFR_VAL
+	ldr	r4,  =CONFIG_SYS_MDREFR_VAL
 
 	@ write back mdrefr
 	@
@@ -367,7 +367,7 @@ mem_init:
 	@ Step 4d
 	@ fetch platform value of mdcnfg
 	@
-	ldr	r2,  =CFG_MDCNFG_VAL
+	ldr	r2,  =CONFIG_SYS_MDCNFG_VAL
 
 	@ disable all sdram banks
 	@
@@ -404,7 +404,7 @@ mem_init:
 	@ Access memory *not yet enabled* for CBR refresh cycles (8)
 	@ - CBR is generated for all banks
 
-	ldr	r2, =CFG_DRAM_BASE
+	ldr	r2, =CONFIG_SYS_DRAM_BASE
 	str	r2, [r2]
 	str	r2, [r2]
 	str	r2, [r2]
@@ -434,7 +434,7 @@ mem_init:
 	@ Step 4h
 	@ write mdmrs
 	@
-	ldr	r2,  =CFG_MDMRS_VAL
+	ldr	r2,  =CONFIG_SYS_MDMRS_VAL
 	str	r2,  [r1, #MDMRS_OFFSET]
 
 	@ Done Memory Init
@@ -453,7 +453,7 @@ mem_init:
 
 	@ Set interrupt mask register
 	@
-	ldr	r1,  =CFG_ICMR_VAL
+	ldr	r1,  =CONFIG_SYS_ICMR_VAL
 	ldr	r2,  =ICMR
 	str	r1,  [r2]
 
@@ -469,7 +469,7 @@ mem_init:
 
 	@ set core clocks
 	@
-	ldr	r2,  =CFG_CCCR_VAL
+	ldr	r2,  =CONFIG_SYS_CCCR_VAL
 	ldr	r1,  =CCCR
 	str	r2,  [r1]
 
@@ -492,7 +492,7 @@ mem_init:
 	@ Turn on needed clocks
 	@
 	ldr	r1,  =CKEN
-	ldr	r2,  =CFG_CKEN_VAL
+	ldr	r2,  =CONFIG_SYS_CKEN_VAL
 	str	r2,  [r1]
 
 	/*SET_LED 7 */
diff --git a/board/xm250/u-boot.lds b/board/xm250/u-boot.lds
index bf42e9f3d..1e88820bc 100644
--- a/board/xm250/u-boot.lds
+++ b/board/xm250/u-boot.lds
@@ -51,6 +51,6 @@ SECTIONS
 
 	. = ALIGN(4);
 	__bss_start = .;
-	.bss (NOLOAD) : { *(.bss) }
+	.bss (NOLOAD) : { *(.bss) . = ALIGN(4); }
 	_end = .;
 }
diff --git a/board/xpedite1k/config.mk b/board/xpedite1k/config.mk
index e42b273a4..33dfbf1c0 100644
--- a/board/xpedite1k/config.mk
+++ b/board/xpedite1k/config.mk
@@ -38,5 +38,5 @@ PLATFORM_CPPFLAGS += -DDEBUG
 endif
 
 ifeq ($(dbcr),1)
-PLATFORM_CPPFLAGS += -DCFG_INIT_DBCR=0x8cff0000
+PLATFORM_CPPFLAGS += -DCONFIG_SYS_INIT_DBCR=0x8cff0000
 endif
diff --git a/board/xpedite1k/flash.c b/board/xpedite1k/flash.c
index ce5d4e180..0711931e6 100644
--- a/board/xpedite1k/flash.c
+++ b/board/xpedite1k/flash.c
@@ -57,9 +57,9 @@
 #define FLASH_SRAM_SEL_VAL	1
 
 
-flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips	*/
+flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips	*/
 
-static unsigned long flash_addr_table[8][CFG_MAX_FLASH_BANKS] = {
+static unsigned long flash_addr_table[8][CONFIG_SYS_MAX_FLASH_BANKS] = {
 	{0xfff80000},	/* 0:000: configuraton 3 */
 	{0xfff90000},	/* 1:001: configuraton 4 */
 	{0xfffa0000},	/* 2:010: configuraton 7 */
@@ -89,7 +89,7 @@ static int write_word (flash_info_t *info, ulong dest, ulong data);
 unsigned long flash_init (void)
 {
 	unsigned long total_b = 0;
-	unsigned long size_b[CFG_MAX_FLASH_BANKS];
+	unsigned long size_b[CONFIG_SYS_MAX_FLASH_BANKS];
 	unsigned short index = 0;
 	int i;
 
@@ -98,7 +98,7 @@ unsigned long flash_init (void)
 	DEBUGF("FLASH: Index: %d\n", index);
 
 	/* Init: no FLASHes known */
-	for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) {
+	for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
 		flash_info[i].flash_id = FLASH_UNKNOWN;
 		flash_info[i].sector_count = -1;
 		flash_info[i].size = 0;
@@ -366,7 +366,7 @@ int wait_for_DQ7(flash_info_t *info, int sect)
 	start = get_timer (0);
 	last  = start;
 	while ((addr[0] & (FLASH_WORD_SIZE)0x00800080) != (FLASH_WORD_SIZE)0x00800080) {
-		if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+		if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
 			printf ("Timeout\n");
 			return -1;
 		}
@@ -594,7 +594,7 @@ static int write_word (flash_info_t * info, ulong dest, ulong data)
 		while ((dest2[i] & (FLASH_WORD_SIZE) 0x00800080) !=
 		       (data2[i] & (FLASH_WORD_SIZE) 0x00800080)) {
 
-			if (get_timer (start) > CFG_FLASH_WRITE_TOUT) {
+			if (get_timer (start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
 				return (1);
 			}
 		}
diff --git a/board/xpedite1k/init.S b/board/xpedite1k/init.S
index 6cb20e40f..8a04f4f06 100644
--- a/board/xpedite1k/init.S
+++ b/board/xpedite1k/init.S
@@ -87,10 +87,10 @@
 tlbtab:
 	tlbtab_start
 	tlbentry( 0xf0000000, SZ_256M, 0xf0000000, 1, AC_R|AC_W|AC_X|SA_G|SA_I)
-	tlbentry( CFG_PERIPHERAL_BASE, SZ_256M, 0x40000000, 1, AC_R|AC_W|SA_G|SA_I)
-	tlbentry( CFG_ISRAM_BASE, SZ_256K, 0x80000000, 0, AC_R|AC_W|AC_X|SA_G|SA_I)
-	tlbentry( CFG_SDRAM_BASE, SZ_256M, 0x00000000, 0, AC_R|AC_W|AC_X|SA_G|SA_I )
-	tlbentry( CFG_SDRAM_BASE+0x10000000, SZ_256M, 0x10000000, 0, AC_R|AC_W|AC_X|SA_G|SA_I )
-	tlbentry( CFG_PCI_BASE, SZ_256M, 0x00000000, 2, AC_R|AC_W|SA_G|SA_I )
-	tlbentry( CFG_PCI_MEMBASE, SZ_256M, 0x00000000, 3, AC_R|AC_W|SA_G|SA_I )
+	tlbentry( CONFIG_SYS_PERIPHERAL_BASE, SZ_256M, 0x40000000, 1, AC_R|AC_W|SA_G|SA_I)
+	tlbentry( CONFIG_SYS_ISRAM_BASE, SZ_256K, 0x80000000, 0, AC_R|AC_W|AC_X|SA_G|SA_I)
+	tlbentry( CONFIG_SYS_SDRAM_BASE, SZ_256M, 0x00000000, 0, AC_R|AC_W|AC_X|SA_G|SA_I )
+	tlbentry( CONFIG_SYS_SDRAM_BASE+0x10000000, SZ_256M, 0x10000000, 0, AC_R|AC_W|AC_X|SA_G|SA_I )
+	tlbentry( CONFIG_SYS_PCI_BASE, SZ_256M, 0x00000000, 2, AC_R|AC_W|SA_G|SA_I )
+	tlbentry( CONFIG_SYS_PCI_MEMBASE, SZ_256M, 0x00000000, 3, AC_R|AC_W|SA_G|SA_I )
 	tlbtab_end
diff --git a/board/xpedite1k/u-boot.lds b/board/xpedite1k/u-boot.lds
index 70b1e38f3..13c52b9f6 100644
--- a/board/xpedite1k/u-boot.lds
+++ b/board/xpedite1k/u-boot.lds
@@ -79,7 +79,7 @@ SECTIONS
     lib_generic/zlib.o		(.text)
 
 /*    . = env_offset;*/
-/*    common/environment.o(.text)*/
+/*    common/env_embedded.o(.text)*/
 
     *(.text)
     *(.fixup)
@@ -150,6 +150,7 @@ SECTIONS
    *(.dynbss)
    *(.bss)
    *(COMMON)
+   . = ALIGN(4);
   }
   _end = . ;
   PROVIDE (end = .);
diff --git a/board/xpedite1k/u-boot.lds.debug b/board/xpedite1k/u-boot.lds.debug
index e0da854a4..116c2ba6a 100644
--- a/board/xpedite1k/u-boot.lds.debug
+++ b/board/xpedite1k/u-boot.lds.debug
@@ -68,7 +68,7 @@ SECTIONS
     lib_ppc/extable.o	(.text)
     lib_generic/zlib.o		(.text)
 
-/*    common/environment.o(.text) */
+/*    common/env_embedded.o(.text) */
 
     *(.text)
     *(.fixup)
diff --git a/board/xpedite1k/xpedite1k.c b/board/xpedite1k/xpedite1k.c
index c94a345d9..58bcfaf7b 100644
--- a/board/xpedite1k/xpedite1k.c
+++ b/board/xpedite1k/xpedite1k.c
@@ -40,7 +40,7 @@ int board_early_init_f(void)
 	/* TBS:	 Setup the GPIO access for the user LEDs */
 	mfsdr(sdr_pfc0, sdrreg);
 	mtsdr(sdr_pfc0, (sdrreg & ~0x00000100) | 0x00000E00);
-	out32(CFG_GPIO_BASE + 0x018, (USR_LED0 | USR_LED1 | USR_LED2 | USR_LED3));
+	out32(CONFIG_SYS_GPIO_BASE + 0x018, (USR_LED0 | USR_LED1 | USR_LED2 | USR_LED3));
 	LED0_OFF();
 	LED1_OFF();
 	LED2_OFF();
@@ -129,7 +129,7 @@ phys_size_t initdram (int board_type)
 }
 
 
-#if defined(CFG_DRAM_TEST)
+#if defined(CONFIG_SYS_DRAM_TEST)
 int testdram (void)
 {
 	uint *pstart = (uint *) 0x00000000;
@@ -231,7 +231,7 @@ int pci_pre_init(struct pci_controller * hose )
 		return (0);
 	}
 
-#if defined(CFG_PCI_FORCE_PCI_CONV)
+#if defined(CONFIG_SYS_PCI_FORCE_PCI_CONV)
 	/* Setup System Device Register PCIX0_XCR */
 	mfsdr(sdr_xcr, strap);
 	strap &= 0x0f000000;
@@ -249,7 +249,7 @@ int pci_pre_init(struct pci_controller * hose )
  *	may not be sufficient for a given board.
  *
  ************************************************************************/
-#if defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT)
+#if defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT)
 void pci_target_init(struct pci_controller * hose )
 {
 	/*--------------------------------------------------------------------------+
@@ -264,7 +264,7 @@ void pci_target_init(struct pci_controller * hose )
 	 * Map all of SDRAM to PCI address 0x0000_0000. Note that the 440 strapping
 	 * options to not support sizes such as 128/256 MB.
 	 *--------------------------------------------------------------------------*/
-	out32r( PCIX0_PIM0LAL, CFG_SDRAM_BASE );
+	out32r( PCIX0_PIM0LAL, CONFIG_SYS_SDRAM_BASE );
 	out32r( PCIX0_PIM0LAH, 0 );
 	out32r( PCIX0_PIM0SA, ~(gd->ram_size - 1) | 1 );
 
@@ -273,12 +273,12 @@ void pci_target_init(struct pci_controller * hose )
 	/*--------------------------------------------------------------------------+
 	 * Program the board's subsystem id/vendor id
 	 *--------------------------------------------------------------------------*/
-	out16r( PCIX0_SBSYSVID, CFG_PCI_SUBSYS_VENDORID );
-	out16r( PCIX0_SBSYSID, CFG_PCI_SUBSYS_DEVICEID );
+	out16r( PCIX0_SBSYSVID, CONFIG_SYS_PCI_SUBSYS_VENDORID );
+	out16r( PCIX0_SBSYSID, CONFIG_SYS_PCI_SUBSYS_DEVICEID );
 
 	out16r( PCIX0_CMD, in16r(PCIX0_CMD) | PCI_COMMAND_MEMORY );
 }
-#endif /* defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT) */
+#endif /* defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT) */
 
 
 /*************************************************************************
@@ -299,7 +299,7 @@ void pci_target_init(struct pci_controller * hose )
 #if defined(CONFIG_PCI)
 int is_pci_host(struct pci_controller *hose)
 {
-	return ((in32(CFG_GPIO_BASE + 0x1C) & 0x00000800) == 0);
+	return ((in32(CONFIG_SYS_GPIO_BASE + 0x1C) & 0x00000800) == 0);
 }
 #endif /* defined(CONFIG_PCI) */
 
@@ -317,7 +317,7 @@ int post_hotkeys_pressed(void)
 void post_word_store (ulong a)
 {
 	volatile ulong *save_addr =
-		(volatile ulong *)(CFG_POST_WORD_ADDR);
+		(volatile ulong *)(CONFIG_SYS_POST_WORD_ADDR);
 
 	*save_addr = a;
 }
@@ -325,7 +325,7 @@ void post_word_store (ulong a)
 ulong post_word_load (void)
 {
 	volatile ulong *save_addr =
-		(volatile ulong *)(CFG_POST_WORD_ADDR);
+		(volatile ulong *)(CONFIG_SYS_POST_WORD_ADDR);
 
 	return *save_addr;
 }
@@ -342,7 +342,7 @@ void board_get_enetaddr (uchar * enet)
 	unsigned char buff[0x100], *cp;
 
 	/* Initialize I2C					*/
-	i2c_init (CFG_I2C_SPEED, CFG_I2C_SLAVE);
+	i2c_init (CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
 
 	/* Read 256 bytes in EEPROM				*/
 	i2c_read (0x50, 0, 1, buff, 0x100);
diff --git a/board/xsengine/flash.c b/board/xsengine/flash.c
index a188e2440..736905ad7 100644
--- a/board/xsengine/flash.c
+++ b/board/xsengine/flash.c
@@ -29,7 +29,7 @@
 
 #define SWAP(x)               __swab32(x)
 
-flash_info_t	flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
+flash_info_t	flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */
 
 /* Functions */
 static ulong flash_get_size (vu_long *addr, flash_info_t *info);
@@ -43,7 +43,7 @@ unsigned long flash_init (void)
 	int i;
 	ulong size = 0;
 
-	for (i = 0; i < CFG_MAX_FLASH_BANKS; i++) {
+	for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) {
 		switch (i) {
 		case 0:
 			flash_get_size ((vu_long *) PHYS_FLASH_1, &flash_info[i]);
@@ -61,8 +61,8 @@ unsigned long flash_init (void)
 	}
 
 	/* Protect monitor and environment sectors */
-	flash_protect ( FLAG_PROTECT_SET,CFG_FLASH_BASE,CFG_FLASH_BASE + monitor_flash_len - 1,&flash_info[0] );
-	flash_protect ( FLAG_PROTECT_SET,CFG_ENV_ADDR,CFG_ENV_ADDR + CFG_ENV_SIZE - 1, &flash_info[0] );
+	flash_protect ( FLAG_PROTECT_SET,CONFIG_SYS_FLASH_BASE,CONFIG_SYS_FLASH_BASE + monitor_flash_len - 1,&flash_info[0] );
+	flash_protect ( FLAG_PROTECT_SET,CONFIG_ENV_ADDR,CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1, &flash_info[0] );
 
 	return size;
 }
@@ -338,7 +338,7 @@ int	flash_erase (flash_info_t *info, int s_first, int s_last)
 	last  = start;
 	addr = (vu_long*)(info->start[l_sect]);
 	while ((addr[0] & 0x00800080) != 0x00800080) {
-		if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+		if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
 			printf ("Timeout\n");
 			return 1;
 		}
@@ -462,7 +462,7 @@ static int write_word (flash_info_t *info, ulong dest, ulong data)
 	/* data polling for D7 */
 	start = get_timer (0);
 	while ((*((vu_long *)dest) & 0x00800080) != (data & 0x00800080)) {
-		if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+		if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
 			return (1);
 		}
 	}
diff --git a/board/xsengine/lowlevel_init.S b/board/xsengine/lowlevel_init.S
index b0b156124..0d94ab60a 100644
--- a/board/xsengine/lowlevel_init.S
+++ b/board/xsengine/lowlevel_init.S
@@ -2,7 +2,7 @@
 #include <version.h>
 #include <asm/arch/pxa-regs.h>
 
-DRAM_SIZE:  .long   CFG_DRAM_SIZE
+DRAM_SIZE:  .long   CONFIG_SYS_DRAM_SIZE
 
 .globl lowlevel_init
 lowlevel_init:
@@ -14,93 +14,93 @@ lowlevel_init:
 
    /* General purpose set registers */
    ldr      r0,   =GPSR0
-   ldr      r1,   =CFG_GPSR0_VAL
+   ldr      r1,   =CONFIG_SYS_GPSR0_VAL
    str      r1,   [r0]
    ldr      r0,   =GPSR1
-   ldr      r1,   =CFG_GPSR1_VAL
+   ldr      r1,   =CONFIG_SYS_GPSR1_VAL
    str      r1,   [r0]
    ldr      r0,   =GPSR2
-   ldr      r1,   =CFG_GPSR2_VAL
+   ldr      r1,   =CONFIG_SYS_GPSR2_VAL
    str      r1,   [r0]
 
    /* General purpose clear registers */
    ldr      r0,   =GPCR0
-   ldr      r1,   =CFG_GPCR0_VAL
+   ldr      r1,   =CONFIG_SYS_GPCR0_VAL
    str      r1,   [r0]
    ldr      r0,   =GPCR1
-   ldr      r1,   =CFG_GPCR1_VAL
+   ldr      r1,   =CONFIG_SYS_GPCR1_VAL
    str      r1,   [r0]
    ldr      r0,   =GPCR2
-   ldr      r1,   =CFG_GPCR2_VAL
+   ldr      r1,   =CONFIG_SYS_GPCR2_VAL
    str      r1,   [r0]
 
    /* General rising edge registers */
    ldr      r0,   =GRER0
-   ldr      r1,   =CFG_GRER0_VAL
+   ldr      r1,   =CONFIG_SYS_GRER0_VAL
    str      r1,   [r0]
    ldr      r0,   =GRER1
-   ldr      r1,   =CFG_GRER1_VAL
+   ldr      r1,   =CONFIG_SYS_GRER1_VAL
    str      r1,   [r0]
    ldr      r0,   =GRER2
-   ldr      r1,   =CFG_GRER2_VAL
+   ldr      r1,   =CONFIG_SYS_GRER2_VAL
    str      r1,   [r0]
 
    /* General falling edge registers */
    ldr      r0,   =GFER0
-   ldr      r1,   =CFG_GFER0_VAL
+   ldr      r1,   =CONFIG_SYS_GFER0_VAL
    str      r1,   [r0]
    ldr      r0,   =GFER1
-   ldr      r1,   =CFG_GFER1_VAL
+   ldr      r1,   =CONFIG_SYS_GFER1_VAL
    str      r1,   [r0]
    ldr      r0,   =GFER2
-   ldr      r1,   =CFG_GFER2_VAL
+   ldr      r1,   =CONFIG_SYS_GFER2_VAL
    str      r1,   [r0]
 
    /* General edge detect registers */
    ldr      r0,   =GPDR0
-   ldr      r1,   =CFG_GPDR0_VAL
+   ldr      r1,   =CONFIG_SYS_GPDR0_VAL
    str      r1,   [r0]
    ldr      r0,   =GPDR1
-   ldr      r1,   =CFG_GPDR1_VAL
+   ldr      r1,   =CONFIG_SYS_GPDR1_VAL
    str      r1,   [r0]
    ldr      r0,   =GPDR2
-   ldr      r1,   =CFG_GPDR2_VAL
+   ldr      r1,   =CONFIG_SYS_GPDR2_VAL
    str      r1,   [r0]
 
    /* General alternate function registers */
    ldr      r0,   =GAFR0_L		/* [0:15] */
-   ldr      r1,   =CFG_GAFR0_L_VAL
+   ldr      r1,   =CONFIG_SYS_GAFR0_L_VAL
    str      r1,   [r0]
    ldr      r0,   =GAFR0_U		/* [31:16] */
-   ldr      r1,   =CFG_GAFR0_U_VAL
+   ldr      r1,   =CONFIG_SYS_GAFR0_U_VAL
    str      r1,   [r0]
    ldr      r0,   =GAFR1_L		/* [47:32] */
-   ldr      r1,   =CFG_GAFR1_L_VAL
+   ldr      r1,   =CONFIG_SYS_GAFR1_L_VAL
    str      r1,   [r0]
    ldr      r0,   =GAFR1_U		/* [63:48] */
-   ldr      r1,   =CFG_GAFR1_U_VAL
+   ldr      r1,   =CONFIG_SYS_GAFR1_U_VAL
    str      r1,   [r0]
    ldr      r0,   =GAFR2_L		/* [79:64] */
-   ldr      r1,   =CFG_GAFR2_L_VAL
+   ldr      r1,   =CONFIG_SYS_GAFR2_L_VAL
    str      r1,   [r0]
    ldr      r0,   =GAFR2_U		/* [80] */
-   ldr      r1,   =CFG_GAFR2_U_VAL
+   ldr      r1,   =CONFIG_SYS_GAFR2_U_VAL
    str      r1,   [r0]
 
    /* General purpose direction registers */
    ldr      r0,   =GPDR0
-   ldr      r1,   =CFG_GPDR0_VAL
+   ldr      r1,   =CONFIG_SYS_GPDR0_VAL
    str      r1,   [r0]
    ldr      r0,   =GPDR1
-   ldr      r1,   =CFG_GPDR1_VAL
+   ldr      r1,   =CONFIG_SYS_GPDR1_VAL
    str      r1,   [r0]
    ldr      r0,   =GPDR2
-   ldr      r1,   =CFG_GPDR2_VAL
+   ldr      r1,   =CONFIG_SYS_GPDR2_VAL
    str      r1,   [r0]
 
    /* Power manager sleep status */
    ldr      r0,   =PSSR
-   ldr      r1,   =CFG_PSSR_VAL
+   ldr      r1,   =CONFIG_SYS_PSSR_VAL
    str      r1,   [r0]
 
 /* ---- MEMORY INITIALISATION ---- */
@@ -121,17 +121,17 @@ mem_init:
 
 /* ---- FLASH INITIALISATION ---- */
 /* Write MSC0 and read back to ensure data change is accepted by cpu */
-   ldr     r2,   =CFG_MSC0_VAL
+   ldr     r2,   =CONFIG_SYS_MSC0_VAL
    str     r2,   [r1, #MSC0_OFFSET]
    ldr     r2,   [r1, #MSC0_OFFSET]
 
 /* ---- SDRAM INITIALISATION ---- */
 /* get the MDREFR settings */
-   ldr     r2,  =CFG_MDREFR_VAL
+   ldr     r2,  =CONFIG_SYS_MDREFR_VAL
    str     r2,  [r1, #MDREFR_OFFSET]
 
 /* fetch platform value of MDCNFG */
-   ldr     r2,  =CFG_MDCNFG_VAL
+   ldr     r2,  =CONFIG_SYS_MDCNFG_VAL
 
 /* disable all sdram banks */
    bic     r2,  r2,  #(MDCNFG_DE0 | MDCNFG_DE1)
@@ -153,7 +153,7 @@ mem_init:
 /* Access memory *not yet enabled* for CBR refresh cycles (8) */
 /* CBR is generated for all banks */
 
-   ldr     r2, =CFG_DRAM_BASE
+   ldr     r2, =CONFIG_SYS_DRAM_BASE
    str     r2, [r2]
    str     r2, [r2]
    str     r2, [r2]
@@ -172,7 +172,7 @@ mem_init:
    str     r2,  [r1, #MDCNFG_OFFSET]
 
 /* write MDMRS to trigger an MSR command to all enabled SDRAM banks */
-   ldr     r2,  =CFG_MDMRS_VAL
+   ldr     r2,  =CONFIG_SYS_MDMRS_VAL
    str     r2,  [r1, #MDMRS_OFFSET]
 
 /* ---- INTERRUPT INITIALISATION ---- */
@@ -183,7 +183,7 @@ mem_init:
    str     r1,  [r2]
 
 /* Set interrupt mask register */
-   ldr     r1,  =CFG_ICMR_VAL
+   ldr     r1,  =CONFIG_SYS_ICMR_VAL
    ldr     r2,  =ICMR
    str     r1,  [r2]
 
@@ -196,7 +196,7 @@ mem_init:
    str     r2,  [r1]
 
 /* set core clocks */
-   ldr     r2,  =CFG_CCCR_VAL
+   ldr     r2,  =CONFIG_SYS_CCCR_VAL
    ldr     r1,  =CCCR
    str     r2,  [r1]
 
@@ -215,7 +215,7 @@ mem_init:
 
 /* Turn on needed clocks */
    ldr     r1,  =CKEN
-   ldr     r2,  =CFG_CKEN_VAL
+   ldr     r2,  =CONFIG_SYS_CKEN_VAL
    str     r2,  [r1]
 
    mov   pc, r10
diff --git a/board/xsengine/u-boot.lds b/board/xsengine/u-boot.lds
index bf42e9f3d..1e88820bc 100644
--- a/board/xsengine/u-boot.lds
+++ b/board/xsengine/u-boot.lds
@@ -51,6 +51,6 @@ SECTIONS
 
 	. = ALIGN(4);
 	__bss_start = .;
-	.bss (NOLOAD) : { *(.bss) }
+	.bss (NOLOAD) : { *(.bss) . = ALIGN(4); }
 	_end = .;
 }
diff --git a/board/zeus/u-boot.lds b/board/zeus/u-boot.lds
index d803625b5..877573e0d 100644
--- a/board/zeus/u-boot.lds
+++ b/board/zeus/u-boot.lds
@@ -126,6 +126,7 @@ SECTIONS
    *(.dynbss)
    *(.bss)
    *(COMMON)
+   . = ALIGN(4);
   }
   _end = . ;
   PROVIDE (end = .);
diff --git a/board/zeus/update.c b/board/zeus/update.c
index c76519f09..2f2a127f7 100644
--- a/board/zeus/update.c
+++ b/board/zeus/update.c
@@ -67,12 +67,12 @@ u8 buf_zeus_pe[] = {
 static int update_boot_eeprom(void)
 {
 	u32 len = 0x20;
-	u8 chip = CFG_I2C_EEPROM_ADDR;
+	u8 chip = CONFIG_SYS_I2C_EEPROM_ADDR;
 	u8 *pbuf;
 	u8 base;
 	int i;
 
-	if (in_be32((void *)GPIO0_IR) & GPIO_VAL(CFG_GPIO_ZEUS_PE)) {
+	if (in_be32((void *)GPIO0_IR) & GPIO_VAL(CONFIG_SYS_GPIO_ZEUS_PE)) {
 		pbuf = buf_zeus_pe;
 		base = 0x40;
 	} else {
diff --git a/board/zeus/zeus.c b/board/zeus/zeus.c
index 33d971ab0..974bdf29c 100644
--- a/board/zeus/zeus.c
+++ b/board/zeus/zeus.c
@@ -38,7 +38,7 @@ DECLARE_GLOBAL_DATA_PTR;
 #define REBOOT_NOP	0x00000000
 #define REBOOT_DO_POST	0x00000001
 
-extern flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips	*/
+extern flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips	*/
 extern env_t *env_ptr;
 extern uchar default_environment[];
 
@@ -73,8 +73,8 @@ int misc_init_r(void)
 	u32 post_magic;
 	u32 post_val;
 
-	post_magic = in_be32((void *)CFG_POST_MAGIC);
-	post_val = in_be32((void *)CFG_POST_VAL);
+	post_magic = in_be32((void *)CONFIG_SYS_POST_MAGIC);
+	post_val = in_be32((void *)CONFIG_SYS_POST_VAL);
 	if ((post_magic == REBOOT_MAGIC) && (post_val == REBOOT_DO_POST)) {
 		/*
 		 * Set special bootline bootparameter to pass this POST boot
@@ -87,7 +87,7 @@ int misc_init_r(void)
 		 * via the sw-reset button. So disable further tests
 		 * upon next bootup here.
 		 */
-		out_be32((void *)CFG_POST_VAL, REBOOT_NOP);
+		out_be32((void *)CONFIG_SYS_POST_VAL, REBOOT_NOP);
 	} else {
 		/*
 		 * Only run POST when initiated via the sw-reset button mechanism
@@ -144,14 +144,14 @@ int misc_init_r(void)
 
 	/* Monitor protection ON by default */
 	(void)flash_protect(FLAG_PROTECT_SET,
-			    -CFG_MONITOR_LEN,
+			    -CONFIG_SYS_MONITOR_LEN,
 			    0xffffffff,
 			    &flash_info[0]);
 
 	/* Env protection ON by default */
 	(void)flash_protect(FLAG_PROTECT_SET,
-			    CFG_ENV_ADDR_REDUND,
-			    CFG_ENV_ADDR_REDUND + 2*CFG_ENV_SECT_SIZE - 1,
+			    CONFIG_ENV_ADDR_REDUND,
+			    CONFIG_ENV_ADDR_REDUND + 2*CONFIG_ENV_SECT_SIZE - 1,
 			    &flash_info[0]);
 
 	return 0;
@@ -166,7 +166,7 @@ int checkboard(void)
 
 	puts("Board: Zeus-");
 
-	if (in_be32((void *)GPIO0_IR) & GPIO_VAL(CFG_GPIO_ZEUS_PE))
+	if (in_be32((void *)GPIO0_IR) & GPIO_VAL(CONFIG_SYS_GPIO_ZEUS_PE))
 		puts("PE");
 	else
 		puts("CE");
@@ -180,39 +180,16 @@ int checkboard(void)
 	putc('\n');
 
 	/* both LED's off */
-	gpio_write_bit(CFG_GPIO_LED_RED, 0);
-	gpio_write_bit(CFG_GPIO_LED_GREEN, 0);
+	gpio_write_bit(CONFIG_SYS_GPIO_LED_RED, 0);
+	gpio_write_bit(CONFIG_SYS_GPIO_LED_GREEN, 0);
 	udelay(10000);
 	/* and on again */
-	gpio_write_bit(CFG_GPIO_LED_RED, 1);
-	gpio_write_bit(CFG_GPIO_LED_GREEN, 1);
+	gpio_write_bit(CONFIG_SYS_GPIO_LED_RED, 1);
+	gpio_write_bit(CONFIG_SYS_GPIO_LED_GREEN, 1);
 
 	return (0);
 }
 
-static u32 detect_sdram_size(void)
-{
-	u32 val;
-	u32 size;
-
-	mfsdram(mem_mb0cf, val);
-	size = (4 << 20) << ((val & 0x000e0000) >> 17);
-
-	/*
-	 * Check if 2nd bank is enabled too
-	 */
-	mfsdram(mem_mb1cf, val);
-	if (val & 1)
-		size += (4 << 20) << ((val & 0x000e0000) >> 17);
-
-	return size;
-}
-
-phys_size_t initdram (int board_type)
-{
-	return detect_sdram_size();
-}
-
 static int default_env_var(char *buf, char *var)
 {
 	char *ptr;
@@ -249,12 +226,12 @@ static int restore_default(void)
 	 * Unprotect and erase environment area
 	 */
 	flash_protect(FLAG_PROTECT_CLEAR,
-		      CFG_ENV_ADDR_REDUND,
-		      CFG_ENV_ADDR_REDUND + 2*CFG_ENV_SECT_SIZE - 1,
+		      CONFIG_ENV_ADDR_REDUND,
+		      CONFIG_ENV_ADDR_REDUND + 2*CONFIG_ENV_SECT_SIZE - 1,
 		      &flash_info[0]);
 
-	flash_sect_erase(CFG_ENV_ADDR_REDUND,
-			 CFG_ENV_ADDR_REDUND + 2*CFG_ENV_SECT_SIZE - 1);
+	flash_sect_erase(CONFIG_ENV_ADDR_REDUND,
+			 CONFIG_ENV_ADDR_REDUND + 2*CONFIG_ENV_SECT_SIZE - 1);
 
 	/*
 	 * Now restore default environment from U-Boot image
@@ -262,7 +239,7 @@ static int restore_default(void)
 	 */
 	memset(env_ptr, 0, sizeof(env_t));
 	memcpy(env_ptr->data, default_environment, ENV_SIZE);
-#ifdef CFG_REDUNDAND_ENVIRONMENT
+#ifdef CONFIG_SYS_REDUNDAND_ENVIRONMENT
 	env_ptr->flags = 0xFF;
 #endif
 	env_crc_update();
@@ -356,7 +333,7 @@ U_BOOT_CMD(
 
 static inline int sw_reset_pressed(void)
 {
-	return !(in_be32((void *)GPIO0_IR) & GPIO_VAL(CFG_GPIO_SW_RESET));
+	return !(in_be32((void *)GPIO0_IR) & GPIO_VAL(CONFIG_SYS_GPIO_SW_RESET));
 }
 
 int do_chkreset(cmd_tbl_t* cmdtp, int flag, int argc, char* argv[])
@@ -379,16 +356,16 @@ int do_chkreset(cmd_tbl_t* cmdtp, int flag, int argc, char* argv[])
 		if (!sw_reset_pressed())
 			break;
 
-		if ((delta > CFG_TIME_POST) && !post) {
+		if ((delta > CONFIG_SYS_TIME_POST) && !post) {
 			printf("\nWhen released now, POST tests will be started.");
-			gpio_write_bit(CFG_GPIO_LED_GREEN, 0);
+			gpio_write_bit(CONFIG_SYS_GPIO_LED_GREEN, 0);
 			post = 1;
 		}
 
-		if ((delta > CFG_TIME_FACTORY_RESET) && !factory_reset) {
+		if ((delta > CONFIG_SYS_TIME_FACTORY_RESET) && !factory_reset) {
 			printf("\nWhen released now, factory default values"
 			       " will be restored.");
-			gpio_write_bit(CFG_GPIO_LED_RED, 0);
+			gpio_write_bit(CONFIG_SYS_GPIO_LED_RED, 0);
 			factory_reset = 1;
 		}
 
@@ -400,7 +377,7 @@ int do_chkreset(cmd_tbl_t* cmdtp, int flag, int argc, char* argv[])
 
 	printf("\nSW-Reset Button released after %d milli-seconds!\n", delta);
 
-	if (delta > CFG_TIME_FACTORY_RESET) {
+	if (delta > CONFIG_SYS_TIME_FACTORY_RESET) {
 		printf("Starting factory reset value restoration...\n");
 
 		/*
@@ -416,14 +393,14 @@ int do_chkreset(cmd_tbl_t* cmdtp, int flag, int argc, char* argv[])
 		return 0;
 	}
 
-	if (delta > CFG_TIME_POST) {
+	if (delta > CONFIG_SYS_TIME_POST) {
 		printf("Starting POST configuration...\n");
 
 		/*
 		 * Enable POST upon next bootup
 		 */
-		out_be32((void *)CFG_POST_MAGIC, REBOOT_MAGIC);
-		out_be32((void *)CFG_POST_VAL, REBOOT_DO_POST);
+		out_be32((void *)CONFIG_SYS_POST_MAGIC, REBOOT_MAGIC);
+		out_be32((void *)CONFIG_SYS_POST_VAL, REBOOT_DO_POST);
 		post_bootmode_init();
 
 		/*
@@ -455,8 +432,8 @@ int post_hotkeys_pressed(void)
 	u32 post_magic;
 	u32 post_val;
 
-	post_magic = in_be32((void *)CFG_POST_MAGIC);
-	post_val = in_be32((void *)CFG_POST_VAL);
+	post_magic = in_be32((void *)CONFIG_SYS_POST_MAGIC);
+	post_val = in_be32((void *)CONFIG_SYS_POST_VAL);
 
 	if ((post_magic == REBOOT_MAGIC) && (post_val == REBOOT_DO_POST))
 		return 1;
diff --git a/board/zpc1900/zpc1900.c b/board/zpc1900/zpc1900.c
index 103ef714f..027d56662 100644
--- a/board/zpc1900/zpc1900.c
+++ b/board/zpc1900/zpc1900.c
@@ -183,7 +183,7 @@ const iop_conf_t iop_conf_tab[4][32] = {
     }
 };
 
-#ifdef CFG_NVRAM_ACCESS_ROUTINE
+#ifdef CONFIG_SYS_NVRAM_ACCESS_ROUTINE
 void *nvram_read(void *dest, long src, size_t count)
 {
 	return memcpy(dest, (const void *)src, count);
@@ -191,8 +191,8 @@ void *nvram_read(void *dest, long src, size_t count)
 
 void nvram_write(long dest, const void *src, size_t count)
 {
-	vu_char     *p1 = (vu_char *)(CFG_EEPROM + 0x1555);
-	vu_char     *p2 = (vu_char *)(CFG_EEPROM + 0x0AAA);
+	vu_char     *p1 = (vu_char *)(CONFIG_SYS_EEPROM + 0x1555);
+	vu_char     *p2 = (vu_char *)(CONFIG_SYS_EEPROM + 0x0AAA);
 	vu_char     *d = (vu_char *)dest;
 	const uchar *s = (const uchar *)src;
 
@@ -218,16 +218,16 @@ void nvram_write(long dest, const void *src, size_t count)
 	*p1 = 0xA0;
 	udelay(10000);
 }
-#endif /* CFG_NVRAM_ACCESS_ROUTINE */
+#endif /* CONFIG_SYS_NVRAM_ACCESS_ROUTINE */
 
 phys_size_t initdram(int board_type)
 {
-	vu_char *bcsr = (vu_char *)CFG_BCSR;
-	volatile immap_t *immap = (immap_t *)CFG_IMMR;
+	vu_char *bcsr = (vu_char *)CONFIG_SYS_BCSR;
+	volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR;
 	volatile memctl8260_t *memctl = &immap->im_memctl;
 	vu_char *ramaddr;
 	uchar c = 0xFF;
-	long int msize = CFG_SDRAM_SIZE;
+	long int msize = CONFIG_SYS_SDRAM_SIZE;
 	int i;
 
 	if (bcsr[4] & BCSR_PCI_MODE) { /* PCI mode selected by JP9 */
@@ -237,38 +237,38 @@ phys_size_t initdram(int board_type)
 			| SIUMCR_LBPC01;
 	}
 
-#ifndef CFG_RAMBOOT
+#ifndef CONFIG_SYS_RAMBOOT
 	immap->im_siu_conf.sc_ppc_acr  = 0x03;
 	immap->im_siu_conf.sc_ppc_alrh = 0x30126745;
 	immap->im_siu_conf.sc_tescr1   = 0x00004000;
 
-	memctl->memc_mptpr = CFG_MPTPR;
+	memctl->memc_mptpr = CONFIG_SYS_MPTPR;
 
-#ifdef CFG_LSDRAM_BASE
+#ifdef CONFIG_SYS_LSDRAM_BASE
 	/*
 	  Initialise local bus SDRAM only if the pins
 	  are configured as local bus pins and not as PCI.
 	*/
 	if ((immap->im_siu_conf.sc_siumcr & SIUMCR_LBPC11) == SIUMCR_LBPC00) {
-		memctl->memc_lsrt  = CFG_LSRT;
-		memctl->memc_or4   = CFG_LSDRAM_OR;
-		memctl->memc_br4   = CFG_LSDRAM_BR;
-		ramaddr = (vu_char *)CFG_LSDRAM_BASE;
-		memctl->memc_lsdmr = CFG_LSDMR | PSDMR_OP_PREA;
+		memctl->memc_lsrt  = CONFIG_SYS_LSRT;
+		memctl->memc_or4   = CONFIG_SYS_LSDRAM_OR;
+		memctl->memc_br4   = CONFIG_SYS_LSDRAM_BR;
+		ramaddr = (vu_char *)CONFIG_SYS_LSDRAM_BASE;
+		memctl->memc_lsdmr = CONFIG_SYS_LSDMR | PSDMR_OP_PREA;
 		*ramaddr = c;
-		memctl->memc_lsdmr = CFG_LSDMR | PSDMR_OP_CBRR;
+		memctl->memc_lsdmr = CONFIG_SYS_LSDMR | PSDMR_OP_CBRR;
 		for (i = 0; i < 8; i++)
 			*ramaddr = c;
-		memctl->memc_lsdmr = CFG_LSDMR | PSDMR_OP_MRW;
+		memctl->memc_lsdmr = CONFIG_SYS_LSDMR | PSDMR_OP_MRW;
 		*ramaddr = c;
-		memctl->memc_lsdmr = CFG_LSDMR | PSDMR_RFEN;
+		memctl->memc_lsdmr = CONFIG_SYS_LSDMR | PSDMR_RFEN;
 	}
-#endif /* CFG_LSDRAM_BASE */
+#endif /* CONFIG_SYS_LSDRAM_BASE */
 
 	/* Initialise 60x bus SDRAM */
-	memctl->memc_psrt = CFG_PSRT;
-	memctl->memc_or2  = CFG_PSDRAM_OR;
-	memctl->memc_br2  = CFG_PSDRAM_BR;
+	memctl->memc_psrt = CONFIG_SYS_PSRT;
+	memctl->memc_or2  = CONFIG_SYS_PSDRAM_OR;
+	memctl->memc_br2  = CONFIG_SYS_PSDRAM_BR;
 	/*
 	 * The mode data for Mode Register Write command must appear on
 	 * the address lines during a mode-set cycle. It is driven by
@@ -278,18 +278,18 @@ phys_size_t initdram(int board_type)
 	 * the address lines. BL=0 because for 64-bit port size burst
 	 * length must be 4.
 	 */
-	ramaddr = (vu_char *)(CFG_SDRAM_BASE |
-			      ((CFG_PSDMR & PSDMR_CL_MSK) << 7) | 0x10);
-	memctl->memc_psdmr = CFG_PSDMR | PSDMR_OP_PREA; /* Precharge all banks */
+	ramaddr = (vu_char *)(CONFIG_SYS_SDRAM_BASE |
+			      ((CONFIG_SYS_PSDMR & PSDMR_CL_MSK) << 7) | 0x10);
+	memctl->memc_psdmr = CONFIG_SYS_PSDMR | PSDMR_OP_PREA; /* Precharge all banks */
 	*ramaddr = c;
-	memctl->memc_psdmr = CFG_PSDMR | PSDMR_OP_CBRR; /* CBR refresh */
+	memctl->memc_psdmr = CONFIG_SYS_PSDMR | PSDMR_OP_CBRR; /* CBR refresh */
 	for (i = 0; i < 8; i++)
 		*ramaddr = c;
-	memctl->memc_psdmr = CFG_PSDMR | PSDMR_OP_MRW;  /* Mode Register write */
+	memctl->memc_psdmr = CONFIG_SYS_PSDMR | PSDMR_OP_MRW;  /* Mode Register write */
 	*ramaddr = c;
-	memctl->memc_psdmr = CFG_PSDMR | PSDMR_RFEN;    /* Refresh enable */
+	memctl->memc_psdmr = CONFIG_SYS_PSDMR | PSDMR_RFEN;    /* Refresh enable */
 	*ramaddr = c;
-#endif /* CFG_RAMBOOT */
+#endif /* CONFIG_SYS_RAMBOOT */
 
 	/* Return total 60x bus SDRAM size */
 	return msize * 1024 * 1024;
@@ -297,7 +297,7 @@ phys_size_t initdram(int board_type)
 
 int checkboard(void)
 {
-	vu_char *bcsr = (vu_char *)CFG_BCSR;
+	vu_char *bcsr = (vu_char *)CONFIG_SYS_BCSR;
 
 	printf("Board: Zephyr ZPC.1900 Rev. %c\n", bcsr[2] + 0x40);
 	return 0;
diff --git a/board/zylonite/flash.c b/board/zylonite/flash.c
index 883c1ba3b..5ba84c68e 100644
--- a/board/zylonite/flash.c
+++ b/board/zylonite/flash.c
@@ -28,7 +28,7 @@
 #include <linux/byteorder/swab.h>
 
 
-flash_info_t flash_info[CFG_MAX_FLASH_BANKS];	/* info for FLASH chips    */
+flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];	/* info for FLASH chips    */
 
 /* Board support for 1 or 2 flash devices */
 #define FLASH_PORT_WIDTH32
@@ -66,7 +66,7 @@ unsigned long flash_init (void)
 	int i;
 	ulong size = 0;
 
-	for (i = 0; i < CFG_MAX_FLASH_BANKS; i++) {
+	for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) {
 		switch (i) {
 		case 0:
 			flash_get_size ((FPW *) PHYS_FLASH_1, &flash_info[i]);
@@ -86,13 +86,13 @@ unsigned long flash_init (void)
 	/* Protect monitor and environment sectors
 	 */
 	flash_protect ( FLAG_PROTECT_SET,
-			CFG_FLASH_BASE,
-			CFG_FLASH_BASE + monitor_flash_len - 1,
+			CONFIG_SYS_FLASH_BASE,
+			CONFIG_SYS_FLASH_BASE + monitor_flash_len - 1,
 			&flash_info[0] );
 
 	flash_protect ( FLAG_PROTECT_SET,
-			CFG_ENV_ADDR,
-			CFG_ENV_ADDR + CFG_ENV_SIZE - 1, &flash_info[0] );
+			CONFIG_ENV_ADDR,
+			CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1, &flash_info[0] );
 
 	return size;
 #endif
@@ -206,10 +206,10 @@ static ulong flash_get_size (FPW *addr, flash_info_t *info)
 		break;
 	}
 
-	if (info->sector_count > CFG_MAX_FLASH_SECT) {
+	if (info->sector_count > CONFIG_SYS_MAX_FLASH_SECT) {
 		printf ("** ERROR: sector count %d > max (%d) **\n",
-			info->sector_count, CFG_MAX_FLASH_SECT);
-		info->sector_count = CFG_MAX_FLASH_SECT;
+			info->sector_count, CONFIG_SYS_MAX_FLASH_SECT);
+		info->sector_count = CONFIG_SYS_MAX_FLASH_SECT;
 	}
 
 	addr[0] = (FPW) 0x00FF00FF;		/* restore read mode */
@@ -279,7 +279,7 @@ int flash_erase (flash_info_t *info, int s_first, int s_last)
 			*addr = (FPW) 0x00D000D0;	/* erase confirm */
 
 			while (((status = *addr) & (FPW) 0x00800080) != (FPW) 0x00800080) {
-				if (get_timer_masked () > CFG_FLASH_ERASE_TOUT) {
+				if (get_timer_masked () > CONFIG_SYS_FLASH_ERASE_TOUT) {
 					printf ("Timeout\n");
 					*addr = (FPW) 0x00B000B0;	/* suspend erase     */
 					*addr = (FPW) 0x00FF00FF;	/* reset to read mode */
@@ -413,7 +413,7 @@ static int write_data (flash_info_t *info, ulong dest, FPW data)
 
 	/* wait while polling the status register */
 	while (((status = *addr) & (FPW) 0x00800080) != (FPW) 0x00800080) {
-		if (get_timer_masked () > CFG_FLASH_WRITE_TOUT) {
+		if (get_timer_masked () > CONFIG_SYS_FLASH_WRITE_TOUT) {
 			*addr = (FPW) 0x00FF00FF;	/* restore read mode */
 			return (1);
 		}
diff --git a/board/zylonite/lowlevel_init.S b/board/zylonite/lowlevel_init.S
index da0176564..ff17c7e7b 100644
--- a/board/zylonite/lowlevel_init.S
+++ b/board/zylonite/lowlevel_init.S
@@ -29,7 +29,7 @@
 #include <version.h>
 #include <asm/arch/pxa-regs.h>
 
-DRAM_SIZE:  .long   CFG_DRAM_SIZE
+DRAM_SIZE:  .long   CONFIG_SYS_DRAM_SIZE
 
 /* wait for coprocessor write complete */
 .macro CPWAIT reg
@@ -235,13 +235,13 @@ mem_init:
 	orr		r1, r1, #0x40000000	@ enable SDRAM for Normal Access
 	str		r1, [r0]
 
-#ifndef CFG_SKIP_DRAM_SCRUB
+#ifndef CONFIG_SYS_SKIP_DRAM_SCRUB
 	/* scrub/init SDRAM if enabled/present */
-/*	ldr	r11, =0xa0000000 /\* base address of SDRAM (CFG_DRAM_BASE) *\/ */
-/*	ldr	r12, =0x04000000 /\* size of memory to scrub (CFG_DRAM_SIZE) *\/ */
+/*	ldr	r11, =0xa0000000 /\* base address of SDRAM (CONFIG_SYS_DRAM_BASE) *\/ */
+/*	ldr	r12, =0x04000000 /\* size of memory to scrub (CONFIG_SYS_DRAM_SIZE) *\/ */
 /*	mov	r8,r12		 /\* save DRAM size (mk: why???) *\/ */
-	ldr	r8, =0xa0000000	 /* base address of SDRAM (CFG_DRAM_BASE) */
-	ldr	r9, =0x04000000	 /* size of memory to scrub (CFG_DRAM_SIZE) */
+	ldr	r8, =0xa0000000	 /* base address of SDRAM (CONFIG_SYS_DRAM_BASE) */
+	ldr	r9, =0x04000000	 /* size of memory to scrub (CONFIG_SYS_DRAM_SIZE) */
 	mov	r0, #0		 /* scrub with 0x0000:0000 */
 	mov	r1, #0
 	mov	r2, #0
@@ -255,7 +255,7 @@ mem_init:
 	stmia	r8!, {r0-r7}
 	beq	15f
 	b	10b
-#endif /* CFG_SKIP_DRAM_SCRUB */
+#endif /* CONFIG_SYS_SKIP_DRAM_SCRUB */
 
 15:
 	/* Mask all interrupts */
diff --git a/board/zylonite/nand.c b/board/zylonite/nand.c
index 09bcbb233..899445ee6 100644
--- a/board/zylonite/nand.c
+++ b/board/zylonite/nand.c
@@ -28,26 +28,24 @@
 #include <nand.h>
 #include <asm/arch/pxa-regs.h>
 
-#ifdef CFG_DFC_DEBUG1
+#ifdef CONFIG_SYS_DFC_DEBUG1
 # define DFC_DEBUG1(fmt, args...) printf(fmt, ##args)
 #else
 # define DFC_DEBUG1(fmt, args...)
 #endif
 
-#ifdef CFG_DFC_DEBUG2
+#ifdef CONFIG_SYS_DFC_DEBUG2
 # define DFC_DEBUG2(fmt, args...) printf(fmt, ##args)
 #else
 # define DFC_DEBUG2(fmt, args...)
 #endif
 
-#ifdef CFG_DFC_DEBUG3
+#ifdef CONFIG_SYS_DFC_DEBUG3
 # define DFC_DEBUG3(fmt, args...) printf(fmt, ##args)
 #else
 # define DFC_DEBUG3(fmt, args...)
 #endif
 
-#define MIN(x, y)		((x < y) ? x : y)
-
 /* These really don't belong here, as they are specific to the NAND Model */
 static uint8_t scan_ff_pattern[] = { 0xff, 0xff };
 
@@ -58,14 +56,12 @@ static struct nand_bbt_descr delta_bbt_descr = {
 	.pattern = scan_ff_pattern
 };
 
-static struct nand_oobinfo delta_oob = {
-	.useecc = MTD_NANDECC_AUTOPL_USR, /* MTD_NANDECC_PLACEONLY, */
+static struct nand_ecclayout delta_oob = {
 	.eccbytes = 6,
 	.eccpos = {2, 3, 4, 5, 6, 7},
 	.oobfree = { {8, 2}, {12, 4} }
 };
 
-
 /*
  * not required for Monahans DFC
  */
@@ -213,7 +209,7 @@ static void wait_us(unsigned long us)
 static void dfc_clear_nddb(void)
 {
 	NDCR &= ~NDCR_ND_RUN;
-	wait_us(CFG_NAND_OTHER_TO);
+	wait_us(CONFIG_SYS_NAND_OTHER_TO);
 }
 
 /* wait_event with timeout */
@@ -224,9 +220,9 @@ static unsigned long dfc_wait_event(unsigned long event)
 	if(!event)
 		return 0xff000000;
 	else if(event & (NDSR_CS0_CMDD | NDSR_CS0_BBD))
-		timeout = CFG_NAND_PROG_ERASE_TO * OSCR_CLK_FREQ;
+		timeout = CONFIG_SYS_NAND_PROG_ERASE_TO * OSCR_CLK_FREQ;
 	else
-		timeout = CFG_NAND_OTHER_TO * OSCR_CLK_FREQ;
+		timeout = CONFIG_SYS_NAND_OTHER_TO * OSCR_CLK_FREQ;
 
 	while(1) {
 		ndsr = NDSR;
@@ -249,7 +245,7 @@ static void dfc_new_cmd(void)
 	int retry = 0;
 	unsigned long status;
 
-	while(retry++ <= CFG_NAND_SENDCMD_RETRY) {
+	while(retry++ <= CONFIG_SYS_NAND_SENDCMD_RETRY) {
 		/* Clear NDSR */
 		NDSR = 0xFFF;
 
@@ -440,8 +436,8 @@ int board_nand_init(struct nand_chip *nand)
 	/* turn on the NAND Controller Clock (104 MHz @ D0) */
 	CKENA |= (CKENA_4_NAND | CKENA_9_SMC);
 
-#undef CFG_TIMING_TIGHT
-#ifndef CFG_TIMING_TIGHT
+#undef CONFIG_SYS_TIMING_TIGHT
+#ifndef CONFIG_SYS_TIMING_TIGHT
 	tCH = MIN(((unsigned long) (NAND_TIMING_tCH * DFC_CLK_PER_US) + 1),
 		  DFC_MAX_tCH);
 	tCS = MIN(((unsigned long) (NAND_TIMING_tCS * DFC_CLK_PER_US) + 1),
@@ -480,7 +476,7 @@ int board_nand_init(struct nand_chip *nand)
 		   DFC_MAX_tWHR);
 	tAR = MIN(((unsigned long) (NAND_TIMING_tAR * DFC_CLK_PER_US) - 2),
 		  DFC_MAX_tAR);
-#endif /* CFG_TIMING_TIGHT */
+#endif /* CONFIG_SYS_TIMING_TIGHT */
 
 
 	DFC_DEBUG2("tCH=%u, tCS=%u, tWH=%u, tWP=%u, tRH=%u, tRP=%u, tR=%u, tWHR=%u, tAR=%u.\n", tCH, tCS, tWH, tWP, tRH, tRP, tR, tWHR, tAR);
@@ -545,6 +541,7 @@ int board_nand_init(struct nand_chip *nand)
 	nand->cmd_ctrl = dfc_hwcontrol;
 /*	nand->dev_ready = dfc_device_ready; */
 	nand->ecc.mode = NAND_ECC_SOFT;
+	nand->ecc.layout = &delta_oob;
 	nand->options = NAND_BUSWIDTH_16;
 	nand->waitfunc = dfc_wait;
 	nand->read_byte = dfc_read_byte;
@@ -553,7 +550,6 @@ int board_nand_init(struct nand_chip *nand)
 	nand->write_buf = dfc_write_buf;
 
 	nand->cmdfunc = dfc_cmdfunc;
-/*	nand->autooob = &delta_oob; */
 	nand->badblock_pattern = &delta_bbt_descr;
 	return 0;
 }
diff --git a/board/zylonite/u-boot.lds b/board/zylonite/u-boot.lds
index 14d264a68..7cf9fdf63 100644
--- a/board/zylonite/u-boot.lds
+++ b/board/zylonite/u-boot.lds
@@ -51,6 +51,6 @@ SECTIONS
 
 	. = ALIGN(4);
 	__bss_start = .;
-	.bss (NOLOAD) : { *(.bss) }
+	.bss (NOLOAD) : { *(.bss) . = ALIGN(4); }
 	_end = .;
 }
diff --git a/common/Makefile b/common/Makefile
index 0fe9c8b42..93e396307 100644
--- a/common/Makefile
+++ b/common/Makefile
@@ -42,27 +42,31 @@ COBJS-y += s_record.o
 COBJS-y += serial.o
 COBJS-y += xyzModem.o
 
+# core command
+COBJS-y += cmd_boot.o
+COBJS-y += cmd_bootm.o
+COBJS-y += cmd_nvedit.o
+
 # environment
-COBJS-y += environment.o
 COBJS-y += env_common.o
-COBJS-y += env_dataflash.o
-COBJS-y += env_eeprom.o
-COBJS-y += env_flash.o
-COBJS-y += env_nand.o
-COBJS-y += env_nvram.o
-COBJS-y += env_onenand.o
-COBJS-y += env_sf.o
-COBJS-y += env_nowhere.o
+COBJS-$(CONFIG_ENV_IS_IN_DATAFLASH) += env_dataflash.o
+COBJS-$(CONFIG_ENV_IS_IN_EEPROM) += env_eeprom.o
+COBJS-y += env_embedded.o
+COBJS-$(CONFIG_ENV_IS_IN_FLASH) += env_flash.o
+COBJS-$(CONFIG_ENV_IS_IN_NAND) += env_nand.o
+COBJS-$(CONFIG_ENV_IS_IN_NVRAM) += env_nvram.o
+COBJS-$(CONFIG_ENV_IS_IN_ONENAND) += env_onenand.o
+COBJS-$(CONFIG_ENV_IS_IN_SPI_FLASH) += env_sf.o
+COBJS-$(CONFIG_ENV_IS_NOWHERE) += env_nowhere.o
 
 # command
 COBJS-$(CONFIG_CMD_AMBAPP) += cmd_ambapp.o
-COBJS-$(CONFIG_AUTOSCRIPT)$(CONFIG_CMD_AUTOSCRIPT) += cmd_autoscript.o
+COBJS-$(CONFIG_AUTOSCRIPT) += cmd_autoscript.o
+COBJS-$(CONFIG_CMD_AUTOSCRIPT) += cmd_autoscript.o
 COBJS-$(CONFIG_CMD_BDI) += cmd_bdinfo.o
 COBJS-$(CONFIG_CMD_BEDBUG) += bedbug.o cmd_bedbug.o
 COBJS-$(CONFIG_CMD_BMP) += cmd_bmp.o
-COBJS-y += cmd_boot.o
 COBJS-$(CONFIG_CMD_BOOTLDR) += cmd_bootldr.o
-COBJS-y += cmd_bootm.o
 COBJS-$(CONFIG_CMD_CACHE) += cmd_cache.o
 COBJS-$(CONFIG_CMD_CONSOLE) += cmd_console.o
 COBJS-$(CONFIG_CMD_CPLBINFO) += cmd_cplbinfo.o
@@ -76,27 +80,17 @@ endif
 COBJS-$(CONFIG_CMD_DISPLAY) += cmd_display.o
 COBJS-$(CONFIG_CMD_DOC) += cmd_doc.o
 COBJS-$(CONFIG_CMD_DTT) += cmd_dtt.o
-COBJS-y += cmd_eeprom.o
+COBJS-$(CONFIG_ENV_IS_IN_EEPROM) += cmd_eeprom.o
+COBJS-$(CONFIG_CMD_EEPROM) += cmd_eeprom.o
 COBJS-$(CONFIG_CMD_ELF) += cmd_elf.o
 COBJS-$(CONFIG_CMD_EXT2) += cmd_ext2.o
 COBJS-$(CONFIG_CMD_FAT) += cmd_fat.o
-COBJS-y += cmd_fdc.o
+COBJS-$(CONFIG_CMD_FDC)$(CONFIG_CMD_FDOS) += cmd_fdc.o
 COBJS-$(CONFIG_OF_LIBFDT) += cmd_fdt.o fdt_support.o
 COBJS-$(CONFIG_CMD_FDOS) += cmd_fdos.o
 COBJS-$(CONFIG_CMD_FLASH) += cmd_flash.o
 ifdef CONFIG_FPGA
-COBJS-y += fpga.o
 COBJS-$(CONFIG_CMD_FPGA) += cmd_fpga.o
-COBJS-$(CONFIG_FPGA_SPARTAN2) += spartan2.o
-COBJS-$(CONFIG_FPGA_SPARTAN3) += spartan3.o
-COBJS-$(CONFIG_FPGA_VIRTEX2) += virtex2.o
-COBJS-$(CONFIG_FPGA_XILINX) += xilinx.o
-ifdef CONFIG_FPGA_ALTERA
-COBJS-y += altera.o
-COBJS-$(CONFIG_FPGA_ACEX1K) += ACEX1K.o
-COBJS-$(CONFIG_FPGA_CYCLON2) += cyclon2.o
-COBJS-$(CONFIG_FPGA_STRATIX_II) += stratixII.o
-endif
 endif
 COBJS-$(CONFIG_CMD_I2C) += cmd_i2c.o
 COBJS-$(CONFIG_CMD_IDE) += cmd_ide.o
@@ -107,17 +101,17 @@ COBJS-$(CONFIG_CMD_JFFS2) += cmd_jffs2.o
 COBJS-$(CONFIG_CMD_LICENSE) += cmd_license.o
 COBJS-y += cmd_load.o
 COBJS-$(CONFIG_LOGBUFFER) += cmd_log.o
-COBJS-y += cmd_mac.o
-COBJS-y += cmd_mem.o
+COBJS-$(CONFIG_ID_EEPROM) += cmd_mac.o
+COBJS-$(CONFIG_CMD_MEMORY) += cmd_mem.o
 COBJS-$(CONFIG_CMD_MFSL) += cmd_mfsl.o
-COBJS-$(CONFIG_MII)$(CONFIG_CMD_MII) += miiphyutil.o
+COBJS-$(CONFIG_MII) += miiphyutil.o
+COBJS-$(CONFIG_CMD_MII) += miiphyutil.o
 COBJS-$(CONFIG_CMD_MII) += cmd_mii.o
 COBJS-$(CONFIG_CMD_MISC) += cmd_misc.o
 COBJS-$(CONFIG_CMD_MMC) += cmd_mmc.o
 COBJS-$(CONFIG_MP) += cmd_mp.o
 COBJS-y += cmd_nand.o
 COBJS-$(CONFIG_CMD_NET) += cmd_net.o
-COBJS-y += cmd_nvedit.o
 COBJS-$(CONFIG_CMD_ONENAND) += cmd_onenand.o
 COBJS-$(CONFIG_CMD_OTP) += cmd_otp.o
 ifdef CONFIG_PCI
@@ -134,6 +128,7 @@ COBJS-$(CONFIG_CMD_SETEXPR) += cmd_setexpr.o
 COBJS-$(CONFIG_CMD_SPI) += cmd_spi.o
 COBJS-$(CONFIG_CMD_STRINGS) += cmd_strings.o
 COBJS-$(CONFIG_CMD_TERMINAL) += cmd_terminal.o
+COBJS-$(CONFIG_CMD_UBI) += cmd_ubi.o
 COBJS-$(CONFIG_CMD_UNIVERSE) += cmd_universe.o
 ifdef CONFIG_CMD_USB
 COBJS-y += cmd_usb.o
@@ -142,17 +137,21 @@ COBJS-$(CONFIG_USB_STORAGE) += usb_storage.o
 endif
 COBJS-$(CONFIG_CMD_XIMG) += cmd_ximg.o
 COBJS-$(CONFIG_YAFFS2) += cmd_yaffs2.o
-COBJS-y += cmd_vfd.o
+COBJS-$(CONFIG_VFD) += cmd_vfd.o
+
+# others
+COBJS-$(CONFIG_DDR_SPD) += ddr_spd.o
 COBJS-$(CONFIG_CMD_DOC) += docecc.o
+COBJS-$(CONFIG_CONSOLE_MUX) += iomux.o
 COBJS-y += flash.o
 COBJS-y += kgdb.o
 COBJS-$(CONFIG_LCD) += lcd.o
 COBJS-$(CONFIG_LYNXKDI) += lynxkdi.o
+COBJS-$(CONFIG_UPDATE_TFTP) += update.o
 COBJS-$(CONFIG_USB_KEYBOARD) += usb_kbd.o
-COBJS-$(CONFIG_DDR_SPD) += ddr_spd.o
 
-COBJS-y	+= $(COBJS-yy)
-COBJS	:= $(COBJS-y)
+
+COBJS	:= $(sort $(COBJS-y))
 SRCS	:= $(AOBJS:.o=.S) $(COBJS:.o=.c)
 OBJS	:= $(addprefix $(obj),$(AOBJS) $(COBJS))
 
@@ -163,10 +162,10 @@ all:	$(LIB) $(AOBJS)
 $(LIB): $(obj).depend $(OBJS)
 	$(AR) $(ARFLAGS) $@ $(OBJS)
 
-$(obj)environment.o: $(src)environment.c $(obj)../tools/envcrc
+$(obj)env_embedded.o: $(src)env_embedded.c $(obj)../tools/envcrc
 	$(CC) $(AFLAGS) -Wa,--no-warn \
 		-DENV_CRC=$(shell $(obj)../tools/envcrc) \
-		-c -o $@ $(src)environment.c
+		-c -o $@ $(src)env_embedded.c
 
 $(obj)../tools/envcrc:
 	$(MAKE) -C ../tools
diff --git a/common/cmd_autoscript.c b/common/cmd_autoscript.c
index c2e7e665a..4517ac83c 100644
--- a/common/cmd_autoscript.c
+++ b/common/cmd_autoscript.c
@@ -43,7 +43,7 @@
 #if defined(CONFIG_8xx)
 #include <mpc8xx.h>
 #endif
-#ifdef CFG_HUSH_PARSER
+#ifdef CONFIG_SYS_HUSH_PARSER
 #include <hush.h>
 #endif
 
@@ -164,7 +164,7 @@ autoscript (ulong addr, const char *fit_uname)
 	memmove (cmd, (char *)data, len);
 	*(cmd + len) = 0;
 
-#ifdef CFG_HUSH_PARSER /*?? */
+#ifdef CONFIG_SYS_HUSH_PARSER /*?? */
 	rcode = parse_string_outer (cmd, FLAG_PARSE_SEMICOLON);
 #else
 	{
@@ -180,7 +180,7 @@ autoscript (ulong addr, const char *fit_uname)
 			if (*next == '\n') {
 				*next = '\0';
 				/* run only non-empty commands */
-				if ((next - line) > 1) {
+				if (*line) {
 					debug ("** exec: \"%s\"\n",
 						line);
 					if (run_command (line, 0) < 0) {
@@ -192,6 +192,8 @@ autoscript (ulong addr, const char *fit_uname)
 			}
 			++next;
 		}
+		if (rcode == 0 && *line)
+			rcode = (run_command(line, 0) >= 0);
 	}
 #endif
 	free (cmd);
@@ -209,7 +211,7 @@ do_autoscript (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 
 	/* Find script image */
 	if (argc < 2) {
-		addr = CFG_LOAD_ADDR;
+		addr = CONFIG_SYS_LOAD_ADDR;
 		debug ("*  autoscr: default load address = 0x%08lx\n", addr);
 #if defined(CONFIG_FIT)
 	} else if (fit_parse_subimage (argv[1], load_addr, &addr, &fit_uname)) {
diff --git a/common/cmd_bdinfo.c b/common/cmd_bdinfo.c
index 24ff9b995..667524188 100644
--- a/common/cmd_bdinfo.c
+++ b/common/cmd_bdinfo.c
@@ -117,6 +117,20 @@ int do_bdinfo ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 	}
 #endif
 
+#if defined(CONFIG_HAS_ETH4)
+       puts ("\neth4addr    =");
+       for (i=0; i<6; ++i) {
+		printf ("%c%02X", i ? ':' : ' ', bd->bi_enet4addr[i]);
+	}
+#endif
+
+#if defined(CONFIG_HAS_ETH5)
+       puts ("\neth5addr    =");
+       for (i=0; i<6; ++i) {
+		printf ("%c%02X", i ? ':' : ' ', bd->bi_enet5addr[i]);
+	}
+#endif
+
 #ifdef CONFIG_HERMES
 	print_str ("ethspeed",	    strmhz(buf, bd->bi_ethspeed));
 #endif
@@ -164,7 +178,7 @@ int do_bdinfo ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 	print_num ("flash size",	(ulong)bd->bi_flashsize);
 	print_num ("flash offset",	(ulong)bd->bi_flashoffset);
 
-#if defined(CFG_SRAM_BASE)
+#if defined(CONFIG_SYS_SRAM_BASE)
 	print_num ("sram start",	(ulong)bd->bi_sramstart);
 	print_num ("sram size",		(ulong)bd->bi_sramsize);
 #endif
@@ -193,7 +207,7 @@ int do_bdinfo ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 	print_num ("flash start    ",	(ulong)bd->bi_flashstart);
 	print_num ("flash size     ",	(ulong)bd->bi_flashsize);
 	print_num ("flash offset   ",	(ulong)bd->bi_flashoffset);
-#if defined(CFG_SRAM_BASE)
+#if defined(CONFIG_SYS_SRAM_BASE)
 	print_num ("sram start     ",	(ulong)bd->bi_sramstart);
 	print_num ("sram size      ",	(ulong)bd->bi_sramsize);
 #endif
@@ -223,18 +237,18 @@ int do_bdinfo(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
 	print_num("memstart               ", bd->bi_memstart);
 	print_lnum("memsize                ", bd->bi_memsize);
 	print_num("flashstart             ", bd->bi_flashstart);
-	print_num("CFG_MONITOR_BASE       ", CFG_MONITOR_BASE);
-	print_num("CFG_ENV_ADDR           ", CFG_ENV_ADDR);
-	printf("CFG_RELOC_MONITOR_BASE = 0x%lx (%d)\n", CFG_RELOC_MONITOR_BASE,
-	       CFG_MONITOR_LEN);
-	printf("CFG_MALLOC_BASE        = 0x%lx (%d)\n", CFG_MALLOC_BASE,
-	       CFG_MALLOC_LEN);
-	printf("CFG_INIT_SP_OFFSET     = 0x%lx (%d)\n", CFG_INIT_SP_OFFSET,
-	       CFG_STACK_SIZE);
-	printf("CFG_PROM_OFFSET        = 0x%lx (%d)\n", CFG_PROM_OFFSET,
-	       CFG_PROM_SIZE);
-	printf("CFG_GBL_DATA_OFFSET    = 0x%lx (%d)\n", CFG_GBL_DATA_OFFSET,
-	       CFG_GBL_DATA_SIZE);
+	print_num("CONFIG_SYS_MONITOR_BASE       ", CONFIG_SYS_MONITOR_BASE);
+	print_num("CONFIG_ENV_ADDR           ", CONFIG_ENV_ADDR);
+	printf("CONFIG_SYS_RELOC_MONITOR_BASE = 0x%lx (%d)\n", CONFIG_SYS_RELOC_MONITOR_BASE,
+	       CONFIG_SYS_MONITOR_LEN);
+	printf("CONFIG_SYS_MALLOC_BASE        = 0x%lx (%d)\n", CONFIG_SYS_MALLOC_BASE,
+	       CONFIG_SYS_MALLOC_LEN);
+	printf("CONFIG_SYS_INIT_SP_OFFSET     = 0x%lx (%d)\n", CONFIG_SYS_INIT_SP_OFFSET,
+	       CONFIG_SYS_STACK_SIZE);
+	printf("CONFIG_SYS_PROM_OFFSET        = 0x%lx (%d)\n", CONFIG_SYS_PROM_OFFSET,
+	       CONFIG_SYS_PROM_SIZE);
+	printf("CONFIG_SYS_GBL_DATA_OFFSET    = 0x%lx (%d)\n", CONFIG_SYS_GBL_DATA_OFFSET,
+	       CONFIG_SYS_GBL_DATA_SIZE);
 
 #if defined(CONFIG_CMD_NET)
 	puts("ethaddr                =");
@@ -262,11 +276,11 @@ int do_bdinfo ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 	print_num ("flashstart",	(ulong)bd->bi_flashstart);
 	print_num ("flashsize",		(ulong)bd->bi_flashsize);
 	print_num ("flashoffset",	(ulong)bd->bi_flashoffset);
-#if defined(CFG_INIT_RAM_ADDR)
+#if defined(CONFIG_SYS_INIT_RAM_ADDR)
 	print_num ("sramstart",		(ulong)bd->bi_sramstart);
 	print_num ("sramsize",		(ulong)bd->bi_sramsize);
 #endif
-#if defined(CFG_MBAR)
+#if defined(CONFIG_SYS_MBAR)
 	print_num ("mbar",		bd->bi_mbar_base);
 #endif
 	print_str ("busfreq",		strmhz(buf, bd->bi_busfreq));
diff --git a/common/cmd_bedbug.c b/common/cmd_bedbug.c
index 94f7e0847..e6277c940 100644
--- a/common/cmd_bedbug.c
+++ b/common/cmd_bedbug.c
@@ -13,10 +13,6 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
-#ifndef MAX
-#define MAX(a,b) ((a) > (b) ? (a) : (b))
-#endif
-
 extern void show_regs __P ((struct pt_regs *));
 extern int run_command __P ((const char *, int));
 extern char console_buffer[];
@@ -218,7 +214,7 @@ void bedbug_main_loop (unsigned long addr, struct pt_regs *regs)
 	int flag;		/* Command flags          */
 	int rc = 0;		/* Result from run_command */
 	char prompt_str[20];	/* Prompt string          */
-	static char lastcommand[CFG_CBSIZE] = { 0 };	/* previous command */
+	static char lastcommand[CONFIG_SYS_CBSIZE] = { 0 };	/* previous command */
 	/* -------------------------------------------------- */
 
 	if (bug_ctx.clear)
diff --git a/common/cmd_bmp.c b/common/cmd_bmp.c
index 197e5e871..bc08b2655 100644
--- a/common/cmd_bmp.c
+++ b/common/cmd_bmp.c
@@ -55,19 +55,19 @@ static bmp_image_t *gunzip_bmp(unsigned long addr, unsigned long *lenp)
 	/*
 	 * Decompress bmp image
 	 */
-	len = CFG_VIDEO_LOGO_MAX_SIZE;
-	dst = malloc(CFG_VIDEO_LOGO_MAX_SIZE);
+	len = CONFIG_SYS_VIDEO_LOGO_MAX_SIZE;
+	dst = malloc(CONFIG_SYS_VIDEO_LOGO_MAX_SIZE);
 	if (dst == NULL) {
 		puts("Error: malloc in gunzip failed!\n");
 		return NULL;
 	}
-	if (gunzip(dst, CFG_VIDEO_LOGO_MAX_SIZE, (uchar *)addr, &len) != 0) {
+	if (gunzip(dst, CONFIG_SYS_VIDEO_LOGO_MAX_SIZE, (uchar *)addr, &len) != 0) {
 		free(dst);
 		return NULL;
 	}
-	if (len == CFG_VIDEO_LOGO_MAX_SIZE)
+	if (len == CONFIG_SYS_VIDEO_LOGO_MAX_SIZE)
 		puts("Image could be truncated"
-				" (increase CFG_VIDEO_LOGO_MAX_SIZE)!\n");
+				" (increase CONFIG_SYS_VIDEO_LOGO_MAX_SIZE)!\n");
 
 	bmp = dst;
 
diff --git a/common/cmd_boot.c b/common/cmd_boot.c
index d83f5af53..6024ffeb4 100644
--- a/common/cmd_boot.c
+++ b/common/cmd_boot.c
@@ -63,7 +63,7 @@ int do_go (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 /* -------------------------------------------------------------------- */
 
 U_BOOT_CMD(
-	go, CFG_MAXARGS, 1,	do_go,
+	go, CONFIG_SYS_MAXARGS, 1,	do_go,
 	"go      - start application at address 'addr'\n",
 	"addr [arg ...]\n    - start application at address 'addr'\n"
 	"      passing 'arg' as arguments\n"
diff --git a/common/cmd_bootm.c b/common/cmd_bootm.c
index 0db7b75ba..a8f85e93b 100644
--- a/common/cmd_bootm.c
+++ b/common/cmd_bootm.c
@@ -34,13 +34,14 @@
 #include <bzlib.h>
 #include <environment.h>
 #include <lmb.h>
+#include <linux/ctype.h>
 #include <asm/byteorder.h>
 
 #if defined(CONFIG_CMD_USB)
 #include <usb.h>
 #endif
 
-#ifdef CFG_HUSH_PARSER
+#ifdef CONFIG_SYS_HUSH_PARSER
 #include <hush.h>
 #endif
 
@@ -50,11 +51,18 @@
 #include <fdt_support.h>
 #endif
 
+#ifdef CONFIG_LZMA
+#define _7ZIP_BYTE_DEFINED /* Byte already defined by zlib */
+#include <lzma/LzmaTypes.h>
+#include <lzma/LzmaDecode.h>
+#include <lzma/LzmaTools.h>
+#endif /* CONFIG_LZMA */
+
 DECLARE_GLOBAL_DATA_PTR;
 
 extern int gunzip (void *dst, int dstlen, unsigned char *src, unsigned long *lenp);
-#ifndef CFG_BOOTM_LEN
-#define CFG_BOOTM_LEN	0x800000	/* use 8MByte as default max gunzip size */
+#ifndef CONFIG_SYS_BOOTM_LEN
+#define CONFIG_SYS_BOOTM_LEN	0x800000	/* use 8MByte as default max gunzip size */
 #endif
 
 #ifdef CONFIG_BZIP2
@@ -95,24 +103,56 @@ extern int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
 typedef int boot_os_fn (int flag, int argc, char *argv[],
 			bootm_headers_t *images); /* pointers to os/initrd/fdt */
 
+#define CONFIG_BOOTM_LINUX 1
+#define CONFIG_BOOTM_NETBSD 1
+#define CONFIG_BOOTM_RTEMS 1
+
+#ifdef CONFIG_BOOTM_LINUX
 extern boot_os_fn do_bootm_linux;
+#endif
+#ifdef CONFIG_BOOTM_NETBSD
 static boot_os_fn do_bootm_netbsd;
+#endif
 #if defined(CONFIG_LYNXKDI)
 static boot_os_fn do_bootm_lynxkdi;
 extern void lynxkdi_boot (image_header_t *);
 #endif
+#ifdef CONFIG_BOOTM_RTEMS
 static boot_os_fn do_bootm_rtems;
+#endif
 #if defined(CONFIG_CMD_ELF)
 static boot_os_fn do_bootm_vxworks;
 static boot_os_fn do_bootm_qnxelf;
 int do_bootvx (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
 int do_bootelf (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
 #endif
-#if defined(CONFIG_ARTOS) && defined(CONFIG_PPC)
-static boot_os_fn do_bootm_artos;
+#if defined(CONFIG_INTEGRITY)
+static boot_os_fn do_bootm_integrity;
+#endif
+
+boot_os_fn * boot_os[] = {
+#ifdef CONFIG_BOOTM_LINUX
+	[IH_OS_LINUX] = do_bootm_linux,
+#endif
+#ifdef CONFIG_BOOTM_NETBSD
+	[IH_OS_NETBSD] = do_bootm_netbsd,
+#endif
+#ifdef CONFIG_LYNXKDI
+	[IH_OS_LYNXOS] = do_bootm_lynxkdi,
+#endif
+#ifdef CONFIG_BOOTM_RTEMS
+	[IH_OS_RTEMS] = do_bootm_rtems,
+#endif
+#if defined(CONFIG_CMD_ELF)
+	[IH_OS_VXWORKS] = do_bootm_vxworks,
+	[IH_OS_QNX] = do_bootm_qnxelf,
+#endif
+#ifdef CONFIG_INTEGRITY
+	[IH_OS_INTEGRITY] = do_bootm_integrity,
 #endif
+};
 
-ulong load_addr = CFG_LOAD_ADDR;	/* Default Load Address */
+ulong load_addr = CONFIG_SYS_LOAD_ADDR;	/* Default Load Address */
 static bootm_headers_t images;		/* pointers to os/initrd/fdt images */
 
 void __board_lmb_reserve(struct lmb *lmb)
@@ -121,6 +161,12 @@ void __board_lmb_reserve(struct lmb *lmb)
 }
 void board_lmb_reserve(struct lmb *lmb) __attribute__((weak, alias("__board_lmb_reserve")));
 
+void __arch_lmb_reserve(struct lmb *lmb)
+{
+	/* please define platform specific arch_lmb_reserve() */
+}
+void arch_lmb_reserve(struct lmb *lmb) __attribute__((weak, alias("__arch_lmb_reserve")));
+
 #if defined(__ARM__)
   #define IH_INITRD_ARCH IH_ARCH_ARM
 #elif defined(__avr32__)
@@ -166,6 +212,7 @@ static int bootm_start(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 
 	lmb_add(&images.lmb, (phys_addr_t)mem_start, mem_size);
 
+	arch_lmb_reserve(&images.lmb);
 	board_lmb_reserve(&images.lmb);
 
 	/* get kernel image header, start address and length */
@@ -246,11 +293,12 @@ static int bootm_start(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 		ret = boot_get_ramdisk (argc, argv, &images, IH_INITRD_ARCH,
 				&images.rd_start, &images.rd_end);
 		if (ret) {
-			puts ("Ramdisk image is corrupt\n");
+			puts ("Ramdisk image is corrupt or invalid\n");
 			return 1;
 		}
 
 #if defined(CONFIG_OF_LIBFDT)
+#if defined(CONFIG_PPC) || defined(CONFIG_M68K) || defined(CONFIG_SPARC)
 		/* find flattened device tree */
 		ret = boot_get_fdt (flag, argc, argv, &images,
 				    &images.ft_addr, &images.ft_len);
@@ -261,10 +309,11 @@ static int bootm_start(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 
 		set_working_fdt_addr(images.ft_addr);
 #endif
+#endif
 	}
 
 	images.os.start = (ulong)os_hdr;
-	images.valid = 1;
+	images.state = BOOTM_STATE_START;
 
 	return 0;
 }
@@ -280,7 +329,7 @@ static int bootm_load_os(image_info_t os, ulong *load_end, int boot_progress)
 	ulong blob_end = os.end;
 	ulong image_start = os.image_start;
 	ulong image_len = os.image_len;
-	uint unc_len = CFG_BOOTM_LEN;
+	uint unc_len = CONFIG_SYS_BOOTM_LEN;
 
 	const char *type_name = genimg_get_type_name (os.type);
 
@@ -320,7 +369,7 @@ static int bootm_load_os(image_info_t os, ulong *load_end, int boot_progress)
 		 */
 		int i = BZ2_bzBuffToBuffDecompress ((char*)load,
 					&unc_len, (char *)image_start, image_len,
-					CFG_MALLOC_LEN < (4096 * 1024), 0);
+					CONFIG_SYS_MALLOC_LEN < (4096 * 1024), 0);
 		if (i != BZ_OK) {
 			printf ("BUNZIP2: uncompress or overwrite error %d "
 				"- must RESET board to recover\n", i);
@@ -332,18 +381,34 @@ static int bootm_load_os(image_info_t os, ulong *load_end, int boot_progress)
 		*load_end = load + unc_len;
 		break;
 #endif /* CONFIG_BZIP2 */
+#ifdef CONFIG_LZMA
+	case IH_COMP_LZMA:
+		printf ("   Uncompressing %s ... ", type_name);
+
+		int ret = lzmaBuffToBuffDecompress(
+			(unsigned char *)load, &unc_len,
+			(unsigned char *)image_start, image_len);
+		if (ret != LZMA_RESULT_OK) {
+			printf ("LZMA: uncompress or overwrite error %d "
+				"- must RESET board to recover\n", ret);
+			show_boot_progress (-6);
+			return BOOTM_ERR_RESET;
+		}
+		*load_end = load + unc_len;
+		break;
+#endif /* CONFIG_LZMA */
 	default:
 		printf ("Unimplemented compression type %d\n", comp);
 		return BOOTM_ERR_UNIMPLEMENTED;
 	}
 	puts ("OK\n");
-	debug ("   kernel loaded at 0x%08lx, end = 0x%08lx\n", load, load_end);
+	debug ("   kernel loaded at 0x%08lx, end = 0x%08lx\n", load, *load_end);
 	if (boot_progress)
 		show_boot_progress (7);
 
 	if ((load < blob_end) && (*load_end > blob_start)) {
 		debug ("images.os.start = 0x%lX, images.os.end = 0x%lx\n", blob_start, blob_end);
-		debug ("images.os.load = 0x%lx, load_end = 0x%lx\n", load, load_end);
+		debug ("images.os.load = 0x%lx, load_end = 0x%lx\n", load, *load_end);
 
 		return BOOTM_ERR_OVERLAP;
 	}
@@ -351,17 +416,160 @@ static int bootm_load_os(image_info_t os, ulong *load_end, int boot_progress)
 	return 0;
 }
 
+/* we overload the cmd field with our state machine info instead of a
+ * function pointer */
+cmd_tbl_t cmd_bootm_sub[] = {
+	U_BOOT_CMD_MKENT(start, 0, 1, (void *)BOOTM_STATE_START, "", ""),
+	U_BOOT_CMD_MKENT(loados, 0, 1, (void *)BOOTM_STATE_LOADOS, "", ""),
+#if defined(CONFIG_PPC) || defined(CONFIG_M68K) || defined(CONFIG_SPARC)
+	U_BOOT_CMD_MKENT(ramdisk, 0, 1, (void *)BOOTM_STATE_RAMDISK, "", ""),
+#endif
+#ifdef CONFIG_OF_LIBFDT
+	U_BOOT_CMD_MKENT(fdt, 0, 1, (void *)BOOTM_STATE_FDT, "", ""),
+#endif
+	U_BOOT_CMD_MKENT(bdt, 0, 1, (void *)BOOTM_STATE_OS_BD_T, "", ""),
+	U_BOOT_CMD_MKENT(cmdline, 0, 1, (void *)BOOTM_STATE_OS_CMDLINE, "", ""),
+	U_BOOT_CMD_MKENT(prep, 0, 1, (void *)BOOTM_STATE_OS_PREP, "", ""),
+	U_BOOT_CMD_MKENT(go, 0, 1, (void *)BOOTM_STATE_OS_GO, "", ""),
+};
+
+int do_bootm_subcommand (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+	int ret = 0;
+	int state;
+	cmd_tbl_t *c;
+	boot_os_fn *boot_fn;
+
+	c = find_cmd_tbl(argv[1], &cmd_bootm_sub[0], ARRAY_SIZE(cmd_bootm_sub));
+
+	if (c) {
+		state = (int)c->cmd;
+
+		/* treat start special since it resets the state machine */
+		if (state == BOOTM_STATE_START) {
+			argc--;
+			argv++;
+			return bootm_start(cmdtp, flag, argc, argv);
+		}
+	}
+	/* Unrecognized command */
+	else {
+		printf ("Usage:\n%s\n", cmdtp->usage);
+		return 1;
+	}
+
+	if (images.state >= state) {
+		printf ("Trying to execute a command out of order\n");
+		printf ("Usage:\n%s\n", cmdtp->usage);
+		return 1;
+	}
+
+	images.state |= state;
+	boot_fn = boot_os[images.os.os];
+
+	switch (state) {
+		ulong load_end;
+		case BOOTM_STATE_START:
+			/* should never occur */
+			break;
+		case BOOTM_STATE_LOADOS:
+			ret = bootm_load_os(images.os, &load_end, 0);
+			if (ret)
+				return ret;
+
+			lmb_reserve(&images.lmb, images.os.load,
+					(load_end - images.os.load));
+			break;
+#if defined(CONFIG_PPC) || defined(CONFIG_M68K) || defined(CONFIG_SPARC)
+		case BOOTM_STATE_RAMDISK:
+		{
+			ulong rd_len = images.rd_end - images.rd_start;
+			char str[17];
+
+			ret = boot_ramdisk_high(&images.lmb, images.rd_start,
+				rd_len, &images.initrd_start, &images.initrd_end);
+			if (ret)
+				return ret;
+
+			sprintf(str, "%lx", images.initrd_start);
+			setenv("initrd_start", str);
+			sprintf(str, "%lx", images.initrd_end);
+			setenv("initrd_end", str);
+		}
+			break;
+#endif
+#ifdef CONFIG_OF_LIBFDT
+		case BOOTM_STATE_FDT:
+		{
+			ulong bootmap_base = getenv_bootm_low();
+			ret = boot_relocate_fdt(&images.lmb, bootmap_base,
+				&images.ft_addr, &images.ft_len);
+			break;
+		}
+#endif
+		case BOOTM_STATE_OS_CMDLINE:
+			ret = boot_fn(BOOTM_STATE_OS_CMDLINE, argc, argv, &images);
+			if (ret)
+				printf ("cmdline subcommand not supported\n");
+			break;
+		case BOOTM_STATE_OS_BD_T:
+			ret = boot_fn(BOOTM_STATE_OS_BD_T, argc, argv, &images);
+			if (ret)
+				printf ("bdt subcommand not supported\n");
+			break;
+		case BOOTM_STATE_OS_PREP:
+			ret = boot_fn(BOOTM_STATE_OS_PREP, argc, argv, &images);
+			if (ret)
+				printf ("prep subcommand not supported\n");
+			break;
+		case BOOTM_STATE_OS_GO:
+			disable_interrupts();
+			boot_fn(BOOTM_STATE_OS_GO, argc, argv, &images);
+			break;
+	}
+
+	return ret;
+}
+
 /*******************************************************************/
 /* bootm - boot application image from image in memory */
 /*******************************************************************/
+static int relocated = 0;
+
 int do_bootm (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 {
-
 	ulong		iflag;
 	ulong		load_end = 0;
 	int		ret;
+	boot_os_fn	*boot_fn;
+
+	/* relocate boot function table */
+	if (!relocated) {
+		int i;
+		for (i = 0; i < ARRAY_SIZE(boot_os); i++)
+			boot_os[i] += gd->reloc_off;
+		relocated = 1;
+	}
+
+	/* determine if we have a sub command */
+	if (argc > 1) {
+		char *endp;
+
+		simple_strtoul(argv[1], &endp, 16);
+		/* endp pointing to NULL means that argv[1] was just a
+		 * valid number, pass it along to the normal bootm processing
+		 *
+		 * If endp is ':' or '#' assume a FIT identifier so pass
+		 * along for normal processing.
+		 *
+		 * Right now we assume the first arg should never be '-'
+		 */
+		if ((*endp != 0) && (*endp != ':') && (*endp != '#'))
+			return do_bootm_subcommand(cmdtp, flag, argc, argv);
+	}
 
-	bootm_start(cmdtp, flag, argc, argv);
+	if (bootm_start(cmdtp, flag, argc, argv))
+		return 1;
 
 	/*
 	 * We have reached the point of no return: we are going to
@@ -421,45 +629,13 @@ int do_bootm (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 
 	show_boot_progress (8);
 
-	switch (images.os.os) {
-	default:			/* handled by (original) Linux case */
-	case IH_OS_LINUX:
 #ifdef CONFIG_SILENT_CONSOLE
-	    fixup_silent_linux();
-#endif
-	    do_bootm_linux (0, argc, argv, &images);
-	    break;
-
-	case IH_OS_NETBSD:
-	    do_bootm_netbsd (0, argc, argv, &images);
-	    break;
-
-#ifdef CONFIG_LYNXKDI
-	case IH_OS_LYNXOS:
-	    do_bootm_lynxkdi (0, argc, argv, &images);
-	    break;
+	if (images.os.os == IH_OS_LINUX)
+		fixup_silent_linux();
 #endif
 
-	case IH_OS_RTEMS:
-	    do_bootm_rtems (0, argc, argv, &images);
-	    break;
-
-#if defined(CONFIG_CMD_ELF)
-	case IH_OS_VXWORKS:
-	    do_bootm_vxworks (0, argc, argv, &images);
-	    break;
-
-	case IH_OS_QNX:
-	    do_bootm_qnxelf (0, argc, argv, &images);
-	    break;
-#endif
-
-#ifdef CONFIG_ARTOS
-	case IH_OS_ARTOS:
-	    do_bootm_artos (0, argc, argv, &images);
-	    break;
-#endif
-	}
+	boot_fn = boot_os[images.os.os];
+	boot_fn(0, argc, argv, &images);
 
 	show_boot_progress (-9);
 #ifdef DEBUG
@@ -736,7 +912,7 @@ static void *boot_get_kernel (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]
 }
 
 U_BOOT_CMD(
-	bootm,	CFG_MAXARGS,	1,	do_bootm,
+	bootm,	CONFIG_SYS_MAXARGS,	1,	do_bootm,
 	"bootm   - boot application image from memory\n",
 	"[addr [arg ...]]\n    - boot application image stored in memory\n"
 	"\tpassing arguments 'arg ...'; when booting a Linux kernel,\n"
@@ -756,6 +932,21 @@ U_BOOT_CMD(
 	"\tUse iminfo command to get the list of existing component\n"
 	"\timages and configurations.\n"
 #endif
+	"\nSub-commands to do part of the bootm sequence.  The sub-commands "
+	"must be\n"
+	"issued in the order below (it's ok to not issue all sub-commands):\n"
+	"\tstart [addr [arg ...]]\n"
+	"\tloados  - load OS image\n"
+#if defined(CONFIG_PPC) || defined(CONFIG_M68K) || defined(CONFIG_SPARC)
+	"\tramdisk - relocate initrd, set env initrd_start/initrd_end\n"
+#endif
+#if defined(CONFIG_OF_LIBFDT)
+	"\tfdt     - relocate flat device tree\n"
+#endif
+	"\tbdt     - OS specific bd_t processing\n"
+	"\tcmdline - OS specific command line processing/setup\n"
+	"\tprep    - OS specific prep before relocation or go\n"
+	"\tgo      - start OS\n"
 );
 
 /*******************************************************************/
@@ -766,7 +957,7 @@ int do_bootd (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 {
 	int rcode = 0;
 
-#ifndef CFG_HUSH_PARSER
+#ifndef CONFIG_SYS_HUSH_PARSER
 	if (run_command (getenv ("bootcmd"), flag) < 0)
 		rcode = 1;
 #else
@@ -853,6 +1044,12 @@ static int image_info (ulong addr)
 		}
 
 		fit_print_contents (hdr);
+
+		if (!fit_all_image_check_hashes (hdr)) {
+			puts ("Bad hash in FIT image!\n");
+			return 1;
+		}
+
 		return 0;
 #endif
 	default:
@@ -864,7 +1061,7 @@ static int image_info (ulong addr)
 }
 
 U_BOOT_CMD(
-	iminfo,	CFG_MAXARGS,	1,	do_iminfo,
+	iminfo,	CONFIG_SYS_MAXARGS,	1,	do_iminfo,
 	"iminfo  - print header information for application image\n",
 	"addr [addr ...]\n"
 	"    - print header information for application image starting at\n"
@@ -885,7 +1082,7 @@ int do_imls (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 	void *hdr;
 
 	for (i = 0, info = &flash_info[0];
-		i < CFG_MAX_FLASH_BANKS; ++i, ++info) {
+		i < CONFIG_SYS_MAX_FLASH_BANKS; ++i, ++info) {
 
 		if (info->flash_id == FLASH_UNKNOWN)
 			goto next_bank;
@@ -980,6 +1177,7 @@ static void fixup_silent_linux ()
 /* OS booting routines */
 /*******************************************************************/
 
+#ifdef CONFIG_BOOTM_NETBSD
 static int do_bootm_netbsd (int flag, int argc, char *argv[],
 			    bootm_headers_t *images)
 {
@@ -989,6 +1187,9 @@ static int do_bootm_netbsd (int flag, int argc, char *argv[],
 	char *consdev;
 	char *cmdline;
 
+	if ((flag != 0) && (flag != BOOTM_STATE_OS_GO))
+		return 1;
+
 #if defined(CONFIG_FIT)
 	if (!images->legacy_hdr_valid) {
 		fit_unsupported_reset ("NetBSD");
@@ -1062,6 +1263,7 @@ static int do_bootm_netbsd (int flag, int argc, char *argv[],
 
 	return 1;
 }
+#endif /* CONFIG_BOOTM_NETBSD*/
 
 #ifdef CONFIG_LYNXKDI
 static int do_bootm_lynxkdi (int flag, int argc, char *argv[],
@@ -1069,6 +1271,9 @@ static int do_bootm_lynxkdi (int flag, int argc, char *argv[],
 {
 	image_header_t *hdr = &images->legacy_hdr_os_copy;
 
+	if ((flag != 0) && (flag != BOOTM_STATE_OS_GO))
+		return 1;
+
 #if defined(CONFIG_FIT)
 	if (!images->legacy_hdr_valid) {
 		fit_unsupported_reset ("Lynx");
@@ -1082,11 +1287,15 @@ static int do_bootm_lynxkdi (int flag, int argc, char *argv[],
 }
 #endif /* CONFIG_LYNXKDI */
 
+#ifdef CONFIG_BOOTM_RTEMS
 static int do_bootm_rtems (int flag, int argc, char *argv[],
 			   bootm_headers_t *images)
 {
 	void (*entry_point)(bd_t *);
 
+	if ((flag != 0) && (flag != BOOTM_STATE_OS_GO))
+		return 1;
+
 #if defined(CONFIG_FIT)
 	if (!images->legacy_hdr_valid) {
 		fit_unsupported_reset ("RTEMS");
@@ -1109,6 +1318,7 @@ static int do_bootm_rtems (int flag, int argc, char *argv[],
 
 	return 1;
 }
+#endif /* CONFIG_BOOTM_RTEMS */
 
 #if defined(CONFIG_CMD_ELF)
 static int do_bootm_vxworks (int flag, int argc, char *argv[],
@@ -1116,6 +1326,9 @@ static int do_bootm_vxworks (int flag, int argc, char *argv[],
 {
 	char str[80];
 
+	if ((flag != 0) && (flag != BOOTM_STATE_OS_GO))
+		return 1;
+
 #if defined(CONFIG_FIT)
 	if (!images->legacy_hdr_valid) {
 		fit_unsupported_reset ("VxWorks");
@@ -1136,6 +1349,9 @@ static int do_bootm_qnxelf(int flag, int argc, char *argv[],
 	char *local_args[2];
 	char str[16];
 
+	if ((flag != 0) && (flag != BOOTM_STATE_OS_GO))
+		return 1;
+
 #if defined(CONFIG_FIT)
 	if (!images->legacy_hdr_valid) {
 		fit_unsupported_reset ("QNX");
@@ -1152,92 +1368,34 @@ static int do_bootm_qnxelf(int flag, int argc, char *argv[],
 }
 #endif
 
-#if defined(CONFIG_ARTOS) && defined(CONFIG_PPC)
-static int do_bootm_artos (int flag, int argc, char *argv[],
+#ifdef CONFIG_INTEGRITY
+static int do_bootm_integrity (int flag, int argc, char *argv[],
 			   bootm_headers_t *images)
 {
-	ulong top;
-	char *s, *cmdline;
-	char **fwenv, **ss;
-	int i, j, nxt, len, envno, envsz;
-	bd_t *kbd;
-	void (*entry)(bd_t *bd, char *cmdline, char **fwenv, ulong top);
+	void (*entry_point)(void);
+
+	if ((flag != 0) && (flag != BOOTM_STATE_OS_GO))
+		return 1;
 
 #if defined(CONFIG_FIT)
 	if (!images->legacy_hdr_valid) {
-		fit_unsupported_reset ("ARTOS");
+		fit_unsupported_reset ("INTEGRITY");
 		return 1;
 	}
 #endif
 
-	/*
-	 * Booting an ARTOS kernel image + application
-	 */
+	entry_point = (void (*)(void))images->ep;
 
-	/* this used to be the top of memory, but was wrong... */
-#ifdef CONFIG_PPC
-	/* get stack pointer */
-	asm volatile ("mr %0,1" : "=r"(top) );
-#endif
-	debug ("## Current stack ends at 0x%08lX ", top);
-
-	top -= 2048;		/* just to be sure */
-	if (top > CFG_BOOTMAPSZ)
-		top = CFG_BOOTMAPSZ;
-	top &= ~0xF;
-
-	debug ("=> set upper limit to 0x%08lX\n", top);
-
-	/* first check the artos specific boot args, then the linux args*/
-	if ((s = getenv( "abootargs")) == NULL && (s = getenv ("bootargs")) == NULL)
-		s = "";
-
-	/* get length of cmdline, and place it */
-	len = strlen (s);
-	top = (top - (len + 1)) & ~0xF;
-	cmdline = (char *)top;
-	debug ("## cmdline at 0x%08lX ", top);
-	strcpy (cmdline, s);
-
-	/* copy bdinfo */
-	top = (top - sizeof (bd_t)) & ~0xF;
-	debug ("## bd at 0x%08lX ", top);
-	kbd = (bd_t *)top;
-	memcpy (kbd, gd->bd, sizeof (bd_t));
-
-	/* first find number of env entries, and their size */
-	envno = 0;
-	envsz = 0;
-	for (i = 0; env_get_char (i) != '\0'; i = nxt + 1) {
-		for (nxt = i; env_get_char (nxt) != '\0'; ++nxt)
-			;
-		envno++;
-		envsz += (nxt - i) + 1;	/* plus trailing zero */
-	}
-	envno++;	/* plus the terminating zero */
-	debug ("## %u envvars total size %u ", envno, envsz);
-
-	top = (top - sizeof (char **) * envno) & ~0xF;
-	fwenv = (char **)top;
-	debug ("## fwenv at 0x%08lX ", top);
-
-	top = (top - envsz) & ~0xF;
-	s = (char *)top;
-	ss = fwenv;
-
-	/* now copy them */
-	for (i = 0; env_get_char (i) != '\0'; i = nxt + 1) {
-		for (nxt = i; env_get_char (nxt) != '\0'; ++nxt)
-			;
-		*ss++ = s;
-		for (j = i; j < nxt; ++j)
-			*s++ = env_get_char (j);
-		*s++ = '\0';
-	}
-	*ss++ = NULL;	/* terminate */
+	printf ("## Transferring control to INTEGRITY (at address %08lx) ...\n",
+		(ulong)entry_point);
+
+	show_boot_progress (15);
 
-	entry = (void (*)(bd_t *, char *, char **, ulong))images->ep;
-	(*entry) (kbd, cmdline, fwenv, top);
+	/*
+	 * INTEGRITY Parameters:
+	 *   None
+	 */
+	(*entry_point)();
 
 	return 1;
 }
diff --git a/common/cmd_date.c b/common/cmd_date.c
index 751159847..b4d9649bd 100644
--- a/common/cmd_date.c
+++ b/common/cmd_date.c
@@ -47,7 +47,7 @@ int do_date (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 
 	/* switch to correct I2C bus */
 	old_bus = I2C_GET_BUS();
-	I2C_SET_BUS(CFG_RTC_BUS_NUM);
+	I2C_SET_BUS(CONFIG_SYS_RTC_BUS_NUM);
 
 	switch (argc) {
 	case 2:			/* set date & time */
@@ -56,18 +56,30 @@ int do_date (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 			rtc_reset ();
 		} else {
 			/* initialize tm with current time */
-			rtc_get (&tm);
-			/* insert new date & time */
-			if (mk_date (argv[1], &tm) != 0) {
-				puts ("## Bad date format\n");
-				break;
+			rcode = rtc_get (&tm);
+
+			if(!rcode) {
+				/* insert new date & time */
+				if (mk_date (argv[1], &tm) != 0) {
+					puts ("## Bad date format\n");
+					break;
+				}
+				/* and write to RTC */
+				rcode = rtc_set (&tm);
+				if(rcode)
+					puts("## Set date failled\n");
+			} else {
+				puts("## Get date failled\n");
 			}
-			/* and write to RTC */
-			rtc_set (&tm);
 		}
 		/* FALL TROUGH */
 	case 1:			/* get date & time */
-		rtc_get (&tm);
+		rcode = rtc_get (&tm);
+
+		if (rcode) {
+			puts("## Get date failled\n");
+			break;
+		}
 
 		printf ("Date: %4d-%02d-%02d (%sday)    Time: %2d:%02d:%02d\n",
 			tm.tm_year, tm.tm_mon, tm.tm_mday,
diff --git a/common/cmd_diag.c b/common/cmd_diag.c
index 82d5ad313..13d4225fb 100644
--- a/common/cmd_diag.c
+++ b/common/cmd_diag.c
@@ -65,7 +65,7 @@ int do_diag (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
 /***************************************************/
 
 U_BOOT_CMD(
-	diag,	CFG_MAXARGS,	0,	do_diag,
+	diag,	CONFIG_SYS_MAXARGS,	0,	do_diag,
 	"diag    - perform board diagnostics\n",
 	     "    - print list of available tests\n"
 	"diag [test1 [test2]]\n"
diff --git a/common/cmd_display.c b/common/cmd_display.c
index a29345c6b..982e09dab 100644
--- a/common/cmd_display.c
+++ b/common/cmd_display.c
@@ -36,7 +36,7 @@ int do_display (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 	int pos;
 
 	/* Clear display */
-	*((volatile char*)(CFG_DISP_CWORD)) = CWORD_CLEAR;
+	*((volatile char*)(CONFIG_SYS_DISP_CWORD)) = CWORD_CLEAR;
 	udelay(1000 * CLEAR_DELAY);
 
 	if (argc < 2)
@@ -46,14 +46,14 @@ int do_display (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 		char *p = argv[i], c;
 
 		if (i > 1) {
-			*((volatile uchar *) (CFG_DISP_CHR_RAM + pos++)) = ' ';
+			*((volatile uchar *) (CONFIG_SYS_DISP_CHR_RAM + pos++)) = ' ';
 #ifdef DEBUG_DISP
 			putc(' ');
 #endif
 		}
 
 		while ((c = *p++) != '\0' && pos < DISP_SIZE) {
-			*((volatile uchar *) (CFG_DISP_CHR_RAM + pos++)) = c;
+			*((volatile uchar *) (CONFIG_SYS_DISP_CHR_RAM + pos++)) = c;
 #ifdef DEBUG_DISP
 			putc(c);
 #endif
@@ -70,7 +70,7 @@ int do_display (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 /***************************************************/
 
 U_BOOT_CMD(
-	display,	CFG_MAXARGS,	1,	do_display,
+	display,	CONFIG_SYS_MAXARGS,	1,	do_display,
 	"display- display string on dot matrix display\n",
 	"[<string>]\n"
 	"    - with <string> argument: display <string> on dot matrix display\n"
diff --git a/common/cmd_doc.c b/common/cmd_doc.c
index a55ca41d9..02502cc81 100644
--- a/common/cmd_doc.c
+++ b/common/cmd_doc.c
@@ -20,19 +20,19 @@
  * TODO: must be implemented and tested by someone with HW
  */
 #if 0
-#ifdef CFG_DOC_SUPPORT_2000
+#ifdef CONFIG_SYS_DOC_SUPPORT_2000
 #define DoC_is_2000(doc) (doc->ChipID == DOC_ChipID_Doc2k)
 #else
 #define DoC_is_2000(doc) (0)
 #endif
 
-#ifdef CFG_DOC_SUPPORT_MILLENNIUM
+#ifdef CONFIG_SYS_DOC_SUPPORT_MILLENNIUM
 #define DoC_is_Millennium(doc) (doc->ChipID == DOC_ChipID_DocMil)
 #else
 #define DoC_is_Millennium(doc) (0)
 #endif
 
-/* CFG_DOC_PASSIVE_PROBE:
+/* CONFIG_SYS_DOC_PASSIVE_PROBE:
    In order to ensure that the BIOS checksum is correct at boot time, and
    hence that the onboard BIOS extension gets executed, the DiskOnChip
    goes into reset mode when it is read sequentially: all registers
@@ -48,7 +48,7 @@
    the machine.
 
    If you have this problem, uncomment the following line:
-#define CFG_DOC_PASSIVE_PROBE
+#define CONFIG_SYS_DOC_PASSIVE_PROBE
 */
 
 #undef	DOC_DEBUG
@@ -56,7 +56,7 @@
 #undef	PSYCHO_DEBUG
 #undef	NFTL_DEBUG
 
-static struct DiskOnChip doc_dev_desc[CFG_MAX_DOC_DEVICE];
+static struct DiskOnChip doc_dev_desc[CONFIG_SYS_MAX_DOC_DEVICE];
 
 /* Current DOC Device	*/
 static int curr_device = -1;
@@ -104,7 +104,7 @@ int do_doc (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 
 		putc ('\n');
 
-		for (i=0; i<CFG_MAX_DOC_DEVICE; ++i) {
+		for (i=0; i<CONFIG_SYS_MAX_DOC_DEVICE; ++i) {
 			if(doc_dev_desc[i].ChipID == DOC_ChipID_UNKNOWN)
 				continue; /* list only known devices */
 			printf ("Device %d: ", i);
@@ -113,7 +113,7 @@ int do_doc (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 		return 0;
 
 	} else if (strcmp(argv[1],"device") == 0) {
-		if ((curr_device < 0) || (curr_device >= CFG_MAX_DOC_DEVICE)) {
+		if ((curr_device < 0) || (curr_device >= CONFIG_SYS_MAX_DOC_DEVICE)) {
 			puts ("\nno devices available\n");
 			return 1;
 		}
@@ -128,7 +128,7 @@ int do_doc (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 		int dev = (int)simple_strtoul(argv[2], NULL, 10);
 
 		printf ("\nDevice %d: ", dev);
-		if (dev >= CFG_MAX_DOC_DEVICE) {
+		if (dev >= CONFIG_SYS_MAX_DOC_DEVICE) {
 			puts ("unknown device\n");
 			return 1;
 		}
@@ -218,7 +218,7 @@ int do_docboot (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 	show_boot_progress (34);
 	switch (argc) {
 	case 1:
-		addr = CFG_LOAD_ADDR;
+		addr = CONFIG_SYS_LOAD_ADDR;
 		boot_device = getenv ("bootdevice");
 		break;
 	case 2:
@@ -250,7 +250,7 @@ int do_docboot (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 
 	dev = simple_strtoul(boot_device, &ep, 16);
 
-	if ((dev >= CFG_MAX_DOC_DEVICE) ||
+	if ((dev >= CONFIG_SYS_MAX_DOC_DEVICE) ||
 	    (doc_dev_desc[dev].ChipID == DOC_ChipID_UNKNOWN)) {
 		printf ("\n** Device %d not available\n", dev);
 		show_boot_progress (-37);
@@ -439,7 +439,7 @@ static int _DoC_WaitReady(struct DiskOnChip *doc)
 
 	/* Out-of-line routine to wait for chip response */
 	while (!(ReadDOC(docptr, CDSNControl) & CDSN_CTRL_FR_B)) {
-#ifdef CFG_DOC_SHORT_TIMEOUT
+#ifdef CONFIG_SYS_DOC_SHORT_TIMEOUT
 		/* it seems that after a certain time the DoC deasserts
 		 * the CDSN_CTRL_FR_B although it is not ready...
 		 * using a short timout solve this (timer increments every ms) */
@@ -1525,12 +1525,12 @@ static inline int doccheck(unsigned long potential, unsigned long physadr)
 
 	/* Routine copied from the Linux DOC driver */
 
-#ifdef CFG_DOCPROBE_55AA
+#ifdef CONFIG_SYS_DOCPROBE_55AA
 	/* Check for 0x55 0xAA signature at beginning of window,
 	   this is no longer true once we remove the IPL (for Millennium */
 	if (ReadDOC(window, Sig1) != 0x55 || ReadDOC(window, Sig2) != 0xaa)
 		return 0;
-#endif /* CFG_DOCPROBE_55AA */
+#endif /* CONFIG_SYS_DOCPROBE_55AA */
 
 #ifndef DOC_PASSIVE_PROBE
 	/* It's not possible to cleanly detect the DiskOnChip - the
@@ -1574,7 +1574,7 @@ static inline int doccheck(unsigned long potential, unsigned long physadr)
 		break;
 
 	default:
-#ifndef CFG_DOCPROBE_55AA
+#ifndef CONFIG_SYS_DOCPROBE_55AA
 /*
  * if the ID isn't the DoC2000 or DoCMillenium ID, so we can assume
  * the DOC is missing
@@ -1609,7 +1609,7 @@ void doc_probe(unsigned long physadr)
 
 	if ((ChipID = doccheck(physadr, physadr))) {
 
-		for (i=0; i<CFG_MAX_DOC_DEVICE; i++) {
+		for (i=0; i<CONFIG_SYS_MAX_DOC_DEVICE; i++) {
 			if (doc_dev_desc[i].ChipID == DOC_ChipID_UNKNOWN) {
 				this = doc_dev_desc + i;
 				break;
diff --git a/common/cmd_dtt.c b/common/cmd_dtt.c
index 956dc69da..c5b1d4d8f 100644
--- a/common/cmd_dtt.c
+++ b/common/cmd_dtt.c
@@ -36,7 +36,7 @@ int do_dtt (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
 
 	/* switch to correct I2C bus */
 	old_bus = I2C_GET_BUS();
-	I2C_SET_BUS(CFG_DTT_BUS_NUM);
+	I2C_SET_BUS(CONFIG_SYS_DTT_BUS_NUM);
 
 	/*
 	 * Loop through sensors, read
diff --git a/common/cmd_eeprom.c b/common/cmd_eeprom.c
index e5000e9ff..2451bef74 100644
--- a/common/cmd_eeprom.c
+++ b/common/cmd_eeprom.c
@@ -32,8 +32,8 @@
  * Use the following configuration options to ensure no unneeded performance
  * degradation (typical for EEPROM) is incured for FRAM memory:
  *
- * #define CFG_I2C_FRAM
- * #undef CFG_EEPROM_PAGE_WRITE_DELAY_MS
+ * #define CONFIG_SYS_I2C_FRAM
+ * #undef CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS
  *
  */
 
@@ -42,20 +42,17 @@
 #include <command.h>
 #include <i2c.h>
 
-#if defined(CFG_ENV_IS_IN_EEPROM) || defined(CONFIG_CMD_EEPROM)
-
 extern void eeprom_init  (void);
 extern int  eeprom_read  (unsigned dev_addr, unsigned offset,
 			  uchar *buffer, unsigned cnt);
 extern int  eeprom_write (unsigned dev_addr, unsigned offset,
 			  uchar *buffer, unsigned cnt);
-#if defined(CFG_EEPROM_WREN)
+#if defined(CONFIG_SYS_EEPROM_WREN)
 extern int eeprom_write_enable (unsigned dev_addr, int state);
 #endif
-#endif
 
 
-#if defined(CFG_EEPROM_X40430)
+#if defined(CONFIG_SYS_EEPROM_X40430)
 	/* Maximum number of times to poll for acknowledge after write */
 #define MAX_ACKNOWLEDGE_POLLS	10
 #endif
@@ -68,7 +65,7 @@ int do_eeprom ( cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
 	const char *const fmt =
 		"\nEEPROM @0x%lX %s: addr %08lx  off %04lx  count %ld ... ";
 
-#if defined(CFG_I2C_MULTI_EEPROMS)
+#if defined(CONFIG_SYS_I2C_MULTI_EEPROMS)
 	if (argc == 6) {
 		ulong dev_addr = simple_strtoul (argv[2], NULL, 16);
 		ulong addr = simple_strtoul (argv[3], NULL, 16);
@@ -76,11 +73,11 @@ int do_eeprom ( cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
 		ulong cnt  = simple_strtoul (argv[5], NULL, 16);
 #else
 	if (argc == 5) {
-		ulong dev_addr = CFG_DEF_EEPROM_ADDR;
+		ulong dev_addr = CONFIG_SYS_DEF_EEPROM_ADDR;
 		ulong addr = simple_strtoul (argv[2], NULL, 16);
 		ulong off  = simple_strtoul (argv[3], NULL, 16);
 		ulong cnt  = simple_strtoul (argv[4], NULL, 16);
-#endif /* CFG_I2C_MULTI_EEPROMS */
+#endif /* CONFIG_SYS_I2C_MULTI_EEPROMS */
 
 # ifndef CONFIG_SPI
 		eeprom_init ();
@@ -114,18 +111,16 @@ int do_eeprom ( cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
 
 /*-----------------------------------------------------------------------
  *
- * for CFG_I2C_EEPROM_ADDR_LEN == 2 (16-bit EEPROM address) offset is
+ * for CONFIG_SYS_I2C_EEPROM_ADDR_LEN == 2 (16-bit EEPROM address) offset is
  *   0x000nxxxx for EEPROM address selectors at n, offset xxxx in EEPROM.
  *
- * for CFG_I2C_EEPROM_ADDR_LEN == 1 (8-bit EEPROM page address) offset is
+ * for CONFIG_SYS_I2C_EEPROM_ADDR_LEN == 1 (8-bit EEPROM page address) offset is
  *   0x00000nxx for EEPROM address selectors and page number at n.
  */
 
-#if defined(CFG_ENV_IS_IN_EEPROM) || defined(CONFIG_CMD_EEPROM)
-
 #ifndef CONFIG_SPI
-#if !defined(CFG_I2C_EEPROM_ADDR_LEN) || CFG_I2C_EEPROM_ADDR_LEN < 1 || CFG_I2C_EEPROM_ADDR_LEN > 2
-#error CFG_I2C_EEPROM_ADDR_LEN must be 1 or 2
+#if !defined(CONFIG_SYS_I2C_EEPROM_ADDR_LEN) || CONFIG_SYS_I2C_EEPROM_ADDR_LEN < 1 || CONFIG_SYS_I2C_EEPROM_ADDR_LEN > 2
+#error CONFIG_SYS_I2C_EEPROM_ADDR_LEN must be 1 or 2
 #endif
 #endif
 
@@ -141,11 +136,11 @@ int eeprom_read (unsigned dev_addr, unsigned offset, uchar *buffer, unsigned cnt
 	 */
 	while (offset < end) {
 		unsigned alen, len;
-#if !defined(CFG_I2C_FRAM)
+#if !defined(CONFIG_SYS_I2C_FRAM)
 		unsigned maxlen;
 #endif
 
-#if CFG_I2C_EEPROM_ADDR_LEN == 1 && !defined(CONFIG_SPI_X)
+#if CONFIG_SYS_I2C_EEPROM_ADDR_LEN == 1 && !defined(CONFIG_SPI_X)
 		uchar addr[2];
 
 		blk_off = offset & 0xFF;	/* block offset */
@@ -162,7 +157,7 @@ int eeprom_read (unsigned dev_addr, unsigned offset, uchar *buffer, unsigned cnt
 		addr[1] = offset >>  8;		/* upper address octet */
 		addr[2] = blk_off;		/* lower address octet */
 		alen	= 3;
-#endif	/* CFG_I2C_EEPROM_ADDR_LEN, CONFIG_SPI_X */
+#endif	/* CONFIG_SYS_I2C_EEPROM_ADDR_LEN, CONFIG_SPI_X */
 
 		addr[0] |= dev_addr;		/* insert device address */
 
@@ -173,7 +168,7 @@ int eeprom_read (unsigned dev_addr, unsigned offset, uchar *buffer, unsigned cnt
 		 * bytes that can be ccessed with the single read or write
 		 * operation.
 		 */
-#if !defined(CFG_I2C_FRAM)
+#if !defined(CONFIG_SYS_I2C_FRAM)
 		maxlen = 0x100 - blk_off;
 		if (maxlen > I2C_RXTX_LEN)
 			maxlen = I2C_RXTX_LEN;
@@ -196,10 +191,10 @@ int eeprom_read (unsigned dev_addr, unsigned offset, uchar *buffer, unsigned cnt
 
 /*-----------------------------------------------------------------------
  *
- * for CFG_I2C_EEPROM_ADDR_LEN == 2 (16-bit EEPROM address) offset is
+ * for CONFIG_SYS_I2C_EEPROM_ADDR_LEN == 2 (16-bit EEPROM address) offset is
  *   0x000nxxxx for EEPROM address selectors at n, offset xxxx in EEPROM.
  *
- * for CFG_I2C_EEPROM_ADDR_LEN == 1 (8-bit EEPROM page address) offset is
+ * for CONFIG_SYS_I2C_EEPROM_ADDR_LEN == 1 (8-bit EEPROM page address) offset is
  *   0x00000nxx for EEPROM address selectors and page number at n.
  */
 
@@ -209,7 +204,7 @@ int eeprom_write (unsigned dev_addr, unsigned offset, uchar *buffer, unsigned cn
 	unsigned blk_off;
 	int rcode = 0;
 
-#if defined(CFG_EEPROM_X40430)
+#if defined(CONFIG_SYS_EEPROM_X40430)
 	uchar	contr_r_addr[2];
 	uchar	addr_void[2];
 	uchar	contr_reg[2];
@@ -217,7 +212,7 @@ int eeprom_write (unsigned dev_addr, unsigned offset, uchar *buffer, unsigned cn
 	int	i;
 #endif
 
-#if defined(CFG_EEPROM_WREN)
+#if defined(CONFIG_SYS_EEPROM_WREN)
 	eeprom_write_enable (dev_addr,1);
 #endif
 	/* Write data until done or would cross a write page boundary.
@@ -227,11 +222,11 @@ int eeprom_write (unsigned dev_addr, unsigned offset, uchar *buffer, unsigned cn
 
 	while (offset < end) {
 		unsigned alen, len;
-#if !defined(CFG_I2C_FRAM)
+#if !defined(CONFIG_SYS_I2C_FRAM)
 		unsigned maxlen;
 #endif
 
-#if CFG_I2C_EEPROM_ADDR_LEN == 1 && !defined(CONFIG_SPI_X)
+#if CONFIG_SYS_I2C_EEPROM_ADDR_LEN == 1 && !defined(CONFIG_SPI_X)
 		uchar addr[2];
 
 		blk_off = offset & 0xFF;	/* block offset */
@@ -248,7 +243,7 @@ int eeprom_write (unsigned dev_addr, unsigned offset, uchar *buffer, unsigned cn
 		addr[1] = offset >>  8;		/* upper address octet */
 		addr[2] = blk_off;		/* lower address octet */
 		alen	= 3;
-#endif	/* CFG_I2C_EEPROM_ADDR_LEN, CONFIG_SPI_X */
+#endif	/* CONFIG_SYS_I2C_EEPROM_ADDR_LEN, CONFIG_SPI_X */
 
 		addr[0] |= dev_addr;		/* insert device address */
 
@@ -259,11 +254,11 @@ int eeprom_write (unsigned dev_addr, unsigned offset, uchar *buffer, unsigned cn
 		 * bytes that can be ccessed with the single read or write
 		 * operation.
 		 */
-#if !defined(CFG_I2C_FRAM)
+#if !defined(CONFIG_SYS_I2C_FRAM)
 
-#if defined(CFG_EEPROM_PAGE_WRITE_BITS)
+#if defined(CONFIG_SYS_EEPROM_PAGE_WRITE_BITS)
 
-#define	EEPROM_PAGE_SIZE	(1 << CFG_EEPROM_PAGE_WRITE_BITS)
+#define	EEPROM_PAGE_SIZE	(1 << CONFIG_SYS_EEPROM_PAGE_WRITE_BITS)
 #define	EEPROM_PAGE_OFFSET(x)	((x) & (EEPROM_PAGE_SIZE - 1))
 
 		maxlen = EEPROM_PAGE_SIZE - EEPROM_PAGE_OFFSET(blk_off);
@@ -280,7 +275,7 @@ int eeprom_write (unsigned dev_addr, unsigned offset, uchar *buffer, unsigned cn
 #ifdef CONFIG_SPI
 		spi_write (addr, alen, buffer, len);
 #else
-#if defined(CFG_EEPROM_X40430)
+#if defined(CONFIG_SYS_EEPROM_X40430)
 		/* Get the value of the control register.
 		 * Set current address (internal pointer in the x40430)
 		 * to 0x1ff.
@@ -289,9 +284,9 @@ int eeprom_write (unsigned dev_addr, unsigned offset, uchar *buffer, unsigned cn
 		contr_r_addr[1] = 0xff;
 		addr_void[0]    = 0;
 		addr_void[1]    = addr[1];
-#ifdef CFG_I2C_EEPROM_ADDR
-		contr_r_addr[0] |= CFG_I2C_EEPROM_ADDR;
-		addr_void[0]    |= CFG_I2C_EEPROM_ADDR;
+#ifdef CONFIG_SYS_I2C_EEPROM_ADDR
+		contr_r_addr[0] |= CONFIG_SYS_I2C_EEPROM_ADDR;
+		addr_void[0]    |= CONFIG_SYS_I2C_EEPROM_ADDR;
 #endif
 		contr_reg[0] = 0xff;
 		if (i2c_read (contr_r_addr[0], contr_r_addr[1], 1, contr_reg, 1) != 0) {
@@ -339,8 +334,8 @@ int eeprom_write (unsigned dev_addr, unsigned offset, uchar *buffer, unsigned cn
 			for (i = 0; i < MAX_ACKNOWLEDGE_POLLS; i++) {
 				if (i2c_read (addr_void[0], addr_void[1], 1, contr_reg, 1) == 0)
 					break;	/* got ack */
-#if defined(CFG_EEPROM_PAGE_WRITE_DELAY_MS)
-				udelay(CFG_EEPROM_PAGE_WRITE_DELAY_MS * 1000);
+#if defined(CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS)
+				udelay(CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS * 1000);
 #endif
 			}
 			if (i == MAX_ACKNOWLEDGE_POLLS) {
@@ -369,11 +364,11 @@ int eeprom_write (unsigned dev_addr, unsigned offset, uchar *buffer, unsigned cn
 		buffer += len;
 		offset += len;
 
-#if defined(CFG_EEPROM_PAGE_WRITE_DELAY_MS)
-		udelay(CFG_EEPROM_PAGE_WRITE_DELAY_MS * 1000);
+#if defined(CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS)
+		udelay(CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS * 1000);
 #endif
 	}
-#if defined(CFG_EEPROM_WREN)
+#if defined(CONFIG_SYS_EEPROM_WREN)
 	eeprom_write_enable (dev_addr,0);
 #endif
 	return rcode;
@@ -387,11 +382,11 @@ eeprom_probe (unsigned dev_addr, unsigned offset)
 
 	/* Probe the chip address
 	 */
-#if CFG_I2C_EEPROM_ADDR_LEN == 1 && !defined(CONFIG_SPI_X)
+#if CONFIG_SYS_I2C_EEPROM_ADDR_LEN == 1 && !defined(CONFIG_SPI_X)
 	chip = offset >> 8;		/* block number */
 #else
 	chip = offset >> 16;		/* block number */
-#endif	/* CFG_I2C_EEPROM_ADDR_LEN, CONFIG_SPI_X */
+#endif	/* CONFIG_SYS_I2C_EEPROM_ADDR_LEN, CONFIG_SPI_X */
 
 	chip |= dev_addr;		/* insert device address */
 
@@ -402,12 +397,12 @@ eeprom_probe (unsigned dev_addr, unsigned offset)
 /*-----------------------------------------------------------------------
  * Set default values
  */
-#ifndef	CFG_I2C_SPEED
-#define	CFG_I2C_SPEED	50000
+#ifndef	CONFIG_SYS_I2C_SPEED
+#define	CONFIG_SYS_I2C_SPEED	50000
 #endif
 
-#ifndef	CFG_I2C_SLAVE
-#define	CFG_I2C_SLAVE	0xFE
+#ifndef	CONFIG_SYS_I2C_SLAVE
+#define	CONFIG_SYS_I2C_SLAVE	0xFE
 #endif
 
 void eeprom_init  (void)
@@ -417,18 +412,17 @@ void eeprom_init  (void)
 #endif
 #if defined(CONFIG_HARD_I2C) || \
     defined(CONFIG_SOFT_I2C)
-	i2c_init (CFG_I2C_SPEED, CFG_I2C_SLAVE);
+	i2c_init (CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
 #endif
 }
 /*-----------------------------------------------------------------------
  */
-#endif
 
 /***************************************************/
 
 #if defined(CONFIG_CMD_EEPROM)
 
-#ifdef CFG_I2C_MULTI_EEPROMS
+#ifdef CONFIG_SYS_I2C_MULTI_EEPROMS
 U_BOOT_CMD(
 	eeprom,	6,	1,	do_eeprom,
 	"eeprom  - EEPROM sub-system\n",
@@ -444,6 +438,6 @@ U_BOOT_CMD(
 	"eeprom write addr off cnt\n"
 	"       - read/write `cnt' bytes at EEPROM offset `off'\n"
 );
-#endif /* CFG_I2C_MULTI_EEPROMS */
+#endif /* CONFIG_SYS_I2C_MULTI_EEPROMS */
 
 #endif
diff --git a/common/cmd_elf.c b/common/cmd_elf.c
index 62e5e76ac..27a4b73ed 100644
--- a/common/cmd_elf.c
+++ b/common/cmd_elf.c
@@ -18,15 +18,12 @@
 #include <linux/ctype.h>
 #include <net.h>
 #include <elf.h>
+#include <vxworks.h>
 
-#if defined(CONFIG_WALNUT) || defined(CFG_VXWORKS_MAC_PTR)
+#if defined(CONFIG_WALNUT) || defined(CONFIG_SYS_VXWORKS_MAC_PTR)
 DECLARE_GLOBAL_DATA_PTR;
 #endif
 
-#ifndef MAX
-#define MAX(a,b) ((a) > (b) ? (a) : (b))
-#endif
-
 int valid_elf_image (unsigned long addr);
 unsigned long load_elf_image (unsigned long addr);
 
@@ -102,13 +99,10 @@ int do_bootvx (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 	unsigned long bootaddr;		/* Address to put the bootline */
 	char *bootline;			/* Text of the bootline        */
 	char *tmp;			/* Temporary char pointer      */
+	char build_buf[128];		/* Buffer for building the bootline */
 
-#if defined(CONFIG_4xx) || defined(CONFIG_IOP480)
-	char build_buf[80];		/* Buffer for building the bootline */
-#endif
-	/* -------------------------------------------------- */
-
-	/*
+	/* ---------------------------------------------------
+	 *
 	 * Check the loadaddr variable.
 	 * If we don't know where the image is then we're done.
 	 */
@@ -124,7 +118,8 @@ int do_bootvx (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 	if ((argc == 2) && (strcmp (argv[1], "tftp") == 0)) {
 		if (NetLoop (TFTP) <= 0)
 			return 1;
-		printf ("Automatic boot of VxWorks image at address 0x%08lx ... \n", addr);
+		printf ("Automatic boot of VxWorks image at address 0x%08lx ... \n",
+		     addr);
 	}
 #endif
 
@@ -135,10 +130,10 @@ int do_bootvx (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 	 */
 
 #if defined(CONFIG_WALNUT)
-	tmp = (char *) CFG_NVRAM_BASE_ADDR + 0x500;
+	tmp = (char *) CONFIG_SYS_NVRAM_BASE_ADDR + 0x500;
 	memcpy ((char *) tmp, (char *) &gd->bd->bi_enetaddr[3], 3);
-#elif defined(CFG_VXWORKS_MAC_PTR)
-	tmp = (char *) CFG_VXWORKS_MAC_PTR;
+#elif defined(CONFIG_SYS_VXWORKS_MAC_PTR)
+	tmp = (char *) CONFIG_SYS_VXWORKS_MAC_PTR;
 	memcpy ((char *) tmp, (char *) &gd->bd->bi_enetaddr[0], 6);
 #else
 	puts ("## Ethernet MAC address not copied to NV RAM\n");
@@ -152,7 +147,7 @@ int do_bootvx (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 	 */
 
 	if ((tmp = getenv ("bootaddr")) == NULL)
-		bootaddr = 0x4200;
+		bootaddr = CONFIG_SYS_VXWORKS_BOOT_ADDR;
 	else
 		bootaddr = simple_strtoul (tmp, NULL, 16);
 
@@ -163,54 +158,40 @@ int do_bootvx (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 	 */
 
 	if ((bootline = getenv ("bootargs")) != NULL) {
-		memcpy ((void *) bootaddr, bootline, MAX(strlen(bootline), 255));
-		flush_cache (bootaddr, MAX(strlen(bootline), 255));
+		memcpy ((void *) bootaddr, bootline,
+			max (strlen (bootline), 255));
+		flush_cache (bootaddr, max (strlen (bootline), 255));
 	} else {
-#if defined(CONFIG_4xx)
-		sprintf (build_buf, "ibmEmac(0,0)");
 
-		if ((tmp = getenv ("hostname")) != NULL) {
-			sprintf (&build_buf[strlen (build_buf - 1)],
-				"host:%s ", tmp);
+
+		sprintf (build_buf, CONFIG_SYS_VXWORKS_BOOT_DEVICE);
+		if ((tmp = getenv ("bootfile")) != NULL) {
+			sprintf (&build_buf[strlen (build_buf)],
+				 "%s:%s ", CONFIG_SYS_VXWORKS_SERVERNAME, tmp);
 		} else {
-			sprintf (&build_buf[strlen (build_buf - 1)],
-				": ");
+			sprintf (&build_buf[strlen (build_buf)],
+				 "%s:file ", CONFIG_SYS_VXWORKS_SERVERNAME);
 		}
 
 		if ((tmp = getenv ("ipaddr")) != NULL) {
-			sprintf (&build_buf[strlen (build_buf - 1)],
-				"e=%s ", tmp);
+			sprintf (&build_buf[strlen (build_buf)], "e=%s ", tmp);
 		}
-		memcpy ((void *)bootaddr, build_buf, MAX(strlen(build_buf), 255));
-		flush_cache (bootaddr, MAX(strlen(build_buf), 255));
-#elif defined(CONFIG_IOP480)
-		sprintf (build_buf, "dc(0,0)");
 
-		if ((tmp = getenv ("hostname")) != NULL) {
-			sprintf (&build_buf[strlen (build_buf - 1)],
-				"host:%s ", tmp);
-		} else {
-			sprintf (&build_buf[strlen (build_buf - 1)],
-				": ");
+		if ((tmp = getenv ("serverip")) != NULL) {
+			sprintf (&build_buf[strlen (build_buf)], "h=%s ", tmp);
 		}
 
-		if ((tmp = getenv ("ipaddr")) != NULL) {
-			sprintf (&build_buf[strlen (build_buf - 1)],
-				"e=%s ", tmp);
+		if ((tmp = getenv ("hostname")) != NULL) {
+			sprintf (&build_buf[strlen (build_buf)], "tn=%s ", tmp);
 		}
-		memcpy ((void *) bootaddr, build_buf, MAX(strlen(build_buf), 255));
-		flush_cache (bootaddr, MAX(strlen(build_buf), 255));
-#else
-
-		/*
-		 * I'm not sure what the device should be for other
-		 * PPC flavors, the hostname and ipaddr should be ok
-		 * to just copy
-		 */
-
-		puts ("No bootargs defined\n");
-		return 1;
+#ifdef CONFIG_SYS_VXWORKS_ADD_PARAMS
+		sprintf (&build_buf[strlen (build_buf)],
+			 CONFIG_SYS_VXWORKS_ADD_PARAMS);
 #endif
+
+		memcpy ((void *) bootaddr, build_buf,
+			max (strlen (build_buf), 255));
+		flush_cache (bootaddr, max (strlen (build_buf), 255));
 	}
 
 	/*
@@ -255,8 +236,7 @@ int valid_elf_image (unsigned long addr)
 	}
 
 	if (ehdr->e_type != ET_EXEC) {
-		printf ("## Not a 32-bit elf image at address 0x%08lx\n",
-			addr);
+		printf ("## Not a 32-bit elf image at address 0x%08lx\n", addr);
 		return 0;
 	}
 
@@ -271,7 +251,6 @@ int valid_elf_image (unsigned long addr)
 	return 1;
 }
 
-
 /* ======================================================================
  * A very simple elf loader, assumes the image is valid, returns the
  * entry point address.
diff --git a/common/cmd_ext2.c b/common/cmd_ext2.c
index f56940643..9c43792f3 100644
--- a/common/cmd_ext2.c
+++ b/common/cmd_ext2.c
@@ -44,8 +44,8 @@
 #include <usb.h>
 #endif
 
-#ifndef CONFIG_DOS_PARTITION
-#error DOS partition support must be selected
+#if !defined(CONFIG_DOS_PARTITION) && !defined(CONFIG_EFI_PARTITION)
+#error DOS or EFI partition support must be selected
 #endif
 
 /* #define	EXT2_DEBUG */
@@ -142,7 +142,7 @@ int do_ext2load (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 		if (addr_str != NULL) {
 			addr = simple_strtoul (addr_str, NULL, 16);
 		} else {
-			addr = CFG_LOAD_ADDR;
+			addr = CONFIG_SYS_LOAD_ADDR;
 		}
 		filename = getenv ("bootfile");
 		count = 0;
diff --git a/common/cmd_fat.c b/common/cmd_fat.c
index 9576cdf38..ebe9e090c 100644
--- a/common/cmd_fat.c
+++ b/common/cmd_fat.c
@@ -188,7 +188,7 @@ int find_fat_partition (void)
 	unsigned char *part_table;
 	unsigned char buffer[ATA_BLOCKSIZE];
 
-	for (i = 0; i < CFG_IDE_MAXDEVICE; i++) {
+	for (i = 0; i < CONFIG_SYS_IDE_MAXDEVICE; i++) {
 		dev_desc = ide_get_dev (i);
 		if (!dev_desc) {
 			debug ("couldn't get ide device!\n");
diff --git a/common/cmd_fdc.c b/common/cmd_fdc.c
index 8493defe9..d995ff21e 100644
--- a/common/cmd_fdc.c
+++ b/common/cmd_fdc.c
@@ -50,8 +50,6 @@
 /*#include <rtc.h> */
 /*#endif */
 
-#if defined(CONFIG_CMD_FDC) || defined(CONFIG_CMD_FDOS)
-
 typedef struct {
 	int		flags;		/* connected drives ect */
 	unsigned long	blnr;		/* Logical block nr */
@@ -172,17 +170,17 @@ const static FD_GEO_STRUCT floppy_type[2] = {
 static FDC_COMMAND_STRUCT cmd; /* global command struct */
 
 /* If the boot drive number is undefined, we assume it's drive 0             */
-#ifndef CFG_FDC_DRIVE_NUMBER
-#define CFG_FDC_DRIVE_NUMBER 0
+#ifndef CONFIG_SYS_FDC_DRIVE_NUMBER
+#define CONFIG_SYS_FDC_DRIVE_NUMBER 0
 #endif
 
 /* Hardware access */
-#ifndef CFG_ISA_IO_STRIDE
-#define CFG_ISA_IO_STRIDE 1
+#ifndef CONFIG_SYS_ISA_IO_STRIDE
+#define CONFIG_SYS_ISA_IO_STRIDE 1
 #endif
 
-#ifndef CFG_ISA_IO_OFFSET
-#define CFG_ISA_IO_OFFSET 0
+#ifndef CONFIG_SYS_ISA_IO_OFFSET
+#define CONFIG_SYS_ISA_IO_OFFSET 0
 #endif
 
 
@@ -215,9 +213,9 @@ int wait_for_fdc_int(void)
 unsigned char read_fdc_reg(unsigned int addr)
 {
 	volatile unsigned char *val =
-		(volatile unsigned char *)(CFG_ISA_IO_BASE_ADDRESS +
-					   (addr * CFG_ISA_IO_STRIDE) +
-					   CFG_ISA_IO_OFFSET);
+		(volatile unsigned char *)(CONFIG_SYS_ISA_IO_BASE_ADDRESS +
+					   (addr * CONFIG_SYS_ISA_IO_STRIDE) +
+					   CONFIG_SYS_ISA_IO_OFFSET);
 
 	return val [0];
 }
@@ -226,9 +224,9 @@ unsigned char read_fdc_reg(unsigned int addr)
 void write_fdc_reg(unsigned int addr, unsigned char val)
 {
 	volatile unsigned char *tmp =
-		(volatile unsigned char *)(CFG_ISA_IO_BASE_ADDRESS +
-					   (addr * CFG_ISA_IO_STRIDE) +
-					   CFG_ISA_IO_OFFSET);
+		(volatile unsigned char *)(CONFIG_SYS_ISA_IO_BASE_ADDRESS +
+					   (addr * CONFIG_SYS_ISA_IO_STRIDE) +
+					   CONFIG_SYS_ISA_IO_OFFSET);
 	tmp[0]=val;
 }
 
@@ -654,7 +652,7 @@ int fdc_setup(int drive, FDC_COMMAND_STRUCT *pCMD, FD_GEO_STRUCT *pFG)
 	i8259_unmask_irq(6);
 #endif
 
-#ifdef CFG_FDC_HW_INIT
+#ifdef CONFIG_SYS_FDC_HW_INIT
 	fdc_hw_init ();
 #endif
 	/* first, we reset the FDC via the DOR */
@@ -705,7 +703,6 @@ int fdc_setup(int drive, FDC_COMMAND_STRUCT *pCMD, FD_GEO_STRUCT *pFG)
 
 	return TRUE;
 }
-#endif
 
 #if defined(CONFIG_CMD_FDOS)
 
@@ -792,12 +789,12 @@ int do_fdcboot (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 
 	switch (argc) {
 	case 1:
-		addr = CFG_LOAD_ADDR;
-		boot_drive=CFG_FDC_DRIVE_NUMBER;
+		addr = CONFIG_SYS_LOAD_ADDR;
+		boot_drive=CONFIG_SYS_FDC_DRIVE_NUMBER;
 		break;
 	case 2:
 		addr = simple_strtoul(argv[1], NULL, 16);
-		boot_drive=CFG_FDC_DRIVE_NUMBER;
+		boot_drive=CONFIG_SYS_FDC_DRIVE_NUMBER;
 		break;
 	case 3:
 		addr = simple_strtoul(argv[1], NULL, 16);
@@ -903,15 +900,6 @@ int do_fdcboot (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 	return rcode;
 }
 
-
-#endif
-
-
-/***************************************************/
-
-
-#if defined(CONFIG_CMD_FDC)
-
 U_BOOT_CMD(
 	fdcboot,	3,	1,	do_fdcboot,
 	"fdcboot - boot from floppy device\n",
diff --git a/common/cmd_fdos.c b/common/cmd_fdos.c
index b3dbd19fa..aa13b5261 100644
--- a/common/cmd_fdos.c
+++ b/common/cmd_fdos.c
@@ -42,7 +42,7 @@ int do_fdosboot(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
     int size;
     int rcode = 0;
     char buf [12];
-    int drive = CFG_FDC_DRIVE_NUMBER;
+    int drive = CONFIG_SYS_FDC_DRIVE_NUMBER;
 
     /* pre-set load_addr */
     if ((ep = getenv("loadaddr")) != NULL) {
@@ -118,7 +118,7 @@ int do_fdosboot(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 int do_fdosls(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 {
     char *path = "";
-    int drive = CFG_FDC_DRIVE_NUMBER;
+    int drive = CONFIG_SYS_FDC_DRIVE_NUMBER;
 
     switch (argc) {
     case 1:
diff --git a/common/cmd_fdt.c b/common/cmd_fdt.c
index 0593bad02..4274a773a 100644
--- a/common/cmd_fdt.c
+++ b/common/cmd_fdt.c
@@ -364,7 +364,7 @@ int do_fdt (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
 	} else if (strncmp(argv[1], "me", 2) == 0) {
 		uint64_t addr, size;
 		int err;
-#ifdef CFG_64BIT_STRTOUL
+#ifdef CONFIG_SYS_64BIT_STRTOUL
 			addr = simple_strtoull(argv[2], NULL, 16);
 			size = simple_strtoull(argv[3], NULL, 16);
 #else
@@ -402,7 +402,7 @@ int do_fdt (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
 		} else if (argv[2][0] == 'a') {
 			uint64_t addr, size;
 			int err;
-#ifdef CFG_64BIT_STRTOUL
+#ifdef CONFIG_SYS_64BIT_STRTOUL
 			addr = simple_strtoull(argv[3], NULL, 16);
 			size = simple_strtoull(argv[4], NULL, 16);
 #else
@@ -450,7 +450,8 @@ int do_fdt (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
 			initrd_end = simple_strtoul(argv[3], NULL, 16);
 		}
 
-		fdt_chosen(working_fdt, initrd_start, initrd_end, 1);
+		fdt_chosen(working_fdt, 1);
+		fdt_initrd(working_fdt, initrd_start, initrd_end, 1);
 	}
 	/* resize the fdt */
 	else if (strncmp(argv[1], "re", 2) == 0) {
diff --git a/common/cmd_flash.c b/common/cmd_flash.c
index 18d2250f3..93eefa964 100644
--- a/common/cmd_flash.c
+++ b/common/cmd_flash.c
@@ -41,7 +41,7 @@ int find_dev_and_part(const char *id, struct mtd_device **dev,
 		u8 *part_num, struct part_info **part);
 #endif
 
-#ifndef CFG_NO_FLASH
+#ifndef CONFIG_SYS_NO_FLASH
 extern flash_info_t flash_info[];	/* info for FLASH chips */
 
 /*
@@ -76,7 +76,7 @@ abbrev_spec (char *str, flash_info_t ** pinfo, int *psf, int *psl)
 
 	bank = simple_strtoul (str, &ep, 10);
 	if (ep == str || *ep != '\0' ||
-		bank < 1 || bank > CFG_MAX_FLASH_BANKS ||
+		bank < 1 || bank > CONFIG_SYS_MAX_FLASH_BANKS ||
 		(fp = &flash_info[bank - 1])->flash_id == FLASH_UNKNOWN)
 		return -1;
 
@@ -105,6 +105,47 @@ abbrev_spec (char *str, flash_info_t ** pinfo, int *psf, int *psl)
 }
 
 /*
+ * Take *addr in Flash and adjust it to fall on the end of its sector
+ */
+int flash_sect_roundb (ulong *addr)
+{
+	flash_info_t *info;
+	ulong bank, sector_end_addr;
+	char found;
+	int i;
+
+	/* find the end addr of the sector where the *addr is */
+	found = 0;
+	for (bank = 0; bank < CONFIG_SYS_MAX_FLASH_BANKS && !found; ++bank) {
+		info = &flash_info[bank];
+		for (i = 0; i < info->sector_count && !found; ++i) {
+			/* get the end address of the sector */
+			if (i == info->sector_count - 1) {
+				sector_end_addr = info->start[0] +
+								info->size - 1;
+			} else {
+				sector_end_addr = info->start[i+1] - 1;
+			}
+
+			if (*addr <= sector_end_addr &&
+						*addr >= info->start[i]) {
+				found = 1;
+				/* adjust *addr if necessary */
+				if (*addr < sector_end_addr)
+					*addr = sector_end_addr;
+			} /* sector */
+		} /* bank */
+	}
+	if (!found) {
+		/* error, addres not in flash */
+		printf("Error: end address (0x%08lx) not in flash!\n", *addr);
+		return 1;
+	}
+
+	return 0;
+}
+
+/*
  * This function computes the start and end addresses for both
  * erase and protect commands. The range of the addresses on which
  * either of the commands is to operate can be given in two forms:
@@ -126,8 +167,6 @@ addr_spec(char *arg1, char *arg2, ulong *addr_first, ulong *addr_last)
 {
 	char *ep;
 	char len_used; /* indicates if the "start +length" form used */
-	char found;
-	ulong bank;
 
 	*addr_first = simple_strtoul(arg1, &ep, 16);
 	if (ep == arg1 || *ep != '\0')
@@ -157,38 +196,8 @@ addr_spec(char *arg1, char *arg2, ulong *addr_first, ulong *addr_last)
 		 * sector boundary, so that the commands don't fail later on.
 		 */
 
-		/* find the end addr of the sector where the *addr_last is */
-		found = 0;
-		for (bank = 0; bank < CFG_MAX_FLASH_BANKS && !found; ++bank){
-			int i;
-			flash_info_t *info = &flash_info[bank];
-			for (i = 0; i < info->sector_count && !found; ++i){
-				/* get the end address of the sector */
-				ulong sector_end_addr;
-				if (i == info->sector_count - 1){
-					sector_end_addr =
-						info->start[0] + info->size - 1;
-				} else {
-					sector_end_addr =
-						info->start[i+1] - 1;
-				}
-				if (*addr_last <= sector_end_addr &&
-						*addr_last >= info->start[i]){
-					/* sector found */
-					found = 1;
-					/* adjust *addr_last if necessary */
-					if (*addr_last < sector_end_addr){
-						*addr_last = sector_end_addr;
-					}
-				}
-			} /* sector */
-		} /* bank */
-		if (!found){
-			/* error, addres not in flash */
-			printf("Error: end address (0x%08lx) not in flash!\n",
-								*addr_last);
+		if (flash_sect_roundb(addr_last) > 0)
 			return -1;
-		}
 	} /* "start +length" from used */
 
 	return 1;
@@ -205,13 +214,13 @@ flash_fill_sect_ranges (ulong addr_first, ulong addr_last,
 
 	*s_count = 0;
 
-	for (bank=0; bank < CFG_MAX_FLASH_BANKS; ++bank) {
+	for (bank=0; bank < CONFIG_SYS_MAX_FLASH_BANKS; ++bank) {
 		s_first[bank] = -1;	/* first sector to erase	*/
 		s_last [bank] = -1;	/* last  sector to erase	*/
 	}
 
 	for (bank=0,info = &flash_info[0];
-	     (bank < CFG_MAX_FLASH_BANKS) && (addr_first <= addr_last);
+	     (bank < CONFIG_SYS_MAX_FLASH_BANKS) && (addr_first <= addr_last);
 	     ++bank, ++info) {
 		ulong b_end;
 		int sect;
@@ -276,11 +285,11 @@ flash_fill_sect_ranges (ulong addr_first, ulong addr_last,
 
 	return rcode;
 }
-#endif /* CFG_NO_FLASH */
+#endif /* CONFIG_SYS_NO_FLASH */
 
 int do_flinfo ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 {
-#ifndef CFG_NO_FLASH
+#ifndef CONFIG_SYS_NO_FLASH
 	ulong bank;
 #endif
 
@@ -288,9 +297,9 @@ int do_flinfo ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 	dataflash_print_info();
 #endif
 
-#ifndef CFG_NO_FLASH
+#ifndef CONFIG_SYS_NO_FLASH
 	if (argc == 1) {	/* print info for all FLASH banks */
-		for (bank=0; bank <CFG_MAX_FLASH_BANKS; ++bank) {
+		for (bank=0; bank <CONFIG_SYS_MAX_FLASH_BANKS; ++bank) {
 			printf ("\nBank # %ld: ", bank+1);
 
 			flash_print_info (&flash_info[bank]);
@@ -299,20 +308,20 @@ int do_flinfo ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 	}
 
 	bank = simple_strtoul(argv[1], NULL, 16);
-	if ((bank < 1) || (bank > CFG_MAX_FLASH_BANKS)) {
+	if ((bank < 1) || (bank > CONFIG_SYS_MAX_FLASH_BANKS)) {
 		printf ("Only FLASH Banks # 1 ... # %d supported\n",
-			CFG_MAX_FLASH_BANKS);
+			CONFIG_SYS_MAX_FLASH_BANKS);
 		return 1;
 	}
 	printf ("\nBank # %ld: ", bank);
 	flash_print_info (&flash_info[bank-1]);
-#endif /* CFG_NO_FLASH */
+#endif /* CONFIG_SYS_NO_FLASH */
 	return 0;
 }
 
 int do_flerase (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 {
-#ifndef CFG_NO_FLASH
+#ifndef CONFIG_SYS_NO_FLASH
 	flash_info_t *info;
 	ulong bank, addr_first, addr_last;
 	int n, sect_first, sect_last;
@@ -329,7 +338,7 @@ int do_flerase (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 	}
 
 	if (strcmp(argv[1], "all") == 0) {
-		for (bank=1; bank<=CFG_MAX_FLASH_BANKS; ++bank) {
+		for (bank=1; bank<=CONFIG_SYS_MAX_FLASH_BANKS; ++bank) {
 			printf ("Erase Flash Bank # %ld ", bank);
 			info = &flash_info[bank-1];
 			rcode = flash_erase (info, 0, info->sector_count-1);
@@ -381,9 +390,9 @@ int do_flerase (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 
 	if (strcmp(argv[1], "bank") == 0) {
 		bank = simple_strtoul(argv[2], NULL, 16);
-		if ((bank < 1) || (bank > CFG_MAX_FLASH_BANKS)) {
+		if ((bank < 1) || (bank > CONFIG_SYS_MAX_FLASH_BANKS)) {
 			printf ("Only FLASH Banks # 1 ... # %d supported\n",
-				CFG_MAX_FLASH_BANKS);
+				CONFIG_SYS_MAX_FLASH_BANKS);
 			return 1;
 		}
 		printf ("Erase Flash Bank # %ld ", bank);
@@ -406,18 +415,18 @@ int do_flerase (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 	return rcode;
 #else
 	return 0;
-#endif /* CFG_NO_FLASH */
+#endif /* CONFIG_SYS_NO_FLASH */
 }
 
-#ifndef CFG_NO_FLASH
+#ifndef CONFIG_SYS_NO_FLASH
 int flash_sect_erase (ulong addr_first, ulong addr_last)
 {
 	flash_info_t *info;
 	ulong bank;
-#ifdef CFG_MAX_FLASH_BANKS_DETECT
-	int s_first[CFG_MAX_FLASH_BANKS_DETECT], s_last[CFG_MAX_FLASH_BANKS_DETECT];
+#ifdef CONFIG_SYS_MAX_FLASH_BANKS_DETECT
+	int s_first[CONFIG_SYS_MAX_FLASH_BANKS_DETECT], s_last[CONFIG_SYS_MAX_FLASH_BANKS_DETECT];
 #else
-	int s_first[CFG_MAX_FLASH_BANKS], s_last[CFG_MAX_FLASH_BANKS];
+	int s_first[CONFIG_SYS_MAX_FLASH_BANKS], s_last[CONFIG_SYS_MAX_FLASH_BANKS];
 #endif
 	int erased = 0;
 	int planned;
@@ -428,7 +437,7 @@ int flash_sect_erase (ulong addr_first, ulong addr_last)
 
 	if (planned && (rcode == 0)) {
 		for (bank=0,info = &flash_info[0];
-		     (bank < CFG_MAX_FLASH_BANKS) && (rcode == 0);
+		     (bank < CONFIG_SYS_MAX_FLASH_BANKS) && (rcode == 0);
 		     ++bank, ++info) {
 			if (s_first[bank]>=0) {
 				erased += s_last[bank] - s_first[bank] + 1;
@@ -450,15 +459,15 @@ int flash_sect_erase (ulong addr_first, ulong addr_last)
 	}
 	return rcode;
 }
-#endif /* CFG_NO_FLASH */
+#endif /* CONFIG_SYS_NO_FLASH */
 
 int do_protect (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 {
-#ifndef CFG_NO_FLASH
+#ifndef CONFIG_SYS_NO_FLASH
 	flash_info_t *info;
 	ulong bank;
 	int i, n, sect_first, sect_last;
-#endif /* CFG_NO_FLASH */
+#endif /* CONFIG_SYS_NO_FLASH */
 	ulong addr_first, addr_last;
 	int p;
 #if defined(CONFIG_CMD_JFFS2) && defined(CONFIG_JFFS2_CMDLINE)
@@ -503,9 +512,9 @@ int do_protect (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 	}
 #endif
 
-#ifndef CFG_NO_FLASH
+#ifndef CONFIG_SYS_NO_FLASH
 	if (strcmp(argv[2], "all") == 0) {
-		for (bank=1; bank<=CFG_MAX_FLASH_BANKS; ++bank) {
+		for (bank=1; bank<=CONFIG_SYS_MAX_FLASH_BANKS; ++bank) {
 			info = &flash_info[bank-1];
 			if (info->flash_id == FLASH_UNKNOWN) {
 				continue;
@@ -514,17 +523,17 @@ int do_protect (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 				p ? "" : "Un-", bank);
 
 			for (i=0; i<info->sector_count; ++i) {
-#if defined(CFG_FLASH_PROTECTION)
+#if defined(CONFIG_SYS_FLASH_PROTECTION)
 				if (flash_real_protect(info, i, p))
 					rcode = 1;
 				putc ('.');
 #else
 				info->protect[i] = p;
-#endif	/* CFG_FLASH_PROTECTION */
+#endif	/* CONFIG_SYS_FLASH_PROTECTION */
 			}
-#if defined(CFG_FLASH_PROTECTION)
+#if defined(CONFIG_SYS_FLASH_PROTECTION)
 			if (!rcode) puts (" done\n");
-#endif	/* CFG_FLASH_PROTECTION */
+#endif	/* CONFIG_SYS_FLASH_PROTECTION */
 		}
 		return rcode;
 	}
@@ -538,18 +547,18 @@ int do_protect (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 			p ? "" : "Un-", sect_first, sect_last,
 			(info-flash_info)+1);
 		for (i = sect_first; i <= sect_last; i++) {
-#if defined(CFG_FLASH_PROTECTION)
+#if defined(CONFIG_SYS_FLASH_PROTECTION)
 			if (flash_real_protect(info, i, p))
 				rcode =  1;
 			putc ('.');
 #else
 			info->protect[i] = p;
-#endif	/* CFG_FLASH_PROTECTION */
+#endif	/* CONFIG_SYS_FLASH_PROTECTION */
 		}
 
-#if defined(CFG_FLASH_PROTECTION)
+#if defined(CONFIG_SYS_FLASH_PROTECTION)
 		if (!rcode) puts (" done\n");
-#endif	/* CFG_FLASH_PROTECTION */
+#endif	/* CONFIG_SYS_FLASH_PROTECTION */
 
 		return rcode;
 	}
@@ -588,9 +597,9 @@ int do_protect (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 
 	if (strcmp(argv[2], "bank") == 0) {
 		bank = simple_strtoul(argv[3], NULL, 16);
-		if ((bank < 1) || (bank > CFG_MAX_FLASH_BANKS)) {
+		if ((bank < 1) || (bank > CONFIG_SYS_MAX_FLASH_BANKS)) {
 			printf ("Only FLASH Banks # 1 ... # %d supported\n",
-				CFG_MAX_FLASH_BANKS);
+				CONFIG_SYS_MAX_FLASH_BANKS);
 			return 1;
 		}
 		printf ("%sProtect Flash Bank # %ld\n",
@@ -602,18 +611,18 @@ int do_protect (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 			return 1;
 		}
 		for (i=0; i<info->sector_count; ++i) {
-#if defined(CFG_FLASH_PROTECTION)
+#if defined(CONFIG_SYS_FLASH_PROTECTION)
 			if (flash_real_protect(info, i, p))
 				rcode =  1;
 			putc ('.');
 #else
 			info->protect[i] = p;
-#endif	/* CFG_FLASH_PROTECTION */
+#endif	/* CONFIG_SYS_FLASH_PROTECTION */
 		}
 
-#if defined(CFG_FLASH_PROTECTION)
+#if defined(CONFIG_SYS_FLASH_PROTECTION)
 		if (!rcode) puts (" done\n");
-#endif	/* CFG_FLASH_PROTECTION */
+#endif	/* CONFIG_SYS_FLASH_PROTECTION */
 
 		return rcode;
 	}
@@ -628,19 +637,19 @@ int do_protect (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 		return 1;
 	}
 	rcode = flash_sect_protect (p, addr_first, addr_last);
-#endif /* CFG_NO_FLASH */
+#endif /* CONFIG_SYS_NO_FLASH */
 	return rcode;
 }
 
-#ifndef CFG_NO_FLASH
+#ifndef CONFIG_SYS_NO_FLASH
 int flash_sect_protect (int p, ulong addr_first, ulong addr_last)
 {
 	flash_info_t *info;
 	ulong bank;
-#ifdef CFG_MAX_FLASH_BANKS_DETECT
-	int s_first[CFG_MAX_FLASH_BANKS_DETECT], s_last[CFG_MAX_FLASH_BANKS_DETECT];
+#ifdef CONFIG_SYS_MAX_FLASH_BANKS_DETECT
+	int s_first[CONFIG_SYS_MAX_FLASH_BANKS_DETECT], s_last[CONFIG_SYS_MAX_FLASH_BANKS_DETECT];
 #else
-	int s_first[CFG_MAX_FLASH_BANKS], s_last[CFG_MAX_FLASH_BANKS];
+	int s_first[CONFIG_SYS_MAX_FLASH_BANKS], s_last[CONFIG_SYS_MAX_FLASH_BANKS];
 #endif
 	int protected, i;
 	int planned;
@@ -651,7 +660,7 @@ int flash_sect_protect (int p, ulong addr_first, ulong addr_last)
 	protected = 0;
 
 	if (planned && (rcode == 0)) {
-		for (bank=0,info = &flash_info[0]; bank < CFG_MAX_FLASH_BANKS; ++bank, ++info) {
+		for (bank=0,info = &flash_info[0]; bank < CONFIG_SYS_MAX_FLASH_BANKS; ++bank, ++info) {
 			if (info->flash_id == FLASH_UNKNOWN) {
 				continue;
 			}
@@ -662,19 +671,19 @@ int flash_sect_protect (int p, ulong addr_first, ulong addr_last)
 					s_first[bank], s_last[bank], bank+1);
 				protected += s_last[bank] - s_first[bank] + 1;
 				for (i=s_first[bank]; i<=s_last[bank]; ++i) {
-#if defined(CFG_FLASH_PROTECTION)
+#if defined(CONFIG_SYS_FLASH_PROTECTION)
 					if (flash_real_protect(info, i, p))
 						rcode = 1;
 					putc ('.');
 #else
 					info->protect[i] = p;
-#endif	/* CFG_FLASH_PROTECTION */
+#endif	/* CONFIG_SYS_FLASH_PROTECTION */
 				}
 			}
 		}
-#if defined(CFG_FLASH_PROTECTION)
+#if defined(CONFIG_SYS_FLASH_PROTECTION)
 		puts (" done\n");
-#endif	/* CFG_FLASH_PROTECTION */
+#endif	/* CONFIG_SYS_FLASH_PROTECTION */
 
 		printf ("%sProtected %d sectors\n",
 			p ? "" : "Un-", protected);
@@ -685,7 +694,7 @@ int flash_sect_protect (int p, ulong addr_first, ulong addr_last)
 	}
 	return rcode;
 }
-#endif /* CFG_NO_FLASH */
+#endif /* CONFIG_SYS_NO_FLASH */
 
 
 /**************************************************/
diff --git a/common/cmd_i2c.c b/common/cmd_i2c.c
index 91bf25b6b..448f2fedd 100644
--- a/common/cmd_i2c.c
+++ b/common/cmd_i2c.c
@@ -65,7 +65,7 @@
  *   significant 1, 2, or 3 bits of address into the chip address byte.
  *   This effectively makes one chip (logically) look like 2, 4, or
  *   8 chips.  This is handled (awkwardly) by #defining
- *   CFG_I2C_EEPROM_ADDR_OVERFLOW and using the .1 modifier on the
+ *   CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW and using the .1 modifier on the
  *   {addr} field (since .1 is the default, it doesn't actually have to
  *   be specified).  Examples: given a memory chip at I2C chip address
  *   0x50, the following would happen...
@@ -83,7 +83,9 @@
 
 #include <common.h>
 #include <command.h>
+#include <environment.h>
 #include <i2c.h>
+#include <malloc.h>
 #include <asm/byteorder.h>
 
 /* Display values from last command.
@@ -103,19 +105,19 @@ static uint	i2c_mm_last_alen;
  * When multiple buses are present, the list is an array of bus-address
  * pairs.  The following macros take care of this */
 
-#if defined(CFG_I2C_NOPROBES)
+#if defined(CONFIG_SYS_I2C_NOPROBES)
 #if defined(CONFIG_I2C_MULTI_BUS)
 static struct
 {
 	uchar	bus;
 	uchar	addr;
-} i2c_no_probes[] = CFG_I2C_NOPROBES;
+} i2c_no_probes[] = CONFIG_SYS_I2C_NOPROBES;
 #define GET_BUS_NUM	i2c_get_bus_num()
 #define COMPARE_BUS(b,i)	(i2c_no_probes[(i)].bus == (b))
 #define COMPARE_ADDR(a,i)	(i2c_no_probes[(i)].addr == (a))
 #define NO_PROBE_ADDR(i)	i2c_no_probes[(i)].addr
 #else		/* single bus */
-static uchar i2c_no_probes[] = CFG_I2C_NOPROBES;
+static uchar i2c_no_probes[] = CONFIG_SYS_I2C_NOPROBES;
 #define GET_BUS_NUM	0
 #define COMPARE_BUS(b,i)	((b) == 0)	/* Make compiler happy */
 #define COMPARE_ADDR(a,i)	(i2c_no_probes[(i)] == (a))
@@ -125,9 +127,16 @@ static uchar i2c_no_probes[] = CFG_I2C_NOPROBES;
 #define NUM_ELEMENTS_NOPROBE (sizeof(i2c_no_probes)/sizeof(i2c_no_probes[0]))
 #endif
 
+#if defined(CONFIG_I2C_MUX)
+static I2C_MUX_DEVICE	*i2c_mux_devices = NULL;
+static	int	i2c_mux_busid = CONFIG_SYS_MAX_I2C_BUS;
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#endif
+
 static int
 mod_i2c_mem(cmd_tbl_t *cmdtp, int incrflag, int flag, int argc, char *argv[]);
-extern int cmd_get_data_size(char* arg, int default_size);
 
 /*
  * Syntax:
@@ -240,7 +249,6 @@ int do_i2c_mm ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 	return mod_i2c_mem (cmdtp, 1, flag, argc, argv);
 }
 
-
 int do_i2c_nm ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 {
 	return mod_i2c_mem (cmdtp, 0, flag, argc, argv);
@@ -314,7 +322,7 @@ int do_i2c_mw ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 /*
  * No write delay with FRAM devices.
  */
-#if !defined(CFG_I2C_FRAM)
+#if !defined(CONFIG_SYS_I2C_FRAM)
 		udelay(11000);
 #endif
 
@@ -330,7 +338,6 @@ int do_i2c_mw ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 	return (0);
 }
 
-
 /* Calculate a CRC on memory
  *
  * Syntax:
@@ -400,7 +407,6 @@ int do_i2c_crc (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 	return 0;
 }
 
-
 /* Modify memory.
  *
  * Syntax:
@@ -520,8 +526,8 @@ mod_i2c_mem(cmd_tbl_t *cmdtp, int incrflag, int flag, int argc, char *argv[])
 #endif
 				if (i2c_write(chip, addr, alen, (uchar *)&data, size) != 0)
 					puts ("Error writing the chip.\n");
-#ifdef CFG_EEPROM_PAGE_WRITE_DELAY_MS
-				udelay(CFG_EEPROM_PAGE_WRITE_DELAY_MS * 1000);
+#ifdef CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS
+				udelay(CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS * 1000);
 #endif
 				if (incrflag)
 					addr += size;
@@ -543,14 +549,14 @@ mod_i2c_mem(cmd_tbl_t *cmdtp, int incrflag, int flag, int argc, char *argv[])
 int do_i2c_probe (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 {
 	int j;
-#if defined(CFG_I2C_NOPROBES)
+#if defined(CONFIG_SYS_I2C_NOPROBES)
 	int k, skip;
 	uchar bus = GET_BUS_NUM;
 #endif	/* NOPROBES */
 
 	puts ("Valid chip addresses:");
 	for (j = 0; j < 128; j++) {
-#if defined(CFG_I2C_NOPROBES)
+#if defined(CONFIG_SYS_I2C_NOPROBES)
 		skip = 0;
 		for (k=0; k < NUM_ELEMENTS_NOPROBE; k++) {
 			if (COMPARE_BUS(bus, k) && COMPARE_ADDR(j, k)) {
@@ -566,7 +572,7 @@ int do_i2c_probe (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 	}
 	putc ('\n');
 
-#if defined(CFG_I2C_NOPROBES)
+#if defined(CONFIG_SYS_I2C_NOPROBES)
 	puts ("Excluded chip addresses:");
 	for (k=0; k < NUM_ELEMENTS_NOPROBE; k++) {
 		if (COMPARE_BUS(bus,k))
@@ -578,7 +584,6 @@ int do_i2c_probe (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 	return 0;
 }
 
-
 /*
  * Syntax:
  *	iloop {i2c_chip} {addr}{.0, .1, .2} [{length}] [{delay}]
@@ -649,7 +654,6 @@ int do_i2c_loop(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 	return 0;
 }
 
-
 /*
  * The SDRAM command is separately configured because many
  * (most?) embedded boards don't use SDRAM DIMMs.
@@ -1183,6 +1187,43 @@ int do_sdram (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
 #endif
 
 #if defined(CONFIG_I2C_CMD_TREE)
+int do_i2c_reset(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
+{
+	i2c_init (CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
+	return 0;
+}
+
+#if defined(CONFIG_I2C_MUX)
+int do_i2c_add_bus(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
+{
+	int ret=0;
+
+	if (argc == 1) {
+		/* show all busses */
+		I2C_MUX		*mux;
+		I2C_MUX_DEVICE	*device = i2c_mux_devices;
+
+		printf ("Busses reached over muxes:\n");
+		while (device != NULL) {
+			printf ("Bus ID: %x\n", device->busid);
+			printf ("  reached over Mux(es):\n");
+			mux = device->mux;
+			while (mux != NULL) {
+				printf ("    %s@%x ch: %x\n", mux->name, mux->chip, mux->channel);
+				mux = mux->next;
+			}
+			device = device->next;
+		}
+	} else {
+		I2C_MUX_DEVICE *dev;
+
+		dev = i2c_mux_ident_muxstring ((uchar *)argv[1]);
+		ret = 0;
+	}
+	return ret;
+}
+#endif  /* CONFIG_I2C_MUX */
+
 #if defined(CONFIG_I2C_MULTI_BUS)
 int do_i2c_bus_num(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
 {
@@ -1221,12 +1262,16 @@ int do_i2c_bus_speed(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
 
 int do_i2c(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
 {
+#if defined(CONFIG_I2C_MUX)
+	if (!strncmp(argv[1], "bu", 2))
+		return do_i2c_add_bus(cmdtp, flag, --argc, ++argv);
+#endif  /* CONFIG_I2C_MUX */
+	if (!strncmp(argv[1], "sp", 2))
+		return do_i2c_bus_speed(cmdtp, flag, --argc, ++argv);
 #if defined(CONFIG_I2C_MULTI_BUS)
 	if (!strncmp(argv[1], "de", 2))
 		return do_i2c_bus_num(cmdtp, flag, --argc, ++argv);
 #endif  /* CONFIG_I2C_MULTI_BUS */
-	if (!strncmp(argv[1], "sp", 2))
-		return do_i2c_bus_speed(cmdtp, flag, --argc, ++argv);
 	if (!strncmp(argv[1], "md", 2))
 		return do_i2c_md(cmdtp, flag, --argc, ++argv);
 	if (!strncmp(argv[1], "mm", 2))
@@ -1239,6 +1284,8 @@ int do_i2c(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
 		return do_i2c_crc(cmdtp, flag, --argc, ++argv);
 	if (!strncmp(argv[1], "pr", 2))
 		return do_i2c_probe(cmdtp, flag, --argc, ++argv);
+	if (!strncmp(argv[1], "re", 2))
+		return do_i2c_reset(cmdtp, flag, --argc, ++argv);
 	if (!strncmp(argv[1], "lo", 2))
 		return do_i2c_loop(cmdtp, flag, --argc, ++argv);
 #if defined(CONFIG_CMD_SDRAM)
@@ -1257,16 +1304,20 @@ int do_i2c(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
 U_BOOT_CMD(
 	i2c, 6, 1, do_i2c,
 	"i2c     - I2C sub-system\n",
+#if defined(CONFIG_I2C_MUX)
+	"bus [muxtype:muxaddr:muxchannel] - add a new bus reached over muxes.\n"
+#endif  /* CONFIG_I2C_MUX */
+	"speed [speed] - show or set I2C bus speed\n"
 #if defined(CONFIG_I2C_MULTI_BUS)
-	"dev [dev] - show or set current I2C bus\n"
+	"i2c dev [dev] - show or set current I2C bus\n"
 #endif  /* CONFIG_I2C_MULTI_BUS */
-	"i2c speed [speed] - show or set I2C bus speed\n"
 	"i2c md chip address[.0, .1, .2] [# of objects] - read from I2C device\n"
 	"i2c mm chip address[.0, .1, .2] - write to I2C device (auto-incrementing)\n"
 	"i2c mw chip address[.0, .1, .2] value [count] - write to I2C device (fill)\n"
 	"i2c nm chip address[.0, .1, .2] - write to I2C device (constant address)\n"
 	"i2c crc32 chip address[.0, .1, .2] count - compute CRC32 checksum\n"
 	"i2c probe - show devices on the I2C bus\n"
+	"i2c reset - re-init the I2C Controller\n"
 	"i2c loop chip address[.0, .1, .2] [# of objects] - looping read of device\n"
 #if defined(CONFIG_CMD_SDRAM)
 	"i2c sdram chip - print SDRAM configuration information\n"
@@ -1327,3 +1378,221 @@ U_BOOT_CMD(
 	"      (valid chip values 50..57)\n"
 );
 #endif
+
+#if defined(CONFIG_I2C_MUX)
+
+int i2c_mux_add_device(I2C_MUX_DEVICE *dev)
+{
+	I2C_MUX_DEVICE	*devtmp = i2c_mux_devices;
+
+	if (i2c_mux_devices == NULL) {
+		i2c_mux_devices = dev;
+		return 0;
+	}
+	while (devtmp->next != NULL)
+		devtmp = devtmp->next;
+
+	devtmp->next = dev;
+	return 0;
+}
+
+I2C_MUX_DEVICE	*i2c_mux_search_device(int id)
+{
+	I2C_MUX_DEVICE	*device = i2c_mux_devices;
+
+	while (device != NULL) {
+		if (device->busid == id)
+			return device;
+		device = device->next;
+	}
+	return NULL;
+}
+
+/* searches in the buf from *pos the next ':'.
+ * returns:
+ *     0 if found (with *pos = where)
+ *   < 0 if an error occured
+ *   > 0 if the end of buf is reached
+ */
+static int i2c_mux_search_next (int *pos, uchar	*buf, int len)
+{
+	while ((buf[*pos] != ':') && (*pos < len)) {
+		*pos += 1;
+	}
+	if (*pos >= len)
+		return 1;
+	if (buf[*pos] != ':')
+		return -1;
+	return 0;
+}
+
+static int i2c_mux_get_busid (void)
+{
+	int	tmp = i2c_mux_busid;
+
+	i2c_mux_busid ++;
+	return tmp;
+}
+
+/* Analyses a Muxstring and sends immediately the
+   Commands to the Muxes. Runs from Flash.
+ */
+int i2c_mux_ident_muxstring_f (uchar *buf)
+{
+	int	pos = 0;
+	int	oldpos;
+	int	ret = 0;
+	int	len = strlen((char *)buf);
+	int	chip;
+	uchar	channel;
+	int	was = 0;
+
+	while (ret == 0) {
+		oldpos = pos;
+		/* search name */
+		ret = i2c_mux_search_next(&pos, buf, len);
+		if (ret != 0)
+			printf ("ERROR\n");
+		/* search address */
+		pos ++;
+		oldpos = pos;
+		ret = i2c_mux_search_next(&pos, buf, len);
+		if (ret != 0)
+			printf ("ERROR\n");
+		buf[pos] = 0;
+		chip = simple_strtoul((char *)&buf[oldpos], NULL, 16);
+		buf[pos] = ':';
+		/* search channel */
+		pos ++;
+		oldpos = pos;
+		ret = i2c_mux_search_next(&pos, buf, len);
+		if (ret < 0)
+			printf ("ERROR\n");
+		was = 0;
+		if (buf[pos] != 0) {
+			buf[pos] = 0;
+			was = 1;
+		}
+		channel = simple_strtoul((char *)&buf[oldpos], NULL, 16);
+		if (was)
+			buf[pos] = ':';
+		if (i2c_write(chip, 0, 0, &channel, 1) != 0) {
+			printf ("Error setting Mux: chip:%x channel: \
+				%x\n", chip, channel);
+			return -1;
+		}
+		pos ++;
+		oldpos = pos;
+
+	}
+
+	return 0;
+}
+
+/* Analyses a Muxstring and if this String is correct
+ * adds a new I2C Bus.
+ */
+I2C_MUX_DEVICE *i2c_mux_ident_muxstring (uchar *buf)
+{
+	I2C_MUX_DEVICE	*device;
+	I2C_MUX		*mux;
+	int	pos = 0;
+	int	oldpos;
+	int	ret = 0;
+	int	len = strlen((char *)buf);
+	int	was = 0;
+
+	device = (I2C_MUX_DEVICE *)malloc (sizeof(I2C_MUX_DEVICE));
+	device->mux = NULL;
+	device->busid = i2c_mux_get_busid ();
+	device->next = NULL;
+	while (ret == 0) {
+		mux = (I2C_MUX *)malloc (sizeof(I2C_MUX));
+		mux->next = NULL;
+		/* search name of mux */
+		oldpos = pos;
+		ret = i2c_mux_search_next(&pos, buf, len);
+		if (ret != 0)
+			printf ("%s no name.\n", __FUNCTION__);
+		mux->name = (char *)malloc (pos - oldpos + 1);
+		memcpy (mux->name, &buf[oldpos], pos - oldpos);
+		mux->name[pos - oldpos] = 0;
+		/* search address */
+		pos ++;
+		oldpos = pos;
+		ret = i2c_mux_search_next(&pos, buf, len);
+		if (ret != 0)
+			printf ("%s no mux address.\n", __FUNCTION__);
+		buf[pos] = 0;
+		mux->chip = simple_strtoul((char *)&buf[oldpos], NULL, 16);
+		buf[pos] = ':';
+		/* search channel */
+		pos ++;
+		oldpos = pos;
+		ret = i2c_mux_search_next(&pos, buf, len);
+		if (ret < 0)
+			printf ("%s no mux channel.\n", __FUNCTION__);
+		was = 0;
+		if (buf[pos] != 0) {
+			buf[pos] = 0;
+			was = 1;
+		}
+		mux->channel = simple_strtoul((char *)&buf[oldpos], NULL, 16);
+		if (was)
+			buf[pos] = ':';
+		if (device->mux == NULL)
+			device->mux = mux;
+		else {
+			I2C_MUX		*muxtmp = device->mux;
+			while (muxtmp->next != NULL) {
+				muxtmp = muxtmp->next;
+			}
+			muxtmp->next = mux;
+		}
+		pos ++;
+		oldpos = pos;
+	}
+	if (ret > 0) {
+		/* Add Device */
+		i2c_mux_add_device (device);
+		return device;
+	}
+
+	return NULL;
+}
+
+int i2x_mux_select_mux(int bus)
+{
+	I2C_MUX_DEVICE  *dev;
+	I2C_MUX		*mux;
+
+	if ((gd->flags & GD_FLG_RELOC) != GD_FLG_RELOC) {
+		/* select Default Mux Bus */
+#if defined(CONFIG_SYS_I2C_IVM_BUS)
+		i2c_mux_ident_muxstring_f ((uchar *)CONFIG_SYS_I2C_IVM_BUS);
+#else
+		{
+		unsigned char *buf;
+		buf = (unsigned char *) getenv("EEprom_ivm");
+		if (buf != NULL)
+			i2c_mux_ident_muxstring_f (buf);
+		}
+#endif
+		return 0;
+	}
+	dev = i2c_mux_search_device(bus);
+	if (dev == NULL)
+		return -1;
+
+	mux = dev->mux;
+	while (mux != NULL) {
+		if (i2c_write(mux->chip, 0, 0, &mux->channel, 1) != 0) {
+			printf ("Error setting Mux: chip:%x channel: \
+				%x\n", mux->chip, mux->channel);
+			return -1;
+		}
+		mux = mux->next;
+	}
+	return 0;
+}
+#endif /* CONFIG_I2C_MUX */
diff --git a/common/cmd_ide.c b/common/cmd_ide.c
index 2fcaff8c5..db05f76e5 100644
--- a/common/cmd_ide.c
+++ b/common/cmd_ide.c
@@ -92,10 +92,10 @@ const static pio_config_t pio_config_ns [IDE_MAX_PIO_MODE+1] =
 
 static pio_config_t pio_config_clk [IDE_MAX_PIO_MODE+1];
 
-#ifndef	CFG_PIO_MODE
-#define	CFG_PIO_MODE	0		/* use a relaxed default */
+#ifndef	CONFIG_SYS_PIO_MODE
+#define	CONFIG_SYS_PIO_MODE	0		/* use a relaxed default */
 #endif
-static int pio_mode = CFG_PIO_MODE;
+static int pio_mode = CONFIG_SYS_PIO_MODE;
 
 /* Make clock cycles and always round up */
 
@@ -109,23 +109,23 @@ static int pio_mode = CFG_PIO_MODE;
 static int curr_device = -1;
 
 /* Current offset for IDE0 / IDE1 bus access	*/
-ulong ide_bus_offset[CFG_IDE_MAXBUS] = {
-#if defined(CFG_ATA_IDE0_OFFSET)
-	CFG_ATA_IDE0_OFFSET,
+ulong ide_bus_offset[CONFIG_SYS_IDE_MAXBUS] = {
+#if defined(CONFIG_SYS_ATA_IDE0_OFFSET)
+	CONFIG_SYS_ATA_IDE0_OFFSET,
 #endif
-#if defined(CFG_ATA_IDE1_OFFSET) && (CFG_IDE_MAXBUS > 1)
-	CFG_ATA_IDE1_OFFSET,
+#if defined(CONFIG_SYS_ATA_IDE1_OFFSET) && (CONFIG_SYS_IDE_MAXBUS > 1)
+	CONFIG_SYS_ATA_IDE1_OFFSET,
 #endif
 };
 
 
 #ifndef CONFIG_AMIGAONEG3SE
-static int ide_bus_ok[CFG_IDE_MAXBUS];
+static int ide_bus_ok[CONFIG_SYS_IDE_MAXBUS];
 #else
-static int ide_bus_ok[CFG_IDE_MAXBUS] = {0,};
+static int ide_bus_ok[CONFIG_SYS_IDE_MAXBUS] = {0,};
 #endif
 
-block_dev_desc_t ide_dev_desc[CFG_IDE_MAXDEVICE];
+block_dev_desc_t ide_dev_desc[CONFIG_SYS_IDE_MAXDEVICE];
 /* ------------------------------------------------------------------------- */
 
 #ifdef CONFIG_IDE_LED
@@ -165,8 +165,8 @@ static void input_data(int dev, ulong *sect_buf, int words);
 static void output_data(int dev, ulong *sect_buf, int words);
 static void ident_cpy (unsigned char *dest, unsigned char *src, unsigned int len);
 
-#ifndef CFG_ATA_PORT_ADDR
-#define CFG_ATA_PORT_ADDR(port) (port)
+#ifndef CONFIG_SYS_ATA_PORT_ADDR
+#define CONFIG_SYS_ATA_PORT_ADDR(port) (port)
 #endif
 
 #ifdef CONFIG_ATAPI
@@ -205,7 +205,7 @@ int do_ide (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 
 		putc ('\n');
 
-		for (i=0; i<CFG_IDE_MAXDEVICE; ++i) {
+		for (i=0; i<CONFIG_SYS_IDE_MAXDEVICE; ++i) {
 			if (ide_dev_desc[i].type==DEV_TYPE_UNKNOWN)
 				continue; /* list only known devices */
 			printf ("IDE device %d: ", i);
@@ -214,7 +214,7 @@ int do_ide (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 		return 0;
 
 	} else if (strncmp(argv[1],"dev",3) == 0) {
-		if ((curr_device < 0) || (curr_device >= CFG_IDE_MAXDEVICE)) {
+		if ((curr_device < 0) || (curr_device >= CONFIG_SYS_IDE_MAXDEVICE)) {
 			puts ("\nno IDE devices available\n");
 			return 1;
 		}
@@ -224,7 +224,7 @@ int do_ide (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 	} else if (strncmp(argv[1],"part",4) == 0) {
 		int dev, ok;
 
-		for (ok=0, dev=0; dev<CFG_IDE_MAXDEVICE; ++dev) {
+		for (ok=0, dev=0; dev<CONFIG_SYS_IDE_MAXDEVICE; ++dev) {
 			if (ide_dev_desc[dev].part_type!=PART_TYPE_UNKNOWN) {
 				++ok;
 				if (dev)
@@ -245,7 +245,7 @@ int do_ide (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 		int dev = (int)simple_strtoul(argv[2], NULL, 10);
 
 		printf ("\nIDE device %d: ", dev);
-		if (dev >= CFG_IDE_MAXDEVICE) {
+		if (dev >= CONFIG_SYS_IDE_MAXDEVICE) {
 			puts ("unknown device\n");
 			return 1;
 		}
@@ -296,7 +296,7 @@ int do_ide (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 		ulong addr = simple_strtoul(argv[2], NULL, 16);
 		ulong cnt  = simple_strtoul(argv[4], NULL, 16);
 		ulong n;
-#ifdef CFG_64BIT_LBA
+#ifdef CONFIG_SYS_64BIT_LBA
 		lbaint_t blk  = simple_strtoull(argv[3], NULL, 16);
 
 		printf ("\nIDE read: device %d block # %qd, count %ld ... ",
@@ -325,7 +325,7 @@ int do_ide (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 		ulong addr = simple_strtoul(argv[2], NULL, 16);
 		ulong cnt  = simple_strtoul(argv[4], NULL, 16);
 		ulong n;
-#ifdef CFG_64BIT_LBA
+#ifdef CONFIG_SYS_64BIT_LBA
 		lbaint_t blk  = simple_strtoull(argv[3], NULL, 16);
 
 		printf ("\nIDE write: device %d block # %qd, count %ld ... ",
@@ -371,7 +371,7 @@ int do_diskboot (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 	show_boot_progress (41);
 	switch (argc) {
 	case 1:
-		addr = CFG_LOAD_ADDR;
+		addr = CONFIG_SYS_LOAD_ADDR;
 		boot_device = getenv ("bootdevice");
 		break;
 	case 2:
@@ -525,8 +525,8 @@ void inline
 __ide_outb(int dev, int port, unsigned char val)
 {
 	debug ("ide_outb (dev= %d, port= 0x%x, val= 0x%02x) : @ 0x%08lx\n",
-		dev, port, val, (ATA_CURR_BASE(dev)+CFG_ATA_PORT_ADDR(port)));
-	outb(val, (ATA_CURR_BASE(dev)+CFG_ATA_PORT_ADDR(port)));
+		dev, port, val, (ATA_CURR_BASE(dev)+CONFIG_SYS_ATA_PORT_ADDR(port)));
+	outb(val, (ATA_CURR_BASE(dev)+CONFIG_SYS_ATA_PORT_ADDR(port)));
 }
 void inline ide_outb (int dev, int port, unsigned char val)
 		__attribute__((weak, alias("__ide_outb")));
@@ -535,9 +535,9 @@ unsigned char inline
 __ide_inb(int dev, int port)
 {
 	uchar val;
-	val = inb((ATA_CURR_BASE(dev)+CFG_ATA_PORT_ADDR(port)));
+	val = inb((ATA_CURR_BASE(dev)+CONFIG_SYS_ATA_PORT_ADDR(port)));
 	debug ("ide_inb (dev= %d, port= 0x%x) : @ 0x%08lx -> 0x%02x\n",
-		dev, port, (ATA_CURR_BASE(dev)+CFG_ATA_PORT_ADDR(port)), val);
+		dev, port, (ATA_CURR_BASE(dev)+CONFIG_SYS_ATA_PORT_ADDR(port)), val);
 	return val;
 }
 unsigned char inline ide_inb(int dev, int port)
@@ -557,7 +557,7 @@ void ide_init (void)
 {
 
 #ifdef CONFIG_IDE_8xx_DIRECT
-	volatile immap_t *immr = (immap_t *)CFG_IMMR;
+	volatile immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
 	volatile pcmconf8xx_t *pcmp = &(immr->im_pcmcia);
 #endif
 	unsigned char c;
@@ -639,17 +639,17 @@ void ide_init (void)
 	 * According to spec, this can take up to 31 seconds!
 	 */
 #ifndef CONFIG_AMIGAONEG3SE
-	for (bus=0; bus<CFG_IDE_MAXBUS; ++bus) {
-		int dev = bus * (CFG_IDE_MAXDEVICE / CFG_IDE_MAXBUS);
+	for (bus=0; bus<CONFIG_SYS_IDE_MAXBUS; ++bus) {
+		int dev = bus * (CONFIG_SYS_IDE_MAXDEVICE / CONFIG_SYS_IDE_MAXBUS);
 #else
 	s = getenv("ide_maxbus");
 	if (s)
 		max_bus_scan = simple_strtol(s, NULL, 10);
 	else
-		max_bus_scan = CFG_IDE_MAXBUS;
+		max_bus_scan = CONFIG_SYS_IDE_MAXBUS;
 
 	for (bus=0; bus<max_bus_scan; ++bus) {
-		int dev = bus * (CFG_IDE_MAXDEVICE / max_bus_scan);
+		int dev = bus * (CONFIG_SYS_IDE_MAXDEVICE / max_bus_scan);
 #endif
 
 #ifdef CONFIG_IDE_8xx_PCCARD
@@ -722,7 +722,7 @@ void ide_init (void)
 	ide_led ((LED_IDE1 | LED_IDE2), 0);	/* LED's off	*/
 
 	curr_device = -1;
-	for (i=0; i<CFG_IDE_MAXDEVICE; ++i) {
+	for (i=0; i<CONFIG_SYS_IDE_MAXDEVICE; ++i) {
 #ifdef CONFIG_IDE_LED
 		int led = (IDE_BUS(i) == 0) ? LED_IDE1 : LED_IDE2;
 #endif
@@ -753,7 +753,7 @@ void ide_init (void)
 
 block_dev_desc_t * ide_get_dev(int dev)
 {
-	return (dev < CFG_IDE_MAXDEVICE) ? &ide_dev_desc[dev] : NULL;
+	return (dev < CONFIG_SYS_IDE_MAXDEVICE) ? &ide_dev_desc[dev] : NULL;
 }
 
 
@@ -762,7 +762,7 @@ block_dev_desc_t * ide_get_dev(int dev)
 static void
 set_pcmcia_timing (int pmode)
 {
-	volatile immap_t *immr = (immap_t *)CFG_IMMR;
+	volatile immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
 	volatile pcmconf8xx_t *pcmp = &(immr->im_pcmcia);
 	ulong timings;
 
@@ -775,33 +775,33 @@ set_pcmcia_timing (int pmode)
 
 	/* IDE 0
 	 */
-	pcmp->pcmc_pbr0 = CFG_PCMCIA_PBR0;
-	pcmp->pcmc_por0 = CFG_PCMCIA_POR0
-#if (CFG_PCMCIA_POR0 != 0)
+	pcmp->pcmc_pbr0 = CONFIG_SYS_PCMCIA_PBR0;
+	pcmp->pcmc_por0 = CONFIG_SYS_PCMCIA_POR0
+#if (CONFIG_SYS_PCMCIA_POR0 != 0)
 			| timings
 #endif
 			;
 	debug ("PBR0: %08x  POR0: %08x\n", pcmp->pcmc_pbr0, pcmp->pcmc_por0);
 
-	pcmp->pcmc_pbr1 = CFG_PCMCIA_PBR1;
-	pcmp->pcmc_por1 = CFG_PCMCIA_POR1
-#if (CFG_PCMCIA_POR1 != 0)
+	pcmp->pcmc_pbr1 = CONFIG_SYS_PCMCIA_PBR1;
+	pcmp->pcmc_por1 = CONFIG_SYS_PCMCIA_POR1
+#if (CONFIG_SYS_PCMCIA_POR1 != 0)
 			| timings
 #endif
 			;
 	debug ("PBR1: %08x  POR1: %08x\n", pcmp->pcmc_pbr1, pcmp->pcmc_por1);
 
-	pcmp->pcmc_pbr2 = CFG_PCMCIA_PBR2;
-	pcmp->pcmc_por2 = CFG_PCMCIA_POR2
-#if (CFG_PCMCIA_POR2 != 0)
+	pcmp->pcmc_pbr2 = CONFIG_SYS_PCMCIA_PBR2;
+	pcmp->pcmc_por2 = CONFIG_SYS_PCMCIA_POR2
+#if (CONFIG_SYS_PCMCIA_POR2 != 0)
 			| timings
 #endif
 			;
 	debug ("PBR2: %08x  POR2: %08x\n", pcmp->pcmc_pbr2, pcmp->pcmc_por2);
 
-	pcmp->pcmc_pbr3 = CFG_PCMCIA_PBR3;
-	pcmp->pcmc_por3 = CFG_PCMCIA_POR3
-#if (CFG_PCMCIA_POR3 != 0)
+	pcmp->pcmc_pbr3 = CONFIG_SYS_PCMCIA_PBR3;
+	pcmp->pcmc_por3 = CONFIG_SYS_PCMCIA_POR3
+#if (CONFIG_SYS_PCMCIA_POR3 != 0)
 			| timings
 #endif
 			;
@@ -809,33 +809,33 @@ set_pcmcia_timing (int pmode)
 
 	/* IDE 1
 	 */
-	pcmp->pcmc_pbr4 = CFG_PCMCIA_PBR4;
-	pcmp->pcmc_por4 = CFG_PCMCIA_POR4
-#if (CFG_PCMCIA_POR4 != 0)
+	pcmp->pcmc_pbr4 = CONFIG_SYS_PCMCIA_PBR4;
+	pcmp->pcmc_por4 = CONFIG_SYS_PCMCIA_POR4
+#if (CONFIG_SYS_PCMCIA_POR4 != 0)
 			| timings
 #endif
 			;
 	debug ("PBR4: %08x  POR4: %08x\n", pcmp->pcmc_pbr4, pcmp->pcmc_por4);
 
-	pcmp->pcmc_pbr5 = CFG_PCMCIA_PBR5;
-	pcmp->pcmc_por5 = CFG_PCMCIA_POR5
-#if (CFG_PCMCIA_POR5 != 0)
+	pcmp->pcmc_pbr5 = CONFIG_SYS_PCMCIA_PBR5;
+	pcmp->pcmc_por5 = CONFIG_SYS_PCMCIA_POR5
+#if (CONFIG_SYS_PCMCIA_POR5 != 0)
 			| timings
 #endif
 			;
 	debug ("PBR5: %08x  POR5: %08x\n", pcmp->pcmc_pbr5, pcmp->pcmc_por5);
 
-	pcmp->pcmc_pbr6 = CFG_PCMCIA_PBR6;
-	pcmp->pcmc_por6 = CFG_PCMCIA_POR6
-#if (CFG_PCMCIA_POR6 != 0)
+	pcmp->pcmc_pbr6 = CONFIG_SYS_PCMCIA_PBR6;
+	pcmp->pcmc_por6 = CONFIG_SYS_PCMCIA_POR6
+#if (CONFIG_SYS_PCMCIA_POR6 != 0)
 			| timings
 #endif
 			;
 	debug ("PBR6: %08x  POR6: %08x\n", pcmp->pcmc_pbr6, pcmp->pcmc_por6);
 
-	pcmp->pcmc_pbr7 = CFG_PCMCIA_PBR7;
-	pcmp->pcmc_por7 = CFG_PCMCIA_POR7
-#if (CFG_PCMCIA_POR7 != 0)
+	pcmp->pcmc_pbr7 = CONFIG_SYS_PCMCIA_PBR7;
+	pcmp->pcmc_por7 = CONFIG_SYS_PCMCIA_POR7
+#if (CONFIG_SYS_PCMCIA_POR7 != 0)
 			| timings
 #endif
 			;
@@ -1079,7 +1079,7 @@ static void ide_ident (block_dev_desc_t *dev_desc)
 	if (s) {
 		max_bus_scan = simple_strtol(s, NULL, 10);
 	} else {
-		max_bus_scan = CFG_IDE_MAXBUS;
+		max_bus_scan = CONFIG_SYS_IDE_MAXBUS;
 	}
 	if (device >= max_bus_scan*2) {
 		dev_desc->type=DEV_TYPE_UNKNOWN;
@@ -1166,15 +1166,16 @@ static void ide_ident (block_dev_desc_t *dev_desc)
 	ident_cpy ((unsigned char*)dev_desc->product, iop->serial_no, sizeof(dev_desc->product));
 #ifdef __LITTLE_ENDIAN
 	/*
-	 * firmware revision and model number have Big Endian Byte
-	 * order in Word. Convert both to little endian.
+	 * firmware revision, model, and serial number have Big Endian Byte
+	 * order in Word. Convert all three to little endian.
 	 *
 	 * See CF+ and CompactFlash Specification Revision 2.0:
-	 * 6.2.1.6: Identfy Drive, Table 39 for more details
+	 * 6.2.1.6: Identify Drive, Table 39 for more details
 	 */
 
 	strswab (dev_desc->revision);
 	strswab (dev_desc->vendor);
+	strswab (dev_desc->product);
 #endif /* __LITTLE_ENDIAN */
 
 	if ((iop->config & 0x0080)==0x0080)
@@ -1359,7 +1360,7 @@ ulong ide_read (int device, lbaint_t blknr, ulong blkcnt, void *buffer)
 			/* write high bits */
 			ide_outb (device, ATA_SECT_CNT, 0);
 			ide_outb (device, ATA_LBA_LOW,	(blknr >> 24) & 0xFF);
-#ifdef CFG_64BIT_LBA
+#ifdef CONFIG_SYS_64BIT_LBA
 			ide_outb (device, ATA_LBA_MID,	(blknr >> 32) & 0xFF);
 			ide_outb (device, ATA_LBA_HIGH, (blknr >> 40) & 0xFF);
 #else
@@ -1397,7 +1398,7 @@ ulong ide_read (int device, lbaint_t blknr, ulong blkcnt, void *buffer)
 		}
 
 		if ((c&(ATA_STAT_DRQ|ATA_STAT_BUSY|ATA_STAT_ERR)) != ATA_STAT_DRQ) {
-#if defined(CFG_64BIT_LBA) && defined(CFG_64BIT_VSPRINTF)
+#if defined(CONFIG_SYS_64BIT_LBA) && defined(CONFIG_SYS_64BIT_VSPRINTF)
 			printf ("Error (no IRQ) dev %d blk %qd: status 0x%02x\n",
 				device, blknr, c);
 #else
@@ -1454,7 +1455,7 @@ ulong ide_write (int device, lbaint_t blknr, ulong blkcnt, void *buffer)
 			/* write high bits */
 			ide_outb (device, ATA_SECT_CNT, 0);
 			ide_outb (device, ATA_LBA_LOW,	(blknr >> 24) & 0xFF);
-#ifdef CFG_64BIT_LBA
+#ifdef CONFIG_SYS_64BIT_LBA
 			ide_outb (device, ATA_LBA_MID,	(blknr >> 32) & 0xFF);
 			ide_outb (device, ATA_LBA_HIGH, (blknr >> 40) & 0xFF);
 #else
@@ -1487,7 +1488,7 @@ ulong ide_write (int device, lbaint_t blknr, ulong blkcnt, void *buffer)
 		c = ide_wait (device, IDE_TIME_OUT);	/* can't take over 500 ms */
 
 		if ((c&(ATA_STAT_DRQ|ATA_STAT_BUSY|ATA_STAT_ERR)) != ATA_STAT_DRQ) {
-#if defined(CFG_64BIT_LBA) && defined(CFG_64BIT_VSPRINTF)
+#if defined(CONFIG_SYS_64BIT_LBA) && defined(CONFIG_SYS_64BIT_VSPRINTF)
 			printf ("Error (no IRQ) dev %d blk %qd: status 0x%02x\n",
 				device, blknr, c);
 #else
@@ -1567,15 +1568,15 @@ extern void ide_set_reset(int idereset);
 
 static void ide_reset (void)
 {
-#if defined(CFG_PB_12V_ENABLE) || defined(CFG_PB_IDE_MOTOR)
-	volatile immap_t *immr = (immap_t *)CFG_IMMR;
+#if defined(CONFIG_SYS_PB_12V_ENABLE) || defined(CONFIG_SYS_PB_IDE_MOTOR)
+	volatile immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
 #endif
 	int i;
 
 	curr_device = -1;
-	for (i=0; i<CFG_IDE_MAXBUS; ++i)
+	for (i=0; i<CONFIG_SYS_IDE_MAXBUS; ++i)
 		ide_bus_ok[i] = 0;
-	for (i=0; i<CFG_IDE_MAXDEVICE; ++i)
+	for (i=0; i<CONFIG_SYS_IDE_MAXDEVICE; ++i)
 		ide_dev_desc[i].type = DEV_TYPE_UNKNOWN;
 
 	ide_set_reset (1); /* assert reset */
@@ -1585,11 +1586,11 @@ static void ide_reset (void)
 
 	WATCHDOG_RESET();
 
-#ifdef CFG_PB_12V_ENABLE
-	immr->im_cpm.cp_pbdat &= ~(CFG_PB_12V_ENABLE);	/* 12V Enable output OFF */
-	immr->im_cpm.cp_pbpar &= ~(CFG_PB_12V_ENABLE);
-	immr->im_cpm.cp_pbodr &= ~(CFG_PB_12V_ENABLE);
-	immr->im_cpm.cp_pbdir |=   CFG_PB_12V_ENABLE;
+#ifdef CONFIG_SYS_PB_12V_ENABLE
+	immr->im_cpm.cp_pbdat &= ~(CONFIG_SYS_PB_12V_ENABLE);	/* 12V Enable output OFF */
+	immr->im_cpm.cp_pbpar &= ~(CONFIG_SYS_PB_12V_ENABLE);
+	immr->im_cpm.cp_pbodr &= ~(CONFIG_SYS_PB_12V_ENABLE);
+	immr->im_cpm.cp_pbdir |=   CONFIG_SYS_PB_12V_ENABLE;
 
 	/* wait 500 ms for the voltage to stabilize
 	 */
@@ -1597,19 +1598,19 @@ static void ide_reset (void)
 		udelay (1000);
 	}
 
-	immr->im_cpm.cp_pbdat |=   CFG_PB_12V_ENABLE;	/* 12V Enable output ON */
-#endif	/* CFG_PB_12V_ENABLE */
+	immr->im_cpm.cp_pbdat |=   CONFIG_SYS_PB_12V_ENABLE;	/* 12V Enable output ON */
+#endif	/* CONFIG_SYS_PB_12V_ENABLE */
 
-#ifdef CFG_PB_IDE_MOTOR
+#ifdef CONFIG_SYS_PB_IDE_MOTOR
 	/* configure IDE Motor voltage monitor pin as input */
-	immr->im_cpm.cp_pbpar &= ~(CFG_PB_IDE_MOTOR);
-	immr->im_cpm.cp_pbodr &= ~(CFG_PB_IDE_MOTOR);
-	immr->im_cpm.cp_pbdir &= ~(CFG_PB_IDE_MOTOR);
+	immr->im_cpm.cp_pbpar &= ~(CONFIG_SYS_PB_IDE_MOTOR);
+	immr->im_cpm.cp_pbodr &= ~(CONFIG_SYS_PB_IDE_MOTOR);
+	immr->im_cpm.cp_pbdir &= ~(CONFIG_SYS_PB_IDE_MOTOR);
 
 	/* wait up to 1 s for the motor voltage to stabilize
 	 */
 	for (i=0; i<1000; ++i) {
-		if ((immr->im_cpm.cp_pbdat & CFG_PB_IDE_MOTOR) != 0) {
+		if ((immr->im_cpm.cp_pbdat & CONFIG_SYS_PB_IDE_MOTOR) != 0) {
 			break;
 		}
 		udelay (1000);
@@ -1626,7 +1627,7 @@ static void ide_reset (void)
 #  endif
 # endif	/* CONFIG_STATUS_LED */
 	}
-#endif	/* CFG_PB_IDE_MOTOR */
+#endif	/* CONFIG_SYS_PB_IDE_MOTOR */
 
 	WATCHDOG_RESET();
 
diff --git a/common/cmd_immap.c b/common/cmd_immap.c
index d75826977..13ad94e20 100644
--- a/common/cmd_immap.c
+++ b/common/cmd_immap.c
@@ -52,7 +52,7 @@ unimplemented ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 int
 do_siuinfo (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 {
-	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
 
 #if defined(CONFIG_8xx)
 	volatile sysconf8xx_t *sc = &immap->im_siu_conf;
@@ -83,7 +83,7 @@ do_siuinfo (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 int
 do_memcinfo (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 {
-	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
 
 #if defined(CONFIG_8xx)
 	volatile memctl8xx_t *memctl = &immap->im_memctl;
@@ -151,7 +151,7 @@ do_icinfo (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 int
 do_carinfo (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 {
-	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
 
 #if defined(CONFIG_8xx)
 	volatile car8xx_t *car = &immap->im_clkrst;
@@ -235,7 +235,7 @@ static void binary (char *label, uint value, int nbits)
 int
 do_iopinfo (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 {
-	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
 
 #if defined(CONFIG_8xx)
 	volatile iop8xx_t *iop = &immap->im_ioport;
@@ -500,7 +500,7 @@ static void prbrg (int n, uint val)
 int
 do_brginfo (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 {
-	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
 
 #if defined(CONFIG_8xx)
 	volatile cpm8xx_t *cp = &immap->im_cpm;
@@ -524,7 +524,7 @@ do_brginfo (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 int
 do_i2cinfo (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 {
-	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
 
 #if defined(CONFIG_8xx)
 	volatile i2c8xx_t *i2c = &immap->im_i2c;
diff --git a/common/cmd_itest.c b/common/cmd_itest.c
index ce988723c..9e77fa913 100644
--- a/common/cmd_itest.c
+++ b/common/cmd_itest.c
@@ -64,8 +64,6 @@ op_tbl_t op_table [] = {
 
 #define op_tbl_size (sizeof(op_table)/sizeof(op_table[0]))
 
-extern int cmd_get_data_size(char* arg, int default_size);
-
 static long evalexp(char *s, int w)
 {
 	long l, *p;
diff --git a/common/cmd_jffs2.c b/common/cmd_jffs2.c
index c031d8034..7866c808d 100644
--- a/common/cmd_jffs2.c
+++ b/common/cmd_jffs2.c
@@ -51,7 +51,7 @@
  * mtdids=<idmap>[,<idmap>,...]
  *
  * <idmap>    := <dev-id>=<mtd-id>
- * <dev-id>   := 'nand'|'nor'<dev-num>
+ * <dev-id>   := 'nand'|'nor'|'onenand'<dev-num>
  * <dev-num>  := mtd device number, 0...
  * <mtd-id>   := unique device tag used by linux kernel to find mtd device (mtd->name)
  *
@@ -103,6 +103,13 @@
 #include <nand.h>
 #endif /* !CONFIG_NAND_LEGACY */
 #endif
+
+#if defined(CONFIG_CMD_ONENAND)
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/onenand.h>
+#include <onenand_uboot.h>
+#endif
+
 /* enable/disable debugging messages */
 #define	DEBUG_JFFS
 #undef	DEBUG_JFFS
@@ -332,11 +339,15 @@ static int part_validate_nor(struct mtdids *id, struct part_info *part)
 	extern flash_info_t flash_info[];
 	flash_info_t *flash;
 	int offset_aligned;
-	u32 end_offset;
+	u32 end_offset, sector_size = 0;
 	int i;
 
 	flash = &flash_info[id->num];
 
+	/* size of last sector */
+	part->sector_size = flash->size -
+		(flash->start[flash->sector_count-1] - flash->start[0]);
+
 	offset_aligned = 0;
 	for (i = 0; i < flash->sector_count; i++) {
 		if ((flash->start[i] - flash->start[0]) == part->offset) {
@@ -351,12 +362,18 @@ static int part_validate_nor(struct mtdids *id, struct part_info *part)
 	}
 
 	end_offset = part->offset + part->size;
+	offset_aligned = 0;
 	for (i = 0; i < flash->sector_count; i++) {
+		if (i) {
+			sector_size = flash->start[i] - flash->start[i-1];
+			if (part->sector_size < sector_size)
+				part->sector_size = sector_size;
+		}
 		if ((flash->start[i] - flash->start[0]) == end_offset)
-			return 0;
+			offset_aligned = 1;
 	}
 
-	if (flash->size == end_offset)
+	if (offset_aligned || flash->size == end_offset)
 		return 0;
 
 	printf("%s%d: partition (%s) size alignment incorrect\n",
@@ -382,6 +399,8 @@ static int part_validate_nand(struct mtdids *id, struct part_info *part)
 
 	nand = &nand_info[id->num];
 
+	part->sector_size = nand->erasesize;
+
 	if ((unsigned long)(part->offset) % nand->erasesize) {
 		printf("%s%d: partition (%s) start offset alignment incorrect\n",
 				MTD_DEV_TYPE(id->type), id->num, part->name);
@@ -401,6 +420,45 @@ static int part_validate_nand(struct mtdids *id, struct part_info *part)
 }
 
 /**
+ * Performs sanity check for supplied OneNAND flash partition.
+ * Table of existing OneNAND flash devices is searched and partition device
+ * is located. Alignment with the granularity of nand erasesize is verified.
+ *
+ * @param id of the parent device
+ * @param part partition to validate
+ * @return 0 if partition is valid, 1 otherwise
+ */
+static int part_validate_onenand(struct mtdids *id, struct part_info *part)
+{
+#if defined(CONFIG_CMD_ONENAND)
+	/* info for OneNAND chips */
+	struct mtd_info *mtd;
+
+	mtd = &onenand_mtd;
+
+	part->sector_size = mtd->erasesize;
+
+	if ((unsigned long)(part->offset) % mtd->erasesize) {
+		printf("%s%d: partition (%s) start offset"
+			"alignment incorrect\n",
+				MTD_DEV_TYPE(id->type), id->num, part->name);
+		return 1;
+	}
+
+	if (part->size % mtd->erasesize) {
+		printf("%s%d: partition (%s) size alignment incorrect\n",
+				MTD_DEV_TYPE(id->type), id->num, part->name);
+		return 1;
+	}
+
+	return 0;
+#else
+	return 1;
+#endif
+}
+
+
+/**
  * Performs sanity check for supplied partition. Offset and size are verified
  * to be within valid range. Partition type is checked and either
  * parts_validate_nor() or parts_validate_nand() is called with the argument
@@ -436,6 +494,8 @@ static int part_validate(struct mtdids *id, struct part_info *part)
 		return part_validate_nand(id, part);
 	else if (id->type == MTD_DEV_TYPE_NOR)
 		return part_validate_nor(id, part);
+	else if (id->type == MTD_DEV_TYPE_ONENAND)
+		return part_validate_onenand(id, part);
 	else
 		DEBUGF("part_validate: invalid dev type\n");
 
@@ -726,7 +786,7 @@ static int device_validate(u8 type, u8 num, u32 *size)
 {
 	if (type == MTD_DEV_TYPE_NOR) {
 #if defined(CONFIG_CMD_FLASH)
-		if (num < CFG_MAX_FLASH_BANKS) {
+		if (num < CONFIG_SYS_MAX_FLASH_BANKS) {
 			extern flash_info_t flash_info[];
 			*size = flash_info[num].size;
 
@@ -734,28 +794,36 @@ static int device_validate(u8 type, u8 num, u32 *size)
 		}
 
 		printf("no such FLASH device: %s%d (valid range 0 ... %d\n",
-				MTD_DEV_TYPE(type), num, CFG_MAX_FLASH_BANKS - 1);
+				MTD_DEV_TYPE(type), num, CONFIG_SYS_MAX_FLASH_BANKS - 1);
 #else
 		printf("support for FLASH devices not present\n");
 #endif
 	} else if (type == MTD_DEV_TYPE_NAND) {
 #if defined(CONFIG_JFFS2_NAND) && defined(CONFIG_CMD_NAND)
-		if (num < CFG_MAX_NAND_DEVICE) {
+		if (num < CONFIG_SYS_MAX_NAND_DEVICE) {
 #ifndef CONFIG_NAND_LEGACY
 			*size = nand_info[num].size;
 #else
-			extern struct nand_chip nand_dev_desc[CFG_MAX_NAND_DEVICE];
+			extern struct nand_chip nand_dev_desc[CONFIG_SYS_MAX_NAND_DEVICE];
 			*size = nand_dev_desc[num].totlen;
 #endif
 			return 0;
 		}
 
 		printf("no such NAND device: %s%d (valid range 0 ... %d)\n",
-				MTD_DEV_TYPE(type), num, CFG_MAX_NAND_DEVICE - 1);
+				MTD_DEV_TYPE(type), num, CONFIG_SYS_MAX_NAND_DEVICE - 1);
 #else
 		printf("support for NAND devices not present\n");
 #endif
-	}
+	} else if (type == MTD_DEV_TYPE_ONENAND) {
+#if defined(CONFIG_CMD_ONENAND)
+		*size = onenand_mtd.size;
+		return 0;
+#else
+		printf("support for OneNAND devices not present\n");
+#endif
+	} else
+		printf("Unknown defice type %d\n", type);
 
 	return 1;
 }
@@ -1002,7 +1070,7 @@ static int device_parse(const char *const mtd_dev, const char **ret, struct mtd_
  *
  * @return 0 on success, 1 otherwise
  */
-static int devices_init(void)
+static int jffs2_devices_init(void)
 {
 	last_parts[0] = '\0';
 	current_dev = NULL;
@@ -1065,8 +1133,8 @@ static struct mtdids* id_find_by_mtd_id(const char *mtd_id, unsigned int mtd_id_
 #endif /* #ifdef CONFIG_JFFS2_CMDLINE */
 
 /**
- * Parse device id string <dev-id> := 'nand'|'nor'<dev-num>, return device
- * type and number.
+ * Parse device id string <dev-id> := 'nand'|'nor'|'onenand'<dev-num>,
+ * return device type and number.
  *
  * @param id string describing device id
  * @param ret_id output pointer to next char after parse completes (output)
@@ -1085,6 +1153,9 @@ int id_parse(const char *id, const char **ret_id, u8 *dev_type, u8 *dev_num)
 	} else if (strncmp(p, "nor", 3) == 0) {
 		*dev_type = MTD_DEV_TYPE_NOR;
 		p += 3;
+	} else if (strncmp(p, "onenand", 7) == 0) {
+		*dev_type = MTD_DEV_TYPE_ONENAND;
+		p += 7;
 	} else {
 		printf("incorrect device type in %s\n", id);
 		return 1;
@@ -1414,12 +1485,12 @@ static int parse_mtdparts(const char *const mtdparts)
 	DEBUGF("\n---parse_mtdparts---\nmtdparts = %s\n\n", p);
 
 	/* delete all devices and partitions */
-	if (devices_init() != 0) {
+	if (jffs2_devices_init() != 0) {
 		printf("could not initialise device list\n");
 		return err;
 	}
 
-	/* re-read 'mtdparts' variable, devices_init may be updating env */
+	/* re-read 'mtdparts' variable, jffs2_devices_init may be updating env */
 	p = getenv("mtdparts");
 
 	if (strncmp(p, "mtdparts=", 9) != 0) {
@@ -1489,7 +1560,7 @@ static int parse_mtdids(const char *const ids)
 	while(p && (*p != '\0')) {
 
 		ret = 1;
-		/* parse 'nor'|'nand'<dev-num> */
+		/* parse 'nor'|'nand'|'onenand'<dev-num> */
 		if (id_parse(p, &p, &type, &num) != 0)
 			break;
 
@@ -1641,7 +1712,7 @@ int mtdparts_init(void)
 		ids_changed = 1;
 
 		if (parse_mtdids(ids) != 0) {
-			devices_init();
+			jffs2_devices_init();
 			return 1;
 		}
 
@@ -1674,7 +1745,7 @@ int mtdparts_init(void)
 
 	/* mtdparts variable was reset to NULL, delete all devices/partitions */
 	if (!parts && (last_parts[0] != '\0'))
-		return devices_init();
+		return jffs2_devices_init();
 
 	/* do not process current partition if mtdparts variable is null */
 	if (!parts)
@@ -2048,8 +2119,8 @@ int do_jffs2_mtdparts(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 
 			setenv("mtdparts", NULL);
 
-			/* devices_init() calls current_save() */
-			return devices_init();
+			/* jffs2_devices_init() calls current_save() */
+			return jffs2_devices_init();
 		}
 	}
 
@@ -2181,7 +2252,7 @@ U_BOOT_CMD(
 	"'mtdids' - linux kernel mtd device id <-> u-boot device id mapping\n\n"
 	"mtdids=<idmap>[,<idmap>,...]\n\n"
 	"<idmap>    := <dev-id>=<mtd-id>\n"
-	"<dev-id>   := 'nand'|'nor'<dev-num>\n"
+	"<dev-id>   := 'nand'|'nor'|'onenand'<dev-num>\n"
 	"<dev-num>  := mtd device number, 0...\n"
 	"<mtd-id>   := unique device tag used by linux kernel to find mtd device (mtd->name)\n\n"
 	"'mtdparts' - partition list\n\n"
diff --git a/common/cmd_load.c b/common/cmd_load.c
index f2b73bdc1..65a4d692a 100644
--- a/common/cmd_load.c
+++ b/common/cmd_load.c
@@ -38,7 +38,7 @@ static ulong load_serial_ymodem (ulong offset);
 #endif
 
 #if defined(CONFIG_CMD_LOADS)
-static ulong load_serial (ulong offset);
+static ulong load_serial (long offset);
 static int read_record (char *buf, ulong len);
 # if defined(CONFIG_CMD_SAVES)
 static int save_serial (ulong offset, ulong size);
@@ -53,12 +53,12 @@ static int do_echo = 1;
 #if defined(CONFIG_CMD_LOADS)
 int do_load_serial (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 {
-	ulong offset = 0;
+	long offset = 0;
 	ulong addr;
 	int i;
 	char *env_echo;
 	int rcode = 0;
-#ifdef	CFG_LOADS_BAUD_CHANGE
+#ifdef	CONFIG_SYS_LOADS_BAUD_CHANGE
 	int load_baudrate, current_baudrate;
 
 	load_baudrate = current_baudrate = gd->baudrate;
@@ -70,9 +70,9 @@ int do_load_serial (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 		do_echo = 0;
 	}
 
-#ifdef	CFG_LOADS_BAUD_CHANGE
+#ifdef	CONFIG_SYS_LOADS_BAUD_CHANGE
 	if (argc >= 2) {
-		offset = simple_strtoul(argv[1], NULL, 16);
+		offset = simple_strtol(argv[1], NULL, 16);
 	}
 	if (argc == 3) {
 		load_baudrate = (int)simple_strtoul(argv[2], NULL, 10);
@@ -93,11 +93,11 @@ int do_load_serial (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 				break;
 		}
 	}
-#else	/* ! CFG_LOADS_BAUD_CHANGE */
+#else	/* ! CONFIG_SYS_LOADS_BAUD_CHANGE */
 	if (argc == 2) {
-		offset = simple_strtoul(argv[1], NULL, 16);
+		offset = simple_strtol(argv[1], NULL, 16);
 	}
-#endif	/* CFG_LOADS_BAUD_CHANGE */
+#endif	/* CONFIG_SYS_LOADS_BAUD_CHANGE */
 
 	printf ("## Ready for S-Record download ...\n");
 
@@ -123,7 +123,7 @@ int do_load_serial (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 		load_addr = addr;
 	}
 
-#ifdef	CFG_LOADS_BAUD_CHANGE
+#ifdef	CONFIG_SYS_LOADS_BAUD_CHANGE
 	if (load_baudrate != current_baudrate) {
 		printf ("## Switch baudrate to %d bps and press ESC ...\n",
 			current_baudrate);
@@ -141,7 +141,7 @@ int do_load_serial (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 }
 
 static ulong
-load_serial (ulong offset)
+load_serial (long offset)
 {
 	char	record[SREC_MAXRECLEN + 1];	/* buffer for one S-Record	*/
 	char	binbuf[SREC_MAXBINLEN];		/* buffer for binary data	*/
@@ -167,7 +167,7 @@ load_serial (ulong offset)
 		case SREC_DATA3:
 		case SREC_DATA4:
 		    store_addr = addr + offset;
-#ifndef CFG_NO_FLASH
+#ifndef CONFIG_SYS_NO_FLASH
 		    if (addr2info(store_addr)) {
 			int rc;
 
@@ -259,7 +259,7 @@ int do_save_serial (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 {
 	ulong offset = 0;
 	ulong size   = 0;
-#ifdef	CFG_LOADS_BAUD_CHANGE
+#ifdef	CONFIG_SYS_LOADS_BAUD_CHANGE
 	int save_baudrate, current_baudrate;
 
 	save_baudrate = current_baudrate = gd->baudrate;
@@ -268,7 +268,7 @@ int do_save_serial (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 	if (argc >= 2) {
 		offset = simple_strtoul(argv[1], NULL, 16);
 	}
-#ifdef	CFG_LOADS_BAUD_CHANGE
+#ifdef	CONFIG_SYS_LOADS_BAUD_CHANGE
 	if (argc >= 3) {
 		size = simple_strtoul(argv[2], NULL, 16);
 	}
@@ -291,11 +291,11 @@ int do_save_serial (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 				break;
 		}
 	}
-#else	/* ! CFG_LOADS_BAUD_CHANGE */
+#else	/* ! CONFIG_SYS_LOADS_BAUD_CHANGE */
 	if (argc == 3) {
 		size = simple_strtoul(argv[2], NULL, 16);
 	}
-#endif	/* CFG_LOADS_BAUD_CHANGE */
+#endif	/* CONFIG_SYS_LOADS_BAUD_CHANGE */
 
 	printf ("## Ready for S-Record upload, press ENTER to proceed ...\n");
 	for (;;) {
@@ -307,7 +307,7 @@ int do_save_serial (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 	} else {
 		printf ("## S-Record upload complete\n");
 	}
-#ifdef	CFG_LOADS_BAUD_CHANGE
+#ifdef	CONFIG_SYS_LOADS_BAUD_CHANGE
 	if (save_baudrate != current_baudrate) {
 		printf ("## Switch baudrate to %d bps and press ESC ...\n",
 			(int)current_baudrate);
@@ -441,8 +441,8 @@ int do_load_serial_bin (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 	int rcode = 0;
 	char *s;
 
-	/* pre-set offset from CFG_LOAD_ADDR */
-	offset = CFG_LOAD_ADDR;
+	/* pre-set offset from CONFIG_SYS_LOAD_ADDR */
+	offset = CONFIG_SYS_LOAD_ADDR;
 
 	/* pre-set offset from $loadaddr */
 	if ((s = getenv("loadaddr")) != NULL) {
@@ -1001,7 +1001,7 @@ static ulong load_serial_ymodem (ulong offset)
 			store_addr = addr + offset;
 			size += res;
 			addr += res;
-#ifndef CFG_NO_FLASH
+#ifndef CONFIG_SYS_NO_FLASH
 			if (addr2info (store_addr)) {
 				int rc;
 
@@ -1042,7 +1042,7 @@ static ulong load_serial_ymodem (ulong offset)
 
 #if defined(CONFIG_CMD_LOADS)
 
-#ifdef	CFG_LOADS_BAUD_CHANGE
+#ifdef	CONFIG_SYS_LOADS_BAUD_CHANGE
 U_BOOT_CMD(
 	loads, 3, 0,	do_load_serial,
 	"loads   - load S-Record file over serial line\n",
@@ -1051,14 +1051,14 @@ U_BOOT_CMD(
 	" with offset 'off' and baudrate 'baud'\n"
 );
 
-#else	/* ! CFG_LOADS_BAUD_CHANGE */
+#else	/* ! CONFIG_SYS_LOADS_BAUD_CHANGE */
 U_BOOT_CMD(
 	loads, 2, 0,	do_load_serial,
 	"loads   - load S-Record file over serial line\n",
 	"[ off ]\n"
 	"    - load S-Record file over serial line with offset 'off'\n"
 );
-#endif	/* CFG_LOADS_BAUD_CHANGE */
+#endif	/* CONFIG_SYS_LOADS_BAUD_CHANGE */
 
 /*
  * SAVES always requires LOADS support, but not vice versa
@@ -1066,7 +1066,7 @@ U_BOOT_CMD(
 
 
 #if defined(CONFIG_CMD_SAVES)
-#ifdef	CFG_LOADS_BAUD_CHANGE
+#ifdef	CONFIG_SYS_LOADS_BAUD_CHANGE
 U_BOOT_CMD(
 	saves, 4, 0,	do_save_serial,
 	"saves   - save S-Record file over serial line\n",
@@ -1074,14 +1074,14 @@ U_BOOT_CMD(
 	"    - save S-Record file over serial line"
 	" with offset 'off', size 'size' and baudrate 'baud'\n"
 );
-#else	/* ! CFG_LOADS_BAUD_CHANGE */
+#else	/* ! CONFIG_SYS_LOADS_BAUD_CHANGE */
 U_BOOT_CMD(
 	saves, 3, 0,	do_save_serial,
 	"saves   - save S-Record file over serial line\n",
 	"[ off ] [size]\n"
 	"    - save S-Record file over serial line with offset 'off' and size 'size'\n"
 );
-#endif	/* CFG_LOADS_BAUD_CHANGE */
+#endif	/* CONFIG_SYS_LOADS_BAUD_CHANGE */
 #endif
 #endif
 
diff --git a/common/cmd_log.c b/common/cmd_log.c
index fdcc57571..febdb90cf 100644
--- a/common/cmd_log.c
+++ b/common/cmd_log.c
@@ -68,7 +68,7 @@ static char *lbuf;
 
 unsigned long __logbuffer_base(void)
 {
-	return CFG_SDRAM_BASE + gd->bd->bi_memsize - LOGBUFF_LEN;
+	return CONFIG_SYS_SDRAM_BASE + gd->bd->bi_memsize - LOGBUFF_LEN;
 }
 unsigned long logbuffer_base (void) __attribute__((weak, alias("__logbuffer_base")));
 
diff --git a/common/cmd_mac.c b/common/cmd_mac.c
index faed8f763..4453299fe 100644
--- a/common/cmd_mac.c
+++ b/common/cmd_mac.c
@@ -24,8 +24,6 @@
 #include <common.h>
 #include <command.h>
 
-#ifdef CFG_ID_EEPROM
-
 extern int do_mac(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
 
 U_BOOT_CMD(
@@ -63,4 +61,3 @@ U_BOOT_CMD(
 	"mac 7\n"
 	"    - program the MAC address for port 7\n"
 );
-#endif /* CFG_ID_EEPROM */
diff --git a/common/cmd_mem.c b/common/cmd_mem.c
index 4766c2460..400cfd747 100644
--- a/common/cmd_mem.c
+++ b/common/cmd_mem.c
@@ -37,37 +37,6 @@
 #endif
 #include <watchdog.h>
 
-#if defined(CONFIG_CMD_MEMORY)		\
-    || defined(CONFIG_CMD_I2C)		\
-    || defined(CONFIG_CMD_ITEST)	\
-    || defined(CONFIG_CMD_PCI)		\
-    || defined(CONFIG_CMD_PORTIO)
-
-int cmd_get_data_size(char* arg, int default_size)
-{
-	/* Check for a size specification .b, .w or .l.
-	 */
-	int len = strlen(arg);
-	if (len > 2 && arg[len-2] == '.') {
-		switch(arg[len-1]) {
-		case 'b':
-			return 1;
-		case 'w':
-			return 2;
-		case 'l':
-			return 4;
-		case 's':
-			return -2;
-		default:
-			return -1;
-		}
-	}
-	return default_size;
-}
-#endif
-
-#if defined(CONFIG_CMD_MEMORY)
-
 #ifdef	CMD_MEM_DEBUG
 #define	PRINTF(fmt,args...)	printf (fmt ,##args)
 #else
@@ -414,7 +383,7 @@ int do_mem_cp ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 		return 1;
 	}
 
-#ifndef CFG_NO_FLASH
+#ifndef CONFIG_SYS_NO_FLASH
 	/* check if we are copying to Flash */
 	if ( (addr2info(dest) != NULL)
 #ifdef CONFIG_HAS_DATAFLASH
@@ -494,7 +463,7 @@ int do_mem_cp ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 
 	/* Check if we are copying from DataFlash to RAM */
 	if (addr_dataflash(addr) && !addr_dataflash(dest)
-#ifndef CFG_NO_FLASH
+#ifndef CONFIG_SYS_NO_FLASH
 				 && (addr2info(dest) == NULL)
 #endif
 	   ){
@@ -694,7 +663,7 @@ int do_mem_loopw (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 
 /*
  * Perform a memory test. A more complete alternative test can be
- * configured using CFG_ALT_MEMTEST. The complete test loops until
+ * configured using CONFIG_SYS_ALT_MEMTEST. The complete test loops until
  * interrupted by ctrl-c or by a failure of one of the sub-tests.
  */
 int do_mem_mtest (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
@@ -704,7 +673,7 @@ int do_mem_mtest (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 	ulong	readback;
 	int     rcode = 0;
 
-#if defined(CFG_ALT_MEMTEST)
+#if defined(CONFIG_SYS_ALT_MEMTEST)
 	vu_long	len;
 	vu_long	offset;
 	vu_long	test_offset;
@@ -712,8 +681,8 @@ int do_mem_mtest (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 	vu_long	temp;
 	vu_long	anti_pattern;
 	vu_long	num_words;
-#if defined(CFG_MEMTEST_SCRATCH)
-	vu_long *dummy = (vu_long*)CFG_MEMTEST_SCRATCH;
+#if defined(CONFIG_SYS_MEMTEST_SCRATCH)
+	vu_long *dummy = (vu_long*)CONFIG_SYS_MEMTEST_SCRATCH;
 #else
 	vu_long *dummy = 0;	/* yes, this is address 0x0, not NULL */
 #endif
@@ -738,13 +707,13 @@ int do_mem_mtest (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 	if (argc > 1) {
 		start = (ulong *)simple_strtoul(argv[1], NULL, 16);
 	} else {
-		start = (ulong *)CFG_MEMTEST_START;
+		start = (ulong *)CONFIG_SYS_MEMTEST_START;
 	}
 
 	if (argc > 2) {
 		end = (ulong *)simple_strtoul(argv[2], NULL, 16);
 	} else {
-		end = (ulong *)(CFG_MEMTEST_END);
+		end = (ulong *)(CONFIG_SYS_MEMTEST_END);
 	}
 
 	if (argc > 3) {
@@ -753,7 +722,7 @@ int do_mem_mtest (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 		pattern = 0;
 	}
 
-#if defined(CFG_ALT_MEMTEST)
+#if defined(CONFIG_SYS_ALT_MEMTEST)
 	printf ("Testing %08x ... %08x:\n", (uint)start, (uint)end);
 	PRINTF("%s:%d: start 0x%p end 0x%p\n",
 		__FUNCTION__, __LINE__, start, end);
@@ -1206,7 +1175,6 @@ int do_unzip ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 {
 	unsigned long src, dst;
 	unsigned long src_len = ~0UL, dst_len = ~0UL;
-	int err;
 
 	switch (argc) {
 		case 4:
@@ -1227,7 +1195,6 @@ int do_unzip ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 
 
 /**************************************************/
-#if defined(CONFIG_CMD_MEMORY)
 U_BOOT_CMD(
 	md,	3,	1,	do_mem_md,
 	"md	- memory display\n",
@@ -1336,6 +1303,3 @@ U_BOOT_CMD(
 	"srcaddr dstaddr [dstsize]\n"
 );
 #endif /* CONFIG_CMD_UNZIP */
-
-#endif
-#endif
diff --git a/common/cmd_misc.c b/common/cmd_misc.c
index 126b538ce..3ea8ee07f 100644
--- a/common/cmd_misc.c
+++ b/common/cmd_misc.c
@@ -37,7 +37,7 @@ int do_sleep (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 		return 1;
 	}
 
-	delay = simple_strtoul(argv[1], NULL, 10) * CFG_HZ;
+	delay = simple_strtoul(argv[1], NULL, 10) * CONFIG_SYS_HZ;
 
 	while (get_timer(start) < delay) {
 		if (ctrlc ()) {
diff --git a/common/cmd_mp.c b/common/cmd_mp.c
index c8444fb84..f3a7f49e1 100644
--- a/common/cmd_mp.c
+++ b/common/cmd_mp.c
@@ -82,7 +82,7 @@ cpu_cmd(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 #endif
 
 U_BOOT_CMD(
-	cpu, CFG_MAXARGS, 1, cpu_cmd,
+	cpu, CONFIG_SYS_MAXARGS, 1, cpu_cmd,
 	"cpu     - Multiprocessor CPU boot manipulation and release\n",
 	    "<num> reset                 - Reset cpu <num>\n"
 	"cpu <num> status                - Status of cpu <num>\n"
diff --git a/common/cmd_nand.c b/common/cmd_nand.c
index b94a2bf1d..0a366d32c 100644
--- a/common/cmd_nand.c
+++ b/common/cmd_nand.c
@@ -171,8 +171,8 @@ int do_nand(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
 	size_t size;
 	char *cmd, *s;
 	nand_info_t *nand;
-#ifdef CFG_NAND_QUIET
-	int quiet = CFG_NAND_QUIET;
+#ifdef CONFIG_SYS_NAND_QUIET
+	int quiet = CONFIG_SYS_NAND_QUIET;
 #else
 	int quiet = 0;
 #endif
@@ -190,7 +190,7 @@ int do_nand(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
 	if (strcmp(cmd, "info") == 0) {
 
 		putc('\n');
-		for (i = 0; i < CFG_MAX_NAND_DEVICE; i++) {
+		for (i = 0; i < CONFIG_SYS_MAX_NAND_DEVICE; i++) {
 			if (nand_info[i].name)
 				printf("Device %d: %s, sector size %u KiB\n",
 				       i, nand_info[i].name,
@@ -203,7 +203,7 @@ int do_nand(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
 
 		if (argc < 3) {
 			if ((nand_curr_device < 0) ||
-			    (nand_curr_device >= CFG_MAX_NAND_DEVICE))
+			    (nand_curr_device >= CONFIG_SYS_MAX_NAND_DEVICE))
 				puts("\nno devices available\n");
 			else
 				printf("\nDevice %d: %s\n", nand_curr_device,
@@ -211,7 +211,7 @@ int do_nand(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
 			return 0;
 		}
 		dev = (int)simple_strtoul(argv[2], NULL, 10);
-		if (dev < 0 || dev >= CFG_MAX_NAND_DEVICE || !nand_info[dev].name) {
+		if (dev < 0 || dev >= CONFIG_SYS_MAX_NAND_DEVICE || !nand_info[dev].name) {
 			puts("No such device\n");
 			return 1;
 		}
@@ -219,7 +219,7 @@ int do_nand(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
 		puts("... is now current device\n");
 		nand_curr_device = dev;
 
-#ifdef CFG_NAND_SELECT_DEVICE
+#ifdef CONFIG_SYS_NAND_SELECT_DEVICE
 		/*
 		 * Select the chip in the board/cpu specific driver
 		 */
@@ -238,7 +238,7 @@ int do_nand(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
 		goto usage;
 
 	/* the following commands operate on the current device */
-	if (nand_curr_device < 0 || nand_curr_device >= CFG_MAX_NAND_DEVICE ||
+	if (nand_curr_device < 0 || nand_curr_device >= CONFIG_SYS_MAX_NAND_DEVICE ||
 	    !nand_info[nand_curr_device].name) {
 		puts("\nno devices available\n");
 		return 1;
@@ -469,7 +469,7 @@ usage:
 }
 
 U_BOOT_CMD(nand, 5, 1, do_nand,
-	   "nand - NAND sub-system\n",
+	   "nand    - NAND sub-system\n",
 	   "info - show available NAND devices\n"
 	   "nand device [dev] - show or set current device\n"
 	   "nand read - addr off|partition size\n"
@@ -606,7 +606,7 @@ int do_nandboot(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
 			if (argc == 3)
 				addr = simple_strtoul(argv[1], NULL, 16);
 			else
-				addr = CFG_LOAD_ADDR;
+				addr = CONFIG_SYS_LOAD_ADDR;
 			return nand_load_image(cmdtp, &nand_info[dev->id->num],
 					       part->offset, addr, argv[0]);
 		}
@@ -616,7 +616,7 @@ int do_nandboot(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
 	show_boot_progress(52);
 	switch (argc) {
 	case 1:
-		addr = CFG_LOAD_ADDR;
+		addr = CONFIG_SYS_LOAD_ADDR;
 		boot_device = getenv("bootdevice");
 		break;
 	case 2:
@@ -651,7 +651,7 @@ usage:
 
 	idx = simple_strtoul(boot_device, NULL, 16);
 
-	if (idx < 0 || idx >= CFG_MAX_NAND_DEVICE || !nand_info[idx].name) {
+	if (idx < 0 || idx >= CONFIG_SYS_MAX_NAND_DEVICE || !nand_info[idx].name) {
 		printf("\n** Device %d not available\n", idx);
 		show_boot_progress(-55);
 		return 1;
@@ -728,7 +728,7 @@ void archflashwp(void *archdata, int wp);
 /*
  * Imports from nand_legacy.c
  */
-extern struct nand_chip nand_dev_desc[CFG_MAX_NAND_DEVICE];
+extern struct nand_chip nand_dev_desc[CONFIG_SYS_MAX_NAND_DEVICE];
 extern int curr_device;
 extern int nand_legacy_erase(struct nand_chip *nand, size_t ofs,
 			    size_t len, int clean);
@@ -757,7 +757,7 @@ int do_nand (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
 
 			putc ('\n');
 
-			for (i = 0; i < CFG_MAX_NAND_DEVICE; ++i) {
+			for (i = 0; i < CONFIG_SYS_MAX_NAND_DEVICE; ++i) {
 				if (nand_dev_desc[i].ChipID ==
 				    NAND_ChipID_UNKNOWN)
 					continue;	/* list only known devices */
@@ -768,7 +768,7 @@ int do_nand (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
 
 		} else if (strcmp (argv[1], "device") == 0) {
 			if ((curr_device < 0)
-			    || (curr_device >= CFG_MAX_NAND_DEVICE)) {
+			    || (curr_device >= CONFIG_SYS_MAX_NAND_DEVICE)) {
 				puts ("\nno devices available\n");
 				return 1;
 			}
@@ -778,7 +778,7 @@ int do_nand (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
 
 		} else if (strcmp (argv[1], "bad") == 0) {
 			if ((curr_device < 0)
-			    || (curr_device >= CFG_MAX_NAND_DEVICE)) {
+			    || (curr_device >= CONFIG_SYS_MAX_NAND_DEVICE)) {
 				puts ("\nno devices available\n");
 				return 1;
 			}
@@ -794,7 +794,7 @@ int do_nand (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
 			int dev = (int) simple_strtoul (argv[2], NULL, 10);
 
 			printf ("\nDevice %d: ", dev);
-			if (dev >= CFG_MAX_NAND_DEVICE) {
+			if (dev >= CONFIG_SYS_MAX_NAND_DEVICE) {
 				puts ("unknown device\n");
 				return 1;
 			}
@@ -866,7 +866,7 @@ int do_nand (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
 			else if (cmdtail && !strcmp (cmdtail, ".e"))
 				cmd |= NANDRW_JFFS2;	/* skip bad blocks */
 #endif
-#ifdef CFG_NAND_SKIP_BAD_DOT_I
+#ifdef CONFIG_SYS_NAND_SKIP_BAD_DOT_I
 			/* need ".i" same as ".jffs2s" for compatibility with older units (esd) */
 			/* ".i" for image -> read skips bad block (no 0xff) */
 			else if (cmdtail && !strcmp (cmdtail, ".i")) {
@@ -874,7 +874,7 @@ int do_nand (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
 				if (cmd & NANDRW_READ)
 					cmd |= NANDRW_JFFS2_SKIP;	/* skip bad blocks (on read too) */
 			}
-#endif /* CFG_NAND_SKIP_BAD_DOT_I */
+#endif /* CONFIG_SYS_NAND_SKIP_BAD_DOT_I */
 			else if (cmdtail) {
 				printf ("Usage:\n%s\n", cmdtp->usage);
 				return 1;
@@ -952,7 +952,7 @@ int do_nandboot (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 	show_boot_progress (52);
 	switch (argc) {
 	case 1:
-		addr = CFG_LOAD_ADDR;
+		addr = CONFIG_SYS_LOAD_ADDR;
 		boot_device = getenv ("bootdevice");
 		break;
 	case 2:
@@ -984,7 +984,7 @@ int do_nandboot (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 
 	dev = simple_strtoul(boot_device, &ep, 16);
 
-	if ((dev >= CFG_MAX_NAND_DEVICE) ||
+	if ((dev >= CONFIG_SYS_MAX_NAND_DEVICE) ||
 	    (nand_dev_desc[dev].ChipID == NAND_ChipID_UNKNOWN)) {
 		printf ("\n** Device %d not available\n", dev);
 		show_boot_progress (-55);
diff --git a/common/cmd_net.c b/common/cmd_net.c
index af691a474..c053d7b97 100644
--- a/common/cmd_net.c
+++ b/common/cmd_net.c
@@ -154,8 +154,10 @@ static int
 netboot_common (proto_t proto, cmd_tbl_t *cmdtp, int argc, char *argv[])
 {
 	char *s;
+	char *end;
 	int   rcode = 0;
 	int   size;
+	ulong addr;
 
 	/* pre-set load_addr */
 	if ((s = getenv("loadaddr")) != NULL) {
@@ -166,15 +168,17 @@ netboot_common (proto_t proto, cmd_tbl_t *cmdtp, int argc, char *argv[])
 	case 1:
 		break;
 
-	case 2:	/* only one arg - accept two forms:
-		 * just load address, or just boot file name.
-		 * The latter form must be written "filename" here.
+	case 2:	/*
+		 * Only one arg - accept two forms:
+		 * Just load address, or just boot file name. The latter
+		 * form must be written in a format which can not be
+		 * mis-interpreted as a valid number.
 		 */
-		if (argv[1][0] == '"') {	/* just boot filename */
-			copy_filename (BootFile, argv[1], sizeof(BootFile));
-		} else {			/* load address	*/
-			load_addr = simple_strtoul(argv[1], NULL, 16);
-		}
+		addr = simple_strtoul(argv[1], &end, 16);
+		if (end == (argv[1] + strlen(argv[1])))
+			load_addr = addr;
+		else
+			copy_filename(BootFile, argv[1], sizeof(BootFile));
 		break;
 
 	case 3:	load_addr = simple_strtoul(argv[1], NULL, 16);
diff --git a/common/cmd_nvedit.c b/common/cmd_nvedit.c
index 70897062a..85025daec 100644
--- a/common/cmd_nvedit.c
+++ b/common/cmd_nvedit.c
@@ -52,15 +52,15 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
-#if !defined(CFG_ENV_IS_IN_NVRAM)	&& \
-    !defined(CFG_ENV_IS_IN_EEPROM)	&& \
-    !defined(CFG_ENV_IS_IN_FLASH)	&& \
-    !defined(CFG_ENV_IS_IN_DATAFLASH)	&& \
-    !defined(CFG_ENV_IS_IN_NAND)	&& \
-    !defined(CFG_ENV_IS_IN_ONENAND)	&& \
-    !defined(CFG_ENV_IS_IN_SPI_FLASH)	&& \
-    !defined(CFG_ENV_IS_NOWHERE)
-# error Define one of CFG_ENV_IS_IN_{NVRAM|EEPROM|FLASH|DATAFLASH|ONENAND|SPI_FLASH|NOWHERE}
+#if !defined(CONFIG_ENV_IS_IN_NVRAM)	&& \
+    !defined(CONFIG_ENV_IS_IN_EEPROM)	&& \
+    !defined(CONFIG_ENV_IS_IN_FLASH)	&& \
+    !defined(CONFIG_ENV_IS_IN_DATAFLASH)	&& \
+    !defined(CONFIG_ENV_IS_IN_NAND)	&& \
+    !defined(CONFIG_ENV_IS_IN_ONENAND)	&& \
+    !defined(CONFIG_ENV_IS_IN_SPI_FLASH)	&& \
+    !defined(CONFIG_ENV_IS_NOWHERE)
+# error Define one of CONFIG_ENV_IS_IN_{NVRAM|EEPROM|FLASH|DATAFLASH|ONENAND|SPI_FLASH|NOWHERE}
 #endif
 
 #define XMK_STR(x)	#x
@@ -72,7 +72,7 @@ DECLARE_GLOBAL_DATA_PTR;
 /*
  * Table with supported baudrates (defined in config_xyz.h)
  */
-static const unsigned long baudrate_table[] = CFG_BAUDRATE_TABLE;
+static const unsigned long baudrate_table[] = CONFIG_SYS_BAUDRATE_TABLE;
 #define	N_BAUDRATES (sizeof(baudrate_table) / sizeof(baudrate_table[0]))
 
 
@@ -213,6 +213,11 @@ int _do_setenv (int flag, int argc, char *argv[])
 				return 1;
 			}
 
+#ifdef CONFIG_CONSOLE_MUX
+			i = iomux_doenv(console, argv[2]);
+			if (i)
+				return i;
+#else
 			/* Try assigning specified device */
 			if (console_assign (console, argv[2]) < 0)
 				return 1;
@@ -221,6 +226,7 @@ int _do_setenv (int flag, int argc, char *argv[])
 			if (serial_assign (argv[2]) < 0)
 				return 1;
 #endif
+#endif /* CONFIG_CONSOLE_MUX */
 		}
 
 		/*
@@ -416,9 +422,9 @@ int do_setenv (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 #if defined(CONFIG_CMD_ASKENV)
 int do_askenv ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 {
-	extern char console_buffer[CFG_CBSIZE];
-	char message[CFG_CBSIZE];
-	int size = CFG_CBSIZE - 1;
+	extern char console_buffer[CONFIG_SYS_CBSIZE];
+	char message[CONFIG_SYS_CBSIZE];
+	int size = CONFIG_SYS_CBSIZE - 1;
 	int len;
 	char *local_args[4];
 
@@ -464,8 +470,8 @@ int do_askenv ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 		break;
 	}
 
-	if (size >= CFG_CBSIZE)
-		size = CFG_CBSIZE - 1;
+	if (size >= CONFIG_SYS_CBSIZE)
+		size = CONFIG_SYS_CBSIZE - 1;
 
 	if (size <= 0)
 		return 1;
@@ -503,7 +509,7 @@ char *getenv (char *name)
 		int val;
 
 		for (nxt=i; env_get_char(nxt) != '\0'; ++nxt) {
-			if (nxt >= CFG_ENV_SIZE) {
+			if (nxt >= CONFIG_ENV_SIZE) {
 				return (NULL);
 			}
 		}
@@ -523,7 +529,7 @@ int getenv_r (char *name, char *buf, unsigned len)
 		int val, n;
 
 		for (nxt=i; env_get_char(nxt) != '\0'; ++nxt) {
-			if (nxt >= CFG_ENV_SIZE) {
+			if (nxt >= CONFIG_ENV_SIZE) {
 				return (-1);
 			}
 		}
@@ -540,11 +546,11 @@ int getenv_r (char *name, char *buf, unsigned len)
 	return (-1);
 }
 
-#if ((defined(CFG_ENV_IS_IN_NVRAM) || defined(CFG_ENV_IS_IN_EEPROM) \
+#if ((defined(CONFIG_ENV_IS_IN_NVRAM) || defined(CONFIG_ENV_IS_IN_EEPROM) \
     || (defined(CONFIG_CMD_ENV) && defined(CONFIG_CMD_FLASH)) \
     || (defined(CONFIG_CMD_ENV) && defined(CONFIG_CMD_NAND)) \
     || (defined(CONFIG_CMD_ENV) && defined(CONFIG_CMD_ONENAND))) \
-    && !defined(CFG_ENV_IS_NOWHERE))
+    && !defined(CONFIG_ENV_IS_NOWHERE))
 int do_saveenv (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 {
 	extern char * env_name_spec;
@@ -580,7 +586,7 @@ int envmatch (uchar *s1, int i2)
 /**************************************************/
 
 U_BOOT_CMD(
-	printenv, CFG_MAXARGS, 1,	do_printenv,
+	printenv, CONFIG_SYS_MAXARGS, 1,	do_printenv,
 	"printenv- print environment variables\n",
 	"\n    - print values of all environment variables\n"
 	"printenv name ...\n"
@@ -588,7 +594,7 @@ U_BOOT_CMD(
 );
 
 U_BOOT_CMD(
-	setenv, CFG_MAXARGS, 0,	do_setenv,
+	setenv, CONFIG_SYS_MAXARGS, 0,	do_setenv,
 	"setenv  - set environment variables\n",
 	"name value ...\n"
 	"    - set environment variable 'name' to 'value ...'\n"
@@ -596,11 +602,11 @@ U_BOOT_CMD(
 	"    - delete environment variable 'name'\n"
 );
 
-#if ((defined(CFG_ENV_IS_IN_NVRAM) || defined(CFG_ENV_IS_IN_EEPROM) \
+#if ((defined(CONFIG_ENV_IS_IN_NVRAM) || defined(CONFIG_ENV_IS_IN_EEPROM) \
     || (defined(CONFIG_CMD_ENV) && defined(CONFIG_CMD_FLASH)) \
     || (defined(CONFIG_CMD_ENV) && defined(CONFIG_CMD_NAND)) \
     || (defined(CONFIG_CMD_ENV) && defined(CONFIG_CMD_ONENAND))) \
-    && !defined(CFG_ENV_IS_NOWHERE))
+    && !defined(CONFIG_ENV_IS_NOWHERE))
 U_BOOT_CMD(
 	saveenv, 1, 0,	do_saveenv,
 	"saveenv - save environment variables to persistent storage\n",
@@ -612,7 +618,7 @@ U_BOOT_CMD(
 #if defined(CONFIG_CMD_ASKENV)
 
 U_BOOT_CMD(
-	askenv,	CFG_MAXARGS,	1,	do_askenv,
+	askenv,	CONFIG_SYS_MAXARGS,	1,	do_askenv,
 	"askenv  - get environment variables from stdin\n",
 	"name [message] [size]\n"
 	"    - get environment variable 'name' from stdin (max 'size' chars)\n"
@@ -629,7 +635,7 @@ U_BOOT_CMD(
 #if defined(CONFIG_CMD_RUN)
 int do_run (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
 U_BOOT_CMD(
-	run,	CFG_MAXARGS,	1,	do_run,
+	run,	CONFIG_SYS_MAXARGS,	1,	do_run,
 	"run     - run commands in an environment variable\n",
 	"var [...]\n"
 	"    - run the commands in the environment variable(s) 'var'\n"
diff --git a/common/cmd_pci.c b/common/cmd_pci.c
index 89687015b..67ff2fbc3 100644
--- a/common/cmd_pci.c
+++ b/common/cmd_pci.c
@@ -35,8 +35,6 @@
 #include <asm/io.h>
 #include <pci.h>
 
-extern int cmd_get_data_size(char* arg, int default_size);
-
 unsigned char	ShortPCIListing = 1;
 
 /*
@@ -50,7 +48,7 @@ void pci_header_show_brief(pci_dev_t dev);
  * Subroutine:  pciinfo
  *
  * Description: Show information about devices on PCI bus.
- *				Depending on the define CFG_SHORT_PCI_LISTING
+ *				Depending on the define CONFIG_SYS_SHORT_PCI_LISTING
  *				the output will be more or less exhaustive.
  *
  * Inputs:	bus_no		the number of the bus to be scanned.
diff --git a/common/cmd_pcmcia.c b/common/cmd_pcmcia.c
index dcd07c05e..23fad3bcb 100644
--- a/common/cmd_pcmcia.c
+++ b/common/cmd_pcmcia.c
@@ -278,8 +278,8 @@ int check_ide_device (int slot)
 	int found = 0;
 	int i;
 
-	addr = (volatile uchar *)(CFG_PCMCIA_MEM_ADDR +
-				  CFG_PCMCIA_MEM_SIZE * (slot * 4));
+	addr = (volatile uchar *)(CONFIG_SYS_PCMCIA_MEM_ADDR +
+				  CONFIG_SYS_PCMCIA_MEM_SIZE * (slot * 4));
 	debug ("PCMCIA MEM: %08lX\n", (ulong)addr);
 
 	start = p = (volatile uchar *) addr;
diff --git a/common/cmd_portio.c b/common/cmd_portio.c
index a06cac016..c88fcd5e4 100644
--- a/common/cmd_portio.c
+++ b/common/cmd_portio.c
@@ -30,8 +30,6 @@
 #include <common.h>
 #include <command.h>
 
-extern int cmd_get_data_size (char *arg, int default_size);
-
 /* Display values from last command.
  * Memory modify remembered values are different from display memory.
  */
diff --git a/common/cmd_reginfo.c b/common/cmd_reginfo.c
index c0a145991..4c8e61ab2 100644
--- a/common/cmd_reginfo.c
+++ b/common/cmd_reginfo.c
@@ -38,7 +38,7 @@ extern void mpc86xx_reginfo(void);
 int do_reginfo (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 {
 #if defined(CONFIG_8xx)
-	volatile immap_t     *immap  = (immap_t *)CFG_IMMR;
+	volatile immap_t     *immap  = (immap_t *)CONFIG_SYS_IMMR;
 	volatile memctl8xx_t *memctl = &immap->im_memctl;
 	volatile sysconf8xx_t *sysconf = &immap->im_siu_conf;
 	volatile sit8xx_t *timers = &immap->im_sit;
@@ -244,7 +244,7 @@ int do_reginfo (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 	puts ("\n\n");
 #elif defined(CONFIG_5xx)
 
-	volatile immap_t	*immap  = (immap_t *)CFG_IMMR;
+	volatile immap_t	*immap  = (immap_t *)CONFIG_SYS_IMMR;
 	volatile memctl5xx_t	*memctl = &immap->im_memctl;
 	volatile sysconf5xx_t	*sysconf = &immap->im_siu_conf;
 	volatile sit5xx_t	*timers = &immap->im_sit;
@@ -279,7 +279,7 @@ int do_reginfo (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 
 #elif defined(CONFIG_MPC5200)
 	puts ("\nMPC5200 registers\n");
-	printf ("MBAR=%08x\n", CFG_MBAR);
+	printf ("MBAR=%08x\n", CONFIG_SYS_MBAR);
 	puts ("Memory map registers\n");
 	printf ("\tCS0: start %08lX\tstop %08lX\tconfig %08lX\ten %d\n",
 		*(volatile ulong*)MPC5XXX_CS0_START,
diff --git a/common/cmd_reiser.c b/common/cmd_reiser.c
index b7395d795..4f4117ec7 100644
--- a/common/cmd_reiser.c
+++ b/common/cmd_reiser.c
@@ -128,7 +128,7 @@ int do_reiserload (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 		if (addr_str != NULL) {
 			addr = simple_strtoul (addr_str, NULL, 16);
 		} else {
-			addr = CFG_LOAD_ADDR;
+			addr = CONFIG_SYS_LOAD_ADDR;
 		}
 		filename = getenv ("bootfile");
 		count = 0;
diff --git a/common/cmd_sata.c b/common/cmd_sata.c
index 79c2495d6..dd6f1d9a5 100644
--- a/common/cmd_sata.c
+++ b/common/cmd_sata.c
@@ -29,14 +29,14 @@
 #include <sata.h>
 
 int curr_device = -1;
-block_dev_desc_t sata_dev_desc[CFG_SATA_MAX_DEVICE];
+block_dev_desc_t sata_dev_desc[CONFIG_SYS_SATA_MAX_DEVICE];
 
 int sata_initialize(void)
 {
 	int rc;
 	int i;
 
-	for (i = 0; i < CFG_SATA_MAX_DEVICE; i++) {
+	for (i = 0; i < CONFIG_SYS_SATA_MAX_DEVICE; i++) {
 		memset(&sata_dev_desc[i], 0, sizeof(struct block_dev_desc));
 		sata_dev_desc[i].if_type = IF_TYPE_SATA;
 		sata_dev_desc[i].dev = i;
@@ -58,7 +58,7 @@ int sata_initialize(void)
 
 block_dev_desc_t *sata_get_dev(int dev)
 {
-	return (dev < CFG_SATA_MAX_DEVICE) ? &sata_dev_desc[dev] : NULL;
+	return (dev < CONFIG_SYS_SATA_MAX_DEVICE) ? &sata_dev_desc[dev] : NULL;
 }
 
 int do_sata(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
@@ -74,7 +74,7 @@ int do_sata(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 		if (strncmp(argv[1],"inf", 3) == 0) {
 			int i;
 			putc('\n');
-			for (i = 0; i < CFG_SATA_MAX_DEVICE; ++i) {
+			for (i = 0; i < CONFIG_SYS_SATA_MAX_DEVICE; ++i) {
 				if (sata_dev_desc[i].type == DEV_TYPE_UNKNOWN)
 					continue;
 				printf ("SATA device %d: ", i);
@@ -82,7 +82,7 @@ int do_sata(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 			}
 			return 0;
 		} else if (strncmp(argv[1],"dev", 3) == 0) {
-			if ((curr_device < 0) || (curr_device >= CFG_SATA_MAX_DEVICE)) {
+			if ((curr_device < 0) || (curr_device >= CONFIG_SYS_SATA_MAX_DEVICE)) {
 				puts("\nno SATA devices available\n");
 				return 1;
 			}
@@ -92,7 +92,7 @@ int do_sata(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 		} else if (strncmp(argv[1],"part",4) == 0) {
 			int dev, ok;
 
-			for (ok = 0, dev = 0; dev < CFG_SATA_MAX_DEVICE; ++dev) {
+			for (ok = 0, dev = 0; dev < CONFIG_SYS_SATA_MAX_DEVICE; ++dev) {
 				if (sata_dev_desc[dev].part_type != PART_TYPE_UNKNOWN) {
 					++ok;
 					if (dev)
@@ -113,7 +113,7 @@ int do_sata(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 			int dev = (int)simple_strtoul(argv[2], NULL, 10);
 
 			printf("\nSATA device %d: ", dev);
-			if (dev >= CFG_SATA_MAX_DEVICE) {
+			if (dev >= CONFIG_SYS_SATA_MAX_DEVICE) {
 				puts ("unknown device\n");
 				return 1;
 			}
diff --git a/common/cmd_scsi.c b/common/cmd_scsi.c
index f3574650c..066fd804a 100644
--- a/common/cmd_scsi.c
+++ b/common/cmd_scsi.c
@@ -59,7 +59,7 @@ static int scsi_max_devs; /* number of highest available scsi device */
 
 static int scsi_curr_dev; /* current device */
 
-static block_dev_desc_t scsi_dev_desc[CFG_SCSI_MAX_DEVICE];
+static block_dev_desc_t scsi_dev_desc[CONFIG_SYS_SCSI_MAX_DEVICE];
 
 /********************************************************************************
  *  forward declerations of some Setup Routines
@@ -88,7 +88,7 @@ void scsi_scan(int mode)
 	if(mode==1) {
 		printf("scanning bus for devices...\n");
 	}
-	for(i=0;i<CFG_SCSI_MAX_DEVICE;i++) {
+	for(i=0;i<CONFIG_SYS_SCSI_MAX_DEVICE;i++) {
 		scsi_dev_desc[i].target=0xff;
 		scsi_dev_desc[i].lun=0xff;
 		scsi_dev_desc[i].lba=0;
@@ -104,9 +104,9 @@ void scsi_scan(int mode)
 		scsi_dev_desc[i].block_read=scsi_read;
 	}
 	scsi_max_devs=0;
-	for(i=0;i<CFG_SCSI_MAX_SCSI_ID;i++) {
+	for(i=0;i<CONFIG_SYS_SCSI_MAX_SCSI_ID;i++) {
 		pccb->target=i;
-		for(lun=0;lun<CFG_SCSI_MAX_LUN;lun++) {
+		for(lun=0;lun<CONFIG_SYS_SCSI_MAX_LUN;lun++) {
 			pccb->lun=lun;
 			pccb->pdata=(unsigned char *)&tempbuff;
 			pccb->datalen=512;
@@ -195,7 +195,7 @@ void scsi_init(void)
 
 block_dev_desc_t * scsi_get_dev(int dev)
 {
-	return (dev < CFG_SCSI_MAX_DEVICE) ? &scsi_dev_desc[dev] : NULL;
+	return (dev < CONFIG_SYS_SCSI_MAX_DEVICE) ? &scsi_dev_desc[dev] : NULL;
 }
 
 
@@ -217,7 +217,7 @@ int do_scsiboot (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 
 	switch (argc) {
 	case 1:
-		addr = CFG_LOAD_ADDR;
+		addr = CONFIG_SYS_LOAD_ADDR;
 		boot_device = getenv ("bootdevice");
 		break;
 	case 2:
@@ -356,7 +356,7 @@ int do_scsi (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 			}
 			if (strncmp(argv[1],"inf",3) == 0) {
 				int i;
-				for (i=0; i<CFG_SCSI_MAX_DEVICE; ++i) {
+				for (i=0; i<CONFIG_SYS_SCSI_MAX_DEVICE; ++i) {
 					if(scsi_dev_desc[i].type==DEV_TYPE_UNKNOWN)
 						continue; /* list only known devices */
 					printf ("SCSI dev. %d:  ", i);
@@ -365,7 +365,7 @@ int do_scsi (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 				return 0;
 			}
 			if (strncmp(argv[1],"dev",3) == 0) {
-				if ((scsi_curr_dev < 0) || (scsi_curr_dev >= CFG_SCSI_MAX_DEVICE)) {
+				if ((scsi_curr_dev < 0) || (scsi_curr_dev >= CONFIG_SYS_SCSI_MAX_DEVICE)) {
 					printf("\nno SCSI devices available\n");
 					return 1;
 				}
@@ -379,7 +379,7 @@ int do_scsi (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 			}
 			if (strncmp(argv[1],"part",4) == 0) {
 				int dev, ok;
-				for (ok=0, dev=0; dev<CFG_SCSI_MAX_DEVICE; ++dev) {
+				for (ok=0, dev=0; dev<CONFIG_SYS_SCSI_MAX_DEVICE; ++dev) {
 					if (scsi_dev_desc[dev].type!=DEV_TYPE_UNKNOWN) {
 						ok++;
 						if (dev)
@@ -398,7 +398,7 @@ int do_scsi (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 			if (strncmp(argv[1],"dev",3) == 0) {
 				int dev = (int)simple_strtoul(argv[2], NULL, 10);
 				printf ("\nSCSI device %d: ", dev);
-				if (dev >= CFG_SCSI_MAX_DEVICE) {
+				if (dev >= CONFIG_SYS_SCSI_MAX_DEVICE) {
 					printf("unknown device\n");
 					return 1;
 				}
diff --git a/common/cmd_spi.c b/common/cmd_spi.c
index 40ee7e7dd..1f0727b4a 100644
--- a/common/cmd_spi.c
+++ b/common/cmd_spi.c
@@ -123,9 +123,8 @@ int do_spi (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 		printf("Error with the SPI transaction.\n");
 		rcode = 1;
 	} else {
-		cp = (char *)din;
 		for(j = 0; j < ((bitlen + 7) / 8); j++) {
-			printf("%02X", *cp++);
+			printf("%02X", din[j]);
 		}
 		printf("\n");
 	}
diff --git a/common/cmd_strings.c b/common/cmd_strings.c
index bbf56a033..7d05cf8e9 100644
--- a/common/cmd_strings.c
+++ b/common/cmd_strings.c
@@ -10,8 +10,6 @@
 #include <common.h>
 #include <command.h>
 
-#ifdef CONFIG_CFG_STRINGS
-
 static char *start_addr, *last_addr;
 
 int do_strings(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
@@ -31,7 +29,8 @@ int do_strings(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 
 	char *addr = start_addr;
 	do {
-		printf("%s\n", addr);
+		puts(addr);
+		puts("\n");
 		addr += strlen(addr) + 1;
 	} while (addr[0] && addr < last_addr);
 
@@ -45,5 +44,3 @@ U_BOOT_CMD(strings, 3, 1, do_strings,
 	"strings - display strings\n",
 	"<addr> [byte count]\n"
 	"    - display strings at <addr> for at least [byte count] or first double NUL\n");
-
-#endif
diff --git a/common/cmd_ubi.c b/common/cmd_ubi.c
new file mode 100644
index 000000000..5c31f7b49
--- /dev/null
+++ b/common/cmd_ubi.c
@@ -0,0 +1,620 @@
+/*
+ * Unsorted Block Image commands
+ *
+ *  Copyright (C) 2008 Samsung Electronics
+ *  Kyungmin Park <kyungmin.park@samsung.com>
+ *
+ * Copyright 2008 Stefan Roese <sr@denx.de>, DENX Software Engineering
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <common.h>
+#include <command.h>
+#include <exports.h>
+
+#include <nand.h>
+#include <onenand_uboot.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <ubi_uboot.h>
+#include <asm/errno.h>
+#include <jffs2/load_kernel.h>
+
+#define DEV_TYPE_NONE		0
+#define DEV_TYPE_NAND		1
+#define DEV_TYPE_ONENAND	2
+#define DEV_TYPE_NOR		3
+
+/* Private own data */
+static struct ubi_device *ubi;
+static char buffer[80];
+static int ubi_initialized;
+
+struct selected_dev {
+	char dev_name[32];	/* NAND/OneNAND etc */
+	char part_name[80];
+	int type;
+	int nr;
+	struct mtd_info *mtd_info;
+};
+
+static struct selected_dev ubi_dev;
+
+static void ubi_dump_vol_info(const struct ubi_volume *vol)
+{
+	ubi_msg("volume information dump:");
+	ubi_msg("vol_id          %d", vol->vol_id);
+	ubi_msg("reserved_pebs   %d", vol->reserved_pebs);
+	ubi_msg("alignment       %d", vol->alignment);
+	ubi_msg("data_pad        %d", vol->data_pad);
+	ubi_msg("vol_type        %d", vol->vol_type);
+	ubi_msg("name_len        %d", vol->name_len);
+	ubi_msg("usable_leb_size %d", vol->usable_leb_size);
+	ubi_msg("used_ebs        %d", vol->used_ebs);
+	ubi_msg("used_bytes      %lld", vol->used_bytes);
+	ubi_msg("last_eb_bytes   %d", vol->last_eb_bytes);
+	ubi_msg("corrupted       %d", vol->corrupted);
+	ubi_msg("upd_marker      %d", vol->upd_marker);
+
+	if (vol->name_len <= UBI_VOL_NAME_MAX &&
+		strnlen(vol->name, vol->name_len + 1) == vol->name_len) {
+		ubi_msg("name            %s", vol->name);
+	} else {
+		ubi_msg("the 1st 5 characters of the name: %c%c%c%c%c",
+				vol->name[0], vol->name[1], vol->name[2],
+				vol->name[3], vol->name[4]);
+	}
+	printf("\n");
+}
+
+static void display_volume_info(struct ubi_device *ubi)
+{
+	int i;
+
+	for (i = 0; i < (ubi->vtbl_slots + 1); i++) {
+		if (!ubi->volumes[i])
+			continue;	/* Empty record */
+		ubi_dump_vol_info(ubi->volumes[i]);
+	}
+}
+
+static void display_ubi_info(struct ubi_device *ubi)
+{
+	ubi_msg("MTD device name:            \"%s\"", ubi->mtd->name);
+	ubi_msg("MTD device size:            %llu MiB", ubi->flash_size >> 20);
+	ubi_msg("physical eraseblock size:   %d bytes (%d KiB)",
+			ubi->peb_size, ubi->peb_size >> 10);
+	ubi_msg("logical eraseblock size:    %d bytes", ubi->leb_size);
+	ubi_msg("number of good PEBs:        %d", ubi->good_peb_count);
+	ubi_msg("number of bad PEBs:         %d", ubi->bad_peb_count);
+	ubi_msg("smallest flash I/O unit:    %d", ubi->min_io_size);
+	ubi_msg("VID header offset:          %d (aligned %d)",
+			ubi->vid_hdr_offset, ubi->vid_hdr_aloffset);
+	ubi_msg("data offset:                %d", ubi->leb_start);
+	ubi_msg("max. allowed volumes:       %d", ubi->vtbl_slots);
+	ubi_msg("wear-leveling threshold:    %d", CONFIG_MTD_UBI_WL_THRESHOLD);
+	ubi_msg("number of internal volumes: %d", UBI_INT_VOL_COUNT);
+	ubi_msg("number of user volumes:     %d",
+			ubi->vol_count - UBI_INT_VOL_COUNT);
+	ubi_msg("available PEBs:             %d", ubi->avail_pebs);
+	ubi_msg("total number of reserved PEBs: %d", ubi->rsvd_pebs);
+	ubi_msg("number of PEBs reserved for bad PEB handling: %d",
+			ubi->beb_rsvd_pebs);
+	ubi_msg("max/mean erase counter: %d/%d", ubi->max_ec, ubi->mean_ec);
+}
+
+static int ubi_info(int layout)
+{
+	if (layout)
+		display_volume_info(ubi);
+	else
+		display_ubi_info(ubi);
+
+	return 0;
+}
+
+static int verify_mkvol_req(const struct ubi_device *ubi,
+			    const struct ubi_mkvol_req *req)
+{
+	int n, err = -EINVAL;
+
+	if (req->bytes < 0 || req->alignment < 0 || req->vol_type < 0 ||
+	    req->name_len < 0)
+		goto bad;
+
+	if ((req->vol_id < 0 || req->vol_id >= ubi->vtbl_slots) &&
+	    req->vol_id != UBI_VOL_NUM_AUTO)
+		goto bad;
+
+	if (req->alignment == 0)
+		goto bad;
+
+	if (req->bytes == 0)
+		goto bad;
+
+	if (req->vol_type != UBI_DYNAMIC_VOLUME &&
+	    req->vol_type != UBI_STATIC_VOLUME)
+		goto bad;
+
+	if (req->alignment > ubi->leb_size)
+		goto bad;
+
+	n = req->alignment % ubi->min_io_size;
+	if (req->alignment != 1 && n)
+		goto bad;
+
+	if (req->name_len > UBI_VOL_NAME_MAX) {
+		err = -ENAMETOOLONG;
+		goto bad;
+	}
+
+	return 0;
+bad:
+	printf("bad volume creation request");
+	return err;
+}
+
+static int ubi_create_vol(char *volume, int size, int dynamic)
+{
+	struct ubi_mkvol_req req;
+	int err;
+
+	if (dynamic)
+		req.vol_type = UBI_DYNAMIC_VOLUME;
+	else
+		req.vol_type = UBI_STATIC_VOLUME;
+
+	req.vol_id = UBI_VOL_NUM_AUTO;
+	req.alignment = 1;
+	req.bytes = size;
+
+	strcpy(req.name, volume);
+	req.name_len = strlen(volume);
+	req.name[req.name_len] = '\0';
+	req.padding1 = 0;
+	/* It's duplicated at drivers/mtd/ubi/cdev.c */
+	err = verify_mkvol_req(ubi, &req);
+	if (err) {
+		printf("verify_mkvol_req failed %d\n", err);
+		return err;
+	}
+	printf("Creating %s volume %s of size %d\n",
+		dynamic ? "dynamic" : "static", volume, size);
+	/* Call real ubi create volume */
+	return ubi_create_volume(ubi, &req);
+}
+
+static int ubi_remove_vol(char *volume)
+{
+	int i, err, reserved_pebs;
+	int found = 0, vol_id = 0;
+	struct ubi_volume *vol;
+
+	for (i = 0; i < ubi->vtbl_slots; i++) {
+		vol = ubi->volumes[i];
+		if (vol && !strcmp(vol->name, volume)) {
+			printf("Volume %s found at valid %d\n", volume, i);
+			vol_id = i;
+			found = 1;
+			break;
+		}
+	}
+	if (!found) {
+		printf("%s volume not found\n", volume);
+		return -ENODEV;
+	}
+	printf("remove UBI volume %s (id %d)\n", vol->name, vol->vol_id);
+
+	if (ubi->ro_mode) {
+		printf("It's read-only mode\n");
+		err = -EROFS;
+		goto out_err;
+	}
+
+	err = ubi_change_vtbl_record(ubi, vol_id, NULL);
+	if (err) {
+		printf("Error changing Vol tabel record err=%x\n", err);
+		goto out_err;
+	}
+	reserved_pebs = vol->reserved_pebs;
+	for (i = 0; i < vol->reserved_pebs; i++) {
+		err = ubi_eba_unmap_leb(ubi, vol, i);
+		if (err)
+			goto out_err;
+	}
+
+	kfree(vol->eba_tbl);
+	ubi->volumes[vol_id]->eba_tbl = NULL;
+	ubi->volumes[vol_id] = NULL;
+
+	ubi->rsvd_pebs -= reserved_pebs;
+	ubi->avail_pebs += reserved_pebs;
+	i = ubi->beb_rsvd_level - ubi->beb_rsvd_pebs;
+	if (i > 0) {
+		i = ubi->avail_pebs >= i ? i : ubi->avail_pebs;
+		ubi->avail_pebs -= i;
+		ubi->rsvd_pebs += i;
+		ubi->beb_rsvd_pebs += i;
+		if (i > 0)
+			ubi_msg("reserve more %d PEBs", i);
+	}
+	ubi->vol_count -= 1;
+
+	return 0;
+out_err:
+	ubi_err("cannot remove volume %d, error %d", vol_id, err);
+	return err;
+}
+
+static int ubi_volume_write(char *volume, void *buf, size_t size)
+{
+	int i = 0, err = -1;
+	int rsvd_bytes = 0;
+	int found = 0;
+	struct ubi_volume *vol;
+
+	for (i = 0; i < ubi->vtbl_slots; i++) {
+		vol = ubi->volumes[i];
+		if (vol && !strcmp(vol->name, volume)) {
+			printf("Volume \"%s\" found at volume id %d\n", volume, i);
+			found = 1;
+			break;
+		}
+	}
+	if (!found) {
+		printf("%s volume not found\n", volume);
+		return 1;
+	}
+	rsvd_bytes = vol->reserved_pebs * (ubi->leb_size - vol->data_pad);
+	if (size < 0 || size > rsvd_bytes) {
+		printf("rsvd_bytes=%d vol->reserved_pebs=%d ubi->leb_size=%d\n",
+		     rsvd_bytes, vol->reserved_pebs, ubi->leb_size);
+		printf("vol->data_pad=%d\n", vol->data_pad);
+		printf("Size > volume size !!\n");
+		return 1;
+	}
+
+	err = ubi_start_update(ubi, vol, size);
+	if (err < 0) {
+		printf("Cannot start volume update\n");
+		return err;
+	}
+
+	err = ubi_more_update_data(ubi, vol, buf, size);
+	if (err < 0) {
+		printf("Couldnt or partially wrote data \n");
+		return err;
+	}
+
+	if (err) {
+		size = err;
+
+		err = ubi_check_volume(ubi, vol->vol_id);
+		if ( err < 0 )
+			return err;
+
+		if (err) {
+			ubi_warn("volume %d on UBI device %d is corrupted",
+					vol->vol_id, ubi->ubi_num);
+			vol->corrupted = 1;
+		}
+
+		vol->checked = 1;
+		ubi_gluebi_updated(vol);
+	}
+
+	return 0;
+}
+
+static int ubi_volume_read(char *volume, char *buf, size_t size)
+{
+	int err, lnum, off, len, tbuf_size, i = 0;
+	size_t count_save = size;
+	void *tbuf;
+	unsigned long long tmp;
+	struct ubi_volume *vol = NULL;
+	loff_t offp = 0;
+
+	for (i = 0; i < ubi->vtbl_slots; i++) {
+		vol = ubi->volumes[i];
+		if (vol && !strcmp(vol->name, volume)) {
+			printf("Volume %s found at volume id %d\n",
+				volume, vol->vol_id);
+			break;
+		}
+	}
+	if (i == ubi->vtbl_slots) {
+		printf("%s volume not found\n", volume);
+		return 0;
+	}
+
+	printf("read %i bytes from volume %d to %x(buf address)\n",
+	       (int) size, vol->vol_id, (unsigned)buf);
+
+	if (vol->updating) {
+		printf("updating");
+		return -EBUSY;
+	}
+	if (vol->upd_marker) {
+		printf("damaged volume, update marker is set");
+		return -EBADF;
+	}
+	if (offp == vol->used_bytes)
+		return 0;
+
+	if (size == 0) {
+		printf("Read [%lu] bytes\n", (unsigned long) vol->used_bytes);
+		size = vol->used_bytes;
+	}
+
+	if (vol->corrupted)
+		printf("read from corrupted volume %d", vol->vol_id);
+	if (offp + size > vol->used_bytes)
+		count_save = size = vol->used_bytes - offp;
+
+	tbuf_size = vol->usable_leb_size;
+	if (size < tbuf_size)
+		tbuf_size = ALIGN(size, ubi->min_io_size);
+	tbuf = malloc(tbuf_size);
+	if (!tbuf) {
+		printf("NO MEM\n");
+		return -ENOMEM;
+	}
+	len = size > tbuf_size ? tbuf_size : size;
+
+	tmp = offp;
+	off = do_div(tmp, vol->usable_leb_size);
+	lnum = tmp;
+	do {
+		if (off + len >= vol->usable_leb_size)
+			len = vol->usable_leb_size - off;
+
+		err = ubi_eba_read_leb(ubi, vol, lnum, tbuf, off, len, 0);
+		if (err) {
+			printf("read err %x\n", err);
+			break;
+		}
+		off += len;
+		if (off == vol->usable_leb_size) {
+			lnum += 1;
+			off -= vol->usable_leb_size;
+		}
+
+		size -= len;
+		offp += len;
+
+		memcpy(buf, tbuf, len);
+
+		buf += len;
+		len = size > tbuf_size ? tbuf_size : size;
+	} while (size);
+
+	free(tbuf);
+	return err ? err : count_save - size;
+}
+
+static int ubi_dev_scan(struct mtd_info *info, char *ubidev)
+{
+	struct mtd_device *dev;
+	struct part_info *part;
+	struct mtd_partition mtd_part;
+	u8 pnum;
+	int err;
+
+	if (mtdparts_init() != 0)
+		return 1;
+
+	if (find_dev_and_part(ubidev, &dev, &pnum, &part) != 0)
+		return 1;
+
+	sprintf(buffer, "mtd=%d", pnum);
+	memset(&mtd_part, 0, sizeof(mtd_part));
+	mtd_part.name = buffer;
+	mtd_part.size = part->size;
+	mtd_part.offset = part->offset;
+	add_mtd_partitions(info, &mtd_part, 1);
+
+	err = ubi_mtd_param_parse(buffer, NULL);
+	if (err) {
+		del_mtd_partitions(info);
+		return err;
+	}
+
+	err = ubi_init();
+	if (err) {
+		del_mtd_partitions(info);
+		return err;
+	}
+
+	ubi_initialized = 1;
+
+	return 0;
+}
+
+static int do_ubi(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
+{
+	size_t size = 0;
+	ulong addr = 0;
+	int err = 0;
+
+	if (argc < 2) {
+		printf("Usage:\n%s\n", cmdtp->usage);
+		return 1;
+	}
+
+	if (strcmp(argv[1], "part") == 0) {
+		/* Print current partition */
+		if (argc == 2) {
+			if (ubi_dev.type == DEV_TYPE_NONE) {
+				printf("Error, no UBI device/partition selected!\n");
+				return 1;
+			}
+
+			printf("%s Device %d: %s, partition %s\n", ubi_dev.dev_name,
+			       ubi_dev.nr, ubi_dev.mtd_info->name, ubi_dev.part_name);
+			return 0;
+		}
+
+		if (argc < 4) {
+			printf("Usage:\n%s\n", cmdtp->usage);
+			return 1;
+		}
+
+		/* todo: get dev number for NAND... */
+		ubi_dev.nr = 0;
+
+		/*
+		 * Call ubi_exit() before re-initializing the UBI subsystem
+		 */
+		if (ubi_initialized) {
+			ubi_exit();
+			del_mtd_partitions(ubi_dev.mtd_info);
+		}
+
+		/*
+		 * Check for nand|onenand selection
+		 */
+#if defined(CONFIG_CMD_NAND)
+		if (strcmp(argv[2], "nand") == 0) {
+			strcpy(ubi_dev.dev_name, "NAND");
+			ubi_dev.type = DEV_TYPE_NAND;
+			ubi_dev.mtd_info = &nand_info[ubi_dev.nr];
+		}
+#endif
+#if defined(CONFIG_FLASH_CFI_MTD)
+		if (strcmp(argv[2], "nor") == 0) {
+			strcpy(ubi_dev.dev_name, "NOR");
+			ubi_dev.type = DEV_TYPE_NOR;
+			ubi_dev.mtd_info = get_mtd_device_nm(CFI_MTD_DEV_NAME);
+		}
+#endif
+#if defined(CONFIG_CMD_ONENAND)
+		if (strcmp(argv[2], "onenand") == 0) {
+			strcpy(ubi_dev.dev_name, "OneNAND");
+			ubi_dev.type = DEV_TYPE_ONENAND;
+			ubi_dev.mtd_info = &onenand_mtd;
+		}
+#endif
+
+		if (ubi_dev.type == DEV_TYPE_NONE) {
+			printf("Error, no UBI device/partition selected!\n");
+			return 1;
+		}
+
+		strcpy(ubi_dev.part_name, argv[3]);
+		err = ubi_dev_scan(ubi_dev.mtd_info, ubi_dev.part_name);
+		if (err) {
+			printf("UBI init error %d\n", err);
+			ubi_dev.type = DEV_TYPE_NONE;
+			return err;
+		}
+
+		ubi = ubi_devices[0];
+
+		return 0;
+	}
+
+	if ((strcmp(argv[1], "part") != 0) && (ubi_dev.type == DEV_TYPE_NONE)) {
+		printf("Error, no UBI device/partition selected!\n");
+		return 1;
+	}
+
+	if (strcmp(argv[1], "info") == 0) {
+		int layout = 0;
+		if (argc > 2 && !strncmp(argv[2], "l", 1))
+			layout = 1;
+		return ubi_info(layout);
+	}
+
+	if (strncmp(argv[1], "create", 6) == 0) {
+		int dynamic = 1;	/* default: dynamic volume */
+
+		/* Use maximum available size */
+		size = 0;
+
+		/* E.g., create volume size type */
+		if (argc == 5) {
+			if (strncmp(argv[4], "s", 1) == 0)
+				dynamic = 0;
+			else if (strncmp(argv[4], "d", 1) != 0) {
+				printf("Incorrect type\n");
+				return 1;
+			}
+			argc--;
+		}
+		/* E.g., create volume size */
+		if (argc == 4) {
+			size = simple_strtoul(argv[3], NULL, 16);
+			argc--;
+		}
+		/* Use maximum available size */
+		if (!size)
+			size = ubi->avail_pebs * ubi->leb_size;
+		/* E.g., create volume */
+		if (argc == 3)
+			return ubi_create_vol(argv[2], size, dynamic);
+	}
+
+	if (strncmp(argv[1], "remove", 6) == 0) {
+		/* E.g., remove volume */
+		if (argc == 3)
+			return ubi_remove_vol(argv[2]);
+	}
+
+	if (strncmp(argv[1], "write", 5) == 0) {
+		if (argc < 5) {
+			printf("Please see usage\n");
+			return 1;
+		}
+
+		addr = simple_strtoul(argv[2], NULL, 16);
+		size = simple_strtoul(argv[4], NULL, 16);
+
+		return ubi_volume_write(argv[3], (void *)addr, size);
+	}
+
+	if (strncmp(argv[1], "read", 4) == 0) {
+		size = 0;
+
+		/* E.g., read volume size */
+		if (argc == 5) {
+			size = simple_strtoul(argv[4], NULL, 16);
+			argc--;
+		}
+
+		/* E.g., read volume */
+		if (argc == 4) {
+			addr = simple_strtoul(argv[2], NULL, 16);
+			argc--;
+		}
+
+		if (argc == 3)
+			return ubi_volume_read(argv[3], (char *)addr, size);
+	}
+
+	printf("Please see usage\n");
+	return -1;
+}
+
+U_BOOT_CMD(ubi, 6, 1, do_ubi,
+	"ubi      - ubi commands\n",
+	"part [nand|nor|onenand] [part]"
+		" - Show or set current partition\n"
+	"ubi info [l[ayout]]"
+		" - Display volume and ubi layout information\n"
+	"ubi create[vol] volume [size] [type]"
+		" - create volume name with size\n"
+	"ubi write[vol] address volume size"
+		" - Write volume from address with size\n"
+	"ubi read[vol] address volume [size]"
+		" - Read volume to address with size\n"
+	"ubi remove[vol] volume"
+		" - Remove volume\n"
+	"[Legends]\n"
+	" volume: charater name\n"
+	" size: KiB, MiB, GiB, and bytes\n"
+	" type: s[tatic] or d[ynamic] (default=dynamic)\n"
+);
diff --git a/common/cmd_usb.c b/common/cmd_usb.c
index c62ca9769..8b19240a8 100644
--- a/common/cmd_usb.c
+++ b/common/cmd_usb.c
@@ -36,178 +36,210 @@ static int usb_stor_curr_dev = -1; /* current device */
 #endif
 
 /* some display routines (info command) */
-char * usb_get_class_desc(unsigned char dclass)
+char *usb_get_class_desc(unsigned char dclass)
 {
-	switch(dclass) {
-		case USB_CLASS_PER_INTERFACE:
-			return("See Interface");
-		case USB_CLASS_AUDIO:
-			return("Audio");
-		case USB_CLASS_COMM:
-			return("Communication");
-		case USB_CLASS_HID:
-			return("Human Interface");
-		case USB_CLASS_PRINTER:
-			return("Printer");
-		case USB_CLASS_MASS_STORAGE:
-			return("Mass Storage");
-		case USB_CLASS_HUB:
-			return("Hub");
-		case USB_CLASS_DATA:
-			return("CDC Data");
-		case USB_CLASS_VENDOR_SPEC:
-			return("Vendor specific");
-		default :
-			return("");
+	switch (dclass) {
+	case USB_CLASS_PER_INTERFACE:
+		return "See Interface";
+	case USB_CLASS_AUDIO:
+		return "Audio";
+	case USB_CLASS_COMM:
+		return "Communication";
+	case USB_CLASS_HID:
+		return "Human Interface";
+	case USB_CLASS_PRINTER:
+		return "Printer";
+	case USB_CLASS_MASS_STORAGE:
+		return "Mass Storage";
+	case USB_CLASS_HUB:
+		return "Hub";
+	case USB_CLASS_DATA:
+		return "CDC Data";
+	case USB_CLASS_VENDOR_SPEC:
+		return "Vendor specific";
+	default:
+		return "";
 	}
 }
 
-void usb_display_class_sub(unsigned char dclass,unsigned char subclass,unsigned char proto)
+void usb_display_class_sub(unsigned char dclass, unsigned char subclass,
+			   unsigned char proto)
 {
-	switch(dclass) {
-		case USB_CLASS_PER_INTERFACE:
-			printf("See Interface");
+	switch (dclass) {
+	case USB_CLASS_PER_INTERFACE:
+		printf("See Interface");
+		break;
+	case USB_CLASS_HID:
+		printf("Human Interface, Subclass: ");
+		switch (subclass) {
+		case USB_SUB_HID_NONE:
+			printf("None");
 			break;
-		case USB_CLASS_HID:
-			printf("Human Interface, Subclass: ");
-			switch(subclass) {
-				case USB_SUB_HID_NONE:
-					printf("None");
-					break;
-				case USB_SUB_HID_BOOT:
-					printf("Boot ");
-					switch(proto) {
-						case USB_PROT_HID_NONE:
-							printf("None");
-							break;
-						case USB_PROT_HID_KEYBOARD:
-							printf("Keyboard");
-							break;
-						case USB_PROT_HID_MOUSE:
-							printf("Mouse");
-							break;
-						default:
-							printf("reserved");
-					}
-					break;
-				default:
-					printf("reserved");
+		case USB_SUB_HID_BOOT:
+			printf("Boot ");
+			switch (proto) {
+			case USB_PROT_HID_NONE:
+				printf("None");
+				break;
+			case USB_PROT_HID_KEYBOARD:
+				printf("Keyboard");
+				break;
+			case USB_PROT_HID_MOUSE:
+				printf("Mouse");
+				break;
+			default:
+				printf("reserved");
+				break;
 			}
 			break;
-		case USB_CLASS_MASS_STORAGE:
-			printf("Mass Storage, ");
-			switch(subclass) {
-				case US_SC_RBC:
-					printf("RBC ");
-					break;
-				case US_SC_8020:
-					printf("SFF-8020i (ATAPI)");
-					break;
-				case US_SC_QIC:
-					printf("QIC-157 (Tape)");
-					break;
-				case US_SC_UFI:
-					printf("UFI");
-					break;
-				case US_SC_8070:
-					printf("SFF-8070");
-					break;
-				case US_SC_SCSI:
-					printf("Transp. SCSI");
-					break;
-				default:
-					printf("reserved");
-					break;
-			}
-			printf(", ");
-			switch(proto) {
-				case US_PR_CB:
-					printf("Command/Bulk");
-					break;
-				case US_PR_CBI:
-					printf("Command/Bulk/Int");
-					break;
-				case US_PR_BULK:
-					printf("Bulk only");
-					break;
-				default:
-					printf("reserved");
-			}
+		default:
+			printf("reserved");
+			break;
+		}
+		break;
+	case USB_CLASS_MASS_STORAGE:
+		printf("Mass Storage, ");
+		switch (subclass) {
+		case US_SC_RBC:
+			printf("RBC ");
+			break;
+		case US_SC_8020:
+			printf("SFF-8020i (ATAPI)");
+			break;
+		case US_SC_QIC:
+			printf("QIC-157 (Tape)");
+			break;
+		case US_SC_UFI:
+			printf("UFI");
+			break;
+		case US_SC_8070:
+			printf("SFF-8070");
+			break;
+		case US_SC_SCSI:
+			printf("Transp. SCSI");
 			break;
 		default:
-			printf("%s",usb_get_class_desc(dclass));
+			printf("reserved");
+			break;
+		}
+		printf(", ");
+		switch (proto) {
+		case US_PR_CB:
+			printf("Command/Bulk");
+			break;
+		case US_PR_CBI:
+			printf("Command/Bulk/Int");
+			break;
+		case US_PR_BULK:
+			printf("Bulk only");
+			break;
+		default:
+			printf("reserved");
+			break;
+		}
+		break;
+	default:
+		printf("%s", usb_get_class_desc(dclass));
+		break;
 	}
 }
 
-void usb_display_string(struct usb_device *dev,int index)
+void usb_display_string(struct usb_device *dev, int index)
 {
 	char buffer[256];
-	if (index!=0) {
-		if (usb_string(dev,index,&buffer[0],256)>0);
-			printf("String: \"%s\"",buffer);
+	if (index != 0) {
+		if (usb_string(dev, index, &buffer[0], 256) > 0)
+			printf("String: \"%s\"", buffer);
 	}
 }
 
 void usb_display_desc(struct usb_device *dev)
 {
-	if (dev->descriptor.bDescriptorType==USB_DT_DEVICE) {
-		printf("%d: %s,  USB Revision %x.%x\n",dev->devnum,usb_get_class_desc(dev->config.if_desc[0].bInterfaceClass),
-			(dev->descriptor.bcdUSB>>8) & 0xff,dev->descriptor.bcdUSB & 0xff);
-		if (strlen(dev->mf) || strlen(dev->prod) || strlen(dev->serial))
-			printf(" - %s %s %s\n",dev->mf,dev->prod,dev->serial);
+	if (dev->descriptor.bDescriptorType == USB_DT_DEVICE) {
+		printf("%d: %s,  USB Revision %x.%x\n", dev->devnum,
+		usb_get_class_desc(dev->config.if_desc[0].bInterfaceClass),
+				   (dev->descriptor.bcdUSB>>8) & 0xff,
+				   dev->descriptor.bcdUSB & 0xff);
+
+		if (strlen(dev->mf) || strlen(dev->prod) ||
+		    strlen(dev->serial))
+			printf(" - %s %s %s\n", dev->mf, dev->prod,
+				dev->serial);
 		if (dev->descriptor.bDeviceClass) {
 			printf(" - Class: ");
-			usb_display_class_sub(dev->descriptor.bDeviceClass,dev->descriptor.bDeviceSubClass,dev->descriptor.bDeviceProtocol);
+			usb_display_class_sub(dev->descriptor.bDeviceClass,
+					      dev->descriptor.bDeviceSubClass,
+					      dev->descriptor.bDeviceProtocol);
 			printf("\n");
+		} else {
+			printf(" - Class: (from Interface) %s\n",
+			       usb_get_class_desc(
+				dev->config.if_desc[0].bInterfaceClass));
 		}
-		else {
-			printf(" - Class: (from Interface) %s\n",usb_get_class_desc(dev->config.if_desc[0].bInterfaceClass));
-		}
-		printf(" - PacketSize: %d  Configurations: %d\n",dev->descriptor.bMaxPacketSize0,dev->descriptor.bNumConfigurations);
-		printf(" - Vendor: 0x%04x  Product 0x%04x Version %d.%d\n",dev->descriptor.idVendor,dev->descriptor.idProduct,(dev->descriptor.bcdDevice>>8) & 0xff,dev->descriptor.bcdDevice & 0xff);
+		printf(" - PacketSize: %d  Configurations: %d\n",
+			dev->descriptor.bMaxPacketSize0,
+			dev->descriptor.bNumConfigurations);
+		printf(" - Vendor: 0x%04x  Product 0x%04x Version %d.%d\n",
+			dev->descriptor.idVendor, dev->descriptor.idProduct,
+			(dev->descriptor.bcdDevice>>8) & 0xff,
+			dev->descriptor.bcdDevice & 0xff);
 	}
 
 }
 
-void usb_display_conf_desc(struct usb_config_descriptor *config,struct usb_device *dev)
+void usb_display_conf_desc(struct usb_config_descriptor *config,
+			   struct usb_device *dev)
 {
-	printf("   Configuration: %d\n",config->bConfigurationValue);
-	printf("   - Interfaces: %d %s%s%dmA\n",config->bNumInterfaces,(config->bmAttributes & 0x40) ? "Self Powered " : "Bus Powered ",
-	(config->bmAttributes & 0x20) ? "Remote Wakeup " : "",config->MaxPower*2);
+	printf("   Configuration: %d\n", config->bConfigurationValue);
+	printf("   - Interfaces: %d %s%s%dmA\n", config->bNumInterfaces,
+	       (config->bmAttributes & 0x40) ? "Self Powered " : "Bus Powered ",
+	       (config->bmAttributes & 0x20) ? "Remote Wakeup " : "",
+		config->MaxPower*2);
 	if (config->iConfiguration) {
 		printf("   - ");
-		usb_display_string(dev,config->iConfiguration);
+		usb_display_string(dev, config->iConfiguration);
 		printf("\n");
 	}
 }
 
-void usb_display_if_desc(struct usb_interface_descriptor *ifdesc,struct usb_device *dev)
+void usb_display_if_desc(struct usb_interface_descriptor *ifdesc,
+			 struct usb_device *dev)
 {
-	printf("     Interface: %d\n",ifdesc->bInterfaceNumber);
-	printf("     - Alternate Setting %d, Endpoints: %d\n",ifdesc->bAlternateSetting,ifdesc->bNumEndpoints);
+	printf("     Interface: %d\n", ifdesc->bInterfaceNumber);
+	printf("     - Alternate Setting %d, Endpoints: %d\n",
+		ifdesc->bAlternateSetting, ifdesc->bNumEndpoints);
 	printf("     - Class ");
-	usb_display_class_sub(ifdesc->bInterfaceClass,ifdesc->bInterfaceSubClass,ifdesc->bInterfaceProtocol);
+	usb_display_class_sub(ifdesc->bInterfaceClass,
+		ifdesc->bInterfaceSubClass, ifdesc->bInterfaceProtocol);
 	printf("\n");
 	if (ifdesc->iInterface) {
 		printf("     - ");
-		usb_display_string(dev,ifdesc->iInterface);
+		usb_display_string(dev, ifdesc->iInterface);
 		printf("\n");
 	}
 }
 
 void usb_display_ep_desc(struct usb_endpoint_descriptor *epdesc)
 {
-	printf("     - Endpoint %d %s ",epdesc->bEndpointAddress & 0xf,(epdesc->bEndpointAddress & 0x80) ? "In" : "Out");
-	switch((epdesc->bmAttributes & 0x03))
-	{
-		case 0: printf("Control"); break;
-		case 1: printf("Isochronous"); break;
-		case 2: printf("Bulk"); break;
-		case 3: printf("Interrupt"); break;
+	printf("     - Endpoint %d %s ", epdesc->bEndpointAddress & 0xf,
+		(epdesc->bEndpointAddress & 0x80) ? "In" : "Out");
+	switch ((epdesc->bmAttributes & 0x03)) {
+	case 0:
+		printf("Control");
+		break;
+	case 1:
+		printf("Isochronous");
+		break;
+	case 2:
+		printf("Bulk");
+		break;
+	case 3:
+		printf("Interrupt");
+		break;
 	}
-	printf(" MaxPacket %d",epdesc->wMaxPacketSize);
-	if ((epdesc->bmAttributes & 0x03)==0x3)
-		printf(" Interval %dms",epdesc->bInterval);
+	printf(" MaxPacket %d", epdesc->wMaxPacketSize);
+	if ((epdesc->bmAttributes & 0x03) == 0x3)
+		printf(" Interval %dms", epdesc->bInterval);
 	printf("\n");
 }
 
@@ -217,15 +249,15 @@ void usb_display_config(struct usb_device *dev)
 	struct usb_config_descriptor *config;
 	struct usb_interface_descriptor *ifdesc;
 	struct usb_endpoint_descriptor *epdesc;
-	int i,ii;
-
-	config= &dev->config;
-	usb_display_conf_desc(config,dev);
-	for(i=0;i<config->no_of_if;i++) {
-		ifdesc= &config->if_desc[i];
-		usb_display_if_desc(ifdesc,dev);
-		for(ii=0;ii<ifdesc->no_of_ep;ii++) {
-			epdesc= &ifdesc->ep_desc[ii];
+	int i, ii;
+
+	config = &dev->config;
+	usb_display_conf_desc(config, dev);
+	for (i = 0; i < config->no_of_if; i++) {
+		ifdesc = &config->if_desc[i];
+		usb_display_if_desc(ifdesc, dev);
+		for (ii = 0; ii < ifdesc->no_of_ep; ii++) {
+			epdesc = &ifdesc->ep_desc[ii];
 			usb_display_ep_desc(epdesc);
 		}
 	}
@@ -233,31 +265,33 @@ void usb_display_config(struct usb_device *dev)
 }
 
 /* shows the device tree recursively */
-void usb_show_tree_graph(struct usb_device *dev,char *pre)
+void usb_show_tree_graph(struct usb_device *dev, char *pre)
 {
-	int i,index;
-	int has_child,last_child,port;
+	int i, index;
+	int has_child, last_child, port;
 
-	index=strlen(pre);
-	printf(" %s",pre);
+	index = strlen(pre);
+	printf(" %s", pre);
 	/* check if the device has connected children */
-	has_child=0;
-	for(i=0;i<dev->maxchild;i++) {
-		if (dev->children[i]!=NULL)
-			has_child=1;
+	has_child = 0;
+	for (i = 0; i < dev->maxchild; i++) {
+		if (dev->children[i] != NULL)
+			has_child = 1;
 	}
 	/* check if we are the last one */
-	last_child=1;
-	if (dev->parent!=NULL) {
-		for(i=0;i<dev->parent->maxchild;i++) {
+	last_child = 1;
+	if (dev->parent != NULL) {
+		for (i = 0; i < dev->parent->maxchild; i++) {
 			/* search for children */
-			if (dev->parent->children[i]==dev) {
-				/* found our pointer, see if we have a little sister */
-				port=i;
-				while(i++<dev->parent->maxchild) {
-					if (dev->parent->children[i]!=NULL) {
+			if (dev->parent->children[i] == dev) {
+				/* found our pointer, see if we have a
+				 * little sister
+				 */
+				port = i;
+				while (i++ < dev->parent->maxchild) {
+					if (dev->parent->children[i] != NULL) {
 						/* found a sister */
-						last_child=0;
+						last_child = 0;
 						break;
 					} /* if */
 				} /* while */
@@ -265,28 +299,27 @@ void usb_show_tree_graph(struct usb_device *dev,char *pre)
 		} /* for all children of the parent */
 		printf("\b+-");
 		/* correct last child */
-		if (last_child) {
-			pre[index-1]=' ';
-		}
+		if (last_child)
+			pre[index-1] = ' ';
 	} /* if not root hub */
 	else
 		printf(" ");
-	printf("%d ",dev->devnum);
-	pre[index++]=' ';
-	pre[index++]= has_child ? '|' : ' ';
-	pre[index]=0;
-	printf(" %s (%s, %dmA)\n",usb_get_class_desc(dev->config.if_desc[0].bInterfaceClass),
-		dev->slow ? "1.5MBit/s" : "12MBit/s",dev->config.MaxPower * 2);
-	if (strlen(dev->mf) ||
-	   strlen(dev->prod) ||
-	   strlen(dev->serial))
-		printf(" %s  %s %s %s\n",pre,dev->mf,dev->prod,dev->serial);
-	printf(" %s\n",pre);
-	if (dev->maxchild>0) {
-		for(i=0;i<dev->maxchild;i++) {
-			if (dev->children[i]!=NULL) {
-				usb_show_tree_graph(dev->children[i],pre);
-				pre[index]=0;
+	printf("%d ", dev->devnum);
+	pre[index++] = ' ';
+	pre[index++] = has_child ? '|' : ' ';
+	pre[index] = 0;
+	printf(" %s (%s, %dmA)\n", usb_get_class_desc(
+					dev->config.if_desc[0].bInterfaceClass),
+					dev->slow ? "1.5MBit/s" : "12MBit/s",
+					dev->config.MaxPower * 2);
+	if (strlen(dev->mf) || strlen(dev->prod) || strlen(dev->serial))
+		printf(" %s  %s %s %s\n", pre, dev->mf, dev->prod, dev->serial);
+	printf(" %s\n", pre);
+	if (dev->maxchild > 0) {
+		for (i = 0; i < dev->maxchild; i++) {
+			if (dev->children[i] != NULL) {
+				usb_show_tree_graph(dev->children[i], pre);
+				pre[index] = 0;
 			}
 		}
 	}
@@ -297,8 +330,8 @@ void usb_show_tree(struct usb_device *dev)
 {
 	char preamble[32];
 
-	memset(preamble,0,32);
-	usb_show_tree_graph(dev,&preamble[0]);
+	memset(preamble, 0, 32);
+	usb_show_tree_graph(dev, &preamble[0]);
 }
 
 
@@ -306,11 +339,11 @@ void usb_show_tree(struct usb_device *dev)
  * usb boot command intepreter. Derived from diskboot
  */
 #ifdef CONFIG_USB_STORAGE
-int do_usbboot (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+int do_usbboot(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 {
 	char *boot_device = NULL;
 	char *ep;
-	int dev, part=1, rcode;
+	int dev, part = 1, rcode;
 	ulong addr, cnt;
 	disk_partition_t info;
 	image_header_t *hdr;
@@ -321,96 +354,99 @@ int do_usbboot (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 
 	switch (argc) {
 	case 1:
-		addr = CFG_LOAD_ADDR;
-		boot_device = getenv ("bootdevice");
+		addr = CONFIG_SYS_LOAD_ADDR;
+		boot_device = getenv("bootdevice");
 		break;
 	case 2:
 		addr = simple_strtoul(argv[1], NULL, 16);
-		boot_device = getenv ("bootdevice");
+		boot_device = getenv("bootdevice");
 		break;
 	case 3:
 		addr = simple_strtoul(argv[1], NULL, 16);
 		boot_device = argv[2];
 		break;
 	default:
-		printf ("Usage:\n%s\n", cmdtp->usage);
+		printf("Usage:\n%s\n", cmdtp->usage);
 		return 1;
 	}
 
 	if (!boot_device) {
-		puts ("\n** No boot device **\n");
+		puts("\n** No boot device **\n");
 		return 1;
 	}
 
 	dev = simple_strtoul(boot_device, &ep, 16);
-	stor_dev=usb_stor_get_dev(dev);
+	stor_dev = usb_stor_get_dev(dev);
 	if (stor_dev->type == DEV_TYPE_UNKNOWN) {
-		printf ("\n** Device %d not available\n", dev);
+		printf("\n** Device %d not available\n", dev);
 		return 1;
 	}
-	if (stor_dev->block_read==NULL) {
+	if (stor_dev->block_read == NULL) {
 		printf("storage device not initialized. Use usb scan\n");
 		return 1;
 	}
 	if (*ep) {
 		if (*ep != ':') {
-			puts ("\n** Invalid boot device, use `dev[:part]' **\n");
+			puts("\n** Invalid boot device, use `dev[:part]' **\n");
 			return 1;
 		}
 		part = simple_strtoul(++ep, NULL, 16);
 	}
 
-	if (get_partition_info (stor_dev, part, &info)) {
+	if (get_partition_info(stor_dev, part, &info)) {
 		/* try to boot raw .... */
-		strncpy((char *)&info.type[0], BOOT_PART_TYPE, sizeof(BOOT_PART_TYPE));
+		strncpy((char *)&info.type[0], BOOT_PART_TYPE,
+			sizeof(BOOT_PART_TYPE));
 		strncpy((char *)&info.name[0], "Raw", 4);
-		info.start=0;
-		info.blksz=0x200;
-		info.size=2880;
+		info.start = 0;
+		info.blksz = 0x200;
+		info.size = 2880;
 		printf("error reading partinfo...try to boot raw\n");
 	}
-	if ((strncmp((char *)info.type, BOOT_PART_TYPE, sizeof(info.type)) != 0) &&
-	    (strncmp((char *)info.type, BOOT_PART_COMP, sizeof(info.type)) != 0)) {
-		printf ("\n** Invalid partition type \"%.32s\""
+	if ((strncmp((char *)info.type, BOOT_PART_TYPE,
+	    sizeof(info.type)) != 0) &&
+	    (strncmp((char *)info.type, BOOT_PART_COMP,
+	    sizeof(info.type)) != 0)) {
+		printf("\n** Invalid partition type \"%.32s\""
 			" (expect \"" BOOT_PART_TYPE "\")\n",
 			info.type);
 		return 1;
 	}
-	printf ("\nLoading from USB device %d, partition %d: "
+	printf("\nLoading from USB device %d, partition %d: "
 		"Name: %.32s  Type: %.32s\n",
 		dev, part, info.name, info.type);
 
-	debug ("First Block: %ld,  # of blocks: %ld, Block Size: %ld\n",
+	debug("First Block: %ld,  # of blocks: %ld, Block Size: %ld\n",
 		info.start, info.size, info.blksz);
 
 	if (stor_dev->block_read(dev, info.start, 1, (ulong *)addr) != 1) {
-		printf ("** Read error on %d:%d\n", dev, part);
+		printf("** Read error on %d:%d\n", dev, part);
 		return 1;
 	}
 
-	switch (genimg_get_format ((void *)addr)) {
+	switch (genimg_get_format((void *)addr)) {
 	case IMAGE_FORMAT_LEGACY:
 		hdr = (image_header_t *)addr;
 
-		if (!image_check_hcrc (hdr)) {
-			puts ("\n** Bad Header Checksum **\n");
+		if (!image_check_hcrc(hdr)) {
+			puts("\n** Bad Header Checksum **\n");
 			return 1;
 		}
 
-		image_print_contents (hdr);
+		image_print_contents(hdr);
 
-		cnt = image_get_image_size (hdr);
+		cnt = image_get_image_size(hdr);
 		break;
 #if defined(CONFIG_FIT)
 	case IMAGE_FORMAT_FIT:
 		fit_hdr = (const void *)addr;
-		puts ("Fit image detected...\n");
+		puts("Fit image detected...\n");
 
-		cnt = fit_get_size (fit_hdr);
+		cnt = fit_get_size(fit_hdr);
 		break;
 #endif
 	default:
-		puts ("** Unknown image type\n");
+		puts("** Unknown image type\n");
 		return 1;
 	}
 
@@ -418,36 +454,38 @@ int do_usbboot (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 	cnt /= info.blksz;
 	cnt -= 1;
 
-	if (stor_dev->block_read (dev, info.start+1, cnt,
+	if (stor_dev->block_read(dev, info.start+1, cnt,
 		      (ulong *)(addr+info.blksz)) != cnt) {
-		printf ("\n** Read error on %d:%d\n", dev, part);
+		printf("\n** Read error on %d:%d\n", dev, part);
 		return 1;
 	}
 
 #if defined(CONFIG_FIT)
-	/* This cannot be done earlier, we need complete FIT image in RAM first */
-	if (genimg_get_format ((void *)addr) == IMAGE_FORMAT_FIT) {
-		if (!fit_check_format (fit_hdr)) {
-			puts ("** Bad FIT image format\n");
+	/* This cannot be done earlier, we need complete FIT image in RAM
+	 * first
+	 */
+	if (genimg_get_format((void *)addr) == IMAGE_FORMAT_FIT) {
+		if (!fit_check_format(fit_hdr)) {
+			puts("** Bad FIT image format\n");
 			return 1;
 		}
-		fit_print_contents (fit_hdr);
+		fit_print_contents(fit_hdr);
 	}
 #endif
 
 	/* Loading ok, update default load address */
 	load_addr = addr;
 
-	flush_cache (addr, (cnt+1)*info.blksz);
+	flush_cache(addr, (cnt+1)*info.blksz);
 
 	/* Check if we should attempt an auto-start */
-	if (((ep = getenv("autostart")) != NULL) && (strcmp(ep,"yes") == 0)) {
+	if (((ep = getenv("autostart")) != NULL) && (strcmp(ep, "yes") == 0)) {
 		char *local_args[2];
-		extern int do_bootm (cmd_tbl_t *, int, int, char *[]);
+		extern int do_bootm(cmd_tbl_t *, int, int, char *[]);
 		local_args[0] = argv[0];
 		local_args[1] = NULL;
-		printf ("Automatic boot of image at addr 0x%08lX ...\n", addr);
-		rcode=do_bootm (cmdtp, 0, 1, local_args);
+		printf("Automatic boot of image at addr 0x%08lX ...\n", addr);
+		rcode = do_bootm(cmdtp, 0, 1, local_args);
 		return rcode;
 	}
 	return 0;
@@ -455,10 +493,10 @@ int do_usbboot (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 #endif /* CONFIG_USB_STORAGE */
 
 
-/*********************************************************************************
+/******************************************************************************
  * usb command intepreter
  */
-int do_usb (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+int do_usb(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 {
 
 	int i;
@@ -469,7 +507,7 @@ int do_usb (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 #endif
 
 	if ((strncmp(argv[1], "reset", 5) == 0) ||
-		 (strncmp(argv[1], "start", 5) == 0)){
+		 (strncmp(argv[1], "start", 5) == 0)) {
 		usb_stop();
 		printf("(Re)start USB...\n");
 		i = usb_init();
@@ -480,16 +518,17 @@ int do_usb (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 #endif
 		return 0;
 	}
-	if (strncmp(argv[1],"stop",4) == 0) {
+	if (strncmp(argv[1], "stop", 4) == 0) {
 #ifdef CONFIG_USB_KEYBOARD
-		if (argc==2) {
-			if (usb_kbd_deregister()!=0) {
-				printf("USB not stopped: usbkbd still using USB\n");
+		if (argc == 2) {
+			if (usb_kbd_deregister() != 0) {
+				printf("USB not stopped: usbkbd still"
+					" using USB\n");
 				return 1;
 			}
-		}
-		else { /* forced stop, switch console in to serial */
-			console_assign(stdin,"serial");
+		} else {
+			/* forced stop, switch console in to serial */
+			console_assign(stdin, "serial");
 			usb_kbd_deregister();
 		}
 #endif
@@ -501,40 +540,38 @@ int do_usb (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 		printf("USB is stopped. Please issue 'usb start' first.\n");
 		return 1;
 	}
-	if (strncmp(argv[1],"tree",4) == 0) {
+	if (strncmp(argv[1], "tree", 4) == 0) {
 		printf("\nDevice Tree:\n");
 		usb_show_tree(usb_get_dev_index(0));
 		return 0;
 	}
-	if (strncmp(argv[1],"inf",3) == 0) {
+	if (strncmp(argv[1], "inf", 3) == 0) {
 		int d;
-		if (argc==2) {
-			for(d=0;d<USB_MAX_DEVICE;d++) {
-				dev=usb_get_dev_index(d);
-				if (dev==NULL)
+		if (argc == 2) {
+			for (d = 0; d < USB_MAX_DEVICE; d++) {
+				dev = usb_get_dev_index(d);
+				if (dev == NULL)
 					break;
 				usb_display_desc(dev);
 				usb_display_config(dev);
 			}
 			return 0;
-		}
-		else {
+		} else {
 			int d;
 
-			i=simple_strtoul(argv[2], NULL, 16);
-			printf("config for device %d\n",i);
-			for(d=0;d<USB_MAX_DEVICE;d++) {
-				dev=usb_get_dev_index(d);
-				if (dev==NULL)
+			i = simple_strtoul(argv[2], NULL, 16);
+			printf("config for device %d\n", i);
+			for (d = 0; d < USB_MAX_DEVICE; d++) {
+				dev = usb_get_dev_index(d);
+				if (dev == NULL)
 					break;
-				if (dev->devnum==i)
+				if (dev->devnum == i)
 					break;
 			}
-			if (dev==NULL) {
+			if (dev == NULL) {
 				printf("*** NO Device avaiable ***\n");
 				return 0;
-			}
-			else {
+			} else {
 				usb_display_desc(dev);
 				usb_display_config(dev);
 			}
@@ -542,37 +579,28 @@ int do_usb (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 		return 0;
 	}
 #ifdef CONFIG_USB_STORAGE
-	if (strncmp(argv[1], "scan", 4) == 0) {
-		printf("  NOTE: this command is obsolete and will be phased out\n");
-		printf("  please use 'usb storage' for USB storage devices information\n\n");
-		usb_stor_info();
-		return 0;
-	}
-
-	if (strncmp(argv[1], "stor", 4) == 0) {
+	if (strncmp(argv[1], "stor", 4) == 0)
 		return usb_stor_info();
-	}
 
-	if (strncmp(argv[1],"part",4) == 0) {
+	if (strncmp(argv[1], "part", 4) == 0) {
 		int devno, ok = 0;
-		if (argc==2) {
-			for (devno=0; devno<USB_MAX_STOR_DEV; ++devno) {
-				stor_dev=usb_stor_get_dev(devno);
-				if (stor_dev->type!=DEV_TYPE_UNKNOWN) {
+		if (argc == 2) {
+			for (devno = 0; devno < USB_MAX_STOR_DEV; ++devno) {
+				stor_dev = usb_stor_get_dev(devno);
+				if (stor_dev->type != DEV_TYPE_UNKNOWN) {
 					ok++;
 					if (devno)
 						printf("\n");
-					printf("print_part of %x\n",devno);
+					printf("print_part of %x\n", devno);
 					print_part(stor_dev);
 				}
 			}
-		}
-		else {
-			devno=simple_strtoul(argv[2], NULL, 16);
-			stor_dev=usb_stor_get_dev(devno);
-			if (stor_dev->type!=DEV_TYPE_UNKNOWN) {
+		} else {
+			devno = simple_strtoul(argv[2], NULL, 16);
+			stor_dev = usb_stor_get_dev(devno);
+			if (stor_dev->type != DEV_TYPE_UNKNOWN) {
 				ok++;
-				printf("print_part of %x\n",devno);
+				printf("print_part of %x\n", devno);
 				print_part(stor_dev);
 			}
 		}
@@ -582,22 +610,24 @@ int do_usb (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 		}
 		return 0;
 	}
-	if (strcmp(argv[1],"read") == 0) {
-		if (usb_stor_curr_dev<0) {
+	if (strcmp(argv[1], "read") == 0) {
+		if (usb_stor_curr_dev < 0) {
 			printf("no current device selected\n");
 			return 1;
 		}
-		if (argc==5) {
+		if (argc == 5) {
 			unsigned long addr = simple_strtoul(argv[2], NULL, 16);
 			unsigned long blk  = simple_strtoul(argv[3], NULL, 16);
 			unsigned long cnt  = simple_strtoul(argv[4], NULL, 16);
 			unsigned long n;
-			printf ("\nUSB read: device %d block # %ld, count %ld ... ",
-					usb_stor_curr_dev, blk, cnt);
-			stor_dev=usb_stor_get_dev(usb_stor_curr_dev);
-			n = stor_dev->block_read(usb_stor_curr_dev, blk, cnt, (ulong *)addr);
-			printf ("%ld blocks read: %s\n",n,(n==cnt) ? "OK" : "ERROR");
-			if (n==cnt)
+			printf("\nUSB read: device %d block # %ld, count %ld"
+				" ... ", usb_stor_curr_dev, blk, cnt);
+			stor_dev = usb_stor_get_dev(usb_stor_curr_dev);
+			n = stor_dev->block_read(usb_stor_curr_dev, blk, cnt,
+						 (ulong *)addr);
+			printf("%ld blocks read: %s\n", n,
+				(n == cnt) ? "OK" : "ERROR");
+			if (n == cnt)
 				return 0;
 			return 1;
 		}
@@ -605,34 +635,31 @@ int do_usb (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 	if (strncmp(argv[1], "dev", 3) == 0) {
 		if (argc == 3) {
 			int dev = (int)simple_strtoul(argv[2], NULL, 10);
-			printf ("\nUSB device %d: ", dev);
+			printf("\nUSB device %d: ", dev);
 			if (dev >= USB_MAX_STOR_DEV) {
 				printf("unknown device\n");
 				return 1;
 			}
-			printf ("\n    Device %d: ", dev);
-			stor_dev=usb_stor_get_dev(dev);
+			printf("\n    Device %d: ", dev);
+			stor_dev = usb_stor_get_dev(dev);
 			dev_print(stor_dev);
-			if (stor_dev->type == DEV_TYPE_UNKNOWN) {
+			if (stor_dev->type == DEV_TYPE_UNKNOWN)
 				return 1;
-			}
 			usb_stor_curr_dev = dev;
 			printf("... is now current device\n");
 			return 0;
-		}
-		else {
-			printf ("\nUSB device %d: ", usb_stor_curr_dev);
-			stor_dev=usb_stor_get_dev(usb_stor_curr_dev);
+		} else {
+			printf("\nUSB device %d: ", usb_stor_curr_dev);
+			stor_dev = usb_stor_get_dev(usb_stor_curr_dev);
 			dev_print(stor_dev);
-			if (stor_dev->type == DEV_TYPE_UNKNOWN) {
+			if (stor_dev->type == DEV_TYPE_UNKNOWN)
 				return 1;
-			}
 			return 0;
 		}
 		return 0;
 	}
 #endif /* CONFIG_USB_STORAGE */
-	printf ("Usage:\n%s\n", cmdtp->usage);
+	printf("Usage:\n%s\n", cmdtp->usage);
 	return 1;
 }
 
@@ -646,7 +673,8 @@ U_BOOT_CMD(
 	"usb info [dev] - show available USB devices\n"
 	"usb storage  - show details of USB storage devices\n"
 	"usb dev [dev] - show or set current USB storage device\n"
-	"usb part [dev] - print partition table of one or all USB storage devices\n"
+	"usb part [dev] - print partition table of one or all USB storage"
+	" devices\n"
 	"usb read addr blk# cnt - read `cnt' blocks starting at block `blk#'\n"
 	"    to memory address `addr'\n"
 );
diff --git a/common/cmd_vfd.c b/common/cmd_vfd.c
index 104c31056..45f427126 100644
--- a/common/cmd_vfd.c
+++ b/common/cmd_vfd.c
@@ -75,7 +75,6 @@ U_BOOT_CMD(
 );
 #endif
 
-#ifdef CONFIG_VFD
 int trab_vfd (ulong bitmap)
 {
 	uchar *addr;
@@ -103,4 +102,3 @@ int trab_vfd (ulong bitmap)
 	transfer_pic(3, addr, VFD_LOGO_HEIGHT, VFD_LOGO_WIDTH);
 	return 0;
 }
-#endif	/* CONFIG_VFD */
diff --git a/common/command.c b/common/command.c
index 861796d9a..a4a978c5f 100644
--- a/common/command.c
+++ b/common/command.c
@@ -70,7 +70,7 @@ do_echo (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 }
 
 U_BOOT_CMD(
-	echo,	CFG_MAXARGS,	1,	do_echo,
+	echo,	CONFIG_SYS_MAXARGS,	1,	do_echo,
 	"echo    - echo args to console\n",
 	"[args..]\n"
 	"    - echo args to console; \\c suppresses newline\n"
@@ -78,7 +78,7 @@ U_BOOT_CMD(
 
 #endif
 
-#ifdef CFG_HUSH_PARSER
+#ifdef CONFIG_SYS_HUSH_PARSER
 
 int
 do_test (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
@@ -202,7 +202,7 @@ do_test (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 }
 
 U_BOOT_CMD(
-	test,	CFG_MAXARGS,	1,	do_test,
+	test,	CONFIG_SYS_MAXARGS,	1,	do_test,
 	"test    - minimal test like /bin/sh\n",
 	"[args..]\n"
 	"    - test functionality\n"
@@ -286,7 +286,7 @@ int do_help (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
 	 */
 	for (i = 1; i < argc; ++i) {
 		if ((cmdtp = find_cmd (argv[i])) != NULL) {
-#ifdef	CFG_LONGHELP
+#ifdef	CONFIG_SYS_LONGHELP
 			/* found - print (long) help info */
 			puts (cmdtp->name);
 			putc (' ');
@@ -300,7 +300,7 @@ int do_help (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
 #else	/* no long help available */
 			if (cmdtp->usage)
 				puts (cmdtp->usage);
-#endif	/* CFG_LONGHELP */
+#endif	/* CONFIG_SYS_LONGHELP */
 		} else {
 			printf ("Unknown command '%s' - try 'help'"
 				" without arguments for list of all"
@@ -314,7 +314,7 @@ int do_help (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
 
 
 U_BOOT_CMD(
-	help,	CFG_MAXARGS,	1,	do_help,
+	help,	CONFIG_SYS_MAXARGS,	1,	do_help,
 	"help    - print online help\n",
 	"[command ...]\n"
 	"    - show help information (for 'command')\n"
@@ -325,26 +325,26 @@ U_BOOT_CMD(
 );
 
 /* This do not ust the U_BOOT_CMD macro as ? can't be used in symbol names */
-#ifdef  CFG_LONGHELP
+#ifdef  CONFIG_SYS_LONGHELP
 cmd_tbl_t __u_boot_cmd_question_mark Struct_Section = {
-	"?",	CFG_MAXARGS,	1,	do_help,
+	"?",	CONFIG_SYS_MAXARGS,	1,	do_help,
 	"?       - alias for 'help'\n",
 	NULL
 };
 #else
 cmd_tbl_t __u_boot_cmd_question_mark Struct_Section = {
-	"?",	CFG_MAXARGS,	1,	do_help,
+	"?",	CONFIG_SYS_MAXARGS,	1,	do_help,
 	"?       - alias for 'help'\n"
 };
-#endif /* CFG_LONGHELP */
+#endif /* CONFIG_SYS_LONGHELP */
 
 /***************************************************************************
  * find command table entry for a command
  */
-cmd_tbl_t *find_cmd (const char *cmd)
+cmd_tbl_t *find_cmd_tbl (const char *cmd, cmd_tbl_t *table, int table_len)
 {
 	cmd_tbl_t *cmdtp;
-	cmd_tbl_t *cmdtp_temp = &__u_boot_cmd_start;	/*Init value */
+	cmd_tbl_t *cmdtp_temp = table;	/*Init value */
 	const char *p;
 	int len;
 	int n_found = 0;
@@ -355,8 +355,8 @@ cmd_tbl_t *find_cmd (const char *cmd)
 	 */
 	len = ((p = strchr(cmd, '.')) == NULL) ? strlen (cmd) : (p - cmd);
 
-	for (cmdtp = &__u_boot_cmd_start;
-	     cmdtp != &__u_boot_cmd_end;
+	for (cmdtp = table;
+	     cmdtp != table + table_len;
 	     cmdtp++) {
 		if (strncmp (cmd, cmdtp->name, len) == 0) {
 			if (len == strlen (cmdtp->name))
@@ -373,6 +373,12 @@ cmd_tbl_t *find_cmd (const char *cmd)
 	return NULL;	/* not found or ambiguous command */
 }
 
+cmd_tbl_t *find_cmd (const char *cmd)
+{
+	int len = &__u_boot_cmd_end - &__u_boot_cmd_start;
+	return find_cmd_tbl(cmd, &__u_boot_cmd_start, len);
+}
+
 #ifdef CONFIG_AUTO_COMPLETE
 
 int var_complete(int argc, char *argv[], char last_char, int maxv, char *cmdv[])
@@ -564,12 +570,12 @@ static int find_common_prefix(char *argv[])
 	return len;
 }
 
-static char tmp_buf[CFG_CBSIZE];	/* copy of console I/O buffer	*/
+static char tmp_buf[CONFIG_SYS_CBSIZE];	/* copy of console I/O buffer	*/
 
 int cmd_auto_complete(const char *const prompt, char *buf, int *np, int *colp)
 {
 	int n = *np, col = *colp;
-	char *argv[CFG_MAXARGS + 1];		/* NULL terminated	*/
+	char *argv[CONFIG_SYS_MAXARGS + 1];		/* NULL terminated	*/
 	char *cmdv[20];
 	char *s, *t;
 	const char *sep;
@@ -577,7 +583,7 @@ int cmd_auto_complete(const char *const prompt, char *buf, int *np, int *colp)
 	int cnt;
 	char last_char;
 
-	if (strcmp(prompt, CFG_PROMPT) != 0)
+	if (strcmp(prompt, CONFIG_SYS_PROMPT) != 0)
 		return 0;	/* not in normal console */
 
 	cnt = strlen(buf);
@@ -625,7 +631,7 @@ int cmd_auto_complete(const char *const prompt, char *buf, int *np, int *colp)
 	if (s != NULL) {
 		k = len + seplen;
 		/* make sure it fits */
-		if (n + k >= CFG_CBSIZE - 2) {
+		if (n + k >= CONFIG_SYS_CBSIZE - 2) {
 			putc('\a');
 			return 1;
 		}
@@ -654,3 +660,27 @@ int cmd_auto_complete(const char *const prompt, char *buf, int *np, int *colp)
 }
 
 #endif
+
+#ifdef CMD_DATA_SIZE
+int cmd_get_data_size(char* arg, int default_size)
+{
+	/* Check for a size specification .b, .w or .l.
+	 */
+	int len = strlen(arg);
+	if (len > 2 && arg[len-2] == '.') {
+		switch(arg[len-1]) {
+		case 'b':
+			return 1;
+		case 'w':
+			return 2;
+		case 'l':
+			return 4;
+		case 's':
+			return -2;
+		default:
+			return -1;
+		}
+	}
+	return default_size;
+}
+#endif
diff --git a/common/console.c b/common/console.c
index cfcaeb86c..89aeab69e 100644
--- a/common/console.c
+++ b/common/console.c
@@ -33,20 +33,20 @@ DECLARE_GLOBAL_DATA_PTR;
 int console_changed = 0;
 #endif
 
-#ifdef CFG_CONSOLE_IS_IN_ENV
+#ifdef CONFIG_SYS_CONSOLE_IS_IN_ENV
 /*
  * if overwrite_console returns 1, the stdin, stderr and stdout
  * are switched to the serial port, else the settings in the
  * environment are used
  */
-#ifdef CFG_CONSOLE_OVERWRITE_ROUTINE
+#ifdef CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
 extern int overwrite_console (void);
 #define OVERWRITE_CONSOLE overwrite_console ()
 #else
 #define OVERWRITE_CONSOLE 0
-#endif /* CFG_CONSOLE_OVERWRITE_ROUTINE */
+#endif /* CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE */
 
-#endif /* CFG_CONSOLE_IS_IN_ENV */
+#endif /* CONFIG_SYS_CONSOLE_IS_IN_ENV */
 
 static int console_setfile (int file, device_t * dev)
 {
@@ -93,13 +93,83 @@ static int console_setfile (int file, device_t * dev)
 	return error;
 }
 
+#if defined(CONFIG_CONSOLE_MUX)
+/** Console I/O multiplexing *******************************************/
+
+static device_t *tstcdev;
+device_t **console_devices[MAX_FILES];
+int cd_count[MAX_FILES];
+
+/*
+ * This depends on tstc() always being called before getc().
+ * This is guaranteed to be true because this routine is called
+ * only from fgetc() which assures it.
+ * No attempt is made to demultiplex multiple input sources.
+ */
+static int iomux_getc(void)
+{
+	unsigned char ret;
+
+	/* This is never called with testcdev == NULL */
+	ret = tstcdev->getc();
+	tstcdev = NULL;
+	return ret;
+}
+
+static int iomux_tstc(int file)
+{
+	int i, ret;
+	device_t *dev;
+
+	disable_ctrlc(1);
+	for (i = 0; i < cd_count[file]; i++) {
+		dev = console_devices[file][i];
+		if (dev->tstc != NULL) {
+			ret = dev->tstc();
+			if (ret > 0) {
+				tstcdev = dev;
+				disable_ctrlc(0);
+				return ret;
+			}
+		}
+	}
+	disable_ctrlc(0);
+
+	return 0;
+}
+
+static void iomux_putc(int file, const char c)
+{
+	int i;
+	device_t *dev;
+
+	for (i = 0; i < cd_count[file]; i++) {
+		dev = console_devices[file][i];
+		if (dev->putc != NULL)
+			dev->putc(c);
+	}
+}
+
+static void iomux_puts(int file, const char *s)
+{
+	int i;
+	device_t *dev;
+
+	for (i = 0; i < cd_count[file]; i++) {
+		dev = console_devices[file][i];
+		if (dev->puts != NULL)
+			dev->puts(s);
+	}
+}
+#endif /* defined(CONFIG_CONSOLE_MUX) */
+
 /** U-Boot INITIAL CONSOLE-NOT COMPATIBLE FUNCTIONS *************************/
 
 void serial_printf (const char *fmt, ...)
 {
 	va_list args;
 	uint i;
-	char printbuffer[CFG_PBSIZE];
+	char printbuffer[CONFIG_SYS_PBSIZE];
 
 	va_start (args, fmt);
 
@@ -114,8 +184,31 @@ void serial_printf (const char *fmt, ...)
 
 int fgetc (int file)
 {
-	if (file < MAX_FILES)
+	if (file < MAX_FILES) {
+#if defined(CONFIG_CONSOLE_MUX)
+		/*
+		 * Effectively poll for input wherever it may be available.
+		 */
+		for (;;) {
+			/*
+			 * Upper layer may have already called tstc() so
+			 * check for that first.
+			 */
+			if (tstcdev != NULL)
+				return iomux_getc();
+			iomux_tstc(file);
+#ifdef CONFIG_WATCHDOG
+			/*
+			 * If the watchdog must be rate-limited then it should
+			 * already be handled in board-specific code.
+			 */
+			 udelay(1);
+#endif
+		}
+#else
 		return stdio_devices[file]->getc ();
+#endif
+	}
 
 	return -1;
 }
@@ -123,7 +216,11 @@ int fgetc (int file)
 int ftstc (int file)
 {
 	if (file < MAX_FILES)
+#if defined(CONFIG_CONSOLE_MUX)
+		return iomux_tstc(file);
+#else
 		return stdio_devices[file]->tstc ();
+#endif
 
 	return -1;
 }
@@ -131,20 +228,28 @@ int ftstc (int file)
 void fputc (int file, const char c)
 {
 	if (file < MAX_FILES)
+#if defined(CONFIG_CONSOLE_MUX)
+		iomux_putc(file, c);
+#else
 		stdio_devices[file]->putc (c);
+#endif
 }
 
 void fputs (int file, const char *s)
 {
 	if (file < MAX_FILES)
+#if defined(CONFIG_CONSOLE_MUX)
+		iomux_puts(file, s);
+#else
 		stdio_devices[file]->puts (s);
+#endif
 }
 
 void fprintf (int file, const char *fmt, ...)
 {
 	va_list args;
 	uint i;
-	char printbuffer[CFG_PBSIZE];
+	char printbuffer[CONFIG_SYS_PBSIZE];
 
 	va_start (args, fmt);
 
@@ -162,6 +267,11 @@ void fprintf (int file, const char *fmt, ...)
 
 int getc (void)
 {
+#ifdef CONFIG_DISABLE_CONSOLE
+	if (gd->flags & GD_FLG_DISABLE_CONSOLE)
+		return 0;
+#endif
+
 	if (gd->flags & GD_FLG_DEVINIT) {
 		/* Get from the standard input */
 		return fgetc (stdin);
@@ -173,6 +283,11 @@ int getc (void)
 
 int tstc (void)
 {
+#ifdef CONFIG_DISABLE_CONSOLE
+	if (gd->flags & GD_FLG_DISABLE_CONSOLE)
+		return 0;
+#endif
+
 	if (gd->flags & GD_FLG_DEVINIT) {
 		/* Test the standard input */
 		return ftstc (stdin);
@@ -189,6 +304,11 @@ void putc (const char c)
 		return;
 #endif
 
+#ifdef CONFIG_DISABLE_CONSOLE
+	if (gd->flags & GD_FLG_DISABLE_CONSOLE)
+		return;
+#endif
+
 	if (gd->flags & GD_FLG_DEVINIT) {
 		/* Send to the standard output */
 		fputc (stdout, c);
@@ -205,6 +325,11 @@ void puts (const char *s)
 		return;
 #endif
 
+#ifdef CONFIG_DISABLE_CONSOLE
+	if (gd->flags & GD_FLG_DISABLE_CONSOLE)
+		return;
+#endif
+
 	if (gd->flags & GD_FLG_DEVINIT) {
 		/* Send to the standard output */
 		fputs (stdout, s);
@@ -218,7 +343,7 @@ void printf (const char *fmt, ...)
 {
 	va_list args;
 	uint i;
-	char printbuffer[CFG_PBSIZE];
+	char printbuffer[CONFIG_SYS_PBSIZE];
 
 	va_start (args, fmt);
 
@@ -235,7 +360,7 @@ void printf (const char *fmt, ...)
 void vprintf (const char *fmt, va_list args)
 {
 	uint i;
-	char printbuffer[CFG_PBSIZE];
+	char printbuffer[CONFIG_SYS_PBSIZE];
 
 	/* For this to work, printbuffer must be larger than
 	 * anything we ever want to print.
@@ -294,7 +419,7 @@ inline void dbg(const char *fmt, ...)
 {
 	va_list	args;
 	uint	i;
-	char	printbuffer[CFG_PBSIZE];
+	char	printbuffer[CONFIG_SYS_PBSIZE];
 
 	if (!once) {
 		memset(screen, 0, sizeof(screen));
@@ -378,15 +503,18 @@ int console_init_f (void)
 	return (0);
 }
 
-#ifdef CFG_CONSOLE_IS_IN_ENV
+#ifdef CONFIG_SYS_CONSOLE_IS_IN_ENV
 /* Called after the relocation - use desired console functions */
 int console_init_r (void)
 {
 	char *stdinname, *stdoutname, *stderrname;
 	device_t *inputdev = NULL, *outputdev = NULL, *errdev = NULL;
-#ifdef CFG_CONSOLE_ENV_OVERWRITE
+#ifdef CONFIG_SYS_CONSOLE_ENV_OVERWRITE
 	int i;
-#endif /* CFG_CONSOLE_ENV_OVERWRITE */
+#endif /* CONFIG_SYS_CONSOLE_ENV_OVERWRITE */
+#ifdef CONFIG_CONSOLE_MUX
+	int iomux_err = 0;
+#endif
 
 	/* set default handlers at first */
 	gd->jt[XF_getc] = serial_getc;
@@ -405,6 +533,14 @@ int console_init_r (void)
 		inputdev  = search_device (DEV_FLAGS_INPUT,  stdinname);
 		outputdev = search_device (DEV_FLAGS_OUTPUT, stdoutname);
 		errdev    = search_device (DEV_FLAGS_OUTPUT, stderrname);
+#ifdef CONFIG_CONSOLE_MUX
+		iomux_err = iomux_doenv(stdin, stdinname);
+		iomux_err += iomux_doenv(stdout, stdoutname);
+		iomux_err += iomux_doenv(stderr, stderrname);
+		if (!iomux_err)
+			/* Successful, so skip all the code below. */
+			goto done;
+#endif
 	}
 	/* if the devices are overwritten or not found, use default device */
 	if (inputdev == NULL) {
@@ -418,47 +554,78 @@ int console_init_r (void)
 	}
 	/* Initializes output console first */
 	if (outputdev != NULL) {
+#ifdef CONFIG_CONSOLE_MUX
+		/* need to set a console if not done above. */
+		iomux_doenv(stdout, outputdev->name);
+#else
 		console_setfile (stdout, outputdev);
+#endif
 	}
 	if (errdev != NULL) {
+#ifdef CONFIG_CONSOLE_MUX
+		/* need to set a console if not done above. */
+		iomux_doenv(stderr, errdev->name);
+#else
 		console_setfile (stderr, errdev);
+#endif
 	}
 	if (inputdev != NULL) {
+#ifdef CONFIG_CONSOLE_MUX
+		/* need to set a console if not done above. */
+		iomux_doenv(stdin, inputdev->name);
+#else
 		console_setfile (stdin, inputdev);
+#endif
 	}
 
+#ifdef CONFIG_CONSOLE_MUX
+done:
+#endif
+
 	gd->flags |= GD_FLG_DEVINIT;	/* device initialization completed */
 
-#ifndef CFG_CONSOLE_INFO_QUIET
+#ifndef CONFIG_SYS_CONSOLE_INFO_QUIET
 	/* Print information */
 	puts ("In:    ");
 	if (stdio_devices[stdin] == NULL) {
 		puts ("No input devices available!\n");
 	} else {
+#ifdef CONFIG_CONSOLE_MUX
+		iomux_printdevs(stdin);
+#else
 		printf ("%s\n", stdio_devices[stdin]->name);
+#endif
 	}
 
 	puts ("Out:   ");
 	if (stdio_devices[stdout] == NULL) {
 		puts ("No output devices available!\n");
 	} else {
+#ifdef CONFIG_CONSOLE_MUX
+		iomux_printdevs(stdout);
+#else
 		printf ("%s\n", stdio_devices[stdout]->name);
+#endif
 	}
 
 	puts ("Err:   ");
 	if (stdio_devices[stderr] == NULL) {
 		puts ("No error devices available!\n");
 	} else {
+#ifdef CONFIG_CONSOLE_MUX
+		iomux_printdevs(stderr);
+#else
 		printf ("%s\n", stdio_devices[stderr]->name);
+#endif
 	}
-#endif /* CFG_CONSOLE_INFO_QUIET */
+#endif /* CONFIG_SYS_CONSOLE_INFO_QUIET */
 
-#ifdef CFG_CONSOLE_ENV_OVERWRITE
+#ifdef CONFIG_SYS_CONSOLE_ENV_OVERWRITE
 	/* set the environment variables (will overwrite previous env settings) */
 	for (i = 0; i < 3; i++) {
 		setenv (stdio_names[i], stdio_devices[i]->name);
 	}
-#endif /* CFG_CONSOLE_ENV_OVERWRITE */
+#endif /* CONFIG_SYS_CONSOLE_ENV_OVERWRITE */
 
 #if 0
 	/* If nothing usable installed, use only the initial console */
@@ -468,7 +635,7 @@ int console_init_r (void)
 	return (0);
 }
 
-#else /* CFG_CONSOLE_IS_IN_ENV */
+#else /* CONFIG_SYS_CONSOLE_IS_IN_ENV */
 
 /* Called after the relocation - use desired console functions */
 int console_init_r (void)
@@ -504,16 +671,23 @@ int console_init_r (void)
 	if (outputdev != NULL) {
 		console_setfile (stdout, outputdev);
 		console_setfile (stderr, outputdev);
+#ifdef CONFIG_CONSOLE_MUX
+		console_devices[stdout][0] = outputdev;
+		console_devices[stderr][0] = outputdev;
+#endif
 	}
 
 	/* Initializes input console */
 	if (inputdev != NULL) {
 		console_setfile (stdin, inputdev);
+#ifdef CONFIG_CONSOLE_MUX
+		console_devices[stdin][0] = inputdev;
+#endif
 	}
 
 	gd->flags |= GD_FLG_DEVINIT;	/* device initialization completed */
 
-#ifndef CFG_CONSOLE_INFO_QUIET
+#ifndef CONFIG_SYS_CONSOLE_INFO_QUIET
 	/* Print information */
 	puts ("In:    ");
 	if (stdio_devices[stdin] == NULL) {
@@ -535,7 +709,7 @@ int console_init_r (void)
 	} else {
 		printf ("%s\n", stdio_devices[stderr]->name);
 	}
-#endif /* CFG_CONSOLE_INFO_QUIET */
+#endif /* CONFIG_SYS_CONSOLE_INFO_QUIET */
 
 	/* Setting environment variables */
 	for (i = 0; i < 3; i++) {
@@ -551,4 +725,4 @@ int console_init_r (void)
 	return (0);
 }
 
-#endif /* CFG_CONSOLE_IS_IN_ENV */
+#endif /* CONFIG_SYS_CONSOLE_IS_IN_ENV */
diff --git a/common/devices.c b/common/devices.c
index 297743642..ce3b7a00f 100644
--- a/common/devices.c
+++ b/common/devices.c
@@ -40,12 +40,12 @@ static device_t devs;
 device_t *stdio_devices[] = { NULL, NULL, NULL };
 char *stdio_names[MAX_FILES] = { "stdin", "stdout", "stderr" };
 
-#if defined(CONFIG_SPLASH_SCREEN) && !defined(CFG_DEVICE_NULLDEV)
-#define	CFG_DEVICE_NULLDEV	1
+#if defined(CONFIG_SPLASH_SCREEN) && !defined(CONFIG_SYS_DEVICE_NULLDEV)
+#define	CONFIG_SYS_DEVICE_NULLDEV	1
 #endif
 
 
-#ifdef CFG_DEVICE_NULLDEV
+#ifdef CONFIG_SYS_DEVICE_NULLDEV
 void nulldev_putc(const char c)
 {
 	/* nulldev is empty! */
@@ -90,7 +90,7 @@ static void drv_system_init (void)
 
 	device_register (&dev);
 
-#ifdef CFG_DEVICE_NULLDEV
+#ifdef CONFIG_SYS_DEVICE_NULLDEV
 	memset (&dev, 0, sizeof (dev));
 
 	strcpy (dev.name, "nulldev");
@@ -130,17 +130,39 @@ device_t* device_get_by_name(char* name)
 	return NULL;
 }
 
+device_t* device_clone(device_t *dev)
+{
+	device_t *_dev;
+
+	if(!dev)
+		return NULL;
+
+	_dev = calloc(1, sizeof(device_t));
+
+	if(!_dev)
+		return NULL;
+
+	memcpy(_dev, dev, sizeof(device_t));
+	strncpy(_dev->name, dev->name, 16);
+
+	return _dev;
+}
 
 int device_register (device_t * dev)
 {
-	list_add(&(dev->list), &(devs.list));
+	device_t *_dev;
+
+	_dev = device_clone(dev);
+	if(!_dev)
+		return -1;
+	list_add_tail(&(_dev->list), &(devs.list));
 	return 0;
 }
 
 /* deregister the device "devname".
  * returns 0 if success, -1 if device is assigned and 1 if devname not found
  */
-#ifdef	CFG_DEVICE_DEREGISTER
+#ifdef	CONFIG_SYS_DEVICE_DEREGISTER
 int device_deregister(char *devname)
 {
 	int l;
@@ -175,7 +197,7 @@ int device_deregister(char *devname)
 	}
 	return 0;
 }
-#endif	/* CFG_DEVICE_DEREGISTER */
+#endif	/* CONFIG_SYS_DEVICE_DEREGISTER */
 
 int devices_init (void)
 {
@@ -194,7 +216,7 @@ int devices_init (void)
 	INIT_LIST_HEAD(&(devs.list));
 
 #if defined(CONFIG_HARD_I2C) || defined(CONFIG_SOFT_I2C)
-	i2c_init (CFG_I2C_SPEED, CFG_I2C_SLAVE);
+	i2c_init (CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
 #endif
 #ifdef CONFIG_LCD
 	drv_lcd_init ();
diff --git a/common/env_common.c b/common/env_common.c
index d51c2114d..6be3bb04a 100644
--- a/common/env_common.c
+++ b/common/env_common.c
@@ -91,14 +91,20 @@ uchar default_environment[] = {
 #ifdef	CONFIG_ETH3ADDR
 	"eth3addr="	MK_STR(CONFIG_ETH3ADDR)		"\0"
 #endif
+#ifdef	CONFIG_ETH4ADDR
+	"eth4addr="	MK_STR(CONFIG_ETH4ADDR)		"\0"
+#endif
+#ifdef	CONFIG_ETH5ADDR
+	"eth5addr="	MK_STR(CONFIG_ETH5ADDR)		"\0"
+#endif
 #ifdef	CONFIG_IPADDR
 	"ipaddr="	MK_STR(CONFIG_IPADDR)		"\0"
 #endif
 #ifdef	CONFIG_SERVERIP
 	"serverip="	MK_STR(CONFIG_SERVERIP)		"\0"
 #endif
-#ifdef	CFG_AUTOLOAD
-	"autoload="	CFG_AUTOLOAD			"\0"
+#ifdef	CONFIG_SYS_AUTOLOAD
+	"autoload="	CONFIG_SYS_AUTOLOAD			"\0"
 #endif
 #ifdef	CONFIG_PREBOOT
 	"preboot="	CONFIG_PREBOOT			"\0"
@@ -133,8 +139,8 @@ uchar default_environment[] = {
 	"\0"
 };
 
-#if defined(CFG_ENV_IS_IN_NAND)		/* Environment is in Nand Flash */ \
-	|| defined(CFG_ENV_IS_IN_SPI_FLASH)
+#if defined(CONFIG_ENV_IS_IN_NAND)		/* Environment is in Nand Flash */ \
+	|| defined(CONFIG_ENV_IS_IN_SPI_FLASH)
 int default_environment_size = sizeof(default_environment);
 #endif
 
@@ -214,7 +220,7 @@ void set_default_env(void)
 	memset(env_ptr, 0, sizeof(env_t));
 	memcpy(env_ptr->data, default_environment,
 	       sizeof(default_environment));
-#ifdef CFG_REDUNDAND_ENVIRONMENT
+#ifdef CONFIG_SYS_REDUNDAND_ENVIRONMENT
 	env_ptr->flags = 0xFF;
 #endif
 	env_crc_update ();
@@ -241,12 +247,12 @@ void env_relocate (void)
 	/*
 	 * We must allocate a buffer for the environment
 	 */
-	env_ptr = (env_t *)malloc (CFG_ENV_SIZE);
+	env_ptr = (env_t *)malloc (CONFIG_ENV_SIZE);
 	DEBUGF ("%s[%d] malloced ENV at %p\n", __FUNCTION__,__LINE__,env_ptr);
 #endif
 
 	if (gd->env_valid == 0) {
-#if defined(CONFIG_GTH)	|| defined(CFG_ENV_IS_NOWHERE)	/* Environment not changable */
+#if defined(CONFIG_GTH)	|| defined(CONFIG_ENV_IS_NOWHERE)	/* Environment not changable */
 		puts ("Using default environment\n\n");
 #else
 		puts ("*** Warning - bad CRC, using default environment\n\n");
diff --git a/common/env_dataflash.c b/common/env_dataflash.c
index 294536461..fed919e67 100644
--- a/common/env_dataflash.c
+++ b/common/env_dataflash.c
@@ -18,9 +18,6 @@
  *
  */
 #include <common.h>
-
-#if defined(CFG_ENV_IS_IN_DATAFLASH) /* Environment is in DataFlash */
-
 #include <command.h>
 #include <environment.h>
 #include <linux/stddef.h>
@@ -44,22 +41,22 @@ extern uchar default_environment[];
 uchar env_get_char_spec (int index)
 {
 	uchar c;
-	read_dataflash(CFG_ENV_ADDR + index + offsetof(env_t,data),
+	read_dataflash(CONFIG_ENV_ADDR + index + offsetof(env_t,data),
 	1, (char *)&c);
 	return (c);
 }
 
 void env_relocate_spec (void)
 {
-	read_dataflash(CFG_ENV_ADDR, CFG_ENV_SIZE, (char *)env_ptr);
+	read_dataflash(CONFIG_ENV_ADDR, CONFIG_ENV_SIZE, (char *)env_ptr);
 }
 
 int saveenv(void)
 {
 	/* env must be copied to do not alter env structure in memory*/
-	unsigned char temp[CFG_ENV_SIZE];
-	memcpy(temp, env_ptr, CFG_ENV_SIZE);
-	return write_dataflash(CFG_ENV_ADDR, (unsigned long)temp, CFG_ENV_SIZE);
+	unsigned char temp[CONFIG_ENV_SIZE];
+	memcpy(temp, env_ptr, CONFIG_ENV_SIZE);
+	return write_dataflash(CONFIG_ENV_ADDR, (unsigned long)temp, CONFIG_ENV_SIZE);
 }
 
 /************************************************************************
@@ -77,14 +74,14 @@ int env_init(void)
 		AT91F_DataflashInit();	/* prepare for DATAFLASH read/write */
 
 		/* read old CRC */
-		read_dataflash(CFG_ENV_ADDR + offsetof(env_t, crc),
+		read_dataflash(CONFIG_ENV_ADDR + offsetof(env_t, crc),
 			sizeof(ulong), (char *)&crc);
 		new = 0;
 		len = ENV_SIZE;
 		off = offsetof(env_t,data);
 		while (len > 0) {
 			int n = (len > sizeof(buf)) ? sizeof(buf) : len;
-			read_dataflash(CFG_ENV_ADDR + off, n, (char *)buf);
+			read_dataflash(CONFIG_ENV_ADDR + off, n, (char *)buf);
 			new = crc32 (new, buf, n);
 			len -= n;
 			off += n;
@@ -100,5 +97,3 @@ int env_init(void)
 
 	return (0);
 }
-
-#endif /* CFG_ENV_IS_IN_DATAFLASH */
diff --git a/common/env_eeprom.c b/common/env_eeprom.c
index 9e1a20194..1578d61e6 100644
--- a/common/env_eeprom.c
+++ b/common/env_eeprom.c
@@ -25,9 +25,6 @@
  */
 
 #include <common.h>
-
-#if defined(CFG_ENV_IS_IN_EEPROM) /* Environment is in EEPROM */
-
 #include <command.h>
 #include <environment.h>
 #include <linux/stddef.h>
@@ -42,8 +39,8 @@ uchar env_get_char_spec (int index)
 {
 	uchar c;
 
-	eeprom_read (CFG_DEF_EEPROM_ADDR,
-		     CFG_ENV_OFFSET+index+offsetof(env_t,data),
+	eeprom_read (CONFIG_SYS_DEF_EEPROM_ADDR,
+		     CONFIG_ENV_OFFSET+index+offsetof(env_t,data),
 		     &c, 1);
 
 	return (c);
@@ -51,18 +48,18 @@ uchar env_get_char_spec (int index)
 
 void env_relocate_spec (void)
 {
-	eeprom_read (CFG_DEF_EEPROM_ADDR,
-		     CFG_ENV_OFFSET,
+	eeprom_read (CONFIG_SYS_DEF_EEPROM_ADDR,
+		     CONFIG_ENV_OFFSET,
 		     (uchar*)env_ptr,
-		     CFG_ENV_SIZE);
+		     CONFIG_ENV_SIZE);
 }
 
 int saveenv(void)
 {
-	return eeprom_write (CFG_DEF_EEPROM_ADDR,
-			     CFG_ENV_OFFSET,
+	return eeprom_write (CONFIG_SYS_DEF_EEPROM_ADDR,
+			     CONFIG_ENV_OFFSET,
 			     (uchar *)env_ptr,
-			     CFG_ENV_SIZE);
+			     CONFIG_ENV_SIZE);
 }
 
 /************************************************************************
@@ -80,8 +77,8 @@ int env_init(void)
 	eeprom_init ();	/* prepare for EEPROM read/write */
 
 	/* read old CRC */
-	eeprom_read (CFG_DEF_EEPROM_ADDR,
-		     CFG_ENV_OFFSET+offsetof(env_t,crc),
+	eeprom_read (CONFIG_SYS_DEF_EEPROM_ADDR,
+		     CONFIG_ENV_OFFSET+offsetof(env_t,crc),
 		     (uchar *)&crc, sizeof(ulong));
 
 	new = 0;
@@ -90,7 +87,7 @@ int env_init(void)
 	while (len > 0) {
 		int n = (len > sizeof(buf)) ? sizeof(buf) : len;
 
-		eeprom_read (CFG_DEF_EEPROM_ADDR, CFG_ENV_OFFSET+off, buf, n);
+		eeprom_read (CONFIG_SYS_DEF_EEPROM_ADDR, CONFIG_ENV_OFFSET+off, buf, n);
 		new = crc32 (new, buf, n);
 		len -= n;
 		off += n;
@@ -106,5 +103,3 @@ int env_init(void)
 
 	return (0);
 }
-
-#endif /* CFG_ENV_IS_IN_EEPROM */
diff --git a/common/environment.c b/common/env_embedded.c
index 3b9914f49..ae6cac439 100644
--- a/common/environment.c
+++ b/common/env_embedded.c
@@ -51,7 +51,7 @@
  * a seperate section.  Note that ENV_CRC is only defined when building
  * U-Boot itself.
  */
-#if (defined(CFG_USE_PPCENV) || defined(CONFIG_NAND_U_BOOT)) && \
+#if (defined(CONFIG_SYS_USE_PPCENV) || defined(CONFIG_NAND_U_BOOT)) && \
      defined(ENV_CRC) /* Environment embedded in U-Boot .ppcenv section */
 /* XXX - This only works with GNU C */
 #  define __PPCENV__ __attribute__ ((section(".ppcenv")))
@@ -98,7 +98,7 @@
 
 env_t environment __PPCENV__ = {
 	ENV_CRC,	/* CRC Sum */
-#ifdef CFG_REDUNDAND_ENVIRONMENT
+#ifdef CONFIG_SYS_REDUNDAND_ENVIRONMENT
 	1,		/* Flags: valid */
 #endif
 	{
@@ -135,6 +135,12 @@ env_t environment __PPCENV__ = {
 #ifdef	CONFIG_ETH3ADDR
 	"eth3addr="	MK_STR(CONFIG_ETH3ADDR)		"\0"
 #endif
+#ifdef	CONFIG_ETH4ADDR
+	"eth4addr="	MK_STR(CONFIG_ETH4ADDR)		"\0"
+#endif
+#ifdef	CONFIG_ETH5ADDR
+	"eth5addr="	MK_STR(CONFIG_ETH5ADDR)		"\0"
+#endif
 #ifdef	CONFIG_ETHPRIME
 	"ethprime="	CONFIG_ETHPRIME			"\0"
 #endif
@@ -144,8 +150,8 @@ env_t environment __PPCENV__ = {
 #ifdef	CONFIG_SERVERIP
 	"serverip="	MK_STR(CONFIG_SERVERIP)		"\0"
 #endif
-#ifdef	CFG_AUTOLOAD
-	"autoload="	CFG_AUTOLOAD			"\0"
+#ifdef	CONFIG_SYS_AUTOLOAD
+	"autoload="	CONFIG_SYS_AUTOLOAD			"\0"
 #endif
 #ifdef	CONFIG_ROOTPATH
 	"rootpath="	MK_STR(CONFIG_ROOTPATH)		"\0"
@@ -180,7 +186,7 @@ env_t environment __PPCENV__ = {
 	"\0"		/* Term. env_t.data with 2 NULs */
 	}
 };
-#ifdef CFG_ENV_ADDR_REDUND
+#ifdef CONFIG_ENV_ADDR_REDUND
 env_t redundand_environment __PPCENV__ = {
 	0,		/* CRC Sum: invalid */
 	0,		/* Flags:   invalid */
@@ -188,7 +194,7 @@ env_t redundand_environment __PPCENV__ = {
 	"\0"
 	}
 };
-#endif	/* CFG_ENV_ADDR_REDUND */
+#endif	/* CONFIG_ENV_ADDR_REDUND */
 
 /*
  * These will end up in the .text section
@@ -203,6 +209,6 @@ unsigned long env_size __PPCTEXT__ = sizeof(env_t);
 /*
  * Add in absolutes.
  */
-GEN_ABS(env_offset, CFG_ENV_OFFSET);
+GEN_ABS(env_offset, CONFIG_ENV_OFFSET);
 
 #endif /* ENV_IS_EMBEDDED */
diff --git a/common/env_flash.c b/common/env_flash.c
index a92160ddf..75ee8ddc8 100644
--- a/common/env_flash.c
+++ b/common/env_flash.c
@@ -27,9 +27,6 @@
 /* #define DEBUG */
 
 #include <common.h>
-
-#if defined(CFG_ENV_IS_IN_FLASH) /* Environment is in Flash */
-
 #include <command.h>
 #include <environment.h>
 #include <linux/stddef.h>
@@ -39,17 +36,17 @@ DECLARE_GLOBAL_DATA_PTR;
 
 #if defined(CONFIG_CMD_ENV) && defined(CONFIG_CMD_FLASH)
 #define CMD_SAVEENV
-#elif defined(CFG_ENV_ADDR_REDUND)
-#error Cannot use CFG_ENV_ADDR_REDUND without CONFIG_CMD_ENV & CONFIG_CMD_FLASH
+#elif defined(CONFIG_ENV_ADDR_REDUND)
+#error Cannot use CONFIG_ENV_ADDR_REDUND without CONFIG_CMD_ENV & CONFIG_CMD_FLASH
 #endif
 
-#if defined(CFG_ENV_SIZE_REDUND) && (CFG_ENV_SIZE_REDUND < CFG_ENV_SIZE)
-#error CFG_ENV_SIZE_REDUND should not be less then CFG_ENV_SIZE
+#if defined(CONFIG_ENV_SIZE_REDUND) && (CONFIG_ENV_SIZE_REDUND < CONFIG_ENV_SIZE)
+#error CONFIG_ENV_SIZE_REDUND should not be less then CONFIG_ENV_SIZE
 #endif
 
 #ifdef CONFIG_INFERNO
-# ifdef CFG_ENV_ADDR_REDUND
-#error CFG_ENV_ADDR_REDUND is not implemented for CONFIG_INFERNO
+# ifdef CONFIG_ENV_ADDR_REDUND
+#error CONFIG_ENV_ADDR_REDUND is not implemented for CONFIG_INFERNO
 # endif
 #endif
 
@@ -62,28 +59,28 @@ env_t *env_ptr = (env_t *)(&environment[0]);
 
 #ifdef CMD_SAVEENV
 /* static env_t *flash_addr = (env_t *)(&environment[0]);-broken on ARM-wd-*/
-static env_t *flash_addr = (env_t *)CFG_ENV_ADDR;
+static env_t *flash_addr = (env_t *)CONFIG_ENV_ADDR;
 #endif
 
 #else /* ! ENV_IS_EMBEDDED */
 
-env_t *env_ptr = (env_t *)CFG_ENV_ADDR;
+env_t *env_ptr = (env_t *)CONFIG_ENV_ADDR;
 #ifdef CMD_SAVEENV
-static env_t *flash_addr = (env_t *)CFG_ENV_ADDR;
+static env_t *flash_addr = (env_t *)CONFIG_ENV_ADDR;
 #endif
 
 #endif /* ENV_IS_EMBEDDED */
 
-#ifdef CFG_ENV_ADDR_REDUND
-static env_t *flash_addr_new = (env_t *)CFG_ENV_ADDR_REDUND;
+#ifdef CONFIG_ENV_ADDR_REDUND
+static env_t *flash_addr_new = (env_t *)CONFIG_ENV_ADDR_REDUND;
 
-/* CFG_ENV_ADDR is supposed to be on sector boundary */
-static ulong end_addr = CFG_ENV_ADDR + CFG_ENV_SECT_SIZE - 1;
-static ulong end_addr_new = CFG_ENV_ADDR_REDUND + CFG_ENV_SECT_SIZE - 1;
+/* CONFIG_ENV_ADDR is supposed to be on sector boundary */
+static ulong end_addr = CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE - 1;
+static ulong end_addr_new = CONFIG_ENV_ADDR_REDUND + CONFIG_ENV_SECT_SIZE - 1;
 
 #define ACTIVE_FLAG   1
 #define OBSOLETE_FLAG 0
-#endif /* CFG_ENV_ADDR_REDUND */
+#endif /* CONFIG_ENV_ADDR_REDUND */
 
 extern uchar default_environment[];
 extern int default_environment_size;
@@ -94,7 +91,7 @@ uchar env_get_char_spec (int index)
 	return ( *((uchar *)(gd->env_addr + index)) );
 }
 
-#ifdef CFG_ENV_ADDR_REDUND
+#ifdef CONFIG_ENV_ADDR_REDUND
 
 int  env_init(void)
 {
@@ -145,7 +142,7 @@ int saveenv(void)
 	char *saved_data = NULL;
 	int rc = 1;
 	char flag = OBSOLETE_FLAG, new_flag = ACTIVE_FLAG;
-#if CFG_ENV_SECT_SIZE > CFG_ENV_SIZE
+#if CONFIG_ENV_SECT_SIZE > CONFIG_ENV_SIZE
 	ulong up_data = 0;
 #endif
 
@@ -163,8 +160,8 @@ int saveenv(void)
 		goto Done;
 	}
 
-#if CFG_ENV_SECT_SIZE > CFG_ENV_SIZE
-	up_data = (end_addr_new + 1 - ((long)flash_addr_new + CFG_ENV_SIZE));
+#if CONFIG_ENV_SECT_SIZE > CONFIG_ENV_SIZE
+	up_data = (end_addr_new + 1 - ((long)flash_addr_new + CONFIG_ENV_SIZE));
 	debug ("Data to save 0x%x\n", up_data);
 	if (up_data) {
 		if ((saved_data = malloc(up_data)) == NULL) {
@@ -173,9 +170,9 @@ int saveenv(void)
 			goto Done;
 		}
 		memcpy(saved_data,
-			(void *)((long)flash_addr_new + CFG_ENV_SIZE), up_data);
+			(void *)((long)flash_addr_new + CONFIG_ENV_SIZE), up_data);
 		debug ("Data (start 0x%x, len 0x%x) saved at 0x%x\n",
-			   (long)flash_addr_new + CFG_ENV_SIZE,
+			   (long)flash_addr_new + CONFIG_ENV_SIZE,
 				up_data, saved_data);
 	}
 #endif
@@ -209,12 +206,12 @@ int saveenv(void)
 	}
 	puts ("done\n");
 
-#if CFG_ENV_SECT_SIZE > CFG_ENV_SIZE
+#if CONFIG_ENV_SECT_SIZE > CONFIG_ENV_SIZE
 	if (up_data) { /* restore the rest of sector */
 		debug ("Restoring the rest of data to 0x%x len 0x%x\n",
-			   (long)flash_addr_new + CFG_ENV_SIZE, up_data);
+			   (long)flash_addr_new + CONFIG_ENV_SIZE, up_data);
 		if (flash_write(saved_data,
-				(long)flash_addr_new + CFG_ENV_SIZE,
+				(long)flash_addr_new + CONFIG_ENV_SIZE,
 				up_data)) {
 			flash_perror(rc);
 			goto Done;
@@ -245,7 +242,7 @@ Done:
 }
 #endif /* CMD_SAVEENV */
 
-#else /* ! CFG_ENV_ADDR_REDUND */
+#else /* ! CONFIG_ENV_ADDR_REDUND */
 
 int  env_init(void)
 {
@@ -267,36 +264,36 @@ int saveenv(void)
 	int	len, rc;
 	ulong	end_addr;
 	ulong	flash_sect_addr;
-#if defined(CFG_ENV_SECT_SIZE) && (CFG_ENV_SECT_SIZE > CFG_ENV_SIZE)
+#if defined(CONFIG_ENV_SECT_SIZE) && (CONFIG_ENV_SECT_SIZE > CONFIG_ENV_SIZE)
 	ulong	flash_offset;
-	uchar	env_buffer[CFG_ENV_SECT_SIZE];
+	uchar	env_buffer[CONFIG_ENV_SECT_SIZE];
 #else
 	uchar *env_buffer = (uchar *)env_ptr;
-#endif	/* CFG_ENV_SECT_SIZE */
+#endif	/* CONFIG_ENV_SECT_SIZE */
 	int rcode = 0;
 
-#if defined(CFG_ENV_SECT_SIZE) && (CFG_ENV_SECT_SIZE > CFG_ENV_SIZE)
+#if defined(CONFIG_ENV_SECT_SIZE) && (CONFIG_ENV_SECT_SIZE > CONFIG_ENV_SIZE)
 
-	flash_offset    = ((ulong)flash_addr) & (CFG_ENV_SECT_SIZE-1);
-	flash_sect_addr = ((ulong)flash_addr) & ~(CFG_ENV_SECT_SIZE-1);
+	flash_offset    = ((ulong)flash_addr) & (CONFIG_ENV_SECT_SIZE-1);
+	flash_sect_addr = ((ulong)flash_addr) & ~(CONFIG_ENV_SECT_SIZE-1);
 
 	debug ( "copy old content: "
 		"sect_addr: %08lX  env_addr: %08lX  offset: %08lX\n",
 		flash_sect_addr, (ulong)flash_addr, flash_offset);
 
 	/* copy old contents to temporary buffer */
-	memcpy (env_buffer, (void *)flash_sect_addr, CFG_ENV_SECT_SIZE);
+	memcpy (env_buffer, (void *)flash_sect_addr, CONFIG_ENV_SECT_SIZE);
 
 	/* copy current environment to temporary buffer */
 	memcpy ((uchar *)((unsigned long)env_buffer + flash_offset),
 		env_ptr,
-		CFG_ENV_SIZE);
+		CONFIG_ENV_SIZE);
 
-	len	 = CFG_ENV_SECT_SIZE;
+	len	 = CONFIG_ENV_SECT_SIZE;
 #else
 	flash_sect_addr = (ulong)flash_addr;
-	len	 = CFG_ENV_SIZE;
-#endif	/* CFG_ENV_SECT_SIZE */
+	len	 = CONFIG_ENV_SIZE;
+#endif	/* CONFIG_ENV_SECT_SIZE */
 
 #ifndef CONFIG_INFERNO
 	end_addr = flash_sect_addr + len - 1;
@@ -332,12 +329,12 @@ int saveenv(void)
 
 #endif /* CMD_SAVEENV */
 
-#endif /* CFG_ENV_ADDR_REDUND */
+#endif /* CONFIG_ENV_ADDR_REDUND */
 
 void env_relocate_spec (void)
 {
-#if !defined(ENV_IS_EMBEDDED) || defined(CFG_ENV_ADDR_REDUND)
-#ifdef CFG_ENV_ADDR_REDUND
+#if !defined(ENV_IS_EMBEDDED) || defined(CONFIG_ENV_ADDR_REDUND)
+#ifdef CONFIG_ENV_ADDR_REDUND
 	if (gd->env_addr != (ulong)&(flash_addr->data)) {
 		env_t * etmp = flash_addr;
 		ulong ltmp = end_addr;
@@ -377,11 +374,9 @@ void env_relocate_spec (void)
 	if (gd->env_valid == 2)
 		puts ("*** Warning - some problems detected "
 		      "reading environment; recovered successfully\n\n");
-#endif /* CFG_ENV_ADDR_REDUND */
+#endif /* CONFIG_ENV_ADDR_REDUND */
 #ifdef CMD_SAVEENV
-	memcpy (env_ptr, (void*)flash_addr, CFG_ENV_SIZE);
+	memcpy (env_ptr, (void*)flash_addr, CONFIG_ENV_SIZE);
 #endif
-#endif /* ! ENV_IS_EMBEDDED || CFG_ENV_ADDR_REDUND */
+#endif /* ! ENV_IS_EMBEDDED || CONFIG_ENV_ADDR_REDUND */
 }
-
-#endif /* CFG_ENV_IS_IN_FLASH */
diff --git a/common/env_nand.c b/common/env_nand.c
index a8f0de7ae..8af9e74aa 100644
--- a/common/env_nand.c
+++ b/common/env_nand.c
@@ -33,9 +33,6 @@
 /* #define DEBUG */
 
 #include <common.h>
-
-#if defined(CFG_ENV_IS_IN_NAND) /* Environment is in Nand Flash */
-
 #include <command.h>
 #include <environment.h>
 #include <linux/stddef.h>
@@ -44,20 +41,20 @@
 
 #if defined(CONFIG_CMD_ENV) && defined(CONFIG_CMD_NAND)
 #define CMD_SAVEENV
-#elif defined(CFG_ENV_OFFSET_REDUND)
-#error Cannot use CFG_ENV_OFFSET_REDUND without CONFIG_CMD_ENV & CONFIG_CMD_NAND
+#elif defined(CONFIG_ENV_OFFSET_REDUND)
+#error Cannot use CONFIG_ENV_OFFSET_REDUND without CONFIG_CMD_ENV & CONFIG_CMD_NAND
 #endif
 
-#if defined(CFG_ENV_SIZE_REDUND) && (CFG_ENV_SIZE_REDUND != CFG_ENV_SIZE)
-#error CFG_ENV_SIZE_REDUND should be the same as CFG_ENV_SIZE
+#if defined(CONFIG_ENV_SIZE_REDUND) && (CONFIG_ENV_SIZE_REDUND != CONFIG_ENV_SIZE)
+#error CONFIG_ENV_SIZE_REDUND should be the same as CONFIG_ENV_SIZE
 #endif
 
 #ifdef CONFIG_INFERNO
 #error CONFIG_INFERNO not supported yet
 #endif
 
-#ifndef CFG_ENV_RANGE
-#define CFG_ENV_RANGE	CFG_ENV_SIZE
+#ifndef CONFIG_ENV_RANGE
+#define CONFIG_ENV_RANGE	CONFIG_ENV_SIZE
 #endif
 
 int nand_legacy_rw (struct nand_chip* nand, int cmd,
@@ -110,10 +107,10 @@ int env_init(void)
 	int crc1_ok = 0, crc2_ok = 0;
 	env_t *tmp_env1, *tmp_env2;
 
-	total = CFG_ENV_SIZE;
+	total = CONFIG_ENV_SIZE;
 
 	tmp_env1 = env_ptr;
-	tmp_env2 = (env_t *)((ulong)env_ptr + CFG_ENV_SIZE);
+	tmp_env2 = (env_t *)((ulong)env_ptr + CONFIG_ENV_SIZE);
 
 	crc1_ok = (crc32(0, tmp_env1->data, ENV_SIZE) == tmp_env1->crc);
 	crc2_ok = (crc32(0, tmp_env2->data, ENV_SIZE) == tmp_env2->crc);
@@ -157,16 +154,16 @@ int env_init(void)
  */
 int writeenv(size_t offset, u_char *buf)
 {
-	size_t end = offset + CFG_ENV_RANGE;
+	size_t end = offset + CONFIG_ENV_RANGE;
 	size_t amount_saved = 0;
 	size_t blocksize, len;
 
 	u_char *char_ptr;
 
 	blocksize = nand_info[0].erasesize;
-	len = min(blocksize, CFG_ENV_SIZE);
+	len = min(blocksize, CONFIG_ENV_SIZE);
 
-	while (amount_saved < CFG_ENV_SIZE && offset < end) {
+	while (amount_saved < CONFIG_ENV_SIZE && offset < end) {
 		if (nand_block_isbad(&nand_info[0], offset)) {
 			offset += blocksize;
 		} else {
@@ -178,12 +175,12 @@ int writeenv(size_t offset, u_char *buf)
 			amount_saved += len;
 		}
 	}
-	if (amount_saved != CFG_ENV_SIZE)
+	if (amount_saved != CONFIG_ENV_SIZE)
 		return 1;
 
 	return 0;
 }
-#ifdef CFG_ENV_OFFSET_REDUND
+#ifdef CONFIG_ENV_OFFSET_REDUND
 int saveenv(void)
 {
 	size_t total;
@@ -191,31 +188,31 @@ int saveenv(void)
 	nand_erase_options_t nand_erase_options;
 
 	env_ptr->flags++;
-	total = CFG_ENV_SIZE;
+	total = CONFIG_ENV_SIZE;
 
-	nand_erase_options.length = CFG_ENV_RANGE;
+	nand_erase_options.length = CONFIG_ENV_RANGE;
 	nand_erase_options.quiet = 0;
 	nand_erase_options.jffs2 = 0;
 	nand_erase_options.scrub = 0;
 
-	if (CFG_ENV_RANGE < CFG_ENV_SIZE)
+	if (CONFIG_ENV_RANGE < CONFIG_ENV_SIZE)
 		return 1;
 	if(gd->env_valid == 1) {
 		puts ("Erasing redundant Nand...\n");
-		nand_erase_options.offset = CFG_ENV_OFFSET_REDUND;
+		nand_erase_options.offset = CONFIG_ENV_OFFSET_REDUND;
 		if (nand_erase_opts(&nand_info[0], &nand_erase_options))
 			return 1;
 
 		puts ("Writing to redundant Nand... ");
-		ret = writeenv(CFG_ENV_OFFSET_REDUND, (u_char *) env_ptr);
+		ret = writeenv(CONFIG_ENV_OFFSET_REDUND, (u_char *) env_ptr);
 	} else {
 		puts ("Erasing Nand...\n");
-		nand_erase_options.offset = CFG_ENV_OFFSET;
+		nand_erase_options.offset = CONFIG_ENV_OFFSET;
 		if (nand_erase_opts(&nand_info[0], &nand_erase_options))
 			return 1;
 
 		puts ("Writing to Nand... ");
-		ret = writeenv(CFG_ENV_OFFSET, (u_char *) env_ptr);
+		ret = writeenv(CONFIG_ENV_OFFSET, (u_char *) env_ptr);
 	}
 	if (ret) {
 		puts("FAILED!\n");
@@ -226,28 +223,28 @@ int saveenv(void)
 	gd->env_valid = (gd->env_valid == 2 ? 1 : 2);
 	return ret;
 }
-#else /* ! CFG_ENV_OFFSET_REDUND */
+#else /* ! CONFIG_ENV_OFFSET_REDUND */
 int saveenv(void)
 {
 	size_t total;
 	int ret = 0;
 	nand_erase_options_t nand_erase_options;
 
-	nand_erase_options.length = CFG_ENV_RANGE;
+	nand_erase_options.length = CONFIG_ENV_RANGE;
 	nand_erase_options.quiet = 0;
 	nand_erase_options.jffs2 = 0;
 	nand_erase_options.scrub = 0;
-	nand_erase_options.offset = CFG_ENV_OFFSET;
+	nand_erase_options.offset = CONFIG_ENV_OFFSET;
 
-	if (CFG_ENV_RANGE < CFG_ENV_SIZE)
+	if (CONFIG_ENV_RANGE < CONFIG_ENV_SIZE)
 		return 1;
 	puts ("Erasing Nand...\n");
 	if (nand_erase_opts(&nand_info[0], &nand_erase_options))
 		return 1;
 
 	puts ("Writing to Nand... ");
-	total = CFG_ENV_SIZE;
-	if (writeenv(CFG_ENV_OFFSET, (u_char *) env_ptr)) {
+	total = CONFIG_ENV_SIZE;
+	if (writeenv(CONFIG_ENV_OFFSET, (u_char *) env_ptr)) {
 		puts("FAILED!\n");
 		return 1;
 	}
@@ -255,21 +252,21 @@ int saveenv(void)
 	puts ("done\n");
 	return ret;
 }
-#endif /* CFG_ENV_OFFSET_REDUND */
+#endif /* CONFIG_ENV_OFFSET_REDUND */
 #endif /* CMD_SAVEENV */
 
 int readenv (size_t offset, u_char * buf)
 {
-	size_t end = offset + CFG_ENV_RANGE;
+	size_t end = offset + CONFIG_ENV_RANGE;
 	size_t amount_loaded = 0;
 	size_t blocksize, len;
 
 	u_char *char_ptr;
 
 	blocksize = nand_info[0].erasesize;
-	len = min(blocksize, CFG_ENV_SIZE);
+	len = min(blocksize, CONFIG_ENV_SIZE);
 
-	while (amount_loaded < CFG_ENV_SIZE && offset < end) {
+	while (amount_loaded < CONFIG_ENV_SIZE && offset < end) {
 		if (nand_block_isbad(&nand_info[0], offset)) {
 			offset += blocksize;
 		} else {
@@ -280,13 +277,13 @@ int readenv (size_t offset, u_char * buf)
 			amount_loaded += len;
 		}
 	}
-	if (amount_loaded != CFG_ENV_SIZE)
+	if (amount_loaded != CONFIG_ENV_SIZE)
 		return 1;
 
 	return 0;
 }
 
-#ifdef CFG_ENV_OFFSET_REDUND
+#ifdef CONFIG_ENV_OFFSET_REDUND
 void env_relocate_spec (void)
 {
 #if !defined(ENV_IS_EMBEDDED)
@@ -294,14 +291,14 @@ void env_relocate_spec (void)
 	int crc1_ok = 0, crc2_ok = 0;
 	env_t *tmp_env1, *tmp_env2;
 
-	total = CFG_ENV_SIZE;
+	total = CONFIG_ENV_SIZE;
 
-	tmp_env1 = (env_t *) malloc(CFG_ENV_SIZE);
-	tmp_env2 = (env_t *) malloc(CFG_ENV_SIZE);
+	tmp_env1 = (env_t *) malloc(CONFIG_ENV_SIZE);
+	tmp_env2 = (env_t *) malloc(CONFIG_ENV_SIZE);
 
-	if (readenv(CFG_ENV_OFFSET, (u_char *) tmp_env1))
+	if (readenv(CONFIG_ENV_OFFSET, (u_char *) tmp_env1))
 		puts("No Valid Environment Area Found\n");
-	if (readenv(CFG_ENV_OFFSET_REDUND, (u_char *) tmp_env2))
+	if (readenv(CONFIG_ENV_OFFSET_REDUND, (u_char *) tmp_env2))
 		puts("No Valid Reundant Environment Area Found\n");
 
 	crc1_ok = (crc32(0, tmp_env1->data, ENV_SIZE) == tmp_env1->crc);
@@ -339,7 +336,7 @@ void env_relocate_spec (void)
 
 #endif /* ! ENV_IS_EMBEDDED */
 }
-#else /* ! CFG_ENV_OFFSET_REDUND */
+#else /* ! CONFIG_ENV_OFFSET_REDUND */
 /*
  * The legacy NAND code saved the environment in the first NAND device i.e.,
  * nand_dev_desc + 0. This is also the behaviour using the new NAND code.
@@ -349,7 +346,7 @@ void env_relocate_spec (void)
 #if !defined(ENV_IS_EMBEDDED)
 	int ret;
 
-	ret = readenv(CFG_ENV_OFFSET, (u_char *) env_ptr);
+	ret = readenv(CONFIG_ENV_OFFSET, (u_char *) env_ptr);
 	if (ret)
 		return use_default();
 
@@ -357,7 +354,7 @@ void env_relocate_spec (void)
 		return use_default();
 #endif /* ! ENV_IS_EMBEDDED */
 }
-#endif /* CFG_ENV_OFFSET_REDUND */
+#endif /* CONFIG_ENV_OFFSET_REDUND */
 
 #if !defined(ENV_IS_EMBEDDED)
 static void use_default()
@@ -366,5 +363,3 @@ static void use_default()
 	set_default_env();
 }
 #endif
-
-#endif /* CFG_ENV_IS_IN_NAND */
diff --git a/common/env_nowhere.c b/common/env_nowhere.c
index 17ecc775f..78e8f8eb4 100644
--- a/common/env_nowhere.c
+++ b/common/env_nowhere.c
@@ -25,9 +25,6 @@
  */
 
 #include <common.h>
-
-#if defined(CFG_ENV_IS_NOWHERE) /* Environment is nowhere */
-
 #include <command.h>
 #include <environment.h>
 #include <linux/stddef.h>
@@ -61,5 +58,3 @@ int  env_init(void)
 
 	return (0);
 }
-
-#endif /* CFG_ENV_IS_NOWHERE) */
diff --git a/common/env_nvram.c b/common/env_nvram.c
index fa7771912..562edd049 100644
--- a/common/env_nvram.c
+++ b/common/env_nvram.c
@@ -35,27 +35,24 @@
  * space using its address and data registers. To enable usage of
  * NVRAM in those cases I invented the functions 'nvram_read()' and
  * 'nvram_write()', which will be activated upon the configuration
- * #define CFG_NVRAM_ACCESS_ROUTINE. Note, that those functions are
+ * #define CONFIG_SYS_NVRAM_ACCESS_ROUTINE. Note, that those functions are
  * strongly dependent on the used HW, and must be redefined for each
  * board that wants to use them.
  */
 
 #include <common.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#ifdef CFG_ENV_IS_IN_NVRAM /* Environment is in NVRAM */
-
 #include <command.h>
 #include <environment.h>
 #include <linux/stddef.h>
 
-#ifdef CFG_NVRAM_ACCESS_ROUTINE
+DECLARE_GLOBAL_DATA_PTR;
+
+#ifdef CONFIG_SYS_NVRAM_ACCESS_ROUTINE
 extern void *nvram_read(void *dest, const long src, size_t count);
 extern void nvram_write(long dest, const void *src, size_t count);
 env_t *env_ptr = NULL;
 #else
-env_t *env_ptr = (env_t *)CFG_ENV_ADDR;
+env_t *env_ptr = (env_t *)CONFIG_ENV_ADDR;
 #endif
 
 char * env_name_spec = "NVRAM";
@@ -66,10 +63,10 @@ extern int default_environment_size;
 #ifdef CONFIG_AMIGAONEG3SE
 uchar env_get_char_spec (int index)
 {
-#ifdef CFG_NVRAM_ACCESS_ROUTINE
+#ifdef CONFIG_SYS_NVRAM_ACCESS_ROUTINE
 	uchar c;
 
-	nvram_read(&c, CFG_ENV_ADDR+index, 1);
+	nvram_read(&c, CONFIG_ENV_ADDR+index, 1);
 
 	return c;
 #else
@@ -83,10 +80,10 @@ uchar env_get_char_spec (int index)
 #else
 uchar env_get_char_spec (int index)
 {
-#ifdef CFG_NVRAM_ACCESS_ROUTINE
+#ifdef CONFIG_SYS_NVRAM_ACCESS_ROUTINE
 	uchar c;
 
-	nvram_read(&c, CFG_ENV_ADDR+index, 1);
+	nvram_read(&c, CONFIG_ENV_ADDR+index, 1);
 
 	return c;
 #else
@@ -97,10 +94,10 @@ uchar env_get_char_spec (int index)
 
 void env_relocate_spec (void)
 {
-#if defined(CFG_NVRAM_ACCESS_ROUTINE)
-	nvram_read(env_ptr, CFG_ENV_ADDR, CFG_ENV_SIZE);
+#if defined(CONFIG_SYS_NVRAM_ACCESS_ROUTINE)
+	nvram_read(env_ptr, CONFIG_ENV_ADDR, CONFIG_ENV_SIZE);
 #else
-	memcpy (env_ptr, (void*)CFG_ENV_ADDR, CFG_ENV_SIZE);
+	memcpy (env_ptr, (void*)CONFIG_ENV_ADDR, CONFIG_ENV_SIZE);
 #endif
 }
 
@@ -110,10 +107,10 @@ int saveenv (void)
 #ifdef CONFIG_AMIGAONEG3SE
 	enable_nvram();
 #endif
-#ifdef CFG_NVRAM_ACCESS_ROUTINE
-	nvram_write(CFG_ENV_ADDR, env_ptr, CFG_ENV_SIZE);
+#ifdef CONFIG_SYS_NVRAM_ACCESS_ROUTINE
+	nvram_write(CONFIG_ENV_ADDR, env_ptr, CONFIG_ENV_SIZE);
 #else
-	if (memcpy ((char *)CFG_ENV_ADDR, env_ptr, CFG_ENV_SIZE) == NULL)
+	if (memcpy ((char *)CONFIG_ENV_ADDR, env_ptr, CONFIG_ENV_SIZE) == NULL)
 		    rcode = 1 ;
 #endif
 #ifdef CONFIG_AMIGAONEG3SE
@@ -134,14 +131,14 @@ int env_init (void)
 #ifdef CONFIG_AMIGAONEG3SE
 	enable_nvram();
 #endif
-#if defined(CFG_NVRAM_ACCESS_ROUTINE)
+#if defined(CONFIG_SYS_NVRAM_ACCESS_ROUTINE)
 	ulong crc;
 	uchar data[ENV_SIZE];
-	nvram_read (&crc, CFG_ENV_ADDR, sizeof(ulong));
-	nvram_read (data, CFG_ENV_ADDR+sizeof(ulong), ENV_SIZE);
+	nvram_read (&crc, CONFIG_ENV_ADDR, sizeof(ulong));
+	nvram_read (data, CONFIG_ENV_ADDR+sizeof(ulong), ENV_SIZE);
 
 	if (crc32(0, data, ENV_SIZE) == crc) {
-		gd->env_addr  = (ulong)CFG_ENV_ADDR + sizeof(long);
+		gd->env_addr  = (ulong)CONFIG_ENV_ADDR + sizeof(long);
 #else
 	if (crc32(0, env_ptr->data, ENV_SIZE) == env_ptr->crc) {
 		gd->env_addr  = (ulong)&(env_ptr->data);
@@ -156,5 +153,3 @@ int env_init (void)
 #endif
 	return (0);
 }
-
-#endif /* CFG_ENV_IS_IN_NVRAM */
diff --git a/common/env_onenand.c b/common/env_onenand.c
index d5c907c6f..dbccc7912 100644
--- a/common/env_onenand.c
+++ b/common/env_onenand.c
@@ -22,9 +22,6 @@
  */
 
 #include <common.h>
-
-#if defined(CFG_ENV_IS_IN_ONENAND)	/* Environment is in OneNAND */
-
 #include <command.h>
 #include <environment.h>
 #include <linux/stddef.h>
@@ -65,7 +62,7 @@ void env_relocate_spec(void)
 	int use_default = 0;
 	size_t retlen;
 
-	env_addr = CFG_ENV_ADDR;
+	env_addr = CONFIG_ENV_ADDR;
 
 	/* Check OneNAND exist */
 	if (onenand_mtd.writesize)
@@ -92,14 +89,15 @@ void env_relocate_spec(void)
 
 int saveenv(void)
 {
-	unsigned long env_addr = CFG_ENV_ADDR;
+	unsigned long env_addr = CONFIG_ENV_ADDR;
 	struct erase_info instr = {
 		.callback	= NULL,
 	};
 	size_t retlen;
 
-	instr.len = CFG_ENV_SIZE;
+	instr.len = CONFIG_ENV_SIZE;
 	instr.addr = env_addr;
+	instr.mtd = &onenand_mtd;
 	if (onenand_erase(&onenand_mtd, &instr)) {
 		printf("OneNAND: erase failed at 0x%08lx\n", env_addr);
 		return 1;
@@ -126,5 +124,3 @@ int env_init(void)
 
 	return 0;
 }
-
-#endif /* CFG_ENV_IS_IN_ONENAND */
diff --git a/common/env_sf.c b/common/env_sf.c
index 9077d783c..2f52e2561 100644
--- a/common/env_sf.c
+++ b/common/env_sf.c
@@ -26,23 +26,21 @@
  * MA 02111-1307 USA
  */
 #include <common.h>
-
-#ifdef CFG_ENV_IS_IN_SPI_FLASH
-
 #include <environment.h>
+#include <malloc.h>
 #include <spi_flash.h>
 
-#ifndef CFG_ENV_SPI_BUS
-# define CFG_ENV_SPI_BUS	0
+#ifndef CONFIG_ENV_SPI_BUS
+# define CONFIG_ENV_SPI_BUS	0
 #endif
-#ifndef CFG_ENV_SPI_CS
-# define CFG_ENV_SPI_CS		0
+#ifndef CONFIG_ENV_SPI_CS
+# define CONFIG_ENV_SPI_CS		0
 #endif
-#ifndef CFG_ENV_SPI_MAX_HZ
-# define CFG_ENV_SPI_MAX_HZ	1000000
+#ifndef CONFIG_ENV_SPI_MAX_HZ
+# define CONFIG_ENV_SPI_MAX_HZ	1000000
 #endif
-#ifndef CFG_ENV_SPI_MODE
-# define CFG_ENV_SPI_MODE	SPI_MODE_3
+#ifndef CONFIG_ENV_SPI_MODE
+# define CONFIG_ENV_SPI_MODE	SPI_MODE_3
 #endif
 
 DECLARE_GLOBAL_DATA_PTR;
@@ -63,41 +61,71 @@ uchar env_get_char_spec(int index)
 
 int saveenv(void)
 {
+	u32 saved_size, saved_offset;
+	char *saved_buffer = NULL;
 	u32 sector = 1;
+	int ret;
 
 	if (!env_flash) {
 		puts("Environment SPI flash not initialized\n");
 		return 1;
 	}
 
-	if (CFG_ENV_SIZE > CFG_ENV_SECT_SIZE) {
-		sector = CFG_ENV_SIZE / CFG_ENV_SECT_SIZE;
-		if (CFG_ENV_SIZE % CFG_ENV_SECT_SIZE)
+	/* Is the sector larger than the env (i.e. embedded) */
+	if (CONFIG_ENV_SECT_SIZE > CONFIG_ENV_SIZE) {
+		saved_size = CONFIG_ENV_SECT_SIZE - CONFIG_ENV_SIZE;
+		saved_offset = CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE;
+		saved_buffer = malloc(saved_size);
+		if (!saved_buffer) {
+			ret = 1;
+			goto done;
+		}
+		ret = spi_flash_read(env_flash, saved_offset, saved_size, saved_buffer);
+		if (ret)
+			goto done;
+	}
+
+	if (CONFIG_ENV_SIZE > CONFIG_ENV_SECT_SIZE) {
+		sector = CONFIG_ENV_SIZE / CONFIG_ENV_SECT_SIZE;
+		if (CONFIG_ENV_SIZE % CONFIG_ENV_SECT_SIZE)
 			sector++;
 	}
 
 	puts("Erasing SPI flash...");
-	if (spi_flash_erase(env_flash, CFG_ENV_OFFSET, sector * CFG_ENV_SECT_SIZE))
-		return 1;
+	ret = spi_flash_erase(env_flash, CONFIG_ENV_OFFSET, sector * CONFIG_ENV_SECT_SIZE);
+	if (ret)
+		goto done;
 
 	puts("Writing to SPI flash...");
-	if (spi_flash_write(env_flash, CFG_ENV_OFFSET, CFG_ENV_SIZE, env_ptr))
-		return 1;
+	ret = spi_flash_write(env_flash, CONFIG_ENV_OFFSET, CONFIG_ENV_SIZE, env_ptr);
+	if (ret)
+		goto done;
+
+	if (CONFIG_ENV_SECT_SIZE > CONFIG_ENV_SIZE) {
+		ret = spi_flash_write(env_flash, saved_offset, saved_size, saved_buffer);
+		if (ret)
+			goto done;
+	}
 
+	ret = 0;
 	puts("done\n");
-	return 0;
+
+ done:
+	if (saved_buffer)
+		free(saved_buffer);
+	return ret;
 }
 
 void env_relocate_spec(void)
 {
 	int ret;
 
-	env_flash = spi_flash_probe(CFG_ENV_SPI_BUS, CFG_ENV_SPI_CS,
-			CFG_ENV_SPI_MAX_HZ, CFG_ENV_SPI_MODE);
+	env_flash = spi_flash_probe(CONFIG_ENV_SPI_BUS, CONFIG_ENV_SPI_CS,
+			CONFIG_ENV_SPI_MAX_HZ, CONFIG_ENV_SPI_MODE);
 	if (!env_flash)
 		goto err_probe;
 
-	ret = spi_flash_read(env_flash, CFG_ENV_OFFSET, CFG_ENV_SIZE, env_ptr);
+	ret = spi_flash_read(env_flash, CONFIG_ENV_OFFSET, CONFIG_ENV_SIZE, env_ptr);
 	if (ret)
 		goto err_read;
 
@@ -115,7 +143,7 @@ err_probe:
 err_crc:
 	puts("*** Warning - bad CRC, using default environment\n\n");
 
-	if (default_environment_size > CFG_ENV_SIZE) {
+	if (default_environment_size > CONFIG_ENV_SIZE) {
 		gd->env_valid = 0;
 		puts("*** Error - default environment is too large\n\n");
 		return;
@@ -135,5 +163,3 @@ int env_init(void)
 
 	return 0;
 }
-
-#endif /* CFG_ENV_IS_IN_SPI_FLASH */
diff --git a/common/fdt_support.c b/common/fdt_support.c
index a7773aba0..5a83bca48 100644
--- a/common/fdt_support.c
+++ b/common/fdt_support.c
@@ -35,6 +35,33 @@
  */
 DECLARE_GLOBAL_DATA_PTR;
 
+/**
+ * fdt_getprop_u32_default - Find a node and return it's property or a default
+ *
+ * @fdt: ptr to device tree
+ * @path: path of node
+ * @prop: property name
+ * @dflt: default value if the property isn't found
+ *
+ * Convenience function to find a node and return it's property or a
+ * default value if it doesn't exist.
+ */
+u32 fdt_getprop_u32_default(void *fdt, const char *path, const char *prop,
+				const u32 dflt)
+{
+	const u32 *val;
+	int off;
+
+	off = fdt_path_offset(fdt, path);
+	if (off < 0)
+		return dflt;
+
+	val = fdt_getprop(fdt, off, prop, NULL);
+	if (val)
+		return *val;
+	else
+		return dflt;
+}
 
 /**
  * fdt_find_and_setprop: Find a node and set it's property
@@ -165,7 +192,7 @@ int fdt_initrd(void *fdt, ulong initrd_start, ulong initrd_end, int force)
 	return 0;
 }
 
-int fdt_chosen(void *fdt, ulong initrd_start, ulong initrd_end, int force)
+int fdt_chosen(void *fdt, int force)
 {
 	int   nodeoffset;
 	int   err;
@@ -215,8 +242,6 @@ int fdt_chosen(void *fdt, ulong initrd_start, ulong initrd_end, int force)
 		}
 	}
 
-	fdt_initrd(fdt, initrd_start, initrd_end, force);
-
 #ifdef CONFIG_OF_STDOUT_VIA_ALIAS
 	path = fdt_getprop(fdt, nodeoffset, "linux,stdout-path", NULL);
 	if ((path == NULL) || force)
@@ -577,9 +602,12 @@ int fdt_resize(void *blob)
 		}
 	}
 
-	/* Calculate the actual size of the fdt */
+	/*
+	 * Calculate the actual size of the fdt
+	 * plus the size needed for fdt_add_mem_rsv
+	 */
 	actualsize = fdt_off_dt_strings(blob) +
-		fdt_size_dt_strings(blob);
+		fdt_size_dt_strings(blob) + sizeof(struct fdt_reserve_entry);
 
 	/* Make it so the fdt ends on a page boundary */
 	actualsize = ALIGN(actualsize, 0x1000);
@@ -595,3 +623,72 @@ int fdt_resize(void *blob)
 
 	return actualsize;
 }
+
+#ifdef CONFIG_PCI
+#define CONFIG_SYS_PCI_NR_INBOUND_WIN 3
+
+#define FDT_PCI_PREFETCH	(0x40000000)
+#define FDT_PCI_MEM32		(0x02000000)
+#define FDT_PCI_IO		(0x01000000)
+#define FDT_PCI_MEM64		(0x03000000)
+
+int fdt_pci_dma_ranges(void *blob, int phb_off, struct pci_controller *hose) {
+
+	int addrcell, sizecell, len, r;
+	u32 *dma_range;
+	/* sized based on pci addr cells, size-cells, & address-cells */
+	u32 dma_ranges[(3 + 2 + 2) * CONFIG_SYS_PCI_NR_INBOUND_WIN];
+
+	addrcell = fdt_getprop_u32_default(blob, "/", "#address-cells", 1);
+	sizecell = fdt_getprop_u32_default(blob, "/", "#size-cells", 1);
+
+	dma_range = &dma_ranges[0];
+	for (r = 0; r < hose->region_count; r++) {
+		u64 bus_start, phys_start, size;
+
+		/* skip if !PCI_REGION_MEMORY */
+		if (!(hose->regions[r].flags & PCI_REGION_MEMORY))
+			continue;
+
+		bus_start = (u64)hose->regions[r].bus_start;
+		phys_start = (u64)hose->regions[r].phys_start;
+		size = (u64)hose->regions[r].size;
+
+		dma_range[0] = 0;
+		if (size > 0x100000000ull)
+			dma_range[0] |= FDT_PCI_MEM64;
+		else
+			dma_range[0] |= FDT_PCI_MEM32;
+		if (hose->regions[r].flags & PCI_REGION_PREFETCH)
+			dma_range[0] |= FDT_PCI_PREFETCH;
+#ifdef CONFIG_SYS_PCI_64BIT
+		dma_range[1] = bus_start >> 32;
+#else
+		dma_range[1] = 0;
+#endif
+		dma_range[2] = bus_start & 0xffffffff;
+
+		if (addrcell == 2) {
+			dma_range[3] = phys_start >> 32;
+			dma_range[4] = phys_start & 0xffffffff;
+		} else {
+			dma_range[3] = phys_start & 0xffffffff;
+		}
+
+		if (sizecell == 2) {
+			dma_range[3 + addrcell + 0] = size >> 32;
+			dma_range[3 + addrcell + 1] = size & 0xffffffff;
+		} else {
+			dma_range[3 + addrcell + 0] = size & 0xffffffff;
+		}
+
+		dma_range += (3 + addrcell + sizecell);
+	}
+
+	len = dma_range - &dma_ranges[0];
+	if (len)
+		fdt_setprop(blob, phb_off, "dma-ranges", &dma_ranges[0], len*4);
+
+	return 0;
+}
+#endif
diff --git a/common/flash.c b/common/flash.c
index fe39d55ef..eb4b2f5ff 100644
--- a/common/flash.c
+++ b/common/flash.c
@@ -26,7 +26,7 @@
 #include <common.h>
 #include <flash.h>
 
-#if !defined(CFG_NO_FLASH)
+#if !defined(CONFIG_SYS_NO_FLASH)
 
 extern flash_info_t  flash_info[]; /* info for FLASH chips */
 
@@ -75,19 +75,19 @@ flash_protect (int flag, ulong from, ulong to, flash_info_t *info)
 		 */
 		if (from <= end && to >= info->start[i]) {
 			if (flag & FLAG_PROTECT_CLEAR) {
-#if defined(CFG_FLASH_PROTECTION)
+#if defined(CONFIG_SYS_FLASH_PROTECTION)
 				flash_real_protect(info, i, 0);
 #else
 				info->protect[i] = 0;
-#endif	/* CFG_FLASH_PROTECTION */
+#endif	/* CONFIG_SYS_FLASH_PROTECTION */
 				debug ("protect off %d\n", i);
 			}
 			else if (flag & FLAG_PROTECT_SET) {
-#if defined(CFG_FLASH_PROTECTION)
+#if defined(CONFIG_SYS_FLASH_PROTECTION)
 				flash_real_protect(info, i, 1);
 #else
 				info->protect[i] = 1;
-#endif	/* CFG_FLASH_PROTECTION */
+#endif	/* CONFIG_SYS_FLASH_PROTECTION */
 				debug ("protect on %d\n", i);
 			}
 		}
@@ -104,7 +104,7 @@ addr2info (ulong addr)
 	flash_info_t *info;
 	int i;
 
-	for (i=0, info = &flash_info[0]; i<CFG_MAX_FLASH_BANKS; ++i, ++info) {
+	for (i=0, info = &flash_info[0]; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i, ++info) {
 		if (info->flash_id != FLASH_UNKNOWN &&
 		    addr >= info->start[0] &&
 		    /* WARNING - The '- 1' is needed if the flash
@@ -225,4 +225,4 @@ void flash_perror (int err)
 
 /*-----------------------------------------------------------------------
  */
-#endif /* !CFG_NO_FLASH */
+#endif /* !CONFIG_SYS_NO_FLASH */
diff --git a/common/hush.c b/common/hush.c
index 093c42804..9aef6e41d 100644
--- a/common/hush.c
+++ b/common/hush.c
@@ -96,7 +96,7 @@
 /*cmd_boot.c*/
 extern int do_bootd (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);      /* do_bootd */
 #endif
-#ifdef CFG_HUSH_PARSER
+#ifdef CONFIG_SYS_HUSH_PARSER
 #ifndef __U_BOOT__
 #include <ctype.h>     /* isalpha, isdigit */
 #include <unistd.h>    /* getpid */
@@ -501,10 +501,6 @@ static void remove_bg_job(struct pipe *pi);
 static char **make_list_in(char **inp, char *name);
 static char *insert_var_value(char *inp);
 static char *get_local_var(const char *var);
-#ifndef __U_BOOT__
-static void  unset_local_var(const char *name);
-#endif
-static int set_local_var(const char *s, int flg_export);
 
 #ifndef __U_BOOT__
 /* Table of built-in functions.  They can be forked or not, depending on
@@ -1023,9 +1019,9 @@ static void get_user_input(struct in_str *i)
 	fflush(stdout);
 	i->p = the_command;
 #else
-	extern char console_buffer[CFG_CBSIZE];
+	extern char console_buffer[CONFIG_SYS_CBSIZE];
 	int n;
-	static char the_command[CFG_CBSIZE];
+	static char the_command[CONFIG_SYS_CBSIZE];
 
 #ifdef CONFIG_BOOT_RETRY_TIME
 #  ifdef CONFIG_RESET_TO_RETRY
@@ -1037,9 +1033,9 @@ static void get_user_input(struct in_str *i)
 #endif
 	i->__promptme = 1;
 	if (i->promptmode == 1) {
-		n = readline(CFG_PROMPT);
+		n = readline(CONFIG_SYS_PROMPT);
 	} else {
-		n = readline(CFG_PROMPT_HUSH_PS2);
+		n = readline(CONFIG_SYS_PROMPT_HUSH_PS2);
 	}
 #ifdef CONFIG_BOOT_RETRY_TIME
 	if (n == -2) {
@@ -1079,7 +1075,7 @@ static void get_user_input(struct in_str *i)
 	else {
 		if (console_buffer[0] != '\n') {
 			if (strlen(the_command) + strlen(console_buffer)
-			    < CFG_CBSIZE) {
+			    < CONFIG_SYS_CBSIZE) {
 				n = strlen(the_command);
 				the_command[n-1] = ' ';
 				strcpy(&the_command[n],console_buffer);
@@ -2204,7 +2200,7 @@ static char *get_local_var(const char *s)
    flg_export==0 if only local (not exporting) variable
    flg_export==1 if "new" exporting environ
    flg_export>1  if current startup environ (not call putenv()) */
-static int set_local_var(const char *s, int flg_export)
+int set_local_var(const char *s, int flg_export)
 {
 	char *name, *value;
 	int result=0;
@@ -2295,8 +2291,7 @@ static int set_local_var(const char *s, int flg_export)
 	return result;
 }
 
-#ifndef __U_BOOT__
-static void unset_local_var(const char *name)
+void unset_local_var(const char *name)
 {
 	struct variables *cur;
 
@@ -2311,8 +2306,10 @@ static void unset_local_var(const char *name)
 				error_msg("%s: readonly variable", name);
 				return;
 			} else {
+#ifndef __U_BOOT__
 				if(cur->flg_export)
 					unsetenv(cur->name);
+#endif
 				free(cur->name);
 				free(cur->value);
 				while (next->next != cur)
@@ -2323,7 +2320,6 @@ static void unset_local_var(const char *name)
 		}
 	}
 }
-#endif
 
 static int is_assignment(const char *s)
 {
@@ -3588,5 +3584,53 @@ static char * make_string(char ** inp)
 	return str;
 }
 
-#endif /* CFG_HUSH_PARSER */
+#ifdef __U_BOOT__
+int do_showvar (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+	int i, k;
+	int rcode = 0;
+	struct variables *cur;
+
+	if (argc == 1) {		/* Print all env variables	*/
+		for (cur = top_vars; cur; cur = cur->next) {
+			printf ("%s=%s\n", cur->name, cur->value);
+			if (ctrlc ()) {
+				puts ("\n ** Abort\n");
+				return 1;
+			}
+		}
+		return 0;
+	}
+	for (i = 1; i < argc; ++i) {	/* print single env variables	*/
+		char *name = argv[i];
+
+		k = -1;
+		for (cur = top_vars; cur; cur = cur->next) {
+			if(strcmp (cur->name, name) == 0) {
+				k = 0;
+				printf ("%s=%s\n", cur->name, cur->value);
+			}
+			if (ctrlc ()) {
+				puts ("\n ** Abort\n");
+				return 1;
+			}
+		}
+		if (k < 0) {
+			printf ("## Error: \"%s\" not defined\n", name);
+			rcode ++;
+		}
+	}
+	return rcode;
+}
+
+U_BOOT_CMD(
+	showvar, CONFIG_SYS_MAXARGS, 1,	do_showvar,
+	"showvar- print local hushshell variables\n",
+	"\n    - print values of all hushshell variables\n"
+	"showvar name ...\n"
+	"    - print value of hushshell variable 'name'\n"
+);
+
+#endif
+#endif /* CONFIG_SYS_HUSH_PARSER */
 /****************************************************************************/
diff --git a/common/image.c b/common/image.c
index 55c4ccec8..daa68bc2d 100644
--- a/common/image.c
+++ b/common/image.c
@@ -105,9 +105,6 @@ static table_entry_t uimage_arch[] = {
 
 static table_entry_t uimage_os[] = {
 	{	IH_OS_INVALID,	NULL,		"Invalid OS",		},
-#if defined(CONFIG_ARTOS) || defined(USE_HOSTCC)
-	{	IH_OS_ARTOS,	"artos",	"ARTOS",		},
-#endif
 	{	IH_OS_LINUX,	"linux",	"Linux",		},
 #if defined(CONFIG_LYNXKDI) || defined(USE_HOSTCC)
 	{	IH_OS_LYNXOS,	"lynxos",	"LynxOS",		},
@@ -119,6 +116,9 @@ static table_entry_t uimage_os[] = {
 	{	IH_OS_QNX,	"qnx",		"QNX",			},
 	{	IH_OS_VXWORKS,	"vxworks",	"VxWorks",		},
 #endif
+#if defined(CONFIG_INTEGRITY) || defined(USE_HOSTCC)
+	{	IH_OS_INTEGRITY,"integrity",	"INTEGRITY",		},
+#endif
 #ifdef USE_HOSTCC
 	{	IH_OS_4_4BSD,	"4_4bsd",	"4_4BSD",		},
 	{	IH_OS_DELL,	"dell",		"Dell",			},
@@ -152,6 +152,7 @@ static table_entry_t uimage_comp[] = {
 	{	IH_COMP_NONE,	"none",		"uncompressed",		},
 	{	IH_COMP_BZIP2,	"bzip2",	"bzip2 compressed",	},
 	{	IH_COMP_GZIP,	"gzip",		"gzip compressed",	},
+	{	IH_COMP_LZMA,	"lzma",		"lzma compressed",	},
 	{	-1,		"",		"",			},
 };
 
@@ -425,8 +426,8 @@ ulong getenv_bootm_low(void)
 		return tmp;
 	}
 
-#if defined(CFG_SDRAM_BASE)
-	return CFG_SDRAM_BASE;
+#if defined(CONFIG_SYS_SDRAM_BASE)
+	return CONFIG_SYS_SDRAM_BASE;
 #elif defined(CONFIG_ARM)
 	return gd->bd->bi_dram[0].start;
 #else
@@ -439,7 +440,7 @@ phys_size_t getenv_bootm_size(void)
 	char *s = getenv ("bootm_size");
 	if (s) {
 		phys_size_t tmp;
-#ifdef CFG_64BIT_STRTOUL
+#ifdef CONFIG_SYS_64BIT_STRTOUL
 		tmp = (phys_size_t)simple_strtoull (s, NULL, 16);
 #else
 		tmp = (phys_size_t)simple_strtoul (s, NULL, 16);
@@ -662,7 +663,7 @@ ulong genimg_get_image (ulong img_addr)
 
 	if (addr_dataflash (img_addr)){
 		/* ger RAM address */
-		ram_addr = CFG_LOAD_ADDR;
+		ram_addr = CONFIG_SYS_LOAD_ADDR;
 
 		/* get header size */
 		h_size = image_get_header_size ();
@@ -749,7 +750,7 @@ int genimg_has_config (bootm_headers_t *images)
  *     rd_start and rd_end are set to ramdisk start/end addresses if
  *     ramdisk image is found and valid
  *
- *     1, if ramdisk image is found but corrupted
+ *     1, if ramdisk image is found but corrupted, or invalid
  *     rd_start and rd_end are set to 0 if no ramdisk exists
  */
 int boot_get_ramdisk (int argc, char *argv[], bootm_headers_t *images,
@@ -936,6 +937,7 @@ int boot_get_ramdisk (int argc, char *argv[], bootm_headers_t *images,
 		default:
 			puts ("Wrong Ramdisk Image Format\n");
 			rd_data = rd_len = rd_load = 0;
+			return 1;
 		}
 
 #if defined(CONFIG_B2) || defined(CONFIG_EVB4510) || defined(CONFIG_ARMADILLO)
@@ -1069,6 +1071,7 @@ int boot_ramdisk_high (struct lmb *lmb, ulong rd_data, ulong rd_len,
 error:
 	return -1;
 }
+#endif /* defined(CONFIG_PPC) || defined(CONFIG_M68K) || defined(CONFIG_SPARC) */
 
 #ifdef CONFIG_OF_LIBFDT
 static void fdt_error (const char *msg)
@@ -1152,8 +1155,8 @@ static int fit_check_fdt (const void *fit, int fdt_noffset, int verify)
 }
 #endif /* CONFIG_FIT */
 
-#ifndef CFG_FDT_PAD
-#define CFG_FDT_PAD 0x3000
+#ifndef CONFIG_SYS_FDT_PAD
+#define CONFIG_SYS_FDT_PAD 0x3000
 #endif
 
 /**
@@ -1188,7 +1191,7 @@ int boot_relocate_fdt (struct lmb *lmb, ulong bootmap_base,
 		goto error;
 	}
 
-#ifndef CFG_NO_FLASH
+#ifndef CONFIG_SYS_NO_FLASH
 	/* move the blob if it is in flash (set relocate) */
 	if (addr2info ((ulong)fdt_blob) != NULL)
 		relocate = 1;
@@ -1200,8 +1203,8 @@ int boot_relocate_fdt (struct lmb *lmb, ulong bootmap_base,
 	if (fdt_blob < (char *)bootmap_base)
 		relocate = 1;
 
-	if ((fdt_blob + *of_size + CFG_FDT_PAD) >=
-			((char *)CFG_BOOTMAPSZ + bootmap_base))
+	if ((fdt_blob + *of_size + CONFIG_SYS_FDT_PAD) >=
+			((char *)CONFIG_SYS_BOOTMAPSZ + bootmap_base))
 		relocate = 1;
 
 	/* move flattend device tree if needed */
@@ -1211,9 +1214,9 @@ int boot_relocate_fdt (struct lmb *lmb, ulong bootmap_base,
 
 		/* position on a 4K boundary before the alloc_current */
 		/* Pad the FDT by a specified amount */
-		of_len = *of_size + CFG_FDT_PAD;
+		of_len = *of_size + CONFIG_SYS_FDT_PAD;
 		of_start = (unsigned long)lmb_alloc_base(lmb, of_len, 0x1000,
-				(CFG_BOOTMAPSZ + bootmap_base));
+				(CONFIG_SYS_BOOTMAPSZ + bootmap_base));
 
 		if (of_start == 0) {
 			puts("device tree - allocation error\n");
@@ -1238,7 +1241,7 @@ int boot_relocate_fdt (struct lmb *lmb, ulong bootmap_base,
 		*of_size = of_len;
 	} else {
 		*of_flat_tree = fdt_blob;
-		of_len = (CFG_BOOTMAPSZ + bootmap_base) - (ulong)fdt_blob;
+		of_len = (CONFIG_SYS_BOOTMAPSZ + bootmap_base) - (ulong)fdt_blob;
 		lmb_reserve(lmb, (ulong)fdt_blob, of_len);
 		fdt_set_totalsize(*of_flat_tree, of_len);
 
@@ -1516,7 +1519,7 @@ int boot_get_fdt (int flag, int argc, char *argv[], bootm_headers_t *images,
 			}
 			break;
 		default:
-			fdt_error ("Did not find a cmdline Flattened Device Tree");
+			puts ("ERROR: Did not find a cmdline Flattened Device Tree\n");
 			goto error;
 		}
 
@@ -1562,7 +1565,7 @@ int boot_get_fdt (int flag, int argc, char *argv[], bootm_headers_t *images,
 	*of_flat_tree = fdt_blob;
 	*of_size = be32_to_cpu (fdt_totalsize (fdt_blob));
 	debug ("   of_flat_tree at 0x%08lx size 0x%08lx\n",
-			*of_flat_tree, *of_size);
+			(ulong)*of_flat_tree, *of_size);
 
 	return 0;
 
@@ -1573,6 +1576,7 @@ error:
 }
 #endif /* CONFIG_OF_LIBFDT */
 
+#if defined(CONFIG_PPC) || defined(CONFIG_M68K)
 /**
  * boot_get_cmdline - allocate and initialize kernel cmdline
  * @lmb: pointer to lmb handle, will be used for memory mgmt
@@ -1596,8 +1600,8 @@ int boot_get_cmdline (struct lmb *lmb, ulong *cmd_start, ulong *cmd_end,
 	char *cmdline;
 	char *s;
 
-	cmdline = (char *)(ulong)lmb_alloc_base(lmb, CFG_BARGSIZE, 0xf,
-					 CFG_BOOTMAPSZ + bootmap_base);
+	cmdline = (char *)(ulong)lmb_alloc_base(lmb, CONFIG_SYS_BARGSIZE, 0xf,
+					 CONFIG_SYS_BOOTMAPSZ + bootmap_base);
 
 	if (cmdline == NULL)
 		return -1;
@@ -1633,7 +1637,7 @@ int boot_get_cmdline (struct lmb *lmb, ulong *cmd_start, ulong *cmd_end,
 int boot_get_kbd (struct lmb *lmb, bd_t **kbd, ulong bootmap_base)
 {
 	*kbd = (bd_t *)(ulong)lmb_alloc_base(lmb, sizeof(bd_t), 0xf,
-				      CFG_BOOTMAPSZ + bootmap_base);
+				      CONFIG_SYS_BOOTMAPSZ + bootmap_base);
 	if (*kbd == NULL)
 		return -1;
 
@@ -1850,7 +1854,10 @@ void fit_print_contents (const void *fit)
  * @p: pointer to prefix string
  *
  * fit_image_print() lists all mandatory properies for the processed component
- * image. If present, hash nodes are printed out as well.
+ * image. If present, hash nodes are printed out as well. Load
+ * address for images of type firmware is also printed out. Since the load
+ * address is not mandatory for firmware images, it will be output as
+ * "unavailable" when not present.
  *
  * returns:
  *     no returned results
@@ -1909,14 +1916,17 @@ void fit_image_print (const void *fit, int image_noffset, const char *p)
 		printf ("%s  OS:           %s\n", p, genimg_get_os_name (os));
 	}
 
-	if ((type == IH_TYPE_KERNEL) || (type == IH_TYPE_STANDALONE)) {
+	if ((type == IH_TYPE_KERNEL) || (type == IH_TYPE_STANDALONE) ||
+		(type == IH_TYPE_FIRMWARE)) {
 		ret = fit_image_get_load (fit, image_noffset, &load);
 		printf ("%s  Load Address: ", p);
 		if (ret)
 			printf ("unavailable\n");
 		else
 			printf ("0x%08lx\n", load);
+	}
 
+	if ((type == IH_TYPE_KERNEL) || (type == IH_TYPE_STANDALONE)) {
 		fit_image_get_entry (fit, image_noffset, &entry);
 		printf ("%s  Entry Point:  ", p);
 		if (ret)
@@ -2644,27 +2654,29 @@ int fit_image_check_hashes (const void *fit, int image_noffset)
 				continue;
 
 			if (fit_image_hash_get_algo (fit, noffset, &algo)) {
-				err_msg = "Can't get hash algo property";
+				err_msg = " error!\nCan't get hash algo "
+						"property";
 				goto error;
 			}
 			printf ("%s", algo);
 
 			if (fit_image_hash_get_value (fit, noffset, &fit_value,
 							&fit_value_len)) {
-				err_msg = "Can't get hash value property";
+				err_msg = " error!\nCan't get hash value "
+						"property";
 				goto error;
 			}
 
 			if (calculate_hash (data, size, algo, value, &value_len)) {
-				err_msg = "Unsupported hash algorithm";
+				err_msg = " error!\nUnsupported hash algorithm";
 				goto error;
 			}
 
 			if (value_len != fit_value_len) {
-				err_msg = "Bad hash value len";
+				err_msg = " error !\nBad hash value len";
 				goto error;
 			} else if (memcmp (value, fit_value, value_len) != 0) {
-				err_msg = "Bad hash value";
+				err_msg = " error!\nBad hash value";
 				goto error;
 			}
 			printf ("+ ");
@@ -2681,6 +2693,55 @@ error:
 }
 
 /**
+ * fit_all_image_check_hashes - verify data intergity for all images
+ * @fit: pointer to the FIT format image header
+ *
+ * fit_all_image_check_hashes() goes over all images in the FIT and
+ * for every images checks if all it's hashes are valid.
+ *
+ * returns:
+ *     1, if all hashes of all images are valid
+ *     0, otherwise (or on error)
+ */
+int fit_all_image_check_hashes (const void *fit)
+{
+	int images_noffset;
+	int noffset;
+	int ndepth;
+	int count;
+
+	/* Find images parent node offset */
+	images_noffset = fdt_path_offset (fit, FIT_IMAGES_PATH);
+	if (images_noffset < 0) {
+		printf ("Can't find images parent node '%s' (%s)\n",
+			FIT_IMAGES_PATH, fdt_strerror (images_noffset));
+		return 0;
+	}
+
+	/* Process all image subnodes, check hashes for each */
+	printf ("## Checking hash(es) for FIT Image at %08lx ...\n",
+		(ulong)fit);
+	for (ndepth = 0, count = 0,
+		noffset = fdt_next_node (fit, images_noffset, &ndepth);
+		(noffset >= 0) && (ndepth > 0);
+		noffset = fdt_next_node (fit, noffset, &ndepth)) {
+		if (ndepth == 1) {
+			/*
+			 * Direct child node of the images parent node,
+			 * i.e. component image node.
+			 */
+			printf ("   Hash(es) for Image %u (%s): ", count++,
+					fit_get_name (fit, noffset, NULL));
+
+			if (!fit_image_check_hashes (fit, noffset))
+				return 0;
+			printf ("\n");
+		}
+	}
+	return 1;
+}
+
+/**
  * fit_image_check_os - check whether image node is of a given os type
  * @fit: pointer to the FIT format image header
  * @noffset: component image node offset
@@ -2791,7 +2852,7 @@ int fit_check_format (const void *fit)
 #if defined(CONFIG_TIMESTAMP) || defined(CONFIG_CMD_DATE) || defined(USE_HOSTCC)
 	/* mandatory / node 'timestamp' property */
 	if (fdt_getprop (fit, 0, FIT_TIMESTAMP_PROP, NULL) == NULL) {
-		debug ("Wrong FIT format: no description\n");
+		debug ("Wrong FIT format: no timestamp\n");
 		return 0;
 	}
 #endif
diff --git a/common/iomux.c b/common/iomux.c
new file mode 100644
index 000000000..bdcc853ff
--- /dev/null
+++ b/common/iomux.c
@@ -0,0 +1,175 @@
+/*
+ * (C) Copyright 2008
+ * Gary Jennejohn, DENX Software Engineering GmbH, garyj@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <serial.h>
+#include <malloc.h>
+
+#ifdef CONFIG_CONSOLE_MUX
+void iomux_printdevs(const int console)
+{
+	int i;
+	device_t *dev;
+
+	for (i = 0; i < cd_count[console]; i++) {
+		dev = console_devices[console][i];
+		printf("%s ", dev->name);
+	}
+	printf("\n");
+}
+
+/* This tries to preserve the old list if an error occurs. */
+int iomux_doenv(const int console, const char *arg)
+{
+	char *console_args, *temp, **start;
+	int i, j, k, io_flag, cs_idx, repeat;
+	device_t *dev;
+	device_t **cons_set;
+
+	console_args = strdup(arg);
+	if (console_args == NULL)
+		return 1;
+	/*
+	 * Check whether a comma separated list of devices was
+	 * entered and count how many devices were entered.
+	 * The array start[] has pointers to the beginning of
+	 * each device name (up to MAX_CONSARGS devices).
+	 *
+	 * Have to do this twice - once to count the number of
+	 * commas and then again to populate start.
+	 */
+	i = 0;
+	temp = console_args;
+	for (;;) {
+		temp = strchr(temp, ',');
+		if (temp != NULL) {
+			i++;
+			temp++;
+			continue;
+		}
+		/* There's always one entry more than the number of commas. */
+		i++;
+		break;
+	}
+	start = (char **)malloc(i * sizeof(char *));
+	if (start == NULL) {
+		free(console_args);
+		return 1;
+	}
+	i = 0;
+	start[0] = console_args;
+	for (;;) {
+		temp = strchr(start[i++], ',');
+		if (temp == NULL)
+			break;
+		*temp = '\0';
+		start[i] = temp + 1;
+	}
+	cons_set = (device_t **)calloc(i, sizeof(device_t *));
+	if (cons_set == NULL) {
+		free(start);
+		free(console_args);
+		return 1;
+	}
+
+	switch (console) {
+	case stdin:
+		io_flag = DEV_FLAGS_INPUT;
+		break;
+	case stdout:
+	case stderr:
+		io_flag = DEV_FLAGS_OUTPUT;
+		break;
+	default:
+		free(start);
+		free(console_args);
+		free(cons_set);
+		return 1;
+	}
+
+	cs_idx = 0;
+	for (j = 0; j < i; j++) {
+		/*
+		 * Check whether the device exists and is valid.
+		 * console_assign() also calls search_device(),
+		 * but I need the pointer to the device.
+		 */
+		dev = search_device(io_flag, start[j]);
+		if (dev == NULL)
+			continue;
+		/*
+		 * Prevent multiple entries for a device.
+		 */
+		 repeat = 0;
+		 for (k = 0; k < cs_idx; k++) {
+			if (dev == cons_set[k]) {
+				repeat++;
+				break;
+			}
+		 }
+		 if (repeat)
+			continue;
+		/*
+		 * Try assigning the specified device.
+		 * This could screw up the console settings for apps.
+		 */
+		if (console_assign(console, start[j]) < 0)
+			continue;
+#ifdef CONFIG_SERIAL_MULTI
+		/*
+		 * This was taken from common/cmd_nvedit.c.
+		 * This will never work because serial_assign() returns
+		 * 1 upon error, not -1.
+		 * This would almost always return an error anyway because
+		 * serial_assign() expects the name of a serial device, like
+		 * serial_smc, but the user generally only wants to set serial.
+		 */
+		if (serial_assign(start[j]) < 0)
+			continue;
+#endif
+		cons_set[cs_idx++] = dev;
+	}
+	free(console_args);
+	free(start);
+	/* failed to set any console */
+	if (cs_idx == 0) {
+		free(cons_set);
+		return 1;
+	} else {
+		/* Works even if console_devices[console] is NULL. */
+		console_devices[console] =
+			(device_t **)realloc(console_devices[console],
+			cs_idx * sizeof(device_t *));
+		if (console_devices[console] == NULL) {
+			free(cons_set);
+			return 1;
+		}
+		memcpy(console_devices[console], cons_set, cs_idx *
+			sizeof(device_t *));
+
+		cd_count[console] = cs_idx;
+	}
+	free(cons_set);
+	return 0;
+}
+#endif /* CONFIG_CONSOLE_MUX */
diff --git a/common/kgdb.c b/common/kgdb.c
index b14898be9..adc15dd79 100644
--- a/common/kgdb.c
+++ b/common/kgdb.c
@@ -574,7 +574,7 @@ do_kgdb(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 }
 
 U_BOOT_CMD(
-	kgdb, CFG_MAXARGS, 1,	do_kgdb,
+	kgdb, CONFIG_SYS_MAXARGS, 1,	do_kgdb,
 	"kgdb    - enter gdb remote debug mode\n",
 	"[arg0 arg1 .. argN]\n"
 	"    - executes a breakpoint so that kgdb mode is\n"
diff --git a/common/lcd.c b/common/lcd.c
index 25f866434..ae79051d1 100644
--- a/common/lcd.c
+++ b/common/lcd.c
@@ -32,7 +32,6 @@
 #include <config.h>
 #include <common.h>
 #include <command.h>
-#include <version.h>
 #include <stdarg.h>
 #include <linux/types.h>
 #include <devices.h>
@@ -52,7 +51,6 @@
 
 #if defined(CONFIG_ATMEL_LCD)
 #include <atmel_lcdc.h>
-#include <nand.h>
 #endif
 
 /************************************************************************/
@@ -225,6 +223,20 @@ void lcd_puts (const char *s)
 	}
 }
 
+/*----------------------------------------------------------------------*/
+
+void lcd_printf(const char *fmt, ...)
+{
+	va_list args;
+	char buf[CONFIG_SYS_PBSIZE];
+
+	va_start(args, fmt);
+	vsprintf(buf, fmt, args);
+	va_end(args);
+
+	lcd_puts(buf);
+}
+
 /************************************************************************/
 /* ** Low-Level Graphics Routines					*/
 /************************************************************************/
@@ -386,13 +398,13 @@ static int lcd_clear (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
 	lcd_setcolreg  (CONSOLE_COLOR_WHITE,	0xFF, 0xFF, 0xFF);
 #endif
 
-#ifndef CFG_WHITE_ON_BLACK
+#ifndef CONFIG_SYS_WHITE_ON_BLACK
 	lcd_setfgcolor (CONSOLE_COLOR_BLACK);
 	lcd_setbgcolor (CONSOLE_COLOR_WHITE);
 #else
 	lcd_setfgcolor (CONSOLE_COLOR_WHITE);
 	lcd_setbgcolor (CONSOLE_COLOR_BLACK);
-#endif	/* CFG_WHITE_ON_BLACK */
+#endif	/* CONFIG_SYS_WHITE_ON_BLACK */
 
 #ifdef	LCD_TEST_PATTERN
 	test_pattern();
@@ -426,6 +438,7 @@ static int lcd_init (void *lcdbase)
 	debug ("[LCD] Initializing LCD frambuffer at %p\n", lcdbase);
 
 	lcd_ctrl_init (lcdbase);
+	lcd_is_enabled = 1;
 	lcd_clear (NULL, 1, 1, NULL);	/* dummy args */
 	lcd_enable ();
 
@@ -436,7 +449,6 @@ static int lcd_init (void *lcdbase)
 #else
 	console_row = 1;	/* leave 1 blank line below logo */
 #endif
-	lcd_is_enabled = 1;
 
 	return 0;
 }
@@ -531,7 +543,7 @@ void bitmap_plot (int x, int y)
 #if defined(CONFIG_PXA250)
 	struct pxafb_info *fbi = &panel_info.pxa;
 #elif defined(CONFIG_MPC823)
-	volatile immap_t *immr = (immap_t *) CFG_IMMR;
+	volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
 	volatile cpm8xx_t *cp = &(immr->im_cpm);
 #endif
 
@@ -571,7 +583,7 @@ void bitmap_plot (int x, int y)
 			*(cmap + BMP_LOGO_OFFSET) = lut_entry;
 			cmap++;
 #else /* !CONFIG_ATMEL_LCD */
-#ifdef  CFG_INVERT_COLORS
+#ifdef  CONFIG_SYS_INVERT_COLORS
 			*cmap++ = 0xffff - colreg;
 #else
 			*cmap++ = colreg;
@@ -627,7 +639,7 @@ int lcd_display_bitmap(ulong bmp_image, int x, int y)
 #if defined(CONFIG_PXA250)
 	struct pxafb_info *fbi = &panel_info.pxa;
 #elif defined(CONFIG_MPC823)
-	volatile immap_t *immr = (immap_t *) CFG_IMMR;
+	volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
 	volatile cpm8xx_t *cp = &(immr->im_cpm);
 #endif
 
@@ -681,7 +693,7 @@ int lcd_display_bitmap(ulong bmp_image, int x, int y)
 				( ((cte.red)   << 8) & 0xf800) |
 				( ((cte.green) << 3) & 0x07e0) |
 				( ((cte.blue)  >> 3) & 0x001f) ;
-#ifdef CFG_INVERT_COLORS
+#ifdef CONFIG_SYS_INVERT_COLORS
 			*cmap = 0xffff - colreg;
 #else
 			*cmap = colreg;
@@ -748,15 +760,6 @@ extern bmp_image_t *gunzip_bmp(unsigned long addr, unsigned long *lenp);
 
 static void *lcd_logo (void)
 {
-#ifdef CONFIG_LCD_INFO
-	char info[80];
-	char temp[32];
-#ifdef CONFIG_ATMEL_LCD
-	int i;
-	ulong dram_size, nand_size;
-#endif
-#endif /* CONFIG_LCD_INFO */
-
 #ifdef CONFIG_SPLASH_SCREEN
 	char *s;
 	ulong addr;
@@ -786,75 +789,11 @@ static void *lcd_logo (void)
 	bitmap_plot (0, 0);
 #endif /* CONFIG_LCD_LOGO */
 
-#ifdef CONFIG_MPC823
-# ifdef CONFIG_LCD_INFO
-	sprintf (info, "%s (%s - %s) ", U_BOOT_VERSION, __DATE__, __TIME__);
-	lcd_drawchars (LCD_INFO_X, LCD_INFO_Y, (uchar *)info, strlen(info));
-
-	sprintf (info, "(C) 2008 DENX Software Engineering GmbH");
-	lcd_drawchars (LCD_INFO_X, LCD_INFO_Y + VIDEO_FONT_HEIGHT,
-					(uchar *)info, strlen(info));
-
-	sprintf (info, "    Wolfgang DENK, wd@denx.de");
-	lcd_drawchars (LCD_INFO_X, LCD_INFO_Y + VIDEO_FONT_HEIGHT * 2,
-					(uchar *)info, strlen(info));
-#  ifdef CONFIG_LCD_INFO_BELOW_LOGO
-	sprintf (info, "MPC823 CPU at %s MHz",
-		strmhz(temp, gd->cpu_clk));
-	lcd_drawchars (LCD_INFO_X, LCD_INFO_Y + VIDEO_FONT_HEIGHT * 3,
-					info, strlen(info));
-	sprintf (info, "  %ld MB RAM, %ld MB Flash",
-		gd->ram_size >> 20,
-		gd->bd->bi_flashsize >> 20 );
-	lcd_drawchars (LCD_INFO_X, LCD_INFO_Y + VIDEO_FONT_HEIGHT * 4,
-					info, strlen(info));
-#  else
-	/* leave one blank line */
-
-	sprintf (info, "MPC823 CPU at %s MHz, %ld MB RAM, %ld MB Flash",
-		strmhz(temp, gd->cpu_clk),
-		gd->ram_size >> 20,
-		gd->bd->bi_flashsize >> 20 );
-	lcd_drawchars (LCD_INFO_X, LCD_INFO_Y + VIDEO_FONT_HEIGHT * 4,
-					(uchar *)info, strlen(info));
-
-#  endif /* CONFIG_LCD_INFO_BELOW_LOGO */
-# endif /* CONFIG_LCD_INFO */
-#endif /* CONFIG_MPC823 */
-
-#ifdef CONFIG_ATMEL_LCD
-# ifdef CONFIG_LCD_INFO
-	sprintf (info, "%s", U_BOOT_VERSION);
-	lcd_drawchars (LCD_INFO_X, LCD_INFO_Y, (uchar *)info, strlen(info));
-
-	sprintf (info, "(C) 2008 ATMEL Corp");
-	lcd_drawchars (LCD_INFO_X, LCD_INFO_Y + VIDEO_FONT_HEIGHT,
-					(uchar *)info, strlen(info));
-
-	sprintf (info, "at91support@atmel.com");
-	lcd_drawchars (LCD_INFO_X, LCD_INFO_Y + VIDEO_FONT_HEIGHT * 2,
-					(uchar *)info, strlen(info));
-
-	sprintf (info, "%s CPU at %s MHz",
-		AT91_CPU_NAME,
-		strmhz(temp, AT91_MAIN_CLOCK));
-	lcd_drawchars (LCD_INFO_X, LCD_INFO_Y + VIDEO_FONT_HEIGHT * 3,
-					(uchar *)info, strlen(info));
-
-	dram_size = 0;
-	for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++)
-		dram_size += gd->bd->bi_dram[i].size;
-	nand_size = 0;
-	for (i = 0; i < CFG_MAX_NAND_DEVICE; i++)
-		nand_size += nand_info[i].size;
-	sprintf (info, "  %ld MB SDRAM, %ld MB NAND",
-		dram_size >> 20,
-		nand_size >> 20 );
-	lcd_drawchars (LCD_INFO_X, LCD_INFO_Y + VIDEO_FONT_HEIGHT * 4,
-					(uchar *)info, strlen(info));
-# endif /* CONFIG_LCD_INFO */
-#endif /* CONFIG_ATMEL_LCD */
-
+#ifdef CONFIG_LCD_INFO
+	console_col = LCD_INFO_X / VIDEO_FONT_WIDTH;
+	console_row = LCD_INFO_Y / VIDEO_FONT_HEIGHT;
+	lcd_show_board_info();
+#endif /* CONFIG_LCD_INFO */
 
 #if defined(CONFIG_LCD_LOGO) && !defined(CONFIG_LCD_INFO_BELOW_LOGO)
 	return ((void *)((ulong)lcd_base + BMP_LOGO_HEIGHT * lcd_line_length));
diff --git a/common/main.c b/common/main.c
index 187ef8a3a..a999a5d64 100644
--- a/common/main.c
+++ b/common/main.c
@@ -34,7 +34,7 @@
 #include <malloc.h>		/* for free() prototype */
 #endif
 
-#ifdef CFG_HUSH_PARSER
+#ifdef CONFIG_SYS_HUSH_PARSER
 #include <hush.h>
 #endif
 
@@ -56,6 +56,9 @@ extern int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);		/* fo
 
 extern int do_bootd (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
 
+#if defined(CONFIG_UPDATE_TFTP)
+void update_tftp (void);
+#endif /* CONFIG_UPDATE_TFTP */
 
 #define MAX_DELAY_STOP_STR 32
 
@@ -65,7 +68,7 @@ static int abortboot(int);
 
 #undef DEBUG_PARSER
 
-char        console_buffer[CFG_CBSIZE];		/* console I/O buffer	*/
+char        console_buffer[CONFIG_SYS_CBSIZE];		/* console I/O buffer	*/
 
 static char * delete_char (char *buffer, char *p, int *colp, int *np, int plen);
 static char erase_seq[] = "\b \b";		/* erase sequence	*/
@@ -269,8 +272,8 @@ static __inline__ int abortboot(int bootdelay)
 
 void main_loop (void)
 {
-#ifndef CFG_HUSH_PARSER
-	static char lastcommand[CFG_CBSIZE] = { 0, };
+#ifndef CONFIG_SYS_HUSH_PARSER
+	static char lastcommand[CONFIG_SYS_CBSIZE] = { 0, };
 	int len;
 	int rc = 1;
 	int flag;
@@ -301,6 +304,10 @@ void main_loop (void)
 	trab_vfd (bmp);
 #endif	/* CONFIG_VFD && VFD_TEST_LOGO */
 
+#if defined(CONFIG_UPDATE_TFTP)
+	update_tftp ();
+#endif /* CONFIG_UPDATE_TFTP */
+
 #ifdef CONFIG_BOOTCOUNT_LIMIT
 	bootcount = bootcount_load();
 	bootcount++;
@@ -330,10 +337,14 @@ void main_loop (void)
 	}
 #endif /* CONFIG_VERSION_VARIABLE */
 
-#ifdef CFG_HUSH_PARSER
+#ifdef CONFIG_SYS_HUSH_PARSER
 	u_boot_hush_start ();
 #endif
 
+#if defined(CONFIG_HUSH_INIT_VAR)
+	hush_init_var ();
+#endif
+
 #ifdef CONFIG_AUTO_COMPLETE
 	install_auto_complete();
 #endif
@@ -344,7 +355,7 @@ void main_loop (void)
 		int prev = disable_ctrlc(1);	/* disable Control C checking */
 # endif
 
-# ifndef CFG_HUSH_PARSER
+# ifndef CONFIG_SYS_HUSH_PARSER
 		run_command (p, 0);
 # else
 		parse_string_outer(p, FLAG_PARSE_SEMICOLON |
@@ -390,7 +401,7 @@ void main_loop (void)
 		int prev = disable_ctrlc(1);	/* disable Control C checking */
 # endif
 
-# ifndef CFG_HUSH_PARSER
+# ifndef CONFIG_SYS_HUSH_PARSER
 		run_command (s, 0);
 # else
 		parse_string_outer(s, FLAG_PARSE_SEMICOLON |
@@ -406,7 +417,7 @@ void main_loop (void)
 	if (menukey == CONFIG_MENUKEY) {
 	    s = getenv("menucmd");
 	    if (s) {
-# ifndef CFG_HUSH_PARSER
+# ifndef CONFIG_SYS_HUSH_PARSER
 		run_command (s, 0);
 # else
 		parse_string_outer(s, FLAG_PARSE_SEMICOLON |
@@ -427,7 +438,7 @@ void main_loop (void)
 	/*
 	 * Main Loop for Monitor Command Processing
 	 */
-#ifdef CFG_HUSH_PARSER
+#ifdef CONFIG_SYS_HUSH_PARSER
 	parse_file_outer();
 	/* This point is never reached */
 	for (;;);
@@ -441,7 +452,7 @@ void main_loop (void)
 			reset_cmd_timeout();
 		}
 #endif
-		len = readline (CFG_PROMPT);
+		len = readline (CONFIG_SYS_PROMPT);
 
 		flag = 0;	/* assume no special flags for now */
 		if (len > 0)
@@ -472,7 +483,7 @@ void main_loop (void)
 			lastcommand[0] = 0;
 		}
 	}
-#endif /*CFG_HUSH_PARSER*/
+#endif /*CONFIG_SYS_HUSH_PARSER*/
 }
 
 #ifdef CONFIG_BOOT_RETRY_TIME
@@ -1031,7 +1042,7 @@ int readline_into_buffer (const char *const prompt, char * buffer)
 			/*
 			 * Must be a normal character then
 			 */
-			if (n < CFG_CBSIZE-2) {
+			if (n < CONFIG_SYS_CBSIZE-2) {
 				if (c == '\t') {	/* expand TABs		*/
 #ifdef CONFIG_AUTO_COMPLETE
 					/* if auto completion triggered just continue */
@@ -1100,7 +1111,7 @@ int parse_line (char *line, char *argv[])
 #ifdef DEBUG_PARSER
 	printf ("parse_line: \"%s\"\n", line);
 #endif
-	while (nargs < CFG_MAXARGS) {
+	while (nargs < CONFIG_SYS_MAXARGS) {
 
 		/* skip any white space */
 		while ((*line == ' ') || (*line == '\t')) {
@@ -1133,7 +1144,7 @@ int parse_line (char *line, char *argv[])
 		*line++ = '\0';		/* terminate current arg	 */
 	}
 
-	printf ("** Too many args (max. %d) **\n", CFG_MAXARGS);
+	printf ("** Too many args (max. %d) **\n", CONFIG_SYS_MAXARGS);
 
 #ifdef DEBUG_PARSER
 	printf ("parse_line: nargs=%d\n", nargs);
@@ -1148,7 +1159,7 @@ static void process_macros (const char *input, char *output)
 	char c, prev;
 	const char *varname_start = NULL;
 	int inputcnt = strlen (input);
-	int outputcnt = CFG_CBSIZE;
+	int outputcnt = CONFIG_SYS_CBSIZE;
 	int state = 0;		/* 0 = waiting for '$'  */
 
 	/* 1 = waiting for '(' or '{' */
@@ -1208,7 +1219,7 @@ static void process_macros (const char *input, char *output)
 		case 2:	/* Waiting for )        */
 			if (c == ')' || c == '}') {
 				int i;
-				char envname[CFG_CBSIZE], *envval;
+				char envname[CONFIG_SYS_CBSIZE], *envval;
 				int envcnt = input - varname_start - 1;	/* Varname # of chars */
 
 				/* Get the varname */
@@ -1259,7 +1270,7 @@ static void process_macros (const char *input, char *output)
  *	0  - command executed but not repeatable, interrupted commands are
  *	     always considered not repeatable
  *	-1 - not executed (unrecognized, bootd recursion or too many args)
- *           (If cmd is NULL or "" or longer than CFG_CBSIZE-1 it is
+ *           (If cmd is NULL or "" or longer than CONFIG_SYS_CBSIZE-1 it is
  *           considered unrecognized)
  *
  * WARNING:
@@ -1273,12 +1284,12 @@ static void process_macros (const char *input, char *output)
 int run_command (const char *cmd, int flag)
 {
 	cmd_tbl_t *cmdtp;
-	char cmdbuf[CFG_CBSIZE];	/* working copy of cmd		*/
+	char cmdbuf[CONFIG_SYS_CBSIZE];	/* working copy of cmd		*/
 	char *token;			/* start of token in cmdbuf	*/
 	char *sep;			/* end of token (separator) in cmdbuf */
-	char finaltoken[CFG_CBSIZE];
+	char finaltoken[CONFIG_SYS_CBSIZE];
 	char *str = cmdbuf;
-	char *argv[CFG_MAXARGS + 1];	/* NULL terminated	*/
+	char *argv[CONFIG_SYS_MAXARGS + 1];	/* NULL terminated	*/
 	int argc, inquotes;
 	int repeatable = 1;
 	int rc = 0;
@@ -1295,7 +1306,7 @@ int run_command (const char *cmd, int flag)
 		return -1;	/* empty command */
 	}
 
-	if (strlen(cmd) >= CFG_CBSIZE) {
+	if (strlen(cmd) >= CONFIG_SYS_CBSIZE) {
 		puts ("## Command too long!\n");
 		return -1;
 	}
@@ -1414,7 +1425,7 @@ int do_run (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
 			printf ("## Error: \"%s\" not defined\n", argv[i]);
 			return 1;
 		}
-#ifndef CFG_HUSH_PARSER
+#ifndef CONFIG_SYS_HUSH_PARSER
 		if (run_command (arg, flag) == -1)
 			return 1;
 #else
diff --git a/common/miiphyutil.c b/common/miiphyutil.c
index 5ef4a33ce..66fd9cad8 100644
--- a/common/miiphyutil.c
+++ b/common/miiphyutil.c
@@ -462,7 +462,7 @@ int miiphy_is_1000base_x (char *devname, unsigned char addr)
 #endif
 }
 
-#ifdef CFG_FAULT_ECHO_LINK_DOWN
+#ifdef CONFIG_SYS_FAULT_ECHO_LINK_DOWN
 /*****************************************************************************
  *
  * Determine link status
diff --git a/common/serial.c b/common/serial.c
index bfda7ca55..b38d1e762 100644
--- a/common/serial.c
+++ b/common/serial.c
@@ -43,7 +43,7 @@ struct serial_device *__default_serial_console (void)
 #elif defined(CONFIG_405GP) || defined(CONFIG_405CR) || defined(CONFIG_440) \
    || defined(CONFIG_405EP) || defined(CONFIG_405EZ) || defined(CONFIG_405EX) \
    || defined(CONFIG_MPC5xxx)
-#if defined(CONFIG_CONS_INDEX) && defined(CFG_NS16550_SERIAL)
+#if defined(CONFIG_CONS_INDEX) && defined(CONFIG_SYS_NS16550_SERIAL)
 #if (CONFIG_CONS_INDEX==1)
 	return &eserial1_device;
 #elif (CONFIG_CONS_INDEX==2)
@@ -110,20 +110,20 @@ void serial_initialize (void)
 	serial_register(&serial1_device);
 #endif
 
-#if defined(CFG_NS16550_SERIAL)
-#if defined(CFG_NS16550_COM1)
+#if defined(CONFIG_SYS_NS16550_SERIAL)
+#if defined(CONFIG_SYS_NS16550_COM1)
 	serial_register(&eserial1_device);
 #endif
-#if defined(CFG_NS16550_COM2)
+#if defined(CONFIG_SYS_NS16550_COM2)
 	serial_register(&eserial2_device);
 #endif
-#if defined(CFG_NS16550_COM3)
+#if defined(CONFIG_SYS_NS16550_COM3)
 	serial_register(&eserial3_device);
 #endif
-#if defined(CFG_NS16550_COM4)
+#if defined(CONFIG_SYS_NS16550_COM4)
 	serial_register(&eserial4_device);
 #endif
-#endif /* CFG_NS16550_SERIAL */
+#endif /* CONFIG_SYS_NS16550_SERIAL */
 #if defined (CONFIG_FFUART)
 	serial_register(&serial_ffuart_device);
 #endif
diff --git a/common/update.c b/common/update.c
new file mode 100644
index 000000000..752847487
--- /dev/null
+++ b/common/update.c
@@ -0,0 +1,315 @@
+/*
+ * (C) Copyright 2008 Semihalf
+ *
+ * Written by: Rafal Czubak <rcz@semihalf.com>
+ *             Bartlomiej Sieka <tur@semihalf.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+#include <common.h>
+
+#if !(defined(CONFIG_FIT) && defined(CONFIG_OF_LIBFDT))
+#error "CONFIG_FIT and CONFIG_OF_LIBFDT are required for auto-update feature"
+#endif
+
+#if defined(CONFIG_SYS_NO_FLASH)
+#error "CONFIG_SYS_NO_FLASH defined, but FLASH is required for auto-update feature"
+#endif
+
+#include <command.h>
+#include <flash.h>
+#include <net.h>
+#include <malloc.h>
+
+/* env variable holding the location of the update file */
+#define UPDATE_FILE_ENV		"updatefile"
+
+/* set configuration defaults if needed */
+#ifndef CONFIG_UPDATE_LOAD_ADDR
+#define CONFIG_UPDATE_LOAD_ADDR	0x100000
+#endif
+
+#ifndef CONFIG_UPDATE_TFTP_MSEC_MAX
+#define CONFIG_UPDATE_TFTP_MSEC_MAX	100
+#endif
+
+#ifndef CONFIG_UPDATE_TFTP_CNT_MAX
+#define CONFIG_UPDATE_TFTP_CNT_MAX	0
+#endif
+
+extern ulong TftpRRQTimeoutMSecs;
+extern int TftpRRQTimeoutCountMax;
+extern flash_info_t flash_info[];
+extern ulong load_addr;
+
+static uchar *saved_prot_info;
+
+static int update_load(char *filename, ulong msec_max, int cnt_max, ulong addr)
+{
+	int size, rv;
+	ulong saved_timeout_msecs;
+	int saved_timeout_count;
+	char *saved_netretry, *saved_bootfile;
+
+	rv = 0;
+	/* save used globals and env variable */
+	saved_timeout_msecs = TftpRRQTimeoutMSecs;
+	saved_timeout_count = TftpRRQTimeoutCountMax;
+	saved_netretry = strdup(getenv("netretry"));
+	saved_bootfile = strdup(BootFile);
+
+	/* set timeouts for auto-update */
+	TftpRRQTimeoutMSecs = msec_max;
+	TftpRRQTimeoutCountMax = cnt_max;
+
+	/* we don't want to retry the connection if errors occur */
+	setenv("netretry", "no");
+
+	/* download the update file */
+	load_addr = addr;
+	copy_filename(BootFile, filename, sizeof(BootFile));
+	size = NetLoop(TFTP);
+
+	if (size < 0)
+		rv = 1;
+	else if (size > 0)
+		flush_cache(addr, size);
+
+	/* restore changed globals and env variable */
+	TftpRRQTimeoutMSecs = saved_timeout_msecs;
+	TftpRRQTimeoutCountMax = saved_timeout_count;
+
+	setenv("netretry", saved_netretry);
+	if (saved_netretry != NULL)
+		free(saved_netretry);
+
+	if (saved_bootfile != NULL) {
+		copy_filename(BootFile, saved_bootfile, sizeof(BootFile));
+		free(saved_bootfile);
+	}
+
+	return rv;
+}
+
+static int update_flash_protect(int prot, ulong addr_first, ulong addr_last)
+{
+	uchar *sp_info_ptr;
+	ulong s;
+	int i, bank, cnt;
+	flash_info_t *info;
+
+	sp_info_ptr = NULL;
+
+	if (prot == 0) {
+		saved_prot_info =
+			calloc(CONFIG_SYS_MAX_FLASH_BANKS * CONFIG_SYS_MAX_FLASH_SECT, 1);
+		if (!saved_prot_info)
+			return 1;
+	}
+
+	for (bank = 0; bank < CONFIG_SYS_MAX_FLASH_BANKS; ++bank) {
+		cnt = 0;
+		info = &flash_info[bank];
+
+		/* Nothing to do if the bank doesn't exist */
+		if (info->sector_count == 0)
+			return 0;
+
+		/* Point to current bank protection information */
+		sp_info_ptr = saved_prot_info + (bank * CONFIG_SYS_MAX_FLASH_SECT);
+
+		/*
+		 * Adjust addr_first or addr_last if we are on bank boundary.
+		 * Address space between banks must be continuous for other
+		 * flash functions (like flash_sect_erase or flash_write) to
+		 * succeed. Banks must also be numbered in correct order,
+		 * according to increasing addresses.
+		 */
+		if (addr_last > info->start[0] + info->size - 1)
+			addr_last = info->start[0] + info->size - 1;
+		if (addr_first < info->start[0])
+			addr_first = info->start[0];
+
+		for (i = 0; i < info->sector_count; i++) {
+			/* Save current information about protected sectors */
+			if (prot == 0) {
+				s = info->start[i];
+				if ((s >= addr_first) && (s <= addr_last))
+					sp_info_ptr[i] = info->protect[i];
+
+			}
+
+			/* Protect/unprotect sectors */
+			if (sp_info_ptr[i] == 1) {
+#if defined(CONFIG_SYS_FLASH_PROTECTION)
+				if (flash_real_protect(info, i, prot))
+					return 1;
+#else
+				info->protect[i] = prot;
+#endif
+				cnt++;
+			}
+		}
+
+		if (cnt) {
+			printf("%sProtected %d sectors\n",
+						prot ? "": "Un-", cnt);
+		}
+	}
+
+	if((prot == 1) && saved_prot_info)
+		free(saved_prot_info);
+
+	return 0;
+}
+
+static int update_flash(ulong addr_source, ulong addr_first, ulong size)
+{
+	ulong addr_last = addr_first + size - 1;
+
+	/* round last address to the sector boundary */
+	if (flash_sect_roundb(&addr_last) > 0)
+		return 1;
+
+	if (addr_first >= addr_last) {
+		printf("Error: end address exceeds addressing space\n");
+		return 1;
+	}
+
+	/* remove protection on processed sectors */
+	if (update_flash_protect(0, addr_first, addr_last) > 0) {
+		printf("Error: could not unprotect flash sectors\n");
+		return 1;
+	}
+
+	printf("Erasing 0x%08lx - 0x%08lx", addr_first, addr_last);
+	if (flash_sect_erase(addr_first, addr_last) > 0) {
+		printf("Error: could not erase flash\n");
+		return 1;
+	}
+
+	printf("Copying to flash...");
+	if (flash_write((char *)addr_source, addr_first, size) > 0) {
+		printf("Error: could not copy to flash\n");
+		return 1;
+	}
+	printf("done\n");
+
+	/* enable protection on processed sectors */
+	if (update_flash_protect(1, addr_first, addr_last) > 0) {
+		printf("Error: could not protect flash sectors\n");
+		return 1;
+	}
+
+	return 0;
+}
+
+static int update_fit_getparams(const void *fit, int noffset, ulong *addr,
+						ulong *fladdr, ulong *size)
+{
+	const void *data;
+
+	if (fit_image_get_data(fit, noffset, &data, (size_t *)size))
+		return 1;
+
+	if (fit_image_get_load(fit, noffset, (ulong *)fladdr))
+		return 1;
+
+	*addr = (ulong)data;
+
+	return 0;
+}
+
+void update_tftp(void)
+{
+	char *filename, *env_addr;
+	int images_noffset, ndepth, noffset;
+	ulong update_addr, update_fladdr, update_size;
+	ulong addr;
+	void *fit;
+
+	printf("Auto-update from TFTP: ");
+
+	/* get the file name of the update file */
+	filename = getenv(UPDATE_FILE_ENV);
+	if (filename == NULL) {
+		printf("failed, env. variable '%s' not found\n",
+							UPDATE_FILE_ENV);
+		return;
+	}
+
+	printf("trying update file '%s'\n", filename);
+
+	/* get load address of downloaded update file */
+	if ((env_addr = getenv("loadaddr")) != NULL)
+		addr = simple_strtoul(env_addr, NULL, 16);
+	else
+		addr = CONFIG_UPDATE_LOAD_ADDR;
+
+
+	if (update_load(filename, CONFIG_UPDATE_TFTP_MSEC_MAX,
+					CONFIG_UPDATE_TFTP_CNT_MAX, addr)) {
+		printf("Can't load update file, aborting auto-update\n");
+		return;
+	}
+
+	fit = (void *)addr;
+
+	if (!fit_check_format((void *)fit)) {
+		printf("Bad FIT format of the update file, aborting "
+							"auto-update\n");
+		return;
+	}
+
+	/* process updates */
+	images_noffset = fdt_path_offset(fit, FIT_IMAGES_PATH);
+
+	ndepth = 0;
+	noffset = fdt_next_node(fit, images_noffset, &ndepth);
+	while (noffset >= 0 && ndepth > 0) {
+		if (ndepth != 1)
+			goto next_node;
+
+		printf("Processing update '%s' :",
+			fit_get_name(fit, noffset, NULL));
+
+		if (!fit_image_check_hashes(fit, noffset)) {
+			printf("Error: invalid update hash, aborting\n");
+			goto next_node;
+		}
+
+		printf("\n");
+		if (update_fit_getparams(fit, noffset, &update_addr,
+					&update_fladdr, &update_size)) {
+			printf("Error: can't get update parameteres, "
+								"aborting\n");
+			goto next_node;
+		}
+		if (update_flash(update_addr, update_fladdr, update_size)) {
+			printf("Error: can't flash update, aborting\n");
+			goto next_node;
+		}
+next_node:
+		noffset = fdt_next_node(fit, noffset, &ndepth);
+	}
+
+	return;
+}
diff --git a/common/usb.c b/common/usb.c
index 9502f3903..ee181528c 100644
--- a/common/usb.c
+++ b/common/usb.c
@@ -58,9 +58,9 @@
 #undef USB_DEBUG
 
 #ifdef	USB_DEBUG
-#define	USB_PRINTF(fmt,args...)	printf (fmt ,##args)
+#define	USB_PRINTF(fmt, args...)	printf(fmt , ##args)
 #else
-#define USB_PRINTF(fmt,args...)
+#define USB_PRINTF(fmt, args...)
 #endif
 
 #define USB_BUFSIZ	512
@@ -80,17 +80,19 @@ void usb_scan_devices(void);
 
 int usb_hub_probe(struct usb_device *dev, int ifnum);
 void usb_hub_reset(void);
-
+static int hub_port_reset(struct usb_device *dev, int port,
+			  unsigned short *portstat);
 
 /***********************************************************************
  * wait_ms
  */
 
-void __inline__ wait_ms(unsigned long ms)
+inline void wait_ms(unsigned long ms)
 {
-	while(ms-->0)
+	while (ms-- > 0)
 		udelay(1000);
 }
+
 /***************************************************************************
  * Init USB Device
  */
@@ -99,22 +101,22 @@ int usb_init(void)
 {
 	int result;
 
-	running=0;
-	dev_index=0;
-	asynch_allowed=1;
+	running = 0;
+	dev_index = 0;
+	asynch_allowed = 1;
 	usb_hub_reset();
 	/* init low_level USB */
 	printf("USB:   ");
 	result = usb_lowlevel_init();
-	/* if lowlevel init is OK, scan the bus for devices i.e. search HUBs and configure them */
-	if(result==0) {
+	/* if lowlevel init is OK, scan the bus for devices
+	 * i.e. search HUBs and configure them */
+	if (result == 0) {
 		printf("scanning bus for devices... ");
-		running=1;
+		running = 1;
 		usb_scan_devices();
 		usb_started = 1;
 		return 0;
-	}
-	else {
+	} else {
 		printf("Error, couldn't init Lowlevel part\n");
 		usb_started = 0;
 		return -1;
@@ -126,10 +128,15 @@ int usb_init(void)
  */
 int usb_stop(void)
 {
-	asynch_allowed=1;
-	usb_started = 0;
-	usb_hub_reset();
-	return usb_lowlevel_stop();
+	int res = 0;
+
+	if (usb_started) {
+		asynch_allowed = 1;
+		usb_started = 0;
+		usb_hub_reset();
+		res = usb_lowlevel_stop();
+	}
+	return res;
 }
 
 /*
@@ -138,7 +145,7 @@ int usb_stop(void)
  */
 void usb_disable_asynch(int disable)
 {
-	asynch_allowed=!disable;
+	asynch_allowed = !disable;
 }
 
 
@@ -151,9 +158,9 @@ void usb_disable_asynch(int disable)
  * submits an Interrupt Message
  */
 int usb_submit_int_msg(struct usb_device *dev, unsigned long pipe,
-			void *buffer,int transfer_len, int interval)
+			void *buffer, int transfer_len, int interval)
 {
-	return submit_int_msg(dev,pipe,buffer,transfer_len,interval);
+	return submit_int_msg(dev, pipe, buffer, transfer_len, interval);
 }
 
 /*
@@ -170,8 +177,10 @@ int usb_control_msg(struct usb_device *dev, unsigned int pipe,
 			unsigned short value, unsigned short index,
 			void *data, unsigned short size, int timeout)
 {
-	if((timeout==0)&&(!asynch_allowed)) /* request for a asynch control pipe is not allowed */
+	if ((timeout == 0) && (!asynch_allowed)) {
+		/* request for a asynch control pipe is not allowed */
 		return -1;
+	}
 
 	/* set setup command */
 	setup_packet.requesttype = requesttype;
@@ -179,24 +188,25 @@ int usb_control_msg(struct usb_device *dev, unsigned int pipe,
 	setup_packet.value = cpu_to_le16(value);
 	setup_packet.index = cpu_to_le16(index);
 	setup_packet.length = cpu_to_le16(size);
-	USB_PRINTF("usb_control_msg: request: 0x%X, requesttype: 0x%X, value 0x%X index 0x%X length 0x%X\n",
-		request,requesttype,value,index,size);
-	dev->status=USB_ST_NOT_PROC; /*not yet processed */
+	USB_PRINTF("usb_control_msg: request: 0x%X, requesttype: 0x%X, " \
+		   "value 0x%X index 0x%X length 0x%X\n",
+		   request, requesttype, value, index, size);
+	dev->status = USB_ST_NOT_PROC; /*not yet processed */
 
-	submit_control_msg(dev,pipe,data,size,&setup_packet);
-	if(timeout==0) {
+	submit_control_msg(dev, pipe, data, size, &setup_packet);
+	if (timeout == 0)
 		return (int)size;
-	}
-	while(timeout--) {
-		if(!((volatile unsigned long)dev->status & USB_ST_NOT_PROC))
-			break;
-		wait_ms(1);
-	}
-	if(dev->status==0)
-		return dev->act_len;
-	else {
+
+	if (dev->status != 0) {
+		/*
+		 * Let's wait a while for the timeout to elapse.
+		 * It has no real use, but it keeps the interface happy.
+		 */
+		wait_ms(timeout);
 		return -1;
 	}
+
+	return dev->act_len;
 }
 
 /*-------------------------------------------------------------------
@@ -209,15 +219,15 @@ int usb_bulk_msg(struct usb_device *dev, unsigned int pipe,
 {
 	if (len < 0)
 		return -1;
-	dev->status=USB_ST_NOT_PROC; /*not yet processed */
-	submit_bulk_msg(dev,pipe,data,len);
-	while(timeout--) {
-		if(!((volatile unsigned long)dev->status & USB_ST_NOT_PROC))
+	dev->status = USB_ST_NOT_PROC; /*not yet processed */
+	submit_bulk_msg(dev, pipe, data, len);
+	while (timeout--) {
+		if (!((volatile unsigned long)dev->status & USB_ST_NOT_PROC))
 			break;
 		wait_ms(1);
 	}
-	*actual_length=dev->act_len;
-	if(dev->status==0)
+	*actual_length = dev->act_len;
+	if (dev->status == 0)
 		return 0;
 	else
 		return -1;
@@ -232,12 +242,54 @@ int usb_bulk_msg(struct usb_device *dev, unsigned int pipe,
  * returns the max packet size, depending on the pipe direction and
  * the configurations values
  */
-int usb_maxpacket(struct usb_device *dev,unsigned long pipe)
+int usb_maxpacket(struct usb_device *dev, unsigned long pipe)
 {
-	if((pipe & USB_DIR_IN)==0) /* direction is out -> use emaxpacket out */
-		return(dev->epmaxpacketout[((pipe>>15) & 0xf)]);
+	/* direction is out -> use emaxpacket out */
+	if ((pipe & USB_DIR_IN) == 0)
+		return dev->epmaxpacketout[((pipe>>15) & 0xf)];
 	else
-		return(dev->epmaxpacketin[((pipe>>15) & 0xf)]);
+		return dev->epmaxpacketin[((pipe>>15) & 0xf)];
+}
+
+/* The routine usb_set_maxpacket_ep() is extracted from the loop of routine
+ * usb_set_maxpacket(), because the optimizer of GCC 4.x chokes on this routine
+ * when it is inlined in 1 single routine. What happens is that the register r3
+ * is used as loop-count 'i', but gets overwritten later on.
+ * This is clearly a compiler bug, but it is easier to workaround it here than
+ * to update the compiler (Occurs with at least several GCC 4.{1,2},x
+ * CodeSourcery compilers like e.g. 2007q3, 2008q1, 2008q3 lite editions on ARM)
+ */
+static void  __attribute__((noinline))
+usb_set_maxpacket_ep(struct usb_device *dev, struct usb_endpoint_descriptor *ep)
+{
+	int b;
+
+	b = ep->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK;
+
+	if ((ep->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) ==
+						USB_ENDPOINT_XFER_CONTROL) {
+		/* Control => bidirectional */
+		dev->epmaxpacketout[b] = ep->wMaxPacketSize;
+		dev->epmaxpacketin[b] = ep->wMaxPacketSize;
+		USB_PRINTF("##Control EP epmaxpacketout/in[%d] = %d\n",
+			   b, dev->epmaxpacketin[b]);
+	} else {
+		if ((ep->bEndpointAddress & 0x80) == 0) {
+			/* OUT Endpoint */
+			if (ep->wMaxPacketSize > dev->epmaxpacketout[b]) {
+				dev->epmaxpacketout[b] = ep->wMaxPacketSize;
+				USB_PRINTF("##EP epmaxpacketout[%d] = %d\n",
+					   b, dev->epmaxpacketout[b]);
+			}
+		} else {
+			/* IN Endpoint */
+			if (ep->wMaxPacketSize > dev->epmaxpacketin[b]) {
+				dev->epmaxpacketin[b] = ep->wMaxPacketSize;
+				USB_PRINTF("##EP epmaxpacketin[%d] = %d\n",
+					   b, dev->epmaxpacketin[b]);
+			}
+		} /* if out */
+	} /* if control */
 }
 
 /*
@@ -245,35 +297,13 @@ int usb_maxpacket(struct usb_device *dev,unsigned long pipe)
  */
 int usb_set_maxpacket(struct usb_device *dev)
 {
-	int i,ii,b;
-	struct usb_endpoint_descriptor *ep;
+	int i, ii;
 
-	for(i=0; i<dev->config.bNumInterfaces;i++) {
-		for(ii=0; ii<dev->config.if_desc[i].bNumEndpoints; ii++) {
-			ep = &dev->config.if_desc[i].ep_desc[ii];
-			b=ep->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK;
+	for (i = 0; i < dev->config.bNumInterfaces; i++)
+		for (ii = 0; ii < dev->config.if_desc[i].bNumEndpoints; ii++)
+			usb_set_maxpacket_ep(dev,
+					  &dev->config.if_desc[i].ep_desc[ii]);
 
-			if((ep->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK)==USB_ENDPOINT_XFER_CONTROL) {	/* Control => bidirectional */
-				dev->epmaxpacketout[b] = ep->wMaxPacketSize;
-				dev->epmaxpacketin [b] = ep->wMaxPacketSize;
-				USB_PRINTF("##Control EP epmaxpacketout/in[%d] = %d\n",b,dev->epmaxpacketin[b]);
-			}
-			else {
-				if ((ep->bEndpointAddress & 0x80)==0) { /* OUT Endpoint */
-					if(ep->wMaxPacketSize > dev->epmaxpacketout[b]) {
-						dev->epmaxpacketout[b] = ep->wMaxPacketSize;
-						USB_PRINTF("##EP epmaxpacketout[%d] = %d\n",b,dev->epmaxpacketout[b]);
-					}
-				}
-				else  { /* IN Endpoint */
-					if(ep->wMaxPacketSize > dev->epmaxpacketin[b]) {
-						dev->epmaxpacketin[b] = ep->wMaxPacketSize;
-						USB_PRINTF("##EP epmaxpacketin[%d] = %d\n",b,dev->epmaxpacketin[b]);
-					}
-				} /* if out */
-			} /* if control */
-		} /* for each endpoint */
-	}
 	return 0;
 }
 
@@ -294,8 +324,9 @@ int usb_parse_config(struct usb_device *dev, unsigned char *buffer, int cfgno)
 
 	dev->configno = cfgno;
 	head = (struct usb_descriptor_header *) &buffer[0];
-	if(head->bDescriptorType != USB_DT_CONFIG) {
-		printf(" ERROR: NOT USB_CONFIG_DESC %x\n", head->bDescriptorType);
+	if (head->bDescriptorType != USB_DT_CONFIG) {
+		printf(" ERROR: NOT USB_CONFIG_DESC %x\n",
+			head->bDescriptorType);
 		return -1;
 	}
 	memcpy(&dev->config, buffer, buffer[0]);
@@ -303,45 +334,52 @@ int usb_parse_config(struct usb_device *dev, unsigned char *buffer, int cfgno)
 	dev->config.no_of_if = 0;
 
 	index = dev->config.bLength;
-	/* Ok the first entry must be a configuration entry, now process the others */
+	/* Ok the first entry must be a configuration entry,
+	 * now process the others */
 	head = (struct usb_descriptor_header *) &buffer[index];
-	while(index + 1 < dev->config.wTotalLength) {
-		switch(head->bDescriptorType) {
-			case USB_DT_INTERFACE:
-				if(((struct usb_interface_descriptor *) &buffer[index])->
-					bInterfaceNumber != curr_if_num) {
-					/* this is a new interface, copy new desc */
-					ifno = dev->config.no_of_if;
-					dev->config.no_of_if++;
-					memcpy(&dev->config.if_desc[ifno],
-						&buffer[index], buffer[index]);
-					dev->config.if_desc[ifno].no_of_ep = 0;
-					dev->config.if_desc[ifno].num_altsetting = 1;
-					curr_if_num = dev->config.if_desc[ifno].bInterfaceNumber;
-				} else {
-					/* found alternate setting for the interface */
-					dev->config.if_desc[ifno].num_altsetting++;
-				}
-				break;
-			case USB_DT_ENDPOINT:
-				epno = dev->config.if_desc[ifno].no_of_ep;
-				dev->config.if_desc[ifno].no_of_ep++; /* found an endpoint */
-				memcpy(&dev->config.if_desc[ifno].ep_desc[epno],
+	while (index + 1 < dev->config.wTotalLength) {
+		switch (head->bDescriptorType) {
+		case USB_DT_INTERFACE:
+			if (((struct usb_interface_descriptor *) \
+			     &buffer[index])->bInterfaceNumber != curr_if_num) {
+				/* this is a new interface, copy new desc */
+				ifno = dev->config.no_of_if;
+				dev->config.no_of_if++;
+				memcpy(&dev->config.if_desc[ifno],
 					&buffer[index], buffer[index]);
-				le16_to_cpus(&(dev->config.if_desc[ifno].ep_desc[epno].wMaxPacketSize));
-				USB_PRINTF("if %d, ep %d\n", ifno, epno);
-				break;
-			default:
-				if(head->bLength == 0)
-					return 1;
-				USB_PRINTF("unknown Description Type : %x\n", head->bDescriptorType);
-				{
-					ch = (unsigned char *)head;
-					for(i = 0; i < head->bLength; i++)
-						USB_PRINTF("%02X ", *ch++);
-					USB_PRINTF("\n\n\n");
-				}
-				break;
+				dev->config.if_desc[ifno].no_of_ep = 0;
+				dev->config.if_desc[ifno].num_altsetting = 1;
+				curr_if_num =
+				     dev->config.if_desc[ifno].bInterfaceNumber;
+			} else {
+				/* found alternate setting for the interface */
+				dev->config.if_desc[ifno].num_altsetting++;
+			}
+			break;
+		case USB_DT_ENDPOINT:
+			epno = dev->config.if_desc[ifno].no_of_ep;
+			/* found an endpoint */
+			dev->config.if_desc[ifno].no_of_ep++;
+			memcpy(&dev->config.if_desc[ifno].ep_desc[epno],
+				&buffer[index], buffer[index]);
+			le16_to_cpus(&(dev->config.if_desc[ifno].ep_desc[epno].\
+							       wMaxPacketSize));
+			USB_PRINTF("if %d, ep %d\n", ifno, epno);
+			break;
+		default:
+			if (head->bLength == 0)
+				return 1;
+
+			USB_PRINTF("unknown Description Type : %x\n",
+				   head->bDescriptorType);
+
+			{
+				ch = (unsigned char *)head;
+				for (i = 0; i < head->bLength; i++)
+					USB_PRINTF("%02X ", *ch++);
+				USB_PRINTF("\n\n\n");
+			}
+			break;
 		}
 		index += head->bLength;
 		head = (struct usb_descriptor_header *)&buffer[index];
@@ -360,7 +398,8 @@ int usb_clear_halt(struct usb_device *dev, int pipe)
 	int endp = usb_pipeendpoint(pipe)|(usb_pipein(pipe)<<7);
 
 	result = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
-		USB_REQ_CLEAR_FEATURE, USB_RECIP_ENDPOINT, 0, endp, NULL, 0, USB_CNTL_TIMEOUT * 3);
+				 USB_REQ_CLEAR_FEATURE, USB_RECIP_ENDPOINT, 0,
+				 endp, NULL, 0, USB_CNTL_TIMEOUT * 3);
 
 	/* don't clear if failed */
 	if (result < 0)
@@ -382,7 +421,8 @@ int usb_clear_halt(struct usb_device *dev, int pipe)
 /**********************************************************************
  * get_descriptor type
  */
-int usb_get_descriptor(struct usb_device *dev, unsigned char type, unsigned char index, void *buf, int size)
+int usb_get_descriptor(struct usb_device *dev, unsigned char type,
+			unsigned char index, void *buf, int size)
 {
 	int res;
 	res = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0),
@@ -395,32 +435,36 @@ int usb_get_descriptor(struct usb_device *dev, unsigned char type, unsigned char
 /**********************************************************************
  * gets configuration cfgno and store it in the buffer
  */
-int usb_get_configuration_no(struct usb_device *dev,unsigned char *buffer,int cfgno)
+int usb_get_configuration_no(struct usb_device *dev,
+			     unsigned char *buffer, int cfgno)
 {
 	int result;
 	unsigned int tmp;
 	struct usb_config_descriptor *config;
 
 
-	config=(struct usb_config_descriptor *)&buffer[0];
-	result = usb_get_descriptor(dev, USB_DT_CONFIG, cfgno, buffer, 8);
-	if (result < 8) {
+	config = (struct usb_config_descriptor *)&buffer[0];
+	result = usb_get_descriptor(dev, USB_DT_CONFIG, cfgno, buffer, 9);
+	if (result < 9) {
 		if (result < 0)
-			printf("unable to get descriptor, error %lX\n",dev->status);
+			printf("unable to get descriptor, error %lX\n",
+				dev->status);
 		else
-			printf("config descriptor too short (expected %i, got %i)\n",8,result);
+			printf("config descriptor too short " \
+				"(expected %i, got %i)\n", 9, result);
 		return -1;
 	}
 	tmp = le16_to_cpu(config->wTotalLength);
 
 	if (tmp > USB_BUFSIZ) {
-		USB_PRINTF("usb_get_configuration_no: failed to get descriptor - too long: %d\n",
-			tmp);
+		USB_PRINTF("usb_get_configuration_no: failed to get " \
+			   "descriptor - too long: %d\n", tmp);
 		return -1;
 	}
 
 	result = usb_get_descriptor(dev, USB_DT_CONFIG, cfgno, buffer, tmp);
-	USB_PRINTF("get_conf_no %d Result %d, wLength %d\n",cfgno,result,tmp);
+	USB_PRINTF("get_conf_no %d Result %d, wLength %d\n",
+		   cfgno, result, tmp);
 	return result;
 }
 
@@ -432,11 +476,11 @@ int usb_set_address(struct usb_device *dev)
 {
 	int res;
 
-	USB_PRINTF("set address %d\n",dev->devnum);
-	res=usb_control_msg(dev, usb_snddefctrl(dev),
-		USB_REQ_SET_ADDRESS, 0,
-		(dev->devnum),0,
-		NULL,0, USB_CNTL_TIMEOUT);
+	USB_PRINTF("set address %d\n", dev->devnum);
+	res = usb_control_msg(dev, usb_snddefctrl(dev),
+				USB_REQ_SET_ADDRESS, 0,
+				(dev->devnum), 0,
+				NULL, 0, USB_CNTL_TIMEOUT);
 	return res;
 }
 
@@ -460,16 +504,19 @@ int usb_set_interface(struct usb_device *dev, int interface, int alternate)
 	}
 	/*
 	 * We should return now for devices with only one alternate setting.
-	 * According to 9.4.10 of the Universal Serial Bus Specification Revision 2.0
-	 * such devices can return with a STALL. This results in some USB sticks
-	 * timeouting during initialization and then being unusable in U-Boot.
+	 * According to 9.4.10 of the Universal Serial Bus Specification
+	 * Revision 2.0 such devices can return with a STALL. This results in
+	 * some USB sticks timeouting during initialization and then being
+	 * unusable in U-Boot.
 	 */
 	if (if_face->num_altsetting == 1)
 		return 0;
 
-	if ((ret = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
-	    USB_REQ_SET_INTERFACE, USB_RECIP_INTERFACE, alternate,
-	    interface, NULL, 0, USB_CNTL_TIMEOUT * 5)) < 0)
+	ret = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
+				USB_REQ_SET_INTERFACE, USB_RECIP_INTERFACE,
+				alternate, interface, NULL, 0,
+				USB_CNTL_TIMEOUT * 5);
+	if (ret < 0)
 		return ret;
 
 	return 0;
@@ -481,18 +528,17 @@ int usb_set_interface(struct usb_device *dev, int interface, int alternate)
 int usb_set_configuration(struct usb_device *dev, int configuration)
 {
 	int res;
-	USB_PRINTF("set configuration %d\n",configuration);
+	USB_PRINTF("set configuration %d\n", configuration);
 	/* set setup command */
-	res=usb_control_msg(dev, usb_sndctrlpipe(dev,0),
-		USB_REQ_SET_CONFIGURATION, 0,
-		configuration,0,
-		NULL,0, USB_CNTL_TIMEOUT);
-	if(res==0) {
+	res = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
+				USB_REQ_SET_CONFIGURATION, 0,
+				configuration, 0,
+				NULL, 0, USB_CNTL_TIMEOUT);
+	if (res == 0) {
 		dev->toggle[0] = 0;
 		dev->toggle[1] = 0;
 		return 0;
-	}
-	else
+	} else
 		return -1;
 }
 
@@ -519,11 +565,13 @@ int usb_set_idle(struct usb_device *dev, int ifnum, int duration, int report_id)
 /********************************************************************
  * get report
  */
-int usb_get_report(struct usb_device *dev, int ifnum, unsigned char type, unsigned char id, void *buf, int size)
+int usb_get_report(struct usb_device *dev, int ifnum, unsigned char type,
+		   unsigned char id, void *buf, int size)
 {
 	return usb_control_msg(dev, usb_rcvctrlpipe(dev, 0),
-		USB_REQ_GET_REPORT, USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE,
-		(type << 8) + id, ifnum, buf, size, USB_CNTL_TIMEOUT);
+			USB_REQ_GET_REPORT,
+			USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE,
+			(type << 8) + id, ifnum, buf, size, USB_CNTL_TIMEOUT);
 }
 
 /********************************************************************
@@ -540,7 +588,8 @@ int usb_get_class_descriptor(struct usb_device *dev, int ifnum,
 /********************************************************************
  * get string index in buffer
  */
-int usb_get_string(struct usb_device *dev, unsigned short langid, unsigned char index, void *buf, int size)
+int usb_get_string(struct usb_device *dev, unsigned short langid,
+		   unsigned char index, void *buf, int size)
 {
 	int i;
 	int result;
@@ -631,17 +680,19 @@ int usb_string(struct usb_device *dev, int index, char *buf, size_t size)
 	if (!dev->have_langid) {
 		err = usb_string_sub(dev, 0, 0, tbuf);
 		if (err < 0) {
-			USB_PRINTF("error getting string descriptor 0 (error=%x)\n",dev->status);
+			USB_PRINTF("error getting string descriptor 0 " \
+				   "(error=%x)\n", dev->status);
 			return -1;
 		} else if (tbuf[0] < 4) {
 			USB_PRINTF("string descriptor 0 too short\n");
 			return -1;
 		} else {
 			dev->have_langid = -1;
-			dev->string_langid = tbuf[2] | (tbuf[3]<< 8);
+			dev->string_langid = tbuf[2] | (tbuf[3] << 8);
 				/* always use the first langid listed */
-			USB_PRINTF("USB device number %d default language ID 0x%x\n",
-				dev->devnum, dev->string_langid);
+			USB_PRINTF("USB device number %d default " \
+				   "language ID 0x%x\n",
+				   dev->devnum, dev->string_langid);
 		}
 	}
 
@@ -673,9 +724,9 @@ int usb_string(struct usb_device *dev, int index, char *buf, size_t size)
 /* returns a pointer to the device with the index [index].
  * if the device is not assigned (dev->devnum==-1) returns NULL
  */
-struct usb_device * usb_get_dev_index(int index)
+struct usb_device *usb_get_dev_index(int index)
 {
-	if(usb_dev[index].devnum==-1)
+	if (usb_dev[index].devnum == -1)
 		return NULL;
 	else
 		return &usb_dev[index];
@@ -685,21 +736,22 @@ struct usb_device * usb_get_dev_index(int index)
 /* returns a pointer of a new device structure or NULL, if
  * no device struct is available
  */
-struct usb_device * usb_alloc_new_device(void)
+struct usb_device *usb_alloc_new_device(void)
 {
 	int i;
-	USB_PRINTF("New Device %d\n",dev_index);
-	if(dev_index==USB_MAX_DEVICE) {
-		printf("ERROR, too many USB Devices, max=%d\n",USB_MAX_DEVICE);
+	USB_PRINTF("New Device %d\n", dev_index);
+	if (dev_index == USB_MAX_DEVICE) {
+		printf("ERROR, too many USB Devices, max=%d\n", USB_MAX_DEVICE);
 		return NULL;
 	}
-	usb_dev[dev_index].devnum=dev_index+1; /* default Address is 0, real addresses start with 1 */
-	usb_dev[dev_index].maxchild=0;
-	for(i=0;i<USB_MAXCHILDREN;i++)
-		usb_dev[dev_index].children[i]=NULL;
-	usb_dev[dev_index].parent=NULL;
+	/* default Address is 0, real addresses start with 1 */
+	usb_dev[dev_index].devnum = dev_index + 1;
+	usb_dev[dev_index].maxchild = 0;
+	for (i = 0; i < USB_MAXCHILDREN; i++)
+		usb_dev[dev_index].children[i] = NULL;
+	usb_dev[dev_index].parent = NULL;
 	dev_index++;
-	return &usb_dev[dev_index-1];
+	return &usb_dev[dev_index - 1];
 }
 
 
@@ -716,23 +768,35 @@ int usb_new_device(struct usb_device *dev)
 	int tmp;
 	unsigned char tmpbuf[USB_BUFSIZ];
 
-	dev->descriptor.bMaxPacketSize0 = 8;  /* Start off at 8 bytes  */
-	dev->maxpacketsize = 0;		/* Default to 8 byte max packet size */
-	dev->epmaxpacketin [0] = 8;
-	dev->epmaxpacketout[0] = 8;
-
 	/* We still haven't set the Address yet */
 	addr = dev->devnum;
 	dev->devnum = 0;
 
-#undef NEW_INIT_SEQ
-#ifdef NEW_INIT_SEQ
-	/* this is a Windows scheme of initialization sequence, with double
-	 * reset of the device. Some equipment is said to work only with such
-	 * init sequence; this patch is based on the work by Alan Stern:
-	 * http://sourceforge.net/mailarchive/forum.php?thread_id=5729457&forum_id=5398
+#ifdef CONFIG_LEGACY_USB_INIT_SEQ
+	/* this is the old and known way of initializing devices, it is
+	 * different than what Windows and Linux are doing. Windows and Linux
+	 * both retrieve 64 bytes while reading the device descriptor
+	 * Several USB stick devices report ERR: CTL_TIMEOUT, caused by an
+	 * invalid header while reading 8 bytes as device descriptor. */
+	dev->descriptor.bMaxPacketSize0 = 8;	    /* Start off at 8 bytes  */
+	dev->maxpacketsize = PACKET_SIZE_8;
+	dev->epmaxpacketin[0] = 8;
+	dev->epmaxpacketout[0] = 8;
+
+	err = usb_get_descriptor(dev, USB_DT_DEVICE, 0, &dev->descriptor, 8);
+	if (err < 8) {
+		printf("\n      USB device not responding, " \
+		       "giving up (status=%lX)\n", dev->status);
+		return 1;
+	}
+#else
+	/* This is a Windows scheme of initialization sequence, with double
+	 * reset of the device (Linux uses the same sequence)
+	 * Some equipment is said to work only with such init sequence; this
+	 * patch is based on the work by Alan Stern:
+	 * http://sourceforge.net/mailarchive/forum.php?
+	 * thread_id=5729457&forum_id=5398
 	 */
-	int j;
 	struct usb_device_descriptor *desc;
 	int port = -1;
 	struct usb_device *parent = dev->parent;
@@ -741,21 +805,26 @@ int usb_new_device(struct usb_device *dev)
 	/* send 64-byte GET-DEVICE-DESCRIPTOR request.  Since the descriptor is
 	 * only 18 bytes long, this will terminate with a short packet.  But if
 	 * the maxpacket size is 8 or 16 the device may be waiting to transmit
-	 * some more. */
+	 * some more, or keeps on retransmitting the 8 byte header. */
 
 	desc = (struct usb_device_descriptor *)tmpbuf;
-	desc->bMaxPacketSize0 = 0;
-	for (j = 0; j < 3; ++j) {
-		err = usb_get_descriptor(dev, USB_DT_DEVICE, 0, desc, 64);
-		if (err < 0) {
-			USB_PRINTF("usb_new_device: 64 byte descr\n");
-			break;
-		}
+	dev->descriptor.bMaxPacketSize0 = 64;	    /* Start off at 64 bytes  */
+	/* Default to 64 byte max packet size */
+	dev->maxpacketsize = PACKET_SIZE_64;
+	dev->epmaxpacketin[0] = 64;
+	dev->epmaxpacketout[0] = 64;
+
+	err = usb_get_descriptor(dev, USB_DT_DEVICE, 0, desc, 64);
+	if (err < 0) {
+		USB_PRINTF("usb_new_device: usb_get_descriptor() failed\n");
+		return 1;
 	}
+
 	dev->descriptor.bMaxPacketSize0 = desc->bMaxPacketSize0;
 
 	/* find the port number we're at */
 	if (parent) {
+		int j;
 
 		for (j = 0; j < parent->maxchild; j++) {
 			if (parent->children[j] == dev) {
@@ -764,7 +833,7 @@ int usb_new_device(struct usb_device *dev)
 			}
 		}
 		if (port < 0) {
-			printf("usb_new_device: cannot locate device's port..\n");
+			printf("usb_new_device:cannot locate device's port.\n");
 			return 1;
 		}
 
@@ -775,29 +844,31 @@ int usb_new_device(struct usb_device *dev)
 			return 1;
 		}
 	}
-#else
-	/* and this is the old and known way of initializing devices */
-	err = usb_get_descriptor(dev, USB_DT_DEVICE, 0, &dev->descriptor, 8);
-	if (err < 8) {
-		printf("\n      USB device not responding, giving up (status=%lX)\n",dev->status);
-		return 1;
-	}
 #endif
 
-	dev->epmaxpacketin [0] = dev->descriptor.bMaxPacketSize0;
+	dev->epmaxpacketin[0] = dev->descriptor.bMaxPacketSize0;
 	dev->epmaxpacketout[0] = dev->descriptor.bMaxPacketSize0;
 	switch (dev->descriptor.bMaxPacketSize0) {
-		case 8: dev->maxpacketsize = 0; break;
-		case 16: dev->maxpacketsize = 1; break;
-		case 32: dev->maxpacketsize = 2; break;
-		case 64: dev->maxpacketsize = 3; break;
+	case 8:
+		dev->maxpacketsize  = PACKET_SIZE_8;
+		break;
+	case 16:
+		dev->maxpacketsize = PACKET_SIZE_16;
+		break;
+	case 32:
+		dev->maxpacketsize = PACKET_SIZE_32;
+		break;
+	case 64:
+		dev->maxpacketsize = PACKET_SIZE_64;
+		break;
 	}
 	dev->devnum = addr;
 
 	err = usb_set_address(dev); /* set address */
 
 	if (err < 0) {
-		printf("\n      USB device not accepting new address (error=%lX)\n", dev->status);
+		printf("\n      USB device not accepting new address " \
+			"(error=%lX)\n", dev->status);
 		return 1;
 	}
 
@@ -805,12 +876,15 @@ int usb_new_device(struct usb_device *dev)
 
 	tmp = sizeof(dev->descriptor);
 
-	err = usb_get_descriptor(dev, USB_DT_DEVICE, 0, &dev->descriptor, sizeof(dev->descriptor));
+	err = usb_get_descriptor(dev, USB_DT_DEVICE, 0,
+				 &dev->descriptor, sizeof(dev->descriptor));
 	if (err < tmp) {
 		if (err < 0)
-			printf("unable to get device descriptor (error=%d)\n",err);
+			printf("unable to get device descriptor (error=%d)\n",
+			       err);
 		else
-			printf("USB device descriptor short read (expected %i, got %i)\n",tmp,err);
+			printf("USB device descriptor short read " \
+				"(expected %i, got %i)\n", tmp, err);
 		return 1;
 	}
 	/* correct le values */
@@ -819,30 +893,35 @@ int usb_new_device(struct usb_device *dev)
 	le16_to_cpus(&dev->descriptor.idProduct);
 	le16_to_cpus(&dev->descriptor.bcdDevice);
 	/* only support for one config for now */
-	usb_get_configuration_no(dev,&tmpbuf[0],0);
-	usb_parse_config(dev,&tmpbuf[0],0);
+	usb_get_configuration_no(dev, &tmpbuf[0], 0);
+	usb_parse_config(dev, &tmpbuf[0], 0);
 	usb_set_maxpacket(dev);
 	/* we set the default configuration here */
 	if (usb_set_configuration(dev, dev->config.bConfigurationValue)) {
-		printf("failed to set default configuration len %d, status %lX\n",dev->act_len,dev->status);
+		printf("failed to set default configuration " \
+			"len %d, status %lX\n", dev->act_len, dev->status);
 		return -1;
 	}
 	USB_PRINTF("new device strings: Mfr=%d, Product=%d, SerialNumber=%d\n",
-		dev->descriptor.iManufacturer, dev->descriptor.iProduct, dev->descriptor.iSerialNumber);
+		   dev->descriptor.iManufacturer, dev->descriptor.iProduct,
+		   dev->descriptor.iSerialNumber);
 	memset(dev->mf, 0, sizeof(dev->mf));
 	memset(dev->prod, 0, sizeof(dev->prod));
 	memset(dev->serial, 0, sizeof(dev->serial));
 	if (dev->descriptor.iManufacturer)
-		usb_string(dev, dev->descriptor.iManufacturer, dev->mf, sizeof(dev->mf));
+		usb_string(dev, dev->descriptor.iManufacturer,
+			   dev->mf, sizeof(dev->mf));
 	if (dev->descriptor.iProduct)
-		usb_string(dev, dev->descriptor.iProduct, dev->prod, sizeof(dev->prod));
+		usb_string(dev, dev->descriptor.iProduct,
+			   dev->prod, sizeof(dev->prod));
 	if (dev->descriptor.iSerialNumber)
-		usb_string(dev, dev->descriptor.iSerialNumber, dev->serial, sizeof(dev->serial));
+		usb_string(dev, dev->descriptor.iSerialNumber,
+			   dev->serial, sizeof(dev->serial));
 	USB_PRINTF("Manufacturer %s\n", dev->mf);
 	USB_PRINTF("Product      %s\n", dev->prod);
 	USB_PRINTF("SerialNumber %s\n", dev->serial);
 	/* now prode if the device is a hub */
-	usb_hub_probe(dev,0);
+	usb_hub_probe(dev, 0);
 	return 0;
 }
 
@@ -853,15 +932,15 @@ void usb_scan_devices(void)
 	struct usb_device *dev;
 
 	/* first make all devices unknown */
-	for(i=0;i<USB_MAX_DEVICE;i++) {
-		memset(&usb_dev[i],0,sizeof(struct usb_device));
+	for (i = 0; i < USB_MAX_DEVICE; i++) {
+		memset(&usb_dev[i], 0, sizeof(struct usb_device));
 		usb_dev[i].devnum = -1;
 	}
-	dev_index=0;
+	dev_index = 0;
 	/* device 0 is always present (root hub, so let it analyze) */
-	dev=usb_alloc_new_device();
+	dev = usb_alloc_new_device();
 	usb_new_device(dev);
-	printf("%d USB Device(s) found\n",dev_index);
+	printf("%d USB Device(s) found\n", dev_index);
 	/* insert "driver" if possible */
 #ifdef CONFIG_USB_KEYBOARD
 	drv_usb_kbd_init();
@@ -878,9 +957,9 @@ void usb_scan_devices(void)
 #undef	USB_HUB_DEBUG
 
 #ifdef	USB_HUB_DEBUG
-#define	USB_HUB_PRINTF(fmt,args...)	printf (fmt ,##args)
+#define	USB_HUB_PRINTF(fmt, args...)	printf(fmt , ##args)
 #else
-#define USB_HUB_PRINTF(fmt,args...)
+#define USB_HUB_PRINTF(fmt, args...)
 #endif
 
 
@@ -898,19 +977,22 @@ int usb_get_hub_descriptor(struct usb_device *dev, void *data, int size)
 int usb_clear_hub_feature(struct usb_device *dev, int feature)
 {
 	return usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
-		USB_REQ_CLEAR_FEATURE, USB_RT_HUB, feature, 0, NULL, 0, USB_CNTL_TIMEOUT);
+				USB_REQ_CLEAR_FEATURE, USB_RT_HUB, feature,
+				0, NULL, 0, USB_CNTL_TIMEOUT);
 }
 
 int usb_clear_port_feature(struct usb_device *dev, int port, int feature)
 {
 	return usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
-		USB_REQ_CLEAR_FEATURE, USB_RT_PORT, feature, port, NULL, 0, USB_CNTL_TIMEOUT);
+				USB_REQ_CLEAR_FEATURE, USB_RT_PORT, feature,
+				port, NULL, 0, USB_CNTL_TIMEOUT);
 }
 
 int usb_set_port_feature(struct usb_device *dev, int port, int feature)
 {
 	return usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
-		USB_REQ_SET_FEATURE, USB_RT_PORT, feature, port, NULL, 0, USB_CNTL_TIMEOUT);
+				USB_REQ_SET_FEATURE, USB_RT_PORT, feature,
+				port, NULL, 0, USB_CNTL_TIMEOUT);
 }
 
 int usb_get_hub_status(struct usb_device *dev, void *data)
@@ -933,27 +1015,27 @@ static void usb_hub_power_on(struct usb_hub_device *hub)
 	int i;
 	struct usb_device *dev;
 
-	dev=hub->pusb_dev;
+	dev = hub->pusb_dev;
 	/* Enable power to the ports */
 	USB_HUB_PRINTF("enabling power on all ports\n");
 	for (i = 0; i < dev->maxchild; i++) {
 		usb_set_port_feature(dev, i + 1, USB_PORT_FEAT_POWER);
-		USB_HUB_PRINTF("port %d returns %lX\n",i+1,dev->status);
+		USB_HUB_PRINTF("port %d returns %lX\n", i + 1, dev->status);
 		wait_ms(hub->desc.bPwrOn2PwrGood * 2);
 	}
 }
 
 void usb_hub_reset(void)
 {
-	usb_hub_index=0;
+	usb_hub_index = 0;
 }
 
 struct usb_hub_device *usb_hub_allocate(void)
 {
-	if(usb_hub_index<USB_MAX_HUB) {
+	if (usb_hub_index < USB_MAX_HUB)
 		return &hub_dev[usb_hub_index++];
-	}
-	printf("ERROR: USB_MAX_HUB (%d) reached\n",USB_MAX_HUB);
+
+	printf("ERROR: USB_MAX_HUB (%d) reached\n", USB_MAX_HUB);
 	return NULL;
 }
 
@@ -966,39 +1048,42 @@ static int hub_port_reset(struct usb_device *dev, int port,
 	struct usb_port_status portsts;
 	unsigned short portstatus, portchange;
 
-
 	USB_HUB_PRINTF("hub_port_reset: resetting port %d...\n", port);
-	for(tries=0;tries<MAX_TRIES;tries++) {
+	for (tries = 0; tries < MAX_TRIES; tries++) {
 
 		usb_set_port_feature(dev, port + 1, USB_PORT_FEAT_RESET);
 		wait_ms(200);
 
-		if (usb_get_port_status(dev, port + 1, &portsts)<0) {
-			USB_HUB_PRINTF("get_port_status failed status %lX\n",dev->status);
+		if (usb_get_port_status(dev, port + 1, &portsts) < 0) {
+			USB_HUB_PRINTF("get_port_status failed status %lX\n",
+					dev->status);
 			return -1;
 		}
 		portstatus = le16_to_cpu(portsts.wPortStatus);
 		portchange = le16_to_cpu(portsts.wPortChange);
-		USB_HUB_PRINTF("portstatus %x, change %x, %s\n", portstatus ,portchange,
-			portstatus&(1<<USB_PORT_FEAT_LOWSPEED) ? "Low Speed" : "High Speed");
-		USB_HUB_PRINTF("STAT_C_CONNECTION = %d STAT_CONNECTION = %d  USB_PORT_STAT_ENABLE %d\n",
+		USB_HUB_PRINTF("portstatus %x, change %x, %s\n",
+				portstatus, portchange,
+				portstatus&(1<<USB_PORT_FEAT_LOWSPEED) ? \
+						"Low Speed" : "High Speed");
+		USB_HUB_PRINTF("STAT_C_CONNECTION = %d STAT_CONNECTION = %d" \
+			       "  USB_PORT_STAT_ENABLE %d\n",
 			(portchange & USB_PORT_STAT_C_CONNECTION) ? 1 : 0,
 			(portstatus & USB_PORT_STAT_CONNECTION) ? 1 : 0,
 			(portstatus & USB_PORT_STAT_ENABLE) ? 1 : 0);
+
 		if ((portchange & USB_PORT_STAT_C_CONNECTION) ||
 		    !(portstatus & USB_PORT_STAT_CONNECTION))
 			return -1;
 
-		if (portstatus & USB_PORT_STAT_ENABLE) {
-
+		if (portstatus & USB_PORT_STAT_ENABLE)
 			break;
-		}
 
 		wait_ms(200);
 	}
 
-	if (tries==MAX_TRIES) {
-		USB_HUB_PRINTF("Cannot enable port %i after %i retries, disabling port.\n", port+1, MAX_TRIES);
+	if (tries == MAX_TRIES) {
+		USB_HUB_PRINTF("Cannot enable port %i after %i retries, " \
+				"disabling port.\n", port + 1, MAX_TRIES);
 		USB_HUB_PRINTF("Maybe the USB cable is bad?\n");
 		return -1;
 	}
@@ -1006,7 +1091,6 @@ static int hub_port_reset(struct usb_device *dev, int port,
 	usb_clear_port_feature(dev, port + 1, USB_PORT_FEAT_C_RESET);
 	*portstat = portstatus;
 	return 0;
-
 }
 
 
@@ -1017,22 +1101,24 @@ void usb_hub_port_connect_change(struct usb_device *dev, int port)
 	unsigned short portstatus, portchange;
 
 	/* Check status */
-	if (usb_get_port_status(dev, port + 1, &portsts)<0) {
+	if (usb_get_port_status(dev, port + 1, &portsts) < 0) {
 		USB_HUB_PRINTF("get_port_status failed\n");
 		return;
 	}
 
 	portstatus = le16_to_cpu(portsts.wPortStatus);
 	portchange = le16_to_cpu(portsts.wPortChange);
-	USB_HUB_PRINTF("portstatus %x, change %x, %s\n", portstatus, portchange,
-		portstatus&(1<<USB_PORT_FEAT_LOWSPEED) ? "Low Speed" : "High Speed");
+	USB_HUB_PRINTF("portstatus %x, change %x, %s\n",
+			portstatus, portchange,
+			portstatus&(1 << USB_PORT_FEAT_LOWSPEED) ? \
+						"Low Speed" : "High Speed");
 
 	/* Clear the connection change status */
 	usb_clear_port_feature(dev, port + 1, USB_PORT_FEAT_C_CONNECTION);
 
 	/* Disconnect any existing devices under this port */
 	if (((!(portstatus & USB_PORT_STAT_CONNECTION)) &&
-	     (!(portstatus & USB_PORT_STAT_ENABLE)))|| (dev->children[port])) {
+	     (!(portstatus & USB_PORT_STAT_ENABLE))) || (dev->children[port])) {
 		USB_HUB_PRINTF("usb_disconnect(&hub->children[port]);\n");
 		/* Return now if nothing is connected */
 		if (!(portstatus & USB_PORT_STAT_CONNECTION))
@@ -1049,11 +1135,11 @@ void usb_hub_port_connect_change(struct usb_device *dev, int port)
 	wait_ms(200);
 
 	/* Allocate a new device struct for it */
-	usb=usb_alloc_new_device();
+	usb = usb_alloc_new_device();
 	usb->slow = (portstatus & USB_PORT_STAT_LOW_SPEED) ? 1 : 0;
 
 	dev->children[port] = usb;
-	usb->parent=dev;
+	usb->parent = dev;
 	/* Run it through the hoops (find a driver, etc) */
 	if (usb_new_device(usb)) {
 		/* Woops, disable the port */
@@ -1072,13 +1158,14 @@ int usb_hub_configure(struct usb_device *dev)
 	struct usb_hub_device *hub;
 
 	/* "allocate" Hub device */
-	hub=usb_hub_allocate();
-	if(hub==NULL)
+	hub = usb_hub_allocate();
+	if (hub == NULL)
 		return -1;
-	hub->pusb_dev=dev;
+	hub->pusb_dev = dev;
 	/* Get the the hub descriptor */
 	if (usb_get_hub_descriptor(dev, buffer, 4) < 0) {
-		USB_HUB_PRINTF("usb_hub_configure: failed to get hub descriptor, giving up %lX\n",dev->status);
+		USB_HUB_PRINTF("usb_hub_configure: failed to get hub " \
+				   "descriptor, giving up %lX\n", dev->status);
 		return -1;
 	}
 	descriptor = (struct usb_hub_descriptor *)buffer;
@@ -1086,43 +1173,48 @@ int usb_hub_configure(struct usb_device *dev)
 	/* silence compiler warning if USB_BUFSIZ is > 256 [= sizeof(char)] */
 	i = descriptor->bLength;
 	if (i > USB_BUFSIZ) {
-		USB_HUB_PRINTF("usb_hub_configure: failed to get hub descriptor - too long: %d\n",
-			descriptor->bLength);
+		USB_HUB_PRINTF("usb_hub_configure: failed to get hub " \
+				"descriptor - too long: %d\n",
+				descriptor->bLength);
 		return -1;
 	}
 
 	if (usb_get_hub_descriptor(dev, buffer, descriptor->bLength) < 0) {
-		USB_HUB_PRINTF("usb_hub_configure: failed to get hub descriptor 2nd giving up %lX\n",dev->status);
+		USB_HUB_PRINTF("usb_hub_configure: failed to get hub " \
+				"descriptor 2nd giving up %lX\n", dev->status);
 		return -1;
 	}
-	memcpy((unsigned char *)&hub->desc,buffer,descriptor->bLength);
+	memcpy((unsigned char *)&hub->desc, buffer, descriptor->bLength);
 	/* adjust 16bit values */
-	hub->desc.wHubCharacteristics = le16_to_cpu(descriptor->wHubCharacteristics);
+	hub->desc.wHubCharacteristics =
+				le16_to_cpu(descriptor->wHubCharacteristics);
 	/* set the bitmap */
-	bitmap=(unsigned char *)&hub->desc.DeviceRemovable[0];
-	memset(bitmap,0xff,(USB_MAXCHILDREN+1+7)/8); /* devices not removable by default */
-	bitmap=(unsigned char *)&hub->desc.PortPowerCtrlMask[0];
-	memset(bitmap,0xff,(USB_MAXCHILDREN+1+7)/8); /* PowerMask = 1B */
-	for(i=0;i<((hub->desc.bNbrPorts + 1 + 7)/8);i++) {
-		hub->desc.DeviceRemovable[i]=descriptor->DeviceRemovable[i];
-	}
-	for(i=0;i<((hub->desc.bNbrPorts + 1 + 7)/8);i++) {
-		hub->desc.DeviceRemovable[i]=descriptor->PortPowerCtrlMask[i];
-	}
+	bitmap = (unsigned char *)&hub->desc.DeviceRemovable[0];
+	/* devices not removable by default */
+	memset(bitmap, 0xff, (USB_MAXCHILDREN+1+7)/8);
+	bitmap = (unsigned char *)&hub->desc.PortPowerCtrlMask[0];
+	memset(bitmap, 0xff, (USB_MAXCHILDREN+1+7)/8); /* PowerMask = 1B */
+
+	for (i = 0; i < ((hub->desc.bNbrPorts + 1 + 7)/8); i++)
+		hub->desc.DeviceRemovable[i] = descriptor->DeviceRemovable[i];
+
+	for (i = 0; i < ((hub->desc.bNbrPorts + 1 + 7)/8); i++)
+		hub->desc.DeviceRemovable[i] = descriptor->PortPowerCtrlMask[i];
+
 	dev->maxchild = descriptor->bNbrPorts;
 	USB_HUB_PRINTF("%d ports detected\n", dev->maxchild);
 
 	switch (hub->desc.wHubCharacteristics & HUB_CHAR_LPSM) {
-		case 0x00:
-			USB_HUB_PRINTF("ganged power switching\n");
-			break;
-		case 0x01:
-			USB_HUB_PRINTF("individual port power switching\n");
-			break;
-		case 0x02:
-		case 0x03:
-			USB_HUB_PRINTF("unknown reserved power switching mode\n");
-			break;
+	case 0x00:
+		USB_HUB_PRINTF("ganged power switching\n");
+		break;
+	case 0x01:
+		USB_HUB_PRINTF("individual port power switching\n");
+		break;
+	case 0x02:
+	case 0x03:
+		USB_HUB_PRINTF("unknown reserved power switching mode\n");
+		break;
 	}
 
 	if (hub->desc.wHubCharacteristics & HUB_CHAR_COMPOUND)
@@ -1131,40 +1223,52 @@ int usb_hub_configure(struct usb_device *dev)
 		USB_HUB_PRINTF("standalone hub\n");
 
 	switch (hub->desc.wHubCharacteristics & HUB_CHAR_OCPM) {
-		case 0x00:
-			USB_HUB_PRINTF("global over-current protection\n");
-			break;
-		case 0x08:
-			USB_HUB_PRINTF("individual port over-current protection\n");
-			break;
-		case 0x10:
-		case 0x18:
-			USB_HUB_PRINTF("no over-current protection\n");
-      break;
+	case 0x00:
+		USB_HUB_PRINTF("global over-current protection\n");
+		break;
+	case 0x08:
+		USB_HUB_PRINTF("individual port over-current protection\n");
+		break;
+	case 0x10:
+	case 0x18:
+		USB_HUB_PRINTF("no over-current protection\n");
+		break;
 	}
-	USB_HUB_PRINTF("power on to power good time: %dms\n", descriptor->bPwrOn2PwrGood * 2);
-	USB_HUB_PRINTF("hub controller current requirement: %dmA\n", descriptor->bHubContrCurrent);
+
+	USB_HUB_PRINTF("power on to power good time: %dms\n",
+			descriptor->bPwrOn2PwrGood * 2);
+	USB_HUB_PRINTF("hub controller current requirement: %dmA\n",
+			descriptor->bHubContrCurrent);
+
 	for (i = 0; i < dev->maxchild; i++)
 		USB_HUB_PRINTF("port %d is%s removable\n", i + 1,
-			hub->desc.DeviceRemovable[(i + 1)/8] & (1 << ((i + 1)%8)) ? " not" : "");
+			hub->desc.DeviceRemovable[(i + 1) / 8] & \
+					   (1 << ((i + 1) % 8)) ? " not" : "");
+
 	if (sizeof(struct usb_hub_status) > USB_BUFSIZ) {
-		USB_HUB_PRINTF("usb_hub_configure: failed to get Status - too long: %d\n",
-			descriptor->bLength);
+		USB_HUB_PRINTF("usb_hub_configure: failed to get Status - " \
+				"too long: %d\n", descriptor->bLength);
 		return -1;
 	}
 
 	if (usb_get_hub_status(dev, buffer) < 0) {
-		USB_HUB_PRINTF("usb_hub_configure: failed to get Status %lX\n",dev->status);
+		USB_HUB_PRINTF("usb_hub_configure: failed to get Status %lX\n",
+				dev->status);
 		return -1;
 	}
+
 	hubsts = (struct usb_hub_status *)buffer;
 	USB_HUB_PRINTF("get_hub_status returned status %X, change %X\n",
-		le16_to_cpu(hubsts->wHubStatus),le16_to_cpu(hubsts->wHubChange));
+			le16_to_cpu(hubsts->wHubStatus),
+			le16_to_cpu(hubsts->wHubChange));
 	USB_HUB_PRINTF("local power source is %s\n",
-		(le16_to_cpu(hubsts->wHubStatus) & HUB_STATUS_LOCAL_POWER) ? "lost (inactive)" : "good");
+		(le16_to_cpu(hubsts->wHubStatus) & HUB_STATUS_LOCAL_POWER) ? \
+		"lost (inactive)" : "good");
 	USB_HUB_PRINTF("%sover-current condition exists\n",
-		(le16_to_cpu(hubsts->wHubStatus) & HUB_STATUS_OVERCURRENT) ? "" : "no ");
+		(le16_to_cpu(hubsts->wHubStatus) & HUB_STATUS_OVERCURRENT) ? \
+		"" : "no ");
 	usb_hub_power_on(hub);
+
 	for (i = 0; i < dev->maxchild; i++) {
 		struct usb_port_status portsts;
 		unsigned short portstatus, portchange;
@@ -1173,41 +1277,51 @@ int usb_hub_configure(struct usb_device *dev)
 			USB_HUB_PRINTF("get_port_status failed\n");
 			continue;
 		}
+
 		portstatus = le16_to_cpu(portsts.wPortStatus);
 		portchange = le16_to_cpu(portsts.wPortChange);
-		USB_HUB_PRINTF("Port %d Status %X Change %X\n",i+1,portstatus,portchange);
+		USB_HUB_PRINTF("Port %d Status %X Change %X\n",
+				i + 1, portstatus, portchange);
+
 		if (portchange & USB_PORT_STAT_C_CONNECTION) {
 			USB_HUB_PRINTF("port %d connection change\n", i + 1);
 			usb_hub_port_connect_change(dev, i);
 		}
 		if (portchange & USB_PORT_STAT_C_ENABLE) {
-			USB_HUB_PRINTF("port %d enable change, status %x\n", i + 1, portstatus);
-			usb_clear_port_feature(dev, i + 1, USB_PORT_FEAT_C_ENABLE);
-
-			/* EM interference sometimes causes bad shielded USB devices to
-			 * be shutdown by the hub, this hack enables them again.
-			 * Works at least with mouse driver */
+			USB_HUB_PRINTF("port %d enable change, status %x\n",
+					i + 1, portstatus);
+			usb_clear_port_feature(dev, i + 1,
+						USB_PORT_FEAT_C_ENABLE);
+
+			/* EM interference sometimes causes bad shielded USB
+			 * devices to be shutdown by the hub, this hack enables
+			 * them again. Works at least with mouse driver */
 			if (!(portstatus & USB_PORT_STAT_ENABLE) &&
-				(portstatus & USB_PORT_STAT_CONNECTION) && (dev->children[i])) {
-				USB_HUB_PRINTF("already running port %i disabled by hub (EMI?), re-enabling...\n",
-					i + 1);
+			     (portstatus & USB_PORT_STAT_CONNECTION) &&
+			     ((dev->children[i]))) {
+				USB_HUB_PRINTF("already running port %i "  \
+						"disabled by hub (EMI?), " \
+						"re-enabling...\n", i + 1);
 					usb_hub_port_connect_change(dev, i);
 			}
 		}
 		if (portstatus & USB_PORT_STAT_SUSPEND) {
 			USB_HUB_PRINTF("port %d suspend change\n", i + 1);
-			usb_clear_port_feature(dev, i + 1,  USB_PORT_FEAT_SUSPEND);
+			usb_clear_port_feature(dev, i + 1,
+						USB_PORT_FEAT_SUSPEND);
 		}
 
 		if (portchange & USB_PORT_STAT_C_OVERCURRENT) {
 			USB_HUB_PRINTF("port %d over-current change\n", i + 1);
-			usb_clear_port_feature(dev, i + 1, USB_PORT_FEAT_C_OVER_CURRENT);
+			usb_clear_port_feature(dev, i + 1,
+						USB_PORT_FEAT_C_OVER_CURRENT);
 			usb_hub_power_on(hub);
 		}
 
 		if (portchange & USB_PORT_STAT_C_RESET) {
 			USB_HUB_PRINTF("port %d reset change\n", i + 1);
-			usb_clear_port_feature(dev, i + 1, USB_PORT_FEAT_C_RESET);
+			usb_clear_port_feature(dev, i + 1,
+						USB_PORT_FEAT_C_RESET);
 		}
 	} /* end for i all ports */
 
@@ -1241,7 +1355,7 @@ int usb_hub_probe(struct usb_device *dev, int ifnum)
 		return 0;
 	/* We found a hub */
 	USB_HUB_PRINTF("USB hub found\n");
-	ret=usb_hub_configure(dev);
+	ret = usb_hub_configure(dev);
 	return ret;
 }
 
diff --git a/common/usb_kbd.c b/common/usb_kbd.c
index 108bd60f9..cf1456095 100644
--- a/common/usb_kbd.c
+++ b/common/usb_kbd.c
@@ -36,7 +36,7 @@
  * are switched to the serial port, else the settings in the
  * environment are used
  */
-#ifdef CFG_CONSOLE_OVERWRITE_ROUTINE
+#ifdef CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
 extern int overwrite_console (void);
 #else
 int overwrite_console (void)
@@ -120,7 +120,7 @@ static void usb_kbd_put_queue(char data)
 /* test if a character is in the queue */
 static int usb_kbd_testc(void)
 {
-#ifdef CFG_USB_EVENT_POLL
+#ifdef CONFIG_SYS_USB_EVENT_POLL
 	usb_event_poll();
 #endif
 	if(usb_in_pointer==usb_out_pointer)
@@ -133,7 +133,7 @@ static int usb_kbd_getc(void)
 {
 	char c;
 	while(usb_in_pointer==usb_out_pointer) {
-#ifdef CFG_USB_EVENT_POLL
+#ifdef CONFIG_SYS_USB_EVENT_POLL
 		usb_event_poll();
 #endif
 	}
@@ -162,6 +162,8 @@ int drv_usb_kbd_init(void)
 	/* scan all USB Devices */
 	for(i=0;i<USB_MAX_DEVICE;i++) {
 		dev=usb_get_dev_index(i); /* get device */
+		if(dev == NULL)
+			return -1;
 		if(dev->devnum!=-1) {
 			if(usb_kbd_probe(dev,0)==1) { /* Ok, we found a keyboard */
 				/* check, if it is already registered */
diff --git a/config.mk b/config.mk
index 1dac29be5..d770f09f9 100644
--- a/config.mk
+++ b/config.mk
@@ -44,37 +44,8 @@ PLATFORM_RELFLAGS =
 PLATFORM_CPPFLAGS =
 PLATFORM_LDFLAGS =
 
-#
-# When cross-compiling on NetBSD, we have to define __PPC__ or else we
-# will pick up a va_list declaration that is incompatible with the
-# actual argument lists emitted by the compiler.
-#
-# [Tested on NetBSD/i386 1.5 + cross-powerpc-netbsd-1.3]
-
-ifeq ($(ARCH),ppc)
-ifeq ($(CROSS_COMPILE),powerpc-netbsd-)
-PLATFORM_CPPFLAGS+= -D__PPC__
-endif
-ifeq ($(CROSS_COMPILE),powerpc-openbsd-)
-PLATFORM_CPPFLAGS+= -D__PPC__
-endif
-endif
-
-ifeq ($(ARCH),arm)
-ifeq ($(CROSS_COMPILE),powerpc-netbsd-)
-PLATFORM_CPPFLAGS+= -D__ARM__
-endif
-ifeq ($(CROSS_COMPILE),powerpc-openbsd-)
-PLATFORM_CPPFLAGS+= -D__ARM__
-endif
-endif
-
 #########################################################################
 
-CONFIG_SHELL	:= $(shell if [ -x "$$BASH" ]; then echo $$BASH; \
-		    else if [ -x /bin/bash ]; then echo /bin/bash; \
-		    else echo sh; fi ; fi)
-
 ifeq ($(HOSTOS)-$(HOSTARCH),darwin-ppc)
 HOSTCC		= cc
 else
@@ -229,9 +200,8 @@ endif
 
 #########################################################################
 
-export	CONFIG_SHELL HPATH HOSTCC HOSTCFLAGS CROSS_COMPILE \
-	AS LD CC CPP AR NM STRIP OBJCOPY OBJDUMP \
-	MAKE
+export	HPATH HOSTCC HOSTCFLAGS CROSS_COMPILE \
+	AS LD CC CPP AR NM STRIP OBJCOPY OBJDUMP MAKE
 export	TEXT_BASE PLATFORM_CPPFLAGS PLATFORM_RELFLAGS CPPFLAGS CFLAGS AFLAGS
 
 #########################################################################
diff --git a/cpu/74xx_7xx/cache.S b/cpu/74xx_7xx/cache.S
index eac4544ef..66c72983d 100644
--- a/cpu/74xx_7xx/cache.S
+++ b/cpu/74xx_7xx/cache.S
@@ -52,7 +52,7 @@ _GLOBAL(invalidate_l1_data_cache)
 /*
  * Flush data cache.
  */
-_GLOBAL(flush_data_cache)
+_GLOBAL(flush_dcache)
 	lis	r3,0
 	lis	r5,CACHE_LINE_SIZE
 flush:
@@ -292,7 +292,7 @@ _GLOBAL(dcache_enable)
 	mtspr	HID0, r5		/* enable + invalidate */
 	mtspr	HID0, r3		/* enable */
 	sync
-#ifdef CFG_L2
+#ifdef CONFIG_SYS_L2
 	mflr	r5
 	bl	l2cache_enable		/* uses r3 and r4 */
 	sync
@@ -303,12 +303,12 @@ _GLOBAL(dcache_enable)
 
 /*
  * Disable data cache(s) - L1 and optionally L2
- * Calls flush_data_cache and l2cache_disable_no_flush.
+ * Calls flush_dcache and l2cache_disable_no_flush.
  * LR saved in r4
  */
 _GLOBAL(dcache_disable)
 	mflr	r4			/* save link register */
-	bl	flush_data_cache	/* uses r3 and r5 */
+	bl	flush_dcache	/* uses r3 and r5 */
 	sync
 	mfspr	r3, HID0
 	li	r5, HID0_DCFI|HID0_DLOCK
@@ -318,7 +318,7 @@ _GLOBAL(dcache_disable)
 	andc	r3, r3, r5		/* no enable, no invalidate */
 	mtspr	HID0, r3
 	sync
-#ifdef CFG_L2
+#ifdef CONFIG_SYS_L2
 	bl	l2cache_disable_no_flush /* uses r3 */
 #endif
 	mtlr	r4			/* restore link register */
@@ -389,11 +389,11 @@ _GLOBAL(l2cache_enable)
 
 /*
  * Disable L2 cache
- * Calls flush_data_cache. LR is saved in r4
+ * Calls flush_dcache. LR is saved in r4
  */
 _GLOBAL(l2cache_disable)
 	mflr	r4			/* save link register */
-	bl	flush_data_cache	/* uses r3 and r5 */
+	bl	flush_dcache		/* uses r3 and r5 */
 	sync
 	mtlr	r4			/* restore link register */
 l2cache_disable_no_flush:		/* provide way to disable L2 w/o flushing */
diff --git a/cpu/74xx_7xx/cpu.c b/cpu/74xx_7xx/cpu.c
index c007abc98..3c172779b 100644
--- a/cpu/74xx_7xx/cpu.c
+++ b/cpu/74xx_7xx/cpu.c
@@ -256,16 +256,16 @@ do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 	__asm__ __volatile__ ("isync");
 	__asm__ __volatile__ ("sync");
 
-#ifdef CFG_RESET_ADDRESS
-	addr = CFG_RESET_ADDRESS;
+#ifdef CONFIG_SYS_RESET_ADDRESS
+	addr = CONFIG_SYS_RESET_ADDRESS;
 #else
 	/*
-	 * note: when CFG_MONITOR_BASE points to a RAM address,
-	 * CFG_MONITOR_BASE - sizeof (ulong) is usually a valid
+	 * note: when CONFIG_SYS_MONITOR_BASE points to a RAM address,
+	 * CONFIG_SYS_MONITOR_BASE - sizeof (ulong) is usually a valid
 	 * address. Better pick an address known to be invalid on your
-	 * system and assign it to CFG_RESET_ADDRESS.
+	 * system and assign it to CONFIG_SYS_RESET_ADDRESS.
 	 */
-	addr = CFG_MONITOR_BASE - sizeof (ulong);
+	addr = CONFIG_SYS_MONITOR_BASE - sizeof (ulong);
 #endif
 	soft_restart(addr);
 	while(1);	/* not reached */
@@ -277,18 +277,18 @@ do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 /*
  * For the 7400 the TB clock runs at 1/4 the cpu bus speed.
  */
-#if defined(CONFIG_AMIGAONEG3SE) || defined(CFG_CONFIG_BUS_CLK)
+#if defined(CONFIG_AMIGAONEG3SE) || defined(CONFIG_SYS_CONFIG_BUS_CLK)
 unsigned long get_tbclk(void)
 {
 	return (gd->bus_clk / 4);
 }
-#else	/* ! CONFIG_AMIGAONEG3SE and !CFG_CONFIG_BUS_CLK*/
+#else	/* ! CONFIG_AMIGAONEG3SE and !CONFIG_SYS_CONFIG_BUS_CLK*/
 
 unsigned long get_tbclk (void)
 {
-	return CFG_BUS_HZ / 4;
+	return CONFIG_SYS_BUS_HZ / 4;
 }
-#endif	/* CONFIG_AMIGAONEG3SE or CFG_CONFIG_BUS_CLK*/
+#endif	/* CONFIG_AMIGAONEG3SE or CONFIG_SYS_CONFIG_BUS_CLK*/
 /* ------------------------------------------------------------------------- */
 #if defined(CONFIG_WATCHDOG)
 #if !defined(CONFIG_PCIPPC2) && !defined(CONFIG_BAB7xx)
diff --git a/cpu/74xx_7xx/interrupts.c b/cpu/74xx_7xx/interrupts.c
index f0ea48526..0ea1aec7a 100644
--- a/cpu/74xx_7xx/interrupts.c
+++ b/cpu/74xx_7xx/interrupts.c
@@ -48,7 +48,7 @@ int interrupt_init_cpu (unsigned *decrementer_count)
 	       GTREGREAD(ETHERNET2_INTERRUPT_MASK_REGISTER));
 	puts("interrupt_init: setting decrementer_count\n");
 #endif
-	*decrementer_count = get_tbclk() / CFG_HZ;
+	*decrementer_count = get_tbclk() / CONFIG_SYS_HZ;
 
 	return (0);
 }
diff --git a/cpu/74xx_7xx/kgdb.S b/cpu/74xx_7xx/kgdb.S
index 4f231228c..ad487cdaf 100644
--- a/cpu/74xx_7xx/kgdb.S
+++ b/cpu/74xx_7xx/kgdb.S
@@ -43,7 +43,7 @@ kgdb_flush_cache_all:
 	addis	r4,r0,0x0040
 kgdb_flush_loop:
 	lwz	r5,0(r3)
-	addi	r3,r3,CFG_CACHELINE_SIZE
+	addi	r3,r3,CONFIG_SYS_CACHELINE_SIZE
 	cmp	0,0,r3,r4
 	bne	kgdb_flush_loop
 	SYNC
@@ -55,21 +55,21 @@ kgdb_flush_loop:
 
 	.globl	kgdb_flush_cache_range
 kgdb_flush_cache_range:
-	li	r5,CFG_CACHELINE_SIZE-1
+	li	r5,CONFIG_SYS_CACHELINE_SIZE-1
 	andc	r3,r3,r5
 	subf	r4,r3,r4
 	add	r4,r4,r5
-	srwi.	r4,r4,CFG_CACHELINE_SHIFT
+	srwi.	r4,r4,CONFIG_SYS_CACHELINE_SHIFT
 	beqlr
 	mtctr	r4
 	mr	r6,r3
 1:	dcbst	0,r3
-	addi	r3,r3,CFG_CACHELINE_SIZE
+	addi	r3,r3,CONFIG_SYS_CACHELINE_SIZE
 	bdnz	1b
 	sync				/* wait for dcbst's to get to ram */
 	mtctr	r4
 2:	icbi	0,r6
-	addi	r6,r6,CFG_CACHELINE_SIZE
+	addi	r6,r6,CONFIG_SYS_CACHELINE_SIZE
 	bdnz	2b
 	SYNC
 	blr
diff --git a/cpu/74xx_7xx/speed.c b/cpu/74xx_7xx/speed.c
index d8c40cea0..bc33a67be 100644
--- a/cpu/74xx_7xx/speed.c
+++ b/cpu/74xx_7xx/speed.c
@@ -127,8 +127,8 @@ int get_clocks (void)
 {
 	ulong clock = 0;
 
-#ifdef CFG_BUS_CLK
-	gd->bus_clk = CFG_BUS_CLK;	/* bus clock is a fixed frequency */
+#ifdef CONFIG_SYS_BUS_CLK
+	gd->bus_clk = CONFIG_SYS_BUS_CLK;	/* bus clock is a fixed frequency */
 #else
 	gd->bus_clk = get_board_bus_clk ();	/* bus clock is configurable */
 #endif
diff --git a/cpu/74xx_7xx/start.S b/cpu/74xx_7xx/start.S
index 42b0f72ac..792cd3085 100644
--- a/cpu/74xx_7xx/start.S
+++ b/cpu/74xx_7xx/start.S
@@ -34,6 +34,7 @@
  */
 #include <config.h>
 #include <74xx_7xx.h>
+#include <timestamp.h>
 #include <version.h>
 
 #include <ppc_asm.tmpl>
@@ -87,7 +88,7 @@
 	.globl	version_string
 version_string:
 	.ascii	U_BOOT_VERSION
-	.ascii	" (", __DATE__, " - ", __TIME__, ")"
+	.ascii	" (", U_BOOT_DATE, " - ", U_BOOT_TIME, ")"
 	.ascii	CONFIG_IDENT_STRING, "\0"
 
 	. = EXC_OFF_SYS_RESET
@@ -209,7 +210,7 @@ boot_warm:
 	bl	invalidate_bats
 	sync
 
-#ifdef CFG_L2
+#ifdef CONFIG_SYS_L2
 	/* init the L2 cache */
 	addis	r3, r0, L2_INIT@h
 	ori	r3, r3, L2_INIT@l
@@ -225,12 +226,12 @@ boot_warm:
 		 */
 #endif
 
-#ifdef CFG_L2
+#ifdef CONFIG_SYS_L2
 	/* invalidate the L2 cache */
 	bl	l2cache_invalidate
 	sync
 #endif
-#ifdef CFG_BOARD_ASM_INIT
+#ifdef CONFIG_SYS_BOARD_ASM_INIT
 	/* do early init */
 	bl	board_asm_init
 #endif
@@ -238,8 +239,8 @@ boot_warm:
 	/*
 	 * Calculate absolute address in FLASH and jump there
 	 *------------------------------------------------------*/
-	lis	r3, CFG_MONITOR_BASE@h
-	ori	r3, r3, CFG_MONITOR_BASE@l
+	lis	r3, CONFIG_SYS_MONITOR_BASE@h
+	ori	r3, r3, CONFIG_SYS_MONITOR_BASE@l
 	addi	r3, r3, in_flash - _start + EXC_OFF_SYS_RESET
 	mtlr	r3
 	blr
@@ -280,15 +281,15 @@ in_flash:
 	bl	l1dcache_enable
 	sync
 #endif
-#ifdef CFG_INIT_RAM_LOCK
+#ifdef CONFIG_SYS_INIT_RAM_LOCK
 	bl	lock_ram_in_cache
 	sync
 #endif
 
 	/* set up the stack pointer in our newly created
 	 * cache-ram (r1) */
-	lis	r1, (CFG_INIT_RAM_ADDR + CFG_GBL_DATA_OFFSET)@h
-	ori	r1, r1, (CFG_INIT_RAM_ADDR + CFG_GBL_DATA_OFFSET)@l
+	lis	r1, (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET)@h
+	ori	r1, r1, (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET)@l
 
 	li	r0, 0		/* Make room for stack frame header and	*/
 	stwu	r0, -4(r1)	/* clear final stack frame so that	*/
@@ -343,146 +344,146 @@ setup_bats:
 	addis	r0, r0, 0x0000
 
 	/* IBAT 0 */
-	addis	r4, r0, CFG_IBAT0L@h
-	ori	r4, r4, CFG_IBAT0L@l
-	addis	r3, r0, CFG_IBAT0U@h
-	ori	r3, r3, CFG_IBAT0U@l
+	addis	r4, r0, CONFIG_SYS_IBAT0L@h
+	ori	r4, r4, CONFIG_SYS_IBAT0L@l
+	addis	r3, r0, CONFIG_SYS_IBAT0U@h
+	ori	r3, r3, CONFIG_SYS_IBAT0U@l
 	mtspr	IBAT0L, r4
 	mtspr	IBAT0U, r3
 	isync
 
 	/* DBAT 0 */
-	addis	r4, r0, CFG_DBAT0L@h
-	ori	r4, r4, CFG_DBAT0L@l
-	addis	r3, r0, CFG_DBAT0U@h
-	ori	r3, r3, CFG_DBAT0U@l
+	addis	r4, r0, CONFIG_SYS_DBAT0L@h
+	ori	r4, r4, CONFIG_SYS_DBAT0L@l
+	addis	r3, r0, CONFIG_SYS_DBAT0U@h
+	ori	r3, r3, CONFIG_SYS_DBAT0U@l
 	mtspr	DBAT0L, r4
 	mtspr	DBAT0U, r3
 	isync
 
 	/* IBAT 1 */
-	addis	r4, r0, CFG_IBAT1L@h
-	ori	r4, r4, CFG_IBAT1L@l
-	addis	r3, r0, CFG_IBAT1U@h
-	ori	r3, r3, CFG_IBAT1U@l
+	addis	r4, r0, CONFIG_SYS_IBAT1L@h
+	ori	r4, r4, CONFIG_SYS_IBAT1L@l
+	addis	r3, r0, CONFIG_SYS_IBAT1U@h
+	ori	r3, r3, CONFIG_SYS_IBAT1U@l
 	mtspr	IBAT1L, r4
 	mtspr	IBAT1U, r3
 	isync
 
 	/* DBAT 1 */
-	addis	r4, r0, CFG_DBAT1L@h
-	ori	r4, r4, CFG_DBAT1L@l
-	addis	r3, r0, CFG_DBAT1U@h
-	ori	r3, r3, CFG_DBAT1U@l
+	addis	r4, r0, CONFIG_SYS_DBAT1L@h
+	ori	r4, r4, CONFIG_SYS_DBAT1L@l
+	addis	r3, r0, CONFIG_SYS_DBAT1U@h
+	ori	r3, r3, CONFIG_SYS_DBAT1U@l
 	mtspr	DBAT1L, r4
 	mtspr	DBAT1U, r3
 	isync
 
 	/* IBAT 2 */
-	addis	r4, r0, CFG_IBAT2L@h
-	ori	r4, r4, CFG_IBAT2L@l
-	addis	r3, r0, CFG_IBAT2U@h
-	ori	r3, r3, CFG_IBAT2U@l
+	addis	r4, r0, CONFIG_SYS_IBAT2L@h
+	ori	r4, r4, CONFIG_SYS_IBAT2L@l
+	addis	r3, r0, CONFIG_SYS_IBAT2U@h
+	ori	r3, r3, CONFIG_SYS_IBAT2U@l
 	mtspr	IBAT2L, r4
 	mtspr	IBAT2U, r3
 	isync
 
 	/* DBAT 2 */
-	addis	r4, r0, CFG_DBAT2L@h
-	ori	r4, r4, CFG_DBAT2L@l
-	addis	r3, r0, CFG_DBAT2U@h
-	ori	r3, r3, CFG_DBAT2U@l
+	addis	r4, r0, CONFIG_SYS_DBAT2L@h
+	ori	r4, r4, CONFIG_SYS_DBAT2L@l
+	addis	r3, r0, CONFIG_SYS_DBAT2U@h
+	ori	r3, r3, CONFIG_SYS_DBAT2U@l
 	mtspr	DBAT2L, r4
 	mtspr	DBAT2U, r3
 	isync
 
 	/* IBAT 3 */
-	addis	r4, r0, CFG_IBAT3L@h
-	ori	r4, r4, CFG_IBAT3L@l
-	addis	r3, r0, CFG_IBAT3U@h
-	ori	r3, r3, CFG_IBAT3U@l
+	addis	r4, r0, CONFIG_SYS_IBAT3L@h
+	ori	r4, r4, CONFIG_SYS_IBAT3L@l
+	addis	r3, r0, CONFIG_SYS_IBAT3U@h
+	ori	r3, r3, CONFIG_SYS_IBAT3U@l
 	mtspr	IBAT3L, r4
 	mtspr	IBAT3U, r3
 	isync
 
 	/* DBAT 3 */
-	addis	r4, r0, CFG_DBAT3L@h
-	ori	r4, r4, CFG_DBAT3L@l
-	addis	r3, r0, CFG_DBAT3U@h
-	ori	r3, r3, CFG_DBAT3U@l
+	addis	r4, r0, CONFIG_SYS_DBAT3L@h
+	ori	r4, r4, CONFIG_SYS_DBAT3L@l
+	addis	r3, r0, CONFIG_SYS_DBAT3U@h
+	ori	r3, r3, CONFIG_SYS_DBAT3U@l
 	mtspr	DBAT3L, r4
 	mtspr	DBAT3U, r3
 	isync
 
 #ifdef CONFIG_HIGH_BATS
 	/* IBAT 4 */
-	addis   r4, r0, CFG_IBAT4L@h
-	ori     r4, r4, CFG_IBAT4L@l
-	addis   r3, r0, CFG_IBAT4U@h
-	ori     r3, r3, CFG_IBAT4U@l
+	addis   r4, r0, CONFIG_SYS_IBAT4L@h
+	ori     r4, r4, CONFIG_SYS_IBAT4L@l
+	addis   r3, r0, CONFIG_SYS_IBAT4U@h
+	ori     r3, r3, CONFIG_SYS_IBAT4U@l
 	mtspr   IBAT4L, r4
 	mtspr   IBAT4U, r3
 	isync
 
 	/* DBAT 4 */
-	addis   r4, r0, CFG_DBAT4L@h
-	ori     r4, r4, CFG_DBAT4L@l
-	addis   r3, r0, CFG_DBAT4U@h
-	ori     r3, r3, CFG_DBAT4U@l
+	addis   r4, r0, CONFIG_SYS_DBAT4L@h
+	ori     r4, r4, CONFIG_SYS_DBAT4L@l
+	addis   r3, r0, CONFIG_SYS_DBAT4U@h
+	ori     r3, r3, CONFIG_SYS_DBAT4U@l
 	mtspr   DBAT4L, r4
 	mtspr   DBAT4U, r3
 	isync
 
 	/* IBAT 5 */
-	addis   r4, r0, CFG_IBAT5L@h
-	ori     r4, r4, CFG_IBAT5L@l
-	addis   r3, r0, CFG_IBAT5U@h
-	ori     r3, r3, CFG_IBAT5U@l
+	addis   r4, r0, CONFIG_SYS_IBAT5L@h
+	ori     r4, r4, CONFIG_SYS_IBAT5L@l
+	addis   r3, r0, CONFIG_SYS_IBAT5U@h
+	ori     r3, r3, CONFIG_SYS_IBAT5U@l
 	mtspr   IBAT5L, r4
 	mtspr   IBAT5U, r3
 	isync
 
 	/* DBAT 5 */
-	addis   r4, r0, CFG_DBAT5L@h
-	ori     r4, r4, CFG_DBAT5L@l
-	addis   r3, r0, CFG_DBAT5U@h
-	ori     r3, r3, CFG_DBAT5U@l
+	addis   r4, r0, CONFIG_SYS_DBAT5L@h
+	ori     r4, r4, CONFIG_SYS_DBAT5L@l
+	addis   r3, r0, CONFIG_SYS_DBAT5U@h
+	ori     r3, r3, CONFIG_SYS_DBAT5U@l
 	mtspr   DBAT5L, r4
 	mtspr   DBAT5U, r3
 	isync
 
 	/* IBAT 6 */
-	addis   r4, r0, CFG_IBAT6L@h
-	ori     r4, r4, CFG_IBAT6L@l
-	addis   r3, r0, CFG_IBAT6U@h
-	ori     r3, r3, CFG_IBAT6U@l
+	addis   r4, r0, CONFIG_SYS_IBAT6L@h
+	ori     r4, r4, CONFIG_SYS_IBAT6L@l
+	addis   r3, r0, CONFIG_SYS_IBAT6U@h
+	ori     r3, r3, CONFIG_SYS_IBAT6U@l
 	mtspr   IBAT6L, r4
 	mtspr   IBAT6U, r3
 	isync
 
 	/* DBAT 6 */
-	addis   r4, r0, CFG_DBAT6L@h
-	ori     r4, r4, CFG_DBAT6L@l
-	addis   r3, r0, CFG_DBAT6U@h
-	ori     r3, r3, CFG_DBAT6U@l
+	addis   r4, r0, CONFIG_SYS_DBAT6L@h
+	ori     r4, r4, CONFIG_SYS_DBAT6L@l
+	addis   r3, r0, CONFIG_SYS_DBAT6U@h
+	ori     r3, r3, CONFIG_SYS_DBAT6U@l
 	mtspr   DBAT6L, r4
 	mtspr   DBAT6U, r3
 	isync
 
 	/* IBAT 7 */
-	addis   r4, r0, CFG_IBAT7L@h
-	ori     r4, r4, CFG_IBAT7L@l
-	addis   r3, r0, CFG_IBAT7U@h
-	ori     r3, r3, CFG_IBAT7U@l
+	addis   r4, r0, CONFIG_SYS_IBAT7L@h
+	ori     r4, r4, CONFIG_SYS_IBAT7L@l
+	addis   r3, r0, CONFIG_SYS_IBAT7U@h
+	ori     r3, r3, CONFIG_SYS_IBAT7U@l
 	mtspr   IBAT7L, r4
 	mtspr   IBAT7U, r3
 	isync
 
 	/* DBAT 7 */
-	addis   r4, r0, CFG_DBAT7L@h
-	ori     r4, r4, CFG_DBAT7L@l
-	addis   r3, r0, CFG_DBAT7U@h
-	ori     r3, r3, CFG_DBAT7U@l
+	addis   r4, r0, CONFIG_SYS_DBAT7L@h
+	ori     r4, r4, CONFIG_SYS_DBAT7L@l
+	addis   r3, r0, CONFIG_SYS_DBAT7U@h
+	ori     r3, r3, CONFIG_SYS_DBAT7U@l
 	mtspr   DBAT7L, r4
 	mtspr   DBAT7U, r3
 	isync
@@ -612,16 +613,16 @@ relocate_code:
 	mr	r10, r5		/* Save copy of Destination Address	*/
 
 	mr	r3,  r5				/* Destination Address	*/
-	lis	r4, CFG_MONITOR_BASE@h		/* Source      Address	*/
-	ori	r4, r4, CFG_MONITOR_BASE@l
+	lis	r4, CONFIG_SYS_MONITOR_BASE@h		/* Source      Address	*/
+	ori	r4, r4, CONFIG_SYS_MONITOR_BASE@l
 	lwz	r5, GOT(__init_end)
 	sub	r5, r5, r4
-	li	r6, CFG_CACHELINE_SIZE		/* Cache Line Size	*/
+	li	r6, CONFIG_SYS_CACHELINE_SIZE		/* Cache Line Size	*/
 
 	/*
 	 * Fix GOT pointer:
 	 *
-	 * New GOT-PTR = (old GOT-PTR - CFG_MONITOR_BASE) + Destination Address
+	 * New GOT-PTR = (old GOT-PTR - CONFIG_SYS_MONITOR_BASE) + Destination Address
 	 *
 	 * Offset:
 	 */
@@ -639,11 +640,11 @@ relocate_code:
 	bl	board_relocate_rom
 	sync
 	mr	r3, r10				/* Destination Address	*/
-	lis	r4, CFG_MONITOR_BASE@h		/* Source      Address	*/
-	ori	r4, r4, CFG_MONITOR_BASE@l
+	lis	r4, CONFIG_SYS_MONITOR_BASE@h		/* Source      Address	*/
+	ori	r4, r4, CONFIG_SYS_MONITOR_BASE@l
 	lwz	r5, GOT(__init_end)
 	sub	r5, r5, r4
-	li	r6, CFG_CACHELINE_SIZE		/* Cache Line Size	*/
+	li	r6, CONFIG_SYS_CACHELINE_SIZE		/* Cache Line Size	*/
 #else
 	cmplw	cr1,r3,r4
 	addi	r0,r5,3
@@ -851,15 +852,15 @@ trap_reloc:
 
 	blr
 
-#ifdef CFG_INIT_RAM_LOCK
+#ifdef CONFIG_SYS_INIT_RAM_LOCK
 lock_ram_in_cache:
 	/* Allocate Initial RAM in data cache.
 	 */
-	lis	r3, (CFG_INIT_RAM_ADDR & ~31)@h
-	ori	r3, r3, (CFG_INIT_RAM_ADDR & ~31)@l
-	li	r2, ((CFG_INIT_RAM_END & ~31) + \
-		     (CFG_INIT_RAM_ADDR & 31) + 31) / 32
-	mtctr	r2
+	lis	r3, (CONFIG_SYS_INIT_RAM_ADDR & ~31)@h
+	ori	r3, r3, (CONFIG_SYS_INIT_RAM_ADDR & ~31)@l
+	li	r4, ((CONFIG_SYS_INIT_RAM_END & ~31) + \
+		     (CONFIG_SYS_INIT_RAM_ADDR & 31) + 31) / 32
+	mtctr	r4
 1:
 	dcbz	r0, r3
 	addi	r3, r3, 32
@@ -876,11 +877,11 @@ lock_ram_in_cache:
 .globl unlock_ram_in_cache
 unlock_ram_in_cache:
 	/* invalidate the INIT_RAM section */
-	lis	r3, (CFG_INIT_RAM_ADDR & ~31)@h
-	ori	r3, r3, (CFG_INIT_RAM_ADDR & ~31)@l
-	li	r2, ((CFG_INIT_RAM_END & ~31) + \
-		     (CFG_INIT_RAM_ADDR & 31) + 31) / 32
-	mtctr	r2
+	lis	r3, (CONFIG_SYS_INIT_RAM_ADDR & ~31)@h
+	ori	r3, r3, (CONFIG_SYS_INIT_RAM_ADDR & ~31)@l
+	li	r4, ((CONFIG_SYS_INIT_RAM_END & ~31) + \
+		     (CONFIG_SYS_INIT_RAM_ADDR & 31) + 31) / 32
+	mtctr	r4
 1:	icbi	r0, r3
 	addi	r3, r3, 32
 	bdnz	1b
diff --git a/cpu/arm1136/cpu.c b/cpu/arm1136/cpu.c
index c27f8cd58..04861632e 100644
--- a/cpu/arm1136/cpu.c
+++ b/cpu/arm1136/cpu.c
@@ -89,7 +89,7 @@ int cpu_init (void)
 	 * setup up stacks if necessary
 	 */
 #ifdef CONFIG_USE_IRQ
-	IRQ_STACK_START = _armboot_start - CFG_MALLOC_LEN - CFG_GBL_DATA_SIZE - 4;
+	IRQ_STACK_START = _armboot_start - CONFIG_SYS_MALLOC_LEN - CONFIG_SYS_GBL_DATA_SIZE - 4;
 	FIQ_STACK_START = IRQ_STACK_START - CONFIG_STACKSIZE_IRQ;
 #endif
 	return 0;
diff --git a/cpu/arm1136/mx31/interrupts.c b/cpu/arm1136/mx31/interrupts.c
index 21b77a544..ab7202fef 100644
--- a/cpu/arm1136/mx31/interrupts.c
+++ b/cpu/arm1136/mx31/interrupts.c
@@ -23,45 +23,123 @@
 
 #include <common.h>
 #include <asm/arch/mx31-regs.h>
+#include <div64.h>
 
 #define TIMER_BASE 0x53f90000 /* General purpose timer 1 */
 
 /* General purpose timers registers */
-#define GPTCR   __REG(TIMER_BASE) /* Control register */
-#define GPTPR  __REG(TIMER_BASE + 0x4) /* Prescaler register */
-#define GPTSR   __REG(TIMER_BASE + 0x8) /* Status register */
-#define GPTCNT __REG(TIMER_BASE + 0x24) /* Counter register */
+#define GPTCR	__REG(TIMER_BASE)		/* Control register	*/
+#define GPTPR	__REG(TIMER_BASE + 0x4)		/* Prescaler register	*/
+#define GPTSR	__REG(TIMER_BASE + 0x8)		/* Status register	*/
+#define GPTCNT	__REG(TIMER_BASE + 0x24)	/* Counter register	*/
 
 /* General purpose timers bitfields */
-#define GPTCR_SWR       (1<<15) /* Software reset */
-#define GPTCR_FRR       (1<<9)  /* Freerun / restart */
-#define GPTCR_CLKSOURCE_32 (4<<6)  /* Clock source */
-#define GPTCR_TEN       (1)     /* Timer enable */
+#define GPTCR_SWR		(1 << 15)	/* Software reset	*/
+#define GPTCR_FRR		(1 << 9)	/* Freerun / restart	*/
+#define GPTCR_CLKSOURCE_32	(4 << 6)	/* Clock source		*/
+#define GPTCR_TEN		1		/* Timer enable		*/
+
+static ulong timestamp;
+static ulong lastinc;
+
+/* "time" is measured in 1 / CONFIG_SYS_HZ seconds, "tick" is internal timer period */
+#ifdef CONFIG_MX31_TIMER_HIGH_PRECISION
+/* ~0.4% error - measured with stop-watch on 100s boot-delay */
+static inline unsigned long long tick_to_time(unsigned long long tick)
+{
+	tick *= CONFIG_SYS_HZ;
+	do_div(tick, CONFIG_MX31_CLK32);
+	return tick;
+}
+
+static inline unsigned long long time_to_tick(unsigned long long time)
+{
+	time *= CONFIG_MX31_CLK32;
+	do_div(time, CONFIG_SYS_HZ);
+	return time;
+}
+
+static inline unsigned long long us_to_tick(unsigned long long us)
+{
+	us = us * CONFIG_MX31_CLK32 + 999999;
+	do_div(us, 1000000);
+	return us;
+}
+#else
+/* ~2% error */
+#define TICK_PER_TIME	((CONFIG_MX31_CLK32 + CONFIG_SYS_HZ / 2) / CONFIG_SYS_HZ)
+#define US_PER_TICK	(1000000 / CONFIG_MX31_CLK32)
+
+static inline unsigned long long tick_to_time(unsigned long long tick)
+{
+	do_div(tick, TICK_PER_TIME);
+	return tick;
+}
+
+static inline unsigned long long time_to_tick(unsigned long long time)
+{
+	return time * TICK_PER_TIME;
+}
+
+static inline unsigned long long us_to_tick(unsigned long long us)
+{
+	us += US_PER_TICK - 1;
+	do_div(us, US_PER_TICK);
+	return us;
+}
+#endif
 
 /* nothing really to do with interrupts, just starts up a counter. */
+/* The 32768Hz 32-bit timer overruns in 131072 seconds */
 int interrupt_init (void)
 {
 	int i;
 
 	/* setup GP Timer 1 */
 	GPTCR = GPTCR_SWR;
-	for ( i=0; i<100; i++) GPTCR = 0; /* We have no udelay by now */
+	for (i = 0; i < 100; i++)
+		GPTCR = 0; /* We have no udelay by now */
 	GPTPR = 0; /* 32Khz */
-	GPTCR |= GPTCR_CLKSOURCE_32 | GPTCR_TEN; /* Freerun Mode, PERCLK1 input */
+	/* Freerun Mode, PERCLK1 input */
+	GPTCR |= GPTCR_CLKSOURCE_32 | GPTCR_TEN;
 
 	return 0;
 }
 
 void reset_timer_masked (void)
 {
-	GPTCR = 0;
-	GPTCR = GPTCR_CLKSOURCE_32 | GPTCR_TEN; /* Freerun Mode, PERCLK1 input */
+	/* reset time */
+	lastinc = GPTCNT; /* capture current incrementer value time */
+	timestamp = 0; /* start "advancing" time stamp from 0 */
+}
+
+void reset_timer(void)
+{
+	reset_timer_masked();
+}
+
+unsigned long long get_ticks (void)
+{
+	ulong now = GPTCNT; /* current tick value */
+
+	if (now >= lastinc)	/* normal mode (non roll) */
+		/* move stamp forward with absolut diff ticks */
+		timestamp += (now - lastinc);
+	else			/* we have rollover of incrementer */
+		timestamp += (0xFFFFFFFF - lastinc) + now;
+	lastinc = now;
+	return timestamp;
 }
 
 ulong get_timer_masked (void)
 {
-	ulong val = GPTCNT;
-	return val;
+	/*
+	 * get_ticks() returns a long long (64 bit), it wraps in
+	 * 2^64 / CONFIG_MX31_CLK32 = 2^64 / 2^15 = 2^49 ~ 5 * 10^14 (s) ~
+	 * 5 * 10^9 days... and get_ticks() * CONFIG_SYS_HZ wraps in
+	 * 5 * 10^6 days - long enough.
+	 */
+	return tick_to_time(get_ticks());
 }
 
 ulong get_timer (ulong base)
@@ -71,29 +149,20 @@ ulong get_timer (ulong base)
 
 void set_timer (ulong t)
 {
+	timestamp = time_to_tick(t);
 }
 
 /* delay x useconds AND perserve advance timstamp value */
 void udelay (unsigned long usec)
 {
-	ulong tmo, tmp;
-
-	if (usec >= 1000) {			/* if "big" number, spread normalization to seconds */
-		tmo = usec / 1000;		/* start to normalize for usec to ticks per sec */
-		tmo *= CFG_HZ;			/* find number of "ticks" to wait to achieve target */
-		tmo /= 1000;			/* finish normalize. */
-	} else {					/* else small number, don't kill it prior to HZ multiply */
-		tmo = usec * CFG_HZ;
-		tmo /= (1000*1000);
-	}
-
-	tmp = get_timer (0);		/* get current timestamp */
-	if ( (tmo + tmp + 1) < tmp )/* if setting this forward will roll time stamp */
-		reset_timer_masked ();	/* reset "advancing" timestamp to 0, set lastinc value */
-	else
-		tmo	+= tmp;				/* else, set advancing stamp wake up time */
-	while (get_timer_masked () < tmo)/* loop till event */
-		/*NOP*/;
+	unsigned long long tmp;
+	ulong tmo;
+
+	tmo = us_to_tick(usec);
+	tmp = get_ticks() + tmo;	/* get current timestamp */
+
+	while (get_ticks() < tmp)	/* loop till event */
+		 /*NOP*/;
 }
 
 void reset_cpu (ulong addr)
diff --git a/cpu/arm1136/mx31/serial.c b/cpu/arm1136/mx31/serial.c
index f49859941..e025e941d 100644
--- a/cpu/arm1136/mx31/serial.c
+++ b/cpu/arm1136/mx31/serial.c
@@ -25,18 +25,18 @@
 
 #define __REG(x)     (*((volatile u32 *)(x)))
 
-#ifdef CFG_MX31_UART1
+#ifdef CONFIG_SYS_MX31_UART1
 #define UART_PHYS 0x43f90000
-#elif defined(CFG_MX31_UART2)
+#elif defined(CONFIG_SYS_MX31_UART2)
 #define UART_PHYS 0x43f94000
-#elif defined(CFG_MX31_UART3)
+#elif defined(CONFIG_SYS_MX31_UART3)
 #define UART_PHYS 0x5000c000
-#elif defined(CFG_MX31_UART4)
+#elif defined(CONFIG_SYS_MX31_UART4)
 #define UART_PHYS 0x43fb0000
-#elif defined(CFG_MX31_UART5)
+#elif defined(CONFIG_SYS_MX31_UART5)
 #define UART_PHYS 0x43fb4000
 #else
-#error "define CFG_MX31_UARTx to use the mx31 UART driver"
+#error "define CONFIG_SYS_MX31_UARTx to use the mx31 UART driver"
 #endif
 
 /* Register definitions */
diff --git a/cpu/arm1136/omap24xx/interrupts.c b/cpu/arm1136/omap24xx/interrupts.c
index b9a8b9352..fb02a49be 100644
--- a/cpu/arm1136/omap24xx/interrupts.c
+++ b/cpu/arm1136/omap24xx/interrupts.c
@@ -37,7 +37,7 @@
 #define TIMER_LOAD_VAL 0
 
 /* macro to read the 32 bit timer */
-#define READ_TIMER (*((volatile ulong *)(CFG_TIMERBASE+TCRR)))
+#define READ_TIMER (*((volatile ulong *)(CONFIG_SYS_TIMERBASE+TCRR)))
 
 static ulong timestamp;
 static ulong lastinc;
@@ -48,9 +48,9 @@ int interrupt_init (void)
 	int32_t val;
 
 	/* Start the counter ticking up */
-	*((int32_t *) (CFG_TIMERBASE + TLDR)) = TIMER_LOAD_VAL;	/* reload value on overflow*/
-	val = (CFG_PVT << 2) | BIT5 | BIT1 | BIT0;		/* mask to enable timer*/
-	*((int32_t *) (CFG_TIMERBASE + TCLR)) = val;	/* start timer */
+	*((int32_t *) (CONFIG_SYS_TIMERBASE + TLDR)) = TIMER_LOAD_VAL;	/* reload value on overflow*/
+	val = (CONFIG_SYS_PVT << 2) | BIT5 | BIT1 | BIT0;		/* mask to enable timer*/
+	*((int32_t *) (CONFIG_SYS_TIMERBASE + TCLR)) = val;	/* start timer */
 
 	reset_timer_masked(); /* init the timestamp and lastinc value */
 
@@ -81,10 +81,10 @@ void udelay (unsigned long usec)
 
 	if (usec >= 1000) {			/* if "big" number, spread normalization to seconds */
 		tmo = usec / 1000;		/* start to normalize for usec to ticks per sec */
-		tmo *= CFG_HZ;			/* find number of "ticks" to wait to achieve target */
+		tmo *= CONFIG_SYS_HZ;			/* find number of "ticks" to wait to achieve target */
 		tmo /= 1000;			/* finish normalize. */
 	} else {					/* else small number, don't kill it prior to HZ multiply */
-		tmo = usec * CFG_HZ;
+		tmo = usec * CONFIG_SYS_HZ;
 		tmo /= (1000*1000);
 	}
 
@@ -125,10 +125,10 @@ void udelay_masked (unsigned long usec)
 
 	if (usec >= 1000) {			/* if "big" number, spread normalization to seconds */
 		tmo = usec / 1000;		/* start to normalize for usec to ticks per sec */
-		tmo *= CFG_HZ;			/* find number of "ticks" to wait to achieve target */
+		tmo *= CONFIG_SYS_HZ;			/* find number of "ticks" to wait to achieve target */
 		tmo /= 1000;			/* finish normalize. */
 	} else {					/* else small number, don't kill it prior to HZ multiply */
-		tmo = usec * CFG_HZ;
+		tmo = usec * CONFIG_SYS_HZ;
 		tmo /= (1000*1000);
 	}
 	endtime = get_timer_masked () + tmo;
@@ -154,6 +154,6 @@ unsigned long long get_ticks(void)
 ulong get_tbclk (void)
 {
 	ulong tbclk;
-	tbclk = CFG_HZ;
+	tbclk = CONFIG_SYS_HZ;
 	return tbclk;
 }
diff --git a/cpu/arm1136/start.S b/cpu/arm1136/start.S
index 51b664d93..e6223388d 100644
--- a/cpu/arm1136/start.S
+++ b/cpu/arm1136/start.S
@@ -178,8 +178,8 @@ stack_setup:
 #ifdef CONFIG_ONENAND_IPL
 	sub	sp, r0, #128		/* leave 32 words for abort-stack   */
 #else
-	sub	r0, r0, #CFG_MALLOC_LEN /* malloc area			    */
-	sub	r0, r0, #CFG_GBL_DATA_SIZE /* bdinfo			    */
+	sub	r0, r0, #CONFIG_SYS_MALLOC_LEN /* malloc area			    */
+	sub	r0, r0, #CONFIG_SYS_GBL_DATA_SIZE /* bdinfo			    */
 #ifdef CONFIG_USE_IRQ
 	sub	r0, r0, #(CONFIG_STACKSIZE_IRQ+CONFIG_STACKSIZE_FIQ)
 #endif
@@ -290,8 +290,8 @@ cpu_init_crit:
 	stmia	sp, {r0 - r12}			@ Save user registers (now in svc mode) r0-r12
 
 	ldr	r2, _armboot_start
-	sub	r2, r2, #(CFG_MALLOC_LEN)
-	sub	r2, r2, #(CFG_GBL_DATA_SIZE+8)	@ set base 2 words into abort stack
+	sub	r2, r2, #(CONFIG_SYS_MALLOC_LEN)
+	sub	r2, r2, #(CONFIG_SYS_GBL_DATA_SIZE+8)	@ set base 2 words into abort stack
 	ldmia	r2, {r2 - r3}			@ get values for "aborted" pc and cpsr (into parm regs)
 	add	r0, sp, #S_FRAME_SIZE		@ grab pointer to old stack
 
@@ -323,8 +323,8 @@ cpu_init_crit:
 
 	.macro get_bad_stack
 	ldr	r13, _armboot_start		@ setup our mode stack (enter in banked mode)
-	sub	r13, r13, #(CFG_MALLOC_LEN)	@ move past malloc pool
-	sub	r13, r13, #(CFG_GBL_DATA_SIZE+8) @ move to reserved a couple spots for abort stack
+	sub	r13, r13, #(CONFIG_SYS_MALLOC_LEN)	@ move past malloc pool
+	sub	r13, r13, #(CONFIG_SYS_GBL_DATA_SIZE+8) @ move to reserved a couple spots for abort stack
 
 	str	lr, [r13]			@ save caller lr in position 0 of saved stack
 	mrs	lr, spsr			@ get the spsr
@@ -341,8 +341,8 @@ cpu_init_crit:
 	sub	r13, r13, #4			@ space on current stack for scratch reg.
 	str	r0, [r13]			@ save R0's value.
 	ldr	r0, _armboot_start		@ get data regions start
-	sub	r0, r0, #(CFG_MALLOC_LEN)	@ move past malloc pool
-	sub	r0, r0, #(CFG_GBL_DATA_SIZE+8)	@ move past gbl and a couple spots for abort stack
+	sub	r0, r0, #(CONFIG_SYS_MALLOC_LEN)	@ move past malloc pool
+	sub	r0, r0, #(CONFIG_SYS_GBL_DATA_SIZE+8)	@ move past gbl and a couple spots for abort stack
 	str	lr, [r0]			@ save caller lr in position 0 of saved stack
 	mrs	r0, spsr			@ get the spsr
 	str	lr, [r0, #4]			@ save spsr in position 1 of saved stack
diff --git a/cpu/arm1176/s3c64xx/interrupts.c b/cpu/arm1176/s3c64xx/interrupts.c
index 8356ae49e..83f3806ac 100644
--- a/cpu/arm1176/s3c64xx/interrupts.c
+++ b/cpu/arm1176/s3c64xx/interrupts.c
@@ -41,6 +41,7 @@
 #include <common.h>
 #include <asm/proc-armv/ptrace.h>
 #include <s3c6400.h>
+#include <div64.h>
 
 static ulong timer_load_val;
 
@@ -148,7 +149,9 @@ void reset_timer(void)
 
 ulong get_timer_masked(void)
 {
-	return get_ticks() / (timer_load_val / (100 * CFG_HZ));
+	unsigned long long res = get_ticks();
+	do_div (res, (timer_load_val / (100 * CONFIG_SYS_HZ)));
+	return res;
 }
 
 ulong get_timer(ulong base)
@@ -158,7 +161,7 @@ ulong get_timer(ulong base)
 
 void set_timer(ulong t)
 {
-	timestamp = t * (timer_load_val / (100 * CFG_HZ));
+	timestamp = t * (timer_load_val / (100 * CONFIG_SYS_HZ));
 }
 
 void udelay(unsigned long usec)
diff --git a/cpu/arm1176/start.S b/cpu/arm1176/start.S
index 991277f1c..cb891df17 100644
--- a/cpu/arm1176/start.S
+++ b/cpu/arm1176/start.S
@@ -37,8 +37,8 @@
 #endif
 #include <s3c6400.h>
 
-#if !defined(CONFIG_ENABLE_MMU) && !defined(CFG_PHY_UBOOT_BASE)
-#define CFG_PHY_UBOOT_BASE	CFG_UBOOT_BASE
+#if !defined(CONFIG_ENABLE_MMU) && !defined(CONFIG_SYS_PHY_UBOOT_BASE)
+#define CONFIG_SYS_PHY_UBOOT_BASE	CONFIG_SYS_UBOOT_BASE
 #endif
 
 /*
@@ -105,7 +105,7 @@ _TEXT_BASE:
  * by scsuh.
  */
 _TEXT_PHY_BASE:
-	.word	CFG_PHY_UBOOT_BASE
+	.word	CONFIG_SYS_PHY_UBOOT_BASE
 
 .globl _armboot_start
 _armboot_start:
@@ -209,7 +209,7 @@ enable_mmu:
 
 	/* Set the TTB register */
 	ldr	r0, _mmu_table_base
-	ldr	r1, =CFG_PHY_UBOOT_BASE
+	ldr	r1, =CONFIG_SYS_PHY_UBOOT_BASE
 	ldr	r2, =0xfff00000
 	bic	r0, r0, r2
 	orr	r1, r0, r1
@@ -242,11 +242,11 @@ skip_hw_init:
 	/* Set up the stack						    */
 stack_setup:
 #ifdef CONFIG_MEMORY_UPPER_CODE
-	ldr	sp, =(CFG_UBOOT_BASE + CFG_UBOOT_SIZE - 0xc)
+	ldr	sp, =(CONFIG_SYS_UBOOT_BASE + CONFIG_SYS_UBOOT_SIZE - 0xc)
 #else
 	ldr	r0, _TEXT_BASE		/* upper 128 KiB: relocated uboot   */
-	sub	r0, r0, #CFG_MALLOC_LEN	/* malloc area                      */
-	sub	r0, r0, #CFG_GBL_DATA_SIZE /* bdinfo                        */
+	sub	r0, r0, #CONFIG_SYS_MALLOC_LEN	/* malloc area                      */
+	sub	r0, r0, #CONFIG_SYS_GBL_DATA_SIZE /* bdinfo                        */
 	sub	sp, r0, #12		/* leave 3 words for abort-stack    */
 
 #endif
@@ -357,9 +357,9 @@ phy_last_jump:
 	stmia	sp, {r0 - r12}
 
 	ldr	r2, _armboot_start
-	sub	r2, r2, #(CFG_MALLOC_LEN)
+	sub	r2, r2, #(CONFIG_SYS_MALLOC_LEN)
 	/* set base 2 words into abort stack */
-	sub	r2, r2, #(CFG_GBL_DATA_SIZE+8)
+	sub	r2, r2, #(CONFIG_SYS_GBL_DATA_SIZE+8)
 	/* get values for "aborted" pc and cpsr (into parm regs) */
 	ldmia	r2, {r2 - r3}
 	/* grab pointer to old stack */
@@ -377,9 +377,9 @@ phy_last_jump:
 	/* setup our mode stack (enter in banked mode) */
 	ldr	r13, _armboot_start
 	/* move past malloc pool */
-	sub	r13, r13, #(CFG_MALLOC_LEN)
+	sub	r13, r13, #(CONFIG_SYS_MALLOC_LEN)
 	/* move to reserved a couple spots for abort stack */
-	sub	r13, r13, #(CFG_GBL_DATA_SIZE + 8)
+	sub	r13, r13, #(CONFIG_SYS_GBL_DATA_SIZE + 8)
 
 	/* save caller lr in position 0 of saved stack */
 	str	lr, [r13]
@@ -407,9 +407,9 @@ phy_last_jump:
 	/* get data regions start */
 	ldr	r0, _armboot_start
 	/* move past malloc pool */
-	sub	r0, r0, #(CFG_MALLOC_LEN)
+	sub	r0, r0, #(CONFIG_SYS_MALLOC_LEN)
 	/* move past gbl and a couple spots for abort stack */
-	sub	r0, r0, #(CFG_GBL_DATA_SIZE + 8)
+	sub	r0, r0, #(CONFIG_SYS_GBL_DATA_SIZE + 8)
 	/* save caller lr in position 0 of saved stack */
 	str	lr, [r0]
 	/* get the spsr */
diff --git a/cpu/arm720t/config.mk b/cpu/arm720t/config.mk
index 641b91cd8..3cae1dc8f 100644
--- a/cpu/arm720t/config.mk
+++ b/cpu/arm720t/config.mk
@@ -32,4 +32,5 @@ PLATFORM_CPPFLAGS += -march=armv4 -mtune=arm7tdmi
 #
 # =========================================================================
 PLATFORM_CPPFLAGS +=$(call cc-option,-mapcs-32,-mabi=apcs-gnu)
+PLATFORM_CPPFLAGS +=$(call cc-option,-mno-thumb-interwork,)
 PLATFORM_RELFLAGS +=$(call cc-option,-mshort-load-bytes,$(call cc-option,-malignment-traps,))
diff --git a/cpu/arm720t/cpu.c b/cpu/arm720t/cpu.c
index 60c1aa90b..5ac8f59ab 100644
--- a/cpu/arm720t/cpu.c
+++ b/cpu/arm720t/cpu.c
@@ -41,7 +41,7 @@ int cpu_init (void)
 	 * setup up stacks if necessary
 	 */
 #ifdef CONFIG_USE_IRQ
-	IRQ_STACK_START = _armboot_start - CFG_MALLOC_LEN - CFG_GBL_DATA_SIZE - 4;
+	IRQ_STACK_START = _armboot_start - CONFIG_SYS_MALLOC_LEN - CONFIG_SYS_GBL_DATA_SIZE - 4;
 	FIQ_STACK_START = IRQ_STACK_START - CONFIG_STACKSIZE_IRQ;
 #endif
 	return 0;
diff --git a/cpu/arm720t/interrupts.c b/cpu/arm720t/interrupts.c
index 9854016d4..39ed345bb 100644
--- a/cpu/arm720t/interrupts.c
+++ b/cpu/arm720t/interrupts.c
@@ -95,7 +95,7 @@ static void timer_isr( void *data) {
 	unsigned int *pTime = (unsigned int *)data;
 
 	(*pTime)++;
-	if ( !(*pTime % (CFG_HZ/4))) {
+	if ( !(*pTime % (CONFIG_SYS_HZ/4))) {
 		/* toggle LED 0 */
 		PUT_REG( REG_IOPDATA, GET_REG(REG_IOPDATA) ^ 0x1);
 	}
@@ -118,7 +118,7 @@ int interrupt_init (void)
 	IRQEN = 0;
 
 	/* operate timer 2 in non-prescale mode */
-	TM2CTRL = ( NETARM_GEN_TIMER_SET_HZ(CFG_HZ) |
+	TM2CTRL = ( NETARM_GEN_TIMER_SET_HZ(CONFIG_SYS_HZ) |
 		    NETARM_GEN_TCTL_ENABLE |
 		    NETARM_GEN_TCTL_INIT_COUNT(TIMER_LOAD_VAL));
 
@@ -166,9 +166,9 @@ int interrupt_init (void)
 
 	/*
 	 * Load Timer data register with count down value.
-	 * count_down_val = CFG_SYS_CLK_FREQ/CFG_HZ
+	 * count_down_val = CONFIG_SYS_SYS_CLK_FREQ/CONFIG_SYS_HZ
 	 */
-	PUT_REG( REG_TDATA0, (CFG_SYS_CLK_FREQ / CFG_HZ));
+	PUT_REG( REG_TDATA0, (CONFIG_SYS_SYS_CLK_FREQ / CONFIG_SYS_HZ));
 
 	/*
 	 * Enable global interrupt
@@ -181,7 +181,7 @@ int interrupt_init (void)
 #elif defined(CONFIG_LPC2292)
 	PUT32(T0IR, 0);		/* disable all timer0 interrupts */
 	PUT32(T0TCR, 0);	/* disable timer0 */
-	PUT32(T0PR, CFG_SYS_CLK_FREQ / CFG_HZ);
+	PUT32(T0PR, CONFIG_SYS_SYS_CLK_FREQ / CONFIG_SYS_HZ);
 	PUT32(T0MCR, 0);
 	PUT32(T0TC, 0);
 	PUT32(T0TCR, 1);	/* enable timer0 */
@@ -223,7 +223,7 @@ void udelay (unsigned long usec)
 	ulong tmo;
 
 	tmo = usec / 1000;
-	tmo *= CFG_HZ;
+	tmo *= CONFIG_SYS_HZ;
 	tmo /= 1000;
 
 	tmo += get_timer (0);
@@ -268,10 +268,10 @@ void udelay_masked (unsigned long usec)
 
 	if (usec >= 1000) {
 		tmo = usec / 1000;
-		tmo *= CFG_HZ;
+		tmo *= CONFIG_SYS_HZ;
 		tmo /= 1000;
 	} else {
-		tmo = usec * CFG_HZ;
+		tmo = usec * CONFIG_SYS_HZ;
 		tmo /= (1000*1000);
 	}
 
@@ -294,7 +294,7 @@ void udelay (unsigned long usec)
 {
 	u32 ticks;
 
-	ticks = (usec * CFG_HZ) / 1000000;
+	ticks = (usec * CONFIG_SYS_HZ) / 1000000;
 
 	ticks += get_timer (0);
 
diff --git a/cpu/arm720t/lpc2292/flash.c b/cpu/arm720t/lpc2292/flash.c
index e5c869722..3d2dc3223 100644
--- a/cpu/arm720t/lpc2292/flash.c
+++ b/cpu/arm720t/lpc2292/flash.c
@@ -85,7 +85,7 @@ int lpc2292_copy_buffer_to_flash(flash_info_t * info, ulong flash_addr)
 	command[1] = flash_addr;
 	command[2] = COPY_BUFFER_LOCATION;
 	command[3] = 512;
-	command[4] = CFG_SYS_CLK_FREQ >> 10;
+	command[4] = CONFIG_SYS_SYS_CLK_FREQ >> 10;
 	iap_entry(command, result);
 	if (result[0] != IAP_RET_CMD_SUCCESS) {
 		printf("IAP copy failed\n");
@@ -132,7 +132,7 @@ int lpc2292_flash_erase (flash_info_t * info, int s_first, int s_last)
 	command[0] = IAP_CMD_ERASE;
 	command[1] = s_first;
 	command[2] = s_last;
-	command[3] = CFG_SYS_CLK_FREQ >> 10;
+	command[3] = CONFIG_SYS_SYS_CLK_FREQ >> 10;
 	iap_entry(command, result);
 	if (result[0] != IAP_RET_CMD_SUCCESS) {
 		printf("IAP erase failed\n");
diff --git a/cpu/arm720t/serial.c b/cpu/arm720t/serial.c
index 1b0e147e1..54a9b3137 100644
--- a/cpu/arm720t/serial.c
+++ b/cpu/arm720t/serial.c
@@ -85,7 +85,7 @@ void serial_putc (const char c)
 	if (c == '\n')
 		serial_putc ('\r');
 
-	tmo = get_timer (0) + 1 * CFG_HZ;
+	tmo = get_timer (0) + 1 * CONFIG_SYS_HZ;
 	while (IO_SYSFLG1 & SYSFLG1_UTXFF)
 		if (get_timer (0) > tmo)
 			break;
diff --git a/cpu/arm720t/serial_netarm.c b/cpu/arm720t/serial_netarm.c
index a593cbc32..1a1b2dbd4 100644
--- a/cpu/arm720t/serial_netarm.c
+++ b/cpu/arm720t/serial_netarm.c
@@ -46,7 +46,7 @@ DECLARE_GLOBAL_DATA_PTR;
 /* wait until transmitter is ready for another character */
 #define TXWAITRDY(registers)							\
 {										\
-	ulong tmo = get_timer(0) + 1 * CFG_HZ;					\
+	ulong tmo = get_timer(0) + 1 * CONFIG_SYS_HZ;					\
 	while (((registers)->status_a & NETARM_SER_STATA_TX_RDY) == 0 )	{	\
 		if (get_timer(0) > tmo)						\
 			break;							\
diff --git a/cpu/arm720t/start.S b/cpu/arm720t/start.S
index 8423e4f68..022b873e3 100644
--- a/cpu/arm720t/start.S
+++ b/cpu/arm720t/start.S
@@ -166,8 +166,8 @@ copy_loop:
 	/* Set up the stack						    */
 stack_setup:
 	ldr	r0, _TEXT_BASE		/* upper 128 KiB: relocated uboot   */
-	sub	r0, r0, #CFG_MALLOC_LEN /* malloc area			    */
-	sub	r0, r0, #CFG_GBL_DATA_SIZE /* bdinfo			    */
+	sub	r0, r0, #CONFIG_SYS_MALLOC_LEN /* malloc area			    */
+	sub	r0, r0, #CONFIG_SYS_GBL_DATA_SIZE /* bdinfo			    */
 #ifdef CONFIG_USE_IRQ
 	sub	r0, r0, #(CONFIG_STACKSIZE_IRQ+CONFIG_STACKSIZE_FIQ)
 #endif
@@ -444,8 +444,8 @@ lock_loop:
 	add	r8, sp, #S_PC
 
 	ldr	r2, _armboot_start
-	sub	r2, r2, #(CONFIG_STACKSIZE+CFG_MALLOC_LEN)
-	sub	r2, r2, #(CFG_GBL_DATA_SIZE+8)	@ set base 2 words into abort stack
+	sub	r2, r2, #(CONFIG_STACKSIZE+CONFIG_SYS_MALLOC_LEN)
+	sub	r2, r2, #(CONFIG_SYS_GBL_DATA_SIZE+8)	@ set base 2 words into abort stack
 	ldmia	r2, {r2 - r4}			@ get pc, cpsr, old_r0
 	add	r0, sp, #S_FRAME_SIZE		@ restore sp_SVC
 
@@ -477,8 +477,8 @@ lock_loop:
 
 	.macro get_bad_stack
 	ldr	r13, _armboot_start		@ setup our mode stack
-	sub	r13, r13, #(CONFIG_STACKSIZE+CFG_MALLOC_LEN)
-	sub	r13, r13, #(CFG_GBL_DATA_SIZE+8) @ reserved a couple spots in abort stack
+	sub	r13, r13, #(CONFIG_STACKSIZE+CONFIG_SYS_MALLOC_LEN)
+	sub	r13, r13, #(CONFIG_SYS_GBL_DATA_SIZE+8) @ reserved a couple spots in abort stack
 
 	str	lr, [r13]			@ save caller lr / spsr
 	mrs	lr, spsr
diff --git a/cpu/arm920t/at91rm9200/i2c.c b/cpu/arm920t/at91rm9200/i2c.c
index 826cea8e2..9fd72d397 100644
--- a/cpu/arm920t/at91rm9200/i2c.c
+++ b/cpu/arm920t/at91rm9200/i2c.c
@@ -120,7 +120,7 @@ int
 i2c_read (unsigned char chip, unsigned int addr, int alen,
 	  unsigned char *buffer, int len)
 {
-#ifdef CFG_I2C_EEPROM_ADDR_OVERFLOW
+#ifdef CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW
 	/* we only allow one address byte */
 	if (alen > 1)
 		return 1;
@@ -139,7 +139,7 @@ int
 i2c_write(unsigned char chip, unsigned int addr, int alen,
 	  unsigned char *buffer, int len)
 {
-#ifdef CFG_I2C_EEPROM_ADDR_OVERFLOW
+#ifdef CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW
 	int i;
 	unsigned char *buf;
 
@@ -189,18 +189,14 @@ i2c_init(int speed, int slaveaddr)
 	return;
 }
 
-uchar i2c_reg_read(uchar i2c_addr, uchar reg)
+int i2c_set_bus_speed(unsigned int speed)
 {
-	unsigned char buf;
-
-	i2c_read(i2c_addr, reg, 1, &buf, 1);
-
-	return(buf);
+	return -1;
 }
 
-void i2c_reg_write(uchar i2c_addr, uchar reg, uchar val)
+unsigned int i2c_get_bus_speed(void)
 {
-	i2c_write(i2c_addr, reg, 1, &val, 1);
+	return CONFIG_SYS_I2C_SPEED;
 }
 
 #endif /* CONFIG_HARD_I2C */
diff --git a/cpu/arm920t/at91rm9200/interrupts.c b/cpu/arm920t/at91rm9200/interrupts.c
index 10546027f..5f0703c2d 100644
--- a/cpu/arm920t/at91rm9200/interrupts.c
+++ b/cpu/arm920t/at91rm9200/interrupts.c
@@ -35,8 +35,8 @@
 #include <asm/arch/hardware.h>
 /*#include <asm/proc/ptrace.h>*/
 
-/* the number of clocks per CFG_HZ */
-#define TIMER_LOAD_VAL (CFG_HZ_CLOCK/CFG_HZ)
+/* the number of clocks per CONFIG_SYS_HZ */
+#define TIMER_LOAD_VAL (CONFIG_SYS_HZ_CLOCK/CONFIG_SYS_HZ)
 
 /* macro to read the 16 bit timer */
 #define READ_TIMER (tmr->TC_CV & 0x0000ffff)
@@ -126,7 +126,7 @@ void udelay_masked (unsigned long usec)
 	ulong endtime;
 	signed long diff;
 
-	tmo = CFG_HZ_CLOCK / 1000;
+	tmo = CONFIG_SYS_HZ_CLOCK / 1000;
 	tmo *= usec;
 	tmo /= 1000;
 
@@ -155,7 +155,7 @@ ulong get_tbclk (void)
 {
 	ulong tbclk;
 
-	tbclk = CFG_HZ;
+	tbclk = CONFIG_SYS_HZ;
 	return tbclk;
 }
 
diff --git a/cpu/arm920t/at91rm9200/lowlevel_init.S b/cpu/arm920t/at91rm9200/lowlevel_init.S
index 98363eb40..66b07da08 100644
--- a/cpu/arm920t/at91rm9200/lowlevel_init.S
+++ b/cpu/arm920t/at91rm9200/lowlevel_init.S
@@ -79,7 +79,7 @@ lowlevel_init:
 	/* Get the CKGR Base Address */
 	ldr     r1, =AT91C_BASE_CKGR
 	/* Main oscillator Enable register */
-#ifdef CFG_USE_MAIN_OSCILLATOR
+#ifdef CONFIG_SYS_USE_MAIN_OSCILLATOR
 	ldr     r0, =0x0000FF01		/* Enable main oscillator,  OSCOUNT = 0xFF */
 #else
 	ldr     r0, =0x0000FF00		/* Disable main oscillator, OSCOUNT = 0xFF */
diff --git a/cpu/arm920t/at91rm9200/spi.c b/cpu/arm920t/at91rm9200/spi.c
index 265d18525..f3cb5d8c2 100644
--- a/cpu/arm920t/at91rm9200/spi.c
+++ b/cpu/arm920t/at91rm9200/spi.c
@@ -137,11 +137,11 @@ unsigned int AT91F_SpiWrite ( AT91PS_DataflashDesc pDesc )
 
 	AT91C_BASE_SPI->SPI_PTCR = AT91C_PDC_TXTEN + AT91C_PDC_RXTEN;
 	while(!(AT91C_BASE_SPI->SPI_SR & AT91C_SPI_RXBUFF) &&
-		((timeout = get_timer_masked() ) < CFG_SPI_WRITE_TOUT));
+		((timeout = get_timer_masked() ) < CONFIG_SYS_SPI_WRITE_TOUT));
 	AT91C_BASE_SPI->SPI_PTCR = AT91C_PDC_TXTDIS + AT91C_PDC_RXTDIS;
 	pDesc->state = IDLE;
 
-	if (timeout >= CFG_SPI_WRITE_TOUT){
+	if (timeout >= CONFIG_SYS_SPI_WRITE_TOUT){
 		printf("Error Timeout\n\r");
 		return DATAFLASH_ERROR;
 	}
diff --git a/cpu/arm920t/at91rm9200/usb.c b/cpu/arm920t/at91rm9200/usb.c
index c121de632..72355dcf9 100644
--- a/cpu/arm920t/at91rm9200/usb.c
+++ b/cpu/arm920t/at91rm9200/usb.c
@@ -23,7 +23,7 @@
 
 #include <common.h>
 
-#if defined(CONFIG_USB_OHCI_NEW) && defined(CFG_USB_OHCI_CPU_INIT)
+#if defined(CONFIG_USB_OHCI_NEW) && defined(CONFIG_SYS_USB_OHCI_CPU_INIT)
 # ifdef CONFIG_AT91RM9200
 
 #include <asm/arch/hardware.h>
@@ -50,4 +50,4 @@ int usb_cpu_init_fail(void)
 }
 
 # endif /* CONFIG_AT91RM9200 */
-#endif /* defined(CONFIG_USB_OHCI) && defined(CFG_USB_OHCI_CPU_INIT) */
+#endif /* defined(CONFIG_USB_OHCI) && defined(CONFIG_SYS_USB_OHCI_CPU_INIT) */
diff --git a/cpu/arm920t/config.mk b/cpu/arm920t/config.mk
index 8db4adbe1..38718a352 100644
--- a/cpu/arm920t/config.mk
+++ b/cpu/arm920t/config.mk
@@ -31,4 +31,5 @@ PLATFORM_CPPFLAGS += -march=armv4
 #
 # =========================================================================
 PLATFORM_CPPFLAGS +=$(call cc-option,-mapcs-32,-mabi=apcs-gnu)
+PLATFORM_CPPFLAGS +=$(call cc-option,-mno-thumb-interwork,)
 PLATFORM_RELFLAGS +=$(call cc-option,-mshort-load-bytes,$(call cc-option,-malignment-traps,))
diff --git a/cpu/arm920t/cpu.c b/cpu/arm920t/cpu.c
index f93bf57e2..1b9cde62f 100644
--- a/cpu/arm920t/cpu.c
+++ b/cpu/arm920t/cpu.c
@@ -95,7 +95,7 @@ int cpu_init (void)
 	 * setup up stacks if necessary
 	 */
 #ifdef CONFIG_USE_IRQ
-	IRQ_STACK_START = _armboot_start - CFG_MALLOC_LEN - CFG_GBL_DATA_SIZE - 4;
+	IRQ_STACK_START = _armboot_start - CONFIG_SYS_MALLOC_LEN - CONFIG_SYS_GBL_DATA_SIZE - 4;
 	FIQ_STACK_START = IRQ_STACK_START - CONFIG_STACKSIZE_IRQ;
 #endif
 	return 0;
diff --git a/cpu/arm920t/imx/interrupts.c b/cpu/arm920t/imx/interrupts.c
index 03ce06d35..ddcfb3462 100644
--- a/cpu/arm920t/imx/interrupts.c
+++ b/cpu/arm920t/imx/interrupts.c
@@ -60,7 +60,7 @@ void reset_timer (void)
 
 ulong get_timer (ulong base)
 {
-	return get_timer_masked ();
+	return get_timer_masked() - base;
 }
 
 void set_timer (ulong t)
@@ -112,7 +112,7 @@ ulong get_tbclk (void)
 {
 	ulong tbclk;
 
-	tbclk = CFG_HZ;
+	tbclk = CONFIG_SYS_HZ;
 
 	return tbclk;
 }
diff --git a/cpu/arm920t/imx/serial.c b/cpu/arm920t/imx/serial.c
index 6c56acbfd..85f1167e3 100644
--- a/cpu/arm920t/imx/serial.c
+++ b/cpu/arm920t/imx/serial.c
@@ -52,6 +52,8 @@ struct imx_serial {
 	volatile uint32_t uts;
 };
 
+DECLARE_GLOBAL_DATA_PTR;
+
 void serial_setbrg (void)
 {
 	serial_init();
@@ -67,6 +69,9 @@ extern void imx_gpio_mode(int gpio_mode);
 int serial_init (void)
 {
 	volatile struct imx_serial* base = (struct imx_serial *)UART_BASE;
+	unsigned int ufcr_rfdiv;
+	unsigned int refclk;
+
 #ifdef CONFIG_IMX_SERIAL1
 	imx_gpio_mode(PC11_PF_UART1_TXD);
 	imx_gpio_mode(PC12_PF_UART1_RXD);
@@ -95,11 +100,33 @@ int serial_init (void)
 	/* Configure FIFOs */
 	base->ufcr = 0xa81;
 
+	/* set the baud rate.
+	 *
+	 * baud * 16   x
+	 * --------- = -
+	 *  refclk     y
+	 *
+	 * x - 1 = UBIR
+	 * y - 1 = UBMR
+	 *
+	 * each register is 16 bits wide. refclk max is 96 MHz
+	 *
+	 */
+
+	ufcr_rfdiv = ((base->ufcr) & UFCR_RFDIV) >> 7;
+	if (ufcr_rfdiv == 6)
+		ufcr_rfdiv = 7;
+	else
+		ufcr_rfdiv = 6 - ufcr_rfdiv;
+
+	refclk = get_PERCLK1();
+	refclk /= ufcr_rfdiv;
+
 	/* Set the numerator value minus one of the BRM ratio */
-	base->ubir = (CONFIG_BAUDRATE / 100) - 1;
+	base->ubir = (gd->baudrate / 100) - 1;
 
 	/* Set the denominator value minus one of the BRM ratio	*/
-	base->ubmr = 10000 - 1;
+	base->ubmr = (refclk/(16 * 100)) - 1;
 
 	/* Set to 8N1 */
 	base->ucr2 &= ~UCR2_PREN;
@@ -117,22 +144,21 @@ int serial_init (void)
 
 	/* Clear status flags */
 	base->usr2 |= USR2_ADET  |
-	          USR2_DTRF  |
-	          USR2_IDLE  |
-	          USR2_IRINT |
-	          USR2_WAKE  |
-	          USR2_RTSF  |
-	          USR2_BRCD  |
-	          USR2_ORE   |
-	          USR2_RDR;
+		      USR2_DTRF  |
+		      USR2_IDLE  |
+		      USR2_IRINT |
+		      USR2_WAKE  |
+		      USR2_RTSF  |
+		      USR2_BRCD  |
+		      USR2_ORE;
 
 	/* Clear status flags */
 	base->usr1 |= USR1_PARITYERR |
-	          USR1_RTSD      |
-	          USR1_ESCF      |
-	          USR1_FRAMERR   |
-	          USR1_AIRINT    |
-	          USR1_AWAKE;
+		      USR1_RTSD      |
+		      USR1_ESCF      |
+		      USR1_FRAMERR   |
+		      USR1_AIRINT    |
+		      USR1_AWAKE;
 	return (0);
 }
 
diff --git a/cpu/arm920t/interrupts.c b/cpu/arm920t/interrupts.c
index c9cd066c9..09c54dbde 100644
--- a/cpu/arm920t/interrupts.c
+++ b/cpu/arm920t/interrupts.c
@@ -42,7 +42,7 @@ void do_irq (struct pt_regs *pt_regs)
 	/* ASSUMED to be a timer interrupt  */
 	/* Just clear it - count handled in */
 	/* integratorap.c                   */
-	*(volatile ulong *)(CFG_TIMERBASE + 0x0C) = 0;
+	*(volatile ulong *)(CONFIG_SYS_TIMERBASE + 0x0C) = 0;
 #else
 #error do_irq() not defined for this cpu type
 #endif
diff --git a/cpu/arm920t/s3c24x0/i2c.c b/cpu/arm920t/s3c24x0/i2c.c
index 374b68313..fba5cd1b5 100644
--- a/cpu/arm920t/s3c24x0/i2c.c
+++ b/cpu/arm920t/s3c24x0/i2c.c
@@ -384,7 +384,7 @@ int i2c_read (uchar chip, uint addr, int alen, uchar * buffer, int len)
 		xaddr[3] = addr & 0xFF;
 	}
 
-#ifdef CFG_I2C_EEPROM_ADDR_OVERFLOW
+#ifdef CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW
 	/*
 	 * EEPROM chips that implement "address overflow" are ones
 	 * like Catalyst 24WC04/08/16 which has 9/10/11 bits of
@@ -397,7 +397,7 @@ int i2c_read (uchar chip, uint addr, int alen, uchar * buffer, int len)
 	 * hidden in the chip address.
 	 */
 	if (alen > 0)
-		chip |= ((addr >> (alen * 8)) & CFG_I2C_EEPROM_ADDR_OVERFLOW);
+		chip |= ((addr >> (alen * 8)) & CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW);
 #endif
 	if ((ret =
 	     i2c_transfer (I2C_READ, chip << 1, &xaddr[4 - alen], alen,
@@ -423,7 +423,7 @@ int i2c_write (uchar chip, uint addr, int alen, uchar * buffer, int len)
 		xaddr[2] = (addr >> 8) & 0xFF;
 		xaddr[3] = addr & 0xFF;
 	}
-#ifdef CFG_I2C_EEPROM_ADDR_OVERFLOW
+#ifdef CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW
 	/*
 	 * EEPROM chips that implement "address overflow" are ones
 	 * like Catalyst 24WC04/08/16 which has 9/10/11 bits of
@@ -436,7 +436,7 @@ int i2c_write (uchar chip, uint addr, int alen, uchar * buffer, int len)
 	 * hidden in the chip address.
 	 */
 	if (alen > 0)
-		chip |= ((addr >> (alen * 8)) & CFG_I2C_EEPROM_ADDR_OVERFLOW);
+		chip |= ((addr >> (alen * 8)) & CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW);
 #endif
 	return (i2c_transfer
 		(I2C_WRITE, chip << 1, &xaddr[4 - alen], alen, buffer,
diff --git a/cpu/arm920t/s3c24x0/interrupts.c b/cpu/arm920t/s3c24x0/interrupts.c
index 7ad9fcbd5..11e680428 100644
--- a/cpu/arm920t/s3c24x0/interrupts.c
+++ b/cpu/arm920t/s3c24x0/interrupts.c
@@ -179,7 +179,7 @@ ulong get_tbclk (void)
 #elif defined(CONFIG_SBC2410X) || \
       defined(CONFIG_SMDK2410) || \
       defined(CONFIG_VCMA9)
-	tbclk = CFG_HZ;
+	tbclk = CONFIG_SYS_HZ;
 #else
 #	error "tbclk not configured"
 #endif
diff --git a/cpu/arm920t/s3c24x0/usb.c b/cpu/arm920t/s3c24x0/usb.c
index 421ebb437..9ccf57596 100644
--- a/cpu/arm920t/s3c24x0/usb.c
+++ b/cpu/arm920t/s3c24x0/usb.c
@@ -23,7 +23,7 @@
 
 #include <common.h>
 
-#if defined(CONFIG_USB_OHCI_NEW) && defined(CFG_USB_OHCI_CPU_INIT)
+#if defined(CONFIG_USB_OHCI_NEW) && defined(CONFIG_SYS_USB_OHCI_CPU_INIT)
 # if defined(CONFIG_S3C2400) || defined(CONFIG_S3C2410)
 
 #if defined(CONFIG_S3C2400)
@@ -69,4 +69,4 @@ int usb_cpu_init_fail (void)
 }
 
 # endif /* defined(CONFIG_S3C2400) || defined(CONFIG_S3C2410) */
-#endif /* defined(CONFIG_USB_OHCI_NEW) && defined(CFG_USB_OHCI_CPU_INIT) */
+#endif /* defined(CONFIG_USB_OHCI_NEW) && defined(CONFIG_SYS_USB_OHCI_CPU_INIT) */
diff --git a/cpu/arm920t/s3c24x0/usb_ohci.c b/cpu/arm920t/s3c24x0/usb_ohci.c
index b57c2d895..641f27049 100644
--- a/cpu/arm920t/s3c24x0/usb_ohci.c
+++ b/cpu/arm920t/s3c24x0/usb_ohci.c
@@ -654,7 +654,7 @@ static void td_fill (ohci_t *ohci, unsigned int info,
 	td->index = index;
 	td->data = (__u32)data;
 #ifdef OHCI_FILL_TRACE
-	if ((usb_pipetype(urb_priv->pipe) == PIPE_BULK) && usb_pipeout(urb_priv->pipe)) {
+	if (usb_pipebulk(urb_priv->pipe) && usb_pipeout(urb_priv->pipe)) {
 		for (i = 0; i < len; i++)
 		printf("td->data[%d] %#2x ",i, ((unsigned char *)td->data)[i]);
 		printf("\n");
@@ -756,7 +756,7 @@ static void dl_transfer_length(td_t * td)
 	tdCBP  = m32_swap (td->hwCBP);
 
 
-	if (!(usb_pipetype (lurb_priv->pipe) == PIPE_CONTROL &&
+	if (!(usb_pipecontrol(lurb_priv->pipe) &&
 	    ((td->index == 0) || (td->index == lurb_priv->length - 1)))) {
 		if (tdBE != 0) {
 			if (td->hwCBP == 0)
@@ -1025,7 +1025,7 @@ pkt_print(dev, pipe, buffer, transfer_len, cmd, "SUB(rh)", usb_pipein(pipe));
 #else
 	wait_ms(1);
 #endif
-	if ((pipe & PIPE_INTERRUPT) == PIPE_INTERRUPT) {
+	if (usb_pipeint(pipe)) {
 		info("Root-Hub submit IRQ: NOT implemented");
 		return 0;
 	}
@@ -1259,7 +1259,7 @@ int submit_common_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
 
 	/* allow more time for a BULK device to react - some are slow */
 #define BULK_TO	 5000	/* timeout in milliseconds */
-	if (usb_pipetype (pipe) == PIPE_BULK)
+	if (usb_pipebulk(pipe))
 		timeout = BULK_TO;
 	else
 		timeout = 100;
diff --git a/cpu/arm920t/start.S b/cpu/arm920t/start.S
index 62231f856..fbcfe6dbc 100644
--- a/cpu/arm920t/start.S
+++ b/cpu/arm920t/start.S
@@ -24,7 +24,6 @@
  * MA 02111-1307 USA
  */
 
-
 #include <config.h>
 #include <version.h>
 #include <status_led.h>
@@ -119,7 +118,7 @@ start_code:
 	bl coloured_LED_init
 	bl red_LED_on
 
-#if	defined(CONFIG_AT91RM9200DK) || defined(CONFIG_AT91RM9200EK) || defined(CONFIG_AT91RM9200DF)
+#if	defined(CONFIG_AT91RM9200DK) || defined(CONFIG_AT91RM9200EK)
 	/*
 	 * relocate exception table
 	 */
@@ -178,8 +177,6 @@ copyex:
 	bl	cpu_init_crit
 #endif
 
-#ifndef	CONFIG_AT91RM9200
-
 #ifndef CONFIG_SKIP_RELOCATE_UBOOT
 relocate:				/* relocate U-Boot to RAM	    */
 	adr	r0, _start		/* r0 <- current position of code   */
@@ -198,12 +195,12 @@ copy_loop:
 	cmp	r0, r2			/* until source end addreee [r2]    */
 	ble	copy_loop
 #endif	/* CONFIG_SKIP_RELOCATE_UBOOT */
-#endif
+
 	/* Set up the stack						    */
 stack_setup:
 	ldr	r0, _TEXT_BASE		/* upper 128 KiB: relocated uboot   */
-	sub	r0, r0, #CFG_MALLOC_LEN	/* malloc area                      */
-	sub	r0, r0, #CFG_GBL_DATA_SIZE /* bdinfo                        */
+	sub	r0, r0, #CONFIG_SYS_MALLOC_LEN	/* malloc area                      */
+	sub	r0, r0, #CONFIG_SYS_GBL_DATA_SIZE /* bdinfo                        */
 #ifdef CONFIG_USE_IRQ
 	sub	r0, r0, #(CONFIG_STACKSIZE_IRQ+CONFIG_STACKSIZE_FIQ)
 #endif
@@ -261,7 +258,7 @@ cpu_init_crit:
 	 * find a lowlevel_init.S in your board directory.
 	 */
 	mov	ip, lr
-#if	defined(CONFIG_AT91RM9200DK) || defined(CONFIG_AT91RM9200EK) || defined(CONFIG_AT91RM9200DF)
+#if	defined(CONFIG_AT91RM9200EK)
 
 #else
 	bl	lowlevel_init
@@ -315,8 +312,9 @@ cpu_init_crit:
 	sub	sp, sp, #S_FRAME_SIZE
 	stmia	sp, {r0 - r12}			@ Calling r0-r12
 	ldr	r2, _armboot_start
-	sub	r2, r2, #(CONFIG_STACKSIZE+CFG_MALLOC_LEN)
-	sub	r2, r2, #(CFG_GBL_DATA_SIZE+8)  @ set base 2 words into abort stack
+	sub	r2, r2, #(CONFIG_STACKSIZE)
+	sub	r2, r2, #(CONFIG_SYS_MALLOC_LEN)
+	sub	r2, r2, #(CONFIG_SYS_GBL_DATA_SIZE+8)  @ set base 2 words into abort stack
 	ldmia	r2, {r2 - r3}			@ get pc, cpsr
 	add	r0, sp, #S_FRAME_SIZE		@ restore sp_SVC
 
@@ -348,8 +346,9 @@ cpu_init_crit:
 
 	.macro get_bad_stack
 	ldr	r13, _armboot_start		@ setup our mode stack
-	sub	r13, r13, #(CONFIG_STACKSIZE+CFG_MALLOC_LEN)
-	sub	r13, r13, #(CFG_GBL_DATA_SIZE+8) @ reserved a couple spots in abort stack
+	sub	r13, r13, #(CONFIG_STACKSIZE)
+	sub	r13, r13, #(CONFIG_SYS_MALLOC_LEN)
+	sub	r13, r13, #(CONFIG_SYS_GBL_DATA_SIZE+8) @ reserved a couple spots in abort stack
 
 	str	lr, [r13]			@ save caller lr / spsr
 	mrs	lr, spsr
diff --git a/cpu/arm925t/config.mk b/cpu/arm925t/config.mk
index 8db4adbe1..38718a352 100644
--- a/cpu/arm925t/config.mk
+++ b/cpu/arm925t/config.mk
@@ -31,4 +31,5 @@ PLATFORM_CPPFLAGS += -march=armv4
 #
 # =========================================================================
 PLATFORM_CPPFLAGS +=$(call cc-option,-mapcs-32,-mabi=apcs-gnu)
+PLATFORM_CPPFLAGS +=$(call cc-option,-mno-thumb-interwork,)
 PLATFORM_RELFLAGS +=$(call cc-option,-mshort-load-bytes,$(call cc-option,-malignment-traps,))
diff --git a/cpu/arm925t/cpu.c b/cpu/arm925t/cpu.c
index d85b7fad3..b9f09318a 100644
--- a/cpu/arm925t/cpu.c
+++ b/cpu/arm925t/cpu.c
@@ -95,7 +95,7 @@ int cpu_init (void)
 	 * setup up stacks if necessary
 	 */
 #ifdef CONFIG_USE_IRQ
-	IRQ_STACK_START = _armboot_start - CFG_MALLOC_LEN - CFG_GBL_DATA_SIZE - 4;
+	IRQ_STACK_START = _armboot_start - CONFIG_SYS_MALLOC_LEN - CONFIG_SYS_GBL_DATA_SIZE - 4;
 	FIQ_STACK_START = IRQ_STACK_START - CONFIG_STACKSIZE_IRQ;
 #endif
 	return 0;
diff --git a/cpu/arm925t/interrupts.c b/cpu/arm925t/interrupts.c
index 208a25bd9..3ef455447 100644
--- a/cpu/arm925t/interrupts.c
+++ b/cpu/arm925t/interrupts.c
@@ -39,7 +39,7 @@
 #define TIMER_LOAD_VAL 0xffffffff
 
 /* macro to read the 32 bit timer */
-#define READ_TIMER (*(volatile ulong *)(CFG_TIMERBASE+8))
+#define READ_TIMER (*(volatile ulong *)(CONFIG_SYS_TIMERBASE+8))
 
 static ulong timestamp;
 static ulong lastdec;
@@ -50,9 +50,9 @@ int interrupt_init (void)
 	int32_t val;
 
 	/* Start the decrementer ticking down from 0xffffffff */
-	*((int32_t *) (CFG_TIMERBASE + LOAD_TIM)) = TIMER_LOAD_VAL;
-	val = MPUTIM_ST | MPUTIM_AR | MPUTIM_CLOCK_ENABLE | (CFG_PVT << MPUTIM_PTV_BIT);
-	*((int32_t *) (CFG_TIMERBASE + CNTL_TIMER)) = val;
+	*((int32_t *) (CONFIG_SYS_TIMERBASE + LOAD_TIM)) = TIMER_LOAD_VAL;
+	val = MPUTIM_ST | MPUTIM_AR | MPUTIM_CLOCK_ENABLE | (CONFIG_SYS_PVT << MPUTIM_PTV_BIT);
+	*((int32_t *) (CONFIG_SYS_TIMERBASE + CNTL_TIMER)) = val;
 
 	/* init the timestamp and lastdec value */
 	reset_timer_masked();
@@ -86,10 +86,10 @@ void udelay (unsigned long usec)
 
 	if(usec >= 1000){		/* if "big" number, spread normalization to seconds */
 		tmo = usec / 1000;	/* start to normalize for usec to ticks per sec */
-		tmo *= CFG_HZ;		/* find number of "ticks" to wait to achieve target */
+		tmo *= CONFIG_SYS_HZ;		/* find number of "ticks" to wait to achieve target */
 		tmo /= 1000;		/* finish normalize. */
 	}else{				/* else small number, don't kill it prior to HZ multiply */
-		tmo = usec * CFG_HZ;
+		tmo = usec * CONFIG_SYS_HZ;
 		tmo /= (1000*1000);
 	}
 
@@ -145,10 +145,10 @@ void udelay_masked (unsigned long usec)
 
 	if (usec >= 1000) {		/* if "big" number, spread normalization to seconds */
 		tmo = usec / 1000;	/* start to normalize for usec to ticks per sec */
-		tmo *= CFG_HZ;		/* find number of "ticks" to wait to achieve target */
+		tmo *= CONFIG_SYS_HZ;		/* find number of "ticks" to wait to achieve target */
 		tmo /= 1000;		/* finish normalize. */
 	} else {			/* else small number, don't kill it prior to HZ multiply */
-		tmo = usec * CFG_HZ;
+		tmo = usec * CONFIG_SYS_HZ;
 		tmo /= (1000*1000);
 	}
 
@@ -178,6 +178,6 @@ ulong get_tbclk (void)
 {
 	ulong tbclk;
 
-	tbclk = CFG_HZ;
+	tbclk = CONFIG_SYS_HZ;
 	return tbclk;
 }
diff --git a/cpu/arm925t/start.S b/cpu/arm925t/start.S
index 5ddda54bd..c48014d14 100644
--- a/cpu/arm925t/start.S
+++ b/cpu/arm925t/start.S
@@ -190,8 +190,8 @@ copy_loop:
 	/* Set up the stack						    */
 stack_setup:
 	ldr	r0, _TEXT_BASE		/* upper 128 KiB: relocated uboot   */
-	sub	r0, r0, #CFG_MALLOC_LEN	/* malloc area                      */
-	sub	r0, r0, #CFG_GBL_DATA_SIZE /* bdinfo                        */
+	sub	r0, r0, #CONFIG_SYS_MALLOC_LEN	/* malloc area                      */
+	sub	r0, r0, #CONFIG_SYS_GBL_DATA_SIZE /* bdinfo                        */
 #ifdef CONFIG_USE_IRQ
 	sub	r0, r0, #(CONFIG_STACKSIZE_IRQ+CONFIG_STACKSIZE_FIQ)
 #endif
@@ -295,8 +295,8 @@ cpu_init_crit:
 	stmia	sp, {r0 - r12}			@ Save user registers (now in svc mode) r0-r12
 
 	ldr	r2, _armboot_start
-	sub	r2, r2, #(CONFIG_STACKSIZE+CFG_MALLOC_LEN)
-	sub	r2, r2, #(CFG_GBL_DATA_SIZE+8)  @ set base 2 words into abort stack
+	sub	r2, r2, #(CONFIG_STACKSIZE+CONFIG_SYS_MALLOC_LEN)
+	sub	r2, r2, #(CONFIG_SYS_GBL_DATA_SIZE+8)  @ set base 2 words into abort stack
 	ldmia	r2, {r2 - r3}                   @ get values for "aborted" pc and cpsr (into parm regs)
 	add	r0, sp, #S_FRAME_SIZE		@ grab pointer to old stack
 
@@ -328,8 +328,8 @@ cpu_init_crit:
 
 	.macro get_bad_stack
 	ldr	r13, _armboot_start		@ setup our mode stack
-	sub	r13, r13, #(CONFIG_STACKSIZE+CFG_MALLOC_LEN)
-	sub	r13, r13, #(CFG_GBL_DATA_SIZE+8) @ reserved a couple spots in abort stack
+	sub	r13, r13, #(CONFIG_STACKSIZE+CONFIG_SYS_MALLOC_LEN)
+	sub	r13, r13, #(CONFIG_SYS_GBL_DATA_SIZE+8) @ reserved a couple spots in abort stack
 
 	str	lr, [r13]			@ save caller lr in position 0 of saved stack
 	mrs	lr, spsr                        @ get the spsr
diff --git a/cpu/arm926ejs/Makefile b/cpu/arm926ejs/Makefile
index 0facce470..d5ac7d3fd 100644
--- a/cpu/arm926ejs/Makefile
+++ b/cpu/arm926ejs/Makefile
@@ -26,7 +26,7 @@ include $(TOPDIR)/config.mk
 LIB	= $(obj)lib$(CPU).a
 
 START	= start.o
-COBJS	= interrupts.o cpu.o cpuinfo.o
+COBJS	= interrupts.o cpu.o
 
 SRCS	:= $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c)
 OBJS	:= $(addprefix $(obj),$(COBJS) $(SOBJS))
diff --git a/cpu/arm926ejs/at91/Makefile b/cpu/arm926ejs/at91/Makefile
index 44cde1a9c..2d2a888e9 100644
--- a/cpu/arm926ejs/at91/Makefile
+++ b/cpu/arm926ejs/at91/Makefile
@@ -25,7 +25,6 @@ include $(TOPDIR)/config.mk
 
 LIB	= $(obj)lib$(SOC).a
 
-COBJS-y	+= ether.o
 COBJS-y	+= timer.o
 COBJS-$(CONFIG_HAS_DATAFLASH) +=spi.o
 COBJS-y	+= usb.o
diff --git a/cpu/arm926ejs/at91/config.mk b/cpu/arm926ejs/at91/config.mk
index 31491a843..06177e6c3 100644
--- a/cpu/arm926ejs/at91/config.mk
+++ b/cpu/arm926ejs/at91/config.mk
@@ -1,3 +1,2 @@
-PLATFORM_CPPFLAGS += -march=armv5te
 PLATFORM_CPPFLAGS += $(call cc-option,-mtune=arm926ejs,)
 LDSCRIPT := $(SRCTREE)/cpu/arm926ejs/at91/u-boot.lds
diff --git a/cpu/arm926ejs/at91/spi.c b/cpu/arm926ejs/at91/spi.c
index c9fe6d8a3..3eb252c5b 100644
--- a/cpu/arm926ejs/at91/spi.c
+++ b/cpu/arm926ejs/at91/spi.c
@@ -48,7 +48,7 @@ void AT91F_SpiInit(void)
 	       ((AT91_MASTER_CLOCK / AT91_SPI_CLK) << 8),
 	       AT91_BASE_SPI + AT91_SPI_CSR(0));
 
-#ifdef CFG_DATAFLASH_LOGIC_ADDR_CS1
+#ifdef CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS1
 	/* Configure CS1 */
 	writel(AT91_SPI_NCPHA |
 	       (AT91_SPI_DLYBS & DATAFLASH_TCSS) |
@@ -57,7 +57,7 @@ void AT91F_SpiInit(void)
 	       AT91_BASE_SPI + AT91_SPI_CSR(1));
 #endif
 
-#ifdef CFG_DATAFLASH_LOGIC_ADDR_CS3
+#ifdef CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS3
 	/* Configure CS3 */
 	writel(AT91_SPI_NCPHA |
 	       (AT91_SPI_DLYBS & DATAFLASH_TCSS) |
@@ -144,11 +144,11 @@ unsigned int AT91F_SpiWrite(AT91PS_DataflashDesc pDesc)
 
 	writel(AT91_SPI_TXTEN + AT91_SPI_RXTEN, AT91_BASE_SPI + AT91_SPI_PTCR);
 	while (!(readl(AT91_BASE_SPI + AT91_SPI_SR) & AT91_SPI_RXBUFF) &&
-		((timeout = get_timer_masked()) < CFG_SPI_WRITE_TOUT));
+		((timeout = get_timer_masked()) < CONFIG_SYS_SPI_WRITE_TOUT));
 	writel(AT91_SPI_TXTDIS + AT91_SPI_RXTDIS, AT91_BASE_SPI + AT91_SPI_PTCR);
 	pDesc->state = IDLE;
 
-	if (timeout >= CFG_SPI_WRITE_TOUT) {
+	if (timeout >= CONFIG_SYS_SPI_WRITE_TOUT) {
 		printf("Error Timeout\n\r");
 		return DATAFLASH_ERROR;
 	}
diff --git a/cpu/arm926ejs/at91/timer.c b/cpu/arm926ejs/at91/timer.c
index c79ec7e7a..fec545b66 100644
--- a/cpu/arm926ejs/at91/timer.c
+++ b/cpu/arm926ejs/at91/timer.c
@@ -130,7 +130,7 @@ ulong get_tbclk(void)
 {
 	ulong tbclk;
 
-	tbclk = CFG_HZ;
+	tbclk = CONFIG_SYS_HZ;
 	return tbclk;
 }
 
diff --git a/cpu/arm926ejs/at91/u-boot.lds b/cpu/arm926ejs/at91/u-boot.lds
index 996f401f0..4778d1e03 100644
--- a/cpu/arm926ejs/at91/u-boot.lds
+++ b/cpu/arm926ejs/at91/u-boot.lds
@@ -52,6 +52,6 @@ SECTIONS
 
 	. = ALIGN(4);
 	__bss_start = .;
-	.bss : { *(.bss) }
+	.bss : { *(.bss) . = ALIGN(4); }
 	_end = .;
 }
diff --git a/cpu/arm926ejs/at91/usb.c b/cpu/arm926ejs/at91/usb.c
index 2a92f734d..a15ab1693 100644
--- a/cpu/arm926ejs/at91/usb.c
+++ b/cpu/arm926ejs/at91/usb.c
@@ -23,7 +23,7 @@
 
 #include <common.h>
 
-#if defined(CONFIG_USB_OHCI_NEW) && defined(CFG_USB_OHCI_CPU_INIT)
+#if defined(CONFIG_USB_OHCI_NEW) && defined(CONFIG_SYS_USB_OHCI_CPU_INIT)
 
 #include <asm/arch/hardware.h>
 #include <asm/arch/io.h>
@@ -31,6 +31,15 @@
 
 int usb_cpu_init(void)
 {
+
+#if defined(CONFIG_AT91CAP9) || defined(CONFIG_AT91SAM9260) || \
+    defined(CONFIG_AT91SAM9263)
+	/* Enable PLLB */
+	at91_sys_write(AT91_CKGR_PLLBR, CONFIG_SYS_AT91_PLLB);
+	while ((at91_sys_read(AT91_PMC_SR) & AT91_PMC_LOCKB) != AT91_PMC_LOCKB)
+		;
+#endif
+
 	/* Enable USB host clock. */
 	at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_UHP);
 #ifdef CONFIG_AT91SAM9261
@@ -51,6 +60,15 @@ int usb_cpu_stop(void)
 #else
 	at91_sys_write(AT91_PMC_SCDR, AT91_PMC_UHP);
 #endif
+
+#if defined(CONFIG_AT91CAP9) || defined(CONFIG_AT91SAM9260) || \
+    defined(CONFIG_AT91SAM9263)
+	/* Disable PLLB */
+	at91_sys_write(AT91_CKGR_PLLBR, 0);
+	while ((at91_sys_read(AT91_PMC_SR) & AT91_PMC_LOCKB) != 0)
+		;
+#endif
+
 	return 0;
 }
 
@@ -59,4 +77,4 @@ int usb_cpu_init_fail(void)
 	return usb_cpu_stop();
 }
 
-#endif /* defined(CONFIG_USB_OHCI) && defined(CFG_USB_OHCI_CPU_INIT) */
+#endif /* defined(CONFIG_USB_OHCI) && defined(CONFIG_SYS_USB_OHCI_CPU_INIT) */
diff --git a/cpu/arm926ejs/config.mk b/cpu/arm926ejs/config.mk
index 8db4adbe1..a57d03aa0 100644
--- a/cpu/arm926ejs/config.mk
+++ b/cpu/arm926ejs/config.mk
@@ -24,11 +24,12 @@
 PLATFORM_RELFLAGS += -fno-strict-aliasing  -fno-common -ffixed-r8 \
 	-msoft-float
 
-PLATFORM_CPPFLAGS += -march=armv4
+PLATFORM_CPPFLAGS += -march=armv5te
 # =========================================================================
 #
 # Supply options according to compiler version
 #
 # =========================================================================
 PLATFORM_CPPFLAGS +=$(call cc-option,-mapcs-32,-mabi=apcs-gnu)
+PLATFORM_CPPFLAGS +=$(call cc-option,-mno-thumb-interwork,)
 PLATFORM_RELFLAGS +=$(call cc-option,-mshort-load-bytes,$(call cc-option,-malignment-traps,))
diff --git a/cpu/arm926ejs/cpu.c b/cpu/arm926ejs/cpu.c
index 56c6289da..48a2c0bf2 100644
--- a/cpu/arm926ejs/cpu.c
+++ b/cpu/arm926ejs/cpu.c
@@ -95,7 +95,7 @@ int cpu_init (void)
 	 * setup up stacks if necessary
 	 */
 #ifdef CONFIG_USE_IRQ
-	IRQ_STACK_START = _armboot_start - CFG_MALLOC_LEN - CFG_GBL_DATA_SIZE - 4;
+	IRQ_STACK_START = _armboot_start - CONFIG_SYS_MALLOC_LEN - CONFIG_SYS_GBL_DATA_SIZE - 4;
 	FIQ_STACK_START = IRQ_STACK_START - CONFIG_STACKSIZE_IRQ;
 #endif
 	return 0;
diff --git a/cpu/arm926ejs/davinci/dp83848.c b/cpu/arm926ejs/davinci/dp83848.c
index 59f039b7c..c71c685f7 100644
--- a/cpu/arm926ejs/davinci/dp83848.c
+++ b/cpu/arm926ejs/davinci/dp83848.c
@@ -64,29 +64,16 @@ int dp83848_get_link_speed(int phy_addr)
 		return(0);
 
 	/* Speed doesn't matter, there is no setting for it in EMAC... */
-	if (tmp & DP83848_SPEED) {
-		if (tmp & DP83848_DUPLEX) {
-			/* set DM644x EMAC for Full Duplex  */
-			emac->MACCONTROL = EMAC_MACCONTROL_MIIEN_ENABLE | EMAC_MACCONTROL_FULLDUPLEX_ENABLE;
-		} else {
-			/*set DM644x EMAC for Half Duplex  */
-			emac->MACCONTROL = EMAC_MACCONTROL_MIIEN_ENABLE;
-		}
-
-		return(1);
+	if (tmp & DP83848_DUPLEX) {
+		/* set DM644x EMAC for Full Duplex  */
+		emac->MACCONTROL = EMAC_MACCONTROL_MIIEN_ENABLE |
+			EMAC_MACCONTROL_FULLDUPLEX_ENABLE;
 	} else {
-		if (tmp & DP83848_DUPLEX) {
-			/* set DM644x EMAC for Full Duplex  */
-			emac->MACCONTROL = EMAC_MACCONTROL_MIIEN_ENABLE | EMAC_MACCONTROL_FULLDUPLEX_ENABLE;
-		} else {
-			/*set DM644x EMAC for Half Duplex  */
-			emac->MACCONTROL = EMAC_MACCONTROL_MIIEN_ENABLE;
-		}
-
-		return(1);
+		/*set DM644x EMAC for Half Duplex  */
+		emac->MACCONTROL = EMAC_MACCONTROL_MIIEN_ENABLE;
 	}
 
-	return(0);
+	return(1);
 }
 
 
diff --git a/cpu/arm926ejs/davinci/i2c.c b/cpu/arm926ejs/davinci/i2c.c
index af9dc034c..3ba20ef18 100644
--- a/cpu/arm926ejs/davinci/i2c.c
+++ b/cpu/arm926ejs/davinci/i2c.c
@@ -104,7 +104,7 @@ void i2c_init(int speed, int slaveadd)
 	}
 
 	psc = 2;
-	div = (CFG_HZ_CLOCK / ((psc + 1) * speed)) - 10;	/* SCLL + SCLH */
+	div = (CONFIG_SYS_HZ_CLOCK / ((psc + 1) * speed)) - 10;	/* SCLL + SCLH */
 	REG(I2C_PSC) = psc;			/* 27MHz / (2 + 1) = 9MHz */
 	REG(I2C_SCLL) = (div * 50) / 100;	/* 50% Duty */
 	REG(I2C_SCLH) = div - REG(I2C_SCLL);
@@ -331,21 +331,4 @@ int i2c_write(u_int8_t chip, u_int32_t addr, int alen, u_int8_t *buf, int len)
 	return(0);
 }
 
-
-u_int8_t i2c_reg_read(u_int8_t chip, u_int8_t reg)
-{
-	u_int8_t	tmp;
-
-	i2c_read(chip, reg, 1, &tmp, 1);
-	return(tmp);
-}
-
-
-void i2c_reg_write(u_int8_t chip, u_int8_t reg, u_int8_t val)
-{
-	u_int8_t	tmp;
-
-	i2c_write(chip, reg, 1, &tmp, 1);
-}
-
 #endif /* CONFIG_DRIVER_DAVINCI_I2C */
diff --git a/cpu/arm926ejs/davinci/nand.c b/cpu/arm926ejs/davinci/nand.c
index 5a1da633d..014e2b0c1 100644
--- a/cpu/arm926ejs/davinci/nand.c
+++ b/cpu/arm926ejs/davinci/nand.c
@@ -44,14 +44,14 @@
 #include <common.h>
 #include <asm/io.h>
 
-#ifdef CFG_USE_NAND
+#ifdef CONFIG_SYS_USE_NAND
 #if !defined(CONFIG_NAND_LEGACY)
 
 #include <nand.h>
 #include <asm/arch/nand_defs.h>
 #include <asm/arch/emif_defs.h>
 
-extern struct nand_chip nand_dev_desc[CFG_MAX_NAND_DEVICE];
+extern struct nand_chip nand_dev_desc[CONFIG_SYS_MAX_NAND_DEVICE];
 
 static void nand_davinci_hwcontrol(struct mtd_info *mtd, int cmd, unsigned int ctrl)
 {
@@ -87,8 +87,11 @@ static void nand_davinci_select_chip(struct mtd_info *mtd, int chip)
 #endif
 }
 
-#ifdef CFG_NAND_HW_ECC
-#ifdef CFG_NAND_LARGEPAGE
+#ifdef CONFIG_SYS_NAND_HW_ECC
+#ifdef CONFIG_SYS_DAVINCI_BROKEN_ECC
+/* Linux-compatible ECC uses MTD defaults. */
+/* These layouts are not compatible with Linux or RBL/UBL. */
+#ifdef CONFIG_SYS_NAND_LARGEPAGE
 static struct nand_ecclayout davinci_nand_ecclayout = {
 	.eccbytes = 12,
 	.eccpos = {8, 9, 10, 24, 25, 26, 40, 41, 42, 56, 57, 58},
@@ -100,7 +103,7 @@ static struct nand_ecclayout davinci_nand_ecclayout = {
 		{.offset = 60, .length = 4}
 	}
 };
-#elif defined(CFG_NAND_SMALLPAGE)
+#elif defined(CONFIG_SYS_NAND_SMALLPAGE)
 static struct nand_ecclayout davinci_nand_ecclayout = {
 	.eccbytes = 3,
 	.eccpos = {0, 1, 2},
@@ -110,8 +113,9 @@ static struct nand_ecclayout davinci_nand_ecclayout = {
 	}
 };
 #else
-#error "Either CFG_NAND_LARGEPAGE or CFG_NAND_SMALLPAGE must be defined!"
+#error "Either CONFIG_SYS_NAND_LARGEPAGE or CONFIG_SYS_NAND_SMALLPAGE must be defined!"
 #endif
+#endif /* CONFIG_SYS_DAVINCI_BROKEN_ECC */
 
 static void nand_davinci_enable_hwecc(struct mtd_info *mtd, int mode)
 {
@@ -150,6 +154,15 @@ static u_int32_t nand_davinci_readecc(struct mtd_info *mtd, u_int32_t region)
 static int nand_davinci_calculate_ecc(struct mtd_info *mtd, const u_char *dat, u_char *ecc_code)
 {
 	u_int32_t		tmp;
+#ifdef CONFIG_SYS_DAVINCI_BROKEN_ECC
+	/*
+	 * This is not how you should read ECCs on large page Davinci devices.
+	 * The region parameter gets you ECCs for flash chips on different chip
+	 * selects, not the 4x512 byte pages in a 2048 byte page.
+	 *
+	 * Preserved for backwards compatibility though.
+	 */
+
 	int			region, n;
 	struct nand_chip	*this = mtd->priv;
 
@@ -163,9 +176,26 @@ static int nand_davinci_calculate_ecc(struct mtd_info *mtd, const u_char *dat, u
 		*ecc_code++ = ((tmp >> 8) & 0x0f) | ((tmp >> 20) & 0xf0);
 		region++;
 	}
+#else
+	const int region = 1;
+
+	tmp = nand_davinci_readecc(mtd, region);
+
+	/* Squeeze 4 bytes ECC into 3 bytes by removing RESERVED bits
+	 * and shifting. RESERVED bits are 31 to 28 and 15 to 12. */
+	tmp = (tmp & 0x00000fff) | ((tmp & 0x0fff0000) >> 4);
+
+	/* Invert so that erased block ECC is correct */
+	tmp = ~tmp;
+
+	*ecc_code++ = tmp;
+	*ecc_code++ = tmp >>  8;
+	*ecc_code++ = tmp >> 16;
+#endif /* CONFIG_SYS_DAVINCI_BROKEN_ECC */
 	return(0);
 }
 
+#ifdef CONFIG_SYS_DAVINCI_BROKEN_ECC
 static void nand_davinci_gen_true_ecc(u_int8_t *ecc_buf)
 {
 	u_int32_t	tmp = ecc_buf[0] | (ecc_buf[1] << 16) | ((ecc_buf[2] & 0xf0) << 20) | ((ecc_buf[2] & 0x0f) << 8);
@@ -282,13 +312,14 @@ static int nand_davinci_compare_ecc(u_int8_t *ecc_nand, u_int8_t *ecc_calc, u_in
 			return(-1);
 	}
 }
+#endif /* CONFIG_SYS_DAVINCI_BROKEN_ECC */
 
 static int nand_davinci_correct_data(struct mtd_info *mtd, u_char *dat, u_char *read_ecc, u_char *calc_ecc)
 {
-	struct nand_chip	*this;
+	struct nand_chip *this = mtd->priv;
+#ifdef CONFIG_SYS_DAVINCI_BROKEN_ECC
 	int			block_count = 0, i, rc;
 
-	this = mtd->priv;
 	block_count = (this->ecc.size/512);
 	for (i = 0; i < block_count; i++) {
 		if (memcmp(read_ecc, calc_ecc, 3) != 0) {
@@ -301,9 +332,44 @@ static int nand_davinci_correct_data(struct mtd_info *mtd, u_char *dat, u_char *
 		calc_ecc += 3;
 		dat += 512;
 	}
+#else
+	u_int32_t ecc_nand = read_ecc[0] | (read_ecc[1] << 8) |
+					  (read_ecc[2] << 16);
+	u_int32_t ecc_calc = calc_ecc[0] | (calc_ecc[1] << 8) |
+					  (calc_ecc[2] << 16);
+	u_int32_t diff = ecc_calc ^ ecc_nand;
+
+	if (diff) {
+		if ((((diff >> 12) ^ diff) & 0xfff) == 0xfff) {
+			/* Correctable error */
+			if ((diff >> (12 + 3)) < this->ecc.size) {
+				uint8_t find_bit = 1 << ((diff >> 12) & 7);
+				uint32_t find_byte = diff >> (12 + 3);
+
+				dat[find_byte] ^= find_bit;
+				MTDDEBUG(MTD_DEBUG_LEVEL0, "Correcting single "
+					 "bit ECC error at offset: %d, bit: "
+					 "%d\n", find_byte, find_bit);
+				return 1;
+			} else {
+				return -1;
+			}
+		} else if (!(diff & (diff - 1))) {
+			/* Single bit ECC error in the ECC itself,
+			   nothing to fix */
+			MTDDEBUG(MTD_DEBUG_LEVEL0, "Single bit ECC error in "
+				 "ECC.\n");
+			return 1;
+		} else {
+			/* Uncorrectable error */
+			MTDDEBUG(MTD_DEBUG_LEVEL0, "ECC UNCORRECTED_ERROR 1\n");
+			return -1;
+		}
+	}
+#endif /* CONFIG_SYS_DAVINCI_BROKEN_ECC */
 	return(0);
 }
-#endif
+#endif /* CONFIG_SYS_NAND_HW_ECC */
 
 static int nand_davinci_dev_ready(struct mtd_info *mtd)
 {
@@ -365,27 +431,32 @@ int board_nand_init(struct nand_chip *nand)
 	nand->IO_ADDR_W   = (void  __iomem *)NAND_CE0DATA;
 	nand->chip_delay  = 0;
 	nand->select_chip = nand_davinci_select_chip;
-#ifdef CFG_NAND_USE_FLASH_BBT
+#ifdef CONFIG_SYS_NAND_USE_FLASH_BBT
 	nand->options	  = NAND_USE_FLASH_BBT;
 #endif
-#ifdef CFG_NAND_HW_ECC
+#ifdef CONFIG_SYS_NAND_HW_ECC
 	nand->ecc.mode = NAND_ECC_HW;
-#ifdef CFG_NAND_LARGEPAGE
+#ifdef CONFIG_SYS_DAVINCI_BROKEN_ECC
+	nand->ecc.layout  = &davinci_nand_ecclayout;
+#ifdef CONFIG_SYS_NAND_LARGEPAGE
 	nand->ecc.size = 2048;
 	nand->ecc.bytes = 12;
-#elif defined(CFG_NAND_SMALLPAGE)
+#elif defined(CONFIG_SYS_NAND_SMALLPAGE)
 	nand->ecc.size = 512;
 	nand->ecc.bytes = 3;
 #else
-#error "Either CFG_NAND_LARGEPAGE or CFG_NAND_SMALLPAGE must be defined!"
+#error "Either CONFIG_SYS_NAND_LARGEPAGE or CONFIG_SYS_NAND_SMALLPAGE must be defined!"
 #endif
-	nand->ecc.layout  = &davinci_nand_ecclayout;
+#else
+	nand->ecc.size = 512;
+	nand->ecc.bytes = 3;
+#endif /* CONFIG_SYS_DAVINCI_BROKEN_ECC */
 	nand->ecc.calculate = nand_davinci_calculate_ecc;
 	nand->ecc.correct  = nand_davinci_correct_data;
 	nand->ecc.hwctl  = nand_davinci_enable_hwecc;
 #else
 	nand->ecc.mode = NAND_ECC_SOFT;
-#endif
+#endif /* CONFIG_SYS_NAND_HW_ECC */
 
 	/* Set address of hardware control function */
 	nand->cmd_ctrl = nand_davinci_hwcontrol;
@@ -401,4 +472,4 @@ int board_nand_init(struct nand_chip *nand)
 #else
 #error "U-Boot legacy NAND support not available for DaVinci chips"
 #endif
-#endif	/* CFG_USE_NAND */
+#endif	/* CONFIG_SYS_USE_NAND */
diff --git a/cpu/arm926ejs/davinci/timer.c b/cpu/arm926ejs/davinci/timer.c
index 6c670f0b7..773735a1c 100644
--- a/cpu/arm926ejs/davinci/timer.c
+++ b/cpu/arm926ejs/davinci/timer.c
@@ -54,9 +54,9 @@ typedef volatile struct {
 	u_int32_t	wdtcr;
 } davinci_timer;
 
-davinci_timer		*timer = (davinci_timer *)CFG_TIMERBASE;
+davinci_timer		*timer = (davinci_timer *)CONFIG_SYS_TIMERBASE;
 
-#define TIMER_LOAD_VAL	(CFG_HZ_CLOCK / CFG_HZ)
+#define TIMER_LOAD_VAL	(CONFIG_SYS_HZ_CLOCK / CONFIG_SYS_HZ)
 #define TIM_CLK_DIV	16
 
 static ulong timestamp;
@@ -117,7 +117,7 @@ void udelay(unsigned long usec)
 	ulong endtime;
 	signed long diff;
 
-	tmo = CFG_HZ_CLOCK / 1000;
+	tmo = CONFIG_SYS_HZ_CLOCK / 1000;
 	tmo *= usec;
 	tmo /= (1000 * TIM_CLK_DIV);
 
@@ -144,5 +144,5 @@ unsigned long long get_ticks(void)
  */
 ulong get_tbclk(void)
 {
-	return CFG_HZ;
+	return CONFIG_SYS_HZ;
 }
diff --git a/cpu/arm926ejs/omap/Makefile b/cpu/arm926ejs/omap/Makefile
index c335d5c86..74aea7418 100644
--- a/cpu/arm926ejs/omap/Makefile
+++ b/cpu/arm926ejs/omap/Makefile
@@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk
 
 LIB	= $(obj)lib$(SOC).a
 
-COBJS	= timer.o
+COBJS	= timer.o cpuinfo.o
 SOBJS	= reset.o
 
 SRCS	:= $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c)
diff --git a/cpu/arm926ejs/cpuinfo.c b/cpu/arm926ejs/omap/cpuinfo.c
index 35ba7dba0..35ba7dba0 100644
--- a/cpu/arm926ejs/cpuinfo.c
+++ b/cpu/arm926ejs/omap/cpuinfo.c
diff --git a/cpu/arm926ejs/omap/timer.c b/cpu/arm926ejs/omap/timer.c
index a2a9133ee..49e74abb3 100644
--- a/cpu/arm926ejs/omap/timer.c
+++ b/cpu/arm926ejs/omap/timer.c
@@ -41,7 +41,7 @@
 #define TIMER_LOAD_VAL 0xffffffff
 
 /* macro to read the 32 bit timer */
-#define READ_TIMER (*(volatile ulong *)(CFG_TIMERBASE+8))
+#define READ_TIMER (*(volatile ulong *)(CONFIG_SYS_TIMERBASE+8))
 
 static ulong timestamp;
 static ulong lastdec;
@@ -51,9 +51,9 @@ int timer_init (void)
 	int32_t val;
 
 	/* Start the decrementer ticking down from 0xffffffff */
-	*((int32_t *) (CFG_TIMERBASE + LOAD_TIM)) = TIMER_LOAD_VAL;
-	val = MPUTIM_ST | MPUTIM_AR | MPUTIM_CLOCK_ENABLE | (CFG_PVT << MPUTIM_PTV_BIT);
-	*((int32_t *) (CFG_TIMERBASE + CNTL_TIMER)) = val;
+	*((int32_t *) (CONFIG_SYS_TIMERBASE + LOAD_TIM)) = TIMER_LOAD_VAL;
+	val = MPUTIM_ST | MPUTIM_AR | MPUTIM_CLOCK_ENABLE | (CONFIG_SYS_PVT << MPUTIM_PTV_BIT);
+	*((int32_t *) (CONFIG_SYS_TIMERBASE + CNTL_TIMER)) = val;
 
 	/* init the timestamp and lastdec value */
 	reset_timer_masked();
@@ -87,10 +87,10 @@ void udelay (unsigned long usec)
 
 	if(usec >= 1000){		/* if "big" number, spread normalization to seconds */
 		tmo = usec / 1000;	/* start to normalize for usec to ticks per sec */
-		tmo *= CFG_HZ;		/* find number of "ticks" to wait to achieve target */
+		tmo *= CONFIG_SYS_HZ;		/* find number of "ticks" to wait to achieve target */
 		tmo /= 1000;		/* finish normalize. */
 	}else{				/* else small number, don't kill it prior to HZ multiply */
-		tmo = usec * CFG_HZ;
+		tmo = usec * CONFIG_SYS_HZ;
 		tmo /= (1000*1000);
 	}
 
@@ -140,10 +140,10 @@ void udelay_masked (unsigned long usec)
 
 	if (usec >= 1000) {		/* if "big" number, spread normalization to seconds */
 		tmo = usec / 1000;	/* start to normalize for usec to ticks per sec */
-		tmo *= CFG_HZ;		/* find number of "ticks" to wait to achieve target */
+		tmo *= CONFIG_SYS_HZ;		/* find number of "ticks" to wait to achieve target */
 		tmo /= 1000;		/* finish normalize. */
 	} else {			/* else small number, don't kill it prior to HZ multiply */
-		tmo = usec * CFG_HZ;
+		tmo = usec * CONFIG_SYS_HZ;
 		tmo /= (1000*1000);
 	}
 
@@ -172,6 +172,6 @@ ulong get_tbclk (void)
 {
 	ulong tbclk;
 
-	tbclk = CFG_HZ;
+	tbclk = CONFIG_SYS_HZ;
 	return tbclk;
 }
diff --git a/cpu/arm926ejs/start.S b/cpu/arm926ejs/start.S
index a61fa1847..ed4932a13 100644
--- a/cpu/arm926ejs/start.S
+++ b/cpu/arm926ejs/start.S
@@ -165,8 +165,8 @@ copy_loop:
 	/* Set up the stack						    */
 stack_setup:
 	ldr	r0, _TEXT_BASE		/* upper 128 KiB: relocated uboot   */
-	sub	r0, r0, #CFG_MALLOC_LEN	/* malloc area                      */
-	sub	r0, r0, #CFG_GBL_DATA_SIZE /* bdinfo                        */
+	sub	r0, r0, #CONFIG_SYS_MALLOC_LEN	/* malloc area                      */
+	sub	r0, r0, #CONFIG_SYS_GBL_DATA_SIZE /* bdinfo                        */
 #ifdef CONFIG_USE_IRQ
 	sub	r0, r0, #(CONFIG_STACKSIZE_IRQ+CONFIG_STACKSIZE_FIQ)
 #endif
@@ -276,8 +276,8 @@ cpu_init_crit:
 	stmia	sp, {r0 - r12}	@ Save user registers (now in svc mode) r0-r12
 
 	ldr	r2, _armboot_start
-	sub	r2, r2, #(CONFIG_STACKSIZE+CFG_MALLOC_LEN)
-	sub	r2, r2, #(CFG_GBL_DATA_SIZE+8)  @ set base 2 words into abort stack
+	sub	r2, r2, #(CONFIG_STACKSIZE+CONFIG_SYS_MALLOC_LEN)
+	sub	r2, r2, #(CONFIG_SYS_GBL_DATA_SIZE+8)  @ set base 2 words into abort stack
 	@ get values for "aborted" pc and cpsr (into parm regs)
 	ldmia	r2, {r2 - r3}
 	add	r0, sp, #S_FRAME_SIZE		@ grab pointer to old stack
@@ -310,8 +310,8 @@ cpu_init_crit:
 
 	.macro get_bad_stack
 	ldr	r13, _armboot_start		@ setup our mode stack
-	sub	r13, r13, #(CONFIG_STACKSIZE+CFG_MALLOC_LEN)
-	sub	r13, r13, #(CFG_GBL_DATA_SIZE+8) @ reserved a couple spots in abort stack
+	sub	r13, r13, #(CONFIG_STACKSIZE+CONFIG_SYS_MALLOC_LEN)
+	sub	r13, r13, #(CONFIG_SYS_GBL_DATA_SIZE+8) @ reserved a couple spots in abort stack
 
 	str	lr, [r13]	@ save caller lr in position 0 of saved stack
 	mrs	lr, spsr	@ get the spsr
diff --git a/cpu/arm926ejs/versatile/timer.c b/cpu/arm926ejs/versatile/timer.c
index f01f31850..9ac867ed0 100755
--- a/cpu/arm926ejs/versatile/timer.c
+++ b/cpu/arm926ejs/versatile/timer.c
@@ -41,7 +41,7 @@
 #define TIMER_LOAD_VAL 0xffffffff
 
 /* macro to read the 32 bit timer */
-#define READ_TIMER (*(volatile ulong *)(CFG_TIMERBASE+4))
+#define READ_TIMER (*(volatile ulong *)(CONFIG_SYS_TIMERBASE+4))
 
 static ulong timestamp;
 static ulong lastdec;
@@ -62,9 +62,9 @@ int timer_init (void)
 	ulong	tmr_ctrl_val;
 
 	/* 1st disable the Timer */
-	tmr_ctrl_val = *(volatile ulong *)(CFG_TIMERBASE + 8);
+	tmr_ctrl_val = *(volatile ulong *)(CONFIG_SYS_TIMERBASE + 8);
 	tmr_ctrl_val &= ~TIMER_ENABLE;
-	*(volatile ulong *)(CFG_TIMERBASE + 8) = tmr_ctrl_val;
+	*(volatile ulong *)(CONFIG_SYS_TIMERBASE + 8) = tmr_ctrl_val;
 
 	/*
 	 * The Timer Control Register has one Undefined/Shouldn't Use Bit
@@ -78,11 +78,11 @@ int timer_init (void)
 	 * Tmr Siz : 16 Bit Counter
 	 * Tmr in Wrapping Mode
 	 */
-	tmr_ctrl_val = *(volatile ulong *)(CFG_TIMERBASE + 8);
+	tmr_ctrl_val = *(volatile ulong *)(CONFIG_SYS_TIMERBASE + 8);
 	tmr_ctrl_val &= ~(TIMER_MODE_MSK | TIMER_INT_EN | TIMER_PRS_MSK | TIMER_SIZE_MSK | TIMER_ONE_SHT );
 	tmr_ctrl_val |= (TIMER_ENABLE | TIMER_PRS_8S);
 
-	*(volatile ulong *)(CFG_TIMERBASE + 8) = tmr_ctrl_val;
+	*(volatile ulong *)(CONFIG_SYS_TIMERBASE + 8) = tmr_ctrl_val;
 
 	/* init the timestamp and lastdec value */
 	reset_timer_masked();
@@ -116,10 +116,10 @@ void udelay (unsigned long usec)
 
 	if(usec >= 1000){		/* if "big" number, spread normalization to seconds */
 		tmo = usec / 1000;	/* start to normalize for usec to ticks per sec */
-		tmo *= CFG_HZ;		/* find number of "ticks" to wait to achieve target */
+		tmo *= CONFIG_SYS_HZ;		/* find number of "ticks" to wait to achieve target */
 		tmo /= 1000;		/* finish normalize. */
 	}else{				/* else small number, don't kill it prior to HZ multiply */
-		tmo = usec * CFG_HZ;
+		tmo = usec * CONFIG_SYS_HZ;
 		tmo /= (1000*1000);
 	}
 
@@ -169,10 +169,10 @@ void udelay_masked (unsigned long usec)
 
 	if (usec >= 1000) {		/* if "big" number, spread normalization to seconds */
 		tmo = usec / 1000;	/* start to normalize for usec to ticks per sec */
-		tmo *= CFG_HZ;		/* find number of "ticks" to wait to achieve target */
+		tmo *= CONFIG_SYS_HZ;		/* find number of "ticks" to wait to achieve target */
 		tmo /= 1000;		/* finish normalize. */
 	} else {			/* else small number, don't kill it prior to HZ multiply */
-		tmo = usec * CFG_HZ;
+		tmo = usec * CONFIG_SYS_HZ;
 		tmo /= (1000*1000);
 	}
 
@@ -201,6 +201,6 @@ ulong get_tbclk (void)
 {
 	ulong tbclk;
 
-	tbclk = CFG_HZ;
+	tbclk = CONFIG_SYS_HZ;
 	return tbclk;
 }
diff --git a/cpu/arm946es/config.mk b/cpu/arm946es/config.mk
index 81ca2885e..6190e16cb 100644
--- a/cpu/arm946es/config.mk
+++ b/cpu/arm946es/config.mk
@@ -25,3 +25,11 @@ PLATFORM_RELFLAGS += -fno-strict-aliasing  -fno-common -ffixed-r8 \
 	 -msoft-float
 
 PLATFORM_CPPFLAGS +=  -march=armv4
+# =========================================================================
+#
+# Supply options according to compiler version
+#
+# =========================================================================
+PLATFORM_CPPFLAGS +=$(call cc-option,-mapcs-32,-mabi=apcs-gnu)
+PLATFORM_CPPFLAGS +=$(call cc-option,-mno-thumb-interwork,)
+PLATFORM_RELFLAGS +=$(call cc-option,-mshort-load-bytes,$(call cc-option,-malignment-traps,))
diff --git a/cpu/arm946es/cpu.c b/cpu/arm946es/cpu.c
index 4c63a8dd8..44c589aef 100644
--- a/cpu/arm946es/cpu.c
+++ b/cpu/arm946es/cpu.c
@@ -95,7 +95,7 @@ int cpu_init (void)
 	 * setup up stacks if necessary
 	 */
 #ifdef CONFIG_USE_IRQ
-	IRQ_STACK_START = _armboot_start - CFG_MALLOC_LEN - CFG_GBL_DATA_SIZE - 4;
+	IRQ_STACK_START = _armboot_start - CONFIG_SYS_MALLOC_LEN - CONFIG_SYS_GBL_DATA_SIZE - 4;
 	FIQ_STACK_START = IRQ_STACK_START - CONFIG_STACKSIZE_IRQ;
 #endif
 	return 0;
diff --git a/cpu/arm946es/interrupts.c b/cpu/arm946es/interrupts.c
index a2c3646f1..c13d3099f 100644
--- a/cpu/arm946es/interrupts.c
+++ b/cpu/arm946es/interrupts.c
@@ -121,10 +121,10 @@ void udelay_masked (unsigned long usec)
 
 	if(usec >= 1000){               /* if "big" number, spread normalization to seconds */
 		tmo = usec / 1000;      /* start to normalize for usec to ticks per sec */
-		tmo *= CFG_HZ_CLOCK;    /* find number of "ticks" to wait to achieve target */
+		tmo *= CONFIG_SYS_HZ_CLOCK;    /* find number of "ticks" to wait to achieve target */
 		tmo /= 1000;            /* finish normalize. */
 	}else{                          /* else small number, don't kill it prior to HZ multiply */
-		tmo = usec * CFG_HZ_CLOCK;
+		tmo = usec * CONFIG_SYS_HZ_CLOCK;
 		tmo /= (1000*1000);
 	}
 
@@ -151,7 +151,7 @@ ulong get_tbclk (void)
 {
 	ulong tbclk;
 
-	tbclk = CFG_HZ;
+	tbclk = CONFIG_SYS_HZ;
 	return tbclk;
 }
 
diff --git a/cpu/arm946es/start.S b/cpu/arm946es/start.S
index 9e97f530f..7972b0076 100644
--- a/cpu/arm946es/start.S
+++ b/cpu/arm946es/start.S
@@ -157,8 +157,8 @@ copy_loop:
 	/* Set up the stack						    */
 stack_setup:
 	ldr	r0, _TEXT_BASE		/* upper 128 KiB: relocated uboot   */
-	sub	r0, r0, #CFG_MALLOC_LEN	/* malloc area                      */
-	sub	r0, r0, #CFG_GBL_DATA_SIZE /* bdinfo                        */
+	sub	r0, r0, #CONFIG_SYS_MALLOC_LEN	/* malloc area                      */
+	sub	r0, r0, #CONFIG_SYS_GBL_DATA_SIZE /* bdinfo                        */
 #ifdef CONFIG_USE_IRQ
 	sub	r0, r0, #(CONFIG_STACKSIZE_IRQ+CONFIG_STACKSIZE_FIQ)
 #endif
@@ -264,8 +264,8 @@ cpu_init_crit:
 	stmia	sp, {r0 - r12}	@ Save user registers (now in svc mode) r0-r12
 
 	ldr	r2, _armboot_start
-	sub	r2, r2, #(CONFIG_STACKSIZE+CFG_MALLOC_LEN)
-	sub	r2, r2, #(CFG_GBL_DATA_SIZE+8)  @ set base 2 words into abort stack
+	sub	r2, r2, #(CONFIG_STACKSIZE+CONFIG_SYS_MALLOC_LEN)
+	sub	r2, r2, #(CONFIG_SYS_GBL_DATA_SIZE+8)  @ set base 2 words into abort stack
 	@ get values for "aborted" pc and cpsr (into parm regs)
 	ldmia	r2, {r2 - r3}
 	add	r0, sp, #S_FRAME_SIZE		@ grab pointer to old stack
@@ -298,8 +298,8 @@ cpu_init_crit:
 
 	.macro get_bad_stack
 	ldr	r13, _armboot_start		@ setup our mode stack
-	sub	r13, r13, #(CONFIG_STACKSIZE+CFG_MALLOC_LEN)
-	sub	r13, r13, #(CFG_GBL_DATA_SIZE+8) @ reserved a couple spots in abort stack
+	sub	r13, r13, #(CONFIG_STACKSIZE+CONFIG_SYS_MALLOC_LEN)
+	sub	r13, r13, #(CONFIG_SYS_GBL_DATA_SIZE+8) @ reserved a couple spots in abort stack
 
 	str	lr, [r13]	@ save caller lr in position 0 of saved stack
 	mrs	lr, spsr	@ get the spsr
diff --git a/cpu/arm_intcm/config.mk b/cpu/arm_intcm/config.mk
index 81ca2885e..6190e16cb 100644
--- a/cpu/arm_intcm/config.mk
+++ b/cpu/arm_intcm/config.mk
@@ -25,3 +25,11 @@ PLATFORM_RELFLAGS += -fno-strict-aliasing  -fno-common -ffixed-r8 \
 	 -msoft-float
 
 PLATFORM_CPPFLAGS +=  -march=armv4
+# =========================================================================
+#
+# Supply options according to compiler version
+#
+# =========================================================================
+PLATFORM_CPPFLAGS +=$(call cc-option,-mapcs-32,-mabi=apcs-gnu)
+PLATFORM_CPPFLAGS +=$(call cc-option,-mno-thumb-interwork,)
+PLATFORM_RELFLAGS +=$(call cc-option,-mshort-load-bytes,$(call cc-option,-malignment-traps,))
diff --git a/cpu/arm_intcm/cpu.c b/cpu/arm_intcm/cpu.c
index e2309f889..ccf7fd5b6 100644
--- a/cpu/arm_intcm/cpu.c
+++ b/cpu/arm_intcm/cpu.c
@@ -43,7 +43,7 @@ int cpu_init (void)
 	 * setup up stacks if necessary
 	 */
 #ifdef CONFIG_USE_IRQ
-	IRQ_STACK_START = _armboot_start - CFG_MALLOC_LEN - CFG_GBL_DATA_SIZE - 4;
+	IRQ_STACK_START = _armboot_start - CONFIG_SYS_MALLOC_LEN - CONFIG_SYS_GBL_DATA_SIZE - 4;
 	FIQ_STACK_START = IRQ_STACK_START - CONFIG_STACKSIZE_IRQ;
 #endif
 	return 0;
diff --git a/cpu/arm_intcm/start.S b/cpu/arm_intcm/start.S
index d5778a046..ee0804ae1 100644
--- a/cpu/arm_intcm/start.S
+++ b/cpu/arm_intcm/start.S
@@ -155,8 +155,8 @@ copy_loop:
 	/* Set up the stack						    */
 stack_setup:
 	ldr	r0, _TEXT_BASE		/* upper 128 KiB: relocated uboot   */
-	sub	r0, r0, #CFG_MALLOC_LEN	/* malloc area                      */
-	sub	r0, r0, #CFG_GBL_DATA_SIZE /* bdinfo                        */
+	sub	r0, r0, #CONFIG_SYS_MALLOC_LEN	/* malloc area                      */
+	sub	r0, r0, #CONFIG_SYS_GBL_DATA_SIZE /* bdinfo                        */
 #ifdef CONFIG_USE_IRQ
 	sub	r0, r0, #(CONFIG_STACKSIZE_IRQ+CONFIG_STACKSIZE_FIQ)
 #endif
@@ -240,8 +240,8 @@ cpu_init_crit:
 	stmia	sp, {r0 - r12}	@ Save user registers (now in svc mode) r0-r12
 
 	ldr	r2, _armboot_start
-	sub	r2, r2, #(CONFIG_STACKSIZE+CFG_MALLOC_LEN)
-	sub	r2, r2, #(CFG_GBL_DATA_SIZE+8)  @ set base 2 words into abort stack
+	sub	r2, r2, #(CONFIG_STACKSIZE+CONFIG_SYS_MALLOC_LEN)
+	sub	r2, r2, #(CONFIG_SYS_GBL_DATA_SIZE+8)  @ set base 2 words into abort stack
 	@ get values for "aborted" pc and cpsr (into parm regs)
 	ldmia	r2, {r2 - r3}
 	add	r0, sp, #S_FRAME_SIZE		@ grab pointer to old stack
@@ -274,8 +274,8 @@ cpu_init_crit:
 
 	.macro get_bad_stack
 	ldr	r13, _armboot_start		@ setup our mode stack
-	sub	r13, r13, #(CONFIG_STACKSIZE+CFG_MALLOC_LEN)
-	sub	r13, r13, #(CFG_GBL_DATA_SIZE+8) @ reserved a couple spots in abort stack
+	sub	r13, r13, #(CONFIG_STACKSIZE+CONFIG_SYS_MALLOC_LEN)
+	sub	r13, r13, #(CONFIG_SYS_GBL_DATA_SIZE+8) @ reserved a couple spots in abort stack
 
 	str	lr, [r13]	@ save caller lr in position 0 of saved stack
 	mrs	lr, spsr	@ get the spsr
diff --git a/cpu/at32ap/at32ap700x/clk.c b/cpu/at32ap/at32ap700x/clk.c
index a6a6c885e..2c2e19c29 100644
--- a/cpu/at32ap/at32ap700x/clk.c
+++ b/cpu/at32ap/at32ap700x/clk.c
@@ -39,10 +39,10 @@ void clk_init(void)
 
 #ifdef CONFIG_PLL
 	/* Initialize the PLL */
-	sm_writel(PM_PLL0, (SM_BF(PLLCOUNT, CFG_PLL0_SUPPRESS_CYCLES)
-			    | SM_BF(PLLMUL, CFG_PLL0_MUL - 1)
-			    | SM_BF(PLLDIV, CFG_PLL0_DIV - 1)
-			    | SM_BF(PLLOPT, CFG_PLL0_OPT)
+	sm_writel(PM_PLL0, (SM_BF(PLLCOUNT, CONFIG_SYS_PLL0_SUPPRESS_CYCLES)
+			    | SM_BF(PLLMUL, CONFIG_SYS_PLL0_MUL - 1)
+			    | SM_BF(PLLDIV, CONFIG_SYS_PLL0_DIV - 1)
+			    | SM_BF(PLLOPT, CONFIG_SYS_PLL0_OPT)
 			    | SM_BF(PLLOSC, 0)
 			    | SM_BIT(PLLEN)));
 
@@ -52,14 +52,14 @@ void clk_init(void)
 
 	/* Set up clocks for the CPU and all peripheral buses */
 	cksel = 0;
-	if (CFG_CLKDIV_CPU)
-		cksel |= SM_BIT(CPUDIV) | SM_BF(CPUSEL, CFG_CLKDIV_CPU - 1);
-	if (CFG_CLKDIV_HSB)
-		cksel |= SM_BIT(HSBDIV) | SM_BF(HSBSEL, CFG_CLKDIV_HSB - 1);
-	if (CFG_CLKDIV_PBA)
-		cksel |= SM_BIT(PBADIV) | SM_BF(PBASEL, CFG_CLKDIV_PBA - 1);
-	if (CFG_CLKDIV_PBB)
-		cksel |= SM_BIT(PBBDIV) | SM_BF(PBBSEL, CFG_CLKDIV_PBB - 1);
+	if (CONFIG_SYS_CLKDIV_CPU)
+		cksel |= SM_BIT(CPUDIV) | SM_BF(CPUSEL, CONFIG_SYS_CLKDIV_CPU - 1);
+	if (CONFIG_SYS_CLKDIV_HSB)
+		cksel |= SM_BIT(HSBDIV) | SM_BF(HSBSEL, CONFIG_SYS_CLKDIV_HSB - 1);
+	if (CONFIG_SYS_CLKDIV_PBA)
+		cksel |= SM_BIT(PBADIV) | SM_BF(PBASEL, CONFIG_SYS_CLKDIV_PBA - 1);
+	if (CONFIG_SYS_CLKDIV_PBB)
+		cksel |= SM_BIT(PBBDIV) | SM_BF(PBBSEL, CONFIG_SYS_CLKDIV_PBB - 1);
 	sm_writel(PM_CKSEL, cksel);
 
 #ifdef CONFIG_PLL
diff --git a/cpu/at32ap/cache.c b/cpu/at32ap/cache.c
index 41fb5aa04..16a0565df 100644
--- a/cpu/at32ap/cache.c
+++ b/cpu/at32ap/cache.c
@@ -28,7 +28,7 @@ void dcache_clean_range(volatile void *start, size_t size)
 {
 	unsigned long v, begin, end, linesz;
 
-	linesz = CFG_DCACHE_LINESZ;
+	linesz = CONFIG_SYS_DCACHE_LINESZ;
 
 	/* You asked for it, you got it */
 	begin = (unsigned long)start & ~(linesz - 1);
@@ -44,7 +44,7 @@ void dcache_invalidate_range(volatile void *start, size_t size)
 {
 	unsigned long v, begin, end, linesz;
 
-	linesz = CFG_DCACHE_LINESZ;
+	linesz = CONFIG_SYS_DCACHE_LINESZ;
 
 	/* You asked for it, you got it */
 	begin = (unsigned long)start & ~(linesz - 1);
@@ -58,7 +58,7 @@ void dcache_flush_range(volatile void *start, size_t size)
 {
 	unsigned long v, begin, end, linesz;
 
-	linesz = CFG_DCACHE_LINESZ;
+	linesz = CONFIG_SYS_DCACHE_LINESZ;
 
 	/* You asked for it, you got it */
 	begin = (unsigned long)start & ~(linesz - 1);
@@ -74,7 +74,7 @@ void icache_invalidate_range(volatile void *start, size_t size)
 {
 	unsigned long v, begin, end, linesz;
 
-	linesz = CFG_ICACHE_LINESZ;
+	linesz = CONFIG_SYS_ICACHE_LINESZ;
 
 	/* You asked for it, you got it */
 	begin = (unsigned long)start & ~(linesz - 1);
diff --git a/cpu/at32ap/cpu.c b/cpu/at32ap/cpu.c
index 0ba836180..904bfb227 100644
--- a/cpu/at32ap/cpu.c
+++ b/cpu/at32ap/cpu.c
@@ -32,12 +32,12 @@
 #include "hsmc3.h"
 
 /* Sanity checks */
-#if (CFG_CLKDIV_CPU > CFG_CLKDIV_HSB)		\
-	|| (CFG_CLKDIV_HSB > CFG_CLKDIV_PBA)	\
-	|| (CFG_CLKDIV_HSB > CFG_CLKDIV_PBB)
+#if (CONFIG_SYS_CLKDIV_CPU > CONFIG_SYS_CLKDIV_HSB)		\
+	|| (CONFIG_SYS_CLKDIV_HSB > CONFIG_SYS_CLKDIV_PBA)	\
+	|| (CONFIG_SYS_CLKDIV_HSB > CONFIG_SYS_CLKDIV_PBB)
 # error Constraint fCPU >= fHSB >= fPB{A,B} violated
 #endif
-#if defined(CONFIG_PLL) && ((CFG_PLL0_MUL < 1) || (CFG_PLL0_DIV < 1))
+#if defined(CONFIG_PLL) && ((CONFIG_SYS_PLL0_MUL < 1) || (CONFIG_SYS_PLL0_DIV < 1))
 # error Invalid PLL multiplier and/or divider
 #endif
 
@@ -47,7 +47,7 @@ int cpu_init(void)
 {
 	extern void _evba(void);
 
-	gd->cpu_hz = CFG_OSC0_HZ;
+	gd->cpu_hz = CONFIG_SYS_OSC0_HZ;
 
 	/* TODO: Move somewhere else, but needs to be run before we
 	 * increase the clock frequency. */
diff --git a/cpu/at32ap/hsdramc.c b/cpu/at32ap/hsdramc.c
index 992612b46..f74121cd4 100644
--- a/cpu/at32ap/hsdramc.c
+++ b/cpu/at32ap/hsdramc.c
@@ -21,7 +21,7 @@
  */
 #include <common.h>
 
-#ifdef CFG_HSDRAMC
+#ifdef CONFIG_SYS_HSDRAMC
 #include <asm/io.h>
 #include <asm/sdram.h>
 
@@ -117,4 +117,4 @@ unsigned long sdram_init(void *sdram_base, const struct sdram_config *config)
 	return sdram_size;
 }
 
-#endif /* CFG_HSDRAMC */
+#endif /* CONFIG_SYS_HSDRAMC */
diff --git a/cpu/at32ap/interrupts.c b/cpu/at32ap/interrupts.c
index 160838eee..75cc39e94 100644
--- a/cpu/at32ap/interrupts.c
+++ b/cpu/at32ap/interrupts.c
@@ -82,7 +82,7 @@ void set_timer(unsigned long t)
 	unsigned long long ticks = t;
 	unsigned long lo, hi, hi_new;
 
-	ticks = (ticks * get_tbclk()) / CFG_HZ;
+	ticks = (ticks * get_tbclk()) / CONFIG_SYS_HZ;
 	hi = ticks >> 32;
 	lo = ticks & 0xffffffffUL;
 
@@ -137,7 +137,7 @@ void timer_init(void)
 
 	sysreg_write(COUNT, 0);
 
-	tmp = (u64)CFG_HZ << 32;
+	tmp = (u64)CONFIG_SYS_HZ << 32;
 	tmp += gd->cpu_hz / 2;
 	do_div(tmp, gd->cpu_hz);
 	tb_factor = (u32)tmp;
diff --git a/cpu/at32ap/start.S b/cpu/at32ap/start.S
index 907e9b153..d37a46eb1 100644
--- a/cpu/at32ap/start.S
+++ b/cpu/at32ap/start.S
@@ -188,7 +188,7 @@ at32ap_low_level_init:
 	.align	2
 	.type	sp_init,@object
 sp_init:
-	.long	CFG_INIT_SP_ADDR
+	.long	CONFIG_SYS_INIT_SP_ADDR
 got_init:
 	.long	3b - _GLOBAL_OFFSET_TABLE_
 
diff --git a/cpu/blackfin/Makefile b/cpu/blackfin/Makefile
index f194a3835..8fed4b422 100644
--- a/cpu/blackfin/Makefile
+++ b/cpu/blackfin/Makefile
@@ -16,7 +16,7 @@ LIB	= $(obj)lib$(CPU).a
 EXTRA    :=
 CEXTRA   := initcode.o
 SEXTRA   := start.o
-SOBJS    := interrupt.o cache.o flush.o
+SOBJS    := interrupt.o cache.o
 COBJS    := cpu.o traps.o interrupts.o reset.o serial.o i2c.o watchdog.o
 
 ifeq ($(CONFIG_BFIN_BOOT_MODE),BFIN_BOOT_BYPASS)
diff --git a/cpu/blackfin/cpu.c b/cpu/blackfin/cpu.c
index 53de5aba6..9efd88e7e 100644
--- a/cpu/blackfin/cpu.c
+++ b/cpu/blackfin/cpu.c
@@ -14,46 +14,11 @@
 #include <asm/blackfin.h>
 #include <asm/cplb.h>
 #include <asm/mach-common/bits/core.h>
-#include <asm/mach-common/bits/mpu.h>
 #include <asm/mach-common/bits/trace.h>
 
 #include "cpu.h"
 #include "serial.h"
 
-void icache_enable(void)
-{
-	bfin_write_IMEM_CONTROL(bfin_read_IMEM_CONTROL() | (IMC | ENICPLB));
-	SSYNC();
-}
-
-void icache_disable(void)
-{
-	bfin_write_IMEM_CONTROL(bfin_read_IMEM_CONTROL() & ~(IMC | ENICPLB));
-	SSYNC();
-}
-
-int icache_status(void)
-{
-	return bfin_read_IMEM_CONTROL() & ENICPLB;
-}
-
-void dcache_enable(void)
-{
-	bfin_write_DMEM_CONTROL(bfin_read_DMEM_CONTROL() | (ACACHE_BCACHE | ENDCPLB | PORT_PREF0));
-	SSYNC();
-}
-
-void dcache_disable(void)
-{
-	bfin_write_DMEM_CONTROL(bfin_read_DMEM_CONTROL() & ~(ACACHE_BCACHE | ENDCPLB | PORT_PREF0));
-	SSYNC();
-}
-
-int dcache_status(void)
-{
-	return bfin_read_DMEM_CONTROL() & ENDCPLB;
-}
-
 __attribute__ ((__noreturn__))
 void cpu_init_f(ulong bootflag, ulong loaded_from_ldr)
 {
@@ -133,9 +98,8 @@ int irq_init(void)
 	bfin_write_EVT15(evt_default);
 	bfin_write_ILAT(0);
 	CSYNC();
-	/* enable all interrupts except for core timer */
-	irq_flags = 0xffffffbf;
+	/* enable hardware error irq */
+	irq_flags = 0x3f;
 	local_irq_enable();
-	CSYNC();
 	return 0;
 }
diff --git a/cpu/blackfin/flush.S b/cpu/blackfin/flush.S
deleted file mode 100644
index 417f798f8..000000000
--- a/cpu/blackfin/flush.S
+++ /dev/null
@@ -1,230 +0,0 @@
-/* flush.S - low level cache flushing routines
- * Copyright (C) 2003-2007 Analog Devices Inc.
- * Licensed under the GPL-2 or later.
- */
-
-#include <config.h>
-#include <asm/blackfin.h>
-#include <asm/cplb.h>
-#include <asm/mach-common/bits/mpu.h>
-
-.text
-
-/* This is an external function being called by the user
- * application through __flush_cache_all. Currently this function
- * serves the purpose of flushing all the pending writes in
- * in the data cache.
- */
-
-ENTRY(_flush_data_cache)
-	[--SP] = ( R7:6, P5:4 );
-	LINK 12;
-	SP += -12;
-	P5.H = HI(DCPLB_ADDR0);
-	P5.L = LO(DCPLB_ADDR0);
-	P4.H = HI(DCPLB_DATA0);
-	P4.L = LO(DCPLB_DATA0);
-	R7 = CPLB_VALID | CPLB_L1_CHBL | CPLB_DIRTY (Z);
-	R6 = 16;
-.Lnext:	R0 = [P5++];
-	R1 = [P4++];
-	CC = BITTST(R1, 14);	/* Is it write-through?*/
-	IF CC JUMP .Lskip;	/* If so, ignore it.*/
-	R2 = R1 & R7;		/* Is it a dirty, cached page?*/
-	CC = R2;
-	IF !CC JUMP .Lskip;	/* If not, ignore it.*/
-	[--SP] = RETS;
-	CALL _dcplb_flush;	/* R0 = page, R1 = data*/
-	RETS = [SP++];
-.Lskip:	R6 += -1;
-	CC = R6;
-	IF CC JUMP .Lnext;
-	SSYNC;
-	SP += 12;
-	UNLINK;
-	( R7:6, P5:4 ) = [SP++];
-	RTS;
-ENDPROC(_flush_data_cache)
-
-/* This is an internal function to flush all pending
- * writes in the cache associated with a particular DCPLB.
- *
- * R0 -  page's start address
- * R1 -  CPLB's data field.
- */
-
-.align 2
-ENTRY(_dcplb_flush)
-	[--SP] = ( R7:0, P5:0 );
-	[--SP] = LC0;
-	[--SP] = LT0;
-	[--SP] = LB0;
-	[--SP] = LC1;
-	[--SP] = LT1;
-	[--SP] = LB1;
-
-	/* If it's a 1K or 4K page, then it's quickest to
-	 * just systematically flush all the addresses in
-	 * the page, regardless of whether they're in the
-	 * cache, or dirty. If it's a 1M or 4M page, there
-	 * are too many addresses, and we have to search the
-	 * cache for lines corresponding to the page.
-	 */
-
-	CC = BITTST(R1, 17);	/* 1MB or 4MB */
-	IF !CC JUMP .Ldflush_whole_page;
-
-	/* We're only interested in the page's size, so extract
-	 * this from the CPLB (bits 17:16), and scale to give an
-	 * offset into the page_size and page_prefix tables.
-	 */
-
-	R1 <<= 14;
-	R1 >>= 30;
-	R1 <<= 2;
-
-	/* The page could be mapped into Bank A or Bank B, depending
-	 * on (a) whether both banks are configured as cache, and
-	 * (b) on whether address bit A[x] is set. x is determined
-	 * by DCBS in DMEM_CONTROL
-	 */
-
-	R2 = 0;			/* Default to Bank A (Bank B would be 1)*/
-
-	P0.L = LO(DMEM_CONTROL);
-	P0.H = HI(DMEM_CONTROL);
-
-	R3 = [P0];		/* If Bank B is not enabled as cache*/
-	CC = BITTST(R3, 2);	/* then Bank A is our only option.*/
-	IF CC JUMP .Lbank_chosen;
-
-	R4 = 1<<14;		/* If DCBS==0, use A[14].*/
-	R5 = R4 << 7;		/* If DCBS==1, use A[23];*/
-	CC = BITTST(R3, 4);
-	IF CC R4 = R5;		/* R4 now has either bit 14 or bit 23 set.*/
-	R5 = R0 & R4;		/* Use it to test the Page address*/
-	CC = R5;		/* and if that bit is set, we use Bank B,*/
-	R2 = CC;		/* else we use Bank A.*/
-	R2 <<= 23;		/* The Bank selection's at posn 23.*/
-
-.Lbank_chosen:
-
-	/* We can also determine the sub-bank used, because this is
-	 * taken from bits 13:12 of the address.
-	 */
-
-	R3 = ((12<<8)|2);		/* Extraction pattern */
-	nop;				/*Anamoly 05000209*/
-	R4 = EXTRACT(R0, R3.L) (Z);	/* Extract bits*/
-	/* Save in extraction pattern for later deposit.*/
-	R3.H = R4.L << 0;
-
-	/* So:
-	 * R0 = Page start
-	 * R1 = Page length (actually, offset into size/prefix tables)
-	 * R2 = Bank select mask
-	 * R3 = sub-bank deposit values
-	 *
-	 * The cache has 2 Ways, and 64 sets, so we iterate through
-	 * the sets, accessing the tag for each Way, for our Bank and
-	 * sub-bank, looking for dirty, valid tags that match our
-	 * address prefix.
-	 */
-
-	P5.L = LO(DTEST_COMMAND);
-	P5.H = HI(DTEST_COMMAND);
-	P4.L = LO(DTEST_DATA0);
-	P4.H = HI(DTEST_DATA0);
-
-	P0.L = page_prefix_table;
-	P0.H = page_prefix_table;
-	P1 = R1;
-	R5 = 0;			/* Set counter*/
-	P0 = P1 + P0;
-	R4 = [P0];		/* This is the address prefix*/
-
-
-	/* We're reading (bit 1==0) the tag (bit 2==0), and we
-	 * don't care about which double-word, since we're only
-	 * fetching tags, so we only have to set Set, Bank,
-	 * Sub-bank and Way.
-	 */
-
-	P2 = 2;
-	LSETUP (.Lfs1, .Lfe1) LC1 = P2;
-.Lfs1:	P0 = 64;		/* iterate over all sets*/
-	LSETUP (.Lfs0, .Lfe0) LC0 = P0;
-.Lfs0:	R6 = R5 << 5;		/* Combine set*/
-	R6.H = R3.H << 0 ;	/* and sub-bank*/
-	R6 = R6 | R2;		/* and Bank. Leave Way==0 at first.*/
-	BITSET(R6,14);
-	[P5] = R6;		/* Issue Command*/
-	SSYNC;
-	R7 = [P4];		/* and read Tag.*/
-	CC = BITTST(R7, 0);	/* Check if valid*/
-	IF !CC JUMP .Lfskip;	/* and skip if not.*/
-	CC = BITTST(R7, 1);	/* Check if dirty*/
-	IF !CC JUMP .Lfskip;	/* and skip if not.*/
-
-	/* Compare against the page address. First, plant bits 13:12
-	 * into the tag, since those aren't part of the returned data.
-	 */
-
-	R7 = DEPOSIT(R7, R3);	/* set 13:12*/
-	R1 = R7 & R4;		/* Mask off lower bits*/
-	CC = R1 == R0;		/* Compare against page start.*/
-	IF !CC JUMP .Lfskip;	/* Skip it if it doesn't match.*/
-
-	/* Tag address matches against page, so this is an entry
-	 * we must flush.
-	 */
-
-	R7 >>= 10;		/* Mask off the non-address bits*/
-	R7 <<= 10;
-	P3 = R7;
-	SSYNC;
-	FLUSHINV [P3];		/* And flush the entry*/
-.Lfskip:
-.Lfe0:	R5 += 1;		/* Advance to next Set*/
-.Lfe1:	BITSET(R2, 26);		/* Go to next Way.*/
-
-.Ldfinished:
-	SSYNC;			/* Ensure the data gets out to mem.*/
-
-	/*Finished. Restore context.*/
-	LB1 = [SP++];
-	LT1 = [SP++];
-	LC1 = [SP++];
-	LB0 = [SP++];
-	LT0 = [SP++];
-	LC0 = [SP++];
-	( R7:0, P5:0 ) = [SP++];
-	RTS;
-
-.Ldflush_whole_page:
-
-	/* It's a 1K or 4K page, so quicker to just flush the
-	 * entire page.
-	 */
-
-	P1 = 32;		/* For 1K pages*/
-	P2 = P1 << 2;		/* For 4K pages*/
-	P0 = R0;		/* Start of page*/
-	CC = BITTST(R1, 16);	/* Whether 1K or 4K*/
-	IF CC P1 = P2;
-	P1 += -1;		/* Unroll one iteration*/
-	SSYNC;
-	FLUSHINV [P0++];	/* because CSYNC can't end loops.*/
-	LSETUP (.Leall, .Leall) LC0 = P1;
-.Leall:	FLUSHINV [P0++];
-	SSYNC;
-	JUMP .Ldfinished;
-ENDPROC(_dcplb_flush)
-
-.align 4;
-page_prefix_table:
-.byte4	0xFFFFFC00;	/* 1K */
-.byte4	0xFFFFF000;	/* 4K */
-.byte4	0xFFF00000;	/* 1M */
-.byte4	0xFFC00000;	/* 4M */
-.page_prefix_table.end:
diff --git a/cpu/blackfin/i2c.c b/cpu/blackfin/i2c.c
index 60f03d47a..2a3e2238c 100644
--- a/cpu/blackfin/i2c.c
+++ b/cpu/blackfin/i2c.c
@@ -425,20 +425,4 @@ int i2c_write(uchar chip, uint addr, int alen, uchar * buffer, int len)
 
 }
 
-uchar i2c_reg_read(uchar chip, uchar reg)
-{
-	uchar buf;
-
-	PRINTD("i2c_reg_read: chip=0x%02x, reg=0x%02x\n", chip, reg);
-	i2c_read(chip, reg, 0, &buf, 1);
-	return (buf);
-}
-
-void i2c_reg_write(uchar chip, uchar reg, uchar val)
-{
-	PRINTD("i2c_reg_write: chip=0x%02x, reg=0x%02x, val=0x%02x\n", chip,
-			reg, val);
-	i2c_write(chip, reg, 0, &val, 1);
-}
-
 #endif /* CONFIG_HARD_I2C */
diff --git a/cpu/blackfin/interrupts.c b/cpu/blackfin/interrupts.c
index 80c550545..d4dd63610 100644
--- a/cpu/blackfin/interrupts.c
+++ b/cpu/blackfin/interrupts.c
@@ -48,7 +48,7 @@ ulong get_tbclk(void)
 {
 	ulong tbclk;
 
-	tbclk = CFG_HZ;
+	tbclk = CONFIG_SYS_HZ;
 	return tbclk;
 }
 
diff --git a/cpu/blackfin/serial.c b/cpu/blackfin/serial.c
index 406d9d023..0d6f377c0 100644
--- a/cpu/blackfin/serial.c
+++ b/cpu/blackfin/serial.c
@@ -35,6 +35,32 @@
 
 #include "serial.h"
 
+#ifdef CONFIG_DEBUG_SERIAL
+uint16_t cached_lsr[256];
+uint16_t cached_rbr[256];
+size_t cache_count;
+
+/* The LSR is read-to-clear on some parts, so we have to make sure status
+ * bits aren't inadvertently lost when doing various tests.
+ */
+static uint16_t uart_lsr_save;
+static uint16_t uart_lsr_read(void)
+{
+	uint16_t lsr = *pUART_LSR;
+	uart_lsr_save |= (lsr & (OE|PE|FE|BI));
+	return lsr | uart_lsr_save;
+}
+/* Just do the clear for everyone since it can't hurt. */
+static void uart_lsr_clear(void)
+{
+	uart_lsr_save = 0;
+	*pUART_LSR |= -1;
+}
+#else
+static inline uint16_t uart_lsr_read(void) { return *pUART_LSR; }
+static inline void uart_lsr_clear(void) { *pUART_LSR = -1; }
+#endif
+
 /* Symbol for our assembly to call. */
 void serial_set_baud(uint32_t baud)
 {
@@ -61,6 +87,12 @@ int serial_init(void)
 {
 	serial_initialize();
 	serial_setbrg();
+	uart_lsr_clear();
+#ifdef CONFIG_DEBUG_SERIAL
+	cache_count = 0;
+	memset(cached_lsr, 0x00, sizeof(cached_lsr));
+	memset(cached_rbr, 0x00, sizeof(cached_rbr));
+#endif
 	return 0;
 }
 
@@ -73,7 +105,7 @@ void serial_putc(const char c)
 	WATCHDOG_RESET();
 
 	/* wait for the hardware fifo to clear up */
-	while (!(*pUART_LSR & THRE))
+	while (!(uart_lsr_read() & THRE))
 		continue;
 
 	/* queue the character for transmission */
@@ -83,38 +115,54 @@ void serial_putc(const char c)
 	WATCHDOG_RESET();
 
 	/* wait for the byte to be shifted over the line */
-	while (!(*pUART_LSR & TEMT))
+	while (!(uart_lsr_read() & TEMT))
 		continue;
 }
 
 int serial_tstc(void)
 {
 	WATCHDOG_RESET();
-	return (*pUART_LSR & DR) ? 1 : 0;
+	return (uart_lsr_read() & DR) ? 1 : 0;
 }
 
 int serial_getc(void)
 {
-	uint16_t uart_lsr_val, uart_rbr_val;
+	uint16_t uart_rbr_val;
 
 	/* wait for data ! */
 	while (!serial_tstc())
 		continue;
 
-	/* clear the status and grab the new byte */
-	uart_lsr_val = *pUART_LSR;
+	/* grab the new byte */
 	uart_rbr_val = *pUART_RBR;
 
+#ifdef CONFIG_DEBUG_SERIAL
+	/* grab & clear the LSR */
+	uint16_t uart_lsr_val = uart_lsr_read();
+
+	cached_lsr[cache_count] = uart_lsr_val;
+	cached_rbr[cache_count] = uart_rbr_val;
+	cache_count = (cache_count + 1) % ARRAY_SIZE(cached_lsr);
+
 	if (uart_lsr_val & (OE|PE|FE|BI)) {
-		/* Some parts are read-to-clear while others are
-		 * write-to-clear.  Just do the write for everyone
-		 * since it cant hurt (other than code size).
-		 */
-		*pUART_LSR = (OE|PE|FE|BI);
+		uint16_t dll, dlh;
+		printf("\n[SERIAL ERROR]\n");
+		ACCESS_LATCH();
+		dll = *pUART_DLL;
+		dlh = *pUART_DLH;
+		ACCESS_PORT_IER();
+		printf("\tDLL=0x%x DLH=0x%x\n", dll, dlh);
+		do {
+			--cache_count;
+			printf("\t%3i: RBR=0x%02x LSR=0x%02x\n", cache_count,
+				cached_rbr[cache_count], cached_lsr[cache_count]);
+		} while (cache_count > 0);
 		return -1;
 	}
+#endif
+	uart_lsr_clear();
 
-	return uart_rbr_val & 0xFF;
+	return uart_rbr_val;
 }
 
 void serial_puts(const char *s)
diff --git a/cpu/blackfin/serial.h b/cpu/blackfin/serial.h
index 1f0f4b46c..ec40c266a 100644
--- a/cpu/blackfin/serial.h
+++ b/cpu/blackfin/serial.h
@@ -175,11 +175,11 @@ static inline uint32_t serial_early_get_baud(void)
 __attribute__((always_inline))
 static inline void serial_early_set_baud(uint32_t baud)
 {
-	/* Translate from baud into divisor in terms of SCLK.
-	 * The +1 is to make sure we over sample just a little
-	 * rather than under sample the incoming signals.
+	/* Translate from baud into divisor in terms of SCLK.  The
+	 * weird multiplication is to make sure we over sample just
+	 * a little rather than under sample the incoming signals.
 	 */
-	uint16_t divisor = (get_sclk() / (baud * 16)) + 1;
+	uint16_t divisor = (get_sclk() + (baud * 8)) / (baud * 16) - ANOMALY_05000230;
 
 	/* Set DLAB in LCR to Access DLL and DLH */
 	ACCESS_LATCH();
diff --git a/cpu/blackfin/start.S b/cpu/blackfin/start.S
index 30212e928..9975a0c62 100644
--- a/cpu/blackfin/start.S
+++ b/cpu/blackfin/start.S
@@ -1,7 +1,7 @@
 /*
  * U-boot - start.S Startup file for Blackfin u-boot
  *
- * Copyright (c) 2005-2007 Analog Devices Inc.
+ * Copyright (c) 2005-2008 Analog Devices Inc.
  *
  * This file is based on head.S
  * Copyright (c) 2003  Metrowerks/Motorola
@@ -49,8 +49,8 @@
 ENTRY(_start)
 
 	/* Set our initial stack to L1 scratch space */
-	sp.l = LO(L1_SRAM_SCRATCH + L1_SRAM_SCRATCH_SIZE);
-	sp.h = HI(L1_SRAM_SCRATCH + L1_SRAM_SCRATCH_SIZE);
+	sp.l = LO(L1_SRAM_SCRATCH_END - 20);
+	sp.h = HI(L1_SRAM_SCRATCH_END - 20);
 
 #ifdef CONFIG_HW_WATCHDOG
 # ifndef CONFIG_HW_WATCHDOG_TIMEOUT_START
@@ -75,7 +75,7 @@ ENTRY(_start)
 
 	serial_early_puts("Init Registers");
 
-	/* Disable nested interrupts and enable CYCLES for udelay() */
+	/* Disable self-nested interrupts and enable CYCLES for udelay() */
 	R0 = CCEN | 0x30;
 	SYSCFG = R0;
 
@@ -145,12 +145,12 @@ ENTRY(_start)
 	r6 = 0 (x);
 	p1 = r0;
 
-	p2.l = LO(CFG_MONITOR_BASE);
-	p2.h = HI(CFG_MONITOR_BASE);
+	p2.l = LO(CONFIG_SYS_MONITOR_BASE);
+	p2.h = HI(CONFIG_SYS_MONITOR_BASE);
 
 	p3 = 0x04;
-	p4.l = LO(CFG_MONITOR_BASE + CFG_MONITOR_LEN);
-	p4.h = HI(CFG_MONITOR_BASE + CFG_MONITOR_LEN);
+	p4.l = LO(CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN);
+	p4.h = HI(CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN);
 .Lloop1:
 	r1 = [p1 ++ p3];
 	[p2 ++ p3] = r1;
@@ -180,7 +180,7 @@ ENTRY(_start)
 
 	/* Now lower ourselves from the highest interrupt level to
 	 * the lowest.  We do this by masking all interrupts but 15,
-	 * setting the 15 handler to "board_init_f", raising the 15
+	 * setting the 15 handler to ".Lenable_nested", raising the 15
 	 * interrupt, and then returning from the highest interrupt
 	 * level to the dummy "jump" until the interrupt controller
 	 * services the pending 15 interrupt.
@@ -190,20 +190,23 @@ ENTRY(_start)
 	r1 = r6;
 	p0.l = LO(EVT15);
 	p0.h = HI(EVT15);
-	p1.l = _cpu_init_f;
-	p1.h = _cpu_init_f;
+	p1.l = .Lenable_nested;
+	p1.h = .Lenable_nested;
 	[p0] = p1;
-	p2.l = LO(IMASK);
-	p2.h = HI(IMASK);
-	p3.l = LO(EVT_IVG15);
-	p3.h = HI(EVT_IVG15);
-	[p2] = p3;
+	r7 = EVT_IVG15 (z);
+	sti r7;
 	raise 15;
 	p4.l = .LWAIT_HERE;
 	p4.h = .LWAIT_HERE;
 	reti = p4;
 	rti;
 
+	/* Enable nested interrupts before continuing with cpu init */
+.Lenable_nested:
+	cli r7;
+	[--sp] = reti;
+	jump.l _cpu_init_f;
+
 .LWAIT_HERE:
 	jump .LWAIT_HERE;
 ENDPROC(_start)
diff --git a/cpu/blackfin/traps.c b/cpu/blackfin/traps.c
index 4474fe51d..d17c0a195 100644
--- a/cpu/blackfin/traps.c
+++ b/cpu/blackfin/traps.c
@@ -229,26 +229,67 @@ static void decode_address(char *buf, unsigned long address)
 
 	if (!address)
 		sprintf(buf, "<0x%p> /* Maybe null pointer? */", address);
-	else if (address >= CFG_MONITOR_BASE &&
-	         address < CFG_MONITOR_BASE + CFG_MONITOR_LEN)
+	else if (address >= CONFIG_SYS_MONITOR_BASE &&
+	         address < CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)
 		sprintf(buf, "<0x%p> /* somewhere in u-boot */", address);
 	else
 		sprintf(buf, "<0x%p> /* unknown address */", address);
 }
 
+static char *strhwerrcause(uint16_t hwerrcause)
+{
+	switch (hwerrcause) {
+		case 0x02: return "system mmr error";
+		case 0x03: return "external memory addressing error";
+		case 0x12: return "performance monitor overflow";
+		case 0x18: return "raise 5 instruction";
+		default:   return "undef";
+	}
+}
+
+static char *strexcause(uint16_t excause)
+{
+	switch (excause) {
+		case 0x00 ... 0xf: return "custom exception";
+		case 0x10: return "single step";
+		case 0x11: return "trace buffer full";
+		case 0x21: return "undef inst";
+		case 0x22: return "illegal inst";
+		case 0x23: return "dcplb prot violation";
+		case 0x24: return "misaligned data";
+		case 0x25: return "unrecoverable event";
+		case 0x26: return "dcplb miss";
+		case 0x27: return "multiple dcplb hit";
+		case 0x28: return "emulation watchpoint";
+		case 0x2a: return "misaligned inst";
+		case 0x2b: return "icplb prot violation";
+		case 0x2c: return "icplb miss";
+		case 0x2d: return "multiple icplb hit";
+		case 0x2e: return "illegal use of supervisor resource";
+		default:   return "undef";
+	}
+}
+
 void dump(struct pt_regs *fp)
 {
 	char buf[150];
 	size_t i;
+	uint16_t hwerrcause, excause;
 
 	if (!ENABLE_DUMP)
 		return;
 
+	/* fp->ipend is garbage, so load it ourself */
+	fp->ipend = bfin_read_IPEND();
+
+	hwerrcause = (fp->seqstat & HWERRCAUSE) >> HWERRCAUSE_P;
+	excause = (fp->seqstat & EXCAUSE) >> EXCAUSE_P;
+
 	printf("SEQUENCER STATUS:\n");
 	printf(" SEQSTAT: %08lx  IPEND: %04lx  SYSCFG: %04lx\n",
 		fp->seqstat, fp->ipend, fp->syscfg);
-	printf("  HWERRCAUSE: 0x%lx\n", (fp->seqstat & HWERRCAUSE) >> HWERRCAUSE_P);
-	printf("  EXCAUSE   : 0x%lx\n", (fp->seqstat & EXCAUSE) >> EXCAUSE_P);
+	printf("  HWERRCAUSE: 0x%lx: %s\n", hwerrcause, strhwerrcause(hwerrcause));
+	printf("  EXCAUSE   : 0x%lx: %s\n", excause, strexcause(excause));
 	for (i = 6; i <= 15; ++i) {
 		if (fp->ipend & (1 << i)) {
 			decode_address(buf, bfin_read32(EVT0 + 4*i));
@@ -263,8 +304,9 @@ void dump(struct pt_regs *fp)
 	printf(" RETX: %s\n", buf);
 	decode_address(buf, fp->rets);
 	printf(" RETS: %s\n", buf);
+	/* we lie and store RETI in "pc" */
 	decode_address(buf, fp->pc);
-	printf(" PC  : %s\n", buf);
+	printf(" RETI: %s\n", buf);
 
 	if (fp->seqstat & EXCAUSE) {
 		decode_address(buf, bfin_read_DCPLB_FAULT_ADDR());
@@ -344,10 +386,6 @@ void bfin_panic(struct pt_regs *regs)
 	);
 	dump(regs);
 	dump_bfin_trace_buffer();
-	printf(
-		"\n"
-		"Please reset the board\n"
-		"\n"
-	);
+	puts("\n");
 	bfin_reset_or_hang();
 }
diff --git a/cpu/i386/interrupts.c b/cpu/i386/interrupts.c
index f34011990..f6dbccac5 100644
--- a/cpu/i386/interrupts.c
+++ b/cpu/i386/interrupts.c
@@ -509,7 +509,7 @@ int disable_interrupts(void)
 }
 
 
-#ifdef CFG_RESET_GENERIC
+#ifdef CONFIG_SYS_RESET_GENERIC
 
 void __attribute__ ((regparm(0))) generate_gpf(void);
 asm(".globl generate_gpf\n"
diff --git a/cpu/i386/sc520.c b/cpu/i386/sc520.c
index 640b25584..cb6bc03bc 100644
--- a/cpu/i386/sc520.c
+++ b/cpu/i386/sc520.c
@@ -32,7 +32,7 @@
 #include <config.h>
 #include <pci.h>
 #ifdef CONFIG_SC520_SSI
-#include <ssi.h>
+#include <asm/ic/ssi.h>
 #endif
 #include <asm/io.h>
 #include <asm/pci.h>
@@ -113,7 +113,7 @@ void init_sc520(void)
 	write_mmcr_word(SC520_HBCTL,0x04);      /* enable posted-writes */
 
 
-	if (CFG_SC520_HIGH_SPEED) {
+	if (CONFIG_SYS_SC520_HIGH_SPEED) {
 		write_mmcr_byte(SC520_CPUCTL, 0x2);	/* set it to 133 MHz and write back */
 		gd->cpu_clk = 133000000;
 		printf("## CPU Speed set to 133MHz\n");
@@ -145,7 +145,7 @@ unsigned long init_sc520_dram(void)
 
 	u32 dram_present=0;
 	u32 dram_ctrl;
-#ifdef CFG_SDRAM_DRCTMCTL
+#ifdef CONFIG_SYS_SDRAM_DRCTMCTL
 	/* these memory control registers are set up in the assember part,
 	 * in sc520_asm.S, during 'mem_init'.  If we muck with them here,
 	 * after we are running a stack in RAM, we have troubles.  Besides,
@@ -156,9 +156,9 @@ unsigned long init_sc520_dram(void)
 #else
 	int val;
 
-	int cas_precharge_delay = CFG_SDRAM_PRECHARGE_DELAY;
-	int refresh_rate        = CFG_SDRAM_REFRESH_RATE;
-	int ras_cas_delay       = CFG_SDRAM_RAS_CAS_DELAY;
+	int cas_precharge_delay = CONFIG_SYS_SDRAM_PRECHARGE_DELAY;
+	int refresh_rate        = CONFIG_SYS_SDRAM_REFRESH_RATE;
+	int ras_cas_delay       = CONFIG_SYS_SDRAM_RAS_CAS_DELAY;
 
 	/* set SDRAM speed here */
 
@@ -393,7 +393,7 @@ void pci_sc520_init(struct pci_controller *hose)
 
 #endif
 
-#ifdef CFG_TIMER_SC520
+#ifdef CONFIG_SYS_TIMER_SC520
 
 
 void reset_timer(void)
diff --git a/cpu/i386/sc520_asm.S b/cpu/i386/sc520_asm.S
index 34322ea25..59ed2b8d6 100644
--- a/cpu/i386/sc520_asm.S
+++ b/cpu/i386/sc520_asm.S
@@ -460,21 +460,21 @@ emptybank:
 	incl    %edi
 	loop    cleanuplp
 
-#if defined CFG_SDRAM_DRCTMCTL
+#if defined CONFIG_SYS_SDRAM_DRCTMCTL
 	/* just have your hardware desinger _GIVE_ you what you need here! */
 	movl    $DRCTMCTL, %edi
-	movb    $CFG_SDRAM_DRCTMCTL,%al
+	movb    $CONFIG_SYS_SDRAM_DRCTMCTL,%al
 	movb    (%edi), %al
 #else
-#if defined(CFG_SDRAM_CAS_LATENCY_2T) || defined(CFG_SDRAM_CAS_LATENCY_3T)
+#if defined(CONFIG_SYS_SDRAM_CAS_LATENCY_2T) || defined(CONFIG_SYS_SDRAM_CAS_LATENCY_3T)
 	/* set the CAS latency now since it is hard to do
 	 * when we run from the RAM */
 	movl    $DRCTMCTL, %edi          /* DRAM timing register */
 	movb    (%edi), %al
-#ifdef CFG_SDRAM_CAS_LATENCY_2T
+#ifdef CONFIG_SYS_SDRAM_CAS_LATENCY_2T
 	andb    $0xef, %al
 #endif
-#ifdef CFG_SDRAM_CAS_LATENCY_3T
+#ifdef CONFIG_SYS_SDRAM_CAS_LATENCY_3T
 	orb     $0x10, %al
 #endif
 	movb    %al, (%edi)
@@ -540,7 +540,7 @@ bank0:	movl	(%edi), %eax
 done:
 	movl	%ebx, %eax
 
-#if CFG_SDRAM_ECC_ENABLE
+#if CONFIG_SYS_SDRAM_ECC_ENABLE
 	/* A nominal memory test: just a byte at each address line */
 	movl    %eax, %ecx
 	shrl    $0x1, %ecx
diff --git a/cpu/i386/start.S b/cpu/i386/start.S
index 264ac0940..b6175b1c1 100644
--- a/cpu/i386/start.S
+++ b/cpu/i386/start.S
@@ -55,7 +55,7 @@ early_board_init_ret:
 	/* so we try to indicate progress */
 	movw	$0x01, %ax
 	movl	$.progress0, %ebp
-	jmp	show_boot_progress
+	jmp	show_boot_progress_asm
 .progress0:
 
 	/* size memory */
@@ -67,14 +67,14 @@ mem_init_ret:
 	 * (we need atleast bss start+bss size+stack size) */
 	movl	$_i386boot_bss_start, %ecx        /* BSS start */
 	addl	$_i386boot_bss_size, %ecx         /* BSS size */
-	addl	$CFG_STACK_SIZE, %ecx
+	addl	$CONFIG_SYS_STACK_SIZE, %ecx
 	cmpl	%ecx, %eax
 	jae	mem_ok
 
 	/* indicate (lack of) progress */
 	movw	$0x81, %ax
 	movl	$.progress0a, %ebp
-	jmp	show_boot_progress
+	jmp	show_boot_progress_asm
 .progress0a:
 	jmp	die
 mem_ok:
@@ -82,13 +82,13 @@ mem_ok:
 	/* indicate progress */
 	movw	$0x02, %ax
 	movl	$.progress1, %ebp
-	jmp	show_boot_progress
+	jmp	show_boot_progress_asm
 .progress1:
 
 	/* create a stack after the bss */
 	movl    $_i386boot_bss_start, %eax
 	addl	$_i386boot_bss_size, %eax
-	addl	$CFG_STACK_SIZE, %eax
+	addl	$CONFIG_SYS_STACK_SIZE, %eax
 	movl    %eax, %esp
 
 	pushl	$0
@@ -104,7 +104,7 @@ no_stack:
 	/* indicate (lack of) progress */
 	movw	$0x82, %ax
 	movl	$.progress1a, %ebp
-	jmp	show_boot_progress
+	jmp	show_boot_progress_asm
 .progress1a:
 	jmp die
 
@@ -113,7 +113,7 @@ stack_ok:
 	/* indicate progress */
 	movw	$0x03, %ax
 	movl	$.progress2, %ebp
-	jmp	show_boot_progress
+	jmp	show_boot_progress_asm
 .progress2:
 
 	/* copy data section to ram, size must be 4-byte aligned */
@@ -136,7 +136,7 @@ data_fail:
 	/* indicate (lack of) progress */
 	movw	$0x83, %ax
 	movl	$.progress2a, %ebp
-	jmp	show_boot_progress
+	jmp	show_boot_progress_asm
 .progress2a:
 	jmp	die
 
@@ -145,7 +145,7 @@ data_ok:
 	/* indicate progress */
 	movw	$0x04, %ax
 	movl	$.progress3, %ebp
-	jmp	show_boot_progress
+	jmp	show_boot_progress_asm
 .progress3:
 
 	/* clear bss section in ram, size must be 4-byte aligned  */
@@ -168,7 +168,7 @@ bss_fail:
 	/* indicate (lack of) progress */
 	movw	$0x84, %ax
 	movl	$.progress3a, %ebp
-	jmp	show_boot_progress
+	jmp	show_boot_progress_asm
 .progress3a:
 	jmp	die
 
@@ -180,7 +180,7 @@ bss_ok:
 	/* indicate progress */
 	movw	$0x05, %ax
 	movl	$.progress4, %ebp
-	jmp	show_boot_progress
+	jmp	show_boot_progress_asm
 .progress4:
 
 	call	start_i386boot  /* Enter, U-boot! */
@@ -188,7 +188,7 @@ bss_ok:
 	/* indicate (lack of) progress */
 	movw	$0x85, %ax
 	movl	$.progress4a, %ebp
-	jmp	show_boot_progress
+	jmp	show_boot_progress_asm
 .progress4a:
 
 die:	hlt
diff --git a/cpu/i386/timer.c b/cpu/i386/timer.c
index 486d927a5..46db23f59 100644
--- a/cpu/i386/timer.c
+++ b/cpu/i386/timer.c
@@ -72,9 +72,9 @@ int timer_init(void)
 }
 
 
-#ifdef CFG_TIMER_GENERIC
+#ifdef CONFIG_SYS_TIMER_GENERIC
 
-/* the unit for these is CFG_HZ */
+/* the unit for these is CONFIG_SYS_HZ */
 
 /* FixMe: implement these */
 void reset_timer (void)
diff --git a/cpu/ixp/cpu.c b/cpu/ixp/cpu.c
index 2c7d5a01b..27872fb78 100644
--- a/cpu/ixp/cpu.c
+++ b/cpu/ixp/cpu.c
@@ -32,6 +32,7 @@
 
 #include <common.h>
 #include <command.h>
+#include <netdev.h>
 #include <asm/arch/ixp425.h>
 
 ulong loops_per_jiffy;
@@ -81,7 +82,7 @@ int cpu_init (void)
 	 * setup up stacks if necessary
 	 */
 #ifdef CONFIG_USE_IRQ
-	IRQ_STACK_START = _armboot_start - CFG_MALLOC_LEN - CFG_GBL_DATA_SIZE - 4;
+	IRQ_STACK_START = _armboot_start - CONFIG_SYS_MALLOC_LEN - CONFIG_SYS_GBL_DATA_SIZE - 4;
 	FIQ_STACK_START = IRQ_STACK_START - CONFIG_STACKSIZE_IRQ;
 #endif
 
@@ -198,7 +199,7 @@ void pci_init(void)
 
 void bootcount_store (ulong a)
 {
-	volatile ulong *save_addr = (volatile ulong *)(CFG_BOOTCOUNT_ADDR);
+	volatile ulong *save_addr = (volatile ulong *)(CONFIG_SYS_BOOTCOUNT_ADDR);
 
 	save_addr[0] = a;
 	save_addr[1] = BOOTCOUNT_MAGIC;
@@ -206,7 +207,7 @@ void bootcount_store (ulong a)
 
 ulong bootcount_load (void)
 {
-	volatile ulong *save_addr = (volatile ulong *)(CFG_BOOTCOUNT_ADDR);
+	volatile ulong *save_addr = (volatile ulong *)(CONFIG_SYS_BOOTCOUNT_ADDR);
 
 	if (save_addr[1] != BOOTCOUNT_MAGIC)
 		return 0;
@@ -215,3 +216,11 @@ ulong bootcount_load (void)
 }
 
 #endif /* CONFIG_BOOTCOUNT_LIMIT */
+
+int cpu_eth_init(bd_t *bis)
+{
+#ifdef CONFIG_IXP4XX_NPE
+	npe_initialize(bis);
+#endif
+	return 0;
+}
diff --git a/cpu/ixp/interrupts.c b/cpu/ixp/interrupts.c
index 84fe9378a..621f31b00 100644
--- a/cpu/ixp/interrupts.c
+++ b/cpu/ixp/interrupts.c
@@ -40,8 +40,8 @@
  */
 
 #define FREQ		66666666
-#define CLOCK_TICK_RATE	(((FREQ / CFG_HZ & ~IXP425_OST_RELOAD_MASK) + 1) * CFG_HZ)
-#define LATCH		((CLOCK_TICK_RATE + CFG_HZ/2) / CFG_HZ)	/* For divider */
+#define CLOCK_TICK_RATE	(((FREQ / CONFIG_SYS_HZ & ~IXP425_OST_RELOAD_MASK) + 1) * CONFIG_SYS_HZ)
+#define LATCH		((CLOCK_TICK_RATE + CONFIG_SYS_HZ/2) / CONFIG_SYS_HZ)	/* For divider */
 
 struct _irq_handler {
 	void                *m_data;
diff --git a/cpu/ixp/npe/include/IxEthDB_p.h b/cpu/ixp/npe/include/IxEthDB_p.h
index e7c67ae52..ccec7ea7b 100644
--- a/cpu/ixp/npe/include/IxEthDB_p.h
+++ b/cpu/ixp/npe/include/IxEthDB_p.h
@@ -193,8 +193,6 @@ extern int overflowEvent;
 #define LEFT  (-1)
 
 /* macros */
-#define MIN(a, b) ((a) < (b) ? (a) : (b))
-
 #define IX_ETH_DB_CHECK_PORT_EXISTS(portID) \
 { \
     if ((portID) >= IX_ETH_DB_NUMBER_OF_PORTS) \
diff --git a/cpu/ixp/npe/include/npe.h b/cpu/ixp/npe/include/npe.h
index e53458def..3d6f72747 100644
--- a/cpu/ixp/npe/include/npe.h
+++ b/cpu/ixp/npe/include/npe.h
@@ -27,10 +27,10 @@
 /*
  * defines...
  */
-#define CFG_NPE_NUMS		1
+#define CONFIG_SYS_NPE_NUMS		1
 #ifdef CONFIG_HAS_ETH1
-#undef CFG_NPE_NUMS
-#define CFG_NPE_NUMS		2
+#undef CONFIG_SYS_NPE_NUMS
+#define CONFIG_SYS_NPE_NUMS		2
 #endif
 
 #define NPE_NUM_PORTS		3
diff --git a/cpu/ixp/npe/miiphy.c b/cpu/ixp/npe/miiphy.c
index c63c54e28..20fee2d39 100644
--- a/cpu/ixp/npe/miiphy.c
+++ b/cpu/ixp/npe/miiphy.c
@@ -32,7 +32,7 @@
   |  Date	 Description of Change					     BY
   |  ---------	 ---------------------					     ---
   |  05-May-99	 Created						     MKW
-  |  01-Jul-99	 Changed clock setting of sta_reg from 66Mhz to 50Mhz to
+  |  01-Jul-99	 Changed clock setting of sta_reg from 66MHz to 50MHz to
   |		 better match OPB speed. Also modified delay times.	     JWB
   |  29-Jul-99	 Added Full duplex support				     MKW
   |  24-Aug-99	 Removed printf from dp83843_duplex()			     JWB
diff --git a/cpu/ixp/npe/npe.c b/cpu/ixp/npe/npe.c
index 892096b26..bd77fed37 100644
--- a/cpu/ixp/npe/npe.c
+++ b/cpu/ixp/npe/npe.c
@@ -51,7 +51,7 @@ static int npe_exists[NPE_NUM_PORTS];
 static int npe_used[NPE_NUM_PORTS];
 
 /* A little extra so we can align to cacheline. */
-static u8 npe_alloc_pool[NPE_MEM_POOL_SIZE + CFG_CACHELINE_SIZE - 1];
+static u8 npe_alloc_pool[NPE_MEM_POOL_SIZE + CONFIG_SYS_CACHELINE_SIZE - 1];
 static u8 *npe_alloc_end;
 static u8 *npe_alloc_free;
 
@@ -60,7 +60,7 @@ static void *npe_alloc(int size)
 	static int count = 0;
 	void *p = NULL;
 
-	size = (size + (CFG_CACHELINE_SIZE-1)) & ~(CFG_CACHELINE_SIZE-1);
+	size = (size + (CONFIG_SYS_CACHELINE_SIZE-1)) & ~(CONFIG_SYS_CACHELINE_SIZE-1);
 	count++;
 
 	if ((npe_alloc_free + size) < npe_alloc_end) {
@@ -399,7 +399,7 @@ static int npe_init(struct eth_device *dev, bd_t * bis)
 
 	npe_alloc_end = npe_alloc_pool + sizeof(npe_alloc_pool);
 	npe_alloc_free = (u8 *)(((unsigned)npe_alloc_pool +
-				 CFG_CACHELINE_SIZE - 1) & ~(CFG_CACHELINE_SIZE - 1));
+				 CONFIG_SYS_CACHELINE_SIZE - 1) & ~(CONFIG_SYS_CACHELINE_SIZE - 1));
 
 	/* initialize mbuf pool */
 	init_rx_mbufs(p_npe);
@@ -568,7 +568,7 @@ int npe_initialize(bd_t * bis)
 	int eth_num = 0;
 	struct npe *p_npe = NULL;
 
-	for (eth_num = 0; eth_num < CFG_NPE_NUMS; eth_num++) {
+	for (eth_num = 0; eth_num < CONFIG_SYS_NPE_NUMS; eth_num++) {
 
 		/* See if we can actually bring up the interface, otherwise, skip it */
 		switch (eth_num) {
@@ -673,8 +673,8 @@ int npe_initialize(bd_t * bis)
 
 			npe_alloc_end = npe_alloc_pool + sizeof(npe_alloc_pool);
 			npe_alloc_free = (u8 *)(((unsigned)npe_alloc_pool +
-						 CFG_CACHELINE_SIZE - 1)
-						& ~(CFG_CACHELINE_SIZE - 1));
+						 CONFIG_SYS_CACHELINE_SIZE - 1)
+						& ~(CONFIG_SYS_CACHELINE_SIZE - 1));
 
 			if (!npe_csr_load())
 				return 0;
diff --git a/cpu/ixp/serial.c b/cpu/ixp/serial.c
index 45496318a..dd26af49b 100644
--- a/cpu/ixp/serial.c
+++ b/cpu/ixp/serial.c
@@ -43,7 +43,7 @@ DECLARE_GLOBAL_DATA_PTR;
 void serial_setbrg (void)
 {
 	unsigned int quot = 0;
-	int uart = CFG_IXP425_CONSOLE;
+	int uart = CONFIG_SYS_IXP425_CONSOLE;
 
 	if ((gd->baudrate <= SERIAL_CLOCK) && (SERIAL_CLOCK % gd->baudrate == 0))
 		quot = SERIAL_CLOCK / gd->baudrate;
@@ -85,9 +85,9 @@ int serial_init (void)
 void serial_putc (const char c)
 {
 	/* wait for room in the tx FIFO on UART */
-	while ((LSR(CFG_IXP425_CONSOLE) & LSR_TEMT) == 0);
+	while ((LSR(CONFIG_SYS_IXP425_CONSOLE) & LSR_TEMT) == 0);
 
-	THR(CFG_IXP425_CONSOLE) = c;
+	THR(CONFIG_SYS_IXP425_CONSOLE) = c;
 
 	/* If \n, also do \r */
 	if (c == '\n')
@@ -101,7 +101,7 @@ void serial_putc (const char c)
  */
 int serial_tstc (void)
 {
-	return LSR(CFG_IXP425_CONSOLE) & LSR_DR;
+	return LSR(CONFIG_SYS_IXP425_CONSOLE) & LSR_DR;
 }
 
 /*
@@ -111,9 +111,9 @@ int serial_tstc (void)
  */
 int serial_getc (void)
 {
-	while (!(LSR(CFG_IXP425_CONSOLE) & LSR_DR));
+	while (!(LSR(CONFIG_SYS_IXP425_CONSOLE) & LSR_DR));
 
-	return (char) RBR(CFG_IXP425_CONSOLE) & 0xff;
+	return (char) RBR(CONFIG_SYS_IXP425_CONSOLE) & 0xff;
 }
 
 void
diff --git a/cpu/ixp/start.S b/cpu/ixp/start.S
index d4c8e33bc..196ba5db2 100644
--- a/cpu/ixp/start.S
+++ b/cpu/ixp/start.S
@@ -154,7 +154,7 @@ reset:
 	CPWAIT	r0
 
 	/* set EXP CS0 to the optimum timing */
-	ldr	r1, =CFG_EXP_CS0
+	ldr	r1, =CONFIG_SYS_EXP_CS0
 	ldr     r2, =IXP425_EXP_CS0
 	str     r1, [r2]
 
@@ -165,7 +165,7 @@ reset:
 	orr     r1, r1, #0x80000000
 	str     r1, [r2]
 #endif
-	mov	r1, #CFG_SDR_CONFIG
+	mov	r1, #CONFIG_SYS_SDR_CONFIG
 	ldr     r2, =IXP425_SDR_CONFIG
 	str     r1, [r2]
 
@@ -181,7 +181,7 @@ reset:
 	DELAY_FOR 0x4000, r0
 
 	/* set SDRAM internal refresh val */
-	ldr	r1, =CFG_SDRAM_REFRESH_CNT
+	ldr	r1, =CONFIG_SYS_SDRAM_REFRESH_CNT
 	str     r1, [r3]
 	DELAY_FOR 0x4000, r0
 
@@ -199,7 +199,7 @@ reset:
 	bne	111b
 
 	/* set mode register in sdram */
-	mov	r1, #CFG_SDR_MODE_CONFIG
+	mov	r1, #CONFIG_SYS_SDR_MODE_CONFIG
 	str	r1, [r4]
 	DELAY_FOR 0x4000, r0
 
@@ -211,7 +211,7 @@ reset:
 	/* copy */
 	mov     r0, #0
 	mov     r4, r0
-	add     r2, r0, #CFG_MONITOR_LEN
+	add     r2, r0, #CONFIG_SYS_MONITOR_LEN
 	mov     r1, #0x10000000
 	mov     r5, r1
 
@@ -283,8 +283,8 @@ copy_loop:
 	/* Set up the stack						    */
 stack_setup:
 	ldr	r0, _TEXT_BASE		/* upper 128 KiB: relocated uboot   */
-	sub	r0, r0, #CFG_MALLOC_LEN	/* malloc area                      */
-	sub	r0, r0, #CFG_GBL_DATA_SIZE /* bdinfo                        */
+	sub	r0, r0, #CONFIG_SYS_MALLOC_LEN	/* malloc area                      */
+	sub	r0, r0, #CONFIG_SYS_GBL_DATA_SIZE /* bdinfo                        */
 #ifdef CONFIG_USE_IRQ
 	sub	r0, r0, #(CONFIG_STACKSIZE_IRQ+CONFIG_STACKSIZE_FIQ)
 #endif
@@ -345,8 +345,8 @@ _start_armboot: .word start_armboot
 	add	r8, sp, #S_PC
 
 	ldr	r2, _armboot_start
-	sub	r2, r2, #(CONFIG_STACKSIZE+CFG_MALLOC_LEN)
-	sub	r2, r2, #(CFG_GBL_DATA_SIZE+8)  @ set base 2 words into abort stack
+	sub	r2, r2, #(CONFIG_STACKSIZE+CONFIG_SYS_MALLOC_LEN)
+	sub	r2, r2, #(CONFIG_SYS_GBL_DATA_SIZE+8)  @ set base 2 words into abort stack
 	ldmia	r2, {r2 - r4}			/* get pc, cpsr, old_r0	    */
 	add	r0, sp, #S_FRAME_SIZE		/* restore sp_SVC	    */
 
@@ -382,8 +382,8 @@ _start_armboot: .word start_armboot
 
 	.macro get_bad_stack
 	ldr	r13, _armboot_start		@ setup our mode stack
-	sub	r13, r13, #(CONFIG_STACKSIZE+CFG_MALLOC_LEN)
-	sub	r13, r13, #(CFG_GBL_DATA_SIZE+8) @ reserved a couple spots in abort stack
+	sub	r13, r13, #(CONFIG_STACKSIZE+CONFIG_SYS_MALLOC_LEN)
+	sub	r13, r13, #(CONFIG_SYS_GBL_DATA_SIZE+8) @ reserved a couple spots in abort stack
 
 	str	lr, [r13]			@ save caller lr / spsr
 	mrs	lr, spsr
diff --git a/cpu/ixp/timer.c b/cpu/ixp/timer.c
index 920f34e61..09d8ad560 100644
--- a/cpu/ixp/timer.c
+++ b/cpu/ixp/timer.c
@@ -44,7 +44,7 @@ void ixp425_udelay(unsigned long usec)
 	 * This function has a max usec, but since it is called from udelay
 	 * we should not have to worry... be happy
 	 */
-	unsigned long usecs = CFG_HZ/1000000L & ~IXP425_OST_RELOAD_MASK;
+	unsigned long usecs = CONFIG_SYS_HZ/1000000L & ~IXP425_OST_RELOAD_MASK;
 
 	*IXP425_OSST = IXP425_OSST_TIMER_1_PEND;
 	usecs |= IXP425_OST_ONE_SHOT | IXP425_OST_ENABLE;
diff --git a/cpu/leon2/cpu.c b/cpu/leon2/cpu.c
index 5de1c521a..d6e23b129 100644
--- a/cpu/leon2/cpu.c
+++ b/cpu/leon2/cpu.c
@@ -25,6 +25,7 @@
 #include <common.h>
 #include <watchdog.h>
 #include <command.h>
+#include <netdev.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -57,8 +58,6 @@ int do_reset(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
 
 /* ------------------------------------------------------------------------- */
 
-extern int greth_initialize(bd_t *bis);
-
 #ifdef CONFIG_GRETH
 int cpu_eth_init(bd_t *bis)
 {
diff --git a/cpu/leon2/interrupts.c b/cpu/leon2/interrupts.c
index 35b375c78..9b0da963a 100644
--- a/cpu/leon2/interrupts.c
+++ b/cpu/leon2/interrupts.c
@@ -98,8 +98,8 @@ static void leon2_ic_enable(unsigned int irq)
 void handler_irq(int irq, struct pt_regs *regs)
 {
 	if (irq_handlers[irq].handler) {
-		if (((unsigned int)irq_handlers[irq].handler > CFG_RAM_END) ||
-		    ((unsigned int)irq_handlers[irq].handler < CFG_RAM_BASE)
+		if (((unsigned int)irq_handlers[irq].handler > CONFIG_SYS_RAM_END) ||
+		    ((unsigned int)irq_handlers[irq].handler < CONFIG_SYS_RAM_BASE)
 		    ) {
 			printf("handler_irq: bad handler: %x, irq number %d\n",
 			       (unsigned int)irq_handlers[irq].handler, irq);
@@ -163,8 +163,8 @@ void irq_install_handler(int irq, interrupt_handler_t * handler, void *arg)
 		printf("irq_install_handler: 0x%08lx replacing 0x%08lx\n",
 		       (ulong) handler, (ulong) irq_handlers[irq].handler);
 
-	if (((unsigned int)handler > CFG_RAM_END) ||
-	    ((unsigned int)handler < CFG_RAM_BASE)
+	if (((unsigned int)handler > CONFIG_SYS_RAM_END) ||
+	    ((unsigned int)handler < CONFIG_SYS_RAM_BASE)
 	    ) {
 		printf("irq_install_handler: bad handler: %x, irq number %d\n",
 		       (unsigned int)handler, irq);
diff --git a/cpu/leon2/prom.c b/cpu/leon2/prom.c
index b03199577..1a6c7f79c 100644
--- a/cpu/leon2/prom.c
+++ b/cpu/leon2/prom.c
@@ -45,14 +45,14 @@ extern struct linux_romvec *kernel_arg_promvec;
 /* for __va */
 extern int __prom_start;
 #define PAGE_OFFSET 0xf0000000
-#define phys_base CFG_SDRAM_BASE
+#define phys_base CONFIG_SYS_SDRAM_BASE
 #define PROM_OFFS 8192
 #define PROM_SIZE_MASK (PROM_OFFS-1)
 #define __va(x) ( \
 	(void *)( ((unsigned long)(x))-PROM_OFFS+ \
-	(CFG_PROM_OFFSET-phys_base)+PAGE_OFFSET-TEXT_BASE ) \
+	(CONFIG_SYS_PROM_OFFSET-phys_base)+PAGE_OFFSET-TEXT_BASE ) \
 	)
-#define __phy(x) ((void *)(((unsigned long)(x))-PROM_OFFS+CFG_PROM_OFFSET-TEXT_BASE))
+#define __phy(x) ((void *)(((unsigned long)(x))-PROM_OFFS+CONFIG_SYS_PROM_OFFSET-TEXT_BASE))
 
 struct property {
 	char *name;
@@ -540,13 +540,13 @@ static struct leon_prom_info PROM_DATA spi = {
 	__va(&spi.totphys),
 	{
 	 NULL,
-	 (char *)CFG_SDRAM_BASE,
+	 (char *)CONFIG_SYS_SDRAM_BASE,
 	 0,
 	 },
 	__va(&spi.avail),
 	{
 	 NULL,
-	 (char *)CFG_SDRAM_BASE,
+	 (char *)CONFIG_SYS_SDRAM_BASE,
 	 0,
 	 },
 	NULL,			/* prommap_p */
@@ -654,7 +654,7 @@ static void PROM_TEXT leon_reboot(char *bcommand)
 
 	/* get physical address */
 	struct leon_prom_info *pspi =
-	    (void *)(CFG_PROM_OFFSET + sizeof(srmmu_tables));
+	    (void *)(CONFIG_SYS_PROM_OFFSET + sizeof(srmmu_tables));
 
 	unsigned int *srmmu_ctx_table;
 
@@ -707,7 +707,7 @@ static void PROM_TEXT leon_reboot_physical(char *bcommand)
 	srmmu_set_mmureg(0);
 
 	/* Hardcoded start address */
-	reset = CFG_MONITOR_BASE;
+	reset = CONFIG_SYS_MONITOR_BASE;
 
 	/* flush data cache */
 	sparc_dcache_flush_all();
@@ -762,7 +762,7 @@ static int PROM_TEXT no_nextnode(int node)
 {
 	/* get physical address */
 	struct leon_prom_info *pspi =
-	    (void *)(CFG_PROM_OFFSET + sizeof(srmmu_tables));
+	    (void *)(CONFIG_SYS_PROM_OFFSET + sizeof(srmmu_tables));
 
 	/* convert into virtual address */
 	pspi = (struct leon_prom_info *)
@@ -777,7 +777,7 @@ static int PROM_TEXT no_child(int node)
 {
 	/* get physical address */
 	struct leon_prom_info *pspi = (struct leon_prom_info *)
-	    (CFG_PROM_OFFSET + sizeof(srmmu_tables));
+	    (CONFIG_SYS_PROM_OFFSET + sizeof(srmmu_tables));
 
 	/* convert into virtual address */
 	pspi = (struct leon_prom_info *)
@@ -792,7 +792,7 @@ static struct property PROM_TEXT *find_property(int node, char *name)
 {
 	/* get physical address */
 	struct leon_prom_info *pspi = (struct leon_prom_info *)
-	    (CFG_PROM_OFFSET + sizeof(srmmu_tables));
+	    (CONFIG_SYS_PROM_OFFSET + sizeof(srmmu_tables));
 
 	/* convert into virtual address */
 	pspi = (struct leon_prom_info *)
@@ -811,7 +811,7 @@ static int PROM_TEXT no_proplen(int node, char *name)
 {
 	/* get physical address */
 	struct leon_prom_info *pspi = (struct leon_prom_info *)
-	    (CFG_PROM_OFFSET + sizeof(srmmu_tables));
+	    (CONFIG_SYS_PROM_OFFSET + sizeof(srmmu_tables));
 
 	/* convert into virtual address */
 	pspi = (struct leon_prom_info *)
@@ -827,7 +827,7 @@ static int PROM_TEXT no_getprop(int node, char *name, char *value)
 {
 	/* get physical address */
 	struct leon_prom_info *pspi = (struct leon_prom_info *)
-	    (CFG_PROM_OFFSET + sizeof(srmmu_tables));
+	    (CONFIG_SYS_PROM_OFFSET + sizeof(srmmu_tables));
 
 	/* convert into virtual address */
 	pspi = (struct leon_prom_info *)
@@ -850,7 +850,7 @@ static char PROM_TEXT *no_nextprop(int node, char *name)
 {
 	/* get physical address */
 	struct leon_prom_info *pspi = (struct leon_prom_info *)
-	    (CFG_PROM_OFFSET + sizeof(srmmu_tables));
+	    (CONFIG_SYS_PROM_OFFSET + sizeof(srmmu_tables));
 	struct property *prop;
 
 	/* convert into virtual address */
@@ -906,7 +906,7 @@ void leon_prom_init(struct leon_prom_info *pspi)
 	pspi->freq_khz = CONFIG_SYS_CLK_FREQ / 1000;
 
 	/* Set Available main memory size */
-	pspi->totphys.num_bytes = CFG_PROM_OFFSET - CFG_SDRAM_BASE;
+	pspi->totphys.num_bytes = CONFIG_SYS_PROM_OFFSET - CONFIG_SYS_SDRAM_BASE;
 	pspi->avail.num_bytes = pspi->totphys.num_bytes;
 
 #undef nodes
@@ -951,7 +951,7 @@ extern unsigned short bss_start, bss_end;
 int prom_init(void)
 {
 	struct leon_prom_info *pspi = (void *)
-	    ((((unsigned int)&spi) & PROM_SIZE_MASK) + CFG_PROM_OFFSET);
+	    ((((unsigned int)&spi) & PROM_SIZE_MASK) + CONFIG_SYS_PROM_OFFSET);
 
 	/* disable mmu */
 	srmmu_set_mmureg(0x00000000);
@@ -977,7 +977,7 @@ void prepare_bootargs(char *bootargs)
 	/* if no bootargs set, skip copying ==> default bootline */
 	if (bootargs && (*bootargs != '\0')) {
 		pspi = (void *)((((unsigned int)&spi) & PROM_SIZE_MASK) +
-				CFG_PROM_OFFSET);
+				CONFIG_SYS_PROM_OFFSET);
 		src = bootargs;
 		dst = &pspi->arg[0];
 		left = 255;	/* max len */
@@ -994,7 +994,7 @@ void srmmu_init_cpu(unsigned int entry)
 {
 	sparc_srmmu_setup *psrmmu_tables = (void *)
 	    ((((unsigned int)&srmmu_tables) & PROM_SIZE_MASK) +
-	     CFG_PROM_OFFSET);
+	     CONFIG_SYS_PROM_OFFSET);
 
 	/* Make context 0 (kernel's context) point
 	 * to our prepared memory mapping
@@ -1010,21 +1010,21 @@ void srmmu_init_cpu(unsigned int entry)
 #define PTE 2
 #define ACC_SU_ALL 0x1c
 	psrmmu_tables->pgd_table[0xf0] =
-	    (CFG_SDRAM_BASE >> 4) | ACC_SU_ALL | PTE;
+	    (CONFIG_SYS_SDRAM_BASE >> 4) | ACC_SU_ALL | PTE;
 	psrmmu_tables->pgd_table[0xf1] =
-	    ((CFG_SDRAM_BASE + 0x1000000) >> 4) | ACC_SU_ALL | PTE;
+	    ((CONFIG_SYS_SDRAM_BASE + 0x1000000) >> 4) | ACC_SU_ALL | PTE;
 	psrmmu_tables->pgd_table[0xf2] =
-	    ((CFG_SDRAM_BASE + 0x2000000) >> 4) | ACC_SU_ALL | PTE;
+	    ((CONFIG_SYS_SDRAM_BASE + 0x2000000) >> 4) | ACC_SU_ALL | PTE;
 	psrmmu_tables->pgd_table[0xf3] =
-	    ((CFG_SDRAM_BASE + 0x3000000) >> 4) | ACC_SU_ALL | PTE;
+	    ((CONFIG_SYS_SDRAM_BASE + 0x3000000) >> 4) | ACC_SU_ALL | PTE;
 	psrmmu_tables->pgd_table[0xf4] =
-	    ((CFG_SDRAM_BASE + 0x4000000) >> 4) | ACC_SU_ALL | PTE;
+	    ((CONFIG_SYS_SDRAM_BASE + 0x4000000) >> 4) | ACC_SU_ALL | PTE;
 	psrmmu_tables->pgd_table[0xf5] =
-	    ((CFG_SDRAM_BASE + 0x5000000) >> 4) | ACC_SU_ALL | PTE;
+	    ((CONFIG_SYS_SDRAM_BASE + 0x5000000) >> 4) | ACC_SU_ALL | PTE;
 	psrmmu_tables->pgd_table[0xf6] =
-	    ((CFG_SDRAM_BASE + 0x6000000) >> 4) | ACC_SU_ALL | PTE;
+	    ((CONFIG_SYS_SDRAM_BASE + 0x6000000) >> 4) | ACC_SU_ALL | PTE;
 	psrmmu_tables->pgd_table[0xf7] =
-	    ((CFG_SDRAM_BASE + 0x7000000) >> 4) | ACC_SU_ALL | PTE;
+	    ((CONFIG_SYS_SDRAM_BASE + 0x7000000) >> 4) | ACC_SU_ALL | PTE;
 
 	/* convert rom vec pointer to virtual address */
 	kernel_arg_promvec = (struct linux_romvec *)
diff --git a/cpu/leon2/serial.c b/cpu/leon2/serial.c
index ce9457f5a..4f41b8e6a 100644
--- a/cpu/leon2/serial.c
+++ b/cpu/leon2/serial.c
@@ -57,7 +57,7 @@ int serial_init(void)
 	regs = (LEON2_Uart_regs *) & leon2->UART_Channel_2;
 #endif
 
-	regs->UART_Scaler = CFG_LEON2_UART1_SCALER;
+	regs->UART_Scaler = CONFIG_SYS_LEON2_UART1_SCALER;
 
 	/* Let bit 11 be unchanged (debug bit for GRMON) */
 	tmp = READ_WORD(regs->UART_Control);
diff --git a/cpu/leon2/start.S b/cpu/leon2/start.S
index f23f49937..b1f1eb5f3 100644
--- a/cpu/leon2/start.S
+++ b/cpu/leon2/start.S
@@ -27,6 +27,7 @@
 #include <asm/psr.h>
 #include <asm/stack.h>
 #include <asm/leon.h>
+#include <timestamp.h>
 #include <version.h>
 
 /* Entry for traps which jump to a programmer-specified trap handler.  */
@@ -68,7 +69,7 @@ ARGPUSH = (WINDOWSIZE + 4)
 MINFRAME = (WINDOWSIZE + ARGPUSHSIZE + 4)
 
 /* Number of register windows */
-#ifndef CFG_SPARC_NWINDOWS
+#ifndef CONFIG_SYS_SPARC_NWINDOWS
 #error Must define number of SPARC register windows, default is 8
 #endif
 
@@ -199,7 +200,7 @@ _trap_table:
 	.globl	version_string
 version_string:
 	.ascii U_BOOT_VERSION
-	.ascii " (", __DATE__, " - ", __TIME__, ")"
+	.ascii " (", U_BOOT_DATE, " - ", U_BOOT_TIME, ")"
 	.ascii CONFIG_IDENT_STRING, "\0"
 
 	.section	".text"
@@ -280,16 +281,16 @@ leon2_init_ioport:
 leon2_init_mctrl:
 
 	/* memory config register 1 */
-	set	CFG_GRLIB_MEMCFG1, %g2
+	set	CONFIG_SYS_GRLIB_MEMCFG1, %g2
 	ld	[%g1], %g3		!
 	and	%g3, 0x300, %g3
 	or	%g2, %g3, %g2
 	st	%g2, [%g1 + LEON2_MCFG1]
-	set	CFG_GRLIB_MEMCFG2, %g2		! Load memory config register 2
+	set	CONFIG_SYS_GRLIB_MEMCFG2, %g2		! Load memory config register 2
 #if !( defined(TSIM) || !defined(BZIMAGE))
 	st	%g2, [%g1 + LEON2_MCFG2]	! only for prom version, else done by "dumon -i"
 #endif
-	set	CFG_GRLIB_MEMCFG3, %g2		! Init FT register
+	set	CONFIG_SYS_GRLIB_MEMCFG3, %g2		! Init FT register
 	st	%g2, [%g1 + LEON2_ECTRL]
 	ld	[%g1 + LEON2_ECTRL], %g2
 	srl	%g2, 30, %g2
@@ -310,7 +311,7 @@ leon2_init_psr:
 	nop
 
 leon2_init_stackp:
-	set	CFG_INIT_SP_OFFSET, %fp
+	set	CONFIG_SYS_INIT_SP_OFFSET, %fp
 	andn	%fp, 0x0f, %fp
 	sub	%fp, 64, %sp
 
@@ -327,7 +328,7 @@ cpu_init_unreloc:
 reloc:
 	set	TEXT_START,%g2
 	set	DATA_END,%g3
-	set	CFG_RELOC_MONITOR_BASE,%g4
+	set	CONFIG_SYS_RELOC_MONITOR_BASE,%g4
 reloc_loop:
 	ldd	[%g2],%l0
 	ldd	[%g2+8],%l2
@@ -373,10 +374,10 @@ fixup_got:
 	set	__got_end,%g3
 /*
  * new got offset = (old GOT-PTR (read with ld) -
- *   CFG_RELOC_MONITOR_BASE(from define) ) +
+ *   CONFIG_SYS_RELOC_MONITOR_BASE(from define) ) +
  *   Destination Address (from define)
  */
-	set	CFG_RELOC_MONITOR_BASE,%g2
+	set	CONFIG_SYS_RELOC_MONITOR_BASE,%g2
 	set	TEXT_START, %g1
 	add	%g4,%g2,%g4
 	sub	%g4,%g1,%g4
@@ -397,7 +398,7 @@ got_loop:
 prom_relocate:
 	set	__prom_start, %g2
 	set	__prom_end, %g3
-	set	CFG_PROM_OFFSET, %g4
+	set	CONFIG_SYS_PROM_OFFSET, %g4
 
 prom_relocate_loop:
 	ldd	[%g2],%l0
@@ -413,7 +414,7 @@ prom_relocate_loop:
  * the new trap table address
  */
 
-	set	CFG_RELOC_MONITOR_BASE, %g2
+	set	CONFIG_SYS_RELOC_MONITOR_BASE, %g2
 	wr	%g0, %g2, %tbr
 
 /*	call	relocate*/
@@ -421,14 +422,14 @@ prom_relocate_loop:
 /* Call relocated init functions */
 jump:
 	set	cpu_init_f2,%o1
-	set	CFG_RELOC_MONITOR_BASE,%o2
+	set	CONFIG_SYS_RELOC_MONITOR_BASE,%o2
 	add	%o1,%o2,%o1
 	sub	%o1,%g1,%o1
 	call	%o1
 	clr	%o0
 
 	set	board_init_f,%o1
-	set	CFG_RELOC_MONITOR_BASE,%o2
+	set	CONFIG_SYS_RELOC_MONITOR_BASE,%o2
 	add	%o1,%o2,%o1
 	sub	%o1,%g1,%o1
 	call	%o1
@@ -454,7 +455,7 @@ _irq_entry:
 	WRITE_PAUSE
 	mov	%l7, %o0		! irq level
 	set	handler_irq, %o1
-	set	(CFG_RELOC_MONITOR_BASE-TEXT_BASE), %o2
+	set	(CONFIG_SYS_RELOC_MONITOR_BASE-TEXT_BASE), %o2
 	add	%o1, %o2, %o1
 	call	%o1
 	add	%sp, SF_REGS_SZ, %o1	! pt_regs ptr
@@ -472,7 +473,7 @@ _window_overflow:
 	mov	%wim, %l3		! Calculate next WIM
 	mov	%g1, %l7
 	srl	%l3, 1, %g1
-	sll	%l3, (CFG_SPARC_NWINDOWS-1) , %l4
+	sll	%l3, (CONFIG_SYS_SPARC_NWINDOWS-1) , %l4
 	or	%l4, %g1, %g1
 
 	save				! Get into window to be saved.
@@ -509,7 +510,7 @@ _window_underflow:
 
 	mov  %wim, %l3			! Calculate next WIM
 	sll  %l3, 1, %l4
-	srl  %l3, (CFG_SPARC_NWINDOWS-1), %l5
+	srl  %l3, (CONFIG_SYS_SPARC_NWINDOWS-1), %l5
 	or   %l5, %l4, %l5
 	mov  %l5, %wim
 	nop; nop; nop
@@ -578,7 +579,7 @@ trap_setup:
 	 */
 	srl	%t_wim, 0x1, %g2		! begin computation of new %wim
 
-	set	(CFG_SPARC_NWINDOWS-1), %g3	!NWINDOWS-1
+	set	(CONFIG_SYS_SPARC_NWINDOWS-1), %g3	!NWINDOWS-1
 
 	sll	%t_wim, %g3, %t_wim	! NWINDOWS-1
 	or	%t_wim, %g2, %g2
@@ -612,7 +613,7 @@ ret_trap_entry:
 	mov	2, %g1
 	sll	%g1, %t_psr, %g1
 
-	set	CFG_SPARC_NWINDOWS, %g2	!NWINDOWS
+	set	CONFIG_SYS_SPARC_NWINDOWS, %g2	!NWINDOWS
 
 	srl	%g1, %g2, %g2
 	or	%g1, %g2, %g1
@@ -622,7 +623,7 @@ ret_trap_entry:
 	 sll	%g2, 0x1, %g1
 
 	/* We have to grab a window before returning. */
-	set	(CFG_SPARC_NWINDOWS-1), %g3	!NWINDOWS-1
+	set	(CONFIG_SYS_SPARC_NWINDOWS-1), %g3	!NWINDOWS-1
 
 	srl	%g2, %g3,  %g2
 	or	%g1, %g2, %g1
diff --git a/cpu/leon3/cpu.c b/cpu/leon3/cpu.c
index 1725fdb09..976f31134 100644
--- a/cpu/leon3/cpu.c
+++ b/cpu/leon3/cpu.c
@@ -25,6 +25,7 @@
 #include <common.h>
 #include <watchdog.h>
 #include <command.h>
+#include <netdev.h>
 
 #include <asm/io.h>
 #include <asm/processor.h>
@@ -65,7 +66,6 @@ u64 flash_read64(void *addr)
 }
 
 /* ------------------------------------------------------------------------- */
-extern int greth_initialize(bd_t *bis);
 
 #ifdef CONFIG_GRETH
 int cpu_eth_init(bd_t *bis)
diff --git a/cpu/leon3/cpu_init.c b/cpu/leon3/cpu_init.c
index 4fe7d4b8d..be22ec26a 100644
--- a/cpu/leon3/cpu_init.c
+++ b/cpu/leon3/cpu_init.c
@@ -159,9 +159,9 @@ int init_memory_ctrl()
 		mctrl = (ambapp_dev_mctrl *) base;
 
 		/* config MCTRL memory controller */
-		mctrl->mcfg1 = CFG_GRLIB_MEMCFG1 | (mctrl->mcfg1 & 0x300);
-		mctrl->mcfg2 = CFG_GRLIB_MEMCFG2;
-		mctrl->mcfg3 = CFG_GRLIB_MEMCFG3;
+		mctrl->mcfg1 = CONFIG_SYS_GRLIB_MEMCFG1 | (mctrl->mcfg1 & 0x300);
+		mctrl->mcfg2 = CONFIG_SYS_GRLIB_MEMCFG2;
+		mctrl->mcfg3 = CONFIG_SYS_GRLIB_MEMCFG3;
 		not_found_mctrl = 0;
 	}
 
@@ -171,9 +171,9 @@ int init_memory_ctrl()
 		mctrl = (ambapp_dev_mctrl *) base;
 
 		/* config MCTRL memory controller */
-		mctrl->mcfg1 = CFG_GRLIB_FT_MEMCFG1 | (mctrl->mcfg1 & 0x300);
-		mctrl->mcfg2 = CFG_GRLIB_FT_MEMCFG2;
-		mctrl->mcfg3 = CFG_GRLIB_FT_MEMCFG3;
+		mctrl->mcfg1 = CONFIG_SYS_GRLIB_FT_MEMCFG1 | (mctrl->mcfg1 & 0x300);
+		mctrl->mcfg2 = CONFIG_SYS_GRLIB_FT_MEMCFG2;
+		mctrl->mcfg3 = CONFIG_SYS_GRLIB_FT_MEMCFG3;
 		not_found_mctrl = 0;
 	}
 
@@ -183,7 +183,7 @@ int init_memory_ctrl()
 		sdctrl = (ambapp_dev_sdctrl *) base;
 
 		/* config memory controller */
-		sdctrl->sdcfg = CFG_GRLIB_SDRAM;
+		sdctrl->sdcfg = CONFIG_SYS_GRLIB_SDRAM;
 		not_found_mctrl = 0;
 	}
 
@@ -192,8 +192,8 @@ int init_memory_ctrl()
 		ddr2spa = (ambapp_dev_ddr2spa *) ambapp_ahb_get_info(ahb, 1);
 
 		/* Config DDR2 memory controller */
-		ddr2spa->cfg1 = CFG_GRLIB_DDR2_CFG1;
-		ddr2spa->cfg3 = CFG_GRLIB_DDR2_CFG3;
+		ddr2spa->cfg1 = CONFIG_SYS_GRLIB_DDR2_CFG1;
+		ddr2spa->cfg3 = CONFIG_SYS_GRLIB_DDR2_CFG3;
 		not_found_mctrl = 0;
 	}
 
@@ -202,7 +202,7 @@ int init_memory_ctrl()
 		ddrspa = (ambapp_dev_ddrspa *) ambapp_ahb_get_info(ahb, 1);
 
 		/* Config DDR memory controller */
-		ddrspa->ctrl = CFG_GRLIB_DDR_CFG;
+		ddrspa->ctrl = CONFIG_SYS_GRLIB_DDR_CFG;
 		not_found_mctrl = 0;
 	}
 
diff --git a/cpu/leon3/interrupts.c b/cpu/leon3/interrupts.c
index 26926321a..ac6aca5d1 100644
--- a/cpu/leon3/interrupts.c
+++ b/cpu/leon3/interrupts.c
@@ -104,8 +104,8 @@ static void leon3_ic_enable(unsigned int irq)
 void handler_irq(int irq, struct pt_regs *regs)
 {
 	if (irq_handlers[irq].handler) {
-		if (((unsigned int)irq_handlers[irq].handler > CFG_RAM_END) ||
-		    ((unsigned int)irq_handlers[irq].handler < CFG_RAM_BASE)
+		if (((unsigned int)irq_handlers[irq].handler > CONFIG_SYS_RAM_END) ||
+		    ((unsigned int)irq_handlers[irq].handler < CONFIG_SYS_RAM_BASE)
 		    ) {
 			printf("handler_irq: bad handler: %x, irq number %d\n",
 			       (unsigned int)irq_handlers[irq].handler, irq);
@@ -165,8 +165,8 @@ void irq_install_handler(int irq, interrupt_handler_t * handler, void *arg)
 		printf("irq_install_handler: 0x%08lx replacing 0x%08lx\n",
 		       (ulong) handler, (ulong) irq_handlers[irq].handler);
 
-	if (((unsigned int)handler > CFG_RAM_END) ||
-	    ((unsigned int)handler < CFG_RAM_BASE)
+	if (((unsigned int)handler > CONFIG_SYS_RAM_END) ||
+	    ((unsigned int)handler < CONFIG_SYS_RAM_BASE)
 	    ) {
 		printf("irq_install_handler: bad handler: %x, irq number %d\n",
 		       (unsigned int)handler, irq);
diff --git a/cpu/leon3/prom.c b/cpu/leon3/prom.c
index 9fa2d040e..18d2fb294 100644
--- a/cpu/leon3/prom.c
+++ b/cpu/leon3/prom.c
@@ -49,14 +49,14 @@ ambapp_dev_gptimer *gptimer;
 /* for __va */
 extern int __prom_start;
 #define PAGE_OFFSET 0xf0000000
-#define phys_base CFG_SDRAM_BASE
+#define phys_base CONFIG_SYS_SDRAM_BASE
 #define PROM_OFFS 8192
 #define PROM_SIZE_MASK (PROM_OFFS-1)
 #define __va(x) ( \
 	(void *)( ((unsigned long)(x))-PROM_OFFS+ \
-	(CFG_PROM_OFFSET-phys_base)+PAGE_OFFSET-TEXT_BASE ) \
+	(CONFIG_SYS_PROM_OFFSET-phys_base)+PAGE_OFFSET-TEXT_BASE ) \
 	)
-#define __phy(x) ((void *)(((unsigned long)(x))-PROM_OFFS+CFG_PROM_OFFSET-TEXT_BASE))
+#define __phy(x) ((void *)(((unsigned long)(x))-PROM_OFFS+CONFIG_SYS_PROM_OFFSET-TEXT_BASE))
 
 struct property {
 	char *name;
@@ -545,13 +545,13 @@ static struct leon_prom_info PROM_DATA spi = {
 	__va(&spi.totphys),
 	{
 	 NULL,
-	 (char *)CFG_SDRAM_BASE,
+	 (char *)CONFIG_SYS_SDRAM_BASE,
 	 0,
 	 },
 	__va(&spi.avail),
 	{
 	 NULL,
-	 (char *)CFG_SDRAM_BASE,
+	 (char *)CONFIG_SYS_SDRAM_BASE,
 	 0,
 	 },
 	NULL,			/* prommap_p */
@@ -659,7 +659,7 @@ static void PROM_TEXT leon_reboot(char *bcommand)
 
 	/* get physical address */
 	struct leon_prom_info *pspi =
-	    (void *)(CFG_PROM_OFFSET + sizeof(srmmu_tables));
+	    (void *)(CONFIG_SYS_PROM_OFFSET + sizeof(srmmu_tables));
 
 	unsigned int *srmmu_ctx_table;
 
@@ -712,7 +712,7 @@ static void PROM_TEXT leon_reboot_physical(char *bcommand)
 	srmmu_set_mmureg(0);
 
 	/* Hardcoded start address */
-	reset = CFG_MONITOR_BASE;
+	reset = CONFIG_SYS_MONITOR_BASE;
 
 	/* flush data cache */
 	sparc_dcache_flush_all();
@@ -742,7 +742,7 @@ static int PROM_TEXT leon_nbputchar(int c)
 
 	/* get physical address */
 	struct leon_prom_info *pspi =
-	    (void *)(CFG_PROM_OFFSET + sizeof(srmmu_tables));
+	    (void *)(CONFIG_SYS_PROM_OFFSET + sizeof(srmmu_tables));
 
 	uart = (ambapp_dev_apbuart *)
 	    SPARC_BYPASS_READ(&pspi->reloc_funcs.leon3_apbuart);
@@ -778,7 +778,7 @@ static int PROM_TEXT no_nextnode(int node)
 {
 	/* get physical address */
 	struct leon_prom_info *pspi =
-	    (void *)(CFG_PROM_OFFSET + sizeof(srmmu_tables));
+	    (void *)(CONFIG_SYS_PROM_OFFSET + sizeof(srmmu_tables));
 
 	/* convert into virtual address */
 	pspi = (struct leon_prom_info *)
@@ -793,7 +793,7 @@ static int PROM_TEXT no_child(int node)
 {
 	/* get physical address */
 	struct leon_prom_info *pspi = (struct leon_prom_info *)
-	    (CFG_PROM_OFFSET + sizeof(srmmu_tables));
+	    (CONFIG_SYS_PROM_OFFSET + sizeof(srmmu_tables));
 
 	/* convert into virtual address */
 	pspi = (struct leon_prom_info *)
@@ -808,7 +808,7 @@ static struct property PROM_TEXT *find_property(int node, char *name)
 {
 	/* get physical address */
 	struct leon_prom_info *pspi = (struct leon_prom_info *)
-	    (CFG_PROM_OFFSET + sizeof(srmmu_tables));
+	    (CONFIG_SYS_PROM_OFFSET + sizeof(srmmu_tables));
 
 	/* convert into virtual address */
 	pspi = (struct leon_prom_info *)
@@ -827,7 +827,7 @@ static int PROM_TEXT no_proplen(int node, char *name)
 {
 	/* get physical address */
 	struct leon_prom_info *pspi = (struct leon_prom_info *)
-	    (CFG_PROM_OFFSET + sizeof(srmmu_tables));
+	    (CONFIG_SYS_PROM_OFFSET + sizeof(srmmu_tables));
 
 	/* convert into virtual address */
 	pspi = (struct leon_prom_info *)
@@ -843,7 +843,7 @@ static int PROM_TEXT no_getprop(int node, char *name, char *value)
 {
 	/* get physical address */
 	struct leon_prom_info *pspi = (struct leon_prom_info *)
-	    (CFG_PROM_OFFSET + sizeof(srmmu_tables));
+	    (CONFIG_SYS_PROM_OFFSET + sizeof(srmmu_tables));
 
 	/* convert into virtual address */
 	pspi = (struct leon_prom_info *)
@@ -866,7 +866,7 @@ static char PROM_TEXT *no_nextprop(int node, char *name)
 {
 	/* get physical address */
 	struct leon_prom_info *pspi = (struct leon_prom_info *)
-	    (CFG_PROM_OFFSET + sizeof(srmmu_tables));
+	    (CONFIG_SYS_PROM_OFFSET + sizeof(srmmu_tables));
 	struct property *prop;
 
 	/* convert into virtual address */
@@ -922,7 +922,7 @@ void leon_prom_init(struct leon_prom_info *pspi)
 	pspi->freq_khz = CONFIG_SYS_CLK_FREQ / 1000;
 
 	/* Set Available main memory size */
-	pspi->totphys.num_bytes = CFG_PROM_OFFSET - CFG_SDRAM_BASE;
+	pspi->totphys.num_bytes = CONFIG_SYS_PROM_OFFSET - CONFIG_SYS_SDRAM_BASE;
 	pspi->avail.num_bytes = pspi->totphys.num_bytes;
 
 	/* Set the pointer to the Console UART in romvec */
@@ -982,7 +982,7 @@ extern unsigned short bss_start, bss_end;
 int prom_init(void)
 {
 	struct leon_prom_info *pspi = (void *)
-	    ((((unsigned int)&spi) & PROM_SIZE_MASK) + CFG_PROM_OFFSET);
+	    ((((unsigned int)&spi) & PROM_SIZE_MASK) + CONFIG_SYS_PROM_OFFSET);
 
 	/* disable mmu */
 	srmmu_set_mmureg(0x00000000);
@@ -1008,7 +1008,7 @@ void prepare_bootargs(char *bootargs)
 	/* if no bootargs set, skip copying ==> default bootline */
 	if (bootargs && (*bootargs != '\0')) {
 		pspi = (void *)((((unsigned int)&spi) & PROM_SIZE_MASK) +
-				CFG_PROM_OFFSET);
+				CONFIG_SYS_PROM_OFFSET);
 		src = bootargs;
 		dst = &pspi->arg[0];
 		left = 255;	/* max len */
@@ -1025,7 +1025,7 @@ void srmmu_init_cpu(unsigned int entry)
 {
 	sparc_srmmu_setup *psrmmu_tables = (void *)
 	    ((((unsigned int)&srmmu_tables) & PROM_SIZE_MASK) +
-	     CFG_PROM_OFFSET);
+	     CONFIG_SYS_PROM_OFFSET);
 
 	/* Make context 0 (kernel's context) point
 	 * to our prepared memory mapping
@@ -1041,21 +1041,21 @@ void srmmu_init_cpu(unsigned int entry)
 #define PTE 2
 #define ACC_SU_ALL 0x1c
 	psrmmu_tables->pgd_table[0xf0] =
-	    (CFG_SDRAM_BASE >> 4) | ACC_SU_ALL | PTE;
+	    (CONFIG_SYS_SDRAM_BASE >> 4) | ACC_SU_ALL | PTE;
 	psrmmu_tables->pgd_table[0xf1] =
-	    ((CFG_SDRAM_BASE + 0x1000000) >> 4) | ACC_SU_ALL | PTE;
+	    ((CONFIG_SYS_SDRAM_BASE + 0x1000000) >> 4) | ACC_SU_ALL | PTE;
 	psrmmu_tables->pgd_table[0xf2] =
-	    ((CFG_SDRAM_BASE + 0x2000000) >> 4) | ACC_SU_ALL | PTE;
+	    ((CONFIG_SYS_SDRAM_BASE + 0x2000000) >> 4) | ACC_SU_ALL | PTE;
 	psrmmu_tables->pgd_table[0xf3] =
-	    ((CFG_SDRAM_BASE + 0x3000000) >> 4) | ACC_SU_ALL | PTE;
+	    ((CONFIG_SYS_SDRAM_BASE + 0x3000000) >> 4) | ACC_SU_ALL | PTE;
 	psrmmu_tables->pgd_table[0xf4] =
-	    ((CFG_SDRAM_BASE + 0x4000000) >> 4) | ACC_SU_ALL | PTE;
+	    ((CONFIG_SYS_SDRAM_BASE + 0x4000000) >> 4) | ACC_SU_ALL | PTE;
 	psrmmu_tables->pgd_table[0xf5] =
-	    ((CFG_SDRAM_BASE + 0x5000000) >> 4) | ACC_SU_ALL | PTE;
+	    ((CONFIG_SYS_SDRAM_BASE + 0x5000000) >> 4) | ACC_SU_ALL | PTE;
 	psrmmu_tables->pgd_table[0xf6] =
-	    ((CFG_SDRAM_BASE + 0x6000000) >> 4) | ACC_SU_ALL | PTE;
+	    ((CONFIG_SYS_SDRAM_BASE + 0x6000000) >> 4) | ACC_SU_ALL | PTE;
 	psrmmu_tables->pgd_table[0xf7] =
-	    ((CFG_SDRAM_BASE + 0x7000000) >> 4) | ACC_SU_ALL | PTE;
+	    ((CONFIG_SYS_SDRAM_BASE + 0x7000000) >> 4) | ACC_SU_ALL | PTE;
 
 	/* convert rom vec pointer to virtual address */
 	kernel_arg_promvec = (struct linux_romvec *)
diff --git a/cpu/leon3/serial.c b/cpu/leon3/serial.c
index 27d5cd380..4b2fcb866 100644
--- a/cpu/leon3/serial.c
+++ b/cpu/leon3/serial.c
@@ -58,7 +58,7 @@ int serial_init(void)
 		 *
 		 * Receiver & transmitter enable
 		 */
-		leon3_apbuart->scaler = CFG_GRLIB_APBUART_SCALER;
+		leon3_apbuart->scaler = CONFIG_SYS_GRLIB_APBUART_SCALER;
 
 		/* Let bit 11 be unchanged (debug bit for GRMON) */
 		tmp = READ_WORD(leon3_apbuart->ctrl);
diff --git a/cpu/leon3/start.S b/cpu/leon3/start.S
index d421898d8..bd634bd0c 100644
--- a/cpu/leon3/start.S
+++ b/cpu/leon3/start.S
@@ -27,6 +27,7 @@
 #include <asm/psr.h>
 #include <asm/stack.h>
 #include <asm/leon.h>
+#include <timestamp.h>
 #include <version.h>
 
 /* Entry for traps which jump to a programmer-specified trap handler.  */
@@ -68,7 +69,7 @@ ARGPUSH = (WINDOWSIZE + 4)
 MINFRAME = (WINDOWSIZE + ARGPUSHSIZE + 4)
 
 /* Number of register windows */
-#ifndef CFG_SPARC_NWINDOWS
+#ifndef CONFIG_SYS_SPARC_NWINDOWS
 #error Must define number of SPARC register windows, default is 8
 #endif
 
@@ -200,7 +201,7 @@ _trap_table:
 	.globl	version_string
 version_string:
 	.ascii U_BOOT_VERSION
-	.ascii " (", __DATE__, " - ", __TIME__, ")"
+	.ascii " (", U_BOOT_DATE, " - ", U_BOOT_TIME, ")"
 	.ascii CONFIG_IDENT_STRING, "\0"
 
 	.section	".text"
@@ -251,7 +252,7 @@ wininit:
 	mov	%g3, %wim
 
 stackp:
-	set	CFG_INIT_SP_OFFSET, %fp
+	set	CONFIG_SYS_INIT_SP_OFFSET, %fp
 	andn	%fp, 0x0f, %fp
 	sub	%fp, 64, %sp
 
@@ -268,7 +269,7 @@ cpu_init_unreloc:
 reloc:
 	set	TEXT_START,%g2
 	set	DATA_END,%g3
-	set	CFG_RELOC_MONITOR_BASE,%g4
+	set	CONFIG_SYS_RELOC_MONITOR_BASE,%g4
 reloc_loop:
 	ldd	[%g2],%l0
 	ldd	[%g2+8],%l2
@@ -314,10 +315,10 @@ fixup_got:
 	set	__got_end,%g3
 /*
  * new got offset = (old GOT-PTR (read with ld) -
- *   CFG_RELOC_MONITOR_BASE(from define) ) +
+ *   CONFIG_SYS_RELOC_MONITOR_BASE(from define) ) +
  *   Destination Address (from define)
  */
-	set	CFG_RELOC_MONITOR_BASE,%g2
+	set	CONFIG_SYS_RELOC_MONITOR_BASE,%g2
 	set	TEXT_START, %g1
 	add	%g4,%g2,%g4
 	sub	%g4,%g1,%g4
@@ -338,7 +339,7 @@ got_loop:
 prom_relocate:
 	set	__prom_start, %g2
 	set	__prom_end, %g3
-	set	CFG_PROM_OFFSET, %g4
+	set	CONFIG_SYS_PROM_OFFSET, %g4
 
 prom_relocate_loop:
 	ldd	[%g2],%l0
@@ -354,7 +355,7 @@ prom_relocate_loop:
  * the new trap table address
  */
 
-	set	CFG_RELOC_MONITOR_BASE, %g2
+	set	CONFIG_SYS_RELOC_MONITOR_BASE, %g2
 	wr	%g0, %g2, %tbr
 	nop
 	nop
@@ -368,22 +369,22 @@ snoop_detect:
 	sethi	%hi(0x00800000), %o0
 	lda	[%g0] 2, %o1
 	and	%o0, %o1, %o0
-	sethi	%hi(leon3_snooping_avail+CFG_RELOC_MONITOR_BASE-TEXT_BASE), %o1
-	st	%o0, [%lo(leon3_snooping_avail+CFG_RELOC_MONITOR_BASE-TEXT_BASE)+%o1]
+	sethi	%hi(leon3_snooping_avail+CONFIG_SYS_RELOC_MONITOR_BASE-TEXT_BASE), %o1
+	st	%o0, [%lo(leon3_snooping_avail+CONFIG_SYS_RELOC_MONITOR_BASE-TEXT_BASE)+%o1]
 
 /*	call	relocate*/
 	nop
 /* Call relocated init functions */
 jump:
 	set	cpu_init_f2,%o1
-	set	CFG_RELOC_MONITOR_BASE,%o2
+	set	CONFIG_SYS_RELOC_MONITOR_BASE,%o2
 	add	%o1,%o2,%o1
 	sub	%o1,%g1,%o1
 	call	%o1
 	clr	%o0
 
 	set	board_init_f,%o1
-	set	CFG_RELOC_MONITOR_BASE,%o2
+	set	CONFIG_SYS_RELOC_MONITOR_BASE,%o2
 	add	%o1,%o2,%o1
 	sub	%o1,%g1,%o1
 	call	%o1
@@ -409,7 +410,7 @@ _irq_entry:
 	WRITE_PAUSE
 	mov	%l7, %o0		! irq level
 	set	handler_irq, %o1
-	set	(CFG_RELOC_MONITOR_BASE-TEXT_BASE), %o2
+	set	(CONFIG_SYS_RELOC_MONITOR_BASE-TEXT_BASE), %o2
 	add	%o1, %o2, %o1
 	call	%o1
 	add	%sp, SF_REGS_SZ, %o1	! pt_regs ptr
@@ -427,7 +428,7 @@ _window_overflow:
 	mov	%wim, %l3		! Calculate next WIM
 	mov	%g1, %l7
 	srl	%l3, 1, %g1
-	sll	%l3, (CFG_SPARC_NWINDOWS-1) , %l4
+	sll	%l3, (CONFIG_SYS_SPARC_NWINDOWS-1) , %l4
 	or	%l4, %g1, %g1
 
 	save				! Get into window to be saved.
@@ -464,7 +465,7 @@ _window_underflow:
 
 	mov  %wim, %l3			! Calculate next WIM
 	sll  %l3, 1, %l4
-	srl  %l3, (CFG_SPARC_NWINDOWS-1), %l5
+	srl  %l3, (CONFIG_SYS_SPARC_NWINDOWS-1), %l5
 	or   %l5, %l4, %l5
 	mov  %l5, %wim
 	nop; nop; nop
@@ -533,7 +534,7 @@ trap_setup:
 	 */
 	srl	%t_wim, 0x1, %g2		! begin computation of new %wim
 
-	set	(CFG_SPARC_NWINDOWS-1), %g3	!NWINDOWS-1
+	set	(CONFIG_SYS_SPARC_NWINDOWS-1), %g3	!NWINDOWS-1
 
 	sll	%t_wim, %g3, %t_wim	! NWINDOWS-1
 	or	%t_wim, %g2, %g2
@@ -567,7 +568,7 @@ ret_trap_entry:
 	mov	2, %g1
 	sll	%g1, %t_psr, %g1
 
-	set	CFG_SPARC_NWINDOWS, %g2	!NWINDOWS
+	set	CONFIG_SYS_SPARC_NWINDOWS, %g2	!NWINDOWS
 
 	srl	%g1, %g2, %g2
 	or	%g1, %g2, %g1
@@ -577,7 +578,7 @@ ret_trap_entry:
 	 sll	%g2, 0x1, %g1
 
 	/* We have to grab a window before returning. */
-	set	(CFG_SPARC_NWINDOWS-1), %g3	!NWINDOWS-1
+	set	(CONFIG_SYS_SPARC_NWINDOWS-1), %g3	!NWINDOWS-1
 
 	srl	%g2, %g3,  %g2
 	or	%g1, %g2, %g1
diff --git a/cpu/leon3/usb_uhci.c b/cpu/leon3/usb_uhci.c
index 7910bebe1..8f99e1db1 100644
--- a/cpu/leon3/usb_uhci.c
+++ b/cpu/leon3/usb_uhci.c
@@ -901,7 +901,7 @@ int uhci_submit_rh_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
 	unsigned short wIndex;
 	unsigned short wLength;
 
-	if ((pipe & PIPE_INTERRUPT) == PIPE_INTERRUPT) {
+	if (usb_pipeint(pipe)) {
 		printf("Root-Hub submit IRQ: NOT implemented\n");
 		return 0;
 	}
diff --git a/cpu/lh7a40x/config.mk b/cpu/lh7a40x/config.mk
index 10e755beb..32fd1d1eb 100644
--- a/cpu/lh7a40x/config.mk
+++ b/cpu/lh7a40x/config.mk
@@ -31,4 +31,5 @@ PLATFORM_CPPFLAGS += -march=armv4
 #
 # ========================================================================
 PLATFORM_CPPFLAGS +=$(call cc-option,-mapcs-32,-mabi=apcs-gnu)
+PLATFORM_CPPFLAGS +=$(call cc-option,-mno-thumb-interwork,)
 PLATFORM_RELFLAGS +=$(call cc-option,-mshort-load-bytes,$(call cc-option,-malignment-traps,))
diff --git a/cpu/lh7a40x/cpu.c b/cpu/lh7a40x/cpu.c
index 578eb73e8..8ff3a3682 100644
--- a/cpu/lh7a40x/cpu.c
+++ b/cpu/lh7a40x/cpu.c
@@ -94,7 +94,7 @@ int cpu_init (void)
 	 * setup up stacks if necessary
 	 */
 #ifdef CONFIG_USE_IRQ
-	IRQ_STACK_START = _armboot_start - CFG_MALLOC_LEN - CFG_GBL_DATA_SIZE - 4;
+	IRQ_STACK_START = _armboot_start - CONFIG_SYS_MALLOC_LEN - CONFIG_SYS_GBL_DATA_SIZE - 4;
 	FIQ_STACK_START = IRQ_STACK_START - CONFIG_STACKSIZE_IRQ;
 #endif
 	return 0;
diff --git a/cpu/lh7a40x/interrupts.c b/cpu/lh7a40x/interrupts.c
index d01787f91..5acfe1a44 100644
--- a/cpu/lh7a40x/interrupts.c
+++ b/cpu/lh7a40x/interrupts.c
@@ -59,7 +59,7 @@ int interrupt_init (void)
 		/*
 		 * 10ms period with 508.469kHz clock = 5084
 		 */
-		timer_load_val = CFG_HZ/100;
+		timer_load_val = CONFIG_SYS_HZ/100;
 	}
 
 	/* load value for 10 ms timeout */
@@ -98,12 +98,12 @@ void udelay (unsigned long usec)
 	/* normalize */
 	if (usec >= 1000) {
 		tmo = usec / 1000;
-		tmo *= CFG_HZ;
+		tmo *= CONFIG_SYS_HZ;
 		tmo /= 1000;
 	}
 	else {
 		if (usec > 1) {
-			tmo = usec * CFG_HZ;
+			tmo = usec * CONFIG_SYS_HZ;
 			tmo /= (1000*1000);
 		}
 		else
@@ -152,11 +152,11 @@ void udelay_masked (unsigned long usec)
 	/* normalize */
 	if (usec >= 1000) {
 		tmo = usec / 1000;
-		tmo *= CFG_HZ;
+		tmo *= CONFIG_SYS_HZ;
 		tmo /= 1000;
 	} else {
 		if (usec > 1) {
-			tmo = usec * CFG_HZ;
+			tmo = usec * CONFIG_SYS_HZ;
 			tmo /= (1000*1000);
 		} else {
 			tmo = 1;
diff --git a/cpu/lh7a40x/start.S b/cpu/lh7a40x/start.S
index e4655d69b..11252ce33 100644
--- a/cpu/lh7a40x/start.S
+++ b/cpu/lh7a40x/start.S
@@ -172,8 +172,8 @@ copy_loop:
 	/* Set up the stack						    */
 stack_setup:
 	ldr	r0, _TEXT_BASE		/* upper 128 KiB: relocated uboot   */
-	sub	r0, r0, #CFG_MALLOC_LEN	/* malloc area                      */
-	sub	r0, r0, #CFG_GBL_DATA_SIZE /* bdinfo                        */
+	sub	r0, r0, #CONFIG_SYS_MALLOC_LEN	/* malloc area                      */
+	sub	r0, r0, #CONFIG_SYS_GBL_DATA_SIZE /* bdinfo                        */
 #ifdef CONFIG_USE_IRQ
 	sub	r0, r0, #(CONFIG_STACKSIZE_IRQ+CONFIG_STACKSIZE_FIQ)
 #endif
@@ -285,8 +285,8 @@ cpu_init_crit:
 	sub	sp, sp, #S_FRAME_SIZE
 	stmia	sp, {r0 - r12}			@ Calling r0-r12
 	ldr	r2, _armboot_start
-	sub	r2, r2, #(CONFIG_STACKSIZE+CFG_MALLOC_LEN)
-	sub	r2, r2, #(CFG_GBL_DATA_SIZE+8)  @ set base 2 words into abort stack
+	sub	r2, r2, #(CONFIG_STACKSIZE+CONFIG_SYS_MALLOC_LEN)
+	sub	r2, r2, #(CONFIG_SYS_GBL_DATA_SIZE+8)  @ set base 2 words into abort stack
 	ldmia	r2, {r2 - r3}			@ get pc, cpsr
 	add	r0, sp, #S_FRAME_SIZE		@ restore sp_SVC
 
@@ -318,8 +318,8 @@ cpu_init_crit:
 
 	.macro get_bad_stack
 	ldr	r13, _armboot_start		@ setup our mode stack
-	sub	r13, r13, #(CONFIG_STACKSIZE+CFG_MALLOC_LEN)
-	sub	r13, r13, #(CFG_GBL_DATA_SIZE+8) @ reserved a couple spots in abort stack
+	sub	r13, r13, #(CONFIG_STACKSIZE+CONFIG_SYS_MALLOC_LEN)
+	sub	r13, r13, #(CONFIG_SYS_GBL_DATA_SIZE+8) @ reserved a couple spots in abort stack
 
 	str	lr, [r13]			@ save caller lr / spsr
 	mrs	lr, spsr
diff --git a/cpu/mcf5227x/Makefile b/cpu/mcf5227x/Makefile
index d0e9b4550..44f93850e 100644
--- a/cpu/mcf5227x/Makefile
+++ b/cpu/mcf5227x/Makefile
@@ -28,7 +28,7 @@ include $(TOPDIR)/config.mk
 LIB	= lib$(CPU).a
 
 START	= start.o
-COBJS	= cpu.o speed.o cpu_init.o interrupts.o
+COBJS	= cpu.o speed.o cpu_init.o interrupts.o dspi.o
 
 SRCS	:= $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c)
 OBJS	:= $(addprefix $(obj),$(SOBJS) $(COBJS))
diff --git a/cpu/mcf5227x/cpu.c b/cpu/mcf5227x/cpu.c
index 5792a1c08..d9f5f43c3 100644
--- a/cpu/mcf5227x/cpu.c
+++ b/cpu/mcf5227x/cpu.c
@@ -60,15 +60,17 @@ int checkcpu(void)
 	}
 
 	if (id) {
+		char buf1[32], buf2[32], buf3[32];
+
 		printf("Freescale MCF%d (Mask:%01x Version:%x)\n", id, msk,
 		       ver);
-		printf("       CPU CLK %d Mhz BUS CLK %d Mhz FLB CLK %d Mhz\n",
-		       (int)(gd->cpu_clk / 1000000),
-		       (int)(gd->bus_clk / 1000000),
-		       (int)(gd->flb_clk / 1000000));
-		printf("       INP CLK %d Mhz VCO CLK %d Mhz\n",
-		       (int)(gd->inp_clk / 1000000),
-		       (int)(gd->vco_clk / 1000000));
+		printf("       CPU CLK %s MHz BUS CLK %s MHz FLB CLK %s MHz\n",
+		       strmhz(buf1, gd->cpu_clk),
+		       strmhz(buf2, gd->bus_clk),
+		       strmhz(buf3, gd->flb_clk));
+		printf("       INP CLK %s MHz VCO CLK %s MHz\n",
+		       strmhz(buf1, gd->inp_clk),
+		       strmhz(buf2, gd->vco_clk));
 	}
 
 	return 0;
diff --git a/cpu/mcf5227x/cpu_init.c b/cpu/mcf5227x/cpu_init.c
index cf29559e7..8945ef316 100644
--- a/cpu/mcf5227x/cpu_init.c
+++ b/cpu/mcf5227x/cpu_init.c
@@ -45,6 +45,7 @@ void cpu_init_f(void)
 	volatile fbcs_t *fbcs = (fbcs_t *) MMAP_FBCS;
 	volatile pll_t *pll = (volatile pll_t *)MMAP_PLL;
 
+#if !defined(CONFIG_CF_SBF)
 	/* Workaround, must place before fbcs */
 	pll->psr = 0x12;
 
@@ -58,40 +59,47 @@ void cpu_init_f(void)
 	scm1->pacrg = 0;
 	scm1->pacri = 0;
 
-#if (defined(CFG_CS0_BASE) && defined(CFG_CS0_MASK) && defined(CFG_CS0_CTRL))
-	fbcs->csar0 = CFG_CS0_BASE;
-	fbcs->cscr0 = CFG_CS0_CTRL;
-	fbcs->csmr0 = CFG_CS0_MASK;
+#if (defined(CONFIG_SYS_CS0_BASE) && defined(CONFIG_SYS_CS0_MASK) \
+     && defined(CONFIG_SYS_CS0_CTRL))
+	fbcs->csar0 = CONFIG_SYS_CS0_BASE;
+	fbcs->cscr0 = CONFIG_SYS_CS0_CTRL;
+	fbcs->csmr0 = CONFIG_SYS_CS0_MASK;
 #endif
+#endif				/* CONFIG_CF_SBF */
 
-#if (defined(CFG_CS1_BASE) && defined(CFG_CS1_MASK) && defined(CFG_CS1_CTRL))
-	fbcs->csar1 = CFG_CS1_BASE;
-	fbcs->cscr1 = CFG_CS1_CTRL;
-	fbcs->csmr1 = CFG_CS1_MASK;
+#if (defined(CONFIG_SYS_CS1_BASE) && defined(CONFIG_SYS_CS1_MASK) \
+     && defined(CONFIG_SYS_CS1_CTRL))
+	fbcs->csar1 = CONFIG_SYS_CS1_BASE;
+	fbcs->cscr1 = CONFIG_SYS_CS1_CTRL;
+	fbcs->csmr1 = CONFIG_SYS_CS1_MASK;
 #endif
 
-#if (defined(CFG_CS2_BASE) && defined(CFG_CS2_MASK) && defined(CFG_CS2_CTRL))
-	fbcs->csar2 = CFG_CS2_BASE;
-	fbcs->cscr2 = CFG_CS2_CTRL;
-	fbcs->csmr2 = CFG_CS2_MASK;
+#if (defined(CONFIG_SYS_CS2_BASE) && defined(CONFIG_SYS_CS2_MASK) \
+     && defined(CONFIG_SYS_CS2_CTRL))
+	fbcs->csar2 = CONFIG_SYS_CS2_BASE;
+	fbcs->cscr2 = CONFIG_SYS_CS2_CTRL;
+	fbcs->csmr2 = CONFIG_SYS_CS2_MASK;
 #endif
 
-#if (defined(CFG_CS3_BASE) && defined(CFG_CS3_MASK) && defined(CFG_CS3_CTRL))
-	fbcs->csar3 = CFG_CS3_BASE;
-	fbcs->cscr3 = CFG_CS3_CTRL;
-	fbcs->csmr3 = CFG_CS3_MASK;
+#if (defined(CONFIG_SYS_CS3_BASE) && defined(CONFIG_SYS_CS3_MASK) \
+     && defined(CONFIG_SYS_CS3_CTRL))
+	fbcs->csar3 = CONFIG_SYS_CS3_BASE;
+	fbcs->cscr3 = CONFIG_SYS_CS3_CTRL;
+	fbcs->csmr3 = CONFIG_SYS_CS3_MASK;
 #endif
 
-#if (defined(CFG_CS4_BASE) && defined(CFG_CS4_MASK) && defined(CFG_CS4_CTRL))
-	fbcs->csar4 = CFG_CS4_BASE;
-	fbcs->cscr4 = CFG_CS4_CTRL;
-	fbcs->csmr4 = CFG_CS4_MASK;
+#if (defined(CONFIG_SYS_CS4_BASE) && defined(CONFIG_SYS_CS4_MASK) \
+     && defined(CONFIG_SYS_CS4_CTRL))
+	fbcs->csar4 = CONFIG_SYS_CS4_BASE;
+	fbcs->cscr4 = CONFIG_SYS_CS4_CTRL;
+	fbcs->csmr4 = CONFIG_SYS_CS4_MASK;
 #endif
 
-#if (defined(CFG_CS5_BASE) && defined(CFG_CS5_MASK) && defined(CFG_CS5_CTRL))
-	fbcs->csar5 = CFG_CS5_BASE;
-	fbcs->cscr5 = CFG_CS5_CTRL;
-	fbcs->csmr5 = CFG_CS5_MASK;
+#if (defined(CONFIG_SYS_CS5_BASE) && defined(CONFIG_SYS_CS5_MASK) \
+     && defined(CONFIG_SYS_CS5_CTRL))
+	fbcs->csar5 = CONFIG_SYS_CS5_BASE;
+	fbcs->cscr5 = CONFIG_SYS_CS5_CTRL;
+	fbcs->csmr5 = CONFIG_SYS_CS5_MASK;
 #endif
 
 #ifdef CONFIG_FSL_I2C
@@ -107,12 +115,12 @@ void cpu_init_f(void)
 int cpu_init_r(void)
 {
 #ifdef CONFIG_MCFRTC
-	volatile rtc_t *rtc = (volatile rtc_t *)(CFG_MCFRTC_BASE);
+	volatile rtc_t *rtc = (volatile rtc_t *)(CONFIG_SYS_MCFRTC_BASE);
 	volatile rtcex_t *rtcex = (volatile rtcex_t *)&rtc->extended;
-	u32 oscillator = CFG_RTC_OSCILLATOR;
+	u32 oscillator = CONFIG_SYS_RTC_OSCILLATOR;
 
-	rtcex->gocu = (CFG_RTC_OSCILLATOR >> 16) & 0xFFFF;
-	rtcex->gocl = CFG_RTC_OSCILLATOR & 0xFFFF;
+	rtcex->gocu = (CONFIG_SYS_RTC_OSCILLATOR >> 16) & 0xFFFF;
+	rtcex->gocl = CONFIG_SYS_RTC_OSCILLATOR & 0xFFFF;
 #endif
 
 	return (0);
@@ -123,7 +131,7 @@ void uart_port_conf(void)
 	volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO;
 
 	/* Setup Ports: */
-	switch (CFG_UART_PORT) {
+	switch (CONFIG_SYS_UART_PORT) {
 	case 0:
 		gpio->par_uart &=
 		    (GPIO_PAR_UART_U0TXD_MASK & GPIO_PAR_UART_U0RXD_MASK);
diff --git a/cpu/mcf5227x/dspi.c b/cpu/mcf5227x/dspi.c
new file mode 100644
index 000000000..7f48f9184
--- /dev/null
+++ b/cpu/mcf5227x/dspi.c
@@ -0,0 +1,261 @@
+/*
+ *
+ * (C) Copyright 2000-2003
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * Copyright (C) 2004-2008 Freescale Semiconductor, Inc.
+ * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <spi.h>
+#include <malloc.h>
+
+#if defined(CONFIG_CF_DSPI)
+#include <asm/immap.h>
+
+void dspi_init(void)
+{
+	volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO;
+	volatile dspi_t *dspi = (dspi_t *) MMAP_DSPI;
+
+	gpio->par_dspi =
+	    GPIO_PAR_DSPI_SIN_SIN | GPIO_PAR_DSPI_SOUT_SOUT |
+	    GPIO_PAR_DSPI_SCK_SCK;
+
+	dspi->dmcr = DSPI_DMCR_MSTR | DSPI_DMCR_CSIS7 | DSPI_DMCR_CSIS6 |
+	    DSPI_DMCR_CSIS5 | DSPI_DMCR_CSIS4 | DSPI_DMCR_CSIS3 |
+	    DSPI_DMCR_CSIS2 | DSPI_DMCR_CSIS1 | DSPI_DMCR_CSIS0 |
+	    DSPI_DMCR_CRXF | DSPI_DMCR_CTXF;
+
+#ifdef CONFIG_SYS_DSPI_DCTAR0
+	dspi->dctar0 = CONFIG_SYS_DSPI_DCTAR0;
+#endif
+#ifdef CONFIG_SYS_DSPI_DCTAR1
+	dspi->dctar1 = CONFIG_SYS_DSPI_DCTAR1;
+#endif
+#ifdef CONFIG_SYS_DSPI_DCTAR2
+	dspi->dctar2 = CONFIG_SYS_DSPI_DCTAR2;
+#endif
+#ifdef CONFIG_SYS_DSPI_DCTAR3
+	dspi->dctar3 = CONFIG_SYS_DSPI_DCTAR3;
+#endif
+#ifdef CONFIG_SYS_DSPI_DCTAR4
+	dspi->dctar4 = CONFIG_SYS_DSPI_DCTAR4;
+#endif
+#ifdef CONFIG_SYS_DSPI_DCTAR5
+	dspi->dctar5 = CONFIG_SYS_DSPI_DCTAR5;
+#endif
+#ifdef CONFIG_SYS_DSPI_DCTAR6
+	dspi->dctar6 = CONFIG_SYS_DSPI_DCTAR6;
+#endif
+#ifdef CONFIG_SYS_DSPI_DCTAR7
+	dspi->dctar7 = CONFIG_SYS_DSPI_DCTAR7;
+#endif
+}
+
+void dspi_tx(int chipsel, u8 attrib, u16 data)
+{
+	volatile dspi_t *dspi = (dspi_t *) MMAP_DSPI;
+
+	while ((dspi->dsr & 0x0000F000) >= 4) ;
+
+	dspi->dtfr = (attrib << 24) | ((1 << chipsel) << 16) | data;
+}
+
+u16 dspi_rx(void)
+{
+	volatile dspi_t *dspi = (dspi_t *) MMAP_DSPI;
+
+	while ((dspi->dsr & 0x000000F0) == 0) ;
+
+	return (dspi->drfr & 0xFFFF);
+}
+
+#if defined(CONFIG_CMD_SPI)
+void spi_init_f(void)
+{
+}
+
+void spi_init_r(void)
+{
+}
+
+void spi_init(void)
+{
+	dspi_init();
+}
+
+struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs,
+				  unsigned int max_hz, unsigned int mode)
+{
+	volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO;
+	struct spi_slave *slave;
+
+	slave = malloc(sizeof(struct spi_slave));
+	if (!slave)
+		return NULL;
+
+	switch (cs) {
+	case 0:
+		gpio->par_dspi &= ~GPIO_PAR_DSPI_PCS0_PCS0;
+		gpio->par_dspi |= GPIO_PAR_DSPI_PCS0_PCS0;
+		break;
+	case 2:
+		gpio->par_timer &= GPIO_PAR_TIMER_T2IN_MASK;
+		gpio->par_timer |= GPIO_PAR_TIMER_T2IN_DSPIPCS2;
+		break;
+	}
+
+	slave->bus = bus;
+	slave->cs = cs;
+
+	return slave;
+}
+
+void spi_free_slave(struct spi_slave *slave)
+{
+	volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO;
+
+	switch (slave->cs) {
+	case 0:
+		gpio->par_dspi &= ~GPIO_PAR_DSPI_PCS0_PCS0;
+		break;
+	case 2:
+		gpio->par_timer &= GPIO_PAR_TIMER_T2IN_MASK;
+		break;
+	}
+
+	free(slave);
+}
+
+int spi_claim_bus(struct spi_slave *slave)
+{
+	return 0;
+}
+
+void spi_release_bus(struct spi_slave *slave)
+{
+}
+
+int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *dout,
+	     void *din, unsigned long flags)
+{
+	static int bWrite = 0;
+	u8 *spi_rd, *spi_wr;
+	int len = bitlen >> 3;
+
+	spi_rd = (u8 *) din;
+	spi_wr = (u8 *) dout;
+
+	/* command handling */
+	if (((len == 4) || (len == 1) || (len == 5)) && (dout != NULL)) {
+		switch (*spi_wr) {
+		case 0x02:	/* Page Prog */
+			bWrite = 1;
+			dspi_tx(slave->cs, 0x80, spi_wr[0]);
+			dspi_rx();
+			dspi_tx(slave->cs, 0x80, spi_wr[1]);
+			dspi_rx();
+			dspi_tx(slave->cs, 0x80, spi_wr[2]);
+			dspi_rx();
+			dspi_tx(slave->cs, 0x80, spi_wr[3]);
+			dspi_rx();
+			return 0;
+		case 0x05:	/* Read Status */
+			if (len == 4)
+				if ((spi_wr[1] == 0xFF) && (spi_wr[2] == 0xFF)
+				    && (spi_wr[3] == 0xFF)) {
+					dspi_tx(slave->cs, 0x80, *spi_wr);
+					dspi_rx();
+				}
+			return 0;
+		case 0x06:	/* WREN */
+			dspi_tx(slave->cs, 0x00, *spi_wr);
+			dspi_rx();
+			return 0;
+		case 0x0B:	/* Fast read */
+			if ((len == 5) && (spi_wr[4] == 0)) {
+				dspi_tx(slave->cs, 0x80, spi_wr[0]);
+				dspi_rx();
+				dspi_tx(slave->cs, 0x80, spi_wr[1]);
+				dspi_rx();
+				dspi_tx(slave->cs, 0x80, spi_wr[2]);
+				dspi_rx();
+				dspi_tx(slave->cs, 0x80, spi_wr[3]);
+				dspi_rx();
+				dspi_tx(slave->cs, 0x80, spi_wr[4]);
+				dspi_rx();
+			}
+			return 0;
+		case 0x9F:	/* RDID */
+			dspi_tx(slave->cs, 0x80, *spi_wr);
+			dspi_rx();
+			return 0;
+		case 0xD8:	/* Sector erase */
+			if (len == 4)
+				if ((spi_wr[2] == 0) && (spi_wr[3] == 0)) {
+					dspi_tx(slave->cs, 0x80, spi_wr[0]);
+					dspi_rx();
+					dspi_tx(slave->cs, 0x80, spi_wr[1]);
+					dspi_rx();
+					dspi_tx(slave->cs, 0x80, spi_wr[2]);
+					dspi_rx();
+					dspi_tx(slave->cs, 0x00, spi_wr[3]);
+					dspi_rx();
+				}
+			return 0;
+		}
+	}
+
+	if (bWrite)
+		len--;
+
+	while (len--) {
+		if (dout != NULL) {
+			dspi_tx(slave->cs, 0x80, *spi_wr);
+			dspi_rx();
+			spi_wr++;
+		}
+
+		if (din != NULL) {
+			dspi_tx(slave->cs, 0x80, 0);
+			*spi_rd = dspi_rx();
+			spi_rd++;
+		}
+	}
+
+	if (flags == SPI_XFER_END) {
+		if (bWrite) {
+			dspi_tx(slave->cs, 0x00, *spi_wr);
+			dspi_rx();
+			bWrite = 0;
+		} else {
+			dspi_tx(slave->cs, 0x00, 0);
+			dspi_rx();
+		}
+	}
+
+	return 0;
+}
+#endif				/* CONFIG_CMD_SPI */
+
+#endif				/* CONFIG_CF_DSPI */
diff --git a/cpu/mcf5227x/interrupts.c b/cpu/mcf5227x/interrupts.c
index 9572a7bc3..85828a67b 100644
--- a/cpu/mcf5227x/interrupts.c
+++ b/cpu/mcf5227x/interrupts.c
@@ -31,7 +31,7 @@
 
 int interrupt_init(void)
 {
-	volatile int0_t *intp = (int0_t *) (CFG_INTR_BASE);
+	volatile int0_t *intp = (int0_t *) (CONFIG_SYS_INTR_BASE);
 
 	/* Make sure all interrupts are disabled */
 	intp->imrh0 |= 0xFFFFFFFF;
@@ -44,9 +44,9 @@ int interrupt_init(void)
 #if defined(CONFIG_MCFTMR)
 void dtimer_intr_setup(void)
 {
-	volatile int0_t *intp = (int0_t *) (CFG_INTR_BASE);
+	volatile int0_t *intp = (int0_t *) (CONFIG_SYS_INTR_BASE);
 
-	intp->icr0[CFG_TMRINTR_NO] = CFG_TMRINTR_PRI;
-	intp->imrh0 &= ~CFG_TMRINTR_MASK;
+	intp->icr0[CONFIG_SYS_TMRINTR_NO] = CONFIG_SYS_TMRINTR_PRI;
+	intp->imrh0 &= ~CONFIG_SYS_TMRINTR_MASK;
 }
 #endif
diff --git a/cpu/mcf5227x/speed.c b/cpu/mcf5227x/speed.c
index 0baf9bcd9..7e385d399 100644
--- a/cpu/mcf5227x/speed.c
+++ b/cpu/mcf5227x/speed.c
@@ -90,23 +90,39 @@ int get_clocks(void)
 	int vco, temp, pcrvalue, pfdr;
 	u8 bootmode;
 
-	bootmode = (ccm->ccr & 0x000C) >> 2;
-
 	pcrvalue = pll->pcr & 0xFF0F0FFF;
 	pfdr = pcrvalue >> 24;
 
-	if (pfdr != 0x1E) {
+	if (pfdr == 0x1E)
+		bootmode = 0;	/* Normal Mode */
+
+#ifdef CONFIG_CF_SBF
+	bootmode = 3;		/* Serial Mode */
+#endif
+
+	if (bootmode == 0) {
+		/* Normal mode */
+		vco = ((pll->pcr & 0xFF000000) >> 24) * CONFIG_SYS_INPUT_CLKSRC;
+		if ((vco < CLOCK_PLL_FVCO_MIN) || (vco > CLOCK_PLL_FVCO_MAX)) {
+			/* Default value */
+			pcrvalue = (pll->pcr & 0x00FFFFFF);
+			pcrvalue |= 0x1E << 24;
+			pll->pcr = pcrvalue;
+			vco =
+			    ((pll->pcr & 0xFF000000) >> 24) *
+			    CONFIG_SYS_INPUT_CLKSRC;
+		}
+		gd->vco_clk = vco;	/* Vco clock */
+	} else if (bootmode == 3) {
 		/* serial mode */
-	} else {
-		/* Normal Mode */
-		vco = pfdr * CFG_INPUT_CLKSRC;
-		gd->vco_clk = vco;
+		vco = ((pll->pcr & 0xFF000000) >> 24) * CONFIG_SYS_INPUT_CLKSRC;
+		gd->vco_clk = vco;	/* Vco clock */
 	}
 
 	if ((ccm->ccr & CCM_MISCCR_LIMP) == CCM_MISCCR_LIMP) {
 		/* Limp mode */
 	} else {
-		gd->inp_clk = CFG_INPUT_CLKSRC;	/* Input clock */
+		gd->inp_clk = CONFIG_SYS_INPUT_CLKSRC;	/* Input clock */
 
 		temp = (pll->pcr & PLL_PCR_OUTDIV1_MASK) + 1;
 		gd->cpu_clk = vco / temp;	/* cpu clock */
diff --git a/cpu/mcf5227x/start.S b/cpu/mcf5227x/start.S
index 1b47c9775..0c9c89c40 100644
--- a/cpu/mcf5227x/start.S
+++ b/cpu/mcf5227x/start.S
@@ -22,6 +22,7 @@
  */
 
 #include <config.h>
+#include <timestamp.h>
 #include "version.h"
 
 #ifndef	 CONFIG_IDENT_STRING
@@ -29,9 +30,9 @@
 #endif
 
 /* last three long word reserved for cache status */
-#define ICACHE_STATUS	(CFG_INIT_RAM_ADDR+CFG_INIT_RAM_END- 4)
-#define DCACHE_STATUS	(CFG_INIT_RAM_ADDR+CFG_INIT_RAM_END- 8)
-#define CACR_STATUS	(CFG_INIT_RAM_ADDR+CFG_INIT_RAM_END-12)
+#define ICACHE_STATUS	(CONFIG_SYS_INIT_RAM_ADDR+CONFIG_SYS_INIT_RAM_END- 4)
+#define DCACHE_STATUS	(CONFIG_SYS_INIT_RAM_ADDR+CONFIG_SYS_INIT_RAM_END- 8)
+#define CACR_STATUS	(CONFIG_SYS_INIT_RAM_ADDR+CONFIG_SYS_INIT_RAM_END-12)
 
 #define _START	_start
 #define _FAULT	_fault
@@ -46,6 +47,11 @@
 	addl	#60,%sp;		/* space for 15 regs */ \
 	rte;
 
+#if defined(CONFIG_CF_SBF)
+#define ASM_DRAMINIT	(asm_dram_init - TEXT_BASE + CONFIG_SYS_INIT_RAM_ADDR)
+#define ASM_SBF_IMG_HDR	(asm_sbf_img_hdr - TEXT_BASE + CONFIG_SYS_INIT_RAM_ADDR)
+#endif
+
 .text
 /*
  *	Vector table. This is used for initial platform startup.
@@ -53,8 +59,14 @@
  */
 _vectors:
 
-INITSP:		.long	0x00000000	/* Initial SP	*/
-INITPC:		.long	_START	/* Initial PC		*/
+#if defined(CONFIG_CF_SBF)
+INITSP:		.long	0		/* Initial SP	*/
+INITPC:		.long	ASM_DRAMINIT	/* Initial PC 	*/
+#else
+INITSP:		.long	0	/* Initial SP	*/
+INITPC:		.long	_START	/* Initial PC 		*/
+#endif
+
 vector02:	.long	_FAULT	/* Access Error		*/
 vector03:	.long	_FAULT	/* Address Error	*/
 vector04:	.long	_FAULT	/* Illegal Instruction	*/
@@ -83,6 +95,7 @@ vector1D:	.long	_FAULT	/* Autovector Level 5	*/
 vector1E:	.long	_FAULT	/* Autovector Level 6	*/
 vector1F:	.long	_FAULT	/* Autovector Level 7	*/
 
+#if !defined(CONFIG_CF_SBF)
 /* TRAP #0 - #15 */
 vector20_2F:
 .long	_FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
@@ -122,9 +135,231 @@ vector192_255:
 .long	_FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
 .long	_FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
 .long	_FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
+#endif
 
-	.text
+#if defined(CONFIG_CF_SBF)
+	/* Image header: chksum 4 bytes, len 4 bytes, img dest 4 bytes */
+asm_sbf_img_hdr:
+	.long	0x00000000	/* checksum, not yet implemented */
+	.long	0x00020000	/* image length */
+	.long	TEXT_BASE	/* image to be relocated at */
+
+asm_dram_init:
+	move.l	#(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_RAM_CTRL), %d0
+	movec	%d0, %RAMBAR1	/* init Rambar */
+	move.l	#(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET), %sp
+	clr.l %sp@-
+
+	/* Must disable global address */
+	move.l	#0xFC008000, %a1
+	move.l	#(CONFIG_SYS_CS0_BASE), (%a1)
+	move.l	#0xFC008008, %a1
+	move.l	#(CONFIG_SYS_CS0_CTRL), (%a1)
+	move.l	#0xFC008004, %a1
+	move.l	#(CONFIG_SYS_CS0_MASK), (%a1)
+
+	/*
+	 * Dram Initialization
+	 * a1, a2, and d0
+	 */
+	/* mscr sdram */
+	move.l	#0xFC0A4074, %a1
+	move.b	#(CONFIG_SYS_SDRAM_DRV_STRENGTH), (%a1)
+	nop
+
+	/* SDRAM Chip 0 and 1 */
+	move.l	#0xFC0B8110, %a1
+	move.l	#0xFC0B8114, %a2
+
+	/* calculate the size */
+	move.l	#0x13, %d1
+	move.l	#(CONFIG_SYS_SDRAM_SIZE), %d2
+#ifdef CONFIG_SYS_SDRAM_BASE1
+	lsr.l	#1, %d2
+#endif
+
+dramsz_loop:
+	lsr.l	#1, %d2
+	add.l	#1, %d1
+	cmp.l	#1, %d2
+	bne	dramsz_loop
+
+	/* SDRAM Chip 0 and 1 */
+	move.l	#(CONFIG_SYS_SDRAM_BASE), (%a1)
+	or.l	%d1, (%a1)
+#ifdef CONFIG_SYS_SDRAM_BASE1
+	move.l	#(CONFIG_SYS_SDRAM_BASE1), (%a2)
+	or.l	%d1, (%a2)
+#endif
+	nop
+
+	/* dram cfg1 and cfg2 */
+	move.l	#0xFC0B8008, %a1
+	move.l	#(CONFIG_SYS_SDRAM_CFG1), (%a1)
+	nop
+	move.l	#0xFC0B800C, %a2
+	move.l	#(CONFIG_SYS_SDRAM_CFG2), (%a2)
+	nop
+
+	move.l	#0xFC0B8000, %a1	/* Mode */
+	move.l	#0xFC0B8004, %a2	/* Ctrl */
+
+	/* Issue PALL */
+	move.l	#(CONFIG_SYS_SDRAM_CTRL + 2), (%a2)
+	nop
+
+	/* Issue LEMR */
+	move.l	#(CONFIG_SYS_SDRAM_MODE), (%a1)
+	nop
+	move.l	#(CONFIG_SYS_SDRAM_EMOD), (%a1)
+	nop
+
+	move.l	#1000, %d0
+wait1000:
+	nop
+	subq.l	#1, %d0
+	bne	wait1000
+
+	/* Issue PALL */
+	move.l	#(CONFIG_SYS_SDRAM_CTRL + 2), (%a2)
+	nop
+
+	/* Perform two refresh cycles */
+	move.l	#(CONFIG_SYS_SDRAM_CTRL + 4), %d0
+	nop
+	move.l	%d0, (%a2)
+	move.l	%d0, (%a2)
+	nop
+
+	move.l	#(CONFIG_SYS_SDRAM_CTRL), %d0
+	and.l	#0x7FFFFFFF, %d0
+	or.l	#0x10000c00, %d0
+	move.l	%d0, (%a2)
+	nop
 
+	/*
+	 * DSPI Initialization
+	 * a0 - general, sram - 0x80008000 - 32, see M52277EVB.h
+	 * a1 - dspi status
+	 * a2 - dtfr
+	 * a3 - drfr
+	 * a4 - Dst addr
+	 */
+
+	/* Enable pins for DSPI mode - chip-selects are enabled later */
+	move.l	#0xFC0A4036, %a0
+	move.b	#0x3F, %d0
+	move.b	%d0, (%a0)
+
+	/* DSPI CS */
+#ifdef CONFIG_SYS_DSPI_CS0
+	move.b	(%a0), %d0
+	or.l	#0xC0, %d0
+	move.b	%d0, (%a0)
+#endif
+#ifdef CONFIG_SYS_DSPI_CS2
+	move.l	#0xFC0A4037, %a0
+	move.b	(%a0), %d0
+	or.l	#0x10, %d0
+	move.b	%d0, (%a0)
+#endif
+	nop
+
+	/* Configure DSPI module */
+	move.l	#0xFC05C000, %a0
+	move.l	#0x80FF0C00, (%a0)	/* Master, clear TX/RX FIFO */
+
+	move.l	#0xFC05C00C, %a0
+	move.l	#0x3E000011, (%a0)
+
+	move.l	#0xFC05C034, %a2	/* dtfr */
+	move.l	#0xFC05C03B, %a3	/* drfr */
+
+	move.l	#(ASM_SBF_IMG_HDR + 4), %a1
+	move.l	(%a1)+, %d5
+	move.l	(%a1), %a4
+
+	move.l	#(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_SBFHDR_DATA_OFFSET), %a0
+	move.l	#(CONFIG_SYS_SBFHDR_SIZE), %d4
+
+	move.l	#0xFC05C02C, %a1	/* dspi status */
+
+	/* Issue commands and address */
+	move.l	#0x8004000B, %d2	/* Fast Read Cmd */
+	jsr	asm_dspi_wr_status
+	jsr	asm_dspi_rd_status
+
+	move.l	#0x80040000, %d2	/* Address byte 2 */
+	jsr	asm_dspi_wr_status
+	jsr	asm_dspi_rd_status
+
+	move.l	#0x80040000, %d2	/* Address byte 1 */
+	jsr	asm_dspi_wr_status
+	jsr	asm_dspi_rd_status
+
+	move.l	#0x80040000, %d2	/* Address byte 0 */
+	jsr	asm_dspi_wr_status
+	jsr	asm_dspi_rd_status
+
+	move.l	#0x80040000, %d2	/* Dummy Wr and Rd */
+	jsr	asm_dspi_wr_status
+	jsr	asm_dspi_rd_status
+
+	/* Transfer serial boot header to sram */
+asm_dspi_rd_loop1:
+	move.l	#0x80040000, %d2
+	jsr	asm_dspi_wr_status
+	jsr	asm_dspi_rd_status
+
+	move.b	%d1, (%a0)		/* read, copy to dst */
+
+	add.l	#1, %a0			/* inc dst by 1 */
+	sub.l	#1, %d4			/* dec cnt by 1 */
+	bne	asm_dspi_rd_loop1
+
+	/* Transfer u-boot from serial flash to memory */
+asm_dspi_rd_loop2:
+	move.l	#0x80040000, %d2
+	jsr	asm_dspi_wr_status
+	jsr	asm_dspi_rd_status
+
+	move.b	%d1, (%a4)		/* read, copy to dst */
+
+	add.l	#1, %a4			/* inc dst by 1 */
+	sub.l	#1, %d5			/* dec cnt by 1 */
+	bne	asm_dspi_rd_loop2
+
+	move.l	#0x00040000, %d2	/* Terminate */
+	jsr	asm_dspi_wr_status
+	jsr	asm_dspi_rd_status
+
+	/* jump to memory and execute */
+	move.l	#(TEXT_BASE + 0x400), %a0
+	move.l	%a0, (%a1)
+	jmp	(%a0)
+
+asm_dspi_wr_status:
+	move.l	(%a1), %d0		/* status */
+	and.l	#0x0000F000, %d0
+	cmp.l	#0x00003000, %d0
+	bgt	asm_dspi_wr_status
+
+	move.l	%d2, (%a2)
+	rts
+
+asm_dspi_rd_status:
+	move.l	(%a1), %d0		/* status */
+	and.l	#0x000000F0, %d0
+	lsr.l	#4, %d0
+	cmp.l	#0, %d0
+	beq	asm_dspi_rd_status
+
+	move.b	(%a3), %d1
+	rts
+#endif			/* CONFIG_CF_SBF */
+
+	.text
+	. = 0x400
 	.globl	_start
 _start:
 	nop
@@ -132,11 +367,16 @@ _start:
 	move.w #0x2700,%sr		/* Mask off Interrupt */
 
 	/* Set vector base register at the beginning of the Flash */
-	move.l	#CFG_FLASH_BASE, %d0
+#if defined(CONFIG_CF_SBF)
+	move.l	#TEXT_BASE, %d0
+	movec	%d0, %VBR
+#else
+	move.l	#CONFIG_SYS_FLASH_BASE, %d0
 	movec	%d0, %VBR
 
-	move.l	#(CFG_INIT_RAM_ADDR + CFG_INIT_RAM_CTRL), %d0
+	move.l	#(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_RAM_CTRL), %d0
 	movec	%d0, %RAMBAR1
+#endif
 
 	/* initialize general use internal ram */
 	move.l #0, %d0
@@ -156,7 +396,7 @@ _start:
 
 	/* set stackpointer to end of internal ram to get some stackspace for
 	   the first c-code */
-	move.l	#(CFG_INIT_RAM_ADDR + CFG_INIT_SP_OFFSET), %sp
+	move.l	#(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET), %sp
 	clr.l %sp@-
 
 	move.l #__got_start, %a5	/* put relocation table address to a5 */
@@ -187,7 +427,7 @@ relocate_code:
 	move.l 12(%a6), %d0		/* Save copy of Global Data pointer */
 	move.l 16(%a6), %a0		/* Save copy of Destination Address */
 
-	move.l #CFG_MONITOR_BASE, %a1
+	move.l #CONFIG_SYS_MONITOR_BASE, %a1
 	move.l #__init_end, %a2
 	move.l %a0, %a3
 
@@ -202,7 +442,7 @@ relocate_code:
  * initialization, now running from RAM.
  */
 	move.l	%a0, %a1
-	add.l	#(in_ram - CFG_MONITOR_BASE), %a1
+	add.l	#(in_ram - CONFIG_SYS_MONITOR_BASE), %a1
 	jmp	(%a1)
 
 in_ram:
@@ -212,9 +452,9 @@ clear_bss:
 	 * Now clear BSS segment
 	 */
 	move.l	%a0, %a1
-	add.l	#(_sbss - CFG_MONITOR_BASE),%a1
+	add.l	#(_sbss - CONFIG_SYS_MONITOR_BASE),%a1
 	move.l	%a0, %d1
-	add.l	#(_ebss - CFG_MONITOR_BASE),%d1
+	add.l	#(_ebss - CONFIG_SYS_MONITOR_BASE),%d1
 6:
 	clr.l	(%a1)+
 	cmp.l	%a1,%d1
@@ -224,11 +464,11 @@ clear_bss:
 	 * fix got table in RAM
 	 */
 	move.l	%a0, %a1
-	add.l	#(__got_start - CFG_MONITOR_BASE),%a1
+	add.l	#(__got_start - CONFIG_SYS_MONITOR_BASE),%a1
 	move.l	%a1,%a5			/* * fix got pointer register a5 */
 
 	move.l	%a0, %a2
-	add.l	#(__got_end - CFG_MONITOR_BASE),%a2
+	add.l	#(__got_end - CONFIG_SYS_MONITOR_BASE),%a2
 
 7:
 	move.l	(%a1),%d1
@@ -240,7 +480,7 @@ clear_bss:
 
 	/* calculate relative jump to board_init_r in ram */
 	move.l %a0, %a1
-	add.l #(board_init_r - CFG_MONITOR_BASE), %a1
+	add.l #(board_init_r - CONFIG_SYS_MONITOR_BASE), %a1
 
 	/* set parameters for board_init_r */
 	move.l %a0,-(%sp)		/* dest_addr */
@@ -276,7 +516,7 @@ icache_enable:
 	move.l	#0x01200000, %d0	/* Invalid cache */
 	movec	%d0, %CACR
 
-	move.l	#(CFG_SDRAM_BASE + 0x1c000), %d0
+	move.l	#(CONFIG_SYS_SDRAM_BASE + 0x1c000), %d0
 	movec	%d0, %ACR0
 
 	move.l	#0x81600610, %d0	/* Enable cache */
@@ -352,6 +592,6 @@ dcache_status:
 	.globl	version_string
 version_string:
 	.ascii U_BOOT_VERSION
-	.ascii " (", __DATE__, " - ", __TIME__, ")"
+	.ascii " (", U_BOOT_DATE, " - ", U_BOOT_TIME, ")"
 	.ascii CONFIG_IDENT_STRING, "\0"
 	.align 4
diff --git a/cpu/mcf523x/cpu.c b/cpu/mcf523x/cpu.c
index 8d2152d9c..a1a51336c 100644
--- a/cpu/mcf523x/cpu.c
+++ b/cpu/mcf523x/cpu.c
@@ -28,6 +28,7 @@
 #include <common.h>
 #include <watchdog.h>
 #include <command.h>
+#include <netdev.h>
 
 #include <asm/immap.h>
 
@@ -59,11 +60,13 @@ int checkcpu(void)
 	}
 
 	if (id) {
+		char buf1[32], buf2[32];
+
 		printf("Freescale MCF%d (Mask:%01x Version:%x)\n", id, msk,
 		       ver);
-		printf("       CPU CLK %d Mhz BUS CLK %d Mhz\n",
-		       (int)(gd->cpu_clk / 1000000),
-		       (int)(gd->bus_clk / 1000000));
+		printf("       CPU CLK %s MHz BUS CLK %s MHz\n",
+		       strmhz(buf1, gd->cpu_clk),
+		       strmhz(buf2, gd->bus_clk));
 	}
 
 	return 0;
@@ -97,7 +100,7 @@ int watchdog_init(void)
 	u32 wdog_module = 0;
 
 	/* set timeout and enable watchdog */
-	wdog_module = ((CFG_CLK / CFG_HZ) * CONFIG_WATCHDOG_TIMEOUT);
+	wdog_module = ((CONFIG_SYS_CLK / CONFIG_SYS_HZ) * CONFIG_WATCHDOG_TIMEOUT);
 	wdog_module |= (wdog_module / 8192);
 	wdp->mr = wdog_module;
 
@@ -114,8 +117,6 @@ int watchdog_init(void)
  * 	int board_eth_init(bd_t *bis)
  */
 
-extern int mcffec_initialize(bd_t*);
-
 int cpu_eth_init(bd_t *bis)
 {
 	return mcffec_initialize(bis);
diff --git a/cpu/mcf523x/cpu_init.c b/cpu/mcf523x/cpu_init.c
index 8ab5b8ed8..3c04fd413 100644
--- a/cpu/mcf523x/cpu_init.c
+++ b/cpu/mcf523x/cpu_init.c
@@ -27,9 +27,14 @@
 
 #include <common.h>
 #include <watchdog.h>
-
 #include <asm/immap.h>
 
+#if defined(CONFIG_CMD_NET)
+#include <config.h>
+#include <net.h>
+#include <asm/fec.h>
+#endif
+
 /*
  * Breath some life into the CPU...
  *
@@ -49,69 +54,69 @@ void cpu_init_f(void)
 	wdog->cr = 0;
 #endif
 
-	scm->rambar = (CFG_INIT_RAM_ADDR | SCM_RAMBAR_BDE);
+	scm->rambar = (CONFIG_SYS_INIT_RAM_ADDR | SCM_RAMBAR_BDE);
 
 	/* Port configuration */
 	gpio->par_cs = 0;
 
-#if (defined(CFG_CS0_BASE) && defined(CFG_CS0_MASK) && defined(CFG_CS0_CTRL))
-	fbcs->csar0 = CFG_CS0_BASE;
-	fbcs->cscr0 = CFG_CS0_CTRL;
-	fbcs->csmr0 = CFG_CS0_MASK;
+#if (defined(CONFIG_SYS_CS0_BASE) && defined(CONFIG_SYS_CS0_MASK) && defined(CONFIG_SYS_CS0_CTRL))
+	fbcs->csar0 = CONFIG_SYS_CS0_BASE;
+	fbcs->cscr0 = CONFIG_SYS_CS0_CTRL;
+	fbcs->csmr0 = CONFIG_SYS_CS0_MASK;
 #endif
 
-#if (defined(CFG_CS1_BASE) && defined(CFG_CS1_MASK) && defined(CFG_CS1_CTRL))
+#if (defined(CONFIG_SYS_CS1_BASE) && defined(CONFIG_SYS_CS1_MASK) && defined(CONFIG_SYS_CS1_CTRL))
 	gpio->par_cs |= GPIO_PAR_CS_CS1;
-	fbcs->csar1 = CFG_CS1_BASE;
-	fbcs->cscr1 = CFG_CS1_CTRL;
-	fbcs->csmr1 = CFG_CS1_MASK;
+	fbcs->csar1 = CONFIG_SYS_CS1_BASE;
+	fbcs->cscr1 = CONFIG_SYS_CS1_CTRL;
+	fbcs->csmr1 = CONFIG_SYS_CS1_MASK;
 #endif
 
-#if (defined(CFG_CS2_BASE) && defined(CFG_CS2_MASK) && defined(CFG_CS2_CTRL))
+#if (defined(CONFIG_SYS_CS2_BASE) && defined(CONFIG_SYS_CS2_MASK) && defined(CONFIG_SYS_CS2_CTRL))
 	gpio->par_cs |= GPIO_PAR_CS_CS2;
-	fbcs->csar2 = CFG_CS2_BASE;
-	fbcs->cscr2 = CFG_CS2_CTRL;
-	fbcs->csmr2 = CFG_CS2_MASK;
+	fbcs->csar2 = CONFIG_SYS_CS2_BASE;
+	fbcs->cscr2 = CONFIG_SYS_CS2_CTRL;
+	fbcs->csmr2 = CONFIG_SYS_CS2_MASK;
 #endif
 
-#if (defined(CFG_CS3_BASE) && defined(CFG_CS3_MASK) && defined(CFG_CS3_CTRL))
+#if (defined(CONFIG_SYS_CS3_BASE) && defined(CONFIG_SYS_CS3_MASK) && defined(CONFIG_SYS_CS3_CTRL))
 	gpio->par_cs |= GPIO_PAR_CS_CS3;
-	fbcs->csar3 = CFG_CS3_BASE;
-	fbcs->cscr3 = CFG_CS3_CTRL;
-	fbcs->csmr3 = CFG_CS3_MASK;
+	fbcs->csar3 = CONFIG_SYS_CS3_BASE;
+	fbcs->cscr3 = CONFIG_SYS_CS3_CTRL;
+	fbcs->csmr3 = CONFIG_SYS_CS3_MASK;
 #endif
 
-#if (defined(CFG_CS4_BASE) && defined(CFG_CS4_MASK) && defined(CFG_CS4_CTRL))
+#if (defined(CONFIG_SYS_CS4_BASE) && defined(CONFIG_SYS_CS4_MASK) && defined(CONFIG_SYS_CS4_CTRL))
 	gpio->par_cs |= GPIO_PAR_CS_CS4;
-	fbcs->csar4 = CFG_CS4_BASE;
-	fbcs->cscr4 = CFG_CS4_CTRL;
-	fbcs->csmr4 = CFG_CS4_MASK;
+	fbcs->csar4 = CONFIG_SYS_CS4_BASE;
+	fbcs->cscr4 = CONFIG_SYS_CS4_CTRL;
+	fbcs->csmr4 = CONFIG_SYS_CS4_MASK;
 #endif
 
-#if (defined(CFG_CS5_BASE) && defined(CFG_CS5_MASK) && defined(CFG_CS5_CTRL))
+#if (defined(CONFIG_SYS_CS5_BASE) && defined(CONFIG_SYS_CS5_MASK) && defined(CONFIG_SYS_CS5_CTRL))
 	gpio->par_cs |= GPIO_PAR_CS_CS5;
-	fbcs->csar5 = CFG_CS5_BASE;
-	fbcs->cscr5 = CFG_CS5_CTRL;
-	fbcs->csmr5 = CFG_CS5_MASK;
+	fbcs->csar5 = CONFIG_SYS_CS5_BASE;
+	fbcs->cscr5 = CONFIG_SYS_CS5_CTRL;
+	fbcs->csmr5 = CONFIG_SYS_CS5_MASK;
 #endif
 
-#if (defined(CFG_CS6_BASE) && defined(CFG_CS6_MASK) && defined(CFG_CS6_CTRL))
+#if (defined(CONFIG_SYS_CS6_BASE) && defined(CONFIG_SYS_CS6_MASK) && defined(CONFIG_SYS_CS6_CTRL))
 	gpio->par_cs |= GPIO_PAR_CS_CS6;
-	fbcs->csar6 = CFG_CS6_BASE;
-	fbcs->cscr6 = CFG_CS6_CTRL;
-	fbcs->csmr6 = CFG_CS6_MASK;
+	fbcs->csar6 = CONFIG_SYS_CS6_BASE;
+	fbcs->cscr6 = CONFIG_SYS_CS6_CTRL;
+	fbcs->csmr6 = CONFIG_SYS_CS6_MASK;
 #endif
 
-#if (defined(CFG_CS7_BASE) && defined(CFG_CS7_MASK) && defined(CFG_CS7_CTRL))
+#if (defined(CONFIG_SYS_CS7_BASE) && defined(CONFIG_SYS_CS7_MASK) && defined(CONFIG_SYS_CS7_CTRL))
 	gpio->par_cs |= GPIO_PAR_CS_CS7;
-	fbcs->csar7 = CFG_CS7_BASE;
-	fbcs->cscr7 = CFG_CS7_CTRL;
-	fbcs->csmr7 = CFG_CS7_MASK;
+	fbcs->csar7 = CONFIG_SYS_CS7_BASE;
+	fbcs->cscr7 = CONFIG_SYS_CS7_CTRL;
+	fbcs->csmr7 = CONFIG_SYS_CS7_MASK;
 #endif
 
 #ifdef CONFIG_FSL_I2C
-	CFG_I2C_PINMUX_REG &= CFG_I2C_PINMUX_CLR;
-	CFG_I2C_PINMUX_REG |= CFG_I2C_PINMUX_SET;
+	CONFIG_SYS_I2C_PINMUX_REG &= CONFIG_SYS_I2C_PINMUX_CLR;
+	CONFIG_SYS_I2C_PINMUX_REG |= CONFIG_SYS_I2C_PINMUX_SET;
 #endif
 
 	icache_enable();
@@ -130,7 +135,7 @@ void uart_port_conf(void)
 	volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO;
 
 	/* Setup Ports: */
-	switch (CFG_UART_PORT) {
+	switch (CONFIG_SYS_UART_PORT) {
 	case 0:
 		gpio->par_uart = (GPIO_PAR_UART_U0RXD | GPIO_PAR_UART_U0TXD);
 		break;
@@ -143,3 +148,20 @@ void uart_port_conf(void)
 		break;
 	}
 }
+
+#if defined(CONFIG_CMD_NET)
+int fecpin_setclear(struct eth_device *dev, int setclear)
+{
+	volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO;
+
+	if (setclear) {
+		gpio->par_feci2c |=
+		    (GPIO_PAR_FECI2C_EMDC_FECEMDC | GPIO_PAR_FECI2C_EMDIO_FECEMDIO);
+	} else {
+		gpio->par_feci2c &=
+		    ~(GPIO_PAR_FECI2C_EMDC_MASK | GPIO_PAR_FECI2C_EMDIO_MASK);
+	}
+
+	return 0;
+}
+#endif
diff --git a/cpu/mcf523x/interrupts.c b/cpu/mcf523x/interrupts.c
index 125c53b1b..db5ccdf6d 100644
--- a/cpu/mcf523x/interrupts.c
+++ b/cpu/mcf523x/interrupts.c
@@ -28,7 +28,7 @@
 
 int interrupt_init(void)
 {
-	volatile int0_t *intp = (int0_t *) (CFG_INTR_BASE);
+	volatile int0_t *intp = (int0_t *) (CONFIG_SYS_INTR_BASE);
 
 	/* Make sure all interrupts are disabled */
 	intp->imrl0 |= 0x1;
@@ -40,10 +40,10 @@ int interrupt_init(void)
 #if defined(CONFIG_MCFTMR)
 void dtimer_intr_setup(void)
 {
-	volatile int0_t *intp = (int0_t *) (CFG_INTR_BASE);
+	volatile int0_t *intp = (int0_t *) (CONFIG_SYS_INTR_BASE);
 
-	intp->icr0[CFG_TMRINTR_NO] = CFG_TMRINTR_PRI;
+	intp->icr0[CONFIG_SYS_TMRINTR_NO] = CONFIG_SYS_TMRINTR_PRI;
 	intp->imrl0 &= ~INTC_IPRL_INT0;
-	intp->imrl0 &= ~CFG_TMRINTR_MASK;
+	intp->imrl0 &= ~CONFIG_SYS_TMRINTR_MASK;
 }
 #endif
diff --git a/cpu/mcf523x/speed.c b/cpu/mcf523x/speed.c
index 1bda2d482..6096ba414 100644
--- a/cpu/mcf523x/speed.c
+++ b/cpu/mcf523x/speed.c
@@ -42,7 +42,7 @@ int get_clocks(void)
 
 	while (!(pll->synsr & PLL_SYNSR_LOCK));
 
-	gd->bus_clk = CFG_CLK;
+	gd->bus_clk = CONFIG_SYS_CLK;
 	gd->cpu_clk = (gd->bus_clk * 2);
 
 #ifdef CONFIG_FSL_I2C
diff --git a/cpu/mcf523x/start.S b/cpu/mcf523x/start.S
index 2b638dfef..d44da37ec 100644
--- a/cpu/mcf523x/start.S
+++ b/cpu/mcf523x/start.S
@@ -22,6 +22,7 @@
  */
 
 #include <config.h>
+#include <timestamp.h>
 #include "version.h"
 
 #ifndef	 CONFIG_IDENT_STRING
@@ -127,10 +128,10 @@ _start:
 	move.w #0x2700,%sr	/* Mask off Interrupt */
 
 	/* Set vector base register at the beginning of the Flash */
-	move.l	#CFG_FLASH_BASE, %d0
+	move.l	#CONFIG_SYS_FLASH_BASE, %d0
 	movec	%d0, %VBR
 
-	move.l	#(CFG_INIT_RAM_ADDR + CFG_INIT_RAM_CTRL), %d0
+	move.l	#(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_RAM_CTRL), %d0
 	movec	%d0, %RAMBAR1
 
 	/* invalidate and disable cache */
@@ -143,14 +144,14 @@ _start:
 
 	/* initialize general use internal ram */
 	move.l #0, %d0
-	move.l #(CFG_INIT_RAM_ADDR+CFG_INIT_RAM_END-8), %a1
-	move.l #(CFG_INIT_RAM_ADDR+CFG_INIT_RAM_END-4), %a2
+	move.l #(CONFIG_SYS_INIT_RAM_ADDR+CONFIG_SYS_INIT_RAM_END-8), %a1
+	move.l #(CONFIG_SYS_INIT_RAM_ADDR+CONFIG_SYS_INIT_RAM_END-4), %a2
 	move.l %d0, (%a1)
 	move.l %d0, (%a2)
 
 	/* set stackpointer to end of internal ram to get some stackspace for the
 	   first c-code */
-	move.l	#(CFG_INIT_RAM_ADDR + CFG_INIT_SP_OFFSET), %sp
+	move.l	#(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET), %sp
 	clr.l %sp@-
 
 	move.l #__got_start, %a5	/* put relocation table address to a5 */
@@ -181,7 +182,7 @@ relocate_code:
 	move.l 12(%a6), %d0		/* Save copy of Global Data pointer */
 	move.l 16(%a6), %a0		/* Save copy of Destination Address */
 
-	move.l #CFG_MONITOR_BASE, %a1
+	move.l #CONFIG_SYS_MONITOR_BASE, %a1
 	move.l #__init_end, %a2
 	move.l %a0, %a3
 
@@ -196,7 +197,7 @@ relocate_code:
  * initialization, now running from RAM.
  */
 	move.l	%a0, %a1
-	add.l	#(in_ram - CFG_MONITOR_BASE), %a1
+	add.l	#(in_ram - CONFIG_SYS_MONITOR_BASE), %a1
 	jmp	(%a1)
 
 in_ram:
@@ -206,9 +207,9 @@ clear_bss:
 	 * Now clear BSS segment
 	 */
 	move.l	%a0, %a1
-	add.l	#(_sbss - CFG_MONITOR_BASE),%a1
+	add.l	#(_sbss - CONFIG_SYS_MONITOR_BASE),%a1
 	move.l	%a0, %d1
-	add.l	#(_ebss - CFG_MONITOR_BASE),%d1
+	add.l	#(_ebss - CONFIG_SYS_MONITOR_BASE),%d1
 6:
 	clr.l	(%a1)+
 	cmp.l	%a1,%d1
@@ -218,11 +219,11 @@ clear_bss:
 	 * fix got table in RAM
 	 */
 	move.l	%a0, %a1
-	add.l	#(__got_start - CFG_MONITOR_BASE),%a1
+	add.l	#(__got_start - CONFIG_SYS_MONITOR_BASE),%a1
 	move.l	%a1,%a5		/* * fix got pointer register a5 */
 
 	move.l	%a0, %a2
-	add.l	#(__got_end - CFG_MONITOR_BASE),%a2
+	add.l	#(__got_end - CONFIG_SYS_MONITOR_BASE),%a2
 
 7:
 	move.l	(%a1),%d1
@@ -234,7 +235,7 @@ clear_bss:
 
 	/* calculate relative jump to board_init_r in ram */
 	move.l %a0, %a1
-	add.l #(board_init_r - CFG_MONITOR_BASE), %a1
+	add.l #(board_init_r - CONFIG_SYS_MONITOR_BASE), %a1
 
 	/* set parameters for board_init_r */
 	move.l %a0,-(%sp)		/* dest_addr */
@@ -270,16 +271,16 @@ icache_enable:
 	move.l	#0x01000000, %d0		/* Invalidate cache cmd */
 	movec	%d0, %CACR			/* Invalidate cache */
 	nop
-	move.l	#(CFG_SDRAM_BASE + 0xc000), %d0	/* Setup cache mask */
+	move.l	#(CONFIG_SYS_SDRAM_BASE + 0xc000), %d0	/* Setup cache mask */
 	movec	%d0, %ACR0			/* Enable cache */
-	move.l	#(CFG_FLASH_BASE + 0xc000), %d0	/* Setup cache mask */
+	move.l	#(CONFIG_SYS_FLASH_BASE + 0xc000), %d0	/* Setup cache mask */
 	movec	%d0, %ACR1			/* Enable cache */
 
 	move.l	#0x80400100, %d0		/* Setup cache mask */
 	movec	%d0, %CACR			/* Enable cache */
 	nop
 
-	move.l #(CFG_INIT_RAM_ADDR+CFG_INIT_RAM_END-8), %a1
+	move.l #(CONFIG_SYS_INIT_RAM_ADDR+CONFIG_SYS_INIT_RAM_END-8), %a1
 	moveq	#1, %d0
 	move.l	%d0, (%a1)
 	rts
@@ -292,14 +293,14 @@ icache_disable:
 	movec	%d0, %ACR0
 	movec	%d0, %ACR1
 
-	move.l #(CFG_INIT_RAM_ADDR+CFG_INIT_RAM_END-8), %a1
+	move.l #(CONFIG_SYS_INIT_RAM_ADDR+CONFIG_SYS_INIT_RAM_END-8), %a1
 	moveq	#0, %d0
 	move.l	%d0, (%a1)
 	rts
 
 	.globl	icache_status
 icache_status:
-	move.l #(CFG_INIT_RAM_ADDR+CFG_INIT_RAM_END-8), %a1
+	move.l #(CONFIG_SYS_INIT_RAM_ADDR+CONFIG_SYS_INIT_RAM_END-8), %a1
 	move.l	(%a1), %d0
 	rts
 
@@ -312,7 +313,7 @@ icache_invalid:
 
 	.globl	dcache_enable
 dcache_enable:
-	move.l #(CFG_INIT_RAM_ADDR+CFG_INIT_RAM_END-4), %a1
+	move.l #(CONFIG_SYS_INIT_RAM_ADDR+CONFIG_SYS_INIT_RAM_END-4), %a1
 	moveq	#1, %d0
 	move.l	%d0, (%a1)
 	rts
@@ -320,14 +321,14 @@ dcache_enable:
     /* No dcache, just a dummy function */
 	.globl	dcache_disable
 dcache_disable:
-	move.l #(CFG_INIT_RAM_ADDR+CFG_INIT_RAM_END-4), %a1
+	move.l #(CONFIG_SYS_INIT_RAM_ADDR+CONFIG_SYS_INIT_RAM_END-4), %a1
 	moveq	#0, %d0
 	move.l	%d0, (%a1)
 	rts
 
 	.globl	dcache_status
 dcache_status:
-	move.l #(CFG_INIT_RAM_ADDR+CFG_INIT_RAM_END-4), %a1
+	move.l #(CONFIG_SYS_INIT_RAM_ADDR+CONFIG_SYS_INIT_RAM_END-4), %a1
 	move.l	(%a1), %d0
 	rts
 
@@ -336,6 +337,6 @@ dcache_status:
 	.globl	version_string
 version_string:
 	.ascii U_BOOT_VERSION
-	.ascii " (", __DATE__, " - ", __TIME__, ")"
+	.ascii " (", U_BOOT_DATE, " - ", U_BOOT_TIME, ")"
 	.ascii CONFIG_IDENT_STRING, "\0"
 	.align 4
diff --git a/cpu/mcf52x2/cpu.c b/cpu/mcf52x2/cpu.c
index 2af31cbb9..32d6c40da 100644
--- a/cpu/mcf52x2/cpu.c
+++ b/cpu/mcf52x2/cpu.c
@@ -32,6 +32,7 @@
 #include <watchdog.h>
 #include <command.h>
 #include <asm/immap.h>
+#include <netdev.h>
 
 #ifdef  CONFIG_M5271
 /*
@@ -65,11 +66,11 @@ int checkcpu(void)
 
 	if (cpu_model)
 		printf("CPU:   Freescale ColdFire MCF%s rev. %hu, at %s MHz\n",
-		       cpu_model, prn, strmhz(buf, CFG_CLK));
+		       cpu_model, prn, strmhz(buf, CONFIG_SYS_CLK));
 	else
 		printf("CPU:   Unknown - Freescale ColdFire MCF5271 family"
 		       " (PIN: 0x%x) rev. %hu, at %s MHz\n",
-		       pin, prn, strmhz(buf, CFG_CLK));
+		       pin, prn, strmhz(buf, CONFIG_SYS_CLK));
 
 	return 0;
 }
@@ -173,7 +174,7 @@ int watchdog_init(void)
 
 	/* set timeout and enable watchdog */
 	wdt->wdog_wrrr =
-	    ((CONFIG_WATCHDOG_TIMEOUT * CFG_HZ) / (32768 * 1000)) - 1;
+	    ((CONFIG_WATCHDOG_TIMEOUT * CONFIG_SYS_HZ) / (32768 * 1000)) - 1;
 	wdt->wdog_wcr = 0;	/* reset watchdog counter */
 
 	puts("WATCHDOG:enabled\n");
@@ -201,7 +202,7 @@ int checkcpu(void)
 	char buf[32];
 
 	printf("CPU:   Freescale Coldfire MCF5275 at %s MHz\n",
-			strmhz(buf, CFG_CLK));
+			strmhz(buf, CONFIG_SYS_CLK));
 	return 0;
 };
 
@@ -235,7 +236,7 @@ int watchdog_init(void)
 
 	/* set timeout and enable watchdog */
 	wdt->wmr =
-		((CONFIG_WATCHDOG_TIMEOUT * CFG_HZ) / (32768 * 1000)) - 1;
+		((CONFIG_WATCHDOG_TIMEOUT * CONFIG_SYS_HZ) / (32768 * 1000)) - 1;
 	wdt->wsr = 0x5555; /* reset watchdog counter */
 	wdt->wsr = 0xAAAA;
 
@@ -277,7 +278,7 @@ int checkcpu(void)
 	char buf[32];
 
 	printf("CPU:   Freescale Coldfire MCF5249 at %s MHz\n",
-	       strmhz(buf, CFG_CLK));
+	       strmhz(buf, CONFIG_SYS_CLK));
 	return 0;
 }
 
@@ -299,7 +300,7 @@ int checkcpu(void)
 
 	unsigned char resetsource = mbar_readLong(SIM_RSR);
 	printf("CPU:   Freescale Coldfire MCF5253 at %s MHz\n",
-	       strmhz(buf, CFG_CLK));
+	       strmhz(buf, CONFIG_SYS_CLK));
 
 	if ((resetsource & SIM_RSR_HRST) || (resetsource & SIM_RSR_SWTR)) {
 		printf("Reset:%s%s\n",
@@ -328,11 +329,8 @@ int do_reset(cmd_tbl_t * cmdtp, bd_t * bd, int flag, int argc, char *argv[])
  * 	int board_eth_init(bd_t *bis)
  */
 
-extern int mcffec_initialize(bd_t*);
-
 int cpu_eth_init(bd_t *bis)
 {
 	return mcffec_initialize(bis);
 }
 #endif
-
diff --git a/cpu/mcf52x2/cpu_init.c b/cpu/mcf52x2/cpu_init.c
index 68aefe915..66f9164d5 100644
--- a/cpu/mcf52x2/cpu_init.c
+++ b/cpu/mcf52x2/cpu_init.c
@@ -36,6 +36,71 @@
 #include <watchdog.h>
 #include <asm/immap.h>
 
+#if defined(CONFIG_CMD_NET)
+#include <config.h>
+#include <net.h>
+#include <asm/fec.h>
+#endif
+
+#ifndef CONFIG_M5272
+/* Only 5272 Flexbus chipselect is different from the rest */
+void init_fbcs(void)
+{
+	volatile fbcs_t *fbcs = (fbcs_t *) (MMAP_FBCS);
+
+#if (defined(CONFIG_SYS_CS0_BASE) && defined(CONFIG_SYS_CS0_MASK) \
+     && defined(CONFIG_SYS_CS0_CTRL))
+	fbcs->csar0 = CONFIG_SYS_CS0_BASE;
+	fbcs->cscr0 = CONFIG_SYS_CS0_CTRL;
+	fbcs->csmr0 = CONFIG_SYS_CS0_MASK;
+#else
+#warning "Chip Select 0 are not initialized/used"
+#endif
+#if (defined(CONFIG_SYS_CS1_BASE) && defined(CONFIG_SYS_CS1_MASK) \
+     && defined(CONFIG_SYS_CS1_CTRL))
+	fbcs->csar1 = CONFIG_SYS_CS1_BASE;
+	fbcs->cscr1 = CONFIG_SYS_CS1_CTRL;
+	fbcs->csmr1 = CONFIG_SYS_CS1_MASK;
+#endif
+#if (defined(CONFIG_SYS_CS2_BASE) && defined(CONFIG_SYS_CS2_MASK) \
+     && defined(CONFIG_SYS_CS2_CTRL))
+	fbcs->csar2 = CONFIG_SYS_CS2_BASE;
+	fbcs->cscr2 = CONFIG_SYS_CS2_CTRL;
+	fbcs->csmr2 = CONFIG_SYS_CS2_MASK;
+#endif
+#if (defined(CONFIG_SYS_CS3_BASE) && defined(CONFIG_SYS_CS3_MASK) \
+     && defined(CONFIG_SYS_CS3_CTRL))
+	fbcs->csar3 = CONFIG_SYS_CS3_BASE;
+	fbcs->cscr3 = CONFIG_SYS_CS3_CTRL;
+	fbcs->csmr3 = CONFIG_SYS_CS3_MASK;
+#endif
+#if (defined(CONFIG_SYS_CS4_BASE) && defined(CONFIG_SYS_CS4_MASK) \
+     && defined(CONFIG_SYS_CS4_CTRL))
+	fbcs->csar4 = CONFIG_SYS_CS4_BASE;
+	fbcs->cscr4 = CONFIG_SYS_CS4_CTRL;
+	fbcs->csmr4 = CONFIG_SYS_CS4_MASK;
+#endif
+#if (defined(CONFIG_SYS_CS5_BASE) && defined(CONFIG_SYS_CS5_MASK) \
+     && defined(CONFIG_SYS_CS5_CTRL))
+	fbcs->csar5 = CONFIG_SYS_CS5_BASE;
+	fbcs->cscr5 = CONFIG_SYS_CS5_CTRL;
+	fbcs->csmr5 = CONFIG_SYS_CS5_MASK;
+#endif
+#if (defined(CONFIG_SYS_CS6_BASE) && defined(CONFIG_SYS_CS6_MASK) \
+     && defined(CONFIG_SYS_CS6_CTRL))
+	fbcs->csar6 = CONFIG_SYS_CS6_BASE;
+	fbcs->cscr6 = CONFIG_SYS_CS6_CTRL;
+	fbcs->csmr6 = CONFIG_SYS_CS6_MASK;
+#endif
+#if (defined(CONFIG_SYS_CS7_BASE) && defined(CONFIG_SYS_CS7_MASK) \
+     && defined(CONFIG_SYS_CS7_CTRL))
+	fbcs->csar7 = CONFIG_SYS_CS7_BASE;
+	fbcs->cscr7 = CONFIG_SYS_CS7_CTRL;
+	fbcs->csmr7 = CONFIG_SYS_CS7_MASK;
+#endif
+}
+#endif
+
 #if defined(CONFIG_M5253)
 /*
  * Breath some life into the CPU...
@@ -68,24 +133,16 @@ void cpu_init_f(void)
 
 	/*mbar2_writeLong(MCFSIM_IDECONFIG1, 0x00000020); */ /* Enable a 1 cycle pre-drive cycle on CS1 */
 
-	/*
-	 *  Setup chip selects...
-	 */
-
-	mbar_writeShort(MCFSIM_CSAR1, CFG_CSAR1);
-	mbar_writeShort(MCFSIM_CSCR1, CFG_CSCR1);
-	mbar_writeLong(MCFSIM_CSMR1, CFG_CSMR1);
-
-	mbar_writeShort(MCFSIM_CSAR0, CFG_CSAR0);
-	mbar_writeShort(MCFSIM_CSCR0, CFG_CSCR0);
-	mbar_writeLong(MCFSIM_CSMR0, CFG_CSMR0);
+	/* FlexBus Chipselect */
+	init_fbcs();
 
 #ifdef CONFIG_FSL_I2C
-	CFG_I2C_PINMUX_REG = CFG_I2C_PINMUX_REG & CFG_I2C_PINMUX_CLR;
-	CFG_I2C_PINMUX_REG |= CFG_I2C_PINMUX_SET;
-#ifdef CFG_I2C2_OFFSET
-	CFG_I2C2_PINMUX_REG &= CFG_I2C2_PINMUX_CLR;
-	CFG_I2C2_PINMUX_REG |= CFG_I2C2_PINMUX_SET;
+	CONFIG_SYS_I2C_PINMUX_REG =
+	    CONFIG_SYS_I2C_PINMUX_REG & CONFIG_SYS_I2C_PINMUX_CLR;
+	CONFIG_SYS_I2C_PINMUX_REG |= CONFIG_SYS_I2C_PINMUX_SET;
+#ifdef CONFIG_SYS_I2C2_OFFSET
+	CONFIG_SYS_I2C2_PINMUX_REG &= CONFIG_SYS_I2C2_PINMUX_CLR;
+	CONFIG_SYS_I2C2_PINMUX_REG |= CONFIG_SYS_I2C2_PINMUX_SET;
 #endif
 #endif
 
@@ -102,7 +159,7 @@ int cpu_init_r(void)
 void uart_port_conf(void)
 {
 	/* Setup Ports: */
-	switch (CFG_UART_PORT) {
+	switch (CONFIG_SYS_UART_PORT) {
 	case 0:
 		break;
 	case 1:
@@ -121,6 +178,9 @@ void cpu_init_f(void)
 	mbar_writeShort(MCF_WTM_WCR, 0);
 #endif
 
+	/* FlexBus Chipselect */
+	init_fbcs();
+
 	/* Set clockspeed to 100MHz */
 	mbar_writeShort(MCF_FMPLL_SYNCR,
 			MCF_FMPLL_SYNCR_MFD(0) | MCF_FMPLL_SYNCR_RFD(0));
@@ -138,7 +198,7 @@ int cpu_init_r(void)
 void uart_port_conf(void)
 {
 	/* Setup Ports: */
-	switch (CFG_UART_PORT) {
+	switch (CONFIG_SYS_UART_PORT) {
 	case 0:
 		mbar_writeShort(MCF_GPIO_PAR_UART, MCF_GPIO_PAR_UART_U0TXD |
 				MCF_GPIO_PAR_UART_U0RXD);
@@ -153,6 +213,19 @@ void uart_port_conf(void)
 		break;
 	}
 }
+
+#if defined(CONFIG_CMD_NET)
+int fecpin_setclear(struct eth_device *dev, int setclear)
+{
+	if (setclear) {
+		/* Enable Ethernet pins */
+		mbar_writeByte(MCF_GPIO_PAR_FECI2C, CONFIG_SYS_FECI2C);
+	} else {
+	}
+
+	return 0;
+}
+#endif				/* CONFIG_CMD_NET */
 #endif
 
 #if defined(CONFIG_M5272)
@@ -169,59 +242,59 @@ void cpu_init_f(void)
 	 * already initialized.
 	 */
 #ifndef CONFIG_MONITOR_IS_IN_RAM
-	volatile sysctrl_t *sysctrl = (sysctrl_t *) (CFG_MBAR);
+	volatile sysctrl_t *sysctrl = (sysctrl_t *) (CONFIG_SYS_MBAR);
 	volatile gpio_t *gpio = (gpio_t *) (MMAP_GPIO);
 	volatile csctrl_t *csctrl = (csctrl_t *) (MMAP_FBCS);
 
-	sysctrl->sc_scr = CFG_SCR;
-	sysctrl->sc_spr = CFG_SPR;
+	sysctrl->sc_scr = CONFIG_SYS_SCR;
+	sysctrl->sc_spr = CONFIG_SYS_SPR;
 
 	/* Setup Ports: */
-	gpio->gpio_pacnt = CFG_PACNT;
-	gpio->gpio_paddr = CFG_PADDR;
-	gpio->gpio_padat = CFG_PADAT;
-	gpio->gpio_pbcnt = CFG_PBCNT;
-	gpio->gpio_pbddr = CFG_PBDDR;
-	gpio->gpio_pbdat = CFG_PBDAT;
-	gpio->gpio_pdcnt = CFG_PDCNT;
+	gpio->gpio_pacnt = CONFIG_SYS_PACNT;
+	gpio->gpio_paddr = CONFIG_SYS_PADDR;
+	gpio->gpio_padat = CONFIG_SYS_PADAT;
+	gpio->gpio_pbcnt = CONFIG_SYS_PBCNT;
+	gpio->gpio_pbddr = CONFIG_SYS_PBDDR;
+	gpio->gpio_pbdat = CONFIG_SYS_PBDAT;
+	gpio->gpio_pdcnt = CONFIG_SYS_PDCNT;
 
 	/* Memory Controller: */
-	csctrl->cs_br0 = CFG_BR0_PRELIM;
-	csctrl->cs_or0 = CFG_OR0_PRELIM;
+	csctrl->cs_br0 = CONFIG_SYS_BR0_PRELIM;
+	csctrl->cs_or0 = CONFIG_SYS_OR0_PRELIM;
 
-#if (defined(CFG_OR1_PRELIM) && defined(CFG_BR1_PRELIM))
-	csctrl->cs_br1 = CFG_BR1_PRELIM;
-	csctrl->cs_or1 = CFG_OR1_PRELIM;
+#if (defined(CONFIG_SYS_OR1_PRELIM) && defined(CONFIG_SYS_BR1_PRELIM))
+	csctrl->cs_br1 = CONFIG_SYS_BR1_PRELIM;
+	csctrl->cs_or1 = CONFIG_SYS_OR1_PRELIM;
 #endif
 
-#if defined(CFG_OR2_PRELIM) && defined(CFG_BR2_PRELIM)
-	csctrl->cs_br2 = CFG_BR2_PRELIM;
-	csctrl->cs_or2 = CFG_OR2_PRELIM;
+#if defined(CONFIG_SYS_OR2_PRELIM) && defined(CONFIG_SYS_BR2_PRELIM)
+	csctrl->cs_br2 = CONFIG_SYS_BR2_PRELIM;
+	csctrl->cs_or2 = CONFIG_SYS_OR2_PRELIM;
 #endif
 
-#if defined(CFG_OR3_PRELIM) && defined(CFG_BR3_PRELIM)
-	csctrl->cs_br3 = CFG_BR3_PRELIM;
-	csctrl->cs_or3 = CFG_OR3_PRELIM;
+#if defined(CONFIG_SYS_OR3_PRELIM) && defined(CONFIG_SYS_BR3_PRELIM)
+	csctrl->cs_br3 = CONFIG_SYS_BR3_PRELIM;
+	csctrl->cs_or3 = CONFIG_SYS_OR3_PRELIM;
 #endif
 
-#if defined(CFG_OR4_PRELIM) && defined(CFG_BR4_PRELIM)
-	csctrl->cs_br4 = CFG_BR4_PRELIM;
-	csctrl->cs_or4 = CFG_OR4_PRELIM;
+#if defined(CONFIG_SYS_OR4_PRELIM) && defined(CONFIG_SYS_BR4_PRELIM)
+	csctrl->cs_br4 = CONFIG_SYS_BR4_PRELIM;
+	csctrl->cs_or4 = CONFIG_SYS_OR4_PRELIM;
 #endif
 
-#if defined(CFG_OR5_PRELIM) && defined(CFG_BR5_PRELIM)
-	csctrl->cs_br5 = CFG_BR5_PRELIM;
-	csctrl->cs_or5 = CFG_OR5_PRELIM;
+#if defined(CONFIG_SYS_OR5_PRELIM) && defined(CONFIG_SYS_BR5_PRELIM)
+	csctrl->cs_br5 = CONFIG_SYS_BR5_PRELIM;
+	csctrl->cs_or5 = CONFIG_SYS_OR5_PRELIM;
 #endif
 
-#if defined(CFG_OR6_PRELIM) && defined(CFG_BR6_PRELIM)
-	csctrl->cs_br6 = CFG_BR6_PRELIM;
-	csctrl->cs_or6 = CFG_OR6_PRELIM;
+#if defined(CONFIG_SYS_OR6_PRELIM) && defined(CONFIG_SYS_BR6_PRELIM)
+	csctrl->cs_br6 = CONFIG_SYS_BR6_PRELIM;
+	csctrl->cs_or6 = CONFIG_SYS_OR6_PRELIM;
 #endif
 
-#if defined(CFG_OR7_PRELIM) && defined(CFG_BR7_PRELIM)
-	csctrl->cs_br7 = CFG_BR7_PRELIM;
-	csctrl->cs_or7 = CFG_OR7_PRELIM;
+#if defined(CONFIG_SYS_OR7_PRELIM) && defined(CONFIG_SYS_BR7_PRELIM)
+	csctrl->cs_br7 = CONFIG_SYS_BR7_PRELIM;
+	csctrl->cs_or7 = CONFIG_SYS_OR7_PRELIM;
 #endif
 
 #endif				/* #ifndef CONFIG_MONITOR_IS_IN_RAM */
@@ -244,7 +317,7 @@ void uart_port_conf(void)
 	volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO;
 
 	/* Setup Ports: */
-	switch (CFG_UART_PORT) {
+	switch (CONFIG_SYS_UART_PORT) {
 	case 0:
 		gpio->gpio_pbcnt &= ~(GPIO_PBCNT_PB0MSK | GPIO_PBCNT_PB1MSK);
 		gpio->gpio_pbcnt |= (GPIO_PBCNT_URT0_TXD | GPIO_PBCNT_URT0_RXD);
@@ -255,6 +328,22 @@ void uart_port_conf(void)
 		break;
 	}
 }
+
+#if defined(CONFIG_CMD_NET)
+int fecpin_setclear(struct eth_device *dev, int setclear)
+{
+	volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO;
+
+	if (setclear) {
+		gpio->gpio_pbcnt |= GPIO_PBCNT_E_MDC | GPIO_PBCNT_E_RXER |
+				    GPIO_PBCNT_E_RXD1 | GPIO_PBCNT_E_RXD2 |
+				    GPIO_PBCNT_E_RXD3 | GPIO_PBCNT_E_TXD1 |
+				    GPIO_PBCNT_E_TXD2 | GPIO_PBCNT_E_TXD3;
+	} else {
+	}
+	return 0;
+}
+#endif				/* CONFIG_CMD_NET */
 #endif				/* #if defined(CONFIG_M5272) */
 
 #if defined(CONFIG_M5275)
@@ -268,71 +357,25 @@ void uart_port_conf(void)
  */
 void cpu_init_f(void)
 {
-	/* if we come from RAM we assume the CPU is
+	/*
+	 * if we come from RAM we assume the CPU is
 	 * already initialized.
 	 */
 
 #ifndef CONFIG_MONITOR_IS_IN_RAM
-	volatile wdog_t *wdog_reg = (wdog_t *)(MMAP_WDOG);
-	volatile gpio_t *gpio_reg = (gpio_t *)(MMAP_GPIO);
-	volatile csctrl_t *csctrl_reg = (csctrl_t *)(MMAP_FBCS);
+	volatile wdog_t *wdog_reg = (wdog_t *) (MMAP_WDOG);
+	volatile gpio_t *gpio_reg = (gpio_t *) (MMAP_GPIO);
 
 	/* Kill watchdog so we can initialize the PLL */
 	wdog_reg->wcr = 0;
 
-	/* Memory Controller: */
-	/* Flash */
-	csctrl_reg->ar0 = CFG_AR0_PRELIM;
-	csctrl_reg->cr0 = CFG_CR0_PRELIM;
-	csctrl_reg->mr0 = CFG_MR0_PRELIM;
-
-#if (defined(CFG_AR1_PRELIM) && defined(CFG_CR1_PRELIM) && defined(CFG_MR1_PRELIM))
-	csctrl_reg->ar1 = CFG_AR1_PRELIM;
-	csctrl_reg->cr1 = CFG_CR1_PRELIM;
-	csctrl_reg->mr1 = CFG_MR1_PRELIM;
-#endif
-
-#if (defined(CFG_AR2_PRELIM) && defined(CFG_CR2_PRELIM) && defined(CFG_MR2_PRELIM))
-	csctrl_reg->ar2 = CFG_AR2_PRELIM;
-	csctrl_reg->cr2 = CFG_CR2_PRELIM;
-	csctrl_reg->mr2 = CFG_MR2_PRELIM;
-#endif
-
-#if (defined(CFG_AR3_PRELIM) && defined(CFG_CR3_PRELIM) && defined(CFG_MR3_PRELIM))
-	csctrl_reg->ar3 = CFG_AR3_PRELIM;
-	csctrl_reg->cr3 = CFG_CR3_PRELIM;
-	csctrl_reg->mr3 = CFG_MR3_PRELIM;
-#endif
-
-#if (defined(CFG_AR4_PRELIM) && defined(CFG_CR4_PRELIM) && defined(CFG_MR4_PRELIM))
-	csctrl_reg->ar4 = CFG_AR4_PRELIM;
-	csctrl_reg->cr4 = CFG_CR4_PRELIM;
-	csctrl_reg->mr4 = CFG_MR4_PRELIM;
-#endif
-
-#if (defined(CFG_AR5_PRELIM) && defined(CFG_CR5_PRELIM) && defined(CFG_MR5_PRELIM))
-	csctrl_reg->ar5 = CFG_AR5_PRELIM;
-	csctrl_reg->cr5 = CFG_CR5_PRELIM;
-	csctrl_reg->mr5 = CFG_MR5_PRELIM;
-#endif
-
-#if (defined(CFG_AR6_PRELIM) && defined(CFG_CR6_PRELIM) && defined(CFG_MR6_PRELIM))
-	csctrl_reg->ar6 = CFG_AR6_PRELIM;
-	csctrl_reg->cr6 = CFG_CR6_PRELIM;
-	csctrl_reg->mr6 = CFG_MR6_PRELIM;
-#endif
-
-#if (defined(CFG_AR7_PRELIM) && defined(CFG_CR7_PRELIM) && defined(CFG_MR7_PRELIM))
-	csctrl_reg->ar7 = CFG_AR7_PRELIM;
-	csctrl_reg->cr7 = CFG_CR7_PRELIM;
-	csctrl_reg->mr7 = CFG_MR7_PRELIM;
-#endif
-
+	/* FlexBus Chipselect */
+	init_fbcs();
 #endif				/* #ifndef CONFIG_MONITOR_IS_IN_RAM */
 
 #ifdef CONFIG_FSL_I2C
-	CFG_I2C_PINMUX_REG &= CFG_I2C_PINMUX_CLR;
-	CFG_I2C_PINMUX_REG |= CFG_I2C_PINMUX_SET;
+	CONFIG_SYS_I2C_PINMUX_REG &= CONFIG_SYS_I2C_PINMUX_CLR;
+	CONFIG_SYS_I2C_PINMUX_REG |= CONFIG_SYS_I2C_PINMUX_SET;
 #endif
 
 	/* enable instruction cache now */
@@ -349,10 +392,10 @@ int cpu_init_r(void)
 
 void uart_port_conf(void)
 {
-	volatile gpio_t *gpio = (gpio_t *)MMAP_GPIO;
+	volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO;
 
 	/* Setup Ports: */
-	switch (CFG_UART_PORT) {
+	switch (CONFIG_SYS_UART_PORT) {
 	case 0:
 		gpio->par_uart |= UART0_ENABLE_MASK;
 		break;
@@ -364,6 +407,35 @@ void uart_port_conf(void)
 		break;
 	}
 }
+
+#if defined(CONFIG_CMD_NET)
+int fecpin_setclear(struct eth_device *dev, int setclear)
+{
+	struct fec_info_s *info = (struct fec_info_s *) dev->priv;
+	volatile gpio_t *gpio = (gpio_t *)MMAP_GPIO;
+
+	if (setclear) {
+		/* Enable Ethernet pins */
+		if (info->iobase == CONFIG_SYS_FEC0_IOBASE) {
+			gpio->par_feci2c |= 0x0F00;
+			gpio->par_fec0hl |= 0xC0;
+		} else {
+			gpio->par_feci2c |= 0x00A0;
+			gpio->par_fec1hl |= 0xC0;
+		}
+	} else {
+		if (info->iobase == CONFIG_SYS_FEC0_IOBASE) {
+			gpio->par_feci2c &= ~0x0F00;
+			gpio->par_fec0hl &= ~0xC0;
+		} else {
+			gpio->par_feci2c &= ~0x00A0;
+			gpio->par_fec1hl &= ~0xC0;
+		}
+	}
+
+	return 0;
+}
+#endif				/* CONFIG_CMD_NET */
 #endif				/* #if defined(CONFIG_M5275) */
 
 #if defined(CONFIG_M5282)
@@ -384,160 +456,50 @@ void cpu_init_f(void)
 #ifndef CONFIG_MONITOR_IS_IN_RAM
 	/* Set speed /PLL */
 	MCFCLOCK_SYNCR =
-	    MCFCLOCK_SYNCR_MFD(CFG_MFD) | MCFCLOCK_SYNCR_RFD(CFG_RFD);
+	    MCFCLOCK_SYNCR_MFD(CONFIG_SYS_MFD) |
+	    MCFCLOCK_SYNCR_RFD(CONFIG_SYS_RFD);
 	while (!(MCFCLOCK_SYNSR & MCFCLOCK_SYNSR_LOCK)) ;
 
 	MCFGPIO_PBCDPAR = 0xc0;
 
 	/* Set up the GPIO ports */
-#ifdef CFG_PEPAR
-	MCFGPIO_PEPAR = CFG_PEPAR;
-#endif
-#ifdef	CFG_PFPAR
-	MCFGPIO_PFPAR = CFG_PFPAR;
-#endif
-#ifdef CFG_PJPAR
-	MCFGPIO_PJPAR = CFG_PJPAR;
+#ifdef CONFIG_SYS_PEPAR
+	MCFGPIO_PEPAR = CONFIG_SYS_PEPAR;
 #endif
-#ifdef CFG_PSDPAR
-	MCFGPIO_PSDPAR = CFG_PSDPAR;
+#ifdef	CONFIG_SYS_PFPAR
+	MCFGPIO_PFPAR = CONFIG_SYS_PFPAR;
 #endif
-#ifdef CFG_PASPAR
-	MCFGPIO_PASPAR = CFG_PASPAR;
+#ifdef CONFIG_SYS_PJPAR
+	MCFGPIO_PJPAR = CONFIG_SYS_PJPAR;
 #endif
-#ifdef CFG_PEHLPAR
-	MCFGPIO_PEHLPAR = CFG_PEHLPAR;
+#ifdef CONFIG_SYS_PSDPAR
+	MCFGPIO_PSDPAR = CONFIG_SYS_PSDPAR;
 #endif
-#ifdef CFG_PQSPAR
-	MCFGPIO_PQSPAR = CFG_PQSPAR;
+#ifdef CONFIG_SYS_PASPAR
+	MCFGPIO_PASPAR = CONFIG_SYS_PASPAR;
 #endif
-#ifdef CFG_PTCPAR
-	MCFGPIO_PTCPAR = CFG_PTCPAR;
+#ifdef CONFIG_SYS_PEHLPAR
+	MCFGPIO_PEHLPAR = CONFIG_SYS_PEHLPAR;
 #endif
-#ifdef CFG_PTDPAR
-	MCFGPIO_PTDPAR = CFG_PTDPAR;
-#endif
-#ifdef CFG_PUAPAR
-	MCFGPIO_PUAPAR = CFG_PUAPAR;
-#endif
-
-#ifdef CFG_DDRUA
-	MCFGPIO_DDRUA = CFG_DDRUA;
-#endif
-
-	/* This is probably a bad place to setup chip selects, but everyone
-	   else is doing it! */
-
-#if defined(CFG_CS0_BASE) & defined(CFG_CS0_SIZE) & \
-    defined(CFG_CS0_WIDTH) & defined(CFG_CS0_WS)
-
-	MCFCSM_CSAR0 = (CFG_CS0_BASE >> 16) & 0xFFFF;
-
-#if (CFG_CS0_WIDTH == 8)
-#define	 CFG_CS0_PS  MCFCSM_CSCR_PS_8
-#elif (CFG_CS0_WIDTH == 16)
-#define	 CFG_CS0_PS  MCFCSM_CSCR_PS_16
-#elif (CFG_CS0_WIDTH == 32)
-#define	 CFG_CS0_PS  MCFCSM_CSCR_PS_32
-#else
-#error	"CFG_CS0_WIDTH: Fault - wrong bus with for CS0"
+#ifdef CONFIG_SYS_PQSPAR
+	MCFGPIO_PQSPAR = CONFIG_SYS_PQSPAR;
 #endif
-	MCFCSM_CSCR0 = MCFCSM_CSCR_WS(CFG_CS0_WS)
-	    | CFG_CS0_PS | MCFCSM_CSCR_AA;
-
-#if (CFG_CS0_RO != 0)
-	MCFCSM_CSMR0 = MCFCSM_CSMR_BAM(CFG_CS0_SIZE - 1)
-	    | MCFCSM_CSMR_WP | MCFCSM_CSMR_V;
-#else
-	MCFCSM_CSMR0 = MCFCSM_CSMR_BAM(CFG_CS0_SIZE - 1) | MCFCSM_CSMR_V;
+#ifdef CONFIG_SYS_PTCPAR
+	MCFGPIO_PTCPAR = CONFIG_SYS_PTCPAR;
 #endif
-#else
-#warning "Chip Select 0 are not initialized/used"
+#ifdef CONFIG_SYS_PTDPAR
+	MCFGPIO_PTDPAR = CONFIG_SYS_PTDPAR;
 #endif
-
-#if defined(CFG_CS1_BASE) & defined(CFG_CS1_SIZE) & \
-    defined(CFG_CS1_WIDTH) & defined(CFG_CS1_WS)
-
-	MCFCSM_CSAR1 = (CFG_CS1_BASE >> 16) & 0xFFFF;
-
-#if (CFG_CS1_WIDTH == 8)
-#define	 CFG_CS1_PS  MCFCSM_CSCR_PS_8
-#elif (CFG_CS1_WIDTH == 16)
-#define	 CFG_CS1_PS  MCFCSM_CSCR_PS_16
-#elif (CFG_CS1_WIDTH == 32)
-#define	 CFG_CS1_PS  MCFCSM_CSCR_PS_32
-#else
-#error	"CFG_CS1_WIDTH: Fault - wrong bus with for CS1"
+#ifdef CONFIG_SYS_PUAPAR
+	MCFGPIO_PUAPAR = CONFIG_SYS_PUAPAR;
 #endif
-	MCFCSM_CSCR1 = MCFCSM_CSCR_WS(CFG_CS1_WS)
-	    | CFG_CS1_PS | MCFCSM_CSCR_AA;
 
-#if (CFG_CS1_RO != 0)
-	MCFCSM_CSMR1 = MCFCSM_CSMR_BAM(CFG_CS1_SIZE - 1)
-	    | MCFCSM_CSMR_WP | MCFCSM_CSMR_V;
-#else
-	MCFCSM_CSMR1 = MCFCSM_CSMR_BAM(CFG_CS1_SIZE - 1)
-	    | MCFCSM_CSMR_V;
-#endif
-#else
-#warning "Chip Select 1 are not initialized/used"
+#ifdef CONFIG_SYS_DDRUA
+	MCFGPIO_DDRUA = CONFIG_SYS_DDRUA;
 #endif
 
-#if defined(CFG_CS2_BASE) & defined(CFG_CS2_SIZE) & \
-    defined(CFG_CS2_WIDTH) & defined(CFG_CS2_WS)
-
-	MCFCSM_CSAR2 = (CFG_CS2_BASE >> 16) & 0xFFFF;
-
-#if (CFG_CS2_WIDTH == 8)
-#define	 CFG_CS2_PS  MCFCSM_CSCR_PS_8
-#elif (CFG_CS2_WIDTH == 16)
-#define	 CFG_CS2_PS  MCFCSM_CSCR_PS_16
-#elif (CFG_CS2_WIDTH == 32)
-#define	 CFG_CS2_PS  MCFCSM_CSCR_PS_32
-#else
-#error	"CFG_CS2_WIDTH: Fault - wrong bus with for CS2"
-#endif
-	MCFCSM_CSCR2 = MCFCSM_CSCR_WS(CFG_CS2_WS)
-	    | CFG_CS2_PS | MCFCSM_CSCR_AA;
-
-#if (CFG_CS2_RO != 0)
-	MCFCSM_CSMR2 = MCFCSM_CSMR_BAM(CFG_CS2_SIZE - 1)
-	    | MCFCSM_CSMR_WP | MCFCSM_CSMR_V;
-#else
-	MCFCSM_CSMR2 = MCFCSM_CSMR_BAM(CFG_CS2_SIZE - 1)
-	    | MCFCSM_CSMR_V;
-#endif
-#else
-#warning "Chip Select 2 are not initialized/used"
-#endif
-
-#if defined(CFG_CS3_BASE) & defined(CFG_CS3_SIZE) & \
-    defined(CFG_CS3_WIDTH) & defined(CFG_CS3_WS)
-
-	MCFCSM_CSAR3 = (CFG_CS3_BASE >> 16) & 0xFFFF;
-
-#if (CFG_CS3_WIDTH == 8)
-#define	 CFG_CS3_PS  MCFCSM_CSCR_PS_8
-#elif (CFG_CS3_WIDTH == 16)
-#define	 CFG_CS3_PS  MCFCSM_CSCR_PS_16
-#elif (CFG_CS3_WIDTH == 32)
-#define	 CFG_CS3_PS  MCFCSM_CSCR_PS_32
-#else
-#error	"CFG_CS3_WIDTH: Fault - wrong bus with for CS1"
-#endif
-	MCFCSM_CSCR3 = MCFCSM_CSCR_WS(CFG_CS3_WS)
-	    | CFG_CS3_PS | MCFCSM_CSCR_AA;
-
-#if (CFG_CS3_RO != 0)
-	MCFCSM_CSMR3 = MCFCSM_CSMR_BAM(CFG_CS3_SIZE - 1)
-	    | MCFCSM_CSMR_WP | MCFCSM_CSMR_V;
-#else
-	MCFCSM_CSMR3 = MCFCSM_CSMR_BAM(CFG_CS3_SIZE - 1)
-	    | MCFCSM_CSMR_V;
-#endif
-#else
-#warning "Chip Select 3 are not initialized/used"
-#endif
+	/* FlexBus Chipselect */
+	init_fbcs();
 
 #endif				/* CONFIG_MONITOR_IS_IN_RAM */
 
@@ -556,7 +518,7 @@ int cpu_init_r(void)
 void uart_port_conf(void)
 {
 	/* Setup Ports: */
-	switch (CFG_UART_PORT) {
+	switch (CONFIG_SYS_UART_PORT) {
 	case 0:
 		MCFGPIO_PUAPAR &= 0xFc;
 		MCFGPIO_PUAPAR |= 0x03;
@@ -571,6 +533,20 @@ void uart_port_conf(void)
 		break;
 	}
 }
+
+#if defined(CONFIG_CMD_NET)
+int fecpin_setclear(struct eth_device *dev, int setclear)
+{
+	if (setclear) {
+		MCFGPIO_PASPAR |= 0x0F00;
+		MCFGPIO_PEHLPAR = CONFIG_SYS_PEHLPAR;
+	} else {
+		MCFGPIO_PASPAR &= 0xF0FF;
+		MCFGPIO_PEHLPAR &= ~CONFIG_SYS_PEHLPAR;
+	}
+	return 0;
+}
+#endif			/* CONFIG_CMD_NET */
 #endif
 
 #if defined(CONFIG_M5249)
@@ -589,12 +565,12 @@ void cpu_init_f(void)
 	 *        which is their primary function.
 	 *        ~Jeremy
 	 */
-	mbar2_writeLong(MCFSIM_GPIO_FUNC, CFG_GPIO_FUNC);
-	mbar2_writeLong(MCFSIM_GPIO1_FUNC, CFG_GPIO1_FUNC);
-	mbar2_writeLong(MCFSIM_GPIO_EN, CFG_GPIO_EN);
-	mbar2_writeLong(MCFSIM_GPIO1_EN, CFG_GPIO1_EN);
-	mbar2_writeLong(MCFSIM_GPIO_OUT, CFG_GPIO_OUT);
-	mbar2_writeLong(MCFSIM_GPIO1_OUT, CFG_GPIO1_OUT);
+	mbar2_writeLong(MCFSIM_GPIO_FUNC, CONFIG_SYS_GPIO_FUNC);
+	mbar2_writeLong(MCFSIM_GPIO1_FUNC, CONFIG_SYS_GPIO1_FUNC);
+	mbar2_writeLong(MCFSIM_GPIO_EN, CONFIG_SYS_GPIO_EN);
+	mbar2_writeLong(MCFSIM_GPIO1_EN, CONFIG_SYS_GPIO1_EN);
+	mbar2_writeLong(MCFSIM_GPIO_OUT, CONFIG_SYS_GPIO_OUT);
+	mbar2_writeLong(MCFSIM_GPIO1_OUT, CONFIG_SYS_GPIO1_OUT);
 
 	/*
 	 *  dBug Compliance:
@@ -632,17 +608,8 @@ void cpu_init_f(void)
 	mbar2_writeLong(MCFSIM_IDECONFIG1, 0x00000020);
 	mbar2_writeLong(MCFSIM_IDECONFIG2, 0x00000000);
 
-	/*
-	 *  Setup chip selects...
-	 */
-
-	mbar_writeShort(MCFSIM_CSAR1, CFG_CSAR1);
-	mbar_writeShort(MCFSIM_CSCR1, CFG_CSCR1);
-	mbar_writeLong(MCFSIM_CSMR1, CFG_CSMR1);
-
-	mbar_writeShort(MCFSIM_CSAR0, CFG_CSAR0);
-	mbar_writeShort(MCFSIM_CSCR0, CFG_CSCR0);
-	mbar_writeLong(MCFSIM_CSMR0, CFG_CSMR0);
+	/* FlexBus Chipselect */
+	init_fbcs();
 
 	/* enable instruction cache now */
 	icache_enable();
@@ -659,7 +626,7 @@ int cpu_init_r(void)
 void uart_port_conf(void)
 {
 	/* Setup Ports: */
-	switch (CFG_UART_PORT) {
+	switch (CONFIG_SYS_UART_PORT) {
 	case 0:
 		break;
 	case 1:
diff --git a/cpu/mcf52x2/interrupts.c b/cpu/mcf52x2/interrupts.c
index b8fb7bb0e..0181e4b41 100644
--- a/cpu/mcf52x2/interrupts.c
+++ b/cpu/mcf52x2/interrupts.c
@@ -51,10 +51,10 @@ int interrupt_init(void)
 #if defined(CONFIG_MCFTMR)
 void dtimer_intr_setup(void)
 {
-	volatile intctrl_t *intp = (intctrl_t *) (CFG_INTR_BASE);
+	volatile intctrl_t *intp = (intctrl_t *) (CONFIG_SYS_INTR_BASE);
 
 	intp->int_icr1 &= ~INT_ICR1_TMR3MASK;
-	intp->int_icr1 |= CFG_TMRINTR_PRI;
+	intp->int_icr1 |= CONFIG_SYS_TMRINTR_PRI;
 }
 #endif				/* CONFIG_MCFTMR */
 #endif				/* CONFIG_M5272 */
@@ -62,7 +62,7 @@ void dtimer_intr_setup(void)
 #if defined(CONFIG_M5282) || defined(CONFIG_M5271) || defined(CONFIG_M5275)
 int interrupt_init(void)
 {
-	volatile int0_t *intp = (int0_t *) (CFG_INTR_BASE);
+	volatile int0_t *intp = (int0_t *) (CONFIG_SYS_INTR_BASE);
 
 	/* Make sure all interrupts are disabled */
 	intp->imrl0 |= 0x1;
@@ -74,11 +74,11 @@ int interrupt_init(void)
 #if defined(CONFIG_MCFTMR)
 void dtimer_intr_setup(void)
 {
-	volatile int0_t *intp = (int0_t *) (CFG_INTR_BASE);
+	volatile int0_t *intp = (int0_t *) (CONFIG_SYS_INTR_BASE);
 
-	intp->icr0[CFG_TMRINTR_NO] = CFG_TMRINTR_PRI;
+	intp->icr0[CONFIG_SYS_TMRINTR_NO] = CONFIG_SYS_TMRINTR_PRI;
 	intp->imrl0 &= 0xFFFFFFFE;
-	intp->imrl0 &= ~CFG_TMRINTR_MASK;
+	intp->imrl0 &= ~CONFIG_SYS_TMRINTR_MASK;
 }
 #endif				/* CONFIG_MCFTMR */
 #endif				/* CONFIG_M5282 | CONFIG_M5271 | CONFIG_M5275 */
@@ -95,7 +95,7 @@ int interrupt_init(void)
 void dtimer_intr_setup(void)
 {
 	mbar_writeLong(MCFSIM_IMR, mbar_readLong(MCFSIM_IMR) & ~0x00000400);
-	mbar_writeByte(MCFSIM_TIMER2ICR, CFG_TMRINTR_PRI);
+	mbar_writeByte(MCFSIM_TIMER2ICR, CONFIG_SYS_TMRINTR_PRI);
 }
 #endif				/* CONFIG_MCFTMR */
 #endif				/* CONFIG_M5249 || CONFIG_M5253 */
diff --git a/cpu/mcf52x2/speed.c b/cpu/mcf52x2/speed.c
index 4cb8f9300..fe51fb480 100644
--- a/cpu/mcf52x2/speed.c
+++ b/cpu/mcf52x2/speed.c
@@ -39,11 +39,11 @@ int get_clocks (void)
 	volatile unsigned long cpll = mbar2_readLong(MCFSIM_PLLCR);
 	unsigned long pllcr;
 
-#ifndef CFG_PLL_BYPASS
+#ifndef CONFIG_SYS_PLL_BYPASS
 
 #ifdef CONFIG_M5249
 	/* Setup the PLL to run at the specified speed */
-#ifdef CFG_FAST_CLK
+#ifdef CONFIG_SYS_FAST_CLK
 	pllcr = 0x925a3100;	/* ~140MHz clock (PLL bypass = 0) */
 #else
 	pllcr = 0x135a4140;	/* ~72MHz clock (PLL bypass = 0) */
@@ -51,7 +51,7 @@ int get_clocks (void)
 #endif				/* CONFIG_M5249 */
 
 #ifdef CONFIG_M5253
-	pllcr = CFG_PLLCR;
+	pllcr = CONFIG_SYS_PLLCR;
 #endif				/* CONFIG_M5253 */
 
 	cpll = cpll & 0xfffffffe;	/* Set PLL bypass mode = 0 (PSTCLK = crystal) */
@@ -60,7 +60,7 @@ int get_clocks (void)
 	pllcr ^= 0x00000001;	/* Set pll bypass to 1 */
 	mbar2_writeLong(MCFSIM_PLLCR, pllcr);	/* Start locking (pll bypass = 1) */
 	udelay(0x20);		/* Wait for a lock ... */
-#endif				/* #ifndef CFG_PLL_BYPASS */
+#endif				/* #ifndef CONFIG_SYS_PLL_BYPASS */
 
 #endif				/* CONFIG_M5249 || CONFIG_M5253 */
 
@@ -76,7 +76,7 @@ int get_clocks (void)
 		;
 #endif
 
-	gd->cpu_clk = CFG_CLK;
+	gd->cpu_clk = CONFIG_SYS_CLK;
 #if defined(CONFIG_M5249) || defined(CONFIG_M5253) || defined(CONFIG_M5275)
 	gd->bus_clk = gd->cpu_clk / 2;
 #else
@@ -85,7 +85,7 @@ int get_clocks (void)
 
 #ifdef CONFIG_FSL_I2C
 	gd->i2c1_clk = gd->bus_clk;
-#ifdef CFG_I2C2_OFFSET
+#ifdef CONFIG_SYS_I2C2_OFFSET
 	gd->i2c2_clk = gd->bus_clk;
 #endif
 #endif
diff --git a/cpu/mcf52x2/start.S b/cpu/mcf52x2/start.S
index 2e8ecfbe6..ba6b8843e 100644
--- a/cpu/mcf52x2/start.S
+++ b/cpu/mcf52x2/start.S
@@ -22,6 +22,7 @@
  */
 
 #include <config.h>
+#include <timestamp.h>
 #include "version.h"
 
 #ifndef	 CONFIG_IDENT_STRING
@@ -56,7 +57,7 @@
 _vectors:
 
 .long	0x00000000		/* Flash offset is 0 until we setup CS0 */
-#if defined(CONFIG_M5282) && (TEXT_BASE == CFG_INT_FLASH_BASE)
+#if defined(CONFIG_M5282) && (TEXT_BASE == CONFIG_SYS_INT_FLASH_BASE)
 .long	_start - TEXT_BASE
 #else
 .long	_START
@@ -103,9 +104,9 @@ _vectors:
 	.text
 
 
-#if defined(CFG_INT_FLASH_BASE) && \
+#if defined(CONFIG_SYS_INT_FLASH_BASE) && \
     (defined(CONFIG_M5282) || defined(CONFIG_M5281))
-	#if (TEXT_BASE == CFG_INT_FLASH_BASE)
+	#if (TEXT_BASE == CONFIG_SYS_INT_FLASH_BASE)
 		.long	0x55AA55AA,0xAA55AA55 /* CFM Backdoorkey */
 		.long	0xFFFFFFFF /* all sectors protected */
 		.long	0x00000000 /* supervisor/User restriction */
@@ -120,44 +121,44 @@ _start:
 	move.w #0x2700,%sr
 
 #if defined(CONFIG_M5272) || defined(CONFIG_M5249) || defined(CONFIG_M5253)
-	move.l	#(CFG_MBAR + 1), %d0		/* set MBAR address + valid flag */
+	move.l	#(CONFIG_SYS_MBAR + 1), %d0		/* set MBAR address + valid flag */
 	move.c	%d0, %MBAR
 
 	/*** The 5249 has MBAR2 as well ***/
-#ifdef CFG_MBAR2
-	move.l	#(CFG_MBAR2 + 1), %d0	        /* Get MBAR2 address */
+#ifdef CONFIG_SYS_MBAR2
+	move.l	#(CONFIG_SYS_MBAR2 + 1), %d0	        /* Get MBAR2 address */
 	movec	%d0, #0xc0e		        /* Set MBAR2 */
 #endif
 
-	move.l	#(CFG_INIT_RAM_ADDR + 1), %d0
+	move.l	#(CONFIG_SYS_INIT_RAM_ADDR + 1), %d0
 	movec	%d0, %RAMBAR0
 #endif /* CONFIG_M5272 || CONFIG_M5249 || CONFIG_M5253 */
 
 #if defined(CONFIG_M5282) || defined(CONFIG_M5271)
 	/* Initialize IPSBAR */
-	move.l	#(CFG_MBAR + 1), %d0		/* set IPSBAR address + valid flag */
+	move.l	#(CONFIG_SYS_MBAR + 1), %d0		/* set IPSBAR address + valid flag */
 	move.l	%d0, 0x40000000
 
 	/* Initialize RAMBAR1: locate SRAM and validate it */
-	move.l	#(CFG_INIT_RAM_ADDR + 0x21), %d0
+	move.l	#(CONFIG_SYS_INIT_RAM_ADDR + 0x21), %d0
 	movec	%d0, %RAMBAR1
 
 #if defined(CONFIG_M5282)
-#if (TEXT_BASE == CFG_INT_FLASH_BASE)
+#if (TEXT_BASE == CONFIG_SYS_INT_FLASH_BASE)
 	/* Setup code in SRAM to initialize FLASHBAR, if start from internal Flash */
 
-	move.l #(_flashbar_setup-CFG_INT_FLASH_BASE), %a0
-	move.l #(_flashbar_setup_end-CFG_INT_FLASH_BASE), %a1
-	move.l #(CFG_INIT_RAM_ADDR), %a2
+	move.l #(_flashbar_setup-CONFIG_SYS_INT_FLASH_BASE), %a0
+	move.l #(_flashbar_setup_end-CONFIG_SYS_INT_FLASH_BASE), %a1
+	move.l #(CONFIG_SYS_INIT_RAM_ADDR), %a2
 _copy_flash:
 	move.l (%a0)+, (%a2)+
 	cmp.l %a0, %a1
 	bgt.s _copy_flash
-	jmp CFG_INIT_RAM_ADDR
+	jmp CONFIG_SYS_INIT_RAM_ADDR
 
 _flashbar_setup:
 	/* Initialize FLASHBAR: locate internal Flash and validate it */
-	move.l	#(CFG_INT_FLASH_BASE + CFG_INT_FLASH_ENABLE), %d0
+	move.l	#(CONFIG_SYS_INT_FLASH_BASE + CONFIG_SYS_INT_FLASH_ENABLE), %d0
 	movec	%d0, %FLASHBAR
 	jmp _after_flashbar_copy.L	/* Force jump to absolute address */
 _flashbar_setup_end:
@@ -165,9 +166,9 @@ _flashbar_setup_end:
 _after_flashbar_copy:
 #else
 	/* Setup code to initialize FLASHBAR, if start from external Memory */
-	move.l	#(CFG_INT_FLASH_BASE + CFG_INT_FLASH_ENABLE), %d0
+	move.l	#(CONFIG_SYS_INT_FLASH_BASE + CONFIG_SYS_INT_FLASH_ENABLE), %d0
 	movec	%d0, %FLASHBAR
-#endif /* (TEXT_BASE == CFG_INT_FLASH_BASE) */
+#endif /* (TEXT_BASE == CONFIG_SYS_INT_FLASH_BASE) */
 
 #endif
 #endif
@@ -175,22 +176,22 @@ _after_flashbar_copy:
 	 * therefore no VBR to set
 	 */
 #if !defined(CONFIG_MONITOR_IS_IN_RAM)
-#if defined(CONFIG_M5282) && (TEXT_BASE == CFG_INT_FLASH_BASE)
-	move.l	#CFG_INT_FLASH_BASE, %d0
+#if defined(CONFIG_M5282) && (TEXT_BASE == CONFIG_SYS_INT_FLASH_BASE)
+	move.l	#CONFIG_SYS_INT_FLASH_BASE, %d0
 #else
-	move.l	#CFG_FLASH_BASE, %d0
+	move.l	#CONFIG_SYS_FLASH_BASE, %d0
 #endif
 	movec	%d0, %VBR
 #endif
 
 #ifdef CONFIG_M5275
 	/* Initialize IPSBAR */
-	move.l	#(CFG_MBAR + 1), %d0		/* set IPSBAR address + valid flag */
+	move.l	#(CONFIG_SYS_MBAR + 1), %d0		/* set IPSBAR address + valid flag */
 	move.l	%d0, 0x40000000
 /*	movec	%d0, %MBAR */
 
 	/* Initialize RAMBAR: locate SRAM and validate it */
-	move.l	#(CFG_INIT_RAM_ADDR + 0x21), %d0
+	move.l	#(CONFIG_SYS_INIT_RAM_ADDR + 0x21), %d0
 	movec	%d0, %RAMBAR1
 #endif
 
@@ -204,7 +205,7 @@ _after_flashbar_copy:
 #endif
 
 	/* set stackpointer to end of internal ram to get some stackspace for the first c-code */
-	move.l	#(CFG_INIT_RAM_ADDR + CFG_INIT_SP_OFFSET), %sp
+	move.l	#(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET), %sp
 	clr.l %sp@-
 
 	move.l #__got_start, %a5		/* put relocation table address to a5 */
@@ -235,7 +236,7 @@ relocate_code:
 	move.l 12(%a6), %d0		/* Save copy of Global Data pointer */
 	move.l 16(%a6), %a0		/* Save copy of Destination Address */
 
-	move.l #CFG_MONITOR_BASE, %a1
+	move.l #CONFIG_SYS_MONITOR_BASE, %a1
 	move.l #__init_end, %a2
 	move.l %a0, %a3
 	/* copy the code to RAM */
@@ -249,7 +250,7 @@ relocate_code:
  * initialization, now running from RAM.
  */
 	move.l	%a0, %a1
-	add.l	#(in_ram - CFG_MONITOR_BASE), %a1
+	add.l	#(in_ram - CONFIG_SYS_MONITOR_BASE), %a1
 	jmp	(%a1)
 
 in_ram:
@@ -259,9 +260,9 @@ clear_bss:
 	 * Now clear BSS segment
 	 */
 	move.l	%a0, %a1
-	add.l	#(_sbss - CFG_MONITOR_BASE),%a1
+	add.l	#(_sbss - CONFIG_SYS_MONITOR_BASE),%a1
 	move.l	%a0, %d1
-	add.l	#(_ebss - CFG_MONITOR_BASE),%d1
+	add.l	#(_ebss - CONFIG_SYS_MONITOR_BASE),%d1
 6:
 	clr.l	(%a1)+
 	cmp.l	%a1,%d1
@@ -271,11 +272,11 @@ clear_bss:
 	 * fix got table in RAM
 	 */
 	move.l	%a0, %a1
-	add.l	#(__got_start - CFG_MONITOR_BASE),%a1
+	add.l	#(__got_start - CONFIG_SYS_MONITOR_BASE),%a1
 	move.l	%a1,%a5		/* * fix got pointer register a5 */
 
 	move.l	%a0, %a2
-	add.l	#(__got_end - CFG_MONITOR_BASE),%a2
+	add.l	#(__got_end - CONFIG_SYS_MONITOR_BASE),%a2
 
 7:
 	move.l	(%a1),%d1
@@ -290,27 +291,27 @@ clear_bss:
 	/* quick and dirty */
 
 	move.l	%a0,%d1
-	add.l	#(icache_state - CFG_MONITOR_BASE),%d1
+	add.l	#(icache_state - CONFIG_SYS_MONITOR_BASE),%d1
 	move.l	%a0,%a1
-	add.l	#(icache_state_access_1+2 - CFG_MONITOR_BASE),%a1
+	add.l	#(icache_state_access_1+2 - CONFIG_SYS_MONITOR_BASE),%a1
 	move.l  %d1,(%a1)
 	move.l	%a0,%a1
-	add.l	#(icache_state_access_2+2 - CFG_MONITOR_BASE),%a1
+	add.l	#(icache_state_access_2+2 - CONFIG_SYS_MONITOR_BASE),%a1
 	move.l  %d1,(%a1)
 	move.l	%a0,%a1
-	add.l	#(icache_state_access_3+2 - CFG_MONITOR_BASE),%a1
+	add.l	#(icache_state_access_3+2 - CONFIG_SYS_MONITOR_BASE),%a1
 	move.l  %d1,(%a1)
 #endif
 
 	/* calculate relative jump to board_init_r in ram */
 	move.l %a0, %a1
-	add.l #(board_init_r - CFG_MONITOR_BASE), %a1
+	add.l #(board_init_r - CONFIG_SYS_MONITOR_BASE), %a1
 
 	/* set parameters for board_init_r */
 	move.l %a0,-(%sp)		/* dest_addr */
 	move.l %d0,-(%sp)		/* gd */
-#if defined(DEBUG) && (TEXT_BASE != CFG_INT_FLASH_BASE) && \
-    defined(CFG_HALT_BEFOR_RAM_JUMP)
+#if defined(DEBUG) && (TEXT_BASE != CONFIG_SYS_INT_FLASH_BASE) && \
+    defined(CONFIG_SYS_HALT_BEFOR_RAM_JUMP)
 	halt
 #endif
 	jsr	(%a1)
@@ -344,14 +345,14 @@ _int_handler:
 icache_enable:
 	move.l	#0x01000000, %d0		/* Invalidate cache cmd */
 	movec	%d0, %CACR			/* Invalidate cache */
-	move.l	#(CFG_SDRAM_BASE + 0xc000), %d0	/* Setup cache mask */
+	move.l	#(CONFIG_SYS_SDRAM_BASE + 0xc000), %d0	/* Setup cache mask */
 	movec	%d0, %ACR0			/* Enable cache */
 
 	move.l	#0x80000200, %d0		/* Setup cache mask */
 	movec	%d0, %CACR			/* Enable cache */
 	nop
 
-	move.l #(CFG_INIT_RAM_ADDR+CFG_INIT_RAM_END-8), %a1
+	move.l #(CONFIG_SYS_INIT_RAM_ADDR+CONFIG_SYS_INIT_RAM_END-8), %a1
 	moveq	#1, %d0
 	move.l	%d0, (%a1)
 	rts
@@ -474,6 +475,6 @@ dcache_status:
 	.globl	version_string
 version_string:
 	.ascii U_BOOT_VERSION
-	.ascii " (", __DATE__, " - ", __TIME__, ")"
+	.ascii " (", U_BOOT_DATE, " - ", U_BOOT_TIME, ")"
 	.ascii CONFIG_IDENT_STRING, "\0"
 	.align 4
diff --git a/cpu/mcf532x/cpu.c b/cpu/mcf532x/cpu.c
index 20d0d5cf2..331cc15da 100644
--- a/cpu/mcf532x/cpu.c
+++ b/cpu/mcf532x/cpu.c
@@ -3,7 +3,7 @@
  * (C) Copyright 2000-2003
  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
  *
- * Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
+ * Copyright (C) 2004-2008 Freescale Semiconductor, Inc.
  * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
  *
  * See file CREDITS for list of people who contributed to this
@@ -28,6 +28,7 @@
 #include <common.h>
 #include <watchdog.h>
 #include <command.h>
+#include <netdev.h>
 
 #include <asm/immap.h>
 
@@ -55,6 +56,24 @@ int checkcpu(void)
 	msk = (ccm->cir >> 6);
 	ver = (ccm->cir & 0x003f);
 	switch (msk) {
+#ifdef CONFIG_MCF5301x
+	case 0x78:
+		id = 53010;
+		break;
+	case 0x77:
+		id = 53012;
+		break;
+	case 0x76:
+		id = 53015;
+		break;
+	case 0x74:
+		id = 53011;
+		break;
+	case 0x73:
+		id = 53013;
+		break;
+#endif
+#ifdef CONFIG_MCF532x
 	case 0x54:
 		id = 5329;
 		break;
@@ -76,14 +95,17 @@ int checkcpu(void)
 	case 0x6B:
 		id = 5372;
 		break;
+#endif
 	}
 
 	if (id) {
+		char buf1[32], buf2[32];
+
 		printf("Freescale MCF%d (Mask:%01x Version:%x)\n", id, msk,
 		       ver);
-		printf("       CPU CLK %d Mhz BUS CLK %d Mhz\n",
-		       (int)(gd->cpu_clk / 1000000),
-		       (int)(gd->bus_clk / 1000000));
+		printf("       CPU CLK %s MHz BUS CLK %s MHz\n",
+		       strmhz(buf1, gd->cpu_clk),
+		       strmhz(buf2, gd->bus_clk));
 	}
 
 	return 0;
@@ -116,7 +138,7 @@ int watchdog_init(void)
 	u32 wdog_module = 0;
 
 	/* set timeout and enable watchdog */
-	wdog_module = ((CFG_CLK / 1000) * CONFIG_WATCHDOG_TIMEOUT);
+	wdog_module = ((CONFIG_SYS_CLK / 1000) * CONFIG_WATCHDOG_TIMEOUT);
 #ifdef CONFIG_M5329
 	wdp->mr = (wdog_module / 8192);
 #else
@@ -136,8 +158,6 @@ int watchdog_init(void)
  * 	int board_eth_init(bd_t *bis)
  */
 
-extern int mcffec_initialize(bd_t*);
-
 int cpu_eth_init(bd_t *bis)
 {
 	return mcffec_initialize(bis);
diff --git a/cpu/mcf532x/cpu_init.c b/cpu/mcf532x/cpu_init.c
index 93086f74b..687c7e42e 100644
--- a/cpu/mcf532x/cpu_init.c
+++ b/cpu/mcf532x/cpu_init.c
@@ -3,7 +3,7 @@
  * (C) Copyright 2000-2003
  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
  *
- * (C) Copyright 2007 Freescale Semiconductor, Inc.
+ * (C) Copyright 2004-2008 Freescale Semiconductor, Inc.
  * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
  *
  * See file CREDITS for list of people who contributed to this
@@ -27,16 +27,188 @@
 
 #include <common.h>
 #include <watchdog.h>
-
 #include <asm/immap.h>
 
-/*
- * Breath some life into the CPU...
- *
- * Set up the memory map,
- * initialize a bunch of registers,
- * initialize the UPM's
- */
+#if defined(CONFIG_CMD_NET)
+#include <config.h>
+#include <net.h>
+#include <asm/fec.h>
+#endif
+
+#ifdef CONFIG_MCF5301x
+void cpu_init_f(void)
+{
+	volatile scm1_t *scm1 = (scm1_t *) MMAP_SCM1;
+	volatile scm2_t *scm2 = (scm2_t *) MMAP_SCM2;
+	volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO;
+	volatile fbcs_t *fbcs = (fbcs_t *) MMAP_FBCS;
+
+	/* watchdog is enabled by default - disable the watchdog */
+#ifndef CONFIG_WATCHDOG
+	/*wdog->cr = 0; */
+#endif
+
+	scm1->mpr = 0x77777777;
+	scm1->pacra = 0;
+	scm1->pacrb = 0;
+	scm1->pacrc = 0;
+	scm1->pacrd = 0;
+	scm1->pacre = 0;
+	scm1->pacrf = 0;
+	scm1->pacrg = 0;
+
+#if (defined(CONFIG_SYS_CS0_BASE) && defined(CONFIG_SYS_CS0_MASK) \
+     && defined(CONFIG_SYS_CS0_CTRL))
+	gpio->par_cs |= GPIO_PAR_CS0_CS0;
+	fbcs->csar0 = CONFIG_SYS_CS0_BASE;
+	fbcs->cscr0 = CONFIG_SYS_CS0_CTRL;
+	fbcs->csmr0 = CONFIG_SYS_CS0_MASK;
+#endif
+
+#if (defined(CONFIG_SYS_CS1_BASE) && defined(CONFIG_SYS_CS1_MASK) \
+     && defined(CONFIG_SYS_CS1_CTRL))
+	gpio->par_cs |= GPIO_PAR_CS1_CS1;
+	fbcs->csar1 = CONFIG_SYS_CS1_BASE;
+	fbcs->cscr1 = CONFIG_SYS_CS1_CTRL;
+	fbcs->csmr1 = CONFIG_SYS_CS1_MASK;
+#endif
+
+#if (defined(CONFIG_SYS_CS2_BASE) && defined(CONFIG_SYS_CS2_MASK) \
+     && defined(CONFIG_SYS_CS2_CTRL))
+	fbcs->csar2 = CONFIG_SYS_CS2_BASE;
+	fbcs->cscr2 = CONFIG_SYS_CS2_CTRL;
+	fbcs->csmr2 = CONFIG_SYS_CS2_MASK;
+#endif
+
+#if (defined(CONFIG_SYS_CS3_BASE) && defined(CONFIG_SYS_CS3_MASK) \
+     && defined(CONFIG_SYS_CS3_CTRL))
+	fbcs->csar3 = CONFIG_SYS_CS3_BASE;
+	fbcs->cscr3 = CONFIG_SYS_CS3_CTRL;
+	fbcs->csmr3 = CONFIG_SYS_CS3_MASK;
+#endif
+
+#if (defined(CONFIG_SYS_CS4_BASE) && defined(CONFIG_SYS_CS4_MASK) \
+     && defined(CONFIG_SYS_CS4_CTRL))
+	gpio->par_cs |= GPIO_PAR_CS4;
+	fbcs->csar4 = CONFIG_SYS_CS4_BASE;
+	fbcs->cscr4 = CONFIG_SYS_CS4_CTRL;
+	fbcs->csmr4 = CONFIG_SYS_CS4_MASK;
+#endif
+
+#if (defined(CONFIG_SYS_CS5_BASE) && defined(CONFIG_SYS_CS5_MASK) \
+     && defined(CONFIG_SYS_CS5_CTRL))
+	gpio->par_cs |= GPIO_PAR_CS5;
+	fbcs->csar5 = CONFIG_SYS_CS5_BASE;
+	fbcs->cscr5 = CONFIG_SYS_CS5_CTRL;
+	fbcs->csmr5 = CONFIG_SYS_CS5_MASK;
+#endif
+
+#ifdef CONFIG_FSL_I2C
+	gpio->par_feci2c = GPIO_PAR_FECI2C_SDA_SDA | GPIO_PAR_FECI2C_SCL_SCL;
+#endif
+
+	icache_enable();
+}
+
+/* initialize higher level parts of CPU like timers */
+int cpu_init_r(void)
+{
+#ifdef CONFIG_MCFFEC
+	volatile ccm_t *ccm = (ccm_t *) MMAP_CCM;
+#endif
+#ifdef CONFIG_MCFRTC
+	volatile rtc_t *rtc = (rtc_t *) (CONFIG_SYS_MCFRTC_BASE);
+	volatile rtcex_t *rtcex = (rtcex_t *) & rtc->extended;
+
+	rtcex->gocu = CONFIG_SYS_RTC_CNT;
+	rtcex->gocl = CONFIG_SYS_RTC_SETUP;
+
+#endif
+#ifdef CONFIG_MCFFEC
+	if (CONFIG_SYS_FEC0_MIIBASE != CONFIG_SYS_FEC1_MIIBASE)
+		ccm->misccr |= CCM_MISCCR_FECM;
+	else
+		ccm->misccr &= ~CCM_MISCCR_FECM;
+#endif
+
+	return (0);
+}
+
+void uart_port_conf(void)
+{
+	volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO;
+
+	/* Setup Ports: */
+	switch (CONFIG_SYS_UART_PORT) {
+	case 0:
+		gpio->par_uart = (GPIO_PAR_UART_U0TXD | GPIO_PAR_UART_U0RXD);
+		break;
+	case 1:
+#ifdef CONFIG_SYS_UART1_ALT1_GPIO
+		gpio->par_simp1h &=
+		    ~(GPIO_PAR_SIMP1H_DATA1_MASK | GPIO_PAR_SIMP1H_VEN1_MASK);
+		gpio->par_simp1h |=
+		    (GPIO_PAR_SIMP1H_DATA1_U1TXD | GPIO_PAR_SIMP1H_VEN1_U1RXD);
+#elif defined(CONFIG_SYS_UART1_ALT2_GPIO)
+		gpio->par_ssih &=
+		    ~(GPIO_PAR_SSIH_RXD_MASK | GPIO_PAR_SSIH_TXD_MASK);
+		gpio->par_ssih |=
+		    (GPIO_PAR_SSIH_RXD_U1RXD | GPIO_PAR_SSIH_TXD_U1TXD);
+#endif
+		break;
+	case 2:
+#ifdef CONFIG_SYS_UART2_PRI_GPIO
+		gpio->par_uart |= (GPIO_PAR_UART_U2TXD | GPIO_PAR_UART_U2RXD);
+#elif defined(CONFIG_SYS_UART2_ALT1_GPIO)
+		gpio->par_dspih &=
+		    ~(GPIO_PAR_DSPIH_SIN_MASK | GPIO_PAR_DSPIH_SOUT_MASK);
+		gpio->par_dspih |=
+		    (GPIO_PAR_DSPIH_SIN_U2RXD | GPIO_PAR_DSPIH_SOUT_U2TXD);
+#elif defined(CONFIG_SYS_UART2_ALT2_GPIO)
+		gpio->par_feci2c &=
+		    ~(GPIO_PAR_FECI2C_SDA_MASK | GPIO_PAR_FECI2C_SCL_MASK);
+		gpio->par_feci2c |=
+		    (GPIO_PAR_FECI2C_SDA_U2TXD | GPIO_PAR_FECI2C_SCL_U2RXD);
+#endif
+		break;
+	}
+}
+
+#if defined(CONFIG_CMD_NET)
+int fecpin_setclear(struct eth_device *dev, int setclear)
+{
+	volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO;
+	struct fec_info_s *info = (struct fec_info_s *)dev->priv;
+
+	if (setclear) {
+		if (info->iobase == CONFIG_SYS_FEC0_IOBASE) {
+			gpio->par_fec |=
+			    GPIO_PAR_FEC0_7W_FEC | GPIO_PAR_FEC0_RMII_FEC;
+			gpio->par_feci2c |=
+			    GPIO_PAR_FECI2C_MDC0 | GPIO_PAR_FECI2C_MDIO0;
+		} else {
+			gpio->par_fec |=
+			    GPIO_PAR_FEC1_7W_FEC | GPIO_PAR_FEC1_RMII_FEC;
+			gpio->par_feci2c |=
+			    GPIO_PAR_FECI2C_MDC1 | GPIO_PAR_FECI2C_MDIO1;
+		}
+	} else {
+		if (info->iobase == CONFIG_SYS_FEC0_IOBASE) {
+			gpio->par_fec &=
+			    ~(GPIO_PAR_FEC0_7W_FEC | GPIO_PAR_FEC0_RMII_FEC);
+			gpio->par_feci2c &= GPIO_PAR_FECI2C_RMII0_MASK;
+		} else {
+			gpio->par_fec &=
+			    ~(GPIO_PAR_FEC1_7W_FEC | GPIO_PAR_FEC1_RMII_FEC);
+			gpio->par_feci2c &= GPIO_PAR_FECI2C_RMII1_MASK;
+		}
+	}
+	return 0;
+}
+#endif				/* CONFIG_CMD_NET */
+#endif				/* CONFIG_MCF5301x */
+
+#ifdef CONFIG_MCF532x
 void cpu_init_f(void)
 {
 	volatile scm1_t *scm1 = (scm1_t *) MMAP_SCM1;
@@ -63,46 +235,52 @@ void cpu_init_f(void)
 	/* Port configuration */
 	gpio->par_cs = 0;
 
-#if (defined(CFG_CS0_BASE) && defined(CFG_CS0_MASK) && defined(CFG_CS0_CTRL))
-	fbcs->csar0 = CFG_CS0_BASE;
-	fbcs->cscr0 = CFG_CS0_CTRL;
-	fbcs->csmr0 = CFG_CS0_MASK;
+#if (defined(CONFIG_SYS_CS0_BASE) && defined(CONFIG_SYS_CS0_MASK) \
+     && defined(CONFIG_SYS_CS0_CTRL))
+	fbcs->csar0 = CONFIG_SYS_CS0_BASE;
+	fbcs->cscr0 = CONFIG_SYS_CS0_CTRL;
+	fbcs->csmr0 = CONFIG_SYS_CS0_MASK;
 #endif
 
-#if (defined(CFG_CS1_BASE) && defined(CFG_CS1_MASK) && defined(CFG_CS1_CTRL))
+#if (defined(CONFIG_SYS_CS1_BASE) && defined(CONFIG_SYS_CS1_MASK) \
+     && defined(CONFIG_SYS_CS1_CTRL))
 	/* Latch chipselect */
 	gpio->par_cs |= GPIO_PAR_CS1;
-	fbcs->csar1 = CFG_CS1_BASE;
-	fbcs->cscr1 = CFG_CS1_CTRL;
-	fbcs->csmr1 = CFG_CS1_MASK;
+	fbcs->csar1 = CONFIG_SYS_CS1_BASE;
+	fbcs->cscr1 = CONFIG_SYS_CS1_CTRL;
+	fbcs->csmr1 = CONFIG_SYS_CS1_MASK;
 #endif
 
-#if (defined(CFG_CS2_BASE) && defined(CFG_CS2_MASK) && defined(CFG_CS2_CTRL))
+#if (defined(CONFIG_SYS_CS2_BASE) && defined(CONFIG_SYS_CS2_MASK) \
+     && defined(CONFIG_SYS_CS2_CTRL))
 	gpio->par_cs |= GPIO_PAR_CS2;
-	fbcs->csar2 = CFG_CS2_BASE;
-	fbcs->cscr2 = CFG_CS2_CTRL;
-	fbcs->csmr2 = CFG_CS2_MASK;
+	fbcs->csar2 = CONFIG_SYS_CS2_BASE;
+	fbcs->cscr2 = CONFIG_SYS_CS2_CTRL;
+	fbcs->csmr2 = CONFIG_SYS_CS2_MASK;
 #endif
 
-#if (defined(CFG_CS3_BASE) && defined(CFG_CS3_MASK) && defined(CFG_CS3_CTRL))
+#if (defined(CONFIG_SYS_CS3_BASE) && defined(CONFIG_SYS_CS3_MASK) \
+     && defined(CONFIG_SYS_CS3_CTRL))
 	gpio->par_cs |= GPIO_PAR_CS3;
-	fbcs->csar3 = CFG_CS3_BASE;
-	fbcs->cscr3 = CFG_CS3_CTRL;
-	fbcs->csmr3 = CFG_CS3_MASK;
+	fbcs->csar3 = CONFIG_SYS_CS3_BASE;
+	fbcs->cscr3 = CONFIG_SYS_CS3_CTRL;
+	fbcs->csmr3 = CONFIG_SYS_CS3_MASK;
 #endif
 
-#if (defined(CFG_CS4_BASE) && defined(CFG_CS4_MASK) && defined(CFG_CS4_CTRL))
+#if (defined(CONFIG_SYS_CS4_BASE) && defined(CONFIG_SYS_CS4_MASK) \
+     && defined(CONFIG_SYS_CS4_CTRL))
 	gpio->par_cs |= GPIO_PAR_CS4;
-	fbcs->csar4 = CFG_CS4_BASE;
-	fbcs->cscr4 = CFG_CS4_CTRL;
-	fbcs->csmr4 = CFG_CS4_MASK;
+	fbcs->csar4 = CONFIG_SYS_CS4_BASE;
+	fbcs->cscr4 = CONFIG_SYS_CS4_CTRL;
+	fbcs->csmr4 = CONFIG_SYS_CS4_MASK;
 #endif
 
-#if (defined(CFG_CS5_BASE) && defined(CFG_CS5_MASK) && defined(CFG_CS5_CTRL))
+#if (defined(CONFIG_SYS_CS5_BASE) && defined(CONFIG_SYS_CS5_MASK) \
+     && defined(CONFIG_SYS_CS5_CTRL))
 	gpio->par_cs |= GPIO_PAR_CS5;
-	fbcs->csar5 = CFG_CS5_BASE;
-	fbcs->cscr5 = CFG_CS5_CTRL;
-	fbcs->csmr5 = CFG_CS5_MASK;
+	fbcs->csar5 = CONFIG_SYS_CS5_BASE;
+	fbcs->cscr5 = CONFIG_SYS_CS5_CTRL;
+	fbcs->csmr5 = CONFIG_SYS_CS5_MASK;
 #endif
 
 #ifdef CONFIG_FSL_I2C
@@ -125,7 +303,7 @@ void uart_port_conf(void)
 	volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO;
 
 	/* Setup Ports: */
-	switch (CFG_UART_PORT) {
+	switch (CONFIG_SYS_UART_PORT) {
 	case 0:
 		gpio->par_uart = (GPIO_PAR_UART_TXD0 | GPIO_PAR_UART_RXD0);
 		break;
@@ -139,3 +317,22 @@ void uart_port_conf(void)
 		break;
 	}
 }
+
+#if defined(CONFIG_CMD_NET)
+int fecpin_setclear(struct eth_device *dev, int setclear)
+{
+	volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO;
+
+	if (setclear) {
+		gpio->par_fec |= GPIO_PAR_FEC_7W_FEC | GPIO_PAR_FEC_MII_FEC;
+		gpio->par_feci2c |=
+		    GPIO_PAR_FECI2C_MDC_EMDC | GPIO_PAR_FECI2C_MDIO_EMDIO;
+	} else {
+		gpio->par_fec &= ~(GPIO_PAR_FEC_7W_FEC | GPIO_PAR_FEC_MII_FEC);
+		gpio->par_feci2c &=
+		    ~(GPIO_PAR_FECI2C_MDC_EMDC | GPIO_PAR_FECI2C_MDIO_EMDIO);
+	}
+	return 0;
+}
+#endif
+#endif				/* CONFIG_MCF532x */
diff --git a/cpu/mcf532x/interrupts.c b/cpu/mcf532x/interrupts.c
index ff50d7ddf..d6c820545 100644
--- a/cpu/mcf532x/interrupts.c
+++ b/cpu/mcf532x/interrupts.c
@@ -28,7 +28,7 @@
 
 int interrupt_init(void)
 {
-	volatile int0_t *intp = (int0_t *) (CFG_INTR_BASE);
+	volatile int0_t *intp = (int0_t *) (CONFIG_SYS_INTR_BASE);
 
 	/* Make sure all interrupts are disabled */
 	intp->imrh0 |= 0xFFFFFFFF;
@@ -41,9 +41,9 @@ int interrupt_init(void)
 #if defined(CONFIG_MCFTMR)
 void dtimer_intr_setup(void)
 {
-	volatile int0_t *intp = (int0_t *) (CFG_INTR_BASE);
+	volatile int0_t *intp = (int0_t *) (CONFIG_SYS_INTR_BASE);
 
-	intp->icr0[CFG_TMRINTR_NO] = CFG_TMRINTR_PRI;
-	intp->imrh0 &= ~CFG_TMRINTR_MASK;
+	intp->icr0[CONFIG_SYS_TMRINTR_NO] = CONFIG_SYS_TMRINTR_PRI;
+	intp->imrh0 &= ~CONFIG_SYS_TMRINTR_MASK;
 }
 #endif
diff --git a/cpu/mcf532x/speed.c b/cpu/mcf532x/speed.c
index a11e425ca..0d378e63d 100644
--- a/cpu/mcf532x/speed.c
+++ b/cpu/mcf532x/speed.c
@@ -3,7 +3,7 @@
  * (C) Copyright 2000-2003
  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
  *
- * Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
+ * Copyright (C) 2004-2008 Freescale Semiconductor, Inc.
  * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
  *
  * See file CREDITS for list of people who contributed to this
@@ -36,26 +36,33 @@ DECLARE_GLOBAL_DATA_PTR;
 #define MAX_FVCO	500000	/* KHz */
 #define MAX_FSYS	80000	/* KHz */
 #define MIN_FSYS	58333	/* KHz */
+
+#ifdef CONFIG_MCF5301x
+#define FREF		20000	/* KHz */
+#define MAX_MFD		63	/* Multiplier */
+#define MIN_MFD		0	/* Multiplier */
+#define USBDIV		8
+
+/* Low Power Divider specifications */
+#define MIN_LPD		(0)	/* Divider (not encoded) */
+#define MAX_LPD		(15)	/* Divider (not encoded) */
+#define DEFAULT_LPD	(0)	/* Divider (not encoded) */
+#endif
+
+#ifdef CONFIG_MCF532x
 #define FREF		16000	/* KHz */
 #define MAX_MFD		135	/* Multiplier */
 #define MIN_MFD		88	/* Multiplier */
-#define BUSDIV		6	/* Divider */
-/*
- * Low Power Divider specifications
- */
+
+/* Low Power Divider specifications */
 #define MIN_LPD		(1 << 0)	/* Divider (not encoded) */
 #define MAX_LPD		(1 << 15)	/* Divider (not encoded) */
 #define DEFAULT_LPD	(1 << 1)	/* Divider (not encoded) */
+#endif
 
-/*
- * Get the value of the current system clock
- *
- * Parameters:
- *  none
- *
- * Return Value:
- *  The current output system frequency
- */
+#define BUSDIV		6	/* Divider */
+
+/* Get the value of the current system clock */
 int get_sys_clock(void)
 {
 	volatile ccm_t *ccm = (volatile ccm_t *)(MMAP_CCM);
@@ -65,9 +72,23 @@ int get_sys_clock(void)
 	/* Test to see if device is in LIMP mode */
 	if (ccm->misccr & CCM_MISCCR_LIMP) {
 		divider = ccm->cdr & CCM_CDR_LPDIV(0xF);
+#ifdef CONFIG_MCF5301x
+		return (FREF / (3 * (1 << divider)));
+#endif
+#ifdef CONFIG_MCF532x
 		return (FREF / (2 << divider));
+#endif
 	} else {
+#ifdef CONFIG_MCF5301x
+		u32 pfdr = (pll->pcr & 0x3F) + 1;
+		u32 refdiv = (1 << ((pll->pcr & PLL_PCR_REFDIV(7)) >> 8));
+		u32 busdiv = ((pll->pdr & 0x00F0) >> 4) + 1;
+
+		return (((FREF * pfdr) / refdiv) / busdiv);
+#endif
+#ifdef CONFIG_MCF532x
 		return ((FREF * pll->pfdr) / (BUSDIV * 4));
+#endif
 	}
 }
 
@@ -92,7 +113,7 @@ int clock_limp(int div)
 		div = MAX_LPD;
 
 	/* Save of the current value of the SSIDIV so we don't overwrite the value */
-	temp = (ccm->cdr & CCM_CDR_SSIDIV(0xF));
+	temp = (ccm->cdr & CCM_CDR_SSIDIV(0xFF));
 
 	/* Apply the divider to the system clock */
 	ccm->cdr = (CCM_CDR_LPDIV(div) | CCM_CDR_SSIDIV(temp));
@@ -102,15 +123,7 @@ int clock_limp(int div)
 	return (FREF / (3 * (1 << div)));
 }
 
-/*
- * Exit low power LIMP mode
- *
- * Parameters:
- *  div     Desired system frequency divider
- *
- * Return Value:
- *  The resulting output system frequency
- */
+/* Exit low power LIMP mode */
 int clock_exit_limp(void)
 {
 	volatile ccm_t *ccm = (volatile ccm_t *)(MMAP_CCM);
@@ -139,7 +152,10 @@ int clock_exit_limp(void)
  */
 int clock_pll(int fsys, int flags)
 {
+#ifdef CONFIG_MCF532x
 	volatile u32 *sdram_workaround = (volatile u32 *)(MMAP_SDRAM + 0x80);
+#endif
+	volatile sdram_t *sdram = (volatile sdram_t *)(MMAP_SDRAM);
 	volatile pll_t *pll = (volatile pll_t *)(MMAP_PLL);
 	int fref, temp, fout, mfd;
 	u32 i;
@@ -148,9 +164,17 @@ int clock_pll(int fsys, int flags)
 
 	if (fsys == 0) {
 		/* Return current PLL output */
+#ifdef CONFIG_MCF5301x
+		u32 busdiv = ((pll->pdr >> 4) & 0x0F) + 1;
+		mfd = (pll->pcr & 0x3F) + 1;
+
+		return (fref * mfd) / busdiv;
+#endif
+#ifdef CONFIG_MCF532x
 		mfd = pll->pfdr;
 
 		return (fref * mfd / (BUSDIV * 4));
+#endif
 	}
 
 	/* Check bounds of requested system clock */
@@ -160,21 +184,33 @@ int clock_pll(int fsys, int flags)
 	if (fsys < MIN_FSYS)
 		fsys = MIN_FSYS;
 
-	/* Multiplying by 100 when calculating the temp value,
-	   and then dividing by 100 to calculate the mfd allows
-	   for exact values without needing to include floating
-	   point libraries. */
+	/*
+	 * Multiplying by 100 when calculating the temp value,
+	 * and then dividing by 100 to calculate the mfd allows
+	 * for exact values without needing to include floating
+	 * point libraries.
+	 */
 	temp = (100 * fsys) / fref;
+#ifdef CONFIG_MCF5301x
+	mfd = (BUSDIV * temp) / 100;
+
+	/* Determine the output frequency for selected values */
+	fout = ((fref * mfd) / BUSDIV);
+#endif
+#ifdef CONFIG_MCF532x
 	mfd = (4 * BUSDIV * temp) / 100;
 
 	/* Determine the output frequency for selected values */
 	fout = ((fref * mfd) / (BUSDIV * 4));
+#endif
 
 	/*
 	 * Check to see if the SDRAM has already been initialized.
 	 * If it has then the SDRAM needs to be put into self refresh
 	 * mode before reprogramming the PLL.
 	 */
+	if (sdram->ctrl & SDRAMC_SDCR_REF)
+		sdram->ctrl &= ~SDRAMC_SDCR_CKE;
 
 	/*
 	 * Initialize the PLL to generate the new system clock frequency.
@@ -184,20 +220,37 @@ int clock_pll(int fsys, int flags)
 	/* Enter LIMP mode */
 	clock_limp(DEFAULT_LPD);
 
+#ifdef CONFIG_MCF5301x
+	pll->pdr =
+	    PLL_PDR_OUTDIV1((BUSDIV / 3) - 1)	|
+	    PLL_PDR_OUTDIV2(BUSDIV - 1)	|
+	    PLL_PDR_OUTDIV3((BUSDIV / 2) - 1)	|
+	    PLL_PDR_OUTDIV4(USBDIV - 1);
+
+	pll->pcr &= PLL_PCR_FBDIV_MASK;
+	pll->pcr |= PLL_PCR_FBDIV(mfd - 1);
+#endif
+#ifdef CONFIG_MCF532x
 	/* Reprogram PLL for desired fsys */
 	pll->podr = (PLL_PODR_CPUDIV(BUSDIV / 3) | PLL_PODR_BUSDIV(BUSDIV));
 
 	pll->pfdr = mfd;
+#endif
 
 	/* Exit LIMP mode */
 	clock_exit_limp();
 
+	/* Return the SDRAM to normal operation if it is in use. */
+	if (sdram->ctrl & SDRAMC_SDCR_REF)
+		sdram->ctrl |= SDRAMC_SDCR_CKE;
+
+#ifdef CONFIG_MCF532x
 	/*
-	 * Return the SDRAM to normal operation if it is in use.
+	 * software workaround for SDRAM opeartion after exiting LIMP
+	 * mode errata
 	 */
-
-	/* software workaround for SDRAM opeartion after exiting LIMP mode errata */
-	*sdram_workaround = CFG_SDRAM_BASE;
+	*sdram_workaround = CONFIG_SYS_SDRAM_BASE;
+#endif
 
 	/* wait for DQS logic to relock */
 	for (i = 0; i < 0x200; i++) ;
@@ -205,12 +258,10 @@ int clock_pll(int fsys, int flags)
 	return fout;
 }
 
-/*
- * get_clocks() fills in gd->cpu_clock and gd->bus_clk
- */
+/* get_clocks() fills in gd->cpu_clock and gd->bus_clk */
 int get_clocks(void)
 {
-	gd->bus_clk = clock_pll(CFG_CLK / 1000, 0) * 1000;
+	gd->bus_clk = clock_pll(CONFIG_SYS_CLK / 1000, 0) * 1000;
 	gd->cpu_clk = (gd->bus_clk * 3);
 
 #ifdef CONFIG_FSL_I2C
diff --git a/cpu/mcf532x/start.S b/cpu/mcf532x/start.S
index c806f7a96..a46c47adc 100644
--- a/cpu/mcf532x/start.S
+++ b/cpu/mcf532x/start.S
@@ -2,6 +2,9 @@
  * Copyright (C) 2003	Josef Baumgartner <josef.baumgartner@telex.de>
  * Based on code from Bernhard Kuhn <bkuhn@metrowerks.com>
  *
+ * (C) Copyright 2004-2008 Freescale Semiconductor, Inc.
+ * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
+ *
  * See file CREDITS for list of people who contributed to this
  * project.
  *
@@ -22,6 +25,7 @@
  */
 
 #include <config.h>
+#include <timestamp.h>
 #include "version.h"
 
 #ifndef	 CONFIG_IDENT_STRING
@@ -127,10 +131,10 @@ _start:
 	move.w #0x2700,%sr	/* Mask off Interrupt */
 
 	/* Set vector base register at the beginning of the Flash */
-	move.l	#CFG_FLASH_BASE, %d0
+	move.l	#CONFIG_SYS_FLASH_BASE, %d0
 	movec	%d0, %VBR
 
-	move.l	#(CFG_INIT_RAM_ADDR + CFG_INIT_RAM_CTRL), %d0
+	move.l	#(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_RAM_CTRL), %d0
 	movec	%d0, %RAMBAR1
 
 	/* invalidate and disable cache */
@@ -140,16 +144,24 @@ _start:
 	movec	%d0, %ACR0
 	movec	%d0, %ACR1
 
+#ifdef CONFIG_MCF5301x
+	move.l	#(0xFC0a0010), %a0
+	move.w	(%a0), %d0
+	and.l	%d0, 0xEFFF
+
+	move.w	%d0, (%a0)
+#endif
+
 	/* initialize general use internal ram */
 	move.l #0, %d0
-	move.l #(CFG_INIT_RAM_ADDR+CFG_INIT_RAM_END-8), %a1
-	move.l #(CFG_INIT_RAM_ADDR+CFG_INIT_RAM_END-4), %a2
+	move.l #(CONFIG_SYS_INIT_RAM_ADDR+CONFIG_SYS_INIT_RAM_END-8), %a1
+	move.l #(CONFIG_SYS_INIT_RAM_ADDR+CONFIG_SYS_INIT_RAM_END-4), %a2
 	move.l %d0, (%a1)
 	move.l %d0, (%a2)
 
 	/* set stackpointer to end of internal ram to get some stackspace for the
 	   first c-code */
-	move.l	#(CFG_INIT_RAM_ADDR + CFG_INIT_SP_OFFSET), %sp
+	move.l	#(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET), %sp
 	clr.l %sp@-
 
 	move.l #__got_start, %a5	/* put relocation table address to a5 */
@@ -180,7 +192,7 @@ relocate_code:
 	move.l 12(%a6), %d0		/* Save copy of Global Data pointer */
 	move.l 16(%a6), %a0		/* Save copy of Destination Address */
 
-	move.l #CFG_MONITOR_BASE, %a1
+	move.l #CONFIG_SYS_MONITOR_BASE, %a1
 	move.l #__init_end, %a2
 	move.l %a0, %a3
 
@@ -195,7 +207,7 @@ relocate_code:
  * initialization, now running from RAM.
  */
 	move.l	%a0, %a1
-	add.l	#(in_ram - CFG_MONITOR_BASE), %a1
+	add.l	#(in_ram - CONFIG_SYS_MONITOR_BASE), %a1
 	jmp	(%a1)
 
 in_ram:
@@ -205,9 +217,9 @@ clear_bss:
 	 * Now clear BSS segment
 	 */
 	move.l	%a0, %a1
-	add.l	#(_sbss - CFG_MONITOR_BASE),%a1
+	add.l	#(_sbss - CONFIG_SYS_MONITOR_BASE),%a1
 	move.l	%a0, %d1
-	add.l	#(_ebss - CFG_MONITOR_BASE),%d1
+	add.l	#(_ebss - CONFIG_SYS_MONITOR_BASE),%d1
 6:
 	clr.l	(%a1)+
 	cmp.l	%a1,%d1
@@ -217,11 +229,11 @@ clear_bss:
 	 * fix got table in RAM
 	 */
 	move.l	%a0, %a1
-	add.l	#(__got_start - CFG_MONITOR_BASE),%a1
+	add.l	#(__got_start - CONFIG_SYS_MONITOR_BASE),%a1
 	move.l	%a1,%a5		/* * fix got pointer register a5 */
 
 	move.l	%a0, %a2
-	add.l	#(__got_end - CFG_MONITOR_BASE),%a2
+	add.l	#(__got_end - CONFIG_SYS_MONITOR_BASE),%a2
 
 7:
 	move.l	(%a1),%d1
@@ -233,7 +245,7 @@ clear_bss:
 
 	/* calculate relative jump to board_init_r in ram */
 	move.l %a0, %a1
-	add.l #(board_init_r - CFG_MONITOR_BASE), %a1
+	add.l #(board_init_r - CONFIG_SYS_MONITOR_BASE), %a1
 
 	/* set parameters for board_init_r */
 	move.l %a0,-(%sp)		/* dest_addr */
@@ -268,14 +280,14 @@ _int_handler:
 icache_enable:
 	move.l	#0x01000000, %d0		/* Invalidate cache cmd */
 	movec	%d0, %CACR			/* Invalidate cache */
-	move.l	#(CFG_SDRAM_BASE + 0x1c000), %d0
+	move.l	#(CONFIG_SYS_SDRAM_BASE + 0x1c000), %d0
 	movec	%d0, %ACR0			/* Enable cache */
 
 	move.l	#0x80000200, %d0		/* Setup cache mask */
 	movec	%d0, %CACR			/* Enable cache */
 	nop
 
-	move.l #(CFG_INIT_RAM_ADDR+CFG_INIT_RAM_END-8), %a1
+	move.l #(CONFIG_SYS_INIT_RAM_ADDR+CONFIG_SYS_INIT_RAM_END-8), %a1
 	moveq	#1, %d0
 	move.l	%d0, (%a1)
 	rts
@@ -288,14 +300,14 @@ icache_disable:
 	movec	%d0, %ACR0
 	movec	%d0, %ACR1
 
-	move.l #(CFG_INIT_RAM_ADDR+CFG_INIT_RAM_END-8), %a1
+	move.l #(CONFIG_SYS_INIT_RAM_ADDR+CONFIG_SYS_INIT_RAM_END-8), %a1
 	moveq	#0, %d0
 	move.l	%d0, (%a1)
 	rts
 
 	.globl	icache_status
 icache_status:
-	move.l #(CFG_INIT_RAM_ADDR+CFG_INIT_RAM_END-8), %a1
+	move.l #(CONFIG_SYS_INIT_RAM_ADDR+CONFIG_SYS_INIT_RAM_END-8), %a1
 	move.l	(%a1), %d0
 	rts
 
@@ -307,7 +319,7 @@ icache_invalid:
 
 	.globl	dcache_enable
 dcache_enable:
-	move.l #(CFG_INIT_RAM_ADDR+CFG_INIT_RAM_END-4), %a1
+	move.l #(CONFIG_SYS_INIT_RAM_ADDR+CONFIG_SYS_INIT_RAM_END-4), %a1
 	moveq	#1, %d0
 	move.l	%d0, (%a1)
 	rts
@@ -315,14 +327,14 @@ dcache_enable:
     /* No dcache, just a dummy function */
 	.globl	dcache_disable
 dcache_disable:
-	move.l #(CFG_INIT_RAM_ADDR+CFG_INIT_RAM_END-4), %a1
+	move.l #(CONFIG_SYS_INIT_RAM_ADDR+CONFIG_SYS_INIT_RAM_END-4), %a1
 	moveq	#0, %d0
 	move.l	%d0, (%a1)
 	rts
 
 	.globl	dcache_status
 dcache_status:
-	move.l #(CFG_INIT_RAM_ADDR+CFG_INIT_RAM_END-4), %a1
+	move.l #(CONFIG_SYS_INIT_RAM_ADDR+CONFIG_SYS_INIT_RAM_END-4), %a1
 	move.l	(%a1), %d0
 	rts
 
@@ -331,6 +343,6 @@ dcache_status:
 	.globl	version_string
 version_string:
 	.ascii U_BOOT_VERSION
-	.ascii " (", __DATE__, " - ", __TIME__, ")"
+	.ascii " (", U_BOOT_DATE, " - ", U_BOOT_TIME, ")"
 	.ascii CONFIG_IDENT_STRING, "\0"
 	.align 4
diff --git a/cpu/mcf5445x/cpu.c b/cpu/mcf5445x/cpu.c
index ab342ddeb..6238bc020 100644
--- a/cpu/mcf5445x/cpu.c
+++ b/cpu/mcf5445x/cpu.c
@@ -28,6 +28,7 @@
 #include <common.h>
 #include <watchdog.h>
 #include <command.h>
+#include <netdev.h>
 
 #include <asm/immap.h>
 
@@ -75,21 +76,23 @@ int checkcpu(void)
 	}
 
 	if (id) {
+		char buf1[32], buf2[32], buf3[32];
+
 		printf("Freescale MCF%d (Mask:%01x Version:%x)\n", id, msk,
 		       ver);
-		printf("       CPU CLK %d Mhz BUS CLK %d Mhz FLB CLK %d Mhz\n",
-		       (int)(gd->cpu_clk / 1000000),
-		       (int)(gd->bus_clk / 1000000),
-		       (int)(gd->flb_clk / 1000000));
+		printf("       CPU CLK %s MHz BUS CLK %s MHz FLB CLK %s MHz\n",
+		       strmhz(buf1, gd->cpu_clk),
+		       strmhz(buf2, gd->bus_clk),
+		       strmhz(buf3, gd->flb_clk));
 #ifdef CONFIG_PCI
-		printf("       PCI CLK %d Mhz INP CLK %d Mhz VCO CLK %d Mhz\n",
-		       (int)(gd->pci_clk / 1000000),
-		       (int)(gd->inp_clk / 1000000),
-		       (int)(gd->vco_clk / 1000000));
+		printf("       PCI CLK %s MHz INP CLK %s MHz VCO CLK %s MHz\n",
+		       strmhz(buf1, gd->pci_clk),
+		       strmhz(buf2, gd->inp_clk),
+		       strmhz(buf3, gd->vco_clk));
 #else
-		printf("       INP CLK %d Mhz VCO CLK %d Mhz\n",
-		       (int)(gd->inp_clk / 1000000),
-		       (int)(gd->vco_clk / 1000000));
+		printf("       INP CLK %s MHz VCO CLK %s MHz\n",
+		       strmhz(buf1, gd->inp_clk),
+		       strmhz(buf2, gd->vco_clk));
 #endif
 	}
 
@@ -102,8 +105,6 @@ int checkcpu(void)
  * 	int board_eth_init(bd_t *bis)
  */
 
-extern int mcffec_initialize(bd_t*);
-
 int cpu_eth_init(bd_t *bis)
 {
 	return mcffec_initialize(bis);
diff --git a/cpu/mcf5445x/cpu_init.c b/cpu/mcf5445x/cpu_init.c
index 51a9e9037..7e04e32c7 100644
--- a/cpu/mcf5445x/cpu_init.c
+++ b/cpu/mcf5445x/cpu_init.c
@@ -27,10 +27,15 @@
 
 #include <common.h>
 #include <watchdog.h>
-
 #include <asm/immap.h>
 #include <asm/rtc.h>
 
+#if defined(CONFIG_CMD_NET)
+#include <config.h>
+#include <net.h>
+#include <asm/fec.h>
+#endif
+
 /*
  * Breath some life into the CPU...
  *
@@ -62,42 +67,42 @@ void cpu_init_f(void)
 	    GPIO_PAR_FBCTL_TS_TS;
 
 #if !defined(CONFIG_CF_SBF)
-#if (defined(CFG_CS0_BASE) && defined(CFG_CS0_MASK) && defined(CFG_CS0_CTRL))
-	fbcs->csar0 = CFG_CS0_BASE;
-	fbcs->cscr0 = CFG_CS0_CTRL;
-	fbcs->csmr0 = CFG_CS0_MASK;
+#if (defined(CONFIG_SYS_CS0_BASE) && defined(CONFIG_SYS_CS0_MASK) && defined(CONFIG_SYS_CS0_CTRL))
+	fbcs->csar0 = CONFIG_SYS_CS0_BASE;
+	fbcs->cscr0 = CONFIG_SYS_CS0_CTRL;
+	fbcs->csmr0 = CONFIG_SYS_CS0_MASK;
 #endif
 #endif
 
-#if (defined(CFG_CS1_BASE) && defined(CFG_CS1_MASK) && defined(CFG_CS1_CTRL))
+#if (defined(CONFIG_SYS_CS1_BASE) && defined(CONFIG_SYS_CS1_MASK) && defined(CONFIG_SYS_CS1_CTRL))
 	/* Latch chipselect */
-	fbcs->csar1 = CFG_CS1_BASE;
-	fbcs->cscr1 = CFG_CS1_CTRL;
-	fbcs->csmr1 = CFG_CS1_MASK;
+	fbcs->csar1 = CONFIG_SYS_CS1_BASE;
+	fbcs->cscr1 = CONFIG_SYS_CS1_CTRL;
+	fbcs->csmr1 = CONFIG_SYS_CS1_MASK;
 #endif
 
-#if (defined(CFG_CS2_BASE) && defined(CFG_CS2_MASK) && defined(CFG_CS2_CTRL))
-	fbcs->csar2 = CFG_CS2_BASE;
-	fbcs->cscr2 = CFG_CS2_CTRL;
-	fbcs->csmr2 = CFG_CS2_MASK;
+#if (defined(CONFIG_SYS_CS2_BASE) && defined(CONFIG_SYS_CS2_MASK) && defined(CONFIG_SYS_CS2_CTRL))
+	fbcs->csar2 = CONFIG_SYS_CS2_BASE;
+	fbcs->cscr2 = CONFIG_SYS_CS2_CTRL;
+	fbcs->csmr2 = CONFIG_SYS_CS2_MASK;
 #endif
 
-#if (defined(CFG_CS3_BASE) && defined(CFG_CS3_MASK) && defined(CFG_CS3_CTRL))
-	fbcs->csar3 = CFG_CS3_BASE;
-	fbcs->cscr3 = CFG_CS3_CTRL;
-	fbcs->csmr3 = CFG_CS3_MASK;
+#if (defined(CONFIG_SYS_CS3_BASE) && defined(CONFIG_SYS_CS3_MASK) && defined(CONFIG_SYS_CS3_CTRL))
+	fbcs->csar3 = CONFIG_SYS_CS3_BASE;
+	fbcs->cscr3 = CONFIG_SYS_CS3_CTRL;
+	fbcs->csmr3 = CONFIG_SYS_CS3_MASK;
 #endif
 
-#if (defined(CFG_CS4_BASE) && defined(CFG_CS4_MASK) && defined(CFG_CS4_CTRL))
-	fbcs->csar4 = CFG_CS4_BASE;
-	fbcs->cscr4 = CFG_CS4_CTRL;
-	fbcs->csmr4 = CFG_CS4_MASK;
+#if (defined(CONFIG_SYS_CS4_BASE) && defined(CONFIG_SYS_CS4_MASK) && defined(CONFIG_SYS_CS4_CTRL))
+	fbcs->csar4 = CONFIG_SYS_CS4_BASE;
+	fbcs->cscr4 = CONFIG_SYS_CS4_CTRL;
+	fbcs->csmr4 = CONFIG_SYS_CS4_MASK;
 #endif
 
-#if (defined(CFG_CS5_BASE) && defined(CFG_CS5_MASK) && defined(CFG_CS5_CTRL))
-	fbcs->csar5 = CFG_CS5_BASE;
-	fbcs->cscr5 = CFG_CS5_CTRL;
-	fbcs->csmr5 = CFG_CS5_MASK;
+#if (defined(CONFIG_SYS_CS5_BASE) && defined(CONFIG_SYS_CS5_MASK) && defined(CONFIG_SYS_CS5_CTRL))
+	fbcs->csar5 = CONFIG_SYS_CS5_BASE;
+	fbcs->cscr5 = CONFIG_SYS_CS5_CTRL;
+	fbcs->csmr5 = CONFIG_SYS_CS5_MASK;
 #endif
 
 #ifdef CONFIG_FSL_I2C
@@ -113,11 +118,11 @@ void cpu_init_f(void)
 int cpu_init_r(void)
 {
 #ifdef CONFIG_MCFRTC
-	volatile rtc_t *rtc = (volatile rtc_t *)(CFG_MCFRTC_BASE);
+	volatile rtc_t *rtc = (volatile rtc_t *)(CONFIG_SYS_MCFRTC_BASE);
 	volatile rtcex_t *rtcex = (volatile rtcex_t *)&rtc->extended;
 
-	rtcex->gocu = (CFG_RTC_OSCILLATOR >> 16) & 0xFFFF;
-	rtcex->gocl = CFG_RTC_OSCILLATOR & 0xFFFF;
+	rtcex->gocu = (CONFIG_SYS_RTC_OSCILLATOR >> 16) & 0xFFFF;
+	rtcex->gocl = CONFIG_SYS_RTC_OSCILLATOR & 0xFFFF;
 #endif
 
 	return (0);
@@ -128,7 +133,7 @@ void uart_port_conf(void)
 	volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO;
 
 	/* Setup Ports: */
-	switch (CFG_UART_PORT) {
+	switch (CONFIG_SYS_UART_PORT) {
 	case 0:
 		gpio->par_uart =
 		    (GPIO_PAR_UART_U0TXD_U0TXD | GPIO_PAR_UART_U0RXD_U0RXD);
@@ -139,3 +144,30 @@ void uart_port_conf(void)
 		break;
 	}
 }
+
+#if defined(CONFIG_CMD_NET)
+int fecpin_setclear(struct eth_device *dev, int setclear)
+{
+	volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO;
+	struct fec_info_s *info = (struct fec_info_s *)dev->priv;
+
+	if (setclear) {
+		gpio->par_feci2c |=
+		    (GPIO_PAR_FECI2C_MDC0_MDC0 | GPIO_PAR_FECI2C_MDIO0_MDIO0);
+
+		if (info->iobase == CONFIG_SYS_FEC0_IOBASE)
+			gpio->par_fec |= GPIO_PAR_FEC_FEC0_RMII_GPIO;
+		else
+			gpio->par_fec |= GPIO_PAR_FEC_FEC1_RMII_ATA;
+	} else {
+		gpio->par_feci2c &=
+		    ~(GPIO_PAR_FECI2C_MDC0_MDC0 | GPIO_PAR_FECI2C_MDIO0_MDIO0);
+
+		if (info->iobase == CONFIG_SYS_FEC0_IOBASE)
+			gpio->par_fec &= GPIO_PAR_FEC_FEC0_MASK;
+		else
+			gpio->par_fec &= GPIO_PAR_FEC_FEC1_MASK;
+	}
+	return 0;
+}
+#endif
diff --git a/cpu/mcf5445x/dspi.c b/cpu/mcf5445x/dspi.c
index 959d6bd6a..6d3ebab6e 100644
--- a/cpu/mcf5445x/dspi.c
+++ b/cpu/mcf5445x/dspi.c
@@ -47,29 +47,29 @@ void dspi_init(void)
 	    DSPI_DMCR_CSIS2 | DSPI_DMCR_CSIS1 | DSPI_DMCR_CSIS0 |
 	    DSPI_DMCR_CRXF | DSPI_DMCR_CTXF;
 
-#ifdef CFG_DSPI_DCTAR0
-	dspi->dctar0 = CFG_DSPI_DCTAR0;
+#ifdef CONFIG_SYS_DSPI_DCTAR0
+	dspi->dctar0 = CONFIG_SYS_DSPI_DCTAR0;
 #endif
-#ifdef CFG_DSPI_DCTAR1
-	dspi->dctar1 = CFG_DSPI_DCTAR1;
+#ifdef CONFIG_SYS_DSPI_DCTAR1
+	dspi->dctar1 = CONFIG_SYS_DSPI_DCTAR1;
 #endif
-#ifdef CFG_DSPI_DCTAR2
-	dspi->dctar2 = CFG_DSPI_DCTAR2;
+#ifdef CONFIG_SYS_DSPI_DCTAR2
+	dspi->dctar2 = CONFIG_SYS_DSPI_DCTAR2;
 #endif
-#ifdef CFG_DSPI_DCTAR3
-	dspi->dctar3 = CFG_DSPI_DCTAR3;
+#ifdef CONFIG_SYS_DSPI_DCTAR3
+	dspi->dctar3 = CONFIG_SYS_DSPI_DCTAR3;
 #endif
-#ifdef CFG_DSPI_DCTAR4
-	dspi->dctar4 = CFG_DSPI_DCTAR4;
+#ifdef CONFIG_SYS_DSPI_DCTAR4
+	dspi->dctar4 = CONFIG_SYS_DSPI_DCTAR4;
 #endif
-#ifdef CFG_DSPI_DCTAR5
-	dspi->dctar5 = CFG_DSPI_DCTAR5;
+#ifdef CONFIG_SYS_DSPI_DCTAR5
+	dspi->dctar5 = CONFIG_SYS_DSPI_DCTAR5;
 #endif
-#ifdef CFG_DSPI_DCTAR6
-	dspi->dctar6 = CFG_DSPI_DCTAR6;
+#ifdef CONFIG_SYS_DSPI_DCTAR6
+	dspi->dctar6 = CONFIG_SYS_DSPI_DCTAR6;
 #endif
-#ifdef CFG_DSPI_DCTAR7
-	dspi->dctar7 = CFG_DSPI_DCTAR7;
+#ifdef CONFIG_SYS_DSPI_DCTAR7
+	dspi->dctar7 = CONFIG_SYS_DSPI_DCTAR7;
 #endif
 }
 
diff --git a/cpu/mcf5445x/interrupts.c b/cpu/mcf5445x/interrupts.c
index 9572a7bc3..85828a67b 100644
--- a/cpu/mcf5445x/interrupts.c
+++ b/cpu/mcf5445x/interrupts.c
@@ -31,7 +31,7 @@
 
 int interrupt_init(void)
 {
-	volatile int0_t *intp = (int0_t *) (CFG_INTR_BASE);
+	volatile int0_t *intp = (int0_t *) (CONFIG_SYS_INTR_BASE);
 
 	/* Make sure all interrupts are disabled */
 	intp->imrh0 |= 0xFFFFFFFF;
@@ -44,9 +44,9 @@ int interrupt_init(void)
 #if defined(CONFIG_MCFTMR)
 void dtimer_intr_setup(void)
 {
-	volatile int0_t *intp = (int0_t *) (CFG_INTR_BASE);
+	volatile int0_t *intp = (int0_t *) (CONFIG_SYS_INTR_BASE);
 
-	intp->icr0[CFG_TMRINTR_NO] = CFG_TMRINTR_PRI;
-	intp->imrh0 &= ~CFG_TMRINTR_MASK;
+	intp->icr0[CONFIG_SYS_TMRINTR_NO] = CONFIG_SYS_TMRINTR_PRI;
+	intp->imrh0 &= ~CONFIG_SYS_TMRINTR_MASK;
 }
 #endif
diff --git a/cpu/mcf5445x/pci.c b/cpu/mcf5445x/pci.c
index 039846928..c4a3b05ee 100644
--- a/cpu/mcf5445x/pci.c
+++ b/cpu/mcf5445x/pci.c
@@ -31,9 +31,9 @@
 
 #if defined(CONFIG_PCI)
 /* System RAM mapped over PCI */
-#define CFG_PCI_SYS_MEM_BUS	CFG_SDRAM_BASE
-#define CFG_PCI_SYS_MEM_PHYS	CFG_SDRAM_BASE
-#define CFG_PCI_SYS_MEM_SIZE	(1024 * 1024 * 1024)
+#define CONFIG_SYS_PCI_SYS_MEM_BUS	CONFIG_SYS_SDRAM_BASE
+#define CONFIG_SYS_PCI_SYS_MEM_PHYS	CONFIG_SYS_SDRAM_BASE
+#define CONFIG_SYS_PCI_SYS_MEM_SIZE	(1024 * 1024 * 1024)
 
 #define cfg_read(val, addr, type, op)		*val = op((type)(addr));
 #define cfg_write(val, addr, type, op)		op((type *)(addr), (val));
@@ -80,9 +80,9 @@ void pci_mcf5445x_init(struct pci_controller *hose)
 	pci->tcr1 |= PCI_TCR1_P;
 
 	/* Initiator windows */
-	pci->iw0btar = CFG_PCI_MEM_PHYS | (CFG_PCI_MEM_PHYS >> 16);
-	pci->iw1btar = CFG_PCI_IO_PHYS | (CFG_PCI_IO_PHYS >> 16);
-	pci->iw2btar = CFG_PCI_CFG_PHYS | (CFG_PCI_CFG_PHYS >> 16);
+	pci->iw0btar = CONFIG_SYS_PCI_MEM_PHYS | (CONFIG_SYS_PCI_MEM_PHYS >> 16);
+	pci->iw1btar = CONFIG_SYS_PCI_IO_PHYS | (CONFIG_SYS_PCI_IO_PHYS >> 16);
+	pci->iw2btar = CONFIG_SYS_PCI_CFG_PHYS | (CONFIG_SYS_PCI_CFG_PHYS >> 16);
 
 	pci->iwcr =
 	    PCI_IWCR_W0C_EN | PCI_IWCR_W1C_EN | PCI_IWCR_W1C_IO |
@@ -97,34 +97,34 @@ void pci_mcf5445x_init(struct pci_controller *hose)
 	pci->cr1 = PCI_CR1_CLS(8) | PCI_CR1_LTMR(0xF8);
 	pci->cr2 = 0;
 
-#ifdef CFG_PCI_BAR0
-	pci->bar0 = PCI_BAR_BAR0(CFG_PCI_BAR0);
-	pci->tbatr0 = CFG_PCI_TBATR0 | PCI_TBATR_EN;
+#ifdef CONFIG_SYS_PCI_BAR0
+	pci->bar0 = PCI_BAR_BAR0(CONFIG_SYS_PCI_BAR0);
+	pci->tbatr0 = CONFIG_SYS_PCI_TBATR0 | PCI_TBATR_EN;
 	barEn |= PCI_TCR2_B0E;
 #endif
-#ifdef CFG_PCI_BAR1
-	pci->bar1 = PCI_BAR_BAR1(CFG_PCI_BAR1);
-	pci->tbatr1 = CFG_PCI_TBATR1 | PCI_TBATR_EN;
+#ifdef CONFIG_SYS_PCI_BAR1
+	pci->bar1 = PCI_BAR_BAR1(CONFIG_SYS_PCI_BAR1);
+	pci->tbatr1 = CONFIG_SYS_PCI_TBATR1 | PCI_TBATR_EN;
 	barEn |= PCI_TCR2_B1E;
 #endif
-#ifdef CFG_PCI_BAR2
-	pci->bar2 = PCI_BAR_BAR2(CFG_PCI_BAR2);
-	pci->tbatr2 = CFG_PCI_TBATR2 | PCI_TBATR_EN;
+#ifdef CONFIG_SYS_PCI_BAR2
+	pci->bar2 = PCI_BAR_BAR2(CONFIG_SYS_PCI_BAR2);
+	pci->tbatr2 = CONFIG_SYS_PCI_TBATR2 | PCI_TBATR_EN;
 	barEn |= PCI_TCR2_B2E;
 #endif
-#ifdef CFG_PCI_BAR3
-	pci->bar3 = PCI_BAR_BAR3(CFG_PCI_BAR3);
-	pci->tbatr3 = CFG_PCI_TBATR3 | PCI_TBATR_EN;
+#ifdef CONFIG_SYS_PCI_BAR3
+	pci->bar3 = PCI_BAR_BAR3(CONFIG_SYS_PCI_BAR3);
+	pci->tbatr3 = CONFIG_SYS_PCI_TBATR3 | PCI_TBATR_EN;
 	barEn |= PCI_TCR2_B3E;
 #endif
-#ifdef CFG_PCI_BAR4
-	pci->bar4 = PCI_BAR_BAR4(CFG_PCI_BAR4);
-	pci->tbatr4 = CFG_PCI_TBATR4 | PCI_TBATR_EN;
+#ifdef CONFIG_SYS_PCI_BAR4
+	pci->bar4 = PCI_BAR_BAR4(CONFIG_SYS_PCI_BAR4);
+	pci->tbatr4 = CONFIG_SYS_PCI_TBATR4 | PCI_TBATR_EN;
 	barEn |= PCI_TCR2_B4E;
 #endif
-#ifdef CFG_PCI_BAR5
-	pci->bar5 = PCI_BAR_BAR5(CFG_PCI_BAR5);
-	pci->tbatr5 = CFG_PCI_TBATR5 | PCI_TBATR_EN;
+#ifdef CONFIG_SYS_PCI_BAR5
+	pci->bar5 = PCI_BAR_BAR5(CONFIG_SYS_PCI_BAR5);
+	pci->tbatr5 = CONFIG_SYS_PCI_TBATR5 | PCI_TBATR_EN;
 	barEn |= PCI_TCR2_B5E;
 #endif
 
@@ -138,20 +138,20 @@ void pci_mcf5445x_init(struct pci_controller *hose)
 	hose->first_busno = 0;
 	hose->last_busno = 0xff;
 
-	pci_set_region(hose->regions + 0, CFG_PCI_MEM_BUS, CFG_PCI_MEM_PHYS,
-		       CFG_PCI_MEM_SIZE, PCI_REGION_MEM);
+	pci_set_region(hose->regions + 0, CONFIG_SYS_PCI_MEM_BUS, CONFIG_SYS_PCI_MEM_PHYS,
+		       CONFIG_SYS_PCI_MEM_SIZE, PCI_REGION_MEM);
 
-	pci_set_region(hose->regions + 1, CFG_PCI_IO_BUS, CFG_PCI_IO_PHYS,
-		       CFG_PCI_IO_SIZE, PCI_REGION_IO);
+	pci_set_region(hose->regions + 1, CONFIG_SYS_PCI_IO_BUS, CONFIG_SYS_PCI_IO_PHYS,
+		       CONFIG_SYS_PCI_IO_SIZE, PCI_REGION_IO);
 
-	pci_set_region(hose->regions + 2, CFG_PCI_SYS_MEM_BUS,
-		       CFG_PCI_SYS_MEM_PHYS, CFG_PCI_SYS_MEM_SIZE,
+	pci_set_region(hose->regions + 2, CONFIG_SYS_PCI_SYS_MEM_BUS,
+		       CONFIG_SYS_PCI_SYS_MEM_PHYS, CONFIG_SYS_PCI_SYS_MEM_SIZE,
 		       PCI_REGION_MEM | PCI_REGION_MEMORY);
 
 	hose->region_count = 3;
 
 	hose->cfg_addr = &(pci->car);
-	hose->cfg_data = (volatile unsigned char *)CFG_PCI_CFG_BUS;
+	hose->cfg_data = (volatile unsigned char *)CONFIG_SYS_PCI_CFG_BUS;
 
 	pci_set_ops(hose, pci_read_cfg_byte, pci_read_cfg_word,
 		    pci_read_cfg_dword, pci_write_cfg_byte, pci_write_cfg_word,
diff --git a/cpu/mcf5445x/speed.c b/cpu/mcf5445x/speed.c
index 6711a1d7c..9c0c07733 100644
--- a/cpu/mcf5445x/speed.c
+++ b/cpu/mcf5445x/speed.c
@@ -94,7 +94,7 @@ int get_clocks(void)
 	u16 fbpll_mask;
 
 #ifdef CONFIG_M54455EVB
-	volatile u8 *cpld = (volatile u8 *)(CFG_CS2_BASE + 3);
+	volatile u8 *cpld = (volatile u8 *)(CONFIG_SYS_CS2_BASE + 3);
 #endif
 	u8 bootmode;
 
@@ -145,7 +145,7 @@ int get_clocks(void)
 
 	if (bootmode == 0) {
 		/* RCON mode */
-		vco = pPllmult[ccm->rcon & fbpll_mask] * CFG_INPUT_CLKSRC;
+		vco = pPllmult[ccm->rcon & fbpll_mask] * CONFIG_SYS_INPUT_CLKSRC;
 
 		if ((vco < CLOCK_PLL_FVCO_MIN) || (vco > CLOCK_PLL_FVCO_MAX)) {
 			/* invaild range, re-set in PCR */
@@ -154,7 +154,7 @@ int get_clocks(void)
 
 			j = (pll->pcr & 0xFF000000) >> 24;
 			for (i = j; i < 0xFF; i++) {
-				vco = i * CFG_INPUT_CLKSRC;
+				vco = i * CONFIG_SYS_INPUT_CLKSRC;
 				if (vco >= CLOCK_PLL_FVCO_MIN) {
 					bus = vco / temp;
 					if (bus <= CLOCK_PLL_FSYS_MIN - MHZ)
@@ -172,25 +172,25 @@ int get_clocks(void)
 		gd->vco_clk = vco;	/* Vco clock */
 	} else if (bootmode == 2) {
 		/* Normal mode */
-		vco =  ((pll->pcr & 0xFF000000) >> 24) * CFG_INPUT_CLKSRC;
+		vco =  ((pll->pcr & 0xFF000000) >> 24) * CONFIG_SYS_INPUT_CLKSRC;
 		if ((vco < CLOCK_PLL_FVCO_MIN) || (vco > CLOCK_PLL_FVCO_MAX)) {
 			/* Default value */
 			pcrvalue = (pll->pcr & 0x00FFFFFF);
 			pcrvalue |= pPllmult[ccm->ccr & fbpll_mask] << 24;
 			pll->pcr = pcrvalue;
-			vco =  ((pll->pcr & 0xFF000000) >> 24) * CFG_INPUT_CLKSRC;
+			vco =  ((pll->pcr & 0xFF000000) >> 24) * CONFIG_SYS_INPUT_CLKSRC;
 		}
 		gd->vco_clk = vco;	/* Vco clock */
 	} else if (bootmode == 3) {
 		/* serial mode */
-		vco =  ((pll->pcr & 0xFF000000) >> 24) * CFG_INPUT_CLKSRC;
+		vco =  ((pll->pcr & 0xFF000000) >> 24) * CONFIG_SYS_INPUT_CLKSRC;
 		gd->vco_clk = vco;	/* Vco clock */
 	}
 
 	if ((ccm->ccr & CCM_MISCCR_LIMP) == CCM_MISCCR_LIMP) {
 		/* Limp mode */
 	} else {
-		gd->inp_clk = CFG_INPUT_CLKSRC;	/* Input clock */
+		gd->inp_clk = CONFIG_SYS_INPUT_CLKSRC;	/* Input clock */
 
 		temp = (pll->pcr & PLL_PCR_OUTDIV1_MASK) + 1;
 		gd->cpu_clk = vco / temp;	/* cpu clock */
diff --git a/cpu/mcf5445x/start.S b/cpu/mcf5445x/start.S
index 2a6019bbf..d5a7f937f 100644
--- a/cpu/mcf5445x/start.S
+++ b/cpu/mcf5445x/start.S
@@ -22,6 +22,7 @@
  */
 
 #include <config.h>
+#include <timestamp.h>
 #include "version.h"
 
 #ifndef	 CONFIG_IDENT_STRING
@@ -29,9 +30,9 @@
 #endif
 
 /* last three long word reserved for cache status */
-#define CACR_STATUS	(CFG_INIT_RAM_ADDR+CFG_INIT_RAM_END-12)
-#define ICACHE_STATUS	(CFG_INIT_RAM_ADDR+CFG_INIT_RAM_END- 8)
-#define DCACHE_STATUS	(CFG_INIT_RAM_ADDR+CFG_INIT_RAM_END- 4)
+#define CACR_STATUS	(CONFIG_SYS_INIT_RAM_ADDR+CONFIG_SYS_INIT_RAM_END-12)
+#define ICACHE_STATUS	(CONFIG_SYS_INIT_RAM_ADDR+CONFIG_SYS_INIT_RAM_END- 8)
+#define DCACHE_STATUS	(CONFIG_SYS_INIT_RAM_ADDR+CONFIG_SYS_INIT_RAM_END- 4)
 
 #define _START	_start
 #define _FAULT	_fault
@@ -47,8 +48,8 @@
 	rte;
 
 #if defined(CONFIG_CF_SBF)
-#define ASM_DRAMINIT	(asm_dram_init - TEXT_BASE + CFG_INIT_RAM_ADDR)
-#define ASM_SBF_IMG_HDR	(asm_sbf_img_hdr - TEXT_BASE + CFG_INIT_RAM_ADDR)
+#define ASM_DRAMINIT	(asm_dram_init - TEXT_BASE + CONFIG_SYS_INIT_RAM_ADDR)
+#define ASM_SBF_IMG_HDR	(asm_sbf_img_hdr - TEXT_BASE + CONFIG_SYS_INIT_RAM_ADDR)
 #endif
 
 .text
@@ -149,18 +150,18 @@ asm_sbf_img_hdr:
 	.long	TEXT_BASE	/* image to be relocated at */
 
 asm_dram_init:
-	move.l	#(CFG_INIT_RAM_ADDR + CFG_INIT_RAM_CTRL), %d0
+	move.l	#(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_RAM_CTRL), %d0
 	movec	%d0, %RAMBAR1	/* init Rambar */
-	move.l	#(CFG_INIT_RAM_ADDR + CFG_INIT_SP_OFFSET), %sp
+	move.l	#(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET), %sp
 	clr.l %sp@-
 
 	/* Must disable global address */
 	move.l	#0xFC008000, %a1
-	move.l	#(CFG_CS0_BASE), (%a1)
+	move.l	#(CONFIG_SYS_CS0_BASE), (%a1)
 	move.l	#0xFC008008, %a1
-	move.l	#(CFG_CS0_CTRL), (%a1)
+	move.l	#(CONFIG_SYS_CS0_CTRL), (%a1)
 	move.l	#0xFC008004, %a1
-	move.l	#(CFG_CS0_MASK), (%a1)
+	move.l	#(CONFIG_SYS_CS0_MASK), (%a1)
 
 	/*
 	 * Dram Initialization
@@ -168,7 +169,7 @@ asm_dram_init:
 	 */
 	/* mscr sdram */
 	move.l	#0xFC0A4074, %a1
-	move.b	#(CFG_SDRAM_DRV_STRENGTH), (%a1)
+	move.b	#(CONFIG_SYS_SDRAM_DRV_STRENGTH), (%a1)
 	nop
 
 	/* SDRAM Chip 0 and 1 */
@@ -177,8 +178,8 @@ asm_dram_init:
 
 	/* calculate the size */
 	move.l	#0x13, %d1
-	move.l	#(CFG_SDRAM_SIZE), %d2
-#ifdef CFG_SDRAM_BASE1
+	move.l	#(CONFIG_SYS_SDRAM_SIZE), %d2
+#ifdef CONFIG_SYS_SDRAM_BASE1
 	lsr.l	#1, %d2
 #endif
 
@@ -189,20 +190,20 @@ dramsz_loop:
 	bne	dramsz_loop
 
 	/* SDRAM Chip 0 and 1 */
-	move.l	#(CFG_SDRAM_BASE), (%a1)
+	move.l	#(CONFIG_SYS_SDRAM_BASE), (%a1)
 	or.l	%d1, (%a1)
-#ifdef CFG_SDRAM_BASE1
-	move.l	#(CFG_SDRAM_BASE1), (%a2)
+#ifdef CONFIG_SYS_SDRAM_BASE1
+	move.l	#(CONFIG_SYS_SDRAM_BASE1), (%a2)
 	or.l	%d1, (%a2)
 #endif
 	nop
 
 	/* dram cfg1 and cfg2 */
 	move.l	#0xFC0B8008, %a1
-	move.l	#(CFG_SDRAM_CFG1), (%a1)
+	move.l	#(CONFIG_SYS_SDRAM_CFG1), (%a1)
 	nop
 	move.l	#0xFC0B800C, %a2
-	move.l	#(CFG_SDRAM_CFG2), (%a2)
+	move.l	#(CONFIG_SYS_SDRAM_CFG2), (%a2)
 	nop
 
 	move.l	#0xFC0B8000, %a1	/* Mode */
@@ -210,13 +211,13 @@ dramsz_loop:
 
 #ifdef CONFIG_M54455EVB
 	/* Issue PALL */
-	move.l	#(CFG_SDRAM_CTRL + 2), (%a2)
+	move.l	#(CONFIG_SYS_SDRAM_CTRL + 2), (%a2)
 	nop
 
 	/* Issue LEMR */
-	move.l	#(CFG_SDRAM_EMOD + 0x408), (%a1)
+	move.l	#(CONFIG_SYS_SDRAM_EMOD + 0x408), (%a1)
 	nop
-	move.l	#(CFG_SDRAM_MODE + 0x300), (%a1)
+	move.l	#(CONFIG_SYS_SDRAM_MODE + 0x300), (%a1)
 	nop
 
 	move.l	#1000, %d0
@@ -227,24 +228,24 @@ wait1000:
 #endif
 
 	/* Issue PALL */
-	move.l	#(CFG_SDRAM_CTRL + 2), (%a2)
+	move.l	#(CONFIG_SYS_SDRAM_CTRL + 2), (%a2)
 	nop
 
 	/* Perform two refresh cycles */
-	move.l	#(CFG_SDRAM_CTRL + 4), %d0
+	move.l	#(CONFIG_SYS_SDRAM_CTRL + 4), %d0
 	nop
 	move.l	%d0, (%a2)
 	move.l	%d0, (%a2)
 	nop
 
 #ifdef CONFIG_M54455EVB
-	move.l	#(CFG_SDRAM_MODE + 0x200), (%a1)
+	move.l	#(CONFIG_SYS_SDRAM_MODE + 0x200), (%a1)
 	nop
 #elif defined(CONFIG_M54451EVB)
 	/* Issue LEMR */
-	move.l	#(CFG_SDRAM_MODE), (%a2)
+	move.l	#(CONFIG_SYS_SDRAM_MODE), (%a2)
 	nop
-	move.l	#(CFG_SDRAM_EMOD), (%a2)
+	move.l	#(CONFIG_SYS_SDRAM_EMOD), (%a2)
 	nop
 #endif
 
@@ -254,7 +255,7 @@ wait500:
 	subq.l	#1, %d0
 	bne	wait500
 
-	move.l	#(CFG_SDRAM_CTRL), %d0
+	move.l	#(CONFIG_SYS_SDRAM_CTRL), %d0
 	and.l	#0x7FFFFFFF, %d0
 #ifdef CONFIG_M54455EVB
 	or.l	#0x10000c00, %d0
@@ -290,8 +291,8 @@ wait500:
 	move.l	(%a1)+, %d5
 	move.l	(%a1), %a4
 
-	move.l	#(CFG_INIT_RAM_ADDR + CFG_SBFHDR_DATA_OFFSET), %a0
-	move.l	#(CFG_SBFHDR_SIZE), %d4
+	move.l	#(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_SBFHDR_DATA_OFFSET), %a0
+	move.l	#(CONFIG_SYS_SBFHDR_SIZE), %d4
 
 	move.l	#0xFC05C02C, %a1	/* dspi status */
 
@@ -381,10 +382,10 @@ _start:
 	move.l	#TEXT_BASE, %d0
 	movec	%d0, %VBR
 #else
-	move.l	#CFG_FLASH_BASE, %d0
+	move.l	#CONFIG_SYS_FLASH_BASE, %d0
 	movec	%d0, %VBR
 
-	move.l	#(CFG_INIT_RAM_ADDR + CFG_INIT_RAM_CTRL), %d0
+	move.l	#(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_RAM_CTRL), %d0
 	movec	%d0, %RAMBAR1
 #endif
 
@@ -408,7 +409,7 @@ _start:
 
 	/* set stackpointer to end of internal ram to get some stackspace for
 	   the first c-code */
-	move.l	#(CFG_INIT_RAM_ADDR + CFG_INIT_SP_OFFSET), %sp
+	move.l	#(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET), %sp
 	clr.l %sp@-
 
 	move.l #__got_start, %a5	/* put relocation table address to a5 */
@@ -439,7 +440,7 @@ relocate_code:
 	move.l 12(%a6), %d0		/* Save copy of Global Data pointer */
 	move.l 16(%a6), %a0		/* Save copy of Destination Address */
 
-	move.l #CFG_MONITOR_BASE, %a1
+	move.l #CONFIG_SYS_MONITOR_BASE, %a1
 	move.l #__init_end, %a2
 	move.l %a0, %a3
 
@@ -454,7 +455,7 @@ relocate_code:
  * initialization, now running from RAM.
  */
 	move.l	%a0, %a1
-	add.l	#(in_ram - CFG_MONITOR_BASE), %a1
+	add.l	#(in_ram - CONFIG_SYS_MONITOR_BASE), %a1
 	jmp	(%a1)
 
 in_ram:
@@ -464,9 +465,9 @@ clear_bss:
 	 * Now clear BSS segment
 	 */
 	move.l	%a0, %a1
-	add.l	#(_sbss - CFG_MONITOR_BASE),%a1
+	add.l	#(_sbss - CONFIG_SYS_MONITOR_BASE),%a1
 	move.l	%a0, %d1
-	add.l	#(_ebss - CFG_MONITOR_BASE),%d1
+	add.l	#(_ebss - CONFIG_SYS_MONITOR_BASE),%d1
 6:
 	clr.l	(%a1)+
 	cmp.l	%a1,%d1
@@ -476,11 +477,11 @@ clear_bss:
 	 * fix got table in RAM
 	 */
 	move.l	%a0, %a1
-	add.l	#(__got_start - CFG_MONITOR_BASE),%a1
+	add.l	#(__got_start - CONFIG_SYS_MONITOR_BASE),%a1
 	move.l	%a1,%a5			/* * fix got pointer register a5 */
 
 	move.l	%a0, %a2
-	add.l	#(__got_end - CFG_MONITOR_BASE),%a2
+	add.l	#(__got_end - CONFIG_SYS_MONITOR_BASE),%a2
 
 7:
 	move.l	(%a1),%d1
@@ -492,7 +493,7 @@ clear_bss:
 
 	/* calculate relative jump to board_init_r in ram */
 	move.l %a0, %a1
-	add.l #(board_init_r - CFG_MONITOR_BASE), %a1
+	add.l #(board_init_r - CONFIG_SYS_MONITOR_BASE), %a1
 
 	/* set parameters for board_init_r */
 	move.l %a0,-(%sp)		/* dest_addr */
@@ -531,7 +532,7 @@ icache_enable:
 	move.l	#0x00040100, %d0	/* Invalidate icache */
 	movec	%d0, %CACR
 
-	move.l	#(CFG_SDRAM_BASE + 0x1c000), %d0	/* Setup icache */
+	move.l	#(CONFIG_SYS_SDRAM_BASE + 0x1c000), %d0	/* Setup icache */
 	movec	%d0, %ACR2
 
 	move.l	#0x04088020, %d0	/* Enable bcache and icache */
@@ -627,6 +628,6 @@ dcache_status:
 	.globl	version_string
 version_string:
 	.ascii U_BOOT_VERSION
-	.ascii " (", __DATE__, " - ", __TIME__, ")"
+	.ascii " (", U_BOOT_DATE, " - ", U_BOOT_TIME, ")"
 	.ascii CONFIG_IDENT_STRING, "\0"
 	.align 4
diff --git a/cpu/mcf547x_8x/cpu.c b/cpu/mcf547x_8x/cpu.c
index 1ba7aa80a..3912a74d5 100644
--- a/cpu/mcf547x_8x/cpu.c
+++ b/cpu/mcf547x_8x/cpu.c
@@ -28,6 +28,7 @@
 #include <common.h>
 #include <watchdog.h>
 #include <command.h>
+#include <netdev.h>
 
 #include <asm/immap.h>
 
@@ -95,10 +96,12 @@ int checkcpu(void)
 	}
 
 	if (id) {
+		char buf1[32], buf2[32];
+
 		printf("Freescale MCF%d\n", id);
-		printf("       CPU CLK %d Mhz BUS CLK %d Mhz\n",
-		       (int)(gd->cpu_clk / 1000000),
-		       (int)(gd->bus_clk / 1000000));
+		printf("       CPU CLK %s MHz BUS CLK %s MHz\n",
+		       strmhz(buf1, gd->cpu_clk),
+		       strmhz(buf2, gd->bus_clk));
 	}
 
 	return 0;
@@ -132,7 +135,7 @@ int watchdog_init(void)
 	volatile gptmr_t *gptmr = (gptmr_t *) (MMAP_GPTMR);
 
 	gptmr->pre = CONFIG_WATCHDOG_TIMEOUT;
-	gptmr->cnt = CFG_TIMER_PRESCALER * 1000;
+	gptmr->cnt = CONFIG_SYS_TIMER_PRESCALER * 1000;
 
 	gptmr->mode = GPT_TMS_SGPIO;
 	gptmr->ctrl = GPT_CTRL_CE | GPT_CTRL_WDEN;
@@ -148,9 +151,6 @@ int watchdog_init(void)
  * 	int board_eth_init(bd_t *bis)
  */
 
-extern int mcdmafec_initialize(bd_t *bis);
-extern int mcffec_initialize(bd_t*);
-
 int cpu_eth_init(bd_t *bis)
 {
 #if defined(CONFIG_FSLDMAFEC)
diff --git a/cpu/mcf547x_8x/cpu_init.c b/cpu/mcf547x_8x/cpu_init.c
index 11154c63a..1ba57835e 100644
--- a/cpu/mcf547x_8x/cpu_init.c
+++ b/cpu/mcf547x_8x/cpu_init.c
@@ -29,6 +29,12 @@
 #include <MCD_dma.h>
 #include <asm/immap.h>
 
+#if defined(CONFIG_CMD_NET)
+#include <config.h>
+#include <net.h>
+#include <asm/fsl_mcdmafec.h>
+#endif
+
 /*
  * Breath some life into the CPU...
  *
@@ -52,40 +58,40 @@ void cpu_init_f(void)
 	xlbarb->pri = 0;
 	xlbarb->prien = 0xff;
 
-#if (defined(CFG_CS0_BASE) && defined(CFG_CS0_MASK) && defined(CFG_CS0_CTRL))
-	fbcs->csar0 = CFG_CS0_BASE;
-	fbcs->cscr0 = CFG_CS0_CTRL;
-	fbcs->csmr0 = CFG_CS0_MASK;
+#if (defined(CONFIG_SYS_CS0_BASE) && defined(CONFIG_SYS_CS0_MASK) && defined(CONFIG_SYS_CS0_CTRL))
+	fbcs->csar0 = CONFIG_SYS_CS0_BASE;
+	fbcs->cscr0 = CONFIG_SYS_CS0_CTRL;
+	fbcs->csmr0 = CONFIG_SYS_CS0_MASK;
 #endif
 
-#if (defined(CFG_CS1_BASE) && defined(CFG_CS1_MASK) && defined(CFG_CS1_CTRL))
-	fbcs->csar1 = CFG_CS1_BASE;
-	fbcs->cscr1 = CFG_CS1_CTRL;
-	fbcs->csmr1 = CFG_CS1_MASK;
+#if (defined(CONFIG_SYS_CS1_BASE) && defined(CONFIG_SYS_CS1_MASK) && defined(CONFIG_SYS_CS1_CTRL))
+	fbcs->csar1 = CONFIG_SYS_CS1_BASE;
+	fbcs->cscr1 = CONFIG_SYS_CS1_CTRL;
+	fbcs->csmr1 = CONFIG_SYS_CS1_MASK;
 #endif
 
-#if (defined(CFG_CS2_BASE) && defined(CFG_CS2_MASK) && defined(CFG_CS2_CTRL))
-	fbcs->csar2 = CFG_CS2_BASE;
-	fbcs->cscr2 = CFG_CS2_CTRL;
-	fbcs->csmr2 = CFG_CS2_MASK;
+#if (defined(CONFIG_SYS_CS2_BASE) && defined(CONFIG_SYS_CS2_MASK) && defined(CONFIG_SYS_CS2_CTRL))
+	fbcs->csar2 = CONFIG_SYS_CS2_BASE;
+	fbcs->cscr2 = CONFIG_SYS_CS2_CTRL;
+	fbcs->csmr2 = CONFIG_SYS_CS2_MASK;
 #endif
 
-#if (defined(CFG_CS3_BASE) && defined(CFG_CS3_MASK) && defined(CFG_CS3_CTRL))
-	fbcs->csar3 = CFG_CS3_BASE;
-	fbcs->cscr3 = CFG_CS3_CTRL;
-	fbcs->csmr3 = CFG_CS3_MASK;
+#if (defined(CONFIG_SYS_CS3_BASE) && defined(CONFIG_SYS_CS3_MASK) && defined(CONFIG_SYS_CS3_CTRL))
+	fbcs->csar3 = CONFIG_SYS_CS3_BASE;
+	fbcs->cscr3 = CONFIG_SYS_CS3_CTRL;
+	fbcs->csmr3 = CONFIG_SYS_CS3_MASK;
 #endif
 
-#if (defined(CFG_CS4_BASE) && defined(CFG_CS4_MASK) && defined(CFG_CS4_CTRL))
-	fbcs->csar4 = CFG_CS4_BASE;
-	fbcs->cscr4 = CFG_CS4_CTRL;
-	fbcs->csmr4 = CFG_CS4_MASK;
+#if (defined(CONFIG_SYS_CS4_BASE) && defined(CONFIG_SYS_CS4_MASK) && defined(CONFIG_SYS_CS4_CTRL))
+	fbcs->csar4 = CONFIG_SYS_CS4_BASE;
+	fbcs->cscr4 = CONFIG_SYS_CS4_CTRL;
+	fbcs->csmr4 = CONFIG_SYS_CS4_MASK;
 #endif
 
-#if (defined(CFG_CS5_BASE) && defined(CFG_CS5_MASK) && defined(CFG_CS5_CTRL))
-	fbcs->csar5 = CFG_CS5_BASE;
-	fbcs->cscr5 = CFG_CS5_CTRL;
-	fbcs->csmr5 = CFG_CS5_MASK;
+#if (defined(CONFIG_SYS_CS5_BASE) && defined(CONFIG_SYS_CS5_MASK) && defined(CONFIG_SYS_CS5_CTRL))
+	fbcs->csar5 = CONFIG_SYS_CS5_BASE;
+	fbcs->cscr5 = CONFIG_SYS_CS5_CTRL;
+	fbcs->csmr5 = CONFIG_SYS_CS5_MASK;
 #endif
 
 #ifdef CONFIG_FSL_I2C
@@ -110,10 +116,10 @@ int cpu_init_r(void)
 void uart_port_conf(void)
 {
 	volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO;
-	volatile u8 *pscsicr = (u8 *) (CFG_UART_BASE + 0x40);
+	volatile u8 *pscsicr = (u8 *) (CONFIG_SYS_UART_BASE + 0x40);
 
 	/* Setup Ports: */
-	switch (CFG_UART_PORT) {
+	switch (CONFIG_SYS_UART_PORT) {
 	case 0:
 		gpio->par_psc0 = (GPIO_PAR_PSC0_TXD0 | GPIO_PAR_PSC0_RXD0);
 		break;
@@ -130,3 +136,24 @@ void uart_port_conf(void)
 
 	*pscsicr &= 0xF8;
 }
+
+#if defined(CONFIG_CMD_NET)
+int fecpin_setclear(struct eth_device *dev, int setclear)
+{
+	volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO;
+	struct fec_info_dma *info = (struct fec_info_dma *)dev->priv;
+
+	if (setclear) {
+		if (info->iobase == CONFIG_SYS_FEC0_IOBASE)
+			gpio->par_feci2cirq |= 0xF000;
+		else
+			gpio->par_feci2cirq |= 0x0FC0;
+	} else {
+		if (info->iobase == CONFIG_SYS_FEC0_IOBASE)
+			gpio->par_feci2cirq &= 0x0FFF;
+		else
+			gpio->par_feci2cirq &= 0xF03F;
+	}
+	return 0;
+}
+#endif
diff --git a/cpu/mcf547x_8x/interrupts.c b/cpu/mcf547x_8x/interrupts.c
index d684ffe9d..76be876aa 100644
--- a/cpu/mcf547x_8x/interrupts.c
+++ b/cpu/mcf547x_8x/interrupts.c
@@ -28,7 +28,7 @@
 
 int interrupt_init(void)
 {
-	volatile int0_t *intp = (int0_t *) (CFG_INTR_BASE);
+	volatile int0_t *intp = (int0_t *) (CONFIG_SYS_INTR_BASE);
 
 	/* Make sure all interrupts are disabled */
 	intp->imrh0 |= 0xFFFFFFFF;
@@ -42,9 +42,9 @@ int interrupt_init(void)
 #if defined(CONFIG_SLTTMR)
 void dtimer_intr_setup(void)
 {
-	volatile int0_t *intp = (int0_t *) (CFG_INTR_BASE);
+	volatile int0_t *intp = (int0_t *) (CONFIG_SYS_INTR_BASE);
 
-	intp->icr0[CFG_TMRINTR_NO] = CFG_TMRINTR_PRI;
-	intp->imrh0 &= ~CFG_TMRINTR_MASK;
+	intp->icr0[CONFIG_SYS_TMRINTR_NO] = CONFIG_SYS_TMRINTR_PRI;
+	intp->imrh0 &= ~CONFIG_SYS_TMRINTR_MASK;
 }
 #endif
diff --git a/cpu/mcf547x_8x/pci.c b/cpu/mcf547x_8x/pci.c
index 70378b09e..f5c25367f 100644
--- a/cpu/mcf547x_8x/pci.c
+++ b/cpu/mcf547x_8x/pci.c
@@ -31,9 +31,9 @@
 
 #if defined(CONFIG_PCI)
 /* System RAM mapped over PCI */
-#define CFG_PCI_SYS_MEM_BUS	CFG_SDRAM_BASE
-#define CFG_PCI_SYS_MEM_PHYS	CFG_SDRAM_BASE
-#define CFG_PCI_SYS_MEM_SIZE	(1024 * 1024 * 1024)
+#define CONFIG_SYS_PCI_SYS_MEM_BUS	CONFIG_SYS_SDRAM_BASE
+#define CONFIG_SYS_PCI_SYS_MEM_PHYS	CONFIG_SYS_SDRAM_BASE
+#define CONFIG_SYS_PCI_SYS_MEM_SIZE	(1024 * 1024 * 1024)
 
 #define cfg_read(val, addr, type, op)		*val = op((type)(addr));
 #define cfg_write(val, addr, type, op)		op((type *)(addr), (val));
@@ -107,9 +107,9 @@ void pci_mcf547x_8x_init(struct pci_controller *hose)
 	pci->tcr1 = PCI_TCR1_P;
 
 	/* Initiator windows */
-	pci->iw0btar = CFG_PCI_MEM_PHYS | (CFG_PCI_MEM_PHYS >> 16);
-	pci->iw1btar = CFG_PCI_IO_PHYS | (CFG_PCI_IO_PHYS >> 16);
-	pci->iw2btar = CFG_PCI_CFG_PHYS | (CFG_PCI_CFG_PHYS >> 16);
+	pci->iw0btar = CONFIG_SYS_PCI_MEM_PHYS | (CONFIG_SYS_PCI_MEM_PHYS >> 16);
+	pci->iw1btar = CONFIG_SYS_PCI_IO_PHYS | (CONFIG_SYS_PCI_IO_PHYS >> 16);
+	pci->iw2btar = CONFIG_SYS_PCI_CFG_PHYS | (CONFIG_SYS_PCI_CFG_PHYS >> 16);
 
 	pci->iwcr =
 	    PCI_IWCR_W0C_EN | PCI_IWCR_W1C_EN | PCI_IWCR_W1C_IO |
@@ -124,13 +124,13 @@ void pci_mcf547x_8x_init(struct pci_controller *hose)
 	pci->cr1 = PCI_CR1_CLS(8) | PCI_CR1_LTMR(0xF8);
 	pci->cr2 = 0;
 
-#ifdef CFG_PCI_BAR0
-	pci->bar0 = PCI_BAR_BAR0(CFG_PCI_BAR0);
-	pci->tbatr0a = CFG_PCI_TBATR0 | PCI_TBATR_EN;
+#ifdef CONFIG_SYS_PCI_BAR0
+	pci->bar0 = PCI_BAR_BAR0(CONFIG_SYS_PCI_BAR0);
+	pci->tbatr0a = CONFIG_SYS_PCI_TBATR0 | PCI_TBATR_EN;
 #endif
-#ifdef CFG_PCI_BAR1
-	pci->bar1 = PCI_BAR_BAR1(CFG_PCI_BAR1);
-	pci->tbatr1a = CFG_PCI_TBATR1 | PCI_TBATR_EN;
+#ifdef CONFIG_SYS_PCI_BAR1
+	pci->bar1 = PCI_BAR_BAR1(CONFIG_SYS_PCI_BAR1);
+	pci->tbatr1a = CONFIG_SYS_PCI_TBATR1 | PCI_TBATR_EN;
 #endif
 
 	/* Deassert reset bit */
@@ -141,20 +141,20 @@ void pci_mcf547x_8x_init(struct pci_controller *hose)
 	hose->first_busno = 0;
 	hose->last_busno = 0xff;
 
-	pci_set_region(hose->regions + 0, CFG_PCI_MEM_BUS, CFG_PCI_MEM_PHYS,
-		       CFG_PCI_MEM_SIZE, PCI_REGION_MEM);
+	pci_set_region(hose->regions + 0, CONFIG_SYS_PCI_MEM_BUS, CONFIG_SYS_PCI_MEM_PHYS,
+		       CONFIG_SYS_PCI_MEM_SIZE, PCI_REGION_MEM);
 
-	pci_set_region(hose->regions + 1, CFG_PCI_IO_BUS, CFG_PCI_IO_PHYS,
-		       CFG_PCI_IO_SIZE, PCI_REGION_IO);
+	pci_set_region(hose->regions + 1, CONFIG_SYS_PCI_IO_BUS, CONFIG_SYS_PCI_IO_PHYS,
+		       CONFIG_SYS_PCI_IO_SIZE, PCI_REGION_IO);
 
-	pci_set_region(hose->regions + 2, CFG_PCI_SYS_MEM_BUS,
-		       CFG_PCI_SYS_MEM_PHYS, CFG_PCI_SYS_MEM_SIZE,
+	pci_set_region(hose->regions + 2, CONFIG_SYS_PCI_SYS_MEM_BUS,
+		       CONFIG_SYS_PCI_SYS_MEM_PHYS, CONFIG_SYS_PCI_SYS_MEM_SIZE,
 		       PCI_REGION_MEM | PCI_REGION_MEMORY);
 
 	hose->region_count = 3;
 
 	hose->cfg_addr = &(pci->car);
-	hose->cfg_data = (volatile unsigned char *)CFG_PCI_CFG_BUS;
+	hose->cfg_data = (volatile unsigned char *)CONFIG_SYS_PCI_CFG_BUS;
 
 	pci_set_ops(hose, pci_read_cfg_byte, pci_read_cfg_word,
 		    pci_read_cfg_dword, pci_write_cfg_byte, pci_write_cfg_word,
diff --git a/cpu/mcf547x_8x/slicetimer.c b/cpu/mcf547x_8x/slicetimer.c
index 494f98f66..67e81894a 100644
--- a/cpu/mcf547x_8x/slicetimer.c
+++ b/cpu/mcf547x_8x/slicetimer.c
@@ -31,22 +31,22 @@ DECLARE_GLOBAL_DATA_PTR;
 static ulong timestamp;
 
 #if defined(CONFIG_SLTTMR)
-#ifndef CFG_UDELAY_BASE
+#ifndef CONFIG_SYS_UDELAY_BASE
 #	error	"uDelay base not defined!"
 #endif
 
-#if !defined(CFG_TMR_BASE) || !defined(CFG_INTR_BASE) || !defined(CFG_TMRINTR_NO) || !defined(CFG_TMRINTR_MASK)
+#if !defined(CONFIG_SYS_TMR_BASE) || !defined(CONFIG_SYS_INTR_BASE) || !defined(CONFIG_SYS_TMRINTR_NO) || !defined(CONFIG_SYS_TMRINTR_MASK)
 #	error	"TMR_BASE, INTR_BASE, TMRINTR_NO or TMRINTR_MASk not defined!"
 #endif
 extern void dtimer_intr_setup(void);
 
 void udelay(unsigned long usec)
 {
-	volatile slt_t *timerp = (slt_t *) (CFG_UDELAY_BASE);
+	volatile slt_t *timerp = (slt_t *) (CONFIG_SYS_UDELAY_BASE);
 	u32 now, freq;
 
 	/* 1 us period */
-	freq = CFG_TIMER_PRESCALER;
+	freq = CONFIG_SYS_TIMER_PRESCALER;
 
 	timerp->cr = 0;		/* Disable */
 	timerp->tcnt = usec * freq;
@@ -62,10 +62,10 @@ void udelay(unsigned long usec)
 
 void dtimer_interrupt(void *not_used)
 {
-	volatile slt_t *timerp = (slt_t *) (CFG_TMR_BASE);
+	volatile slt_t *timerp = (slt_t *) (CONFIG_SYS_TMR_BASE);
 
 	/* check for timer interrupt asserted */
-	if ((CFG_TMRPND_REG & CFG_TMRINTR_MASK) == CFG_TMRINTR_PEND) {
+	if ((CONFIG_SYS_TMRPND_REG & CONFIG_SYS_TMRINTR_MASK) == CONFIG_SYS_TMRINTR_PEND) {
 		timerp->sr |= SLT_SR_ST;
 		timestamp++;
 		return;
@@ -74,7 +74,7 @@ void dtimer_interrupt(void *not_used)
 
 void timer_init(void)
 {
-	volatile slt_t *timerp = (slt_t *) (CFG_TMR_BASE);
+	volatile slt_t *timerp = (slt_t *) (CONFIG_SYS_TMR_BASE);
 
 	timestamp = 0;
 
@@ -83,10 +83,10 @@ void timer_init(void)
 	timerp->sr = SLT_SR_BE | SLT_SR_ST;	/* clear status */
 
 	/* initialize and enable timer interrupt */
-	irq_install_handler(CFG_TMRINTR_NO, dtimer_interrupt, 0);
+	irq_install_handler(CONFIG_SYS_TMRINTR_NO, dtimer_interrupt, 0);
 
 	/* Interrupt every ms */
-	timerp->tcnt = 1000 * CFG_TIMER_PRESCALER;
+	timerp->tcnt = 1000 * CONFIG_SYS_TIMER_PRESCALER;
 
 	dtimer_intr_setup();
 
diff --git a/cpu/mcf547x_8x/speed.c b/cpu/mcf547x_8x/speed.c
index 28fe65729..2cee4887a 100644
--- a/cpu/mcf547x_8x/speed.c
+++ b/cpu/mcf547x_8x/speed.c
@@ -37,7 +37,7 @@ int get_clocks(void)
 {
 	DECLARE_GLOBAL_DATA_PTR;
 
-	gd->bus_clk = CFG_CLK;
+	gd->bus_clk = CONFIG_SYS_CLK;
 	gd->cpu_clk = (gd->bus_clk * 2);
 
 #ifdef CONFIG_FSL_I2C
diff --git a/cpu/mcf547x_8x/start.S b/cpu/mcf547x_8x/start.S
index 87355f958..94ef14bf3 100644
--- a/cpu/mcf547x_8x/start.S
+++ b/cpu/mcf547x_8x/start.S
@@ -22,6 +22,7 @@
  */
 
 #include <config.h>
+#include <timestamp.h>
 #include "version.h"
 
 #ifndef	 CONFIG_IDENT_STRING
@@ -29,9 +30,9 @@
 #endif
 
 /* last three long word reserved for cache status */
-#define ICACHE_STATUS	(CFG_INIT_RAM_ADDR+CFG_INIT_RAM_END- 4)
-#define DCACHE_STATUS	(CFG_INIT_RAM_ADDR+CFG_INIT_RAM_END- 8)
-#define CACR_STATUS	(CFG_INIT_RAM_ADDR+CFG_INIT_RAM_END-12)
+#define ICACHE_STATUS	(CONFIG_SYS_INIT_RAM_ADDR+CONFIG_SYS_INIT_RAM_END- 4)
+#define DCACHE_STATUS	(CONFIG_SYS_INIT_RAM_ADDR+CONFIG_SYS_INIT_RAM_END- 8)
+#define CACR_STATUS	(CONFIG_SYS_INIT_RAM_ADDR+CONFIG_SYS_INIT_RAM_END-12)
 
 #define _START	_start
 #define _FAULT	_fault
@@ -132,16 +133,16 @@ _start:
 	move.w #0x2700,%sr		/* Mask off Interrupt */
 
 	/* Set vector base register at the beginning of the Flash */
-	move.l	#CFG_FLASH_BASE, %d0
+	move.l	#CONFIG_SYS_FLASH_BASE, %d0
 	movec	%d0, %VBR
 
-	move.l	#(CFG_INIT_RAM_ADDR + CFG_INIT_RAM_CTRL), %d0
+	move.l	#(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_RAM_CTRL), %d0
 	movec	%d0, %RAMBAR0
 
-	move.l	#(CFG_INIT_RAM1_ADDR + CFG_INIT_RAM1_CTRL), %d0
+	move.l	#(CONFIG_SYS_INIT_RAM1_ADDR + CONFIG_SYS_INIT_RAM1_CTRL), %d0
 	movec	%d0, %RAMBAR1
 
-	move.l	#CFG_MBAR, %d0		/* set MBAR address */
+	move.l	#CONFIG_SYS_MBAR, %d0		/* set MBAR address */
 	move.c	%d0, %MBAR
 
 	/* invalidate and disable cache */
@@ -164,7 +165,7 @@ _start:
 
 	/* set stackpointer to end of internal ram to get some stackspace for the
 	   first c-code */
-	move.l	#(CFG_INIT_RAM_ADDR + CFG_INIT_SP_OFFSET), %sp
+	move.l	#(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET), %sp
 	clr.l %sp@-
 
 	move.l #__got_start, %a5	/* put relocation table address to a5 */
@@ -195,7 +196,7 @@ relocate_code:
 	move.l 12(%a6), %d0		/* Save copy of Global Data pointer */
 	move.l 16(%a6), %a0		/* Save copy of Destination Address */
 
-	move.l #CFG_MONITOR_BASE, %a1
+	move.l #CONFIG_SYS_MONITOR_BASE, %a1
 	move.l #__init_end, %a2
 	move.l %a0, %a3
 
@@ -210,7 +211,7 @@ relocate_code:
  * initialization, now running from RAM.
  */
 	move.l	%a0, %a1
-	add.l	#(in_ram - CFG_MONITOR_BASE), %a1
+	add.l	#(in_ram - CONFIG_SYS_MONITOR_BASE), %a1
 	jmp	(%a1)
 
 in_ram:
@@ -220,9 +221,9 @@ clear_bss:
 	 * Now clear BSS segment
 	 */
 	move.l	%a0, %a1
-	add.l	#(_sbss - CFG_MONITOR_BASE),%a1
+	add.l	#(_sbss - CONFIG_SYS_MONITOR_BASE),%a1
 	move.l	%a0, %d1
-	add.l	#(_ebss - CFG_MONITOR_BASE),%d1
+	add.l	#(_ebss - CONFIG_SYS_MONITOR_BASE),%d1
 6:
 	clr.l	(%a1)+
 	cmp.l	%a1,%d1
@@ -232,11 +233,11 @@ clear_bss:
 	 * fix got table in RAM
 	 */
 	move.l	%a0, %a1
-	add.l	#(__got_start - CFG_MONITOR_BASE),%a1
+	add.l	#(__got_start - CONFIG_SYS_MONITOR_BASE),%a1
 	move.l	%a1,%a5		/* * fix got pointer register a5 */
 
 	move.l	%a0, %a2
-	add.l	#(__got_end - CFG_MONITOR_BASE),%a2
+	add.l	#(__got_end - CONFIG_SYS_MONITOR_BASE),%a2
 
 7:
 	move.l	(%a1),%d1
@@ -248,7 +249,7 @@ clear_bss:
 
 	/* calculate relative jump to board_init_r in ram */
 	move.l %a0, %a1
-	add.l #(board_init_r - CFG_MONITOR_BASE), %a1
+	add.l #(board_init_r - CONFIG_SYS_MONITOR_BASE), %a1
 
 	/* set parameters for board_init_r */
 	move.l %a0,-(%sp)		/* dest_addr */
@@ -281,7 +282,7 @@ _int_handler:
 /* cache functions */
 	.globl	icache_enable
 icache_enable:
-	move.l	#(CFG_SDRAM_BASE + 0x1c000), %d0
+	move.l	#(CONFIG_SYS_SDRAM_BASE + 0x1c000), %d0
 	movec	%d0, %ACR2			/* Enable cache */
 
 	move.l	#0x020C8100, %d0		/* Setup cache mask */
@@ -322,7 +323,7 @@ icache_status:
 dcache_enable:
 	bsr	icache_disable
 
-	move.l	#(CFG_SDRAM_BASE + 0xc000), %d0
+	move.l	#(CONFIG_SYS_SDRAM_BASE + 0xc000), %d0
 	movec	%d0, %ACR0			/* Enable cache */
 
 	move.l	#0xA30C8100, %d0		/* Invalidate cache cmd */
@@ -357,6 +358,6 @@ dcache_status:
 	.globl	version_string
 version_string:
 	.ascii U_BOOT_VERSION
-	.ascii " (", __DATE__, " - ", __TIME__, ")"
+	.ascii " (", U_BOOT_DATE, " - ", U_BOOT_TIME, ")"
 	.ascii CONFIG_IDENT_STRING, "\0"
 	.align 4
diff --git a/cpu/microblaze/exception.c b/cpu/microblaze/exception.c
index d76b05a52..0365de3a0 100644
--- a/cpu/microblaze/exception.c
+++ b/cpu/microblaze/exception.c
@@ -65,7 +65,7 @@ void _hw_exception_handler (void)
 	hang ();
 }
 
-#ifdef CFG_USR_EXCEP
+#ifdef CONFIG_SYS_USR_EXCEP
 void _exception_handler (void)
 {
 	puts ("User vector_exception\n");
diff --git a/cpu/microblaze/interrupts.c b/cpu/microblaze/interrupts.c
index 26e88cb51..a6021c99c 100644
--- a/cpu/microblaze/interrupts.c
+++ b/cpu/microblaze/interrupts.c
@@ -45,19 +45,19 @@ int disable_interrupts (void)
 	return 0;
 }
 
-#ifdef CFG_INTC_0
-#ifdef CFG_TIMER_0
+#ifdef CONFIG_SYS_INTC_0
+#ifdef CONFIG_SYS_TIMER_0
 extern void timer_init (void);
 #endif
-#ifdef CFG_FSL_2
+#ifdef CONFIG_SYS_FSL_2
 extern void fsl_init2 (void);
 #endif
 
 
-static struct irq_action vecs[CFG_INTC_0_NUM];
+static struct irq_action vecs[CONFIG_SYS_INTC_0_NUM];
 
 /* mapping structure to interrupt controller */
-microblaze_intc_t *intc = (microblaze_intc_t *) (CFG_INTC_0_ADDR);
+microblaze_intc_t *intc = (microblaze_intc_t *) (CONFIG_SYS_INTC_0_ADDR);
 
 /* default handler */
 void def_hdlr (void)
@@ -100,7 +100,7 @@ void install_interrupt_handler (int irq, interrupt_handler_t * hdlr, void *arg)
 {
 	struct irq_action *act;
 	/* irq out of range */
-	if ((irq < 0) || (irq > CFG_INTC_0_NUM)) {
+	if ((irq < 0) || (irq > CONFIG_SYS_INTC_0_NUM)) {
 		puts ("IRQ out of range\n");
 		return;
 	}
@@ -135,17 +135,17 @@ int interrupts_init (void)
 {
 	int i;
 	/* initialize irq list */
-	for (i = 0; i < CFG_INTC_0_NUM; i++) {
+	for (i = 0; i < CONFIG_SYS_INTC_0_NUM; i++) {
 		vecs[i].handler = (interrupt_handler_t *) def_hdlr;
 		vecs[i].arg = (void *)i;
 		vecs[i].count = 0;
 	}
 	/* initialize intc controller */
 	intc_init ();
-#ifdef CFG_TIMER_0
+#ifdef CONFIG_SYS_TIMER_0
 	timer_init ();
 #endif
-#ifdef CFG_FSL_2
+#ifdef CONFIG_SYS_FSL_2
 	fsl_init2 ();
 #endif
 	enable_interrupts ();
@@ -191,7 +191,7 @@ void interrupt_handler (void)
 #endif
 
 #if defined(CONFIG_CMD_IRQ)
-#ifdef CFG_INTC_0
+#ifdef CONFIG_SYS_INTC_0
 int do_irqinfo (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
 {
 	int i;
@@ -201,7 +201,7 @@ int do_irqinfo (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
 	      "Nr  Routine   Arg       Count\n"
 	      "-----------------------------\n");
 
-	for (i = 0; i < CFG_INTC_0_NUM; i++) {
+	for (i = 0; i < CONFIG_SYS_INTC_0_NUM; i++) {
 		if (act->handler != (interrupt_handler_t*) def_hdlr) {
 			printf ("%02d  %08x  %08x  %d\n", i,
 				(int)act->handler, (int)act->arg, act->count);
diff --git a/cpu/microblaze/start.S b/cpu/microblaze/start.S
index 8740284ad..2e9a08dc5 100644
--- a/cpu/microblaze/start.S
+++ b/cpu/microblaze/start.S
@@ -30,7 +30,7 @@
 	.global _start
 _start:
 	mts	rmsr, r0	/* disable cache */
-	addi	r1, r0, CFG_INIT_SP_OFFSET
+	addi	r1, r0, CONFIG_SYS_INIT_SP_OFFSET
 	addi	r1, r1, -4	/* Decrement SP to top of memory */
 	/* add opcode instruction for 32bit jump - 2 instruction imm & brai*/
 	addi	r6, r0, 0xb0000000	/* hex b000 opcode imm */
@@ -45,9 +45,9 @@ _start:
 	swi	r6, r0, 0x14	/* interrupt */
 	swi	r6, r0, 0x24	/* hardware exception */
 
-#ifdef CFG_RESET_ADDRESS
+#ifdef CONFIG_SYS_RESET_ADDRESS
 	/* reset address */
-	addik	r6, r0, CFG_RESET_ADDRESS
+	addik	r6, r0, CONFIG_SYS_RESET_ADDRESS
 	sw	r6, r1, r0
 	lhu	r7, r1, r0
 	shi	r7, r0, 0x2
@@ -56,11 +56,11 @@ _start:
  * Copy U-Boot code to TEXT_BASE
  * solve problem with sbrk_base
  */
-#if (CFG_RESET_ADDRESS != TEXT_BASE)
+#if (CONFIG_SYS_RESET_ADDRESS != TEXT_BASE)
 	addi	r4, r0, __end
 	addi	r5, r0, __text_start
 	rsub	r4, r5, r4	/* size = __end - __text_start */
-	addi	r6, r0, CFG_RESET_ADDRESS	/* source address */
+	addi	r6, r0, CONFIG_SYS_RESET_ADDRESS	/* source address */
 	addi	r7, r0, 0	/* counter */
 4:
 	lw	r8, r6, r7
@@ -71,7 +71,7 @@ _start:
 #endif
 #endif
 
-#ifdef CFG_USR_EXCEP
+#ifdef CONFIG_SYS_USR_EXCEP
 	/* user_vector_exception */
 	addik	r6, r0, _exception_handler
 	sw	r6, r1, r0
@@ -80,7 +80,7 @@ _start:
 	shi	r6, r0, 0xe
 #endif
 
-#ifdef CFG_INTC_0
+#ifdef CONFIG_SYS_INTC_0
 	/* interrupt_handler */
 	addik	r6, r0, _interrupt_handler
 	sw	r6, r1, r0
diff --git a/cpu/microblaze/timer.c b/cpu/microblaze/timer.c
index b35045344..a91eabc64 100644
--- a/cpu/microblaze/timer.c
+++ b/cpu/microblaze/timer.c
@@ -33,7 +33,7 @@ void reset_timer (void)
 	timestamp = 0;
 }
 
-#ifdef CFG_TIMER_0
+#ifdef CONFIG_SYS_TIMER_0
 ulong get_timer (ulong base)
 {
 	return (timestamp - base);
@@ -50,9 +50,9 @@ void set_timer (ulong t)
 	timestamp = t;
 }
 
-#ifdef CFG_INTC_0
-#ifdef CFG_TIMER_0
-microblaze_timer_t *tmr = (microblaze_timer_t *) (CFG_TIMER_0_ADDR);
+#ifdef CONFIG_SYS_INTC_0
+#ifdef CONFIG_SYS_TIMER_0
+microblaze_timer_t *tmr = (microblaze_timer_t *) (CONFIG_SYS_TIMER_0_ADDR);
 
 void timer_isr (void *arg)
 {
@@ -62,12 +62,12 @@ void timer_isr (void *arg)
 
 void timer_init (void)
 {
-	tmr->loadreg = CFG_TIMER_0_PRELOAD;
+	tmr->loadreg = CONFIG_SYS_TIMER_0_PRELOAD;
 	tmr->control = TIMER_INTERRUPT | TIMER_RESET;
 	tmr->control =
 	    TIMER_ENABLE | TIMER_ENABLE_INTR | TIMER_RELOAD | TIMER_DOWN_COUNT;
 	reset_timer ();
-	install_interrupt_handler (CFG_TIMER_0_IRQ, timer_isr, (void *)tmr);
+	install_interrupt_handler (CONFIG_SYS_TIMER_0_IRQ, timer_isr, (void *)tmr);
 }
 #endif
 #endif
diff --git a/cpu/mips/au1x00_eth.c b/cpu/mips/au1x00_eth.c
index d0cf8e0c1..6272a3aac 100644
--- a/cpu/mips/au1x00_eth.c
+++ b/cpu/mips/au1x00_eth.c
@@ -23,7 +23,7 @@
  */
 #include <config.h>
 
-#if defined(CFG_DISCOVER_PHY)
+#if defined(CONFIG_SYS_DISCOVER_PHY)
 #error "PHY not supported yet"
 /* We just assume that we are running 100FD for now */
 /* We all use switches, right? ;-) */
@@ -283,7 +283,7 @@ int au1x00_enet_initialize(bd_t *bis){
 
 	if ((dev = (struct eth_device*)malloc(sizeof *dev)) == NULL) {
 		puts ("malloc failed\n");
-		return 0;
+		return -1;
 	}
 
 	memset(dev, 0, sizeof *dev);
diff --git a/cpu/mips/au1x00_serial.c b/cpu/mips/au1x00_serial.c
index e8baab5b1..c25ba5a5b 100644
--- a/cpu/mips/au1x00_serial.c
+++ b/cpu/mips/au1x00_serial.c
@@ -76,7 +76,7 @@ void serial_setbrg (void)
 	sd = (*sys_powerctrl & 0x03) + 2;
 
 	/* calulate 2x baudrate and round */
-	divisorx2 = ((CFG_MIPS_TIMER_FREQ/(sd * 16 * CONFIG_BAUDRATE)));
+	divisorx2 = ((CONFIG_SYS_MIPS_TIMER_FREQ/(sd * 16 * CONFIG_BAUDRATE)));
 
 	if (divisorx2 & 0x01)
 		divisorx2 = divisorx2 + 1;
diff --git a/cpu/mips/au1x00_usb_ohci.c b/cpu/mips/au1x00_usb_ohci.c
index 1ca8aafbb..17489da8d 100644
--- a/cpu/mips/au1x00_usb_ohci.c
+++ b/cpu/mips/au1x00_usb_ohci.c
@@ -654,7 +654,8 @@ static void td_fill (ohci_t *ohci, unsigned int info,
 	td->index = index;
 	td->data = (__u32)data;
 #ifdef OHCI_FILL_TRACE
-	if (1 || ((usb_pipetype(urb_priv->pipe) == PIPE_BULK) && usb_pipeout(urb_priv->pipe))) {
+	if (1 || (usb_pipebulk(urb_priv->pipe) &&
+				usb_pipeout(urb_priv->pipe))) {
 		for (i = 0; i < len; i++)
 		printf("td->data[%d] %#2x\n",i, ((unsigned char *)(td->data+0x80000000))[i]);
 	}
@@ -758,7 +759,7 @@ static void dl_transfer_length(td_t * td)
 	tdCBP  = m32_swap (td->hwCBP);
 
 
-	if (!(usb_pipetype (lurb_priv->pipe) == PIPE_CONTROL &&
+	if (!(usb_pipecontrol(lurb_priv->pipe) &&
 	    ((td->index == 0) || (td->index == lurb_priv->length - 1)))) {
 		if (tdBE != 0) {
 			if (td->hwCBP == 0)
@@ -1015,7 +1016,7 @@ pkt_print(dev, pipe, buffer, transfer_len, cmd, "SUB(rh)", usb_pipein(pipe));
 #else
 	wait_ms(1);
 #endif
-	if ((pipe & PIPE_INTERRUPT) == PIPE_INTERRUPT) {
+	if (usb_pipeint(pipe)) {
 		info("Root-Hub submit IRQ: NOT implemented");
 		return 0;
 	}
@@ -1249,7 +1250,7 @@ int submit_common_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
 
 	/* allow more time for a BULK device to react - some are slow */
 #define BULK_TO	 5000	/* timeout in milliseconds */
-	if (usb_pipetype (pipe) == PIPE_BULK)
+	if (usb_pipebulk(pipe))
 		timeout = BULK_TO;
 	else
 		timeout = 100;
diff --git a/cpu/mips/cache.S b/cpu/mips/cache.S
index ee5d411e4..ff4f11cf7 100644
--- a/cpu/mips/cache.S
+++ b/cpu/mips/cache.S
@@ -208,9 +208,9 @@ LEAF(mips_init_dcache)
 */
 NESTED(mips_cache_reset, 0, ra)
 	move	RA, ra
-	li	t2, CFG_ICACHE_SIZE
-	li	t3, CFG_DCACHE_SIZE
-	li	t4, CFG_CACHELINE_SIZE
+	li	t2, CONFIG_SYS_ICACHE_SIZE
+	li	t3, CONFIG_SYS_DCACHE_SIZE
+	li	t4, CONFIG_SYS_CACHELINE_SIZE
 	move	t5, t4
 
 	li	v0, MIPS_MAX_CACHE_SIZE
@@ -302,7 +302,7 @@ LEAF(dcache_enable)
 	jr	ra
 	END(dcache_enable)
 
-#ifdef CFG_INIT_RAM_LOCK_MIPS
+#ifdef CONFIG_SYS_INIT_RAM_LOCK_MIPS
 /*******************************************************************************
 *
 * mips_cache_lock - lock RAM area pointed to by a0 in cache.
@@ -311,9 +311,9 @@ LEAF(dcache_enable)
 *
 */
 #if defined(CONFIG_PURPLE)
-# define	CACHE_LOCK_SIZE	(CFG_DCACHE_SIZE/2)
+# define	CACHE_LOCK_SIZE	(CONFIG_SYS_DCACHE_SIZE/2)
 #else
-# define	CACHE_LOCK_SIZE	(CFG_DCACHE_SIZE)
+# define	CACHE_LOCK_SIZE	(CONFIG_SYS_DCACHE_SIZE)
 #endif
 	.globl	mips_cache_lock
 	.ent	mips_cache_lock
@@ -321,11 +321,11 @@ mips_cache_lock:
 	li	a1, CKSEG0 - CACHE_LOCK_SIZE
 	addu	a0, a1
 	li	a2, CACHE_LOCK_SIZE
-	li	a3, CFG_CACHELINE_SIZE
+	li	a3, CONFIG_SYS_CACHELINE_SIZE
 	move	a1, a2
 	icacheop(a0,a1,a2,a3,0x1d)
 
 	jr	ra
 
 	.end	mips_cache_lock
-#endif /* CFG_INIT_RAM_LOCK_MIPS */
+#endif /* CONFIG_SYS_INIT_RAM_LOCK_MIPS */
diff --git a/cpu/mips/cpu.c b/cpu/mips/cpu.c
index 0f58d25b8..b7180b0c6 100644
--- a/cpu/mips/cpu.c
+++ b/cpu/mips/cpu.c
@@ -23,6 +23,7 @@
 
 #include <common.h>
 #include <command.h>
+#include <netdev.h>
 #include <asm/mipsregs.h>
 #include <asm/cacheops.h>
 #include <asm/reboot.h>
@@ -51,7 +52,7 @@ int do_reset(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 
 void flush_cache(ulong start_addr, ulong size)
 {
-	unsigned long lsize = CFG_CACHELINE_SIZE;
+	unsigned long lsize = CONFIG_SYS_CACHELINE_SIZE;
 	unsigned long addr = start_addr & ~(lsize - 1);
 	unsigned long aend = (start_addr + size - 1) & ~(lsize - 1);
 
@@ -73,3 +74,11 @@ void write_one_tlb(int index, u32 pagemask, u32 hi, u32 low0, u32 low1)
 	write_c0_index(index);
 	tlb_write_indexed();
 }
+
+int cpu_eth_init(bd_t *bis)
+{
+#ifdef CONFIG_SOC_AU1X00
+	au1x00_enet_initialize(bis);
+#endif
+	return 0;
+}
diff --git a/cpu/mips/incaip_clock.c b/cpu/mips/incaip_clock.c
index d0515ca67..fc2c62180 100644
--- a/cpu/mips/incaip_clock.c
+++ b/cpu/mips/incaip_clock.c
@@ -33,8 +33,8 @@
 *
 * RETURNS:
 *          150.000.000 for 150 MHz
-*          133.333.333 for 133 Mhz (= 400MHz/3)
-*          100.000.000 for 100 Mhz (= 400MHz/4)
+*          133.333.333 for 133 MHz (= 400MHz/3)
+*          100.000.000 for 100 MHz (= 400MHz/4)
 * NOTE:
 *   This functions should be used by the hardware driver to get the correct
 *   frequency of the CPU. Don't use the macros, which are set to init the CPU
diff --git a/cpu/mips/start.S b/cpu/mips/start.S
index 09e4aab25..57db589b9 100644
--- a/cpu/mips/start.S
+++ b/cpu/mips/start.S
@@ -243,9 +243,11 @@ reset:
 	mtc0	zero, CP0_COUNT
 	mtc0	zero, CP0_COMPARE
 
+#if !defined(CONFIG_SKIP_LOWLEVEL_INIT)
 	/* CONFIG0 register */
 	li	t0, CONF_CM_UNCACHED
 	mtc0	t0, CP0_CONFIG
+#endif /* !CONFIG_SKIP_LOWLEVEL_INIT */
 
 	/* Initialize $gp.
 	 */
@@ -255,6 +257,7 @@ reset:
 1:
 	lw	gp, 0(ra)
 
+#if !defined(CONFIG_SKIP_LOWLEVEL_INIT)
 	/* Initialize any external memory.
 	 */
 	la	t9, lowlevel_init
@@ -271,17 +274,18 @@ reset:
 	 */
 	li	t0, CONF_CM_CACHABLE_NONCOHERENT
 	mtc0	t0, CP0_CONFIG
+#endif /* !CONFIG_SKIP_LOWLEVEL_INIT */
 
 	/* Set up temporary stack.
 	 */
-#ifdef CFG_INIT_RAM_LOCK_MIPS
-	li	a0, CFG_INIT_SP_OFFSET
+#ifdef CONFIG_SYS_INIT_RAM_LOCK_MIPS
+	li	a0, CONFIG_SYS_INIT_SP_OFFSET
 	la	t9, mips_cache_lock
 	jalr	t9
 	nop
 #endif
 
-	li	t0, CFG_SDRAM_BASE + CFG_INIT_SP_OFFSET
+	li	t0, CONFIG_SYS_SDRAM_BASE + CONFIG_SYS_INIT_SP_OFFSET
 	la	sp, 0(t0)
 
 	la	t9, board_init_f
@@ -303,26 +307,35 @@ reset:
 relocate_code:
 	move	sp, a0		/* Set new stack pointer	*/
 
-	li	t0, CFG_MONITOR_BASE
+	li	t0, CONFIG_SYS_MONITOR_BASE
 	la	t3, in_ram
 	lw	t2, -12(t3)	/* t2 <-- uboot_end_data	*/
 	move	t1, a2
+	move	s2, a2		/* s2 <-- destination address	*/
 
 	/*
 	 * Fix $gp:
 	 *
-	 * New $gp = (Old $gp - CFG_MONITOR_BASE) + Destination Address
+	 * New $gp = (Old $gp - CONFIG_SYS_MONITOR_BASE) + Destination Address
 	 */
 	move	t6, gp
-	sub	gp, CFG_MONITOR_BASE
+	sub	gp, CONFIG_SYS_MONITOR_BASE
 	add	gp, a2		/* gp now adjusted		*/
-	sub	t6, gp, t6	/* t6 <-- relocation offset	*/
+	sub	s1, gp, t6	/* s1 <-- relocation offset	*/
 
 	/*
 	 * t0 = source address
 	 * t1 = target address
 	 * t2 = source end address
 	 */
+
+	/*
+	 * Save destination address and size for later usage in flush_cache()
+	 */
+	move	s0, a1		/* save gd in s0		*/
+	move	a0, t1		/* a0 <-- destination addr	*/
+	sub	a1, t2, t0	/* a1 <-- size			*/
+
 	/* On the purple board we copy the code earlier in a special way
 	 * in order to solve flash problems
 	 */
@@ -338,9 +351,14 @@ relocate_code:
 	/* If caches were enabled, we would have to flush them here.
 	 */
 
+	/* a0 & a1 are already set up for flush_cache(start, size) */
+	la	t9, flush_cache
+	jalr	t9
+	nop
+
 	/* Jump to where we've relocated ourselves.
 	 */
-	addi	t0, a2, in_ram - _start
+	addi	t0, s2, in_ram - _start
 	jr	t0
 	nop
 
@@ -367,7 +385,7 @@ in_ram:
 1:
 	lw	t1, 0(t4)
 	beqz	t1, 2f
-	add	t1, t6
+	add	t1, s1
 	sw	t1, 0(t4)
 2:
 	addi	t2, 1
@@ -378,8 +396,8 @@ in_ram:
 	 */
 	lw	t1, -12(t0)	/* t1 <-- uboot_end_data	*/
 	lw	t2, -8(t0)	/* t2 <-- uboot_end		*/
-	add	t1, t6		/* adjust pointers		*/
-	add	t2, t6
+	add	t1, s1		/* adjust pointers		*/
+	add	t2, s1
 
 	sub	t1, 4
 1:
@@ -387,10 +405,10 @@ in_ram:
 	bltl	t1, t2, 1b
 	sw	zero, 0(t1)	/* delay slot			*/
 
-	move	a0, a1
+	move	a0, s0		/* a0 <-- gd			*/
 	la	t9, board_init_r
 	jr	t9
-	move	a1, a2		/* delay slot			*/
+	move	a1, s2		/* delay slot			*/
 
 	.end	relocate_code
 
diff --git a/cpu/mpc512x/cpu.c b/cpu/mpc512x/cpu.c
index 1f39ac4c1..b9069b065 100644
--- a/cpu/mpc512x/cpu.c
+++ b/cpu/mpc512x/cpu.c
@@ -30,6 +30,7 @@
 #include <common.h>
 #include <command.h>
 #include <mpc512x.h>
+#include <netdev.h>
 #include <asm/processor.h>
 
 #if defined(CONFIG_OF_LIBFDT)
@@ -40,11 +41,11 @@ DECLARE_GLOBAL_DATA_PTR;
 
 int checkcpu (void)
 {
-	volatile immap_t *immr = (immap_t *) CFG_IMMR;
+	volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
 	ulong clock = gd->cpu_clk;
 	u32 pvr = get_pvr ();
 	u32 spridr = immr->sysconf.spridr;
-	char buf[32];
+	char buf1[32], buf2[32];
 
 	puts ("CPU:   ");
 
@@ -64,8 +65,9 @@ int checkcpu (void)
 	default:
 		puts ("unknown ");
 	}
-	printf ("at %s MHz, CSB at %3d MHz\n", strmhz(buf, clock),
-		gd->csb_clk / 1000000);
+	printf ("at %s MHz, CSB at %s MHz\n",
+		strmhz(buf1, clock),
+		strmhz(buf2, gd->csb_clk) );
 	return 0;
 }
 
@@ -74,7 +76,7 @@ int
 do_reset (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
 {
 	ulong msr;
-	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
 
 	/* Interrupts and MMU off */
 	__asm__ __volatile__ ("mfmsr    %0":"=r" (msr):);
@@ -121,7 +123,7 @@ void watchdog_reset (void)
 	int re_enable = disable_interrupts ();
 
 	/* Reset watchdog */
-	volatile immap_t *immr = (immap_t *) CFG_IMMR;
+	volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
 	immr->wdt.swsrr = 0x556c;
 	immr->wdt.swsrr = 0xaa39;
 
@@ -195,3 +197,15 @@ void ft_cpu_setup(void *blob, bd_t *bd)
 #endif
 }
 #endif
+
+#ifdef CONFIG_MPC512x_FEC
+/* Default initializations for FEC controllers.  To override,
+ * create a board-specific function called:
+ * 	int board_eth_init(bd_t *bis)
+ */
+
+int cpu_eth_init(bd_t *bis)
+{
+	return mpc512x_fec_initialize(bis);
+}
+#endif
diff --git a/cpu/mpc512x/cpu_init.c b/cpu/mpc512x/cpu_init.c
index d6949f6bb..fa753c8e7 100644
--- a/cpu/mpc512x/cpu_init.c
+++ b/cpu/mpc512x/cpu_init.c
@@ -37,23 +37,23 @@ void cpu_init_f (volatile immap_t * im)
 	u32 ips_div;
 
 	/* Pointer is writable since we allocated a register for it */
-	gd = (gd_t *) (CFG_INIT_RAM_ADDR + CFG_GBL_DATA_OFFSET);
+	gd = (gd_t *) (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET);
 
 	/* Clear initial global data */
 	memset ((void *) gd, 0, sizeof (gd_t));
 
 	/* system performance tweaking */
 
-#ifdef CFG_ACR_PIPE_DEP
+#ifdef CONFIG_SYS_ACR_PIPE_DEP
 	/* Arbiter pipeline depth */
 	im->arbiter.acr = (im->arbiter.acr & ~ACR_PIPE_DEP) |
-			  (CFG_ACR_PIPE_DEP << ACR_PIPE_DEP_SHIFT);
+			  (CONFIG_SYS_ACR_PIPE_DEP << ACR_PIPE_DEP_SHIFT);
 #endif
 
-#ifdef CFG_ACR_RPTCNT
+#ifdef CONFIG_SYS_ACR_RPTCNT
 	/* Arbiter repeat count */
 	im->arbiter.acr = ((im->arbiter.acr & ~(ACR_RPTCNT)) |
-			   (CFG_ACR_RPTCNT << ACR_RPTCNT_SHIFT));
+			   (CONFIG_SYS_ACR_RPTCNT << ACR_RPTCNT_SHIFT));
 #endif
 
 	/* RSR - Reset Status Register - clear all status */
diff --git a/cpu/mpc512x/i2c.c b/cpu/mpc512x/i2c.c
index 56ba44372..4f6bc8640 100644
--- a/cpu/mpc512x/i2c.c
+++ b/cpu/mpc512x/i2c.c
@@ -32,7 +32,7 @@ DECLARE_GLOBAL_DATA_PTR;
 #include <mpc512x.h>
 #include <i2c.h>
 
-#define immr ((immap_t *)CFG_IMMR)
+#define immr ((immap_t *)CONFIG_SYS_IMMR)
 
 /* by default set I2C bus 0 active */
 static unsigned int bus_num = 0;
@@ -382,23 +382,6 @@ Done:
 	return ret;
 }
 
-uchar i2c_reg_read (uchar chip, uchar reg)
-{
-	uchar buf;
-
-	i2c_read (chip, reg, 1, &buf, 1);
-
-	return buf;
-}
-
-void i2c_reg_write (uchar chip, uchar reg, uchar val)
-{
-	i2c_write (chip, reg, 1, &val, 1);
-
-	return;
-}
-
-
 int i2c_set_bus_num (unsigned int bus)
 {
 	if (bus >= I2C_BUS_CNT) {
@@ -422,7 +405,7 @@ unsigned int i2c_get_bus_speed (void)
 
 int i2c_set_bus_speed (unsigned int speed)
 {
-	if (speed != CFG_I2C_SPEED)
+	if (speed != CONFIG_SYS_I2C_SPEED)
 		return -1;
 
 	return 0;
diff --git a/cpu/mpc512x/interrupts.c b/cpu/mpc512x/interrupts.c
index 8cc241c89..ef7c773b2 100644
--- a/cpu/mpc512x/interrupts.c
+++ b/cpu/mpc512x/interrupts.c
@@ -37,7 +37,7 @@ struct irq_action {
 
 int interrupt_init_cpu (unsigned *decrementer_count)
 {
-	*decrementer_count = get_tbclk () / CFG_HZ;
+	*decrementer_count = get_tbclk () / CONFIG_SYS_HZ;
 
 	return 0;
 }
diff --git a/cpu/mpc512x/iopin.c b/cpu/mpc512x/iopin.c
index 3d7042dfb..78f4fa1e8 100644
--- a/cpu/mpc512x/iopin.c
+++ b/cpu/mpc512x/iopin.c
@@ -29,7 +29,7 @@ void iopin_initialize(iopin_t *ioregs_init, int len)
 {
 	short i, j, p;
 	u_long *reg;
-	immap_t *im = (immap_t *)CFG_IMMR;
+	immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
 
 	reg = (u_long *)&(im->io_ctrl.regs[0]);
 
diff --git a/cpu/mpc512x/serial.c b/cpu/mpc512x/serial.c
index 8a214041a..7db87a80a 100644
--- a/cpu/mpc512x/serial.c
+++ b/cpu/mpc512x/serial.c
@@ -37,7 +37,7 @@ DECLARE_GLOBAL_DATA_PTR;
 
 static void fifo_init (volatile psc512x_t *psc)
 {
-	volatile immap_t *im = (immap_t *) CFG_IMMR;
+	volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR;
 
 	/* reset Rx & Tx fifo slice */
 	psc->rfcmd = PSC_FIFO_RESET_SLICE;
@@ -60,7 +60,7 @@ static void fifo_init (volatile psc512x_t *psc)
 
 int serial_init(void)
 {
-	volatile immap_t *im = (immap_t *) CFG_IMMR;
+	volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR;
 	volatile psc512x_t *psc = (psc512x_t *) &im->psc[CONFIG_PSC_CONSOLE];
 	unsigned long baseclk;
 	int div;
@@ -106,7 +106,7 @@ int serial_init(void)
 
 void serial_putc (const char c)
 {
-	volatile immap_t *im = (immap_t *)CFG_IMMR;
+	volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
 	volatile psc512x_t *psc = (psc512x_t *) &im->psc[CONFIG_PSC_CONSOLE];
 
 	if (c == '\n')
@@ -121,7 +121,7 @@ void serial_putc (const char c)
 
 void serial_putc_raw (const char c)
 {
-	volatile immap_t *im = (immap_t *) CFG_IMMR;
+	volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR;
 	volatile psc512x_t *psc = (psc512x_t *) &im->psc[CONFIG_PSC_CONSOLE];
 
 	/* Wait for last character to go. */
@@ -141,7 +141,7 @@ void serial_puts (const char *s)
 
 int serial_getc (void)
 {
-	volatile immap_t *im = (immap_t *) CFG_IMMR;
+	volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR;
 	volatile psc512x_t *psc = (psc512x_t *) &im->psc[CONFIG_PSC_CONSOLE];
 
 	/* Wait for a character to arrive. */
@@ -153,7 +153,7 @@ int serial_getc (void)
 
 int serial_tstc (void)
 {
-	volatile immap_t *im = (immap_t *) CFG_IMMR;
+	volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR;
 	volatile psc512x_t *psc = (psc512x_t *) &im->psc[CONFIG_PSC_CONSOLE];
 
 	return !(psc->rfstat & PSC_FIFO_EMPTY);
@@ -161,7 +161,7 @@ int serial_tstc (void)
 
 void serial_setbrg (void)
 {
-	volatile immap_t *im = (immap_t *) CFG_IMMR;
+	volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR;
 	volatile psc512x_t *psc = (psc512x_t *) &im->psc[CONFIG_PSC_CONSOLE];
 	unsigned long baseclk, div;
 
@@ -174,7 +174,7 @@ void serial_setbrg (void)
 
 void serial_setrts(int s)
 {
-	volatile immap_t *im = (immap_t *) CFG_IMMR;
+	volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR;
 	volatile psc512x_t *psc = (psc512x_t *) &im->psc[CONFIG_PSC_CONSOLE];
 
 	if (s) {
@@ -189,7 +189,7 @@ void serial_setrts(int s)
 
 int serial_getcts(void)
 {
-	volatile immap_t *im = (immap_t *) CFG_IMMR;
+	volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR;
 	volatile psc512x_t *psc = (psc512x_t *) &im->psc[CONFIG_PSC_CONSOLE];
 
 	return (psc->ip & 0x1) ? 0 : 1;
diff --git a/cpu/mpc512x/speed.c b/cpu/mpc512x/speed.c
index e62477bc0..542bf21c7 100644
--- a/cpu/mpc512x/speed.c
+++ b/cpu/mpc512x/speed.c
@@ -62,13 +62,13 @@ static int sys_dividors[][2] = {
 
 int get_clocks (void)
 {
-	volatile immap_t *im = (immap_t *) CFG_IMMR;
+	volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR;
 	u8 spmf;
 	u8 cpmf;
 	u8 sys_div;
 	u8 ips_div;
 	u8 pci_div;
-	u32 ref_clk = CFG_MPC512X_CLKIN;
+	u32 ref_clk = CONFIG_SYS_MPC512X_CLKIN;
 	u32 spll;
 	u32 sys_clk;
 	u32 core_clk;
@@ -125,12 +125,14 @@ ulong get_bus_freq (ulong dummy)
 
 int do_clocks (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
 {
+	char buf[32];
+
 	printf("Clock configuration:\n");
-	printf("  CPU:                 %4ld MHz\n", gd->cpu_clk / 1000000);
-	printf("  Coherent System Bus: %4d MHz\n", gd->csb_clk / 1000000);
-	printf("  IPS Bus:             %4d MHz\n", gd->ips_clk / 1000000);
-	printf("  PCI:                 %4d MHz\n", gd->pci_clk / 1000000);
-	printf("  DDR:                 %4d MHz\n", 2 * gd->csb_clk / 1000000);
+	printf("  CPU:                 %-4s MHz\n", strmhz(buf, gd->cpu_clk));
+	printf("  Coherent System Bus: %-4s MHz\n", strmhz(buf, gd->csb_clk));
+	printf("  IPS Bus:             %-4s MHz\n", strmhz(buf, gd->ips_clk));
+	printf("  PCI:                 %-4s MHz\n", strmhz(buf, gd->pci_clk));
+	printf("  DDR:                 %-4s MHz\n", strmhz(buf, 2*gd->csb_clk));
 	return 0;
 }
 
diff --git a/cpu/mpc512x/start.S b/cpu/mpc512x/start.S
index fb8acb5df..360682daf 100644
--- a/cpu/mpc512x/start.S
+++ b/cpu/mpc512x/start.S
@@ -31,6 +31,7 @@
 
 #include <config.h>
 #include <mpc512x.h>
+#include <timestamp.h>
 #include <version.h>
 
 #define CONFIG_521X	1		/* needed for Linux kernel header files*/
@@ -85,7 +86,7 @@
 	.globl	version_string
 version_string:
 	.ascii U_BOOT_VERSION
-	.ascii " (", __DATE__, " - ", __TIME__, ")"
+	.ascii " (", U_BOOT_DATE, " - ", U_BOOT_TIME, ")"
 	.ascii " ", CONFIG_IDENT_STRING, "\0"
 
 /*
@@ -192,8 +193,8 @@ boot_cold:
 
 	/* Set IMMR area to our preferred location */
 	lis	r4, CONFIG_DEFAULT_IMMR@h
-	lis	r3, CFG_IMMR@h
-	ori	r3, r3, CFG_IMMR@l
+	lis	r3, CONFIG_SYS_IMMR@h
+	ori	r3, r3, CONFIG_SYS_IMMR@l
 	stw	r3, IMMRBAR(r4)
 	mtspr	MBAR, r3		/* IMMRBAR is mirrored into the MBAR SPR (311) */
 
@@ -208,18 +209,18 @@ boot_cold:
 	 */
 
 	/* Boot CS/CS0 window range */
-	lis     r3, CFG_IMMR@h
-	ori     r3, r3, CFG_IMMR@l
+	lis     r3, CONFIG_SYS_IMMR@h
+	ori     r3, r3, CONFIG_SYS_IMMR@l
 
-	lis	r4, START_REG(CFG_FLASH_BASE)
-	ori	r4, r4, STOP_REG(CFG_FLASH_BASE, CFG_FLASH_SIZE)
+	lis	r4, START_REG(CONFIG_SYS_FLASH_BASE)
+	ori	r4, r4, STOP_REG(CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_SIZE)
 	stw	r4, LPCS0AW(r3)
 
 	/*
 	 * The SRAM window has a fixed size (256K), so only the start address
 	 * is necessary
 	 */
-	lis	r4, START_REG(CFG_SRAM_BASE) & 0xff00
+	lis	r4, START_REG(CONFIG_SYS_SRAM_BASE) & 0xff00
 	stw	r4, SRAMBAR(r3)
 
 	/*
@@ -234,11 +235,11 @@ boot_cold:
 	 * Set configuration of the Boot/CS0, the SRAM window does not have a
 	 * config register so no params can be set for it
 	 */
-	lis     r3, (CFG_IMMR + LPC_OFFSET)@h
-	ori     r3, r3, (CFG_IMMR + LPC_OFFSET)@l
+	lis     r3, (CONFIG_SYS_IMMR + LPC_OFFSET)@h
+	ori     r3, r3, (CONFIG_SYS_IMMR + LPC_OFFSET)@l
 
-	lis     r4, CFG_CS0_CFG@h
-	ori     r4, r4, CFG_CS0_CFG@l
+	lis     r4, CONFIG_SYS_CS0_CFG@h
+	ori     r4, r4, CONFIG_SYS_CS0_CFG@l
 	stw     r4, CS0_CONFIG(r3)
 
 	/* Master enable all CS's */
@@ -246,15 +247,15 @@ boot_cold:
 	ori	r4, r4, CS_CTRL_ME@l
 	stw	r4, CS_CTRL(r3)
 
-	lis	r4, (CFG_MONITOR_BASE)@h
-	ori	r4, r4, (CFG_MONITOR_BASE)@l
+	lis	r4, (CONFIG_SYS_MONITOR_BASE)@h
+	ori	r4, r4, (CONFIG_SYS_MONITOR_BASE)@l
 	addi	r5, r4, in_flash - _start + EXC_OFF_SYS_RESET
 	mtlr	r5
 	blr
 
 in_flash:
-	lis	r1, (CFG_INIT_RAM_ADDR + CFG_GBL_DATA_OFFSET)@h
-	ori	r1, r1, (CFG_INIT_RAM_ADDR + CFG_GBL_DATA_OFFSET)@l
+	lis	r1, (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET)@h
+	ori	r1, r1, (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET)@l
 
 	li	r0, 0		/* Make room for stack frame header and	*/
 	stwu	r0, -4(r1)	/* clear final stack frame so that	*/
@@ -268,7 +269,7 @@ in_flash:
 	GET_GOT			/* initialize GOT access	*/
 
 	/* r3: IMMR */
-	lis	r3, CFG_IMMR@h
+	lis	r3, CONFIG_SYS_IMMR@h
 	/* run low-level CPU init code (in Flash) */
 	bl	cpu_init_f
 
@@ -353,12 +354,12 @@ cpu_early_init:
 	SYNC
 	mtspr	SRR1, r3			/* Mirror current MSR state in SRR1 */
 
-	lis	r3, CFG_IMMR@h
+	lis	r3, CONFIG_SYS_IMMR@h
 
 #if defined(CONFIG_WATCHDOG)
 	/* Initialise the watchdog and reset it */
 	/*--------------------------------------*/
-	lis r4, CFG_WATCHDOG_VALUE
+	lis r4, CONFIG_SYS_WATCHDOG_VALUE
 	ori r4, r4, (SWCRR_SWEN | SWCRR_SWRI | SWCRR_SWPR)
 	stw r4, SWCRR(r3)
 
@@ -386,18 +387,18 @@ cpu_early_init:
 	/* Initialize the Hardware Implementation-dependent Registers */
 	/* HID0 also contains cache control			*/
 	/*------------------------------------------------------*/
-	lis	r3, CFG_HID0_INIT@h
-	ori	r3, r3, CFG_HID0_INIT@l
+	lis	r3, CONFIG_SYS_HID0_INIT@h
+	ori	r3, r3, CONFIG_SYS_HID0_INIT@l
 	SYNC
 	mtspr	HID0, r3
 
-	lis	r3, CFG_HID0_FINAL@h
-	ori	r3, r3, CFG_HID0_FINAL@l
+	lis	r3, CONFIG_SYS_HID0_FINAL@h
+	ori	r3, r3, CONFIG_SYS_HID0_FINAL@l
 	SYNC
 	mtspr	HID0, r3
 
-	lis	r3, CFG_HID2@h
-	ori	r3, r3, CFG_HID2@l
+	lis	r3, CONFIG_SYS_HID2@h
+	ori	r3, r3, CONFIG_SYS_HID2@l
 	SYNC
 	mtspr	HID2, r3
 	sync
@@ -499,16 +500,16 @@ relocate_code:
 	mr	r10, r5		/* Save copy of Destination Address */
 
 	mr	r3,  r5				/* Destination Address */
-	lis	r4, CFG_MONITOR_BASE@h		/* Source      Address */
-	ori	r4, r4, CFG_MONITOR_BASE@l
+	lis	r4, CONFIG_SYS_MONITOR_BASE@h		/* Source      Address */
+	ori	r4, r4, CONFIG_SYS_MONITOR_BASE@l
 	lwz	r5, GOT(__init_end)
 	sub	r5, r5, r4
-	li	r6, CFG_CACHELINE_SIZE		/* Cache Line Size */
+	li	r6, CONFIG_SYS_CACHELINE_SIZE		/* Cache Line Size */
 
 	/*
 	 * Fix GOT pointer:
 	 *
-	 * New GOT-PTR = (old GOT-PTR - CFG_MONITOR_BASE)
+	 * New GOT-PTR = (old GOT-PTR - CONFIG_SYS_MONITOR_BASE)
 	 *		+ Destination Address
 	 *
 	 * Offset:
diff --git a/cpu/mpc5xx/cpu.c b/cpu/mpc5xx/cpu.c
index 4bef90c48..7fffebcc1 100644
--- a/cpu/mpc5xx/cpu.c
+++ b/cpu/mpc5xx/cpu.c
@@ -80,7 +80,7 @@ void watchdog_reset (void)
 {
 	int re_enable = disable_interrupts ();
 
-	reset_5xx_watchdog ((immap_t *) CFG_IMMR);
+	reset_5xx_watchdog ((immap_t *) CONFIG_SYS_IMMR);
 	if (re_enable)
 		enable_interrupts ();
 }
@@ -103,14 +103,14 @@ void reset_5xx_watchdog (volatile immap_t * immr)
  */
 unsigned long get_tbclk (void)
 {
-	volatile immap_t *immr = (volatile immap_t *) CFG_IMMR;
+	volatile immap_t *immr = (volatile immap_t *) CONFIG_SYS_IMMR;
 	ulong oscclk, factor;
 
 	if (immr->im_clkrst.car_sccr & SCCR_TBS) {
 		return (gd->cpu_clk / 16);
 	}
 
-	factor = (((CFG_PLPRCR) & PLPRCR_MF_MSK) >> PLPRCR_MF_SHIFT) + 1;
+	factor = (((CONFIG_SYS_PLPRCR) & PLPRCR_MF_MSK) >> PLPRCR_MF_SHIFT) + 1;
 
 	oscclk = gd->cpu_clk / factor;
 
@@ -141,7 +141,7 @@ int dcache_status (void)
 int do_reset (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
 {
 #if defined(CONFIG_PATI)
-	volatile ulong *addr = (ulong *) CFG_RESET_ADDRESS;
+	volatile ulong *addr = (ulong *) CONFIG_SYS_RESET_ADDRESS;
 	*addr = 1;
 #else
 	ulong addr;
@@ -155,15 +155,15 @@ int do_reset (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
 	 * Trying to execute the next instruction at a non-existing address
 	 * should cause a machine check, resulting in reset
 	 */
-#ifdef CFG_RESET_ADDRESS
-	addr = CFG_RESET_ADDRESS;
+#ifdef CONFIG_SYS_RESET_ADDRESS
+	addr = CONFIG_SYS_RESET_ADDRESS;
 #else
 	/*
-	 * note: when CFG_MONITOR_BASE points to a RAM address, CFG_MONITOR_BASE         * - sizeof (ulong) is usually a valid address. Better pick an address
-	 * known to be invalid on your system and assign it to CFG_RESET_ADDRESS.
+	 * note: when CONFIG_SYS_MONITOR_BASE points to a RAM address, CONFIG_SYS_MONITOR_BASE         * - sizeof (ulong) is usually a valid address. Better pick an address
+	 * known to be invalid on your system and assign it to CONFIG_SYS_RESET_ADDRESS.
 	 * "(ulong)-1" used to be a good choice for many systems...
 	 */
-	addr = CFG_MONITOR_BASE - sizeof (ulong);
+	addr = CONFIG_SYS_MONITOR_BASE - sizeof (ulong);
 #endif
 	((void (*) (void)) addr) ();
 #endif  /* #if defined(CONFIG_PATI) */
diff --git a/cpu/mpc5xx/cpu_init.c b/cpu/mpc5xx/cpu_init.c
index 5bbb7986b..cb4bf8473 100644
--- a/cpu/mpc5xx/cpu_init.c
+++ b/cpu/mpc5xx/cpu_init.c
@@ -41,74 +41,74 @@ void cpu_init_f (volatile immap_t * immr)
 
 	/* SYPCR - contains watchdog control. This will enable watchdog */
 	/* if CONFIG_WATCHDOG is set */
-	immr->im_siu_conf.sc_sypcr = CFG_SYPCR;
+	immr->im_siu_conf.sc_sypcr = CONFIG_SYS_SYPCR;
 
 #if defined(CONFIG_WATCHDOG)
 	reset_5xx_watchdog (immr);
 #endif
 
 	/* SIUMCR - contains debug pin configuration */
-	immr->im_siu_conf.sc_siumcr |= CFG_SIUMCR;
+	immr->im_siu_conf.sc_siumcr |= CONFIG_SYS_SIUMCR;
 
 	/* Initialize timebase. Unlock TBSCRK */
 	immr->im_sitk.sitk_tbscrk = KAPWR_KEY;
-	immr->im_sit.sit_tbscr = CFG_TBSCR;
+	immr->im_sit.sit_tbscr = CONFIG_SYS_TBSCR;
 
 	/* Full IMB bus speed */
-	immr->im_uimb.uimb_umcr = CFG_UMCR;
+	immr->im_uimb.uimb_umcr = CONFIG_SYS_UMCR;
 
 	/* Time base and decrementer will be enables (TBE) */
 	/* in init_timebase() in time.c called from board_init_f(). */
 
 	/* Initialize the PIT. Unlock PISCRK */
 	immr->im_sitk.sitk_piscrk = KAPWR_KEY;
-	immr->im_sit.sit_piscr = CFG_PISCR;
+	immr->im_sit.sit_piscr = CONFIG_SYS_PISCR;
 
 #if !defined(CONFIG_PATI)
 	/* PATI sest PLL in start.S */
 	/* PLL (CPU clock) settings */
 	immr->im_clkrstk.cark_plprcrk = KAPWR_KEY;
 
-	/* If CFG_PLPRCR (set in the various *_config.h files) tries to
-	 * set the MF field, then just copy CFG_PLPRCR over car_plprcr,
-	 * otherwise OR in CFG_PLPRCR so we do not change the currentMF
+	/* If CONFIG_SYS_PLPRCR (set in the various *_config.h files) tries to
+	 * set the MF field, then just copy CONFIG_SYS_PLPRCR over car_plprcr,
+	 * otherwise OR in CONFIG_SYS_PLPRCR so we do not change the currentMF
 	 * field value.
 	 */
-#if ((CFG_PLPRCR & PLPRCR_MF_MSK) != 0)
-	reg = CFG_PLPRCR;			/* reset control bits   */
+#if ((CONFIG_SYS_PLPRCR & PLPRCR_MF_MSK) != 0)
+	reg = CONFIG_SYS_PLPRCR;			/* reset control bits   */
 #else
 	reg = immr->im_clkrst.car_plprcr;
 	reg &= PLPRCR_MF_MSK;			/* isolate MF field */
-	reg |= CFG_PLPRCR;			/* reset control bits   */
+	reg |= CONFIG_SYS_PLPRCR;			/* reset control bits   */
 #endif
 	immr->im_clkrst.car_plprcr = reg;
 
 #endif /* !defined(CONFIG_PATI) */
 
-	/* System integration timers. CFG_MASK has EBDF configuration */
+	/* System integration timers. CONFIG_SYS_MASK has EBDF configuration */
 	immr->im_clkrstk.cark_sccrk = KAPWR_KEY;
 	reg = immr->im_clkrst.car_sccr;
 	reg &= SCCR_MASK;
-	reg |= CFG_SCCR;
+	reg |= CONFIG_SYS_SCCR;
 	immr->im_clkrst.car_sccr = reg;
 
 	/* Memory Controller */
-	memctl->memc_br0 = CFG_BR0_PRELIM;
-	memctl->memc_or0 = CFG_OR0_PRELIM;
+	memctl->memc_br0 = CONFIG_SYS_BR0_PRELIM;
+	memctl->memc_or0 = CONFIG_SYS_OR0_PRELIM;
 
-#if (defined(CFG_OR1_PRELIM) && defined(CFG_BR1_PRELIM))
-	memctl->memc_or1 = CFG_OR1_PRELIM;
-	memctl->memc_br1 = CFG_BR1_PRELIM;
+#if (defined(CONFIG_SYS_OR1_PRELIM) && defined(CONFIG_SYS_BR1_PRELIM))
+	memctl->memc_or1 = CONFIG_SYS_OR1_PRELIM;
+	memctl->memc_br1 = CONFIG_SYS_BR1_PRELIM;
 #endif
 
-#if defined(CFG_OR2_PRELIM) && defined(CFG_BR2_PRELIM)
-	memctl->memc_or2 = CFG_OR2_PRELIM;
-	memctl->memc_br2 = CFG_BR2_PRELIM;
+#if defined(CONFIG_SYS_OR2_PRELIM) && defined(CONFIG_SYS_BR2_PRELIM)
+	memctl->memc_or2 = CONFIG_SYS_OR2_PRELIM;
+	memctl->memc_br2 = CONFIG_SYS_BR2_PRELIM;
 #endif
 
-#if defined(CFG_OR3_PRELIM) && defined(CFG_BR3_PRELIM)
-	memctl->memc_or3 = CFG_OR3_PRELIM;
-	memctl->memc_br3 = CFG_BR3_PRELIM;
+#if defined(CONFIG_SYS_OR3_PRELIM) && defined(CONFIG_SYS_BR3_PRELIM)
+	memctl->memc_or3 = CONFIG_SYS_OR3_PRELIM;
+	memctl->memc_br3 = CONFIG_SYS_BR3_PRELIM;
 #endif
 
 }
diff --git a/cpu/mpc5xx/interrupts.c b/cpu/mpc5xx/interrupts.c
index a4f47c74b..167543fcf 100644
--- a/cpu/mpc5xx/interrupts.c
+++ b/cpu/mpc5xx/interrupts.c
@@ -52,11 +52,11 @@ static struct interrupt_action irq_vecs[NR_IRQS];
 
 int interrupt_init_cpu (ulong *decrementer_count)
 {
-	volatile immap_t *immr = (immap_t *) CFG_IMMR;
+	volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
 	int vec;
 
 	/* Decrementer used here for status led */
-	*decrementer_count = get_tbclk () / CFG_HZ;
+	*decrementer_count = get_tbclk () / CONFIG_SYS_HZ;
 
 	/* Disable all interrupts */
 	immr->im_siu_conf.sc_simask = 0;
@@ -74,7 +74,7 @@ int interrupt_init_cpu (ulong *decrementer_count)
  */
 void external_interrupt (struct pt_regs *regs)
 {
-	volatile immap_t *immr = (immap_t *) CFG_IMMR;
+	volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
 	int irq;
 	ulong simask, newmask;
 	ulong vec, v_bit;
@@ -130,7 +130,7 @@ void external_interrupt (struct pt_regs *regs)
 void irq_install_handler (int vec, interrupt_handler_t * handler,
 						  void *arg)
 {
-	volatile immap_t *immr = (immap_t *) CFG_IMMR;
+	volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
 	/* SIU interrupt */
 	if (irq_vecs[vec].handler != NULL) {
 		printf ("SIU interrupt %d 0x%x\n",
@@ -148,7 +148,7 @@ void irq_install_handler (int vec, interrupt_handler_t * handler,
 
 void irq_free_handler (int vec)
 {
-	volatile immap_t *immr = (immap_t *) CFG_IMMR;
+	volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
 	/* SIU interrupt */
 #if 0
 	printf ("Free CPM interrupt for vector %d\n",
@@ -165,7 +165,7 @@ void irq_free_handler (int vec)
  */
 void timer_interrupt_cpu (struct pt_regs *regs)
 {
-	volatile immap_t *immr = (immap_t *) CFG_IMMR;
+	volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
 
 #if 0
 	printf ("*** Timer Interrupt *** ");
diff --git a/cpu/mpc5xx/serial.c b/cpu/mpc5xx/serial.c
index 39f57a121..88c6db81c 100644
--- a/cpu/mpc5xx/serial.c
+++ b/cpu/mpc5xx/serial.c
@@ -48,7 +48,7 @@ static int ready_to_send(void);
 
 int serial_init (void)
 {
-	volatile immap_t *immr = (immap_t *)CFG_IMMR;
+	volatile immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
 
 	serial_setbrg();
 
@@ -65,7 +65,7 @@ int serial_init (void)
 
 void serial_putc(const char c)
 {
-	volatile immap_t *immr = (immap_t *)CFG_IMMR;
+	volatile immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
 
 	/* Test for completition */
 	if(ready_to_send()) {
@@ -87,7 +87,7 @@ void serial_putc(const char c)
 
 int serial_getc(void)
 {
-	volatile immap_t *immr = (immap_t *)CFG_IMMR;
+	volatile immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
 	volatile short status;
 	unsigned char tmp;
 
@@ -115,7 +115,7 @@ int serial_getc(void)
 
 int serial_tstc()
 {
-	volatile immap_t *immr = (immap_t *)CFG_IMMR;
+	volatile immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
 	short status;
 
 	/* New data character ? */
@@ -129,7 +129,7 @@ int serial_tstc()
 
 void serial_setbrg (void)
 {
-	volatile immap_t *immr = (immap_t *)CFG_IMMR;
+	volatile immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
 	short scxbr;
 
 	/* Set baudrate */
@@ -151,7 +151,7 @@ void serial_puts (const char *s)
 
 int ready_to_send(void)
 {
-	volatile immap_t *immr = (immap_t *)CFG_IMMR;
+	volatile immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
 	volatile short status;
 
 	do {
diff --git a/cpu/mpc5xx/speed.c b/cpu/mpc5xx/speed.c
index 7b7c5b961..ea5c1dead 100644
--- a/cpu/mpc5xx/speed.c
+++ b/cpu/mpc5xx/speed.c
@@ -38,14 +38,14 @@ DECLARE_GLOBAL_DATA_PTR;
  */
 int get_clocks (void)
 {
-	volatile immap_t *immr = (immap_t *) CFG_IMMR;
+	volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
 
 #ifndef	CONFIG_5xx_GCLK_FREQ
 	uint divf = (immr->im_clkrst.car_plprcr & PLPRCR_DIVF_MSK);
 	uint mf = ((immr->im_clkrst.car_plprcr & PLPRCR_MF_MSK) >> PLPRCR_MF_SHIFT);
 	ulong vcoout;
 
-	vcoout = (CFG_OSC_CLK / (divf + 1)) * (mf + 1) * 2;
+	vcoout = (CONFIG_SYS_OSC_CLK / (divf + 1)) * (mf + 1) * 2;
 	if(immr->im_clkrst.car_plprcr & PLPRCR_CSRC_MSK) {
 		gd->cpu_clk = vcoout / (2^(((immr->im_clkrst.car_sccr & SCCR_DFNL_MSK) >> SCCR_DFNL_SHIFT) + 1));
 	} else {
diff --git a/cpu/mpc5xx/spi.c b/cpu/mpc5xx/spi.c
index 3c187bee5..3ca15ea83 100644
--- a/cpu/mpc5xx/spi.c
+++ b/cpu/mpc5xx/spi.c
@@ -111,7 +111,7 @@ void spi_init_f (void)
 	volatile immap_t *immr;
 	volatile qsmcm5xx_t *qsmcm;
 
-	immr = (immap_t *)  CFG_IMMR;
+	immr = (immap_t *)  CONFIG_SYS_IMMR;
 	qsmcm = (qsmcm5xx_t *)&immr->im_qsmcm;
 
 	qsmcm->qsmcm_qsmcr = 0; /* all accesses enabled */
@@ -128,7 +128,7 @@ void spi_init_f (void)
 	 * PQSPAR[06] = 1 [0x0200] -> PERI: (SPIMOSI)
 	 * PQSPAR[07] = 1 [0x0100] -> PERI: (SPIMISO)
 	 * -------------------------------------------- */
-	qsmcm->qsmcm_pqspar =  0x3 | (CFG_SPI_CS_USED << 3);
+	qsmcm->qsmcm_pqspar =  0x3 | (CONFIG_SYS_SPI_CS_USED << 3);
 
 	 /* --------------------------------------------
 	 * DDRQS[00] = 0 reserved
@@ -160,7 +160,7 @@ void spi_init_f (void)
 	 * PORTQS[14] = 0 [0x0002] -> SPIMOSI Output
 	 * PORTQS[15] = 0 [0x0001] -> SPIMISO Input
 	 * -------------------------------------------- */
-	qsmcm->qsmcm_portqs |= (CFG_SPI_CS_BASE << 3);
+	qsmcm->qsmcm_portqs |= (CONFIG_SYS_SPI_CS_BASE << 3);
 	/* --------------------------------------------
 	 * Controll Register 0
 	 * SPCR0[00] = 1 (0x8000) Master
@@ -235,7 +235,7 @@ ssize_t short_spi_write (uchar *addr, int alen, uchar *buffer, int len)
 	volatile immap_t *immr;
 	volatile qsmcm5xx_t *qsmcm;
 
-	immr = (immap_t *)  CFG_IMMR;
+	immr = (immap_t *)  CONFIG_SYS_IMMR;
 	qsmcm = (qsmcm5xx_t *)&immr->im_qsmcm;
 	for(i=0;i<32;i++) {
 		 qsmcm->qsmcm_recram[i]=0x0000;
@@ -308,7 +308,7 @@ ssize_t short_spi_read (uchar *addr, int alen, uchar *buffer, int len)
 	volatile immap_t *immr;
 	volatile qsmcm5xx_t *qsmcm;
 
-	immr = (immap_t *)  CFG_IMMR;
+	immr = (immap_t *)  CONFIG_SYS_IMMR;
 	qsmcm = (qsmcm5xx_t *)&immr->im_qsmcm;
 
 	for(i=0;i<32;i++) {
@@ -364,15 +364,15 @@ ssize_t spi_xfer (size_t count)
 	int i;
 	int tm;
 	ushort status;
-	immr = (immap_t *)  CFG_IMMR;
+	immr = (immap_t *)  CONFIG_SYS_IMMR;
 	qsmcm = (qsmcm5xx_t *)&immr->im_qsmcm;
 	DPRINT (("*** spi_xfer entered count %d***\n",count));
 
 	/* Set CS for device */
 	for(i=0;i<(count-1);i++)
-		qsmcm->qsmcm_comdram[i] = 0x80 | CFG_SPI_CS_ACT;  /* CS3 is connected to the SPI EEPROM */
+		qsmcm->qsmcm_comdram[i] = 0x80 | CONFIG_SYS_SPI_CS_ACT;  /* CS3 is connected to the SPI EEPROM */
 
-	qsmcm->qsmcm_comdram[i] = CFG_SPI_CS_ACT; /* CS3 is connected to the SPI EEPROM */
+	qsmcm->qsmcm_comdram[i] = CONFIG_SYS_SPI_CS_ACT; /* CS3 is connected to the SPI EEPROM */
 	qsmcm->qsmcm_spcr2=((count-1)&0x1F)<<8;
 
 	DPRINT (("*** spi_xfer: Bytes to be xferred: %d ***\n", count));
diff --git a/cpu/mpc5xx/start.S b/cpu/mpc5xx/start.S
index 0637003ce..106935cb6 100644
--- a/cpu/mpc5xx/start.S
+++ b/cpu/mpc5xx/start.S
@@ -32,6 +32,7 @@
 
 #include <config.h>
 #include <mpc5xx.h>
+#include <timestamp.h>
 #include <version.h>
 
 #define CONFIG_5xx 1		/* needed for Linux kernel header files */
@@ -80,14 +81,14 @@
 	.globl	version_string
 version_string:
 	.ascii U_BOOT_VERSION
-	.ascii " (", __DATE__, " - ", __TIME__, ")"
+	.ascii " (", U_BOOT_DATE, " - ", U_BOOT_TIME, ")"
 	.ascii CONFIG_IDENT_STRING, "\0"
 
 	. = EXC_OFF_SYS_RESET
 	.globl	_start
 _start:
 	mfspr	r3, 638
-	li	r4, CFG_ISB			/* Set ISB bit */
+	li	r4, CONFIG_SYS_ISB			/* Set ISB bit */
 	or	r3, r3, r4
 	mtspr	638, r3
 	li	r21, BOOTFLAG_COLD		/* Normal Power-On: Boot from FLASH	*/
@@ -121,12 +122,12 @@ boot_warm:
 	/* the external flash access on PATI fails if programming the PLL to 40MHz.
 	 * Copy the PLL programming code to the internal RAM and execute it
 	 *----------------------------------------------------------------------*/
-	lis	r3, CFG_MONITOR_BASE@h
-	ori	r3, r3, CFG_MONITOR_BASE@l
+	lis	r3, CONFIG_SYS_MONITOR_BASE@h
+	ori	r3, r3, CONFIG_SYS_MONITOR_BASE@l
 	addi	r3, r3, pll_prog_code_start - _start + EXC_OFF_SYS_RESET
 
-	lis	r4, CFG_INIT_RAM_ADDR@h
-	ori	r4, r4, CFG_INIT_RAM_ADDR@l
+	lis	r4, CONFIG_SYS_INIT_RAM_ADDR@h
+	ori	r4, r4, CONFIG_SYS_INIT_RAM_ADDR@l
 	mtlr	r4
 	addis	r5,0,0x0
 	ori	r5,r5,((pll_prog_code_end - pll_prog_code_start) >>2)
@@ -144,8 +145,8 @@ boot_warm:
 	 * Calculate absolute address in FLASH and jump there
 	 *----------------------------------------------------------------------*/
 
-	lis	r3, CFG_MONITOR_BASE@h
-	ori	r3, r3, CFG_MONITOR_BASE@l
+	lis	r3, CONFIG_SYS_MONITOR_BASE@h
+	ori	r3, r3, CONFIG_SYS_MONITOR_BASE@l
 	addi	r3, r3, in_flash - _start + EXC_OFF_SYS_RESET
 	mtlr	r3
 	blr
@@ -155,9 +156,9 @@ in_flash:
 	/* Initialize some SPRs that are hard to access from C			*/
 	/*----------------------------------------------------------------------*/
 
-	lis     r3, CFG_IMMR@h			/* Pass IMMR as arg1 to C routine */
-	lis	r2, CFG_INIT_SP_ADDR@h
-	ori	r1, r2, CFG_INIT_SP_ADDR@l	/* Set up the stack in internal SRAM */
+	lis     r3, CONFIG_SYS_IMMR@h			/* Pass IMMR as arg1 to C routine */
+	lis	r2, CONFIG_SYS_INIT_SP_ADDR@h
+	ori	r1, r2, CONFIG_SYS_INIT_SP_ADDR@l	/* Set up the stack in internal SRAM */
 	/* Note: R0 is still 0 here */
 	stwu	r0, -4(r1)			/* Clear final stack frame so that	*/
 	stwu	r0, -4(r1)			/* stack backtraces terminate cleanly	*/
@@ -173,8 +174,8 @@ in_flash:
 
 	/* Set up debug mode entry */
 
-	lis	r2, CFG_DER@h
-	ori	r2, r2, CFG_DER@l
+	lis	r2, CONFIG_SYS_DER@h
+	ori	r2, r2, CONFIG_SYS_DER@l
 	mtspr	DER, r2
 
 	/* Let the C-code set up the rest					*/
@@ -385,15 +386,15 @@ relocate_code:
 	mr	r10, r5		/* Save copy of monitor destination Address in SRAM */
 
 	mr	r3,  r5				/* Destination Address	*/
-	lis	r4, CFG_MONITOR_BASE@h		/* Source      Address	*/
-	ori	r4, r4, CFG_MONITOR_BASE@l
+	lis	r4, CONFIG_SYS_MONITOR_BASE@h		/* Source      Address	*/
+	ori	r4, r4, CONFIG_SYS_MONITOR_BASE@l
 	lwz	r5, GOT(__init_end)
 	sub	r5, r5, r4
 
 	/*
 	 * Fix GOT pointer:
 	 *
-	 * New GOT-PTR = (old GOT-PTR - CFG_MONITOR_BASE) + Destination Address
+	 * New GOT-PTR = (old GOT-PTR - CONFIG_SYS_MONITOR_BASE) + Destination Address
 	 *
 	 * Offset:
 	 */
@@ -581,15 +582,15 @@ trap_reloc:
 #if defined(CONFIG_PATI)
 /* Program the PLL */
 pll_prog_code_start:
-	lis	r4, (CFG_IMMR + 0x002fc384)@h
-	ori	r4, r4, (CFG_IMMR + 0x002fc384)@l
+	lis	r4, (CONFIG_SYS_IMMR + 0x002fc384)@h
+	ori	r4, r4, (CONFIG_SYS_IMMR + 0x002fc384)@l
 	lis	r3, (0x55ccaa33)@h
 	ori	r3, r3, (0x55ccaa33)@l
 	stw	r3, 0(r4)
-	lis	r4, (CFG_IMMR + 0x002fc284)@h
-	ori	r4, r4, (CFG_IMMR + 0x002fc284)@l
-	lis	r3, CFG_PLPRCR@h
-	ori	r3, r3, CFG_PLPRCR@l
+	lis	r4, (CONFIG_SYS_IMMR + 0x002fc284)@h
+	ori	r4, r4, (CONFIG_SYS_IMMR + 0x002fc284)@l
+	lis	r3, CONFIG_SYS_PLPRCR@h
+	ori	r3, r3, CONFIG_SYS_PLPRCR@l
 	stw	r3, 0(r4)
 	addis	r3,0,0x0
 	ori	r3,r3,0xA000
diff --git a/cpu/mpc5xx/u-boot.lds b/cpu/mpc5xx/u-boot.lds
index 7434e3fb6..bf52179c5 100644
--- a/cpu/mpc5xx/u-boot.lds
+++ b/cpu/mpc5xx/u-boot.lds
@@ -126,6 +126,7 @@ SECTIONS
    *(.dynbss)
    *(.bss)
    *(COMMON)
+   . = ALIGN(4);
   }
 
   _end = . ;
@@ -133,7 +134,7 @@ SECTIONS
 /*   . = env_start;
 	.ppcenv	:
 	{
-		common/environment.o (.ppcenv)
+		common/env_embedded.o (.ppcenv)
 	}
 */
 }
diff --git a/cpu/mpc5xxx/cpu.c b/cpu/mpc5xxx/cpu.c
index 0ed289963..9c6ab76a6 100644
--- a/cpu/mpc5xxx/cpu.c
+++ b/cpu/mpc5xxx/cpu.c
@@ -29,6 +29,7 @@
 #include <watchdog.h>
 #include <command.h>
 #include <mpc5xxx.h>
+#include <netdev.h>
 #include <asm/io.h>
 #include <asm/processor.h>
 
@@ -117,7 +118,7 @@ unsigned long get_tbclk (void)
 #if defined(CONFIG_OF_LIBFDT) && defined (CONFIG_OF_BOARD_SETUP)
 void ft_cpu_setup(void *blob, bd_t *bd)
 {
-	int div = in_8((void*)CFG_MBAR + 0x204) & 0x0020 ? 8 : 4;
+	int div = in_8((void*)CONFIG_SYS_MBAR + 0x204) & 0x0020 ? 8 : 4;
 	char * cpu_path = "/cpus/" OF_CPU;
 #ifdef CONFIG_MPC5xxx_FEC
 	char * eth_path = "/" OF_SOC "/ethernet@3000";
@@ -155,3 +156,15 @@ ulong bootcount_load (void)
 		return (*save_addr & 0x0000ffff);
 }
 #endif /* CONFIG_BOOTCOUNT_LIMIT */
+
+#ifdef CONFIG_MPC5xxx_FEC
+/* Default initializations for FEC controllers.  To override,
+ * create a board-specific function called:
+ * 	int board_eth_init(bd_t *bis)
+ */
+
+int cpu_eth_init(bd_t *bis)
+{
+	return mpc5xxx_fec_initialize(bis);
+}
+#endif
diff --git a/cpu/mpc5xxx/cpu_init.c b/cpu/mpc5xxx/cpu_init.c
index bc6201ec0..14bd417d7 100644
--- a/cpu/mpc5xxx/cpu_init.c
+++ b/cpu/mpc5xxx/cpu_init.c
@@ -35,11 +35,11 @@ DECLARE_GLOBAL_DATA_PTR;
 void cpu_init_f (void)
 {
 	unsigned long addecr = (1 << 25); /* Boot_CS */
-#if defined(CFG_RAMBOOT) && defined(CONFIG_MGT5100)
+#if defined(CONFIG_SYS_RAMBOOT) && defined(CONFIG_MGT5100)
 	addecr |= (1 << 22); /* SDRAM enable */
 #endif
 	/* Pointer is writable since we allocated a register for it */
-	gd = (gd_t *) (CFG_INIT_RAM_ADDR + CFG_GBL_DATA_OFFSET);
+	gd = (gd_t *) (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET);
 
 	/* Clear initial global data */
 	memset ((void *) gd, 0, sizeof (gd_t));
@@ -47,95 +47,95 @@ void cpu_init_f (void)
 	/*
 	 * Memory Controller: configure chip selects and enable them
 	 */
-#if defined(CFG_BOOTCS_START) && defined(CFG_BOOTCS_SIZE)
-	*(vu_long *)MPC5XXX_BOOTCS_START = START_REG(CFG_BOOTCS_START);
-	*(vu_long *)MPC5XXX_BOOTCS_STOP = STOP_REG(CFG_BOOTCS_START,
-			CFG_BOOTCS_SIZE);
+#if defined(CONFIG_SYS_BOOTCS_START) && defined(CONFIG_SYS_BOOTCS_SIZE)
+	*(vu_long *)MPC5XXX_BOOTCS_START = START_REG(CONFIG_SYS_BOOTCS_START);
+	*(vu_long *)MPC5XXX_BOOTCS_STOP = STOP_REG(CONFIG_SYS_BOOTCS_START,
+			CONFIG_SYS_BOOTCS_SIZE);
 #endif
-#if defined(CFG_BOOTCS_CFG)
-	*(vu_long *)MPC5XXX_BOOTCS_CFG = CFG_BOOTCS_CFG;
+#if defined(CONFIG_SYS_BOOTCS_CFG)
+	*(vu_long *)MPC5XXX_BOOTCS_CFG = CONFIG_SYS_BOOTCS_CFG;
 #endif
 
-#if defined(CFG_CS0_START) && defined(CFG_CS0_SIZE)
-	*(vu_long *)MPC5XXX_CS0_START = START_REG(CFG_CS0_START);
-	*(vu_long *)MPC5XXX_CS0_STOP = STOP_REG(CFG_CS0_START, CFG_CS0_SIZE);
+#if defined(CONFIG_SYS_CS0_START) && defined(CONFIG_SYS_CS0_SIZE)
+	*(vu_long *)MPC5XXX_CS0_START = START_REG(CONFIG_SYS_CS0_START);
+	*(vu_long *)MPC5XXX_CS0_STOP = STOP_REG(CONFIG_SYS_CS0_START, CONFIG_SYS_CS0_SIZE);
 	/* CS0 and BOOT_CS cannot be enabled at once. */
 	/*	addecr |= (1 << 16); */
 #endif
-#if defined(CFG_CS0_CFG)
-	*(vu_long *)MPC5XXX_CS0_CFG = CFG_CS0_CFG;
+#if defined(CONFIG_SYS_CS0_CFG)
+	*(vu_long *)MPC5XXX_CS0_CFG = CONFIG_SYS_CS0_CFG;
 #endif
 
-#if defined(CFG_CS1_START) && defined(CFG_CS1_SIZE)
-	*(vu_long *)MPC5XXX_CS1_START = START_REG(CFG_CS1_START);
-	*(vu_long *)MPC5XXX_CS1_STOP = STOP_REG(CFG_CS1_START, CFG_CS1_SIZE);
+#if defined(CONFIG_SYS_CS1_START) && defined(CONFIG_SYS_CS1_SIZE)
+	*(vu_long *)MPC5XXX_CS1_START = START_REG(CONFIG_SYS_CS1_START);
+	*(vu_long *)MPC5XXX_CS1_STOP = STOP_REG(CONFIG_SYS_CS1_START, CONFIG_SYS_CS1_SIZE);
 	addecr |= (1 << 17);
 #endif
-#if defined(CFG_CS1_CFG)
-	*(vu_long *)MPC5XXX_CS1_CFG = CFG_CS1_CFG;
+#if defined(CONFIG_SYS_CS1_CFG)
+	*(vu_long *)MPC5XXX_CS1_CFG = CONFIG_SYS_CS1_CFG;
 #endif
 
-#if defined(CFG_CS2_START) && defined(CFG_CS2_SIZE)
-	*(vu_long *)MPC5XXX_CS2_START = START_REG(CFG_CS2_START);
-	*(vu_long *)MPC5XXX_CS2_STOP = STOP_REG(CFG_CS2_START, CFG_CS2_SIZE);
+#if defined(CONFIG_SYS_CS2_START) && defined(CONFIG_SYS_CS2_SIZE)
+	*(vu_long *)MPC5XXX_CS2_START = START_REG(CONFIG_SYS_CS2_START);
+	*(vu_long *)MPC5XXX_CS2_STOP = STOP_REG(CONFIG_SYS_CS2_START, CONFIG_SYS_CS2_SIZE);
 	addecr |= (1 << 18);
 #endif
-#if defined(CFG_CS2_CFG)
-	*(vu_long *)MPC5XXX_CS2_CFG = CFG_CS2_CFG;
+#if defined(CONFIG_SYS_CS2_CFG)
+	*(vu_long *)MPC5XXX_CS2_CFG = CONFIG_SYS_CS2_CFG;
 #endif
 
-#if defined(CFG_CS3_START) && defined(CFG_CS3_SIZE)
-	*(vu_long *)MPC5XXX_CS3_START = START_REG(CFG_CS3_START);
-	*(vu_long *)MPC5XXX_CS3_STOP = STOP_REG(CFG_CS3_START, CFG_CS3_SIZE);
+#if defined(CONFIG_SYS_CS3_START) && defined(CONFIG_SYS_CS3_SIZE)
+	*(vu_long *)MPC5XXX_CS3_START = START_REG(CONFIG_SYS_CS3_START);
+	*(vu_long *)MPC5XXX_CS3_STOP = STOP_REG(CONFIG_SYS_CS3_START, CONFIG_SYS_CS3_SIZE);
 	addecr |= (1 << 19);
 #endif
-#if defined(CFG_CS3_CFG)
-	*(vu_long *)MPC5XXX_CS3_CFG = CFG_CS3_CFG;
+#if defined(CONFIG_SYS_CS3_CFG)
+	*(vu_long *)MPC5XXX_CS3_CFG = CONFIG_SYS_CS3_CFG;
 #endif
 
-#if defined(CFG_CS4_START) && defined(CFG_CS4_SIZE)
-	*(vu_long *)MPC5XXX_CS4_START = START_REG(CFG_CS4_START);
-	*(vu_long *)MPC5XXX_CS4_STOP = STOP_REG(CFG_CS4_START, CFG_CS4_SIZE);
+#if defined(CONFIG_SYS_CS4_START) && defined(CONFIG_SYS_CS4_SIZE)
+	*(vu_long *)MPC5XXX_CS4_START = START_REG(CONFIG_SYS_CS4_START);
+	*(vu_long *)MPC5XXX_CS4_STOP = STOP_REG(CONFIG_SYS_CS4_START, CONFIG_SYS_CS4_SIZE);
 	addecr |= (1 << 20);
 #endif
-#if defined(CFG_CS4_CFG)
-	*(vu_long *)MPC5XXX_CS4_CFG = CFG_CS4_CFG;
+#if defined(CONFIG_SYS_CS4_CFG)
+	*(vu_long *)MPC5XXX_CS4_CFG = CONFIG_SYS_CS4_CFG;
 #endif
 
-#if defined(CFG_CS5_START) && defined(CFG_CS5_SIZE)
-	*(vu_long *)MPC5XXX_CS5_START = START_REG(CFG_CS5_START);
-	*(vu_long *)MPC5XXX_CS5_STOP = STOP_REG(CFG_CS5_START, CFG_CS5_SIZE);
+#if defined(CONFIG_SYS_CS5_START) && defined(CONFIG_SYS_CS5_SIZE)
+	*(vu_long *)MPC5XXX_CS5_START = START_REG(CONFIG_SYS_CS5_START);
+	*(vu_long *)MPC5XXX_CS5_STOP = STOP_REG(CONFIG_SYS_CS5_START, CONFIG_SYS_CS5_SIZE);
 	addecr |= (1 << 21);
 #endif
-#if defined(CFG_CS5_CFG)
-	*(vu_long *)MPC5XXX_CS5_CFG = CFG_CS5_CFG;
+#if defined(CONFIG_SYS_CS5_CFG)
+	*(vu_long *)MPC5XXX_CS5_CFG = CONFIG_SYS_CS5_CFG;
 #endif
 
 #if defined(CONFIG_MPC5200)
 	addecr |= 1;
-#if defined(CFG_CS6_START) && defined(CFG_CS6_SIZE)
-	*(vu_long *)MPC5XXX_CS6_START = START_REG(CFG_CS6_START);
-	*(vu_long *)MPC5XXX_CS6_STOP = STOP_REG(CFG_CS6_START, CFG_CS6_SIZE);
+#if defined(CONFIG_SYS_CS6_START) && defined(CONFIG_SYS_CS6_SIZE)
+	*(vu_long *)MPC5XXX_CS6_START = START_REG(CONFIG_SYS_CS6_START);
+	*(vu_long *)MPC5XXX_CS6_STOP = STOP_REG(CONFIG_SYS_CS6_START, CONFIG_SYS_CS6_SIZE);
 	addecr |= (1 << 26);
 #endif
-#if defined(CFG_CS6_CFG)
-	*(vu_long *)MPC5XXX_CS6_CFG = CFG_CS6_CFG;
+#if defined(CONFIG_SYS_CS6_CFG)
+	*(vu_long *)MPC5XXX_CS6_CFG = CONFIG_SYS_CS6_CFG;
 #endif
 
-#if defined(CFG_CS7_START) && defined(CFG_CS7_SIZE)
-	*(vu_long *)MPC5XXX_CS7_START = START_REG(CFG_CS7_START);
-	*(vu_long *)MPC5XXX_CS7_STOP = STOP_REG(CFG_CS7_START, CFG_CS7_SIZE);
+#if defined(CONFIG_SYS_CS7_START) && defined(CONFIG_SYS_CS7_SIZE)
+	*(vu_long *)MPC5XXX_CS7_START = START_REG(CONFIG_SYS_CS7_START);
+	*(vu_long *)MPC5XXX_CS7_STOP = STOP_REG(CONFIG_SYS_CS7_START, CONFIG_SYS_CS7_SIZE);
 	addecr |= (1 << 27);
 #endif
-#if defined(CFG_CS7_CFG)
-	*(vu_long *)MPC5XXX_CS7_CFG = CFG_CS7_CFG;
+#if defined(CONFIG_SYS_CS7_CFG)
+	*(vu_long *)MPC5XXX_CS7_CFG = CONFIG_SYS_CS7_CFG;
 #endif
 
-#if defined(CFG_CS_BURST)
-	*(vu_long *)MPC5XXX_CS_BURST = CFG_CS_BURST;
+#if defined(CONFIG_SYS_CS_BURST)
+	*(vu_long *)MPC5XXX_CS_BURST = CONFIG_SYS_CS_BURST;
 #endif
-#if defined(CFG_CS_DEADCYCLE)
-	*(vu_long *)MPC5XXX_CS_DEADCYCLE = CFG_CS_DEADCYCLE;
+#if defined(CONFIG_SYS_CS_DEADCYCLE)
+	*(vu_long *)MPC5XXX_CS_DEADCYCLE = CONFIG_SYS_CS_DEADCYCLE;
 #endif
 #endif /* CONFIG_MPC5200 */
 
@@ -144,8 +144,8 @@ void cpu_init_f (void)
 	*(vu_long *)MPC5XXX_CS_CTRL = (1 << 24);
 
 	/* Setup pin multiplexing */
-#if defined(CFG_GPS_PORT_CONFIG)
-	*(vu_long *)MPC5XXX_GPS_PORT_CONFIG = CFG_GPS_PORT_CONFIG;
+#if defined(CONFIG_SYS_GPS_PORT_CONFIG)
+	*(vu_long *)MPC5XXX_GPS_PORT_CONFIG = CONFIG_SYS_GPS_PORT_CONFIG;
 #endif
 
 #if defined(CONFIG_MPC5200)
@@ -154,28 +154,28 @@ void cpu_init_f (void)
 
 	/* Enable snooping for RAM */
 	*(vu_long *)(MPC5XXX_XLBARB + 0x40) |= (1 << 15);
-	*(vu_long *)(MPC5XXX_XLBARB + 0x70) = CFG_SDRAM_BASE | 0x1d;
+	*(vu_long *)(MPC5XXX_XLBARB + 0x70) = CONFIG_SYS_SDRAM_BASE | 0x1d;
 
-# if defined(CFG_IPBCLK_EQUALS_XLBCLK)
+# if defined(CONFIG_SYS_IPBCLK_EQUALS_XLBCLK)
 	/* Motorola reports IPB should better run at 133 MHz. */
 	*(vu_long *)MPC5XXX_ADDECR |= 1;
 	/* pci_clk_sel = 0x02, ipb_clk_sel = 0x00; */
 	addecr = *(vu_long *)MPC5XXX_CDM_CFG;
 	addecr &= ~0x103;
-#  if defined(CFG_PCICLK_EQUALS_IPBCLK_DIV2)
+#  if defined(CONFIG_SYS_PCICLK_EQUALS_IPBCLK_DIV2)
 	/* pci_clk_sel = 0x01 -> IPB_CLK/2 */
 	addecr |= 0x01;
 #  else
 	/* pci_clk_sel = 0x02 -> XLB_CLK/4 = IPB_CLK/4 */
 	addecr |= 0x02;
-#  endif /* CFG_PCICLK_EQUALS_IPBCLK_DIV2 */
+#  endif /* CONFIG_SYS_PCICLK_EQUALS_IPBCLK_DIV2 */
 	*(vu_long *)MPC5XXX_CDM_CFG = addecr;
-# endif	/* CFG_IPBCLK_EQUALS_XLBCLK */
+# endif	/* CONFIG_SYS_IPBCLK_EQUALS_XLBCLK */
 	/* Configure the XLB Arbiter */
 	*(vu_long *)MPC5XXX_XLBARB_MPRIEN = 0xff;
 	*(vu_long *)MPC5XXX_XLBARB_MPRIVAL = 0x11111111;
 
-# if defined(CFG_XLB_PIPELINING)
+# if defined(CONFIG_SYS_XLB_PIPELINING)
 	/* Enable piplining */
 	*(vu_long *)(MPC5XXX_XLBARB + 0x40) &= ~(1 << 31);
 # endif
diff --git a/cpu/mpc5xxx/firmware_sc_task_bestcomm.impl.S b/cpu/mpc5xxx/firmware_sc_task_bestcomm.impl.S
index a07c77699..d140c7e98 100644
--- a/cpu/mpc5xxx/firmware_sc_task_bestcomm.impl.S
+++ b/cpu/mpc5xxx/firmware_sc_task_bestcomm.impl.S
@@ -23,7 +23,7 @@ scEthernetRecv_Entry:		/* Task 0 */
 .long   0x00000000
 .long   0x00000000
 .long   scEthernetRecv_CSave - taskTable	/* Task 0 context save space */
-.long   CFG_MBAR
+.long   CONFIG_SYS_MBAR
 .globl scEthernetXmit_Entry
 scEthernetXmit_Entry:		/* Task 1 */
 .long   scEthernetXmit_TDT - taskTable	/* Task 1 Descriptor Table */
@@ -33,7 +33,7 @@ scEthernetXmit_Entry:		/* Task 1 */
 .long   0x00000000
 .long   0x00000000
 .long   scEthernetXmit_CSave - taskTable	/* Task 1 context save space */
-.long   CFG_MBAR
+.long   CONFIG_SYS_MBAR
 
 
 .globl scEthernetRecv_TDT
@@ -151,7 +151,7 @@ scEthernetRecv_VarTab:	/* Task 0 Variable Table */
 .long   0x00000000	/* var[6] */
 .long   0x00000000	/* var[7] */
 .long   0x00000000	/* var[8] */
-.long   (CFG_MBAR + 0x8800)	/* var[9] */
+.long   (CONFIG_SYS_MBAR + 0x8800)	/* var[9] */
 .long   0x00000008	/* var[10] */
 .long   0x0000000c	/* var[11] */
 .long   0x80000000	/* var[12] */
@@ -190,7 +190,7 @@ scEthernetXmit_VarTab:	/* Task 1 Variable Table */
 .long   0x00000000	/* var[8] */
 .long   0x00000000	/* var[9] */
 .long   0x00000000	/* var[10] */
-.long   (CFG_MBAR + 0x8800)	/* var[11] */
+.long   (CONFIG_SYS_MBAR + 0x8800)	/* var[11] */
 .long   0x00000000	/* var[12] */
 .long   0x80000000	/* var[13] */
 .long   0x10000000	/* var[14] */
diff --git a/cpu/mpc5xxx/i2c.c b/cpu/mpc5xxx/i2c.c
index 0f02e78a3..7d76274ad 100644
--- a/cpu/mpc5xxx/i2c.c
+++ b/cpu/mpc5xxx/i2c.c
@@ -30,12 +30,12 @@ DECLARE_GLOBAL_DATA_PTR;
 #include <mpc5xxx.h>
 #include <i2c.h>
 
-#if (CFG_I2C_MODULE == 2)
+#if (CONFIG_SYS_I2C_MODULE == 2)
 #define I2C_BASE	MPC5XXX_I2C2
-#elif (CFG_I2C_MODULE == 1)
+#elif (CONFIG_SYS_I2C_MODULE == 1)
 #define I2C_BASE	MPC5XXX_I2C1
 #else
-#error CFG_I2C_MODULE is not properly configured
+#error CONFIG_SYS_I2C_MODULE is not properly configured
 #endif
 
 #define I2C_TIMEOUT	100
@@ -380,20 +380,4 @@ Done:
 	return ret;
 }
 
-uchar i2c_reg_read(uchar chip, uchar reg)
-{
-	uchar buf;
-
-	i2c_read(chip, reg, 1, &buf, 1);
-
-	return buf;
-}
-
-void i2c_reg_write(uchar chip, uchar reg, uchar val)
-{
-	i2c_write(chip, reg, 1, &val, 1);
-
-	return;
-}
-
 #endif	/* CONFIG_HARD_I2C */
diff --git a/cpu/mpc5xxx/interrupts.c b/cpu/mpc5xxx/interrupts.c
index 8816dd1e2..6035771ee 100644
--- a/cpu/mpc5xxx/interrupts.c
+++ b/cpu/mpc5xxx/interrupts.c
@@ -229,7 +229,7 @@ int mpc5xxx_get_irq(struct pt_regs *regs)
 
 int interrupt_init_cpu(ulong * decrementer_count)
 {
-	*decrementer_count = get_tbclk() / CFG_HZ;
+	*decrementer_count = get_tbclk() / CONFIG_SYS_HZ;
 
 	mpc5xxx_init_irq();
 
diff --git a/cpu/mpc5xxx/pci_mpc5200.c b/cpu/mpc5xxx/pci_mpc5200.c
index 2f01d5ce9..a3251abf5 100644
--- a/cpu/mpc5xxx/pci_mpc5200.c
+++ b/cpu/mpc5xxx/pci_mpc5200.c
@@ -31,8 +31,8 @@
 #include <mpc5xxx.h>
 
 /* System RAM mapped over PCI */
-#define CONFIG_PCI_MEMORY_BUS	CFG_SDRAM_BASE
-#define CONFIG_PCI_MEMORY_PHYS	CFG_SDRAM_BASE
+#define CONFIG_PCI_MEMORY_BUS	CONFIG_SYS_SDRAM_BASE
+#define CONFIG_PCI_MEMORY_PHYS	CONFIG_SYS_SDRAM_BASE
 #define CONFIG_PCI_MEMORY_SIZE	(1024 * 1024 * 1024)
 
 /* PCIIWCR bit fields */
@@ -125,11 +125,11 @@ void pci_mpc5xxx_init (struct pci_controller *hose)
 
 	/* Set cache line size */
 	*(vu_long *)MPC5XXX_PCI_CFG = (*(vu_long *)MPC5XXX_PCI_CFG & ~0xff) |
-		(CFG_CACHELINE_SIZE / 4);
+		(CONFIG_SYS_CACHELINE_SIZE / 4);
 
 	/* Map MBAR to PCI space */
-	*(vu_long *)MPC5XXX_PCI_BAR0 = CFG_MBAR;
-	*(vu_long *)MPC5XXX_PCI_TBATR0 = CFG_MBAR | 1;
+	*(vu_long *)MPC5XXX_PCI_BAR0 = CONFIG_SYS_MBAR;
+	*(vu_long *)MPC5XXX_PCI_TBATR0 = CONFIG_SYS_MBAR | 1;
 
 	/* Map RAM to PCI space */
 	*(vu_long *)MPC5XXX_PCI_BAR1 = CONFIG_PCI_MEMORY_BUS | (1 << 3);
diff --git a/cpu/mpc5xxx/serial.c b/cpu/mpc5xxx/serial.c
index 430d63f74..a8a384aa5 100644
--- a/cpu/mpc5xxx/serial.c
+++ b/cpu/mpc5xxx/serial.c
@@ -106,7 +106,7 @@ int serial_init (void)
 	/* select clock sources */
 #if defined(CONFIG_MGT5100)
 	psc->psc_clock_select = 0xdd00;
-	baseclk = (CFG_MPC5XXX_CLKIN + 16) / 32;
+	baseclk = (CONFIG_SYS_MPC5XXX_CLKIN + 16) / 32;
 #elif defined(CONFIG_MPC5200)
 	psc->psc_clock_select = 0;
 	baseclk = (gd->ipb_clk + 16) / 32;
@@ -247,7 +247,7 @@ void serial_setbrg(void)
 	unsigned long baseclk, div;
 
 #if defined(CONFIG_MGT5100)
-	baseclk = (CFG_MPC5XXX_CLKIN + 16) / 32;
+	baseclk = (CONFIG_SYS_MPC5XXX_CLKIN + 16) / 32;
 #elif defined(CONFIG_MPC5200)
 	baseclk = (gd->ipb_clk + 16) / 32;
 #endif
diff --git a/cpu/mpc5xxx/speed.c b/cpu/mpc5xxx/speed.c
index 7847adcef..8027d3e08 100644
--- a/cpu/mpc5xxx/speed.c
+++ b/cpu/mpc5xxx/speed.c
@@ -47,15 +47,15 @@ int get_clocks (void)
 {
 	ulong val, vco;
 
-#if !defined(CFG_MPC5XXX_CLKIN)
-#error clock measuring not implemented yet - define CFG_MPC5XXX_CLKIN
+#if !defined(CONFIG_SYS_MPC5XXX_CLKIN)
+#error clock measuring not implemented yet - define CONFIG_SYS_MPC5XXX_CLKIN
 #endif
 
 	val = *(vu_long *)MPC5XXX_CDM_PORCFG;
 	if (val & (1 << 6)) {
-		vco = CFG_MPC5XXX_CLKIN * 12;
+		vco = CONFIG_SYS_MPC5XXX_CLKIN * 12;
 	} else {
-		vco = CFG_MPC5XXX_CLKIN * 16;
+		vco = CONFIG_SYS_MPC5XXX_CLKIN * 16;
 	}
 	if (val & (1 << 5)) {
 		gd->bus_clk = vco / 8;
@@ -81,10 +81,13 @@ int get_clocks (void)
 
 int prt_mpc5xxx_clks (void)
 {
-	printf("       Bus %ld MHz, IPB %ld MHz, PCI %ld MHz\n",
-			gd->bus_clk / 1000000, gd->ipb_clk / 1000000,
-			gd->pci_clk / 1000000);
+	char buf1[32], buf2[32], buf3[32];
 
+	printf ("       Bus %s MHz, IPB %s MHz, PCI %s MHz\n",
+		strmhz(buf1, gd->bus_clk),
+		strmhz(buf2, gd->ipb_clk),
+		strmhz(buf3, gd->pci_clk)
+	);
 	return (0);
 }
 
diff --git a/cpu/mpc5xxx/start.S b/cpu/mpc5xxx/start.S
index 9b1bd48c7..6b1162aa5 100644
--- a/cpu/mpc5xxx/start.S
+++ b/cpu/mpc5xxx/start.S
@@ -27,6 +27,7 @@
  */
 #include <config.h>
 #include <mpc5xxx.h>
+#include <timestamp.h>
 #include <version.h>
 
 #define CONFIG_MPC5xxx 1	/* needed for Linux kernel header files */
@@ -78,7 +79,7 @@
 	.globl	version_string
 version_string:
 	.ascii U_BOOT_VERSION
-	.ascii " (", __DATE__, " - ", __TIME__, ")"
+	.ascii " (", U_BOOT_DATE, " - ", U_BOOT_TIME, ")"
 	.ascii CONFIG_IDENT_STRING, "\0"
 
 /*
@@ -106,19 +107,19 @@ boot_warm:
 	/* Move CSBoot and adjust instruction pointer                   */
 	/*--------------------------------------------------------------*/
 
-#if defined(CFG_LOWBOOT)
-# if defined(CFG_RAMBOOT)
-#  error CFG_LOWBOOT is incompatible with CFG_RAMBOOT
-# endif /* CFG_RAMBOOT */
+#if defined(CONFIG_SYS_LOWBOOT)
+# if defined(CONFIG_SYS_RAMBOOT)
+#  error CONFIG_SYS_LOWBOOT is incompatible with CONFIG_SYS_RAMBOOT
+# endif /* CONFIG_SYS_RAMBOOT */
 # if defined(CONFIG_MGT5100)
-#  error CFG_LOWBOOT is incompatible with MGT5100
+#  error CONFIG_SYS_LOWBOOT is incompatible with MGT5100
 # endif /* CONFIG_MGT5100 */
-	lis	r4, CFG_DEFAULT_MBAR@h
-	lis	r3,	START_REG(CFG_BOOTCS_START)@h
-	ori	r3, r3, START_REG(CFG_BOOTCS_START)@l
+	lis	r4, CONFIG_SYS_DEFAULT_MBAR@h
+	lis	r3,	START_REG(CONFIG_SYS_BOOTCS_START)@h
+	ori	r3, r3, START_REG(CONFIG_SYS_BOOTCS_START)@l
 	stw	r3, 0x4(r4)		/* CS0 start */
-	lis	r3,	STOP_REG(CFG_BOOTCS_START, CFG_BOOTCS_SIZE)@h
-	ori	r3, r3, STOP_REG(CFG_BOOTCS_START, CFG_BOOTCS_SIZE)@l
+	lis	r3,	STOP_REG(CONFIG_SYS_BOOTCS_START, CONFIG_SYS_BOOTCS_SIZE)@h
+	ori	r3, r3, STOP_REG(CONFIG_SYS_BOOTCS_START, CONFIG_SYS_BOOTCS_SIZE)@l
 	stw	r3, 0x8(r4)		/* CS0 stop */
 	lis	r3,     0x02010000@h
 	ori	r3, r3, 0x02010000@l
@@ -130,20 +131,20 @@ boot_warm:
 	blr
 
 lowboot_reentry:
-	lis	r3,	START_REG(CFG_BOOTCS_START)@h
-	ori	r3, r3, START_REG(CFG_BOOTCS_START)@l
+	lis	r3,	START_REG(CONFIG_SYS_BOOTCS_START)@h
+	ori	r3, r3, START_REG(CONFIG_SYS_BOOTCS_START)@l
 	stw	r3, 0x4c(r4)		/* Boot start */
-	lis	r3,	STOP_REG(CFG_BOOTCS_START, CFG_BOOTCS_SIZE)@h
-	ori	r3, r3, STOP_REG(CFG_BOOTCS_START, CFG_BOOTCS_SIZE)@l
+	lis	r3,	STOP_REG(CONFIG_SYS_BOOTCS_START, CONFIG_SYS_BOOTCS_SIZE)@h
+	ori	r3, r3, STOP_REG(CONFIG_SYS_BOOTCS_START, CONFIG_SYS_BOOTCS_SIZE)@l
 	stw	r3, 0x50(r4)		/* Boot stop */
 	lis	r3,     0x02000001@h
 	ori	r3, r3, 0x02000001@l
 	stw	r3, 0x54(r4)		/* Boot enable, CS0 disable */
-#endif	/* CFG_LOWBOOT */
+#endif	/* CONFIG_SYS_LOWBOOT */
 
-#if defined(CFG_DEFAULT_MBAR) && !defined(CFG_RAMBOOT)
-	lis	r3, CFG_MBAR@h
-	ori	r3, r3, CFG_MBAR@l
+#if defined(CONFIG_SYS_DEFAULT_MBAR) && !defined(CONFIG_SYS_RAMBOOT)
+	lis	r3, CONFIG_SYS_MBAR@h
+	ori	r3, r3, CONFIG_SYS_MBAR@l
 #if defined(CONFIG_MPC5200)
 	/* MBAR is mirrored into the MBAR SPR */
 	mtspr	MBAR,r3
@@ -152,9 +153,9 @@ lowboot_reentry:
 #if defined(CONFIG_MGT5100)
 	rlwinm	r3, r3, 17, 15, 31
 #endif
-	lis	r4, CFG_DEFAULT_MBAR@h
+	lis	r4, CONFIG_SYS_DEFAULT_MBAR@h
 	stw	r3, 0(r4)
-#endif /* CFG_DEFAULT_MBAR */
+#endif /* CONFIG_SYS_DEFAULT_MBAR */
 
 	/* Initialise the MPC5xxx processor core			*/
 	/*--------------------------------------------------------------*/
@@ -165,9 +166,9 @@ lowboot_reentry:
 	/*--------------------------------------------------------------*/
 
 	/* set up stack in on-chip SRAM */
-	lis	r3, CFG_INIT_RAM_ADDR@h
-	ori	r3, r3, CFG_INIT_RAM_ADDR@l
-	ori	r1, r3, CFG_INIT_SP_OFFSET
+	lis	r3, CONFIG_SYS_INIT_RAM_ADDR@h
+	ori	r3, r3, CONFIG_SYS_INIT_RAM_ADDR@l
+	ori	r1, r3, CONFIG_SYS_INIT_SP_OFFSET
 	li	r0, 0			/* Make room for stack frame header and	*/
 	stwu	r0, -4(r1)		/* clear final stack frame so that	*/
 	stwu	r0, -4(r1)		/* stack backtraces terminate cleanly	*/
@@ -400,13 +401,13 @@ init_5xxx_core:
 	/* HID0 also contains cache control				*/
 	/*--------------------------------------------------------------*/
 
-	lis	r3, CFG_HID0_INIT@h
-	ori	r3, r3, CFG_HID0_INIT@l
+	lis	r3, CONFIG_SYS_HID0_INIT@h
+	ori	r3, r3, CONFIG_SYS_HID0_INIT@l
 	SYNC
 	mtspr	HID0, r3
 
-	lis	r3, CFG_HID0_FINAL@h
-	ori	r3, r3, CFG_HID0_FINAL@l
+	lis	r3, CONFIG_SYS_HID0_FINAL@h
+	ori	r3, r3, CONFIG_SYS_HID0_FINAL@l
 	SYNC
 	mtspr	HID0, r3
 
@@ -582,16 +583,16 @@ relocate_code:
 	mr	r10, r5		/* Save copy of Destination Address	*/
 
 	mr	r3,  r5				/* Destination Address	*/
-	lis	r4, CFG_MONITOR_BASE@h		/* Source      Address	*/
-	ori	r4, r4, CFG_MONITOR_BASE@l
+	lis	r4, CONFIG_SYS_MONITOR_BASE@h		/* Source      Address	*/
+	ori	r4, r4, CONFIG_SYS_MONITOR_BASE@l
 	lwz	r5, GOT(__init_end)
 	sub	r5, r5, r4
-	li	r6, CFG_CACHELINE_SIZE		/* Cache Line Size	*/
+	li	r6, CONFIG_SYS_CACHELINE_SIZE		/* Cache Line Size	*/
 
 	/*
 	 * Fix GOT pointer:
 	 *
-	 * New GOT-PTR = (old GOT-PTR - CFG_MONITOR_BASE) + Destination Address
+	 * New GOT-PTR = (old GOT-PTR - CONFIG_SYS_MONITOR_BASE) + Destination Address
 	 *
 	 * Offset:
 	 */
diff --git a/cpu/mpc5xxx/u-boot-customlayout.lds b/cpu/mpc5xxx/u-boot-customlayout.lds
index 38478601a..f6bb858a2 100644
--- a/cpu/mpc5xxx/u-boot-customlayout.lds
+++ b/cpu/mpc5xxx/u-boot-customlayout.lds
@@ -62,7 +62,7 @@ SECTIONS
     lib_ppc/time.o              (.text)
 
     . = DEFINED(env_offset) ? env_offset : .;
-    common/environment.o        (.ppcenv)
+    common/env_embedded.o        (.ppcenv)
 
     *(.text)
     *(.fixup)
@@ -129,6 +129,7 @@ SECTIONS
    *(.dynbss)
    *(.bss)
    *(COMMON)
+   . = ALIGN(4);
   }
   _end = . ;
   PROVIDE (end = .);
diff --git a/cpu/mpc5xxx/u-boot.lds b/cpu/mpc5xxx/u-boot.lds
index 13fffb808..8d1fa60d0 100644
--- a/cpu/mpc5xxx/u-boot.lds
+++ b/cpu/mpc5xxx/u-boot.lds
@@ -118,6 +118,7 @@ SECTIONS
    *(.dynbss)
    *(.bss)
    *(COMMON)
+   . = ALIGN(4);
   }
   _end = . ;
   PROVIDE (end = .);
diff --git a/cpu/mpc5xxx/usb.c b/cpu/mpc5xxx/usb.c
index ed467ab3b..8f2b66a51 100644
--- a/cpu/mpc5xxx/usb.c
+++ b/cpu/mpc5xxx/usb.c
@@ -23,7 +23,7 @@
 
 #include <common.h>
 
-#if defined(CONFIG_USB_OHCI_NEW) && defined(CFG_USB_OHCI_CPU_INIT)
+#if defined(CONFIG_USB_OHCI_NEW) && defined(CONFIG_SYS_USB_OHCI_CPU_INIT)
 
 #include <mpc5xxx.h>
 
@@ -51,4 +51,4 @@ int usb_cpu_init_fail(void)
 	return 0;
 }
 
-#endif /* defined(CONFIG_USB_OHCI) && defined(CFG_USB_OHCI_CPU_INIT) */
+#endif /* defined(CONFIG_USB_OHCI) && defined(CONFIG_SYS_USB_OHCI_CPU_INIT) */
diff --git a/cpu/mpc5xxx/usb_ohci.c b/cpu/mpc5xxx/usb_ohci.c
index 2ad12b2a2..4bf659df8 100644
--- a/cpu/mpc5xxx/usb_ohci.c
+++ b/cpu/mpc5xxx/usb_ohci.c
@@ -660,7 +660,7 @@ static void td_fill (ohci_t *ohci, unsigned int info,
 	td->index = index;
 	td->data = (__u32)data;
 #ifdef OHCI_FILL_TRACE
-	if ((usb_pipetype(urb_priv->pipe) == PIPE_BULK) && usb_pipeout(urb_priv->pipe)) {
+	if (usb_pipebulk(urb_priv->pipe) && usb_pipeout(urb_priv->pipe)) {
 		for (i = 0; i < len; i++)
 		printf("td->data[%d] %#2x ",i, ((unsigned char *)td->data)[i]);
 		printf("\n");
@@ -761,7 +761,7 @@ static void dl_transfer_length(td_t * td)
 	tdCBP  = ohci_cpu_to_le32 (td->hwCBP);
 
 
-	if (!(usb_pipetype (lurb_priv->pipe) == PIPE_CONTROL &&
+	if (!(usb_pipecontrol(lurb_priv->pipe) &&
 	    ((td->index == 0) || (td->index == lurb_priv->length - 1)))) {
 		if (tdBE != 0) {
 			if (td->hwCBP == 0)
@@ -1023,7 +1023,7 @@ static int ohci_submit_rh_msg(struct usb_device *dev, unsigned long pipe,
 urb_priv.actual_length = 0;
 pkt_print(dev, pipe, buffer, transfer_len, cmd, "SUB(rh)", usb_pipein(pipe));
 #endif
-	if ((pipe & PIPE_INTERRUPT) == PIPE_INTERRUPT) {
+	if (usb_pipeint(pipe)) {
 		info("Root-Hub submit IRQ: NOT implemented");
 		return 0;
 	}
@@ -1248,7 +1248,7 @@ int submit_common_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
 
 	/* allow more time for a BULK device to react - some are slow */
 #define BULK_TO	 5000	/* timeout in milliseconds */
-	if (usb_pipetype (pipe) == PIPE_BULK)
+	if (usb_pipebulk(pipe))
 		timeout = BULK_TO;
 	else
 		timeout = 100;
diff --git a/cpu/mpc8220/cpu.c b/cpu/mpc8220/cpu.c
index be274cde9..563cfe053 100644
--- a/cpu/mpc8220/cpu.c
+++ b/cpu/mpc8220/cpu.c
@@ -29,6 +29,7 @@
 #include <watchdog.h>
 #include <command.h>
 #include <mpc8220.h>
+#include <netdev.h>
 #include <asm/processor.h>
 
 DECLARE_GLOBAL_DATA_PTR;
@@ -42,7 +43,7 @@ int checkcpu (void)
 
 	printf (CPU_ID_STR);
 
-	printf (" (JTAG ID %08lx)", *(vu_long *) (CFG_MBAR + 0x50));
+	printf (" (JTAG ID %08lx)", *(vu_long *) (CONFIG_SYS_MBAR + 0x50));
 
 	printf (" at %s MHz\n", strmhz (buf, clock));
 
@@ -89,3 +90,15 @@ unsigned long get_tbclk (void)
 }
 
 /* ------------------------------------------------------------------------- */
+
+/*
+ * Initializes on-chip ethernet controllers.
+ * to override, implement board_eth_init()
+ */
+int cpu_eth_init(bd_t *bis)
+{
+#if defined(CONFIG_MPC8220_FEC)
+	mpc8220_fec_initialize(bis);
+#endif
+	return 0;
+}
diff --git a/cpu/mpc8220/cpu_init.c b/cpu/mpc8220/cpu_init.c
index 0daac5bbd..8f52c7dd0 100644
--- a/cpu/mpc8220/cpu_init.c
+++ b/cpu/mpc8220/cpu_init.c
@@ -39,7 +39,7 @@ void cpu_init_f (void)
 	volatile xlbarb8220_t *xlbarb = (volatile xlbarb8220_t *) MMAP_XLBARB;
 
 	/* Pointer is writable since we allocated a register for it */
-	gd = (gd_t *) (CFG_INIT_RAM_ADDR + CFG_GBL_DATA_OFFSET);
+	gd = (gd_t *) (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET);
 
 	/* Clear initial global data */
 	memset ((void *) gd, 0, sizeof (gd_t));
@@ -49,54 +49,54 @@ void cpu_init_f (void)
 	portcfg->pcfg1 = 0;
 	portcfg->pcfg2 = 0;
 	portcfg->pcfg3 = 0;
-	portcfg->pcfg2 = CFG_GP1_PORT2_CONFIG;
-	portcfg->pcfg3 = CFG_PCI_PORT3_CONFIG | CFG_GP2_PORT3_CONFIG;
+	portcfg->pcfg2 = CONFIG_SYS_GP1_PORT2_CONFIG;
+	portcfg->pcfg3 = CONFIG_SYS_PCI_PORT3_CONFIG | CONFIG_SYS_GP2_PORT3_CONFIG;
 
 	/*
 	 * Flexbus Controller: configure chip selects and enable them
 	 */
-#if defined (CFG_CS0_BASE)
-	flexbus->csar0 = CFG_CS0_BASE;
+#if defined (CONFIG_SYS_CS0_BASE)
+	flexbus->csar0 = CONFIG_SYS_CS0_BASE;
 
 /* Sorcery-C can hang-up after CTRL reg initialization */
-#if defined (CFG_CS0_CTRL)
-	flexbus->cscr0 = CFG_CS0_CTRL;
+#if defined (CONFIG_SYS_CS0_CTRL)
+	flexbus->cscr0 = CONFIG_SYS_CS0_CTRL;
 #endif
-	flexbus->csmr0 = ((CFG_CS0_MASK - 1) & 0xffff0000) | 1;
+	flexbus->csmr0 = ((CONFIG_SYS_CS0_MASK - 1) & 0xffff0000) | 1;
 	__asm__ volatile ("sync");
 #endif
-#if defined (CFG_CS1_BASE)
-	flexbus->csar1 = CFG_CS1_BASE;
-	flexbus->cscr1 = CFG_CS1_CTRL;
-	flexbus->csmr1 = ((CFG_CS1_MASK - 1) & 0xffff0000) | 1;
+#if defined (CONFIG_SYS_CS1_BASE)
+	flexbus->csar1 = CONFIG_SYS_CS1_BASE;
+	flexbus->cscr1 = CONFIG_SYS_CS1_CTRL;
+	flexbus->csmr1 = ((CONFIG_SYS_CS1_MASK - 1) & 0xffff0000) | 1;
 	__asm__ volatile ("sync");
 #endif
-#if defined (CFG_CS2_BASE)
-	flexbus->csar2 = CFG_CS2_BASE;
-	flexbus->cscr2 = CFG_CS2_CTRL;
-	flexbus->csmr2 = ((CFG_CS2_MASK - 1) & 0xffff0000) | 1;
-	portcfg->pcfg3 |= CFG_CS2_PORT3_CONFIG;
+#if defined (CONFIG_SYS_CS2_BASE)
+	flexbus->csar2 = CONFIG_SYS_CS2_BASE;
+	flexbus->cscr2 = CONFIG_SYS_CS2_CTRL;
+	flexbus->csmr2 = ((CONFIG_SYS_CS2_MASK - 1) & 0xffff0000) | 1;
+	portcfg->pcfg3 |= CONFIG_SYS_CS2_PORT3_CONFIG;
 	__asm__ volatile ("sync");
 #endif
-#if defined (CFG_CS3_BASE)
-	flexbus->csar3 = CFG_CS3_BASE;
-	flexbus->cscr3 = CFG_CS3_CTRL;
-	flexbus->csmr3 = ((CFG_CS3_MASK - 1) & 0xffff0000) | 1;
-	portcfg->pcfg3 |= CFG_CS3_PORT3_CONFIG;
+#if defined (CONFIG_SYS_CS3_BASE)
+	flexbus->csar3 = CONFIG_SYS_CS3_BASE;
+	flexbus->cscr3 = CONFIG_SYS_CS3_CTRL;
+	flexbus->csmr3 = ((CONFIG_SYS_CS3_MASK - 1) & 0xffff0000) | 1;
+	portcfg->pcfg3 |= CONFIG_SYS_CS3_PORT3_CONFIG;
 	__asm__ volatile ("sync");
 #endif
-#if defined (CFG_CS4_BASE)
-	flexbus->csar4 = CFG_CS4_BASE;
-	flexbus->cscr4 = CFG_CS4_CTRL;
-	flexbus->csmr4 = ((CFG_CS4_MASK - 1) & 0xffff0000) | 1;
-	portcfg->pcfg3 |= CFG_CS4_PORT3_CONFIG;
+#if defined (CONFIG_SYS_CS4_BASE)
+	flexbus->csar4 = CONFIG_SYS_CS4_BASE;
+	flexbus->cscr4 = CONFIG_SYS_CS4_CTRL;
+	flexbus->csmr4 = ((CONFIG_SYS_CS4_MASK - 1) & 0xffff0000) | 1;
+	portcfg->pcfg3 |= CONFIG_SYS_CS4_PORT3_CONFIG;
 	__asm__ volatile ("sync");
 #endif
-#if defined (CFG_CS5_BASE)
-	flexbus->csar5 = CFG_CS5_BASE;
-	flexbus->cscr5 = CFG_CS5_CTRL;
-	flexbus->csmr5 = ((CFG_CS5_MASK - 1) & 0xffff0000) | 1;
-	portcfg->pcfg3 |= CFG_CS5_PORT3_CONFIG;
+#if defined (CONFIG_SYS_CS5_BASE)
+	flexbus->csar5 = CONFIG_SYS_CS5_BASE;
+	flexbus->cscr5 = CONFIG_SYS_CS5_CTRL;
+	flexbus->csmr5 = ((CONFIG_SYS_CS5_MASK - 1) & 0xffff0000) | 1;
+	portcfg->pcfg3 |= CONFIG_SYS_CS5_PORT3_CONFIG;
 	__asm__ volatile ("sync");
 #endif
 
diff --git a/cpu/mpc8220/dramSetup.c b/cpu/mpc8220/dramSetup.c
index 08e3172f2..52cf1333f 100644
--- a/cpu/mpc8220/dramSetup.c
+++ b/cpu/mpc8220/dramSetup.c
@@ -34,9 +34,9 @@ characteristics to initialize the dram on MPC8220
 
 DECLARE_GLOBAL_DATA_PTR;
 
-#define SPD_SIZE	CFG_SDRAM_SPD_SIZE
-#define DRAM_SPD	(CFG_SDRAM_SPD_I2C_ADDR)<<1	/* on Board SPD eeprom */
-#define TOTAL_BANK	CFG_SDRAM_TOTAL_BANKS
+#define SPD_SIZE	CONFIG_SYS_SDRAM_SPD_SIZE
+#define DRAM_SPD	(CONFIG_SYS_SDRAM_SPD_I2C_ADDR)<<1	/* on Board SPD eeprom */
+#define TOTAL_BANK	CONFIG_SYS_SDRAM_TOTAL_BANKS
 
 int spd_status (volatile i2c8220_t * pi2c, u8 sta_bit, u8 truefalse)
 {
@@ -103,7 +103,7 @@ int readSpdData (u8 * spdData)
 	/* Enable Port Configuration for SDA and SDL signals */
 	pcfg = (volatile pcfg8220_t *) (MMAP_PCFG);
 	__asm__ ("sync");
-	pcfg->pcfg3 &= ~CFG_I2C_PORT3_CONFIG;
+	pcfg->pcfg3 &= ~CONFIG_SYS_I2C_PORT3_CONFIG;
 	__asm__ ("sync");
 
 	/* Points the structure to I2c mbar memory offset */
@@ -144,7 +144,7 @@ int readSpdData (u8 * spdData)
 		break;
 	}
 
-	pi2cReg->adr = CFG_I2C_SLAVE<<1;
+	pi2cReg->adr = CONFIG_SYS_I2C_SLAVE<<1;
 
 	pi2cReg->cr = I2C_CTL_EN;	/* Set Enable         */
 
@@ -541,7 +541,7 @@ u32 dramSetup (void)
 	}
 
 	/* Set up the Drive Strength register */
-	sysconf->sdramds = CFG_SDRAM_DRIVE_STRENGTH;
+	sysconf->sdramds = CONFIG_SYS_SDRAM_DRIVE_STRENGTH;
 
 	/* ********************** Cfg 1 ************************* */
 
@@ -679,7 +679,7 @@ u32 dramSetup (void)
 
 
 	/* Set up mode value for CAS latency */
-#if (CFG_SDRAM_CAS_LATENCY==5) /* CL=2.5 */
+#if (CONFIG_SYS_SDRAM_CAS_LATENCY==5) /* CL=2.5 */
 	mode_value = (MODE_MODE | MODE_BURSTLEN (MODE_BURSTLEN_8) |
 		MODE_BT_SEQUENTIAL | MODE_CL (MODE_CL_2p5) | MODE_CMD);
 #else
diff --git a/cpu/mpc8220/i2c.c b/cpu/mpc8220/i2c.c
index d67936dc3..76ecdf11e 100644
--- a/cpu/mpc8220/i2c.c
+++ b/cpu/mpc8220/i2c.c
@@ -387,20 +387,4 @@ int i2c_write (uchar chip, uint addr, int alen, uchar * buf, int len)
 	return ret;
 }
 
-uchar i2c_reg_read (uchar chip, uchar reg)
-{
-	uchar buf;
-
-	i2c_read (chip, reg, 1, &buf, 1);
-
-	return buf;
-}
-
-void i2c_reg_write (uchar chip, uchar reg, uchar val)
-{
-	i2c_write (chip, reg, 1, &val, 1);
-
-	return;
-}
-
 #endif /* CONFIG_HARD_I2C */
diff --git a/cpu/mpc8220/i2cCore.c b/cpu/mpc8220/i2cCore.c
index accf43c10..b89ad034f 100644
--- a/cpu/mpc8220/i2cCore.c
+++ b/cpu/mpc8220/i2cCore.c
@@ -440,7 +440,7 @@ STATUS i2c_write2byte (SI2C * pi2c, UINT16 * writeb)
 	return OK;
 }
 
-/* FDR table base on 33Mhz - more detail please refer to Odini2c_dividers.xls
+/* FDR table base on 33MHz - more detail please refer to Odini2c_dividers.xls
 FDR FDR scl sda scl2tap2
 510 432 tap tap tap tap scl_per	    sda_hold	I2C Freq    0	1   2	3   4	5
 000 000 9   3	4   1	28 Clocks   9 Clocks	1190 KHz    0	0   0	0   0	0
diff --git a/cpu/mpc8220/interrupts.c b/cpu/mpc8220/interrupts.c
index 036378c8b..78e99179c 100644
--- a/cpu/mpc8220/interrupts.c
+++ b/cpu/mpc8220/interrupts.c
@@ -34,7 +34,7 @@
 
 int interrupt_init_cpu (ulong * decrementer_count)
 {
-	*decrementer_count = get_tbclk () / CFG_HZ;
+	*decrementer_count = get_tbclk () / CONFIG_SYS_HZ;
 
 	return (0);
 }
diff --git a/cpu/mpc8220/pci.c b/cpu/mpc8220/pci.c
index 4ef214e54..a78a82850 100644
--- a/cpu/mpc8220/pci.c
+++ b/cpu/mpc8220/pci.c
@@ -33,8 +33,8 @@
 #if defined(CONFIG_PCI)
 
 /* System RAM mapped over PCI */
-#define CONFIG_PCI_SYS_MEM_BUS	 CFG_SDRAM_BASE
-#define CONFIG_PCI_SYS_MEM_PHYS	 CFG_SDRAM_BASE
+#define CONFIG_PCI_SYS_MEM_BUS	 CONFIG_SYS_SDRAM_BASE
+#define CONFIG_PCI_SYS_MEM_PHYS	 CONFIG_SYS_SDRAM_BASE
 #define CONFIG_PCI_SYS_MEM_SIZE	 (1024 * 1024 * 1024)
 
 #define cfg_read(val, addr, type, op)		*val = op((type)(addr));
diff --git a/cpu/mpc8220/speed.c b/cpu/mpc8220/speed.c
index 200a76271..62ac845b7 100644
--- a/cpu/mpc8220/speed.c
+++ b/cpu/mpc8220/speed.c
@@ -67,25 +67,25 @@ int get_clocks (void)
 	u32 hid1;
 	int i, size, pci2bus;
 
-#if !defined(CFG_MPC8220_CLKIN)
-#error clock measuring not implemented yet - define CFG_MPC8220_CLKIN
+#if !defined(CONFIG_SYS_MPC8220_CLKIN)
+#error clock measuring not implemented yet - define CONFIG_SYS_MPC8220_CLKIN
 #endif
 
-	gd->inp_clk = CFG_MPC8220_CLKIN;
+	gd->inp_clk = CONFIG_SYS_MPC8220_CLKIN;
 
 	/* Read XLB to PCI(INP) clock multiplier */
 	pci2bus = (*((volatile u32 *)PCI_REG_PCIGSCR) &
 		PCI_REG_PCIGSCR_PCI2XLB_CLK_MASK)>>PCI_REG_PCIGSCR_PCI2XLB_CLK_BIT;
 
 	/* XLB bus clock */
-	gd->bus_clk = CFG_MPC8220_CLKIN * pci2bus;
+	gd->bus_clk = CONFIG_SYS_MPC8220_CLKIN * pci2bus;
 
 	/* PCI clock is same as input clock */
-	gd->pci_clk = CFG_MPC8220_CLKIN;
+	gd->pci_clk = CONFIG_SYS_MPC8220_CLKIN;
 
 	/* FlexBus is temporary set as the same as input clock */
 	/* will do dynamic in the future */
-	gd->flb_clk = CFG_MPC8220_CLKIN;
+	gd->flb_clk = CONFIG_SYS_MPC8220_CLKIN;
 
 	/* CPU Clock - Read HID1 */
 	asm volatile ("mfspr %0, 1009":"=r" (hid1):);
@@ -97,7 +97,7 @@ int get_clocks (void)
 	for (i = 0; i < size; i++)
 		if (hid1 == bus2core[i].hid1) {
 			gd->cpu_clk = (bus2core[i].multi * gd->bus_clk) >> 1;
-			gd->vco_clk = CFG_MPC8220_SYSPLL_VCO_MULTIPLIER * (gd->pci_clk * bus2core[i].vco_div)/2;
+			gd->vco_clk = CONFIG_SYS_MPC8220_SYSPLL_VCO_MULTIPLIER * (gd->pci_clk * bus2core[i].vco_div)/2;
 			break;
 		}
 
@@ -109,10 +109,14 @@ int get_clocks (void)
 
 int prt_mpc8220_clks (void)
 {
-	printf ("       Bus %ld MHz, CPU %ld MHz, PCI %ld MHz, VCO %ld MHz\n",
-		gd->bus_clk / 1000000, gd->cpu_clk / 1000000,
-		gd->pci_clk / 1000000, gd->vco_clk / 1000000);
-
+	char buf1[32], buf2[32], buf3[32], buf4[32];
+
+	printf ("       Bus %s MHz, CPU %s MHz, PCI %s MHz, VCO %s MHz\n",
+		strmhz(buf1, gd->bus_clk),
+		strmhz(buf2, gd->cpu_clk),
+		strmhz(buf3, gd->pci_clk),
+		strmhz(buf4, gd->vco_clk)
+	);
 	return (0);
 }
 
diff --git a/cpu/mpc8220/start.S b/cpu/mpc8220/start.S
index b5145ca03..3abc61926 100644
--- a/cpu/mpc8220/start.S
+++ b/cpu/mpc8220/start.S
@@ -27,6 +27,7 @@
  */
 #include <config.h>
 #include <mpc8220.h>
+#include <timestamp.h>
 #include <version.h>
 
 #define _LINUX_CONFIG_H 1   /* avoid reading Linux autoconf.h file  */
@@ -77,7 +78,7 @@
 	.globl	version_string
 version_string:
 	.ascii U_BOOT_VERSION
-	.ascii " (", __DATE__, " - ", __TIME__, ")"
+	.ascii " (", U_BOOT_DATE, " - ", U_BOOT_TIME, ")"
 	.ascii CONFIG_IDENT_STRING, "\0"
 
 /*
@@ -105,16 +106,16 @@ boot_warm:
 	/* replace default MBAR base address from 0x80000000
 	    to 0xf0000000 */
 
-#if defined(CFG_DEFAULT_MBAR) && !defined(CFG_RAMBOOT)
-	lis	r3, CFG_MBAR@h
-	ori	r3, r3, CFG_MBAR@l
+#if defined(CONFIG_SYS_DEFAULT_MBAR) && !defined(CONFIG_SYS_RAMBOOT)
+	lis	r3, CONFIG_SYS_MBAR@h
+	ori	r3, r3, CONFIG_SYS_MBAR@l
 
 	/* MBAR is mirrored into the MBAR SPR */
 	mtspr	MBAR,r3
 	mtspr	SPRN_SPRG7W,r3
-	lis	r4, CFG_DEFAULT_MBAR@h
+	lis	r4, CONFIG_SYS_DEFAULT_MBAR@h
 	stw	r3, 0(r4)
-#endif /* CFG_DEFAULT_MBAR */
+#endif /* CONFIG_SYS_DEFAULT_MBAR */
 
 	/* Initialise the MPC8220 processor core			*/
 	/*--------------------------------------------------------------*/
@@ -125,9 +126,9 @@ boot_warm:
 	/*--------------------------------------------------------------*/
 
 	/* set up stack in on-chip SRAM */
-	lis	r3, CFG_INIT_RAM_ADDR@h
-	ori	r3, r3, CFG_INIT_RAM_ADDR@l
-	ori	r1, r3, CFG_INIT_SP_OFFSET
+	lis	r3, CONFIG_SYS_INIT_RAM_ADDR@h
+	ori	r3, r3, CONFIG_SYS_INIT_RAM_ADDR@l
+	ori	r1, r3, CONFIG_SYS_INIT_SP_OFFSET
 
 	li	r0, 0		/* Make room for stack frame header and */
 	stwu	r0, -4(r1)	/* clear final stack frame so that	*/
@@ -361,13 +362,13 @@ init_8220_core:
 	/* HID0 also contains cache control				*/
 	/*--------------------------------------------------------------*/
 
-	lis	r3, CFG_HID0_INIT@h
-	ori	r3, r3, CFG_HID0_INIT@l
+	lis	r3, CONFIG_SYS_HID0_INIT@h
+	ori	r3, r3, CONFIG_SYS_HID0_INIT@l
 	SYNC
 	mtspr	HID0, r3
 
-	lis	r3, CFG_HID0_FINAL@h
-	ori	r3, r3, CFG_HID0_FINAL@l
+	lis	r3, CONFIG_SYS_HID0_FINAL@h
+	ori	r3, r3, CONFIG_SYS_HID0_FINAL@l
 	SYNC
 	mtspr	HID0, r3
 
@@ -458,7 +459,7 @@ init_8220_core:
 	.globl	icache_enable
 icache_enable:
 	lis	r4, 0
-	ori	r4, r4, CFG_HID0_INIT /* set ICE & ICFI bit		*/
+	ori	r4, r4, CONFIG_SYS_HID0_INIT /* set ICE & ICFI bit		*/
 	rlwinm	r3, r4, 0, 21, 19     /* clear the ICFI bit		*/
 
 	/*
@@ -547,16 +548,16 @@ relocate_code:
 	mr	r10, r5	    /* Save copy of Destination Address */
 
 	mr	r3,  r5	    /* Destination Address		*/
-	lis	r4, CFG_MONITOR_BASE@h	/* Source Address	*/
-	ori	r4, r4, CFG_MONITOR_BASE@l
+	lis	r4, CONFIG_SYS_MONITOR_BASE@h	/* Source Address	*/
+	ori	r4, r4, CONFIG_SYS_MONITOR_BASE@l
 	lwz	r5, GOT(__init_end)
 	sub	r5, r5, r4
-	li	r6, CFG_CACHELINE_SIZE	/* Cache Line Size	*/
+	li	r6, CONFIG_SYS_CACHELINE_SIZE	/* Cache Line Size	*/
 
 	/*
 	 * Fix GOT pointer:
 	 *
-	 * New GOT-PTR = (old GOT-PTR - CFG_MONITOR_BASE) + Destination Address
+	 * New GOT-PTR = (old GOT-PTR - CONFIG_SYS_MONITOR_BASE) + Destination Address
 	 *
 	 * Offset:
 	 */
diff --git a/cpu/mpc8220/u-boot.lds b/cpu/mpc8220/u-boot.lds
index e34a9d484..2a12a698d 100644
--- a/cpu/mpc8220/u-boot.lds
+++ b/cpu/mpc8220/u-boot.lds
@@ -118,6 +118,7 @@ SECTIONS
    *(.dynbss)
    *(.bss)
    *(COMMON)
+   . = ALIGN(4);
   }
   _end = . ;
   PROVIDE (end = .);
diff --git a/cpu/mpc824x/cpu.c b/cpu/mpc824x/cpu.c
index 0a45cc841..08f6a947f 100644
--- a/cpu/mpc824x/cpu.c
+++ b/cpu/mpc824x/cpu.c
@@ -109,17 +109,17 @@ int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 	 * Trying to execute the next instruction at a non-existing address
 	 * should cause a machine check, resulting in reset
 	 */
-#ifdef CFG_RESET_ADDRESS
-	addr = CFG_RESET_ADDRESS;
+#ifdef CONFIG_SYS_RESET_ADDRESS
+	addr = CONFIG_SYS_RESET_ADDRESS;
 #else
 	/*
-	 * note: when CFG_MONITOR_BASE points to a RAM address,
-	 * CFG_MONITOR_BASE - sizeof (ulong) is usually a valid
+	 * note: when CONFIG_SYS_MONITOR_BASE points to a RAM address,
+	 * CONFIG_SYS_MONITOR_BASE - sizeof (ulong) is usually a valid
 	 * address. Better pick an address known to be invalid on
-	 * your system and assign it to CFG_RESET_ADDRESS.
+	 * your system and assign it to CONFIG_SYS_RESET_ADDRESS.
 	 * "(ulong)-1" used to be a good choice for many systems...
 	 */
-	addr = CFG_MONITOR_BASE - sizeof (ulong);
+	addr = CONFIG_SYS_MONITOR_BASE - sizeof (ulong);
 #endif
 	((void (*)(void)) addr) ();
 	return 1;
diff --git a/cpu/mpc824x/cpu_init.c b/cpu/mpc824x/cpu_init.c
index 7871031b9..395f7767d 100644
--- a/cpu/mpc824x/cpu_init.c
+++ b/cpu/mpc824x/cpu_init.c
@@ -25,32 +25,32 @@
 #include <asm/processor.h>
 #include <mpc824x.h>
 
-#ifndef CFG_BANK0_ROW
-#define CFG_BANK0_ROW 0
+#ifndef CONFIG_SYS_BANK0_ROW
+#define CONFIG_SYS_BANK0_ROW 0
 #endif
-#ifndef CFG_BANK1_ROW
-#define CFG_BANK1_ROW 0
+#ifndef CONFIG_SYS_BANK1_ROW
+#define CONFIG_SYS_BANK1_ROW 0
 #endif
-#ifndef CFG_BANK2_ROW
-#define CFG_BANK2_ROW 0
+#ifndef CONFIG_SYS_BANK2_ROW
+#define CONFIG_SYS_BANK2_ROW 0
 #endif
-#ifndef CFG_BANK3_ROW
-#define CFG_BANK3_ROW 0
+#ifndef CONFIG_SYS_BANK3_ROW
+#define CONFIG_SYS_BANK3_ROW 0
 #endif
-#ifndef CFG_BANK4_ROW
-#define CFG_BANK4_ROW 0
+#ifndef CONFIG_SYS_BANK4_ROW
+#define CONFIG_SYS_BANK4_ROW 0
 #endif
-#ifndef CFG_BANK5_ROW
-#define CFG_BANK5_ROW 0
+#ifndef CONFIG_SYS_BANK5_ROW
+#define CONFIG_SYS_BANK5_ROW 0
 #endif
-#ifndef CFG_BANK6_ROW
-#define CFG_BANK6_ROW 0
+#ifndef CONFIG_SYS_BANK6_ROW
+#define CONFIG_SYS_BANK6_ROW 0
 #endif
-#ifndef CFG_BANK7_ROW
-#define CFG_BANK7_ROW 0
+#ifndef CONFIG_SYS_BANK7_ROW
+#define CONFIG_SYS_BANK7_ROW 0
 #endif
-#ifndef CFG_DBUS_SIZE2
-#define CFG_DBUS_SIZE2 0
+#ifndef CONFIG_SYS_DBUS_SIZE2
+#define CONFIG_SYS_DBUS_SIZE2 0
 #endif
 
 /*
@@ -163,150 +163,150 @@ cpu_init_f (void)
 #endif
 	CONFIG_WRITE_WORD(PICR2, val);
 
-	CONFIG_WRITE_WORD(EUMBBAR, CFG_EUMB_ADDR);
-#ifndef CFG_RAMBOOT
-	CONFIG_WRITE_WORD(MCCR1, (CFG_ROMNAL << MCCR1_ROMNAL_SHIFT) |
-				 (CFG_BANK0_ROW) |
-				 (CFG_BANK1_ROW << MCCR1_BANK1ROW_SHIFT) |
-				 (CFG_BANK2_ROW << MCCR1_BANK2ROW_SHIFT) |
-				 (CFG_BANK3_ROW << MCCR1_BANK3ROW_SHIFT) |
-				 (CFG_BANK4_ROW << MCCR1_BANK4ROW_SHIFT) |
-				 (CFG_BANK5_ROW << MCCR1_BANK5ROW_SHIFT) |
-				 (CFG_BANK6_ROW << MCCR1_BANK6ROW_SHIFT) |
-				 (CFG_BANK7_ROW << MCCR1_BANK7ROW_SHIFT) |
-				 (CFG_ROMFAL << MCCR1_ROMFAL_SHIFT));
+	CONFIG_WRITE_WORD(EUMBBAR, CONFIG_SYS_EUMB_ADDR);
+#ifndef CONFIG_SYS_RAMBOOT
+	CONFIG_WRITE_WORD(MCCR1, (CONFIG_SYS_ROMNAL << MCCR1_ROMNAL_SHIFT) |
+				 (CONFIG_SYS_BANK0_ROW) |
+				 (CONFIG_SYS_BANK1_ROW << MCCR1_BANK1ROW_SHIFT) |
+				 (CONFIG_SYS_BANK2_ROW << MCCR1_BANK2ROW_SHIFT) |
+				 (CONFIG_SYS_BANK3_ROW << MCCR1_BANK3ROW_SHIFT) |
+				 (CONFIG_SYS_BANK4_ROW << MCCR1_BANK4ROW_SHIFT) |
+				 (CONFIG_SYS_BANK5_ROW << MCCR1_BANK5ROW_SHIFT) |
+				 (CONFIG_SYS_BANK6_ROW << MCCR1_BANK6ROW_SHIFT) |
+				 (CONFIG_SYS_BANK7_ROW << MCCR1_BANK7ROW_SHIFT) |
+				 (CONFIG_SYS_ROMFAL << MCCR1_ROMFAL_SHIFT));
 #endif
 
-#if defined(CFG_ASRISE) && defined(CFG_ASFALL)
-	CONFIG_WRITE_WORD(MCCR2, CFG_REFINT << MCCR2_REFINT_SHIFT |
-				 CFG_ASRISE << MCCR2_ASRISE_SHIFT |
-				 CFG_ASFALL << MCCR2_ASFALL_SHIFT);
+#if defined(CONFIG_SYS_ASRISE) && defined(CONFIG_SYS_ASFALL)
+	CONFIG_WRITE_WORD(MCCR2, CONFIG_SYS_REFINT << MCCR2_REFINT_SHIFT |
+				 CONFIG_SYS_ASRISE << MCCR2_ASRISE_SHIFT |
+				 CONFIG_SYS_ASFALL << MCCR2_ASFALL_SHIFT);
 #else
-	CONFIG_WRITE_WORD(MCCR2, CFG_REFINT << MCCR2_REFINT_SHIFT);
+	CONFIG_WRITE_WORD(MCCR2, CONFIG_SYS_REFINT << MCCR2_REFINT_SHIFT);
 #endif
 
 #if defined(CONFIG_MPC8240)
 	CONFIG_WRITE_WORD(MCCR3,
-		(((CFG_BSTOPRE & 0x003c) >> 2) << MCCR3_BSTOPRE2TO5_SHIFT) |
-		(CFG_REFREC << MCCR3_REFREC_SHIFT) |
-		(CFG_RDLAT  << MCCR3_RDLAT_SHIFT));
+		(((CONFIG_SYS_BSTOPRE & 0x003c) >> 2) << MCCR3_BSTOPRE2TO5_SHIFT) |
+		(CONFIG_SYS_REFREC << MCCR3_REFREC_SHIFT) |
+		(CONFIG_SYS_RDLAT  << MCCR3_RDLAT_SHIFT));
 #elif defined(CONFIG_MPC8245)
 	CONFIG_WRITE_WORD(MCCR3,
-		(((CFG_BSTOPRE & 0x003c) >> 2) << MCCR3_BSTOPRE2TO5_SHIFT) |
-		(CFG_REFREC << MCCR3_REFREC_SHIFT));
+		(((CONFIG_SYS_BSTOPRE & 0x003c) >> 2) << MCCR3_BSTOPRE2TO5_SHIFT) |
+		(CONFIG_SYS_REFREC << MCCR3_REFREC_SHIFT));
 #else
 #error Specific type of MPC824x must be defined (i.e. CONFIG_MPC8240)
 #endif
 
 /* this is gross.  We think these should all be the same, and various boards
- *  should define CFG_ACTORW to 0 if they don't want to set it, or even, if
+ *  should define CONFIG_SYS_ACTORW to 0 if they don't want to set it, or even, if
  *  its not set, we define it to zero in this file
  */
 #if defined(CONFIG_CU824) || defined(CONFIG_PN62)
 	CONFIG_WRITE_WORD(MCCR4,
-	(CFG_PRETOACT << MCCR4_PRETOACT_SHIFT) |
-	(CFG_ACTTOPRE << MCCR4_ACTTOPRE_SHIFT) |
+	(CONFIG_SYS_PRETOACT << MCCR4_PRETOACT_SHIFT) |
+	(CONFIG_SYS_ACTTOPRE << MCCR4_ACTTOPRE_SHIFT) |
 	MCCR4_BIT21 |
-	(CFG_REGISTERD_TYPE_BUFFER ? MCCR4_REGISTERED: 0) |
-	((CFG_BSTOPRE & 0x0003) <<MCCR4_BSTOPRE0TO1_SHIFT ) |
-	(((CFG_SDMODE_CAS_LAT <<4) | (CFG_SDMODE_WRAP <<3) |
-		  CFG_SDMODE_BURSTLEN) << MCCR4_SDMODE_SHIFT) |
-	(CFG_ACTORW << MCCR4_ACTTORW_SHIFT) |
-	(((CFG_BSTOPRE & 0x03c0) >> 6) << MCCR4_BSTOPRE6TO9_SHIFT));
+	(CONFIG_SYS_REGISTERD_TYPE_BUFFER ? MCCR4_REGISTERED: 0) |
+	((CONFIG_SYS_BSTOPRE & 0x0003) <<MCCR4_BSTOPRE0TO1_SHIFT ) |
+	(((CONFIG_SYS_SDMODE_CAS_LAT <<4) | (CONFIG_SYS_SDMODE_WRAP <<3) |
+		  CONFIG_SYS_SDMODE_BURSTLEN) << MCCR4_SDMODE_SHIFT) |
+	(CONFIG_SYS_ACTORW << MCCR4_ACTTORW_SHIFT) |
+	(((CONFIG_SYS_BSTOPRE & 0x03c0) >> 6) << MCCR4_BSTOPRE6TO9_SHIFT));
 #elif defined(CONFIG_MPC8240)
 	CONFIG_WRITE_WORD(MCCR4,
-	(CFG_PRETOACT << MCCR4_PRETOACT_SHIFT) |
-	(CFG_ACTTOPRE << MCCR4_ACTTOPRE_SHIFT) |
+	(CONFIG_SYS_PRETOACT << MCCR4_PRETOACT_SHIFT) |
+	(CONFIG_SYS_ACTTOPRE << MCCR4_ACTTOPRE_SHIFT) |
 	MCCR4_BIT21 |
-	(CFG_REGISTERD_TYPE_BUFFER ? MCCR4_REGISTERED: 0) |
-	((CFG_BSTOPRE & 0x0003) <<MCCR4_BSTOPRE0TO1_SHIFT ) |
-	(((CFG_SDMODE_CAS_LAT <<4) | (CFG_SDMODE_WRAP <<3) |
-		  (CFG_SDMODE_BURSTLEN)) <<MCCR4_SDMODE_SHIFT) |
-	(((CFG_BSTOPRE & 0x03c0) >> 6) <<MCCR4_BSTOPRE6TO9_SHIFT ));
+	(CONFIG_SYS_REGISTERD_TYPE_BUFFER ? MCCR4_REGISTERED: 0) |
+	((CONFIG_SYS_BSTOPRE & 0x0003) <<MCCR4_BSTOPRE0TO1_SHIFT ) |
+	(((CONFIG_SYS_SDMODE_CAS_LAT <<4) | (CONFIG_SYS_SDMODE_WRAP <<3) |
+		  (CONFIG_SYS_SDMODE_BURSTLEN)) <<MCCR4_SDMODE_SHIFT) |
+	(((CONFIG_SYS_BSTOPRE & 0x03c0) >> 6) <<MCCR4_BSTOPRE6TO9_SHIFT ));
 #elif defined(CONFIG_MPC8245)
 	CONFIG_READ_WORD(MCCR1, val);
 	val &= MCCR1_DBUS_SIZE0;    /* test for 64-bit mem bus */
 
 	CONFIG_WRITE_WORD(MCCR4,
-		(CFG_PRETOACT << MCCR4_PRETOACT_SHIFT) |
-		(CFG_ACTTOPRE << MCCR4_ACTTOPRE_SHIFT) |
-		(CFG_EXTROM ? MCCR4_EXTROM : 0) |
-		(CFG_REGDIMM ? MCCR4_REGDIMM : 0) |
-		(CFG_REGISTERD_TYPE_BUFFER ? MCCR4_REGISTERED: 0) |
-		((CFG_BSTOPRE & 0x0003) <<MCCR4_BSTOPRE0TO1_SHIFT ) |
-		(CFG_DBUS_SIZE2 << MCCR4_DBUS_SIZE2_SHIFT) |
-		(((CFG_SDMODE_CAS_LAT <<4) | (CFG_SDMODE_WRAP <<3) |
+		(CONFIG_SYS_PRETOACT << MCCR4_PRETOACT_SHIFT) |
+		(CONFIG_SYS_ACTTOPRE << MCCR4_ACTTOPRE_SHIFT) |
+		(CONFIG_SYS_EXTROM ? MCCR4_EXTROM : 0) |
+		(CONFIG_SYS_REGDIMM ? MCCR4_REGDIMM : 0) |
+		(CONFIG_SYS_REGISTERD_TYPE_BUFFER ? MCCR4_REGISTERED: 0) |
+		((CONFIG_SYS_BSTOPRE & 0x0003) <<MCCR4_BSTOPRE0TO1_SHIFT ) |
+		(CONFIG_SYS_DBUS_SIZE2 << MCCR4_DBUS_SIZE2_SHIFT) |
+		(((CONFIG_SYS_SDMODE_CAS_LAT <<4) | (CONFIG_SYS_SDMODE_WRAP <<3) |
 		      (val ? 2 : 3)) << MCCR4_SDMODE_SHIFT)  |
-		(CFG_ACTORW << MCCR4_ACTTORW_SHIFT) |
-		(((CFG_BSTOPRE & 0x03c0) >> 6) <<MCCR4_BSTOPRE6TO9_SHIFT ));
+		(CONFIG_SYS_ACTORW << MCCR4_ACTTORW_SHIFT) |
+		(((CONFIG_SYS_BSTOPRE & 0x03c0) >> 6) <<MCCR4_BSTOPRE6TO9_SHIFT ));
 #else
 #error Specific type of MPC824x must be defined (i.e. CONFIG_MPC8240)
 #endif
 
 	CONFIG_WRITE_WORD(MSAR1,
-		( (CFG_BANK0_START & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) |
-		(((CFG_BANK1_START & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 8) |
-		(((CFG_BANK2_START & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 16) |
-		(((CFG_BANK3_START & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 24));
+		( (CONFIG_SYS_BANK0_START & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) |
+		(((CONFIG_SYS_BANK1_START & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 8) |
+		(((CONFIG_SYS_BANK2_START & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 16) |
+		(((CONFIG_SYS_BANK3_START & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 24));
 	CONFIG_WRITE_WORD(EMSAR1,
-		( (CFG_BANK0_START & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) |
-		(((CFG_BANK1_START & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 8) |
-		(((CFG_BANK2_START & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 16) |
-		(((CFG_BANK3_START & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 24));
+		( (CONFIG_SYS_BANK0_START & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) |
+		(((CONFIG_SYS_BANK1_START & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 8) |
+		(((CONFIG_SYS_BANK2_START & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 16) |
+		(((CONFIG_SYS_BANK3_START & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 24));
 	CONFIG_WRITE_WORD(MSAR2,
-		( (CFG_BANK4_START & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) |
-		(((CFG_BANK5_START & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 8) |
-		(((CFG_BANK6_START & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 16) |
-		(((CFG_BANK7_START & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 24));
+		( (CONFIG_SYS_BANK4_START & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) |
+		(((CONFIG_SYS_BANK5_START & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 8) |
+		(((CONFIG_SYS_BANK6_START & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 16) |
+		(((CONFIG_SYS_BANK7_START & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 24));
 	CONFIG_WRITE_WORD(EMSAR2,
-		( (CFG_BANK4_START & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) |
-		(((CFG_BANK5_START & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 8) |
-		(((CFG_BANK6_START & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 16) |
-		(((CFG_BANK7_START & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 24));
+		( (CONFIG_SYS_BANK4_START & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) |
+		(((CONFIG_SYS_BANK5_START & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 8) |
+		(((CONFIG_SYS_BANK6_START & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 16) |
+		(((CONFIG_SYS_BANK7_START & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 24));
 	CONFIG_WRITE_WORD(MEAR1,
-		( (CFG_BANK0_END & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) |
-		(((CFG_BANK1_END & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 8) |
-		(((CFG_BANK2_END & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 16) |
-		(((CFG_BANK3_END & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 24));
+		( (CONFIG_SYS_BANK0_END & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) |
+		(((CONFIG_SYS_BANK1_END & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 8) |
+		(((CONFIG_SYS_BANK2_END & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 16) |
+		(((CONFIG_SYS_BANK3_END & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 24));
 	CONFIG_WRITE_WORD(EMEAR1,
-		( (CFG_BANK0_END & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) |
-		(((CFG_BANK1_END & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 8) |
-		(((CFG_BANK2_END & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 16) |
-		(((CFG_BANK3_END & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 24));
+		( (CONFIG_SYS_BANK0_END & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) |
+		(((CONFIG_SYS_BANK1_END & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 8) |
+		(((CONFIG_SYS_BANK2_END & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 16) |
+		(((CONFIG_SYS_BANK3_END & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 24));
 	CONFIG_WRITE_WORD(MEAR2,
-		( (CFG_BANK4_END & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) |
-		(((CFG_BANK5_END & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 8) |
-		(((CFG_BANK6_END & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 16) |
-		(((CFG_BANK7_END & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 24));
+		( (CONFIG_SYS_BANK4_END & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) |
+		(((CONFIG_SYS_BANK5_END & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 8) |
+		(((CONFIG_SYS_BANK6_END & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 16) |
+		(((CONFIG_SYS_BANK7_END & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 24));
 	CONFIG_WRITE_WORD(EMEAR2,
-		( (CFG_BANK4_END & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) |
-		(((CFG_BANK5_END & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 8) |
-		(((CFG_BANK6_END & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 16) |
-		(((CFG_BANK7_END & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 24));
-
-	CONFIG_WRITE_BYTE(ODCR, CFG_ODCR);
-#ifdef CFG_DLL_MAX_DELAY
-	CONFIG_WRITE_BYTE(MIOCR1, CFG_DLL_MAX_DELAY);	/* needed to make DLL lock */
+		( (CONFIG_SYS_BANK4_END & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) |
+		(((CONFIG_SYS_BANK5_END & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 8) |
+		(((CONFIG_SYS_BANK6_END & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 16) |
+		(((CONFIG_SYS_BANK7_END & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 24));
+
+	CONFIG_WRITE_BYTE(ODCR, CONFIG_SYS_ODCR);
+#ifdef CONFIG_SYS_DLL_MAX_DELAY
+	CONFIG_WRITE_BYTE(MIOCR1, CONFIG_SYS_DLL_MAX_DELAY);	/* needed to make DLL lock */
 #endif
-#if defined(CFG_DLL_EXTEND) && defined(CFG_PCI_HOLD_DEL)
-	CONFIG_WRITE_BYTE(PMCR2, CFG_DLL_EXTEND | CFG_PCI_HOLD_DEL);
+#if defined(CONFIG_SYS_DLL_EXTEND) && defined(CONFIG_SYS_PCI_HOLD_DEL)
+	CONFIG_WRITE_BYTE(PMCR2, CONFIG_SYS_DLL_EXTEND | CONFIG_SYS_PCI_HOLD_DEL);
 #endif
-#if defined(MIOCR2) && defined(CFG_SDRAM_DSCD)
-	CONFIG_WRITE_BYTE(MIOCR2, CFG_SDRAM_DSCD);	/* change memory input */
+#if defined(MIOCR2) && defined(CONFIG_SYS_SDRAM_DSCD)
+	CONFIG_WRITE_BYTE(MIOCR2, CONFIG_SYS_SDRAM_DSCD);	/* change memory input */
 #endif /* setup & hold time */
 
 	CONFIG_WRITE_BYTE(MBER,
-		 CFG_BANK0_ENABLE |
-		(CFG_BANK1_ENABLE << 1) |
-		(CFG_BANK2_ENABLE << 2) |
-		(CFG_BANK3_ENABLE << 3) |
-		(CFG_BANK4_ENABLE << 4) |
-		(CFG_BANK5_ENABLE << 5) |
-		(CFG_BANK6_ENABLE << 6) |
-		(CFG_BANK7_ENABLE << 7));
-
-#ifdef CFG_PGMAX
-	CONFIG_WRITE_BYTE(MPMR, CFG_PGMAX);
+		 CONFIG_SYS_BANK0_ENABLE |
+		(CONFIG_SYS_BANK1_ENABLE << 1) |
+		(CONFIG_SYS_BANK2_ENABLE << 2) |
+		(CONFIG_SYS_BANK3_ENABLE << 3) |
+		(CONFIG_SYS_BANK4_ENABLE << 4) |
+		(CONFIG_SYS_BANK5_ENABLE << 5) |
+		(CONFIG_SYS_BANK6_ENABLE << 6) |
+		(CONFIG_SYS_BANK7_ENABLE << 7));
+
+#ifdef CONFIG_SYS_PGMAX
+	CONFIG_WRITE_BYTE(MPMR, CONFIG_SYS_PGMAX);
 #endif
 
 	/* ! Wait 200us before initialize other registers */
diff --git a/cpu/mpc824x/drivers/epic/epic1.c b/cpu/mpc824x/drivers/epic/epic1.c
index f89deed53..ecbb42d0d 100644
--- a/cpu/mpc824x/drivers/epic/epic1.c
+++ b/cpu/mpc824x/drivers/epic/epic1.c
@@ -311,7 +311,7 @@ ULONG sysEUMBBARRead
     {
     ULONG temp;
 
-    temp = *(ULONG *) (CFG_EUMB_ADDR + regNum);
+    temp = *(ULONG *) (CONFIG_SYS_EUMB_ADDR + regNum);
     return ( LONGSWAP(temp));
     }
 
@@ -331,7 +331,7 @@ void sysEUMBBARWrite
     )
     {
 
-    *(ULONG *) (CFG_EUMB_ADDR + regNum) = LONGSWAP(regVal);
+    *(ULONG *) (CONFIG_SYS_EUMB_ADDR + regNum) = LONGSWAP(regVal);
     return ;
     }
 
diff --git a/cpu/mpc824x/drivers/i2c/i2c.c b/cpu/mpc824x/drivers/i2c/i2c.c
index 3add68751..637ae4c1b 100644
--- a/cpu/mpc824x/drivers/i2c/i2c.c
+++ b/cpu/mpc824x/drivers/i2c/i2c.c
@@ -31,9 +31,9 @@
 #ifdef CONFIG_HARD_I2C
 #include <i2c.h>
 
-#define TIMEOUT (CFG_HZ/4)
+#define TIMEOUT (CONFIG_SYS_HZ/4)
 
-#define I2C_Addr ((unsigned *)(CFG_EUMB_ADDR + 0x3000))
+#define I2C_Addr ((unsigned *)(CONFIG_SYS_EUMB_ADDR + 0x3000))
 
 #define I2CADR &I2C_Addr[0]
 #define I2CFDR  &I2C_Addr[1]
@@ -267,18 +267,4 @@ int i2c_probe (uchar chip)
 	return i2c_read (chip, 0, 1, (uchar *) &tmp, 1);
 }
 
-uchar i2c_reg_read (uchar i2c_addr, uchar reg)
-{
-	uchar buf[1];
-
-	i2c_read (i2c_addr, reg, 1, buf, 1);
-
-	return (buf[0]);
-}
-
-void i2c_reg_write (uchar i2c_addr, uchar reg, uchar val)
-{
-	i2c_write (i2c_addr, reg, 1, &val, 1);
-}
-
 #endif /* CONFIG_HARD_I2C */
diff --git a/cpu/mpc824x/interrupts.c b/cpu/mpc824x/interrupts.c
index 4359ecc05..139c52cd3 100644
--- a/cpu/mpc824x/interrupts.c
+++ b/cpu/mpc824x/interrupts.c
@@ -31,7 +31,7 @@
 
 int interrupt_init_cpu (unsigned *decrementer_count)
 {
-	*decrementer_count = (get_bus_freq (0) / 4) / CFG_HZ;
+	*decrementer_count = (get_bus_freq (0) / 4) / CONFIG_SYS_HZ;
 
 	/*
 	 * It's all broken at the moment and I currently don't need
@@ -57,7 +57,7 @@ void external_interrupt (struct pt_regs *regs)
 {
 	register unsigned long temp;
 
-	pci_readl (CFG_EUMB_ADDR + EPIC_PROC_INT_ACK_REG, temp);
+	pci_readl (CONFIG_SYS_EUMB_ADDR + EPIC_PROC_INT_ACK_REG, temp);
 	sync ();					/* i'm not convinced this is needed, but dink source has it */
 	temp &= 0xff;				/*get vector */
 
diff --git a/cpu/mpc824x/start.S b/cpu/mpc824x/start.S
index 784edc36a..39325cda5 100644
--- a/cpu/mpc824x/start.S
+++ b/cpu/mpc824x/start.S
@@ -39,6 +39,7 @@
  */
 #include <config.h>
 #include <mpc824x.h>
+#include <timestamp.h>
 #include <version.h>
 
 #define _LINUX_CONFIG_H 1	/* avoid reading Linux autoconf.h file	*/
@@ -90,7 +91,7 @@
 	.globl	version_string
 version_string:
 	.ascii U_BOOT_VERSION
-	.ascii " (", __DATE__, " - ", __TIME__, ")"
+	.ascii " (", U_BOOT_DATE, " - ", U_BOOT_TIME, ")"
 	.ascii CONFIG_IDENT_STRING, "\0"
 
 	. = EXC_OFF_SYS_RESET
@@ -157,8 +158,8 @@ in_flash:
 
 	/* Allocate Initial RAM in data cache.
 	 */
-	lis	r3, CFG_INIT_RAM_ADDR@h
-	ori	r3, r3, CFG_INIT_RAM_ADDR@l
+	lis	r3, CONFIG_SYS_INIT_RAM_ADDR@h
+	ori	r3, r3, CONFIG_SYS_INIT_RAM_ADDR@l
 	li	r2, 128
 	mtctr	r2
 1:
@@ -180,8 +181,8 @@ in_flash:
 	 * Thisk the stack pointer *somewhere* sensible. Doesnt
 	 * matter much where as we'll move it when we relocate
 	 */
-	lis	r1, (CFG_INIT_RAM_ADDR + CFG_GBL_DATA_OFFSET)@h
-	ori	r1, r1, (CFG_INIT_RAM_ADDR + CFG_GBL_DATA_OFFSET)@l
+	lis	r1, (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET)@h
+	ori	r1, r1, (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET)@l
 
 	li	r0, 0			/* Make room for stack frame header and	*/
 	stwu	r0, -4(r1)		/* clear final stack frame so that	*/
@@ -475,21 +476,21 @@ relocate_code:
 	mr	r10, r5		/* Save copy of Destination Address	*/
 
 	mr	r3,  r5				/* Destination Address	*/
-#ifdef CFG_RAMBOOT
-	lis	r4, CFG_SDRAM_BASE@h		/* Source      Address	*/
-	ori	r4, r4, CFG_SDRAM_BASE@l
+#ifdef CONFIG_SYS_RAMBOOT
+	lis	r4, CONFIG_SYS_SDRAM_BASE@h		/* Source      Address	*/
+	ori	r4, r4, CONFIG_SYS_SDRAM_BASE@l
 #else
-	lis	r4, CFG_MONITOR_BASE@h		/* Source      Address	*/
-	ori	r4, r4, CFG_MONITOR_BASE@l
+	lis	r4, CONFIG_SYS_MONITOR_BASE@h		/* Source      Address	*/
+	ori	r4, r4, CONFIG_SYS_MONITOR_BASE@l
 #endif
 	lwz	r5, GOT(__init_end)
 	sub	r5, r5, r4
-	li	r6, CFG_CACHELINE_SIZE		/* Cache Line Size	*/
+	li	r6, CONFIG_SYS_CACHELINE_SIZE		/* Cache Line Size	*/
 
 	/*
 	 * Fix GOT pointer:
 	 *
-	 * New GOT-PTR = (old GOT-PTR - CFG_MONITOR_BASE) + Destination Address
+	 * New GOT-PTR = (old GOT-PTR - CONFIG_SYS_MONITOR_BASE) + Destination Address
 	 *
 	 * Offset:
 	 */
@@ -531,8 +532,8 @@ relocate_code:
 /* Unlock the data cache and invalidate locked area */
 	xor	r0, r0, r0
 	mtspr	1011, r0
-	lis	r4, CFG_INIT_RAM_ADDR@h
-	ori	r4, r4, CFG_INIT_RAM_ADDR@l
+	lis	r4, CONFIG_SYS_INIT_RAM_ADDR@h
+	ori	r4, r4, CONFIG_SYS_INIT_RAM_ADDR@l
 	li	r0, 128
 	mtctr	r0
 41:
@@ -709,66 +710,66 @@ trap_reloc:
 	/* Setup the BAT registers.
 	 */
 setup_bats:
-	lis	r4, CFG_IBAT0L@h
-	ori	r4, r4, CFG_IBAT0L@l
-	lis	r3, CFG_IBAT0U@h
-	ori	r3, r3, CFG_IBAT0U@l
+	lis	r4, CONFIG_SYS_IBAT0L@h
+	ori	r4, r4, CONFIG_SYS_IBAT0L@l
+	lis	r3, CONFIG_SYS_IBAT0U@h
+	ori	r3, r3, CONFIG_SYS_IBAT0U@l
 	mtspr	IBAT0L, r4
 	mtspr	IBAT0U, r3
 	isync
 
-	lis	r4, CFG_DBAT0L@h
-	ori	r4, r4, CFG_DBAT0L@l
-	lis	r3, CFG_DBAT0U@h
-	ori	r3, r3, CFG_DBAT0U@l
+	lis	r4, CONFIG_SYS_DBAT0L@h
+	ori	r4, r4, CONFIG_SYS_DBAT0L@l
+	lis	r3, CONFIG_SYS_DBAT0U@h
+	ori	r3, r3, CONFIG_SYS_DBAT0U@l
 	mtspr	DBAT0L, r4
 	mtspr	DBAT0U, r3
 	isync
 
-	lis	r4, CFG_IBAT1L@h
-	ori	r4, r4, CFG_IBAT1L@l
-	lis	r3, CFG_IBAT1U@h
-	ori	r3, r3, CFG_IBAT1U@l
+	lis	r4, CONFIG_SYS_IBAT1L@h
+	ori	r4, r4, CONFIG_SYS_IBAT1L@l
+	lis	r3, CONFIG_SYS_IBAT1U@h
+	ori	r3, r3, CONFIG_SYS_IBAT1U@l
 	mtspr	IBAT1L, r4
 	mtspr	IBAT1U, r3
 	isync
 
-	lis	r4, CFG_DBAT1L@h
-	ori	r4, r4, CFG_DBAT1L@l
-	lis	r3, CFG_DBAT1U@h
-	ori	r3, r3, CFG_DBAT1U@l
+	lis	r4, CONFIG_SYS_DBAT1L@h
+	ori	r4, r4, CONFIG_SYS_DBAT1L@l
+	lis	r3, CONFIG_SYS_DBAT1U@h
+	ori	r3, r3, CONFIG_SYS_DBAT1U@l
 	mtspr	DBAT1L, r4
 	mtspr	DBAT1U, r3
 	isync
 
-	lis	r4, CFG_IBAT2L@h
-	ori	r4, r4, CFG_IBAT2L@l
-	lis	r3, CFG_IBAT2U@h
-	ori	r3, r3, CFG_IBAT2U@l
+	lis	r4, CONFIG_SYS_IBAT2L@h
+	ori	r4, r4, CONFIG_SYS_IBAT2L@l
+	lis	r3, CONFIG_SYS_IBAT2U@h
+	ori	r3, r3, CONFIG_SYS_IBAT2U@l
 	mtspr	IBAT2L, r4
 	mtspr	IBAT2U, r3
 	isync
 
-	lis	r4, CFG_DBAT2L@h
-	ori	r4, r4, CFG_DBAT2L@l
-	lis	r3, CFG_DBAT2U@h
-	ori	r3, r3, CFG_DBAT2U@l
+	lis	r4, CONFIG_SYS_DBAT2L@h
+	ori	r4, r4, CONFIG_SYS_DBAT2L@l
+	lis	r3, CONFIG_SYS_DBAT2U@h
+	ori	r3, r3, CONFIG_SYS_DBAT2U@l
 	mtspr	DBAT2L, r4
 	mtspr	DBAT2U, r3
 	isync
 
-	lis	r4, CFG_IBAT3L@h
-	ori	r4, r4, CFG_IBAT3L@l
-	lis	r3, CFG_IBAT3U@h
-	ori	r3, r3, CFG_IBAT3U@l
+	lis	r4, CONFIG_SYS_IBAT3L@h
+	ori	r4, r4, CONFIG_SYS_IBAT3L@l
+	lis	r3, CONFIG_SYS_IBAT3U@h
+	ori	r3, r3, CONFIG_SYS_IBAT3U@l
 	mtspr	IBAT3L, r4
 	mtspr	IBAT3U, r3
 	isync
 
-	lis	r4, CFG_DBAT3L@h
-	ori	r4, r4, CFG_DBAT3L@l
-	lis	r3, CFG_DBAT3U@h
-	ori	r3, r3, CFG_DBAT3U@l
+	lis	r4, CONFIG_SYS_DBAT3L@h
+	ori	r4, r4, CONFIG_SYS_DBAT3L@l
+	lis	r3, CONFIG_SYS_DBAT3U@h
+	ori	r3, r3, CONFIG_SYS_DBAT3U@l
 	mtspr	DBAT3L, r4
 	mtspr	DBAT3U, r3
 	isync
diff --git a/cpu/mpc824x/u-boot.lds b/cpu/mpc824x/u-boot.lds
index aa3050dbd..8c7e1356d 100644
--- a/cpu/mpc824x/u-boot.lds
+++ b/cpu/mpc824x/u-boot.lds
@@ -118,6 +118,7 @@ SECTIONS
    *(.dynbss)
    *(.bss)
    *(COMMON)
+   . = ALIGN(4);
   }
   _end = . ;
   PROVIDE (end = .);
diff --git a/cpu/mpc8260/commproc.c b/cpu/mpc8260/commproc.c
index 8777e7736..94f6bc224 100644
--- a/cpu/mpc8260/commproc.c
+++ b/cpu/mpc8260/commproc.c
@@ -25,7 +25,7 @@ DECLARE_GLOBAL_DATA_PTR;
 void
 m8260_cpm_reset(void)
 {
-	volatile immap_t *immr = (immap_t *)CFG_IMMR;
+	volatile immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
 	volatile ulong count;
 
 	/* Reclaim the DP memory for our use.
@@ -54,7 +54,7 @@ m8260_cpm_reset(void)
 uint
 m8260_cpm_dpalloc(uint size, uint align)
 {
-	volatile immap_t *immr = (immap_t *)CFG_IMMR;
+	volatile immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
 	uint	retloc;
 	uint	align_mask, off;
 	uint	savebase;
@@ -110,7 +110,7 @@ m8260_cpm_hostalloc(uint size, uint align)
 void
 m8260_cpm_setbrg(uint brg, uint rate)
 {
-	volatile immap_t *immr = (immap_t *)CFG_IMMR;
+	volatile immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
 	volatile uint	*bp;
 	uint cd = BRG_UART_CLK / rate;
 
@@ -133,7 +133,7 @@ m8260_cpm_setbrg(uint brg, uint rate)
 void
 m8260_cpm_fastbrg(uint brg, uint rate, int div16)
 {
-	volatile immap_t *immr = (immap_t *)CFG_IMMR;
+	volatile immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
 	volatile uint	*bp;
 
 	/* This is good enough to get SMCs running.....
@@ -158,7 +158,7 @@ m8260_cpm_fastbrg(uint brg, uint rate, int div16)
 void
 m8260_cpm_extcbrg(uint brg, uint rate, uint extclk, int pinsel)
 {
-	volatile immap_t *immr = (immap_t *)CFG_IMMR;
+	volatile immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
 	volatile uint	*bp;
 
 	if (brg < 4) {
@@ -181,7 +181,7 @@ m8260_cpm_extcbrg(uint brg, uint rate, uint extclk, int pinsel)
 void post_word_store (ulong a)
 {
 	volatile ulong *save_addr =
-		(volatile ulong *)(CFG_IMMR + CPM_POST_WORD_ADDR);
+		(volatile ulong *)(CONFIG_SYS_IMMR + CPM_POST_WORD_ADDR);
 
 	*save_addr = a;
 }
@@ -189,7 +189,7 @@ void post_word_store (ulong a)
 ulong post_word_load (void)
 {
 	volatile ulong *save_addr =
-		(volatile ulong *)(CFG_IMMR + CPM_POST_WORD_ADDR);
+		(volatile ulong *)(CONFIG_SYS_IMMR + CPM_POST_WORD_ADDR);
 
 	return *save_addr;
 }
@@ -201,7 +201,7 @@ ulong post_word_load (void)
 void bootcount_store (ulong a)
 {
 	volatile ulong *save_addr =
-		(volatile ulong *)(CFG_IMMR + CPM_BOOTCOUNT_ADDR);
+		(volatile ulong *)(CONFIG_SYS_IMMR + CPM_BOOTCOUNT_ADDR);
 
 	save_addr[0] = a;
 	save_addr[1] = BOOTCOUNT_MAGIC;
@@ -210,7 +210,7 @@ void bootcount_store (ulong a)
 ulong bootcount_load (void)
 {
 	volatile ulong *save_addr =
-		(volatile ulong *)(CFG_IMMR + CPM_BOOTCOUNT_ADDR);
+		(volatile ulong *)(CONFIG_SYS_IMMR + CPM_BOOTCOUNT_ADDR);
 
 	if (save_addr[1] != BOOTCOUNT_MAGIC)
 		return 0;
diff --git a/cpu/mpc8260/cpu.c b/cpu/mpc8260/cpu.c
index efb8ed6f4..b9e748ab8 100644
--- a/cpu/mpc8260/cpu.c
+++ b/cpu/mpc8260/cpu.c
@@ -44,6 +44,7 @@
 #include <watchdog.h>
 #include <command.h>
 #include <mpc8260.h>
+#include <netdev.h>
 #include <asm/processor.h>
 #include <asm/cpm_8260.h>
 
@@ -61,7 +62,7 @@ extern int get_cpu_str_f (char *buf);
 
 int checkcpu (void)
 {
-	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
 	ulong clock = gd->cpu_clk;
 	uint pvr = get_pvr ();
 	uint immr, rev, m, k;
@@ -88,7 +89,7 @@ int checkcpu (void)
 	rev = pvr & 0xff;
 
 	immr = immap->im_memctl.memc_immr;
-	if ((immr & IMMR_ISB_MSK) != CFG_IMMR)
+	if ((immr & IMMR_ISB_MSK) != CONFIG_SYS_IMMR)
 		return -1;	/* whoops! someone moved the IMMR */
 
 #if defined(CONFIG_GET_CPU_STR_F)
@@ -178,7 +179,7 @@ int checkcpu (void)
 
 void upmconfig (uint upm, uint * table, uint size)
 {
-	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
 	volatile memctl8260_t *memctl = &immap->im_memctl;
 	volatile uchar *dummy = (uchar *) BRx_BA_MSK;	/* set all BA bits */
 	uint i;
@@ -241,7 +242,7 @@ do_reset (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
 {
 	ulong msr, addr;
 
-	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
 
 	immap->im_clkrst.car_rmr = RMR_CSRE;	/* Checkstop Reset enable */
 
@@ -255,15 +256,15 @@ do_reset (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
 	 * Trying to execute the next instruction at a non-existing address
 	 * should cause a machine check, resulting in reset
 	 */
-#ifdef CFG_RESET_ADDRESS
-	addr = CFG_RESET_ADDRESS;
+#ifdef CONFIG_SYS_RESET_ADDRESS
+	addr = CONFIG_SYS_RESET_ADDRESS;
 #else
 	/*
-	 * note: when CFG_MONITOR_BASE points to a RAM address, CFG_MONITOR_BASE
+	 * note: when CONFIG_SYS_MONITOR_BASE points to a RAM address, CONFIG_SYS_MONITOR_BASE
 	 * - sizeof (ulong) is usually a valid address. Better pick an address
-	 * known to be invalid on your system and assign it to CFG_RESET_ADDRESS.
+	 * known to be invalid on your system and assign it to CONFIG_SYS_RESET_ADDRESS.
 	 */
-	addr = CFG_MONITOR_BASE - sizeof (ulong);
+	addr = CONFIG_SYS_MONITOR_BASE - sizeof (ulong);
 #endif
 	((void (*)(void)) addr) ();
 	return 1;
@@ -293,7 +294,7 @@ void watchdog_reset (void)
 {
 	int re_enable = disable_interrupts ();
 
-	reset_8260_watchdog ((immap_t *) CFG_IMMR);
+	reset_8260_watchdog ((immap_t *) CONFIG_SYS_IMMR);
 	if (re_enable)
 		enable_interrupts ();
 }
@@ -315,3 +316,15 @@ void ft_cpu_setup (void *blob, bd_t *bd)
 	do_fixup_by_path_u32(blob, cpu_path, "clock-frequency", bd->bi_intfreq, 1);
 }
 #endif /* CONFIG_OF_LIBFDT */
+
+/*
+ * Initializes on-chip ethernet controllers.
+ * to override, implement board_eth_init()
+ */
+int cpu_eth_init(bd_t *bis)
+{
+#if defined(CONFIG_ETHER_ON_FCC)
+	fec_initialize(bis);
+#endif
+	return 0;
+}
diff --git a/cpu/mpc8260/cpu_init.c b/cpu/mpc8260/cpu_init.c
index 36fc1eba5..1d5277344 100644
--- a/cpu/mpc8260/cpu_init.c
+++ b/cpu/mpc8260/cpu_init.c
@@ -114,7 +114,7 @@ void cpu_init_f (volatile immap_t * immr)
 	extern void m8260_cpm_reset (void);
 
 	/* Pointer is writable since we allocated a register for it */
-	gd = (gd_t *) (CFG_INIT_RAM_ADDR + CFG_GBL_DATA_OFFSET);
+	gd = (gd_t *) (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET);
 
 	/* Clear initial global data */
 	memset ((void *) gd, 0, sizeof (gd_t));
@@ -124,45 +124,45 @@ void cpu_init_f (volatile immap_t * immr)
 	immr->im_clkrst.car_rsr = RSR_ALLBITS;
 
 	/* RMR - Reset Mode Register - contains checkstop reset enable (5-5) */
-	immr->im_clkrst.car_rmr = CFG_RMR;
+	immr->im_clkrst.car_rmr = CONFIG_SYS_RMR;
 
 	/* BCR - Bus Configuration Register (4-25) */
-#if defined(CFG_BCR_60x) && (CFG_BCR_SINGLE)
+#if defined(CONFIG_SYS_BCR_60x) && (CONFIG_SYS_BCR_SINGLE)
 	if (immr->im_siu_conf.sc_bcr & BCR_EBM) {
-		immr->im_siu_conf.sc_bcr = SET_VAL_MASK(immr->im_siu_conf.sc_bcr, CFG_BCR_60x, 0x80000010);
+		immr->im_siu_conf.sc_bcr = SET_VAL_MASK(immr->im_siu_conf.sc_bcr, CONFIG_SYS_BCR_60x, 0x80000010);
 	} else {
-		immr->im_siu_conf.sc_bcr = SET_VAL_MASK(immr->im_siu_conf.sc_bcr, CFG_BCR_SINGLE, 0x80000010);
+		immr->im_siu_conf.sc_bcr = SET_VAL_MASK(immr->im_siu_conf.sc_bcr, CONFIG_SYS_BCR_SINGLE, 0x80000010);
 	}
 #else
-	immr->im_siu_conf.sc_bcr = CFG_BCR;
+	immr->im_siu_conf.sc_bcr = CONFIG_SYS_BCR;
 #endif
 
 	/* SIUMCR - contains debug pin configuration (4-31) */
-#if defined(CFG_SIUMCR_LOW) && (CFG_SIUMCR_HIGH)
+#if defined(CONFIG_SYS_SIUMCR_LOW) && (CONFIG_SYS_SIUMCR_HIGH)
 	cpu_clk = board_get_cpu_clk_f ();
 	if (cpu_clk >= 100000000) {
-		immr->im_siu_conf.sc_siumcr = SET_VAL_MASK(immr->im_siu_conf.sc_siumcr, CFG_SIUMCR_HIGH, 0x9f3cc000);
+		immr->im_siu_conf.sc_siumcr = SET_VAL_MASK(immr->im_siu_conf.sc_siumcr, CONFIG_SYS_SIUMCR_HIGH, 0x9f3cc000);
 	} else {
-		immr->im_siu_conf.sc_siumcr = SET_VAL_MASK(immr->im_siu_conf.sc_siumcr, CFG_SIUMCR_LOW, 0x9f3cc000);
+		immr->im_siu_conf.sc_siumcr = SET_VAL_MASK(immr->im_siu_conf.sc_siumcr, CONFIG_SYS_SIUMCR_LOW, 0x9f3cc000);
 	}
 #else
-	immr->im_siu_conf.sc_siumcr = CFG_SIUMCR;
+	immr->im_siu_conf.sc_siumcr = CONFIG_SYS_SIUMCR;
 #endif
 
 	config_8260_ioports (immr);
 
 	/* initialize time counter status and control register (4-40) */
-	immr->im_sit.sit_tmcntsc = CFG_TMCNTSC;
+	immr->im_sit.sit_tmcntsc = CONFIG_SYS_TMCNTSC;
 
 	/* initialize the PIT (4-42) */
-	immr->im_sit.sit_piscr = CFG_PISCR;
+	immr->im_sit.sit_piscr = CONFIG_SYS_PISCR;
 
 #if !defined(CONFIG_COGENT)		/* done in start.S for the cogent */
 	/* System clock control register (9-8) */
 	sccr = immr->im_clkrst.car_sccr &
 		(SCCR_PCI_MODE | SCCR_PCI_MODCK | SCCR_PCIDF_MSK);
 	immr->im_clkrst.car_sccr = sccr |
-		(CFG_SCCR & ~(SCCR_PCI_MODE | SCCR_PCI_MODCK | SCCR_PCIDF_MSK) );
+		(CONFIG_SYS_SCCR & ~(SCCR_PCI_MODE | SCCR_PCI_MODCK | SCCR_PCIDF_MSK) );
 #endif /* !CONFIG_COGENT */
 
 	/*
@@ -174,71 +174,71 @@ void cpu_init_f (volatile immap_t * immr)
 	 * has been determined
 	 */
 
-#if defined(CFG_OR0_REMAP)
-	memctl->memc_or0 = CFG_OR0_REMAP;
+#if defined(CONFIG_SYS_OR0_REMAP)
+	memctl->memc_or0 = CONFIG_SYS_OR0_REMAP;
 #endif
-#if defined(CFG_OR1_REMAP)
-	memctl->memc_or1 = CFG_OR1_REMAP;
+#if defined(CONFIG_SYS_OR1_REMAP)
+	memctl->memc_or1 = CONFIG_SYS_OR1_REMAP;
 #endif
 
 	/* now restrict to preliminary range */
 	/* the PS came from the HRCW, don´t change it */
-	memctl->memc_br0 = SET_VAL_MASK(memctl->memc_br0 , CFG_BR0_PRELIM, BRx_PS_MSK);
-	memctl->memc_or0 = CFG_OR0_PRELIM;
+	memctl->memc_br0 = SET_VAL_MASK(memctl->memc_br0 , CONFIG_SYS_BR0_PRELIM, BRx_PS_MSK);
+	memctl->memc_or0 = CONFIG_SYS_OR0_PRELIM;
 
-#if defined(CFG_BR1_PRELIM) && defined(CFG_OR1_PRELIM)
-	memctl->memc_or1 = CFG_OR1_PRELIM;
-	memctl->memc_br1 = CFG_BR1_PRELIM;
+#if defined(CONFIG_SYS_BR1_PRELIM) && defined(CONFIG_SYS_OR1_PRELIM)
+	memctl->memc_or1 = CONFIG_SYS_OR1_PRELIM;
+	memctl->memc_br1 = CONFIG_SYS_BR1_PRELIM;
 #endif
 
-#if defined(CFG_BR2_PRELIM) && defined(CFG_OR2_PRELIM)
-	memctl->memc_or2 = CFG_OR2_PRELIM;
-	memctl->memc_br2 = CFG_BR2_PRELIM;
+#if defined(CONFIG_SYS_BR2_PRELIM) && defined(CONFIG_SYS_OR2_PRELIM)
+	memctl->memc_or2 = CONFIG_SYS_OR2_PRELIM;
+	memctl->memc_br2 = CONFIG_SYS_BR2_PRELIM;
 #endif
 
-#if defined(CFG_BR3_PRELIM) && defined(CFG_OR3_PRELIM)
-	memctl->memc_or3 = CFG_OR3_PRELIM;
-	memctl->memc_br3 = CFG_BR3_PRELIM;
+#if defined(CONFIG_SYS_BR3_PRELIM) && defined(CONFIG_SYS_OR3_PRELIM)
+	memctl->memc_or3 = CONFIG_SYS_OR3_PRELIM;
+	memctl->memc_br3 = CONFIG_SYS_BR3_PRELIM;
 #endif
 
-#if defined(CFG_BR4_PRELIM) && defined(CFG_OR4_PRELIM)
-	memctl->memc_or4 = CFG_OR4_PRELIM;
-	memctl->memc_br4 = CFG_BR4_PRELIM;
+#if defined(CONFIG_SYS_BR4_PRELIM) && defined(CONFIG_SYS_OR4_PRELIM)
+	memctl->memc_or4 = CONFIG_SYS_OR4_PRELIM;
+	memctl->memc_br4 = CONFIG_SYS_BR4_PRELIM;
 #endif
 
-#if defined(CFG_BR5_PRELIM) && defined(CFG_OR5_PRELIM)
-	memctl->memc_or5 = CFG_OR5_PRELIM;
-	memctl->memc_br5 = CFG_BR5_PRELIM;
+#if defined(CONFIG_SYS_BR5_PRELIM) && defined(CONFIG_SYS_OR5_PRELIM)
+	memctl->memc_or5 = CONFIG_SYS_OR5_PRELIM;
+	memctl->memc_br5 = CONFIG_SYS_BR5_PRELIM;
 #endif
 
-#if defined(CFG_BR6_PRELIM) && defined(CFG_OR6_PRELIM)
-	memctl->memc_or6 = CFG_OR6_PRELIM;
-	memctl->memc_br6 = CFG_BR6_PRELIM;
+#if defined(CONFIG_SYS_BR6_PRELIM) && defined(CONFIG_SYS_OR6_PRELIM)
+	memctl->memc_or6 = CONFIG_SYS_OR6_PRELIM;
+	memctl->memc_br6 = CONFIG_SYS_BR6_PRELIM;
 #endif
 
-#if defined(CFG_BR7_PRELIM) && defined(CFG_OR7_PRELIM)
-	memctl->memc_or7 = CFG_OR7_PRELIM;
-	memctl->memc_br7 = CFG_BR7_PRELIM;
+#if defined(CONFIG_SYS_BR7_PRELIM) && defined(CONFIG_SYS_OR7_PRELIM)
+	memctl->memc_or7 = CONFIG_SYS_OR7_PRELIM;
+	memctl->memc_br7 = CONFIG_SYS_BR7_PRELIM;
 #endif
 
-#if defined(CFG_BR8_PRELIM) && defined(CFG_OR8_PRELIM)
-	memctl->memc_or8 = CFG_OR8_PRELIM;
-	memctl->memc_br8 = CFG_BR8_PRELIM;
+#if defined(CONFIG_SYS_BR8_PRELIM) && defined(CONFIG_SYS_OR8_PRELIM)
+	memctl->memc_or8 = CONFIG_SYS_OR8_PRELIM;
+	memctl->memc_br8 = CONFIG_SYS_BR8_PRELIM;
 #endif
 
-#if defined(CFG_BR9_PRELIM) && defined(CFG_OR9_PRELIM)
-	memctl->memc_or9 = CFG_OR9_PRELIM;
-	memctl->memc_br9 = CFG_BR9_PRELIM;
+#if defined(CONFIG_SYS_BR9_PRELIM) && defined(CONFIG_SYS_OR9_PRELIM)
+	memctl->memc_or9 = CONFIG_SYS_OR9_PRELIM;
+	memctl->memc_br9 = CONFIG_SYS_BR9_PRELIM;
 #endif
 
-#if defined(CFG_BR10_PRELIM) && defined(CFG_OR10_PRELIM)
-	memctl->memc_or10 = CFG_OR10_PRELIM;
-	memctl->memc_br10 = CFG_BR10_PRELIM;
+#if defined(CONFIG_SYS_BR10_PRELIM) && defined(CONFIG_SYS_OR10_PRELIM)
+	memctl->memc_or10 = CONFIG_SYS_OR10_PRELIM;
+	memctl->memc_br10 = CONFIG_SYS_BR10_PRELIM;
 #endif
 
-#if defined(CFG_BR11_PRELIM) && defined(CFG_OR11_PRELIM)
-	memctl->memc_or11 = CFG_OR11_PRELIM;
-	memctl->memc_br11 = CFG_BR11_PRELIM;
+#if defined(CONFIG_SYS_BR11_PRELIM) && defined(CONFIG_SYS_OR11_PRELIM)
+	memctl->memc_or11 = CONFIG_SYS_OR11_PRELIM;
+	memctl->memc_br11 = CONFIG_SYS_BR11_PRELIM;
 #endif
 
 	m8260_cpm_reset ();
@@ -251,7 +251,7 @@ int cpu_init_r (void)
 {
 	volatile immap_t *immr = (immap_t *) gd->bd->bi_immr_base;
 
-	immr->im_cpm.cp_rccr = CFG_RCCR;
+	immr->im_cpm.cp_rccr = CONFIG_SYS_RCCR;
 
 	return (0);
 }
diff --git a/cpu/mpc8260/ether_fcc.c b/cpu/mpc8260/ether_fcc.c
index 37bf4456e..3ab57eb5b 100644
--- a/cpu/mpc8260/ether_fcc.c
+++ b/cpu/mpc8260/ether_fcc.c
@@ -73,8 +73,8 @@ static struct ether_fcc_info_s
 	PROFF_FCC1,
 	CPM_CR_FCC1_SBLOCK,
 	CPM_CR_FCC1_PAGE,
-	CFG_CMXFCR_MASK1,
-	CFG_CMXFCR_VALUE1
+	CONFIG_SYS_CMXFCR_MASK1,
+	CONFIG_SYS_CMXFCR_VALUE1
 },
 #endif
 
@@ -84,8 +84,8 @@ static struct ether_fcc_info_s
 	PROFF_FCC2,
 	CPM_CR_FCC2_SBLOCK,
 	CPM_CR_FCC2_PAGE,
-	CFG_CMXFCR_MASK2,
-	CFG_CMXFCR_VALUE2
+	CONFIG_SYS_CMXFCR_MASK2,
+	CONFIG_SYS_CMXFCR_VALUE2
 },
 #endif
 
@@ -95,8 +95,8 @@ static struct ether_fcc_info_s
 	PROFF_FCC3,
 	CPM_CR_FCC3_SBLOCK,
 	CPM_CR_FCC3_PAGE,
-	CFG_CMXFCR_MASK3,
-	CFG_CMXFCR_VALUE3
+	CONFIG_SYS_CMXFCR_MASK3,
+	CONFIG_SYS_CMXFCR_VALUE3
 },
 #endif
 };
@@ -225,7 +225,7 @@ static int fec_init(struct eth_device* dev, bd_t *bis)
 {
     struct ether_fcc_info_s * info = dev->priv;
     int i;
-    volatile immap_t *immr = (immap_t *)CFG_IMMR;
+    volatile immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
     volatile cpm8260_t *cp = &(immr->im_cpm);
     fcc_enet_t *pram_ptr;
     unsigned long mem_addr;
@@ -246,7 +246,7 @@ static int fec_init(struct eth_device* dev, bd_t *bis)
       FCC_GFMR_MODE_ENET | FCC_GFMR_TCRC_32;
 
     /* 28.9 - (5): FPSMR: enable full duplex, select CCITT CRC for Ethernet */
-    immr->im_fcc[info->ether_index].fcc_fpsmr = CFG_FCC_PSMR | FCC_PSMR_ENCRC;
+    immr->im_fcc[info->ether_index].fcc_fpsmr = CONFIG_SYS_FCC_PSMR | FCC_PSMR_ENCRC;
 
     /* 28.9 - (6): FDSR: Ethernet Syn */
     immr->im_fcc[info->ether_index].fcc_fdsr = 0xD555;
@@ -296,10 +296,10 @@ static int fec_init(struct eth_device* dev, bd_t *bis)
      */
     pram_ptr->fen_genfcc.fcc_mrblr = PKT_MAXBLR_SIZE;
     pram_ptr->fen_genfcc.fcc_rstate = (CPMFCR_GBL | CPMFCR_EB |
-				       CFG_CPMFCR_RAMTYPE) << 24;
+				       CONFIG_SYS_CPMFCR_RAMTYPE) << 24;
     pram_ptr->fen_genfcc.fcc_rbase = (unsigned int)(&rtx.rxbd[rxIdx]);
     pram_ptr->fen_genfcc.fcc_tstate = (CPMFCR_GBL | CPMFCR_EB |
-				       CFG_CPMFCR_RAMTYPE) << 24;
+				       CONFIG_SYS_CPMFCR_RAMTYPE) << 24;
     pram_ptr->fen_genfcc.fcc_tbase = (unsigned int)(&rtx.txbd[txIdx]);
 
     /* protocol-specific area */
@@ -366,7 +366,7 @@ static int fec_init(struct eth_device* dev, bd_t *bis)
 static void fec_halt(struct eth_device* dev)
 {
     struct ether_fcc_info_s * info = dev->priv;
-    volatile immap_t *immr = (immap_t *)CFG_IMMR;
+    volatile immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
 
     /* write GFMR: disable tx/rx */
     immr->im_fcc[info->ether_index].fcc_gfmr &=
@@ -646,7 +646,7 @@ swap16 (unsigned short x)
 void
 eth_loopback_test (void)
 {
-	volatile immap_t *immr = (immap_t *)CFG_IMMR;
+	volatile immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
 	volatile cpm8260_t *cp = &(immr->im_cpm);
 	int c, nclosed;
 	ulong runtime, nmsec;
diff --git a/cpu/mpc8260/ether_scc.c b/cpu/mpc8260/ether_scc.c
index 633d05391..c65f0e068 100644
--- a/cpu/mpc8260/ether_scc.c
+++ b/cpu/mpc8260/ether_scc.c
@@ -77,8 +77,8 @@
 
 #define TX_BUF_CNT 2
 
-#if !defined(CFG_SCC_TOUT_LOOP)
-  #define CFG_SCC_TOUT_LOOP 1000000
+#if !defined(CONFIG_SYS_SCC_TOUT_LOOP)
+  #define CONFIG_SYS_SCC_TOUT_LOOP 1000000
 #endif
 
 static char txbuf[TX_BUF_CNT][ DBUF_LENGTH ];
@@ -111,7 +111,7 @@ int eth_send(volatile void *packet, int length)
     }
 
     for(i=0; rtx->txbd[txIdx].cbd_sc & BD_ENET_TX_READY; i++) {
-	if (i >= CFG_SCC_TOUT_LOOP) {
+	if (i >= CONFIG_SYS_SCC_TOUT_LOOP) {
 	    puts ("scc: tx buffer not ready\n");
 	    goto out;
 	}
@@ -123,7 +123,7 @@ int eth_send(volatile void *packet, int length)
 				BD_ENET_TX_WRAP);
 
     for(i=0; rtx->txbd[txIdx].cbd_sc & BD_ENET_TX_READY; i++) {
-	if (i >= CFG_SCC_TOUT_LOOP) {
+	if (i >= CONFIG_SYS_SCC_TOUT_LOOP) {
 	    puts ("scc: tx error\n");
 	    goto out;
 	}
@@ -187,7 +187,7 @@ int eth_rx(void)
 int eth_init(bd_t *bis)
 {
     int i;
-    volatile immap_t *immr = (immap_t *)CFG_IMMR;
+    volatile immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
     scc_enet_t *pram_ptr;
     uint dpaddr;
 
@@ -203,7 +203,7 @@ int eth_init(bd_t *bis)
     /* 24.21 - (4,5): connect SCC's tx and rx clocks, use NMSI for SCC */
     immr->im_cpmux.cmx_uar = 0;
     immr->im_cpmux.cmx_scr = ( (immr->im_cpmux.cmx_scr & ~CMXSCR_MASK) |
-			       CFG_CMXSCR_VALUE);
+			       CONFIG_SYS_CMXSCR_VALUE);
 
 
     /* 24.21 (6) write RBASE and TBASE to parameter RAM */
@@ -340,7 +340,7 @@ int eth_init(bd_t *bis)
 
 void eth_halt(void)
 {
-    volatile immap_t *immr = (immap_t *)CFG_IMMR;
+    volatile immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
     immr->im_scc[CONFIG_ETHER_INDEX-1].scc_gsmrl &= ~(SCC_GSMRL_ENR |
 						      SCC_GSMRL_ENT);
 }
@@ -348,7 +348,7 @@ void eth_halt(void)
 #if 0
 void restart(void)
 {
-    volatile immap_t *immr = (immap_t *)CFG_IMMR;
+    volatile immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
     immr->im_cpm.cp_scc[CONFIG_ETHER_INDEX-1].scc_gsmrl |= (SCC_GSMRL_ENR |
 							    SCC_GSMRL_ENT);
 }
diff --git a/cpu/mpc8260/i2c.c b/cpu/mpc8260/i2c.c
index c3af7b6d8..35cf8f143 100644
--- a/cpu/mpc8260/i2c.c
+++ b/cpu/mpc8260/i2c.c
@@ -36,6 +36,10 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
+#if defined(CONFIG_I2C_MULTI_BUS)
+static unsigned int i2c_bus_num __attribute__ ((section (".data"))) = 0;
+#endif /* CONFIG_I2C_MULTI_BUS */
+
 /* uSec to wait between polls of the i2c */
 #define DELAY_US	100
 /* uSec to wait for the CPM to start processing the buffer */
@@ -50,12 +54,12 @@ DECLARE_GLOBAL_DATA_PTR;
 /*-----------------------------------------------------------------------
  * Set default values
  */
-#ifndef	CFG_I2C_SPEED
-#define	CFG_I2C_SPEED	50000
+#ifndef	CONFIG_SYS_I2C_SPEED
+#define	CONFIG_SYS_I2C_SPEED	50000
 #endif
 
-#ifndef	CFG_I2C_SLAVE
-#define	CFG_I2C_SLAVE	0xFE
+#ifndef	CONFIG_SYS_I2C_SLAVE
+#define	CONFIG_SYS_I2C_SLAVE	0xFE
 #endif
 /*-----------------------------------------------------------------------
  */
@@ -172,7 +176,7 @@ i2c_roundrate(int hz, int speed, int filter, int modval,
  */
 static int i2c_setrate(int hz, int speed)
 {
-    immap_t	*immap = (immap_t *)CFG_IMMR ;
+    immap_t	*immap = (immap_t *)CONFIG_SYS_IMMR ;
     volatile i2c8260_t *i2c = (i2c8260_t *)&immap->im_i2c;
     int brgval,
 	  modval,	/* 0-3 */
@@ -215,7 +219,7 @@ static int i2c_setrate(int hz, int speed)
 
 void i2c_init(int speed, int slaveadd)
 {
-	volatile immap_t *immap = (immap_t *)CFG_IMMR ;
+	volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR ;
 	volatile cpm8260_t *cp = (cpm8260_t *)&immap->im_cpm;
 	volatile i2c8260_t *i2c	= (i2c8260_t *)&immap->im_i2c;
 	volatile iic_t *iip;
@@ -223,7 +227,7 @@ void i2c_init(int speed, int slaveadd)
 	volatile I2C_BD *rxbd, *txbd;
 	uint dpaddr;
 
-#ifdef CFG_I2C_INIT_BOARD
+#ifdef CONFIG_SYS_I2C_INIT_BOARD
 	/* call board specific i2c bus reset routine before accessing the   */
 	/* environment, which might be in a chip on that bus. For details   */
 	/* about this problem see doc/I2C_Edge_Conditions.                  */
@@ -266,7 +270,7 @@ void i2c_init(int speed, int slaveadd)
 	 * divide BRGCLK by 1)
 	 */
 	PRINTD(("[I2C] Setting rate...\n"));
-	i2c_setrate (gd->brg_clk, CFG_I2C_SPEED) ;
+	i2c_setrate (gd->brg_clk, CONFIG_SYS_I2C_SPEED) ;
 
 	/* Set I2C controller in master mode */
 	i2c->i2c_i2com = 0x01;
@@ -305,7 +309,7 @@ void i2c_init(int speed, int slaveadd)
 static
 void i2c_newio(i2c_state_t *state)
 {
-	volatile immap_t *immap = (immap_t *)CFG_IMMR ;
+	volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR ;
 	volatile iic_t *iip;
 	uint dpaddr;
 
@@ -490,7 +494,7 @@ int i2c_receive(i2c_state_t *state,
 static
 int i2c_doio(i2c_state_t *state)
 {
-	volatile immap_t *immap = (immap_t *)CFG_IMMR ;
+	volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR ;
 	volatile iic_t *iip;
 	volatile i2c8260_t *i2c	= (i2c8260_t *)&immap->im_i2c;
 	volatile I2C_BD *txbd, *rxbd;
@@ -663,7 +667,7 @@ i2c_read(uchar chip, uint addr, int alen, uchar *buffer, int len)
 	xaddr[2] = (addr >>  8) & 0xFF;
 	xaddr[3] =  addr        & 0xFF;
 
-#ifdef CFG_I2C_EEPROM_ADDR_OVERFLOW
+#ifdef CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW
 	 /*
 	  * EEPROM chips that implement "address overflow" are ones
 	  * like Catalyst 24WC04/08/16 which has 9/10/11 bits of address
@@ -675,7 +679,7 @@ i2c_read(uchar chip, uint addr, int alen, uchar *buffer, int len)
 	  * be one byte because the extra address bits are hidden in the
 	  * chip address.
 	  */
-	chip |= ((addr >> (alen * 8)) & CFG_I2C_EEPROM_ADDR_OVERFLOW);
+	chip |= ((addr >> (alen * 8)) & CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW);
 #endif
 
 	i2c_newio(&state);
@@ -712,7 +716,7 @@ i2c_write(uchar chip, uint addr, int alen, uchar *buffer, int len)
 	xaddr[2] = (addr >>  8) & 0xFF;
 	xaddr[3] =  addr        & 0xFF;
 
-#ifdef CFG_I2C_EEPROM_ADDR_OVERFLOW
+#ifdef CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW
 	 /*
 	  * EEPROM chips that implement "address overflow" are ones
 	  * like Catalyst 24WC04/08/16 which has 9/10/11 bits of address
@@ -724,7 +728,7 @@ i2c_write(uchar chip, uint addr, int alen, uchar *buffer, int len)
 	  * be one byte because the extra address bits are hidden in the
 	  * chip address.
 	  */
-	chip |= ((addr >> (alen * 8)) & CFG_I2C_EEPROM_ADDR_OVERFLOW);
+	chip |= ((addr >> (alen * 8)) & CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW);
 #endif
 
 	i2c_newio(&state);
@@ -749,20 +753,49 @@ i2c_write(uchar chip, uint addr, int alen, uchar *buffer, int len)
 	return 0;
 }
 
-uchar
-i2c_reg_read(uchar chip, uchar reg)
+#if defined(CONFIG_I2C_MULTI_BUS)
+/*
+ * Functions for multiple I2C bus handling
+ */
+unsigned int i2c_get_bus_num(void)
 {
-	uchar buf;
-
-	i2c_read(chip, reg, 1, &buf, 1);
+	return i2c_bus_num;
+}
 
-	return (buf);
+int i2c_set_bus_num(unsigned int bus)
+{
+#if defined(CONFIG_I2C_MUX)
+	if (bus < CONFIG_SYS_MAX_I2C_BUS) {
+		i2c_bus_num = bus;
+	} else {
+		int	ret;
+
+		ret = i2x_mux_select_mux(bus);
+		if (ret == 0)
+			i2c_bus_num = bus;
+		else
+			return ret;
+	}
+#else
+	if (bus >= CONFIG_SYS_MAX_I2C_BUS)
+		return -1;
+	i2c_bus_num = bus;
+#endif
+	return 0;
+}
+/* TODO: add 100/400k switching */
+unsigned int i2c_get_bus_speed(void)
+{
+	return CONFIG_SYS_I2C_SPEED;
 }
 
-void
-i2c_reg_write(uchar chip, uchar reg, uchar val)
+int i2c_set_bus_speed(unsigned int speed)
 {
-	i2c_write(chip, reg, 1, &val, 1);
+	if (speed != CONFIG_SYS_I2C_SPEED)
+		return -1;
+
+	return 0;
 }
 
+#endif	/* CONFIG_I2C_MULTI_BUS */
 #endif	/* CONFIG_HARD_I2C */
diff --git a/cpu/mpc8260/interrupts.c b/cpu/mpc8260/interrupts.c
index bf0d4d0d5..a7700c4b6 100644
--- a/cpu/mpc8260/interrupts.c
+++ b/cpu/mpc8260/interrupts.c
@@ -82,7 +82,7 @@ static u_char irq_to_siubit[] = {
 
 static void m8260_mask_irq (unsigned int irq_nr)
 {
-	volatile immap_t *immr = (immap_t *) CFG_IMMR;
+	volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
 	int bit, word;
 	volatile uint *simr;
 
@@ -96,7 +96,7 @@ static void m8260_mask_irq (unsigned int irq_nr)
 
 static void m8260_unmask_irq (unsigned int irq_nr)
 {
-	volatile immap_t *immr = (immap_t *) CFG_IMMR;
+	volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
 	int bit, word;
 	volatile uint *simr;
 
@@ -110,7 +110,7 @@ static void m8260_unmask_irq (unsigned int irq_nr)
 
 static void m8260_mask_and_ack (unsigned int irq_nr)
 {
-	volatile immap_t *immr = (immap_t *) CFG_IMMR;
+	volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
 	int bit, word;
 	volatile uint *simr, *sipnr;
 
@@ -126,7 +126,7 @@ static void m8260_mask_and_ack (unsigned int irq_nr)
 
 static int m8260_get_irq (struct pt_regs *regs)
 {
-	volatile immap_t *immr = (immap_t *) CFG_IMMR;
+	volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
 	int irq;
 	unsigned long bits;
 
@@ -142,9 +142,9 @@ static int m8260_get_irq (struct pt_regs *regs)
 
 int interrupt_init_cpu (unsigned *decrementer_count)
 {
-	volatile immap_t *immr = (immap_t *) CFG_IMMR;
+	volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
 
-	*decrementer_count = (gd->bus_clk / 4) / CFG_HZ;
+	*decrementer_count = (gd->bus_clk / 4) / CONFIG_SYS_HZ;
 
 	/* Initialize the default interrupt mapping priorities */
 	immr->im_intctl.ic_sicr = 0;
diff --git a/cpu/mpc8260/kgdb.S b/cpu/mpc8260/kgdb.S
index dae87bb97..c5936c734 100644
--- a/cpu/mpc8260/kgdb.S
+++ b/cpu/mpc8260/kgdb.S
@@ -50,21 +50,21 @@ kgdb_flush_cache_all:
 
 	.globl	kgdb_flush_cache_range
 kgdb_flush_cache_range:
-	li	r5,CFG_CACHELINE_SIZE-1
+	li	r5,CONFIG_SYS_CACHELINE_SIZE-1
 	andc	r3,r3,r5
 	subf	r4,r3,r4
 	add	r4,r4,r5
-	srwi.	r4,r4,CFG_CACHELINE_SHIFT
+	srwi.	r4,r4,CONFIG_SYS_CACHELINE_SHIFT
 	beqlr
 	mtctr	r4
 	mr	r6,r3
 1:	dcbst	0,r3
-	addi	r3,r3,CFG_CACHELINE_SIZE
+	addi	r3,r3,CONFIG_SYS_CACHELINE_SIZE
 	bdnz	1b
 	sync				/* wait for dcbst's to get to ram */
 	mtctr	r4
 2:	icbi	0,r6
-	addi	r6,r6,CFG_CACHELINE_SIZE
+	addi	r6,r6,CONFIG_SYS_CACHELINE_SIZE
 	bdnz	2b
 	SYNC
 	blr
diff --git a/cpu/mpc8260/pci.c b/cpu/mpc8260/pci.c
index 82303644b..378d6c573 100644
--- a/cpu/mpc8260/pci.c
+++ b/cpu/mpc8260/pci.c
@@ -70,23 +70,23 @@ DECLARE_GLOBAL_DATA_PTR;
  * This window is set up using the first set of Inbound ATU registers
  */
 
-#ifndef CFG_PCI_SLV_MEM_LOCAL
-#define PCI_SLV_MEM_LOCAL CFG_SDRAM_BASE	/* Local base */
+#ifndef CONFIG_SYS_PCI_SLV_MEM_LOCAL
+#define PCI_SLV_MEM_LOCAL CONFIG_SYS_SDRAM_BASE	/* Local base */
 #else
-#define PCI_SLV_MEM_LOCAL CFG_PCI_SLV_MEM_LOCAL
+#define PCI_SLV_MEM_LOCAL CONFIG_SYS_PCI_SLV_MEM_LOCAL
 #endif
 
-#ifndef CFG_PCI_SLV_MEM_BUS
+#ifndef CONFIG_SYS_PCI_SLV_MEM_BUS
 #define PCI_SLV_MEM_BUS 0x00000000	/* PCI base */
 #else
-#define PCI_SLV_MEM_BUS CFG_PCI_SLV_MEM_BUS
+#define PCI_SLV_MEM_BUS CONFIG_SYS_PCI_SLV_MEM_BUS
 #endif
 
-#ifndef CFG_PICMR0_MASK_ATTRIB
+#ifndef CONFIG_SYS_PICMR0_MASK_ATTRIB
 #define PICMR0_MASK_ATTRIB	(PICMR_MASK_512MB | PICMR_ENABLE | \
 				 PICMR_PREFETCH_EN)
 #else
-#define PICMR0_MASK_ATTRIB CFG_PICMR0_MASK_ATTRIB
+#define PICMR0_MASK_ATTRIB CONFIG_SYS_PICMR0_MASK_ATTRIB
 #endif
 
 /*
@@ -97,29 +97,29 @@ DECLARE_GLOBAL_DATA_PTR;
  */
 
 /* PCIBR0 */
-#ifndef CFG_PCI_MSTR0_LOCAL
+#ifndef CONFIG_SYS_PCI_MSTR0_LOCAL
 #define PCI_MSTR0_LOCAL		0x80000000	/* Local base */
 #else
-#define PCI_MSTR0_LOCAL CFG_PCI_MSTR0_LOCAL
+#define PCI_MSTR0_LOCAL CONFIG_SYS_PCI_MSTR0_LOCAL
 #endif
 
-#ifndef CFG_PCIMSK0_MASK
+#ifndef CONFIG_SYS_PCIMSK0_MASK
 #define PCIMSK0_MASK		PCIMSK_1GB	/* Size of window */
 #else
-#define PCIMSK0_MASK	CFG_PCIMSK0_MASK
+#define PCIMSK0_MASK	CONFIG_SYS_PCIMSK0_MASK
 #endif
 
 /* PCIBR1 */
-#ifndef CFG_PCI_MSTR1_LOCAL
+#ifndef CONFIG_SYS_PCI_MSTR1_LOCAL
 #define PCI_MSTR1_LOCAL		0xF4000000	/* Local base */
 #else
-#define PCI_MSTR1_LOCAL		CFG_PCI_MSTR1_LOCAL
+#define PCI_MSTR1_LOCAL		CONFIG_SYS_PCI_MSTR1_LOCAL
 #endif
 
-#ifndef CFG_PCIMSK1_MASK
+#ifndef CONFIG_SYS_PCIMSK1_MASK
 #define	 PCIMSK1_MASK		PCIMSK_64MB	/* Size of window */
 #else
-#define	 PCIMSK1_MASK		CFG_PCIMSK1_MASK
+#define	 PCIMSK1_MASK		CONFIG_SYS_PCIMSK1_MASK
 #endif
 
 /*
@@ -128,34 +128,34 @@ DECLARE_GLOBAL_DATA_PTR;
  * in the bridge.
  */
 
-#ifndef CFG_PCI_MSTR_MEM_LOCAL
+#ifndef CONFIG_SYS_PCI_MSTR_MEM_LOCAL
 #define PCI_MSTR_MEM_LOCAL 0x80000000	/* Local base */
 #else
-#define PCI_MSTR_MEM_LOCAL CFG_PCI_MSTR_MEM_LOCAL
+#define PCI_MSTR_MEM_LOCAL CONFIG_SYS_PCI_MSTR_MEM_LOCAL
 #endif
 
-#ifndef CFG_PCI_MSTR_MEM_BUS
+#ifndef CONFIG_SYS_PCI_MSTR_MEM_BUS
 #define PCI_MSTR_MEM_BUS 0x80000000	/* PCI base   */
 #else
-#define PCI_MSTR_MEM_BUS CFG_PCI_MSTR_MEM_BUS
+#define PCI_MSTR_MEM_BUS CONFIG_SYS_PCI_MSTR_MEM_BUS
 #endif
 
-#ifndef CFG_CPU_PCI_MEM_START
+#ifndef CONFIG_SYS_CPU_PCI_MEM_START
 #define CPU_PCI_MEM_START PCI_MSTR_MEM_LOCAL
 #else
-#define CPU_PCI_MEM_START CFG_CPU_PCI_MEM_START
+#define CPU_PCI_MEM_START CONFIG_SYS_CPU_PCI_MEM_START
 #endif
 
-#ifndef CFG_PCI_MSTR_MEM_SIZE
+#ifndef CONFIG_SYS_PCI_MSTR_MEM_SIZE
 #define PCI_MSTR_MEM_SIZE 0x10000000	/* 256MB */
 #else
-#define PCI_MSTR_MEM_SIZE CFG_PCI_MSTR_MEM_SIZE
+#define PCI_MSTR_MEM_SIZE CONFIG_SYS_PCI_MSTR_MEM_SIZE
 #endif
 
-#ifndef CFG_POCMR0_MASK_ATTRIB
+#ifndef CONFIG_SYS_POCMR0_MASK_ATTRIB
 #define POCMR0_MASK_ATTRIB	(POCMR_MASK_256MB | POCMR_ENABLE | POCMR_PREFETCH_EN)
 #else
-#define POCMR0_MASK_ATTRIB CFG_POCMR0_MASK_ATTRIB
+#define POCMR0_MASK_ATTRIB CONFIG_SYS_POCMR0_MASK_ATTRIB
 #endif
 
 /*
@@ -164,34 +164,34 @@ DECLARE_GLOBAL_DATA_PTR;
  * in the bridge.
  */
 
-#ifndef CFG_PCI_MSTR_MEMIO_LOCAL
+#ifndef CONFIG_SYS_PCI_MSTR_MEMIO_LOCAL
 #define PCI_MSTR_MEMIO_LOCAL 0x90000000 /* Local base */
 #else
-#define PCI_MSTR_MEMIO_LOCAL CFG_PCI_MSTR_MEMIO_LOCAL
+#define PCI_MSTR_MEMIO_LOCAL CONFIG_SYS_PCI_MSTR_MEMIO_LOCAL
 #endif
 
-#ifndef CFG_PCI_MSTR_MEMIO_BUS
+#ifndef CONFIG_SYS_PCI_MSTR_MEMIO_BUS
 #define PCI_MSTR_MEMIO_BUS 0x90000000	/* PCI base   */
 #else
-#define PCI_MSTR_MEMIO_BUS CFG_PCI_MSTR_MEMIO_BUS
+#define PCI_MSTR_MEMIO_BUS CONFIG_SYS_PCI_MSTR_MEMIO_BUS
 #endif
 
-#ifndef CFG_CPU_PCI_MEMIO_START
+#ifndef CONFIG_SYS_CPU_PCI_MEMIO_START
 #define CPU_PCI_MEMIO_START PCI_MSTR_MEMIO_LOCAL
 #else
-#define CPU_PCI_MEMIO_START CFG_CPU_PCI_MEMIO_START
+#define CPU_PCI_MEMIO_START CONFIG_SYS_CPU_PCI_MEMIO_START
 #endif
 
-#ifndef CFG_PCI_MSTR_MEMIO_SIZE
+#ifndef CONFIG_SYS_PCI_MSTR_MEMIO_SIZE
 #define PCI_MSTR_MEMIO_SIZE 0x10000000	/* 256 MB */
 #else
-#define PCI_MSTR_MEMIO_SIZE CFG_PCI_MSTR_MEMIO_SIZE
+#define PCI_MSTR_MEMIO_SIZE CONFIG_SYS_PCI_MSTR_MEMIO_SIZE
 #endif
 
-#ifndef CFG_POCMR1_MASK_ATTRIB
+#ifndef CONFIG_SYS_POCMR1_MASK_ATTRIB
 #define POCMR1_MASK_ATTRIB	(POCMR_MASK_512MB | POCMR_ENABLE)
 #else
-#define POCMR1_MASK_ATTRIB CFG_POCMR1_MASK_ATTRIB
+#define POCMR1_MASK_ATTRIB CONFIG_SYS_POCMR1_MASK_ATTRIB
 #endif
 
 /*
@@ -200,34 +200,34 @@ DECLARE_GLOBAL_DATA_PTR;
  * in the bridge.
  */
 
-#ifndef CFG_PCI_MSTR_IO_LOCAL
+#ifndef CONFIG_SYS_PCI_MSTR_IO_LOCAL
 #define PCI_MSTR_IO_LOCAL 0xA0000000	/* Local base */
 #else
-#define PCI_MSTR_IO_LOCAL CFG_PCI_MSTR_IO_LOCAL
+#define PCI_MSTR_IO_LOCAL CONFIG_SYS_PCI_MSTR_IO_LOCAL
 #endif
 
-#ifndef CFG_PCI_MSTR_IO_BUS
+#ifndef CONFIG_SYS_PCI_MSTR_IO_BUS
 #define PCI_MSTR_IO_BUS 0xA0000000	/* PCI base   */
 #else
-#define PCI_MSTR_IO_BUS CFG_PCI_MSTR_IO_BUS
+#define PCI_MSTR_IO_BUS CONFIG_SYS_PCI_MSTR_IO_BUS
 #endif
 
-#ifndef CFG_CPU_PCI_IO_START
+#ifndef CONFIG_SYS_CPU_PCI_IO_START
 #define CPU_PCI_IO_START PCI_MSTR_IO_LOCAL
 #else
-#define CPU_PCI_IO_START CFG_CPU_PCI_IO_START
+#define CPU_PCI_IO_START CONFIG_SYS_CPU_PCI_IO_START
 #endif
 
-#ifndef CFG_PCI_MSTR_IO_SIZE
+#ifndef CONFIG_SYS_PCI_MSTR_IO_SIZE
 #define PCI_MSTR_IO_SIZE 0x10000000	/* 256MB */
 #else
-#define PCI_MSTR_IO_SIZE CFG_PCI_MSTR_IO_SIZE
+#define PCI_MSTR_IO_SIZE CONFIG_SYS_PCI_MSTR_IO_SIZE
 #endif
 
-#ifndef CFG_POCMR2_MASK_ATTRIB
+#ifndef CONFIG_SYS_POCMR2_MASK_ATTRIB
 #define POCMR2_MASK_ATTRIB	(POCMR_MASK_256MB | POCMR_ENABLE | POCMR_PCI_IO)
 #else
-#define POCMR2_MASK_ATTRIB CFG_POCMR2_MASK_ATTRIB
+#define POCMR2_MASK_ATTRIB CONFIG_SYS_POCMR2_MASK_ATTRIB
 #endif
 
 /* PCI bus configuration registers.
@@ -245,11 +245,11 @@ void pci_mpc8250_init (struct pci_controller *hose)
 {
 	u16 tempShort;
 
-	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
 	pci_dev_t host_devno = PCI_BDF (0, 0, 0);
 
-	pci_setup_indirect (hose, CFG_IMMR + PCI_CFG_ADDR_REG,
-			    CFG_IMMR + PCI_CFG_DATA_REG);
+	pci_setup_indirect (hose, CONFIG_SYS_IMMR + PCI_CFG_ADDR_REG,
+			    CONFIG_SYS_IMMR + PCI_CFG_DATA_REG);
 
 	/*
 	 * Setting required to enable local bus for PCI (SIUMCR [LBPC]).
@@ -413,8 +413,8 @@ void pci_mpc8250_init (struct pci_controller *hose)
 			gd->ram_size, PCI_REGION_MEM | PCI_REGION_MEMORY);
 #else
 	pci_set_region (hose->regions + 0,
-			CFG_SDRAM_BASE,
-			CFG_SDRAM_BASE,
+			CONFIG_SYS_SDRAM_BASE,
+			CONFIG_SYS_SDRAM_BASE,
 			0x4000000, PCI_REGION_MEM | PCI_REGION_MEMORY);
 #endif
 
diff --git a/cpu/mpc8260/serial_scc.c b/cpu/mpc8260/serial_scc.c
index 3a6eaf0a6..4ab6a2864 100644
--- a/cpu/mpc8260/serial_scc.c
+++ b/cpu/mpc8260/serial_scc.c
@@ -84,7 +84,7 @@ DECLARE_GLOBAL_DATA_PTR;
 
 int serial_init (void)
 {
-	volatile immap_t *im = (immap_t *)CFG_IMMR;
+	volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
 	volatile scc_t *sp;
 	volatile scc_uart_t *up;
 	volatile cbd_t *tbdf, *rbdf;
@@ -201,7 +201,7 @@ serial_putc(const char c)
 	if (c == '\n')
 		serial_putc ('\r');
 
-	im = (immap_t *)CFG_IMMR;
+	im = (immap_t *)CONFIG_SYS_IMMR;
 	up = (scc_uart_t *)&im->im_dprambase[PROFF_SCC];
 	tbdf = (cbd_t *)&im->im_dprambase[up->scc_genscc.scc_tbase];
 
@@ -233,7 +233,7 @@ serial_getc(void)
 	volatile immap_t	*im;
 	unsigned char		c;
 
-	im = (immap_t *)CFG_IMMR;
+	im = (immap_t *)CONFIG_SYS_IMMR;
 	up = (scc_uart_t *)&im->im_dprambase[PROFF_SCC];
 	rbdf = (cbd_t *)&im->im_dprambase[up->scc_genscc.scc_rbase];
 
@@ -257,7 +257,7 @@ serial_tstc()
 	volatile scc_uart_t	*up;
 	volatile immap_t	*im;
 
-	im = (immap_t *)CFG_IMMR;
+	im = (immap_t *)CONFIG_SYS_IMMR;
 	up = (scc_uart_t *)&im->im_dprambase[PROFF_SCC];
 	rbdf = (cbd_t *)&im->im_dprambase[up->scc_genscc.scc_rbase];
 
@@ -321,7 +321,7 @@ serial_tstc()
 void
 kgdb_serial_init (void)
 {
-	volatile immap_t *im = (immap_t *)CFG_IMMR;
+	volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
 	volatile scc_t *sp;
 	volatile scc_uart_t *up;
 	volatile cbd_t *tbdf, *rbdf;
@@ -440,7 +440,7 @@ putDebugChar(const char c)
 	if (c == '\n')
 		putDebugChar ('\r');
 
-	im = (immap_t *)CFG_IMMR;
+	im = (immap_t *)CONFIG_SYS_IMMR;
 	up = (scc_uart_t *)&im->im_dprambase[KGDB_PROFF_SCC];
 	tbdf = (cbd_t *)&im->im_dprambase[up->scc_genscc.scc_tbase];
 
@@ -472,7 +472,7 @@ getDebugChar(void)
 	volatile immap_t	*im;
 	unsigned char		c;
 
-	im = (immap_t *)CFG_IMMR;
+	im = (immap_t *)CONFIG_SYS_IMMR;
 	up = (scc_uart_t *)&im->im_dprambase[KGDB_PROFF_SCC];
 	rbdf = (cbd_t *)&im->im_dprambase[up->scc_genscc.scc_rbase];
 
diff --git a/cpu/mpc8260/serial_smc.c b/cpu/mpc8260/serial_smc.c
index f3dffeb11..a6efa6689 100644
--- a/cpu/mpc8260/serial_smc.c
+++ b/cpu/mpc8260/serial_smc.c
@@ -76,7 +76,7 @@ static unsigned char brg_map[] = {
 
 int serial_init (void)
 {
-	volatile immap_t *im = (immap_t *)CFG_IMMR;
+	volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
 	volatile smc_t *sp;
 	volatile smc_uart_t *up;
 	volatile cbd_t *tbdf, *rbdf;
@@ -186,7 +186,7 @@ serial_putc(const char c)
 	volatile cbd_t		*tbdf;
 	volatile char		*buf;
 	volatile smc_uart_t	*up;
-	volatile immap_t	*im = (immap_t *)CFG_IMMR;
+	volatile immap_t	*im = (immap_t *)CONFIG_SYS_IMMR;
 
 	if (c == '\n')
 		serial_putc ('\r');
@@ -220,7 +220,7 @@ serial_getc(void)
 	volatile cbd_t		*rbdf;
 	volatile unsigned char	*buf;
 	volatile smc_uart_t	*up;
-	volatile immap_t	*im = (immap_t *)CFG_IMMR;
+	volatile immap_t	*im = (immap_t *)CONFIG_SYS_IMMR;
 	unsigned char		c;
 
 	up = (smc_uart_t *)&(im->im_dprambase[PROFF_SMC]);
@@ -243,7 +243,7 @@ serial_tstc()
 {
 	volatile cbd_t		*rbdf;
 	volatile smc_uart_t	*up;
-	volatile immap_t	*im = (immap_t *)CFG_IMMR;
+	volatile immap_t	*im = (immap_t *)CONFIG_SYS_IMMR;
 
 	up = (smc_uart_t *)&(im->im_dprambase[PROFF_SMC]);
 
@@ -289,7 +289,7 @@ serial_tstc()
 void
 kgdb_serial_init (void)
 {
-	volatile immap_t *im = (immap_t *)CFG_IMMR;
+	volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
 	volatile smc_t *sp;
 	volatile smc_uart_t *up;
 	volatile cbd_t *tbdf, *rbdf;
@@ -401,7 +401,7 @@ putDebugChar(const char c)
 	volatile cbd_t		*tbdf;
 	volatile char		*buf;
 	volatile smc_uart_t	*up;
-	volatile immap_t	*im = (immap_t *)CFG_IMMR;
+	volatile immap_t	*im = (immap_t *)CONFIG_SYS_IMMR;
 
 	if (c == '\n')
 		putDebugChar ('\r');
@@ -435,7 +435,7 @@ getDebugChar(void)
 	volatile cbd_t		*rbdf;
 	volatile unsigned char	*buf;
 	volatile smc_uart_t	*up;
-	volatile immap_t	*im = (immap_t *)CFG_IMMR;
+	volatile immap_t	*im = (immap_t *)CONFIG_SYS_IMMR;
 	unsigned char		c;
 
 	up = (smc_uart_t *)&(im->im_dprambase[KGDB_PROFF_SMC]);
diff --git a/cpu/mpc8260/speed.c b/cpu/mpc8260/speed.c
index 8d280fbb7..0e1c2b065 100644
--- a/cpu/mpc8260/speed.c
+++ b/cpu/mpc8260/speed.c
@@ -107,7 +107,7 @@ corecnf_t corecnf_tab[] = {
 
 int get_clocks (void)
 {
-	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
 	ulong clkin;
 	ulong sccr, dfbrg;
 	ulong scmr, corecnf, busdf, cpmdf, plldf, pllmf;
@@ -191,7 +191,7 @@ int get_clocks (void)
 
 int prt_8260_clks (void)
 {
-	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
 	ulong sccr, dfbrg;
 	ulong scmr, corecnf, busdf, cpmdf, plldf, pllmf, pcidf;
 	corecnf_t *cp;
diff --git a/cpu/mpc8260/spi.c b/cpu/mpc8260/spi.c
index c1a607ca5..f5d2ac35a 100644
--- a/cpu/mpc8260/spi.c
+++ b/cpu/mpc8260/spi.c
@@ -63,8 +63,8 @@
  * The value 0x2000 makes it far enough from the start of the data
  * area (as well as from the stack pointer).
  * --------------------------------------------------------------- */
-#ifndef	CFG_SPI_INIT_OFFSET
-#define	CFG_SPI_INIT_OFFSET	0x2000
+#ifndef	CONFIG_SYS_SPI_INIT_OFFSET
+#define	CONFIG_SYS_SPI_INIT_OFFSET	0x2000
 #endif
 
 #define CPM_SPI_BASE 0x100
@@ -119,11 +119,11 @@ ssize_t spi_xfer (size_t);
  * Initially we place the RX and TX buffers at a fixed location in DPRAM!
  * ---------------------------------------------------------------------- */
 static uchar *rxbuf =
-  (uchar *)&((immap_t *)CFG_IMMR)->im_dprambase
-			[CFG_SPI_INIT_OFFSET];
+  (uchar *)&((immap_t *)CONFIG_SYS_IMMR)->im_dprambase
+			[CONFIG_SYS_SPI_INIT_OFFSET];
 static uchar *txbuf =
-  (uchar *)&((immap_t *)CFG_IMMR)->im_dprambase
-			[CFG_SPI_INIT_OFFSET+MAX_BUFFER];
+  (uchar *)&((immap_t *)CONFIG_SYS_IMMR)->im_dprambase
+			[CONFIG_SYS_SPI_INIT_OFFSET+MAX_BUFFER];
 
 /* **************************************************************************
  *
@@ -143,7 +143,7 @@ void spi_init_f (void)
 	volatile cpm8260_t *cp;
 	volatile cbd_t *tbdf, *rbdf;
 
-	immr = (immap_t *)  CFG_IMMR;
+	immr = (immap_t *)  CONFIG_SYS_IMMR;
 	cp   = (cpm8260_t *) &immr->im_cpm;
 
 	*(ushort *)(&immr->im_dprambase[PROFF_SPI_BASE]) = PROFF_SPI;
@@ -200,7 +200,7 @@ void spi_init_f (void)
 	/* Allocate space for one transmit and one receive buffer
 	 * descriptor in the DP ram
 	 */
-#ifdef CFG_ALLOC_DPRAM
+#ifdef CONFIG_SYS_ALLOC_DPRAM
 	dpaddr = m8260_cpm_dpalloc (sizeof(cbd_t)*2, 8);
 #else
 	dpaddr = CPM_SPI_BASE;
@@ -279,7 +279,7 @@ void spi_init_r (void)
 	volatile cpm8260_t *cp;
 	volatile cbd_t *tbdf, *rbdf;
 
-	immr = (immap_t *)  CFG_IMMR;
+	immr = (immap_t *)  CONFIG_SYS_IMMR;
 	cp   = (cpm8260_t *) &immr->im_cpm;
 
 	spi  = (spi_t *)&immr->im_dprambase[PROFF_SPI];
@@ -365,7 +365,7 @@ ssize_t spi_xfer (size_t count)
 
 	DPRINT (("*** spi_xfer entered ***\n"));
 
-	immr = (immap_t *) CFG_IMMR;
+	immr = (immap_t *) CONFIG_SYS_IMMR;
 	cp   = (cpm8260_t *) &immr->im_cpm;
 
 	spi  = (spi_t *)&immr->im_dprambase[PROFF_SPI];
diff --git a/cpu/mpc8260/start.S b/cpu/mpc8260/start.S
index 7f5dc819c..379f2fb17 100644
--- a/cpu/mpc8260/start.S
+++ b/cpu/mpc8260/start.S
@@ -27,6 +27,7 @@
  */
 #include <config.h>
 #include <mpc8260.h>
+#include <timestamp.h>
 #include <version.h>
 
 #define CONFIG_8260 1		/* needed for Linux kernel header files */
@@ -85,7 +86,7 @@
 	.globl	version_string
 version_string:
 	.ascii U_BOOT_VERSION
-	.ascii " (", __DATE__, " - ", __TIME__, ")"
+	.ascii " (", U_BOOT_DATE, " - ", U_BOOT_TIME, ")"
 	.ascii CONFIG_IDENT_STRING, "\0"
 
 /*
@@ -127,14 +128,14 @@ version_string:
 	.text
 	.globl	_hrcw_table
 _hrcw_table:
-	_HRCW_TABLE_ENTRY(CFG_HRCW_MASTER)
-	_HRCW_TABLE_ENTRY(CFG_HRCW_SLAVE1)
-	_HRCW_TABLE_ENTRY(CFG_HRCW_SLAVE2)
-	_HRCW_TABLE_ENTRY(CFG_HRCW_SLAVE3)
-	_HRCW_TABLE_ENTRY(CFG_HRCW_SLAVE4)
-	_HRCW_TABLE_ENTRY(CFG_HRCW_SLAVE5)
-	_HRCW_TABLE_ENTRY(CFG_HRCW_SLAVE6)
-	_HRCW_TABLE_ENTRY(CFG_HRCW_SLAVE7)
+	_HRCW_TABLE_ENTRY(CONFIG_SYS_HRCW_MASTER)
+	_HRCW_TABLE_ENTRY(CONFIG_SYS_HRCW_SLAVE1)
+	_HRCW_TABLE_ENTRY(CONFIG_SYS_HRCW_SLAVE2)
+	_HRCW_TABLE_ENTRY(CONFIG_SYS_HRCW_SLAVE3)
+	_HRCW_TABLE_ENTRY(CONFIG_SYS_HRCW_SLAVE4)
+	_HRCW_TABLE_ENTRY(CONFIG_SYS_HRCW_SLAVE5)
+	_HRCW_TABLE_ENTRY(CONFIG_SYS_HRCW_SLAVE6)
+	_HRCW_TABLE_ENTRY(CONFIG_SYS_HRCW_SLAVE7)
 /*
  *  After configuration, a system reset exception is executed using the
  *  vector at offset 0x100 relative to the base set by MSR[IP]. If MSR[IP]
@@ -172,8 +173,8 @@ _start_warm:
 	b	boot_warm
 
 boot_cold:
-#if defined(CONFIG_MPC8260ADS) && defined(CFG_DEFAULT_IMMR)
-	lis	r3, CFG_DEFAULT_IMMR@h
+#if defined(CONFIG_MPC8260ADS) && defined(CONFIG_SYS_DEFAULT_IMMR)
+	lis	r3, CONFIG_SYS_DEFAULT_IMMR@h
 	nop
 	lwz	r4, 0(r3)
 	nop
@@ -183,7 +184,7 @@ boot_cold:
 	nop
 	stw	r4, 0(r3)
 	nop
-#endif /* CONFIG_MPC8260ADS && CFG_DEFAULT_IMMR */
+#endif /* CONFIG_MPC8260ADS && CONFIG_SYS_DEFAULT_IMMR */
 boot_warm:
 	mfmsr	r5			/* save msr contents		*/
 
@@ -195,24 +196,24 @@ boot_warm:
 	bl	cogent_init_8260
 #endif	/* CONFIG_COGENT */
 
-#if defined(CFG_DEFAULT_IMMR)
-	lis	r3, CFG_IMMR@h
-	ori	r3, r3, CFG_IMMR@l
-	lis	r4, CFG_DEFAULT_IMMR@h
+#if defined(CONFIG_SYS_DEFAULT_IMMR)
+	lis	r3, CONFIG_SYS_IMMR@h
+	ori	r3, r3, CONFIG_SYS_IMMR@l
+	lis	r4, CONFIG_SYS_DEFAULT_IMMR@h
 	stw	r3, 0x1A8(r4)
-#endif /* CFG_DEFAULT_IMMR */
+#endif /* CONFIG_SYS_DEFAULT_IMMR */
 
 	/* Initialise the MPC8260 processor core			*/
 	/*--------------------------------------------------------------*/
 
 	bl	init_8260_core
 
-#ifndef CFG_RAMBOOT
+#ifndef CONFIG_SYS_RAMBOOT
 	/* When booting from ROM (Flash or EPROM), clear the		*/
 	/* Address Mask in OR0 so ROM appears everywhere		*/
 	/*--------------------------------------------------------------*/
 
-	lis	r3, (CFG_IMMR+IM_REGBASE)@h
+	lis	r3, (CONFIG_SYS_IMMR+IM_REGBASE)@h
 	lwz	r4, IM_OR0@l(r3)
 	li	r5, 0x7fff
 	and	r4, r4, r5
@@ -221,20 +222,20 @@ boot_warm:
 	/* Calculate absolute address in FLASH and jump there		*/
 	/*--------------------------------------------------------------*/
 
-	lis	r3, CFG_MONITOR_BASE@h
-	ori	r3, r3, CFG_MONITOR_BASE@l
+	lis	r3, CONFIG_SYS_MONITOR_BASE@h
+	ori	r3, r3, CONFIG_SYS_MONITOR_BASE@l
 	addi	r3, r3, in_flash - _start + EXC_OFF_SYS_RESET
 	mtlr	r3
 	blr
 
 in_flash:
-#endif	/* CFG_RAMBOOT */
+#endif	/* CONFIG_SYS_RAMBOOT */
 
 	/* initialize some things that are hard to access from C	*/
 	/*--------------------------------------------------------------*/
 
-	lis	r3, CFG_IMMR@h		/* set up stack in internal DPRAM */
-	ori	r1, r3, CFG_INIT_SP_OFFSET
+	lis	r3, CONFIG_SYS_IMMR@h		/* set up stack in internal DPRAM */
+	ori	r1, r3, CONFIG_SYS_INIT_SP_OFFSET
 	li	r0, 0			/* Make room for stack frame header and	*/
 	stwu	r0, -4(r1)		/* clear final stack frame so that	*/
 	stwu	r0, -4(r1)		/* stack backtraces terminate cleanly	*/
@@ -458,18 +459,18 @@ cogent_init_8260:
 	/* Taken from page 14 of CMA282 manual				*/
 	/*--------------------------------------------------------------*/
 
-	lis	r4, (CFG_IMMR+IM_REGBASE)@h
-	lis	r3, CFG_IMMR@h
+	lis	r4, (CONFIG_SYS_IMMR+IM_REGBASE)@h
+	lis	r3, CONFIG_SYS_IMMR@h
 	stw	r3, IM_IMMR@l(r4)
 	lwz	r3, IM_IMMR@l(r4)
 	stw	r3, 0(r0)
-	lis	r3, CFG_SYPCR@h
-	ori	r3, r3, CFG_SYPCR@l
+	lis	r3, CONFIG_SYS_SYPCR@h
+	ori	r3, r3, CONFIG_SYS_SYPCR@l
 	stw	r3, IM_SYPCR@l(r4)
 	lwz	r3, IM_SYPCR@l(r4)
 	stw	r3, 4(r0)
-	lis	r3, CFG_SCCR@h
-	ori	r3, r3, CFG_SCCR@l
+	lis	r3, CONFIG_SYS_SCCR@h
+	ori	r3, r3, CONFIG_SYS_SCCR@l
 	stw	r3, IM_SCCR@l(r4)
 	lwz	r3, IM_SCCR@l(r4)
 	stw	r3, 8(r0)
@@ -521,10 +522,10 @@ init_8260_core:
 	/* Initialise the SYPCR early, and reset the watchdog (if req)	*/
 	/*--------------------------------------------------------------*/
 
-	lis	r3, (CFG_IMMR+IM_REGBASE)@h
+	lis	r3, (CONFIG_SYS_IMMR+IM_REGBASE)@h
 #if !defined(CONFIG_COGENT)
-	lis	r4, CFG_SYPCR@h
-	ori	r4, r4, CFG_SYPCR@l
+	lis	r4, CONFIG_SYS_SYPCR@h
+	ori	r4, r4, CONFIG_SYS_SYPCR@l
 	stw	r4, IM_SYPCR@l(r3)
 #endif /* !CONFIG_COGENT */
 #if defined(CONFIG_WATCHDOG)
@@ -538,18 +539,18 @@ init_8260_core:
 	/* HID0 also contains cache control				*/
 	/*--------------------------------------------------------------*/
 
-	lis	r3, CFG_HID0_INIT@h
-	ori	r3, r3, CFG_HID0_INIT@l
+	lis	r3, CONFIG_SYS_HID0_INIT@h
+	ori	r3, r3, CONFIG_SYS_HID0_INIT@l
 	SYNC
 	mtspr	HID0, r3
 
-	lis	r3, CFG_HID0_FINAL@h
-	ori	r3, r3, CFG_HID0_FINAL@l
+	lis	r3, CONFIG_SYS_HID0_FINAL@h
+	ori	r3, r3, CONFIG_SYS_HID0_FINAL@l
 	SYNC
 	mtspr	HID0, r3
 
-	lis	r3, CFG_HID2@h
-	ori	r3, r3, CFG_HID2@l
+	lis	r3, CONFIG_SYS_HID2@h
+	ori	r3, r3, CONFIG_SYS_HID2@l
 	mtspr	HID2, r3
 
 	/* clear all BAT's						*/
@@ -619,29 +620,29 @@ init_8260_core:
 	.globl	init_debug
 init_debug:
 
-	lis	r3, (CFG_IMMR+IM_REGBASE)@h
+	lis	r3, (CONFIG_SYS_IMMR+IM_REGBASE)@h
 
 	/* Quick and dirty hack to enable the RAM and copy the		*/
 	/* vectors so that we can take exceptions.			*/
 	/*--------------------------------------------------------------*/
 	/* write Memory Refresh Prescaler */
-	li	r4, CFG_MPTPR
+	li	r4, CONFIG_SYS_MPTPR
 	sth	r4, IM_MPTPR@l(r3)
 	/* write 60x Refresh Timer */
-	li	r4, CFG_PSRT
+	li	r4, CONFIG_SYS_PSRT
 	stb	r4, IM_PSRT@l(r3)
 	/* init the 60x SDRAM Mode Register */
-	lis	r4, (CFG_PSDMR|PSDMR_OP_NORM)@h
-	ori	r4, r4, (CFG_PSDMR|PSDMR_OP_NORM)@l
+	lis	r4, (CONFIG_SYS_PSDMR|PSDMR_OP_NORM)@h
+	ori	r4, r4, (CONFIG_SYS_PSDMR|PSDMR_OP_NORM)@l
 	stw	r4, IM_PSDMR@l(r3)
 	/* write Precharge All Banks command */
-	lis	r4, (CFG_PSDMR|PSDMR_OP_PREA)@h
-	ori	r4, r4, (CFG_PSDMR|PSDMR_OP_PREA)@l
+	lis	r4, (CONFIG_SYS_PSDMR|PSDMR_OP_PREA)@h
+	ori	r4, r4, (CONFIG_SYS_PSDMR|PSDMR_OP_PREA)@l
 	stw	r4, IM_PSDMR@l(r3)
 	stb	r0, 0(0)
 	/* write eight CBR Refresh commands */
-	lis	r4, (CFG_PSDMR|PSDMR_OP_CBRR)@h
-	ori	r4, r4, (CFG_PSDMR|PSDMR_OP_CBRR)@l
+	lis	r4, (CONFIG_SYS_PSDMR|PSDMR_OP_CBRR)@h
+	ori	r4, r4, (CONFIG_SYS_PSDMR|PSDMR_OP_CBRR)@l
 	stw	r4, IM_PSDMR@l(r3)
 	stb	r0, 0(0)
 	stb	r0, 0(0)
@@ -652,13 +653,13 @@ init_debug:
 	stb	r0, 0(0)
 	stb	r0, 0(0)
 	/* write Mode Register Write command */
-	lis	r4, (CFG_PSDMR|PSDMR_OP_MRW)@h
-	ori	r4, r4, (CFG_PSDMR|PSDMR_OP_MRW)@l
+	lis	r4, (CONFIG_SYS_PSDMR|PSDMR_OP_MRW)@h
+	ori	r4, r4, (CONFIG_SYS_PSDMR|PSDMR_OP_MRW)@l
 	stw	r4, IM_PSDMR@l(r3)
 	stb	r0, 0(0)
 	/* write Normal Operation command and enable Refresh */
-	lis	r4, (CFG_PSDMR|PSDMR_OP_NORM|PSDMR_RFEN)@h
-	ori	r4, r4, (CFG_PSDMR|PSDMR_OP_NORM|PSDMR_RFEN)@l
+	lis	r4, (CONFIG_SYS_PSDMR|PSDMR_OP_NORM|PSDMR_RFEN)@h
+	ori	r4, r4, (CONFIG_SYS_PSDMR|PSDMR_OP_NORM|PSDMR_RFEN)@l
 	stw	r4, IM_PSDMR@l(r3)
 	stb	r0, 0(0)
 	/* RAM should now be operational */
@@ -687,7 +688,7 @@ init_debug:
 	/* an exception is generated (before the instruction at that	*/
 	/* location completes). The vector for this exception is 0x1300 */
 	/*--------------------------------------------------------------*/
-	lis	r3, CFG_IMMR@h
+	lis	r3, CONFIG_SYS_IMMR@h
 	lwz	r3, 0(r3)
 	mtspr	IABR, r3
 
@@ -695,9 +696,9 @@ init_debug:
 	/* resides) to a known value - makes it easier to see where	*/
 	/* the stack has been written					*/
 	/*--------------------------------------------------------------*/
-	lis	r3, (CFG_IMMR + CFG_INIT_SP_OFFSET)@h
-	ori	r3, r3, (CFG_IMMR + CFG_INIT_SP_OFFSET)@l
-	li	r4, ((CFG_INIT_SP_OFFSET - 4) / 4)
+	lis	r3, (CONFIG_SYS_IMMR + CONFIG_SYS_INIT_SP_OFFSET)@h
+	ori	r3, r3, (CONFIG_SYS_IMMR + CONFIG_SYS_INIT_SP_OFFSET)@l
+	li	r4, ((CONFIG_SYS_INIT_SP_OFFSET - 4) / 4)
 	mtctr	r4
 	lis	r4, 0xdeadbeaf@h
 	ori	r4, r4, 0xdeadbeaf@l
@@ -807,16 +808,16 @@ relocate_code:
 	mr	r10, r5		/* Save copy of Destination Address	*/
 
 	mr	r3,  r5				/* Destination Address	*/
-	lis	r4, CFG_MONITOR_BASE@h		/* Source      Address	*/
-	ori	r4, r4, CFG_MONITOR_BASE@l
+	lis	r4, CONFIG_SYS_MONITOR_BASE@h		/* Source      Address	*/
+	ori	r4, r4, CONFIG_SYS_MONITOR_BASE@l
 	lwz	r5, GOT(__init_end)
 	sub	r5, r5, r4
-	li	r6, CFG_CACHELINE_SIZE		/* Cache Line Size	*/
+	li	r6, CONFIG_SYS_CACHELINE_SIZE		/* Cache Line Size	*/
 
 	/*
 	 * Fix GOT pointer:
 	 *
-	 * New GOT-PTR = (old GOT-PTR - CFG_MONITOR_BASE) + Destination Address
+	 * New GOT-PTR = (old GOT-PTR - CONFIG_SYS_MONITOR_BASE) + Destination Address
 	 *
 	 * Offset:
 	 */
diff --git a/cpu/mpc8260/traps.c b/cpu/mpc8260/traps.c
index b5d416c97..6624544ea 100644
--- a/cpu/mpc8260/traps.c
+++ b/cpu/mpc8260/traps.c
@@ -111,7 +111,7 @@ _exception(int signr, struct pt_regs *regs)
 void dump_pci (void)
 {
 
-	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
 
 	printf ("PCI: err status %x err mask %x err ctrl %x\n",
 		le32_to_cpu (immap->im_pci.pci_esr),
@@ -135,7 +135,7 @@ MachineCheckException(struct pt_regs *regs)
 	 * the PCI exception handler.
 	 */
 #ifdef CONFIG_PCI
-	volatile immap_t *immap  = (immap_t *)CFG_IMMR;
+	volatile immap_t *immap  = (immap_t *)CONFIG_SYS_IMMR;
 #ifdef DEBUG
 	dump_pci();
 #endif
diff --git a/cpu/mpc8260/u-boot.lds b/cpu/mpc8260/u-boot.lds
index 39f2ce9de..d65a93987 100644
--- a/cpu/mpc8260/u-boot.lds
+++ b/cpu/mpc8260/u-boot.lds
@@ -118,6 +118,7 @@ SECTIONS
    *(.dynbss)
    *(.bss)
    *(COMMON)
+   . = ALIGN(4);
   }
   _end = . ;
   PROVIDE (end = .);
diff --git a/cpu/mpc83xx/cpu.c b/cpu/mpc83xx/cpu.c
index 52e4476d8..587fca323 100644
--- a/cpu/mpc83xx/cpu.c
+++ b/cpu/mpc83xx/cpu.c
@@ -32,6 +32,8 @@
 #include <mpc83xx.h>
 #include <asm/processor.h>
 #include <libfdt.h>
+#include <tsec.h>
+#include <netdev.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -66,7 +68,7 @@ int checkcpu(void)
 		CPU_TYPE_ENTRY(8379),
 	};
 
-	immr = (immap_t *)CFG_IMMR;
+	immr = (immap_t *)CONFIG_SYS_IMMR;
 
 	puts("CPU:   ");
 
@@ -123,8 +125,8 @@ int checkcpu(void)
  * The 'dummy' variable is used to increment the MAD. 'dummy' is
  * supposed to be a pointer to the memory of the device being
  * programmed by the UPM.  The data in the MDR is written into
- * memory and the MAD is incremented every time there's a read
- * from 'dummy'. Unfortunately, the current prototype for this
+ * memory and the MAD is incremented every time there's a write
+ * to 'dummy'. Unfortunately, the current prototype for this
  * function doesn't allow for passing the address of this
  * device, and changing the prototype will break a number lots
  * of other code, so we need to use a round-about way of finding
@@ -146,9 +148,8 @@ int checkcpu(void)
  */
 void upmconfig (uint upm, uint *table, uint size)
 {
-#if defined(CONFIG_MPC834X)
-	volatile immap_t *immap = (immap_t *) CFG_IMMR;
-	volatile lbus83xx_t *lbus = &immap->lbus;
+	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
+	volatile fsl_lbus_t *lbus = &immap->lbus;
 	volatile uchar *dummy = NULL;
 	const u32 msel = (upm + 4) << BR_MSEL_SHIFT;	/* What the MSEL field in BRn should be */
 	volatile u32 *mxmr = &lbus->mamr + upm;	/* Pointer to mamr, mbmr, or mcmr */
@@ -173,16 +174,13 @@ void upmconfig (uint upm, uint *table, uint size)
 	for (i = 0; i < size; i++) {
 		lbus->mdr = table[i];
 		__asm__ __volatile__ ("sync");
-		*dummy;	/* Write the value to memory and increment MAD */
+		*dummy = 0;	/* Write the value to memory and increment MAD */
 		__asm__ __volatile__ ("sync");
+		while(((*mxmr & 0x3f) != ((i + 1) & 0x3f)));
 	}
 
 	/* Set the OP field in the MxMR to "normal" and the MAD field to 000000 */
 	*mxmr &= 0xCFFFFFC0;
-#else
-	printf("Error: %s() not defined for this configuration.\n", __FUNCTION__);
-	hang();
-#endif
 }
 
 
@@ -194,7 +192,7 @@ do_reset (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
 	ulong addr;
 #endif
 
-	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
 
 #ifdef MPC83xx_RESET
 	/* Interrupts and MMU off */
@@ -233,7 +231,7 @@ do_reset (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
 	 * Trying to execute the next instruction at a non-existing address
 	 * should cause a machine check, resulting in reset
 	 */
-	addr = CFG_RESET_ADDRESS;
+	addr = CONFIG_SYS_RESET_ADDRESS;
 
 	printf("resetting the board.");
 	printf("\n");
@@ -264,7 +262,7 @@ void watchdog_reset (void)
 	int re_enable = disable_interrupts();
 
 	/* Reset the 83xx watchdog */
-	volatile immap_t *immr = (immap_t *) CFG_IMMR;
+	volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
 	immr->wdt.swsrr = 0x556c;
 	immr->wdt.swsrr = 0xaa39;
 
@@ -276,7 +274,7 @@ void watchdog_reset (void)
 #if defined(CONFIG_DDR_ECC)
 void dma_init(void)
 {
-	volatile immap_t *immap = (immap_t *)CFG_IMMR;
+	volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR;
 	volatile dma83xx_t *dma = &immap->dma;
 	volatile u32 status = swab32(dma->dmasr0);
 	volatile u32 dmamr0 = swab32(dma->dmamr0);
@@ -307,7 +305,7 @@ void dma_init(void)
 
 uint dma_check(void)
 {
-	volatile immap_t *immap = (immap_t *)CFG_IMMR;
+	volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR;
 	volatile dma83xx_t *dma = &immap->dma;
 	volatile u32 status = swab32(dma->dmasr0);
 	volatile u32 byte_count = swab32(dma->dmabcr0);
@@ -326,7 +324,7 @@ uint dma_check(void)
 
 int dma_xfer(void *dest, u32 count, void *src)
 {
-	volatile immap_t *immap = (immap_t *)CFG_IMMR;
+	volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR;
 	volatile dma83xx_t *dma = &immap->dma;
 	volatile u32 dmamr0;
 
@@ -358,22 +356,32 @@ int dma_xfer(void *dest, u32 count, void *src)
 }
 #endif /*CONFIG_DDR_ECC*/
 
-#ifdef CONFIG_TSEC_ENET
-/* Default initializations for TSEC controllers.  To override,
- * create a board-specific function called:
- * 	int board_eth_init(bd_t *bis)
+/*
+ * Initializes on-chip ethernet controllers.
+ * to override, implement board_eth_init()
  */
-
-extern int tsec_initialize(bd_t * bis, int index, char *devname);
-
 int cpu_eth_init(bd_t *bis)
 {
-#if defined(CONFIG_TSEC1)
-	tsec_initialize(bis, 0, CONFIG_TSEC1_NAME);
+#if defined(CONFIG_UEC_ETH1)
+	uec_initialize(0);
+#endif
+#if defined(CONFIG_UEC_ETH2)
+	uec_initialize(1);
 #endif
-#if defined(CONFIG_TSEC2)
-	tsec_initialize(bis, 1, CONFIG_TSEC2_NAME);
+#if defined(CONFIG_UEC_ETH3)
+	uec_initialize(2);
+#endif
+#if defined(CONFIG_UEC_ETH4)
+	uec_initialize(3);
+#endif
+#if defined(CONFIG_UEC_ETH5)
+	uec_initialize(4);
+#endif
+#if defined(CONFIG_UEC_ETH6)
+	uec_initialize(5);
+#endif
+#if defined(CONFIG_TSEC_ENET)
+	tsec_standard_init(bis);
 #endif
 	return 0;
 }
-#endif
diff --git a/cpu/mpc83xx/cpu_init.c b/cpu/mpc83xx/cpu_init.c
index 67c9e570c..491c2e5c3 100644
--- a/cpu/mpc83xx/cpu_init.c
+++ b/cpu/mpc83xx/cpu_init.c
@@ -60,113 +60,117 @@ static void config_qe_ioports(void)
 void cpu_init_f (volatile immap_t * im)
 {
 	/* Pointer is writable since we allocated a register for it */
-	gd = (gd_t *) (CFG_INIT_RAM_ADDR + CFG_GBL_DATA_OFFSET);
+	gd = (gd_t *) (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET);
 
 	/* Clear initial global data */
 	memset ((void *) gd, 0, sizeof (gd_t));
 
 	/* system performance tweaking */
 
-#ifdef CFG_ACR_PIPE_DEP
+#ifdef CONFIG_SYS_ACR_PIPE_DEP
 	/* Arbiter pipeline depth */
 	im->arbiter.acr = (im->arbiter.acr & ~ACR_PIPE_DEP) |
-			  (CFG_ACR_PIPE_DEP << ACR_PIPE_DEP_SHIFT);
+			  (CONFIG_SYS_ACR_PIPE_DEP << ACR_PIPE_DEP_SHIFT);
 #endif
 
-#ifdef CFG_ACR_RPTCNT
+#ifdef CONFIG_SYS_ACR_RPTCNT
 	/* Arbiter repeat count */
 	im->arbiter.acr = (im->arbiter.acr & ~(ACR_RPTCNT)) |
-			  (CFG_ACR_RPTCNT << ACR_RPTCNT_SHIFT);
+			  (CONFIG_SYS_ACR_RPTCNT << ACR_RPTCNT_SHIFT);
 #endif
 
-#ifdef CFG_SPCR_OPT
+#ifdef CONFIG_SYS_SPCR_OPT
 	/* Optimize transactions between CSB and other devices */
 	im->sysconf.spcr = (im->sysconf.spcr & ~SPCR_OPT) |
-			   (CFG_SPCR_OPT << SPCR_OPT_SHIFT);
+			   (CONFIG_SYS_SPCR_OPT << SPCR_OPT_SHIFT);
 #endif
 
-#ifdef CFG_SPCR_TSECEP
+#ifdef CONFIG_SYS_SPCR_TSECEP
 	/* all eTSEC's Emergency priority */
 	im->sysconf.spcr = (im->sysconf.spcr & ~SPCR_TSECEP) |
-			   (CFG_SPCR_TSECEP << SPCR_TSECEP_SHIFT);
+			   (CONFIG_SYS_SPCR_TSECEP << SPCR_TSECEP_SHIFT);
 #endif
 
-#ifdef CFG_SPCR_TSEC1EP
+#ifdef CONFIG_SYS_SPCR_TSEC1EP
 	/* TSEC1 Emergency priority */
 	im->sysconf.spcr = (im->sysconf.spcr & ~SPCR_TSEC1EP) |
-			   (CFG_SPCR_TSEC1EP << SPCR_TSEC1EP_SHIFT);
+			   (CONFIG_SYS_SPCR_TSEC1EP << SPCR_TSEC1EP_SHIFT);
 #endif
 
-#ifdef CFG_SPCR_TSEC2EP
+#ifdef CONFIG_SYS_SPCR_TSEC2EP
 	/* TSEC2 Emergency priority */
 	im->sysconf.spcr = (im->sysconf.spcr & ~SPCR_TSEC2EP) |
-			   (CFG_SPCR_TSEC2EP << SPCR_TSEC2EP_SHIFT);
+			   (CONFIG_SYS_SPCR_TSEC2EP << SPCR_TSEC2EP_SHIFT);
 #endif
 
-#ifdef CFG_SCCR_ENCCM
+#ifdef CONFIG_SYS_SCCR_ENCCM
 	/* Encryption clock mode */
 	im->clk.sccr = (im->clk.sccr & ~SCCR_ENCCM) |
-		       (CFG_SCCR_ENCCM << SCCR_PCICM_SHIFT);
+		       (CONFIG_SYS_SCCR_ENCCM << SCCR_PCICM_SHIFT);
 #endif
 
-#ifdef CFG_SCCR_PCICM
+#ifdef CONFIG_SYS_SCCR_PCICM
 	/* PCI & DMA clock mode */
 	im->clk.sccr = (im->clk.sccr & ~SCCR_PCICM) |
-		       (CFG_SCCR_PCICM << SCCR_PCICM_SHIFT);
+		       (CONFIG_SYS_SCCR_PCICM << SCCR_PCICM_SHIFT);
 #endif
 
-#ifdef CFG_SCCR_TSECCM
+#ifdef CONFIG_SYS_SCCR_TSECCM
 	/* all TSEC's clock mode */
 	im->clk.sccr = (im->clk.sccr & ~SCCR_TSECCM) |
-		       (CFG_SCCR_TSECCM << SCCR_TSECCM_SHIFT);
+		       (CONFIG_SYS_SCCR_TSECCM << SCCR_TSECCM_SHIFT);
 #endif
 
-#ifdef CFG_SCCR_TSEC1CM
+#ifdef CONFIG_SYS_SCCR_TSEC1CM
 	/* TSEC1 clock mode */
 	im->clk.sccr = (im->clk.sccr & ~SCCR_TSEC1CM) |
-		       (CFG_SCCR_TSEC1CM << SCCR_TSEC1CM_SHIFT);
+		       (CONFIG_SYS_SCCR_TSEC1CM << SCCR_TSEC1CM_SHIFT);
 #endif
 
-#ifdef CFG_SCCR_TSEC2CM
+#ifdef CONFIG_SYS_SCCR_TSEC2CM
 	/* TSEC2 clock mode */
 	im->clk.sccr = (im->clk.sccr & ~SCCR_TSEC2CM) |
-		       (CFG_SCCR_TSEC2CM << SCCR_TSEC2CM_SHIFT);
+		       (CONFIG_SYS_SCCR_TSEC2CM << SCCR_TSEC2CM_SHIFT);
 #endif
 
-#ifdef CFG_SCCR_TSEC1ON
+#ifdef CONFIG_SYS_SCCR_TSEC1ON
 	/* TSEC1 clock switch */
 	im->clk.sccr = (im->clk.sccr & ~SCCR_TSEC1ON) |
-		       (CFG_SCCR_TSEC1ON << SCCR_TSEC1ON_SHIFT);
+		       (CONFIG_SYS_SCCR_TSEC1ON << SCCR_TSEC1ON_SHIFT);
 #endif
 
-#ifdef CFG_SCCR_TSEC2ON
+#ifdef CONFIG_SYS_SCCR_TSEC2ON
 	/* TSEC2 clock switch */
 	im->clk.sccr = (im->clk.sccr & ~SCCR_TSEC2ON) |
-		       (CFG_SCCR_TSEC2ON << SCCR_TSEC2ON_SHIFT);
+		       (CONFIG_SYS_SCCR_TSEC2ON << SCCR_TSEC2ON_SHIFT);
 #endif
 
-#ifdef CFG_SCCR_USBMPHCM
+#ifdef CONFIG_SYS_SCCR_USBMPHCM
 	/* USB MPH clock mode */
 	im->clk.sccr = (im->clk.sccr & ~SCCR_USBMPHCM) |
-		       (CFG_SCCR_USBMPHCM << SCCR_USBMPHCM_SHIFT);
+		       (CONFIG_SYS_SCCR_USBMPHCM << SCCR_USBMPHCM_SHIFT);
 #endif
 
-#ifdef CFG_SCCR_USBDRCM
+#ifdef CONFIG_SYS_SCCR_USBDRCM
 	/* USB DR clock mode */
 	im->clk.sccr = (im->clk.sccr & ~SCCR_USBDRCM) |
-		       (CFG_SCCR_USBDRCM << SCCR_USBDRCM_SHIFT);
+		       (CONFIG_SYS_SCCR_USBDRCM << SCCR_USBDRCM_SHIFT);
 #endif
 
-#ifdef CFG_SCCR_SATACM
+#ifdef CONFIG_SYS_SCCR_SATACM
 	/* SATA controller clock mode */
 	im->clk.sccr = (im->clk.sccr & ~SCCR_SATACM) |
-		       (CFG_SCCR_SATACM << SCCR_SATACM_SHIFT);
+		       (CONFIG_SYS_SCCR_SATACM << SCCR_SATACM_SHIFT);
 #endif
 
 	/* RSR - Reset Status Register - clear all status (4.6.1.3) */
 	gd->reset_status = im->reset.rsr;
 	im->reset.rsr = ~(RSR_RES);
 
+	/* AER - Arbiter Event Register - store status */
+	gd->arbiter_event_attributes = im->arbiter.aeatr;
+	gd->arbiter_event_address = im->arbiter.aeadr;
+
 	/*
 	 * RMR - Reset Mode Register
 	 * contains checkstop reset enable (4.6.1.4)
@@ -174,30 +178,30 @@ void cpu_init_f (volatile immap_t * im)
 	im->reset.rmr = (RMR_CSRE & (1<<RMR_CSRE_SHIFT));
 
 	/* LCRR - Clock Ratio Register (10.3.1.16) */
-	im->lbus.lcrr = CFG_LCRR;
+	im->lbus.lcrr = CONFIG_SYS_LCRR;
 
 	/* Enable Time Base & Decrimenter ( so we will have udelay() )*/
 	im->sysconf.spcr |= SPCR_TBEN;
 
 	/* System General Purpose Register */
-#ifdef CFG_SICRH
+#ifdef CONFIG_SYS_SICRH
 #if defined(CONFIG_MPC834X) || defined(CONFIG_MPC8313)
 	/* regarding to MPC34x manual rev.1 bits 28..29 must be preserved */
-	im->sysconf.sicrh = (im->sysconf.sicrh & 0x0000000C) | CFG_SICRH;
+	im->sysconf.sicrh = (im->sysconf.sicrh & 0x0000000C) | CONFIG_SYS_SICRH;
 #else
-	im->sysconf.sicrh = CFG_SICRH;
+	im->sysconf.sicrh = CONFIG_SYS_SICRH;
 #endif
 #endif
-#ifdef CFG_SICRL
-	im->sysconf.sicrl = CFG_SICRL;
+#ifdef CONFIG_SYS_SICRL
+	im->sysconf.sicrl = CONFIG_SYS_SICRL;
 #endif
 	/* DDR control driver register */
-#ifdef CFG_DDRCDR
-	im->sysconf.ddrcdr = CFG_DDRCDR;
+#ifdef CONFIG_SYS_DDRCDR
+	im->sysconf.ddrcdr = CONFIG_SYS_DDRCDR;
 #endif
 	/* Output buffer impedance register */
-#ifdef CFG_OBIR
-	im->sysconf.obir = CFG_OBIR;
+#ifdef CONFIG_SYS_OBIR
+	im->sysconf.obir = CONFIG_SYS_OBIR;
 #endif
 
 #ifdef CONFIG_QE
@@ -214,88 +218,88 @@ void cpu_init_f (volatile immap_t * im)
 	 * has been determined
 	 */
 
-#if defined(CFG_BR0_PRELIM)  \
-	&& defined(CFG_OR0_PRELIM) \
-	&& defined(CFG_LBLAWBAR0_PRELIM) \
-	&& defined(CFG_LBLAWAR0_PRELIM)
-	im->lbus.bank[0].br = CFG_BR0_PRELIM;
-	im->lbus.bank[0].or = CFG_OR0_PRELIM;
-	im->sysconf.lblaw[0].bar = CFG_LBLAWBAR0_PRELIM;
-	im->sysconf.lblaw[0].ar = CFG_LBLAWAR0_PRELIM;
+#if defined(CONFIG_SYS_BR0_PRELIM)  \
+	&& defined(CONFIG_SYS_OR0_PRELIM) \
+	&& defined(CONFIG_SYS_LBLAWBAR0_PRELIM) \
+	&& defined(CONFIG_SYS_LBLAWAR0_PRELIM)
+	im->lbus.bank[0].br = CONFIG_SYS_BR0_PRELIM;
+	im->lbus.bank[0].or = CONFIG_SYS_OR0_PRELIM;
+	im->sysconf.lblaw[0].bar = CONFIG_SYS_LBLAWBAR0_PRELIM;
+	im->sysconf.lblaw[0].ar = CONFIG_SYS_LBLAWAR0_PRELIM;
 #else
-#error	CFG_BR0_PRELIM, CFG_OR0_PRELIM, CFG_LBLAWBAR0_PRELIM & CFG_LBLAWAR0_PRELIM must be defined
+#error	CONFIG_SYS_BR0_PRELIM, CONFIG_SYS_OR0_PRELIM, CONFIG_SYS_LBLAWBAR0_PRELIM & CONFIG_SYS_LBLAWAR0_PRELIM must be defined
 #endif
 
-#if defined(CFG_BR1_PRELIM) && defined(CFG_OR1_PRELIM)
-	im->lbus.bank[1].br = CFG_BR1_PRELIM;
-	im->lbus.bank[1].or = CFG_OR1_PRELIM;
+#if defined(CONFIG_SYS_BR1_PRELIM) && defined(CONFIG_SYS_OR1_PRELIM)
+	im->lbus.bank[1].br = CONFIG_SYS_BR1_PRELIM;
+	im->lbus.bank[1].or = CONFIG_SYS_OR1_PRELIM;
 #endif
-#if defined(CFG_LBLAWBAR1_PRELIM) && defined(CFG_LBLAWAR1_PRELIM)
-	im->sysconf.lblaw[1].bar = CFG_LBLAWBAR1_PRELIM;
-	im->sysconf.lblaw[1].ar = CFG_LBLAWAR1_PRELIM;
+#if defined(CONFIG_SYS_LBLAWBAR1_PRELIM) && defined(CONFIG_SYS_LBLAWAR1_PRELIM)
+	im->sysconf.lblaw[1].bar = CONFIG_SYS_LBLAWBAR1_PRELIM;
+	im->sysconf.lblaw[1].ar = CONFIG_SYS_LBLAWAR1_PRELIM;
 #endif
-#if defined(CFG_BR2_PRELIM) && defined(CFG_OR2_PRELIM)
-	im->lbus.bank[2].br = CFG_BR2_PRELIM;
-	im->lbus.bank[2].or = CFG_OR2_PRELIM;
+#if defined(CONFIG_SYS_BR2_PRELIM) && defined(CONFIG_SYS_OR2_PRELIM)
+	im->lbus.bank[2].br = CONFIG_SYS_BR2_PRELIM;
+	im->lbus.bank[2].or = CONFIG_SYS_OR2_PRELIM;
 #endif
-#if defined(CFG_LBLAWBAR2_PRELIM) && defined(CFG_LBLAWAR2_PRELIM)
-	im->sysconf.lblaw[2].bar = CFG_LBLAWBAR2_PRELIM;
-	im->sysconf.lblaw[2].ar = CFG_LBLAWAR2_PRELIM;
+#if defined(CONFIG_SYS_LBLAWBAR2_PRELIM) && defined(CONFIG_SYS_LBLAWAR2_PRELIM)
+	im->sysconf.lblaw[2].bar = CONFIG_SYS_LBLAWBAR2_PRELIM;
+	im->sysconf.lblaw[2].ar = CONFIG_SYS_LBLAWAR2_PRELIM;
 #endif
-#if defined(CFG_BR3_PRELIM) && defined(CFG_OR3_PRELIM)
-	im->lbus.bank[3].br = CFG_BR3_PRELIM;
-	im->lbus.bank[3].or = CFG_OR3_PRELIM;
+#if defined(CONFIG_SYS_BR3_PRELIM) && defined(CONFIG_SYS_OR3_PRELIM)
+	im->lbus.bank[3].br = CONFIG_SYS_BR3_PRELIM;
+	im->lbus.bank[3].or = CONFIG_SYS_OR3_PRELIM;
 #endif
-#if defined(CFG_LBLAWBAR3_PRELIM) && defined(CFG_LBLAWAR3_PRELIM)
-	im->sysconf.lblaw[3].bar = CFG_LBLAWBAR3_PRELIM;
-	im->sysconf.lblaw[3].ar = CFG_LBLAWAR3_PRELIM;
+#if defined(CONFIG_SYS_LBLAWBAR3_PRELIM) && defined(CONFIG_SYS_LBLAWAR3_PRELIM)
+	im->sysconf.lblaw[3].bar = CONFIG_SYS_LBLAWBAR3_PRELIM;
+	im->sysconf.lblaw[3].ar = CONFIG_SYS_LBLAWAR3_PRELIM;
 #endif
-#if defined(CFG_BR4_PRELIM) && defined(CFG_OR4_PRELIM)
-	im->lbus.bank[4].br = CFG_BR4_PRELIM;
-	im->lbus.bank[4].or = CFG_OR4_PRELIM;
+#if defined(CONFIG_SYS_BR4_PRELIM) && defined(CONFIG_SYS_OR4_PRELIM)
+	im->lbus.bank[4].br = CONFIG_SYS_BR4_PRELIM;
+	im->lbus.bank[4].or = CONFIG_SYS_OR4_PRELIM;
 #endif
-#if defined(CFG_LBLAWBAR4_PRELIM) && defined(CFG_LBLAWAR4_PRELIM)
-	im->sysconf.lblaw[4].bar = CFG_LBLAWBAR4_PRELIM;
-	im->sysconf.lblaw[4].ar = CFG_LBLAWAR4_PRELIM;
+#if defined(CONFIG_SYS_LBLAWBAR4_PRELIM) && defined(CONFIG_SYS_LBLAWAR4_PRELIM)
+	im->sysconf.lblaw[4].bar = CONFIG_SYS_LBLAWBAR4_PRELIM;
+	im->sysconf.lblaw[4].ar = CONFIG_SYS_LBLAWAR4_PRELIM;
 #endif
-#if defined(CFG_BR5_PRELIM) && defined(CFG_OR5_PRELIM)
-	im->lbus.bank[5].br = CFG_BR5_PRELIM;
-	im->lbus.bank[5].or = CFG_OR5_PRELIM;
+#if defined(CONFIG_SYS_BR5_PRELIM) && defined(CONFIG_SYS_OR5_PRELIM)
+	im->lbus.bank[5].br = CONFIG_SYS_BR5_PRELIM;
+	im->lbus.bank[5].or = CONFIG_SYS_OR5_PRELIM;
 #endif
-#if defined(CFG_LBLAWBAR5_PRELIM) && defined(CFG_LBLAWAR5_PRELIM)
-	im->sysconf.lblaw[5].bar = CFG_LBLAWBAR5_PRELIM;
-	im->sysconf.lblaw[5].ar = CFG_LBLAWAR5_PRELIM;
+#if defined(CONFIG_SYS_LBLAWBAR5_PRELIM) && defined(CONFIG_SYS_LBLAWAR5_PRELIM)
+	im->sysconf.lblaw[5].bar = CONFIG_SYS_LBLAWBAR5_PRELIM;
+	im->sysconf.lblaw[5].ar = CONFIG_SYS_LBLAWAR5_PRELIM;
 #endif
-#if defined(CFG_BR6_PRELIM) && defined(CFG_OR6_PRELIM)
-	im->lbus.bank[6].br = CFG_BR6_PRELIM;
-	im->lbus.bank[6].or = CFG_OR6_PRELIM;
+#if defined(CONFIG_SYS_BR6_PRELIM) && defined(CONFIG_SYS_OR6_PRELIM)
+	im->lbus.bank[6].br = CONFIG_SYS_BR6_PRELIM;
+	im->lbus.bank[6].or = CONFIG_SYS_OR6_PRELIM;
 #endif
-#if defined(CFG_LBLAWBAR6_PRELIM) && defined(CFG_LBLAWAR6_PRELIM)
-	im->sysconf.lblaw[6].bar = CFG_LBLAWBAR6_PRELIM;
-	im->sysconf.lblaw[6].ar = CFG_LBLAWAR6_PRELIM;
+#if defined(CONFIG_SYS_LBLAWBAR6_PRELIM) && defined(CONFIG_SYS_LBLAWAR6_PRELIM)
+	im->sysconf.lblaw[6].bar = CONFIG_SYS_LBLAWBAR6_PRELIM;
+	im->sysconf.lblaw[6].ar = CONFIG_SYS_LBLAWAR6_PRELIM;
 #endif
-#if defined(CFG_BR7_PRELIM) && defined(CFG_OR7_PRELIM)
-	im->lbus.bank[7].br = CFG_BR7_PRELIM;
-	im->lbus.bank[7].or = CFG_OR7_PRELIM;
+#if defined(CONFIG_SYS_BR7_PRELIM) && defined(CONFIG_SYS_OR7_PRELIM)
+	im->lbus.bank[7].br = CONFIG_SYS_BR7_PRELIM;
+	im->lbus.bank[7].or = CONFIG_SYS_OR7_PRELIM;
 #endif
-#if defined(CFG_LBLAWBAR7_PRELIM) && defined(CFG_LBLAWAR7_PRELIM)
-	im->sysconf.lblaw[7].bar = CFG_LBLAWBAR7_PRELIM;
-	im->sysconf.lblaw[7].ar = CFG_LBLAWAR7_PRELIM;
+#if defined(CONFIG_SYS_LBLAWBAR7_PRELIM) && defined(CONFIG_SYS_LBLAWAR7_PRELIM)
+	im->sysconf.lblaw[7].bar = CONFIG_SYS_LBLAWBAR7_PRELIM;
+	im->sysconf.lblaw[7].ar = CONFIG_SYS_LBLAWAR7_PRELIM;
 #endif
-#ifdef CFG_GPIO1_PRELIM
-	im->gpio[0].dir = CFG_GPIO1_DIR;
-	im->gpio[0].dat = CFG_GPIO1_DAT;
+#ifdef CONFIG_SYS_GPIO1_PRELIM
+	im->gpio[0].dat = CONFIG_SYS_GPIO1_DAT;
+	im->gpio[0].dir = CONFIG_SYS_GPIO1_DIR;
 #endif
-#ifdef CFG_GPIO2_PRELIM
-	im->gpio[1].dir = CFG_GPIO2_DIR;
-	im->gpio[1].dat = CFG_GPIO2_DAT;
+#ifdef CONFIG_SYS_GPIO2_PRELIM
+	im->gpio[1].dat = CONFIG_SYS_GPIO2_DAT;
+	im->gpio[1].dir = CONFIG_SYS_GPIO2_DIR;
 #endif
 }
 
 int cpu_init_r (void)
 {
 #ifdef CONFIG_QE
-	uint qe_base = CFG_IMMR + 0x00100000; /* QE immr base */
+	uint qe_base = CONFIG_SYS_IMMR + 0x00100000; /* QE immr base */
 	qe_init(qe_base);
 	qe_reset();
 #endif
@@ -303,6 +307,130 @@ int cpu_init_r (void)
 }
 
 /*
+ * Print out the bus arbiter event
+ */
+#if defined(CONFIG_DISPLAY_AER_FULL)
+static int print_83xx_arb_event(int force)
+{
+	static char* event[] = {
+		"Address Time Out",
+		"Data Time Out",
+		"Address Only Transfer Type",
+		"External Control Word Transfer Type",
+		"Reserved Transfer Type",
+		"Transfer Error",
+		"reserved",
+		"reserved"
+	};
+	static char* master[] = {
+		"e300 Core Data Transaction",
+		"reserved",
+		"e300 Core Instruction Fetch",
+		"reserved",
+		"TSEC1",
+		"TSEC2",
+		"USB MPH",
+		"USB DR",
+		"Encryption Core",
+		"I2C Boot Sequencer",
+		"JTAG",
+		"reserved",
+		"eSDHC",
+		"PCI1",
+		"PCI2",
+		"DMA",
+		"QUICC Engine 00",
+		"QUICC Engine 01",
+		"QUICC Engine 10",
+		"QUICC Engine 11",
+		"reserved",
+		"reserved",
+		"reserved",
+		"reserved",
+		"SATA1",
+		"SATA2",
+		"SATA3",
+		"SATA4",
+		"reserved",
+		"PCI Express 1",
+		"PCI Express 2",
+		"TDM-DMAC"
+	};
+	static char *transfer[] = {
+		"Address-only, Clean Block",
+		"Address-only, lwarx reservation set",
+		"Single-beat or Burst write",
+		"reserved",
+		"Address-only, Flush Block",
+		"reserved",
+		"Burst write",
+		"reserved",
+		"Address-only, sync",
+		"Address-only, tlbsync",
+		"Single-beat or Burst read",
+		"Single-beat or Burst read",
+		"Address-only, Kill Block",
+		"Address-only, icbi",
+		"Burst read",
+		"reserved",
+		"Address-only, eieio",
+		"reserved",
+		"Single-beat write",
+		"reserved",
+		"ecowx - Illegal single-beat write",
+		"reserved",
+		"reserved",
+		"reserved",
+		"Address-only, TLB Invalidate",
+		"reserved",
+		"Single-beat or Burst read",
+		"reserved",
+		"eciwx - Illegal single-beat read",
+		"reserved",
+		"Burst read",
+		"reserved"
+	};
+
+	int etype = (gd->arbiter_event_attributes & AEATR_EVENT)
+	            >> AEATR_EVENT_SHIFT;
+	int mstr_id = (gd->arbiter_event_attributes & AEATR_MSTR_ID)
+	              >> AEATR_MSTR_ID_SHIFT;
+	int tbst = (gd->arbiter_event_attributes & AEATR_TBST)
+	           >> AEATR_TBST_SHIFT;
+	int tsize = (gd->arbiter_event_attributes & AEATR_TSIZE)
+	            >> AEATR_TSIZE_SHIFT;
+	int ttype = (gd->arbiter_event_attributes & AEATR_TTYPE)
+	            >> AEATR_TTYPE_SHIFT;
+
+	if (!force && !gd->arbiter_event_address)
+		return 0;
+
+	puts("Arbiter Event Status:\n");
+	printf("       Event Address: 0x%08lX\n", gd->arbiter_event_address);
+	printf("       Event Type:    0x%1x  = %s\n", etype, event[etype]);
+	printf("       Master ID:     0x%02x = %s\n", mstr_id, master[mstr_id]);
+	printf("       Transfer Size: 0x%1x  = %d bytes\n", (tbst<<3) | tsize,
+				tbst ? (tsize ? tsize : 8) : 16 + 8 * tsize);
+	printf("       Transfer Type: 0x%02x = %s\n", ttype, transfer[ttype]);
+
+	return gd->arbiter_event_address;
+}
+
+#elif defined(CONFIG_DISPLAY_AER_BRIEF)
+
+static int print_83xx_arb_event(int force)
+{
+	if (!force && !gd->arbiter_event_address)
+		return 0;
+
+	printf("Arbiter Event Status: AEATR=0x%08lX, AEADR=0x%08lX\n",
+		gd->arbiter_event_attributes, gd->arbiter_event_address);
+
+	return gd->arbiter_event_address;
+}
+#endif /* CONFIG_DISPLAY_AER_xxxx */
+
+/*
  * Figure out the cause of the reset
  */
 int prt_83xx_rsr(void)
@@ -334,6 +462,12 @@ int prt_83xx_rsr(void)
 			printf("%s%s", sep, bits[i].desc);
 			sep = ", ";
 		}
-	puts("\n\n");
+	puts("\n");
+
+#if defined(CONFIG_DISPLAY_AER_FULL) || defined(CONFIG_DISPLAY_AER_BRIEF)
+	print_83xx_arb_event(rsr & RSR_BMRS);
+#endif
+	puts("\n");
+
 	return 0;
 }
diff --git a/cpu/mpc83xx/ecc.c b/cpu/mpc83xx/ecc.c
index 5137ab6fd..5ab169fe3 100644
--- a/cpu/mpc83xx/ecc.c
+++ b/cpu/mpc83xx/ecc.c
@@ -20,7 +20,7 @@
 #if defined(CONFIG_DDR_ECC) && defined(CONFIG_DDR_ECC_CMD)
 void ecc_print_status(void)
 {
-	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
 	volatile ddr83xx_t *ddr = &immap->ddr;
 
 	printf("\nECC mode: %s\n\n",
@@ -100,7 +100,7 @@ void ecc_print_status(void)
 
 int do_ecc(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
 {
-	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
 	volatile ddr83xx_t *ddr = &immap->ddr;
 	volatile u32 val;
 	u64 *addr;
diff --git a/cpu/mpc83xx/fdt.c b/cpu/mpc83xx/fdt.c
index 39bd9dc7d..f89077588 100644
--- a/cpu/mpc83xx/fdt.c
+++ b/cpu/mpc83xx/fdt.c
@@ -34,7 +34,7 @@ DECLARE_GLOBAL_DATA_PTR;
 
 void ft_cpu_setup(void *blob, bd_t *bd)
 {
-	immap_t *immr = (immap_t *)CFG_IMMR;
+	immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
 	int spridr = immr->sysconf.spridr;
 
 	/*
@@ -52,7 +52,8 @@ void ft_cpu_setup(void *blob, bd_t *bd)
 		fdt_fixup_crypto_node(blob, 0x0204);
 
 #if defined(CONFIG_HAS_ETH0) || defined(CONFIG_HAS_ETH1) ||\
-    defined(CONFIG_HAS_ETH2) || defined(CONFIG_HAS_ETH3)
+    defined(CONFIG_HAS_ETH2) || defined(CONFIG_HAS_ETH3) ||\
+    defined(CONFIG_HAS_ETH4) || defined(CONFIG_HAS_ETH5)
 	fdt_fixup_ethernet(blob);
 #endif
 
@@ -76,9 +77,9 @@ void ft_cpu_setup(void *blob, bd_t *bd)
 	ft_qe_setup(blob);
 #endif
 
-#ifdef CFG_NS16550
+#ifdef CONFIG_SYS_NS16550
 	do_fixup_by_compat_u32(blob, "ns16550",
-		"clock-frequency", CFG_NS16550_CLK, 1);
+		"clock-frequency", CONFIG_SYS_NS16550_CLK, 1);
 #endif
 
 	fdt_fixup_memory(blob, (u64)bd->bi_memstart, (u64)bd->bi_memsize);
diff --git a/cpu/mpc83xx/interrupts.c b/cpu/mpc83xx/interrupts.c
index 98ed21ccf..faffbaf83 100644
--- a/cpu/mpc83xx/interrupts.c
+++ b/cpu/mpc83xx/interrupts.c
@@ -38,9 +38,9 @@ struct irq_action {
 
 int interrupt_init_cpu (unsigned *decrementer_count)
 {
-	volatile immap_t *immr = (immap_t *) CFG_IMMR;
+	volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
 
-	*decrementer_count = (gd->bus_clk / 4) / CFG_HZ;
+	*decrementer_count = (gd->bus_clk / 4) / CONFIG_SYS_HZ;
 
 	/* Enable e300 time base */
 
diff --git a/cpu/mpc83xx/nand_init.c b/cpu/mpc83xx/nand_init.c
index e92f23023..38e141a82 100644
--- a/cpu/mpc83xx/nand_init.c
+++ b/cpu/mpc83xx/nand_init.c
@@ -37,7 +37,7 @@ void cpu_init_f (volatile immap_t * im)
 	int i;
 
 	/* Pointer is writable since we allocated a register for it */
-	gd = (gd_t *) (CFG_INIT_RAM_ADDR + CFG_GBL_DATA_OFFSET);
+	gd = (gd_t *) (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET);
 
 	/* Clear initial global data */
 	for (i = 0; i < sizeof(gd_t); i++)
@@ -45,34 +45,34 @@ void cpu_init_f (volatile immap_t * im)
 
 	/* system performance tweaking */
 
-#ifdef CFG_ACR_PIPE_DEP
+#ifdef CONFIG_SYS_ACR_PIPE_DEP
 	/* Arbiter pipeline depth */
 	im->arbiter.acr = (im->arbiter.acr & ~ACR_PIPE_DEP) |
-			  (CFG_ACR_PIPE_DEP << ACR_PIPE_DEP_SHIFT);
+			  (CONFIG_SYS_ACR_PIPE_DEP << ACR_PIPE_DEP_SHIFT);
 #endif
 
-#ifdef CFG_ACR_RPTCNT
+#ifdef CONFIG_SYS_ACR_RPTCNT
 	/* Arbiter repeat count */
 	im->arbiter.acr = (im->arbiter.acr & ~(ACR_RPTCNT)) |
-			  (CFG_ACR_RPTCNT << ACR_RPTCNT_SHIFT);
+			  (CONFIG_SYS_ACR_RPTCNT << ACR_RPTCNT_SHIFT);
 #endif
 
-#ifdef CFG_SPCR_OPT
+#ifdef CONFIG_SYS_SPCR_OPT
 	/* Optimize transactions between CSB and other devices */
 	im->sysconf.spcr = (im->sysconf.spcr & ~SPCR_OPT) |
-			   (CFG_SPCR_OPT << SPCR_OPT_SHIFT);
+			   (CONFIG_SYS_SPCR_OPT << SPCR_OPT_SHIFT);
 #endif
 
 	/* Enable Time Base & Decrimenter (so we will have udelay()) */
 	im->sysconf.spcr |= SPCR_TBEN;
 
 	/* DDR control driver register */
-#ifdef CFG_DDRCDR
-	im->sysconf.ddrcdr = CFG_DDRCDR;
+#ifdef CONFIG_SYS_DDRCDR
+	im->sysconf.ddrcdr = CONFIG_SYS_DDRCDR;
 #endif
 	/* Output buffer impedance register */
-#ifdef CFG_OBIR
-	im->sysconf.obir = CFG_OBIR;
+#ifdef CONFIG_SYS_OBIR
+	im->sysconf.obir = CONFIG_SYS_OBIR;
 #endif
 
 	/*
@@ -84,16 +84,16 @@ void cpu_init_f (volatile immap_t * im)
 	 * has been determined
 	 */
 
-#if defined(CFG_NAND_BR_PRELIM)  \
-	&& defined(CFG_NAND_OR_PRELIM) \
-	&& defined(CFG_NAND_LBLAWBAR_PRELIM) \
-	&& defined(CFG_NAND_LBLAWAR_PRELIM)
-	im->lbus.bank[0].br = CFG_NAND_BR_PRELIM;
-	im->lbus.bank[0].or = CFG_NAND_OR_PRELIM;
-	im->sysconf.lblaw[0].bar = CFG_NAND_LBLAWBAR_PRELIM;
-	im->sysconf.lblaw[0].ar = CFG_NAND_LBLAWAR_PRELIM;
+#if defined(CONFIG_SYS_NAND_BR_PRELIM)  \
+	&& defined(CONFIG_SYS_NAND_OR_PRELIM) \
+	&& defined(CONFIG_SYS_NAND_LBLAWBAR_PRELIM) \
+	&& defined(CONFIG_SYS_NAND_LBLAWAR_PRELIM)
+	im->lbus.bank[0].br = CONFIG_SYS_NAND_BR_PRELIM;
+	im->lbus.bank[0].or = CONFIG_SYS_NAND_OR_PRELIM;
+	im->sysconf.lblaw[0].bar = CONFIG_SYS_NAND_LBLAWBAR_PRELIM;
+	im->sysconf.lblaw[0].ar = CONFIG_SYS_NAND_LBLAWAR_PRELIM;
 #else
-#error CFG_NAND_BR_PRELIM, CFG_NAND_OR_PRELIM, CFG_NAND_LBLAWBAR_PRELIM & CFG_NAND_LBLAWAR_PRELIM must be defined
+#error CONFIG_SYS_NAND_BR_PRELIM, CONFIG_SYS_NAND_OR_PRELIM, CONFIG_SYS_NAND_LBLAWBAR_PRELIM & CONFIG_SYS_NAND_LBLAWAR_PRELIM must be defined
 #endif
 }
 
diff --git a/cpu/mpc83xx/pci.c b/cpu/mpc83xx/pci.c
index c3ec5f87e..ab0760bce 100644
--- a/cpu/mpc83xx/pci.c
+++ b/cpu/mpc83xx/pci.c
@@ -42,7 +42,7 @@ static int pci_num_buses;
 
 static void pci_init_bus(int bus, struct pci_region *reg)
 {
-	volatile immap_t *immr = (volatile immap_t *)CFG_IMMR;
+	volatile immap_t *immr = (volatile immap_t *)CONFIG_SYS_IMMR;
 	volatile pot83xx_t *pot = immr->ios.pot;
 	volatile pcictrl83xx_t *pci_ctrl = &immr->pci_ctrl[bus];
 	struct pci_controller *hose = &pci_hose[bus];
@@ -83,7 +83,7 @@ static void pci_init_bus(int bus, struct pci_region *reg)
 	pci_ctrl->pibar1 = 0;
 	pci_ctrl->piebar1 = 0;
 	pci_ctrl->piwar1 = PIWAR_EN | PIWAR_PF | PIWAR_RTT_SNOOP |
-	                   PIWAR_WTT_SNOOP | (__ilog2(gd->ram_size) - 1);
+	                   PIWAR_WTT_SNOOP | (__ilog2(gd->ram_size - 1));
 
 	i = hose->region_count++;
 	hose->regions[i].bus_start = 0;
@@ -94,8 +94,8 @@ static void pci_init_bus(int bus, struct pci_region *reg)
 	hose->first_busno = 0;
 	hose->last_busno = 0xff;
 
-	pci_setup_indirect(hose, CFG_IMMR + 0x8300 + bus * 0x80,
-	                         CFG_IMMR + 0x8304 + bus * 0x80);
+	pci_setup_indirect(hose, CONFIG_SYS_IMMR + 0x8300 + bus * 0x80,
+	                         CONFIG_SYS_IMMR + 0x8304 + bus * 0x80);
 
 	pci_register_hose(hose);
 
@@ -133,7 +133,7 @@ static void pci_init_bus(int bus, struct pci_region *reg)
  */
 void mpc83xx_pci_init(int num_buses, struct pci_region **reg, int warmboot)
 {
-	volatile immap_t *immr = (volatile immap_t *)CFG_IMMR;
+	volatile immap_t *immr = (volatile immap_t *)CONFIG_SYS_IMMR;
 	int i;
 
 	if (num_buses > MAX_BUSES) {
diff --git a/cpu/mpc83xx/qe_io.c b/cpu/mpc83xx/qe_io.c
index ce91a07d7..db94f0009 100644
--- a/cpu/mpc83xx/qe_io.c
+++ b/cpu/mpc83xx/qe_io.c
@@ -33,7 +33,7 @@ void qe_config_iopin(u8 port, u8 pin, int dir, int open_drain, int assign)
 	u32			pin_2bit_assign;
 	u32			pin_1bit_mask;
 	u32			tmp_val;
-	volatile immap_t	*im = (volatile immap_t *)CFG_IMMR;
+	volatile immap_t	*im = (volatile immap_t *)CONFIG_SYS_IMMR;
 	volatile qepio83xx_t	*par_io = (volatile qepio83xx_t *)&im->qepio;
 
 	/* Caculate pin location and 2bit mask and dir */
diff --git a/cpu/mpc83xx/serdes.c b/cpu/mpc83xx/serdes.c
index 020c4c8f9..393679654 100644
--- a/cpu/mpc83xx/serdes.c
+++ b/cpu/mpc83xx/serdes.c
@@ -42,9 +42,9 @@
 #define FSL_SRDSRSTCTL_RST		0x80000000
 #define FSL_SRDSRSTCTL_SATA_RESET	0xf
 
-void fsl_setup_serdes(u32 offset, char proto, char rfcks, char vdd)
+void fsl_setup_serdes(u32 offset, char proto, u32 rfcks, char vdd)
 {
-	void *regs = (void *)CFG_IMMR + offset;
+	void *regs = (void *)CONFIG_SYS_IMMR + offset;
 	u32 tmp;
 
 	/* 1.0V corevdd */
diff --git a/cpu/mpc83xx/spd_sdram.c b/cpu/mpc83xx/spd_sdram.c
index 76f247449..42a4e675d 100644
--- a/cpu/mpc83xx/spd_sdram.c
+++ b/cpu/mpc83xx/spd_sdram.c
@@ -38,7 +38,7 @@ DECLARE_GLOBAL_DATA_PTR;
 
 void board_add_ram_info(int use_default)
 {
-	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
 	volatile ddr83xx_t *ddr = &immap->ddr;
 	char buf[32];
 
@@ -57,9 +57,9 @@ void board_add_ram_info(int use_default)
 
 	printf(", %s MHz)", strmhz(buf, gd->mem_clk));
 
-#if defined(CFG_LB_SDRAM) && defined(CFG_LBC_SDRAM_SIZE)
+#if defined(CONFIG_SYS_LB_SDRAM) && defined(CONFIG_SYS_LBC_SDRAM_SIZE)
 	puts("\nSDRAM: ");
-	print_size (CFG_LBC_SDRAM_SIZE * 1024 * 1024, " (local bus)");
+	print_size (CONFIG_SYS_LBC_SDRAM_SIZE * 1024 * 1024, " (local bus)");
 #endif
 }
 
@@ -71,8 +71,8 @@ extern uint dma_check(void);
 extern int dma_xfer(void *dest, uint count, void *src);
 #endif
 
-#ifndef	CFG_READ_SPD
-#define CFG_READ_SPD	i2c_read
+#ifndef	CONFIG_SYS_READ_SPD
+#define CONFIG_SYS_READ_SPD	i2c_read
 #endif
 
 /*
@@ -129,7 +129,7 @@ static void spd_debug(spd_eeprom_t *spd)
 
 long int spd_sdram()
 {
-	volatile immap_t *immap = (immap_t *)CFG_IMMR;
+	volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR;
 	volatile ddr83xx_t *ddr = &immap->ddr;
 	volatile law83xx_t *ecm = &immap->sysconf.ddrlaw[0];
 	spd_eeprom_t spd;
@@ -158,7 +158,7 @@ long int spd_sdram()
 	unsigned int pvr = get_pvr();
 
 	/* Read SPD parameters with I2C */
-	CFG_READ_SPD(SPD_EEPROM_ADDRESS, 0, 1, (uchar *) & spd, sizeof (spd));
+	CONFIG_SYS_READ_SPD(SPD_EEPROM_ADDRESS, 0, 1, (uchar *) & spd, sizeof (spd));
 #ifdef SPD_DEBUG
 	spd_debug(&spd);
 #endif
@@ -194,12 +194,12 @@ long int spd_sdram()
 		return 0;
 	}
 
-#ifdef CFG_DDRCDR_VALUE
+#ifdef CONFIG_SYS_DDRCDR_VALUE
 	/*
 	 * Adjust DDR II IO voltage biasing.  It just makes it work.
 	 */
 	if(spd.mem_type == SPD_MEMTYPE_DDR2) {
-		immap->sysconf.ddrcdr = CFG_DDRCDR_VALUE;
+		immap->sysconf.ddrcdr = CONFIG_SYS_DDRCDR_VALUE;
 	}
 	udelay(50000);
 #endif
@@ -214,7 +214,7 @@ long int spd_sdram()
 	}
 
 	/* Setup DDR chip select register */
-#ifdef CFG_83XX_DDR_USES_CS0
+#ifdef CONFIG_SYS_83XX_DDR_USES_CS0
 	ddr->csbnds[0].csbnds = (banksize(spd.row_dens) >> 24) - 1;
 	ddr->cs_config[0] = ( 1 << 31
 			    | (odt_rd_cfg << 20)
@@ -274,7 +274,7 @@ long int spd_sdram()
 	/*
 	 * Set up LAWBAR for all of DDR.
 	 */
-	ecm->bar = ((CFG_DDR_SDRAM_BASE>>12) & 0xfffff);
+	ecm->bar = CONFIG_SYS_DDR_SDRAM_BASE & 0xfffff000;
 	ecm->ar  = (LAWAR_EN | LAWAR_TRGT_IF_DDR | (LAWAR_SIZE & law_size));
 	debug("DDR:bar=0x%08x\n", ecm->bar);
 	debug("DDR:ar=0x%08x\n", ecm->ar);
@@ -314,7 +314,7 @@ long int spd_sdram()
 			+ (spd.clk_cycle & 0x0f));
 	max_data_rate = max_bus_clk * 2;
 
-	debug("DDR:Module maximum data rate is: %dMhz\n", max_data_rate);
+	debug("DDR:Module maximum data rate is: %d MHz\n", max_data_rate);
 
 	ddrc_clk = gd->mem_clk / 1000000;
 	effective_data_rate = 0;
@@ -401,7 +401,7 @@ long int spd_sdram()
 		}
 	}
 
-	debug("DDR:Effective data rate is: %dMhz\n", effective_data_rate);
+	debug("DDR:Effective data rate is: %dMHz\n", effective_data_rate);
 	debug("DDR:The MSB 1 of CAS Latency is: %d\n", caslat);
 
 	/*
@@ -724,8 +724,8 @@ long int spd_sdram()
 		debug("DDR: sdram_cfg2  = 0x%08x\n", ddr->sdram_cfg2);
 	}
 
-#ifdef CFG_DDR_SDRAM_CLK_CNTL	/* Optional platform specific value */
-	ddr->sdram_clk_cntl = CFG_DDR_SDRAM_CLK_CNTL;
+#ifdef CONFIG_SYS_DDR_SDRAM_CLK_CNTL	/* Optional platform specific value */
+	ddr->sdram_clk_cntl = CONFIG_SYS_DDR_SDRAM_CLK_CNTL;
 #endif
 	debug("DDR:sdram_clk_cntl=0x%08x\n", ddr->sdram_clk_cntl);
 
@@ -842,7 +842,7 @@ static __inline__ unsigned long get_tbms (void)
 /* #define CONFIG_DDR_ECC_INIT_VIA_DMA */
 void ddr_enable_ecc(unsigned int dram_size)
 {
-	volatile immap_t *immap = (immap_t *)CFG_IMMR;
+	volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR;
 	volatile ddr83xx_t *ddr= &immap->ddr;
 	unsigned long t_start, t_end;
 	register u64 *p;
diff --git a/cpu/mpc83xx/speed.c b/cpu/mpc83xx/speed.c
index 76c569de1..bf9bf36e5 100644
--- a/cpu/mpc83xx/speed.c
+++ b/cpu/mpc83xx/speed.c
@@ -90,7 +90,7 @@ corecnf_t corecnf_tab[] = {
  */
 int get_clocks(void)
 {
-	volatile immap_t *im = (immap_t *) CFG_IMMR;
+	volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR;
 	u32 pci_sync_in;
 	u8 spmf;
 	u8 clkin_div;
@@ -499,44 +499,46 @@ ulong get_bus_freq(ulong dummy)
 
 int do_clocks (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
 {
+	char buf[32];
+
 	printf("Clock configuration:\n");
-	printf("  Core:                %4d MHz\n", gd->core_clk / 1000000);
-	printf("  Coherent System Bus: %4d MHz\n", gd->csb_clk / 1000000);
+	printf("  Core:                %-4s MHz\n", strmhz(buf, gd->core_clk));
+	printf("  Coherent System Bus: %-4s MHz\n", strmhz(buf, gd->csb_clk));
 #if defined(CONFIG_MPC8360) || defined(CONFIG_MPC832X)
-	printf("  QE:                  %4d MHz\n", gd->qe_clk / 1000000);
-	printf("  BRG:                 %4d MHz\n", gd->brg_clk / 1000000);
+	printf("  QE:                  %-4s MHz\n", strmhz(buf, gd->qe_clk));
+	printf("  BRG:                 %-4s MHz\n", strmhz(buf, gd->brg_clk));
 #endif
-	printf("  Local Bus Controller:%4d MHz\n", gd->lbiu_clk / 1000000);
-	printf("  Local Bus:           %4d MHz\n", gd->lclk_clk / 1000000);
-	printf("  DDR:                 %4ld MHz\n", gd->mem_clk / 1000000);
+	printf("  Local Bus Controller:%-4s MHz\n", strmhz(buf, gd->lbiu_clk));
+	printf("  Local Bus:           %-4s MHz\n", strmhz(buf, gd->lclk_clk));
+	printf("  DDR:                 %-4s MHz\n", strmhz(buf, gd->mem_clk));
 #if defined(CONFIG_MPC8360)
-	printf("  DDR Secondary:       %4d MHz\n", gd->mem_sec_clk / 1000000);
+	printf("  DDR Secondary:       %-4s MHz\n", strmhz(buf, gd->mem_sec_clk));
 #endif
-	printf("  SEC:                 %4d MHz\n", gd->enc_clk / 1000000);
-	printf("  I2C1:                %4d MHz\n", gd->i2c1_clk / 1000000);
+	printf("  SEC:                 %-4s MHz\n", strmhz(buf, gd->enc_clk));
+	printf("  I2C1:                %-4s MHz\n", strmhz(buf, gd->i2c1_clk));
 #if !defined(CONFIG_MPC832X)
-	printf("  I2C2:                %4d MHz\n", gd->i2c2_clk / 1000000);
+	printf("  I2C2:                %-4s MHz\n", strmhz(buf, gd->i2c2_clk));
 #endif
 #if defined(CONFIG_MPC8315)
-	printf("  TDM:                 %4d MHz\n", gd->tdm_clk / 1000000);
+	printf("  TDM:                 %-4s MHz\n", strmhz(buf, gd->tdm_clk));
 #endif
 #if defined(CONFIG_MPC837X)
-	printf("  SDHC:                %4d MHz\n", gd->sdhc_clk / 1000000);
+	printf("  SDHC:                %-4s MHz\n", strmhz(buf, gd->sdhc_clk));
 #endif
 #if defined(CONFIG_MPC834X) || defined(CONFIG_MPC831X) || defined(CONFIG_MPC837X)
-	printf("  TSEC1:               %4d MHz\n", gd->tsec1_clk / 1000000);
-	printf("  TSEC2:               %4d MHz\n", gd->tsec2_clk / 1000000);
-	printf("  USB DR:              %4d MHz\n", gd->usbdr_clk / 1000000);
+	printf("  TSEC1:               %-4s MHz\n", strmhz(buf, gd->tsec1_clk));
+	printf("  TSEC2:               %-4s MHz\n", strmhz(buf, gd->tsec2_clk));
+	printf("  USB DR:              %-4s MHz\n", strmhz(buf, gd->usbdr_clk));
 #endif
 #if defined(CONFIG_MPC834X)
-	printf("  USB MPH:             %4d MHz\n", gd->usbmph_clk / 1000000);
+	printf("  USB MPH:             %-4s MHz\n", strmhz(buf, gd->usbmph_clk));
 #endif
 #if defined(CONFIG_MPC837X)
-	printf("  PCIEXP1:             %4d MHz\n", gd->pciexp1_clk / 1000000);
-	printf("  PCIEXP2:             %4d MHz\n", gd->pciexp2_clk / 1000000);
+	printf("  PCIEXP1:             %-4s MHz\n", strmhz(buf, gd->pciexp1_clk));
+	printf("  PCIEXP2:             %-4s MHz\n", strmhz(buf, gd->pciexp2_clk));
 #endif
 #if defined(CONFIG_MPC837X) || defined(CONFIG_MPC8315)
-	printf("  SATA:                %4d MHz\n", gd->sata_clk / 1000000);
+	printf("  SATA:                %-4s MHz\n", strmhz(buf, gd->sata_clk));
 #endif
 	return 0;
 }
diff --git a/cpu/mpc83xx/start.S b/cpu/mpc83xx/start.S
index 16ed494f8..792b2c8b2 100644
--- a/cpu/mpc83xx/start.S
+++ b/cpu/mpc83xx/start.S
@@ -29,6 +29,7 @@
 
 #include <config.h>
 #include <mpc83xx.h>
+#include <timestamp.h>
 #include <version.h>
 
 #define CONFIG_83XX	1		/* needed for Linux kernel header files*/
@@ -57,8 +58,8 @@
 #define MSR_KERNEL (MSR_FP|MSR_ME|MSR_RI)
 #endif
 
-#if !defined(CONFIG_NAND_SPL) && !defined(CFG_RAMBOOT)
-#define CFG_FLASHBOOT
+#if !defined(CONFIG_NAND_SPL) && !defined(CONFIG_SYS_RAMBOOT)
+#define CONFIG_SYS_FLASHBOOT
 #endif
 
 /*
@@ -93,8 +94,8 @@
 	.fill	8,1,(((w)>> 8)&0xff);	\
 	.fill	8,1,(((w)    )&0xff)
 
-	_HRCW_TABLE_ENTRY(CFG_HRCW_LOW)
-	_HRCW_TABLE_ENTRY(CFG_HRCW_HIGH)
+	_HRCW_TABLE_ENTRY(CONFIG_SYS_HRCW_LOW)
+	_HRCW_TABLE_ENTRY(CONFIG_SYS_HRCW_HIGH)
 
 /*
  * Magic number and version string - put it after the HRCW since it
@@ -105,16 +106,16 @@
 	.globl	version_string
 version_string:
 	.ascii U_BOOT_VERSION
-	.ascii " (", __DATE__, " - ", __TIME__, ")"
+	.ascii " (", U_BOOT_DATE, " - ", U_BOOT_TIME, ")"
 	.ascii " ", CONFIG_IDENT_STRING, "\0"
 
 
 #ifndef CONFIG_DEFAULT_IMMR
 #error CONFIG_DEFAULT_IMMR must be defined
-#endif /* CFG_DEFAULT_IMMR */
-#ifndef CFG_IMMR
-#define CFG_IMMR CONFIG_DEFAULT_IMMR
-#endif /* CFG_IMMR */
+#endif /* CONFIG_SYS_DEFAULT_IMMR */
+#ifndef CONFIG_SYS_IMMR
+#define CONFIG_SYS_IMMR CONFIG_DEFAULT_IMMR
+#endif /* CONFIG_SYS_IMMR */
 
 /*
  * After configuration, a system reset exception is executed using the
@@ -160,24 +161,36 @@ boot_cold: /* time t 3 */
 	nop
 boot_warm: /* time t 5 */
 	mfmsr	r5			/* save msr contents	*/
-	lis	r3, CFG_IMMR@h
-	ori	r3, r3, CFG_IMMR@l
+	lis	r3, CONFIG_SYS_IMMR@h
+	ori	r3, r3, CONFIG_SYS_IMMR@l
 	stw	r3, IMMRBAR(r4)
 
 	/* Initialise the E300 processor core		*/
 	/*------------------------------------------*/
 
+#ifdef CONFIG_NAND_SPL
+	/* The FCM begins execution after only the first page
+	 * is loaded.  Wait for the rest before branching
+	 * to another flash page.
+	 */
+	addi	r7, r3, 0x50b0
+1:	dcbi	0, r7
+	lwz	r6, 0(r7)
+	andi.	r6, r6, 1
+	beq	1b
+#endif
+
 	bl	init_e300_core
 
-#ifdef CFG_FLASHBOOT
+#ifdef CONFIG_SYS_FLASHBOOT
 
 	/* Inflate flash location so it appears everywhere, calculate */
 	/* the absolute address in final location of the FLASH, jump  */
 	/* there and deflate the flash size back to minimal size      */
 	/*------------------------------------------------------------*/
 	bl map_flash_by_law1
-	lis r4, (CFG_MONITOR_BASE)@h
-	ori r4, r4, (CFG_MONITOR_BASE)@l
+	lis r4, (CONFIG_SYS_MONITOR_BASE)@h
+	ori r4, r4, (CONFIG_SYS_MONITOR_BASE)@l
 	addi r5, r4, in_flash - _start + EXC_OFF_SYS_RESET
 	mtlr r5
 	blr
@@ -185,7 +198,7 @@ in_flash:
 #if 1 /* Remapping flash with LAW0. */
 	bl remap_flash_by_law0
 #endif
-#endif	/* CFG_FLASHBOOT */
+#endif	/* CONFIG_SYS_FLASHBOOT */
 
 	/* setup the bats */
 	bl	setup_bats
@@ -208,18 +221,18 @@ in_flash:
 	bl	enable_addr_trans
 	sync
 
-	/* enable and invalidate the data cache */
+	/* enable the data cache */
 	bl	dcache_enable
 	sync
-#ifdef CFG_INIT_RAM_LOCK
+#ifdef CONFIG_SYS_INIT_RAM_LOCK
 	bl	lock_ram_in_cache
 	sync
 #endif
 
 	/* set up the stack pointer in our newly created
 	 * cache-ram (r1) */
-	lis	r1, (CFG_INIT_RAM_ADDR + CFG_GBL_DATA_OFFSET)@h
-	ori	r1, r1, (CFG_INIT_RAM_ADDR + CFG_GBL_DATA_OFFSET)@l
+	lis	r1, (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET)@h
+	ori	r1, r1, (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET)@l
 
 	li	r0, 0		/* Make room for stack frame header and	*/
 	stwu	r0, -4(r1)	/* clear final stack frame so that	*/
@@ -234,7 +247,7 @@ in_flash:
 	GET_GOT			/* initialize GOT access	*/
 
 	/* r3: IMMR */
-	lis	r3, CFG_IMMR@h
+	lis	r3, CONFIG_SYS_IMMR@h
 	/* run low-level CPU init code (in Flash)*/
 	bl	cpu_init_f
 
@@ -456,11 +469,11 @@ init_e300_core: /* time t 10 */
 	mtspr	SRR1, r3			/* Make SRR1 match MSR */
 
 
-	lis	r3, CFG_IMMR@h
+	lis	r3, CONFIG_SYS_IMMR@h
 #if defined(CONFIG_WATCHDOG)
 	/* Initialise the Wathcdog values and reset it (if req) */
 	/*------------------------------------------------------*/
-	lis r4, CFG_WATCHDOG_VALUE
+	lis r4, CONFIG_SYS_WATCHDOG_VALUE
 	ori r4, r4, (SWCRR_SWEN | SWCRR_SWRI | SWCRR_SWPR)
 	stw r4, SWCRR(r3)
 
@@ -483,22 +496,34 @@ init_e300_core: /* time t 10 */
 1:
 #endif /* CONFIG_WATCHDOG */
 
+#if defined(CONFIG_MASK_AER_AO)
+	/* Write the Arbiter Event Enable to mask Address Only traps. */
+	/* This prevents the dcbz instruction from being trapped when */
+	/* HID0_ABE Address Broadcast Enable is set and the MEMORY    */
+	/* COHERENCY bit is set in the WIMG bits, which is often      */
+	/* needed for PCI operation.                                  */
+	lwz	r4, 0x0808(r3)
+	rlwinm	r0, r4, 0, ~AER_AO
+	stw	r0, 0x0808(r3)
+#endif /* CONFIG_MASK_AER_AO */
+
 	/* Initialize the Hardware Implementation-dependent Registers */
 	/* HID0 also contains cache control			*/
+	/* - force invalidation of data and instruction caches  */
 	/*------------------------------------------------------*/
 
-	lis	r3, CFG_HID0_INIT@h
-	ori	r3, r3, CFG_HID0_INIT@l
+	lis	r3, CONFIG_SYS_HID0_INIT@h
+	ori	r3, r3, (CONFIG_SYS_HID0_INIT | HID0_ICFI | HID0_DCFI)@l
 	SYNC
 	mtspr	HID0, r3
 
-	lis	r3, CFG_HID0_FINAL@h
-	ori	r3, r3, CFG_HID0_FINAL@l
+	lis	r3, CONFIG_SYS_HID0_FINAL@h
+	ori	r3, r3, (CONFIG_SYS_HID0_FINAL & ~(HID0_ICFI | HID0_DCFI))@l
 	SYNC
 	mtspr	HID0, r3
 
-	lis	r3, CFG_HID2@h
-	ori	r3, r3, CFG_HID2@l
+	lis	r3, CONFIG_SYS_HID2@h
+	ori	r3, r3, CONFIG_SYS_HID2@l
 	SYNC
 	mtspr	HID2, r3
 
@@ -512,131 +537,131 @@ setup_bats:
 	addis	r0, r0, 0x0000
 
 	/* IBAT 0 */
-	addis	r4, r0, CFG_IBAT0L@h
-	ori	r4, r4, CFG_IBAT0L@l
-	addis	r3, r0, CFG_IBAT0U@h
-	ori	r3, r3, CFG_IBAT0U@l
+	addis	r4, r0, CONFIG_SYS_IBAT0L@h
+	ori	r4, r4, CONFIG_SYS_IBAT0L@l
+	addis	r3, r0, CONFIG_SYS_IBAT0U@h
+	ori	r3, r3, CONFIG_SYS_IBAT0U@l
 	mtspr	IBAT0L, r4
 	mtspr	IBAT0U, r3
 
 	/* DBAT 0 */
-	addis	r4, r0, CFG_DBAT0L@h
-	ori	r4, r4, CFG_DBAT0L@l
-	addis	r3, r0, CFG_DBAT0U@h
-	ori	r3, r3, CFG_DBAT0U@l
+	addis	r4, r0, CONFIG_SYS_DBAT0L@h
+	ori	r4, r4, CONFIG_SYS_DBAT0L@l
+	addis	r3, r0, CONFIG_SYS_DBAT0U@h
+	ori	r3, r3, CONFIG_SYS_DBAT0U@l
 	mtspr	DBAT0L, r4
 	mtspr	DBAT0U, r3
 
 	/* IBAT 1 */
-	addis	r4, r0, CFG_IBAT1L@h
-	ori	r4, r4, CFG_IBAT1L@l
-	addis	r3, r0, CFG_IBAT1U@h
-	ori	r3, r3, CFG_IBAT1U@l
+	addis	r4, r0, CONFIG_SYS_IBAT1L@h
+	ori	r4, r4, CONFIG_SYS_IBAT1L@l
+	addis	r3, r0, CONFIG_SYS_IBAT1U@h
+	ori	r3, r3, CONFIG_SYS_IBAT1U@l
 	mtspr	IBAT1L, r4
 	mtspr	IBAT1U, r3
 
 	/* DBAT 1 */
-	addis	r4, r0, CFG_DBAT1L@h
-	ori	r4, r4, CFG_DBAT1L@l
-	addis	r3, r0, CFG_DBAT1U@h
-	ori	r3, r3, CFG_DBAT1U@l
+	addis	r4, r0, CONFIG_SYS_DBAT1L@h
+	ori	r4, r4, CONFIG_SYS_DBAT1L@l
+	addis	r3, r0, CONFIG_SYS_DBAT1U@h
+	ori	r3, r3, CONFIG_SYS_DBAT1U@l
 	mtspr	DBAT1L, r4
 	mtspr	DBAT1U, r3
 
 	/* IBAT 2 */
-	addis	r4, r0, CFG_IBAT2L@h
-	ori	r4, r4, CFG_IBAT2L@l
-	addis	r3, r0, CFG_IBAT2U@h
-	ori	r3, r3, CFG_IBAT2U@l
+	addis	r4, r0, CONFIG_SYS_IBAT2L@h
+	ori	r4, r4, CONFIG_SYS_IBAT2L@l
+	addis	r3, r0, CONFIG_SYS_IBAT2U@h
+	ori	r3, r3, CONFIG_SYS_IBAT2U@l
 	mtspr	IBAT2L, r4
 	mtspr	IBAT2U, r3
 
 	/* DBAT 2 */
-	addis	r4, r0, CFG_DBAT2L@h
-	ori	r4, r4, CFG_DBAT2L@l
-	addis	r3, r0, CFG_DBAT2U@h
-	ori	r3, r3, CFG_DBAT2U@l
+	addis	r4, r0, CONFIG_SYS_DBAT2L@h
+	ori	r4, r4, CONFIG_SYS_DBAT2L@l
+	addis	r3, r0, CONFIG_SYS_DBAT2U@h
+	ori	r3, r3, CONFIG_SYS_DBAT2U@l
 	mtspr	DBAT2L, r4
 	mtspr	DBAT2U, r3
 
 	/* IBAT 3 */
-	addis	r4, r0, CFG_IBAT3L@h
-	ori	r4, r4, CFG_IBAT3L@l
-	addis	r3, r0, CFG_IBAT3U@h
-	ori	r3, r3, CFG_IBAT3U@l
+	addis	r4, r0, CONFIG_SYS_IBAT3L@h
+	ori	r4, r4, CONFIG_SYS_IBAT3L@l
+	addis	r3, r0, CONFIG_SYS_IBAT3U@h
+	ori	r3, r3, CONFIG_SYS_IBAT3U@l
 	mtspr	IBAT3L, r4
 	mtspr	IBAT3U, r3
 
 	/* DBAT 3 */
-	addis	r4, r0, CFG_DBAT3L@h
-	ori	r4, r4, CFG_DBAT3L@l
-	addis	r3, r0, CFG_DBAT3U@h
-	ori	r3, r3, CFG_DBAT3U@l
+	addis	r4, r0, CONFIG_SYS_DBAT3L@h
+	ori	r4, r4, CONFIG_SYS_DBAT3L@l
+	addis	r3, r0, CONFIG_SYS_DBAT3U@h
+	ori	r3, r3, CONFIG_SYS_DBAT3U@l
 	mtspr	DBAT3L, r4
 	mtspr	DBAT3U, r3
 
 #ifdef CONFIG_HIGH_BATS
 	/* IBAT 4 */
-	addis   r4, r0, CFG_IBAT4L@h
-	ori     r4, r4, CFG_IBAT4L@l
-	addis   r3, r0, CFG_IBAT4U@h
-	ori     r3, r3, CFG_IBAT4U@l
+	addis   r4, r0, CONFIG_SYS_IBAT4L@h
+	ori     r4, r4, CONFIG_SYS_IBAT4L@l
+	addis   r3, r0, CONFIG_SYS_IBAT4U@h
+	ori     r3, r3, CONFIG_SYS_IBAT4U@l
 	mtspr   IBAT4L, r4
 	mtspr   IBAT4U, r3
 
 	/* DBAT 4 */
-	addis   r4, r0, CFG_DBAT4L@h
-	ori     r4, r4, CFG_DBAT4L@l
-	addis   r3, r0, CFG_DBAT4U@h
-	ori     r3, r3, CFG_DBAT4U@l
+	addis   r4, r0, CONFIG_SYS_DBAT4L@h
+	ori     r4, r4, CONFIG_SYS_DBAT4L@l
+	addis   r3, r0, CONFIG_SYS_DBAT4U@h
+	ori     r3, r3, CONFIG_SYS_DBAT4U@l
 	mtspr   DBAT4L, r4
 	mtspr   DBAT4U, r3
 
 	/* IBAT 5 */
-	addis   r4, r0, CFG_IBAT5L@h
-	ori     r4, r4, CFG_IBAT5L@l
-	addis   r3, r0, CFG_IBAT5U@h
-	ori     r3, r3, CFG_IBAT5U@l
+	addis   r4, r0, CONFIG_SYS_IBAT5L@h
+	ori     r4, r4, CONFIG_SYS_IBAT5L@l
+	addis   r3, r0, CONFIG_SYS_IBAT5U@h
+	ori     r3, r3, CONFIG_SYS_IBAT5U@l
 	mtspr   IBAT5L, r4
 	mtspr   IBAT5U, r3
 
 	/* DBAT 5 */
-	addis   r4, r0, CFG_DBAT5L@h
-	ori     r4, r4, CFG_DBAT5L@l
-	addis   r3, r0, CFG_DBAT5U@h
-	ori     r3, r3, CFG_DBAT5U@l
+	addis   r4, r0, CONFIG_SYS_DBAT5L@h
+	ori     r4, r4, CONFIG_SYS_DBAT5L@l
+	addis   r3, r0, CONFIG_SYS_DBAT5U@h
+	ori     r3, r3, CONFIG_SYS_DBAT5U@l
 	mtspr   DBAT5L, r4
 	mtspr   DBAT5U, r3
 
 	/* IBAT 6 */
-	addis   r4, r0, CFG_IBAT6L@h
-	ori     r4, r4, CFG_IBAT6L@l
-	addis   r3, r0, CFG_IBAT6U@h
-	ori     r3, r3, CFG_IBAT6U@l
+	addis   r4, r0, CONFIG_SYS_IBAT6L@h
+	ori     r4, r4, CONFIG_SYS_IBAT6L@l
+	addis   r3, r0, CONFIG_SYS_IBAT6U@h
+	ori     r3, r3, CONFIG_SYS_IBAT6U@l
 	mtspr   IBAT6L, r4
 	mtspr   IBAT6U, r3
 
 	/* DBAT 6 */
-	addis   r4, r0, CFG_DBAT6L@h
-	ori     r4, r4, CFG_DBAT6L@l
-	addis   r3, r0, CFG_DBAT6U@h
-	ori     r3, r3, CFG_DBAT6U@l
+	addis   r4, r0, CONFIG_SYS_DBAT6L@h
+	ori     r4, r4, CONFIG_SYS_DBAT6L@l
+	addis   r3, r0, CONFIG_SYS_DBAT6U@h
+	ori     r3, r3, CONFIG_SYS_DBAT6U@l
 	mtspr   DBAT6L, r4
 	mtspr   DBAT6U, r3
 
 	/* IBAT 7 */
-	addis   r4, r0, CFG_IBAT7L@h
-	ori     r4, r4, CFG_IBAT7L@l
-	addis   r3, r0, CFG_IBAT7U@h
-	ori     r3, r3, CFG_IBAT7U@l
+	addis   r4, r0, CONFIG_SYS_IBAT7L@h
+	ori     r4, r4, CONFIG_SYS_IBAT7L@l
+	addis   r3, r0, CONFIG_SYS_IBAT7U@h
+	ori     r3, r3, CONFIG_SYS_IBAT7U@l
 	mtspr   IBAT7L, r4
 	mtspr   IBAT7U, r3
 
 	/* DBAT 7 */
-	addis   r4, r0, CFG_DBAT7L@h
-	ori     r4, r4, CFG_DBAT7L@l
-	addis   r3, r0, CFG_DBAT7U@h
-	ori     r3, r3, CFG_DBAT7U@l
+	addis   r4, r0, CONFIG_SYS_DBAT7L@h
+	ori     r4, r4, CONFIG_SYS_DBAT7L@l
+	addis   r3, r0, CONFIG_SYS_DBAT7U@h
+	ori     r3, r3, CONFIG_SYS_DBAT7U@l
 	mtspr   DBAT7L, r4
 	mtspr   DBAT7U, r3
 #endif
@@ -703,8 +728,7 @@ disable_addr_trans:
 icache_enable:
 	mfspr	r3, HID0
 	ori	r3, r3, HID0_ICE
-	lis	r4, 0
-	ori	r4, r4, HID0_ILOCK
+	li	r4, HID0_ICFI|HID0_ILOCK
 	andc	r3, r3, r4
 	ori	r4, r3, HID0_ICFI
 	isync
@@ -717,13 +741,10 @@ icache_enable:
 icache_disable:
 	mfspr	r3, HID0
 	lis	r4, 0
-	ori	r4, r4, HID0_ICE|HID0_ILOCK
+	ori	r4, r4, HID0_ICE|HID0_ICFI|HID0_ILOCK
 	andc	r3, r3, r4
-	ori	r4, r3, HID0_ICFI
 	isync
-	mtspr	HID0, r4     /* sets invalidate, clears enable and lock*/
-	isync
-	mtspr	HID0, r3	/* clears invalidate */
+	mtspr	HID0, r3	/* clears invalidate, enable and lock */
 	blr
 
 	.globl	icache_status
@@ -737,25 +758,24 @@ dcache_enable:
 	mfspr	r3, HID0
 	li	r5, HID0_DCFI|HID0_DLOCK
 	andc	r3, r3, r5
-	mtspr	HID0, r3		/* no invalidate, unlock */
 	ori	r3, r3, HID0_DCE
-	ori	r5, r3, HID0_DCFI
-	mtspr	HID0, r5		/* enable + invalidate */
-	mtspr	HID0, r3		/* enable */
 	sync
+	mtspr	HID0, r3		/* enable, no invalidate */
 	blr
 
 	.globl	dcache_disable
 dcache_disable:
+	mflr	r4
+	bl	flush_dcache		/* uses r3 and r5 */
 	mfspr	r3, HID0
-	lis	r4, 0
-	ori	r4, r4, HID0_DCE|HID0_DLOCK
-	andc	r3, r3, r4
-	ori	r4, r3, HID0_DCI
+	li	r5, HID0_DCE|HID0_DLOCK
+	andc	r3, r3, r5
+	ori	r5, r3, HID0_DCFI
 	sync
-	mtspr	HID0, r4	/* sets invalidate, clears enable and lock */
+	mtspr	HID0, r5	/* sets invalidate, clears enable and lock */
 	sync
 	mtspr	HID0, r3	/* clears invalidate */
+	mtlr	r4
 	blr
 
 	.globl	dcache_status
@@ -764,6 +784,18 @@ dcache_status:
 	rlwinm	r3, r3, (31 - HID0_DCE_SHIFT + 1), 31, 31
 	blr
 
+	.globl	flush_dcache
+flush_dcache:
+	lis	r3, 0
+	lis	r5, CONFIG_SYS_CACHELINE_SIZE
+1:	cmp	0, 1, r3, r5
+	bge	2f
+	lwz	r5, 0(r3)
+	lis	r5, CONFIG_SYS_CACHELINE_SIZE
+	addi	r3, r3, 0x4
+	b	1b
+2:	blr
+
 	.globl get_pvr
 get_pvr:
 	mfspr	r3, PVR
@@ -801,16 +833,16 @@ relocate_code:
 	mr	r10, r5		/* Save copy of Destination Address */
 
 	mr	r3,  r5				/* Destination Address */
-	lis	r4, CFG_MONITOR_BASE@h		/* Source      Address */
-	ori	r4, r4, CFG_MONITOR_BASE@l
+	lis	r4, CONFIG_SYS_MONITOR_BASE@h		/* Source      Address */
+	ori	r4, r4, CONFIG_SYS_MONITOR_BASE@l
 	lwz	r5, GOT(__bss_start)
 	sub	r5, r5, r4
-	li	r6, CFG_CACHELINE_SIZE		/* Cache Line Size */
+	li	r6, CONFIG_SYS_CACHELINE_SIZE		/* Cache Line Size */
 
 	/*
 	 * Fix GOT pointer:
 	 *
-	 * New GOT-PTR = (old GOT-PTR - CFG_MONITOR_BASE)
+	 * New GOT-PTR = (old GOT-PTR - CONFIG_SYS_MONITOR_BASE)
 	 *		+ Destination Address
 	 *
 	 * Offset:
@@ -1054,15 +1086,15 @@ trap_reloc:
 	blr
 #endif /* !CONFIG_NAND_SPL */
 
-#ifdef CFG_INIT_RAM_LOCK
+#ifdef CONFIG_SYS_INIT_RAM_LOCK
 lock_ram_in_cache:
 	/* Allocate Initial RAM in data cache.
 	 */
-	lis	r3, (CFG_INIT_RAM_ADDR & ~31)@h
-	ori	r3, r3, (CFG_INIT_RAM_ADDR & ~31)@l
-	li	r2, ((CFG_INIT_RAM_END & ~31) + \
-		     (CFG_INIT_RAM_ADDR & 31) + 31) / 32
-	mtctr	r2
+	lis	r3, (CONFIG_SYS_INIT_RAM_ADDR & ~31)@h
+	ori	r3, r3, (CONFIG_SYS_INIT_RAM_ADDR & ~31)@l
+	li	r4, ((CONFIG_SYS_INIT_RAM_END & ~31) + \
+		     (CONFIG_SYS_INIT_RAM_ADDR & 31) + 31) / 32
+	mtctr	r4
 1:
 	dcbz	r0, r3
 	addi	r3, r3, 32
@@ -1070,7 +1102,7 @@ lock_ram_in_cache:
 
 	/* Lock the data cache */
 	mfspr	r0, HID0
-	ori	r0, r0, 0x1000
+	ori	r0, r0, HID0_DLOCK
 	sync
 	mtspr	HID0, r0
 	sync
@@ -1080,10 +1112,11 @@ lock_ram_in_cache:
 .globl unlock_ram_in_cache
 unlock_ram_in_cache:
 	/* invalidate the INIT_RAM section */
-	lis	r3, (CFG_INIT_RAM_ADDR & ~31)@h
-	ori	r3, r3, (CFG_INIT_RAM_ADDR & ~31)@l
-	li	r2,512
-	mtctr	r2
+	lis	r3, (CONFIG_SYS_INIT_RAM_ADDR & ~31)@h
+	ori	r3, r3, (CONFIG_SYS_INIT_RAM_ADDR & ~31)@l
+	li	r4, ((CONFIG_SYS_INIT_RAM_END & ~31) + \
+		     (CONFIG_SYS_INIT_RAM_ADDR & 31) + 31) / 32
+	mtctr	r4
 1:	icbi	r0, r3
 	dcbi	r0, r3
 	addi	r3, r3, 32
@@ -1096,19 +1129,20 @@ unlock_ram_in_cache:
 	li	r5, HID0_DLOCK|HID0_DCFI
 	andc	r3, r3, r5		/* no invalidate, unlock */
 	ori	r5, r3, HID0_DCFI	/* invalidate, unlock */
+	sync
 	mtspr	HID0, r5		/* invalidate, unlock */
-	mtspr	HID0, r3		/* no invalidate, unlock */
 	sync
+	mtspr	HID0, r3		/* no invalidate, unlock */
 	blr
 #endif /* !CONFIG_NAND_SPL */
-#endif /* CFG_INIT_RAM_LOCK */
+#endif /* CONFIG_SYS_INIT_RAM_LOCK */
 
-#ifdef CFG_FLASHBOOT
+#ifdef CONFIG_SYS_FLASHBOOT
 map_flash_by_law1:
 	/* When booting from ROM (Flash or EPROM), clear the  */
 	/* Address Mask in OR0 so ROM appears everywhere      */
 	/*----------------------------------------------------*/
-	lis	r3, (CFG_IMMR)@h  /* r3 <= CFG_IMMR    */
+	lis	r3, (CONFIG_SYS_IMMR)@h  /* r3 <= CONFIG_SYS_IMMR    */
 	lwz	r4, OR0@l(r3)
 	li	r5, 0x7fff        /* r5 <= 0x00007FFFF */
 	and	r4, r4, r5
@@ -1130,14 +1164,14 @@ map_flash_by_law1:
 	 * LBIU Local Access Widow 0 will not cover this memory space.  So, we
 	 * need another window to map in it.
 	 */
-	lis r4, (CFG_FLASH_BASE)@h
-	ori r4, r4, (CFG_FLASH_BASE)@l
-	stw r4, LBLAWBAR1(r3) /* LBLAWBAR1 <= CFG_FLASH_BASE */
+	lis r4, (CONFIG_SYS_FLASH_BASE)@h
+	ori r4, r4, (CONFIG_SYS_FLASH_BASE)@l
+	stw r4, LBLAWBAR1(r3) /* LBLAWBAR1 <= CONFIG_SYS_FLASH_BASE */
 
-	/* Store 0x80000012 + log2(CFG_FLASH_SIZE) into LBLAWAR1 */
+	/* Store 0x80000012 + log2(CONFIG_SYS_FLASH_SIZE) into LBLAWAR1 */
 	lis r4, (0x80000012)@h
 	ori r4, r4, (0x80000012)@l
-	li r5, CFG_FLASH_SIZE
+	li r5, CONFIG_SYS_FLASH_SIZE
 1:	srawi. r5, r5, 1	/* r5 = r5 >> 1 */
 	addi r4, r4, 1
 	bne 1b
@@ -1154,24 +1188,24 @@ remap_flash_by_law0:
 	lwz r4, BR0(r3)
 	li  r5, 0x7FFF
 	and r4, r4, r5
-	lis r5, (CFG_FLASH_BASE & 0xFFFF8000)@h
-	ori r5, r5, (CFG_FLASH_BASE & 0xFFFF8000)@l
+	lis r5, (CONFIG_SYS_FLASH_BASE & 0xFFFF8000)@h
+	ori r5, r5, (CONFIG_SYS_FLASH_BASE & 0xFFFF8000)@l
 	or  r5, r5, r4
-	stw r5, BR0(r3) /* r5 <= (CFG_FLASH_BASE & 0xFFFF8000) | (BR0 & 0x00007FFF) */
+	stw r5, BR0(r3) /* r5 <= (CONFIG_SYS_FLASH_BASE & 0xFFFF8000) | (BR0 & 0x00007FFF) */
 
 	lwz r4, OR0(r3)
-	lis r5, ~((CFG_FLASH_SIZE << 4) - 1)
+	lis r5, ~((CONFIG_SYS_FLASH_SIZE << 4) - 1)
 	or r4, r4, r5
 	stw r4, OR0(r3)
 
-	lis r4, (CFG_FLASH_BASE)@h
-	ori r4, r4, (CFG_FLASH_BASE)@l
-	stw r4, LBLAWBAR0(r3) /* LBLAWBAR0 <= CFG_FLASH_BASE */
+	lis r4, (CONFIG_SYS_FLASH_BASE)@h
+	ori r4, r4, (CONFIG_SYS_FLASH_BASE)@l
+	stw r4, LBLAWBAR0(r3) /* LBLAWBAR0 <= CONFIG_SYS_FLASH_BASE */
 
-	/* Store 0x80000012 + log2(CFG_FLASH_SIZE) into LBLAWAR0 */
+	/* Store 0x80000012 + log2(CONFIG_SYS_FLASH_SIZE) into LBLAWAR0 */
 	lis r4, (0x80000012)@h
 	ori r4, r4, (0x80000012)@l
-	li r5, CFG_FLASH_SIZE
+	li r5, CONFIG_SYS_FLASH_SIZE
 1:	srawi. r5, r5, 1 /* r5 = r5 >> 1 */
 	addi r4, r4, 1
 	bne 1b
@@ -1182,4 +1216,4 @@ remap_flash_by_law0:
 	stw r4, LBLAWBAR1(r3)
 	stw r4, LBLAWAR1(r3) /* Off LBIU LAW1 */
 	blr
-#endif /* CFG_FLASHBOOT */
+#endif /* CONFIG_SYS_FLASHBOOT */
diff --git a/cpu/mpc83xx/traps.c b/cpu/mpc83xx/traps.c
index dfd6c0386..3b09a62ac 100644
--- a/cpu/mpc83xx/traps.c
+++ b/cpu/mpc83xx/traps.c
@@ -100,7 +100,7 @@ _exception(int signr, struct pt_regs *regs)
 void dump_pci (void)
 {
 /*
-	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
 	printf ("PCI: err status %x err mask %x err ctrl %x\n",
 		le32_to_cpu (immap->im_pci.pci_esr),
 		le32_to_cpu (immap->im_pci.pci_emr),
@@ -124,7 +124,7 @@ MachineCheckException(struct pt_regs *regs)
 	 */
 #ifdef CONFIG_PCI
 #if 0
-	volatile immap_t *immap  = (immap_t *)CFG_IMMR;
+	volatile immap_t *immap  = (immap_t *)CONFIG_SYS_IMMR;
 #ifdef DEBUG
 	dump_pci();
 #endif
diff --git a/cpu/mpc83xx/u-boot.lds b/cpu/mpc83xx/u-boot.lds
index 99ad6759d..3a08f642a 100644
--- a/cpu/mpc83xx/u-boot.lds
+++ b/cpu/mpc83xx/u-boot.lds
@@ -116,6 +116,7 @@ SECTIONS
    *(.dynbss)
    *(.bss)
    *(COMMON)
+   . = ALIGN(4);
   }
   _end = . ;
   PROVIDE (end = .);
diff --git a/cpu/mpc85xx/commproc.c b/cpu/mpc85xx/commproc.c
index b0ecd2550..fff8dff50 100644
--- a/cpu/mpc85xx/commproc.c
+++ b/cpu/mpc85xx/commproc.c
@@ -37,10 +37,10 @@ DECLARE_GLOBAL_DATA_PTR;
 void
 m8560_cpm_reset(void)
 {
-	volatile ccsr_cpm_t *cpm = (ccsr_cpm_t *)CFG_MPC85xx_CPM_ADDR;
+	volatile ccsr_cpm_t *cpm = (ccsr_cpm_t *)CONFIG_SYS_MPC85xx_CPM_ADDR;
 	volatile ulong count;
 
-	gd = (gd_t *) (CFG_INIT_RAM_ADDR + CFG_GBL_DATA_OFFSET);
+	gd = (gd_t *) (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET);
 
 	/* Reclaim the DP memory for our use.
 	*/
@@ -64,7 +64,7 @@ m8560_cpm_reset(void)
 uint
 m8560_cpm_dpalloc(uint size, uint align)
 {
-	volatile ccsr_cpm_t *cpm = (ccsr_cpm_t *)CFG_MPC85xx_CPM_ADDR;
+	volatile ccsr_cpm_t *cpm = (ccsr_cpm_t *)CONFIG_SYS_MPC85xx_CPM_ADDR;
 	uint	retloc;
 	uint	align_mask, off;
 	uint	savebase;
@@ -120,7 +120,7 @@ m8560_cpm_hostalloc(uint size, uint align)
 void
 m8560_cpm_setbrg(uint brg, uint rate)
 {
-	volatile ccsr_cpm_t *cpm = (ccsr_cpm_t *)CFG_MPC85xx_CPM_ADDR;
+	volatile ccsr_cpm_t *cpm = (ccsr_cpm_t *)CONFIG_SYS_MPC85xx_CPM_ADDR;
 	volatile uint	*bp;
 
 	/* This is good enough to get SMCs running.....
@@ -142,7 +142,7 @@ m8560_cpm_setbrg(uint brg, uint rate)
 void
 m8560_cpm_fastbrg(uint brg, uint rate, int div16)
 {
-	volatile ccsr_cpm_t *cpm = (ccsr_cpm_t *)CFG_MPC85xx_CPM_ADDR;
+	volatile ccsr_cpm_t *cpm = (ccsr_cpm_t *)CONFIG_SYS_MPC85xx_CPM_ADDR;
 	volatile uint	*bp;
 
 	/* This is good enough to get SMCs running.....
@@ -167,7 +167,7 @@ m8560_cpm_fastbrg(uint brg, uint rate, int div16)
 void
 m8560_cpm_extcbrg(uint brg, uint rate, uint extclk, int pinsel)
 {
-	volatile ccsr_cpm_t *cpm = (ccsr_cpm_t *)CFG_MPC85xx_CPM_ADDR;
+	volatile ccsr_cpm_t *cpm = (ccsr_cpm_t *)CONFIG_SYS_MPC85xx_CPM_ADDR;
 	volatile uint	*bp;
 
 	if (brg < 4) {
@@ -190,7 +190,7 @@ m8560_cpm_extcbrg(uint brg, uint rate, uint extclk, int pinsel)
 void post_word_store (ulong a)
 {
 	volatile ulong *save_addr =
-		(volatile ulong *)(CFG_IMMR + CPM_POST_WORD_ADDR);
+		(volatile ulong *)(CONFIG_SYS_IMMR + CPM_POST_WORD_ADDR);
 
 	*save_addr = a;
 }
@@ -198,7 +198,7 @@ void post_word_store (ulong a)
 ulong post_word_load (void)
 {
 	volatile ulong *save_addr =
-		(volatile ulong *)(CFG_IMMR + CPM_POST_WORD_ADDR);
+		(volatile ulong *)(CONFIG_SYS_IMMR + CPM_POST_WORD_ADDR);
 
 	return *save_addr;
 }
diff --git a/cpu/mpc85xx/cpu.c b/cpu/mpc85xx/cpu.c
index 2fe3cea3f..943602f92 100644
--- a/cpu/mpc85xx/cpu.c
+++ b/cpu/mpc85xx/cpu.c
@@ -25,9 +25,12 @@
  * MA 02111-1307 USA
  */
 
+#include <config.h>
 #include <common.h>
 #include <watchdog.h>
 #include <command.h>
+#include <tsec.h>
+#include <netdev.h>
 #include <asm/cache.h>
 #include <asm/io.h>
 
@@ -81,9 +84,11 @@ int checkcpu (void)
 	uint ver;
 	uint major, minor;
 	struct cpu_type *cpu;
+	char buf1[32], buf2[32];
 #ifdef CONFIG_DDR_CLK_FREQ
-	volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR);
-	u32 ddr_ratio = ((gur->porpllsr) & 0x00003e00) >> 9;
+	volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+	u32 ddr_ratio = ((gur->porpllsr) & MPC85xx_PORPLLSR_DDR_RATIO)
+		>> MPC85xx_PORPLLSR_DDR_RATIO_SHIFT;
 #else
 	u32 ddr_ratio = 0;
 #endif
@@ -96,7 +101,12 @@ int checkcpu (void)
 #endif
 	minor = SVR_MIN(svr);
 
+#if (CONFIG_NUM_CPUS > 1)
+	volatile ccsr_pic_t *pic = (void *)(CONFIG_SYS_MPC85xx_PIC_ADDR);
+	printf("CPU%d:  ", pic->whoami);
+#else
 	puts("CPU:   ");
+#endif
 
 	cpu = identify_cpu(ver);
 	if (cpu) {
@@ -125,34 +135,41 @@ int checkcpu (void)
 	    puts("Unknown");
 	    break;
 	}
+
+	if (PVR_MEM(pvr) == 0x03)
+		puts("MC");
+
 	printf(", Version: %d.%d, (0x%08x)\n", major, minor, pvr);
 
 	get_sys_info(&sysinfo);
 
 	puts("Clock Configuration:\n");
-	printf("       CPU:%4lu MHz, ", DIV_ROUND_UP(sysinfo.freqProcessor,1000000));
-	printf("CCB:%4lu MHz,\n", DIV_ROUND_UP(sysinfo.freqSystemBus,1000000));
+	printf("       CPU:%-4s MHz, ", strmhz(buf1, sysinfo.freqProcessor));
+	printf("CCB:%-4s MHz,\n", strmhz(buf1, sysinfo.freqSystemBus));
 
 	switch (ddr_ratio) {
 	case 0x0:
-		printf("       DDR:%4lu MHz (%lu MT/s data rate), ",
-		DIV_ROUND_UP(sysinfo.freqDDRBus,2000000), DIV_ROUND_UP(sysinfo.freqDDRBus,1000000));
+		printf("       DDR:%-4s MHz (%s MT/s data rate), ",
+			strmhz(buf1, sysinfo.freqDDRBus/2),
+			strmhz(buf2, sysinfo.freqDDRBus));
 		break;
 	case 0x7:
-		printf("       DDR:%4lu MHz (%lu MT/s data rate) (Synchronous), ",
-		DIV_ROUND_UP(sysinfo.freqDDRBus, 2000000), DIV_ROUND_UP(sysinfo.freqDDRBus, 1000000));
+		printf("       DDR:%-4s MHz (%s MT/s data rate) (Synchronous), ",
+			strmhz(buf1, sysinfo.freqDDRBus/2),
+			strmhz(buf2, sysinfo.freqDDRBus));
 		break;
 	default:
-		printf("       DDR:%4lu MHz (%lu MT/s data rate) (Asynchronous), ",
-		DIV_ROUND_UP(sysinfo.freqDDRBus, 2000000), DIV_ROUND_UP(sysinfo.freqDDRBus,1000000));
+		printf("       DDR:%-4s MHz (%s MT/s data rate) (Asynchronous), ",
+			strmhz(buf1, sysinfo.freqDDRBus/2),
+			strmhz(buf2, sysinfo.freqDDRBus));
 		break;
 	}
 
-#if defined(CFG_LBC_LCRR)
-	lcrr = CFG_LBC_LCRR;
+#if defined(CONFIG_SYS_LBC_LCRR)
+	lcrr = CONFIG_SYS_LBC_LCRR;
 #else
 	{
-	    volatile ccsr_lbc_t *lbc = (void *)(CFG_MPC85xx_LBC_ADDR);
+	    volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR);
 
 	    lcrr = lbc->lcrr;
 	}
@@ -167,14 +184,14 @@ int checkcpu (void)
 		 */
 		 clkdiv *= 2;
 #endif
-		printf("LBC:%4lu MHz\n",
-		       DIV_ROUND_UP(sysinfo.freqSystemBus, 1000000) / clkdiv);
+		printf("LBC:%-4s MHz\n",
+		       strmhz(buf1, sysinfo.freqSystemBus / clkdiv));
 	} else {
 		printf("LBC: unknown (lcrr: 0x%08x)\n", lcrr);
 	}
 
 #ifdef CONFIG_CPM2
-	printf("CPM:   %lu Mhz\n", sysinfo.freqSystemBus / 1000000);
+	printf("CPM:   %s MHz\n", strmhz(buf1, sysinfo.freqSystemBus));
 #endif
 
 	puts("L1:    D-cache 32 kB enabled\n       I-cache 32 kB enabled\n");
@@ -197,7 +214,7 @@ int do_reset (cmd_tbl_t *cmdtp, bd_t *bd, int flag, int argc, char *argv[])
 	if (ver & 1){
 	/* e500 v2 core has reset control register */
 		volatile unsigned int * rstcr;
-		rstcr = (volatile unsigned int *)(CFG_IMMR + 0xE00B0);
+		rstcr = (volatile unsigned int *)(CONFIG_SYS_IMMR + 0xE00B0);
 		*rstcr = 0x2;		/* HRESET_REQ */
 		udelay(100);
 	}
@@ -253,7 +270,7 @@ reset_85xx_watchdog(void)
 
 #if defined(CONFIG_DDR_ECC)
 void dma_init(void) {
-	volatile ccsr_dma_t *dma = (void *)(CFG_MPC85xx_DMA_ADDR);
+	volatile ccsr_dma_t *dma = (void *)(CONFIG_SYS_MPC85xx_DMA_ADDR);
 
 	dma->satr0 = 0x02c40000;
 	dma->datr0 = 0x02c40000;
@@ -263,7 +280,7 @@ void dma_init(void) {
 }
 
 uint dma_check(void) {
-	volatile ccsr_dma_t *dma = (void *)(CFG_MPC85xx_DMA_ADDR);
+	volatile ccsr_dma_t *dma = (void *)(CONFIG_SYS_MPC85xx_DMA_ADDR);
 	volatile uint status = dma->sr0;
 
 	/* While the channel is busy, spin */
@@ -282,7 +299,7 @@ uint dma_check(void) {
 }
 
 int dma_xfer(void *dest, uint count, void *src) {
-	volatile ccsr_dma_t *dma = (void *)(CFG_MPC85xx_DMA_ADDR);
+	volatile ccsr_dma_t *dma = (void *)(CONFIG_SYS_MPC85xx_DMA_ADDR);
 
 	dma->dar0 = (uint) dest;
 	dma->sar0 = (uint) src;
@@ -294,16 +311,16 @@ int dma_xfer(void *dest, uint count, void *src) {
 	return dma_check();
 }
 #endif
+
 /*
- * Configures a UPM. Currently, the loop fields in MxMR (RLF, WLF and TLF)
- * are hardcoded as "1"."size" is the number or entries, not a sizeof.
+ * Configures a UPM. The function requires the respective MxMR to be set
+ * before calling this function. "size" is the number or entries, not a sizeof.
  */
 void upmconfig (uint upm, uint * table, uint size)
 {
 	int i, mdr, mad, old_mad = 0;
 	volatile u32 *mxmr;
-	volatile ccsr_lbc_t *lbc = (void *)(CFG_MPC85xx_LBC_ADDR);
-	int loopval = 0x00004440;
+	volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR);
 	volatile u32 *brp,*orp;
 	volatile u8* dummy = NULL;
 	int upmmask;
@@ -331,8 +348,8 @@ void upmconfig (uint upm, uint * table, uint size)
 		 i++, brp += 2, orp += 2) {
 
 		/* Look for a valid BR with selected UPM */
-		if ((in_be32(brp) & (BR_V | upmmask)) == (BR_V | upmmask)) {
-			dummy = (volatile u8*)(in_be32(brp) >> BR_BA_SHIFT);
+		if ((in_be32(brp) & (BR_V | BR_MSEL)) == (BR_V | upmmask)) {
+			dummy = (volatile u8*)(in_be32(brp) & BR_BA);
 			break;
 		}
 	}
@@ -344,7 +361,7 @@ void upmconfig (uint upm, uint * table, uint size)
 
 	for (i = 0; i < size; i++) {
 		/* 1 */
-		out_be32(mxmr, loopval | 0x10000000 | i); /* OP_WRITE */
+		out_be32(mxmr,  (in_be32(mxmr) & 0x4fffffc0) | MxMR_OP_WARR | i);
 		/* 2 */
 		out_be32(&lbc->mdr, table[i]);
 		/* 3 */
@@ -353,39 +370,43 @@ void upmconfig (uint upm, uint * table, uint size)
 		*(volatile u8 *)dummy = 0;
 		/* 5 */
 		do {
-			mad = in_be32(mxmr) & 0x3f;
+			mad = in_be32(mxmr) & MxMR_MAD_MSK;
 		} while (mad <= old_mad && !(!mad && i == (size-1)));
 		old_mad = mad;
 	}
-	out_be32(mxmr, loopval); /* OP_NORMAL */
+	out_be32(mxmr, (in_be32(mxmr) & 0x4fffffc0) | MxMR_OP_NORM);
 }
 
-#if defined(CONFIG_TSEC_ENET) || defined(CONFIGMPC85XX_FEC)
-/* Default initializations for TSEC controllers.  To override,
- * create a board-specific function called:
- * 	int board_eth_init(bd_t *bis)
- */
-
-extern int tsec_initialize(bd_t * bis, int index, char *devname);
 
+/*
+ * Initializes on-chip ethernet controllers.
+ * to override, implement board_eth_init()
+ */
 int cpu_eth_init(bd_t *bis)
 {
-#if defined(CONFIG_TSEC1)
-	tsec_initialize(bis, 0, CONFIG_TSEC1_NAME);
+#if defined(CONFIG_ETHER_ON_FCC)
+	fec_initialize(bis);
 #endif
-#if defined(CONFIG_TSEC2)
-	tsec_initialize(bis, 1, CONFIG_TSEC2_NAME);
+#if defined(CONFIG_UEC_ETH1)
+	uec_initialize(0);
 #endif
-#if defined(CONFIG_MPC85XX_FEC)
-	tsec_initialize(bis, 2, CONFIG_MPC85XX_FEC_NAME);
-#else
-#if defined(CONFIG_TSEC3)
-	tsec_initialize(bis, 2, CONFIG_TSEC3_NAME);
+#if defined(CONFIG_UEC_ETH2)
+	uec_initialize(1);
+#endif
+#if defined(CONFIG_UEC_ETH3)
+	uec_initialize(2);
 #endif
-#if defined(CONFIG_TSEC4)
-	tsec_initialize(bis, 3, CONFIG_TSEC4_NAME);
+#if defined(CONFIG_UEC_ETH4)
+	uec_initialize(3);
 #endif
+#if defined(CONFIG_UEC_ETH5)
+	uec_initialize(4);
+#endif
+#if defined(CONFIG_UEC_ETH6)
+	uec_initialize(5);
+#endif
+#if defined(CONFIG_TSEC_ENET) || defined(CONFIG_MPC85XX_FEC)
+	tsec_standard_init(bis);
 #endif
 	return 0;
 }
-#endif
diff --git a/cpu/mpc85xx/cpu_init.c b/cpu/mpc85xx/cpu_init.c
index 783c5bae7..0b7c60971 100644
--- a/cpu/mpc85xx/cpu_init.c
+++ b/cpu/mpc85xx/cpu_init.c
@@ -132,32 +132,33 @@ void config_8560_ioports (volatile ccsr_cpm_t * cpm)
 /* We run cpu_init_early_f in AS = 1 */
 void cpu_init_early_f(void)
 {
-	set_tlb(0, CFG_CCSRBAR, CFG_CCSRBAR_PHYS,
+	/* Pointer is writable since we allocated a register for it */
+	gd = (gd_t *) (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET);
+
+	/* Clear initial global data */
+	memset ((void *) gd, 0, sizeof (gd_t));
+
+	set_tlb(0, CONFIG_SYS_CCSRBAR, CONFIG_SYS_CCSRBAR_PHYS,
 		MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 		1, 0, BOOKE_PAGESZ_4K, 0);
 
 	/* set up CCSR if we want it moved */
-#if (CFG_CCSRBAR_DEFAULT != CFG_CCSRBAR_PHYS)
+#if (CONFIG_SYS_CCSRBAR_DEFAULT != CONFIG_SYS_CCSRBAR_PHYS)
 	{
 		u32 temp;
+		volatile u32 *ccsr_virt =
+			(volatile u32 *)(CONFIG_SYS_CCSRBAR + 0x1000);
 
-		set_tlb(0, CFG_CCSRBAR_DEFAULT, CFG_CCSRBAR_DEFAULT,
+		set_tlb(0, (u32)ccsr_virt, CONFIG_SYS_CCSRBAR_DEFAULT,
 			MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 			1, 1, BOOKE_PAGESZ_4K, 0);
 
-		temp = in_be32((volatile u32 *)CFG_CCSRBAR_DEFAULT);
-		out_be32((volatile u32 *)CFG_CCSRBAR_DEFAULT, CFG_CCSRBAR_PHYS >> 12);
-
-		temp = in_be32((volatile u32 *)CFG_CCSRBAR);
+		temp = in_be32(ccsr_virt);
+		out_be32(ccsr_virt, CONFIG_SYS_CCSRBAR_PHYS >> 12);
+		temp = in_be32((volatile u32 *)CONFIG_SYS_CCSRBAR);
 	}
 #endif
 
-	/* Pointer is writable since we allocated a register for it */
-	gd = (gd_t *) (CFG_INIT_RAM_ADDR + CFG_GBL_DATA_OFFSET);
-
-	/* Clear initial global data */
-	memset ((void *) gd, 0, sizeof (gd_t));
-
 	init_laws();
 	invalidate_tlb(0);
 	init_tlbs();
@@ -172,69 +173,82 @@ void cpu_init_early_f(void)
 
 void cpu_init_f (void)
 {
-	volatile ccsr_lbc_t *memctl = (void *)(CFG_MPC85xx_LBC_ADDR);
+	volatile ccsr_lbc_t *memctl = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR);
 	extern void m8560_cpm_reset (void);
+#ifdef CONFIG_MPC8548
+	ccsr_local_ecm_t *ecm = (void *)(CONFIG_SYS_MPC85xx_ECM_ADDR);
+	uint svr = get_svr();
+
+	/*
+	 * CPU2 errata workaround: A core hang possible while executing
+	 * a msync instruction and a snoopable transaction from an I/O
+	 * master tagged to make quick forward progress is present.
+	 * Fixed in silicon rev 2.1.
+	 */
+	if ((SVR_MAJ(svr) == 1) || ((SVR_MAJ(svr) == 2 && SVR_MIN(svr) == 0x0)))
+		out_be32(&ecm->eebpcr, in_be32(&ecm->eebpcr) | (1 << 16));
+#endif
 
 	disable_tlb(14);
 	disable_tlb(15);
 
 #ifdef CONFIG_CPM2
-	config_8560_ioports((ccsr_cpm_t *)CFG_MPC85xx_CPM_ADDR);
+	config_8560_ioports((ccsr_cpm_t *)CONFIG_SYS_MPC85xx_CPM_ADDR);
 #endif
 
 	/* Map banks 0 and 1 to the FLASH banks 0 and 1 at preliminary
 	 * addresses - these have to be modified later when FLASH size
 	 * has been determined
 	 */
-#if defined(CFG_OR0_REMAP)
-	memctl->or0 = CFG_OR0_REMAP;
+#if defined(CONFIG_SYS_OR0_REMAP)
+	memctl->or0 = CONFIG_SYS_OR0_REMAP;
 #endif
-#if defined(CFG_OR1_REMAP)
-	memctl->or1 = CFG_OR1_REMAP;
+#if defined(CONFIG_SYS_OR1_REMAP)
+	memctl->or1 = CONFIG_SYS_OR1_REMAP;
 #endif
 
 	/* now restrict to preliminary range */
 	/* if cs1 is already set via debugger, leave cs0/cs1 alone */
 	if (! memctl->br1 & 1) {
-#if defined(CFG_BR0_PRELIM) && defined(CFG_OR0_PRELIM)
-		memctl->br0 = CFG_BR0_PRELIM;
-		memctl->or0 = CFG_OR0_PRELIM;
+#if defined(CONFIG_SYS_BR0_PRELIM) && defined(CONFIG_SYS_OR0_PRELIM)
+		memctl->br0 = CONFIG_SYS_BR0_PRELIM;
+		memctl->or0 = CONFIG_SYS_OR0_PRELIM;
 #endif
 
-#if defined(CFG_BR1_PRELIM) && defined(CFG_OR1_PRELIM)
-		memctl->or1 = CFG_OR1_PRELIM;
-		memctl->br1 = CFG_BR1_PRELIM;
+#if defined(CONFIG_SYS_BR1_PRELIM) && defined(CONFIG_SYS_OR1_PRELIM)
+		memctl->or1 = CONFIG_SYS_OR1_PRELIM;
+		memctl->br1 = CONFIG_SYS_BR1_PRELIM;
 #endif
 	}
 
-#if defined(CFG_BR2_PRELIM) && defined(CFG_OR2_PRELIM)
-	memctl->or2 = CFG_OR2_PRELIM;
-	memctl->br2 = CFG_BR2_PRELIM;
+#if defined(CONFIG_SYS_BR2_PRELIM) && defined(CONFIG_SYS_OR2_PRELIM)
+	memctl->or2 = CONFIG_SYS_OR2_PRELIM;
+	memctl->br2 = CONFIG_SYS_BR2_PRELIM;
 #endif
 
-#if defined(CFG_BR3_PRELIM) && defined(CFG_OR3_PRELIM)
-	memctl->or3 = CFG_OR3_PRELIM;
-	memctl->br3 = CFG_BR3_PRELIM;
+#if defined(CONFIG_SYS_BR3_PRELIM) && defined(CONFIG_SYS_OR3_PRELIM)
+	memctl->or3 = CONFIG_SYS_OR3_PRELIM;
+	memctl->br3 = CONFIG_SYS_BR3_PRELIM;
 #endif
 
-#if defined(CFG_BR4_PRELIM) && defined(CFG_OR4_PRELIM)
-	memctl->or4 = CFG_OR4_PRELIM;
-	memctl->br4 = CFG_BR4_PRELIM;
+#if defined(CONFIG_SYS_BR4_PRELIM) && defined(CONFIG_SYS_OR4_PRELIM)
+	memctl->or4 = CONFIG_SYS_OR4_PRELIM;
+	memctl->br4 = CONFIG_SYS_BR4_PRELIM;
 #endif
 
-#if defined(CFG_BR5_PRELIM) && defined(CFG_OR5_PRELIM)
-	memctl->or5 = CFG_OR5_PRELIM;
-	memctl->br5 = CFG_BR5_PRELIM;
+#if defined(CONFIG_SYS_BR5_PRELIM) && defined(CONFIG_SYS_OR5_PRELIM)
+	memctl->or5 = CONFIG_SYS_OR5_PRELIM;
+	memctl->br5 = CONFIG_SYS_BR5_PRELIM;
 #endif
 
-#if defined(CFG_BR6_PRELIM) && defined(CFG_OR6_PRELIM)
-	memctl->or6 = CFG_OR6_PRELIM;
-	memctl->br6 = CFG_BR6_PRELIM;
+#if defined(CONFIG_SYS_BR6_PRELIM) && defined(CONFIG_SYS_OR6_PRELIM)
+	memctl->or6 = CONFIG_SYS_OR6_PRELIM;
+	memctl->br6 = CONFIG_SYS_BR6_PRELIM;
 #endif
 
-#if defined(CFG_BR7_PRELIM) && defined(CFG_OR7_PRELIM)
-	memctl->or7 = CFG_OR7_PRELIM;
-	memctl->br7 = CFG_BR7_PRELIM;
+#if defined(CONFIG_SYS_BR7_PRELIM) && defined(CONFIG_SYS_OR7_PRELIM)
+	memctl->or7 = CONFIG_SYS_OR7_PRELIM;
+	memctl->br7 = CONFIG_SYS_BR7_PRELIM;
 #endif
 
 #if defined(CONFIG_CPM2)
@@ -264,7 +278,7 @@ int cpu_init_r(void)
 	puts ("L2:    ");
 
 #if defined(CONFIG_L2_CACHE)
-	volatile ccsr_l2cache_t *l2cache = (void *)CFG_MPC85xx_L2_ADDR;
+	volatile ccsr_l2cache_t *l2cache = (void *)CONFIG_SYS_MPC85xx_L2_ADDR;
 	volatile uint cache_ctl;
 	uint svr, ver;
 	uint l2srbar;
@@ -317,13 +331,13 @@ int cpu_init_r(void)
 	if (l2cache->l2ctl & 0x80000000) {
 		puts("already enabled");
 		l2srbar = l2cache->l2srbar0;
-#ifdef CFG_INIT_L2_ADDR
-		if (l2cache->l2ctl & 0x00010000 && l2srbar >= CFG_FLASH_BASE) {
-			l2srbar = CFG_INIT_L2_ADDR;
+#ifdef CONFIG_SYS_INIT_L2_ADDR
+		if (l2cache->l2ctl & 0x00010000 && l2srbar >= CONFIG_SYS_FLASH_BASE) {
+			l2srbar = CONFIG_SYS_INIT_L2_ADDR;
 			l2cache->l2srbar0 = l2srbar;
-			printf("moving to 0x%08x", CFG_INIT_L2_ADDR);
+			printf("moving to 0x%08x", CONFIG_SYS_INIT_L2_ADDR);
 		}
-#endif /* CFG_INIT_L2_ADDR */
+#endif /* CONFIG_SYS_INIT_L2_ADDR */
 		puts("\n");
 	} else {
 		asm("msync;isync");
@@ -335,7 +349,7 @@ int cpu_init_r(void)
 	puts("disabled\n");
 #endif
 #ifdef CONFIG_QE
-	uint qe_base = CFG_IMMR + 0x00080000; /* QE immr base */
+	uint qe_base = CONFIG_SYS_IMMR + 0x00080000; /* QE immr base */
 	qe_init(qe_base);
 	qe_reset();
 #endif
diff --git a/cpu/mpc85xx/ddr-gen1.c b/cpu/mpc85xx/ddr-gen1.c
index 2c11ee4d0..e24c9afaf 100644
--- a/cpu/mpc85xx/ddr-gen1.c
+++ b/cpu/mpc85xx/ddr-gen1.c
@@ -18,7 +18,7 @@ void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs,
 			     unsigned int ctrl_num)
 {
 	unsigned int i;
-	volatile ccsr_ddr_t *ddr = (void *)CFG_MPC85xx_DDR_ADDR;
+	volatile ccsr_ddr_t *ddr = (void *)CONFIG_SYS_MPC85xx_DDR_ADDR;
 
 	if (ctrl_num != 0) {
 		printf("%s unexpected ctrl_num = %u\n", __FUNCTION__, ctrl_num);
@@ -79,7 +79,7 @@ ddr_enable_ecc(unsigned int dram_size)
 {
 	uint *p = 0;
 	uint i = 0;
-	volatile ccsr_ddr_t *ddr= (void *)(CFG_MPC85xx_DDR_ADDR);
+	volatile ccsr_ddr_t *ddr= (void *)(CONFIG_SYS_MPC85xx_DDR_ADDR);
 
 	dma_init();
 
diff --git a/cpu/mpc85xx/ddr-gen2.c b/cpu/mpc85xx/ddr-gen2.c
index 130090c21..655f99c02 100644
--- a/cpu/mpc85xx/ddr-gen2.c
+++ b/cpu/mpc85xx/ddr-gen2.c
@@ -18,7 +18,7 @@ void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs,
 			     unsigned int ctrl_num)
 {
 	unsigned int i;
-	volatile ccsr_ddr_t *ddr = (void *)CFG_MPC85xx_DDR_ADDR;
+	volatile ccsr_ddr_t *ddr = (void *)CONFIG_SYS_MPC85xx_DDR_ADDR;
 
 	if (ctrl_num) {
 		printf("%s unexpected ctrl_num = %u\n", __FUNCTION__, ctrl_num);
diff --git a/cpu/mpc85xx/ddr-gen3.c b/cpu/mpc85xx/ddr-gen3.c
index d7cc9db4e..a2b45c571 100644
--- a/cpu/mpc85xx/ddr-gen3.c
+++ b/cpu/mpc85xx/ddr-gen3.c
@@ -22,10 +22,10 @@ void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs,
 
 	switch (ctrl_num) {
 	case 0:
-		ddr = (void *)CFG_MPC85xx_DDR_ADDR;
+		ddr = (void *)CONFIG_SYS_MPC85xx_DDR_ADDR;
 		break;
 	case 1:
-		ddr = (void *)CFG_MPC85xx_DDR2_ADDR;
+		ddr = (void *)CONFIG_SYS_MPC85xx_DDR2_ADDR;
 		break;
 	default:
 		printf("%s unexpected ctrl_num = %u\n", __FUNCTION__, ctrl_num);
@@ -79,15 +79,18 @@ void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs,
 	out_be32(&ddr->ddr_sdram_rcw_2, regs->ddr_sdram_rcw_2);
 
 	/*
-	 * 32-bit workaround for DDR2
-	 * 32_BE
+	 * For 8572 DDR1 erratum - DDR controller may enter illegal state
+	 * when operatiing in 32-bit bus mode with 4-beat bursts,
+	 * This erratum does not affect DDR3 mode, only for DDR2 mode.
 	 */
+#ifdef CONFIG_MPC8572
 	if ((((in_be32(&ddr->sdram_cfg) >> 24) & 0x7) == SDRAM_TYPE_DDR2)
-	    && in_be32(&ddr->sdram_cfg_2) & 0x80000) {
+	    && in_be32(&ddr->sdram_cfg) & 0x80000) {
 		/* set DEBUG_1[31] */
 		u32 temp = in_be32(&ddr->debug_1);
 		out_be32(&ddr->debug_1, temp | 1);
 	}
+#endif
 
 	/*
 	 * 200 painful micro-seconds must elapse between
diff --git a/cpu/mpc85xx/ether_fcc.c b/cpu/mpc85xx/ether_fcc.c
index bd62aab9f..32ad46956 100644
--- a/cpu/mpc85xx/ether_fcc.c
+++ b/cpu/mpc85xx/ether_fcc.c
@@ -74,8 +74,8 @@ static struct ether_fcc_info_s
 	PROFF_FCC1,
 	CPM_CR_FCC1_SBLOCK,
 	CPM_CR_FCC1_PAGE,
-	CFG_CMXFCR_MASK1,
-	CFG_CMXFCR_VALUE1
+	CONFIG_SYS_CMXFCR_MASK1,
+	CONFIG_SYS_CMXFCR_VALUE1
 },
 #endif
 
@@ -85,8 +85,8 @@ static struct ether_fcc_info_s
 	PROFF_FCC2,
 	CPM_CR_FCC2_SBLOCK,
 	CPM_CR_FCC2_PAGE,
-	CFG_CMXFCR_MASK2,
-	CFG_CMXFCR_VALUE2
+	CONFIG_SYS_CMXFCR_MASK2,
+	CONFIG_SYS_CMXFCR_VALUE2
 },
 #endif
 
@@ -96,8 +96,8 @@ static struct ether_fcc_info_s
 	PROFF_FCC3,
 	CPM_CR_FCC3_SBLOCK,
 	CPM_CR_FCC3_PAGE,
-	CFG_CMXFCR_MASK3,
-	CFG_CMXFCR_VALUE3
+	CONFIG_SYS_CMXFCR_MASK3,
+	CONFIG_SYS_CMXFCR_VALUE3
 },
 #endif
 };
@@ -230,7 +230,7 @@ static int fec_init(struct eth_device* dev, bd_t *bis)
 {
     struct ether_fcc_info_s * info = dev->priv;
     int i;
-    volatile ccsr_cpm_t *cpm = (ccsr_cpm_t *)CFG_MPC85xx_CPM_ADDR;
+    volatile ccsr_cpm_t *cpm = (ccsr_cpm_t *)CONFIG_SYS_MPC85xx_CPM_ADDR;
     volatile ccsr_cpm_cp_t *cp = &(cpm->im_cpm_cp);
     fcc_enet_t *pram_ptr;
     unsigned long mem_addr;
@@ -257,11 +257,11 @@ static int fec_init(struct eth_device* dev, bd_t *bis)
 
     /* 28.9 - (5): FPSMR: enable full duplex, select CCITT CRC for Ethernet,MII */
     if(info->ether_index == 0) {
-	cpm->im_cpm_fcc1.fpsmr = CFG_FCC_PSMR | FCC_PSMR_ENCRC;
+	cpm->im_cpm_fcc1.fpsmr = CONFIG_SYS_FCC_PSMR | FCC_PSMR_ENCRC;
     } else if (info->ether_index == 1){
-	cpm->im_cpm_fcc2.fpsmr = CFG_FCC_PSMR | FCC_PSMR_ENCRC;
+	cpm->im_cpm_fcc2.fpsmr = CONFIG_SYS_FCC_PSMR | FCC_PSMR_ENCRC;
     } else if (info->ether_index == 2){
-	cpm->im_cpm_fcc3.fpsmr = CFG_FCC_PSMR | FCC_PSMR_ENCRC;
+	cpm->im_cpm_fcc3.fpsmr = CONFIG_SYS_FCC_PSMR | FCC_PSMR_ENCRC;
     }
 
     /* 28.9 - (6): FDSR: Ethernet Syn */
@@ -321,14 +321,14 @@ static int fec_init(struct eth_device* dev, bd_t *bis)
     pram_ptr->fen_genfcc.fcc_mrblr = PKT_MAXBLR_SIZE; /* 1536 */
     /* localbus SDRAM should be preferred */
     pram_ptr->fen_genfcc.fcc_rstate = (CPMFCR_GBL | CPMFCR_EB |
-				       CFG_CPMFCR_RAMTYPE) << 24;
+				       CONFIG_SYS_CPMFCR_RAMTYPE) << 24;
     pram_ptr->fen_genfcc.fcc_rbase = (unsigned int)(&rtx.rxbd[rxIdx]);
     pram_ptr->fen_genfcc.fcc_rbdstat = 0;
     pram_ptr->fen_genfcc.fcc_rbdlen = 0;
     pram_ptr->fen_genfcc.fcc_rdptr = 0;
     /* localbus SDRAM should be preferred */
     pram_ptr->fen_genfcc.fcc_tstate = (CPMFCR_GBL | CPMFCR_EB |
-				       CFG_CPMFCR_RAMTYPE) << 24;
+				       CONFIG_SYS_CPMFCR_RAMTYPE) << 24;
     pram_ptr->fen_genfcc.fcc_tbase = (unsigned int)(&rtx.txbd[txIdx]);
     pram_ptr->fen_genfcc.fcc_tbdstat = 0;
     pram_ptr->fen_genfcc.fcc_tbdlen = 0;
@@ -426,7 +426,7 @@ static int fec_init(struct eth_device* dev, bd_t *bis)
 static void fec_halt(struct eth_device* dev)
 {
     struct ether_fcc_info_s * info = dev->priv;
-    volatile ccsr_cpm_t *cpm = (ccsr_cpm_t *)CFG_MPC85xx_CPM_ADDR;
+    volatile ccsr_cpm_t *cpm = (ccsr_cpm_t *)CONFIG_SYS_MPC85xx_CPM_ADDR;
 
     /* write GFMR: disable tx/rx */
     if(info->ether_index == 0) {
diff --git a/cpu/mpc85xx/fdt.c b/cpu/mpc85xx/fdt.c
index bc1550d7c..59aafb1be 100644
--- a/cpu/mpc85xx/fdt.c
+++ b/cpu/mpc85xx/fdt.c
@@ -83,7 +83,7 @@ void ft_fixup_cpu(void *blob, u64 memory_limit)
 /* return size in kilobytes */
 static inline u32 l2cache_size(void)
 {
-	volatile ccsr_l2cache_t *l2cache = (void *)CFG_MPC85xx_L2_ADDR;
+	volatile ccsr_l2cache_t *l2cache = (void *)CONFIG_SYS_MPC85xx_L2_ADDR;
 	volatile u32 l2siz_field = (l2cache->l2ctl >> 28) & 0x3;
 	u32 ver = SVR_SOC_VER(get_svr());
 
@@ -152,7 +152,6 @@ static inline void ft_fixup_l2cache(void *blob)
 	}
 	fdt_setprop(blob, off, "cache-unified", NULL, 0);
 	fdt_setprop_cell(blob, off, "cache-block-size", line_size);
-	fdt_setprop_cell(blob, off, "cache-line-size", line_size);
 	fdt_setprop_cell(blob, off, "cache-size", size);
 	fdt_setprop_cell(blob, off, "cache-sets", num_sets);
 	fdt_setprop_cell(blob, off, "cache-level", 2);
@@ -181,7 +180,6 @@ static inline void ft_fixup_cache(void *blob)
 		dnum_sets = dsize / (dline_size * dnum_ways);
 
 		fdt_setprop_cell(blob, off, "d-cache-block-size", dline_size);
-		fdt_setprop_cell(blob, off, "d-cache-line-size", dline_size);
 		fdt_setprop_cell(blob, off, "d-cache-size", dsize);
 		fdt_setprop_cell(blob, off, "d-cache-sets", dnum_sets);
 
@@ -192,7 +190,6 @@ static inline void ft_fixup_cache(void *blob)
 		inum_sets = isize / (iline_size * inum_ways);
 
 		fdt_setprop_cell(blob, off, "i-cache-block-size", iline_size);
-		fdt_setprop_cell(blob, off, "i-cache-line-size", iline_size);
 		fdt_setprop_cell(blob, off, "i-cache-size", isize);
 		fdt_setprop_cell(blob, off, "i-cache-sets", inum_sets);
 
@@ -204,6 +201,15 @@ static inline void ft_fixup_cache(void *blob)
 }
 
 
+void fdt_add_enet_stashing(void *fdt)
+{
+	do_fixup_by_compat(fdt, "gianfar", "bd-stash", NULL, 0, 1);
+
+	do_fixup_by_compat_u32(fdt, "gianfar", "rx-stash-len", 96, 1);
+
+	do_fixup_by_compat_u32(fdt, "gianfar", "rx-stash-idx", 0, 1);
+}
+
 void ft_cpu_setup(void *blob, bd_t *bd)
 {
 	/* delete crypto node if not on an E-processor */
@@ -213,6 +219,8 @@ void ft_cpu_setup(void *blob, bd_t *bd)
 #if defined(CONFIG_HAS_ETH0) || defined(CONFIG_HAS_ETH1) ||\
     defined(CONFIG_HAS_ETH2) || defined(CONFIG_HAS_ETH3)
 	fdt_fixup_ethernet(blob);
+
+	fdt_add_enet_stashing(blob);
 #endif
 
 	do_fixup_by_prop_u32(blob, "device_type", "cpu", 4,
@@ -227,9 +235,9 @@ void ft_cpu_setup(void *blob, bd_t *bd)
 	ft_qe_setup(blob);
 #endif
 
-#ifdef CFG_NS16550
+#ifdef CONFIG_SYS_NS16550
 	do_fixup_by_compat_u32(blob, "ns16550",
-		"clock-frequency", CFG_NS16550_CLK, 1);
+		"clock-frequency", CONFIG_SYS_NS16550_CLK, 1);
 #endif
 
 #ifdef CONFIG_CPM2
diff --git a/cpu/mpc85xx/interrupts.c b/cpu/mpc85xx/interrupts.c
index 06d4d8b73..4ef83950d 100644
--- a/cpu/mpc85xx/interrupts.c
+++ b/cpu/mpc85xx/interrupts.c
@@ -34,43 +34,43 @@
 
 int interrupt_init_cpu(unsigned long *decrementer_count)
 {
-	volatile ccsr_pic_t *pic = (void *)(CFG_MPC85xx_PIC_ADDR);
+	volatile ccsr_pic_t *pic = (void *)(CONFIG_SYS_MPC85xx_PIC_ADDR);
 
 	pic->gcr = MPC85xx_PICGCR_RST;
 	while (pic->gcr & MPC85xx_PICGCR_RST)
 		;
 	pic->gcr = MPC85xx_PICGCR_M;
 
-	*decrementer_count = get_tbclk() / CFG_HZ;
+	*decrementer_count = get_tbclk() / CONFIG_SYS_HZ;
 
 	/* PIE is same as DIE, dec interrupt enable */
 	mtspr(SPRN_TCR, TCR_PIE);
 
 #ifdef CONFIG_INTERRUPTS
 	pic->iivpr1 = 0x810001;	/* 50220 enable ecm interrupts */
-	debug("iivpr1@%x = %x\n",&pic->iivpr1, pic->iivpr1);
+	debug("iivpr1@%x = %x\n", (uint)&pic->iivpr1, pic->iivpr1);
 
 	pic->iivpr2 = 0x810002;	/* 50240 enable ddr interrupts */
-	debug("iivpr2@%x = %x\n",&pic->iivpr2, pic->iivpr2);
+	debug("iivpr2@%x = %x\n", (uint)&pic->iivpr2, pic->iivpr2);
 
 	pic->iivpr3 = 0x810003;	/* 50260 enable lbc interrupts */
-	debug("iivpr3@%x = %x\n",&pic->iivpr3, pic->iivpr3);
+	debug("iivpr3@%x = %x\n", (uint)&pic->iivpr3, pic->iivpr3);
 
 #ifdef CONFIG_PCI1
 	pic->iivpr8 = 0x810008;	/* enable pci1 interrupts */
-	debug("iivpr8@%x = %x\n",&pic->iivpr8, pic->iivpr8);
+	debug("iivpr8@%x = %x\n", (uint)&pic->iivpr8, pic->iivpr8);
 #endif
 #if defined(CONFIG_PCI2) || defined(CONFIG_PCIE2)
 	pic->iivpr9 = 0x810009;	/* enable pci1 interrupts */
-	debug("iivpr9@%x = %x\n",&pic->iivpr9, pic->iivpr9);
+	debug("iivpr9@%x = %x\n", (uint)&pic->iivpr9, pic->iivpr9);
 #endif
 #ifdef CONFIG_PCIE1
 	pic->iivpr10 = 0x81000a;	/* enable pcie1 interrupts */
-	debug("iivpr10@%x = %x\n",&pic->iivpr10, pic->iivpr10);
+	debug("iivpr10@%x = %x\n", (uint)&pic->iivpr10, pic->iivpr10);
 #endif
 #ifdef CONFIG_PCIE3
 	pic->iivpr11 = 0x81000b;	/* enable pcie3 interrupts */
-	debug("iivpr11@%x = %x\n",&pic->iivpr11, pic->iivpr11);
+	debug("iivpr11@%x = %x\n", (uint)&pic->iivpr11, pic->iivpr11);
 #endif
 
 	pic->ctpr=0;		/* 40080 clear current task priority register */
diff --git a/cpu/mpc85xx/mp.c b/cpu/mpc85xx/mp.c
index 4e09c9c25..3338c1aa7 100644
--- a/cpu/mpc85xx/mp.c
+++ b/cpu/mpc85xx/mp.c
@@ -36,7 +36,7 @@ u32 get_my_id()
 
 int cpu_reset(int nr)
 {
-	volatile ccsr_pic_t *pic = (void *)(CFG_MPC85xx_PIC_ADDR);
+	volatile ccsr_pic_t *pic = (void *)(CONFIG_SYS_MPC85xx_PIC_ADDR);
 	out_be32(&pic->pir, 1 << nr);
 	(void)in_be32(&pic->pir);
 	out_be32(&pic->pir, 0x0);
@@ -87,7 +87,7 @@ int cpu_release(int nr, int argc, char *argv[])
 		return 1;
 	}
 
-#ifdef CFG_64BIT_STRTOUL
+#ifdef CONFIG_SYS_64BIT_STRTOUL
 	boot_addr = simple_strtoull(argv[0], NULL, 16);
 #else
 	boot_addr = simple_strtoul(argv[0], NULL, 16);
@@ -129,9 +129,9 @@ static void pq3_mp_up(unsigned long bootpg)
 	u32 up, cpu_up_mask, whoami;
 	u32 *table = (u32 *)get_spin_addr();
 	volatile u32 bpcr;
-	volatile ccsr_local_ecm_t *ecm = (void *)(CFG_MPC85xx_ECM_ADDR);
-	volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR);
-	volatile ccsr_pic_t *pic = (void *)(CFG_MPC85xx_PIC_ADDR);
+	volatile ccsr_local_ecm_t *ecm = (void *)(CONFIG_SYS_MPC85xx_ECM_ADDR);
+	volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+	volatile ccsr_pic_t *pic = (void *)(CONFIG_SYS_MPC85xx_PIC_ADDR);
 	u32 devdisr;
 	int timeout = 10;
 
diff --git a/cpu/mpc85xx/mpc8536_serdes.c b/cpu/mpc85xx/mpc8536_serdes.c
index ae091e6ad..d9ac46621 100644
--- a/cpu/mpc85xx/mpc8536_serdes.c
+++ b/cpu/mpc85xx/mpc8536_serdes.c
@@ -54,8 +54,8 @@
 
 void fsl_serdes_init(void)
 {
-	void *guts = (void *)(CFG_MPC85xx_GUTS_ADDR);
-	void *sd = (void *)CFG_MPC85xx_SERDES2_ADDR;
+	void *guts = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+	void *sd = (void *)CONFIG_SYS_MPC85xx_SERDES2_ADDR;
 	u32 pordevsr = in_be32(guts + GUTS_PORDEVSR_OFFS);
 	u32 srds2_io_sel;
 	u32 tmp;
diff --git a/cpu/mpc85xx/pci.c b/cpu/mpc85xx/pci.c
index fdc4c83b7..787c6eb74 100644
--- a/cpu/mpc85xx/pci.c
+++ b/cpu/mpc85xx/pci.c
@@ -39,11 +39,11 @@ pci_mpc85xx_init(struct pci_controller *board_hose)
 	u16 reg16;
 	u32 dev;
 
-	volatile ccsr_pcix_t *pcix = (void *)(CFG_MPC85xx_PCIX_ADDR);
+	volatile ccsr_pcix_t *pcix = (void *)(CONFIG_SYS_MPC85xx_PCIX_ADDR);
 #ifdef CONFIG_MPC85XX_PCI2
-	volatile ccsr_pcix_t *pcix2 = (void *)(CFG_MPC85xx_PCIX2_ADDR);
+	volatile ccsr_pcix_t *pcix2 = (void *)(CONFIG_SYS_MPC85xx_PCIX2_ADDR);
 #endif
-	volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR);
+	volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
 	struct pci_controller * hose;
 
 	pci_hose = board_hose;
@@ -54,8 +54,8 @@ pci_mpc85xx_init(struct pci_controller *board_hose)
 	hose->last_busno = 0xff;
 
 	pci_setup_indirect(hose,
-			   (CFG_IMMR+0x8000),
-			   (CFG_IMMR+0x8004));
+			   (CONFIG_SYS_IMMR+0x8000),
+			   (CONFIG_SYS_IMMR+0x8004));
 
 	/*
 	 * Hose scan.
@@ -70,7 +70,7 @@ pci_mpc85xx_init(struct pci_controller *board_hose)
 	 */
 	pci_hose_write_config_word(hose, dev, PCI_STATUS, 0xffff);
 
-	if (!(gur->pordevsr & PORDEVSR_PCI)) {
+	if (!(gur->pordevsr & MPC85xx_PORDEVSR_PCI1)) {
 		/* PCI-X init */
 		if (CONFIG_SYS_CLK_FREQ < 66000000)
 			printf("PCI-X will only work at 66 MHz\n");
@@ -80,19 +80,19 @@ pci_mpc85xx_init(struct pci_controller *board_hose)
 		pci_hose_write_config_word(hose, dev, PCIX_COMMAND, reg16);
 	}
 
-	pcix->potar1   = (CFG_PCI1_MEM_BASE >> 12) & 0x000fffff;
+	pcix->potar1   = (CONFIG_SYS_PCI1_MEM_BASE >> 12) & 0x000fffff;
 	pcix->potear1  = 0x00000000;
-	pcix->powbar1  = (CFG_PCI1_MEM_PHYS >> 12) & 0x000fffff;
+	pcix->powbar1  = (CONFIG_SYS_PCI1_MEM_PHYS >> 12) & 0x000fffff;
 	pcix->powbear1 = 0x00000000;
 	pcix->powar1 = (POWAR_EN | POWAR_MEM_READ |
-			POWAR_MEM_WRITE | (__ilog2(CFG_PCI1_MEM_SIZE) - 1));
+			POWAR_MEM_WRITE | (__ilog2(CONFIG_SYS_PCI1_MEM_SIZE) - 1));
 
-	pcix->potar2  = (CFG_PCI1_IO_BASE >> 12) & 0x000fffff;
+	pcix->potar2  = (CONFIG_SYS_PCI1_IO_BASE >> 12) & 0x000fffff;
 	pcix->potear2  = 0x00000000;
-	pcix->powbar2  = (CFG_PCI1_IO_PHYS >> 12) & 0x000fffff;
+	pcix->powbar2  = (CONFIG_SYS_PCI1_IO_PHYS >> 12) & 0x000fffff;
 	pcix->powbear2 = 0x00000000;
 	pcix->powar2 = (POWAR_EN | POWAR_IO_READ |
-			POWAR_IO_WRITE | (__ilog2(CFG_PCI1_IO_SIZE) - 1));
+			POWAR_IO_WRITE | (__ilog2(CONFIG_SYS_PCI1_IO_SIZE) - 1));
 
 	pcix->pitar1 = 0x00000000;
 	pcix->piwbar1 = 0x00000000;
@@ -105,15 +105,15 @@ pci_mpc85xx_init(struct pci_controller *board_hose)
 	pcix->piwar3 = 0;
 
 	pci_set_region(hose->regions + 0,
-		       CFG_PCI1_MEM_BASE,
-		       CFG_PCI1_MEM_PHYS,
-		       CFG_PCI1_MEM_SIZE,
+		       CONFIG_SYS_PCI1_MEM_BASE,
+		       CONFIG_SYS_PCI1_MEM_PHYS,
+		       CONFIG_SYS_PCI1_MEM_SIZE,
 		       PCI_REGION_MEM);
 
 	pci_set_region(hose->regions + 1,
-		       CFG_PCI1_IO_BASE,
-		       CFG_PCI1_IO_PHYS,
-		       CFG_PCI1_IO_SIZE,
+		       CONFIG_SYS_PCI1_IO_BASE,
+		       CONFIG_SYS_PCI1_IO_PHYS,
+		       CONFIG_SYS_PCI1_IO_SIZE,
 		       PCI_REGION_IO);
 
 	hose->region_count = 2;
@@ -152,8 +152,8 @@ pci_mpc85xx_init(struct pci_controller *board_hose)
 	hose->last_busno = 0xff;
 
 	pci_setup_indirect(hose,
-			   (CFG_IMMR+0x9000),
-			   (CFG_IMMR+0x9004));
+			   (CONFIG_SYS_IMMR+0x9000),
+			   (CONFIG_SYS_IMMR+0x9004));
 
 	dev = PCI_BDF(hose->first_busno, 0, 0);
 	pci_hose_read_config_word (hose, dev, PCI_COMMAND, &reg16);
@@ -165,19 +165,19 @@ pci_mpc85xx_init(struct pci_controller *board_hose)
 	 */
 	pci_hose_write_config_word(hose, dev, PCI_STATUS, 0xffff);
 
-	pcix2->potar1   = (CFG_PCI2_MEM_BASE >> 12) & 0x000fffff;
+	pcix2->potar1   = (CONFIG_SYS_PCI2_MEM_BASE >> 12) & 0x000fffff;
 	pcix2->potear1  = 0x00000000;
-	pcix2->powbar1  = (CFG_PCI2_MEM_PHYS >> 12) & 0x000fffff;
+	pcix2->powbar1  = (CONFIG_SYS_PCI2_MEM_PHYS >> 12) & 0x000fffff;
 	pcix2->powbear1 = 0x00000000;
 	pcix2->powar1 = (POWAR_EN | POWAR_MEM_READ |
-			POWAR_MEM_WRITE | (__ilog2(CFG_PCI2_MEM_SIZE) - 1));
+			POWAR_MEM_WRITE | (__ilog2(CONFIG_SYS_PCI2_MEM_SIZE) - 1));
 
-	pcix2->potar2  = (CFG_PCI2_IO_BASE >> 12) & 0x000fffff;
+	pcix2->potar2  = (CONFIG_SYS_PCI2_IO_BASE >> 12) & 0x000fffff;
 	pcix2->potear2  = 0x00000000;
-	pcix2->powbar2  = (CFG_PCI2_IO_PHYS >> 12) & 0x000fffff;
+	pcix2->powbar2  = (CONFIG_SYS_PCI2_IO_PHYS >> 12) & 0x000fffff;
 	pcix2->powbear2 = 0x00000000;
 	pcix2->powar2 = (POWAR_EN | POWAR_IO_READ |
-			POWAR_IO_WRITE | (__ilog2(CFG_PCI2_IO_SIZE) - 1));
+			POWAR_IO_WRITE | (__ilog2(CONFIG_SYS_PCI2_IO_SIZE) - 1));
 
 	pcix2->pitar1 = 0x00000000;
 	pcix2->piwbar1 = 0x00000000;
@@ -190,15 +190,15 @@ pci_mpc85xx_init(struct pci_controller *board_hose)
 	pcix2->piwar3 = 0;
 
 	pci_set_region(hose->regions + 0,
-		       CFG_PCI2_MEM_BASE,
-		       CFG_PCI2_MEM_PHYS,
-		       CFG_PCI2_MEM_SIZE,
+		       CONFIG_SYS_PCI2_MEM_BASE,
+		       CONFIG_SYS_PCI2_MEM_PHYS,
+		       CONFIG_SYS_PCI2_MEM_SIZE,
 		       PCI_REGION_MEM);
 
 	pci_set_region(hose->regions + 1,
-		       CFG_PCI2_IO_BASE,
-		       CFG_PCI2_IO_PHYS,
-		       CFG_PCI2_IO_SIZE,
+		       CONFIG_SYS_PCI2_IO_BASE,
+		       CONFIG_SYS_PCI2_IO_PHYS,
+		       CONFIG_SYS_PCI2_IO_SIZE,
 		       PCI_REGION_IO);
 
 	hose->region_count = 2;
diff --git a/cpu/mpc85xx/qe_io.c b/cpu/mpc85xx/qe_io.c
index 21ea38b7a..72a29b7b5 100644
--- a/cpu/mpc85xx/qe_io.c
+++ b/cpu/mpc85xx/qe_io.c
@@ -34,7 +34,7 @@ void qe_config_iopin(u8 port, u8 pin, int dir, int open_drain, int assign)
 	u32			pin_2bit_assign;
 	u32			pin_1bit_mask;
 	u32			tmp_val;
-	volatile ccsr_gur_t	*gur = (void *)(CFG_MPC85xx_GUTS_ADDR);
+	volatile ccsr_gur_t	*gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
 	volatile par_io_t	*par_io = (volatile par_io_t *)
 						&(gur->qe_par_io);
 
diff --git a/cpu/mpc85xx/release.S b/cpu/mpc85xx/release.S
index 75676b5b9..7c3e8a172 100644
--- a/cpu/mpc85xx/release.S
+++ b/cpu/mpc85xx/release.S
@@ -24,19 +24,28 @@
 __secondary_start_page:
 /* First do some preliminary setup */
 	lis	r3, HID0_EMCP@h		/* enable machine check */
+#ifndef CONFIG_E500MC
 	ori	r3,r3,HID0_TBEN@l	/* enable Timebase */
+#endif
 #ifdef CONFIG_PHYS_64BIT
 	ori	r3,r3,HID0_ENMAS7@l	/* enable MAS7 updates */
 #endif
 	mtspr	SPRN_HID0,r3
 
+#ifndef CONFIG_E500MC
 	li	r3,(HID1_ASTME|HID1_ABE)@l	/* Addr streaming & broadcast */
 	mtspr	SPRN_HID1,r3
+#endif
 
 	/* Enable branch prediction */
 	li	r3,0x201
 	mtspr	SPRN_BUCSR,r3
 
+	/* Ensure TB is 0 */
+	li	r3,0
+	mttbl	r3
+	mttbu	r3
+
 	/* Enable/invalidate the I-Cache */
 	mfspr	r0,SPRN_L1CSR1
 	ori	r0,r0,(L1CSR1_ICFI|L1CSR1_ICE)
@@ -59,7 +68,11 @@ __secondary_start_page:
 
 	/* r10 has the base address for the entry */
 	mfspr	r0,SPRN_PIR
+#ifdef CONFIG_E500MC
+	rlwinm	r4,r0,27,27,31
+#else
 	mr	r4,r0
+#endif
 	slwi	r8,r4,5
 	add	r10,r3,r8
 
diff --git a/cpu/mpc85xx/serial_scc.c b/cpu/mpc85xx/serial_scc.c
index 7ee3cc823..05fb80875 100644
--- a/cpu/mpc85xx/serial_scc.c
+++ b/cpu/mpc85xx/serial_scc.c
@@ -88,7 +88,7 @@ DECLARE_GLOBAL_DATA_PTR;
 
 int serial_init (void)
 {
-	volatile ccsr_cpm_t *cpm = (ccsr_cpm_t *)CFG_MPC85xx_CPM_ADDR;
+	volatile ccsr_cpm_t *cpm = (ccsr_cpm_t *)CONFIG_SYS_MPC85xx_CPM_ADDR;
 	volatile ccsr_cpm_scc_t *sp;
 	volatile scc_uart_t *up;
 	volatile cbd_t *tbdf, *rbdf;
@@ -201,7 +201,7 @@ serial_putc(const char c)
 {
 	volatile scc_uart_t	*up;
 	volatile cbd_t		*tbdf;
-	volatile ccsr_cpm_t	*cpm = (ccsr_cpm_t *)CFG_MPC85xx_CPM_ADDR;
+	volatile ccsr_cpm_t	*cpm = (ccsr_cpm_t *)CONFIG_SYS_MPC85xx_CPM_ADDR;
 
 	if (c == '\n')
 		serial_putc ('\r');
@@ -234,7 +234,7 @@ serial_getc(void)
 {
 	volatile cbd_t		*rbdf;
 	volatile scc_uart_t	*up;
-	volatile ccsr_cpm_t	*cpm = (ccsr_cpm_t *)CFG_MPC85xx_CPM_ADDR;
+	volatile ccsr_cpm_t	*cpm = (ccsr_cpm_t *)CONFIG_SYS_MPC85xx_CPM_ADDR;
 	unsigned char		c;
 
 	up = (scc_uart_t *)&(cpm->im_dprambase[PROFF_SCC]);
@@ -258,7 +258,7 @@ serial_tstc()
 {
 	volatile cbd_t		*rbdf;
 	volatile scc_uart_t	*up;
-	volatile ccsr_cpm_t	*cpm = (ccsr_cpm_t *)CFG_MPC85xx_CPM_ADDR;
+	volatile ccsr_cpm_t	*cpm = (ccsr_cpm_t *)CONFIG_SYS_MPC85xx_CPM_ADDR;
 
 	up = (scc_uart_t *)&(cpm->im_dprambase[PROFF_SCC]);
 	rbdf = (cbd_t *)&(cpm->im_dprambase[up->scc_genscc.scc_rbase]);
diff --git a/cpu/mpc85xx/speed.c b/cpu/mpc85xx/speed.c
index 1cda1e34e..1e0f4838b 100644
--- a/cpu/mpc85xx/speed.c
+++ b/cpu/mpc85xx/speed.c
@@ -35,7 +35,7 @@ DECLARE_GLOBAL_DATA_PTR;
 
 void get_sys_info (sys_info_t * sysInfo)
 {
-	volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR);
+	volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
 	uint plat_ratio,e500_ratio,half_freqSystemBus;
 
 	plat_ratio = (gur->porpllsr) & 0x0000003e;
@@ -54,7 +54,8 @@ void get_sys_info (sys_info_t * sysInfo)
 
 #ifdef CONFIG_DDR_CLK_FREQ
 	{
-		u32 ddr_ratio = ((gur->porpllsr) & 0x00003e00) >> 9;
+		u32 ddr_ratio = ((gur->porpllsr) & MPC85xx_PORPLLSR_DDR_RATIO)
+			>> MPC85xx_PORPLLSR_DDR_RATIO_SHIFT;
 		if (ddr_ratio != 0x7)
 			sysInfo->freqDDRBus = ddr_ratio * CONFIG_DDR_CLK_FREQ;
 	}
@@ -66,10 +67,10 @@ int get_clocks (void)
 {
 	sys_info_t sys_info;
 #ifdef CONFIG_MPC8544
-	volatile ccsr_gur_t *gur = (void *) CFG_MPC85xx_GUTS_ADDR;
+	volatile ccsr_gur_t *gur = (void *) CONFIG_SYS_MPC85xx_GUTS_ADDR;
 #endif
 #if defined(CONFIG_CPM2)
-	volatile ccsr_cpm_t *cpm = (ccsr_cpm_t *)CFG_MPC85xx_CPM_ADDR;
+	volatile ccsr_cpm_t *cpm = (ccsr_cpm_t *)CONFIG_SYS_MPC85xx_CPM_ADDR;
 	uint sccr, dfbrg;
 
 	/* set VCO = 4 * BRG */
diff --git a/cpu/mpc85xx/start.S b/cpu/mpc85xx/start.S
index 10fe93629..8fa0ff7a8 100644
--- a/cpu/mpc85xx/start.S
+++ b/cpu/mpc85xx/start.S
@@ -30,6 +30,7 @@
 
 #include <config.h>
 #include <mpc85xx.h>
+#include <timestamp.h>
 #include <version.h>
 
 #define _LINUX_CONFIG_H 1	/* avoid reading Linux autoconf.h file	*/
@@ -163,8 +164,10 @@ _start_e500:
 	ori	r0,r0,HID0_TBEN@l	/* Enable Timebase */
 	mtspr	HID0,r0
 
+#ifndef CONFIG_E500MC
 	li	r0,(HID1_ASTME|HID1_ABE)@l	/* Addr streaming & broadcast */
 	mtspr	HID1,r0
+#endif
 
 	/* Enable Branch Prediction */
 #if defined(CONFIG_BTB)
@@ -172,12 +175,12 @@ _start_e500:
 	mtspr	BUCSR,r0
 #endif
 
-#if defined(CFG_INIT_DBCR)
+#if defined(CONFIG_SYS_INIT_DBCR)
 	lis	r1,0xffff
 	ori	r1,r1,0xffff
 	mtspr	DBSR,r1			/* Clear all status bits */
-	lis	r0,CFG_INIT_DBCR@h	/* DBCR0[IDM] must be set */
-	ori	r0,r0,CFG_INIT_DBCR@l
+	lis	r0,CONFIG_SYS_INIT_DBCR@h	/* DBCR0[IDM] must be set */
+	ori	r0,r0,CONFIG_SYS_INIT_DBCR@l
 	mtspr	DBCR0,r0
 #endif
 
@@ -210,11 +213,11 @@ _start_e500:
 	lis     r7,FSL_BOOKE_MAS1(1, 1, 0, 1, BOOKE_PAGESZ_16K)@h
 	ori     r7,r7,FSL_BOOKE_MAS1(1, 1, 0, 1, BOOKE_PAGESZ_16K)@l
 
-	lis     r8,FSL_BOOKE_MAS2(CFG_INIT_RAM_ADDR, 0)@h
-	ori     r8,r8,FSL_BOOKE_MAS2(CFG_INIT_RAM_ADDR, 0)@l
+	lis     r8,FSL_BOOKE_MAS2(CONFIG_SYS_INIT_RAM_ADDR, 0)@h
+	ori     r8,r8,FSL_BOOKE_MAS2(CONFIG_SYS_INIT_RAM_ADDR, 0)@l
 
-	lis     r9,FSL_BOOKE_MAS3(CFG_INIT_RAM_ADDR, 0, (MAS3_SX|MAS3_SW|MAS3_SR))@h
-	ori     r9,r9,FSL_BOOKE_MAS3(CFG_INIT_RAM_ADDR, 0, (MAS3_SX|MAS3_SW|MAS3_SR))@l
+	lis     r9,FSL_BOOKE_MAS3(CONFIG_SYS_INIT_RAM_ADDR, 0, (MAS3_SX|MAS3_SW|MAS3_SR))@h
+	ori     r9,r9,FSL_BOOKE_MAS3(CONFIG_SYS_INIT_RAM_ADDR, 0, (MAS3_SX|MAS3_SW|MAS3_SR))@l
 
 	mtspr   MAS0,r6
 	mtspr   MAS1,r7
@@ -238,8 +241,8 @@ switch_as:
 
 	/* Allocate Initial RAM in data cache.
 	 */
-	lis	r3,CFG_INIT_RAM_ADDR@h
-	ori	r3,r3,CFG_INIT_RAM_ADDR@l
+	lis	r3,CONFIG_SYS_INIT_RAM_ADDR@h
+	ori	r3,r3,CONFIG_SYS_INIT_RAM_ADDR@l
 	mfspr	r2, L1CFG0
 	andi.	r2, r2, 0x1ff
 	/* cache size * 1024 / (2 * L1 line size) */
@@ -249,17 +252,17 @@ switch_as:
 1:
 	dcbz	r0,r3
 	dcbtls	0,r0,r3
-	addi	r3,r3,CFG_CACHELINE_SIZE
+	addi	r3,r3,CONFIG_SYS_CACHELINE_SIZE
 	bdnz	1b
 
 	/* Jump out the last 4K page and continue to 'normal' start */
-#ifdef CFG_RAMBOOT
+#ifdef CONFIG_SYS_RAMBOOT
 	b	_start_cont
 #else
 	/* Calculate absolute address in FLASH and jump there		*/
 	/*--------------------------------------------------------------*/
-	lis	r3,CFG_MONITOR_BASE@h
-	ori	r3,r3,CFG_MONITOR_BASE@l
+	lis	r3,CONFIG_SYS_MONITOR_BASE@h
+	ori	r3,r3,CONFIG_SYS_MONITOR_BASE@l
 	addi	r3,r3,_start_cont - _start + _START_OFFSET
 	mtlr	r3
 	blr
@@ -272,15 +275,15 @@ _start:
 	.globl	version_string
 version_string:
 	.ascii U_BOOT_VERSION
-	.ascii " (", __DATE__, " - ", __TIME__, ")"
+	.ascii " (", U_BOOT_DATE, " - ", U_BOOT_TIME, ")"
 	.ascii CONFIG_IDENT_STRING, "\0"
 
 	.align	4
 	.globl	_start_cont
 _start_cont:
 	/* Setup the stack in initial RAM,could be L2-as-SRAM or L1 dcache*/
-	lis	r1,CFG_INIT_RAM_ADDR@h
-	ori	r1,r1,CFG_INIT_SP_OFFSET@l
+	lis	r1,CONFIG_SYS_INIT_RAM_ADDR@h
+	ori	r1,r1,CONFIG_SYS_INIT_SP_OFFSET@l
 
 	li	r0,0
 	stwu	r0,-4(r1)
@@ -565,6 +568,7 @@ mck_return:
 
 /* Cache functions.
 */
+.globl invalidate_icache
 invalidate_icache:
 	mfspr	r0,L1CSR1
 	ori	r0,r0,L1CSR1_ICFI
@@ -574,6 +578,7 @@ invalidate_icache:
 	isync
 	blr				/* entire I cache */
 
+.globl invalidate_dcache
 invalidate_dcache:
 	mfspr	r0,L1CSR0
 	ori	r0,r0,L1CSR0_DCFI
@@ -778,16 +783,16 @@ relocate_code:
 	mr	r10,r5		/* Save copy of Destination Address	*/
 
 	mr	r3,r5				/* Destination Address	*/
-	lis	r4,CFG_MONITOR_BASE@h		/* Source      Address	*/
-	ori	r4,r4,CFG_MONITOR_BASE@l
+	lis	r4,CONFIG_SYS_MONITOR_BASE@h		/* Source      Address	*/
+	ori	r4,r4,CONFIG_SYS_MONITOR_BASE@l
 	lwz	r5,GOT(__init_end)
 	sub	r5,r5,r4
-	li	r6,CFG_CACHELINE_SIZE		/* Cache Line Size	*/
+	li	r6,CONFIG_SYS_CACHELINE_SIZE		/* Cache Line Size	*/
 
 	/*
 	 * Fix GOT pointer:
 	 *
-	 * New GOT-PTR = (old GOT-PTR - CFG_MONITOR_BASE) + Destination Address
+	 * New GOT-PTR = (old GOT-PTR - CONFIG_SYS_MONITOR_BASE) + Destination Address
 	 *
 	 * Offset:
 	 */
@@ -996,20 +1001,20 @@ trap_reloc:
 .globl unlock_ram_in_cache
 unlock_ram_in_cache:
 	/* invalidate the INIT_RAM section */
-	lis	r3,(CFG_INIT_RAM_ADDR & ~31)@h
-	ori	r3,r3,(CFG_INIT_RAM_ADDR & ~31)@l
+	lis	r3,(CONFIG_SYS_INIT_RAM_ADDR & ~(CONFIG_SYS_CACHELINE_SIZE-1))@h
+	ori	r3,r3,(CONFIG_SYS_INIT_RAM_ADDR & ~(CONFIG_SYS_CACHELINE_SIZE-1))@l
 	mfspr	r4,L1CFG0
 	andi.	r4,r4,0x1ff
 	slwi	r4,r4,(10 - 1 - L1_CACHE_SHIFT)
 	mtctr	r4
 1:	dcbi	r0,r3
-	addi	r3,r3,CFG_CACHELINE_SIZE
+	addi	r3,r3,CONFIG_SYS_CACHELINE_SIZE
 	bdnz	1b
 	sync
 
 	/* Invalidate the TLB entries for the cache */
-	lis	r3,CFG_INIT_RAM_ADDR@h
-	ori	r3,r3,CFG_INIT_RAM_ADDR@l
+	lis	r3,CONFIG_SYS_INIT_RAM_ADDR@h
+	ori	r3,r3,CONFIG_SYS_INIT_RAM_ADDR@l
 	tlbivax	0,r3
 	addi	r3,r3,0x1000
 	tlbivax	0,r3
@@ -1019,3 +1024,50 @@ unlock_ram_in_cache:
 	tlbivax	0,r3
 	isync
 	blr
+
+.globl flush_dcache
+flush_dcache:
+	mfspr	r3,SPRN_L1CFG0
+
+	rlwinm	r5,r3,9,3	/* Extract cache block size */
+	twlgti	r5,1		/* Only 32 and 64 byte cache blocks
+				 * are currently defined.
+				 */
+	li	r4,32
+	subfic	r6,r5,2		/* r6 = log2(1KiB / cache block size) -
+				 *      log2(number of ways)
+				 */
+	slw	r5,r4,r5	/* r5 = cache block size */
+
+	rlwinm	r7,r3,0,0xff	/* Extract number of KiB in the cache */
+	mulli	r7,r7,13	/* An 8-way cache will require 13
+				 * loads per set.
+				 */
+	slw	r7,r7,r6
+
+	/* save off HID0 and set DCFA */
+	mfspr	r8,SPRN_HID0
+	ori	r9,r8,HID0_DCFA@l
+	mtspr	SPRN_HID0,r9
+	isync
+
+	lis	r4,0
+	mtctr	r7
+
+1:	lwz	r3,0(r4)	/* Load... */
+	add	r4,r4,r5
+	bdnz	1b
+
+	msync
+	lis	r4,0
+	mtctr	r7
+
+1:	dcbf	0,r4		/* ...and flush. */
+	add	r4,r4,r5
+	bdnz	1b
+
+	/* restore HID0 */
+	mtspr	SPRN_HID0,r8
+	isync
+
+	blr
diff --git a/cpu/mpc85xx/tlb.c b/cpu/mpc85xx/tlb.c
index 7ce7a14b8..a2d16ae2f 100644
--- a/cpu/mpc85xx/tlb.c
+++ b/cpu/mpc85xx/tlb.c
@@ -138,7 +138,7 @@ unsigned int setup_ddr_tlbs(unsigned int memsize_in_meg)
 	 * Starting at TLB1 8, use no more than 8 TLB1 entries.
 	 */
 	ram_tlb_index = 8;
-	ram_tlb_address = (unsigned int)CFG_DDR_SDRAM_BASE;
+	ram_tlb_address = (unsigned int)CONFIG_SYS_DDR_SDRAM_BASE;
 	while (ram_tlb_address < (memsize_in_meg * 1024 * 1024)
 	      && ram_tlb_index < 16) {
 		set_tlb(1, ram_tlb_address, ram_tlb_address,
diff --git a/cpu/mpc85xx/traps.c b/cpu/mpc85xx/traps.c
index 0eab69448..1045cc1e7 100644
--- a/cpu/mpc85xx/traps.c
+++ b/cpu/mpc85xx/traps.c
@@ -290,7 +290,7 @@ UnknownException(struct pt_regs *regs)
 void
 ExtIntException(struct pt_regs *regs)
 {
-	volatile ccsr_pic_t *pic = (void *)(CFG_MPC85xx_PIC_ADDR);
+	volatile ccsr_pic_t *pic = (void *)(CONFIG_SYS_MPC85xx_PIC_ADDR);
 
 	uint vect;
 
diff --git a/cpu/mpc86xx/Makefile b/cpu/mpc86xx/Makefile
index a9767adeb..34a975556 100644
--- a/cpu/mpc86xx/Makefile
+++ b/cpu/mpc86xx/Makefile
@@ -31,6 +31,10 @@ LIB	= $(obj)lib$(CPU).a
 START	= start.o
 SOBJS	= cache.o
 
+ifneq ($(CONFIG_NUM_CPUS),1)
+COBJS-y += mp.o
+SOBJS += release.o
+endif
 COBJS-y	+= traps.o
 COBJS-y	+= cpu.o
 COBJS-y	+= cpu_init.o
diff --git a/cpu/mpc86xx/cache.S b/cpu/mpc86xx/cache.S
index 80ff68889..0bb058b04 100644
--- a/cpu/mpc86xx/cache.S
+++ b/cpu/mpc86xx/cache.S
@@ -53,7 +53,7 @@ _GLOBAL(invalidate_l1_data_cache)
 /*
  * Flush data cache.
  */
-_GLOBAL(flush_data_cache)
+_GLOBAL(flush_dcache)
 	lis	r3,0
 	lis	r5,CACHE_LINE_SIZE
 flush:
@@ -279,7 +279,7 @@ _GLOBAL(dcache_enable)
 	mtspr	HID0, r5		/* enable + invalidate */
 	mtspr	HID0, r3		/* enable */
 	sync
-#ifdef CFG_L2
+#ifdef CONFIG_SYS_L2
 	mflr	r5
 	bl	l2cache_enable		/* uses r3 and r4 */
 	sync
@@ -290,12 +290,12 @@ _GLOBAL(dcache_enable)
 
 /*
  * Disable data cache(s) - L1 and optionally L2
- * Calls flush_data_cache and l2cache_disable_no_flush.
+ * Calls flush_dcache and l2cache_disable_no_flush.
  * LR saved in r4
  */
 _GLOBAL(dcache_disable)
 	mflr	r4			/* save link register */
-	bl	flush_data_cache	/* uses r3 and r5 */
+	bl	flush_dcache	/* uses r3 and r5 */
 	sync
 	mfspr	r3, HID0
 	li	r5, HID0_DCFI|HID0_DLOCK
@@ -305,7 +305,7 @@ _GLOBAL(dcache_disable)
 	andc	r3, r3, r5		/* no enable, no invalidate */
 	mtspr	HID0, r3
 	sync
-#ifdef CFG_L2
+#ifdef CONFIG_SYS_L2
 	bl	l2cache_disable_no_flush /* uses r3 */
 #endif
 	mtlr	r4			/* restore link register */
@@ -363,11 +363,11 @@ _GLOBAL(l2cache_enable)
 
 /*
  * Disable L2 cache
- * Calls flush_data_cache. LR is saved in r4
+ * Calls flush_dcache. LR is saved in r4
  */
 _GLOBAL(l2cache_disable)
 	mflr	r4			/* save link register */
-	bl	flush_data_cache	/* uses r3 and r5 */
+	bl	flush_dcache		/* uses r3 and r5 */
 	sync
 	mtlr	r4			/* restore link register */
 l2cache_disable_no_flush:		/* provide way to disable L2 w/o flushing */
diff --git a/cpu/mpc86xx/cpu.c b/cpu/mpc86xx/cpu.c
index ecea5b064..4cace984d 100644
--- a/cpu/mpc86xx/cpu.c
+++ b/cpu/mpc86xx/cpu.c
@@ -28,6 +28,7 @@
 #include <asm/cache.h>
 #include <asm/mmu.h>
 #include <mpc86xx.h>
+#include <tsec.h>
 #include <asm/fsl_law.h>
 
 
@@ -40,7 +41,7 @@ checkcpu(void)
 	uint major, minor;
 	uint lcrr;		/* local bus clock ratio register */
 	uint clkdiv;		/* clock divider portion of lcrr */
-	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
 	volatile ccsr_gur_t *gur = &immap->im_gur;
 
 	puts("Freescale PowerPC\n");
@@ -99,11 +100,11 @@ checkcpu(void)
 	printf("MPX:%4lu MHz, ", sysinfo.freqSystemBus / 1000000);
 	printf("DDR:%4lu MHz, ", sysinfo.freqSystemBus / 2000000);
 
-#if defined(CFG_LBC_LCRR)
-	lcrr = CFG_LBC_LCRR;
+#if defined(CONFIG_SYS_LBC_LCRR)
+	lcrr = CONFIG_SYS_LBC_LCRR;
 #else
 	{
-		volatile immap_t *immap = (immap_t *) CFG_IMMR;
+		volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
 		volatile ccsr_lbc_t *lbc = &immap->im_lbc;
 
 		lcrr = lbc->lcrr;
@@ -160,16 +161,16 @@ do_reset(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 {
 #if !defined(CONFIG_MPC8641HPCN) && !defined(CONFIG_MPC8610HPCD)
 
-#ifdef CFG_RESET_ADDRESS
-	ulong addr = CFG_RESET_ADDRESS;
+#ifdef CONFIG_SYS_RESET_ADDRESS
+	ulong addr = CONFIG_SYS_RESET_ADDRESS;
 #else
 	/*
-	 * note: when CFG_MONITOR_BASE points to a RAM address,
-	 * CFG_MONITOR_BASE - sizeof (ulong) is usually a valid
+	 * note: when CONFIG_SYS_MONITOR_BASE points to a RAM address,
+	 * CONFIG_SYS_MONITOR_BASE - sizeof (ulong) is usually a valid
 	 * address. Better pick an address known to be invalid on your
-	 * system and assign it to CFG_RESET_ADDRESS.
+	 * system and assign it to CONFIG_SYS_RESET_ADDRESS.
 	 */
-	ulong addr = CFG_MONITOR_BASE - sizeof(ulong);
+	ulong addr = CONFIG_SYS_MONITOR_BASE - sizeof(ulong);
 #endif
 
 	/* flush and disable I/D cache */
@@ -218,7 +219,7 @@ watchdog_reset(void)
 	/*
 	 * This actually feed the hard enabled watchdog.
 	 */
-	volatile immap_t *immap = (immap_t *)CFG_IMMR;
+	volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR;
 	volatile ccsr_wdt_t *wdt = &immap->im_wdt;
 	volatile ccsr_gur_t *gur = &immap->im_gur;
 	u32 tmp = gur->pordevsr;
@@ -236,7 +237,7 @@ watchdog_reset(void)
 void
 dma_init(void)
 {
-	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
 	volatile ccsr_dma_t *dma = &immap->im_dma;
 
 	dma->satr0 = 0x00040000;
@@ -247,7 +248,7 @@ dma_init(void)
 uint
 dma_check(void)
 {
-	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
 	volatile ccsr_dma_t *dma = &immap->im_dma;
 	volatile uint status = dma->sr0;
 
@@ -265,7 +266,7 @@ dma_check(void)
 int
 dma_xfer(void *dest, uint count, void *src)
 {
-	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
 	volatile ccsr_dma_t *dma = &immap->im_dma;
 
 	dma->dar0 = (uint) dest;
@@ -287,7 +288,7 @@ dma_xfer(void *dest, uint count, void *src)
  */
 void mpc86xx_reginfo(void)
 {
-	immap_t *immap = (immap_t *)CFG_IMMR;
+	immap_t *immap = (immap_t *)CONFIG_SYS_IMMR;
 	ccsr_lbc_t *lbc = &immap->im_lbc;
 
 	print_bats();
@@ -305,28 +306,15 @@ void mpc86xx_reginfo(void)
 
 }
 
-#ifdef CONFIG_TSEC_ENET
-/* Default initializations for TSEC controllers.  To override,
- * create a board-specific function called:
- * 	int board_eth_init(bd_t *bis)
+/*
+ * Initializes on-chip ethernet controllers.
+ * to override, implement board_eth_init()
  */
-
-extern int tsec_initialize(bd_t * bis, int index, char *devname);
-
 int cpu_eth_init(bd_t *bis)
 {
-#if defined(CONFIG_TSEC1)
-	tsec_initialize(bis, 0, CONFIG_TSEC1_NAME);
-#endif
-#if defined(CONFIG_TSEC2)
-	tsec_initialize(bis, 1, CONFIG_TSEC2_NAME);
-#endif
-#if defined(CONFIG_TSEC3)
-	tsec_initialize(bis, 2, CONFIG_TSEC3_NAME);
-#endif
-#if defined(CONFIG_TSEC4)
-	tsec_initialize(bis, 3, CONFIG_TSEC4_NAME);
+#if defined(CONFIG_TSEC_ENET)
+	tsec_standard_init(bis);
 #endif
+
 	return 0;
 }
-#endif /* CONFIG_TSEC_ENET */
diff --git a/cpu/mpc86xx/cpu_init.c b/cpu/mpc86xx/cpu_init.c
index 1fda3fe80..a7e6036db 100644
--- a/cpu/mpc86xx/cpu_init.c
+++ b/cpu/mpc86xx/cpu_init.c
@@ -31,6 +31,9 @@
 #include <mpc86xx.h>
 #include <asm/mmu.h>
 #include <asm/fsl_law.h>
+#include "mp.h"
+
+void setup_bats(void);
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -43,11 +46,11 @@ DECLARE_GLOBAL_DATA_PTR;
 
 void cpu_init_f(void)
 {
-	volatile immap_t    *immap = (immap_t *)CFG_IMMR;
+	volatile immap_t    *immap = (immap_t *)CONFIG_SYS_IMMR;
 	volatile ccsr_lbc_t *memctl = &immap->im_lbc;
 
 	/* Pointer is writable since we allocated a register for it */
-	gd = (gd_t *) (CFG_INIT_RAM_ADDR + CFG_GBL_DATA_OFFSET);
+	gd = (gd_t *) (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET);
 
 	/* Clear initial global data */
 	memset ((void *) gd, 0, sizeof (gd_t));
@@ -56,57 +59,59 @@ void cpu_init_f(void)
 	init_laws();
 #endif
 
+	setup_bats();
+
 	/* Map banks 0 and 1 to the FLASH banks 0 and 1 at preliminary
 	 * addresses - these have to be modified later when FLASH size
 	 * has been determined
 	 */
 
-#if defined(CFG_OR0_REMAP)
-	memctl->or0 = CFG_OR0_REMAP;
+#if defined(CONFIG_SYS_OR0_REMAP)
+	memctl->or0 = CONFIG_SYS_OR0_REMAP;
 #endif
-#if defined(CFG_OR1_REMAP)
-	memctl->or1 = CFG_OR1_REMAP;
+#if defined(CONFIG_SYS_OR1_REMAP)
+	memctl->or1 = CONFIG_SYS_OR1_REMAP;
 #endif
 
 	/* now restrict to preliminary range */
-#if defined(CFG_BR0_PRELIM) && defined(CFG_OR0_PRELIM)
-	memctl->br0 = CFG_BR0_PRELIM;
-	memctl->or0 = CFG_OR0_PRELIM;
+#if defined(CONFIG_SYS_BR0_PRELIM) && defined(CONFIG_SYS_OR0_PRELIM)
+	memctl->br0 = CONFIG_SYS_BR0_PRELIM;
+	memctl->or0 = CONFIG_SYS_OR0_PRELIM;
 #endif
 
-#if defined(CFG_BR1_PRELIM) && defined(CFG_OR1_PRELIM)
-	memctl->or1 = CFG_OR1_PRELIM;
-	memctl->br1 = CFG_BR1_PRELIM;
+#if defined(CONFIG_SYS_BR1_PRELIM) && defined(CONFIG_SYS_OR1_PRELIM)
+	memctl->or1 = CONFIG_SYS_OR1_PRELIM;
+	memctl->br1 = CONFIG_SYS_BR1_PRELIM;
 #endif
 
-#if defined(CFG_BR2_PRELIM) && defined(CFG_OR2_PRELIM)
-	memctl->or2 = CFG_OR2_PRELIM;
-	memctl->br2 = CFG_BR2_PRELIM;
+#if defined(CONFIG_SYS_BR2_PRELIM) && defined(CONFIG_SYS_OR2_PRELIM)
+	memctl->or2 = CONFIG_SYS_OR2_PRELIM;
+	memctl->br2 = CONFIG_SYS_BR2_PRELIM;
 #endif
 
-#if defined(CFG_BR3_PRELIM) && defined(CFG_OR3_PRELIM)
-	memctl->or3 = CFG_OR3_PRELIM;
-	memctl->br3 = CFG_BR3_PRELIM;
+#if defined(CONFIG_SYS_BR3_PRELIM) && defined(CONFIG_SYS_OR3_PRELIM)
+	memctl->or3 = CONFIG_SYS_OR3_PRELIM;
+	memctl->br3 = CONFIG_SYS_BR3_PRELIM;
 #endif
 
-#if defined(CFG_BR4_PRELIM) && defined(CFG_OR4_PRELIM)
-	memctl->or4 = CFG_OR4_PRELIM;
-	memctl->br4 = CFG_BR4_PRELIM;
+#if defined(CONFIG_SYS_BR4_PRELIM) && defined(CONFIG_SYS_OR4_PRELIM)
+	memctl->or4 = CONFIG_SYS_OR4_PRELIM;
+	memctl->br4 = CONFIG_SYS_BR4_PRELIM;
 #endif
 
-#if defined(CFG_BR5_PRELIM) && defined(CFG_OR5_PRELIM)
-	memctl->or5 = CFG_OR5_PRELIM;
-	memctl->br5 = CFG_BR5_PRELIM;
+#if defined(CONFIG_SYS_BR5_PRELIM) && defined(CONFIG_SYS_OR5_PRELIM)
+	memctl->or5 = CONFIG_SYS_OR5_PRELIM;
+	memctl->br5 = CONFIG_SYS_BR5_PRELIM;
 #endif
 
-#if defined(CFG_BR6_PRELIM) && defined(CFG_OR6_PRELIM)
-	memctl->or6 = CFG_OR6_PRELIM;
-	memctl->br6 = CFG_BR6_PRELIM;
+#if defined(CONFIG_SYS_BR6_PRELIM) && defined(CONFIG_SYS_OR6_PRELIM)
+	memctl->or6 = CONFIG_SYS_OR6_PRELIM;
+	memctl->br6 = CONFIG_SYS_BR6_PRELIM;
 #endif
 
-#if defined(CFG_BR7_PRELIM) && defined(CFG_OR7_PRELIM)
-	memctl->or7 = CFG_OR7_PRELIM;
-	memctl->br7 = CFG_BR7_PRELIM;
+#if defined(CONFIG_SYS_BR7_PRELIM) && defined(CONFIG_SYS_OR7_PRELIM)
+	memctl->or7 = CONFIG_SYS_OR7_PRELIM;
+	memctl->br7 = CONFIG_SYS_BR7_PRELIM;
 #endif
 
 	/* enable the timebase bit in HID0 */
@@ -121,28 +126,31 @@ void cpu_init_f(void)
  */
 int cpu_init_r(void)
 {
+#if (CONFIG_NUM_CPUS > 1)
+	setup_mp();
+#endif
 	return 0;
 }
 
 /* Set up BAT registers */
 void setup_bats(void)
 {
-	write_bat(DBAT0, CFG_DBAT0U, CFG_DBAT0L);
-	write_bat(IBAT0, CFG_IBAT0U, CFG_IBAT0L);
-	write_bat(DBAT1, CFG_DBAT1U, CFG_DBAT1L);
-	write_bat(IBAT1, CFG_IBAT1U, CFG_IBAT1L);
-	write_bat(DBAT2, CFG_DBAT2U, CFG_DBAT2L);
-	write_bat(IBAT2, CFG_IBAT2U, CFG_IBAT2L);
-	write_bat(DBAT3, CFG_DBAT3U, CFG_DBAT3L);
-	write_bat(IBAT3, CFG_IBAT3U, CFG_IBAT3L);
-	write_bat(DBAT4, CFG_DBAT4U, CFG_DBAT4L);
-	write_bat(IBAT4, CFG_IBAT4U, CFG_IBAT4L);
-	write_bat(DBAT5, CFG_DBAT5U, CFG_DBAT5L);
-	write_bat(IBAT5, CFG_IBAT5U, CFG_IBAT5L);
-	write_bat(DBAT6, CFG_DBAT6U, CFG_DBAT6L);
-	write_bat(IBAT6, CFG_IBAT6U, CFG_IBAT6L);
-	write_bat(DBAT7, CFG_DBAT7U, CFG_DBAT7L);
-	write_bat(IBAT7, CFG_IBAT7U, CFG_IBAT7L);
+	write_bat(DBAT0, CONFIG_SYS_DBAT0U, CONFIG_SYS_DBAT0L);
+	write_bat(IBAT0, CONFIG_SYS_IBAT0U, CONFIG_SYS_IBAT0L);
+	write_bat(DBAT1, CONFIG_SYS_DBAT1U, CONFIG_SYS_DBAT1L);
+	write_bat(IBAT1, CONFIG_SYS_IBAT1U, CONFIG_SYS_IBAT1L);
+	write_bat(DBAT2, CONFIG_SYS_DBAT2U, CONFIG_SYS_DBAT2L);
+	write_bat(IBAT2, CONFIG_SYS_IBAT2U, CONFIG_SYS_IBAT2L);
+	write_bat(DBAT3, CONFIG_SYS_DBAT3U, CONFIG_SYS_DBAT3L);
+	write_bat(IBAT3, CONFIG_SYS_IBAT3U, CONFIG_SYS_IBAT3L);
+	write_bat(DBAT4, CONFIG_SYS_DBAT4U, CONFIG_SYS_DBAT4L);
+	write_bat(IBAT4, CONFIG_SYS_IBAT4U, CONFIG_SYS_IBAT4L);
+	write_bat(DBAT5, CONFIG_SYS_DBAT5U, CONFIG_SYS_DBAT5L);
+	write_bat(IBAT5, CONFIG_SYS_IBAT5U, CONFIG_SYS_IBAT5L);
+	write_bat(DBAT6, CONFIG_SYS_DBAT6U, CONFIG_SYS_DBAT6L);
+	write_bat(IBAT6, CONFIG_SYS_IBAT6U, CONFIG_SYS_IBAT6L);
+	write_bat(DBAT7, CONFIG_SYS_DBAT7U, CONFIG_SYS_DBAT7L);
+	write_bat(IBAT7, CONFIG_SYS_IBAT7U, CONFIG_SYS_IBAT7L);
 
 	return;
 }
diff --git a/cpu/mpc86xx/ddr-8641.c b/cpu/mpc86xx/ddr-8641.c
index f9361820a..51d0102ce 100644
--- a/cpu/mpc86xx/ddr-8641.c
+++ b/cpu/mpc86xx/ddr-8641.c
@@ -22,10 +22,10 @@ void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs,
 
 	switch (ctrl_num) {
 	case 0:
-		ddr = (void *)CFG_MPC86xx_DDR_ADDR;
+		ddr = (void *)CONFIG_SYS_MPC86xx_DDR_ADDR;
 		break;
 	case 1:
-		ddr = (void *)CFG_MPC86xx_DDR2_ADDR;
+		ddr = (void *)CONFIG_SYS_MPC86xx_DDR2_ADDR;
 		break;
 	default:
 		printf("%s unexpected ctrl_num = %u\n", __FUNCTION__, ctrl_num);
diff --git a/cpu/mpc86xx/fdt.c b/cpu/mpc86xx/fdt.c
index 12d905203..3adfad98c 100644
--- a/cpu/mpc86xx/fdt.c
+++ b/cpu/mpc86xx/fdt.c
@@ -9,9 +9,17 @@
 #include <common.h>
 #include <libfdt.h>
 #include <fdt_support.h>
+#include "mp.h"
+
+DECLARE_GLOBAL_DATA_PTR;
 
 void ft_cpu_setup(void *blob, bd_t *bd)
 {
+#if (CONFIG_NUM_CPUS > 1)
+	int off;
+	u32 bootpg;
+#endif
+
 	do_fixup_by_prop_u32(blob, "device_type", "cpu", 4,
 			     "timebase-frequency", bd->bi_busfreq / 4, 1);
 	do_fixup_by_prop_u32(blob, "device_type", "cpu", 4,
@@ -28,8 +36,21 @@ void ft_cpu_setup(void *blob, bd_t *bd)
 	fdt_fixup_ethernet(blob);
 #endif
 
-#ifdef CFG_NS16550
+#ifdef CONFIG_SYS_NS16550
 	do_fixup_by_compat_u32(blob, "ns16550",
-			       "clock-frequency", CFG_NS16550_CLK, 1);
+			       "clock-frequency", CONFIG_SYS_NS16550_CLK, 1);
+#endif
+
+#if (CONFIG_NUM_CPUS > 1)
+	/* if we have 4G or more of memory, put the boot page at 4Gb-1M */
+	if (gd->ram_size > 0xfffff000)
+		bootpg = 0xfff00000;
+	else
+		bootpg = gd->ram_size - (1024 * 1024);
+
+	/* Reserve the boot page so OSes dont use it */
+	off = fdt_add_mem_rsv(blob, bootpg, (u64)4096);
+	if (off < 0)
+		printf("%s: %s\n", __FUNCTION__, fdt_strerror(off));
 #endif
 }
diff --git a/cpu/mpc86xx/interrupts.c b/cpu/mpc86xx/interrupts.c
index f16744bfd..c78fc7225 100644
--- a/cpu/mpc86xx/interrupts.c
+++ b/cpu/mpc86xx/interrupts.c
@@ -35,78 +35,23 @@
 #include <mpc86xx.h>
 #include <command.h>
 #include <asm/processor.h>
-#include <ppc_asm.tmpl>
-#include <watchdog.h>
 
-unsigned long decrementer_count;    /* count value for 1e6/HZ microseconds */
-unsigned long timestamp;
-
-
-static __inline__ unsigned long get_msr(void)
-{
-	unsigned long msr;
-
-	asm volatile ("mfmsr %0":"=r" (msr):);
-
-	return msr;
-}
-
-static __inline__ void set_msr(unsigned long msr)
-{
-	asm volatile ("mtmsr %0"::"r" (msr));
-}
-
-static __inline__ unsigned long get_dec(void)
-{
-	unsigned long val;
-
-	asm volatile ("mfdec %0":"=r" (val):);
-
-	return val;
-}
-
-static __inline__ void set_dec(unsigned long val)
-{
-	if (val)
-		asm volatile ("mtdec %0"::"r" (val));
-}
-
-/* interrupt is not supported yet */
 int interrupt_init_cpu(unsigned long *decrementer_count)
 {
-	return 0;
-}
-
-int interrupt_init(void)
-{
-	int ret;
-
-	volatile immap_t *immr = (immap_t *)CFG_IMMR;
-	immr->im_pic.gcr = MPC86xx_PICGCR_RST;
-	while (immr->im_pic.gcr & MPC86xx_PICGCR_RST);
-	immr->im_pic.gcr = MPC86xx_PICGCR_MODE;
-
-	/* call cpu specific function from $(CPU)/interrupts.c */
-	ret = interrupt_init_cpu(&decrementer_count);
+	volatile immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
+	volatile ccsr_pic_t *pic = &immr->im_pic;
 
-	if (ret)
-		return ret;
+	pic->gcr = MPC86xx_PICGCR_RST;
+	while (pic->gcr & MPC86xx_PICGCR_RST)
+		;
+	pic->gcr = MPC86xx_PICGCR_MODE;
 
-	decrementer_count = get_tbclk() / CFG_HZ;
+	*decrementer_count = get_tbclk() / CONFIG_SYS_HZ;
 	debug("interrupt init: tbclk() = %d MHz, decrementer_count = %ld\n",
 	      (get_tbclk() / 1000000),
-	      decrementer_count);
-
-	set_dec(decrementer_count);
-
-	set_msr(get_msr() | MSR_EE);
-
-	debug("MSR = 0x%08lx, Decrementer reg = 0x%08lx\n",
-	      get_msr(),
-	      get_dec());
+	      *decrementer_count);
 
 #ifdef CONFIG_INTERRUPTS
-	volatile ccsr_pic_t *pic = &immr->im_pic;
 
 	pic->iivpr1 = 0x810001;	/* 50220 enable mcm interrupts */
 	debug("iivpr1@%x = %x\n", &pic->iivpr1, pic->iivpr1);
@@ -132,25 +77,6 @@ int interrupt_init(void)
 	return 0;
 }
 
-void enable_interrupts(void)
-{
-	set_msr(get_msr() | MSR_EE);
-}
-
-/* returns flag if MSR_EE was set before */
-int disable_interrupts(void)
-{
-	ulong msr = get_msr();
-
-	set_msr(msr & ~MSR_EE);
-	return (msr & MSR_EE) != 0;
-}
-
-void increment_timestamp(void)
-{
-	timestamp++;
-}
-
 /*
  * timer_interrupt - gets called when the decrementer overflows,
  * with interrupts disabled.
@@ -161,50 +87,9 @@ void timer_interrupt_cpu(struct pt_regs *regs)
 	/* nothing to do here */
 }
 
-void timer_interrupt(struct pt_regs *regs)
-{
-	/* call cpu specific function from $(CPU)/interrupts.c */
-	timer_interrupt_cpu(regs);
-
-	timestamp++;
-
-	/* Restore Decrementer Count */
-	set_dec(decrementer_count);
-
-#if defined(CONFIG_WATCHDOG) || defined (CONFIG_HW_WATCHDOG)
-	if ((timestamp % (CFG_WATCHDOG_FREQ)) == 0)
-		WATCHDOG_RESET();
-#endif /* CONFIG_WATCHDOG || CONFIG_HW_WATCHDOG */
-
-#ifdef CONFIG_STATUS_LED
-	status_led_tick(timestamp);
-#endif /* CONFIG_STATUS_LED */
-
-#ifdef CONFIG_SHOW_ACTIVITY
-	board_show_activity(timestamp);
-#endif /* CONFIG_SHOW_ACTIVITY */
-
-}
-
-void reset_timer(void)
-{
-	timestamp = 0;
-}
-
-ulong get_timer(ulong base)
-{
-	return timestamp - base;
-}
-
-void set_timer(ulong t)
-{
-	timestamp = t;
-}
-
 /*
  * Install and free a interrupt handler. Not implemented yet.
  */
-
 void irq_install_handler(int vec, interrupt_handler_t *handler, void *arg)
 {
 }
@@ -218,8 +103,6 @@ void irq_free_handler(int vec)
  */
 int do_irqinfo(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 {
-	printf("\nInterrupt-unsupported:\n");
-
 	return 0;
 }
 
diff --git a/cpu/mpc86xx/mp.c b/cpu/mpc86xx/mp.c
new file mode 100644
index 000000000..5014401dd
--- /dev/null
+++ b/cpu/mpc86xx/mp.c
@@ -0,0 +1,68 @@
+#include <common.h>
+#include <asm/processor.h>
+#include <asm/mmu.h>
+#include <ioports.h>
+#include <lmb.h>
+#include <asm/io.h>
+#include "mp.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#if (CONFIG_NUM_CPUS > 1)
+void cpu_mp_lmb_reserve(struct lmb *lmb)
+{
+	u32 bootpg;
+
+	/* if we have 4G or more of memory, put the boot page at 4Gb-1M */
+	if ((u64)gd->ram_size > 0xfffff000)
+		bootpg = 0xfff00000;
+	else
+		bootpg = gd->ram_size - (1024 * 1024);
+
+	/* tell u-boot we stole a page */
+	lmb_reserve(lmb, bootpg, 4096);
+}
+
+/*
+ * Copy the code for other cpus to execute into an
+ * aligned location accessible via BPTR
+ */
+void setup_mp(void)
+{
+	extern ulong __secondary_start_page;
+	ulong fixup = (ulong)&__secondary_start_page;
+	u32 bootpg;
+	u32 bootpg_va;
+
+	/*
+	 * If we have 4G or more of memory, put the boot page at 4Gb-1M.
+	 * Otherwise, put it at the very end of RAM.
+	 */
+	if (gd->ram_size > 0xfffff000)
+		bootpg = 0xfff00000;
+	else
+		bootpg = gd->ram_size - (1024 * 1024);
+
+	if (bootpg >= CONFIG_SYS_MAX_DDR_BAT_SIZE) {
+		/* We're not covered by the DDR mapping, set up BAT  */
+		write_bat(DBAT7, CONFIG_SYS_SCRATCH_VA | BATU_BL_128K |
+			  BATU_VS | BATU_VP,
+			  bootpg | BATL_PP_RW | BATL_MEMCOHERENCE);
+		bootpg_va = CONFIG_SYS_SCRATCH_VA;
+	} else {
+		bootpg_va = bootpg;
+	}
+
+	memcpy((void *)bootpg_va, (void *)fixup, 4096);
+	flush_cache(bootpg_va, 4096);
+
+	/* remove the temporary BAT mapping */
+	if (bootpg >= CONFIG_SYS_MAX_DDR_BAT_SIZE)
+		write_bat(DBAT7, 0, 0);
+
+	/* If the physical location of bootpg is not at fff00000, set BPTR */
+	if (bootpg != 0xfff00000)
+		out_be32((uint *)(CONFIG_SYS_CCSRBAR + 0x20), 0x80000000 |
+			 (bootpg >> 12));
+}
+#endif
diff --git a/cpu/mpc86xx/mp.h b/cpu/mpc86xx/mp.h
new file mode 100644
index 000000000..886e0c839
--- /dev/null
+++ b/cpu/mpc86xx/mp.h
@@ -0,0 +1,7 @@
+#ifndef __MPC86XX_MP_H_
+#define __MPC86XX_MP_H_
+
+void setup_mp(void);
+void cpu_mp_lmb_reserve(struct lmb *lmb);
+
+#endif
diff --git a/cpu/mpc86xx/release.S b/cpu/mpc86xx/release.S
new file mode 100644
index 000000000..95efbb4f8
--- /dev/null
+++ b/cpu/mpc86xx/release.S
@@ -0,0 +1,169 @@
+/*
+ * Copyright 2004, 2007, 2008 Freescale Semiconductor.
+ * Srikanth Srinivasan <srikanth.srinivaan@freescale.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#include <config.h>
+#include <mpc86xx.h>
+#include <version.h>
+
+#include <ppc_asm.tmpl>
+#include <ppc_defs.h>
+
+#include <asm/cache.h>
+#include <asm/mmu.h>
+
+/* If this is a multi-cpu system then we need to handle the
+ * 2nd cpu.  The assumption is that the 2nd cpu is being
+ * held in boot holdoff mode until the 1st cpu unlocks it
+ * from Linux.	We'll do some basic cpu init and then pass
+ * it to the Linux Reset Vector.
+ * Sri:	 Much of this initialization is not required. Linux
+ * rewrites the bats, and the sprs and also enables the L1 cache.
+ *
+ * Core 0 must copy this to a 1M aligned region and set BPTR
+ * to point to it.
+ */
+#if (CONFIG_NUM_CPUS > 1)
+	.align 12
+.globl __secondary_start_page
+__secondary_start_page:
+	.space 0x100	/* space over to reset vector loc */
+	mfspr	r0, MSSCR0
+	andi.	r0, r0, 0x0020
+	rlwinm	r0,r0,27,31,31
+	mtspr	PIR, r0
+
+	/* Invalidate BATs */
+	li	r0, 0
+	mtspr	IBAT0U, r0
+	mtspr	IBAT1U, r0
+	mtspr	IBAT2U, r0
+	mtspr	IBAT3U, r0
+	mtspr	IBAT4U, r0
+	mtspr	IBAT5U, r0
+	mtspr	IBAT6U, r0
+	mtspr	IBAT7U, r0
+	isync
+	mtspr	DBAT0U, r0
+	mtspr	DBAT1U, r0
+	mtspr	DBAT2U, r0
+	mtspr	DBAT3U, r0
+	mtspr	DBAT4U, r0
+	mtspr	DBAT5U, r0
+	mtspr	DBAT6U, r0
+	mtspr	DBAT7U, r0
+	isync
+	sync
+
+	/* enable extended addressing */
+	mfspr	r0, HID0
+	lis	r0, (HID0_HIGH_BAT_EN | HID0_XBSEN | HID0_XAEN)@h
+	ori	r0, r0, (HID0_HIGH_BAT_EN | HID0_XBSEN | HID0_XAEN)@l
+	mtspr	HID0, r0
+	sync
+	isync
+
+#ifdef CONFIG_SYS_L2
+	/* init the L2 cache */
+	addis	r3, r0, L2_INIT@h
+	ori	r3, r3, L2_INIT@l
+	sync
+	mtspr	l2cr, r3
+#ifdef CONFIG_ALTIVEC
+	dssall
+#endif
+	/* invalidate the L2 cache */
+	mfspr	r3, l2cr
+	rlwinm.	r3, r3, 0, 0, 0
+	beq	1f
+
+	mfspr	r3, l2cr
+	rlwinm	r3, r3, 0, 1, 31
+
+#ifdef	CONFIG_ALTIVEC
+	dssall
+#endif
+	sync
+	mtspr	l2cr, r3
+	sync
+1:	mfspr	r3, l2cr
+	oris	r3, r3, L2CR_L2I@h
+	mtspr	l2cr, r3
+
+invl2:
+	mfspr	r3, l2cr
+	andis.	r3, r3, L2CR_L2I@h
+	bne	invl2
+	sync
+#endif
+
+	/* enable and invalidate the data cache */
+	mfspr	r3, HID0
+	li	r5, HID0_DCFI|HID0_DLOCK
+	andc	r3, r3, r5
+	mtspr	HID0, r3		/* no invalidate, unlock */
+	ori	r3, r3, HID0_DCE
+	ori	r5, r3, HID0_DCFI
+	mtspr	HID0, r5		/* enable + invalidate */
+	mtspr	HID0, r3		/* enable */
+	sync
+#ifdef CONFIG_SYS_L2
+	sync
+	lis	r3, L2_ENABLE@h
+	ori	r3, r3, L2_ENABLE@l
+	mtspr	l2cr, r3
+	isync
+	sync
+#endif
+
+	/* enable and invalidate the instruction cache*/
+	mfspr	r3, HID0
+	li	r5, HID0_ICFI|HID0_ILOCK
+	andc	r3, r3, r5
+	ori	r3, r3, HID0_ICE
+	ori	r5, r3, HID0_ICFI
+	mtspr	HID0, r5
+	mtspr	HID0, r3
+	isync
+	sync
+
+	/* TBEN in HID0 */
+	mfspr	r4, HID0
+	oris	r4, r4, 0x0400
+	mtspr	HID0, r4
+	sync
+	isync
+
+	/* MCP|SYNCBE|ABE in HID1 */
+	mfspr	r4, HID1
+	oris	r4, r4, 0x8000
+	ori	r4, r4, 0x0C00
+	mtspr	HID1, r4
+	sync
+	isync
+
+	lis	r3, CONFIG_LINUX_RESET_VEC@h
+	ori	r3, r3, CONFIG_LINUX_RESET_VEC@l
+	mtlr	r3
+	blr
+
+	/* Never Returns, Running in Linux Now */
+#endif
diff --git a/cpu/mpc86xx/speed.c b/cpu/mpc86xx/speed.c
index da5b58b73..415ac9db8 100644
--- a/cpu/mpc86xx/speed.c
+++ b/cpu/mpc86xx/speed.c
@@ -36,7 +36,7 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 
 void get_sys_info(sys_info_t *sysInfo)
 {
-	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
 	volatile ccsr_gur_t *gur = &immap->im_gur;
 	uint plat_ratio, e600_ratio;
 
diff --git a/cpu/mpc86xx/start.S b/cpu/mpc86xx/start.S
index 03f212844..63cc8dbcd 100644
--- a/cpu/mpc86xx/start.S
+++ b/cpu/mpc86xx/start.S
@@ -32,6 +32,7 @@
  */
 #include <config.h>
 #include <mpc86xx.h>
+#include <timestamp.h>
 #include <version.h>
 
 #include <ppc_asm.tmpl>
@@ -76,7 +77,7 @@
 	.globl	version_string
 version_string:
 	.ascii	U_BOOT_VERSION
-	.ascii	" (", __DATE__, " - ", __TIME__, ")"
+	.ascii	" (", U_BOOT_DATE, " - ", U_BOOT_TIME, ")"
 	.ascii	CONFIG_IDENT_STRING, "\0"
 
 	. = EXC_OFF_SYS_RESET
@@ -179,22 +180,12 @@ _end_of_vectors:
 
 boot_cold:
 boot_warm:
-
-	/* if this is a multi-core system we need to check which cpu
-	 * this is, if it is not cpu 0 send the cpu to the linux reset
-	 * vector */
-#if (CONFIG_NUM_CPUS > 1)
-	mfspr	r0, MSSCR0
-	andi.	r0, r0, 0x0020
-	rlwinm	r0,r0,27,31,31
-	mtspr	PIR, r0
-	beq	1f
-
-	bl	secondary_cpu_setup
-#endif
-
+	/*
+	 * NOTE: Only Cpu 0 will ever come here.  Other cores go to an
+	 * address specified by the BPTR
+	 */
 1:
-#ifdef CFG_RAMBOOT
+#ifdef CONFIG_SYS_RAMBOOT
 	/* disable everything */
 	li	r0, 0
 	mtspr	HID0, r0
@@ -202,10 +193,14 @@ boot_warm:
 	mtmsr	0
 #endif
 
+	/* Invalidate BATs */
 	bl	invalidate_bats
 	sync
+	/* Invalidate all of TLB before MMU turn on */
+	bl      clear_tlbs
+	sync
 
-#ifdef CFG_L2
+#ifdef CONFIG_SYS_L2
 	/* init the L2 cache */
 	lis	r3, L2_INIT@h
 	ori	r3, r3, L2_INIT@l
@@ -218,8 +213,8 @@ boot_warm:
 	/*
 	 * Calculate absolute address in FLASH and jump there
 	 *------------------------------------------------------*/
-	lis	r3, CFG_MONITOR_BASE@h
-	ori	r3, r3, CFG_MONITOR_BASE@l
+	lis	r3, CONFIG_SYS_MONITOR_BASE_EARLY@h
+	ori	r3, r3, CONFIG_SYS_MONITOR_BASE_EARLY@l
 	addi	r3, r3, in_flash - _start + EXC_OFF_SYS_RESET
 	mtlr	r3
 	blr
@@ -245,9 +240,15 @@ in_flash:
 	 */
 
 	/* enable address translation */
-	bl	enable_addr_trans
-	sync
+	mfmsr	r5
+	ori	r5, r5, (MSR_IR | MSR_DR)
+	lis	r3,addr_trans_enabled@h
+	ori	r3, r3, addr_trans_enabled@l
+	mtspr	SPRN_SRR0,r3
+	mtspr	SPRN_SRR1,r5
+	rfi
 
+addr_trans_enabled:
 	/* enable and invalidate the data cache */
 /*	bl	l1dcache_enable */
 	bl	dcache_enable
@@ -257,15 +258,19 @@ in_flash:
 	bl	icache_enable
 #endif
 
-#ifdef CFG_INIT_RAM_LOCK
+#ifdef CONFIG_SYS_INIT_RAM_LOCK
 	bl	lock_ram_in_cache
 	sync
 #endif
 
+#if (CONFIG_SYS_CCSRBAR_DEFAULT != CONFIG_SYS_CCSRBAR)
+	bl      setup_ccsrbar
+#endif
+
 	/* set up the stack pointer in our newly created
 	 * cache-ram (r1) */
-	lis	r1, (CFG_INIT_RAM_ADDR + CFG_GBL_DATA_OFFSET)@h
-	ori	r1, r1, (CFG_INIT_RAM_ADDR + CFG_GBL_DATA_OFFSET)@l
+	lis	r1, (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET)@h
+	ori	r1, r1, (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET)@l
 
 	li	r0, 0		/* Make room for stack frame header and */
 	stwu	r0, -4(r1)	/* clear final stack frame so that	*/
@@ -273,16 +278,6 @@ in_flash:
 
 	GET_GOT			/* initialize GOT access	*/
 
-	/* setup the rest of the bats */
-	bl      setup_bats
-	bl      clear_tlbs
-	sync
-
-#if (CFG_CCSRBAR_DEFAULT != CFG_CCSRBAR)
-	/* setup ccsrbar */
-	bl      setup_ccsrbar
-#endif
-
 	/* run low-level CPU init code	   (from Flash) */
 	bl	cpu_init_f
 	sync
@@ -290,7 +285,7 @@ in_flash:
 #ifdef	RUN_DIAG
 
 	/* Load PX_AUX register address in r4 */
-	lis	r4, 0xf810
+	lis	r4, PIXIS_BASE@h
 	ori	r4, r4, 0x6
 	/* Load contents of PX_AUX in r3 bits 24 to 31*/
 	lbz	r3, 0(r4)
@@ -308,8 +303,8 @@ in_flash:
 	stb	r3, 0(r4)
 
 	/* Get the address to jump to in r3*/
-	lis	r3, CFG_DIAG_ADDR@h
-	ori	r3, r3, CFG_DIAG_ADDR@l
+	lis	r3, CONFIG_SYS_DIAG_ADDR@h
+	ori	r3, r3, CONFIG_SYS_DIAG_ADDR@l
 
 	/* Load the LR with the branch address */
 	mtlr	r3
@@ -362,45 +357,83 @@ invalidate_bats:
  * early_bats:
  *
  * Set up bats needed early on - this is usually the BAT for the
- * stack-in-cache and the Flash
+ * stack-in-cache, the Flash, and CCSR space
  */
 	.globl  early_bats
 early_bats:
+	/* IBAT 3 */
+	lis	r4, CONFIG_SYS_IBAT3L@h
+	ori     r4, r4, CONFIG_SYS_IBAT3L@l
+	lis	r3, CONFIG_SYS_IBAT3U@h
+	ori     r3, r3, CONFIG_SYS_IBAT3U@l
+	mtspr   IBAT3L, r4
+	mtspr   IBAT3U, r3
+	isync
+
+	/* DBAT 3 */
+	lis	r4, CONFIG_SYS_DBAT3L@h
+	ori     r4, r4, CONFIG_SYS_DBAT3L@l
+	lis	r3, CONFIG_SYS_DBAT3U@h
+	ori     r3, r3, CONFIG_SYS_DBAT3U@l
+	mtspr   DBAT3L, r4
+	mtspr   DBAT3U, r3
+	isync
+
 	/* IBAT 5 */
-	lis	r4, CFG_IBAT5L@h
-	ori     r4, r4, CFG_IBAT5L@l
-	lis	r3, CFG_IBAT5U@h
-	ori     r3, r3, CFG_IBAT5U@l
+	lis	r4, CONFIG_SYS_IBAT5L@h
+	ori     r4, r4, CONFIG_SYS_IBAT5L@l
+	lis	r3, CONFIG_SYS_IBAT5U@h
+	ori     r3, r3, CONFIG_SYS_IBAT5U@l
 	mtspr   IBAT5L, r4
 	mtspr   IBAT5U, r3
 	isync
 
 	/* DBAT 5 */
-	lis	r4, CFG_DBAT5L@h
-	ori     r4, r4, CFG_DBAT5L@l
-	lis	r3, CFG_DBAT5U@h
-	ori     r3, r3, CFG_DBAT5U@l
+	lis	r4, CONFIG_SYS_DBAT5L@h
+	ori     r4, r4, CONFIG_SYS_DBAT5L@l
+	lis	r3, CONFIG_SYS_DBAT5U@h
+	ori     r3, r3, CONFIG_SYS_DBAT5U@l
 	mtspr   DBAT5L, r4
 	mtspr   DBAT5U, r3
 	isync
 
 	/* IBAT 6 */
-	lis	r4, CFG_IBAT6L@h
-	ori     r4, r4, CFG_IBAT6L@l
-	lis	r3, CFG_IBAT6U@h
-	ori     r3, r3, CFG_IBAT6U@l
+	lis	r4, CONFIG_SYS_IBAT6L_EARLY@h
+	ori     r4, r4, CONFIG_SYS_IBAT6L_EARLY@l
+	lis	r3, CONFIG_SYS_IBAT6U_EARLY@h
+	ori     r3, r3, CONFIG_SYS_IBAT6U_EARLY@l
 	mtspr   IBAT6L, r4
 	mtspr   IBAT6U, r3
 	isync
 
 	/* DBAT 6 */
-	lis	r4, CFG_DBAT6L@h
-	ori     r4, r4, CFG_DBAT6L@l
-	lis	r3, CFG_DBAT6U@h
-	ori     r3, r3, CFG_DBAT6U@l
+	lis	r4, CONFIG_SYS_DBAT6L_EARLY@h
+	ori     r4, r4, CONFIG_SYS_DBAT6L_EARLY@l
+	lis	r3, CONFIG_SYS_DBAT6U_EARLY@h
+	ori     r3, r3, CONFIG_SYS_DBAT6U_EARLY@l
 	mtspr   DBAT6L, r4
 	mtspr   DBAT6U, r3
 	isync
+
+#if(CONFIG_SYS_CCSRBAR_DEFAULT != CONFIG_SYS_CCSRBAR)
+	/* IBAT 7 */
+	lis	r4, CONFIG_SYS_CCSR_DEFAULT_IBATL@h
+	ori     r4, r4, CONFIG_SYS_CCSR_DEFAULT_IBATL@l
+	lis	r3, CONFIG_SYS_CCSR_DEFAULT_IBATU@h
+	ori     r3, r3, CONFIG_SYS_CCSR_DEFAULT_IBATU@l
+	mtspr   IBAT7L, r4
+	mtspr   IBAT7U, r3
+	isync
+
+	/* DBAT 7 */
+	lis	r4, CONFIG_SYS_CCSR_DEFAULT_DBATL@h
+	ori     r4, r4, CONFIG_SYS_CCSR_DEFAULT_DBATL@l
+	lis	r3, CONFIG_SYS_CCSR_DEFAULT_DBATU@h
+	ori     r3, r3, CONFIG_SYS_CCSR_DEFAULT_DBATU@l
+	mtspr   DBAT7L, r4
+	mtspr   DBAT7U, r3
+	isync
+#endif
 	blr
 
 	.globl clear_tlbs
@@ -416,15 +449,6 @@ tlblp:
 	blt tlblp
 	blr
 
-	.globl enable_addr_trans
-enable_addr_trans:
-	/* enable address translation */
-	mfmsr	r5
-	ori	r5, r5, (MSR_IR | MSR_DR)
-	mtmsr	r5
-	isync
-	blr
-
 	.globl disable_addr_trans
 disable_addr_trans:
 	/* disable address translation */
@@ -617,20 +641,19 @@ relocate_code:
 
 	mr	r1,  r3		/* Set new stack pointer		*/
 	mr	r9,  r4		/* Save copy of Global Data pointer	*/
-	mr	r2,  r9		/* Save for DECLARE_GLOBAL_DATA_PTR	*/
 	mr	r10, r5		/* Save copy of Destination Address	*/
 
 	mr	r3,  r5				/* Destination Address	*/
-	lis	r4, CFG_MONITOR_BASE@h		/* Source      Address	*/
-	ori	r4, r4, CFG_MONITOR_BASE@l
+	lis	r4, CONFIG_SYS_MONITOR_BASE@h		/* Source      Address	*/
+	ori	r4, r4, CONFIG_SYS_MONITOR_BASE@l
 	lwz	r5, GOT(__init_end)
 	sub	r5, r5, r4
-	li	r6, CFG_CACHELINE_SIZE		/* Cache Line Size	*/
+	li	r6, CONFIG_SYS_CACHELINE_SIZE		/* Cache Line Size	*/
 
 	/*
 	 * Fix GOT pointer:
 	 *
-	 * New GOT-PTR = (old GOT-PTR - CFG_MONITOR_BASE) + Destination Address
+	 * New GOT-PTR = (old GOT-PTR - CONFIG_SYS_MONITOR_BASE) + Destination Address
 	 *
 	 * Offset:
 	 */
@@ -644,16 +667,6 @@ relocate_code:
 	/*
 	 * Now relocate code
 	 */
-#ifdef CONFIG_ECC
-	bl	board_relocate_rom
-	sync
-	mr	r3, r10				/* Destination Address	*/
-	lis	r4, CFG_MONITOR_BASE@h		/* Source      Address	*/
-	ori	r4, r4, CFG_MONITOR_BASE@l
-	lwz	r5, GOT(__init_end)
-	sub	r5, r5, r4
-	li	r6, CFG_CACHELINE_SIZE		/* Cache Line Size	*/
-#else
 	cmplw	cr1,r3,r4
 	addi	r0,r5,3
 	srwi.	r0,r0,2
@@ -675,7 +688,6 @@ relocate_code:
 3:	lwzu	r0,-4(r8)
 	stwu	r0,-4(r7)
 	bdnz	3b
-#endif
 /*
  * Now flush the cache: note that we must start from a cache aligned
  * address. Otherwise we might miss one cache line.
@@ -708,9 +720,6 @@ relocate_code:
 	blr
 
 in_ram:
-#ifdef CONFIG_ECC
-	bl	board_init_ecc
-#endif
 	/*
 	 * Relocation Function, r14 point to got2+0x8000
 	 *
@@ -864,40 +873,43 @@ enable_ext_addr:
 	isync
 	blr
 
-#if (CFG_CCSRBAR_DEFAULT != CFG_CCSRBAR)
+#if (CONFIG_SYS_CCSRBAR_DEFAULT != CONFIG_SYS_CCSRBAR)
 .globl setup_ccsrbar
 setup_ccsrbar:
 	/* Special sequence needed to update CCSRBAR itself */
-	lis	r4, CFG_CCSRBAR_DEFAULT@h
-	ori	r4, r4, CFG_CCSRBAR_DEFAULT@l
-
-	lis	r5, CFG_CCSRBAR@h
-	ori	r5, r5, CFG_CCSRBAR@l
-	srwi	r6,r5,12
-	stw	r6, 0(r4)
+	lis	r4, CONFIG_SYS_CCSRBAR_DEFAULT@h
+	ori	r4, r4, CONFIG_SYS_CCSRBAR_DEFAULT@l
+
+	lis	r5, CONFIG_SYS_CCSRBAR_PHYS_LOW@h
+	ori	r5, r5, CONFIG_SYS_CCSRBAR_PHYS_LOW@l
+	srwi	r5,r5,12
+	li	r6, CONFIG_SYS_CCSRBAR_PHYS_HIGH@l
+	rlwimi	r5,r6,20,8,11
+	stw	r5, 0(r4) /* Store physical value of CCSR */
 	isync
 
-	lis	r5, 0xffff
-	ori	r5,r5,0xf000
+	lis	r5, TEXT_BASE@h
+	ori	r5,r5,TEXT_BASE@l
 	lwz	r5, 0(r5)
 	isync
 
-	lis	r3, CFG_CCSRBAR@h
-	lwz	r5, CFG_CCSRBAR@l(r3)
+	/* Use VA of CCSR to do read */
+	lis	r3, CONFIG_SYS_CCSRBAR@h
+	lwz	r5, CONFIG_SYS_CCSRBAR@l(r3)
 	isync
 
 	blr
 #endif
 
-#ifdef CFG_INIT_RAM_LOCK
+#ifdef CONFIG_SYS_INIT_RAM_LOCK
 lock_ram_in_cache:
 	/* Allocate Initial RAM in data cache.
 	 */
-	lis	r3, (CFG_INIT_RAM_ADDR & ~31)@h
-	ori	r3, r3, (CFG_INIT_RAM_ADDR & ~31)@l
-	li	r2, ((CFG_INIT_RAM_END & ~31) + \
-		     (CFG_INIT_RAM_ADDR & 31) + 31) / 32
-	mtctr	r2
+	lis	r3, (CONFIG_SYS_INIT_RAM_ADDR & ~31)@h
+	ori	r3, r3, (CONFIG_SYS_INIT_RAM_ADDR & ~31)@l
+	li	r4, ((CONFIG_SYS_INIT_RAM_END & ~31) + \
+		     (CONFIG_SYS_INIT_RAM_ADDR & 31) + 31) / 32
+	mtctr	r4
 1:
 	dcbz	r0, r3
 	addi	r3, r3, 32
@@ -928,11 +940,11 @@ lock_ram_in_cache:
 .globl unlock_ram_in_cache
 unlock_ram_in_cache:
 	/* invalidate the INIT_RAM section */
-	lis	r3, (CFG_INIT_RAM_ADDR & ~31)@h
-	ori	r3, r3, (CFG_INIT_RAM_ADDR & ~31)@l
-	li	r2, ((CFG_INIT_RAM_END & ~31) + \
-		     (CFG_INIT_RAM_ADDR & 31) + 31) / 32
-	mtctr	r2
+	lis	r3, (CONFIG_SYS_INIT_RAM_ADDR & ~31)@h
+	ori	r3, r3, (CONFIG_SYS_INIT_RAM_ADDR & ~31)@l
+	li	r4, ((CONFIG_SYS_INIT_RAM_END & ~31) + \
+		     (CONFIG_SYS_INIT_RAM_ADDR & 31) + 31) / 32
+	mtctr	r4
 1:	icbi	r0, r3
 	addi	r3, r3, 32
 	bdnz	1b
@@ -970,64 +982,3 @@ unlock_ram_in_cache:
 	blr
 #endif
 #endif
-
-/* If this is a multi-cpu system then we need to handle the
- * 2nd cpu.  The assumption is that the 2nd cpu is being
- * held in boot holdoff mode until the 1st cpu unlocks it
- * from Linux.	We'll do some basic cpu init and then pass
- * it to the Linux Reset Vector.
- * Sri:	 Much of this initialization is not required. Linux
- * rewrites the bats, and the sprs and also enables the L1 cache.
- */
-#if (CONFIG_NUM_CPUS > 1)
-.globl secondary_cpu_setup
-secondary_cpu_setup:
-	/* Do only core setup on all cores except cpu0 */
-	bl	invalidate_bats
-	sync
-	bl	enable_ext_addr
-
-#ifdef CFG_L2
-	/* init the L2 cache */
-	addis	r3, r0, L2_INIT@h
-	ori	r3, r3, L2_INIT@l
-	sync
-	mtspr	l2cr, r3
-#ifdef CONFIG_ALTIVEC
-	dssall
-#endif
-	/* invalidate the L2 cache */
-	bl	l2cache_invalidate
-	sync
-#endif
-
-	/* enable and invalidate the data cache */
-	bl	dcache_enable
-	sync
-
-	/* enable and invalidate the instruction cache*/
-	bl	icache_enable
-	sync
-
-	/* TBEN in HID0 */
-	mfspr	r4, HID0
-	oris	r4, r4, 0x0400
-	mtspr	HID0, r4
-	sync
-	isync
-
-	/* MCP|SYNCBE|ABE in HID1 */
-	mfspr	r4, HID1
-	oris	r4, r4, 0x8000
-	ori	r4, r4, 0x0C00
-	mtspr	HID1, r4
-	sync
-	isync
-
-	lis	r3, CONFIG_LINUX_RESET_VEC@h
-	ori	r3, r3, CONFIG_LINUX_RESET_VEC@l
-	mtlr	r3
-	blr
-
-	/* Never Returns, Running in Linux Now */
-#endif
diff --git a/cpu/mpc8xx/commproc.c b/cpu/mpc8xx/commproc.c
index 07c763cfd..a87a0dce8 100644
--- a/cpu/mpc8xx/commproc.c
+++ b/cpu/mpc8xx/commproc.c
@@ -26,7 +26,7 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
-#ifdef CFG_ALLOC_DPRAM
+#ifdef CONFIG_SYS_ALLOC_DPRAM
 
 int dpram_init (void)
 {
@@ -82,14 +82,14 @@ uint dpram_base_align (uint align)
 
 	return (gd->dp_alloc_base + mask) & ~mask;
 }
-#endif	/* CFG_ALLOC_DPRAM */
+#endif	/* CONFIG_SYS_ALLOC_DPRAM */
 
 #if defined(CONFIG_POST) || defined(CONFIG_LOGBUFFER)
 
 void post_word_store (ulong a)
 {
 	volatile void *save_addr =
-		((immap_t *) CFG_IMMR)->im_cpm.cp_dpmem + CPM_POST_WORD_ADDR;
+		((immap_t *) CONFIG_SYS_IMMR)->im_cpm.cp_dpmem + CPM_POST_WORD_ADDR;
 
 	*(volatile ulong *) save_addr = a;
 }
@@ -97,7 +97,7 @@ void post_word_store (ulong a)
 ulong post_word_load (void)
 {
 	volatile void *save_addr =
-		((immap_t *) CFG_IMMR)->im_cpm.cp_dpmem + CPM_POST_WORD_ADDR;
+		((immap_t *) CONFIG_SYS_IMMR)->im_cpm.cp_dpmem + CPM_POST_WORD_ADDR;
 
 	return *(volatile ulong *) save_addr;
 }
@@ -109,7 +109,7 @@ ulong post_word_load (void)
 void bootcount_store (ulong a)
 {
 	volatile ulong *save_addr =
-		(volatile ulong *)( ((immap_t *) CFG_IMMR)->im_cpm.cp_dpmem +
+		(volatile ulong *)( ((immap_t *) CONFIG_SYS_IMMR)->im_cpm.cp_dpmem +
 		                    CPM_BOOTCOUNT_ADDR );
 
 	save_addr[0] = a;
@@ -119,7 +119,7 @@ void bootcount_store (ulong a)
 ulong bootcount_load (void)
 {
 	volatile ulong *save_addr =
-		(volatile ulong *)( ((immap_t *) CFG_IMMR)->im_cpm.cp_dpmem +
+		(volatile ulong *)( ((immap_t *) CONFIG_SYS_IMMR)->im_cpm.cp_dpmem +
 		                    CPM_BOOTCOUNT_ADDR );
 
 	if (save_addr[1] != BOOTCOUNT_MAGIC)
diff --git a/cpu/mpc8xx/cpu.c b/cpu/mpc8xx/cpu.c
index ec6a3fd5d..2eb848bd0 100644
--- a/cpu/mpc8xx/cpu.c
+++ b/cpu/mpc8xx/cpu.c
@@ -37,6 +37,8 @@
 #include <watchdog.h>
 #include <command.h>
 #include <mpc8xx.h>
+#include <commproc.h>
+#include <netdev.h>
 #include <asm/cache.h>
 
 #if defined(CONFIG_OF_LIBFDT)
@@ -137,13 +139,13 @@ static int check_CPU (long clock, uint pvr, uint immr)
 		printf ("unknown M%s (0x%08x)", id_str, k);
 
 
-#if defined(CFG_8xx_CPUCLK_MIN) && defined(CFG_8xx_CPUCLK_MAX)
+#if defined(CONFIG_SYS_8xx_CPUCLK_MIN) && defined(CONFIG_SYS_8xx_CPUCLK_MAX)
 	printf (" at %s MHz [%d.%d...%d.%d MHz]\n       ",
 		strmhz (buf, clock),
-		CFG_8xx_CPUCLK_MIN / 1000000,
-		((CFG_8xx_CPUCLK_MIN % 1000000) + 50000) / 100000,
-		CFG_8xx_CPUCLK_MAX / 1000000,
-		((CFG_8xx_CPUCLK_MAX % 1000000) + 50000) / 100000
+		CONFIG_SYS_8xx_CPUCLK_MIN / 1000000,
+		((CONFIG_SYS_8xx_CPUCLK_MIN % 1000000) + 50000) / 100000,
+		CONFIG_SYS_8xx_CPUCLK_MAX / 1000000,
+		((CONFIG_SYS_8xx_CPUCLK_MAX % 1000000) + 50000) / 100000
 	);
 #else
 	printf (" at %s MHz: ", strmhz (buf, clock));
@@ -375,7 +377,7 @@ int checkcpu (void)
 
 int checkicache (void)
 {
-	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
 	volatile memctl8xx_t *memctl = &immap->im_memctl;
 	u32 cacheon = rd_ic_cst () & IDC_ENABLED;
 
@@ -422,7 +424,7 @@ int checkicache (void)
 
 int checkdcache (void)
 {
-	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
 	volatile memctl8xx_t *memctl = &immap->im_memctl;
 	u32 cacheon = rd_dc_cst () & IDC_ENABLED;
 
@@ -462,7 +464,7 @@ void upmconfig (uint upm, uint * table, uint size)
 {
 	uint i;
 	uint addr = 0;
-	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
 	volatile memctl8xx_t *memctl = &immap->im_memctl;
 
 	for (i = 0; i < size; i++) {
@@ -480,7 +482,7 @@ int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 {
 	ulong msr, addr;
 
-	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
 
 	immap->im_clkrst.car_plprcr |= PLPRCR_CSR;	/* Checkstop Reset enable */
 
@@ -495,16 +497,16 @@ int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 	 * Trying to execute the next instruction at a non-existing address
 	 * should cause a machine check, resulting in reset
 	 */
-#ifdef CFG_RESET_ADDRESS
-	addr = CFG_RESET_ADDRESS;
+#ifdef CONFIG_SYS_RESET_ADDRESS
+	addr = CONFIG_SYS_RESET_ADDRESS;
 #else
 	/*
-	 * note: when CFG_MONITOR_BASE points to a RAM address, CFG_MONITOR_BASE
+	 * note: when CONFIG_SYS_MONITOR_BASE points to a RAM address, CONFIG_SYS_MONITOR_BASE
 	 * - sizeof (ulong) is usually a valid address. Better pick an address
-	 * known to be invalid on your system and assign it to CFG_RESET_ADDRESS.
+	 * known to be invalid on your system and assign it to CONFIG_SYS_RESET_ADDRESS.
 	 * "(ulong)-1" used to be a good choice for many systems...
 	 */
-	addr = CFG_MONITOR_BASE - sizeof (ulong);
+	addr = CONFIG_SYS_MONITOR_BASE - sizeof (ulong);
 #endif
 	((void (*)(void)) addr) ();
 	return 1;
@@ -525,7 +527,7 @@ int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 	disable_interrupts ();
 
 	/* make sure the watchdog is running */
-	reset_8xx_watchdog ((immap_t *) CFG_IMMR);
+	reset_8xx_watchdog ((immap_t *) CONFIG_SYS_IMMR);
 
 	/* wait for watchdog reset */
 	while (1) {};
@@ -591,7 +593,7 @@ void watchdog_reset (void)
 {
 	int re_enable = disable_interrupts ();
 
-	reset_8xx_watchdog ((immap_t *) CFG_IMMR);
+	reset_8xx_watchdog ((immap_t *) CONFIG_SYS_IMMR);
 	if (re_enable)
 		enable_interrupts ();
 }
@@ -635,3 +637,18 @@ void reset_8xx_watchdog (volatile immap_t * immr)
 # endif /* CONFIG_LWMON */
 }
 #endif /* CONFIG_WATCHDOG */
+
+/*
+ * Initializes on-chip ethernet controllers.
+ * to override, implement board_eth_init()
+ */
+int cpu_eth_init(bd_t *bis)
+{
+#if defined(SCC_ENET) && defined(CONFIG_CMD_NET)
+	scc_initialize(bis);
+#endif
+#if defined(FEC_ENET)
+	fec_initialize(bis);
+#endif
+	return 0;
+}
diff --git a/cpu/mpc8xx/cpu_init.c b/cpu/mpc8xx/cpu_init.c
index fb3414aae..eb0091bdb 100644
--- a/cpu/mpc8xx/cpu_init.c
+++ b/cpu/mpc8xx/cpu_init.c
@@ -27,12 +27,12 @@
 #include <mpc8xx.h>
 #include <commproc.h>
 
-#if defined(CFG_RTCSC) || defined(CFG_RMDS)
+#if defined(CONFIG_SYS_RTCSC) || defined(CONFIG_SYS_RMDS)
 DECLARE_GLOBAL_DATA_PTR;
 #endif
 
-#if defined(CFG_I2C_UCODE_PATCH) || defined(CFG_SPI_UCODE_PATCH) || \
-    defined(CFG_SMC_UCODE_PATCH)
+#if defined(CONFIG_SYS_I2C_UCODE_PATCH) || defined(CONFIG_SYS_SPI_UCODE_PATCH) || \
+    defined(CONFIG_SYS_SMC_UCODE_PATCH)
 void cpm_load_patch (volatile immap_t * immr);
 #endif
 
@@ -47,7 +47,7 @@ void cpu_init_f (volatile immap_t * immr)
 {
 #ifndef CONFIG_MBX
 	volatile memctl8xx_t *memctl = &immr->im_memctl;
-# ifdef CFG_PLPRCR
+# ifdef CONFIG_SYS_PLPRCR
 	ulong mfmask;
 # endif
 #endif
@@ -55,7 +55,7 @@ void cpu_init_f (volatile immap_t * immr)
 
 	/* SYPCR - contains watchdog control (11-9) */
 
-	immr->im_siu_conf.sc_sypcr = CFG_SYPCR;
+	immr->im_siu_conf.sc_sypcr = CONFIG_SYS_SYPCR;
 
 #if defined(CONFIG_WATCHDOG)
 	reset_8xx_watchdog (immr);
@@ -63,27 +63,27 @@ void cpu_init_f (volatile immap_t * immr)
 
 	/* SIUMCR - contains debug pin configuration (11-6) */
 #ifndef CONFIG_SVM_SC8xx
-	immr->im_siu_conf.sc_siumcr |= CFG_SIUMCR;
+	immr->im_siu_conf.sc_siumcr |= CONFIG_SYS_SIUMCR;
 #else
-	immr->im_siu_conf.sc_siumcr = CFG_SIUMCR;
+	immr->im_siu_conf.sc_siumcr = CONFIG_SYS_SIUMCR;
 #endif
 	/* initialize timebase status and control register (11-26) */
 	/* unlock TBSCRK */
 
 	immr->im_sitk.sitk_tbscrk = KAPWR_KEY;
-	immr->im_sit.sit_tbscr = CFG_TBSCR;
+	immr->im_sit.sit_tbscr = CONFIG_SYS_TBSCR;
 
 	/* initialize the PIT (11-31) */
 
 	immr->im_sitk.sitk_piscrk = KAPWR_KEY;
-	immr->im_sit.sit_piscr = CFG_PISCR;
+	immr->im_sit.sit_piscr = CONFIG_SYS_PISCR;
 
 	/* System integration timers. Don't change EBDF! (15-27) */
 
 	immr->im_clkrstk.cark_sccrk = KAPWR_KEY;
 	reg = immr->im_clkrst.car_sccr;
 	reg &= SCCR_MASK;
-	reg |= CFG_SCCR;
+	reg |= CONFIG_SYS_SCCR;
 	immr->im_clkrst.car_sccr = reg;
 
 	/* PLL (CPU clock) settings (15-30) */
@@ -92,25 +92,25 @@ void cpu_init_f (volatile immap_t * immr)
 
 #ifndef CONFIG_MBX		/* MBX board does things different */
 
-	/* If CFG_PLPRCR (set in the various *_config.h files) tries to
-	 * set the MF field, then just copy CFG_PLPRCR over car_plprcr,
-	 * otherwise OR in CFG_PLPRCR so we do not change the current MF
+	/* If CONFIG_SYS_PLPRCR (set in the various *_config.h files) tries to
+	 * set the MF field, then just copy CONFIG_SYS_PLPRCR over car_plprcr,
+	 * otherwise OR in CONFIG_SYS_PLPRCR so we do not change the current MF
 	 * field value.
 	 *
 	 * For newer (starting MPC866) chips PLPRCR layout is different.
 	 */
-#ifdef CFG_PLPRCR
+#ifdef CONFIG_SYS_PLPRCR
 	if (get_immr(0xFFFF) >= MPC8xx_NEW_CLK)
 	   mfmask = PLPRCR_MFACT_MSK;
 	else
 	   mfmask = PLPRCR_MF_MSK;
 
-	if ((CFG_PLPRCR & mfmask) != 0)
-	   reg = CFG_PLPRCR;			/* reset control bits   */
+	if ((CONFIG_SYS_PLPRCR & mfmask) != 0)
+	   reg = CONFIG_SYS_PLPRCR;			/* reset control bits   */
 	else {
 	   reg = immr->im_clkrst.car_plprcr;
 	   reg &= mfmask;			/* isolate MF-related fields */
-	   reg |= CFG_PLPRCR;			/* reset control bits   */
+	   reg |= CONFIG_SYS_PLPRCR;			/* reset control bits   */
 	}
 	immr->im_clkrst.car_plprcr = reg;
 #endif
@@ -130,20 +130,20 @@ void cpu_init_f (volatile immap_t * immr)
 	 * when FLASH size has been determined
 	 *
 	 * Depending on the size of the memory region defined by
-	 * CFG_OR0_REMAP some boards (wide address mask) allow to map the
-	 * CFG_MONITOR_BASE, while others (narrower address mask) can't
-	 * map CFG_MONITOR_BASE.
+	 * CONFIG_SYS_OR0_REMAP some boards (wide address mask) allow to map the
+	 * CONFIG_SYS_MONITOR_BASE, while others (narrower address mask) can't
+	 * map CONFIG_SYS_MONITOR_BASE.
 	 *
-	 * For example, for CONFIG_IVMS8, the CFG_MONITOR_BASE is
-	 * 0xff000000, but CFG_OR0_REMAP's address mask is 0xfff80000.
+	 * For example, for CONFIG_IVMS8, the CONFIG_SYS_MONITOR_BASE is
+	 * 0xff000000, but CONFIG_SYS_OR0_REMAP's address mask is 0xfff80000.
 	 *
 	 * If BR0 wasn't loaded with address base 0xff000000, then BR0's
 	 * base address remains as 0x00000000. However, the address mask
-	 * have been narrowed to 512Kb, so CFG_MONITOR_BASE wasn't mapped
+	 * have been narrowed to 512Kb, so CONFIG_SYS_MONITOR_BASE wasn't mapped
 	 * into the Bank0.
 	 *
 	 * This is why CONFIG_IVMS8 and similar boards must load BR0 with
-	 * CFG_BR0_PRELIM in advance.
+	 * CONFIG_SYS_BR0_PRELIM in advance.
 	 *
 	 * [Thanks to Michael Liao for this explanation.
 	 *  I owe him a free beer. - wd]
@@ -165,60 +165,60 @@ void cpu_init_f (volatile immap_t * immr)
     defined(CONFIG_SPC1920)	|| \
     defined(CONFIG_SPD823TS)
 
-	memctl->memc_br0 = CFG_BR0_PRELIM;
+	memctl->memc_br0 = CONFIG_SYS_BR0_PRELIM;
 #endif
 
-#if defined(CFG_OR0_REMAP)
-	memctl->memc_or0 = CFG_OR0_REMAP;
+#if defined(CONFIG_SYS_OR0_REMAP)
+	memctl->memc_or0 = CONFIG_SYS_OR0_REMAP;
 #endif
-#if defined(CFG_OR1_REMAP)
-	memctl->memc_or1 = CFG_OR1_REMAP;
+#if defined(CONFIG_SYS_OR1_REMAP)
+	memctl->memc_or1 = CONFIG_SYS_OR1_REMAP;
 #endif
-#if defined(CFG_OR5_REMAP)
-	memctl->memc_or5 = CFG_OR5_REMAP;
+#if defined(CONFIG_SYS_OR5_REMAP)
+	memctl->memc_or5 = CONFIG_SYS_OR5_REMAP;
 #endif
 
 	/* now restrict to preliminary range */
-	memctl->memc_br0 = CFG_BR0_PRELIM;
-	memctl->memc_or0 = CFG_OR0_PRELIM;
+	memctl->memc_br0 = CONFIG_SYS_BR0_PRELIM;
+	memctl->memc_or0 = CONFIG_SYS_OR0_PRELIM;
 
-#if (defined(CFG_OR1_PRELIM) && defined(CFG_BR1_PRELIM))
-	memctl->memc_or1 = CFG_OR1_PRELIM;
-	memctl->memc_br1 = CFG_BR1_PRELIM;
+#if (defined(CONFIG_SYS_OR1_PRELIM) && defined(CONFIG_SYS_BR1_PRELIM))
+	memctl->memc_or1 = CONFIG_SYS_OR1_PRELIM;
+	memctl->memc_br1 = CONFIG_SYS_BR1_PRELIM;
 #endif
 
 #if defined(CONFIG_IP860) /* disable CS0 now that Flash is mapped on CS1 */
 	memctl->memc_br0 = 0;
 #endif
 
-#if defined(CFG_OR2_PRELIM) && defined(CFG_BR2_PRELIM)
-	memctl->memc_or2 = CFG_OR2_PRELIM;
-	memctl->memc_br2 = CFG_BR2_PRELIM;
+#if defined(CONFIG_SYS_OR2_PRELIM) && defined(CONFIG_SYS_BR2_PRELIM)
+	memctl->memc_or2 = CONFIG_SYS_OR2_PRELIM;
+	memctl->memc_br2 = CONFIG_SYS_BR2_PRELIM;
 #endif
 
-#if defined(CFG_OR3_PRELIM) && defined(CFG_BR3_PRELIM)
-	memctl->memc_or3 = CFG_OR3_PRELIM;
-	memctl->memc_br3 = CFG_BR3_PRELIM;
+#if defined(CONFIG_SYS_OR3_PRELIM) && defined(CONFIG_SYS_BR3_PRELIM)
+	memctl->memc_or3 = CONFIG_SYS_OR3_PRELIM;
+	memctl->memc_br3 = CONFIG_SYS_BR3_PRELIM;
 #endif
 
-#if defined(CFG_OR4_PRELIM) && defined(CFG_BR4_PRELIM)
-	memctl->memc_or4 = CFG_OR4_PRELIM;
-	memctl->memc_br4 = CFG_BR4_PRELIM;
+#if defined(CONFIG_SYS_OR4_PRELIM) && defined(CONFIG_SYS_BR4_PRELIM)
+	memctl->memc_or4 = CONFIG_SYS_OR4_PRELIM;
+	memctl->memc_br4 = CONFIG_SYS_BR4_PRELIM;
 #endif
 
-#if defined(CFG_OR5_PRELIM) && defined(CFG_BR5_PRELIM)
-	memctl->memc_or5 = CFG_OR5_PRELIM;
-	memctl->memc_br5 = CFG_BR5_PRELIM;
+#if defined(CONFIG_SYS_OR5_PRELIM) && defined(CONFIG_SYS_BR5_PRELIM)
+	memctl->memc_or5 = CONFIG_SYS_OR5_PRELIM;
+	memctl->memc_br5 = CONFIG_SYS_BR5_PRELIM;
 #endif
 
-#if defined(CFG_OR6_PRELIM) && defined(CFG_BR6_PRELIM)
-	memctl->memc_or6 = CFG_OR6_PRELIM;
-	memctl->memc_br6 = CFG_BR6_PRELIM;
+#if defined(CONFIG_SYS_OR6_PRELIM) && defined(CONFIG_SYS_BR6_PRELIM)
+	memctl->memc_or6 = CONFIG_SYS_OR6_PRELIM;
+	memctl->memc_br6 = CONFIG_SYS_BR6_PRELIM;
 #endif
 
-#if defined(CFG_OR7_PRELIM) && defined(CFG_BR7_PRELIM)
-	memctl->memc_or7 = CFG_OR7_PRELIM;
-	memctl->memc_br7 = CFG_BR7_PRELIM;
+#if defined(CONFIG_SYS_OR7_PRELIM) && defined(CONFIG_SYS_BR7_PRELIM)
+	memctl->memc_or7 = CONFIG_SYS_OR7_PRELIM;
+	memctl->memc_br7 = CONFIG_SYS_BR7_PRELIM;
 #endif
 
 #endif /* ! CONFIG_MBX */
@@ -245,17 +245,17 @@ void cpu_init_f (volatile immap_t * immr)
 	rpxclassic_init ();
 #endif
 
-#if defined(CONFIG_RPXLITE) && defined(CFG_ENV_IS_IN_NVRAM)
+#if defined(CONFIG_RPXLITE) && defined(CONFIG_ENV_IS_IN_NVRAM)
 	rpxlite_init ();
 #endif
 
-#ifdef CFG_RCCR			/* must be done before cpm_load_patch() */
+#ifdef CONFIG_SYS_RCCR			/* must be done before cpm_load_patch() */
 	/* write config value */
-	immr->im_cpm.cp_rccr = CFG_RCCR;
+	immr->im_cpm.cp_rccr = CONFIG_SYS_RCCR;
 #endif
 
-#if defined(CFG_I2C_UCODE_PATCH) || defined(CFG_SPI_UCODE_PATCH) || \
-    defined(CFG_SMC_UCODE_PATCH)
+#if defined(CONFIG_SYS_I2C_UCODE_PATCH) || defined(CONFIG_SYS_SPI_UCODE_PATCH) || \
+    defined(CONFIG_SYS_SMC_UCODE_PATCH)
 	cpm_load_patch (immr);	/* load mpc8xx  microcode patch */
 #endif
 }
@@ -265,21 +265,21 @@ void cpu_init_f (volatile immap_t * immr)
  */
 int cpu_init_r (void)
 {
-#if defined(CFG_RTCSC) || defined(CFG_RMDS)
+#if defined(CONFIG_SYS_RTCSC) || defined(CONFIG_SYS_RMDS)
 	bd_t *bd = gd->bd;
 	volatile immap_t *immr = (volatile immap_t *) (bd->bi_immr_base);
 #endif
 
-#ifdef CFG_RTCSC
+#ifdef CONFIG_SYS_RTCSC
 	/* Unlock RTSC register */
 	immr->im_sitk.sitk_rtcsck = KAPWR_KEY;
 	/* write config value */
-	immr->im_sit.sit_rtcsc = CFG_RTCSC;
+	immr->im_sit.sit_rtcsc = CONFIG_SYS_RTCSC;
 #endif
 
-#ifdef CFG_RMDS
+#ifdef CONFIG_SYS_RMDS
 	/* write config value */
-	immr->im_cpm.cp_rmds = CFG_RMDS;
+	immr->im_cpm.cp_rmds = CONFIG_SYS_RMDS;
 #endif
 	return (0);
 }
diff --git a/cpu/mpc8xx/fec.c b/cpu/mpc8xx/fec.c
index 37eb481ff..89c1ff939 100644
--- a/cpu/mpc8xx/fec.c
+++ b/cpu/mpc8xx/fec.c
@@ -40,7 +40,7 @@ DECLARE_GLOBAL_DATA_PTR;
 #endif
 
 /* define WANT_MII when MII support is required */
-#if defined(CFG_DISCOVER_PHY) || defined(CONFIG_FEC1_PHY) || defined(CONFIG_FEC2_PHY)
+#if defined(CONFIG_SYS_DISCOVER_PHY) || defined(CONFIG_FEC1_PHY) || defined(CONFIG_FEC2_PHY)
 #define WANT_MII
 #else
 #undef WANT_MII
@@ -59,7 +59,7 @@ DECLARE_GLOBAL_DATA_PTR;
 #error RMII support is unusable without a working PHY.
 #endif
 
-#ifdef CFG_DISCOVER_PHY
+#ifdef CONFIG_SYS_DISCOVER_PHY
 static int mii_discover_phy(struct eth_device *dev);
 #endif
 
@@ -197,7 +197,7 @@ static int fec_send(struct eth_device* dev, volatile void *packet, int length)
 {
 	int j, rc;
 	struct ether_fcc_info_s *efis = dev->priv;
-	volatile fec_t *fecp = (volatile fec_t *)(CFG_IMMR + efis->fecp_offset);
+	volatile fec_t *fecp = (volatile fec_t *)(CONFIG_SYS_IMMR + efis->fecp_offset);
 
 	/* section 16.9.23.3
 	 * Wait for ready
@@ -248,7 +248,7 @@ static int fec_recv (struct eth_device *dev)
 {
 	struct ether_fcc_info_s *efis = dev->priv;
 	volatile fec_t *fecp =
-		(volatile fec_t *) (CFG_IMMR + efis->fecp_offset);
+		(volatile fec_t *) (CONFIG_SYS_IMMR + efis->fecp_offset);
 	int length;
 
 	for (;;) {
@@ -339,7 +339,7 @@ static inline void fec_10Mbps(struct eth_device *dev)
 	if ((unsigned int)fecidx >= 2)
 		hang();
 
-	((volatile immap_t *)CFG_IMMR)->im_cpm.cp_cptr |=  mask;
+	((volatile immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_cptr |=  mask;
 }
 
 static inline void fec_100Mbps(struct eth_device *dev)
@@ -351,7 +351,7 @@ static inline void fec_100Mbps(struct eth_device *dev)
 	if ((unsigned int)fecidx >= 2)
 		hang();
 
-	((volatile immap_t *)CFG_IMMR)->im_cpm.cp_cptr &= ~mask;
+	((volatile immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_cptr &= ~mask;
 }
 
 #endif
@@ -359,7 +359,7 @@ static inline void fec_100Mbps(struct eth_device *dev)
 static inline void fec_full_duplex(struct eth_device *dev)
 {
 	struct ether_fcc_info_s *efis = dev->priv;
-	volatile fec_t *fecp = (volatile fec_t *)(CFG_IMMR + efis->fecp_offset);
+	volatile fec_t *fecp = (volatile fec_t *)(CONFIG_SYS_IMMR + efis->fecp_offset);
 
 	fecp->fec_r_cntrl &= ~FEC_RCNTRL_DRT;
 	fecp->fec_x_cntrl |=  FEC_TCNTRL_FDEN;	/* FD enable */
@@ -368,7 +368,7 @@ static inline void fec_full_duplex(struct eth_device *dev)
 static inline void fec_half_duplex(struct eth_device *dev)
 {
 	struct ether_fcc_info_s *efis = dev->priv;
-	volatile fec_t *fecp = (volatile fec_t *)(CFG_IMMR + efis->fecp_offset);
+	volatile fec_t *fecp = (volatile fec_t *)(CONFIG_SYS_IMMR + efis->fecp_offset);
 
 	fecp->fec_r_cntrl |=  FEC_RCNTRL_DRT;
 	fecp->fec_x_cntrl &= ~FEC_TCNTRL_FDEN;	/* FD disable */
@@ -377,7 +377,7 @@ static inline void fec_half_duplex(struct eth_device *dev)
 static void fec_pin_init(int fecidx)
 {
 	bd_t           *bd = gd->bd;
-	volatile immap_t *immr = (immap_t *) CFG_IMMR;
+	volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
 	volatile fec_t *fecp;
 
 	/*
@@ -398,7 +398,7 @@ static void fec_pin_init(int fecidx)
 	 * * the MII management interface clock must be less than or equal
 	 * * to 2.5 MHz.
 	 * * This MDC frequency is equal to system clock / (2 * MII_SPEED).
-	 * * Then MII_SPEED = system_clock / 2 * 2,5 Mhz.
+	 * * Then MII_SPEED = system_clock / 2 * 2,5 MHz.
 	 *
 	 * All MII configuration is done via FEC1 registers:
 	 */
@@ -474,7 +474,7 @@ static void fec_pin_init(int fecidx)
 		 * Configure port A for MII.
 		 */
 
-#if defined(CONFIG_ICU862) && defined(CFG_DISCOVER_PHY)
+#if defined(CONFIG_ICU862) && defined(CONFIG_SYS_DISCOVER_PHY)
 
 		/*
 		 * On the ICU862 board the MII-MDC pin is routed to PD8 pin
@@ -569,9 +569,9 @@ static int fec_reset(volatile fec_t *fecp)
 static int fec_init (struct eth_device *dev, bd_t * bd)
 {
 	struct ether_fcc_info_s *efis = dev->priv;
-	volatile immap_t *immr = (immap_t *) CFG_IMMR;
+	volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
 	volatile fec_t *fecp =
-		(volatile fec_t *) (CFG_IMMR + efis->fecp_offset);
+		(volatile fec_t *) (CONFIG_SYS_IMMR + efis->fecp_offset);
 	int i;
 
 	if (efis->ether_index == 0) {
@@ -657,7 +657,7 @@ static int fec_init (struct eth_device *dev, bd_t * bd)
 	txIdx = 0;
 
 	if (!rtx) {
-#ifdef CFG_ALLOC_DPRAM
+#ifdef CONFIG_SYS_ALLOC_DPRAM
 		rtx = (RTXBD *) (immr->im_cpm.cp_dpmem +
 				 dpram_alloc_align (sizeof (RTXBD), 8));
 #else
@@ -721,7 +721,7 @@ static int fec_init (struct eth_device *dev, bd_t * bd)
 	fecp->fec_ecntrl = FEC_ECNTRL_PINMUX | FEC_ECNTRL_ETHER_EN;
 
 	if (efis->phy_addr == -1) {
-#ifdef CFG_DISCOVER_PHY
+#ifdef CONFIG_SYS_DISCOVER_PHY
 		/*
 		 * wait for the PHY to wake up after reset
 		 */
@@ -772,7 +772,7 @@ static int fec_init (struct eth_device *dev, bd_t * bd)
 static void fec_halt(struct eth_device* dev)
 {
 	struct ether_fcc_info_s *efis = dev->priv;
-	volatile fec_t *fecp = (volatile fec_t *)(CFG_IMMR + efis->fecp_offset);
+	volatile fec_t *fecp = (volatile fec_t *)(CONFIG_SYS_IMMR + efis->fecp_offset);
 	int i;
 
 	/* avoid halt if initialized; mii gets stuck otherwise */
@@ -801,7 +801,7 @@ static void fec_halt(struct eth_device* dev)
 	efis->initialized = 0;
 }
 
-#if defined(CFG_DISCOVER_PHY) || defined(CONFIG_MII) || defined(CONFIG_CMD_MII)
+#if defined(CONFIG_SYS_DISCOVER_PHY) || defined(CONFIG_MII) || defined(CONFIG_CMD_MII)
 
 /* Make MII read/write commands for the FEC.
 */
@@ -846,7 +846,7 @@ mii_send(uint mii_cmd)
 	volatile fec_t	*ep;
 	int cnt;
 
-	ep = &(((immap_t *)CFG_IMMR)->im_cpm.cp_fec);
+	ep = &(((immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_fec);
 
 	ep->fec_mii_data = mii_cmd;	/* command to phy */
 
@@ -868,7 +868,7 @@ mii_send(uint mii_cmd)
 }
 #endif
 
-#if defined(CFG_DISCOVER_PHY)
+#if defined(CONFIG_SYS_DISCOVER_PHY)
 static int mii_discover_phy(struct eth_device *dev)
 {
 #define MAX_PHY_PASSES 11
@@ -937,7 +937,7 @@ static int mii_discover_phy(struct eth_device *dev)
 	}
 	return phyaddr;
 }
-#endif	/* CFG_DISCOVER_PHY */
+#endif	/* CONFIG_SYS_DISCOVER_PHY */
 
 #if (defined(CONFIG_MII) || defined(CONFIG_CMD_MII)) && !defined(CONFIG_BITBANGMII)
 
@@ -948,7 +948,7 @@ static int mii_discover_phy(struct eth_device *dev)
  */
 static void __mii_init(void)
 {
-	volatile immap_t *immr = (immap_t *) CFG_IMMR;
+	volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
 	volatile fec_t *fecp = &(immr->im_cpm.cp_fec);
 
 	if (fec_reset(fecp) < 0)
diff --git a/cpu/mpc8xx/i2c.c b/cpu/mpc8xx/i2c.c
index f05b666b8..338cababe 100644
--- a/cpu/mpc8xx/i2c.c
+++ b/cpu/mpc8xx/i2c.c
@@ -42,19 +42,6 @@ DECLARE_GLOBAL_DATA_PTR;
 /* define to enable debug messages */
 #undef	DEBUG_I2C
 
-/*-----------------------------------------------------------------------
- * Set default values
- */
-#ifndef	CFG_I2C_SPEED
-#define	CFG_I2C_SPEED	50000
-#endif
-
-#ifndef	CFG_I2C_SLAVE
-#define	CFG_I2C_SLAVE	0xFE
-#endif
-/*-----------------------------------------------------------------------
- */
-
 /* tx/rx timeout (we need the i2c early, so we don't use get_timer()) */
 #define TOUT_LOOP 1000000
 
@@ -162,7 +149,7 @@ i2c_roundrate(int hz, int speed, int filter, int modval,
 static int
 i2c_setrate (int hz, int speed)
 {
-	immap_t		*immap = (immap_t *) CFG_IMMR;
+	immap_t		*immap = (immap_t *) CONFIG_SYS_IMMR;
 	volatile i2c8xx_t *i2c = (i2c8xx_t *) & immap->im_i2c;
 	int		brgval,
 			modval,		/* 0-3 */
@@ -207,7 +194,7 @@ i2c_setrate (int hz, int speed)
 void
 i2c_init(int speed, int slaveaddr)
 {
-	volatile immap_t *immap = (immap_t *)CFG_IMMR ;
+	volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR ;
 	volatile cpm8xx_t *cp = (cpm8xx_t *)&immap->im_cpm;
 	volatile i2c8xx_t *i2c	= (i2c8xx_t *)&immap->im_i2c;
 	volatile iic_t *iip = (iic_t *)&cp->cp_dparam[PROFF_IIC];
@@ -215,21 +202,21 @@ i2c_init(int speed, int slaveaddr)
 	volatile I2C_BD *rxbd, *txbd;
 	uint dpaddr;
 
-#ifdef CFG_I2C_INIT_BOARD
+#ifdef CONFIG_SYS_I2C_INIT_BOARD
 	/* call board specific i2c bus reset routine before accessing the   */
 	/* environment, which might be in a chip on that bus. For details   */
 	/* about this problem see doc/I2C_Edge_Conditions.                  */
 	i2c_init_board();
 #endif
 
-#ifdef CFG_I2C_UCODE_PATCH
+#ifdef CONFIG_SYS_I2C_UCODE_PATCH
 	iip = (iic_t *)&cp->cp_dpmem[iip->iic_rpbase];
 #else
 	/* Disable relocation */
 	iip->iic_rpbase = 0;
 #endif
 
-#ifdef CFG_ALLOC_DPRAM
+#ifdef CONFIG_SYS_ALLOC_DPRAM
 	dpaddr = iip->iic_rbase;
 	if (dpaddr == 0) {
 	    /* need to allocate dual port ram */
@@ -269,7 +256,7 @@ i2c_init(int speed, int slaveaddr)
 	 * divide BRGCLK by 1)
 	 */
 	PRINTD(("[I2C] Setting rate...\n"));
-	i2c_setrate (gd->cpu_clk, CFG_I2C_SPEED) ;
+	i2c_setrate (gd->cpu_clk, CONFIG_SYS_I2C_SPEED) ;
 
 	/* Set I2C controller in master mode */
 	i2c->i2c_i2com = 0x01;
@@ -295,7 +282,7 @@ i2c_init(int speed, int slaveaddr)
 	/* Set maximum receive size. */
 	iip->iic_mrblr = I2C_RXTX_LEN;
 
-#ifdef CFG_I2C_UCODE_PATCH
+#ifdef CONFIG_SYS_I2C_UCODE_PATCH
 	/*
 	 *  Initialize required parameters if using microcode patch.
 	 */
@@ -318,13 +305,13 @@ i2c_init(int speed, int slaveaddr)
 static void
 i2c_newio(i2c_state_t *state)
 {
-	volatile immap_t *immap = (immap_t *)CFG_IMMR ;
+	volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR ;
 	volatile cpm8xx_t *cp = (cpm8xx_t *)&immap->im_cpm;
 	volatile iic_t *iip = (iic_t *)&cp->cp_dparam[PROFF_IIC];
 
 	PRINTD(("[I2C] i2c_newio\n"));
 
-#ifdef CFG_I2C_UCODE_PATCH
+#ifdef CONFIG_SYS_I2C_UCODE_PATCH
 	iip = (iic_t *)&cp->cp_dpmem[iip->iic_rpbase];
 #endif
 	state->rx_idx = 0;
@@ -492,7 +479,7 @@ i2c_receive(i2c_state_t *state,
 
 static int i2c_doio(i2c_state_t *state)
 {
-	volatile immap_t *immap = (immap_t *)CFG_IMMR ;
+	volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR ;
 	volatile cpm8xx_t *cp = (cpm8xx_t *)&immap->im_cpm;
 	volatile i2c8xx_t *i2c	= (i2c8xx_t *)&immap->im_i2c;
 	volatile iic_t *iip = (iic_t *)&cp->cp_dparam[PROFF_IIC];
@@ -501,7 +488,7 @@ static int i2c_doio(i2c_state_t *state)
 
 	PRINTD(("[I2C] i2c_doio\n"));
 
-#ifdef CFG_I2C_UCODE_PATCH
+#ifdef CONFIG_SYS_I2C_UCODE_PATCH
 	iip = (iic_t *)&cp->cp_dpmem[iip->iic_rpbase];
 #endif
 
@@ -593,7 +580,7 @@ int i2c_probe(uchar chip)
 	int rc;
 	uchar buf[1];
 
-	i2c_init(CFG_I2C_SPEED, CFG_I2C_SLAVE);
+	i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
 
 	i2c_newio(&state);
 
@@ -628,7 +615,7 @@ int i2c_read(uchar chip, uint addr, int alen, uchar *buffer, int len)
 	xaddr[2] = (addr >>  8) & 0xFF;
 	xaddr[3] =  addr        & 0xFF;
 
-#ifdef CFG_I2C_EEPROM_ADDR_OVERFLOW
+#ifdef CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW
 	/*
 	 * EEPROM chips that implement "address overflow" are ones like
 	 * Catalyst 24WC04/08/16 which has 9/10/11 bits of address and the
@@ -639,7 +626,7 @@ int i2c_read(uchar chip, uint addr, int alen, uchar *buffer, int len)
 	 * be one byte because the extra address bits are hidden in the
 	 * chip address.
 	 */
-	 chip |= ((addr >> (alen * 8)) & CFG_I2C_EEPROM_ADDR_OVERFLOW);
+	 chip |= ((addr >> (alen * 8)) & CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW);
 #endif
 
 	i2c_newio(&state);
@@ -678,7 +665,7 @@ int i2c_write(uchar chip, uint addr, int alen, uchar *buffer, int len)
 	xaddr[2] = (addr >>  8) & 0xFF;
 	xaddr[3] =  addr        & 0xFF;
 
-#ifdef CFG_I2C_EEPROM_ADDR_OVERFLOW
+#ifdef CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW
 	/*
 	 * EEPROM chips that implement "address overflow" are ones like
 	 * Catalyst 24WC04/08/16 which has 9/10/11 bits of address and the
@@ -689,7 +676,7 @@ int i2c_write(uchar chip, uint addr, int alen, uchar *buffer, int len)
 	 * be one byte because the extra address bits are hidden in the
 	 * chip address.
 	 */
-	 chip |= ((addr >> (alen * 8)) & CFG_I2C_EEPROM_ADDR_OVERFLOW);
+	 chip |= ((addr >> (alen * 8)) & CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW);
 #endif
 
 	i2c_newio(&state);
@@ -717,24 +704,4 @@ int i2c_write(uchar chip, uint addr, int alen, uchar *buffer, int len)
 	return 0;
 }
 
-uchar
-i2c_reg_read(uchar i2c_addr, uchar reg)
-{
-	uchar buf;
-
-	i2c_init(CFG_I2C_SPEED, CFG_I2C_SLAVE);
-
-	i2c_read(i2c_addr, reg, 1, &buf, 1);
-
-	return (buf);
-}
-
-void
-i2c_reg_write(uchar i2c_addr, uchar reg, uchar val)
-{
-	i2c_init(CFG_I2C_SPEED, CFG_I2C_SLAVE);
-
-	i2c_write(i2c_addr, reg, 1, &val, 1);
-}
-
 #endif	/* CONFIG_HARD_I2C */
diff --git a/cpu/mpc8xx/interrupts.c b/cpu/mpc8xx/interrupts.c
index 20e7012c3..5daa6b275 100644
--- a/cpu/mpc8xx/interrupts.c
+++ b/cpu/mpc8xx/interrupts.c
@@ -47,9 +47,9 @@ static void cpm_interrupt (void *regs);
 
 int interrupt_init_cpu (unsigned *decrementer_count)
 {
-	volatile immap_t *immr = (immap_t *) CFG_IMMR;
+	volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
 
-	*decrementer_count = get_tbclk () / CFG_HZ;
+	*decrementer_count = get_tbclk () / CONFIG_SYS_HZ;
 
 	/* disable all interrupts */
 	immr->im_siu_conf.sc_simask = 0;
@@ -67,7 +67,7 @@ int interrupt_init_cpu (unsigned *decrementer_count)
  */
 void external_interrupt (struct pt_regs *regs)
 {
-	volatile immap_t *immr = (immap_t *) CFG_IMMR;
+	volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
 	int irq;
 	ulong simask, newmask;
 	ulong vec, v_bit;
@@ -124,7 +124,7 @@ void external_interrupt (struct pt_regs *regs)
  */
 static void cpm_interrupt (void *regs)
 {
-	volatile immap_t *immr = (immap_t *) CFG_IMMR;
+	volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
 	uint vec;
 
 	/*
@@ -165,7 +165,7 @@ static void cpm_error_interrupt (void *dummy)
 void irq_install_handler (int vec, interrupt_handler_t * handler,
 						  void *arg)
 {
-	volatile immap_t *immr = (immap_t *) CFG_IMMR;
+	volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
 
 	if ((vec & CPMVEC_OFFSET) != 0) {
 		/* CPM interrupt */
@@ -202,7 +202,7 @@ void irq_install_handler (int vec, interrupt_handler_t * handler,
 
 void irq_free_handler (int vec)
 {
-	volatile immap_t *immr = (immap_t *) CFG_IMMR;
+	volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
 
 	if ((vec & CPMVEC_OFFSET) != 0) {
 		/* CPM interrupt */
@@ -230,7 +230,7 @@ void irq_free_handler (int vec)
 
 static void cpm_interrupt_init (void)
 {
-	volatile immap_t *immr = (immap_t *) CFG_IMMR;
+	volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
 
 	/*
 	 * Initialize the CPM interrupt controller.
@@ -266,7 +266,7 @@ static void cpm_interrupt_init (void)
  */
 void timer_interrupt_cpu (struct pt_regs *regs)
 {
-	volatile immap_t *immr = (immap_t *) CFG_IMMR;
+	volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
 
 #if 0
 	printf ("*** Timer Interrupt *** ");
diff --git a/cpu/mpc8xx/kgdb.S b/cpu/mpc8xx/kgdb.S
index 812baa3ec..2cc8fe63c 100644
--- a/cpu/mpc8xx/kgdb.S
+++ b/cpu/mpc8xx/kgdb.S
@@ -52,21 +52,21 @@ kgdb_flush_cache_all:
 
 	.globl	kgdb_flush_cache_range
 kgdb_flush_cache_range:
-	li	r5,CFG_CACHELINE_SIZE-1
+	li	r5,CONFIG_SYS_CACHELINE_SIZE-1
 	andc	r3,r3,r5
 	subf	r4,r3,r4
 	add	r4,r4,r5
-	srwi.	r4,r4,CFG_CACHELINE_SHIFT
+	srwi.	r4,r4,CONFIG_SYS_CACHELINE_SHIFT
 	beqlr
 	mtctr	r4
 	mr	r6,r3
 1:	dcbst	0,r3
-	addi	r3,r3,CFG_CACHELINE_SIZE
+	addi	r3,r3,CONFIG_SYS_CACHELINE_SIZE
 	bdnz	1b
 	sync				/* wait for dcbst's to get to ram */
 	mtctr	r4
 2:	icbi	0,r6
-	addi	r6,r6,CFG_CACHELINE_SIZE
+	addi	r6,r6,CONFIG_SYS_CACHELINE_SIZE
 	bdnz	2b
 	SYNC
 	blr
diff --git a/cpu/mpc8xx/lcd.c b/cpu/mpc8xx/lcd.c
index 3c64a9ba4..4474e24e2 100644
--- a/cpu/mpc8xx/lcd.c
+++ b/cpu/mpc8xx/lcd.c
@@ -63,7 +63,7 @@
 #define LCD_BPP	LCD_COLOR4
 
 vidinfo_t panel_info = {
-    640, 480, 132, 99, CFG_HIGH, CFG_HIGH, CFG_HIGH, CFG_HIGH, CFG_HIGH,
+    640, 480, 132, 99, CONFIG_SYS_HIGH, CONFIG_SYS_HIGH, CONFIG_SYS_HIGH, CONFIG_SYS_HIGH, CONFIG_SYS_HIGH,
     LCD_BPP, 1, 0, 1, 0,  5, 0, 0, 0
 		/* wbl, vpw, lcdac, wbf */
 };
@@ -76,7 +76,7 @@ vidinfo_t panel_info = {
  *  Hitachi SP19X001-. Active, color, single scan.
  */
 vidinfo_t panel_info = {
-    640, 480, 154, 116, CFG_HIGH, CFG_HIGH, CFG_HIGH, CFG_HIGH, CFG_HIGH,
+    640, 480, 154, 116, CONFIG_SYS_HIGH, CONFIG_SYS_HIGH, CONFIG_SYS_HIGH, CONFIG_SYS_HIGH, CONFIG_SYS_HIGH,
     LCD_COLOR8, 1, 0, 1, 0, 0, 0, 0, 0
 		/* wbl, vpw, lcdac, wbf */
 };
@@ -89,7 +89,7 @@ vidinfo_t panel_info = {
  *  NEC NL6448AC33-18. Active, color, single scan.
  */
 vidinfo_t panel_info = {
-    640, 480, 132, 99, CFG_HIGH, CFG_HIGH, CFG_LOW, CFG_LOW, CFG_HIGH,
+    640, 480, 132, 99, CONFIG_SYS_HIGH, CONFIG_SYS_HIGH, CONFIG_SYS_LOW, CONFIG_SYS_LOW, CONFIG_SYS_HIGH,
     3, 0, 0, 1, 1, 144, 2, 0, 33
 		/* wbl, vpw, lcdac, wbf */
 };
@@ -101,7 +101,7 @@ vidinfo_t panel_info = {
  *  NEC NL6448BC20-08.  6.5", 640x480. Active, color, single scan.
  */
 vidinfo_t panel_info = {
-    640, 480, 132, 99, CFG_HIGH, CFG_HIGH, CFG_LOW, CFG_LOW, CFG_HIGH,
+    640, 480, 132, 99, CONFIG_SYS_HIGH, CONFIG_SYS_HIGH, CONFIG_SYS_LOW, CONFIG_SYS_LOW, CONFIG_SYS_HIGH,
     3, 0, 0, 1, 1, 144, 2, 0, 33
 		/* wbl, vpw, lcdac, wbf */
 };
@@ -113,7 +113,7 @@ vidinfo_t panel_info = {
  *  NEC NL6448BC33-54. 10.4", 640x480. Active, color, single scan.
  */
 vidinfo_t panel_info = {
-    640, 480, 212, 158, CFG_HIGH, CFG_HIGH, CFG_LOW, CFG_LOW, CFG_HIGH,
+    640, 480, 212, 158, CONFIG_SYS_HIGH, CONFIG_SYS_HIGH, CONFIG_SYS_LOW, CONFIG_SYS_LOW, CONFIG_SYS_HIGH,
     3, 0, 0, 1, 1, 144, 2, 0, 33
 		/* wbl, vpw, lcdac, wbf */
 };
@@ -125,7 +125,7 @@ vidinfo_t panel_info = {
  *  SHARP LQ104V7DS01. 6.5", 640x480. Active, color, single scan.
  */
 vidinfo_t panel_info = {
-    640, 480, 132, 99, CFG_HIGH, CFG_HIGH, CFG_LOW, CFG_LOW, CFG_LOW,
+    640, 480, 132, 99, CONFIG_SYS_HIGH, CONFIG_SYS_HIGH, CONFIG_SYS_LOW, CONFIG_SYS_LOW, CONFIG_SYS_LOW,
     3, 0, 0, 1, 1, 25, 1, 0, 33
 		/* wbl, vpw, lcdac, wbf */
 };
@@ -138,7 +138,7 @@ vidinfo_t panel_info = {
  * not sure what it is.......
  */
 vidinfo_t panel_info = {
-    320, 240, 0, 0, CFG_HIGH, CFG_HIGH, CFG_HIGH, CFG_HIGH, CFG_HIGH,
+    320, 240, 0, 0, CONFIG_SYS_HIGH, CONFIG_SYS_HIGH, CONFIG_SYS_HIGH, CONFIG_SYS_HIGH, CONFIG_SYS_HIGH,
     3, 0, 0, 1, 1, 15, 4, 0, 3
 };
 #endif /* CONFIG_SHARP_16x9 */
@@ -152,7 +152,7 @@ vidinfo_t panel_info = {
 #define LCD_DF 12
 
 vidinfo_t panel_info = {
-    320, 240, 0, 0, CFG_HIGH, CFG_HIGH, CFG_LOW, CFG_LOW, CFG_HIGH,
+    320, 240, 0, 0, CONFIG_SYS_HIGH, CONFIG_SYS_HIGH, CONFIG_SYS_LOW, CONFIG_SYS_LOW, CONFIG_SYS_HIGH,
     3, 0, 0, 1, 1, 15, 4, 0, 3
 		/* wbl, vpw, lcdac, wbf */
 };
@@ -165,7 +165,7 @@ vidinfo_t panel_info = {
  * Sharp LQ64D341 display, 640x480. Active, color, single scan.
  */
 vidinfo_t panel_info = {
-    640, 480, 0, 0, CFG_HIGH, CFG_HIGH, CFG_LOW, CFG_LOW, CFG_HIGH,
+    640, 480, 0, 0, CONFIG_SYS_HIGH, CONFIG_SYS_HIGH, CONFIG_SYS_LOW, CONFIG_SYS_LOW, CONFIG_SYS_HIGH,
     3, 0, 0, 1, 1, 128, 16, 0, 32
 		/* wbl, vpw, lcdac, wbf */
 };
@@ -176,7 +176,7 @@ vidinfo_t panel_info = {
  * Sharp LQ065T9DR51U display, 400x240. Active, color, single scan.
  */
 vidinfo_t panel_info = {
-    400, 240, 143, 79, CFG_HIGH, CFG_HIGH, CFG_HIGH, CFG_HIGH, CFG_HIGH,
+    400, 240, 143, 79, CONFIG_SYS_HIGH, CONFIG_SYS_HIGH, CONFIG_SYS_HIGH, CONFIG_SYS_HIGH, CONFIG_SYS_HIGH,
     3, 0, 0, 1, 1, 248, 4, 0, 35
 		/* wbl, vpw, lcdac, wbf */
 };
@@ -188,7 +188,7 @@ vidinfo_t panel_info = {
  * Sharp LQ084V1DG21 display, 640x480. Active, color, single scan.
  */
 vidinfo_t panel_info = {
-    640, 480, 171, 129, CFG_HIGH, CFG_HIGH, CFG_LOW, CFG_LOW, CFG_LOW,
+    640, 480, 171, 129, CONFIG_SYS_HIGH, CONFIG_SYS_HIGH, CONFIG_SYS_LOW, CONFIG_SYS_LOW, CONFIG_SYS_LOW,
     3, 0, 0, 1, 1, 160, 3, 0, 48
 		/* wbl, vpw, lcdac, wbf */
 };
@@ -201,7 +201,7 @@ vidinfo_t panel_info = {
  * HLD1045 display, 640x480. Active, color, single scan.
  */
 vidinfo_t panel_info = {
-    640, 480, 0, 0, CFG_HIGH, CFG_HIGH, CFG_LOW, CFG_LOW, CFG_HIGH,
+    640, 480, 0, 0, CONFIG_SYS_HIGH, CONFIG_SYS_HIGH, CONFIG_SYS_LOW, CONFIG_SYS_LOW, CONFIG_SYS_HIGH,
     3, 0, 0, 1, 1, 160, 3, 0, 48
 		/* wbl, vpw, lcdac, wbf */
 };
@@ -213,7 +213,7 @@ vidinfo_t panel_info = {
  * Prime View V16C6448AC
  */
 vidinfo_t panel_info = {
-    640, 480, 130, 98, CFG_HIGH, CFG_HIGH, CFG_LOW, CFG_LOW, CFG_HIGH,
+    640, 480, 130, 98, CONFIG_SYS_HIGH, CONFIG_SYS_HIGH, CONFIG_SYS_LOW, CONFIG_SYS_LOW, CONFIG_SYS_HIGH,
     3, 0, 0, 1, 1, 144, 2, 0, 35
 		/* wbl, vpw, lcdac, wbf */
 };
@@ -235,7 +235,7 @@ vidinfo_t panel_info = {
 				/* 1 -  4 grey levels, 2 bpp */
 				/* 2 - 16 grey levels, 4 bpp */
 vidinfo_t panel_info = {
-    320, 240, 0, 0, CFG_HIGH, CFG_HIGH, CFG_HIGH, CFG_HIGH, CFG_LOW,
+    320, 240, 0, 0, CONFIG_SYS_HIGH, CONFIG_SYS_HIGH, CONFIG_SYS_HIGH, CONFIG_SYS_HIGH, CONFIG_SYS_LOW,
     OPTREX_BPP, 0, 0, 0, 0, 0, 0, 0, 0, 4
 };
 #endif /* CONFIG_OPTREX_BW */
@@ -249,7 +249,7 @@ vidinfo_t panel_info = {
 #define LCD_DF		10
 
 vidinfo_t panel_info = {
-    320, 240, 0, 0, CFG_HIGH, CFG_HIGH, CFG_HIGH, CFG_HIGH, CFG_LOW,
+    320, 240, 0, 0, CONFIG_SYS_HIGH, CONFIG_SYS_HIGH, CONFIG_SYS_HIGH, CONFIG_SYS_HIGH, CONFIG_SYS_LOW,
     LCD_BPP,  0, 0, 0, 0, 33, 0, 0, 0
 };
 #endif
@@ -307,7 +307,7 @@ ulong calc_fbsize (void)
 
 void lcd_ctrl_init (void *lcdbase)
 {
-	volatile immap_t *immr = (immap_t *) CFG_IMMR;
+	volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
 	volatile lcd823_t *lcdp = &immr->im_lcd;
 
 	uint lccrtmp;
@@ -320,7 +320,7 @@ void lcd_ctrl_init (void *lcdbase)
 
 #ifdef CONFIG_RPXLITE
 	/* This is special for RPXlite_DW Software Development Platform **[Sam]** */
-	panel_info.vl_dp = CFG_LOW;
+	panel_info.vl_dp = CONFIG_SYS_LOW;
 #endif
 
 	lccrtmp  = LCDBIT (LCCR_BNUM_BIT,
@@ -436,14 +436,14 @@ void lcd_ctrl_init (void *lcdbase)
 static void
 lcd_getcolreg (ushort regno, ushort *red, ushort *green, ushort *blue)
 {
-	volatile immap_t *immr = (immap_t *) CFG_IMMR;
+	volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
 	volatile cpm8xx_t *cp = &(immr->im_cpm);
 	unsigned short colreg, *cmap_ptr;
 
 	cmap_ptr = (unsigned short *)&cp->lcd_cmap[regno * 2];
 
 	colreg = *cmap_ptr;
-#ifdef	CFG_INVERT_COLORS
+#ifdef	CONFIG_SYS_INVERT_COLORS
 	colreg ^= 0x0FFF;
 #endif
 
@@ -459,7 +459,7 @@ lcd_getcolreg (ushort regno, ushort *red, ushort *green, ushort *blue)
 void
 lcd_setcolreg (ushort regno, ushort red, ushort green, ushort blue)
 {
-	volatile immap_t *immr = (immap_t *) CFG_IMMR;
+	volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
 	volatile cpm8xx_t *cp = &(immr->im_cpm);
 	unsigned short colreg, *cmap_ptr;
 
@@ -468,7 +468,7 @@ lcd_setcolreg (ushort regno, ushort red, ushort green, ushort blue)
 	colreg = ((red   & 0x0F) << 8) |
 		 ((green & 0x0F) << 4) |
 		  (blue  & 0x0F) ;
-#ifdef	CFG_INVERT_COLORS
+#ifdef	CONFIG_SYS_INVERT_COLORS
 	colreg ^= 0x0FFF;
 #endif
 	*cmap_ptr = colreg;
@@ -486,7 +486,7 @@ lcd_setcolreg (ushort regno, ushort red, ushort green, ushort blue)
 static
 void lcd_initcolregs (void)
 {
-	volatile immap_t *immr = (immap_t *) CFG_IMMR;
+	volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
 	volatile cpm8xx_t *cp = &(immr->im_cpm);
 	ushort regno;
 
@@ -501,7 +501,7 @@ void lcd_initcolregs (void)
 
 void lcd_enable (void)
 {
-	volatile immap_t *immr = (immap_t *) CFG_IMMR;
+	volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
 	volatile lcd823_t *lcdp = &immr->im_lcd;
 
 	/* Enable the LCD panel */
@@ -521,7 +521,7 @@ void lcd_enable (void)
 
 #if defined(CONFIG_LWMON)
     {	uchar c = pic_read (0x60);
-#if defined(CONFIG_LCD) && defined(CONFIG_LWMON) && (CONFIG_POST & CFG_POST_SYSMON)
+#if defined(CONFIG_LCD) && defined(CONFIG_LWMON) && (CONFIG_POST & CONFIG_SYS_POST_SYSMON)
 	/* Enable LCD later in sysmon test, only if temperature is OK */
 #else
 	c |= 0x07;	/* Power on CCFL, Enable CCFL, Chip Enable LCD */
@@ -586,7 +586,7 @@ void lcd_enable (void)
 #if defined (CONFIG_RBC823)
 void lcd_disable (void)
 {
-	volatile immap_t *immr = (immap_t *) CFG_IMMR;
+	volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
 	volatile lcd823_t *lcdp = &immr->im_lcd;
 
 #if defined(CONFIG_LWMON)
diff --git a/cpu/mpc8xx/scc.c b/cpu/mpc8xx/scc.c
index 09a3db107..effb967e3 100644
--- a/cpu/mpc8xx/scc.c
+++ b/cpu/mpc8xx/scc.c
@@ -191,7 +191,7 @@ static int scc_init (struct eth_device *dev, bd_t * bis)
 	int i;
 	scc_enet_t *pram_ptr;
 
-	volatile immap_t *immr = (immap_t *) CFG_IMMR;
+	volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
 
 #if defined(CONFIG_LWMON)
 	reset_phy();
@@ -215,12 +215,14 @@ static int scc_init (struct eth_device *dev, bd_t * bis)
 	rxIdx = 0;
 	txIdx = 0;
 
-#ifdef CFG_ALLOC_DPRAM
-	rtx = (RTXBD *) (immr->im_cpm.cp_dpmem +
-			 dpram_alloc_align (sizeof (RTXBD), 8));
+	if (!rtx) {
+#ifdef CONFIG_SYS_ALLOC_DPRAM
+		rtx = (RTXBD *) (immr->im_cpm.cp_dpmem +
+				 dpram_alloc_align (sizeof (RTXBD), 8));
 #else
-	rtx = (RTXBD *) (immr->im_cpm.cp_dpmem + CPM_SCC_BASE);
-#endif /* 0 */
+		rtx = (RTXBD *) (immr->im_cpm.cp_dpmem + CPM_SCC_BASE);
+#endif
+	}
 
 #if (defined(PA_ENET_RXD) && defined(PA_ENET_TXD))
 	/* Configure port A pins for Txd and Rxd.
@@ -550,7 +552,7 @@ static int scc_init (struct eth_device *dev, bd_t * bis)
 
 static void scc_halt (struct eth_device *dev)
 {
-	volatile immap_t *immr = (immap_t *) CFG_IMMR;
+	volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
 
 	immr->im_cpm.cp_scc[SCC_ENET].scc_gsmrl &=
 		~(SCC_GSMRL_ENR | SCC_GSMRL_ENT);
@@ -561,7 +563,7 @@ static void scc_halt (struct eth_device *dev)
 #if 0
 void restart (void)
 {
-	volatile immap_t *immr = (immap_t *) CFG_IMMR;
+	volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
 
 	immr->im_cpm.cp_scc[SCC_ENET].scc_gsmrl |=
 		(SCC_GSMRL_ENR | SCC_GSMRL_ENT);
diff --git a/cpu/mpc8xx/serial.c b/cpu/mpc8xx/serial.c
index ad0229999..bd90dcd3b 100644
--- a/cpu/mpc8xx/serial.c
+++ b/cpu/mpc8xx/serial.c
@@ -70,12 +70,12 @@ static void serial_setdivisor(volatile cpm8xx_t *cp)
 	int divisor=(gd->cpu_clk + 8*gd->baudrate)/16/gd->baudrate;
 
 	if(divisor/16>0x1000) {
-		/* bad divisor, assume 50Mhz clock and 9600 baud */
+		/* bad divisor, assume 50MHz clock and 9600 baud */
 		divisor=(50*1000*1000 + 8*9600)/16/9600;
 	}
 
-#ifdef CFG_BRGCLK_PRESCALE
-	divisor /= CFG_BRGCLK_PRESCALE;
+#ifdef CONFIG_SYS_BRGCLK_PRESCALE
+	divisor /= CONFIG_SYS_BRGCLK_PRESCALE;
 #endif
 
 	if(divisor<=0x1000) {
@@ -94,7 +94,7 @@ static void serial_setdivisor(volatile cpm8xx_t *cp)
 
 static void smc_setbrg (void)
 {
-	volatile immap_t *im = (immap_t *)CFG_IMMR;
+	volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
 	volatile cpm8xx_t *cp = &(im->im_cpm);
 
 	/* Set up the baud rate generator.
@@ -110,7 +110,7 @@ static void smc_setbrg (void)
 
 static int smc_init (void)
 {
-	volatile immap_t *im = (immap_t *)CFG_IMMR;
+	volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
 	volatile smc_t *sp;
 	volatile smc_uart_t *up;
 	volatile cbd_t *tbdf, *rbdf;
@@ -124,7 +124,7 @@ static int smc_init (void)
 
 	sp = (smc_t *) &(cp->cp_smc[SMC_INDEX]);
 	up = (smc_uart_t *) &cp->cp_dparam[PROFF_SMC];
-#ifdef CFG_SMC_UCODE_PATCH
+#ifdef CONFIG_SYS_SMC_UCODE_PATCH
 	up = (smc_uart_t *) &cp->cp_dpmem[up->smc_rpbase];
 #else
 	/* Disable relocation */
@@ -140,15 +140,15 @@ static int smc_init (void)
 	im->im_siu_conf.sc_sdcr = 1;
 
 	/* clear error conditions */
-#ifdef	CFG_SDSR
-	im->im_sdma.sdma_sdsr = CFG_SDSR;
+#ifdef	CONFIG_SYS_SDSR
+	im->im_sdma.sdma_sdsr = CONFIG_SYS_SDSR;
 #else
 	im->im_sdma.sdma_sdsr = 0x83;
 #endif
 
 	/* clear SDMA interrupt mask */
-#ifdef	CFG_SDMR
-	im->im_sdma.sdma_sdmr = CFG_SDMR;
+#ifdef	CONFIG_SYS_SDMR
+	im->im_sdma.sdma_sdmr = CONFIG_SYS_SDMR;
 #else
 	im->im_sdma.sdma_sdmr = 0x00;
 #endif
@@ -193,7 +193,7 @@ static int smc_init (void)
 	 * the buffer descriptors.
 	 */
 
-#ifdef CFG_ALLOC_DPRAM
+#ifdef CONFIG_SYS_ALLOC_DPRAM
 	dpaddr = dpram_alloc_align (sizeof(cbd_t)*2 + 2, 8) ;
 #else
 	dpaddr = CPM_SERIAL_BASE ;
@@ -218,7 +218,7 @@ static int smc_init (void)
 	up->smc_tbase = dpaddr+sizeof(cbd_t);
 	up->smc_rfcr = SMC_EB;
 	up->smc_tfcr = SMC_EB;
-#if defined (CFG_SMC_UCODE_PATCH)
+#if defined (CONFIG_SYS_SMC_UCODE_PATCH)
 	up->smc_rbptr = up->smc_rbase;
 	up->smc_tbptr = up->smc_tbase;
 	up->smc_rstate = 0;
@@ -239,11 +239,11 @@ static int smc_init (void)
 	sp->smc_smcm = 0;
 	sp->smc_smce = 0xff;
 
-#ifdef CFG_SPC1920_SMC1_CLK4
+#ifdef CONFIG_SYS_SPC1920_SMC1_CLK4
 	/* clock source is PLD */
 
 	/* set freq to 19200 Baud */
-	*((volatile uchar *) CFG_SPC1920_PLD_BASE+6) = 0x3;
+	*((volatile uchar *) CONFIG_SYS_SPC1920_PLD_BASE+6) = 0x3;
 	/* configure clk4 as input */
 	im->im_ioport.iop_pdpar |= 0x800;
 	im->im_ioport.iop_pddir &= ~0x800;
@@ -288,7 +288,7 @@ smc_putc(const char c)
 	volatile cbd_t		*tbdf;
 	volatile char		*buf;
 	volatile smc_uart_t	*up;
-	volatile immap_t	*im = (immap_t *)CFG_IMMR;
+	volatile immap_t	*im = (immap_t *)CONFIG_SYS_IMMR;
 	volatile cpm8xx_t	*cpmp = &(im->im_cpm);
 
 #ifdef CONFIG_MODEM_SUPPORT
@@ -300,7 +300,7 @@ smc_putc(const char c)
 		smc_putc ('\r');
 
 	up = (smc_uart_t *)&cpmp->cp_dparam[PROFF_SMC];
-#ifdef CFG_SMC_UCODE_PATCH
+#ifdef CONFIG_SYS_SMC_UCODE_PATCH
 	up = (smc_uart_t *) &cpmp->cp_dpmem[up->smc_rpbase];
 #endif
 
@@ -336,12 +336,12 @@ smc_getc(void)
 	volatile cbd_t		*rbdf;
 	volatile unsigned char	*buf;
 	volatile smc_uart_t	*up;
-	volatile immap_t	*im = (immap_t *)CFG_IMMR;
+	volatile immap_t	*im = (immap_t *)CONFIG_SYS_IMMR;
 	volatile cpm8xx_t	*cpmp = &(im->im_cpm);
 	unsigned char		c;
 
 	up = (smc_uart_t *)&cpmp->cp_dparam[PROFF_SMC];
-#ifdef CFG_SMC_UCODE_PATCH
+#ifdef CONFIG_SYS_SMC_UCODE_PATCH
 	up = (smc_uart_t *) &cpmp->cp_dpmem[up->smc_rpbase];
 #endif
 
@@ -365,11 +365,11 @@ smc_tstc(void)
 {
 	volatile cbd_t		*rbdf;
 	volatile smc_uart_t	*up;
-	volatile immap_t	*im = (immap_t *)CFG_IMMR;
+	volatile immap_t	*im = (immap_t *)CONFIG_SYS_IMMR;
 	volatile cpm8xx_t	*cpmp = &(im->im_cpm);
 
 	up = (smc_uart_t *)&cpmp->cp_dparam[PROFF_SMC];
-#ifdef CFG_SMC_UCODE_PATCH
+#ifdef CONFIG_SYS_SMC_UCODE_PATCH
 	up = (smc_uart_t *) &cpmp->cp_dpmem[up->smc_rpbase];
 #endif
 
@@ -398,7 +398,7 @@ struct serial_device serial_smc_device =
 static void
 scc_setbrg (void)
 {
-	volatile immap_t *im = (immap_t *)CFG_IMMR;
+	volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
 	volatile cpm8xx_t *cp = &(im->im_cpm);
 
 	/* Set up the baud rate generator.
@@ -414,7 +414,7 @@ scc_setbrg (void)
 
 static int scc_init (void)
 {
-	volatile immap_t *im = (immap_t *)CFG_IMMR;
+	volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
 	volatile scc_t *sp;
 	volatile scc_uart_t *up;
 	volatile cbd_t *tbdf, *rbdf;
@@ -474,7 +474,7 @@ static int scc_init (void)
 	/* Allocate space for two buffer descriptors in the DP ram.
 	 */
 
-#ifdef CFG_ALLOC_DPRAM
+#ifdef CONFIG_SYS_ALLOC_DPRAM
 	dpaddr = dpram_alloc_align (sizeof(cbd_t)*2 + 2, 8) ;
 #else
 	dpaddr = CPM_SERIAL2_BASE ;
@@ -580,7 +580,7 @@ scc_putc(const char c)
 	volatile cbd_t		*tbdf;
 	volatile char		*buf;
 	volatile scc_uart_t	*up;
-	volatile immap_t	*im = (immap_t *)CFG_IMMR;
+	volatile immap_t	*im = (immap_t *)CONFIG_SYS_IMMR;
 	volatile cpm8xx_t	*cpmp = &(im->im_cpm);
 
 #ifdef CONFIG_MODEM_SUPPORT
@@ -625,7 +625,7 @@ scc_getc(void)
 	volatile cbd_t		*rbdf;
 	volatile unsigned char	*buf;
 	volatile scc_uart_t	*up;
-	volatile immap_t	*im = (immap_t *)CFG_IMMR;
+	volatile immap_t	*im = (immap_t *)CONFIG_SYS_IMMR;
 	volatile cpm8xx_t	*cpmp = &(im->im_cpm);
 	unsigned char		c;
 
@@ -651,7 +651,7 @@ scc_tstc(void)
 {
 	volatile cbd_t		*rbdf;
 	volatile scc_uart_t	*up;
-	volatile immap_t	*im = (immap_t *)CFG_IMMR;
+	volatile immap_t	*im = (immap_t *)CONFIG_SYS_IMMR;
 	volatile cpm8xx_t	*cpmp = &(im->im_cpm);
 
 	up = (scc_uart_t *)&cpmp->cp_dparam[PROFF_SCC];
diff --git a/cpu/mpc8xx/speed.c b/cpu/mpc8xx/speed.c
index 070babcc9..f309f29c0 100644
--- a/cpu/mpc8xx/speed.c
+++ b/cpu/mpc8xx/speed.c
@@ -27,7 +27,7 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
-#if !defined(CONFIG_8xx_CPUCLK_DEFAULT) || defined(CFG_MEASURE_CPUCLK) || defined(DEBUG)
+#if !defined(CONFIG_8xx_CPUCLK_DEFAULT) || defined(CONFIG_SYS_MEASURE_CPUCLK) || defined(DEBUG)
 
 #define PITC_SHIFT 16
 #define PITR_SHIFT 16
@@ -87,12 +87,12 @@ static __inline__ void set_msr(unsigned long msr)
 
 unsigned long measure_gclk(void)
 {
-	volatile immap_t *immr = (immap_t *) CFG_IMMR;
+	volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
 	volatile cpmtimer8xx_t *timerp = &immr->im_cpmtimer;
 	ulong timer2_val;
 	ulong msr_val;
 
-#ifdef CFG_8XX_XIN
+#ifdef CONFIG_SYS_8XX_XIN
 	/* dont use OSCM, only use EXTCLK/512 */
 	immr->im_clkrst.car_sccr |= SCCR_RTSEL | SCCR_RTDIV;
 #else
@@ -137,7 +137,7 @@ unsigned long measure_gclk(void)
 	immr->im_sit.sit_pitc = SPEED_PITC_INIT;
 
 	immr->im_sitk.sitk_piscrk = KAPWR_KEY;
-	immr->im_sit.sit_piscr = CFG_PISCR;
+	immr->im_sit.sit_piscr = CONFIG_SYS_PISCR;
 
 	/*
 	 * Start measurement - disable interrupts, just in case
@@ -164,9 +164,9 @@ unsigned long measure_gclk(void)
 	timerp->cpmt_tgcr &= ~(TGCR_RST2 | TGCR_FRZ2 | TGCR_STP2);
 	immr->im_sit.sit_piscr &= ~PISCR_PTE;
 
-#if defined(CFG_8XX_XIN)
+#if defined(CONFIG_SYS_8XX_XIN)
 	/* not using OSCM, using XIN, so scale appropriately */
-	return (((timer2_val + 2) / 4) * (CFG_8XX_XIN/512))/8192 * 100000L;
+	return (((timer2_val + 2) / 4) * (CONFIG_SYS_8XX_XIN/512))/8192 * 100000L;
 #else
 	return ((timer2_val + 2) / 4) * 100000L;	/* convert to Hz	*/
 #endif
@@ -261,7 +261,7 @@ static long init_pll_866 (long clk);
  */
 int get_clocks_866 (void)
 {
-	volatile immap_t *immr = (immap_t *) CFG_IMMR;
+	volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
 	char		  tmp[64];
 	long		  cpuclk = 0;
 	long		  sccr_reg;
@@ -269,11 +269,11 @@ int get_clocks_866 (void)
 	if (getenv_r ("cpuclk", tmp, sizeof (tmp)) > 0)
 		cpuclk = simple_strtoul (tmp, NULL, 10) * 1000000;
 
-	if ((CFG_8xx_CPUCLK_MIN > cpuclk) || (CFG_8xx_CPUCLK_MAX < cpuclk))
+	if ((CONFIG_SYS_8xx_CPUCLK_MIN > cpuclk) || (CONFIG_SYS_8xx_CPUCLK_MAX < cpuclk))
 		cpuclk = CONFIG_8xx_CPUCLK_DEFAULT;
 
 	gd->cpu_clk = init_pll_866 (cpuclk);
-#if defined(CFG_MEASURE_CPUCLK)
+#if defined(CONFIG_SYS_MEASURE_CPUCLK)
 	gd->cpu_clk = measure_gclk ();
 #endif
 
@@ -301,12 +301,12 @@ int get_clocks_866 (void)
  */
 int sdram_adjust_866 (void)
 {
-	volatile immap_t *immr = (immap_t *) CFG_IMMR;
+	volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
 	long		  mamr;
 
 	mamr = immr->im_memctl.memc_mamr;
 	mamr &= ~MAMR_PTA_MSK;
-	mamr |= ((gd->cpu_clk / CFG_PTA_PER_CLK) << MAMR_PTA_SHIFT);
+	mamr |= ((gd->cpu_clk / CONFIG_SYS_PTA_PER_CLK) << MAMR_PTA_SHIFT);
 	immr->im_memctl.memc_mamr = mamr;
 
 	return (0);
@@ -320,7 +320,7 @@ static long init_pll_866 (long clk)
 {
 	extern void plprcr_write_866 (long);
 
-	volatile immap_t *immr = (immap_t *) CFG_IMMR;
+	volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
 	long		  n, plprcr;
 	char		  mfi, mfn, mfd, s, pdf;
 	long		  step_mfi, step_mfn;
@@ -394,13 +394,13 @@ static long init_pll_866 (long clk)
  */
 int adjust_sdram_tbs_8xx (void)
 {
-	volatile immap_t *immr = (immap_t *) CFG_IMMR;
+	volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
 	long		  mamr;
 	long              sccr;
 
 	mamr = immr->im_memctl.memc_mamr;
 	mamr &= ~MAMR_PTA_MSK;
-	mamr |= ((gd->cpu_clk / CFG_PTA_PER_CLK) << MAMR_PTA_SHIFT);
+	mamr |= ((gd->cpu_clk / CONFIG_SYS_PTA_PER_CLK) << MAMR_PTA_SHIFT);
 	immr->im_memctl.memc_mamr = mamr;
 
 	if (gd->cpu_clk < 67000000) {
diff --git a/cpu/mpc8xx/spi.c b/cpu/mpc8xx/spi.c
index e318ed0d2..b2ac23e5e 100644
--- a/cpu/mpc8xx/spi.c
+++ b/cpu/mpc8xx/spi.c
@@ -41,7 +41,7 @@
 #include <post.h>
 #include <serial.h>
 
-#if (defined(CONFIG_SPI)) || (CONFIG_POST & CFG_POST_SPI)
+#if (defined(CONFIG_SPI)) || (CONFIG_POST & CONFIG_SYS_POST_SPI)
 
 /* Warning:
  * You cannot enable DEBUG for early system initalization, i. e. when
@@ -64,8 +64,8 @@
  * The value 0xb00 makes it far enough from the start of the data
  * area (as well as from the stack pointer).
  * --------------------------------------------------------------- */
-#ifndef	CFG_SPI_INIT_OFFSET
-#define	CFG_SPI_INIT_OFFSET	0xB00
+#ifndef	CONFIG_SYS_SPI_INIT_OFFSET
+#define	CONFIG_SYS_SPI_INIT_OFFSET	0xB00
 #endif
 
 #ifdef	DEBUG
@@ -118,11 +118,11 @@ ssize_t spi_xfer (size_t);
  * Initially we place the RX and TX buffers at a fixed location in DPRAM!
  * ---------------------------------------------------------------------- */
 static uchar *rxbuf =
-  (uchar *)&((cpm8xx_t *)&((immap_t *)CFG_IMMR)->im_cpm)->cp_dpmem
-			[CFG_SPI_INIT_OFFSET];
+  (uchar *)&((cpm8xx_t *)&((immap_t *)CONFIG_SYS_IMMR)->im_cpm)->cp_dpmem
+			[CONFIG_SYS_SPI_INIT_OFFSET];
 static uchar *txbuf =
-  (uchar *)&((cpm8xx_t *)&((immap_t *)CFG_IMMR)->im_cpm)->cp_dpmem
-			[CFG_SPI_INIT_OFFSET+MAX_BUFFER];
+  (uchar *)&((cpm8xx_t *)&((immap_t *)CONFIG_SYS_IMMR)->im_cpm)->cp_dpmem
+			[CONFIG_SYS_SPI_INIT_OFFSET+MAX_BUFFER];
 
 /* **************************************************************************
  *
@@ -144,12 +144,12 @@ void spi_init_f (void)
 	volatile iop8xx_t *iop;
 	volatile cbd_t *tbdf, *rbdf;
 
-	immr = (immap_t *)  CFG_IMMR;
+	immr = (immap_t *)  CONFIG_SYS_IMMR;
 	cpi  = (cpic8xx_t *)&immr->im_cpic;
 	iop  = (iop8xx_t *) &immr->im_ioport;
 	cp   = (cpm8xx_t *) &immr->im_cpm;
 
-#ifdef CFG_SPI_UCODE_PATCH
+#ifdef CONFIG_SYS_SPI_UCODE_PATCH
 	spi  = (spi_t *)&cp->cp_dpmem[spi->spi_rpbase];
 #else
 	spi  = (spi_t *)&cp->cp_dparam[PROFF_SPI];
@@ -210,7 +210,7 @@ void spi_init_f (void)
 	/* Allocate space for one transmit and one receive buffer
 	 * descriptor in the DP ram
 	 */
-#ifdef CFG_ALLOC_DPRAM
+#ifdef CONFIG_SYS_ALLOC_DPRAM
 	dpaddr = dpram_alloc_align (sizeof(cbd_t)*2, 8);
 #else
 	dpaddr = CPM_SPI_BASE;
@@ -234,7 +234,7 @@ void spi_init_f (void)
 	spi->spi_tbptr = spi->spi_tbase;
 
 /* 4 */
-#ifdef CFG_SPI_UCODE_PATCH
+#ifdef CONFIG_SYS_SPI_UCODE_PATCH
 	/*
 	 *  Initialize required parameters if using microcode patch.
 	 */
@@ -247,7 +247,7 @@ void spi_init_f (void)
 	cp->cp_cpcr = mk_cr_cmd(CPM_CR_CH_SPI, CPM_CR_INIT_TRX) | CPM_CR_FLG;
 	while (cp->cp_cpcr & CPM_CR_FLG)
 		;
-#endif	/* CFG_SPI_UCODE_PATCH */
+#endif	/* CONFIG_SYS_SPI_UCODE_PATCH */
 
 /* 5 */
 	/* Set SDMA configuration register */
@@ -299,10 +299,10 @@ void spi_init_r (void)
 	volatile immap_t *immr;
 	volatile cbd_t *tbdf, *rbdf;
 
-	immr = (immap_t *)  CFG_IMMR;
+	immr = (immap_t *)  CONFIG_SYS_IMMR;
 	cp   = (cpm8xx_t *) &immr->im_cpm;
 
-#ifdef CFG_SPI_UCODE_PATCH
+#ifdef CONFIG_SYS_SPI_UCODE_PATCH
 	spi  = (spi_t *)&cp->cp_dpmem[spi->spi_rpbase];
 #else
 	spi  = (spi_t *)&cp->cp_dparam[PROFF_SPI];
@@ -392,10 +392,10 @@ ssize_t spi_xfer (size_t count)
 
 	DPRINT (("*** spi_xfer entered ***\n"));
 
-	immr = (immap_t *) CFG_IMMR;
+	immr = (immap_t *) CONFIG_SYS_IMMR;
 	cp   = (cpm8xx_t *) &immr->im_cpm;
 
-#ifdef CFG_SPI_UCODE_PATCH
+#ifdef CONFIG_SYS_SPI_UCODE_PATCH
 	spi  = (spi_t *)&cp->cp_dpmem[spi->spi_rpbase];
 #else
 	spi  = (spi_t *)&cp->cp_dparam[PROFF_SPI];
@@ -468,7 +468,7 @@ ssize_t spi_xfer (size_t count)
 
 	return count;
 }
-#endif	/* CONFIG_SPI || (CONFIG_POST & CFG_POST_SPI) */
+#endif	/* CONFIG_SPI || (CONFIG_POST & CONFIG_SYS_POST_SPI) */
 
 /*
  * SPI test
@@ -481,7 +481,7 @@ ssize_t spi_xfer (size_t count)
  *   TEST_NUM - number of tests
  */
 
-#if CONFIG_POST & CFG_POST_SPI
+#if CONFIG_POST & CONFIG_SYS_POST_SPI
 
 #define TEST_MIN_LENGTH		1
 #define TEST_MAX_LENGTH		MAX_BUFFER
@@ -513,7 +513,7 @@ static int packet_check (char * packet, int length)
 int spi_post_test (int flags)
 {
 	int res = -1;
-	volatile immap_t *immr = (immap_t *) CFG_IMMR;
+	volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
 	volatile cpm8xx_t *cp = (cpm8xx_t *) & immr->im_cpm;
 	int i;
 	int l;
@@ -557,4 +557,4 @@ int spi_post_test (int flags)
 
 	return res;
 }
-#endif	/* CONFIG_POST & CFG_POST_SPI */
+#endif	/* CONFIG_POST & CONFIG_SYS_POST_SPI */
diff --git a/cpu/mpc8xx/start.S b/cpu/mpc8xx/start.S
index eca4b5062..45c902e7c 100644
--- a/cpu/mpc8xx/start.S
+++ b/cpu/mpc8xx/start.S
@@ -39,6 +39,7 @@
  */
 #include <config.h>
 #include <mpc8xx.h>
+#include <timestamp.h>
 #include <version.h>
 
 #define CONFIG_8xx 1		/* needed for Linux kernel header files */
@@ -87,13 +88,13 @@
 	.globl	version_string
 version_string:
 	.ascii U_BOOT_VERSION
-	.ascii " (", __DATE__, " - ", __TIME__, ")"
+	.ascii " (", U_BOOT_DATE, " - ", U_BOOT_TIME, ")"
 	.ascii CONFIG_IDENT_STRING, "\0"
 
 	. = EXC_OFF_SYS_RESET
 	.globl	_start
 _start:
-	lis	r3, CFG_IMMR@h		/* position IMMR */
+	lis	r3, CONFIG_SYS_IMMR@h		/* position IMMR */
 	mtspr	638, r3
 	li	r21, BOOTFLAG_COLD	/* Normal Power-On: Boot from FLASH	*/
 	b	boot_cold
@@ -159,8 +160,8 @@ boot_warm:
 	 * Calculate absolute address in FLASH and jump there
 	 *----------------------------------------------------------------------*/
 
-	lis	r3, CFG_MONITOR_BASE@h
-	ori	r3, r3, CFG_MONITOR_BASE@l
+	lis	r3, CONFIG_SYS_MONITOR_BASE@h
+	ori	r3, r3, CONFIG_SYS_MONITOR_BASE@l
 	addi	r3, r3, in_flash - _start + EXC_OFF_SYS_RESET
 	mtlr	r3
 	blr
@@ -170,8 +171,8 @@ in_flash:
 	/* initialize some SPRs that are hard to access from C			*/
 	/*----------------------------------------------------------------------*/
 
-	lis	r3, CFG_IMMR@h		/* pass IMMR as arg1 to C routine */
-	ori	r1, r3, CFG_INIT_SP_OFFSET /* set up the stack in internal DPRAM */
+	lis	r3, CONFIG_SYS_IMMR@h		/* pass IMMR as arg1 to C routine */
+	ori	r1, r3, CONFIG_SYS_INIT_SP_OFFSET /* set up the stack in internal DPRAM */
 	/* Note: R0 is still 0 here */
 	stwu	r0, -4(r1)		/* clear final stack frame so that	*/
 	stwu	r0, -4(r1)		/* stack backtraces terminate cleanly	*/
@@ -187,8 +188,8 @@ in_flash:
 
 	/* Set up debug mode entry */
 
-	lis	r2, CFG_DER@h
-	ori	r2, r2, CFG_DER@l
+	lis	r2, CONFIG_SYS_DER@h
+	ori	r2, r2, CONFIG_SYS_DER@l
 	mtspr	DER, r2
 
 	/* let the C-code set up the rest					*/
@@ -495,16 +496,16 @@ relocate_code:
 	mr	r10, r5		/* Save copy of Destination Address	*/
 
 	mr	r3,  r5				/* Destination Address	*/
-	lis	r4, CFG_MONITOR_BASE@h		/* Source      Address	*/
-	ori	r4, r4, CFG_MONITOR_BASE@l
+	lis	r4, CONFIG_SYS_MONITOR_BASE@h		/* Source      Address	*/
+	ori	r4, r4, CONFIG_SYS_MONITOR_BASE@l
 	lwz	r5, GOT(__init_end)
 	sub	r5, r5, r4
-	li	r6, CFG_CACHELINE_SIZE		/* Cache Line Size	*/
+	li	r6, CONFIG_SYS_CACHELINE_SIZE		/* Cache Line Size	*/
 
 	/*
 	 * Fix GOT pointer:
 	 *
-	 * New GOT-PTR = (old GOT-PTR - CFG_MONITOR_BASE) + Destination Address
+	 * New GOT-PTR = (old GOT-PTR - CONFIG_SYS_MONITOR_BASE) + Destination Address
 	 *
 	 * Offset:
 	 */
diff --git a/cpu/mpc8xx/upatch.c b/cpu/mpc8xx/upatch.c
index 4d6c52246..a8cb735ab 100644
--- a/cpu/mpc8xx/upatch.c
+++ b/cpu/mpc8xx/upatch.c
@@ -1,8 +1,8 @@
 #include <common.h>
 #include <commproc.h>
 
-#if defined(CFG_I2C_UCODE_PATCH) || defined(CFG_SPI_UCODE_PATCH) || \
-    defined(CFG_SMC_UCODE_PATCH)
+#if defined(CONFIG_SYS_I2C_UCODE_PATCH) || defined(CONFIG_SYS_SPI_UCODE_PATCH) || \
+    defined(CONFIG_SYS_SMC_UCODE_PATCH)
 
 static void UcodeCopy (volatile cpm8xx_t *cpm);
 
@@ -11,36 +11,36 @@ void cpm_load_patch (volatile immap_t *immr)
 	immr->im_cpm.cp_rccr &= ~0x0003;	/* Disable microcode program area */
 
 	UcodeCopy ((cpm8xx_t *)&immr->im_cpm);	/* Copy ucode patch to DPRAM   */
-#ifdef CFG_SPI_UCODE_PATCH
+#ifdef CONFIG_SYS_SPI_UCODE_PATCH
     {
 	volatile spi_t *spi = (spi_t *) & immr->im_cpm.cp_dparam[PROFF_SPI];
 	/* Activate the microcode per the instructions in the microcode manual */
 	/* NOTE:  We're only relocating the SPI parameters (not I2C).          */
 	immr->im_cpm.cp_cpmcr1 = 0x802a;	/* Write Trap register 1 value */
 	immr->im_cpm.cp_cpmcr2 = 0x8028;	/* Write Trap register 2 value */
-	spi->spi_rpbase = CFG_SPI_DPMEM_OFFSET;	/* Where to relocte SPI params */
+	spi->spi_rpbase = CONFIG_SYS_SPI_DPMEM_OFFSET;	/* Where to relocte SPI params */
     }
 #endif
 
-#ifdef CFG_I2C_UCODE_PATCH
+#ifdef CONFIG_SYS_I2C_UCODE_PATCH
     {
 	volatile iic_t *iip = (iic_t *) & immr->im_cpm.cp_dparam[PROFF_IIC];
 	/* Activate the microcode per the instructions in the microcode manual */
 	/* NOTE:  We're only relocating the I2C parameters (not SPI).          */
 	immr->im_cpm.cp_cpmcr3 = 0x802e;	/* Write Trap register 3 value */
 	immr->im_cpm.cp_cpmcr4 = 0x802c;	/* Write Trap register 4 value */
-	iip->iic_rpbase = CFG_I2C_DPMEM_OFFSET;	/* Where to relocte I2C params */
+	iip->iic_rpbase = CONFIG_SYS_I2C_DPMEM_OFFSET;	/* Where to relocte I2C params */
     }
 #endif
 
-#ifdef CFG_SMC_UCODE_PATCH
+#ifdef CONFIG_SYS_SMC_UCODE_PATCH
     {
 	volatile smc_uart_t *up = (smc_uart_t *) & immr->im_cpm.cp_dparam[PROFF_SMC1];
 	/* Activate the microcode per the instructions in the microcode manual */
 	/* NOTE:  We're only relocating the SMC parameters.                    */
 	immr->im_cpm.cp_cpmcr1 = 0x8080;	/* Write Trap register 1 value */
 	immr->im_cpm.cp_cpmcr2 = 0x8088;	/* Write Trap register 2 value */
-	up->smc_rpbase = CFG_SMC_DPMEM_OFFSET;	/* Where to relocte SMC params */
+	up->smc_rpbase = CONFIG_SYS_SMC_DPMEM_OFFSET;	/* Where to relocte SMC params */
     }
 #endif
 
@@ -48,14 +48,14 @@ void cpm_load_patch (volatile immap_t *immr)
 	 * Enable DPRAM microcode to execute from the first 512 bytes
 	 * and a 256 byte extension of DPRAM.
 	 */
-#ifdef CFG_SMC_UCODE_PATCH
+#ifdef CONFIG_SYS_SMC_UCODE_PATCH
 	immr->im_cpm.cp_rccr |= 0x0002;
 #else
 	immr->im_cpm.cp_rccr |= 0x0001;
 #endif
 }
 
-#if defined(CFG_I2C_UCODE_PATCH) || defined(CFG_SPI_UCODE_PATCh)
+#if defined(CONFIG_SYS_I2C_UCODE_PATCH) || defined(CONFIG_SYS_SPI_UCODE_PATCh)
 static ulong patch_2000[] = {
 	0x7FFFEFD9, 0x3FFD0000, 0x7FFB49F7, 0x7FF90000,
 	0x5FEFADF7, 0x5F88ADF7, 0x5FEFAFF7, 0x5F88AFF7,
@@ -191,4 +191,4 @@ static void UcodeCopy (volatile cpm8xx_t *cpm)
 	}
 }
 
-#endif	/* CFG_I2C_UCODE_PATCH, CFG_SPI_UCODE_PATCH */
+#endif	/* CONFIG_SYS_I2C_UCODE_PATCH, CONFIG_SYS_SPI_UCODE_PATCH */
diff --git a/cpu/mpc8xx/video.c b/cpu/mpc8xx/video.c
index ef9116560..4a5992743 100644
--- a/cpu/mpc8xx/video.c
+++ b/cpu/mpc8xx/video.c
@@ -33,6 +33,7 @@
 #include <common.h>
 #include <config.h>
 #include <version.h>
+#include <timestamp.h>
 #include <i2c.h>
 #include <linux/types.h>
 #include <devices.h>
@@ -517,7 +518,7 @@ static void inline video_mode_addentry (VRAM * vr,
 
 static int video_mode_generate (void)
 {
-	immap_t *immap = (immap_t *) CFG_IMMR;
+	immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
 	VRAM *vr = (VRAM *) (((void *) immap) + 0xb00);	/* Pointer to the VRAM table */
 	int DX, X1, X2, DY, Y1, Y2, entry = 0, fifo;
 
@@ -808,7 +809,7 @@ static void video_encoder_init (void)
 
 	/* Initialize the I2C */
 	debug ("[VIDEO ENCODER] Initializing I2C bus...\n");
-	i2c_init (CFG_I2C_SPEED, CFG_I2C_SLAVE);
+	i2c_init (CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
 
 #ifdef CONFIG_FADS
 	/* Reset ADV7176 chip */
@@ -856,7 +857,7 @@ static void video_encoder_init (void)
 
 static void video_ctrl_init (void *memptr)
 {
-	immap_t *immap = (immap_t *) CFG_IMMR;
+	immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
 
 	video_fb_address = memptr;
 
@@ -1174,7 +1175,8 @@ static void *video_logo (void)
 	easylogo_plot (VIDEO_LOGO_ADDR, screen, width, 0, 0);
 
 #ifdef VIDEO_INFO
-	sprintf (info, "%s (%s - %s) ", U_BOOT_VERSION, __DATE__, __TIME__);
+	sprintf (info, "%s (%s - %s) ",
+		 U_BOOT_VERSION, U_BOOT_DATE, U_BOOT_TIME);
 	video_drawstring (VIDEO_INFO_X, VIDEO_INFO_Y, info);
 
 	sprintf (info, "(C) 2002 DENX Software Engineering");
@@ -1235,13 +1237,13 @@ static int video_init (void *videobase)
 	video_setpalette  (CONSOLE_COLOR_GREY2,	  0xF8, 0xF8, 0xF8);
 	video_setpalette  (CONSOLE_COLOR_WHITE,	  0xFF, 0xFF, 0xFF);
 
-#ifndef CFG_WHITE_ON_BLACK
+#ifndef CONFIG_SYS_WHITE_ON_BLACK
 	video_setfgcolor (CONSOLE_COLOR_BLACK);
 	video_setbgcolor (CONSOLE_COLOR_GREY2);
 #else
 	video_setfgcolor (CONSOLE_COLOR_GREY2);
 	video_setbgcolor (CONSOLE_COLOR_BLACK);
-#endif	/* CFG_WHITE_ON_BLACK */
+#endif	/* CONFIG_SYS_WHITE_ON_BLACK */
 
 #ifdef CONFIG_VIDEO_LOGO
 	/* Paint the logo and retrieve tv base address */
diff --git a/cpu/mpc8xxx/ddr/ctrl_regs.c b/cpu/mpc8xxx/ddr/ctrl_regs.c
index ca675512a..1783e927a 100644
--- a/cpu/mpc8xxx/ddr/ctrl_regs.c
+++ b/cpu/mpc8xxx/ddr/ctrl_regs.c
@@ -95,16 +95,10 @@ static void set_csn_config(int i, fsl_ddr_cfg_regs_t *ddr,
 		col_bits_cs_n = dimm_params[i/2].n_col_addr - 8;
 	}
 
-	/* FIXME: intlv_en, intlv_ctl only on CS0_CONFIG */
-	if (i != 0) {
-		intlv_en = 0;
-		intlv_ctl = 0;
-	}
-
 	ddr->cs[i].config = (0
 		| ((cs_n_en & 0x1) << 31)
 		| ((intlv_en & 0x3) << 29)
-		| ((intlv_en & 0xf) << 24)
+		| ((intlv_ctl & 0xf) << 24)
 		| ((ap_n_en & 0x1) << 23)
 
 		/* XXX: some implementation only have 1 bit starting at left */
@@ -117,6 +111,7 @@ static void set_csn_config(int i, fsl_ddr_cfg_regs_t *ddr,
 		| ((row_bits_cs_n & 0x7) << 8)
 		| ((col_bits_cs_n & 0x7) << 0)
 		);
+	debug("FSLDDR: cs[%d]_config = 0x%08x\n", i,ddr->cs[i].config);
 }
 
 /* Chip Select Configuration 2 (CSn_CONFIG_2) */
@@ -126,6 +121,7 @@ static void set_csn_config_2(int i, fsl_ddr_cfg_regs_t *ddr)
 	unsigned int pasr_cfg = 0;	/* Partial array self refresh config */
 
 	ddr->cs[i].config_2 = ((pasr_cfg & 7) << 24);
+	debug("FSLDDR: cs[%d]_config_2 = 0x%08x\n", i, ddr->cs[i].config_2);
 }
 
 /* -3E = 667 CL5, -25 = CL6 800, -25E = CL5 800 */
@@ -196,6 +192,7 @@ static void set_timing_cfg_3(fsl_ddr_cfg_regs_t *ddr,
 		| ((ext_caslat & 0x1) << 12)
 		| ((cntl_adj & 0x7) << 0)
 		);
+	debug("FSLDDR: timing_cfg_3 = 0x%08x\n", ddr->timing_cfg_3);
 }
 
 /* DDR SDRAM Timing Configuration 1 (TIMING_CFG_1) */
@@ -263,6 +260,7 @@ static void set_timing_cfg_1(fsl_ddr_cfg_regs_t *ddr,
 		| ((acttoact_mclk & 0x07) << 4)
 		| ((wrtord_mclk & 0x07) << 0)
 		);
+	debug("FSLDDR: timing_cfg_1 = 0x%08x\n", ddr->timing_cfg_1);
 }
 
 /* DDR SDRAM Timing Configuration 2 (TIMING_CFG_2) */
@@ -319,6 +317,7 @@ static void set_timing_cfg_2(fsl_ddr_cfg_regs_t *ddr,
 		| ((cke_pls & 0x7) << 6)
 		| ((four_act & 0x1f) << 0)
 		);
+	debug("FSLDDR: timing_cfg_2 = 0x%08x\n", ddr->timing_cfg_2);
 }
 
 /* DDR SDRAM control configuration (DDR_SDRAM_CFG) */
@@ -385,6 +384,7 @@ static void set_ddr_sdram_cfg(fsl_ddr_cfg_regs_t *ddr,
 			| ((mem_halt & 0x1) << 1)
 			| ((bi & 0x1) << 0)
 			);
+	debug("FSLDDR: ddr_sdram_cfg = 0x%08x\n", ddr->ddr_sdram_cfg);
 }
 
 /* DDR SDRAM control configuration 2 (DDR_SDRAM_CFG_2) */
@@ -449,6 +449,7 @@ static void set_ddr_sdram_cfg_2(fsl_ddr_cfg_regs_t *ddr,
 		| ((rcw_en & 0x1) << 2)
 		| ((md_en & 0x1) << 0)
 		);
+	debug("FSLDDR: ddr_sdram_cfg_2 = 0x%08x\n", ddr->ddr_sdram_cfg_2);
 }
 
 /* DDR SDRAM Mode configuration 2 (DDR_SDRAM_MODE_2) */
@@ -461,6 +462,7 @@ static void set_ddr_sdram_mode_2(fsl_ddr_cfg_regs_t *ddr)
 				 | ((esdmode2 & 0xFFFF) << 16)
 				 | ((esdmode3 & 0xFFFF) << 0)
 				 );
+	debug("FSLDDR: ddr_sdram_mode_2 = 0x%08x\n", ddr->ddr_sdram_mode_2);
 }
 
 /* DDR SDRAM Interval Configuration (DDR_SDRAM_INTERVAL) */
@@ -480,6 +482,7 @@ static void set_ddr_sdram_interval(fsl_ddr_cfg_regs_t *ddr,
 				   | ((refint & 0xFFFF) << 16)
 				   | ((bstopre & 0x3FFF) << 0)
 				   );
+	debug("FSLDDR: ddr_sdram_interval = 0x%08x\n", ddr->ddr_sdram_interval);
 }
 
 /* DDR SDRAM Mode configuration set (DDR_SDRAM_MODE) */
@@ -520,7 +523,7 @@ static void set_ddr_sdram_mode(fsl_ddr_cfg_regs_t *ddr,
 	unsigned int wr;	/* Write Recovery */
 	unsigned int dll_res;	/* DLL Reset */
 	unsigned int mode;	/* Normal=0 or Test=1 */
-	unsigned int caslat;	/* CAS# latency */
+	unsigned int caslat = 0;/* CAS# latency */
 	/* BT: Burst Type (0=Sequential, 1=Interleaved) */
 	unsigned int bt;
 	unsigned int bl;	/* BL: Burst Length */
@@ -572,7 +575,9 @@ static void set_ddr_sdram_mode(fsl_ddr_cfg_regs_t *ddr,
 			0x6,	/* 2.5 clocks */
 			0x3	/* 3.0 clocks */
 		};
-	caslat = mode_caslat_table[cas_latency - 1];
+		caslat = mode_caslat_table[cas_latency - 1];
+	} else {
+		printf("Warning: unknown cas_latency %d\n", cas_latency);
 	}
 #elif defined(CONFIG_FSL_DDR2)
 	caslat = cas_latency;
@@ -611,6 +616,7 @@ static void set_ddr_sdram_mode(fsl_ddr_cfg_regs_t *ddr,
 			       | ((esdmode & 0xFFFF) << 16)
 			       | ((sdmode & 0xFFFF) << 0)
 			       );
+	debug("FSLDDR: ddr_sdram_mode = 0x%08x\n", ddr->ddr_sdram_mode);
 }
 
 
@@ -673,6 +679,7 @@ static void set_timing_cfg_4(fsl_ddr_cfg_regs_t *ddr)
 			     | ((wwt & 0xf) << 16)
 			     | (dll_lock & 0x3)
 			     );
+	debug("FSLDDR: timing_cfg_4 = 0x%08x\n", ddr->timing_cfg_4);
 }
 
 /* DDR SDRAM Timing Configuration 5 (TIMING_CFG_5) */
@@ -689,6 +696,7 @@ static void set_timing_cfg_5(fsl_ddr_cfg_regs_t *ddr)
 			     | ((wodt_on & 0xf) << 12)
 			     | ((wodt_off & 0xf) << 8)
 			     );
+	debug("FSLDDR: timing_cfg_5 = 0x%08x\n", ddr->timing_cfg_5);
 }
 
 /* DDR ZQ Calibration Control (DDR_ZQ_CNTL) */
@@ -872,8 +880,13 @@ compute_fsl_memctl_config_regs(const memctl_options_t *popts,
 	for (i = 0; i < CONFIG_CHIP_SELECTS_PER_CTRL; i++) {
 		phys_size_t sa = 0;
 		phys_size_t ea = 0;
-		if (popts->ba_intlv_ctl && i > 0) {
-			/* Don't set up boundaries if bank interleaving */
+
+		if (popts->ba_intlv_ctl && (i > 0) &&
+			((popts->ba_intlv_ctl & 0x60) != FSL_DDR_CS2_CS3 )) {
+			/* Don't set up boundaries for other CS
+			 * other than CS0, if bank interleaving
+			 * is enabled and not CS2+CS3 interleaved.
+			 */
 			break;
 		}
 
@@ -892,7 +905,9 @@ compute_fsl_memctl_config_regs(const memctl_options_t *popts,
 			 * on each controller is twice the amount present on
 			 * each controller.
 			 */
-			ea = (2 * common_dimm->total_mem >> dbw_cap_adj) - 1;
+			unsigned long long rank_density
+					= dimm_params[0].capacity;
+			ea = (2 * (rank_density >> dbw_cap_adj)) - 1;
 		}
 		else if (!popts->memctl_interleaving && popts->ba_intlv_ctl) {
 			/*
@@ -904,8 +919,44 @@ compute_fsl_memctl_config_regs(const memctl_options_t *popts,
 			 * controller needs to be programmed into its
 			 * respective CS0_BNDS.
 			 */
-			sa = common_dimm->base_address;
-			ea = sa + (common_dimm->total_mem >> dbw_cap_adj) - 1;
+			unsigned long long rank_density
+						= dimm_params[i/2].rank_density;
+			switch (popts->ba_intlv_ctl & FSL_DDR_CS0_CS1_CS2_CS3) {
+			case FSL_DDR_CS0_CS1_CS2_CS3:
+				/* CS0+CS1+CS2+CS3 interleaving, only CS0_CNDS
+				 * needs to be set.
+				 */
+				sa = common_dimm->base_address;
+				ea = sa + (4 * (rank_density >> dbw_cap_adj))-1;
+				break;
+			case FSL_DDR_CS0_CS1_AND_CS2_CS3:
+				/* CS0+CS1 and CS2+CS3 interleaving, CS0_CNDS
+				 * and CS2_CNDS need to be set.
+				 */
+				if (!(i&1)) {
+					sa = dimm_params[i/2].base_address;
+					ea = sa + (i * (rank_density >>
+						dbw_cap_adj)) - 1;
+				}
+				break;
+			case FSL_DDR_CS0_CS1:
+				/* CS0+CS1 interleaving, CS0_CNDS needs
+				 * to be set
+				 */
+				sa = common_dimm->base_address;
+				ea = sa + (2 * (rank_density >> dbw_cap_adj))-1;
+				break;
+			case FSL_DDR_CS2_CS3:
+				/* CS2+CS3 interleaving*/
+				if (i == 2) {
+					sa = dimm_params[i/2].base_address;
+					ea = sa + (2 * (rank_density >>
+						dbw_cap_adj)) - 1;
+				}
+				break;
+			default:  /* No bank(chip-select) interleaving */
+				break;
+			}
 		}
 		else if (popts->memctl_interleaving && !popts->ba_intlv_ctl) {
 			/*
@@ -953,6 +1004,7 @@ compute_fsl_memctl_config_regs(const memctl_options_t *popts,
 			| ((ea & 0xFFF) << 0)	/* ending address MSB */
 			);
 
+		debug("FSLDDR: cs[%d]_bnds = 0x%08x\n", i, ddr->cs[i].bnds);
 		set_csn_config(i, ddr, popts, dimm_params);
 		set_csn_config_2(i, ddr);
 	}
diff --git a/cpu/mpc8xxx/ddr/ddr.h b/cpu/mpc8xxx/ddr/ddr.h
index f5dc40a53..9ffd5485c 100644
--- a/cpu/mpc8xxx/ddr/ddr.h
+++ b/cpu/mpc8xxx/ddr/ddr.h
@@ -10,8 +10,8 @@
 #define FSL_DDR_MAIN_H
 
 #include <asm/fsl_ddr_sdram.h>
+#include <asm/fsl_ddr_dimm_params.h>
 
-#include "ddr1_2_dimm_params.h"
 #include "common_timing_params.h"
 
 /*
@@ -31,17 +31,17 @@ compute_dimm_parameters(const generic_spd_eeprom_t *spd,
  *
  * All data structures have to be on the stack
  */
-#define CFG_NUM_DDR_CTLRS CONFIG_NUM_DDR_CONTROLLERS
-#define CFG_DIMM_SLOTS_PER_CTLR CONFIG_DIMM_SLOTS_PER_CTLR
+#define CONFIG_SYS_NUM_DDR_CTLRS CONFIG_NUM_DDR_CONTROLLERS
+#define CONFIG_SYS_DIMM_SLOTS_PER_CTLR CONFIG_DIMM_SLOTS_PER_CTLR
 
 typedef struct {
 	generic_spd_eeprom_t
-	   spd_installed_dimms[CFG_NUM_DDR_CTLRS][CFG_DIMM_SLOTS_PER_CTLR];
+	   spd_installed_dimms[CONFIG_SYS_NUM_DDR_CTLRS][CONFIG_SYS_DIMM_SLOTS_PER_CTLR];
 	struct dimm_params_s
-	   dimm_params[CFG_NUM_DDR_CTLRS][CFG_DIMM_SLOTS_PER_CTLR];
-	memctl_options_t memctl_opts[CFG_NUM_DDR_CTLRS];
-	common_timing_params_t common_timing_params[CFG_NUM_DDR_CTLRS];
-	fsl_ddr_cfg_regs_t fsl_ddr_config_reg[CFG_NUM_DDR_CTLRS];
+	   dimm_params[CONFIG_SYS_NUM_DDR_CTLRS][CONFIG_SYS_DIMM_SLOTS_PER_CTLR];
+	memctl_options_t memctl_opts[CONFIG_SYS_NUM_DDR_CTLRS];
+	common_timing_params_t common_timing_params[CONFIG_SYS_NUM_DDR_CTLRS];
+	fsl_ddr_cfg_regs_t fsl_ddr_config_reg[CONFIG_SYS_NUM_DDR_CTLRS];
 } fsl_ddr_info_t;
 
 /* Compute steps */
@@ -71,6 +71,7 @@ compute_lowest_common_dimm_parameters(const dimm_params_t *dimm_params,
 				      unsigned int number_of_dimms);
 extern unsigned int populate_memctl_options(int all_DIMMs_registered,
 				memctl_options_t *popts,
+				dimm_params_t *pdimm,
 				unsigned int ctrl_num);
 
 extern unsigned int mclk_to_picos(unsigned int mclk);
diff --git a/cpu/mpc8xxx/ddr/main.c b/cpu/mpc8xxx/ddr/main.c
index ac4b80c3a..f1ad13286 100644
--- a/cpu/mpc8xxx/ddr/main.c
+++ b/cpu/mpc8xxx/ddr/main.c
@@ -44,10 +44,10 @@ extern void fsl_ddr_get_spd(generic_spd_eeprom_t *ctrl_dimms_spd,
  *
  * memory controller/documention  |industry   |this code  |signals
  * -------------------------------|-----------|-----------|-----------------
- * physical bank/bank             |rank       |rank       |chip select (CS)
- * logical bank/sub-bank          |bank       |bank       |bank address (BA)
- * page/row                       |row        |page       |row address
- * ???                            |column     |column     |column address
+ * physical bank/bank		  |rank       |rank	  |chip select (CS)
+ * logical bank/sub-bank	  |bank       |bank	  |bank address (BA)
+ * page/row			  |row	      |page	  |row address
+ * ???				  |column     |column	  |column address
  *
  * The naming confusion is further exacerbated by the descriptions of the
  * memory controller interleaving feature, where accesses are interleaved
@@ -55,24 +55,24 @@ extern void fsl_ddr_get_spd(generic_spd_eeprom_t *ctrl_dimms_spd,
  * CS0_CONFIG[INTLV_CTL] of each memory controller.
  *
  * memory controller documentation | number of chip selects
- *                                 | per memory controller supported
+ *				   | per memory controller supported
  * --------------------------------|-----------------------------------------
- * cache line interleaving         | 1 (CS0 only)
- * page interleaving               | 1 (CS0 only)
- * bank interleaving               | 1 (CS0 only)
- * superbank interleraving         | depends on bank (chip select)
- *                                 |   interleraving [rank interleaving]
- *                                 |   mode used on every memory controller
+ * cache line interleaving	   | 1 (CS0 only)
+ * page interleaving		   | 1 (CS0 only)
+ * bank interleaving		   | 1 (CS0 only)
+ * superbank interleraving	   | depends on bank (chip select)
+ *				   |   interleraving [rank interleaving]
+ *				   |   mode used on every memory controller
  *
  * Even further confusing is the existence of the interleaving feature
  * _WITHIN_ each memory controller.  The feature is referred to in
  * documentation as chip select interleaving or bank interleaving,
  * although it is configured in the DDR_SDRAM_CFG field.
  *
- * Name of field                | documentation name    | this code
+ * Name of field		| documentation name	| this code
  * -----------------------------|-----------------------|------------------
- * DDR_SDRAM_CFG[BA_INTLV_CTL]  | Bank (chip select)    | rank interleaving
- *                              |  interleaving
+ * DDR_SDRAM_CFG[BA_INTLV_CTL]	| Bank (chip select)	| rank interleaving
+ *				|  interleaving
  */
 
 #ifdef DEBUG
@@ -164,6 +164,24 @@ int step_assign_addresses(fsl_ddr_info_t *pinfo,
 	}
 	if (j == 2) {
 		*memctl_interleaving = 1;
+
+		printf("\nMemory controller interleaving enabled: ");
+
+		switch (pinfo->memctl_opts[0].memctl_interleaving_mode) {
+		case FSL_DDR_CACHE_LINE_INTERLEAVING:
+			printf("Cache-line interleaving!\n");
+			break;
+		case FSL_DDR_PAGE_INTERLEAVING:
+			printf("Page interleaving!\n");
+			break;
+		case FSL_DDR_BANK_INTERLEAVING:
+			printf("Bank interleaving!\n");
+			break;
+		case FSL_DDR_SUPERBANK_INTERLEAVING:
+			printf("Super bank interleaving\n");
+		default:
+			break;
+		}
 	}
 
 	/* Check that all controllers are rank interleaving. */
@@ -175,10 +193,30 @@ int step_assign_addresses(fsl_ddr_info_t *pinfo,
 	}
 	if (j == 2) {
 		*rank_interleaving = 1;
+
+		printf("Bank(chip-select) interleaving enabled: ");
+
+		switch (pinfo->memctl_opts[0].ba_intlv_ctl &
+						FSL_DDR_CS0_CS1_CS2_CS3) {
+		case FSL_DDR_CS0_CS1_CS2_CS3:
+			printf("CS0+CS1+CS2+CS3\n");
+			break;
+		case FSL_DDR_CS0_CS1:
+			printf("CS0+CS1\n");
+			break;
+		case FSL_DDR_CS2_CS3:
+			printf("CS2+CS3\n");
+			break;
+		case FSL_DDR_CS0_CS1_AND_CS2_CS3:
+			printf("CS0+CS1 and CS2+CS3\n");
+		default:
+			break;
+		}
 	}
 
 	if (*memctl_interleaving) {
 		phys_addr_t addr;
+		phys_size_t total_mem_per_ctlr = 0;
 
 		/*
 		 * If interleaving between memory controllers,
@@ -197,14 +235,18 @@ int step_assign_addresses(fsl_ddr_info_t *pinfo,
 
 		for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) {
 			addr = 0;
+			pinfo->common_timing_params[i].base_address =
+						(phys_addr_t)addr;
 			for (j = 0; j < CONFIG_DIMM_SLOTS_PER_CTLR; j++) {
 				unsigned long long cap
 					= pinfo->dimm_params[i][j].capacity;
 
 				pinfo->dimm_params[i][j].base_address = addr;
 				addr += (phys_addr_t)(cap >> dbw_cap_adj[i]);
+				total_mem_per_ctlr += cap >> dbw_cap_adj[i];
 			}
 		}
+		pinfo->common_timing_params[0].total_mem = total_mem_per_ctlr;
 	} else {
 		/*
 		 * Simple linear assignment if memory
@@ -270,7 +312,7 @@ fsl_ddr_compute(fsl_ddr_info_t *pinfo, unsigned int start_step)
 				generic_spd_eeprom_t *spd =
 					&(pinfo->spd_installed_dimms[i][j]);
 				dimm_params_t *pdimm =
-                                        &(pinfo->dimm_params[i][j]);
+					&(pinfo->dimm_params[i][j]);
 
 				retval = compute_dimm_parameters(spd, pdimm, i);
 				if (retval == 2) {
@@ -314,7 +356,8 @@ fsl_ddr_compute(fsl_ddr_info_t *pinfo, unsigned int start_step)
 			 */
 			populate_memctl_options(
 					timing_params[i].all_DIMMs_registered,
-					&pinfo->memctl_opts[i], i);
+					&pinfo->memctl_opts[i],
+					pinfo->dimm_params[i], i);
 		}
 
 	case STEP_ASSIGN_ADDRESSES:
@@ -432,9 +475,14 @@ phys_size_t fsl_ddr_sdram(void)
 			 */
 			memctl_interleaved = 1;
 		} else {
-			printf("Error: memctl interleaving not "
+			printf("Warning: memctl interleaving not "
 				"properly configured on all controllers\n");
-			while (1);
+			memctl_interleaved = 0;
+			for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++)
+				info.memctl_opts[i].memctl_interleaving = 0;
+			debug("Recomputing with memctl_interleaving off.\n");
+			total_memory = fsl_ddr_compute(&info,
+						       STEP_ASSIGN_ADDRESSES);
 		}
 	}
 
diff --git a/cpu/mpc8xxx/ddr/options.c b/cpu/mpc8xxx/ddr/options.c
index 6c2b43c0c..af7f73a83 100644
--- a/cpu/mpc8xxx/ddr/options.c
+++ b/cpu/mpc8xxx/ddr/options.c
@@ -13,13 +13,16 @@
 
 /* Board-specific functions defined in each board's ddr.c */
 extern void fsl_ddr_board_options(memctl_options_t *popts,
+		dimm_params_t *pdimm,
 		unsigned int ctrl_num);
 
 unsigned int populate_memctl_options(int all_DIMMs_registered,
 			memctl_options_t *popts,
+			dimm_params_t *pdimm,
 			unsigned int ctrl_num)
 {
 	unsigned int i;
+	const char *p;
 
 	/* Chip select options. */
 
@@ -179,19 +182,88 @@ unsigned int populate_memctl_options(int all_DIMMs_registered,
 #error "FIXME determine four activates for DDR3"
 #endif
 
-	/* ODT should only be used for DDR2 */
-
-	/* FIXME? */
-
 	/*
-	 * Interleaving checks.
+	 * Check interleaving configuration from environment.
+	 * Please refer to doc/README.fsl-ddr for the detail.
 	 *
 	 * If memory controller interleaving is enabled, then the data
 	 * bus widths must be programmed identically for the 2 memory
 	 * controllers.
+	 *
+	 * XXX: Attempt to set both controllers to the same chip select
+	 * interleaving mode. It will do a best effort to get the
+	 * requested ranks interleaved together such that the result
+	 * should be a subset of the requested configuration.
 	 */
+	if ((p = getenv("memctl_intlv_ctl")) != NULL) {
+		if (pdimm[0].n_ranks == 0) {
+			printf("There is no rank on CS0. Because only rank on "
+				"CS0 and ranks chip-select interleaved with CS0"
+				" are controller interleaved, force non memory "
+				"controller interleaving\n");
+			popts->memctl_interleaving = 0;
+		} else {
+			popts->memctl_interleaving = 1;
+			if (strcmp(p, "cacheline") == 0)
+				popts->memctl_interleaving_mode =
+					FSL_DDR_CACHE_LINE_INTERLEAVING;
+			else if (strcmp(p, "page") == 0)
+				popts->memctl_interleaving_mode =
+					FSL_DDR_PAGE_INTERLEAVING;
+			else if (strcmp(p, "bank") == 0)
+				popts->memctl_interleaving_mode =
+					FSL_DDR_BANK_INTERLEAVING;
+			else if (strcmp(p, "superbank") == 0)
+				popts->memctl_interleaving_mode =
+					FSL_DDR_SUPERBANK_INTERLEAVING;
+			else
+				popts->memctl_interleaving_mode =
+						simple_strtoul(p, NULL, 0);
+		}
+	}
+
+	if( (p = getenv("ba_intlv_ctl")) != NULL) {
+		if (strcmp(p, "cs0_cs1") == 0)
+			popts->ba_intlv_ctl = FSL_DDR_CS0_CS1;
+		else if (strcmp(p, "cs2_cs3") == 0)
+			popts->ba_intlv_ctl = FSL_DDR_CS2_CS3;
+		else if (strcmp(p, "cs0_cs1_and_cs2_cs3") == 0)
+			popts->ba_intlv_ctl = FSL_DDR_CS0_CS1_AND_CS2_CS3;
+		else if (strcmp(p, "cs0_cs1_cs2_cs3") == 0)
+			popts->ba_intlv_ctl = FSL_DDR_CS0_CS1_CS2_CS3;
+		else
+			popts->ba_intlv_ctl = simple_strtoul(p, NULL, 0);
+
+		switch (popts->ba_intlv_ctl & FSL_DDR_CS0_CS1_CS2_CS3) {
+		case FSL_DDR_CS0_CS1_CS2_CS3:
+		case FSL_DDR_CS0_CS1:
+			if (pdimm[0].n_ranks != 2) {
+				popts->ba_intlv_ctl = 0;
+				printf("Not enough bank(chip-select) for "
+					"CS0+CS1, force non-interleaving!\n");
+			}
+			break;
+		case FSL_DDR_CS2_CS3:
+			if (pdimm[1].n_ranks !=2){
+				popts->ba_intlv_ctl = 0;
+				printf("Not enough bank(CS) for CS2+CS3, "
+					"force non-interleaving!\n");
+			}
+			break;
+		case FSL_DDR_CS0_CS1_AND_CS2_CS3:
+			if ((pdimm[0].n_ranks != 2)||(pdimm[1].n_ranks != 2)) {
+				popts->ba_intlv_ctl = 0;
+				printf("Not enough bank(CS) for CS0+CS1 or "
+					"CS2+CS3, force non-interleaving!\n");
+			}
+			break;
+		default:
+			popts->ba_intlv_ctl = 0;
+			break;
+		}
+	}
 
-	fsl_ddr_board_options(popts, ctrl_num);
+	fsl_ddr_board_options(popts, pdimm, ctrl_num);
 
 	return 0;
 }
diff --git a/cpu/nios/asmi.c b/cpu/nios/asmi.c
index c2cd8fead..2c2e838de 100644
--- a/cpu/nios/asmi.c
+++ b/cpu/nios/asmi.c
@@ -27,8 +27,8 @@
 #include <command.h>
 #include <nios-io.h>
 
-#if !defined(CFG_NIOS_ASMIBASE)
-#error "*** CFG_NIOS_ASMIBASE not defined ***"
+#if !defined(CONFIG_SYS_NIOS_ASMIBASE)
+#error "*** CONFIG_SYS_NIOS_ASMIBASE not defined ***"
 #endif
 
 /*-----------------------------------------------------------------------*/
@@ -69,7 +69,7 @@
 #define ASMI_STATUS_WIP		(1<<0)	/* Write in progress */
 #define ASMI_STATUS_WEL		(1<<1)	/* Write enable latch */
 
-static nios_asmi_t *asmi = (nios_asmi_t *)CFG_NIOS_ASMIBASE;
+static nios_asmi_t *asmi = (nios_asmi_t *)CONFIG_SYS_NIOS_ASMIBASE;
 
 /***********************************************************************
  * Device access
diff --git a/cpu/nios/interrupts.c b/cpu/nios/interrupts.c
index 75e491d84..55a571857 100644
--- a/cpu/nios/interrupts.c
+++ b/cpu/nios/interrupts.c
@@ -68,15 +68,15 @@ void set_timer (ulong t)
 /* The board must handle this interrupt if a timer is not
  * provided.
  */
-#if defined(CFG_NIOS_TMRBASE)
+#if defined(CONFIG_SYS_NIOS_TMRBASE)
 void timer_interrupt (struct pt_regs *regs)
 {
 	/* Interrupt is cleared by writing anything to the
 	 * status register.
 	 */
-	nios_timer_t *tmr = (nios_timer_t *)CFG_NIOS_TMRBASE;
+	nios_timer_t *tmr = (nios_timer_t *)CONFIG_SYS_NIOS_TMRBASE;
 	tmr->status = 0;
-	timestamp += CFG_NIOS_TMRMS;
+	timestamp += CONFIG_SYS_NIOS_TMRMS;
 #ifdef CONFIG_STATUS_LED
 	status_led_tick(timestamp);
 #endif
@@ -125,14 +125,14 @@ int interrupt_init (void)
 {
 	int vec;
 
-#if defined(CFG_NIOS_TMRBASE)
-	nios_timer_t *tmr = (nios_timer_t *)CFG_NIOS_TMRBASE;
+#if defined(CONFIG_SYS_NIOS_TMRBASE)
+	nios_timer_t *tmr = (nios_timer_t *)CONFIG_SYS_NIOS_TMRBASE;
 
 	tmr->control &= ~NIOS_TIMER_ITO;
 	tmr->control |= NIOS_TIMER_STOP;
-#if defined(CFG_NIOS_TMRCNT)
-	tmr->periodl = CFG_NIOS_TMRCNT & 0xffff;
-	tmr->periodh = (CFG_NIOS_TMRCNT >> 16) & 0xffff;
+#if defined(CONFIG_SYS_NIOS_TMRCNT)
+	tmr->periodl = CONFIG_SYS_NIOS_TMRCNT & 0xffff;
+	tmr->periodh = (CONFIG_SYS_NIOS_TMRCNT >> 16) & 0xffff;
 #endif
 #endif
 
@@ -143,11 +143,11 @@ int interrupt_init (void)
 	}
 
 	/* Need timus interruptus -- start the lopri timer */
-#if defined(CFG_NIOS_TMRBASE)
+#if defined(CONFIG_SYS_NIOS_TMRBASE)
 	tmr->control |= ( NIOS_TIMER_ITO |
 			  NIOS_TIMER_CONT |
 			  NIOS_TIMER_START );
-	ipri (CFG_NIOS_TMRIRQ + 1);
+	ipri (CONFIG_SYS_NIOS_TMRIRQ + 1);
 #endif
 	enable_interrupts ();
 	return (0);
diff --git a/cpu/nios/serial.c b/cpu/nios/serial.c
index 5ecdc6d7e..44aa6001f 100644
--- a/cpu/nios/serial.c
+++ b/cpu/nios/serial.c
@@ -33,7 +33,7 @@ DECLARE_GLOBAL_DATA_PTR;
  *-----------------------------------------------------------------*/
 #if defined(CONFIG_CONSOLE_JTAG)
 
-static nios_jtag_t *jtag = (nios_jtag_t *)CFG_NIOS_CONSOLE;
+static nios_jtag_t *jtag = (nios_jtag_t *)CONFIG_SYS_NIOS_CONSOLE;
 
 void serial_setbrg( void ){ return; }
 int serial_init( void ) { return(0);}
@@ -71,9 +71,9 @@ int serial_getc (void)
  *-----------------------------------------------------------------*/
 #else
 
-static nios_uart_t *uart = (nios_uart_t *)CFG_NIOS_CONSOLE;
+static nios_uart_t *uart = (nios_uart_t *)CONFIG_SYS_NIOS_CONSOLE;
 
-#if defined(CFG_NIOS_FIXEDBAUD)
+#if defined(CONFIG_SYS_NIOS_FIXEDBAUD)
 
 /* Everything's already setup for fixed-baud PTF
  * assignment
@@ -98,7 +98,7 @@ int serial_init (void)
 	return (0);
 }
 
-#endif /* CFG_NIOS_FIXEDBAUD */
+#endif /* CONFIG_SYS_NIOS_FIXEDBAUD */
 
 
 /*-----------------------------------------------------------------------
diff --git a/cpu/nios/spi.c b/cpu/nios/spi.c
index 640818014..89f9797fa 100644
--- a/cpu/nios/spi.c
+++ b/cpu/nios/spi.c
@@ -28,19 +28,19 @@
 #include <nios-io.h>
 #include <spi.h>
 
-#if !defined(CFG_NIOS_SPIBASE)
-#error "*** CFG_NIOS_SPIBASE not defined ***"
+#if !defined(CONFIG_SYS_NIOS_SPIBASE)
+#error "*** CONFIG_SYS_NIOS_SPIBASE not defined ***"
 #endif
 
-#if !defined(CFG_NIOS_SPIBITS)
-#error "*** CFG_NIOS_SPIBITS not defined ***"
+#if !defined(CONFIG_SYS_NIOS_SPIBITS)
+#error "*** CONFIG_SYS_NIOS_SPIBITS not defined ***"
 #endif
 
-#if (CFG_NIOS_SPIBITS != 8) && (CFG_NIOS_SPIBITS != 16)
-#error "*** CFG_NIOS_SPIBITS should be either 8 or 16 ***"
+#if (CONFIG_SYS_NIOS_SPIBITS != 8) && (CONFIG_SYS_NIOS_SPIBITS != 16)
+#error "*** CONFIG_SYS_NIOS_SPIBITS should be either 8 or 16 ***"
 #endif
 
-static nios_spi_t	*spi	= (nios_spi_t *)CFG_NIOS_SPIBASE;
+static nios_spi_t	*spi	= (nios_spi_t *)CONFIG_SYS_NIOS_SPIBASE;
 
 /* Warning:
  * You cannot enable DEBUG for early system initalization, i. e. when
@@ -139,7 +139,7 @@ int spi_xfer(struct spi_slave *slave, int bitlen, const void *dout,
 	if (flags & SPI_XFER_BEGIN)
 		spi_cs_activate(slave);
 
-	if (!(flags & SPI_XFER_END) || bitlen > CFG_NIOS_SPIBITS) {
+	if (!(flags & SPI_XFER_END) || bitlen > CONFIG_SYS_NIOS_SPIBITS) {
 		/* leave chip select active */
 		spi->control |= NIOS_SPI_SSO;
 	}
@@ -147,7 +147,7 @@ int spi_xfer(struct spi_slave *slave, int bitlen, const void *dout,
 	for (	j = 0;				/* count each byte in */
 		j < ((bitlen + 7) / 8);		/* dout[] and din[] */
 
-#if	(CFG_NIOS_SPIBITS == 8)
+#if	(CONFIG_SYS_NIOS_SPIBITS == 8)
 		j++) {
 
 		while ((spi->status & NIOS_SPI_TRDY) == 0)
@@ -158,7 +158,7 @@ int spi_xfer(struct spi_slave *slave, int bitlen, const void *dout,
 			;
 		rxd[j] = (unsigned char)(spi->rxdata & 0xff);
 
-#elif	(CFG_NIOS_SPIBITS == 16)
+#elif	(CONFIG_SYS_NIOS_SPIBITS == 16)
 		j++, j++) {
 
 		while ((spi->status & NIOS_SPI_TRDY) == 0)
@@ -175,12 +175,12 @@ int spi_xfer(struct spi_slave *slave, int bitlen, const void *dout,
 			rxd[j+1] = (unsigned char)(spi->rxdata & 0xff);
 
 #else
-#error "*** unsupported value of CFG_NIOS_SPIBITS ***"
+#error "*** unsupported value of CONFIG_SYS_NIOS_SPIBITS ***"
 #endif
 
 	}
 
-	if (bitlen > CFG_NIOS_SPIBITS && (flags & SPI_XFER_END)) {
+	if (bitlen > CONFIG_SYS_NIOS_SPIBITS && (flags & SPI_XFER_END)) {
 		spi->control &= ~NIOS_SPI_SSO;
 	}
 
diff --git a/cpu/nios/start.S b/cpu/nios/start.S
index 9e73941a5..3578a04d5 100644
--- a/cpu/nios/start.S
+++ b/cpu/nios/start.S
@@ -23,6 +23,7 @@
 
 
 #include <config.h>
+#include <timestamp.h>
 #include <version.h>
 
 #if !defined(CONFIG_IDENT_STRING)
@@ -71,10 +72,10 @@ _start:
 	/*
 	 * STACK
 	 */
-	pfx	%hi(CFG_INIT_SP)
-	movi	%sp, %lo(CFG_INIT_SP)
-	pfx	%xhi(CFG_INIT_SP)
-	movhi	%sp, %xlo(CFG_INIT_SP)
+	pfx	%hi(CONFIG_SYS_INIT_SP)
+	movi	%sp, %lo(CONFIG_SYS_INIT_SP)
+	pfx	%xhi(CONFIG_SYS_INIT_SP)
+	movhi	%sp, %xlo(CONFIG_SYS_INIT_SP)
 	mov	%fp, %sp
 
 	pfx	%hi(4*16)
@@ -152,10 +153,10 @@ reloc:
 	/*
 	 * INIT VECTOR TABLE
 	 */
-	pfx	%hi(CFG_VECT_BASE)
-	movi	%g0, %lo(CFG_VECT_BASE)
-	pfx	%xhi(CFG_VECT_BASE)
-	movhi	%g0, %xlo(CFG_VECT_BASE)	/* dst */
+	pfx	%hi(CONFIG_SYS_VECT_BASE)
+	movi	%g0, %lo(CONFIG_SYS_VECT_BASE)
+	pfx	%xhi(CONFIG_SYS_VECT_BASE)
+	movhi	%g0, %xlo(CONFIG_SYS_VECT_BASE)	/* dst */
 	mov	%l0, %g0
 
 	pfx	%hi(_vectors)
@@ -233,5 +234,5 @@ dly_clks:
 
 version_string:
 	.ascii U_BOOT_VERSION
-	.ascii " (", __DATE__, " - ", __TIME__, ")"
+	.ascii " (", U_BOOT_DATE, " - ", U_BOOT_TIME, ")"
 	.ascii CONFIG_IDENT_STRING, "\0"
diff --git a/cpu/nios2/cpu.c b/cpu/nios2/cpu.c
index f4217a88c..6379534a0 100644
--- a/cpu/nios2/cpu.c
+++ b/cpu/nios2/cpu.c
@@ -25,14 +25,14 @@
 #include <nios2.h>
 #include <nios2-io.h>
 
-#if defined (CFG_NIOS_SYSID_BASE)
+#if defined (CONFIG_SYS_NIOS_SYSID_BASE)
 extern void display_sysid (void);
-#endif /* CFG_NIOS_SYSID_BASE */
+#endif /* CONFIG_SYS_NIOS_SYSID_BASE */
 
 int checkcpu (void)
 {
 	printf ("CPU   : Nios-II\n");
-#if !defined(CFG_NIOS_SYSID_BASE)
+#if !defined(CONFIG_SYS_NIOS_SYSID_BASE)
 	printf ("SYSID : <unknown>\n");
 #else
 	display_sysid ();
@@ -43,7 +43,7 @@ int checkcpu (void)
 
 int do_reset (void)
 {
-	void (*rst)(void) = (void(*)(void))CFG_RESET_ADDR;
+	void (*rst)(void) = (void(*)(void))CONFIG_SYS_RESET_ADDR;
 	disable_interrupts ();
 	rst();
 	return(0);
diff --git a/cpu/nios2/epcs.c b/cpu/nios2/epcs.c
index 414c38c2b..968b50f3d 100644
--- a/cpu/nios2/epcs.c
+++ b/cpu/nios2/epcs.c
@@ -23,7 +23,7 @@
 
 #include <common.h>
 
-#if defined(CFG_NIOS_EPCSBASE)
+#if defined(CONFIG_SYS_NIOS_EPCSBASE)
 #include <command.h>
 #include <asm/io.h>
 #include <nios2-io.h>
@@ -72,7 +72,7 @@
  */
 #define EPCS_TIMEOUT		100	/* 100 msec timeout */
 
-static nios_spi_t *epcs = (nios_spi_t *)CFG_NIOS_EPCSBASE;
+static nios_spi_t *epcs = (nios_spi_t *)CONFIG_SYS_NIOS_EPCSBASE;
 
 /***********************************************************************
  * Device access
diff --git a/cpu/nios2/interrupts.c b/cpu/nios2/interrupts.c
index ec5db31b0..1c3566ebf 100644
--- a/cpu/nios2/interrupts.c
+++ b/cpu/nios2/interrupts.c
@@ -37,8 +37,8 @@
 #include <status_led.h>
 #endif
 
-#if defined(CFG_NIOS_TMRBASE) && !defined(CFG_NIOS_TMRIRQ)
-#error CFG_NIOS_TMRIRQ not defined (see documentation)
+#if defined(CONFIG_SYS_NIOS_TMRBASE) && !defined(CONFIG_SYS_NIOS_TMRIRQ)
+#error CONFIG_SYS_NIOS_TMRIRQ not defined (see documentation)
 #endif
 
 /****************************************************************************/
@@ -74,7 +74,7 @@ void set_timer (ulong t)
 /* The board must handle this interrupt if a timer is not
  * provided.
  */
-#if defined(CFG_NIOS_TMRBASE)
+#if defined(CONFIG_SYS_NIOS_TMRBASE)
 void tmr_isr (void *arg)
 {
 	nios_timer_t *tmr = (nios_timer_t *)arg;
@@ -82,7 +82,7 @@ void tmr_isr (void *arg)
 	 * status register.
 	 */
 	writel (&tmr->status, 0);
-	timestamp += CFG_NIOS_TMRMS;
+	timestamp += CONFIG_SYS_NIOS_TMRMS;
 #ifdef CONFIG_STATUS_LED
 	status_led_tick(timestamp);
 #endif
@@ -90,22 +90,22 @@ void tmr_isr (void *arg)
 
 static void tmr_init (void)
 {
-	nios_timer_t *tmr =(nios_timer_t *)CFG_NIOS_TMRBASE;
+	nios_timer_t *tmr =(nios_timer_t *)CONFIG_SYS_NIOS_TMRBASE;
 
 	writel (&tmr->status, 0);
 	writel (&tmr->control, 0);
 	writel (&tmr->control, NIOS_TIMER_STOP);
 
-#if defined(CFG_NIOS_TMRCNT)
-	writel (&tmr->periodl, CFG_NIOS_TMRCNT & 0xffff);
-	writel (&tmr->periodh, (CFG_NIOS_TMRCNT >> 16) & 0xffff);
+#if defined(CONFIG_SYS_NIOS_TMRCNT)
+	writel (&tmr->periodl, CONFIG_SYS_NIOS_TMRCNT & 0xffff);
+	writel (&tmr->periodh, (CONFIG_SYS_NIOS_TMRCNT >> 16) & 0xffff);
 #endif
 	writel (&tmr->control, NIOS_TIMER_ITO | NIOS_TIMER_CONT |
 			  NIOS_TIMER_START );
-	irq_install_handler (CFG_NIOS_TMRIRQ, tmr_isr, (void *)tmr);
+	irq_install_handler (CONFIG_SYS_NIOS_TMRIRQ, tmr_isr, (void *)tmr);
 }
 
-#endif /* CFG_NIOS_TMRBASE */
+#endif /* CONFIG_SYS_NIOS_TMRBASE */
 
 /*************************************************************************/
 int disable_interrupts (void)
@@ -195,7 +195,7 @@ int interrupt_init (void)
 		vecs[i].count = 0;
 	}
 
-#if defined(CFG_NIOS_TMRBASE)
+#if defined(CONFIG_SYS_NIOS_TMRBASE)
 	tmr_init ();
 #endif
 
diff --git a/cpu/nios2/serial.c b/cpu/nios2/serial.c
index 0bd3821e3..8bbb803a6 100644
--- a/cpu/nios2/serial.c
+++ b/cpu/nios2/serial.c
@@ -34,7 +34,7 @@ DECLARE_GLOBAL_DATA_PTR;
  *-----------------------------------------------------------------*/
 #if defined(CONFIG_CONSOLE_JTAG)
 
-static nios_jtag_t *jtag = (nios_jtag_t *)CFG_NIOS_CONSOLE;
+static nios_jtag_t *jtag = (nios_jtag_t *)CONFIG_SYS_NIOS_CONSOLE;
 
 void serial_setbrg( void ){ return; }
 int serial_init( void ) { return(0);}
@@ -79,9 +79,9 @@ int serial_getc (void)
  *-----------------------------------------------------------------*/
 #else
 
-static nios_uart_t *uart = (nios_uart_t *) CFG_NIOS_CONSOLE;
+static nios_uart_t *uart = (nios_uart_t *) CONFIG_SYS_NIOS_CONSOLE;
 
-#if defined(CFG_NIOS_FIXEDBAUD)
+#if defined(CONFIG_SYS_NIOS_FIXEDBAUD)
 
 /* Everything's already setup for fixed-baud PTF
  * assignment
@@ -106,7 +106,7 @@ int serial_init (void)
 	return (0);
 }
 
-#endif /* CFG_NIOS_FIXEDBAUD */
+#endif /* CONFIG_SYS_NIOS_FIXEDBAUD */
 
 
 /*-----------------------------------------------------------------------
diff --git a/cpu/nios2/start.S b/cpu/nios2/start.S
index 6c6f294b0..31cd5b004 100644
--- a/cpu/nios2/start.S
+++ b/cpu/nios2/start.S
@@ -23,6 +23,7 @@
 
 
 #include <config.h>
+#include <timestamp.h>
 #include <version.h>
 
 /*************************************************************************
@@ -39,9 +40,9 @@ _start:
 	 * just be invalidating the cache a second time. If cache
 	 * is not implemented initi behaves as nop.
 	 */
-	ori	r4, r0, %lo(CFG_ICACHELINE_SIZE)
-	movhi	r5, %hi(CFG_ICACHE_SIZE)
-	ori	r5, r5, %lo(CFG_ICACHE_SIZE)
+	ori	r4, r0, %lo(CONFIG_SYS_ICACHELINE_SIZE)
+	movhi	r5, %hi(CONFIG_SYS_ICACHE_SIZE)
+	ori	r5, r5, %lo(CONFIG_SYS_ICACHE_SIZE)
 	mov	r6, r0
 0:	initi	r6
 	add	r6, r6, r4
@@ -67,10 +68,10 @@ _except_end:
 	/* DCACHE INIT -- if dcache not implemented, initd behaves as
 	 * nop.
 	 */
-	movhi	r4, %hi(CFG_DCACHELINE_SIZE)
-	ori	r4, r4, %lo(CFG_DCACHELINE_SIZE)
-	movhi	r5, %hi(CFG_DCACHE_SIZE)
-	ori	r5, r5, %lo(CFG_DCACHE_SIZE)
+	movhi	r4, %hi(CONFIG_SYS_DCACHELINE_SIZE)
+	ori	r4, r4, %lo(CONFIG_SYS_DCACHELINE_SIZE)
+	movhi	r5, %hi(CONFIG_SYS_DCACHE_SIZE)
+	ori	r5, r5, %lo(CONFIG_SYS_DCACHE_SIZE)
 	mov	r6, r0
 1:	initd	0(r6)
 	add	r6, r6, r4
@@ -136,8 +137,8 @@ _reloc:
 	ori	r4, r4, %lo(_except_start)
 	movhi	r5, %hi(_except_end)
 	ori	r5, r5, %lo(_except_end)
-	movhi	r6, %hi(CFG_EXCEPTION_ADDR)
-	ori	r6, r6, %lo(CFG_EXCEPTION_ADDR)
+	movhi	r6, %hi(CONFIG_SYS_EXCEPTION_ADDR)
+	ori	r6, r6, %lo(CONFIG_SYS_EXCEPTION_ADDR)
 	beq	r4, r6, 7f	/* Skip if at proper addr */
 
 6:	ldwio	r7, 0(r4)
@@ -150,8 +151,8 @@ _reloc:
 
 	/* STACK INIT -- zero top two words for call back chain.
 	 */
-	movhi	sp, %hi(CFG_INIT_SP)
-	ori	sp, sp, %lo(CFG_INIT_SP)
+	movhi	sp, %hi(CONFIG_SYS_INIT_SP)
+	ori	sp, sp, %lo(CONFIG_SYS_INIT_SP)
 	addi	sp, sp, -8
 	stw	r0, 0(sp)
 	stw	r0, 4(sp)
@@ -195,7 +196,7 @@ _reloc:
 
 dly_clks:
 
-#if (CFG_ICACHE_SIZE > 0)
+#if (CONFIG_SYS_ICACHE_SIZE > 0)
 	subi	r4, r4, 3		/* 3 clocks/loop	*/
 #else
 	subi	r4, r4, 12		/* 12 clocks/loop	*/
@@ -212,5 +213,5 @@ dly_clks:
 
 version_string:
 	.ascii U_BOOT_VERSION
-	.ascii " (", __DATE__, " - ", __TIME__, ")"
+	.ascii " (", U_BOOT_DATE, " - ", U_BOOT_TIME, ")"
 	.ascii CONFIG_IDENT_STRING, "\0"
diff --git a/cpu/nios2/sysid.c b/cpu/nios2/sysid.c
index 697ed03a2..afd5d83d9 100644
--- a/cpu/nios2/sysid.c
+++ b/cpu/nios2/sysid.c
@@ -23,7 +23,7 @@
 
 #include <common.h>
 
-#if defined (CFG_NIOS_SYSID_BASE)
+#if defined (CONFIG_SYS_NIOS_SYSID_BASE)
 
 #include <command.h>
 #include <asm/io.h>
@@ -32,7 +32,7 @@
 
 void display_sysid (void)
 {
-	struct nios_sysid_t *sysid = (struct nios_sysid_t *)CFG_NIOS_SYSID_BASE;
+	struct nios_sysid_t *sysid = (struct nios_sysid_t *)CONFIG_SYS_NIOS_SYSID_BASE;
 	struct tm t;
 	char asc[32];
 	time_t stamp;
@@ -55,4 +55,4 @@ U_BOOT_CMD(
 	"sysid   - display Nios-II system id\n\n",
 	"\n    - display Nios-II system id\n"
 );
-#endif /* CFG_NIOS_SYSID_BASE */
+#endif /* CONFIG_SYS_NIOS_SYSID_BASE */
diff --git a/cpu/ppc4xx/40x_spd_sdram.c b/cpu/ppc4xx/40x_spd_sdram.c
index b21b13e49..57861b359 100644
--- a/cpu/ppc4xx/40x_spd_sdram.c
+++ b/cpu/ppc4xx/40x_spd_sdram.c
@@ -52,12 +52,12 @@
 /*
  * Set default values
  */
-#ifndef CFG_I2C_SPEED
-#define CFG_I2C_SPEED	50000
+#ifndef CONFIG_SYS_I2C_SPEED
+#define CONFIG_SYS_I2C_SPEED	50000
 #endif
 
-#ifndef CFG_I2C_SLAVE
-#define CFG_I2C_SLAVE	0xFE
+#ifndef CONFIG_SYS_I2C_SLAVE
+#define CONFIG_SYS_I2C_SLAVE	0xFE
 #endif
 
 #define ONE_BILLION	1000000000
@@ -163,7 +163,7 @@ long int spd_sdram(int(read_spd)(uint addr))
 		 * Make sure I2C controller is initialized
 		 * before continuing.
 		 */
-		i2c_init(CFG_I2C_SPEED, CFG_I2C_SLAVE);
+		i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
 	}
 
 	/* Make shure we are using SDRAM */
diff --git a/cpu/ppc4xx/44x_spd_ddr.c b/cpu/ppc4xx/44x_spd_ddr.c
index 9efcedefe..153391e59 100644
--- a/cpu/ppc4xx/44x_spd_ddr.c
+++ b/cpu/ppc4xx/44x_spd_ddr.c
@@ -62,12 +62,12 @@
 /*
  * Set default values
  */
-#ifndef CFG_I2C_SPEED
-#define CFG_I2C_SPEED	50000
+#ifndef CONFIG_SYS_I2C_SPEED
+#define CONFIG_SYS_I2C_SPEED	50000
 #endif
 
-#ifndef CFG_I2C_SLAVE
-#define CFG_I2C_SLAVE	0xFE
+#ifndef CONFIG_SYS_I2C_SLAVE
+#define CONFIG_SYS_I2C_SLAVE	0xFE
 #endif
 
 #define ONE_BILLION	1000000000
@@ -119,7 +119,7 @@ struct bank_param {
 
 typedef struct bank_param BANKPARMS;
 
-#ifdef CFG_SIMULATE_SPD_EEPROM
+#ifdef CONFIG_SYS_SIMULATE_SPD_EEPROM
 extern const unsigned char cfg_simulate_spd_eeprom[128];
 #endif
 
@@ -174,7 +174,7 @@ long int spd_sdram(void) {
 	 * Make sure I2C controller is initialized
 	 * before continuing.
 	 */
-	i2c_init(CFG_I2C_SPEED, CFG_I2C_SLAVE);
+	i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
 
 	/*
 	 * Read the SPD information using I2C interface. Check to see if the
@@ -265,7 +265,7 @@ long int spd_sdram(void) {
 	/*
 	 * If ecc is enabled, initialize the parity bits.
 	 */
-	ecc_init(CFG_SDRAM_BASE, total_size);
+	ecc_init(CONFIG_SYS_SDRAM_BASE, total_size);
 #endif
 
 	return total_size;
@@ -275,14 +275,14 @@ static unsigned char spd_read(uchar chip, uint addr)
 {
 	unsigned char data[2];
 
-#ifdef CFG_SIMULATE_SPD_EEPROM
-	if (chip == CFG_SIMULATE_SPD_EEPROM) {
+#ifdef CONFIG_SYS_SIMULATE_SPD_EEPROM
+	if (chip == CONFIG_SYS_SIMULATE_SPD_EEPROM) {
 		/*
 		 * Onboard spd eeprom requested -> simulate values
 		 */
 		return cfg_simulate_spd_eeprom[addr];
 	}
-#endif /* CFG_SIMULATE_SPD_EEPROM */
+#endif /* CONFIG_SYS_SIMULATE_SPD_EEPROM */
 
 	if (i2c_probe(chip) == 0) {
 		if (i2c_read(chip, addr, 1, data, 1) == 0) {
@@ -1120,7 +1120,7 @@ static unsigned long program_bxcr(unsigned long *dimm_populated,
 	/*
 	 * reset the bank_base address
 	 */
-	bank_base_addr = CFG_SDRAM_BASE;
+	bank_base_addr = CONFIG_SYS_SDRAM_BASE;
 
 	for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
 		if (dimm_populated[dimm_num] == TRUE) {
diff --git a/cpu/ppc4xx/44x_spd_ddr2.c b/cpu/ppc4xx/44x_spd_ddr2.c
index 15250d470..b40e4b151 100644
--- a/cpu/ppc4xx/44x_spd_ddr2.c
+++ b/cpu/ppc4xx/44x_spd_ddr2.c
@@ -60,7 +60,25 @@
 		       "SDRAM_" #mnemonic, SDRAM_##mnemonic, data);	\
 	} while (0)
 
-static inline void ppc4xx_ibm_ddr2_register_dump(void);
+#if defined(CONFIG_440)
+/*
+ * This DDR2 setup code can dynamically setup the TLB entries for the DDR2
+ * memory region. Right now the cache should still be disabled in U-Boot
+ * because of the EMAC driver, that need its buffer descriptor to be located
+ * in non cached memory.
+ *
+ * If at some time this restriction doesn't apply anymore, just define
+ * CONFIG_4xx_DCACHE in the board config file and this code should setup
+ * everything correctly.
+ */
+#ifdef CONFIG_4xx_DCACHE
+/* enable caching on SDRAM */
+#define MY_TLB_WORD2_I_ENABLE		0
+#else
+/* disable caching on SDRAM */
+#define MY_TLB_WORD2_I_ENABLE		TLB_WORD2_I_ENABLE
+#endif /* CONFIG_4xx_DCACHE */
+#endif /* CONFIG_440 */
 
 #if defined(CONFIG_SPD_EEPROM)
 
@@ -133,22 +151,6 @@ static inline void ppc4xx_ibm_ddr2_register_dump(void);
 #define NUMLOOPS	64		/* memory test loops */
 
 /*
- * This DDR2 setup code can dynamically setup the TLB entries for the DDR2 memory
- * region. Right now the cache should still be disabled in U-Boot because of the
- * EMAC driver, that need it's buffer descriptor to be located in non cached
- * memory.
- *
- * If at some time this restriction doesn't apply anymore, just define
- * CONFIG_4xx_DCACHE in the board config file and this code should setup
- * everything correctly.
- */
-#ifdef CONFIG_4xx_DCACHE
-#define MY_TLB_WORD2_I_ENABLE	0			/* enable caching on SDRAM */
-#else
-#define MY_TLB_WORD2_I_ENABLE	TLB_WORD2_I_ENABLE	/* disable caching on SDRAM */
-#endif
-
-/*
  * Newer PPC's like 440SPe, 460EX/GT can be equipped with more than 2GB of SDRAM.
  * To support such configurations, we "only" map the first 2GB via the TLB's. We
  * need some free virtual address space for the remaining peripherals like, SoC
@@ -260,62 +262,19 @@ static void program_ecc_addr(unsigned long start_address,
 			     unsigned long num_bytes,
 			     unsigned long tlb_word2_i_value);
 #endif
+#if !defined(CONFIG_PPC4xx_DDR_AUTOCALIBRATION)
 static void program_DQS_calibration(unsigned long *dimm_populated,
-				    unsigned char *iic0_dimm_addr,
-				    unsigned long num_dimm_banks);
+				unsigned char *iic0_dimm_addr,
+				unsigned long num_dimm_banks);
 #ifdef HARD_CODED_DQS /* calibration test with hardvalues */
 static void	test(void);
 #else
 static void	DQS_calibration_process(void);
 #endif
+#endif
 int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
 void dcbz_area(u32 start_address, u32 num_bytes);
 
-static u32 mfdcr_any(u32 dcr)
-{
-	u32 val;
-
-	switch (dcr) {
-	case SDRAM_R0BAS + 0:
-		val = mfdcr(SDRAM_R0BAS + 0);
-		break;
-	case SDRAM_R0BAS + 1:
-		val = mfdcr(SDRAM_R0BAS + 1);
-		break;
-	case SDRAM_R0BAS + 2:
-		val = mfdcr(SDRAM_R0BAS + 2);
-		break;
-	case SDRAM_R0BAS + 3:
-		val = mfdcr(SDRAM_R0BAS + 3);
-		break;
-	default:
-		printf("DCR %d not defined in case statement!!!\n", dcr);
-		val = 0; /* just to satisfy the compiler */
-	}
-
-	return val;
-}
-
-static void mtdcr_any(u32 dcr, u32 val)
-{
-	switch (dcr) {
-	case SDRAM_R0BAS + 0:
-		mtdcr(SDRAM_R0BAS + 0, val);
-		break;
-	case SDRAM_R0BAS + 1:
-		mtdcr(SDRAM_R0BAS + 1, val);
-		break;
-	case SDRAM_R0BAS + 2:
-		mtdcr(SDRAM_R0BAS + 2, val);
-		break;
-	case SDRAM_R0BAS + 3:
-		mtdcr(SDRAM_R0BAS + 3, val);
-		break;
-	default:
-		printf("DCR %d not defined in case statement!!!\n", dcr);
-	}
-}
-
 static unsigned char spd_read(uchar chip, uint addr)
 {
 	unsigned char data[2];
@@ -447,8 +406,8 @@ phys_size_t initdram(int board_type)
 	 */
 
 	/* switch to correct I2C bus */
-	I2C_SET_BUS(CFG_SPD_BUS_NUM);
-	i2c_init(CFG_I2C_SPEED, CFG_I2C_SLAVE);
+	I2C_SET_BUS(CONFIG_SYS_SPD_BUS_NUM);
+	i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
 
 	/*------------------------------------------------------------------
 	 * Clear out the serial presence detect buffers.
@@ -609,7 +568,11 @@ phys_size_t initdram(int board_type)
 	/*------------------------------------------------------------------
 	 * DQS calibration.
 	 *-----------------------------------------------------------------*/
+#if defined(CONFIG_PPC4xx_DDR_AUTOCALIBRATION)
+	DQS_autocalibration();
+#else
 	program_DQS_calibration(dimm_populated, iic0_dimm_addr, num_dimm_banks);
+#endif
 
 #ifdef CONFIG_DDR_ECC
 	/*------------------------------------------------------------------
@@ -2302,10 +2265,12 @@ static void program_memory_queue(unsigned long *dimm_populated,
 	/*
 	 * Set optimal value for Memory Queue HB/LL Configuration registers
 	 */
-	mtdcr(SDRAM_CONF1HB, mfdcr(SDRAM_CONF1HB) | SDRAM_CONF1HB_AAFR |
-	      SDRAM_CONF1HB_RPEN | SDRAM_CONF1HB_RFTE);
-	mtdcr(SDRAM_CONF1LL, mfdcr(SDRAM_CONF1LL) | SDRAM_CONF1LL_AAFR |
-	      SDRAM_CONF1LL_RPEN | SDRAM_CONF1LL_RFTE);
+	mtdcr(SDRAM_CONF1HB, (mfdcr(SDRAM_CONF1HB) & ~SDRAM_CONF1HB_MASK) |
+	      SDRAM_CONF1HB_AAFR | SDRAM_CONF1HB_RPEN | SDRAM_CONF1HB_RFTE |
+	      SDRAM_CONF1HB_RPLM | SDRAM_CONF1HB_WRCL);
+	mtdcr(SDRAM_CONF1LL, (mfdcr(SDRAM_CONF1LL) & ~SDRAM_CONF1LL_MASK) |
+	      SDRAM_CONF1LL_AAFR | SDRAM_CONF1LL_RPEN | SDRAM_CONF1LL_RFTE |
+	      SDRAM_CONF1LL_RPLM);
 	mtdcr(SDRAM_CONFPATHB, mfdcr(SDRAM_CONFPATHB) | SDRAM_CONFPATHB_TPEN);
 #endif
 }
@@ -2329,18 +2294,6 @@ static unsigned long is_ecc_enabled(void)
 	return ecc;
 }
 
-static void blank_string(int size)
-{
-	int i;
-
-	for (i=0; i<size; i++)
-		putc('\b');
-	for (i=0; i<size; i++)
-		putc(' ');
-	for (i=0; i<size; i++)
-		putc('\b');
-}
-
 #ifdef CONFIG_DDR_ECC
 /*-----------------------------------------------------------------------------+
  * program_ecc.
@@ -2468,6 +2421,7 @@ static void program_ecc_addr(unsigned long start_address,
 }
 #endif
 
+#if !defined(CONFIG_PPC4xx_DDR_AUTOCALIBRATION)
 /*-----------------------------------------------------------------------------+
  * program_DQS_calibration.
  *-----------------------------------------------------------------------------*/
@@ -3001,15 +2955,17 @@ static void test(void)
 		(ppcMfdcr_sdram(SDRAM_MCOPT1) & ~SDRAM_MCOPT1_MCHK_MASK)
 		| ecc_temp);
 }
-#endif
+#endif /* !HARD_CODED_DQS */
+#endif /* !defined(CONFIG_PPC4xx_DDR_AUTOCALIBRATION) */
 
 #else /* CONFIG_SPD_EEPROM */
 
 /*-----------------------------------------------------------------------------
  * Function:	initdram
- * Description: Configures the PPC405EX(r) DDR1/DDR2 SDRAM memory
- * 		banks. The configuration is performed using static, compile-
+ * Description: Configures the PPC4xx IBM DDR1/DDR2 SDRAM memory controller.
+ * 		The configuration is performed using static, compile-
  *		time parameters.
+ * 		Configures the PPC405EX(r) and PPC460EX/GT
  *---------------------------------------------------------------------------*/
 phys_size_t initdram(int board_type)
 {
@@ -3025,64 +2981,76 @@ phys_size_t initdram(int board_type)
 #if !defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_NAND_SPL)
 	unsigned long val;
 
+#if defined(CONFIG_440)
+	mtdcr(SDRAM_R0BAS,	CONFIG_SYS_SDRAM_R0BAS);
+	mtdcr(SDRAM_R1BAS,	CONFIG_SYS_SDRAM_R1BAS);
+	mtdcr(SDRAM_R2BAS,	CONFIG_SYS_SDRAM_R2BAS);
+	mtdcr(SDRAM_R3BAS,	CONFIG_SYS_SDRAM_R3BAS);
+	mtdcr(SDRAM_PLBADDULL,	CONFIG_SYS_SDRAM_PLBADDULL);	/* MQ0_BAUL */
+	mtdcr(SDRAM_PLBADDUHB,	CONFIG_SYS_SDRAM_PLBADDUHB);	/* MQ0_BAUH */
+	mtdcr(SDRAM_CONF1LL,	CONFIG_SYS_SDRAM_CONF1LL);
+	mtdcr(SDRAM_CONF1HB,	CONFIG_SYS_SDRAM_CONF1HB);
+	mtdcr(SDRAM_CONFPATHB,	CONFIG_SYS_SDRAM_CONFPATHB);
+#endif
+
 	/* Set Memory Bank Configuration Registers */
 
-	mtsdram(SDRAM_MB0CF, CFG_SDRAM0_MB0CF);
-	mtsdram(SDRAM_MB1CF, CFG_SDRAM0_MB1CF);
-	mtsdram(SDRAM_MB2CF, CFG_SDRAM0_MB2CF);
-	mtsdram(SDRAM_MB3CF, CFG_SDRAM0_MB3CF);
+	mtsdram(SDRAM_MB0CF, CONFIG_SYS_SDRAM0_MB0CF);
+	mtsdram(SDRAM_MB1CF, CONFIG_SYS_SDRAM0_MB1CF);
+	mtsdram(SDRAM_MB2CF, CONFIG_SYS_SDRAM0_MB2CF);
+	mtsdram(SDRAM_MB3CF, CONFIG_SYS_SDRAM0_MB3CF);
 
 	/* Set Memory Clock Timing Register */
 
-	mtsdram(SDRAM_CLKTR, CFG_SDRAM0_CLKTR);
+	mtsdram(SDRAM_CLKTR, CONFIG_SYS_SDRAM0_CLKTR);
 
 	/* Set Refresh Time Register */
 
-	mtsdram(SDRAM_RTR, CFG_SDRAM0_RTR);
+	mtsdram(SDRAM_RTR, CONFIG_SYS_SDRAM0_RTR);
 
 	/* Set SDRAM Timing Registers */
 
-	mtsdram(SDRAM_SDTR1, CFG_SDRAM0_SDTR1);
-	mtsdram(SDRAM_SDTR2, CFG_SDRAM0_SDTR2);
-	mtsdram(SDRAM_SDTR3, CFG_SDRAM0_SDTR3);
+	mtsdram(SDRAM_SDTR1, CONFIG_SYS_SDRAM0_SDTR1);
+	mtsdram(SDRAM_SDTR2, CONFIG_SYS_SDRAM0_SDTR2);
+	mtsdram(SDRAM_SDTR3, CONFIG_SYS_SDRAM0_SDTR3);
 
 	/* Set Mode and Extended Mode Registers */
 
-	mtsdram(SDRAM_MMODE, CFG_SDRAM0_MMODE);
-	mtsdram(SDRAM_MEMODE, CFG_SDRAM0_MEMODE);
+	mtsdram(SDRAM_MMODE, CONFIG_SYS_SDRAM0_MMODE);
+	mtsdram(SDRAM_MEMODE, CONFIG_SYS_SDRAM0_MEMODE);
 
 	/* Set Memory Controller Options 1 Register */
 
-	mtsdram(SDRAM_MCOPT1, CFG_SDRAM0_MCOPT1);
+	mtsdram(SDRAM_MCOPT1, CONFIG_SYS_SDRAM0_MCOPT1);
 
 	/* Set Manual Initialization Control Registers */
 
-	mtsdram(SDRAM_INITPLR0, CFG_SDRAM0_INITPLR0);
-	mtsdram(SDRAM_INITPLR1, CFG_SDRAM0_INITPLR1);
-	mtsdram(SDRAM_INITPLR2, CFG_SDRAM0_INITPLR2);
-	mtsdram(SDRAM_INITPLR3, CFG_SDRAM0_INITPLR3);
-	mtsdram(SDRAM_INITPLR4, CFG_SDRAM0_INITPLR4);
-	mtsdram(SDRAM_INITPLR5, CFG_SDRAM0_INITPLR5);
-	mtsdram(SDRAM_INITPLR6, CFG_SDRAM0_INITPLR6);
-	mtsdram(SDRAM_INITPLR7, CFG_SDRAM0_INITPLR7);
-	mtsdram(SDRAM_INITPLR8, CFG_SDRAM0_INITPLR8);
-	mtsdram(SDRAM_INITPLR9, CFG_SDRAM0_INITPLR9);
-	mtsdram(SDRAM_INITPLR10, CFG_SDRAM0_INITPLR10);
-	mtsdram(SDRAM_INITPLR11, CFG_SDRAM0_INITPLR11);
-	mtsdram(SDRAM_INITPLR12, CFG_SDRAM0_INITPLR12);
-	mtsdram(SDRAM_INITPLR13, CFG_SDRAM0_INITPLR13);
-	mtsdram(SDRAM_INITPLR14, CFG_SDRAM0_INITPLR14);
-	mtsdram(SDRAM_INITPLR15, CFG_SDRAM0_INITPLR15);
+	mtsdram(SDRAM_INITPLR0, CONFIG_SYS_SDRAM0_INITPLR0);
+	mtsdram(SDRAM_INITPLR1, CONFIG_SYS_SDRAM0_INITPLR1);
+	mtsdram(SDRAM_INITPLR2, CONFIG_SYS_SDRAM0_INITPLR2);
+	mtsdram(SDRAM_INITPLR3, CONFIG_SYS_SDRAM0_INITPLR3);
+	mtsdram(SDRAM_INITPLR4, CONFIG_SYS_SDRAM0_INITPLR4);
+	mtsdram(SDRAM_INITPLR5, CONFIG_SYS_SDRAM0_INITPLR5);
+	mtsdram(SDRAM_INITPLR6, CONFIG_SYS_SDRAM0_INITPLR6);
+	mtsdram(SDRAM_INITPLR7, CONFIG_SYS_SDRAM0_INITPLR7);
+	mtsdram(SDRAM_INITPLR8, CONFIG_SYS_SDRAM0_INITPLR8);
+	mtsdram(SDRAM_INITPLR9, CONFIG_SYS_SDRAM0_INITPLR9);
+	mtsdram(SDRAM_INITPLR10, CONFIG_SYS_SDRAM0_INITPLR10);
+	mtsdram(SDRAM_INITPLR11, CONFIG_SYS_SDRAM0_INITPLR11);
+	mtsdram(SDRAM_INITPLR12, CONFIG_SYS_SDRAM0_INITPLR12);
+	mtsdram(SDRAM_INITPLR13, CONFIG_SYS_SDRAM0_INITPLR13);
+	mtsdram(SDRAM_INITPLR14, CONFIG_SYS_SDRAM0_INITPLR14);
+	mtsdram(SDRAM_INITPLR15, CONFIG_SYS_SDRAM0_INITPLR15);
 
 	/* Set On-Die Termination Registers */
 
-	mtsdram(SDRAM_CODT, CFG_SDRAM0_CODT);
-	mtsdram(SDRAM_MODT0, CFG_SDRAM0_MODT0);
-	mtsdram(SDRAM_MODT1, CFG_SDRAM0_MODT1);
+	mtsdram(SDRAM_CODT, CONFIG_SYS_SDRAM0_CODT);
+	mtsdram(SDRAM_MODT0, CONFIG_SYS_SDRAM0_MODT0);
+	mtsdram(SDRAM_MODT1, CONFIG_SYS_SDRAM0_MODT1);
 
 	/* Set Write Timing Register */
 
-	mtsdram(SDRAM_WRDTR, CFG_SDRAM0_WRDTR);
+	mtsdram(SDRAM_WRDTR, CONFIG_SYS_SDRAM0_WRDTR);
 
 	/*
 	 * Start Initialization by SDRAM0_MCOPT2[SREN] = 0 and
@@ -3103,10 +3071,13 @@ phys_size_t initdram(int board_type)
 
 	/* Set Delay Control Registers */
 
-	mtsdram(SDRAM_DLCR, CFG_SDRAM0_DLCR);
-	mtsdram(SDRAM_RDCC, CFG_SDRAM0_RDCC);
-	mtsdram(SDRAM_RQDC, CFG_SDRAM0_RQDC);
-	mtsdram(SDRAM_RFDC, CFG_SDRAM0_RFDC);
+	mtsdram(SDRAM_DLCR, CONFIG_SYS_SDRAM0_DLCR);
+
+#if !defined(CONFIG_PPC4xx_DDR_AUTOCALIBRATION)
+	mtsdram(SDRAM_RDCC, CONFIG_SYS_SDRAM0_RDCC);
+	mtsdram(SDRAM_RQDC, CONFIG_SYS_SDRAM0_RQDC);
+	mtsdram(SDRAM_RFDC, CONFIG_SYS_SDRAM0_RFDC);
+#endif /* !CONFIG_PPC4xx_DDR_AUTOCALIBRATION */
 
 	/*
 	 * Enable Controller by SDRAM0_MCOPT2[DCEN] = 1:
@@ -3115,18 +3086,116 @@ phys_size_t initdram(int board_type)
 	mfsdram(SDRAM_MCOPT2, val);
 	mtsdram(SDRAM_MCOPT2, val | SDRAM_MCOPT2_DCEN_ENABLE);
 
+#if defined(CONFIG_440)
+	/*
+	 * Program TLB entries with caches enabled, for best performace
+	 * while auto-calibrating and ECC generation
+	 */
+	program_tlb(0, 0, (CONFIG_SYS_MBYTES_SDRAM << 20), 0);
+#endif
+
+#if defined(CONFIG_PPC4xx_DDR_AUTOCALIBRATION)
+#if !defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL)
+	/*------------------------------------------------------------------
+	 | DQS calibration.
+	 +-----------------------------------------------------------------*/
+	DQS_autocalibration();
+#endif /* !defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL) */
+#endif /* CONFIG_PPC4xx_DDR_AUTOCALIBRATION */
+
 #if defined(CONFIG_DDR_ECC)
-	ecc_init(CFG_SDRAM_BASE, CFG_MBYTES_SDRAM << 20);
+	ecc_init(CONFIG_SYS_SDRAM_BASE, CONFIG_SYS_MBYTES_SDRAM << 20);
 #endif /* defined(CONFIG_DDR_ECC) */
 
+#if defined(CONFIG_440)
+	/*
+	 * Now after initialization (auto-calibration and ECC generation)
+	 * remove the TLB entries with caches enabled and program again with
+	 * desired cache functionality
+	 */
+	remove_tlb(0, (CONFIG_SYS_MBYTES_SDRAM << 20));
+	program_tlb(0, 0, (CONFIG_SYS_MBYTES_SDRAM << 20), MY_TLB_WORD2_I_ENABLE);
+#endif
+
 	ppc4xx_ibm_ddr2_register_dump();
+
+#if defined(CONFIG_PPC4xx_DDR_AUTOCALIBRATION)
+	/*
+	 * Clear potential errors resulting from auto-calibration.
+	 * If not done, then we could get an interrupt later on when
+	 * exceptions are enabled.
+	 */
+	set_mcsr(get_mcsr());
+#endif /* CONFIG_PPC4xx_DDR_AUTOCALIBRATION */
+
 #endif /* !defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_NAND_SPL) */
 
-	return (CFG_MBYTES_SDRAM << 20);
+	return (CONFIG_SYS_MBYTES_SDRAM << 20);
 }
 #endif /* CONFIG_SPD_EEPROM */
 
-static inline void ppc4xx_ibm_ddr2_register_dump(void)
+#if !defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL)
+#if defined(CONFIG_440)
+u32 mfdcr_any(u32 dcr)
+{
+	u32 val;
+
+	switch (dcr) {
+	case SDRAM_R0BAS + 0:
+		val = mfdcr(SDRAM_R0BAS + 0);
+		break;
+	case SDRAM_R0BAS + 1:
+		val = mfdcr(SDRAM_R0BAS + 1);
+		break;
+	case SDRAM_R0BAS + 2:
+		val = mfdcr(SDRAM_R0BAS + 2);
+		break;
+	case SDRAM_R0BAS + 3:
+		val = mfdcr(SDRAM_R0BAS + 3);
+		break;
+	default:
+		printf("DCR %d not defined in case statement!!!\n", dcr);
+		val = 0; /* just to satisfy the compiler */
+	}
+
+	return val;
+}
+
+void mtdcr_any(u32 dcr, u32 val)
+{
+	switch (dcr) {
+	case SDRAM_R0BAS + 0:
+		mtdcr(SDRAM_R0BAS + 0, val);
+		break;
+	case SDRAM_R0BAS + 1:
+		mtdcr(SDRAM_R0BAS + 1, val);
+		break;
+	case SDRAM_R0BAS + 2:
+		mtdcr(SDRAM_R0BAS + 2, val);
+		break;
+	case SDRAM_R0BAS + 3:
+		mtdcr(SDRAM_R0BAS + 3, val);
+		break;
+	default:
+		printf("DCR %d not defined in case statement!!!\n", dcr);
+	}
+}
+#endif /* defined(CONFIG_440) */
+
+void blank_string(int size)
+{
+	int i;
+
+	for (i = 0; i < size; i++)
+		putc('\b');
+	for (i = 0; i < size; i++)
+		putc(' ');
+	for (i = 0; i < size; i++)
+		putc('\b');
+}
+#endif /* !defined(CONFIG_NAND_U_BOOT) &&  !defined(CONFIG_NAND_SPL) */
+
+inline void ppc4xx_ibm_ddr2_register_dump(void)
 {
 #if defined(DEBUG)
 	printf("\nPPC4xx IBM DDR2 Register Dump:\n");
diff --git a/cpu/ppc4xx/4xx_ibm_ddr2_autocalib.c b/cpu/ppc4xx/4xx_ibm_ddr2_autocalib.c
new file mode 100644
index 000000000..1e3e20df2
--- /dev/null
+++ b/cpu/ppc4xx/4xx_ibm_ddr2_autocalib.c
@@ -0,0 +1,1233 @@
+/*
+ * cpu/ppc4xx/4xx_ibm_ddr2_autocalib.c
+ * This SPD SDRAM detection code supports AMCC PPC44x cpu's with a
+ * DDR2 controller (non Denali Core). Those currently are:
+ *
+ * 405:		405EX
+ * 440/460:	440SP/440SPe/460EX/460GT/460SX
+ *
+ * (C) Copyright 2008 Applied Micro Circuits Corporation
+ * Adam Graham  <agraham@amcc.com>
+ *
+ * (C) Copyright 2007-2008
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * COPYRIGHT   AMCC   CORPORATION 2004
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+/* define DEBUG for debugging output (obviously ;-)) */
+#undef DEBUG
+
+#include <common.h>
+#include <ppc4xx.h>
+#include <asm/io.h>
+#include <asm/processor.h>
+
+#if defined(CONFIG_PPC4xx_DDR_AUTOCALIBRATION)
+
+/*
+ * Only compile the DDR auto-calibration code for NOR boot and
+ * not for NAND boot (NAND SPL and NAND U-Boot - NUB)
+ */
+#if !defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL)
+
+#define MAXBXCF			4
+#define SDRAM_RXBAS_SHIFT_1M	20
+
+#if defined(CONFIG_SYS_DECREMENT_PATTERNS)
+#define NUMMEMTESTS		24
+#else
+#define NUMMEMTESTS		8
+#endif /* CONFIG_SYS_DECREMENT_PATTERNS */
+#define NUMLOOPS		1	/* configure as you deem approporiate */
+#define NUMMEMWORDS		16
+
+/* Private Structure Definitions */
+
+struct autocal_regs {
+	u32 rffd;
+	u32 rqfd;
+};
+
+struct ddrautocal {
+	u32 rffd;
+	u32 rffd_min;
+	u32 rffd_max;
+	u32 rffd_size;
+	u32 rqfd;
+	u32 rqfd_size;
+	u32 rdcc;
+	u32 flags;
+};
+
+struct sdram_timing {
+	u32 wrdtr;
+	u32 clktr;
+};
+
+struct sdram_timing_clks {
+	u32 wrdtr;
+	u32 clktr;
+	u32 rdcc;
+	u32 flags;
+};
+
+struct autocal_clks {
+	struct sdram_timing_clks clocks;
+	struct ddrautocal	 autocal;
+};
+
+/*--------------------------------------------------------------------------+
+ * Prototypes
+ *--------------------------------------------------------------------------*/
+#if defined(CONFIG_PPC4xx_DDR_METHOD_A)
+static u32 DQS_calibration_methodA(struct ddrautocal *);
+static u32 program_DQS_calibration_methodA(struct ddrautocal *);
+#else
+static u32 DQS_calibration_methodB(struct ddrautocal *);
+static u32 program_DQS_calibration_methodB(struct ddrautocal *);
+#endif
+static int short_mem_test(u32 *);
+
+/*
+ * To provide an interface for board specific config values in this common
+ * DDR setup code, we implement he "weak" default functions here. They return
+ * the default value back to the caller.
+ *
+ * Please see include/configs/yucca.h for an example fora board specific
+ * implementation.
+ */
+
+#if !defined(CONFIG_SPD_EEPROM)
+u32 __ddr_wrdtr(u32 default_val)
+{
+	return default_val;
+}
+u32 ddr_wrdtr(u32) __attribute__((weak, alias("__ddr_wrdtr")));
+
+u32 __ddr_clktr(u32 default_val)
+{
+	return default_val;
+}
+u32 ddr_clktr(u32) __attribute__((weak, alias("__ddr_clktr")));
+
+/*
+ * Board-specific Platform code can reimplement spd_ddr_init_hang () if needed
+ */
+void __spd_ddr_init_hang(void)
+{
+	hang();
+}
+void
+spd_ddr_init_hang(void) __attribute__((weak, alias("__spd_ddr_init_hang")));
+#endif /* defined(CONFIG_SPD_EEPROM) */
+
+ulong __ddr_scan_option(ulong default_val)
+{
+	return default_val;
+}
+ulong ddr_scan_option(ulong) __attribute__((weak, alias("__ddr_scan_option")));
+
+static u32 *get_membase(int bxcr_num)
+{
+	ulong bxcf;
+	u32 *membase;
+
+#if defined(SDRAM_R0BAS)
+	/* BAS from Memory Queue rank reg. */
+	membase =
+	    (u32 *)(SDRAM_RXBAS_SDBA_DECODE(mfdcr_any(SDRAM_R0BAS+bxcr_num)));
+	bxcf = 0;	/* just to satisfy the compiler */
+#else
+	/* BAS from SDRAM_MBxCF mem rank reg. */
+	mfsdram(SDRAM_MB0CF + (bxcr_num<<2), bxcf);
+	membase = (u32 *)((bxcf & 0xfff80000) << 3);
+#endif
+
+	return membase;
+}
+
+static inline void ecc_clear_status_reg(void)
+{
+	mtsdram(SDRAM_ECCCR, 0xffffffff);
+#if defined(SDRAM_R0BAS)
+	mtdcr(SDRAM_ERRSTATLL, 0xffffffff);
+#endif
+}
+
+/*
+ * Reset and relock memory DLL after SDRAM_CLKTR change
+ */
+static inline void relock_memory_DLL(void)
+{
+	u32 reg;
+
+	mtsdram(SDRAM_MCOPT2, SDRAM_MCOPT2_IPTR_EXECUTE);
+
+	do {
+		mfsdram(SDRAM_MCSTAT, reg);
+	} while (!(reg & SDRAM_MCSTAT_MIC_COMP));
+
+	mfsdram(SDRAM_MCOPT2, reg);
+	mtsdram(SDRAM_MCOPT2, reg | SDRAM_MCOPT2_DCEN_ENABLE);
+}
+
+static int ecc_check_status_reg(void)
+{
+	u32 ecc_status;
+
+	/*
+	 * Compare suceeded, now check
+	 * if got ecc error. If got an
+	 * ecc error, then don't count
+	 * this as a passing value
+	 */
+	mfsdram(SDRAM_ECCCR, ecc_status);
+	if (ecc_status != 0x00000000) {
+		/* clear on error */
+		ecc_clear_status_reg();
+		/* ecc check failure */
+		return 0;
+	}
+	ecc_clear_status_reg();
+	sync();
+
+	return 1;
+}
+
+/* return 1 if passes, 0 if fail */
+static int short_mem_test(u32 *base_address)
+{
+	int i, j, l;
+	u32 ecc_mode = 0;
+
+	ulong test[NUMMEMTESTS][NUMMEMWORDS] = {
+	/* 0 */	{0x00000000, 0x00000000, 0xFFFFFFFF, 0xFFFFFFFF,
+		 0x00000000, 0x00000000, 0xFFFFFFFF, 0xFFFFFFFF,
+		 0x00000000, 0x00000000, 0xFFFFFFFF, 0xFFFFFFFF,
+		 0x00000000, 0x00000000, 0xFFFFFFFF, 0xFFFFFFFF},
+	/* 1 */	{0xFFFFFFFF, 0xFFFFFFFF, 0x00000000, 0x00000000,
+		 0xFFFFFFFF, 0xFFFFFFFF, 0x00000000, 0x00000000,
+		 0xFFFFFFFF, 0xFFFFFFFF, 0x00000000, 0x00000000,
+		 0xFFFFFFFF, 0xFFFFFFFF, 0x00000000, 0x00000000},
+	/* 2 */	{0xAAAAAAAA, 0xAAAAAAAA, 0x55555555, 0x55555555,
+		 0xAAAAAAAA, 0xAAAAAAAA, 0x55555555, 0x55555555,
+		 0xAAAAAAAA, 0xAAAAAAAA, 0x55555555, 0x55555555,
+		 0xAAAAAAAA, 0xAAAAAAAA, 0x55555555, 0x55555555},
+	/* 3 */	{0x55555555, 0x55555555, 0xAAAAAAAA, 0xAAAAAAAA,
+		 0x55555555, 0x55555555, 0xAAAAAAAA, 0xAAAAAAAA,
+		 0x55555555, 0x55555555, 0xAAAAAAAA, 0xAAAAAAAA,
+		 0x55555555, 0x55555555, 0xAAAAAAAA, 0xAAAAAAAA},
+	/* 4 */	{0xA5A5A5A5, 0xA5A5A5A5, 0x5A5A5A5A, 0x5A5A5A5A,
+		 0xA5A5A5A5, 0xA5A5A5A5, 0x5A5A5A5A, 0x5A5A5A5A,
+		 0xA5A5A5A5, 0xA5A5A5A5, 0x5A5A5A5A, 0x5A5A5A5A,
+		 0xA5A5A5A5, 0xA5A5A5A5, 0x5A5A5A5A, 0x5A5A5A5A},
+	/* 5 */	{0x5A5A5A5A, 0x5A5A5A5A, 0xA5A5A5A5, 0xA5A5A5A5,
+		 0x5A5A5A5A, 0x5A5A5A5A, 0xA5A5A5A5, 0xA5A5A5A5,
+		 0x5A5A5A5A, 0x5A5A5A5A, 0xA5A5A5A5, 0xA5A5A5A5,
+		 0x5A5A5A5A, 0x5A5A5A5A, 0xA5A5A5A5, 0xA5A5A5A5},
+	/* 6 */	{0xAA55AA55, 0xAA55AA55, 0x55AA55AA, 0x55AA55AA,
+		 0xAA55AA55, 0xAA55AA55, 0x55AA55AA, 0x55AA55AA,
+		 0xAA55AA55, 0xAA55AA55, 0x55AA55AA, 0x55AA55AA,
+		 0xAA55AA55, 0xAA55AA55, 0x55AA55AA, 0x55AA55AA},
+	/* 7 */	{0x55AA55AA, 0x55AA55AA, 0xAA55AA55, 0xAA55AA55,
+		 0x55AA55AA, 0x55AA55AA, 0xAA55AA55, 0xAA55AA55,
+		 0x55AA55AA, 0x55AA55AA, 0xAA55AA55, 0xAA55AA55,
+		 0x55AA55AA, 0x55AA55AA, 0xAA55AA55, 0xAA55AA55},
+
+#if defined(CONFIG_SYS_DECREMENT_PATTERNS)
+	/* 8 */	{0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
+		 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
+		 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
+		 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff},
+	/* 9 */	{0xfffefffe, 0xfffefffe, 0xfffefffe, 0xfffefffe,
+		 0xfffefffe, 0xfffefffe, 0xfffefffe, 0xfffefffe,
+		 0xfffefffe, 0xfffefffe, 0xfffefffe, 0xfffefffe,
+		 0xfffefffe, 0xfffefffe, 0xfffefffe, 0xfffefffe},
+	/* 10 */{0xfffdfffd, 0xfffdfffd, 0xfffdffff, 0xfffdfffd,
+		 0xfffdfffd, 0xfffdfffd, 0xfffdffff, 0xfffdfffd,
+		 0xfffdfffd, 0xfffdfffd, 0xfffdffff, 0xfffdfffd,
+		 0xfffdfffd, 0xfffdfffd, 0xfffdffff, 0xfffdfffd},
+	/* 11 */{0xfffcfffc, 0xfffcfffc, 0xfffcfffc, 0xfffcfffc,
+		 0xfffcfffc, 0xfffcfffc, 0xfffcfffc, 0xfffcfffc,
+		 0xfffcfffc, 0xfffcfffc, 0xfffcfffc, 0xfffcfffc,
+		 0xfffcfffc, 0xfffcfffc, 0xfffcfffc, 0xfffcfffc},
+	/* 12 */{0xfffbfffb, 0xfffffffb, 0xfffffffb, 0xfffffffb,
+		 0xfffbfffb, 0xfffffffb, 0xfffffffb, 0xfffffffb,
+		 0xfffbfffb, 0xfffffffb, 0xfffffffb, 0xfffffffb,
+		 0xfffbfffb, 0xfffffffb, 0xfffffffb, 0xfffffffb},
+	/* 13 */{0xfffafffa, 0xfffafffa, 0xfffffffa, 0xfffafffa,
+		 0xfffafffa, 0xfffafffa, 0xfffafffa, 0xfffafffa,
+		 0xfffafffa, 0xfffafffa, 0xfffafffa, 0xfffafffa,
+		 0xfffafffa, 0xfffafffa, 0xfffafffa, 0xfffafffa},
+	/* 14 */{0xfff9fff9, 0xfff9fff9, 0xfff9fff9, 0xfff9fff9,
+		 0xfff9fff9, 0xfff9fff9, 0xfff9fff9, 0xfff9fff9,
+		 0xfff9fff9, 0xfff9fff9, 0xfff9fff9, 0xfff9fff9,
+		 0xfff9fff9, 0xfff9fff9, 0xfff9fff9, 0xfff9fff9},
+	/* 15 */{0xfff8fff8, 0xfff8fff8, 0xfff8fff8, 0xfff8fff8,
+		 0xfff8fff8, 0xfff8fff8, 0xfff8fff8, 0xfff8fff8,
+		 0xfff8fff8, 0xfff8fff8, 0xfff8fff8, 0xfff8fff8,
+		 0xfff8fff8, 0xfff8fff8, 0xfff8fff8, 0xfff8fff8},
+	/* 16 */{0xfff7fff7, 0xfff7ffff, 0xfff7fff7, 0xfff7fff7,
+		 0xfff7fff7, 0xfff7ffff, 0xfff7fff7, 0xfff7fff7,
+		 0xfff7fff7, 0xfff7ffff, 0xfff7fff7, 0xfff7fff7,
+		 0xfff7ffff, 0xfff7ffff, 0xfff7fff7, 0xfff7fff7},
+	/* 17 */{0xfff6fff5, 0xfff6ffff, 0xfff6fff6, 0xfff6fff7,
+		 0xfff6fff5, 0xfff6ffff, 0xfff6fff6, 0xfff6fff7,
+		 0xfff6fff5, 0xfff6ffff, 0xfff6fff6, 0xfff6fff7,
+		 0xfff6fff5, 0xfff6ffff, 0xfff6fff6, 0xfff6fff7},
+	/* 18 */{0xfff5fff4, 0xfff5ffff, 0xfff5fff5, 0xfff5fff5,
+		 0xfff5fff4, 0xfff5ffff, 0xfff5fff5, 0xfff5fff5,
+		 0xfff5fff4, 0xfff5ffff, 0xfff5fff5, 0xfff5fff5,
+		 0xfff5fff4, 0xfff5ffff, 0xfff5fff5, 0xfff5fff5},
+	/* 19 */{0xfff4fff3, 0xfff4ffff, 0xfff4fff4, 0xfff4fff4,
+		 0xfff4fff3, 0xfff4ffff, 0xfff4fff4, 0xfff4fff4,
+		 0xfff4fff3, 0xfff4ffff, 0xfff4fff4, 0xfff4fff4,
+		 0xfff4fff3, 0xfff4ffff, 0xfff4fff4, 0xfff4fff4},
+	/* 20 */{0xfff3fff2, 0xfff3ffff, 0xfff3fff3, 0xfff3fff3,
+		 0xfff3fff2, 0xfff3ffff, 0xfff3fff3, 0xfff3fff3,
+		 0xfff3fff2, 0xfff3ffff, 0xfff3fff3, 0xfff3fff3,
+		 0xfff3fff2, 0xfff3ffff, 0xfff3fff3, 0xfff3fff3},
+	/* 21 */{0xfff2ffff, 0xfff2ffff, 0xfff2fff2, 0xfff2fff2,
+		 0xfff2ffff, 0xfff2ffff, 0xfff2fff2, 0xfff2fff2,
+		 0xfff2ffff, 0xfff2ffff, 0xfff2fff2, 0xfff2fff2,
+		 0xfff2ffff, 0xfff2ffff, 0xfff2fff2, 0xfff2fff2},
+	/* 22 */{0xfff1ffff, 0xfff1ffff, 0xfff1fff1, 0xfff1fff1,
+		 0xfff1ffff, 0xfff1ffff, 0xfff1fff1, 0xfff1fff1,
+		 0xfff1ffff, 0xfff1ffff, 0xfff1fff1, 0xfff1fff1,
+		 0xfff1ffff, 0xfff1ffff, 0xfff1fff1, 0xfff1fff1},
+	/* 23 */{0xfff0fff0, 0xfff0fff0, 0xfff0fff0, 0xfff0fff0,
+		 0xfff0fff0, 0xfff0fff0, 0xfff0fff0, 0xfff0fff0,
+		 0xfff0fff0, 0xfff0fff0, 0xfff0fff0, 0xfff0fff0,
+		 0xfff0fff0, 0xfff0fffe, 0xfff0fff0, 0xfff0fff0},
+#endif /* CONFIG_SYS_DECREMENT_PATTERNS */
+								 };
+
+	mfsdram(SDRAM_MCOPT1, ecc_mode);
+	if ((ecc_mode & SDRAM_MCOPT1_MCHK_CHK_REP) ==
+						SDRAM_MCOPT1_MCHK_CHK_REP) {
+		ecc_clear_status_reg();
+		sync();
+		ecc_mode = 1;
+	} else {
+		ecc_mode = 0;
+	}
+
+	/*
+	 * Run the short memory test.
+	 */
+	for (i = 0; i < NUMMEMTESTS; i++) {
+		for (j = 0; j < NUMMEMWORDS; j++) {
+			base_address[j] = test[i][j];
+			ppcDcbf((ulong)&(base_address[j]));
+		}
+		sync();
+		for (l = 0; l < NUMLOOPS; l++) {
+			for (j = 0; j < NUMMEMWORDS; j++) {
+				if (base_address[j] != test[i][j]) {
+					ppcDcbf((u32)&(base_address[j]));
+					return 0;
+				} else {
+					if (ecc_mode) {
+						if (!ecc_check_status_reg())
+							return 0;
+					}
+				}
+				ppcDcbf((u32)&(base_address[j]));
+			} /* for (j = 0; j < NUMMEMWORDS; j++) */
+			sync();
+		} /* for (l=0; l<NUMLOOPS; l++) */
+	}
+
+	return 1;
+}
+
+#if defined(CONFIG_PPC4xx_DDR_METHOD_A)
+/*-----------------------------------------------------------------------------+
+| program_DQS_calibration_methodA.
++-----------------------------------------------------------------------------*/
+static u32 program_DQS_calibration_methodA(struct ddrautocal *ddrcal)
+{
+	u32 pass_result = 0;
+
+#ifdef DEBUG
+	ulong temp;
+
+	mfsdram(SDRAM_RDCC, temp);
+	debug("<%s>SDRAM_RDCC=0x%08x\n", __func__, temp);
+#endif
+
+	pass_result = DQS_calibration_methodA(ddrcal);
+
+	return pass_result;
+}
+
+/*
+ * DQS_calibration_methodA()
+ *
+ * Autocalibration Method A
+ *
+ *  ARRAY [Entire DQS Range] DQS_Valid_Window ;    initialized to all zeros
+ *  ARRAY [Entire FDBK Range] FDBK_Valid_Window;   initialized to all zeros
+ *  MEMWRITE(addr, expected_data);
+ *  for (i = 0; i < Entire DQS Range; i++) {       RQDC.RQFD
+ *      for (j = 0; j < Entire FDBK Range; j++) {  RFDC.RFFD
+ *         MEMREAD(addr, actual_data);
+ *         if (actual_data == expected_data) {
+ *             DQS_Valid_Window[i] = 1;            RQDC.RQFD
+ *             FDBK_Valid_Window[i][j] = 1;        RFDC.RFFD
+ *         }
+ *      }
+ *  }
+ */
+static u32 DQS_calibration_methodA(struct ddrautocal *cal)
+{
+	ulong rfdc_reg;
+	ulong rffd;
+
+	ulong rqdc_reg;
+	ulong rqfd;
+
+	u32 *membase;
+	ulong bxcf;
+	int rqfd_average;
+	int bxcr_num;
+	int rffd_average;
+	int pass;
+	u32 passed = 0;
+
+	int in_window;
+	struct autocal_regs curr_win_min;
+	struct autocal_regs curr_win_max;
+	struct autocal_regs best_win_min;
+	struct autocal_regs best_win_max;
+	struct autocal_regs loop_win_min;
+	struct autocal_regs loop_win_max;
+
+#ifdef DEBUG
+	ulong temp;
+#endif
+	ulong rdcc;
+
+	char slash[] = "\\|/-\\|/-";
+	int loopi = 0;
+
+	/* start */
+	in_window = 0;
+
+	memset(&curr_win_min, 0, sizeof(curr_win_min));
+	memset(&curr_win_max, 0, sizeof(curr_win_max));
+	memset(&best_win_min, 0, sizeof(best_win_min));
+	memset(&best_win_max, 0, sizeof(best_win_max));
+	memset(&loop_win_min, 0, sizeof(loop_win_min));
+	memset(&loop_win_max, 0, sizeof(loop_win_max));
+
+	rdcc = 0;
+
+	/*
+	 * Program RDCC register
+	 * Read sample cycle auto-update enable
+	 */
+	mtsdram(SDRAM_RDCC, SDRAM_RDCC_RDSS_T1 | SDRAM_RDCC_RSAE_ENABLE);
+
+#ifdef DEBUG
+	mfsdram(SDRAM_RDCC, temp);
+	debug("<%s>SDRAM_RDCC=0x%x\n", __func__, temp);
+	mfsdram(SDRAM_RTSR, temp);
+	debug("<%s>SDRAM_RTSR=0x%x\n", __func__, temp);
+	mfsdram(SDRAM_FCSR, temp);
+	debug("<%s>SDRAM_FCSR=0x%x\n", __func__, temp);
+#endif
+
+	/*
+	 * Program RQDC register
+	 * Internal DQS delay mechanism enable
+	 */
+	mtsdram(SDRAM_RQDC,
+		SDRAM_RQDC_RQDE_ENABLE | SDRAM_RQDC_RQFD_ENCODE(0x00));
+
+#ifdef DEBUG
+	mfsdram(SDRAM_RQDC, temp);
+	debug("<%s>SDRAM_RQDC=0x%x\n", __func__, temp);
+#endif
+
+	/*
+	 * Program RFDC register
+	 * Set Feedback Fractional Oversample
+	 * Auto-detect read sample cycle enable
+	 */
+	mtsdram(SDRAM_RFDC, SDRAM_RFDC_ARSE_ENABLE |
+		SDRAM_RFDC_RFOS_ENCODE(0) | SDRAM_RFDC_RFFD_ENCODE(0));
+
+#ifdef DEBUG
+	mfsdram(SDRAM_RFDC, temp);
+	debug("<%s>SDRAM_RFDC=0x%x\n", __func__, temp);
+#endif
+
+	putc(' ');
+	for (rqfd = 0; rqfd <= SDRAM_RQDC_RQFD_MAX; rqfd++) {
+
+		mfsdram(SDRAM_RQDC, rqdc_reg);
+		rqdc_reg &= ~(SDRAM_RQDC_RQFD_MASK);
+		mtsdram(SDRAM_RQDC, rqdc_reg | SDRAM_RQDC_RQFD_ENCODE(rqfd));
+
+		putc('\b');
+		putc(slash[loopi++ % 8]);
+
+		curr_win_min.rffd = 0;
+		curr_win_max.rffd = 0;
+		in_window = 0;
+
+		for (rffd = 0, pass = 0; rffd <= SDRAM_RFDC_RFFD_MAX; rffd++) {
+			mfsdram(SDRAM_RFDC, rfdc_reg);
+			rfdc_reg &= ~(SDRAM_RFDC_RFFD_MASK);
+			mtsdram(SDRAM_RFDC,
+				    rfdc_reg | SDRAM_RFDC_RFFD_ENCODE(rffd));
+
+			for (bxcr_num = 0; bxcr_num < MAXBXCF; bxcr_num++) {
+				mfsdram(SDRAM_MB0CF + (bxcr_num<<2), bxcf);
+
+				/* Banks enabled */
+				if (bxcf & SDRAM_BXCF_M_BE_MASK) {
+					/* Bank is enabled */
+					membase = get_membase(bxcr_num);
+					pass = short_mem_test(membase);
+				} /* if bank enabled */
+			} /* for bxcr_num */
+
+			/* If this value passed update RFFD windows */
+			if (pass && !in_window) { /* at the start of window */
+				in_window = 1;
+				curr_win_min.rffd = curr_win_max.rffd = rffd;
+				curr_win_min.rqfd = curr_win_max.rqfd = rqfd;
+				mfsdram(SDRAM_RDCC, rdcc); /*record this value*/
+			} else if (!pass && in_window) { /* at end of window */
+				in_window = 0;
+			} else if (pass && in_window) { /* within the window */
+				curr_win_max.rffd = rffd;
+				curr_win_max.rqfd = rqfd;
+			}
+			/* else if (!pass && !in_window)
+				skip - no pass, not currently in a window */
+
+			if (in_window) {
+				if ((curr_win_max.rffd - curr_win_min.rffd) >
+				    (best_win_max.rffd - best_win_min.rffd)) {
+					best_win_min.rffd = curr_win_min.rffd;
+					best_win_max.rffd = curr_win_max.rffd;
+
+					best_win_min.rqfd = curr_win_min.rqfd;
+					best_win_max.rqfd = curr_win_max.rqfd;
+					cal->rdcc	  = rdcc;
+				}
+				passed = 1;
+			}
+		} /* RFDC.RFFD */
+
+		/*
+		 * save-off the best window results of the RFDC.RFFD
+		 * for this RQDC.RQFD setting
+		 */
+		/*
+		 * if (just ended RFDC.RFDC loop pass window) >
+		 *	(prior RFDC.RFFD loop pass window)
+		 */
+		if ((best_win_max.rffd - best_win_min.rffd) >
+		    (loop_win_max.rffd - loop_win_min.rffd)) {
+			loop_win_min.rffd = best_win_min.rffd;
+			loop_win_max.rffd = best_win_max.rffd;
+			loop_win_min.rqfd = rqfd;
+			loop_win_max.rqfd = rqfd;
+			debug("RQFD.min 0x%08x, RQFD.max 0x%08x, "
+			      "RFFD.min 0x%08x, RFFD.max 0x%08x\n",
+					loop_win_min.rqfd, loop_win_max.rqfd,
+					loop_win_min.rffd, loop_win_max.rffd);
+		}
+	} /* RQDC.RQFD */
+
+	putc('\b');
+
+	debug("\n");
+
+	if ((loop_win_min.rffd == 0) && (loop_win_max.rffd == 0) &&
+	    (best_win_min.rffd == 0) && (best_win_max.rffd == 0) &&
+	    (best_win_min.rqfd == 0) && (best_win_max.rqfd == 0)) {
+		passed = 0;
+	}
+
+	/*
+	 * Need to program RQDC before RFDC.
+	 */
+	debug("<%s> RQFD Min: 0x%x\n", __func__, loop_win_min.rqfd);
+	debug("<%s> RQFD Max: 0x%x\n", __func__, loop_win_max.rqfd);
+	rqfd_average = loop_win_max.rqfd;
+
+	if (rqfd_average < 0)
+		rqfd_average = 0;
+
+	if (rqfd_average > SDRAM_RQDC_RQFD_MAX)
+		rqfd_average = SDRAM_RQDC_RQFD_MAX;
+
+	debug("<%s> RFFD average: 0x%08x\n", __func__, rqfd_average);
+	mtsdram(SDRAM_RQDC, (rqdc_reg & ~SDRAM_RQDC_RQFD_MASK) |
+				SDRAM_RQDC_RQFD_ENCODE(rqfd_average));
+
+	debug("<%s> RFFD Min: 0x%08x\n", __func__, loop_win_min.rffd);
+	debug("<%s> RFFD Max: 0x%08x\n", __func__, loop_win_max.rffd);
+	rffd_average = ((loop_win_min.rffd + loop_win_max.rffd) / 2);
+
+	if (rffd_average < 0)
+		rffd_average = 0;
+
+	if (rffd_average > SDRAM_RFDC_RFFD_MAX)
+		rffd_average = SDRAM_RFDC_RFFD_MAX;
+
+	debug("<%s> RFFD average: 0x%08x\n", __func__, rffd_average);
+	mtsdram(SDRAM_RFDC, rfdc_reg | SDRAM_RFDC_RFFD_ENCODE(rffd_average));
+
+	/* if something passed, then return the size of the largest window */
+	if (passed != 0) {
+		passed		= loop_win_max.rffd - loop_win_min.rffd;
+		cal->rqfd	= rqfd_average;
+		cal->rffd	= rffd_average;
+		cal->rffd_min	= loop_win_min.rffd;
+		cal->rffd_max	= loop_win_max.rffd;
+	}
+
+	return (u32)passed;
+}
+
+#else	/* !defined(CONFIG_PPC4xx_DDR_METHOD_A) */
+
+/*-----------------------------------------------------------------------------+
+| program_DQS_calibration_methodB.
++-----------------------------------------------------------------------------*/
+static u32 program_DQS_calibration_methodB(struct ddrautocal *ddrcal)
+{
+	u32 pass_result = 0;
+
+#ifdef DEBUG
+	ulong temp;
+#endif
+
+	/*
+	 * Program RDCC register
+	 * Read sample cycle auto-update enable
+	 */
+	mtsdram(SDRAM_RDCC, SDRAM_RDCC_RDSS_T2 | SDRAM_RDCC_RSAE_ENABLE);
+
+#ifdef DEBUG
+	mfsdram(SDRAM_RDCC, temp);
+	debug("<%s>SDRAM_RDCC=0x%08x\n", __func__, temp);
+#endif
+
+	/*
+	 * Program RQDC register
+	 * Internal DQS delay mechanism enable
+	 */
+	mtsdram(SDRAM_RQDC,
+#if defined(CONFIG_DDR_RQDC_START_VAL)
+			SDRAM_RQDC_RQDE_ENABLE |
+			    SDRAM_RQDC_RQFD_ENCODE(CONFIG_DDR_RQDC_START_VAL));
+#else
+			SDRAM_RQDC_RQDE_ENABLE | SDRAM_RQDC_RQFD_ENCODE(0x38));
+#endif
+
+#ifdef DEBUG
+	mfsdram(SDRAM_RQDC, temp);
+	debug("<%s>SDRAM_RQDC=0x%08x\n", __func__, temp);
+#endif
+
+	/*
+	 * Program RFDC register
+	 * Set Feedback Fractional Oversample
+	 * Auto-detect read sample cycle enable
+	 */
+	mtsdram(SDRAM_RFDC,	SDRAM_RFDC_ARSE_ENABLE |
+				SDRAM_RFDC_RFOS_ENCODE(0) |
+				SDRAM_RFDC_RFFD_ENCODE(0));
+
+#ifdef DEBUG
+	mfsdram(SDRAM_RFDC, temp);
+	debug("<%s>SDRAM_RFDC=0x%08x\n", __func__, temp);
+#endif
+
+	pass_result = DQS_calibration_methodB(ddrcal);
+
+	return pass_result;
+}
+
+/*
+ * DQS_calibration_methodB()
+ *
+ * Autocalibration Method B
+ *
+ * ARRAY [Entire DQS Range] DQS_Valid_Window ;       initialized to all zeros
+ * ARRAY [Entire Feedback Range] FDBK_Valid_Window;  initialized to all zeros
+ * MEMWRITE(addr, expected_data);
+ * Initialialize the DQS delay to 80 degrees (MCIF0_RRQDC[RQFD]=0x38).
+ *
+ *  for (j = 0; j < Entire Feedback Range; j++) {
+ *      MEMREAD(addr, actual_data);
+ *       if (actual_data == expected_data) {
+ *           FDBK_Valid_Window[j] = 1;
+ *       }
+ * }
+ *
+ * Set MCIF0_RFDC[RFFD] to the middle of the FDBK_Valid_Window.
+ *
+ * for (i = 0; i < Entire DQS Range; i++) {
+ *     MEMREAD(addr, actual_data);
+ *     if (actual_data == expected_data) {
+ *         DQS_Valid_Window[i] = 1;
+ *      }
+ * }
+ *
+ * Set MCIF0_RRQDC[RQFD] to the middle of the DQS_Valid_Window.
+ */
+/*-----------------------------------------------------------------------------+
+| DQS_calibration_methodB.
++-----------------------------------------------------------------------------*/
+static u32 DQS_calibration_methodB(struct ddrautocal *cal)
+{
+	ulong rfdc_reg;
+	ulong rffd;
+
+	ulong rqdc_reg;
+	ulong rqfd;
+
+	ulong rdcc;
+
+	u32 *membase;
+	ulong bxcf;
+	int rqfd_average;
+	int bxcr_num;
+	int rffd_average;
+	int pass;
+	uint passed = 0;
+
+	int in_window;
+	u32 curr_win_min, curr_win_max;
+	u32 best_win_min, best_win_max;
+	u32 size = 0;
+
+	/*------------------------------------------------------------------
+	 | Test to determine the best read clock delay tuning bits.
+	 |
+	 | Before the DDR controller can be used, the read clock delay needs to
+	 | be set.  This is SDRAM_RQDC[RQFD] and SDRAM_RFDC[RFFD].
+	 | This value cannot be hardcoded into the program because it changes
+	 | depending on the board's setup and environment.
+	 | To do this, all delay values are tested to see if they
+	 | work or not.  By doing this, you get groups of fails with groups of
+	 | passing values.  The idea is to find the start and end of a passing
+	 | window and take the center of it to use as the read clock delay.
+	 |
+	 | A failure has to be seen first so that when we hit a pass, we know
+	 | that it is truely the start of the window.  If we get passing values
+	 | to start off with, we don't know if we are at the start of the window
+	 |
+	 | The code assumes that a failure will always be found.
+	 | If a failure is not found, there is no easy way to get the middle
+	 | of the passing window.  I guess we can pretty much pick any value
+	 | but some values will be better than others.  Since the lowest speed
+	 | we can clock the DDR interface at is 200 MHz (2x 100 MHz PLB speed),
+	 | from experimentation it is safe to say you will always have a failure
+	 +-----------------------------------------------------------------*/
+
+	debug("\n\n");
+
+	in_window = 0;
+	rdcc = 0;
+
+	curr_win_min = curr_win_max = 0;
+	best_win_min = best_win_max = 0;
+	for (rffd = 0; rffd <= SDRAM_RFDC_RFFD_MAX; rffd++) {
+		mfsdram(SDRAM_RFDC, rfdc_reg);
+		rfdc_reg &= ~(SDRAM_RFDC_RFFD_MASK);
+		mtsdram(SDRAM_RFDC, rfdc_reg | SDRAM_RFDC_RFFD_ENCODE(rffd));
+
+		pass = 1;
+		for (bxcr_num = 0; bxcr_num < MAXBXCF; bxcr_num++) {
+			mfsdram(SDRAM_MB0CF + (bxcr_num<<2), bxcf);
+
+			/* Banks enabled */
+			if (bxcf & SDRAM_BXCF_M_BE_MASK) {
+				/* Bank is enabled */
+				membase = get_membase(bxcr_num);
+				pass &= short_mem_test(membase);
+			} /* if bank enabled */
+		} /* for bxcf_num */
+
+		/* If this value passed */
+		if (pass && !in_window) {	/* start of passing window */
+			in_window = 1;
+			curr_win_min = curr_win_max = rffd;
+			mfsdram(SDRAM_RDCC, rdcc);	/* record this value */
+		} else if (!pass && in_window) {	/* end passing window */
+			in_window = 0;
+		} else if (pass && in_window) {	/* within the passing window */
+			curr_win_max = rffd;
+		}
+
+		if (in_window) {
+			if ((curr_win_max - curr_win_min) >
+			    (best_win_max - best_win_min)) {
+				best_win_min = curr_win_min;
+				best_win_max = curr_win_max;
+				cal->rdcc    = rdcc;
+			}
+			passed = 1;
+		}
+	} /* for rffd */
+
+	if ((best_win_min == 0) && (best_win_max == 0))
+		passed = 0;
+	else
+		size = best_win_max - best_win_min;
+
+	debug("RFFD Min: 0x%x\n", best_win_min);
+	debug("RFFD Max: 0x%x\n", best_win_max);
+	rffd_average = ((best_win_min + best_win_max) / 2);
+
+	cal->rffd_min = best_win_min;
+	cal->rffd_max = best_win_max;
+
+	if (rffd_average < 0)
+		rffd_average = 0;
+
+	if (rffd_average > SDRAM_RFDC_RFFD_MAX)
+		rffd_average = SDRAM_RFDC_RFFD_MAX;
+
+	mtsdram(SDRAM_RFDC, rfdc_reg | SDRAM_RFDC_RFFD_ENCODE(rffd_average));
+
+	rffd = rffd_average;
+	in_window = 0;
+
+	curr_win_min = curr_win_max = 0;
+	best_win_min = best_win_max = 0;
+	for (rqfd = 0; rqfd <= SDRAM_RQDC_RQFD_MAX; rqfd++) {
+		mfsdram(SDRAM_RQDC, rqdc_reg);
+		rqdc_reg &= ~(SDRAM_RQDC_RQFD_MASK);
+		mtsdram(SDRAM_RQDC, rqdc_reg | SDRAM_RQDC_RQFD_ENCODE(rqfd));
+
+		pass = 1;
+		for (bxcr_num = 0; bxcr_num < MAXBXCF; bxcr_num++) {
+
+			mfsdram(SDRAM_MB0CF + (bxcr_num<<2), bxcf);
+
+			/* Banks enabled */
+			if (bxcf & SDRAM_BXCF_M_BE_MASK) {
+				/* Bank is enabled */
+				membase = get_membase(bxcr_num);
+				pass &= short_mem_test(membase);
+			} /* if bank enabled */
+		} /* for bxcf_num */
+
+		/* If this value passed */
+		if (pass && !in_window) {
+			in_window = 1;
+			curr_win_min = curr_win_max = rqfd;
+		} else if (!pass && in_window) {
+			in_window = 0;
+		} else if (pass && in_window) {
+			curr_win_max = rqfd;
+		}
+
+		if (in_window) {
+			if ((curr_win_max - curr_win_min) >
+			    (best_win_max - best_win_min)) {
+				best_win_min = curr_win_min;
+				best_win_max = curr_win_max;
+			}
+			passed = 1;
+		}
+	} /* for rqfd */
+
+	if ((best_win_min == 0) && (best_win_max == 0))
+		passed = 0;
+
+	debug("RQFD Min: 0x%x\n", best_win_min);
+	debug("RQFD Max: 0x%x\n", best_win_max);
+	rqfd_average = ((best_win_min + best_win_max) / 2);
+
+	if (rqfd_average < 0)
+		rqfd_average = 0;
+
+	if (rqfd_average > SDRAM_RQDC_RQFD_MAX)
+		rqfd_average = SDRAM_RQDC_RQFD_MAX;
+
+	mtsdram(SDRAM_RQDC, (rqdc_reg & ~SDRAM_RQDC_RQFD_MASK) |
+					SDRAM_RQDC_RQFD_ENCODE(rqfd_average));
+
+	mfsdram(SDRAM_RQDC, rqdc_reg);
+	mfsdram(SDRAM_RFDC, rfdc_reg);
+
+	/*
+	 * Need to program RQDC before RFDC. The value is read above.
+	 * That is the reason why auto cal not work.
+	 * See, comments below.
+	 */
+	mtsdram(SDRAM_RQDC, rqdc_reg);
+	mtsdram(SDRAM_RFDC, rfdc_reg);
+
+	debug("RQDC: 0x%08X\n", rqdc_reg);
+	debug("RFDC: 0x%08X\n", rfdc_reg);
+
+	/* if something passed, then return the size of the largest window */
+	if (passed != 0) {
+		passed		= size;
+		cal->rqfd	= rqfd_average;
+		cal->rffd	= rffd_average;
+	}
+
+	return (uint)passed;
+}
+#endif /* defined(CONFIG_PPC4xx_DDR_METHOD_A) */
+
+/*
+ * Default table for DDR auto-calibration of all
+ * possible WRDTR and CLKTR values.
+ * Table format is:
+ *	 {SDRAM_WRDTR.[WDTR], SDRAM_CLKTR.[CKTR]}
+ *
+ * Table is terminated with {-1, -1} value pair.
+ *
+ * Board vendors can specify their own board specific subset of
+ * known working {SDRAM_WRDTR.[WDTR], SDRAM_CLKTR.[CKTR]} value
+ * pairs via a board defined ddr_scan_option() function.
+ */
+struct sdram_timing full_scan_options[] = {
+	{0, 0}, {0, 1}, {0, 2}, {0, 3},
+	{1, 0}, {1, 1}, {1, 2}, {1, 3},
+	{2, 0}, {2, 1}, {2, 2}, {2, 3},
+	{3, 0}, {3, 1}, {3, 2}, {3, 3},
+	{4, 0}, {4, 1}, {4, 2}, {4, 3},
+	{5, 0}, {5, 1}, {5, 2}, {5, 3},
+	{6, 0}, {6, 1}, {6, 2}, {6, 3},
+	{-1, -1}
+};
+
+/*---------------------------------------------------------------------------+
+| DQS_calibration.
++----------------------------------------------------------------------------*/
+u32 DQS_autocalibration(void)
+{
+	u32 wdtr;
+	u32 clkp;
+	u32 result = 0;
+	u32 best_result = 0;
+	u32 best_rdcc;
+	struct ddrautocal ddrcal;
+	struct autocal_clks tcal;
+	ulong rfdc_reg;
+	ulong rqdc_reg;
+	u32 val;
+	int verbose_lvl = 0;
+	char *str;
+	char slash[] = "\\|/-\\|/-";
+	int loopi = 0;
+	struct sdram_timing *scan_list;
+
+#if defined(DEBUG_PPC4xx_DDR_AUTOCALIBRATION)
+	int i;
+	char tmp[64];	/* long enough for environment variables */
+#endif
+
+	memset(&tcal, 0, sizeof(tcal));
+
+	ddr_scan_option((ulong)full_scan_options);
+
+	scan_list =
+	      (struct sdram_timing *)ddr_scan_option((ulong)full_scan_options);
+
+	mfsdram(SDRAM_MCOPT1, val);
+	if ((val & SDRAM_MCOPT1_MCHK_CHK_REP) == SDRAM_MCOPT1_MCHK_CHK_REP)
+		str = "ECC Auto calibration -";
+	else
+		str = "Auto calibration -";
+
+	puts(str);
+
+#if defined(DEBUG_PPC4xx_DDR_AUTOCALIBRATION)
+	i = getenv_r("autocalib", tmp, sizeof(tmp));
+	if (i < 0)
+		strcpy(tmp, CONFIG_AUTOCALIB);
+
+	if (strcmp(tmp, "final") == 0) {
+		/* display the final autocalibration results only */
+		verbose_lvl = 1;
+	} else if (strcmp(tmp, "loop") == 0) {
+		/* display summary autocalibration info per iteration */
+		verbose_lvl = 2;
+	} else if (strcmp(tmp, "display") == 0) {
+		/* display full debug autocalibration window info. */
+		verbose_lvl = 3;
+	}
+#endif /* (DEBUG_PPC4xx_DDR_AUTOCALIBRATION) */
+
+	best_rdcc = (SDRAM_RDCC_RDSS_T4 >> 30);
+
+	while ((scan_list->wrdtr != -1) && (scan_list->clktr != -1)) {
+		wdtr = scan_list->wrdtr;
+		clkp = scan_list->clktr;
+
+		mfsdram(SDRAM_WRDTR, val);
+		val &= ~(SDRAM_WRDTR_LLWP_MASK | SDRAM_WRDTR_WTR_MASK);
+		mtsdram(SDRAM_WRDTR, (val |
+			ddr_wrdtr(SDRAM_WRDTR_LLWP_1_CYC | (wdtr << 25))));
+
+		mtsdram(SDRAM_CLKTR, clkp << 30);
+
+		relock_memory_DLL();
+
+		putc('\b');
+		putc(slash[loopi++ % 8]);
+
+#ifdef DEBUG
+		debug("\n");
+		debug("*** --------------\n");
+		mfsdram(SDRAM_WRDTR, val);
+		debug("*** SDRAM_WRDTR set to 0x%08x\n", val);
+		mfsdram(SDRAM_CLKTR, val);
+		debug("*** SDRAM_CLKTR set to 0x%08x\n", val);
+#endif
+
+		debug("\n");
+		if (verbose_lvl > 2) {
+			printf("*** SDRAM_WRDTR (wdtr) set to %d\n", wdtr);
+			printf("*** SDRAM_CLKTR (clkp) set to %d\n", clkp);
+		}
+
+		memset(&ddrcal, 0, sizeof(ddrcal));
+
+		/*
+		 * DQS calibration.
+		 */
+		/*
+		 * program_DQS_calibration_method[A|B]() returns 0 if no
+		 * passing RFDC.[RFFD] window is found or returns the size
+		 * of the best passing window; in the case of a found passing
+		 * window, the ddrcal will contain the values of the best
+		 * window RQDC.[RQFD] and RFDC.[RFFD].
+		 */
+
+		/*
+		 * Call PPC4xx SDRAM DDR autocalibration methodA or methodB.
+		 * Default is methodB.
+		 * Defined the autocalibration method in the board specific
+		 * header file.
+		 * Please see include/configs/kilauea.h for an example for
+		 * a board specific implementation.
+		 */
+#if defined(CONFIG_PPC4xx_DDR_METHOD_A)
+		result = program_DQS_calibration_methodA(&ddrcal);
+#else
+		result = program_DQS_calibration_methodB(&ddrcal);
+#endif
+
+		sync();
+
+		/*
+		 * Clear potential errors resulting from auto-calibration.
+		 * If not done, then we could get an interrupt later on when
+		 * exceptions are enabled.
+		 */
+		set_mcsr(get_mcsr());
+
+		val = ddrcal.rdcc;	/* RDCC from the best passing window */
+
+		udelay(100);
+
+		if (verbose_lvl > 1) {
+			char *tstr;
+			switch ((val >> 30)) {
+			case 0:
+				if (result != 0)
+					tstr = "T1";
+				else
+					tstr = "N/A";
+				break;
+			case 1:
+				tstr = "T2";
+				break;
+			case 2:
+				tstr = "T3";
+				break;
+			case 3:
+				tstr = "T4";
+				break;
+			default:
+				tstr = "unknown";
+				break;
+			}
+			printf("** WRDTR(%d) CLKTR(%d), Wind (%d), best (%d), "
+			       "max-min(0x%04x)(0x%04x), RDCC: %s\n",
+				wdtr, clkp, result, best_result,
+				ddrcal.rffd_min, ddrcal.rffd_max, tstr);
+		}
+
+		/*
+		 * The DQS calibration "result" is either "0"
+		 * if no passing window was found, or is the
+		 * size of the RFFD passing window.
+		 */
+		if (result != 0) {
+			tcal.autocal.flags = 1;
+			debug("*** (%d)(%d) result passed window size: 0x%08x, "
+			      "rqfd = 0x%08x, rffd = 0x%08x, rdcc = 0x%08x\n",
+				wdtr, clkp, result, ddrcal.rqfd,
+				ddrcal.rffd, ddrcal.rdcc);
+			/*
+			 * Save the SDRAM_WRDTR and SDRAM_CLKTR
+			 * settings for the largest returned
+			 * RFFD passing window size.
+			 */
+			if (result > best_result) {
+				/*
+				 * want the lowest Read Sample Cycle Select
+				 */
+				val = (val & SDRAM_RDCC_RDSS_MASK) >> 30;
+				debug("*** (%d) (%d) current_rdcc, best_rdcc\n",
+							val, best_rdcc);
+				if (val <= best_rdcc) {
+					best_rdcc = val;
+					tcal.clocks.wrdtr = wdtr;
+					tcal.clocks.clktr = clkp;
+					tcal.clocks.rdcc = (val << 30);
+					tcal.autocal.rqfd = ddrcal.rqfd;
+					tcal.autocal.rffd = ddrcal.rffd;
+					best_result = result;
+
+					if (verbose_lvl > 2) {
+						printf("** (%d)(%d)  "
+						       "best result: 0x%04x\n",
+							wdtr, clkp,
+							best_result);
+						printf("** (%d)(%d)  "
+						       "best WRDTR: 0x%04x\n",
+							wdtr, clkp,
+							tcal.clocks.wrdtr);
+						printf("** (%d)(%d)  "
+						       "best CLKTR: 0x%04x\n",
+							wdtr, clkp,
+							tcal.clocks.clktr);
+						printf("** (%d)(%d)  "
+						       "best RQDC: 0x%04x\n",
+							wdtr, clkp,
+							tcal.autocal.rqfd);
+						printf("** (%d)(%d)  "
+						       "best RFDC: 0x%04x\n",
+							wdtr, clkp,
+							tcal.autocal.rffd);
+						printf("** (%d)(%d)  "
+						       "best RDCC: 0x%08x\n",
+							wdtr, clkp,
+							(u32)tcal.clocks.rdcc);
+						mfsdram(SDRAM_RTSR, val);
+						printf("** (%d)(%d)  best "
+						       "loop RTSR: 0x%08x\n",
+							wdtr, clkp, val);
+						mfsdram(SDRAM_FCSR, val);
+						printf("** (%d)(%d)  best "
+						       "loop FCSR: 0x%08x\n",
+							wdtr, clkp, val);
+					}
+				} /* if (val <= best_rdcc) */
+			} /* if (result >= best_result) */
+		} /* if (result != 0) */
+		scan_list++;
+	} /* while ((scan_list->wrdtr != -1) && (scan_list->clktr != -1)) */
+
+	if (tcal.autocal.flags == 1) {
+		if (verbose_lvl > 0) {
+			printf("*** --------------\n");
+			printf("*** best_result window size: %d\n",
+							best_result);
+			printf("*** best_result WRDTR: 0x%04x\n",
+							tcal.clocks.wrdtr);
+			printf("*** best_result CLKTR: 0x%04x\n",
+							tcal.clocks.clktr);
+			printf("*** best_result RQFD: 0x%04x\n",
+							tcal.autocal.rqfd);
+			printf("*** best_result RFFD: 0x%04x\n",
+							tcal.autocal.rffd);
+			printf("*** best_result RDCC: 0x%04x\n",
+							tcal.clocks.rdcc);
+			printf("*** --------------\n");
+			printf("\n");
+		}
+
+		/*
+		 * if got best passing result window, then lock in the
+		 * best CLKTR, WRDTR, RQFD, and RFFD values
+		 */
+		mfsdram(SDRAM_WRDTR, val);
+		mtsdram(SDRAM_WRDTR, (val &
+		    ~(SDRAM_WRDTR_LLWP_MASK | SDRAM_WRDTR_WTR_MASK)) |
+		    ddr_wrdtr(SDRAM_WRDTR_LLWP_1_CYC |
+					(tcal.clocks.wrdtr << 25)));
+
+		mtsdram(SDRAM_CLKTR, tcal.clocks.clktr << 30);
+
+		relock_memory_DLL();
+
+		mfsdram(SDRAM_RQDC, rqdc_reg);
+		rqdc_reg &= ~(SDRAM_RQDC_RQFD_MASK);
+		mtsdram(SDRAM_RQDC, rqdc_reg |
+				SDRAM_RQDC_RQFD_ENCODE(tcal.autocal.rqfd));
+
+		mfsdram(SDRAM_RQDC, rqdc_reg);
+		debug("*** best_result: read value SDRAM_RQDC 0x%08x\n",
+				rqdc_reg);
+
+		mfsdram(SDRAM_RFDC, rfdc_reg);
+		rfdc_reg &= ~(SDRAM_RFDC_RFFD_MASK);
+		mtsdram(SDRAM_RFDC, rfdc_reg |
+				SDRAM_RFDC_RFFD_ENCODE(tcal.autocal.rffd));
+
+		mfsdram(SDRAM_RFDC, rfdc_reg);
+		debug("*** best_result: read value SDRAM_RFDC 0x%08x\n",
+				rfdc_reg);
+		mfsdram(SDRAM_RDCC, val);
+		debug("***  SDRAM_RDCC 0x%08x\n", val);
+	} else {
+		/*
+		 * no valid windows were found
+		 */
+		printf("DQS memory calibration window can not be determined, "
+		       "terminating u-boot.\n");
+		ppc4xx_ibm_ddr2_register_dump();
+		spd_ddr_init_hang();
+	}
+
+	blank_string(strlen(str));
+
+	return 0;
+}
+#else /* defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_NAND_SPL) */
+u32 DQS_autocalibration(void)
+{
+	return 0;
+}
+#endif /* !defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL) */
+#endif /* defined(CONFIG_PPC4xx_DDR_AUTOCALIBRATION) */
diff --git a/cpu/ppc4xx/4xx_pci.c b/cpu/ppc4xx/4xx_pci.c
index c28c7ac86..e8871fc45 100644
--- a/cpu/ppc4xx/4xx_pci.c
+++ b/cpu/ppc4xx/4xx_pci.c
@@ -108,12 +108,12 @@ void pci_405gp_init(struct pci_controller *hose)
 	bd_t *bd = gd->bd;
 
 	unsigned short temp_short;
-	unsigned long ptmpcila[2] = {CFG_PCI_PTM1PCI, CFG_PCI_PTM2PCI};
+	unsigned long ptmpcila[2] = {CONFIG_SYS_PCI_PTM1PCI, CONFIG_SYS_PCI_PTM2PCI};
 #if defined(CONFIG_CPCI405) || defined(CONFIG_PMC405)
 	char *ptmla_str, *ptmms_str;
 #endif
-	unsigned long ptmla[2]    = {CFG_PCI_PTM1LA, CFG_PCI_PTM2LA};
-	unsigned long ptmms[2]    = {CFG_PCI_PTM1MS, CFG_PCI_PTM2MS};
+	unsigned long ptmla[2]    = {CONFIG_SYS_PCI_PTM1LA, CONFIG_SYS_PCI_PTM2LA};
+	unsigned long ptmms[2]    = {CONFIG_SYS_PCI_PTM1MS, CONFIG_SYS_PCI_PTM2MS};
 #if defined(CONFIG_PIP405) || defined (CONFIG_MIP405)
 	unsigned long pmmla[3]    = {0x80000000, 0xA0000000, 0};
 	unsigned long pmmma[3]    = {0xE0000001, 0xE0000001, 0};
@@ -268,25 +268,25 @@ void pci_405gp_init(struct pci_controller *hose)
 	/*
 	 * Insert Subsystem Vendor and Device ID
 	 */
-	pci_write_config_word(PCIDEVID_405GP, PCI_SUBSYSTEM_VENDOR_ID, CFG_PCI_SUBSYS_VENDORID);
+	pci_write_config_word(PCIDEVID_405GP, PCI_SUBSYSTEM_VENDOR_ID, CONFIG_SYS_PCI_SUBSYS_VENDORID);
 #ifdef CONFIG_CPCI405
 	if (mfdcr(strap) & PSR_PCI_ARBIT_EN)
-		pci_write_config_word(PCIDEVID_405GP, PCI_SUBSYSTEM_ID, CFG_PCI_SUBSYS_DEVICEID);
+		pci_write_config_word(PCIDEVID_405GP, PCI_SUBSYSTEM_ID, CONFIG_SYS_PCI_SUBSYS_DEVICEID);
 	else
-		pci_write_config_word(PCIDEVID_405GP, PCI_SUBSYSTEM_ID, CFG_PCI_SUBSYS_DEVICEID2);
+		pci_write_config_word(PCIDEVID_405GP, PCI_SUBSYSTEM_ID, CONFIG_SYS_PCI_SUBSYS_DEVICEID2);
 #else
-	pci_write_config_word(PCIDEVID_405GP, PCI_SUBSYSTEM_ID, CFG_PCI_SUBSYS_DEVICEID);
+	pci_write_config_word(PCIDEVID_405GP, PCI_SUBSYSTEM_ID, CONFIG_SYS_PCI_SUBSYS_DEVICEID);
 #endif
 
 	/*
 	 * Insert Class-code
 	 */
-#ifdef CFG_PCI_CLASSCODE
-	pci_write_config_word(PCIDEVID_405GP, PCI_CLASS_SUB_CODE, CFG_PCI_CLASSCODE);
-#endif /* CFG_PCI_CLASSCODE */
+#ifdef CONFIG_SYS_PCI_CLASSCODE
+	pci_write_config_word(PCIDEVID_405GP, PCI_CLASS_SUB_CODE, CONFIG_SYS_PCI_CLASSCODE);
+#endif /* CONFIG_SYS_PCI_CLASSCODE */
 
 	/*--------------------------------------------------------------------------+
-	 * If PCI speed = 66Mhz, set 66Mhz capable bit.
+	 * If PCI speed = 66MHz, set 66MHz capable bit.
 	 *--------------------------------------------------------------------------*/
 	if (bd->bi_pci_busfreq >= 66000000) {
 		pci_read_config_word(PCIDEVID_405GP, PCI_STATUS, &temp_short);
@@ -405,8 +405,8 @@ void pci_405gp_setup_vga(struct pci_controller *hose, pci_dev_t dev,
  */
 static struct pci_config_table pci_405gp_config_table[] = {
 /*if VendID is 0 it terminates the table search (ie Walnut)*/
-#ifdef CFG_PCI_SUBSYS_VENDORID
-	{CFG_PCI_SUBSYS_VENDORID, PCI_ANY_ID, PCI_CLASS_BRIDGE_HOST,
+#ifdef CONFIG_SYS_PCI_SUBSYS_VENDORID
+	{CONFIG_SYS_PCI_SUBSYS_VENDORID, PCI_ANY_ID, PCI_CLASS_BRIDGE_HOST,
 	 PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, pci_405gp_setup_bridge},
 #endif
 	{PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA,
@@ -488,10 +488,10 @@ int pci_440_init (struct pci_controller *hose)
 
 	/* PCI memory space */
 	pci_set_region(hose->regions + reg_num++,
-		       CFG_PCI_TARGBASE,
-		       CFG_PCI_MEMBASE,
-#ifdef CFG_PCI_MEMSIZE
-		       CFG_PCI_MEMSIZE,
+		       CONFIG_SYS_PCI_TARGBASE,
+		       CONFIG_SYS_PCI_MEMBASE,
+#ifdef CONFIG_SYS_PCI_MEMSIZE
+		       CONFIG_SYS_PCI_MEMSIZE,
 #else
 		       0x10000000,
 #endif
@@ -523,11 +523,11 @@ int pci_440_init (struct pci_controller *hose)
 	/*--------------------------------------------------------------------------+
 	 * PCI target init
 	 *--------------------------------------------------------------------------*/
-#if defined(CFG_PCI_TARGET_INIT)
+#if defined(CONFIG_SYS_PCI_TARGET_INIT)
 	pci_target_init(hose);                /* Let board setup pci target */
 #else
-	out16r( PCIX0_SBSYSVID, CFG_PCI_SUBSYS_VENDORID );
-	out16r( PCIX0_SBSYSID, CFG_PCI_SUBSYS_ID );
+	out16r( PCIX0_SBSYSVID, CONFIG_SYS_PCI_SUBSYS_VENDORID );
+	out16r( PCIX0_SBSYSID, CONFIG_SYS_PCI_SUBSYS_ID );
 	out16r( PCIX0_CLS, 0x00060000 ); /* Bridge, host bridge */
 #endif
 
@@ -542,9 +542,9 @@ int pci_440_init (struct pci_controller *hose)
 
 	/*--------------------------------------------------------------------------+
 	 * PCI master init: default is one 256MB region for PCI memory:
-	 * 0x3_00000000 - 0x3_0FFFFFFF  ==> CFG_PCI_MEMBASE
+	 * 0x3_00000000 - 0x3_0FFFFFFF  ==> CONFIG_SYS_PCI_MEMBASE
 	 *--------------------------------------------------------------------------*/
-#if defined(CFG_PCI_MASTER_INIT)
+#if defined(CONFIG_SYS_PCI_MASTER_INIT)
 	pci_master_init(hose);          /* Let board setup pci master */
 #else
 	out32r( PCIX0_POM0SA, 0 ); /* disable */
@@ -558,7 +558,7 @@ int pci_440_init (struct pci_controller *hose)
 	out32r( PCIX0_POM0LAL, 0x00000000 );
 	out32r( PCIX0_POM0LAH, 0x00000003 );
 #endif
-	out32r( PCIX0_POM0PCIAL, CFG_PCI_MEMBASE );
+	out32r( PCIX0_POM0PCIAL, CONFIG_SYS_PCI_MEMBASE );
 	out32r( PCIX0_POM0PCIAH, 0x00000000 );
 	out32r( PCIX0_POM0SA, 0xf0000001 ); /* 256MB, enabled */
 	out32r( PCIX0_STS, in32r( PCIX0_STS ) & ~0x0000fff8 );
diff --git a/cpu/ppc4xx/4xx_pcie.c b/cpu/ppc4xx/4xx_pcie.c
index 0aadc06a9..fd40d8abd 100644
--- a/cpu/ppc4xx/4xx_pcie.c
+++ b/cpu/ppc4xx/4xx_pcie.c
@@ -49,12 +49,12 @@ enum {
 
 static int validate_endpoint(struct pci_controller *hose)
 {
-	if (hose->cfg_data == (u8 *)CFG_PCIE0_CFGBASE)
+	if (hose->cfg_data == (u8 *)CONFIG_SYS_PCIE0_CFGBASE)
 		return (is_end_point(0));
-	else if (hose->cfg_data == (u8 *)CFG_PCIE1_CFGBASE)
+	else if (hose->cfg_data == (u8 *)CONFIG_SYS_PCIE1_CFGBASE)
 		return (is_end_point(1));
-#if CFG_PCIE_NR_PORTS > 2
-	else if (hose->cfg_data == (u8 *)CFG_PCIE2_CFGBASE)
+#if CONFIG_SYS_PCIE_NR_PORTS > 2
+	else if (hose->cfg_data == (u8 *)CONFIG_SYS_PCIE2_CFGBASE)
 		return (is_end_point(2));
 #endif
 
@@ -67,13 +67,13 @@ static u8* pcie_get_base(struct pci_controller *hose, unsigned int devfn)
 
 	/* use local configuration space for the first bus */
 	if (PCI_BUS(devfn) == 0) {
-		if (hose->cfg_data == (u8*)CFG_PCIE0_CFGBASE)
-			base = (u8*)CFG_PCIE0_XCFGBASE;
-		if (hose->cfg_data == (u8*)CFG_PCIE1_CFGBASE)
-			base = (u8*)CFG_PCIE1_XCFGBASE;
-#if CFG_PCIE_NR_PORTS > 2
-		if (hose->cfg_data == (u8*)CFG_PCIE2_CFGBASE)
-			base = (u8*)CFG_PCIE2_XCFGBASE;
+		if (hose->cfg_data == (u8*)CONFIG_SYS_PCIE0_CFGBASE)
+			base = (u8*)CONFIG_SYS_PCIE0_XCFGBASE;
+		if (hose->cfg_data == (u8*)CONFIG_SYS_PCIE1_CFGBASE)
+			base = (u8*)CONFIG_SYS_PCIE1_XCFGBASE;
+#if CONFIG_SYS_PCIE_NR_PORTS > 2
+		if (hose->cfg_data == (u8*)CONFIG_SYS_PCIE2_CFGBASE)
+			base = (u8*)CONFIG_SYS_PCIE2_XCFGBASE;
 #endif
 	}
 
@@ -86,7 +86,7 @@ static void pcie_dmer_disable(void)
 		mfdcr (DCRN_PEGPL_CFG(DCRN_PCIE0_BASE)) | GPL_DMER_MASK_DISA);
 	mtdcr (DCRN_PEGPL_CFG(DCRN_PCIE1_BASE),
 		mfdcr (DCRN_PEGPL_CFG(DCRN_PCIE1_BASE)) | GPL_DMER_MASK_DISA);
-#if CFG_PCIE_NR_PORTS > 2
+#if CONFIG_SYS_PCIE_NR_PORTS > 2
 	mtdcr (DCRN_PEGPL_CFG(DCRN_PCIE2_BASE),
 		mfdcr (DCRN_PEGPL_CFG(DCRN_PCIE2_BASE)) | GPL_DMER_MASK_DISA);
 #endif
@@ -98,7 +98,7 @@ static void pcie_dmer_enable(void)
 		mfdcr (DCRN_PEGPL_CFG(DCRN_PCIE0_BASE)) & ~GPL_DMER_MASK_DISA);
 	mtdcr (DCRN_PEGPL_CFG (DCRN_PCIE1_BASE),
 		mfdcr (DCRN_PEGPL_CFG(DCRN_PCIE1_BASE)) & ~GPL_DMER_MASK_DISA);
-#if CFG_PCIE_NR_PORTS > 2
+#if CONFIG_SYS_PCIE_NR_PORTS > 2
 	mtdcr (DCRN_PEGPL_CFG (DCRN_PCIE2_BASE),
 		mfdcr (DCRN_PEGPL_CFG(DCRN_PCIE2_BASE)) & ~GPL_DMER_MASK_DISA);
 #endif
@@ -286,7 +286,7 @@ static void ppc4xx_setup_utl(u32 port) {
 		mtdcr(DCRN_PEGPL_SPECIAL(PCIE2), 0x68782800);
 		break;
 	}
-	utl_base = (unsigned int *)(CFG_PCIE_BASE + 0x1000 * port);
+	utl_base = (unsigned int *)(CONFIG_SYS_PCIE_BASE + 0x1000 * port);
 
 	/*
 	 * Set buffer allocations and then assert VRB and TXE.
@@ -412,21 +412,21 @@ static void ppc4xx_setup_utl(u32 port)
 	 */
 	switch (port) {
 	case 0:
-		mtdcr(DCRN_PEGPL_REGBAH(PCIE0), U64_TO_U32_HIGH(CFG_PCIE0_UTLBASE));
-		mtdcr(DCRN_PEGPL_REGBAL(PCIE0), U64_TO_U32_LOW(CFG_PCIE0_UTLBASE));
+		mtdcr(DCRN_PEGPL_REGBAH(PCIE0), U64_TO_U32_HIGH(CONFIG_SYS_PCIE0_UTLBASE));
+		mtdcr(DCRN_PEGPL_REGBAL(PCIE0), U64_TO_U32_LOW(CONFIG_SYS_PCIE0_UTLBASE));
 		mtdcr(DCRN_PEGPL_REGMSK(PCIE0), 0x00007001);	/* BAM 11100000=4KB */
 		mtdcr(DCRN_PEGPL_SPECIAL(PCIE0), 0);
 		break;
 
 	case 1:
-		mtdcr(DCRN_PEGPL_REGBAH(PCIE1), U64_TO_U32_HIGH(CFG_PCIE0_UTLBASE));
-		mtdcr(DCRN_PEGPL_REGBAL(PCIE1), U64_TO_U32_LOW(CFG_PCIE0_UTLBASE)
+		mtdcr(DCRN_PEGPL_REGBAH(PCIE1), U64_TO_U32_HIGH(CONFIG_SYS_PCIE0_UTLBASE));
+		mtdcr(DCRN_PEGPL_REGBAL(PCIE1), U64_TO_U32_LOW(CONFIG_SYS_PCIE0_UTLBASE)
 			+ 0x1000);
 		mtdcr(DCRN_PEGPL_REGMSK(PCIE1), 0x00007001);	/* BAM 11100000=4KB */
 		mtdcr(DCRN_PEGPL_SPECIAL(PCIE1), 0);
 		break;
 	}
-	utl_base = (unsigned int *)(CFG_PCIE_BASE + 0x1000 * port);
+	utl_base = (unsigned int *)(CONFIG_SYS_PCIE_BASE + 0x1000 * port);
 
 	/*
 	 * Set buffer allocations and then assert VRB and TXE.
@@ -512,20 +512,20 @@ static void ppc4xx_setup_utl(u32 port)
 	switch (port) {
 	case 0:
 		mtdcr(DCRN_PEGPL_REGBAH(PCIE0), 0x00000000);
-		mtdcr(DCRN_PEGPL_REGBAL(PCIE0), CFG_PCIE0_UTLBASE);
+		mtdcr(DCRN_PEGPL_REGBAL(PCIE0), CONFIG_SYS_PCIE0_UTLBASE);
 		mtdcr(DCRN_PEGPL_REGMSK(PCIE0), 0x00007001); /* 4k region, valid */
 		mtdcr(DCRN_PEGPL_SPECIAL(PCIE0), 0);
 		break;
 
 	case 1:
 		mtdcr(DCRN_PEGPL_REGBAH(PCIE1), 0x00000000);
-		mtdcr(DCRN_PEGPL_REGBAL(PCIE1), CFG_PCIE1_UTLBASE);
+		mtdcr(DCRN_PEGPL_REGBAL(PCIE1), CONFIG_SYS_PCIE1_UTLBASE);
 		mtdcr(DCRN_PEGPL_REGMSK(PCIE1), 0x00007001); /* 4k region, valid */
 		mtdcr(DCRN_PEGPL_SPECIAL(PCIE1), 0);
 
 		break;
 	}
-	utl_base = (port==0) ? CFG_PCIE0_UTLBASE : CFG_PCIE1_UTLBASE;
+	utl_base = (port==0) ? CONFIG_SYS_PCIE0_UTLBASE : CONFIG_SYS_PCIE1_UTLBASE;
 
 	/*
 	 * Set buffer allocations and then assert VRB and TXE.
@@ -761,9 +761,9 @@ static inline u64 ppc4xx_get_cfgaddr(int port)
 {
 #if defined(CONFIG_405EX)
 	if (port == 0)
-		return (u64)CFG_PCIE0_CFGBASE;
+		return (u64)CONFIG_SYS_PCIE0_CFGBASE;
 	else
-		return (u64)CFG_PCIE1_CFGBASE;
+		return (u64)CONFIG_SYS_PCIE1_CFGBASE;
 #endif
 #if defined(CONFIG_440SPE)
 	if (ppc440spe_revB()) {
@@ -895,7 +895,7 @@ int ppc4xx_init_pcie_port(int port, int rootport)
 		mtdcr(DCRN_PEGPL_CFGBAL(PCIE1), low);
 		mtdcr(DCRN_PEGPL_CFGMSK(PCIE1), 0xe0000001); /* 512MB region, valid */
 		break;
-#if CFG_PCIE_NR_PORTS > 2
+#if CONFIG_SYS_PCIE_NR_PORTS > 2
 	case 2:
 		mtdcr(DCRN_PEGPL_CFGBAH(PCIE2), high);
 		mtdcr(DCRN_PEGPL_CFGBAL(PCIE2), low);
@@ -947,20 +947,20 @@ void ppc4xx_setup_pcie_rootpoint(struct pci_controller *hose, int port)
 
 	switch (port) {
 	case 0:
-		mbase = (u32 *)CFG_PCIE0_XCFGBASE;
-		rmbase = (u32 *)CFG_PCIE0_CFGBASE;
-		hose->cfg_data = (u8 *)CFG_PCIE0_CFGBASE;
+		mbase = (u32 *)CONFIG_SYS_PCIE0_XCFGBASE;
+		rmbase = (u32 *)CONFIG_SYS_PCIE0_CFGBASE;
+		hose->cfg_data = (u8 *)CONFIG_SYS_PCIE0_CFGBASE;
 		break;
 	case 1:
-		mbase = (u32 *)CFG_PCIE1_XCFGBASE;
-		rmbase = (u32 *)CFG_PCIE1_CFGBASE;
-		hose->cfg_data = (u8 *)CFG_PCIE1_CFGBASE;
+		mbase = (u32 *)CONFIG_SYS_PCIE1_XCFGBASE;
+		rmbase = (u32 *)CONFIG_SYS_PCIE1_CFGBASE;
+		hose->cfg_data = (u8 *)CONFIG_SYS_PCIE1_CFGBASE;
 		break;
-#if CFG_PCIE_NR_PORTS > 2
+#if CONFIG_SYS_PCIE_NR_PORTS > 2
 	case 2:
-		mbase = (u32 *)CFG_PCIE2_XCFGBASE;
-		rmbase = (u32 *)CFG_PCIE2_CFGBASE;
-		hose->cfg_data = (u8 *)CFG_PCIE2_CFGBASE;
+		mbase = (u32 *)CONFIG_SYS_PCIE2_XCFGBASE;
+		rmbase = (u32 *)CONFIG_SYS_PCIE2_CFGBASE;
+		hose->cfg_data = (u8 *)CONFIG_SYS_PCIE2_CFGBASE;
 		break;
 #endif
 	}
@@ -979,19 +979,19 @@ void ppc4xx_setup_pcie_rootpoint(struct pci_controller *hose, int port)
 	 * subregions and to enable the outbound translation.
 	 */
 	out_le32(mbase + PECFG_POM0LAH, 0x00000000);
-	out_le32(mbase + PECFG_POM0LAL, CFG_PCIE_MEMBASE +
-		 port * CFG_PCIE_MEMSIZE);
+	out_le32(mbase + PECFG_POM0LAL, CONFIG_SYS_PCIE_MEMBASE +
+		 port * CONFIG_SYS_PCIE_MEMSIZE);
 	debug("PECFG_POM0LA=%08x.%08x\n", in_le32(mbase + PECFG_POM0LAH),
 	      in_le32(mbase + PECFG_POM0LAL));
 
 	switch (port) {
 	case 0:
-		mtdcr(DCRN_PEGPL_OMR1BAH(PCIE0), CFG_PCIE_ADDR_HIGH);
-		mtdcr(DCRN_PEGPL_OMR1BAL(PCIE0), CFG_PCIE_MEMBASE +
-		      port * CFG_PCIE_MEMSIZE);
+		mtdcr(DCRN_PEGPL_OMR1BAH(PCIE0), CONFIG_SYS_PCIE_ADDR_HIGH);
+		mtdcr(DCRN_PEGPL_OMR1BAL(PCIE0), CONFIG_SYS_PCIE_MEMBASE +
+		      port * CONFIG_SYS_PCIE_MEMSIZE);
 		mtdcr(DCRN_PEGPL_OMR1MSKH(PCIE0), 0x7fffffff);
 		mtdcr(DCRN_PEGPL_OMR1MSKL(PCIE0),
-		      ~(CFG_PCIE_MEMSIZE - 1) | 3);
+		      ~(CONFIG_SYS_PCIE_MEMSIZE - 1) | 3);
 		debug("0:PEGPL_OMR1BA=%08x.%08x MSK=%08x.%08x\n",
 		      mfdcr(DCRN_PEGPL_OMR1BAH(PCIE0)),
 		      mfdcr(DCRN_PEGPL_OMR1BAL(PCIE0)),
@@ -999,26 +999,26 @@ void ppc4xx_setup_pcie_rootpoint(struct pci_controller *hose, int port)
 		      mfdcr(DCRN_PEGPL_OMR1MSKL(PCIE0)));
 		break;
 	case 1:
-		mtdcr(DCRN_PEGPL_OMR1BAH(PCIE1), CFG_PCIE_ADDR_HIGH);
-		mtdcr(DCRN_PEGPL_OMR1BAL(PCIE1), CFG_PCIE_MEMBASE +
-		      port * CFG_PCIE_MEMSIZE);
+		mtdcr(DCRN_PEGPL_OMR1BAH(PCIE1), CONFIG_SYS_PCIE_ADDR_HIGH);
+		mtdcr(DCRN_PEGPL_OMR1BAL(PCIE1), CONFIG_SYS_PCIE_MEMBASE +
+		      port * CONFIG_SYS_PCIE_MEMSIZE);
 		mtdcr(DCRN_PEGPL_OMR1MSKH(PCIE1), 0x7fffffff);
 		mtdcr(DCRN_PEGPL_OMR1MSKL(PCIE1),
-		      ~(CFG_PCIE_MEMSIZE - 1) | 3);
+		      ~(CONFIG_SYS_PCIE_MEMSIZE - 1) | 3);
 		debug("1:PEGPL_OMR1BA=%08x.%08x MSK=%08x.%08x\n",
 		      mfdcr(DCRN_PEGPL_OMR1BAH(PCIE1)),
 		      mfdcr(DCRN_PEGPL_OMR1BAL(PCIE1)),
 		      mfdcr(DCRN_PEGPL_OMR1MSKH(PCIE1)),
 		      mfdcr(DCRN_PEGPL_OMR1MSKL(PCIE1)));
 		break;
-#if CFG_PCIE_NR_PORTS > 2
+#if CONFIG_SYS_PCIE_NR_PORTS > 2
 	case 2:
-		mtdcr(DCRN_PEGPL_OMR1BAH(PCIE2), CFG_PCIE_ADDR_HIGH);
-		mtdcr(DCRN_PEGPL_OMR1BAL(PCIE2), CFG_PCIE_MEMBASE +
-		      port * CFG_PCIE_MEMSIZE);
+		mtdcr(DCRN_PEGPL_OMR1BAH(PCIE2), CONFIG_SYS_PCIE_ADDR_HIGH);
+		mtdcr(DCRN_PEGPL_OMR1BAL(PCIE2), CONFIG_SYS_PCIE_MEMBASE +
+		      port * CONFIG_SYS_PCIE_MEMSIZE);
 		mtdcr(DCRN_PEGPL_OMR1MSKH(PCIE2), 0x7fffffff);
 		mtdcr(DCRN_PEGPL_OMR1MSKL(PCIE2),
-		      ~(CFG_PCIE_MEMSIZE - 1) | 3);
+		      ~(CONFIG_SYS_PCIE_MEMSIZE - 1) | 3);
 		debug("2:PEGPL_OMR1BA=%08x.%08x MSK=%08x.%08x\n",
 		      mfdcr(DCRN_PEGPL_OMR1BAH(PCIE2)),
 		      mfdcr(DCRN_PEGPL_OMR1BAL(PCIE2)),
@@ -1072,17 +1072,17 @@ int ppc4xx_setup_pcie_endpoint(struct pci_controller *hose, int port)
 
 	switch (port) {
 	case 0:
-		mbase = (u32 *)CFG_PCIE0_XCFGBASE;
-		hose->cfg_data = (u8 *)CFG_PCIE0_CFGBASE;
+		mbase = (u32 *)CONFIG_SYS_PCIE0_XCFGBASE;
+		hose->cfg_data = (u8 *)CONFIG_SYS_PCIE0_CFGBASE;
 		break;
 	case 1:
-		mbase = (u32 *)CFG_PCIE1_XCFGBASE;
-		hose->cfg_data = (u8 *)CFG_PCIE1_CFGBASE;
+		mbase = (u32 *)CONFIG_SYS_PCIE1_XCFGBASE;
+		hose->cfg_data = (u8 *)CONFIG_SYS_PCIE1_CFGBASE;
 		break;
-#if defined(CFG_PCIE2_CFGBASE)
+#if defined(CONFIG_SYS_PCIE2_CFGBASE)
 	case 2:
-		mbase = (u32 *)CFG_PCIE2_XCFGBASE;
-		hose->cfg_data = (u8 *)CFG_PCIE2_CFGBASE;
+		mbase = (u32 *)CONFIG_SYS_PCIE2_XCFGBASE;
+		hose->cfg_data = (u8 *)CONFIG_SYS_PCIE2_CFGBASE;
 		break;
 #endif
 	}
@@ -1098,29 +1098,29 @@ int ppc4xx_setup_pcie_endpoint(struct pci_controller *hose, int port)
 
 	switch (port) {
 	case 0:
-		mtdcr(DCRN_PEGPL_OMR1BAH(PCIE0), CFG_PCIE_ADDR_HIGH);
-		mtdcr(DCRN_PEGPL_OMR1BAL(PCIE0), CFG_PCIE_MEMBASE +
-		      port * CFG_PCIE_MEMSIZE);
+		mtdcr(DCRN_PEGPL_OMR1BAH(PCIE0), CONFIG_SYS_PCIE_ADDR_HIGH);
+		mtdcr(DCRN_PEGPL_OMR1BAL(PCIE0), CONFIG_SYS_PCIE_MEMBASE +
+		      port * CONFIG_SYS_PCIE_MEMSIZE);
 		mtdcr(DCRN_PEGPL_OMR1MSKH(PCIE0), 0x7fffffff);
 		mtdcr(DCRN_PEGPL_OMR1MSKL(PCIE0),
-		      ~(CFG_PCIE_MEMSIZE - 1) | 3);
+		      ~(CONFIG_SYS_PCIE_MEMSIZE - 1) | 3);
 		break;
 	case 1:
-		mtdcr(DCRN_PEGPL_OMR1BAH(PCIE1), CFG_PCIE_ADDR_HIGH);
-		mtdcr(DCRN_PEGPL_OMR1BAL(PCIE1), CFG_PCIE_MEMBASE +
-		      port * CFG_PCIE_MEMSIZE);
+		mtdcr(DCRN_PEGPL_OMR1BAH(PCIE1), CONFIG_SYS_PCIE_ADDR_HIGH);
+		mtdcr(DCRN_PEGPL_OMR1BAL(PCIE1), CONFIG_SYS_PCIE_MEMBASE +
+		      port * CONFIG_SYS_PCIE_MEMSIZE);
 		mtdcr(DCRN_PEGPL_OMR1MSKH(PCIE1), 0x7fffffff);
 		mtdcr(DCRN_PEGPL_OMR1MSKL(PCIE1),
-		      ~(CFG_PCIE_MEMSIZE - 1) | 3);
+		      ~(CONFIG_SYS_PCIE_MEMSIZE - 1) | 3);
 		break;
-#if CFG_PCIE_NR_PORTS > 2
+#if CONFIG_SYS_PCIE_NR_PORTS > 2
 	case 2:
-		mtdcr(DCRN_PEGPL_OMR1BAH(PCIE2), CFG_PCIE_ADDR_HIGH);
-		mtdcr(DCRN_PEGPL_OMR1BAL(PCIE2), CFG_PCIE_MEMBASE +
-		      port * CFG_PCIE_MEMSIZE);
+		mtdcr(DCRN_PEGPL_OMR1BAH(PCIE2), CONFIG_SYS_PCIE_ADDR_HIGH);
+		mtdcr(DCRN_PEGPL_OMR1BAL(PCIE2), CONFIG_SYS_PCIE_MEMBASE +
+		      port * CONFIG_SYS_PCIE_MEMSIZE);
 		mtdcr(DCRN_PEGPL_OMR1MSKH(PCIE2), 0x7fffffff);
 		mtdcr(DCRN_PEGPL_OMR1MSKL(PCIE2),
-		      ~(CFG_PCIE_MEMSIZE - 1) | 3);
+		      ~(CONFIG_SYS_PCIE_MEMSIZE - 1) | 3);
 		break;
 #endif
 	}
@@ -1141,8 +1141,8 @@ int ppc4xx_setup_pcie_endpoint(struct pci_controller *hose, int port)
 	out_le32(mbase + PECFG_BAR2HMPA, 0);
 	out_le32(mbase + PECFG_BAR2LMPA, 0);
 
-	out_le32(mbase + PECFG_PIM0LAL, U64_TO_U32_LOW(CFG_PCIE_INBOUND_BASE));
-	out_le32(mbase + PECFG_PIM0LAH, U64_TO_U32_HIGH(CFG_PCIE_INBOUND_BASE));
+	out_le32(mbase + PECFG_PIM0LAL, U64_TO_U32_LOW(CONFIG_SYS_PCIE_INBOUND_BASE));
+	out_le32(mbase + PECFG_PIM0LAH, U64_TO_U32_HIGH(CONFIG_SYS_PCIE_INBOUND_BASE));
 	out_le32(mbase + PECFG_PIMEN, 0x1);
 
 	/* Enable I/O, Mem, and Busmaster cycles */
diff --git a/cpu/ppc4xx/4xx_uart.c b/cpu/ppc4xx/4xx_uart.c
index 766e58680..c106ac223 100644
--- a/cpu/ppc4xx/4xx_uart.c
+++ b/cpu/ppc4xx/4xx_uart.c
@@ -66,20 +66,20 @@ DECLARE_GLOBAL_DATA_PTR;
 #if defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
     defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
     defined(CONFIG_460EX) || defined(CONFIG_460GT)
-#define UART0_BASE	(CFG_PERIPHERAL_BASE + 0x00000300)
-#define UART1_BASE	(CFG_PERIPHERAL_BASE + 0x00000400)
+#define UART0_BASE	(CONFIG_SYS_PERIPHERAL_BASE + 0x00000300)
+#define UART1_BASE	(CONFIG_SYS_PERIPHERAL_BASE + 0x00000400)
 #else
-#define UART0_BASE	(CFG_PERIPHERAL_BASE + 0x00000200)
-#define UART1_BASE	(CFG_PERIPHERAL_BASE + 0x00000300)
+#define UART0_BASE	(CONFIG_SYS_PERIPHERAL_BASE + 0x00000200)
+#define UART1_BASE	(CONFIG_SYS_PERIPHERAL_BASE + 0x00000300)
 #endif
 
 #if defined(CONFIG_440SP) || defined(CONFIG_440SPE)
-#define UART2_BASE	(CFG_PERIPHERAL_BASE + 0x00000600)
+#define UART2_BASE	(CONFIG_SYS_PERIPHERAL_BASE + 0x00000600)
 #endif
 
 #if defined(CONFIG_460EX) || defined(CONFIG_460GT)
-#define UART2_BASE	(CFG_PERIPHERAL_BASE + 0x00000500)
-#define UART3_BASE	(CFG_PERIPHERAL_BASE + 0x00000600)
+#define UART2_BASE	(CONFIG_SYS_PERIPHERAL_BASE + 0x00000500)
+#define UART3_BASE	(CONFIG_SYS_PERIPHERAL_BASE + 0x00000600)
 #endif
 
 #if defined(CONFIG_440GP)
@@ -147,7 +147,7 @@ DECLARE_GLOBAL_DATA_PTR;
 #define ACTING_UART1_BASE	UART1_BASE
 #endif
 
-#if defined(CONFIG_405EP) && defined(CFG_EXT_SERIAL_CLOCK)
+#if defined(CONFIG_405EP) && defined(CONFIG_SYS_EXT_SERIAL_CLOCK)
 #error "External serial clock not supported on AMCC PPC405EP!"
 #endif
 
@@ -199,8 +199,8 @@ static void serial_init_common(u32 base, u32 udiv, u16 bdiv)
 	/* Correct UART frequency in bd-info struct now that
 	 * the UART divisor is available
 	 */
-#ifdef CFG_EXT_SERIAL_CLOCK
-	gd->uart_clk = CFG_EXT_SERIAL_CLOCK;
+#ifdef CONFIG_SYS_EXT_SERIAL_CLOCK
+	gd->uart_clk = CONFIG_SYS_EXT_SERIAL_CLOCK;
 #else
 	gd->uart_clk = sys_info.freqUART / udiv;
 #endif
@@ -218,7 +218,7 @@ static void serial_init_common(u32 base, u32 udiv, u16 bdiv)
 }
 
 #if (defined(CONFIG_440) || defined(CONFIG_405EX)) &&	\
-    !defined(CFG_EXT_SERIAL_CLOCK)
+    !defined(CONFIG_SYS_EXT_SERIAL_CLOCK)
 static void serial_divs (int baudrate, unsigned long *pudiv,
 			 unsigned short *pbdiv)
 {
@@ -315,7 +315,7 @@ static void serial_divs (int baudrate, unsigned long *pudiv,
 	mtcpr(cprperd0, reg);
 	*pbdiv = div / udiv;
 }
-#endif /* defined(CONFIG_440) && !defined(CFG_EXT_SERIAL_CLK) */
+#endif /* defined(CONFIG_440) && !defined(CONFIG_SYS_EXT_SERIAL_CLK) */
 
 /*
  * Minimal serial functions needed to use one of the SMC ports
@@ -328,18 +328,18 @@ int serial_init_dev(unsigned long base)
 	unsigned long reg;
 	unsigned long udiv;
 	unsigned short bdiv;
-#ifdef CFG_EXT_SERIAL_CLOCK
+#ifdef CONFIG_SYS_EXT_SERIAL_CLOCK
 	unsigned long tmp;
 #endif
 
 	MFREG(UART0_SDR, reg);
 	reg &= ~CR0_MASK;
 
-#ifdef CFG_EXT_SERIAL_CLOCK
+#ifdef CONFIG_SYS_EXT_SERIAL_CLOCK
 	reg |= CR0_EXTCLK_ENA;
 	udiv = 1;
 	tmp  = gd->baudrate * 16;
-	bdiv = (CFG_EXT_SERIAL_CLOCK + tmp / 2) / tmp;
+	bdiv = (CONFIG_SYS_EXT_SERIAL_CLOCK + tmp / 2) / tmp;
 #else
 	/* For 440, the cpu clock is on divider chain A, UART on divider
 	 * chain B ... so cpu clock is irrelevant. Get the "optimized"
@@ -384,11 +384,11 @@ int serial_init_dev (unsigned long base)
 	clk = tmp = 0;
 	mfsdr(UART0_SDR, reg);
 	reg &= ~CR0_MASK;
-#ifdef CFG_EXT_SERIAL_CLOCK
+#ifdef CONFIG_SYS_EXT_SERIAL_CLOCK
 	reg |= CR0_EXTCLK_ENA;
 	udiv = 1;
 	tmp  = gd->baudrate * 16;
-	bdiv = (CFG_EXT_SERIAL_CLOCK + tmp / 2) / tmp;
+	bdiv = (CONFIG_SYS_EXT_SERIAL_CLOCK + tmp / 2) / tmp;
 #else
 	serial_divs(gd->baudrate, &udiv, &bdiv);
 #endif
@@ -411,7 +411,7 @@ int serial_init_dev (unsigned long base)
 #ifdef CONFIG_405EP
 	reg = mfdcr(cpc0_ucr) & ~(UCR0_MASK | UCR1_MASK);
 	clk = gd->cpu_clk;
-	tmp = CFG_BASE_BAUD * 16;
+	tmp = CONFIG_SYS_BASE_BAUD * 16;
 	udiv = (clk + tmp / 2) / tmp;
 	if (udiv > UDIV_MAX)                    /* max. n bits for udiv */
 		udiv = UDIV_MAX;
@@ -420,16 +420,16 @@ int serial_init_dev (unsigned long base)
 	mtdcr (cpc0_ucr, reg);
 #else /* CONFIG_405EP */
 	reg = mfdcr(cntrl0) & ~CR0_MASK;
-#ifdef CFG_EXT_SERIAL_CLOCK
-	clk = CFG_EXT_SERIAL_CLOCK;
+#ifdef CONFIG_SYS_EXT_SERIAL_CLOCK
+	clk = CONFIG_SYS_EXT_SERIAL_CLOCK;
 	udiv = 1;
 	reg |= CR0_EXTCLK_ENA;
 #else
 	clk = gd->cpu_clk;
-#ifdef CFG_405_UART_ERRATA_59
+#ifdef CONFIG_SYS_405_UART_ERRATA_59
 	udiv = 31;			/* Errata 59: stuck at 31 */
 #else
-	tmp = CFG_BASE_BAUD * 16;
+	tmp = CONFIG_SYS_BASE_BAUD * 16;
 	udiv = (clk + tmp / 2) / tmp;
 	if (udiv > UDIV_MAX)                    /* max. n bits for udiv */
 		udiv = UDIV_MAX;
diff --git a/cpu/ppc4xx/Makefile b/cpu/ppc4xx/Makefile
index c773400a5..96ab5c6a4 100644
--- a/cpu/ppc4xx/Makefile
+++ b/cpu/ppc4xx/Makefile
@@ -35,6 +35,9 @@ SOBJS	+= kgdb.o
 COBJS	:= 40x_spd_sdram.o
 COBJS	+= 44x_spd_ddr.o
 COBJS	+= 44x_spd_ddr2.o
+ifdef CONFIG_PPC4xx_DDR_AUTOCALIBRATION
+COBJS	+= 4xx_ibm_ddr2_autocalib.o
+endif
 COBJS	+= 4xx_pci.o
 COBJS	+= 4xx_pcie.o
 COBJS	+= bedbug_405.o
@@ -57,7 +60,6 @@ COBJS	+= usb.o
 COBJS	+= usb_ohci.o
 COBJS	+= usbdev.o
 ifndef CONFIG_XILINX_440
-COBJS	+= 4xx_enet.o
 COBJS	+= 4xx_uart.o
 COBJS	+= gpio.o
 COBJS	+= miiphy.o
diff --git a/cpu/ppc4xx/cache.S b/cpu/ppc4xx/cache.S
index ceb3ec0d3..269716fce 100644
--- a/cpu/ppc4xx/cache.S
+++ b/cpu/ppc4xx/cache.S
@@ -143,8 +143,8 @@ _GLOBAL(flush_dcache)
 _GLOBAL(invalidate_dcache)
 	addi	r6,0,0x0000		/* clear GPR 6 */
 	/* Do loop for # of dcache congruence classes. */
-	lis	r7,(CFG_DCACHE_SIZE / L1_CACHE_BYTES / 2)@ha	/* TBS for large sized cache */
-	ori	r7,r7,(CFG_DCACHE_SIZE / L1_CACHE_BYTES / 2)@l
+	lis	r7,(CONFIG_SYS_DCACHE_SIZE / L1_CACHE_BYTES / 2)@ha	/* TBS for large sized cache */
+	ori	r7,r7,(CONFIG_SYS_DCACHE_SIZE / L1_CACHE_BYTES / 2)@l
 					/* NOTE: dccci invalidates both */
 	mtctr	r7			/* ways in the D cache */
 ..dcloop:
diff --git a/cpu/ppc4xx/commproc.c b/cpu/ppc4xx/commproc.c
index 8b2954c16..a1696d37e 100644
--- a/cpu/ppc4xx/commproc.c
+++ b/cpu/ppc4xx/commproc.c
@@ -30,10 +30,10 @@
 
 #if defined(CONFIG_POST) || defined(CONFIG_LOGBUFFER)
 
-#if defined(CFG_POST_WORD_ADDR)
-# define _POST_ADDR	((CFG_OCM_DATA_ADDR) + (CFG_POST_WORD_ADDR))
-#elif defined(CFG_POST_ALT_WORD_ADDR)
-# define _POST_ADDR	(CFG_POST_ALT_WORD_ADDR)
+#if defined(CONFIG_SYS_POST_WORD_ADDR)
+# define _POST_ADDR	((CONFIG_SYS_OCM_DATA_ADDR) + (CONFIG_SYS_POST_WORD_ADDR))
+#elif defined(CONFIG_SYS_POST_ALT_WORD_ADDR)
+# define _POST_ADDR	(CONFIG_SYS_POST_ALT_WORD_ADDR)
 #endif
 
 void post_word_store (ulong a)
@@ -57,7 +57,7 @@ ulong post_word_load (void)
 void bootcount_store (ulong a)
 {
 	volatile ulong *save_addr =
-		(volatile ulong *)(CFG_OCM_DATA_ADDR + CFG_BOOTCOUNT_ADDR);
+		(volatile ulong *)(CONFIG_SYS_OCM_DATA_ADDR + CONFIG_SYS_BOOTCOUNT_ADDR);
 
 	save_addr[0] = a;
 	save_addr[1] = BOOTCOUNT_MAGIC;
@@ -66,7 +66,7 @@ void bootcount_store (ulong a)
 ulong bootcount_load (void)
 {
 	volatile ulong *save_addr =
-		(volatile ulong *)(CFG_OCM_DATA_ADDR + CFG_BOOTCOUNT_ADDR);
+		(volatile ulong *)(CONFIG_SYS_OCM_DATA_ADDR + CONFIG_SYS_BOOTCOUNT_ADDR);
 
 	if (save_addr[1] != BOOTCOUNT_MAGIC)
 		return 0;
diff --git a/cpu/ppc4xx/cpu.c b/cpu/ppc4xx/cpu.c
index bc9335a05..d09c4c215 100644
--- a/cpu/ppc4xx/cpu.c
+++ b/cpu/ppc4xx/cpu.c
@@ -36,11 +36,24 @@
 #include <command.h>
 #include <asm/cache.h>
 #include <ppc4xx.h>
+#include <netdev.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
 void board_reset(void);
 
+/*
+ * To provide an interface to detect CPU number for boards that support
+ * more then one CPU, we implement the "weak" default functions here.
+ *
+ * Returns CPU number
+ */
+int __get_cpu_num(void)
+{
+	return NA_OR_UNKNOWN_CPU;
+}
+int get_cpu_num(void) __attribute__((weak, alias("__get_cpu_num")));
+
 #if defined(CONFIG_405GP) || \
     defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
     defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
@@ -274,8 +287,13 @@ int checkcpu (void)
 #if !defined(CONFIG_IOP480)
 	char addstr[64] = "";
 	sys_info_t sys_info;
+	int cpu_num;
 
-	puts ("CPU:   ");
+	cpu_num = get_cpu_num();
+	if (cpu_num >= 0)
+		printf("CPU%d:  ", cpu_num);
+	else
+		puts("CPU:   ");
 
 	get_sys_info(&sys_info);
 
@@ -629,14 +647,14 @@ int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 #if defined(CONFIG_BOARD_RESET)
 	board_reset();
 #else
-#if defined(CFG_4xx_RESET_TYPE)
-	mtspr(dbcr0, CFG_4xx_RESET_TYPE << 28);
+#if defined(CONFIG_SYS_4xx_RESET_TYPE)
+	mtspr(dbcr0, CONFIG_SYS_4xx_RESET_TYPE << 28);
 #else
 	/*
 	 * Initiate system reset in debug control register DBCR
 	 */
 	mtspr(dbcr0, 0x30000000);
-#endif /* defined(CFG_4xx_RESET_TYPE) */
+#endif /* defined(CONFIG_SYS_4xx_RESET_TYPE) */
 #endif /* defined(CONFIG_BOARD_RESET) */
 
 	return 1;
@@ -676,3 +694,15 @@ void reset_4xx_watchdog(void)
 	mtspr(tsr, 0x40000000);
 }
 #endif	/* CONFIG_WATCHDOG */
+
+/*
+ * Initializes on-chip ethernet controllers.
+ * to override, implement board_eth_init()
+ */
+int cpu_eth_init(bd_t *bis)
+{
+#if defined(CONFIG_PPC4xx_EMAC)
+	ppc_4xx_eth_initialize(bis);
+#endif
+	return 0;
+}
diff --git a/cpu/ppc4xx/cpu_init.c b/cpu/ppc4xx/cpu_init.c
index dee980771..b5d81f2e6 100644
--- a/cpu/ppc4xx/cpu_init.c
+++ b/cpu/ppc4xx/cpu_init.c
@@ -32,8 +32,8 @@
 DECLARE_GLOBAL_DATA_PTR;
 #endif
 
-#ifndef CFG_PLL_RECONFIG
-#define CFG_PLL_RECONFIG	0
+#ifndef CONFIG_SYS_PLL_RECONFIG
+#define CONFIG_SYS_PLL_RECONFIG	0
 #endif
 
 void reconfigure_pll(u32 new_cpu_freq)
@@ -142,32 +142,32 @@ cpu_init_f (void)
 	u32 val;
 #endif
 
-	reconfigure_pll(CFG_PLL_RECONFIG);
+	reconfigure_pll(CONFIG_SYS_PLL_RECONFIG);
 
-#if (defined(CONFIG_405EP) || defined (CONFIG_405EX)) && !defined(CFG_4xx_GPIO_TABLE)
+#if (defined(CONFIG_405EP) || defined (CONFIG_405EX)) && !defined(CONFIG_SYS_4xx_GPIO_TABLE)
 	/*
 	 * GPIO0 setup (select GPIO or alternate function)
 	 */
-#if defined(CFG_GPIO0_OR)
-	out32(GPIO0_OR, CFG_GPIO0_OR);		/* set initial state of output pins	*/
+#if defined(CONFIG_SYS_GPIO0_OR)
+	out32(GPIO0_OR, CONFIG_SYS_GPIO0_OR);		/* set initial state of output pins	*/
 #endif
-#if defined(CFG_GPIO0_ODR)
-	out32(GPIO0_ODR, CFG_GPIO0_ODR);	/* open-drain select			*/
+#if defined(CONFIG_SYS_GPIO0_ODR)
+	out32(GPIO0_ODR, CONFIG_SYS_GPIO0_ODR);	/* open-drain select			*/
 #endif
-	out32(GPIO0_OSRH, CFG_GPIO0_OSRH);	/* output select			*/
-	out32(GPIO0_OSRL, CFG_GPIO0_OSRL);
-	out32(GPIO0_ISR1H, CFG_GPIO0_ISR1H);	/* input select				*/
-	out32(GPIO0_ISR1L, CFG_GPIO0_ISR1L);
-	out32(GPIO0_TSRH, CFG_GPIO0_TSRH);	/* three-state select			*/
-	out32(GPIO0_TSRL, CFG_GPIO0_TSRL);
-#if defined(CFG_GPIO0_ISR2H)
-	out32(GPIO0_ISR2H, CFG_GPIO0_ISR2H);
-	out32(GPIO0_ISR2L, CFG_GPIO0_ISR2L);
+	out32(GPIO0_OSRH, CONFIG_SYS_GPIO0_OSRH);	/* output select			*/
+	out32(GPIO0_OSRL, CONFIG_SYS_GPIO0_OSRL);
+	out32(GPIO0_ISR1H, CONFIG_SYS_GPIO0_ISR1H);	/* input select				*/
+	out32(GPIO0_ISR1L, CONFIG_SYS_GPIO0_ISR1L);
+	out32(GPIO0_TSRH, CONFIG_SYS_GPIO0_TSRH);	/* three-state select			*/
+	out32(GPIO0_TSRL, CONFIG_SYS_GPIO0_TSRL);
+#if defined(CONFIG_SYS_GPIO0_ISR2H)
+	out32(GPIO0_ISR2H, CONFIG_SYS_GPIO0_ISR2H);
+	out32(GPIO0_ISR2L, CONFIG_SYS_GPIO0_ISR2L);
 #endif
-#if defined (CFG_GPIO0_TCR)
-	out32(GPIO0_TCR, CFG_GPIO0_TCR);	/* enable output driver for outputs	*/
+#if defined (CONFIG_SYS_GPIO0_TCR)
+	out32(GPIO0_TCR, CONFIG_SYS_GPIO0_TCR);	/* enable output driver for outputs	*/
 #endif
-#endif /* CONFIG_405EP ... && !CFG_4xx_GPIO_TABLE */
+#endif /* CONFIG_405EP ... && !CONFIG_SYS_4xx_GPIO_TABLE */
 
 #if defined (CONFIG_405EP)
 	/*
@@ -181,14 +181,14 @@ cpu_init_f (void)
 	mtdcr(cpc0_pci, mfdcr(cpc0_pci) | CPC0_PCI_HOST_CFG_EN | CPC0_PCI_ARBIT_EN);
 #endif /* CONFIG_405EP */
 
-#if defined(CFG_4xx_GPIO_TABLE)
+#if defined(CONFIG_SYS_4xx_GPIO_TABLE)
 	gpio_set_chip_configuration();
-#endif /* CFG_4xx_GPIO_TABLE */
+#endif /* CONFIG_SYS_4xx_GPIO_TABLE */
 
 	/*
 	 * External Bus Controller (EBC) Setup
 	 */
-#if (defined(CFG_EBC_PB0AP) && defined(CFG_EBC_PB0CR))
+#if (defined(CONFIG_SYS_EBC_PB0AP) && defined(CONFIG_SYS_EBC_PB0CR))
 #if (defined(CONFIG_405GP) || defined(CONFIG_405CR) || \
      defined(CONFIG_405EP) || defined(CONFIG_405EZ) || \
      defined(CONFIG_405EX) || defined(CONFIG_405))
@@ -209,47 +209,47 @@ cpu_init_f (void)
 	asm volatile("2:	bdnz	2b"		::: "ctr", "cr0");
 #endif
 
-	mtebc(pb0ap, CFG_EBC_PB0AP);
-	mtebc(pb0cr, CFG_EBC_PB0CR);
+	mtebc(pb0ap, CONFIG_SYS_EBC_PB0AP);
+	mtebc(pb0cr, CONFIG_SYS_EBC_PB0CR);
 #endif
 
-#if (defined(CFG_EBC_PB1AP) && defined(CFG_EBC_PB1CR) && !(CFG_INIT_DCACHE_CS == 1))
-	mtebc(pb1ap, CFG_EBC_PB1AP);
-	mtebc(pb1cr, CFG_EBC_PB1CR);
+#if (defined(CONFIG_SYS_EBC_PB1AP) && defined(CONFIG_SYS_EBC_PB1CR) && !(CONFIG_SYS_INIT_DCACHE_CS == 1))
+	mtebc(pb1ap, CONFIG_SYS_EBC_PB1AP);
+	mtebc(pb1cr, CONFIG_SYS_EBC_PB1CR);
 #endif
 
-#if (defined(CFG_EBC_PB2AP) && defined(CFG_EBC_PB2CR) && !(CFG_INIT_DCACHE_CS == 2))
-	mtebc(pb2ap, CFG_EBC_PB2AP);
-	mtebc(pb2cr, CFG_EBC_PB2CR);
+#if (defined(CONFIG_SYS_EBC_PB2AP) && defined(CONFIG_SYS_EBC_PB2CR) && !(CONFIG_SYS_INIT_DCACHE_CS == 2))
+	mtebc(pb2ap, CONFIG_SYS_EBC_PB2AP);
+	mtebc(pb2cr, CONFIG_SYS_EBC_PB2CR);
 #endif
 
-#if (defined(CFG_EBC_PB3AP) && defined(CFG_EBC_PB3CR) && !(CFG_INIT_DCACHE_CS == 3))
-	mtebc(pb3ap, CFG_EBC_PB3AP);
-	mtebc(pb3cr, CFG_EBC_PB3CR);
+#if (defined(CONFIG_SYS_EBC_PB3AP) && defined(CONFIG_SYS_EBC_PB3CR) && !(CONFIG_SYS_INIT_DCACHE_CS == 3))
+	mtebc(pb3ap, CONFIG_SYS_EBC_PB3AP);
+	mtebc(pb3cr, CONFIG_SYS_EBC_PB3CR);
 #endif
 
-#if (defined(CFG_EBC_PB4AP) && defined(CFG_EBC_PB4CR) && !(CFG_INIT_DCACHE_CS == 4))
-	mtebc(pb4ap, CFG_EBC_PB4AP);
-	mtebc(pb4cr, CFG_EBC_PB4CR);
+#if (defined(CONFIG_SYS_EBC_PB4AP) && defined(CONFIG_SYS_EBC_PB4CR) && !(CONFIG_SYS_INIT_DCACHE_CS == 4))
+	mtebc(pb4ap, CONFIG_SYS_EBC_PB4AP);
+	mtebc(pb4cr, CONFIG_SYS_EBC_PB4CR);
 #endif
 
-#if (defined(CFG_EBC_PB5AP) && defined(CFG_EBC_PB5CR) && !(CFG_INIT_DCACHE_CS == 5))
-	mtebc(pb5ap, CFG_EBC_PB5AP);
-	mtebc(pb5cr, CFG_EBC_PB5CR);
+#if (defined(CONFIG_SYS_EBC_PB5AP) && defined(CONFIG_SYS_EBC_PB5CR) && !(CONFIG_SYS_INIT_DCACHE_CS == 5))
+	mtebc(pb5ap, CONFIG_SYS_EBC_PB5AP);
+	mtebc(pb5cr, CONFIG_SYS_EBC_PB5CR);
 #endif
 
-#if (defined(CFG_EBC_PB6AP) && defined(CFG_EBC_PB6CR) && !(CFG_INIT_DCACHE_CS == 6))
-	mtebc(pb6ap, CFG_EBC_PB6AP);
-	mtebc(pb6cr, CFG_EBC_PB6CR);
+#if (defined(CONFIG_SYS_EBC_PB6AP) && defined(CONFIG_SYS_EBC_PB6CR) && !(CONFIG_SYS_INIT_DCACHE_CS == 6))
+	mtebc(pb6ap, CONFIG_SYS_EBC_PB6AP);
+	mtebc(pb6cr, CONFIG_SYS_EBC_PB6CR);
 #endif
 
-#if (defined(CFG_EBC_PB7AP) && defined(CFG_EBC_PB7CR) && !(CFG_INIT_DCACHE_CS == 7))
-	mtebc(pb7ap, CFG_EBC_PB7AP);
-	mtebc(pb7cr, CFG_EBC_PB7CR);
+#if (defined(CONFIG_SYS_EBC_PB7AP) && defined(CONFIG_SYS_EBC_PB7CR) && !(CONFIG_SYS_INIT_DCACHE_CS == 7))
+	mtebc(pb7ap, CONFIG_SYS_EBC_PB7AP);
+	mtebc(pb7cr, CONFIG_SYS_EBC_PB7CR);
 #endif
 
-#if defined (CFG_EBC_CFG)
-	mtebc(EBC0_CFG, CFG_EBC_CFG);
+#if defined (CONFIG_SYS_EBC_CFG)
+	mtebc(EBC0_CFG, CONFIG_SYS_EBC_CFG);
 #endif
 
 #if defined(CONFIG_WATCHDOG)
@@ -261,9 +261,9 @@ cpu_init_f (void)
 #else
 	val |= 0xf0000000;      /* generate system reset after 2.684 seconds */
 #endif
-#if defined(CFG_4xx_RESET_TYPE)
+#if defined(CONFIG_SYS_4xx_RESET_TYPE)
 	val &= ~0x30000000;			/* clear WRC bits */
-	val |= CFG_4xx_RESET_TYPE << 28;	/* set board specific WRC type */
+	val |= CONFIG_SYS_4xx_RESET_TYPE << 28;	/* set board specific WRC type */
 #endif
 	mtspr(tcr, val);
 
diff --git a/cpu/ppc4xx/denali_data_eye.c b/cpu/ppc4xx/denali_data_eye.c
index 967e61bd4..ffc381744 100644
--- a/cpu/ppc4xx/denali_data_eye.c
+++ b/cpu/ppc4xx/denali_data_eye.c
@@ -127,7 +127,7 @@ void denali_core_search_data_eye(void)
 		0x55AA55AA, 0x55AA55AA, 0xAA55AA55, 0xAA55AA55
 	};
 
-	ram_pointer = (volatile u32 *)(CFG_SDRAM_BASE);
+	ram_pointer = (volatile u32 *)(CONFIG_SYS_SDRAM_BASE);
 
 	for (wr_dqs_shift = 64; wr_dqs_shift < 96; wr_dqs_shift++) {
 		/* for (wr_dqs_shift=1; wr_dqs_shift<96; wr_dqs_shift++) { */
diff --git a/cpu/ppc4xx/denali_spd_ddr2.c b/cpu/ppc4xx/denali_spd_ddr2.c
index 670fc5c6e..4705e21b5 100644
--- a/cpu/ppc4xx/denali_spd_ddr2.c
+++ b/cpu/ppc4xx/denali_spd_ddr2.c
@@ -1048,8 +1048,8 @@ phys_size_t initdram(int board_type)
 	 * before continuing.
 	 */
 	/* switch to correct I2C bus */
-	I2C_SET_BUS(CFG_SPD_BUS_NUM);
-	i2c_init(CFG_I2C_SPEED, CFG_I2C_SLAVE);
+	I2C_SET_BUS(CONFIG_SYS_SPD_BUS_NUM);
+	i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
 
 	/*------------------------------------------------------------------
 	 * Clear out the serial presence detect buffers.
@@ -1185,27 +1185,27 @@ phys_size_t initdram(int board_type)
 	 * Map the first 1 MiB of memory in the TLB, and perform the data eye
 	 * search.
 	 */
-	program_tlb(0, CFG_SDRAM_BASE, TLB_1MB_SIZE, TLB_WORD2_I_ENABLE);
+	program_tlb(0, CONFIG_SYS_SDRAM_BASE, TLB_1MB_SIZE, TLB_WORD2_I_ENABLE);
 	denali_core_search_data_eye();
 	denali_sdram_register_dump();
-	remove_tlb(CFG_SDRAM_BASE, TLB_1MB_SIZE);
+	remove_tlb(CONFIG_SYS_SDRAM_BASE, TLB_1MB_SIZE);
 #endif
 
 #if defined(CONFIG_ZERO_SDRAM) || defined(CONFIG_DDR_ECC)
-	program_tlb(0, CFG_SDRAM_BASE, dram_size, 0);
+	program_tlb(0, CONFIG_SYS_SDRAM_BASE, dram_size, 0);
 	sync();
 	/* Zero the memory */
 	debug("Zeroing SDRAM...");
-#if defined(CFG_MEM_TOP_HIDE)
-	dcbz_area(CFG_SDRAM_BASE, dram_size - CFG_MEM_TOP_HIDE);
+#if defined(CONFIG_SYS_MEM_TOP_HIDE)
+	dcbz_area(CONFIG_SYS_SDRAM_BASE, dram_size - CONFIG_SYS_MEM_TOP_HIDE);
 #else
-#error Please define CFG_MEM_TOP_HIDE (see README) in your board config file
+#error Please define CONFIG_SYS_MEM_TOP_HIDE (see README) in your board config file
 #endif
 	/* Write modified dcache lines back to memory */
-	clean_dcache_range(CFG_SDRAM_BASE, CFG_SDRAM_BASE + dram_size - CFG_MEM_TOP_HIDE);
+	clean_dcache_range(CONFIG_SYS_SDRAM_BASE, CONFIG_SYS_SDRAM_BASE + dram_size - CONFIG_SYS_MEM_TOP_HIDE);
 	debug("Completed\n");
 	sync();
-	remove_tlb(CFG_SDRAM_BASE, dram_size);
+	remove_tlb(CONFIG_SYS_SDRAM_BASE, dram_size);
 
 #if defined(CONFIG_DDR_ECC)
 	/*
@@ -1236,7 +1236,7 @@ phys_size_t initdram(int board_type)
 #endif /* defined(CONFIG_DDR_ECC) */
 #endif /* defined(CONFIG_ZERO_SDRAM) || defined(CONFIG_DDR_ECC) */
 
-	program_tlb(0, CFG_SDRAM_BASE, dram_size, MY_TLB_WORD2_I_ENABLE);
+	program_tlb(0, CONFIG_SYS_SDRAM_BASE, dram_size, MY_TLB_WORD2_I_ENABLE);
 	return dram_size;
 }
 
diff --git a/cpu/ppc4xx/ecc.c b/cpu/ppc4xx/ecc.c
index a2eb07bd7..3f989e7f5 100644
--- a/cpu/ppc4xx/ecc.c
+++ b/cpu/ppc4xx/ecc.c
@@ -68,7 +68,7 @@
  *
  *  Output(s):
  *    start - A pointer to the start of memory covered by ECC with
- *	      CFG_ECC_PATTERN written to all locations and ECC data
+ *	      CONFIG_SYS_ECC_PATTERN written to all locations and ECC data
  *	      primed.
  *
  *  Returns:
@@ -76,7 +76,7 @@
  */
 void ecc_init(unsigned long * const start, unsigned long size)
 {
-	const unsigned long pattern = CFG_ECC_PATTERN;
+	const unsigned long pattern = CONFIG_SYS_ECC_PATTERN;
 	unsigned long * const end = (unsigned long * const)((long)start + size);
 	unsigned long * current = start;
 	unsigned long mcopt1;
diff --git a/cpu/ppc4xx/ecc.h b/cpu/ppc4xx/ecc.h
index aecf291a8..67c3bff87 100644
--- a/cpu/ppc4xx/ecc.h
+++ b/cpu/ppc4xx/ecc.h
@@ -33,9 +33,9 @@
 #ifndef _ECC_H_
 #define _ECC_H_
 
-#if !defined(CFG_ECC_PATTERN)
-#define	CFG_ECC_PATTERN	0x00000000
-#endif /* !defined(CFG_ECC_PATTERN) */
+#if !defined(CONFIG_SYS_ECC_PATTERN)
+#define	CONFIG_SYS_ECC_PATTERN	0x00000000
+#endif /* !defined(CONFIG_SYS_ECC_PATTERN) */
 
 /*
  * Since the IBM DDR controller used on 440GP/GX/EP/GR is not register
diff --git a/cpu/ppc4xx/fdt.c b/cpu/ppc4xx/fdt.c
index a97484fa7..c55e1cfbb 100644
--- a/cpu/ppc4xx/fdt.c
+++ b/cpu/ppc4xx/fdt.c
@@ -37,29 +37,40 @@ DECLARE_GLOBAL_DATA_PTR;
 
 void __ft_board_setup(void *blob, bd_t *bd)
 {
-	u32 val[4];
 	int rc;
+	int i;
+	u32 bxcr;
+	u32 ranges[EBC_NUM_BANKS * 4];
+	u32 *p = ranges;
+	char *ebc_path = "/plb/opb/ebc";
 
 	ft_cpu_setup(blob, bd);
 
-	/* Fixup NOR mapping */
-	val[0] = 0;				/* chip select number */
-	val[1] = 0;				/* always 0 */
-	val[2] = gd->bd->bi_flashstart;
-	val[3] = gd->bd->bi_flashsize;
-	if (fdt_path_offset(blob, "/plb/opb/ebc") >= 0) {
-		rc = fdt_find_and_setprop(blob, "/plb/opb/ebc", "ranges",
-					  val, sizeof(val), 1);
-	} else {
-		/*
-		 * Some 405 PPC's have EBC as direct PLB child in the dts
-		 */
-		rc = fdt_find_and_setprop(blob, "/plb/ebc", "ranges",
-					  val, sizeof(val), 1);
+	/*
+	 * Read 4xx EBC bus bridge registers to get mappings of the
+	 * peripheral banks into the OPB/PLB address space
+	 */
+	for (i = 0; i < EBC_NUM_BANKS; i++) {
+		mtdcr(ebccfga, EBC_BXCR(i));
+		bxcr = mfdcr(ebccfgd);
+
+		if ((bxcr & EBC_BXCR_BU_MASK) != EBC_BXCR_BU_NONE) {
+			*p++ = i;
+			*p++ = 0;
+			*p++ = bxcr & EBC_BXCR_BAS_MASK;
+			*p++ = EBC_BXCR_BANK_SIZE(bxcr);
+		}
 	}
-	if (rc)
-		printf("Unable to update property NOR mapping, err=%s\n",
+
+	/* Some 405 PPC's have EBC as direct PLB child in the dts */
+	if (fdt_path_offset(blob, "/plb/opb/ebc") < 0)
+		strcpy(ebc_path, "/plb/ebc");
+	rc = fdt_find_and_setprop(blob, ebc_path, "ranges", ranges,
+				  (p - ranges) * sizeof(u32), 1);
+	if (rc) {
+		printf("Unable to update property EBC mappings, err=%s\n",
 		       fdt_strerror(rc));
+	}
 }
 void ft_board_setup(void *blob, bd_t *bd) __attribute__((weak, alias("__ft_board_setup")));
 
diff --git a/cpu/ppc4xx/gpio.c b/cpu/ppc4xx/gpio.c
index df99f5314..c0d351a95 100644
--- a/cpu/ppc4xx/gpio.c
+++ b/cpu/ppc4xx/gpio.c
@@ -26,8 +26,8 @@
 #include <asm/io.h>
 #include <asm/gpio.h>
 
-#if defined(CFG_4xx_GPIO_TABLE)
-gpio_param_s const gpio_tab[GPIO_GROUP_MAX][GPIO_MAX] = CFG_4xx_GPIO_TABLE;
+#if defined(CONFIG_SYS_4xx_GPIO_TABLE)
+gpio_param_s const gpio_tab[GPIO_GROUP_MAX][GPIO_MAX] = CONFIG_SYS_4xx_GPIO_TABLE;
 #endif
 
 #if defined(GPIO0_OSRL)
@@ -132,7 +132,7 @@ int gpio_read_in_bit(int pin)
 	return (in_be32((void *)GPIO0_IR + offs) & GPIO_VAL(pin) ? 1 : 0);
 }
 
-#if defined(CFG_4xx_GPIO_TABLE)
+#if defined(CONFIG_SYS_4xx_GPIO_TABLE)
 void gpio_set_chip_configuration(void)
 {
 	unsigned char i=0, j=0, offs=0, gpio_core;
@@ -252,4 +252,4 @@ void gpio_set_chip_configuration(void)
 		}
 	}
 }
-#endif /* CFG_4xx_GPIO_TABLE */
+#endif /* CONFIG_SYS_4xx_GPIO_TABLE */
diff --git a/cpu/ppc4xx/i2c.c b/cpu/ppc4xx/i2c.c
index d8be2cef1..9d416ca5e 100644
--- a/cpu/ppc4xx/i2c.c
+++ b/cpu/ppc4xx/i2c.c
@@ -42,11 +42,10 @@ DECLARE_GLOBAL_DATA_PTR;
  * runs from ROM, and we can't switch buses because we can't modify
  * the global variables.
  */
-#ifdef CFG_SPD_BUS_NUM
-static unsigned int i2c_bus_num __attribute__ ((section ("data"))) = CFG_SPD_BUS_NUM;
-#else
-static unsigned int i2c_bus_num __attribute__ ((section ("data"))) = 0;
+#ifndef CONFIG_SYS_SPD_BUS_NUM
+#define CONFIG_SYS_SPD_BUS_NUM	0
 #endif
+static unsigned int i2c_bus_num __attribute__ ((section (".data"))) = CONFIG_SYS_SPD_BUS_NUM;
 #endif /* CONFIG_I2C_MULTI_BUS */
 
 static void _i2c_bus_reset(void)
@@ -95,14 +94,14 @@ void i2c_init(int speed, int slaveadd)
 	int val, divisor;
 	int bus;
 
-#ifdef CFG_I2C_INIT_BOARD
+#ifdef CONFIG_SYS_I2C_INIT_BOARD
 	/* call board specific i2c bus reset routine before accessing the   */
 	/* environment, which might be in a chip on that bus. For details   */
 	/* about this problem see doc/I2C_Edge_Conditions.                  */
 	i2c_init_board();
 #endif
 
-	for (bus = 0; bus < CFG_MAX_I2C_BUS; bus++) {
+	for (bus = 0; bus < CONFIG_SYS_MAX_I2C_BUS; bus++) {
 		I2C_SET_BUS(bus);
 
 		/* Handle possible failed I2C state */
@@ -161,7 +160,7 @@ void i2c_init(int speed, int slaveadd)
 	}
 
 	/* set to SPD bus as default bus upon powerup */
-	I2C_SET_BUS(CFG_SPD_BUS_NUM);
+	I2C_SET_BUS(CONFIG_SYS_SPD_BUS_NUM);
 }
 
 /*
@@ -361,7 +360,7 @@ int i2c_read(uchar chip, uint addr, int alen, uchar * buffer, int len)
 	}
 
 
-#ifdef CFG_I2C_EEPROM_ADDR_OVERFLOW
+#ifdef CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW
 	/*
 	 * EEPROM chips that implement "address overflow" are ones
 	 * like Catalyst 24WC04/08/16 which has 9/10/11 bits of
@@ -374,7 +373,7 @@ int i2c_read(uchar chip, uint addr, int alen, uchar * buffer, int len)
 	 * hidden in the chip address.
 	 */
 	if (alen > 0)
-		chip |= ((addr >> (alen * 8)) & CFG_I2C_EEPROM_ADDR_OVERFLOW);
+		chip |= ((addr >> (alen * 8)) & CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW);
 #endif
 	if ((ret = i2c_transfer(1, chip<<1, &xaddr[4-alen], alen, buffer, len)) != 0) {
 		if (gd->have_console)
@@ -401,7 +400,7 @@ int i2c_write(uchar chip, uint addr, int alen, uchar * buffer, int len)
 		xaddr[3] = addr & 0xFF;
 	}
 
-#ifdef CFG_I2C_EEPROM_ADDR_OVERFLOW
+#ifdef CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW
 	/*
 	 * EEPROM chips that implement "address overflow" are ones
 	 * like Catalyst 24WC04/08/16 which has 9/10/11 bits of
@@ -414,32 +413,12 @@ int i2c_write(uchar chip, uint addr, int alen, uchar * buffer, int len)
 	 * hidden in the chip address.
 	 */
 	if (alen > 0)
-		chip |= ((addr >> (alen * 8)) & CFG_I2C_EEPROM_ADDR_OVERFLOW);
+		chip |= ((addr >> (alen * 8)) & CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW);
 #endif
 
 	return (i2c_transfer(0, chip<<1, &xaddr[4-alen], alen, buffer, len ) != 0);
 }
 
-/*-----------------------------------------------------------------------
- * Read a register
- */
-uchar i2c_reg_read(uchar i2c_addr, uchar reg)
-{
-	uchar buf;
-
-	i2c_read(i2c_addr, reg, 1, &buf, 1);
-
-	return (buf);
-}
-
-/*-----------------------------------------------------------------------
- * Write a register
- */
-void i2c_reg_write(uchar i2c_addr, uchar reg, uchar val)
-{
-	i2c_write(i2c_addr, reg, 1, &val, 1);
-}
-
 #if defined(CONFIG_I2C_MULTI_BUS)
 /*
  * Functions for multiple I2C bus handling
@@ -451,7 +430,7 @@ unsigned int i2c_get_bus_num(void)
 
 int i2c_set_bus_num(unsigned int bus)
 {
-	if (bus >= CFG_MAX_I2C_BUS)
+	if (bus >= CONFIG_SYS_MAX_I2C_BUS)
 		return -1;
 
 	i2c_bus_num = bus;
@@ -463,12 +442,12 @@ int i2c_set_bus_num(unsigned int bus)
 /* TODO: add 100/400k switching */
 unsigned int i2c_get_bus_speed(void)
 {
-	return CFG_I2C_SPEED;
+	return CONFIG_SYS_I2C_SPEED;
 }
 
 int i2c_set_bus_speed(unsigned int speed)
 {
-	if (speed != CFG_I2C_SPEED)
+	if (speed != CONFIG_SYS_I2C_SPEED)
 		return -1;
 
 	return 0;
diff --git a/cpu/ppc4xx/miiphy.c b/cpu/ppc4xx/miiphy.c
index c8827201e..01710e71d 100644
--- a/cpu/ppc4xx/miiphy.c
+++ b/cpu/ppc4xx/miiphy.c
@@ -180,8 +180,10 @@ int phy_setup_aneg (char *devname, unsigned char addr)
  *
  * sr: Currently on 460EX only EMAC0 works with MDIO, so we always
  * return EMAC0 offset here
+ * vg: For 460EX/460GT if internal GPCS PHY address is specified
+ * return appropriate EMAC offset
  */
-unsigned int miiphy_getemac_offset (void)
+unsigned int miiphy_getemac_offset(u8 addr)
 {
 #if (defined(CONFIG_440) && \
     !defined(CONFIG_440SP) && !defined(CONFIG_440SPE) && \
@@ -233,6 +235,35 @@ unsigned int miiphy_getemac_offset (void)
 		return 0x100;
 #endif
 
+#if defined(CONFIG_460EX) || defined(CONFIG_460GT)
+	u32 eoffset = 0;
+
+	switch (addr) {
+#if defined(CONFIG_HAS_ETH1) && defined(CONFIG_GPCS_PHY1_ADDR)
+	case CONFIG_GPCS_PHY1_ADDR:
+		if (addr == EMAC_M1_IPPA_GET(in_be32((void *)EMAC_M1 + 0x100)))
+			eoffset = 0x100;
+		break;
+#endif
+#if defined(CONFIG_HAS_ETH2) && defined(CONFIG_GPCS_PHY2_ADDR)
+	case CONFIG_GPCS_PHY2_ADDR:
+		if (addr == EMAC_M1_IPPA_GET(in_be32((void *)EMAC_M1 + 0x300)))
+			eoffset = 0x300;
+		break;
+#endif
+#if defined(CONFIG_HAS_ETH3) && defined(CONFIG_GPCS_PHY3_ADDR)
+	case CONFIG_GPCS_PHY3_ADDR:
+		if (addr == EMAC_M1_IPPA_GET(in_be32((void *)EMAC_M1 + 0x400)))
+			eoffset = 0x400;
+		break;
+#endif
+	default:
+		eoffset = 0;
+		break;
+	}
+	return eoffset;
+#endif
+
 	return 0;
 #endif
 }
@@ -262,7 +293,7 @@ static int emac_miiphy_command(u8 addr, u8 reg, int cmd, u16 value)
 	u32 emac_reg;
 	u32 sta_reg;
 
-	emac_reg = miiphy_getemac_offset();
+	emac_reg = miiphy_getemac_offset(addr);
 
 	/* wait for completion */
 	if (emac_miiphy_wait(emac_reg) != 0)
@@ -270,7 +301,7 @@ static int emac_miiphy_command(u8 addr, u8 reg, int cmd, u16 value)
 
 	sta_reg = reg;		/* reg address */
 
-	/* set clock (50Mhz) and read flags */
+	/* set clock (50MHz) and read flags */
 #if defined(CONFIG_440GX) || defined(CONFIG_440SPE) || \
     defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
     defined(CONFIG_460EX) || defined(CONFIG_460GT) || \
@@ -311,7 +342,7 @@ int emac4xx_miiphy_read (char *devname, unsigned char addr, unsigned char reg,
 	unsigned long sta_reg;
 	unsigned long emac_reg;
 
-	emac_reg = miiphy_getemac_offset ();
+	emac_reg = miiphy_getemac_offset(addr);
 
 	if (emac_miiphy_command(addr, reg, EMAC_STACR_READ, 0) != 0)
 		return -1;
diff --git a/cpu/ppc4xx/ndfc.c b/cpu/ppc4xx/ndfc.c
index 7d96e796d..3a5af12db 100644
--- a/cpu/ppc4xx/ndfc.c
+++ b/cpu/ppc4xx/ndfc.c
@@ -149,8 +149,8 @@ static int ndfc_verify_buf(struct mtd_info *mtdinfo, const uint8_t *buf, int len
 }
 #endif /* #ifndef CONFIG_NAND_SPL */
 
-#ifndef CFG_NAND_BCR
-#define CFG_NAND_BCR 0x80002222
+#ifndef CONFIG_SYS_NAND_BCR
+#define CONFIG_SYS_NAND_BCR 0x80002222
 #endif
 
 void board_nand_select_device(struct nand_chip *nand, int chip)
@@ -165,7 +165,7 @@ void board_nand_select_device(struct nand_chip *nand, int chip)
 	/* Set NandFlash Core Configuration Register */
 	/* 1 col x 2 rows */
 	out_be32((u32 *)(base + NDFC_CCR), 0x00000000 | (cs << 24));
-	out_be32((u32 *)(base + NDFC_BCFG0 + (cs << 2)), CFG_NAND_BCR);
+	out_be32((u32 *)(base + NDFC_BCFG0 + (cs << 2)), CONFIG_SYS_NAND_BCR);
 }
 
 static void ndfc_select_chip(struct mtd_info *mtd, int chip)
@@ -214,8 +214,8 @@ int board_nand_init(struct nand_chip *nand)
 	 */
 	mtebc(EBC0_CFG, 0xb8400000);
 
-	mtebc(pb0cr, CFG_EBC_PB0CR);
-	mtebc(pb0ap, CFG_EBC_PB0AP);
+	mtebc(pb0cr, CONFIG_SYS_EBC_PB0CR);
+	mtebc(pb0ap, CONFIG_SYS_EBC_PB0AP);
 #endif
 
 	chip++;
diff --git a/cpu/ppc4xx/sdram.c b/cpu/ppc4xx/sdram.c
index 7d60ad667..6d5f8d65d 100644
--- a/cpu/ppc4xx/sdram.c
+++ b/cpu/ppc4xx/sdram.c
@@ -37,7 +37,7 @@
 
 #ifndef CONFIG_440
 
-#ifndef CFG_SDRAM_TABLE
+#ifndef CONFIG_SYS_SDRAM_TABLE
 sdram_conf_t mb0cf[] = {
 	{(128 << 20), 13, 0x000A4001},	    /* (0-128MB) Address Mode 3, 13x10(4) */
 	{(64 << 20),  13, 0x00084001},	    /* (0-64MB) Address Mode 3, 13x9(4)	  */
@@ -46,72 +46,72 @@ sdram_conf_t mb0cf[] = {
 	{(4 << 20),   11, 0x00008001},	    /* (0-4MB) Address Mode 5, 11x8(2)	  */
 };
 #else
-sdram_conf_t mb0cf[] = CFG_SDRAM_TABLE;
+sdram_conf_t mb0cf[] = CONFIG_SYS_SDRAM_TABLE;
 #endif
 
 #define N_MB0CF (sizeof(mb0cf) / sizeof(mb0cf[0]))
 
-#ifdef CFG_SDRAM_CASL
+#ifdef CONFIG_SYS_SDRAM_CASL
 static ulong ns2clks(ulong ns)
 {
 	ulong bus_period_x_10 = ONE_BILLION / (get_bus_freq(0) / 10);
 
 	return ((ns * 10) + bus_period_x_10) / bus_period_x_10;
 }
-#endif /* CFG_SDRAM_CASL */
+#endif /* CONFIG_SYS_SDRAM_CASL */
 
 static ulong compute_sdtr1(ulong speed)
 {
-#ifdef CFG_SDRAM_CASL
+#ifdef CONFIG_SYS_SDRAM_CASL
 	ulong tmp;
 	ulong sdtr1 = 0;
 
 	/* CASL */
-	if (CFG_SDRAM_CASL < 2)
+	if (CONFIG_SYS_SDRAM_CASL < 2)
 		sdtr1 |= (1 << SDRAM0_TR_CASL);
 	else
-		if (CFG_SDRAM_CASL > 4)
+		if (CONFIG_SYS_SDRAM_CASL > 4)
 			sdtr1 |= (3 << SDRAM0_TR_CASL);
 		else
-			sdtr1 |= ((CFG_SDRAM_CASL-1) << SDRAM0_TR_CASL);
+			sdtr1 |= ((CONFIG_SYS_SDRAM_CASL-1) << SDRAM0_TR_CASL);
 
 	/* PTA */
-	tmp = ns2clks(CFG_SDRAM_PTA);
+	tmp = ns2clks(CONFIG_SYS_SDRAM_PTA);
 	if ((tmp >= 2) && (tmp <= 4))
 		sdtr1 |= ((tmp-1) << SDRAM0_TR_PTA);
 	else
 		sdtr1 |= ((4-1) << SDRAM0_TR_PTA);
 
 	/* CTP */
-	tmp = ns2clks(CFG_SDRAM_CTP);
+	tmp = ns2clks(CONFIG_SYS_SDRAM_CTP);
 	if ((tmp >= 2) && (tmp <= 4))
 		sdtr1 |= ((tmp-1) << SDRAM0_TR_CTP);
 	else
 		sdtr1 |= ((4-1) << SDRAM0_TR_CTP);
 
 	/* LDF */
-	tmp = ns2clks(CFG_SDRAM_LDF);
+	tmp = ns2clks(CONFIG_SYS_SDRAM_LDF);
 	if ((tmp >= 2) && (tmp <= 4))
 		sdtr1 |= ((tmp-1) << SDRAM0_TR_LDF);
 	else
 		sdtr1 |= ((2-1) << SDRAM0_TR_LDF);
 
 	/* RFTA */
-	tmp = ns2clks(CFG_SDRAM_RFTA);
+	tmp = ns2clks(CONFIG_SYS_SDRAM_RFTA);
 	if ((tmp >= 4) && (tmp <= 10))
 		sdtr1 |= ((tmp-4) << SDRAM0_TR_RFTA);
 	else
 		sdtr1 |= ((10-4) << SDRAM0_TR_RFTA);
 
 	/* RCD */
-	tmp = ns2clks(CFG_SDRAM_RCD);
+	tmp = ns2clks(CONFIG_SYS_SDRAM_RCD);
 	if ((tmp >= 2) && (tmp <= 4))
 		sdtr1 |= ((tmp-1) << SDRAM0_TR_RCD);
 	else
 		sdtr1 |= ((4-1) << SDRAM0_TR_RCD);
 
 	return sdtr1;
-#else /* CFG_SDRAM_CASL */
+#else /* CONFIG_SYS_SDRAM_CASL */
 	/*
 	 * If no values are configured in the board config file
 	 * use the default values, which seem to be ok for most
@@ -133,20 +133,20 @@ static ulong compute_sdtr1(ulong speed)
 		 */
 		return 0x0086400d;
 	}
-#endif /* CFG_SDRAM_CASL */
+#endif /* CONFIG_SYS_SDRAM_CASL */
 }
 
 /* refresh is expressed in ms */
 static ulong compute_rtr(ulong speed, ulong rows, ulong refresh)
 {
-#ifdef CFG_SDRAM_CASL
+#ifdef CONFIG_SYS_SDRAM_CASL
 	ulong tmp;
 
 	tmp = ((refresh*1000*1000) / (1 << rows)) * (speed / 1000);
 	tmp /= 1000000;
 
 	return ((tmp & 0x00003FF8) << 16);
-#else /* CFG_SDRAM_CASL */
+#else /* CONFIG_SYS_SDRAM_CASL */
 	if (speed > 100000000) {
 		/*
 		 * 133 MHz SDRAM
@@ -158,7 +158,7 @@ static ulong compute_rtr(ulong speed, ulong rows, ulong refresh)
 		 */
 		return 0x05f00000;
 	}
-#endif /* CFG_SDRAM_CASL */
+#endif /* CONFIG_SYS_SDRAM_CASL */
 }
 
 /*
@@ -209,15 +209,15 @@ phys_size_t initdram(int board_type)
 		udelay(10000);
 
 		if (get_ram_size(0, mb0cf[i].size) == mb0cf[i].size) {
+			phys_size_t size = mb0cf[i].size;
+
 			/*
 			 * OK, size detected.  Enable second bank if
 			 * defined (assumes same type as bank 0)
 			 */
 #ifdef CONFIG_SDRAM_BANK1
-			u32 b1cr = mb0cf[i].size | mb0cf[i].reg;
-
 			mtsdram(mem_mcopt1, 0x00000000);
-			mtsdram(mem_mb1cf, b1cr); /* SDRAM0_B1CR */
+			mtsdram(mem_mb1cf, mb0cf[i].size | mb0cf[i].reg);
 			mtsdram(mem_mcopt1, 0x80800000);
 			udelay(10000);
 
@@ -230,13 +230,19 @@ phys_size_t initdram(int board_type)
 			    mb0cf[i].size) {
 				mtsdram(mem_mb1cf, 0);
 				mtsdram(mem_mcopt1, 0);
+			} else {
+				/*
+				 * We have two identical banks, so the size
+				 * is twice the bank size
+				 */
+				size = 2 * size;
 			}
 #endif
 
 			/*
 			 * OK, size detected -> all done
 			 */
-			return mb0cf[i].size;
+			return size;
 		}
 	}
 
@@ -250,17 +256,17 @@ phys_size_t initdram(int board_type)
  * board config file.
  */
 
-#ifndef CFG_SDRAM_TABLE
+#ifndef CONFIG_SYS_SDRAM_TABLE
 sdram_conf_t mb0cf[] = {
 	{(256 << 20), 13, 0x000C4001},	/* 256MB mode 3, 13x10(4)	*/
 	{(64 << 20),  12, 0x00082001}	/* 64MB mode 2, 12x9(4)		*/
 };
 #else
-sdram_conf_t mb0cf[] = CFG_SDRAM_TABLE;
+sdram_conf_t mb0cf[] = CONFIG_SYS_SDRAM_TABLE;
 #endif
 
-#ifndef CFG_SDRAM0_TR0
-#define	CFG_SDRAM0_TR0		0x41094012
+#ifndef CONFIG_SYS_SDRAM0_TR0
+#define	CONFIG_SYS_SDRAM0_TR0		0x41094012
 #endif
 
 #define N_MB0CF (sizeof(mb0cf) / sizeof(mb0cf[0]))
@@ -379,7 +385,7 @@ phys_size_t initdram(int board_type)
 		 * Following for CAS Latency = 2.5 @ 133 MHz PLB
 		 */
 		mtsdram(mem_b0cr, mb0cf[i].reg);
-		mtsdram(mem_tr0, CFG_SDRAM0_TR0);
+		mtsdram(mem_tr0, CONFIG_SYS_SDRAM0_TR0);
 		mtsdram(mem_tr1, 0x80800800);	/* SS=T2 SL=STAGE 3 CD=1 CT=0x00*/
 		mtsdram(mem_rtr, 0x04100000);	/* Interval 7.8µs @ 133MHz PLB	*/
 		mtsdram(mem_cfg1, 0x00000000);	/* Self-refresh exit, disable PM*/
diff --git a/cpu/ppc4xx/sdram.h b/cpu/ppc4xx/sdram.h
index 4fb9b1ae1..bea337653 100644
--- a/cpu/ppc4xx/sdram.h
+++ b/cpu/ppc4xx/sdram.h
@@ -47,19 +47,19 @@ typedef struct sdram_conf_s sdram_conf_t;
 #define SDRAM0_TR_RFTA		(31 - 29)
 #define SDRAM0_TR_RCD		(31 - 31)
 
-#ifdef CFG_SDRAM_CL
+#ifdef CONFIG_SYS_SDRAM_CL
 /* SDRAM timings [ns] according to AMCC/IBM names (see SDRAM_faq.doc) */
-#define CFG_SDRAM_CASL		CFG_SDRAM_CL
-#define CFG_SDRAM_PTA		CFG_SDRAM_tRP
-#define CFG_SDRAM_CTP		(CFG_SDRAM_tRC - CFG_SDRAM_tRCD - CFG_SDRAM_tRP)
-#define CFG_SDRAM_LDF		0
-#ifdef CFG_SDRAM_tRFC
-#define CFG_SDRAM_RFTA		CFG_SDRAM_tRFC
+#define CONFIG_SYS_SDRAM_CASL		CONFIG_SYS_SDRAM_CL
+#define CONFIG_SYS_SDRAM_PTA		CONFIG_SYS_SDRAM_tRP
+#define CONFIG_SYS_SDRAM_CTP		(CONFIG_SYS_SDRAM_tRC - CONFIG_SYS_SDRAM_tRCD - CONFIG_SYS_SDRAM_tRP)
+#define CONFIG_SYS_SDRAM_LDF		0
+#ifdef CONFIG_SYS_SDRAM_tRFC
+#define CONFIG_SYS_SDRAM_RFTA		CONFIG_SYS_SDRAM_tRFC
 #else
-#define CFG_SDRAM_RFTA		CFG_SDRAM_tRC
+#define CONFIG_SYS_SDRAM_RFTA		CONFIG_SYS_SDRAM_tRC
 #endif
-#define CFG_SDRAM_RCD		CFG_SDRAM_tRCD
-#endif /* #ifdef CFG_SDRAM_CL */
+#define CONFIG_SYS_SDRAM_RCD		CONFIG_SYS_SDRAM_tRCD
+#endif /* #ifdef CONFIG_SYS_SDRAM_CL */
 
 /*
  * Some defines for the 440 DDR controller
diff --git a/cpu/ppc4xx/speed.c b/cpu/ppc4xx/speed.c
index d21bd82dc..ed6e55b69 100644
--- a/cpu/ppc4xx/speed.c
+++ b/cpu/ppc4xx/speed.c
@@ -148,7 +148,7 @@ void get_sys_info (PPC4xx_SYS_INFO * sysInfo)
 		 * is equal to the 405GP SYS_CLK_FREQ. If not in bypass mode, check VCO
 		 * to make sure it is within the proper range.
 		 *    spec:    VCO = SYS_CLOCK x FBKDIV x PLBDIV x FWDDIV
-		 * Note freqVCO is calculated in Mhz to avoid errors introduced by rounding.
+		 * Note freqVCO is calculated in MHz to avoid errors introduced by rounding.
 		 */
 		if (sysInfo->pllFwdDiv == 1) {
 			sysInfo->freqProcessor = CONFIG_SYS_CLK_FREQ;
diff --git a/cpu/ppc4xx/start.S b/cpu/ppc4xx/start.S
index 97411bdb9..f2b8908b9 100644
--- a/cpu/ppc4xx/start.S
+++ b/cpu/ppc4xx/start.S
@@ -63,6 +63,7 @@
  */
 #include <config.h>
 #include <ppc4xx.h>
+#include <timestamp.h>
 #include <version.h>
 
 #define _LINUX_CONFIG_H 1	/* avoid reading Linux autoconf.h file	*/
@@ -72,74 +73,75 @@
 
 #include <asm/cache.h>
 #include <asm/mmu.h>
+#include <asm/ppc4xx-isram.h>
 
 #ifndef	 CONFIG_IDENT_STRING
 #define	 CONFIG_IDENT_STRING ""
 #endif
 
-#ifdef CFG_INIT_DCACHE_CS
-# if (CFG_INIT_DCACHE_CS == 0)
+#ifdef CONFIG_SYS_INIT_DCACHE_CS
+# if (CONFIG_SYS_INIT_DCACHE_CS == 0)
 #  define PBxAP pb0ap
 #  define PBxCR pb0cr
-#  if (defined(CFG_EBC_PB0AP) && defined(CFG_EBC_PB0CR))
-#   define PBxAP_VAL CFG_EBC_PB0AP
-#   define PBxCR_VAL CFG_EBC_PB0CR
+#  if (defined(CONFIG_SYS_EBC_PB0AP) && defined(CONFIG_SYS_EBC_PB0CR))
+#   define PBxAP_VAL CONFIG_SYS_EBC_PB0AP
+#   define PBxCR_VAL CONFIG_SYS_EBC_PB0CR
 #  endif
 # endif
-# if (CFG_INIT_DCACHE_CS == 1)
+# if (CONFIG_SYS_INIT_DCACHE_CS == 1)
 #  define PBxAP pb1ap
 #  define PBxCR pb1cr
-#  if (defined(CFG_EBC_PB1AP) && defined(CFG_EBC_PB1CR))
-#   define PBxAP_VAL CFG_EBC_PB1AP
-#   define PBxCR_VAL CFG_EBC_PB1CR
+#  if (defined(CONFIG_SYS_EBC_PB1AP) && defined(CONFIG_SYS_EBC_PB1CR))
+#   define PBxAP_VAL CONFIG_SYS_EBC_PB1AP
+#   define PBxCR_VAL CONFIG_SYS_EBC_PB1CR
 #  endif
 # endif
-# if (CFG_INIT_DCACHE_CS == 2)
+# if (CONFIG_SYS_INIT_DCACHE_CS == 2)
 #  define PBxAP pb2ap
 #  define PBxCR pb2cr
-#  if (defined(CFG_EBC_PB2AP) && defined(CFG_EBC_PB2CR))
-#   define PBxAP_VAL CFG_EBC_PB2AP
-#   define PBxCR_VAL CFG_EBC_PB2CR
+#  if (defined(CONFIG_SYS_EBC_PB2AP) && defined(CONFIG_SYS_EBC_PB2CR))
+#   define PBxAP_VAL CONFIG_SYS_EBC_PB2AP
+#   define PBxCR_VAL CONFIG_SYS_EBC_PB2CR
 #  endif
 # endif
-# if (CFG_INIT_DCACHE_CS == 3)
+# if (CONFIG_SYS_INIT_DCACHE_CS == 3)
 #  define PBxAP pb3ap
 #  define PBxCR pb3cr
-#  if (defined(CFG_EBC_PB3AP) && defined(CFG_EBC_PB3CR))
-#   define PBxAP_VAL CFG_EBC_PB3AP
-#   define PBxCR_VAL CFG_EBC_PB3CR
+#  if (defined(CONFIG_SYS_EBC_PB3AP) && defined(CONFIG_SYS_EBC_PB3CR))
+#   define PBxAP_VAL CONFIG_SYS_EBC_PB3AP
+#   define PBxCR_VAL CONFIG_SYS_EBC_PB3CR
 #  endif
 # endif
-# if (CFG_INIT_DCACHE_CS == 4)
+# if (CONFIG_SYS_INIT_DCACHE_CS == 4)
 #  define PBxAP pb4ap
 #  define PBxCR pb4cr
-#  if (defined(CFG_EBC_PB4AP) && defined(CFG_EBC_PB4CR))
-#   define PBxAP_VAL CFG_EBC_PB4AP
-#   define PBxCR_VAL CFG_EBC_PB4CR
+#  if (defined(CONFIG_SYS_EBC_PB4AP) && defined(CONFIG_SYS_EBC_PB4CR))
+#   define PBxAP_VAL CONFIG_SYS_EBC_PB4AP
+#   define PBxCR_VAL CONFIG_SYS_EBC_PB4CR
 #  endif
 # endif
-# if (CFG_INIT_DCACHE_CS == 5)
+# if (CONFIG_SYS_INIT_DCACHE_CS == 5)
 #  define PBxAP pb5ap
 #  define PBxCR pb5cr
-#  if (defined(CFG_EBC_PB5AP) && defined(CFG_EBC_PB5CR))
-#   define PBxAP_VAL CFG_EBC_PB5AP
-#   define PBxCR_VAL CFG_EBC_PB5CR
+#  if (defined(CONFIG_SYS_EBC_PB5AP) && defined(CONFIG_SYS_EBC_PB5CR))
+#   define PBxAP_VAL CONFIG_SYS_EBC_PB5AP
+#   define PBxCR_VAL CONFIG_SYS_EBC_PB5CR
 #  endif
 # endif
-# if (CFG_INIT_DCACHE_CS == 6)
+# if (CONFIG_SYS_INIT_DCACHE_CS == 6)
 #  define PBxAP pb6ap
 #  define PBxCR pb6cr
-#  if (defined(CFG_EBC_PB6AP) && defined(CFG_EBC_PB6CR))
-#   define PBxAP_VAL CFG_EBC_PB6AP
-#   define PBxCR_VAL CFG_EBC_PB6CR
+#  if (defined(CONFIG_SYS_EBC_PB6AP) && defined(CONFIG_SYS_EBC_PB6CR))
+#   define PBxAP_VAL CONFIG_SYS_EBC_PB6AP
+#   define PBxCR_VAL CONFIG_SYS_EBC_PB6CR
 #  endif
 # endif
-# if (CFG_INIT_DCACHE_CS == 7)
+# if (CONFIG_SYS_INIT_DCACHE_CS == 7)
 #  define PBxAP pb7ap
 #  define PBxCR pb7cr
-#  if (defined(CFG_EBC_PB7AP) && defined(CFG_EBC_PB7CR))
-#   define PBxAP_VAL CFG_EBC_PB7AP
-#   define PBxCR_VAL CFG_EBC_PB7CR
+#  if (defined(CONFIG_SYS_EBC_PB7AP) && defined(CONFIG_SYS_EBC_PB7CR))
+#   define PBxAP_VAL CONFIG_SYS_EBC_PB7AP
+#   define PBxCR_VAL CONFIG_SYS_EBC_PB7CR
 #  endif
 # endif
 # ifndef PBxAP_VAL
@@ -149,11 +151,11 @@
 #  define PBxCR_VAL	0
 # endif
 /*
- * Memory Bank x (nothingness) initialization CFG_INIT_RAM_ADDR + 64 MiB
+ * Memory Bank x (nothingness) initialization CONFIG_SYS_INIT_RAM_ADDR + 64 MiB
  * used as temporary stack pointer for the primordial stack
  */
-# ifndef CFG_INIT_DCACHE_PBxAR
-#  define CFG_INIT_DCACHE_PBxAR	(EBC_BXAP_BME_DISABLED			| \
+# ifndef CONFIG_SYS_INIT_DCACHE_PBxAR
+#  define CONFIG_SYS_INIT_DCACHE_PBxAR	(EBC_BXAP_BME_DISABLED			| \
 				 EBC_BXAP_TWT_ENCODE(7)			| \
 				 EBC_BXAP_BCE_DISABLE			| \
 				 EBC_BXAP_BCT_2TRANS			| \
@@ -166,42 +168,42 @@
 				 EBC_BXAP_SOR_NONDELAYED		| \
 				 EBC_BXAP_BEM_WRITEONLY			| \
 				 EBC_BXAP_PEN_DISABLED)
-# endif /* CFG_INIT_DCACHE_PBxAR */
-# ifndef CFG_INIT_DCACHE_PBxCR
-#  define CFG_INIT_DCACHE_PBxCR	(EBC_BXCR_BAS_ENCODE(CFG_INIT_RAM_ADDR)	| \
+# endif /* CONFIG_SYS_INIT_DCACHE_PBxAR */
+# ifndef CONFIG_SYS_INIT_DCACHE_PBxCR
+#  define CONFIG_SYS_INIT_DCACHE_PBxCR	(EBC_BXCR_BAS_ENCODE(CONFIG_SYS_INIT_RAM_ADDR)	| \
 				 EBC_BXCR_BS_64MB			| \
 				 EBC_BXCR_BU_RW				| \
 				 EBC_BXCR_BW_16BIT)
-# endif /* CFG_INIT_DCACHE_PBxCR */
-# ifndef CFG_INIT_RAM_PATTERN
-#  define CFG_INIT_RAM_PATTERN	0xDEADDEAD
+# endif /* CONFIG_SYS_INIT_DCACHE_PBxCR */
+# ifndef CONFIG_SYS_INIT_RAM_PATTERN
+#  define CONFIG_SYS_INIT_RAM_PATTERN	0xDEADDEAD
 # endif
-#endif /* CFG_INIT_DCACHE_CS */
+#endif /* CONFIG_SYS_INIT_DCACHE_CS */
 
-#if (defined(CFG_INIT_RAM_DCACHE) && (CFG_INIT_RAM_END > (4 << 10)))
-#error Only 4k of init-ram is supported - please adjust CFG_INIT_RAM_END!
+#if (defined(CONFIG_SYS_INIT_RAM_DCACHE) && (CONFIG_SYS_INIT_RAM_END > (4 << 10)))
+#error Only 4k of init-ram is supported - please adjust CONFIG_SYS_INIT_RAM_END!
 #endif
 
 /*
  * Unless otherwise overriden, enable two 128MB cachable instruction regions
- * at CFG_SDRAM_BASE and another 128MB cacheable instruction region covering
- * NOR flash at CFG_FLASH_BASE. Disable all cacheable data regions.
+ * at CONFIG_SYS_SDRAM_BASE and another 128MB cacheable instruction region covering
+ * NOR flash at CONFIG_SYS_FLASH_BASE. Disable all cacheable data regions.
  */
-#if !defined(CFG_FLASH_BASE)
+#if !defined(CONFIG_SYS_FLASH_BASE)
 /* If not already defined, set it to the "last" 128MByte region */
-# define CFG_FLASH_BASE		0xf8000000
+# define CONFIG_SYS_FLASH_BASE		0xf8000000
 #endif
-#if !defined(CFG_ICACHE_SACR_VALUE)
-# define CFG_ICACHE_SACR_VALUE		\
-		(PPC_128MB_SACR_VALUE(CFG_SDRAM_BASE + (  0 << 20)) | \
-		 PPC_128MB_SACR_VALUE(CFG_SDRAM_BASE + (128 << 20)) | \
-		 PPC_128MB_SACR_VALUE(CFG_FLASH_BASE))
-#endif /* !defined(CFG_ICACHE_SACR_VALUE) */
-
-#if !defined(CFG_DCACHE_SACR_VALUE)
-# define CFG_DCACHE_SACR_VALUE		\
+#if !defined(CONFIG_SYS_ICACHE_SACR_VALUE)
+# define CONFIG_SYS_ICACHE_SACR_VALUE		\
+		(PPC_128MB_SACR_VALUE(CONFIG_SYS_SDRAM_BASE + (  0 << 20)) | \
+		 PPC_128MB_SACR_VALUE(CONFIG_SYS_SDRAM_BASE + (128 << 20)) | \
+		 PPC_128MB_SACR_VALUE(CONFIG_SYS_FLASH_BASE))
+#endif /* !defined(CONFIG_SYS_ICACHE_SACR_VALUE) */
+
+#if !defined(CONFIG_SYS_DCACHE_SACR_VALUE)
+# define CONFIG_SYS_DCACHE_SACR_VALUE		\
 		(0x00000000)
-#endif /* !defined(CFG_DCACHE_SACR_VALUE) */
+#endif /* !defined(CONFIG_SYS_DCACHE_SACR_VALUE) */
 
 #define function_prolog(func_name)	.text; \
 					.align 2; \
@@ -509,7 +511,7 @@ rsttlb:	tlbwe	r0,r1,0x0000	/* Invalidate all entries (V=0)*/
 	.globl	version_string
 version_string:
 	.ascii U_BOOT_VERSION
-	.ascii " (", __DATE__, " - ", __TIME__, ")"
+	.ascii " (", U_BOOT_DATE, " - ", U_BOOT_TIME, ")"
 	.ascii CONFIG_IDENT_STRING, "\0"
 
 	. = EXC_OFF_SYS_RESET
@@ -609,15 +611,15 @@ _start:
 
 	/*----------------------------------------------------------------*/
 	/* Debug setup -- some (not very good) ice's need an event*/
-	/* to establish control :-( Define CFG_INIT_DBCR to the dbsr */
+	/* to establish control :-( Define CONFIG_SYS_INIT_DBCR to the dbsr */
 	/* value you need in this case 0x8cff 0000 should do the trick */
 	/*----------------------------------------------------------------*/
-#if defined(CFG_INIT_DBCR)
+#if defined(CONFIG_SYS_INIT_DBCR)
 	lis	r1,0xffff
 	ori	r1,r1,0xffff
 	mtspr	dbsr,r1			/* Clear all status bits */
-	lis	r0,CFG_INIT_DBCR@h
-	ori	r0,r0,CFG_INIT_DBCR@l
+	lis	r0,CONFIG_SYS_INIT_DBCR@h
+	ori	r0,r0,CONFIG_SYS_INIT_DBCR@l
 	mtspr	dbcr0,r0
 	isync
 #endif
@@ -627,12 +629,12 @@ _start:
 	/*----------------------------------------------------------------*/
 	li	r0,0
 
-#ifdef CFG_INIT_RAM_DCACHE
+#ifdef CONFIG_SYS_INIT_RAM_DCACHE
 	/* Clear Dcache to use as RAM */
-	addis	r3,r0,CFG_INIT_RAM_ADDR@h
-	ori	r3,r3,CFG_INIT_RAM_ADDR@l
-	addis	r4,r0,CFG_INIT_RAM_END@h
-	ori	r4,r4,CFG_INIT_RAM_END@l
+	addis	r3,r0,CONFIG_SYS_INIT_RAM_ADDR@h
+	ori	r3,r3,CONFIG_SYS_INIT_RAM_ADDR@l
+	addis	r4,r0,CONFIG_SYS_INIT_RAM_END@h
+	ori	r4,r4,CONFIG_SYS_INIT_RAM_END@l
 	rlwinm. r5,r4,0,27,31
 	rlwinm	r5,r4,27,5,31
 	beq	..d_ran
@@ -670,82 +672,95 @@ _start:
 	mtspr	dtv3,r1
 	msync
 	isync
-#endif /* CFG_INIT_RAM_DCACHE */
+#endif /* CONFIG_SYS_INIT_RAM_DCACHE */
 
 	/* 440EP & 440GR are only 440er PPC's without internal SRAM */
 #if !defined(CONFIG_440EP) && !defined(CONFIG_440GR)
 	/* not all PPC's have internal SRAM usable as L2-cache */
 #if defined(CONFIG_440GX) || \
     defined(CONFIG_440SP) || defined(CONFIG_440SPE) || \
-    defined(CONFIG_460EX) || defined(CONFIG_460GT) || \
     defined(CONFIG_460SX)
-	mtdcr	l2_cache_cfg,r0		/* Ensure L2 Cache is off */
+	mtdcr	L2_CACHE_CFG,r0		/* Ensure L2 Cache is off */
+#elif defined(CONFIG_460EX) || defined(CONFIG_460GT)
+	lis	r1, 0x0000
+	ori	r1,r1,0x0008		/* Set L2_CACHE_CFG[RDBW]=1 */
+	mtdcr	L2_CACHE_CFG,r1
 #endif
 
 	lis	r2,0x7fff
 	ori	r2,r2,0xffff
-	mfdcr	r1,isram0_dpc
+	mfdcr	r1,ISRAM0_DPC
 	and	r1,r1,r2		/* Disable parity check */
-	mtdcr	isram0_dpc,r1
-	mfdcr	r1,isram0_pmeg
+	mtdcr	ISRAM0_DPC,r1
+	mfdcr	r1,ISRAM0_PMEG
 	and	r1,r1,r2		/* Disable pwr mgmt */
-	mtdcr	isram0_pmeg,r1
+	mtdcr	ISRAM0_PMEG,r1
 
 	lis	r1,0x8000		/* BAS = 8000_0000 */
 #if defined(CONFIG_440GX) || defined(CONFIG_440SP)
 	ori	r1,r1,0x0980		/* first 64k */
-	mtdcr	isram0_sb0cr,r1
+	mtdcr	ISRAM0_SB0CR,r1
 	lis	r1,0x8001
 	ori	r1,r1,0x0980		/* second 64k */
-	mtdcr	isram0_sb1cr,r1
+	mtdcr	ISRAM0_SB1CR,r1
 	lis	r1, 0x8002
 	ori	r1,r1, 0x0980		/* third 64k */
-	mtdcr	isram0_sb2cr,r1
+	mtdcr	ISRAM0_SB2CR,r1
 	lis	r1, 0x8003
 	ori	r1,r1, 0x0980		/* fourth 64k */
-	mtdcr	isram0_sb3cr,r1
-#elif defined(CONFIG_440SPE)
-	lis	r1,0x0000		/* BAS = 0000_0000 */
+	mtdcr	ISRAM0_SB3CR,r1
+#elif defined(CONFIG_440SPE) || defined(CONFIG_460EX) || defined(CONFIG_460GT)
+	lis	r1,0x0000		/* BAS = X_0000_0000 */
 	ori	r1,r1,0x0984		/* first 64k */
-	mtdcr	isram0_sb0cr,r1
+	mtdcr	ISRAM0_SB0CR,r1
 	lis	r1,0x0001
 	ori	r1,r1,0x0984		/* second 64k */
-	mtdcr	isram0_sb1cr,r1
+	mtdcr	ISRAM0_SB1CR,r1
 	lis	r1, 0x0002
 	ori	r1,r1, 0x0984		/* third 64k */
-	mtdcr	isram0_sb2cr,r1
+	mtdcr	ISRAM0_SB2CR,r1
 	lis	r1, 0x0003
 	ori	r1,r1, 0x0984		/* fourth 64k */
-	mtdcr	isram0_sb3cr,r1
-#elif defined(CONFIG_460EX) || defined(CONFIG_460GT)
-	lis	r1,0x4000		/* BAS = 8000_0000 */
-	ori	r1,r1,0x4580		/* 16k */
-	mtdcr	isram0_sb0cr,r1
+	mtdcr	ISRAM0_SB3CR,r1
+#if defined(CONFIG_460EX) || defined(CONFIG_460GT)
+	lis	r2,0x7fff
+	ori	r2,r2,0xffff
+	mfdcr	r1,ISRAM1_DPC
+	and	r1,r1,r2		/* Disable parity check */
+	mtdcr	ISRAM1_DPC,r1
+	mfdcr	r1,ISRAM1_PMEG
+	and	r1,r1,r2		/* Disable pwr mgmt */
+	mtdcr	ISRAM1_PMEG,r1
+
+	lis	r1,0x0004		/* BAS = 4_0004_0000 */
+	ori	r1,r1,0x0984		/* 64k */
+	mtdcr	ISRAM1_SB0CR,r1
+#endif
 #elif defined(CONFIG_460SX)
 	lis     r1,0x0000               /* BAS = 0000_0000 */
 	ori     r1,r1,0x0B84            /* first 128k */
-	mtdcr   isram0_sb0cr,r1
+	mtdcr   ISRAM0_SB0CR,r1
 	lis     r1,0x0001
 	ori     r1,r1,0x0B84            /* second 128k */
-	mtdcr   isram0_sb1cr,r1
+	mtdcr   ISRAM0_SB1CR,r1
 	lis     r1, 0x0002
 	ori     r1,r1, 0x0B84           /* third 128k */
-	mtdcr   isram0_sb2cr,r1
+	mtdcr   ISRAM0_SB2CR,r1
 	lis     r1, 0x0003
 	ori     r1,r1, 0x0B84           /* fourth 128k */
-	mtdcr   isram0_sb3cr,r1
+	mtdcr   ISRAM0_SB3CR,r1
 #elif defined(CONFIG_440GP)
 	ori	r1,r1,0x0380		/* 8k rw */
-	mtdcr	isram0_sb0cr,r1
-	mtdcr	isram0_sb1cr,r0		/* Disable bank 1 */
+	mtdcr	ISRAM0_SB0CR,r1
+	mtdcr	ISRAM0_SB1CR,r0		/* Disable bank 1 */
 #endif
 #endif /* #if !defined(CONFIG_440EP) && !defined(CONFIG_440GR) */
 
 	/*----------------------------------------------------------------*/
 	/* Setup the stack in internal SRAM */
 	/*----------------------------------------------------------------*/
-	lis	r1,CFG_INIT_RAM_ADDR@h
-	ori	r1,r1,CFG_INIT_SP_OFFSET@l
+	lis	r1,CONFIG_SYS_INIT_RAM_ADDR@h
+	ori	r1,r1,CONFIG_SYS_INIT_SP_OFFSET@l
 	li	r0,0
 	stwu	r0,-4(r1)
 	stwu	r0,-4(r1)		/* Terminate call chain */
@@ -852,18 +867,18 @@ _start:
 	sync
 
 	/* Set-up icache cacheability. */
-	lis	r1, CFG_ICACHE_SACR_VALUE@h
-	ori	r1, r1, CFG_ICACHE_SACR_VALUE@l
+	lis	r1, CONFIG_SYS_ICACHE_SACR_VALUE@h
+	ori	r1, r1, CONFIG_SYS_ICACHE_SACR_VALUE@l
 	mticcr	r1
 	isync
 
 	/* Set-up dcache cacheability. */
-	lis	r1, CFG_DCACHE_SACR_VALUE@h
-	ori	r1, r1, CFG_DCACHE_SACR_VALUE@l
+	lis	r1, CONFIG_SYS_DCACHE_SACR_VALUE@h
+	ori	r1, r1, CONFIG_SYS_DCACHE_SACR_VALUE@l
 	mtdccr	r1
 
-	addis	r1,r0,CFG_INIT_RAM_ADDR@h
-	ori	r1,r1,CFG_INIT_SP_OFFSET /* set up the stack to SDRAM */
+	addis	r1,r0,CONFIG_SYS_INIT_RAM_ADDR@h
+	ori	r1,r1,CONFIG_SYS_INIT_SP_OFFSET /* set up the stack to SDRAM */
 	li	r0, 0			/* Make room for stack frame header and */
 	stwu	r0, -4(r1)		/* clear final stack frame so that	*/
 	stwu	r0, -4(r1)		/* stack backtraces terminate cleanly	*/
@@ -908,31 +923,32 @@ _start:
 	bl	invalidate_dcache
 
 	/* Set-up icache cacheability. */
-	lis	r4, CFG_ICACHE_SACR_VALUE@h
-	ori	r4, r4, CFG_ICACHE_SACR_VALUE@l
+	lis	r4, CONFIG_SYS_ICACHE_SACR_VALUE@h
+	ori	r4, r4, CONFIG_SYS_ICACHE_SACR_VALUE@l
 	mticcr	r4
 	isync
 
 	/* Set-up dcache cacheability. */
-	lis	r4, CFG_DCACHE_SACR_VALUE@h
-	ori	r4, r4, CFG_DCACHE_SACR_VALUE@l
+	lis	r4, CONFIG_SYS_DCACHE_SACR_VALUE@h
+	ori	r4, r4, CONFIG_SYS_DCACHE_SACR_VALUE@l
 	mtdccr	r4
 
-#if !(defined(CFG_EBC_PB0AP) && defined(CFG_EBC_PB0CR))
+#if !(defined(CONFIG_SYS_EBC_PB0AP) && defined(CONFIG_SYS_EBC_PB0CR))\
+				&& !defined (CONFIG_XILINX_405)
 	/*----------------------------------------------------------------------- */
 	/* Tune the speed and size for flash CS0  */
 	/*----------------------------------------------------------------------- */
 	bl	ext_bus_cntlr_init
 #endif
 
-#if !(defined(CFG_INIT_DCACHE_CS) || defined(CFG_TEMP_STACK_OCM))
+#if !(defined(CONFIG_SYS_INIT_DCACHE_CS) || defined(CONFIG_SYS_TEMP_STACK_OCM))
 	/*
 	 * For boards that don't have OCM and can't use the data cache
 	 * for their primordial stack, setup stack here directly after the
 	 * SDRAM is initialized in ext_bus_cntlr_init.
 	 */
-	lis	r1, CFG_INIT_RAM_ADDR@h
-	ori	r1,r1,CFG_INIT_SP_OFFSET /* set up the stack in SDRAM */
+	lis	r1, CONFIG_SYS_INIT_RAM_ADDR@h
+	ori	r1,r1,CONFIG_SYS_INIT_SP_OFFSET /* set up the stack in SDRAM */
 
 	li	r0, 0			/* Make room for stack frame header and */
 	stwu	r0, -4(r1)		/* clear final stack frame so that	*/
@@ -946,7 +962,7 @@ _start:
 	ori	r0, r0, RESET_VECTOR@l
 	stwu	r1, -8(r1)		/* Save back chain and move SP */
 	stw	r0, +12(r1)		/* Save return addr (underflow vect) */
-#endif /* !(CFG_INIT_DCACHE_CS	|| !CFG_TEM_STACK_OCM) */
+#endif /* !(CONFIG_SYS_INIT_DCACHE_CS	|| !CONFIG_SYS_TEM_STACK_OCM) */
 
 #if defined(CONFIG_405EP)
 	/*----------------------------------------------------------------------- */
@@ -959,25 +975,25 @@ _start:
 	bl	ppc405ep_init		/* do ppc405ep specific init */
 #endif /* CONFIG_405EP */
 
-#if defined(CFG_OCM_DATA_ADDR) && defined(CFG_OCM_DATA_SIZE)
+#if defined(CONFIG_SYS_OCM_DATA_ADDR) && defined(CONFIG_SYS_OCM_DATA_SIZE)
 #if defined(CONFIG_405EZ)
 	/********************************************************************
 	 * Setup OCM - On Chip Memory - PPC405EZ uses OCM Controller V2
 	 *******************************************************************/
 	/*
 	 * We can map the OCM on the PLB3, so map it at
-	 * CFG_OCM_DATA_ADDR + 0x8000
+	 * CONFIG_SYS_OCM_DATA_ADDR + 0x8000
 	 */
-	lis	r3,CFG_OCM_DATA_ADDR@h	/* OCM location */
-	ori	r3,r3,CFG_OCM_DATA_ADDR@l
+	lis	r3,CONFIG_SYS_OCM_DATA_ADDR@h	/* OCM location */
+	ori	r3,r3,CONFIG_SYS_OCM_DATA_ADDR@l
 	ori	r3,r3,0x0270		/* 16K for Bank 1, R/W/Enable */
 	mtdcr	ocmplb3cr1,r3		/* Set PLB Access */
 	ori	r3,r3,0x4000		/* Add 0x4000 for bank 2 */
 	mtdcr	ocmplb3cr2,r3		/* Set PLB Access */
 	isync
 
-	lis	r3,CFG_OCM_DATA_ADDR@h	/* OCM location */
-	ori	r3,r3,CFG_OCM_DATA_ADDR@l
+	lis	r3,CONFIG_SYS_OCM_DATA_ADDR@h	/* OCM location */
+	ori	r3,r3,CONFIG_SYS_OCM_DATA_ADDR@l
 	ori	r3,r3,0x0270		/* 16K for Bank 1, R/W/Enable */
 	mtdcr	ocmdscr1, r3		/* Set Data Side */
 	mtdcr	ocmiscr1, r3		/* Set Instruction Side */
@@ -1003,8 +1019,8 @@ _start:
 	mtdcr	ocmdscntl, r4		/* set data-side IRAM config */
 	isync
 
-	lis	r3,CFG_OCM_DATA_ADDR@h	/* OCM location */
-	ori	r3,r3,CFG_OCM_DATA_ADDR@l
+	lis	r3,CONFIG_SYS_OCM_DATA_ADDR@h	/* OCM location */
+	ori	r3,r3,CONFIG_SYS_OCM_DATA_ADDR@l
 	mtdcr	ocmdsarc, r3
 	addis	r4, 0, 0xC000		/* OCM data area enabled */
 	mtdcr	ocmdscntl, r4
@@ -1015,26 +1031,26 @@ _start:
 	/*----------------------------------------------------------------------- */
 	/* Setup temporary stack in DCACHE or OCM if needed for SDRAM SPD. */
 	/*----------------------------------------------------------------------- */
-#ifdef CFG_INIT_DCACHE_CS
+#ifdef CONFIG_SYS_INIT_DCACHE_CS
 	li	r4, PBxAP
 	mtdcr	ebccfga, r4
-	lis	r4, CFG_INIT_DCACHE_PBxAR@h
-	ori	r4, r4, CFG_INIT_DCACHE_PBxAR@l
+	lis	r4, CONFIG_SYS_INIT_DCACHE_PBxAR@h
+	ori	r4, r4, CONFIG_SYS_INIT_DCACHE_PBxAR@l
 	mtdcr	ebccfgd, r4
 
 	addi	r4, 0, PBxCR
 	mtdcr	ebccfga, r4
-	lis	r4, CFG_INIT_DCACHE_PBxCR@h
-	ori	r4, r4, CFG_INIT_DCACHE_PBxCR@l
+	lis	r4, CONFIG_SYS_INIT_DCACHE_PBxCR@h
+	ori	r4, r4, CONFIG_SYS_INIT_DCACHE_PBxCR@l
 	mtdcr	ebccfgd, r4
 
 	/*
 	 * Enable the data cache for the 128MB storage access control region
-	 * at CFG_INIT_RAM_ADDR.
+	 * at CONFIG_SYS_INIT_RAM_ADDR.
 	 */
 	mfdccr	r4
-	oris	r4, r4, PPC_128MB_SACR_VALUE(CFG_INIT_RAM_ADDR)@h
-	ori	r4, r4, PPC_128MB_SACR_VALUE(CFG_INIT_RAM_ADDR)@l
+	oris	r4, r4, PPC_128MB_SACR_VALUE(CONFIG_SYS_INIT_RAM_ADDR)@h
+	ori	r4, r4, PPC_128MB_SACR_VALUE(CONFIG_SYS_INIT_RAM_ADDR)@l
 	mtdccr	r4
 
 	/*
@@ -1044,11 +1060,11 @@ _start:
 	 */
 	li	r0, 0
 
-	lis	r3, CFG_INIT_RAM_ADDR@h
-	ori	r3, r3, CFG_INIT_RAM_ADDR@l
+	lis	r3, CONFIG_SYS_INIT_RAM_ADDR@h
+	ori	r3, r3, CONFIG_SYS_INIT_RAM_ADDR@l
 
-	lis	r4, CFG_INIT_RAM_END@h
-	ori	r4, r4, CFG_INIT_RAM_END@l
+	lis	r4, CONFIG_SYS_INIT_RAM_END@h
+	ori	r4, r4, CONFIG_SYS_INIT_RAM_END@l
 
 	/*
 	 * Convert the size, in bytes, to the number of cache lines/blocks
@@ -1072,18 +1088,18 @@ _start:
 	 * Load the initial stack pointer and data area and convert the size,
 	 * in bytes, to the number of words to initialize to a known value.
 	 */
-	lis	r1, CFG_INIT_RAM_ADDR@h
-	ori	r1, r1, CFG_INIT_SP_OFFSET@l
+	lis	r1, CONFIG_SYS_INIT_RAM_ADDR@h
+	ori	r1, r1, CONFIG_SYS_INIT_SP_OFFSET@l
 
-	lis	r4, (CFG_INIT_RAM_END >> 2)@h
-	ori	r4, r4, (CFG_INIT_RAM_END >> 2)@l
+	lis	r4, (CONFIG_SYS_INIT_RAM_END >> 2)@h
+	ori	r4, r4, (CONFIG_SYS_INIT_RAM_END >> 2)@l
 	mtctr	r4
 
-	lis	r2, CFG_INIT_RAM_ADDR@h
-	ori	r2, r2, CFG_INIT_RAM_END@l
+	lis	r2, CONFIG_SYS_INIT_RAM_ADDR@h
+	ori	r2, r2, CONFIG_SYS_INIT_RAM_END@l
 
-	lis	r4, CFG_INIT_RAM_PATTERN@h
-	ori	r4, r4, CFG_INIT_RAM_PATTERN@l
+	lis	r4, CONFIG_SYS_INIT_RAM_PATTERN@h
+	ori	r4, r4, CONFIG_SYS_INIT_RAM_PATTERN@l
 
 ..stackloop:
 	stwu	r4, -4(r2)
@@ -1106,15 +1122,15 @@ _start:
 	stwu	r1, -8(r1)		/* Save back chain and move SP */
 	stw	r0, +12(r1)		/* Save return addr (underflow vect) */
 
-#elif defined(CFG_TEMP_STACK_OCM) && \
-	(defined(CFG_OCM_DATA_ADDR) && defined(CFG_OCM_DATA_SIZE))
+#elif defined(CONFIG_SYS_TEMP_STACK_OCM) && \
+	(defined(CONFIG_SYS_OCM_DATA_ADDR) && defined(CONFIG_SYS_OCM_DATA_SIZE))
 	/*
 	 * Stack in OCM.
 	 */
 
 	/* Set up Stack at top of OCM */
-	lis	r1, (CFG_INIT_RAM_ADDR + CFG_INIT_SP_OFFSET)@h
-	ori	r1, r1, (CFG_INIT_RAM_ADDR + CFG_INIT_SP_OFFSET)@l
+	lis	r1, (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)@h
+	ori	r1, r1, (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)@l
 
 	/* Set up a zeroized stack frame so that backtrace works right */
 	li	r0, 0
@@ -1130,7 +1146,7 @@ _start:
 	ori	r0, r0, RESET_VECTOR@l
 	stwu	r1, -8(r1)		/* Save back chain and move SP */
 	stw	r0, +12(r1)		/* Save return addr (underflow vect) */
-#endif /* CFG_INIT_DCACHE_CS */
+#endif /* CONFIG_SYS_INIT_DCACHE_CS */
 
 #ifdef CONFIG_NAND_SPL
 	bl	nand_boot_common	/* will not return */
@@ -1341,7 +1357,7 @@ in32r:
  */
 	.globl	relocate_code
 relocate_code:
-#if defined(CONFIG_4xx_DCACHE) || defined(CFG_INIT_DCACHE_CS)
+#if defined(CONFIG_4xx_DCACHE) || defined(CONFIG_SYS_INIT_DCACHE_CS)
 	/*
 	 * We need to flush the initial global data (gd_t) before the dcache
 	 * will be invalidated.
@@ -1354,10 +1370,10 @@ relocate_code:
 
 	/* Flush initial global data range */
 	mr	r3, r4
-	addi	r4, r4, CFG_GBL_DATA_SIZE@l
+	addi	r4, r4, CONFIG_SYS_GBL_DATA_SIZE@l
 	bl	flush_dcache_range
 
-#if defined(CFG_INIT_DCACHE_CS)
+#if defined(CONFIG_SYS_INIT_DCACHE_CS)
 	/*
 	 * Undo the earlier data cache set-up for the primordial stack and
 	 * data area. First, invalidate the data cache and then disable data
@@ -1366,19 +1382,19 @@ relocate_code:
 	 */
 
 	/* Invalidate the primordial stack and data area in cache */
-	lis	r3, CFG_INIT_RAM_ADDR@h
-	ori	r3, r3, CFG_INIT_RAM_ADDR@l
+	lis	r3, CONFIG_SYS_INIT_RAM_ADDR@h
+	ori	r3, r3, CONFIG_SYS_INIT_RAM_ADDR@l
 
-	lis	r4, CFG_INIT_RAM_END@h
-	ori	r4, r4, CFG_INIT_RAM_END@l
+	lis	r4, CONFIG_SYS_INIT_RAM_END@h
+	ori	r4, r4, CONFIG_SYS_INIT_RAM_END@l
 	add	r4, r4, r3
 
 	bl	invalidate_dcache_range
 
 	/* Disable cacheability for the region */
 	mfdccr	r3
-	lis     r4, ~PPC_128MB_SACR_VALUE(CFG_INIT_RAM_ADDR)@h
-	ori     r4, r4, ~PPC_128MB_SACR_VALUE(CFG_INIT_RAM_ADDR)@l
+	lis     r4, ~PPC_128MB_SACR_VALUE(CONFIG_SYS_INIT_RAM_ADDR)@h
+	ori     r4, r4, ~PPC_128MB_SACR_VALUE(CONFIG_SYS_INIT_RAM_ADDR)@l
 	and     r3, r3, r4
 	mtdccr  r3
 
@@ -1394,15 +1410,15 @@ relocate_code:
 	lis	r3, PBxCR_VAL@h
 	ori	r3, r3, PBxCR_VAL@l
 	mtdcr	ebccfgd, r3
-#endif /* defined(CFG_INIT_DCACHE_CS) */
+#endif /* defined(CONFIG_SYS_INIT_DCACHE_CS) */
 
 	/* Restore registers */
 	mr	r3, r9
 	mr	r4, r10
 	mr	r5, r11
-#endif /* defined(CONFIG_4xx_DCACHE) || defined(CFG_INIT_DCACHE_CS) */
+#endif /* defined(CONFIG_4xx_DCACHE) || defined(CONFIG_SYS_INIT_DCACHE_CS) */
 
-#ifdef CFG_INIT_RAM_DCACHE
+#ifdef CONFIG_SYS_INIT_RAM_DCACHE
 	/*
 	 * Unlock the previously locked d-cache
 	 */
@@ -1424,7 +1440,7 @@ relocate_code:
 	mtspr	dtv3,r6
 	msync
 	isync
-#endif /* CFG_INIT_RAM_DCACHE */
+#endif /* CONFIG_SYS_INIT_RAM_DCACHE */
 
 #if defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
     defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
@@ -1439,11 +1455,15 @@ relocate_code:
 	dccci	0,0			/* Invalidate data cache, now no longer our stack */
 	sync
 	isync
-#ifdef CFG_TLB_FOR_BOOT_FLASH
-	addi	r1,r0,CFG_TLB_FOR_BOOT_FLASH	/* Use defined TLB */
+
+	/* Clear all potential pending exceptions */
+	mfspr	r1,mcsr
+	mtspr	mcsr,r1
+#ifdef CONFIG_SYS_TLB_FOR_BOOT_FLASH
+	addi	r1,r0,CONFIG_SYS_TLB_FOR_BOOT_FLASH	/* Use defined TLB */
 #else
 	addi	r1,r0,0x0000		/* Default TLB entry is #0 */
-#endif /* CFG_TLB_FOR_BOOT_FLASH */
+#endif /* CONFIG_SYS_TLB_FOR_BOOT_FLASH */
 	tlbre	r0,r1,0x0002		/* Read contents */
 	ori	r0,r0,0x0c00		/* Or in the inhibit, write through bit */
 	tlbwe	r0,r1,0x0002		/* Save it out */
@@ -1455,8 +1475,8 @@ relocate_code:
 	mr	r10, r5		/* Save copy of Destination Address	*/
 
 	mr	r3,  r5				/* Destination Address	*/
-	lis	r4, CFG_MONITOR_BASE@h		/* Source      Address	*/
-	ori	r4, r4, CFG_MONITOR_BASE@l
+	lis	r4, CONFIG_SYS_MONITOR_BASE@h		/* Source      Address	*/
+	ori	r4, r4, CONFIG_SYS_MONITOR_BASE@l
 	lwz	r5, GOT(__init_end)
 	sub	r5, r5, r4
 	li	r6, L1_CACHE_BYTES		/* Cache Line Size	*/
@@ -1464,7 +1484,7 @@ relocate_code:
 	/*
 	 * Fix GOT pointer:
 	 *
-	 * New GOT-PTR = (old GOT-PTR - CFG_MONITOR_BASE) + Destination Address
+	 * New GOT-PTR = (old GOT-PTR - CONFIG_SYS_MONITOR_BASE) + Destination Address
 	 *
 	 * Offset:
 	 */
@@ -1775,74 +1795,74 @@ ppc405ep_init:
 
 	lis	r3,GPIO0_OSRH@h		/* config GPIO output select */
 	ori	r3,r3,GPIO0_OSRH@l
-	lis	r4,CFG_GPIO0_OSRH@h
-	ori	r4,r4,CFG_GPIO0_OSRH@l
+	lis	r4,CONFIG_SYS_GPIO0_OSRH@h
+	ori	r4,r4,CONFIG_SYS_GPIO0_OSRH@l
 	stw	r4,0(r3)
 	lis	r3,GPIO0_OSRL@h
 	ori	r3,r3,GPIO0_OSRL@l
-	lis	r4,CFG_GPIO0_OSRL@h
-	ori	r4,r4,CFG_GPIO0_OSRL@l
+	lis	r4,CONFIG_SYS_GPIO0_OSRL@h
+	ori	r4,r4,CONFIG_SYS_GPIO0_OSRL@l
 	stw	r4,0(r3)
 
 	lis	r3,GPIO0_ISR1H@h	/* config GPIO input select */
 	ori	r3,r3,GPIO0_ISR1H@l
-	lis	r4,CFG_GPIO0_ISR1H@h
-	ori	r4,r4,CFG_GPIO0_ISR1H@l
+	lis	r4,CONFIG_SYS_GPIO0_ISR1H@h
+	ori	r4,r4,CONFIG_SYS_GPIO0_ISR1H@l
 	stw	r4,0(r3)
 	lis	r3,GPIO0_ISR1L@h
 	ori	r3,r3,GPIO0_ISR1L@l
-	lis	r4,CFG_GPIO0_ISR1L@h
-	ori	r4,r4,CFG_GPIO0_ISR1L@l
+	lis	r4,CONFIG_SYS_GPIO0_ISR1L@h
+	ori	r4,r4,CONFIG_SYS_GPIO0_ISR1L@l
 	stw	r4,0(r3)
 
 	lis	r3,GPIO0_TSRH@h		/* config GPIO three-state select */
 	ori	r3,r3,GPIO0_TSRH@l
-	lis	r4,CFG_GPIO0_TSRH@h
-	ori	r4,r4,CFG_GPIO0_TSRH@l
+	lis	r4,CONFIG_SYS_GPIO0_TSRH@h
+	ori	r4,r4,CONFIG_SYS_GPIO0_TSRH@l
 	stw	r4,0(r3)
 	lis	r3,GPIO0_TSRL@h
 	ori	r3,r3,GPIO0_TSRL@l
-	lis	r4,CFG_GPIO0_TSRL@h
-	ori	r4,r4,CFG_GPIO0_TSRL@l
+	lis	r4,CONFIG_SYS_GPIO0_TSRL@h
+	ori	r4,r4,CONFIG_SYS_GPIO0_TSRL@l
 	stw	r4,0(r3)
 
 	lis	r3,GPIO0_TCR@h		/* config GPIO driver output enables */
 	ori	r3,r3,GPIO0_TCR@l
-	lis	r4,CFG_GPIO0_TCR@h
-	ori	r4,r4,CFG_GPIO0_TCR@l
+	lis	r4,CONFIG_SYS_GPIO0_TCR@h
+	ori	r4,r4,CONFIG_SYS_GPIO0_TCR@l
 	stw	r4,0(r3)
 
 	li	r3,pb1ap		/* program EBC bank 1 for RTC access */
 	mtdcr	ebccfga,r3
-	lis	r3,CFG_EBC_PB1AP@h
-	ori	r3,r3,CFG_EBC_PB1AP@l
+	lis	r3,CONFIG_SYS_EBC_PB1AP@h
+	ori	r3,r3,CONFIG_SYS_EBC_PB1AP@l
 	mtdcr	ebccfgd,r3
 	li	r3,pb1cr
 	mtdcr	ebccfga,r3
-	lis	r3,CFG_EBC_PB1CR@h
-	ori	r3,r3,CFG_EBC_PB1CR@l
+	lis	r3,CONFIG_SYS_EBC_PB1CR@h
+	ori	r3,r3,CONFIG_SYS_EBC_PB1CR@l
 	mtdcr	ebccfgd,r3
 
 	li	r3,pb1ap		/* program EBC bank 1 for RTC access */
 	mtdcr	ebccfga,r3
-	lis	r3,CFG_EBC_PB1AP@h
-	ori	r3,r3,CFG_EBC_PB1AP@l
+	lis	r3,CONFIG_SYS_EBC_PB1AP@h
+	ori	r3,r3,CONFIG_SYS_EBC_PB1AP@l
 	mtdcr	ebccfgd,r3
 	li	r3,pb1cr
 	mtdcr	ebccfga,r3
-	lis	r3,CFG_EBC_PB1CR@h
-	ori	r3,r3,CFG_EBC_PB1CR@l
+	lis	r3,CONFIG_SYS_EBC_PB1CR@h
+	ori	r3,r3,CONFIG_SYS_EBC_PB1CR@l
 	mtdcr	ebccfgd,r3
 
 	li	r3,pb4ap		/* program EBC bank 4 for FPGA access */
 	mtdcr	ebccfga,r3
-	lis	r3,CFG_EBC_PB4AP@h
-	ori	r3,r3,CFG_EBC_PB4AP@l
+	lis	r3,CONFIG_SYS_EBC_PB4AP@h
+	ori	r3,r3,CONFIG_SYS_EBC_PB4AP@l
 	mtdcr	ebccfgd,r3
 	li	r3,pb4cr
 	mtdcr	ebccfga,r3
-	lis	r3,CFG_EBC_PB4CR@h
-	ori	r3,r3,CFG_EBC_PB4CR@l
+	lis	r3,CONFIG_SYS_EBC_PB4CR@h
+	ori	r3,r3,CONFIG_SYS_EBC_PB4CR@l
 	mtdcr	ebccfgd,r3
 #endif
 
@@ -2111,20 +2131,20 @@ nand_boot_common:
 	 * First initialize SDRAM. It has to be available *before* calling
 	 * nand_boot().
 	 */
-	lis	r3,CFG_SDRAM_BASE@h
-	ori	r3,r3,CFG_SDRAM_BASE@l
+	lis	r3,CONFIG_SYS_SDRAM_BASE@h
+	ori	r3,r3,CONFIG_SYS_SDRAM_BASE@l
 	bl	initdram
 
 	/*
 	 * Now copy the 4k SPL code into SDRAM and continue execution
 	 * from there.
 	 */
-	lis	r3,CFG_NAND_BOOT_SPL_DST@h
-	ori	r3,r3,CFG_NAND_BOOT_SPL_DST@l
-	lis	r4,CFG_NAND_BOOT_SPL_SRC@h
-	ori	r4,r4,CFG_NAND_BOOT_SPL_SRC@l
-	lis	r5,CFG_NAND_BOOT_SPL_SIZE@h
-	ori	r5,r5,CFG_NAND_BOOT_SPL_SIZE@l
+	lis	r3,CONFIG_SYS_NAND_BOOT_SPL_DST@h
+	ori	r3,r3,CONFIG_SYS_NAND_BOOT_SPL_DST@l
+	lis	r4,CONFIG_SYS_NAND_BOOT_SPL_SRC@h
+	ori	r4,r4,CONFIG_SYS_NAND_BOOT_SPL_SRC@l
+	lis	r5,CONFIG_SYS_NAND_BOOT_SPL_SIZE@h
+	ori	r5,r5,CONFIG_SYS_NAND_BOOT_SPL_SIZE@l
 	bl	nand_boot_relocate
 
 	/*
diff --git a/cpu/ppc4xx/usb.c b/cpu/ppc4xx/usb.c
index cb8d5c7d3..592efe70a 100644
--- a/cpu/ppc4xx/usb.c
+++ b/cpu/ppc4xx/usb.c
@@ -23,7 +23,7 @@
 
 #include <common.h>
 
-#if defined(CONFIG_USB_OHCI_NEW) && defined(CFG_USB_OHCI_CPU_INIT)
+#if defined(CONFIG_USB_OHCI_NEW) && defined(CONFIG_SYS_USB_OHCI_CPU_INIT)
 
 #ifdef CONFIG_4xx_DCACHE
 #include <asm/mmu.h>
@@ -63,4 +63,4 @@ int usb_cpu_init_fail(void)
 	return 0;
 }
 
-#endif /* defined(CONFIG_USB_OHCI) && defined(CFG_USB_OHCI_CPU_INIT) */
+#endif /* defined(CONFIG_USB_OHCI) && defined(CONFIG_SYS_USB_OHCI_CPU_INIT) */
diff --git a/cpu/ppc4xx/usb_ohci.c b/cpu/ppc4xx/usb_ohci.c
index 5dbd84227..2607ed650 100644
--- a/cpu/ppc4xx/usb_ohci.c
+++ b/cpu/ppc4xx/usb_ohci.c
@@ -660,7 +660,7 @@ static void td_fill (ohci_t *ohci, unsigned int info,
 	td->index = index;
 	td->data = (__u32)data;
 #ifdef OHCI_FILL_TRACE
-	if ((usb_pipetype(urb_priv->pipe) == PIPE_BULK) && usb_pipeout(urb_priv->pipe)) {
+	if (usb_pipebulk(urb_priv->pipe) && usb_pipeout(urb_priv->pipe)) {
 		for (i = 0; i < len; i++)
 		printf("td->data[%d] %#2x ",i, ((unsigned char *)td->data)[i]);
 		printf("\n");
@@ -761,7 +761,7 @@ static void dl_transfer_length(td_t * td)
 	tdCBP  = ohci_cpu_to_le32 (td->hwCBP);
 
 
-	if (!(usb_pipetype (lurb_priv->pipe) == PIPE_CONTROL &&
+	if (!(usb_pipecontrol(lurb_priv->pipe) &&
 	    ((td->index == 0) || (td->index == lurb_priv->length - 1)))) {
 		if (tdBE != 0) {
 			if (td->hwCBP == 0)
@@ -1023,7 +1023,7 @@ static int ohci_submit_rh_msg(struct usb_device *dev, unsigned long pipe,
 urb_priv.actual_length = 0;
 pkt_print(dev, pipe, buffer, transfer_len, cmd, "SUB(rh)", usb_pipein(pipe));
 #endif
-	if ((pipe & PIPE_INTERRUPT) == PIPE_INTERRUPT) {
+	if (usb_pipeint(pipe)) {
 		info("Root-Hub submit IRQ: NOT implemented");
 		return 0;
 	}
@@ -1248,7 +1248,7 @@ int submit_common_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
 
 	/* allow more time for a BULK device to react - some are slow */
 #define BULK_TO	 5000	/* timeout in milliseconds */
-	if (usb_pipetype (pipe) == PIPE_BULK)
+	if (usb_pipebulk(pipe))
 		timeout = BULK_TO;
 	else
 		timeout = 100;
@@ -1600,9 +1600,9 @@ int usb_lowlevel_init(void)
 	gohci.sleeping = 0;
 	gohci.irq = -1;
 #if defined(CONFIG_440EP)
-	gohci.regs = (struct ohci_regs *)(CFG_PERIPHERAL_BASE | 0x1000);
-#elif defined(CONFIG_440EPX) || defined(CFG_USB_HOST)
-	gohci.regs = (struct ohci_regs *)(CFG_USB_HOST);
+	gohci.regs = (struct ohci_regs *)(CONFIG_SYS_PERIPHERAL_BASE | 0x1000);
+#elif defined(CONFIG_440EPX) || defined(CONFIG_SYS_USB_HOST)
+	gohci.regs = (struct ohci_regs *)(CONFIG_SYS_USB_HOST);
 #endif
 
 	gohci.flags = 0;
diff --git a/cpu/ppc4xx/usbdev.h b/cpu/ppc4xx/usbdev.h
index 3446d9893..ef6a2da64 100644
--- a/cpu/ppc4xx/usbdev.h
+++ b/cpu/ppc4xx/usbdev.h
@@ -1,31 +1,31 @@
 #include <config.h>
 
 /*Common Registers*/
-#define USB2D0_INTRIN_16   (CFG_USB_DEVICE | 0x100)
-#define USB2D0_POWER_8     (CFG_USB_DEVICE | 0x102)
-#define USB2D0_FADDR_8     (CFG_USB_DEVICE | 0x103)
-#define USB2D0_INTRINE_16  (CFG_USB_DEVICE | 0x104)
-#define USB2D0_INTROUT_16  (CFG_USB_DEVICE | 0x106)
-#define USB2D0_INTRUSBE_8  (CFG_USB_DEVICE | 0x108)
-#define USB2D0_INTRUSB_8   (CFG_USB_DEVICE | 0x109)
-#define USB2D0_INTROUTE_16 (CFG_USB_DEVICE | 0x10a)
-#define USB2D0_TSTMODE_8   (CFG_USB_DEVICE | 0x10c)
-#define USB2D0_INDEX_8     (CFG_USB_DEVICE | 0x10d)
-#define USB2D0_FRAME_16    (CFG_USB_DEVICE | 0x10e)
+#define USB2D0_INTRIN_16   (CONFIG_SYS_USB_DEVICE | 0x100)
+#define USB2D0_POWER_8     (CONFIG_SYS_USB_DEVICE | 0x102)
+#define USB2D0_FADDR_8     (CONFIG_SYS_USB_DEVICE | 0x103)
+#define USB2D0_INTRINE_16  (CONFIG_SYS_USB_DEVICE | 0x104)
+#define USB2D0_INTROUT_16  (CONFIG_SYS_USB_DEVICE | 0x106)
+#define USB2D0_INTRUSBE_8  (CONFIG_SYS_USB_DEVICE | 0x108)
+#define USB2D0_INTRUSB_8   (CONFIG_SYS_USB_DEVICE | 0x109)
+#define USB2D0_INTROUTE_16 (CONFIG_SYS_USB_DEVICE | 0x10a)
+#define USB2D0_TSTMODE_8   (CONFIG_SYS_USB_DEVICE | 0x10c)
+#define USB2D0_INDEX_8     (CONFIG_SYS_USB_DEVICE | 0x10d)
+#define USB2D0_FRAME_16    (CONFIG_SYS_USB_DEVICE | 0x10e)
 
 /*Indexed Registers*/
-#define USB2D0_INCSR0_8    (CFG_USB_DEVICE | 0x110)
-#define USB2D0_INCSR_16    (CFG_USB_DEVICE | 0x110)
-#define USB2D0_INMAXP_16   (CFG_USB_DEVICE | 0x112)
-#define USB2D0_OUTCSR_16   (CFG_USB_DEVICE | 0x114)
-#define USB2D0_OUTMAXP_16  (CFG_USB_DEVICE | 0x116)
-#define USB2D0_OUTCOUNT0_8 (CFG_USB_DEVICE | 0x11a)
-#define USB2D0_OUTCOUNT_16 (CFG_USB_DEVICE | 0x11a)
+#define USB2D0_INCSR0_8    (CONFIG_SYS_USB_DEVICE | 0x110)
+#define USB2D0_INCSR_16    (CONFIG_SYS_USB_DEVICE | 0x110)
+#define USB2D0_INMAXP_16   (CONFIG_SYS_USB_DEVICE | 0x112)
+#define USB2D0_OUTCSR_16   (CONFIG_SYS_USB_DEVICE | 0x114)
+#define USB2D0_OUTMAXP_16  (CONFIG_SYS_USB_DEVICE | 0x116)
+#define USB2D0_OUTCOUNT0_8 (CONFIG_SYS_USB_DEVICE | 0x11a)
+#define USB2D0_OUTCOUNT_16 (CONFIG_SYS_USB_DEVICE | 0x11a)
 
 /*FIFOs*/
-#define USB2D0_FIFO_0 (CFG_USB_DEVICE | 0x120)
-#define USB2D0_FIFO_1 (CFG_USB_DEVICE | 0x124)
-#define USB2D0_FIFO_2 (CFG_USB_DEVICE | 0x128)
-#define USB2D0_FIFO_3 (CFG_USB_DEVICE | 0x12c)
+#define USB2D0_FIFO_0 (CONFIG_SYS_USB_DEVICE | 0x120)
+#define USB2D0_FIFO_1 (CONFIG_SYS_USB_DEVICE | 0x124)
+#define USB2D0_FIFO_2 (CONFIG_SYS_USB_DEVICE | 0x128)
+#define USB2D0_FIFO_3 (CONFIG_SYS_USB_DEVICE | 0x12c)
 
 void usb_dev_init(void);
diff --git a/cpu/pxa/config.mk b/cpu/pxa/config.mk
index f0b86b7dc..af910e2f6 100644
--- a/cpu/pxa/config.mk
+++ b/cpu/pxa/config.mk
@@ -32,4 +32,5 @@ PLATFORM_CPPFLAGS += -march=armv5te -mtune=xscale
 #
 # ========================================================================
 PLATFORM_CPPFLAGS +=$(call cc-option,-mapcs-32,-mabi=apcs-gnu)
+PLATFORM_CPPFLAGS +=$(call cc-option,-mno-thumb-interwork,)
 PLATFORM_RELFLAGS +=$(call cc-option,-mshort-load-bytes,$(call cc-option,-malignment-traps,))
diff --git a/cpu/pxa/cpu.c b/cpu/pxa/cpu.c
index 0ee818036..e84cb5b15 100644
--- a/cpu/pxa/cpu.c
+++ b/cpu/pxa/cpu.c
@@ -44,7 +44,7 @@ int cpu_init (void)
 	 * setup up stacks if necessary
 	 */
 #ifdef CONFIG_USE_IRQ
-	IRQ_STACK_START = _armboot_start - CFG_MALLOC_LEN - CFG_GBL_DATA_SIZE - 4;
+	IRQ_STACK_START = _armboot_start - CONFIG_SYS_MALLOC_LEN - CONFIG_SYS_GBL_DATA_SIZE - 4;
 	FIQ_STACK_START = IRQ_STACK_START - CONFIG_STACKSIZE_IRQ;
 #endif
 	return 0;
diff --git a/cpu/pxa/i2c.c b/cpu/pxa/i2c.c
index df537c435..6b72ba13a 100644
--- a/cpu/pxa/i2c.c
+++ b/cpu/pxa/i2c.c
@@ -37,7 +37,7 @@
 #ifdef CONFIG_HARD_I2C
 
 /*
- *	- CFG_I2C_SPEED
+ *	- CONFIG_SYS_I2C_SPEED
  *	- I2C_PXA_SLAVE_ADDR
  */
 
@@ -48,7 +48,7 @@
 /*#define	DEBUG_I2C	1	/###* activate local debugging output  */
 #define I2C_PXA_SLAVE_ADDR	0x1	/* slave pxa unit address           */
 
-#if (CFG_I2C_SPEED == 400000)
+#if (CONFIG_SYS_I2C_SPEED == 400000)
 #define I2C_ICR_INIT	(ICR_FM | ICR_BEIE | ICR_IRFIE | ICR_ITEIE | ICR_GCD | ICR_SCLE)
 #else
 #define I2C_ICR_INIT	(ICR_BEIE | ICR_IRFIE | ICR_ITEIE | ICR_GCD | ICR_SCLE)
@@ -254,7 +254,7 @@ i2c_transfer_finish:
 
 void i2c_init(int speed, int slaveaddr)
 {
-#ifdef CFG_I2C_INIT_BOARD
+#ifdef CONFIG_SYS_I2C_INIT_BOARD
 	/* call board specific i2c bus reset routine before accessing the   */
 	/* environment, which might be in a chip on that bus. For details   */
 	/* about this problem see doc/I2C_Edge_Conditions.                  */
@@ -329,7 +329,7 @@ int i2c_read(uchar chip, uint addr, int alen, uchar *buffer, int len)
 	 * send memory address bytes;
 	 * alen defines how much bytes we have to send.
 	 */
-	/*addr &= ((1 << CFG_EEPROM_PAGE_WRITE_BITS)-1); */
+	/*addr &= ((1 << CONFIG_SYS_EEPROM_PAGE_WRITE_BITS)-1); */
 	addr_bytes[0] = (u8)((addr >>  0) & 0x000000FF);
 	addr_bytes[1] = (u8)((addr >>  8) & 0x000000FF);
 	addr_bytes[2] = (u8)((addr >> 16) & 0x000000FF);
@@ -455,19 +455,4 @@ int i2c_write(uchar chip, uint addr, int alen, uchar *buffer, int len)
 
 }
 
-uchar i2c_reg_read (uchar chip, uchar reg)
-{
-	uchar buf;
-
-	PRINTD(("i2c_reg_read(chip=0x%02x, reg=0x%02x)\n",chip,reg));
-	i2c_read(chip, reg, 1, &buf, 1);
-	return (buf);
-}
-
-void  i2c_reg_write(uchar chip, uchar reg, uchar val)
-{
-	PRINTD(("i2c_reg_write(chip=0x%02x, reg=0x%02x, val=0x%02x)\n",chip,reg,val));
-	i2c_write(chip, reg, 1, &val, 1);
-}
-
 #endif	/* CONFIG_HARD_I2C */
diff --git a/cpu/pxa/interrupts.c b/cpu/pxa/interrupts.c
index 8b577e135..ec8fb9e3d 100644
--- a/cpu/pxa/interrupts.c
+++ b/cpu/pxa/interrupts.c
@@ -78,10 +78,10 @@ void udelay_masked (unsigned long usec)
 
 	if (usec >= 1000) {
 		tmo = usec / 1000;
-		tmo *= CFG_HZ;
+		tmo *= CONFIG_SYS_HZ;
 		tmo /= 1000;
 	} else {
-		tmo = usec * CFG_HZ;
+		tmo = usec * CONFIG_SYS_HZ;
 		tmo /= (1000*1000);
 	}
 
@@ -109,6 +109,6 @@ unsigned long long get_ticks(void)
 ulong get_tbclk (void)
 {
 	ulong tbclk;
-	tbclk = CFG_HZ;
+	tbclk = CONFIG_SYS_HZ;
 	return tbclk;
 }
diff --git a/cpu/pxa/mmc.c b/cpu/pxa/mmc.c
index 121dcbe13..d735c8d48 100644
--- a/cpu/pxa/mmc.c
+++ b/cpu/pxa/mmc.c
@@ -234,7 +234,7 @@ mmc_read(ulong src, uchar * dst, int size)
 	mmc_block_size = MMC_BLOCK_SIZE;
 	mmc_block_address = ~(mmc_block_size - 1);
 
-	src -= CFG_MMC_BASE;
+	src -= CONFIG_SYS_MMC_BASE;
 	end = src + size;
 	part_start = ~mmc_block_address & src;
 	part_end = ~mmc_block_address & end;
@@ -310,7 +310,7 @@ mmc_write(uchar * src, ulong dst, int size)
 	mmc_block_size = MMC_BLOCK_SIZE;
 	mmc_block_address = ~(mmc_block_size - 1);
 
-	dst -= CFG_MMC_BASE;
+	dst -= CONFIG_SYS_MMC_BASE;
 	end = dst + size;
 	part_start = ~mmc_block_address & dst;
 	part_end = ~mmc_block_address & end;
@@ -379,7 +379,7 @@ mmc_bread(int dev_num, ulong blknr, lbaint_t blkcnt, void *dst)
 /****************************************************/
 {
 	int mmc_block_size = MMC_BLOCK_SIZE;
-	ulong src = blknr * mmc_block_size + CFG_MMC_BASE;
+	ulong src = blknr * mmc_block_size + CONFIG_SYS_MMC_BASE;
 
 	mmc_read(src, (uchar *) dst, blkcnt * mmc_block_size);
 	return blkcnt;
@@ -575,8 +575,8 @@ mmc_init(int verbose)
 			break;
 		}
 
-		/* Select 3.2-3.3 and 3.3-3.4V */
-		resp = mmc_cmd(SD_CMD_APP_SEND_OP_COND, 0x0020, 0,
+		/* Select 3.2-3.3V and 3.3-3.4V */
+		resp = mmc_cmd(SD_CMD_APP_SEND_OP_COND, 0x0030, 0x0000,
 				MMC_CMDAT_R3 | (retries < 2 ? 0
 					: MMC_CMDAT_INIT));
 		if (resp[0] & 0x80000000) {
@@ -652,8 +652,8 @@ int mmc_ident(block_dev_desc_t * dev)
 
 int mmc2info(ulong addr)
 {
-	if (addr >= CFG_MMC_BASE
-	    && addr < CFG_MMC_BASE + (mmc_dev.lba * mmc_dev.blksz)) {
+	if (addr >= CONFIG_SYS_MMC_BASE
+	    && addr < CONFIG_SYS_MMC_BASE + (mmc_dev.lba * mmc_dev.blksz)) {
 		return 1;
 	}
 	return 0;
diff --git a/cpu/pxa/pxafb.c b/cpu/pxa/pxafb.c
index b2caa73c6..97efcb6df 100644
--- a/cpu/pxa/pxafb.c
+++ b/cpu/pxa/pxafb.c
@@ -60,11 +60,11 @@ vidinfo_t panel_info = {
 	vl_row:		480,
 	vl_width:	640,
 	vl_height:	480,
-	vl_clkp:	CFG_HIGH,
-	vl_oep:		CFG_HIGH,
-	vl_hsp:		CFG_HIGH,
-	vl_vsp:		CFG_HIGH,
-	vl_dp:		CFG_HIGH,
+	vl_clkp:	CONFIG_SYS_HIGH,
+	vl_oep:		CONFIG_SYS_HIGH,
+	vl_hsp:		CONFIG_SYS_HIGH,
+	vl_vsp:		CONFIG_SYS_HIGH,
+	vl_dp:		CONFIG_SYS_HIGH,
 	vl_bpix:	LCD_BPP,
 	vl_lbw:		0,
 	vl_splt:	0,
@@ -94,11 +94,11 @@ vidinfo_t panel_info = {
 	vl_row:		480,
 	vl_width:	157,
 	vl_height:	118,
-	vl_clkp:	CFG_HIGH,
-	vl_oep:		CFG_HIGH,
-	vl_hsp:		CFG_HIGH,
-	vl_vsp:		CFG_HIGH,
-	vl_dp:		CFG_HIGH,
+	vl_clkp:	CONFIG_SYS_HIGH,
+	vl_oep:		CONFIG_SYS_HIGH,
+	vl_hsp:		CONFIG_SYS_HIGH,
+	vl_vsp:		CONFIG_SYS_HIGH,
+	vl_dp:		CONFIG_SYS_HIGH,
 	vl_bpix:	LCD_BPP,
 	vl_lbw:		0,
 	vl_splt:	1,
@@ -127,11 +127,11 @@ vidinfo_t panel_info = {
 	vl_row:		240,
 	vl_width:	167,
 	vl_height:	109,
-	vl_clkp:	CFG_HIGH,
-	vl_oep:		CFG_HIGH,
-	vl_hsp:		CFG_HIGH,
-	vl_vsp:		CFG_HIGH,
-	vl_dp:		CFG_HIGH,
+	vl_clkp:	CONFIG_SYS_HIGH,
+	vl_oep:		CONFIG_SYS_HIGH,
+	vl_hsp:		CONFIG_SYS_HIGH,
+	vl_vsp:		CONFIG_SYS_HIGH,
+	vl_dp:		CONFIG_SYS_HIGH,
 	vl_bpix:	LCD_BPP,
 	vl_lbw:		1,
 	vl_splt:	0,
diff --git a/cpu/pxa/start.S b/cpu/pxa/start.S
index 23005e20f..63ab0c591 100644
--- a/cpu/pxa/start.S
+++ b/cpu/pxa/start.S
@@ -135,8 +135,8 @@ copy_loop:
 	/* Set up the stack						    */
 stack_setup:
 	ldr	r0, _TEXT_BASE		/* upper 128 KiB: relocated uboot   */
-	sub	r0, r0, #CFG_MALLOC_LEN /* malloc area			    */
-	sub	r0, r0, #CFG_GBL_DATA_SIZE /* bdinfo			    */
+	sub	r0, r0, #CONFIG_SYS_MALLOC_LEN /* malloc area			    */
+	sub	r0, r0, #CONFIG_SYS_GBL_DATA_SIZE /* bdinfo			    */
 #ifdef CONFIG_USE_IRQ
 	sub	r0, r0, #(CONFIG_STACKSIZE_IRQ+CONFIG_STACKSIZE_FIQ)
 #endif /* CONFIG_USE_IRQ */
@@ -191,20 +191,20 @@ OSTIMER_BASE:	.word	0x40a00000
 
 /* Clock Manager Registers						    */
 #ifdef CONFIG_CPU_MONAHANS
-# ifndef CFG_MONAHANS_RUN_MODE_OSC_RATIO
-#  error "You have to define CFG_MONAHANS_RUN_MODE_OSC_RATIO!!"
-# endif /* !CFG_MONAHANS_RUN_MODE_OSC_RATIO */
-# ifndef CFG_MONAHANS_TURBO_RUN_MODE_RATIO
-#  define CFG_MONAHANS_TURBO_RUN_MODE_RATIO 0x1
-# endif /* !CFG_MONAHANS_TURBO_RUN_MODE_RATIO */
+# ifndef CONFIG_SYS_MONAHANS_RUN_MODE_OSC_RATIO
+#  error "You have to define CONFIG_SYS_MONAHANS_RUN_MODE_OSC_RATIO!!"
+# endif /* !CONFIG_SYS_MONAHANS_RUN_MODE_OSC_RATIO */
+# ifndef CONFIG_SYS_MONAHANS_TURBO_RUN_MODE_RATIO
+#  define CONFIG_SYS_MONAHANS_TURBO_RUN_MODE_RATIO 0x1
+# endif /* !CONFIG_SYS_MONAHANS_TURBO_RUN_MODE_RATIO */
 #else /* !CONFIG_CPU_MONAHANS */
-#ifdef CFG_CPUSPEED
+#ifdef CONFIG_SYS_CPUSPEED
 CC_BASE:	.word	0x41300000
 #define CCCR	0x00
-cpuspeed:	.word	CFG_CPUSPEED
-#else /* !CFG_CPUSPEED */
-#error "You have to define CFG_CPUSPEED!!"
-#endif /* CFG_CPUSPEED */
+cpuspeed:	.word	CONFIG_SYS_CPUSPEED
+#else /* !CONFIG_SYS_CPUSPEED */
+#error "You have to define CONFIG_SYS_CPUSPEED!!"
+#endif /* CONFIG_SYS_CPUSPEED */
 #endif /* CONFIG_CPU_MONAHANS */
 
 	/* takes care the CP15 update has taken place */
@@ -245,10 +245,10 @@ cpu_init_crit:
 	/* set clock speed */
 #ifdef CONFIG_CPU_MONAHANS
 	ldr	r0, =ACCR
-	ldr	r1, =(((CFG_MONAHANS_TURBO_RUN_MODE_RATIO<<8) & ACCR_XN_MASK) | (CFG_MONAHANS_RUN_MODE_OSC_RATIO & ACCR_XL_MASK))
+	ldr	r1, =(((CONFIG_SYS_MONAHANS_TURBO_RUN_MODE_RATIO<<8) & ACCR_XN_MASK) | (CONFIG_SYS_MONAHANS_RUN_MODE_OSC_RATIO & ACCR_XL_MASK))
 	str	r1, [r0]
 #else /* !CONFIG_CPU_MONAHANS */
-#ifdef CFG_CPUSPEED
+#ifdef CONFIG_SYS_CPUSPEED
 	ldr	r0, CC_BASE
 	ldr	r1, cpuspeed
 	str	r1, [r0, #CCCR]
@@ -257,7 +257,7 @@ cpu_init_crit:
 
 setspeed_done:
 
-#endif /* CFG_CPUSPEED */
+#endif /* CONFIG_SYS_CPUSPEED */
 #endif /* CONFIG_CPU_MONAHANS */
 
 	/*
@@ -336,8 +336,8 @@ setspeed_done:
 	add	r8, sp, #S_PC
 
 	ldr	r2, _armboot_start
-	sub	r2, r2, #(CONFIG_STACKSIZE+CFG_MALLOC_LEN)
-	sub	r2, r2, #(CFG_GBL_DATA_SIZE+8)	@ set base 2 words into abort stack
+	sub	r2, r2, #(CONFIG_STACKSIZE+CONFIG_SYS_MALLOC_LEN)
+	sub	r2, r2, #(CONFIG_SYS_GBL_DATA_SIZE+8)	@ set base 2 words into abort stack
 	ldmia	r2, {r2 - r4}			/* get pc, cpsr, old_r0	    */
 	add	r0, sp, #S_FRAME_SIZE		/* restore sp_SVC	    */
 
@@ -373,8 +373,8 @@ setspeed_done:
 
 	.macro get_bad_stack
 	ldr	r13, _armboot_start		@ setup our mode stack
-	sub	r13, r13, #(CONFIG_STACKSIZE+CFG_MALLOC_LEN)
-	sub	r13, r13, #(CFG_GBL_DATA_SIZE+8) @ reserved a couple spots in abort stack
+	sub	r13, r13, #(CONFIG_STACKSIZE+CONFIG_SYS_MALLOC_LEN)
+	sub	r13, r13, #(CONFIG_SYS_GBL_DATA_SIZE+8) @ reserved a couple spots in abort stack
 
 	str	lr, [r13]			@ save caller lr / spsr
 	mrs	lr, spsr
diff --git a/cpu/pxa/usb.c b/cpu/pxa/usb.c
index aa6f4b7b9..bd718a6ff 100644
--- a/cpu/pxa/usb.c
+++ b/cpu/pxa/usb.c
@@ -23,7 +23,7 @@
 
 #include <common.h>
 
-#if defined(CONFIG_USB_OHCI_NEW) && defined(CFG_USB_OHCI_CPU_INIT)
+#if defined(CONFIG_USB_OHCI_NEW) && defined(CONFIG_SYS_USB_OHCI_CPU_INIT)
 # if defined(CONFIG_CPU_MONAHANS) || defined(CONFIG_PXA27X)
 
 #include <asm/arch/pxa-regs.h>
@@ -109,4 +109,4 @@ int usb_cpu_init_fail(void)
 }
 
 # endif /* defined(CONFIG_CPU_MONAHANS) || defined(CONFIG_PXA27X) */
-#endif /* defined(CONFIG_USB_OHCI) && defined(CFG_USB_OHCI_CPU_INIT) */
+#endif /* defined(CONFIG_USB_OHCI) && defined(CONFIG_SYS_USB_OHCI_CPU_INIT) */
diff --git a/cpu/s3c44b0/config.mk b/cpu/s3c44b0/config.mk
index 6dc9c463a..01e7040d6 100644
--- a/cpu/s3c44b0/config.mk
+++ b/cpu/s3c44b0/config.mk
@@ -32,4 +32,5 @@ PLATFORM_CPPFLAGS += -march=armv4 -mtune=arm7tdmi -msoft-float
 #
 # ========================================================================
 PLATFORM_CPPFLAGS +=$(call cc-option,-mapcs-32,-mabi=apcs-gnu)
+PLATFORM_CPPFLAGS +=$(call cc-option,-mno-thumb-interwork,)
 PLATFORM_RELFLAGS +=$(call cc-option,-mshort-load-bytes,$(call cc-option,-malignment-traps,))
diff --git a/cpu/s3c44b0/cpu.c b/cpu/s3c44b0/cpu.c
index eae6adbc0..2960f2f3a 100644
--- a/cpu/s3c44b0/cpu.c
+++ b/cpu/s3c44b0/cpu.c
@@ -188,7 +188,7 @@ int rtc_get (struct rtc_time* tm)
 	return 0;
 }
 
-void rtc_set (struct rtc_time* tm)
+int rtc_set (struct rtc_time* tm)
 {
 	if(tm->tm_year < 2000)
 		tm->tm_year -= 1900;
@@ -204,6 +204,8 @@ void rtc_set (struct rtc_time* tm)
 	BCDMIN = HEX2BCD(tm->tm_min);
 	BCDSEC = HEX2BCD(tm->tm_sec);
 	RTCCON &= 1;
+
+	return 0;
 }
 
 void rtc_reset (void)
@@ -254,7 +256,7 @@ void i2c_init(int speed, int slaveaddr)
 
 	/*
 		Enable ACK, IICCLK=MCLK/16, enable interrupt
-		75Mhz/16/(12+1) = 390625 Hz
+		75MHz/16/(12+1) = 390625 Hz
 	*/
 	rIICCON=(1<<7)|(0<<6)|(1<<5)|(0xC);
 	IICCON = rIICCON;
diff --git a/cpu/s3c44b0/interrupts.c b/cpu/s3c44b0/interrupts.c
index ed7964844..eb23e6ab1 100644
--- a/cpu/s3c44b0/interrupts.c
+++ b/cpu/s3c44b0/interrupts.c
@@ -80,7 +80,7 @@ void udelay (unsigned long usec)
 	ulong tmo;
 
 	tmo = usec / 1000;
-	tmo *= CFG_HZ;
+	tmo *= CONFIG_SYS_HZ;
 	tmo /= 8;
 
 	tmo += get_timer (0);
@@ -120,10 +120,10 @@ void udelay_masked (unsigned long usec)
 
 	if (usec >= 1000) {
 		tmo = usec / 1000;
-		tmo *= CFG_HZ;
+		tmo *= CONFIG_SYS_HZ;
 		tmo /= 8;
 	} else {
-		tmo = usec * CFG_HZ;
+		tmo = usec * CONFIG_SYS_HZ;
 		tmo /= (1000*8);
 	}
 
diff --git a/cpu/s3c44b0/start.S b/cpu/s3c44b0/start.S
index 1d88c1c03..f5a3d3ac3 100644
--- a/cpu/s3c44b0/start.S
+++ b/cpu/s3c44b0/start.S
@@ -157,8 +157,8 @@ vector_copy_loop:
 	/* Set up the stack						    */
 stack_setup:
 	ldr	r0, _TEXT_BASE		/* upper 128 KiB: relocated uboot   */
-	sub	r0, r0, #CFG_MALLOC_LEN	/* malloc area                      */
-	sub	r0, r0, #CFG_GBL_DATA_SIZE /* bdinfo                        */
+	sub	r0, r0, #CONFIG_SYS_MALLOC_LEN	/* malloc area                      */
+	sub	r0, r0, #CONFIG_SYS_GBL_DATA_SIZE /* bdinfo                        */
 #ifdef CONFIG_USE_IRQ
 	sub	r0, r0, #(CONFIG_STACKSIZE_IRQ+CONFIG_STACKSIZE_FIQ)
 #endif
diff --git a/cpu/sa1100/config.mk b/cpu/sa1100/config.mk
index 5be7dfb2f..9ef4a19d3 100644
--- a/cpu/sa1100/config.mk
+++ b/cpu/sa1100/config.mk
@@ -32,4 +32,5 @@ PLATFORM_CPPFLAGS += -march=armv4 -mtune=strongarm1100
 #
 # ========================================================================
 PLATFORM_CPPFLAGS +=$(call cc-option,-mapcs-32,-mabi=apcs-gnu)
+PLATFORM_CPPFLAGS +=$(call cc-option,-mno-thumb-interwork,)
 PLATFORM_RELFLAGS +=$(call cc-option,-mshort-load-bytes,$(call cc-option,-malignment-traps,))
diff --git a/cpu/sa1100/cpu.c b/cpu/sa1100/cpu.c
index f1bd64409..bb4e5a1de 100644
--- a/cpu/sa1100/cpu.c
+++ b/cpu/sa1100/cpu.c
@@ -43,7 +43,7 @@ int cpu_init (void)
 	 * setup up stacks if necessary
 	 */
 #ifdef CONFIG_USE_IRQ
-	IRQ_STACK_START = _armboot_start - CFG_MALLOC_LEN - CFG_GBL_DATA_SIZE - 4;
+	IRQ_STACK_START = _armboot_start - CONFIG_SYS_MALLOC_LEN - CONFIG_SYS_GBL_DATA_SIZE - 4;
 	FIQ_STACK_START = IRQ_STACK_START - CONFIG_STACKSIZE_IRQ;
 #endif
 	return 0;
diff --git a/cpu/sa1100/interrupts.c b/cpu/sa1100/interrupts.c
index 53f27456a..2eff04570 100644
--- a/cpu/sa1100/interrupts.c
+++ b/cpu/sa1100/interrupts.c
@@ -74,10 +74,10 @@ void udelay_masked (unsigned long usec)
 
 	if (usec >= 1000) {
 		tmo = usec / 1000;
-		tmo *= CFG_HZ;
+		tmo *= CONFIG_SYS_HZ;
 		tmo /= 1000;
 	} else {
-		tmo = usec * CFG_HZ;
+		tmo = usec * CONFIG_SYS_HZ;
 		tmo /= (1000*1000);
 	}
 
@@ -106,6 +106,6 @@ ulong get_tbclk (void)
 {
 	ulong tbclk;
 
-	tbclk = CFG_HZ;
+	tbclk = CONFIG_SYS_HZ;
 	return tbclk;
 }
diff --git a/cpu/sa1100/start.S b/cpu/sa1100/start.S
index 910650d15..278c5008f 100644
--- a/cpu/sa1100/start.S
+++ b/cpu/sa1100/start.S
@@ -147,8 +147,8 @@ copy_loop:
 	/* Set up the stack						    */
 stack_setup:
 	ldr	r0, _TEXT_BASE		/* upper 128 KiB: relocated uboot   */
-	sub	r0, r0, #CFG_MALLOC_LEN	/* malloc area                      */
-	sub	r0, r0, #CFG_GBL_DATA_SIZE /* bdinfo                        */
+	sub	r0, r0, #CONFIG_SYS_MALLOC_LEN	/* malloc area                      */
+	sub	r0, r0, #CONFIG_SYS_GBL_DATA_SIZE /* bdinfo                        */
 #ifdef CONFIG_USE_IRQ
 	sub	r0, r0, #(CONFIG_STACKSIZE_IRQ+CONFIG_STACKSIZE_FIQ)
 #endif
@@ -196,7 +196,7 @@ RST_BASE:		.word   0x90030000
 PWR_BASE:		.word   0x90020000
 #define PSPR    0x08
 #define PPCR    0x14
-cpuspeed:		.word   CFG_CPUSPEED
+cpuspeed:		.word   CONFIG_SYS_CPUSPEED
 
 
 cpu_init_crit:
@@ -288,8 +288,8 @@ cpu_init_crit:
 	add     r8, sp, #S_PC
 
 	ldr	r2, _armboot_start
-	sub	r2, r2, #(CONFIG_STACKSIZE+CFG_MALLOC_LEN)
-	sub	r2, r2, #(CFG_GBL_DATA_SIZE+8)  @ set base 2 words into abort stack
+	sub	r2, r2, #(CONFIG_STACKSIZE+CONFIG_SYS_MALLOC_LEN)
+	sub	r2, r2, #(CONFIG_SYS_GBL_DATA_SIZE+8)  @ set base 2 words into abort stack
 	ldmia	r2, {r2 - r4}                   @ get pc, cpsr, old_r0
 	add	r0, sp, #S_FRAME_SIZE		@ restore sp_SVC
 
@@ -321,8 +321,8 @@ cpu_init_crit:
 
 	.macro get_bad_stack
 	ldr	r13, _armboot_start		@ setup our mode stack
-	sub	r13, r13, #(CONFIG_STACKSIZE+CFG_MALLOC_LEN)
-	sub	r13, r13, #(CFG_GBL_DATA_SIZE+8) @ reserved a couple spots in abort stack
+	sub	r13, r13, #(CONFIG_STACKSIZE+CONFIG_SYS_MALLOC_LEN)
+	sub	r13, r13, #(CONFIG_SYS_GBL_DATA_SIZE+8) @ reserved a couple spots in abort stack
 
 	str	lr, [r13]			@ save caller lr / spsr
 	mrs	lr, spsr
diff --git a/cpu/sh2/Makefile b/cpu/sh2/Makefile
index 50f67208b..e33ba0f2a 100644
--- a/cpu/sh2/Makefile
+++ b/cpu/sh2/Makefile
@@ -29,7 +29,7 @@ include $(TOPDIR)/config.mk
 LIB	= $(obj)lib$(CPU).a
 
 START	= start.o
-OBJS	= cpu.o interrupts.o watchdog.o time.o # cache.o
+OBJS	= cpu.o interrupts.o watchdog.o
 
 all:	.depend $(START) $(LIB)
 
diff --git a/cpu/sh2/start.S b/cpu/sh2/start.S
index c4fa688bd..0ab867d54 100644
--- a/cpu/sh2/start.S
+++ b/cpu/sh2/start.S
@@ -73,6 +73,6 @@ loop:
 ._reloc_dst_end:	.long	reloc_dst_end
 ._bss_start:		.long	bss_start
 ._bss_end:		.long	bss_end
-._gd_init:		.long	(_start - CFG_GBL_DATA_SIZE)
-._stack_init:	.long	(_start - CFG_GBL_DATA_SIZE - CFG_MALLOC_LEN - 16)
+._gd_init:		.long	(_start - CONFIG_SYS_GBL_DATA_SIZE)
+._stack_init:	.long	(_start - CONFIG_SYS_GBL_DATA_SIZE - CONFIG_SYS_MALLOC_LEN - 16)
 ._sh_generic_init:	.long	sh_generic_init
diff --git a/cpu/sh3/Makefile b/cpu/sh3/Makefile
index 587413d2e..35e8f51ab 100644
--- a/cpu/sh3/Makefile
+++ b/cpu/sh3/Makefile
@@ -32,7 +32,7 @@ include $(TOPDIR)/config.mk
 LIB	= $(obj)lib$(CPU).a
 
 SOBJS	= start.o
-COBJS	= cpu.o interrupts.o watchdog.o time.o cache.o
+COBJS	= cpu.o interrupts.o watchdog.o cache.o
 
 SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
 OBJS	:= $(addprefix $(obj),$(COBJS))
diff --git a/cpu/sh3/start.S b/cpu/sh3/start.S
index ee0bcdf7b..c0f83261d 100644
--- a/cpu/sh3/start.S
+++ b/cpu/sh3/start.S
@@ -72,6 +72,6 @@ loop:
 ._reloc_dst_end:	.long	reloc_dst_end
 ._bss_start:		.long	bss_start
 ._bss_end:		.long	bss_end
-._gd_init:		.long	(_start - CFG_GBL_DATA_SIZE)
-._stack_init:	.long	(_start - CFG_GBL_DATA_SIZE - CFG_MALLOC_LEN - 16)
+._gd_init:		.long	(_start - CONFIG_SYS_GBL_DATA_SIZE)
+._stack_init:	.long	(_start - CONFIG_SYS_GBL_DATA_SIZE - CONFIG_SYS_MALLOC_LEN - 16)
 ._sh_generic_init:	.long	sh_generic_init
diff --git a/cpu/sh3/time.c b/cpu/sh3/time.c
deleted file mode 100644
index 0c273dde3..000000000
--- a/cpu/sh3/time.c
+++ /dev/null
@@ -1,103 +0,0 @@
-/*
- * (C) Copyright 2007
- * Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
- *
- * (C) Copyright 2007
- * Nobobuhiro Iwamatsu <iwamatsu@nigauri.org>
- *
- * (C) Copyright 2003
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/processor.h>
-#include <asm/io.h>
-
-#define TMU_MAX_COUNTER (~0UL)
-
-static void tmu_timer_start(unsigned int timer)
-{
-	if (timer > 2)
-		return;
-
-	outb(inb(TSTR) | (1 << timer), TSTR);
-}
-
-static void tmu_timer_stop(unsigned int timer)
-{
-	u8 val = inb(TSTR);
-
-	if (timer > 2)
-		return;
-	outb(val & ~(1 << timer), TSTR);
-}
-
-int timer_init(void)
-{
-	/* Divide clock by 4 */
-	outw(0, TCR0);
-
-	tmu_timer_stop(0);
-	tmu_timer_start(0);
-	return 0;
-}
-
-/*
-   In theory we should return a true 64bit value (ie something that doesn't
-   overflow). However, we don't. Therefore if TMU runs at fastest rate of
-   6.75 MHz this value will wrap after u-boot has been running for approx
-   10 minutes.
-*/
-unsigned long long get_ticks(void)
-{
-	return (0 - inl(TCNT0));
-}
-
-unsigned long get_timer(unsigned long base)
-{
-	return ((0 - inl(TCNT0)) - base);
-}
-
-void set_timer(unsigned long t)
-{
-	outl(0 - t, TCNT0);
-}
-
-void reset_timer(void)
-{
-	tmu_timer_stop(0);
-	set_timer(0);
-	tmu_timer_start(0);
-}
-
-void udelay(unsigned long usec)
-{
-	unsigned int start = get_timer(0);
-	unsigned int end = start + (usec * ((CFG_HZ + 500000) / 1000000));
-
-	while (get_timer(0) < end)
-		continue;
-}
-
-unsigned long get_tbclk(void)
-{
-	return CFG_HZ;
-}
diff --git a/cpu/sh4/Makefile b/cpu/sh4/Makefile
index d3c5eef6b..3c96a4931 100644
--- a/cpu/sh4/Makefile
+++ b/cpu/sh4/Makefile
@@ -29,7 +29,7 @@ include $(TOPDIR)/config.mk
 LIB	= $(obj)lib$(CPU).a
 
 SOBJS	= start.o
-COBJS	= cpu.o interrupts.o watchdog.o time.o cache.o
+COBJS	= cpu.o interrupts.o watchdog.o cache.o
 
 SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
 OBJS	:= $(addprefix $(obj),$(COBJS))
diff --git a/cpu/sh4/start.S b/cpu/sh4/start.S
index a68ebb8c9..711ae668d 100644
--- a/cpu/sh4/start.S
+++ b/cpu/sh4/start.S
@@ -69,6 +69,6 @@ loop:
 ._reloc_dst_end:	.long	reloc_dst_end
 ._bss_start:		.long	bss_start
 ._bss_end:		.long	bss_end
-._gd_init:		.long	(_start - CFG_GBL_DATA_SIZE)
-._stack_init:		.long	(_start - CFG_GBL_DATA_SIZE - CFG_MALLOC_LEN - 16)
+._gd_init:		.long	(_start - CONFIG_SYS_GBL_DATA_SIZE)
+._stack_init:		.long	(_start - CONFIG_SYS_GBL_DATA_SIZE - CONFIG_SYS_MALLOC_LEN - 16)
 ._sh_generic_init:	.long	sh_generic_init
diff --git a/cpu/sh4/time.c b/cpu/sh4/time.c
deleted file mode 100644
index 5f8a3a080..000000000
--- a/cpu/sh4/time.c
+++ /dev/null
@@ -1,98 +0,0 @@
-/*
- * (C) Copyright 2007
- * Nobobuhiro Iwamatsu <iwamatsu@nigauri.org>
- *
- * (C) Copyright 2003
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/processor.h>
-
-#define TMU_MAX_COUNTER (~0UL)
-
-static void tmu_timer_start (unsigned int timer)
-{
-	if (timer > 2)
-		return;
-
-	*((volatile unsigned char *) TSTR) |= (1 << timer);
-}
-
-static void tmu_timer_stop (unsigned int timer)
-{
-	u8 val = *((volatile u8 *)TSTR);
-	if (timer > 2)
-		return;
-	*((volatile unsigned char *)TSTR) = val &~(1 << timer);
-}
-
-int timer_init (void)
-{
-	/* Divide clock by 4 */
-	*(volatile u16 *)TCR0 = 0;
-
-	tmu_timer_stop(0);
-	tmu_timer_start(0);
-	return 0;
-}
-
-/*
-   In theory we should return a true 64bit value (ie something that doesn't
-   overflow). However, we don't. Therefore if TMU runs at fastest rate of
-   6.75 MHz this value will wrap after u-boot has been running for approx
-   10 minutes.
-*/
-unsigned long long get_ticks (void)
-{
-	return (0 - *((volatile u32 *) TCNT0));
-}
-
-unsigned long get_timer (unsigned long base)
-{
-	return ((0 - *((volatile u32 *) TCNT0)) - base);
-}
-
-void set_timer (unsigned long t)
-{
-	*((volatile unsigned int *) TCNT0) = (0 - t);
-}
-
-void reset_timer (void)
-{
-	tmu_timer_stop(0);
-	set_timer (0);
-	tmu_timer_start(0);
-}
-
-void udelay (unsigned long usec)
-{
-	unsigned int start = get_timer (0);
-	unsigned int end = start + (usec * ((CFG_HZ + 500000) / 1000000));
-
-	while (get_timer (0) < end)
-		continue;
-}
-
-unsigned long get_tbclk (void)
-{
-	return CFG_HZ;
-}
diff --git a/cpu/sh4/watchdog.c b/cpu/sh4/watchdog.c
index 346e21714..f6924290f 100644
--- a/cpu/sh4/watchdog.c
+++ b/cpu/sh4/watchdog.c
@@ -17,34 +17,55 @@
 
 #include <common.h>
 #include <asm/processor.h>
+#include <asm/io.h>
 
 #define WDT_BASE	WTCNT
 
-static unsigned char cnt_read (void){
-	return *((volatile unsigned char *)(WDT_BASE + 0x00));
+#define WDT_WD		(1 << 6)
+#define WDT_RST_P	(0)
+#define WDT_RST_M	(1 << 5)
+#define WDT_ENABLE	(1 << 7)
+
+#if defined(CONFIG_WATCHDOG)
+static unsigned char csr_read(void)
+{
+	return inb(WDT_BASE + 0x04);
 }
 
-static unsigned char csr_read (void){
-	return *((volatile unsigned char *)(WDT_BASE + 0x04));
+static void cnt_write(unsigned char value)
+{
+	outl((unsigned short)value | 0x5A00, WDT_BASE + 0x00);
 }
 
-static void cnt_write (unsigned char value){
-	while (csr_read() & (1 << 5)) {
-		/* delay */
-	}
-	*((volatile unsigned short *)(WDT_BASE + 0x00))
-		= ((unsigned short) value) | 0x5A00;
+static void csr_write(unsigned char value)
+{
+	outl((unsigned short)value | 0xA500, WDT_BASE + 0x04);
 }
 
-static void csr_write (unsigned char value){
-	*((volatile unsigned short *)(WDT_BASE + 0x04))
-		= ((unsigned short) value) | 0xA500;
+void watchdog_reset(void)
+{
+	outl(0x55000000, WDT_BASE + 0x08);
 }
 
+int watchdog_init(void)
+{
+	/* Set overflow time*/
+	cnt_write(0);
+	/* Power on reset */
+	csr_write(WDT_WD|WDT_RST_P|WDT_ENABLE);
+
+	return 0;
+}
 
-int watchdog_init (void){ return 0; }
+int watchdog_disable(void)
+{
+	csr_write(csr_read() & ~WDT_ENABLE);
+	return 0;
+}
+#endif
 
-void reset_cpu (unsigned long ignored)
+void reset_cpu(unsigned long ignored)
 {
-	while(1);
+	while (1)
+		;
 }
diff --git a/disk/Makefile b/disk/Makefile
index f19d18d89..c4791451c 100644
--- a/disk/Makefile
+++ b/disk/Makefile
@@ -32,6 +32,7 @@ COBJS-y += part_mac.o
 COBJS-y += part_dos.o
 COBJS-y += part_iso.o
 COBJS-y += part_amiga.o
+COBJS-y += part_efi.o
 
 COBJS	:= $(COBJS-y)
 SRCS	:= $(COBJS:.o=.c)
diff --git a/disk/part.c b/disk/part.c
index 5c4bf6b61..e353cee99 100644
--- a/disk/part.c
+++ b/disk/part.c
@@ -117,6 +117,7 @@ void dev_print (block_dev_desc_t *dev_desc)
 			dev_desc->product,
 			dev_desc->revision);
 		break;
+	case IF_TYPE_ATAPI:
 	case IF_TYPE_IDE:
 	case IF_TYPE_SATA:
 		printf ("Model: %s Firm: %s Ser#: %s\n",
@@ -124,9 +125,22 @@ void dev_print (block_dev_desc_t *dev_desc)
 			dev_desc->revision,
 			dev_desc->product);
 		break;
+	case IF_TYPE_SD:
+	case IF_TYPE_MMC:
+	case IF_TYPE_USB:
+		printf ("Vendor: %s Rev: %s Prod: %s\n",
+			dev_desc->vendor,
+			dev_desc->revision,
+			dev_desc->product);
+		break;
+	case IF_TYPE_DOC:
+		puts("device type DOC\n");
+		return;
 	case IF_TYPE_UNKNOWN:
+		puts("device type unknown\n");
+		return;
 	default:
-		puts ("not available\n");
+		printf("Unhandled device type: %i\n", dev_desc->if_type);
 		return;
 	}
 	puts ("            Type: ");
@@ -169,7 +183,7 @@ void dev_print (block_dev_desc_t *dev_desc)
 		if (dev_desc->lba48)
 			printf ("            Supports 48-bit addressing\n");
 #endif
-#if defined(CFG_64BIT_LBA) && defined(CFG_64BIT_VSPRINTF)
+#if defined(CONFIG_SYS_64BIT_LBA) && defined(CONFIG_SYS_64BIT_VSPRINTF)
 		printf ("            Capacity: %ld.%ld MB = %ld.%ld GB (%qd x %ld)\n",
 			mb_quot, mb_rem,
 			gb_quot, gb_rem,
@@ -198,7 +212,8 @@ void dev_print (block_dev_desc_t *dev_desc)
 #if defined(CONFIG_MAC_PARTITION) || \
     defined(CONFIG_DOS_PARTITION) || \
     defined(CONFIG_ISO_PARTITION) || \
-    defined(CONFIG_AMIGA_PARTITION)
+    defined(CONFIG_AMIGA_PARTITION) || \
+    defined(CONFIG_EFI_PARTITION)
 
 void init_part (block_dev_desc_t * dev_desc)
 {
@@ -216,6 +231,14 @@ void init_part (block_dev_desc_t * dev_desc)
 	}
 #endif
 
+/* must be placed before DOS partition detection */
+#ifdef CONFIG_EFI_PARTITION
+	if (test_part_efi(dev_desc) == 0) {
+		dev_desc->part_type = PART_TYPE_EFI;
+		return;
+	}
+#endif
+
 #ifdef CONFIG_DOS_PARTITION
 	if (test_part_dos(dev_desc) == 0) {
 		dev_desc->part_type = PART_TYPE_DOS;
@@ -272,6 +295,15 @@ int get_partition_info (block_dev_desc_t *dev_desc, int part
 	    }
 	    break;
 #endif
+
+#ifdef CONFIG_EFI_PARTITION
+	case PART_TYPE_EFI:
+		if (get_partition_info_efi(dev_desc,part,info) == 0) {
+			PRINTF ("## Valid EFI partition found ##\n");
+			return (0);
+		}
+		break;
+#endif
 	default:
 		break;
 	}
@@ -342,14 +374,23 @@ void print_part (block_dev_desc_t * dev_desc)
 	    print_part_amiga (dev_desc);
 	    return;
 #endif
+
+#ifdef CONFIG_EFI_PARTITION
+	case PART_TYPE_EFI:
+		PRINTF ("## Testing for valid EFI partition ##\n");
+		print_part_header ("EFI", dev_desc);
+		print_part_efi (dev_desc);
+		return;
+#endif
 	}
 	puts ("## Unknown partition table\n");
 }
 
 
-#else	/* neither MAC nor DOS nor ISO partition configured */
+#else	/* neither MAC nor DOS nor ISO nor AMIGA nor EFI partition configured */
 # error neither CONFIG_MAC_PARTITION nor CONFIG_DOS_PARTITION
-# error nor CONFIG_ISO_PARTITION configured!
+# error nor CONFIG_ISO_PARTITION nor CONFIG_AMIGA_PARTITION
+# error nor CONFIG_EFI_PARTITION configured!
 #endif
 
 #endif
diff --git a/disk/part_efi.c b/disk/part_efi.c
new file mode 100644
index 000000000..cc188ee89
--- /dev/null
+++ b/disk/part_efi.c
@@ -0,0 +1,425 @@
+/*
+ * Copyright (C) 2008 RuggedCom, Inc.
+ * Richard Retanubun <RichardRetanubun@RuggedCom.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * Problems with CONFIG_SYS_64BIT_LBA:
+ *
+ * struct disk_partition.start in include/part.h is sized as ulong.
+ * When CONFIG_SYS_64BIT_LBA is activated, lbaint_t changes from ulong to uint64_t.
+ * For now, it is cast back to ulong at assignment.
+ *
+ * This limits the maximum size of addressable storage to < 2 Terra Bytes
+ */
+#include <common.h>
+#include <command.h>
+#include <ide.h>
+#include <malloc.h>
+#include "part_efi.h"
+
+#if (defined(CONFIG_CMD_IDE) || \
+     defined(CONFIG_CMD_SATA) || \
+     defined(CONFIG_CMD_SCSI) || \
+     defined(CONFIG_CMD_USB) || \
+     defined(CONFIG_MMC) || \
+     defined(CONFIG_SYSTEMACE) ) && defined(CONFIG_EFI_PARTITION)
+
+/* Convert char[2] in little endian format to the host format integer
+ */
+static inline unsigned short le16_to_int(unsigned char *le16)
+{
+	return ((le16[1] << 8) + le16[0]);
+}
+
+/* Convert char[4] in little endian format to the host format integer
+ */
+static inline unsigned long le32_to_int(unsigned char *le32)
+{
+	return ((le32[3] << 24) + (le32[2] << 16) + (le32[1] << 8) + le32[0]);
+}
+
+/* Convert char[8] in little endian format to the host format integer
+ */
+static inline unsigned long long le64_to_int(unsigned char *le64)
+{
+	return (((unsigned long long)le64[7] << 56) +
+		((unsigned long long)le64[6] << 48) +
+		((unsigned long long)le64[5] << 40) +
+		((unsigned long long)le64[4] << 32) +
+		((unsigned long long)le64[3] << 24) +
+		((unsigned long long)le64[2] << 16) +
+		((unsigned long long)le64[1] << 8) +
+		(unsigned long long)le64[0]);
+}
+
+/**
+ * efi_crc32() - EFI version of crc32 function
+ * @buf: buffer to calculate crc32 of
+ * @len - length of buf
+ *
+ * Description: Returns EFI-style CRC32 value for @buf
+ */
+static inline unsigned long efi_crc32(const void *buf, unsigned long len)
+{
+	return crc32(0, buf, len);
+}
+
+/*
+ * Private function prototypes
+ */
+
+static int pmbr_part_valid(struct partition *part);
+static int is_pmbr_valid(legacy_mbr * mbr);
+
+static int is_gpt_valid(block_dev_desc_t * dev_desc, unsigned long long lba,
+				gpt_header * pgpt_head, gpt_entry ** pgpt_pte);
+
+static gpt_entry *alloc_read_gpt_entries(block_dev_desc_t * dev_desc,
+				gpt_header * pgpt_head);
+
+static int is_pte_valid(gpt_entry * pte);
+
+/*
+ * Public Functions (include/part.h)
+ */
+
+void print_part_efi(block_dev_desc_t * dev_desc)
+{
+	gpt_header gpt_head;
+	gpt_entry **pgpt_pte = NULL;
+	int i = 0;
+
+	if (!dev_desc) {
+		printf("%s: Invalid Argument(s)\n", __FUNCTION__);
+		return;
+	}
+	/* This function validates AND fills in the GPT header and PTE */
+	if (is_gpt_valid(dev_desc, GPT_PRIMARY_PARTITION_TABLE_LBA,
+			 &(gpt_head), pgpt_pte) != 1) {
+		printf("%s: *** ERROR: Invalid GPT ***\n", __FUNCTION__);
+		return;
+	}
+
+	debug("%s: gpt-entry at 0x%08X\n", __FUNCTION__, (unsigned int)*pgpt_pte);
+
+	printf("Part  Start LBA  End LBA\n");
+	for (i = 0; i < le32_to_int(gpt_head.num_partition_entries); i++) {
+
+		if (is_pte_valid(&(*pgpt_pte)[i])) {
+			printf("%s%d  0x%llX    0x%llX\n", GPT_ENTRY_NAME,
+				(i + 1),
+				le64_to_int((*pgpt_pte)[i].starting_lba),
+				le64_to_int((*pgpt_pte)[i].ending_lba));
+		} else {
+			break;	/* Stop at the first non valid PTE */
+		}
+	}
+
+	/* Remember to free pte */
+	if (*pgpt_pte != NULL) {
+		debug("%s: Freeing pgpt_pte\n", __FUNCTION__);
+		free(*pgpt_pte);
+	}
+	return;
+}
+
+int get_partition_info_efi(block_dev_desc_t * dev_desc, int part,
+				disk_partition_t * info)
+{
+	gpt_header gpt_head;
+	gpt_entry **pgpt_pte = NULL;
+
+	/* "part" argument must be at least 1 */
+	if (!dev_desc || !info || part < 1) {
+		printf("%s: Invalid Argument(s)\n", __FUNCTION__);
+		return -1;
+	}
+
+	/* This function validates AND fills in the GPT header and PTE */
+	if (is_gpt_valid(dev_desc, GPT_PRIMARY_PARTITION_TABLE_LBA,
+			&(gpt_head), pgpt_pte) != 1) {
+		printf("%s: *** ERROR: Invalid GPT ***\n", __FUNCTION__);
+		return -1;
+	}
+
+	/* The ulong casting limits the maximum disk size to 2 TB */
+	info->start = (ulong) le64_to_int((*pgpt_pte)[part - 1].starting_lba);
+	info->size = (ulong) le64_to_int((*pgpt_pte)[part - 1].ending_lba) - info->start;
+	info->blksz = GPT_BLOCK_SIZE;
+
+	sprintf((char *)info->name, "%s%d\n", GPT_ENTRY_NAME, part);
+	sprintf((char *)info->type, "U-Boot");
+
+	debug("%s: start 0x%lX, size 0x%lX, name %s", __FUNCTION__,
+		info->start, info->size, info->name);
+
+	/* Remember to free pte */
+	if (*pgpt_pte != NULL) {
+		debug("%s: Freeing pgpt_pte\n", __FUNCTION__);
+		free(*pgpt_pte);
+	}
+	return 0;
+}
+
+int test_part_efi(block_dev_desc_t * dev_desc)
+{
+	legacy_mbr legacymbr;
+
+	/* Read legacy MBR from block 0 and validate it */
+	if ((dev_desc->block_read(dev_desc->dev, 0, 1, (ulong *) & legacymbr) != 1)
+		|| (is_pmbr_valid(&legacymbr) != 1)) {
+		return -1;
+	}
+	return 0;
+}
+
+/*
+ * Private functions
+ */
+/*
+ * pmbr_part_valid(): Check for EFI partition signature
+ *
+ * Returns: 1 if EFI GPT partition type is found.
+ */
+static int pmbr_part_valid(struct partition *part)
+{
+	if (part->sys_ind == EFI_PMBR_OSTYPE_EFI_GPT &&
+		le32_to_int(part->start_sect) == 1UL) {
+		return 1;
+	}
+
+	return 0;
+}
+
+/*
+ * is_pmbr_valid(): test Protective MBR for validity
+ *
+ * Returns: 1 if PMBR is valid, 0 otherwise.
+ * Validity depends on two things:
+ *  1) MSDOS signature is in the last two bytes of the MBR
+ *  2) One partition of type 0xEE is found, checked by pmbr_part_valid()
+ */
+static int is_pmbr_valid(legacy_mbr * mbr)
+{
+	int i = 0;
+
+	if (!mbr || le16_to_int(mbr->signature) != MSDOS_MBR_SIGNATURE) {
+		return 0;
+	}
+
+	for (i = 0; i < 4; i++) {
+		if (pmbr_part_valid(&mbr->partition_record[i])) {
+			return 1;
+		}
+	}
+	return 0;
+}
+
+/**
+ * is_gpt_valid() - tests one GPT header and PTEs for validity
+ *
+ * lba is the logical block address of the GPT header to test
+ * gpt is a GPT header ptr, filled on return.
+ * ptes is a PTEs ptr, filled on return.
+ *
+ * Description: returns 1 if valid,  0 on error.
+ * If valid, returns pointers to PTEs.
+ */
+static int is_gpt_valid(block_dev_desc_t * dev_desc, unsigned long long lba,
+			gpt_header * pgpt_head, gpt_entry ** pgpt_pte)
+{
+	unsigned char crc32_backup[4] = { 0 };
+	unsigned long calc_crc32;
+	unsigned long long lastlba;
+
+	if (!dev_desc || !pgpt_head) {
+		printf("%s: Invalid Argument(s)\n", __FUNCTION__);
+		return 0;
+	}
+
+	/* Read GPT Header from device */
+	if (dev_desc->block_read(dev_desc->dev, lba, 1, pgpt_head) != 1) {
+		printf("*** ERROR: Can't read GPT header ***\n");
+		return 0;
+	}
+
+	/* Check the GPT header signature */
+	if (le64_to_int(pgpt_head->signature) != GPT_HEADER_SIGNATURE) {
+		printf("GUID Partition Table Header signature is wrong:"
+			"0x%llX != 0x%llX\n",
+			(unsigned long long)le64_to_int(pgpt_head->signature),
+			(unsigned long long)GPT_HEADER_SIGNATURE);
+		return 0;
+	}
+
+	/* Check the GUID Partition Table CRC */
+	memcpy(crc32_backup, pgpt_head->header_crc32, sizeof(crc32_backup));
+	memset(pgpt_head->header_crc32, 0, sizeof(pgpt_head->header_crc32));
+
+	calc_crc32 = efi_crc32((const unsigned char *)pgpt_head,
+		le32_to_int(pgpt_head->header_size));
+
+	memcpy(pgpt_head->header_crc32, crc32_backup, sizeof(crc32_backup));
+
+	if (calc_crc32 != le32_to_int(crc32_backup)) {
+		printf("GUID Partition Table Header CRC is wrong:"
+			"0x%08lX != 0x%08lX\n",
+			le32_to_int(crc32_backup), calc_crc32);
+		return 0;
+	}
+
+	/* Check that the my_lba entry points to the LBA that contains the GPT */
+	if (le64_to_int(pgpt_head->my_lba) != lba) {
+		printf("GPT: my_lba incorrect: %llX != %llX\n",
+			(unsigned long long)le64_to_int(pgpt_head->my_lba),
+			(unsigned long long)lba);
+		return 0;
+	}
+
+	/* Check the first_usable_lba and last_usable_lba are within the disk. */
+	lastlba = (unsigned long long)dev_desc->lba;
+	if (le64_to_int(pgpt_head->first_usable_lba) > lastlba) {
+		printf("GPT: first_usable_lba incorrect: %llX > %llX\n",
+			le64_to_int(pgpt_head->first_usable_lba), lastlba);
+		return 0;
+	}
+	if (le64_to_int(pgpt_head->last_usable_lba) > lastlba) {
+		printf("GPT: last_usable_lba incorrect: %llX > %llX\n",
+			le64_to_int(pgpt_head->last_usable_lba), lastlba);
+		return 0;
+	}
+
+	debug("GPT: first_usable_lba: %llX last_usable_lba %llX last lba %llX\n",
+		le64_to_int(pgpt_head->first_usable_lba),
+		le64_to_int(pgpt_head->last_usable_lba), lastlba);
+
+	/* Read and allocate Partition Table Entries */
+	*pgpt_pte = alloc_read_gpt_entries(dev_desc, pgpt_head);
+	if (*pgpt_pte == NULL) {
+		printf("GPT: Failed to allocate memory for PTE\n");
+		return 0;
+	}
+
+	/* Check the GUID Partition Table Entry Array CRC */
+	calc_crc32 = efi_crc32((const unsigned char *)*pgpt_pte,
+		le32_to_int(pgpt_head->num_partition_entries) *
+		le32_to_int(pgpt_head->sizeof_partition_entry));
+
+	if (calc_crc32 != le32_to_int(pgpt_head->partition_entry_array_crc32)) {
+		printf("GUID Partition Table Entry Array CRC is wrong:"
+			"0x%08lX != 0x%08lX\n",
+			le32_to_int(pgpt_head->partition_entry_array_crc32),
+			calc_crc32);
+
+		if (*pgpt_pte != NULL) {
+			free(*pgpt_pte);
+		}
+		return 0;
+	}
+
+	/* We're done, all's well */
+	return 1;
+}
+
+/**
+ * alloc_read_gpt_entries(): reads partition entries from disk
+ * @dev_desc
+ * @gpt - GPT header
+ *
+ * Description: Returns ptes on success,  NULL on error.
+ * Allocates space for PTEs based on information found in @gpt.
+ * Notes: remember to free pte when you're done!
+ */
+static gpt_entry *alloc_read_gpt_entries(block_dev_desc_t * dev_desc,
+					 gpt_header * pgpt_head)
+{
+	size_t count = 0;
+	gpt_entry *pte = NULL;
+
+	if (!dev_desc || !pgpt_head) {
+		printf("%s: Invalid Argument(s)\n", __FUNCTION__);
+		return NULL;
+	}
+
+	count = le32_to_int(pgpt_head->num_partition_entries) *
+		le32_to_int(pgpt_head->sizeof_partition_entry);
+
+	debug("%s: count = %lu * %lu = %u\n", __FUNCTION__,
+		le32_to_int(pgpt_head->num_partition_entries),
+		le32_to_int(pgpt_head->sizeof_partition_entry), count);
+
+	/* Allocate memory for PTE, remember to FREE */
+	if (count != 0) {
+		pte = malloc(count);
+	}
+
+	if (count == 0 || pte == NULL) {
+		printf("%s: ERROR: Can't allocate 0x%X bytes for GPT Entries\n",
+			__FUNCTION__, count);
+		return NULL;
+	}
+
+	/* Read GPT Entries from device */
+	if (dev_desc->block_read (dev_desc->dev,
+		(unsigned long)le64_to_int(pgpt_head->partition_entry_lba),
+		(lbaint_t) (count / GPT_BLOCK_SIZE), pte)
+		!= (count / GPT_BLOCK_SIZE)) {
+
+		printf("*** ERROR: Can't read GPT Entries ***\n");
+		free(pte);
+		return NULL;
+	}
+	return pte;
+}
+
+/**
+ * is_pte_valid(): validates a single Partition Table Entry
+ * @gpt_entry - Pointer to a single Partition Table Entry
+ *
+ * Description: returns 1 if valid,  0 on error.
+ */
+static int is_pte_valid(gpt_entry * pte)
+{
+	efi_guid_t unused_guid;
+
+	if (!pte) {
+		printf("%s: Invalid Argument(s)\n", __FUNCTION__);
+		return 0;
+	}
+
+	/* Only one validation for now:
+	 * The GUID Partition Type != Unused Entry (ALL-ZERO)
+	 */
+	memset(unused_guid.b, 0, sizeof(unused_guid.b));
+
+	if (memcmp(pte->partition_type_guid.b, unused_guid.b,
+		sizeof(unused_guid.b)) == 0) {
+
+		debug("%s: Found an unused PTE GUID at 0x%08X\n", __FUNCTION__,
+		(unsigned int)pte);
+
+		return 0;
+	} else {
+		return 1;
+	}
+}
+#endif
diff --git a/disk/part_efi.h b/disk/part_efi.h
new file mode 100644
index 000000000..6bbb06bde
--- /dev/null
+++ b/disk/part_efi.h
@@ -0,0 +1,138 @@
+/*
+ * Copyright (C) 2008 RuggedCom, Inc.
+ * Richard Retanubun <RichardRetanubun@RuggedCom.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * See also linux/fs/partitions/efi.h
+ *
+ * EFI GUID Partition Table
+ * Per Intel EFI Specification v1.02
+ * http://developer.intel.com/technology/efi/efi.htm
+*/
+
+#ifndef _DISK_PART_EFI_H
+#define _DISK_PART_EFI_H
+
+#define MSDOS_MBR_SIGNATURE 0xAA55
+#define EFI_PMBR_OSTYPE_EFI 0xEF
+#define EFI_PMBR_OSTYPE_EFI_GPT 0xEE
+
+#define GPT_BLOCK_SIZE 512
+#define GPT_HEADER_SIGNATURE 0x5452415020494645ULL
+#define GPT_HEADER_REVISION_V1 0x00010000
+#define GPT_PRIMARY_PARTITION_TABLE_LBA 1ULL
+#define GPT_ENTRY_NAME "gpt"
+
+#define EFI_GUID(a,b,c,d0,d1,d2,d3,d4,d5,d6,d7) \
+	((efi_guid_t) \
+	{{ (a) & 0xff, ((a) >> 8) & 0xff, ((a) >> 16) & 0xff, ((a) >> 24) & 0xff, \
+		(b) & 0xff, ((b) >> 8) & 0xff, \
+		(c) & 0xff, ((c) >> 8) & 0xff, \
+		(d0), (d1), (d2), (d3), (d4), (d5), (d6), (d7) }})
+
+#define PARTITION_SYSTEM_GUID \
+	EFI_GUID( 0xC12A7328, 0xF81F, 0x11d2, \
+		0xBA, 0x4B, 0x00, 0xA0, 0xC9, 0x3E, 0xC9, 0x3B)
+#define LEGACY_MBR_PARTITION_GUID \
+	EFI_GUID( 0x024DEE41, 0x33E7, 0x11d3, \
+		0x9D, 0x69, 0x00, 0x08, 0xC7, 0x81, 0xF3, 0x9F)
+#define PARTITION_MSFT_RESERVED_GUID \
+	EFI_GUID( 0xE3C9E316, 0x0B5C, 0x4DB8, \
+		0x81, 0x7D, 0xF9, 0x2D, 0xF0, 0x02, 0x15, 0xAE)
+#define PARTITION_BASIC_DATA_GUID \
+	EFI_GUID( 0xEBD0A0A2, 0xB9E5, 0x4433, \
+		0x87, 0xC0, 0x68, 0xB6, 0xB7, 0x26, 0x99, 0xC7)
+#define PARTITION_LINUX_RAID_GUID \
+	EFI_GUID( 0xa19d880f, 0x05fc, 0x4d3b, \
+		0xa0, 0x06, 0x74, 0x3f, 0x0f, 0x84, 0x91, 0x1e)
+#define PARTITION_LINUX_SWAP_GUID \
+	EFI_GUID( 0x0657fd6d, 0xa4ab, 0x43c4, \
+		0x84, 0xe5, 0x09, 0x33, 0xc8, 0x4b, 0x4f, 0x4f)
+#define PARTITION_LINUX_LVM_GUID \
+	EFI_GUID( 0xe6d6d379, 0xf507, 0x44c2, \
+		0xa2, 0x3c, 0x23, 0x8f, 0x2a, 0x3d, 0xf9, 0x28)
+
+/* linux/include/efi.h */
+typedef unsigned short efi_char16_t;
+
+typedef struct {
+	unsigned char b[16];
+} efi_guid_t;
+
+/* based on linux/include/genhd.h */
+struct partition {
+	unsigned char boot_ind;		/* 0x80 - active */
+	unsigned char head;		/* starting head */
+	unsigned char sector;		/* starting sector */
+	unsigned char cyl;		/* starting cylinder */
+	unsigned char sys_ind;		/* What partition type */
+	unsigned char end_head;		/* end head */
+	unsigned char end_sector;	/* end sector */
+	unsigned char end_cyl;		/* end cylinder */
+	unsigned char start_sect[4];	/* starting sector counting from 0 */
+	unsigned char nr_sects[4];	/* nr of sectors in partition */
+} __attribute__ ((packed));
+
+/* based on linux/fs/partitions/efi.h */
+typedef struct _gpt_header {
+	unsigned char signature[8];
+	unsigned char revision[4];
+	unsigned char header_size[4];
+	unsigned char header_crc32[4];
+	unsigned char reserved1[4];
+	unsigned char my_lba[8];
+	unsigned char alternate_lba[8];
+	unsigned char first_usable_lba[8];
+	unsigned char last_usable_lba[8];
+	efi_guid_t disk_guid;
+	unsigned char partition_entry_lba[8];
+	unsigned char num_partition_entries[4];
+	unsigned char sizeof_partition_entry[4];
+	unsigned char partition_entry_array_crc32[4];
+	unsigned char reserved2[GPT_BLOCK_SIZE - 92];
+} __attribute__ ((packed)) gpt_header;
+
+typedef struct _gpt_entry_attributes {
+	unsigned long long required_to_function:1;
+	unsigned long long reserved:47;
+	unsigned long long type_guid_specific:16;
+} __attribute__ ((packed)) gpt_entry_attributes;
+
+typedef struct _gpt_entry {
+	efi_guid_t partition_type_guid;
+	efi_guid_t unique_partition_guid;
+	unsigned char starting_lba[8];
+	unsigned char ending_lba[8];
+	gpt_entry_attributes attributes;
+	efi_char16_t partition_name[72 / sizeof(efi_char16_t)];
+}
+__attribute__ ((packed)) gpt_entry;
+
+typedef struct _legacy_mbr {
+	unsigned char boot_code[440];
+	unsigned char unique_mbr_signature[4];
+	unsigned char unknown[2];
+	struct partition partition_record[4];
+	unsigned char signature[2];
+} __attribute__ ((packed)) legacy_mbr;
+
+#endif	/* _DISK_PART_EFI_H */
diff --git a/doc/I2C_Edge_Conditions b/doc/I2C_Edge_Conditions
index 44d347854..f4a996870 100644
--- a/doc/I2C_Edge_Conditions
+++ b/doc/I2C_Edge_Conditions
@@ -33,7 +33,7 @@ Notes
 This reset edge condition could possibly be present in every I2C
 controller and device available. For boards where a I2C bus reset
 function can be implemented a i2c_init_board() function should be
-provided and enabled by #define'ing CFG_I2C_INIT_BOARD in your
+provided and enabled by #define'ing CONFIG_SYS_I2C_INIT_BOARD in your
 board's config file. Note that this is NOT necessary when using the
 bit-banging I2C driver (common/soft_i2c.c) as this already includes
 the I2C bus reset sequence.
diff --git a/doc/README.JFFS2 b/doc/README.JFFS2
index c5d67fd4e..f0e9bc1b3 100644
--- a/doc/README.JFFS2
+++ b/doc/README.JFFS2
@@ -12,7 +12,7 @@ chpart  - change active partition
 
 If you boot from a partition which is mounted writable, and you
 update your boot environment by replacing single files on that
-partition, you should also define CFG_JFFS2_SORT_FRAGMENTS. Scanning
+partition, you should also define CONFIG_SYS_JFFS2_SORT_FRAGMENTS. Scanning
 the JFFS2 filesystem takes *much* longer with this feature, though.
 Sorting is done while inserting into the fragment list, which is
 more or less a bubble sort. That algorithm is known to be O(n^2),
@@ -24,16 +24,16 @@ the flash_info structure to find the start of a JFFS2 disk (called
 partition in the code) and you can change where the partition is with
 two defines.
 
-CFG_JFFS2_FIRST_BANK
+CONFIG_SYS_JFFS2_FIRST_BANK
 	defined the first flash bank to use
 
-CFG_JFFS2_FIRST_SECTOR
+CONFIG_SYS_JFFS2_FIRST_SECTOR
 	defines the first sector to use
 
 
-The second way is to define CFG_JFFS_CUSTOM_PART and implement the
+The second way is to define CONFIG_SYS_JFFS_CUSTOM_PART and implement the
 jffs2_part_info(int part_num) function in your board specific files.
-In this mode CFG_JFFS2_FIRST_BANK and CFG_JFFS2_FIRST_SECTOR is not
+In this mode CONFIG_SYS_JFFS2_FIRST_BANK and CONFIG_SYS_JFFS2_FIRST_SECTOR is not
 used.
 
 The input is a partition number starting with 0.
@@ -41,7 +41,7 @@ Return a pointer to struct part_info or NULL for error;
 
 Ex jffs2_part_info() for one partition.
 ---
-#if defined CFG_JFFS_CUSTOM_PART
+#if defined CONFIG_SYS_JFFS_CUSTOM_PART
 #include <jffs2/jffs2.h>
 
 static struct part_info part;
diff --git a/doc/README.JFFS2_NAND b/doc/README.JFFS2_NAND
index a836d53be..2b3326bc1 100644
--- a/doc/README.JFFS2_NAND
+++ b/doc/README.JFFS2_NAND
@@ -13,7 +13,7 @@ configured using the following #defines in the configuration file:
 #define CONFIG_JFFS2_NAND_SIZE 2*1024*1024	/* size of jffs2 partition */
 
 If more than a single partition is desired, the user can define a
-CFG_JFFS_CUSTOM_PART macro and implement a
+CONFIG_SYS_JFFS_CUSTOM_PART macro and implement a
 
 	struct part_info* jffs2_part_info(int part_num)
 
diff --git a/doc/README.MBX b/doc/README.MBX
index 679228ec3..c889fe979 100644
--- a/doc/README.MBX
+++ b/doc/README.MBX
@@ -1,4 +1,4 @@
-IMPORTANT NOTE - read before defining CFG_USE_OSCCLK in your board
+IMPORTANT NOTE - read before defining CONFIG_SYS_USE_OSCCLK in your board
 		 config file!!!
 
 
@@ -62,7 +62,7 @@ firmware opts for the NASTY timing loops, but needs to configure the
 serial ports to do so.
 
 
-You may have a legitimate need to define CFG_USE_OSCCLK if your
+You may have a legitimate need to define CONFIG_SYS_USE_OSCCLK if your
 MBX8xx board is using the OSCM clocking mode.
 
 You better know what you are doing here.
diff --git a/doc/README.MPC866 b/doc/README.MPC866
index c8256a14c..4707cb7df 100644
--- a/doc/README.MPC866
+++ b/doc/README.MPC866
@@ -4,8 +4,8 @@ clock value, in MHz, via an environment variable "cpuclk".
 Four compile-time constants are used:
 
 	CONFIG_8xx_OSCLK          - input quartz clock
-	CFG_8xx_CPUCLK_MIN        - minimum allowed CPU clock
-	CFG_8xx_CPUCLK_MAX        - maximum allowed CPU clock
+	CONFIG_SYS_8xx_CPUCLK_MIN        - minimum allowed CPU clock
+	CONFIG_SYS_8xx_CPUCLK_MAX        - maximum allowed CPU clock
 	CONFIG_8xx_CPUCLK_DEFAULT - default CPU clock value
 
 If the "cpuclk" environment variable value is within the CPUCLK_MIN /
diff --git a/doc/README.NetConsole b/doc/README.NetConsole
index fea8e3364..94c881676 100644
--- a/doc/README.NetConsole
+++ b/doc/README.NetConsole
@@ -22,21 +22,11 @@ For example, if your server IP is 192.168.1.1, you could use:
 
 On the host side, please use this script to access the console:
 
-+++++++++++++++++++++++++++++++++++++++++++
-#! /bin/bash
-
-[ $# = 1 ] || { echo "Usage: $0 target_ip" >&2 ; exit 1 ; }
-TARGET_IP=$1
+	tools/netconsole <ip> [port]
 
-stty -icanon -echo intr ^T
-nc -u -l -p 6666 < /dev/null &
-nc -u ${TARGET_IP} 6666
-stty icanon echo intr ^C
-+++++++++++++++++++++++++++++++++++++++++++
-
-The script expects exactly one argument, which is interpreted as  the
-target IP address (or host name, assuming DNS is working). The script
-can be interrupted by pressing ^T (CTRL-T).
+The script uses netcat to talk to the board over UDP.  It requires you to
+specify the target IP address (or host name, assuming DNS is working). The
+script can be interrupted by pressing ^T (CTRL-T).
 
 Be aware that in some distributives (Fedora Core 5 at least)
 usage of nc has been changed and -l and -p options are considered
diff --git a/doc/README.PIP405 b/doc/README.PIP405
index 610ff2161..d8b3f9c01 100644
--- a/doc/README.PIP405
+++ b/doc/README.PIP405
@@ -100,9 +100,9 @@ CONFIG_ATAPI	enables ATAPI Support
 SCSI support (experimental) only SYM53C8xx supported
 ----------------------------------------------------
 CONFIG_SCSI_SYM53C8XX		type of SCSI controller
-CFG_SCSI_MAX_LUN	8	number of supported LUNs
-CFG_SCSI_MAX_SCSI_ID	7	maximum SCSI ID (0..6)
-CFG_SCSI_MAX_DEVICE	CFG_SCSI_MAX_SCSI_ID * CFG_SCSI_MAX_LUN
+CONFIG_SYS_SCSI_MAX_LUN	8	number of supported LUNs
+CONFIG_SYS_SCSI_MAX_SCSI_ID	7	maximum SCSI ID (0..6)
+CONFIG_SYS_SCSI_MAX_DEVICE	CONFIG_SYS_SCSI_MAX_SCSI_ID * CONFIG_SYS_SCSI_MAX_LUN
 				maximum of Target devices (multiple LUN support
 				for boot)
 
@@ -125,32 +125,24 @@ CONFIG_VIDEO_CT69000		Enable Chips & Technologies 69000 Video chip
 
 External peripheral base address:
 ---------------------------------
-CFG_ISA_IO_BASE_ADDRESS		address of all ISA-bus related parts
+CONFIG_SYS_ISA_IO_BASE_ADDRESS		address of all ISA-bus related parts
 				_must_ be defined for ISA-bus parts
 
 Identify:
 ---------
 CONFIG_IDENT_STRING		added to the U_BOOT_VERSION String
 
-
-I2C stuff:
-----------
-CFG_EEPROM_PAGE_WRITE_ENABLE	enables page write of the I2C EEPROM
-				CFG_EEPROM_PAGE_WRITE_BITS _must_ be
-				defined.
-
-
 Environment / Console:
 ----------------------
 
-CFG_CONSOLE_IS_IN_ENV		if defined, stdin, stdout and stderr used from
+CONFIG_SYS_CONSOLE_IS_IN_ENV		if defined, stdin, stdout and stderr used from
 				the values stored in the evironment.
 
-CFG_CONSOLE_OVERWRITE_ROUTINE	if defined, console_overwrite() decides if the
+CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE	if defined, console_overwrite() decides if the
 				values stored in the environment or the standard
 				serial in/out put should be assigned to the console.
 
-CFG_CONSOLE_ENV_OVERWRITE	if defined, the start-up console switching
+CONFIG_SYS_CONSOLE_ENV_OVERWRITE	if defined, the start-up console switching
 				are stored in the environment.
 
 PIP405 specific:
@@ -169,7 +161,7 @@ Added Devices:
 
 Floppy support:
 ---------------
-Support of a standard floppy disk controller at address CFG_ISA_IO_BASE_ADDRESS
+Support of a standard floppy disk controller at address CONFIG_SYS_ISA_IO_BASE_ADDRESS
 + 0x3F0. Enabled with define CONFIG_CMD_FDC. Reads a unformated floppy disk
 with a image header (see: mkimage). No interrupts and no DMA are used for this.
 Added files:
@@ -181,7 +173,7 @@ SCSI support:
 Support for Symbios SYM53C810A chip. Implemented as follows:
 - without disconnect
 - only asynchrounous
-- multiple LUN support (caution, needs a lot of RAM. define CFG_SCSI_MAX_LUN 1 to
+- multiple LUN support (caution, needs a lot of RAM. define CONFIG_SYS_SCSI_MAX_LUN 1 to
   save RAM)
 - multiple SCSI ID support
 - no write support
@@ -205,7 +197,7 @@ ATAPI support (IDE changes):
 ----------------------------
 Added ATAPI support (with CONFIG_ATAPI) in the file cmd_ide.c.
 To support a hardreset, when the IDE reset pin is not connected to the
-CFG_PC_IDE_RESET pin, the switch CONFIG_IDE_RESET_ROUTINE has been added. When
+CONFIG_SYS_PC_IDE_RESET pin, the switch CONFIG_IDE_RESET_ROUTINE has been added. When
 this switch is enabled the routine void ide_set_reset(int idereset) must be
 within the board specific files.
 Only read from ATAPI devices are supported.
@@ -250,7 +242,7 @@ changed files:
 MC146818 RTC support:
 ---------------------
 Added support for MC146818 RTC with defining CONFIG_RTC_MC146818. The ISA bus IO
-base address must be defined with CFG_ISA_IO_BASE_ADDRESS.
+base address must be defined with CONFIG_SYS_ISA_IO_BASE_ADDRESS.
 Added files:
 - rtc/mc146818.c
 
@@ -307,7 +299,7 @@ I2C Stuff:
 ----------
 Added defined(CONFIG_PIP405) at several points in common/cmd_i2c.c.
 Added 16bit read/write support for I2C (PPC405), and page write to
-I2C EEPROM if defined CFG_EEPROM_PAGE_WRITE_ENABLE.
+I2C EEPROM if defined CONFIG_SYS_EEPROM_PAGE_WRITE_ENABLE.
 Changed files:
 - cpu/ppc4xx/i2c.c
 - common/cmd_i2c.c
@@ -316,11 +308,11 @@ Environment / Console:
 ----------------------
 Although in README.console described, the U-Boot has not assinged the values
 found in the environment to the console. Corrected this behavior, but only if
-CFG_CONSOLE_IS_IN_ENV is defined.
-If CFG_CONSOLE_OVERWRITE_ROUTINE is defined, console_overwrite() decides if the
+CONFIG_SYS_CONSOLE_IS_IN_ENV is defined.
+If CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE is defined, console_overwrite() decides if the
 values stored in the environment or the standard serial in/output should be
 assigned to the console. This is useful if the environment values are not correct.
-If CFG_CONSOLE_ENV_OVERWRITE is defined the devices assigned to the console at
+If CONFIG_SYS_CONSOLE_ENV_OVERWRITE is defined the devices assigned to the console at
 start-up time will be written to the environment. This means that if the
 environment values are overwritten by the overwrite_console() routine, they will be
 stored in the environment.
diff --git a/doc/README.PXA_CF b/doc/README.PXA_CF
index e443d3959..6a0f236d3 100644
--- a/doc/README.PXA_CF
+++ b/doc/README.PXA_CF
@@ -12,35 +12,35 @@ are imposed by the PXA architecture.
 #define CONFIG_PCMCIA_SLOT_A 1
 /* just to keep build system happy  */
 
-#define CFG_PCMCIA_MEM_ADDR     0x28000000
-#define CFG_PCMCIA_MEM_SIZE     0x10000000
-
-#define CFG_MECR_VAL		0x00000000
-#define CFG_MCMEM0_VAL		0x00004204
-#define CFG_MCMEM1_VAL		0x00000000
-#define CFG_MCATT0_VAL		0x00010504
-#define CFG_MCATT1_VAL		0x00000000
-#define CFG_MCIO0_VAL		0x00008407
-#define CFG_MCIO1_VAL		0x00000000
+#define CONFIG_SYS_PCMCIA_MEM_ADDR     0x28000000
+#define CONFIG_SYS_PCMCIA_MEM_SIZE     0x10000000
+
+#define CONFIG_SYS_MECR_VAL		0x00000000
+#define CONFIG_SYS_MCMEM0_VAL		0x00004204
+#define CONFIG_SYS_MCMEM1_VAL		0x00000000
+#define CONFIG_SYS_MCATT0_VAL		0x00010504
+#define CONFIG_SYS_MCATT1_VAL		0x00000000
+#define CONFIG_SYS_MCIO0_VAL		0x00008407
+#define CONFIG_SYS_MCIO1_VAL		0x00000000
 /* memory configuration */
 
-#define CFG_IDE_MAXBUS		1
+#define CONFIG_SYS_IDE_MAXBUS		1
 /* max. 1 IDE bus		*/
-#define CFG_IDE_MAXDEVICE	1
+#define CONFIG_SYS_IDE_MAXDEVICE	1
 /* max. 1 drive per IDE bus	*/
 
-#define CFG_ATA_IDE0_OFFSET	0x0000
+#define CONFIG_SYS_ATA_IDE0_OFFSET	0x0000
 
-#define CFG_ATA_BASE_ADDR	0x20000000
+#define CONFIG_SYS_ATA_BASE_ADDR	0x20000000
 
 /* Offset for data I/O			*/
-#define CFG_ATA_DATA_OFFSET	0x1f0
+#define CONFIG_SYS_ATA_DATA_OFFSET	0x1f0
 
 /* Offset for normal register accesses	*/
-#define CFG_ATA_REG_OFFSET	0x1f0
+#define CONFIG_SYS_ATA_REG_OFFSET	0x1f0
 
 /* Offset for alternate registers	*/
-#define CFG_ATA_ALT_OFFSET	0x3f0
+#define CONFIG_SYS_ATA_ALT_OFFSET	0x3f0
 
 
 Another important point is that maybe you have to power the pcmcia
diff --git a/doc/README.TQM8260 b/doc/README.TQM8260
index 05710954e..b93a1cb94 100644
--- a/doc/README.TQM8260
+++ b/doc/README.TQM8260
@@ -52,7 +52,7 @@ CONFIG_82xx_CONS_SMC2
 
 	If defined, SMC2 will be used as the console
 
-CFG_INIT_LOCAL_SDRAM
+CONFIG_SYS_INIT_LOCAL_SDRAM
 
 	If defined, the SDRAM on the local bus will be initialized and
 	mapped at BR2.
diff --git a/doc/README.adnpesc1 b/doc/README.adnpesc1
index 5257f18b4..f9566b8ee 100644
--- a/doc/README.adnpesc1
+++ b/doc/README.adnpesc1
@@ -78,7 +78,7 @@ configuration settings occupies about 97 KBytes of flash.
 A minimal configuration occupies less than 70 KByte
 (network, SPI, POST and board command support disabled). You
 can save more memory by deactivating the Hu-Shell support and
-long command help (CFG_HUSH_PARSER, CFG_LONGHELP).
+long command help (CONFIG_SYS_HUSH_PARSER, CONFIG_SYS_LONGHELP).
 
 To program U-Boot into the ADNP/ESC1 flash using GERMS do the
 following:
@@ -193,24 +193,24 @@ you have to check-up the next environment variables:
 	- this is the startup address for autoboot
 	- each Nios application code we want to update will be copied
 	  to this address
-	- default is CFG_ADNPESC1_NIOS_APPL_ENTRY
+	- default is CONFIG_SYS_ADNPESC1_NIOS_APPL_ENTRY
 
 3. appl_end_addr
 
 	- Nios application area end address (usually in Flash)
 	- will be used to unprotect/erase the Flash area while updating
-	- default is CFG_ADNPESC1_NIOS_APPL_END
+	- default is CONFIG_SYS_ADNPESC1_NIOS_APPL_END
 
 4. appl_ident_addr
 
 	- address of the Nios application identification string
 	- this is the address checked-up by autoboot
-	- default is CFG_ADNPESC1_NIOS_APPL_IDENT
+	- default is CONFIG_SYS_ADNPESC1_NIOS_APPL_IDENT
 
 5. appl_ident_str
 
 	- the Nios application identification string itself
-	- default is CFG_ADNPESC1_NIOS_IDENTIFIER
+	- default is CONFIG_SYS_ADNPESC1_NIOS_IDENTIFIER
 
 6. appl_name
 
@@ -221,13 +221,13 @@ you have to check-up the next environment variables:
 
 	- optionally file system area start address (usually in Flash)
 	- each file system we want to update will be copied to this address
-	- default is CFG_ADNPESC1_FILESYSTEM_BASE
+	- default is CONFIG_SYS_ADNPESC1_FILESYSTEM_BASE
 
 8. fs_end_addr
 
 	- optionally file system area end address (usually in Flash)
 	- will be used to unprotect/erase the Flash area while updating
-	- default is CFG_ADNPESC1_FILESYSTEM_END
+	- default is CONFIG_SYS_ADNPESC1_FILESYSTEM_END
 
 9. fs_name
 
diff --git a/doc/README.adnpesc1_base32 b/doc/README.adnpesc1_base32
index 145e8cdad..e6fb7a47d 100644
--- a/doc/README.adnpesc1_base32
+++ b/doc/README.adnpesc1_base32
@@ -18,39 +18,39 @@ CPU:	"DNP_ESC1"
 	no Debug Core
 	no On Chip Instrumentation (OCI)
 
-	U-Boot CFG:	CFG_NIOS_CPU_CLK	     = 50000000
-			CFG_NIOS_CPU_ICACHE	     = (not present)
-			CFG_NIOS_CPU_DCACHE	     = (not present)
-			CFG_NIOS_CPU_REG_NUMS	     = 512
-			CFG_NIOS_CPU_MUL	     = 0
-			CFG_NIOS_CPU_MSTEP	     = 1
-			CFG_NIOS_CPU_DBG_CORE	     = 0
+	U-Boot CFG:	CONFIG_SYS_NIOS_CPU_CLK	     = 50000000
+			CONFIG_SYS_NIOS_CPU_ICACHE	     = (not present)
+			CONFIG_SYS_NIOS_CPU_DCACHE	     = (not present)
+			CONFIG_SYS_NIOS_CPU_REG_NUMS	     = 512
+			CONFIG_SYS_NIOS_CPU_MUL	     = 0
+			CONFIG_SYS_NIOS_CPU_MSTEP	     = 1
+			CONFIG_SYS_NIOS_CPU_DBG_CORE	     = 0
 
 IRQ:	 Nr.  | used by
 	------+--------------------------------------------------------
-	 16   | TIMER0	  |  CFG_NIOS_CPU_TIMER0_IRQ = 16
-	 17   | UART0	  |  CFG_NIOS_CPU_UART0_IRQ  = 17
-	 18   | UART1	  |  CFG_NIOS_CPU_UART1_IRQ  = 18
-	 20   | LAN91C111 |  CFG_NIOS_CPU_LAN0_IRQ   =
-	      | PIO6	  |  CFG_NIOS_CPU_PIO6_IRQ   = 20
-	 25   | SPI0	  |  CFG_NIOS_CPU_SPI0_IRQ   = 25
-	 31   | PIO7	  |  CFG_NIOS_CPU_PIO7_IRQ   = 31
-	 32   | PIO8	  |  CFG_NIOS_CPU_PIO8_IRQ   = 32
-	 33   | PIO9	  |  CFG_NIOS_CPU_PIO9_IRQ   = 33
-	 34   | PIO10	  |  CFG_NIOS_CPU_PIO10_IRQ  = 34
-	 35   | PIO11	  |  CFG_NIOS_CPU_PIO11_IRQ  = 35
-	 36   | PIO12	  |  CFG_NIOS_CPU_PIO12_IRQ  =
-	      | IDE0	  |  CFG_NIOS_CPU_IDE0_IRQ   = 36
-	 37   | PIO13	  |  CFG_NIOS_CPU_PIO13_IRQ  =
-	      | IDE1	  |  CFG_NIOS_CPU_IDE1_IRQ   = 37
+	 16   | TIMER0	  |  CONFIG_SYS_NIOS_CPU_TIMER0_IRQ = 16
+	 17   | UART0	  |  CONFIG_SYS_NIOS_CPU_UART0_IRQ  = 17
+	 18   | UART1	  |  CONFIG_SYS_NIOS_CPU_UART1_IRQ  = 18
+	 20   | LAN91C111 |  CONFIG_SYS_NIOS_CPU_LAN0_IRQ   =
+	      | PIO6	  |  CONFIG_SYS_NIOS_CPU_PIO6_IRQ   = 20
+	 25   | SPI0	  |  CONFIG_SYS_NIOS_CPU_SPI0_IRQ   = 25
+	 31   | PIO7	  |  CONFIG_SYS_NIOS_CPU_PIO7_IRQ   = 31
+	 32   | PIO8	  |  CONFIG_SYS_NIOS_CPU_PIO8_IRQ   = 32
+	 33   | PIO9	  |  CONFIG_SYS_NIOS_CPU_PIO9_IRQ   = 33
+	 34   | PIO10	  |  CONFIG_SYS_NIOS_CPU_PIO10_IRQ  = 34
+	 35   | PIO11	  |  CONFIG_SYS_NIOS_CPU_PIO11_IRQ  = 35
+	 36   | PIO12	  |  CONFIG_SYS_NIOS_CPU_PIO12_IRQ  =
+	      | IDE0	  |  CONFIG_SYS_NIOS_CPU_IDE0_IRQ   = 36
+	 37   | PIO13	  |  CONFIG_SYS_NIOS_CPU_PIO13_IRQ  =
+	      | IDE1	  |  CONFIG_SYS_NIOS_CPU_IDE1_IRQ   = 37
 
 MEMORY:	 8 MByte Flash
 	16 MByte SDRAM
 
 Timer:	TIMER0: high priority programmable timer (IRQ16)
 
-	U-Boot CFG:	CFG_NIOS_CPU_TICK_TIMER	     = 0
-			CFG_NIOS_CPU_USER_TIMER	     = (not present)
+	U-Boot CFG:	CONFIG_SYS_NIOS_CPU_TICK_TIMER	     = 0
+			CONFIG_SYS_NIOS_CPU_USER_TIMER	     = (not present)
 
 PIO:	 Nr.  | description
 	------+--------------------------------------------------------
@@ -71,13 +71,13 @@ PIO:	 Nr.  | description
 	 PIO13| INT7:	    1 input for general purpose irq (IRQ37)
 	      | IDE1INT:     (same) for IDE1 irq input
 
-	U-Boot CFG:	CFG_NIOS_CPU_PORTA_PIO	     = 0
-			CFG_NIOS_CPU_PORTB_PIO	     = 1
-			CFG_NIOS_CPU_PORTC_PIO	     = 2
-			CFG_NIOS_CPU_RCM_PIO	     = 3
-			CFG_NIOS_CPU_WDTENA_PIO	     = 4
-			CFG_NIOS_CPU_WDTTRIG_PIO     = 5
-			CFG_NIOS_CPU_LED_PIO	     = (not present)
+	U-Boot CFG:	CONFIG_SYS_NIOS_CPU_PORTA_PIO	     = 0
+			CONFIG_SYS_NIOS_CPU_PORTB_PIO	     = 1
+			CONFIG_SYS_NIOS_CPU_PORTC_PIO	     = 2
+			CONFIG_SYS_NIOS_CPU_RCM_PIO	     = 3
+			CONFIG_SYS_NIOS_CPU_WDTENA_PIO	     = 4
+			CONFIG_SYS_NIOS_CPU_WDTTRIG_PIO     = 5
+			CONFIG_SYS_NIOS_CPU_LED_PIO	     = (not present)
 
 UART:	UART0: fixed baudrate of 115200, fixed protocol 8N1, RTS/CTS (IRQ17)
 	UART1: fixed baudrate of 115200, fixed protocol 8N1,
@@ -104,28 +104,28 @@ IDE:	(TODO)
   0x44000000 ---32-----------16|15------------0-
 	       |	       |	       | \
 	       :  (real size   :	       : |
-  EXT3 (CS4)   :   and content :	       :  > CFG_NIOS_CPU_CS3_SIZE
+  EXT3 (CS4)   :   and content :	       :  > CONFIG_SYS_NIOS_CPU_CS3_SIZE
 	       :   unknown)    :	       : |   = 0x01000000
 	       |	       |	       | /
-  0x43000000 ---32-----------16|15------------0-    CFG_NIOS_CPU_CS3_BASE
+  0x43000000 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_CS3_BASE
 	       |	       |	       | \
 	       :  (real size   :	       : |
-  EXT2 (CS3)   :   and content :	       :  > CFG_NIOS_CPU_CS2_SIZE
+  EXT2 (CS3)   :   and content :	       :  > CONFIG_SYS_NIOS_CPU_CS2_SIZE
 	       :   unknown)    :	       : |   = 0x01000000
 	       |	       |	       | /
-  0x42000000 ---32-----------16|15------------0-    CFG_NIOS_CPU_CS2_BASE
+  0x42000000 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_CS2_BASE
 	       |	       |	       | \
 	       :  (real size   :	       : |
-  EXT1 (CS2)   :   and content :	       :  > CFG_NIOS_CPU_CS1_SIZE
+  EXT1 (CS2)   :   and content :	       :  > CONFIG_SYS_NIOS_CPU_CS1_SIZE
 	       :   unknown)    :	       : |   = 0x01000000
 	       |	       |	       | /
-  0x41000000 ---32-----------16|15------------0-    CFG_NIOS_CPU_CS1_BASE
+  0x41000000 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_CS1_BASE
 	       |	       |	       | \
 	       :  (real size   :	       : |
-  EXT0 (CS1)   :   and content :	       :  > CFG_NIOS_CPU_CS0_SIZE
+  EXT0 (CS1)   :   and content :	       :  > CONFIG_SYS_NIOS_CPU_CS0_SIZE
 	       :   unknown)    :	       : |   = 0x01000000
 	       |	       |	       | /
-  0x40000000 ---32-----------16|15------------0-    CFG_NIOS_CPU_CS0_BASE
+  0x40000000 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_CS0_BASE
 	       |			       |
 	       :	      gap	       :
 	       :			       :
@@ -135,23 +135,23 @@ IDE:	(TODO)
 	       :			       :
 	       :	      gap	       :
 	       |			       |
-  0x03000000 ---32-----------16|15------------0-    CFG_NIOS_CPU_STACK
+  0x03000000 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_STACK
 	       |	       .	       | \
 	       |	       .	       | |  (U-Boot run-time system)
 	       |	       .	       | |
-	       |	       .	       |  > CFG_MONITOR_LEN
+	       |	       .	       |  > CONFIG_SYS_MONITOR_LEN
 	       |	       .	       | |   = 0x00040000
 	       |	       .	       | |
 	       |	       .	       | /
   0x02fc0000 --+32-----------16|15------------0+    TEXT_BASE
 	       |	       .	       | \
-	       |	       .	       |  > CFG_MALLOC_LEN (heap)
+	       |	       .	       |  > CONFIG_SYS_MALLOC_LEN (heap)
 	       |	       .	       | /
 	     --+32-----------16|15------------0+
 	       |	       .	       | \
-	       |	       .	       |  > CFG_GBL_DATA_SIZE (global)
+	       |	       .	       |  > CONFIG_SYS_GBL_DATA_SIZE (global)
 	       |	       .	       | /
-	     --+32-----------16|15------------0+    CFG_INIT_SP (u-boot stack)
+	     --+32-----------16|15------------0+    CONFIG_SYS_INIT_SP (u-boot stack)
 	       |	       .	       | \ \
 	       |	       .	       | | |
 	       |	       .	       | |  > stack area
@@ -159,17 +159,17 @@ IDE:	(TODO)
 	       |	       .	       | | V
 	       |	       .	       | |
 	       |	       .	       | |
-  SDRAM	       |	       .	       |  > CFG_NIOS_CPU_SDRAM_SIZE
+  SDRAM	       |	       .	       |  > CONFIG_SYS_NIOS_CPU_SDRAM_SIZE
 	       |	       .	       | |   = 0x01000000
 	       |	       .	       | |
   0x02000100   |- - - - - - - - - - - - - - - -+-|-
 	       |	       .	       | | \
 	       |	       .	       | | |
-	       |	       .	       | |  > CFG_NIOS_CPU_VEC_SIZE
+	       |	       .	       | |  > CONFIG_SYS_NIOS_CPU_VEC_SIZE
 	       |	       .	       | | |   = 0x00000100
 	       |			       | / /
-  0x02000000   |- - - - - - - - - - - - - - - -+- - CFG_NIOS_CPU_VEC_BASE
-  0x02000000 ---32-----------16|15------------0-    CFG_NIOS_CPU_SDRAM_BASE
+  0x02000000   |- - - - - - - - - - - - - - - -+- - CONFIG_SYS_NIOS_CPU_VEC_BASE
+  0x02000000 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_SDRAM_BASE
 	       |			       | \
 	       :	      gap	       :  > (space for 2nd Flash)
 	       |			       | /
@@ -177,11 +177,11 @@ IDE:	(TODO)
 	       |  sector 127		       | \
     + 0x7f0000 |- - - - - - - - - - - - - - - -| |
 	       |	       :	       | |
-  Flash	       |-   -	-   -  :  -   -	  -   -|  > CFG_NIOS_CPU_FLASH_SIZE
+  Flash	       |-   -	-   -  :  -   -	  -   -|  > CONFIG_SYS_NIOS_CPU_FLASH_SIZE
 	       |  sector 1     :	       | |   = 0x00800000
     + 0x010000 |- - - - - - - - - - - - - - - -| |
 	       |  sector 0 (size = 0x10000)    | /
-  0x01000000 ---8-------------4|3-------------0-    CFG_NIOS_CPU_FLASH_BASE
+  0x01000000 ---8-------------4|3-------------0-    CONFIG_SYS_NIOS_CPU_FLASH_BASE
 	       |			       |
 	       :	      gap	       :
 	       :			       :
@@ -207,7 +207,7 @@ IDE:	(TODO)
 	       | |- - - - - - -|- - - - - - -| | |
 	       | | EPH STATUS  | TCR	     | | |
 	       | +---------------------------+ | /
-  0x00010000 ---32-----------16|15------------0-    CFG_NIOS_CPU_LAN0_BASE
+  0x00010000 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_LAN0_BASE
 	       |			       |
 	       :	      gap	       :
 	       :			       :
@@ -223,13 +223,13 @@ IDE:	(TODO)
   IDE1 i/f     :	       :	       :  > 0x00000020
   [5]	       :	       :	       : |
 	       |	       |	       | /
-  0x00001020 ---32-----------16|15------------0-    CFG_NIOS_CPU_IDE1
+  0x00001020 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_IDE1
 	       |	       |	       | \
 	       :	       :	       : |
   IDE0 i/f     :	       :	       :  > 0x00000020
   [5]	       :	       :	       : |
 	       |	       |	       | /
-  0x00001000 ---32-----------16|15------------0-    CFG_NIOS_CPU_IDE0
+  0x00001000 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_IDE0
 	       |			       |
 	       :	      gap	       :
 	       |			       |
@@ -241,7 +241,7 @@ IDE:	(TODO)
 	       |		     (unused)  | |
 	+ 0x04 |- - - - - - - - - - - - - - - -| |
 	       |  data (1 bit)		 (ro)  | /
-  0x00000970 ---32-----------16|15------------0-    CFG_NIOS_CPU_PIO13
+  0x00000970 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_PIO13
 	       |  edgecapture (1 bit)	 (rw)  | \
 	+ 0x0c |- - - - - - - - - - - - - - - -| |
   PIO12        |  interruptmask (1 bit)	 (rw)  | |
@@ -249,7 +249,7 @@ IDE:	(TODO)
 	       |		     (unused)  | |
 	+ 0x04 |- - - - - - - - - - - - - - - -| |
 	       |  data (1 bit)		 (ro)  | /
-  0x00000960 ---32-----------16|15------------0-    CFG_NIOS_CPU_PIO12
+  0x00000960 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_PIO12
 	       |  edgecapture (1 bit)	 (rw)  | \
 	+ 0x0c |- - - - - - - - - - - - - - - -| |
   PIO11        |  interruptmask (1 bit)	 (rw)  | |
@@ -257,7 +257,7 @@ IDE:	(TODO)
 	       |		     (unused)  | |
 	+ 0x04 |- - - - - - - - - - - - - - - -| |
 	       |  data (1 bit)		 (ro)  | /
-  0x00000950 ---32-----------16|15------------0-    CFG_NIOS_CPU_PIO11
+  0x00000950 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_PIO11
 	       |  edgecapture (1 bit)	 (rw)  | \
 	+ 0x0c |- - - - - - - - - - - - - - - -| |
   PIO10        |  interruptmask (1 bit)	 (rw)  | |
@@ -265,7 +265,7 @@ IDE:	(TODO)
 	       |		     (unused)  | |
 	+ 0x04 |- - - - - - - - - - - - - - - -| |
 	       |  data (1 bit)		 (ro)  | /
-  0x00000940 ---32-----------16|15------------0-    CFG_NIOS_CPU_PIO10
+  0x00000940 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_PIO10
 	       |  edgecapture (1 bit)	 (rw)  | \
 	+ 0x0c |- - - - - - - - - - - - - - - -| |
   PIO9         |  interruptmask (1 bit)	 (rw)  | |
@@ -273,7 +273,7 @@ IDE:	(TODO)
 	       |		     (unused)  | |
 	+ 0x04 |- - - - - - - - - - - - - - - -| |
 	       |  data (1 bit)		 (ro)  | /
-  0x00000930 ---32-----------16|15------------0-    CFG_NIOS_CPU_PIO9
+  0x00000930 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_PIO9
 	       |  edgecapture (1 bit)	 (rw)  | \
 	+ 0x0c |- - - - - - - - - - - - - - - -| |
   PIO8         |  interruptmask (1 bit)	 (rw)  | |
@@ -281,7 +281,7 @@ IDE:	(TODO)
 	       |		     (unused)  | |
 	+ 0x04 |- - - - - - - - - - - - - - - -| |
 	       |  data (1 bit)		 (ro)  | /
-  0x00000920 ---32-----------16|15------------0-    CFG_NIOS_CPU_PIO8
+  0x00000920 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_PIO8
 	       |  edgecapture (1 bit)	 (rw)  | \
 	+ 0x0c |- - - - - - - - - - - - - - - -| |
   PIO7         |  interruptmask (1 bit)	 (rw)  | |
@@ -289,7 +289,7 @@ IDE:	(TODO)
 	       |		     (unused)  | |
 	+ 0x04 |- - - - - - - - - - - - - - - -| |
 	       |  data (1 bit)		 (ro)  | /
-  0x00000910 ---32-----------16|15------------0-    CFG_NIOS_CPU_PIO7
+  0x00000910 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_PIO7
 	       |  edgecapture (1 bit)	 (rw)  | \
 	+ 0x0c |- - - - - - - - - - - - - - - -| |
   PIO6         |  interruptmask (1 bit)	 (rw)  | |
@@ -297,7 +297,7 @@ IDE:	(TODO)
 	       |		     (unused)  | |
 	+ 0x04 |- - - - - - - - - - - - - - - -| |
 	       |  data (1 bit)		 (ro)  | /
-  0x00000900 ---32-----------16|15------------0-    CFG_NIOS_CPU_PIO6
+  0x00000900 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_PIO6
 	       |			       |
 	       :	      gap	       :
 	       |			       |
@@ -317,7 +317,7 @@ IDE:	(TODO)
 	       |  txdata (16 bit)	 (wo)  | |
 	+ 0x04 |- - - - - - - - - - - - - - - -| |
 	       |  rxdata (16 bit)	 (ro)  | /
-  0x000008c0 ---32-----------16|15------------0-    CFG_NIOS_CPU_SPI0
+  0x000008c0 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_SPI0
 	       |		     (unused)  | \
 	+ 0x0c |- - - - - - - - - - - - - - - -| |
   PIO5	       |		     (unused)  | |
@@ -325,7 +325,7 @@ IDE:	(TODO)
 	       |		     (unused)  | |
 	+ 0x04 |- - - - - - - - - - - - - - - -| |
 	       |  data (1 bit)		 (wo)  | /
-  0x000008b0 ---32-----------16|15------------0-    CFG_NIOS_CPU_PIO5
+  0x000008b0 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_PIO5
 	       |		     (unused)  | \
 	+ 0x0c |- - - - - - - - - - - - - - - -| |
   PIO4	       |		     (unused)  | |
@@ -333,7 +333,7 @@ IDE:	(TODO)
 	       |		     (unused)  | |
 	+ 0x04 |- - - - - - - - - - - - - - - -| |
 	       |  data (1 bit)		 (wo)  | /
-  0x000008a0 ---32-----------16|15------------0-    CFG_NIOS_CPU_PIO4
+  0x000008a0 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_PIO4
 	       |		     (unused)  | \
 	+ 0x0c |- - - - - - - - - - - - - - - -| |
   PIO3	       |		     (unused)  | |
@@ -341,7 +341,7 @@ IDE:	(TODO)
 	       |		     (unused)  | |
 	+ 0x04 |- - - - - - - - - - - - - - - -| |
 	       |  data (1 bit)		 (ro)  | /
-  0x00000890 ---32-----------16|15------------0-    CFG_NIOS_CPU_PIO3
+  0x00000890 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_PIO3
 	       |		     (unused)  | \
 	+ 0x0c |- - - - - - - - - - - - - - - -| |
   PIO2	       |		     (unused)  | |
@@ -349,7 +349,7 @@ IDE:	(TODO)
 	       |  direction (4 bit)      (rw)  | |
 	+ 0x04 |- - - - - - - - - - - - - - - -| |
 	       |  data (4 bit)		 (rw)  | /
-  0x00000880 ---32-----------16|15------------0-    CFG_NIOS_CPU_PIO2
+  0x00000880 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_PIO2
 	       |		     (unused)  | \
 	+ 0x0c |- - - - - - - - - - - - - - - -| |
   PIO1	       |		     (unused)  | |
@@ -357,7 +357,7 @@ IDE:	(TODO)
 	       |  direction (8 bit)      (rw)  | |
 	+ 0x04 |- - - - - - - - - - - - - - - -| |
 	       |  data (8 bit)		 (rw)  | /
-  0x00000870 ---32-----------16|15------------0-    CFG_NIOS_CPU_PIO1
+  0x00000870 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_PIO1
 	       |		     (unused)  | \
 	+ 0x0c |- - - - - - - - - - - - - - - -| |
   PIO0	       |		     (unused)  | |
@@ -365,7 +365,7 @@ IDE:	(TODO)
 	       |  direction (8 bit)      (rw)  | |
 	+ 0x04 |- - - - - - - - - - - - - - - -| |
 	       |  data (8 bit)		 (rw)  | /
-  0x00000860 ---32-----------16|15------------0-    CFG_NIOS_CPU_PIO0
+  0x00000860 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_PIO0
 	       |		     (unused)  | \
 	+ 0x1c |- - - - - - - - - - - - - - - -| |
 	       |		     (unused)  | |
@@ -381,7 +381,7 @@ IDE:	(TODO)
 	       |  control (4 bit)	 (rw)  | |
 	+ 0x04 |- - - - - - - - - - - - - - - -| |
 	       |  status (2 bit)	 (rw)  | /
-  0x00000840 ---32-----------16|15------------0-    CFG_NIOS_CPU_TIMER0
+  0x00000840 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_TIMER0
 	       |		     (unused)  | \
 	+ 0x1c |- - - - - - - - - - - - - - - -| |
 	       |		     (unused)  | |
@@ -397,7 +397,7 @@ IDE:	(TODO)
 	       |  txdata (8 bit)	 (wo)  | |
 	+ 0x04 |- - - - - - - - - - - - - - - -| |
 	       |  rxdata (8 bit)	 (ro)  | /
-  0x00000820 ---32-----------16|15------------0-    CFG_NIOS_CPU_UART1
+  0x00000820 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_UART1
 	       |		     (unused)  | \
 	+ 0x1c |- - - - - - - - - - - - - - - -| |
 	       |		     (unused)  | |
@@ -413,18 +413,18 @@ IDE:	(TODO)
 	       |  txdata (8 bit)	 (wo)  | |
 	+ 0x04 |- - - - - - - - - - - - - - - -| |
 	       |  rxdata (8 bit)	 (ro)  | /
-  0x00000800 ---32-----------16|15------------0-    CFG_NIOS_CPU_UART0
+  0x00000800 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_UART0
 
 - - - - - - - - - - -  on chip memory 1	  - - - - - - - - - - -
 
   0x00000800 ---32-----------16|15------------0-
 	       |	       :	       | \
 	       |	       :	       | |
-  GERMS	       |	       :	       |  > CFG_NIOS_CPU_ROM_SIZE
+  GERMS	       |	       :	       |  > CONFIG_SYS_NIOS_CPU_ROM_SIZE
 	       |	       :	       | |   = 0x00000800
 	       |	       :	       | /
-  0x00000000   |- - - - - - - - - - - - - - - -+- - CFG_NIOS_CPU_RST_VECT
-  0x00000000 ---32-----------16|15------------0-    CFG_NIOS_CPU_ROM_BASE
+  0x00000000   |- - - - - - - - - - - - - - - -+- - CONFIG_SYS_NIOS_CPU_RST_VECT
+  0x00000000 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_ROM_BASE
 
 
 ===============================================================================
diff --git a/doc/README.alaska8220 b/doc/README.alaska8220
index 8e659f3dd..0bd68d962 100644
--- a/doc/README.alaska8220
+++ b/doc/README.alaska8220
@@ -87,12 +87,12 @@ Added files:
 3.1 Explanation on NEW definitions in include/configs/alaska8220.h
     CONFIG_MPC8220	    MPC8220 specific
     CONFIG_ALASKA8220	    Alaska board specific
-    CFG_MPC8220_CLKIN	    Define Alaska Input Clock
+    CONFIG_SYS_MPC8220_CLKIN	    Define Alaska Input Clock
     CONFIG_PSC_CONSOLE	    Enable MPC8220 UART
     CONFIG_EXTUART_CONSOLE  Enable External 16552 UART
-    CFG_AMD_BOOT	    To determine the u-boot is booted from AMD or Intel
-    CFG_MBAR		    MBAR base address
-    CFG_DEFAULT_MBAR	    Reset MBAR base address
+    CONFIG_SYS_AMD_BOOT	    To determine the u-boot is booted from AMD or Intel
+    CONFIG_SYS_MBAR		    MBAR base address
+    CONFIG_SYS_DEFAULT_MBAR	    Reset MBAR base address
 
 3.2 Compilation
    export CROSS_COMPILE=cross-compile-prefix
diff --git a/doc/README.at91 b/doc/README.at91
new file mode 100644
index 000000000..838769a90
--- /dev/null
+++ b/doc/README.at91
@@ -0,0 +1,88 @@
+Atmel AT91 Evaluation kits
+
+http://atmel.com/dyn/products/tools.asp?family_id=605#1443
+
+------------------------------------------------------------------------------
+AT91SAM9260EK
+------------------------------------------------------------------------------
+
+Memory map
+	0x20000000 - 23FFFFFF	SDRAM (64 MB)
+	0xC0000000 - Cxxxxxxx	Atmel Dataflash card (J13)
+	0xD0000000 - Dxxxxxxx	Soldered Atmel Dataflash
+
+Environment variables
+
+	U-Boot environment variables can be stored at different places:
+		- Dataflash on SPI chip select 1 (default)
+		- Dataflash on SPI chip select 0 (dataflash card)
+		- Nand flash.
+
+	You can choose your storage location at config step (here for at91sam9260ek) :
+		make at91sam9260ek_config		- use data flash (spi cs1) (default)
+		make at91sam9260ek_nandflash_config	- use nand flash
+		make at91sam9260ek_dataflash_cs0_config	- use data flash (spi cs0)
+		make at91sam9260ek_dataflash_cs1_config	- use data flash (spi cs1)
+
+
+------------------------------------------------------------------------------
+AT91SAM9261EK
+------------------------------------------------------------------------------
+
+Memory map
+	0x20000000 - 23FFFFFF	SDRAM (64 MB)
+	0xC0000000 - Cxxxxxxx	Soldered Atmel Dataflash
+	0xD0000000 - Dxxxxxxx	Atmel Dataflash card (J22)
+
+Environment variables
+
+	U-Boot environment variables can be stored at different places:
+		- Dataflash on SPI chip select 0 (default)
+		- Dataflash on SPI chip select 3 (dataflash card)
+		- Nand flash.
+
+	You can choose your storage location at config step (here for at91sam9260ek) :
+		make at91sam9261ek_config		- use data flash (spi cs0) (default)
+		make at91sam9261ek_nandflash_config	- use nand flash
+		make at91sam9261ek_dataflash_cs0_config	- use data flash (spi cs0)
+		make at91sam9261ek_dataflash_cs3_config	- use data flash (spi cs3)
+
+
+------------------------------------------------------------------------------
+AT91SAM9263EK
+------------------------------------------------------------------------------
+
+Memory map
+	0x20000000 - 23FFFFFF	SDRAM (64 MB)
+	0xC0000000 - Cxxxxxxx	Atmel Dataflash card (J9)
+
+Environment variables
+
+	U-Boot environment variables can be stored at different places:
+		- Dataflash on SPI chip select 0 (dataflash card)
+		- Nand flash.
+
+	You can choose your storage location at config step (here for at91sam9260ek) :
+		make at91sam9263ek_config		- use data flash (spi cs0) (default)
+		make at91sam9263ek_nandflash_config	- use nand flash
+		make at91sam9263ek_dataflash_cs0_config	- use data flash (spi cs0)
+
+
+------------------------------------------------------------------------------
+AT91SAM9RLEK
+------------------------------------------------------------------------------
+
+Memory map
+	0x20000000 - 23FFFFFF	SDRAM (64 MB)
+	0xC0000000 - Cxxxxxxx	Soldered Atmel Dataflash
+
+Environment variables
+
+	U-Boot environment variables can be stored at different places:
+		- Dataflash on SPI chip select 0
+		- Nand flash.
+
+	You can choose your storage location at config step (here for at91sam9260ek) :
+		make at91sam9263ek_config		- use data flash (spi cs0) (default)
+		make at91sam9263ek_nandflash_config	- use nand flash
+		make at91sam9263ek_dataflash_cs0_config	- use data flash (spi cs0)
diff --git a/doc/README.cmi b/doc/README.cmi
index 884854d88..0edd50ad2 100644
--- a/doc/README.cmi
+++ b/doc/README.cmi
@@ -35,17 +35,17 @@ Memory Map:
 
 Memory Map after relocation:
 
-    0x0000 0000		CFG_SDRAM_BASE
+    0x0000 0000		CONFIG_SYS_SDRAM_BASE
 	  :
     0x000F 9FFF
 	  :
 	  :
-    0x0100 0000		CFG_IMMR (Internal memory map base adress)
+    0x0100 0000		CONFIG_SYS_IMMR (Internal memory map base adress)
 	  :
     0x0130 7FFF
 	  :
 	  :
-    0x0200 0000		CFG_FLASH_BASE
+    0x0200 0000		CONFIG_SYS_FLASH_BASE
 	  :
     0x027C FFFF
 	  :
diff --git a/doc/README.dk1c20_std32 b/doc/README.dk1c20_std32
index 521fab75f..2be12998d 100644
--- a/doc/README.dk1c20_std32
+++ b/doc/README.dk1c20_std32
@@ -20,25 +20,25 @@ CPU:	"standard_32"
 	no Debug Core
 	On Chip Instrumentation (OCI) enabled
 
-	U-Boot CFG:	CFG_NIOS_CPU_CLK	     = 50000000
-			CFG_NIOS_CPU_ICACHE	     = 4096
-			CFG_NIOS_CPU_DCACHE	     = 4096
-			CFG_NIOS_CPU_REG_NUMS	     = 256
-			CFG_NIOS_CPU_MUL	     = 0
-			CFG_NIOS_CPU_MSTEP	     = 1
-			CFG_NIOS_CPU_DBG_CORE	     = 0
+	U-Boot CFG:	CONFIG_SYS_NIOS_CPU_CLK	     = 50000000
+			CONFIG_SYS_NIOS_CPU_ICACHE	     = 4096
+			CONFIG_SYS_NIOS_CPU_DCACHE	     = 4096
+			CONFIG_SYS_NIOS_CPU_REG_NUMS	     = 256
+			CONFIG_SYS_NIOS_CPU_MUL	     = 0
+			CONFIG_SYS_NIOS_CPU_MSTEP	     = 1
+			CONFIG_SYS_NIOS_CPU_DBG_CORE	     = 0
 
 OCI:	(TODO)
 
 IRQ:	 Nr.  | used by
 	------+--------------------------------------------------------
-	 16   | TIMER0	  |  CFG_NIOS_CPU_TIMER0_IRQ = 16
-	 25   | UART0	  |  CFG_NIOS_CPU_UART0_IRQ  = 25
-	 30   | LAN91C111 |  CFG_NIOS_CPU_LAN0_IRQ   = 30
-	 35   | PIO5	  |  CFG_NIOS_CPU_PIO5_IRQ   = 35
-	 40   | PIO0	  |  CFG_NIOS_CPU_PIO0_IRQ   = 40
-	 45   | ASMI	  |  CFG_NIOS_CPU_ASMI0_IRQ  = 45
-	 50   | TIMER1	  |  CFG_NIOS_CPU_TIMER1_IRQ = 50
+	 16   | TIMER0	  |  CONFIG_SYS_NIOS_CPU_TIMER0_IRQ = 16
+	 25   | UART0	  |  CONFIG_SYS_NIOS_CPU_UART0_IRQ  = 25
+	 30   | LAN91C111 |  CONFIG_SYS_NIOS_CPU_LAN0_IRQ   = 30
+	 35   | PIO5	  |  CONFIG_SYS_NIOS_CPU_PIO5_IRQ   = 35
+	 40   | PIO0	  |  CONFIG_SYS_NIOS_CPU_PIO0_IRQ   = 40
+	 45   | ASMI	  |  CONFIG_SYS_NIOS_CPU_ASMI0_IRQ  = 45
+	 50   | TIMER1	  |  CONFIG_SYS_NIOS_CPU_TIMER1_IRQ = 50
 
 MEMORY:	 8 MByte Flash
 	 1 MByte SRAM
@@ -49,8 +49,8 @@ ASMI:	(TODO) <-- ASMI part is 4M bits
 Timer:	TIMER0: high priority programmable timer (IRQ16)
 	TIMER1: low priority fixed timer for 10 ms @ 50 MHz (IRQ50)
 
-	U-Boot CFG:	CFG_NIOS_CPU_TICK_TIMER	     = 1
-			CFG_NIOS_CPU_USER_TIMER	     = 0
+	U-Boot CFG:	CONFIG_SYS_NIOS_CPU_TICK_TIMER	     = 1
+			CONFIG_SYS_NIOS_CPU_USER_TIMER	     = 0
 
 PIO:	 Nr.  | description
 	------+--------------------------------------------------------
@@ -63,14 +63,14 @@ PIO:	 Nr.  | description
 	 PIO6 | CFPOWER:    1 output to controll CF power supply
 	 PIO7 | CFATASEL:   1 output to controll CF ATA card select
 
-	U-Boot CFG:	CFG_NIOS_CPU_BUTTON_PIO	     = 0
-			CFG_NIOS_CPU_LCD_PIO	     = 1
-			CFG_NIOS_CPU_LED_PIO	     = 2
-			CFG_NIOS_CPU_SEVENSEG_PIO    = 3
-			CFG_NIOS_CPU_RECONF_PIO	     = 4
-			CFG_NIOS_CPU_CFPRESENT_PIO   = 5
-			CFG_NIOS_CPU_CFPOWER_PIO     = 6
-			CFG_NIOS_CPU_CFATASEL_PIO    = 7
+	U-Boot CFG:	CONFIG_SYS_NIOS_CPU_BUTTON_PIO	     = 0
+			CONFIG_SYS_NIOS_CPU_LCD_PIO	     = 1
+			CONFIG_SYS_NIOS_CPU_LED_PIO	     = 2
+			CONFIG_SYS_NIOS_CPU_SEVENSEG_PIO    = 3
+			CONFIG_SYS_NIOS_CPU_RECONF_PIO	     = 4
+			CONFIG_SYS_NIOS_CPU_CFPRESENT_PIO   = 5
+			CONFIG_SYS_NIOS_CPU_CFPOWER_PIO     = 6
+			CONFIG_SYS_NIOS_CPU_CFATASEL_PIO    = 7
 
 UART:	UART0: fixed baudrate of 115200, fixed protocol 8N1,
 	       without handshake RTS/CTS (IRQ25)
@@ -91,10 +91,10 @@ IDE:	(TODO)
   0x02000000 ---32-----------16|15------------0-
 	       |	       :	       | \
 	       |	       :	       | |
-  SDRAM	       |	       :	       |  > CFG_NIOS_CPU_SDRAM_SIZE
+  SDRAM	       |	       :	       |  > CONFIG_SYS_NIOS_CPU_SDRAM_SIZE
 	       |	       :	       | |   = 0x01000000
 	       |	       :	       | /
-  0x01000000 ---32-----------16|15------------0-    CFG_NIOS_CPU_SDRAM_BASE
+  0x01000000 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_SDRAM_BASE
 	       |			       |
 	       :	      gap	       :
 	       :			       :
@@ -110,7 +110,7 @@ IDE:	(TODO)
   ASMI i/f     :   and content :	       :  > 0x________
   [5]	       :   unknown)    :	       : |
 	       |	       |	       | /
-  0x00920b00 ---32-----------16|15------------0-    CFG_NIOS_CPU_ASMI0
+  0x00920b00 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_ASMI0
 	       |			       |
 	       :	      gap	       :
 	       |			       |
@@ -120,7 +120,7 @@ IDE:	(TODO)
   IDE i/f      :   and content :	       :  > 0x00000080
   [6]	       :   unknown)    :	       : |
 	       |	       |	       | /
-  0x00920a00 ---32-----------16|15------------0-    CFG_NIOS_CPU_IDE0
+  0x00920a00 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_IDE0
 	       |		     (unused)  | \
 	+ 0x1c |- - - - - - - - - - - - - - - -| |
 	       |		     (unused)  | |
@@ -136,7 +136,7 @@ IDE:	(TODO)
 	       |  control (1 bit)	 (rw)  | |
 	+ 0x04 |- - - - - - - - - - - - - - - -| |
 	       |  status (2 bit)	 (rw)  | /
-  0x009209e0 ---32-----------16|15------------0-    CFG_NIOS_CPU_TIMER1
+  0x009209e0 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_TIMER1
 	       |		     (unused)  | \
 	+ 0x0c |- - - - - - - - - - - - - - - -| |
   PIO7	       |		     (unused)  | |
@@ -144,7 +144,7 @@ IDE:	(TODO)
 	       |		     (unused)  | |
 	+ 0x04 |- - - - - - - - - - - - - - - -| |
 	       |  data (1 bit)		 (wo)  | /
-  0x009209d0 ---32-----------16|15------------0-    CFG_NIOS_CPU_PIO7
+  0x009209d0 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_PIO7
 	       |		     (unused)  | \
 	+ 0x0c |- - - - - - - - - - - - - - - -| |
   PIO6	       |		     (unused)  | |
@@ -152,7 +152,7 @@ IDE:	(TODO)
 	       |		     (unused)  | |
 	+ 0x04 |- - - - - - - - - - - - - - - -| |
 	       |  data (1 bit)		 (wo)  | /
-  0x009209c0 ---32-----------16|15------------0-    CFG_NIOS_CPU_PIO6
+  0x009209c0 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_PIO6
 	       |  edgecapture (1 bit)	 (rw)  | \
 	+ 0x0c |- - - - - - - - - - - - - - - -| |
   PIO5	       |  interruptmask (1 bit)	 (rw)  | |
@@ -160,7 +160,7 @@ IDE:	(TODO)
 	       |		     (unused)  | |
 	+ 0x04 |- - - - - - - - - - - - - - - -| |
 	       |  data (1 bit)		 (ro)  | /
-  0x009209b0 ---32-----------16|15------------0-    CFG_NIOS_CPU_PIO5
+  0x009209b0 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_PIO5
 	       |		     (unused)  | \
 	+ 0x0c |- - - - - - - - - - - - - - - -| |
   PIO4	       |		     (unused)  | |
@@ -168,7 +168,7 @@ IDE:	(TODO)
 	       |  direction (1 bit)	 (rw)  | |
 	+ 0x04 |- - - - - - - - - - - - - - - -| |
 	       |  data (1 bit)		 (rw)  | /
-  0x009209a0 ---32-----------16|15------------0-    CFG_NIOS_CPU_PIO4
+  0x009209a0 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_PIO4
 	       |		     (unused)  | \
 	+ 0x0c |- - - - - - - - - - - - - - - -| |
   PIO3	       |		     (unused)  | |
@@ -176,7 +176,7 @@ IDE:	(TODO)
 	       |		     (unused)  | |
 	+ 0x04 |- - - - - - - - - - - - - - - -| |
 	       |  data (16 bit)		 (wo)  | /
-  0x00920990 ---32-----------16|15------------0-    CFG_NIOS_CPU_PIO3
+  0x00920990 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_PIO3
 	       |		     (unused)  | \
 	+ 0x0c |- - - - - - - - - - - - - - - -| |
   PIO2	       |		     (unused)  | |
@@ -184,7 +184,7 @@ IDE:	(TODO)
 	       |		     (unused)  | |
 	+ 0x04 |- - - - - - - - - - - - - - - -| |
 	       |  data (8 bit)		 (wo)  | /
-  0x00920980 ---32-----------16|15------------0-    CFG_NIOS_CPU_PIO2
+  0x00920980 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_PIO2
 	       |		     (unused)  | \
 	+ 0x0c |- - - - - - - - - - - - - - - -| |
   PIO1	       |		     (unused)  | |
@@ -192,7 +192,7 @@ IDE:	(TODO)
 	       |  direction (11 bit)	 (rw)  | |
 	+ 0x04 |- - - - - - - - - - - - - - - -| |
 	       |  data (11 bit)		 (rw)  | /
-  0x00920970 ---32-----------16|15------------0-    CFG_NIOS_CPU_PIO1
+  0x00920970 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_PIO1
 	       |  edgecapture (4 bit)	 (rw)  | \
 	+ 0x0c |- - - - - - - - - - - - - - - -| |
   PIO0	       |  interruptmask (4 bit)	 (rw)  | |
@@ -200,7 +200,7 @@ IDE:	(TODO)
 	       |		     (unused)  | |
 	+ 0x04 |- - - - - - - - - - - - - - - -| |
 	       |  data (4 bit)		 (ro)  | /
-  0x00920960 ---32-----------16|15------------0-    CFG_NIOS_CPU_PIO0
+  0x00920960 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_PIO0
 	       |		     (unused)  | \
 	+ 0x1c |- - - - - - - - - - - - - - - -| |
 	       |		     (unused)  | |
@@ -216,7 +216,7 @@ IDE:	(TODO)
 	       |  control (4 bit)	 (rw)  | |
 	+ 0x04 |- - - - - - - - - - - - - - - -| |
 	       |  status (2 bit)	 (rw)  | /
-  0x00920940 ---32-----------16|15------------0-    CFG_NIOS_CPU_TIMER0
+  0x00920940 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_TIMER0
 	       |			       | \
 	       :	      gap	       :  > (space for UART1)
 	       |			       | /
@@ -236,28 +236,28 @@ IDE:	(TODO)
 	       |  txdata (8 bit)	 (wo)  | |
 	+ 0x04 |- - - - - - - - - - - - - - - -| |
 	       |  rxdata (8 bit)	 (ro)  | /
-  0x00920900 ---32-----------16|15------------0-    CFG_NIOS_CPU_UART0
+  0x00920900 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_UART0
 
 - - - - - - - - - - -  on chip debugging  - - - - - - - - - - - - - - - - - - -
 
   0x00920900 -----------------------------------
 	       |			       | \
 	       :  (real size		       : |
-  OCI Debug    :   and content		       :  > CFG_NIOS_CPU_OCI_SIZE
+  OCI Debug    :   and content		       :  > CONFIG_SYS_NIOS_CPU_OCI_SIZE
 	       :   unknown)		       : |   = 0x00000100
 	       |			       | /
-  0x00920800 -----------------------------------    CFG_NIOS_CPU_OCI_BASE
+  0x00920800 -----------------------------------    CONFIG_SYS_NIOS_CPU_OCI_BASE
 
 - - - - - - - - - - -	on chip memory	  - - - - - - - - - - -
 
   0x00920800 ---32-----------16|15------------0-
 	       |	       :	       | \
 	       |	       :	       | |
-  GERMS	       |	       :	       |  > CFG_NIOS_CPU_ROM_SIZE
+  GERMS	       |	       :	       |  > CONFIG_SYS_NIOS_CPU_ROM_SIZE
 	       |	       :	       | |   = 0x00000800
 	       |	       :	       | /
-  0x00920000   |- - - - - - - - - - - - - - - -+- - CFG_NIOS_CPU_RST_VECT
-  0x00920000 ---32-----------16|15------------0-    CFG_NIOS_CPU_ROM_BASE
+  0x00920000   |- - - - - - - - - - - - - - - -+- - CONFIG_SYS_NIOS_CPU_RST_VECT
+  0x00920000 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_ROM_BASE
 
 - - - - - - - - - - -	 external i/o	  - - - - - - - - - - - - - - - - - - -
 
@@ -279,7 +279,7 @@ IDE:	(TODO)
 	       | +---------------------------+ | |
   0x00910300 --+--LAN91C111_REGISTERS_OFFSET---| |
 	       |	      gap	       | /
-  0x00910000 ---32-----------16|15------------0-    CFG_NIOS_CPU_LAN0_BASE
+  0x00910000 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_LAN0_BASE
 	       |			       |
 	       :	      gap	       :
 	       :			       :
@@ -293,30 +293,30 @@ IDE:	(TODO)
   0x00900000 --+32-----------16|15------------0+
 	       |	       :	       | \ \
 	       |	       :	       | | |
-	       |	       :	       | |  > CFG_NIOS_CPU_VEC_SIZE
+	       |	       :	       | |  > CONFIG_SYS_NIOS_CPU_VEC_SIZE
 	       |	       :	       | | |   = 0x00000100
 	       |	       :	       | | /
-  0x008fff00   |- - - - - - - -:- - - - - - - -+-|- CFG_NIOS_CPU_VEC_BASE
-  0x008fff00   |- - - - - - - -:- - - - - - - -+-|- CFG_NIOS_CPU_STACK
+  0x008fff00   |- - - - - - - -:- - - - - - - -+-|- CONFIG_SYS_NIOS_CPU_VEC_BASE
+  0x008fff00   |- - - - - - - -:- - - - - - - -+-|- CONFIG_SYS_NIOS_CPU_STACK
 	       |	       :	       | | \
 	       |	       :	       | | |
 	       |	       :	       | |  > stack area
 	       |	       :	       | | |
 	       |	       :	       | | V
 	       |	       :	       | |
-  SRAM	       |	       :	       |  > CFG_NIOS_CPU_SRAM_SIZE
+  SRAM	       |	       :	       |  > CONFIG_SYS_NIOS_CPU_SRAM_SIZE
 	       |	       :	       | |   = 0x00100000
 	       |	       :	       | /
-  0x00800000 ---32-----------16|15------------0-    CFG_NIOS_CPU_SRAM_BASE
+  0x00800000 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_SRAM_BASE
   0x00800000 ---8-------------4|3-------------0-
 	       |  sector 127		       | \
     + 0x7f0000 |- - - - - - - - - - - - - - - -| |
 	       |	       :	       | |
-  Flash	       |-   -	-   -  :  -   -	  -   -|  > CFG_NIOS_CPU_FLASH_SIZE
+  Flash	       |-   -	-   -  :  -   -	  -   -|  > CONFIG_SYS_NIOS_CPU_FLASH_SIZE
 	       |  sector 1     :	       | |   = 0x00800000
     + 0x010000 |- - - - - - - - - - - - - - - -| |
 	       |  sector 0 (size = 0x10000)    | /
-  0x00000000 ---8-------------4|3-------------0-    CFG_NIOS_CPU_FLASH_BASE
+  0x00000000 ---8-------------4|3-------------0-    CONFIG_SYS_NIOS_CPU_FLASH_BASE
 
 
 ===============================================================================
diff --git a/doc/README.dk1s10_mldk20 b/doc/README.dk1s10_mldk20
index fcf8170d6..74e07a93d 100644
--- a/doc/README.dk1s10_mldk20
+++ b/doc/README.dk1s10_mldk20
@@ -18,29 +18,29 @@ CPU:	"LDK2"
 	no Debug Core
 	no On Chip Instrumentation (OCI)
 
-	U-Boot CFG:	CFG_NIOS_CPU_CLK	     = 75000000
-			CFG_NIOS_CPU_ICACHE	     = (not present)
-			CFG_NIOS_CPU_DCACHE	     = (not present)
-			CFG_NIOS_CPU_REG_NUMS	     = 512
-			CFG_NIOS_CPU_MUL	     = 0
-			CFG_NIOS_CPU_MSTEP	     = 1
-			CFG_NIOS_CPU_DBG_CORE	     = 0
+	U-Boot CFG:	CONFIG_SYS_NIOS_CPU_CLK	     = 75000000
+			CONFIG_SYS_NIOS_CPU_ICACHE	     = (not present)
+			CONFIG_SYS_NIOS_CPU_DCACHE	     = (not present)
+			CONFIG_SYS_NIOS_CPU_REG_NUMS	     = 512
+			CONFIG_SYS_NIOS_CPU_MUL	     = 0
+			CONFIG_SYS_NIOS_CPU_MSTEP	     = 1
+			CONFIG_SYS_NIOS_CPU_DBG_CORE	     = 0
 
 IRQ:	 Nr.  | used by
 	------+--------------------------------------------------------
-	 16   | TIMER0	  |  CFG_NIOS_CPU_TIMER0_IRQ = 16
-	 17   | UART0	  |  CFG_NIOS_CPU_UART0_IRQ  = 17
-	 18   | UART1	  |  CFG_NIOS_CPU_UART1_IRQ  = 18
-	 20   | LAN91C111 |  CFG_NIOS_CPU_LAN0_IRQ   = 20
-	 25   | IDE0	  |  CFG_NIOS_CPU_IDE0_IRQ   = 25
+	 16   | TIMER0	  |  CONFIG_SYS_NIOS_CPU_TIMER0_IRQ = 16
+	 17   | UART0	  |  CONFIG_SYS_NIOS_CPU_UART0_IRQ  = 17
+	 18   | UART1	  |  CONFIG_SYS_NIOS_CPU_UART1_IRQ  = 18
+	 20   | LAN91C111 |  CONFIG_SYS_NIOS_CPU_LAN0_IRQ   = 20
+	 25   | IDE0	  |  CONFIG_SYS_NIOS_CPU_IDE0_IRQ   = 25
 
 MEMORY:	 8 MByte Flash
 	16 MByte SDRAM
 
 Timer:	TIMER0: high priority programmable timer (IRQ16)
 
-	U-Boot CFG:	CFG_NIOS_CPU_TICK_TIMER	     = 0
-			CFG_NIOS_CPU_USER_TIMER	     = (not present)
+	U-Boot CFG:	CONFIG_SYS_NIOS_CPU_TICK_TIMER	     = 0
+			CONFIG_SYS_NIOS_CPU_USER_TIMER	     = (not present)
 
 PIO:	 Nr.  | description
 	------+--------------------------------------------------------
@@ -54,14 +54,14 @@ PIO:	 Nr.  | description
 	      | CFPRESENT:  1 input for CF present event (IRQ35)
 	      | CFATASEL:   1 output to controll CF ATA card select
 
-	U-Boot CFG:	CFG_NIOS_CPU_BUTTON_PIO	     = 1
-			CFG_NIOS_CPU_LCD_PIO	     = (not present)
-			CFG_NIOS_CPU_LED_PIO	     = (not present)
-			CFG_NIOS_CPU_SEVENSEG_PIO    = (not present)
-			CFG_NIOS_CPU_RECONF_PIO	     = (not present)
-			CFG_NIOS_CPU_CFPRESENT_PIO   = (not present)
-			CFG_NIOS_CPU_CFPOWER_PIO     = 0
-			CFG_NIOS_CPU_CFATASEL_PIO    = (not present)
+	U-Boot CFG:	CONFIG_SYS_NIOS_CPU_BUTTON_PIO	     = 1
+			CONFIG_SYS_NIOS_CPU_LCD_PIO	     = (not present)
+			CONFIG_SYS_NIOS_CPU_LED_PIO	     = (not present)
+			CONFIG_SYS_NIOS_CPU_SEVENSEG_PIO    = (not present)
+			CONFIG_SYS_NIOS_CPU_RECONF_PIO	     = (not present)
+			CONFIG_SYS_NIOS_CPU_CFPRESENT_PIO   = (not present)
+			CONFIG_SYS_NIOS_CPU_CFPOWER_PIO     = 0
+			CONFIG_SYS_NIOS_CPU_CFATASEL_PIO    = (not present)
 
 UART:	UART0: fixed baudrate of 115200, fixed protocol 8N2,
 	       without handshake RTS/CTS (IRQ17)
@@ -81,7 +81,7 @@ IDE:	(TODO)
 
 - - - - - - - - - - -   external memory   - - - - - - - - - - - - - - - - - - -
 
-  0x02000000 ---32-----------16|15------------0-    CFG_NIOS_CPU_STACK
+  0x02000000 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_STACK
   0x02000000 --+32-----------16|15------------0+
 	       |	       .	       | \ \
 	       |	       .	       | | |
@@ -90,25 +90,25 @@ IDE:	(TODO)
 	       |	       .	       | | V
 	       |	       .	       | |
 	       |	       .	       | |
-  SDRAM	       |	       .	       |  > CFG_NIOS_CPU_SDRAM_SIZE
+  SDRAM	       |	       .	       |  > CONFIG_SYS_NIOS_CPU_SDRAM_SIZE
 	       |	       .	       | |   = 0x01000000
 	       |	       .	       | |
   0x01000100   |- - - - - - - - - - - - - - - -+-|-
 	       |	       .	       | | \
 	       |	       .	       | | |
-	       |	       .	       | |  > CFG_NIOS_CPU_VEC_SIZE
+	       |	       .	       | |  > CONFIG_SYS_NIOS_CPU_VEC_SIZE
 	       |	       .	       | | |   = 0x00000100
 	       |			       | / /
-  0x01000000   |- - - - - - - - - - - - - - - -+- - CFG_NIOS_CPU_VEC_BASE
-  0x01000000 ---32-----------16|15------------0-    CFG_NIOS_CPU_SDRAM_BASE
+  0x01000000   |- - - - - - - - - - - - - - - -+- - CONFIG_SYS_NIOS_CPU_VEC_BASE
+  0x01000000 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_SDRAM_BASE
 	       |  sector 127		       | \
     + 0x7f0000 |- - - - - - - - - - - - - - - -| |
 	       |	       :	       | |
-  Flash	       |-   -	-   -  :  -   -	  -   -|  > CFG_NIOS_CPU_FLASH_SIZE
+  Flash	       |-   -	-   -  :  -   -	  -   -|  > CONFIG_SYS_NIOS_CPU_FLASH_SIZE
 	       |  sector 1     :	       | |   = 0x00800000
     + 0x010000 |- - - - - - - - - - - - - - - -| |
 	       |  sector 0 (size = 0x10000)    | /
-  0x00800000 ---8-------------4|3-------------0-    CFG_NIOS_CPU_FLASH_BASE
+  0x00800000 ---8-------------4|3-------------0-    CONFIG_SYS_NIOS_CPU_FLASH_BASE
 	       |			       |
 	       :	      gap	       :
 	       :			       :
@@ -136,7 +136,7 @@ IDE:	(TODO)
 	       | +---------------------------+ | |
   0x00010300 --+--LAN91C111_REGISTERS_OFFSET---| |
 	       |	      gap	       | /
-  0x00010000 ---32-----------16|15------------0-    CFG_NIOS_CPU_LAN0_BASE
+  0x00010000 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_LAN0_BASE
 	       |			       |
 	       :	      gap	       :
 	       :			       :
@@ -152,7 +152,7 @@ IDE:	(TODO)
   IDE i/f      :   and content :	       :  > 0x00000080
   [5]	       :   unknown)    :	       : |
 	       |	       |	       | /
-  0x00000900 ---32-----------16|15------------0-    CFG_NIOS_CPU_IDE0
+  0x00000900 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_IDE0
 	       |			       | \
 	       :	      gap	       :  > (space for PIO4..7)
 	       |			       | /
@@ -172,7 +172,7 @@ IDE:	(TODO)
 	       |  txdata (8 bit)	 (wo)  | |
 	+ 0x04 |- - - - - - - - - - - - - - - -| |
 	       |  rxdata (8 bit)	 (ro)  | /
-  0x000008a0 ---32-----------16|15------------0-    CFG_NIOS_CPU_UART1
+  0x000008a0 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_UART1
 	       |			       | \
 	       :	      gap	       :  > (space for PIO2..3)
 	       |			       | /
@@ -184,7 +184,7 @@ IDE:	(TODO)
 	       |		     (unused)  | |
 	+ 0x04 |- - - - - - - - - - - - - - - -| |
 	       |  data (4 bit)		 (ro)  | /
-  0x00000870 ---32-----------16|15------------0-    CFG_NIOS_CPU_PIO1
+  0x00000870 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_PIO1
 	       |		     (unused)  | \
 	+ 0x0c |- - - - - - - - - - - - - - - -| |
   PIO0	       |		     (unused)  | |
@@ -192,7 +192,7 @@ IDE:	(TODO)
 	       |		     (unused)  | |
 	+ 0x04 |- - - - - - - - - - - - - - - -| |
 	       |  data (1 bit)		 (wo)  | /
-  0x00000860 ---32-----------16|15------------0-    CFG_NIOS_CPU_PIO0
+  0x00000860 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_PIO0
 	       |		     (unused)  | \
 	+ 0x1c |- - - - - - - - - - - - - - - -| |
 	       |		     (unused)  | |
@@ -208,7 +208,7 @@ IDE:	(TODO)
 	       |  control (4 bit)	 (rw)  | |
 	+ 0x04 |- - - - - - - - - - - - - - - -| |
 	       |  status (2 bit)	 (rw)  | /
-  0x00000840 ---32-----------16|15------------0-    CFG_NIOS_CPU_TIMER0
+  0x00000840 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_TIMER0
 	       |			       | \
 	       :	      gap	       :  > (space for UART2)
 	       |			       | /
@@ -228,18 +228,18 @@ IDE:	(TODO)
 	       |  txdata (8 bit)	 (wo)  | |
 	+ 0x04 |- - - - - - - - - - - - - - - -| |
 	       |  rxdata (8 bit)	 (ro)  | /
-  0x00000800 ---32-----------16|15------------0-    CFG_NIOS_CPU_UART0
+  0x00000800 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_UART0
 
 - - - - - - - - - - -  on chip memory 1	  - - - - - - - - - - -
 
   0x00000800 ---32-----------16|15------------0-
 	       |	       :	       | \
 	       |	       :	       | |
-  GERMS	       |	       :	       |  > CFG_NIOS_CPU_ROM_SIZE
+  GERMS	       |	       :	       |  > CONFIG_SYS_NIOS_CPU_ROM_SIZE
 	       |	       :	       | |   = 0x00000800
 	       |	       :	       | /
-  0x00000000   |- - - - - - - - - - - - - - - -+- - CFG_NIOS_CPU_RST_VECT
-  0x00000000 ---32-----------16|15------------0-    CFG_NIOS_CPU_ROM_BASE
+  0x00000000   |- - - - - - - - - - - - - - - -+- - CONFIG_SYS_NIOS_CPU_RST_VECT
+  0x00000000 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_ROM_BASE
 
 ===============================================================================
 	F L A S H   M E M O R Y	  A L L O C A T I O N
diff --git a/doc/README.dk1s10_std32 b/doc/README.dk1s10_std32
index d649eb379..622b2b9c8 100644
--- a/doc/README.dk1s10_std32
+++ b/doc/README.dk1s10_std32
@@ -19,24 +19,24 @@ CPU:	"standard_32"
 	no Debug Core
 	On Chip Instrumentation (OCI) enabled
 
-	U-Boot CFG:	CFG_NIOS_CPU_CLK	     = 50000000
-			CFG_NIOS_CPU_ICACHE	     = 4096
-			CFG_NIOS_CPU_DCACHE	     = 4096
-			CFG_NIOS_CPU_REG_NUMS	     = 256
-			CFG_NIOS_CPU_MUL	     = 0
-			CFG_NIOS_CPU_MSTEP	     = 1
-			CFG_NIOS_CPU_DBG_CORE	     = 0
+	U-Boot CFG:	CONFIG_SYS_NIOS_CPU_CLK	     = 50000000
+			CONFIG_SYS_NIOS_CPU_ICACHE	     = 4096
+			CONFIG_SYS_NIOS_CPU_DCACHE	     = 4096
+			CONFIG_SYS_NIOS_CPU_REG_NUMS	     = 256
+			CONFIG_SYS_NIOS_CPU_MUL	     = 0
+			CONFIG_SYS_NIOS_CPU_MSTEP	     = 1
+			CONFIG_SYS_NIOS_CPU_DBG_CORE	     = 0
 
 OCI:	(TODO)
 
 IRQ:	 Nr.  | used by
 	------+--------------------------------------------------------
-	 16   | TIMER0	  |  CFG_NIOS_CPU_TIMER0_IRQ = 16
-	 25   | UART0	  |  CFG_NIOS_CPU_UART0_IRQ  = 25
-	 30   | LAN91C111 |  CFG_NIOS_CPU_LAN0_IRQ   = 30
-	 35   | PIO5	  |  CFG_NIOS_CPU_PIO5_IRQ   = 35
-	 40   | PIO0	  |  CFG_NIOS_CPU_PIO0_IRQ   = 40
-	 50   | TIMER1	  |  CFG_NIOS_CPU_TIMER1_IRQ = 50
+	 16   | TIMER0	  |  CONFIG_SYS_NIOS_CPU_TIMER0_IRQ = 16
+	 25   | UART0	  |  CONFIG_SYS_NIOS_CPU_UART0_IRQ  = 25
+	 30   | LAN91C111 |  CONFIG_SYS_NIOS_CPU_LAN0_IRQ   = 30
+	 35   | PIO5	  |  CONFIG_SYS_NIOS_CPU_PIO5_IRQ   = 35
+	 40   | PIO0	  |  CONFIG_SYS_NIOS_CPU_PIO0_IRQ   = 40
+	 50   | TIMER1	  |  CONFIG_SYS_NIOS_CPU_TIMER1_IRQ = 50
 
 MEMORY:	 8 MByte Flash
 	 1 MByte SRAM
@@ -45,8 +45,8 @@ MEMORY:	 8 MByte Flash
 Timer:	TIMER0: high priority programmable timer (IRQ16)
 	TIMER1: low priority fixed timer for 10 ms @ 50 MHz (IRQ50)
 
-	U-Boot CFG:	CFG_NIOS_CPU_TICK_TIMER	     = 1
-			CFG_NIOS_CPU_USER_TIMER	     = 0
+	U-Boot CFG:	CONFIG_SYS_NIOS_CPU_TICK_TIMER	     = 1
+			CONFIG_SYS_NIOS_CPU_USER_TIMER	     = 0
 
 PIO:	 Nr.  | description
 	------+--------------------------------------------------------
@@ -59,14 +59,14 @@ PIO:	 Nr.  | description
 	 PIO6 | CFPOWER:    1 output to controll CF power supply
 	 PIO7 | CFATASEL:   1 output to controll CF ATA card select
 
-	U-Boot CFG:	CFG_NIOS_CPU_BUTTON_PIO	     = 0
-			CFG_NIOS_CPU_LCD_PIO	     = 1
-			CFG_NIOS_CPU_LED_PIO	     = 2
-			CFG_NIOS_CPU_SEVENSEG_PIO    = 3
-			CFG_NIOS_CPU_RECONF_PIO	     = 4
-			CFG_NIOS_CPU_CFPRESENT_PIO   = 5
-			CFG_NIOS_CPU_CFPOWER_PIO     = 6
-			CFG_NIOS_CPU_CFATASEL_PIO    = 7
+	U-Boot CFG:	CONFIG_SYS_NIOS_CPU_BUTTON_PIO	     = 0
+			CONFIG_SYS_NIOS_CPU_LCD_PIO	     = 1
+			CONFIG_SYS_NIOS_CPU_LED_PIO	     = 2
+			CONFIG_SYS_NIOS_CPU_SEVENSEG_PIO    = 3
+			CONFIG_SYS_NIOS_CPU_RECONF_PIO	     = 4
+			CONFIG_SYS_NIOS_CPU_CFPRESENT_PIO   = 5
+			CONFIG_SYS_NIOS_CPU_CFPOWER_PIO     = 6
+			CONFIG_SYS_NIOS_CPU_CFATASEL_PIO    = 7
 
 UART:	UART0: fixed baudrate of 115200, fixed protocol 8N1,
 	       without handshake RTS/CTS (IRQ25)
@@ -87,10 +87,10 @@ IDE:	(TODO)
   0x02000000 ---32-----------16|15------------0-
 	       |	       :	       | \
 	       |	       :	       | |
-  SDRAM	       |	       :	       |  > CFG_NIOS_CPU_SDRAM_SIZE
+  SDRAM	       |	       :	       |  > CONFIG_SYS_NIOS_CPU_SDRAM_SIZE
 	       |	       :	       | |   = 0x01000000
 	       |	       :	       | /
-  0x01000000 ---32-----------16|15------------0-    CFG_NIOS_CPU_SDRAM_BASE
+  0x01000000 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_SDRAM_BASE
 	       |			       |
 	       :	      gap	       :
 	       :			       :
@@ -106,7 +106,7 @@ IDE:	(TODO)
   IDE i/f      :   and content :	       :  > 0x00000080
   [5]	       :   unknown)    :	       : |
 	       |	       |	       | /
-  0x00920a00 ---32-----------16|15------------0-    CFG_NIOS_CPU_IDE0
+  0x00920a00 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_IDE0
 	       |		     (unused)  | \
 	+ 0x1c |- - - - - - - - - - - - - - - -| |
 	       |		     (unused)  | |
@@ -122,7 +122,7 @@ IDE:	(TODO)
 	       |  control (1 bit)	 (rw)  | |
 	+ 0x04 |- - - - - - - - - - - - - - - -| |
 	       |  status (2 bit)	 (rw)  | /
-  0x009209e0 ---32-----------16|15------------0-    CFG_NIOS_CPU_TIMER1
+  0x009209e0 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_TIMER1
 	       |		     (unused)  | \
 	+ 0x0c |- - - - - - - - - - - - - - - -| |
   PIO7	       |		     (unused)  | |
@@ -130,7 +130,7 @@ IDE:	(TODO)
 	       |		     (unused)  | |
 	+ 0x04 |- - - - - - - - - - - - - - - -| |
 	       |  data (1 bit)		 (wo)  | /
-  0x009209d0 ---32-----------16|15------------0-    CFG_NIOS_CPU_PIO7
+  0x009209d0 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_PIO7
 	       |		     (unused)  | \
 	+ 0x0c |- - - - - - - - - - - - - - - -| |
   PIO6	       |		     (unused)  | |
@@ -138,7 +138,7 @@ IDE:	(TODO)
 	       |		     (unused)  | |
 	+ 0x04 |- - - - - - - - - - - - - - - -| |
 	       |  data (1 bit)		 (wo)  | /
-  0x009209c0 ---32-----------16|15------------0-    CFG_NIOS_CPU_PIO6
+  0x009209c0 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_PIO6
 	       |  edgecapture (1 bit)	 (rw)  | \
 	+ 0x0c |- - - - - - - - - - - - - - - -| |
   PIO5	       |  interruptmask (1 bit)	 (rw)  | |
@@ -146,7 +146,7 @@ IDE:	(TODO)
 	       |		     (unused)  | |
 	+ 0x04 |- - - - - - - - - - - - - - - -| |
 	       |  data (1 bit)		 (ro)  | /
-  0x009209b0 ---32-----------16|15------------0-    CFG_NIOS_CPU_PIO5
+  0x009209b0 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_PIO5
 	       |		     (unused)  | \
 	+ 0x0c |- - - - - - - - - - - - - - - -| |
   PIO4	       |		     (unused)  | |
@@ -154,7 +154,7 @@ IDE:	(TODO)
 	       |  direction (1 bit)	 (rw)  | |
 	+ 0x04 |- - - - - - - - - - - - - - - -| |
 	       |  data (1 bit)		 (rw)  | /
-  0x009209a0 ---32-----------16|15------------0-    CFG_NIOS_CPU_PIO4
+  0x009209a0 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_PIO4
 	       |		     (unused)  | \
 	+ 0x0c |- - - - - - - - - - - - - - - -| |
   PIO3	       |		     (unused)  | |
@@ -162,7 +162,7 @@ IDE:	(TODO)
 	       |		     (unused)  | |
 	+ 0x04 |- - - - - - - - - - - - - - - -| |
 	       |  data (16 bit)		 (wo)  | /
-  0x00920990 ---32-----------16|15------------0-    CFG_NIOS_CPU_PIO3
+  0x00920990 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_PIO3
 	       |		     (unused)  | \
 	+ 0x0c |- - - - - - - - - - - - - - - -| |
   PIO2	       |		     (unused)  | |
@@ -170,7 +170,7 @@ IDE:	(TODO)
 	       |		     (unused)  | |
 	+ 0x04 |- - - - - - - - - - - - - - - -| |
 	       |  data (8 bit)		 (wo)  | /
-  0x00920980 ---32-----------16|15------------0-    CFG_NIOS_CPU_PIO2
+  0x00920980 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_PIO2
 	       |		     (unused)  | \
 	+ 0x0c |- - - - - - - - - - - - - - - -| |
   PIO1	       |		     (unused)  | |
@@ -178,7 +178,7 @@ IDE:	(TODO)
 	       |  direction (11 bit)	 (rw)  | |
 	+ 0x04 |- - - - - - - - - - - - - - - -| |
 	       |  data (11 bit)		 (rw)  | /
-  0x00920970 ---32-----------16|15------------0-    CFG_NIOS_CPU_PIO1
+  0x00920970 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_PIO1
 	       |  edgecapture (4 bit)	 (rw)  | \
 	+ 0x0c |- - - - - - - - - - - - - - - -| |
   PIO0	       |  interruptmask (4 bit)	 (rw)  | |
@@ -186,7 +186,7 @@ IDE:	(TODO)
 	       |		     (unused)  | |
 	+ 0x04 |- - - - - - - - - - - - - - - -| |
 	       |  data (4 bit)		 (ro)  | /
-  0x00920960 ---32-----------16|15------------0-    CFG_NIOS_CPU_PIO0
+  0x00920960 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_PIO0
 	       |		     (unused)  | \
 	+ 0x1c |- - - - - - - - - - - - - - - -| |
 	       |		     (unused)  | |
@@ -202,7 +202,7 @@ IDE:	(TODO)
 	       |  control (4 bit)	 (rw)  | |
 	+ 0x04 |- - - - - - - - - - - - - - - -| |
 	       |  status (2 bit)	 (rw)  | /
-  0x00920940 ---32-----------16|15------------0-    CFG_NIOS_CPU_TIMER0
+  0x00920940 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_TIMER0
 	       |			       | \
 	       :	      gap	       :  > (space for UART1)
 	       |			       | /
@@ -222,28 +222,28 @@ IDE:	(TODO)
 	       |  txdata (8 bit)	 (wo)  | |
 	+ 0x04 |- - - - - - - - - - - - - - - -| |
 	       |  rxdata (8 bit)	 (ro)  | /
-  0x00920900 ---32-----------16|15------------0-    CFG_NIOS_CPU_UART0
+  0x00920900 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_UART0
 
 - - - - - - - - - - -  on chip debugging  - - - - - - - - - - - - - - - - - - -
 
   0x00920900 -----------------------------------
 	       |			       | \
 	       :  (real size		       : |
-  OCI Debug    :   and content		       :  > CFG_NIOS_CPU_OCI_SIZE
+  OCI Debug    :   and content		       :  > CONFIG_SYS_NIOS_CPU_OCI_SIZE
 	       :   unknown)		       : |   = 0x00000100
 	       |			       | /
-  0x00920800 -----------------------------------    CFG_NIOS_CPU_OCI_BASE
+  0x00920800 -----------------------------------    CONFIG_SYS_NIOS_CPU_OCI_BASE
 
 - - - - - - - - - - -  on chip memory 2	  - - - - - - - - - - -
 
   0x00920800 ---32-----------16|15------------0-
 	       |	       :	       | \
 	       |	       :	       | |
-  GERMS	       |	       :	       |  > CFG_NIOS_CPU_ROM_SIZE
+  GERMS	       |	       :	       |  > CONFIG_SYS_NIOS_CPU_ROM_SIZE
 	       |	       :	       | |   = 0x00000800
 	       |	       :	       | /
-  0x00920000   |- - - - - - - - - - - - - - - -+- - CFG_NIOS_CPU_RST_VECT
-  0x00920000 ---32-----------16|15------------0-    CFG_NIOS_CPU_ROM_BASE
+  0x00920000   |- - - - - - - - - - - - - - - -+- - CONFIG_SYS_NIOS_CPU_RST_VECT
+  0x00920000 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_ROM_BASE
 
 - - - - - - - - - - -	 external i/o	  - - - - - - - - - - - - - - - - - - -
 
@@ -265,17 +265,17 @@ IDE:	(TODO)
 	       | +---------------------------+ | |
   0x00910300 --+--LAN91C111_REGISTERS_OFFSET---| |
 	       |	      gap	       | /
-  0x00910000 ---32-----------16|15------------0-    CFG_NIOS_CPU_LAN0_BASE
+  0x00910000 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_LAN0_BASE
 
 - - - - - - - - - - -  on chip memory 1	  - - - - - - - - - - -
 
   0x00910000 ---32-----------16|15------------0-
 	       |	       :	       | \
 	       |	       :	       | |
-  onchip RAM   |	       :	       |  > CFG_NIOS_CPU_RAM_SIZE
+  onchip RAM   |	       :	       |  > CONFIG_SYS_NIOS_CPU_RAM_SIZE
 	       |	       :	       | |   = 0x00010000
 	       |	       :	       | /
-  0x00900000 ---32-----------16|15------------0-    CFG_NIOS_CPU_RAM_BASE
+  0x00900000 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_RAM_BASE
 
 - - - - - - - - - - -  external memory 1  - - - - - - - - - - - - - - - - - - -
 
@@ -283,30 +283,30 @@ IDE:	(TODO)
   0x00900000 --+32-----------16|15------------0+
 	       |	       .	       | \ \
 	       |	       .	       | | |
-	       |	       .	       | |  > CFG_NIOS_CPU_VEC_SIZE
+	       |	       .	       | |  > CONFIG_SYS_NIOS_CPU_VEC_SIZE
 	       |	       .	       | | |   = 0x00000100
 	       |	       .	       | | /
-  0x008fff00   |- - - - - - - - - - - - - - - -+-|- CFG_NIOS_CPU_VEC_BASE
-  0x008fff00   |- - - - - - - - - - - - - - - -+-|- CFG_NIOS_CPU_STACK
+  0x008fff00   |- - - - - - - - - - - - - - - -+-|- CONFIG_SYS_NIOS_CPU_VEC_BASE
+  0x008fff00   |- - - - - - - - - - - - - - - -+-|- CONFIG_SYS_NIOS_CPU_STACK
 	       |	       .	       | | \
 	       |	       .	       | | |
 	       |	       .	       | |  > stack area
 	       |	       .	       | | |
 	       |	       .	       | | V
 	       |	       .	       | |
-  SRAM	       |	       .	       |  > CFG_NIOS_CPU_SRAM_SIZE
+  SRAM	       |	       .	       |  > CONFIG_SYS_NIOS_CPU_SRAM_SIZE
 	       |	       .	       | |   = 0x00100000
 	       |			       | /
-  0x00800000 ---32-----------16|15------------0-    CFG_NIOS_CPU_SRAM_BASE
+  0x00800000 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_SRAM_BASE
   0x00800000 ---8-------------4|3-------------0-
 	       |  sector 127		       | \
     + 0x7f0000 |- - - - - - - - - - - - - - - -| |
 	       |	       :	       | |
-  Flash	       |-   -	-   -  :  -   -	  -   -|  > CFG_NIOS_CPU_FLASH_SIZE
+  Flash	       |-   -	-   -  :  -   -	  -   -|  > CONFIG_SYS_NIOS_CPU_FLASH_SIZE
 	       |  sector 1     :	       | |   = 0x00800000
     + 0x010000 |- - - - - - - - - - - - - - - -| |
 	       |  sector 0 (size = 0x10000)    | /
-  0x00000000 ---8-------------4|3-------------0-    CFG_NIOS_CPU_FLASH_BASE
+  0x00000000 ---8-------------4|3-------------0-    CONFIG_SYS_NIOS_CPU_FLASH_BASE
 
 
 ===============================================================================
diff --git a/doc/README.dk1s40_std32 b/doc/README.dk1s40_std32
index 08c824445..9a0ea060c 100644
--- a/doc/README.dk1s40_std32
+++ b/doc/README.dk1s40_std32
@@ -19,24 +19,24 @@ CPU:	"standard_32"
 	no Debug Core
 	On Chip Instrumentation (OCI) enabled
 
-	U-Boot CFG:	CFG_NIOS_CPU_CLK	     = 50000000
-			CFG_NIOS_CPU_ICACHE	     = 4096
-			CFG_NIOS_CPU_DCACHE	     = 4096
-			CFG_NIOS_CPU_REG_NUMS	     = 256
-			CFG_NIOS_CPU_MUL	     = 0
-			CFG_NIOS_CPU_MSTEP	     = 1
-			CFG_NIOS_CPU_DBG_CORE	     = 0
+	U-Boot CFG:	CONFIG_SYS_NIOS_CPU_CLK	     = 50000000
+			CONFIG_SYS_NIOS_CPU_ICACHE	     = 4096
+			CONFIG_SYS_NIOS_CPU_DCACHE	     = 4096
+			CONFIG_SYS_NIOS_CPU_REG_NUMS	     = 256
+			CONFIG_SYS_NIOS_CPU_MUL	     = 0
+			CONFIG_SYS_NIOS_CPU_MSTEP	     = 1
+			CONFIG_SYS_NIOS_CPU_DBG_CORE	     = 0
 
 OCI:	(TODO)
 
 IRQ:	 Nr.  | used by
 	------+--------------------------------------------------------
-	 16   | TIMER0	  |  CFG_NIOS_CPU_TIMER0_IRQ = 16
-	 25   | UART0	  |  CFG_NIOS_CPU_UART0_IRQ  = 25
-	 30   | LAN91C111 |  CFG_NIOS_CPU_LAN0_IRQ   = 30
-	 35   | PIO5	  |  CFG_NIOS_CPU_PIO5_IRQ   = 35
-	 40   | PIO0	  |  CFG_NIOS_CPU_PIO0_IRQ   = 40
-	 50   | TIMER1	  |  CFG_NIOS_CPU_TIMER1_IRQ = 50
+	 16   | TIMER0	  |  CONFIG_SYS_NIOS_CPU_TIMER0_IRQ = 16
+	 25   | UART0	  |  CONFIG_SYS_NIOS_CPU_UART0_IRQ  = 25
+	 30   | LAN91C111 |  CONFIG_SYS_NIOS_CPU_LAN0_IRQ   = 30
+	 35   | PIO5	  |  CONFIG_SYS_NIOS_CPU_PIO5_IRQ   = 35
+	 40   | PIO0	  |  CONFIG_SYS_NIOS_CPU_PIO0_IRQ   = 40
+	 50   | TIMER1	  |  CONFIG_SYS_NIOS_CPU_TIMER1_IRQ = 50
 
 MEMORY:	 8 MByte Flash
 	 1 MByte SRAM
@@ -45,8 +45,8 @@ MEMORY:	 8 MByte Flash
 Timer:	TIMER0: high priority programmable timer (IRQ16)
 	TIMER1: low priority fixed timer for 10 ms @ 50 MHz (IRQ50)
 
-	U-Boot CFG:	CFG_NIOS_CPU_TICK_TIMER	     = 1
-			CFG_NIOS_CPU_USER_TIMER	     = 0
+	U-Boot CFG:	CONFIG_SYS_NIOS_CPU_TICK_TIMER	     = 1
+			CONFIG_SYS_NIOS_CPU_USER_TIMER	     = 0
 
 PIO:	 Nr.  | description
 	------+--------------------------------------------------------
@@ -59,14 +59,14 @@ PIO:	 Nr.  | description
 	 PIO6 | CFPOWER:    1 output to controll CF power supply
 	 PIO7 | CFATASEL:   1 output to controll CF ATA card select
 
-	U-Boot CFG:	CFG_NIOS_CPU_BUTTON_PIO	     = 0
-			CFG_NIOS_CPU_LCD_PIO	     = 1
-			CFG_NIOS_CPU_LED_PIO	     = 2
-			CFG_NIOS_CPU_SEVENSEG_PIO    = 3
-			CFG_NIOS_CPU_RECONF_PIO	     = 4
-			CFG_NIOS_CPU_CFPRESENT_PIO   = 5
-			CFG_NIOS_CPU_CFPOWER_PIO     = 6
-			CFG_NIOS_CPU_CFATASEL_PIO    = 7
+	U-Boot CFG:	CONFIG_SYS_NIOS_CPU_BUTTON_PIO	     = 0
+			CONFIG_SYS_NIOS_CPU_LCD_PIO	     = 1
+			CONFIG_SYS_NIOS_CPU_LED_PIO	     = 2
+			CONFIG_SYS_NIOS_CPU_SEVENSEG_PIO    = 3
+			CONFIG_SYS_NIOS_CPU_RECONF_PIO	     = 4
+			CONFIG_SYS_NIOS_CPU_CFPRESENT_PIO   = 5
+			CONFIG_SYS_NIOS_CPU_CFPOWER_PIO     = 6
+			CONFIG_SYS_NIOS_CPU_CFATASEL_PIO    = 7
 
 UART:	UART0: fixed baudrate of 115200, fixed protocol 8N1,
 	       without handshake RTS/CTS (IRQ25)
@@ -87,10 +87,10 @@ IDE:	(TODO)
   0x02000000 ---32-----------16|15------------0-
 	       |	       :	       | \
 	       |	       :	       | |
-  SDRAM	       |	       :	       |  > CFG_NIOS_CPU_SRAM_SIZE
+  SDRAM	       |	       :	       |  > CONFIG_SYS_NIOS_CPU_SRAM_SIZE
 	       |	       :	       | |   = 0x01000000
 	       |	       :	       | /
-  0x01000000 ---32-----------16|15------------0-    CFG_NIOS_CPU_SRAM_BASE
+  0x01000000 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_SRAM_BASE
 	       |			       |
 	       :	      gap	       :
 	       :			       :
@@ -106,7 +106,7 @@ IDE:	(TODO)
   IDE i/f      :   and content :	       :  > 0x00000080
   [5]	       :   unknown)    :	       : |
 	       |	       |	       | /
-  0x00920a00 ---32-----------16|15------------0-    CFG_NIOS_CPU_IDE0
+  0x00920a00 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_IDE0
 	       |		     (unused)  | \
 	+ 0x1c |- - - - - - - - - - - - - - - -| |
 	       |		     (unused)  | |
@@ -122,7 +122,7 @@ IDE:	(TODO)
 	       |  control (1 bit)	 (rw)  | |
 	+ 0x04 |- - - - - - - - - - - - - - - -| |
 	       |  status (2 bit)	 (rw)  | /
-  0x009209e0 ---32-----------16|15------------0-    CFG_NIOS_CPU_TIMER1
+  0x009209e0 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_TIMER1
 	       |		     (unused)  | \
 	+ 0x0c |- - - - - - - - - - - - - - - -| |
   PIO7	       |		     (unused)  | |
@@ -130,7 +130,7 @@ IDE:	(TODO)
 	       |		     (unused)  | |
 	+ 0x04 |- - - - - - - - - - - - - - - -| |
 	       |  data (1 bit)		 (wo)  | /
-  0x009209d0 ---32-----------16|15------------0-    CFG_NIOS_CPU_PIO7
+  0x009209d0 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_PIO7
 	       |		     (unused)  | \
 	+ 0x0c |- - - - - - - - - - - - - - - -| |
   PIO6	       |		     (unused)  | |
@@ -138,7 +138,7 @@ IDE:	(TODO)
 	       |		     (unused)  | |
 	+ 0x04 |- - - - - - - - - - - - - - - -| |
 	       |  data (1 bit)		 (wo)  | /
-  0x009209c0 ---32-----------16|15------------0-    CFG_NIOS_CPU_PIO6
+  0x009209c0 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_PIO6
 	       |  edgecapture (1 bit)	 (rw)  | \
 	+ 0x0c |- - - - - - - - - - - - - - - -| |
   PIO5	       |  interruptmask (1 bit)	 (rw)  | |
@@ -146,7 +146,7 @@ IDE:	(TODO)
 	       |		     (unused)  | |
 	+ 0x04 |- - - - - - - - - - - - - - - -| |
 	       |  data (1 bit)		 (ro)  | /
-  0x009209b0 ---32-----------16|15------------0-    CFG_NIOS_CPU_PIO5
+  0x009209b0 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_PIO5
 	       |		     (unused)  | \
 	+ 0x0c |- - - - - - - - - - - - - - - -| |
   PIO4	       |		     (unused)  | |
@@ -154,7 +154,7 @@ IDE:	(TODO)
 	       |  direction (1 bit)	 (rw)  | |
 	+ 0x04 |- - - - - - - - - - - - - - - -| |
 	       |  data (1 bit)		 (rw)  | /
-  0x009209a0 ---32-----------16|15------------0-    CFG_NIOS_CPU_PIO4
+  0x009209a0 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_PIO4
 	       |		     (unused)  | \
 	+ 0x0c |- - - - - - - - - - - - - - - -| |
   PIO3	       |		     (unused)  | |
@@ -162,7 +162,7 @@ IDE:	(TODO)
 	       |		     (unused)  | |
 	+ 0x04 |- - - - - - - - - - - - - - - -| |
 	       |  data (16 bit)		 (wo)  | /
-  0x00920990 ---32-----------16|15------------0-    CFG_NIOS_CPU_PIO3
+  0x00920990 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_PIO3
 	       |		     (unused)  | \
 	+ 0x0c |- - - - - - - - - - - - - - - -| |
   PIO2	       |		     (unused)  | |
@@ -170,7 +170,7 @@ IDE:	(TODO)
 	       |		     (unused)  | |
 	+ 0x04 |- - - - - - - - - - - - - - - -| |
 	       |  data (8 bit)		 (wo)  | /
-  0x00920980 ---32-----------16|15------------0-    CFG_NIOS_CPU_PIO2
+  0x00920980 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_PIO2
 	       |		     (unused)  | \
 	+ 0x0c |- - - - - - - - - - - - - - - -| |
   PIO1	       |		     (unused)  | |
@@ -178,7 +178,7 @@ IDE:	(TODO)
 	       |  direction (11 bit)	 (rw)  | |
 	+ 0x04 |- - - - - - - - - - - - - - - -| |
 	       |  data (11 bit)		 (rw)  | /
-  0x00920970 ---32-----------16|15------------0-    CFG_NIOS_CPU_PIO1
+  0x00920970 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_PIO1
 	       |  edgecapture (4 bit)	 (rw)  | \
 	+ 0x0c |- - - - - - - - - - - - - - - -| |
   PIO0	       |  interruptmask (4 bit)	 (rw)  | |
@@ -186,7 +186,7 @@ IDE:	(TODO)
 	       |		     (unused)  | |
 	+ 0x04 |- - - - - - - - - - - - - - - -| |
 	       |  data (4 bit)		 (ro)  | /
-  0x00920960 ---32-----------16|15------------0-    CFG_NIOS_CPU_PIO0
+  0x00920960 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_PIO0
 	       |		     (unused)  | \
 	+ 0x1c |- - - - - - - - - - - - - - - -| |
 	       |		     (unused)  | |
@@ -202,7 +202,7 @@ IDE:	(TODO)
 	       |  control (4 bit)	 (rw)  | |
 	+ 0x04 |- - - - - - - - - - - - - - - -| |
 	       |  status (2 bit)	 (rw)  | /
-  0x00920940 ---32-----------16|15------------0-    CFG_NIOS_CPU_TIMER0
+  0x00920940 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_TIMER0
 	       |			       | \
 	       :	      gap	       :  > (space for UART1)
 	       |			       | /
@@ -222,28 +222,28 @@ IDE:	(TODO)
 	       |  txdata (8 bit)	 (wo)  | |
 	+ 0x04 |- - - - - - - - - - - - - - - -| |
 	       |  rxdata (8 bit)	 (ro)  | /
-  0x00920900 ---32-----------16|15------------0-    CFG_NIOS_CPU_UART0
+  0x00920900 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_UART0
 
 - - - - - - - - - - -  on chip debugging  - - - - - - - - - - - - - - - - - - -
 
   0x00920900 -----------------------------------
 	       |			       | \
 	       :  (real size		       : |
-  OCI Debug    :   and content		       :  > CFG_NIOS_CPU_OCI_SIZE
+  OCI Debug    :   and content		       :  > CONFIG_SYS_NIOS_CPU_OCI_SIZE
 	       :   unknown)		       : |   = 0x00000100
 	       |			       | /
-  0x00920800 -----------------------------------    CFG_NIOS_CPU_OCI_BASE
+  0x00920800 -----------------------------------    CONFIG_SYS_NIOS_CPU_OCI_BASE
 
 - - - - - - - - - - -  on chip memory 2	  - - - - - - - - - - -
 
   0x00920800 ---32-----------16|15------------0-
 	       |	       :	       | \
 	       |	       :	       | |
-  GERMS	       |	       :	       |  > CFG_NIOS_CPU_ROM_SIZE
+  GERMS	       |	       :	       |  > CONFIG_SYS_NIOS_CPU_ROM_SIZE
 	       |	       :	       | |   = 0x00000800
 	       |	       :	       | /
-  0x00920000   |- - - - - - - - - - - - - - - -+- - CFG_NIOS_CPU_RST_VECT
-  0x00920000 ---32-----------16|15------------0-    CFG_NIOS_CPU_ROM_BASE
+  0x00920000   |- - - - - - - - - - - - - - - -+- - CONFIG_SYS_NIOS_CPU_RST_VECT
+  0x00920000 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_ROM_BASE
 
 - - - - - - - - - - -	 external i/o	  - - - - - - - - - - - - - - - - - - -
 
@@ -265,17 +265,17 @@ IDE:	(TODO)
 	       | +---------------------------+ | |
   0x00910300 --+--LAN91C111_REGISTERS_OFFSET---| |
 	       |	      gap	       | /
-  0x00910000 ---32-----------16|15------------0-    CFG_NIOS_CPU_LAN0_BASE
+  0x00910000 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_LAN0_BASE
 
 - - - - - - - - - - -  on chip memory 1	  - - - - - - - - - - -
 
   0x00910000 ---32-----------16|15------------0-
 	       |	       :	       | \
 	       |	       :	       | |
-  onchip RAM   |	       :	       |  > CFG_NIOS_CPU_RAM_SIZE
+  onchip RAM   |	       :	       |  > CONFIG_SYS_NIOS_CPU_RAM_SIZE
 	       |	       :	       | |   = 0x00010000
 	       |	       :	       | /
-  0x00900000 ---32-----------16|15------------0-    CFG_NIOS_CPU_RAM_BASE
+  0x00900000 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_RAM_BASE
 
 - - - - - - - - - - -  external memory 1  - - - - - - - - - - - - - - - - - - -
 
@@ -283,30 +283,30 @@ IDE:	(TODO)
   0x00900000 --+32-----------16|15------------0+
 	       |	       .	       | \ \
 	       |	       .	       | | |
-	       |	       .	       | |  > CFG_NIOS_CPU_VEC_SIZE
+	       |	       .	       | |  > CONFIG_SYS_NIOS_CPU_VEC_SIZE
 	       |	       .	       | | |   = 0x00000100
 	       |	       .	       | | /
-  0x008fff00   |- - - - - - - - - - - - - - - -+-|- CFG_NIOS_CPU_VEC_BASE
-  0x008fff00   |- - - - - - - - - - - - - - - -+-|- CFG_NIOS_CPU_STACK
+  0x008fff00   |- - - - - - - - - - - - - - - -+-|- CONFIG_SYS_NIOS_CPU_VEC_BASE
+  0x008fff00   |- - - - - - - - - - - - - - - -+-|- CONFIG_SYS_NIOS_CPU_STACK
 	       |	       .	       | | \
 	       |	       .	       | | |
 	       |	       .	       | |  > stack area
 	       |	       .	       | | |
 	       |	       .	       | | V
 	       |	       .	       | |
-  SRAM	       |	       .	       |  > CFG_NIOS_CPU_SRAM_SIZE
+  SRAM	       |	       .	       |  > CONFIG_SYS_NIOS_CPU_SRAM_SIZE
 	       |	       .	       | |   = 0x00100000
 	       |			       | /
-  0x00800000 ---32-----------16|15------------0-    CFG_NIOS_CPU_SRAM_BASE
+  0x00800000 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_SRAM_BASE
   0x00800000 ---8-------------4|3-------------0-
 	       |  sector 127		       | \
     + 0x7f0000 |- - - - - - - - - - - - - - - -| |
 	       |	       :	       | |
-  Flash	       |-   -	-   -  :  -   -	  -   -|  > CFG_NIOS_CPU_FLASH_SIZE
+  Flash	       |-   -	-   -  :  -   -	  -   -|  > CONFIG_SYS_NIOS_CPU_FLASH_SIZE
 	       |  sector 1     :	       | |   = 0x00800000
     + 0x010000 |- - - - - - - - - - - - - - - -| |
 	       |  sector 0 (size = 0x10000)    | /
-  0x00000000 ---8-------------4|3-------------0-    CFG_NIOS_CPU_FLASH_BASE
+  0x00000000 ---8-------------4|3-------------0-    CONFIG_SYS_NIOS_CPU_FLASH_BASE
 
 
 ===============================================================================
diff --git a/doc/README.dk20k200_std32 b/doc/README.dk20k200_std32
index 7b5d4d481..fc2d2a387 100644
--- a/doc/README.dk20k200_std32
+++ b/doc/README.dk20k200_std32
@@ -15,20 +15,20 @@ CPU:	"standard_32"
 	no Debug Core
 	no On Chip Instrumentation (OCI) enabled
 
-	U-Boot CFG:	CFG_NIOS_CPU_CLK	     = 50000000
-			CFG_NIOS_CPU_ICACHE	     = 0
-			CFG_NIOS_CPU_DCACHE	     = 0
-			CFG_NIOS_CPU_REG_NUMS	     = 256
-			CFG_NIOS_CPU_MUL	     = 0
-			CFG_NIOS_CPU_MSTEP	     = 1
-			CFG_NIOS_CPU_DBG_CORE	     = 0
+	U-Boot CFG:	CONFIG_SYS_NIOS_CPU_CLK	     = 50000000
+			CONFIG_SYS_NIOS_CPU_ICACHE	     = 0
+			CONFIG_SYS_NIOS_CPU_DCACHE	     = 0
+			CONFIG_SYS_NIOS_CPU_REG_NUMS	     = 256
+			CONFIG_SYS_NIOS_CPU_MUL	     = 0
+			CONFIG_SYS_NIOS_CPU_MSTEP	     = 1
+			CONFIG_SYS_NIOS_CPU_DBG_CORE	     = 0
 
 IRQ:	 Nr.  | used by
 	------+--------------------------------------------------------
-	 25   | TIMER0	  |  CFG_NIOS_CPU_TIMER0_IRQ = 25
-	 26   | UART0	  |  CFG_NIOS_CPU_UART0_IRQ  = 26
-	 27   | PIO2	  |  CFG_NIOS_CPU_PIO2_IRQ   = 27
-	 28   | UART1	  |  CFG_NIOS_CPU_UART1_IRQ  = 28    (debug)
+	 25   | TIMER0	  |  CONFIG_SYS_NIOS_CPU_TIMER0_IRQ = 25
+	 26   | UART0	  |  CONFIG_SYS_NIOS_CPU_UART0_IRQ  = 26
+	 27   | PIO2	  |  CONFIG_SYS_NIOS_CPU_PIO2_IRQ   = 27
+	 28   | UART1	  |  CONFIG_SYS_NIOS_CPU_UART1_IRQ  = 28    (debug)
 
 MEMORY:	  1 MByte Flash
 	256 KByte SRAM
@@ -36,7 +36,7 @@ MEMORY:	  1 MByte Flash
 
 Timer:	TIMER0: high priority programmable timer (IRQ25)
 
-	U-Boot CFG:	CFG_NIOS_CPU_TICK_TIMER	     = 0
+	U-Boot CFG:	CONFIG_SYS_NIOS_CPU_TICK_TIMER	     = 0
 
 PIO:	 Nr.  | description
 	------+--------------------------------------------------------
@@ -45,10 +45,10 @@ PIO:	 Nr.  | description
 	 PIO2 | BUTTON:	    4 inputs for user push buttons (IRQ27)
 	 PIO3 | LCD:	   11 in/outputs for ASCII LCD
 
-	U-Boot CFG:	CFG_NIOS_CPU_SEVENSEG_PIO    = 0
-			CFG_NIOS_CPU_LED_PIO	     = 1
-			CFG_NIOS_CPU_BUTTON_PIO	     = 2
-			CFG_NIOS_CPU_LCD_PIO	     = 3
+	U-Boot CFG:	CONFIG_SYS_NIOS_CPU_SEVENSEG_PIO    = 0
+			CONFIG_SYS_NIOS_CPU_LED_PIO	     = 1
+			CONFIG_SYS_NIOS_CPU_BUTTON_PIO	     = 2
+			CONFIG_SYS_NIOS_CPU_LCD_PIO	     = 3
 
 UART:	UART0: fixed baudrate of 115200, fixed protocol 8N2,
 	       without handshake RTS/CTS (IRQ26)
@@ -70,7 +70,7 @@ UART:	UART0: fixed baudrate of 115200, fixed protocol 8N2,
 	       |  sector 5     :	       | |
     + 0x020000 |-   -	-   -  -  -   -	  -   -| |
 	       |  sector 4 (size = 0x10000)    | |
-    + 0x010000 |- - - - - - - - - - - - - - - -|  > CFG_NIOS_CPU_FLASH_SIZE
+    + 0x010000 |- - - - - - - - - - - - - - - -|  > CONFIG_SYS_NIOS_CPU_FLASH_SIZE
 	       |  sector 3 (size = 0x08000)    | |   = 0x00100000
     + 0x008000 |- - - - - - - - - - - - - - - -| |
 	       |  sector 2 (size = 0x02000)    | |
@@ -78,7 +78,7 @@ UART:	UART0: fixed baudrate of 115200, fixed protocol 8N2,
 	       |  sector 1 (size = 0x02000)    | |
     + 0x004000 |- - - - - - - - - - - - - - - -| |
 	       |  sector 0 (size = 0x04000)    | /
-  0x00100000 ---15------------8|7-------------0-    CFG_NIOS_CPU_FLASH_BASE
+  0x00100000 ---15------------8|7-------------0-    CONFIG_SYS_NIOS_CPU_FLASH_BASE
 	       |			       |
 	       :	      gap	       :
 	       |			       |
@@ -86,21 +86,21 @@ UART:	UART0: fixed baudrate of 115200, fixed protocol 8N2,
   0x00080000 --+32-----------16|15------------0+
 	       |	       .	       | \ \
 	       |	       .	       | | |
-	       |	       .	       | |  > CFG_NIOS_CPU_VEC_SIZE
+	       |	       .	       | |  > CONFIG_SYS_NIOS_CPU_VEC_SIZE
 	       |	       .	       | | |   = 0x00000100
 	       |	       .	       | | /
-  0x0007ff00   |- - - - - - - - - - - - - - - -+-|- CFG_NIOS_CPU_VEC_BASE
-  0x0007ff00   |- - - - - - - - - - - - - - - -+-|- CFG_NIOS_CPU_STACK
+  0x0007ff00   |- - - - - - - - - - - - - - - -+-|- CONFIG_SYS_NIOS_CPU_VEC_BASE
+  0x0007ff00   |- - - - - - - - - - - - - - - -+-|- CONFIG_SYS_NIOS_CPU_STACK
 	       |	       .	       | | \
 	       |	       .	       | | |
 	       |	       .	       | |  > stack area
 	       |	       .	       | | |
 	       |	       .	       | | V
 	       |	       .	       | |
-  SRAM	       |	       .	       |  > CFG_NIOS_CPU_SRAM_SIZE
+  SRAM	       |	       .	       |  > CONFIG_SYS_NIOS_CPU_SRAM_SIZE
 	       |	       .	       | |   = 0x00040000
 	       |			       | /
-  0x00040000 ---32-----------16|15------------0-    CFG_NIOS_CPU_SRAM_BASE
+  0x00040000 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_SRAM_BASE
 	       |			       |
 	       :	      gap	       :
 	       :			       :
@@ -126,7 +126,7 @@ UART:	UART0: fixed baudrate of 115200, fixed protocol 8N2,
 	       |  txdata (8 bit)	 (wo)  | |
 	+ 0x04 |- - - - - - - - - - - - - - - -| |
 	       |  rxdata (8 bit)	 (ro)  | /
-  0x000004c0 ---32-----------16|15------------0-    CFG_NIOS_CPU_UART1
+  0x000004c0 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_UART1
 	       |			       |
 	       :	      gap	       :
 	       |			       |
@@ -138,7 +138,7 @@ UART:	UART0: fixed baudrate of 115200, fixed protocol 8N2,
 	       |  direction (11 bit)	 (rw)  | |
 	+ 0x04 |- - - - - - - - - - - - - - - -| |
 	       |  data (11 bit)		 (rw)  | /
-  0x00000480 ---32-----------16|15------------0-    CFG_NIOS_CPU_PIO3
+  0x00000480 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_PIO3
 	       |  edgecapture (12 bit)	 (rw)  | \
 	+ 0x0c |- - - - - - - - - - - - - - - -| |
   PIO2	       |  interruptmask (12 bit) (rw)  | |
@@ -146,7 +146,7 @@ UART:	UART0: fixed baudrate of 115200, fixed protocol 8N2,
 	       |		     (unused)  | |
 	+ 0x04 |- - - - - - - - - - - - - - - -| |
 	       |  data (12 bit)		 (ro)  | /
-  0x00000470 ---32-----------16|15------------0-    CFG_NIOS_CPU_PIO2
+  0x00000470 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_PIO2
 	       |		     (unused)  | \
 	+ 0x0c |- - - - - - - - - - - - - - - -| |
   PIO1	       |		     (unused)  | |
@@ -154,7 +154,7 @@ UART:	UART0: fixed baudrate of 115200, fixed protocol 8N2,
 	       |  direction (2 bit)	 (rw)  | |
 	+ 0x04 |- - - - - - - - - - - - - - - -| |
 	       |  data (2 bit)		 (rw)  | /
-  0x00000460 ---32-----------16|15------------0-    CFG_NIOS_CPU_PIO1
+  0x00000460 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_PIO1
 	       |		     (unused)  | \
 	+ 0x1c |- - - - - - - - - - - - - - - -| |
 	       |		     (unused)  | |
@@ -170,7 +170,7 @@ UART:	UART0: fixed baudrate of 115200, fixed protocol 8N2,
 	       |  control (4 bit)	 (rw)  | |
 	+ 0x04 |- - - - - - - - - - - - - - - -| |
 	       |  status (2 bit)	 (rw)  | /
-  0x00000440 ---32-----------16|15------------0-    CFG_NIOS_CPU_TIMER0
+  0x00000440 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_TIMER0
 	       |		     (unused)  | \
 	+ 0x0c |- - - - - - - - - - - - - - - -| |
   PIO0	       |		     (unused)  | |
@@ -178,7 +178,7 @@ UART:	UART0: fixed baudrate of 115200, fixed protocol 8N2,
 	       |		     (unused)  | |
 	+ 0x04 |- - - - - - - - - - - - - - - -| |
 	       |  data (16 bit)		 (wo)  | /
-  0x00000420 ---32-----------16|15------------0-    CFG_NIOS_CPU_PIO0
+  0x00000420 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_PIO0
 	       |		     (unused)  | \
 	+ 0x1c |- - - - - - - - - - - - - - - -| |
 	       |		     (unused)  | |
@@ -194,7 +194,7 @@ UART:	UART0: fixed baudrate of 115200, fixed protocol 8N2,
 	       |  txdata (8 bit)	 (wo)  | |
 	+ 0x04 |- - - - - - - - - - - - - - - -| |
 	       |  rxdata (8 bit)	 (ro)  | /
-  0x00000400 ---32-----------16|15------------0-    CFG_NIOS_CPU_UART0
+  0x00000400 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_UART0
 
 - - - - - - - - - - -	on chip memory	  - - - - - - - - - - -
 
diff --git a/doc/README.ebony b/doc/README.ebony
index 8b030dbb5..a395a4996 100644
--- a/doc/README.ebony
+++ b/doc/README.ebony
@@ -35,7 +35,7 @@ I2C iprobe
 =====================
 
 The i2c utilities have been tested on both Rev B. and Rev C. and
-look good. The CFG_I2C_NOPROBES macro is defined to prevent
+look good. The CONFIG_SYS_I2C_NOPROBES macro is defined to prevent
 probing the CDCV850 clock controller at address 0x69 (since reading
 it causes the i2c implementation to misbehave. The output of
 iprobe should look like this (assuming you are only using a single
diff --git a/doc/README.fsl-ddr b/doc/README.fsl-ddr
new file mode 100644
index 000000000..9c2224fea
--- /dev/null
+++ b/doc/README.fsl-ddr
@@ -0,0 +1,69 @@
+
+Table of interleaving modes supported in cpu/8xxx/ddr/
+======================================================
+  +-------------+---------------------------------------------------------+
+  |             |                   Rank Interleaving                     |
+  |             +--------+-----------+-----------+------------+-----------+
+  |Memory       |        |           |           |    2x2     |    4x1    |
+  |Controller   |  None  | 2x1 lower | 2x1 upper | {CS0+CS1}, | {CS0+CS1+ |
+  |Interleaving |        | {CS0+CS1} | {CS2+CS3} | {CS2+CS3}  |  CS2+CS3} |
+  +-------------+--------+-----------+-----------+------------+-----------+
+  |None         |  Yes   | Yes       | Yes       | Yes        | Yes       |
+  +-------------+--------+-----------+-----------+------------+-----------+
+  |Cacheline    |  Yes   | Yes       | No        | No, Only(*)| Yes       |
+  |             |CS0 Only|           |           | {CS0+CS1}  |           |
+  +-------------+--------+-----------+-----------+------------+-----------+
+  |Page         |  Yes   | Yes       | No        | No, Only(*)| Yes       |
+  |             |CS0 Only|           |           | {CS0+CS1}  |           |
+  +-------------+--------+-----------+-----------+------------+-----------+
+  |Bank         |  Yes   | Yes       | No        | No, Only(*)| Yes       |
+  |             |CS0 Only|           |           | {CS0+CS1}  |           |
+  +-------------+--------+-----------+-----------+------------+-----------+
+  |Superbank    |  No    | Yes       | No        | No, Only(*)| Yes       |
+  |             |        |           |           | {CS0+CS1}  |           |
+  +-------------+--------+-----------+-----------+------------+-----------+
+ (*) Although the hardware can be configured with memory controller
+ interleaving using "2x2" rank interleaving, it only interleaves {CS0+CS1}
+ from each controller. {CS2+CS3} on each controller are only rank
+ interleaved on that controller.
+
+The ways to configure the ddr interleaving mode
+==============================================
+1. In board header file(e.g.MPC8572DS.h), add default interleaving setting
+   under "CONFIG_EXTRA_ENV_SETTINGS", like:
+	#define CONFIG_EXTRA_ENV_SETTINGS				\
+	 "memctl_intlv_ctl=2\0"						\
+	 ......
+
+2. Run u-boot "setenv" command to configure the memory interleaving mode.
+   Either numerical or string value is accepted.
+
+  # disable memory controller interleaving
+  setenv memctl_intlv_ctl
+
+  # cacheline interleaving
+  setenv memctl_intlv_ctl 0 or setenv memctl_intlv_ctl cacheline
+
+  # page interleaving
+  setenv memctl_intlv_ctl 1 or setenv memctl_intlv_ctl page
+
+  # bank interleaving
+  setenv memctl_intlv_ctl 2 or setenv memctl_intlv_ctl bank
+
+  # superbank
+  setenv memctl_intlv_ctl 3 or setenv memctl_intlv_ctl superbank
+
+  # disable bank (chip-select) interleaving
+  setenv ba_intlv_ctl
+
+  # bank(chip-select) interleaving cs0+cs1
+  setenv ba_intlv_ctl 0x40 or setenv ba_intlv_ctl cs0_cs1
+
+  # bank(chip-select) interleaving cs2+cs3
+  setenv ba_intlv_ctl 0x20 or setenv ba_intlv_ctl cs2_cs3
+
+  # bank(chip-select) interleaving (cs0+cs1) and (cs2+cs3)  (2x2)
+  setenv ba_intlv_ctl 0x60 or setenv ba_intlv_ctl cs0_cs1_and_cs2_cs3
+
+  # bank(chip-select) interleaving (cs0+cs1+cs2+cs3) (4x1)
+  setenv ba_intlv_ctl 0x04 or setenv ba_intlv_ctl cs0_cs1_cs2_cs3
diff --git a/doc/README.generic_usb_ohci b/doc/README.generic_usb_ohci
index 147ea514a..ba7cea83c 100644
--- a/doc/README.generic_usb_ohci
+++ b/doc/README.generic_usb_ohci
@@ -11,24 +11,24 @@ Configuration options
 
 	CONFIG_USB_OHCI_NEW: enable the new OHCI driver
 
-	CFG_USB_OHCI_BOARD_INIT: call the board dependant hooks:
+	CONFIG_SYS_USB_OHCI_BOARD_INIT: call the board dependant hooks:
 
 		  - extern int usb_board_init(void);
 		  - extern int usb_board_stop(void);
 		  - extern int usb_cpu_init_fail(void);
 
-	CFG_USB_OHCI_CPU_INIT: call the cpu dependant hooks:
+	CONFIG_SYS_USB_OHCI_CPU_INIT: call the cpu dependant hooks:
 
 		  - extern int usb_cpu_init(void);
 		  - extern int usb_cpu_stop(void);
 		  - extern int usb_cpu_init_fail(void);
 
-	CFG_USB_OHCI_REGS_BASE: defines the base address of the OHCI
+	CONFIG_SYS_USB_OHCI_REGS_BASE: defines the base address of the OHCI
 				registers
 
-	CFG_USB_OHCI_SLOT_NAME: slot name
+	CONFIG_SYS_USB_OHCI_SLOT_NAME: slot name
 
-	CFG_USB_OHCI_MAX_ROOT_PORTS: maximal number of ports of the
+	CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS: maximal number of ports of the
 				     root hub.
 
 
@@ -39,7 +39,7 @@ The USB bus operates in little endian, but unfortunately there are
 OHCI controllers that operate in big endian such as ppc4xx and
 mpc5xxx. For these the config option
 
-	CFG_OHCI_BE_CONTROLLER
+	CONFIG_SYS_OHCI_BE_CONTROLLER
 
 needs to be defined.
 
@@ -60,4 +60,4 @@ If undefined, the first instance found in PCI space will be used.
 PCI Controllers need to do byte swapping on register accesses, so they
 should to define:
 
-	CFG_OHCI_SWAP_REG_ACCESS
+	CONFIG_SYS_OHCI_SWAP_REG_ACCESS
diff --git a/doc/README.imx31 b/doc/README.imx31
new file mode 100644
index 000000000..91ef76688
--- /dev/null
+++ b/doc/README.imx31
@@ -0,0 +1,29 @@
+U-Boot for Freescale i.MX31
+
+This file contains information for the port of U-Boot to the Freescale
+i.MX31 SoC.
+
+1. CONFIGURATION OPTIONS/SETTINGS
+---------------------------------
+
+1.1 Configuration of MC13783 SPI bus
+------------------------------------
+	The power management companion chip MC13783 is connected to the
+	i.MX31 via an SPI bus. Use the following configuration options
+	to setup the bus and chip select used for a particular board.
+
+	CONFIG_MC13783_SPI_BUS	-- defines the SPI bus the MC13783 is connected to.
+			   Note that 0 is CSPI1, 1 is CSPI2 and 2 is CSPI3.
+	CONFIG_MC13783_SPI_CS	-- define the chip select the MC13783 s connected to.
+
+1.2 Timer precision
+-------------------
+	CONFIG_MX31_TIMER_HIGH_PRECISION
+
+	Enable higher precision timer. The low-precision timer
+	(default) provides approximately 4% error, whereas the
+	high-precision timer is about 0.4% accurate. The extra
+	accuracy is achieved at the cost of higher computational
+	overhead, which, in places where time is measured, should
+	not be critical, so, it should be safe to enable this
+	option.
diff --git a/doc/README.iomux b/doc/README.iomux
new file mode 100644
index 000000000..5b82a8667
--- /dev/null
+++ b/doc/README.iomux
@@ -0,0 +1,106 @@
+/*
+ * (C) Copyright 2008
+ * Gary Jennejohn, DENX Software Engineering GmbH <garyj@denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+U-Boot console multiplexing
+===========================
+
+HOW CONSOLE MULTIPLEXING WORKS
+------------------------------
+
+This functionality is controlled with CONFIG_CONSOLE_MUX in the board
+configuration file.
+
+Two new files, common/iomux.c and include/iomux.h, contain the heart
+(iomux_doenv()) of the environment setting implementation.
+
+iomux_doenv() is called in common/cmd_nvedit.c to handle setenv and in
+common/console.c in console_init_r() during bootup to initialize
+stdio_devices[].
+
+A user can use a comma-separated list of devices to set stdin, stdout
+and stderr.  For example: "setenv stdin serial,nc".  NOTE: No spaces
+are allowed around the comma(s)!
+
+The length of the list is limited by malloc(), since the array used
+is allocated and freed dynamically.
+
+It should be possible to specify any device which console_assign()
+finds acceptable, but the code has only been tested with serial and
+nc.
+
+iomux_doenv() prevents multiple use of the same device, e.g. "setenv
+stdin nc,nc,serial" will discard the second nc.  iomux_doenv() is
+not able to modify the environment, however, so that "pri stdin" still
+shows "nc,nc,serial".
+
+The major change in common/console.c was to modify fgetc() to call
+the iomux_tstc() routine in a for-loop.  iomux_tstc() in turn calls
+the tstc() routine for every registered device, but exits immediately
+when one of them returns true.  fgetc() then calls iomux_getc(),
+which calls the corresponding getc() routine.  fgetc() hangs in
+the for-loop until iomux_tstc() returns true and the input can be
+retrieved.
+
+Thus, a user can type into any device registered for stdin.  No effort
+has been made to demulitplex simultaneous input from multiple stdin
+devices.
+
+fputc() and fputs() have been modified to call iomux_putc() and
+iomux_puts() respectively, which call the corresponding output
+routines for every registered device.
+
+Thus, a user can see the ouput for any device registered for stdout
+or stderr on all devices registered for stdout or stderr.  As an
+example, if stdin=serial,nc and stdout=serial,nc then all output
+for serial, e.g. echos of input on serial, will appear on serial and nc.
+
+Just as with the old console code, this statement is still true:
+If not defined in the environment, the first input device is assigned
+to the 'stdin' file, the first output one to 'stdout' and 'stderr'.
+
+If CONFIG_SYS_CONSOLE_IS_IN_ENV is defined then multiple input/output
+devices can be set at boot time if defined in the environment.
+
+CAVEATS
+-------
+
+Note that common/iomux.c calls console_assign() for every registered
+device as it is discovered.  This means that the environment settings
+for application consoles will be set to the last device in the list.
+
+On a slow machine, such as MPC852T clocked at 66MHz, the overhead associated
+with calling tstc() and then getc() means that copy&paste will normally not
+work, even when stdin=stdout=stderr=serial.
+On a faster machine, such as a sequoia, cut&paste of longer (about 80
+characters) lines works fine when serial is the only device used.
+
+Using nc as a stdin device results in even more overhead because nc_tstc()
+is quite slow.  Even on a sequoia cut&paste does not work on the serial
+interface when nc is added to stdin, although there is no character loss using
+the ethernet interface for input. In this test case stdin=serial,nc and
+stdout=serial.
+
+In addition, the overhead associated with sending to two devices, when one of
+them is nc, also causes problems.  Even on a sequoia cut&paste does not work
+on the serial interface (stdin=serial) when nc is added to stdout (stdout=
+serial,nc).
diff --git a/doc/README.lynxkdi b/doc/README.lynxkdi
index 8fdf49503..076f01862 100644
--- a/doc/README.lynxkdi
+++ b/doc/README.lynxkdi
@@ -39,9 +39,9 @@ modifications to the config file.
 
 Edit include/configs/MPC8260ADS.h to use the following:
 
-#define CFG_IMMR	0xFA200000
-#define CFG_BCSR	0xFA100000
-#define CFG_BR1_PRELIM	0xFA101801
+#define CONFIG_SYS_IMMR	0xFA200000
+#define CONFIG_SYS_BCSR	0xFA100000
+#define CONFIG_SYS_BR1_PRELIM	0xFA101801
 
 When creating a LynxOS or BlueCat u-boot image using mkimage,
 you must specify the following:
diff --git a/doc/README.m52277evb b/doc/README.m52277evb
index de1dabade..e00294799 100644
--- a/doc/README.m52277evb
+++ b/doc/README.m52277evb
@@ -70,12 +70,12 @@ CONFIG_M52277		-- define for all Freescale MCF52277 CPUs
 CONFIG_M52277EVB	-- define for M52277EVB board
 
 CONFIG_MCFUART		-- define to use common CF Uart driver
-CFG_UART_PORT		-- define UART port number, start with 0, 1 and 2
+CONFIG_SYS_UART_PORT		-- define UART port number, start with 0, 1 and 2
 CONFIG_BAUDRATE		-- define UART baudrate
 
 CONFIG_MCFRTC		-- define to use common CF RTC driver
-CFG_MCFRTC_BASE		-- provide base address for RTC in immap.h
-CFG_RTC_OSCILLATOR	-- define RTC clock frequency
+CONFIG_SYS_MCFRTC_BASE		-- provide base address for RTC in immap.h
+CONFIG_SYS_RTC_OSCILLATOR	-- define RTC clock frequency
 RTC_DEBUG		-- define to show RTC debug message
 CONFIG_CMD_DATE		-- enable to use date feature in u-boot
 
@@ -85,22 +85,22 @@ CONFIG_MCFPIT		-- define to use PIT timer
 CONFIG_FSL_I2C		-- define to use FSL common I2C driver
 CONFIG_HARD_I2C		-- define for I2C hardware support
 CONFIG_SOFT_I2C		-- define for I2C bit-banged
-CFG_I2C_SPEED		-- define for I2C speed
-CFG_I2C_SLAVE		-- define for I2C slave address
-CFG_I2C_OFFSET		-- define for I2C base address offset
-CFG_IMMR		-- define for MBAR offset
+CONFIG_SYS_I2C_SPEED		-- define for I2C speed
+CONFIG_SYS_I2C_SLAVE		-- define for I2C slave address
+CONFIG_SYS_I2C_OFFSET		-- define for I2C base address offset
+CONFIG_SYS_IMMR		-- define for MBAR offset
 
-CFG_MBAR		-- define MBAR offset
+CONFIG_SYS_MBAR		-- define MBAR offset
 
 CONFIG_MONITOR_IS_IN_RAM -- Not support
 
-CFG_INIT_RAM_ADDR	-- defines the base address of the MCF52277 internal SRAM
+CONFIG_SYS_INIT_RAM_ADDR	-- defines the base address of the MCF52277 internal SRAM
 
-CFG_CSn_BASE	-- defines the Chip Select Base register
-CFG_CSn_MASK	-- defines the Chip Select Mask register
-CFG_CSn_CTRL	-- defines the Chip Select Control register
+CONFIG_SYS_CSn_BASE	-- defines the Chip Select Base register
+CONFIG_SYS_CSn_MASK	-- defines the Chip Select Mask register
+CONFIG_SYS_CSn_CTRL	-- defines the Chip Select Control register
 
-CFG_SDRAM_BASE	-- defines the DRAM Base
+CONFIG_SYS_SDRAM_BASE	-- defines the DRAM Base
 
 CONFIG_LCD and CONFIG_CMD_USB are not supported in this current u-boot,
 update will be provided at later time
diff --git a/doc/README.m5253evbe b/doc/README.m5253evbe
index 0426cb1d4..f51609f3e 100644
--- a/doc/README.m5253evbe
+++ b/doc/README.m5253evbe
@@ -28,9 +28,9 @@ Created 06/05/2007
 	CONFIG_MCF52x2		Processor family
 	CONFIG_MCF5253		MCF5253 specific
 	CONFIG_M5253EVBE	Amadeus Plus board specific
-	CFG_CLK			Define Amadeus Plus CPU Clock
-	CFG_MBAR		MBAR base address
-	CFG_MBAR2		MBAR2 base address
+	CONFIG_SYS_CLK			Define Amadeus Plus CPU Clock
+	CONFIG_SYS_MBAR		MBAR base address
+	CONFIG_SYS_MBAR2		MBAR2 base address
 
 3.2 Compilation
 	export CROSS_COMPILE=/usr/local/freescale-coldfire-4.1-elf/bin/m68k-elf-
diff --git a/doc/README.m53017evb b/doc/README.m53017evb
new file mode 100644
index 000000000..60cfa95af
--- /dev/null
+++ b/doc/README.m53017evb
@@ -0,0 +1,181 @@
+Freescale MCF53017EVB ColdFire Development Board
+================================================
+
+TsiChung Liew(Tsi-Chung.Liew@freescale.com)
+Created 10/22/08
+===========================================
+
+
+Changed files:
+==============
+
+- board/freescale/m53017evb/m53017evb.c	Dram setup
+- board/freescale/m53017evb/mii.c	Mii access
+- board/freescale/m53017evb/Makefile	Makefile
+- board/freescale/m53017evb/config.mk	config make
+- board/freescale/m53017evb/u-boot.lds	Linker description
+
+- cpu/mcf532x/cpu.c			cpu specific code
+- cpu/mcf532x/cpu_init.c		FBCS, Mux pins, icache and RTC extra regs
+- cpu/mcf532x/interrupts.c		cpu specific interrupt support
+- cpu/mcf532x/speed.c			system, flexbus, and cpu clock
+- cpu/mcf532x/Makefile			Makefile
+- cpu/mcf532x/config.mk			config make
+- cpu/mcf532x/start.S			start up assembly code
+
+- doc/README.m53017evb			This readme file
+
+- drivers/net/mcffec.c			ColdFire common FEC driver
+- drivers/net/mcfmii.c			ColdFire common Mii driver
+- drivers/serial/mcfuart.c		ColdFire common UART driver
+- drivers/rtc/mcfrtc.c			Realtime clock Driver
+
+- include/asm-m68k/bitops.h		Bit operation function export
+- include/asm-m68k/byteorder.h		Byte order functions
+- include/asm-m68k/fec.h		FEC structure and definition
+- include/asm-m68k/fsl_i2c.h		I2C structure and definition
+- include/asm-m68k/global_data.h	Global data structure
+- include/asm-m68k/immap.h		ColdFire specific header file and driver macros
+- include/asm-m68k/immap_5301x.h	mcf5301x specific header file
+- include/asm-m68k/io.h			io functions
+- include/asm-m68k/m532x.h		mcf5301x specific header file
+- include/asm-m68k/posix_types.h	Posix
+- include/asm-m68k/processor.h		header file
+- include/asm-m68k/ptrace.h		Exception structure
+- include/asm-m68k/rtc.h		Realtime clock header file
+- include/asm-m68k/string.h		String function export
+- include/asm-m68k/timer.h		Timer structure and definition
+- include/asm-m68k/types.h		Data types definition
+- include/asm-m68k/uart.h		Uart structure and definition
+- include/asm-m68k/u-boot.h		u-boot structure
+
+- include/configs/M53017EVB.h		Board specific configuration file
+
+- lib_m68k/board.c			board init function
+- lib_m68k/cache.c
+- lib_m68k/interrupts			Coldfire common interrupt functions
+- lib_m68k/m68k_linux.c
+- lib_m68k/time.c			Timer functions (Dma timer and PIT)
+- lib_m68k/traps.c			Exception init code
+
+1 MCF5301x specific Options/Settings
+====================================
+1.1 pre-loader is no longer suppoer in thie coldfire family
+
+1.2 Configuration settings for M53017EVB Development Board
+CONFIG_MCF5301x			-- define for all MCF5301x CPUs
+CONFIG_M53015			-- define for MCF53015 CPUs
+CONFIG_M53017EVB		-- define for M53017EVB board
+
+CONFIG_MCFUART			-- define to use common CF Uart driver
+CONFIG_SYS_UART_PORT		-- define UART port number, start with 0, 1 and 2
+CONFIG_BAUDRATE			-- define UART baudrate
+
+CONFIG_MCFRTC			-- define to use common CF RTC driver
+CONFIG_SYS_MCFRTC_BASE		-- provide base address for RTC in immap.h
+CONFIG_SYS_RTC_OSCILLATOR	-- define RTC clock frequency
+RTC_DEBUG			-- define to show RTC debug message
+CONFIG_CMD_DATE			-- enable to use date feature in u-boot
+
+CONFIG_MCFFEC			-- define to use common CF FEC driver
+CONFIG_NET_MULTI		-- define to use multi FEC in u-boot
+CONFIG_MII			-- enable to use MII driver
+CONFIG_CF_DOMII			-- enable to use MII feature in cmd_mii.c
+CONFIG_SYS_DISCOVER_PHY		-- enable PHY discovery
+CONFIG_SYS_RX_ETH_BUFFER	-- Set FEC Receive buffer
+CONFIG_SYS_FAULT_ECHO_LINK_DOWN	--
+CONFIG_SYS_FEC0_PINMUX		-- Set FEC0 Pin configuration
+CONFIG_SYS_FEC0_MIIBASE		-- Set FEC0 MII base register
+MCFFEC_TOUT_LOOP		-- set FEC timeout loop
+
+CONFIG_MCFTMR			-- define to use DMA timer
+CONFIG_MCFPIT			-- define to use PIT timer
+
+CONFIG_FSL_I2C			-- define to use FSL common I2C driver
+CONFIG_HARD_I2C			-- define for I2C hardware support
+CONFIG_SOFT_I2C			-- define for I2C bit-banged
+CONFIG_SYS_I2C_SPEED		-- define for I2C speed
+CONFIG_SYS_I2C_SLAVE		-- define for I2C slave address
+CONFIG_SYS_I2C_OFFSET		-- define for I2C base address offset
+CONFIG_SYS_IMMR			-- define for MBAR offset
+
+CONFIG_SYS_MBAR			-- define MBAR offset
+
+CONFIG_MONITOR_IS_IN_RAM 	-- Not support
+
+CONFIG_SYS_INIT_RAM_ADDR	-- defines the base address of the MCF5301x internal SRAM
+
+CONFIG_SYS_CSn_BASE		-- defines the Chip Select Base register
+CONFIG_SYS_CSn_MASK		-- defines the Chip Select Mask register
+CONFIG_SYS_CSn_CTRL		-- defines the Chip Select Control register
+
+CONFIG_SYS_SDRAM_BASE		-- defines the DRAM Base
+
+2. MEMORY MAP UNDER U-BOOT AND LINUX KERNEL
+===========================================
+2.1. System memory map:
+	Flash:		0x00000000-0x3FFFFFFF (1024MB)
+	DDR:		0x40000000-0x7FFFFFFF (1024MB)
+	SRAM:		0x80000000-0x8FFFFFFF (256MB)
+	IP:		0xFC000000-0xFFFFFFFF (256MB)
+
+2.2. For the initial bringup, we adopted a consistent memory scheme between u-boot and
+	linux kernel, you can customize it based on your system requirements:
+	Flash0:		0x00000000-0x00FFFFFF (16MB)
+	DDR:		0x40000000-0x4FFFFFFF (256MB)
+	SRAM:		0x80000000-0x80007FFF (32KB)
+	IP:		0xFC000000-0xFC0FFFFF (64KB)
+
+3. COMPILATION
+==============
+3.1	To create U-Boot the gcc-4.x-xx compiler set (ColdFire ELF or
+uClinux version) from codesourcery.com was used. Download it from:
+http://www.codesourcery.com/gnu_toolchains/coldfire/download.html
+
+3.2 Compilation
+   export CROSS_COMPILE=cross-compile-prefix
+   cd u-boot
+   make distclean
+   make M53017EVB_config
+   make
+
+4. SCREEN DUMP
+==============
+4.1 M53017EVB Development board
+    (NOTE: May not show exactly the same)
+
+U-Boot 2008.10 (Oct 22 2007 - 11:07:57)
+
+CPU:   Freescale MCF53015 (Mask:76 Version:0)
+       CPU CLK 240 Mhz BUS CLK 80 Mhz
+Board: Freescale M53017EVB
+I2C:   ready
+DRAM:  64 MB
+FLASH: 16 MB
+In:    serial
+Out:   serial
+Err:   serial
+NAND:  16 MiB
+Net:   FEC0, FEC1
+-> print
+bootdelay=1
+baudrate=115200
+ethaddr=00:e0:0c:bc:e5:60
+hostname=M53017EVB
+netdev=eth0
+loadaddr=40010000
+u-boot=u-boot.bin
+load=tftp ${loadaddr) ${u-boot}
+upd=run load; run prog
+prog=prot off 0 3ffff;era 0 3ffff;cp.b ${loadaddr} 0 ${filesize};save
+gatewayip=192.168.1.1
+netmask=255.255.255.0
+ipaddr=192.168.1.3
+serverip=192.168.1.2
+stdin=serial
+stdout=serial
+stderr=serial
+mem=65024k
+
+Environment size: 437/4092 bytes
+->
diff --git a/doc/README.m5373evb b/doc/README.m5373evb
index b2ef4a5f7..4781d9417 100644
--- a/doc/README.m5373evb
+++ b/doc/README.m5373evb
@@ -67,12 +67,12 @@ CONFIG_M5373		-- define for all Freescale MCF5373 CPUs
 CONFIG_M5373EVB		-- define for M5373EVB board
 
 CONFIG_MCFUART		-- define to use common CF Uart driver
-CFG_UART_PORT		-- define UART port number, start with 0, 1 and 2
+CONFIG_SYS_UART_PORT		-- define UART port number, start with 0, 1 and 2
 CONFIG_BAUDRATE		-- define UART baudrate
 
 CONFIG_MCFRTC		-- define to use common CF RTC driver
-CFG_MCFRTC_BASE		-- provide base address for RTC in immap.h
-CFG_RTC_OSCILLATOR	-- define RTC clock frequency
+CONFIG_SYS_MCFRTC_BASE		-- provide base address for RTC in immap.h
+CONFIG_SYS_RTC_OSCILLATOR	-- define RTC clock frequency
 RTC_DEBUG		-- define to show RTC debug message
 CONFIG_CMD_DATE		-- enable to use date feature in u-boot
 
@@ -80,11 +80,11 @@ CONFIG_MCFFEC		-- define to use common CF FEC driver
 CONFIG_NET_MULTI	-- define to use multi FEC in u-boot
 CONFIG_MII		-- enable to use MII driver
 CONFIG_CF_DOMII		-- enable to use MII feature in cmd_mii.c
-CFG_DISCOVER_PHY	-- enable PHY discovery
-CFG_RX_ETH_BUFFER	-- Set FEC Receive buffer
-CFG_FAULT_ECHO_LINK_DOWN--
-CFG_FEC0_PINMUX		-- Set FEC0 Pin configuration
-CFG_FEC0_MIIBASE	-- Set FEC0 MII base register
+CONFIG_SYS_DISCOVER_PHY	-- enable PHY discovery
+CONFIG_SYS_RX_ETH_BUFFER	-- Set FEC Receive buffer
+CONFIG_SYS_FAULT_ECHO_LINK_DOWN--
+CONFIG_SYS_FEC0_PINMUX		-- Set FEC0 Pin configuration
+CONFIG_SYS_FEC0_MIIBASE	-- Set FEC0 MII base register
 MCFFEC_TOUT_LOOP	-- set FEC timeout loop
 
 CONFIG_MCFTMR		-- define to use DMA timer
@@ -93,22 +93,22 @@ CONFIG_MCFPIT		-- define to use PIT timer
 CONFIG_FSL_I2C		-- define to use FSL common I2C driver
 CONFIG_HARD_I2C		-- define for I2C hardware support
 CONFIG_SOFT_I2C		-- define for I2C bit-banged
-CFG_I2C_SPEED		-- define for I2C speed
-CFG_I2C_SLAVE		-- define for I2C slave address
-CFG_I2C_OFFSET		-- define for I2C base address offset
-CFG_IMMR		-- define for MBAR offset
+CONFIG_SYS_I2C_SPEED		-- define for I2C speed
+CONFIG_SYS_I2C_SLAVE		-- define for I2C slave address
+CONFIG_SYS_I2C_OFFSET		-- define for I2C base address offset
+CONFIG_SYS_IMMR		-- define for MBAR offset
 
-CFG_MBAR		-- define MBAR offset
+CONFIG_SYS_MBAR		-- define MBAR offset
 
 CONFIG_MONITOR_IS_IN_RAM -- Not support
 
-CFG_INIT_RAM_ADDR	-- defines the base address of the MCF5373 internal SRAM
+CONFIG_SYS_INIT_RAM_ADDR	-- defines the base address of the MCF5373 internal SRAM
 
-CFG_CSn_BASE	-- defines the Chip Select Base register
-CFG_CSn_MASK	-- defines the Chip Select Mask register
-CFG_CSn_CTRL	-- defines the Chip Select Control register
+CONFIG_SYS_CSn_BASE	-- defines the Chip Select Base register
+CONFIG_SYS_CSn_MASK	-- defines the Chip Select Mask register
+CONFIG_SYS_CSn_CTRL	-- defines the Chip Select Control register
 
-CFG_SDRAM_BASE	-- defines the DRAM Base
+CONFIG_SYS_SDRAM_BASE	-- defines the DRAM Base
 
 2. MEMORY MAP UNDER U-BOOT AND LINUX KERNEL
 ===========================================
diff --git a/doc/README.m54455evb b/doc/README.m54455evb
index 5c01f0dff..f695da5f1 100644
--- a/doc/README.m54455evb
+++ b/doc/README.m54455evb
@@ -71,12 +71,12 @@ CONFIG_M54455		-- define for all Freescale MCF54455 CPUs
 CONFIG_M54455EVB	-- define for M54455EVB board
 
 CONFIG_MCFUART		-- define to use common CF Uart driver
-CFG_UART_PORT		-- define UART port number, start with 0, 1 and 2
+CONFIG_SYS_UART_PORT		-- define UART port number, start with 0, 1 and 2
 CONFIG_BAUDRATE		-- define UART baudrate
 
 CONFIG_MCFRTC		-- define to use common CF RTC driver
-CFG_MCFRTC_BASE		-- provide base address for RTC in immap.h
-CFG_RTC_OSCILLATOR	-- define RTC clock frequency
+CONFIG_SYS_MCFRTC_BASE		-- provide base address for RTC in immap.h
+CONFIG_SYS_RTC_OSCILLATOR	-- define RTC clock frequency
 RTC_DEBUG		-- define to show RTC debug message
 CONFIG_CMD_DATE		-- enable to use date feature in u-boot
 
@@ -84,13 +84,13 @@ CONFIG_MCFFEC		-- define to use common CF FEC driver
 CONFIG_NET_MULTI	-- define to use multi FEC in u-boot
 CONFIG_MII		-- enable to use MII driver
 CONFIG_CF_DOMII		-- enable to use MII feature in cmd_mii.c
-CFG_DISCOVER_PHY	-- enable PHY discovery
-CFG_RX_ETH_BUFFER	-- Set FEC Receive buffer
-CFG_FAULT_ECHO_LINK_DOWN--
-CFG_FEC0_PINMUX		-- Set FEC0 Pin configuration
-CFG_FEC1_PINMUX		-- Set FEC1 Pin configuration
-CFG_FEC0_MIIBASE	-- Set FEC0 MII base register
-CFG_FEC1_MIIBASE	-- Set FEC0 MII base register
+CONFIG_SYS_DISCOVER_PHY	-- enable PHY discovery
+CONFIG_SYS_RX_ETH_BUFFER	-- Set FEC Receive buffer
+CONFIG_SYS_FAULT_ECHO_LINK_DOWN--
+CONFIG_SYS_FEC0_PINMUX		-- Set FEC0 Pin configuration
+CONFIG_SYS_FEC1_PINMUX		-- Set FEC1 Pin configuration
+CONFIG_SYS_FEC0_MIIBASE	-- Set FEC0 MII base register
+CONFIG_SYS_FEC1_MIIBASE	-- Set FEC0 MII base register
 MCFFEC_TOUT_LOOP	-- set FEC timeout loop
 CONFIG_HAS_ETH1		-- define to enable second FEC in u-boot
 
@@ -100,14 +100,14 @@ CONFIG_IDE_RESET	-- define ide_reset()
 CONFIG_IDE_PREINIT	-- define ide_preinit()
 CONFIG_ATAPI		-- define ATAPI support
 CONFIG_LBA48		-- define LBA48 (larger than 120GB) support
-CFG_IDE_MAXBUS		-- define max channel
-CFG_IDE_MAXDEVICE	-- define max devices per channel
-CFG_ATA_BASE_ADDR	-- define ATA base address
-CFG_ATA_IDE0_OFFSET	-- define ATA IDE0 offset
-CFG_ATA_DATA_OFFSET	-- define ATA data IO
-CFG_ATA_REG_OFFSET	-- define for normal register accesses
-CFG_ATA_ALT_OFFSET	-- define for alternate registers
-CFG_ATA_STRIDE		-- define for Interval between registers
+CONFIG_SYS_IDE_MAXBUS		-- define max channel
+CONFIG_SYS_IDE_MAXDEVICE	-- define max devices per channel
+CONFIG_SYS_ATA_BASE_ADDR	-- define ATA base address
+CONFIG_SYS_ATA_IDE0_OFFSET	-- define ATA IDE0 offset
+CONFIG_SYS_ATA_DATA_OFFSET	-- define ATA data IO
+CONFIG_SYS_ATA_REG_OFFSET	-- define for normal register accesses
+CONFIG_SYS_ATA_ALT_OFFSET	-- define for alternate registers
+CONFIG_SYS_ATA_STRIDE		-- define for Interval between registers
 _IO_BASE		-- define for IO base address
 
 CONFIG_MCFTMR		-- define to use DMA timer
@@ -116,42 +116,42 @@ CONFIG_MCFPIT		-- define to use PIT timer
 CONFIG_FSL_I2C		-- define to use FSL common I2C driver
 CONFIG_HARD_I2C		-- define for I2C hardware support
 CONFIG_SOFT_I2C		-- define for I2C bit-banged
-CFG_I2C_SPEED		-- define for I2C speed
-CFG_I2C_SLAVE		-- define for I2C slave address
-CFG_I2C_OFFSET		-- define for I2C base address offset
-CFG_IMMR		-- define for MBAR offset
+CONFIG_SYS_I2C_SPEED		-- define for I2C speed
+CONFIG_SYS_I2C_SLAVE		-- define for I2C slave address
+CONFIG_SYS_I2C_OFFSET		-- define for I2C base address offset
+CONFIG_SYS_IMMR		-- define for MBAR offset
 
 CONFIG_PCI              -- define for PCI support
 CONFIG_PCI_PNP          -- define for Plug n play support
-CFG_PCI_MEM_BUS		-- PCI memory logical offset
-CFG_PCI_MEM_PHYS	-- PCI memory physical offset
-CFG_PCI_MEM_SIZE	-- PCI memory size
-CFG_PCI_IO_BUS		-- PCI IO logical offset
-CFG_PCI_IO_PHYS		-- PCI IO physical offset
-CFG_PCI_IO_SIZE		-- PCI IO size
-CFG_PCI_CFG_BUS		-- PCI Configuration logical offset
-CFG_PCI_CFG_PHYS	-- PCI Configuration physical offset
-CFG_PCI_CFG_SIZE	-- PCI Configuration size
+CONFIG_SYS_PCI_MEM_BUS		-- PCI memory logical offset
+CONFIG_SYS_PCI_MEM_PHYS	-- PCI memory physical offset
+CONFIG_SYS_PCI_MEM_SIZE	-- PCI memory size
+CONFIG_SYS_PCI_IO_BUS		-- PCI IO logical offset
+CONFIG_SYS_PCI_IO_PHYS		-- PCI IO physical offset
+CONFIG_SYS_PCI_IO_SIZE		-- PCI IO size
+CONFIG_SYS_PCI_CFG_BUS		-- PCI Configuration logical offset
+CONFIG_SYS_PCI_CFG_PHYS	-- PCI Configuration physical offset
+CONFIG_SYS_PCI_CFG_SIZE	-- PCI Configuration size
 
 CONFIG_EXTRA_CLOCK	-- Enable extra clock such as vco, flexbus, pci, etc
 
-CFG_MBAR		-- define MBAR offset
+CONFIG_SYS_MBAR		-- define MBAR offset
 
-CFG_ATMEL_BOOT		-- To determine the u-boot is booted from Atmel or Intel
+CONFIG_SYS_ATMEL_BOOT		-- To determine the u-boot is booted from Atmel or Intel
 
 CONFIG_MONITOR_IS_IN_RAM -- Not support
 
-CFG_INIT_RAM_ADDR	-- defines the base address of the MCF54455 internal SRAM
+CONFIG_SYS_INIT_RAM_ADDR	-- defines the base address of the MCF54455 internal SRAM
 
-CFG_CSn_BASE	-- defines the Chip Select Base register
-CFG_CSn_MASK	-- defines the Chip Select Mask register
-CFG_CSn_CTRL	-- defines the Chip Select Control register
+CONFIG_SYS_CSn_BASE	-- defines the Chip Select Base register
+CONFIG_SYS_CSn_MASK	-- defines the Chip Select Mask register
+CONFIG_SYS_CSn_CTRL	-- defines the Chip Select Control register
 
-CFG_ATMEL_BASE	-- defines the Atmel Flash base
-CFG_INTEL_BASE	-- defines the Intel Flash base
+CONFIG_SYS_ATMEL_BASE	-- defines the Atmel Flash base
+CONFIG_SYS_INTEL_BASE	-- defines the Intel Flash base
 
-CFG_SDRAM_BASE	-- defines the DRAM Base
-CFG_SDRAM_BASE1	-- defines the DRAM Base 1
+CONFIG_SYS_SDRAM_BASE	-- defines the DRAM Base
+CONFIG_SYS_SDRAM_BASE1	-- defines the DRAM Base 1
 
 2. MEMORY MAP UNDER U-BOOT AND LINUX KERNEL
 ===========================================
diff --git a/doc/README.m5475evb b/doc/README.m5475evb
index 37d143878..dc9a60571 100644
--- a/doc/README.m5475evb
+++ b/doc/README.m5475evb
@@ -74,20 +74,20 @@ CONFIG_M547x		-- define for all Freescale MCF547x CPUs
 CONFIG_M5475		-- define for M5475EVB board
 
 CONFIG_MCFUART		-- define to use common CF Uart driver
-CFG_UART_PORT		-- define UART port number, start with 0, 1 and 2
+CONFIG_SYS_UART_PORT		-- define UART port number, start with 0, 1 and 2
 CONFIG_BAUDRATE		-- define UART baudrate
 
 CONFIG_FSLDMAFEC	-- define to use common dma FEC driver
 CONFIG_NET_MULTI	-- define to use multi FEC in u-boot
 CONFIG_MII		-- enable to use MII driver
 CONFIG_CF_DOMII		-- enable to use MII feature in cmd_mii.c
-CFG_DISCOVER_PHY	-- enable PHY discovery
-CFG_RX_ETH_BUFFER	-- Set FEC Receive buffer
-CFG_FAULT_ECHO_LINK_DOWN--
-CFG_FEC0_PINMUX		-- Set FEC0 Pin configuration
-CFG_FEC1_PINMUX		-- Set FEC1 Pin configuration
-CFG_FEC0_MIIBASE	-- Set FEC0 MII base register
-CFG_FEC1_MIIBASE	-- Set FEC0 MII base register
+CONFIG_SYS_DISCOVER_PHY	-- enable PHY discovery
+CONFIG_SYS_RX_ETH_BUFFER	-- Set FEC Receive buffer
+CONFIG_SYS_FAULT_ECHO_LINK_DOWN--
+CONFIG_SYS_FEC0_PINMUX		-- Set FEC0 Pin configuration
+CONFIG_SYS_FEC1_PINMUX		-- Set FEC1 Pin configuration
+CONFIG_SYS_FEC0_MIIBASE	-- Set FEC0 MII base register
+CONFIG_SYS_FEC1_MIIBASE	-- Set FEC0 MII base register
 MCFFEC_TOUT_LOOP	-- set FEC timeout loop
 CONFIG_HAS_ETH1		-- define to enable second FEC in u-boot
 
@@ -101,35 +101,35 @@ CONFIG_SLTTMR		-- define to use SLT timer
 CONFIG_FSL_I2C		-- define to use FSL common I2C driver
 CONFIG_HARD_I2C		-- define for I2C hardware support
 CONFIG_SOFT_I2C		-- define for I2C bit-banged
-CFG_I2C_SPEED		-- define for I2C speed
-CFG_I2C_SLAVE		-- define for I2C slave address
-CFG_I2C_OFFSET		-- define for I2C base address offset
-CFG_IMMR		-- define for MBAR offset
+CONFIG_SYS_I2C_SPEED		-- define for I2C speed
+CONFIG_SYS_I2C_SLAVE		-- define for I2C slave address
+CONFIG_SYS_I2C_OFFSET		-- define for I2C base address offset
+CONFIG_SYS_IMMR		-- define for MBAR offset
 
 CONFIG_PCI		-- define for PCI support
 CONFIG_PCI_PNP		-- define for Plug n play support
 CONFIG_SKIPPCI_HOSTBRIDGE	-- SKIP PCI Host bridge
-CFG_PCI_MEM_BUS		-- PCI memory logical offset
-CFG_PCI_MEM_PHYS	-- PCI memory physical offset
-CFG_PCI_MEM_SIZE	-- PCI memory size
-CFG_PCI_IO_BUS		-- PCI IO logical offset
-CFG_PCI_IO_PHYS		-- PCI IO physical offset
-CFG_PCI_IO_SIZE		-- PCI IO size
-CFG_PCI_CFG_BUS		-- PCI Configuration logical offset
-CFG_PCI_CFG_PHYS	-- PCI Configuration physical offset
-CFG_PCI_CFG_SIZE	-- PCI Configuration size
+CONFIG_SYS_PCI_MEM_BUS		-- PCI memory logical offset
+CONFIG_SYS_PCI_MEM_PHYS	-- PCI memory physical offset
+CONFIG_SYS_PCI_MEM_SIZE	-- PCI memory size
+CONFIG_SYS_PCI_IO_BUS		-- PCI IO logical offset
+CONFIG_SYS_PCI_IO_PHYS		-- PCI IO physical offset
+CONFIG_SYS_PCI_IO_SIZE		-- PCI IO size
+CONFIG_SYS_PCI_CFG_BUS		-- PCI Configuration logical offset
+CONFIG_SYS_PCI_CFG_PHYS	-- PCI Configuration physical offset
+CONFIG_SYS_PCI_CFG_SIZE	-- PCI Configuration size
 
-CFG_MBAR		-- define MBAR offset
+CONFIG_SYS_MBAR		-- define MBAR offset
 
 CONFIG_MONITOR_IS_IN_RAM -- Not support
 
-CFG_INIT_RAM_ADDR	-- defines the base address of the MCF547x internal SRAM
+CONFIG_SYS_INIT_RAM_ADDR	-- defines the base address of the MCF547x internal SRAM
 
-CFG_CSn_BASE	-- defines the Chip Select Base register
-CFG_CSn_MASK	-- defines the Chip Select Mask register
-CFG_CSn_CTRL	-- defines the Chip Select Control register
+CONFIG_SYS_CSn_BASE	-- defines the Chip Select Base register
+CONFIG_SYS_CSn_MASK	-- defines the Chip Select Mask register
+CONFIG_SYS_CSn_CTRL	-- defines the Chip Select Control register
 
-CFG_SDRAM_BASE	-- defines the DRAM Base
+CONFIG_SYS_SDRAM_BASE	-- defines the DRAM Base
 
 2. MEMORY MAP UNDER U-BOOT AND LINUX KERNEL
 ===========================================
diff --git a/doc/README.m68k b/doc/README.m68k
index 0c533f3fa..e6c33a7d9 100644
--- a/doc/README.m68k
+++ b/doc/README.m68k
@@ -72,7 +72,7 @@ For the preloader, please see
 http://mailman.uclinux.org/pipermail/uclinux-dev/2003-December/023384.html
 
 U-boot is configured to run at 0x20000 at default. This can be configured by
-change TEXT_BASE in board/m5282evb/config.mk and CFG_MONITOR_BASE in
+change TEXT_BASE in board/m5282evb/config.mk and CONFIG_SYS_MONITOR_BASE in
 include/configs/M5282EVB.h.
 
 3.2 BuS EB+MCF-EV123
@@ -95,7 +95,7 @@ If u-boot should be loaded to RAM and started by a pre-loader
 CONFIG_MONITOR_IS_IN_RAM must be defined. If it is defined the
 initial vector table and basic processor initialization will not
 be compiled in. The start address of u-boot must be adjusted in
-the boards config header file (CFG_MONITOR_BASE) and Makefile
+the boards config header file (CONFIG_SYS_MONITOR_BASE) and Makefile
 (TEXT_BASE) to the load address.
 
 4.1 MCF5272 specific Options/Settings
@@ -107,20 +107,20 @@ CONFIG_M5272	-- defined for all Motorola MCF5272 CPUs
 CONFIG_MONITOR_IS_IN_RAM
 		-- defined if u-boot is loaded by a pre-loader
 
-CFG_MBAR	-- defines the base address of the MCF5272 configuration registers
-CFG_INIT_RAM_ADDR
+CONFIG_SYS_MBAR	-- defines the base address of the MCF5272 configuration registers
+CONFIG_SYS_INIT_RAM_ADDR
 		-- defines the base address of the MCF5272 internal SRAM
-CFG_ENET_BD_BASE
+CONFIG_SYS_ENET_BD_BASE
 		-- defines the base addres of the FEC buffer descriptors
 
-CFG_SCR		-- defines the contents of the System Configuration Register
-CFG_SPR		-- defines the contents of the System Protection Register
-CFG_BRx_PRELIM	-- defines the contents of the Chip Select Base Registers
-CFG_ORx_PRELIM	-- defines the contents of the Chip Select Option Registers
+CONFIG_SYS_SCR		-- defines the contents of the System Configuration Register
+CONFIG_SYS_SPR		-- defines the contents of the System Protection Register
+CONFIG_SYS_BRx_PRELIM	-- defines the contents of the Chip Select Base Registers
+CONFIG_SYS_ORx_PRELIM	-- defines the contents of the Chip Select Option Registers
 
-CFG_PxDDR	-- defines the contents of the Data Direction Registers
-CFG_PxDAT	-- defines the contents of the Data Registers
-CFG_PXCNT	-- defines the contents of the Port Configuration Registers
+CONFIG_SYS_PxDDR	-- defines the contents of the Data Direction Registers
+CONFIG_SYS_PxDAT	-- defines the contents of the Data Registers
+CONFIG_SYS_PXCNT	-- defines the contents of the Port Configuration Registers
 
 
 4.2 MCF5282 specific Options/Settings
@@ -132,32 +132,32 @@ CONFIG_M5282	-- defined for all Motorola MCF5282 CPUs
 CONFIG_MONITOR_IS_IN_RAM
 		-- defined if u-boot is loaded by a pre-loader
 
-CFG_MBAR	-- defines the base address of the MCF5282 internal register space
-CFG_INIT_RAM_ADDR
+CONFIG_SYS_MBAR	-- defines the base address of the MCF5282 internal register space
+CONFIG_SYS_INIT_RAM_ADDR
 		-- defines the base address of the MCF5282 internal SRAM
-CFG_INT_FLASH_BASE
+CONFIG_SYS_INT_FLASH_BASE
 		-- defines the base address of the MCF5282 internal Flash memory
-CFG_ENET_BD_BASE
+CONFIG_SYS_ENET_BD_BASE
 		-- defines the base addres of the FEC buffer descriptors
 
-CFG_MFD
+CONFIG_SYS_MFD
 		-- defines the PLL Multiplication Factor Devider
 		   (see table 9-4 of MCF user manual)
-CFG_RFD		-- defines the PLL Reduce Frecuency Devider
+CONFIG_SYS_RFD		-- defines the PLL Reduce Frecuency Devider
 		   (see table 9-4 of MCF user manual)
 
-CFG_CSx_BASE	-- defines the base address of chip select x
-CFG_CSx_SIZE	-- defines the memory size (address range) of chip select x
-CFG_CSx_WIDTH	-- defines the bus with of chip select x
-CFG_CSx_RO	-- if set to 0 chip select x is read/wirte
+CONFIG_SYS_CSx_BASE	-- defines the base address of chip select x
+CONFIG_SYS_CSx_SIZE	-- defines the memory size (address range) of chip select x
+CONFIG_SYS_CSx_WIDTH	-- defines the bus with of chip select x
+CONFIG_SYS_CSx_RO	-- if set to 0 chip select x is read/wirte
 			else chipselct is read only
-CFG_CSx_WS	-- defines the number of wait states  of chip select x
+CONFIG_SYS_CSx_WS	-- defines the number of wait states  of chip select x
 
-CFG_PxDDR	-- defines the contents of the Data Direction Registers
-CFG_PxDAT	-- defines the contents of the Data Registers
-CFG_PXCNT	-- defines the contents of the Port Configuration Registers
+CONFIG_SYS_PxDDR	-- defines the contents of the Data Direction Registers
+CONFIG_SYS_PxDAT	-- defines the contents of the Data Registers
+CONFIG_SYS_PXCNT	-- defines the contents of the Port Configuration Registers
 
-CFG_PxPAR	-- defines the function of ports
+CONFIG_SYS_PxPAR	-- defines the function of ports
 
 
 5. COMPILER
diff --git a/doc/README.marubun-pcmcia b/doc/README.marubun-pcmcia
index 6099da2fb..d3563a3cd 100644
--- a/doc/README.marubun-pcmcia
+++ b/doc/README.marubun-pcmcia
@@ -33,28 +33,28 @@ U-Boot MARUBUN MR-SHPC-01 PCMCIA controller driver
 	Most devices have only one slot. You should define CONFIG_PCMCIA_SLOT_A .
 	ex.	#define CONFIG_PCMCIA_SLOT_A    1
 
-    * CFG_MARUBUN_MRSHPC
+    * CONFIG_SYS_MARUBUN_MRSHPC
 	This is MR-SHPC-01 PCMCIA controler base address.
 	You should do the setting matched to your environment.
-	ex.  #define CFG_MARUBUN_MRSHPC 0xb03fffe0
+	ex.  #define CONFIG_SYS_MARUBUN_MRSHPC 0xb03fffe0
 	     ( for MS7722SE01 environment )
 
-    * CFG_MARUBUN_MW1
+    * CONFIG_SYS_MARUBUN_MW1
 	This is MR-SHPC-01 memory window base address.
 	You should do the setting matched to your environment.
-	ex. #define CFG_MARUBUN_MW1 0xb0400000
+	ex. #define CONFIG_SYS_MARUBUN_MW1 0xb0400000
 	     ( for MS7722SE01 environment )
 
-    * CFG_MARUBUN_MW1
+    * CONFIG_SYS_MARUBUN_MW1
 	This is MR-SHPC-01 attribute window base address.
 	You should do the setting matched to your environment.
-	ex. #define CFG_MARUBUN_MW2 0xb0500000
+	ex. #define CONFIG_SYS_MARUBUN_MW2 0xb0500000
 	     ( for MS7722SE01 environment )
 
-    * CFG_MARUBUN_MW1
+    * CONFIG_SYS_MARUBUN_MW1
 	This is MR-SHPC-01 I/O window base address.
 	You should do the setting matched to your environment.
-	ex. #define CFG_MARUBUN_IO  0xb0600000
+	ex. #define CONFIG_SYS_MARUBUN_IO  0xb0600000
 	     ( for MS7722SE01 environment )
 
 3. Other
diff --git a/doc/README.mpc8313erdb b/doc/README.mpc8313erdb
index cd5668993..be7ef32b4 100644
--- a/doc/README.mpc8313erdb
+++ b/doc/README.mpc8313erdb
@@ -3,7 +3,7 @@ Freescale MPC8313ERDB Board
 
 1.	Board Switches and Jumpers
 
-	S3 is used to set CFG_RESET_SOURCE.
+	S3 is used to set CONFIG_SYS_RESET_SOURCE.
 
 	To boot the image at 0xFE000000 in NOR flash, use these DIP
 	switch settings for S3 S4:
@@ -15,6 +15,18 @@ Freescale MPC8313ERDB Board
 	  4321		  4321
 	(where the '*' indicates the position of the tab of the switch.)
 
+	To boot the image at the beginning of NAND flash, use these
+	DIP switch settings for S3 S4:
+
+	+------+	+------+
+	| *    |	|  *** |
+	|  *** |	| *    |
+	+------+ ON	+------+ ON
+	  4321		  4321
+	(where the '*' indicates the position of the tab of the switch.)
+
+	When booting from NAND, use u-boot-nand.bin, not u-boot.bin.
+
 2.	Memory Map
 	The memory map looks like this:
 
@@ -29,6 +41,9 @@ Freescale MPC8313ERDB Board
 					LED Control (CS3)
 	0xfe00_0000	0xfe7f_ffff	NOR FLASH (CS0)	 8M
 
+	When booting from NAND, NAND flash is CS0 and NOR flash
+	is CS1.
+
 3.	Definitions
 
 3.1	Explanation of NEW definitions in:
@@ -45,15 +60,20 @@ Freescale MPC8313ERDB Board
 
 	export CROSS_COMPILE=your-cross-compiler-prefix-
 	make distclean
-	make MPC8313ERDB_33_config
-	(or make MPC8313ERDB_66_config, depending on the speed of
-	 the oscillator on your board)
+	make MPC8313ERDB_XXX_config
+	(where XXX is:
+	   33 - 33 MHz oscillator, boot from NOR flash
+	   66 - 66 MHz oscillator, boot from NOR flash
+	   NAND_33 - 33 MHz oscillator, boot from NAND flash
+	   NAND_66 - 66 MHz oscillator, boot from NAND flash)
 	make
 
 5.	Downloading and Flashing Images
 
 5.1	Reflash U-boot Image using U-boot
 
+	NOR flash:
+
 	=>run tftpflash
 
 	You may want to try
@@ -63,6 +83,15 @@ Freescale MPC8313ERDB Board
 	have an alternate means of programming the flash available
 	if the new u-boot doesn't boot.
 
+	NAND flash:
+
+	=>tftpboot $loadaddr <filename>
+	=>nand erase 0 0x80000
+	=>nand write $loadaddr 0 0x80000
+
+	...where 0x80000 is the filesize rounded up to
+	the next 0x20000 increment.
+
 5.2	Downloading and Booting Linux Kernel
 
 	Ensure that all networking-related environment variables are set
@@ -79,5 +108,4 @@ Freescale MPC8313ERDB Board
 
 6	Notes
 
-	Booting from NAND flash is not yet supported.
 	The console baudrate for MPC8313ERDB is 115200bps.
diff --git a/doc/README.mpc8315erdb b/doc/README.mpc8315erdb
index e77eba710..7d476d001 100644
--- a/doc/README.mpc8315erdb
+++ b/doc/README.mpc8315erdb
@@ -3,7 +3,7 @@ Freescale MPC8315ERDB Board
 
 1.	Board Switches and Jumpers
 
-	S3 is used to set CFG_RESET_SOURCE.
+	S3 is used to set CONFIG_SYS_RESET_SOURCE.
 
 	To boot the image at 0xFE000000 in NOR flash, use these DIP
 	switch settings for S3 S4:
diff --git a/doc/README.mpc8641hpcn b/doc/README.mpc8641hpcn
index 1c41d77ab..d8fe0a4a1 100644
--- a/doc/README.mpc8641hpcn
+++ b/doc/README.mpc8641hpcn
@@ -21,16 +21,16 @@ Jumpers:
 	J14 Pins 1-2 (near plcc32 socket)
 
 Switches:
-	SW1(1-5) = 01100	CFG_COREPLL	= 01000 :: CORE =   2:1
+	SW1(1-5) = 01100	CONFIG_SYS_COREPLL	= 01000 :: CORE =   2:1
 						  01100 :: CORE = 2.5:1
 						  10000 :: CORE =   3:1
 						  11100 :: CORE = 3.5:1
 						  10100 :: CORE =   4:1
 						  01110 :: CORE = 4.5:1
-	SW1(6-8) = 001		CFG_SYSCLK	= 000	:: SYSCLK = 33MHz
+	SW1(6-8) = 001		CONFIG_SYS_SYSCLK	= 000	:: SYSCLK = 33MHz
 						  001	:: SYSCLK = 40MHz
 
-	SW2(1-4) = 1100		CFG_CCBPLL	= 0010	:: 2X
+	SW2(1-4) = 1100		CONFIG_SYS_CCBPLL	= 0010	:: 2X
 						  0100	:: 4X
 						  0110	:: 6X
 						  1000	:: 8X
@@ -38,34 +38,34 @@ Switches:
 						  1100	:: 12X
 						  1110	:: 14X
 						  0000	:: 16X
-	SW2(5-8) = 1110		CFG_BOOTLOC	= 1110	:: boot 16-bit localbus
+	SW2(5-8) = 1110		CONFIG_SYS_BOOTLOC	= 1110	:: boot 16-bit localbus
 
-	SW3(1-7) = 0011000	CFG_VID		= 0011000 :: VCORE = 1.2V
+	SW3(1-7) = 0011000	CONFIG_SYS_VID		= 0011000 :: VCORE = 1.2V
 						  0100000 :: VCORE = 1.11V
 	SW3(8)	 = 0		VCC_PLAT	= 0	:: VCC_PLAT = 1.2V
 						  1	:: VCC_PLAT = 1.0V
 
-	SW4(1-2) = 11		CFG_HOSTMODE	= 11	:: both prots host/root
-	SW4(3-4) = 11		CFG_BOOTSEQ	= 11	:: no boot seq
-	SW4(5-8) = 0011		CFG_IOPORT	= 0011	:: both PEX
+	SW4(1-2) = 11		CONFIG_SYS_HOSTMODE	= 11	:: both prots host/root
+	SW4(3-4) = 11		CONFIG_SYS_BOOTSEQ	= 11	:: no boot seq
+	SW4(5-8) = 0011		CONFIG_SYS_IOPORT	= 0011	:: both PEX
 
-	SW5(1)	 = 1		CFG_FLASHMAP	= 1	:: boot from flash
+	SW5(1)	 = 1		CONFIG_SYS_FLASHMAP	= 1	:: boot from flash
 						  0	:: boot from PromJet
-	SW5(2)	 = 1		CFG_FLASHBANK	= 1	:: swap upper/lower
+	SW5(2)	 = 1		CONFIG_SYS_FLASHBANK	= 1	:: swap upper/lower
 							 halves (virtual banks)
 						  0	:: normal
-	SW5(3)	 = 0		CFG_FLASHWP	= 0	:: not protected
-	SW5(4)	 = 0		CFG_PORTDIV	= 1	:: 2:1 for PD4
+	SW5(3)	 = 0		CONFIG_SYS_FLASHWP	= 0	:: not protected
+	SW5(4)	 = 0		CONFIG_SYS_PORTDIV	= 1	:: 2:1 for PD4
 							   1:1 for PD6
-	SW5(5-6) = 11		CFG_PIXISOPT	= 11	:: s/w determined
-	SW5(7-8) = 11		CFG_LADOPT	= 11	:: s/w determined
+	SW5(5-6) = 11		CONFIG_SYS_PIXISOPT	= 11	:: s/w determined
+	SW5(7-8) = 11		CONFIG_SYS_LADOPT	= 11	:: s/w determined
 
-	SW6(1)	 = 1		CFG_CPUBOOT	= 1	:: no boot holdoff
-	SW6(2)	 = 1		CFG_BOOTADDR	= 1	:: no traslation
-	SW6(3-5) = 000		CFG_REFCLKSEL	= 000	:: 100MHZ
-	SW6(6)	 = 1		CFG_SERROM_ADDR= 1	::
-	SW6(7)	 = 1		CFG_MEMDEBUG	= 1	::
-	SW6(8)	 = 1		CFG_DDRDEBUG	= 1	::
+	SW6(1)	 = 1		CONFIG_SYS_CPUBOOT	= 1	:: no boot holdoff
+	SW6(2)	 = 1		CONFIG_SYS_BOOTADDR	= 1	:: no traslation
+	SW6(3-5) = 000		CONFIG_SYS_REFCLKSEL	= 000	:: 100MHZ
+	SW6(6)	 = 1		CONFIG_SYS_SERROM_ADDR= 1	::
+	SW6(7)	 = 1		CONFIG_SYS_MEMDEBUG	= 1	::
+	SW6(8)	 = 1		CONFIG_SYS_DDRDEBUG	= 1	::
 
 	SW8(1)	 = 1		ACZ_SYNC	= 1	:: 48MHz on TP49
 	SW8(2)	 = 1		ACB_SYNC	= 1	:: THRMTRIP disabled
@@ -74,56 +74,82 @@ Switches:
 	SW8(5)	 = 0		SUSLED		= 0	:: SouthBridge Mode
 	SW8(6)	 = 0		SPREAD		= 0	:: REFCLK SSCG Disabled
 	SW8(7)	 = 1		ACPWR		= 1	:: non-battery
-	SW8(8)	 = 0		CFG_IDWP	= 0	:: write enable
+	SW8(8)	 = 0		CONFIG_SYS_IDWP	= 0	:: write enable
 
 
 3. Flash U-Boot
 ---------------
-The flash range 0xFF800000 to 0xFFFFFFFF can be divided into 2 halves.
+The flash range 0xEF800000 to 0xEFFFFFFF can be divided into 2 halves.
 It is possible to use either half to boot using u-boot.  Switch 5 bit 2
 is used for this purpose.
 
-0xFF800000 to 0xFFBFFFFF - 4MB
-0xFFC00000 to 0xFFFFFFFF - 4MB
-When this bit is 0, U-Boot is at 0xFFF00000.
-When this bit is 1, U-Boot is at 0xFFB00000.
+0xEF800000 to 0xEFBFFFFF - 4MB
+0xEFC00000 to 0xEFFFFFFF - 4MB
+When this bit is 0, U-Boot is at 0xEFF00000.
+When this bit is 1, U-Boot is at 0xEFB00000.
 
 Use the above mentioned flash commands to program the other half, and
 use switch 5, bit 2 to alternate between the halves.  Note: The booting
-version of U-Boot will always be at 0xFFF00000.
+version of U-Boot will always be at 0xEFF00000.
 
-To Flash U-Boot into the booting bank (0xFFC00000 - 0xFFFFFFFF):
+To Flash U-Boot into the booting bank (0xEFC00000 - 0xEFFFFFFF):
 
 	tftp 1000000 u-boot.bin
 	protect off all
-	erase fff00000 +$filesize
-	cp.b 1000000 fff00000 $filesize
+	erase eff00000 +$filesize
+	cp.b 1000000 eff00000 $filesize
 
 or use tftpflash command:
 	run tftpflash
 
-To Flash U-boot into the alternative bank (0xFF800000 - 0xFFBFFFFF):
+To Flash U-boot into the alternative bank (0xEF800000 - 0xEFBFFFFF):
 
 	tftp 1000000 u-boot.bin
-	erase ffb00000 +$filesize
-	cp.b 1000000 ffb00000 $filesize
+	erase efb00000 +$filesize
+	cp.b 1000000 efb00000 $filesize
 
 
 4. Memory Map
 -------------
+NOTE:  RIO and PCI are mutually exclusive, so they share an address
+
+For 32-bit u-boot, devices are mapped so that the virtual address ==
+the physical address, and the map looks liks this:
 
 	Memory Range			Device		Size
 	------------			------		----
 	0x0000_0000	0x7fff_ffff	DDR		2G
+	0x8000_0000	0x9fff_ffff	RIO MEM		512M
 	0x8000_0000	0x9fff_ffff	PCI1/PEX1 MEM	512M
-	0xa000_0000	0xafff_ffff	PCI2/PEX2 MEM	512M
-	0xf800_0000	0xf80f_ffff	CCSR		1M
-	0xf810_0000	0xf81f_ffff	PIXIS		1M
+	0xa000_0000	0xbfff_ffff	PCI2/PEX2 MEM	512M
+	0xffe0_0000	0xffef_ffff	CCSR		1M
+	0xffdf_0000	0xffdf_7fff	PIXIS		8K
+	0xffdf_8000	0xffdf_ffff	CF		8K
 	0xf840_0000	0xf840_3fff	Stack space	32K
-	0xe200_0000	0xe2ff_ffff	PCI1/PEX1 IO	16M
-	0xe300_0000	0xe3ff_ffff	PCI2/PEX2 IO	16M
-	0xfe00_0000	0xfeff_ffff	Flash(alternate)16M
-	0xff00_0000	0xffff_ffff	Flash(boot bank)16M
+	0xffc0_0000	0xffc0_ffff	PCI1/PEX1 IO	64K
+	0xffc1_0000	0xffc1_ffff	PCI2/PEX2 IO	64K
+	0xef80_0000	0xefff_ffff	Flash		8M
+
+For 36-bit-enabled u-boot, the virtual map is the same as for 32-bit.
+However, the physical map is altered to reside in 36-bit space, as follows.
+Addresses are no longer mapped with VA == PA.  All accesses from
+software use the VA; the PA is only used for setting up windows
+and mappings. Note that with the exception of PCI MEM and RIO, the low
+ 32 bits are the same as the VA above; only the top 4 bits vary:
+
+	Memory Range			Device		Size
+	------------			------		----
+	0x0_0000_0000	0x0_7fff_ffff	DDR		2G
+	0xc_0000_0000	0xc_1fff_ffff	RIO MEM		512M
+	0xc_0000_0000	0xc_1fff_ffff	PCI1/PEX1 MEM	512M
+	0xc_2000_0000	0xc_3fff_ffff	PCI2/PEX2 MEM	512M
+	0xf_ffe0_0000	0xf_ffef_ffff	CCSR		1M
+	0xf_ffdf_0000	0xf_ffdf_7fff	PIXIS		8K
+	0xf_ffdf_8000	0xf_ffdf_ffff	CF		8K
+	0x0_f840_0000	0xf_f840_3fff	Stack space	32K
+	0xf_ffc0_0000	0xf_ffc0_ffff	PCI1/PEX1 IO	64K
+	0xf_ffc1_0000	0xf_ffc1_ffff	PCI2/PEX2 IO	64K
+	0xf_ef80_0000	0xf_efff_ffff	Flash		8M
 
 5. pixis_reset command
 --------------------
diff --git a/doc/README.nand b/doc/README.nand
index 171380e27..bf80bc0a5 100644
--- a/doc/README.nand
+++ b/doc/README.nand
@@ -95,7 +95,7 @@ Configuration Options:
       CONFIG_MTD_NAND_ECC_YAFFS would be another useful choice for
       someone to implement.
 
-   CFG_MAX_NAND_DEVICE
+   CONFIG_SYS_MAX_NAND_DEVICE
       The maximum number of NAND devices you want to support.
 
 NAND Interface:
@@ -164,7 +164,7 @@ More Definitions:
    These definitions are needed in the board configuration for now, but
    may really belong in a header file.
    TODO: Figure which ones are truly configuration settings and rename
-	 them to CFG_NAND_... and move the rest somewhere appropriate.
+	 them to CONFIG_SYS_NAND_... and move the rest somewhere appropriate.
 
    #define SECTORSIZE 512
    #define ADDR_COLUMN 1
@@ -174,6 +174,14 @@ More Definitions:
    #define NAND_MAX_FLOORS 1
    #define NAND_MAX_CHIPS 1
 
+   #define CONFIG_SYS_DAVINCI_BROKEN_ECC
+      Versions of U-Boot <= 1.3.3 and Montavista Linux kernels
+      generated bogus ECCs on large-page NAND. Both large and small page
+      NAND ECCs were incompatible with the Linux davinci git tree (since
+      NAND was integrated in 2.6.24).
+      Turn this ON if you want backwards compatibility.
+      Turn this OFF if you want U-Boot and the Linux davinci git kernel
+      to use the same ECC format.
 
 NOTE:
 =====
diff --git a/doc/README.nios b/doc/README.nios
index 671e7277f..7f3493808 100644
--- a/doc/README.nios
+++ b/doc/README.nios
@@ -68,11 +68,11 @@ port are not currently implemented.
 2.1 Nios-specific Options/Settings
 -----------------------------------
 All configuration options/settings that are specific to Nios begin
-with "CONFIG_NIOS_", "CFG_NIOS_", or "CFG_NIOS_CPU_".
+with "CONFIG_NIOS_", "CONFIG_SYS_NIOS_", or "CONFIG_SYS_NIOS_CPU_".
 
 The configuration follows a two-stage process. In the first stage
 the NIOS CPU core will defined like defined in Alteras SOPC Builder.
-At this point we use the "CFG_NIOS_CPU_" defines exclusively. For
+At this point we use the "CONFIG_SYS_NIOS_CPU_" defines exclusively. For
 more informations about all the definitions you have to setup see
 into current board configurations and doc/README.nios_CFG_NIOS_CPU.
 
@@ -85,41 +85,41 @@ description).
 
 CONFIG_NIOS -- defined for all Nios-32 boards.
 
-CFG_NIOS_CONSOLE -- the base address of the console UART or the JTAG
+CONFIG_SYS_NIOS_CONSOLE -- the base address of the console UART or the JTAG
 	stdio port. To enable a console via JTAG, define
 	CONFIG_CONSOLE_JTAG and set CGF_NIOS_CONSOLE to the base address
 	of the JTAG stdio port (normally OCI base + 0x00fa). Then
 	run nios-console with the -w option.
 	(standard-32: nasys_uart_0 resp. na_uart1_base).
 
-CFG_NIOS_FIXEDBAUD -- defined if the console UART PTF fixed_baud
+CONFIG_SYS_NIOS_FIXEDBAUD -- defined if the console UART PTF fixed_baud
 	parameter is set to '1'.
 
-CFG_NIOS_MULT_HW -- use full hardware multiply (not yet implemented).
+CONFIG_SYS_NIOS_MULT_HW -- use full hardware multiply (not yet implemented).
 
-CFG_NIOS_MULT_MSTEP -- use hardware assisted multiply using the
+CONFIG_SYS_NIOS_MULT_MSTEP -- use hardware assisted multiply using the
 	MSTEP instruction (not yet implemented).
 
-CFG_NIOS_TMRBASE -- the base address of the timer used to support
+CONFIG_SYS_NIOS_TMRBASE -- the base address of the timer used to support
 	xxx_timer routines (e.g. set_timer(), get_timer(), etc.).
 	(standard-32: nasys_timer_1 resp. na_lo_priority_timer2_base).
 
-CFG_NIOS_TMRIRQ -- the interrupt request (vector number) assigned to
+CONFIG_SYS_NIOS_TMRIRQ -- the interrupt request (vector number) assigned to
 	the timer. (standard-32: nasys_timer_1_irq resp.
 	na_low_priority_timer2_irq).
 
-CFG_NIOS_TMRMS -- the period of the timer in milliseconds.
+CONFIG_SYS_NIOS_TMRMS -- the period of the timer in milliseconds.
 
-CFG_NIOS_TMRCNT -- the preloadable counter value for the timer if it has
+CONFIG_SYS_NIOS_TMRCNT -- the preloadable counter value for the timer if it has
 	no fixed period.
 
-CFG_NIOS_ASMIBASE -- the base address of the ASMI peripheral.
+CONFIG_SYS_NIOS_ASMIBASE -- the base address of the ASMI peripheral.
 	(standard-32: na_asmi_base).
 
-CFG_NIOS_SPIBASE -- the base address of the SPI master (!) peripheral.
+CONFIG_SYS_NIOS_SPIBASE -- the base address of the SPI master (!) peripheral.
 	(nasys_spi_0)
 
-CFG_NIOS_SPIBITS -- the amount of configured SPI data bits in PTF.
+CONFIG_SYS_NIOS_SPIBITS -- the amount of configured SPI data bits in PTF.
 	This value can be 8 or 16 only! (PTF: databits)
 
 
@@ -128,7 +128,7 @@ CFG_NIOS_SPIBITS -- the amount of configured SPI data bits in PTF.
 Some 'standard' U-Boot options/settings are treated differently in
 the Nios port. These are described below.
 
-CFG_GBL_DATA_OFFSET -- in the Nios port, this is the offset of the
+CONFIG_SYS_GBL_DATA_OFFSET -- in the Nios port, this is the offset of the
 	global data structure in the Nios memory space. More simply,
 	the address of global data.
 
@@ -156,17 +156,17 @@ but does not appear in the programmer's manual.
 4.1 Boot process over GERMS
 ---------------------------
 When the NIOS CPU catch a reset signal it will begin to be running
-code from CFG_NIOS_CPU_RST_VECT. Normally at this place it will
+code from CONFIG_SYS_NIOS_CPU_RST_VECT. Normally at this place it will
 find the GERMS monitor. That's the case for the generic NIOS CPU
 configuration "standard_32". When the GERMS monitor starts running,
 it performs important system initializations and then looks for
 executable code in flash, using the following steps:
 
-    1. Examining the two bytes at CFG_NIOS_CPU_FLASH_BASE + 0x04000C.
-    2. Examining the button 0 on the PIO CFG_NIOS_CPU_BUTTON_PIO.
+    1. Examining the two bytes at CONFIG_SYS_NIOS_CPU_FLASH_BASE + 0x04000C.
+    2. Examining the button 0 on the PIO CONFIG_SYS_NIOS_CPU_BUTTON_PIO.
     3. If the button is not pressed and the two bytes contain 'N'
        and 'i', the monitor executes a CALL to location
-       CFG_NIOS_CPU_FLASH_BASE + 0x040000.
+       CONFIG_SYS_NIOS_CPU_FLASH_BASE + 0x040000.
     4. If the code is not executed in step 3 or the code returns,
        then prints an 8-digit version number to STDOUT and waits for
        user commands from STDIN.
@@ -181,9 +181,9 @@ of application software in flash memory. If found, the processor
 immediately executes the code. To return program execution to the
 GERMS monitor (that is, avoid running code stored in flash memory):
 
-    1. Hold down CFG_NIOS_CPU_BUTTON_PIO, button number 0.
+    1. Hold down CONFIG_SYS_NIOS_CPU_BUTTON_PIO, button number 0.
     2. Press then release the CPU reset button.
-    3. Release CFG_NIOS_CPU_BUTTON_PIO, button number 0.
+    3. Release CONFIG_SYS_NIOS_CPU_BUTTON_PIO, button number 0.
 
 
 5. DEBUGGING WITH GDB
@@ -325,16 +325,16 @@ For developers using the Altera cygwin tools you can remove the
 also have to edit common/Makefile:
 
 Replace:
-environment.o: environment.c ../tools/envcrc
+env_embedded.o: env_embedded.c ../tools/envcrc
 	$(CC) $(AFLAGS) -Wa,--no-warn \
 		-DENV_CRC=$(shell ../tools/envcrc) \
-		-c -o $@ environment.c
+		-c -o $@ env_embedded.c
 
 With:
-environment.o: environment.c
+env_embedded.o: env_embedded.c
 	$(CC) $(AFLAGS) -Wa,--no-warn \
 		-DENV_CRC=0 \
-		-c -o $@ environment.c
+		-c -o $@ env_embedded.c
 
 BTW, thats a 'zero' ... not the letter 'O'. And not that the
 "../tools/envcrc" dependency is removed.
@@ -354,7 +354,7 @@ for those interested in contributing:
 -Add boot support for ucLinux (niosnommu).
 
 -Implement (don't copy Altera code) the __mulxx routines using the
- MSTEP and MUL instructions (e.g. CFG_NIOS_MULT_HW and CFG_NIOS_MULT_MSTEP).
+ MSTEP and MUL instructions (e.g. CONFIG_SYS_NIOS_MULT_HW and CONFIG_SYS_NIOS_MULT_MSTEP).
 
 
 Regards,
diff --git a/doc/README.nios_CFG_NIOS_CPU b/doc/README.nios_CFG_NIOS_CPU
deleted file mode 100644
index e38ed9172..000000000
--- a/doc/README.nios_CFG_NIOS_CPU
+++ /dev/null
@@ -1,140 +0,0 @@
-
-===============================================================================
-	C F G _ N I O S _ C P U _ *   v s .   N I O S	S D K
-===============================================================================
-
-When ever you have to make a new NIOS CPU configuration you can use this table
-as a reference list to the original NIOS SDK symbols made by Alteras SOPC
-Builder. Look into excalibur.h and excalibur.s in your SDK path cpu_sdk/inc.
-Symbols beginning with a '[ptf]:' are coming from your SOPC sytem description
-(PTF file) in sections WIZARD_SCRIPT_ARGUMENTS or SYSTEM_BUILDER_INFO.
-
-C O R E					N I O S	  S D K			[1],[7]
--------------------------------------------------------------------------------
-CFG_NIOS_CPU_CLK					nasys_clock_freq
-CFG_NIOS_CPU_ICACHE					nasys_icache_size
-CFG_NIOS_CPU_DCACHE					nasys_dcache_size
-CFG_NIOS_CPU_REG_NUMS					nasys_nios_num_regs
-CFG_NIOS_CPU_MUL					__nios_use_multiply__
-CFG_NIOS_CPU_MSTEP					__nios_use_mstep__
-CFG_NIOS_CPU_STACK					nasys_stack_top
-CFG_NIOS_CPU_VEC_BASE					nasys_vector_table
-CFG_NIOS_CPU_VEC_SIZE					nasys_vector_table_size
-CFG_NIOS_CPU_VEC_NUMS
-CFG_NIOS_CPU_RST_VECT					nasys_reset_address
-CFG_NIOS_CPU_DBG_CORE					nasys_debug_core
-CFG_NIOS_CPU_RAM_BASE		na_onchip_ram_64_kbytes
-CFG_NIOS_CPU_RAM_SIZE		na_onchip_ram_64_kbytes_size
-CFG_NIOS_CPU_ROM_BASE		na_boot_monitor_rom
-CFG_NIOS_CPU_ROM_SIZE		na_boot_monitor_rom_size
-CFG_NIOS_CPU_OCI_BASE					nasys_oci_core
-CFG_NIOS_CPU_OCI_SIZE
-CFG_NIOS_CPU_SRAM_BASE		na_ext_ram		nasys_program_mem
-							nasys_data_mem
-CFG_NIOS_CPU_SRAM_SIZE		na_ext_ram_size		nasys_program_mem_size
-							nasys_data_mem_size
-CFG_NIOS_CPU_SDRAM_BASE		 na_sdram
-CFG_NIOS_CPU_SDRAM_SIZE		 na_sdram_size
-CFG_NIOS_CPU_FLASH_BASE		 na_ext_flash		nasys_main_flash
-							nasys_am29lv065d_flash_0
-							nasys_flash_0
-CFG_NIOS_CPU_FLASH_SIZE	    na_ext_flash_size		nasys_main_flash_size
-
-T I M E R				N I O S	  S D K			    [3]
--------------------------------------------------------------------------------
-CFG_NIOS_CPU_TIMER_NUMS					nasys_timer_count
-CFG_NIOS_CPU_TIMER[0-9]					nasys_timer_[0-9]
-CFG_NIOS_CPU_TIMER[0-9]_IRQ				nasys_timer_[0-9]_irq
-CFG_NIOS_CPU_TIMER[0-9]_PER				[ptf]:period
-							[ptf]:period_units
-							[ptf]:mult
-CFG_NIOS_CPU_TIMER[0-9]_AR				[ptf]:always_run
-CFG_NIOS_CPU_TIMER[0-9]_FP				[ptf]:fixed_period
-CFG_NIOS_CPU_TIMER[0-9]_SS				[ptf]:snapshot
-
-U A R T					N I O S	  S D K			    [2]
--------------------------------------------------------------------------------
-CFG_NIOS_CPU_UART_NUMS					nasys_uart_count
-CFG_NIOS_CPU_UART[0-9]					nasys_uart_[0-9]
-CFG_NIOS_CPU_UART[0-9]_IRQ				nasys_uart_[0-9]_irq
-CFG_NIOS_CPU_UART[0-9]_BR				[ptf]:baud
-CFG_NIOS_CPU_UART[0-9]_DB				[ptf]:data_bits
-CFG_NIOS_CPU_UART[0-9]_SB				[ptf]:stop_bits
-CFG_NIOS_CPU_UART[0-9]_PA				[ptf]:parity
-CFG_NIOS_CPU_UART[0-9]_HS				[ptf]:use_cts_rts
-CFG_NIOS_CPU_UART[0-9]_EOP				[ptf]:use_eop_register
-
-P I O					N I O S	  S D K			    [4]
--------------------------------------------------------------------------------
-CFG_NIOS_CPU_PIO_NUMS					nasys_pio_count
-CFG_NIOS_CPU_PIO[0-9]					nasys_pio_[0-9]
-CFG_NIOS_CPU_PIO[0-9]_IRQ				nasys_pio_[0-9]_irq
-CFG_NIOS_CPU_PIO[0-9]_BITS				[ptf]:Data_Width
-CFG_NIOS_CPU_PIO[0-9]_TYPE				[ptf]:has_tri
-							[ptf]:has_out
-							[ptf]:has_in
-CFG_NIOS_CPU_PIO[0-9]_CAP				[ptf]:capture
-CFG_NIOS_CPU_PIO[0-9]_EDGE				[ptf]:edge_type
-CFG_NIOS_CPU_PIO[0-9]_ITYPE				[ptf]:irq_type
-
-S P I					N I O S	  S D K			    [6]
--------------------------------------------------------------------------------
-CFG_NIOS_CPU_SPI_NUMS					nasys_spi_count
-CFG_NIOS_CPU_SPI[0-9]					nasys_spi_[0-9]
-CFG_NIOS_CPU_SPI[0-9]_IRQ				nasys_spi_[0-9]_irq
-CFG_NIOS_CPU_SPI[0-9]_BITS				[ptf]:databits
-CFG_NIOS_CPU_SPI[0-9]_MA				[ptf]:ismaster
-CFG_NIOS_CPU_SPI[0-9]_SLN				[ptf]:numslaves
-CFG_NIOS_CPU_SPI[0-9]_TCLK				[ptf]:targetclock
-CFG_NIOS_CPU_SPI[0-9]_TDELAY				[ptf]:targetdelay
-CFG_NIOS_CPU_SPI[0-9]_*					[ptf]:*
-
-I D E					N I O S	  S D K
--------------------------------------------------------------------------------
-CFG_NIOS_CPU_IDE_NUMS					nasys_usersocket_count
-CFG_NIOS_CPU_IDE[0-9]					nasys_usersocket_[0-9]
-
-A S M I					N I O S	  S D K			    [5]
--------------------------------------------------------------------------------
-CFG_NIOS_CPU_ASMI_NUMS					nasys_asmi_count
-CFG_NIOS_CPU_ASMI[0-9]					nasys_asmi_[0-9]
-CFG_NIOS_CPU_ASMI[0-9]_IRQ				nasys_asmi_[0-9]_irq
-
-E t h e r n e t	  ( L A N )		N I O S	  S D K
--------------------------------------------------------------------------------
-CFG_NIOS_CPU_LAN_NUMS
-CFG_NIOS_CPU_LAN[0-9]_BASE	na_lan91c111
-CFG_NIOS_CPU_LAN[0-9]_OFFS				LAN91C111_REGISTERS_OFFSET
-CFG_NIOS_CPU_LAN[0-9]_IRQ	na_lan91c111_irq
-CFG_NIOS_CPU_LAN[0-9]_BUSW				LAN91C111_DATA_BUS_WIDTH
-CFG_NIOS_CPU_LAN[0-9]_TYPE
-
-s y s t e m   c o m p o s i n g		N I O S	  S D K
--------------------------------------------------------------------------------
-CFG_NIOS_CPU_TICK_TIMER		(na_low_priority_timer2)
-CFG_NIOS_CPU_USER_TIMER		(na_timer1)
-CFG_NIOS_CPU_BUTTON_PIO		(na_button_pio)
-CFG_NIOS_CPU_LCD_PIO		(na_lcd_pio)
-CFG_NIOS_CPU_LED_PIO		(na_led_pio)
-CFG_NIOS_CPU_SEVENSEG_PIO	(na_seven_seg_pio)
-CFG_NIOS_CPU_RECONF_PIO		(na_reconfig_request_pio)
-CFG_NIOS_CPU_CFPRESENT_PIO	(na_cf_present_pio)
-CFG_NIOS_CPU_CFPOWER_PIO	(na_cf_power_pio)
-CFG_NIOS_CPU_CFATASEL_PIO	(na_cf_ata_select_pio)
-CFG_NIOS_CPU_USER_SPI		(na_spi)
-
-
-===============================================================================
-	R E F E R E N C E S
-===============================================================================
-[1]	http://www.altera.com/literature/ds/ds_nioscpu.pdf
-[2]	http://www.altera.com/literature/ds/ds_nios_uart.pdf
-[3]	http://www.altera.com/literature/ds/ds_nios_timer.pdf
-[4]	http://www.altera.com/literature/ds/ds_nios_pio.pdf
-[5]	http://www.altera.com/literature/ds/ds_nios_asmi.pdf
-[6]	http://www.altera.com/literature/ds/ds_nios_spi.pdf
-[7]	http://www.altera.com/literature/ds/ds_legacy_sdram_ctrl.pdf
-
-
-===============================================================================
-Stephan Linz <linz@li-pro.net>
diff --git a/doc/README.ppc440 b/doc/README.ppc440
index 2e04abacc..0a5f99fb1 100644
--- a/doc/README.ppc440
+++ b/doc/README.ppc440
@@ -47,25 +47,25 @@ the cpu-specific code (vs. board-specific code), so you should
 at least review these before deciding to make any changes ... it
 will probably save you some headaches ;-)
 
-CFG_SDRAM_BASE - The virtual address where SDRAM is mapped (always 0)
+CONFIG_SYS_SDRAM_BASE - The virtual address where SDRAM is mapped (always 0)
 
-CFG_FLASH_BASE - The virtual address where FLASH is mapped.
+CONFIG_SYS_FLASH_BASE - The virtual address where FLASH is mapped.
 
-CFG_PCI_MEMBASE - The virtual address where PCI-bus memory is mapped.
+CONFIG_SYS_PCI_MEMBASE - The virtual address where PCI-bus memory is mapped.
     This mapping provides access to PCI-bus memory.
 
-CFG_PERIPHERAL_BASE - The virtual address where the 440 memory-mapped
+CONFIG_SYS_PERIPHERAL_BASE - The virtual address where the 440 memory-mapped
     peripherals are mapped. (e.g. -- UART registers, IIC registers, etc).
 
-CFG_ISRAM_BASE - The virtual address where the 440 internal SRAM is
+CONFIG_SYS_ISRAM_BASE - The virtual address where the 440 internal SRAM is
     mapped. The internal SRAM is equivalent to 405gp OCM and is used
     for the initial stack.
 
-CFG_PCI_BASE - The virtual address where the 440 PCI-x bridge config
+CONFIG_SYS_PCI_BASE - The virtual address where the 440 PCI-x bridge config
     registers are mapped.
 
-CFG_PCI_TARGBASE - The PCI address that is mapped to the virtual address
-    defined by CFG_PCI_MEMBASE.
+CONFIG_SYS_PCI_TARGBASE - The PCI address that is mapped to the virtual address
+    defined by CONFIG_SYS_PCI_MEMBASE.
 
 
 UART / SERIAL
@@ -73,7 +73,7 @@ UART / SERIAL
 
 The UART port works fine when an external serial clock is provided
 (like the one on the Ebony board) and when using internal clocking.
-This is controlled with the CFG_EXT_SERIAL_CLOCK flag. When using
+This is controlled with the CONFIG_SYS_EXT_SERIAL_CLOCK flag. When using
 internal clocking, the "ideal baud rate" settings in the 440GP
 user manual are automatically calculated.
 
@@ -94,7 +94,7 @@ cause problems when a probe (read) is performed (for example the
 CDCV850 clock controller at address 0x69 on the ebony board).
 
 To prevent probing certain addresses you can define the
-CFG_I2C_NOPROBES macro in your board-specific header file. When
+CONFIG_SYS_I2C_NOPROBES macro in your board-specific header file. When
 defined, all specified addresses are skipped during a probe.
 The addresses that are skipped will be displayed in the output
 of the iprobe command.
@@ -102,12 +102,12 @@ of the iprobe command.
 For example, to prevent probing address 0x69, define the macro as
 follows:
 
-#define CFG_I2C_NOPROBES {0x69}
+#define CONFIG_SYS_I2C_NOPROBES {0x69}
 
 Similarly, to prevent probing addresses 0x69 and 0x70, define the
 macro a:
 
-#define CFG_I2C_NOPROBES {0x69, 0x70}
+#define CONFIG_SYS_I2C_NOPROBES {0x69, 0x70}
 
 
 DDR SDRAM CONTROLLER
@@ -144,7 +144,7 @@ utilities once you get to the U-Boot command prompt. NOTE: the default
 The cpu-specific code sets up a default pci_controller structure
 that maps in a single PCI I/O space and PCI memory space. The I/O
 space begins at PCI I/O address 0 and the PCI memory space is
-256 MB starting at PCI address CFG_PCI_TARGBASE. After the
+256 MB starting at PCI address CONFIG_SYS_PCI_TARGBASE. After the
 pci_controller structure is initialized, the cpu-specific code will
 call the routine pci_pre_init(). This routine is implemented by
 board-specific code & is where the board can over-ride/extend the
@@ -157,7 +157,7 @@ initialization continues.
 The default 440GP PCI target configuration is minimal -- it assumes that
 the strapping registers are set as necessary. Since the strapping bits
 provide very limited flexibility, you may want to customize the boards
-target configuration. If CFG_PCI_TARGET_INIT is defined, the cpu-specific
+target configuration. If CONFIG_SYS_PCI_TARGET_INIT is defined, the cpu-specific
 code will call the routine pci_target_init() which you must implement
 in your board-specific code.
 
@@ -166,7 +166,7 @@ initializing the subsystem id and subsystem vendor id, and then ensuring
 that the 'enable host configuration' bit in the PCIX0_BRDGOPT2 is set.
 
 The default PCI master initialization maps in 256 MB of pci memory
-starting at PCI address CFG_PCI_MEMBASE. To customize this, define
+starting at PCI address CONFIG_SYS_PCI_MEMBASE. To customize this, define
 PCI_MASTER_INIT. This will call the routine pci_master_init() in your
 board-specific code rather than performing the default master
 initialization.
diff --git a/doc/README.qemu_mips b/doc/README.qemu_mips
index c9ac3f307..2fdd2b03a 100644
--- a/doc/README.qemu_mips
+++ b/doc/README.qemu_mips
@@ -1,7 +1,7 @@
 
 Notes for the Qemu MIPS port
 
-Example usage:
+I) Example usage:
 
 # ln -s u-boot.bin mips_bios.bin
 start it:
@@ -16,3 +16,65 @@ create image:
 # dd of=flash bs=1k conv=notrunc if=u-boot.bin
 start it:
 # qemu-system-mips -M mips -pflash flash -monitor null -nographic
+
+II) How to debug U-Boot
+
+In order to debug U-Boot you need to start qemu with gdb server support (-s)
+and waiting the connection to start the CPU (-S)
+
+# qemu-system-mips -S -s -M mips -pflash flash -monitor null -nographic
+
+in an other console you start gdb
+
+1) Debugging of U-Boot Before Relocation
+
+Before relocation, the addresses in the ELF file can be used without any problems
+buy connecting to the gdb server localhost:1234
+
+# mipsel-unknown-linux-gnu-gdb u-boot
+GNU gdb 6.6
+Copyright (C) 2006 Free Software Foundation, Inc.
+GDB is free software, covered by the GNU General Public License, and you are
+welcome to change it and/or distribute copies of it under certain conditions.
+Type "show copying" to see the conditions.
+There is absolutely no warranty for GDB.  Type "show warranty" for details.
+This GDB was configured as "--host=i486-linux-gnu --target=mipsel-unknown-linux-gnu"...
+(gdb)  target remote localhost:1234
+Remote debugging using localhost:1234
+_start () at start.S:64
+64		RVECENT(reset,0)	/* U-boot entry point */
+Current language:  auto; currently asm
+(gdb)  b board.c:289
+Breakpoint 1 at 0xbfc00cc8: file board.c, line 289.
+(gdb) c
+Continuing.
+
+Breakpoint 1, board_init_f (bootflag=<value optimized out>) at board.c:290
+290		relocate_code (addr_sp, id, addr);
+Current language:  auto; currently c
+(gdb) p/x addr
+$1 = 0x87fa0000
+
+2) Debugging of U-Boot After Relocation
+
+For debugging U-Boot after relocation we need to know the address to which
+U-Boot relocates itself to 0x87fa0000 by default.
+And replace the symbol table to this offset.
+
+(gdb) symbol-file
+Discard symbol table from `/private/u-boot-arm/u-boot'? (y or n) y
+Error in re-setting breakpoint 1:
+No symbol table is loaded.  Use the "file" command.
+No symbol file now.
+(gdb) add-symbol-file u-boot 0x87fa0000
+add symbol table from file "u-boot" at
+	.text_addr = 0x87fa0000
+(y or n) y
+Reading symbols from /private/u-boot-arm/u-boot...done.
+Breakpoint 1 at 0x87fa0cc8: file board.c, line 289.
+(gdb) c
+Continuing.
+
+Program received signal SIGINT, Interrupt.
+0xffffffff87fa0de4 in udelay (usec=<value optimized out>) at time.c:78
+78		while ((tmo - read_c0_count()) < 0x7fffffff)
diff --git a/doc/README.serial_multi b/doc/README.serial_multi
index 40f78159f..ad61d4261 100644
--- a/doc/README.serial_multi
+++ b/doc/README.serial_multi
@@ -35,7 +35,7 @@ just after switching the console:
 	setenv sout serial_scc; setenv baudrate 38400
 
 After that press 'enter' at the SCC console. Note that baudrates <38400
-are not allowed on LWMON with watchdog enabled (see CFG_BAUDRATE_TABLE in
+are not allowed on LWMON with watchdog enabled (see CONFIG_SYS_BAUDRATE_TABLE in
 include/configs/lwmon.h).
 
 
diff --git a/doc/README.sh7785lcr b/doc/README.sh7785lcr
index 077027695..c8d8ccdd2 100644
--- a/doc/README.sh7785lcr
+++ b/doc/README.sh7785lcr
@@ -80,4 +80,3 @@ This command writes MAC address of this board.
 
 i.e)
 => setmac 00:00:87:**:**:**
-
diff --git a/doc/README.sha1 b/doc/README.sha1
index 7992f7fb4..f6cca40d5 100644
--- a/doc/README.sha1
+++ b/doc/README.sha1
@@ -34,7 +34,7 @@ a) cp the new Image on a position in RAM (here 0x300000)
 
 b) Initialize the SHA1 sum in the Image with 0x00
    The SHA1 sum is stored in Flash at:
-			   CFG_MONITOR_BASE + CFG_MONITOR_LEN + SHA1_SUM_POS
+			   CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN + SHA1_SUM_POS
    for the pcs440ep Flash:	 0xfffa0000 +	      0x60000 +        -0x20
 			    = 0xffffffe0
    for the example in RAM:	   0x300000 +	      0x60000 +        -0x20
diff --git a/doc/README.silent b/doc/README.silent
index 677253251..a26e3df0d 100644
--- a/doc/README.silent
+++ b/doc/README.silent
@@ -13,7 +13,7 @@ The following actions are taken if "silent" is set at boot time:
  - When the console devices have been initialized, "stdout" and
    "stderr" are set to "nulldev", so subsequent messages are
    suppressed automatically. Make sure to enable "nulldev" by
-   #defining CFG_DEVICE_NULLDEV in your board config file.
+   #defining CONFIG_SYS_DEVICE_NULLDEV in your board config file.
 
  - When booting a linux kernel, the "bootargs" are fixed up so that
    the argument "console=" will be in the command line, no matter how
diff --git a/doc/README.update b/doc/README.update
new file mode 100644
index 000000000..48f03b780
--- /dev/null
+++ b/doc/README.update
@@ -0,0 +1,90 @@
+Automatic software update from a TFTP server
+============================================
+
+Overview
+--------
+
+This feature allows to automatically store software updates present on a TFTP
+server in NOR Flash. In more detail: a TFTP transfer of a file given in
+environment variable 'updatefile' from server 'serverip' is attempted during
+boot. The update file should be a FIT file, and can contain one or more
+updates. Each update in the update file has an address in NOR Flash where it
+should be placed, updates are also protected with a SHA-1 checksum. If the
+TFTP transfer is successful, the hash of each update is verified, and if the
+verification is positive, the update is stored in Flash.
+
+The auto-update feature is enabled by the CONFIG_UPDATE_TFTP macro:
+
+#define CONFIG_UPDATE_TFTP		1
+
+
+Note that when enabling auto-update, Flash support must be turned on.  Also,
+one must enable FIT and LIBFDT support:
+
+#define CONFIG_FIT		1
+#define CONFIG_OF_LIBFDT	1
+
+The auto-update feature uses the following configuration knobs:
+
+- CONFIG_UPDATE_LOAD_ADDR
+
+  Normally, TFTP transfer of the update file is done to the address specified
+  in environment variable 'loadaddr'. If this variable is not present, the
+  transfer is made to the address given in CONFIG_UPDATE_LOAD_ADDR (0x100000
+  by default).
+
+- CONFIG_UPDATE_TFTP_CNT_MAX
+  CONFIG_UPDATE_TFTP_MSEC_MAX
+
+  These knobs control the timeouts during initial connection to the TFTP
+  server. Since a transfer is attempted during each boot, it is undesirable to
+  have a long delay when a TFTP server is not present.
+  CONFIG_UPDATE_TFTP_MSEC_MAX specifies the number of milliseconds to wait for
+  the server to respond to initial connection, and CONFIG_UPDATE_TFTP_CNT_MAX
+  gives the number of such connection retries. CONFIG_UPDATE_TFTP_CNT_MAX must
+  be non-negative and is 0 by default, CONFIG_UPDATE_TFTP_MSEC_MAX must be
+  positive and is 100 by default.
+
+Since the update file is in FIT format, it is created from an *.its file using
+the mkimage tool. dtc tool with support for binary includes, e.g. in version
+1.2.0 or later, must also be available on the system where the update file is
+to be prepared. Refer to the doc/uImage.FIT/ directory for more details on FIT
+images.
+
+
+Example .its files
+------------------
+
+- doc/uImage.FIT/update_uboot.its
+
+  A simple example that can be used to create an update file for automatically
+  replacing U-Boot image on a system.
+
+  Assuming that an U-Boot image u-boot.bin is present in the current working
+  directory, and that the address given in the 'load' property in the
+  'update_uboot.its' file is where the U-Boot is stored in Flash, the
+  following command will create the actual update file 'update_uboot.itb':
+
+  mkimage -f update_uboot.its update_uboot.itb
+
+  Place 'update_uboot.itb' on a TFTP server, for example as
+  '/tftpboot/update_uboot.itb', and set the 'updatefile' variable
+  appropriately, for example in the U-Boot prompt:
+
+  setenv updatefile /tftpboot/update_uboot.itb
+  saveenv
+
+  Now, when the system boots up and the update TFTP server specified in the
+  'serverip' environment variable is accessible, the new U-Boot image will be
+  automatically stored in Flash.
+
+  NOTE: do make sure that the 'u-boot.bin' image used to create the update
+  file is a good, working image. Also make sure that the address in Flash
+  where the update will be placed is correct. Making mistake here and
+  attempting the auto-update can render the system unusable.
+
+- doc/uImage.FIT/update3.its
+
+  An example containing three updates. It can be used to update Linux kernel,
+  ramdisk and FDT blob stored in Flash. The procedure for preparing the update
+  file is similar to the example above.
diff --git a/doc/uImage.FIT/command_syntax_extensions.txt b/doc/uImage.FIT/command_syntax_extensions.txt
index 6185cd838..002818c22 100644
--- a/doc/uImage.FIT/command_syntax_extensions.txt
+++ b/doc/uImage.FIT/command_syntax_extensions.txt
@@ -160,7 +160,7 @@ Note on current image address
 
 When bootm is called without arguments, the image at current image address is
 booted. The current image address is the address set most recently by a load
-command, etc, and is by default equal to CFG_LOAD_ADDR. For example, consider
+command, etc, and is by default equal to CONFIG_SYS_LOAD_ADDR. For example, consider
 the following commands:
 
 tftp 200000 /tftpboot/kernel
diff --git a/doc/uImage.FIT/multi.its b/doc/uImage.FIT/multi.its
index b9929623b..1d8c2dbf9 100644
--- a/doc/uImage.FIT/multi.its
+++ b/doc/uImage.FIT/multi.its
@@ -56,6 +56,7 @@
 			data = /incbin/("./eldk-4.2-ramdisk");
 			type = "ramdisk";
 			arch = "ppc";
+			os = "linux";
 			compression = "gzip";
 			hash@1 {
 				algo = "sha1";
@@ -67,6 +68,7 @@
 			data = /incbin/("./eldk-3.1-ramdisk");
 			type = "ramdisk";
 			arch = "ppc";
+			os = "linux";
 			compression = "gzip";
 			hash@1 {
 				algo = "crc32";
diff --git a/doc/uImage.FIT/source_file_format.txt b/doc/uImage.FIT/source_file_format.txt
index c1244fbad..157936ed5 100644
--- a/doc/uImage.FIT/source_file_format.txt
+++ b/doc/uImage.FIT/source_file_format.txt
@@ -169,7 +169,7 @@ the '/images' node should have the following layout:
   - os : OS name, mandatory for type="kernel", valid OS names are: "openbsd",
     "netbsd", "freebsd", "4_4bsd", "linux", "svr4", "esix", "solaris", "irix",
     "sco", "dell", "ncr", "lynxos", "vxworks", "psos", "qnx", "u_boot",
-    "rtems", "artos", "unity".
+    "rtems", "unity", "integrity".
   - arch : Architecture name, mandatory for types: "standalone", "kernel",
     "firmware", "ramdisk" and "fdt". Valid architecture names are: "alpha",
     "arm", "i386", "ia64", "mips", "mips64", "ppc", "s390", "sh", "sparc",
diff --git a/doc/uImage.FIT/update3.its b/doc/uImage.FIT/update3.its
new file mode 100644
index 000000000..285cf73b4
--- /dev/null
+++ b/doc/uImage.FIT/update3.its
@@ -0,0 +1,41 @@
+/*
+ * Example Automatic software update file.
+ */
+/ {
+	description = "Automatic software updates: kernel, ramdisk, FDT";
+	#address-cells = <1>;
+
+	images {
+		update@1 {
+			description = "Linux kernel binary";
+			data = /incbin/("./vmlinux.bin.gz");
+			compression = "none";
+			type = "firmware";
+			load = <FF700000>;
+			hash@1 {
+				algo = "sha1";
+			};
+		};
+		update@2 {
+			description = "Ramdisk image";
+			data = /incbin/("./ramdisk_image.gz");
+			compression = "none";
+			type = "firmware";
+			load = <FF8E0000>;
+			hash@1 {
+				algo = "sha1";
+			};
+		};
+
+		update@3 {
+			description = "FDT blob";
+			data = /incbin/("./blob.fdt");
+			compression = "none";
+			type = "firmware";
+			load = <FFAC0000>;
+			hash@1 {
+				algo = "sha1";
+			};
+		};
+	};
+};
diff --git a/doc/uImage.FIT/update_uboot.its b/doc/uImage.FIT/update_uboot.its
new file mode 100644
index 000000000..e0d27eacc
--- /dev/null
+++ b/doc/uImage.FIT/update_uboot.its
@@ -0,0 +1,21 @@
+/*
+ * Automatic software update for U-Boot
+ * Make sure the flashing addresses ('load' prop) is correct for your board!
+ */
+/ {
+	description = "Automatic U-Boot update";
+	#address-cells = <1>;
+
+	images {
+		update@1 {
+			description = "U-Boot binary";
+			data = /incbin/("./u-boot.bin");
+			compression = "none";
+			type = "firmware";
+			load = <FFFC0000>;
+			hash@1 {
+				algo = "sha1";
+			};
+		};
+	};
+};
diff --git a/drivers/bios_emulator/Makefile b/drivers/bios_emulator/Makefile
index 90c64dad6..c73da97b4 100644
--- a/drivers/bios_emulator/Makefile
+++ b/drivers/bios_emulator/Makefile
@@ -6,7 +6,7 @@ X86DIR  = x86emu
 
 $(shell mkdir -p $(obj)$(X86DIR))
 
-COBJS	= atibios.o biosemu.o besys.o bios.o \
+COBJS-$(CONFIG_BIOSEMU)	= atibios.o biosemu.o besys.o bios.o \
 	$(X86DIR)/decode.o \
 	$(X86DIR)/ops2.o \
 	$(X86DIR)/ops.o \
@@ -14,6 +14,7 @@ COBJS	= atibios.o biosemu.o besys.o bios.o \
 	$(X86DIR)/sys.o \
 	$(X86DIR)/debug.o
 
+COBJS	:= $(COBJS-y)
 SRCS	:= $(COBJS:.o=.c)
 OBJS	:= $(addprefix $(obj),$(COBJS))
 
diff --git a/drivers/bios_emulator/atibios.c b/drivers/bios_emulator/atibios.c
index 5779f99f1..d950b1847 100644
--- a/drivers/bios_emulator/atibios.c
+++ b/drivers/bios_emulator/atibios.c
@@ -46,9 +46,6 @@
 *		BIOS in u-boot.
 ****************************************************************************/
 #include <common.h>
-
-#ifdef CONFIG_BIOSEMU
-
 #include "biosemui.h"
 #include <malloc.h>
 
@@ -336,5 +333,3 @@ int BootVideoCardBIOS(pci_dev_t pcidev, BE_VGAInfo ** pVGAInfo, int cleanUp)
 		*pVGAInfo = VGAInfo;
 	return true;
 }
-
-#endif
diff --git a/drivers/bios_emulator/besys.c b/drivers/bios_emulator/besys.c
index cb1b0c1b9..cbc5062ee 100644
--- a/drivers/bios_emulator/besys.c
+++ b/drivers/bios_emulator/besys.c
@@ -48,9 +48,6 @@
 ****************************************************************************/
 
 #include <common.h>
-
-#if defined(CONFIG_BIOSEMU)
-
 #include "biosemui.h"
 
 /*------------------------- Global Variables ------------------------------*/
@@ -721,4 +718,3 @@ void X86API BE_outl(X86EMU_pioAddr port, u32 val)
 #endif
 		LOG_outpd(port, val);
 }
-#endif
diff --git a/drivers/bios_emulator/bios.c b/drivers/bios_emulator/bios.c
index d41511c1d..edda27622 100644
--- a/drivers/bios_emulator/bios.c
+++ b/drivers/bios_emulator/bios.c
@@ -42,9 +42,6 @@
 ****************************************************************************/
 
 #include <common.h>
-
-#if defined(CONFIG_BIOSEMU)
-
 #include "biosemui.h"
 
 /*----------------------------- Implementation ----------------------------*/
@@ -323,4 +320,3 @@ void _BE_bios_init(u32 * intrTab)
 	bios_intr_tab[0x6D] = int10;
 	X86EMU_setupIntrFuncs(bios_intr_tab);
 }
-#endif
diff --git a/drivers/bios_emulator/biosemu.c b/drivers/bios_emulator/biosemu.c
index decdb79a7..d0c652157 100644
--- a/drivers/bios_emulator/biosemu.c
+++ b/drivers/bios_emulator/biosemu.c
@@ -47,9 +47,6 @@
 
 #include <malloc.h>
 #include <common.h>
-
-#if defined(CONFIG_BIOSEMU)
-
 #include "biosemui.h"
 
 BE_sysEnv _BE_env = {{0}};
@@ -372,4 +369,3 @@ int X86API BE_int86x(int intno, RMREGS * in, RMREGS * out, RMSREGS * sregs)
 	sregs->gs = M.x86.R_GS;
 	return out->x.ax;
 }
-#endif
diff --git a/drivers/bios_emulator/x86emu/debug.c b/drivers/bios_emulator/x86emu/debug.c
index 5cbcc9501..241acf3a8 100644
--- a/drivers/bios_emulator/x86emu/debug.c
+++ b/drivers/bios_emulator/x86emu/debug.c
@@ -39,9 +39,6 @@
 
 #include <stdarg.h>
 #include <common.h>
-
-#if defined(CONFIG_BIOSEMU)
-
 #include "x86emu/x86emui.h"
 
 /*----------------------------- Implementation ----------------------------*/
@@ -50,7 +47,7 @@
 
 static void print_encoded_bytes(u16 s, u16 o);
 static void print_decoded_instruction(void);
-static int parse_line(char *s, int *ps, int *n);
+static int x86emu_parse_line(char *s, int *ps, int *n);
 
 /* should look something like debug's output. */
 void X86EMU_trace_regs(void)
@@ -257,7 +254,7 @@ void x86emu_single_step(void)
 	offset = M.x86.saved_ip;
 	while (!done) {
 		printk("-");
-		cmd = parse_line(s, ps, &ntok);
+		cmd = x86emu_parse_line(s, ps, &ntok);
 		switch (cmd) {
 		case 'u':
 			disassemble_forward(M.x86.saved_cs, (u16) offset, 10);
@@ -331,7 +328,7 @@ int X86EMU_trace_off(void)
 	return M.x86.debug &= ~(DEBUG_STEP_F | DEBUG_DECODE_F | DEBUG_TRACE_F);
 }
 
-static int parse_line(char *s, int *ps, int *n)
+static int x86emu_parse_line(char *s, int *ps, int *n)
 {
 	int cmd;
 
@@ -463,5 +460,3 @@ void x86emu_dump_xregs(void)
 		printk("NC ");
 	printk("\n");
 }
-
-#endif
diff --git a/drivers/bios_emulator/x86emu/decode.c b/drivers/bios_emulator/x86emu/decode.c
index 7a9a1ddbf..a782b817b 100644
--- a/drivers/bios_emulator/x86emu/decode.c
+++ b/drivers/bios_emulator/x86emu/decode.c
@@ -37,9 +37,6 @@
 *
 ****************************************************************************/
 #include <common.h>
-
-#if defined(CONFIG_BIOSEMU)
-
 #include "x86emu/x86emui.h"
 
 /*----------------------------- Implementation ----------------------------*/
@@ -1145,5 +1142,3 @@ unsigned decode_rmXX_address(int mod, int rm)
     return decode_rm01_address(rm);
   return decode_rm10_address(rm);
 }
-
-#endif
diff --git a/drivers/bios_emulator/x86emu/ops.c b/drivers/bios_emulator/x86emu/ops.c
index 10f275794..d63c99fd2 100644
--- a/drivers/bios_emulator/x86emu/ops.c
+++ b/drivers/bios_emulator/x86emu/ops.c
@@ -76,9 +76,6 @@
 ****************************************************************************/
 
 #include <common.h>
-
-#if defined(CONFIG_BIOSEMU)
-
 #include "x86emu/x86emui.h"
 
 /*----------------------------- Implementation ----------------------------*/
@@ -5434,5 +5431,3 @@ void (*x86emu_optab[256])(u8) __attribute__ ((section(GOT2_TYPE))) =
 /*  0xfe */ x86emuOp_opcFE_byte_RM,
 /*  0xff */ x86emuOp_opcFF_word_RM,
 };
-
-#endif
diff --git a/drivers/bios_emulator/x86emu/ops2.c b/drivers/bios_emulator/x86emu/ops2.c
index d90d36629..51e20e1c5 100644
--- a/drivers/bios_emulator/x86emu/ops2.c
+++ b/drivers/bios_emulator/x86emu/ops2.c
@@ -45,9 +45,6 @@
 ****************************************************************************/
 
 #include <common.h>
-
-#if defined(CONFIG_BIOSEMU)
-
 #include "x86emu/x86emui.h"
 
 /*----------------------------- Implementation ----------------------------*/
@@ -1772,5 +1769,3 @@ void (*x86emu_optab2[256])(u8) __attribute__((section(GOT2_TYPE))) =
 /*  0xfe */ x86emuOp2_illegal_op,
 /*  0xff */ x86emuOp2_illegal_op,
 };
-
-#endif
diff --git a/drivers/bios_emulator/x86emu/prim_ops.c b/drivers/bios_emulator/x86emu/prim_ops.c
index 2a254a4e6..7553087b2 100644
--- a/drivers/bios_emulator/x86emu/prim_ops.c
+++ b/drivers/bios_emulator/x86emu/prim_ops.c
@@ -100,9 +100,6 @@
 #include <common.h>
 
 #define PRIM_OPS_NO_REDEFINE_ASM
-
-#if defined(CONFIG_BIOSEMU)
-
 #include "x86emu/x86emui.h"
 
 /*------------------------- Global Variables ------------------------------*/
@@ -2448,5 +2445,3 @@ DB( if (CHECK_SP_ACCESS())
     M.x86.R_SP += 4;
     return res;
 }
-
-#endif
diff --git a/drivers/bios_emulator/x86emu/sys.c b/drivers/bios_emulator/x86emu/sys.c
index dd44ff1e7..21f9730be 100644
--- a/drivers/bios_emulator/x86emu/sys.c
+++ b/drivers/bios_emulator/x86emu/sys.c
@@ -40,9 +40,6 @@
 ****************************************************************************/
 
 #include <common.h>
-
-#if defined(CONFIG_BIOSEMU)
-
 #include "x86emu/x86emui.h"
 
 /*------------------------- Global Variables ------------------------------*/
@@ -324,5 +321,3 @@ void X86EMU_prepareForInt(int num)
 	M.x86.R_IP = mem_access_word(num * 4);
 	M.x86.intr = 0;
 }
-
-#endif
diff --git a/drivers/block/ahci.c b/drivers/block/ahci.c
index 52fd1080e..2445e8c62 100644
--- a/drivers/block/ahci.c
+++ b/drivers/block/ahci.c
@@ -676,7 +676,7 @@ void scsi_low_level_init(int busdevfunc)
 
 	linkmap = probe_ent->link_port_map;
 
-	for (i = 0; i < CFG_SCSI_MAX_SCSI_ID; i++) {
+	for (i = 0; i < CONFIG_SYS_SCSI_MAX_SCSI_ID; i++) {
 		if (((linkmap >> i) & 0x01)) {
 			if (ahci_port_start((u8) i)) {
 				printf("Can not start port %d\n", i);
diff --git a/drivers/block/ata_piix.c b/drivers/block/ata_piix.c
index 4c26b36f5..ec3768711 100644
--- a/drivers/block/ata_piix.c
+++ b/drivers/block/ata_piix.c
@@ -35,7 +35,7 @@
 #include <ide.h>
 #include <ata.h>
 
-extern block_dev_desc_t sata_dev_desc[CFG_SATA_MAX_DEVICE];
+extern block_dev_desc_t sata_dev_desc[CONFIG_SYS_SATA_MAX_DEVICE];
 extern int curr_device;
 
 #define DEBUG_SATA 0		/*For debug prints set DEBUG_SATA to 1 */
@@ -173,10 +173,10 @@ init_sata (int dev)
 	    iobase4 | ATA_PCI_CTL_OFS;
 	port[1].ioaddr.bmdma_addr = iobase5 + 0x8;
 
-	for (i = 0; i < CFG_SATA_MAXBUS; i++)
+	for (i = 0; i < CONFIG_SYS_SATA_MAXBUS; i++)
 		sata_port (&port[i].ioaddr);
 
-	for (i = 0; i < CFG_SATA_MAXBUS; i++) {
+	for (i = 0; i < CONFIG_SYS_SATA_MAXBUS; i++) {
 		if (!(sata_bus_probe (i))) {
 			port[i].port_state = 0;
 			printf ("SATA#%d port is not present \n", i);
@@ -190,15 +190,15 @@ init_sata (int dev)
 		}
 	}
 
-	for (i = 0; i < CFG_SATA_MAXBUS; i++) {
+	for (i = 0; i < CONFIG_SYS_SATA_MAXBUS; i++) {
 		u8 j, devno;
 
 		if (port[i].port_state == 0)
 			continue;
-		for (j = 0; j < CFG_SATA_DEVS_PER_BUS; j++) {
+		for (j = 0; j < CONFIG_SYS_SATA_DEVS_PER_BUS; j++) {
 			sata_identify (i, j);
 			set_Feature_cmd (i, j);
-			devno = i * CFG_SATA_DEVS_PER_BUS + j;
+			devno = i * CONFIG_SYS_SATA_DEVS_PER_BUS + j;
 			if ((sata_dev_desc[devno].lba > 0) &&
 			    (sata_dev_desc[devno].blksz > 0)) {
 				dev_print (&sata_dev_desc[devno]);
@@ -206,7 +206,7 @@ init_sata (int dev)
 				init_part (&sata_dev_desc[devno]);
 				if (curr_device < 0)
 					curr_device =
-					    i * CFG_SATA_DEVS_PER_BUS + j;
+					    i * CONFIG_SYS_SATA_DEVS_PER_BUS + j;
 			}
 		}
 	}
@@ -271,7 +271,7 @@ sata_bus_softreset (int num)
 
 	port[num].dev_mask = 0;
 
-	for (i = 0; i < CFG_SATA_DEVS_PER_BUS; i++) {
+	for (i = 0; i < CONFIG_SYS_SATA_DEVS_PER_BUS; i++) {
 		if (!(sata_devchk (&port[num].ioaddr, i))) {
 			PRINTF ("dev_chk failed for dev#%d\n", i);
 		} else {
@@ -328,7 +328,7 @@ sata_bus_softreset (int num)
 void
 sata_identify (int num, int dev)
 {
-	u8 cmd = 0, status = 0, devno = num * CFG_SATA_DEVS_PER_BUS + dev;
+	u8 cmd = 0, status = 0, devno = num * CONFIG_SYS_SATA_DEVS_PER_BUS + dev;
 	u16 iobuf[ATA_SECT_SIZE];
 	u64 n_sectors = 0;
 	u8 mask = 0;
@@ -564,10 +564,10 @@ sata_read (int device, ulong blknr,lbaint_t blkcnt, void * buff)
 	}
 #endif
 	/*Port Number */
-	num = device / CFG_SATA_DEVS_PER_BUS;
+	num = device / CONFIG_SYS_SATA_DEVS_PER_BUS;
 	/*dev on the port */
-	if (device >= CFG_SATA_DEVS_PER_BUS)
-		dev = device - CFG_SATA_DEVS_PER_BUS;
+	if (device >= CONFIG_SYS_SATA_DEVS_PER_BUS)
+		dev = device - CONFIG_SYS_SATA_DEVS_PER_BUS;
 	else
 		dev = device;
 
@@ -671,10 +671,10 @@ sata_write (int device, ulong blknr,lbaint_t blkcnt, void * buff)
 	}
 #endif
 	/*Port Number */
-	num = device / CFG_SATA_DEVS_PER_BUS;
+	num = device / CONFIG_SYS_SATA_DEVS_PER_BUS;
 	/*dev on the Port */
-	if (device >= CFG_SATA_DEVS_PER_BUS)
-		dev = device - CFG_SATA_DEVS_PER_BUS;
+	if (device >= CONFIG_SYS_SATA_DEVS_PER_BUS)
+		dev = device - CONFIG_SYS_SATA_DEVS_PER_BUS;
 	else
 		dev = device;
 
diff --git a/drivers/block/ata_piix.h b/drivers/block/ata_piix.h
index f9f019470..11885af20 100644
--- a/drivers/block/ata_piix.h
+++ b/drivers/block/ata_piix.h
@@ -88,7 +88,7 @@ int init_sata (int dev);
 #endif
 
 #ifdef DRV_DECL			/*Defines Driver Specific variables */
-struct sata_port port[CFG_SATA_MAXBUS];
+struct sata_port port[CONFIG_SYS_SATA_MAXBUS];
 #endif
 
 #endif /* __ATA_PIIX_H__ */
diff --git a/drivers/block/fsl_sata.c b/drivers/block/fsl_sata.c
index 55f593a49..2009d1ecd 100644
--- a/drivers/block/fsl_sata.c
+++ b/drivers/block/fsl_sata.c
@@ -26,23 +26,23 @@
 #include <fis.h>
 #include "fsl_sata.h"
 
-extern block_dev_desc_t sata_dev_desc[CFG_SATA_MAX_DEVICE];
+extern block_dev_desc_t sata_dev_desc[CONFIG_SYS_SATA_MAX_DEVICE];
 
-#ifndef CFG_SATA1_FLAGS
-	#define CFG_SATA1_FLAGS	FLAGS_DMA
+#ifndef CONFIG_SYS_SATA1_FLAGS
+	#define CONFIG_SYS_SATA1_FLAGS	FLAGS_DMA
 #endif
-#ifndef CFG_SATA2_FLAGS
-	#define CFG_SATA2_FLAGS	FLAGS_DMA
+#ifndef CONFIG_SYS_SATA2_FLAGS
+	#define CONFIG_SYS_SATA2_FLAGS	FLAGS_DMA
 #endif
 
 static struct fsl_sata_info fsl_sata_info[] = {
 #ifdef CONFIG_SATA1
-	{CFG_SATA1, CFG_SATA1_FLAGS},
+	{CONFIG_SYS_SATA1, CONFIG_SYS_SATA1_FLAGS},
 #else
 	{0, 0},
 #endif
 #ifdef CONFIG_SATA2
-	{CFG_SATA2, CFG_SATA2_FLAGS},
+	{CONFIG_SYS_SATA2, CONFIG_SYS_SATA2_FLAGS},
 #else
 	{0, 0},
 #endif
@@ -123,7 +123,7 @@ int init_sata(int dev)
 	int i;
 	fsl_sata_t *sata;
 
-	if (dev < 0 || dev > (CFG_SATA_MAX_DEVICE - 1)) {
+	if (dev < 0 || dev > (CONFIG_SYS_SATA_MAX_DEVICE - 1)) {
 		printf("the sata index %d is out of ranges\n\r", dev);
 		return -1;
 	}
diff --git a/drivers/block/sata_sil3114.c b/drivers/block/sata_sil3114.c
index 8399737ff..351cf993c 100644
--- a/drivers/block/sata_sil3114.c
+++ b/drivers/block/sata_sil3114.c
@@ -48,9 +48,9 @@ static u8 sata_chk_status (struct sata_ioports *ioaddr, u8 usealtstatus);
 static void msleep (int count);
 
 static u32 iobase[6] = { 0, 0, 0, 0, 0, 0};	/* PCI BAR registers for device */
-extern block_dev_desc_t sata_dev_desc[CFG_SATA_MAX_DEVICE];
+extern block_dev_desc_t sata_dev_desc[CONFIG_SYS_SATA_MAX_DEVICE];
 
-static struct sata_port port[CFG_SATA_MAX_DEVICE];
+static struct sata_port port[CONFIG_SYS_SATA_MAX_DEVICE];
 
 static void output_data (struct sata_ioports *ioaddr, u16 * sect_buf, int words)
 {
diff --git a/drivers/block/sil680.c b/drivers/block/sil680.c
index 052c3d367..e21fb9b69 100644
--- a/drivers/block/sil680.c
+++ b/drivers/block/sil680.c
@@ -32,25 +32,25 @@
  * #define CONFIG_PCI_PNP
  * NOTE it may also be necessary to define this if the default of 8 is
  * incorrect for the target board (e.g. the sequoia board requires 0).
- * #define CFG_PCI_CACHE_LINE_SIZE	0
+ * #define CONFIG_SYS_PCI_CACHE_LINE_SIZE	0
  *
  * #define CONFIG_CMD_IDE
  * #undef  CONFIG_IDE_8xx_DIRECT
  * #undef  CONFIG_IDE_LED
  * #undef  CONFIG_IDE_RESET
  * #define CONFIG_IDE_PREINIT
- * #define CFG_IDE_MAXBUS		2 - modify to suit
- * #define CFG_IDE_MAXDEVICE	(CFG_IDE_MAXBUS*2) - modify to suit
- * #define CFG_ATA_BASE_ADDR	0
- * #define CFG_ATA_IDE0_OFFSET	0
- * #define CFG_ATA_IDE1_OFFSET	0
- * #define CFG_ATA_DATA_OFFSET	0
- * #define CFG_ATA_REG_OFFSET	0
- * #define CFG_ATA_ALT_OFFSET	0x0004
+ * #define CONFIG_SYS_IDE_MAXBUS		2 - modify to suit
+ * #define CONFIG_SYS_IDE_MAXDEVICE	(CONFIG_SYS_IDE_MAXBUS*2) - modify to suit
+ * #define CONFIG_SYS_ATA_BASE_ADDR	0
+ * #define CONFIG_SYS_ATA_IDE0_OFFSET	0
+ * #define CONFIG_SYS_ATA_IDE1_OFFSET	0
+ * #define CONFIG_SYS_ATA_DATA_OFFSET	0
+ * #define CONFIG_SYS_ATA_REG_OFFSET	0
+ * #define CONFIG_SYS_ATA_ALT_OFFSET	0x0004
  *
  * The mapping for PCI IO-space.
  * NOTE this is the value for the sequoia board. Modify to suit.
- * #define CFG_PCI0_IO_SPACE   0xE8000000
+ * #define CONFIG_SYS_PCI0_IO_SPACE   0xE8000000
  */
 
 #include <common.h>
@@ -58,7 +58,7 @@
 #include <ide.h>
 #include <pci.h>
 
-extern ulong ide_bus_offset[CFG_IDE_MAXBUS];
+extern ulong ide_bus_offset[CONFIG_SYS_IDE_MAXBUS];
 
 int ide_preinit (void)
 {
@@ -67,7 +67,7 @@ int ide_preinit (void)
 	int l;
 
 	status = 1;
-	for (l = 0; l < CFG_IDE_MAXBUS; l++) {
+	for (l = 0; l < CONFIG_SYS_IDE_MAXBUS; l++) {
 		ide_bus_offset[l] = -ATA_STATUS;
 	}
 	devbusfn = pci_find_device (0x1095, 0x0680, 0);
@@ -77,11 +77,11 @@ int ide_preinit (void)
 		pci_read_config_dword (devbusfn, PCI_BASE_ADDRESS_0,
 				       (u32 *) &ide_bus_offset[0]);
 		ide_bus_offset[0] &= 0xfffffff8;
-		ide_bus_offset[0] += CFG_PCI0_IO_SPACE;
+		ide_bus_offset[0] += CONFIG_SYS_PCI0_IO_SPACE;
 		pci_read_config_dword (devbusfn, PCI_BASE_ADDRESS_2,
 				       (u32 *) &ide_bus_offset[1]);
 		ide_bus_offset[1] &= 0xfffffff8;
-		ide_bus_offset[1] += CFG_PCI0_IO_SPACE;
+		ide_bus_offset[1] += CONFIG_SYS_PCI0_IO_SPACE;
 		/* init various things - taken from the Linux driver */
 		/* set PIO mode */
 		pci_write_config_byte(devbusfn, 0x80, 0x00);
diff --git a/drivers/block/sym53c8xx.c b/drivers/block/sym53c8xx.c
index 44e998b55..8094b415a 100644
--- a/drivers/block/sym53c8xx.c
+++ b/drivers/block/sym53c8xx.c
@@ -426,7 +426,7 @@ void scsi_bus_reset(void)
 {
 	unsigned char t;
 	int i;
-	int end = CFG_SCSI_SPIN_UP_TIME*1000;
+	int end = CONFIG_SYS_SCSI_SPIN_UP_TIME*1000;
 
 	t=scsi_read_byte(SCNTL1);
 	scsi_write_byte(SCNTL1,(t | CRST));
@@ -836,10 +836,10 @@ void scsi_chip_init(void)
 	scsi_write_byte(SCNTL0,0xC0); /* full arbitration no start, no message, parity disabled, master */
 	scsi_write_byte(SCNTL1,0x00);
 	scsi_write_byte(SCNTL2,0x00);
-#ifndef CFG_SCSI_SYM53C8XX_CCF    /* config value for none 40 mhz clocks */
+#ifndef CONFIG_SYS_SCSI_SYM53C8XX_CCF    /* config value for none 40 MHz clocks */
 	scsi_write_byte(SCNTL3,0x13); /* synchronous clock 40/4=10MHz, asynchronous 40MHz */
 #else
-	scsi_write_byte(SCNTL3,CFG_SCSI_SYM53C8XX_CCF); /* config value for none 40 mhz clocks */
+	scsi_write_byte(SCNTL3,CONFIG_SYS_SCSI_SYM53C8XX_CCF); /* config value for none 40 MHz clocks */
 #endif
 	scsi_write_byte(SCID,0x47); /* ID=7, enable reselection */
 	scsi_write_byte(SXFER,0x00); /* synchronous transfer period 10MHz, asynchronous */
diff --git a/drivers/block/systemace.c b/drivers/block/systemace.c
index dfaab528b..e8dff0acf 100644
--- a/drivers/block/systemace.c
+++ b/drivers/block/systemace.c
@@ -20,7 +20,7 @@
 
 /*
  * The Xilinx SystemACE chip support is activated by defining
- * CONFIG_SYSTEMACE to turn on support, and CFG_SYSTEMACE_BASE
+ * CONFIG_SYSTEMACE to turn on support, and CONFIG_SYS_SYSTEMACE_BASE
  * to set the base address of the device. This code currently
  * assumes that the chip is connected via a byte-wide bus.
  *
@@ -47,25 +47,25 @@
 /*
  * The ace_readw and writew functions read/write 16bit words, but the
  * offset value is the BYTE offset as most used in the Xilinx
- * datasheet for the SystemACE chip. The CFG_SYSTEMACE_BASE is defined
+ * datasheet for the SystemACE chip. The CONFIG_SYS_SYSTEMACE_BASE is defined
  * to be the base address for the chip, usually in the local
  * peripheral bus.
  */
-#if (CFG_SYSTEMACE_WIDTH == 8)
+#if (CONFIG_SYS_SYSTEMACE_WIDTH == 8)
 #if !defined(__BIG_ENDIAN)
-#define ace_readw(off) ((readb(CFG_SYSTEMACE_BASE+off)<<8) | \
-			(readb(CFG_SYSTEMACE_BASE+off+1)))
-#define ace_writew(val, off) {writeb(val>>8, CFG_SYSTEMACE_BASE+off); \
-			      writeb(val, CFG_SYSTEMACE_BASE+off+1);}
+#define ace_readw(off) ((readb(CONFIG_SYS_SYSTEMACE_BASE+off)<<8) | \
+			(readb(CONFIG_SYS_SYSTEMACE_BASE+off+1)))
+#define ace_writew(val, off) {writeb(val>>8, CONFIG_SYS_SYSTEMACE_BASE+off); \
+			      writeb(val, CONFIG_SYS_SYSTEMACE_BASE+off+1);}
 #else
-#define ace_readw(off) ((readb(CFG_SYSTEMACE_BASE+off)) | \
-			(readb(CFG_SYSTEMACE_BASE+off+1)<<8))
-#define ace_writew(val, off) {writeb(val, CFG_SYSTEMACE_BASE+off); \
-			      writeb(val>>8, CFG_SYSTEMACE_BASE+off+1);}
+#define ace_readw(off) ((readb(CONFIG_SYS_SYSTEMACE_BASE+off)) | \
+			(readb(CONFIG_SYS_SYSTEMACE_BASE+off+1)<<8))
+#define ace_writew(val, off) {writeb(val, CONFIG_SYS_SYSTEMACE_BASE+off); \
+			      writeb(val>>8, CONFIG_SYS_SYSTEMACE_BASE+off+1);}
 #endif
 #else
-#define ace_readw(off) (in16(CFG_SYSTEMACE_BASE+off))
-#define ace_writew(val, off) (out16(CFG_SYSTEMACE_BASE+off,val))
+#define ace_readw(off) (in16(CONFIG_SYS_SYSTEMACE_BASE+off))
+#define ace_writew(val, off) (out16(CONFIG_SYS_SYSTEMACE_BASE+off,val))
 #endif
 
 /* */
@@ -120,7 +120,7 @@ block_dev_desc_t *systemace_get_dev(int dev)
 		/*
 		 * Ensure the correct bus mode (8/16 bits) gets enabled
 		 */
-		ace_writew(CFG_SYSTEMACE_WIDTH == 8 ? 0 : 0x0001, 0);
+		ace_writew(CONFIG_SYS_SYSTEMACE_WIDTH == 8 ? 0 : 0x0001, 0);
 
 		init_part(&systemace_dev);
 
diff --git a/common/ACEX1K.c b/drivers/fpga/ACEX1K.c
index 53677b861..3f7967782 100644
--- a/common/ACEX1K.c
+++ b/drivers/fpga/ACEX1K.c
@@ -44,8 +44,8 @@
 #define CONFIG_FPGA_DELAY()
 #endif
 
-#ifndef CFG_FPGA_WAIT
-#define CFG_FPGA_WAIT CFG_HZ/10		/* 100 ms */
+#ifndef CONFIG_SYS_FPGA_WAIT
+#define CONFIG_SYS_FPGA_WAIT CONFIG_SYS_HZ/10		/* 100 ms */
 #endif
 
 static int ACEX1K_ps_load( Altera_desc *desc, void *buf, size_t bsize );
@@ -154,7 +154,7 @@ static int ACEX1K_ps_load (Altera_desc * desc, void *buf, size_t bsize)
 				"done:\t0x%p\n\n",
 				__FUNCTION__, &fn, fn, fn->config, fn->status,
 				fn->clk, fn->data, fn->done);
-#ifdef CFG_FPGA_PROG_FEEDBACK
+#ifdef CONFIG_SYS_FPGA_PROG_FEEDBACK
 		printf ("Loading FPGA Device %d...", cookie);
 #endif
 
@@ -185,7 +185,7 @@ static int ACEX1K_ps_load (Altera_desc * desc, void *buf, size_t bsize)
 		ts = get_timer (0);		/* get current time */
 		do {
 			CONFIG_FPGA_DELAY ();
-			if (get_timer (ts) > CFG_FPGA_WAIT) {	/* check the time */
+			if (get_timer (ts) > CONFIG_SYS_FPGA_WAIT) {	/* check the time */
 				puts ("** Timeout waiting for STATUS to go high.\n");
 				(*fn->abort) (cookie);
 				return FPGA_FAIL;
@@ -199,7 +199,7 @@ static int ACEX1K_ps_load (Altera_desc * desc, void *buf, size_t bsize)
 		/* Load the data */
 		while (bytecount < bsize) {
 			unsigned char val=0;
-#ifdef CFG_FPGA_CHECK_CTRLC
+#ifdef CONFIG_SYS_FPGA_CHECK_CTRLC
 			if (ctrlc ()) {
 				(*fn->abort) (cookie);
 				return FPGA_FAIL;
@@ -230,7 +230,7 @@ static int ACEX1K_ps_load (Altera_desc * desc, void *buf, size_t bsize)
 				i --;
 			} while (i > 0);
 
-#ifdef CFG_FPGA_PROG_FEEDBACK
+#ifdef CONFIG_SYS_FPGA_PROG_FEEDBACK
 			if (bytecount % (bsize / 40) == 0)
 				putc ('.');		/* let them know we are alive */
 #endif
@@ -238,7 +238,7 @@ static int ACEX1K_ps_load (Altera_desc * desc, void *buf, size_t bsize)
 
 		CONFIG_FPGA_DELAY ();
 
-#ifdef CFG_FPGA_PROG_FEEDBACK
+#ifdef CONFIG_SYS_FPGA_PROG_FEEDBACK
 		putc (' ');			/* terminate the dotted line */
 #endif
 
@@ -265,7 +265,7 @@ static int ACEX1K_ps_load (Altera_desc * desc, void *buf, size_t bsize)
 
 	ret_val = FPGA_SUCCESS;
 
-#ifdef CFG_FPGA_PROG_FEEDBACK
+#ifdef CONFIG_SYS_FPGA_PROG_FEEDBACK
 		if (ret_val == FPGA_SUCCESS) {
 			puts ("Done.\n");
 		}
diff --git a/drivers/fpga/Makefile b/drivers/fpga/Makefile
new file mode 100644
index 000000000..52d8e2432
--- /dev/null
+++ b/drivers/fpga/Makefile
@@ -0,0 +1,58 @@
+#
+# (C) Copyright 2008
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	:= $(obj)libfpga.a
+
+ifdef CONFIG_FPGA
+COBJS-y += fpga.o
+COBJS-$(CONFIG_FPGA_SPARTAN2) += spartan2.o
+COBJS-$(CONFIG_FPGA_SPARTAN3) += spartan3.o
+COBJS-$(CONFIG_FPGA_VIRTEX2) += virtex2.o
+COBJS-$(CONFIG_FPGA_XILINX) += xilinx.o
+ifdef CONFIG_FPGA_ALTERA
+COBJS-y += altera.o
+COBJS-$(CONFIG_FPGA_ACEX1K) += ACEX1K.o
+COBJS-$(CONFIG_FPGA_CYCLON2) += cyclon2.o
+COBJS-$(CONFIG_FPGA_STRATIX_II) += stratixII.o
+endif
+endif
+
+COBJS	:= $(COBJS-y)
+SRCS	:= $(COBJS:.o=.c)
+OBJS	:= $(addprefix $(obj),$(COBJS))
+
+all:	$(LIB)
+
+$(LIB):	$(obj).depend $(OBJS)
+	$(AR) $(ARFLAGS) $@ $(OBJS)
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/common/altera.c b/drivers/fpga/altera.c
index 09dc0b22e..09dc0b22e 100644
--- a/common/altera.c
+++ b/drivers/fpga/altera.c
diff --git a/common/cyclon2.c b/drivers/fpga/cyclon2.c
index 479bebbe4..3ed64b279 100644
--- a/common/cyclon2.c
+++ b/drivers/fpga/cyclon2.c
@@ -43,8 +43,8 @@
 #define CONFIG_FPGA_DELAY()
 #endif
 
-#ifndef CFG_FPGA_WAIT
-#define CFG_FPGA_WAIT CFG_HZ/10		/* 100 ms */
+#ifndef CONFIG_SYS_FPGA_WAIT
+#define CONFIG_SYS_FPGA_WAIT CONFIG_SYS_HZ/10		/* 100 ms */
 #endif
 
 static int CYC2_ps_load( Altera_desc *desc, void *buf, size_t bsize );
@@ -147,7 +147,7 @@ static int CYC2_ps_load (Altera_desc * desc, void *buf, size_t bsize)
 				"done:\t0x%p\n\n",
 				__FUNCTION__, &fn, fn, fn->config, fn->status,
 				fn->write, fn->done);
-#ifdef CFG_FPGA_PROG_FEEDBACK
+#ifdef CONFIG_SYS_FPGA_PROG_FEEDBACK
 		printf ("Loading FPGA Device %d...", cookie);
 #endif
 
@@ -167,7 +167,7 @@ static int CYC2_ps_load (Altera_desc * desc, void *buf, size_t bsize)
 		ts = get_timer (0);		/* get current time */
 		do {
 			CONFIG_FPGA_DELAY ();
-			if (get_timer (ts) > CFG_FPGA_WAIT) {	/* check the time */
+			if (get_timer (ts) > CONFIG_SYS_FPGA_WAIT) {	/* check the time */
 				puts ("** Timeout waiting for STATUS to go high.\n");
 				(*fn->abort) (cookie);
 				return FPGA_FAIL;
@@ -183,13 +183,13 @@ static int CYC2_ps_load (Altera_desc * desc, void *buf, size_t bsize)
 			(*fn->abort) (cookie);
 			return FPGA_FAIL;
 		}
-#ifdef CFG_FPGA_PROG_FEEDBACK
+#ifdef CONFIG_SYS_FPGA_PROG_FEEDBACK
 		puts(" OK? ...");
 #endif
 
 		CONFIG_FPGA_DELAY ();
 
-#ifdef CFG_FPGA_PROG_FEEDBACK
+#ifdef CONFIG_SYS_FPGA_PROG_FEEDBACK
 		putc (' ');			/* terminate the dotted line */
 #endif
 
@@ -202,13 +202,13 @@ static int CYC2_ps_load (Altera_desc * desc, void *buf, size_t bsize)
 		(*fn->abort) (cookie);
 		return (FPGA_FAIL);
 	}
-#ifdef CFG_FPGA_PROG_FEEDBACK
+#ifdef CONFIG_SYS_FPGA_PROG_FEEDBACK
 	puts(" OK\n");
 #endif
 
 	ret_val = FPGA_SUCCESS;
 
-#ifdef CFG_FPGA_PROG_FEEDBACK
+#ifdef CONFIG_SYS_FPGA_PROG_FEEDBACK
 	if (ret_val == FPGA_SUCCESS) {
 		puts ("Done.\n");
 	}
diff --git a/common/fpga.c b/drivers/fpga/fpga.c
index 67a6c300c..67a6c300c 100644
--- a/common/fpga.c
+++ b/drivers/fpga/fpga.c
diff --git a/common/spartan2.c b/drivers/fpga/spartan2.c
index ebac388b1..f5ba7fc04 100644
--- a/common/spartan2.c
+++ b/drivers/fpga/spartan2.c
@@ -32,8 +32,8 @@
 #define PRINTF(fmt,args...)
 #endif
 
-#undef CFG_FPGA_CHECK_BUSY
-#undef CFG_FPGA_PROG_FEEDBACK
+#undef CONFIG_SYS_FPGA_CHECK_BUSY
+#undef CONFIG_SYS_FPGA_PROG_FEEDBACK
 
 /* Note: The assumption is that we cannot possibly run fast enough to
  * overrun the device (the Slave Parallel mode can free run at 50MHz).
@@ -44,8 +44,8 @@
 #define CONFIG_FPGA_DELAY()
 #endif
 
-#ifndef CFG_FPGA_WAIT
-#define CFG_FPGA_WAIT CFG_HZ/100	/* 10 ms */
+#ifndef CONFIG_SYS_FPGA_WAIT
+#define CONFIG_SYS_FPGA_WAIT CONFIG_SYS_HZ/100	/* 10 ms */
 #endif
 
 static int Spartan2_sp_load( Xilinx_desc *desc, void *buf, size_t bsize );
@@ -180,7 +180,7 @@ static int Spartan2_sp_load (Xilinx_desc * desc, void *buf, size_t bsize)
 		 * Continuous Data Loading in Slave Parallel Mode for
 		 * the Spartan-II Family.
 		 */
-#ifdef CFG_FPGA_PROG_FEEDBACK
+#ifdef CONFIG_SYS_FPGA_PROG_FEEDBACK
 		printf ("Loading FPGA Device %d...\n", cookie);
 #endif
 		/*
@@ -201,7 +201,7 @@ static int Spartan2_sp_load (Xilinx_desc * desc, void *buf, size_t bsize)
 		/* Now wait for INIT and BUSY to go high */
 		do {
 			CONFIG_FPGA_DELAY ();
-			if (get_timer (ts) > CFG_FPGA_WAIT) {	/* check the time */
+			if (get_timer (ts) > CONFIG_SYS_FPGA_WAIT) {	/* check the time */
 				puts ("** Timeout waiting for INIT to clear.\n");
 				(*fn->abort) (cookie);	/* abort the burn */
 				return FPGA_FAIL;
@@ -223,7 +223,7 @@ static int Spartan2_sp_load (Xilinx_desc * desc, void *buf, size_t bsize)
 			CONFIG_FPGA_DELAY ();
 			(*fn->clk) (TRUE, TRUE, cookie);	/* Assert the clock pin */
 
-#ifdef CFG_FPGA_CHECK_BUSY
+#ifdef CONFIG_SYS_FPGA_CHECK_BUSY
 			ts = get_timer (0);	/* get current time */
 			while ((*fn->busy) (cookie)) {
 				/* XXX - we should have a check in here somewhere to
@@ -234,7 +234,7 @@ static int Spartan2_sp_load (Xilinx_desc * desc, void *buf, size_t bsize)
 				CONFIG_FPGA_DELAY ();
 				(*fn->clk) (TRUE, TRUE, cookie);	/* Assert the clock pin */
 
-				if (get_timer (ts) > CFG_FPGA_WAIT) {	/* check the time */
+				if (get_timer (ts) > CONFIG_SYS_FPGA_WAIT) {	/* check the time */
 					puts ("** Timeout waiting for BUSY to clear.\n");
 					(*fn->abort) (cookie);	/* abort the burn */
 					return FPGA_FAIL;
@@ -242,7 +242,7 @@ static int Spartan2_sp_load (Xilinx_desc * desc, void *buf, size_t bsize)
 			}
 #endif
 
-#ifdef CFG_FPGA_PROG_FEEDBACK
+#ifdef CONFIG_SYS_FPGA_PROG_FEEDBACK
 			if (bytecount % (bsize / 40) == 0)
 				putc ('.');		/* let them know we are alive */
 #endif
@@ -252,7 +252,7 @@ static int Spartan2_sp_load (Xilinx_desc * desc, void *buf, size_t bsize)
 		(*fn->cs) (FALSE, TRUE, cookie);	/* Deassert the chip select */
 		(*fn->wr) (FALSE, TRUE, cookie);	/* Deassert the write pin */
 
-#ifdef CFG_FPGA_PROG_FEEDBACK
+#ifdef CONFIG_SYS_FPGA_PROG_FEEDBACK
 		putc ('\n');			/* terminate the dotted line */
 #endif
 
@@ -268,7 +268,7 @@ static int Spartan2_sp_load (Xilinx_desc * desc, void *buf, size_t bsize)
 			CONFIG_FPGA_DELAY ();
 			(*fn->clk) (TRUE, TRUE, cookie);	/* Assert the clock pin */
 
-			if (get_timer (ts) > CFG_FPGA_WAIT) {	/* check the time */
+			if (get_timer (ts) > CONFIG_SYS_FPGA_WAIT) {	/* check the time */
 				puts ("** Timeout waiting for DONE to clear.\n");
 				(*fn->abort) (cookie);	/* abort the burn */
 				ret_val = FPGA_FAIL;
@@ -277,7 +277,7 @@ static int Spartan2_sp_load (Xilinx_desc * desc, void *buf, size_t bsize)
 		}
 
 		if (ret_val == FPGA_SUCCESS) {
-#ifdef CFG_FPGA_PROG_FEEDBACK
+#ifdef CONFIG_SYS_FPGA_PROG_FEEDBACK
 			puts ("Done.\n");
 #endif
 		}
@@ -289,7 +289,7 @@ static int Spartan2_sp_load (Xilinx_desc * desc, void *buf, size_t bsize)
 		}
 
 		else {
-#ifdef CFG_FPGA_PROG_FEEDBACK
+#ifdef CONFIG_SYS_FPGA_PROG_FEEDBACK
 			puts ("Fail.\n");
 #endif
 		}
@@ -323,7 +323,7 @@ static int Spartan2_sp_dump (Xilinx_desc * desc, void *buf, size_t bsize)
 			(*fn->clk) (FALSE, TRUE, cookie);	/* Deassert the clock pin */
 			(*fn->clk) (TRUE, TRUE, cookie);	/* Assert the clock pin */
 			(*fn->rdata) (&(data[bytecount++]), cookie);	/* read the data */
-#ifdef CFG_FPGA_PROG_FEEDBACK
+#ifdef CONFIG_SYS_FPGA_PROG_FEEDBACK
 			if (bytecount % (bsize / 40) == 0)
 				putc ('.');		/* let them know we are alive */
 #endif
@@ -333,7 +333,7 @@ static int Spartan2_sp_dump (Xilinx_desc * desc, void *buf, size_t bsize)
 		(*fn->clk) (FALSE, TRUE, cookie);	/* Deassert the clock pin */
 		(*fn->clk) (TRUE, TRUE, cookie);	/* Assert the clock pin */
 
-#ifdef CFG_FPGA_PROG_FEEDBACK
+#ifdef CONFIG_SYS_FPGA_PROG_FEEDBACK
 		putc ('\n');			/* terminate the dotted line */
 #endif
 		puts ("Done.\n");
@@ -460,7 +460,7 @@ static int Spartan2_ss_load (Xilinx_desc * desc, void *buf, size_t bsize)
 				"done:\t0x%p\n\n",
 				__FUNCTION__, &fn, fn, fn->pgm, fn->init,
 				fn->clk, fn->wr, fn->done);
-#ifdef CFG_FPGA_PROG_FEEDBACK
+#ifdef CONFIG_SYS_FPGA_PROG_FEEDBACK
 		printf ("Loading FPGA Device %d...\n", cookie);
 #endif
 
@@ -478,7 +478,7 @@ static int Spartan2_ss_load (Xilinx_desc * desc, void *buf, size_t bsize)
 		ts = get_timer (0);		/* get current time */
 		do {
 			CONFIG_FPGA_DELAY ();
-			if (get_timer (ts) > CFG_FPGA_WAIT) {	/* check the time */
+			if (get_timer (ts) > CONFIG_SYS_FPGA_WAIT) {	/* check the time */
 				puts ("** Timeout waiting for INIT to start.\n");
 				return FPGA_FAIL;
 			}
@@ -492,7 +492,7 @@ static int Spartan2_ss_load (Xilinx_desc * desc, void *buf, size_t bsize)
 		/* Now wait for INIT to go high */
 		do {
 			CONFIG_FPGA_DELAY ();
-			if (get_timer (ts) > CFG_FPGA_WAIT) {	/* check the time */
+			if (get_timer (ts) > CONFIG_SYS_FPGA_WAIT) {	/* check the time */
 				puts ("** Timeout waiting for INIT to clear.\n");
 				return FPGA_FAIL;
 			}
@@ -523,7 +523,7 @@ static int Spartan2_ss_load (Xilinx_desc * desc, void *buf, size_t bsize)
 				i --;
 			} while (i > 0);
 
-#ifdef CFG_FPGA_PROG_FEEDBACK
+#ifdef CONFIG_SYS_FPGA_PROG_FEEDBACK
 			if (bytecount % (bsize / 40) == 0)
 				putc ('.');		/* let them know we are alive */
 #endif
@@ -531,7 +531,7 @@ static int Spartan2_ss_load (Xilinx_desc * desc, void *buf, size_t bsize)
 
 		CONFIG_FPGA_DELAY ();
 
-#ifdef CFG_FPGA_PROG_FEEDBACK
+#ifdef CONFIG_SYS_FPGA_PROG_FEEDBACK
 		putc ('\n');			/* terminate the dotted line */
 #endif
 
@@ -551,7 +551,7 @@ static int Spartan2_ss_load (Xilinx_desc * desc, void *buf, size_t bsize)
 
 			putc ('*');
 
-			if (get_timer (ts) > CFG_FPGA_WAIT) {	/* check the time */
+			if (get_timer (ts) > CONFIG_SYS_FPGA_WAIT) {	/* check the time */
 				puts ("** Timeout waiting for DONE to clear.\n");
 				ret_val = FPGA_FAIL;
 				break;
@@ -566,7 +566,7 @@ static int Spartan2_ss_load (Xilinx_desc * desc, void *buf, size_t bsize)
 			(*fn->post) (cookie);
 		}
 
-#ifdef CFG_FPGA_PROG_FEEDBACK
+#ifdef CONFIG_SYS_FPGA_PROG_FEEDBACK
 		if (ret_val == FPGA_SUCCESS) {
 			puts ("Done.\n");
 		}
diff --git a/common/spartan3.c b/drivers/fpga/spartan3.c
index 8f1ab80b7..9ce41f1d2 100644
--- a/common/spartan3.c
+++ b/drivers/fpga/spartan3.c
@@ -37,8 +37,8 @@
 #define PRINTF(fmt,args...)
 #endif
 
-#undef CFG_FPGA_CHECK_BUSY
-#undef CFG_FPGA_PROG_FEEDBACK
+#undef CONFIG_SYS_FPGA_CHECK_BUSY
+#undef CONFIG_SYS_FPGA_PROG_FEEDBACK
 
 /* Note: The assumption is that we cannot possibly run fast enough to
  * overrun the device (the Slave Parallel mode can free run at 50MHz).
@@ -49,8 +49,8 @@
 #define CONFIG_FPGA_DELAY()
 #endif
 
-#ifndef CFG_FPGA_WAIT
-#define CFG_FPGA_WAIT CFG_HZ/100	/* 10 ms */
+#ifndef CONFIG_SYS_FPGA_WAIT
+#define CONFIG_SYS_FPGA_WAIT CONFIG_SYS_HZ/100	/* 10 ms */
 #endif
 
 static int Spartan3_sp_load( Xilinx_desc *desc, void *buf, size_t bsize );
@@ -185,7 +185,7 @@ static int Spartan3_sp_load (Xilinx_desc * desc, void *buf, size_t bsize)
 		 * Continuous Data Loading in Slave Parallel Mode for
 		 * the Spartan-II Family.
 		 */
-#ifdef CFG_FPGA_PROG_FEEDBACK
+#ifdef CONFIG_SYS_FPGA_PROG_FEEDBACK
 		printf ("Loading FPGA Device %d...\n", cookie);
 #endif
 		/*
@@ -206,7 +206,7 @@ static int Spartan3_sp_load (Xilinx_desc * desc, void *buf, size_t bsize)
 		/* Now wait for INIT and BUSY to go high */
 		do {
 			CONFIG_FPGA_DELAY ();
-			if (get_timer (ts) > CFG_FPGA_WAIT) {	/* check the time */
+			if (get_timer (ts) > CONFIG_SYS_FPGA_WAIT) {	/* check the time */
 				puts ("** Timeout waiting for INIT to clear.\n");
 				(*fn->abort) (cookie);	/* abort the burn */
 				return FPGA_FAIL;
@@ -228,7 +228,7 @@ static int Spartan3_sp_load (Xilinx_desc * desc, void *buf, size_t bsize)
 			CONFIG_FPGA_DELAY ();
 			(*fn->clk) (TRUE, TRUE, cookie);	/* Assert the clock pin */
 
-#ifdef CFG_FPGA_CHECK_BUSY
+#ifdef CONFIG_SYS_FPGA_CHECK_BUSY
 			ts = get_timer (0);	/* get current time */
 			while ((*fn->busy) (cookie)) {
 				/* XXX - we should have a check in here somewhere to
@@ -239,7 +239,7 @@ static int Spartan3_sp_load (Xilinx_desc * desc, void *buf, size_t bsize)
 				CONFIG_FPGA_DELAY ();
 				(*fn->clk) (TRUE, TRUE, cookie);	/* Assert the clock pin */
 
-				if (get_timer (ts) > CFG_FPGA_WAIT) {	/* check the time */
+				if (get_timer (ts) > CONFIG_SYS_FPGA_WAIT) {	/* check the time */
 					puts ("** Timeout waiting for BUSY to clear.\n");
 					(*fn->abort) (cookie);	/* abort the burn */
 					return FPGA_FAIL;
@@ -247,7 +247,7 @@ static int Spartan3_sp_load (Xilinx_desc * desc, void *buf, size_t bsize)
 			}
 #endif
 
-#ifdef CFG_FPGA_PROG_FEEDBACK
+#ifdef CONFIG_SYS_FPGA_PROG_FEEDBACK
 			if (bytecount % (bsize / 40) == 0)
 				putc ('.');		/* let them know we are alive */
 #endif
@@ -257,7 +257,7 @@ static int Spartan3_sp_load (Xilinx_desc * desc, void *buf, size_t bsize)
 		(*fn->cs) (FALSE, TRUE, cookie);	/* Deassert the chip select */
 		(*fn->wr) (FALSE, TRUE, cookie);	/* Deassert the write pin */
 
-#ifdef CFG_FPGA_PROG_FEEDBACK
+#ifdef CONFIG_SYS_FPGA_PROG_FEEDBACK
 		putc ('\n');			/* terminate the dotted line */
 #endif
 
@@ -273,7 +273,7 @@ static int Spartan3_sp_load (Xilinx_desc * desc, void *buf, size_t bsize)
 			CONFIG_FPGA_DELAY ();
 			(*fn->clk) (TRUE, TRUE, cookie);	/* Assert the clock pin */
 
-			if (get_timer (ts) > CFG_FPGA_WAIT) {	/* check the time */
+			if (get_timer (ts) > CONFIG_SYS_FPGA_WAIT) {	/* check the time */
 				puts ("** Timeout waiting for DONE to clear.\n");
 				(*fn->abort) (cookie);	/* abort the burn */
 				ret_val = FPGA_FAIL;
@@ -282,7 +282,7 @@ static int Spartan3_sp_load (Xilinx_desc * desc, void *buf, size_t bsize)
 		}
 
 		if (ret_val == FPGA_SUCCESS) {
-#ifdef CFG_FPGA_PROG_FEEDBACK
+#ifdef CONFIG_SYS_FPGA_PROG_FEEDBACK
 			puts ("Done.\n");
 #endif
 		}
@@ -294,7 +294,7 @@ static int Spartan3_sp_load (Xilinx_desc * desc, void *buf, size_t bsize)
 		}
 
 		else {
-#ifdef CFG_FPGA_PROG_FEEDBACK
+#ifdef CONFIG_SYS_FPGA_PROG_FEEDBACK
 			puts ("Fail.\n");
 #endif
 		}
@@ -328,7 +328,7 @@ static int Spartan3_sp_dump (Xilinx_desc * desc, void *buf, size_t bsize)
 			(*fn->clk) (FALSE, TRUE, cookie);	/* Deassert the clock pin */
 			(*fn->clk) (TRUE, TRUE, cookie);	/* Assert the clock pin */
 			(*fn->rdata) (&(data[bytecount++]), cookie);	/* read the data */
-#ifdef CFG_FPGA_PROG_FEEDBACK
+#ifdef CONFIG_SYS_FPGA_PROG_FEEDBACK
 			if (bytecount % (bsize / 40) == 0)
 				putc ('.');		/* let them know we are alive */
 #endif
@@ -338,7 +338,7 @@ static int Spartan3_sp_dump (Xilinx_desc * desc, void *buf, size_t bsize)
 		(*fn->clk) (FALSE, TRUE, cookie);	/* Deassert the clock pin */
 		(*fn->clk) (TRUE, TRUE, cookie);	/* Assert the clock pin */
 
-#ifdef CFG_FPGA_PROG_FEEDBACK
+#ifdef CONFIG_SYS_FPGA_PROG_FEEDBACK
 		putc ('\n');			/* terminate the dotted line */
 #endif
 		puts ("Done.\n");
@@ -465,7 +465,7 @@ static int Spartan3_ss_load (Xilinx_desc * desc, void *buf, size_t bsize)
 				"done:\t0x%p\n\n",
 				__FUNCTION__, &fn, fn, fn->pgm, fn->init,
 				fn->clk, fn->wr, fn->done);
-#ifdef CFG_FPGA_PROG_FEEDBACK
+#ifdef CONFIG_SYS_FPGA_PROG_FEEDBACK
 		printf ("Loading FPGA Device %d...\n", cookie);
 #endif
 
@@ -483,7 +483,7 @@ static int Spartan3_ss_load (Xilinx_desc * desc, void *buf, size_t bsize)
 		ts = get_timer (0);		/* get current time */
 		do {
 			CONFIG_FPGA_DELAY ();
-			if (get_timer (ts) > CFG_FPGA_WAIT) {	/* check the time */
+			if (get_timer (ts) > CONFIG_SYS_FPGA_WAIT) {	/* check the time */
 				puts ("** Timeout waiting for INIT to start.\n");
 				return FPGA_FAIL;
 			}
@@ -497,7 +497,7 @@ static int Spartan3_ss_load (Xilinx_desc * desc, void *buf, size_t bsize)
 		/* Now wait for INIT to go high */
 		do {
 			CONFIG_FPGA_DELAY ();
-			if (get_timer (ts) > CFG_FPGA_WAIT) {	/* check the time */
+			if (get_timer (ts) > CONFIG_SYS_FPGA_WAIT) {	/* check the time */
 				puts ("** Timeout waiting for INIT to clear.\n");
 				return FPGA_FAIL;
 			}
@@ -528,7 +528,7 @@ static int Spartan3_ss_load (Xilinx_desc * desc, void *buf, size_t bsize)
 				i --;
 			} while (i > 0);
 
-#ifdef CFG_FPGA_PROG_FEEDBACK
+#ifdef CONFIG_SYS_FPGA_PROG_FEEDBACK
 			if (bytecount % (bsize / 40) == 0)
 				putc ('.');		/* let them know we are alive */
 #endif
@@ -536,7 +536,7 @@ static int Spartan3_ss_load (Xilinx_desc * desc, void *buf, size_t bsize)
 
 		CONFIG_FPGA_DELAY ();
 
-#ifdef CFG_FPGA_PROG_FEEDBACK
+#ifdef CONFIG_SYS_FPGA_PROG_FEEDBACK
 		putc ('\n');			/* terminate the dotted line */
 #endif
 
@@ -556,7 +556,7 @@ static int Spartan3_ss_load (Xilinx_desc * desc, void *buf, size_t bsize)
 
 			putc ('*');
 
-			if (get_timer (ts) > CFG_FPGA_WAIT) {	/* check the time */
+			if (get_timer (ts) > CONFIG_SYS_FPGA_WAIT) {	/* check the time */
 				puts ("** Timeout waiting for DONE to clear.\n");
 				ret_val = FPGA_FAIL;
 				break;
@@ -571,7 +571,7 @@ static int Spartan3_ss_load (Xilinx_desc * desc, void *buf, size_t bsize)
 			(*fn->post) (cookie);
 		}
 
-#ifdef CFG_FPGA_PROG_FEEDBACK
+#ifdef CONFIG_SYS_FPGA_PROG_FEEDBACK
 		if (ret_val == FPGA_SUCCESS) {
 			puts ("Done.\n");
 		}
diff --git a/common/stratixII.c b/drivers/fpga/stratixII.c
index 7556dbfb3..7556dbfb3 100644
--- a/common/stratixII.c
+++ b/drivers/fpga/stratixII.c
diff --git a/common/virtex2.c b/drivers/fpga/virtex2.c
index 52da1b2ca..50d092184 100644
--- a/common/virtex2.c
+++ b/drivers/fpga/virtex2.c
@@ -43,34 +43,34 @@
 
 /*
  * If the SelectMap interface can be overrun by the processor, define
- * CFG_FPGA_CHECK_BUSY and/or CONFIG_FPGA_DELAY in the board configuration
+ * CONFIG_SYS_FPGA_CHECK_BUSY and/or CONFIG_FPGA_DELAY in the board configuration
  * file and add board-specific support for checking BUSY status. By default,
  * assume that the SelectMap interface cannot be overrun.
  */
-#ifndef CFG_FPGA_CHECK_BUSY
-#undef CFG_FPGA_CHECK_BUSY
+#ifndef CONFIG_SYS_FPGA_CHECK_BUSY
+#undef CONFIG_SYS_FPGA_CHECK_BUSY
 #endif
 
 #ifndef CONFIG_FPGA_DELAY
 #define CONFIG_FPGA_DELAY()
 #endif
 
-#ifndef CFG_FPGA_PROG_FEEDBACK
-#define CFG_FPGA_PROG_FEEDBACK
+#ifndef CONFIG_SYS_FPGA_PROG_FEEDBACK
+#define CONFIG_SYS_FPGA_PROG_FEEDBACK
 #endif
 
 /*
  * Don't allow config cycle to be interrupted
  */
-#ifndef CFG_FPGA_CHECK_CTRLC
-#undef CFG_FPGA_CHECK_CTRLC
+#ifndef CONFIG_SYS_FPGA_CHECK_CTRLC
+#undef CONFIG_SYS_FPGA_CHECK_CTRLC
 #endif
 
 /*
  * Check for errors during configuration by default
  */
-#ifndef CFG_FPGA_CHECK_ERROR
-#define CFG_FPGA_CHECK_ERROR
+#ifndef CONFIG_SYS_FPGA_CHECK_ERROR
+#define CONFIG_SYS_FPGA_CHECK_ERROR
 #endif
 
 /*
@@ -81,8 +81,8 @@
  * which yields 11.44 mS.  So let's make it bigger in order to handle
  * an XC2V1000, if anyone can ever get ahold of one.
  */
-#ifndef CFG_FPGA_WAIT_INIT
-#define CFG_FPGA_WAIT_INIT	CFG_HZ/2	/* 500 ms */
+#ifndef CONFIG_SYS_FPGA_WAIT_INIT
+#define CONFIG_SYS_FPGA_WAIT_INIT	CONFIG_SYS_HZ/2	/* 500 ms */
 #endif
 
 /*
@@ -90,15 +90,15 @@
  * This is normally not necessary since for most reasonable configuration
  * clock frequencies (i.e. 66 MHz or less), BUSY monitoring is unnecessary.
  */
-#ifndef CFG_FPGA_WAIT_BUSY
-#define CFG_FPGA_WAIT_BUSY	CFG_HZ/200	/* 5 ms*/
+#ifndef CONFIG_SYS_FPGA_WAIT_BUSY
+#define CONFIG_SYS_FPGA_WAIT_BUSY	CONFIG_SYS_HZ/200	/* 5 ms*/
 #endif
 
 /* Default timeout for waiting for FPGA to enter operational mode after
  * configuration data has been written.
  */
-#ifndef	CFG_FPGA_WAIT_CONFIG
-#define CFG_FPGA_WAIT_CONFIG	CFG_HZ/5	/* 200 ms */
+#ifndef	CONFIG_SYS_FPGA_WAIT_CONFIG
+#define CONFIG_SYS_FPGA_WAIT_CONFIG	CONFIG_SYS_HZ/5	/* 200 ms */
 #endif
 
 static int Virtex2_ssm_load (Xilinx_desc * desc, void *buf, size_t bsize);
@@ -232,7 +232,7 @@ static int Virtex2_ssm_load (Xilinx_desc * desc, void *buf, size_t bsize)
 				fn->clk, fn->cs, fn->wr, fn->rdata, fn->wdata,
 				fn->busy, fn->abort, fn->post);
 
-#ifdef CFG_FPGA_PROG_FEEDBACK
+#ifdef CONFIG_SYS_FPGA_PROG_FEEDBACK
 		printf ("Initializing FPGA Device %d...\n", cookie);
 #endif
 		/*
@@ -252,10 +252,10 @@ static int Virtex2_ssm_load (Xilinx_desc * desc, void *buf, size_t bsize)
 		udelay (10);
 		ts = get_timer (0);
 		do {
-			if (get_timer (ts) > CFG_FPGA_WAIT_INIT) {
+			if (get_timer (ts) > CONFIG_SYS_FPGA_WAIT_INIT) {
 				printf ("%s:%d: ** Timeout after %d ticks waiting for INIT"
 						" to assert.\n", __FUNCTION__, __LINE__,
-						CFG_FPGA_WAIT_INIT);
+						CONFIG_SYS_FPGA_WAIT_INIT);
 				(*fn->abort) (cookie);
 				return FPGA_FAIL;
 			}
@@ -271,10 +271,10 @@ static int Virtex2_ssm_load (Xilinx_desc * desc, void *buf, size_t bsize)
 		ts = get_timer (0);
 		do {
 			CONFIG_FPGA_DELAY ();
-			if (get_timer (ts) > CFG_FPGA_WAIT_INIT) {
+			if (get_timer (ts) > CONFIG_SYS_FPGA_WAIT_INIT) {
 				printf ("%s:%d: ** Timeout after %d ticks waiting for INIT"
 						" to deassert.\n", __FUNCTION__, __LINE__,
-						CFG_FPGA_WAIT_INIT);
+						CONFIG_SYS_FPGA_WAIT_INIT);
 				(*fn->abort) (cookie);
 				return FPGA_FAIL;
 			}
@@ -289,7 +289,7 @@ static int Virtex2_ssm_load (Xilinx_desc * desc, void *buf, size_t bsize)
 		 * Load the data byte by byte
 		 */
 		while (bytecount < bsize) {
-#ifdef CFG_FPGA_CHECK_CTRLC
+#ifdef CONFIG_SYS_FPGA_CHECK_CTRLC
 			if (ctrlc ()) {
 				(*fn->abort) (cookie);
 				return FPGA_FAIL;
@@ -302,7 +302,7 @@ static int Virtex2_ssm_load (Xilinx_desc * desc, void *buf, size_t bsize)
 			    break;
 			}
 
-#ifdef CFG_FPGA_CHECK_ERROR
+#ifdef CONFIG_SYS_FPGA_CHECK_ERROR
 			if ((*fn->init) (cookie)) {
 				printf ("\n%s:%d:  ** Error: INIT asserted during"
 						" configuration\n", __FUNCTION__, __LINE__);
@@ -323,20 +323,20 @@ static int Virtex2_ssm_load (Xilinx_desc * desc, void *buf, size_t bsize)
 			CONFIG_FPGA_DELAY ();
 			(*fn->clk) (TRUE, TRUE, cookie);
 
-#ifdef CFG_FPGA_CHECK_BUSY
+#ifdef CONFIG_SYS_FPGA_CHECK_BUSY
 			ts = get_timer (0);
 			while ((*fn->busy) (cookie)) {
-				if (get_timer (ts) > CFG_FPGA_WAIT_BUSY) {
+				if (get_timer (ts) > CONFIG_SYS_FPGA_WAIT_BUSY) {
 					printf ("%s:%d: ** Timeout after %d ticks waiting for"
 							" BUSY to deassert\n",
-							__FUNCTION__, __LINE__, CFG_FPGA_WAIT_BUSY);
+							__FUNCTION__, __LINE__, CONFIG_SYS_FPGA_WAIT_BUSY);
 					(*fn->abort) (cookie);
 					return FPGA_FAIL;
 				}
 			}
 #endif
 
-#ifdef CFG_FPGA_PROG_FEEDBACK
+#ifdef CONFIG_SYS_FPGA_PROG_FEEDBACK
 			if (bytecount % (bsize / 40) == 0)
 				putc ('.');
 #endif
@@ -349,7 +349,7 @@ static int Virtex2_ssm_load (Xilinx_desc * desc, void *buf, size_t bsize)
 		(*fn->cs) (FALSE, TRUE, cookie);
 		(*fn->wr) (FALSE, TRUE, cookie);
 
-#ifdef CFG_FPGA_PROG_FEEDBACK
+#ifdef CONFIG_SYS_FPGA_PROG_FEEDBACK
 		putc ('\n');
 #endif
 
@@ -360,10 +360,10 @@ static int Virtex2_ssm_load (Xilinx_desc * desc, void *buf, size_t bsize)
 		ts = get_timer (0);
 		ret_val = FPGA_SUCCESS;
 		while (((*fn->done) (cookie) == FPGA_FAIL) || (*fn->init) (cookie)) {
-			if (get_timer (ts) > CFG_FPGA_WAIT_CONFIG) {
+			if (get_timer (ts) > CONFIG_SYS_FPGA_WAIT_CONFIG) {
 				printf ("%s:%d: ** Timeout after %d ticks waiting for DONE to"
 						"assert and INIT to deassert\n",
-						__FUNCTION__, __LINE__, CFG_FPGA_WAIT_CONFIG);
+						__FUNCTION__, __LINE__, CONFIG_SYS_FPGA_WAIT_CONFIG);
 				(*fn->abort) (cookie);
 				ret_val = FPGA_FAIL;
 				break;
@@ -371,7 +371,7 @@ static int Virtex2_ssm_load (Xilinx_desc * desc, void *buf, size_t bsize)
 		}
 
 		if (ret_val == FPGA_SUCCESS) {
-#ifdef CFG_FPGA_PROG_FEEDBACK
+#ifdef CONFIG_SYS_FPGA_PROG_FEEDBACK
 			printf ("Initialization of FPGA device %d complete\n", cookie);
 #endif
 			/*
@@ -381,7 +381,7 @@ static int Virtex2_ssm_load (Xilinx_desc * desc, void *buf, size_t bsize)
 				(*fn->post) (cookie);
 			}
 		} else {
-#ifdef CFG_FPGA_PROG_FEEDBACK
+#ifdef CONFIG_SYS_FPGA_PROG_FEEDBACK
 			printf ("** Initialization of FPGA device %d FAILED\n",
 					cookie);
 #endif
@@ -412,7 +412,7 @@ static int Virtex2_ssm_dump (Xilinx_desc * desc, void *buf, size_t bsize)
 		(*fn->clk) (TRUE, TRUE, cookie);
 
 		while (bytecount < bsize) {
-#ifdef CFG_FPGA_CHECK_CTRLC
+#ifdef CONFIG_SYS_FPGA_CHECK_CTRLC
 			if (ctrlc ()) {
 				(*fn->abort) (cookie);
 				return FPGA_FAIL;
@@ -424,7 +424,7 @@ static int Virtex2_ssm_dump (Xilinx_desc * desc, void *buf, size_t bsize)
 			(*fn->clk) (FALSE, TRUE, cookie);
 			(*fn->clk) (TRUE, TRUE, cookie);
 			(*fn->rdata) (&(data[bytecount++]), cookie);
-#ifdef CFG_FPGA_PROG_FEEDBACK
+#ifdef CONFIG_SYS_FPGA_PROG_FEEDBACK
 			if (bytecount % (bsize / 40) == 0)
 				putc ('.');
 #endif
@@ -437,7 +437,7 @@ static int Virtex2_ssm_dump (Xilinx_desc * desc, void *buf, size_t bsize)
 		(*fn->clk) (FALSE, TRUE, cookie);
 		(*fn->clk) (TRUE, TRUE, cookie);
 
-#ifdef CFG_FPGA_PROG_FEEDBACK
+#ifdef CONFIG_SYS_FPGA_PROG_FEEDBACK
 		putc ('\n');
 #endif
 		puts ("Done.\n");
diff --git a/common/xilinx.c b/drivers/fpga/xilinx.c
index 7b5e8c5bb..7b5e8c5bb 100644
--- a/common/xilinx.c
+++ b/drivers/fpga/xilinx.c
diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
index 7f7d3dbcf..59302fa4d 100644
--- a/drivers/hwmon/Makefile
+++ b/drivers/hwmon/Makefile
@@ -35,6 +35,7 @@ COBJS-$(CONFIG_DTT_ADT7460) += adt7460.o
 COBJS-$(CONFIG_DTT_DS1621) += ds1621.o
 COBJS-$(CONFIG_DTT_DS1722) += ds1722.o
 COBJS-$(CONFIG_DTT_DS1775) += ds1775.o
+COBJS-$(CONFIG_DTT_LM63) += lm63.o
 COBJS-$(CONFIG_DTT_LM73) += lm73.o
 COBJS-$(CONFIG_DTT_LM75) += lm75.o
 COBJS-$(CONFIG_DTT_LM81) += lm81.o
diff --git a/drivers/hwmon/adm1021.c b/drivers/hwmon/adm1021.c
index b791ec041..d753e9a72 100644
--- a/drivers/hwmon/adm1021.c
+++ b/drivers/hwmon/adm1021.c
@@ -81,7 +81,7 @@ typedef
 	}
 dtt_cfg_t;
 
-dtt_cfg_t dttcfg[] = CFG_DTT_ADM1021;
+dtt_cfg_t dttcfg[] = CONFIG_SYS_DTT_ADM1021;
 
 int
 dtt_read (int sensor, int reg)
@@ -174,7 +174,7 @@ dtt_init (void)
 	const char *const header = "DTT:   ";
 
 	/* switch to correct I2C bus */
-	I2C_SET_BUS(CFG_DTT_BUS_NUM);
+	I2C_SET_BUS(CONFIG_SYS_DTT_BUS_NUM);
 
 	for (i = 0; i < sizeof(sensors); i++) {
 		if (_dtt_init(sensors[i]) != 0)
diff --git a/drivers/hwmon/ds1621.c b/drivers/hwmon/ds1621.c
index 749aa2691..d15a082df 100644
--- a/drivers/hwmon/ds1621.c
+++ b/drivers/hwmon/ds1621.c
@@ -26,11 +26,6 @@
  */
 
 #include <common.h>
-
-#if !defined(CFG_EEPROM_PAGE_WRITE_ENABLE) || \
-	(CFG_EEPROM_PAGE_WRITE_BITS < 1)
-# error "CFG_EEPROM_PAGE_WRITE_ENABLE must be defined and CFG_EEPROM_PAGE_WRITE_BITS must be greater than 1 to use CONFIG_DTT_DS1621"
-#endif
 #include <i2c.h>
 #include <dtt.h>
 
@@ -130,7 +125,7 @@ static int _dtt_init(int sensor)
     /*
      * Setup High Temp.
      */
-    val = ((CFG_DTT_MAX_TEMP * 2) << 7) & 0xff80;
+    val = ((CONFIG_SYS_DTT_MAX_TEMP * 2) << 7) & 0xff80;
     if (dtt_write(sensor, DTT_TEMP_HIGH, val) != 0)
 	return 1;
     udelay(50000);				/* Max 50ms */
@@ -138,7 +133,7 @@ static int _dtt_init(int sensor)
     /*
      * Setup Low Temp - hysteresis.
      */
-    val = (((CFG_DTT_MAX_TEMP - CFG_DTT_HYSTERESIS) * 2) << 7) & 0xff80;
+    val = (((CONFIG_SYS_DTT_MAX_TEMP - CONFIG_SYS_DTT_HYSTERESIS) * 2) << 7) & 0xff80;
     if (dtt_write(sensor, DTT_TEMP_LOW, val) != 0)
 	return 1;
     udelay(50000);				/* Max 50ms */
diff --git a/drivers/hwmon/ds1775.c b/drivers/hwmon/ds1775.c
index 6a4d8e56d..80fb26f7b 100644
--- a/drivers/hwmon/ds1775.c
+++ b/drivers/hwmon/ds1775.c
@@ -24,7 +24,7 @@
 #include <i2c.h>
 #include <dtt.h>
 
-#define DTT_I2C_DEV_CODE	CFG_I2C_DTT_ADDR /* Dallas Semi's DS1775 device code */
+#define DTT_I2C_DEV_CODE	CONFIG_SYS_I2C_DTT_ADDR /* Dallas Semi's DS1775 device code */
 #define DTT_READ_TEMP		0x0
 #define DTT_CONFIG		0x1
 #define DTT_TEMP_HYST		0x2
@@ -105,7 +105,7 @@ static int _dtt_init(int sensor)
 	/*
 	 * Setup High Temp
 	 */
-	val = ((CFG_DTT_MAX_TEMP * 2) << 7) & 0xff80;
+	val = ((CONFIG_SYS_DTT_MAX_TEMP * 2) << 7) & 0xff80;
 	if (dtt_write(sensor, DTT_TEMP_OS, val) != 0)
 		return 1;
 	udelay(50000);			/* Max 50ms */
@@ -113,7 +113,7 @@ static int _dtt_init(int sensor)
 	/*
 	 * Setup Low Temp - hysteresis
 	 */
-	val = (((CFG_DTT_MAX_TEMP - CFG_DTT_HYSTERESIS) * 2) << 7) & 0xff80;
+	val = (((CONFIG_SYS_DTT_MAX_TEMP - CONFIG_SYS_DTT_HYSTERESIS) * 2) << 7) & 0xff80;
 	if (dtt_write(sensor, DTT_TEMP_HYST, val) != 0)
 		return 1;
 	udelay(50000);			/* Max 50ms */
diff --git a/drivers/hwmon/lm63.c b/drivers/hwmon/lm63.c
new file mode 100644
index 000000000..03616e183
--- /dev/null
+++ b/drivers/hwmon/lm63.c
@@ -0,0 +1,174 @@
+/*
+ * (C) Copyright 2007-2008
+ * Dirk Eibach,  Guntermann & Drunck GmbH, eibach@gdsys.de
+ * based on lm75.c by Bill Hunter
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * National LM63 Temperature Sensor
+ */
+
+#include <common.h>
+#include <i2c.h>
+#include <dtt.h>
+
+#define DTT_I2C_DEV_CODE 0x4C	/* National LM63 device */
+
+#define DTT_READ_TEMP_RMT_MSB	0x01
+#define DTT_CONFIG		0x03
+#define DTT_READ_TEMP_RMT_LSB	0x10
+#define DTT_TACHLIM_LSB		0x48
+#define DTT_TACHLIM_MSB		0x49
+#define DTT_FAN_CONFIG		0x4A
+#define DTT_PWM_FREQ		0x4D
+#define DTT_PWM_LOOKUP_BASE	0x50
+
+struct pwm_lookup_entry {
+	u8 temp;
+	u8 pwm;
+};
+
+/*
+ * Device code
+ */
+
+int dtt_read(int sensor, int reg)
+{
+	int dlen;
+	uchar data[2];
+
+	/*
+	 * Calculate sensor address and register.
+	 */
+	sensor = DTT_I2C_DEV_CODE;	/* address of lm63 is not adjustable */
+
+	dlen = 1;
+
+	/*
+	 * Now try to read the register.
+	 */
+	if (i2c_read(sensor, reg, 1, data, dlen) != 0)
+		return -1;
+
+	return (int)data[0];
+}				/* dtt_read() */
+
+int dtt_write(int sensor, int reg, int val)
+{
+	int dlen;
+	uchar data[2];
+
+	/*
+	 * Calculate sensor address and register.
+	 */
+	sensor = DTT_I2C_DEV_CODE;	/* address of lm63 is not adjustable */
+
+	dlen = 1;
+	data[0] = (char)(val & 0xff);
+
+	/*
+	 * Write value to register.
+	 */
+	if (i2c_write(sensor, reg, 1, data, dlen) != 0)
+		return 1;
+
+	return 0;
+}				/* dtt_write() */
+
+static int _dtt_init(int sensor)
+{
+	int i;
+	int val;
+
+	struct pwm_lookup_entry pwm_lookup[] = CONFIG_DTT_PWM_LOOKUPTABLE;
+
+	/*
+	 * Set PWM Frequency to 2.5% resolution
+	 */
+	val = 20;
+	if (dtt_write(sensor, DTT_PWM_FREQ, val) != 0)
+		return 1;
+
+	/*
+	 * Set Tachometer Limit
+	 */
+	val = CONFIG_DTT_TACH_LIMIT;
+	if (dtt_write(sensor, DTT_TACHLIM_LSB, val & 0xff) != 0)
+		return 1;
+	if (dtt_write(sensor, DTT_TACHLIM_MSB, (val >> 8) & 0xff) != 0)
+		return 1;
+
+	/*
+	 * Setup PWM Lookup-Table
+	 */
+	for (i = 0; i < sizeof(pwm_lookup) / sizeof(struct pwm_lookup_entry);
+	     i++) {
+		int address = DTT_PWM_LOOKUP_BASE + 2 * i;
+		val = pwm_lookup[i].temp;
+		if (dtt_write(sensor, address, val) != 0)
+			return 1;
+		val = pwm_lookup[i].pwm;
+		if (dtt_write(sensor, address + 1, val) != 0)
+			return 1;
+	}
+
+	/*
+	 * Enable PWM Lookup-Table, PWM Clock 360 kHz, Tachometer Mode 2
+	 */
+	val = 0x02;
+	if (dtt_write(sensor, DTT_FAN_CONFIG, val) != 0)
+		return 1;
+
+	/*
+	 * Enable Tach input
+	 */
+	val = dtt_read(sensor, DTT_CONFIG) | 0x04;
+	if (dtt_write(sensor, DTT_CONFIG, val) != 0)
+		return 1;
+
+	return 0;
+}
+
+int dtt_get_temp(int sensor)
+{
+	s16 temp = (dtt_read(sensor, DTT_READ_TEMP_RMT_MSB) << 8)
+	    | (dtt_read(sensor, DTT_READ_TEMP_RMT_LSB));
+
+	/* Ignore LSB for now, U-Boot only prints natural numbers */
+	return temp >> 8;
+}
+
+int dtt_init(void)
+{
+	int i;
+	unsigned char sensors[] = CONFIG_DTT_SENSORS;
+	const char *const header = "DTT:   ";
+
+	for (i = 0; i < sizeof(sensors); i++) {
+		if (_dtt_init(sensors[i]) != 0)
+			printf("%s%d FAILED INIT\n", header, i + 1);
+		else
+			printf("%s%d is %i C\n", header, i + 1,
+			       dtt_get_temp(sensors[i]));
+	}
+
+	return 0;
+}
diff --git a/drivers/hwmon/lm73.c b/drivers/hwmon/lm73.c
index dd2468353..7b5d893ff 100644
--- a/drivers/hwmon/lm73.c
+++ b/drivers/hwmon/lm73.c
@@ -124,11 +124,11 @@ static int _dtt_init(int const sensor)
 	/*
 	 * Setup THIGH (upper-limit) and TLOW (lower-limit) registers
 	 */
-	val = CFG_DTT_MAX_TEMP << 7;
+	val = CONFIG_SYS_DTT_MAX_TEMP << 7;
 	if (dtt_write(sensor, DTT_TEMP_HIGH, val))
 		return -1;
 
-	val = CFG_DTT_MIN_TEMP << 7;
+	val = CONFIG_SYS_DTT_MIN_TEMP << 7;
 	if (dtt_write(sensor, DTT_TEMP_LOW, val))
 		return -1;
 	/*
diff --git a/drivers/hwmon/lm75.c b/drivers/hwmon/lm75.c
index 8051cb228..81198215f 100644
--- a/drivers/hwmon/lm75.c
+++ b/drivers/hwmon/lm75.c
@@ -26,19 +26,17 @@
  */
 
 #include <common.h>
-
-#if !defined(CFG_EEPROM_PAGE_WRITE_ENABLE) || \
-	(CFG_EEPROM_PAGE_WRITE_BITS < 1)
-# error "CFG_EEPROM_PAGE_WRITE_ENABLE must be defined and CFG_EEPROM_PAGE_WRITE_BITS must be greater than  1 to use CONFIG_DTT_LM75"
-#endif
-
 #include <i2c.h>
 #include <dtt.h>
 
 /*
  * Device code
  */
+#if defined(CONFIG_SYS_I2C_DTT_ADDR)
+#define DTT_I2C_DEV_CODE CONFIG_SYS_I2C_DTT_ADDR
+#else
 #define DTT_I2C_DEV_CODE 0x48			/* ON Semi's LM75 device */
+#endif
 #define DTT_READ_TEMP		0x0
 #define DTT_CONFIG		0x1
 #define DTT_TEMP_HYST		0x2
@@ -46,159 +44,141 @@
 
 int dtt_read(int sensor, int reg)
 {
-    int dlen;
-    uchar data[2];
+	int dlen;
+	uchar data[2];
 
 #ifdef CONFIG_DTT_AD7414
-    /*
-     * On AD7414 the first value upon bootup is not read correctly.
-     * This is most likely because of the 800ms update time of the
-     * temp register in normal update mode. To get current values
-     * each time we issue the "dtt" command including upon powerup
-     * we switch into one-short mode.
-     *
-     * Issue one-shot mode command
-     */
-    dtt_write(sensor, DTT_CONFIG, 0x64);
+	/*
+	 * On AD7414 the first value upon bootup is not read correctly.
+	 * This is most likely because of the 800ms update time of the
+	 * temp register in normal update mode. To get current values
+	 * each time we issue the "dtt" command including upon powerup
+	 * we switch into one-short mode.
+	 *
+	 * Issue one-shot mode command
+	 */
+	dtt_write(sensor, DTT_CONFIG, 0x64);
 #endif
 
-    /*
-     * Validate 'reg' param
-     */
-    if((reg < 0) || (reg > 3))
-	return -1;
-
-    /*
-     * Calculate sensor address and register.
-     */
-    sensor = DTT_I2C_DEV_CODE + (sensor & 0x07); /* calculate address of lm75 */
-
-    /*
-     * Prepare to handle 2 byte result.
-     */
-    if ((reg == DTT_READ_TEMP) ||
-	(reg == DTT_TEMP_HYST) ||
-	(reg == DTT_TEMP_SET))
-	dlen = 2;
-    else
-	dlen = 1;
-
-    /*
-     * Now try to read the register.
-     */
-    if (i2c_read(sensor, reg, 1, data, dlen) != 0)
-	return -1;
-
-    /*
-     * Handle 2 byte result.
-     */
-    if (dlen == 2)
-	return ((int)((short)data[1] + (((short)data[0]) << 8)));
-
-
-    return (int)data[0];
+	/* Validate 'reg' param */
+	if((reg < 0) || (reg > 3))
+		return -1;
+
+	/* Calculate sensor address and register. */
+	sensor = DTT_I2C_DEV_CODE + (sensor & 0x07);
+
+	/* Prepare to handle 2 byte result. */
+	if ((reg == DTT_READ_TEMP) ||
+		(reg == DTT_TEMP_HYST) ||
+		(reg == DTT_TEMP_SET))
+			dlen = 2;
+	else
+		dlen = 1;
+
+	/* Now try to read the register. */
+	if (i2c_read(sensor, reg, 1, data, dlen) != 0)
+		return -1;
+
+	/* Handle 2 byte result. */
+	if (dlen == 2)
+		return ((int)((short)data[1] + (((short)data[0]) << 8)));
+
+	return (int)data[0];
 } /* dtt_read() */
 
 
 int dtt_write(int sensor, int reg, int val)
 {
-    int dlen;
-    uchar data[2];
-
-    /*
-     * Validate 'reg' param
-     */
-    if ((reg < 0) || (reg > 3))
-	return 1;
-
-    /*
-     * Calculate sensor address and register.
-     */
-    sensor = DTT_I2C_DEV_CODE + (sensor & 0x07); /* calculate address of lm75 */
-
-    /*
-     * Handle 2 byte values.
-     */
-    if ((reg == DTT_READ_TEMP) ||
-	(reg == DTT_TEMP_HYST) ||
-	(reg == DTT_TEMP_SET)) {
-	dlen = 2;
-	data[0] = (char)((val >> 8) & 0xff);	/* MSB first */
-	data[1] = (char)(val & 0xff);
-    } else {
-	dlen = 1;
-	data[0] = (char)(val & 0xff);
-    }
-
-    /*
-     * Write value to register.
-     */
-    if (i2c_write(sensor, reg, 1, data, dlen) != 0)
-	return 1;
-
-    return 0;
+	int dlen;
+	uchar data[2];
+
+	/* Validate 'reg' param */
+	if ((reg < 0) || (reg > 3))
+		return 1;
+
+	/* Calculate sensor address and register. */
+	sensor = DTT_I2C_DEV_CODE + (sensor & 0x07);
+
+	/* Handle 2 byte values. */
+	if ((reg == DTT_READ_TEMP) ||
+		(reg == DTT_TEMP_HYST) ||
+		(reg == DTT_TEMP_SET)) {
+			dlen = 2;
+		data[0] = (char)((val >> 8) & 0xff);	/* MSB first */
+		data[1] = (char)(val & 0xff);
+	} else {
+		dlen = 1;
+		data[0] = (char)(val & 0xff);
+	}
+
+	/* Write value to register. */
+	if (i2c_write(sensor, reg, 1, data, dlen) != 0)
+		return 1;
+
+	return 0;
 } /* dtt_write() */
 
 
 static int _dtt_init(int sensor)
 {
-    int val;
-
-    /*
-     * Setup TSET ( trip point ) register
-     */
-    val = ((CFG_DTT_MAX_TEMP * 2) << 7) & 0xff80; /* trip */
-    if (dtt_write(sensor, DTT_TEMP_SET, val) != 0)
-	return 1;
-
-    /*
-     * Setup THYST ( untrip point ) register - Hysteresis
-     */
-    val = (((CFG_DTT_MAX_TEMP - CFG_DTT_HYSTERESIS) * 2) << 7) & 0xff80;
-    if (dtt_write(sensor, DTT_TEMP_HYST, val) != 0)
-	return 1;
-
-    /*
-     * Setup configuraton register
-     */
+	int val;
+
+	/* Setup TSET ( trip point ) register */
+	val = ((CONFIG_SYS_DTT_MAX_TEMP * 2) << 7) & 0xff80; /* trip */
+	if (dtt_write(sensor, DTT_TEMP_SET, val) != 0)
+		return 1;
+
+	/* Setup THYST ( untrip point ) register - Hysteresis */
+	val = (((CONFIG_SYS_DTT_MAX_TEMP - CONFIG_SYS_DTT_HYSTERESIS) * 2) << 7) & 0xff80;
+	if (dtt_write(sensor, DTT_TEMP_HYST, val) != 0)
+		return 1;
+
+	/* Setup configuraton register */
 #ifdef CONFIG_DTT_AD7414
-    /* config = alert active low and disabled */
-    val = 0x60;
+	/* config = alert active low and disabled */
+	val = 0x60;
 #else
-    /* config = 6 sample integration, int mode, active low, and enable */
-    val = 0x18;
+	/* config = 6 sample integration, int mode, active low, and enable */
+	val = 0x18;
 #endif
-    if (dtt_write(sensor, DTT_CONFIG, val) != 0)
-	return 1;
+	if (dtt_write(sensor, DTT_CONFIG, val) != 0)
+		return 1;
 
-    return 0;
+	return 0;
 } /* _dtt_init() */
 
 
 int dtt_init (void)
 {
-    int i;
-    unsigned char sensors[] = CONFIG_DTT_SENSORS;
-    const char *const header = "DTT:   ";
+	int i;
+	unsigned char sensors[] = CONFIG_DTT_SENSORS;
+	const char *const header = "DTT:   ";
+	int old_bus;
 
-    for (i = 0; i < sizeof(sensors); i++) {
+	/* switch to correct I2C bus */
+	old_bus = I2C_GET_BUS();
+	I2C_SET_BUS(CONFIG_SYS_DTT_BUS_NUM);
+
+	for (i = 0; i < sizeof(sensors); i++) {
 	if (_dtt_init(sensors[i]) != 0)
-	    printf("%s%d FAILED INIT\n", header, i+1);
+		printf("%s%d FAILED INIT\n", header, i+1);
 	else
-	    printf("%s%d is %i C\n", header, i+1,
-		   dtt_get_temp(sensors[i]));
-    }
+		printf("%s%d is %i C\n", header, i+1,
+		dtt_get_temp(sensors[i]));
+	}
+	/* switch back to original I2C bus */
+	I2C_SET_BUS(old_bus);
 
-    return (0);
+	return (0);
 } /* dtt_init() */
 
 int dtt_get_temp(int sensor)
 {
-    int const ret = dtt_read(sensor, DTT_READ_TEMP);
+	int const ret = dtt_read(sensor, DTT_READ_TEMP);
 
-    if (ret < 0) {
-	printf("DTT temperature read failed.\n");
-	return 0;
-    }
-    return (int)((int16_t) ret / 256);
+	if (ret < 0) {
+		printf("DTT temperature read failed.\n");
+		return 0;
+	}
+	return (int)((int16_t) ret / 256);
 } /* dtt_get_temp() */
diff --git a/drivers/hwmon/lm81.c b/drivers/hwmon/lm81.c
index 9349eb6ff..668ee9fb0 100644
--- a/drivers/hwmon/lm81.c
+++ b/drivers/hwmon/lm81.c
@@ -31,12 +31,6 @@
  */
 
 #include <common.h>
-
-#if !defined(CFG_EEPROM_PAGE_WRITE_ENABLE) || \
-	(CFG_EEPROM_PAGE_WRITE_BITS < 1)
-# error "CFG_EEPROM_PAGE_WRITE_ENABLE must be defined and CFG_EEPROM_PAGE_WRITE_BITS must be greater than  1 to use CONFIG_DTT_LM81"
-#endif
-
 #include <i2c.h>
 #include <dtt.h>
 
diff --git a/drivers/i2c/fsl_i2c.c b/drivers/i2c/fsl_i2c.c
index 264553dfa..ce646fd7e 100644
--- a/drivers/i2c/fsl_i2c.c
+++ b/drivers/i2c/fsl_i2c.c
@@ -26,7 +26,7 @@
 #include <asm/io.h>
 #include <asm/fsl_i2c.h>	/* HW definitions */
 
-#define I2C_TIMEOUT	(CFG_HZ / 4)
+#define I2C_TIMEOUT	(CONFIG_SYS_HZ / 4)
 
 #define I2C_READ_BIT  1
 #define I2C_WRITE_BIT 0
@@ -38,18 +38,17 @@ DECLARE_GLOBAL_DATA_PTR;
  * runs from ROM, and we can't switch buses because we can't modify
  * the global variables.
  */
-#ifdef CFG_SPD_BUS_NUM
-static unsigned int i2c_bus_num __attribute__ ((section ("data"))) = CFG_SPD_BUS_NUM;
-#else
-static unsigned int i2c_bus_num __attribute__ ((section ("data"))) = 0;
+#ifndef CONFIG_SYS_SPD_BUS_NUM
+#define CONFIG_SYS_SPD_BUS_NUM 0
 #endif
+static unsigned int i2c_bus_num __attribute__ ((section (".data"))) = CONFIG_SYS_SPD_BUS_NUM;
 
-static unsigned int i2c_bus_speed[2] = {CFG_I2C_SPEED, CFG_I2C_SPEED};
+static unsigned int i2c_bus_speed[2] = {CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SPEED};
 
 static const struct fsl_i2c *i2c_dev[2] = {
-	(struct fsl_i2c *) (CFG_IMMR + CFG_I2C_OFFSET),
-#ifdef CFG_I2C2_OFFSET
-	(struct fsl_i2c *) (CFG_IMMR + CFG_I2C2_OFFSET)
+	(struct fsl_i2c *) (CONFIG_SYS_IMMR + CONFIG_SYS_I2C_OFFSET),
+#ifdef CONFIG_SYS_I2C2_OFFSET
+	(struct fsl_i2c *) (CONFIG_SYS_IMMR + CONFIG_SYS_I2C2_OFFSET)
 #endif
 };
 
@@ -176,7 +175,7 @@ i2c_init(int speed, int slaveadd)
 	struct fsl_i2c *dev;
 	unsigned int temp;
 
-	dev = (struct fsl_i2c *) (CFG_IMMR + CFG_I2C_OFFSET);
+	dev = (struct fsl_i2c *) (CONFIG_SYS_IMMR + CONFIG_SYS_I2C_OFFSET);
 
 	writeb(0, &dev->cr);			/* stop I2C controller */
 	udelay(5);				/* let it shutdown in peace */
@@ -187,8 +186,8 @@ i2c_init(int speed, int slaveadd)
 	writeb(0x0, &dev->sr);			/* clear status register */
 	writeb(I2C_CR_MEN, &dev->cr);		/* start I2C controller */
 
-#ifdef	CFG_I2C2_OFFSET
-	dev = (struct fsl_i2c *) (CFG_IMMR + CFG_I2C2_OFFSET);
+#ifdef	CONFIG_SYS_I2C2_OFFSET
+	dev = (struct fsl_i2c *) (CONFIG_SYS_IMMR + CONFIG_SYS_I2C2_OFFSET);
 
 	writeb(0, &dev->cr);			/* stop I2C controller */
 	udelay(5);				/* let it shutdown in peace */
@@ -368,25 +367,9 @@ i2c_probe(uchar chip)
 	return i2c_read(chip, 0, 0, NULL, 0);
 }
 
-uchar
-i2c_reg_read(uchar i2c_addr, uchar reg)
-{
-	uchar buf[1];
-
-	i2c_read(i2c_addr, reg, 1, buf, 1);
-
-	return buf[0];
-}
-
-void
-i2c_reg_write(uchar i2c_addr, uchar reg, uchar val)
-{
-	i2c_write(i2c_addr, reg, 1, &val, 1);
-}
-
 int i2c_set_bus_num(unsigned int bus)
 {
-#ifdef CFG_I2C2_OFFSET
+#ifdef CONFIG_SYS_I2C2_OFFSET
 	if (bus > 1) {
 #else
 	if (bus > 0) {
diff --git a/drivers/i2c/mxc_i2c.c b/drivers/i2c/mxc_i2c.c
index 1f6ba1f39..eedad065f 100644
--- a/drivers/i2c/mxc_i2c.c
+++ b/drivers/i2c/mxc_i2c.c
@@ -47,14 +47,14 @@
 #define I2SR_IIF	(1 << 1)
 #define I2SR_RX_NO_AK	(1 << 0)
 
-#ifdef CFG_I2C_MX31_PORT1
+#ifdef CONFIG_SYS_I2C_MX31_PORT1
 #define I2C_BASE	0x43f80000
-#elif defined (CFG_I2C_MX31_PORT2)
+#elif defined (CONFIG_SYS_I2C_MX31_PORT2)
 #define I2C_BASE	0x43f98000
-#elif defined (CFG_I2C_MX31_PORT3)
+#elif defined (CONFIG_SYS_I2C_MX31_PORT3)
 #define I2C_BASE	0x43f84000
 #else
-#error "define CFG_I2C_MX31_PORTx to use the mx31 I2C driver"
+#error "define CONFIG_SYS_I2C_MX31_PORTx to use the mx31 I2C driver"
 #endif
 
 #ifdef DEBUG
diff --git a/drivers/i2c/omap1510_i2c.c b/drivers/i2c/omap1510_i2c.c
index 388951db1..f91ee8884 100644
--- a/drivers/i2c/omap1510_i2c.c
+++ b/drivers/i2c/omap1510_i2c.c
@@ -32,7 +32,7 @@ void i2c_init (int speed, int slaveadd)
 		udelay (5000);
 	}
 
-	/* 12Mhz I2C module clock */
+	/* 12MHz I2C module clock */
 	outw (0, I2C_PSC);
 	outw (I2C_CON_EN, I2C_CON);
 	outw (0, I2C_SYSTEST);
@@ -205,7 +205,7 @@ int i2c_read (uchar chip, uint addr, int alen, uchar * buffer, int len)
 	for (i = 0; i < len; i++) {
 		if (i2c_read_byte (chip, addr + i, &buffer[i])) {
 			printf ("I2C read: I/O error\n");
-			i2c_init (CFG_I2C_SPEED, CFG_I2C_SLAVE);
+			i2c_init (CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
 			return 1;
 		}
 	}
@@ -230,7 +230,7 @@ int i2c_write (uchar chip, uint addr, int alen, uchar * buffer, int len)
 	for (i = 0; i < len; i++) {
 		if (i2c_write_byte (chip, addr + i, buffer[i])) {
 			printf ("I2C read: I/O error\n");
-			i2c_init (CFG_I2C_SPEED, CFG_I2C_SLAVE);
+			i2c_init (CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
 			return 1;
 		}
 	}
diff --git a/drivers/i2c/omap24xx_i2c.c b/drivers/i2c/omap24xx_i2c.c
index d16cfb123..4427938ff 100644
--- a/drivers/i2c/omap24xx_i2c.c
+++ b/drivers/i2c/omap24xx_i2c.c
@@ -25,9 +25,6 @@
 #include <asm/arch/i2c.h>
 #include <asm/io.h>
 
-#define inw(a) __raw_readw(a)
-#define outw(a,v) __raw_writew(a,v)
-
 static void wait_for_bb (void);
 static u16 wait_for_pin (void);
 static void flush_fifo(void);
@@ -36,32 +33,32 @@ void i2c_init (int speed, int slaveadd)
 {
 	u16 scl;
 
-	outw(0x2, I2C_SYSC); /* for ES2 after soft reset */
+	writew(0x2, I2C_SYSC); /* for ES2 after soft reset */
 	udelay(1000);
-	outw(0x0, I2C_SYSC); /* will probably self clear but */
+	writew(0x0, I2C_SYSC); /* will probably self clear but */
 
-	if (inw (I2C_CON) & I2C_CON_EN) {
-		outw (0, I2C_CON);
+	if (readw (I2C_CON) & I2C_CON_EN) {
+		writew (0, I2C_CON);
 		udelay (50000);
 	}
 
-	/* 12Mhz I2C module clock */
-	outw (0, I2C_PSC);
+	/* 12MHz I2C module clock */
+	writew (0, I2C_PSC);
 	speed = speed/1000;		    /* 100 or 400 */
 	scl = ((12000/(speed*2)) - 7);	/* use 7 when PSC = 0 */
-	outw (scl, I2C_SCLL);
-	outw (scl, I2C_SCLH);
+	writew (scl, I2C_SCLL);
+	writew (scl, I2C_SCLH);
 	/* own address */
-	outw (slaveadd, I2C_OA);
-	outw (I2C_CON_EN, I2C_CON);
+	writew (slaveadd, I2C_OA);
+	writew (I2C_CON_EN, I2C_CON);
 
 	/* have to enable intrrupts or OMAP i2c module doesn't work */
-	outw (I2C_IE_XRDY_IE | I2C_IE_RRDY_IE | I2C_IE_ARDY_IE |
-	      I2C_IE_NACK_IE | I2C_IE_AL_IE, I2C_IE);
+	writew (I2C_IE_XRDY_IE | I2C_IE_RRDY_IE | I2C_IE_ARDY_IE |
+		I2C_IE_NACK_IE | I2C_IE_AL_IE, I2C_IE);
 	udelay (1000);
 	flush_fifo();
-	outw (0xFFFF, I2C_STAT);
-	outw (0, I2C_CNT);
+	writew (0xFFFF, I2C_STAT);
+	writew (0, I2C_CNT);
 }
 
 static int i2c_read_byte (u8 devaddr, u8 regoffset, u8 * value)
@@ -73,19 +70,19 @@ static int i2c_read_byte (u8 devaddr, u8 regoffset, u8 * value)
 	wait_for_bb ();
 
 	/* one byte only */
-	outw (1, I2C_CNT);
+	writew (1, I2C_CNT);
 	/* set slave address */
-	outw (devaddr, I2C_SA);
+	writew (devaddr, I2C_SA);
 	/* no stop bit needed here */
-	outw (I2C_CON_EN | I2C_CON_MST | I2C_CON_STT | I2C_CON_TRX, I2C_CON);
+	writew (I2C_CON_EN | I2C_CON_MST | I2C_CON_STT | I2C_CON_TRX, I2C_CON);
 
 	status = wait_for_pin ();
 
 	if (status & I2C_STAT_XRDY) {
 		/* Important: have to use byte access */
-		*(volatile u8 *) (I2C_DATA) = regoffset;
+		writeb (regoffset, I2C_DATA);
 		udelay (20000);
-		if (inw (I2C_STAT) & I2C_STAT_NACK) {
+		if (readw (I2C_STAT) & I2C_STAT_NACK) {
 			i2c_error = 1;
 		}
 	} else {
@@ -94,42 +91,42 @@ static int i2c_read_byte (u8 devaddr, u8 regoffset, u8 * value)
 
 	if (!i2c_error) {
 		/* free bus, otherwise we can't use a combined transction */
-		outw (0, I2C_CON);
-		while (inw (I2C_STAT) || (inw (I2C_CON) & I2C_CON_MST)) {
+		writew (0, I2C_CON);
+		while (readw (I2C_STAT) || (readw (I2C_CON) & I2C_CON_MST)) {
 			udelay (10000);
 			/* Have to clear pending interrupt to clear I2C_STAT */
-			outw (0xFFFF, I2C_STAT);
+			writew (0xFFFF, I2C_STAT);
 		}
 
 		wait_for_bb ();
 		/* set slave address */
-		outw (devaddr, I2C_SA);
+		writew (devaddr, I2C_SA);
 		/* read one byte from slave */
-		outw (1, I2C_CNT);
+		writew (1, I2C_CNT);
 		/* need stop bit here */
-		outw (I2C_CON_EN | I2C_CON_MST | I2C_CON_STT | I2C_CON_STP,
-		      I2C_CON);
+		writew (I2C_CON_EN | I2C_CON_MST | I2C_CON_STT | I2C_CON_STP,
+			I2C_CON);
 
 		status = wait_for_pin ();
 		if (status & I2C_STAT_RRDY) {
-			*value = inw (I2C_DATA);
+			*value = readw (I2C_DATA);
 			udelay (20000);
 		} else {
 			i2c_error = 1;
 		}
 
 		if (!i2c_error) {
-			outw (I2C_CON_EN, I2C_CON);
-			while (inw (I2C_STAT)
-			       || (inw (I2C_CON) & I2C_CON_MST)) {
+			writew (I2C_CON_EN, I2C_CON);
+			while (readw (I2C_STAT)
+			       || (readw (I2C_CON) & I2C_CON_MST)) {
 				udelay (10000);
-				outw (0xFFFF, I2C_STAT);
+				writew (0xFFFF, I2C_STAT);
 			}
 		}
 	}
 	flush_fifo();
-	outw (0xFFFF, I2C_STAT);
-	outw (0, I2C_CNT);
+	writew (0xFFFF, I2C_STAT);
+	writew (0, I2C_CNT);
 	return i2c_error;
 }
 
@@ -142,22 +139,22 @@ static int i2c_write_byte (u8 devaddr, u8 regoffset, u8 value)
 	wait_for_bb ();
 
 	/* two bytes */
-	outw (2, I2C_CNT);
+	writew (2, I2C_CNT);
 	/* set slave address */
-	outw (devaddr, I2C_SA);
+	writew (devaddr, I2C_SA);
 	/* stop bit needed here */
-	outw (I2C_CON_EN | I2C_CON_MST | I2C_CON_STT | I2C_CON_TRX |
-	      I2C_CON_STP, I2C_CON);
+	writew (I2C_CON_EN | I2C_CON_MST | I2C_CON_STT | I2C_CON_TRX |
+		I2C_CON_STP, I2C_CON);
 
 	/* wait until state change */
 	status = wait_for_pin ();
 
 	if (status & I2C_STAT_XRDY) {
 		/* send out two bytes */
-		outw ((value << 8) + regoffset, I2C_DATA);
+		writew ((value << 8) + regoffset, I2C_DATA);
 		/* must have enough delay to allow BB bit to go low */
 		udelay (50000);
-		if (inw (I2C_STAT) & I2C_STAT_NACK) {
+		if (readw (I2C_STAT) & I2C_STAT_NACK) {
 			i2c_error = 1;
 		}
 	} else {
@@ -167,18 +164,18 @@ static int i2c_write_byte (u8 devaddr, u8 regoffset, u8 value)
 	if (!i2c_error) {
 		int eout = 200;
 
-		outw (I2C_CON_EN, I2C_CON);
-		while ((stat = inw (I2C_STAT)) || (inw (I2C_CON) & I2C_CON_MST)) {
+		writew (I2C_CON_EN, I2C_CON);
+		while ((stat = readw (I2C_STAT)) || (readw (I2C_CON) & I2C_CON_MST)) {
 			udelay (1000);
 			/* have to read to clear intrrupt */
-			outw (0xFFFF, I2C_STAT);
+			writew (0xFFFF, I2C_STAT);
 			if(--eout == 0) /* better leave with error than hang */
 				break;
 		}
 	}
 	flush_fifo();
-	outw (0xFFFF, I2C_STAT);
-	outw (0, I2C_CNT);
+	writew (0xFFFF, I2C_STAT);
+	writew (0, I2C_CNT);
 	return i2c_error;
 }
 
@@ -189,10 +186,10 @@ static void flush_fifo(void)
 	 * you get a bus error
 	 */
 	while(1){
-		stat = inw(I2C_STAT);
+		stat = readw(I2C_STAT);
 		if(stat == I2C_STAT_RRDY){
-			inw(I2C_DATA);
-			outw(I2C_STAT_RRDY,I2C_STAT);
+			readw(I2C_DATA);
+			writew(I2C_STAT_RRDY,I2C_STAT);
 			udelay(1000);
 		}else
 			break;
@@ -203,7 +200,7 @@ int i2c_probe (uchar chip)
 {
 	int res = 1; /* default = fail */
 
-	if (chip == inw (I2C_OA)) {
+	if (chip == readw (I2C_OA)) {
 		return res;
 	}
 
@@ -211,27 +208,27 @@ int i2c_probe (uchar chip)
 	wait_for_bb ();
 
 	/* try to read one byte */
-	outw (1, I2C_CNT);
+	writew (1, I2C_CNT);
 	/* set slave address */
-	outw (chip, I2C_SA);
+	writew (chip, I2C_SA);
 	/* stop bit needed here */
-	outw (I2C_CON_EN | I2C_CON_MST | I2C_CON_STT | I2C_CON_STP, I2C_CON);
+	writew (I2C_CON_EN | I2C_CON_MST | I2C_CON_STT | I2C_CON_STP, I2C_CON);
 	/* enough delay for the NACK bit set */
 	udelay (50000);
 
-	if (!(inw (I2C_STAT) & I2C_STAT_NACK)) {
+	if (!(readw (I2C_STAT) & I2C_STAT_NACK)) {
 		res = 0;      /* success case */
 		flush_fifo();
-		outw(0xFFFF, I2C_STAT);
+		writew(0xFFFF, I2C_STAT);
 	} else {
-		outw(0xFFFF, I2C_STAT);	 /* failue, clear sources*/
-		outw (inw (I2C_CON) | I2C_CON_STP, I2C_CON); /* finish up xfer */
+		writew(0xFFFF, I2C_STAT);	 /* failue, clear sources*/
+		writew (readw (I2C_CON) | I2C_CON_STP, I2C_CON); /* finish up xfer */
 		udelay(20000);
 		wait_for_bb ();
 	}
 	flush_fifo();
-	outw (0, I2C_CNT); /* don't allow any more data in...we don't want it.*/
-	outw(0xFFFF, I2C_STAT);
+	writew (0, I2C_CNT); /* don't allow any more data in...we don't want it.*/
+	writew(0xFFFF, I2C_STAT);
 	return res;
 }
 
@@ -252,7 +249,7 @@ int i2c_read (uchar chip, uint addr, int alen, uchar * buffer, int len)
 	for (i = 0; i < len; i++) {
 		if (i2c_read_byte (chip, addr + i, &buffer[i])) {
 			printf ("I2C read: I/O error\n");
-			i2c_init (CFG_I2C_SPEED, CFG_I2C_SLAVE);
+			i2c_init (CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
 			return 1;
 		}
 	}
@@ -277,7 +274,7 @@ int i2c_write (uchar chip, uint addr, int alen, uchar * buffer, int len)
 	for (i = 0; i < len; i++) {
 		if (i2c_write_byte (chip, addr + i, buffer[i])) {
 			printf ("I2C read: I/O error\n");
-			i2c_init (CFG_I2C_SPEED, CFG_I2C_SLAVE);
+			i2c_init (CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
 			return 1;
 		}
 	}
@@ -290,17 +287,17 @@ static void wait_for_bb (void)
 	int timeout = 10;
 	u16 stat;
 
-	outw(0xFFFF, I2C_STAT);	 /* clear current interruts...*/
-	while ((stat = inw (I2C_STAT) & I2C_STAT_BB) && timeout--) {
-		outw (stat, I2C_STAT);
+	writew(0xFFFF, I2C_STAT);	 /* clear current interruts...*/
+	while ((stat = readw (I2C_STAT) & I2C_STAT_BB) && timeout--) {
+		writew (stat, I2C_STAT);
 		udelay (50000);
 	}
 
 	if (timeout <= 0) {
 		printf ("timed out in wait_for_bb: I2C_STAT=%x\n",
-			inw (I2C_STAT));
+			readw (I2C_STAT));
 	}
-	outw(0xFFFF, I2C_STAT);	 /* clear delayed stuff*/
+	writew(0xFFFF, I2C_STAT);	 /* clear delayed stuff*/
 }
 
 static u16 wait_for_pin (void)
@@ -310,7 +307,7 @@ static u16 wait_for_pin (void)
 
 	do {
 		udelay (1000);
-		status = inw (I2C_STAT);
+		status = readw (I2C_STAT);
 	} while (  !(status &
 		   (I2C_STAT_ROVR | I2C_STAT_XUDF | I2C_STAT_XRDY |
 		    I2C_STAT_RRDY | I2C_STAT_ARDY | I2C_STAT_NACK |
@@ -318,8 +315,8 @@ static u16 wait_for_pin (void)
 
 	if (timeout <= 0) {
 		printf ("timed out in wait_for_pin: I2C_STAT=%x\n",
-			inw (I2C_STAT));
-			outw(0xFFFF, I2C_STAT);
+			readw (I2C_STAT));
+			writew(0xFFFF, I2C_STAT);
 }
 	return status;
 }
diff --git a/drivers/i2c/soft_i2c.c b/drivers/i2c/soft_i2c.c
index 23db2ee8f..a27de5a7e 100644
--- a/drivers/i2c/soft_i2c.c
+++ b/drivers/i2c/soft_i2c.c
@@ -28,6 +28,7 @@
 #include <common.h>
 #ifdef	CONFIG_MPC8260			/* only valid for MPC8260 */
 #include <ioports.h>
+#include <asm/io.h>
 #endif
 #ifdef	CONFIG_AT91RM9200		/* need this for the at91rm9200 */
 #include <asm/io.h>
@@ -39,6 +40,9 @@
 #ifdef CONFIG_LPC2292
 #include <asm/arch/hardware.h>
 #endif
+#ifdef	CONFIG_MPC866			/* only valid for MPC866 */
+#include <asm/io.h>
+#endif
 #include <i2c.h>
 
 /* #define	DEBUG_I2C	*/
@@ -68,17 +72,23 @@ DECLARE_GLOBAL_DATA_PTR;
 #define PRINTD(fmt,args...)
 #endif
 
+#if defined(CONFIG_I2C_MULTI_BUS)
+static unsigned int i2c_bus_num __attribute__ ((section (".data"))) = 0;
+#endif /* CONFIG_I2C_MULTI_BUS */
+
 /*-----------------------------------------------------------------------
  * Local functions
  */
+#if !defined(CONFIG_SYS_I2C_INIT_BOARD)
 static void  send_reset	(void);
+#endif
 static void  send_start	(void);
 static void  send_stop	(void);
 static void  send_ack	(int);
 static int   write_byte	(uchar byte);
 static uchar read_byte	(int);
 
-
+#if !defined(CONFIG_SYS_I2C_INIT_BOARD)
 /*-----------------------------------------------------------------------
  * Send a reset sequence consisting of 9 clocks with the data signal high
  * to clock any confused device back into an idle state.  Also send a
@@ -86,12 +96,7 @@ static uchar read_byte	(int);
  */
 static void send_reset(void)
 {
-#ifdef	CONFIG_MPC8260
-	volatile ioport_t *iop = ioport_addr((immap_t *)CFG_IMMR, I2C_PORT);
-#endif
-#ifdef	CONFIG_8xx
-	volatile immap_t *immr = (immap_t *)CFG_IMMR;
-#endif
+	I2C_SOFT_DECLARATIONS	/* intentional without ';' */
 	int j;
 
 	I2C_SCL(1);
@@ -111,18 +116,14 @@ static void send_reset(void)
 	send_stop();
 	I2C_TRISTATE;
 }
+#endif
 
 /*-----------------------------------------------------------------------
  * START: High -> Low on SDA while SCL is High
  */
 static void send_start(void)
 {
-#ifdef	CONFIG_MPC8260
-	volatile ioport_t *iop = ioport_addr((immap_t *)CFG_IMMR, I2C_PORT);
-#endif
-#ifdef	CONFIG_8xx
-	volatile immap_t *immr = (immap_t *)CFG_IMMR;
-#endif
+	I2C_SOFT_DECLARATIONS	/* intentional without ';' */
 
 	I2C_DELAY;
 	I2C_SDA(1);
@@ -139,12 +140,7 @@ static void send_start(void)
  */
 static void send_stop(void)
 {
-#ifdef	CONFIG_MPC8260
-	volatile ioport_t *iop = ioport_addr((immap_t *)CFG_IMMR, I2C_PORT);
-#endif
-#ifdef	CONFIG_8xx
-	volatile immap_t *immr = (immap_t *)CFG_IMMR;
-#endif
+	I2C_SOFT_DECLARATIONS	/* intentional without ';' */
 
 	I2C_SCL(0);
 	I2C_DELAY;
@@ -164,12 +160,7 @@ static void send_stop(void)
  */
 static void send_ack(int ack)
 {
-#ifdef	CONFIG_MPC8260
-	volatile ioport_t *iop = ioport_addr((immap_t *)CFG_IMMR, I2C_PORT);
-#endif
-#ifdef	CONFIG_8xx
-	volatile immap_t *immr = (immap_t *)CFG_IMMR;
-#endif
+	I2C_SOFT_DECLARATIONS	/* intentional without ';' */
 
 	I2C_SCL(0);
 	I2C_DELAY;
@@ -189,12 +180,7 @@ static void send_ack(int ack)
  */
 static int write_byte(uchar data)
 {
-#ifdef	CONFIG_MPC8260
-	volatile ioport_t *iop = ioport_addr((immap_t *)CFG_IMMR, I2C_PORT);
-#endif
-#ifdef	CONFIG_8xx
-	volatile immap_t *immr = (immap_t *)CFG_IMMR;
-#endif
+	I2C_SOFT_DECLARATIONS	/* intentional without ';' */
 	int j;
 	int nack;
 
@@ -230,6 +216,51 @@ static int write_byte(uchar data)
 	return(nack);	/* not a nack is an ack */
 }
 
+#if defined(CONFIG_I2C_MULTI_BUS)
+/*
+ * Functions for multiple I2C bus handling
+ */
+unsigned int i2c_get_bus_num(void)
+{
+	return i2c_bus_num;
+}
+
+int i2c_set_bus_num(unsigned int bus)
+{
+#if defined(CONFIG_I2C_MUX)
+	if (bus < CONFIG_SYS_MAX_I2C_BUS) {
+		i2c_bus_num = bus;
+	} else {
+		int	ret;
+
+		ret = i2x_mux_select_mux(bus);
+		if (ret == 0)
+			i2c_bus_num = bus;
+		else
+			return ret;
+	}
+#else
+	if (bus >= CONFIG_SYS_MAX_I2C_BUS)
+		return -1;
+	i2c_bus_num = bus;
+#endif
+	return 0;
+}
+
+/* TODO: add 100/400k switching */
+unsigned int i2c_get_bus_speed(void)
+{
+	return CONFIG_SYS_I2C_SPEED;
+}
+
+int i2c_set_bus_speed(unsigned int speed)
+{
+	if (speed != CONFIG_SYS_I2C_SPEED)
+		return -1;
+
+	return 0;
+}
+#endif
 
 /*-----------------------------------------------------------------------
  * if ack == I2C_ACK, ACK the byte so can continue reading, else
@@ -237,12 +268,7 @@ static int write_byte(uchar data)
  */
 static uchar read_byte(int ack)
 {
-#ifdef	CONFIG_MPC8260
-	volatile ioport_t *iop = ioport_addr((immap_t *)CFG_IMMR, I2C_PORT);
-#endif
-#ifdef	CONFIG_8xx
-	volatile immap_t *immr = (immap_t *)CFG_IMMR;
-#endif
+	I2C_SOFT_DECLARATIONS	/* intentional without ';' */
 	int  data;
 	int  j;
 
@@ -275,6 +301,12 @@ static uchar read_byte(int ack)
  */
 void i2c_init (int speed, int slaveaddr)
 {
+#if defined(CONFIG_SYS_I2C_INIT_BOARD)
+	/* call board specific i2c bus reset routine before accessing the   */
+	/* environment, which might be in a chip on that bus. For details   */
+	/* about this problem see doc/I2C_Edge_Conditions.                  */
+	i2c_init_board();
+#else
 	/*
 	 * WARNING: Do NOT save speed in a static variable: if the
 	 * I2C routines are called before RAM is initialized (to read
@@ -282,6 +314,7 @@ void i2c_init (int speed, int slaveaddr)
 	 * system will crash.
 	 */
 	send_reset ();
+#endif
 }
 
 /*-----------------------------------------------------------------------
@@ -313,7 +346,7 @@ int  i2c_read(uchar chip, uint addr, int alen, uchar *buffer, int len)
 	PRINTD("i2c_read: chip %02X addr %02X alen %d buffer %p len %d\n",
 		chip, addr, alen, buffer, len);
 
-#ifdef CFG_I2C_EEPROM_ADDR_OVERFLOW
+#ifdef CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW
 	/*
 	 * EEPROM chips that implement "address overflow" are ones
 	 * like Catalyst 24WC04/08/16 which has 9/10/11 bits of
@@ -325,7 +358,7 @@ int  i2c_read(uchar chip, uint addr, int alen, uchar *buffer, int len)
 	 * still be one byte because the extra address bits are
 	 * hidden in the chip address.
 	 */
-	chip |= ((addr >> (alen * 8)) & CFG_I2C_EEPROM_ADDR_OVERFLOW);
+	chip |= ((addr >> (alen * 8)) & CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW);
 
 	PRINTD("i2c_read: fix addr_overflow: chip %02X addr %02X\n",
 		chip, addr);
@@ -401,23 +434,3 @@ int  i2c_write(uchar chip, uint addr, int alen, uchar *buffer, int len)
 	send_stop();
 	return(failures);
 }
-
-/*-----------------------------------------------------------------------
- * Read a register
- */
-uchar i2c_reg_read(uchar i2c_addr, uchar reg)
-{
-	uchar buf;
-
-	i2c_read(i2c_addr, reg, 1, &buf, 1);
-
-	return(buf);
-}
-
-/*-----------------------------------------------------------------------
- * Write a register
- */
-void i2c_reg_write(uchar i2c_addr, uchar reg, uchar val)
-{
-	i2c_write(i2c_addr, reg, 1, &val, 1);
-}
diff --git a/drivers/i2c/tsi108_i2c.c b/drivers/i2c/tsi108_i2c.c
index 695e39341..fda822c52 100644
--- a/drivers/i2c/tsi108_i2c.c
+++ b/drivers/i2c/tsi108_i2c.c
@@ -60,14 +60,14 @@ static int i2c_read_byte (
 		chan_offset = TSI108_I2C_SDRAM_OFFSET;
 
 	/* Check if I2C operation is in progress */
-	temp = *(u32 *) (CFG_TSI108_CSR_BASE + chan_offset + I2C_CNTRL2);
+	temp = *(u32 *) (CONFIG_SYS_TSI108_CSR_BASE + chan_offset + I2C_CNTRL2);
 
 	if (0 == (temp & (I2C_CNTRL2_RD_STATUS | I2C_CNTRL2_WR_STATUS |
 			  I2C_CNTRL2_START))) {
 		/* Set device address and operation (read = 0) */
 		temp = (byte_addr << 16) | ((chip_addr & 0x07) << 8) |
 		    ((chip_addr >> 3) & 0x0F);
-		*(u32 *) (CFG_TSI108_CSR_BASE + chan_offset + I2C_CNTRL1) =
+		*(u32 *) (CONFIG_SYS_TSI108_CSR_BASE + chan_offset + I2C_CNTRL1) =
 		    temp;
 
 		/* Issue the read command
@@ -75,13 +75,13 @@ static int i2c_read_byte (
 		 * (size = 1 byte, lane = 0)
 		 */
 
-		*(u32 *) (CFG_TSI108_CSR_BASE + chan_offset + I2C_CNTRL2) =
+		*(u32 *) (CONFIG_SYS_TSI108_CSR_BASE + chan_offset + I2C_CNTRL2) =
 		    (I2C_CNTRL2_START);
 
 		/* Wait until operation completed */
 		do {
 			/* Read I2C operation status */
-			temp = *(u32 *) (CFG_TSI108_CSR_BASE + chan_offset + I2C_CNTRL2);
+			temp = *(u32 *) (CONFIG_SYS_TSI108_CSR_BASE + chan_offset + I2C_CNTRL2);
 
 			if (0 == (temp & (I2C_CNTRL2_RD_STATUS | I2C_CNTRL2_START))) {
 				if (0 == (temp &
@@ -90,7 +90,7 @@ static int i2c_read_byte (
 				    ) {
 					op_status = TSI108_I2C_SUCCESS;
 
-					temp = *(u32 *) (CFG_TSI108_CSR_BASE +
+					temp = *(u32 *) (CONFIG_SYS_TSI108_CSR_BASE +
 							 chan_offset +
 							 I2C_RD_DATA);
 
@@ -172,25 +172,25 @@ static int i2c_write_byte (uchar chip_addr,/* I2C device address on the bus */
 	u32 op_status = TSI108_I2C_TIMEOUT_ERR;
 
 	/* Check if I2C operation is in progress */
-	temp = *(u32 *) (CFG_TSI108_CSR_BASE + TSI108_I2C_OFFSET + I2C_CNTRL2);
+	temp = *(u32 *) (CONFIG_SYS_TSI108_CSR_BASE + TSI108_I2C_OFFSET + I2C_CNTRL2);
 
 	if (0 == (temp & (I2C_CNTRL2_RD_STATUS | I2C_CNTRL2_WR_STATUS | I2C_CNTRL2_START))) {
 		/* Place data into the I2C Tx Register */
-		*(u32 *) (CFG_TSI108_CSR_BASE + TSI108_I2C_OFFSET +
+		*(u32 *) (CONFIG_SYS_TSI108_CSR_BASE + TSI108_I2C_OFFSET +
 			  I2C_TX_DATA) = (u32) * buffer;
 
 		/* Set device address and operation  */
 		temp =
 		    I2C_CNTRL1_I2CWRITE | (byte_addr << 16) |
 		    ((chip_addr & 0x07) << 8) | ((chip_addr >> 3) & 0x0F);
-		*(u32 *) (CFG_TSI108_CSR_BASE + TSI108_I2C_OFFSET +
+		*(u32 *) (CONFIG_SYS_TSI108_CSR_BASE + TSI108_I2C_OFFSET +
 			  I2C_CNTRL1) = temp;
 
 		/* Issue the write command (at this moment all other parameters
 		 * are 0 (size = 1 byte, lane = 0)
 		 */
 
-		*(u32 *) (CFG_TSI108_CSR_BASE + TSI108_I2C_OFFSET +
+		*(u32 *) (CONFIG_SYS_TSI108_CSR_BASE + TSI108_I2C_OFFSET +
 			  I2C_CNTRL2) = (I2C_CNTRL2_START);
 
 		op_status = TSI108_I2C_TIMEOUT_ERR;
@@ -198,7 +198,7 @@ static int i2c_write_byte (uchar chip_addr,/* I2C device address on the bus */
 		/* Wait until operation completed */
 		do {
 			/* Read I2C operation status */
-			temp = *(u32 *) (CFG_TSI108_CSR_BASE + TSI108_I2C_OFFSET + I2C_CNTRL2);
+			temp = *(u32 *) (CONFIG_SYS_TSI108_CSR_BASE + TSI108_I2C_OFFSET + I2C_CNTRL2);
 
 			if (0 == (temp & (I2C_CNTRL2_WR_STATUS | I2C_CNTRL2_START))) {
 				if (0 == (temp &
diff --git a/drivers/input/i8042.c b/drivers/input/i8042.c
index d152768b8..58094c925 100644
--- a/drivers/input/i8042.c
+++ b/drivers/input/i8042.c
@@ -41,7 +41,7 @@ extern void gt_cpcidvi_out8(u32 offset, u8 data);
 
 #ifdef CONFIG_CONSOLE_CURSOR
 extern void console_cursor (int state);
-static int blinkCount = CFG_CONSOLE_BLINK_COUNT;
+static int blinkCount = CONFIG_SYS_CONSOLE_BLINK_COUNT;
 static int cursor_state = 0;
 #endif
 
@@ -368,7 +368,7 @@ int i8042_tstc (void)
     {
 	cursor_state ^= 1;
 	console_cursor (cursor_state);
-	blinkCount = CFG_CONSOLE_BLINK_COUNT;
+	blinkCount = CONFIG_SYS_CONSOLE_BLINK_COUNT;
 	udelay (10);
     }
 #endif
@@ -409,7 +409,7 @@ int i8042_getc (void)
 	    {
 		cursor_state ^= 1;
 		console_cursor (cursor_state);
-		blinkCount = CFG_CONSOLE_BLINK_COUNT;
+		blinkCount = CONFIG_SYS_CONSOLE_BLINK_COUNT;
 	    }
 	    udelay (10);
 #endif
diff --git a/drivers/input/keyboard.c b/drivers/input/keyboard.c
index a634d76d6..512b9f28c 100644
--- a/drivers/input/keyboard.c
+++ b/drivers/input/keyboard.c
@@ -258,12 +258,12 @@ void handle_scancode(unsigned char scancode)
  * Init
  ******************************************************************/
 
-#ifdef CFG_CONSOLE_OVERWRITE_ROUTINE
+#ifdef CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
 extern int overwrite_console (void);
 #define OVERWRITE_CONSOLE overwrite_console ()
 #else
 #define OVERWRITE_CONSOLE 0
-#endif /* CFG_CONSOLE_OVERWRITE_ROUTINE */
+#endif /* CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE */
 
 int kbd_init (void)
 {
diff --git a/drivers/input/ps2ser.c b/drivers/input/ps2ser.c
index 480ffa25a..1af3fde64 100644
--- a/drivers/input/ps2ser.c
+++ b/drivers/input/ps2ser.c
@@ -18,7 +18,7 @@
 #include <asm/io.h>
 #include <asm/atomic.h>
 #include <ps2mult.h>
-#if defined(CFG_NS16550) || defined(CONFIG_MPC85xx)
+#if defined(CONFIG_SYS_NS16550) || defined(CONFIG_MPC85xx)
 #include <ns16550.h>
 #endif
 
@@ -51,9 +51,9 @@ DECLARE_GLOBAL_DATA_PTR;
       defined(CONFIG_MPC8548) || defined(CONFIG_MPC8555)
 
 #if CONFIG_PS2SERIAL == 1
-#define COM_BASE (CFG_CCSRBAR+0x4500)
+#define COM_BASE (CONFIG_SYS_CCSRBAR+0x4500)
 #elif CONFIG_PS2SERIAL == 2
-#define COM_BASE (CFG_CCSRBAR+0x4600)
+#define COM_BASE (CONFIG_SYS_CCSRBAR+0x4600)
 #else
 #error CONFIG_PS2SERIAL must be in 1 ... 2
 #endif
@@ -88,7 +88,7 @@ int ps2ser_init(void)
 	/* select clock sources */
 #if defined(CONFIG_MGT5100)
 	psc->psc_clock_select = 0xdd00;
-	baseclk = (CFG_MPC5XXX_CLKIN + 16) / 32;
+	baseclk = (CONFIG_SYS_MPC5XXX_CLKIN + 16) / 32;
 #elif defined(CONFIG_MPC5200)
 	psc->psc_clock_select = 0;
 	baseclk = (gd->ipb_clk + 16) / 32;
@@ -129,8 +129,8 @@ int ps2ser_init(void)
 
 	com_port->ier = 0x00;
 	com_port->lcr = LCR_BKSE | LCR_8N1;
-	com_port->dll = (CFG_NS16550_CLK / 16 / PS2SER_BAUD) & 0xff;
-	com_port->dlm = ((CFG_NS16550_CLK / 16 / PS2SER_BAUD) >> 8) & 0xff;
+	com_port->dll = (CONFIG_SYS_NS16550_CLK / 16 / PS2SER_BAUD) & 0xff;
+	com_port->dlm = ((CONFIG_SYS_NS16550_CLK / 16 / PS2SER_BAUD) >> 8) & 0xff;
 	com_port->lcr = LCR_8N1;
 	com_port->mcr = (MCR_DTR | MCR_RTS);
 	com_port->fcr = (FCR_FIFO_EN | FCR_RXSR | FCR_TXSR);
diff --git a/drivers/misc/fsl_law.c b/drivers/misc/fsl_law.c
index 2e946143b..44c9e91cd 100644
--- a/drivers/misc/fsl_law.c
+++ b/drivers/misc/fsl_law.c
@@ -46,12 +46,13 @@ DECLARE_GLOBAL_DATA_PTR;
 
 void set_law(u8 idx, phys_addr_t addr, enum law_size sz, enum law_trgt_if id)
 {
-	volatile u32 *base = (volatile u32 *)(CFG_IMMR + 0xc08);
+	volatile u32 *base = (volatile u32 *)(CONFIG_SYS_IMMR + 0xc08);
 	volatile u32 *lawbar = base + 8 * idx;
 	volatile u32 *lawar = base + 8 * idx + 2;
 
 	gd->used_laws |= (1 << idx);
 
+	out_be32(lawar, 0);
 	out_be32(lawbar, addr >> 12);
 	out_be32(lawar, LAWAR_EN | ((u32)id << 20) | (u32)sz);
 
@@ -91,7 +92,7 @@ int set_last_law(phys_addr_t addr, enum law_size sz, enum law_trgt_if id)
 
 void disable_law(u8 idx)
 {
-	volatile u32 *base = (volatile u32 *)(CFG_IMMR + 0xc08);
+	volatile u32 *base = (volatile u32 *)(CONFIG_SYS_IMMR + 0xc08);
 	volatile u32 *lawbar = base + 8 * idx;
 	volatile u32 *lawar = base + 8 * idx + 2;
 
@@ -105,7 +106,7 @@ void disable_law(u8 idx)
 
 void print_laws(void)
 {
-	volatile u32 *base = (volatile u32 *)(CFG_IMMR + 0xc08);
+	volatile u32 *base = (volatile u32 *)(CONFIG_SYS_IMMR + 0xc08);
 	volatile u32 *lawbar = base;
 	volatile u32 *lawar = base + 2;
 	int i;
diff --git a/drivers/misc/ns87308.c b/drivers/misc/ns87308.c
index 6642c2e07..9130a1ff2 100644
--- a/drivers/misc/ns87308.c
+++ b/drivers/misc/ns87308.c
@@ -27,7 +27,7 @@
 
 void initialise_ns87308 (void)
 {
-#ifdef CFG_NS87308_PS2MOD
+#ifdef CONFIG_SYS_NS87308_PS2MOD
 	unsigned char data;
 
 	/*
@@ -38,80 +38,80 @@ void initialise_ns87308 (void)
 	write_pnp_config(SUPOERIO_CONF1, data);
 #endif
 
-#if (CFG_NS87308_DEVS & CFG_NS87308_KBC1)
-	PNP_SET_DEVICE_BASE(LDEV_KBC1, CFG_NS87308_KBC1_BASE);
+#if (CONFIG_SYS_NS87308_DEVS & CONFIG_SYS_NS87308_KBC1)
+	PNP_SET_DEVICE_BASE(LDEV_KBC1, CONFIG_SYS_NS87308_KBC1_BASE);
 	write_pnp_config(LUN_CONFIG_REG, 0);
 	write_pnp_config(CBASE_HIGH, 0x00);
 	write_pnp_config(CBASE_LOW, 0x64);
 #endif
 
-#if (CFG_NS87308_DEVS & CFG_NS87308_MOUSE)
+#if (CONFIG_SYS_NS87308_DEVS & CONFIG_SYS_NS87308_MOUSE)
 	PNP_ACTIVATE_DEVICE(LDEV_MOUSE);
 #endif
 
-#if (CFG_NS87308_DEVS & CFG_NS87308_RTC_APC)
-	PNP_SET_DEVICE_BASE(LDEV_RTC_APC, CFG_NS87308_RTC_BASE);
+#if (CONFIG_SYS_NS87308_DEVS & CONFIG_SYS_NS87308_RTC_APC)
+	PNP_SET_DEVICE_BASE(LDEV_RTC_APC, CONFIG_SYS_NS87308_RTC_BASE);
 #endif
 
-#if (CFG_NS87308_DEVS & CFG_NS87308_FDC)
-	PNP_SET_DEVICE_BASE(LDEV_FDC, CFG_NS87308_FDC_BASE);
+#if (CONFIG_SYS_NS87308_DEVS & CONFIG_SYS_NS87308_FDC)
+	PNP_SET_DEVICE_BASE(LDEV_FDC, CONFIG_SYS_NS87308_FDC_BASE);
 	write_pnp_config(LUN_CONFIG_REG, 0x40);
 #endif
 
-#if (CFG_NS87308_DEVS & CFG_NS87308_RARP)
-	PNP_SET_DEVICE_BASE(LDEV_PARP, CFG_NS87308_LPT_BASE);
+#if (CONFIG_SYS_NS87308_DEVS & CONFIG_SYS_NS87308_RARP)
+	PNP_SET_DEVICE_BASE(LDEV_PARP, CONFIG_SYS_NS87308_LPT_BASE);
 #endif
 
-#if (CFG_NS87308_DEVS & CFG_NS87308_UART1)
-	PNP_SET_DEVICE_BASE(LDEV_UART1, CFG_NS87308_UART1_BASE);
+#if (CONFIG_SYS_NS87308_DEVS & CONFIG_SYS_NS87308_UART1)
+	PNP_SET_DEVICE_BASE(LDEV_UART1, CONFIG_SYS_NS87308_UART1_BASE);
 #endif
 
-#if (CFG_NS87308_DEVS & CFG_NS87308_UART2)
-	PNP_SET_DEVICE_BASE(LDEV_UART2, CFG_NS87308_UART2_BASE);
+#if (CONFIG_SYS_NS87308_DEVS & CONFIG_SYS_NS87308_UART2)
+	PNP_SET_DEVICE_BASE(LDEV_UART2, CONFIG_SYS_NS87308_UART2_BASE);
 #endif
 
-#if (CFG_NS87308_DEVS & CFG_NS87308_GPIO)
-	PNP_SET_DEVICE_BASE(LDEV_GPIO, CFG_NS87308_GPIO_BASE);
+#if (CONFIG_SYS_NS87308_DEVS & CONFIG_SYS_NS87308_GPIO)
+	PNP_SET_DEVICE_BASE(LDEV_GPIO, CONFIG_SYS_NS87308_GPIO_BASE);
 #endif
 
-#if (CFG_NS87308_DEVS & CFG_NS87308_POWRMAN)
-#ifndef CFG_NS87308_PWMAN_BASE
+#if (CONFIG_SYS_NS87308_DEVS & CONFIG_SYS_NS87308_POWRMAN)
+#ifndef CONFIG_SYS_NS87308_PWMAN_BASE
 	PNP_ACTIVATE_DEVICE(LDEV_POWRMAN);
 #else
-	PNP_SET_DEVICE_BASE(LDEV_POWRMAN, CFG_NS87308_PWMAN_BASE);
+	PNP_SET_DEVICE_BASE(LDEV_POWRMAN, CONFIG_SYS_NS87308_PWMAN_BASE);
 
 	/*
 	 * Enable all units
 	 */
-	write_pm_reg(CFG_NS87308_PWMAN_BASE, PWM_FER1, 0x7d);
-	write_pm_reg(CFG_NS87308_PWMAN_BASE, PWM_FER2, 0x87);
+	write_pm_reg(CONFIG_SYS_NS87308_PWMAN_BASE, PWM_FER1, 0x7d);
+	write_pm_reg(CONFIG_SYS_NS87308_PWMAN_BASE, PWM_FER2, 0x87);
 
-#ifdef CFG_NS87308_PMC1
-	write_pm_reg(CFG_NS87308_PWMAN_BASE, PWM_PMC1, CFG_NS87308_PMC1);
+#ifdef CONFIG_SYS_NS87308_PMC1
+	write_pm_reg(CONFIG_SYS_NS87308_PWMAN_BASE, PWM_PMC1, CONFIG_SYS_NS87308_PMC1);
 #endif
 
-#ifdef CFG_NS87308_PMC2
-	write_pm_reg(CFG_NS87308_PWMAN_BASE, PWM_PMC2, CFG_NS87308_PMC2);
+#ifdef CONFIG_SYS_NS87308_PMC2
+	write_pm_reg(CONFIG_SYS_NS87308_PWMAN_BASE, PWM_PMC2, CONFIG_SYS_NS87308_PMC2);
 #endif
 
-#ifdef CFG_NS87308_PMC3
-	write_pm_reg(CFG_NS87308_PWMAN_BASE, PWM_PMC3, CFG_NS87308_PMC3);
+#ifdef CONFIG_SYS_NS87308_PMC3
+	write_pm_reg(CONFIG_SYS_NS87308_PWMAN_BASE, PWM_PMC3, CONFIG_SYS_NS87308_PMC3);
 #endif
 #endif
 #endif
 
-#ifdef CFG_NS87308_CS0_BASE
-	PNP_PGCS_CSLINE_BASE(0, CFG_NS87308_CS0_BASE);
-	PNP_PGCS_CSLINE_CONF(0, CFG_NS87308_CS0_CONF);
+#ifdef CONFIG_SYS_NS87308_CS0_BASE
+	PNP_PGCS_CSLINE_BASE(0, CONFIG_SYS_NS87308_CS0_BASE);
+	PNP_PGCS_CSLINE_CONF(0, CONFIG_SYS_NS87308_CS0_CONF);
 #endif
 
-#ifdef CFG_NS87308_CS1_BASE
-	PNP_PGCS_CSLINE_BASE(1, CFG_NS87308_CS1_BASE);
-	PNP_PGCS_CSLINE_CONF(1, CFG_NS87308_CS1_CONF);
+#ifdef CONFIG_SYS_NS87308_CS1_BASE
+	PNP_PGCS_CSLINE_BASE(1, CONFIG_SYS_NS87308_CS1_BASE);
+	PNP_PGCS_CSLINE_CONF(1, CONFIG_SYS_NS87308_CS1_CONF);
 #endif
 
-#ifdef CFG_NS87308_CS2_BASE
-	PNP_PGCS_CSLINE_BASE(2, CFG_NS87308_CS2_BASE);
-	PNP_PGCS_CSLINE_CONF(2, CFG_NS87308_CS2_CONF);
+#ifdef CONFIG_SYS_NS87308_CS2_BASE
+	PNP_PGCS_CSLINE_BASE(2, CONFIG_SYS_NS87308_CS2_BASE);
+	PNP_PGCS_CSLINE_CONF(2, CONFIG_SYS_NS87308_CS2_CONF);
 #endif
 }
diff --git a/drivers/mmc/atmel_mci.c b/drivers/mmc/atmel_mci.c
index a151488d1..3aa92f26e 100644
--- a/drivers/mmc/atmel_mci.c
+++ b/drivers/mmc/atmel_mci.c
@@ -38,16 +38,16 @@
 #define pr_debug(...) do { } while(0)
 #endif
 
-#ifndef CFG_MMC_CLK_OD
-#define CFG_MMC_CLK_OD		150000
+#ifndef CONFIG_SYS_MMC_CLK_OD
+#define CONFIG_SYS_MMC_CLK_OD		150000
 #endif
 
-#ifndef CFG_MMC_CLK_PP
-#define CFG_MMC_CLK_PP		5000000
+#ifndef CONFIG_SYS_MMC_CLK_PP
+#define CONFIG_SYS_MMC_CLK_PP		5000000
 #endif
 
-#ifndef CFG_MMC_OP_COND
-#define CFG_MMC_OP_COND		0x00100000
+#ifndef CONFIG_SYS_MMC_OP_COND
+#define CONFIG_SYS_MMC_OP_COND		0x00100000
 #endif
 
 #define MMC_DEFAULT_BLKLEN	512
@@ -349,7 +349,7 @@ static int sd_init_card(struct mmc_cid *cid, int verbose)
 
 	mmc_idle_cards();
 	for (i = 0; i < 1000; i++) {
-		ret = mmc_acmd(SD_CMD_APP_SEND_OP_COND, CFG_MMC_OP_COND,
+		ret = mmc_acmd(SD_CMD_APP_SEND_OP_COND, CONFIG_SYS_MMC_OP_COND,
 			       resp, R3 | NID);
 		if (ret || (resp[0] & 0x80000000))
 			break;
@@ -385,7 +385,7 @@ static int mmc_init_card(struct mmc_cid *cid, int verbose)
 
 	mmc_idle_cards();
 	for (i = 0; i < 1000; i++) {
-		ret = mmc_cmd(MMC_CMD_SEND_OP_COND, CFG_MMC_OP_COND, resp,
+		ret = mmc_cmd(MMC_CMD_SEND_OP_COND, CONFIG_SYS_MMC_OP_COND, resp,
 			      R3 | NID | OPEN_DRAIN);
 		if (ret || (resp[0] & 0x80000000))
 			break;
@@ -434,7 +434,7 @@ static void mci_set_data_timeout(struct mmc_csd *csd)
 	timeout_clks = csd->nsac * 100;
 
 	timeout_clks += (((timeout_ns + 9) / 10)
-			 * ((CFG_MMC_CLK_PP + 99999) / 100000) + 9999) / 10000;
+			 * ((CONFIG_SYS_MMC_CLK_PP + 99999) / 100000) + 9999) / 10000;
 	if (!mmc_card_is_sd)
 		timeout_clks *= 10;
 	else
@@ -475,7 +475,7 @@ int mmc_init(int verbose)
 	mmci_writel(CR, MMCI_BIT(MCIEN));
 	mmci_writel(DTOR, 0x5f);
 	mmci_writel(IDR, ~0UL);
-	mci_set_mode(CFG_MMC_CLK_OD, MMC_DEFAULT_BLKLEN);
+	mci_set_mode(CONFIG_SYS_MMC_CLK_OD, MMC_DEFAULT_BLKLEN);
 
 	mmc_card_is_sd = 0;
 
@@ -520,7 +520,7 @@ int mmc_init(int verbose)
 	mmc_blkdev.blksz = 512;
 	mmc_blkdev.lba = (csd.c_size + 1) * (1 << (csd.c_size_mult + 2));
 
-	mci_set_mode(CFG_MMC_CLK_PP, mmc_blkdev.blksz);
+	mci_set_mode(CONFIG_SYS_MMC_CLK_PP, mmc_blkdev.blksz);
 
 #if 0
 	if (fat_register_device(&mmc_blkdev, 1))
diff --git a/drivers/mtd/Makefile b/drivers/mtd/Makefile
index 6538f7a15..b665a97f1 100644
--- a/drivers/mtd/Makefile
+++ b/drivers/mtd/Makefile
@@ -25,8 +25,10 @@ include $(TOPDIR)/config.mk
 
 LIB	:= $(obj)libmtd.a
 
+COBJS-$(CONFIG_CMD_UBI) += mtdcore.o mtdpart.o
 COBJS-$(CONFIG_HAS_DATAFLASH) += at45.o
 COBJS-$(CONFIG_FLASH_CFI_DRIVER) += cfi_flash.o
+COBJS-$(CONFIG_FLASH_CFI_MTD) += cfi_mtd.o
 COBJS-$(CONFIG_HAS_DATAFLASH) += dataflash.o
 COBJS-$(CONFIG_FLASH_CFI_LEGACY) += jedec_flash.o
 COBJS-$(CONFIG_MW_EEPROM) += mw_eeprom.o
diff --git a/drivers/mtd/cfi_flash.c b/drivers/mtd/cfi_flash.c
index 03ea2d040..e8afe9985 100644
--- a/drivers/mtd/cfi_flash.c
+++ b/drivers/mtd/cfi_flash.c
@@ -57,12 +57,12 @@
  * AMD/Spansion Application Note: Migration from Single-byte to Three-byte
  *   Device IDs, Publication Number 25538 Revision A, November 8, 2001
  *
- * Define CFG_WRITE_SWAPPED_DATA, if you have to swap the Bytes between
+ * Define CONFIG_SYS_WRITE_SWAPPED_DATA, if you have to swap the Bytes between
  * reading and writing ... (yes there is such a Hardware).
  */
 
-#ifndef CFG_FLASH_BANKS_LIST
-#define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE }
+#ifndef CONFIG_SYS_FLASH_BANKS_LIST
+#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE }
 #endif
 
 #define FLASH_CMD_CFI			0x98
@@ -143,7 +143,7 @@
 #define CFI_CMDSET_SST			258
 #define CFI_CMDSET_INTEL_PROG_REGIONS	512
 
-#ifdef CFG_FLASH_CFI_AMD_RESET /* needed for STM_ID_29W320DB on UC100 */
+#ifdef CONFIG_SYS_FLASH_CFI_AMD_RESET /* needed for STM_ID_29W320DB on UC100 */
 # undef  FLASH_CMD_RESET
 # define FLASH_CMD_RESET	AMD_CMD_RESET /* use AMD-Reset instead */
 #endif
@@ -158,12 +158,13 @@ typedef union {
 #define NUM_ERASE_REGIONS	4 /* max. number of erase regions */
 
 static uint flash_offset_cfi[2] = { FLASH_OFFSET_CFI, FLASH_OFFSET_CFI_ALT };
+static uint flash_verbose = 1;
 
-/* use CFG_MAX_FLASH_BANKS_DETECT if defined */
-#ifdef CFG_MAX_FLASH_BANKS_DETECT
-# define CFI_MAX_FLASH_BANKS	CFG_MAX_FLASH_BANKS_DETECT
+/* use CONFIG_SYS_MAX_FLASH_BANKS_DETECT if defined */
+#ifdef CONFIG_SYS_MAX_FLASH_BANKS_DETECT
+# define CFI_MAX_FLASH_BANKS	CONFIG_SYS_MAX_FLASH_BANKS_DETECT
 #else
-# define CFI_MAX_FLASH_BANKS	CFG_MAX_FLASH_BANKS
+# define CFI_MAX_FLASH_BANKS	CONFIG_SYS_MAX_FLASH_BANKS
 #endif
 
 flash_info_t flash_info[CFI_MAX_FLASH_BANKS];	/* FLASH chips info */
@@ -171,12 +172,10 @@ flash_info_t flash_info[CFI_MAX_FLASH_BANKS];	/* FLASH chips info */
 /*
  * Check if chip width is defined. If not, start detecting with 8bit.
  */
-#ifndef CFG_FLASH_CFI_WIDTH
-#define CFG_FLASH_CFI_WIDTH	FLASH_CFI_8BIT
+#ifndef CONFIG_SYS_FLASH_CFI_WIDTH
+#define CONFIG_SYS_FLASH_CFI_WIDTH	FLASH_CFI_8BIT
 #endif
 
-typedef unsigned long flash_sect_t;
-
 /* CFI standard query structure */
 struct cfi_qry {
 	u8	qry[3];
@@ -209,38 +208,38 @@ struct cfi_pri_hdr {
 	u8	minor_version;
 } __attribute__((packed));
 
-static void flash_write8(u8 value, void *addr)
+static void __flash_write8(u8 value, void *addr)
 {
 	__raw_writeb(value, addr);
 }
 
-static void flash_write16(u16 value, void *addr)
+static void __flash_write16(u16 value, void *addr)
 {
 	__raw_writew(value, addr);
 }
 
-static void flash_write32(u32 value, void *addr)
+static void __flash_write32(u32 value, void *addr)
 {
 	__raw_writel(value, addr);
 }
 
-static void flash_write64(u64 value, void *addr)
+static void __flash_write64(u64 value, void *addr)
 {
 	/* No architectures currently implement __raw_writeq() */
 	*(volatile u64 *)addr = value;
 }
 
-static u8 flash_read8(void *addr)
+static u8 __flash_read8(void *addr)
 {
 	return __raw_readb(addr);
 }
 
-static u16 flash_read16(void *addr)
+static u16 __flash_read16(void *addr)
 {
 	return __raw_readw(addr);
 }
 
-static u32 flash_read32(void *addr)
+static u32 __flash_read32(void *addr)
 {
 	return __raw_readl(addr);
 }
@@ -251,24 +250,42 @@ static u64 __flash_read64(void *addr)
 	return *(volatile u64 *)addr;
 }
 
+#ifdef CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS
+void flash_write8(u8 value, void *addr)__attribute__((weak, alias("__flash_write8")));
+void flash_write16(u16 value, void *addr)__attribute__((weak, alias("__flash_write16")));
+void flash_write32(u32 value, void *addr)__attribute__((weak, alias("__flash_write32")));
+void flash_write64(u64 value, void *addr)__attribute__((weak, alias("__flash_write64")));
+u8 flash_read8(void *addr)__attribute__((weak, alias("__flash_read8")));
+u16 flash_read16(void *addr)__attribute__((weak, alias("__flash_read16")));
+u32 flash_read32(void *addr)__attribute__((weak, alias("__flash_read32")));
 u64 flash_read64(void *addr)__attribute__((weak, alias("__flash_read64")));
+#else
+#define flash_write8	__flash_write8
+#define flash_write16	__flash_write16
+#define flash_write32	__flash_write32
+#define flash_write64	__flash_write64
+#define flash_read8	__flash_read8
+#define flash_read16	__flash_read16
+#define flash_read32	__flash_read32
+#define flash_read64	__flash_read64
+#endif
 
 /*-----------------------------------------------------------------------
  */
-#if defined(CFG_ENV_IS_IN_FLASH) || defined(CFG_ENV_ADDR_REDUND) || (CFG_MONITOR_BASE >= CFG_FLASH_BASE)
+#if defined(CONFIG_ENV_IS_IN_FLASH) || defined(CONFIG_ENV_ADDR_REDUND) || (CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE)
 static flash_info_t *flash_get_info(ulong base)
 {
 	int i;
 	flash_info_t * info = 0;
 
-	for (i = 0; i < CFG_MAX_FLASH_BANKS; i++) {
+	for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) {
 		info = & flash_info[i];
 		if (info->size && info->start[0] <= base &&
 		    base <= info->start[0] + info->size - 1)
 			break;
 	}
 
-	return i == CFG_MAX_FLASH_BANKS ? 0 : info;
+	return i == CONFIG_SYS_MAX_FLASH_BANKS ? 0 : info;
 }
 #endif
 
@@ -309,7 +326,7 @@ static void flash_make_cmd(flash_info_t *info, u32 cmd, void *cmdbuf)
 	int i;
 	int cword_offset;
 	int cp_offset;
-#if defined(__LITTLE_ENDIAN) || defined(CFG_WRITE_SWAPPED_DATA)
+#if defined(__LITTLE_ENDIAN) || defined(CONFIG_SYS_WRITE_SWAPPED_DATA)
 	u32 cmd_le = cpu_to_le32(cmd);
 #endif
 	uchar val;
@@ -317,7 +334,7 @@ static void flash_make_cmd(flash_info_t *info, u32 cmd, void *cmdbuf)
 
 	for (i = info->portwidth; i > 0; i--){
 		cword_offset = (info->portwidth-i)%info->chipwidth;
-#if defined(__LITTLE_ENDIAN) || defined(CFG_WRITE_SWAPPED_DATA)
+#if defined(__LITTLE_ENDIAN) || defined(CONFIG_SYS_WRITE_SWAPPED_DATA)
 		cp_offset = info->portwidth - i;
 		val = *((uchar*)&cmd_le + cword_offset);
 #else
@@ -374,7 +391,7 @@ static inline uchar flash_read_uchar (flash_info_t * info, uint offset)
 	uchar retval;
 
 	cp = flash_map (info, 0, offset);
-#if defined(__LITTLE_ENDIAN) || defined(CFG_WRITE_SWAPPED_DATA)
+#if defined(__LITTLE_ENDIAN) || defined(CONFIG_SYS_WRITE_SWAPPED_DATA)
 	retval = flash_read8(cp);
 #else
 	retval = flash_read8(cp + info->portwidth - 1);
@@ -419,7 +436,7 @@ static ulong flash_read_long (flash_info_t * info, flash_sect_t sect,
 		debug ("addr[%x] = 0x%x\n", x, flash_read8(addr + x));
 	}
 #endif
-#if defined(__LITTLE_ENDIAN) || defined(CFG_WRITE_SWAPPED_DATA)
+#if defined(__LITTLE_ENDIAN) || defined(CONFIG_SYS_WRITE_SWAPPED_DATA)
 	retval = ((flash_read8(addr) << 16) |
 		  (flash_read8(addr + info->portwidth) << 24) |
 		  (flash_read8(addr + 2 * info->portwidth)) |
@@ -516,7 +533,7 @@ static int flash_isequal (flash_info_t * info, flash_sect_t sect,
 		retval = (flash_read16(addr) == cword.w);
 		break;
 	case FLASH_CFI_32BIT:
-		debug ("is= %8.8lx %8.8lx\n", flash_read32(addr), cword.l);
+		debug ("is= %8.8x %8.8lx\n", flash_read32(addr), cword.l);
 		retval = (flash_read32(addr) == cword.l);
 		break;
 	case FLASH_CFI_64BIT:
@@ -596,7 +613,8 @@ static int flash_toggle (flash_info_t * info, flash_sect_t sect,
 		retval = flash_read32(addr) != flash_read32(addr);
 		break;
 	case FLASH_CFI_64BIT:
-		retval = flash_read64(addr) != flash_read64(addr);
+		retval = ( (flash_read32( addr ) != flash_read32( addr )) ||
+			   (flash_read32(addr+4) != flash_read32(addr+4)) );
 		break;
 	default:
 		retval = 0;
@@ -646,8 +664,8 @@ static int flash_status_check (flash_info_t * info, flash_sect_t sector,
 {
 	ulong start;
 
-#if CFG_HZ != 1000
-	tout *= CFG_HZ/1000;
+#if CONFIG_SYS_HZ != 1000
+	tout *= CONFIG_SYS_HZ/1000;
 #endif
 
 	/* Wait for command completion */
@@ -681,7 +699,7 @@ static int flash_full_status_check (flash_info_t * info, flash_sect_t sector,
 	case CFI_CMDSET_INTEL_PROG_REGIONS:
 	case CFI_CMDSET_INTEL_EXTENDED:
 	case CFI_CMDSET_INTEL_STANDARD:
-		if ((retcode == ERR_OK)
+		if ((retcode != ERR_OK)
 		    && !flash_isequal (info, sector, 0, FLASH_STATUS_DONE)) {
 			retcode = ERR_INVAL;
 			printf ("Flash %s error at address %lx\n", prompt,
@@ -716,7 +734,7 @@ static int flash_full_status_check (flash_info_t * info, flash_sect_t sector,
  */
 static void flash_add_byte (flash_info_t * info, cfiword_t * cword, uchar c)
 {
-#if defined(__LITTLE_ENDIAN) && !defined(CFG_WRITE_SWAPPED_DATA)
+#if defined(__LITTLE_ENDIAN) && !defined(CONFIG_SYS_WRITE_SWAPPED_DATA)
 	unsigned short	w;
 	unsigned int	l;
 	unsigned long long ll;
@@ -727,7 +745,7 @@ static void flash_add_byte (flash_info_t * info, cfiword_t * cword, uchar c)
 		cword->c = c;
 		break;
 	case FLASH_CFI_16BIT:
-#if defined(__LITTLE_ENDIAN) && !defined(CFG_WRITE_SWAPPED_DATA)
+#if defined(__LITTLE_ENDIAN) && !defined(CONFIG_SYS_WRITE_SWAPPED_DATA)
 		w = c;
 		w <<= 8;
 		cword->w = (cword->w >> 8) | w;
@@ -736,7 +754,7 @@ static void flash_add_byte (flash_info_t * info, cfiword_t * cword, uchar c)
 #endif
 		break;
 	case FLASH_CFI_32BIT:
-#if defined(__LITTLE_ENDIAN) && !defined(CFG_WRITE_SWAPPED_DATA)
+#if defined(__LITTLE_ENDIAN) && !defined(CONFIG_SYS_WRITE_SWAPPED_DATA)
 		l = c;
 		l <<= 24;
 		cword->l = (cword->l >> 8) | l;
@@ -745,7 +763,7 @@ static void flash_add_byte (flash_info_t * info, cfiword_t * cword, uchar c)
 #endif
 		break;
 	case FLASH_CFI_64BIT:
-#if defined(__LITTLE_ENDIAN) && !defined(CFG_WRITE_SWAPPED_DATA)
+#if defined(__LITTLE_ENDIAN) && !defined(CONFIG_SYS_WRITE_SWAPPED_DATA)
 		ll = c;
 		ll <<= 56;
 		cword->ll = (cword->ll >> 8) | ll;
@@ -777,6 +795,7 @@ static int flash_write_cfiword (flash_info_t * info, ulong dest,
 {
 	void *dstaddr;
 	int flag;
+	flash_sect_t sect;
 
 	dstaddr = map_physmem(dest, info->portwidth, MAP_NOCACHE);
 
@@ -818,8 +837,9 @@ static int flash_write_cfiword (flash_info_t * info, ulong dest,
 #ifdef CONFIG_FLASH_CFI_LEGACY
 	case CFI_CMDSET_AMD_LEGACY:
 #endif
-		flash_unlock_seq (info, 0);
-		flash_write_cmd (info, 0, info->addr_unlock1, AMD_CMD_WRITE);
+		sect = find_sector(info, dest);
+		flash_unlock_seq (info, sect);
+		flash_write_cmd (info, sect, info->addr_unlock1, AMD_CMD_WRITE);
 		break;
 	}
 
@@ -848,7 +868,7 @@ static int flash_write_cfiword (flash_info_t * info, ulong dest,
 					info->write_tout, "write");
 }
 
-#ifdef CFG_FLASH_USE_BUFFER_WRITE
+#ifdef CONFIG_SYS_FLASH_USE_BUFFER_WRITE
 
 static int flash_write_cfibuffer (flash_info_t * info, ulong dest, uchar * cp,
 				  int len)
@@ -1022,7 +1042,7 @@ out_unmap:
 	unmap_physmem(dst, len);
 	return retcode;
 }
-#endif /* CFG_FLASH_USE_BUFFER_WRITE */
+#endif /* CONFIG_SYS_FLASH_USE_BUFFER_WRITE */
 
 
 /*-----------------------------------------------------------------------
@@ -1051,7 +1071,7 @@ int flash_erase (flash_info_t * info, int s_first, int s_last)
 	if (prot) {
 		printf ("- Warning: %d protected sectors will not be erased!\n",
 			prot);
-	} else {
+	} else if (flash_verbose) {
 		putc ('\n');
 	}
 
@@ -1098,11 +1118,14 @@ int flash_erase (flash_info_t * info, int s_first, int s_last)
 			if (flash_full_status_check
 			    (info, sect, info->erase_blk_tout, "erase")) {
 				rcode = 1;
-			} else
+			} else if (flash_verbose)
 				putc ('.');
 		}
 	}
-	puts (" done\n");
+
+	if (flash_verbose)
+		puts (" done\n");
+
 	return rcode;
 }
 
@@ -1171,7 +1194,7 @@ void flash_print_info (flash_info_t * info)
 	for (i = 0; i < info->sector_count; ++i) {
 		if ((i % 5) == 0)
 			printf ("\n");
-#ifdef CFG_FLASH_EMPTY_INFO
+#ifdef CONFIG_SYS_FLASH_EMPTY_INFO
 		int k;
 		int size;
 		int erased;
@@ -1196,7 +1219,7 @@ void flash_print_info (flash_info_t * info)
 			info->start[i],
 			erased ? 'E' : ' ',
 			info->protect[i] ? "RO" : "  ");
-#else	/* ! CFG_FLASH_EMPTY_INFO */
+#else	/* ! CONFIG_SYS_FLASH_EMPTY_INFO */
 		printf ("  %08lX   %s ",
 			info->start[i],
 			info->protect[i] ? "RO" : "  ");
@@ -1214,14 +1237,16 @@ void flash_print_info (flash_info_t * info)
  */
 #ifdef CONFIG_FLASH_SHOW_PROGRESS
 #define FLASH_SHOW_PROGRESS(scale, dots, digit, dots_sub) \
-	dots -= dots_sub; \
-	if ((scale > 0) && (dots <= 0)) { \
-		if ((digit % 5) == 0) \
-			printf ("%d", digit / 5); \
-		else \
-			putc ('.'); \
-		digit--; \
-		dots += scale; \
+	if (flash_verbose) { \
+		dots -= dots_sub; \
+		if ((scale > 0) && (dots <= 0)) { \
+			if ((digit % 5) == 0) \
+				printf ("%d", digit / 5); \
+			else \
+				putc ('.'); \
+			digit--; \
+			dots += scale; \
+		} \
 	}
 #else
 #define FLASH_SHOW_PROGRESS(scale, dots, digit, dots_sub)
@@ -1240,7 +1265,7 @@ int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
 	int aln;
 	cfiword_t cword;
 	int i, rc;
-#ifdef CFG_FLASH_USE_BUFFER_WRITE
+#ifdef CONFIG_SYS_FLASH_USE_BUFFER_WRITE
 	int buffered_size;
 #endif
 #ifdef CONFIG_FLASH_SHOW_PROGRESS
@@ -1284,7 +1309,7 @@ int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
 	}
 
 	/* handle the aligned part */
-#ifdef CFG_FLASH_USE_BUFFER_WRITE
+#ifdef CONFIG_SYS_FLASH_USE_BUFFER_WRITE
 	buffered_size = (info->portwidth / info->chipwidth);
 	buffered_size *= info->buffer_size;
 	while (cnt >= info->portwidth) {
@@ -1324,7 +1349,7 @@ int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
 		cnt -= info->portwidth;
 		FLASH_SHOW_PROGRESS(scale, dots, digit, info->portwidth);
 	}
-#endif /* CFG_FLASH_USE_BUFFER_WRITE */
+#endif /* CONFIG_SYS_FLASH_USE_BUFFER_WRITE */
 
 	if (cnt == 0) {
 		return (0);
@@ -1348,7 +1373,7 @@ int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
 
 /*-----------------------------------------------------------------------
  */
-#ifdef CFG_FLASH_PROTECTION
+#ifdef CONFIG_SYS_FLASH_PROTECTION
 
 int flash_real_protect (flash_info_t * info, long sector, int prot)
 {
@@ -1455,7 +1480,7 @@ void flash_read_factory_serial (flash_info_t * info, void *buffer, int offset,
 	flash_unmap(info, 0, FLASH_OFFSET_INTEL_PROTECTION, src);
 }
 
-#endif /* CFG_FLASH_PROTECTION */
+#endif /* CONFIG_SYS_FLASH_PROTECTION */
 
 /*-----------------------------------------------------------------------
  * Reverse the order of the erase regions in the CFI QRY structure.
@@ -1499,7 +1524,7 @@ static int cmdset_intel_init(flash_info_t *info, struct cfi_qry *qry)
 	cmdset_intel_read_jedec_ids(info);
 	flash_write_cmd(info, 0, info->cfi_offset, FLASH_CMD_CFI);
 
-#ifdef CFG_FLASH_PROTECTION
+#ifdef CONFIG_SYS_FLASH_PROTECTION
 	/* read legacy lock/unlock bit from intel flash */
 	if (info->ext_addr) {
 		info->legacy_unlock = flash_read_uchar (info,
@@ -1715,7 +1740,7 @@ static int flash_detect_cfi (flash_info_t * info, struct cfi_qry *qry)
 {
 	debug ("flash detect cfi\n");
 
-	for (info->portwidth = CFG_FLASH_CFI_WIDTH;
+	for (info->portwidth = CONFIG_SYS_FLASH_CFI_WIDTH;
 	     info->portwidth <= FLASH_CFI_64BIT; info->portwidth <<= 1) {
 		for (info->chipwidth = FLASH_CFI_BY8;
 		     info->chipwidth <= info->portwidth;
@@ -1791,7 +1816,7 @@ ulong flash_get_size (ulong base, int banknum)
 
 	info->ext_addr = 0;
 	info->cfi_version = 0;
-#ifdef CFG_FLASH_PROTECTION
+#ifdef CONFIG_SYS_FLASH_PROTECTION
 	info->legacy_unlock = 0;
 #endif
 
@@ -1880,7 +1905,7 @@ ulong flash_get_size (ulong base, int banknum)
 			debug ("erase_region_count = %d erase_region_size = %d\n",
 				erase_region_count, erase_region_size);
 			for (j = 0; j < erase_region_count; j++) {
-				if (sect_cnt >= CFG_MAX_FLASH_SECT) {
+				if (sect_cnt >= CONFIG_SYS_MAX_FLASH_SECT) {
 					printf("ERROR: too many flash sectors\n");
 					break;
 				}
@@ -1932,53 +1957,59 @@ ulong flash_get_size (ulong base, int banknum)
 			/* XXX - Need to test on x8/x16 in parallel. */
 			info->portwidth >>= 1;
 		}
+
+		flash_write_cmd (info, 0, 0, info->cmd_reset);
 	}
 
-	flash_write_cmd (info, 0, 0, info->cmd_reset);
 	return (info->size);
 }
 
+void flash_set_verbose(uint v)
+{
+	flash_verbose = v;
+}
+
 /*-----------------------------------------------------------------------
  */
 unsigned long flash_init (void)
 {
 	unsigned long size = 0;
 	int i;
-#if defined(CFG_FLASH_AUTOPROTECT_LIST)
+#if defined(CONFIG_SYS_FLASH_AUTOPROTECT_LIST)
 	struct apl_s {
 		ulong start;
 		ulong size;
-	} apl[] = CFG_FLASH_AUTOPROTECT_LIST;
+	} apl[] = CONFIG_SYS_FLASH_AUTOPROTECT_LIST;
 #endif
 
-#ifdef CFG_FLASH_PROTECTION
+#ifdef CONFIG_SYS_FLASH_PROTECTION
 	char *s = getenv("unlock");
 #endif
 
-#define BANK_BASE(i)	(((unsigned long [CFI_MAX_FLASH_BANKS])CFG_FLASH_BANKS_LIST)[i])
+#define BANK_BASE(i)	(((unsigned long [CFI_MAX_FLASH_BANKS])CONFIG_SYS_FLASH_BANKS_LIST)[i])
 
 	/* Init: no FLASHes known */
-	for (i = 0; i < CFG_MAX_FLASH_BANKS; ++i) {
+	for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
 		flash_info[i].flash_id = FLASH_UNKNOWN;
 
 		if (!flash_detect_legacy (BANK_BASE(i), i))
 			flash_get_size (BANK_BASE(i), i);
 		size += flash_info[i].size;
 		if (flash_info[i].flash_id == FLASH_UNKNOWN) {
-#ifndef CFG_FLASH_QUIET_TEST
+#ifndef CONFIG_SYS_FLASH_QUIET_TEST
 			printf ("## Unknown FLASH on Bank %d "
 				"- Size = 0x%08lx = %ld MB\n",
 				i+1, flash_info[i].size,
 				flash_info[i].size << 20);
-#endif /* CFG_FLASH_QUIET_TEST */
+#endif /* CONFIG_SYS_FLASH_QUIET_TEST */
 		}
-#ifdef CFG_FLASH_PROTECTION
+#ifdef CONFIG_SYS_FLASH_PROTECTION
 		else if ((s != NULL) && (strcmp(s, "yes") == 0)) {
 			/*
 			 * Only the U-Boot image and it's environment
 			 * is protected, all other sectors are
 			 * unprotected (unlocked) if flash hardware
-			 * protection is used (CFG_FLASH_PROTECTION)
+			 * protection is used (CONFIG_SYS_FLASH_PROTECTION)
 			 * and the environment variable "unlock" is
 			 * set to "yes".
 			 */
@@ -2019,34 +2050,34 @@ unsigned long flash_init (void)
 					       &flash_info[i]);
 			}
 		}
-#endif /* CFG_FLASH_PROTECTION */
+#endif /* CONFIG_SYS_FLASH_PROTECTION */
 	}
 
 	/* Monitor protection ON by default */
-#if (CFG_MONITOR_BASE >= CFG_FLASH_BASE)
+#if (CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE)
 	flash_protect (FLAG_PROTECT_SET,
-		       CFG_MONITOR_BASE,
-		       CFG_MONITOR_BASE + monitor_flash_len  - 1,
-		       flash_get_info(CFG_MONITOR_BASE));
+		       CONFIG_SYS_MONITOR_BASE,
+		       CONFIG_SYS_MONITOR_BASE + monitor_flash_len  - 1,
+		       flash_get_info(CONFIG_SYS_MONITOR_BASE));
 #endif
 
 	/* Environment protection ON by default */
-#ifdef CFG_ENV_IS_IN_FLASH
+#ifdef CONFIG_ENV_IS_IN_FLASH
 	flash_protect (FLAG_PROTECT_SET,
-		       CFG_ENV_ADDR,
-		       CFG_ENV_ADDR + CFG_ENV_SECT_SIZE - 1,
-		       flash_get_info(CFG_ENV_ADDR));
+		       CONFIG_ENV_ADDR,
+		       CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE - 1,
+		       flash_get_info(CONFIG_ENV_ADDR));
 #endif
 
 	/* Redundant environment protection ON by default */
-#ifdef CFG_ENV_ADDR_REDUND
+#ifdef CONFIG_ENV_ADDR_REDUND
 	flash_protect (FLAG_PROTECT_SET,
-		       CFG_ENV_ADDR_REDUND,
-		       CFG_ENV_ADDR_REDUND + CFG_ENV_SIZE_REDUND - 1,
-		       flash_get_info(CFG_ENV_ADDR_REDUND));
+		       CONFIG_ENV_ADDR_REDUND,
+		       CONFIG_ENV_ADDR_REDUND + CONFIG_ENV_SIZE_REDUND - 1,
+		       flash_get_info(CONFIG_ENV_ADDR_REDUND));
 #endif
 
-#if defined(CFG_FLASH_AUTOPROTECT_LIST)
+#if defined(CONFIG_SYS_FLASH_AUTOPROTECT_LIST)
 	for (i = 0; i < (sizeof(apl) / sizeof(struct apl_s)); i++) {
 		debug("autoprotecting from %08x to %08x\n",
 		      apl[i].start, apl[i].start + apl[i].size - 1);
@@ -2056,5 +2087,10 @@ unsigned long flash_init (void)
 			       flash_get_info(apl[i].start));
 	}
 #endif
+
+#ifdef CONFIG_FLASH_CFI_MTD
+	cfi_mtd_init();
+#endif
+
 	return (size);
 }
diff --git a/drivers/mtd/cfi_mtd.c b/drivers/mtd/cfi_mtd.c
new file mode 100644
index 000000000..cf82d9278
--- /dev/null
+++ b/drivers/mtd/cfi_mtd.c
@@ -0,0 +1,202 @@
+/*
+ * (C) Copyright 2008 Semihalf
+ *
+ * Written by: Piotr Ziecik <kosmo@semihalf.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+#include <common.h>
+#include <flash.h>
+
+#include <asm/errno.h>
+#include <linux/mtd/mtd.h>
+
+extern flash_info_t flash_info[];
+
+static struct mtd_info cfi_mtd_info[CONFIG_SYS_MAX_FLASH_BANKS];
+
+static int cfi_mtd_erase(struct mtd_info *mtd, struct erase_info *instr)
+{
+	flash_info_t *fi = mtd->priv;
+	size_t a_start = fi->start[0] + instr->addr;
+	size_t a_end = a_start + instr->len;
+	int s_first = -1;
+	int s_last = -1;
+	int error, sect;
+
+	for (sect = 0; sect < fi->sector_count - 1; sect++) {
+		if (a_start == fi->start[sect])
+			s_first = sect;
+
+		if (a_end == fi->start[sect + 1]) {
+			s_last = sect;
+			break;
+		}
+	}
+
+	if (s_first >= 0 && s_first <= s_last) {
+		instr->state = MTD_ERASING;
+
+		flash_set_verbose(0);
+		error = flash_erase(fi, s_first, s_last);
+		flash_set_verbose(1);
+
+		if (error) {
+			instr->state = MTD_ERASE_FAILED;
+			return -EIO;
+		}
+
+		instr->state = MTD_ERASE_DONE;
+		mtd_erase_callback(instr);
+		return 0;
+	}
+
+	return -EINVAL;
+}
+
+static int cfi_mtd_read(struct mtd_info *mtd, loff_t from, size_t len,
+	size_t *retlen, u_char *buf)
+{
+	flash_info_t *fi = mtd->priv;
+	u_char *f = (u_char*)(fi->start[0]) + from;
+
+	memcpy(buf, f, len);
+	*retlen = len;
+
+	return 0;
+}
+
+static int cfi_mtd_write(struct mtd_info *mtd, loff_t to, size_t len,
+	size_t *retlen, const u_char *buf)
+{
+	flash_info_t *fi = mtd->priv;
+	u_long t = fi->start[0] + to;
+	int error;
+
+	flash_set_verbose(0);
+	error = write_buff(fi, (u_char*)buf, t, len);
+	flash_set_verbose(1);
+
+	if (!error) {
+		*retlen = len;
+		return 0;
+	}
+
+	return -EIO;
+}
+
+static void cfi_mtd_sync(struct mtd_info *mtd)
+{
+	/*
+	 * This function should wait until all pending operations
+	 * finish. However this driver is fully synchronous, so
+	 * this function returns immediately
+	 */
+}
+
+static int cfi_mtd_lock(struct mtd_info *mtd, loff_t ofs, size_t len)
+{
+	flash_info_t *fi = mtd->priv;
+
+	flash_set_verbose(0);
+	flash_protect(FLAG_PROTECT_SET, fi->start[0] + ofs,
+					fi->start[0] + ofs + len - 1, fi);
+	flash_set_verbose(1);
+
+	return 0;
+}
+
+static int cfi_mtd_unlock(struct mtd_info *mtd, loff_t ofs, size_t len)
+{
+	flash_info_t *fi = mtd->priv;
+
+	flash_set_verbose(0);
+	flash_protect(FLAG_PROTECT_CLEAR, fi->start[0] + ofs,
+					fi->start[0] + ofs + len - 1, fi);
+	flash_set_verbose(1);
+
+	return 0;
+}
+
+static int cfi_mtd_set_erasesize(struct mtd_info *mtd, flash_info_t *fi)
+{
+	int sect_size = 0;
+	int sect;
+
+	for (sect = 0; sect < fi->sector_count; sect++) {
+		if (!sect_size) {
+			sect_size = flash_sector_size(fi, sect);
+			continue;
+		}
+
+		if (sect_size != flash_sector_size(fi, sect)) {
+			sect_size = 0;
+			break;
+		}
+	}
+
+	if (!sect_size) {
+		puts("cfi-mtd: devices with multiple sector sizes are"
+							"not supported\n");
+		return -EINVAL;
+	}
+
+	mtd->erasesize = sect_size;
+
+	return 0;
+}
+
+int cfi_mtd_init(void)
+{
+	struct mtd_info *mtd;
+	flash_info_t *fi;
+	int error, i;
+
+	for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) {
+		fi = &flash_info[i];
+		mtd = &cfi_mtd_info[i];
+
+		memset(mtd, 0, sizeof(struct mtd_info));
+
+		error = cfi_mtd_set_erasesize(mtd, fi);
+		if (error)
+			continue;
+
+		mtd->name		= CFI_MTD_DEV_NAME;
+		mtd->type		= MTD_NORFLASH;
+		mtd->flags		= MTD_CAP_NORFLASH;
+		mtd->size		= fi->size;
+		mtd->writesize		= 1;
+
+		mtd->erase		= cfi_mtd_erase;
+		mtd->read		= cfi_mtd_read;
+		mtd->write		= cfi_mtd_write;
+		mtd->sync		= cfi_mtd_sync;
+		mtd->lock		= cfi_mtd_lock;
+		mtd->unlock		= cfi_mtd_unlock;
+		mtd->priv		= fi;
+
+		if (add_mtd_device(mtd))
+			return -ENOMEM;
+	}
+
+	return 0;
+}
diff --git a/drivers/mtd/dataflash.c b/drivers/mtd/dataflash.c
index 049da69fe..96cd395e7 100644
--- a/drivers/mtd/dataflash.c
+++ b/drivers/mtd/dataflash.c
@@ -40,12 +40,12 @@ int AT91F_DataflashInit (void)
 	int dfcode;
 	int part;
 	int last_part;
-	int found[CFG_MAX_DATAFLASH_BANKS];
+	int found[CONFIG_SYS_MAX_DATAFLASH_BANKS];
 	unsigned char protected;
 
 	AT91F_SpiInit ();
 
-	for (i = 0; i < CFG_MAX_DATAFLASH_BANKS; i++) {
+	for (i = 0; i < CONFIG_SYS_MAX_DATAFLASH_BANKS; i++) {
 		found[i] = 0;
 		dataflash_info[i].Desc.state = IDLE;
 		dataflash_info[i].id = 0;
@@ -131,14 +131,14 @@ int AT91F_DataflashInit (void)
 			break;
 		}
 		/* set the last area end to the dataflash size*/
-		area_list[NB_DATAFLASH_AREA -1].end =
+		dataflash_info[i].end_address =
 				(dataflash_info[i].Device.pages_number *
-				dataflash_info[i].Device.pages_size)-1;
+				dataflash_info[i].Device.pages_size) - 1;
 
 		part = 0;
 		last_part = 0;
 		/* set the area addresses */
-		for(j = 0; j<NB_DATAFLASH_AREA; j++) {
+		for(j = 0; j < NB_DATAFLASH_AREA; j++) {
 			if(found[i]!=0) {
 				dataflash_info[i].Device.area_list[j].start =
 					area_list[part].start +
@@ -146,7 +146,7 @@ int AT91F_DataflashInit (void)
 				if(area_list[part].end == 0xffffffff) {
 					dataflash_info[i].Device.area_list[j].end =
 						dataflash_info[i].end_address +
-						dataflash_info	[i].logical_address;
+						dataflash_info[i].logical_address;
 					last_part = 1;
 				} else {
 					dataflash_info[i].Device.area_list[j].end =
@@ -179,13 +179,12 @@ void AT91F_DataflashSetEnv (void)
 	unsigned char s[32];	/* Will fit a long int in hex */
 	unsigned long start;
 
-	for (i = 0, part= 0; i < CFG_MAX_DATAFLASH_BANKS; i++) {
-		for(j = 0; j<NB_DATAFLASH_AREA; j++) {
+	for (i = 0, part= 0; i < CONFIG_SYS_MAX_DATAFLASH_BANKS; i++) {
+		for(j = 0; j < NB_DATAFLASH_AREA; j++) {
 			env = area_list[part].setenv;
 			/* Set the environment according to the label...*/
 			if((env & FLAG_SETENV) == FLAG_SETENV) {
-				start =
-				dataflash_info[i].Device.area_list[j].start;
+				start = dataflash_info[i].Device.area_list[j].start;
 				sprintf((char*) s,"%lX",start);
 				setenv((char*) area_list[part].label,(char*) s);
 			}
@@ -198,7 +197,7 @@ void dataflash_print_info (void)
 {
 	int i, j;
 
-	for (i = 0; i < CFG_MAX_DATAFLASH_BANKS; i++) {
+	for (i = 0; i < CONFIG_SYS_MAX_DATAFLASH_BANKS; i++) {
 		if (dataflash_info[i].id != 0) {
 			printf("DataFlash:");
 			switch (dataflash_info[i].id) {
@@ -230,7 +229,7 @@ void dataflash_print_info (void)
 				(unsigned int) dataflash_info[i].Device.pages_number *
 				dataflash_info[i].Device.pages_size,
 				(unsigned int) dataflash_info[i].logical_address);
-			for (j=0; j< NB_DATAFLASH_AREA; j++) {
+			for (j = 0; j < NB_DATAFLASH_AREA; j++) {
 				switch(dataflash_info[i].Device.area_list[j].protected) {
 				case	FLAG_PROTECT_SET:
 				case	FLAG_PROTECT_CLEAR:
@@ -258,7 +257,7 @@ AT91PS_DataFlash AT91F_DataflashSelect (AT91PS_DataFlash pFlash,
 	char addr_valid = 0;
 	int i;
 
-	for (i = 0; i < CFG_MAX_DATAFLASH_BANKS; i++)
+	for (i = 0; i < CONFIG_SYS_MAX_DATAFLASH_BANKS; i++)
 		if ( dataflash_info[i].id
 			&& ((((int) *addr) & 0xFF000000) ==
 			dataflash_info[i].logical_address)) {
@@ -284,7 +283,7 @@ int addr_dataflash (unsigned long addr)
 	int addr_valid = 0;
 	int i;
 
-	for (i = 0; i < CFG_MAX_DATAFLASH_BANKS; i++) {
+	for (i = 0; i < CONFIG_SYS_MAX_DATAFLASH_BANKS; i++) {
 		if ((((int) addr) & 0xFF000000) ==
 			dataflash_info[i].logical_address) {
 			addr_valid = 1;
@@ -322,7 +321,7 @@ int prot_dataflash (AT91PS_DataFlash pdataFlash, unsigned long addr)
 	int area;
 
 	/* find area */
-	for (area=0; area < NB_DATAFLASH_AREA; area++) {
+	for (area = 0; area < NB_DATAFLASH_AREA; area++) {
 		if ((addr >= pdataFlash->pDevice->area_list[area].start) &&
 			(addr < pdataFlash->pDevice->area_list[area].end))
 			break;
@@ -349,7 +348,7 @@ int dataflash_real_protect (int flag, unsigned long start_addr,
 	int i,j, area1, area2, addr_valid = 0;
 
 	/* find dataflash */
-	for (i = 0; i < CFG_MAX_DATAFLASH_BANKS; i++) {
+	for (i = 0; i < CONFIG_SYS_MAX_DATAFLASH_BANKS; i++) {
 		if ((((int) start_addr) & 0xF0000000) ==
 			dataflash_info[i].logical_address) {
 				addr_valid = 1;
@@ -360,13 +359,13 @@ int dataflash_real_protect (int flag, unsigned long start_addr,
 		return -1;
 	}
 	/* find start area */
-	for (area1=0; area1 < NB_DATAFLASH_AREA; area1++) {
+	for (area1 = 0; area1 < NB_DATAFLASH_AREA; area1++) {
 		if (start_addr == dataflash_info[i].Device.area_list[area1].start)
 			break;
 	}
 	if (area1 == NB_DATAFLASH_AREA) return -1;
 	/* find end area */
-	for (area2=0; area2 < NB_DATAFLASH_AREA; area2++) {
+	for (area2 = 0; area2 < NB_DATAFLASH_AREA; area2++) {
 		if (end_addr == dataflash_info[i].Device.area_list[area2].end)
 			break;
 	}
@@ -374,7 +373,7 @@ int dataflash_real_protect (int flag, unsigned long start_addr,
 		return -1;
 
 	/*set protection value*/
-	for(j = area1; j < area2+1 ; j++)
+	for(j = area1; j < area2 + 1 ; j++)
 		if(dataflash_info[i].Device.area_list[j].protected
 				!= FLAG_PROTECT_INVALID) {
 			if (flag == 0) {
@@ -386,7 +385,7 @@ int dataflash_real_protect (int flag, unsigned long start_addr,
 			}
 		}
 
-	return (area2-area1+1);
+	return (area2 - area1 + 1);
 }
 
 /*---------------------------------------------------------------------------*/
diff --git a/drivers/mtd/jedec_flash.c b/drivers/mtd/jedec_flash.c
index 020647a7c..226e1e418 100644
--- a/drivers/mtd/jedec_flash.c
+++ b/drivers/mtd/jedec_flash.c
@@ -170,7 +170,7 @@ struct amd_flash_info {
 #define SIZE_8MiB   23
 
 static const struct amd_flash_info jedec_table[] = {
-#ifdef CFG_FLASH_LEGACY_256Kx8
+#ifdef CONFIG_SYS_FLASH_LEGACY_256Kx8
 	{
 		.mfr_id		= MANUFACTURER_SST,
 		.dev_id		= SST39LF020,
@@ -186,7 +186,7 @@ static const struct amd_flash_info jedec_table[] = {
 		}
 	},
 #endif
-#ifdef CFG_FLASH_LEGACY_512Kx8
+#ifdef CONFIG_SYS_FLASH_LEGACY_512Kx8
 	{
 		.mfr_id		= MANUFACTURER_AMD,
 		.dev_id		= AM29LV040B,
@@ -216,7 +216,7 @@ static const struct amd_flash_info jedec_table[] = {
 		}
 	},
 #endif
-#ifdef CFG_FLASH_LEGACY_512Kx16
+#ifdef CONFIG_SYS_FLASH_LEGACY_512Kx16
 	{
 		.mfr_id		= MANUFACTURER_AMD,
 		.dev_id		= AM29LV400BB,
@@ -307,7 +307,7 @@ static inline void fill_info(flash_info_t *info, const struct amd_flash_info *je
 		debug ("erase_region_count = %d erase_region_size = %d\n",
 		       erase_region_count, erase_region_size);
 		for (j = 0; j < erase_region_count; j++) {
-			if (sect_cnt >= CFG_MAX_FLASH_SECT) {
+			if (sect_cnt >= CONFIG_SYS_MAX_FLASH_SECT) {
 				printf("ERROR: too many flash sectors\n");
 				break;
 			}
diff --git a/drivers/mtd/mtdcore.c b/drivers/mtd/mtdcore.c
new file mode 100644
index 000000000..6eb52ed50
--- /dev/null
+++ b/drivers/mtd/mtdcore.c
@@ -0,0 +1,144 @@
+/*
+ * Core registration and callback routines for MTD
+ * drivers and users.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/compat.h>
+#include <ubi_uboot.h>
+
+struct mtd_info *mtd_table[MAX_MTD_DEVICES];
+
+int add_mtd_device(struct mtd_info *mtd)
+{
+	int i;
+
+	BUG_ON(mtd->writesize == 0);
+
+	for (i = 0; i < MAX_MTD_DEVICES; i++)
+		if (!mtd_table[i]) {
+			mtd_table[i] = mtd;
+			mtd->index = i;
+			mtd->usecount = 0;
+
+			/* No need to get a refcount on the module containing
+			   the notifier, since we hold the mtd_table_mutex */
+
+			/* We _know_ we aren't being removed, because
+			   our caller is still holding us here. So none
+			   of this try_ nonsense, and no bitching about it
+			   either. :) */
+			return 0;
+		}
+
+	return 1;
+}
+
+/**
+ *      del_mtd_device - unregister an MTD device
+ *      @mtd: pointer to MTD device info structure
+ *
+ *      Remove a device from the list of MTD devices present in the system,
+ *      and notify each currently active MTD 'user' of its departure.
+ *      Returns zero on success or 1 on failure, which currently will happen
+ *      if the requested device does not appear to be present in the list.
+ */
+int del_mtd_device(struct mtd_info *mtd)
+{
+	int ret;
+
+	if (mtd_table[mtd->index] != mtd) {
+		ret = -ENODEV;
+	} else if (mtd->usecount) {
+		printk(KERN_NOTICE "Removing MTD device #%d (%s)"
+				" with use count %d\n",
+				mtd->index, mtd->name, mtd->usecount);
+		ret = -EBUSY;
+	} else {
+		/* No need to get a refcount on the module containing
+		 * the notifier, since we hold the mtd_table_mutex */
+		mtd_table[mtd->index] = NULL;
+
+		ret = 0;
+	}
+
+	return ret;
+}
+
+/**
+ *	get_mtd_device - obtain a validated handle for an MTD device
+ *	@mtd: last known address of the required MTD device
+ *	@num: internal device number of the required MTD device
+ *
+ *	Given a number and NULL address, return the num'th entry in the device
+ *      table, if any.  Given an address and num == -1, search the device table
+ *      for a device with that address and return if it's still present. Given
+ *      both, return the num'th driver only if its address matches. Return
+ *      error code if not.
+ */
+struct mtd_info *get_mtd_device(struct mtd_info *mtd, int num)
+{
+	struct mtd_info *ret = NULL;
+	int i, err = -ENODEV;
+
+	if (num == -1) {
+		for (i = 0; i < MAX_MTD_DEVICES; i++)
+			if (mtd_table[i] == mtd)
+				ret = mtd_table[i];
+	} else if (num < MAX_MTD_DEVICES) {
+		ret = mtd_table[num];
+		if (mtd && mtd != ret)
+			ret = NULL;
+	}
+
+	if (!ret)
+		goto out_unlock;
+
+	ret->usecount++;
+	return ret;
+
+out_unlock:
+	return ERR_PTR(err);
+}
+
+/**
+ *      get_mtd_device_nm - obtain a validated handle for an MTD device by
+ *      device name
+ *      @name: MTD device name to open
+ *
+ *      This function returns MTD device description structure in case of
+ *      success and an error code in case of failure.
+ */
+struct mtd_info *get_mtd_device_nm(const char *name)
+{
+	int i, err = -ENODEV;
+	struct mtd_info *mtd = NULL;
+
+	for (i = 0; i < MAX_MTD_DEVICES; i++) {
+		if (mtd_table[i] && !strcmp(name, mtd_table[i]->name)) {
+			mtd = mtd_table[i];
+			break;
+		}
+	}
+
+	if (!mtd)
+		goto out_unlock;
+
+	mtd->usecount++;
+	return mtd;
+
+out_unlock:
+	return ERR_PTR(err);
+}
+
+void put_mtd_device(struct mtd_info *mtd)
+{
+	int c;
+
+	c = --mtd->usecount;
+	BUG_ON(c < 0);
+}
diff --git a/drivers/mtd/mtdpart.c b/drivers/mtd/mtdpart.c
new file mode 100644
index 000000000..f010f5e3a
--- /dev/null
+++ b/drivers/mtd/mtdpart.c
@@ -0,0 +1,540 @@
+/*
+ * Simple MTD partitioning layer
+ *
+ * (C) 2000 Nicolas Pitre <nico@cam.org>
+ *
+ * This code is GPL
+ *
+ * 	02-21-2002	Thomas Gleixner <gleixner@autronix.de>
+ *			added support for read_oob, write_oob
+ */
+
+#include <common.h>
+#include <malloc.h>
+#include <asm/errno.h>
+
+#include <linux/types.h>
+#include <linux/list.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/compat.h>
+
+/* Our partition linked list */
+struct list_head mtd_partitions;
+
+/* Our partition node structure */
+struct mtd_part {
+	struct mtd_info mtd;
+	struct mtd_info *master;
+	u_int32_t offset;
+	int index;
+	struct list_head list;
+	int registered;
+};
+
+/*
+ * Given a pointer to the MTD object in the mtd_part structure, we can retrieve
+ * the pointer to that structure with this macro.
+ */
+#define PART(x)  ((struct mtd_part *)(x))
+
+
+/*
+ * MTD methods which simply translate the effective address and pass through
+ * to the _real_ device.
+ */
+
+static int part_read (struct mtd_info *mtd, loff_t from, size_t len,
+			size_t *retlen, u_char *buf)
+{
+	struct mtd_part *part = PART(mtd);
+	int res;
+
+	if (from >= mtd->size)
+		len = 0;
+	else if (from + len > mtd->size)
+		len = mtd->size - from;
+	res = part->master->read (part->master, from + part->offset,
+				   len, retlen, buf);
+	if (unlikely(res)) {
+		if (res == -EUCLEAN)
+			mtd->ecc_stats.corrected++;
+		if (res == -EBADMSG)
+			mtd->ecc_stats.failed++;
+	}
+	return res;
+}
+
+#ifdef MTD_LINUX
+static int part_point (struct mtd_info *mtd, loff_t from, size_t len,
+			size_t *retlen, void **virt, resource_size_t *phys)
+{
+	struct mtd_part *part = PART(mtd);
+	if (from >= mtd->size)
+		len = 0;
+	else if (from + len > mtd->size)
+		len = mtd->size - from;
+	return part->master->point (part->master, from + part->offset,
+				    len, retlen, virt, phys);
+}
+
+static void part_unpoint(struct mtd_info *mtd, loff_t from, size_t len)
+{
+	struct mtd_part *part = PART(mtd);
+
+	part->master->unpoint(part->master, from + part->offset, len);
+}
+#endif
+
+static int part_read_oob(struct mtd_info *mtd, loff_t from,
+			 struct mtd_oob_ops *ops)
+{
+	struct mtd_part *part = PART(mtd);
+	int res;
+
+	if (from >= mtd->size)
+		return -EINVAL;
+	if (ops->datbuf && from + ops->len > mtd->size)
+		return -EINVAL;
+	res = part->master->read_oob(part->master, from + part->offset, ops);
+
+	if (unlikely(res)) {
+		if (res == -EUCLEAN)
+			mtd->ecc_stats.corrected++;
+		if (res == -EBADMSG)
+			mtd->ecc_stats.failed++;
+	}
+	return res;
+}
+
+static int part_read_user_prot_reg (struct mtd_info *mtd, loff_t from, size_t len,
+			size_t *retlen, u_char *buf)
+{
+	struct mtd_part *part = PART(mtd);
+	return part->master->read_user_prot_reg (part->master, from,
+					len, retlen, buf);
+}
+
+static int part_get_user_prot_info (struct mtd_info *mtd,
+				    struct otp_info *buf, size_t len)
+{
+	struct mtd_part *part = PART(mtd);
+	return part->master->get_user_prot_info (part->master, buf, len);
+}
+
+static int part_read_fact_prot_reg (struct mtd_info *mtd, loff_t from, size_t len,
+			size_t *retlen, u_char *buf)
+{
+	struct mtd_part *part = PART(mtd);
+	return part->master->read_fact_prot_reg (part->master, from,
+					len, retlen, buf);
+}
+
+static int part_get_fact_prot_info (struct mtd_info *mtd,
+				    struct otp_info *buf, size_t len)
+{
+	struct mtd_part *part = PART(mtd);
+	return part->master->get_fact_prot_info (part->master, buf, len);
+}
+
+static int part_write (struct mtd_info *mtd, loff_t to, size_t len,
+			size_t *retlen, const u_char *buf)
+{
+	struct mtd_part *part = PART(mtd);
+	if (!(mtd->flags & MTD_WRITEABLE))
+		return -EROFS;
+	if (to >= mtd->size)
+		len = 0;
+	else if (to + len > mtd->size)
+		len = mtd->size - to;
+	return part->master->write (part->master, to + part->offset,
+				    len, retlen, buf);
+}
+
+#ifdef MTD_LINUX
+static int part_panic_write (struct mtd_info *mtd, loff_t to, size_t len,
+			size_t *retlen, const u_char *buf)
+{
+	struct mtd_part *part = PART(mtd);
+	if (!(mtd->flags & MTD_WRITEABLE))
+		return -EROFS;
+	if (to >= mtd->size)
+		len = 0;
+	else if (to + len > mtd->size)
+		len = mtd->size - to;
+	return part->master->panic_write (part->master, to + part->offset,
+				    len, retlen, buf);
+}
+#endif
+
+static int part_write_oob(struct mtd_info *mtd, loff_t to,
+			 struct mtd_oob_ops *ops)
+{
+	struct mtd_part *part = PART(mtd);
+
+	if (!(mtd->flags & MTD_WRITEABLE))
+		return -EROFS;
+
+	if (to >= mtd->size)
+		return -EINVAL;
+	if (ops->datbuf && to + ops->len > mtd->size)
+		return -EINVAL;
+	return part->master->write_oob(part->master, to + part->offset, ops);
+}
+
+static int part_write_user_prot_reg (struct mtd_info *mtd, loff_t from, size_t len,
+			size_t *retlen, u_char *buf)
+{
+	struct mtd_part *part = PART(mtd);
+	return part->master->write_user_prot_reg (part->master, from,
+					len, retlen, buf);
+}
+
+static int part_lock_user_prot_reg (struct mtd_info *mtd, loff_t from, size_t len)
+{
+	struct mtd_part *part = PART(mtd);
+	return part->master->lock_user_prot_reg (part->master, from, len);
+}
+
+#ifdef MTD_LINUX
+static int part_writev (struct mtd_info *mtd,  const struct kvec *vecs,
+			 unsigned long count, loff_t to, size_t *retlen)
+{
+	struct mtd_part *part = PART(mtd);
+	if (!(mtd->flags & MTD_WRITEABLE))
+		return -EROFS;
+	return part->master->writev (part->master, vecs, count,
+					to + part->offset, retlen);
+}
+#endif
+
+static int part_erase (struct mtd_info *mtd, struct erase_info *instr)
+{
+	struct mtd_part *part = PART(mtd);
+	int ret;
+	if (!(mtd->flags & MTD_WRITEABLE))
+		return -EROFS;
+	if (instr->addr >= mtd->size)
+		return -EINVAL;
+	instr->addr += part->offset;
+	ret = part->master->erase(part->master, instr);
+	if (ret) {
+		if (instr->fail_addr != 0xffffffff)
+			instr->fail_addr -= part->offset;
+		instr->addr -= part->offset;
+	}
+	return ret;
+}
+
+void mtd_erase_callback(struct erase_info *instr)
+{
+	if (instr->mtd->erase == part_erase) {
+		struct mtd_part *part = PART(instr->mtd);
+
+		if (instr->fail_addr != 0xffffffff)
+			instr->fail_addr -= part->offset;
+		instr->addr -= part->offset;
+	}
+	if (instr->callback)
+		instr->callback(instr);
+}
+#ifdef MTD_LINUX
+EXPORT_SYMBOL_GPL(mtd_erase_callback);
+#endif
+
+#ifdef MTD_LINUX
+static int part_lock (struct mtd_info *mtd, loff_t ofs, size_t len)
+{
+	struct mtd_part *part = PART(mtd);
+	if ((len + ofs) > mtd->size)
+		return -EINVAL;
+	return part->master->lock(part->master, ofs + part->offset, len);
+}
+
+static int part_unlock (struct mtd_info *mtd, loff_t ofs, size_t len)
+{
+	struct mtd_part *part = PART(mtd);
+	if ((len + ofs) > mtd->size)
+		return -EINVAL;
+	return part->master->unlock(part->master, ofs + part->offset, len);
+}
+#endif
+
+static void part_sync(struct mtd_info *mtd)
+{
+	struct mtd_part *part = PART(mtd);
+	part->master->sync(part->master);
+}
+
+#ifdef MTD_LINUX
+static int part_suspend(struct mtd_info *mtd)
+{
+	struct mtd_part *part = PART(mtd);
+	return part->master->suspend(part->master);
+}
+
+static void part_resume(struct mtd_info *mtd)
+{
+	struct mtd_part *part = PART(mtd);
+	part->master->resume(part->master);
+}
+#endif
+
+static int part_block_isbad (struct mtd_info *mtd, loff_t ofs)
+{
+	struct mtd_part *part = PART(mtd);
+	if (ofs >= mtd->size)
+		return -EINVAL;
+	ofs += part->offset;
+	return part->master->block_isbad(part->master, ofs);
+}
+
+static int part_block_markbad (struct mtd_info *mtd, loff_t ofs)
+{
+	struct mtd_part *part = PART(mtd);
+	int res;
+
+	if (!(mtd->flags & MTD_WRITEABLE))
+		return -EROFS;
+	if (ofs >= mtd->size)
+		return -EINVAL;
+	ofs += part->offset;
+	res = part->master->block_markbad(part->master, ofs);
+#ifdef MTD_LINUX
+	if (!res)
+		mtd->ecc_stats.badblocks++;
+#endif
+	return res;
+}
+
+/*
+ * This function unregisters and destroy all slave MTD objects which are
+ * attached to the given master MTD object.
+ */
+
+int del_mtd_partitions(struct mtd_info *master)
+{
+	struct list_head *node;
+	struct mtd_part *slave;
+
+	for (node = mtd_partitions.next;
+	     node != &mtd_partitions;
+	     node = node->next) {
+		slave = list_entry(node, struct mtd_part, list);
+		if (slave->master == master) {
+			struct list_head *prev = node->prev;
+			__list_del(prev, node->next);
+			if(slave->registered)
+				del_mtd_device(&slave->mtd);
+			kfree(slave);
+			node = prev;
+		}
+	}
+
+	return 0;
+}
+
+/*
+ * This function, given a master MTD object and a partition table, creates
+ * and registers slave MTD objects which are bound to the master according to
+ * the partition definitions.
+ * (Q: should we register the master MTD object as well?)
+ */
+
+int add_mtd_partitions(struct mtd_info *master,
+		       const struct mtd_partition *parts,
+		       int nbparts)
+{
+	struct mtd_part *slave;
+	u_int32_t cur_offset = 0;
+	int i;
+
+	/*
+	 * Need to init the list here, since LIST_INIT() does not
+	 * work on platforms where relocation has problems (like MIPS
+	 * & PPC).
+	 */
+	if (mtd_partitions.next == NULL)
+		INIT_LIST_HEAD(&mtd_partitions);
+
+	printk (KERN_NOTICE "Creating %d MTD partitions on \"%s\":\n", nbparts, master->name);
+
+	for (i = 0; i < nbparts; i++) {
+
+		/* allocate the partition structure */
+		slave = kzalloc (sizeof(*slave), GFP_KERNEL);
+		if (!slave) {
+			printk ("memory allocation error while creating partitions for \"%s\"\n",
+				master->name);
+			del_mtd_partitions(master);
+			return -ENOMEM;
+		}
+		list_add(&slave->list, &mtd_partitions);
+
+		/* set up the MTD object for this partition */
+		slave->mtd.type = master->type;
+		slave->mtd.flags = master->flags & ~parts[i].mask_flags;
+		slave->mtd.size = parts[i].size;
+		slave->mtd.writesize = master->writesize;
+		slave->mtd.oobsize = master->oobsize;
+		slave->mtd.oobavail = master->oobavail;
+		slave->mtd.subpage_sft = master->subpage_sft;
+
+		slave->mtd.name = parts[i].name;
+		slave->mtd.owner = master->owner;
+
+		slave->mtd.read = part_read;
+		slave->mtd.write = part_write;
+
+#ifdef MTD_LINUX
+		if (master->panic_write)
+			slave->mtd.panic_write = part_panic_write;
+
+		if(master->point && master->unpoint){
+			slave->mtd.point = part_point;
+			slave->mtd.unpoint = part_unpoint;
+		}
+#endif
+
+		if (master->read_oob)
+			slave->mtd.read_oob = part_read_oob;
+		if (master->write_oob)
+			slave->mtd.write_oob = part_write_oob;
+		if(master->read_user_prot_reg)
+			slave->mtd.read_user_prot_reg = part_read_user_prot_reg;
+		if(master->read_fact_prot_reg)
+			slave->mtd.read_fact_prot_reg = part_read_fact_prot_reg;
+		if(master->write_user_prot_reg)
+			slave->mtd.write_user_prot_reg = part_write_user_prot_reg;
+		if(master->lock_user_prot_reg)
+			slave->mtd.lock_user_prot_reg = part_lock_user_prot_reg;
+		if(master->get_user_prot_info)
+			slave->mtd.get_user_prot_info = part_get_user_prot_info;
+		if(master->get_fact_prot_info)
+			slave->mtd.get_fact_prot_info = part_get_fact_prot_info;
+		if (master->sync)
+			slave->mtd.sync = part_sync;
+#ifdef MTD_LINUX
+		if (!i && master->suspend && master->resume) {
+				slave->mtd.suspend = part_suspend;
+				slave->mtd.resume = part_resume;
+		}
+		if (master->writev)
+			slave->mtd.writev = part_writev;
+		if (master->lock)
+			slave->mtd.lock = part_lock;
+		if (master->unlock)
+			slave->mtd.unlock = part_unlock;
+#endif
+		if (master->block_isbad)
+			slave->mtd.block_isbad = part_block_isbad;
+		if (master->block_markbad)
+			slave->mtd.block_markbad = part_block_markbad;
+		slave->mtd.erase = part_erase;
+		slave->master = master;
+		slave->offset = parts[i].offset;
+		slave->index = i;
+
+		if (slave->offset == MTDPART_OFS_APPEND)
+			slave->offset = cur_offset;
+		if (slave->offset == MTDPART_OFS_NXTBLK) {
+			slave->offset = cur_offset;
+			if ((cur_offset % master->erasesize) != 0) {
+				/* Round up to next erasesize */
+				slave->offset = ((cur_offset / master->erasesize) + 1) * master->erasesize;
+				printk(KERN_NOTICE "Moving partition %d: "
+				       "0x%08x -> 0x%08x\n", i,
+				       cur_offset, slave->offset);
+			}
+		}
+		if (slave->mtd.size == MTDPART_SIZ_FULL)
+			slave->mtd.size = master->size - slave->offset;
+		cur_offset = slave->offset + slave->mtd.size;
+
+		printk (KERN_NOTICE "0x%08x-0x%08x : \"%s\"\n", slave->offset,
+			slave->offset + slave->mtd.size, slave->mtd.name);
+
+		/* let's do some sanity checks */
+		if (slave->offset >= master->size) {
+				/* let's register it anyway to preserve ordering */
+			slave->offset = 0;
+			slave->mtd.size = 0;
+			printk ("mtd: partition \"%s\" is out of reach -- disabled\n",
+				parts[i].name);
+		}
+		if (slave->offset + slave->mtd.size > master->size) {
+			slave->mtd.size = master->size - slave->offset;
+			printk ("mtd: partition \"%s\" extends beyond the end of device \"%s\" -- size truncated to %#x\n",
+				parts[i].name, master->name, slave->mtd.size);
+		}
+		if (master->numeraseregions>1) {
+			/* Deal with variable erase size stuff */
+			int i;
+			struct mtd_erase_region_info *regions = master->eraseregions;
+
+			/* Find the first erase regions which is part of this partition. */
+			for (i=0; i < master->numeraseregions && slave->offset >= regions[i].offset; i++)
+				;
+
+			for (i--; i < master->numeraseregions && slave->offset + slave->mtd.size > regions[i].offset; i++) {
+				if (slave->mtd.erasesize < regions[i].erasesize) {
+					slave->mtd.erasesize = regions[i].erasesize;
+				}
+			}
+		} else {
+			/* Single erase size */
+			slave->mtd.erasesize = master->erasesize;
+		}
+
+		if ((slave->mtd.flags & MTD_WRITEABLE) &&
+		    (slave->offset % slave->mtd.erasesize)) {
+			/* Doesn't start on a boundary of major erase size */
+			/* FIXME: Let it be writable if it is on a boundary of _minor_ erase size though */
+			slave->mtd.flags &= ~MTD_WRITEABLE;
+			printk ("mtd: partition \"%s\" doesn't start on an erase block boundary -- force read-only\n",
+				parts[i].name);
+		}
+		if ((slave->mtd.flags & MTD_WRITEABLE) &&
+		    (slave->mtd.size % slave->mtd.erasesize)) {
+			slave->mtd.flags &= ~MTD_WRITEABLE;
+			printk ("mtd: partition \"%s\" doesn't end on an erase block -- force read-only\n",
+				parts[i].name);
+		}
+
+		slave->mtd.ecclayout = master->ecclayout;
+		if (master->block_isbad) {
+			uint32_t offs = 0;
+
+			while(offs < slave->mtd.size) {
+				if (master->block_isbad(master,
+							offs + slave->offset))
+					slave->mtd.ecc_stats.badblocks++;
+				offs += slave->mtd.erasesize;
+			}
+		}
+
+#ifdef MTD_LINUX
+		if (parts[i].mtdp) {
+			/* store the object pointer
+			 * (caller may or may not register it */
+			*parts[i].mtdp = &slave->mtd;
+			slave->registered = 0;
+		} else {
+			/* register our partition */
+			add_mtd_device(&slave->mtd);
+			slave->registered = 1;
+		}
+#else
+		/* register our partition */
+		add_mtd_device(&slave->mtd);
+		slave->registered = 1;
+#endif
+	}
+
+	return 0;
+}
+
+#ifdef MTD_LINUX
+EXPORT_SYMBOL(add_mtd_partitions);
+EXPORT_SYMBOL(del_mtd_partitions);
+#endif
diff --git a/drivers/mtd/mw_eeprom.c b/drivers/mtd/mw_eeprom.c
index f32ced4c2..f7791b51a 100644
--- a/drivers/mtd/mw_eeprom.c
+++ b/drivers/mtd/mw_eeprom.c
@@ -1,7 +1,7 @@
 /* Three-wire (MicroWire) serial eeprom driver (for 93C46 and compatibles) */
 
 #include <common.h>
-#include <ssi.h>
+#include <asm/ic/ssi.h>
 
 /*
  * Serial EEPROM opcodes, including start bit
diff --git a/drivers/mtd/nand/diskonchip.c b/drivers/mtd/nand/diskonchip.c
index 4cba8100a..e9dc4d1fd 100644
--- a/drivers/mtd/nand/diskonchip.c
+++ b/drivers/mtd/nand/diskonchip.c
@@ -15,8 +15,6 @@
  * converted to the generic Reed-Solomon library by Thomas Gleixner <tglx@linutronix.de>
  *
  * Interface to generic NAND code for M-Systems DiskOnChip devices
- *
- * $Id: diskonchip.c,v 1.55 2005/11/07 11:14:30 gleixner Exp $
  */
 
 #include <common.h>
@@ -58,13 +56,6 @@ static unsigned long __initdata doc_locations[] = {
 	0xe0000, 0xe2000, 0xe4000, 0xe6000,
 	0xe8000, 0xea000, 0xec000, 0xee000,
 #endif /*  CONFIG_MTD_DOCPROBE_HIGH */
-#elif defined(__PPC__)
-	0xe4000000,
-#elif defined(CONFIG_MOMENCO_OCELOT)
-	0x2f000000,
-	0xff000000,
-#elif defined(CONFIG_MOMENCO_OCELOT_G) || defined (CONFIG_MOMENCO_OCELOT_C)
-	0xff000000,
 #else
 #warning Unknown architecture for DiskOnChip. No default probe locations defined
 #endif
@@ -229,7 +220,7 @@ static int doc_ecc_decode(struct rs_control *rs, uint8_t *data, uint8_t *ecc)
 		}
 	}
 	/* If the parity is wrong, no rescue possible */
-	return parity ? -1 : nerr;
+	return parity ? -EBADMSG : nerr;
 }
 
 static void DoC_Delay(struct doc_priv *doc, unsigned short cycles)
@@ -1044,7 +1035,7 @@ static int doc200x_correct_data(struct mtd_info *mtd, u_char *dat,
 		WriteDOC(DOC_ECC_DIS, docptr, Mplus_ECCConf);
 	else
 		WriteDOC(DOC_ECC_DIS, docptr, ECCConf);
-	if (no_ecc_failures && (ret == -1)) {
+	if (no_ecc_failures && (ret == -EBADMSG)) {
 		printk(KERN_ERR "suppressing ECC failure\n");
 		ret = 0;
 	}
@@ -1139,9 +1130,9 @@ static inline int __init nftl_partscan(struct mtd_info *mtd, struct mtd_partitio
 		goto out;
 	mh = (struct NFTLMediaHeader *)buf;
 
-	mh->NumEraseUnits = le16_to_cpu(mh->NumEraseUnits);
-	mh->FirstPhysicalEUN = le16_to_cpu(mh->FirstPhysicalEUN);
-	mh->FormattedSize = le32_to_cpu(mh->FormattedSize);
+	le16_to_cpus(&mh->NumEraseUnits);
+	le16_to_cpus(&mh->FirstPhysicalEUN);
+	le32_to_cpus(&mh->FormattedSize);
 
 	printk(KERN_INFO "    DataOrgID        = %s\n"
 			 "    NumEraseUnits    = %d\n"
@@ -1249,12 +1240,12 @@ static inline int __init inftl_partscan(struct mtd_info *mtd, struct mtd_partiti
 	doc->mh1_page = doc->mh0_page + (4096 >> this->page_shift);
 	mh = (struct INFTLMediaHeader *)buf;
 
-	mh->NoOfBootImageBlocks = le32_to_cpu(mh->NoOfBootImageBlocks);
-	mh->NoOfBinaryPartitions = le32_to_cpu(mh->NoOfBinaryPartitions);
-	mh->NoOfBDTLPartitions = le32_to_cpu(mh->NoOfBDTLPartitions);
-	mh->BlockMultiplierBits = le32_to_cpu(mh->BlockMultiplierBits);
-	mh->FormatFlags = le32_to_cpu(mh->FormatFlags);
-	mh->PercentUsed = le32_to_cpu(mh->PercentUsed);
+	le32_to_cpus(&mh->NoOfBootImageBlocks);
+	le32_to_cpus(&mh->NoOfBinaryPartitions);
+	le32_to_cpus(&mh->NoOfBDTLPartitions);
+	le32_to_cpus(&mh->BlockMultiplierBits);
+	le32_to_cpus(&mh->FormatFlags);
+	le32_to_cpus(&mh->PercentUsed);
 
 	printk(KERN_INFO "    bootRecordID          = %s\n"
 			 "    NoOfBootImageBlocks   = %d\n"
@@ -1291,12 +1282,12 @@ static inline int __init inftl_partscan(struct mtd_info *mtd, struct mtd_partiti
 	/* Scan the partitions */
 	for (i = 0; (i < 4); i++) {
 		ip = &(mh->Partitions[i]);
-		ip->virtualUnits = le32_to_cpu(ip->virtualUnits);
-		ip->firstUnit = le32_to_cpu(ip->firstUnit);
-		ip->lastUnit = le32_to_cpu(ip->lastUnit);
-		ip->flags = le32_to_cpu(ip->flags);
-		ip->spareUnits = le32_to_cpu(ip->spareUnits);
-		ip->Reserved0 = le32_to_cpu(ip->Reserved0);
+		le32_to_cpus(&ip->virtualUnits);
+		le32_to_cpus(&ip->firstUnit);
+		le32_to_cpus(&ip->lastUnit);
+		le32_to_cpus(&ip->flags);
+		le32_to_cpus(&ip->spareUnits);
+		le32_to_cpus(&ip->Reserved0);
 
 		printk(KERN_INFO	"    PARTITION[%d] ->\n"
 			"        virtualUnits    = %d\n"
diff --git a/drivers/mtd/nand/fsl_elbc_nand.c b/drivers/mtd/nand/fsl_elbc_nand.c
index 674c54200..367c7d7fc 100644
--- a/drivers/mtd/nand/fsl_elbc_nand.c
+++ b/drivers/mtd/nand/fsl_elbc_nand.c
@@ -75,7 +75,7 @@ struct fsl_elbc_ctrl {
 	struct fsl_elbc_mtd *chips[MAX_BANKS];
 
 	/* device info */
-	lbus83xx_t *regs;
+	fsl_lbus_t *regs;
 	u8 __iomem *addr;        /* Address of assigned FCM buffer        */
 	unsigned int page;       /* Last page written to / read from      */
 	unsigned int read_bytes; /* Number of bytes read during command   */
@@ -95,7 +95,6 @@ static struct nand_ecclayout fsl_elbc_oob_sp_eccm0 = {
 	.eccbytes = 3,
 	.eccpos = {6, 7, 8},
 	.oobfree = { {0, 5}, {9, 7} },
-	.oobavail = 12,
 };
 
 /* Small Page FLASH with FMR[ECCM] = 1 */
@@ -103,7 +102,6 @@ static struct nand_ecclayout fsl_elbc_oob_sp_eccm1 = {
 	.eccbytes = 3,
 	.eccpos = {8, 9, 10},
 	.oobfree = { {0, 5}, {6, 2}, {11, 5} },
-	.oobavail = 12,
 };
 
 /* Large Page FLASH with FMR[ECCM] = 0 */
@@ -111,7 +109,6 @@ static struct nand_ecclayout fsl_elbc_oob_lp_eccm0 = {
 	.eccbytes = 12,
 	.eccpos = {6, 7, 8, 22, 23, 24, 38, 39, 40, 54, 55, 56},
 	.oobfree = { {1, 5}, {9, 13}, {25, 13}, {41, 13}, {57, 7} },
-	.oobavail = 48,
 };
 
 /* Large Page FLASH with FMR[ECCM] = 1 */
@@ -119,7 +116,48 @@ static struct nand_ecclayout fsl_elbc_oob_lp_eccm1 = {
 	.eccbytes = 12,
 	.eccpos = {8, 9, 10, 24, 25, 26, 40, 41, 42, 56, 57, 58},
 	.oobfree = { {1, 7}, {11, 13}, {27, 13}, {43, 13}, {59, 5} },
-	.oobavail = 48,
+};
+
+/*
+ * fsl_elbc_oob_lp_eccm* specify that LP NAND's OOB free area starts at offset
+ * 1, so we have to adjust bad block pattern. This pattern should be used for
+ * x8 chips only. So far hardware does not support x16 chips anyway.
+ */
+static u8 scan_ff_pattern[] = { 0xff, };
+
+static struct nand_bbt_descr largepage_memorybased = {
+	.options = 0,
+	.offs = 0,
+	.len = 1,
+	.pattern = scan_ff_pattern,
+};
+
+/*
+ * ELBC may use HW ECC, so that OOB offsets, that NAND core uses for bbt,
+ * interfere with ECC positions, that's why we implement our own descriptors.
+ * OOB {11, 5}, works for both SP and LP chips, with ECCM = 1 and ECCM = 0.
+ */
+static u8 bbt_pattern[] = {'B', 'b', 't', '0' };
+static u8 mirror_pattern[] = {'1', 't', 'b', 'B' };
+
+static struct nand_bbt_descr bbt_main_descr = {
+	.options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE | NAND_BBT_WRITE |
+		   NAND_BBT_2BIT | NAND_BBT_VERSION,
+	.offs =	11,
+	.len = 4,
+	.veroffs = 15,
+	.maxblocks = 4,
+	.pattern = bbt_pattern,
+};
+
+static struct nand_bbt_descr bbt_mirror_descr = {
+	.options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE | NAND_BBT_WRITE |
+		   NAND_BBT_2BIT | NAND_BBT_VERSION,
+	.offs =	11,
+	.len = 4,
+	.veroffs = 15,
+	.maxblocks = 4,
+	.pattern = mirror_pattern,
 };
 
 /*=================================*/
@@ -133,7 +171,7 @@ static void set_addr(struct mtd_info *mtd, int column, int page_addr, int oob)
 	struct nand_chip *chip = mtd->priv;
 	struct fsl_elbc_mtd *priv = chip->priv;
 	struct fsl_elbc_ctrl *ctrl = priv->ctrl;
-	lbus83xx_t *lbc = ctrl->regs;
+	fsl_lbus_t *lbc = ctrl->regs;
 	int buf_num;
 
 	ctrl->page = page_addr;
@@ -173,7 +211,7 @@ static int fsl_elbc_run_command(struct mtd_info *mtd)
 	struct nand_chip *chip = mtd->priv;
 	struct fsl_elbc_mtd *priv = chip->priv;
 	struct fsl_elbc_ctrl *ctrl = priv->ctrl;
-	lbus83xx_t *lbc = ctrl->regs;
+	fsl_lbus_t *lbc = ctrl->regs;
 	long long end_tick;
 	u32 ltesr;
 
@@ -223,7 +261,7 @@ static void fsl_elbc_do_read(struct nand_chip *chip, int oob)
 {
 	struct fsl_elbc_mtd *priv = chip->priv;
 	struct fsl_elbc_ctrl *ctrl = priv->ctrl;
-	lbus83xx_t *lbc = ctrl->regs;
+	fsl_lbus_t *lbc = ctrl->regs;
 
 	if (priv->page_size) {
 		out_be32(&lbc->fir,
@@ -257,7 +295,7 @@ static void fsl_elbc_cmdfunc(struct mtd_info *mtd, unsigned int command,
 	struct nand_chip *chip = mtd->priv;
 	struct fsl_elbc_mtd *priv = chip->priv;
 	struct fsl_elbc_ctrl *ctrl = priv->ctrl;
-	lbus83xx_t *lbc = ctrl->regs;
+	fsl_lbus_t *lbc = ctrl->regs;
 
 	ctrl->use_mdr = 0;
 
@@ -595,7 +633,7 @@ static int fsl_elbc_wait(struct mtd_info *mtd, struct nand_chip *chip)
 {
 	struct fsl_elbc_mtd *priv = chip->priv;
 	struct fsl_elbc_ctrl *ctrl = priv->ctrl;
-	lbus83xx_t *lbc = ctrl->regs;
+	fsl_lbus_t *lbc = ctrl->regs;
 
 	if (ctrl->status != LTESR_CC)
 		return NAND_STATUS_FAIL;
@@ -655,13 +693,15 @@ static struct fsl_elbc_ctrl *elbc_ctrl;
 
 static void fsl_elbc_ctrl_init(void)
 {
-	immap_t *im = (immap_t *)CFG_IMMR;
-
 	elbc_ctrl = kzalloc(sizeof(*elbc_ctrl), GFP_KERNEL);
 	if (!elbc_ctrl)
 		return;
 
-	elbc_ctrl->regs = &im->lbus;
+#ifdef CONFIG_MPC85xx
+	elbc_ctrl->regs = (void *)CONFIG_SYS_MPC85xx_LBC_ADDR;
+#else
+	elbc_ctrl->regs = &((immap_t *)CONFIG_SYS_IMMR)->lbus;
+#endif
 
 	/* clear event registers */
 	out_be32(&elbc_ctrl->regs->ltesr, LTESR_NAND_MASK);
@@ -724,7 +764,12 @@ int board_nand_init(struct nand_chip *nand)
 	nand->waitfunc = fsl_elbc_wait;
 
 	/* set up nand options */
-	nand->options = NAND_NO_READRDY | NAND_NO_AUTOINCR;
+	nand->bbt_td = &bbt_main_descr;
+	nand->bbt_md = &bbt_mirror_descr;
+
+  	/* set up nand options */
+	nand->options = NAND_NO_READRDY | NAND_NO_AUTOINCR |
+			NAND_USE_FLASH_BBT;
 
 	nand->controller = &elbc_ctrl->controller;
 	nand->priv = priv;
@@ -732,6 +777,20 @@ int board_nand_init(struct nand_chip *nand)
 	nand->ecc.read_page = fsl_elbc_read_page;
 	nand->ecc.write_page = fsl_elbc_write_page;
 
+#ifdef CONFIG_FSL_ELBC_FMR
+	priv->fmr = CONFIG_FSL_ELBC_FMR;
+#else
+	priv->fmr = (15 << FMR_CWTO_SHIFT) | (2 << FMR_AL_SHIFT);
+
+	/*
+	 * Hardware expects small page has ECCM0, large page has ECCM1
+	 * when booting from NAND.  Board config can override if not
+	 * booting from NAND.
+	 */
+	if (or & OR_FCM_PGS)
+		priv->fmr |= FMR_ECCM;
+#endif
+
 	/* If CS Base Register selects full hardware ECC then use it */
 	if ((br & BR_DECC) == BR_DECC_CHK_GEN) {
 		nand->ecc.mode = NAND_ECC_HW;
@@ -748,11 +807,10 @@ int board_nand_init(struct nand_chip *nand)
 		nand->ecc.mode = NAND_ECC_SOFT;
 	}
 
-	priv->fmr = (15 << FMR_CWTO_SHIFT) | (2 << FMR_AL_SHIFT);
-
-	/* adjust Option Register and ECC to match Flash page size */
+	/* Large-page-specific setup */
 	if (or & OR_FCM_PGS) {
 		priv->page_size = 1;
+		nand->badblock_pattern = &largepage_memorybased;
 
 		/* adjust ecc setup if needed */
 		if ((br & BR_DECC) == BR_DECC_CHK_GEN) {
diff --git a/drivers/mtd/nand/nand.c b/drivers/mtd/nand/nand.c
index ebd2acd02..eeb19ff1b 100644
--- a/drivers/mtd/nand/nand.c
+++ b/drivers/mtd/nand/nand.c
@@ -24,15 +24,15 @@
 #include <common.h>
 #include <nand.h>
 
-#ifndef CFG_NAND_BASE_LIST
-#define CFG_NAND_BASE_LIST { CFG_NAND_BASE }
+#ifndef CONFIG_SYS_NAND_BASE_LIST
+#define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE }
 #endif
 
 int nand_curr_device = -1;
-nand_info_t nand_info[CFG_MAX_NAND_DEVICE];
+nand_info_t nand_info[CONFIG_SYS_MAX_NAND_DEVICE];
 
-static struct nand_chip nand_chip[CFG_MAX_NAND_DEVICE];
-static ulong base_address[CFG_MAX_NAND_DEVICE] = CFG_NAND_BASE_LIST;
+static struct nand_chip nand_chip[CONFIG_SYS_MAX_NAND_DEVICE];
+static ulong base_address[CONFIG_SYS_MAX_NAND_DEVICE] = CONFIG_SYS_NAND_BASE_LIST;
 
 static const char default_nand_name[] = "nand";
 
@@ -61,15 +61,15 @@ void nand_init(void)
 {
 	int i;
 	unsigned int size = 0;
-	for (i = 0; i < CFG_MAX_NAND_DEVICE; i++) {
+	for (i = 0; i < CONFIG_SYS_MAX_NAND_DEVICE; i++) {
 		nand_init_chip(&nand_info[i], &nand_chip[i], base_address[i]);
-		size += nand_info[i].size;
+		size += nand_info[i].size / 1024;
 		if (nand_curr_device == -1)
 			nand_curr_device = i;
 	}
-	printf("%u MiB\n", size / (1024 * 1024));
+	printf("%u MiB\n", size / 1024);
 
-#ifdef CFG_NAND_SELECT_DEVICE
+#ifdef CONFIG_SYS_NAND_SELECT_DEVICE
 	/*
 	 * Select the chip in the board/cpu specific driver
 	 */
diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c
index 0913bb874..ba05b762e 100644
--- a/drivers/mtd/nand/nand_base.c
+++ b/drivers/mtd/nand/nand_base.c
@@ -7,7 +7,7 @@
  *   Basic support for AG-AND chips is provided.
  *
  *	Additional technical information is available on
- *	http://www.linux-mtd.infradead.org/tech/nand.html
+ *	http://www.linux-mtd.infradead.org/doc/nand.html
  *
  *  Copyright (C) 2000 Steven J. Hill (sjhill@realitydiluted.com)
  *		  2002-2006 Thomas Gleixner (tglx@linutronix.de)
@@ -24,6 +24,7 @@
  *	if we have HW ecc support.
  *	The AG-AND chips have nice features for speed improvement,
  *	which are not supported yet. Read / program 4 pages in one go.
+ *	BBT table is not serialized, has to be fixed
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -128,7 +129,7 @@ static int nand_do_write_oob(struct mtd_info *mtd, loff_t to,
 static int nand_wait(struct mtd_info *mtd, struct nand_chip *this);
 
 /*
- * For devices which display every fart in the system on a seperate LED. Is
+ * For devices which display every fart in the system on a separate LED. Is
  * compiled away when LED support is disabled.
  */
 /* XXX U-BOOT XXX */
@@ -412,6 +413,7 @@ static int nand_default_block_markbad(struct mtd_info *mtd, loff_t ofs)
 		/* We write two bytes, so we dont have to mess with 16 bit
 		 * access
 		 */
+		nand_get_device(chip, mtd, FL_WRITING);
 		ofs += mtd->oobsize;
 		chip->ops.len = chip->ops.ooblen = 2;
 		chip->ops.datbuf = NULL;
@@ -419,9 +421,11 @@ static int nand_default_block_markbad(struct mtd_info *mtd, loff_t ofs)
 		chip->ops.ooboffs = chip->badblockpos & ~0x01;
 
 		ret = nand_do_write_oob(mtd, ofs, &chip->ops);
+		nand_release_device(mtd);
 	}
 	if (!ret)
 		mtd->ecc_stats.badblocks++;
+
 	return ret;
 }
 
@@ -492,7 +496,7 @@ EXPORT_SYMBOL_GPL(nand_wait_ready);
 void nand_wait_ready(struct mtd_info *mtd)
 {
 	struct nand_chip *chip = mtd->priv;
-	u32 timeo = (CFG_HZ * 20) / 1000;
+	u32 timeo = (CONFIG_SYS_HZ * 20) / 1000;
 
 	reset_timer();
 
@@ -831,9 +835,9 @@ static int nand_wait(struct mtd_info *mtd, struct nand_chip *this)
 	int state = this->state;
 
 	if (state == FL_ERASING)
-		timeo = (CFG_HZ * 400) / 1000;
+		timeo = (CONFIG_SYS_HZ * 400) / 1000;
 	else
-		timeo = (CFG_HZ * 20) / 1000;
+		timeo = (CONFIG_SYS_HZ * 20) / 1000;
 
 	if ((state == FL_ERASING) && (this->options & NAND_IS_AND))
 		this->cmdfunc(mtd, NAND_CMD_STATUS_MULTI, -1, -1);
@@ -911,7 +915,88 @@ static int nand_read_page_swecc(struct mtd_info *mtd, struct nand_chip *chip,
 		int stat;
 
 		stat = chip->ecc.correct(mtd, p, &ecc_code[i], &ecc_calc[i]);
-		if (stat == -1)
+		if (stat < 0)
+			mtd->ecc_stats.failed++;
+		else
+			mtd->ecc_stats.corrected += stat;
+	}
+	return 0;
+}
+
+/**
+ * nand_read_subpage - [REPLACABLE] software ecc based sub-page read function
+ * @mtd:	mtd info structure
+ * @chip:	nand chip info structure
+ * @dataofs	offset of requested data within the page
+ * @readlen	data length
+ * @buf:	buffer to store read data
+ */
+static int nand_read_subpage(struct mtd_info *mtd, struct nand_chip *chip, uint32_t data_offs, uint32_t readlen, uint8_t *bufpoi)
+{
+	int start_step, end_step, num_steps;
+	uint32_t *eccpos = chip->ecc.layout->eccpos;
+	uint8_t *p;
+	int data_col_addr, i, gaps = 0;
+	int datafrag_len, eccfrag_len, aligned_len, aligned_pos;
+	int busw = (chip->options & NAND_BUSWIDTH_16) ? 2 : 1;
+
+	/* Column address wihin the page aligned to ECC size (256bytes). */
+	start_step = data_offs / chip->ecc.size;
+	end_step = (data_offs + readlen - 1) / chip->ecc.size;
+	num_steps = end_step - start_step + 1;
+
+	/* Data size aligned to ECC ecc.size*/
+	datafrag_len = num_steps * chip->ecc.size;
+	eccfrag_len = num_steps * chip->ecc.bytes;
+
+	data_col_addr = start_step * chip->ecc.size;
+	/* If we read not a page aligned data */
+	if (data_col_addr != 0)
+		chip->cmdfunc(mtd, NAND_CMD_RNDOUT, data_col_addr, -1);
+
+	p = bufpoi + data_col_addr;
+	chip->read_buf(mtd, p, datafrag_len);
+
+	/* Calculate  ECC */
+	for (i = 0; i < eccfrag_len ; i += chip->ecc.bytes, p += chip->ecc.size)
+		chip->ecc.calculate(mtd, p, &chip->buffers->ecccalc[i]);
+
+	/* The performance is faster if to position offsets
+	   according to ecc.pos. Let make sure here that
+	   there are no gaps in ecc positions */
+	for (i = 0; i < eccfrag_len - 1; i++) {
+		if (eccpos[i + start_step * chip->ecc.bytes] + 1 !=
+			eccpos[i + start_step * chip->ecc.bytes + 1]) {
+			gaps = 1;
+			break;
+		}
+	}
+	if (gaps) {
+		chip->cmdfunc(mtd, NAND_CMD_RNDOUT, mtd->writesize, -1);
+		chip->read_buf(mtd, chip->oob_poi, mtd->oobsize);
+	} else {
+		/* send the command to read the particular ecc bytes */
+		/* take care about buswidth alignment in read_buf */
+		aligned_pos = eccpos[start_step * chip->ecc.bytes] & ~(busw - 1);
+		aligned_len = eccfrag_len;
+		if (eccpos[start_step * chip->ecc.bytes] & (busw - 1))
+			aligned_len++;
+		if (eccpos[(start_step + num_steps) * chip->ecc.bytes] & (busw - 1))
+			aligned_len++;
+
+		chip->cmdfunc(mtd, NAND_CMD_RNDOUT, mtd->writesize + aligned_pos, -1);
+		chip->read_buf(mtd, &chip->oob_poi[aligned_pos], aligned_len);
+	}
+
+	for (i = 0; i < eccfrag_len; i++)
+		chip->buffers->ecccode[i] = chip->oob_poi[eccpos[i + start_step * chip->ecc.bytes]];
+
+	p = bufpoi + data_col_addr;
+	for (i = 0; i < eccfrag_len ; i += chip->ecc.bytes, p += chip->ecc.size) {
+		int stat;
+
+		stat = chip->ecc.correct(mtd, p, &chip->buffers->ecccode[i], &chip->buffers->ecccalc[i]);
+		if (stat < 0)
 			mtd->ecc_stats.failed++;
 		else
 			mtd->ecc_stats.corrected += stat;
@@ -996,7 +1081,7 @@ static int nand_read_page_syndrome(struct mtd_info *mtd, struct nand_chip *chip,
 		chip->read_buf(mtd, oob, eccbytes);
 		stat = chip->ecc.correct(mtd, p, oob, NULL);
 
-		if (stat == -1)
+		if (stat < 0)
 			mtd->ecc_stats.failed++;
 		else
 			mtd->ecc_stats.corrected += stat;
@@ -1116,6 +1201,8 @@ static int nand_do_read_ops(struct mtd_info *mtd, loff_t from,
 			/* Now read the page into the buffer */
 			if (unlikely(ops->mode == MTD_OOB_RAW))
 				ret = chip->ecc.read_page_raw(mtd, chip, bufpoi);
+			else if (!aligned && NAND_SUBPAGE_READ(chip) && !oob)
+				ret = chip->ecc.read_subpage(mtd, chip, col, bytes, bufpoi);
 			else
 				ret = chip->ecc.read_page(mtd, chip, bufpoi);
 			if (ret < 0)
@@ -1123,7 +1210,8 @@ static int nand_do_read_ops(struct mtd_info *mtd, loff_t from,
 
 			/* Transfer not aligned data */
 			if (!aligned) {
-				chip->pagebuf = realpage;
+				if (!NAND_SUBPAGE_READ(chip) && !oob)
+					chip->pagebuf = realpage;
 				memcpy(buf, chip->buffers->databuf + col, bytes);
 			}
 
@@ -2193,13 +2281,14 @@ int nand_erase_nand(struct mtd_info *mtd, struct erase_info *instr,
  erase_exit:
 
 	ret = instr->state == MTD_ERASE_DONE ? 0 : -EIO;
-	/* Do call back function */
-	if (!ret)
-		mtd_erase_callback(instr);
 
 	/* Deselect and wake up anyone waiting on the device */
 	nand_release_device(mtd);
 
+	/* Do call back function */
+	if (!ret)
+		mtd_erase_callback(instr);
+
 	/*
 	 * If BBT requires refresh and erase was successful, rewrite any
 	 * selected bad block tables
@@ -2356,10 +2445,17 @@ static struct nand_flash_dev *nand_get_flash_type(struct mtd_info *mtd,
 {
 	struct nand_flash_dev *type = NULL;
 	int i, dev_id, maf_idx;
+	int tmp_id, tmp_manf;
 
 	/* Select the device */
 	chip->select_chip(mtd, 0);
 
+	/*
+	 * Reset the chip, required by some chips (e.g. Micron MT29FxGxxxxx)
+	 * after power-up
+	 */
+	chip->cmdfunc(mtd, NAND_CMD_RESET, -1, -1);
+
 	/* Send the command for reading device ID */
 	chip->cmdfunc(mtd, NAND_CMD_READID, 0x00, -1);
 
@@ -2367,6 +2463,26 @@ static struct nand_flash_dev *nand_get_flash_type(struct mtd_info *mtd,
 	*maf_id = chip->read_byte(mtd);
 	dev_id = chip->read_byte(mtd);
 
+	/* Try again to make sure, as some systems the bus-hold or other
+	 * interface concerns can cause random data which looks like a
+	 * possibly credible NAND flash to appear. If the two results do
+	 * not match, ignore the device completely.
+	 */
+
+	chip->cmdfunc(mtd, NAND_CMD_READID, 0x00, -1);
+
+	/* Read manufacturer and device IDs */
+
+	tmp_manf = chip->read_byte(mtd);
+	tmp_id = chip->read_byte(mtd);
+
+	if (tmp_manf != *maf_id || tmp_id != dev_id) {
+		printk(KERN_INFO "%s: second ID read did not match "
+		       "%02x,%02x against %02x,%02x\n", __func__,
+		       *maf_id, dev_id, tmp_manf, tmp_id);
+		return ERR_PTR(-ENODEV);
+	}
+
 	/* Lookup the flash id */
 	for (i = 0; nand_flash_ids[i].name != NULL; i++) {
 		if (dev_id == nand_flash_ids[i].id) {
@@ -2510,6 +2626,8 @@ int nand_scan_ident(struct mtd_info *mtd, int maxchips)
 	/* Check for a chip array */
 	for (i = 1; i < maxchips; i++) {
 		chip->select_chip(mtd, i);
+		/* See comment in nand_get_flash_type for reset */
+		chip->cmdfunc(mtd, NAND_CMD_RESET, -1, -1);
 		/* Send the command for reading device ID */
 		chip->cmdfunc(mtd, NAND_CMD_READID, 0x00, -1);
 		/* Read manufacturer and device IDs */
@@ -2630,6 +2748,7 @@ int nand_scan_tail(struct mtd_info *mtd)
 		chip->ecc.calculate = nand_calculate_ecc;
 		chip->ecc.correct = nand_correct_data;
 		chip->ecc.read_page = nand_read_page_swecc;
+		chip->ecc.read_subpage = nand_read_subpage;
 		chip->ecc.write_page = nand_write_page_swecc;
 		chip->ecc.read_oob = nand_read_oob_std;
 		chip->ecc.write_oob = nand_write_oob_std;
diff --git a/drivers/mtd/nand/nand_bbt.c b/drivers/mtd/nand/nand_bbt.c
index b3b740da6..d68a315f1 100644
--- a/drivers/mtd/nand/nand_bbt.c
+++ b/drivers/mtd/nand/nand_bbt.c
@@ -6,8 +6,6 @@
  *
  *  Copyright (C) 2004 Thomas Gleixner (tglx@linutronix.de)
  *
- * $Id: nand_bbt.c,v 1.36 2005/11/07 11:14:30 gleixner Exp $
- *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
diff --git a/drivers/mtd/nand/nand_ecc.c b/drivers/mtd/nand/nand_ecc.c
index ee1f6cc8a..94923b952 100644
--- a/drivers/mtd/nand/nand_ecc.c
+++ b/drivers/mtd/nand/nand_ecc.c
@@ -9,8 +9,6 @@
  *
  * Copyright (C) 2006 Thomas Gleixner <tglx@linutronix.de>
  *
- * $Id: nand_ecc.c,v 1.15 2005/11/07 11:14:30 gleixner Exp $
- *
  * This file is free software; you can redistribute it and/or modify it
  * under the terms of the GNU General Public License as published by the
  * Free Software Foundation; either version 2 or (at your option) any
@@ -47,7 +45,8 @@
 #include <linux/mtd/nand_ecc.h>
 #endif
 
-#include<linux/mtd/mtd.h>
+#include <asm/errno.h>
+#include <linux/mtd/mtd.h>
 
 /*
  * NAND-SPL has no sofware ECC for now, so don't include nand_calculate_ecc(),
@@ -206,7 +205,7 @@ int nand_correct_data(struct mtd_info *mtd, u_char *dat,
 	if(countbits(s0 | ((uint32_t)s1 << 8) | ((uint32_t)s2 <<16)) == 1)
 		return 1;
 
-	return -1;
+	return -EBADMSG;
 }
 
 /* XXX U-BOOT XXX */
diff --git a/drivers/mtd/nand/nand_ids.c b/drivers/mtd/nand/nand_ids.c
index 2ff75c94e..077c3051b 100644
--- a/drivers/mtd/nand/nand_ids.c
+++ b/drivers/mtd/nand/nand_ids.c
@@ -3,8 +3,6 @@
  *
  *  Copyright (C) 2002 Thomas Gleixner (tglx@linutronix.de)
  *
- * $Id: nand_ids.c,v 1.16 2005/11/07 11:14:31 gleixner Exp $
- *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
@@ -142,5 +140,6 @@ struct nand_manufacturers nand_manuf_ids[] = {
 	{NAND_MFR_STMICRO, "ST Micro"},
 	{NAND_MFR_HYNIX, "Hynix"},
 	{NAND_MFR_MICRON, "Micron"},
+	{NAND_MFR_AMD, "AMD"},
 	{0x0, "Unknown"}
 };
diff --git a/drivers/mtd/nand/nand_util.c b/drivers/mtd/nand/nand_util.c
index 52b3d21b8..d86c98737 100644
--- a/drivers/mtd/nand/nand_util.c
+++ b/drivers/mtd/nand/nand_util.c
@@ -78,9 +78,7 @@ int nand_erase_opts(nand_info_t *meminfo, const nand_erase_options_t *opts)
 	const char *mtd_device = meminfo->name;
 	struct mtd_oob_ops oob_opts;
 	struct nand_chip *chip = meminfo->priv;
-	uint8_t buf[64];
 
-	memset(buf, 0, sizeof(buf));
 	memset(&erase, 0, sizeof(erase));
 	memset(&oob_opts, 0, sizeof(oob_opts));
 
@@ -89,13 +87,9 @@ int nand_erase_opts(nand_info_t *meminfo, const nand_erase_options_t *opts)
 	erase.addr = opts->offset;
 	erase_length = opts->length;
 
-
 	cleanmarker.magic = cpu_to_je16 (JFFS2_MAGIC_BITMASK);
 	cleanmarker.nodetype = cpu_to_je16 (JFFS2_NODETYPE_CLEANMARKER);
 	cleanmarker.totlen = cpu_to_je32(8);
-	cleanmarker.hdr_crc = cpu_to_je32(
-	crc32_no_comp(0, (unsigned char *) &cleanmarker,
-	sizeof(struct jffs2_unknown_node) - 4));
 
 	/* scrub option allows to erase badblock. To prevent internal
 	 * check from erase() method, set block check method to dummy
@@ -154,23 +148,21 @@ int nand_erase_opts(nand_info_t *meminfo, const nand_erase_options_t *opts)
 		}
 
 		/* format for JFFS2 ? */
-		if (opts->jffs2) {
-
-			chip->ops.len = chip->ops.ooblen = 64;
+		if (opts->jffs2 && chip->ecc.layout->oobavail >= 8) {
+			chip->ops.ooblen = 8;
 			chip->ops.datbuf = NULL;
-			chip->ops.oobbuf = buf;
-			chip->ops.ooboffs = chip->badblockpos & ~0x01;
+			chip->ops.oobbuf = (uint8_t *)&cleanmarker;
+			chip->ops.ooboffs = 0;
+			chip->ops.mode = MTD_OOB_AUTO;
 
 			result = meminfo->write_oob(meminfo,
-							erase.addr + meminfo->oobsize,
-							&chip->ops);
+			                            erase.addr,
+			                            &chip->ops);
 			if (result != 0) {
 				printf("\n%s: MTD writeoob failure: %d\n",
-				mtd_device, result);
+				       mtd_device, result);
 				continue;
 			}
-			else
-				printf("%s: MTD writeoob at 0x%08x\n",mtd_device, erase.addr + meminfo->oobsize );
 		}
 
 		if (!opts->quiet) {
@@ -190,11 +182,11 @@ int nand_erase_opts(nand_info_t *meminfo, const nand_erase_options_t *opts)
 				percent_complete = percent;
 
 				printf("\rErasing at 0x%x -- %3d%% complete.",
-				erase.addr, percent);
+				       erase.addr, percent);
 
 				if (opts->jffs2 && result == 0)
-				printf(" Cleanmarker written at 0x%x.",
-				erase.addr);
+					printf(" Cleanmarker written at 0x%x.",
+					       erase.addr);
 			}
 		}
 	}
@@ -495,11 +487,11 @@ int nand_write_skip_bad(nand_info_t *nand, size_t offset, size_t *length,
 
 	if (len_incl_bad == *length) {
 		rval = nand_write (nand, offset, length, buffer);
-		if (rval != 0) {
+		if (rval != 0)
 			printf ("NAND write to offset %x failed %d\n",
 				offset, rval);
-			return rval;
-		}
+
+		return rval;
 	}
 
 	while (left_to_write > 0) {
@@ -565,11 +557,11 @@ int nand_read_skip_bad(nand_info_t *nand, size_t offset, size_t *length,
 
 	if (len_incl_bad == *length) {
 		rval = nand_read (nand, offset, length, buffer);
-		if (rval != 0) {
+		if (rval != 0)
 			printf ("NAND read from offset %x failed %d\n",
 				offset, rval);
-			return rval;
-		}
+
+		return rval;
 	}
 
 	while (left_to_read > 0) {
diff --git a/drivers/mtd/nand/s3c64xx.c b/drivers/mtd/nand/s3c64xx.c
index 159fe76aa..edaf55a14 100644
--- a/drivers/mtd/nand/s3c64xx.c
+++ b/drivers/mtd/nand/s3c64xx.c
@@ -141,7 +141,7 @@ static int s3c_nand_device_ready(struct mtd_info *mtdinfo)
 	return !!(readl(NFSTAT) & NFSTAT_RnB);
 }
 
-#ifdef CFG_S3C_NAND_HWECC
+#ifdef CONFIG_SYS_S3C_NAND_HWECC
 /*
  * This function is called before encoding ecc codes to ready ecc engine.
  * Written by jsgood
@@ -256,7 +256,7 @@ static int s3c_nand_correct_data(struct mtd_info *mtd, u_char *dat,
 
 	return ret;
 }
-#endif /* CFG_S3C_NAND_HWECC */
+#endif /* CONFIG_SYS_S3C_NAND_HWECC */
 
 /*
  * Board-specific NAND initialization. The following members of the
@@ -297,7 +297,7 @@ int board_nand_init(struct nand_chip *nand)
 	nand->read_buf		= nand_read_buf;
 #endif
 
-#ifdef CFG_S3C_NAND_HWECC
+#ifdef CONFIG_SYS_S3C_NAND_HWECC
 	nand->ecc.hwctl		= s3c_nand_enable_hwecc;
 	nand->ecc.calculate	= s3c_nand_calculate_ecc;
 	nand->ecc.correct	= s3c_nand_correct_data;
@@ -307,11 +307,11 @@ int board_nand_init(struct nand_chip *nand)
 	 * board one day, it will get more complicated...
 	 */
 	nand->ecc.mode		= NAND_ECC_HW;
-	nand->ecc.size		= CFG_NAND_ECCSIZE;
-	nand->ecc.bytes		= CFG_NAND_ECCBYTES;
+	nand->ecc.size		= CONFIG_SYS_NAND_ECCSIZE;
+	nand->ecc.bytes		= CONFIG_SYS_NAND_ECCBYTES;
 #else
 	nand->ecc.mode		= NAND_ECC_SOFT;
-#endif /* ! CFG_S3C_NAND_HWECC */
+#endif /* ! CONFIG_SYS_S3C_NAND_HWECC */
 
 	nand->priv		= nand_cs + chip_n++;
 
diff --git a/drivers/mtd/nand_legacy/nand_legacy.c b/drivers/mtd/nand_legacy/nand_legacy.c
index bf5565a8f..407e901a3 100644
--- a/drivers/mtd/nand_legacy/nand_legacy.c
+++ b/drivers/mtd/nand_legacy/nand_legacy.c
@@ -66,7 +66,7 @@ struct nand_oob_config {
 	int eccvalid_pos;
 } oob_config = { {0}, 0, 0};
 
-struct nand_chip nand_dev_desc[CFG_MAX_NAND_DEVICE] = {{0}};
+struct nand_chip nand_dev_desc[CONFIG_SYS_MAX_NAND_DEVICE] = {{0}};
 
 int curr_device = -1; /* Current NAND Device */
 
@@ -982,7 +982,7 @@ static int nand_write_ecc (struct nand_chip* nand, size_t to, size_t len,
 #ifdef CONFIG_OMAP1510
 	archflashwp(0,0);
 #endif
-#ifdef CFG_NAND_WP
+#ifdef CONFIG_SYS_NAND_WP
 	NAND_WP_OFF();
 #endif
 
@@ -1036,7 +1036,7 @@ out:
 #ifdef CONFIG_OMAP1510
 	archflashwp(0,1);
 #endif
-#ifdef CFG_NAND_WP
+#ifdef CONFIG_SYS_NAND_WP
 	NAND_WP_ON();
 #endif
 
@@ -1235,7 +1235,7 @@ int nand_legacy_erase(struct nand_chip* nand, size_t ofs, size_t len, int clean)
 #ifdef CONFIG_OMAP1510
 	archflashwp(0,0);
 #endif
-#ifdef CFG_NAND_WP
+#ifdef CONFIG_SYS_NAND_WP
 	NAND_WP_OFF();
 #endif
     NAND_ENABLE_CE(nand);  /* set pin low */
@@ -1321,7 +1321,7 @@ out:
 #ifdef CONFIG_OMAP1510
 	archflashwp(0,1);
 #endif
-#ifdef CFG_NAND_WP
+#ifdef CONFIG_SYS_NAND_WP
 	NAND_WP_ON();
 #endif
 
@@ -1358,7 +1358,7 @@ unsigned long nand_probe(unsigned long physadr)
 #endif
 	oob_config.badblock_pos = 5;
 
-	for (i=0; i<CFG_MAX_NAND_DEVICE; i++) {
+	for (i=0; i<CONFIG_SYS_MAX_NAND_DEVICE; i++) {
 		if (nand_dev_desc[i].ChipID == NAND_ChipID_UNKNOWN) {
 			nand = &nand_dev_desc[i];
 			break;
diff --git a/drivers/mtd/onenand/onenand_base.c b/drivers/mtd/onenand/onenand_base.c
index c22a8a802..9b7bf3aa3 100644
--- a/drivers/mtd/onenand/onenand_base.c
+++ b/drivers/mtd/onenand/onenand_base.c
@@ -1428,7 +1428,7 @@ int onenand_erase(struct mtd_info *mtd, struct erase_info *instr)
 
 	MTDDEBUG (MTD_DEBUG_LEVEL3,
 		 "onenand_erase: start = 0x%08x, len = %i\n",
-		 (unsigned int)instr->addr, (unsigned int)ins tr->len);
+		 (unsigned int)instr->addr, (unsigned int)instr->len);
 
 	block_size = (1 << this->erase_shift);
 
diff --git a/drivers/mtd/onenand/onenand_uboot.c b/drivers/mtd/onenand/onenand_uboot.c
index d61445061..08082f3ed 100644
--- a/drivers/mtd/onenand/onenand_uboot.c
+++ b/drivers/mtd/onenand/onenand_uboot.c
@@ -26,7 +26,7 @@ void onenand_init(void)
 	memset(&onenand_mtd, 0, sizeof(struct mtd_info));
 	memset(&onenand_chip, 0, sizeof(struct onenand_chip));
 
-	onenand_chip.base = (void *) CFG_ONENAND_BASE;
+	onenand_chip.base = (void *) CONFIG_SYS_ONENAND_BASE;
 	onenand_mtd.priv = &onenand_chip;
 
 	onenand_scan(&onenand_mtd, 1);
diff --git a/drivers/mtd/spi/Makefile b/drivers/mtd/spi/Makefile
index af6af97d1..3d4f8923c 100644
--- a/drivers/mtd/spi/Makefile
+++ b/drivers/mtd/spi/Makefile
@@ -27,6 +27,7 @@ LIB	:= $(obj)libspi_flash.a
 
 COBJS-$(CONFIG_SPI_FLASH)	+= spi_flash.o
 COBJS-$(CONFIG_SPI_FLASH_ATMEL)	+= atmel.o
+COBJS-$(CONFIG_SPI_FLASH_STMICRO)	+= stmicro.o
 
 COBJS	:= $(COBJS-y)
 SRCS	:= $(COBJS:.o=.c)
diff --git a/drivers/mtd/spi/spi_flash.c b/drivers/mtd/spi/spi_flash.c
index d581cb3e8..d1d81af0e 100644
--- a/drivers/mtd/spi/spi_flash.c
+++ b/drivers/mtd/spi/spi_flash.c
@@ -134,6 +134,11 @@ struct spi_flash *spi_flash_probe(unsigned int bus, unsigned int cs,
 		flash = spi_flash_probe_atmel(spi, idcode);
 		break;
 #endif
+#ifdef CONFIG_SPI_FLASH_STMICRO
+	case 0x20:
+		flash = spi_flash_probe_stmicro(spi, idcode);
+		break;
+#endif
 	default:
 		debug("SF: Unsupported manufacturer %02X\n", idcode[0]);
 		flash = NULL;
diff --git a/drivers/mtd/spi/spi_flash_internal.h b/drivers/mtd/spi/spi_flash_internal.h
index 14380500a..75f5900dc 100644
--- a/drivers/mtd/spi/spi_flash_internal.h
+++ b/drivers/mtd/spi/spi_flash_internal.h
@@ -5,9 +5,9 @@
  */
 
 /* Common parameters */
-#define SPI_FLASH_PROG_TIMEOUT		((10 * CFG_HZ) / 1000)
-#define SPI_FLASH_PAGE_ERASE_TIMEOUT	((50 * CFG_HZ) / 1000)
-#define SPI_FLASH_SECTOR_ERASE_TIMEOUT	(10 * CFG_HZ)
+#define SPI_FLASH_PROG_TIMEOUT		((10 * CONFIG_SYS_HZ) / 1000)
+#define SPI_FLASH_PAGE_ERASE_TIMEOUT	((50 * CONFIG_SYS_HZ) / 1000)
+#define SPI_FLASH_SECTOR_ERASE_TIMEOUT	(10 * CONFIG_SYS_HZ)
 
 /* Common commands */
 #define CMD_READ_ID			0x9f
@@ -43,3 +43,4 @@ int spi_flash_read_common(struct spi_flash *flash, const u8 *cmd,
 /* Manufacturer-specific probe functions */
 struct spi_flash *spi_flash_probe_spansion(struct spi_slave *spi, u8 *idcode);
 struct spi_flash *spi_flash_probe_atmel(struct spi_slave *spi, u8 *idcode);
+struct spi_flash *spi_flash_probe_stmicro(struct spi_slave *spi, u8 *idcode);
diff --git a/drivers/mtd/spi/stmicro.c b/drivers/mtd/spi/stmicro.c
new file mode 100644
index 000000000..86324e4e1
--- /dev/null
+++ b/drivers/mtd/spi/stmicro.c
@@ -0,0 +1,356 @@
+/*
+ * (C) Copyright 2000-2002
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * Copyright 2008, Network Appliance Inc.
+ * Jason McMullan <mcmullan@netapp.com>
+ *
+ * Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
+ * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <malloc.h>
+#include <spi_flash.h>
+
+#include "spi_flash_internal.h"
+
+/* M25Pxx-specific commands */
+#define CMD_M25PXX_WREN		0x06	/* Write Enable */
+#define CMD_M25PXX_WRDI		0x04	/* Write Disable */
+#define CMD_M25PXX_RDSR		0x05	/* Read Status Register */
+#define CMD_M25PXX_WRSR		0x01	/* Write Status Register */
+#define CMD_M25PXX_READ		0x03	/* Read Data Bytes */
+#define CMD_M25PXX_FAST_READ	0x0b	/* Read Data Bytes at Higher Speed */
+#define CMD_M25PXX_PP		0x02	/* Page Program */
+#define CMD_M25PXX_SE		0xd8	/* Sector Erase */
+#define CMD_M25PXX_BE		0xc7	/* Bulk Erase */
+#define CMD_M25PXX_DP		0xb9	/* Deep Power-down */
+#define CMD_M25PXX_RES		0xab	/* Release from DP, and Read Signature */
+
+#define STM_ID_M25P16		0x15
+#define STM_ID_M25P20		0x12
+#define STM_ID_M25P32		0x16
+#define STM_ID_M25P40		0x13
+#define STM_ID_M25P64		0x17
+#define STM_ID_M25P80		0x14
+#define STM_ID_M25P128		0x18
+
+#define STMICRO_SR_WIP		(1 << 0)	/* Write-in-Progress */
+
+struct stmicro_spi_flash_params {
+	u8 idcode1;
+	u16 page_size;
+	u16 pages_per_sector;
+	u16 nr_sectors;
+	const char *name;
+};
+
+struct stmicro_spi_flash {
+	const struct stmicro_spi_flash_params *params;
+	struct spi_flash flash;
+};
+
+static inline struct stmicro_spi_flash *to_stmicro_spi_flash(struct spi_flash
+							     *flash)
+{
+	return container_of(flash, struct stmicro_spi_flash, flash);
+}
+
+static const struct stmicro_spi_flash_params stmicro_spi_flash_table[] = {
+	{
+		.idcode1 = STM_ID_M25P16,
+		.page_size = 256,
+		.pages_per_sector = 256,
+		.nr_sectors = 32,
+		.name = "M25P16",
+	},
+	{
+		.idcode1 = STM_ID_M25P20,
+		.page_size = 256,
+		.pages_per_sector = 256,
+		.nr_sectors = 4,
+		.name = "M25P20",
+	},
+	{
+		.idcode1 = STM_ID_M25P32,
+		.page_size = 256,
+		.pages_per_sector = 256,
+		.nr_sectors = 64,
+		.name = "M25P32",
+	},
+	{
+		.idcode1 = STM_ID_M25P40,
+		.page_size = 256,
+		.pages_per_sector = 256,
+		.nr_sectors = 8,
+		.name = "M25P40",
+	},
+	{
+		.idcode1 = STM_ID_M25P64,
+		.page_size = 256,
+		.pages_per_sector = 256,
+		.nr_sectors = 128,
+		.name = "M25P64",
+	},
+	{
+		.idcode1 = STM_ID_M25P80,
+		.page_size = 256,
+		.pages_per_sector = 256,
+		.nr_sectors = 16,
+		.name = "M25P80",
+	},
+	{
+		.idcode1 = STM_ID_M25P128,
+		.page_size = 256,
+		.pages_per_sector = 1024,
+		.nr_sectors = 64,
+		.name = "M25P128",
+	},
+};
+
+static int stmicro_wait_ready(struct spi_flash *flash, unsigned long timeout)
+{
+	struct spi_slave *spi = flash->spi;
+	unsigned long timebase;
+	int ret;
+	u8 status;
+	u8 cmd[4] = { CMD_M25PXX_RDSR, 0xff, 0xff, 0xff };
+
+	ret = spi_xfer(spi, 32, &cmd[0], NULL, SPI_XFER_BEGIN);
+	if (ret) {
+		debug("SF: Failed to send command %02x: %d\n", cmd[0], ret);
+		return ret;
+	}
+
+	timebase = get_timer(0);
+	do {
+		ret = spi_xfer(spi, 8, NULL, &status, 0);
+		if (ret)
+			return -1;
+
+		if ((status & STMICRO_SR_WIP) == 0)
+			break;
+
+	} while (get_timer(timebase) < timeout);
+
+	spi_xfer(spi, 0, NULL, NULL, SPI_XFER_END);
+
+	if ((status & STMICRO_SR_WIP) == 0)
+		return 0;
+
+	/* Timed out */
+	return -1;
+}
+
+static int stmicro_read_fast(struct spi_flash *flash,
+			     u32 offset, size_t len, void *buf)
+{
+	struct stmicro_spi_flash *stm = to_stmicro_spi_flash(flash);
+	unsigned long page_addr;
+	unsigned long page_size;
+	u8 cmd[5];
+
+	page_size = stm->params->page_size;
+	page_addr = offset / page_size;
+
+	cmd[0] = CMD_READ_ARRAY_FAST;
+	cmd[1] = page_addr >> 8;
+	cmd[2] = page_addr;
+	cmd[3] = offset % page_size;
+	cmd[4] = 0x00;
+
+	return spi_flash_read_common(flash, cmd, sizeof(cmd), buf, len);
+}
+
+static int stmicro_write(struct spi_flash *flash,
+			 u32 offset, size_t len, const void *buf)
+{
+	struct stmicro_spi_flash *stm = to_stmicro_spi_flash(flash);
+	unsigned long page_addr;
+	unsigned long byte_addr;
+	unsigned long page_size;
+	size_t chunk_len;
+	size_t actual;
+	int ret;
+	u8 cmd[4];
+
+	page_size = stm->params->page_size;
+	page_addr = offset / page_size;
+	byte_addr = offset % page_size;
+
+	ret = spi_claim_bus(flash->spi);
+	if (ret) {
+		debug("SF: Unable to claim SPI bus\n");
+		return ret;
+	}
+
+	ret = 0;
+	for (actual = 0; actual < len; actual += chunk_len) {
+		chunk_len = min(len - actual, page_size - byte_addr);
+
+		cmd[0] = CMD_M25PXX_PP;
+		cmd[1] = page_addr >> 8;
+		cmd[2] = page_addr;
+		cmd[3] = byte_addr;
+
+		debug
+		    ("PP: 0x%p => cmd = { 0x%02x 0x%02x%02x%02x } chunk_len = %d\n",
+		     buf + actual, cmd[0], cmd[1], cmd[2], cmd[3], chunk_len);
+
+		ret = spi_flash_cmd(flash->spi, CMD_M25PXX_WREN, NULL, 0);
+		if (ret < 0) {
+			debug("SF: Enabling Write failed\n");
+			break;
+		}
+
+		ret = spi_flash_cmd_write(flash->spi, cmd, 4,
+					  buf + actual, chunk_len);
+		if (ret < 0) {
+			debug("SF: STMicro Page Program failed\n");
+			break;
+		}
+
+		ret = stmicro_wait_ready(flash, SPI_FLASH_PROG_TIMEOUT);
+		if (ret < 0) {
+			debug("SF: STMicro page programming timed out\n");
+			break;
+		}
+
+		page_addr++;
+		byte_addr = 0;
+	}
+
+	debug("SF: STMicro: Successfully programmed %u bytes @ 0x%x\n",
+	      len, offset);
+
+	spi_release_bus(flash->spi);
+	return ret;
+}
+
+int stmicro_erase(struct spi_flash *flash, u32 offset, size_t len)
+{
+	struct stmicro_spi_flash *stm = to_stmicro_spi_flash(flash);
+	unsigned long sector_size;
+	size_t actual;
+	int ret;
+	u8 cmd[4];
+
+	/*
+	 * This function currently uses sector erase only.
+	 * probably speed things up by using bulk erase
+	 * when possible.
+	 */
+
+	sector_size = stm->params->page_size * stm->params->pages_per_sector;
+
+	if (offset % sector_size || len % sector_size) {
+		debug("SF: Erase offset/length not multiple of sector size\n");
+		return -1;
+	}
+
+	len /= sector_size;
+	cmd[0] = CMD_M25PXX_SE;
+	cmd[2] = 0x00;
+	cmd[3] = 0x00;
+
+	ret = spi_claim_bus(flash->spi);
+	if (ret) {
+		debug("SF: Unable to claim SPI bus\n");
+		return ret;
+	}
+
+	ret = 0;
+	for (actual = 0; actual < len; actual++) {
+		cmd[1] = (offset / sector_size) + actual;
+
+		ret = spi_flash_cmd(flash->spi, CMD_M25PXX_WREN, NULL, 0);
+		if (ret < 0) {
+			debug("SF: Enabling Write failed\n");
+			break;
+		}
+
+		ret = spi_flash_cmd_write(flash->spi, cmd, 4, NULL, 0);
+		if (ret < 0) {
+			debug("SF: STMicro page erase failed\n");
+			break;
+		}
+
+		/* Up to 2 seconds */
+		ret = stmicro_wait_ready(flash, 2 * CONFIG_SYS_HZ);
+		if (ret < 0) {
+			debug("SF: STMicro page erase timed out\n");
+			break;
+		}
+	}
+
+	debug("SF: STMicro: Successfully erased %u bytes @ 0x%x\n",
+	      len * sector_size, offset);
+
+	spi_release_bus(flash->spi);
+	return ret;
+}
+
+struct spi_flash *spi_flash_probe_stmicro(struct spi_slave *spi, u8 * idcode)
+{
+	const struct stmicro_spi_flash_params *params;
+	struct stmicro_spi_flash *stm;
+	unsigned int i;
+	int ret;
+	u8 id[3];
+
+	ret = spi_flash_cmd(spi, CMD_READ_ID, id, sizeof(id));
+	if (ret)
+		return NULL;
+
+	for (i = 0; i < ARRAY_SIZE(stmicro_spi_flash_table); i++) {
+		params = &stmicro_spi_flash_table[i];
+		if (params->idcode1 == idcode[2]) {
+			break;
+		}
+	}
+
+	if (i == ARRAY_SIZE(stmicro_spi_flash_table)) {
+		debug("SF: Unsupported STMicro ID %02x\n", id[1]);
+		return NULL;
+	}
+
+	stm = malloc(sizeof(struct stmicro_spi_flash));
+	if (!stm) {
+		debug("SF: Failed to allocate memory\n");
+		return NULL;
+	}
+
+	stm->params = params;
+	stm->flash.spi = spi;
+	stm->flash.name = params->name;
+
+	stm->flash.write = stmicro_write;
+	stm->flash.erase = stmicro_erase;
+	stm->flash.read = stmicro_read_fast;
+	stm->flash.size = params->page_size * params->pages_per_sector
+	    * params->nr_sectors;
+
+	debug("SF: Detected %s with page size %u, total %u bytes\n",
+	      params->name, params->page_size, stm->flash.size);
+
+	return &stm->flash;
+}
diff --git a/drivers/mtd/ubi/Makefile b/drivers/mtd/ubi/Makefile
new file mode 100644
index 000000000..8bd82c353
--- /dev/null
+++ b/drivers/mtd/ubi/Makefile
@@ -0,0 +1,51 @@
+#
+# (C) Copyright 2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB 	:= $(obj)libubi.a
+
+ifdef CONFIG_CMD_UBI
+COBJS-y += build.o vtbl.o vmt.o upd.o kapi.o eba.o io.o wl.o scan.o crc32.o
+
+COBJS-y += misc.o
+COBJS-y += debug.o
+endif
+
+COBJS	:= $(COBJS-y)
+SRCS 	:= $(COBJS:.o=.c)
+OBJS 	:= $(addprefix $(obj),$(COBJS))
+
+all:	$(LIB)
+
+$(LIB):	$(obj).depend $(OBJS)
+	$(AR) $(ARFLAGS) $@ $(OBJS)
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/drivers/mtd/ubi/build.c b/drivers/mtd/ubi/build.c
new file mode 100644
index 000000000..f4b01a9de
--- /dev/null
+++ b/drivers/mtd/ubi/build.c
@@ -0,0 +1,1188 @@
+/*
+ * Copyright (c) International Business Machines Corp., 2006
+ * Copyright (c) Nokia Corporation, 2007
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ * Author: Artem Bityutskiy (Битюцкий �ртём),
+ *         Frank Haverkamp
+ */
+
+/*
+ * This file includes UBI initialization and building of UBI devices.
+ *
+ * When UBI is initialized, it attaches all the MTD devices specified as the
+ * module load parameters or the kernel boot parameters. If MTD devices were
+ * specified, UBI does not attach any MTD device, but it is possible to do
+ * later using the "UBI control device".
+ *
+ * At the moment we only attach UBI devices by scanning, which will become a
+ * bottleneck when flashes reach certain large size. Then one may improve UBI
+ * and add other methods, although it does not seem to be easy to do.
+ */
+
+#ifdef UBI_LINUX
+#include <linux/err.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/stringify.h>
+#include <linux/stat.h>
+#include <linux/miscdevice.h>
+#include <linux/log2.h>
+#include <linux/kthread.h>
+#endif
+#include <ubi_uboot.h>
+#include "ubi.h"
+
+/* Maximum length of the 'mtd=' parameter */
+#define MTD_PARAM_LEN_MAX 64
+
+/**
+ * struct mtd_dev_param - MTD device parameter description data structure.
+ * @name: MTD device name or number string
+ * @vid_hdr_offs: VID header offset
+ */
+struct mtd_dev_param
+{
+	char name[MTD_PARAM_LEN_MAX];
+	int vid_hdr_offs;
+};
+
+/* Numbers of elements set in the @mtd_dev_param array */
+static int mtd_devs = 0;
+
+/* MTD devices specification parameters */
+static struct mtd_dev_param mtd_dev_param[UBI_MAX_DEVICES];
+
+/* Root UBI "class" object (corresponds to '/<sysfs>/class/ubi/') */
+struct class *ubi_class;
+
+#ifdef UBI_LINUX
+/* Slab cache for wear-leveling entries */
+struct kmem_cache *ubi_wl_entry_slab;
+
+/* UBI control character device */
+static struct miscdevice ubi_ctrl_cdev = {
+	.minor = MISC_DYNAMIC_MINOR,
+	.name = "ubi_ctrl",
+	.fops = &ubi_ctrl_cdev_operations,
+};
+#endif
+
+/* All UBI devices in system */
+struct ubi_device *ubi_devices[UBI_MAX_DEVICES];
+
+#ifdef UBI_LINUX
+/* Serializes UBI devices creations and removals */
+DEFINE_MUTEX(ubi_devices_mutex);
+
+/* Protects @ubi_devices and @ubi->ref_count */
+static DEFINE_SPINLOCK(ubi_devices_lock);
+
+/* "Show" method for files in '/<sysfs>/class/ubi/' */
+static ssize_t ubi_version_show(struct class *class, char *buf)
+{
+	return sprintf(buf, "%d\n", UBI_VERSION);
+}
+
+/* UBI version attribute ('/<sysfs>/class/ubi/version') */
+static struct class_attribute ubi_version =
+	__ATTR(version, S_IRUGO, ubi_version_show, NULL);
+
+static ssize_t dev_attribute_show(struct device *dev,
+				  struct device_attribute *attr, char *buf);
+
+/* UBI device attributes (correspond to files in '/<sysfs>/class/ubi/ubiX') */
+static struct device_attribute dev_eraseblock_size =
+	__ATTR(eraseblock_size, S_IRUGO, dev_attribute_show, NULL);
+static struct device_attribute dev_avail_eraseblocks =
+	__ATTR(avail_eraseblocks, S_IRUGO, dev_attribute_show, NULL);
+static struct device_attribute dev_total_eraseblocks =
+	__ATTR(total_eraseblocks, S_IRUGO, dev_attribute_show, NULL);
+static struct device_attribute dev_volumes_count =
+	__ATTR(volumes_count, S_IRUGO, dev_attribute_show, NULL);
+static struct device_attribute dev_max_ec =
+	__ATTR(max_ec, S_IRUGO, dev_attribute_show, NULL);
+static struct device_attribute dev_reserved_for_bad =
+	__ATTR(reserved_for_bad, S_IRUGO, dev_attribute_show, NULL);
+static struct device_attribute dev_bad_peb_count =
+	__ATTR(bad_peb_count, S_IRUGO, dev_attribute_show, NULL);
+static struct device_attribute dev_max_vol_count =
+	__ATTR(max_vol_count, S_IRUGO, dev_attribute_show, NULL);
+static struct device_attribute dev_min_io_size =
+	__ATTR(min_io_size, S_IRUGO, dev_attribute_show, NULL);
+static struct device_attribute dev_bgt_enabled =
+	__ATTR(bgt_enabled, S_IRUGO, dev_attribute_show, NULL);
+static struct device_attribute dev_mtd_num =
+	__ATTR(mtd_num, S_IRUGO, dev_attribute_show, NULL);
+#endif
+
+/**
+ * ubi_get_device - get UBI device.
+ * @ubi_num: UBI device number
+ *
+ * This function returns UBI device description object for UBI device number
+ * @ubi_num, or %NULL if the device does not exist. This function increases the
+ * device reference count to prevent removal of the device. In other words, the
+ * device cannot be removed if its reference count is not zero.
+ */
+struct ubi_device *ubi_get_device(int ubi_num)
+{
+	struct ubi_device *ubi;
+
+	spin_lock(&ubi_devices_lock);
+	ubi = ubi_devices[ubi_num];
+	if (ubi) {
+		ubi_assert(ubi->ref_count >= 0);
+		ubi->ref_count += 1;
+		get_device(&ubi->dev);
+	}
+	spin_unlock(&ubi_devices_lock);
+
+	return ubi;
+}
+
+/**
+ * ubi_put_device - drop an UBI device reference.
+ * @ubi: UBI device description object
+ */
+void ubi_put_device(struct ubi_device *ubi)
+{
+	spin_lock(&ubi_devices_lock);
+	ubi->ref_count -= 1;
+	put_device(&ubi->dev);
+	spin_unlock(&ubi_devices_lock);
+}
+
+/**
+ * ubi_get_by_major - get UBI device description object by character device
+ *                    major number.
+ * @major: major number
+ *
+ * This function is similar to 'ubi_get_device()', but it searches the device
+ * by its major number.
+ */
+struct ubi_device *ubi_get_by_major(int major)
+{
+	int i;
+	struct ubi_device *ubi;
+
+	spin_lock(&ubi_devices_lock);
+	for (i = 0; i < UBI_MAX_DEVICES; i++) {
+		ubi = ubi_devices[i];
+		if (ubi && MAJOR(ubi->cdev.dev) == major) {
+			ubi_assert(ubi->ref_count >= 0);
+			ubi->ref_count += 1;
+			get_device(&ubi->dev);
+			spin_unlock(&ubi_devices_lock);
+			return ubi;
+		}
+	}
+	spin_unlock(&ubi_devices_lock);
+
+	return NULL;
+}
+
+/**
+ * ubi_major2num - get UBI device number by character device major number.
+ * @major: major number
+ *
+ * This function searches UBI device number object by its major number. If UBI
+ * device was not found, this function returns -ENODEV, otherwise the UBI device
+ * number is returned.
+ */
+int ubi_major2num(int major)
+{
+	int i, ubi_num = -ENODEV;
+
+	spin_lock(&ubi_devices_lock);
+	for (i = 0; i < UBI_MAX_DEVICES; i++) {
+		struct ubi_device *ubi = ubi_devices[i];
+
+		if (ubi && MAJOR(ubi->cdev.dev) == major) {
+			ubi_num = ubi->ubi_num;
+			break;
+		}
+	}
+	spin_unlock(&ubi_devices_lock);
+
+	return ubi_num;
+}
+
+#ifdef UBI_LINUX
+/* "Show" method for files in '/<sysfs>/class/ubi/ubiX/' */
+static ssize_t dev_attribute_show(struct device *dev,
+				  struct device_attribute *attr, char *buf)
+{
+	ssize_t ret;
+	struct ubi_device *ubi;
+
+	/*
+	 * The below code looks weird, but it actually makes sense. We get the
+	 * UBI device reference from the contained 'struct ubi_device'. But it
+	 * is unclear if the device was removed or not yet. Indeed, if the
+	 * device was removed before we increased its reference count,
+	 * 'ubi_get_device()' will return -ENODEV and we fail.
+	 *
+	 * Remember, 'struct ubi_device' is freed in the release function, so
+	 * we still can use 'ubi->ubi_num'.
+	 */
+	ubi = container_of(dev, struct ubi_device, dev);
+	ubi = ubi_get_device(ubi->ubi_num);
+	if (!ubi)
+		return -ENODEV;
+
+	if (attr == &dev_eraseblock_size)
+		ret = sprintf(buf, "%d\n", ubi->leb_size);
+	else if (attr == &dev_avail_eraseblocks)
+		ret = sprintf(buf, "%d\n", ubi->avail_pebs);
+	else if (attr == &dev_total_eraseblocks)
+		ret = sprintf(buf, "%d\n", ubi->good_peb_count);
+	else if (attr == &dev_volumes_count)
+		ret = sprintf(buf, "%d\n", ubi->vol_count - UBI_INT_VOL_COUNT);
+	else if (attr == &dev_max_ec)
+		ret = sprintf(buf, "%d\n", ubi->max_ec);
+	else if (attr == &dev_reserved_for_bad)
+		ret = sprintf(buf, "%d\n", ubi->beb_rsvd_pebs);
+	else if (attr == &dev_bad_peb_count)
+		ret = sprintf(buf, "%d\n", ubi->bad_peb_count);
+	else if (attr == &dev_max_vol_count)
+		ret = sprintf(buf, "%d\n", ubi->vtbl_slots);
+	else if (attr == &dev_min_io_size)
+		ret = sprintf(buf, "%d\n", ubi->min_io_size);
+	else if (attr == &dev_bgt_enabled)
+		ret = sprintf(buf, "%d\n", ubi->thread_enabled);
+	else if (attr == &dev_mtd_num)
+		ret = sprintf(buf, "%d\n", ubi->mtd->index);
+	else
+		ret = -EINVAL;
+
+	ubi_put_device(ubi);
+	return ret;
+}
+
+/* Fake "release" method for UBI devices */
+static void dev_release(struct device *dev) { }
+
+/**
+ * ubi_sysfs_init - initialize sysfs for an UBI device.
+ * @ubi: UBI device description object
+ *
+ * This function returns zero in case of success and a negative error code in
+ * case of failure.
+ */
+static int ubi_sysfs_init(struct ubi_device *ubi)
+{
+	int err;
+
+	ubi->dev.release = dev_release;
+	ubi->dev.devt = ubi->cdev.dev;
+	ubi->dev.class = ubi_class;
+	sprintf(&ubi->dev.bus_id[0], UBI_NAME_STR"%d", ubi->ubi_num);
+	err = device_register(&ubi->dev);
+	if (err)
+		return err;
+
+	err = device_create_file(&ubi->dev, &dev_eraseblock_size);
+	if (err)
+		return err;
+	err = device_create_file(&ubi->dev, &dev_avail_eraseblocks);
+	if (err)
+		return err;
+	err = device_create_file(&ubi->dev, &dev_total_eraseblocks);
+	if (err)
+		return err;
+	err = device_create_file(&ubi->dev, &dev_volumes_count);
+	if (err)
+		return err;
+	err = device_create_file(&ubi->dev, &dev_max_ec);
+	if (err)
+		return err;
+	err = device_create_file(&ubi->dev, &dev_reserved_for_bad);
+	if (err)
+		return err;
+	err = device_create_file(&ubi->dev, &dev_bad_peb_count);
+	if (err)
+		return err;
+	err = device_create_file(&ubi->dev, &dev_max_vol_count);
+	if (err)
+		return err;
+	err = device_create_file(&ubi->dev, &dev_min_io_size);
+	if (err)
+		return err;
+	err = device_create_file(&ubi->dev, &dev_bgt_enabled);
+	if (err)
+		return err;
+	err = device_create_file(&ubi->dev, &dev_mtd_num);
+	return err;
+}
+
+/**
+ * ubi_sysfs_close - close sysfs for an UBI device.
+ * @ubi: UBI device description object
+ */
+static void ubi_sysfs_close(struct ubi_device *ubi)
+{
+	device_remove_file(&ubi->dev, &dev_mtd_num);
+	device_remove_file(&ubi->dev, &dev_bgt_enabled);
+	device_remove_file(&ubi->dev, &dev_min_io_size);
+	device_remove_file(&ubi->dev, &dev_max_vol_count);
+	device_remove_file(&ubi->dev, &dev_bad_peb_count);
+	device_remove_file(&ubi->dev, &dev_reserved_for_bad);
+	device_remove_file(&ubi->dev, &dev_max_ec);
+	device_remove_file(&ubi->dev, &dev_volumes_count);
+	device_remove_file(&ubi->dev, &dev_total_eraseblocks);
+	device_remove_file(&ubi->dev, &dev_avail_eraseblocks);
+	device_remove_file(&ubi->dev, &dev_eraseblock_size);
+	device_unregister(&ubi->dev);
+}
+#endif
+
+/**
+ * kill_volumes - destroy all volumes.
+ * @ubi: UBI device description object
+ */
+static void kill_volumes(struct ubi_device *ubi)
+{
+	int i;
+
+	for (i = 0; i < ubi->vtbl_slots; i++)
+		if (ubi->volumes[i])
+			ubi_free_volume(ubi, ubi->volumes[i]);
+}
+
+/**
+ * uif_init - initialize user interfaces for an UBI device.
+ * @ubi: UBI device description object
+ *
+ * This function returns zero in case of success and a negative error code in
+ * case of failure.
+ */
+static int uif_init(struct ubi_device *ubi)
+{
+	int i, err;
+#ifdef UBI_LINUX
+	dev_t dev;
+#endif
+
+	sprintf(ubi->ubi_name, UBI_NAME_STR "%d", ubi->ubi_num);
+
+	/*
+	 * Major numbers for the UBI character devices are allocated
+	 * dynamically. Major numbers of volume character devices are
+	 * equivalent to ones of the corresponding UBI character device. Minor
+	 * numbers of UBI character devices are 0, while minor numbers of
+	 * volume character devices start from 1. Thus, we allocate one major
+	 * number and ubi->vtbl_slots + 1 minor numbers.
+	 */
+	err = alloc_chrdev_region(&dev, 0, ubi->vtbl_slots + 1, ubi->ubi_name);
+	if (err) {
+		ubi_err("cannot register UBI character devices");
+		return err;
+	}
+
+	ubi_assert(MINOR(dev) == 0);
+	cdev_init(&ubi->cdev, &ubi_cdev_operations);
+	dbg_msg("%s major is %u", ubi->ubi_name, MAJOR(dev));
+	ubi->cdev.owner = THIS_MODULE;
+
+	err = cdev_add(&ubi->cdev, dev, 1);
+	if (err) {
+		ubi_err("cannot add character device");
+		goto out_unreg;
+	}
+
+	err = ubi_sysfs_init(ubi);
+	if (err)
+		goto out_sysfs;
+
+	for (i = 0; i < ubi->vtbl_slots; i++)
+		if (ubi->volumes[i]) {
+			err = ubi_add_volume(ubi, ubi->volumes[i]);
+			if (err) {
+				ubi_err("cannot add volume %d", i);
+				goto out_volumes;
+			}
+		}
+
+	return 0;
+
+out_volumes:
+	kill_volumes(ubi);
+out_sysfs:
+	ubi_sysfs_close(ubi);
+	cdev_del(&ubi->cdev);
+out_unreg:
+	unregister_chrdev_region(ubi->cdev.dev, ubi->vtbl_slots + 1);
+	ubi_err("cannot initialize UBI %s, error %d", ubi->ubi_name, err);
+	return err;
+}
+
+/**
+ * uif_close - close user interfaces for an UBI device.
+ * @ubi: UBI device description object
+ */
+static void uif_close(struct ubi_device *ubi)
+{
+	kill_volumes(ubi);
+	ubi_sysfs_close(ubi);
+	cdev_del(&ubi->cdev);
+	unregister_chrdev_region(ubi->cdev.dev, ubi->vtbl_slots + 1);
+}
+
+/**
+ * attach_by_scanning - attach an MTD device using scanning method.
+ * @ubi: UBI device descriptor
+ *
+ * This function returns zero in case of success and a negative error code in
+ * case of failure.
+ *
+ * Note, currently this is the only method to attach UBI devices. Hopefully in
+ * the future we'll have more scalable attaching methods and avoid full media
+ * scanning. But even in this case scanning will be needed as a fall-back
+ * attaching method if there are some on-flash table corruptions.
+ */
+static int attach_by_scanning(struct ubi_device *ubi)
+{
+	int err;
+	struct ubi_scan_info *si;
+
+	si = ubi_scan(ubi);
+	if (IS_ERR(si))
+		return PTR_ERR(si);
+
+	ubi->bad_peb_count = si->bad_peb_count;
+	ubi->good_peb_count = ubi->peb_count - ubi->bad_peb_count;
+	ubi->max_ec = si->max_ec;
+	ubi->mean_ec = si->mean_ec;
+
+	err = ubi_read_volume_table(ubi, si);
+	if (err)
+		goto out_si;
+
+	err = ubi_wl_init_scan(ubi, si);
+	if (err)
+		goto out_vtbl;
+
+	err = ubi_eba_init_scan(ubi, si);
+	if (err)
+		goto out_wl;
+
+	ubi_scan_destroy_si(si);
+	return 0;
+
+out_wl:
+	ubi_wl_close(ubi);
+out_vtbl:
+	vfree(ubi->vtbl);
+out_si:
+	ubi_scan_destroy_si(si);
+	return err;
+}
+
+/**
+ * io_init - initialize I/O unit for a given UBI device.
+ * @ubi: UBI device description object
+ *
+ * If @ubi->vid_hdr_offset or @ubi->leb_start is zero, default offsets are
+ * assumed:
+ *   o EC header is always at offset zero - this cannot be changed;
+ *   o VID header starts just after the EC header at the closest address
+ *     aligned to @io->hdrs_min_io_size;
+ *   o data starts just after the VID header at the closest address aligned to
+ *     @io->min_io_size
+ *
+ * This function returns zero in case of success and a negative error code in
+ * case of failure.
+ */
+static int io_init(struct ubi_device *ubi)
+{
+	if (ubi->mtd->numeraseregions != 0) {
+		/*
+		 * Some flashes have several erase regions. Different regions
+		 * may have different eraseblock size and other
+		 * characteristics. It looks like mostly multi-region flashes
+		 * have one "main" region and one or more small regions to
+		 * store boot loader code or boot parameters or whatever. I
+		 * guess we should just pick the largest region. But this is
+		 * not implemented.
+		 */
+		ubi_err("multiple regions, not implemented");
+		return -EINVAL;
+	}
+
+	if (ubi->vid_hdr_offset < 0)
+		return -EINVAL;
+
+	/*
+	 * Note, in this implementation we support MTD devices with 0x7FFFFFFF
+	 * physical eraseblocks maximum.
+	 */
+
+	ubi->peb_size   = ubi->mtd->erasesize;
+	ubi->peb_count  = ubi->mtd->size / ubi->mtd->erasesize;
+	ubi->flash_size = ubi->mtd->size;
+
+	if (ubi->mtd->block_isbad && ubi->mtd->block_markbad)
+		ubi->bad_allowed = 1;
+
+	ubi->min_io_size = ubi->mtd->writesize;
+	ubi->hdrs_min_io_size = ubi->mtd->writesize >> ubi->mtd->subpage_sft;
+
+	/*
+	 * Make sure minimal I/O unit is power of 2. Note, there is no
+	 * fundamental reason for this assumption. It is just an optimization
+	 * which allows us to avoid costly division operations.
+	 */
+	if (!is_power_of_2(ubi->min_io_size)) {
+		ubi_err("min. I/O unit (%d) is not power of 2",
+			ubi->min_io_size);
+		return -EINVAL;
+	}
+
+	ubi_assert(ubi->hdrs_min_io_size > 0);
+	ubi_assert(ubi->hdrs_min_io_size <= ubi->min_io_size);
+	ubi_assert(ubi->min_io_size % ubi->hdrs_min_io_size == 0);
+
+	/* Calculate default aligned sizes of EC and VID headers */
+	ubi->ec_hdr_alsize = ALIGN(UBI_EC_HDR_SIZE, ubi->hdrs_min_io_size);
+	ubi->vid_hdr_alsize = ALIGN(UBI_VID_HDR_SIZE, ubi->hdrs_min_io_size);
+
+	dbg_msg("min_io_size      %d", ubi->min_io_size);
+	dbg_msg("hdrs_min_io_size %d", ubi->hdrs_min_io_size);
+	dbg_msg("ec_hdr_alsize    %d", ubi->ec_hdr_alsize);
+	dbg_msg("vid_hdr_alsize   %d", ubi->vid_hdr_alsize);
+
+	if (ubi->vid_hdr_offset == 0)
+		/* Default offset */
+		ubi->vid_hdr_offset = ubi->vid_hdr_aloffset =
+				      ubi->ec_hdr_alsize;
+	else {
+		ubi->vid_hdr_aloffset = ubi->vid_hdr_offset &
+						~(ubi->hdrs_min_io_size - 1);
+		ubi->vid_hdr_shift = ubi->vid_hdr_offset -
+						ubi->vid_hdr_aloffset;
+	}
+
+	/* Similar for the data offset */
+	ubi->leb_start = ubi->vid_hdr_offset + UBI_EC_HDR_SIZE;
+	ubi->leb_start = ALIGN(ubi->leb_start, ubi->min_io_size);
+
+	dbg_msg("vid_hdr_offset   %d", ubi->vid_hdr_offset);
+	dbg_msg("vid_hdr_aloffset %d", ubi->vid_hdr_aloffset);
+	dbg_msg("vid_hdr_shift    %d", ubi->vid_hdr_shift);
+	dbg_msg("leb_start        %d", ubi->leb_start);
+
+	/* The shift must be aligned to 32-bit boundary */
+	if (ubi->vid_hdr_shift % 4) {
+		ubi_err("unaligned VID header shift %d",
+			ubi->vid_hdr_shift);
+		return -EINVAL;
+	}
+
+	/* Check sanity */
+	if (ubi->vid_hdr_offset < UBI_EC_HDR_SIZE ||
+	    ubi->leb_start < ubi->vid_hdr_offset + UBI_VID_HDR_SIZE ||
+	    ubi->leb_start > ubi->peb_size - UBI_VID_HDR_SIZE ||
+	    ubi->leb_start & (ubi->min_io_size - 1)) {
+		ubi_err("bad VID header (%d) or data offsets (%d)",
+			ubi->vid_hdr_offset, ubi->leb_start);
+		return -EINVAL;
+	}
+
+	/*
+	 * It may happen that EC and VID headers are situated in one minimal
+	 * I/O unit. In this case we can only accept this UBI image in
+	 * read-only mode.
+	 */
+	if (ubi->vid_hdr_offset + UBI_VID_HDR_SIZE <= ubi->hdrs_min_io_size) {
+		ubi_warn("EC and VID headers are in the same minimal I/O unit, "
+			 "switch to read-only mode");
+		ubi->ro_mode = 1;
+	}
+
+	ubi->leb_size = ubi->peb_size - ubi->leb_start;
+
+	if (!(ubi->mtd->flags & MTD_WRITEABLE)) {
+		ubi_msg("MTD device %d is write-protected, attach in "
+			"read-only mode", ubi->mtd->index);
+		ubi->ro_mode = 1;
+	}
+
+	ubi_msg("physical eraseblock size:   %d bytes (%d KiB)",
+		ubi->peb_size, ubi->peb_size >> 10);
+	ubi_msg("logical eraseblock size:    %d bytes", ubi->leb_size);
+	ubi_msg("smallest flash I/O unit:    %d", ubi->min_io_size);
+	if (ubi->hdrs_min_io_size != ubi->min_io_size)
+		ubi_msg("sub-page size:              %d",
+			ubi->hdrs_min_io_size);
+	ubi_msg("VID header offset:          %d (aligned %d)",
+		ubi->vid_hdr_offset, ubi->vid_hdr_aloffset);
+	ubi_msg("data offset:                %d", ubi->leb_start);
+
+	/*
+	 * Note, ideally, we have to initialize ubi->bad_peb_count here. But
+	 * unfortunately, MTD does not provide this information. We should loop
+	 * over all physical eraseblocks and invoke mtd->block_is_bad() for
+	 * each physical eraseblock. So, we skip ubi->bad_peb_count
+	 * uninitialized and initialize it after scanning.
+	 */
+
+	return 0;
+}
+
+/**
+ * autoresize - re-size the volume which has the "auto-resize" flag set.
+ * @ubi: UBI device description object
+ * @vol_id: ID of the volume to re-size
+ *
+ * This function re-sizes the volume marked by the @UBI_VTBL_AUTORESIZE_FLG in
+ * the volume table to the largest possible size. See comments in ubi-header.h
+ * for more description of the flag. Returns zero in case of success and a
+ * negative error code in case of failure.
+ */
+static int autoresize(struct ubi_device *ubi, int vol_id)
+{
+	struct ubi_volume_desc desc;
+	struct ubi_volume *vol = ubi->volumes[vol_id];
+	int err, old_reserved_pebs = vol->reserved_pebs;
+
+	/*
+	 * Clear the auto-resize flag in the volume in-memory copy of the
+	 * volume table, and 'ubi_resize_volume()' will propogate this change
+	 * to the flash.
+	 */
+	ubi->vtbl[vol_id].flags &= ~UBI_VTBL_AUTORESIZE_FLG;
+
+	if (ubi->avail_pebs == 0) {
+		struct ubi_vtbl_record vtbl_rec;
+
+		/*
+		 * No avalilable PEBs to re-size the volume, clear the flag on
+		 * flash and exit.
+		 */
+		memcpy(&vtbl_rec, &ubi->vtbl[vol_id],
+		       sizeof(struct ubi_vtbl_record));
+		err = ubi_change_vtbl_record(ubi, vol_id, &vtbl_rec);
+		if (err)
+			ubi_err("cannot clean auto-resize flag for volume %d",
+				vol_id);
+	} else {
+		desc.vol = vol;
+		err = ubi_resize_volume(&desc,
+					old_reserved_pebs + ubi->avail_pebs);
+		if (err)
+			ubi_err("cannot auto-resize volume %d", vol_id);
+	}
+
+	if (err)
+		return err;
+
+	ubi_msg("volume %d (\"%s\") re-sized from %d to %d LEBs", vol_id,
+		vol->name, old_reserved_pebs, vol->reserved_pebs);
+	return 0;
+}
+
+/**
+ * ubi_attach_mtd_dev - attach an MTD device.
+ * @mtd_dev: MTD device description object
+ * @ubi_num: number to assign to the new UBI device
+ * @vid_hdr_offset: VID header offset
+ *
+ * This function attaches MTD device @mtd_dev to UBI and assign @ubi_num number
+ * to the newly created UBI device, unless @ubi_num is %UBI_DEV_NUM_AUTO, in
+ * which case this function finds a vacant device nubert and assings it
+ * automatically. Returns the new UBI device number in case of success and a
+ * negative error code in case of failure.
+ *
+ * Note, the invocations of this function has to be serialized by the
+ * @ubi_devices_mutex.
+ */
+int ubi_attach_mtd_dev(struct mtd_info *mtd, int ubi_num, int vid_hdr_offset)
+{
+	struct ubi_device *ubi;
+	int i, err;
+
+	/*
+	 * Check if we already have the same MTD device attached.
+	 *
+	 * Note, this function assumes that UBI devices creations and deletions
+	 * are serialized, so it does not take the &ubi_devices_lock.
+	 */
+	for (i = 0; i < UBI_MAX_DEVICES; i++) {
+		ubi = ubi_devices[i];
+		if (ubi && mtd->index == ubi->mtd->index) {
+			dbg_err("mtd%d is already attached to ubi%d",
+				mtd->index, i);
+			return -EEXIST;
+		}
+	}
+
+	/*
+	 * Make sure this MTD device is not emulated on top of an UBI volume
+	 * already. Well, generally this recursion works fine, but there are
+	 * different problems like the UBI module takes a reference to itself
+	 * by attaching (and thus, opening) the emulated MTD device. This
+	 * results in inability to unload the module. And in general it makes
+	 * no sense to attach emulated MTD devices, so we prohibit this.
+	 */
+	if (mtd->type == MTD_UBIVOLUME) {
+		ubi_err("refuse attaching mtd%d - it is already emulated on "
+			"top of UBI", mtd->index);
+		return -EINVAL;
+	}
+
+	if (ubi_num == UBI_DEV_NUM_AUTO) {
+		/* Search for an empty slot in the @ubi_devices array */
+		for (ubi_num = 0; ubi_num < UBI_MAX_DEVICES; ubi_num++)
+			if (!ubi_devices[ubi_num])
+				break;
+		if (ubi_num == UBI_MAX_DEVICES) {
+			dbg_err("only %d UBI devices may be created", UBI_MAX_DEVICES);
+			return -ENFILE;
+		}
+	} else {
+		if (ubi_num >= UBI_MAX_DEVICES)
+			return -EINVAL;
+
+		/* Make sure ubi_num is not busy */
+		if (ubi_devices[ubi_num]) {
+			dbg_err("ubi%d already exists", ubi_num);
+			return -EEXIST;
+		}
+	}
+
+	ubi = kzalloc(sizeof(struct ubi_device), GFP_KERNEL);
+	if (!ubi)
+		return -ENOMEM;
+
+	ubi->mtd = mtd;
+	ubi->ubi_num = ubi_num;
+	ubi->vid_hdr_offset = vid_hdr_offset;
+	ubi->autoresize_vol_id = -1;
+
+	mutex_init(&ubi->buf_mutex);
+	mutex_init(&ubi->ckvol_mutex);
+	mutex_init(&ubi->volumes_mutex);
+	spin_lock_init(&ubi->volumes_lock);
+
+	ubi_msg("attaching mtd%d to ubi%d", mtd->index, ubi_num);
+
+	err = io_init(ubi);
+	if (err)
+		goto out_free;
+
+	err = -ENOMEM;
+	ubi->peb_buf1 = vmalloc(ubi->peb_size);
+	if (!ubi->peb_buf1)
+		goto out_free;
+
+	ubi->peb_buf2 = vmalloc(ubi->peb_size);
+	if (!ubi->peb_buf2)
+		goto out_free;
+
+#ifdef CONFIG_MTD_UBI_DEBUG
+	mutex_init(&ubi->dbg_buf_mutex);
+	ubi->dbg_peb_buf = vmalloc(ubi->peb_size);
+	if (!ubi->dbg_peb_buf)
+		goto out_free;
+#endif
+
+	err = attach_by_scanning(ubi);
+	if (err) {
+		dbg_err("failed to attach by scanning, error %d", err);
+		goto out_free;
+	}
+
+	if (ubi->autoresize_vol_id != -1) {
+		err = autoresize(ubi, ubi->autoresize_vol_id);
+		if (err)
+			goto out_detach;
+	}
+
+	err = uif_init(ubi);
+	if (err)
+		goto out_detach;
+
+	ubi->bgt_thread = kthread_create(ubi_thread, ubi, ubi->bgt_name);
+	if (IS_ERR(ubi->bgt_thread)) {
+		err = PTR_ERR(ubi->bgt_thread);
+		ubi_err("cannot spawn \"%s\", error %d", ubi->bgt_name,
+			err);
+		goto out_uif;
+	}
+
+	ubi_msg("attached mtd%d to ubi%d", mtd->index, ubi_num);
+	ubi_msg("MTD device name:            \"%s\"", mtd->name);
+	ubi_msg("MTD device size:            %llu MiB", ubi->flash_size >> 20);
+	ubi_msg("number of good PEBs:        %d", ubi->good_peb_count);
+	ubi_msg("number of bad PEBs:         %d", ubi->bad_peb_count);
+	ubi_msg("max. allowed volumes:       %d", ubi->vtbl_slots);
+	ubi_msg("wear-leveling threshold:    %d", CONFIG_MTD_UBI_WL_THRESHOLD);
+	ubi_msg("number of internal volumes: %d", UBI_INT_VOL_COUNT);
+	ubi_msg("number of user volumes:     %d",
+		ubi->vol_count - UBI_INT_VOL_COUNT);
+	ubi_msg("available PEBs:             %d", ubi->avail_pebs);
+	ubi_msg("total number of reserved PEBs: %d", ubi->rsvd_pebs);
+	ubi_msg("number of PEBs reserved for bad PEB handling: %d",
+		ubi->beb_rsvd_pebs);
+	ubi_msg("max/mean erase counter: %d/%d", ubi->max_ec, ubi->mean_ec);
+
+	/* Enable the background thread */
+	if (!DBG_DISABLE_BGT) {
+		ubi->thread_enabled = 1;
+		wake_up_process(ubi->bgt_thread);
+	}
+
+	ubi_devices[ubi_num] = ubi;
+	return ubi_num;
+
+out_uif:
+	uif_close(ubi);
+out_detach:
+	ubi_eba_close(ubi);
+	ubi_wl_close(ubi);
+	vfree(ubi->vtbl);
+out_free:
+	vfree(ubi->peb_buf1);
+	vfree(ubi->peb_buf2);
+#ifdef CONFIG_MTD_UBI_DEBUG
+	vfree(ubi->dbg_peb_buf);
+#endif
+	kfree(ubi);
+	return err;
+}
+
+/**
+ * ubi_detach_mtd_dev - detach an MTD device.
+ * @ubi_num: UBI device number to detach from
+ * @anyway: detach MTD even if device reference count is not zero
+ *
+ * This function destroys an UBI device number @ubi_num and detaches the
+ * underlying MTD device. Returns zero in case of success and %-EBUSY if the
+ * UBI device is busy and cannot be destroyed, and %-EINVAL if it does not
+ * exist.
+ *
+ * Note, the invocations of this function has to be serialized by the
+ * @ubi_devices_mutex.
+ */
+int ubi_detach_mtd_dev(int ubi_num, int anyway)
+{
+	struct ubi_device *ubi;
+
+	if (ubi_num < 0 || ubi_num >= UBI_MAX_DEVICES)
+		return -EINVAL;
+
+	spin_lock(&ubi_devices_lock);
+	ubi = ubi_devices[ubi_num];
+	if (!ubi) {
+		spin_unlock(&ubi_devices_lock);
+		return -EINVAL;
+	}
+
+	if (ubi->ref_count) {
+		if (!anyway) {
+			spin_unlock(&ubi_devices_lock);
+			return -EBUSY;
+		}
+		/* This may only happen if there is a bug */
+		ubi_err("%s reference count %d, destroy anyway",
+			ubi->ubi_name, ubi->ref_count);
+	}
+	ubi_devices[ubi_num] = NULL;
+	spin_unlock(&ubi_devices_lock);
+
+	ubi_assert(ubi_num == ubi->ubi_num);
+	dbg_msg("detaching mtd%d from ubi%d", ubi->mtd->index, ubi_num);
+
+	/*
+	 * Before freeing anything, we have to stop the background thread to
+	 * prevent it from doing anything on this device while we are freeing.
+	 */
+	if (ubi->bgt_thread)
+		kthread_stop(ubi->bgt_thread);
+
+	uif_close(ubi);
+	ubi_eba_close(ubi);
+	ubi_wl_close(ubi);
+	vfree(ubi->vtbl);
+	put_mtd_device(ubi->mtd);
+	vfree(ubi->peb_buf1);
+	vfree(ubi->peb_buf2);
+#ifdef CONFIG_MTD_UBI_DEBUG
+	vfree(ubi->dbg_peb_buf);
+#endif
+	ubi_msg("mtd%d is detached from ubi%d", ubi->mtd->index, ubi->ubi_num);
+	kfree(ubi);
+	return 0;
+}
+
+/**
+ * find_mtd_device - open an MTD device by its name or number.
+ * @mtd_dev: name or number of the device
+ *
+ * This function tries to open and MTD device described by @mtd_dev string,
+ * which is first treated as an ASCII number, and if it is not true, it is
+ * treated as MTD device name. Returns MTD device description object in case of
+ * success and a negative error code in case of failure.
+ */
+static struct mtd_info * __init open_mtd_device(const char *mtd_dev)
+{
+	struct mtd_info *mtd;
+	int mtd_num;
+	char *endp;
+
+	mtd_num = simple_strtoul(mtd_dev, &endp, 0);
+	if (*endp != '\0' || mtd_dev == endp) {
+		/*
+		 * This does not look like an ASCII integer, probably this is
+		 * MTD device name.
+		 */
+		mtd = get_mtd_device_nm(mtd_dev);
+	} else
+		mtd = get_mtd_device(NULL, mtd_num);
+
+	return mtd;
+}
+
+int __init ubi_init(void)
+{
+	int err, i, k;
+
+	/* Ensure that EC and VID headers have correct size */
+	BUILD_BUG_ON(sizeof(struct ubi_ec_hdr) != 64);
+	BUILD_BUG_ON(sizeof(struct ubi_vid_hdr) != 64);
+
+	if (mtd_devs > UBI_MAX_DEVICES) {
+		ubi_err("too many MTD devices, maximum is %d", UBI_MAX_DEVICES);
+		return -EINVAL;
+	}
+
+	/* Create base sysfs directory and sysfs files */
+	ubi_class = class_create(THIS_MODULE, UBI_NAME_STR);
+	if (IS_ERR(ubi_class)) {
+		err = PTR_ERR(ubi_class);
+		ubi_err("cannot create UBI class");
+		goto out;
+	}
+
+	err = class_create_file(ubi_class, &ubi_version);
+	if (err) {
+		ubi_err("cannot create sysfs file");
+		goto out_class;
+	}
+
+	err = misc_register(&ubi_ctrl_cdev);
+	if (err) {
+		ubi_err("cannot register device");
+		goto out_version;
+	}
+
+#ifdef UBI_LINUX
+	ubi_wl_entry_slab = kmem_cache_create("ubi_wl_entry_slab",
+					      sizeof(struct ubi_wl_entry),
+					      0, 0, NULL);
+	if (!ubi_wl_entry_slab)
+		goto out_dev_unreg;
+#endif
+
+	/* Attach MTD devices */
+	for (i = 0; i < mtd_devs; i++) {
+		struct mtd_dev_param *p = &mtd_dev_param[i];
+		struct mtd_info *mtd;
+
+		cond_resched();
+
+		mtd = open_mtd_device(p->name);
+		if (IS_ERR(mtd)) {
+			err = PTR_ERR(mtd);
+			goto out_detach;
+		}
+
+		mutex_lock(&ubi_devices_mutex);
+		err = ubi_attach_mtd_dev(mtd, UBI_DEV_NUM_AUTO,
+					 p->vid_hdr_offs);
+		mutex_unlock(&ubi_devices_mutex);
+		if (err < 0) {
+			put_mtd_device(mtd);
+			ubi_err("cannot attach mtd%d", mtd->index);
+			goto out_detach;
+		}
+	}
+
+	return 0;
+
+out_detach:
+	for (k = 0; k < i; k++)
+		if (ubi_devices[k]) {
+			mutex_lock(&ubi_devices_mutex);
+			ubi_detach_mtd_dev(ubi_devices[k]->ubi_num, 1);
+			mutex_unlock(&ubi_devices_mutex);
+		}
+#ifdef UBI_LINUX
+	kmem_cache_destroy(ubi_wl_entry_slab);
+out_dev_unreg:
+#endif
+	misc_deregister(&ubi_ctrl_cdev);
+out_version:
+	class_remove_file(ubi_class, &ubi_version);
+out_class:
+	class_destroy(ubi_class);
+out:
+	ubi_err("UBI error: cannot initialize UBI, error %d", err);
+	return err;
+}
+module_init(ubi_init);
+
+void __exit ubi_exit(void)
+{
+	int i;
+
+	for (i = 0; i < UBI_MAX_DEVICES; i++)
+		if (ubi_devices[i]) {
+			mutex_lock(&ubi_devices_mutex);
+			ubi_detach_mtd_dev(ubi_devices[i]->ubi_num, 1);
+			mutex_unlock(&ubi_devices_mutex);
+		}
+	kmem_cache_destroy(ubi_wl_entry_slab);
+	misc_deregister(&ubi_ctrl_cdev);
+	class_remove_file(ubi_class, &ubi_version);
+	class_destroy(ubi_class);
+	mtd_devs = 0;
+}
+module_exit(ubi_exit);
+
+/**
+ * bytes_str_to_int - convert a string representing number of bytes to an
+ * integer.
+ * @str: the string to convert
+ *
+ * This function returns positive resulting integer in case of success and a
+ * negative error code in case of failure.
+ */
+static int __init bytes_str_to_int(const char *str)
+{
+	char *endp;
+	unsigned long result;
+
+	result = simple_strtoul(str, &endp, 0);
+	if (str == endp || result < 0) {
+		printk(KERN_ERR "UBI error: incorrect bytes count: \"%s\"\n",
+		       str);
+		return -EINVAL;
+	}
+
+	switch (*endp) {
+	case 'G':
+		result *= 1024;
+	case 'M':
+		result *= 1024;
+	case 'K':
+		result *= 1024;
+		if (endp[1] == 'i' && endp[2] == 'B')
+			endp += 2;
+	case '\0':
+		break;
+	default:
+		printk(KERN_ERR "UBI error: incorrect bytes count: \"%s\"\n",
+		       str);
+		return -EINVAL;
+	}
+
+	return result;
+}
+
+/**
+ * ubi_mtd_param_parse - parse the 'mtd=' UBI parameter.
+ * @val: the parameter value to parse
+ * @kp: not used
+ *
+ * This function returns zero in case of success and a negative error code in
+ * case of error.
+ */
+int __init ubi_mtd_param_parse(const char *val, struct kernel_param *kp)
+{
+	int i, len;
+	struct mtd_dev_param *p;
+	char buf[MTD_PARAM_LEN_MAX];
+	char *pbuf = &buf[0];
+	char *tokens[2] = {NULL, NULL};
+
+	if (!val)
+		return -EINVAL;
+
+	if (mtd_devs == UBI_MAX_DEVICES) {
+		printk(KERN_ERR "UBI error: too many parameters, max. is %d\n",
+		       UBI_MAX_DEVICES);
+		return -EINVAL;
+	}
+
+	len = strnlen(val, MTD_PARAM_LEN_MAX);
+	if (len == MTD_PARAM_LEN_MAX) {
+		printk(KERN_ERR "UBI error: parameter \"%s\" is too long, "
+		       "max. is %d\n", val, MTD_PARAM_LEN_MAX);
+		return -EINVAL;
+	}
+
+	if (len == 0) {
+		printk(KERN_WARNING "UBI warning: empty 'mtd=' parameter - "
+		       "ignored\n");
+		return 0;
+	}
+
+	strcpy(buf, val);
+
+	/* Get rid of the final newline */
+	if (buf[len - 1] == '\n')
+		buf[len - 1] = '\0';
+
+	for (i = 0; i < 2; i++)
+		tokens[i] = strsep(&pbuf, ",");
+
+	if (pbuf) {
+		printk(KERN_ERR "UBI error: too many arguments at \"%s\"\n",
+		       val);
+		return -EINVAL;
+	}
+
+	p = &mtd_dev_param[mtd_devs];
+	strcpy(&p->name[0], tokens[0]);
+
+	if (tokens[1])
+		p->vid_hdr_offs = bytes_str_to_int(tokens[1]);
+
+	if (p->vid_hdr_offs < 0)
+		return p->vid_hdr_offs;
+
+	mtd_devs += 1;
+	return 0;
+}
+
+module_param_call(mtd, ubi_mtd_param_parse, NULL, NULL, 000);
+MODULE_PARM_DESC(mtd, "MTD devices to attach. Parameter format: "
+		      "mtd=<name|num>[,<vid_hdr_offs>].\n"
+		      "Multiple \"mtd\" parameters may be specified.\n"
+		      "MTD devices may be specified by their number or name.\n"
+		      "Optional \"vid_hdr_offs\" parameter specifies UBI VID "
+		      "header position and data starting position to be used "
+		      "by UBI.\n"
+		      "Example: mtd=content,1984 mtd=4 - attach MTD device"
+		      "with name \"content\" using VID header offset 1984, and "
+		      "MTD device number 4 with default VID header offset.");
+
+MODULE_VERSION(__stringify(UBI_VERSION));
+MODULE_DESCRIPTION("UBI - Unsorted Block Images");
+MODULE_AUTHOR("Artem Bityutskiy");
+MODULE_LICENSE("GPL");
diff --git a/drivers/mtd/ubi/crc32.c b/drivers/mtd/ubi/crc32.c
new file mode 100644
index 000000000..a7e26b045
--- /dev/null
+++ b/drivers/mtd/ubi/crc32.c
@@ -0,0 +1,518 @@
+/*
+ * Oct 15, 2000 Matt Domsch <Matt_Domsch@dell.com>
+ * Nicer crc32 functions/docs submitted by linux@horizon.com.  Thanks!
+ * Code was from the public domain, copyright abandoned.  Code was
+ * subsequently included in the kernel, thus was re-licensed under the
+ * GNU GPL v2.
+ *
+ * Oct 12, 2000 Matt Domsch <Matt_Domsch@dell.com>
+ * Same crc32 function was used in 5 other places in the kernel.
+ * I made one version, and deleted the others.
+ * There are various incantations of crc32().  Some use a seed of 0 or ~0.
+ * Some xor at the end with ~0.  The generic crc32() function takes
+ * seed as an argument, and doesn't xor at the end.  Then individual
+ * users can do whatever they need.
+ *   drivers/net/smc9194.c uses seed ~0, doesn't xor with ~0.
+ *   fs/jffs2 uses seed 0, doesn't xor with ~0.
+ *   fs/partitions/efi.c uses seed ~0, xor's with ~0.
+ *
+ * This source code is licensed under the GNU General Public License,
+ * Version 2.  See the file COPYING for more details.
+ */
+
+#ifdef UBI_LINUX
+#include <linux/crc32.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/compiler.h>
+#endif
+#include <linux/types.h>
+
+#include <asm/byteorder.h>
+
+#ifdef UBI_LINUX
+#include <linux/slab.h>
+#include <linux/init.h>
+#include <asm/atomic.h>
+#endif
+#include "crc32defs.h"
+#define CRC_LE_BITS 8
+
+# define __force
+#ifndef __constant_cpu_to_le32
+#define __constant_cpu_to_le32(x) ((__force __le32)(__u32)(x))
+#endif
+#ifndef __constant_le32_to_cpu
+#define __constant_le32_to_cpu(x) ((__force __u32)(__le32)(x))
+#endif
+
+#if CRC_LE_BITS == 8
+#define tole(x) __constant_cpu_to_le32(x)
+#define tobe(x) __constant_cpu_to_be32(x)
+#else
+#define tole(x) (x)
+#define tobe(x) (x)
+#endif
+#include "crc32table.h"
+#ifdef UBI_LINUX
+MODULE_AUTHOR("Matt Domsch <Matt_Domsch@dell.com>");
+MODULE_DESCRIPTION("Ethernet CRC32 calculations");
+MODULE_LICENSE("GPL");
+#endif
+/**
+ * crc32_le() - Calculate bitwise little-endian Ethernet AUTODIN II CRC32
+ * @crc: seed value for computation.  ~0 for Ethernet, sometimes 0 for
+ *	other uses, or the previous crc32 value if computing incrementally.
+ * @p: pointer to buffer over which CRC is run
+ * @len: length of buffer @p
+ */
+u32  crc32_le(u32 crc, unsigned char const *p, size_t len);
+
+#if CRC_LE_BITS == 1
+/*
+ * In fact, the table-based code will work in this case, but it can be
+ * simplified by inlining the table in ?: form.
+ */
+
+u32 crc32_le(u32 crc, unsigned char const *p, size_t len)
+{
+	int i;
+	while (len--) {
+		crc ^= *p++;
+		for (i = 0; i < 8; i++)
+			crc = (crc >> 1) ^ ((crc & 1) ? CRCPOLY_LE : 0);
+	}
+	return crc;
+}
+#else				/* Table-based approach */
+
+u32 crc32_le(u32 crc, unsigned char const *p, size_t len)
+{
+# if CRC_LE_BITS == 8
+	const u32      *b =(u32 *)p;
+	const u32      *tab = crc32table_le;
+
+# ifdef __LITTLE_ENDIAN
+#  define DO_CRC(x) crc = tab[ (crc ^ (x)) & 255 ] ^ (crc>>8)
+# else
+#  define DO_CRC(x) crc = tab[ ((crc >> 24) ^ (x)) & 255] ^ (crc<<8)
+# endif
+	/* printf("Crc32_le crc=%x\n",crc); */
+	crc = __cpu_to_le32(crc);
+	/* Align it */
+	if((((long)b)&3 && len)){
+		do {
+			u8 *p = (u8 *)b;
+			DO_CRC(*p++);
+			b = (void *)p;
+		} while ((--len) && ((long)b)&3 );
+	}
+	if((len >= 4)){
+		/* load data 32 bits wide, xor data 32 bits wide. */
+		size_t save_len = len & 3;
+	        len = len >> 2;
+		--b; /* use pre increment below(*++b) for speed */
+		do {
+			crc ^= *++b;
+			DO_CRC(0);
+			DO_CRC(0);
+			DO_CRC(0);
+			DO_CRC(0);
+		} while (--len);
+		b++; /* point to next byte(s) */
+		len = save_len;
+	}
+	/* And the last few bytes */
+	if(len){
+		do {
+			u8 *p = (u8 *)b;
+			DO_CRC(*p++);
+			b = (void *)p;
+		} while (--len);
+	}
+
+	return __le32_to_cpu(crc);
+#undef ENDIAN_SHIFT
+#undef DO_CRC
+
+# elif CRC_LE_BITS == 4
+	while (len--) {
+		crc ^= *p++;
+		crc = (crc >> 4) ^ crc32table_le[crc & 15];
+		crc = (crc >> 4) ^ crc32table_le[crc & 15];
+	}
+	return crc;
+# elif CRC_LE_BITS == 2
+	while (len--) {
+		crc ^= *p++;
+		crc = (crc >> 2) ^ crc32table_le[crc & 3];
+		crc = (crc >> 2) ^ crc32table_le[crc & 3];
+		crc = (crc >> 2) ^ crc32table_le[crc & 3];
+		crc = (crc >> 2) ^ crc32table_le[crc & 3];
+	}
+	return crc;
+# endif
+}
+#endif
+#ifdef UBI_LINUX
+/**
+ * crc32_be() - Calculate bitwise big-endian Ethernet AUTODIN II CRC32
+ * @crc: seed value for computation.  ~0 for Ethernet, sometimes 0 for
+ *	other uses, or the previous crc32 value if computing incrementally.
+ * @p: pointer to buffer over which CRC is run
+ * @len: length of buffer @p
+ */
+u32 __attribute_pure__ crc32_be(u32 crc, unsigned char const *p, size_t len);
+
+#if CRC_BE_BITS == 1
+/*
+ * In fact, the table-based code will work in this case, but it can be
+ * simplified by inlining the table in ?: form.
+ */
+
+u32 __attribute_pure__ crc32_be(u32 crc, unsigned char const *p, size_t len)
+{
+	int i;
+	while (len--) {
+		crc ^= *p++ << 24;
+		for (i = 0; i < 8; i++)
+			crc =
+			    (crc << 1) ^ ((crc & 0x80000000) ? CRCPOLY_BE :
+					  0);
+	}
+	return crc;
+}
+
+#else				/* Table-based approach */
+u32 __attribute_pure__ crc32_be(u32 crc, unsigned char const *p, size_t len)
+{
+# if CRC_BE_BITS == 8
+	const u32      *b =(u32 *)p;
+	const u32      *tab = crc32table_be;
+
+# ifdef __LITTLE_ENDIAN
+#  define DO_CRC(x) crc = tab[ (crc ^ (x)) & 255 ] ^ (crc>>8)
+# else
+#  define DO_CRC(x) crc = tab[ ((crc >> 24) ^ (x)) & 255] ^ (crc<<8)
+# endif
+
+	crc = __cpu_to_be32(crc);
+	/* Align it */
+	if(unlikely(((long)b)&3 && len)){
+		do {
+			u8 *p = (u8 *)b;
+			DO_CRC(*p++);
+			b = (u32 *)p;
+		} while ((--len) && ((long)b)&3 );
+	}
+	if(likely(len >= 4)){
+		/* load data 32 bits wide, xor data 32 bits wide. */
+		size_t save_len = len & 3;
+	        len = len >> 2;
+		--b; /* use pre increment below(*++b) for speed */
+		do {
+			crc ^= *++b;
+			DO_CRC(0);
+			DO_CRC(0);
+			DO_CRC(0);
+			DO_CRC(0);
+		} while (--len);
+		b++; /* point to next byte(s) */
+		len = save_len;
+	}
+	/* And the last few bytes */
+	if(len){
+		do {
+			u8 *p = (u8 *)b;
+			DO_CRC(*p++);
+			b = (void *)p;
+		} while (--len);
+	}
+	return __be32_to_cpu(crc);
+#undef ENDIAN_SHIFT
+#undef DO_CRC
+
+# elif CRC_BE_BITS == 4
+	while (len--) {
+		crc ^= *p++ << 24;
+		crc = (crc << 4) ^ crc32table_be[crc >> 28];
+		crc = (crc << 4) ^ crc32table_be[crc >> 28];
+	}
+	return crc;
+# elif CRC_BE_BITS == 2
+	while (len--) {
+		crc ^= *p++ << 24;
+		crc = (crc << 2) ^ crc32table_be[crc >> 30];
+		crc = (crc << 2) ^ crc32table_be[crc >> 30];
+		crc = (crc << 2) ^ crc32table_be[crc >> 30];
+		crc = (crc << 2) ^ crc32table_be[crc >> 30];
+	}
+	return crc;
+# endif
+}
+#endif
+
+EXPORT_SYMBOL(crc32_le);
+EXPORT_SYMBOL(crc32_be);
+#endif
+/*
+ * A brief CRC tutorial.
+ *
+ * A CRC is a long-division remainder.  You add the CRC to the message,
+ * and the whole thing (message+CRC) is a multiple of the given
+ * CRC polynomial.  To check the CRC, you can either check that the
+ * CRC matches the recomputed value, *or* you can check that the
+ * remainder computed on the message+CRC is 0.  This latter approach
+ * is used by a lot of hardware implementations, and is why so many
+ * protocols put the end-of-frame flag after the CRC.
+ *
+ * It's actually the same long division you learned in school, except that
+ * - We're working in binary, so the digits are only 0 and 1, and
+ * - When dividing polynomials, there are no carries.  Rather than add and
+ *   subtract, we just xor.  Thus, we tend to get a bit sloppy about
+ *   the difference between adding and subtracting.
+ *
+ * A 32-bit CRC polynomial is actually 33 bits long.  But since it's
+ * 33 bits long, bit 32 is always going to be set, so usually the CRC
+ * is written in hex with the most significant bit omitted.  (If you're
+ * familiar with the IEEE 754 floating-point format, it's the same idea.)
+ *
+ * Note that a CRC is computed over a string of *bits*, so you have
+ * to decide on the endianness of the bits within each byte.  To get
+ * the best error-detecting properties, this should correspond to the
+ * order they're actually sent.  For example, standard RS-232 serial is
+ * little-endian; the most significant bit (sometimes used for parity)
+ * is sent last.  And when appending a CRC word to a message, you should
+ * do it in the right order, matching the endianness.
+ *
+ * Just like with ordinary division, the remainder is always smaller than
+ * the divisor (the CRC polynomial) you're dividing by.  Each step of the
+ * division, you take one more digit (bit) of the dividend and append it
+ * to the current remainder.  Then you figure out the appropriate multiple
+ * of the divisor to subtract to being the remainder back into range.
+ * In binary, it's easy - it has to be either 0 or 1, and to make the
+ * XOR cancel, it's just a copy of bit 32 of the remainder.
+ *
+ * When computing a CRC, we don't care about the quotient, so we can
+ * throw the quotient bit away, but subtract the appropriate multiple of
+ * the polynomial from the remainder and we're back to where we started,
+ * ready to process the next bit.
+ *
+ * A big-endian CRC written this way would be coded like:
+ * for (i = 0; i < input_bits; i++) {
+ * 	multiple = remainder & 0x80000000 ? CRCPOLY : 0;
+ * 	remainder = (remainder << 1 | next_input_bit()) ^ multiple;
+ * }
+ * Notice how, to get at bit 32 of the shifted remainder, we look
+ * at bit 31 of the remainder *before* shifting it.
+ *
+ * But also notice how the next_input_bit() bits we're shifting into
+ * the remainder don't actually affect any decision-making until
+ * 32 bits later.  Thus, the first 32 cycles of this are pretty boring.
+ * Also, to add the CRC to a message, we need a 32-bit-long hole for it at
+ * the end, so we have to add 32 extra cycles shifting in zeros at the
+ * end of every message,
+ *
+ * So the standard trick is to rearrage merging in the next_input_bit()
+ * until the moment it's needed.  Then the first 32 cycles can be precomputed,
+ * and merging in the final 32 zero bits to make room for the CRC can be
+ * skipped entirely.
+ * This changes the code to:
+ * for (i = 0; i < input_bits; i++) {
+ *      remainder ^= next_input_bit() << 31;
+ * 	multiple = (remainder & 0x80000000) ? CRCPOLY : 0;
+ * 	remainder = (remainder << 1) ^ multiple;
+ * }
+ * With this optimization, the little-endian code is simpler:
+ * for (i = 0; i < input_bits; i++) {
+ *      remainder ^= next_input_bit();
+ * 	multiple = (remainder & 1) ? CRCPOLY : 0;
+ * 	remainder = (remainder >> 1) ^ multiple;
+ * }
+ *
+ * Note that the other details of endianness have been hidden in CRCPOLY
+ * (which must be bit-reversed) and next_input_bit().
+ *
+ * However, as long as next_input_bit is returning the bits in a sensible
+ * order, we can actually do the merging 8 or more bits at a time rather
+ * than one bit at a time:
+ * for (i = 0; i < input_bytes; i++) {
+ * 	remainder ^= next_input_byte() << 24;
+ * 	for (j = 0; j < 8; j++) {
+ * 		multiple = (remainder & 0x80000000) ? CRCPOLY : 0;
+ * 		remainder = (remainder << 1) ^ multiple;
+ * 	}
+ * }
+ * Or in little-endian:
+ * for (i = 0; i < input_bytes; i++) {
+ * 	remainder ^= next_input_byte();
+ * 	for (j = 0; j < 8; j++) {
+ * 		multiple = (remainder & 1) ? CRCPOLY : 0;
+ * 		remainder = (remainder << 1) ^ multiple;
+ * 	}
+ * }
+ * If the input is a multiple of 32 bits, you can even XOR in a 32-bit
+ * word at a time and increase the inner loop count to 32.
+ *
+ * You can also mix and match the two loop styles, for example doing the
+ * bulk of a message byte-at-a-time and adding bit-at-a-time processing
+ * for any fractional bytes at the end.
+ *
+ * The only remaining optimization is to the byte-at-a-time table method.
+ * Here, rather than just shifting one bit of the remainder to decide
+ * in the correct multiple to subtract, we can shift a byte at a time.
+ * This produces a 40-bit (rather than a 33-bit) intermediate remainder,
+ * but again the multiple of the polynomial to subtract depends only on
+ * the high bits, the high 8 bits in this case.
+ *
+ * The multile we need in that case is the low 32 bits of a 40-bit
+ * value whose high 8 bits are given, and which is a multiple of the
+ * generator polynomial.  This is simply the CRC-32 of the given
+ * one-byte message.
+ *
+ * Two more details: normally, appending zero bits to a message which
+ * is already a multiple of a polynomial produces a larger multiple of that
+ * polynomial.  To enable a CRC to detect this condition, it's common to
+ * invert the CRC before appending it.  This makes the remainder of the
+ * message+crc come out not as zero, but some fixed non-zero value.
+ *
+ * The same problem applies to zero bits prepended to the message, and
+ * a similar solution is used.  Instead of starting with a remainder of
+ * 0, an initial remainder of all ones is used.  As long as you start
+ * the same way on decoding, it doesn't make a difference.
+ */
+
+#ifdef UNITTEST
+
+#include <stdlib.h>
+#include <stdio.h>
+
+#ifdef UBI_LINUX				/*Not used at present */
+static void
+buf_dump(char const *prefix, unsigned char const *buf, size_t len)
+{
+	fputs(prefix, stdout);
+	while (len--)
+		printf(" %02x", *buf++);
+	putchar('\n');
+
+}
+#endif
+
+static void bytereverse(unsigned char *buf, size_t len)
+{
+	while (len--) {
+		unsigned char x = bitrev8(*buf);
+		*buf++ = x;
+	}
+}
+
+static void random_garbage(unsigned char *buf, size_t len)
+{
+	while (len--)
+		*buf++ = (unsigned char) random();
+}
+
+#ifdef UBI_LINUX				/* Not used at present */
+static void store_le(u32 x, unsigned char *buf)
+{
+	buf[0] = (unsigned char) x;
+	buf[1] = (unsigned char) (x >> 8);
+	buf[2] = (unsigned char) (x >> 16);
+	buf[3] = (unsigned char) (x >> 24);
+}
+#endif
+
+static void store_be(u32 x, unsigned char *buf)
+{
+	buf[0] = (unsigned char) (x >> 24);
+	buf[1] = (unsigned char) (x >> 16);
+	buf[2] = (unsigned char) (x >> 8);
+	buf[3] = (unsigned char) x;
+}
+
+/*
+ * This checks that CRC(buf + CRC(buf)) = 0, and that
+ * CRC commutes with bit-reversal.  This has the side effect
+ * of bytewise bit-reversing the input buffer, and returns
+ * the CRC of the reversed buffer.
+ */
+static u32 test_step(u32 init, unsigned char *buf, size_t len)
+{
+	u32 crc1, crc2;
+	size_t i;
+
+	crc1 = crc32_be(init, buf, len);
+	store_be(crc1, buf + len);
+	crc2 = crc32_be(init, buf, len + 4);
+	if (crc2)
+		printf("\nCRC cancellation fail: 0x%08x should be 0\n",
+		       crc2);
+
+	for (i = 0; i <= len + 4; i++) {
+		crc2 = crc32_be(init, buf, i);
+		crc2 = crc32_be(crc2, buf + i, len + 4 - i);
+		if (crc2)
+			printf("\nCRC split fail: 0x%08x\n", crc2);
+	}
+
+	/* Now swap it around for the other test */
+
+	bytereverse(buf, len + 4);
+	init = bitrev32(init);
+	crc2 = bitrev32(crc1);
+	if (crc1 != bitrev32(crc2))
+		printf("\nBit reversal fail: 0x%08x -> 0x%08x -> 0x%08x\n",
+		       crc1, crc2, bitrev32(crc2));
+	crc1 = crc32_le(init, buf, len);
+	if (crc1 != crc2)
+		printf("\nCRC endianness fail: 0x%08x != 0x%08x\n", crc1,
+		       crc2);
+	crc2 = crc32_le(init, buf, len + 4);
+	if (crc2)
+		printf("\nCRC cancellation fail: 0x%08x should be 0\n",
+		       crc2);
+
+	for (i = 0; i <= len + 4; i++) {
+		crc2 = crc32_le(init, buf, i);
+		crc2 = crc32_le(crc2, buf + i, len + 4 - i);
+		if (crc2)
+			printf("\nCRC split fail: 0x%08x\n", crc2);
+	}
+
+	return crc1;
+}
+
+#define SIZE 64
+#define INIT1 0
+#define INIT2 0
+
+int main(void)
+{
+	unsigned char buf1[SIZE + 4];
+	unsigned char buf2[SIZE + 4];
+	unsigned char buf3[SIZE + 4];
+	int i, j;
+	u32 crc1, crc2, crc3;
+
+	for (i = 0; i <= SIZE; i++) {
+		printf("\rTesting length %d...", i);
+		fflush(stdout);
+		random_garbage(buf1, i);
+		random_garbage(buf2, i);
+		for (j = 0; j < i; j++)
+			buf3[j] = buf1[j] ^ buf2[j];
+
+		crc1 = test_step(INIT1, buf1, i);
+		crc2 = test_step(INIT2, buf2, i);
+		/* Now check that CRC(buf1 ^ buf2) = CRC(buf1) ^ CRC(buf2) */
+		crc3 = test_step(INIT1 ^ INIT2, buf3, i);
+		if (crc3 != (crc1 ^ crc2))
+			printf("CRC XOR fail: 0x%08x != 0x%08x ^ 0x%08x\n",
+			       crc3, crc1, crc2);
+	}
+	printf("\nAll test complete.  No failures expected.\n");
+	return 0;
+}
+
+#endif				/* UNITTEST */
diff --git a/drivers/mtd/ubi/crc32defs.h b/drivers/mtd/ubi/crc32defs.h
new file mode 100644
index 000000000..f5a540176
--- /dev/null
+++ b/drivers/mtd/ubi/crc32defs.h
@@ -0,0 +1,32 @@
+/*
+ * There are multiple 16-bit CRC polynomials in common use, but this is
+ * *the* standard CRC-32 polynomial, first popularized by Ethernet.
+ * x^32+x^26+x^23+x^22+x^16+x^12+x^11+x^10+x^8+x^7+x^5+x^4+x^2+x^1+x^0
+ */
+#define CRCPOLY_LE 0xedb88320
+#define CRCPOLY_BE 0x04c11db7
+
+/* How many bits at a time to use.  Requires a table of 4<<CRC_xx_BITS bytes. */
+/* For less performance-sensitive, use 4 */
+#ifndef CRC_LE_BITS
+# define CRC_LE_BITS 8
+#endif
+#ifndef CRC_BE_BITS
+# define CRC_BE_BITS 8
+#endif
+
+/*
+ * Little-endian CRC computation.  Used with serial bit streams sent
+ * lsbit-first.  Be sure to use cpu_to_le32() to append the computed CRC.
+ */
+#if CRC_LE_BITS > 8 || CRC_LE_BITS < 1 || CRC_LE_BITS & CRC_LE_BITS-1
+# error CRC_LE_BITS must be a power of 2 between 1 and 8
+#endif
+
+/*
+ * Big-endian CRC computation.  Used with serial bit streams sent
+ * msbit-first.  Be sure to use cpu_to_be32() to append the computed CRC.
+ */
+#if CRC_BE_BITS > 8 || CRC_BE_BITS < 1 || CRC_BE_BITS & CRC_BE_BITS-1
+# error CRC_BE_BITS must be a power of 2 between 1 and 8
+#endif
diff --git a/drivers/mtd/ubi/crc32table.h b/drivers/mtd/ubi/crc32table.h
new file mode 100644
index 000000000..0438af435
--- /dev/null
+++ b/drivers/mtd/ubi/crc32table.h
@@ -0,0 +1,136 @@
+/* this file is generated - do not edit */
+
+static const u32 crc32table_le[] = {
+tole(0x00000000L), tole(0x77073096L), tole(0xee0e612cL), tole(0x990951baL),
+tole(0x076dc419L), tole(0x706af48fL), tole(0xe963a535L), tole(0x9e6495a3L),
+tole(0x0edb8832L), tole(0x79dcb8a4L), tole(0xe0d5e91eL), tole(0x97d2d988L),
+tole(0x09b64c2bL), tole(0x7eb17cbdL), tole(0xe7b82d07L), tole(0x90bf1d91L),
+tole(0x1db71064L), tole(0x6ab020f2L), tole(0xf3b97148L), tole(0x84be41deL),
+tole(0x1adad47dL), tole(0x6ddde4ebL), tole(0xf4d4b551L), tole(0x83d385c7L),
+tole(0x136c9856L), tole(0x646ba8c0L), tole(0xfd62f97aL), tole(0x8a65c9ecL),
+tole(0x14015c4fL), tole(0x63066cd9L), tole(0xfa0f3d63L), tole(0x8d080df5L),
+tole(0x3b6e20c8L), tole(0x4c69105eL), tole(0xd56041e4L), tole(0xa2677172L),
+tole(0x3c03e4d1L), tole(0x4b04d447L), tole(0xd20d85fdL), tole(0xa50ab56bL),
+tole(0x35b5a8faL), tole(0x42b2986cL), tole(0xdbbbc9d6L), tole(0xacbcf940L),
+tole(0x32d86ce3L), tole(0x45df5c75L), tole(0xdcd60dcfL), tole(0xabd13d59L),
+tole(0x26d930acL), tole(0x51de003aL), tole(0xc8d75180L), tole(0xbfd06116L),
+tole(0x21b4f4b5L), tole(0x56b3c423L), tole(0xcfba9599L), tole(0xb8bda50fL),
+tole(0x2802b89eL), tole(0x5f058808L), tole(0xc60cd9b2L), tole(0xb10be924L),
+tole(0x2f6f7c87L), tole(0x58684c11L), tole(0xc1611dabL), tole(0xb6662d3dL),
+tole(0x76dc4190L), tole(0x01db7106L), tole(0x98d220bcL), tole(0xefd5102aL),
+tole(0x71b18589L), tole(0x06b6b51fL), tole(0x9fbfe4a5L), tole(0xe8b8d433L),
+tole(0x7807c9a2L), tole(0x0f00f934L), tole(0x9609a88eL), tole(0xe10e9818L),
+tole(0x7f6a0dbbL), tole(0x086d3d2dL), tole(0x91646c97L), tole(0xe6635c01L),
+tole(0x6b6b51f4L), tole(0x1c6c6162L), tole(0x856530d8L), tole(0xf262004eL),
+tole(0x6c0695edL), tole(0x1b01a57bL), tole(0x8208f4c1L), tole(0xf50fc457L),
+tole(0x65b0d9c6L), tole(0x12b7e950L), tole(0x8bbeb8eaL), tole(0xfcb9887cL),
+tole(0x62dd1ddfL), tole(0x15da2d49L), tole(0x8cd37cf3L), tole(0xfbd44c65L),
+tole(0x4db26158L), tole(0x3ab551ceL), tole(0xa3bc0074L), tole(0xd4bb30e2L),
+tole(0x4adfa541L), tole(0x3dd895d7L), tole(0xa4d1c46dL), tole(0xd3d6f4fbL),
+tole(0x4369e96aL), tole(0x346ed9fcL), tole(0xad678846L), tole(0xda60b8d0L),
+tole(0x44042d73L), tole(0x33031de5L), tole(0xaa0a4c5fL), tole(0xdd0d7cc9L),
+tole(0x5005713cL), tole(0x270241aaL), tole(0xbe0b1010L), tole(0xc90c2086L),
+tole(0x5768b525L), tole(0x206f85b3L), tole(0xb966d409L), tole(0xce61e49fL),
+tole(0x5edef90eL), tole(0x29d9c998L), tole(0xb0d09822L), tole(0xc7d7a8b4L),
+tole(0x59b33d17L), tole(0x2eb40d81L), tole(0xb7bd5c3bL), tole(0xc0ba6cadL),
+tole(0xedb88320L), tole(0x9abfb3b6L), tole(0x03b6e20cL), tole(0x74b1d29aL),
+tole(0xead54739L), tole(0x9dd277afL), tole(0x04db2615L), tole(0x73dc1683L),
+tole(0xe3630b12L), tole(0x94643b84L), tole(0x0d6d6a3eL), tole(0x7a6a5aa8L),
+tole(0xe40ecf0bL), tole(0x9309ff9dL), tole(0x0a00ae27L), tole(0x7d079eb1L),
+tole(0xf00f9344L), tole(0x8708a3d2L), tole(0x1e01f268L), tole(0x6906c2feL),
+tole(0xf762575dL), tole(0x806567cbL), tole(0x196c3671L), tole(0x6e6b06e7L),
+tole(0xfed41b76L), tole(0x89d32be0L), tole(0x10da7a5aL), tole(0x67dd4accL),
+tole(0xf9b9df6fL), tole(0x8ebeeff9L), tole(0x17b7be43L), tole(0x60b08ed5L),
+tole(0xd6d6a3e8L), tole(0xa1d1937eL), tole(0x38d8c2c4L), tole(0x4fdff252L),
+tole(0xd1bb67f1L), tole(0xa6bc5767L), tole(0x3fb506ddL), tole(0x48b2364bL),
+tole(0xd80d2bdaL), tole(0xaf0a1b4cL), tole(0x36034af6L), tole(0x41047a60L),
+tole(0xdf60efc3L), tole(0xa867df55L), tole(0x316e8eefL), tole(0x4669be79L),
+tole(0xcb61b38cL), tole(0xbc66831aL), tole(0x256fd2a0L), tole(0x5268e236L),
+tole(0xcc0c7795L), tole(0xbb0b4703L), tole(0x220216b9L), tole(0x5505262fL),
+tole(0xc5ba3bbeL), tole(0xb2bd0b28L), tole(0x2bb45a92L), tole(0x5cb36a04L),
+tole(0xc2d7ffa7L), tole(0xb5d0cf31L), tole(0x2cd99e8bL), tole(0x5bdeae1dL),
+tole(0x9b64c2b0L), tole(0xec63f226L), tole(0x756aa39cL), tole(0x026d930aL),
+tole(0x9c0906a9L), tole(0xeb0e363fL), tole(0x72076785L), tole(0x05005713L),
+tole(0x95bf4a82L), tole(0xe2b87a14L), tole(0x7bb12baeL), tole(0x0cb61b38L),
+tole(0x92d28e9bL), tole(0xe5d5be0dL), tole(0x7cdcefb7L), tole(0x0bdbdf21L),
+tole(0x86d3d2d4L), tole(0xf1d4e242L), tole(0x68ddb3f8L), tole(0x1fda836eL),
+tole(0x81be16cdL), tole(0xf6b9265bL), tole(0x6fb077e1L), tole(0x18b74777L),
+tole(0x88085ae6L), tole(0xff0f6a70L), tole(0x66063bcaL), tole(0x11010b5cL),
+tole(0x8f659effL), tole(0xf862ae69L), tole(0x616bffd3L), tole(0x166ccf45L),
+tole(0xa00ae278L), tole(0xd70dd2eeL), tole(0x4e048354L), tole(0x3903b3c2L),
+tole(0xa7672661L), tole(0xd06016f7L), tole(0x4969474dL), tole(0x3e6e77dbL),
+tole(0xaed16a4aL), tole(0xd9d65adcL), tole(0x40df0b66L), tole(0x37d83bf0L),
+tole(0xa9bcae53L), tole(0xdebb9ec5L), tole(0x47b2cf7fL), tole(0x30b5ffe9L),
+tole(0xbdbdf21cL), tole(0xcabac28aL), tole(0x53b39330L), tole(0x24b4a3a6L),
+tole(0xbad03605L), tole(0xcdd70693L), tole(0x54de5729L), tole(0x23d967bfL),
+tole(0xb3667a2eL), tole(0xc4614ab8L), tole(0x5d681b02L), tole(0x2a6f2b94L),
+tole(0xb40bbe37L), tole(0xc30c8ea1L), tole(0x5a05df1bL), tole(0x2d02ef8dL)
+};
+#ifdef UBI_LINUX
+static const u32 crc32table_be[] = {
+tobe(0x00000000L), tobe(0x04c11db7L), tobe(0x09823b6eL), tobe(0x0d4326d9L),
+tobe(0x130476dcL), tobe(0x17c56b6bL), tobe(0x1a864db2L), tobe(0x1e475005L),
+tobe(0x2608edb8L), tobe(0x22c9f00fL), tobe(0x2f8ad6d6L), tobe(0x2b4bcb61L),
+tobe(0x350c9b64L), tobe(0x31cd86d3L), tobe(0x3c8ea00aL), tobe(0x384fbdbdL),
+tobe(0x4c11db70L), tobe(0x48d0c6c7L), tobe(0x4593e01eL), tobe(0x4152fda9L),
+tobe(0x5f15adacL), tobe(0x5bd4b01bL), tobe(0x569796c2L), tobe(0x52568b75L),
+tobe(0x6a1936c8L), tobe(0x6ed82b7fL), tobe(0x639b0da6L), tobe(0x675a1011L),
+tobe(0x791d4014L), tobe(0x7ddc5da3L), tobe(0x709f7b7aL), tobe(0x745e66cdL),
+tobe(0x9823b6e0L), tobe(0x9ce2ab57L), tobe(0x91a18d8eL), tobe(0x95609039L),
+tobe(0x8b27c03cL), tobe(0x8fe6dd8bL), tobe(0x82a5fb52L), tobe(0x8664e6e5L),
+tobe(0xbe2b5b58L), tobe(0xbaea46efL), tobe(0xb7a96036L), tobe(0xb3687d81L),
+tobe(0xad2f2d84L), tobe(0xa9ee3033L), tobe(0xa4ad16eaL), tobe(0xa06c0b5dL),
+tobe(0xd4326d90L), tobe(0xd0f37027L), tobe(0xddb056feL), tobe(0xd9714b49L),
+tobe(0xc7361b4cL), tobe(0xc3f706fbL), tobe(0xceb42022L), tobe(0xca753d95L),
+tobe(0xf23a8028L), tobe(0xf6fb9d9fL), tobe(0xfbb8bb46L), tobe(0xff79a6f1L),
+tobe(0xe13ef6f4L), tobe(0xe5ffeb43L), tobe(0xe8bccd9aL), tobe(0xec7dd02dL),
+tobe(0x34867077L), tobe(0x30476dc0L), tobe(0x3d044b19L), tobe(0x39c556aeL),
+tobe(0x278206abL), tobe(0x23431b1cL), tobe(0x2e003dc5L), tobe(0x2ac12072L),
+tobe(0x128e9dcfL), tobe(0x164f8078L), tobe(0x1b0ca6a1L), tobe(0x1fcdbb16L),
+tobe(0x018aeb13L), tobe(0x054bf6a4L), tobe(0x0808d07dL), tobe(0x0cc9cdcaL),
+tobe(0x7897ab07L), tobe(0x7c56b6b0L), tobe(0x71159069L), tobe(0x75d48ddeL),
+tobe(0x6b93dddbL), tobe(0x6f52c06cL), tobe(0x6211e6b5L), tobe(0x66d0fb02L),
+tobe(0x5e9f46bfL), tobe(0x5a5e5b08L), tobe(0x571d7dd1L), tobe(0x53dc6066L),
+tobe(0x4d9b3063L), tobe(0x495a2dd4L), tobe(0x44190b0dL), tobe(0x40d816baL),
+tobe(0xaca5c697L), tobe(0xa864db20L), tobe(0xa527fdf9L), tobe(0xa1e6e04eL),
+tobe(0xbfa1b04bL), tobe(0xbb60adfcL), tobe(0xb6238b25L), tobe(0xb2e29692L),
+tobe(0x8aad2b2fL), tobe(0x8e6c3698L), tobe(0x832f1041L), tobe(0x87ee0df6L),
+tobe(0x99a95df3L), tobe(0x9d684044L), tobe(0x902b669dL), tobe(0x94ea7b2aL),
+tobe(0xe0b41de7L), tobe(0xe4750050L), tobe(0xe9362689L), tobe(0xedf73b3eL),
+tobe(0xf3b06b3bL), tobe(0xf771768cL), tobe(0xfa325055L), tobe(0xfef34de2L),
+tobe(0xc6bcf05fL), tobe(0xc27dede8L), tobe(0xcf3ecb31L), tobe(0xcbffd686L),
+tobe(0xd5b88683L), tobe(0xd1799b34L), tobe(0xdc3abdedL), tobe(0xd8fba05aL),
+tobe(0x690ce0eeL), tobe(0x6dcdfd59L), tobe(0x608edb80L), tobe(0x644fc637L),
+tobe(0x7a089632L), tobe(0x7ec98b85L), tobe(0x738aad5cL), tobe(0x774bb0ebL),
+tobe(0x4f040d56L), tobe(0x4bc510e1L), tobe(0x46863638L), tobe(0x42472b8fL),
+tobe(0x5c007b8aL), tobe(0x58c1663dL), tobe(0x558240e4L), tobe(0x51435d53L),
+tobe(0x251d3b9eL), tobe(0x21dc2629L), tobe(0x2c9f00f0L), tobe(0x285e1d47L),
+tobe(0x36194d42L), tobe(0x32d850f5L), tobe(0x3f9b762cL), tobe(0x3b5a6b9bL),
+tobe(0x0315d626L), tobe(0x07d4cb91L), tobe(0x0a97ed48L), tobe(0x0e56f0ffL),
+tobe(0x1011a0faL), tobe(0x14d0bd4dL), tobe(0x19939b94L), tobe(0x1d528623L),
+tobe(0xf12f560eL), tobe(0xf5ee4bb9L), tobe(0xf8ad6d60L), tobe(0xfc6c70d7L),
+tobe(0xe22b20d2L), tobe(0xe6ea3d65L), tobe(0xeba91bbcL), tobe(0xef68060bL),
+tobe(0xd727bbb6L), tobe(0xd3e6a601L), tobe(0xdea580d8L), tobe(0xda649d6fL),
+tobe(0xc423cd6aL), tobe(0xc0e2d0ddL), tobe(0xcda1f604L), tobe(0xc960ebb3L),
+tobe(0xbd3e8d7eL), tobe(0xb9ff90c9L), tobe(0xb4bcb610L), tobe(0xb07daba7L),
+tobe(0xae3afba2L), tobe(0xaafbe615L), tobe(0xa7b8c0ccL), tobe(0xa379dd7bL),
+tobe(0x9b3660c6L), tobe(0x9ff77d71L), tobe(0x92b45ba8L), tobe(0x9675461fL),
+tobe(0x8832161aL), tobe(0x8cf30badL), tobe(0x81b02d74L), tobe(0x857130c3L),
+tobe(0x5d8a9099L), tobe(0x594b8d2eL), tobe(0x5408abf7L), tobe(0x50c9b640L),
+tobe(0x4e8ee645L), tobe(0x4a4ffbf2L), tobe(0x470cdd2bL), tobe(0x43cdc09cL),
+tobe(0x7b827d21L), tobe(0x7f436096L), tobe(0x7200464fL), tobe(0x76c15bf8L),
+tobe(0x68860bfdL), tobe(0x6c47164aL), tobe(0x61043093L), tobe(0x65c52d24L),
+tobe(0x119b4be9L), tobe(0x155a565eL), tobe(0x18197087L), tobe(0x1cd86d30L),
+tobe(0x029f3d35L), tobe(0x065e2082L), tobe(0x0b1d065bL), tobe(0x0fdc1becL),
+tobe(0x3793a651L), tobe(0x3352bbe6L), tobe(0x3e119d3fL), tobe(0x3ad08088L),
+tobe(0x2497d08dL), tobe(0x2056cd3aL), tobe(0x2d15ebe3L), tobe(0x29d4f654L),
+tobe(0xc5a92679L), tobe(0xc1683bceL), tobe(0xcc2b1d17L), tobe(0xc8ea00a0L),
+tobe(0xd6ad50a5L), tobe(0xd26c4d12L), tobe(0xdf2f6bcbL), tobe(0xdbee767cL),
+tobe(0xe3a1cbc1L), tobe(0xe760d676L), tobe(0xea23f0afL), tobe(0xeee2ed18L),
+tobe(0xf0a5bd1dL), tobe(0xf464a0aaL), tobe(0xf9278673L), tobe(0xfde69bc4L),
+tobe(0x89b8fd09L), tobe(0x8d79e0beL), tobe(0x803ac667L), tobe(0x84fbdbd0L),
+tobe(0x9abc8bd5L), tobe(0x9e7d9662L), tobe(0x933eb0bbL), tobe(0x97ffad0cL),
+tobe(0xafb010b1L), tobe(0xab710d06L), tobe(0xa6322bdfL), tobe(0xa2f33668L),
+tobe(0xbcb4666dL), tobe(0xb8757bdaL), tobe(0xb5365d03L), tobe(0xb1f740b4L)
+};
+#endif
diff --git a/drivers/mtd/ubi/debug.c b/drivers/mtd/ubi/debug.c
new file mode 100644
index 000000000..492ab5cc8
--- /dev/null
+++ b/drivers/mtd/ubi/debug.c
@@ -0,0 +1,192 @@
+/*
+ * Copyright (c) International Business Machines Corp., 2006
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ * Author: Artem Bityutskiy (Битюцкий �ртём)
+ */
+
+/*
+ * Here we keep all the UBI debugging stuff which should normally be disabled
+ * and compiled-out, but it is extremely helpful when hunting bugs or doing big
+ * changes.
+ */
+#include <ubi_uboot.h>
+
+#ifdef CONFIG_MTD_UBI_DEBUG_MSG
+
+#include "ubi.h"
+
+/**
+ * ubi_dbg_dump_ec_hdr - dump an erase counter header.
+ * @ec_hdr: the erase counter header to dump
+ */
+void ubi_dbg_dump_ec_hdr(const struct ubi_ec_hdr *ec_hdr)
+{
+	dbg_msg("erase counter header dump:");
+	dbg_msg("magic          %#08x", be32_to_cpu(ec_hdr->magic));
+	dbg_msg("version        %d",    (int)ec_hdr->version);
+	dbg_msg("ec             %llu",  (long long)be64_to_cpu(ec_hdr->ec));
+	dbg_msg("vid_hdr_offset %d",    be32_to_cpu(ec_hdr->vid_hdr_offset));
+	dbg_msg("data_offset    %d",    be32_to_cpu(ec_hdr->data_offset));
+	dbg_msg("hdr_crc        %#08x", be32_to_cpu(ec_hdr->hdr_crc));
+	dbg_msg("erase counter header hexdump:");
+	print_hex_dump(KERN_DEBUG, "", DUMP_PREFIX_OFFSET, 32, 1,
+		       ec_hdr, UBI_EC_HDR_SIZE, 1);
+}
+
+/**
+ * ubi_dbg_dump_vid_hdr - dump a volume identifier header.
+ * @vid_hdr: the volume identifier header to dump
+ */
+void ubi_dbg_dump_vid_hdr(const struct ubi_vid_hdr *vid_hdr)
+{
+	dbg_msg("volume identifier header dump:");
+	dbg_msg("magic     %08x", be32_to_cpu(vid_hdr->magic));
+	dbg_msg("version   %d",   (int)vid_hdr->version);
+	dbg_msg("vol_type  %d",   (int)vid_hdr->vol_type);
+	dbg_msg("copy_flag %d",   (int)vid_hdr->copy_flag);
+	dbg_msg("compat    %d",   (int)vid_hdr->compat);
+	dbg_msg("vol_id    %d",   be32_to_cpu(vid_hdr->vol_id));
+	dbg_msg("lnum      %d",   be32_to_cpu(vid_hdr->lnum));
+	dbg_msg("leb_ver   %u",   be32_to_cpu(vid_hdr->leb_ver));
+	dbg_msg("data_size %d",   be32_to_cpu(vid_hdr->data_size));
+	dbg_msg("used_ebs  %d",   be32_to_cpu(vid_hdr->used_ebs));
+	dbg_msg("data_pad  %d",   be32_to_cpu(vid_hdr->data_pad));
+	dbg_msg("sqnum     %llu",
+		(unsigned long long)be64_to_cpu(vid_hdr->sqnum));
+	dbg_msg("hdr_crc   %08x", be32_to_cpu(vid_hdr->hdr_crc));
+	dbg_msg("volume identifier header hexdump:");
+}
+
+/**
+ * ubi_dbg_dump_vol_info- dump volume information.
+ * @vol: UBI volume description object
+ */
+void ubi_dbg_dump_vol_info(const struct ubi_volume *vol)
+{
+	dbg_msg("volume information dump:");
+	dbg_msg("vol_id          %d", vol->vol_id);
+	dbg_msg("reserved_pebs   %d", vol->reserved_pebs);
+	dbg_msg("alignment       %d", vol->alignment);
+	dbg_msg("data_pad        %d", vol->data_pad);
+	dbg_msg("vol_type        %d", vol->vol_type);
+	dbg_msg("name_len        %d", vol->name_len);
+	dbg_msg("usable_leb_size %d", vol->usable_leb_size);
+	dbg_msg("used_ebs        %d", vol->used_ebs);
+	dbg_msg("used_bytes      %lld", vol->used_bytes);
+	dbg_msg("last_eb_bytes   %d", vol->last_eb_bytes);
+	dbg_msg("corrupted       %d", vol->corrupted);
+	dbg_msg("upd_marker      %d", vol->upd_marker);
+
+	if (vol->name_len <= UBI_VOL_NAME_MAX &&
+	    strnlen(vol->name, vol->name_len + 1) == vol->name_len) {
+		dbg_msg("name            %s", vol->name);
+	} else {
+		dbg_msg("the 1st 5 characters of the name: %c%c%c%c%c",
+			vol->name[0], vol->name[1], vol->name[2],
+			vol->name[3], vol->name[4]);
+	}
+}
+
+/**
+ * ubi_dbg_dump_vtbl_record - dump a &struct ubi_vtbl_record object.
+ * @r: the object to dump
+ * @idx: volume table index
+ */
+void ubi_dbg_dump_vtbl_record(const struct ubi_vtbl_record *r, int idx)
+{
+	int name_len = be16_to_cpu(r->name_len);
+
+	dbg_msg("volume table record %d dump:", idx);
+	dbg_msg("reserved_pebs   %d", be32_to_cpu(r->reserved_pebs));
+	dbg_msg("alignment       %d", be32_to_cpu(r->alignment));
+	dbg_msg("data_pad        %d", be32_to_cpu(r->data_pad));
+	dbg_msg("vol_type        %d", (int)r->vol_type);
+	dbg_msg("upd_marker      %d", (int)r->upd_marker);
+	dbg_msg("name_len        %d", name_len);
+
+	if (r->name[0] == '\0') {
+		dbg_msg("name            NULL");
+		return;
+	}
+
+	if (name_len <= UBI_VOL_NAME_MAX &&
+	    strnlen(&r->name[0], name_len + 1) == name_len) {
+		dbg_msg("name            %s", &r->name[0]);
+	} else {
+		dbg_msg("1st 5 characters of the name: %c%c%c%c%c",
+			r->name[0], r->name[1], r->name[2], r->name[3],
+			r->name[4]);
+	}
+	dbg_msg("crc             %#08x", be32_to_cpu(r->crc));
+}
+
+/**
+ * ubi_dbg_dump_sv - dump a &struct ubi_scan_volume object.
+ * @sv: the object to dump
+ */
+void ubi_dbg_dump_sv(const struct ubi_scan_volume *sv)
+{
+	dbg_msg("volume scanning information dump:");
+	dbg_msg("vol_id         %d", sv->vol_id);
+	dbg_msg("highest_lnum   %d", sv->highest_lnum);
+	dbg_msg("leb_count      %d", sv->leb_count);
+	dbg_msg("compat         %d", sv->compat);
+	dbg_msg("vol_type       %d", sv->vol_type);
+	dbg_msg("used_ebs       %d", sv->used_ebs);
+	dbg_msg("last_data_size %d", sv->last_data_size);
+	dbg_msg("data_pad       %d", sv->data_pad);
+}
+
+/**
+ * ubi_dbg_dump_seb - dump a &struct ubi_scan_leb object.
+ * @seb: the object to dump
+ * @type: object type: 0 - not corrupted, 1 - corrupted
+ */
+void ubi_dbg_dump_seb(const struct ubi_scan_leb *seb, int type)
+{
+	dbg_msg("eraseblock scanning information dump:");
+	dbg_msg("ec       %d", seb->ec);
+	dbg_msg("pnum     %d", seb->pnum);
+	if (type == 0) {
+		dbg_msg("lnum     %d", seb->lnum);
+		dbg_msg("scrub    %d", seb->scrub);
+		dbg_msg("sqnum    %llu", seb->sqnum);
+		dbg_msg("leb_ver  %u", seb->leb_ver);
+	}
+}
+
+/**
+ * ubi_dbg_dump_mkvol_req - dump a &struct ubi_mkvol_req object.
+ * @req: the object to dump
+ */
+void ubi_dbg_dump_mkvol_req(const struct ubi_mkvol_req *req)
+{
+	char nm[17];
+
+	dbg_msg("volume creation request dump:");
+	dbg_msg("vol_id    %d",   req->vol_id);
+	dbg_msg("alignment %d",   req->alignment);
+	dbg_msg("bytes     %lld", (long long)req->bytes);
+	dbg_msg("vol_type  %d",   req->vol_type);
+	dbg_msg("name_len  %d",   req->name_len);
+
+	memcpy(nm, req->name, 16);
+	nm[16] = 0;
+	dbg_msg("the 1st 16 characters of the name: %s", nm);
+}
+
+#endif /* CONFIG_MTD_UBI_DEBUG_MSG */
diff --git a/drivers/mtd/ubi/debug.h b/drivers/mtd/ubi/debug.h
new file mode 100644
index 000000000..b44380b63
--- /dev/null
+++ b/drivers/mtd/ubi/debug.h
@@ -0,0 +1,152 @@
+/*
+ * Copyright (c) International Business Machines Corp., 2006
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ * Author: Artem Bityutskiy (Битюцкий �ртём)
+ */
+
+#ifndef __UBI_DEBUG_H__
+#define __UBI_DEBUG_H__
+
+#ifdef CONFIG_MTD_UBI_DEBUG
+#ifdef UBI_LINUX
+#include <linux/random.h>
+#endif
+
+#define ubi_assert(expr)  BUG_ON(!(expr))
+#define dbg_err(fmt, ...) ubi_err(fmt, ##__VA_ARGS__)
+#else
+#define ubi_assert(expr)  ({})
+#define dbg_err(fmt, ...) ({})
+#endif
+
+#ifdef CONFIG_MTD_UBI_DEBUG_DISABLE_BGT
+#define DBG_DISABLE_BGT 1
+#else
+#define DBG_DISABLE_BGT 0
+#endif
+
+#ifdef CONFIG_MTD_UBI_DEBUG_MSG
+/* Generic debugging message */
+#define dbg_msg(fmt, ...)                                    \
+	printk(KERN_DEBUG "UBI DBG: %s: " fmt "\n", \
+	       __FUNCTION__, ##__VA_ARGS__)
+
+#define ubi_dbg_dump_stack() dump_stack()
+
+struct ubi_ec_hdr;
+struct ubi_vid_hdr;
+struct ubi_volume;
+struct ubi_vtbl_record;
+struct ubi_scan_volume;
+struct ubi_scan_leb;
+struct ubi_mkvol_req;
+
+void ubi_dbg_dump_ec_hdr(const struct ubi_ec_hdr *ec_hdr);
+void ubi_dbg_dump_vid_hdr(const struct ubi_vid_hdr *vid_hdr);
+void ubi_dbg_dump_vol_info(const struct ubi_volume *vol);
+void ubi_dbg_dump_vtbl_record(const struct ubi_vtbl_record *r, int idx);
+void ubi_dbg_dump_sv(const struct ubi_scan_volume *sv);
+void ubi_dbg_dump_seb(const struct ubi_scan_leb *seb, int type);
+void ubi_dbg_dump_mkvol_req(const struct ubi_mkvol_req *req);
+
+#else
+
+#define dbg_msg(fmt, ...)    ({})
+#define ubi_dbg_dump_stack() ({})
+#define ubi_dbg_dump_ec_hdr(ec_hdr)      ({})
+#define ubi_dbg_dump_vid_hdr(vid_hdr)    ({})
+#define ubi_dbg_dump_vol_info(vol)       ({})
+#define ubi_dbg_dump_vtbl_record(r, idx) ({})
+#define ubi_dbg_dump_sv(sv)              ({})
+#define ubi_dbg_dump_seb(seb, type)      ({})
+#define ubi_dbg_dump_mkvol_req(req)      ({})
+
+#endif /* CONFIG_MTD_UBI_DEBUG_MSG */
+
+#ifdef CONFIG_MTD_UBI_DEBUG_MSG_EBA
+/* Messages from the eraseblock association unit */
+#define dbg_eba(fmt, ...) dbg_msg(fmt, ##__VA_ARGS__)
+#else
+#define dbg_eba(fmt, ...) ({})
+#endif
+
+#ifdef CONFIG_MTD_UBI_DEBUG_MSG_WL
+/* Messages from the wear-leveling unit */
+#define dbg_wl(fmt, ...) dbg_msg(fmt, ##__VA_ARGS__)
+#else
+#define dbg_wl(fmt, ...) ({})
+#endif
+
+#ifdef CONFIG_MTD_UBI_DEBUG_MSG_IO
+/* Messages from the input/output unit */
+#define dbg_io(fmt, ...) dbg_msg(fmt, ##__VA_ARGS__)
+#else
+#define dbg_io(fmt, ...) ({})
+#endif
+
+#ifdef CONFIG_MTD_UBI_DEBUG_MSG_BLD
+/* Initialization and build messages */
+#define dbg_bld(fmt, ...) dbg_msg(fmt, ##__VA_ARGS__)
+#else
+#define dbg_bld(fmt, ...) ({})
+#endif
+
+#ifdef CONFIG_MTD_UBI_DEBUG_EMULATE_BITFLIPS
+/**
+ * ubi_dbg_is_bitflip - if it is time to emulate a bit-flip.
+ *
+ * Returns non-zero if a bit-flip should be emulated, otherwise returns zero.
+ */
+static inline int ubi_dbg_is_bitflip(void)
+{
+	return !(random32() % 200);
+}
+#else
+#define ubi_dbg_is_bitflip() 0
+#endif
+
+#ifdef CONFIG_MTD_UBI_DEBUG_EMULATE_WRITE_FAILURES
+/**
+ * ubi_dbg_is_write_failure - if it is time to emulate a write failure.
+ *
+ * Returns non-zero if a write failure should be emulated, otherwise returns
+ * zero.
+ */
+static inline int ubi_dbg_is_write_failure(void)
+{
+	return !(random32() % 500);
+}
+#else
+#define ubi_dbg_is_write_failure() 0
+#endif
+
+#ifdef CONFIG_MTD_UBI_DEBUG_EMULATE_ERASE_FAILURES
+/**
+ * ubi_dbg_is_erase_failure - if its time to emulate an erase failure.
+ *
+ * Returns non-zero if an erase failure should be emulated, otherwise returns
+ * zero.
+ */
+static inline int ubi_dbg_is_erase_failure(void)
+{
+		return !(random32() % 400);
+}
+#else
+#define ubi_dbg_is_erase_failure() 0
+#endif
+
+#endif /* !__UBI_DEBUG_H__ */
diff --git a/drivers/mtd/ubi/eba.c b/drivers/mtd/ubi/eba.c
new file mode 100644
index 000000000..d523c94b1
--- /dev/null
+++ b/drivers/mtd/ubi/eba.c
@@ -0,0 +1,1256 @@
+/*
+ * Copyright (c) International Business Machines Corp., 2006
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ * Author: Artem Bityutskiy (Битюцкий �ртём)
+ */
+
+/*
+ * The UBI Eraseblock Association (EBA) unit.
+ *
+ * This unit is responsible for I/O to/from logical eraseblock.
+ *
+ * Although in this implementation the EBA table is fully kept and managed in
+ * RAM, which assumes poor scalability, it might be (partially) maintained on
+ * flash in future implementations.
+ *
+ * The EBA unit implements per-logical eraseblock locking. Before accessing a
+ * logical eraseblock it is locked for reading or writing. The per-logical
+ * eraseblock locking is implemented by means of the lock tree. The lock tree
+ * is an RB-tree which refers all the currently locked logical eraseblocks. The
+ * lock tree elements are &struct ubi_ltree_entry objects. They are indexed by
+ * (@vol_id, @lnum) pairs.
+ *
+ * EBA also maintains the global sequence counter which is incremented each
+ * time a logical eraseblock is mapped to a physical eraseblock and it is
+ * stored in the volume identifier header. This means that each VID header has
+ * a unique sequence number. The sequence number is only increased an we assume
+ * 64 bits is enough to never overflow.
+ */
+
+#ifdef UBI_LINUX
+#include <linux/slab.h>
+#include <linux/crc32.h>
+#include <linux/err.h>
+#endif
+
+#include <ubi_uboot.h>
+#include "ubi.h"
+
+/* Number of physical eraseblocks reserved for atomic LEB change operation */
+#define EBA_RESERVED_PEBS 1
+
+/**
+ * next_sqnum - get next sequence number.
+ * @ubi: UBI device description object
+ *
+ * This function returns next sequence number to use, which is just the current
+ * global sequence counter value. It also increases the global sequence
+ * counter.
+ */
+static unsigned long long next_sqnum(struct ubi_device *ubi)
+{
+	unsigned long long sqnum;
+
+	spin_lock(&ubi->ltree_lock);
+	sqnum = ubi->global_sqnum++;
+	spin_unlock(&ubi->ltree_lock);
+
+	return sqnum;
+}
+
+/**
+ * ubi_get_compat - get compatibility flags of a volume.
+ * @ubi: UBI device description object
+ * @vol_id: volume ID
+ *
+ * This function returns compatibility flags for an internal volume. User
+ * volumes have no compatibility flags, so %0 is returned.
+ */
+static int ubi_get_compat(const struct ubi_device *ubi, int vol_id)
+{
+	if (vol_id == UBI_LAYOUT_VOLUME_ID)
+		return UBI_LAYOUT_VOLUME_COMPAT;
+	return 0;
+}
+
+/**
+ * ltree_lookup - look up the lock tree.
+ * @ubi: UBI device description object
+ * @vol_id: volume ID
+ * @lnum: logical eraseblock number
+ *
+ * This function returns a pointer to the corresponding &struct ubi_ltree_entry
+ * object if the logical eraseblock is locked and %NULL if it is not.
+ * @ubi->ltree_lock has to be locked.
+ */
+static struct ubi_ltree_entry *ltree_lookup(struct ubi_device *ubi, int vol_id,
+					    int lnum)
+{
+	struct rb_node *p;
+
+	p = ubi->ltree.rb_node;
+	while (p) {
+		struct ubi_ltree_entry *le;
+
+		le = rb_entry(p, struct ubi_ltree_entry, rb);
+
+		if (vol_id < le->vol_id)
+			p = p->rb_left;
+		else if (vol_id > le->vol_id)
+			p = p->rb_right;
+		else {
+			if (lnum < le->lnum)
+				p = p->rb_left;
+			else if (lnum > le->lnum)
+				p = p->rb_right;
+			else
+				return le;
+		}
+	}
+
+	return NULL;
+}
+
+/**
+ * ltree_add_entry - add new entry to the lock tree.
+ * @ubi: UBI device description object
+ * @vol_id: volume ID
+ * @lnum: logical eraseblock number
+ *
+ * This function adds new entry for logical eraseblock (@vol_id, @lnum) to the
+ * lock tree. If such entry is already there, its usage counter is increased.
+ * Returns pointer to the lock tree entry or %-ENOMEM if memory allocation
+ * failed.
+ */
+static struct ubi_ltree_entry *ltree_add_entry(struct ubi_device *ubi,
+					       int vol_id, int lnum)
+{
+	struct ubi_ltree_entry *le, *le1, *le_free;
+
+	le = kmalloc(sizeof(struct ubi_ltree_entry), GFP_NOFS);
+	if (!le)
+		return ERR_PTR(-ENOMEM);
+
+	le->users = 0;
+	init_rwsem(&le->mutex);
+	le->vol_id = vol_id;
+	le->lnum = lnum;
+
+	spin_lock(&ubi->ltree_lock);
+	le1 = ltree_lookup(ubi, vol_id, lnum);
+
+	if (le1) {
+		/*
+		 * This logical eraseblock is already locked. The newly
+		 * allocated lock entry is not needed.
+		 */
+		le_free = le;
+		le = le1;
+	} else {
+		struct rb_node **p, *parent = NULL;
+
+		/*
+		 * No lock entry, add the newly allocated one to the
+		 * @ubi->ltree RB-tree.
+		 */
+		le_free = NULL;
+
+		p = &ubi->ltree.rb_node;
+		while (*p) {
+			parent = *p;
+			le1 = rb_entry(parent, struct ubi_ltree_entry, rb);
+
+			if (vol_id < le1->vol_id)
+				p = &(*p)->rb_left;
+			else if (vol_id > le1->vol_id)
+				p = &(*p)->rb_right;
+			else {
+				ubi_assert(lnum != le1->lnum);
+				if (lnum < le1->lnum)
+					p = &(*p)->rb_left;
+				else
+					p = &(*p)->rb_right;
+			}
+		}
+
+		rb_link_node(&le->rb, parent, p);
+		rb_insert_color(&le->rb, &ubi->ltree);
+	}
+	le->users += 1;
+	spin_unlock(&ubi->ltree_lock);
+
+	if (le_free)
+		kfree(le_free);
+
+	return le;
+}
+
+/**
+ * leb_read_lock - lock logical eraseblock for reading.
+ * @ubi: UBI device description object
+ * @vol_id: volume ID
+ * @lnum: logical eraseblock number
+ *
+ * This function locks a logical eraseblock for reading. Returns zero in case
+ * of success and a negative error code in case of failure.
+ */
+static int leb_read_lock(struct ubi_device *ubi, int vol_id, int lnum)
+{
+	struct ubi_ltree_entry *le;
+
+	le = ltree_add_entry(ubi, vol_id, lnum);
+	if (IS_ERR(le))
+		return PTR_ERR(le);
+	down_read(&le->mutex);
+	return 0;
+}
+
+/**
+ * leb_read_unlock - unlock logical eraseblock.
+ * @ubi: UBI device description object
+ * @vol_id: volume ID
+ * @lnum: logical eraseblock number
+ */
+static void leb_read_unlock(struct ubi_device *ubi, int vol_id, int lnum)
+{
+	int _free = 0;
+	struct ubi_ltree_entry *le;
+
+	spin_lock(&ubi->ltree_lock);
+	le = ltree_lookup(ubi, vol_id, lnum);
+	le->users -= 1;
+	ubi_assert(le->users >= 0);
+	if (le->users == 0) {
+		rb_erase(&le->rb, &ubi->ltree);
+		_free = 1;
+	}
+	spin_unlock(&ubi->ltree_lock);
+
+	up_read(&le->mutex);
+	if (_free)
+		kfree(le);
+}
+
+/**
+ * leb_write_lock - lock logical eraseblock for writing.
+ * @ubi: UBI device description object
+ * @vol_id: volume ID
+ * @lnum: logical eraseblock number
+ *
+ * This function locks a logical eraseblock for writing. Returns zero in case
+ * of success and a negative error code in case of failure.
+ */
+static int leb_write_lock(struct ubi_device *ubi, int vol_id, int lnum)
+{
+	struct ubi_ltree_entry *le;
+
+	le = ltree_add_entry(ubi, vol_id, lnum);
+	if (IS_ERR(le))
+		return PTR_ERR(le);
+	down_write(&le->mutex);
+	return 0;
+}
+
+/**
+ * leb_write_lock - lock logical eraseblock for writing.
+ * @ubi: UBI device description object
+ * @vol_id: volume ID
+ * @lnum: logical eraseblock number
+ *
+ * This function locks a logical eraseblock for writing if there is no
+ * contention and does nothing if there is contention. Returns %0 in case of
+ * success, %1 in case of contention, and and a negative error code in case of
+ * failure.
+ */
+static int leb_write_trylock(struct ubi_device *ubi, int vol_id, int lnum)
+{
+	int _free;
+	struct ubi_ltree_entry *le;
+
+	le = ltree_add_entry(ubi, vol_id, lnum);
+	if (IS_ERR(le))
+		return PTR_ERR(le);
+	if (down_write_trylock(&le->mutex))
+		return 0;
+
+	/* Contention, cancel */
+	spin_lock(&ubi->ltree_lock);
+	le->users -= 1;
+	ubi_assert(le->users >= 0);
+	if (le->users == 0) {
+		rb_erase(&le->rb, &ubi->ltree);
+		_free = 1;
+	} else
+		_free = 0;
+	spin_unlock(&ubi->ltree_lock);
+	if (_free)
+		kfree(le);
+
+	return 1;
+}
+
+/**
+ * leb_write_unlock - unlock logical eraseblock.
+ * @ubi: UBI device description object
+ * @vol_id: volume ID
+ * @lnum: logical eraseblock number
+ */
+static void leb_write_unlock(struct ubi_device *ubi, int vol_id, int lnum)
+{
+	int _free;
+	struct ubi_ltree_entry *le;
+
+	spin_lock(&ubi->ltree_lock);
+	le = ltree_lookup(ubi, vol_id, lnum);
+	le->users -= 1;
+	ubi_assert(le->users >= 0);
+	if (le->users == 0) {
+		rb_erase(&le->rb, &ubi->ltree);
+		_free = 1;
+	} else
+		_free = 0;
+	spin_unlock(&ubi->ltree_lock);
+
+	up_write(&le->mutex);
+	if (_free)
+		kfree(le);
+}
+
+/**
+ * ubi_eba_unmap_leb - un-map logical eraseblock.
+ * @ubi: UBI device description object
+ * @vol: volume description object
+ * @lnum: logical eraseblock number
+ *
+ * This function un-maps logical eraseblock @lnum and schedules corresponding
+ * physical eraseblock for erasure. Returns zero in case of success and a
+ * negative error code in case of failure.
+ */
+int ubi_eba_unmap_leb(struct ubi_device *ubi, struct ubi_volume *vol,
+		      int lnum)
+{
+	int err, pnum, vol_id = vol->vol_id;
+
+	if (ubi->ro_mode)
+		return -EROFS;
+
+	err = leb_write_lock(ubi, vol_id, lnum);
+	if (err)
+		return err;
+
+	pnum = vol->eba_tbl[lnum];
+	if (pnum < 0)
+		/* This logical eraseblock is already unmapped */
+		goto out_unlock;
+
+	dbg_eba("erase LEB %d:%d, PEB %d", vol_id, lnum, pnum);
+
+	vol->eba_tbl[lnum] = UBI_LEB_UNMAPPED;
+	err = ubi_wl_put_peb(ubi, pnum, 0);
+
+out_unlock:
+	leb_write_unlock(ubi, vol_id, lnum);
+	return err;
+}
+
+/**
+ * ubi_eba_read_leb - read data.
+ * @ubi: UBI device description object
+ * @vol: volume description object
+ * @lnum: logical eraseblock number
+ * @buf: buffer to store the read data
+ * @offset: offset from where to read
+ * @len: how many bytes to read
+ * @check: data CRC check flag
+ *
+ * If the logical eraseblock @lnum is unmapped, @buf is filled with 0xFF
+ * bytes. The @check flag only makes sense for static volumes and forces
+ * eraseblock data CRC checking.
+ *
+ * In case of success this function returns zero. In case of a static volume,
+ * if data CRC mismatches - %-EBADMSG is returned. %-EBADMSG may also be
+ * returned for any volume type if an ECC error was detected by the MTD device
+ * driver. Other negative error cored may be returned in case of other errors.
+ */
+int ubi_eba_read_leb(struct ubi_device *ubi, struct ubi_volume *vol, int lnum,
+		     void *buf, int offset, int len, int check)
+{
+	int err, pnum, scrub = 0, vol_id = vol->vol_id;
+	struct ubi_vid_hdr *vid_hdr;
+	uint32_t uninitialized_var(crc);
+
+	err = leb_read_lock(ubi, vol_id, lnum);
+	if (err)
+		return err;
+
+	pnum = vol->eba_tbl[lnum];
+	if (pnum < 0) {
+		/*
+		 * The logical eraseblock is not mapped, fill the whole buffer
+		 * with 0xFF bytes. The exception is static volumes for which
+		 * it is an error to read unmapped logical eraseblocks.
+		 */
+		dbg_eba("read %d bytes from offset %d of LEB %d:%d (unmapped)",
+			len, offset, vol_id, lnum);
+		leb_read_unlock(ubi, vol_id, lnum);
+		ubi_assert(vol->vol_type != UBI_STATIC_VOLUME);
+		memset(buf, 0xFF, len);
+		return 0;
+	}
+
+	dbg_eba("read %d bytes from offset %d of LEB %d:%d, PEB %d",
+		len, offset, vol_id, lnum, pnum);
+
+	if (vol->vol_type == UBI_DYNAMIC_VOLUME)
+		check = 0;
+
+retry:
+	if (check) {
+		vid_hdr = ubi_zalloc_vid_hdr(ubi, GFP_NOFS);
+		if (!vid_hdr) {
+			err = -ENOMEM;
+			goto out_unlock;
+		}
+
+		err = ubi_io_read_vid_hdr(ubi, pnum, vid_hdr, 1);
+		if (err && err != UBI_IO_BITFLIPS) {
+			if (err > 0) {
+				/*
+				 * The header is either absent or corrupted.
+				 * The former case means there is a bug -
+				 * switch to read-only mode just in case.
+				 * The latter case means a real corruption - we
+				 * may try to recover data. FIXME: but this is
+				 * not implemented.
+				 */
+				if (err == UBI_IO_BAD_VID_HDR) {
+					ubi_warn("bad VID header at PEB %d, LEB"
+						 "%d:%d", pnum, vol_id, lnum);
+					err = -EBADMSG;
+				} else
+					ubi_ro_mode(ubi);
+			}
+			goto out_free;
+		} else if (err == UBI_IO_BITFLIPS)
+			scrub = 1;
+
+		ubi_assert(lnum < be32_to_cpu(vid_hdr->used_ebs));
+		ubi_assert(len == be32_to_cpu(vid_hdr->data_size));
+
+		crc = be32_to_cpu(vid_hdr->data_crc);
+		ubi_free_vid_hdr(ubi, vid_hdr);
+	}
+
+	err = ubi_io_read_data(ubi, buf, pnum, offset, len);
+	if (err) {
+		if (err == UBI_IO_BITFLIPS) {
+			scrub = 1;
+			err = 0;
+		} else if (err == -EBADMSG) {
+			if (vol->vol_type == UBI_DYNAMIC_VOLUME)
+				goto out_unlock;
+			scrub = 1;
+			if (!check) {
+				ubi_msg("force data checking");
+				check = 1;
+				goto retry;
+			}
+		} else
+			goto out_unlock;
+	}
+
+	if (check) {
+		uint32_t crc1 = crc32(UBI_CRC32_INIT, buf, len);
+		if (crc1 != crc) {
+			ubi_warn("CRC error: calculated %#08x, must be %#08x",
+				 crc1, crc);
+			err = -EBADMSG;
+			goto out_unlock;
+		}
+	}
+
+	if (scrub)
+		err = ubi_wl_scrub_peb(ubi, pnum);
+
+	leb_read_unlock(ubi, vol_id, lnum);
+	return err;
+
+out_free:
+	ubi_free_vid_hdr(ubi, vid_hdr);
+out_unlock:
+	leb_read_unlock(ubi, vol_id, lnum);
+	return err;
+}
+
+/**
+ * recover_peb - recover from write failure.
+ * @ubi: UBI device description object
+ * @pnum: the physical eraseblock to recover
+ * @vol_id: volume ID
+ * @lnum: logical eraseblock number
+ * @buf: data which was not written because of the write failure
+ * @offset: offset of the failed write
+ * @len: how many bytes should have been written
+ *
+ * This function is called in case of a write failure and moves all good data
+ * from the potentially bad physical eraseblock to a good physical eraseblock.
+ * This function also writes the data which was not written due to the failure.
+ * Returns new physical eraseblock number in case of success, and a negative
+ * error code in case of failure.
+ */
+static int recover_peb(struct ubi_device *ubi, int pnum, int vol_id, int lnum,
+		       const void *buf, int offset, int len)
+{
+	int err, idx = vol_id2idx(ubi, vol_id), new_pnum, data_size, tries = 0;
+	struct ubi_volume *vol = ubi->volumes[idx];
+	struct ubi_vid_hdr *vid_hdr;
+
+	vid_hdr = ubi_zalloc_vid_hdr(ubi, GFP_NOFS);
+	if (!vid_hdr) {
+		return -ENOMEM;
+	}
+
+	mutex_lock(&ubi->buf_mutex);
+
+retry:
+	new_pnum = ubi_wl_get_peb(ubi, UBI_UNKNOWN);
+	if (new_pnum < 0) {
+		mutex_unlock(&ubi->buf_mutex);
+		ubi_free_vid_hdr(ubi, vid_hdr);
+		return new_pnum;
+	}
+
+	ubi_msg("recover PEB %d, move data to PEB %d", pnum, new_pnum);
+
+	err = ubi_io_read_vid_hdr(ubi, pnum, vid_hdr, 1);
+	if (err && err != UBI_IO_BITFLIPS) {
+		if (err > 0)
+			err = -EIO;
+		goto out_put;
+	}
+
+	vid_hdr->sqnum = cpu_to_be64(next_sqnum(ubi));
+	err = ubi_io_write_vid_hdr(ubi, new_pnum, vid_hdr);
+	if (err)
+		goto write_error;
+
+	data_size = offset + len;
+	memset(ubi->peb_buf1 + offset, 0xFF, len);
+
+	/* Read everything before the area where the write failure happened */
+	if (offset > 0) {
+		err = ubi_io_read_data(ubi, ubi->peb_buf1, pnum, 0, offset);
+		if (err && err != UBI_IO_BITFLIPS)
+			goto out_put;
+	}
+
+	memcpy(ubi->peb_buf1 + offset, buf, len);
+
+	err = ubi_io_write_data(ubi, ubi->peb_buf1, new_pnum, 0, data_size);
+	if (err)
+		goto write_error;
+
+	mutex_unlock(&ubi->buf_mutex);
+	ubi_free_vid_hdr(ubi, vid_hdr);
+
+	vol->eba_tbl[lnum] = new_pnum;
+	ubi_wl_put_peb(ubi, pnum, 1);
+
+	ubi_msg("data was successfully recovered");
+	return 0;
+
+out_put:
+	mutex_unlock(&ubi->buf_mutex);
+	ubi_wl_put_peb(ubi, new_pnum, 1);
+	ubi_free_vid_hdr(ubi, vid_hdr);
+	return err;
+
+write_error:
+	/*
+	 * Bad luck? This physical eraseblock is bad too? Crud. Let's try to
+	 * get another one.
+	 */
+	ubi_warn("failed to write to PEB %d", new_pnum);
+	ubi_wl_put_peb(ubi, new_pnum, 1);
+	if (++tries > UBI_IO_RETRIES) {
+		mutex_unlock(&ubi->buf_mutex);
+		ubi_free_vid_hdr(ubi, vid_hdr);
+		return err;
+	}
+	ubi_msg("try again");
+	goto retry;
+}
+
+/**
+ * ubi_eba_write_leb - write data to dynamic volume.
+ * @ubi: UBI device description object
+ * @vol: volume description object
+ * @lnum: logical eraseblock number
+ * @buf: the data to write
+ * @offset: offset within the logical eraseblock where to write
+ * @len: how many bytes to write
+ * @dtype: data type
+ *
+ * This function writes data to logical eraseblock @lnum of a dynamic volume
+ * @vol. Returns zero in case of success and a negative error code in case
+ * of failure. In case of error, it is possible that something was still
+ * written to the flash media, but may be some garbage.
+ */
+int ubi_eba_write_leb(struct ubi_device *ubi, struct ubi_volume *vol, int lnum,
+		      const void *buf, int offset, int len, int dtype)
+{
+	int err, pnum, tries = 0, vol_id = vol->vol_id;
+	struct ubi_vid_hdr *vid_hdr;
+
+	if (ubi->ro_mode)
+		return -EROFS;
+
+	err = leb_write_lock(ubi, vol_id, lnum);
+	if (err)
+		return err;
+
+	pnum = vol->eba_tbl[lnum];
+	if (pnum >= 0) {
+		dbg_eba("write %d bytes at offset %d of LEB %d:%d, PEB %d",
+			len, offset, vol_id, lnum, pnum);
+
+		err = ubi_io_write_data(ubi, buf, pnum, offset, len);
+		if (err) {
+			ubi_warn("failed to write data to PEB %d", pnum);
+			if (err == -EIO && ubi->bad_allowed)
+				err = recover_peb(ubi, pnum, vol_id, lnum, buf,
+						  offset, len);
+			if (err)
+				ubi_ro_mode(ubi);
+		}
+		leb_write_unlock(ubi, vol_id, lnum);
+		return err;
+	}
+
+	/*
+	 * The logical eraseblock is not mapped. We have to get a free physical
+	 * eraseblock and write the volume identifier header there first.
+	 */
+	vid_hdr = ubi_zalloc_vid_hdr(ubi, GFP_NOFS);
+	if (!vid_hdr) {
+		leb_write_unlock(ubi, vol_id, lnum);
+		return -ENOMEM;
+	}
+
+	vid_hdr->vol_type = UBI_VID_DYNAMIC;
+	vid_hdr->sqnum = cpu_to_be64(next_sqnum(ubi));
+	vid_hdr->vol_id = cpu_to_be32(vol_id);
+	vid_hdr->lnum = cpu_to_be32(lnum);
+	vid_hdr->compat = ubi_get_compat(ubi, vol_id);
+	vid_hdr->data_pad = cpu_to_be32(vol->data_pad);
+
+retry:
+	pnum = ubi_wl_get_peb(ubi, dtype);
+	if (pnum < 0) {
+		ubi_free_vid_hdr(ubi, vid_hdr);
+		leb_write_unlock(ubi, vol_id, lnum);
+		return pnum;
+	}
+
+	dbg_eba("write VID hdr and %d bytes at offset %d of LEB %d:%d, PEB %d",
+		len, offset, vol_id, lnum, pnum);
+
+	err = ubi_io_write_vid_hdr(ubi, pnum, vid_hdr);
+	if (err) {
+		ubi_warn("failed to write VID header to LEB %d:%d, PEB %d",
+			 vol_id, lnum, pnum);
+		goto write_error;
+	}
+
+	if (len) {
+		err = ubi_io_write_data(ubi, buf, pnum, offset, len);
+		if (err) {
+			ubi_warn("failed to write %d bytes at offset %d of "
+				 "LEB %d:%d, PEB %d", len, offset, vol_id,
+				 lnum, pnum);
+			goto write_error;
+		}
+	}
+
+	vol->eba_tbl[lnum] = pnum;
+
+	leb_write_unlock(ubi, vol_id, lnum);
+	ubi_free_vid_hdr(ubi, vid_hdr);
+	return 0;
+
+write_error:
+	if (err != -EIO || !ubi->bad_allowed) {
+		ubi_ro_mode(ubi);
+		leb_write_unlock(ubi, vol_id, lnum);
+		ubi_free_vid_hdr(ubi, vid_hdr);
+		return err;
+	}
+
+	/*
+	 * Fortunately, this is the first write operation to this physical
+	 * eraseblock, so just put it and request a new one. We assume that if
+	 * this physical eraseblock went bad, the erase code will handle that.
+	 */
+	err = ubi_wl_put_peb(ubi, pnum, 1);
+	if (err || ++tries > UBI_IO_RETRIES) {
+		ubi_ro_mode(ubi);
+		leb_write_unlock(ubi, vol_id, lnum);
+		ubi_free_vid_hdr(ubi, vid_hdr);
+		return err;
+	}
+
+	vid_hdr->sqnum = cpu_to_be64(next_sqnum(ubi));
+	ubi_msg("try another PEB");
+	goto retry;
+}
+
+/**
+ * ubi_eba_write_leb_st - write data to static volume.
+ * @ubi: UBI device description object
+ * @vol: volume description object
+ * @lnum: logical eraseblock number
+ * @buf: data to write
+ * @len: how many bytes to write
+ * @dtype: data type
+ * @used_ebs: how many logical eraseblocks will this volume contain
+ *
+ * This function writes data to logical eraseblock @lnum of static volume
+ * @vol. The @used_ebs argument should contain total number of logical
+ * eraseblock in this static volume.
+ *
+ * When writing to the last logical eraseblock, the @len argument doesn't have
+ * to be aligned to the minimal I/O unit size. Instead, it has to be equivalent
+ * to the real data size, although the @buf buffer has to contain the
+ * alignment. In all other cases, @len has to be aligned.
+ *
+ * It is prohibited to write more then once to logical eraseblocks of static
+ * volumes. This function returns zero in case of success and a negative error
+ * code in case of failure.
+ */
+int ubi_eba_write_leb_st(struct ubi_device *ubi, struct ubi_volume *vol,
+			 int lnum, const void *buf, int len, int dtype,
+			 int used_ebs)
+{
+	int err, pnum, tries = 0, data_size = len, vol_id = vol->vol_id;
+	struct ubi_vid_hdr *vid_hdr;
+	uint32_t crc;
+
+	if (ubi->ro_mode)
+		return -EROFS;
+
+	if (lnum == used_ebs - 1)
+		/* If this is the last LEB @len may be unaligned */
+		len = ALIGN(data_size, ubi->min_io_size);
+	else
+		ubi_assert(!(len & (ubi->min_io_size - 1)));
+
+	vid_hdr = ubi_zalloc_vid_hdr(ubi, GFP_NOFS);
+	if (!vid_hdr)
+		return -ENOMEM;
+
+	err = leb_write_lock(ubi, vol_id, lnum);
+	if (err) {
+		ubi_free_vid_hdr(ubi, vid_hdr);
+		return err;
+	}
+
+	vid_hdr->sqnum = cpu_to_be64(next_sqnum(ubi));
+	vid_hdr->vol_id = cpu_to_be32(vol_id);
+	vid_hdr->lnum = cpu_to_be32(lnum);
+	vid_hdr->compat = ubi_get_compat(ubi, vol_id);
+	vid_hdr->data_pad = cpu_to_be32(vol->data_pad);
+
+	crc = crc32(UBI_CRC32_INIT, buf, data_size);
+	vid_hdr->vol_type = UBI_VID_STATIC;
+	vid_hdr->data_size = cpu_to_be32(data_size);
+	vid_hdr->used_ebs = cpu_to_be32(used_ebs);
+	vid_hdr->data_crc = cpu_to_be32(crc);
+
+retry:
+	pnum = ubi_wl_get_peb(ubi, dtype);
+	if (pnum < 0) {
+		ubi_free_vid_hdr(ubi, vid_hdr);
+		leb_write_unlock(ubi, vol_id, lnum);
+		return pnum;
+	}
+
+	dbg_eba("write VID hdr and %d bytes at LEB %d:%d, PEB %d, used_ebs %d",
+		len, vol_id, lnum, pnum, used_ebs);
+
+	err = ubi_io_write_vid_hdr(ubi, pnum, vid_hdr);
+	if (err) {
+		ubi_warn("failed to write VID header to LEB %d:%d, PEB %d",
+			 vol_id, lnum, pnum);
+		goto write_error;
+	}
+
+	err = ubi_io_write_data(ubi, buf, pnum, 0, len);
+	if (err) {
+		ubi_warn("failed to write %d bytes of data to PEB %d",
+			 len, pnum);
+		goto write_error;
+	}
+
+	ubi_assert(vol->eba_tbl[lnum] < 0);
+	vol->eba_tbl[lnum] = pnum;
+
+	leb_write_unlock(ubi, vol_id, lnum);
+	ubi_free_vid_hdr(ubi, vid_hdr);
+	return 0;
+
+write_error:
+	if (err != -EIO || !ubi->bad_allowed) {
+		/*
+		 * This flash device does not admit of bad eraseblocks or
+		 * something nasty and unexpected happened. Switch to read-only
+		 * mode just in case.
+		 */
+		ubi_ro_mode(ubi);
+		leb_write_unlock(ubi, vol_id, lnum);
+		ubi_free_vid_hdr(ubi, vid_hdr);
+		return err;
+	}
+
+	err = ubi_wl_put_peb(ubi, pnum, 1);
+	if (err || ++tries > UBI_IO_RETRIES) {
+		ubi_ro_mode(ubi);
+		leb_write_unlock(ubi, vol_id, lnum);
+		ubi_free_vid_hdr(ubi, vid_hdr);
+		return err;
+	}
+
+	vid_hdr->sqnum = cpu_to_be64(next_sqnum(ubi));
+	ubi_msg("try another PEB");
+	goto retry;
+}
+
+/*
+ * ubi_eba_atomic_leb_change - change logical eraseblock atomically.
+ * @ubi: UBI device description object
+ * @vol: volume description object
+ * @lnum: logical eraseblock number
+ * @buf: data to write
+ * @len: how many bytes to write
+ * @dtype: data type
+ *
+ * This function changes the contents of a logical eraseblock atomically. @buf
+ * has to contain new logical eraseblock data, and @len - the length of the
+ * data, which has to be aligned. This function guarantees that in case of an
+ * unclean reboot the old contents is preserved. Returns zero in case of
+ * success and a negative error code in case of failure.
+ *
+ * UBI reserves one LEB for the "atomic LEB change" operation, so only one
+ * LEB change may be done at a time. This is ensured by @ubi->alc_mutex.
+ */
+int ubi_eba_atomic_leb_change(struct ubi_device *ubi, struct ubi_volume *vol,
+			      int lnum, const void *buf, int len, int dtype)
+{
+	int err, pnum, tries = 0, vol_id = vol->vol_id;
+	struct ubi_vid_hdr *vid_hdr;
+	uint32_t crc;
+
+	if (ubi->ro_mode)
+		return -EROFS;
+
+	if (len == 0) {
+		/*
+		 * Special case when data length is zero. In this case the LEB
+		 * has to be unmapped and mapped somewhere else.
+		 */
+		err = ubi_eba_unmap_leb(ubi, vol, lnum);
+		if (err)
+			return err;
+		return ubi_eba_write_leb(ubi, vol, lnum, NULL, 0, 0, dtype);
+	}
+
+	vid_hdr = ubi_zalloc_vid_hdr(ubi, GFP_NOFS);
+	if (!vid_hdr)
+		return -ENOMEM;
+
+	mutex_lock(&ubi->alc_mutex);
+	err = leb_write_lock(ubi, vol_id, lnum);
+	if (err)
+		goto out_mutex;
+
+	vid_hdr->sqnum = cpu_to_be64(next_sqnum(ubi));
+	vid_hdr->vol_id = cpu_to_be32(vol_id);
+	vid_hdr->lnum = cpu_to_be32(lnum);
+	vid_hdr->compat = ubi_get_compat(ubi, vol_id);
+	vid_hdr->data_pad = cpu_to_be32(vol->data_pad);
+
+	crc = crc32(UBI_CRC32_INIT, buf, len);
+	vid_hdr->vol_type = UBI_VID_DYNAMIC;
+	vid_hdr->data_size = cpu_to_be32(len);
+	vid_hdr->copy_flag = 1;
+	vid_hdr->data_crc = cpu_to_be32(crc);
+
+retry:
+	pnum = ubi_wl_get_peb(ubi, dtype);
+	if (pnum < 0) {
+		err = pnum;
+		goto out_leb_unlock;
+	}
+
+	dbg_eba("change LEB %d:%d, PEB %d, write VID hdr to PEB %d",
+		vol_id, lnum, vol->eba_tbl[lnum], pnum);
+
+	err = ubi_io_write_vid_hdr(ubi, pnum, vid_hdr);
+	if (err) {
+		ubi_warn("failed to write VID header to LEB %d:%d, PEB %d",
+			 vol_id, lnum, pnum);
+		goto write_error;
+	}
+
+	err = ubi_io_write_data(ubi, buf, pnum, 0, len);
+	if (err) {
+		ubi_warn("failed to write %d bytes of data to PEB %d",
+			 len, pnum);
+		goto write_error;
+	}
+
+	if (vol->eba_tbl[lnum] >= 0) {
+		err = ubi_wl_put_peb(ubi, vol->eba_tbl[lnum], 1);
+		if (err)
+			goto out_leb_unlock;
+	}
+
+	vol->eba_tbl[lnum] = pnum;
+
+out_leb_unlock:
+	leb_write_unlock(ubi, vol_id, lnum);
+out_mutex:
+	mutex_unlock(&ubi->alc_mutex);
+	ubi_free_vid_hdr(ubi, vid_hdr);
+	return err;
+
+write_error:
+	if (err != -EIO || !ubi->bad_allowed) {
+		/*
+		 * This flash device does not admit of bad eraseblocks or
+		 * something nasty and unexpected happened. Switch to read-only
+		 * mode just in case.
+		 */
+		ubi_ro_mode(ubi);
+		goto out_leb_unlock;
+	}
+
+	err = ubi_wl_put_peb(ubi, pnum, 1);
+	if (err || ++tries > UBI_IO_RETRIES) {
+		ubi_ro_mode(ubi);
+		goto out_leb_unlock;
+	}
+
+	vid_hdr->sqnum = cpu_to_be64(next_sqnum(ubi));
+	ubi_msg("try another PEB");
+	goto retry;
+}
+
+/**
+ * ubi_eba_copy_leb - copy logical eraseblock.
+ * @ubi: UBI device description object
+ * @from: physical eraseblock number from where to copy
+ * @to: physical eraseblock number where to copy
+ * @vid_hdr: VID header of the @from physical eraseblock
+ *
+ * This function copies logical eraseblock from physical eraseblock @from to
+ * physical eraseblock @to. The @vid_hdr buffer may be changed by this
+ * function. Returns:
+ *   o %0  in case of success;
+ *   o %1 if the operation was canceled and should be tried later (e.g.,
+ *     because a bit-flip was detected at the target PEB);
+ *   o %2 if the volume is being deleted and this LEB should not be moved.
+ */
+int ubi_eba_copy_leb(struct ubi_device *ubi, int from, int to,
+		     struct ubi_vid_hdr *vid_hdr)
+{
+	int err, vol_id, lnum, data_size, aldata_size, idx;
+	struct ubi_volume *vol;
+	uint32_t crc;
+
+	vol_id = be32_to_cpu(vid_hdr->vol_id);
+	lnum = be32_to_cpu(vid_hdr->lnum);
+
+	dbg_eba("copy LEB %d:%d, PEB %d to PEB %d", vol_id, lnum, from, to);
+
+	if (vid_hdr->vol_type == UBI_VID_STATIC) {
+		data_size = be32_to_cpu(vid_hdr->data_size);
+		aldata_size = ALIGN(data_size, ubi->min_io_size);
+	} else
+		data_size = aldata_size =
+			    ubi->leb_size - be32_to_cpu(vid_hdr->data_pad);
+
+	idx = vol_id2idx(ubi, vol_id);
+	spin_lock(&ubi->volumes_lock);
+	/*
+	 * Note, we may race with volume deletion, which means that the volume
+	 * this logical eraseblock belongs to might be being deleted. Since the
+	 * volume deletion unmaps all the volume's logical eraseblocks, it will
+	 * be locked in 'ubi_wl_put_peb()' and wait for the WL worker to finish.
+	 */
+	vol = ubi->volumes[idx];
+	if (!vol) {
+		/* No need to do further work, cancel */
+		dbg_eba("volume %d is being removed, cancel", vol_id);
+		spin_unlock(&ubi->volumes_lock);
+		return 2;
+	}
+	spin_unlock(&ubi->volumes_lock);
+
+	/*
+	 * We do not want anybody to write to this logical eraseblock while we
+	 * are moving it, so lock it.
+	 *
+	 * Note, we are using non-waiting locking here, because we cannot sleep
+	 * on the LEB, since it may cause deadlocks. Indeed, imagine a task is
+	 * unmapping the LEB which is mapped to the PEB we are going to move
+	 * (@from). This task locks the LEB and goes sleep in the
+	 * 'ubi_wl_put_peb()' function on the @ubi->move_mutex. In turn, we are
+	 * holding @ubi->move_mutex and go sleep on the LEB lock. So, if the
+	 * LEB is already locked, we just do not move it and return %1.
+	 */
+	err = leb_write_trylock(ubi, vol_id, lnum);
+	if (err) {
+		dbg_eba("contention on LEB %d:%d, cancel", vol_id, lnum);
+		return err;
+	}
+
+	/*
+	 * The LEB might have been put meanwhile, and the task which put it is
+	 * probably waiting on @ubi->move_mutex. No need to continue the work,
+	 * cancel it.
+	 */
+	if (vol->eba_tbl[lnum] != from) {
+		dbg_eba("LEB %d:%d is no longer mapped to PEB %d, mapped to "
+			"PEB %d, cancel", vol_id, lnum, from,
+			vol->eba_tbl[lnum]);
+		err = 1;
+		goto out_unlock_leb;
+	}
+
+	/*
+	 * OK, now the LEB is locked and we can safely start moving iy. Since
+	 * this function utilizes thie @ubi->peb1_buf buffer which is shared
+	 * with some other functions, so lock the buffer by taking the
+	 * @ubi->buf_mutex.
+	 */
+	mutex_lock(&ubi->buf_mutex);
+	dbg_eba("read %d bytes of data", aldata_size);
+	err = ubi_io_read_data(ubi, ubi->peb_buf1, from, 0, aldata_size);
+	if (err && err != UBI_IO_BITFLIPS) {
+		ubi_warn("error %d while reading data from PEB %d",
+			 err, from);
+		goto out_unlock_buf;
+	}
+
+	/*
+	 * Now we have got to calculate how much data we have to to copy. In
+	 * case of a static volume it is fairly easy - the VID header contains
+	 * the data size. In case of a dynamic volume it is more difficult - we
+	 * have to read the contents, cut 0xFF bytes from the end and copy only
+	 * the first part. We must do this to avoid writing 0xFF bytes as it
+	 * may have some side-effects. And not only this. It is important not
+	 * to include those 0xFFs to CRC because later the they may be filled
+	 * by data.
+	 */
+	if (vid_hdr->vol_type == UBI_VID_DYNAMIC)
+		aldata_size = data_size =
+			ubi_calc_data_len(ubi, ubi->peb_buf1, data_size);
+
+	cond_resched();
+	crc = crc32(UBI_CRC32_INIT, ubi->peb_buf1, data_size);
+	cond_resched();
+
+	/*
+	 * It may turn out to me that the whole @from physical eraseblock
+	 * contains only 0xFF bytes. Then we have to only write the VID header
+	 * and do not write any data. This also means we should not set
+	 * @vid_hdr->copy_flag, @vid_hdr->data_size, and @vid_hdr->data_crc.
+	 */
+	if (data_size > 0) {
+		vid_hdr->copy_flag = 1;
+		vid_hdr->data_size = cpu_to_be32(data_size);
+		vid_hdr->data_crc = cpu_to_be32(crc);
+	}
+	vid_hdr->sqnum = cpu_to_be64(next_sqnum(ubi));
+
+	err = ubi_io_write_vid_hdr(ubi, to, vid_hdr);
+	if (err)
+		goto out_unlock_buf;
+
+	cond_resched();
+
+	/* Read the VID header back and check if it was written correctly */
+	err = ubi_io_read_vid_hdr(ubi, to, vid_hdr, 1);
+	if (err) {
+		if (err != UBI_IO_BITFLIPS)
+			ubi_warn("cannot read VID header back from PEB %d", to);
+		else
+			err = 1;
+		goto out_unlock_buf;
+	}
+
+	if (data_size > 0) {
+		err = ubi_io_write_data(ubi, ubi->peb_buf1, to, 0, aldata_size);
+		if (err)
+			goto out_unlock_buf;
+
+		cond_resched();
+
+		/*
+		 * We've written the data and are going to read it back to make
+		 * sure it was written correctly.
+		 */
+
+		err = ubi_io_read_data(ubi, ubi->peb_buf2, to, 0, aldata_size);
+		if (err) {
+			if (err != UBI_IO_BITFLIPS)
+				ubi_warn("cannot read data back from PEB %d",
+					 to);
+			else
+				err = 1;
+			goto out_unlock_buf;
+		}
+
+		cond_resched();
+
+		if (memcmp(ubi->peb_buf1, ubi->peb_buf2, aldata_size)) {
+			ubi_warn("read data back from PEB %d - it is different",
+				 to);
+			goto out_unlock_buf;
+		}
+	}
+
+	ubi_assert(vol->eba_tbl[lnum] == from);
+	vol->eba_tbl[lnum] = to;
+
+out_unlock_buf:
+	mutex_unlock(&ubi->buf_mutex);
+out_unlock_leb:
+	leb_write_unlock(ubi, vol_id, lnum);
+	return err;
+}
+
+/**
+ * ubi_eba_init_scan - initialize the EBA unit using scanning information.
+ * @ubi: UBI device description object
+ * @si: scanning information
+ *
+ * This function returns zero in case of success and a negative error code in
+ * case of failure.
+ */
+int ubi_eba_init_scan(struct ubi_device *ubi, struct ubi_scan_info *si)
+{
+	int i, j, err, num_volumes;
+	struct ubi_scan_volume *sv;
+	struct ubi_volume *vol;
+	struct ubi_scan_leb *seb;
+	struct rb_node *rb;
+
+	dbg_eba("initialize EBA unit");
+
+	spin_lock_init(&ubi->ltree_lock);
+	mutex_init(&ubi->alc_mutex);
+	ubi->ltree = RB_ROOT;
+
+	ubi->global_sqnum = si->max_sqnum + 1;
+	num_volumes = ubi->vtbl_slots + UBI_INT_VOL_COUNT;
+
+	for (i = 0; i < num_volumes; i++) {
+		vol = ubi->volumes[i];
+		if (!vol)
+			continue;
+
+		cond_resched();
+
+		vol->eba_tbl = kmalloc(vol->reserved_pebs * sizeof(int),
+				       GFP_KERNEL);
+		if (!vol->eba_tbl) {
+			err = -ENOMEM;
+			goto out_free;
+		}
+
+		for (j = 0; j < vol->reserved_pebs; j++)
+			vol->eba_tbl[j] = UBI_LEB_UNMAPPED;
+
+		sv = ubi_scan_find_sv(si, idx2vol_id(ubi, i));
+		if (!sv)
+			continue;
+
+		ubi_rb_for_each_entry(rb, seb, &sv->root, u.rb) {
+			if (seb->lnum >= vol->reserved_pebs)
+				/*
+				 * This may happen in case of an unclean reboot
+				 * during re-size.
+				 */
+				ubi_scan_move_to_list(sv, seb, &si->erase);
+			vol->eba_tbl[seb->lnum] = seb->pnum;
+		}
+	}
+
+	if (ubi->avail_pebs < EBA_RESERVED_PEBS) {
+		ubi_err("no enough physical eraseblocks (%d, need %d)",
+			ubi->avail_pebs, EBA_RESERVED_PEBS);
+		err = -ENOSPC;
+		goto out_free;
+	}
+	ubi->avail_pebs -= EBA_RESERVED_PEBS;
+	ubi->rsvd_pebs += EBA_RESERVED_PEBS;
+
+	if (ubi->bad_allowed) {
+		ubi_calculate_reserved(ubi);
+
+		if (ubi->avail_pebs < ubi->beb_rsvd_level) {
+			/* No enough free physical eraseblocks */
+			ubi->beb_rsvd_pebs = ubi->avail_pebs;
+			ubi_warn("cannot reserve enough PEBs for bad PEB "
+				 "handling, reserved %d, need %d",
+				 ubi->beb_rsvd_pebs, ubi->beb_rsvd_level);
+		} else
+			ubi->beb_rsvd_pebs = ubi->beb_rsvd_level;
+
+		ubi->avail_pebs -= ubi->beb_rsvd_pebs;
+		ubi->rsvd_pebs  += ubi->beb_rsvd_pebs;
+	}
+
+	dbg_eba("EBA unit is initialized");
+	return 0;
+
+out_free:
+	for (i = 0; i < num_volumes; i++) {
+		if (!ubi->volumes[i])
+			continue;
+		kfree(ubi->volumes[i]->eba_tbl);
+	}
+	return err;
+}
+
+/**
+ * ubi_eba_close - close EBA unit.
+ * @ubi: UBI device description object
+ */
+void ubi_eba_close(const struct ubi_device *ubi)
+{
+	int i, num_volumes = ubi->vtbl_slots + UBI_INT_VOL_COUNT;
+
+	dbg_eba("close EBA unit");
+
+	for (i = 0; i < num_volumes; i++) {
+		if (!ubi->volumes[i])
+			continue;
+		kfree(ubi->volumes[i]->eba_tbl);
+	}
+}
diff --git a/drivers/mtd/ubi/io.c b/drivers/mtd/ubi/io.c
new file mode 100644
index 000000000..842389400
--- /dev/null
+++ b/drivers/mtd/ubi/io.c
@@ -0,0 +1,1274 @@
+/*
+ * Copyright (c) International Business Machines Corp., 2006
+ * Copyright (c) Nokia Corporation, 2006, 2007
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ * Author: Artem Bityutskiy (Битюцкий �ртём)
+ */
+
+/*
+ * UBI input/output unit.
+ *
+ * This unit provides a uniform way to work with all kinds of the underlying
+ * MTD devices. It also implements handy functions for reading and writing UBI
+ * headers.
+ *
+ * We are trying to have a paranoid mindset and not to trust to what we read
+ * from the flash media in order to be more secure and robust. So this unit
+ * validates every single header it reads from the flash media.
+ *
+ * Some words about how the eraseblock headers are stored.
+ *
+ * The erase counter header is always stored at offset zero. By default, the
+ * VID header is stored after the EC header at the closest aligned offset
+ * (i.e. aligned to the minimum I/O unit size). Data starts next to the VID
+ * header at the closest aligned offset. But this default layout may be
+ * changed. For example, for different reasons (e.g., optimization) UBI may be
+ * asked to put the VID header at further offset, and even at an unaligned
+ * offset. Of course, if the offset of the VID header is unaligned, UBI adds
+ * proper padding in front of it. Data offset may also be changed but it has to
+ * be aligned.
+ *
+ * About minimal I/O units. In general, UBI assumes flash device model where
+ * there is only one minimal I/O unit size. E.g., in case of NOR flash it is 1,
+ * in case of NAND flash it is a NAND page, etc. This is reported by MTD in the
+ * @ubi->mtd->writesize field. But as an exception, UBI admits of using another
+ * (smaller) minimal I/O unit size for EC and VID headers to make it possible
+ * to do different optimizations.
+ *
+ * This is extremely useful in case of NAND flashes which admit of several
+ * write operations to one NAND page. In this case UBI can fit EC and VID
+ * headers at one NAND page. Thus, UBI may use "sub-page" size as the minimal
+ * I/O unit for the headers (the @ubi->hdrs_min_io_size field). But it still
+ * reports NAND page size (@ubi->min_io_size) as a minimal I/O unit for the UBI
+ * users.
+ *
+ * Example: some Samsung NANDs with 2KiB pages allow 4x 512-byte writes, so
+ * although the minimal I/O unit is 2K, UBI uses 512 bytes for EC and VID
+ * headers.
+ *
+ * Q: why not just to treat sub-page as a minimal I/O unit of this flash
+ * device, e.g., make @ubi->min_io_size = 512 in the example above?
+ *
+ * A: because when writing a sub-page, MTD still writes a full 2K page but the
+ * bytes which are no relevant to the sub-page are 0xFF. So, basically, writing
+ * 4x512 sub-pages is 4 times slower then writing one 2KiB NAND page. Thus, we
+ * prefer to use sub-pages only for EV and VID headers.
+ *
+ * As it was noted above, the VID header may start at a non-aligned offset.
+ * For example, in case of a 2KiB page NAND flash with a 512 bytes sub-page,
+ * the VID header may reside at offset 1984 which is the last 64 bytes of the
+ * last sub-page (EC header is always at offset zero). This causes some
+ * difficulties when reading and writing VID headers.
+ *
+ * Suppose we have a 64-byte buffer and we read a VID header at it. We change
+ * the data and want to write this VID header out. As we can only write in
+ * 512-byte chunks, we have to allocate one more buffer and copy our VID header
+ * to offset 448 of this buffer.
+ *
+ * The I/O unit does the following trick in order to avoid this extra copy.
+ * It always allocates a @ubi->vid_hdr_alsize bytes buffer for the VID header
+ * and returns a pointer to offset @ubi->vid_hdr_shift of this buffer. When the
+ * VID header is being written out, it shifts the VID header pointer back and
+ * writes the whole sub-page.
+ */
+
+#ifdef UBI_LINUX
+#include <linux/crc32.h>
+#include <linux/err.h>
+#endif
+
+#include <ubi_uboot.h>
+#include "ubi.h"
+
+#ifdef CONFIG_MTD_UBI_DEBUG_PARANOID
+static int paranoid_check_not_bad(const struct ubi_device *ubi, int pnum);
+static int paranoid_check_peb_ec_hdr(const struct ubi_device *ubi, int pnum);
+static int paranoid_check_ec_hdr(const struct ubi_device *ubi, int pnum,
+				 const struct ubi_ec_hdr *ec_hdr);
+static int paranoid_check_peb_vid_hdr(const struct ubi_device *ubi, int pnum);
+static int paranoid_check_vid_hdr(const struct ubi_device *ubi, int pnum,
+				  const struct ubi_vid_hdr *vid_hdr);
+static int paranoid_check_all_ff(struct ubi_device *ubi, int pnum, int offset,
+				 int len);
+#else
+#define paranoid_check_not_bad(ubi, pnum) 0
+#define paranoid_check_peb_ec_hdr(ubi, pnum)  0
+#define paranoid_check_ec_hdr(ubi, pnum, ec_hdr)  0
+#define paranoid_check_peb_vid_hdr(ubi, pnum) 0
+#define paranoid_check_vid_hdr(ubi, pnum, vid_hdr) 0
+#define paranoid_check_all_ff(ubi, pnum, offset, len) 0
+#endif
+
+/**
+ * ubi_io_read - read data from a physical eraseblock.
+ * @ubi: UBI device description object
+ * @buf: buffer where to store the read data
+ * @pnum: physical eraseblock number to read from
+ * @offset: offset within the physical eraseblock from where to read
+ * @len: how many bytes to read
+ *
+ * This function reads data from offset @offset of physical eraseblock @pnum
+ * and stores the read data in the @buf buffer. The following return codes are
+ * possible:
+ *
+ * o %0 if all the requested data were successfully read;
+ * o %UBI_IO_BITFLIPS if all the requested data were successfully read, but
+ *   correctable bit-flips were detected; this is harmless but may indicate
+ *   that this eraseblock may become bad soon (but do not have to);
+ * o %-EBADMSG if the MTD subsystem reported about data integrity problems, for
+ *   example it can be an ECC error in case of NAND; this most probably means
+ *   that the data is corrupted;
+ * o %-EIO if some I/O error occurred;
+ * o other negative error codes in case of other errors.
+ */
+int ubi_io_read(const struct ubi_device *ubi, void *buf, int pnum, int offset,
+		int len)
+{
+	int err, retries = 0;
+	size_t read;
+	loff_t addr;
+
+	dbg_io("read %d bytes from PEB %d:%d", len, pnum, offset);
+
+	ubi_assert(pnum >= 0 && pnum < ubi->peb_count);
+	ubi_assert(offset >= 0 && offset + len <= ubi->peb_size);
+	ubi_assert(len > 0);
+
+	err = paranoid_check_not_bad(ubi, pnum);
+	if (err)
+		return err > 0 ? -EINVAL : err;
+
+	addr = (loff_t)pnum * ubi->peb_size + offset;
+retry:
+	err = ubi->mtd->read(ubi->mtd, addr, len, &read, buf);
+	if (err) {
+		if (err == -EUCLEAN) {
+			/*
+			 * -EUCLEAN is reported if there was a bit-flip which
+			 * was corrected, so this is harmless.
+			 */
+			ubi_msg("fixable bit-flip detected at PEB %d", pnum);
+			ubi_assert(len == read);
+			return UBI_IO_BITFLIPS;
+		}
+
+		if (read != len && retries++ < UBI_IO_RETRIES) {
+			dbg_io("error %d while reading %d bytes from PEB %d:%d, "
+			       "read only %zd bytes, retry",
+			       err, len, pnum, offset, read);
+			yield();
+			goto retry;
+		}
+
+		ubi_err("error %d while reading %d bytes from PEB %d:%d, "
+			"read %zd bytes", err, len, pnum, offset, read);
+		ubi_dbg_dump_stack();
+
+		/*
+		 * The driver should never return -EBADMSG if it failed to read
+		 * all the requested data. But some buggy drivers might do
+		 * this, so we change it to -EIO.
+		 */
+		if (read != len && err == -EBADMSG) {
+			ubi_assert(0);
+			printk("%s[%d] not here\n", __func__, __LINE__);
+/*			err = -EIO; */
+		}
+	} else {
+		ubi_assert(len == read);
+
+		if (ubi_dbg_is_bitflip()) {
+			dbg_msg("bit-flip (emulated)");
+			err = UBI_IO_BITFLIPS;
+		}
+	}
+
+	return err;
+}
+
+/**
+ * ubi_io_write - write data to a physical eraseblock.
+ * @ubi: UBI device description object
+ * @buf: buffer with the data to write
+ * @pnum: physical eraseblock number to write to
+ * @offset: offset within the physical eraseblock where to write
+ * @len: how many bytes to write
+ *
+ * This function writes @len bytes of data from buffer @buf to offset @offset
+ * of physical eraseblock @pnum. If all the data were successfully written,
+ * zero is returned. If an error occurred, this function returns a negative
+ * error code. If %-EIO is returned, the physical eraseblock most probably went
+ * bad.
+ *
+ * Note, in case of an error, it is possible that something was still written
+ * to the flash media, but may be some garbage.
+ */
+int ubi_io_write(struct ubi_device *ubi, const void *buf, int pnum, int offset,
+		 int len)
+{
+	int err;
+	size_t written;
+	loff_t addr;
+
+	dbg_io("write %d bytes to PEB %d:%d", len, pnum, offset);
+
+	ubi_assert(pnum >= 0 && pnum < ubi->peb_count);
+	ubi_assert(offset >= 0 && offset + len <= ubi->peb_size);
+	ubi_assert(offset % ubi->hdrs_min_io_size == 0);
+	ubi_assert(len > 0 && len % ubi->hdrs_min_io_size == 0);
+
+	if (ubi->ro_mode) {
+		ubi_err("read-only mode");
+		return -EROFS;
+	}
+
+	/* The below has to be compiled out if paranoid checks are disabled */
+
+	err = paranoid_check_not_bad(ubi, pnum);
+	if (err)
+		return err > 0 ? -EINVAL : err;
+
+	/* The area we are writing to has to contain all 0xFF bytes */
+	err = paranoid_check_all_ff(ubi, pnum, offset, len);
+	if (err)
+		return err > 0 ? -EINVAL : err;
+
+	if (offset >= ubi->leb_start) {
+		/*
+		 * We write to the data area of the physical eraseblock. Make
+		 * sure it has valid EC and VID headers.
+		 */
+		err = paranoid_check_peb_ec_hdr(ubi, pnum);
+		if (err)
+			return err > 0 ? -EINVAL : err;
+		err = paranoid_check_peb_vid_hdr(ubi, pnum);
+		if (err)
+			return err > 0 ? -EINVAL : err;
+	}
+
+	if (ubi_dbg_is_write_failure()) {
+		dbg_err("cannot write %d bytes to PEB %d:%d "
+			"(emulated)", len, pnum, offset);
+		ubi_dbg_dump_stack();
+		return -EIO;
+	}
+
+	addr = (loff_t)pnum * ubi->peb_size + offset;
+	err = ubi->mtd->write(ubi->mtd, addr, len, &written, buf);
+	if (err) {
+		ubi_err("error %d while writing %d bytes to PEB %d:%d, written"
+			" %zd bytes", err, len, pnum, offset, written);
+		ubi_dbg_dump_stack();
+	} else
+		ubi_assert(written == len);
+
+	return err;
+}
+
+/**
+ * erase_callback - MTD erasure call-back.
+ * @ei: MTD erase information object.
+ *
+ * Note, even though MTD erase interface is asynchronous, all the current
+ * implementations are synchronous anyway.
+ */
+static void erase_callback(struct erase_info *ei)
+{
+	wake_up_interruptible((wait_queue_head_t *)ei->priv);
+}
+
+/**
+ * do_sync_erase - synchronously erase a physical eraseblock.
+ * @ubi: UBI device description object
+ * @pnum: the physical eraseblock number to erase
+ *
+ * This function synchronously erases physical eraseblock @pnum and returns
+ * zero in case of success and a negative error code in case of failure. If
+ * %-EIO is returned, the physical eraseblock most probably went bad.
+ */
+static int do_sync_erase(struct ubi_device *ubi, int pnum)
+{
+	int err, retries = 0;
+	struct erase_info ei;
+	wait_queue_head_t wq;
+
+	dbg_io("erase PEB %d", pnum);
+
+retry:
+	init_waitqueue_head(&wq);
+	memset(&ei, 0, sizeof(struct erase_info));
+
+	ei.mtd      = ubi->mtd;
+	ei.addr     = (loff_t)pnum * ubi->peb_size;
+	ei.len      = ubi->peb_size;
+	ei.callback = erase_callback;
+	ei.priv     = (unsigned long)&wq;
+
+	err = ubi->mtd->erase(ubi->mtd, &ei);
+	if (err) {
+		if (retries++ < UBI_IO_RETRIES) {
+			dbg_io("error %d while erasing PEB %d, retry",
+			       err, pnum);
+			yield();
+			goto retry;
+		}
+		ubi_err("cannot erase PEB %d, error %d", pnum, err);
+		ubi_dbg_dump_stack();
+		return err;
+	}
+
+	err = wait_event_interruptible(wq, ei.state == MTD_ERASE_DONE ||
+					   ei.state == MTD_ERASE_FAILED);
+	if (err) {
+		ubi_err("interrupted PEB %d erasure", pnum);
+		return -EINTR;
+	}
+
+	if (ei.state == MTD_ERASE_FAILED) {
+		if (retries++ < UBI_IO_RETRIES) {
+			dbg_io("error while erasing PEB %d, retry", pnum);
+			yield();
+			goto retry;
+		}
+		ubi_err("cannot erase PEB %d", pnum);
+		ubi_dbg_dump_stack();
+		return -EIO;
+	}
+
+	err = paranoid_check_all_ff(ubi, pnum, 0, ubi->peb_size);
+	if (err)
+		return err > 0 ? -EINVAL : err;
+
+	if (ubi_dbg_is_erase_failure() && !err) {
+		dbg_err("cannot erase PEB %d (emulated)", pnum);
+		return -EIO;
+	}
+
+	return 0;
+}
+
+/**
+ * check_pattern - check if buffer contains only a certain byte pattern.
+ * @buf: buffer to check
+ * @patt: the pattern to check
+ * @size: buffer size in bytes
+ *
+ * This function returns %1 in there are only @patt bytes in @buf, and %0 if
+ * something else was also found.
+ */
+static int check_pattern(const void *buf, uint8_t patt, int size)
+{
+	int i;
+
+	for (i = 0; i < size; i++)
+		if (((const uint8_t *)buf)[i] != patt)
+			return 0;
+	return 1;
+}
+
+/* Patterns to write to a physical eraseblock when torturing it */
+static uint8_t patterns[] = {0xa5, 0x5a, 0x0};
+
+/**
+ * torture_peb - test a supposedly bad physical eraseblock.
+ * @ubi: UBI device description object
+ * @pnum: the physical eraseblock number to test
+ *
+ * This function returns %-EIO if the physical eraseblock did not pass the
+ * test, a positive number of erase operations done if the test was
+ * successfully passed, and other negative error codes in case of other errors.
+ */
+static int torture_peb(struct ubi_device *ubi, int pnum)
+{
+	int err, i, patt_count;
+
+	patt_count = ARRAY_SIZE(patterns);
+	ubi_assert(patt_count > 0);
+
+	mutex_lock(&ubi->buf_mutex);
+	for (i = 0; i < patt_count; i++) {
+		err = do_sync_erase(ubi, pnum);
+		if (err)
+			goto out;
+
+		/* Make sure the PEB contains only 0xFF bytes */
+		err = ubi_io_read(ubi, ubi->peb_buf1, pnum, 0, ubi->peb_size);
+		if (err)
+			goto out;
+
+		err = check_pattern(ubi->peb_buf1, 0xFF, ubi->peb_size);
+		if (err == 0) {
+			ubi_err("erased PEB %d, but a non-0xFF byte found",
+				pnum);
+			err = -EIO;
+			goto out;
+		}
+
+		/* Write a pattern and check it */
+		memset(ubi->peb_buf1, patterns[i], ubi->peb_size);
+		err = ubi_io_write(ubi, ubi->peb_buf1, pnum, 0, ubi->peb_size);
+		if (err)
+			goto out;
+
+		memset(ubi->peb_buf1, ~patterns[i], ubi->peb_size);
+		err = ubi_io_read(ubi, ubi->peb_buf1, pnum, 0, ubi->peb_size);
+		if (err)
+			goto out;
+
+		err = check_pattern(ubi->peb_buf1, patterns[i], ubi->peb_size);
+		if (err == 0) {
+			ubi_err("pattern %x checking failed for PEB %d",
+				patterns[i], pnum);
+			err = -EIO;
+			goto out;
+		}
+	}
+
+	err = patt_count;
+
+out:
+	mutex_unlock(&ubi->buf_mutex);
+	if (err == UBI_IO_BITFLIPS || err == -EBADMSG) {
+		/*
+		 * If a bit-flip or data integrity error was detected, the test
+		 * has not passed because it happened on a freshly erased
+		 * physical eraseblock which means something is wrong with it.
+		 */
+		ubi_err("read problems on freshly erased PEB %d, must be bad",
+			pnum);
+		err = -EIO;
+	}
+	return err;
+}
+
+/**
+ * ubi_io_sync_erase - synchronously erase a physical eraseblock.
+ * @ubi: UBI device description object
+ * @pnum: physical eraseblock number to erase
+ * @torture: if this physical eraseblock has to be tortured
+ *
+ * This function synchronously erases physical eraseblock @pnum. If @torture
+ * flag is not zero, the physical eraseblock is checked by means of writing
+ * different patterns to it and reading them back. If the torturing is enabled,
+ * the physical eraseblock is erased more then once.
+ *
+ * This function returns the number of erasures made in case of success, %-EIO
+ * if the erasure failed or the torturing test failed, and other negative error
+ * codes in case of other errors. Note, %-EIO means that the physical
+ * eraseblock is bad.
+ */
+int ubi_io_sync_erase(struct ubi_device *ubi, int pnum, int torture)
+{
+	int err, ret = 0;
+
+	ubi_assert(pnum >= 0 && pnum < ubi->peb_count);
+
+	err = paranoid_check_not_bad(ubi, pnum);
+	if (err != 0)
+		return err > 0 ? -EINVAL : err;
+
+	if (ubi->ro_mode) {
+		ubi_err("read-only mode");
+		return -EROFS;
+	}
+
+	if (torture) {
+		ret = torture_peb(ubi, pnum);
+		if (ret < 0)
+			return ret;
+	}
+
+	err = do_sync_erase(ubi, pnum);
+	if (err)
+		return err;
+
+	return ret + 1;
+}
+
+/**
+ * ubi_io_is_bad - check if a physical eraseblock is bad.
+ * @ubi: UBI device description object
+ * @pnum: the physical eraseblock number to check
+ *
+ * This function returns a positive number if the physical eraseblock is bad,
+ * zero if not, and a negative error code if an error occurred.
+ */
+int ubi_io_is_bad(const struct ubi_device *ubi, int pnum)
+{
+	struct mtd_info *mtd = ubi->mtd;
+
+	ubi_assert(pnum >= 0 && pnum < ubi->peb_count);
+
+	if (ubi->bad_allowed) {
+		int ret;
+
+		ret = mtd->block_isbad(mtd, (loff_t)pnum * ubi->peb_size);
+		if (ret < 0)
+			ubi_err("error %d while checking if PEB %d is bad",
+				ret, pnum);
+		else if (ret)
+			dbg_io("PEB %d is bad", pnum);
+		return ret;
+	}
+
+	return 0;
+}
+
+/**
+ * ubi_io_mark_bad - mark a physical eraseblock as bad.
+ * @ubi: UBI device description object
+ * @pnum: the physical eraseblock number to mark
+ *
+ * This function returns zero in case of success and a negative error code in
+ * case of failure.
+ */
+int ubi_io_mark_bad(const struct ubi_device *ubi, int pnum)
+{
+	int err;
+	struct mtd_info *mtd = ubi->mtd;
+
+	ubi_assert(pnum >= 0 && pnum < ubi->peb_count);
+
+	if (ubi->ro_mode) {
+		ubi_err("read-only mode");
+		return -EROFS;
+	}
+
+	if (!ubi->bad_allowed)
+		return 0;
+
+	err = mtd->block_markbad(mtd, (loff_t)pnum * ubi->peb_size);
+	if (err)
+		ubi_err("cannot mark PEB %d bad, error %d", pnum, err);
+	return err;
+}
+
+/**
+ * validate_ec_hdr - validate an erase counter header.
+ * @ubi: UBI device description object
+ * @ec_hdr: the erase counter header to check
+ *
+ * This function returns zero if the erase counter header is OK, and %1 if
+ * not.
+ */
+static int validate_ec_hdr(const struct ubi_device *ubi,
+			   const struct ubi_ec_hdr *ec_hdr)
+{
+	long long ec;
+	int vid_hdr_offset, leb_start;
+
+	ec = be64_to_cpu(ec_hdr->ec);
+	vid_hdr_offset = be32_to_cpu(ec_hdr->vid_hdr_offset);
+	leb_start = be32_to_cpu(ec_hdr->data_offset);
+
+	if (ec_hdr->version != UBI_VERSION) {
+		ubi_err("node with incompatible UBI version found: "
+			"this UBI version is %d, image version is %d",
+			UBI_VERSION, (int)ec_hdr->version);
+		goto bad;
+	}
+
+	if (vid_hdr_offset != ubi->vid_hdr_offset) {
+		ubi_err("bad VID header offset %d, expected %d",
+			vid_hdr_offset, ubi->vid_hdr_offset);
+		goto bad;
+	}
+
+	if (leb_start != ubi->leb_start) {
+		ubi_err("bad data offset %d, expected %d",
+			leb_start, ubi->leb_start);
+		goto bad;
+	}
+
+	if (ec < 0 || ec > UBI_MAX_ERASECOUNTER) {
+		ubi_err("bad erase counter %lld", ec);
+		goto bad;
+	}
+
+	return 0;
+
+bad:
+	ubi_err("bad EC header");
+	ubi_dbg_dump_ec_hdr(ec_hdr);
+	ubi_dbg_dump_stack();
+	return 1;
+}
+
+/**
+ * ubi_io_read_ec_hdr - read and check an erase counter header.
+ * @ubi: UBI device description object
+ * @pnum: physical eraseblock to read from
+ * @ec_hdr: a &struct ubi_ec_hdr object where to store the read erase counter
+ * header
+ * @verbose: be verbose if the header is corrupted or was not found
+ *
+ * This function reads erase counter header from physical eraseblock @pnum and
+ * stores it in @ec_hdr. This function also checks CRC checksum of the read
+ * erase counter header. The following codes may be returned:
+ *
+ * o %0 if the CRC checksum is correct and the header was successfully read;
+ * o %UBI_IO_BITFLIPS if the CRC is correct, but bit-flips were detected
+ *   and corrected by the flash driver; this is harmless but may indicate that
+ *   this eraseblock may become bad soon (but may be not);
+ * o %UBI_IO_BAD_EC_HDR if the erase counter header is corrupted (a CRC error);
+ * o %UBI_IO_PEB_EMPTY if the physical eraseblock is empty;
+ * o a negative error code in case of failure.
+ */
+int ubi_io_read_ec_hdr(struct ubi_device *ubi, int pnum,
+		       struct ubi_ec_hdr *ec_hdr, int verbose)
+{
+	int err, read_err = 0;
+	uint32_t crc, magic, hdr_crc;
+
+	dbg_io("read EC header from PEB %d", pnum);
+	ubi_assert(pnum >= 0 && pnum < ubi->peb_count);
+	if (UBI_IO_DEBUG)
+		verbose = 1;
+
+	err = ubi_io_read(ubi, ec_hdr, pnum, 0, UBI_EC_HDR_SIZE);
+	if (err) {
+		if (err != UBI_IO_BITFLIPS && err != -EBADMSG)
+			return err;
+
+		/*
+		 * We read all the data, but either a correctable bit-flip
+		 * occurred, or MTD reported about some data integrity error,
+		 * like an ECC error in case of NAND. The former is harmless,
+		 * the later may mean that the read data is corrupted. But we
+		 * have a CRC check-sum and we will detect this. If the EC
+		 * header is still OK, we just report this as there was a
+		 * bit-flip.
+		 */
+		read_err = err;
+	}
+
+	magic = be32_to_cpu(ec_hdr->magic);
+	if (magic != UBI_EC_HDR_MAGIC) {
+		/*
+		 * The magic field is wrong. Let's check if we have read all
+		 * 0xFF. If yes, this physical eraseblock is assumed to be
+		 * empty.
+		 *
+		 * But if there was a read error, we do not test it for all
+		 * 0xFFs. Even if it does contain all 0xFFs, this error
+		 * indicates that something is still wrong with this physical
+		 * eraseblock and we anyway cannot treat it as empty.
+		 */
+		if (read_err != -EBADMSG &&
+		    check_pattern(ec_hdr, 0xFF, UBI_EC_HDR_SIZE)) {
+			/* The physical eraseblock is supposedly empty */
+
+			/*
+			 * The below is just a paranoid check, it has to be
+			 * compiled out if paranoid checks are disabled.
+			 */
+			err = paranoid_check_all_ff(ubi, pnum, 0,
+						    ubi->peb_size);
+			if (err)
+				return err > 0 ? UBI_IO_BAD_EC_HDR : err;
+
+			if (verbose)
+				ubi_warn("no EC header found at PEB %d, "
+					 "only 0xFF bytes", pnum);
+			return UBI_IO_PEB_EMPTY;
+		}
+
+		/*
+		 * This is not a valid erase counter header, and these are not
+		 * 0xFF bytes. Report that the header is corrupted.
+		 */
+		if (verbose) {
+			ubi_warn("bad magic number at PEB %d: %08x instead of "
+				 "%08x", pnum, magic, UBI_EC_HDR_MAGIC);
+			ubi_dbg_dump_ec_hdr(ec_hdr);
+		}
+		return UBI_IO_BAD_EC_HDR;
+	}
+
+	crc = crc32(UBI_CRC32_INIT, ec_hdr, UBI_EC_HDR_SIZE_CRC);
+	hdr_crc = be32_to_cpu(ec_hdr->hdr_crc);
+
+	if (hdr_crc != crc) {
+		if (verbose) {
+			ubi_warn("bad EC header CRC at PEB %d, calculated %#08x,"
+				 " read %#08x", pnum, crc, hdr_crc);
+			ubi_dbg_dump_ec_hdr(ec_hdr);
+		}
+		return UBI_IO_BAD_EC_HDR;
+	}
+
+	/* And of course validate what has just been read from the media */
+	err = validate_ec_hdr(ubi, ec_hdr);
+	if (err) {
+		ubi_err("validation failed for PEB %d", pnum);
+		return -EINVAL;
+	}
+
+	return read_err ? UBI_IO_BITFLIPS : 0;
+}
+
+/**
+ * ubi_io_write_ec_hdr - write an erase counter header.
+ * @ubi: UBI device description object
+ * @pnum: physical eraseblock to write to
+ * @ec_hdr: the erase counter header to write
+ *
+ * This function writes erase counter header described by @ec_hdr to physical
+ * eraseblock @pnum. It also fills most fields of @ec_hdr before writing, so
+ * the caller do not have to fill them. Callers must only fill the @ec_hdr->ec
+ * field.
+ *
+ * This function returns zero in case of success and a negative error code in
+ * case of failure. If %-EIO is returned, the physical eraseblock most probably
+ * went bad.
+ */
+int ubi_io_write_ec_hdr(struct ubi_device *ubi, int pnum,
+			struct ubi_ec_hdr *ec_hdr)
+{
+	int err;
+	uint32_t crc;
+
+	dbg_io("write EC header to PEB %d", pnum);
+	ubi_assert(pnum >= 0 &&  pnum < ubi->peb_count);
+
+	ec_hdr->magic = cpu_to_be32(UBI_EC_HDR_MAGIC);
+	ec_hdr->version = UBI_VERSION;
+	ec_hdr->vid_hdr_offset = cpu_to_be32(ubi->vid_hdr_offset);
+	ec_hdr->data_offset = cpu_to_be32(ubi->leb_start);
+	crc = crc32(UBI_CRC32_INIT, ec_hdr, UBI_EC_HDR_SIZE_CRC);
+	ec_hdr->hdr_crc = cpu_to_be32(crc);
+
+	err = paranoid_check_ec_hdr(ubi, pnum, ec_hdr);
+	if (err)
+		return -EINVAL;
+
+	err = ubi_io_write(ubi, ec_hdr, pnum, 0, ubi->ec_hdr_alsize);
+	return err;
+}
+
+/**
+ * validate_vid_hdr - validate a volume identifier header.
+ * @ubi: UBI device description object
+ * @vid_hdr: the volume identifier header to check
+ *
+ * This function checks that data stored in the volume identifier header
+ * @vid_hdr. Returns zero if the VID header is OK and %1 if not.
+ */
+static int validate_vid_hdr(const struct ubi_device *ubi,
+			    const struct ubi_vid_hdr *vid_hdr)
+{
+	int vol_type = vid_hdr->vol_type;
+	int copy_flag = vid_hdr->copy_flag;
+	int vol_id = be32_to_cpu(vid_hdr->vol_id);
+	int lnum = be32_to_cpu(vid_hdr->lnum);
+	int compat = vid_hdr->compat;
+	int data_size = be32_to_cpu(vid_hdr->data_size);
+	int used_ebs = be32_to_cpu(vid_hdr->used_ebs);
+	int data_pad = be32_to_cpu(vid_hdr->data_pad);
+	int data_crc = be32_to_cpu(vid_hdr->data_crc);
+	int usable_leb_size = ubi->leb_size - data_pad;
+
+	if (copy_flag != 0 && copy_flag != 1) {
+		dbg_err("bad copy_flag");
+		goto bad;
+	}
+
+	if (vol_id < 0 || lnum < 0 || data_size < 0 || used_ebs < 0 ||
+	    data_pad < 0) {
+		dbg_err("negative values");
+		goto bad;
+	}
+
+	if (vol_id >= UBI_MAX_VOLUMES && vol_id < UBI_INTERNAL_VOL_START) {
+		dbg_err("bad vol_id");
+		goto bad;
+	}
+
+	if (vol_id < UBI_INTERNAL_VOL_START && compat != 0) {
+		dbg_err("bad compat");
+		goto bad;
+	}
+
+	if (vol_id >= UBI_INTERNAL_VOL_START && compat != UBI_COMPAT_DELETE &&
+	    compat != UBI_COMPAT_RO && compat != UBI_COMPAT_PRESERVE &&
+	    compat != UBI_COMPAT_REJECT) {
+		dbg_err("bad compat");
+		goto bad;
+	}
+
+	if (vol_type != UBI_VID_DYNAMIC && vol_type != UBI_VID_STATIC) {
+		dbg_err("bad vol_type");
+		goto bad;
+	}
+
+	if (data_pad >= ubi->leb_size / 2) {
+		dbg_err("bad data_pad");
+		goto bad;
+	}
+
+	if (vol_type == UBI_VID_STATIC) {
+		/*
+		 * Although from high-level point of view static volumes may
+		 * contain zero bytes of data, but no VID headers can contain
+		 * zero at these fields, because they empty volumes do not have
+		 * mapped logical eraseblocks.
+		 */
+		if (used_ebs == 0) {
+			dbg_err("zero used_ebs");
+			goto bad;
+		}
+		if (data_size == 0) {
+			dbg_err("zero data_size");
+			goto bad;
+		}
+		if (lnum < used_ebs - 1) {
+			if (data_size != usable_leb_size) {
+				dbg_err("bad data_size");
+				goto bad;
+			}
+		} else if (lnum == used_ebs - 1) {
+			if (data_size == 0) {
+				dbg_err("bad data_size at last LEB");
+				goto bad;
+			}
+		} else {
+			dbg_err("too high lnum");
+			goto bad;
+		}
+	} else {
+		if (copy_flag == 0) {
+			if (data_crc != 0) {
+				dbg_err("non-zero data CRC");
+				goto bad;
+			}
+			if (data_size != 0) {
+				dbg_err("non-zero data_size");
+				goto bad;
+			}
+		} else {
+			if (data_size == 0) {
+				dbg_err("zero data_size of copy");
+				goto bad;
+			}
+		}
+		if (used_ebs != 0) {
+			dbg_err("bad used_ebs");
+			goto bad;
+		}
+	}
+
+	return 0;
+
+bad:
+	ubi_err("bad VID header");
+	ubi_dbg_dump_vid_hdr(vid_hdr);
+	ubi_dbg_dump_stack();
+	return 1;
+}
+
+/**
+ * ubi_io_read_vid_hdr - read and check a volume identifier header.
+ * @ubi: UBI device description object
+ * @pnum: physical eraseblock number to read from
+ * @vid_hdr: &struct ubi_vid_hdr object where to store the read volume
+ * identifier header
+ * @verbose: be verbose if the header is corrupted or wasn't found
+ *
+ * This function reads the volume identifier header from physical eraseblock
+ * @pnum and stores it in @vid_hdr. It also checks CRC checksum of the read
+ * volume identifier header. The following codes may be returned:
+ *
+ * o %0 if the CRC checksum is correct and the header was successfully read;
+ * o %UBI_IO_BITFLIPS if the CRC is correct, but bit-flips were detected
+ *   and corrected by the flash driver; this is harmless but may indicate that
+ *   this eraseblock may become bad soon;
+ * o %UBI_IO_BAD_VID_HRD if the volume identifier header is corrupted (a CRC
+ *   error detected);
+ * o %UBI_IO_PEB_FREE if the physical eraseblock is free (i.e., there is no VID
+ *   header there);
+ * o a negative error code in case of failure.
+ */
+int ubi_io_read_vid_hdr(struct ubi_device *ubi, int pnum,
+			struct ubi_vid_hdr *vid_hdr, int verbose)
+{
+	int err, read_err = 0;
+	uint32_t crc, magic, hdr_crc;
+	void *p;
+
+	dbg_io("read VID header from PEB %d", pnum);
+	ubi_assert(pnum >= 0 &&  pnum < ubi->peb_count);
+	if (UBI_IO_DEBUG)
+		verbose = 1;
+
+	p = (char *)vid_hdr - ubi->vid_hdr_shift;
+	err = ubi_io_read(ubi, p, pnum, ubi->vid_hdr_aloffset,
+			  ubi->vid_hdr_alsize);
+	if (err) {
+		if (err != UBI_IO_BITFLIPS && err != -EBADMSG)
+			return err;
+
+		/*
+		 * We read all the data, but either a correctable bit-flip
+		 * occurred, or MTD reported about some data integrity error,
+		 * like an ECC error in case of NAND. The former is harmless,
+		 * the later may mean the read data is corrupted. But we have a
+		 * CRC check-sum and we will identify this. If the VID header is
+		 * still OK, we just report this as there was a bit-flip.
+		 */
+		read_err = err;
+	}
+
+	magic = be32_to_cpu(vid_hdr->magic);
+	if (magic != UBI_VID_HDR_MAGIC) {
+		/*
+		 * If we have read all 0xFF bytes, the VID header probably does
+		 * not exist and the physical eraseblock is assumed to be free.
+		 *
+		 * But if there was a read error, we do not test the data for
+		 * 0xFFs. Even if it does contain all 0xFFs, this error
+		 * indicates that something is still wrong with this physical
+		 * eraseblock and it cannot be regarded as free.
+		 */
+		if (read_err != -EBADMSG &&
+		    check_pattern(vid_hdr, 0xFF, UBI_VID_HDR_SIZE)) {
+			/* The physical eraseblock is supposedly free */
+
+			/*
+			 * The below is just a paranoid check, it has to be
+			 * compiled out if paranoid checks are disabled.
+			 */
+			err = paranoid_check_all_ff(ubi, pnum, ubi->leb_start,
+						    ubi->leb_size);
+			if (err)
+				return err > 0 ? UBI_IO_BAD_VID_HDR : err;
+
+			if (verbose)
+				ubi_warn("no VID header found at PEB %d, "
+					 "only 0xFF bytes", pnum);
+			return UBI_IO_PEB_FREE;
+		}
+
+		/*
+		 * This is not a valid VID header, and these are not 0xFF
+		 * bytes. Report that the header is corrupted.
+		 */
+		if (verbose) {
+			ubi_warn("bad magic number at PEB %d: %08x instead of "
+				 "%08x", pnum, magic, UBI_VID_HDR_MAGIC);
+			ubi_dbg_dump_vid_hdr(vid_hdr);
+		}
+		return UBI_IO_BAD_VID_HDR;
+	}
+
+	crc = crc32(UBI_CRC32_INIT, vid_hdr, UBI_VID_HDR_SIZE_CRC);
+	hdr_crc = be32_to_cpu(vid_hdr->hdr_crc);
+
+	if (hdr_crc != crc) {
+		if (verbose) {
+			ubi_warn("bad CRC at PEB %d, calculated %#08x, "
+				 "read %#08x", pnum, crc, hdr_crc);
+			ubi_dbg_dump_vid_hdr(vid_hdr);
+		}
+		return UBI_IO_BAD_VID_HDR;
+	}
+
+	/* Validate the VID header that we have just read */
+	err = validate_vid_hdr(ubi, vid_hdr);
+	if (err) {
+		ubi_err("validation failed for PEB %d", pnum);
+		return -EINVAL;
+	}
+
+	return read_err ? UBI_IO_BITFLIPS : 0;
+}
+
+/**
+ * ubi_io_write_vid_hdr - write a volume identifier header.
+ * @ubi: UBI device description object
+ * @pnum: the physical eraseblock number to write to
+ * @vid_hdr: the volume identifier header to write
+ *
+ * This function writes the volume identifier header described by @vid_hdr to
+ * physical eraseblock @pnum. This function automatically fills the
+ * @vid_hdr->magic and the @vid_hdr->version fields, as well as calculates
+ * header CRC checksum and stores it at vid_hdr->hdr_crc.
+ *
+ * This function returns zero in case of success and a negative error code in
+ * case of failure. If %-EIO is returned, the physical eraseblock probably went
+ * bad.
+ */
+int ubi_io_write_vid_hdr(struct ubi_device *ubi, int pnum,
+			 struct ubi_vid_hdr *vid_hdr)
+{
+	int err;
+	uint32_t crc;
+	void *p;
+
+	dbg_io("write VID header to PEB %d", pnum);
+	ubi_assert(pnum >= 0 &&  pnum < ubi->peb_count);
+
+	err = paranoid_check_peb_ec_hdr(ubi, pnum);
+	if (err)
+		return err > 0 ? -EINVAL: err;
+
+	vid_hdr->magic = cpu_to_be32(UBI_VID_HDR_MAGIC);
+	vid_hdr->version = UBI_VERSION;
+	crc = crc32(UBI_CRC32_INIT, vid_hdr, UBI_VID_HDR_SIZE_CRC);
+	vid_hdr->hdr_crc = cpu_to_be32(crc);
+
+	err = paranoid_check_vid_hdr(ubi, pnum, vid_hdr);
+	if (err)
+		return -EINVAL;
+
+	p = (char *)vid_hdr - ubi->vid_hdr_shift;
+	err = ubi_io_write(ubi, p, pnum, ubi->vid_hdr_aloffset,
+			   ubi->vid_hdr_alsize);
+	return err;
+}
+
+#ifdef CONFIG_MTD_UBI_DEBUG_PARANOID
+
+/**
+ * paranoid_check_not_bad - ensure that a physical eraseblock is not bad.
+ * @ubi: UBI device description object
+ * @pnum: physical eraseblock number to check
+ *
+ * This function returns zero if the physical eraseblock is good, a positive
+ * number if it is bad and a negative error code if an error occurred.
+ */
+static int paranoid_check_not_bad(const struct ubi_device *ubi, int pnum)
+{
+	int err;
+
+	err = ubi_io_is_bad(ubi, pnum);
+	if (!err)
+		return err;
+
+	ubi_err("paranoid check failed for PEB %d", pnum);
+	ubi_dbg_dump_stack();
+	return err;
+}
+
+/**
+ * paranoid_check_ec_hdr - check if an erase counter header is all right.
+ * @ubi: UBI device description object
+ * @pnum: physical eraseblock number the erase counter header belongs to
+ * @ec_hdr: the erase counter header to check
+ *
+ * This function returns zero if the erase counter header contains valid
+ * values, and %1 if not.
+ */
+static int paranoid_check_ec_hdr(const struct ubi_device *ubi, int pnum,
+				 const struct ubi_ec_hdr *ec_hdr)
+{
+	int err;
+	uint32_t magic;
+
+	magic = be32_to_cpu(ec_hdr->magic);
+	if (magic != UBI_EC_HDR_MAGIC) {
+		ubi_err("bad magic %#08x, must be %#08x",
+			magic, UBI_EC_HDR_MAGIC);
+		goto fail;
+	}
+
+	err = validate_ec_hdr(ubi, ec_hdr);
+	if (err) {
+		ubi_err("paranoid check failed for PEB %d", pnum);
+		goto fail;
+	}
+
+	return 0;
+
+fail:
+	ubi_dbg_dump_ec_hdr(ec_hdr);
+	ubi_dbg_dump_stack();
+	return 1;
+}
+
+/**
+ * paranoid_check_peb_ec_hdr - check that the erase counter header of a
+ * physical eraseblock is in-place and is all right.
+ * @ubi: UBI device description object
+ * @pnum: the physical eraseblock number to check
+ *
+ * This function returns zero if the erase counter header is all right, %1 if
+ * not, and a negative error code if an error occurred.
+ */
+static int paranoid_check_peb_ec_hdr(const struct ubi_device *ubi, int pnum)
+{
+	int err;
+	uint32_t crc, hdr_crc;
+	struct ubi_ec_hdr *ec_hdr;
+
+	ec_hdr = kzalloc(ubi->ec_hdr_alsize, GFP_NOFS);
+	if (!ec_hdr)
+		return -ENOMEM;
+
+	err = ubi_io_read(ubi, ec_hdr, pnum, 0, UBI_EC_HDR_SIZE);
+	if (err && err != UBI_IO_BITFLIPS && err != -EBADMSG)
+		goto exit;
+
+	crc = crc32(UBI_CRC32_INIT, ec_hdr, UBI_EC_HDR_SIZE_CRC);
+	hdr_crc = be32_to_cpu(ec_hdr->hdr_crc);
+	if (hdr_crc != crc) {
+		ubi_err("bad CRC, calculated %#08x, read %#08x", crc, hdr_crc);
+		ubi_err("paranoid check failed for PEB %d", pnum);
+		ubi_dbg_dump_ec_hdr(ec_hdr);
+		ubi_dbg_dump_stack();
+		err = 1;
+		goto exit;
+	}
+
+	err = paranoid_check_ec_hdr(ubi, pnum, ec_hdr);
+
+exit:
+	kfree(ec_hdr);
+	return err;
+}
+
+/**
+ * paranoid_check_vid_hdr - check that a volume identifier header is all right.
+ * @ubi: UBI device description object
+ * @pnum: physical eraseblock number the volume identifier header belongs to
+ * @vid_hdr: the volume identifier header to check
+ *
+ * This function returns zero if the volume identifier header is all right, and
+ * %1 if not.
+ */
+static int paranoid_check_vid_hdr(const struct ubi_device *ubi, int pnum,
+				  const struct ubi_vid_hdr *vid_hdr)
+{
+	int err;
+	uint32_t magic;
+
+	magic = be32_to_cpu(vid_hdr->magic);
+	if (magic != UBI_VID_HDR_MAGIC) {
+		ubi_err("bad VID header magic %#08x at PEB %d, must be %#08x",
+			magic, pnum, UBI_VID_HDR_MAGIC);
+		goto fail;
+	}
+
+	err = validate_vid_hdr(ubi, vid_hdr);
+	if (err) {
+		ubi_err("paranoid check failed for PEB %d", pnum);
+		goto fail;
+	}
+
+	return err;
+
+fail:
+	ubi_err("paranoid check failed for PEB %d", pnum);
+	ubi_dbg_dump_vid_hdr(vid_hdr);
+	ubi_dbg_dump_stack();
+	return 1;
+
+}
+
+/**
+ * paranoid_check_peb_vid_hdr - check that the volume identifier header of a
+ * physical eraseblock is in-place and is all right.
+ * @ubi: UBI device description object
+ * @pnum: the physical eraseblock number to check
+ *
+ * This function returns zero if the volume identifier header is all right,
+ * %1 if not, and a negative error code if an error occurred.
+ */
+static int paranoid_check_peb_vid_hdr(const struct ubi_device *ubi, int pnum)
+{
+	int err;
+	uint32_t crc, hdr_crc;
+	struct ubi_vid_hdr *vid_hdr;
+	void *p;
+
+	vid_hdr = ubi_zalloc_vid_hdr(ubi, GFP_NOFS);
+	if (!vid_hdr)
+		return -ENOMEM;
+
+	p = (char *)vid_hdr - ubi->vid_hdr_shift;
+	err = ubi_io_read(ubi, p, pnum, ubi->vid_hdr_aloffset,
+			  ubi->vid_hdr_alsize);
+	if (err && err != UBI_IO_BITFLIPS && err != -EBADMSG)
+		goto exit;
+
+	crc = crc32(UBI_CRC32_INIT, vid_hdr, UBI_EC_HDR_SIZE_CRC);
+	hdr_crc = be32_to_cpu(vid_hdr->hdr_crc);
+	if (hdr_crc != crc) {
+		ubi_err("bad VID header CRC at PEB %d, calculated %#08x, "
+			"read %#08x", pnum, crc, hdr_crc);
+		ubi_err("paranoid check failed for PEB %d", pnum);
+		ubi_dbg_dump_vid_hdr(vid_hdr);
+		ubi_dbg_dump_stack();
+		err = 1;
+		goto exit;
+	}
+
+	err = paranoid_check_vid_hdr(ubi, pnum, vid_hdr);
+
+exit:
+	ubi_free_vid_hdr(ubi, vid_hdr);
+	return err;
+}
+
+/**
+ * paranoid_check_all_ff - check that a region of flash is empty.
+ * @ubi: UBI device description object
+ * @pnum: the physical eraseblock number to check
+ * @offset: the starting offset within the physical eraseblock to check
+ * @len: the length of the region to check
+ *
+ * This function returns zero if only 0xFF bytes are present at offset
+ * @offset of the physical eraseblock @pnum, %1 if not, and a negative error
+ * code if an error occurred.
+ */
+static int paranoid_check_all_ff(struct ubi_device *ubi, int pnum, int offset,
+				 int len)
+{
+	size_t read;
+	int err;
+	loff_t addr = (loff_t)pnum * ubi->peb_size + offset;
+
+	mutex_lock(&ubi->dbg_buf_mutex);
+	err = ubi->mtd->read(ubi->mtd, addr, len, &read, ubi->dbg_peb_buf);
+	if (err && err != -EUCLEAN) {
+		ubi_err("error %d while reading %d bytes from PEB %d:%d, "
+			"read %zd bytes", err, len, pnum, offset, read);
+		goto error;
+	}
+
+	err = check_pattern(ubi->dbg_peb_buf, 0xFF, len);
+	if (err == 0) {
+		ubi_err("flash region at PEB %d:%d, length %d does not "
+			"contain all 0xFF bytes", pnum, offset, len);
+		goto fail;
+	}
+	mutex_unlock(&ubi->dbg_buf_mutex);
+
+	return 0;
+
+fail:
+	ubi_err("paranoid check failed for PEB %d", pnum);
+	dbg_msg("hex dump of the %d-%d region", offset, offset + len);
+	print_hex_dump(KERN_DEBUG, "", DUMP_PREFIX_OFFSET, 32, 1,
+		       ubi->dbg_peb_buf, len, 1);
+	err = 1;
+error:
+	ubi_dbg_dump_stack();
+	mutex_unlock(&ubi->dbg_buf_mutex);
+	return err;
+}
+
+#endif /* CONFIG_MTD_UBI_DEBUG_PARANOID */
diff --git a/drivers/mtd/ubi/kapi.c b/drivers/mtd/ubi/kapi.c
new file mode 100644
index 000000000..423d47915
--- /dev/null
+++ b/drivers/mtd/ubi/kapi.c
@@ -0,0 +1,638 @@
+/*
+ * Copyright (c) International Business Machines Corp., 2006
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ * Author: Artem Bityutskiy (Битюцкий �ртём)
+ */
+
+/* This file mostly implements UBI kernel API functions */
+
+#ifdef UBI_LINUX
+#include <linux/module.h>
+#include <linux/err.h>
+#include <asm/div64.h>
+#endif
+
+#include <ubi_uboot.h>
+#include "ubi.h"
+
+/**
+ * ubi_get_device_info - get information about UBI device.
+ * @ubi_num: UBI device number
+ * @di: the information is stored here
+ *
+ * This function returns %0 in case of success, %-EINVAL if the UBI device
+ * number is invalid, and %-ENODEV if there is no such UBI device.
+ */
+int ubi_get_device_info(int ubi_num, struct ubi_device_info *di)
+{
+	struct ubi_device *ubi;
+
+	if (ubi_num < 0 || ubi_num >= UBI_MAX_DEVICES)
+		return -EINVAL;
+
+	ubi = ubi_get_device(ubi_num);
+	if (!ubi)
+		return -ENODEV;
+
+	di->ubi_num = ubi->ubi_num;
+	di->leb_size = ubi->leb_size;
+	di->min_io_size = ubi->min_io_size;
+	di->ro_mode = ubi->ro_mode;
+	di->cdev = ubi->cdev.dev;
+
+	ubi_put_device(ubi);
+	return 0;
+}
+EXPORT_SYMBOL_GPL(ubi_get_device_info);
+
+/**
+ * ubi_get_volume_info - get information about UBI volume.
+ * @desc: volume descriptor
+ * @vi: the information is stored here
+ */
+void ubi_get_volume_info(struct ubi_volume_desc *desc,
+			 struct ubi_volume_info *vi)
+{
+	const struct ubi_volume *vol = desc->vol;
+	const struct ubi_device *ubi = vol->ubi;
+
+	vi->vol_id = vol->vol_id;
+	vi->ubi_num = ubi->ubi_num;
+	vi->size = vol->reserved_pebs;
+	vi->used_bytes = vol->used_bytes;
+	vi->vol_type = vol->vol_type;
+	vi->corrupted = vol->corrupted;
+	vi->upd_marker = vol->upd_marker;
+	vi->alignment = vol->alignment;
+	vi->usable_leb_size = vol->usable_leb_size;
+	vi->name_len = vol->name_len;
+	vi->name = vol->name;
+	vi->cdev = vol->cdev.dev;
+}
+EXPORT_SYMBOL_GPL(ubi_get_volume_info);
+
+/**
+ * ubi_open_volume - open UBI volume.
+ * @ubi_num: UBI device number
+ * @vol_id: volume ID
+ * @mode: open mode
+ *
+ * The @mode parameter specifies if the volume should be opened in read-only
+ * mode, read-write mode, or exclusive mode. The exclusive mode guarantees that
+ * nobody else will be able to open this volume. UBI allows to have many volume
+ * readers and one writer at a time.
+ *
+ * If a static volume is being opened for the first time since boot, it will be
+ * checked by this function, which means it will be fully read and the CRC
+ * checksum of each logical eraseblock will be checked.
+ *
+ * This function returns volume descriptor in case of success and a negative
+ * error code in case of failure.
+ */
+struct ubi_volume_desc *ubi_open_volume(int ubi_num, int vol_id, int mode)
+{
+	int err;
+	struct ubi_volume_desc *desc;
+	struct ubi_device *ubi;
+	struct ubi_volume *vol;
+
+	dbg_msg("open device %d volume %d, mode %d", ubi_num, vol_id, mode);
+
+	if (ubi_num < 0 || ubi_num >= UBI_MAX_DEVICES)
+		return ERR_PTR(-EINVAL);
+
+	if (mode != UBI_READONLY && mode != UBI_READWRITE &&
+	    mode != UBI_EXCLUSIVE)
+		return ERR_PTR(-EINVAL);
+
+	/*
+	 * First of all, we have to get the UBI device to prevent its removal.
+	 */
+	ubi = ubi_get_device(ubi_num);
+	if (!ubi)
+		return ERR_PTR(-ENODEV);
+
+	if (vol_id < 0 || vol_id >= ubi->vtbl_slots) {
+		err = -EINVAL;
+		goto out_put_ubi;
+	}
+
+	desc = kmalloc(sizeof(struct ubi_volume_desc), GFP_KERNEL);
+	if (!desc) {
+		err = -ENOMEM;
+		goto out_put_ubi;
+	}
+
+	err = -ENODEV;
+	if (!try_module_get(THIS_MODULE))
+		goto out_free;
+
+	spin_lock(&ubi->volumes_lock);
+	vol = ubi->volumes[vol_id];
+	if (!vol)
+		goto out_unlock;
+
+	err = -EBUSY;
+	switch (mode) {
+	case UBI_READONLY:
+		if (vol->exclusive)
+			goto out_unlock;
+		vol->readers += 1;
+		break;
+
+	case UBI_READWRITE:
+		if (vol->exclusive || vol->writers > 0)
+			goto out_unlock;
+		vol->writers += 1;
+		break;
+
+	case UBI_EXCLUSIVE:
+		if (vol->exclusive || vol->writers || vol->readers)
+			goto out_unlock;
+		vol->exclusive = 1;
+		break;
+	}
+	get_device(&vol->dev);
+	vol->ref_count += 1;
+	spin_unlock(&ubi->volumes_lock);
+
+	desc->vol = vol;
+	desc->mode = mode;
+
+	mutex_lock(&ubi->ckvol_mutex);
+	if (!vol->checked) {
+		/* This is the first open - check the volume */
+		err = ubi_check_volume(ubi, vol_id);
+		if (err < 0) {
+			mutex_unlock(&ubi->ckvol_mutex);
+			ubi_close_volume(desc);
+			return ERR_PTR(err);
+		}
+		if (err == 1) {
+			ubi_warn("volume %d on UBI device %d is corrupted",
+				 vol_id, ubi->ubi_num);
+			vol->corrupted = 1;
+		}
+		vol->checked = 1;
+	}
+	mutex_unlock(&ubi->ckvol_mutex);
+
+	return desc;
+
+out_unlock:
+	spin_unlock(&ubi->volumes_lock);
+	module_put(THIS_MODULE);
+out_free:
+	kfree(desc);
+out_put_ubi:
+	ubi_put_device(ubi);
+	return ERR_PTR(err);
+}
+EXPORT_SYMBOL_GPL(ubi_open_volume);
+
+/**
+ * ubi_open_volume_nm - open UBI volume by name.
+ * @ubi_num: UBI device number
+ * @name: volume name
+ * @mode: open mode
+ *
+ * This function is similar to 'ubi_open_volume()', but opens a volume by name.
+ */
+struct ubi_volume_desc *ubi_open_volume_nm(int ubi_num, const char *name,
+					   int mode)
+{
+	int i, vol_id = -1, len;
+	struct ubi_device *ubi;
+	struct ubi_volume_desc *ret;
+
+	dbg_msg("open volume %s, mode %d", name, mode);
+
+	if (!name)
+		return ERR_PTR(-EINVAL);
+
+	len = strnlen(name, UBI_VOL_NAME_MAX + 1);
+	if (len > UBI_VOL_NAME_MAX)
+		return ERR_PTR(-EINVAL);
+
+	if (ubi_num < 0 || ubi_num >= UBI_MAX_DEVICES)
+		return ERR_PTR(-EINVAL);
+
+	ubi = ubi_get_device(ubi_num);
+	if (!ubi)
+		return ERR_PTR(-ENODEV);
+
+	spin_lock(&ubi->volumes_lock);
+	/* Walk all volumes of this UBI device */
+	for (i = 0; i < ubi->vtbl_slots; i++) {
+		struct ubi_volume *vol = ubi->volumes[i];
+
+		if (vol && len == vol->name_len && !strcmp(name, vol->name)) {
+			vol_id = i;
+			break;
+		}
+	}
+	spin_unlock(&ubi->volumes_lock);
+
+	if (vol_id >= 0)
+		ret = ubi_open_volume(ubi_num, vol_id, mode);
+	else
+		ret = ERR_PTR(-ENODEV);
+
+	/*
+	 * We should put the UBI device even in case of success, because
+	 * 'ubi_open_volume()' took a reference as well.
+	 */
+	ubi_put_device(ubi);
+	return ret;
+}
+EXPORT_SYMBOL_GPL(ubi_open_volume_nm);
+
+/**
+ * ubi_close_volume - close UBI volume.
+ * @desc: volume descriptor
+ */
+void ubi_close_volume(struct ubi_volume_desc *desc)
+{
+	struct ubi_volume *vol = desc->vol;
+	struct ubi_device *ubi = vol->ubi;
+
+	dbg_msg("close volume %d, mode %d", vol->vol_id, desc->mode);
+
+	spin_lock(&ubi->volumes_lock);
+	switch (desc->mode) {
+	case UBI_READONLY:
+		vol->readers -= 1;
+		break;
+	case UBI_READWRITE:
+		vol->writers -= 1;
+		break;
+	case UBI_EXCLUSIVE:
+		vol->exclusive = 0;
+	}
+	vol->ref_count -= 1;
+	spin_unlock(&ubi->volumes_lock);
+
+	kfree(desc);
+	put_device(&vol->dev);
+	ubi_put_device(ubi);
+	module_put(THIS_MODULE);
+}
+EXPORT_SYMBOL_GPL(ubi_close_volume);
+
+/**
+ * ubi_leb_read - read data.
+ * @desc: volume descriptor
+ * @lnum: logical eraseblock number to read from
+ * @buf: buffer where to store the read data
+ * @offset: offset within the logical eraseblock to read from
+ * @len: how many bytes to read
+ * @check: whether UBI has to check the read data's CRC or not.
+ *
+ * This function reads data from offset @offset of logical eraseblock @lnum and
+ * stores the data at @buf. When reading from static volumes, @check specifies
+ * whether the data has to be checked or not. If yes, the whole logical
+ * eraseblock will be read and its CRC checksum will be checked (i.e., the CRC
+ * checksum is per-eraseblock). So checking may substantially slow down the
+ * read speed. The @check argument is ignored for dynamic volumes.
+ *
+ * In case of success, this function returns zero. In case of failure, this
+ * function returns a negative error code.
+ *
+ * %-EBADMSG error code is returned:
+ * o for both static and dynamic volumes if MTD driver has detected a data
+ *   integrity problem (unrecoverable ECC checksum mismatch in case of NAND);
+ * o for static volumes in case of data CRC mismatch.
+ *
+ * If the volume is damaged because of an interrupted update this function just
+ * returns immediately with %-EBADF error code.
+ */
+int ubi_leb_read(struct ubi_volume_desc *desc, int lnum, char *buf, int offset,
+		 int len, int check)
+{
+	struct ubi_volume *vol = desc->vol;
+	struct ubi_device *ubi = vol->ubi;
+	int err, vol_id = vol->vol_id;
+
+	dbg_msg("read %d bytes from LEB %d:%d:%d", len, vol_id, lnum, offset);
+
+	if (vol_id < 0 || vol_id >= ubi->vtbl_slots || lnum < 0 ||
+	    lnum >= vol->used_ebs || offset < 0 || len < 0 ||
+	    offset + len > vol->usable_leb_size)
+		return -EINVAL;
+
+	if (vol->vol_type == UBI_STATIC_VOLUME) {
+		if (vol->used_ebs == 0)
+			/* Empty static UBI volume */
+			return 0;
+		if (lnum == vol->used_ebs - 1 &&
+		    offset + len > vol->last_eb_bytes)
+			return -EINVAL;
+	}
+
+	if (vol->upd_marker)
+		return -EBADF;
+	if (len == 0)
+		return 0;
+
+	err = ubi_eba_read_leb(ubi, vol, lnum, buf, offset, len, check);
+	if (err && err == -EBADMSG && vol->vol_type == UBI_STATIC_VOLUME) {
+		ubi_warn("mark volume %d as corrupted", vol_id);
+		vol->corrupted = 1;
+	}
+
+	return err;
+}
+EXPORT_SYMBOL_GPL(ubi_leb_read);
+
+/**
+ * ubi_leb_write - write data.
+ * @desc: volume descriptor
+ * @lnum: logical eraseblock number to write to
+ * @buf: data to write
+ * @offset: offset within the logical eraseblock where to write
+ * @len: how many bytes to write
+ * @dtype: expected data type
+ *
+ * This function writes @len bytes of data from @buf to offset @offset of
+ * logical eraseblock @lnum. The @dtype argument describes expected lifetime of
+ * the data.
+ *
+ * This function takes care of physical eraseblock write failures. If write to
+ * the physical eraseblock write operation fails, the logical eraseblock is
+ * re-mapped to another physical eraseblock, the data is recovered, and the
+ * write finishes. UBI has a pool of reserved physical eraseblocks for this.
+ *
+ * If all the data were successfully written, zero is returned. If an error
+ * occurred and UBI has not been able to recover from it, this function returns
+ * a negative error code. Note, in case of an error, it is possible that
+ * something was still written to the flash media, but that may be some
+ * garbage.
+ *
+ * If the volume is damaged because of an interrupted update this function just
+ * returns immediately with %-EBADF code.
+ */
+int ubi_leb_write(struct ubi_volume_desc *desc, int lnum, const void *buf,
+		  int offset, int len, int dtype)
+{
+	struct ubi_volume *vol = desc->vol;
+	struct ubi_device *ubi = vol->ubi;
+	int vol_id = vol->vol_id;
+
+	dbg_msg("write %d bytes to LEB %d:%d:%d", len, vol_id, lnum, offset);
+
+	if (vol_id < 0 || vol_id >= ubi->vtbl_slots)
+		return -EINVAL;
+
+	if (desc->mode == UBI_READONLY || vol->vol_type == UBI_STATIC_VOLUME)
+		return -EROFS;
+
+	if (lnum < 0 || lnum >= vol->reserved_pebs || offset < 0 || len < 0 ||
+	    offset + len > vol->usable_leb_size ||
+	    offset & (ubi->min_io_size - 1) || len & (ubi->min_io_size - 1))
+		return -EINVAL;
+
+	if (dtype != UBI_LONGTERM && dtype != UBI_SHORTTERM &&
+	    dtype != UBI_UNKNOWN)
+		return -EINVAL;
+
+	if (vol->upd_marker)
+		return -EBADF;
+
+	if (len == 0)
+		return 0;
+
+	return ubi_eba_write_leb(ubi, vol, lnum, buf, offset, len, dtype);
+}
+EXPORT_SYMBOL_GPL(ubi_leb_write);
+
+/*
+ * ubi_leb_change - change logical eraseblock atomically.
+ * @desc: volume descriptor
+ * @lnum: logical eraseblock number to change
+ * @buf: data to write
+ * @len: how many bytes to write
+ * @dtype: expected data type
+ *
+ * This function changes the contents of a logical eraseblock atomically. @buf
+ * has to contain new logical eraseblock data, and @len - the length of the
+ * data, which has to be aligned. The length may be shorter then the logical
+ * eraseblock size, ant the logical eraseblock may be appended to more times
+ * later on. This function guarantees that in case of an unclean reboot the old
+ * contents is preserved. Returns zero in case of success and a negative error
+ * code in case of failure.
+ */
+int ubi_leb_change(struct ubi_volume_desc *desc, int lnum, const void *buf,
+		   int len, int dtype)
+{
+	struct ubi_volume *vol = desc->vol;
+	struct ubi_device *ubi = vol->ubi;
+	int vol_id = vol->vol_id;
+
+	dbg_msg("atomically write %d bytes to LEB %d:%d", len, vol_id, lnum);
+
+	if (vol_id < 0 || vol_id >= ubi->vtbl_slots)
+		return -EINVAL;
+
+	if (desc->mode == UBI_READONLY || vol->vol_type == UBI_STATIC_VOLUME)
+		return -EROFS;
+
+	if (lnum < 0 || lnum >= vol->reserved_pebs || len < 0 ||
+	    len > vol->usable_leb_size || len & (ubi->min_io_size - 1))
+		return -EINVAL;
+
+	if (dtype != UBI_LONGTERM && dtype != UBI_SHORTTERM &&
+	    dtype != UBI_UNKNOWN)
+		return -EINVAL;
+
+	if (vol->upd_marker)
+		return -EBADF;
+
+	if (len == 0)
+		return 0;
+
+	return ubi_eba_atomic_leb_change(ubi, vol, lnum, buf, len, dtype);
+}
+EXPORT_SYMBOL_GPL(ubi_leb_change);
+
+/**
+ * ubi_leb_erase - erase logical eraseblock.
+ * @desc: volume descriptor
+ * @lnum: logical eraseblock number
+ *
+ * This function un-maps logical eraseblock @lnum and synchronously erases the
+ * correspondent physical eraseblock. Returns zero in case of success and a
+ * negative error code in case of failure.
+ *
+ * If the volume is damaged because of an interrupted update this function just
+ * returns immediately with %-EBADF code.
+ */
+int ubi_leb_erase(struct ubi_volume_desc *desc, int lnum)
+{
+	struct ubi_volume *vol = desc->vol;
+	struct ubi_device *ubi = vol->ubi;
+	int err;
+
+	dbg_msg("erase LEB %d:%d", vol->vol_id, lnum);
+
+	if (desc->mode == UBI_READONLY || vol->vol_type == UBI_STATIC_VOLUME)
+		return -EROFS;
+
+	if (lnum < 0 || lnum >= vol->reserved_pebs)
+		return -EINVAL;
+
+	if (vol->upd_marker)
+		return -EBADF;
+
+	err = ubi_eba_unmap_leb(ubi, vol, lnum);
+	if (err)
+		return err;
+
+	return ubi_wl_flush(ubi);
+}
+EXPORT_SYMBOL_GPL(ubi_leb_erase);
+
+/**
+ * ubi_leb_unmap - un-map logical eraseblock.
+ * @desc: volume descriptor
+ * @lnum: logical eraseblock number
+ *
+ * This function un-maps logical eraseblock @lnum and schedules the
+ * corresponding physical eraseblock for erasure, so that it will eventually be
+ * physically erased in background. This operation is much faster then the
+ * erase operation.
+ *
+ * Unlike erase, the un-map operation does not guarantee that the logical
+ * eraseblock will contain all 0xFF bytes when UBI is initialized again. For
+ * example, if several logical eraseblocks are un-mapped, and an unclean reboot
+ * happens after this, the logical eraseblocks will not necessarily be
+ * un-mapped again when this MTD device is attached. They may actually be
+ * mapped to the same physical eraseblocks again. So, this function has to be
+ * used with care.
+ *
+ * In other words, when un-mapping a logical eraseblock, UBI does not store
+ * any information about this on the flash media, it just marks the logical
+ * eraseblock as "un-mapped" in RAM. If UBI is detached before the physical
+ * eraseblock is physically erased, it will be mapped again to the same logical
+ * eraseblock when the MTD device is attached again.
+ *
+ * The main and obvious use-case of this function is when the contents of a
+ * logical eraseblock has to be re-written. Then it is much more efficient to
+ * first un-map it, then write new data, rather then first erase it, then write
+ * new data. Note, once new data has been written to the logical eraseblock,
+ * UBI guarantees that the old contents has gone forever. In other words, if an
+ * unclean reboot happens after the logical eraseblock has been un-mapped and
+ * then written to, it will contain the last written data.
+ *
+ * This function returns zero in case of success and a negative error code in
+ * case of failure. If the volume is damaged because of an interrupted update
+ * this function just returns immediately with %-EBADF code.
+ */
+int ubi_leb_unmap(struct ubi_volume_desc *desc, int lnum)
+{
+	struct ubi_volume *vol = desc->vol;
+	struct ubi_device *ubi = vol->ubi;
+
+	dbg_msg("unmap LEB %d:%d", vol->vol_id, lnum);
+
+	if (desc->mode == UBI_READONLY || vol->vol_type == UBI_STATIC_VOLUME)
+		return -EROFS;
+
+	if (lnum < 0 || lnum >= vol->reserved_pebs)
+		return -EINVAL;
+
+	if (vol->upd_marker)
+		return -EBADF;
+
+	return ubi_eba_unmap_leb(ubi, vol, lnum);
+}
+EXPORT_SYMBOL_GPL(ubi_leb_unmap);
+
+/**
+ * ubi_leb_map - map logical erasblock to a physical eraseblock.
+ * @desc: volume descriptor
+ * @lnum: logical eraseblock number
+ * @dtype: expected data type
+ *
+ * This function maps an un-mapped logical eraseblock @lnum to a physical
+ * eraseblock. This means, that after a successfull invocation of this
+ * function the logical eraseblock @lnum will be empty (contain only %0xFF
+ * bytes) and be mapped to a physical eraseblock, even if an unclean reboot
+ * happens.
+ *
+ * This function returns zero in case of success, %-EBADF if the volume is
+ * damaged because of an interrupted update, %-EBADMSG if the logical
+ * eraseblock is already mapped, and other negative error codes in case of
+ * other failures.
+ */
+int ubi_leb_map(struct ubi_volume_desc *desc, int lnum, int dtype)
+{
+	struct ubi_volume *vol = desc->vol;
+	struct ubi_device *ubi = vol->ubi;
+
+	dbg_msg("unmap LEB %d:%d", vol->vol_id, lnum);
+
+	if (desc->mode == UBI_READONLY || vol->vol_type == UBI_STATIC_VOLUME)
+		return -EROFS;
+
+	if (lnum < 0 || lnum >= vol->reserved_pebs)
+		return -EINVAL;
+
+	if (dtype != UBI_LONGTERM && dtype != UBI_SHORTTERM &&
+	    dtype != UBI_UNKNOWN)
+		return -EINVAL;
+
+	if (vol->upd_marker)
+		return -EBADF;
+
+	if (vol->eba_tbl[lnum] >= 0)
+		return -EBADMSG;
+
+	return ubi_eba_write_leb(ubi, vol, lnum, NULL, 0, 0, dtype);
+}
+EXPORT_SYMBOL_GPL(ubi_leb_map);
+
+/**
+ * ubi_is_mapped - check if logical eraseblock is mapped.
+ * @desc: volume descriptor
+ * @lnum: logical eraseblock number
+ *
+ * This function checks if logical eraseblock @lnum is mapped to a physical
+ * eraseblock. If a logical eraseblock is un-mapped, this does not necessarily
+ * mean it will still be un-mapped after the UBI device is re-attached. The
+ * logical eraseblock may become mapped to the physical eraseblock it was last
+ * mapped to.
+ *
+ * This function returns %1 if the LEB is mapped, %0 if not, and a negative
+ * error code in case of failure. If the volume is damaged because of an
+ * interrupted update this function just returns immediately with %-EBADF error
+ * code.
+ */
+int ubi_is_mapped(struct ubi_volume_desc *desc, int lnum)
+{
+	struct ubi_volume *vol = desc->vol;
+
+	dbg_msg("test LEB %d:%d", vol->vol_id, lnum);
+
+	if (lnum < 0 || lnum >= vol->reserved_pebs)
+		return -EINVAL;
+
+	if (vol->upd_marker)
+		return -EBADF;
+
+	return vol->eba_tbl[lnum] >= 0;
+}
+EXPORT_SYMBOL_GPL(ubi_is_mapped);
diff --git a/drivers/mtd/ubi/misc.c b/drivers/mtd/ubi/misc.c
new file mode 100644
index 000000000..a6410bfb6
--- /dev/null
+++ b/drivers/mtd/ubi/misc.c
@@ -0,0 +1,106 @@
+/*
+ * Copyright (c) International Business Machines Corp., 2006
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ * Author: Artem Bityutskiy (Битюцкий �ртём)
+ */
+
+/* Here we keep miscellaneous functions which are used all over the UBI code */
+
+#include <ubi_uboot.h>
+#include "ubi.h"
+
+/**
+ * calc_data_len - calculate how much real data is stored in a buffer.
+ * @ubi: UBI device description object
+ * @buf: a buffer with the contents of the physical eraseblock
+ * @length: the buffer length
+ *
+ * This function calculates how much "real data" is stored in @buf and returnes
+ * the length. Continuous 0xFF bytes at the end of the buffer are not
+ * considered as "real data".
+ */
+int ubi_calc_data_len(const struct ubi_device *ubi, const void *buf,
+		      int length)
+{
+	int i;
+
+	ubi_assert(!(length & (ubi->min_io_size - 1)));
+
+	for (i = length - 1; i >= 0; i--)
+		if (((const uint8_t *)buf)[i] != 0xFF)
+			break;
+
+	/* The resulting length must be aligned to the minimum flash I/O size */
+	length = ALIGN(i + 1, ubi->min_io_size);
+	return length;
+}
+
+/**
+ * ubi_check_volume - check the contents of a static volume.
+ * @ubi: UBI device description object
+ * @vol_id: ID of the volume to check
+ *
+ * This function checks if static volume @vol_id is corrupted by fully reading
+ * it and checking data CRC. This function returns %0 if the volume is not
+ * corrupted, %1 if it is corrupted and a negative error code in case of
+ * failure. Dynamic volumes are not checked and zero is returned immediately.
+ */
+int ubi_check_volume(struct ubi_device *ubi, int vol_id)
+{
+	void *buf;
+	int err = 0, i;
+	struct ubi_volume *vol = ubi->volumes[vol_id];
+
+	if (vol->vol_type != UBI_STATIC_VOLUME)
+		return 0;
+
+	buf = vmalloc(vol->usable_leb_size);
+	if (!buf)
+		return -ENOMEM;
+
+	for (i = 0; i < vol->used_ebs; i++) {
+		int size;
+
+		if (i == vol->used_ebs - 1)
+			size = vol->last_eb_bytes;
+		else
+			size = vol->usable_leb_size;
+
+		err = ubi_eba_read_leb(ubi, vol, i, buf, 0, size, 1);
+		if (err) {
+			if (err == -EBADMSG)
+				err = 1;
+			break;
+		}
+	}
+
+	vfree(buf);
+	return err;
+}
+
+/**
+ * ubi_calculate_rsvd_pool - calculate how many PEBs must be reserved for bad
+ * eraseblock handling.
+ * @ubi: UBI device description object
+ */
+void ubi_calculate_reserved(struct ubi_device *ubi)
+{
+	ubi->beb_rsvd_level = ubi->good_peb_count/100;
+	ubi->beb_rsvd_level *= CONFIG_MTD_UBI_BEB_RESERVE;
+	if (ubi->beb_rsvd_level < MIN_RESEVED_PEBS)
+		ubi->beb_rsvd_level = MIN_RESEVED_PEBS;
+}
diff --git a/drivers/mtd/ubi/scan.c b/drivers/mtd/ubi/scan.c
new file mode 100644
index 000000000..d5c1d27dc
--- /dev/null
+++ b/drivers/mtd/ubi/scan.c
@@ -0,0 +1,1360 @@
+/*
+ * Copyright (c) International Business Machines Corp., 2006
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ * Author: Artem Bityutskiy (Битюцкий �ртём)
+ */
+
+/*
+ * UBI scanning unit.
+ *
+ * This unit is responsible for scanning the flash media, checking UBI
+ * headers and providing complete information about the UBI flash image.
+ *
+ * The scanning information is represented by a &struct ubi_scan_info' object.
+ * Information about found volumes is represented by &struct ubi_scan_volume
+ * objects which are kept in volume RB-tree with root at the @volumes field.
+ * The RB-tree is indexed by the volume ID.
+ *
+ * Found logical eraseblocks are represented by &struct ubi_scan_leb objects.
+ * These objects are kept in per-volume RB-trees with the root at the
+ * corresponding &struct ubi_scan_volume object. To put it differently, we keep
+ * an RB-tree of per-volume objects and each of these objects is the root of
+ * RB-tree of per-eraseblock objects.
+ *
+ * Corrupted physical eraseblocks are put to the @corr list, free physical
+ * eraseblocks are put to the @free list and the physical eraseblock to be
+ * erased are put to the @erase list.
+ */
+
+#ifdef UBI_LINUX
+#include <linux/err.h>
+#include <linux/crc32.h>
+#include <asm/div64.h>
+#endif
+
+#include <ubi_uboot.h>
+#include "ubi.h"
+
+#ifdef CONFIG_MTD_UBI_DEBUG_PARANOID
+static int paranoid_check_si(struct ubi_device *ubi, struct ubi_scan_info *si);
+#else
+#define paranoid_check_si(ubi, si) 0
+#endif
+
+/* Temporary variables used during scanning */
+static struct ubi_ec_hdr *ech;
+static struct ubi_vid_hdr *vidh;
+
+/**
+ * add_to_list - add physical eraseblock to a list.
+ * @si: scanning information
+ * @pnum: physical eraseblock number to add
+ * @ec: erase counter of the physical eraseblock
+ * @list: the list to add to
+ *
+ * This function adds physical eraseblock @pnum to free, erase, corrupted or
+ * alien lists. Returns zero in case of success and a negative error code in
+ * case of failure.
+ */
+static int add_to_list(struct ubi_scan_info *si, int pnum, int ec,
+		       struct list_head *list)
+{
+	struct ubi_scan_leb *seb;
+
+	if (list == &si->free)
+		dbg_bld("add to free: PEB %d, EC %d", pnum, ec);
+	else if (list == &si->erase)
+		dbg_bld("add to erase: PEB %d, EC %d", pnum, ec);
+	else if (list == &si->corr)
+		dbg_bld("add to corrupted: PEB %d, EC %d", pnum, ec);
+	else if (list == &si->alien)
+		dbg_bld("add to alien: PEB %d, EC %d", pnum, ec);
+	else
+		BUG();
+
+	seb = kmalloc(sizeof(struct ubi_scan_leb), GFP_KERNEL);
+	if (!seb)
+		return -ENOMEM;
+
+	seb->pnum = pnum;
+	seb->ec = ec;
+	list_add_tail(&seb->u.list, list);
+	return 0;
+}
+
+/**
+ * validate_vid_hdr - check that volume identifier header is correct and
+ * consistent.
+ * @vid_hdr: the volume identifier header to check
+ * @sv: information about the volume this logical eraseblock belongs to
+ * @pnum: physical eraseblock number the VID header came from
+ *
+ * This function checks that data stored in @vid_hdr is consistent. Returns
+ * non-zero if an inconsistency was found and zero if not.
+ *
+ * Note, UBI does sanity check of everything it reads from the flash media.
+ * Most of the checks are done in the I/O unit. Here we check that the
+ * information in the VID header is consistent to the information in other VID
+ * headers of the same volume.
+ */
+static int validate_vid_hdr(const struct ubi_vid_hdr *vid_hdr,
+			    const struct ubi_scan_volume *sv, int pnum)
+{
+	int vol_type = vid_hdr->vol_type;
+	int vol_id = be32_to_cpu(vid_hdr->vol_id);
+	int used_ebs = be32_to_cpu(vid_hdr->used_ebs);
+	int data_pad = be32_to_cpu(vid_hdr->data_pad);
+
+	if (sv->leb_count != 0) {
+		int sv_vol_type;
+
+		/*
+		 * This is not the first logical eraseblock belonging to this
+		 * volume. Ensure that the data in its VID header is consistent
+		 * to the data in previous logical eraseblock headers.
+		 */
+
+		if (vol_id != sv->vol_id) {
+			dbg_err("inconsistent vol_id");
+			goto bad;
+		}
+
+		if (sv->vol_type == UBI_STATIC_VOLUME)
+			sv_vol_type = UBI_VID_STATIC;
+		else
+			sv_vol_type = UBI_VID_DYNAMIC;
+
+		if (vol_type != sv_vol_type) {
+			dbg_err("inconsistent vol_type");
+			goto bad;
+		}
+
+		if (used_ebs != sv->used_ebs) {
+			dbg_err("inconsistent used_ebs");
+			goto bad;
+		}
+
+		if (data_pad != sv->data_pad) {
+			dbg_err("inconsistent data_pad");
+			goto bad;
+		}
+	}
+
+	return 0;
+
+bad:
+	ubi_err("inconsistent VID header at PEB %d", pnum);
+	ubi_dbg_dump_vid_hdr(vid_hdr);
+	ubi_dbg_dump_sv(sv);
+	return -EINVAL;
+}
+
+/**
+ * add_volume - add volume to the scanning information.
+ * @si: scanning information
+ * @vol_id: ID of the volume to add
+ * @pnum: physical eraseblock number
+ * @vid_hdr: volume identifier header
+ *
+ * If the volume corresponding to the @vid_hdr logical eraseblock is already
+ * present in the scanning information, this function does nothing. Otherwise
+ * it adds corresponding volume to the scanning information. Returns a pointer
+ * to the scanning volume object in case of success and a negative error code
+ * in case of failure.
+ */
+static struct ubi_scan_volume *add_volume(struct ubi_scan_info *si, int vol_id,
+					  int pnum,
+					  const struct ubi_vid_hdr *vid_hdr)
+{
+	struct ubi_scan_volume *sv;
+	struct rb_node **p = &si->volumes.rb_node, *parent = NULL;
+
+	ubi_assert(vol_id == be32_to_cpu(vid_hdr->vol_id));
+
+	/* Walk the volume RB-tree to look if this volume is already present */
+	while (*p) {
+		parent = *p;
+		sv = rb_entry(parent, struct ubi_scan_volume, rb);
+
+		if (vol_id == sv->vol_id)
+			return sv;
+
+		if (vol_id > sv->vol_id)
+			p = &(*p)->rb_left;
+		else
+			p = &(*p)->rb_right;
+	}
+
+	/* The volume is absent - add it */
+	sv = kmalloc(sizeof(struct ubi_scan_volume), GFP_KERNEL);
+	if (!sv)
+		return ERR_PTR(-ENOMEM);
+
+	sv->highest_lnum = sv->leb_count = 0;
+	sv->vol_id = vol_id;
+	sv->root = RB_ROOT;
+	sv->used_ebs = be32_to_cpu(vid_hdr->used_ebs);
+	sv->data_pad = be32_to_cpu(vid_hdr->data_pad);
+	sv->compat = vid_hdr->compat;
+	sv->vol_type = vid_hdr->vol_type == UBI_VID_DYNAMIC ? UBI_DYNAMIC_VOLUME
+							    : UBI_STATIC_VOLUME;
+	if (vol_id > si->highest_vol_id)
+		si->highest_vol_id = vol_id;
+
+	rb_link_node(&sv->rb, parent, p);
+	rb_insert_color(&sv->rb, &si->volumes);
+	si->vols_found += 1;
+	dbg_bld("added volume %d", vol_id);
+	return sv;
+}
+
+/**
+ * compare_lebs - find out which logical eraseblock is newer.
+ * @ubi: UBI device description object
+ * @seb: first logical eraseblock to compare
+ * @pnum: physical eraseblock number of the second logical eraseblock to
+ * compare
+ * @vid_hdr: volume identifier header of the second logical eraseblock
+ *
+ * This function compares 2 copies of a LEB and informs which one is newer. In
+ * case of success this function returns a positive value, in case of failure, a
+ * negative error code is returned. The success return codes use the following
+ * bits:
+ *     o bit 0 is cleared: the first PEB (described by @seb) is newer then the
+ *       second PEB (described by @pnum and @vid_hdr);
+ *     o bit 0 is set: the second PEB is newer;
+ *     o bit 1 is cleared: no bit-flips were detected in the newer LEB;
+ *     o bit 1 is set: bit-flips were detected in the newer LEB;
+ *     o bit 2 is cleared: the older LEB is not corrupted;
+ *     o bit 2 is set: the older LEB is corrupted.
+ */
+static int compare_lebs(struct ubi_device *ubi, const struct ubi_scan_leb *seb,
+			int pnum, const struct ubi_vid_hdr *vid_hdr)
+{
+	void *buf;
+	int len, err, second_is_newer, bitflips = 0, corrupted = 0;
+	uint32_t data_crc, crc;
+	struct ubi_vid_hdr *vh = NULL;
+	unsigned long long sqnum2 = be64_to_cpu(vid_hdr->sqnum);
+
+	if (seb->sqnum == 0 && sqnum2 == 0) {
+		long long abs, v1 = seb->leb_ver, v2 = be32_to_cpu(vid_hdr->leb_ver);
+
+		/*
+		 * UBI constantly increases the logical eraseblock version
+		 * number and it can overflow. Thus, we have to bear in mind
+		 * that versions that are close to %0xFFFFFFFF are less then
+		 * versions that are close to %0.
+		 *
+		 * The UBI WL unit guarantees that the number of pending tasks
+		 * is not greater then %0x7FFFFFFF. So, if the difference
+		 * between any two versions is greater or equivalent to
+		 * %0x7FFFFFFF, there was an overflow and the logical
+		 * eraseblock with lower version is actually newer then the one
+		 * with higher version.
+		 *
+		 * FIXME: but this is anyway obsolete and will be removed at
+		 * some point.
+		 */
+		dbg_bld("using old crappy leb_ver stuff");
+
+		if (v1 == v2) {
+			ubi_err("PEB %d and PEB %d have the same version %lld",
+				seb->pnum, pnum, v1);
+			return -EINVAL;
+		}
+
+		abs = v1 - v2;
+		if (abs < 0)
+			abs = -abs;
+
+		if (abs < 0x7FFFFFFF)
+			/* Non-overflow situation */
+			second_is_newer = (v2 > v1);
+		else
+			second_is_newer = (v2 < v1);
+	} else
+		/* Obviously the LEB with lower sequence counter is older */
+		second_is_newer = sqnum2 > seb->sqnum;
+
+	/*
+	 * Now we know which copy is newer. If the copy flag of the PEB with
+	 * newer version is not set, then we just return, otherwise we have to
+	 * check data CRC. For the second PEB we already have the VID header,
+	 * for the first one - we'll need to re-read it from flash.
+	 *
+	 * FIXME: this may be optimized so that we wouldn't read twice.
+	 */
+
+	if (second_is_newer) {
+		if (!vid_hdr->copy_flag) {
+			/* It is not a copy, so it is newer */
+			dbg_bld("second PEB %d is newer, copy_flag is unset",
+				pnum);
+			return 1;
+		}
+	} else {
+		pnum = seb->pnum;
+
+		vh = ubi_zalloc_vid_hdr(ubi, GFP_KERNEL);
+		if (!vh)
+			return -ENOMEM;
+
+		err = ubi_io_read_vid_hdr(ubi, pnum, vh, 0);
+		if (err) {
+			if (err == UBI_IO_BITFLIPS)
+				bitflips = 1;
+			else {
+				dbg_err("VID of PEB %d header is bad, but it "
+					"was OK earlier", pnum);
+				if (err > 0)
+					err = -EIO;
+
+				goto out_free_vidh;
+			}
+		}
+
+		if (!vh->copy_flag) {
+			/* It is not a copy, so it is newer */
+			dbg_bld("first PEB %d is newer, copy_flag is unset",
+				pnum);
+			err = bitflips << 1;
+			goto out_free_vidh;
+		}
+
+		vid_hdr = vh;
+	}
+
+	/* Read the data of the copy and check the CRC */
+
+	len = be32_to_cpu(vid_hdr->data_size);
+	buf = vmalloc(len);
+	if (!buf) {
+		err = -ENOMEM;
+		goto out_free_vidh;
+	}
+
+	err = ubi_io_read_data(ubi, buf, pnum, 0, len);
+	if (err && err != UBI_IO_BITFLIPS)
+		goto out_free_buf;
+
+	data_crc = be32_to_cpu(vid_hdr->data_crc);
+	crc = crc32(UBI_CRC32_INIT, buf, len);
+	if (crc != data_crc) {
+		dbg_bld("PEB %d CRC error: calculated %#08x, must be %#08x",
+			pnum, crc, data_crc);
+		corrupted = 1;
+		bitflips = 0;
+		second_is_newer = !second_is_newer;
+	} else {
+		dbg_bld("PEB %d CRC is OK", pnum);
+		bitflips = !!err;
+	}
+
+	vfree(buf);
+	ubi_free_vid_hdr(ubi, vh);
+
+	if (second_is_newer)
+		dbg_bld("second PEB %d is newer, copy_flag is set", pnum);
+	else
+		dbg_bld("first PEB %d is newer, copy_flag is set", pnum);
+
+	return second_is_newer | (bitflips << 1) | (corrupted << 2);
+
+out_free_buf:
+	vfree(buf);
+out_free_vidh:
+	ubi_free_vid_hdr(ubi, vh);
+	return err;
+}
+
+/**
+ * ubi_scan_add_used - add information about a physical eraseblock to the
+ * scanning information.
+ * @ubi: UBI device description object
+ * @si: scanning information
+ * @pnum: the physical eraseblock number
+ * @ec: erase counter
+ * @vid_hdr: the volume identifier header
+ * @bitflips: if bit-flips were detected when this physical eraseblock was read
+ *
+ * This function adds information about a used physical eraseblock to the
+ * 'used' tree of the corresponding volume. The function is rather complex
+ * because it has to handle cases when this is not the first physical
+ * eraseblock belonging to the same logical eraseblock, and the newer one has
+ * to be picked, while the older one has to be dropped. This function returns
+ * zero in case of success and a negative error code in case of failure.
+ */
+int ubi_scan_add_used(struct ubi_device *ubi, struct ubi_scan_info *si,
+		      int pnum, int ec, const struct ubi_vid_hdr *vid_hdr,
+		      int bitflips)
+{
+	int err, vol_id, lnum;
+	uint32_t leb_ver;
+	unsigned long long sqnum;
+	struct ubi_scan_volume *sv;
+	struct ubi_scan_leb *seb;
+	struct rb_node **p, *parent = NULL;
+
+	vol_id = be32_to_cpu(vid_hdr->vol_id);
+	lnum = be32_to_cpu(vid_hdr->lnum);
+	sqnum = be64_to_cpu(vid_hdr->sqnum);
+	leb_ver = be32_to_cpu(vid_hdr->leb_ver);
+
+	dbg_bld("PEB %d, LEB %d:%d, EC %d, sqnum %llu, ver %u, bitflips %d",
+		pnum, vol_id, lnum, ec, sqnum, leb_ver, bitflips);
+
+	sv = add_volume(si, vol_id, pnum, vid_hdr);
+	if (IS_ERR(sv) < 0)
+		return PTR_ERR(sv);
+
+	if (si->max_sqnum < sqnum)
+		si->max_sqnum = sqnum;
+
+	/*
+	 * Walk the RB-tree of logical eraseblocks of volume @vol_id to look
+	 * if this is the first instance of this logical eraseblock or not.
+	 */
+	p = &sv->root.rb_node;
+	while (*p) {
+		int cmp_res;
+
+		parent = *p;
+		seb = rb_entry(parent, struct ubi_scan_leb, u.rb);
+		if (lnum != seb->lnum) {
+			if (lnum < seb->lnum)
+				p = &(*p)->rb_left;
+			else
+				p = &(*p)->rb_right;
+			continue;
+		}
+
+		/*
+		 * There is already a physical eraseblock describing the same
+		 * logical eraseblock present.
+		 */
+
+		dbg_bld("this LEB already exists: PEB %d, sqnum %llu, "
+			"LEB ver %u, EC %d", seb->pnum, seb->sqnum,
+			seb->leb_ver, seb->ec);
+
+		/*
+		 * Make sure that the logical eraseblocks have different
+		 * versions. Otherwise the image is bad.
+		 */
+		if (seb->leb_ver == leb_ver && leb_ver != 0) {
+			ubi_err("two LEBs with same version %u", leb_ver);
+			ubi_dbg_dump_seb(seb, 0);
+			ubi_dbg_dump_vid_hdr(vid_hdr);
+			return -EINVAL;
+		}
+
+		/*
+		 * Make sure that the logical eraseblocks have different
+		 * sequence numbers. Otherwise the image is bad.
+		 *
+		 * FIXME: remove 'sqnum != 0' check when leb_ver is removed.
+		 */
+		if (seb->sqnum == sqnum && sqnum != 0) {
+			ubi_err("two LEBs with same sequence number %llu",
+				sqnum);
+			ubi_dbg_dump_seb(seb, 0);
+			ubi_dbg_dump_vid_hdr(vid_hdr);
+			return -EINVAL;
+		}
+
+		/*
+		 * Now we have to drop the older one and preserve the newer
+		 * one.
+		 */
+		cmp_res = compare_lebs(ubi, seb, pnum, vid_hdr);
+		if (cmp_res < 0)
+			return cmp_res;
+
+		if (cmp_res & 1) {
+			/*
+			 * This logical eraseblock is newer then the one
+			 * found earlier.
+			 */
+			err = validate_vid_hdr(vid_hdr, sv, pnum);
+			if (err)
+				return err;
+
+			if (cmp_res & 4)
+				err = add_to_list(si, seb->pnum, seb->ec,
+						  &si->corr);
+			else
+				err = add_to_list(si, seb->pnum, seb->ec,
+						  &si->erase);
+			if (err)
+				return err;
+
+			seb->ec = ec;
+			seb->pnum = pnum;
+			seb->scrub = ((cmp_res & 2) || bitflips);
+			seb->sqnum = sqnum;
+			seb->leb_ver = leb_ver;
+
+			if (sv->highest_lnum == lnum)
+				sv->last_data_size =
+					be32_to_cpu(vid_hdr->data_size);
+
+			return 0;
+		} else {
+			/*
+			 * This logical eraseblock is older then the one found
+			 * previously.
+			 */
+			if (cmp_res & 4)
+				return add_to_list(si, pnum, ec, &si->corr);
+			else
+				return add_to_list(si, pnum, ec, &si->erase);
+		}
+	}
+
+	/*
+	 * We've met this logical eraseblock for the first time, add it to the
+	 * scanning information.
+	 */
+
+	err = validate_vid_hdr(vid_hdr, sv, pnum);
+	if (err)
+		return err;
+
+	seb = kmalloc(sizeof(struct ubi_scan_leb), GFP_KERNEL);
+	if (!seb)
+		return -ENOMEM;
+
+	seb->ec = ec;
+	seb->pnum = pnum;
+	seb->lnum = lnum;
+	seb->sqnum = sqnum;
+	seb->scrub = bitflips;
+	seb->leb_ver = leb_ver;
+
+	if (sv->highest_lnum <= lnum) {
+		sv->highest_lnum = lnum;
+		sv->last_data_size = be32_to_cpu(vid_hdr->data_size);
+	}
+
+	sv->leb_count += 1;
+	rb_link_node(&seb->u.rb, parent, p);
+	rb_insert_color(&seb->u.rb, &sv->root);
+	return 0;
+}
+
+/**
+ * ubi_scan_find_sv - find information about a particular volume in the
+ * scanning information.
+ * @si: scanning information
+ * @vol_id: the requested volume ID
+ *
+ * This function returns a pointer to the volume description or %NULL if there
+ * are no data about this volume in the scanning information.
+ */
+struct ubi_scan_volume *ubi_scan_find_sv(const struct ubi_scan_info *si,
+					 int vol_id)
+{
+	struct ubi_scan_volume *sv;
+	struct rb_node *p = si->volumes.rb_node;
+
+	while (p) {
+		sv = rb_entry(p, struct ubi_scan_volume, rb);
+
+		if (vol_id == sv->vol_id)
+			return sv;
+
+		if (vol_id > sv->vol_id)
+			p = p->rb_left;
+		else
+			p = p->rb_right;
+	}
+
+	return NULL;
+}
+
+/**
+ * ubi_scan_find_seb - find information about a particular logical
+ * eraseblock in the volume scanning information.
+ * @sv: a pointer to the volume scanning information
+ * @lnum: the requested logical eraseblock
+ *
+ * This function returns a pointer to the scanning logical eraseblock or %NULL
+ * if there are no data about it in the scanning volume information.
+ */
+struct ubi_scan_leb *ubi_scan_find_seb(const struct ubi_scan_volume *sv,
+				       int lnum)
+{
+	struct ubi_scan_leb *seb;
+	struct rb_node *p = sv->root.rb_node;
+
+	while (p) {
+		seb = rb_entry(p, struct ubi_scan_leb, u.rb);
+
+		if (lnum == seb->lnum)
+			return seb;
+
+		if (lnum > seb->lnum)
+			p = p->rb_left;
+		else
+			p = p->rb_right;
+	}
+
+	return NULL;
+}
+
+/**
+ * ubi_scan_rm_volume - delete scanning information about a volume.
+ * @si: scanning information
+ * @sv: the volume scanning information to delete
+ */
+void ubi_scan_rm_volume(struct ubi_scan_info *si, struct ubi_scan_volume *sv)
+{
+	struct rb_node *rb;
+	struct ubi_scan_leb *seb;
+
+	dbg_bld("remove scanning information about volume %d", sv->vol_id);
+
+	while ((rb = rb_first(&sv->root))) {
+		seb = rb_entry(rb, struct ubi_scan_leb, u.rb);
+		rb_erase(&seb->u.rb, &sv->root);
+		list_add_tail(&seb->u.list, &si->erase);
+	}
+
+	rb_erase(&sv->rb, &si->volumes);
+	kfree(sv);
+	si->vols_found -= 1;
+}
+
+/**
+ * ubi_scan_erase_peb - erase a physical eraseblock.
+ * @ubi: UBI device description object
+ * @si: scanning information
+ * @pnum: physical eraseblock number to erase;
+ * @ec: erase counter value to write (%UBI_SCAN_UNKNOWN_EC if it is unknown)
+ *
+ * This function erases physical eraseblock 'pnum', and writes the erase
+ * counter header to it. This function should only be used on UBI device
+ * initialization stages, when the EBA unit had not been yet initialized. This
+ * function returns zero in case of success and a negative error code in case
+ * of failure.
+ */
+int ubi_scan_erase_peb(struct ubi_device *ubi, const struct ubi_scan_info *si,
+		       int pnum, int ec)
+{
+	int err;
+	struct ubi_ec_hdr *ec_hdr;
+
+	if ((long long)ec >= UBI_MAX_ERASECOUNTER) {
+		/*
+		 * Erase counter overflow. Upgrade UBI and use 64-bit
+		 * erase counters internally.
+		 */
+		ubi_err("erase counter overflow at PEB %d, EC %d", pnum, ec);
+		return -EINVAL;
+	}
+
+	ec_hdr = kzalloc(ubi->ec_hdr_alsize, GFP_KERNEL);
+	if (!ec_hdr)
+		return -ENOMEM;
+
+	ec_hdr->ec = cpu_to_be64(ec);
+
+	err = ubi_io_sync_erase(ubi, pnum, 0);
+	if (err < 0)
+		goto out_free;
+
+	err = ubi_io_write_ec_hdr(ubi, pnum, ec_hdr);
+
+out_free:
+	kfree(ec_hdr);
+	return err;
+}
+
+/**
+ * ubi_scan_get_free_peb - get a free physical eraseblock.
+ * @ubi: UBI device description object
+ * @si: scanning information
+ *
+ * This function returns a free physical eraseblock. It is supposed to be
+ * called on the UBI initialization stages when the wear-leveling unit is not
+ * initialized yet. This function picks a physical eraseblocks from one of the
+ * lists, writes the EC header if it is needed, and removes it from the list.
+ *
+ * This function returns scanning physical eraseblock information in case of
+ * success and an error code in case of failure.
+ */
+struct ubi_scan_leb *ubi_scan_get_free_peb(struct ubi_device *ubi,
+					   struct ubi_scan_info *si)
+{
+	int err = 0, i;
+	struct ubi_scan_leb *seb;
+
+	if (!list_empty(&si->free)) {
+		seb = list_entry(si->free.next, struct ubi_scan_leb, u.list);
+		list_del(&seb->u.list);
+		dbg_bld("return free PEB %d, EC %d", seb->pnum, seb->ec);
+		return seb;
+	}
+
+	for (i = 0; i < 2; i++) {
+		struct list_head *head;
+		struct ubi_scan_leb *tmp_seb;
+
+		if (i == 0)
+			head = &si->erase;
+		else
+			head = &si->corr;
+
+		/*
+		 * We try to erase the first physical eraseblock from the @head
+		 * list and pick it if we succeed, or try to erase the
+		 * next one if not. And so forth. We don't want to take care
+		 * about bad eraseblocks here - they'll be handled later.
+		 */
+		list_for_each_entry_safe(seb, tmp_seb, head, u.list) {
+			if (seb->ec == UBI_SCAN_UNKNOWN_EC)
+				seb->ec = si->mean_ec;
+
+			err = ubi_scan_erase_peb(ubi, si, seb->pnum, seb->ec+1);
+			if (err)
+				continue;
+
+			seb->ec += 1;
+			list_del(&seb->u.list);
+			dbg_bld("return PEB %d, EC %d", seb->pnum, seb->ec);
+			return seb;
+		}
+	}
+
+	ubi_err("no eraseblocks found");
+	return ERR_PTR(-ENOSPC);
+}
+
+/**
+ * process_eb - read UBI headers, check them and add corresponding data
+ * to the scanning information.
+ * @ubi: UBI device description object
+ * @si: scanning information
+ * @pnum: the physical eraseblock number
+ *
+ * This function returns a zero if the physical eraseblock was successfully
+ * handled and a negative error code in case of failure.
+ */
+static int process_eb(struct ubi_device *ubi, struct ubi_scan_info *si, int pnum)
+{
+	long long uninitialized_var(ec);
+	int err, bitflips = 0, vol_id, ec_corr = 0;
+
+	dbg_bld("scan PEB %d", pnum);
+
+	/* Skip bad physical eraseblocks */
+	err = ubi_io_is_bad(ubi, pnum);
+	if (err < 0)
+		return err;
+	else if (err) {
+		/*
+		 * FIXME: this is actually duty of the I/O unit to initialize
+		 * this, but MTD does not provide enough information.
+		 */
+		si->bad_peb_count += 1;
+		return 0;
+	}
+
+	err = ubi_io_read_ec_hdr(ubi, pnum, ech, 0);
+	if (err < 0)
+		return err;
+	else if (err == UBI_IO_BITFLIPS)
+		bitflips = 1;
+	else if (err == UBI_IO_PEB_EMPTY)
+		return add_to_list(si, pnum, UBI_SCAN_UNKNOWN_EC, &si->erase);
+	else if (err == UBI_IO_BAD_EC_HDR) {
+		/*
+		 * We have to also look at the VID header, possibly it is not
+		 * corrupted. Set %bitflips flag in order to make this PEB be
+		 * moved and EC be re-created.
+		 */
+		ec_corr = 1;
+		ec = UBI_SCAN_UNKNOWN_EC;
+		bitflips = 1;
+	}
+
+	si->is_empty = 0;
+
+	if (!ec_corr) {
+		/* Make sure UBI version is OK */
+		if (ech->version != UBI_VERSION) {
+			ubi_err("this UBI version is %d, image version is %d",
+				UBI_VERSION, (int)ech->version);
+			return -EINVAL;
+		}
+
+		ec = be64_to_cpu(ech->ec);
+		if (ec > UBI_MAX_ERASECOUNTER) {
+			/*
+			 * Erase counter overflow. The EC headers have 64 bits
+			 * reserved, but we anyway make use of only 31 bit
+			 * values, as this seems to be enough for any existing
+			 * flash. Upgrade UBI and use 64-bit erase counters
+			 * internally.
+			 */
+			ubi_err("erase counter overflow, max is %d",
+				UBI_MAX_ERASECOUNTER);
+			ubi_dbg_dump_ec_hdr(ech);
+			return -EINVAL;
+		}
+	}
+
+	/* OK, we've done with the EC header, let's look at the VID header */
+
+	err = ubi_io_read_vid_hdr(ubi, pnum, vidh, 0);
+	if (err < 0)
+		return err;
+	else if (err == UBI_IO_BITFLIPS)
+		bitflips = 1;
+	else if (err == UBI_IO_BAD_VID_HDR ||
+		 (err == UBI_IO_PEB_FREE && ec_corr)) {
+		/* VID header is corrupted */
+		err = add_to_list(si, pnum, ec, &si->corr);
+		if (err)
+			return err;
+		goto adjust_mean_ec;
+	} else if (err == UBI_IO_PEB_FREE) {
+		/* No VID header - the physical eraseblock is free */
+		err = add_to_list(si, pnum, ec, &si->free);
+		if (err)
+			return err;
+		goto adjust_mean_ec;
+	}
+
+	vol_id = be32_to_cpu(vidh->vol_id);
+	if (vol_id > UBI_MAX_VOLUMES && vol_id != UBI_LAYOUT_VOLUME_ID) {
+		int lnum = be32_to_cpu(vidh->lnum);
+
+		/* Unsupported internal volume */
+		switch (vidh->compat) {
+		case UBI_COMPAT_DELETE:
+			ubi_msg("\"delete\" compatible internal volume %d:%d"
+				" found, remove it", vol_id, lnum);
+			err = add_to_list(si, pnum, ec, &si->corr);
+			if (err)
+				return err;
+			break;
+
+		case UBI_COMPAT_RO:
+			ubi_msg("read-only compatible internal volume %d:%d"
+				" found, switch to read-only mode",
+				vol_id, lnum);
+			ubi->ro_mode = 1;
+			break;
+
+		case UBI_COMPAT_PRESERVE:
+			ubi_msg("\"preserve\" compatible internal volume %d:%d"
+				" found", vol_id, lnum);
+			err = add_to_list(si, pnum, ec, &si->alien);
+			if (err)
+				return err;
+			si->alien_peb_count += 1;
+			return 0;
+
+		case UBI_COMPAT_REJECT:
+			ubi_err("incompatible internal volume %d:%d found",
+				vol_id, lnum);
+			return -EINVAL;
+		}
+	}
+
+	/* Both UBI headers seem to be fine */
+	err = ubi_scan_add_used(ubi, si, pnum, ec, vidh, bitflips);
+	if (err)
+		return err;
+
+adjust_mean_ec:
+	if (!ec_corr) {
+		si->ec_sum += ec;
+		si->ec_count += 1;
+		if (ec > si->max_ec)
+			si->max_ec = ec;
+		if (ec < si->min_ec)
+			si->min_ec = ec;
+	}
+
+	return 0;
+}
+
+/**
+ * ubi_scan - scan an MTD device.
+ * @ubi: UBI device description object
+ *
+ * This function does full scanning of an MTD device and returns complete
+ * information about it. In case of failure, an error code is returned.
+ */
+struct ubi_scan_info *ubi_scan(struct ubi_device *ubi)
+{
+	int err, pnum;
+	struct rb_node *rb1, *rb2;
+	struct ubi_scan_volume *sv;
+	struct ubi_scan_leb *seb;
+	struct ubi_scan_info *si;
+
+	si = kzalloc(sizeof(struct ubi_scan_info), GFP_KERNEL);
+	if (!si)
+		return ERR_PTR(-ENOMEM);
+
+	INIT_LIST_HEAD(&si->corr);
+	INIT_LIST_HEAD(&si->free);
+	INIT_LIST_HEAD(&si->erase);
+	INIT_LIST_HEAD(&si->alien);
+	si->volumes = RB_ROOT;
+	si->is_empty = 1;
+
+	err = -ENOMEM;
+	ech = kzalloc(ubi->ec_hdr_alsize, GFP_KERNEL);
+	if (!ech)
+		goto out_si;
+
+	vidh = ubi_zalloc_vid_hdr(ubi, GFP_KERNEL);
+	if (!vidh)
+		goto out_ech;
+
+	for (pnum = 0; pnum < ubi->peb_count; pnum++) {
+		cond_resched();
+
+		dbg_msg("process PEB %d", pnum);
+		err = process_eb(ubi, si, pnum);
+		if (err < 0)
+			goto out_vidh;
+	}
+
+	dbg_msg("scanning is finished");
+
+	/* Calculate mean erase counter */
+	if (si->ec_count) {
+		do_div(si->ec_sum, si->ec_count);
+		si->mean_ec = si->ec_sum;
+	}
+
+	if (si->is_empty)
+		ubi_msg("empty MTD device detected");
+
+	/*
+	 * In case of unknown erase counter we use the mean erase counter
+	 * value.
+	 */
+	ubi_rb_for_each_entry(rb1, sv, &si->volumes, rb) {
+		ubi_rb_for_each_entry(rb2, seb, &sv->root, u.rb)
+			if (seb->ec == UBI_SCAN_UNKNOWN_EC)
+				seb->ec = si->mean_ec;
+	}
+
+	list_for_each_entry(seb, &si->free, u.list) {
+		if (seb->ec == UBI_SCAN_UNKNOWN_EC)
+			seb->ec = si->mean_ec;
+	}
+
+	list_for_each_entry(seb, &si->corr, u.list)
+		if (seb->ec == UBI_SCAN_UNKNOWN_EC)
+			seb->ec = si->mean_ec;
+
+	list_for_each_entry(seb, &si->erase, u.list)
+		if (seb->ec == UBI_SCAN_UNKNOWN_EC)
+			seb->ec = si->mean_ec;
+
+	err = paranoid_check_si(ubi, si);
+	if (err) {
+		if (err > 0)
+			err = -EINVAL;
+		goto out_vidh;
+	}
+
+	ubi_free_vid_hdr(ubi, vidh);
+	kfree(ech);
+
+	return si;
+
+out_vidh:
+	ubi_free_vid_hdr(ubi, vidh);
+out_ech:
+	kfree(ech);
+out_si:
+	ubi_scan_destroy_si(si);
+	return ERR_PTR(err);
+}
+
+/**
+ * destroy_sv - free the scanning volume information
+ * @sv: scanning volume information
+ *
+ * This function destroys the volume RB-tree (@sv->root) and the scanning
+ * volume information.
+ */
+static void destroy_sv(struct ubi_scan_volume *sv)
+{
+	struct ubi_scan_leb *seb;
+	struct rb_node *this = sv->root.rb_node;
+
+	while (this) {
+		if (this->rb_left)
+			this = this->rb_left;
+		else if (this->rb_right)
+			this = this->rb_right;
+		else {
+			seb = rb_entry(this, struct ubi_scan_leb, u.rb);
+			this = rb_parent(this);
+			if (this) {
+				if (this->rb_left == &seb->u.rb)
+					this->rb_left = NULL;
+				else
+					this->rb_right = NULL;
+			}
+
+			kfree(seb);
+		}
+	}
+	kfree(sv);
+}
+
+/**
+ * ubi_scan_destroy_si - destroy scanning information.
+ * @si: scanning information
+ */
+void ubi_scan_destroy_si(struct ubi_scan_info *si)
+{
+	struct ubi_scan_leb *seb, *seb_tmp;
+	struct ubi_scan_volume *sv;
+	struct rb_node *rb;
+
+	list_for_each_entry_safe(seb, seb_tmp, &si->alien, u.list) {
+		list_del(&seb->u.list);
+		kfree(seb);
+	}
+	list_for_each_entry_safe(seb, seb_tmp, &si->erase, u.list) {
+		list_del(&seb->u.list);
+		kfree(seb);
+	}
+	list_for_each_entry_safe(seb, seb_tmp, &si->corr, u.list) {
+		list_del(&seb->u.list);
+		kfree(seb);
+	}
+	list_for_each_entry_safe(seb, seb_tmp, &si->free, u.list) {
+		list_del(&seb->u.list);
+		kfree(seb);
+	}
+
+	/* Destroy the volume RB-tree */
+	rb = si->volumes.rb_node;
+	while (rb) {
+		if (rb->rb_left)
+			rb = rb->rb_left;
+		else if (rb->rb_right)
+			rb = rb->rb_right;
+		else {
+			sv = rb_entry(rb, struct ubi_scan_volume, rb);
+
+			rb = rb_parent(rb);
+			if (rb) {
+				if (rb->rb_left == &sv->rb)
+					rb->rb_left = NULL;
+				else
+					rb->rb_right = NULL;
+			}
+
+			destroy_sv(sv);
+		}
+	}
+
+	kfree(si);
+}
+
+#ifdef CONFIG_MTD_UBI_DEBUG_PARANOID
+
+/**
+ * paranoid_check_si - check if the scanning information is correct and
+ * consistent.
+ * @ubi: UBI device description object
+ * @si: scanning information
+ *
+ * This function returns zero if the scanning information is all right, %1 if
+ * not and a negative error code if an error occurred.
+ */
+static int paranoid_check_si(struct ubi_device *ubi, struct ubi_scan_info *si)
+{
+	int pnum, err, vols_found = 0;
+	struct rb_node *rb1, *rb2;
+	struct ubi_scan_volume *sv;
+	struct ubi_scan_leb *seb, *last_seb;
+	uint8_t *buf;
+
+	/*
+	 * At first, check that scanning information is OK.
+	 */
+	ubi_rb_for_each_entry(rb1, sv, &si->volumes, rb) {
+		int leb_count = 0;
+
+		cond_resched();
+
+		vols_found += 1;
+
+		if (si->is_empty) {
+			ubi_err("bad is_empty flag");
+			goto bad_sv;
+		}
+
+		if (sv->vol_id < 0 || sv->highest_lnum < 0 ||
+		    sv->leb_count < 0 || sv->vol_type < 0 || sv->used_ebs < 0 ||
+		    sv->data_pad < 0 || sv->last_data_size < 0) {
+			ubi_err("negative values");
+			goto bad_sv;
+		}
+
+		if (sv->vol_id >= UBI_MAX_VOLUMES &&
+		    sv->vol_id < UBI_INTERNAL_VOL_START) {
+			ubi_err("bad vol_id");
+			goto bad_sv;
+		}
+
+		if (sv->vol_id > si->highest_vol_id) {
+			ubi_err("highest_vol_id is %d, but vol_id %d is there",
+				si->highest_vol_id, sv->vol_id);
+			goto out;
+		}
+
+		if (sv->vol_type != UBI_DYNAMIC_VOLUME &&
+		    sv->vol_type != UBI_STATIC_VOLUME) {
+			ubi_err("bad vol_type");
+			goto bad_sv;
+		}
+
+		if (sv->data_pad > ubi->leb_size / 2) {
+			ubi_err("bad data_pad");
+			goto bad_sv;
+		}
+
+		last_seb = NULL;
+		ubi_rb_for_each_entry(rb2, seb, &sv->root, u.rb) {
+			cond_resched();
+
+			last_seb = seb;
+			leb_count += 1;
+
+			if (seb->pnum < 0 || seb->ec < 0) {
+				ubi_err("negative values");
+				goto bad_seb;
+			}
+
+			if (seb->ec < si->min_ec) {
+				ubi_err("bad si->min_ec (%d), %d found",
+					si->min_ec, seb->ec);
+				goto bad_seb;
+			}
+
+			if (seb->ec > si->max_ec) {
+				ubi_err("bad si->max_ec (%d), %d found",
+					si->max_ec, seb->ec);
+				goto bad_seb;
+			}
+
+			if (seb->pnum >= ubi->peb_count) {
+				ubi_err("too high PEB number %d, total PEBs %d",
+					seb->pnum, ubi->peb_count);
+				goto bad_seb;
+			}
+
+			if (sv->vol_type == UBI_STATIC_VOLUME) {
+				if (seb->lnum >= sv->used_ebs) {
+					ubi_err("bad lnum or used_ebs");
+					goto bad_seb;
+				}
+			} else {
+				if (sv->used_ebs != 0) {
+					ubi_err("non-zero used_ebs");
+					goto bad_seb;
+				}
+			}
+
+			if (seb->lnum > sv->highest_lnum) {
+				ubi_err("incorrect highest_lnum or lnum");
+				goto bad_seb;
+			}
+		}
+
+		if (sv->leb_count != leb_count) {
+			ubi_err("bad leb_count, %d objects in the tree",
+				leb_count);
+			goto bad_sv;
+		}
+
+		if (!last_seb)
+			continue;
+
+		seb = last_seb;
+
+		if (seb->lnum != sv->highest_lnum) {
+			ubi_err("bad highest_lnum");
+			goto bad_seb;
+		}
+	}
+
+	if (vols_found != si->vols_found) {
+		ubi_err("bad si->vols_found %d, should be %d",
+			si->vols_found, vols_found);
+		goto out;
+	}
+
+	/* Check that scanning information is correct */
+	ubi_rb_for_each_entry(rb1, sv, &si->volumes, rb) {
+		last_seb = NULL;
+		ubi_rb_for_each_entry(rb2, seb, &sv->root, u.rb) {
+			int vol_type;
+
+			cond_resched();
+
+			last_seb = seb;
+
+			err = ubi_io_read_vid_hdr(ubi, seb->pnum, vidh, 1);
+			if (err && err != UBI_IO_BITFLIPS) {
+				ubi_err("VID header is not OK (%d)", err);
+				if (err > 0)
+					err = -EIO;
+				return err;
+			}
+
+			vol_type = vidh->vol_type == UBI_VID_DYNAMIC ?
+				   UBI_DYNAMIC_VOLUME : UBI_STATIC_VOLUME;
+			if (sv->vol_type != vol_type) {
+				ubi_err("bad vol_type");
+				goto bad_vid_hdr;
+			}
+
+			if (seb->sqnum != be64_to_cpu(vidh->sqnum)) {
+				ubi_err("bad sqnum %llu", seb->sqnum);
+				goto bad_vid_hdr;
+			}
+
+			if (sv->vol_id != be32_to_cpu(vidh->vol_id)) {
+				ubi_err("bad vol_id %d", sv->vol_id);
+				goto bad_vid_hdr;
+			}
+
+			if (sv->compat != vidh->compat) {
+				ubi_err("bad compat %d", vidh->compat);
+				goto bad_vid_hdr;
+			}
+
+			if (seb->lnum != be32_to_cpu(vidh->lnum)) {
+				ubi_err("bad lnum %d", seb->lnum);
+				goto bad_vid_hdr;
+			}
+
+			if (sv->used_ebs != be32_to_cpu(vidh->used_ebs)) {
+				ubi_err("bad used_ebs %d", sv->used_ebs);
+				goto bad_vid_hdr;
+			}
+
+			if (sv->data_pad != be32_to_cpu(vidh->data_pad)) {
+				ubi_err("bad data_pad %d", sv->data_pad);
+				goto bad_vid_hdr;
+			}
+
+			if (seb->leb_ver != be32_to_cpu(vidh->leb_ver)) {
+				ubi_err("bad leb_ver %u", seb->leb_ver);
+				goto bad_vid_hdr;
+			}
+		}
+
+		if (!last_seb)
+			continue;
+
+		if (sv->highest_lnum != be32_to_cpu(vidh->lnum)) {
+			ubi_err("bad highest_lnum %d", sv->highest_lnum);
+			goto bad_vid_hdr;
+		}
+
+		if (sv->last_data_size != be32_to_cpu(vidh->data_size)) {
+			ubi_err("bad last_data_size %d", sv->last_data_size);
+			goto bad_vid_hdr;
+		}
+	}
+
+	/*
+	 * Make sure that all the physical eraseblocks are in one of the lists
+	 * or trees.
+	 */
+	buf = kzalloc(ubi->peb_count, GFP_KERNEL);
+	if (!buf)
+		return -ENOMEM;
+
+	for (pnum = 0; pnum < ubi->peb_count; pnum++) {
+		err = ubi_io_is_bad(ubi, pnum);
+		if (err < 0) {
+			kfree(buf);
+			return err;
+		}
+		else if (err)
+			buf[pnum] = 1;
+	}
+
+	ubi_rb_for_each_entry(rb1, sv, &si->volumes, rb)
+		ubi_rb_for_each_entry(rb2, seb, &sv->root, u.rb)
+			buf[seb->pnum] = 1;
+
+	list_for_each_entry(seb, &si->free, u.list)
+		buf[seb->pnum] = 1;
+
+	list_for_each_entry(seb, &si->corr, u.list)
+		buf[seb->pnum] = 1;
+
+	list_for_each_entry(seb, &si->erase, u.list)
+		buf[seb->pnum] = 1;
+
+	list_for_each_entry(seb, &si->alien, u.list)
+		buf[seb->pnum] = 1;
+
+	err = 0;
+	for (pnum = 0; pnum < ubi->peb_count; pnum++)
+		if (!buf[pnum]) {
+			ubi_err("PEB %d is not referred", pnum);
+			err = 1;
+		}
+
+	kfree(buf);
+	if (err)
+		goto out;
+	return 0;
+
+bad_seb:
+	ubi_err("bad scanning information about LEB %d", seb->lnum);
+	ubi_dbg_dump_seb(seb, 0);
+	ubi_dbg_dump_sv(sv);
+	goto out;
+
+bad_sv:
+	ubi_err("bad scanning information about volume %d", sv->vol_id);
+	ubi_dbg_dump_sv(sv);
+	goto out;
+
+bad_vid_hdr:
+	ubi_err("bad scanning information about volume %d", sv->vol_id);
+	ubi_dbg_dump_sv(sv);
+	ubi_dbg_dump_vid_hdr(vidh);
+
+out:
+	ubi_dbg_dump_stack();
+	return 1;
+}
+
+#endif /* CONFIG_MTD_UBI_DEBUG_PARANOID */
diff --git a/drivers/mtd/ubi/scan.h b/drivers/mtd/ubi/scan.h
new file mode 100644
index 000000000..966b9b682
--- /dev/null
+++ b/drivers/mtd/ubi/scan.h
@@ -0,0 +1,165 @@
+/*
+ * Copyright (c) International Business Machines Corp., 2006
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ * Author: Artem Bityutskiy (Битюцкий �ртём)
+ */
+
+#ifndef __UBI_SCAN_H__
+#define __UBI_SCAN_H__
+
+/* The erase counter value for this physical eraseblock is unknown */
+#define UBI_SCAN_UNKNOWN_EC (-1)
+
+/**
+ * struct ubi_scan_leb - scanning information about a physical eraseblock.
+ * @ec: erase counter (%UBI_SCAN_UNKNOWN_EC if it is unknown)
+ * @pnum: physical eraseblock number
+ * @lnum: logical eraseblock number
+ * @scrub: if this physical eraseblock needs scrubbing
+ * @sqnum: sequence number
+ * @u: unions RB-tree or @list links
+ * @u.rb: link in the per-volume RB-tree of &struct ubi_scan_leb objects
+ * @u.list: link in one of the eraseblock lists
+ * @leb_ver: logical eraseblock version (obsolete)
+ *
+ * One object of this type is allocated for each physical eraseblock during
+ * scanning.
+ */
+struct ubi_scan_leb {
+	int ec;
+	int pnum;
+	int lnum;
+	int scrub;
+	unsigned long long sqnum;
+	union {
+		struct rb_node rb;
+		struct list_head list;
+	} u;
+	uint32_t leb_ver;
+};
+
+/**
+ * struct ubi_scan_volume - scanning information about a volume.
+ * @vol_id: volume ID
+ * @highest_lnum: highest logical eraseblock number in this volume
+ * @leb_count: number of logical eraseblocks in this volume
+ * @vol_type: volume type
+ * @used_ebs: number of used logical eraseblocks in this volume (only for
+ * static volumes)
+ * @last_data_size: amount of data in the last logical eraseblock of this
+ * volume (always equivalent to the usable logical eraseblock size in case of
+ * dynamic volumes)
+ * @data_pad: how many bytes at the end of logical eraseblocks of this volume
+ * are not used (due to volume alignment)
+ * @compat: compatibility flags of this volume
+ * @rb: link in the volume RB-tree
+ * @root: root of the RB-tree containing all the eraseblock belonging to this
+ * volume (&struct ubi_scan_leb objects)
+ *
+ * One object of this type is allocated for each volume during scanning.
+ */
+struct ubi_scan_volume {
+	int vol_id;
+	int highest_lnum;
+	int leb_count;
+	int vol_type;
+	int used_ebs;
+	int last_data_size;
+	int data_pad;
+	int compat;
+	struct rb_node rb;
+	struct rb_root root;
+};
+
+/**
+ * struct ubi_scan_info - UBI scanning information.
+ * @volumes: root of the volume RB-tree
+ * @corr: list of corrupted physical eraseblocks
+ * @free: list of free physical eraseblocks
+ * @erase: list of physical eraseblocks which have to be erased
+ * @alien: list of physical eraseblocks which should not be used by UBI (e.g.,
+ * @bad_peb_count: count of bad physical eraseblocks
+ * those belonging to "preserve"-compatible internal volumes)
+ * @vols_found: number of volumes found during scanning
+ * @highest_vol_id: highest volume ID
+ * @alien_peb_count: count of physical eraseblocks in the @alien list
+ * @is_empty: flag indicating whether the MTD device is empty or not
+ * @min_ec: lowest erase counter value
+ * @max_ec: highest erase counter value
+ * @max_sqnum: highest sequence number value
+ * @mean_ec: mean erase counter value
+ * @ec_sum: a temporary variable used when calculating @mean_ec
+ * @ec_count: a temporary variable used when calculating @mean_ec
+ *
+ * This data structure contains the result of scanning and may be used by other
+ * UBI units to build final UBI data structures, further error-recovery and so
+ * on.
+ */
+struct ubi_scan_info {
+	struct rb_root volumes;
+	struct list_head corr;
+	struct list_head free;
+	struct list_head erase;
+	struct list_head alien;
+	int bad_peb_count;
+	int vols_found;
+	int highest_vol_id;
+	int alien_peb_count;
+	int is_empty;
+	int min_ec;
+	int max_ec;
+	unsigned long long max_sqnum;
+	int mean_ec;
+	uint64_t ec_sum;
+	int ec_count;
+};
+
+struct ubi_device;
+struct ubi_vid_hdr;
+
+/*
+ * ubi_scan_move_to_list - move a physical eraseblock from the volume tree to a
+ * list.
+ *
+ * @sv: volume scanning information
+ * @seb: scanning eraseblock infprmation
+ * @list: the list to move to
+ */
+static inline void ubi_scan_move_to_list(struct ubi_scan_volume *sv,
+					 struct ubi_scan_leb *seb,
+					 struct list_head *list)
+{
+		rb_erase(&seb->u.rb, &sv->root);
+		list_add_tail(&seb->u.list, list);
+}
+
+int ubi_scan_add_used(struct ubi_device *ubi, struct ubi_scan_info *si,
+		      int pnum, int ec, const struct ubi_vid_hdr *vid_hdr,
+		      int bitflips);
+struct ubi_scan_volume *ubi_scan_find_sv(const struct ubi_scan_info *si,
+					 int vol_id);
+struct ubi_scan_leb *ubi_scan_find_seb(const struct ubi_scan_volume *sv,
+				       int lnum);
+void ubi_scan_rm_volume(struct ubi_scan_info *si, struct ubi_scan_volume *sv);
+struct ubi_scan_leb *ubi_scan_get_free_peb(struct ubi_device *ubi,
+					   struct ubi_scan_info *si);
+int ubi_scan_erase_peb(struct ubi_device *ubi, const struct ubi_scan_info *si,
+		       int pnum, int ec);
+struct ubi_scan_info *ubi_scan(struct ubi_device *ubi);
+void ubi_scan_destroy_si(struct ubi_scan_info *si);
+
+#endif /* !__UBI_SCAN_H__ */
diff --git a/include/linux/mtd/ubi-header.h b/drivers/mtd/ubi/ubi-media.h
index fa479c71a..c3185d9fd 100644
--- a/include/linux/mtd/ubi-header.h
+++ b/drivers/mtd/ubi/ubi-media.h
@@ -24,11 +24,11 @@
 
 /*
  * This file defines the layout of UBI headers and all the other UBI on-flash
- * data structures. May be included by user-space.
+ * data structures.
  */
 
-#ifndef __UBI_HEADER_H__
-#define __UBI_HEADER_H__
+#ifndef __UBI_MEDIA_H__
+#define __UBI_MEDIA_H__
 
 #include <asm/byteorder.h>
 
@@ -58,6 +58,43 @@ enum {
 };
 
 /*
+ * Volume flags used in the volume table record.
+ *
+ * @UBI_VTBL_AUTORESIZE_FLG: auto-resize this volume
+ *
+ * %UBI_VTBL_AUTORESIZE_FLG flag can be set only for one volume in the volume
+ * table. UBI automatically re-sizes the volume which has this flag and makes
+ * the volume to be of largest possible size. This means that if after the
+ * initialization UBI finds out that there are available physical eraseblocks
+ * present on the device, it automatically appends all of them to the volume
+ * (the physical eraseblocks reserved for bad eraseblocks handling and other
+ * reserved physical eraseblocks are not taken). So, if there is a volume with
+ * the %UBI_VTBL_AUTORESIZE_FLG flag set, the amount of available logical
+ * eraseblocks will be zero after UBI is loaded, because all of them will be
+ * reserved for this volume. Note, the %UBI_VTBL_AUTORESIZE_FLG bit is cleared
+ * after the volume had been initialized.
+ *
+ * The auto-resize feature is useful for device production purposes. For
+ * example, different NAND flash chips may have different amount of initial bad
+ * eraseblocks, depending of particular chip instance. Manufacturers of NAND
+ * chips usually guarantee that the amount of initial bad eraseblocks does not
+ * exceed certain percent, e.g. 2%. When one creates an UBI image which will be
+ * flashed to the end devices in production, he does not know the exact amount
+ * of good physical eraseblocks the NAND chip on the device will have, but this
+ * number is required to calculate the volume sized and put them to the volume
+ * table of the UBI image. In this case, one of the volumes (e.g., the one
+ * which will store the root file system) is marked as "auto-resizable", and
+ * UBI will adjust its size on the first boot if needed.
+ *
+ * Note, first UBI reserves some amount of physical eraseblocks for bad
+ * eraseblock handling, and then re-sizes the volume, not vice-versa. This
+ * means that the pool of reserved physical eraseblocks will always be present.
+ */
+enum {
+	UBI_VTBL_AUTORESIZE_FLG = 0x01,
+};
+
+/*
  * Compatibility constants used by internal volumes.
  *
  * @UBI_COMPAT_DELETE: delete this internal volume before anything is written
@@ -74,42 +111,13 @@ enum {
 	UBI_COMPAT_REJECT   = 5
 };
 
-/*
- * ubi16_t/ubi32_t/ubi64_t - 16, 32, and 64-bit integers used in UBI on-flash
- * data structures.
- */
-typedef struct {
-	uint16_t int16;
-} __attribute__ ((packed)) ubi16_t;
-
-typedef struct {
-	uint32_t int32;
-} __attribute__ ((packed)) ubi32_t;
-
-typedef struct {
-	uint64_t int64;
-} __attribute__ ((packed)) ubi64_t;
-
-/*
- * In this implementation of UBI uses the big-endian format for on-flash
- * integers. The below are the corresponding conversion macros.
- */
-#define cpu_to_ubi16(x) ((ubi16_t){__cpu_to_be16(x)})
-#define ubi16_to_cpu(x) ((uint16_t)__be16_to_cpu((x).int16))
-
-#define cpu_to_ubi32(x) ((ubi32_t){__cpu_to_be32(x)})
-#define ubi32_to_cpu(x) ((uint32_t)__be32_to_cpu((x).int32))
-
-#define cpu_to_ubi64(x) ((ubi64_t){__cpu_to_be64(x)})
-#define ubi64_to_cpu(x) ((uint64_t)__be64_to_cpu((x).int64))
-
 /* Sizes of UBI headers */
 #define UBI_EC_HDR_SIZE  sizeof(struct ubi_ec_hdr)
 #define UBI_VID_HDR_SIZE sizeof(struct ubi_vid_hdr)
 
 /* Sizes of UBI headers without the ending CRC */
-#define UBI_EC_HDR_SIZE_CRC  (UBI_EC_HDR_SIZE  - sizeof(ubi32_t))
-#define UBI_VID_HDR_SIZE_CRC (UBI_VID_HDR_SIZE - sizeof(ubi32_t))
+#define UBI_EC_HDR_SIZE_CRC  (UBI_EC_HDR_SIZE  - sizeof(__be32))
+#define UBI_VID_HDR_SIZE_CRC (UBI_VID_HDR_SIZE - sizeof(__be32))
 
 /**
  * struct ubi_ec_hdr - UBI erase counter header.
@@ -137,14 +145,14 @@ typedef struct {
  * eraseblocks.
  */
 struct ubi_ec_hdr {
-	ubi32_t magic;
-	uint8_t version;
-	uint8_t padding1[3];
-	ubi64_t ec; /* Warning: the current limit is 31-bit anyway! */
-	ubi32_t vid_hdr_offset;
-	ubi32_t data_offset;
-	uint8_t padding2[36];
-	ubi32_t hdr_crc;
+	__be32  magic;
+	__u8    version;
+	__u8    padding1[3];
+	__be64  ec; /* Warning: the current limit is 31-bit anyway! */
+	__be32  vid_hdr_offset;
+	__be32  data_offset;
+	__u8    padding2[36];
+	__be32  hdr_crc;
 } __attribute__ ((packed));
 
 /**
@@ -262,22 +270,22 @@ struct ubi_ec_hdr {
  * software (say, cramfs) on top of the UBI volume.
  */
 struct ubi_vid_hdr {
-	ubi32_t magic;
-	uint8_t version;
-	uint8_t vol_type;
-	uint8_t copy_flag;
-	uint8_t compat;
-	ubi32_t vol_id;
-	ubi32_t lnum;
-	ubi32_t leb_ver; /* obsolete, to be removed, don't use */
-	ubi32_t data_size;
-	ubi32_t used_ebs;
-	ubi32_t data_pad;
-	ubi32_t data_crc;
-	uint8_t padding1[4];
-	ubi64_t sqnum;
-	uint8_t padding2[12];
-	ubi32_t hdr_crc;
+	__be32  magic;
+	__u8    version;
+	__u8    vol_type;
+	__u8    copy_flag;
+	__u8    compat;
+	__be32  vol_id;
+	__be32  lnum;
+	__be32  leb_ver; /* obsolete, to be removed, don't use */
+	__be32  data_size;
+	__be32  used_ebs;
+	__be32  data_pad;
+	__be32  data_crc;
+	__u8    padding1[4];
+	__be64  sqnum;
+	__u8    padding2[12];
+	__be32  hdr_crc;
 } __attribute__ ((packed));
 
 /* Internal UBI volumes count */
@@ -291,7 +299,9 @@ struct ubi_vid_hdr {
 
 /* The layout volume contains the volume table */
 
-#define UBI_LAYOUT_VOL_ID        UBI_INTERNAL_VOL_START
+#define UBI_LAYOUT_VOLUME_ID     UBI_INTERNAL_VOL_START
+#define UBI_LAYOUT_VOLUME_TYPE   UBI_VID_DYNAMIC
+#define UBI_LAYOUT_VOLUME_ALIGN  1
 #define UBI_LAYOUT_VOLUME_EBS    2
 #define UBI_LAYOUT_VOLUME_NAME   "layout volume"
 #define UBI_LAYOUT_VOLUME_COMPAT UBI_COMPAT_REJECT
@@ -306,7 +316,7 @@ struct ubi_vid_hdr {
 #define UBI_VTBL_RECORD_SIZE sizeof(struct ubi_vtbl_record)
 
 /* Size of the volume table record without the ending CRC */
-#define UBI_VTBL_RECORD_SIZE_CRC (UBI_VTBL_RECORD_SIZE - sizeof(ubi32_t))
+#define UBI_VTBL_RECORD_SIZE_CRC (UBI_VTBL_RECORD_SIZE - sizeof(__be32))
 
 /**
  * struct ubi_vtbl_record - a record in the volume table.
@@ -318,7 +328,8 @@ struct ubi_vid_hdr {
  * @upd_marker: if volume update was started but not finished
  * @name_len: volume name length
  * @name: the volume name
- * @padding2: reserved, zeroes
+ * @flags: volume flags (%UBI_VTBL_AUTORESIZE_FLG)
+ * @padding: reserved, zeroes
  * @crc: a CRC32 checksum of the record
  *
  * The volume table records are stored in the volume table, which is stored in
@@ -346,15 +357,16 @@ struct ubi_vid_hdr {
  * Empty records contain all zeroes and the CRC checksum of those zeroes.
  */
 struct ubi_vtbl_record {
-	ubi32_t reserved_pebs;
-	ubi32_t alignment;
-	ubi32_t data_pad;
-	uint8_t vol_type;
-	uint8_t upd_marker;
-	ubi16_t name_len;
-	uint8_t name[UBI_VOL_NAME_MAX+1];
-	uint8_t padding2[24];
-	ubi32_t crc;
+	__be32  reserved_pebs;
+	__be32  alignment;
+	__be32  data_pad;
+	__u8    vol_type;
+	__u8    upd_marker;
+	__be16  name_len;
+	__u8    name[UBI_VOL_NAME_MAX+1];
+	__u8    flags;
+	__u8    padding[23];
+	__be32  crc;
 } __attribute__ ((packed));
 
-#endif /* !__UBI_HEADER_H__ */
+#endif /* !__UBI_MEDIA_H__ */
diff --git a/drivers/mtd/ubi/ubi.h b/drivers/mtd/ubi/ubi.h
new file mode 100644
index 000000000..bf77a1574
--- /dev/null
+++ b/drivers/mtd/ubi/ubi.h
@@ -0,0 +1,641 @@
+/*
+ * Copyright (c) International Business Machines Corp., 2006
+ * Copyright (c) Nokia Corporation, 2006, 2007
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ * Author: Artem Bityutskiy (Битюцкий �ртём)
+ */
+
+#ifndef __UBI_UBI_H__
+#define __UBI_UBI_H__
+
+#ifdef UBI_LINUX
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/list.h>
+#include <linux/rbtree.h>
+#include <linux/sched.h>
+#include <linux/wait.h>
+#include <linux/mutex.h>
+#include <linux/rwsem.h>
+#include <linux/spinlock.h>
+#include <linux/fs.h>
+#include <linux/cdev.h>
+#include <linux/device.h>
+#include <linux/string.h>
+#include <linux/vmalloc.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/ubi.h>
+#endif
+
+#include <linux/types.h>
+#include <linux/list.h>
+#include <linux/rbtree.h>
+#include <linux/string.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/ubi.h>
+
+#include "ubi-media.h"
+#include "scan.h"
+#include "debug.h"
+
+/* Maximum number of supported UBI devices */
+#define UBI_MAX_DEVICES 32
+
+/* UBI name used for character devices, sysfs, etc */
+#define UBI_NAME_STR "ubi"
+
+/* Normal UBI messages */
+#define ubi_msg(fmt, ...) printk(KERN_NOTICE "UBI: " fmt "\n", ##__VA_ARGS__)
+/* UBI warning messages */
+#define ubi_warn(fmt, ...) printk(KERN_WARNING "UBI warning: %s: " fmt "\n", \
+				  __func__, ##__VA_ARGS__)
+/* UBI error messages */
+#define ubi_err(fmt, ...) printk(KERN_ERR "UBI error: %s: " fmt "\n", \
+				 __func__, ##__VA_ARGS__)
+
+/* Lowest number PEBs reserved for bad PEB handling */
+#define MIN_RESEVED_PEBS 2
+
+/* Background thread name pattern */
+#define UBI_BGT_NAME_PATTERN "ubi_bgt%dd"
+
+/* This marker in the EBA table means that the LEB is um-mapped */
+#define UBI_LEB_UNMAPPED -1
+
+/*
+ * In case of errors, UBI tries to repeat the operation several times before
+ * returning error. The below constant defines how many times UBI re-tries.
+ */
+#define UBI_IO_RETRIES 3
+
+/*
+ * Error codes returned by the I/O unit.
+ *
+ * UBI_IO_PEB_EMPTY: the physical eraseblock is empty, i.e. it contains only
+ * 0xFF bytes
+ * UBI_IO_PEB_FREE: the physical eraseblock is free, i.e. it contains only a
+ * valid erase counter header, and the rest are %0xFF bytes
+ * UBI_IO_BAD_EC_HDR: the erase counter header is corrupted (bad magic or CRC)
+ * UBI_IO_BAD_VID_HDR: the volume identifier header is corrupted (bad magic or
+ * CRC)
+ * UBI_IO_BITFLIPS: bit-flips were detected and corrected
+ */
+enum {
+	UBI_IO_PEB_EMPTY = 1,
+	UBI_IO_PEB_FREE,
+	UBI_IO_BAD_EC_HDR,
+	UBI_IO_BAD_VID_HDR,
+	UBI_IO_BITFLIPS
+};
+
+/**
+ * struct ubi_wl_entry - wear-leveling entry.
+ * @rb: link in the corresponding RB-tree
+ * @ec: erase counter
+ * @pnum: physical eraseblock number
+ *
+ * This data structure is used in the WL unit. Each physical eraseblock has a
+ * corresponding &struct wl_entry object which may be kept in different
+ * RB-trees. See WL unit for details.
+ */
+struct ubi_wl_entry {
+	struct rb_node rb;
+	int ec;
+	int pnum;
+};
+
+/**
+ * struct ubi_ltree_entry - an entry in the lock tree.
+ * @rb: links RB-tree nodes
+ * @vol_id: volume ID of the locked logical eraseblock
+ * @lnum: locked logical eraseblock number
+ * @users: how many tasks are using this logical eraseblock or wait for it
+ * @mutex: read/write mutex to implement read/write access serialization to
+ *         the (@vol_id, @lnum) logical eraseblock
+ *
+ * This data structure is used in the EBA unit to implement per-LEB locking.
+ * When a logical eraseblock is being locked - corresponding
+ * &struct ubi_ltree_entry object is inserted to the lock tree (@ubi->ltree).
+ * See EBA unit for details.
+ */
+struct ubi_ltree_entry {
+	struct rb_node rb;
+	int vol_id;
+	int lnum;
+	int users;
+	struct rw_semaphore mutex;
+};
+
+struct ubi_volume_desc;
+
+/**
+ * struct ubi_volume - UBI volume description data structure.
+ * @dev: device object to make use of the the Linux device model
+ * @cdev: character device object to create character device
+ * @ubi: reference to the UBI device description object
+ * @vol_id: volume ID
+ * @ref_count: volume reference count
+ * @readers: number of users holding this volume in read-only mode
+ * @writers: number of users holding this volume in read-write mode
+ * @exclusive: whether somebody holds this volume in exclusive mode
+ *
+ * @reserved_pebs: how many physical eraseblocks are reserved for this volume
+ * @vol_type: volume type (%UBI_DYNAMIC_VOLUME or %UBI_STATIC_VOLUME)
+ * @usable_leb_size: logical eraseblock size without padding
+ * @used_ebs: how many logical eraseblocks in this volume contain data
+ * @last_eb_bytes: how many bytes are stored in the last logical eraseblock
+ * @used_bytes: how many bytes of data this volume contains
+ * @alignment: volume alignment
+ * @data_pad: how many bytes are not used at the end of physical eraseblocks to
+ *            satisfy the requested alignment
+ * @name_len: volume name length
+ * @name: volume name
+ *
+ * @upd_ebs: how many eraseblocks are expected to be updated
+ * @ch_lnum: LEB number which is being changing by the atomic LEB change
+ *           operation
+ * @ch_dtype: data persistency type which is being changing by the atomic LEB
+ *            change operation
+ * @upd_bytes: how many bytes are expected to be received for volume update or
+ *             atomic LEB change
+ * @upd_received: how many bytes were already received for volume update or
+ *                atomic LEB change
+ * @upd_buf: update buffer which is used to collect update data or data for
+ *           atomic LEB change
+ *
+ * @eba_tbl: EBA table of this volume (LEB->PEB mapping)
+ * @checked: %1 if this static volume was checked
+ * @corrupted: %1 if the volume is corrupted (static volumes only)
+ * @upd_marker: %1 if the update marker is set for this volume
+ * @updating: %1 if the volume is being updated
+ * @changing_leb: %1 if the atomic LEB change ioctl command is in progress
+ *
+ * @gluebi_desc: gluebi UBI volume descriptor
+ * @gluebi_refcount: reference count of the gluebi MTD device
+ * @gluebi_mtd: MTD device description object of the gluebi MTD device
+ *
+ * The @corrupted field indicates that the volume's contents is corrupted.
+ * Since UBI protects only static volumes, this field is not relevant to
+ * dynamic volumes - it is user's responsibility to assure their data
+ * integrity.
+ *
+ * The @upd_marker flag indicates that this volume is either being updated at
+ * the moment or is damaged because of an unclean reboot.
+ */
+struct ubi_volume {
+	struct device dev;
+	struct cdev cdev;
+	struct ubi_device *ubi;
+	int vol_id;
+	int ref_count;
+	int readers;
+	int writers;
+	int exclusive;
+
+	int reserved_pebs;
+	int vol_type;
+	int usable_leb_size;
+	int used_ebs;
+	int last_eb_bytes;
+	long long used_bytes;
+	int alignment;
+	int data_pad;
+	int name_len;
+	char name[UBI_VOL_NAME_MAX+1];
+
+	int upd_ebs;
+	int ch_lnum;
+	int ch_dtype;
+	long long upd_bytes;
+	long long upd_received;
+	void *upd_buf;
+
+	int *eba_tbl;
+	unsigned int checked:1;
+	unsigned int corrupted:1;
+	unsigned int upd_marker:1;
+	unsigned int updating:1;
+	unsigned int changing_leb:1;
+
+#ifdef CONFIG_MTD_UBI_GLUEBI
+	/*
+	 * Gluebi-related stuff may be compiled out.
+	 * TODO: this should not be built into UBI but should be a separate
+	 * ubimtd driver which works on top of UBI and emulates MTD devices.
+	 */
+	struct ubi_volume_desc *gluebi_desc;
+	int gluebi_refcount;
+	struct mtd_info gluebi_mtd;
+#endif
+};
+
+/**
+ * struct ubi_volume_desc - descriptor of the UBI volume returned when it is
+ * opened.
+ * @vol: reference to the corresponding volume description object
+ * @mode: open mode (%UBI_READONLY, %UBI_READWRITE, or %UBI_EXCLUSIVE)
+ */
+struct ubi_volume_desc {
+	struct ubi_volume *vol;
+	int mode;
+};
+
+struct ubi_wl_entry;
+
+/**
+ * struct ubi_device - UBI device description structure
+ * @dev: UBI device object to use the the Linux device model
+ * @cdev: character device object to create character device
+ * @ubi_num: UBI device number
+ * @ubi_name: UBI device name
+ * @vol_count: number of volumes in this UBI device
+ * @volumes: volumes of this UBI device
+ * @volumes_lock: protects @volumes, @rsvd_pebs, @avail_pebs, beb_rsvd_pebs,
+ *                @beb_rsvd_level, @bad_peb_count, @good_peb_count, @vol_count,
+ *                @vol->readers, @vol->writers, @vol->exclusive,
+ *                @vol->ref_count, @vol->mapping and @vol->eba_tbl.
+ * @ref_count: count of references on the UBI device
+ *
+ * @rsvd_pebs: count of reserved physical eraseblocks
+ * @avail_pebs: count of available physical eraseblocks
+ * @beb_rsvd_pebs: how many physical eraseblocks are reserved for bad PEB
+ *                 handling
+ * @beb_rsvd_level: normal level of PEBs reserved for bad PEB handling
+ *
+ * @autoresize_vol_id: ID of the volume which has to be auto-resized at the end
+ *                     of UBI ititializetion
+ * @vtbl_slots: how many slots are available in the volume table
+ * @vtbl_size: size of the volume table in bytes
+ * @vtbl: in-RAM volume table copy
+ * @volumes_mutex: protects on-flash volume table and serializes volume
+ *                 changes, like creation, deletion, update, resize
+ *
+ * @max_ec: current highest erase counter value
+ * @mean_ec: current mean erase counter value
+ *
+ * @global_sqnum: global sequence number
+ * @ltree_lock: protects the lock tree and @global_sqnum
+ * @ltree: the lock tree
+ * @alc_mutex: serializes "atomic LEB change" operations
+ *
+ * @used: RB-tree of used physical eraseblocks
+ * @free: RB-tree of free physical eraseblocks
+ * @scrub: RB-tree of physical eraseblocks which need scrubbing
+ * @prot: protection trees
+ * @prot.pnum: protection tree indexed by physical eraseblock numbers
+ * @prot.aec: protection tree indexed by absolute erase counter value
+ * @wl_lock: protects the @used, @free, @prot, @lookuptbl, @abs_ec, @move_from,
+ *           @move_to, @move_to_put @erase_pending, @wl_scheduled, and @works
+ *           fields
+ * @move_mutex: serializes eraseblock moves
+ * @wl_scheduled: non-zero if the wear-leveling was scheduled
+ * @lookuptbl: a table to quickly find a &struct ubi_wl_entry object for any
+ *             physical eraseblock
+ * @abs_ec: absolute erase counter
+ * @move_from: physical eraseblock from where the data is being moved
+ * @move_to: physical eraseblock where the data is being moved to
+ * @move_to_put: if the "to" PEB was put
+ * @works: list of pending works
+ * @works_count: count of pending works
+ * @bgt_thread: background thread description object
+ * @thread_enabled: if the background thread is enabled
+ * @bgt_name: background thread name
+ *
+ * @flash_size: underlying MTD device size (in bytes)
+ * @peb_count: count of physical eraseblocks on the MTD device
+ * @peb_size: physical eraseblock size
+ * @bad_peb_count: count of bad physical eraseblocks
+ * @good_peb_count: count of good physical eraseblocks
+ * @min_io_size: minimal input/output unit size of the underlying MTD device
+ * @hdrs_min_io_size: minimal I/O unit size used for VID and EC headers
+ * @ro_mode: if the UBI device is in read-only mode
+ * @leb_size: logical eraseblock size
+ * @leb_start: starting offset of logical eraseblocks within physical
+ * eraseblocks
+ * @ec_hdr_alsize: size of the EC header aligned to @hdrs_min_io_size
+ * @vid_hdr_alsize: size of the VID header aligned to @hdrs_min_io_size
+ * @vid_hdr_offset: starting offset of the volume identifier header (might be
+ * unaligned)
+ * @vid_hdr_aloffset: starting offset of the VID header aligned to
+ * @hdrs_min_io_size
+ * @vid_hdr_shift: contains @vid_hdr_offset - @vid_hdr_aloffset
+ * @bad_allowed: whether the MTD device admits of bad physical eraseblocks or
+ *               not
+ * @mtd: MTD device descriptor
+ *
+ * @peb_buf1: a buffer of PEB size used for different purposes
+ * @peb_buf2: another buffer of PEB size used for different purposes
+ * @buf_mutex: proptects @peb_buf1 and @peb_buf2
+ * @dbg_peb_buf: buffer of PEB size used for debugging
+ * @dbg_buf_mutex: proptects @dbg_peb_buf
+ */
+struct ubi_device {
+	struct cdev cdev;
+	struct device dev;
+	int ubi_num;
+	char ubi_name[sizeof(UBI_NAME_STR)+5];
+	int vol_count;
+	struct ubi_volume *volumes[UBI_MAX_VOLUMES+UBI_INT_VOL_COUNT];
+	spinlock_t volumes_lock;
+	int ref_count;
+
+	int rsvd_pebs;
+	int avail_pebs;
+	int beb_rsvd_pebs;
+	int beb_rsvd_level;
+
+	int autoresize_vol_id;
+	int vtbl_slots;
+	int vtbl_size;
+	struct ubi_vtbl_record *vtbl;
+	struct mutex volumes_mutex;
+
+	int max_ec;
+	/* TODO: mean_ec is not updated run-time, fix */
+	int mean_ec;
+
+	/* EBA unit's stuff */
+	unsigned long long global_sqnum;
+	spinlock_t ltree_lock;
+	struct rb_root ltree;
+	struct mutex alc_mutex;
+
+	/* Wear-leveling unit's stuff */
+	struct rb_root used;
+	struct rb_root free;
+	struct rb_root scrub;
+	struct {
+		struct rb_root pnum;
+		struct rb_root aec;
+	} prot;
+	spinlock_t wl_lock;
+	struct mutex move_mutex;
+	struct rw_semaphore work_sem;
+	int wl_scheduled;
+	struct ubi_wl_entry **lookuptbl;
+	unsigned long long abs_ec;
+	struct ubi_wl_entry *move_from;
+	struct ubi_wl_entry *move_to;
+	int move_to_put;
+	struct list_head works;
+	int works_count;
+	struct task_struct *bgt_thread;
+	int thread_enabled;
+	char bgt_name[sizeof(UBI_BGT_NAME_PATTERN)+2];
+
+	/* I/O unit's stuff */
+	long long flash_size;
+	int peb_count;
+	int peb_size;
+	int bad_peb_count;
+	int good_peb_count;
+	int min_io_size;
+	int hdrs_min_io_size;
+	int ro_mode;
+	int leb_size;
+	int leb_start;
+	int ec_hdr_alsize;
+	int vid_hdr_alsize;
+	int vid_hdr_offset;
+	int vid_hdr_aloffset;
+	int vid_hdr_shift;
+	int bad_allowed;
+	struct mtd_info *mtd;
+
+	void *peb_buf1;
+	void *peb_buf2;
+	struct mutex buf_mutex;
+	struct mutex ckvol_mutex;
+#ifdef CONFIG_MTD_UBI_DEBUG
+	void *dbg_peb_buf;
+	struct mutex dbg_buf_mutex;
+#endif
+};
+
+extern struct kmem_cache *ubi_wl_entry_slab;
+extern struct file_operations ubi_ctrl_cdev_operations;
+extern struct file_operations ubi_cdev_operations;
+extern struct file_operations ubi_vol_cdev_operations;
+extern struct class *ubi_class;
+extern struct mutex ubi_devices_mutex;
+
+/* vtbl.c */
+int ubi_change_vtbl_record(struct ubi_device *ubi, int idx,
+			   struct ubi_vtbl_record *vtbl_rec);
+int ubi_read_volume_table(struct ubi_device *ubi, struct ubi_scan_info *si);
+
+/* vmt.c */
+int ubi_create_volume(struct ubi_device *ubi, struct ubi_mkvol_req *req);
+int ubi_remove_volume(struct ubi_volume_desc *desc);
+int ubi_resize_volume(struct ubi_volume_desc *desc, int reserved_pebs);
+int ubi_add_volume(struct ubi_device *ubi, struct ubi_volume *vol);
+void ubi_free_volume(struct ubi_device *ubi, struct ubi_volume *vol);
+
+/* upd.c */
+int ubi_start_update(struct ubi_device *ubi, struct ubi_volume *vol,
+		     long long bytes);
+int ubi_more_update_data(struct ubi_device *ubi, struct ubi_volume *vol,
+			 const void __user *buf, int count);
+int ubi_start_leb_change(struct ubi_device *ubi, struct ubi_volume *vol,
+			 const struct ubi_leb_change_req *req);
+int ubi_more_leb_change_data(struct ubi_device *ubi, struct ubi_volume *vol,
+			     const void __user *buf, int count);
+
+/* misc.c */
+int ubi_calc_data_len(const struct ubi_device *ubi, const void *buf, int length);
+int ubi_check_volume(struct ubi_device *ubi, int vol_id);
+void ubi_calculate_reserved(struct ubi_device *ubi);
+
+/* gluebi.c */
+#ifdef CONFIG_MTD_UBI_GLUEBI
+int ubi_create_gluebi(struct ubi_device *ubi, struct ubi_volume *vol);
+int ubi_destroy_gluebi(struct ubi_volume *vol);
+void ubi_gluebi_updated(struct ubi_volume *vol);
+#else
+#define ubi_create_gluebi(ubi, vol) 0
+#define ubi_destroy_gluebi(vol) 0
+#define ubi_gluebi_updated(vol)
+#endif
+
+/* eba.c */
+int ubi_eba_unmap_leb(struct ubi_device *ubi, struct ubi_volume *vol,
+		      int lnum);
+int ubi_eba_read_leb(struct ubi_device *ubi, struct ubi_volume *vol, int lnum,
+		     void *buf, int offset, int len, int check);
+int ubi_eba_write_leb(struct ubi_device *ubi, struct ubi_volume *vol, int lnum,
+		      const void *buf, int offset, int len, int dtype);
+int ubi_eba_write_leb_st(struct ubi_device *ubi, struct ubi_volume *vol,
+			 int lnum, const void *buf, int len, int dtype,
+			 int used_ebs);
+int ubi_eba_atomic_leb_change(struct ubi_device *ubi, struct ubi_volume *vol,
+			      int lnum, const void *buf, int len, int dtype);
+int ubi_eba_copy_leb(struct ubi_device *ubi, int from, int to,
+		     struct ubi_vid_hdr *vid_hdr);
+int ubi_eba_init_scan(struct ubi_device *ubi, struct ubi_scan_info *si);
+void ubi_eba_close(const struct ubi_device *ubi);
+
+/* wl.c */
+int ubi_wl_get_peb(struct ubi_device *ubi, int dtype);
+int ubi_wl_put_peb(struct ubi_device *ubi, int pnum, int torture);
+int ubi_wl_flush(struct ubi_device *ubi);
+int ubi_wl_scrub_peb(struct ubi_device *ubi, int pnum);
+int ubi_wl_init_scan(struct ubi_device *ubi, struct ubi_scan_info *si);
+void ubi_wl_close(struct ubi_device *ubi);
+int ubi_thread(void *u);
+
+/* io.c */
+int ubi_io_read(const struct ubi_device *ubi, void *buf, int pnum, int offset,
+		int len);
+int ubi_io_write(struct ubi_device *ubi, const void *buf, int pnum, int offset,
+		 int len);
+int ubi_io_sync_erase(struct ubi_device *ubi, int pnum, int torture);
+int ubi_io_is_bad(const struct ubi_device *ubi, int pnum);
+int ubi_io_mark_bad(const struct ubi_device *ubi, int pnum);
+int ubi_io_read_ec_hdr(struct ubi_device *ubi, int pnum,
+		       struct ubi_ec_hdr *ec_hdr, int verbose);
+int ubi_io_write_ec_hdr(struct ubi_device *ubi, int pnum,
+			struct ubi_ec_hdr *ec_hdr);
+int ubi_io_read_vid_hdr(struct ubi_device *ubi, int pnum,
+			struct ubi_vid_hdr *vid_hdr, int verbose);
+int ubi_io_write_vid_hdr(struct ubi_device *ubi, int pnum,
+			 struct ubi_vid_hdr *vid_hdr);
+
+/* build.c */
+int ubi_attach_mtd_dev(struct mtd_info *mtd, int ubi_num, int vid_hdr_offset);
+int ubi_detach_mtd_dev(int ubi_num, int anyway);
+struct ubi_device *ubi_get_device(int ubi_num);
+void ubi_put_device(struct ubi_device *ubi);
+struct ubi_device *ubi_get_by_major(int major);
+int ubi_major2num(int major);
+
+/*
+ * ubi_rb_for_each_entry - walk an RB-tree.
+ * @rb: a pointer to type 'struct rb_node' to to use as a loop counter
+ * @pos: a pointer to RB-tree entry type to use as a loop counter
+ * @root: RB-tree's root
+ * @member: the name of the 'struct rb_node' within the RB-tree entry
+ */
+#define ubi_rb_for_each_entry(rb, pos, root, member)                         \
+	for (rb = rb_first(root),                                            \
+	     pos = (rb ? container_of(rb, typeof(*pos), member) : NULL);     \
+	     rb;                                                             \
+	     rb = rb_next(rb), pos = container_of(rb, typeof(*pos), member))
+
+/**
+ * ubi_zalloc_vid_hdr - allocate a volume identifier header object.
+ * @ubi: UBI device description object
+ * @gfp_flags: GFP flags to allocate with
+ *
+ * This function returns a pointer to the newly allocated and zero-filled
+ * volume identifier header object in case of success and %NULL in case of
+ * failure.
+ */
+static inline struct ubi_vid_hdr *
+ubi_zalloc_vid_hdr(const struct ubi_device *ubi, gfp_t gfp_flags)
+{
+	void *vid_hdr;
+
+	vid_hdr = kzalloc(ubi->vid_hdr_alsize, gfp_flags);
+	if (!vid_hdr)
+		return NULL;
+
+	/*
+	 * VID headers may be stored at un-aligned flash offsets, so we shift
+	 * the pointer.
+	 */
+	return vid_hdr + ubi->vid_hdr_shift;
+}
+
+/**
+ * ubi_free_vid_hdr - free a volume identifier header object.
+ * @ubi: UBI device description object
+ * @vid_hdr: the object to free
+ */
+static inline void ubi_free_vid_hdr(const struct ubi_device *ubi,
+				    struct ubi_vid_hdr *vid_hdr)
+{
+	void *p = vid_hdr;
+
+	if (!p)
+		return;
+
+	kfree(p - ubi->vid_hdr_shift);
+}
+
+/*
+ * This function is equivalent to 'ubi_io_read()', but @offset is relative to
+ * the beginning of the logical eraseblock, not to the beginning of the
+ * physical eraseblock.
+ */
+static inline int ubi_io_read_data(const struct ubi_device *ubi, void *buf,
+				   int pnum, int offset, int len)
+{
+	ubi_assert(offset >= 0);
+	return ubi_io_read(ubi, buf, pnum, offset + ubi->leb_start, len);
+}
+
+/*
+ * This function is equivalent to 'ubi_io_write()', but @offset is relative to
+ * the beginning of the logical eraseblock, not to the beginning of the
+ * physical eraseblock.
+ */
+static inline int ubi_io_write_data(struct ubi_device *ubi, const void *buf,
+				    int pnum, int offset, int len)
+{
+	ubi_assert(offset >= 0);
+	return ubi_io_write(ubi, buf, pnum, offset + ubi->leb_start, len);
+}
+
+/**
+ * ubi_ro_mode - switch to read-only mode.
+ * @ubi: UBI device description object
+ */
+static inline void ubi_ro_mode(struct ubi_device *ubi)
+{
+	if (!ubi->ro_mode) {
+		ubi->ro_mode = 1;
+		ubi_warn("switch to read-only mode");
+	}
+}
+
+/**
+ * vol_id2idx - get table index by volume ID.
+ * @ubi: UBI device description object
+ * @vol_id: volume ID
+ */
+static inline int vol_id2idx(const struct ubi_device *ubi, int vol_id)
+{
+	if (vol_id >= UBI_INTERNAL_VOL_START)
+		return vol_id - UBI_INTERNAL_VOL_START + ubi->vtbl_slots;
+	else
+		return vol_id;
+}
+
+/**
+ * idx2vol_id - get volume ID by table index.
+ * @ubi: UBI device description object
+ * @idx: table index
+ */
+static inline int idx2vol_id(const struct ubi_device *ubi, int idx)
+{
+	if (idx >= ubi->vtbl_slots)
+		return idx - ubi->vtbl_slots + UBI_INTERNAL_VOL_START;
+	else
+		return idx;
+}
+
+#endif /* !__UBI_UBI_H__ */
diff --git a/drivers/mtd/ubi/upd.c b/drivers/mtd/ubi/upd.c
new file mode 100644
index 000000000..5f7ed7b2e
--- /dev/null
+++ b/drivers/mtd/ubi/upd.c
@@ -0,0 +1,441 @@
+/*
+ * Copyright (c) International Business Machines Corp., 2006
+ * Copyright (c) Nokia Corporation, 2006
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ * Author: Artem Bityutskiy (Битюцкий �ртём)
+ *
+ * Jan 2007: Alexander Schmidt, hacked per-volume update.
+ */
+
+/*
+ * This file contains implementation of the volume update and atomic LEB change
+ * functionality.
+ *
+ * The update operation is based on the per-volume update marker which is
+ * stored in the volume table. The update marker is set before the update
+ * starts, and removed after the update has been finished. So if the update was
+ * interrupted by an unclean re-boot or due to some other reasons, the update
+ * marker stays on the flash media and UBI finds it when it attaches the MTD
+ * device next time. If the update marker is set for a volume, the volume is
+ * treated as damaged and most I/O operations are prohibited. Only a new update
+ * operation is allowed.
+ *
+ * Note, in general it is possible to implement the update operation as a
+ * transaction with a roll-back capability.
+ */
+
+#ifdef UBI_LINUX
+#include <linux/err.h>
+#include <asm/uaccess.h>
+#include <asm/div64.h>
+#endif
+
+#include <ubi_uboot.h>
+#include "ubi.h"
+
+/**
+ * set_update_marker - set update marker.
+ * @ubi: UBI device description object
+ * @vol: volume description object
+ *
+ * This function sets the update marker flag for volume @vol. Returns zero
+ * in case of success and a negative error code in case of failure.
+ */
+static int set_update_marker(struct ubi_device *ubi, struct ubi_volume *vol)
+{
+	int err;
+	struct ubi_vtbl_record vtbl_rec;
+
+	dbg_msg("set update marker for volume %d", vol->vol_id);
+
+	if (vol->upd_marker) {
+		ubi_assert(ubi->vtbl[vol->vol_id].upd_marker);
+		dbg_msg("already set");
+		return 0;
+	}
+
+	memcpy(&vtbl_rec, &ubi->vtbl[vol->vol_id],
+	       sizeof(struct ubi_vtbl_record));
+	vtbl_rec.upd_marker = 1;
+
+	mutex_lock(&ubi->volumes_mutex);
+	err = ubi_change_vtbl_record(ubi, vol->vol_id, &vtbl_rec);
+	mutex_unlock(&ubi->volumes_mutex);
+	vol->upd_marker = 1;
+	return err;
+}
+
+/**
+ * clear_update_marker - clear update marker.
+ * @ubi: UBI device description object
+ * @vol: volume description object
+ * @bytes: new data size in bytes
+ *
+ * This function clears the update marker for volume @vol, sets new volume
+ * data size and clears the "corrupted" flag (static volumes only). Returns
+ * zero in case of success and a negative error code in case of failure.
+ */
+static int clear_update_marker(struct ubi_device *ubi, struct ubi_volume *vol,
+			       long long bytes)
+{
+	int err;
+	uint64_t tmp;
+	struct ubi_vtbl_record vtbl_rec;
+
+	dbg_msg("clear update marker for volume %d", vol->vol_id);
+
+	memcpy(&vtbl_rec, &ubi->vtbl[vol->vol_id],
+	       sizeof(struct ubi_vtbl_record));
+	ubi_assert(vol->upd_marker && vtbl_rec.upd_marker);
+	vtbl_rec.upd_marker = 0;
+
+	if (vol->vol_type == UBI_STATIC_VOLUME) {
+		vol->corrupted = 0;
+		vol->used_bytes = tmp = bytes;
+		vol->last_eb_bytes = do_div(tmp, vol->usable_leb_size);
+		vol->used_ebs = tmp;
+		if (vol->last_eb_bytes)
+			vol->used_ebs += 1;
+		else
+			vol->last_eb_bytes = vol->usable_leb_size;
+	}
+
+	mutex_lock(&ubi->volumes_mutex);
+	err = ubi_change_vtbl_record(ubi, vol->vol_id, &vtbl_rec);
+	mutex_unlock(&ubi->volumes_mutex);
+	vol->upd_marker = 0;
+	return err;
+}
+
+/**
+ * ubi_start_update - start volume update.
+ * @ubi: UBI device description object
+ * @vol: volume description object
+ * @bytes: update bytes
+ *
+ * This function starts volume update operation. If @bytes is zero, the volume
+ * is just wiped out. Returns zero in case of success and a negative error code
+ * in case of failure.
+ */
+int ubi_start_update(struct ubi_device *ubi, struct ubi_volume *vol,
+		     long long bytes)
+{
+	int i, err;
+	uint64_t tmp;
+
+	dbg_msg("start update of volume %d, %llu bytes", vol->vol_id, bytes);
+	ubi_assert(!vol->updating && !vol->changing_leb);
+	vol->updating = 1;
+
+	err = set_update_marker(ubi, vol);
+	if (err)
+		return err;
+
+	/* Before updating - wipe out the volume */
+	for (i = 0; i < vol->reserved_pebs; i++) {
+		err = ubi_eba_unmap_leb(ubi, vol, i);
+		if (err)
+			return err;
+	}
+
+	if (bytes == 0) {
+		err = clear_update_marker(ubi, vol, 0);
+		if (err)
+			return err;
+		err = ubi_wl_flush(ubi);
+		if (!err)
+			vol->updating = 0;
+	}
+
+	vol->upd_buf = vmalloc(ubi->leb_size);
+	if (!vol->upd_buf)
+		return -ENOMEM;
+
+	tmp = bytes;
+	vol->upd_ebs = !!do_div(tmp, vol->usable_leb_size);
+	vol->upd_ebs += tmp;
+	vol->upd_bytes = bytes;
+	vol->upd_received = 0;
+	return 0;
+}
+
+/**
+ * ubi_start_leb_change - start atomic LEB change.
+ * @ubi: UBI device description object
+ * @vol: volume description object
+ * @req: operation request
+ *
+ * This function starts atomic LEB change operation. Returns zero in case of
+ * success and a negative error code in case of failure.
+ */
+int ubi_start_leb_change(struct ubi_device *ubi, struct ubi_volume *vol,
+			 const struct ubi_leb_change_req *req)
+{
+	ubi_assert(!vol->updating && !vol->changing_leb);
+
+	dbg_msg("start changing LEB %d:%d, %u bytes",
+		vol->vol_id, req->lnum, req->bytes);
+	if (req->bytes == 0)
+		return ubi_eba_atomic_leb_change(ubi, vol, req->lnum, NULL, 0,
+						 req->dtype);
+
+	vol->upd_bytes = req->bytes;
+	vol->upd_received = 0;
+	vol->changing_leb = 1;
+	vol->ch_lnum = req->lnum;
+	vol->ch_dtype = req->dtype;
+
+	vol->upd_buf = vmalloc(req->bytes);
+	if (!vol->upd_buf)
+		return -ENOMEM;
+
+	return 0;
+}
+
+/**
+ * write_leb - write update data.
+ * @ubi: UBI device description object
+ * @vol: volume description object
+ * @lnum: logical eraseblock number
+ * @buf: data to write
+ * @len: data size
+ * @used_ebs: how many logical eraseblocks will this volume contain (static
+ * volumes only)
+ *
+ * This function writes update data to corresponding logical eraseblock. In
+ * case of dynamic volume, this function checks if the data contains 0xFF bytes
+ * at the end. If yes, the 0xFF bytes are cut and not written. So if the whole
+ * buffer contains only 0xFF bytes, the LEB is left unmapped.
+ *
+ * The reason why we skip the trailing 0xFF bytes in case of dynamic volume is
+ * that we want to make sure that more data may be appended to the logical
+ * eraseblock in future. Indeed, writing 0xFF bytes may have side effects and
+ * this PEB won't be writable anymore. So if one writes the file-system image
+ * to the UBI volume where 0xFFs mean free space - UBI makes sure this free
+ * space is writable after the update.
+ *
+ * We do not do this for static volumes because they are read-only. But this
+ * also cannot be done because we have to store per-LEB CRC and the correct
+ * data length.
+ *
+ * This function returns zero in case of success and a negative error code in
+ * case of failure.
+ */
+static int write_leb(struct ubi_device *ubi, struct ubi_volume *vol, int lnum,
+		     void *buf, int len, int used_ebs)
+{
+	int err;
+
+	if (vol->vol_type == UBI_DYNAMIC_VOLUME) {
+		int l = ALIGN(len, ubi->min_io_size);
+
+		memset(buf + len, 0xFF, l - len);
+		len = ubi_calc_data_len(ubi, buf, l);
+		if (len == 0) {
+			dbg_msg("all %d bytes contain 0xFF - skip", len);
+			return 0;
+		}
+
+		err = ubi_eba_write_leb(ubi, vol, lnum, buf, 0, len, UBI_UNKNOWN);
+	} else {
+		/*
+		 * When writing static volume, and this is the last logical
+		 * eraseblock, the length (@len) does not have to be aligned to
+		 * the minimal flash I/O unit. The 'ubi_eba_write_leb_st()'
+		 * function accepts exact (unaligned) length and stores it in
+		 * the VID header. And it takes care of proper alignment by
+		 * padding the buffer. Here we just make sure the padding will
+		 * contain zeros, not random trash.
+		 */
+		memset(buf + len, 0, vol->usable_leb_size - len);
+		err = ubi_eba_write_leb_st(ubi, vol, lnum, buf, len,
+					   UBI_UNKNOWN, used_ebs);
+	}
+
+	return err;
+}
+
+/**
+ * ubi_more_update_data - write more update data.
+ * @vol: volume description object
+ * @buf: write data (user-space memory buffer)
+ * @count: how much bytes to write
+ *
+ * This function writes more data to the volume which is being updated. It may
+ * be called arbitrary number of times until all the update data arriveis. This
+ * function returns %0 in case of success, number of bytes written during the
+ * last call if the whole volume update has been successfully finished, and a
+ * negative error code in case of failure.
+ */
+int ubi_more_update_data(struct ubi_device *ubi, struct ubi_volume *vol,
+			 const void __user *buf, int count)
+{
+	uint64_t tmp;
+	int lnum, offs, err = 0, len, to_write = count;
+
+	dbg_msg("write %d of %lld bytes, %lld already passed",
+		count, vol->upd_bytes, vol->upd_received);
+
+	if (ubi->ro_mode)
+		return -EROFS;
+
+	tmp = vol->upd_received;
+	offs = do_div(tmp, vol->usable_leb_size);
+	lnum = tmp;
+
+	if (vol->upd_received + count > vol->upd_bytes)
+		to_write = count = vol->upd_bytes - vol->upd_received;
+
+	/*
+	 * When updating volumes, we accumulate whole logical eraseblock of
+	 * data and write it at once.
+	 */
+	if (offs != 0) {
+		/*
+		 * This is a write to the middle of the logical eraseblock. We
+		 * copy the data to our update buffer and wait for more data or
+		 * flush it if the whole eraseblock is written or the update
+		 * is finished.
+		 */
+
+		len = vol->usable_leb_size - offs;
+		if (len > count)
+			len = count;
+
+		err = copy_from_user(vol->upd_buf + offs, buf, len);
+		if (err)
+			return -EFAULT;
+
+		if (offs + len == vol->usable_leb_size ||
+		    vol->upd_received + len == vol->upd_bytes) {
+			int flush_len = offs + len;
+
+			/*
+			 * OK, we gathered either the whole eraseblock or this
+			 * is the last chunk, it's time to flush the buffer.
+			 */
+			ubi_assert(flush_len <= vol->usable_leb_size);
+			err = write_leb(ubi, vol, lnum, vol->upd_buf, flush_len,
+					vol->upd_ebs);
+			if (err)
+				return err;
+		}
+
+		vol->upd_received += len;
+		count -= len;
+		buf += len;
+		lnum += 1;
+	}
+
+	/*
+	 * If we've got more to write, let's continue. At this point we know we
+	 * are starting from the beginning of an eraseblock.
+	 */
+	while (count) {
+		if (count > vol->usable_leb_size)
+			len = vol->usable_leb_size;
+		else
+			len = count;
+
+		err = copy_from_user(vol->upd_buf, buf, len);
+		if (err)
+			return -EFAULT;
+
+		if (len == vol->usable_leb_size ||
+		    vol->upd_received + len == vol->upd_bytes) {
+			err = write_leb(ubi, vol, lnum, vol->upd_buf,
+					len, vol->upd_ebs);
+			if (err)
+				break;
+		}
+
+		vol->upd_received += len;
+		count -= len;
+		lnum += 1;
+		buf += len;
+	}
+
+	ubi_assert(vol->upd_received <= vol->upd_bytes);
+	if (vol->upd_received == vol->upd_bytes) {
+		/* The update is finished, clear the update marker */
+		err = clear_update_marker(ubi, vol, vol->upd_bytes);
+		if (err)
+			return err;
+		err = ubi_wl_flush(ubi);
+		if (err == 0) {
+			vol->updating = 0;
+			err = to_write;
+			vfree(vol->upd_buf);
+		}
+	}
+
+	return err;
+}
+
+/**
+ * ubi_more_leb_change_data - accept more data for atomic LEB change.
+ * @vol: volume description object
+ * @buf: write data (user-space memory buffer)
+ * @count: how much bytes to write
+ *
+ * This function accepts more data to the volume which is being under the
+ * "atomic LEB change" operation. It may be called arbitrary number of times
+ * until all data arrives. This function returns %0 in case of success, number
+ * of bytes written during the last call if the whole "atomic LEB change"
+ * operation has been successfully finished, and a negative error code in case
+ * of failure.
+ */
+int ubi_more_leb_change_data(struct ubi_device *ubi, struct ubi_volume *vol,
+			     const void __user *buf, int count)
+{
+	int err;
+
+	dbg_msg("write %d of %lld bytes, %lld already passed",
+		count, vol->upd_bytes, vol->upd_received);
+
+	if (ubi->ro_mode)
+		return -EROFS;
+
+	if (vol->upd_received + count > vol->upd_bytes)
+		count = vol->upd_bytes - vol->upd_received;
+
+	err = copy_from_user(vol->upd_buf + vol->upd_received, buf, count);
+	if (err)
+		return -EFAULT;
+
+	vol->upd_received += count;
+
+	if (vol->upd_received == vol->upd_bytes) {
+		int len = ALIGN((int)vol->upd_bytes, ubi->min_io_size);
+
+		memset(vol->upd_buf + vol->upd_bytes, 0xFF, len - vol->upd_bytes);
+		len = ubi_calc_data_len(ubi, vol->upd_buf, len);
+		err = ubi_eba_atomic_leb_change(ubi, vol, vol->ch_lnum,
+						vol->upd_buf, len, UBI_UNKNOWN);
+		if (err)
+			return err;
+	}
+
+	ubi_assert(vol->upd_received <= vol->upd_bytes);
+	if (vol->upd_received == vol->upd_bytes) {
+		vol->changing_leb = 0;
+		err = count;
+		vfree(vol->upd_buf);
+	}
+
+	return err;
+}
diff --git a/drivers/mtd/ubi/vmt.c b/drivers/mtd/ubi/vmt.c
new file mode 100644
index 000000000..061da649e
--- /dev/null
+++ b/drivers/mtd/ubi/vmt.c
@@ -0,0 +1,862 @@
+/*
+ * Copyright (c) International Business Machines Corp., 2006
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation;  either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ * Author: Artem Bityutskiy (Битюцкий �ртём)
+ */
+
+/*
+ * This file contains implementation of volume creation, deletion, updating and
+ * resizing.
+ */
+
+#ifdef UBI_LINUX
+#include <linux/err.h>
+#include <asm/div64.h>
+#endif
+
+#include <ubi_uboot.h>
+#include "ubi.h"
+
+#ifdef CONFIG_MTD_UBI_DEBUG_PARANOID
+static void paranoid_check_volumes(struct ubi_device *ubi);
+#else
+#define paranoid_check_volumes(ubi)
+#endif
+
+#ifdef UBI_LINUX
+static ssize_t vol_attribute_show(struct device *dev,
+				  struct device_attribute *attr, char *buf);
+
+/* Device attributes corresponding to files in '/<sysfs>/class/ubi/ubiX_Y' */
+static struct device_attribute attr_vol_reserved_ebs =
+	__ATTR(reserved_ebs, S_IRUGO, vol_attribute_show, NULL);
+static struct device_attribute attr_vol_type =
+	__ATTR(type, S_IRUGO, vol_attribute_show, NULL);
+static struct device_attribute attr_vol_name =
+	__ATTR(name, S_IRUGO, vol_attribute_show, NULL);
+static struct device_attribute attr_vol_corrupted =
+	__ATTR(corrupted, S_IRUGO, vol_attribute_show, NULL);
+static struct device_attribute attr_vol_alignment =
+	__ATTR(alignment, S_IRUGO, vol_attribute_show, NULL);
+static struct device_attribute attr_vol_usable_eb_size =
+	__ATTR(usable_eb_size, S_IRUGO, vol_attribute_show, NULL);
+static struct device_attribute attr_vol_data_bytes =
+	__ATTR(data_bytes, S_IRUGO, vol_attribute_show, NULL);
+static struct device_attribute attr_vol_upd_marker =
+	__ATTR(upd_marker, S_IRUGO, vol_attribute_show, NULL);
+
+/*
+ * "Show" method for files in '/<sysfs>/class/ubi/ubiX_Y/'.
+ *
+ * Consider a situation:
+ * A. process 1 opens a sysfs file related to volume Y, say
+ *    /<sysfs>/class/ubi/ubiX_Y/reserved_ebs;
+ * B. process 2 removes volume Y;
+ * C. process 1 starts reading the /<sysfs>/class/ubi/ubiX_Y/reserved_ebs file;
+ *
+ * In this situation, this function will return %-ENODEV because it will find
+ * out that the volume was removed from the @ubi->volumes array.
+ */
+static ssize_t vol_attribute_show(struct device *dev,
+				  struct device_attribute *attr, char *buf)
+{
+	int ret;
+	struct ubi_volume *vol = container_of(dev, struct ubi_volume, dev);
+	struct ubi_device *ubi;
+
+	ubi = ubi_get_device(vol->ubi->ubi_num);
+	if (!ubi)
+		return -ENODEV;
+
+	spin_lock(&ubi->volumes_lock);
+	if (!ubi->volumes[vol->vol_id]) {
+		spin_unlock(&ubi->volumes_lock);
+		ubi_put_device(ubi);
+		return -ENODEV;
+	}
+	/* Take a reference to prevent volume removal */
+	vol->ref_count += 1;
+	spin_unlock(&ubi->volumes_lock);
+
+	if (attr == &attr_vol_reserved_ebs)
+		ret = sprintf(buf, "%d\n", vol->reserved_pebs);
+	else if (attr == &attr_vol_type) {
+		const char *tp;
+
+		if (vol->vol_type == UBI_DYNAMIC_VOLUME)
+			tp = "dynamic";
+		else
+			tp = "static";
+		ret = sprintf(buf, "%s\n", tp);
+	} else if (attr == &attr_vol_name)
+		ret = sprintf(buf, "%s\n", vol->name);
+	else if (attr == &attr_vol_corrupted)
+		ret = sprintf(buf, "%d\n", vol->corrupted);
+	else if (attr == &attr_vol_alignment)
+		ret = sprintf(buf, "%d\n", vol->alignment);
+	else if (attr == &attr_vol_usable_eb_size)
+		ret = sprintf(buf, "%d\n", vol->usable_leb_size);
+	else if (attr == &attr_vol_data_bytes)
+		ret = sprintf(buf, "%lld\n", vol->used_bytes);
+	else if (attr == &attr_vol_upd_marker)
+		ret = sprintf(buf, "%d\n", vol->upd_marker);
+	else
+		/* This must be a bug */
+		ret = -EINVAL;
+
+	/* We've done the operation, drop volume and UBI device references */
+	spin_lock(&ubi->volumes_lock);
+	vol->ref_count -= 1;
+	ubi_assert(vol->ref_count >= 0);
+	spin_unlock(&ubi->volumes_lock);
+	ubi_put_device(ubi);
+	return ret;
+}
+#endif
+
+/* Release method for volume devices */
+static void vol_release(struct device *dev)
+{
+	struct ubi_volume *vol = container_of(dev, struct ubi_volume, dev);
+
+	kfree(vol);
+}
+
+#ifdef UBI_LINUX
+/**
+ * volume_sysfs_init - initialize sysfs for new volume.
+ * @ubi: UBI device description object
+ * @vol: volume description object
+ *
+ * This function returns zero in case of success and a negative error code in
+ * case of failure.
+ *
+ * Note, this function does not free allocated resources in case of failure -
+ * the caller does it. This is because this would cause release() here and the
+ * caller would oops.
+ */
+static int volume_sysfs_init(struct ubi_device *ubi, struct ubi_volume *vol)
+{
+	int err;
+
+	err = device_create_file(&vol->dev, &attr_vol_reserved_ebs);
+	if (err)
+		return err;
+	err = device_create_file(&vol->dev, &attr_vol_type);
+	if (err)
+		return err;
+	err = device_create_file(&vol->dev, &attr_vol_name);
+	if (err)
+		return err;
+	err = device_create_file(&vol->dev, &attr_vol_corrupted);
+	if (err)
+		return err;
+	err = device_create_file(&vol->dev, &attr_vol_alignment);
+	if (err)
+		return err;
+	err = device_create_file(&vol->dev, &attr_vol_usable_eb_size);
+	if (err)
+		return err;
+	err = device_create_file(&vol->dev, &attr_vol_data_bytes);
+	if (err)
+		return err;
+	err = device_create_file(&vol->dev, &attr_vol_upd_marker);
+	return err;
+}
+
+/**
+ * volume_sysfs_close - close sysfs for a volume.
+ * @vol: volume description object
+ */
+static void volume_sysfs_close(struct ubi_volume *vol)
+{
+	device_remove_file(&vol->dev, &attr_vol_upd_marker);
+	device_remove_file(&vol->dev, &attr_vol_data_bytes);
+	device_remove_file(&vol->dev, &attr_vol_usable_eb_size);
+	device_remove_file(&vol->dev, &attr_vol_alignment);
+	device_remove_file(&vol->dev, &attr_vol_corrupted);
+	device_remove_file(&vol->dev, &attr_vol_name);
+	device_remove_file(&vol->dev, &attr_vol_type);
+	device_remove_file(&vol->dev, &attr_vol_reserved_ebs);
+	device_unregister(&vol->dev);
+}
+#endif
+
+/**
+ * ubi_create_volume - create volume.
+ * @ubi: UBI device description object
+ * @req: volume creation request
+ *
+ * This function creates volume described by @req. If @req->vol_id id
+ * %UBI_VOL_NUM_AUTO, this function automatically assign ID to the new volume
+ * and saves it in @req->vol_id. Returns zero in case of success and a negative
+ * error code in case of failure. Note, the caller has to have the
+ * @ubi->volumes_mutex locked.
+ */
+int ubi_create_volume(struct ubi_device *ubi, struct ubi_mkvol_req *req)
+{
+	int i, err, vol_id = req->vol_id, dont_free = 0;
+	struct ubi_volume *vol;
+	struct ubi_vtbl_record vtbl_rec;
+	uint64_t bytes;
+	dev_t dev;
+
+	if (ubi->ro_mode)
+		return -EROFS;
+
+	vol = kzalloc(sizeof(struct ubi_volume), GFP_KERNEL);
+	if (!vol)
+		return -ENOMEM;
+
+	spin_lock(&ubi->volumes_lock);
+	if (vol_id == UBI_VOL_NUM_AUTO) {
+		/* Find unused volume ID */
+		dbg_msg("search for vacant volume ID");
+		for (i = 0; i < ubi->vtbl_slots; i++)
+			if (!ubi->volumes[i]) {
+				vol_id = i;
+				break;
+			}
+
+		if (vol_id == UBI_VOL_NUM_AUTO) {
+			dbg_err("out of volume IDs");
+			err = -ENFILE;
+			goto out_unlock;
+		}
+		req->vol_id = vol_id;
+	}
+
+	dbg_msg("volume ID %d, %llu bytes, type %d, name %s",
+		vol_id, (unsigned long long)req->bytes,
+		(int)req->vol_type, req->name);
+
+	/* Ensure that this volume does not exist */
+	err = -EEXIST;
+	if (ubi->volumes[vol_id]) {
+		dbg_err("volume %d already exists", vol_id);
+		goto out_unlock;
+	}
+
+	/* Ensure that the name is unique */
+	for (i = 0; i < ubi->vtbl_slots; i++)
+		if (ubi->volumes[i] &&
+		    ubi->volumes[i]->name_len == req->name_len &&
+		    !strcmp(ubi->volumes[i]->name, req->name)) {
+			dbg_err("volume \"%s\" exists (ID %d)", req->name, i);
+			goto out_unlock;
+		}
+
+	/* Calculate how many eraseblocks are requested */
+	vol->usable_leb_size = ubi->leb_size - ubi->leb_size % req->alignment;
+	bytes = req->bytes;
+	if (do_div(bytes, vol->usable_leb_size))
+		vol->reserved_pebs = 1;
+	vol->reserved_pebs += bytes;
+
+	/* Reserve physical eraseblocks */
+	if (vol->reserved_pebs > ubi->avail_pebs) {
+		dbg_err("not enough PEBs, only %d available", ubi->avail_pebs);
+		err = -ENOSPC;
+		goto out_unlock;
+	}
+	ubi->avail_pebs -= vol->reserved_pebs;
+	ubi->rsvd_pebs += vol->reserved_pebs;
+	spin_unlock(&ubi->volumes_lock);
+
+	vol->vol_id    = vol_id;
+	vol->alignment = req->alignment;
+	vol->data_pad  = ubi->leb_size % vol->alignment;
+	vol->vol_type  = req->vol_type;
+	vol->name_len  = req->name_len;
+	memcpy(vol->name, req->name, vol->name_len + 1);
+	vol->ubi = ubi;
+
+	/*
+	 * Finish all pending erases because there may be some LEBs belonging
+	 * to the same volume ID.
+	 */
+	err = ubi_wl_flush(ubi);
+	if (err)
+		goto out_acc;
+
+	vol->eba_tbl = kmalloc(vol->reserved_pebs * sizeof(int), GFP_KERNEL);
+	if (!vol->eba_tbl) {
+		err = -ENOMEM;
+		goto out_acc;
+	}
+
+	for (i = 0; i < vol->reserved_pebs; i++)
+		vol->eba_tbl[i] = UBI_LEB_UNMAPPED;
+
+	if (vol->vol_type == UBI_DYNAMIC_VOLUME) {
+		vol->used_ebs = vol->reserved_pebs;
+		vol->last_eb_bytes = vol->usable_leb_size;
+		vol->used_bytes =
+			(long long)vol->used_ebs * vol->usable_leb_size;
+	} else {
+		bytes = vol->used_bytes;
+		vol->last_eb_bytes = do_div(bytes, vol->usable_leb_size);
+		vol->used_ebs = bytes;
+		if (vol->last_eb_bytes)
+			vol->used_ebs += 1;
+		else
+			vol->last_eb_bytes = vol->usable_leb_size;
+	}
+
+	/* Register character device for the volume */
+	cdev_init(&vol->cdev, &ubi_vol_cdev_operations);
+	vol->cdev.owner = THIS_MODULE;
+	dev = MKDEV(MAJOR(ubi->cdev.dev), vol_id + 1);
+	err = cdev_add(&vol->cdev, dev, 1);
+	if (err) {
+		ubi_err("cannot add character device");
+		goto out_mapping;
+	}
+
+	err = ubi_create_gluebi(ubi, vol);
+	if (err)
+		goto out_cdev;
+
+	vol->dev.release = vol_release;
+	vol->dev.parent = &ubi->dev;
+	vol->dev.devt = dev;
+	vol->dev.class = ubi_class;
+
+	sprintf(&vol->dev.bus_id[0], "%s_%d", ubi->ubi_name, vol->vol_id);
+	err = device_register(&vol->dev);
+	if (err) {
+		ubi_err("cannot register device");
+		goto out_gluebi;
+	}
+
+	err = volume_sysfs_init(ubi, vol);
+	if (err)
+		goto out_sysfs;
+
+	/* Fill volume table record */
+	memset(&vtbl_rec, 0, sizeof(struct ubi_vtbl_record));
+	vtbl_rec.reserved_pebs = cpu_to_be32(vol->reserved_pebs);
+	vtbl_rec.alignment     = cpu_to_be32(vol->alignment);
+	vtbl_rec.data_pad      = cpu_to_be32(vol->data_pad);
+	vtbl_rec.name_len      = cpu_to_be16(vol->name_len);
+	if (vol->vol_type == UBI_DYNAMIC_VOLUME)
+		vtbl_rec.vol_type = UBI_VID_DYNAMIC;
+	else
+		vtbl_rec.vol_type = UBI_VID_STATIC;
+	memcpy(vtbl_rec.name, vol->name, vol->name_len + 1);
+
+	err = ubi_change_vtbl_record(ubi, vol_id, &vtbl_rec);
+	if (err)
+		goto out_sysfs;
+
+	spin_lock(&ubi->volumes_lock);
+	ubi->volumes[vol_id] = vol;
+	ubi->vol_count += 1;
+	spin_unlock(&ubi->volumes_lock);
+
+	paranoid_check_volumes(ubi);
+	return 0;
+
+out_sysfs:
+	/*
+	 * We have registered our device, we should not free the volume*
+	 * description object in this function in case of an error - it is
+	 * freed by the release function.
+	 *
+	 * Get device reference to prevent the release function from being
+	 * called just after sysfs has been closed.
+	 */
+	dont_free = 1;
+	get_device(&vol->dev);
+	volume_sysfs_close(vol);
+out_gluebi:
+	if (ubi_destroy_gluebi(vol))
+		dbg_err("cannot destroy gluebi for volume %d:%d",
+			ubi->ubi_num, vol_id);
+out_cdev:
+	cdev_del(&vol->cdev);
+out_mapping:
+	kfree(vol->eba_tbl);
+out_acc:
+	spin_lock(&ubi->volumes_lock);
+	ubi->rsvd_pebs -= vol->reserved_pebs;
+	ubi->avail_pebs += vol->reserved_pebs;
+out_unlock:
+	spin_unlock(&ubi->volumes_lock);
+	if (dont_free)
+		put_device(&vol->dev);
+	else
+		kfree(vol);
+	ubi_err("cannot create volume %d, error %d", vol_id, err);
+	return err;
+}
+
+/**
+ * ubi_remove_volume - remove volume.
+ * @desc: volume descriptor
+ *
+ * This function removes volume described by @desc. The volume has to be opened
+ * in "exclusive" mode. Returns zero in case of success and a negative error
+ * code in case of failure. The caller has to have the @ubi->volumes_mutex
+ * locked.
+ */
+int ubi_remove_volume(struct ubi_volume_desc *desc)
+{
+	struct ubi_volume *vol = desc->vol;
+	struct ubi_device *ubi = vol->ubi;
+	int i, err, vol_id = vol->vol_id, reserved_pebs = vol->reserved_pebs;
+
+	dbg_msg("remove UBI volume %d", vol_id);
+	ubi_assert(desc->mode == UBI_EXCLUSIVE);
+	ubi_assert(vol == ubi->volumes[vol_id]);
+
+	if (ubi->ro_mode)
+		return -EROFS;
+
+	spin_lock(&ubi->volumes_lock);
+	if (vol->ref_count > 1) {
+		/*
+		 * The volume is busy, probably someone is reading one of its
+		 * sysfs files.
+		 */
+		err = -EBUSY;
+		goto out_unlock;
+	}
+	ubi->volumes[vol_id] = NULL;
+	spin_unlock(&ubi->volumes_lock);
+
+	err = ubi_destroy_gluebi(vol);
+	if (err)
+		goto out_err;
+
+	err = ubi_change_vtbl_record(ubi, vol_id, NULL);
+	if (err)
+		goto out_err;
+
+	for (i = 0; i < vol->reserved_pebs; i++) {
+		err = ubi_eba_unmap_leb(ubi, vol, i);
+		if (err)
+			goto out_err;
+	}
+
+	kfree(vol->eba_tbl);
+	vol->eba_tbl = NULL;
+	cdev_del(&vol->cdev);
+	volume_sysfs_close(vol);
+
+	spin_lock(&ubi->volumes_lock);
+	ubi->rsvd_pebs -= reserved_pebs;
+	ubi->avail_pebs += reserved_pebs;
+	i = ubi->beb_rsvd_level - ubi->beb_rsvd_pebs;
+	if (i > 0) {
+		i = ubi->avail_pebs >= i ? i : ubi->avail_pebs;
+		ubi->avail_pebs -= i;
+		ubi->rsvd_pebs += i;
+		ubi->beb_rsvd_pebs += i;
+		if (i > 0)
+			ubi_msg("reserve more %d PEBs", i);
+	}
+	ubi->vol_count -= 1;
+	spin_unlock(&ubi->volumes_lock);
+
+	paranoid_check_volumes(ubi);
+	return 0;
+
+out_err:
+	ubi_err("cannot remove volume %d, error %d", vol_id, err);
+	spin_lock(&ubi->volumes_lock);
+	ubi->volumes[vol_id] = vol;
+out_unlock:
+	spin_unlock(&ubi->volumes_lock);
+	return err;
+}
+
+/**
+ * ubi_resize_volume - re-size volume.
+ * @desc: volume descriptor
+ * @reserved_pebs: new size in physical eraseblocks
+ *
+ * This function re-sizes the volume and returns zero in case of success, and a
+ * negative error code in case of failure. The caller has to have the
+ * @ubi->volumes_mutex locked.
+ */
+int ubi_resize_volume(struct ubi_volume_desc *desc, int reserved_pebs)
+{
+	int i, err, pebs, *new_mapping;
+	struct ubi_volume *vol = desc->vol;
+	struct ubi_device *ubi = vol->ubi;
+	struct ubi_vtbl_record vtbl_rec;
+	int vol_id = vol->vol_id;
+
+	if (ubi->ro_mode)
+		return -EROFS;
+
+	dbg_msg("re-size volume %d to from %d to %d PEBs",
+		vol_id, vol->reserved_pebs, reserved_pebs);
+
+	if (vol->vol_type == UBI_STATIC_VOLUME &&
+	    reserved_pebs < vol->used_ebs) {
+		dbg_err("too small size %d, %d LEBs contain data",
+			reserved_pebs, vol->used_ebs);
+		return -EINVAL;
+	}
+
+	/* If the size is the same, we have nothing to do */
+	if (reserved_pebs == vol->reserved_pebs)
+		return 0;
+
+	new_mapping = kmalloc(reserved_pebs * sizeof(int), GFP_KERNEL);
+	if (!new_mapping)
+		return -ENOMEM;
+
+	for (i = 0; i < reserved_pebs; i++)
+		new_mapping[i] = UBI_LEB_UNMAPPED;
+
+	spin_lock(&ubi->volumes_lock);
+	if (vol->ref_count > 1) {
+		spin_unlock(&ubi->volumes_lock);
+		err = -EBUSY;
+		goto out_free;
+	}
+	spin_unlock(&ubi->volumes_lock);
+
+	/* Reserve physical eraseblocks */
+	pebs = reserved_pebs - vol->reserved_pebs;
+	if (pebs > 0) {
+		spin_lock(&ubi->volumes_lock);
+		if (pebs > ubi->avail_pebs) {
+			dbg_err("not enough PEBs: requested %d, available %d",
+				pebs, ubi->avail_pebs);
+			spin_unlock(&ubi->volumes_lock);
+			err = -ENOSPC;
+			goto out_free;
+		}
+		ubi->avail_pebs -= pebs;
+		ubi->rsvd_pebs += pebs;
+		for (i = 0; i < vol->reserved_pebs; i++)
+			new_mapping[i] = vol->eba_tbl[i];
+		kfree(vol->eba_tbl);
+		vol->eba_tbl = new_mapping;
+		spin_unlock(&ubi->volumes_lock);
+	}
+
+	/* Change volume table record */
+	memcpy(&vtbl_rec, &ubi->vtbl[vol_id], sizeof(struct ubi_vtbl_record));
+	vtbl_rec.reserved_pebs = cpu_to_be32(reserved_pebs);
+	err = ubi_change_vtbl_record(ubi, vol_id, &vtbl_rec);
+	if (err)
+		goto out_acc;
+
+	if (pebs < 0) {
+		for (i = 0; i < -pebs; i++) {
+			err = ubi_eba_unmap_leb(ubi, vol, reserved_pebs + i);
+			if (err)
+				goto out_acc;
+		}
+		spin_lock(&ubi->volumes_lock);
+		ubi->rsvd_pebs += pebs;
+		ubi->avail_pebs -= pebs;
+		pebs = ubi->beb_rsvd_level - ubi->beb_rsvd_pebs;
+		if (pebs > 0) {
+			pebs = ubi->avail_pebs >= pebs ? pebs : ubi->avail_pebs;
+			ubi->avail_pebs -= pebs;
+			ubi->rsvd_pebs += pebs;
+			ubi->beb_rsvd_pebs += pebs;
+			if (pebs > 0)
+				ubi_msg("reserve more %d PEBs", pebs);
+		}
+		for (i = 0; i < reserved_pebs; i++)
+			new_mapping[i] = vol->eba_tbl[i];
+		kfree(vol->eba_tbl);
+		vol->eba_tbl = new_mapping;
+		spin_unlock(&ubi->volumes_lock);
+	}
+
+	vol->reserved_pebs = reserved_pebs;
+	if (vol->vol_type == UBI_DYNAMIC_VOLUME) {
+		vol->used_ebs = reserved_pebs;
+		vol->last_eb_bytes = vol->usable_leb_size;
+		vol->used_bytes =
+			(long long)vol->used_ebs * vol->usable_leb_size;
+	}
+
+	paranoid_check_volumes(ubi);
+	return 0;
+
+out_acc:
+	if (pebs > 0) {
+		spin_lock(&ubi->volumes_lock);
+		ubi->rsvd_pebs -= pebs;
+		ubi->avail_pebs += pebs;
+		spin_unlock(&ubi->volumes_lock);
+	}
+out_free:
+	kfree(new_mapping);
+	return err;
+}
+
+/**
+ * ubi_add_volume - add volume.
+ * @ubi: UBI device description object
+ * @vol: volume description object
+ *
+ * This function adds an existing volume and initializes all its data
+ * structures. Returns zero in case of success and a negative error code in
+ * case of failure.
+ */
+int ubi_add_volume(struct ubi_device *ubi, struct ubi_volume *vol)
+{
+	int err, vol_id = vol->vol_id;
+	dev_t dev;
+
+	dbg_msg("add volume %d", vol_id);
+	ubi_dbg_dump_vol_info(vol);
+
+	/* Register character device for the volume */
+	cdev_init(&vol->cdev, &ubi_vol_cdev_operations);
+	vol->cdev.owner = THIS_MODULE;
+	dev = MKDEV(MAJOR(ubi->cdev.dev), vol->vol_id + 1);
+	err = cdev_add(&vol->cdev, dev, 1);
+	if (err) {
+		ubi_err("cannot add character device for volume %d, error %d",
+			vol_id, err);
+		return err;
+	}
+
+	err = ubi_create_gluebi(ubi, vol);
+	if (err)
+		goto out_cdev;
+
+	vol->dev.release = vol_release;
+	vol->dev.parent = &ubi->dev;
+	vol->dev.devt = dev;
+	vol->dev.class = ubi_class;
+	sprintf(&vol->dev.bus_id[0], "%s_%d", ubi->ubi_name, vol->vol_id);
+	err = device_register(&vol->dev);
+	if (err)
+		goto out_gluebi;
+
+	err = volume_sysfs_init(ubi, vol);
+	if (err) {
+		cdev_del(&vol->cdev);
+		err = ubi_destroy_gluebi(vol);
+		volume_sysfs_close(vol);
+		return err;
+	}
+
+	paranoid_check_volumes(ubi);
+	return 0;
+
+out_gluebi:
+	err = ubi_destroy_gluebi(vol);
+out_cdev:
+	cdev_del(&vol->cdev);
+	return err;
+}
+
+/**
+ * ubi_free_volume - free volume.
+ * @ubi: UBI device description object
+ * @vol: volume description object
+ *
+ * This function frees all resources for volume @vol but does not remove it.
+ * Used only when the UBI device is detached.
+ */
+void ubi_free_volume(struct ubi_device *ubi, struct ubi_volume *vol)
+{
+	int err;
+
+	dbg_msg("free volume %d", vol->vol_id);
+
+	ubi->volumes[vol->vol_id] = NULL;
+	err = ubi_destroy_gluebi(vol);
+	cdev_del(&vol->cdev);
+	volume_sysfs_close(vol);
+}
+
+#ifdef CONFIG_MTD_UBI_DEBUG_PARANOID
+
+/**
+ * paranoid_check_volume - check volume information.
+ * @ubi: UBI device description object
+ * @vol_id: volume ID
+ */
+static void paranoid_check_volume(struct ubi_device *ubi, int vol_id)
+{
+	int idx = vol_id2idx(ubi, vol_id);
+	int reserved_pebs, alignment, data_pad, vol_type, name_len, upd_marker;
+	const struct ubi_volume *vol;
+	long long n;
+	const char *name;
+
+	spin_lock(&ubi->volumes_lock);
+	reserved_pebs = be32_to_cpu(ubi->vtbl[vol_id].reserved_pebs);
+	vol = ubi->volumes[idx];
+
+	if (!vol) {
+		if (reserved_pebs) {
+			ubi_err("no volume info, but volume exists");
+			goto fail;
+		}
+		spin_unlock(&ubi->volumes_lock);
+		return;
+	}
+
+	if (vol->exclusive) {
+		/*
+		 * The volume may be being created at the moment, do not check
+		 * it (e.g., it may be in the middle of ubi_create_volume().
+		 */
+		spin_unlock(&ubi->volumes_lock);
+		return;
+	}
+
+	if (vol->reserved_pebs < 0 || vol->alignment < 0 || vol->data_pad < 0 ||
+	    vol->name_len < 0) {
+		ubi_err("negative values");
+		goto fail;
+	}
+	if (vol->alignment > ubi->leb_size || vol->alignment == 0) {
+		ubi_err("bad alignment");
+		goto fail;
+	}
+
+	n = vol->alignment & (ubi->min_io_size - 1);
+	if (vol->alignment != 1 && n) {
+		ubi_err("alignment is not multiple of min I/O unit");
+		goto fail;
+	}
+
+	n = ubi->leb_size % vol->alignment;
+	if (vol->data_pad != n) {
+		ubi_err("bad data_pad, has to be %lld", n);
+		goto fail;
+	}
+
+	if (vol->vol_type != UBI_DYNAMIC_VOLUME &&
+	    vol->vol_type != UBI_STATIC_VOLUME) {
+		ubi_err("bad vol_type");
+		goto fail;
+	}
+
+	if (vol->upd_marker && vol->corrupted) {
+		dbg_err("update marker and corrupted simultaneously");
+		goto fail;
+	}
+
+	if (vol->reserved_pebs > ubi->good_peb_count) {
+		ubi_err("too large reserved_pebs");
+		goto fail;
+	}
+
+	n = ubi->leb_size - vol->data_pad;
+	if (vol->usable_leb_size != ubi->leb_size - vol->data_pad) {
+		ubi_err("bad usable_leb_size, has to be %lld", n);
+		goto fail;
+	}
+
+	if (vol->name_len > UBI_VOL_NAME_MAX) {
+		ubi_err("too long volume name, max is %d", UBI_VOL_NAME_MAX);
+		goto fail;
+	}
+
+	if (!vol->name) {
+		ubi_err("NULL volume name");
+		goto fail;
+	}
+
+	n = strnlen(vol->name, vol->name_len + 1);
+	if (n != vol->name_len) {
+		ubi_err("bad name_len %lld", n);
+		goto fail;
+	}
+
+	n = (long long)vol->used_ebs * vol->usable_leb_size;
+	if (vol->vol_type == UBI_DYNAMIC_VOLUME) {
+		if (vol->corrupted) {
+			ubi_err("corrupted dynamic volume");
+			goto fail;
+		}
+		if (vol->used_ebs != vol->reserved_pebs) {
+			ubi_err("bad used_ebs");
+			goto fail;
+		}
+		if (vol->last_eb_bytes != vol->usable_leb_size) {
+			ubi_err("bad last_eb_bytes");
+			goto fail;
+		}
+		if (vol->used_bytes != n) {
+			ubi_err("bad used_bytes");
+			goto fail;
+		}
+	} else {
+		if (vol->used_ebs < 0 || vol->used_ebs > vol->reserved_pebs) {
+			ubi_err("bad used_ebs");
+			goto fail;
+		}
+		if (vol->last_eb_bytes < 0 ||
+		    vol->last_eb_bytes > vol->usable_leb_size) {
+			ubi_err("bad last_eb_bytes");
+			goto fail;
+		}
+		if (vol->used_bytes < 0 || vol->used_bytes > n ||
+		    vol->used_bytes < n - vol->usable_leb_size) {
+			ubi_err("bad used_bytes");
+			goto fail;
+		}
+	}
+
+	alignment  = be32_to_cpu(ubi->vtbl[vol_id].alignment);
+	data_pad   = be32_to_cpu(ubi->vtbl[vol_id].data_pad);
+	name_len   = be16_to_cpu(ubi->vtbl[vol_id].name_len);
+	upd_marker = ubi->vtbl[vol_id].upd_marker;
+	name       = &ubi->vtbl[vol_id].name[0];
+	if (ubi->vtbl[vol_id].vol_type == UBI_VID_DYNAMIC)
+		vol_type = UBI_DYNAMIC_VOLUME;
+	else
+		vol_type = UBI_STATIC_VOLUME;
+
+	if (alignment != vol->alignment || data_pad != vol->data_pad ||
+	    upd_marker != vol->upd_marker || vol_type != vol->vol_type ||
+	    name_len!= vol->name_len || strncmp(name, vol->name, name_len)) {
+		ubi_err("volume info is different");
+		goto fail;
+	}
+
+	spin_unlock(&ubi->volumes_lock);
+	return;
+
+fail:
+	ubi_err("paranoid check failed for volume %d", vol_id);
+	ubi_dbg_dump_vol_info(vol);
+	ubi_dbg_dump_vtbl_record(&ubi->vtbl[vol_id], vol_id);
+	spin_unlock(&ubi->volumes_lock);
+	BUG();
+}
+
+/**
+ * paranoid_check_volumes - check information about all volumes.
+ * @ubi: UBI device description object
+ */
+static void paranoid_check_volumes(struct ubi_device *ubi)
+{
+	int i;
+
+	for (i = 0; i < ubi->vtbl_slots; i++)
+		paranoid_check_volume(ubi, i);
+}
+#endif
diff --git a/drivers/mtd/ubi/vtbl.c b/drivers/mtd/ubi/vtbl.c
new file mode 100644
index 000000000..9264ac68e
--- /dev/null
+++ b/drivers/mtd/ubi/vtbl.c
@@ -0,0 +1,837 @@
+/*
+ * Copyright (c) International Business Machines Corp., 2006
+ * Copyright (c) Nokia Corporation, 2006, 2007
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ * Author: Artem Bityutskiy (Битюцкий �ртём)
+ */
+
+/*
+ * This file includes volume table manipulation code. The volume table is an
+ * on-flash table containing volume meta-data like name, number of reserved
+ * physical eraseblocks, type, etc. The volume table is stored in the so-called
+ * "layout volume".
+ *
+ * The layout volume is an internal volume which is organized as follows. It
+ * consists of two logical eraseblocks - LEB 0 and LEB 1. Each logical
+ * eraseblock stores one volume table copy, i.e. LEB 0 and LEB 1 duplicate each
+ * other. This redundancy guarantees robustness to unclean reboots. The volume
+ * table is basically an array of volume table records. Each record contains
+ * full information about the volume and protected by a CRC checksum.
+ *
+ * The volume table is changed, it is first changed in RAM. Then LEB 0 is
+ * erased, and the updated volume table is written back to LEB 0. Then same for
+ * LEB 1. This scheme guarantees recoverability from unclean reboots.
+ *
+ * In this UBI implementation the on-flash volume table does not contain any
+ * information about how many data static volumes contain. This information may
+ * be found from the scanning data.
+ *
+ * But it would still be beneficial to store this information in the volume
+ * table. For example, suppose we have a static volume X, and all its physical
+ * eraseblocks became bad for some reasons. Suppose we are attaching the
+ * corresponding MTD device, the scanning has found no logical eraseblocks
+ * corresponding to the volume X. According to the volume table volume X does
+ * exist. So we don't know whether it is just empty or all its physical
+ * eraseblocks went bad. So we cannot alarm the user about this corruption.
+ *
+ * The volume table also stores so-called "update marker", which is used for
+ * volume updates. Before updating the volume, the update marker is set, and
+ * after the update operation is finished, the update marker is cleared. So if
+ * the update operation was interrupted (e.g. by an unclean reboot) - the
+ * update marker is still there and we know that the volume's contents is
+ * damaged.
+ */
+
+#ifdef UBI_LINUX
+#include <linux/crc32.h>
+#include <linux/err.h>
+#include <asm/div64.h>
+#endif
+
+#include <ubi_uboot.h>
+#include "ubi.h"
+
+#ifdef CONFIG_MTD_UBI_DEBUG_PARANOID
+static void paranoid_vtbl_check(const struct ubi_device *ubi);
+#else
+#define paranoid_vtbl_check(ubi)
+#endif
+
+/* Empty volume table record */
+static struct ubi_vtbl_record empty_vtbl_record;
+
+/**
+ * ubi_change_vtbl_record - change volume table record.
+ * @ubi: UBI device description object
+ * @idx: table index to change
+ * @vtbl_rec: new volume table record
+ *
+ * This function changes volume table record @idx. If @vtbl_rec is %NULL, empty
+ * volume table record is written. The caller does not have to calculate CRC of
+ * the record as it is done by this function. Returns zero in case of success
+ * and a negative error code in case of failure.
+ */
+int ubi_change_vtbl_record(struct ubi_device *ubi, int idx,
+			   struct ubi_vtbl_record *vtbl_rec)
+{
+	int i, err;
+	uint32_t crc;
+	struct ubi_volume *layout_vol;
+
+	ubi_assert(idx >= 0 && idx < ubi->vtbl_slots);
+	layout_vol = ubi->volumes[vol_id2idx(ubi, UBI_LAYOUT_VOLUME_ID)];
+
+	if (!vtbl_rec)
+		vtbl_rec = &empty_vtbl_record;
+	else {
+		crc = crc32(UBI_CRC32_INIT, vtbl_rec, UBI_VTBL_RECORD_SIZE_CRC);
+		vtbl_rec->crc = cpu_to_be32(crc);
+	}
+
+	memcpy(&ubi->vtbl[idx], vtbl_rec, sizeof(struct ubi_vtbl_record));
+	for (i = 0; i < UBI_LAYOUT_VOLUME_EBS; i++) {
+		err = ubi_eba_unmap_leb(ubi, layout_vol, i);
+		if (err)
+			return err;
+
+		err = ubi_eba_write_leb(ubi, layout_vol, i, ubi->vtbl, 0,
+					ubi->vtbl_size, UBI_LONGTERM);
+		if (err)
+			return err;
+	}
+
+	paranoid_vtbl_check(ubi);
+	return 0;
+}
+
+/**
+ * vtbl_check - check if volume table is not corrupted and contains sensible
+ *              data.
+ * @ubi: UBI device description object
+ * @vtbl: volume table
+ *
+ * This function returns zero if @vtbl is all right, %1 if CRC is incorrect,
+ * and %-EINVAL if it contains inconsistent data.
+ */
+static int vtbl_check(const struct ubi_device *ubi,
+		      const struct ubi_vtbl_record *vtbl)
+{
+	int i, n, reserved_pebs, alignment, data_pad, vol_type, name_len;
+	int upd_marker, err;
+	uint32_t crc;
+	const char *name;
+
+	for (i = 0; i < ubi->vtbl_slots; i++) {
+		cond_resched();
+
+		reserved_pebs = be32_to_cpu(vtbl[i].reserved_pebs);
+		alignment = be32_to_cpu(vtbl[i].alignment);
+		data_pad = be32_to_cpu(vtbl[i].data_pad);
+		upd_marker = vtbl[i].upd_marker;
+		vol_type = vtbl[i].vol_type;
+		name_len = be16_to_cpu(vtbl[i].name_len);
+		name = (const char *) &vtbl[i].name[0];
+
+		crc = crc32(UBI_CRC32_INIT, &vtbl[i], UBI_VTBL_RECORD_SIZE_CRC);
+		if (be32_to_cpu(vtbl[i].crc) != crc) {
+			ubi_err("bad CRC at record %u: %#08x, not %#08x",
+				 i, crc, be32_to_cpu(vtbl[i].crc));
+			ubi_dbg_dump_vtbl_record(&vtbl[i], i);
+			return 1;
+		}
+
+		if (reserved_pebs == 0) {
+			if (memcmp(&vtbl[i], &empty_vtbl_record,
+						UBI_VTBL_RECORD_SIZE)) {
+				err = 2;
+				goto bad;
+			}
+			continue;
+		}
+
+		if (reserved_pebs < 0 || alignment < 0 || data_pad < 0 ||
+		    name_len < 0) {
+			err = 3;
+			goto bad;
+		}
+
+		if (alignment > ubi->leb_size || alignment == 0) {
+			err = 4;
+			goto bad;
+		}
+
+		n = alignment & (ubi->min_io_size - 1);
+		if (alignment != 1 && n) {
+			err = 5;
+			goto bad;
+		}
+
+		n = ubi->leb_size % alignment;
+		if (data_pad != n) {
+			dbg_err("bad data_pad, has to be %d", n);
+			err = 6;
+			goto bad;
+		}
+
+		if (vol_type != UBI_VID_DYNAMIC && vol_type != UBI_VID_STATIC) {
+			err = 7;
+			goto bad;
+		}
+
+		if (upd_marker != 0 && upd_marker != 1) {
+			err = 8;
+			goto bad;
+		}
+
+		if (reserved_pebs > ubi->good_peb_count) {
+			dbg_err("too large reserved_pebs, good PEBs %d",
+				ubi->good_peb_count);
+			err = 9;
+			goto bad;
+		}
+
+		if (name_len > UBI_VOL_NAME_MAX) {
+			err = 10;
+			goto bad;
+		}
+
+		if (name[0] == '\0') {
+			err = 11;
+			goto bad;
+		}
+
+		if (name_len != strnlen(name, name_len + 1)) {
+			err = 12;
+			goto bad;
+		}
+	}
+
+	/* Checks that all names are unique */
+	for (i = 0; i < ubi->vtbl_slots - 1; i++) {
+		for (n = i + 1; n < ubi->vtbl_slots; n++) {
+			int len1 = be16_to_cpu(vtbl[i].name_len);
+			int len2 = be16_to_cpu(vtbl[n].name_len);
+
+			if (len1 > 0 && len1 == len2 &&
+			    !strncmp((char *)vtbl[i].name, (char *)vtbl[n].name, len1)) {
+				ubi_err("volumes %d and %d have the same name"
+					" \"%s\"", i, n, vtbl[i].name);
+				ubi_dbg_dump_vtbl_record(&vtbl[i], i);
+				ubi_dbg_dump_vtbl_record(&vtbl[n], n);
+				return -EINVAL;
+			}
+		}
+	}
+
+	return 0;
+
+bad:
+	ubi_err("volume table check failed: record %d, error %d", i, err);
+	ubi_dbg_dump_vtbl_record(&vtbl[i], i);
+	return -EINVAL;
+}
+
+/**
+ * create_vtbl - create a copy of volume table.
+ * @ubi: UBI device description object
+ * @si: scanning information
+ * @copy: number of the volume table copy
+ * @vtbl: contents of the volume table
+ *
+ * This function returns zero in case of success and a negative error code in
+ * case of failure.
+ */
+static int create_vtbl(struct ubi_device *ubi, struct ubi_scan_info *si,
+		       int copy, void *vtbl)
+{
+	int err, tries = 0;
+	static struct ubi_vid_hdr *vid_hdr;
+	struct ubi_scan_volume *sv;
+	struct ubi_scan_leb *new_seb, *old_seb = NULL;
+
+	ubi_msg("create volume table (copy #%d)", copy + 1);
+
+	vid_hdr = ubi_zalloc_vid_hdr(ubi, GFP_KERNEL);
+	if (!vid_hdr)
+		return -ENOMEM;
+
+	/*
+	 * Check if there is a logical eraseblock which would have to contain
+	 * this volume table copy was found during scanning. It has to be wiped
+	 * out.
+	 */
+	sv = ubi_scan_find_sv(si, UBI_LAYOUT_VOLUME_ID);
+	if (sv)
+		old_seb = ubi_scan_find_seb(sv, copy);
+
+retry:
+	new_seb = ubi_scan_get_free_peb(ubi, si);
+	if (IS_ERR(new_seb)) {
+		err = PTR_ERR(new_seb);
+		goto out_free;
+	}
+
+	vid_hdr->vol_type = UBI_VID_DYNAMIC;
+	vid_hdr->vol_id = cpu_to_be32(UBI_LAYOUT_VOLUME_ID);
+	vid_hdr->compat = UBI_LAYOUT_VOLUME_COMPAT;
+	vid_hdr->data_size = vid_hdr->used_ebs =
+			     vid_hdr->data_pad = cpu_to_be32(0);
+	vid_hdr->lnum = cpu_to_be32(copy);
+	vid_hdr->sqnum = cpu_to_be64(++si->max_sqnum);
+	vid_hdr->leb_ver = cpu_to_be32(old_seb ? old_seb->leb_ver + 1: 0);
+
+	/* The EC header is already there, write the VID header */
+	err = ubi_io_write_vid_hdr(ubi, new_seb->pnum, vid_hdr);
+	if (err)
+		goto write_error;
+
+	/* Write the layout volume contents */
+	err = ubi_io_write_data(ubi, vtbl, new_seb->pnum, 0, ubi->vtbl_size);
+	if (err)
+		goto write_error;
+
+	/*
+	 * And add it to the scanning information. Don't delete the old
+	 * @old_seb as it will be deleted and freed in 'ubi_scan_add_used()'.
+	 */
+	err = ubi_scan_add_used(ubi, si, new_seb->pnum, new_seb->ec,
+				vid_hdr, 0);
+	kfree(new_seb);
+	ubi_free_vid_hdr(ubi, vid_hdr);
+	return err;
+
+write_error:
+	if (err == -EIO && ++tries <= 5) {
+		/*
+		 * Probably this physical eraseblock went bad, try to pick
+		 * another one.
+		 */
+		list_add_tail(&new_seb->u.list, &si->corr);
+		goto retry;
+	}
+	kfree(new_seb);
+out_free:
+	ubi_free_vid_hdr(ubi, vid_hdr);
+	return err;
+
+}
+
+/**
+ * process_lvol - process the layout volume.
+ * @ubi: UBI device description object
+ * @si: scanning information
+ * @sv: layout volume scanning information
+ *
+ * This function is responsible for reading the layout volume, ensuring it is
+ * not corrupted, and recovering from corruptions if needed. Returns volume
+ * table in case of success and a negative error code in case of failure.
+ */
+static struct ubi_vtbl_record *process_lvol(struct ubi_device *ubi,
+					    struct ubi_scan_info *si,
+					    struct ubi_scan_volume *sv)
+{
+	int err;
+	struct rb_node *rb;
+	struct ubi_scan_leb *seb;
+	struct ubi_vtbl_record *leb[UBI_LAYOUT_VOLUME_EBS] = { NULL, NULL };
+	int leb_corrupted[UBI_LAYOUT_VOLUME_EBS] = {1, 1};
+
+	/*
+	 * UBI goes through the following steps when it changes the layout
+	 * volume:
+	 * a. erase LEB 0;
+	 * b. write new data to LEB 0;
+	 * c. erase LEB 1;
+	 * d. write new data to LEB 1.
+	 *
+	 * Before the change, both LEBs contain the same data.
+	 *
+	 * Due to unclean reboots, the contents of LEB 0 may be lost, but there
+	 * should LEB 1. So it is OK if LEB 0 is corrupted while LEB 1 is not.
+	 * Similarly, LEB 1 may be lost, but there should be LEB 0. And
+	 * finally, unclean reboots may result in a situation when neither LEB
+	 * 0 nor LEB 1 are corrupted, but they are different. In this case, LEB
+	 * 0 contains more recent information.
+	 *
+	 * So the plan is to first check LEB 0. Then
+	 * a. if LEB 0 is OK, it must be containing the most resent data; then
+	 *    we compare it with LEB 1, and if they are different, we copy LEB
+	 *    0 to LEB 1;
+	 * b. if LEB 0 is corrupted, but LEB 1 has to be OK, and we copy LEB 1
+	 *    to LEB 0.
+	 */
+
+	dbg_msg("check layout volume");
+
+	/* Read both LEB 0 and LEB 1 into memory */
+	ubi_rb_for_each_entry(rb, seb, &sv->root, u.rb) {
+		leb[seb->lnum] = vmalloc(ubi->vtbl_size);
+		if (!leb[seb->lnum]) {
+			err = -ENOMEM;
+			goto out_free;
+		}
+		memset(leb[seb->lnum], 0, ubi->vtbl_size);
+
+		err = ubi_io_read_data(ubi, leb[seb->lnum], seb->pnum, 0,
+				       ubi->vtbl_size);
+		if (err == UBI_IO_BITFLIPS || err == -EBADMSG)
+			/*
+			 * Scrub the PEB later. Note, -EBADMSG indicates an
+			 * uncorrectable ECC error, but we have our own CRC and
+			 * the data will be checked later. If the data is OK,
+			 * the PEB will be scrubbed (because we set
+			 * seb->scrub). If the data is not OK, the contents of
+			 * the PEB will be recovered from the second copy, and
+			 * seb->scrub will be cleared in
+			 * 'ubi_scan_add_used()'.
+			 */
+			seb->scrub = 1;
+		else if (err)
+			goto out_free;
+	}
+
+	err = -EINVAL;
+	if (leb[0]) {
+		leb_corrupted[0] = vtbl_check(ubi, leb[0]);
+		if (leb_corrupted[0] < 0)
+			goto out_free;
+	}
+
+	if (!leb_corrupted[0]) {
+		/* LEB 0 is OK */
+		if (leb[1])
+			leb_corrupted[1] = memcmp(leb[0], leb[1], ubi->vtbl_size);
+		if (leb_corrupted[1]) {
+			ubi_warn("volume table copy #2 is corrupted");
+			err = create_vtbl(ubi, si, 1, leb[0]);
+			if (err)
+				goto out_free;
+			ubi_msg("volume table was restored");
+		}
+
+		/* Both LEB 1 and LEB 2 are OK and consistent */
+		vfree(leb[1]);
+		return leb[0];
+	} else {
+		/* LEB 0 is corrupted or does not exist */
+		if (leb[1]) {
+			leb_corrupted[1] = vtbl_check(ubi, leb[1]);
+			if (leb_corrupted[1] < 0)
+				goto out_free;
+		}
+		if (leb_corrupted[1]) {
+			/* Both LEB 0 and LEB 1 are corrupted */
+			ubi_err("both volume tables are corrupted");
+			goto out_free;
+		}
+
+		ubi_warn("volume table copy #1 is corrupted");
+		err = create_vtbl(ubi, si, 0, leb[1]);
+		if (err)
+			goto out_free;
+		ubi_msg("volume table was restored");
+
+		vfree(leb[0]);
+		return leb[1];
+	}
+
+out_free:
+	vfree(leb[0]);
+	vfree(leb[1]);
+	return ERR_PTR(err);
+}
+
+/**
+ * create_empty_lvol - create empty layout volume.
+ * @ubi: UBI device description object
+ * @si: scanning information
+ *
+ * This function returns volume table contents in case of success and a
+ * negative error code in case of failure.
+ */
+static struct ubi_vtbl_record *create_empty_lvol(struct ubi_device *ubi,
+						 struct ubi_scan_info *si)
+{
+	int i;
+	struct ubi_vtbl_record *vtbl;
+
+	vtbl = vmalloc(ubi->vtbl_size);
+	if (!vtbl)
+		return ERR_PTR(-ENOMEM);
+	memset(vtbl, 0, ubi->vtbl_size);
+
+	for (i = 0; i < ubi->vtbl_slots; i++)
+		memcpy(&vtbl[i], &empty_vtbl_record, UBI_VTBL_RECORD_SIZE);
+
+	for (i = 0; i < UBI_LAYOUT_VOLUME_EBS; i++) {
+		int err;
+
+		err = create_vtbl(ubi, si, i, vtbl);
+		if (err) {
+			vfree(vtbl);
+			return ERR_PTR(err);
+		}
+	}
+
+	return vtbl;
+}
+
+/**
+ * init_volumes - initialize volume information for existing volumes.
+ * @ubi: UBI device description object
+ * @si: scanning information
+ * @vtbl: volume table
+ *
+ * This function allocates volume description objects for existing volumes.
+ * Returns zero in case of success and a negative error code in case of
+ * failure.
+ */
+static int init_volumes(struct ubi_device *ubi, const struct ubi_scan_info *si,
+			const struct ubi_vtbl_record *vtbl)
+{
+	int i, reserved_pebs = 0;
+	struct ubi_scan_volume *sv;
+	struct ubi_volume *vol;
+
+	for (i = 0; i < ubi->vtbl_slots; i++) {
+		cond_resched();
+
+		if (be32_to_cpu(vtbl[i].reserved_pebs) == 0)
+			continue; /* Empty record */
+
+		vol = kzalloc(sizeof(struct ubi_volume), GFP_KERNEL);
+		if (!vol)
+			return -ENOMEM;
+
+		vol->reserved_pebs = be32_to_cpu(vtbl[i].reserved_pebs);
+		vol->alignment = be32_to_cpu(vtbl[i].alignment);
+		vol->data_pad = be32_to_cpu(vtbl[i].data_pad);
+		vol->vol_type = vtbl[i].vol_type == UBI_VID_DYNAMIC ?
+					UBI_DYNAMIC_VOLUME : UBI_STATIC_VOLUME;
+		vol->name_len = be16_to_cpu(vtbl[i].name_len);
+		vol->usable_leb_size = ubi->leb_size - vol->data_pad;
+		memcpy(vol->name, vtbl[i].name, vol->name_len);
+		vol->name[vol->name_len] = '\0';
+		vol->vol_id = i;
+
+		if (vtbl[i].flags & UBI_VTBL_AUTORESIZE_FLG) {
+			/* Auto re-size flag may be set only for one volume */
+			if (ubi->autoresize_vol_id != -1) {
+				ubi_err("more then one auto-resize volume (%d "
+					"and %d)", ubi->autoresize_vol_id, i);
+				kfree(vol);
+				return -EINVAL;
+			}
+
+			ubi->autoresize_vol_id = i;
+		}
+
+		ubi_assert(!ubi->volumes[i]);
+		ubi->volumes[i] = vol;
+		ubi->vol_count += 1;
+		vol->ubi = ubi;
+		reserved_pebs += vol->reserved_pebs;
+
+		/*
+		 * In case of dynamic volume UBI knows nothing about how many
+		 * data is stored there. So assume the whole volume is used.
+		 */
+		if (vol->vol_type == UBI_DYNAMIC_VOLUME) {
+			vol->used_ebs = vol->reserved_pebs;
+			vol->last_eb_bytes = vol->usable_leb_size;
+			vol->used_bytes =
+				(long long)vol->used_ebs * vol->usable_leb_size;
+			continue;
+		}
+
+		/* Static volumes only */
+		sv = ubi_scan_find_sv(si, i);
+		if (!sv) {
+			/*
+			 * No eraseblocks belonging to this volume found. We
+			 * don't actually know whether this static volume is
+			 * completely corrupted or just contains no data. And
+			 * we cannot know this as long as data size is not
+			 * stored on flash. So we just assume the volume is
+			 * empty. FIXME: this should be handled.
+			 */
+			continue;
+		}
+
+		if (sv->leb_count != sv->used_ebs) {
+			/*
+			 * We found a static volume which misses several
+			 * eraseblocks. Treat it as corrupted.
+			 */
+			ubi_warn("static volume %d misses %d LEBs - corrupted",
+				 sv->vol_id, sv->used_ebs - sv->leb_count);
+			vol->corrupted = 1;
+			continue;
+		}
+
+		vol->used_ebs = sv->used_ebs;
+		vol->used_bytes =
+			(long long)(vol->used_ebs - 1) * vol->usable_leb_size;
+		vol->used_bytes += sv->last_data_size;
+		vol->last_eb_bytes = sv->last_data_size;
+	}
+
+	/* And add the layout volume */
+	vol = kzalloc(sizeof(struct ubi_volume), GFP_KERNEL);
+	if (!vol)
+		return -ENOMEM;
+
+	vol->reserved_pebs = UBI_LAYOUT_VOLUME_EBS;
+	vol->alignment = 1;
+	vol->vol_type = UBI_DYNAMIC_VOLUME;
+	vol->name_len = sizeof(UBI_LAYOUT_VOLUME_NAME) - 1;
+	memcpy(vol->name, UBI_LAYOUT_VOLUME_NAME, vol->name_len + 1);
+	vol->usable_leb_size = ubi->leb_size;
+	vol->used_ebs = vol->reserved_pebs;
+	vol->last_eb_bytes = vol->reserved_pebs;
+	vol->used_bytes =
+		(long long)vol->used_ebs * (ubi->leb_size - vol->data_pad);
+	vol->vol_id = UBI_LAYOUT_VOLUME_ID;
+	vol->ref_count = 1;
+
+	ubi_assert(!ubi->volumes[i]);
+	ubi->volumes[vol_id2idx(ubi, vol->vol_id)] = vol;
+	reserved_pebs += vol->reserved_pebs;
+	ubi->vol_count += 1;
+	vol->ubi = ubi;
+
+	if (reserved_pebs > ubi->avail_pebs)
+		ubi_err("not enough PEBs, required %d, available %d",
+			reserved_pebs, ubi->avail_pebs);
+	ubi->rsvd_pebs += reserved_pebs;
+	ubi->avail_pebs -= reserved_pebs;
+
+	return 0;
+}
+
+/**
+ * check_sv - check volume scanning information.
+ * @vol: UBI volume description object
+ * @sv: volume scanning information
+ *
+ * This function returns zero if the volume scanning information is consistent
+ * to the data read from the volume tabla, and %-EINVAL if not.
+ */
+static int check_sv(const struct ubi_volume *vol,
+		    const struct ubi_scan_volume *sv)
+{
+	int err;
+
+	if (sv->highest_lnum >= vol->reserved_pebs) {
+		err = 1;
+		goto bad;
+	}
+	if (sv->leb_count > vol->reserved_pebs) {
+		err = 2;
+		goto bad;
+	}
+	if (sv->vol_type != vol->vol_type) {
+		err = 3;
+		goto bad;
+	}
+	if (sv->used_ebs > vol->reserved_pebs) {
+		err = 4;
+		goto bad;
+	}
+	if (sv->data_pad != vol->data_pad) {
+		err = 5;
+		goto bad;
+	}
+	return 0;
+
+bad:
+	ubi_err("bad scanning information, error %d", err);
+	ubi_dbg_dump_sv(sv);
+	ubi_dbg_dump_vol_info(vol);
+	return -EINVAL;
+}
+
+/**
+ * check_scanning_info - check that scanning information.
+ * @ubi: UBI device description object
+ * @si: scanning information
+ *
+ * Even though we protect on-flash data by CRC checksums, we still don't trust
+ * the media. This function ensures that scanning information is consistent to
+ * the information read from the volume table. Returns zero if the scanning
+ * information is OK and %-EINVAL if it is not.
+ */
+static int check_scanning_info(const struct ubi_device *ubi,
+			       struct ubi_scan_info *si)
+{
+	int err, i;
+	struct ubi_scan_volume *sv;
+	struct ubi_volume *vol;
+
+	if (si->vols_found > UBI_INT_VOL_COUNT + ubi->vtbl_slots) {
+		ubi_err("scanning found %d volumes, maximum is %d + %d",
+			si->vols_found, UBI_INT_VOL_COUNT, ubi->vtbl_slots);
+		return -EINVAL;
+	}
+
+	if (si->highest_vol_id >= ubi->vtbl_slots + UBI_INT_VOL_COUNT &&
+	    si->highest_vol_id < UBI_INTERNAL_VOL_START) {
+		ubi_err("too large volume ID %d found by scanning",
+			si->highest_vol_id);
+		return -EINVAL;
+	}
+
+	for (i = 0; i < ubi->vtbl_slots + UBI_INT_VOL_COUNT; i++) {
+		cond_resched();
+
+		sv = ubi_scan_find_sv(si, i);
+		vol = ubi->volumes[i];
+		if (!vol) {
+			if (sv)
+				ubi_scan_rm_volume(si, sv);
+			continue;
+		}
+
+		if (vol->reserved_pebs == 0) {
+			ubi_assert(i < ubi->vtbl_slots);
+
+			if (!sv)
+				continue;
+
+			/*
+			 * During scanning we found a volume which does not
+			 * exist according to the information in the volume
+			 * table. This must have happened due to an unclean
+			 * reboot while the volume was being removed. Discard
+			 * these eraseblocks.
+			 */
+			ubi_msg("finish volume %d removal", sv->vol_id);
+			ubi_scan_rm_volume(si, sv);
+		} else if (sv) {
+			err = check_sv(vol, sv);
+			if (err)
+				return err;
+		}
+	}
+
+	return 0;
+}
+
+/**
+ * ubi_read_volume_table - read volume table.
+ * information.
+ * @ubi: UBI device description object
+ * @si: scanning information
+ *
+ * This function reads volume table, checks it, recover from errors if needed,
+ * or creates it if needed. Returns zero in case of success and a negative
+ * error code in case of failure.
+ */
+int ubi_read_volume_table(struct ubi_device *ubi, struct ubi_scan_info *si)
+{
+	int i, err;
+	struct ubi_scan_volume *sv;
+
+	empty_vtbl_record.crc = cpu_to_be32(0xf116c36b);
+
+	/*
+	 * The number of supported volumes is limited by the eraseblock size
+	 * and by the UBI_MAX_VOLUMES constant.
+	 */
+	ubi->vtbl_slots = ubi->leb_size / UBI_VTBL_RECORD_SIZE;
+	if (ubi->vtbl_slots > UBI_MAX_VOLUMES)
+		ubi->vtbl_slots = UBI_MAX_VOLUMES;
+
+	ubi->vtbl_size = ubi->vtbl_slots * UBI_VTBL_RECORD_SIZE;
+	ubi->vtbl_size = ALIGN(ubi->vtbl_size, ubi->min_io_size);
+
+	sv = ubi_scan_find_sv(si, UBI_LAYOUT_VOLUME_ID);
+	if (!sv) {
+		/*
+		 * No logical eraseblocks belonging to the layout volume were
+		 * found. This could mean that the flash is just empty. In
+		 * this case we create empty layout volume.
+		 *
+		 * But if flash is not empty this must be a corruption or the
+		 * MTD device just contains garbage.
+		 */
+		if (si->is_empty) {
+			ubi->vtbl = create_empty_lvol(ubi, si);
+			if (IS_ERR(ubi->vtbl))
+				return PTR_ERR(ubi->vtbl);
+		} else {
+			ubi_err("the layout volume was not found");
+			return -EINVAL;
+		}
+	} else {
+		if (sv->leb_count > UBI_LAYOUT_VOLUME_EBS) {
+			/* This must not happen with proper UBI images */
+			dbg_err("too many LEBs (%d) in layout volume",
+				sv->leb_count);
+			return -EINVAL;
+		}
+
+		ubi->vtbl = process_lvol(ubi, si, sv);
+		if (IS_ERR(ubi->vtbl))
+			return PTR_ERR(ubi->vtbl);
+	}
+
+	ubi->avail_pebs = ubi->good_peb_count;
+
+	/*
+	 * The layout volume is OK, initialize the corresponding in-RAM data
+	 * structures.
+	 */
+	err = init_volumes(ubi, si, ubi->vtbl);
+	if (err)
+		goto out_free;
+
+	/*
+	 * Get sure that the scanning information is consistent to the
+	 * information stored in the volume table.
+	 */
+	err = check_scanning_info(ubi, si);
+	if (err)
+		goto out_free;
+
+	return 0;
+
+out_free:
+	vfree(ubi->vtbl);
+	for (i = 0; i < ubi->vtbl_slots + UBI_INT_VOL_COUNT; i++)
+		if (ubi->volumes[i]) {
+			kfree(ubi->volumes[i]);
+			ubi->volumes[i] = NULL;
+		}
+	return err;
+}
+
+#ifdef CONFIG_MTD_UBI_DEBUG_PARANOID
+
+/**
+ * paranoid_vtbl_check - check volume table.
+ * @ubi: UBI device description object
+ */
+static void paranoid_vtbl_check(const struct ubi_device *ubi)
+{
+	if (vtbl_check(ubi, ubi->vtbl)) {
+		ubi_err("paranoid check failed");
+		BUG();
+	}
+}
+
+#endif /* CONFIG_MTD_UBI_DEBUG_PARANOID */
diff --git a/drivers/mtd/ubi/wl.c b/drivers/mtd/ubi/wl.c
new file mode 100644
index 000000000..2f9a5e365
--- /dev/null
+++ b/drivers/mtd/ubi/wl.c
@@ -0,0 +1,1670 @@
+/*
+ * Copyright (c) International Business Machines Corp., 2006
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ * Authors: Artem Bityutskiy (Битюцкий �ртём), Thomas Gleixner
+ */
+
+/*
+ * UBI wear-leveling unit.
+ *
+ * This unit is responsible for wear-leveling. It works in terms of physical
+ * eraseblocks and erase counters and knows nothing about logical eraseblocks,
+ * volumes, etc. From this unit's perspective all physical eraseblocks are of
+ * two types - used and free. Used physical eraseblocks are those that were
+ * "get" by the 'ubi_wl_get_peb()' function, and free physical eraseblocks are
+ * those that were put by the 'ubi_wl_put_peb()' function.
+ *
+ * Physical eraseblocks returned by 'ubi_wl_get_peb()' have only erase counter
+ * header. The rest of the physical eraseblock contains only 0xFF bytes.
+ *
+ * When physical eraseblocks are returned to the WL unit by means of the
+ * 'ubi_wl_put_peb()' function, they are scheduled for erasure. The erasure is
+ * done asynchronously in context of the per-UBI device background thread,
+ * which is also managed by the WL unit.
+ *
+ * The wear-leveling is ensured by means of moving the contents of used
+ * physical eraseblocks with low erase counter to free physical eraseblocks
+ * with high erase counter.
+ *
+ * The 'ubi_wl_get_peb()' function accepts data type hints which help to pick
+ * an "optimal" physical eraseblock. For example, when it is known that the
+ * physical eraseblock will be "put" soon because it contains short-term data,
+ * the WL unit may pick a free physical eraseblock with low erase counter, and
+ * so forth.
+ *
+ * If the WL unit fails to erase a physical eraseblock, it marks it as bad.
+ *
+ * This unit is also responsible for scrubbing. If a bit-flip is detected in a
+ * physical eraseblock, it has to be moved. Technically this is the same as
+ * moving it for wear-leveling reasons.
+ *
+ * As it was said, for the UBI unit all physical eraseblocks are either "free"
+ * or "used". Free eraseblock are kept in the @wl->free RB-tree, while used
+ * eraseblocks are kept in a set of different RB-trees: @wl->used,
+ * @wl->prot.pnum, @wl->prot.aec, and @wl->scrub.
+ *
+ * Note, in this implementation, we keep a small in-RAM object for each physical
+ * eraseblock. This is surely not a scalable solution. But it appears to be good
+ * enough for moderately large flashes and it is simple. In future, one may
+ * re-work this unit and make it more scalable.
+ *
+ * At the moment this unit does not utilize the sequence number, which was
+ * introduced relatively recently. But it would be wise to do this because the
+ * sequence number of a logical eraseblock characterizes how old is it. For
+ * example, when we move a PEB with low erase counter, and we need to pick the
+ * target PEB, we pick a PEB with the highest EC if our PEB is "old" and we
+ * pick target PEB with an average EC if our PEB is not very "old". This is a
+ * room for future re-works of the WL unit.
+ *
+ * FIXME: looks too complex, should be simplified (later).
+ */
+
+#ifdef UBI_LINUX
+#include <linux/slab.h>
+#include <linux/crc32.h>
+#include <linux/freezer.h>
+#include <linux/kthread.h>
+#endif
+
+#include <ubi_uboot.h>
+#include "ubi.h"
+
+/* Number of physical eraseblocks reserved for wear-leveling purposes */
+#define WL_RESERVED_PEBS 1
+
+/*
+ * How many erase cycles are short term, unknown, and long term physical
+ * eraseblocks protected.
+ */
+#define ST_PROTECTION 16
+#define U_PROTECTION  10
+#define LT_PROTECTION 4
+
+/*
+ * Maximum difference between two erase counters. If this threshold is
+ * exceeded, the WL unit starts moving data from used physical eraseblocks with
+ * low erase counter to free physical eraseblocks with high erase counter.
+ */
+#define UBI_WL_THRESHOLD CONFIG_MTD_UBI_WL_THRESHOLD
+
+/*
+ * When a physical eraseblock is moved, the WL unit has to pick the target
+ * physical eraseblock to move to. The simplest way would be just to pick the
+ * one with the highest erase counter. But in certain workloads this could lead
+ * to an unlimited wear of one or few physical eraseblock. Indeed, imagine a
+ * situation when the picked physical eraseblock is constantly erased after the
+ * data is written to it. So, we have a constant which limits the highest erase
+ * counter of the free physical eraseblock to pick. Namely, the WL unit does
+ * not pick eraseblocks with erase counter greater then the lowest erase
+ * counter plus %WL_FREE_MAX_DIFF.
+ */
+#define WL_FREE_MAX_DIFF (2*UBI_WL_THRESHOLD)
+
+/*
+ * Maximum number of consecutive background thread failures which is enough to
+ * switch to read-only mode.
+ */
+#define WL_MAX_FAILURES 32
+
+/**
+ * struct ubi_wl_prot_entry - PEB protection entry.
+ * @rb_pnum: link in the @wl->prot.pnum RB-tree
+ * @rb_aec: link in the @wl->prot.aec RB-tree
+ * @abs_ec: the absolute erase counter value when the protection ends
+ * @e: the wear-leveling entry of the physical eraseblock under protection
+ *
+ * When the WL unit returns a physical eraseblock, the physical eraseblock is
+ * protected from being moved for some "time". For this reason, the physical
+ * eraseblock is not directly moved from the @wl->free tree to the @wl->used
+ * tree. There is one more tree in between where this physical eraseblock is
+ * temporarily stored (@wl->prot).
+ *
+ * All this protection stuff is needed because:
+ *  o we don't want to move physical eraseblocks just after we have given them
+ *    to the user; instead, we first want to let users fill them up with data;
+ *
+ *  o there is a chance that the user will put the physical eraseblock very
+ *    soon, so it makes sense not to move it for some time, but wait; this is
+ *    especially important in case of "short term" physical eraseblocks.
+ *
+ * Physical eraseblocks stay protected only for limited time. But the "time" is
+ * measured in erase cycles in this case. This is implemented with help of the
+ * absolute erase counter (@wl->abs_ec). When it reaches certain value, the
+ * physical eraseblocks are moved from the protection trees (@wl->prot.*) to
+ * the @wl->used tree.
+ *
+ * Protected physical eraseblocks are searched by physical eraseblock number
+ * (when they are put) and by the absolute erase counter (to check if it is
+ * time to move them to the @wl->used tree). So there are actually 2 RB-trees
+ * storing the protected physical eraseblocks: @wl->prot.pnum and
+ * @wl->prot.aec. They are referred to as the "protection" trees. The
+ * first one is indexed by the physical eraseblock number. The second one is
+ * indexed by the absolute erase counter. Both trees store
+ * &struct ubi_wl_prot_entry objects.
+ *
+ * Each physical eraseblock has 2 main states: free and used. The former state
+ * corresponds to the @wl->free tree. The latter state is split up on several
+ * sub-states:
+ * o the WL movement is allowed (@wl->used tree);
+ * o the WL movement is temporarily prohibited (@wl->prot.pnum and
+ * @wl->prot.aec trees);
+ * o scrubbing is needed (@wl->scrub tree).
+ *
+ * Depending on the sub-state, wear-leveling entries of the used physical
+ * eraseblocks may be kept in one of those trees.
+ */
+struct ubi_wl_prot_entry {
+	struct rb_node rb_pnum;
+	struct rb_node rb_aec;
+	unsigned long long abs_ec;
+	struct ubi_wl_entry *e;
+};
+
+/**
+ * struct ubi_work - UBI work description data structure.
+ * @list: a link in the list of pending works
+ * @func: worker function
+ * @priv: private data of the worker function
+ *
+ * @e: physical eraseblock to erase
+ * @torture: if the physical eraseblock has to be tortured
+ *
+ * The @func pointer points to the worker function. If the @cancel argument is
+ * not zero, the worker has to free the resources and exit immediately. The
+ * worker has to return zero in case of success and a negative error code in
+ * case of failure.
+ */
+struct ubi_work {
+	struct list_head list;
+	int (*func)(struct ubi_device *ubi, struct ubi_work *wrk, int cancel);
+	/* The below fields are only relevant to erasure works */
+	struct ubi_wl_entry *e;
+	int torture;
+};
+
+#ifdef CONFIG_MTD_UBI_DEBUG_PARANOID
+static int paranoid_check_ec(struct ubi_device *ubi, int pnum, int ec);
+static int paranoid_check_in_wl_tree(struct ubi_wl_entry *e,
+				     struct rb_root *root);
+#else
+#define paranoid_check_ec(ubi, pnum, ec) 0
+#define paranoid_check_in_wl_tree(e, root)
+#endif
+
+/**
+ * wl_tree_add - add a wear-leveling entry to a WL RB-tree.
+ * @e: the wear-leveling entry to add
+ * @root: the root of the tree
+ *
+ * Note, we use (erase counter, physical eraseblock number) pairs as keys in
+ * the @ubi->used and @ubi->free RB-trees.
+ */
+static void wl_tree_add(struct ubi_wl_entry *e, struct rb_root *root)
+{
+	struct rb_node **p, *parent = NULL;
+
+	p = &root->rb_node;
+	while (*p) {
+		struct ubi_wl_entry *e1;
+
+		parent = *p;
+		e1 = rb_entry(parent, struct ubi_wl_entry, rb);
+
+		if (e->ec < e1->ec)
+			p = &(*p)->rb_left;
+		else if (e->ec > e1->ec)
+			p = &(*p)->rb_right;
+		else {
+			ubi_assert(e->pnum != e1->pnum);
+			if (e->pnum < e1->pnum)
+				p = &(*p)->rb_left;
+			else
+				p = &(*p)->rb_right;
+		}
+	}
+
+	rb_link_node(&e->rb, parent, p);
+	rb_insert_color(&e->rb, root);
+}
+
+/**
+ * do_work - do one pending work.
+ * @ubi: UBI device description object
+ *
+ * This function returns zero in case of success and a negative error code in
+ * case of failure.
+ */
+static int do_work(struct ubi_device *ubi)
+{
+	int err;
+	struct ubi_work *wrk;
+
+	cond_resched();
+
+	/*
+	 * @ubi->work_sem is used to synchronize with the workers. Workers take
+	 * it in read mode, so many of them may be doing works at a time. But
+	 * the queue flush code has to be sure the whole queue of works is
+	 * done, and it takes the mutex in write mode.
+	 */
+	down_read(&ubi->work_sem);
+	spin_lock(&ubi->wl_lock);
+	if (list_empty(&ubi->works)) {
+		spin_unlock(&ubi->wl_lock);
+		up_read(&ubi->work_sem);
+		return 0;
+	}
+
+	wrk = list_entry(ubi->works.next, struct ubi_work, list);
+	list_del(&wrk->list);
+	ubi->works_count -= 1;
+	ubi_assert(ubi->works_count >= 0);
+	spin_unlock(&ubi->wl_lock);
+
+	/*
+	 * Call the worker function. Do not touch the work structure
+	 * after this call as it will have been freed or reused by that
+	 * time by the worker function.
+	 */
+	err = wrk->func(ubi, wrk, 0);
+	if (err)
+		ubi_err("work failed with error code %d", err);
+	up_read(&ubi->work_sem);
+
+	return err;
+}
+
+/**
+ * produce_free_peb - produce a free physical eraseblock.
+ * @ubi: UBI device description object
+ *
+ * This function tries to make a free PEB by means of synchronous execution of
+ * pending works. This may be needed if, for example the background thread is
+ * disabled. Returns zero in case of success and a negative error code in case
+ * of failure.
+ */
+static int produce_free_peb(struct ubi_device *ubi)
+{
+	int err;
+
+	spin_lock(&ubi->wl_lock);
+	while (!ubi->free.rb_node) {
+		spin_unlock(&ubi->wl_lock);
+
+		dbg_wl("do one work synchronously");
+		err = do_work(ubi);
+		if (err)
+			return err;
+
+		spin_lock(&ubi->wl_lock);
+	}
+	spin_unlock(&ubi->wl_lock);
+
+	return 0;
+}
+
+/**
+ * in_wl_tree - check if wear-leveling entry is present in a WL RB-tree.
+ * @e: the wear-leveling entry to check
+ * @root: the root of the tree
+ *
+ * This function returns non-zero if @e is in the @root RB-tree and zero if it
+ * is not.
+ */
+static int in_wl_tree(struct ubi_wl_entry *e, struct rb_root *root)
+{
+	struct rb_node *p;
+
+	p = root->rb_node;
+	while (p) {
+		struct ubi_wl_entry *e1;
+
+		e1 = rb_entry(p, struct ubi_wl_entry, rb);
+
+		if (e->pnum == e1->pnum) {
+			ubi_assert(e == e1);
+			return 1;
+		}
+
+		if (e->ec < e1->ec)
+			p = p->rb_left;
+		else if (e->ec > e1->ec)
+			p = p->rb_right;
+		else {
+			ubi_assert(e->pnum != e1->pnum);
+			if (e->pnum < e1->pnum)
+				p = p->rb_left;
+			else
+				p = p->rb_right;
+		}
+	}
+
+	return 0;
+}
+
+/**
+ * prot_tree_add - add physical eraseblock to protection trees.
+ * @ubi: UBI device description object
+ * @e: the physical eraseblock to add
+ * @pe: protection entry object to use
+ * @abs_ec: absolute erase counter value when this physical eraseblock has
+ * to be removed from the protection trees.
+ *
+ * @wl->lock has to be locked.
+ */
+static void prot_tree_add(struct ubi_device *ubi, struct ubi_wl_entry *e,
+			  struct ubi_wl_prot_entry *pe, int abs_ec)
+{
+	struct rb_node **p, *parent = NULL;
+	struct ubi_wl_prot_entry *pe1;
+
+	pe->e = e;
+	pe->abs_ec = ubi->abs_ec + abs_ec;
+
+	p = &ubi->prot.pnum.rb_node;
+	while (*p) {
+		parent = *p;
+		pe1 = rb_entry(parent, struct ubi_wl_prot_entry, rb_pnum);
+
+		if (e->pnum < pe1->e->pnum)
+			p = &(*p)->rb_left;
+		else
+			p = &(*p)->rb_right;
+	}
+	rb_link_node(&pe->rb_pnum, parent, p);
+	rb_insert_color(&pe->rb_pnum, &ubi->prot.pnum);
+
+	p = &ubi->prot.aec.rb_node;
+	parent = NULL;
+	while (*p) {
+		parent = *p;
+		pe1 = rb_entry(parent, struct ubi_wl_prot_entry, rb_aec);
+
+		if (pe->abs_ec < pe1->abs_ec)
+			p = &(*p)->rb_left;
+		else
+			p = &(*p)->rb_right;
+	}
+	rb_link_node(&pe->rb_aec, parent, p);
+	rb_insert_color(&pe->rb_aec, &ubi->prot.aec);
+}
+
+/**
+ * find_wl_entry - find wear-leveling entry closest to certain erase counter.
+ * @root: the RB-tree where to look for
+ * @max: highest possible erase counter
+ *
+ * This function looks for a wear leveling entry with erase counter closest to
+ * @max and less then @max.
+ */
+static struct ubi_wl_entry *find_wl_entry(struct rb_root *root, int max)
+{
+	struct rb_node *p;
+	struct ubi_wl_entry *e;
+
+	e = rb_entry(rb_first(root), struct ubi_wl_entry, rb);
+	max += e->ec;
+
+	p = root->rb_node;
+	while (p) {
+		struct ubi_wl_entry *e1;
+
+		e1 = rb_entry(p, struct ubi_wl_entry, rb);
+		if (e1->ec >= max)
+			p = p->rb_left;
+		else {
+			p = p->rb_right;
+			e = e1;
+		}
+	}
+
+	return e;
+}
+
+/**
+ * ubi_wl_get_peb - get a physical eraseblock.
+ * @ubi: UBI device description object
+ * @dtype: type of data which will be stored in this physical eraseblock
+ *
+ * This function returns a physical eraseblock in case of success and a
+ * negative error code in case of failure. Might sleep.
+ */
+int ubi_wl_get_peb(struct ubi_device *ubi, int dtype)
+{
+	int err, protect, medium_ec;
+	struct ubi_wl_entry *e, *first, *last;
+	struct ubi_wl_prot_entry *pe;
+
+	ubi_assert(dtype == UBI_LONGTERM || dtype == UBI_SHORTTERM ||
+		   dtype == UBI_UNKNOWN);
+
+	pe = kmalloc(sizeof(struct ubi_wl_prot_entry), GFP_NOFS);
+	if (!pe)
+		return -ENOMEM;
+
+retry:
+	spin_lock(&ubi->wl_lock);
+	if (!ubi->free.rb_node) {
+		if (ubi->works_count == 0) {
+			ubi_assert(list_empty(&ubi->works));
+			ubi_err("no free eraseblocks");
+			spin_unlock(&ubi->wl_lock);
+			kfree(pe);
+			return -ENOSPC;
+		}
+		spin_unlock(&ubi->wl_lock);
+
+		err = produce_free_peb(ubi);
+		if (err < 0) {
+			kfree(pe);
+			return err;
+		}
+		goto retry;
+	}
+
+	switch (dtype) {
+		case UBI_LONGTERM:
+			/*
+			 * For long term data we pick a physical eraseblock
+			 * with high erase counter. But the highest erase
+			 * counter we can pick is bounded by the the lowest
+			 * erase counter plus %WL_FREE_MAX_DIFF.
+			 */
+			e = find_wl_entry(&ubi->free, WL_FREE_MAX_DIFF);
+			protect = LT_PROTECTION;
+			break;
+		case UBI_UNKNOWN:
+			/*
+			 * For unknown data we pick a physical eraseblock with
+			 * medium erase counter. But we by no means can pick a
+			 * physical eraseblock with erase counter greater or
+			 * equivalent than the lowest erase counter plus
+			 * %WL_FREE_MAX_DIFF.
+			 */
+			first = rb_entry(rb_first(&ubi->free),
+					 struct ubi_wl_entry, rb);
+			last = rb_entry(rb_last(&ubi->free),
+					struct ubi_wl_entry, rb);
+
+			if (last->ec - first->ec < WL_FREE_MAX_DIFF)
+				e = rb_entry(ubi->free.rb_node,
+						struct ubi_wl_entry, rb);
+			else {
+				medium_ec = (first->ec + WL_FREE_MAX_DIFF)/2;
+				e = find_wl_entry(&ubi->free, medium_ec);
+			}
+			protect = U_PROTECTION;
+			break;
+		case UBI_SHORTTERM:
+			/*
+			 * For short term data we pick a physical eraseblock
+			 * with the lowest erase counter as we expect it will
+			 * be erased soon.
+			 */
+			e = rb_entry(rb_first(&ubi->free),
+				     struct ubi_wl_entry, rb);
+			protect = ST_PROTECTION;
+			break;
+		default:
+			protect = 0;
+			e = NULL;
+			BUG();
+	}
+
+	/*
+	 * Move the physical eraseblock to the protection trees where it will
+	 * be protected from being moved for some time.
+	 */
+	paranoid_check_in_wl_tree(e, &ubi->free);
+	rb_erase(&e->rb, &ubi->free);
+	prot_tree_add(ubi, e, pe, protect);
+
+	dbg_wl("PEB %d EC %d, protection %d", e->pnum, e->ec, protect);
+	spin_unlock(&ubi->wl_lock);
+
+	return e->pnum;
+}
+
+/**
+ * prot_tree_del - remove a physical eraseblock from the protection trees
+ * @ubi: UBI device description object
+ * @pnum: the physical eraseblock to remove
+ *
+ * This function returns PEB @pnum from the protection trees and returns zero
+ * in case of success and %-ENODEV if the PEB was not found in the protection
+ * trees.
+ */
+static int prot_tree_del(struct ubi_device *ubi, int pnum)
+{
+	struct rb_node *p;
+	struct ubi_wl_prot_entry *pe = NULL;
+
+	p = ubi->prot.pnum.rb_node;
+	while (p) {
+
+		pe = rb_entry(p, struct ubi_wl_prot_entry, rb_pnum);
+
+		if (pnum == pe->e->pnum)
+			goto found;
+
+		if (pnum < pe->e->pnum)
+			p = p->rb_left;
+		else
+			p = p->rb_right;
+	}
+
+	return -ENODEV;
+
+found:
+	ubi_assert(pe->e->pnum == pnum);
+	rb_erase(&pe->rb_aec, &ubi->prot.aec);
+	rb_erase(&pe->rb_pnum, &ubi->prot.pnum);
+	kfree(pe);
+	return 0;
+}
+
+/**
+ * sync_erase - synchronously erase a physical eraseblock.
+ * @ubi: UBI device description object
+ * @e: the the physical eraseblock to erase
+ * @torture: if the physical eraseblock has to be tortured
+ *
+ * This function returns zero in case of success and a negative error code in
+ * case of failure.
+ */
+static int sync_erase(struct ubi_device *ubi, struct ubi_wl_entry *e, int torture)
+{
+	int err;
+	struct ubi_ec_hdr *ec_hdr;
+	unsigned long long ec = e->ec;
+
+	dbg_wl("erase PEB %d, old EC %llu", e->pnum, ec);
+
+	err = paranoid_check_ec(ubi, e->pnum, e->ec);
+	if (err > 0)
+		return -EINVAL;
+
+	ec_hdr = kzalloc(ubi->ec_hdr_alsize, GFP_NOFS);
+	if (!ec_hdr)
+		return -ENOMEM;
+
+	err = ubi_io_sync_erase(ubi, e->pnum, torture);
+	if (err < 0)
+		goto out_free;
+
+	ec += err;
+	if (ec > UBI_MAX_ERASECOUNTER) {
+		/*
+		 * Erase counter overflow. Upgrade UBI and use 64-bit
+		 * erase counters internally.
+		 */
+		ubi_err("erase counter overflow at PEB %d, EC %llu",
+			e->pnum, ec);
+		err = -EINVAL;
+		goto out_free;
+	}
+
+	dbg_wl("erased PEB %d, new EC %llu", e->pnum, ec);
+
+	ec_hdr->ec = cpu_to_be64(ec);
+
+	err = ubi_io_write_ec_hdr(ubi, e->pnum, ec_hdr);
+	if (err)
+		goto out_free;
+
+	e->ec = ec;
+	spin_lock(&ubi->wl_lock);
+	if (e->ec > ubi->max_ec)
+		ubi->max_ec = e->ec;
+	spin_unlock(&ubi->wl_lock);
+
+out_free:
+	kfree(ec_hdr);
+	return err;
+}
+
+/**
+ * check_protection_over - check if it is time to stop protecting some
+ * physical eraseblocks.
+ * @ubi: UBI device description object
+ *
+ * This function is called after each erase operation, when the absolute erase
+ * counter is incremented, to check if some physical eraseblock  have not to be
+ * protected any longer. These physical eraseblocks are moved from the
+ * protection trees to the used tree.
+ */
+static void check_protection_over(struct ubi_device *ubi)
+{
+	struct ubi_wl_prot_entry *pe;
+
+	/*
+	 * There may be several protected physical eraseblock to remove,
+	 * process them all.
+	 */
+	while (1) {
+		spin_lock(&ubi->wl_lock);
+		if (!ubi->prot.aec.rb_node) {
+			spin_unlock(&ubi->wl_lock);
+			break;
+		}
+
+		pe = rb_entry(rb_first(&ubi->prot.aec),
+			      struct ubi_wl_prot_entry, rb_aec);
+
+		if (pe->abs_ec > ubi->abs_ec) {
+			spin_unlock(&ubi->wl_lock);
+			break;
+		}
+
+		dbg_wl("PEB %d protection over, abs_ec %llu, PEB abs_ec %llu",
+		       pe->e->pnum, ubi->abs_ec, pe->abs_ec);
+		rb_erase(&pe->rb_aec, &ubi->prot.aec);
+		rb_erase(&pe->rb_pnum, &ubi->prot.pnum);
+		wl_tree_add(pe->e, &ubi->used);
+		spin_unlock(&ubi->wl_lock);
+
+		kfree(pe);
+		cond_resched();
+	}
+}
+
+/**
+ * schedule_ubi_work - schedule a work.
+ * @ubi: UBI device description object
+ * @wrk: the work to schedule
+ *
+ * This function enqueues a work defined by @wrk to the tail of the pending
+ * works list.
+ */
+static void schedule_ubi_work(struct ubi_device *ubi, struct ubi_work *wrk)
+{
+	spin_lock(&ubi->wl_lock);
+	list_add_tail(&wrk->list, &ubi->works);
+	ubi_assert(ubi->works_count >= 0);
+	ubi->works_count += 1;
+	if (ubi->thread_enabled)
+		wake_up_process(ubi->bgt_thread);
+	spin_unlock(&ubi->wl_lock);
+}
+
+static int erase_worker(struct ubi_device *ubi, struct ubi_work *wl_wrk,
+			int cancel);
+
+/**
+ * schedule_erase - schedule an erase work.
+ * @ubi: UBI device description object
+ * @e: the WL entry of the physical eraseblock to erase
+ * @torture: if the physical eraseblock has to be tortured
+ *
+ * This function returns zero in case of success and a %-ENOMEM in case of
+ * failure.
+ */
+static int schedule_erase(struct ubi_device *ubi, struct ubi_wl_entry *e,
+			  int torture)
+{
+	struct ubi_work *wl_wrk;
+
+	dbg_wl("schedule erasure of PEB %d, EC %d, torture %d",
+	       e->pnum, e->ec, torture);
+
+	wl_wrk = kmalloc(sizeof(struct ubi_work), GFP_NOFS);
+	if (!wl_wrk)
+		return -ENOMEM;
+
+	wl_wrk->func = &erase_worker;
+	wl_wrk->e = e;
+	wl_wrk->torture = torture;
+
+	schedule_ubi_work(ubi, wl_wrk);
+	return 0;
+}
+
+/**
+ * wear_leveling_worker - wear-leveling worker function.
+ * @ubi: UBI device description object
+ * @wrk: the work object
+ * @cancel: non-zero if the worker has to free memory and exit
+ *
+ * This function copies a more worn out physical eraseblock to a less worn out
+ * one. Returns zero in case of success and a negative error code in case of
+ * failure.
+ */
+static int wear_leveling_worker(struct ubi_device *ubi, struct ubi_work *wrk,
+				int cancel)
+{
+	int err, put = 0, scrubbing = 0, protect = 0;
+	struct ubi_wl_prot_entry *uninitialized_var(pe);
+	struct ubi_wl_entry *e1, *e2;
+	struct ubi_vid_hdr *vid_hdr;
+
+	kfree(wrk);
+
+	if (cancel)
+		return 0;
+
+	vid_hdr = ubi_zalloc_vid_hdr(ubi, GFP_NOFS);
+	if (!vid_hdr)
+		return -ENOMEM;
+
+	mutex_lock(&ubi->move_mutex);
+	spin_lock(&ubi->wl_lock);
+	ubi_assert(!ubi->move_from && !ubi->move_to);
+	ubi_assert(!ubi->move_to_put);
+
+	if (!ubi->free.rb_node ||
+	    (!ubi->used.rb_node && !ubi->scrub.rb_node)) {
+		/*
+		 * No free physical eraseblocks? Well, they must be waiting in
+		 * the queue to be erased. Cancel movement - it will be
+		 * triggered again when a free physical eraseblock appears.
+		 *
+		 * No used physical eraseblocks? They must be temporarily
+		 * protected from being moved. They will be moved to the
+		 * @ubi->used tree later and the wear-leveling will be
+		 * triggered again.
+		 */
+		dbg_wl("cancel WL, a list is empty: free %d, used %d",
+		       !ubi->free.rb_node, !ubi->used.rb_node);
+		goto out_cancel;
+	}
+
+	if (!ubi->scrub.rb_node) {
+		/*
+		 * Now pick the least worn-out used physical eraseblock and a
+		 * highly worn-out free physical eraseblock. If the erase
+		 * counters differ much enough, start wear-leveling.
+		 */
+		e1 = rb_entry(rb_first(&ubi->used), struct ubi_wl_entry, rb);
+		e2 = find_wl_entry(&ubi->free, WL_FREE_MAX_DIFF);
+
+		if (!(e2->ec - e1->ec >= UBI_WL_THRESHOLD)) {
+			dbg_wl("no WL needed: min used EC %d, max free EC %d",
+			       e1->ec, e2->ec);
+			goto out_cancel;
+		}
+		paranoid_check_in_wl_tree(e1, &ubi->used);
+		rb_erase(&e1->rb, &ubi->used);
+		dbg_wl("move PEB %d EC %d to PEB %d EC %d",
+		       e1->pnum, e1->ec, e2->pnum, e2->ec);
+	} else {
+		/* Perform scrubbing */
+		scrubbing = 1;
+		e1 = rb_entry(rb_first(&ubi->scrub), struct ubi_wl_entry, rb);
+		e2 = find_wl_entry(&ubi->free, WL_FREE_MAX_DIFF);
+		paranoid_check_in_wl_tree(e1, &ubi->scrub);
+		rb_erase(&e1->rb, &ubi->scrub);
+		dbg_wl("scrub PEB %d to PEB %d", e1->pnum, e2->pnum);
+	}
+
+	paranoid_check_in_wl_tree(e2, &ubi->free);
+	rb_erase(&e2->rb, &ubi->free);
+	ubi->move_from = e1;
+	ubi->move_to = e2;
+	spin_unlock(&ubi->wl_lock);
+
+	/*
+	 * Now we are going to copy physical eraseblock @e1->pnum to @e2->pnum.
+	 * We so far do not know which logical eraseblock our physical
+	 * eraseblock (@e1) belongs to. We have to read the volume identifier
+	 * header first.
+	 *
+	 * Note, we are protected from this PEB being unmapped and erased. The
+	 * 'ubi_wl_put_peb()' would wait for moving to be finished if the PEB
+	 * which is being moved was unmapped.
+	 */
+
+	err = ubi_io_read_vid_hdr(ubi, e1->pnum, vid_hdr, 0);
+	if (err && err != UBI_IO_BITFLIPS) {
+		if (err == UBI_IO_PEB_FREE) {
+			/*
+			 * We are trying to move PEB without a VID header. UBI
+			 * always write VID headers shortly after the PEB was
+			 * given, so we have a situation when it did not have
+			 * chance to write it down because it was preempted.
+			 * Just re-schedule the work, so that next time it will
+			 * likely have the VID header in place.
+			 */
+			dbg_wl("PEB %d has no VID header", e1->pnum);
+			goto out_not_moved;
+		}
+
+		ubi_err("error %d while reading VID header from PEB %d",
+			err, e1->pnum);
+		if (err > 0)
+			err = -EIO;
+		goto out_error;
+	}
+
+	err = ubi_eba_copy_leb(ubi, e1->pnum, e2->pnum, vid_hdr);
+	if (err) {
+
+		if (err < 0)
+			goto out_error;
+		if (err == 1)
+			goto out_not_moved;
+
+		/*
+		 * For some reason the LEB was not moved - it might be because
+		 * the volume is being deleted. We should prevent this PEB from
+		 * being selected for wear-levelling movement for some "time",
+		 * so put it to the protection tree.
+		 */
+
+		dbg_wl("cancelled moving PEB %d", e1->pnum);
+		pe = kmalloc(sizeof(struct ubi_wl_prot_entry), GFP_NOFS);
+		if (!pe) {
+			err = -ENOMEM;
+			goto out_error;
+		}
+
+		protect = 1;
+	}
+
+	ubi_free_vid_hdr(ubi, vid_hdr);
+	spin_lock(&ubi->wl_lock);
+	if (protect)
+		prot_tree_add(ubi, e1, pe, protect);
+	if (!ubi->move_to_put)
+		wl_tree_add(e2, &ubi->used);
+	else
+		put = 1;
+	ubi->move_from = ubi->move_to = NULL;
+	ubi->move_to_put = ubi->wl_scheduled = 0;
+	spin_unlock(&ubi->wl_lock);
+
+	if (put) {
+		/*
+		 * Well, the target PEB was put meanwhile, schedule it for
+		 * erasure.
+		 */
+		dbg_wl("PEB %d was put meanwhile, erase", e2->pnum);
+		err = schedule_erase(ubi, e2, 0);
+		if (err)
+			goto out_error;
+	}
+
+	if (!protect) {
+		err = schedule_erase(ubi, e1, 0);
+		if (err)
+			goto out_error;
+	}
+
+
+	dbg_wl("done");
+	mutex_unlock(&ubi->move_mutex);
+	return 0;
+
+	/*
+	 * For some reasons the LEB was not moved, might be an error, might be
+	 * something else. @e1 was not changed, so return it back. @e2 might
+	 * be changed, schedule it for erasure.
+	 */
+out_not_moved:
+	ubi_free_vid_hdr(ubi, vid_hdr);
+	spin_lock(&ubi->wl_lock);
+	if (scrubbing)
+		wl_tree_add(e1, &ubi->scrub);
+	else
+		wl_tree_add(e1, &ubi->used);
+	ubi->move_from = ubi->move_to = NULL;
+	ubi->move_to_put = ubi->wl_scheduled = 0;
+	spin_unlock(&ubi->wl_lock);
+
+	err = schedule_erase(ubi, e2, 0);
+	if (err)
+		goto out_error;
+
+	mutex_unlock(&ubi->move_mutex);
+	return 0;
+
+out_error:
+	ubi_err("error %d while moving PEB %d to PEB %d",
+		err, e1->pnum, e2->pnum);
+
+	ubi_free_vid_hdr(ubi, vid_hdr);
+	spin_lock(&ubi->wl_lock);
+	ubi->move_from = ubi->move_to = NULL;
+	ubi->move_to_put = ubi->wl_scheduled = 0;
+	spin_unlock(&ubi->wl_lock);
+
+	kmem_cache_free(ubi_wl_entry_slab, e1);
+	kmem_cache_free(ubi_wl_entry_slab, e2);
+	ubi_ro_mode(ubi);
+
+	mutex_unlock(&ubi->move_mutex);
+	return err;
+
+out_cancel:
+	ubi->wl_scheduled = 0;
+	spin_unlock(&ubi->wl_lock);
+	mutex_unlock(&ubi->move_mutex);
+	ubi_free_vid_hdr(ubi, vid_hdr);
+	return 0;
+}
+
+/**
+ * ensure_wear_leveling - schedule wear-leveling if it is needed.
+ * @ubi: UBI device description object
+ *
+ * This function checks if it is time to start wear-leveling and schedules it
+ * if yes. This function returns zero in case of success and a negative error
+ * code in case of failure.
+ */
+static int ensure_wear_leveling(struct ubi_device *ubi)
+{
+	int err = 0;
+	struct ubi_wl_entry *e1;
+	struct ubi_wl_entry *e2;
+	struct ubi_work *wrk;
+
+	spin_lock(&ubi->wl_lock);
+	if (ubi->wl_scheduled)
+		/* Wear-leveling is already in the work queue */
+		goto out_unlock;
+
+	/*
+	 * If the ubi->scrub tree is not empty, scrubbing is needed, and the
+	 * the WL worker has to be scheduled anyway.
+	 */
+	if (!ubi->scrub.rb_node) {
+		if (!ubi->used.rb_node || !ubi->free.rb_node)
+			/* No physical eraseblocks - no deal */
+			goto out_unlock;
+
+		/*
+		 * We schedule wear-leveling only if the difference between the
+		 * lowest erase counter of used physical eraseblocks and a high
+		 * erase counter of free physical eraseblocks is greater then
+		 * %UBI_WL_THRESHOLD.
+		 */
+		e1 = rb_entry(rb_first(&ubi->used), struct ubi_wl_entry, rb);
+		e2 = find_wl_entry(&ubi->free, WL_FREE_MAX_DIFF);
+
+		if (!(e2->ec - e1->ec >= UBI_WL_THRESHOLD))
+			goto out_unlock;
+		dbg_wl("schedule wear-leveling");
+	} else
+		dbg_wl("schedule scrubbing");
+
+	ubi->wl_scheduled = 1;
+	spin_unlock(&ubi->wl_lock);
+
+	wrk = kmalloc(sizeof(struct ubi_work), GFP_NOFS);
+	if (!wrk) {
+		err = -ENOMEM;
+		goto out_cancel;
+	}
+
+	wrk->func = &wear_leveling_worker;
+	schedule_ubi_work(ubi, wrk);
+	return err;
+
+out_cancel:
+	spin_lock(&ubi->wl_lock);
+	ubi->wl_scheduled = 0;
+out_unlock:
+	spin_unlock(&ubi->wl_lock);
+	return err;
+}
+
+/**
+ * erase_worker - physical eraseblock erase worker function.
+ * @ubi: UBI device description object
+ * @wl_wrk: the work object
+ * @cancel: non-zero if the worker has to free memory and exit
+ *
+ * This function erases a physical eraseblock and perform torture testing if
+ * needed. It also takes care about marking the physical eraseblock bad if
+ * needed. Returns zero in case of success and a negative error code in case of
+ * failure.
+ */
+static int erase_worker(struct ubi_device *ubi, struct ubi_work *wl_wrk,
+			int cancel)
+{
+	struct ubi_wl_entry *e = wl_wrk->e;
+	int pnum = e->pnum, err, need;
+
+	if (cancel) {
+		dbg_wl("cancel erasure of PEB %d EC %d", pnum, e->ec);
+		kfree(wl_wrk);
+		kmem_cache_free(ubi_wl_entry_slab, e);
+		return 0;
+	}
+
+	dbg_wl("erase PEB %d EC %d", pnum, e->ec);
+
+	err = sync_erase(ubi, e, wl_wrk->torture);
+	if (!err) {
+		/* Fine, we've erased it successfully */
+		kfree(wl_wrk);
+
+		spin_lock(&ubi->wl_lock);
+		ubi->abs_ec += 1;
+		wl_tree_add(e, &ubi->free);
+		spin_unlock(&ubi->wl_lock);
+
+		/*
+		 * One more erase operation has happened, take care about protected
+		 * physical eraseblocks.
+		 */
+		check_protection_over(ubi);
+
+		/* And take care about wear-leveling */
+		err = ensure_wear_leveling(ubi);
+		return err;
+	}
+
+	ubi_err("failed to erase PEB %d, error %d", pnum, err);
+	kfree(wl_wrk);
+	kmem_cache_free(ubi_wl_entry_slab, e);
+
+	if (err == -EINTR || err == -ENOMEM || err == -EAGAIN ||
+	    err == -EBUSY) {
+		int err1;
+
+		/* Re-schedule the LEB for erasure */
+		err1 = schedule_erase(ubi, e, 0);
+		if (err1) {
+			err = err1;
+			goto out_ro;
+		}
+		return err;
+	} else if (err != -EIO) {
+		/*
+		 * If this is not %-EIO, we have no idea what to do. Scheduling
+		 * this physical eraseblock for erasure again would cause
+		 * errors again and again. Well, lets switch to RO mode.
+		 */
+		goto out_ro;
+	}
+
+	/* It is %-EIO, the PEB went bad */
+
+	if (!ubi->bad_allowed) {
+		ubi_err("bad physical eraseblock %d detected", pnum);
+		goto out_ro;
+	}
+
+	spin_lock(&ubi->volumes_lock);
+	need = ubi->beb_rsvd_level - ubi->beb_rsvd_pebs + 1;
+	if (need > 0) {
+		need = ubi->avail_pebs >= need ? need : ubi->avail_pebs;
+		ubi->avail_pebs -= need;
+		ubi->rsvd_pebs += need;
+		ubi->beb_rsvd_pebs += need;
+		if (need > 0)
+			ubi_msg("reserve more %d PEBs", need);
+	}
+
+	if (ubi->beb_rsvd_pebs == 0) {
+		spin_unlock(&ubi->volumes_lock);
+		ubi_err("no reserved physical eraseblocks");
+		goto out_ro;
+	}
+
+	spin_unlock(&ubi->volumes_lock);
+	ubi_msg("mark PEB %d as bad", pnum);
+
+	err = ubi_io_mark_bad(ubi, pnum);
+	if (err)
+		goto out_ro;
+
+	spin_lock(&ubi->volumes_lock);
+	ubi->beb_rsvd_pebs -= 1;
+	ubi->bad_peb_count += 1;
+	ubi->good_peb_count -= 1;
+	ubi_calculate_reserved(ubi);
+	if (ubi->beb_rsvd_pebs == 0)
+		ubi_warn("last PEB from the reserved pool was used");
+	spin_unlock(&ubi->volumes_lock);
+
+	return err;
+
+out_ro:
+	ubi_ro_mode(ubi);
+	return err;
+}
+
+/**
+ * ubi_wl_put_peb - return a physical eraseblock to the wear-leveling unit.
+ * @ubi: UBI device description object
+ * @pnum: physical eraseblock to return
+ * @torture: if this physical eraseblock has to be tortured
+ *
+ * This function is called to return physical eraseblock @pnum to the pool of
+ * free physical eraseblocks. The @torture flag has to be set if an I/O error
+ * occurred to this @pnum and it has to be tested. This function returns zero
+ * in case of success, and a negative error code in case of failure.
+ */
+int ubi_wl_put_peb(struct ubi_device *ubi, int pnum, int torture)
+{
+	int err;
+	struct ubi_wl_entry *e;
+
+	dbg_wl("PEB %d", pnum);
+	ubi_assert(pnum >= 0);
+	ubi_assert(pnum < ubi->peb_count);
+
+retry:
+	spin_lock(&ubi->wl_lock);
+	e = ubi->lookuptbl[pnum];
+	if (e == ubi->move_from) {
+		/*
+		 * User is putting the physical eraseblock which was selected to
+		 * be moved. It will be scheduled for erasure in the
+		 * wear-leveling worker.
+		 */
+		dbg_wl("PEB %d is being moved, wait", pnum);
+		spin_unlock(&ubi->wl_lock);
+
+		/* Wait for the WL worker by taking the @ubi->move_mutex */
+		mutex_lock(&ubi->move_mutex);
+		mutex_unlock(&ubi->move_mutex);
+		goto retry;
+	} else if (e == ubi->move_to) {
+		/*
+		 * User is putting the physical eraseblock which was selected
+		 * as the target the data is moved to. It may happen if the EBA
+		 * unit already re-mapped the LEB in 'ubi_eba_copy_leb()' but
+		 * the WL unit has not put the PEB to the "used" tree yet, but
+		 * it is about to do this. So we just set a flag which will
+		 * tell the WL worker that the PEB is not needed anymore and
+		 * should be scheduled for erasure.
+		 */
+		dbg_wl("PEB %d is the target of data moving", pnum);
+		ubi_assert(!ubi->move_to_put);
+		ubi->move_to_put = 1;
+		spin_unlock(&ubi->wl_lock);
+		return 0;
+	} else {
+		if (in_wl_tree(e, &ubi->used)) {
+			paranoid_check_in_wl_tree(e, &ubi->used);
+			rb_erase(&e->rb, &ubi->used);
+		} else if (in_wl_tree(e, &ubi->scrub)) {
+			paranoid_check_in_wl_tree(e, &ubi->scrub);
+			rb_erase(&e->rb, &ubi->scrub);
+		} else {
+			err = prot_tree_del(ubi, e->pnum);
+			if (err) {
+				ubi_err("PEB %d not found", pnum);
+				ubi_ro_mode(ubi);
+				spin_unlock(&ubi->wl_lock);
+				return err;
+			}
+		}
+	}
+	spin_unlock(&ubi->wl_lock);
+
+	err = schedule_erase(ubi, e, torture);
+	if (err) {
+		spin_lock(&ubi->wl_lock);
+		wl_tree_add(e, &ubi->used);
+		spin_unlock(&ubi->wl_lock);
+	}
+
+	return err;
+}
+
+/**
+ * ubi_wl_scrub_peb - schedule a physical eraseblock for scrubbing.
+ * @ubi: UBI device description object
+ * @pnum: the physical eraseblock to schedule
+ *
+ * If a bit-flip in a physical eraseblock is detected, this physical eraseblock
+ * needs scrubbing. This function schedules a physical eraseblock for
+ * scrubbing which is done in background. This function returns zero in case of
+ * success and a negative error code in case of failure.
+ */
+int ubi_wl_scrub_peb(struct ubi_device *ubi, int pnum)
+{
+	struct ubi_wl_entry *e;
+
+	ubi_msg("schedule PEB %d for scrubbing", pnum);
+
+retry:
+	spin_lock(&ubi->wl_lock);
+	e = ubi->lookuptbl[pnum];
+	if (e == ubi->move_from || in_wl_tree(e, &ubi->scrub)) {
+		spin_unlock(&ubi->wl_lock);
+		return 0;
+	}
+
+	if (e == ubi->move_to) {
+		/*
+		 * This physical eraseblock was used to move data to. The data
+		 * was moved but the PEB was not yet inserted to the proper
+		 * tree. We should just wait a little and let the WL worker
+		 * proceed.
+		 */
+		spin_unlock(&ubi->wl_lock);
+		dbg_wl("the PEB %d is not in proper tree, retry", pnum);
+		yield();
+		goto retry;
+	}
+
+	if (in_wl_tree(e, &ubi->used)) {
+		paranoid_check_in_wl_tree(e, &ubi->used);
+		rb_erase(&e->rb, &ubi->used);
+	} else {
+		int err;
+
+		err = prot_tree_del(ubi, e->pnum);
+		if (err) {
+			ubi_err("PEB %d not found", pnum);
+			ubi_ro_mode(ubi);
+			spin_unlock(&ubi->wl_lock);
+			return err;
+		}
+	}
+
+	wl_tree_add(e, &ubi->scrub);
+	spin_unlock(&ubi->wl_lock);
+
+	/*
+	 * Technically scrubbing is the same as wear-leveling, so it is done
+	 * by the WL worker.
+	 */
+	return ensure_wear_leveling(ubi);
+}
+
+/**
+ * ubi_wl_flush - flush all pending works.
+ * @ubi: UBI device description object
+ *
+ * This function returns zero in case of success and a negative error code in
+ * case of failure.
+ */
+int ubi_wl_flush(struct ubi_device *ubi)
+{
+	int err;
+
+	/*
+	 * Erase while the pending works queue is not empty, but not more then
+	 * the number of currently pending works.
+	 */
+	dbg_wl("flush (%d pending works)", ubi->works_count);
+	while (ubi->works_count) {
+		err = do_work(ubi);
+		if (err)
+			return err;
+	}
+
+	/*
+	 * Make sure all the works which have been done in parallel are
+	 * finished.
+	 */
+	down_write(&ubi->work_sem);
+	up_write(&ubi->work_sem);
+
+	/*
+	 * And in case last was the WL worker and it cancelled the LEB
+	 * movement, flush again.
+	 */
+	while (ubi->works_count) {
+		dbg_wl("flush more (%d pending works)", ubi->works_count);
+		err = do_work(ubi);
+		if (err)
+			return err;
+	}
+
+	return 0;
+}
+
+/**
+ * tree_destroy - destroy an RB-tree.
+ * @root: the root of the tree to destroy
+ */
+static void tree_destroy(struct rb_root *root)
+{
+	struct rb_node *rb;
+	struct ubi_wl_entry *e;
+
+	rb = root->rb_node;
+	while (rb) {
+		if (rb->rb_left)
+			rb = rb->rb_left;
+		else if (rb->rb_right)
+			rb = rb->rb_right;
+		else {
+			e = rb_entry(rb, struct ubi_wl_entry, rb);
+
+			rb = rb_parent(rb);
+			if (rb) {
+				if (rb->rb_left == &e->rb)
+					rb->rb_left = NULL;
+				else
+					rb->rb_right = NULL;
+			}
+
+			kmem_cache_free(ubi_wl_entry_slab, e);
+		}
+	}
+}
+
+/**
+ * ubi_thread - UBI background thread.
+ * @u: the UBI device description object pointer
+ */
+int ubi_thread(void *u)
+{
+	int failures = 0;
+	struct ubi_device *ubi = u;
+
+	ubi_msg("background thread \"%s\" started, PID %d",
+		ubi->bgt_name, task_pid_nr(current));
+
+	set_freezable();
+	for (;;) {
+		int err;
+
+		if (kthread_should_stop())
+			break;
+
+		if (try_to_freeze())
+			continue;
+
+		spin_lock(&ubi->wl_lock);
+		if (list_empty(&ubi->works) || ubi->ro_mode ||
+			       !ubi->thread_enabled) {
+			set_current_state(TASK_INTERRUPTIBLE);
+			spin_unlock(&ubi->wl_lock);
+			schedule();
+			continue;
+		}
+		spin_unlock(&ubi->wl_lock);
+
+		err = do_work(ubi);
+		if (err) {
+			ubi_err("%s: work failed with error code %d",
+				ubi->bgt_name, err);
+			if (failures++ > WL_MAX_FAILURES) {
+				/*
+				 * Too many failures, disable the thread and
+				 * switch to read-only mode.
+				 */
+				ubi_msg("%s: %d consecutive failures",
+					ubi->bgt_name, WL_MAX_FAILURES);
+				ubi_ro_mode(ubi);
+				break;
+			}
+		} else
+			failures = 0;
+
+		cond_resched();
+	}
+
+	dbg_wl("background thread \"%s\" is killed", ubi->bgt_name);
+	return 0;
+}
+
+/**
+ * cancel_pending - cancel all pending works.
+ * @ubi: UBI device description object
+ */
+static void cancel_pending(struct ubi_device *ubi)
+{
+	while (!list_empty(&ubi->works)) {
+		struct ubi_work *wrk;
+
+		wrk = list_entry(ubi->works.next, struct ubi_work, list);
+		list_del(&wrk->list);
+		wrk->func(ubi, wrk, 1);
+		ubi->works_count -= 1;
+		ubi_assert(ubi->works_count >= 0);
+	}
+}
+
+/**
+ * ubi_wl_init_scan - initialize the wear-leveling unit using scanning
+ * information.
+ * @ubi: UBI device description object
+ * @si: scanning information
+ *
+ * This function returns zero in case of success, and a negative error code in
+ * case of failure.
+ */
+int ubi_wl_init_scan(struct ubi_device *ubi, struct ubi_scan_info *si)
+{
+	int err;
+	struct rb_node *rb1, *rb2;
+	struct ubi_scan_volume *sv;
+	struct ubi_scan_leb *seb, *tmp;
+	struct ubi_wl_entry *e;
+
+
+	ubi->used = ubi->free = ubi->scrub = RB_ROOT;
+	ubi->prot.pnum = ubi->prot.aec = RB_ROOT;
+	spin_lock_init(&ubi->wl_lock);
+	mutex_init(&ubi->move_mutex);
+	init_rwsem(&ubi->work_sem);
+	ubi->max_ec = si->max_ec;
+	INIT_LIST_HEAD(&ubi->works);
+
+	sprintf(ubi->bgt_name, UBI_BGT_NAME_PATTERN, ubi->ubi_num);
+
+	err = -ENOMEM;
+	ubi->lookuptbl = kzalloc(ubi->peb_count * sizeof(void *), GFP_KERNEL);
+	if (!ubi->lookuptbl)
+		return err;
+
+	list_for_each_entry_safe(seb, tmp, &si->erase, u.list) {
+		cond_resched();
+
+		e = kmem_cache_alloc(ubi_wl_entry_slab, GFP_KERNEL);
+		if (!e)
+			goto out_free;
+
+		e->pnum = seb->pnum;
+		e->ec = seb->ec;
+		ubi->lookuptbl[e->pnum] = e;
+		if (schedule_erase(ubi, e, 0)) {
+			kmem_cache_free(ubi_wl_entry_slab, e);
+			goto out_free;
+		}
+	}
+
+	list_for_each_entry(seb, &si->free, u.list) {
+		cond_resched();
+
+		e = kmem_cache_alloc(ubi_wl_entry_slab, GFP_KERNEL);
+		if (!e)
+			goto out_free;
+
+		e->pnum = seb->pnum;
+		e->ec = seb->ec;
+		ubi_assert(e->ec >= 0);
+		wl_tree_add(e, &ubi->free);
+		ubi->lookuptbl[e->pnum] = e;
+	}
+
+	list_for_each_entry(seb, &si->corr, u.list) {
+		cond_resched();
+
+		e = kmem_cache_alloc(ubi_wl_entry_slab, GFP_KERNEL);
+		if (!e)
+			goto out_free;
+
+		e->pnum = seb->pnum;
+		e->ec = seb->ec;
+		ubi->lookuptbl[e->pnum] = e;
+		if (schedule_erase(ubi, e, 0)) {
+			kmem_cache_free(ubi_wl_entry_slab, e);
+			goto out_free;
+		}
+	}
+
+	ubi_rb_for_each_entry(rb1, sv, &si->volumes, rb) {
+		ubi_rb_for_each_entry(rb2, seb, &sv->root, u.rb) {
+			cond_resched();
+
+			e = kmem_cache_alloc(ubi_wl_entry_slab, GFP_KERNEL);
+			if (!e)
+				goto out_free;
+
+			e->pnum = seb->pnum;
+			e->ec = seb->ec;
+			ubi->lookuptbl[e->pnum] = e;
+			if (!seb->scrub) {
+				dbg_wl("add PEB %d EC %d to the used tree",
+				       e->pnum, e->ec);
+				wl_tree_add(e, &ubi->used);
+			} else {
+				dbg_wl("add PEB %d EC %d to the scrub tree",
+				       e->pnum, e->ec);
+				wl_tree_add(e, &ubi->scrub);
+			}
+		}
+	}
+
+	if (ubi->avail_pebs < WL_RESERVED_PEBS) {
+		ubi_err("no enough physical eraseblocks (%d, need %d)",
+			ubi->avail_pebs, WL_RESERVED_PEBS);
+		goto out_free;
+	}
+	ubi->avail_pebs -= WL_RESERVED_PEBS;
+	ubi->rsvd_pebs += WL_RESERVED_PEBS;
+
+	/* Schedule wear-leveling if needed */
+	err = ensure_wear_leveling(ubi);
+	if (err)
+		goto out_free;
+
+	return 0;
+
+out_free:
+	cancel_pending(ubi);
+	tree_destroy(&ubi->used);
+	tree_destroy(&ubi->free);
+	tree_destroy(&ubi->scrub);
+	kfree(ubi->lookuptbl);
+	return err;
+}
+
+/**
+ * protection_trees_destroy - destroy the protection RB-trees.
+ * @ubi: UBI device description object
+ */
+static void protection_trees_destroy(struct ubi_device *ubi)
+{
+	struct rb_node *rb;
+	struct ubi_wl_prot_entry *pe;
+
+	rb = ubi->prot.aec.rb_node;
+	while (rb) {
+		if (rb->rb_left)
+			rb = rb->rb_left;
+		else if (rb->rb_right)
+			rb = rb->rb_right;
+		else {
+			pe = rb_entry(rb, struct ubi_wl_prot_entry, rb_aec);
+
+			rb = rb_parent(rb);
+			if (rb) {
+				if (rb->rb_left == &pe->rb_aec)
+					rb->rb_left = NULL;
+				else
+					rb->rb_right = NULL;
+			}
+
+			kmem_cache_free(ubi_wl_entry_slab, pe->e);
+			kfree(pe);
+		}
+	}
+}
+
+/**
+ * ubi_wl_close - close the wear-leveling unit.
+ * @ubi: UBI device description object
+ */
+void ubi_wl_close(struct ubi_device *ubi)
+{
+	dbg_wl("close the UBI wear-leveling unit");
+
+	cancel_pending(ubi);
+	protection_trees_destroy(ubi);
+	tree_destroy(&ubi->used);
+	tree_destroy(&ubi->free);
+	tree_destroy(&ubi->scrub);
+	kfree(ubi->lookuptbl);
+}
+
+#ifdef CONFIG_MTD_UBI_DEBUG_PARANOID
+
+/**
+ * paranoid_check_ec - make sure that the erase counter of a physical eraseblock
+ * is correct.
+ * @ubi: UBI device description object
+ * @pnum: the physical eraseblock number to check
+ * @ec: the erase counter to check
+ *
+ * This function returns zero if the erase counter of physical eraseblock @pnum
+ * is equivalent to @ec, %1 if not, and a negative error code if an error
+ * occurred.
+ */
+static int paranoid_check_ec(struct ubi_device *ubi, int pnum, int ec)
+{
+	int err;
+	long long read_ec;
+	struct ubi_ec_hdr *ec_hdr;
+
+	ec_hdr = kzalloc(ubi->ec_hdr_alsize, GFP_NOFS);
+	if (!ec_hdr)
+		return -ENOMEM;
+
+	err = ubi_io_read_ec_hdr(ubi, pnum, ec_hdr, 0);
+	if (err && err != UBI_IO_BITFLIPS) {
+		/* The header does not have to exist */
+		err = 0;
+		goto out_free;
+	}
+
+	read_ec = be64_to_cpu(ec_hdr->ec);
+	if (ec != read_ec) {
+		ubi_err("paranoid check failed for PEB %d", pnum);
+		ubi_err("read EC is %lld, should be %d", read_ec, ec);
+		ubi_dbg_dump_stack();
+		err = 1;
+	} else
+		err = 0;
+
+out_free:
+	kfree(ec_hdr);
+	return err;
+}
+
+/**
+ * paranoid_check_in_wl_tree - make sure that a wear-leveling entry is present
+ * in a WL RB-tree.
+ * @e: the wear-leveling entry to check
+ * @root: the root of the tree
+ *
+ * This function returns zero if @e is in the @root RB-tree and %1 if it
+ * is not.
+ */
+static int paranoid_check_in_wl_tree(struct ubi_wl_entry *e,
+				     struct rb_root *root)
+{
+	if (in_wl_tree(e, root))
+		return 0;
+
+	ubi_err("paranoid check failed for PEB %d, EC %d, RB-tree %p ",
+		e->pnum, e->ec, root);
+	ubi_dbg_dump_stack();
+	return 1;
+}
+
+#endif /* CONFIG_MTD_UBI_DEBUG_PARANOID */
diff --git a/cpu/ppc4xx/4xx_enet.c b/drivers/net/4xx_enet.c
index 8a3833513..197826959 100644
--- a/cpu/ppc4xx/4xx_enet.c
+++ b/drivers/net/4xx_enet.c
@@ -91,13 +91,6 @@
 #include <miiphy.h>
 #include <malloc.h>
 
-/*
- * Only compile for platform with AMCC EMAC ethernet controller and
- * network support enabled.
- * Remark: CONFIG_405 describes Xilinx PPC405 FPGA without EMAC controller!
- */
-#if defined(CONFIG_CMD_NET) && !defined(CONFIG_405) && !defined(CONFIG_IOP480)
-
 #if !(defined(CONFIG_MII) || defined(CONFIG_CMD_MII))
 #error "CONFIG_MII has to be defined!"
 #endif
@@ -198,6 +191,7 @@
 #define BI_PHYMODE_RMII  8
 #endif
 #endif
+#define BI_PHYMODE_SGMII 9
 
 #if defined(CONFIG_440SP) || defined(CONFIG_440SPE) || \
     defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
@@ -216,6 +210,52 @@
 #define MAL_RX_CHAN_MUL	1
 #endif
 
+/*--------------------------------------------------------------------+
+ * Fixed PHY (PHY-less) support for Ethernet Ports.
+ *--------------------------------------------------------------------*/
+
+/*
+ * Some boards do not have a PHY for each ethernet port. These ports
+ * are known as Fixed PHY (or PHY-less) ports. For such ports, set
+ * the appropriate CONFIG_PHY_ADDR equal to CONFIG_FIXED_PHY and
+ * then define CONFIG_SYS_FIXED_PHY_PORTS to define what the speed and
+ * duplex should be for these ports in the board configuration
+ * file.
+ *
+ * For Example:
+ *     #define CONFIG_FIXED_PHY   0xFFFFFFFF
+ *
+ *     #define CONFIG_PHY_ADDR    CONFIG_FIXED_PHY
+ *     #define CONFIG_PHY1_ADDR   1
+ *     #define CONFIG_PHY2_ADDR   CONFIG_FIXED_PHY
+ *     #define CONFIG_PHY3_ADDR   3
+ *
+ *     #define CONFIG_SYS_FIXED_PHY_PORT(devnum,speed,duplex) \
+ *                     {devnum, speed, duplex},
+ *
+ *     #define CONFIG_SYS_FIXED_PHY_PORTS \
+ *                     CONFIG_SYS_FIXED_PHY_PORT(0,1000,FULL) \
+ *                     CONFIG_SYS_FIXED_PHY_PORT(2,100,HALF)
+ */
+
+#ifndef CONFIG_FIXED_PHY
+#define CONFIG_FIXED_PHY	0xFFFFFFFF /* Fixed PHY (PHY-less) */
+#endif
+
+#ifndef CONFIG_SYS_FIXED_PHY_PORTS
+#define CONFIG_SYS_FIXED_PHY_PORTS	/* default is an empty array */
+#endif
+
+struct fixed_phy_port {
+	unsigned int devnum;	/* ethernet port */
+	unsigned int speed;	/* specified speed 10,100 or 1000 */
+	unsigned int duplex;	/* specified duplex FULL or HALF */
+};
+
+static const struct fixed_phy_port fixed_phy_port[] = {
+	CONFIG_SYS_FIXED_PHY_PORTS	/* defined in board configuration file */
+};
+
 /*-----------------------------------------------------------------------------+
  * Global variables. TX and RX descriptors and buffers.
  *-----------------------------------------------------------------------------*/
@@ -611,8 +651,17 @@ int ppc_4xx_eth_setup_bridge(int devnum, bd_t * bis)
 
 #if defined(CONFIG_460EX)
 	mode = 9;
+	mfsdr(SDR0_ETH_CFG, eth_cfg);
+	if (((eth_cfg & SDR0_ETH_CFG_SGMII0_ENABLE) > 0) &&
+	    ((eth_cfg & SDR0_ETH_CFG_SGMII1_ENABLE) > 0))
+		mode = 11; /* config SGMII */
 #else
 	mode = 10;
+	mfsdr(SDR0_ETH_CFG, eth_cfg);
+	if (((eth_cfg & SDR0_ETH_CFG_SGMII0_ENABLE) > 0) &&
+	    ((eth_cfg & SDR0_ETH_CFG_SGMII1_ENABLE) > 0) &&
+	    ((eth_cfg & SDR0_ETH_CFG_SGMII2_ENABLE) > 0))
+		mode = 12; /* config SGMII */
 #endif
 
 	/* TODO:
@@ -635,6 +684,8 @@ int ppc_4xx_eth_setup_bridge(int devnum, bd_t * bis)
 	/*
 	 * Right now only 2*RGMII is supported. Please extend when needed.
 	 * sr - 2008-02-19
+	 * Add SGMII support.
+	 * vg - 2008-07-28
 	 */
 	switch (mode) {
 	case 1:
@@ -761,6 +812,20 @@ int ppc_4xx_eth_setup_bridge(int devnum, bd_t * bis)
 		bis->bi_phymode[2] = BI_PHYMODE_RGMII;
 		bis->bi_phymode[3] = BI_PHYMODE_RGMII;
 		break;
+	case 11:
+		/* 2 SGMII - 460EX */
+		bis->bi_phymode[0] = BI_PHYMODE_SGMII;
+		bis->bi_phymode[1] = BI_PHYMODE_SGMII;
+		bis->bi_phymode[2] = BI_PHYMODE_NONE;
+		bis->bi_phymode[3] = BI_PHYMODE_NONE;
+		break;
+	case 12:
+		/* 3 SGMII - 460GT */
+		bis->bi_phymode[0] = BI_PHYMODE_SGMII;
+		bis->bi_phymode[1] = BI_PHYMODE_SGMII;
+		bis->bi_phymode[2] = BI_PHYMODE_SGMII;
+		bis->bi_phymode[3] = BI_PHYMODE_NONE;
+		break;
 	default:
 		break;
 	}
@@ -945,9 +1010,50 @@ static int ppc_4xx_eth_init (struct eth_device *dev, bd_t * bis)
 	out_be32((void *)EMAC_M1 + hw_p->hw_addr, mode_reg);
 #endif /* defined(CONFIG_440GX) || defined(CONFIG_440SP) */
 
+#if defined(CONFIG_GPCS_PHY_ADDR) || defined(CONFIG_GPCS_PHY1_ADDR) || \
+    defined(CONFIG_GPCS_PHY2_ADDR) || defined(CONFIG_GPCS_PHY3_ADDR)
+	if (bis->bi_phymode[devnum] == BI_PHYMODE_SGMII) {
+		/*
+		 * In SGMII mode, GPCS access is needed for
+		 * communication with the internal SGMII SerDes.
+		 */
+		switch (devnum) {
+#if defined(CONFIG_GPCS_PHY_ADDR)
+		case 0:
+			reg = CONFIG_GPCS_PHY_ADDR;
+			break;
+#endif
+#if defined(CONFIG_GPCS_PHY1_ADDR)
+		case 1:
+			reg = CONFIG_GPCS_PHY1_ADDR;
+			break;
+#endif
+#if defined(CONFIG_GPCS_PHY2_ADDR)
+		case 2:
+			reg = CONFIG_GPCS_PHY2_ADDR;
+			break;
+#endif
+#if defined(CONFIG_GPCS_PHY3_ADDR)
+		case 3:
+			reg = CONFIG_GPCS_PHY3_ADDR;
+			break;
+#endif
+		}
+
+		mode_reg = in_be32((void *)EMAC_M1 + hw_p->hw_addr);
+		mode_reg |= EMAC_M1_MF_1000GPCS | EMAC_M1_IPPA_SET(reg);
+		out_be32((void *)EMAC_M1 + hw_p->hw_addr, mode_reg);
+
+		/* Configure GPCS interface to recommended setting for SGMII */
+		miiphy_reset(dev->name, reg);
+		miiphy_write(dev->name, reg, 0x04, 0x8120); /* AsymPause, FDX */
+		miiphy_write(dev->name, reg, 0x07, 0x2801); /* msg_pg, toggle */
+		miiphy_write(dev->name, reg, 0x00, 0x0140); /* 1Gbps, FDX     */
+	}
+#endif /* defined(CONFIG_GPCS_PHY_ADDR) */
+
 	/* wait for PHY to complete auto negotiation */
 	reg_short = 0;
-#ifndef CONFIG_CS8952_PHY
 	switch (devnum) {
 	case 0:
 		reg = CONFIG_PHY_ADDR;
@@ -974,6 +1080,9 @@ static int ppc_4xx_eth_init (struct eth_device *dev, bd_t * bis)
 
 	bis->bi_phynum[devnum] = reg;
 
+	if (reg == CONFIG_FIXED_PHY)
+		goto get_speed;
+
 #if defined(CONFIG_PHY_RESET)
 	/*
 	 * Reset the phy, only if its the first time through
@@ -986,6 +1095,27 @@ static int ppc_4xx_eth_init (struct eth_device *dev, bd_t * bis)
 		miiphy_write (dev->name, reg, 0x09, 0x0e00);
 		miiphy_write (dev->name, reg, 0x04, 0x01e1);
 #endif
+#if defined(CONFIG_M88E1112_PHY)
+		if (bis->bi_phymode[devnum] == BI_PHYMODE_SGMII) {
+			/*
+			 * Marvell 88E1112 PHY needs to have the SGMII MAC
+			 * interace (page 2) properly configured to
+			 * communicate with the 460EX/GT GPCS interface.
+			 */
+
+			/* Set access to Page 2 */
+			miiphy_write(dev->name, reg, 0x16, 0x0002);
+
+			miiphy_write(dev->name, reg, 0x00, 0x0040); /* 1Gbps */
+			miiphy_read(dev->name, reg, 0x1a, &reg_short);
+			reg_short |= 0x8000; /* bypass Auto-Negotiation */
+			miiphy_write(dev->name, reg, 0x1a, reg_short);
+			miiphy_reset(dev->name, reg); /* reset MAC interface */
+
+			/* Reset access to Page 0 */
+			miiphy_write(dev->name, reg, 0x16, 0x0000);
+		}
+#endif /* defined(CONFIG_M88E1112_PHY) */
 		miiphy_reset (dev->name, reg);
 
 #if defined(CONFIG_440GX) || \
@@ -1022,7 +1152,7 @@ static int ppc_4xx_eth_init (struct eth_device *dev, bd_t * bis)
 			miiphy_write (dev->name, reg, 0x1f, 0x0000);
 			/* end Vitesse/Cicada errata */
 		}
-#endif
+#endif /* defined(CONFIG_CIS8201_PHY) */
 
 #if defined(CONFIG_ET1011C_PHY)
 		/*
@@ -1041,9 +1171,9 @@ static int ppc_4xx_eth_init (struct eth_device *dev, bd_t * bis)
 
 			miiphy_write(dev->name, reg, 0x1c, 0x74f0);
 		}
-#endif
+#endif /* defined(CONFIG_ET1011C_PHY) */
 
-#endif
+#endif /* defined(CONFIG_440GX) ... */
 		/* Start/Restart autonegotiation */
 		phy_setup_aneg (dev->name, reg);
 		udelay (1000);
@@ -1073,15 +1203,30 @@ static int ppc_4xx_eth_init (struct eth_device *dev, bd_t * bis)
 			}
 			udelay (1000);	/* 1 ms */
 			miiphy_read (dev->name, reg, PHY_BMSR, &reg_short);
-
 		}
 		puts (" done\n");
 		udelay (500000);	/* another 500 ms (results in faster booting) */
 	}
-#endif /* #ifndef CONFIG_CS8952_PHY */
 
-	speed = miiphy_speed (dev->name, reg);
-	duplex = miiphy_duplex (dev->name, reg);
+get_speed:
+	if (reg == CONFIG_FIXED_PHY) {
+		for (i = 0; i < ARRAY_SIZE(fixed_phy_port); i++) {
+			if (devnum == fixed_phy_port[i].devnum) {
+				speed = fixed_phy_port[i].speed;
+				duplex = fixed_phy_port[i].duplex;
+				break;
+			}
+		}
+
+		if (i == ARRAY_SIZE(fixed_phy_port)) {
+			printf("ERROR: PHY (%s) not configured correctly!\n",
+				dev->name);
+			return -1;
+		}
+	} else {
+		speed = miiphy_speed(dev->name, reg);
+		duplex = miiphy_duplex(dev->name, reg);
+	}
 
 	if (hw_p->print_speed) {
 		hw_p->print_speed = 0;
@@ -1185,8 +1330,8 @@ static int ppc_4xx_eth_init (struct eth_device *dev, bd_t * bis)
 #ifdef CONFIG_4xx_DCACHE
 		flush_dcache_range(bd_cached, bd_cached + MAL_ALLOC_SIZE);
 		if (!last_used_ea)
-#if defined(CFG_MEM_TOP_HIDE)
-			bd_uncached = bis->bi_memsize + CFG_MEM_TOP_HIDE;
+#if defined(CONFIG_SYS_MEM_TOP_HIDE)
+			bd_uncached = bis->bi_memsize + CONFIG_SYS_MEM_TOP_HIDE;
 #else
 			bd_uncached = bis->bi_memsize;
 #endif
@@ -1979,5 +2124,3 @@ int emac4xx_miiphy_initialize (bd_t * bis)
 	return 0;
 }
 #endif /* !defined(CONFIG_NET_MULTI) */
-
-#endif
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index a084000a9..631336ab4 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -26,6 +26,7 @@ include $(TOPDIR)/config.mk
 LIB	:= $(obj)libnet.a
 
 COBJS-$(CONFIG_DRIVER_3C589) += 3c589.o
+COBJS-$(CONFIG_DRIVER_AX88180) += ax88180.o
 COBJS-$(CONFIG_BCM570x) += bcm570x.o bcm570x_autoneg.o 5701rls.o
 COBJS-$(CONFIG_BFIN_MAC) += bfin_mac.o
 COBJS-$(CONFIG_DRIVER_CS8900) += cs8900.o
@@ -34,20 +35,18 @@ COBJS-$(CONFIG_DRIVER_DM9000) += dm9000x.o
 COBJS-$(CONFIG_E1000) += e1000.o
 COBJS-$(CONFIG_EEPRO100) += eepro100.o
 COBJS-$(CONFIG_ENC28J60) += enc28j60.o
-COBJS-$(CONFIG_FSLDMAFEC) += fsl_mcdmafec.o
+COBJS-$(CONFIG_FSLDMAFEC) += fsl_mcdmafec.o mcfmii.o
 COBJS-$(CONFIG_GRETH) += greth.o
 COBJS-$(CONFIG_INCA_IP_SWITCH) += inca-ip_sw.o
 COBJS-$(CONFIG_DRIVER_KS8695ETH) += ks8695eth.o
 COBJS-$(CONFIG_DRIVER_LAN91C96) += lan91c96.o
 COBJS-$(CONFIG_MACB) += macb.o
-COBJS-$(CONFIG_MCFFEC) += mcffec.o
+COBJS-$(CONFIG_MCFFEC) += mcffec.o mcfmii.o
 COBJS-$(CONFIG_MPC5xxx_FEC) += mpc5xxx_fec.o
 COBJS-$(CONFIG_MPC512x_FEC) += mpc512x_fec.o
 COBJS-$(CONFIG_NATSEMI) += natsemi.o
-ifeq ($(CONFIG_DRIVER_NE2000),y)
-COBJS-y += ne2000.o
-COBJS-$(CONFIG_DRIVER_AX88796L) += ax88796.o
-endif
+COBJS-$(CONFIG_DRIVER_NE2000) += ne2000.o ne2000_base.o
+COBJS-$(CONFIG_DRIVER_AX88796L) += ax88796.o ne2000_base.o
 COBJS-$(CONFIG_DRIVER_NETARMETH) += netarm_eth.o
 COBJS-$(CONFIG_NETCONSOLE) += netconsole.o
 COBJS-$(CONFIG_DRIVER_NS7520_ETHERNET) += ns7520_eth.o
@@ -55,6 +54,7 @@ COBJS-$(CONFIG_NS8382X) += ns8382x.o
 COBJS-$(CONFIG_DRIVER_NS9750_ETHERNET) += ns9750_eth.o
 COBJS-$(CONFIG_PCNET) += pcnet.o
 COBJS-$(CONFIG_PLB2800_ETHER) += plb2800_eth.o
+COBJS-$(CONFIG_PPC4xx_EMAC) += 4xx_enet.o
 COBJS-$(CONFIG_DRIVER_RTL8019) += rtl8019.o
 COBJS-$(CONFIG_RTL8139) += rtl8139.o
 COBJS-$(CONFIG_RTL8169) += rtl8169.o
diff --git a/drivers/net/ax88180.c b/drivers/net/ax88180.c
new file mode 100644
index 000000000..d843397f3
--- /dev/null
+++ b/drivers/net/ax88180.c
@@ -0,0 +1,727 @@
+/*
+ * ax88180: ASIX AX88180 Non-PCI Gigabit Ethernet u-boot driver
+ *
+ * This program is free software; you can distribute it and/or modify
+ * it under the terms of the GNU General Public License (Version 2) as
+ * published by the Free Software Foundation.
+ * This program is distributed in the hope it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+ * See the GNU General Public License for more details.
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston MA 02111-1307,
+ * USA.
+ */
+
+/*
+ * ========================================================================
+ * ASIX AX88180 Non-PCI 16/32-bit Gigabit Ethernet Linux Driver
+ *
+ * The AX88180 Ethernet controller is a high performance and highly
+ * integrated local CPU bus Ethernet controller with embedded 40K bytes
+ * SRAM and supports both 16-bit and 32-bit SRAM-Like interfaces for any
+ * embedded systems.
+ * The AX88180 is a single chip 10/100/1000Mbps Gigabit Ethernet
+ * controller that supports both MII and RGMII interfaces and is
+ * compliant to IEEE 802.3, IEEE 802.3u and IEEE 802.3z standards.
+ *
+ * Please visit ASIX's web site (http://www.asix.com.tw) for more
+ * details.
+ *
+ * Module Name	: ax88180.c
+ * Date		: 2008-07-07
+ * History
+ * 09/06/2006	: New release for AX88180 US2 chip.
+ * 07/07/2008	: Fix up the coding style and using inline functions
+ *		  instead of macros
+ * ========================================================================
+ */
+#include <common.h>
+#include <command.h>
+#include <net.h>
+#include <malloc.h>
+#include "ax88180.h"
+
+/*
+ * ===========================================================================
+ * Local SubProgram Declaration
+ * ===========================================================================
+ */
+static void ax88180_rx_handler (struct eth_device *dev);
+static int ax88180_phy_initial (struct eth_device *dev);
+static void ax88180_meidia_config (struct eth_device *dev);
+static unsigned long get_CicadaPHY_meida_mode (struct eth_device *dev);
+static unsigned long get_MarvellPHY_meida_mode (struct eth_device *dev);
+static unsigned short ax88180_mdio_read (struct eth_device *dev,
+					 unsigned long regaddr);
+static void ax88180_mdio_write (struct eth_device *dev,
+				unsigned long regaddr, unsigned short regdata);
+
+/*
+ * ===========================================================================
+ * Local SubProgram Bodies
+ * ===========================================================================
+ */
+static int ax88180_mdio_check_complete (struct eth_device *dev)
+{
+	int us_cnt = 10000;
+	unsigned short tmpval;
+
+	/* MDIO read/write should not take more than 10 ms */
+	while (--us_cnt) {
+		tmpval = INW (dev, MDIOCTRL);
+		if (((tmpval & READ_PHY) == 0) && ((tmpval & WRITE_PHY) == 0))
+			break;
+	}
+
+	return us_cnt;
+}
+
+static unsigned short
+ax88180_mdio_read (struct eth_device *dev, unsigned long regaddr)
+{
+	struct ax88180_private *priv = (struct ax88180_private *)dev->priv;
+	unsigned long tmpval = 0;
+
+	OUTW (dev, (READ_PHY | (regaddr << 8) | priv->PhyAddr), MDIOCTRL);
+
+	if (ax88180_mdio_check_complete (dev))
+		tmpval = INW (dev, MDIODP);
+	else
+		printf ("Failed to read PHY register!\n");
+
+	return (unsigned short)(tmpval & 0xFFFF);
+}
+
+static void
+ax88180_mdio_write (struct eth_device *dev, unsigned long regaddr,
+		    unsigned short regdata)
+{
+	struct ax88180_private *priv = (struct ax88180_private *)dev->priv;
+
+	OUTW (dev, regdata, MDIODP);
+
+	OUTW (dev, (WRITE_PHY | (regaddr << 8) | priv->PhyAddr), MDIOCTRL);
+
+	if (!ax88180_mdio_check_complete (dev))
+		printf ("Failed to write PHY register!\n");
+}
+
+static int ax88180_phy_reset (struct eth_device *dev)
+{
+	unsigned short delay_cnt = 500;
+
+	ax88180_mdio_write (dev, BMCR, (PHY_RESET | AUTONEG_EN));
+
+	/* Wait for the reset to complete, or time out (500 ms) */
+	while (ax88180_mdio_read (dev, BMCR) & PHY_RESET) {
+		udelay (1000);
+		if (--delay_cnt == 0) {
+			printf ("Failed to reset PHY!\n");
+			return -1;
+		}
+	}
+
+	return 0;
+}
+
+static void ax88180_mac_reset (struct eth_device *dev)
+{
+	unsigned long tmpval;
+	unsigned char i;
+
+	struct {
+		unsigned short offset, value;
+	} program_seq[] = {
+		{
+		MISC, MISC_NORMAL}, {
+		RXINDICATOR, DEFAULT_RXINDICATOR}, {
+		TXCMD, DEFAULT_TXCMD}, {
+		TXBS, DEFAULT_TXBS}, {
+		TXDES0, DEFAULT_TXDES0}, {
+		TXDES1, DEFAULT_TXDES1}, {
+		TXDES2, DEFAULT_TXDES2}, {
+		TXDES3, DEFAULT_TXDES3}, {
+		TXCFG, DEFAULT_TXCFG}, {
+		MACCFG2, DEFAULT_MACCFG2}, {
+		MACCFG3, DEFAULT_MACCFG3}, {
+		TXLEN, DEFAULT_TXLEN}, {
+		RXBTHD0, DEFAULT_RXBTHD0}, {
+		RXBTHD1, DEFAULT_RXBTHD1}, {
+		RXFULTHD, DEFAULT_RXFULTHD}, {
+		DOGTHD0, DEFAULT_DOGTHD0}, {
+	DOGTHD1, DEFAULT_DOGTHD1},};
+
+	OUTW (dev, MISC_RESET_MAC, MISC);
+	tmpval = INW (dev, MISC);
+
+	for (i = 0; i < (sizeof (program_seq) / sizeof (program_seq[0])); i++)
+		OUTW (dev, program_seq[i].value, program_seq[i].offset);
+}
+
+static int ax88180_poll_tx_complete (struct eth_device *dev)
+{
+	struct ax88180_private *priv = (struct ax88180_private *)dev->priv;
+	unsigned long tmpval, txbs_txdp;
+	int TimeOutCnt = 10000;
+
+	txbs_txdp = 1 << priv->NextTxDesc;
+
+	while (TimeOutCnt--) {
+
+		tmpval = INW (dev, TXBS);
+
+		if ((tmpval & txbs_txdp) == 0)
+			break;
+
+		udelay (100);
+	}
+
+	if (TimeOutCnt)
+		return 0;
+	else
+		return -TimeOutCnt;
+}
+
+static void ax88180_rx_handler (struct eth_device *dev)
+{
+	struct ax88180_private *priv = (struct ax88180_private *)dev->priv;
+	unsigned long data_size;
+	unsigned short rxcurt_ptr, rxbound_ptr, next_ptr;
+	int i;
+#if defined (CONFIG_DRIVER_AX88180_16BIT)
+	unsigned short *rxdata = (unsigned short *)NetRxPackets[0];
+#else
+	unsigned long *rxdata = (unsigned long *)NetRxPackets[0];
+#endif
+	unsigned short count;
+
+	rxcurt_ptr = INW (dev, RXCURT);
+	rxbound_ptr = INW (dev, RXBOUND);
+	next_ptr = (rxbound_ptr + 1) & RX_PAGE_NUM_MASK;
+
+	debug ("ax88180: RX original RXBOUND=0x%04x,"
+	       " RXCURT=0x%04x\n", rxbound_ptr, rxcurt_ptr);
+
+	while (next_ptr != rxcurt_ptr) {
+
+		OUTW (dev, RX_START_READ, RXINDICATOR);
+
+		data_size = READ_RXBUF (dev) & 0xFFFF;
+
+		if ((data_size == 0) || (data_size > MAX_RX_SIZE)) {
+
+			OUTW (dev, RX_STOP_READ, RXINDICATOR);
+
+			ax88180_mac_reset (dev);
+			printf ("ax88180: Invalid Rx packet length!"
+				" (len=0x%04lx)\n", data_size);
+
+			debug ("ax88180: RX RXBOUND=0x%04x,"
+			       "RXCURT=0x%04x\n", rxbound_ptr, rxcurt_ptr);
+			return;
+		}
+
+		rxbound_ptr += (((data_size + 0xF) & 0xFFF0) >> 4) + 1;
+		rxbound_ptr &= RX_PAGE_NUM_MASK;
+
+		/* Comput access times */
+		count = (data_size + priv->PadSize) >> priv->BusWidth;
+
+		for (i = 0; i < count; i++) {
+			*(rxdata + i) = READ_RXBUF (dev);
+		}
+
+		OUTW (dev, RX_STOP_READ, RXINDICATOR);
+
+		/* Pass the packet up to the protocol layers. */
+		NetReceive (NetRxPackets[0], data_size);
+
+		OUTW (dev, rxbound_ptr, RXBOUND);
+
+		rxcurt_ptr = INW (dev, RXCURT);
+		rxbound_ptr = INW (dev, RXBOUND);
+		next_ptr = (rxbound_ptr + 1) & RX_PAGE_NUM_MASK;
+
+		debug ("ax88180: RX updated RXBOUND=0x%04x,"
+		       "RXCURT=0x%04x\n", rxbound_ptr, rxcurt_ptr);
+	}
+
+	return;
+}
+
+static int ax88180_phy_initial (struct eth_device *dev)
+{
+	struct ax88180_private *priv = (struct ax88180_private *)dev->priv;
+	unsigned long tmp_regval;
+
+	/* Check avaliable PHY chipset  */
+	priv->PhyAddr = MARVELL_88E1111_PHYADDR;
+	priv->PhyID0 = ax88180_mdio_read (dev, PHYIDR0);
+
+	if (priv->PhyID0 == MARVELL_88E1111_PHYIDR0) {
+
+		debug ("ax88180: Found Marvell 88E1111 PHY."
+		       " (PHY Addr=0x%x)\n", priv->PhyAddr);
+
+		tmp_regval = ax88180_mdio_read (dev, M88_EXT_SSR);
+		if ((tmp_regval & HWCFG_MODE_MASK) == RGMII_COPPER_MODE) {
+
+			ax88180_mdio_write (dev, M88_EXT_SCR, DEFAULT_EXT_SCR);
+			if (ax88180_phy_reset (dev) < 0)
+				return 0;
+			ax88180_mdio_write (dev, M88_IER, LINK_CHANGE_INT);
+		}
+	} else {
+
+		priv->PhyAddr = CICADA_CIS8201_PHYADDR;
+		priv->PhyID0 = ax88180_mdio_read (dev, PHYIDR0);
+
+		if (priv->PhyID0 == CICADA_CIS8201_PHYIDR0) {
+
+			debug ("ax88180: Found CICADA CIS8201 PHY"
+			       " chipset. (PHY Addr=0x%x)\n", priv->PhyAddr);
+			ax88180_mdio_write (dev, CIS_IMR,
+					    (CIS_INT_ENABLE | LINK_CHANGE_INT));
+
+			/* Set CIS_SMI_PRIORITY bit before force the media mode */
+			tmp_regval =
+			    ax88180_mdio_read (dev, CIS_AUX_CTRL_STATUS);
+			tmp_regval &= ~CIS_SMI_PRIORITY;
+			ax88180_mdio_write (dev, CIS_AUX_CTRL_STATUS,
+					    tmp_regval);
+		} else {
+			printf ("ax88180: Unknown PHY chipset!!\n");
+			return 0;
+		}
+	}
+
+	return 1;
+}
+
+static void ax88180_meidia_config (struct eth_device *dev)
+{
+	struct ax88180_private *priv = (struct ax88180_private *)dev->priv;
+	unsigned long bmcr_val, bmsr_val;
+	unsigned long rxcfg_val, maccfg0_val, maccfg1_val;
+	unsigned long RealMediaMode;
+	int i;
+
+	/* Waiting 2 seconds for PHY link stable */
+	for (i = 0; i < 20000; i++) {
+		bmsr_val = ax88180_mdio_read (dev, BMSR);
+		if (bmsr_val & LINKOK) {
+			break;
+		}
+		udelay (100);
+	}
+
+	bmsr_val = ax88180_mdio_read (dev, BMSR);
+	debug ("ax88180: BMSR=0x%04x\n", (unsigned int)bmsr_val);
+
+	if (bmsr_val & LINKOK) {
+		bmcr_val = ax88180_mdio_read (dev, BMCR);
+
+		if (bmcr_val & AUTONEG_EN) {
+
+			/*
+			 * Waiting for Auto-negotiation completion, this may
+			 * take up to 5 seconds.
+			 */
+			debug ("ax88180: Auto-negotiation is "
+			       "enabled. Waiting for NWay completion..\n");
+			for (i = 0; i < 50000; i++) {
+				bmsr_val = ax88180_mdio_read (dev, BMSR);
+				if (bmsr_val & AUTONEG_COMPLETE) {
+					break;
+				}
+				udelay (100);
+			}
+		} else
+			debug ("ax88180: Auto-negotiation is disabled.\n");
+
+		debug ("ax88180: BMCR=0x%04x, BMSR=0x%04x\n",
+		       (unsigned int)bmcr_val, (unsigned int)bmsr_val);
+
+		/* Get real media mode here */
+		if (priv->PhyID0 == MARVELL_88E1111_PHYIDR0) {
+			RealMediaMode = get_MarvellPHY_meida_mode (dev);
+		} else if (priv->PhyID0 == CICADA_CIS8201_PHYIDR0) {
+			RealMediaMode = get_CicadaPHY_meida_mode (dev);
+		} else {
+			RealMediaMode = MEDIA_1000FULL;
+		}
+
+		priv->LinkState = INS_LINK_UP;
+
+		switch (RealMediaMode) {
+		case MEDIA_1000FULL:
+			debug ("ax88180: 1000Mbps Full-duplex mode.\n");
+			rxcfg_val = RXFLOW_ENABLE | DEFAULT_RXCFG;
+			maccfg0_val = TXFLOW_ENABLE | DEFAULT_MACCFG0;
+			maccfg1_val = GIGA_MODE_EN | RXFLOW_EN |
+			    FULLDUPLEX | DEFAULT_MACCFG1;
+			break;
+
+		case MEDIA_1000HALF:
+			debug ("ax88180: 1000Mbps Half-duplex mode.\n");
+			rxcfg_val = DEFAULT_RXCFG;
+			maccfg0_val = DEFAULT_MACCFG0;
+			maccfg1_val = GIGA_MODE_EN | DEFAULT_MACCFG1;
+			break;
+
+		case MEDIA_100FULL:
+			debug ("ax88180: 100Mbps Full-duplex mode.\n");
+			rxcfg_val = RXFLOW_ENABLE | DEFAULT_RXCFG;
+			maccfg0_val = SPEED100 | TXFLOW_ENABLE
+			    | DEFAULT_MACCFG0;
+			maccfg1_val = RXFLOW_EN | FULLDUPLEX | DEFAULT_MACCFG1;
+			break;
+
+		case MEDIA_100HALF:
+			debug ("ax88180: 100Mbps Half-duplex mode.\n");
+			rxcfg_val = DEFAULT_RXCFG;
+			maccfg0_val = SPEED100 | DEFAULT_MACCFG0;
+			maccfg1_val = DEFAULT_MACCFG1;
+			break;
+
+		case MEDIA_10FULL:
+			debug ("ax88180: 10Mbps Full-duplex mode.\n");
+			rxcfg_val = RXFLOW_ENABLE | DEFAULT_RXCFG;
+			maccfg0_val = TXFLOW_ENABLE | DEFAULT_MACCFG0;
+			maccfg1_val = RXFLOW_EN | FULLDUPLEX | DEFAULT_MACCFG1;
+			break;
+
+		case MEDIA_10HALF:
+			debug ("ax88180: 10Mbps Half-duplex mode.\n");
+			rxcfg_val = DEFAULT_RXCFG;
+			maccfg0_val = DEFAULT_MACCFG0;
+			maccfg1_val = DEFAULT_MACCFG1;
+			break;
+		default:
+			debug ("ax88180: Unknow media mode.\n");
+			rxcfg_val = DEFAULT_RXCFG;
+			maccfg0_val = DEFAULT_MACCFG0;
+			maccfg1_val = DEFAULT_MACCFG1;
+
+			priv->LinkState = INS_LINK_DOWN;
+			break;
+		}
+
+	} else {
+		rxcfg_val = DEFAULT_RXCFG;
+		maccfg0_val = DEFAULT_MACCFG0;
+		maccfg1_val = DEFAULT_MACCFG1;
+
+		priv->LinkState = INS_LINK_DOWN;
+	}
+
+	OUTW (dev, rxcfg_val, RXCFG);
+	OUTW (dev, maccfg0_val, MACCFG0);
+	OUTW (dev, maccfg1_val, MACCFG1);
+
+	return;
+}
+
+static unsigned long get_MarvellPHY_meida_mode (struct eth_device *dev)
+{
+	unsigned long m88_ssr;
+	unsigned long MediaMode;
+
+	m88_ssr = ax88180_mdio_read (dev, M88_SSR);
+	switch (m88_ssr & SSR_MEDIA_MASK) {
+	case SSR_1000FULL:
+		MediaMode = MEDIA_1000FULL;
+		break;
+	case SSR_1000HALF:
+		MediaMode = MEDIA_1000HALF;
+		break;
+	case SSR_100FULL:
+		MediaMode = MEDIA_100FULL;
+		break;
+	case SSR_100HALF:
+		MediaMode = MEDIA_100HALF;
+		break;
+	case SSR_10FULL:
+		MediaMode = MEDIA_10FULL;
+		break;
+	case SSR_10HALF:
+		MediaMode = MEDIA_10HALF;
+		break;
+	default:
+		MediaMode = MEDIA_UNKNOWN;
+		break;
+	}
+
+	return MediaMode;
+}
+
+static unsigned long get_CicadaPHY_meida_mode (struct eth_device *dev)
+{
+	unsigned long tmp_regval;
+	unsigned long MediaMode;
+
+	tmp_regval = ax88180_mdio_read (dev, CIS_AUX_CTRL_STATUS);
+	switch (tmp_regval & CIS_MEDIA_MASK) {
+	case CIS_1000FULL:
+		MediaMode = MEDIA_1000FULL;
+		break;
+	case CIS_1000HALF:
+		MediaMode = MEDIA_1000HALF;
+		break;
+	case CIS_100FULL:
+		MediaMode = MEDIA_100FULL;
+		break;
+	case CIS_100HALF:
+		MediaMode = MEDIA_100HALF;
+		break;
+	case CIS_10FULL:
+		MediaMode = MEDIA_10FULL;
+		break;
+	case CIS_10HALF:
+		MediaMode = MEDIA_10HALF;
+		break;
+	default:
+		MediaMode = MEDIA_UNKNOWN;
+		break;
+	}
+
+	return MediaMode;
+}
+
+static void ax88180_halt (struct eth_device *dev)
+{
+	/* Disable AX88180 TX/RX functions */
+	OUTW (dev, WAKEMOD, CMD);
+}
+
+static int ax88180_init (struct eth_device *dev, bd_t * bd)
+{
+	struct ax88180_private *priv = (struct ax88180_private *)dev->priv;
+	unsigned short tmp_regval;
+
+	ax88180_mac_reset (dev);
+
+	/* Disable interrupt */
+	OUTW (dev, CLEAR_IMR, IMR);
+
+	/* Disable AX88180 TX/RX functions */
+	OUTW (dev, WAKEMOD, CMD);
+
+	/* Fill the MAC address */
+	tmp_regval =
+	    dev->enetaddr[0] | (((unsigned short)dev->enetaddr[1]) << 8);
+	OUTW (dev, tmp_regval, MACID0);
+
+	tmp_regval =
+	    dev->enetaddr[2] | (((unsigned short)dev->enetaddr[3]) << 8);
+	OUTW (dev, tmp_regval, MACID1);
+
+	tmp_regval =
+	    dev->enetaddr[4] | (((unsigned short)dev->enetaddr[5]) << 8);
+	OUTW (dev, tmp_regval, MACID2);
+
+	ax88180_meidia_config (dev);
+
+	OUTW (dev, DEFAULT_RXFILTER, RXFILTER);
+
+	/* Initial variables here */
+	priv->FirstTxDesc = TXDP0;
+	priv->NextTxDesc = TXDP0;
+
+	/* Check if there is any invalid interrupt status and clear it. */
+	OUTW (dev, INW (dev, ISR), ISR);
+
+	/* Start AX88180 TX/RX functions */
+	OUTW (dev, (RXEN | TXEN | WAKEMOD), CMD);
+
+	return 0;
+}
+
+/* Get a data block via Ethernet */
+static int ax88180_recv (struct eth_device *dev)
+{
+	unsigned short ISR_Status;
+	unsigned short tmp_regval;
+
+	/* Read and check interrupt status here. */
+	ISR_Status = INW (dev, ISR);
+
+	while (ISR_Status) {
+		/* Clear the interrupt status */
+		OUTW (dev, ISR_Status, ISR);
+
+		debug ("\nax88180: The interrupt status = 0x%04x\n",
+		       ISR_Status);
+
+		if (ISR_Status & ISR_PHY) {
+			/* Read ISR register once to clear PHY interrupt bit */
+			tmp_regval = ax88180_mdio_read (dev, M88_ISR);
+			ax88180_meidia_config (dev);
+		}
+
+		if ((ISR_Status & ISR_RX) || (ISR_Status & ISR_RXBUFFOVR)) {
+			ax88180_rx_handler (dev);
+		}
+
+		/* Read and check interrupt status again */
+		ISR_Status = INW (dev, ISR);
+	}
+
+	return 0;
+}
+
+/* Send a data block via Ethernet. */
+static int
+ax88180_send (struct eth_device *dev, volatile void *packet, int length)
+{
+	struct ax88180_private *priv = (struct ax88180_private *)dev->priv;
+	unsigned short TXDES_addr;
+	unsigned short txcmd_txdp, txbs_txdp;
+	unsigned short tmp_data;
+	int i;
+#if defined (CONFIG_DRIVER_AX88180_16BIT)
+	volatile unsigned short *txdata = (volatile unsigned short *)packet;
+#else
+	volatile unsigned long *txdata = (volatile unsigned long *)packet;
+#endif
+	unsigned short count;
+
+	if (priv->LinkState != INS_LINK_UP) {
+		return 0;
+	}
+
+	priv->FirstTxDesc = priv->NextTxDesc;
+	txbs_txdp = 1 << priv->FirstTxDesc;
+
+	debug ("ax88180: TXDP%d is available\n", priv->FirstTxDesc);
+
+	txcmd_txdp = priv->FirstTxDesc << 13;
+	TXDES_addr = TXDES0 + (priv->FirstTxDesc << 2);
+
+	OUTW (dev, (txcmd_txdp | length | TX_START_WRITE), TXCMD);
+
+	/* Comput access times */
+	count = (length + priv->PadSize) >> priv->BusWidth;
+
+	for (i = 0; i < count; i++) {
+		WRITE_TXBUF (dev, *(txdata + i));
+	}
+
+	OUTW (dev, txcmd_txdp | length, TXCMD);
+	OUTW (dev, txbs_txdp, TXBS);
+	OUTW (dev, (TXDPx_ENABLE | length), TXDES_addr);
+
+	priv->NextTxDesc = (priv->NextTxDesc + 1) & TXDP_MASK;
+
+	/*
+	 * Check the available transmit descriptor, if we had exhausted all
+	 * transmit descriptor ,then we have to wait for at least one free
+	 * descriptor
+	 */
+	txbs_txdp = 1 << priv->NextTxDesc;
+	tmp_data = INW (dev, TXBS);
+
+	if (tmp_data & txbs_txdp) {
+		if (ax88180_poll_tx_complete (dev) < 0) {
+			ax88180_mac_reset (dev);
+			priv->FirstTxDesc = TXDP0;
+			priv->NextTxDesc = TXDP0;
+			printf ("ax88180: Transmit time out occurred!\n");
+		}
+	}
+
+	return 0;
+}
+
+static void ax88180_read_mac_addr (struct eth_device *dev)
+{
+	unsigned short macid0_val, macid1_val, macid2_val;
+	unsigned short tmp_regval;
+	unsigned short i;
+
+	/* Reload MAC address from EEPROM */
+	OUTW (dev, RELOAD_EEPROM, PROMCTRL);
+
+	/* Waiting for reload eeprom completion */
+	for (i = 0; i < 500; i++) {
+		tmp_regval = INW (dev, PROMCTRL);
+		if ((tmp_regval & RELOAD_EEPROM) == 0)
+			break;
+		udelay (1000);
+	}
+
+	/* Get MAC addresses */
+	macid0_val = INW (dev, MACID0);
+	macid1_val = INW (dev, MACID1);
+	macid2_val = INW (dev, MACID2);
+
+	if (((macid0_val | macid1_val | macid2_val) != 0) &&
+	    ((macid0_val & 0x01) == 0)) {
+		dev->enetaddr[0] = (unsigned char)macid0_val;
+		dev->enetaddr[1] = (unsigned char)(macid0_val >> 8);
+		dev->enetaddr[2] = (unsigned char)macid1_val;
+		dev->enetaddr[3] = (unsigned char)(macid1_val >> 8);
+		dev->enetaddr[4] = (unsigned char)macid2_val;
+		dev->enetaddr[5] = (unsigned char)(macid2_val >> 8);
+	}
+}
+
+/*
+===========================================================================
+<<<<<<			Exported SubProgram Bodies		>>>>>>
+===========================================================================
+*/
+int ax88180_initialize (bd_t * bis)
+{
+	struct eth_device *dev;
+	struct ax88180_private *priv;
+
+	dev = (struct eth_device *)malloc (sizeof *dev);
+
+	if (NULL == dev)
+		return 0;
+
+	memset (dev, 0, sizeof *dev);
+
+	priv = (struct ax88180_private *)malloc (sizeof (*priv));
+
+	if (NULL == priv)
+		return 0;
+
+	memset (priv, 0, sizeof *priv);
+
+	sprintf (dev->name, "ax88180");
+	dev->iobase = AX88180_BASE;
+	dev->priv = priv;
+	dev->init = ax88180_init;
+	dev->halt = ax88180_halt;
+	dev->send = ax88180_send;
+	dev->recv = ax88180_recv;
+
+	priv->BusWidth = BUS_WIDTH_32;
+	priv->PadSize = 3;
+#if defined (CONFIG_DRIVER_AX88180_16BIT)
+	OUTW (dev, (START_BASE >> 8), BASE);
+	OUTW (dev, DECODE_EN, DECODE);
+
+	priv->BusWidth = BUS_WIDTH_16;
+	priv->PadSize = 1;
+#endif
+
+	ax88180_mac_reset (dev);
+
+	/* Disable interrupt */
+	OUTW (dev, CLEAR_IMR, IMR);
+
+	/* Disable AX88180 TX/RX functions */
+	OUTW (dev, WAKEMOD, CMD);
+
+	ax88180_read_mac_addr (dev);
+
+	eth_register (dev);
+
+	return ax88180_phy_initial (dev);
+
+}
diff --git a/drivers/net/ax88180.h b/drivers/net/ax88180.h
new file mode 100644
index 000000000..d2113df4b
--- /dev/null
+++ b/drivers/net/ax88180.h
@@ -0,0 +1,412 @@
+/* ax88180.h: ASIX AX88180 Non-PCI Gigabit Ethernet u-boot driver */
+/*
+ *
+ *  This program is free software; you can distribute it and/or modify it
+ *  under the terms of the GNU General Public License (Version 2) as
+ *  published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope it will be useful, but WITHOUT
+ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ *  for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ */
+
+#ifndef _AX88180_H_
+#define _AX88180_H_
+
+#include <asm/types.h>
+#include <config.h>
+
+typedef enum _ax88180_link_state {
+	INS_LINK_DOWN,
+	INS_LINK_UP,
+	INS_LINK_UNKNOWN
+} ax88180_link_state;
+
+struct ax88180_private {
+	unsigned char BusWidth;
+	unsigned char PadSize;
+	unsigned short PhyAddr;
+	unsigned short PhyID0;
+	unsigned short FirstTxDesc;
+	unsigned short NextTxDesc;
+	ax88180_link_state LinkState;
+};
+
+#define BUS_WIDTH_16			1
+#define BUS_WIDTH_32			2
+
+#define ENABLE_JUMBO			1
+#define DISABLE_JUMBO			0
+
+#define ENABLE_BURST			1
+#define DISABLE_BURST			0
+
+#define NORMAL_RX_MODE		0
+#define RX_LOOPBACK_MODE		1
+#define RX_INIFINIT_LOOP_MODE		2
+#define TX_INIFINIT_LOOP_MODE		3
+
+#define DEFAULT_ETH_MTU		1500
+
+/* Jumbo packet size 4086 bytes included 4 bytes CRC*/
+#define MAX_JUMBO_MTU		4072
+
+/* Max Tx Jumbo size 4086 bytes included 4 bytes CRC */
+#define MAX_TX_JUMBO_SIZE		4086
+
+/* Max Rx Jumbo size is 15K Bytes */
+#define MAX_RX_SIZE			0x3C00
+
+#define MARVELL_88E1111_PHYADDR	0x18
+#define MARVELL_88E1111_PHYIDR0	0x0141
+
+#define CICADA_CIS8201_PHYADDR	0x01
+#define CICADA_CIS8201_PHYIDR0		0x000F
+
+#define MEDIA_AUTO			0
+#define MEDIA_1000FULL			1
+#define MEDIA_1000HALF			2
+#define MEDIA_100FULL			3
+#define MEDIA_100HALF			4
+#define MEDIA_10FULL			5
+#define MEDIA_10HALF			6
+#define MEDIA_UNKNOWN		7
+
+#define AUTO_MEDIA			0
+#define FORCE_MEDIA			1
+
+#define TXDP_MASK			3
+#define TXDP0				0
+#define TXDP1				1
+#define TXDP2				2
+#define TXDP3				3
+
+#define CMD_MAP_SIZE			0x100
+
+#if defined (CONFIG_DRIVER_AX88180_16BIT)
+  #define AX88180_MEMORY_SIZE		0x00004000
+  #define START_BASE			0x1000
+
+  #define RX_BUF_SIZE			0x1000
+  #define TX_BUF_SIZE			0x0F00
+
+  #define TX_BASE			START_BASE
+  #define CMD_BASE			(TX_BASE + TX_BUF_SIZE)
+  #define RX_BASE			(CMD_BASE + CMD_MAP_SIZE)
+#else
+  #define AX88180_MEMORY_SIZE	0x00010000
+
+  #define RX_BUF_SIZE			0x8000
+  #define TX_BUF_SIZE			0x7C00
+
+  #define RX_BASE			0x0000
+  #define TX_BASE			(RX_BASE + RX_BUF_SIZE)
+  #define CMD_BASE			(TX_BASE + TX_BUF_SIZE)
+#endif
+
+/* AX88180 Memory Mapping Definition */
+#define RXBUFFER_START			RX_BASE
+  #define RX_PACKET_LEN_OFFSET	0
+  #define RX_PAGE_NUM_MASK		0x7FF	/* RX pages 0~7FFh */
+#define TXBUFFER_START			TX_BASE
+
+/* AX88180 MAC Register Definition */
+#define DECODE		(0)
+  #define DECODE_EN		0x00000001
+#define BASE		(6)
+#define CMD		(CMD_BASE + 0x0000)
+  #define WAKEMOD		0x00000001
+  #define TXEN			0x00000100
+  #define RXEN			0x00000200
+  #define DEFAULT_CMD		WAKEMOD
+#define IMR		(CMD_BASE + 0x0004)
+  #define IMR_RXBUFFOVR	0x00000001
+  #define IMR_WATCHDOG	0x00000002
+  #define IMR_TX		0x00000008
+  #define IMR_RX		0x00000010
+  #define IMR_PHY		0x00000020
+  #define CLEAR_IMR		0x00000000
+  #define DEFAULT_IMR		(IMR_PHY | IMR_RX | IMR_TX |\
+					 IMR_RXBUFFOVR | IMR_WATCHDOG)
+#define ISR		(CMD_BASE + 0x0008)
+  #define ISR_RXBUFFOVR	0x00000001
+  #define ISR_WATCHDOG	0x00000002
+  #define ISR_TX			0x00000008
+  #define ISR_RX			0x00000010
+  #define ISR_PHY		0x00000020
+#define TXCFG		(CMD_BASE + 0x0010)
+  #define AUTOPAD_CRC		0x00000050
+  #define DEFAULT_TXCFG	AUTOPAD_CRC
+#define TXCMD		(CMD_BASE + 0x0014)
+  #define TXCMD_TXDP_MASK	0x00006000
+  #define TXCMD_TXDP0		0x00000000
+  #define TXCMD_TXDP1		0x00002000
+  #define TXCMD_TXDP2		0x00004000
+  #define TXCMD_TXDP3		0x00006000
+  #define TX_START_WRITE	0x00008000
+  #define TX_STOP_WRITE		0x00000000
+  #define DEFAULT_TXCMD	0x00000000
+#define TXBS		(CMD_BASE + 0x0018)
+  #define TXDP0_USED		0x00000001
+  #define TXDP1_USED		0x00000002
+  #define TXDP2_USED		0x00000004
+  #define TXDP3_USED		0x00000008
+  #define DEFAULT_TXBS		0x00000000
+#define TXDES0		(CMD_BASE + 0x0020)
+  #define TXDPx_ENABLE		0x00008000
+  #define TXDPx_LEN_MASK	0x00001FFF
+  #define DEFAULT_TXDES0	0x00000000
+#define TXDES1		(CMD_BASE + 0x0024)
+  #define TXDPx_ENABLE		0x00008000
+  #define TXDPx_LEN_MASK	0x00001FFF
+  #define DEFAULT_TXDES1	0x00000000
+#define TXDES2		(CMD_BASE + 0x0028)
+  #define TXDPx_ENABLE		0x00008000
+  #define TXDPx_LEN_MASK	0x00001FFF
+  #define DEFAULT_TXDES2	0x00000000
+#define TXDES3		(CMD_BASE + 0x002C)
+  #define TXDPx_ENABLE		0x00008000
+  #define TXDPx_LEN_MASK	0x00001FFF
+  #define DEFAULT_TXDES3	0x00000000
+#define RXCFG		(CMD_BASE + 0x0030)
+  #define RXBUFF_PROTECT	0x00000001
+  #define RXTCPCRC_CHECK	0x00000010
+  #define RXFLOW_ENABLE	0x00000100
+  #define DEFAULT_RXCFG	RXBUFF_PROTECT
+#define RXCURT		(CMD_BASE + 0x0034)
+  #define DEFAULT_RXCURT	0x00000000
+#define RXBOUND	(CMD_BASE + 0x0038)
+  #define DEFAULT_RXBOUND	0x7FF		/* RX pages 0~7FFh */
+#define MACCFG0	(CMD_BASE + 0x0040)
+  #define MACCFG0_BIT3_0	0x00000007
+  #define IPGT_VAL		0x00000150
+  #define TXFLOW_ENABLE	0x00001000
+  #define SPEED100		0x00008000
+  #define DEFAULT_MACCFG0	(IPGT_VAL | MACCFG0_BIT3_0)
+#define MACCFG1	(CMD_BASE + 0x0044)
+  #define RGMII_EN		0x00000002
+  #define RXFLOW_EN		0x00000020
+  #define FULLDUPLEX		0x00000040
+  #define MAX_JUMBO_LEN	0x00000780
+  #define RXJUMBO_EN		0x00000800
+  #define GIGA_MODE_EN	0x00001000
+  #define RXCRC_CHECK		0x00002000
+  #define RXPAUSE_DA_CHECK	0x00004000
+
+  #define JUMBO_LEN_4K		0x00000200
+  #define JUMBO_LEN_15K	0x00000780
+  #define DEFAULT_MACCFG1	(RXCRC_CHECK | RXPAUSE_DA_CHECK | \
+				 RGMII_EN)
+  #define CICADA_DEFAULT_MACCFG1	(RXCRC_CHECK | RXPAUSE_DA_CHECK)
+#define MACCFG2		(CMD_BASE + 0x0048)
+  #define MACCFG2_BIT15_8	0x00000100
+  #define JAM_LIMIT_MASK	0x000000FC
+  #define DEFAULT_JAM_LIMIT	0x00000064
+  #define DEFAULT_MACCFG2	MACCFG2_BIT15_8
+#define MACCFG3		(CMD_BASE + 0x004C)
+  #define IPGR2_VAL		0x0000000E
+  #define IPGR1_VAL		0x00000600
+  #define NOABORT		0x00008000
+  #define DEFAULT_MACCFG3	(IPGR1_VAL | IPGR2_VAL)
+#define TXPAUT		(CMD_BASE + 0x0054)
+  #define DEFAULT_TXPAUT	0x001FE000
+#define RXBTHD0		(CMD_BASE + 0x0058)
+  #define DEFAULT_RXBTHD0	0x00000300
+#define RXBTHD1		(CMD_BASE + 0x005C)
+  #define DEFAULT_RXBTHD1	0x00000600
+#define RXFULTHD	(CMD_BASE + 0x0060)
+  #define DEFAULT_RXFULTHD	0x00000100
+#define MISC		(CMD_BASE + 0x0068)
+  /* Normal operation mode */
+  #define MISC_NORMAL		0x00000003
+  /* Clear bit 0 to reset MAC */
+  #define MISC_RESET_MAC	0x00000002
+  /* Clear bit 1 to reset PHY */
+  #define MISC_RESET_PHY	0x00000001
+  /* Clear bit 0 and 1 to reset MAC and PHY */
+  #define MISC_RESET_MAC_PHY	0x00000000
+  #define DEFAULT_MISC		MISC_NORMAL
+#define MACID0		(CMD_BASE + 0x0070)
+#define MACID1		(CMD_BASE + 0x0074)
+#define MACID2		(CMD_BASE + 0x0078)
+#define TXLEN		(CMD_BASE + 0x007C)
+  #define DEFAULT_TXLEN	0x000005FC
+#define RXFILTER	(CMD_BASE + 0x0080)
+  #define RX_RXANY		0x00000001
+  #define RX_MULTICAST		0x00000002
+  #define RX_UNICAST		0x00000004
+  #define RX_BROADCAST	0x00000008
+  #define RX_MULTI_HASH	0x00000010
+  #define DISABLE_RXFILTER	0x00000000
+  #define DEFAULT_RXFILTER	(RX_BROADCAST + RX_UNICAST)
+#define MDIOCTRL	(CMD_BASE + 0x0084)
+  #define PHY_ADDR_MASK	0x0000001F
+  #define REG_ADDR_MASK	0x00001F00
+  #define READ_PHY		0x00004000
+  #define WRITE_PHY		0x00008000
+#define MDIODP		(CMD_BASE + 0x0088)
+#define GPIOCTRL	(CMD_BASE + 0x008C)
+#define RXINDICATOR	(CMD_BASE + 0x0090)
+  #define RX_START_READ	0x00000001
+  #define RX_STOP_READ		0x00000000
+  #define DEFAULT_RXINDICATOR	RX_STOP_READ
+#define TXST		(CMD_BASE + 0x0094)
+#define MDCCLKPAT	(CMD_BASE + 0x00A0)
+#define RXIPCRCCNT	(CMD_BASE + 0x00A4)
+#define RXCRCCNT	(CMD_BASE + 0x00A8)
+#define TXFAILCNT	(CMD_BASE + 0x00AC)
+#define PROMDP		(CMD_BASE + 0x00B0)
+#define PROMCTRL	(CMD_BASE + 0x00B4)
+  #define RELOAD_EEPROM	0x00000200
+#define MAXRXLEN	(CMD_BASE + 0x00B8)
+#define HASHTAB0	(CMD_BASE + 0x00C0)
+#define HASHTAB1	(CMD_BASE + 0x00C4)
+#define HASHTAB2	(CMD_BASE + 0x00C8)
+#define HASHTAB3	(CMD_BASE + 0x00CC)
+#define DOGTHD0	(CMD_BASE + 0x00E0)
+  #define DEFAULT_DOGTHD0	0x0000FFFF
+#define DOGTHD1	(CMD_BASE + 0x00E4)
+  #define START_WATCHDOG_TIMER	0x00008000
+  #define DEFAULT_DOGTHD1		0x00000FFF
+#define SOFTRST		(CMD_BASE + 0x00EC)
+  #define SOFTRST_NORMAL	0x00000003
+  #define SOFTRST_RESET_MAC	0x00000002
+
+/* External PHY Register Definition */
+#define BMCR		0x0000
+  #define LINE_SPEED_MSB	0x0040
+  #define DUPLEX_MODE		0x0100
+  #define RESTART_AUTONEG	0x0200
+  #define POWER_DOWN		0x0800
+  #define AUTONEG_EN		0x1000
+  #define LINE_SPEED_LSB	0x2000
+  #define PHY_RESET		0x8000
+
+  #define MEDIAMODE_MASK	(LINE_SPEED_MSB | LINE_SPEED_LSB |\
+				 DUPLEX_MODE)
+  #define BMCR_SPEED_1000	LINE_SPEED_MSB
+  #define BMCR_SPEED_100	LINE_SPEED_LSB
+  #define BMCR_SPEED_10	0x0000
+
+  #define BMCR_1000FULL	(BMCR_SPEED_1000 | DUPLEX_MODE)
+  #define BMCR_100FULL		(BMCR_SPEED_100 | DUPLEX_MODE)
+  #define BMCR_100HALF		BMCR_SPEED_100
+  #define BMCR_10FULL		DUPLEX_MODE
+  #define BMCR_10HALF		0x0000
+#define BMSR		0x0001
+  #define LINKOK		0x0004
+  #define AUTONEG_ENABLE_STS	0x0008
+  #define AUTONEG_COMPLETE	0x0020
+#define PHYIDR0		0x0002
+#define PHYIDR1		0x0003
+#define ANAR		0x0004
+  #define ANAR_PAUSE		0x0400
+  #define ANAR_100FULL		0x0100
+  #define ANAR_100HALF		0x0080
+  #define ANAR_10FULL		0x0040
+  #define ANAR_10HALF		0x0020
+  #define ANAR_8023BIT		0x0001
+#define ANLPAR		0x0005
+#define ANER		0x0006
+#define AUX_1000_CTRL	0x0009
+  #define ENABLE_1000HALF	0x0100
+  #define ENABLE_1000FULL	0x0200
+  #define DEFAULT_AUX_1000_CTRL	(ENABLE_1000HALF | ENABLE_1000FULL)
+#define AUX_1000_STATUS	0x000A
+  #define LP_1000HALF		0x0400
+  #define LP_1000FULL		0x0800
+
+/* Marvell 88E1111 Gigabit PHY Register Definition */
+#define M88_SSR		0x0011
+  #define SSR_SPEED_MASK	0xC000
+  #define SSR_SPEED_1000		0x8000
+  #define SSR_SPEED_100		0x4000
+  #define SSR_SPEED_10		0x0000
+  #define SSR_DUPLEX		0x2000
+  #define SSR_MEDIA_RESOLVED_OK	0x0800
+
+  #define SSR_MEDIA_MASK	(SSR_SPEED_MASK | SSR_DUPLEX)
+  #define SSR_1000FULL		(SSR_SPEED_1000 | SSR_DUPLEX)
+  #define SSR_1000HALF		SSR_SPEED_1000
+  #define SSR_100FULL		(SSR_SPEED_100 | SSR_DUPLEX)
+  #define SSR_100HALF		SSR_SPEED_100
+  #define SSR_10FULL		(SSR_SPEED_10 | SSR_DUPLEX)
+  #define SSR_10HALF		SSR_SPEED_10
+#define M88_IER		0x0012
+  #define LINK_CHANGE_INT	0x0400
+#define M88_ISR		0x0013
+  #define LINK_CHANGE_STATUS	0x0400
+#define M88_EXT_SCR	0x0014
+  #define RGMII_RXCLK_DELAY	0x0080
+  #define RGMII_TXCLK_DELAY	0x0002
+  #define DEFAULT_EXT_SCR	(RGMII_TXCLK_DELAY | RGMII_RXCLK_DELAY)
+#define M88_EXT_SSR	0x001B
+  #define HWCFG_MODE_MASK	0x000F
+  #define RGMII_COPPER_MODE	0x000B
+
+/* CICADA CIS8201 Gigabit PHY Register Definition */
+#define CIS_IMR		0x0019
+  #define CIS_INT_ENABLE	0x8000
+  #define CIS_LINK_CHANGE_INT	0x2000
+#define CIS_ISR		0x001A
+  #define CIS_INT_PENDING	0x8000
+  #define CIS_LINK_CHANGE_STATUS	0x2000
+#define CIS_AUX_CTRL_STATUS	0x001C
+  #define CIS_AUTONEG_COMPLETE	0x8000
+  #define CIS_SPEED_MASK	0x0018
+  #define CIS_SPEED_1000		0x0010
+  #define CIS_SPEED_100		0x0008
+  #define CIS_SPEED_10		0x0000
+  #define CIS_DUPLEX		0x0020
+
+  #define CIS_MEDIA_MASK	(CIS_SPEED_MASK | CIS_DUPLEX)
+  #define CIS_1000FULL		(CIS_SPEED_1000 | CIS_DUPLEX)
+  #define CIS_1000HALF		CIS_SPEED_1000
+  #define CIS_100FULL		(CIS_SPEED_100 | CIS_DUPLEX)
+  #define CIS_100HALF		CIS_SPEED_100
+  #define CIS_10FULL		(CIS_SPEED_10 | CIS_DUPLEX)
+  #define CIS_10HALF		CIS_SPEED_10
+  #define CIS_SMI_PRIORITY	0x0004
+
+static inline unsigned short INW (struct eth_device *dev, unsigned long addr)
+{
+	return le16_to_cpu (*(volatile unsigned short *) (addr + dev->iobase));
+}
+
+static inline void OUTW (struct eth_device *dev, unsigned short command, unsigned long addr)
+{
+	*(volatile unsigned short *) ((addr + dev->iobase)) = cpu_to_le16 (command);
+}
+
+/*
+ Access RXBUFFER_START/TXBUFFER_START to read RX buffer/write TX buffer
+*/
+#if defined (CONFIG_DRIVER_AX88180_16BIT)
+static inline unsigned short READ_RXBUF (struct eth_device *dev)
+{
+	return le16_to_cpu (*(volatile unsigned short *) (RXBUFFER_START + dev->iobase));
+}
+
+static inline void WRITE_TXBUF (struct eth_device *dev, unsigned short data)
+{
+	*(volatile unsigned short *) ((TXBUFFER_START + dev->iobase)) = cpu_to_le16 (data);
+}
+#else
+static inline unsigned long READ_RXBUF (struct eth_device *dev)
+{
+	return le32_to_cpu (*(volatile unsigned long *) (RXBUFFER_START + dev->iobase));
+}
+
+static inline void WRITE_TXBUF (struct eth_device *dev, unsigned long data)
+{
+	*(volatile unsigned long *) ((TXBUFFER_START + dev->iobase)) = cpu_to_le32 (data);
+}
+#endif
+
+#endif /* _AX88180_H_ */
diff --git a/drivers/net/ax88796.c b/drivers/net/ax88796.c
index 39cd101f0..20891418a 100644
--- a/drivers/net/ax88796.c
+++ b/drivers/net/ax88796.c
@@ -143,7 +143,7 @@ static void ax88796_mac_read(u8 *buff)
 	}
 }
 
-int get_prom(u8* mac_addr)
+int get_prom(u8* mac_addr, u8* base_addr)
 {
 	u8 prom[32];
 	int i;
diff --git a/drivers/net/bcm570x.c b/drivers/net/bcm570x.c
index 6b28b95eb..185764ef5 100644
--- a/drivers/net/bcm570x.c
+++ b/drivers/net/bcm570x.c
@@ -439,9 +439,9 @@ int eth_init (bd_t * bis)
 	/* Setup timer delays */
 	if (T3_ASIC_REV (pDevice->ChipRevId) == T3_ASIC_REV_5701) {
 		pDevice->UseTaggedStatus = TRUE;
-		pUmDevice->timer_interval = CFG_HZ;
+		pUmDevice->timer_interval = CONFIG_SYS_HZ;
 	} else {
-		pUmDevice->timer_interval = CFG_HZ / 50;
+		pUmDevice->timer_interval = CONFIG_SYS_HZ / 50;
 	}
 
 	/* Grab name .... */
@@ -458,15 +458,15 @@ int eth_init (bd_t * bis)
 	pUmDevice->rx_last_cnt = pUmDevice->tx_last_cnt = 0;
 
 	/* delay for 4 seconds */
-	pUmDevice->delayed_link_ind = (4 * CFG_HZ) / pUmDevice->timer_interval;
+	pUmDevice->delayed_link_ind = (4 * CONFIG_SYS_HZ) / pUmDevice->timer_interval;
 
-	pUmDevice->adaptive_expiry = CFG_HZ / pUmDevice->timer_interval;
+	pUmDevice->adaptive_expiry = CONFIG_SYS_HZ / pUmDevice->timer_interval;
 
 	/* Sometimes we get spurious ints. after reset when link is down. */
 	/* This field tells the isr to service the int. even if there is */
 	/* no status block update. */
 	pUmDevice->adapter_just_inited =
-	    (3 * CFG_HZ) / pUmDevice->timer_interval;
+	    (3 * CONFIG_SYS_HZ) / pUmDevice->timer_interval;
 
 	/* Initialize 570x */
 	if (LM_InitializeAdapter (pDevice) != LM_STATUS_SUCCESS) {
@@ -1046,9 +1046,9 @@ LM_STATUS MM_GetConfig (PLM_DEVICE_BLOCK pDevice)
 
 	if (T3_ASIC_REV (pDevice->ChipRevId) == T3_ASIC_REV_5701) {
 		pDevice->UseTaggedStatus = TRUE;
-		pUmDevice->timer_interval = CFG_HZ;
+		pUmDevice->timer_interval = CONFIG_SYS_HZ;
 	} else {
-		pUmDevice->timer_interval = CFG_HZ / 50;
+		pUmDevice->timer_interval = CONFIG_SYS_HZ / 50;
 	}
 
 	pDevice->TxPacketDescCnt = tx_pkt_desc_cnt[index];
diff --git a/drivers/net/bfin_mac.c b/drivers/net/bfin_mac.c
index 3ee5d9603..504fd100a 100644
--- a/drivers/net/bfin_mac.c
+++ b/drivers/net/bfin_mac.c
@@ -9,6 +9,7 @@
 #include <common.h>
 #include <config.h>
 #include <net.h>
+#include <netdev.h>
 #include <command.h>
 #include <malloc.h>
 
@@ -465,7 +466,7 @@ ADI_ETHER_BUFFER *SetupTxBuffer(int no)
 	return buf;
 }
 
-#if defined(CONFIG_POST) && defined(CFG_POST_ETHER)
+#if defined(CONFIG_POST) && defined(CONFIG_SYS_POST_ETHER)
 int ether_post_test(int flags)
 {
 	uchar buf[64];
diff --git a/drivers/net/cs8900.c b/drivers/net/cs8900.c
index ae1983ac0..35a9bafaa 100644
--- a/drivers/net/cs8900.c
+++ b/drivers/net/cs8900.c
@@ -90,7 +90,7 @@ static void eth_reset (void)
 	udelay (200000);
 	/* Wait until the chip is reset */
 
-	tmo = get_timer (0) + 1 * CFG_HZ;
+	tmo = get_timer (0) + 1 * CONFIG_SYS_HZ;
 	while ((((us = get_reg_init_bus (PP_SelfSTAT)) & PP_SelfSTAT_InitD) == 0)
 		   && tmo < get_timer (0))
 		/*NOP*/;
@@ -244,7 +244,7 @@ retry:
 #ifdef DEBUG
 		printf ("cs: unable to send packet; retrying...\n");
 #endif
-		for (tmo = get_timer (0) + 5 * CFG_HZ; get_timer (0) < tmo;)
+		for (tmo = get_timer (0) + 5 * CONFIG_SYS_HZ; get_timer (0) < tmo;)
 			/*NOP*/;
 		eth_reset ();
 		eth_reginit ();
@@ -257,7 +257,7 @@ retry:
 		CS8900_RTDATA = *addr++;
 
 	/* wait for transfer to succeed */
-	tmo = get_timer (0) + 5 * CFG_HZ;
+	tmo = get_timer (0) + 5 * CONFIG_SYS_HZ;
 	while ((s = get_reg (PP_TER) & ~0x1F) == 0) {
 		if (get_timer (0) >= tmo)
 			break;
diff --git a/drivers/net/dc2114x.c b/drivers/net/dc2114x.c
index 811723904..c0137a7f2 100644
--- a/drivers/net/dc2114x.c
+++ b/drivers/net/dc2114x.c
@@ -21,6 +21,7 @@
 #include <common.h>
 #include <malloc.h>
 #include <net.h>
+#include <netdev.h>
 #include <pci.h>
 
 #undef DEBUG_SROM
diff --git a/drivers/net/dm9000x.c b/drivers/net/dm9000x.c
index 3a61b802e..ffb739de9 100644
--- a/drivers/net/dm9000x.c
+++ b/drivers/net/dm9000x.c
@@ -447,7 +447,7 @@ eth_send(volatile void *packet, int length)
 	DM9000_iow(DM9000_TCR, TCR_TXREQ); /* Cleared after TX complete */
 
 	/* wait for end of transmission */
-	tmo = get_timer(0) + 5 * CFG_HZ;
+	tmo = get_timer(0) + 5 * CONFIG_SYS_HZ;
 	while ( !(DM9000_ior(DM9000_NSR) & (NSR_TX1END | NSR_TX2END)) ||
 		!(DM9000_ior(DM9000_ISR) & IMR_PTM) ) {
 		if (get_timer(0) >= tmo) {
diff --git a/drivers/net/e1000.c b/drivers/net/e1000.c
index c8b4e98c6..2dcaa2c91 100644
--- a/drivers/net/e1000.c
+++ b/drivers/net/e1000.c
@@ -3059,5 +3059,5 @@ e1000_initialize(bd_t * bis)
 
 		card_number++;
 	}
-	return 1;
+	return card_number;
 }
diff --git a/drivers/net/e1000.h b/drivers/net/e1000.h
index c258bc238..08042a8cc 100644
--- a/drivers/net/e1000.h
+++ b/drivers/net/e1000.h
@@ -36,6 +36,7 @@
 #include <common.h>
 #include <malloc.h>
 #include <net.h>
+#include <netdev.h>
 #include <asm/io.h>
 #include <pci.h>
 
diff --git a/drivers/net/eepro100.c b/drivers/net/eepro100.c
index 9de0fb5e4..9c06b2556 100644
--- a/drivers/net/eepro100.c
+++ b/drivers/net/eepro100.c
@@ -24,6 +24,7 @@
 #include <common.h>
 #include <malloc.h>
 #include <net.h>
+#include <netdev.h>
 #include <asm/io.h>
 #include <pci.h>
 #include <miiphy.h>
@@ -193,14 +194,14 @@ struct descriptor {			/* A generic descriptor. */
 	unsigned char params[0];
 };
 
-#define CFG_CMD_EL		0x8000
-#define CFG_CMD_SUSPEND		0x4000
-#define CFG_CMD_INT		0x2000
-#define CFG_CMD_IAS		0x0001	/* individual address setup */
-#define CFG_CMD_CONFIGURE	0x0002	/* configure */
+#define CONFIG_SYS_CMD_EL		0x8000
+#define CONFIG_SYS_CMD_SUSPEND		0x4000
+#define CONFIG_SYS_CMD_INT		0x2000
+#define CONFIG_SYS_CMD_IAS		0x0001	/* individual address setup */
+#define CONFIG_SYS_CMD_CONFIGURE	0x0002	/* configure */
 
-#define CFG_STATUS_C		0x8000
-#define CFG_STATUS_OK		0x2000
+#define CONFIG_SYS_STATUS_C		0x8000
+#define CONFIG_SYS_STATUS_OK		0x2000
 
 	/* Misc.
 	 */
@@ -528,7 +529,7 @@ static int eepro100_init (struct eth_device *dev, bd_t * bis)
 	tx_next = ((tx_next + 1) % NUM_TX_DESC);
 
 	cfg_cmd = (struct descriptor *) &tx_ring[tx_cur];
-	cfg_cmd->command = cpu_to_le16 ((CFG_CMD_SUSPEND | CFG_CMD_CONFIGURE));
+	cfg_cmd->command = cpu_to_le16 ((CONFIG_SYS_CMD_SUSPEND | CONFIG_SYS_CMD_CONFIGURE));
 	cfg_cmd->status = 0;
 	cfg_cmd->link = cpu_to_le32 (phys_to_bus ((u32) & tx_ring[tx_next]));
 
@@ -536,7 +537,7 @@ static int eepro100_init (struct eth_device *dev, bd_t * bis)
 			sizeof (i82558_config_cmd));
 
 	if (!wait_for_eepro100 (dev)) {
-		printf ("Error---CFG_CMD_CONFIGURE: Can not reset ethernet controller.\n");
+		printf ("Error---CONFIG_SYS_CMD_CONFIGURE: Can not reset ethernet controller.\n");
 		goto Done;
 	}
 
@@ -544,7 +545,7 @@ static int eepro100_init (struct eth_device *dev, bd_t * bis)
 	OUTW (dev, SCB_M | CU_START, SCBCmd);
 
 	for (i = 0;
-	     !(le16_to_cpu (tx_ring[tx_cur].status) & CFG_STATUS_C);
+	     !(le16_to_cpu (tx_ring[tx_cur].status) & CONFIG_SYS_STATUS_C);
 	     i++) {
 		if (i >= TOUT_LOOP) {
 			printf ("%s: Tx error buffer not ready\n", dev->name);
@@ -552,7 +553,7 @@ static int eepro100_init (struct eth_device *dev, bd_t * bis)
 		}
 	}
 
-	if (!(le16_to_cpu (tx_ring[tx_cur].status) & CFG_STATUS_OK)) {
+	if (!(le16_to_cpu (tx_ring[tx_cur].status) & CONFIG_SYS_STATUS_OK)) {
 		printf ("TX error status = 0x%08X\n",
 			le16_to_cpu (tx_ring[tx_cur].status));
 		goto Done;
@@ -564,7 +565,7 @@ static int eepro100_init (struct eth_device *dev, bd_t * bis)
 	tx_next = ((tx_next + 1) % NUM_TX_DESC);
 
 	ias_cmd = (struct descriptor *) &tx_ring[tx_cur];
-	ias_cmd->command = cpu_to_le16 ((CFG_CMD_SUSPEND | CFG_CMD_IAS));
+	ias_cmd->command = cpu_to_le16 ((CONFIG_SYS_CMD_SUSPEND | CONFIG_SYS_CMD_IAS));
 	ias_cmd->status = 0;
 	ias_cmd->link = cpu_to_le32 (phys_to_bus ((u32) & tx_ring[tx_next]));
 
@@ -580,7 +581,7 @@ static int eepro100_init (struct eth_device *dev, bd_t * bis)
 	OUTL (dev, phys_to_bus ((u32) & tx_ring[tx_cur]), SCBPointer);
 	OUTW (dev, SCB_M | CU_START, SCBCmd);
 
-	for (i = 0; !(le16_to_cpu (tx_ring[tx_cur].status) & CFG_STATUS_C);
+	for (i = 0; !(le16_to_cpu (tx_ring[tx_cur].status) & CONFIG_SYS_STATUS_C);
 		 i++) {
 		if (i >= TOUT_LOOP) {
 			printf ("%s: Tx error buffer not ready\n",
@@ -589,7 +590,7 @@ static int eepro100_init (struct eth_device *dev, bd_t * bis)
 		}
 	}
 
-	if (!(le16_to_cpu (tx_ring[tx_cur].status) & CFG_STATUS_OK)) {
+	if (!(le16_to_cpu (tx_ring[tx_cur].status) & CONFIG_SYS_STATUS_OK)) {
 		printf ("TX error status = 0x%08X\n",
 			le16_to_cpu (tx_ring[tx_cur].status));
 		goto Done;
@@ -639,7 +640,7 @@ static int eepro100_send (struct eth_device *dev, volatile void *packet, int len
 	OUTL (dev, phys_to_bus ((u32) & tx_ring[tx_cur]), SCBPointer);
 	OUTW (dev, SCB_M | CU_START, SCBCmd);
 
-	for (i = 0; !(le16_to_cpu (tx_ring[tx_cur].status) & CFG_STATUS_C);
+	for (i = 0; !(le16_to_cpu (tx_ring[tx_cur].status) & CONFIG_SYS_STATUS_C);
 		 i++) {
 		if (i >= TOUT_LOOP) {
 			printf ("%s: Tx error buffer not ready\n", dev->name);
@@ -647,7 +648,7 @@ static int eepro100_send (struct eth_device *dev, volatile void *packet, int len
 		}
 	}
 
-	if (!(le16_to_cpu (tx_ring[tx_cur].status) & CFG_STATUS_OK)) {
+	if (!(le16_to_cpu (tx_ring[tx_cur].status) & CONFIG_SYS_STATUS_OK)) {
 		printf ("TX error status = 0x%08X\n",
 			le16_to_cpu (tx_ring[tx_cur].status));
 		goto Done;
diff --git a/drivers/net/fsl_mcdmafec.c b/drivers/net/fsl_mcdmafec.c
index 59524a5ed..d056010c7 100644
--- a/drivers/net/fsl_mcdmafec.c
+++ b/drivers/net/fsl_mcdmafec.c
@@ -56,12 +56,12 @@
 DECLARE_GLOBAL_DATA_PTR;
 
 struct fec_info_dma fec_info[] = {
-#ifdef CFG_FEC0_IOBASE
+#ifdef CONFIG_SYS_FEC0_IOBASE
 	{
 	 0,			/* index */
-	 CFG_FEC0_IOBASE,	/* io base */
-	 CFG_FEC0_PINMUX,	/* gpio pin muxing */
-	 CFG_FEC0_MIIBASE,	/* mii base */
+	 CONFIG_SYS_FEC0_IOBASE,	/* io base */
+	 CONFIG_SYS_FEC0_PINMUX,	/* gpio pin muxing */
+	 CONFIG_SYS_FEC0_MIIBASE,	/* mii base */
 	 -1,			/* phy_addr */
 	 0,			/* duplex and speed */
 	 0,			/* phy name */
@@ -83,17 +83,17 @@ struct fec_info_dma fec_info[] = {
 	 0,			/* cleanTbdNum */
 	 },
 #endif
-#ifdef CFG_FEC1_IOBASE
+#ifdef CONFIG_SYS_FEC1_IOBASE
 	{
 	 1,			/* index */
-	 CFG_FEC1_IOBASE,	/* io base */
-	 CFG_FEC1_PINMUX,	/* gpio pin muxing */
-	 CFG_FEC1_MIIBASE,	/* mii base */
+	 CONFIG_SYS_FEC1_IOBASE,	/* io base */
+	 CONFIG_SYS_FEC1_PINMUX,	/* gpio pin muxing */
+	 CONFIG_SYS_FEC1_MIIBASE,	/* mii base */
 	 -1,			/* phy_addr */
 	 0,			/* duplex and speed */
 	 0,			/* phy name */
 	 0,			/* phy name init */
-#ifdef CFG_DMA_USE_INTSRAM
+#ifdef CONFIG_SYS_DMA_USE_INTSRAM
 	 (cbd_t *)DBUF_LENGTH,	/* RX BD */
 #else
 	 0,			/* RX BD */
@@ -203,7 +203,7 @@ static int fec_send(struct eth_device *dev, volatile void *packet, int length)
 	miiphy_read(dev->name, info->phy_addr, PHY_BMSR, &phyStatus);
 
 	/* process all the consumed TBDs */
-	while (info->cleanTbdNum < CFG_TX_ETH_BUFFER) {
+	while (info->cleanTbdNum < CONFIG_SYS_TX_ETH_BUFFER) {
 		pUsedTbd = &info->txbd[info->usedTbdIdx];
 		if (pUsedTbd->cbd_sc & BD_ENET_TX_READY) {
 #ifdef ET_DEBUG
@@ -214,14 +214,14 @@ static int fec_send(struct eth_device *dev, volatile void *packet, int length)
 		}
 
 		/* clean this buffer descriptor */
-		if (info->usedTbdIdx == (CFG_TX_ETH_BUFFER - 1))
+		if (info->usedTbdIdx == (CONFIG_SYS_TX_ETH_BUFFER - 1))
 			pUsedTbd->cbd_sc = BD_ENET_TX_WRAP;
 		else
 			pUsedTbd->cbd_sc = 0;
 
 		/* update some indeces for a correct handling of the TBD ring */
 		info->cleanTbdNum++;
-		info->usedTbdIdx = (info->usedTbdIdx + 1) % CFG_TX_ETH_BUFFER;
+		info->usedTbdIdx = (info->usedTbdIdx + 1) % CONFIG_SYS_TX_ETH_BUFFER;
 	}
 
 	/* Check for valid length of data. */
@@ -240,7 +240,7 @@ static int fec_send(struct eth_device *dev, volatile void *packet, int length)
 	pTbd->cbd_datlen = length;
 	pTbd->cbd_bufaddr = (u32) packet;
 	pTbd->cbd_sc |= BD_ENET_TX_LAST | BD_ENET_TX_TC | BD_ENET_TX_READY;
-	info->txIdx = (info->txIdx + 1) % CFG_TX_ETH_BUFFER;
+	info->txIdx = (info->txIdx + 1) % CONFIG_SYS_TX_ETH_BUFFER;
 
 	/* Enable DMA transmit task */
 	MCD_continDma(info->txTask);
@@ -379,15 +379,15 @@ static int fec_init(struct eth_device *dev, bd_t * bd)
 	fec_halt(dev);
 
 #if defined(CONFIG_CMD_MII) || defined (CONFIG_MII) || \
-	defined (CFG_DISCOVER_PHY)
+	defined (CONFIG_SYS_DISCOVER_PHY)
 
 	mii_init();
 
 	set_fec_duplex_speed(fecp, bd, info->dup_spd);
 #else
-#ifndef CFG_DISCOVER_PHY
+#ifndef CONFIG_SYS_DISCOVER_PHY
 	set_fec_duplex_speed(fecp, bd, (FECDUPLEX << 16) | FECSPEED);
-#endif				/* ifndef CFG_DISCOVER_PHY */
+#endif				/* ifndef CONFIG_SYS_DISCOVER_PHY */
 #endif				/* CONFIG_CMD_MII || CONFIG_MII */
 
 	/* We use strictly polling mode only */
@@ -397,7 +397,7 @@ static int fec_init(struct eth_device *dev, bd_t * bd)
 	fecp->eir = 0xffffffff;
 
 	/* Set station address   */
-	if ((u32) fecp == CFG_FEC0_IOBASE) {
+	if ((u32) fecp == CONFIG_SYS_FEC0_IOBASE) {
 		fec_set_hwaddr(fecp, bd->bi_enetaddr);
 	} else {
 		fec_set_hwaddr(fecp, bd->bi_enet1addr);
@@ -421,15 +421,15 @@ static int fec_init(struct eth_device *dev, bd_t * bd)
 
 	/* Setup Ethernet Transmitter Buffer Descriptors (13.14.24.19)
 	 * Settings:    Last, Tx CRC */
-	for (i = 0; i < CFG_TX_ETH_BUFFER; i++) {
+	for (i = 0; i < CONFIG_SYS_TX_ETH_BUFFER; i++) {
 		info->txbd[i].cbd_sc = 0;
 		info->txbd[i].cbd_datlen = 0;
 		info->txbd[i].cbd_bufaddr = (uint) (&info->txbuf[0]);
 	}
-	info->txbd[CFG_TX_ETH_BUFFER - 1].cbd_sc |= BD_ENET_TX_WRAP;
+	info->txbd[CONFIG_SYS_TX_ETH_BUFFER - 1].cbd_sc |= BD_ENET_TX_WRAP;
 
 	info->usedTbdIdx = 0;
-	info->cleanTbdNum = CFG_TX_ETH_BUFFER;
+	info->cleanTbdNum = CONFIG_SYS_TX_ETH_BUFFER;
 
 	/* Set Rx FIFO alarm and granularity value */
 	fecp->rfcr = 0x0c000000;
@@ -516,14 +516,14 @@ int mcdmafec_initialize(bd_t * bis)
 {
 	struct eth_device *dev;
 	int i;
-#ifdef CFG_DMA_USE_INTSRAM
-	u32 tmp = CFG_INTSRAM + 0x2000;
+#ifdef CONFIG_SYS_DMA_USE_INTSRAM
+	u32 tmp = CONFIG_SYS_INTSRAM + 0x2000;
 #endif
 
 	for (i = 0; i < sizeof(fec_info) / sizeof(fec_info[0]); i++) {
 
 		dev =
-		    (struct eth_device *)memalign(CFG_CACHELINE_SIZE,
+		    (struct eth_device *)memalign(CONFIG_SYS_CACHELINE_SIZE,
 						  sizeof *dev);
 		if (dev == NULL)
 			hang();
@@ -539,7 +539,7 @@ int mcdmafec_initialize(bd_t * bis)
 		dev->recv = fec_recv;
 
 		/* setup Receive and Transmit buffer descriptor */
-#ifdef CFG_DMA_USE_INTSRAM
+#ifdef CONFIG_SYS_DMA_USE_INTSRAM
 		fec_info[i].rxbd = (cbd_t *)((u32)fec_info[i].rxbd + tmp);
 		tmp = (u32)fec_info[i].rxbd;
 		fec_info[i].txbd =
@@ -548,17 +548,17 @@ int mcdmafec_initialize(bd_t * bis)
 		tmp = (u32)fec_info[i].txbd;
 		fec_info[i].txbuf =
 		    (char *)((u32)fec_info[i].txbuf + tmp +
-		    (CFG_TX_ETH_BUFFER * sizeof(cbd_t)));
+		    (CONFIG_SYS_TX_ETH_BUFFER * sizeof(cbd_t)));
 		tmp = (u32)fec_info[i].txbuf;
 #else
 		fec_info[i].rxbd =
-		    (cbd_t *) memalign(CFG_CACHELINE_SIZE,
+		    (cbd_t *) memalign(CONFIG_SYS_CACHELINE_SIZE,
 				       (PKTBUFSRX * sizeof(cbd_t)));
 		fec_info[i].txbd =
-		    (cbd_t *) memalign(CFG_CACHELINE_SIZE,
-				       (CFG_TX_ETH_BUFFER * sizeof(cbd_t)));
+		    (cbd_t *) memalign(CONFIG_SYS_CACHELINE_SIZE,
+				       (CONFIG_SYS_TX_ETH_BUFFER * sizeof(cbd_t)));
 		fec_info[i].txbuf =
-		    (char *)memalign(CFG_CACHELINE_SIZE, DBUF_LENGTH);
+		    (char *)memalign(CONFIG_SYS_CACHELINE_SIZE, DBUF_LENGTH);
 #endif
 
 #ifdef ET_DEBUG
@@ -566,7 +566,7 @@ int mcdmafec_initialize(bd_t * bis)
 		       (int)fec_info[i].rxbd, (int)fec_info[i].txbd);
 #endif
 
-		fec_info[i].phy_name = (char *)memalign(CFG_CACHELINE_SIZE, 32);
+		fec_info[i].phy_name = (char *)memalign(CONFIG_SYS_CACHELINE_SIZE, 32);
 
 		eth_register(dev);
 
diff --git a/drivers/net/greth.c b/drivers/net/greth.c
index 90c533883..79bc4d9d2 100644
--- a/drivers/net/greth.c
+++ b/drivers/net/greth.c
@@ -27,6 +27,7 @@
 #include <common.h>
 #include <command.h>
 #include <net.h>
+#include <netdev.h>
 #include <malloc.h>
 #include <asm/processor.h>
 #include <ambapp.h>
diff --git a/drivers/net/inca-ip_sw.c b/drivers/net/inca-ip_sw.c
index d852a150f..492f5ce8f 100644
--- a/drivers/net/inca-ip_sw.c
+++ b/drivers/net/inca-ip_sw.c
@@ -28,6 +28,7 @@
 
 #include <malloc.h>
 #include <net.h>
+#include <netdev.h>
 #include <asm/inca-ip.h>
 #include <asm/addrspace.h>
 
@@ -199,7 +200,7 @@ int inca_switch_initialize(bd_t * bis)
 	printf("Leaving inca_switch_initialize()\n");
 #endif
 
-	return 1;
+	return 0;
 }
 
 
diff --git a/drivers/net/lan91c96.c b/drivers/net/lan91c96.c
index c23a4000a..318bdf4a1 100644
--- a/drivers/net/lan91c96.c
+++ b/drivers/net/lan91c96.c
@@ -267,7 +267,7 @@ static void smc_shutdown (void);
 
 static int poll4int (byte mask, int timeout)
 {
-	int tmo = get_timer (0) + timeout * CFG_HZ;
+	int tmo = get_timer (0) + timeout * CONFIG_SYS_HZ;
 	int is_timeout = 0;
 	word old_bank = SMC_inw (LAN91C96_BANK_SELECT);
 
diff --git a/drivers/net/macb.c b/drivers/net/macb.c
index aa39284d1..98e8c73ca 100644
--- a/drivers/net/macb.c
+++ b/drivers/net/macb.c
@@ -28,7 +28,7 @@
  * allocate our own, but we need one such buffer in case a packet
  * wraps around the DMA ring so that we have to copy it.
  *
- * Therefore, define CFG_RX_ETH_BUFFER to 1 in the board-specific
+ * Therefore, define CONFIG_SYS_RX_ETH_BUFFER to 1 in the board-specific
  * configuration header.  This way, the core allocates one RX buffer
  * and one TX buffer, each of which can hold a ethernet packet of
  * maximum size.
@@ -40,6 +40,7 @@
  */
 
 #include <net.h>
+#include <netdev.h>
 #include <malloc.h>
 
 #include <linux/mii.h>
@@ -51,11 +52,11 @@
 
 #define barrier() asm volatile("" ::: "memory")
 
-#define CFG_MACB_RX_BUFFER_SIZE		4096
-#define CFG_MACB_RX_RING_SIZE		(CFG_MACB_RX_BUFFER_SIZE / 128)
-#define CFG_MACB_TX_RING_SIZE		16
-#define CFG_MACB_TX_TIMEOUT		1000
-#define CFG_MACB_AUTONEG_TIMEOUT	5000000
+#define CONFIG_SYS_MACB_RX_BUFFER_SIZE		4096
+#define CONFIG_SYS_MACB_RX_RING_SIZE		(CONFIG_SYS_MACB_RX_BUFFER_SIZE / 128)
+#define CONFIG_SYS_MACB_TX_RING_SIZE		16
+#define CONFIG_SYS_MACB_TX_TIMEOUT		1000
+#define CONFIG_SYS_MACB_AUTONEG_TIMEOUT	5000000
 
 struct macb_dma_desc {
 	u32	addr;
@@ -177,7 +178,7 @@ static int macb_send(struct eth_device *netdev, volatile void *packet,
 
 	ctrl = length & TXBUF_FRMLEN_MASK;
 	ctrl |= TXBUF_FRAME_END;
-	if (tx_head == (CFG_MACB_TX_RING_SIZE - 1)) {
+	if (tx_head == (CONFIG_SYS_MACB_TX_RING_SIZE - 1)) {
 		ctrl |= TXBUF_WRAP;
 		macb->tx_head = 0;
 	} else
@@ -192,7 +193,7 @@ static int macb_send(struct eth_device *netdev, volatile void *packet,
 	 * I guess this is necessary because the networking core may
 	 * re-use the transmit buffer as soon as we return...
 	 */
-	for (i = 0; i <= CFG_MACB_TX_TIMEOUT; i++) {
+	for (i = 0; i <= CONFIG_SYS_MACB_TX_TIMEOUT; i++) {
 		barrier();
 		ctrl = macb->tx_ring[tx_head].ctrl;
 		if (ctrl & TXBUF_USED)
@@ -202,7 +203,7 @@ static int macb_send(struct eth_device *netdev, volatile void *packet,
 
 	dma_unmap_single(packet, length, paddr);
 
-	if (i <= CFG_MACB_TX_TIMEOUT) {
+	if (i <= CONFIG_SYS_MACB_TX_TIMEOUT) {
 		if (ctrl & TXBUF_UNDERRUN)
 			printf("%s: TX underrun\n", netdev->name);
 		if (ctrl & TXBUF_EXHAUSTED)
@@ -225,7 +226,7 @@ static void reclaim_rx_buffers(struct macb_device *macb,
 	while (i > new_tail) {
 		macb->rx_ring[i].addr &= ~RXADDR_USED;
 		i++;
-		if (i > CFG_MACB_RX_RING_SIZE)
+		if (i > CONFIG_SYS_MACB_RX_RING_SIZE)
 			i = 0;
 	}
 
@@ -264,7 +265,7 @@ static int macb_recv(struct eth_device *netdev)
 			if (wrapped) {
 				unsigned int headlen, taillen;
 
-				headlen = 128 * (CFG_MACB_RX_RING_SIZE
+				headlen = 128 * (CONFIG_SYS_MACB_RX_RING_SIZE
 						 - macb->rx_tail);
 				taillen = length - headlen;
 				memcpy((void *)NetRxPackets[0],
@@ -275,11 +276,11 @@ static int macb_recv(struct eth_device *netdev)
 			}
 
 			NetReceive(buffer, length);
-			if (++rx_tail >= CFG_MACB_RX_RING_SIZE)
+			if (++rx_tail >= CONFIG_SYS_MACB_RX_RING_SIZE)
 				rx_tail = 0;
 			reclaim_rx_buffers(macb, rx_tail);
 		} else {
-			if (++rx_tail >= CFG_MACB_RX_RING_SIZE) {
+			if (++rx_tail >= CONFIG_SYS_MACB_RX_RING_SIZE) {
 				wrapped = 1;
 				rx_tail = 0;
 			}
@@ -302,7 +303,7 @@ static void macb_phy_reset(struct macb_device *macb)
 	macb_mdio_write(macb, MII_BMCR, (BMCR_ANENABLE
 					 | BMCR_ANRESTART));
 
-	for (i = 0; i < CFG_MACB_AUTONEG_TIMEOUT / 100; i++) {
+	for (i = 0; i < CONFIG_SYS_MACB_AUTONEG_TIMEOUT / 100; i++) {
 		status = macb_mdio_read(macb, MII_BMSR);
 		if (status & BMSR_ANEGCOMPLETE)
 			break;
@@ -336,7 +337,7 @@ static int macb_phy_init(struct macb_device *macb)
 		/* Try to re-negotiate if we don't have link already. */
 		macb_phy_reset(macb);
 
-		for (i = 0; i < CFG_MACB_AUTONEG_TIMEOUT / 100; i++) {
+		for (i = 0; i < CONFIG_SYS_MACB_AUTONEG_TIMEOUT / 100; i++) {
 			status = macb_mdio_read(macb, MII_BMSR);
 			if (status & BMSR_LSTATUS)
 				break;
@@ -387,16 +388,16 @@ static int macb_init(struct eth_device *netdev, bd_t *bd)
 
 	/* initialize DMA descriptors */
 	paddr = macb->rx_buffer_dma;
-	for (i = 0; i < CFG_MACB_RX_RING_SIZE; i++) {
-		if (i == (CFG_MACB_RX_RING_SIZE - 1))
+	for (i = 0; i < CONFIG_SYS_MACB_RX_RING_SIZE; i++) {
+		if (i == (CONFIG_SYS_MACB_RX_RING_SIZE - 1))
 			paddr |= RXADDR_WRAP;
 		macb->rx_ring[i].addr = paddr;
 		macb->rx_ring[i].ctrl = 0;
 		paddr += 128;
 	}
-	for (i = 0; i < CFG_MACB_TX_RING_SIZE; i++) {
+	for (i = 0; i < CONFIG_SYS_MACB_TX_RING_SIZE; i++) {
 		macb->tx_ring[i].addr = 0;
-		if (i == (CFG_MACB_TX_RING_SIZE - 1))
+		if (i == (CONFIG_SYS_MACB_TX_RING_SIZE - 1))
 			macb->tx_ring[i].ctrl = TXBUF_USED | TXBUF_WRAP;
 		else
 			macb->tx_ring[i].ctrl = TXBUF_USED;
@@ -472,12 +473,12 @@ int macb_eth_initialize(int id, void *regs, unsigned int phy_addr)
 
 	netdev = &macb->netdev;
 
-	macb->rx_buffer = dma_alloc_coherent(CFG_MACB_RX_BUFFER_SIZE,
+	macb->rx_buffer = dma_alloc_coherent(CONFIG_SYS_MACB_RX_BUFFER_SIZE,
 					     &macb->rx_buffer_dma);
-	macb->rx_ring = dma_alloc_coherent(CFG_MACB_RX_RING_SIZE
+	macb->rx_ring = dma_alloc_coherent(CONFIG_SYS_MACB_RX_RING_SIZE
 					   * sizeof(struct macb_dma_desc),
 					   &macb->rx_ring_dma);
-	macb->tx_ring = dma_alloc_coherent(CFG_MACB_TX_RING_SIZE
+	macb->tx_ring = dma_alloc_coherent(CONFIG_SYS_MACB_TX_RING_SIZE
 					   * sizeof(struct macb_dma_desc),
 					   &macb->tx_ring_dma);
 
diff --git a/drivers/net/mcffec.c b/drivers/net/mcffec.c
index 50d6508fb..18240a81a 100644
--- a/drivers/net/mcffec.c
+++ b/drivers/net/mcffec.c
@@ -27,13 +27,14 @@
 #include <common.h>
 #include <malloc.h>
 
-#include <asm/fec.h>
-#include <asm/immap.h>
-
 #include <command.h>
 #include <net.h>
+#include <netdev.h>
 #include <miiphy.h>
 
+#include <asm/fec.h>
+#include <asm/immap.h>
+
 #undef	ET_DEBUG
 #undef	MII_DEBUG
 
@@ -50,12 +51,12 @@
 DECLARE_GLOBAL_DATA_PTR;
 
 struct fec_info_s fec_info[] = {
-#ifdef CFG_FEC0_IOBASE
+#ifdef CONFIG_SYS_FEC0_IOBASE
 	{
 	 0,			/* index */
-	 CFG_FEC0_IOBASE,	/* io base */
-	 CFG_FEC0_PINMUX,	/* gpio pin muxing */
-	 CFG_FEC0_MIIBASE,	/* mii base */
+	 CONFIG_SYS_FEC0_IOBASE,	/* io base */
+	 CONFIG_SYS_FEC0_PINMUX,	/* gpio pin muxing */
+	 CONFIG_SYS_FEC0_MIIBASE,	/* mii base */
 	 -1,			/* phy_addr */
 	 0,			/* duplex and speed */
 	 0,			/* phy name */
@@ -69,17 +70,17 @@ struct fec_info_s fec_info[] = {
 	 (struct fec_info_s *)-1,
 	 },
 #endif
-#ifdef CFG_FEC1_IOBASE
+#ifdef CONFIG_SYS_FEC1_IOBASE
 	{
 	 1,			/* index */
-	 CFG_FEC1_IOBASE,	/* io base */
-	 CFG_FEC1_PINMUX,	/* gpio pin muxing */
-	 CFG_FEC1_MIIBASE,	/* mii base */
+	 CONFIG_SYS_FEC1_IOBASE,	/* io base */
+	 CONFIG_SYS_FEC1_PINMUX,	/* gpio pin muxing */
+	 CONFIG_SYS_FEC1_MIIBASE,	/* mii base */
 	 -1,			/* phy_addr */
 	 0,			/* duplex and speed */
 	 0,			/* phy name */
 	 0,			/* phy name init */
-#ifdef CFG_FEC_BUF_USE_SRAM
+#ifdef CONFIG_SYS_FEC_BUF_USE_SRAM
 	 (cbd_t *)DBUF_LENGTH,	/* RX BD */
 #else
 	 0,			/* RX BD */
@@ -100,18 +101,6 @@ int fec_init(struct eth_device *dev, bd_t * bd);
 void fec_halt(struct eth_device *dev);
 void fec_reset(struct eth_device *dev);
 
-extern int fecpin_setclear(struct eth_device *dev, int setclear);
-
-#ifdef CFG_DISCOVER_PHY
-extern void __mii_init(void);
-extern uint mii_send(uint mii_cmd);
-extern int mii_discover_phy(struct eth_device *dev);
-extern int mcffec_miiphy_read(char *devname, unsigned char addr,
-			      unsigned char reg, unsigned short *value);
-extern int mcffec_miiphy_write(char *devname, unsigned char addr,
-			       unsigned char reg, unsigned short value);
-#endif
-
 void setFecDuplexSpeed(volatile fec_t * fecp, bd_t * bd, int dup_spd)
 {
 	if ((dup_spd >> 16) == FULL) {
@@ -174,7 +163,7 @@ int fec_send(struct eth_device *dev, volatile void *packet, int length)
 	/* Activate transmit Buffer Descriptor polling */
 	fecp->tdar = 0x01000000;	/* Descriptor polling active    */
 
-#ifndef CFG_FEC_BUF_USE_SRAM
+#ifndef CONFIG_SYS_FEC_BUF_USE_SRAM
 	/*
 	 * FEC unable to initial transmit data packet.
 	 * A nop will ensure the descriptor polling active completed.
@@ -186,7 +175,7 @@ int fec_send(struct eth_device *dev, volatile void *packet, int length)
 
 #endif
 
-#ifdef CFG_UNIFY_CACHE
+#ifdef CONFIG_SYS_UNIFY_CACHE
 	icache_invalid();
 #endif
 
@@ -221,9 +210,9 @@ int fec_recv(struct eth_device *dev)
 	int length;
 
 	for (;;) {
-#ifndef CFG_FEC_BUF_USE_SRAM
+#ifndef CONFIG_SYS_FEC_BUF_USE_SRAM
 #endif
-#ifdef CFG_UNIFY_CACHE
+#ifdef CONFIG_SYS_UNIFY_CACHE
 		icache_invalid();
 #endif
 		/* section 16.9.23.2 */
@@ -434,15 +423,15 @@ int fec_init(struct eth_device *dev, bd_t * bd)
 	fec_reset(dev);
 
 #if defined(CONFIG_CMD_MII) || defined (CONFIG_MII) || \
-	defined (CFG_DISCOVER_PHY)
+	defined (CONFIG_SYS_DISCOVER_PHY)
 
 	mii_init();
 
 	setFecDuplexSpeed(fecp, bd, info->dup_spd);
 #else
-#ifndef CFG_DISCOVER_PHY
+#ifndef CONFIG_SYS_DISCOVER_PHY
 	setFecDuplexSpeed(fecp, bd, (FECDUPLEX << 16) | FECSPEED);
-#endif				/* ifndef CFG_DISCOVER_PHY */
+#endif				/* ifndef CONFIG_SYS_DISCOVER_PHY */
 #endif				/* CONFIG_CMD_MII || CONFIG_MII */
 
 	/* We use strictly polling mode only */
@@ -452,9 +441,9 @@ int fec_init(struct eth_device *dev, bd_t * bd)
 	fecp->eir = 0xffffffff;
 
 	/* Set station address   */
-	if ((u32) fecp == CFG_FEC0_IOBASE) {
-#ifdef CFG_FEC1_IOBASE
-		volatile fec_t *fecp1 = (fec_t *) (CFG_FEC1_IOBASE);
+	if ((u32) fecp == CONFIG_SYS_FEC0_IOBASE) {
+#ifdef CONFIG_SYS_FEC1_IOBASE
+		volatile fec_t *fecp1 = (fec_t *) (CONFIG_SYS_FEC1_IOBASE);
 		ea = &bd->bi_enet1addr[0];
 		fecp1->palr =
 		    (ea[0] << 24) | (ea[1] << 16) | (ea[2] << 8) | (ea[3]);
@@ -465,14 +454,14 @@ int fec_init(struct eth_device *dev, bd_t * bd)
 		    (ea[0] << 24) | (ea[1] << 16) | (ea[2] << 8) | (ea[3]);
 		fecp->paur = (ea[4] << 24) | (ea[5] << 16);
 	} else {
-#ifdef CFG_FEC0_IOBASE
-		volatile fec_t *fecp0 = (fec_t *) (CFG_FEC0_IOBASE);
+#ifdef CONFIG_SYS_FEC0_IOBASE
+		volatile fec_t *fecp0 = (fec_t *) (CONFIG_SYS_FEC0_IOBASE);
 		ea = &bd->bi_enetaddr[0];
 		fecp0->palr =
 		    (ea[0] << 24) | (ea[1] << 16) | (ea[2] << 8) | (ea[3]);
 		fecp0->paur = (ea[4] << 24) | (ea[5] << 16);
 #endif
-#ifdef CFG_FEC1_IOBASE
+#ifdef CONFIG_SYS_FEC1_IOBASE
 		ea = &bd->bi_enet1addr[0];
 		fecp->palr =
 		    (ea[0] << 24) | (ea[1] << 16) | (ea[2] << 8) | (ea[3]);
@@ -567,14 +556,14 @@ int mcffec_initialize(bd_t * bis)
 {
 	struct eth_device *dev;
 	int i;
-#ifdef CFG_FEC_BUF_USE_SRAM
-	u32 tmp = CFG_INIT_RAM_ADDR + 0x1000;
+#ifdef CONFIG_SYS_FEC_BUF_USE_SRAM
+	u32 tmp = CONFIG_SYS_INIT_RAM_ADDR + 0x1000;
 #endif
 
 	for (i = 0; i < sizeof(fec_info) / sizeof(fec_info[0]); i++) {
 
 		dev =
-		    (struct eth_device *)memalign(CFG_CACHELINE_SIZE,
+		    (struct eth_device *)memalign(CONFIG_SYS_CACHELINE_SIZE,
 						  sizeof *dev);
 		if (dev == NULL)
 			hang();
@@ -590,7 +579,7 @@ int mcffec_initialize(bd_t * bis)
 		dev->recv = fec_recv;
 
 		/* setup Receive and Transmit buffer descriptor */
-#ifdef CFG_FEC_BUF_USE_SRAM
+#ifdef CONFIG_SYS_FEC_BUF_USE_SRAM
 		fec_info[i].rxbd = (cbd_t *)((u32)fec_info[i].rxbd + tmp);
 		tmp = (u32)fec_info[i].rxbd;
 		fec_info[i].txbd =
@@ -599,17 +588,17 @@ int mcffec_initialize(bd_t * bis)
 		tmp = (u32)fec_info[i].txbd;
 		fec_info[i].txbuf =
 		    (char *)((u32)fec_info[i].txbuf + tmp +
-		    (CFG_TX_ETH_BUFFER * sizeof(cbd_t)));
+		    (CONFIG_SYS_TX_ETH_BUFFER * sizeof(cbd_t)));
 		tmp = (u32)fec_info[i].txbuf;
 #else
 		fec_info[i].rxbd =
-		    (cbd_t *) memalign(CFG_CACHELINE_SIZE,
+		    (cbd_t *) memalign(CONFIG_SYS_CACHELINE_SIZE,
 				       (PKTBUFSRX * sizeof(cbd_t)));
 		fec_info[i].txbd =
-		    (cbd_t *) memalign(CFG_CACHELINE_SIZE,
+		    (cbd_t *) memalign(CONFIG_SYS_CACHELINE_SIZE,
 				       (TX_BUF_CNT * sizeof(cbd_t)));
 		fec_info[i].txbuf =
-		    (char *)memalign(CFG_CACHELINE_SIZE, DBUF_LENGTH);
+		    (char *)memalign(CONFIG_SYS_CACHELINE_SIZE, DBUF_LENGTH);
 #endif
 
 #ifdef ET_DEBUG
@@ -617,7 +606,7 @@ int mcffec_initialize(bd_t * bis)
 		       (int)fec_info[i].rxbd, (int)fec_info[i].txbd);
 #endif
 
-		fec_info[i].phy_name = (char *)memalign(CFG_CACHELINE_SIZE, 32);
+		fec_info[i].phy_name = (char *)memalign(CONFIG_SYS_CACHELINE_SIZE, 32);
 
 		eth_register(dev);
 
diff --git a/board/freescale/m5271evb/mii.c b/drivers/net/mcfmii.c
index 78a7028bc..2b733c66e 100644
--- a/board/freescale/m5271evb/mii.c
+++ b/drivers/net/mcfmii.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
+ * Copyright (C) 2004-2008 Freescale Semiconductor, Inc.
  * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
  *
  * See file CREDITS for list of people who contributed to this
@@ -22,11 +22,16 @@
  */
 
 #include <common.h>
-#include <asm/fec.h>
-#include <asm/immap.h>
-
 #include <config.h>
 #include <net.h>
+#include <netdev.h>
+
+#ifdef CONFIG_MCF547x_8x
+#include <asm/fsl_mcdmafec.h>
+#else
+#include <asm/fec.h>
+#endif
+#include <asm/immap.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -34,73 +39,81 @@ DECLARE_GLOBAL_DATA_PTR;
 #undef MII_DEBUG
 #undef ET_DEBUG
 
-int fecpin_setclear(struct eth_device *dev, int setclear)
-{
-	if (setclear) {
-		/* Enable Ethernet pins */
-		mbar_writeByte(MCF_GPIO_PAR_FECI2C, CFG_FECI2C);
-	} else {
-	}
+/*extern int fecpin_setclear(struct eth_device *dev, int setclear);*/
 
-	return 0;
-}
-
-#if defined(CFG_DISCOVER_PHY) || defined(CONFIG_CMD_MII)
+#if defined(CONFIG_SYS_DISCOVER_PHY) || defined(CONFIG_CMD_MII)
 #include <miiphy.h>
 
 /* Make MII read/write commands for the FEC. */
-#define mk_mii_read(ADDR, REG)	(0x60020000 | ((ADDR << 23) | (REG & 0x1f) << 18))
-
-#define mk_mii_write(ADDR, REG, VAL)	(0x50020000 | ((ADDR << 23) | (REG & 0x1f) << 18) | (VAL & 0xffff))
-
-/* PHY identification */
-#define PHY_ID_LXT970		0x78100000	/* LXT970 */
-#define PHY_ID_LXT971		0x001378e0	/* LXT971 and 972 */
-#define PHY_ID_82555		0x02a80150	/* Intel 82555 */
-#define PHY_ID_QS6612		0x01814400	/* QS6612 */
-#define PHY_ID_AMD79C784	0x00225610	/* AMD 79C784 */
-#define PHY_ID_LSI80225		0x0016f870	/* LSI 80225 */
-#define PHY_ID_LSI80225B	0x0016f880	/* LSI 80225/B */
-#define PHY_ID_DP83848VV	0x20005C90	/* National 83848 */
-#define PHY_ID_DP83849		0x20005CA2	/* National 82849 */
-#define PHY_ID_KS8721BL		0x00221619	/* Micrel KS8721BL/SL */
-
-#define STR_ID_LXT970		"LXT970"
-#define STR_ID_LXT971		"LXT971"
-#define STR_ID_82555		"Intel82555"
-#define STR_ID_QS6612		"QS6612"
-#define STR_ID_AMD79C784	"AMD79C784"
-#define STR_ID_LSI80225		"LSI80225"
-#define STR_ID_LSI80225B	"LSI80225/B"
-#define STR_ID_DP83848VV	"N83848"
-#define STR_ID_DP83849		"N83849"
-#define STR_ID_KS8721BL		"KS8721BL"
-
-/****************************************************************************
+#define mk_mii_read(ADDR, REG)		(0x60020000 | ((ADDR << 23) | \
+					 (REG & 0x1f) << 18))
+#define mk_mii_write(ADDR, REG, VAL)	(0x50020000 | ((ADDR << 23) | \
+					 (REG & 0x1f) << 18) | (VAL & 0xffff))
+
+#ifndef CONFIG_SYS_UNSPEC_PHYID
+#	define CONFIG_SYS_UNSPEC_PHYID		0
+#endif
+#ifndef CONFIG_SYS_UNSPEC_STRID
+#	define CONFIG_SYS_UNSPEC_STRID		0
+#endif
+
+#ifdef CONFIG_MCF547x_8x
+typedef struct fec_info_dma FEC_INFO_T;
+#define FEC_T fecdma_t
+#else
+typedef struct fec_info_s FEC_INFO_T;
+#define FEC_T fec_t
+#endif
+
+typedef struct phy_info_struct {
+	u32 phyid;
+	char *strid;
+} phy_info_t;
+
+phy_info_t phyinfo[] = {
+	{0x0022561B, "AMD79C784VC"},	/* AMD 79C784VC */
+	{0x00406322, "BCM5222"},	/* Broadcom 5222 */
+	{0x02a80150, "Intel82555"},	/* Intel 82555 */
+	{0x0016f870, "LSI80225"},	/* LSI 80225 */
+	{0x0016f880, "LSI80225/B"},	/* LSI 80225/B */
+	{0x78100000, "LXT970"},		/* LXT970 */
+	{0x001378e0, "LXT971"},		/* LXT971 and 972 */
+	{0x00221619, "KS8721BL"},	/* Micrel KS8721BL/SL */
+	{0x00221512, "KSZ8041NL"},	/* Micrel KSZ8041NL */
+	{0x20005CE1, "N83640"},		/* National 83640 */
+	{0x20005C90, "N83848"},		/* National 83848 */
+	{0x20005CA2, "N83849"},		/* National 83849 */
+	{0x01814400, "QS6612"},		/* QS6612 */
+#if defined(CONFIG_SYS_UNSPEC_PHYID) && defined(CONFIG_SYS_UNSPEC_STRID)
+	{CONFIG_SYS_UNSPEC_PHYID, CONFIG_SYS_UNSPEC_STRID},
+#endif
+	{0, 0}
+};
+
+/*
  * mii_init -- Initialize the MII for MII command without ethernet
  * This function is a subset of eth_init
- ****************************************************************************
  */
-void mii_reset(struct fec_info_s *info)
+void mii_reset(FEC_INFO_T *info)
 {
-	volatile fec_t *fecp = (fec_t *) (info->miibase);
+	volatile FEC_T *fecp = (FEC_T *) (info->miibase);
 	int i;
 
 	fecp->ecr = FEC_ECR_RESET;
+
 	for (i = 0; (fecp->ecr & FEC_ECR_RESET) && (i < FEC_RESET_DELAY); ++i) {
 		udelay(1);
 	}
-	if (i == FEC_RESET_DELAY) {
+	if (i == FEC_RESET_DELAY)
 		printf("FEC_RESET_DELAY timeout\n");
-	}
 }
 
 /* send command to phy using mii, wait for result */
 uint mii_send(uint mii_cmd)
 {
-	struct fec_info_s *info;
+	FEC_INFO_T *info;
+	volatile FEC_T *ep;
 	struct eth_device *dev;
-	volatile fec_t *ep;
 	uint mii_reply;
 	int j = 0;
 
@@ -108,7 +121,7 @@ uint mii_send(uint mii_cmd)
 	dev = eth_get_dev();
 	info = dev->priv;
 
-	ep = (fec_t *) info->miibase;
+	ep = (FEC_T *) info->miibase;
 
 	ep->mmfr = mii_cmd;	/* command to phy */
 
@@ -131,15 +144,16 @@ uint mii_send(uint mii_cmd)
 
 	return (mii_reply & 0xffff);	/* data read from phy */
 }
-#endif				/* CFG_DISCOVER_PHY || CONFIG_CMD_MII */
+#endif				/* CONFIG_SYS_DISCOVER_PHY || (CONFIG_MII) */
 
-#if defined(CFG_DISCOVER_PHY)
+#if defined(CONFIG_SYS_DISCOVER_PHY)
 int mii_discover_phy(struct eth_device *dev)
 {
 #define MAX_PHY_PASSES 11
-	struct fec_info_s *info = dev->priv;
+	FEC_INFO_T *info = dev->priv;
 	int phyaddr, pass;
 	uint phyno, phytype;
+	int i, found = 0;
 
 	if (info->phyname_init)
 		return info->phy_addr;
@@ -167,45 +181,49 @@ int mii_discover_phy(struct eth_device *dev)
 				phytype |=
 				    mii_send(mk_mii_read(phyno, PHY_PHYIDR2));
 
-				switch (phytype & 0xffffffff) {
-				case PHY_ID_KS8721BL:
-					strcpy(info->phy_name,
-					       STR_ID_KS8721BL);
-					info->phyname_init = 1;
-					break;
-				default:
-					strcpy(info->phy_name, "unknown");
-					info->phyname_init = 1;
-					break;
+#ifdef ET_DEBUG
+				printf("PHY @ 0x%x pass %d\n", phyno, pass);
+#endif
+
+				for (i = 0; i < (sizeof(phyinfo) / sizeof(phy_info_t)); i++) {
+					if (phyinfo[i].phyid == phytype) {
+#ifdef ET_DEBUG
+						printf("phyid %x - %s\n",
+						       phyinfo[i].phyid,
+						       phyinfo[i].strid);
+#endif
+						strcpy(info->phy_name, phyinfo[i].strid);
+						info->phyname_init = 1;
+						found = 1;
+						break;
+					}
 				}
 
+				if (!found) {
 #ifdef ET_DEBUG
-				printf("PHY @ 0x%x pass %d type ", phyno, pass);
-				switch (phytype & 0xffffffff) {
-				case PHY_ID_KS8721BL:
-					printf(STR_ID_KS8721BL);
-					break;
-				default:
 					printf("0x%08x\n", phytype);
+#endif
+					strcpy(info->phy_name, "unknown");
+					info->phyname_init = 1;
 					break;
 				}
-#endif
 			}
 		}
 	}
+
 	if (phyaddr < 0)
 		printf("No PHY device found.\n");
 
 	return phyaddr;
 }
-#endif				/* CFG_DISCOVER_PHY */
+#endif				/* CONFIG_SYS_DISCOVER_PHY */
 
 void mii_init(void) __attribute__((weak,alias("__mii_init")));
 
 void __mii_init(void)
 {
-	volatile fec_t *fecp;
-	struct fec_info_s *info;
+	FEC_INFO_T *info;
+	volatile FEC_T *fecp;
 	struct eth_device *dev;
 	int miispd = 0, i = 0;
 	u16 autoneg = 0;
@@ -214,7 +232,7 @@ void __mii_init(void)
 	dev = eth_get_dev();
 	info = dev->priv;
 
-	fecp = (fec_t *) info->miibase;
+	fecp = (FEC_T *) info->miibase;
 
 	fecpin_setclear(dev, 1);
 
@@ -252,7 +270,7 @@ void __mii_init(void)
 	info->dup_spd |= miiphy_speed(dev->name, info->phy_addr);
 }
 
-/*****************************************************************************
+/*
  * Read and write a MII PHY register, routines used by MII Utilities
  *
  * FIXME: These routines are expected to return 0 on success, but mii_send
@@ -261,7 +279,7 @@ void __mii_init(void)
  *	  For now always return 0.
  * FIXME: These routines only work after calling eth_init() at least once!
  *	  Otherwise they hang in mii_send() !!! Sorry!
- *****************************************************************************/
+ */
 
 int mcffec_miiphy_read(char *devname, unsigned char addr, unsigned char reg,
 		       unsigned short *value)
diff --git a/drivers/net/mpc512x_fec.c b/drivers/net/mpc512x_fec.c
index 7caeeda65..7078c4ef7 100644
--- a/drivers/net/mpc512x_fec.c
+++ b/drivers/net/mpc512x_fec.c
@@ -10,6 +10,7 @@
 #include <mpc512x.h>
 #include <malloc.h>
 #include <net.h>
+#include <netdev.h>
 #include <miiphy.h>
 #include "mpc512x_fec.h"
 
@@ -363,7 +364,7 @@ int mpc512x_fec_init_phy (struct eth_device *dev, bd_t * bis)
 			/*
 			 * Wait for AN completion
 			 */
-			timeout = 50000;
+			timeout = 2500;
 			do {
 				udelay (1000);
 
diff --git a/drivers/net/mpc5xxx_fec.c b/drivers/net/mpc5xxx_fec.c
index 3d3eb8bae..f8618b172 100644
--- a/drivers/net/mpc5xxx_fec.c
+++ b/drivers/net/mpc5xxx_fec.c
@@ -11,6 +11,7 @@
 #include <mpc5xxx_sdma.h>
 #include <malloc.h>
 #include <net.h>
+#include <netdev.h>
 #include <miiphy.h>
 #include "mpc5xxx_fec.h"
 
diff --git a/drivers/net/natsemi.c b/drivers/net/natsemi.c
index 4aee0481d..ce12c3b62 100644
--- a/drivers/net/natsemi.c
+++ b/drivers/net/natsemi.c
@@ -53,6 +53,7 @@
 #include <common.h>
 #include <malloc.h>
 #include <net.h>
+#include <netdev.h>
 #include <asm/io.h>
 #include <pci.h>
 
@@ -408,7 +409,7 @@ natsemi_initialize(bd_t * bis)
    The EEPROM code is for common 93c06/46 EEPROMs w/ 6bit addresses.  */
 
 /* Delay between EEPROM clock transitions.
-   No extra delay is needed with 33Mhz PCI, but future 66Mhz
+   No extra delay is needed with 33MHz PCI, but future 66MHz
    access may need a delay. */
 #define eeprom_delay(ee_addr)	INL(dev, ee_addr)
 
diff --git a/drivers/net/ne2000.c b/drivers/net/ne2000.c
index ec92485cb..ab5eec772 100644
--- a/drivers/net/ne2000.c
+++ b/drivers/net/ne2000.c
@@ -74,600 +74,11 @@ Add SNMP
 
 #include <common.h>
 #include <command.h>
-#include <net.h>
-#include <malloc.h>
-
-#define mdelay(n)	udelay((n)*1000)
-/* forward definition of function used for the uboot interface */
-void uboot_push_packet_len(int len);
-void uboot_push_tx_done(int key, int val);
-
-/*
- * Debugging details
- *
- * Set to perms of:
- * 0 disables all debug output
- * 1 for process debug output
- * 2 for added data IO output: get_reg, put_reg
- * 4 for packet allocation/free output
- * 8 for only startup status, so we can tell we're installed OK
- */
-#if 0
-#define DEBUG 0xf
-#else
-#define DEBUG 0
-#endif
-
-#if DEBUG & 1
-#define DEBUG_FUNCTION() do { printf("%s\n", __FUNCTION__); } while (0)
-#define DEBUG_LINE() do { printf("%d\n", __LINE__); } while (0)
-#define PRINTK(args...) printf(args)
-#else
-#define DEBUG_FUNCTION() do {} while(0)
-#define DEBUG_LINE() do {} while(0)
-#define PRINTK(args...)
-#endif
 
 /* NE2000 base header file */
 #include "ne2000_base.h"
 
-#if defined(CONFIG_DRIVER_AX88796L)
-/* AX88796L support */
-#include "ax88796.h"
-#else
-/* Basic NE2000 chip support */
-#include "ne2000.h"
-#endif
-
-static dp83902a_priv_data_t nic; /* just one instance of the card supported */
-
-static bool
-dp83902a_init(void)
-{
-	dp83902a_priv_data_t *dp = &nic;
-	u8* base;
-#if defined(NE2000_BASIC_INIT)
-	int i;
-#endif
-
-	DEBUG_FUNCTION();
-
-	base = dp->base;
-	if (!base)
-		return false;	/* No device found */
-
-	DEBUG_LINE();
-
-#if defined(NE2000_BASIC_INIT)
-	/* AX88796L doesn't need */
-	/* Prepare ESA */
-	DP_OUT(base, DP_CR, DP_CR_NODMA | DP_CR_PAGE1);	/* Select page 1 */
-	/* Use the address from the serial EEPROM */
-	for (i = 0; i < 6; i++)
-		DP_IN(base, DP_P1_PAR0+i, dp->esa[i]);
-	DP_OUT(base, DP_CR, DP_CR_NODMA | DP_CR_PAGE0);	/* Select page 0 */
-
-	printf("NE2000 - %s ESA: %02x:%02x:%02x:%02x:%02x:%02x\n",
-		"eeprom",
-		dp->esa[0],
-		dp->esa[1],
-		dp->esa[2],
-		dp->esa[3],
-		dp->esa[4],
-		dp->esa[5] );
-
-#endif	/* NE2000_BASIC_INIT */
-	return true;
-}
-
-static void
-dp83902a_stop(void)
-{
-	dp83902a_priv_data_t *dp = &nic;
-	u8 *base = dp->base;
-
-	DEBUG_FUNCTION();
-
-	DP_OUT(base, DP_CR, DP_CR_PAGE0 | DP_CR_NODMA | DP_CR_STOP);	/* Brutal */
-	DP_OUT(base, DP_ISR, 0xFF);		/* Clear any pending interrupts */
-	DP_OUT(base, DP_IMR, 0x00);		/* Disable all interrupts */
-
-	dp->running = false;
-}
-
-/*
- * This function is called to "start up" the interface. It may be called
- * multiple times, even when the hardware is already running. It will be
- * called whenever something "hardware oriented" changes and should leave
- * the hardware ready to send/receive packets.
- */
-static void
-dp83902a_start(u8 * enaddr)
-{
-	dp83902a_priv_data_t *dp = &nic;
-	u8 *base = dp->base;
-	int i;
-
-	DEBUG_FUNCTION();
-
-	DP_OUT(base, DP_CR, DP_CR_PAGE0 | DP_CR_NODMA | DP_CR_STOP); /* Brutal */
-	DP_OUT(base, DP_DCR, DP_DCR_INIT);
-	DP_OUT(base, DP_RBCH, 0);		/* Remote byte count */
-	DP_OUT(base, DP_RBCL, 0);
-	DP_OUT(base, DP_RCR, DP_RCR_MON);	/* Accept no packets */
-	DP_OUT(base, DP_TCR, DP_TCR_LOCAL);	/* Transmitter [virtually] off */
-	DP_OUT(base, DP_TPSR, dp->tx_buf1);	/* Transmitter start page */
-	dp->tx1 = dp->tx2 = 0;
-	dp->tx_next = dp->tx_buf1;
-	dp->tx_started = false;
-	dp->running = true;
-	DP_OUT(base, DP_PSTART, dp->rx_buf_start); /* Receive ring start page */
-	DP_OUT(base, DP_BNDRY, dp->rx_buf_end - 1); /* Receive ring boundary */
-	DP_OUT(base, DP_PSTOP, dp->rx_buf_end);	/* Receive ring end page */
-	dp->rx_next = dp->rx_buf_start - 1;
-	dp->running = true;
-	DP_OUT(base, DP_ISR, 0xFF);		/* Clear any pending interrupts */
-	DP_OUT(base, DP_IMR, DP_IMR_All);	/* Enable all interrupts */
-	DP_OUT(base, DP_CR, DP_CR_NODMA | DP_CR_PAGE1 | DP_CR_STOP);	/* Select page 1 */
-	DP_OUT(base, DP_P1_CURP, dp->rx_buf_start);	/* Current page - next free page for Rx */
-	dp->running = true;
-	for (i = 0; i < ETHER_ADDR_LEN; i++) {
-		/* FIXME */
-		/*((vu_short*)( base + ((DP_P1_PAR0 + i) * 2) +
-		 * 0x1400)) = enaddr[i];*/
-		DP_OUT(base, DP_P1_PAR0+i, enaddr[i]);
-	}
-	/* Enable and start device */
-	DP_OUT(base, DP_CR, DP_CR_PAGE0 | DP_CR_NODMA | DP_CR_START);
-	DP_OUT(base, DP_TCR, DP_TCR_NORMAL); /* Normal transmit operations */
-	DP_OUT(base, DP_RCR, DP_RCR_AB); /* Accept broadcast, no errors, no multicast */
-	dp->running = true;
-}
-
-/*
- * This routine is called to start the transmitter. It is split out from the
- * data handling routine so it may be called either when data becomes first
- * available or when an Tx interrupt occurs
- */
-
-static void
-dp83902a_start_xmit(int start_page, int len)
-{
-	dp83902a_priv_data_t *dp = (dp83902a_priv_data_t *) &nic;
-	u8 *base = dp->base;
-
-	DEBUG_FUNCTION();
-
-#if DEBUG & 1
-	printf("Tx pkt %d len %d\n", start_page, len);
-	if (dp->tx_started)
-		printf("TX already started?!?\n");
-#endif
-
-	DP_OUT(base, DP_ISR, (DP_ISR_TxP | DP_ISR_TxE));
-	DP_OUT(base, DP_CR, DP_CR_PAGE0 | DP_CR_NODMA | DP_CR_START);
-	DP_OUT(base, DP_TBCL, len & 0xFF);
-	DP_OUT(base, DP_TBCH, len >> 8);
-	DP_OUT(base, DP_TPSR, start_page);
-	DP_OUT(base, DP_CR, DP_CR_NODMA | DP_CR_TXPKT | DP_CR_START);
-
-	dp->tx_started = true;
-}
-
-/*
- * This routine is called to send data to the hardware. It is known a-priori
- * that there is free buffer space (dp->tx_next).
- */
-static void
-dp83902a_send(u8 *data, int total_len, u32 key)
-{
-	struct dp83902a_priv_data *dp = (struct dp83902a_priv_data *) &nic;
-	u8 *base = dp->base;
-	int len, start_page, pkt_len, i, isr;
-#if DEBUG & 4
-	int dx;
-#endif
-
-	DEBUG_FUNCTION();
-
-	len = pkt_len = total_len;
-	if (pkt_len < IEEE_8023_MIN_FRAME)
-		pkt_len = IEEE_8023_MIN_FRAME;
-
-	start_page = dp->tx_next;
-	if (dp->tx_next == dp->tx_buf1) {
-		dp->tx1 = start_page;
-		dp->tx1_len = pkt_len;
-		dp->tx1_key = key;
-		dp->tx_next = dp->tx_buf2;
-	} else {
-		dp->tx2 = start_page;
-		dp->tx2_len = pkt_len;
-		dp->tx2_key = key;
-		dp->tx_next = dp->tx_buf1;
-	}
-
-#if DEBUG & 5
-	printf("TX prep page %d len %d\n", start_page, pkt_len);
-#endif
-
-	DP_OUT(base, DP_ISR, DP_ISR_RDC);	/* Clear end of DMA */
-	{
-		/*
-		 * Dummy read. The manual sez something slightly different,
-		 * but the code is extended a bit to do what Hitachi's monitor
-		 * does (i.e., also read data).
-		 */
-
-		u16 tmp;
-		int len = 1;
-
-		DP_OUT(base, DP_RSAL, 0x100 - len);
-		DP_OUT(base, DP_RSAH, (start_page - 1) & 0xff);
-		DP_OUT(base, DP_RBCL, len);
-		DP_OUT(base, DP_RBCH, 0);
-		DP_OUT(base, DP_CR, DP_CR_PAGE0 | DP_CR_RDMA | DP_CR_START);
-		DP_IN_DATA(dp->data, tmp);
-	}
-
-#ifdef CYGHWR_NS_DP83902A_PLF_BROKEN_TX_DMA
-	/*
-	 * Stall for a bit before continuing to work around random data
-	 * corruption problems on some platforms.
-	 */
-	CYGACC_CALL_IF_DELAY_US(1);
-#endif
-
-	/* Send data to device buffer(s) */
-	DP_OUT(base, DP_RSAL, 0);
-	DP_OUT(base, DP_RSAH, start_page);
-	DP_OUT(base, DP_RBCL, pkt_len & 0xFF);
-	DP_OUT(base, DP_RBCH, pkt_len >> 8);
-	DP_OUT(base, DP_CR, DP_CR_WDMA | DP_CR_START);
-
-	/* Put data into buffer */
-#if DEBUG & 4
-	printf(" sg buf %08lx len %08x\n ", (u32)data, len);
-	dx = 0;
-#endif
-	while (len > 0) {
-#if DEBUG & 4
-		printf(" %02x", *data);
-		if (0 == (++dx % 16)) printf("\n ");
-#endif
-
-		DP_OUT_DATA(dp->data, *data++);
-		len--;
-	}
-#if DEBUG & 4
-	printf("\n");
-#endif
-	if (total_len < pkt_len) {
-#if DEBUG & 4
-		printf("  + %d bytes of padding\n", pkt_len - total_len);
-#endif
-		/* Padding to 802.3 length was required */
-		for (i = total_len; i < pkt_len;) {
-			i++;
-			DP_OUT_DATA(dp->data, 0);
-		}
-	}
-
-#ifdef CYGHWR_NS_DP83902A_PLF_BROKEN_TX_DMA
-	/*
-	 * After last data write, delay for a bit before accessing the
-	 * device again, or we may get random data corruption in the last
-	 * datum (on some platforms).
-	 */
-	CYGACC_CALL_IF_DELAY_US(1);
-#endif
-
-	/* Wait for DMA to complete */
-	do {
-		DP_IN(base, DP_ISR, isr);
-	} while ((isr & DP_ISR_RDC) == 0);
-
-	/* Then disable DMA */
-	DP_OUT(base, DP_CR, DP_CR_PAGE0 | DP_CR_NODMA | DP_CR_START);
-
-	/* Start transmit if not already going */
-	if (!dp->tx_started) {
-		if (start_page == dp->tx1) {
-			dp->tx_int = 1; /* Expecting interrupt from BUF1 */
-		} else {
-			dp->tx_int = 2; /* Expecting interrupt from BUF2 */
-		}
-		dp83902a_start_xmit(start_page, pkt_len);
-	}
-}
-
-/*
- * This function is called when a packet has been received. It's job is
- * to prepare to unload the packet from the hardware. Once the length of
- * the packet is known, the upper layer of the driver can be told. When
- * the upper layer is ready to unload the packet, the internal function
- * 'dp83902a_recv' will be called to actually fetch it from the hardware.
- */
-static void
-dp83902a_RxEvent(void)
-{
-	struct dp83902a_priv_data *dp = (struct dp83902a_priv_data *) &nic;
-	u8 *base = dp->base;
-	u8 rsr;
-	u8 rcv_hdr[4];
-	int i, len, pkt, cur;
-
-	DEBUG_FUNCTION();
-
-	DP_IN(base, DP_RSR, rsr);
-	while (true) {
-		/* Read incoming packet header */
-		DP_OUT(base, DP_CR, DP_CR_PAGE1 | DP_CR_NODMA | DP_CR_START);
-		DP_IN(base, DP_P1_CURP, cur);
-		DP_OUT(base, DP_P1_CR, DP_CR_PAGE0 | DP_CR_NODMA | DP_CR_START);
-		DP_IN(base, DP_BNDRY, pkt);
-
-		pkt += 1;
-		if (pkt == dp->rx_buf_end)
-			pkt = dp->rx_buf_start;
-
-		if (pkt == cur) {
-			break;
-		}
-		DP_OUT(base, DP_RBCL, sizeof(rcv_hdr));
-		DP_OUT(base, DP_RBCH, 0);
-		DP_OUT(base, DP_RSAL, 0);
-		DP_OUT(base, DP_RSAH, pkt);
-		if (dp->rx_next == pkt) {
-			if (cur == dp->rx_buf_start)
-				DP_OUT(base, DP_BNDRY, dp->rx_buf_end - 1);
-			else
-				DP_OUT(base, DP_BNDRY, cur - 1); /* Update pointer */
-			return;
-		}
-		dp->rx_next = pkt;
-		DP_OUT(base, DP_ISR, DP_ISR_RDC); /* Clear end of DMA */
-		DP_OUT(base, DP_CR, DP_CR_RDMA | DP_CR_START);
-#ifdef CYGHWR_NS_DP83902A_PLF_BROKEN_RX_DMA
-		CYGACC_CALL_IF_DELAY_US(10);
-#endif
-
-		/* read header (get data size)*/
-		for (i = 0; i < sizeof(rcv_hdr);) {
-			DP_IN_DATA(dp->data, rcv_hdr[i++]);
-		}
-
-#if DEBUG & 5
-		printf("rx hdr %02x %02x %02x %02x\n",
-			rcv_hdr[0], rcv_hdr[1], rcv_hdr[2], rcv_hdr[3]);
-#endif
-		len = ((rcv_hdr[3] << 8) | rcv_hdr[2]) - sizeof(rcv_hdr);
-
-		/* data read */
-		uboot_push_packet_len(len);
-
-		if (rcv_hdr[1] == dp->rx_buf_start)
-			DP_OUT(base, DP_BNDRY, dp->rx_buf_end - 1);
-		else
-			DP_OUT(base, DP_BNDRY, rcv_hdr[1] - 1); /* Update pointer */
-	}
-}
-
-/*
- * This function is called as a result of the "eth_drv_recv()" call above.
- * It's job is to actually fetch data for a packet from the hardware once
- * memory buffers have been allocated for the packet. Note that the buffers
- * may come in pieces, using a scatter-gather list. This allows for more
- * efficient processing in the upper layers of the stack.
- */
-static void
-dp83902a_recv(u8 *data, int len)
-{
-	struct dp83902a_priv_data *dp = (struct dp83902a_priv_data *) &nic;
-	u8 *base = dp->base;
-	int i, mlen;
-	u8 saved_char = 0;
-	bool saved;
-#if DEBUG & 4
-	int dx;
-#endif
-
-	DEBUG_FUNCTION();
-
-#if DEBUG & 5
-	printf("Rx packet %d length %d\n", dp->rx_next, len);
-#endif
-
-	/* Read incoming packet data */
-	DP_OUT(base, DP_CR, DP_CR_PAGE0 | DP_CR_NODMA | DP_CR_START);
-	DP_OUT(base, DP_RBCL, len & 0xFF);
-	DP_OUT(base, DP_RBCH, len >> 8);
-	DP_OUT(base, DP_RSAL, 4);		/* Past header */
-	DP_OUT(base, DP_RSAH, dp->rx_next);
-	DP_OUT(base, DP_ISR, DP_ISR_RDC); /* Clear end of DMA */
-	DP_OUT(base, DP_CR, DP_CR_RDMA | DP_CR_START);
-#ifdef CYGHWR_NS_DP83902A_PLF_BROKEN_RX_DMA
-	CYGACC_CALL_IF_DELAY_US(10);
-#endif
-
-	saved = false;
-	for (i = 0; i < 1; i++) {
-		if (data) {
-			mlen = len;
-#if DEBUG & 4
-			printf(" sg buf %08lx len %08x \n", (u32) data, mlen);
-			dx = 0;
-#endif
-			while (0 < mlen) {
-				/* Saved byte from previous loop? */
-				if (saved) {
-					*data++ = saved_char;
-					mlen--;
-					saved = false;
-					continue;
-				}
-
-				{
-					u8 tmp;
-					DP_IN_DATA(dp->data, tmp);
-#if DEBUG & 4
-					printf(" %02x", tmp);
-					if (0 == (++dx % 16)) printf("\n ");
-#endif
-					*data++ = tmp;;
-					mlen--;
-				}
-			}
-#if DEBUG & 4
-			printf("\n");
-#endif
-		}
-	}
-}
-
-static void
-dp83902a_TxEvent(void)
-{
-	struct dp83902a_priv_data *dp = (struct dp83902a_priv_data *) &nic;
-	u8 *base = dp->base;
-	u8 tsr;
-	u32 key;
-
-	DEBUG_FUNCTION();
-
-	DP_IN(base, DP_TSR, tsr);
-	if (dp->tx_int == 1) {
-		key = dp->tx1_key;
-		dp->tx1 = 0;
-	} else {
-		key = dp->tx2_key;
-		dp->tx2 = 0;
-	}
-	/* Start next packet if one is ready */
-	dp->tx_started = false;
-	if (dp->tx1) {
-		dp83902a_start_xmit(dp->tx1, dp->tx1_len);
-		dp->tx_int = 1;
-	} else if (dp->tx2) {
-		dp83902a_start_xmit(dp->tx2, dp->tx2_len);
-		dp->tx_int = 2;
-	} else {
-		dp->tx_int = 0;
-	}
-	/* Tell higher level we sent this packet */
-	uboot_push_tx_done(key, 0);
-}
-
-/*
- * Read the tally counters to clear them. Called in response to a CNT
- * interrupt.
- */
-static void
-dp83902a_ClearCounters(void)
-{
-	struct dp83902a_priv_data *dp = (struct dp83902a_priv_data *) &nic;
-	u8 *base = dp->base;
-	u8 cnt1, cnt2, cnt3;
-
-	DP_IN(base, DP_FER, cnt1);
-	DP_IN(base, DP_CER, cnt2);
-	DP_IN(base, DP_MISSED, cnt3);
-	DP_OUT(base, DP_ISR, DP_ISR_CNT);
-}
-
-/*
- * Deal with an overflow condition. This code follows the procedure set
- * out in section 7.0 of the datasheet.
- */
-static void
-dp83902a_Overflow(void)
-{
-	struct dp83902a_priv_data *dp = (struct dp83902a_priv_data *)&nic;
-	u8 *base = dp->base;
-	u8 isr;
-
-	/* Issue a stop command and wait 1.6ms for it to complete. */
-	DP_OUT(base, DP_CR, DP_CR_STOP | DP_CR_NODMA);
-	CYGACC_CALL_IF_DELAY_US(1600);
-
-	/* Clear the remote byte counter registers. */
-	DP_OUT(base, DP_RBCL, 0);
-	DP_OUT(base, DP_RBCH, 0);
-
-	/* Enter loopback mode while we clear the buffer. */
-	DP_OUT(base, DP_TCR, DP_TCR_LOCAL);
-	DP_OUT(base, DP_CR, DP_CR_START | DP_CR_NODMA);
-
-	/*
-	 * Read in as many packets as we can and acknowledge any and receive
-	 * interrupts. Since the buffer has overflowed, a receive event of
-	 * some kind will have occured.
-	 */
-	dp83902a_RxEvent();
-	DP_OUT(base, DP_ISR, DP_ISR_RxP|DP_ISR_RxE);
-
-	/* Clear the overflow condition and leave loopback mode. */
-	DP_OUT(base, DP_ISR, DP_ISR_OFLW);
-	DP_OUT(base, DP_TCR, DP_TCR_NORMAL);
-
-	/*
-	 * If a transmit command was issued, but no transmit event has occured,
-	 * restart it here.
-	 */
-	DP_IN(base, DP_ISR, isr);
-	if (dp->tx_started && !(isr & (DP_ISR_TxP|DP_ISR_TxE))) {
-		DP_OUT(base, DP_CR, DP_CR_NODMA | DP_CR_TXPKT | DP_CR_START);
-	}
-}
-
-static void
-dp83902a_poll(void)
-{
-	struct dp83902a_priv_data *dp = (struct dp83902a_priv_data *) &nic;
-	u8 *base = dp->base;
-	u8 isr;
-
-	DP_OUT(base, DP_CR, DP_CR_NODMA | DP_CR_PAGE0 | DP_CR_START);
-	DP_IN(base, DP_ISR, isr);
-	while (0 != isr) {
-		/*
-		 * The CNT interrupt triggers when the MSB of one of the error
-		 * counters is set. We don't much care about these counters, but
-		 * we should read their values to reset them.
-		 */
-		if (isr & DP_ISR_CNT) {
-			dp83902a_ClearCounters();
-		}
-		/*
-		 * Check for overflow. It's a special case, since there's a
-		 * particular procedure that must be followed to get back into
-		 * a running state.a
-		 */
-		if (isr & DP_ISR_OFLW) {
-			dp83902a_Overflow();
-		} else {
-			/*
-			 * Other kinds of interrupts can be acknowledged simply by
-			 * clearing the relevant bits of the ISR. Do that now, then
-			 * handle the interrupts we care about.
-			 */
-			DP_OUT(base, DP_ISR, isr);	/* Clear set bits */
-			if (!dp->running) break;	/* Is this necessary? */
-			/*
-			 * Check for tx_started on TX event since these may happen
-			 * spuriously it seems.
-			 */
-			if (isr & (DP_ISR_TxP|DP_ISR_TxE) && dp->tx_started) {
-				dp83902a_TxEvent();
-			}
-			if (isr & (DP_ISR_RxP|DP_ISR_RxE)) {
-				dp83902a_RxEvent();
-			}
-		}
-		DP_IN(base, DP_ISR, isr);
-	}
-}
-
+#define mdelay(n) udelay((n)*1000)
 /* find prom (taken from pc_net_cs.c from Linux) */
 
 #include "8390.h"
@@ -763,18 +174,16 @@ static hw_info_t hw_info[] = {
 #define PCNET_RESET	0x1f	/* Issue a read to reset, a write to clear. */
 #define PCNET_MISC	0x18	/* For IBM CCAE and Socket EA cards */
 
-static void pcnet_reset_8390(void)
+static void pcnet_reset_8390(u8* addr)
 {
 	int i, r;
 
-	PRINTK("nic base is %lx\n", nic.base);
-
 	n2k_outb(E8390_NODMA + E8390_PAGE0+E8390_STOP, E8390_CMD);
-	PRINTK("cmd (at %lx) is %x\n", nic.base + E8390_CMD, n2k_inb(E8390_CMD));
+	PRINTK("cmd (at %lx) is %x\n", addr + E8390_CMD, n2k_inb(E8390_CMD));
 	n2k_outb(E8390_NODMA+E8390_PAGE1+E8390_STOP, E8390_CMD);
-	PRINTK("cmd (at %lx) is %x\n", nic.base + E8390_CMD, n2k_inb(E8390_CMD));
+	PRINTK("cmd (at %lx) is %x\n", addr + E8390_CMD, n2k_inb(E8390_CMD));
 	n2k_outb(E8390_NODMA+E8390_PAGE0+E8390_STOP, E8390_CMD);
-	PRINTK("cmd (at %lx) is %x\n", nic.base + E8390_CMD, n2k_inb(E8390_CMD));
+	PRINTK("cmd (at %lx) is %x\n", addr + E8390_CMD, n2k_inb(E8390_CMD));
 	n2k_outb(E8390_NODMA+E8390_PAGE0+E8390_STOP, E8390_CMD);
 
 	n2k_outb(n2k_inb(PCNET_RESET), PCNET_RESET);
@@ -791,8 +200,7 @@ static void pcnet_reset_8390(void)
 		printf("pcnet_reset_8390() did not complete.\n");
 } /* pcnet_reset_8390 */
 
-int get_prom(u8* mac_addr) __attribute__ ((weak, alias ("__get_prom")));
-int __get_prom(u8* mac_addr)
+int get_prom(u8* mac_addr, u8* base_addr)
 {
 	u8 prom[32];
 	int i, j;
@@ -816,7 +224,7 @@ int __get_prom(u8* mac_addr)
 
 	PRINTK ("trying to get MAC via prom reading\n");
 
-	pcnet_reset_8390 ();
+	pcnet_reset_8390 (base_addr);
 
 	mdelay (10);
 
@@ -849,116 +257,3 @@ int __get_prom(u8* mac_addr)
 	}
 	return 0;
 }
-
-/* U-boot specific routines */
-static u8 *pbuf = NULL;
-
-static int pkey = -1;
-static int initialized = 0;
-
-void uboot_push_packet_len(int len) {
-	PRINTK("pushed len = %d\n", len);
-	if (len >= 2000) {
-		printf("NE2000: packet too big\n");
-		return;
-	}
-	dp83902a_recv(&pbuf[0], len);
-
-	/*Just pass it to the upper layer*/
-	NetReceive(&pbuf[0], len);
-}
-
-void uboot_push_tx_done(int key, int val) {
-	PRINTK("pushed key = %d\n", key);
-	pkey = key;
-}
-
-int eth_init(bd_t *bd) {
-	int r;
-	u8 dev_addr[6];
-	char ethaddr[20];
-
-	PRINTK("### eth_init\n");
-
-	if (!pbuf) {
-		pbuf = malloc(2000);
-		if (!pbuf) {
-			printf("Cannot allocate rx buffer\n");
-			return -1;
-		}
-	}
-
-#ifdef CONFIG_DRIVER_NE2000_CCR
-	{
-		vu_char *p = (vu_char *) CONFIG_DRIVER_NE2000_CCR;
-
-		PRINTK("CCR before is %x\n", *p);
-		*p = CONFIG_DRIVER_NE2000_VAL;
-		PRINTK("CCR after is %x\n", *p);
-	}
-#endif
-
-	nic.base = (u8 *) CONFIG_DRIVER_NE2000_BASE;
-
-	r = get_prom(dev_addr);
-	if (!r)
-		return -1;
-
-	sprintf (ethaddr, "%02X:%02X:%02X:%02X:%02X:%02X",
-		 dev_addr[0], dev_addr[1],
-		 dev_addr[2], dev_addr[3],
-		 dev_addr[4], dev_addr[5]) ;
-	PRINTK("Set environment from HW MAC addr = \"%s\"\n", ethaddr);
-	setenv ("ethaddr", ethaddr);
-
-	nic.data = nic.base + DP_DATA;
-	nic.tx_buf1 = START_PG;
-	nic.tx_buf2 = START_PG2;
-	nic.rx_buf_start = RX_START;
-	nic.rx_buf_end = RX_END;
-
-	if (dp83902a_init() == false)
-		return -1;
-
-	dp83902a_start(dev_addr);
-	initialized = 1;
-
-	return 0;
-}
-
-void eth_halt() {
-
-	PRINTK("### eth_halt\n");
-	if(initialized)
-		dp83902a_stop();
-	initialized = 0;
-}
-
-int eth_rx() {
-	dp83902a_poll();
-	return 1;
-}
-
-int eth_send(volatile void *packet, int length) {
-	int tmo;
-
-	PRINTK("### eth_send\n");
-
-	pkey = -1;
-
-	dp83902a_send((u8 *) packet, length, 666);
-	tmo = get_timer (0) + TOUT * CFG_HZ;
-	while(1) {
-		dp83902a_poll();
-		if (pkey != -1) {
-			PRINTK("Packet sucesfully sent\n");
-			return 0;
-		}
-		if (get_timer (0) >= tmo) {
-			printf("transmission error (timoeut)\n");
-			return 0;
-		}
-
-	}
-	return 0;
-}
diff --git a/drivers/net/ne2000_base.c b/drivers/net/ne2000_base.c
new file mode 100644
index 000000000..f93f93227
--- /dev/null
+++ b/drivers/net/ne2000_base.c
@@ -0,0 +1,757 @@
+/*
+Ported to U-Boot by Christian Pellegrin <chri@ascensit.com>
+
+Based on sources from the Linux kernel (pcnet_cs.c, 8390.h) and
+eCOS(if_dp83902a.c, if_dp83902a.h). Both of these 2 wonderful world
+are GPL, so this is, of course, GPL.
+
+==========================================================================
+
+dev/if_dp83902a.c
+
+Ethernet device driver for NS DP83902a ethernet controller
+
+==========================================================================
+####ECOSGPLCOPYRIGHTBEGIN####
+-------------------------------------------
+This file is part of eCos, the Embedded Configurable Operating System.
+Copyright (C) 1998, 1999, 2000, 2001, 2002 Red Hat, Inc.
+
+eCos is free software; you can redistribute it and/or modify it under
+the terms of the GNU General Public License as published by the Free
+Software Foundation; either version 2 or (at your option) any later version.
+
+eCos is distributed in the hope that it will be useful, but WITHOUT ANY
+WARRANTY; without even the implied warranty of MERCHANTABILITY or
+FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+for more details.
+
+You should have received a copy of the GNU General Public License along
+with eCos; if not, write to the Free Software Foundation, Inc.,
+59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
+
+As a special exception, if other files instantiate templates or use macros
+or inline functions from this file, or you compile this file and link it
+with other works to produce a work based on this file, this file does not
+by itself cause the resulting work to be covered by the GNU General Public
+License. However the source code for this file must still be made available
+in accordance with section (3) of the GNU General Public License.
+
+This exception does not invalidate any other reasons why a work based on
+this file might be covered by the GNU General Public License.
+
+Alternative licenses for eCos may be arranged by contacting Red Hat, Inc.
+at http://sources.redhat.com/ecos/ecos-license/
+-------------------------------------------
+####ECOSGPLCOPYRIGHTEND####
+####BSDCOPYRIGHTBEGIN####
+
+-------------------------------------------
+
+Portions of this software may have been derived from OpenBSD or other sources,
+and are covered by the appropriate copyright disclaimers included herein.
+
+-------------------------------------------
+
+####BSDCOPYRIGHTEND####
+==========================================================================
+#####DESCRIPTIONBEGIN####
+
+Author(s):	gthomas
+Contributors:	gthomas, jskov, rsandifo
+Date:		2001-06-13
+Purpose:
+Description:
+
+FIXME:		Will fail if pinged with large packets (1520 bytes)
+Add promisc config
+Add SNMP
+
+####DESCRIPTIONEND####
+
+==========================================================================
+*/
+
+#include <common.h>
+#include <command.h>
+#include <net.h>
+#include <malloc.h>
+
+#define mdelay(n)	udelay((n)*1000)
+/* forward definition of function used for the uboot interface */
+void uboot_push_packet_len(int len);
+void uboot_push_tx_done(int key, int val);
+
+/* NE2000 base header file */
+#include "ne2000_base.h"
+
+#if defined(CONFIG_DRIVER_AX88796L)
+/* AX88796L support */
+#include "ax88796.h"
+#else
+/* Basic NE2000 chip support */
+#include "ne2000.h"
+#endif
+
+static dp83902a_priv_data_t nic; /* just one instance of the card supported */
+
+static bool
+dp83902a_init(void)
+{
+	dp83902a_priv_data_t *dp = &nic;
+	u8* base;
+#if defined(NE2000_BASIC_INIT)
+	int i;
+#endif
+
+	DEBUG_FUNCTION();
+
+	base = dp->base;
+	if (!base)
+		return false;	/* No device found */
+
+	DEBUG_LINE();
+
+#if defined(NE2000_BASIC_INIT)
+	/* AX88796L doesn't need */
+	/* Prepare ESA */
+	DP_OUT(base, DP_CR, DP_CR_NODMA | DP_CR_PAGE1);	/* Select page 1 */
+	/* Use the address from the serial EEPROM */
+	for (i = 0; i < 6; i++)
+		DP_IN(base, DP_P1_PAR0+i, dp->esa[i]);
+	DP_OUT(base, DP_CR, DP_CR_NODMA | DP_CR_PAGE0);	/* Select page 0 */
+
+	printf("NE2000 - %s ESA: %02x:%02x:%02x:%02x:%02x:%02x\n",
+		"eeprom",
+		dp->esa[0],
+		dp->esa[1],
+		dp->esa[2],
+		dp->esa[3],
+		dp->esa[4],
+		dp->esa[5] );
+
+#endif	/* NE2000_BASIC_INIT */
+	return true;
+}
+
+static void
+dp83902a_stop(void)
+{
+	dp83902a_priv_data_t *dp = &nic;
+	u8 *base = dp->base;
+
+	DEBUG_FUNCTION();
+
+	DP_OUT(base, DP_CR, DP_CR_PAGE0 | DP_CR_NODMA | DP_CR_STOP);	/* Brutal */
+	DP_OUT(base, DP_ISR, 0xFF);		/* Clear any pending interrupts */
+	DP_OUT(base, DP_IMR, 0x00);		/* Disable all interrupts */
+
+	dp->running = false;
+}
+
+/*
+ * This function is called to "start up" the interface. It may be called
+ * multiple times, even when the hardware is already running. It will be
+ * called whenever something "hardware oriented" changes and should leave
+ * the hardware ready to send/receive packets.
+ */
+static void
+dp83902a_start(u8 * enaddr)
+{
+	dp83902a_priv_data_t *dp = &nic;
+	u8 *base = dp->base;
+	int i;
+
+	DEBUG_FUNCTION();
+
+	DP_OUT(base, DP_CR, DP_CR_PAGE0 | DP_CR_NODMA | DP_CR_STOP); /* Brutal */
+	DP_OUT(base, DP_DCR, DP_DCR_INIT);
+	DP_OUT(base, DP_RBCH, 0);		/* Remote byte count */
+	DP_OUT(base, DP_RBCL, 0);
+	DP_OUT(base, DP_RCR, DP_RCR_MON);	/* Accept no packets */
+	DP_OUT(base, DP_TCR, DP_TCR_LOCAL);	/* Transmitter [virtually] off */
+	DP_OUT(base, DP_TPSR, dp->tx_buf1);	/* Transmitter start page */
+	dp->tx1 = dp->tx2 = 0;
+	dp->tx_next = dp->tx_buf1;
+	dp->tx_started = false;
+	dp->running = true;
+	DP_OUT(base, DP_PSTART, dp->rx_buf_start); /* Receive ring start page */
+	DP_OUT(base, DP_BNDRY, dp->rx_buf_end - 1); /* Receive ring boundary */
+	DP_OUT(base, DP_PSTOP, dp->rx_buf_end);	/* Receive ring end page */
+	dp->rx_next = dp->rx_buf_start - 1;
+	dp->running = true;
+	DP_OUT(base, DP_ISR, 0xFF);		/* Clear any pending interrupts */
+	DP_OUT(base, DP_IMR, DP_IMR_All);	/* Enable all interrupts */
+	DP_OUT(base, DP_CR, DP_CR_NODMA | DP_CR_PAGE1 | DP_CR_STOP);	/* Select page 1 */
+	DP_OUT(base, DP_P1_CURP, dp->rx_buf_start);	/* Current page - next free page for Rx */
+	dp->running = true;
+	for (i = 0; i < ETHER_ADDR_LEN; i++) {
+		/* FIXME */
+		/*((vu_short*)( base + ((DP_P1_PAR0 + i) * 2) +
+		 * 0x1400)) = enaddr[i];*/
+		DP_OUT(base, DP_P1_PAR0+i, enaddr[i]);
+	}
+	/* Enable and start device */
+	DP_OUT(base, DP_CR, DP_CR_PAGE0 | DP_CR_NODMA | DP_CR_START);
+	DP_OUT(base, DP_TCR, DP_TCR_NORMAL); /* Normal transmit operations */
+	DP_OUT(base, DP_RCR, DP_RCR_AB); /* Accept broadcast, no errors, no multicast */
+	dp->running = true;
+}
+
+/*
+ * This routine is called to start the transmitter. It is split out from the
+ * data handling routine so it may be called either when data becomes first
+ * available or when an Tx interrupt occurs
+ */
+
+static void
+dp83902a_start_xmit(int start_page, int len)
+{
+	dp83902a_priv_data_t *dp = (dp83902a_priv_data_t *) &nic;
+	u8 *base = dp->base;
+
+	DEBUG_FUNCTION();
+
+#if DEBUG & 1
+	printf("Tx pkt %d len %d\n", start_page, len);
+	if (dp->tx_started)
+		printf("TX already started?!?\n");
+#endif
+
+	DP_OUT(base, DP_ISR, (DP_ISR_TxP | DP_ISR_TxE));
+	DP_OUT(base, DP_CR, DP_CR_PAGE0 | DP_CR_NODMA | DP_CR_START);
+	DP_OUT(base, DP_TBCL, len & 0xFF);
+	DP_OUT(base, DP_TBCH, len >> 8);
+	DP_OUT(base, DP_TPSR, start_page);
+	DP_OUT(base, DP_CR, DP_CR_NODMA | DP_CR_TXPKT | DP_CR_START);
+
+	dp->tx_started = true;
+}
+
+/*
+ * This routine is called to send data to the hardware. It is known a-priori
+ * that there is free buffer space (dp->tx_next).
+ */
+static void
+dp83902a_send(u8 *data, int total_len, u32 key)
+{
+	struct dp83902a_priv_data *dp = (struct dp83902a_priv_data *) &nic;
+	u8 *base = dp->base;
+	int len, start_page, pkt_len, i, isr;
+#if DEBUG & 4
+	int dx;
+#endif
+
+	DEBUG_FUNCTION();
+
+	len = pkt_len = total_len;
+	if (pkt_len < IEEE_8023_MIN_FRAME)
+		pkt_len = IEEE_8023_MIN_FRAME;
+
+	start_page = dp->tx_next;
+	if (dp->tx_next == dp->tx_buf1) {
+		dp->tx1 = start_page;
+		dp->tx1_len = pkt_len;
+		dp->tx1_key = key;
+		dp->tx_next = dp->tx_buf2;
+	} else {
+		dp->tx2 = start_page;
+		dp->tx2_len = pkt_len;
+		dp->tx2_key = key;
+		dp->tx_next = dp->tx_buf1;
+	}
+
+#if DEBUG & 5
+	printf("TX prep page %d len %d\n", start_page, pkt_len);
+#endif
+
+	DP_OUT(base, DP_ISR, DP_ISR_RDC);	/* Clear end of DMA */
+	{
+		/*
+		 * Dummy read. The manual sez something slightly different,
+		 * but the code is extended a bit to do what Hitachi's monitor
+		 * does (i.e., also read data).
+		 */
+
+		u16 tmp;
+		int len = 1;
+
+		DP_OUT(base, DP_RSAL, 0x100 - len);
+		DP_OUT(base, DP_RSAH, (start_page - 1) & 0xff);
+		DP_OUT(base, DP_RBCL, len);
+		DP_OUT(base, DP_RBCH, 0);
+		DP_OUT(base, DP_CR, DP_CR_PAGE0 | DP_CR_RDMA | DP_CR_START);
+		DP_IN_DATA(dp->data, tmp);
+	}
+
+#ifdef CYGHWR_NS_DP83902A_PLF_BROKEN_TX_DMA
+	/*
+	 * Stall for a bit before continuing to work around random data
+	 * corruption problems on some platforms.
+	 */
+	CYGACC_CALL_IF_DELAY_US(1);
+#endif
+
+	/* Send data to device buffer(s) */
+	DP_OUT(base, DP_RSAL, 0);
+	DP_OUT(base, DP_RSAH, start_page);
+	DP_OUT(base, DP_RBCL, pkt_len & 0xFF);
+	DP_OUT(base, DP_RBCH, pkt_len >> 8);
+	DP_OUT(base, DP_CR, DP_CR_WDMA | DP_CR_START);
+
+	/* Put data into buffer */
+#if DEBUG & 4
+	printf(" sg buf %08lx len %08x\n ", (u32)data, len);
+	dx = 0;
+#endif
+	while (len > 0) {
+#if DEBUG & 4
+		printf(" %02x", *data);
+		if (0 == (++dx % 16)) printf("\n ");
+#endif
+
+		DP_OUT_DATA(dp->data, *data++);
+		len--;
+	}
+#if DEBUG & 4
+	printf("\n");
+#endif
+	if (total_len < pkt_len) {
+#if DEBUG & 4
+		printf("  + %d bytes of padding\n", pkt_len - total_len);
+#endif
+		/* Padding to 802.3 length was required */
+		for (i = total_len; i < pkt_len;) {
+			i++;
+			DP_OUT_DATA(dp->data, 0);
+		}
+	}
+
+#ifdef CYGHWR_NS_DP83902A_PLF_BROKEN_TX_DMA
+	/*
+	 * After last data write, delay for a bit before accessing the
+	 * device again, or we may get random data corruption in the last
+	 * datum (on some platforms).
+	 */
+	CYGACC_CALL_IF_DELAY_US(1);
+#endif
+
+	/* Wait for DMA to complete */
+	do {
+		DP_IN(base, DP_ISR, isr);
+	} while ((isr & DP_ISR_RDC) == 0);
+
+	/* Then disable DMA */
+	DP_OUT(base, DP_CR, DP_CR_PAGE0 | DP_CR_NODMA | DP_CR_START);
+
+	/* Start transmit if not already going */
+	if (!dp->tx_started) {
+		if (start_page == dp->tx1) {
+			dp->tx_int = 1; /* Expecting interrupt from BUF1 */
+		} else {
+			dp->tx_int = 2; /* Expecting interrupt from BUF2 */
+		}
+		dp83902a_start_xmit(start_page, pkt_len);
+	}
+}
+
+/*
+ * This function is called when a packet has been received. It's job is
+ * to prepare to unload the packet from the hardware. Once the length of
+ * the packet is known, the upper layer of the driver can be told. When
+ * the upper layer is ready to unload the packet, the internal function
+ * 'dp83902a_recv' will be called to actually fetch it from the hardware.
+ */
+static void
+dp83902a_RxEvent(void)
+{
+	struct dp83902a_priv_data *dp = (struct dp83902a_priv_data *) &nic;
+	u8 *base = dp->base;
+	u8 rsr;
+	u8 rcv_hdr[4];
+	int i, len, pkt, cur;
+
+	DEBUG_FUNCTION();
+
+	DP_IN(base, DP_RSR, rsr);
+	while (true) {
+		/* Read incoming packet header */
+		DP_OUT(base, DP_CR, DP_CR_PAGE1 | DP_CR_NODMA | DP_CR_START);
+		DP_IN(base, DP_P1_CURP, cur);
+		DP_OUT(base, DP_P1_CR, DP_CR_PAGE0 | DP_CR_NODMA | DP_CR_START);
+		DP_IN(base, DP_BNDRY, pkt);
+
+		pkt += 1;
+		if (pkt == dp->rx_buf_end)
+			pkt = dp->rx_buf_start;
+
+		if (pkt == cur) {
+			break;
+		}
+		DP_OUT(base, DP_RBCL, sizeof(rcv_hdr));
+		DP_OUT(base, DP_RBCH, 0);
+		DP_OUT(base, DP_RSAL, 0);
+		DP_OUT(base, DP_RSAH, pkt);
+		if (dp->rx_next == pkt) {
+			if (cur == dp->rx_buf_start)
+				DP_OUT(base, DP_BNDRY, dp->rx_buf_end - 1);
+			else
+				DP_OUT(base, DP_BNDRY, cur - 1); /* Update pointer */
+			return;
+		}
+		dp->rx_next = pkt;
+		DP_OUT(base, DP_ISR, DP_ISR_RDC); /* Clear end of DMA */
+		DP_OUT(base, DP_CR, DP_CR_RDMA | DP_CR_START);
+#ifdef CYGHWR_NS_DP83902A_PLF_BROKEN_RX_DMA
+		CYGACC_CALL_IF_DELAY_US(10);
+#endif
+
+		/* read header (get data size)*/
+		for (i = 0; i < sizeof(rcv_hdr);) {
+			DP_IN_DATA(dp->data, rcv_hdr[i++]);
+		}
+
+#if DEBUG & 5
+		printf("rx hdr %02x %02x %02x %02x\n",
+			rcv_hdr[0], rcv_hdr[1], rcv_hdr[2], rcv_hdr[3]);
+#endif
+		len = ((rcv_hdr[3] << 8) | rcv_hdr[2]) - sizeof(rcv_hdr);
+
+		/* data read */
+		uboot_push_packet_len(len);
+
+		if (rcv_hdr[1] == dp->rx_buf_start)
+			DP_OUT(base, DP_BNDRY, dp->rx_buf_end - 1);
+		else
+			DP_OUT(base, DP_BNDRY, rcv_hdr[1] - 1); /* Update pointer */
+	}
+}
+
+/*
+ * This function is called as a result of the "eth_drv_recv()" call above.
+ * It's job is to actually fetch data for a packet from the hardware once
+ * memory buffers have been allocated for the packet. Note that the buffers
+ * may come in pieces, using a scatter-gather list. This allows for more
+ * efficient processing in the upper layers of the stack.
+ */
+static void
+dp83902a_recv(u8 *data, int len)
+{
+	struct dp83902a_priv_data *dp = (struct dp83902a_priv_data *) &nic;
+	u8 *base = dp->base;
+	int i, mlen;
+	u8 saved_char = 0;
+	bool saved;
+#if DEBUG & 4
+	int dx;
+#endif
+
+	DEBUG_FUNCTION();
+
+#if DEBUG & 5
+	printf("Rx packet %d length %d\n", dp->rx_next, len);
+#endif
+
+	/* Read incoming packet data */
+	DP_OUT(base, DP_CR, DP_CR_PAGE0 | DP_CR_NODMA | DP_CR_START);
+	DP_OUT(base, DP_RBCL, len & 0xFF);
+	DP_OUT(base, DP_RBCH, len >> 8);
+	DP_OUT(base, DP_RSAL, 4);		/* Past header */
+	DP_OUT(base, DP_RSAH, dp->rx_next);
+	DP_OUT(base, DP_ISR, DP_ISR_RDC); /* Clear end of DMA */
+	DP_OUT(base, DP_CR, DP_CR_RDMA | DP_CR_START);
+#ifdef CYGHWR_NS_DP83902A_PLF_BROKEN_RX_DMA
+	CYGACC_CALL_IF_DELAY_US(10);
+#endif
+
+	saved = false;
+	for (i = 0; i < 1; i++) {
+		if (data) {
+			mlen = len;
+#if DEBUG & 4
+			printf(" sg buf %08lx len %08x \n", (u32) data, mlen);
+			dx = 0;
+#endif
+			while (0 < mlen) {
+				/* Saved byte from previous loop? */
+				if (saved) {
+					*data++ = saved_char;
+					mlen--;
+					saved = false;
+					continue;
+				}
+
+				{
+					u8 tmp;
+					DP_IN_DATA(dp->data, tmp);
+#if DEBUG & 4
+					printf(" %02x", tmp);
+					if (0 == (++dx % 16)) printf("\n ");
+#endif
+					*data++ = tmp;;
+					mlen--;
+				}
+			}
+#if DEBUG & 4
+			printf("\n");
+#endif
+		}
+	}
+}
+
+static void
+dp83902a_TxEvent(void)
+{
+	struct dp83902a_priv_data *dp = (struct dp83902a_priv_data *) &nic;
+	u8 *base = dp->base;
+	u8 tsr;
+	u32 key;
+
+	DEBUG_FUNCTION();
+
+	DP_IN(base, DP_TSR, tsr);
+	if (dp->tx_int == 1) {
+		key = dp->tx1_key;
+		dp->tx1 = 0;
+	} else {
+		key = dp->tx2_key;
+		dp->tx2 = 0;
+	}
+	/* Start next packet if one is ready */
+	dp->tx_started = false;
+	if (dp->tx1) {
+		dp83902a_start_xmit(dp->tx1, dp->tx1_len);
+		dp->tx_int = 1;
+	} else if (dp->tx2) {
+		dp83902a_start_xmit(dp->tx2, dp->tx2_len);
+		dp->tx_int = 2;
+	} else {
+		dp->tx_int = 0;
+	}
+	/* Tell higher level we sent this packet */
+	uboot_push_tx_done(key, 0);
+}
+
+/*
+ * Read the tally counters to clear them. Called in response to a CNT
+ * interrupt.
+ */
+static void
+dp83902a_ClearCounters(void)
+{
+	struct dp83902a_priv_data *dp = (struct dp83902a_priv_data *) &nic;
+	u8 *base = dp->base;
+	u8 cnt1, cnt2, cnt3;
+
+	DP_IN(base, DP_FER, cnt1);
+	DP_IN(base, DP_CER, cnt2);
+	DP_IN(base, DP_MISSED, cnt3);
+	DP_OUT(base, DP_ISR, DP_ISR_CNT);
+}
+
+/*
+ * Deal with an overflow condition. This code follows the procedure set
+ * out in section 7.0 of the datasheet.
+ */
+static void
+dp83902a_Overflow(void)
+{
+	struct dp83902a_priv_data *dp = (struct dp83902a_priv_data *)&nic;
+	u8 *base = dp->base;
+	u8 isr;
+
+	/* Issue a stop command and wait 1.6ms for it to complete. */
+	DP_OUT(base, DP_CR, DP_CR_STOP | DP_CR_NODMA);
+	CYGACC_CALL_IF_DELAY_US(1600);
+
+	/* Clear the remote byte counter registers. */
+	DP_OUT(base, DP_RBCL, 0);
+	DP_OUT(base, DP_RBCH, 0);
+
+	/* Enter loopback mode while we clear the buffer. */
+	DP_OUT(base, DP_TCR, DP_TCR_LOCAL);
+	DP_OUT(base, DP_CR, DP_CR_START | DP_CR_NODMA);
+
+	/*
+	 * Read in as many packets as we can and acknowledge any and receive
+	 * interrupts. Since the buffer has overflowed, a receive event of
+	 * some kind will have occured.
+	 */
+	dp83902a_RxEvent();
+	DP_OUT(base, DP_ISR, DP_ISR_RxP|DP_ISR_RxE);
+
+	/* Clear the overflow condition and leave loopback mode. */
+	DP_OUT(base, DP_ISR, DP_ISR_OFLW);
+	DP_OUT(base, DP_TCR, DP_TCR_NORMAL);
+
+	/*
+	 * If a transmit command was issued, but no transmit event has occured,
+	 * restart it here.
+	 */
+	DP_IN(base, DP_ISR, isr);
+	if (dp->tx_started && !(isr & (DP_ISR_TxP|DP_ISR_TxE))) {
+		DP_OUT(base, DP_CR, DP_CR_NODMA | DP_CR_TXPKT | DP_CR_START);
+	}
+}
+
+static void
+dp83902a_poll(void)
+{
+	struct dp83902a_priv_data *dp = (struct dp83902a_priv_data *) &nic;
+	u8 *base = dp->base;
+	u8 isr;
+
+	DP_OUT(base, DP_CR, DP_CR_NODMA | DP_CR_PAGE0 | DP_CR_START);
+	DP_IN(base, DP_ISR, isr);
+	while (0 != isr) {
+		/*
+		 * The CNT interrupt triggers when the MSB of one of the error
+		 * counters is set. We don't much care about these counters, but
+		 * we should read their values to reset them.
+		 */
+		if (isr & DP_ISR_CNT) {
+			dp83902a_ClearCounters();
+		}
+		/*
+		 * Check for overflow. It's a special case, since there's a
+		 * particular procedure that must be followed to get back into
+		 * a running state.a
+		 */
+		if (isr & DP_ISR_OFLW) {
+			dp83902a_Overflow();
+		} else {
+			/*
+			 * Other kinds of interrupts can be acknowledged simply by
+			 * clearing the relevant bits of the ISR. Do that now, then
+			 * handle the interrupts we care about.
+			 */
+			DP_OUT(base, DP_ISR, isr);	/* Clear set bits */
+			if (!dp->running) break;	/* Is this necessary? */
+			/*
+			 * Check for tx_started on TX event since these may happen
+			 * spuriously it seems.
+			 */
+			if (isr & (DP_ISR_TxP|DP_ISR_TxE) && dp->tx_started) {
+				dp83902a_TxEvent();
+			}
+			if (isr & (DP_ISR_RxP|DP_ISR_RxE)) {
+				dp83902a_RxEvent();
+			}
+		}
+		DP_IN(base, DP_ISR, isr);
+	}
+}
+
+
+/* U-boot specific routines */
+static u8 *pbuf = NULL;
+
+static int pkey = -1;
+static int initialized = 0;
+
+void uboot_push_packet_len(int len) {
+	PRINTK("pushed len = %d\n", len);
+	if (len >= 2000) {
+		printf("NE2000: packet too big\n");
+		return;
+	}
+	dp83902a_recv(&pbuf[0], len);
+
+	/*Just pass it to the upper layer*/
+	NetReceive(&pbuf[0], len);
+}
+
+void uboot_push_tx_done(int key, int val) {
+	PRINTK("pushed key = %d\n", key);
+	pkey = key;
+}
+
+int eth_init(bd_t *bd) {
+	int r;
+	u8 dev_addr[6];
+	char ethaddr[20];
+
+	PRINTK("### eth_init\n");
+
+	if (!pbuf) {
+		pbuf = malloc(2000);
+		if (!pbuf) {
+			printf("Cannot allocate rx buffer\n");
+			return -1;
+		}
+	}
+
+#ifdef CONFIG_DRIVER_NE2000_CCR
+	{
+		vu_char *p = (vu_char *) CONFIG_DRIVER_NE2000_CCR;
+
+		PRINTK("CCR before is %x\n", *p);
+		*p = CONFIG_DRIVER_NE2000_VAL;
+		PRINTK("CCR after is %x\n", *p);
+	}
+#endif
+
+	nic.base = (u8 *) CONFIG_DRIVER_NE2000_BASE;
+
+	r = get_prom(dev_addr, nic.base);
+	if (!r)
+		return -1;
+
+	sprintf (ethaddr, "%02X:%02X:%02X:%02X:%02X:%02X",
+		 dev_addr[0], dev_addr[1],
+		 dev_addr[2], dev_addr[3],
+		 dev_addr[4], dev_addr[5]) ;
+	PRINTK("Set environment from HW MAC addr = \"%s\"\n", ethaddr);
+	setenv ("ethaddr", ethaddr);
+
+	nic.data = nic.base + DP_DATA;
+	nic.tx_buf1 = START_PG;
+	nic.tx_buf2 = START_PG2;
+	nic.rx_buf_start = RX_START;
+	nic.rx_buf_end = RX_END;
+
+	if (dp83902a_init() == false)
+		return -1;
+
+	dp83902a_start(dev_addr);
+	initialized = 1;
+
+	return 0;
+}
+
+void eth_halt() {
+
+	PRINTK("### eth_halt\n");
+	if(initialized)
+		dp83902a_stop();
+	initialized = 0;
+}
+
+int eth_rx() {
+	dp83902a_poll();
+	return 1;
+}
+
+int eth_send(volatile void *packet, int length) {
+	int tmo;
+
+	PRINTK("### eth_send\n");
+
+	pkey = -1;
+
+	dp83902a_send((u8 *) packet, length, 666);
+	tmo = get_timer (0) + TOUT * CONFIG_SYS_HZ;
+	while(1) {
+		dp83902a_poll();
+		if (pkey != -1) {
+			PRINTK("Packet sucesfully sent\n");
+			return 0;
+		}
+		if (get_timer (0) >= tmo) {
+			printf("transmission error (timoeut)\n");
+			return 0;
+		}
+
+	}
+	return 0;
+}
diff --git a/drivers/net/ne2000_base.h b/drivers/net/ne2000_base.h
index 948b2906c..5446de4bb 100644
--- a/drivers/net/ne2000_base.h
+++ b/drivers/net/ne2000_base.h
@@ -80,10 +80,35 @@ are GPL, so this is, of course, GPL.
 #define __NE2000_BASE_H__
 
 #define bool int
-
 #define false 0
 #define true 1
 
+/*
+ * Debugging details
+ *
+ * Set to perms of:
+ * 0 disables all debug output
+ * 1 for process debug output
+ * 2 for added data IO output: get_reg, put_reg
+ * 4 for packet allocation/free output
+ * 8 for only startup status, so we can tell we're installed OK
+ */
+#if 0
+#define DEBUG 0xf
+#else
+#define DEBUG 0
+#endif
+
+#if DEBUG & 1
+#define DEBUG_FUNCTION() do { printf("%s\n", __FUNCTION__); } while (0)
+#define DEBUG_LINE() do { printf("%d\n", __LINE__); } while (0)
+#define PRINTK(args...) printf(args)
+#else
+#define DEBUG_FUNCTION() do {} while(0)
+#define DEBUG_LINE() do {} while(0)
+#define PRINTK(args...)
+#endif
+
 /* timeout for tx/rx in s */
 #define TOUT 5
 /* Ether MAC address size */
@@ -119,11 +144,6 @@ typedef struct dp83902a_priv_data {
 	int rx_buf_start, rx_buf_end;
 } dp83902a_priv_data_t;
 
-/*
- * Some forward declarations
- */
-static void dp83902a_poll(void);
-
 /* ------------------------------------------------------------------------ */
 /* Register offsets */
 
@@ -281,4 +301,8 @@ static void dp83902a_poll(void);
 
 #define IEEE_8023_MAX_FRAME	1518	/* Largest possible ethernet frame */
 #define IEEE_8023_MIN_FRAME	64	/* Smallest possible ethernet frame */
+
+/* Functions */
+int get_prom(u8* mac_addr, u8* base_addr);
+
 #endif /* __NE2000_BASE_H__ */
diff --git a/drivers/net/netarm_eth.c b/drivers/net/netarm_eth.c
index c011809b6..c9e324ee2 100644
--- a/drivers/net/netarm_eth.c
+++ b/drivers/net/netarm_eth.c
@@ -56,7 +56,7 @@ static void na_mii_write (int reg, int value)
 	int mii_addr;
 
 	/* Select register */
-	mii_addr = CFG_ETH_PHY_ADDR + reg;
+	mii_addr = CONFIG_SYS_ETH_PHY_ADDR + reg;
 	SET_EADDR (NETARM_ETH_MII_ADDR, mii_addr);
 	/* Write value */
 	SET_EADDR (NETARM_ETH_MII_WRITE, value);
@@ -68,7 +68,7 @@ static unsigned int na_mii_read (int reg)
 	int mii_addr, val;
 
 	/* Select register */
-	mii_addr = CFG_ETH_PHY_ADDR + reg;
+	mii_addr = CONFIG_SYS_ETH_PHY_ADDR + reg;
 	SET_EADDR (NETARM_ETH_MII_ADDR, mii_addr);
 	/* do one management cycle */
 	SET_EADDR (NETARM_ETH_MII_CMD,
diff --git a/drivers/net/ns7520_eth.c b/drivers/net/ns7520_eth.c
index e19c22325..c28726e69 100644
--- a/drivers/net/ns7520_eth.c
+++ b/drivers/net/ns7520_eth.c
@@ -86,8 +86,8 @@ static int nDebugLvl = DEBUG_ERROR_CRIT;
 # define ASSERT(expr, func)
 #endif				/* DEBUG */
 
-#define NS7520_MII_NEG_DELAY		(5*CFG_HZ)	/* in s */
-#define TX_TIMEOUT			(5*CFG_HZ)	/* in s */
+#define NS7520_MII_NEG_DELAY		(5*CONFIG_SYS_HZ)	/* in s */
+#define TX_TIMEOUT			(5*CONFIG_SYS_HZ)	/* in s */
 #define RX_STALL_WORKAROUND_CNT 100
 
 static int ns7520_eth_reset(void);
diff --git a/drivers/net/ns8382x.c b/drivers/net/ns8382x.c
index bb5843815..198f73dee 100644
--- a/drivers/net/ns8382x.c
+++ b/drivers/net/ns8382x.c
@@ -53,6 +53,7 @@
 #include <common.h>
 #include <malloc.h>
 #include <net.h>
+#include <netdev.h>
 #include <asm/io.h>
 #include <pci.h>
 
@@ -444,7 +445,7 @@ ns8382x_initialize(bd_t * bis)
 	Read and write MII registers using software-generated serial MDIO
 	protocol.  See the MII specifications or DP83840A data sheet for details.
 
-	The maximum data clock rate is 2.5 Mhz.  To meet minimum timing we
+	The maximum data clock rate is 2.5 MHz.  To meet minimum timing we
 	must flush writes to the PCI bus with a PCI read. */
 #define mdio_delay(mdio_addr) INL(dev, mdio_addr)
 
diff --git a/drivers/net/ns9750_eth.c b/drivers/net/ns9750_eth.c
index cade831ac..d4901b411 100644
--- a/drivers/net/ns9750_eth.c
+++ b/drivers/net/ns9750_eth.c
@@ -90,8 +90,8 @@ static int nDebugLvl = DEBUG_ERROR_CRIT;
 # define ASSERT(expr, func)
 #endif /* DEBUG */
 
-#define NS9750_MII_NEG_DELAY		(5*CFG_HZ) /* in s */
-#define TX_TIMEOUT			(5*CFG_HZ) /* in s */
+#define NS9750_MII_NEG_DELAY		(5*CONFIG_SYS_HZ) /* in s */
+#define TX_TIMEOUT			(5*CONFIG_SYS_HZ) /* in s */
 
 /* @TODO move it to eeprom.h */
 #define FS_EEPROM_AUTONEG_MASK		0x7
diff --git a/drivers/net/pcnet.c b/drivers/net/pcnet.c
index a4f021410..99b69429e 100644
--- a/drivers/net/pcnet.c
+++ b/drivers/net/pcnet.c
@@ -26,6 +26,7 @@
 #include <common.h>
 #include <malloc.h>
 #include <net.h>
+#include <netdev.h>
 #include <asm/io.h>
 #include <pci.h>
 
diff --git a/drivers/net/phy/miiphybb.c b/drivers/net/phy/miiphybb.c
index 6446012f9..e3c163a34 100644
--- a/drivers/net/phy/miiphybb.c
+++ b/drivers/net/phy/miiphybb.c
@@ -39,7 +39,7 @@ static void miiphy_pre (char read, unsigned char addr, unsigned char reg)
 {
 	int j;			/* counter */
 #if !(defined(CONFIG_EP8248) || defined(CONFIG_EP82XXM))
-	volatile ioport_t *iop = ioport_addr ((immap_t *) CFG_IMMR, MDIO_PORT);
+	volatile ioport_t *iop = ioport_addr ((immap_t *) CONFIG_SYS_IMMR, MDIO_PORT);
 #endif
 
 	/*
@@ -124,7 +124,7 @@ int bb_miiphy_read (char *devname, unsigned char addr,
 	short rdreg;		/* register working value */
 	int j;			/* counter */
 #if !(defined(CONFIG_EP8248) || defined(CONFIG_EP82XXM))
-	volatile ioport_t *iop = ioport_addr ((immap_t *) CFG_IMMR, MDIO_PORT);
+	volatile ioport_t *iop = ioport_addr ((immap_t *) CONFIG_SYS_IMMR, MDIO_PORT);
 #endif
 
 	miiphy_pre (1, addr, reg);
@@ -191,7 +191,7 @@ int bb_miiphy_write (char *devname, unsigned char addr,
 {
 	int j;			/* counter */
 #if !(defined(CONFIG_EP8248) || defined(CONFIG_EP82XXM))
-	volatile ioport_t *iop = ioport_addr ((immap_t *) CFG_IMMR, MDIO_PORT);
+	volatile ioport_t *iop = ioport_addr ((immap_t *) CONFIG_SYS_IMMR, MDIO_PORT);
 #endif
 
 	miiphy_pre (0, addr, reg);
diff --git a/drivers/net/plb2800_eth.c b/drivers/net/plb2800_eth.c
index dad842c72..d799c7382 100644
--- a/drivers/net/plb2800_eth.c
+++ b/drivers/net/plb2800_eth.c
@@ -26,6 +26,7 @@
 #include <common.h>
 #include <malloc.h>
 #include <net.h>
+#include <netdev.h>
 #include <asm/addrspace.h>
 
 
@@ -105,7 +106,7 @@ int plb2800_eth_initialize(bd_t * bis)
 	if (!(dev = (struct eth_device *) malloc (sizeof *dev)))
 	{
 		printf("Failed to allocate memory\n");
-		return 0;
+		return -1;
 	}
 	memset(dev, 0, sizeof(*dev));
 
@@ -140,7 +141,7 @@ int plb2800_eth_initialize(bd_t * bis)
 	printf("Leaving plb2800_eth_initialize()\n");
 #endif
 
-	return 1;
+	return 0;
 }
 
 static int plb2800_eth_init(struct eth_device *dev, bd_t * bis)
diff --git a/drivers/net/rtl8139.c b/drivers/net/rtl8139.c
index 4fd20ac4f..db8a727c8 100644
--- a/drivers/net/rtl8139.c
+++ b/drivers/net/rtl8139.c
@@ -74,6 +74,7 @@
 #include <common.h>
 #include <malloc.h>
 #include <net.h>
+#include <netdev.h>
 #include <asm/io.h>
 #include <pci.h>
 
@@ -286,7 +287,7 @@ static int rtl8139_probe(struct eth_device *dev, bd_t *bis)
 
 /*
 	Delay between EEPROM clock transitions.
-	No extra delay is needed with 33Mhz PCI, but 66Mhz may change this.
+	No extra delay is needed with 33MHz PCI, but 66MHz may change this.
 */
 
 #define eeprom_delay()	inl(ee_addr)
diff --git a/drivers/net/rtl8169.c b/drivers/net/rtl8169.c
index 7c00926a6..e9f6391b3 100644
--- a/drivers/net/rtl8169.c
+++ b/drivers/net/rtl8169.c
@@ -55,6 +55,7 @@
 #include <common.h>
 #include <malloc.h>
 #include <net.h>
+#include <netdev.h>
 #include <asm/io.h>
 #include <pci.h>
 
diff --git a/drivers/net/sk98lin/h/skdrv1st.h b/drivers/net/sk98lin/h/skdrv1st.h
index af34d7b96..8d372b58d 100644
--- a/drivers/net/sk98lin/h/skdrv1st.h
+++ b/drivers/net/sk98lin/h/skdrv1st.h
@@ -174,7 +174,7 @@ typedef struct s_AC	SK_AC;
 #if 0
 #define SK_TICKS_PER_SEC	HZ
 #else
-#define SK_TICKS_PER_SEC	CFG_HZ
+#define SK_TICKS_PER_SEC	CONFIG_SYS_HZ
 #endif
 
 #define	SK_MEM_MAPPED_IO
diff --git a/drivers/net/sk98lin/h/skgehw.h b/drivers/net/sk98lin/h/skgehw.h
index 52dc83f8b..8aad4425f 100644
--- a/drivers/net/sk98lin/h/skgehw.h
+++ b/drivers/net/sk98lin/h/skgehw.h
@@ -1107,10 +1107,10 @@ extern "C" {
 /*	Values of connector and PMD type comply to SysKonnect internal std */
 
 /*	B2_MAC_CFG	 8 bit	MAC Configuration / Chip Revision */
-#define CFG_CHIP_R_MSK	(0xf<<4)	/* Bit 7.. 4: Chip Revision */
+#define CONFIG_SYS_CHIP_R_MSK	(0xf<<4)	/* Bit 7.. 4: Chip Revision */
 									/* Bit 3.. 2:	reserved */
-#define CFG_DIS_M2_CLK	BIT_1S		/* Disable Clock for 2nd MAC */
-#define CFG_SNG_MAC		BIT_0S		/* MAC Config: 0=2 MACs / 1=1 MAC*/
+#define CONFIG_SYS_DIS_M2_CLK	BIT_1S		/* Disable Clock for 2nd MAC */
+#define CONFIG_SYS_SNG_MAC		BIT_0S		/* MAC Config: 0=2 MACs / 1=1 MAC*/
 
 /*	B2_CHIP_ID	 8 bit	Chip Identification Number */
 #define CHIP_ID_GENESIS	0x0a		/* Chip ID for GENESIS */
diff --git a/drivers/net/sk98lin/skgeinit.c b/drivers/net/sk98lin/skgeinit.c
index ab740c7fc..df63f27e8 100644
--- a/drivers/net/sk98lin/skgeinit.c
+++ b/drivers/net/sk98lin/skgeinit.c
@@ -1882,10 +1882,10 @@ SK_IOC	IoC)		/* IO context */
 
 	/* read number of MACs */
 	SK_IN8(IoC, B2_MAC_CFG, &Byte);
-	pAC->GIni.GIMacsFound = (Byte & CFG_SNG_MAC) ? 1 : 2;
+	pAC->GIni.GIMacsFound = (Byte & CONFIG_SYS_SNG_MAC) ? 1 : 2;
 
 	/* get Chip Revision Number */
-	pAC->GIni.GIChipRev = (SK_U8)((Byte & CFG_CHIP_R_MSK) >> 4);
+	pAC->GIni.GIChipRev = (SK_U8)((Byte & CONFIG_SYS_CHIP_R_MSK) >> 4);
 
 	/* get diff. PCI parameters */
 	SK_IN16(IoC, B0_CTST, &CtrlStat);
diff --git a/drivers/net/sk98lin/u-boot_compat.h b/drivers/net/sk98lin/u-boot_compat.h
index 1e385f8ef..cadf40296 100644
--- a/drivers/net/sk98lin/u-boot_compat.h
+++ b/drivers/net/sk98lin/u-boot_compat.h
@@ -54,7 +54,7 @@
 #define EAGAIN				2
 #define EBUSY				3
 
-#define HZ				CFG_HZ
+#define HZ				CONFIG_SYS_HZ
 
 
 #define printk				printf
diff --git a/drivers/net/sk98lin/uboot_drv.c b/drivers/net/sk98lin/uboot_drv.c
index 205e7d2e9..0199b33fe 100644
--- a/drivers/net/sk98lin/uboot_drv.c
+++ b/drivers/net/sk98lin/uboot_drv.c
@@ -24,6 +24,7 @@
  */
 
 #include <common.h>
+#include <netdev.h>
 
 #include "h/skdrv1st.h"
 #include "h/skdrv2nd.h"
diff --git a/drivers/net/smc91111.c b/drivers/net/smc91111.c
index e8b235b4a..82abb0201 100644
--- a/drivers/net/smc91111.c
+++ b/drivers/net/smc91111.c
@@ -383,7 +383,7 @@ static void smc_write_phy_register(byte phyreg, word phydata);
 
 static int poll4int (byte mask, int timeout)
 {
-	int tmo = get_timer (0) + timeout * CFG_HZ;
+	int tmo = get_timer (0) + timeout * CONFIG_SYS_HZ;
 	int is_timeout = 0;
 	word old_bank = SMC_inw (BSR_REG);
 
diff --git a/drivers/net/smc911x.c b/drivers/net/smc911x.c
index 0fff82080..648c94cbb 100644
--- a/drivers/net/smc911x.c
+++ b/drivers/net/smc911x.c
@@ -57,6 +57,11 @@ static inline void reg_write(u32 addr, u32 val)
 #error "SMC911X: undefined bus width"
 #endif /* CONFIG_DRIVER_SMC911X_16_BIT */
 
+u32 pkt_data_pull(u32 addr) \
+	__attribute__ ((weak, alias ("reg_read")));
+void pkt_data_push(u32 addr, u32 val) \
+	__attribute__ ((weak, alias ("reg_write")));
+
 #define mdelay(n)       udelay((n)*1000)
 
 /* Below are the register offsets and bit definitions
@@ -641,7 +646,7 @@ int eth_send(volatile void *packet, int length)
 	tmplen = (length + 3) / 4;
 
 	while (tmplen--)
-		reg_write(TX_DATA_FIFO, *data++);
+		pkt_data_push(TX_DATA_FIFO, *data++);
 
 	/* wait for transmission */
 	while (!((reg_read(TX_FIFO_INF) & TX_FIFO_INF_TSUSED) >> 16));
@@ -684,7 +689,7 @@ int eth_rx(void)
 
 		tmplen = (pktlen + 2+ 3) / 4;
 		while (tmplen--)
-			*data++ = reg_read(RX_DATA_FIFO);
+			*data++ = pkt_data_pull(RX_DATA_FIFO);
 
 		if (status & RX_STS_ES)
 			printf(DRIVERNAME
diff --git a/drivers/net/tigon3.c b/drivers/net/tigon3.c
index ab448b0f8..e4e004eed 100644
--- a/drivers/net/tigon3.c
+++ b/drivers/net/tigon3.c
@@ -2247,7 +2247,7 @@ LM_STATUS LM_ResetAdapter (PLM_DEVICE_BLOCK pDevice)
 	REG_WR (pDevice, Grc.Mode, Value32);
 
 	/* Setup the timer prescalar register. */
-	REG_WR (pDevice, Grc.MiscCfg, 65 << 1);	/* Clock is alwasy 66Mhz. */
+	REG_WR (pDevice, Grc.MiscCfg, 65 << 1);	/* Clock is alwasy 66MHz. */
 
 	/* Set up the MBUF pool base address and size. */
 	REG_WR (pDevice, BufMgr.MbufPoolAddr, pDevice->MbufBase);
diff --git a/drivers/net/tsec.c b/drivers/net/tsec.c
index 6e0f2c6fd..fbc9a6dd0 100644
--- a/drivers/net/tsec.c
+++ b/drivers/net/tsec.c
@@ -16,8 +16,8 @@
 #include <malloc.h>
 #include <net.h>
 #include <command.h>
+#include <tsec.h>
 
-#include "tsec.h"
 #include "miiphy.h"
 
 DECLARE_GLOBAL_DATA_PTR;
@@ -32,69 +32,12 @@ typedef volatile struct rtxbd {
 	rxbd8_t rxbd[PKTBUFSRX];
 } RTXBD;
 
-struct tsec_info_struct {
-	unsigned int phyaddr;
-	u32 flags;
-	unsigned int phyregidx;
-};
-
-/* The tsec_info structure contains 3 values which the
- * driver uses to determine how to operate a given ethernet
- * device. The information needed is:
- *  phyaddr - The address of the PHY which is attached to
- *	the given device.
- *
- *  flags - This variable indicates whether the device
- *	supports gigabit speed ethernet, and whether it should be
- *	in reduced mode.
- *
- *  phyregidx - This variable specifies which ethernet device
- *	controls the MII Management registers which are connected
- *	to the PHY.  For now, only TSEC1 (index 0) has
- *	access to the PHYs, so all of the entries have "0".
- *
- * The values specified in the table are taken from the board's
- * config file in include/configs/.  When implementing a new
- * board with ethernet capability, it is necessary to define:
- *   TSECn_PHY_ADDR
- *   TSECn_PHYIDX
- *
- * for n = 1,2,3, etc.  And for FEC:
- *   FEC_PHY_ADDR
- *   FEC_PHYIDX
- */
-static struct tsec_info_struct tsec_info[] = {
-#ifdef CONFIG_TSEC1
-	{TSEC1_PHY_ADDR, TSEC1_FLAGS, TSEC1_PHYIDX},
-#else
-	{0, 0, 0},
-#endif
-#ifdef CONFIG_TSEC2
-	{TSEC2_PHY_ADDR, TSEC2_FLAGS, TSEC2_PHYIDX},
-#else
-	{0, 0, 0},
-#endif
-#ifdef CONFIG_MPC85XX_FEC
-	{FEC_PHY_ADDR, FEC_FLAGS, FEC_PHYIDX},
-#else
-#ifdef CONFIG_TSEC3
-	{TSEC3_PHY_ADDR, TSEC3_FLAGS, TSEC3_PHYIDX},
-#else
-	{0, 0, 0},
-#endif
-#ifdef CONFIG_TSEC4
-	{TSEC4_PHY_ADDR, TSEC4_FLAGS, TSEC4_PHYIDX},
-#else
-	{0, 0, 0},
-#endif	/* CONFIG_TSEC4 */
-#endif	/* CONFIG_MPC85XX_FEC */
-};
-
-#define MAXCONTROLLERS	(4)
+#define MAXCONTROLLERS	(8)
 
 static int relocated = 0;
 
 static struct tsec_private *privlist[MAXCONTROLLERS];
+static int num_tsecs = 0;
 
 #ifdef __GNUC__
 static RTXBD rtx __attribute__ ((aligned(8)));
@@ -127,10 +70,51 @@ static int tsec_miiphy_read(char *devname, unsigned char addr,
 static int tsec_mcast_addr (struct eth_device *dev, u8 mcast_mac, u8 set);
 #endif
 
+/* Default initializations for TSEC controllers. */
+
+static struct tsec_info_struct tsec_info[] = {
+#ifdef CONFIG_TSEC1
+	STD_TSEC_INFO(1),	/* TSEC1 */
+#endif
+#ifdef CONFIG_TSEC2
+	STD_TSEC_INFO(2),	/* TSEC2 */
+#endif
+#ifdef CONFIG_MPC85XX_FEC
+	{
+		.regs = (tsec_t *)(TSEC_BASE_ADDR + 0x2000),
+		.miiregs = (tsec_t *)(TSEC_BASE_ADDR),
+		.devname = CONFIG_MPC85XX_FEC_NAME,
+		.phyaddr = FEC_PHY_ADDR,
+		.flags = FEC_FLAGS
+	},			/* FEC */
+#endif
+#ifdef CONFIG_TSEC3
+	STD_TSEC_INFO(3),	/* TSEC3 */
+#endif
+#ifdef CONFIG_TSEC4
+	STD_TSEC_INFO(4),	/* TSEC4 */
+#endif
+};
+
+int tsec_eth_init(bd_t *bis, struct tsec_info_struct *tsecs, int num)
+{
+	int i;
+
+	for (i = 0; i < num; i++)
+		tsec_initialize(bis, &tsecs[i]);
+
+	return 0;
+}
+
+int tsec_standard_init(bd_t *bis)
+{
+	return tsec_eth_init(bis, tsec_info, ARRAY_SIZE(tsec_info));
+}
+
 /* Initialize device structure. Returns success if PHY
  * initialization succeeded (i.e. if it recognizes the PHY)
  */
-int tsec_initialize(bd_t * bis, int index, char *devname)
+int tsec_initialize(bd_t * bis, struct tsec_info_struct *tsec_info)
 {
 	struct eth_device *dev;
 	int i;
@@ -148,16 +132,14 @@ int tsec_initialize(bd_t * bis, int index, char *devname)
 	if (NULL == priv)
 		return 0;
 
-	privlist[index] = priv;
-	priv->regs = (volatile tsec_t *)(TSEC_BASE_ADDR + index * TSEC_SIZE);
-	priv->phyregs = (volatile tsec_t *)(TSEC_BASE_ADDR +
-					    tsec_info[index].phyregidx *
-					    TSEC_SIZE);
+	privlist[num_tsecs++] = priv;
+	priv->regs = tsec_info->regs;
+	priv->phyregs = tsec_info->miiregs;
 
-	priv->phyaddr = tsec_info[index].phyaddr;
-	priv->flags = tsec_info[index].flags;
+	priv->phyaddr = tsec_info->phyaddr;
+	priv->flags = tsec_info->flags;
 
-	sprintf(dev->name, devname);
+	sprintf(dev->name, tsec_info->devname);
 	dev->iobase = 0;
 	dev->priv = priv;
 	dev->init = tsec_init;
@@ -232,64 +214,84 @@ int tsec_init(struct eth_device *dev, bd_t * bd)
 
 	/* If there's no link, fail */
 	return (priv->link ? 0 : -1);
-
 }
 
-/* Write value to the device's PHY through the registers
- * specified in priv, modifying the register specified in regnum.
- * It will wait for the write to be done (or for a timeout to
- * expire) before exiting
- */
-void write_any_phy_reg(struct tsec_private *priv, uint phyid, uint regnum, uint value)
+/* Writes the given phy's reg with value, using the specified MDIO regs */
+static void tsec_local_mdio_write(volatile tsec_t *phyregs, uint addr,
+		uint reg, uint value)
 {
-	volatile tsec_t *regbase = priv->phyregs;
 	int timeout = 1000000;
 
-	regbase->miimadd = (phyid << 8) | regnum;
-	regbase->miimcon = value;
+	phyregs->miimadd = (addr << 8) | reg;
+	phyregs->miimcon = value;
 	asm("sync");
 
 	timeout = 1000000;
-	while ((regbase->miimind & MIIMIND_BUSY) && timeout--) ;
+	while ((phyregs->miimind & MIIMIND_BUSY) && timeout--) ;
 }
 
-/* #define to provide old write_phy_reg functionality without duplicating code */
-#define write_phy_reg(priv, regnum, value) write_any_phy_reg(priv,priv->phyaddr,regnum,value)
+
+/* Provide the default behavior of writing the PHY of this ethernet device */
+#define write_phy_reg(priv, regnum, value) tsec_local_mdio_write(priv->phyregs,priv->phyaddr,regnum,value)
 
 /* Reads register regnum on the device's PHY through the
- * registers specified in priv.	 It lowers and raises the read
+ * specified registers.	 It lowers and raises the read
  * command, and waits for the data to become valid (miimind
  * notvalid bit cleared), and the bus to cease activity (miimind
  * busy bit cleared), and then returns the value
  */
-uint read_any_phy_reg(struct tsec_private *priv, uint phyid, uint regnum)
+uint tsec_local_mdio_read(volatile tsec_t *phyregs, uint phyid, uint regnum)
 {
 	uint value;
-	volatile tsec_t *regbase = priv->phyregs;
 
 	/* Put the address of the phy, and the register
 	 * number into MIIMADD */
-	regbase->miimadd = (phyid << 8) | regnum;
+	phyregs->miimadd = (phyid << 8) | regnum;
 
 	/* Clear the command register, and wait */
-	regbase->miimcom = 0;
+	phyregs->miimcom = 0;
 	asm("sync");
 
 	/* Initiate a read command, and wait */
-	regbase->miimcom = MIIM_READ_COMMAND;
+	phyregs->miimcom = MIIM_READ_COMMAND;
 	asm("sync");
 
 	/* Wait for the the indication that the read is done */
-	while ((regbase->miimind & (MIIMIND_NOTVALID | MIIMIND_BUSY))) ;
+	while ((phyregs->miimind & (MIIMIND_NOTVALID | MIIMIND_BUSY))) ;
 
 	/* Grab the value read from the PHY */
-	value = regbase->miimstat;
+	value = phyregs->miimstat;
 
 	return value;
 }
 
 /* #define to provide old read_phy_reg functionality without duplicating code */
-#define read_phy_reg(priv,regnum) read_any_phy_reg(priv,priv->phyaddr,regnum)
+#define read_phy_reg(priv,regnum) tsec_local_mdio_read(priv->phyregs,priv->phyaddr,regnum)
+
+#define TBIANA_SETTINGS ( \
+		TBIANA_ASYMMETRIC_PAUSE \
+		| TBIANA_SYMMETRIC_PAUSE \
+		| TBIANA_FULL_DUPLEX \
+		)
+
+#define TBICR_SETTINGS ( \
+		TBICR_PHY_RESET \
+		| TBICR_ANEG_ENABLE \
+		| TBICR_FULL_DUPLEX \
+		| TBICR_SPEED1_SET \
+		)
+/* Configure the TBI for SGMII operation */
+static void tsec_configure_serdes(struct tsec_private *priv)
+{
+	/* Access TBI PHY registers at given TSEC register offset as opposed to the
+	 * register offset used for external PHY accesses */
+	tsec_local_mdio_write(priv->regs, priv->regs->tbipa, TBI_ANA,
+			TBIANA_SETTINGS);
+	tsec_local_mdio_write(priv->regs, priv->regs->tbipa, TBI_TBICON,
+			TBICON_CLK_SELECT);
+	tsec_local_mdio_write(priv->regs, priv->regs->tbipa, TBI_CR,
+			TBICR_SETTINGS);
+}
 
 /* Discover which PHY is attached to the device, and configure it
  * properly.  If the PHY is not recognized, then return 0
@@ -299,12 +301,12 @@ static int init_phy(struct eth_device *dev)
 {
 	struct tsec_private *priv = (struct tsec_private *)dev->priv;
 	struct phy_info *curphy;
-	volatile tsec_t *regs = (volatile tsec_t *)(TSEC_BASE_ADDR);
+	volatile tsec_t *phyregs = priv->phyregs;
+	volatile tsec_t *regs = priv->regs;
 
 	/* Assign a Physical address to the TBI */
-	regs->tbipa = CFG_TBIPA_VALUE;
-	regs = (volatile tsec_t *)(TSEC_BASE_ADDR + TSEC_SIZE);
-	regs->tbipa = CFG_TBIPA_VALUE;
+	regs->tbipa = CONFIG_SYS_TBIPA_VALUE;
+	phyregs->tbipa = CONFIG_SYS_TBIPA_VALUE;
 	asm("sync");
 
 	/* Reset MII (due to new addresses) */
@@ -328,6 +330,9 @@ static int init_phy(struct eth_device *dev)
 		return 0;
 	}
 
+	if (regs->ecntrl & ECNTRL_SGMII_MODE)
+		tsec_configure_serdes(priv);
+
 	priv->phyinfo = curphy;
 
 	phy_run_commands(priv, priv->phyinfo->config);
@@ -1157,6 +1162,57 @@ struct phy_info phy_info_M88E1118 = {
 		},
 };
 
+/*
+ *  Since to access LED register we need do switch the page, we
+ * do LED configuring in the miim_read-like function as follows
+ */
+uint mii_88E1121_set_led (uint mii_reg, struct tsec_private *priv)
+{
+	uint pg;
+
+	/* Switch the page to access the led register */
+	pg = read_phy_reg(priv, MIIM_88E1121_PHY_PAGE);
+	write_phy_reg(priv, MIIM_88E1121_PHY_PAGE, MIIM_88E1121_PHY_LED_PAGE);
+
+	/* Configure leds */
+	write_phy_reg(priv, MIIM_88E1121_PHY_LED_CTRL,
+		      MIIM_88E1121_PHY_LED_DEF);
+
+	/* Restore the page pointer */
+	write_phy_reg(priv, MIIM_88E1121_PHY_PAGE, pg);
+	return 0;
+}
+
+struct phy_info phy_info_M88E1121R = {
+	0x01410cb,
+	"Marvell 88E1121R",
+	4,
+	(struct phy_cmd[]){	/* config */
+			   /* Reset and configure the PHY */
+			   {MIIM_CONTROL, MIIM_CONTROL_RESET, NULL},
+			   {MIIM_GBIT_CONTROL, MIIM_GBIT_CONTROL_INIT, NULL},
+			   {MIIM_ANAR, MIIM_ANAR_INIT, NULL},
+			   /* Configure leds */
+			   {MIIM_88E1121_PHY_LED_CTRL, miim_read,
+			    &mii_88E1121_set_led},
+			   {MIIM_CONTROL, MIIM_CONTROL_INIT, &mii_cr_init},
+			   /* Disable IRQs and de-assert interrupt */
+			   {MIIM_88E1121_PHY_IRQ_EN, 0, NULL},
+			   {MIIM_88E1121_PHY_IRQ_STATUS, miim_read, NULL},
+			   {miim_end,}
+			   },
+	(struct phy_cmd[]){	/* startup */
+			   /* Status is read once to clear old link state */
+			   {MIIM_STATUS, miim_read, NULL},
+			   {MIIM_STATUS, miim_read, &mii_parse_sr},
+			   {MIIM_STATUS, miim_read, &mii_parse_link},
+			   {miim_end,}
+			   },
+	(struct phy_cmd[]){	/* shutdown */
+			   {miim_end,}
+			   },
+};
+
 static unsigned int m88e1145_setmode(uint mii_reg, struct tsec_private *priv)
 {
 	uint mii_data = read_phy_reg(priv, mii_reg);
@@ -1304,15 +1360,17 @@ struct phy_info phy_info_VSC8601 = {
 				/* Override PHY config settings */
 				/* Configure some basic stuff */
 				{MIIM_CONTROL, MIIM_CONTROL_INIT, &mii_cr_init},
-#ifdef CFG_VSC8601_SKEWFIX
+#ifdef CONFIG_SYS_VSC8601_SKEWFIX
 				{MIIM_VSC8601_EPHY_CON,MIIM_VSC8601_EPHY_CON_INIT_SKEW,NULL},
-#if defined(CFG_VSC8601_SKEW_TX) && defined(CFG_VSC8601_SKEW_RX)
+#if defined(CONFIG_SYS_VSC8601_SKEW_TX) && defined(CONFIG_SYS_VSC8601_SKEW_RX)
 				{MIIM_EXT_PAGE_ACCESS,1,NULL},
-#define VSC8101_SKEW	(CFG_VSC8601_SKEW_TX<<14)|(CFG_VSC8601_SKEW_RX<<12)
+#define VSC8101_SKEW	(CONFIG_SYS_VSC8601_SKEW_TX<<14)|(CONFIG_SYS_VSC8601_SKEW_RX<<12)
 				{MIIM_VSC8601_SKEW_CTRL,VSC8101_SKEW,NULL},
 				{MIIM_EXT_PAGE_ACCESS,0,NULL},
 #endif
 #endif
+				{MIIM_ANAR, MIIM_ANAR_INIT, NULL},
+				{MIIM_CONTROL, MIIM_CONTROL_RESTART, &mii_cr_init},
 				{miim_end,}
 				 },
 		(struct phy_cmd[]){     /* startup */
@@ -1522,6 +1580,7 @@ struct phy_info *phy_info[] = {
 	&phy_info_M88E1011S,
 	&phy_info_M88E1111S,
 	&phy_info_M88E1118,
+	&phy_info_M88E1121R,
 	&phy_info_M88E1145,
 	&phy_info_M88E1149S,
 	&phy_info_dm9161,
@@ -1670,7 +1729,7 @@ static int tsec_miiphy_read(char *devname, unsigned char addr,
 		return -1;
 	}
 
-	ret = (unsigned short)read_any_phy_reg(priv, addr, reg);
+	ret = (unsigned short)tsec_local_mdio_read(priv->phyregs, addr, reg);
 	*value = ret;
 
 	return 0;
@@ -1692,7 +1751,7 @@ static int tsec_miiphy_write(char *devname, unsigned char addr,
 		return -1;
 	}
 
-	write_any_phy_reg(priv, addr, reg, value);
+	tsec_local_mdio_write(priv->phyregs, addr, reg, value);
 
 	return 0;
 }
diff --git a/drivers/net/tsi108_eth.c b/drivers/net/tsi108_eth.c
index 2534097df..079354aaf 100644
--- a/drivers/net/tsi108_eth.c
+++ b/drivers/net/tsi108_eth.c
@@ -34,6 +34,7 @@
 #include <common.h>
 #include <malloc.h>
 #include <net.h>
+#include <netdev.h>
 #include <asm/cache.h>
 
 #ifdef DEBUG
@@ -53,7 +54,7 @@ printf ("%s %d: " fmt, __FUNCTION__, __LINE__, ##args)
 #define RX_PRINT_ERRORS
 #define TX_PRINT_ERRORS
 
-#define ETH_BASE	(CFG_TSI108_CSR_BASE + 0x6000)
+#define ETH_BASE	(CONFIG_SYS_TSI108_CSR_BASE + 0x6000)
 
 #define ETH_PORT_OFFSET	0x400
 
diff --git a/drivers/net/uli526x.c b/drivers/net/uli526x.c
index d87638c13..9ea5ac201 100644
--- a/drivers/net/uli526x.c
+++ b/drivers/net/uli526x.c
@@ -16,6 +16,7 @@
 #include <common.h>
 #include <malloc.h>
 #include <net.h>
+#include <netdev.h>
 #include <asm/io.h>
 #include <pci.h>
 #include <miiphy.h>
diff --git a/drivers/net/vsc7385.c b/drivers/net/vsc7385.c
index 4e7259fd9..ada42c41f 100644
--- a/drivers/net/vsc7385.c
+++ b/drivers/net/vsc7385.c
@@ -35,13 +35,13 @@ int vsc7385_upload_firmware(void *firmware, unsigned int size)
 	u8 *fw = firmware;
 	unsigned int i;
 
-	u32 *gloreset = (u32 *) (CFG_VSC7385_BASE + 0x1c050);
-	u32 *icpu_ctrl = (u32 *) (CFG_VSC7385_BASE + 0x1c040);
-	u32 *icpu_addr = (u32 *) (CFG_VSC7385_BASE + 0x1c044);
-	u32 *icpu_data = (u32 *) (CFG_VSC7385_BASE + 0x1c048);
-	u32 *icpu_rom_map = (u32 *) (CFG_VSC7385_BASE + 0x1c070);
+	u32 *gloreset = (u32 *) (CONFIG_SYS_VSC7385_BASE + 0x1c050);
+	u32 *icpu_ctrl = (u32 *) (CONFIG_SYS_VSC7385_BASE + 0x1c040);
+	u32 *icpu_addr = (u32 *) (CONFIG_SYS_VSC7385_BASE + 0x1c044);
+	u32 *icpu_data = (u32 *) (CONFIG_SYS_VSC7385_BASE + 0x1c048);
+	u32 *icpu_rom_map = (u32 *) (CONFIG_SYS_VSC7385_BASE + 0x1c070);
 #ifdef DEBUG
-	u32 *chipid = (u32 *) (CFG_VSC7385_BASE + 0x1c060);
+	u32 *chipid = (u32 *) (CONFIG_SYS_VSC7385_BASE + 0x1c060);
 #endif
 
 	out_be32(gloreset, 3);
diff --git a/drivers/net/xilinx_emaclite.c b/drivers/net/xilinx_emaclite.c
index 9ba4096e8..0e96ef184 100644
--- a/drivers/net/xilinx_emaclite.c
+++ b/drivers/net/xilinx_emaclite.c
@@ -70,10 +70,10 @@ typedef struct {
 
 static xemaclite emaclite;
 
-static char etherrxbuff[PKTSIZE_ALIGN/4]; /* Receive buffer */
+static u32 etherrxbuff[PKTSIZE_ALIGN/4]; /* Receive buffer */
 
 /* hardcoded MAC address for the Xilinx EMAC Core when env is nowhere*/
-#ifdef CFG_ENV_IS_NOWHERE
+#ifdef CONFIG_ENV_IS_NOWHERE
 static u8 emacaddr[ENET_ADDR_LENGTH] = { 0x00, 0x0a, 0x35, 0x00, 0x22, 0x01 };
 #else
 static u8 emacaddr[ENET_ADDR_LENGTH];
diff --git a/drivers/pci/fsl_pci_init.c b/drivers/pci/fsl_pci_init.c
index bb2813f12..1db42fd8d 100644
--- a/drivers/pci/fsl_pci_init.c
+++ b/drivers/pci/fsl_pci_init.c
@@ -18,6 +18,8 @@
 
 #include <common.h>
 
+DECLARE_GLOBAL_DATA_PTR;
+
 /*
  * PCI/PCIE Controller initialization for mpc85xx/mpc86xx soc's
  *
@@ -39,10 +41,94 @@ void pciauto_prescan_setup_bridge(struct pci_controller *hose,
 				pci_dev_t dev, int sub_bus);
 void pciauto_postscan_setup_bridge(struct pci_controller *hose,
 				pci_dev_t dev, int sub_bus);
-
 void pciauto_config_init(struct pci_controller *hose);
-void
-fsl_pci_init(struct pci_controller *hose)
+
+#ifndef CONFIG_SYS_PCI_MEMORY_BUS
+#define CONFIG_SYS_PCI_MEMORY_BUS 0
+#endif
+
+#ifndef CONFIG_SYS_PCI_MEMORY_PHYS
+#define CONFIG_SYS_PCI_MEMORY_PHYS 0
+#endif
+
+#if defined(CONFIG_SYS_PCI_64BIT) && !defined(CONFIG_SYS_PCI64_MEMORY_BUS)
+#define CONFIG_SYS_PCI64_MEMORY_BUS (64ull*1024*1024*1024)
+#endif
+
+int fsl_pci_setup_inbound_windows(struct pci_region *r)
+{
+	struct pci_region *rgn_base = r;
+	u64 sz = min((u64)gd->ram_size, (1ull << 32) - 1);
+
+	phys_addr_t phys_start = CONFIG_SYS_PCI_MEMORY_PHYS;
+	pci_addr_t bus_start = CONFIG_SYS_PCI_MEMORY_BUS;
+	pci_size_t pci_sz = 1ull << __ilog2_u64(sz);
+
+	debug ("R0 bus_start: %llx phys_start: %llx size: %llx\n",
+		(u64)bus_start, (u64)phys_start, (u64)pci_sz);
+	pci_set_region(r++, bus_start, phys_start, pci_sz,
+			PCI_REGION_MEM | PCI_REGION_MEMORY |
+			PCI_REGION_PREFETCH);
+
+	sz -= pci_sz;
+	bus_start += pci_sz;
+	phys_start += pci_sz;
+
+	pci_sz = 1ull << __ilog2_u64(sz);
+	if (sz) {
+		debug ("R1 bus_start: %llx phys_start: %llx size: %llx\n",
+			(u64)bus_start, (u64)phys_start, (u64)pci_sz);
+		pci_set_region(r++, bus_start, phys_start, pci_sz,
+				PCI_REGION_MEM | PCI_REGION_MEMORY |
+				PCI_REGION_PREFETCH);
+		sz -= pci_sz;
+		bus_start += pci_sz;
+		phys_start += pci_sz;
+	}
+
+#if defined(CONFIG_PHYS_64BIT) && defined(CONFIG_SYS_PCI_64BIT)
+	/*
+	 * On 64-bit capable systems, set up a mapping for all of DRAM
+	 * in high pci address space.
+	 */
+	pci_sz = 1ull << __ilog2_u64(gd->ram_size);
+	/* round up to the next largest power of two */
+	if (gd->ram_size > pci_sz)
+		pci_sz = 1ull << (__ilog2_u64(gd->ram_size) + 1);
+	debug ("R64 bus_start: %llx phys_start: %llx size: %llx\n",
+		(u64)CONFIG_SYS_PCI64_MEMORY_BUS,
+		(u64)CONFIG_SYS_PCI_MEMORY_PHYS,
+		(u64)pci_sz);
+	pci_set_region(r++,
+			CONFIG_SYS_PCI64_MEMORY_BUS,
+			CONFIG_SYS_PCI_MEMORY_PHYS,
+			pci_sz,
+			PCI_REGION_MEM | PCI_REGION_MEMORY |
+			PCI_REGION_PREFETCH);
+#else
+	pci_sz = 1ull << __ilog2_u64(sz);
+	if (sz) {
+		debug ("R2 bus_start: %llx phys_start: %llx size: %llx\n",
+			(u64)bus_start, (u64)phys_start, (u64)pci_sz);
+		pci_set_region(r++, bus_start, phys_start, pci_sz,
+				PCI_REGION_MEM | PCI_REGION_MEMORY |
+				PCI_REGION_PREFETCH);
+		sz -= pci_sz;
+		bus_start += pci_sz;
+		phys_start += pci_sz;
+	}
+#endif
+
+#ifdef CONFIG_PHYS_64BIT
+	if (sz && (((u64)gd->ram_size) < (1ull << 32)))
+		printf("Was not able to map all of memory via "
+			"inbound windows -- %lld remaining\n", sz);
+#endif
+
+	return r - rgn_base;
+}
+
+void fsl_pci_init(struct pci_controller *hose)
 {
 	u16 temp16;
 	u32 temp32;
@@ -65,25 +151,36 @@ fsl_pci_init(struct pci_controller *hose)
 #endif
 
 	for (r=0; r<hose->region_count; r++) {
+		u32 sz = (__ilog2_u64((u64)hose->regions[r].size) - 1);
 		if (hose->regions[r].flags & PCI_REGION_MEMORY) { /* inbound */
-			pi->pitar = (hose->regions[r].bus_start >> 12) & 0x000fffff;
-			pi->piwbar = (hose->regions[r].phys_start >> 12) & 0x000fffff;
+			u32 flag = PIWAR_EN | PIWAR_LOCAL |
+					PIWAR_READ_SNOOP | PIWAR_WRITE_SNOOP;
+			pi->pitar = (hose->regions[r].phys_start >> 12);
+			pi->piwbar = (hose->regions[r].bus_start >> 12);
+#ifdef CONFIG_SYS_PCI_64BIT
+			pi->piwbear = (hose->regions[r].bus_start >> 44);
+#else
 			pi->piwbear = 0;
-			pi->piwar = PIWAR_EN | PIWAR_PF | PIWAR_LOCAL |
-				PIWAR_READ_SNOOP | PIWAR_WRITE_SNOOP |
-				(__ilog2(hose->regions[r].size) - 1);
+#endif
+			if (hose->regions[r].flags & PCI_REGION_PREFETCH)
+				flag |= PIWAR_PF;
+			pi->piwar = flag | sz;
 			pi++;
 			inbound = hose->regions[r].size > 0;
 		} else { /* Outbound */
-			po->powbar = (hose->regions[r].phys_start >> 12) & 0x000fffff;
-			po->potar = (hose->regions[r].bus_start >> 12) & 0x000fffff;
+			po->powbar = (hose->regions[r].phys_start >> 12);
+			po->potar = (hose->regions[r].bus_start >> 12);
+#ifdef CONFIG_SYS_PCI_64BIT
+			po->potear = (hose->regions[r].bus_start >> 44);
+#else
 			po->potear = 0;
+#endif
 			if (hose->regions[r].flags & PCI_REGION_IO)
-				po->powar = POWAR_EN | POWAR_IO_READ | POWAR_IO_WRITE |
-					(__ilog2(hose->regions[r].size) - 1);
+				po->powar = POWAR_EN | sz |
+					POWAR_IO_READ | POWAR_IO_WRITE;
 			else
-				po->powar = POWAR_EN | POWAR_MEM_READ | POWAR_MEM_WRITE |
-					(__ilog2(hose->regions[r].size) - 1);
+				po->powar = POWAR_EN | sz |
+					POWAR_MEM_READ | POWAR_MEM_WRITE;
 			po++;
 		}
 	}
@@ -168,8 +265,21 @@ fsl_pci_init(struct pci_controller *hose)
 	}
 
 #ifndef CONFIG_PCI_NOSCAN
-	printf ("               Scanning PCI bus %02x\n", hose->current_busno);
-	hose->last_busno = pci_hose_scan_bus(hose,hose->current_busno);
+	pci_hose_read_config_byte(hose, dev, PCI_CLASS_PROG, &temp8);
+
+	/* Programming Interface (PCI_CLASS_PROG)
+	 * 0 == pci host or pcie root-complex,
+	 * 1 == pci agent or pcie end-point
+	 */
+	if (!temp8) {
+		printf("               Scanning PCI bus %02x\n",
+			hose->current_busno);
+		hose->last_busno = pci_hose_scan_bus(hose, hose->current_busno);
+	} else {
+		debug("               Not scanning PCI bus %02x. PI=%x\n",
+			hose->current_busno, temp8);
+		hose->last_busno = hose->current_busno;
+	}
 
 	if ( bridge ) { /* update limit regs and subordinate busno */
 		pciauto_postscan_setup_bridge(hose, dev, hose->last_busno);
@@ -195,3 +305,23 @@ fsl_pci_init(struct pci_controller *hose)
 		pci_hose_write_config_word(hose, dev, PCI_SEC_STATUS, 0xffff);
 	}
 }
+
+#ifdef CONFIG_OF_BOARD_SETUP
+#include <libfdt.h>
+#include <fdt_support.h>
+
+void ft_fsl_pci_setup(void *blob, const char *pci_alias,
+			struct pci_controller *hose)
+{
+	int off = fdt_path_offset(blob, pci_alias);
+
+	if (off >= 0) {
+		u32 bus_range[2];
+
+		bus_range[0] = 0;
+		bus_range[1] = hose->last_busno - hose->first_busno;
+		fdt_setprop(blob, off, "bus-range", &bus_range[0], 2*4);
+		fdt_pci_dma_ranges(blob, off, hose);
+	}
+}
+#endif
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index b5eea89e7..e2b05d899 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -157,7 +157,7 @@ pci_dev_t pci_find_devices(struct pci_device_id *ids, int index)
 
 	for (hose = hose_head; hose; hose = hose->next)
 	{
-#ifdef CFG_SCSI_SCAN_BUS_REVERSE
+#ifdef CONFIG_SYS_SCSI_SCAN_BUS_REVERSE
 		for (bus = hose->last_busno; bus >= hose->first_busno; bus--)
 #else
 		for (bus = hose->first_busno; bus <= hose->last_busno; bus++)
@@ -218,12 +218,12 @@ pci_dev_t pci_find_device(unsigned int vendor, unsigned int device, int index)
  *
  */
 
-unsigned long pci_hose_phys_to_bus (struct pci_controller *hose,
+pci_addr_t pci_hose_phys_to_bus (struct pci_controller *hose,
 				    phys_addr_t phys_addr,
 				    unsigned long flags)
 {
 	struct pci_region *res;
-	unsigned long bus_addr;
+	pci_addr_t bus_addr;
 	int i;
 
 	if (!hose) {
@@ -252,7 +252,7 @@ Done:
 }
 
 phys_addr_t pci_hose_bus_to_phys(struct pci_controller* hose,
-				 unsigned long bus_addr,
+				 pci_addr_t bus_addr,
 				 unsigned long flags)
 {
 	struct pci_region *res;
@@ -288,15 +288,17 @@ Done:
 int pci_hose_config_device(struct pci_controller *hose,
 			   pci_dev_t dev,
 			   unsigned long io,
-			   unsigned long mem,
+			   pci_addr_t mem,
 			   unsigned long command)
 {
-	unsigned int bar_response, bar_size, bar_value, old_command;
+	unsigned int bar_response, old_command;
+	pci_addr_t bar_value;
+	pci_size_t bar_size;
 	unsigned char pin;
 	int bar, found_mem64;
 
-	debug ("PCI Config: I/O=0x%lx, Memory=0x%lx, Command=0x%lx\n",
-		io, mem, command);
+	debug ("PCI Config: I/O=0x%lx, Memory=0x%llx, Command=0x%lx\n",
+		io, (u64)mem, command);
 
 	pci_hose_write_config_dword (hose, dev, PCI_COMMAND, 0);
 
@@ -319,10 +321,19 @@ int pci_hose_config_device(struct pci_controller *hose,
 			io = io + bar_size;
 		} else {
 			if ((bar_response & PCI_BASE_ADDRESS_MEM_TYPE_MASK) ==
-				PCI_BASE_ADDRESS_MEM_TYPE_64)
-				found_mem64 = 1;
+				PCI_BASE_ADDRESS_MEM_TYPE_64) {
+				u32 bar_response_upper;
+				u64 bar64;
+				pci_hose_write_config_dword(hose, dev, bar+4, 0xffffffff);
+				pci_hose_read_config_dword(hose, dev, bar+4, &bar_response_upper);
 
-			bar_size = ~(bar_response & PCI_BASE_ADDRESS_MEM_MASK) + 1;
+				bar64 = ((u64)bar_response_upper << 32) | bar_response;
+
+				bar_size = ~(bar64 & PCI_BASE_ADDRESS_MEM_MASK) + 1;
+				found_mem64 = 1;
+			} else {
+				bar_size = (u32)(~(bar_response & PCI_BASE_ADDRESS_MEM_MASK) + 1);
+			}
 
 			/* round up region base address to multiple of size */
 			mem = ((mem - 1) | (bar_size - 1)) + 1;
@@ -332,11 +343,15 @@ int pci_hose_config_device(struct pci_controller *hose,
 		}
 
 		/* Write it out and update our limit */
-		pci_hose_write_config_dword (hose, dev, bar, bar_value);
+		pci_hose_write_config_dword (hose, dev, bar, (u32)bar_value);
 
 		if (found_mem64) {
 			bar += 4;
+#ifdef CONFIG_SYS_PCI_64BIT
+			pci_hose_write_config_dword(hose, dev, bar, (u32)(bar_value>>32));
+#else
 			pci_hose_write_config_dword (hose, dev, bar, 0x00000000);
+#endif
 		}
 	}
 
diff --git a/drivers/pci/pci_auto.c b/drivers/pci/pci_auto.c
index 2acf9bf78..c20b981b8 100644
--- a/drivers/pci/pci_auto.c
+++ b/drivers/pci/pci_auto.c
@@ -26,9 +26,9 @@
 
 #define	PCIAUTO_IDE_MODE_MASK		0x05
 
-/* the user can define CFG_PCI_CACHE_LINE_SIZE to avoid problems */
-#ifndef CFG_PCI_CACHE_LINE_SIZE
-#define CFG_PCI_CACHE_LINE_SIZE	8
+/* the user can define CONFIG_SYS_PCI_CACHE_LINE_SIZE to avoid problems */
+#ifndef CONFIG_SYS_PCI_CACHE_LINE_SIZE
+#define CONFIG_SYS_PCI_CACHE_LINE_SIZE	8
 #endif
 
 /*
@@ -45,14 +45,14 @@ void pciauto_region_init(struct pci_region* res)
 	res->bus_lower = res->bus_start ? res->bus_start : 0x1000;
 }
 
-void pciauto_region_align(struct pci_region *res, unsigned long size)
+void pciauto_region_align(struct pci_region *res, pci_size_t size)
 {
 	res->bus_lower = ((res->bus_lower - 1) | (size - 1)) + 1;
 }
 
-int pciauto_region_allocate(struct pci_region* res, unsigned int size, unsigned int *bar)
+int pciauto_region_allocate(struct pci_region* res, pci_size_t size, pci_addr_t *bar)
 {
-	unsigned long addr;
+	pci_addr_t addr;
 
 	if (!res) {
 		DEBUGF("No resource");
@@ -68,13 +68,13 @@ int pciauto_region_allocate(struct pci_region* res, unsigned int size, unsigned
 
 	res->bus_lower = addr + size;
 
-	DEBUGF("address=0x%lx bus_lower=%x", addr, res->bus_lower);
+	DEBUGF("address=0x%llx bus_lower=0x%llx", (u64)addr, (u64)res->bus_lower);
 
 	*bar = addr;
 	return 0;
 
  error:
-	*bar = 0xffffffff;
+	*bar = (pci_addr_t)-1;
 	return -1;
 }
 
@@ -88,7 +88,9 @@ void pciauto_setup_device(struct pci_controller *hose,
 			  struct pci_region *prefetch,
 			  struct pci_region *io)
 {
-	unsigned int bar_value, bar_response, bar_size;
+	unsigned int bar_response;
+	pci_addr_t bar_value;
+	pci_size_t bar_size;
 	unsigned int cmdstat = 0;
 	struct pci_region *bar_res;
 	int bar, bar_nr = 0;
@@ -114,33 +116,46 @@ void pciauto_setup_device(struct pci_controller *hose,
 				   & 0xffff) + 1;
 			bar_res = io;
 
-			DEBUGF("PCI Autoconfig: BAR %d, I/O, size=0x%x, ", bar_nr, bar_size);
+			DEBUGF("PCI Autoconfig: BAR %d, I/O, size=0x%llx, ", bar_nr, (u64)bar_size);
 		} else {
 			if ( (bar_response & PCI_BASE_ADDRESS_MEM_TYPE_MASK) ==
-			     PCI_BASE_ADDRESS_MEM_TYPE_64)
-				found_mem64 = 1;
+			     PCI_BASE_ADDRESS_MEM_TYPE_64) {
+				u32 bar_response_upper;
+				u64 bar64;
+				pci_hose_write_config_dword(hose, dev, bar+4, 0xffffffff);
+				pci_hose_read_config_dword(hose, dev, bar+4, &bar_response_upper);
+
+				bar64 = ((u64)bar_response_upper << 32) | bar_response;
 
-			bar_size = ~(bar_response & PCI_BASE_ADDRESS_MEM_MASK) + 1;
+				bar_size = ~(bar64 & PCI_BASE_ADDRESS_MEM_MASK) + 1;
+				found_mem64 = 1;
+			} else {
+				bar_size = (u32)(~(bar_response & PCI_BASE_ADDRESS_MEM_MASK) + 1);
+			}
 			if (prefetch && (bar_response & PCI_BASE_ADDRESS_MEM_PREFETCH))
 				bar_res = prefetch;
 			else
 				bar_res = mem;
 
-			DEBUGF("PCI Autoconfig: BAR %d, Mem, size=0x%x, ", bar_nr, bar_size);
+			DEBUGF("PCI Autoconfig: BAR %d, Mem, size=0x%llx, ", bar_nr, (u64)bar_size);
 		}
 
 		if (pciauto_region_allocate(bar_res, bar_size, &bar_value) == 0) {
 			/* Write it out and update our limit */
-			pci_hose_write_config_dword(hose, dev, bar, bar_value);
+			pci_hose_write_config_dword(hose, dev, bar, (u32)bar_value);
 
-			/*
-			 * If we are a 64-bit decoder then increment to the
-			 * upper 32 bits of the bar and force it to locate
-			 * in the lower 4GB of memory.
-			 */
 			if (found_mem64) {
 				bar += 4;
+#ifdef CONFIG_SYS_PCI_64BIT
+				pci_hose_write_config_dword(hose, dev, bar, (u32)(bar_value>>32));
+#else
+				/*
+				 * If we are a 64-bit decoder then increment to the
+				 * upper 32 bits of the bar and force it to locate
+				 * in the lower 4GB of memory.
+				 */
 				pci_hose_write_config_dword(hose, dev, bar, 0x00000000);
+#endif
 			}
 
 			cmdstat |= (bar_response & PCI_BASE_ADDRESS_SPACE) ?
@@ -154,7 +169,7 @@ void pciauto_setup_device(struct pci_controller *hose,
 
 	pci_hose_write_config_dword(hose, dev, PCI_COMMAND, cmdstat);
 	pci_hose_write_config_byte(hose, dev, PCI_CACHE_LINE_SIZE,
-		CFG_PCI_CACHE_LINE_SIZE);
+		CONFIG_SYS_PCI_CACHE_LINE_SIZE);
 	pci_hose_write_config_byte(hose, dev, PCI_LATENCY_TIMER, 0x80);
 }
 
@@ -289,35 +304,36 @@ void pciauto_config_init(struct pci_controller *hose)
 	if (hose->pci_mem) {
 		pciauto_region_init(hose->pci_mem);
 
-		DEBUGF("PCI Autoconfig: Bus Memory region: [%lx-%lx],\n"
-		       "\t\tPhysical Memory [%x-%x]\n",
-		    hose->pci_mem->bus_start,
-		    hose->pci_mem->bus_start + hose->pci_mem->size - 1,
-		    hose->pci_mem->phys_start,
-		    hose->pci_mem->phys_start + hose->pci_mem->size - 1);
+		DEBUGF("PCI Autoconfig: Bus Memory region: [0x%llx-0x%llx],\n"
+		       "\t\tPhysical Memory [%llx-%llxx]\n",
+		    (u64)hose->pci_mem->bus_start,
+		    (u64)(hose->pci_mem->bus_start + hose->pci_mem->size - 1),
+		    (u64)hose->pci_mem->phys_start,
+		    (u64)(hose->pci_mem->phys_start + hose->pci_mem->size - 1));
 	}
 
 	if (hose->pci_prefetch) {
 		pciauto_region_init(hose->pci_prefetch);
 
-		DEBUGF("PCI Autoconfig: Bus Prefetchable Mem: [%lx-%lx],\n"
-		       "\t\tPhysical Memory [%x-%x]\n",
-		    hose->pci_prefetch->bus_start,
-		    hose->pci_prefetch->bus_start + hose->pci_prefetch->size - 1,
-		    hose->pci_prefetch->phys_start,
-		    hose->pci_prefetch->phys_start +
-				hose->pci_prefetch->size - 1);
+		DEBUGF("PCI Autoconfig: Bus Prefetchable Mem: [0x%llx-0x%llx],\n"
+		       "\t\tPhysical Memory [%llx-%llx]\n",
+		    (u64)hose->pci_prefetch->bus_start,
+		    (u64)(hose->pci_prefetch->bus_start +
+			    hose->pci_prefetch->size - 1),
+		    (u64)hose->pci_prefetch->phys_start,
+		    (u64)(hose->pci_prefetch->phys_start +
+			    hose->pci_prefetch->size - 1));
 	}
 
 	if (hose->pci_io) {
 		pciauto_region_init(hose->pci_io);
 
-		DEBUGF("PCI Autoconfig: Bus I/O region: [%lx-%lx],\n"
-		       "\t\tPhysical Memory: [%x-%x]\n",
-		    hose->pci_io->bus_start,
-		    hose->pci_io->bus_start + hose->pci_io->size - 1,
-		    hose->pci_io->phys_start,
-		    hose->pci_io->phys_start + hose->pci_io->size - 1);
+		DEBUGF("PCI Autoconfig: Bus I/O region: [0x%llx-0x%llx],\n"
+		       "\t\tPhysical Memory: [%llx-%llx]\n",
+		    (u64)hose->pci_io->bus_start,
+		    (u64)(hose->pci_io->bus_start + hose->pci_io->size - 1),
+		    (u64)hose->pci_io->phys_start,
+		    (u64)(hose->pci_io->phys_start + hose->pci_io->size - 1));
 
 	}
 }
diff --git a/drivers/pci/pci_sh7751.c b/drivers/pci/pci_sh7751.c
index a058e1d37..df6d76f7f 100644
--- a/drivers/pci/pci_sh7751.c
+++ b/drivers/pci/pci_sh7751.c
@@ -23,18 +23,19 @@
  */
 
 #include <common.h>
+#include <pci.h>
 #include <asm/processor.h>
 #include <asm/io.h>
-#include <pci.h>
+#include <asm/pci.h>
 
 /* Register addresses and such */
 #define SH7751_BCR1	(vu_long *)0xFF800000
-#define SH7751_BCR2	(vu_short*)0xFF800004
+#define SH7751_BCR2	(vu_short *)0xFF800004
 #define SH7751_WCR1	(vu_long *)0xFF800008
 #define SH7751_WCR2	(vu_long *)0xFF80000C
 #define SH7751_WCR3	(vu_long *)0xFF800010
 #define SH7751_MCR	(vu_long *)0xFF800014
-#define SH7751_BCR3	(vu_short*)0xFF800050
+#define SH7751_BCR3	(vu_short *)0xFF800050
 #define SH7751_PCICONF0 (vu_long *)0xFE200000
 #define SH7751_PCICONF1 (vu_long *)0xFE200004
 #define SH7751_PCICONF2 (vu_long *)0xFE200008
@@ -87,12 +88,12 @@
 #define SH7751_PCIPAR   (vu_long *)0xFE2001C0
 #define SH7751_PCIPDR   (vu_long *)0xFE200220
 
-#define p4_in(addr)     *(addr)
-#define p4_out(data,addr) *(addr) = (data)
+#define p4_in(addr)	(*addr)
+#define p4_out(data, addr) (*addr) = (data)
 
 /* Double word */
 int pci_sh4_read_config_dword(struct pci_controller *hose,
-			      pci_dev_t dev, int offset, u32 * value)
+			      pci_dev_t dev, int offset, u32 *value)
 {
 	u32 par_data = 0x80000000 | dev;
 
@@ -103,7 +104,7 @@ int pci_sh4_read_config_dword(struct pci_controller *hose,
 }
 
 int pci_sh4_write_config_dword(struct pci_controller *hose,
-			       pci_dev_t dev, int offset, u32 * value)
+			       pci_dev_t dev, int offset, u32 value)
 {
 	u32 par_data = 0x80000000 | dev;
 
@@ -126,15 +127,18 @@ int pci_sh7751_init(struct pci_controller *hose)
 	/* Double-check some BSC config settings */
 	/* (Area 3 non-MPX 32-bit, PCI bus pins) */
 	if ((p4_in(SH7751_BCR1) & 0x20008) == 0x20000) {
-		printf("SH7751_BCR1 0x%08X\n", p4_in(SH7751_BCR1));
+		printf("SH7751_BCR1 value is wrong(0x%08X)\n",
+			(unsigned int)p4_in(SH7751_BCR1));
 		return 2;
 	}
 	if ((p4_in(SH7751_BCR2) & 0xC0) != 0xC0) {
-		printf("SH7751_BCR2 0x%08X\n", p4_in(SH7751_BCR2));
+		printf("SH7751_BCR2 value is wrong(0x%08X)\n",
+			(unsigned int)p4_in(SH7751_BCR2));
 		return 3;
 	}
 	if (p4_in(SH7751_BCR2) & 0x01) {
-		printf("SH7751_BCR2 0x%08X\n", p4_in(SH7751_BCR2));
+		printf("SH7751_BCR2 value is wrong(0x%08X)\n",
+			(unsigned int)p4_in(SH7751_BCR2));
 		return 4;
 	}
 
@@ -183,8 +187,8 @@ int pci_sh7751_init(struct pci_controller *hose)
 
 	/* Copy BSC registers into PCI BSC */
 	p4_out(inl(SH7751_BCR1), SH7751_PCIBCR1);
-	p4_out(inl(SH7751_BCR2), SH7751_PCIBCR2);
-	p4_out(inl(SH7751_BCR3), SH7751_PCIBCR3);
+	p4_out(inw(SH7751_BCR2), SH7751_PCIBCR2);
+	p4_out(inw(SH7751_BCR3), SH7751_PCIBCR3);
 	p4_out(inl(SH7751_WCR1), SH7751_PCIWCR1);
 	p4_out(inl(SH7751_WCR2), SH7751_PCIWCR2);
 	p4_out(inl(SH7751_WCR3), SH7751_PCIWCR3);
diff --git a/drivers/pci/pci_sh7780.c b/drivers/pci/pci_sh7780.c
index 2d04b4fc6..7555d9606 100644
--- a/drivers/pci/pci_sh7780.c
+++ b/drivers/pci/pci_sh7780.c
@@ -25,9 +25,10 @@
 
 #include <common.h>
 
+#include <pci.h>
 #include <asm/processor.h>
+#include <asm/pci.h>
 #include <asm/io.h>
-#include <pci.h>
 
 #define SH7780_VENDOR_ID	0x1912
 #define SH7780_DEVICE_ID	0x0002
@@ -41,10 +42,10 @@
 #define SH7780_PCICR_PRST	0x00000002
 #define SH7780_PCICR_CFIN	0x00000001
 
-#define p4_in(addr)			*((vu_long *)addr)
-#define p4_out(data,addr)	*(vu_long *)(addr) = (data)
-#define p4_inw(addr)		*((vu_short *)addr)
-#define p4_outw(data,addr)	*(vu_short *)(addr) = (data)
+#define p4_in(addr)			(*(vu_long *)addr)
+#define p4_out(data, addr)	(*(vu_long *)addr) = (data)
+#define p4_inw(addr)		(*(vu_short *)addr)
+#define p4_outw(data, addr)	(*(vu_short *)addr) = (data)
 
 int pci_sh4_read_config_dword(struct pci_controller *hose,
 				    pci_dev_t dev, int offset, u32 *value)
@@ -72,9 +73,9 @@ int pci_sh7780_init(struct pci_controller *hose)
 	p4_out(0x01, SH7780_PCIECR);
 
 	if (p4_inw(SH7780_PCIVID) != SH7780_VENDOR_ID
-	    && p4_inw(SH7780_PCIDID) != SH7780_DEVICE_ID){
+	    && p4_inw(SH7780_PCIDID) != SH7780_DEVICE_ID) {
 		printf("PCI: Unknown PCI host bridge.\n");
-		return;
+		return -1;
 	}
 	printf("PCI: SH7780 PCI host bridge found.\n");
 
diff --git a/drivers/pci/tsi108_pci.c b/drivers/pci/tsi108_pci.c
index edd614f23..d153fc6be 100644
--- a/drivers/pci/tsi108_pci.c
+++ b/drivers/pci/tsi108_pci.c
@@ -47,32 +47,32 @@ void tsi108_clear_pci_error (void)
 	 * requests.
 	 */
 	/* Read PB Error Log Registers */
-	err_stat = *(volatile u32 *)(CFG_TSI108_CSR_BASE +
+	err_stat = *(volatile u32 *)(CONFIG_SYS_TSI108_CSR_BASE +
 				     TSI108_PB_REG_OFFSET + PB_ERRCS);
-	err_addr = *(volatile u32 *)(CFG_TSI108_CSR_BASE +
+	err_addr = *(volatile u32 *)(CONFIG_SYS_TSI108_CSR_BASE +
 				     TSI108_PB_REG_OFFSET + PB_AERR);
 	if (err_stat & PB_ERRCS_ES) {
 		/* Clear PCI/X bus errors if applicable */
-		if ((err_addr & 0xFF000000) == CFG_PCI_CFG_BASE) {
+		if ((err_addr & 0xFF000000) == CONFIG_SYS_PCI_CFG_BASE) {
 			/* Clear error flag */
-			*(u32 *) (CFG_TSI108_CSR_BASE +
+			*(u32 *) (CONFIG_SYS_TSI108_CSR_BASE +
 				  TSI108_PB_REG_OFFSET + PB_ERRCS) =
 			    PB_ERRCS_ES;
 
 			/* Clear read error reported in PB_ISR */
-			*(u32 *) (CFG_TSI108_CSR_BASE +
+			*(u32 *) (CONFIG_SYS_TSI108_CSR_BASE +
 				  TSI108_PB_REG_OFFSET + PB_ISR) =
 			    PB_ISR_PBS_RD_ERR;
 
 		/* Clear errors reported by PCI CSR (Normally Master Abort) */
-			pci_stat = *(volatile u32 *)(CFG_TSI108_CSR_BASE +
+			pci_stat = *(volatile u32 *)(CONFIG_SYS_TSI108_CSR_BASE +
 						     TSI108_PCI_REG_OFFSET +
 						     PCI_CSR);
-			*(volatile u32 *)(CFG_TSI108_CSR_BASE +
+			*(volatile u32 *)(CONFIG_SYS_TSI108_CSR_BASE +
 					  TSI108_PCI_REG_OFFSET + PCI_CSR) =
 			    pci_stat;
 
-			*(volatile u32 *)(CFG_TSI108_CSR_BASE +
+			*(volatile u32 *)(CONFIG_SYS_TSI108_CSR_BASE +
 					  TSI108_PCI_REG_OFFSET +
 					  PCI_IRP_STAT) = PCI_IRP_STAT_P_CSR;
 		}
@@ -102,8 +102,8 @@ unsigned int __get_pci_config_dword (u32 addr)
 static int tsi108_read_config_dword (struct pci_controller *hose,
 				    pci_dev_t dev, int offset, u32 * value)
 {
-	dev &= (CFG_PCI_CFG_SIZE - 1);
-	dev |= (CFG_PCI_CFG_BASE | (offset & 0xfc));
+	dev &= (CONFIG_SYS_PCI_CFG_SIZE - 1);
+	dev |= (CONFIG_SYS_PCI_CFG_BASE | (offset & 0xfc));
 	*value = __get_pci_config_dword(dev);
 	if (0xFFFFFFFF == *value)
 		tsi108_clear_pci_error ();
@@ -113,8 +113,8 @@ static int tsi108_read_config_dword (struct pci_controller *hose,
 static int tsi108_write_config_dword (struct pci_controller *hose,
 				     pci_dev_t dev, int offset, u32 value)
 {
-	dev &= (CFG_PCI_CFG_SIZE - 1);
-	dev |= (CFG_PCI_CFG_BASE | (offset & 0xfc));
+	dev &= (CONFIG_SYS_PCI_CFG_SIZE - 1);
+	dev |= (CONFIG_SYS_PCI_CFG_BASE | (offset & 0xfc));
 
 	out_le32 ((volatile unsigned *)dev, value);
 
@@ -129,19 +129,19 @@ void pci_init_board (void)
 	hose->last_busno = 0xff;
 
 	pci_set_region (hose->regions + 0,
-		       CFG_PCI_MEMORY_BUS,
-		       CFG_PCI_MEMORY_PHYS,
-		       CFG_PCI_MEMORY_SIZE, PCI_REGION_MEM | PCI_REGION_MEMORY);
+		       CONFIG_SYS_PCI_MEMORY_BUS,
+		       CONFIG_SYS_PCI_MEMORY_PHYS,
+		       CONFIG_SYS_PCI_MEMORY_SIZE, PCI_REGION_MEM | PCI_REGION_MEMORY);
 
 	/* PCI memory space */
 	pci_set_region (hose->regions + 1,
-		       CFG_PCI_MEM_BUS,
-		       CFG_PCI_MEM_PHYS, CFG_PCI_MEM_SIZE, PCI_REGION_MEM);
+		       CONFIG_SYS_PCI_MEM_BUS,
+		       CONFIG_SYS_PCI_MEM_PHYS, CONFIG_SYS_PCI_MEM_SIZE, PCI_REGION_MEM);
 
 	/* PCI I/O space */
 	pci_set_region (hose->regions + 2,
-		       CFG_PCI_IO_BUS,
-		       CFG_PCI_IO_PHYS, CFG_PCI_IO_SIZE, PCI_REGION_IO);
+		       CONFIG_SYS_PCI_IO_BUS,
+		       CONFIG_SYS_PCI_IO_PHYS, CONFIG_SYS_PCI_IO_SIZE, PCI_REGION_IO);
 
 	hose->region_count = 3;
 
diff --git a/drivers/pci/w83c553f.c b/drivers/pci/w83c553f.c
index d7355a408..85614223f 100644
--- a/drivers/pci/w83c553f.c
+++ b/drivers/pci/w83c553f.c
@@ -42,7 +42,7 @@
 			out_be16((u16*) (addr),(val)); udelay(1); \
 			} while (0)
 
-extern uint ide_bus_offset[CFG_IDE_MAXBUS];
+extern uint ide_bus_offset[CONFIG_SYS_IDE_MAXBUS];
 
 void initialise_pic(void);
 void initialise_dma(void);
@@ -105,7 +105,7 @@ void initialise_w83c553f(void)
 
 	pci_read_config_dword(devbusfn, PCI_BASE_ADDRESS_0, &ide_bus_offset[0]);
 	ide_bus_offset[0] &= ~1;
-#if CFG_IDE_MAXBUS > 1
+#if CONFIG_SYS_IDE_MAXBUS > 1
 	pci_read_config_dword(devbusfn, PCI_BASE_ADDRESS_2, &ide_bus_offset[1]);
 	ide_bus_offset[1] &= ~1;
 #endif
diff --git a/drivers/pcmcia/i82365.c b/drivers/pcmcia/i82365.c
index 1e2431e49..1bcb3a52e 100644
--- a/drivers/pcmcia/i82365.c
+++ b/drivers/pcmcia/i82365.c
@@ -909,8 +909,8 @@ int i82365_init (void)
 	mem.map = 0;
 	mem.flags = MAP_ATTRIB | MAP_ACTIVE;
 	mem.speed = 300;
-	mem.sys_start = CFG_PCMCIA_MEM_ADDR;
-	mem.sys_stop = CFG_PCMCIA_MEM_ADDR + CFG_PCMCIA_MEM_SIZE - 1;
+	mem.sys_start = CONFIG_SYS_PCMCIA_MEM_ADDR;
+	mem.sys_stop = CONFIG_SYS_PCMCIA_MEM_ADDR + CONFIG_SYS_PCMCIA_MEM_SIZE - 1;
 	mem.card_start = 0;
 	i365_set_mem_map (&socket, &mem);
 
@@ -918,8 +918,8 @@ int i82365_init (void)
 	mem.map = 1;
 	mem.flags = MAP_ACTIVE;
 	mem.speed = 300;
-	mem.sys_start = CFG_PCMCIA_MEM_ADDR + CFG_PCMCIA_MEM_SIZE;
-	mem.sys_stop = CFG_PCMCIA_MEM_ADDR + (2 * CFG_PCMCIA_MEM_SIZE) - 1;
+	mem.sys_start = CONFIG_SYS_PCMCIA_MEM_ADDR + CONFIG_SYS_PCMCIA_MEM_SIZE;
+	mem.sys_stop = CONFIG_SYS_PCMCIA_MEM_ADDR + (2 * CONFIG_SYS_PCMCIA_MEM_SIZE) - 1;
 	mem.card_start = 0;
 	i365_set_mem_map (&socket, &mem);
 
@@ -988,8 +988,8 @@ static void i82365_dump_regions (pci_dev_t dev)
 {
 	u_int tmp[2];
 	u_int *mem = (void *) socket.cb_phys;
-	u_char *cis = (void *) CFG_PCMCIA_MEM_ADDR;
-	u_char *ide = (void *) (CFG_ATA_BASE_ADDR + CFG_ATA_REG_OFFSET);
+	u_char *cis = (void *) CONFIG_SYS_PCMCIA_MEM_ADDR;
+	u_char *ide = (void *) (CONFIG_SYS_ATA_BASE_ADDR + CONFIG_SYS_ATA_REG_OFFSET);
 
 	pci_read_config_dword (dev, 0x00, tmp + 0);
 	pci_read_config_dword (dev, 0x80, tmp + 1);
diff --git a/drivers/pcmcia/marubun_pcmcia.c b/drivers/pcmcia/marubun_pcmcia.c
index d075ba37c..f715dec5f 100644
--- a/drivers/pcmcia/marubun_pcmcia.c
+++ b/drivers/pcmcia/marubun_pcmcia.c
@@ -38,20 +38,20 @@
 #if defined(CONFIG_PCMCIA)
 
 /* MR-SHPC-01 register */
-#define MRSHPC_MODE	(CFG_MARUBUN_MRSHPC + 4)
-#define MRSHPC_OPTION   (CFG_MARUBUN_MRSHPC + 6)
-#define MRSHPC_CSR      (CFG_MARUBUN_MRSHPC + 8)
-#define MRSHPC_ISR      (CFG_MARUBUN_MRSHPC + 10)
-#define MRSHPC_ICR      (CFG_MARUBUN_MRSHPC + 12)
-#define MRSHPC_CPWCR    (CFG_MARUBUN_MRSHPC + 14)
-#define MRSHPC_MW0CR1   (CFG_MARUBUN_MRSHPC + 16)
-#define MRSHPC_MW1CR1   (CFG_MARUBUN_MRSHPC + 18)
-#define MRSHPC_IOWCR1   (CFG_MARUBUN_MRSHPC + 20)
-#define MRSHPC_MW0CR2   (CFG_MARUBUN_MRSHPC + 22)
-#define MRSHPC_MW1CR2   (CFG_MARUBUN_MRSHPC + 24)
-#define MRSHPC_IOWCR2   (CFG_MARUBUN_MRSHPC + 26)
-#define MRSHPC_CDCR     (CFG_MARUBUN_MRSHPC + 28)
-#define MRSHPC_PCIC_INFO (CFG_MARUBUN_MRSHPC + 30)
+#define MRSHPC_MODE	(CONFIG_SYS_MARUBUN_MRSHPC + 4)
+#define MRSHPC_OPTION   (CONFIG_SYS_MARUBUN_MRSHPC + 6)
+#define MRSHPC_CSR      (CONFIG_SYS_MARUBUN_MRSHPC + 8)
+#define MRSHPC_ISR      (CONFIG_SYS_MARUBUN_MRSHPC + 10)
+#define MRSHPC_ICR      (CONFIG_SYS_MARUBUN_MRSHPC + 12)
+#define MRSHPC_CPWCR    (CONFIG_SYS_MARUBUN_MRSHPC + 14)
+#define MRSHPC_MW0CR1   (CONFIG_SYS_MARUBUN_MRSHPC + 16)
+#define MRSHPC_MW1CR1   (CONFIG_SYS_MARUBUN_MRSHPC + 18)
+#define MRSHPC_IOWCR1   (CONFIG_SYS_MARUBUN_MRSHPC + 20)
+#define MRSHPC_MW0CR2   (CONFIG_SYS_MARUBUN_MRSHPC + 22)
+#define MRSHPC_MW1CR2   (CONFIG_SYS_MARUBUN_MRSHPC + 24)
+#define MRSHPC_IOWCR2   (CONFIG_SYS_MARUBUN_MRSHPC + 26)
+#define MRSHPC_CDCR     (CONFIG_SYS_MARUBUN_MRSHPC + 28)
+#define MRSHPC_PCIC_INFO (CONFIG_SYS_MARUBUN_MRSHPC + 30)
 
 int pcmcia_on (void)
 {
@@ -98,8 +98,8 @@ int pcmcia_on (void)
 
 	outw(0x0000,MRSHPC_ISR);
 	outw(0x2000,MRSHPC_ICR);
-	outb(0x00,(CFG_MARUBUN_MW2 + 0x206));
-	outb(0x42,(CFG_MARUBUN_MW2 + 0x200));
+	outb(0x00,(CONFIG_SYS_MARUBUN_MW2 + 0x206));
+	outb(0x42,(CONFIG_SYS_MARUBUN_MW2 + 0x200));
 
 	return 0;
 }
diff --git a/drivers/pcmcia/mpc8xx_pcmcia.c b/drivers/pcmcia/mpc8xx_pcmcia.c
index 14477a448..95ea5e999 100644
--- a/drivers/pcmcia/mpc8xx_pcmcia.c
+++ b/drivers/pcmcia/mpc8xx_pcmcia.c
@@ -34,8 +34,8 @@ static u_int m8xx_get_speed(u_int ns, u_int is_io);
 
 /* look up table for pgcrx registers */
 u_int *pcmcia_pgcrx[2] = {
-	&((immap_t *)CFG_IMMR)->im_pcmcia.pcmc_pgcra,
-	&((immap_t *)CFG_IMMR)->im_pcmcia.pcmc_pgcrb,
+	&((immap_t *)CONFIG_SYS_IMMR)->im_pcmcia.pcmc_pgcra,
+	&((immap_t *)CONFIG_SYS_IMMR)->im_pcmcia.pcmc_pgcrb,
 };
 
 /*
@@ -66,11 +66,11 @@ static const u_int m8xx_size_to_gray[M8XX_SIZES_NO] =
 #endif
 
 #if	defined(CONFIG_LWMON) || defined(CONFIG_NSCU)
-#define	CFG_PCMCIA_TIMING	(	PCMCIA_SHT(9)	\
+#define	CONFIG_SYS_PCMCIA_TIMING	(	PCMCIA_SHT(9)	\
 				|	PCMCIA_SST(3)	\
 				|	PCMCIA_SL(12))
 #else
-#define	CFG_PCMCIA_TIMING	(	PCMCIA_SHT(2)	\
+#define	CONFIG_SYS_PCMCIA_TIMING	(	PCMCIA_SHT(2)	\
 				|	PCMCIA_SST(4)	\
 				|	PCMCIA_SL(9))
 #endif
@@ -88,12 +88,12 @@ int pcmcia_on (void)
 	debug ("Enable PCMCIA " PCMCIA_SLOT_MSG "\n");
 
 	/* intialize the fixed memory windows */
-	win = (pcmcia_win_t *)(&((immap_t *)CFG_IMMR)->im_pcmcia.pcmc_pbr0);
-	base = CFG_PCMCIA_MEM_ADDR;
+	win = (pcmcia_win_t *)(&((immap_t *)CONFIG_SYS_IMMR)->im_pcmcia.pcmc_pbr0);
+	base = CONFIG_SYS_PCMCIA_MEM_ADDR;
 
-	if((reg = m8xx_get_graycode(CFG_PCMCIA_MEM_SIZE)) == -1) {
+	if((reg = m8xx_get_graycode(CONFIG_SYS_PCMCIA_MEM_SIZE)) == -1) {
 		printf ("Cannot set window size to 0x%08x\n",
-			CFG_PCMCIA_MEM_SIZE);
+			CONFIG_SYS_PCMCIA_MEM_SIZE);
 		return (1);
 	}
 
@@ -125,7 +125,7 @@ int pcmcia_on (void)
 				|	PCMCIA_PRS_ATTR
 				|	slotbit
 				|	PCMCIA_PV
-				|	CFG_PCMCIA_TIMING );
+				|	CONFIG_SYS_PCMCIA_TIMING );
 			break;
 		}
 		case 5:
@@ -135,7 +135,7 @@ int pcmcia_on (void)
 				|	PCMCIA_PRS_IO
 				|	slotbit
 				|	PCMCIA_PV
-				|	CFG_PCMCIA_TIMING );
+				|	CONFIG_SYS_PCMCIA_TIMING );
 			break;
 		}
 		case 6:
@@ -145,7 +145,7 @@ int pcmcia_on (void)
 				|	PCMCIA_PRS_IO
 				|	slotbit
 				|	PCMCIA_PV
-				|	CFG_PCMCIA_TIMING );
+				|	CONFIG_SYS_PCMCIA_TIMING );
 			break;
 		}
 #endif	/* CONFIG_IDE_8xx_PCCARD */
@@ -157,7 +157,7 @@ int pcmcia_on (void)
 				|	PCMCIA_PRS_IO
 				|	slotbit
 				|	PCMCIA_PV
-				|	CFG_PCMCIA_TIMING );
+				|	CONFIG_SYS_PCMCIA_TIMING );
 			break;
 		}
 #endif	/* CONFIG_HMI10 */
@@ -168,7 +168,7 @@ int pcmcia_on (void)
 
 		debug ("MemWin %d: PBR 0x%08lX  POR %08lX\n",
 		       i, win->br, win->or);
-		base += CFG_PCMCIA_MEM_SIZE;
+		base += CONFIG_SYS_PCMCIA_MEM_SIZE;
 		++win;
 	}
 
@@ -198,14 +198,14 @@ int pcmcia_off (void)
 	printf ("Disable PCMCIA " PCMCIA_SLOT_MSG "\n");
 
 	/* clear interrupt state, and disable interrupts */
-	((immap_t *)CFG_IMMR)->im_pcmcia.pcmc_pscr =  PCMCIA_MASK(_slot_);
-	((immap_t *)CFG_IMMR)->im_pcmcia.pcmc_per &= ~PCMCIA_MASK(_slot_);
+	((immap_t *)CONFIG_SYS_IMMR)->im_pcmcia.pcmc_pscr =  PCMCIA_MASK(_slot_);
+	((immap_t *)CONFIG_SYS_IMMR)->im_pcmcia.pcmc_per &= ~PCMCIA_MASK(_slot_);
 
 	/* turn off interrupt and disable CxOE */
 	PCMCIA_PGCRX(_slot_) = __MY_PCMCIA_GCRX_CXOE;
 
 	/* turn off memory windows */
-	win = (pcmcia_win_t *)(&((immap_t *)CFG_IMMR)->im_pcmcia.pcmc_pbr0);
+	win = (pcmcia_win_t *)(&((immap_t *)CONFIG_SYS_IMMR)->im_pcmcia.pcmc_pbr0);
 
 	for (i=0; i<PCMCIA_MEM_WIN_NO; ++i) {
 		/* disable memory window */
diff --git a/drivers/pcmcia/pxa_pcmcia.c b/drivers/pcmcia/pxa_pcmcia.c
index 11d8590d7..d06ab746c 100644
--- a/drivers/pcmcia/pxa_pcmcia.c
+++ b/drivers/pcmcia/pxa_pcmcia.c
@@ -13,12 +13,12 @@ static inline void msWait(unsigned msVal)
 int pcmcia_on (void)
 {
 	unsigned int reg_arr[] = {
-		0x48000028, CFG_MCMEM0_VAL,
-		0x4800002c, CFG_MCMEM1_VAL,
-		0x48000030, CFG_MCATT0_VAL,
-		0x48000034, CFG_MCATT1_VAL,
-		0x48000038, CFG_MCIO0_VAL,
-		0x4800003c, CFG_MCIO1_VAL,
+		0x48000028, CONFIG_SYS_MCMEM0_VAL,
+		0x4800002c, CONFIG_SYS_MCMEM1_VAL,
+		0x48000030, CONFIG_SYS_MCATT0_VAL,
+		0x48000034, CONFIG_SYS_MCATT1_VAL,
+		0x48000038, CONFIG_SYS_MCIO0_VAL,
+		0x4800003c, CONFIG_SYS_MCIO1_VAL,
 
 		0, 0
 	};
diff --git a/drivers/pcmcia/ti_pci1410a.c b/drivers/pcmcia/ti_pci1410a.c
index c876d0c40..6ab97597f 100644
--- a/drivers/pcmcia/ti_pci1410a.c
+++ b/drivers/pcmcia/ti_pci1410a.c
@@ -88,8 +88,8 @@ const char *indent = "\t   ";
 
 int do_pinit(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 {
-#ifndef CFG_FIRST_PCMCIA_BUS
-# define CFG_FIRST_PCMCIA_BUS 0
+#ifndef CONFIG_SYS_FIRST_PCMCIA_BUS
+# define CONFIG_SYS_FIRST_PCMCIA_BUS 0
 #endif
 
 	int rcode = 0;
@@ -99,7 +99,7 @@ int do_pinit(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 		return 1;
 	}
 	if (strcmp(argv[1],"on") == 0) {
-		rcode = pcmcia_on(CFG_FIRST_PCMCIA_BUS);
+		rcode = pcmcia_on(CONFIG_SYS_FIRST_PCMCIA_BUS);
 	} else if (strcmp(argv[1],"off") == 0) {
 		rcode = pcmcia_off();
 	} else {
@@ -148,11 +148,11 @@ int pcmcia_on(int ide_base_bus)
 		debug("Enable PCMCIA Ti PCI1410A\n");
 	}
 
-	pcmcia_cis_ptr = CFG_PCMCIA_CIS_WIN;
-	cis_len = CFG_PCMCIA_CIS_WIN_SIZE;
+	pcmcia_cis_ptr = CONFIG_SYS_PCMCIA_CIS_WIN;
+	cis_len = CONFIG_SYS_PCMCIA_CIS_WIN_SIZE;
 
-	io_base = CFG_PCMCIA_IO_WIN;
-	io_len = CFG_PCMCIA_IO_WIN_SIZE;
+	io_base = CONFIG_SYS_PCMCIA_IO_WIN;
+	io_len = CONFIG_SYS_PCMCIA_IO_WIN_SIZE;
 
 	/*
 	 * Setup the PCI device.
diff --git a/drivers/pcmcia/tqm8xx_pcmcia.c b/drivers/pcmcia/tqm8xx_pcmcia.c
index cc980c2ea..6ba8b5c01 100644
--- a/drivers/pcmcia/tqm8xx_pcmcia.c
+++ b/drivers/pcmcia/tqm8xx_pcmcia.c
@@ -40,7 +40,7 @@
 
 static inline void power_config(int slot)
 {
-	volatile immap_t *immap = (immap_t *)CFG_IMMR;
+	volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR;
 	/*
 	 * Configure Port B  pins for
 	 * 5 Volts Enable and 3 Volts enable
@@ -50,21 +50,21 @@ static inline void power_config(int slot)
 
 static inline void power_off(int slot)
 {
-	volatile immap_t *immap = (immap_t *)CFG_IMMR;
+	volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR;
 	/* remove all power */
 	immap->im_cpm.cp_pbdat |= 0x00000300;
 }
 
 static inline void power_on_5_0(int slot)
 {
-	volatile immap_t *immap = (immap_t *)CFG_IMMR;
+	volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR;
 	immap->im_cpm.cp_pbdat &= ~(0x0000100);
 	immap->im_cpm.cp_pbdir |= 0x00000300;
 }
 
 static inline void power_on_3_3(int slot)
 {
-	volatile immap_t *immap = (immap_t *)CFG_IMMR;
+	volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR;
 	immap->im_cpm.cp_pbdat &= ~(0x0000200);
 	immap->im_cpm.cp_pbdir |= 0x00000300;
 }
@@ -97,7 +97,7 @@ static inline void power_on_3_3(int slot)
 
 static inline void power_config(int slot)
 {
-	volatile immap_t *immap = (immap_t *)CFG_IMMR;
+	volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR;
 	/*
 	* Configure Port C pins for
 	* 5 Volts Enable and 3 Volts enable
@@ -108,20 +108,20 @@ static inline void power_config(int slot)
 
 static inline void power_off(int slot)
 {
-	volatile immap_t *immap = (immap_t *)CFG_IMMR;
+	volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR;
 	immap->im_ioport.iop_pcdat &= ~(0x0002 | 0x0004);
 }
 
 static inline void power_on_5_0(int slot)
 {
-	volatile immap_t *immap = (immap_t *)CFG_IMMR;
+	volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR;
 	immap->im_ioport.iop_pcdat |= 0x0004;
 	immap->im_ioport.iop_pcdir |= (0x0002 | 0x0004);
 }
 
 static inline void power_on_3_3(int slot)
 {
-	volatile immap_t *immap = (immap_t *)CFG_IMMR;
+	volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR;
 	immap->im_ioport.iop_pcdat |= 0x0002;
 	immap->im_ioport.iop_pcdir |= (0x0002 | 0x0004);
 }
@@ -132,14 +132,14 @@ static inline void power_on_3_3(int slot)
 static inline int check_card_is_absent(int slot)
 {
 	volatile pcmconf8xx_t *pcmp =
-		(pcmconf8xx_t *)(&(((immap_t *)CFG_IMMR)->im_pcmcia));
+		(pcmconf8xx_t *)(&(((immap_t *)CONFIG_SYS_IMMR)->im_pcmcia));
 	return pcmp->pcmc_pipr & (0x10000000 >> (slot << 4));
 }
 #else
 static inline int check_card_is_absent(int slot)
 {
 	volatile pcmconf8xx_t *pcmp =
-		(pcmconf8xx_t *)(&(((immap_t *)CFG_IMMR)->im_pcmcia));
+		(pcmconf8xx_t *)(&(((immap_t *)CONFIG_SYS_IMMR)->im_pcmcia));
 	return pcmp->pcmc_pipr & (0x18000000 >> (slot << 4));
 }
 #endif
@@ -153,9 +153,9 @@ static inline int check_card_is_absent(int slot)
 int pcmcia_hardware_enable(int slot)
 {
 	volatile pcmconf8xx_t *pcmp =
-		(pcmconf8xx_t *)(&(((immap_t *)CFG_IMMR)->im_pcmcia));
+		(pcmconf8xx_t *)(&(((immap_t *)CONFIG_SYS_IMMR)->im_pcmcia));
 	volatile sysconf8xx_t *sysp =
-		(sysconf8xx_t *)(&(((immap_t *)CFG_IMMR)->im_siu_conf));
+		(sysconf8xx_t *)(&(((immap_t *)CONFIG_SYS_IMMR)->im_siu_conf));
 	uint reg, mask;
 
 	debug ("hardware_enable: " PCMCIA_BOARD_MSG " Slot %c\n", 'A'+slot);
@@ -271,7 +271,7 @@ int pcmcia_voltage_set(int slot, int vcc, int vpp)
 	u_long reg;
 # ifdef DEBUG
 	volatile pcmconf8xx_t *pcmp =
-		(pcmconf8xx_t *)(&(((immap_t *)CFG_IMMR)->im_pcmcia));
+		(pcmconf8xx_t *)(&(((immap_t *)CONFIG_SYS_IMMR)->im_pcmcia));
 # endif
 
 	debug ("voltage_set: " PCMCIA_BOARD_MSG
diff --git a/drivers/qe/uec.c b/drivers/qe/uec.c
index 344c64999..bba3ef2c6 100644
--- a/drivers/qe/uec.c
+++ b/drivers/qe/uec.c
@@ -34,12 +34,12 @@
 #ifdef CONFIG_UEC_ETH1
 static uec_info_t eth1_uec_info = {
 	.uf_info		= {
-		.ucc_num	= CFG_UEC1_UCC_NUM,
-		.rx_clock	= CFG_UEC1_RX_CLK,
-		.tx_clock	= CFG_UEC1_TX_CLK,
-		.eth_type	= CFG_UEC1_ETH_TYPE,
+		.ucc_num	= CONFIG_SYS_UEC1_UCC_NUM,
+		.rx_clock	= CONFIG_SYS_UEC1_RX_CLK,
+		.tx_clock	= CONFIG_SYS_UEC1_TX_CLK,
+		.eth_type	= CONFIG_SYS_UEC1_ETH_TYPE,
 	},
-#if (CFG_UEC1_ETH_TYPE == FAST_ETH)
+#if (CONFIG_SYS_UEC1_ETH_TYPE == FAST_ETH)
 	.num_threads_tx		= UEC_NUM_OF_THREADS_1,
 	.num_threads_rx		= UEC_NUM_OF_THREADS_1,
 #else
@@ -50,19 +50,19 @@ static uec_info_t eth1_uec_info = {
 	.riscRx			= QE_RISC_ALLOCATION_RISC1_AND_RISC2,
 	.tx_bd_ring_len		= 16,
 	.rx_bd_ring_len		= 16,
-	.phy_address		= CFG_UEC1_PHY_ADDR,
-	.enet_interface		= CFG_UEC1_INTERFACE_MODE,
+	.phy_address		= CONFIG_SYS_UEC1_PHY_ADDR,
+	.enet_interface		= CONFIG_SYS_UEC1_INTERFACE_MODE,
 };
 #endif
 #ifdef CONFIG_UEC_ETH2
 static uec_info_t eth2_uec_info = {
 	.uf_info		= {
-		.ucc_num	= CFG_UEC2_UCC_NUM,
-		.rx_clock	= CFG_UEC2_RX_CLK,
-		.tx_clock	= CFG_UEC2_TX_CLK,
-		.eth_type	= CFG_UEC2_ETH_TYPE,
+		.ucc_num	= CONFIG_SYS_UEC2_UCC_NUM,
+		.rx_clock	= CONFIG_SYS_UEC2_RX_CLK,
+		.tx_clock	= CONFIG_SYS_UEC2_TX_CLK,
+		.eth_type	= CONFIG_SYS_UEC2_ETH_TYPE,
 	},
-#if (CFG_UEC2_ETH_TYPE == FAST_ETH)
+#if (CONFIG_SYS_UEC2_ETH_TYPE == FAST_ETH)
 	.num_threads_tx		= UEC_NUM_OF_THREADS_1,
 	.num_threads_rx		= UEC_NUM_OF_THREADS_1,
 #else
@@ -73,19 +73,19 @@ static uec_info_t eth2_uec_info = {
 	.riscRx			= QE_RISC_ALLOCATION_RISC1_AND_RISC2,
 	.tx_bd_ring_len		= 16,
 	.rx_bd_ring_len		= 16,
-	.phy_address		= CFG_UEC2_PHY_ADDR,
-	.enet_interface		= CFG_UEC2_INTERFACE_MODE,
+	.phy_address		= CONFIG_SYS_UEC2_PHY_ADDR,
+	.enet_interface		= CONFIG_SYS_UEC2_INTERFACE_MODE,
 };
 #endif
 #ifdef CONFIG_UEC_ETH3
 static uec_info_t eth3_uec_info = {
 	.uf_info		= {
-		.ucc_num	= CFG_UEC3_UCC_NUM,
-		.rx_clock	= CFG_UEC3_RX_CLK,
-		.tx_clock	= CFG_UEC3_TX_CLK,
-		.eth_type	= CFG_UEC3_ETH_TYPE,
+		.ucc_num	= CONFIG_SYS_UEC3_UCC_NUM,
+		.rx_clock	= CONFIG_SYS_UEC3_RX_CLK,
+		.tx_clock	= CONFIG_SYS_UEC3_TX_CLK,
+		.eth_type	= CONFIG_SYS_UEC3_ETH_TYPE,
 	},
-#if (CFG_UEC3_ETH_TYPE == FAST_ETH)
+#if (CONFIG_SYS_UEC3_ETH_TYPE == FAST_ETH)
 	.num_threads_tx		= UEC_NUM_OF_THREADS_1,
 	.num_threads_rx		= UEC_NUM_OF_THREADS_1,
 #else
@@ -96,19 +96,19 @@ static uec_info_t eth3_uec_info = {
 	.riscRx			= QE_RISC_ALLOCATION_RISC1_AND_RISC2,
 	.tx_bd_ring_len		= 16,
 	.rx_bd_ring_len		= 16,
-	.phy_address		= CFG_UEC3_PHY_ADDR,
-	.enet_interface		= CFG_UEC3_INTERFACE_MODE,
+	.phy_address		= CONFIG_SYS_UEC3_PHY_ADDR,
+	.enet_interface		= CONFIG_SYS_UEC3_INTERFACE_MODE,
 };
 #endif
 #ifdef CONFIG_UEC_ETH4
 static uec_info_t eth4_uec_info = {
 	.uf_info		= {
-		.ucc_num	= CFG_UEC4_UCC_NUM,
-		.rx_clock	= CFG_UEC4_RX_CLK,
-		.tx_clock	= CFG_UEC4_TX_CLK,
-		.eth_type	= CFG_UEC4_ETH_TYPE,
+		.ucc_num	= CONFIG_SYS_UEC4_UCC_NUM,
+		.rx_clock	= CONFIG_SYS_UEC4_RX_CLK,
+		.tx_clock	= CONFIG_SYS_UEC4_TX_CLK,
+		.eth_type	= CONFIG_SYS_UEC4_ETH_TYPE,
 	},
-#if (CFG_UEC4_ETH_TYPE == FAST_ETH)
+#if (CONFIG_SYS_UEC4_ETH_TYPE == FAST_ETH)
 	.num_threads_tx		= UEC_NUM_OF_THREADS_1,
 	.num_threads_rx		= UEC_NUM_OF_THREADS_1,
 #else
@@ -119,12 +119,58 @@ static uec_info_t eth4_uec_info = {
 	.riscRx			= QE_RISC_ALLOCATION_RISC1_AND_RISC2,
 	.tx_bd_ring_len		= 16,
 	.rx_bd_ring_len		= 16,
-	.phy_address		= CFG_UEC4_PHY_ADDR,
-	.enet_interface		= CFG_UEC4_INTERFACE_MODE,
+	.phy_address		= CONFIG_SYS_UEC4_PHY_ADDR,
+	.enet_interface		= CONFIG_SYS_UEC4_INTERFACE_MODE,
+};
+#endif
+#ifdef CONFIG_UEC_ETH5
+static uec_info_t eth5_uec_info = {
+	.uf_info		= {
+		.ucc_num	= CONFIG_SYS_UEC5_UCC_NUM,
+		.rx_clock	= CONFIG_SYS_UEC5_RX_CLK,
+		.tx_clock	= CONFIG_SYS_UEC5_TX_CLK,
+		.eth_type	= CONFIG_SYS_UEC5_ETH_TYPE,
+	},
+#if (CONFIG_SYS_UEC5_ETH_TYPE == FAST_ETH)
+	.num_threads_tx		= UEC_NUM_OF_THREADS_1,
+	.num_threads_rx		= UEC_NUM_OF_THREADS_1,
+#else
+	.num_threads_tx		= UEC_NUM_OF_THREADS_4,
+	.num_threads_rx		= UEC_NUM_OF_THREADS_4,
+#endif
+	.riscTx			= QE_RISC_ALLOCATION_RISC1_AND_RISC2,
+	.riscRx			= QE_RISC_ALLOCATION_RISC1_AND_RISC2,
+	.tx_bd_ring_len		= 16,
+	.rx_bd_ring_len		= 16,
+	.phy_address		= CONFIG_SYS_UEC5_PHY_ADDR,
+	.enet_interface		= CONFIG_SYS_UEC5_INTERFACE_MODE,
+};
+#endif
+#ifdef CONFIG_UEC_ETH6
+static uec_info_t eth6_uec_info = {
+	.uf_info		= {
+		.ucc_num	= CONFIG_SYS_UEC6_UCC_NUM,
+		.rx_clock	= CONFIG_SYS_UEC6_RX_CLK,
+		.tx_clock	= CONFIG_SYS_UEC6_TX_CLK,
+		.eth_type	= CONFIG_SYS_UEC6_ETH_TYPE,
+	},
+#if (CONFIG_SYS_UEC6_ETH_TYPE == FAST_ETH)
+	.num_threads_tx		= UEC_NUM_OF_THREADS_1,
+	.num_threads_rx		= UEC_NUM_OF_THREADS_1,
+#else
+	.num_threads_tx		= UEC_NUM_OF_THREADS_4,
+	.num_threads_rx		= UEC_NUM_OF_THREADS_4,
+#endif
+	.riscTx			= QE_RISC_ALLOCATION_RISC1_AND_RISC2,
+	.riscRx			= QE_RISC_ALLOCATION_RISC1_AND_RISC2,
+	.tx_bd_ring_len		= 16,
+	.rx_bd_ring_len		= 16,
+	.phy_address		= CONFIG_SYS_UEC6_PHY_ADDR,
+	.enet_interface		= CONFIG_SYS_UEC6_INTERFACE_MODE,
 };
 #endif
 
-#define MAXCONTROLLERS	(4)
+#define MAXCONTROLLERS	(6)
 
 static struct eth_device *devlist[MAXCONTROLLERS];
 
@@ -424,6 +470,7 @@ static int uec_set_mac_if_mode(uec_private_t *uec, enet_interface_e if_mode)
 			upsmr |= (UPSMR_RPM | UPSMR_TBIM);
 			break;
 		case ENET_1000_RGMII_RXID:
+		case ENET_1000_RGMII_ID:
 		case ENET_1000_RGMII:
 			maccfg2 |= MACCFG2_INTERFACE_MODE_BYTE;
 			upsmr |= UPSMR_RPM;
@@ -639,6 +686,31 @@ static void phy_change(struct eth_device *dev)
 	&& !defined(BITBANGMII)
 
 /*
+ * Find a device index from the devlist by name
+ *
+ * Returns:
+ *  The index where the device is located, -1 on error
+ */
+static int uec_miiphy_find_dev_by_name(char *devname)
+{
+	int i;
+
+	for (i = 0; i < MAXCONTROLLERS; i++) {
+		if (strncmp(devname, devlist[i]->name, strlen(devname)) == 0) {
+			break;
+		}
+	}
+
+	/* If device cannot be found, returns -1 */
+	if (i == MAXCONTROLLERS) {
+		debug ("%s: device %s not found in devlist\n", __FUNCTION__, devname);
+		i = -1;
+	}
+
+	return i;
+}
+
+/*
  * Read a MII PHY register.
  *
  * Returns:
@@ -647,8 +719,16 @@ static void phy_change(struct eth_device *dev)
 static int uec_miiphy_read(char *devname, unsigned char addr,
 			    unsigned char reg, unsigned short *value)
 {
-	*value = uec_read_phy_reg(devlist[0], addr, reg);
+	int devindex = 0;
 
+	if (devname == NULL || value == NULL) {
+		debug("%s: NULL pointer given\n", __FUNCTION__);
+	} else {
+		devindex = uec_miiphy_find_dev_by_name(devname);
+		if (devindex >= 0) {
+			*value = uec_read_phy_reg(devlist[devindex], addr, reg);
+		}
+	}
 	return 0;
 }
 
@@ -661,11 +741,18 @@ static int uec_miiphy_read(char *devname, unsigned char addr,
 static int uec_miiphy_write(char *devname, unsigned char addr,
 			     unsigned char reg, unsigned short value)
 {
-	uec_write_phy_reg(devlist[0], addr, reg, value);
+	int devindex = 0;
 
+	if (devname == NULL) {
+		debug("%s: NULL pointer given\n", __FUNCTION__);
+	} else {
+		devindex = uec_miiphy_find_dev_by_name(devname);
+		if (devindex >= 0) {
+			uec_write_phy_reg(devlist[devindex], addr, reg, value);
+		}
+	}
 	return 0;
 }
-
 #endif
 
 static int uec_set_mac_address(uec_private_t *uec, u8 *mac_addr)
@@ -1368,6 +1455,14 @@ int uec_initialize(int index)
 #ifdef CONFIG_UEC_ETH4
 		uec_info = &eth4_uec_info;
 #endif
+	} else if (index == 4) {
+#ifdef CONFIG_UEC_ETH5
+		uec_info = &eth5_uec_info;
+#endif
+	} else if (index == 5) {
+#ifdef CONFIG_UEC_ETH6
+		uec_info = &eth6_uec_info;
+#endif
 	} else {
 		printf("%s: index is illegal.\n", __FUNCTION__);
 		return -EINVAL;
diff --git a/drivers/qe/uec.h b/drivers/qe/uec.h
index e357a92bb..0b644996b 100644
--- a/drivers/qe/uec.h
+++ b/drivers/qe/uec.h
@@ -642,6 +642,7 @@ typedef enum enet_interface {
 	ENET_100_RGMII,
 	ENET_1000_GMII,
 	ENET_1000_RGMII,
+	ENET_1000_RGMII_ID,
 	ENET_1000_RGMII_RXID,
 	ENET_1000_TBI,
 	ENET_1000_RTBI
diff --git a/drivers/qe/uec_phy.c b/drivers/qe/uec_phy.c
index 186922e0c..829f08285 100644
--- a/drivers/qe/uec_phy.c
+++ b/drivers/qe/uec_phy.c
@@ -44,6 +44,54 @@
 #define ugphy_vdbg(ugeth, fmt, args...) do { } while (0)
 #endif /* UEC_VERBOSE_DEBUG */
 
+/*--------------------------------------------------------------------+
+ * Fixed PHY (PHY-less) support for Ethernet Ports.
+ *
+ * Copied from cpu/ppc4xx/4xx_enet.c
+ *--------------------------------------------------------------------*/
+
+/*
+ * Some boards do not have a PHY for each ethernet port. These ports
+ * are known as Fixed PHY (or PHY-less) ports. For such ports, set
+ * the appropriate CONFIG_PHY_ADDR equal to CONFIG_FIXED_PHY and
+ * then define CONFIG_SYS_FIXED_PHY_PORTS to define what the speed and
+ * duplex should be for these ports in the board configuration
+ * file.
+ *
+ * For Example:
+ *     #define CONFIG_FIXED_PHY   0xFFFFFFFF
+ *
+ *     #define CONFIG_PHY_ADDR    CONFIG_FIXED_PHY
+ *     #define CONFIG_PHY1_ADDR   1
+ *     #define CONFIG_PHY2_ADDR   CONFIG_FIXED_PHY
+ *     #define CONFIG_PHY3_ADDR   3
+ *
+ *     #define CONFIG_SYS_FIXED_PHY_PORT(devnum,speed,duplex) \
+ *                     {devnum, speed, duplex},
+ *
+ *     #define CONFIG_SYS_FIXED_PHY_PORTS \
+ *                     CONFIG_SYS_FIXED_PHY_PORT(0,SPEED_100,DUPLEX_FULL) \
+ *                     CONFIG_SYS_FIXED_PHY_PORT(2,SPEED_100,DUPLEX_HALF)
+ */
+
+#ifndef CONFIG_FIXED_PHY
+#define CONFIG_FIXED_PHY	0xFFFFFFFF /* Fixed PHY (PHY-less) */
+#endif
+
+#ifndef CONFIG_SYS_FIXED_PHY_PORTS
+#define CONFIG_SYS_FIXED_PHY_PORTS	/* default is an empty array */
+#endif
+
+struct fixed_phy_port {
+	unsigned int devnum;	/* ethernet port */
+	unsigned int speed;	/* specified speed 10,100 or 1000 */
+	unsigned int duplex;	/* specified duplex FULL or HALF */
+};
+
+static const struct fixed_phy_port fixed_phy_port[] = {
+	CONFIG_SYS_FIXED_PHY_PORTS /* defined in board configuration file */
+};
+
 static void config_genmii_advert (struct uec_mii_info *mii_info);
 static void genmii_setup_forced (struct uec_mii_info *mii_info);
 static void genmii_restart_aneg (struct uec_mii_info *mii_info);
@@ -376,6 +424,29 @@ static int bcm_init(struct uec_mii_info *mii_info)
 	 return 0;
 }
 
+static int marvell_init(struct uec_mii_info *mii_info)
+{
+	struct eth_device *edev = mii_info->dev;
+	uec_private_t *uec = edev->priv;
+
+	if (uec->uec_info->enet_interface == ENET_1000_RGMII_ID) {
+		int temp;
+
+		temp = phy_read(mii_info, MII_M1111_PHY_EXT_CR);
+		temp |= (MII_M1111_RX_DELAY | MII_M1111_TX_DELAY);
+		phy_write(mii_info, MII_M1111_PHY_EXT_CR, temp);
+
+		temp = phy_read(mii_info, MII_M1111_PHY_EXT_SR);
+		temp &= ~MII_M1111_HWCFG_MODE_MASK;
+		temp |= MII_M1111_HWCFG_MODE_RGMII;
+		phy_write(mii_info, MII_M1111_PHY_EXT_SR, temp);
+
+		phy_write(mii_info, PHY_BMCR, PHY_BMCR_RESET);
+	}
+
+	return 0;
+}
+
 static int marvell_read_status (struct uec_mii_info *mii_info)
 {
 	u16 status;
@@ -510,6 +581,28 @@ static void dm9161_close (struct uec_mii_info *mii_info)
 {
 }
 
+static int fixed_phy_aneg (struct uec_mii_info *mii_info)
+{
+	mii_info->autoneg = 0; /* Turn off auto negotiation for fixed phy */
+	return 0;
+}
+
+static int fixed_phy_read_status (struct uec_mii_info *mii_info)
+{
+	int i = 0;
+
+	for (i = 0; i < ARRAY_SIZE(fixed_phy_port); i++) {
+		if (mii_info->mii_id == fixed_phy_port[i].devnum) {
+			mii_info->speed = fixed_phy_port[i].speed;
+			mii_info->duplex = fixed_phy_port[i].duplex;
+			mii_info->link = 1; /* Link is always UP */
+			mii_info->pause = 0;
+			break;
+		}
+	}
+	return 0;
+}
+
 static struct phy_info phy_info_dm9161 = {
 	.phy_id = 0x0181b880,
 	.phy_id_mask = 0x0ffffff0,
@@ -538,6 +631,7 @@ static struct phy_info phy_info_marvell = {
 	.phy_id_mask = 0xffffff00,
 	.name = "Marvell 88E11x1",
 	.features = MII_GBIT_FEATURES,
+	.init = &marvell_init,
 	.config_aneg = &marvell_config_aneg,
 	.read_status = &marvell_read_status,
 	.ack_interrupt = &marvell_ack_interrupt,
@@ -553,6 +647,14 @@ static struct phy_info phy_info_bcm5481 = {
 	.init = bcm_init,
 };
 
+static struct phy_info phy_info_fixedphy = {
+	.phy_id = CONFIG_FIXED_PHY,
+	.phy_id_mask = CONFIG_FIXED_PHY,
+	.name = "Fixed PHY",
+	.config_aneg = fixed_phy_aneg,
+	.read_status = fixed_phy_read_status,
+};
+
 static struct phy_info phy_info_genmii = {
 	.phy_id = 0x00000000,
 	.phy_id_mask = 0x00000000,
@@ -567,6 +669,7 @@ static struct phy_info *phy_info[] = {
 	&phy_info_dm9161a,
 	&phy_info_marvell,
 	&phy_info_bcm5481,
+	&phy_info_fixedphy,
 	&phy_info_genmii,
 	NULL
 };
diff --git a/drivers/qe/uec_phy.h b/drivers/qe/uec_phy.h
index 6f769fb50..7ac1ff932 100644
--- a/drivers/qe/uec_phy.h
+++ b/drivers/qe/uec_phy.h
@@ -77,6 +77,14 @@
 #define MII_M1011_IMASK_INIT		0x6400
 #define MII_M1011_IMASK_CLEAR		0x0000
 
+/* 88E1111 PHY Register */
+#define MII_M1111_PHY_EXT_CR            0x14
+#define MII_M1111_RX_DELAY              0x80
+#define MII_M1111_TX_DELAY              0x2
+#define MII_M1111_PHY_EXT_SR            0x1b
+#define MII_M1111_HWCFG_MODE_MASK       0xf
+#define MII_M1111_HWCFG_MODE_RGMII      0xb
+
 #define MII_DM9161_SCR			0x10
 #define MII_DM9161_SCR_INIT		0x0610
 #define MII_DM9161_SCR_RMII_INIT	0x0710
diff --git a/drivers/rtc/Makefile b/drivers/rtc/Makefile
index f41f33d6e..94bc518a5 100644
--- a/drivers/rtc/Makefile
+++ b/drivers/rtc/Makefile
@@ -32,8 +32,8 @@ COBJS-y += date.o
 COBJS-$(CONFIG_RTC_DS12887) += ds12887.o
 COBJS-$(CONFIG_RTC_DS1302) += ds1302.o
 COBJS-$(CONFIG_RTC_DS1306) += ds1306.o
-COBJS-$(CONFIG_RTC_DS1307)$(CONFIG_RTC_DS1338) += ds1307.o
-COBJS-y += $(COBJS-yy)
+COBJS-$(CONFIG_RTC_DS1307) += ds1307.o
+COBJS-$(CONFIG_RTC_DS1338) += ds1307.o
 COBJS-$(CONFIG_RTC_DS1337) += ds1337.o
 COBJS-$(CONFIG_RTC_DS1374) += ds1374.o
 COBJS-$(CONFIG_RTC_DS1556) += ds1556.o
@@ -59,7 +59,7 @@ COBJS-$(CONFIG_RTC_RX8025) += rx8025.o
 COBJS-$(CONFIG_RTC_S3C24X0) += s3c24x0_rtc.o
 COBJS-$(CONFIG_RTC_X1205) += x1205.o
 
-COBJS	:= $(COBJS-y)
+COBJS	:= $(sort $(COBJS-y))
 SRCS	:= $(COBJS:.o=.c)
 OBJS	:= $(addprefix $(obj),$(COBJS))
 
diff --git a/drivers/rtc/bfin_rtc.c b/drivers/rtc/bfin_rtc.c
index ee8acd359..5de695384 100644
--- a/drivers/rtc/bfin_rtc.c
+++ b/drivers/rtc/bfin_rtc.c
@@ -26,10 +26,17 @@
 #define NUM_SECS_IN_HR    HRS_TO_SECS(1)
 #define NUM_SECS_IN_DAY   DAYS_TO_SECS(1)
 
+/* Enable the RTC prescaler enable register */
+static void rtc_init(void)
+{
+	if (!(bfin_read_RTC_PREN() & 0x1))
+		bfin_write_RTC_PREN(0x1);
+}
+
 /* Our on-chip RTC has no notion of "reset" */
 void rtc_reset(void)
 {
-	return;
+	rtc_init();
 }
 
 /* Wait for pending writes to complete */
@@ -42,18 +49,10 @@ static void wait_for_complete(void)
 	bfin_write_RTC_ISTAT(WRITE_COMPLETE);
 }
 
-/* Enable the RTC prescaler enable register */
-int rtc_init(void)
-{
-	pr_stamp();
-	bfin_write_RTC_PREN(0x1);
-	return 0;
-}
-
 /* Set the time. Get the time_in_secs which is the number of seconds since Jan 1970 and set the RTC registers
  * based on this value.
  */
-void rtc_set(struct rtc_time *tmp)
+int rtc_set(struct rtc_time *tmp)
 {
 	unsigned long remain, days, hrs, mins, secs;
 
@@ -61,9 +60,10 @@ void rtc_set(struct rtc_time *tmp)
 
 	if (tmp == NULL) {
 		puts("Error setting the date/time\n");
-		return;
+		return -1;
 	}
 
+	rtc_init();
 	wait_for_complete();
 
 	/* Calculate number of seconds this incoming time represents */
@@ -82,6 +82,8 @@ void rtc_set(struct rtc_time *tmp)
 
 	/* Encode these time values into our RTC_STAT register */
 	bfin_write_RTC_STAT(SET_ALARM(days, hrs, mins, secs));
+
+	return 0;
 }
 
 /* Read the time from the RTC_STAT. time_in_seconds is seconds since Jan 1970 */
@@ -98,6 +100,7 @@ int rtc_get(struct rtc_time *tmp)
 		return -1;
 	}
 
+	rtc_init();
 	wait_for_complete();
 
 	/* Read the RTC_STAT register */
diff --git a/drivers/rtc/ds12887.c b/drivers/rtc/ds12887.c
index fb1825bf1..25ca1333e 100644
--- a/drivers/rtc/ds12887.c
+++ b/drivers/rtc/ds12887.c
@@ -154,7 +154,7 @@ else
 	return 0;
 }
 
-void rtc_set (struct rtc_time *tmp)
+int rtc_set (struct rtc_time *tmp)
 {
 	uchar save_ctrl_b;
 	uchar sec, min, hour, mday, wday, mon, year;
@@ -202,6 +202,8 @@ void rtc_set (struct rtc_time *tmp)
 	/* enables the RTC to update the regs */
 	save_ctrl_b &= ~RTC_CB_SET;
 	rtc_write(RTC_CONTROL_B, save_ctrl_b);
+
+	return 0;
 }
 
 void rtc_reset (void)
diff --git a/drivers/rtc/ds1302.c b/drivers/rtc/ds1302.c
index d28a9fd72..87ddd0191 100644
--- a/drivers/rtc/ds1302.c
+++ b/drivers/rtc/ds1302.c
@@ -287,8 +287,7 @@ rtc_get(struct rtc_time *tmp)
 	return rel;
 }
 
-void
-rtc_set(struct rtc_time *tmp)
+int rtc_set(struct rtc_time *tmp)
 {
 	struct ds1302_st bbclk;
 	unsigned char b=0;
@@ -326,6 +325,8 @@ rtc_set(struct rtc_time *tmp)
 
 	write_ser_drv(0x8e,&b,1);           /* disable write protect */
 	write_ser_drv(0xbe,(unsigned char *)&bbclk, 8);     /* write burst */
+
+	return 0;
 }
 
 #endif
diff --git a/drivers/rtc/ds1306.c b/drivers/rtc/ds1306.c
index 12528ed1c..75f88a9a5 100644
--- a/drivers/rtc/ds1306.c
+++ b/drivers/rtc/ds1306.c
@@ -86,7 +86,7 @@ static void init_spi (void);
 /* read clock time from DS1306 and return it in *tmp */
 int rtc_get (struct rtc_time *tmp)
 {
-	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
 	unsigned char spi_byte;	/* Data Byte */
 
 	init_spi ();		/* set port B for software SPI */
@@ -141,9 +141,9 @@ int rtc_get (struct rtc_time *tmp)
 /* ------------------------------------------------------------------------- */
 
 /* set clock time in DS1306 RTC and in MPC8xx RTC */
-void rtc_set (struct rtc_time *tmp)
+int rtc_set (struct rtc_time *tmp)
 {
-	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
 
 	init_spi ();		/* set port B for software SPI */
 
@@ -209,6 +209,8 @@ void rtc_set (struct rtc_time *tmp)
 	debug ("Set DATE: %4d-%02d-%02d (wday=%d)  TIME: %2d:%02d:%02d\n",
 	       tmp->tm_year, tmp->tm_mon, tmp->tm_mday, tmp->tm_wday,
 	       tmp->tm_hour, tmp->tm_min, tmp->tm_sec);
+
+	return 0;
 }
 
 /* ------------------------------------------------------------------------- */
@@ -216,7 +218,7 @@ void rtc_set (struct rtc_time *tmp)
 /* Initialize Port B for software SPI */
 static void init_spi (void)
 {
-	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
 
 	/* Force output pins to begin at logic 0 */
 	immap->im_cpm.cp_pbdat &= ~(PB_SPI_CE | PB_SPIMOSI | PB_SPISCK);
@@ -233,7 +235,7 @@ static void init_spi (void)
 /* NOTE: soft_spi_send() assumes that the I/O lines are configured already */
 static void soft_spi_send (unsigned char n)
 {
-	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
 	unsigned char bitpos;	/* bit position to receive */
 	unsigned char i;	/* Loop Control */
 
@@ -262,7 +264,7 @@ static void soft_spi_send (unsigned char n)
 /* NOTE: soft_spi_read() assumes that the I/O lines are configured already */
 static unsigned char soft_spi_read (void)
 {
-	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
 
 	unsigned char spi_byte = 0;	/* Return value, assume success */
 	unsigned char bitpos;	/* bit position to receive */
@@ -312,7 +314,7 @@ int rtc_get (struct rtc_time *tmp)
 	 * step just once.
 	 */
 	if (!slave) {
-		slave = spi_setup_slave(0, CFG_SPI_RTC_DEVID, 600000,
+		slave = spi_setup_slave(0, CONFIG_SYS_SPI_RTC_DEVID, 600000,
 				SPI_MODE_3 | SPI_CS_HIGH);
 		if (!slave)
 			return;
@@ -371,11 +373,11 @@ int rtc_get (struct rtc_time *tmp)
 /* ------------------------------------------------------------------------- */
 
 /* set clock time from *tmp in DS1306 RTC */
-void rtc_set (struct rtc_time *tmp)
+int rtc_set (struct rtc_time *tmp)
 {
 	/* Assuming Vcc = 2.0V (lowest speed) */
 	if (!slave) {
-		slave = spi_setup_slave(0, CFG_SPI_RTC_DEVID, 600000,
+		slave = spi_setup_slave(0, CONFIG_SYS_SPI_RTC_DEVID, 600000,
 				SPI_MODE_3 | SPI_CS_HIGH);
 		if (!slave)
 			return;
@@ -406,7 +408,7 @@ void rtc_reset (void)
 {
 	/* Assuming Vcc = 2.0V (lowest speed) */
 	if (!slave) {
-		slave = spi_setup_slave(0, CFG_SPI_RTC_DEVID, 600000,
+		slave = spi_setup_slave(0, CONFIG_SYS_SPI_RTC_DEVID, 600000,
 				SPI_MODE_3 | SPI_CS_HIGH);
 		if (!slave)
 			return;
diff --git a/drivers/rtc/ds1307.c b/drivers/rtc/ds1307.c
index 11fc14f3f..0650d915a 100644
--- a/drivers/rtc/ds1307.c
+++ b/drivers/rtc/ds1307.c
@@ -47,11 +47,11 @@
 #endif
 /*---------------------------------------------------------------------*/
 
-#ifndef CFG_I2C_RTC_ADDR
-# define CFG_I2C_RTC_ADDR	0x68
+#ifndef CONFIG_SYS_I2C_RTC_ADDR
+# define CONFIG_SYS_I2C_RTC_ADDR	0x68
 #endif
 
-#if defined(CONFIG_RTC_DS1307) && (CFG_I2C_SPEED > 100000)
+#if defined(CONFIG_RTC_DS1307) && (CONFIG_SYS_I2C_SPEED > 100000)
 # error The DS1307 is specified only up to 100kHz!
 #endif
 
@@ -128,7 +128,7 @@ int rtc_get (struct rtc_time *tmp)
 /*
  * Set the RTC
  */
-void rtc_set (struct rtc_time *tmp)
+int rtc_set (struct rtc_time *tmp)
 {
 	DEBUGR ("Set DATE: %4d-%02d-%02d (wday=%d)  TIME: %2d:%02d:%02d\n",
 		tmp->tm_year, tmp->tm_mon, tmp->tm_mday, tmp->tm_wday,
@@ -144,6 +144,8 @@ void rtc_set (struct rtc_time *tmp)
 	rtc_write (RTC_HR_REG_ADDR, bin2bcd (tmp->tm_hour));
 	rtc_write (RTC_MIN_REG_ADDR, bin2bcd (tmp->tm_min));
 	rtc_write (RTC_SEC_REG_ADDR, bin2bcd (tmp->tm_sec));
+
+	return 0;
 }
 
 
@@ -185,13 +187,13 @@ void rtc_reset (void)
 static
 uchar rtc_read (uchar reg)
 {
-	return (i2c_reg_read (CFG_I2C_RTC_ADDR, reg));
+	return (i2c_reg_read (CONFIG_SYS_I2C_RTC_ADDR, reg));
 }
 
 
 static void rtc_write (uchar reg, uchar val)
 {
-	i2c_reg_write (CFG_I2C_RTC_ADDR, reg, val);
+	i2c_reg_write (CONFIG_SYS_I2C_RTC_ADDR, reg, val);
 }
 
 static unsigned bcd2bin (uchar n)
diff --git a/drivers/rtc/ds1337.c b/drivers/rtc/ds1337.c
index df1132a1f..58e3966ec 100644
--- a/drivers/rtc/ds1337.c
+++ b/drivers/rtc/ds1337.c
@@ -132,7 +132,7 @@ int rtc_get (struct rtc_time *tmp)
 /*
  * Set the RTC
  */
-void rtc_set (struct rtc_time *tmp)
+int rtc_set (struct rtc_time *tmp)
 {
 	uchar century;
 
@@ -150,6 +150,8 @@ void rtc_set (struct rtc_time *tmp)
 	rtc_write (RTC_HR_REG_ADDR, bin2bcd (tmp->tm_hour));
 	rtc_write (RTC_MIN_REG_ADDR, bin2bcd (tmp->tm_min));
 	rtc_write (RTC_SEC_REG_ADDR, bin2bcd (tmp->tm_sec));
+
+	return 0;
 }
 
 
@@ -158,10 +160,10 @@ void rtc_set (struct rtc_time *tmp)
  * SQW/INTB* pin and program it for 32,768 Hz output. Note that
  * according to the datasheet, turning on the square wave output
  * increases the current drain on the backup battery from about
- * 600 nA to 2uA. Define CFG_RTC_DS1337_NOOSC if you wish to turn
+ * 600 nA to 2uA. Define CONFIG_SYS_RTC_DS1337_NOOSC if you wish to turn
  * off the OSC output.
  */
-#ifdef CFG_RTC_DS1337_NOOSC
+#ifdef CONFIG_SYS_RTC_DS1337_NOOSC
  #define RTC_DS1337_RESET_VAL \
 	(RTC_CTL_BIT_INTCN | RTC_CTL_BIT_RS1 | RTC_CTL_BIT_RS2)
 #else
@@ -180,13 +182,13 @@ void rtc_reset (void)
 static
 uchar rtc_read (uchar reg)
 {
-	return (i2c_reg_read (CFG_I2C_RTC_ADDR, reg));
+	return (i2c_reg_read (CONFIG_SYS_I2C_RTC_ADDR, reg));
 }
 
 
 static void rtc_write (uchar reg, uchar val)
 {
-	i2c_reg_write (CFG_I2C_RTC_ADDR, reg, val);
+	i2c_reg_write (CONFIG_SYS_I2C_RTC_ADDR, reg, val);
 }
 
 static unsigned bcd2bin (uchar n)
diff --git a/drivers/rtc/ds1374.c b/drivers/rtc/ds1374.c
index 130588ca1..d61a2289f 100644
--- a/drivers/rtc/ds1374.c
+++ b/drivers/rtc/ds1374.c
@@ -48,11 +48,11 @@
 #endif
 /*---------------------------------------------------------------------*/
 
-#ifndef CFG_I2C_RTC_ADDR
-# define CFG_I2C_RTC_ADDR	0x68
+#ifndef CONFIG_SYS_I2C_RTC_ADDR
+# define CONFIG_SYS_I2C_RTC_ADDR	0x68
 #endif
 
-#if defined(CONFIG_RTC_DS1374) && (CFG_I2C_SPEED > 400000)
+#if defined(CONFIG_RTC_DS1374) && (CONFIG_SYS_I2C_SPEED > 400000)
 # error The DS1374 is specified up to 400kHz in fast mode!
 #endif
 
@@ -160,7 +160,7 @@ int rtc_get (struct rtc_time *tm){
 /*
  * Set the RTC
  */
-void rtc_set (struct rtc_time *tmp){
+int rtc_set (struct rtc_time *tmp){
 
 	unsigned long time;
 	unsigned i;
@@ -186,6 +186,8 @@ void rtc_set (struct rtc_time *tmp){
 
 	/* Start clock */
 	rtc_write(RTC_CTL_ADDR, RTC_CTL_BIT_EN_OSC, FALSE);
+
+	return 0;
 }
 
 /*
@@ -237,22 +239,22 @@ void rtc_reset (void){
  */
 static uchar rtc_read (uchar reg)
 {
-	return (i2c_reg_read (CFG_I2C_RTC_ADDR, reg));
+	return (i2c_reg_read (CONFIG_SYS_I2C_RTC_ADDR, reg));
 }
 
 static void rtc_write (uchar reg, uchar val, boolean_t set)
 {
 	if (set == TRUE) {
-		val |= i2c_reg_read (CFG_I2C_RTC_ADDR, reg);
-		i2c_reg_write (CFG_I2C_RTC_ADDR, reg, val);
+		val |= i2c_reg_read (CONFIG_SYS_I2C_RTC_ADDR, reg);
+		i2c_reg_write (CONFIG_SYS_I2C_RTC_ADDR, reg, val);
 	} else {
-		val = i2c_reg_read (CFG_I2C_RTC_ADDR, reg) & ~val;
-		i2c_reg_write (CFG_I2C_RTC_ADDR, reg, val);
+		val = i2c_reg_read (CONFIG_SYS_I2C_RTC_ADDR, reg) & ~val;
+		i2c_reg_write (CONFIG_SYS_I2C_RTC_ADDR, reg, val);
 	}
 }
 
 static void rtc_write_raw (uchar reg, uchar val)
 {
-		i2c_reg_write (CFG_I2C_RTC_ADDR, reg, val);
+		i2c_reg_write (CONFIG_SYS_I2C_RTC_ADDR, reg, val);
 }
 #endif
diff --git a/drivers/rtc/ds1556.c b/drivers/rtc/ds1556.c
index f95f28ed4..763d22a03 100644
--- a/drivers/rtc/ds1556.c
+++ b/drivers/rtc/ds1556.c
@@ -43,7 +43,7 @@ static void  rtc_write( unsigned int addr, uchar val);
 static uchar bin2bcd   (unsigned int n);
 static unsigned bcd2bin(uchar c);
 
-#define RTC_BASE		( CFG_NVRAM_SIZE + CFG_NVRAM_BASE_ADDR )
+#define RTC_BASE		( CONFIG_SYS_NVRAM_SIZE + CONFIG_SYS_NVRAM_BASE_ADDR )
 
 #define RTC_YEAR		( RTC_BASE + 0xf )
 #define RTC_MONTH		( RTC_BASE + 0xe )
@@ -120,7 +120,7 @@ int rtc_get( struct rtc_time *tmp )
 	return 0;
 }
 
-void rtc_set( struct rtc_time *tmp )
+int rtc_set( struct rtc_time *tmp )
 {
 	uchar reg_a;
 #ifdef RTC_DEBUG
@@ -146,6 +146,8 @@ void rtc_set( struct rtc_time *tmp )
 
 	/* unlock clock registers after read */
 	rtc_write( RTC_CONTROLA, ( reg_a  & ~RTC_CA_WRITE ));
+
+	return 0;
 }
 
 void rtc_reset (void)
diff --git a/drivers/rtc/ds164x.c b/drivers/rtc/ds164x.c
index c621a9eb8..1e96679de 100644
--- a/drivers/rtc/ds164x.c
+++ b/drivers/rtc/ds164x.c
@@ -49,7 +49,7 @@ static unsigned bcd2bin(uchar c);
 /*
  * DS164x registers layout
  */
-#define RTC_BASE		( CFG_NVRAM_BASE_ADDR + CFG_NVRAM_SIZE )
+#define RTC_BASE		( CONFIG_SYS_NVRAM_BASE_ADDR + CONFIG_SYS_NVRAM_SIZE )
 
 #define RTC_YEAR		( RTC_BASE + 0x07 )
 #define RTC_MONTH		( RTC_BASE + 0x06 )
@@ -119,7 +119,7 @@ int rtc_get( struct rtc_time *tmp )
 	return 0;
 }
 
-void rtc_set( struct rtc_time *tmp )
+int rtc_set( struct rtc_time *tmp )
 {
 	uchar reg_a;
 
@@ -145,6 +145,8 @@ void rtc_set( struct rtc_time *tmp )
 
 	/* unlock clock registers after read */
 	rtc_write( RTC_CONTROLA, ( reg_a  & ~RTC_CA_WRITE ));
+
+	return 0;
 }
 
 void rtc_reset (void)
diff --git a/drivers/rtc/ds174x.c b/drivers/rtc/ds174x.c
index 3f486b1b4..738d1185c 100644
--- a/drivers/rtc/ds174x.c
+++ b/drivers/rtc/ds174x.c
@@ -40,7 +40,7 @@ static void  rtc_write( unsigned int addr, uchar val);
 static uchar bin2bcd   (unsigned int n);
 static unsigned bcd2bin(uchar c);
 
-#define RTC_BASE		( CFG_NVRAM_SIZE + CFG_NVRAM_BASE_ADDR )
+#define RTC_BASE		( CONFIG_SYS_NVRAM_SIZE + CONFIG_SYS_NVRAM_BASE_ADDR )
 
 #define RTC_YEAR		( RTC_BASE + 7 )
 #define RTC_MONTH		( RTC_BASE + 6 )
@@ -117,7 +117,7 @@ int rtc_get( struct rtc_time *tmp )
 	return 0;
 }
 
-void rtc_set( struct rtc_time *tmp )
+int rtc_set( struct rtc_time *tmp )
 {
 	uchar reg_a;
 #ifdef RTC_DEBUG
@@ -143,6 +143,8 @@ void rtc_set( struct rtc_time *tmp )
 
 	/* unlock clock registers after read */
 	rtc_write( RTC_CONTROLA, ( reg_a  & ~RTC_CA_WRITE ));
+
+	return 0;
 }
 
 void rtc_reset (void)
diff --git a/drivers/rtc/ds3231.c b/drivers/rtc/ds3231.c
index d8cd47dac..ef033588a 100644
--- a/drivers/rtc/ds3231.c
+++ b/drivers/rtc/ds3231.c
@@ -134,7 +134,7 @@ int rtc_get (struct rtc_time *tmp)
 /*
  * Set the RTC
  */
-void rtc_set (struct rtc_time *tmp)
+int rtc_set (struct rtc_time *tmp)
 {
 	uchar century;
 
@@ -152,6 +152,8 @@ void rtc_set (struct rtc_time *tmp)
 	rtc_write (RTC_HR_REG_ADDR, bin2bcd (tmp->tm_hour));
 	rtc_write (RTC_MIN_REG_ADDR, bin2bcd (tmp->tm_min));
 	rtc_write (RTC_SEC_REG_ADDR, bin2bcd (tmp->tm_sec));
+
+	return 0;
 }
 
 
@@ -175,13 +177,13 @@ void rtc_reset (void)
 static
 uchar rtc_read (uchar reg)
 {
-	return (i2c_reg_read (CFG_I2C_RTC_ADDR, reg));
+	return (i2c_reg_read (CONFIG_SYS_I2C_RTC_ADDR, reg));
 }
 
 
 static void rtc_write (uchar reg, uchar val)
 {
-	i2c_reg_write (CFG_I2C_RTC_ADDR, reg, val);
+	i2c_reg_write (CONFIG_SYS_I2C_RTC_ADDR, reg, val);
 }
 
 static unsigned bcd2bin (uchar n)
diff --git a/drivers/rtc/isl1208.c b/drivers/rtc/isl1208.c
index 3d46fd065..71f63d5fa 100644
--- a/drivers/rtc/isl1208.c
+++ b/drivers/rtc/isl1208.c
@@ -118,7 +118,7 @@ int rtc_get (struct rtc_time *tmp)
 /*
  * Set the RTC
  */
-void rtc_set (struct rtc_time *tmp)
+int rtc_set (struct rtc_time *tmp)
 {
 	DEBUGR ("Set DATE: %4d-%02d-%02d (wday=%d)  TIME: %2d:%02d:%02d\n",
 		tmp->tm_year, tmp->tm_mon, tmp->tm_mday, tmp->tm_wday,
@@ -139,6 +139,8 @@ void rtc_set (struct rtc_time *tmp)
 	/* disable write */
 	rtc_write(RTC_STAT_REG_ADDR,
 		rtc_read(RTC_STAT_REG_ADDR) & ~RTC_STAT_BIT_WRTC);
+
+	return 0;
 }
 
 void rtc_reset (void)
@@ -151,12 +153,12 @@ void rtc_reset (void)
 
 static uchar rtc_read (uchar reg)
 {
-	return (i2c_reg_read (CFG_I2C_RTC_ADDR, reg));
+	return (i2c_reg_read (CONFIG_SYS_I2C_RTC_ADDR, reg));
 }
 
 static void rtc_write (uchar reg, uchar val)
 {
-	i2c_reg_write (CFG_I2C_RTC_ADDR, reg, val);
+	i2c_reg_write (CONFIG_SYS_I2C_RTC_ADDR, reg, val);
 }
 
 static unsigned bcd2bin (uchar n)
diff --git a/drivers/rtc/m41t11.c b/drivers/rtc/m41t11.c
index 372731005..3a77c1b63 100644
--- a/drivers/rtc/m41t11.c
+++ b/drivers/rtc/m41t11.c
@@ -35,15 +35,15 @@
 	is what should be done.
 
 #define CONFIG_RTC_M41T11 1
-#define CFG_I2C_RTC_ADDR 0x68
+#define CONFIG_SYS_I2C_RTC_ADDR 0x68
 #if 0
-#define CFG_M41T11_EXT_CENTURY_DATA
+#define CONFIG_SYS_M41T11_EXT_CENTURY_DATA
 #else
-#define CFG_M41T11_BASE_YEAR 2000
+#define CONFIG_SYS_M41T11_BASE_YEAR 2000
 #endif
 */
 
-#if defined(CFG_I2C_RTC_ADDR) && defined(CONFIG_CMD_DATE)
+#if defined(CONFIG_SYS_I2C_RTC_ADDR) && defined(CONFIG_CMD_DATE)
 
 static unsigned bcd2bin (uchar n)
 {
@@ -75,7 +75,7 @@ static unsigned char bin2bcd (unsigned int n)
 #define RTC_CONTROL_ADDR   0x7
 
 
-#ifndef CFG_M41T11_EXT_CENTURY_DATA
+#ifndef CONFIG_SYS_M41T11_EXT_CENTURY_DATA
 
 #define REG_CNT            (RTC_REG_CNT+1)
 
@@ -83,8 +83,8 @@ static unsigned char bin2bcd (unsigned int n)
   you only get 00-99 for the year we will asume you
   want from the year 2000 if you don't set the config
 */
-#ifndef CFG_M41T11_BASE_YEAR
-#define CFG_M41T11_BASE_YEAR 2000
+#ifndef CONFIG_SYS_M41T11_BASE_YEAR
+#define CONFIG_SYS_M41T11_BASE_YEAR 2000
 #endif
 
 #else
@@ -101,7 +101,7 @@ int rtc_get (struct rtc_time *tmp)
 	int rel = 0;
 	uchar data[RTC_REG_CNT];
 
-	i2c_read(CFG_I2C_RTC_ADDR, RTC_SEC_ADDR, 1, data, RTC_REG_CNT);
+	i2c_read(CONFIG_SYS_I2C_RTC_ADDR, RTC_SEC_ADDR, 1, data, RTC_REG_CNT);
 
 	if( data[RTC_SEC_ADDR] & 0x80 ){
 		printf( "m41t11 RTC Clock stopped!!!\n" );
@@ -112,14 +112,14 @@ int rtc_get (struct rtc_time *tmp)
 	tmp->tm_hour = bcd2bin (data[RTC_HOUR_ADDR] & 0x3F);
 	tmp->tm_mday = bcd2bin (data[RTC_DATE_ADDR] & 0x3F);
 	tmp->tm_mon  = bcd2bin (data[RTC_MONTH_ADDR]& 0x1F);
-#ifndef CFG_M41T11_EXT_CENTURY_DATA
-	tmp->tm_year = CFG_M41T11_BASE_YEAR
+#ifndef CONFIG_SYS_M41T11_EXT_CENTURY_DATA
+	tmp->tm_year = CONFIG_SYS_M41T11_BASE_YEAR
 		+ bcd2bin(data[RTC_YEARS_ADDR])
 		+ ((data[RTC_HOUR_ADDR]&0x40) ? 100 : 0);
 #else
 	{
 		unsigned char cent;
-		i2c_read(CFG_I2C_RTC_ADDR, M41T11_YEAR_DATA, 1, &cent, M41T11_YEAR_SIZE);
+		i2c_read(CONFIG_SYS_I2C_RTC_ADDR, M41T11_YEAR_DATA, 1, &cent, M41T11_YEAR_SIZE);
 		if( !(data[RTC_HOUR_ADDR] & 0x80) ){
 			printf( "m41t11 RTC: cann't keep track of years without CEB set\n" );
 			rel = -1;
@@ -127,7 +127,7 @@ int rtc_get (struct rtc_time *tmp)
 		if( (cent & 0x1) != ((data[RTC_HOUR_ADDR]&0x40)>>7) ){
 			/*century flip store off new year*/
 			cent += 1;
-			i2c_write(CFG_I2C_RTC_ADDR, M41T11_YEAR_DATA, 1, &cent, M41T11_YEAR_SIZE);
+			i2c_write(CONFIG_SYS_I2C_RTC_ADDR, M41T11_YEAR_DATA, 1, &cent, M41T11_YEAR_SIZE);
 		}
 		tmp->tm_year =((int)cent*100)+bcd2bin(data[RTC_YEARS_ADDR]);
 	}
@@ -143,7 +143,7 @@ int rtc_get (struct rtc_time *tmp)
 	return rel;
 }
 
-void rtc_set (struct rtc_time *tmp)
+int rtc_set (struct rtc_time *tmp)
 {
 	uchar data[RTC_REG_CNT];
 
@@ -161,34 +161,36 @@ void rtc_set (struct rtc_time *tmp)
 	data[RTC_HOUR_ADDR]   |= 0x80;/*we will always use CEB*/
 
 	data[RTC_YEARS_ADDR]  = bin2bcd(tmp->tm_year%100);/*same thing either way*/
-#ifndef CFG_M41T11_EXT_CENTURY_DATA
-	if( ((tmp->tm_year - CFG_M41T11_BASE_YEAR) > 200) ||
-	    (tmp->tm_year < CFG_M41T11_BASE_YEAR) ){
+#ifndef CONFIG_SYS_M41T11_EXT_CENTURY_DATA
+	if( ((tmp->tm_year - CONFIG_SYS_M41T11_BASE_YEAR) > 200) ||
+	    (tmp->tm_year < CONFIG_SYS_M41T11_BASE_YEAR) ){
 		printf( "m41t11 RTC setting year out of range!!need recompile\n" );
 	}
-	data[RTC_HOUR_ADDR] |= (tmp->tm_year - CFG_M41T11_BASE_YEAR) > 100 ? 0x40 : 0;
+	data[RTC_HOUR_ADDR] |= (tmp->tm_year - CONFIG_SYS_M41T11_BASE_YEAR) > 100 ? 0x40 : 0;
 #else
 	{
 		unsigned char cent;
 		cent = tmp->tm_year ? tmp->tm_year / 100 : 0;
 		data[RTC_HOUR_ADDR] |= (cent & 0x1) ? 0x40 : 0;
-		i2c_write(CFG_I2C_RTC_ADDR, M41T11_YEAR_DATA, 1, &cent, M41T11_YEAR_SIZE);
+		i2c_write(CONFIG_SYS_I2C_RTC_ADDR, M41T11_YEAR_DATA, 1, &cent, M41T11_YEAR_SIZE);
 	}
 #endif
-	i2c_write(CFG_I2C_RTC_ADDR, RTC_SEC_ADDR, 1, data, RTC_REG_CNT);
+	i2c_write(CONFIG_SYS_I2C_RTC_ADDR, RTC_SEC_ADDR, 1, data, RTC_REG_CNT);
+
+	return 0;
 }
 
 void rtc_reset (void)
 {
 	unsigned char val;
 	/* clear all control & status registers */
-	i2c_read(CFG_I2C_RTC_ADDR, RTC_SEC_ADDR, 1, &val, 1);
+	i2c_read(CONFIG_SYS_I2C_RTC_ADDR, RTC_SEC_ADDR, 1, &val, 1);
 	val = val & 0x7F;/*make sure we are running*/
-	i2c_write(CFG_I2C_RTC_ADDR, RTC_SEC_ADDR, 1, &val, RTC_REG_CNT);
+	i2c_write(CONFIG_SYS_I2C_RTC_ADDR, RTC_SEC_ADDR, 1, &val, RTC_REG_CNT);
 
-	i2c_read(CFG_I2C_RTC_ADDR, RTC_CONTROL_ADDR, 1, &val, 1);
+	i2c_read(CONFIG_SYS_I2C_RTC_ADDR, RTC_CONTROL_ADDR, 1, &val, 1);
 	val = val & 0x3F;/*turn off freq test keep calibration*/
-	i2c_write(CFG_I2C_RTC_ADDR, RTC_CONTROL_ADDR, 1, &val, 1);
+	i2c_write(CONFIG_SYS_I2C_RTC_ADDR, RTC_CONTROL_ADDR, 1, &val, 1);
 }
 
 int rtc_store(int addr, unsigned char* data, int size)
@@ -196,12 +198,12 @@ int rtc_store(int addr, unsigned char* data, int size)
 	/*don't let things wrap onto the time on a write*/
 	if( (addr+size) >= M41T11_STORAGE_SZ )
 		return 1;
-	return i2c_write( CFG_I2C_RTC_ADDR, REG_CNT+addr, 1, data, size );
+	return i2c_write( CONFIG_SYS_I2C_RTC_ADDR, REG_CNT+addr, 1, data, size );
 }
 
 int rtc_recall(int addr, unsigned char* data, int size)
 {
-	return i2c_read( CFG_I2C_RTC_ADDR, REG_CNT+addr, 1, data, size );
+	return i2c_read( CONFIG_SYS_I2C_RTC_ADDR, REG_CNT+addr, 1, data, size );
 }
 
 #endif
diff --git a/drivers/rtc/m41t60.c b/drivers/rtc/m41t60.c
index 402a8c829..e34a5f478 100644
--- a/drivers/rtc/m41t60.c
+++ b/drivers/rtc/m41t60.c
@@ -34,7 +34,7 @@
 #include <rtc.h>
 #include <i2c.h>
 
-#if defined(CFG_I2C_RTC_ADDR) && defined(CONFIG_CMD_DATE)
+#if defined(CONFIG_SYS_I2C_RTC_ADDR) && defined(CONFIG_CMD_DATE)
 
 static unsigned bcd2bin(uchar n)
 {
@@ -85,7 +85,7 @@ static void rtc_dump(char const *const label)
 {
 	uchar data[8];
 
-	if (i2c_read(CFG_I2C_RTC_ADDR, 0, 1, data, sizeof(data))) {
+	if (i2c_read(CONFIG_SYS_I2C_RTC_ADDR, 0, 1, data, sizeof(data))) {
 		printf("I2C read failed in rtc_dump()\n");
 		return;
 	}
@@ -114,7 +114,7 @@ static uchar *rtc_validate(void)
 	uchar min, date, month, years;
 
 	rtc_dump("begin validate");
-	if (i2c_read(CFG_I2C_RTC_ADDR, 0, 1, data, sizeof(data))) {
+	if (i2c_read(CONFIG_SYS_I2C_RTC_ADDR, 0, 1, data, sizeof(data))) {
 		printf("I2C read failed in rtc_validate()\n");
 		return 0;
 	}
@@ -125,7 +125,7 @@ static uchar *rtc_validate(void)
 	if (0x00 != (data[RTC_CTRL] & 0x80)) {
 		printf("M41T60 RTC clock lost power.\n");
 		data[RTC_SEC] = 0x80;
-		if (i2c_write(CFG_I2C_RTC_ADDR, RTC_SEC, 1, data, 1)) {
+		if (i2c_write(CONFIG_SYS_I2C_RTC_ADDR, RTC_SEC, 1, data, 1)) {
 			printf("I2C write failed in rtc_validate()\n");
 			return 0;
 		}
@@ -161,7 +161,7 @@ static uchar *rtc_validate(void)
 		data[RTC_YEAR] = 0x00;
 		data[RTC_CTRL] &= 0x7F;	/* reset OUT bit */
 
-		if (i2c_write(CFG_I2C_RTC_ADDR, 0, 1, data, sizeof(data))) {
+		if (i2c_write(CONFIG_SYS_I2C_RTC_ADDR, 0, 1, data, sizeof(data))) {
 			printf("I2C write failed in rtc_validate()\n");
 			return 0;
 		}
@@ -193,12 +193,12 @@ int rtc_get(struct rtc_time *tmp)
 	return 0;
 }
 
-void rtc_set(struct rtc_time *tmp)
+int rtc_set(struct rtc_time *tmp)
 {
 	uchar *const data = rtc_validate();
 
 	if (!data)
-		return;
+		return -1;
 
 	debug("Set DATE: %4d-%02d-%02d (wday=%d)  TIME: %2d:%02d:%02d\n",
 	      tmp->tm_year, tmp->tm_mon, tmp->tm_mday, tmp->tm_wday,
@@ -212,10 +212,12 @@ void rtc_set(struct rtc_time *tmp)
 	data[RTC_YEAR] = bin2bcd(tmp->tm_year % 100);
 	data[RTC_MONTH] |= year2cb(tmp->tm_year) << 6;
 	data[RTC_DAY] = bin2bcd(tmp->tm_wday + 1) & 0x07;
-	if (i2c_write(CFG_I2C_RTC_ADDR, 0, 1, data, RTC_REG_CNT)) {
+	if (i2c_write(CONFIG_SYS_I2C_RTC_ADDR, 0, 1, data, RTC_REG_CNT)) {
 		printf("I2C write failed in rtc_set()\n");
-		return;
+		return -1;
 	}
+
+	return 0;
 }
 
 void rtc_reset(void)
@@ -253,10 +255,10 @@ void rtc_reset(void)
 	 * Turn off frequency test.
 	 */
 	data[RTC_CTRL] &= 0xBF;
-	if (i2c_write(CFG_I2C_RTC_ADDR, RTC_CTRL, 1, data + RTC_CTRL, 1)) {
+	if (i2c_write(CONFIG_SYS_I2C_RTC_ADDR, RTC_CTRL, 1, data + RTC_CTRL, 1)) {
 		printf("I2C write failed in rtc_reset()\n");
 		return;
 	}
 	rtc_dump("end reset");
 }
-#endif /* CONFIG_RTC_M41T60 && CFG_I2C_RTC_ADDR && CONFIG_CMD_DATE */
+#endif /* CONFIG_RTC_M41T60 && CONFIG_SYS_I2C_RTC_ADDR && CONFIG_CMD_DATE */
diff --git a/drivers/rtc/m41t62.c b/drivers/rtc/m41t62.c
index 89d4ccdb2..cfe84f926 100644
--- a/drivers/rtc/m41t62.c
+++ b/drivers/rtc/m41t62.c
@@ -68,7 +68,7 @@ int rtc_get(struct rtc_time *tm)
 {
 	u8 buf[M41T62_DATETIME_REG_SIZE];
 
-	i2c_read(CFG_I2C_RTC_ADDR, 0, 1, buf, M41T62_DATETIME_REG_SIZE);
+	i2c_read(CONFIG_SYS_I2C_RTC_ADDR, 0, 1, buf, M41T62_DATETIME_REG_SIZE);
 
 	debug("%s: raw read data - sec=%02x, min=%02x, hr=%02x, "
 	      "mday=%02x, mon=%02x, year=%02x, wday=%02x, y2k=%02x\n",
@@ -96,7 +96,7 @@ int rtc_get(struct rtc_time *tm)
 	return 0;
 }
 
-void rtc_set(struct rtc_time *tm)
+int rtc_set(struct rtc_time *tm)
 {
 	u8 buf[M41T62_DATETIME_REG_SIZE];
 
@@ -104,7 +104,7 @@ void rtc_set(struct rtc_time *tm)
 	      tm->tm_year, tm->tm_mon, tm->tm_mday, tm->tm_wday,
 	      tm->tm_hour, tm->tm_min, tm->tm_sec);
 
-	i2c_read(CFG_I2C_RTC_ADDR, 0, 1, buf, M41T62_DATETIME_REG_SIZE);
+	i2c_read(CONFIG_SYS_I2C_RTC_ADDR, 0, 1, buf, M41T62_DATETIME_REG_SIZE);
 
 	/* Merge time-data and register flags into buf[0..7] */
 	buf[M41T62_REG_SSEC] = 0;
@@ -123,8 +123,12 @@ void rtc_set(struct rtc_time *tm)
 	/* assume 20YY not 19YY */
 	buf[M41T62_REG_YEAR] = BIN2BCD(tm->tm_year % 100);
 
-	if (i2c_write(CFG_I2C_RTC_ADDR, 0, 1, buf, M41T62_DATETIME_REG_SIZE))
+	if (i2c_write(CONFIG_SYS_I2C_RTC_ADDR, 0, 1, buf, M41T62_DATETIME_REG_SIZE)) {
 		printf("I2C write failed in %s()\n", __func__);
+		return -1;
+	}
+
+	return 0;
 }
 
 void rtc_reset(void)
diff --git a/drivers/rtc/m48t35ax.c b/drivers/rtc/m48t35ax.c
index 353a30e1f..1482edd60 100644
--- a/drivers/rtc/m48t35ax.c
+++ b/drivers/rtc/m48t35ax.c
@@ -87,7 +87,7 @@ int rtc_get (struct rtc_time *tmp)
 	return 0;
 }
 
-void rtc_set (struct rtc_time *tmp)
+int rtc_set (struct rtc_time *tmp)
 {
 	uchar ccr;			/* Clock control register */
 	uchar century;
@@ -116,6 +116,8 @@ void rtc_set (struct rtc_time *tmp)
 	ccr = rtc_read(0);
 	ccr = ccr & 0x7F;
 	rtc_write(0, ccr);
+
+	return 0;
 }
 
 void rtc_reset (void)
@@ -145,14 +147,14 @@ static uchar rtc_read (uchar reg)
 {
 	uchar val;
 	val = *(unsigned char *)
-		((CFG_NVRAM_BASE_ADDR + CFG_NVRAM_SIZE - 8) + reg);
+		((CONFIG_SYS_NVRAM_BASE_ADDR + CONFIG_SYS_NVRAM_SIZE - 8) + reg);
 	return val;
 }
 
 static void rtc_write (uchar reg, uchar val)
 {
 	*(unsigned char *)
-		((CFG_NVRAM_BASE_ADDR + CFG_NVRAM_SIZE - 8) + reg) = val;
+		((CONFIG_SYS_NVRAM_BASE_ADDR + CONFIG_SYS_NVRAM_SIZE - 8) + reg) = val;
 }
 
 static unsigned bcd2bin (uchar n)
diff --git a/drivers/rtc/max6900.c b/drivers/rtc/max6900.c
index 4cfc5de3d..7c99c5e5b 100644
--- a/drivers/rtc/max6900.c
+++ b/drivers/rtc/max6900.c
@@ -34,20 +34,20 @@
 
 #if defined(CONFIG_CMD_DATE)
 
-#ifndef	CFG_I2C_RTC_ADDR
-#define	CFG_I2C_RTC_ADDR	0x50
+#ifndef	CONFIG_SYS_I2C_RTC_ADDR
+#define	CONFIG_SYS_I2C_RTC_ADDR	0x50
 #endif
 
 /* ------------------------------------------------------------------------- */
 
 static uchar rtc_read (uchar reg)
 {
-	return (i2c_reg_read (CFG_I2C_RTC_ADDR, reg));
+	return (i2c_reg_read (CONFIG_SYS_I2C_RTC_ADDR, reg));
 }
 
 static void rtc_write (uchar reg, uchar val)
 {
-	i2c_reg_write (CFG_I2C_RTC_ADDR, reg, val);
+	i2c_reg_write (CONFIG_SYS_I2C_RTC_ADDR, reg, val);
 	udelay(2500);
 }
 
@@ -107,7 +107,7 @@ int rtc_get (struct rtc_time *tmp)
 	return 0;
 }
 
-void rtc_set (struct rtc_time *tmp)
+int rtc_set (struct rtc_time *tmp)
 {
 
 	debug ( "Set DATE: %4d-%02d-%02d (wday=%d)  TIME: %2d:%02d:%02d\n",
@@ -124,6 +124,8 @@ void rtc_set (struct rtc_time *tmp)
 	rtc_write (0x84, bin2bcd(tmp->tm_hour));
 	rtc_write (0x82, bin2bcd(tmp->tm_min ));
 	rtc_write (0x80, bin2bcd(tmp->tm_sec ));
+
+	return 0;
 }
 
 void rtc_reset (void)
diff --git a/drivers/rtc/mc13783-rtc.c b/drivers/rtc/mc13783-rtc.c
index b6e15014b..05db2f1d4 100644
--- a/drivers/rtc/mc13783-rtc.c
+++ b/drivers/rtc/mc13783-rtc.c
@@ -34,7 +34,8 @@ int rtc_get(struct rtc_time *rtc)
 
 	if (!slave) {
 		/* FIXME: Verify the max SCK rate */
-		slave = spi_setup_slave(1, 0, 1000000,
+		slave = spi_setup_slave(CONFIG_MC13783_SPI_BUS,
+				CONFIG_MC13783_SPI_CS, 1000000,
 				SPI_MODE_2 | SPI_CS_HIGH);
 		if (!slave)
 			return -1;
@@ -77,16 +78,17 @@ int rtc_get(struct rtc_time *rtc)
 	return 0;
 }
 
-void rtc_set(struct rtc_time *rtc)
+int rtc_set(struct rtc_time *rtc)
 {
 	u32 time, day, reg;
 
 	if (!slave) {
 		/* FIXME: Verify the max SCK rate */
-		slave = spi_setup_slave(1, 0, 1000000,
+		slave = spi_setup_slave(CONFIG_MC13783_SPI_BUS,
+				CONFIG_MC13783_SPI_CS, 1000000,
 				SPI_MODE_2 | SPI_CS_HIGH);
 		if (!slave)
-			return;
+			return -1;
 	}
 
 	time = mktime(rtc->tm_year, rtc->tm_mon, rtc->tm_mday,
@@ -95,7 +97,7 @@ void rtc_set(struct rtc_time *rtc)
 	time %= 86400;
 
 	if (spi_claim_bus(slave))
-		return;
+		return -1;
 
 	reg = 0x2c000000 | day | 0x80000000;
 	spi_xfer(slave, 32, (uchar *)&reg, (uchar *)&day,
@@ -106,6 +108,8 @@ void rtc_set(struct rtc_time *rtc)
 			SPI_XFER_BEGIN | SPI_XFER_END);
 
 	spi_release_bus(slave);
+
+	return -1;
 }
 
 void rtc_reset(void)
diff --git a/drivers/rtc/mc146818.c b/drivers/rtc/mc146818.c
index 460a0e6c5..38484ce26 100644
--- a/drivers/rtc/mc146818.c
+++ b/drivers/rtc/mc146818.c
@@ -38,7 +38,7 @@ static void  rtc_write (uchar reg, uchar val);
 static uchar bin2bcd   (unsigned int n);
 static unsigned bcd2bin(uchar c);
 
-#define RTC_PORT_MC146818	CFG_ISA_IO_BASE_ADDRESS +  0x70
+#define RTC_PORT_MC146818	CONFIG_SYS_ISA_IO_BASE_ADDRESS +  0x70
 #define RTC_SECONDS		0x00
 #define RTC_SECONDS_ALARM	0x01
 #define RTC_MINUTES		0x02
@@ -105,7 +105,7 @@ int rtc_get (struct rtc_time *tmp)
 	return 0;
 }
 
-void rtc_set (struct rtc_time *tmp)
+int rtc_set (struct rtc_time *tmp)
 {
 #ifdef RTC_DEBUG
 	printf ( "Set DATE: %4d-%02d-%02d (wday=%d)  TIME: %2d:%02d:%02d\n",
@@ -127,6 +127,7 @@ void rtc_set (struct rtc_time *tmp)
 	rtc_write (RTC_SECONDS, bin2bcd(tmp->tm_sec ));
 	rtc_write(RTC_CONFIG_B,0x02); /* enables the RTC to update the regs */
 
+	return 0;
 }
 
 void rtc_reset (void)
@@ -140,18 +141,18 @@ void rtc_reset (void)
 
 /* ------------------------------------------------------------------------- */
 
-#ifdef CFG_RTC_REG_BASE_ADDR
+#ifdef CONFIG_SYS_RTC_REG_BASE_ADDR
 /*
  * use direct memory access
  */
 static uchar rtc_read (uchar reg)
 {
-	return(in8(CFG_RTC_REG_BASE_ADDR+reg));
+	return(in8(CONFIG_SYS_RTC_REG_BASE_ADDR+reg));
 }
 
 static void rtc_write (uchar reg, uchar val)
 {
-	out8(CFG_RTC_REG_BASE_ADDR+reg, val);
+	out8(CONFIG_SYS_RTC_REG_BASE_ADDR+reg, val);
 }
 #else
 static uchar rtc_read (uchar reg)
diff --git a/drivers/rtc/mcfrtc.c b/drivers/rtc/mcfrtc.c
index 30b2a8198..979c46651 100644
--- a/drivers/rtc/mcfrtc.c
+++ b/drivers/rtc/mcfrtc.c
@@ -32,7 +32,7 @@
 
 #undef RTC_DEBUG
 
-#ifndef CFG_MCFRTC_BASE
+#ifndef CONFIG_SYS_MCFRTC_BASE
 #error RTC_BASE is not defined!
 #endif
 
@@ -41,7 +41,7 @@
 
 int rtc_get(struct rtc_time *tmp)
 {
-	volatile rtc_t *rtc = (rtc_t *) (CFG_MCFRTC_BASE);
+	volatile rtc_t *rtc = (rtc_t *) (CONFIG_SYS_MCFRTC_BASE);
 
 	int rtc_days, rtc_hrs, rtc_mins;
 	int tim;
@@ -68,9 +68,9 @@ int rtc_get(struct rtc_time *tmp)
 	return 0;
 }
 
-void rtc_set(struct rtc_time *tmp)
+int rtc_set(struct rtc_time *tmp)
 {
-	volatile rtc_t *rtc = (rtc_t *) (CFG_MCFRTC_BASE);
+	volatile rtc_t *rtc = (rtc_t *) (CONFIG_SYS_MCFRTC_BASE);
 
 	static int month_days[12] = {
 		31, 28, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31
@@ -106,11 +106,13 @@ void rtc_set(struct rtc_time *tmp)
 	rtc->days = days;
 	rtc->hourmin = (tmp->tm_hour << 8) | tmp->tm_min;
 	rtc->seconds = tmp->tm_sec;
+
+	return 0;
 }
 
 void rtc_reset(void)
 {
-	volatile rtc_t *rtc = (rtc_t *) (CFG_MCFRTC_BASE);
+	volatile rtc_t *rtc = (rtc_t *) (CONFIG_SYS_MCFRTC_BASE);
 
 	if ((rtc->cr & RTC_CR_EN) == 0) {
 		printf("real-time-clock was stopped. Now starting...\n");
diff --git a/drivers/rtc/mk48t59.c b/drivers/rtc/mk48t59.c
index 918c291a0..dabf3222b 100644
--- a/drivers/rtc/mk48t59.c
+++ b/drivers/rtc/mk48t59.c
@@ -185,7 +185,7 @@ int rtc_get (struct rtc_time *tmp)
 	return 0;
 }
 
-void rtc_set (struct rtc_time *tmp)
+int rtc_set (struct rtc_time *tmp)
 {
 	uchar save_ctrl_a;
 
@@ -210,6 +210,8 @@ void rtc_set (struct rtc_time *tmp)
 
 	save_ctrl_a &= ~RTC_CA_WRITE;
 	rtc_write(RTC_CONTROLA, save_ctrl_a); /* enables the RTC to update the regs */
+
+	return 0;
 }
 
 void rtc_reset (void)
diff --git a/drivers/rtc/mpc5xxx.c b/drivers/rtc/mpc5xxx.c
index 145064995..ec0b0ef68 100644
--- a/drivers/rtc/mpc5xxx.c
+++ b/drivers/rtc/mpc5xxx.c
@@ -57,7 +57,7 @@ typedef struct rtc5200 {
  *****************************************************************************/
 int rtc_get (struct rtc_time *tmp)
 {
-	RTC5200	*rtc = (RTC5200 *) (CFG_MBAR+0x800);
+	RTC5200	*rtc = (RTC5200 *) (CONFIG_SYS_MBAR+0x800);
 	ulong time, date, time2;
 
 	/* read twice to avoid getting a funny time when the second is just changing */
@@ -88,9 +88,9 @@ int rtc_get (struct rtc_time *tmp)
 /*****************************************************************************
  * set time
  *****************************************************************************/
-void rtc_set (struct rtc_time *tmp)
+int rtc_set (struct rtc_time *tmp)
 {
-	RTC5200	*rtc = (RTC5200 *) (CFG_MBAR+0x800);
+	RTC5200	*rtc = (RTC5200 *) (CONFIG_SYS_MBAR+0x800);
 	ulong time, date, year;
 
 	debug ( "Set DATE: %4d-%02d-%02d (wday=%d)  TIME: %2d:%02d:%02d\n",
@@ -129,6 +129,8 @@ void rtc_set (struct rtc_time *tmp)
 	udelay (1000);
 	rtc->tsr = time;
 	udelay (1000);
+
+	return 0;
 }
 
 /*****************************************************************************
diff --git a/drivers/rtc/mpc8xx.c b/drivers/rtc/mpc8xx.c
index 943506975..1c24e59e4 100644
--- a/drivers/rtc/mpc8xx.c
+++ b/drivers/rtc/mpc8xx.c
@@ -37,7 +37,7 @@
 
 int rtc_get (struct rtc_time *tmp)
 {
-	volatile immap_t *immr = (immap_t *)CFG_IMMR;
+	volatile immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
 	ulong tim;
 
 	tim = immr->im_sit.sit_rtc;
@@ -51,9 +51,9 @@ int rtc_get (struct rtc_time *tmp)
 	return 0;
 }
 
-void rtc_set (struct rtc_time *tmp)
+int rtc_set (struct rtc_time *tmp)
 {
-	volatile immap_t *immr = (immap_t *)CFG_IMMR;
+	volatile immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
 	ulong tim;
 
 	debug ( "Set DATE: %4d-%02d-%02d (wday=%d)  TIME: %2d:%02d:%02d\n",
@@ -65,6 +65,8 @@ void rtc_set (struct rtc_time *tmp)
 
 	immr->im_sitk.sitk_rtck = KAPWR_KEY;
 	immr->im_sit.sit_rtc = tim;
+
+	return 0;
 }
 
 void rtc_reset (void)
diff --git a/drivers/rtc/pcf8563.c b/drivers/rtc/pcf8563.c
index 1274ffaf0..cd9fb65c3 100644
--- a/drivers/rtc/pcf8563.c
+++ b/drivers/rtc/pcf8563.c
@@ -86,7 +86,7 @@ int rtc_get (struct rtc_time *tmp)
 	return rel;
 }
 
-void rtc_set (struct rtc_time *tmp)
+int rtc_set (struct rtc_time *tmp)
 {
 	uchar century;
 
@@ -104,6 +104,8 @@ void rtc_set (struct rtc_time *tmp)
 	rtc_write (0x04, bin2bcd(tmp->tm_hour));
 	rtc_write (0x03, bin2bcd(tmp->tm_min ));
 	rtc_write (0x02, bin2bcd(tmp->tm_sec ));
+
+	return 0;
 }
 
 void rtc_reset (void)
@@ -127,12 +129,12 @@ void rtc_reset (void)
 
 static uchar rtc_read (uchar reg)
 {
-	return (i2c_reg_read (CFG_I2C_RTC_ADDR, reg));
+	return (i2c_reg_read (CONFIG_SYS_I2C_RTC_ADDR, reg));
 }
 
 static void rtc_write (uchar reg, uchar val)
 {
-	i2c_reg_write (CFG_I2C_RTC_ADDR, reg, val);
+	i2c_reg_write (CONFIG_SYS_I2C_RTC_ADDR, reg, val);
 }
 
 static unsigned bcd2bin (uchar n)
diff --git a/drivers/rtc/pl031.c b/drivers/rtc/pl031.c
index 276c18421..8b2b174ae 100755..100644
--- a/drivers/rtc/pl031.c
+++ b/drivers/rtc/pl031.c
@@ -29,8 +29,8 @@
 
 #if defined(CONFIG_CMD_DATE)
 
-#ifndef CFG_RTC_PL031_BASE
-#error CFG_RTC_PL031_BASE is not defined!
+#ifndef CONFIG_SYS_RTC_PL031_BASE
+#error CONFIG_SYS_RTC_PL031_BASE is not defined!
 #endif
 
 /*
@@ -48,9 +48,9 @@
 #define RTC_CR_START	(1 << 0)
 
 #define	RTC_WRITE_REG(addr, val) \
-			(*(volatile unsigned int *)(CFG_RTC_PL031_BASE + (addr)) = (val))
+			(*(volatile unsigned int *)(CONFIG_SYS_RTC_PL031_BASE + (addr)) = (val))
 #define	RTC_READ_REG(addr)	\
-			(*(volatile unsigned int *)(CFG_RTC_PL031_BASE + (addr)))
+			(*(volatile unsigned int *)(CONFIG_SYS_RTC_PL031_BASE + (addr)))
 
 static int pl031_initted = 0;
 
@@ -75,7 +75,7 @@ void rtc_reset(void)
 /*
  * Set the RTC
 */
-void rtc_set(struct rtc_time *tmp)
+int rtc_set(struct rtc_time *tmp)
 {
 	unsigned long tim;
 
@@ -84,7 +84,7 @@ void rtc_set(struct rtc_time *tmp)
 
 	if (tmp == NULL) {
 		puts("Error setting the date/time\n");
-		return;
+		return -1;
 	}
 
 	/* Calculate number of seconds this incoming time represents */
@@ -92,6 +92,8 @@ void rtc_set(struct rtc_time *tmp)
 	                tmp->tm_hour, tmp->tm_min, tmp->tm_sec);
 
 	RTC_WRITE_REG(RTC_LR, tim);
+
+	return -1;
 }
 
 /*
diff --git a/drivers/rtc/rs5c372.c b/drivers/rtc/rs5c372.c
index 38db19929..d6cd7c825 100644
--- a/drivers/rtc/rs5c372.c
+++ b/drivers/rtc/rs5c372.c
@@ -50,8 +50,8 @@ static unsigned int rtc_debug = DEBUG;
 #define rtc_debug 0	/* gcc will remove all the debug code for us */
 #endif
 
-#ifndef CFG_I2C_RTC_ADDR
-#define CFG_I2C_RTC_ADDR 0x32
+#ifndef CONFIG_SYS_I2C_RTC_ADDR
+#define CONFIG_SYS_I2C_RTC_ADDR 0x32
 #endif
 
 #define RS5C372_RAM_SIZE 0x10
@@ -77,7 +77,7 @@ rs5c372_readram(unsigned char *buf, int len)
 {
 	int ret;
 
-	ret = i2c_read(CFG_I2C_RTC_ADDR, 0, 0, buf, len);
+	ret = i2c_read(CONFIG_SYS_I2C_RTC_ADDR, 0, 0, buf, len);
 	if (ret != 0) {
 		printf("%s: failed to read\n", __FUNCTION__);
 		return ret;
@@ -117,7 +117,7 @@ rs5c372_enable(void)
 	buf[14] = 0; /* reg. 13 */
 	buf[15] = 0; /* reg. 14 */
 	buf[16] = USE_24HOUR_MODE; /* reg. 15 */
-	ret = i2c_write(CFG_I2C_RTC_ADDR, 0, 0, buf, RS5C372_RAM_SIZE+1);
+	ret = i2c_write(CONFIG_SYS_I2C_RTC_ADDR, 0, 0, buf, RS5C372_RAM_SIZE+1);
 	if (ret != 0) {
 		printf("%s: failed\n", __FUNCTION__);
 		return;
@@ -195,8 +195,7 @@ rtc_get (struct rtc_time *tmp)
 /*
  * Set the RTC
  */
-void
-rtc_set (struct rtc_time *tmp)
+int rtc_set (struct rtc_time *tmp)
 {
 	unsigned char buf[8], reg15;
 	int ret;
@@ -205,7 +204,7 @@ rtc_set (struct rtc_time *tmp)
 		rs5c372_enable();
 
 	if (!setup_done)
-		return;
+		return -1;
 
 	if(rtc_debug > 2) {
 		printf("rtc_set: tm_year = %d\n", tmp->tm_year);
@@ -219,7 +218,7 @@ rtc_set (struct rtc_time *tmp)
 	memset(buf, 0, sizeof(buf));
 
 	/* only read register 15 */
-	ret = i2c_read(CFG_I2C_RTC_ADDR, 0, 0, buf, 1);
+	ret = i2c_read(CONFIG_SYS_I2C_RTC_ADDR, 0, 0, buf, 1);
 
 	if (ret == 0) {
 		/* need to save register 15 */
@@ -248,12 +247,16 @@ rtc_set (struct rtc_time *tmp)
 			printf("WARNING: year should be between 1970 and 2069!\n");
 		buf[7] = bin2bcd(tmp->tm_year % 100);
 
-		ret = i2c_write(CFG_I2C_RTC_ADDR, 0, 0, buf, 8);
-		if (ret != 0)
+		ret = i2c_write(CONFIG_SYS_I2C_RTC_ADDR, 0, 0, buf, 8);
+		if (ret != 0) {
 			printf("rs5c372_set_datetime(), i2c_master_send() returned %d\n",ret);
+			return -1;
+		}
+	} else {
+		return -1;
 	}
 
-	return;
+	return 0;
 }
 
 /*
diff --git a/drivers/rtc/rx8025.c b/drivers/rtc/rx8025.c
index 064138e9e..da87394a0 100644
--- a/drivers/rtc/rx8025.c
+++ b/drivers/rtc/rx8025.c
@@ -42,8 +42,8 @@
 #endif
 /*---------------------------------------------------------------------*/
 
-#ifndef CFG_I2C_RTC_ADDR
-# define CFG_I2C_RTC_ADDR	0x32
+#ifndef CONFIG_SYS_I2C_RTC_ADDR
+# define CONFIG_SYS_I2C_RTC_ADDR	0x32
 #endif
 
 /*
@@ -102,7 +102,7 @@ int rtc_get (struct rtc_time *tmp)
 	uchar sec, min, hour, mday, wday, mon, year, ctl2;
 	uchar buf[16];
 
-	if (i2c_read(CFG_I2C_RTC_ADDR, 0, 0, buf, 16))
+	if (i2c_read(CONFIG_SYS_I2C_RTC_ADDR, 0, 0, buf, 16))
 		printf("Error reading from RTC\n");
 
 	sec = rtc_read(RTC_SEC_REG_ADDR);
@@ -136,7 +136,11 @@ int rtc_get (struct rtc_time *tmp)
 
 	tmp->tm_sec  = bcd2bin (sec & 0x7F);
 	tmp->tm_min  = bcd2bin (min & 0x7F);
-	tmp->tm_hour = bcd2bin (hour & 0x3F);
+	if (rtc_read(RTC_CTL1_REG_ADDR) & RTC_CTL1_BIT_2412)
+		tmp->tm_hour = bcd2bin (hour & 0x3F);
+	else
+		tmp->tm_hour = bcd2bin (hour & 0x1F) % 12 +
+			       ((hour & 0x20) ? 12 : 0);
 	tmp->tm_mday = bcd2bin (mday & 0x3F);
 	tmp->tm_mon  = bcd2bin (mon & 0x1F);
 	tmp->tm_year = bcd2bin (year) + ( bcd2bin (year) >= 70 ? 1900 : 2000);
@@ -154,7 +158,7 @@ int rtc_get (struct rtc_time *tmp)
 /*
  * Set the RTC
  */
-void rtc_set (struct rtc_time *tmp)
+int rtc_set (struct rtc_time *tmp)
 {
 	DEBUGR ("Set DATE: %4d-%02d-%02d (wday=%d)  TIME: %2d:%02d:%02d\n",
 		tmp->tm_year, tmp->tm_mon, tmp->tm_mday, tmp->tm_wday,
@@ -172,6 +176,8 @@ void rtc_set (struct rtc_time *tmp)
 	rtc_write (RTC_SEC_REG_ADDR, bin2bcd (tmp->tm_sec));
 
 	rtc_write (RTC_CTL1_REG_ADDR, RTC_CTL1_BIT_2412);
+
+	return 0;
 }
 
 /*
@@ -183,7 +189,7 @@ void rtc_reset (void)
 	uchar buf[16];
 	uchar ctl2;
 
-	if (i2c_read(CFG_I2C_RTC_ADDR, 0,    0,   buf, 16))
+	if (i2c_read(CONFIG_SYS_I2C_RTC_ADDR, 0,    0,   buf, 16))
 		printf("Error reading from RTC\n");
 
 	ctl2 = rtc_read(RTC_CTL2_REG_ADDR);
@@ -215,7 +221,7 @@ static void rtc_write (uchar reg, uchar val)
 	uchar buf[2];
 	buf[0] = reg << 4;
 	buf[1] = val;
-	if (i2c_write(CFG_I2C_RTC_ADDR, 0, 0, buf, 2) != 0)
+	if (i2c_write(CONFIG_SYS_I2C_RTC_ADDR, 0, 0, buf, 2) != 0)
 		printf("Error writing to RTC\n");
 
 }
diff --git a/drivers/rtc/s3c24x0_rtc.c b/drivers/rtc/s3c24x0_rtc.c
index 13d077b64..0d3372fac 100644
--- a/drivers/rtc/s3c24x0_rtc.c
+++ b/drivers/rtc/s3c24x0_rtc.c
@@ -135,7 +135,7 @@ int rtc_get (struct rtc_time *tmp)
 	return 0;
 }
 
-void rtc_set (struct rtc_time *tmp)
+int rtc_set (struct rtc_time *tmp)
 {
 	S3C24X0_RTC * const rtc = S3C24X0_GetBase_RTC();
 	uchar sec, min, hour, mday, wday, mon, year;
@@ -167,6 +167,8 @@ void rtc_set (struct rtc_time *tmp)
 
 	/* disable access to RTC registers */
 	SetRTC_Access(RTC_DISABLE);
+
+	return 0;
 }
 
 void rtc_reset (void)
diff --git a/drivers/rtc/x1205.c b/drivers/rtc/x1205.c
index 7025cf463..56115b032 100644
--- a/drivers/rtc/x1205.c
+++ b/drivers/rtc/x1205.c
@@ -96,7 +96,7 @@
 
 static void rtc_write(int reg, u8 val)
 {
-	i2c_write(CFG_I2C_RTC_ADDR, reg, 2, &val, 1);
+	i2c_write(CONFIG_SYS_I2C_RTC_ADDR, reg, 2, &val, 1);
 }
 
 /*
@@ -108,7 +108,7 @@ int rtc_get(struct rtc_time *tm)
 {
 	u8 buf[8];
 
-	i2c_read(CFG_I2C_RTC_ADDR, X1205_CCR_BASE, 2, buf, 8);
+	i2c_read(CONFIG_SYS_I2C_RTC_ADDR, X1205_CCR_BASE, 2, buf, 8);
 
 	debug("%s: raw read data - sec=%02x, min=%02x, hr=%02x, "
 	      "mday=%02x, mon=%02x, year=%02x, wday=%02x, y2k=%02x\n",
@@ -134,7 +134,7 @@ int rtc_get(struct rtc_time *tm)
 	return 0;
 }
 
-void rtc_set(struct rtc_time *tm)
+int rtc_set(struct rtc_time *tm)
 {
 	int i;
 	u8 buf[8];
@@ -168,6 +168,8 @@ void rtc_set(struct rtc_time *tm)
 		rtc_write(X1205_CCR_BASE + i, buf[i]);
 
 	rtc_write(X1205_REG_SR, 0);
+
+	return 0;
 }
 
 void rtc_reset(void)
diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile
index f30014d32..17235ff17 100644
--- a/drivers/serial/Makefile
+++ b/drivers/serial/Makefile
@@ -33,13 +33,14 @@ COBJS-$(CONFIG_DRIVER_S3C4510_UART) += s3c4510b_uart.o
 COBJS-$(CONFIG_S3C64XX) += s3c64xx.o
 COBJS-y += serial.o
 COBJS-$(CONFIG_MAX3100_SERIAL) += serial_max3100.o
-COBJS-y += serial_pl010.o
-COBJS-y += serial_pl011.o
+COBJS-$(CONFIG_PL010_SERIAL) += serial_pl01x.o
+COBJS-$(CONFIG_PL011_SERIAL) += serial_pl01x.o
 COBJS-$(CONFIG_XILINX_UARTLITE) += serial_xuartlite.o
 COBJS-$(CONFIG_SCIF_CONSOLE) += serial_sh.o
 COBJS-$(CONFIG_USB_TTY) += usbtty.o
+COBJS-$(CONFIG_VCTH_SERIAL) += vcth.o
 
-COBJS	:= $(COBJS-y)
+COBJS	:= $(sort $(COBJS-y))
 SRCS	:= $(COBJS:.o=.c)
 OBJS	:= $(addprefix $(obj),$(COBJS))
 
diff --git a/drivers/serial/mcfuart.c b/drivers/serial/mcfuart.c
index a1fcd057a..e04fc298d 100644
--- a/drivers/serial/mcfuart.c
+++ b/drivers/serial/mcfuart.c
@@ -41,7 +41,7 @@ int serial_init(void)
 	volatile uart_t *uart;
 	u32 counter;
 
-	uart = (volatile uart_t *)(CFG_UART_BASE);
+	uart = (volatile uart_t *)(CONFIG_SYS_UART_BASE);
 
 	uart_port_conf();
 
@@ -76,7 +76,7 @@ int serial_init(void)
 
 void serial_putc(const char c)
 {
-	volatile uart_t *uart = (volatile uart_t *)(CFG_UART_BASE);
+	volatile uart_t *uart = (volatile uart_t *)(CONFIG_SYS_UART_BASE);
 
 	if (c == '\n')
 		serial_putc('\r');
@@ -96,7 +96,7 @@ void serial_puts(const char *s)
 
 int serial_getc(void)
 {
-	volatile uart_t *uart = (volatile uart_t *)(CFG_UART_BASE);
+	volatile uart_t *uart = (volatile uart_t *)(CONFIG_SYS_UART_BASE);
 
 	/* Wait for a character to arrive. */
 	while (!(uart->usr & UART_USR_RXRDY)) ;
@@ -105,14 +105,14 @@ int serial_getc(void)
 
 int serial_tstc(void)
 {
-	volatile uart_t *uart = (volatile uart_t *)(CFG_UART_BASE);
+	volatile uart_t *uart = (volatile uart_t *)(CONFIG_SYS_UART_BASE);
 
 	return (uart->usr & UART_USR_RXRDY);
 }
 
 void serial_setbrg(void)
 {
-	volatile uart_t *uart = (volatile uart_t *)(CFG_UART_BASE);
+	volatile uart_t *uart = (volatile uart_t *)(CONFIG_SYS_UART_BASE);
 	u32 counter;
 
 	counter = ((gd->bus_clk / gd->baudrate)) >> 5;
diff --git a/drivers/serial/ns16550.c b/drivers/serial/ns16550.c
index 6b3f60eb5..93c2243d7 100644
--- a/drivers/serial/ns16550.c
+++ b/drivers/serial/ns16550.c
@@ -1,12 +1,12 @@
 /*
  * COM1 NS16550 support
  * originally from linux source (arch/ppc/boot/ns16550.c)
- * modified to use CFG_ISA_MEM and new defines
+ * modified to use CONFIG_SYS_ISA_MEM and new defines
  */
 
 #include <config.h>
 
-#ifdef CFG_NS16550
+#ifdef CONFIG_SYS_NS16550
 
 #include <ns16550.h>
 
diff --git a/drivers/serial/serial.c b/drivers/serial/serial.c
index b361eef9a..bce75489d 100644
--- a/drivers/serial/serial.c
+++ b/drivers/serial/serial.c
@@ -23,7 +23,7 @@
 
 #include <common.h>
 
-#ifdef CFG_NS16550_SERIAL
+#ifdef CONFIG_SYS_NS16550_SERIAL
 
 #include <ns16550.h>
 #ifdef CONFIG_NS87308
@@ -48,13 +48,13 @@ DECLARE_GLOBAL_DATA_PTR;
 #error	"Invalid console index value."
 #endif
 
-#if CONFIG_CONS_INDEX == 1 && !defined(CFG_NS16550_COM1)
+#if CONFIG_CONS_INDEX == 1 && !defined(CONFIG_SYS_NS16550_COM1)
 #error	"Console port 1 defined but not configured."
-#elif CONFIG_CONS_INDEX == 2 && !defined(CFG_NS16550_COM2)
+#elif CONFIG_CONS_INDEX == 2 && !defined(CONFIG_SYS_NS16550_COM2)
 #error	"Console port 2 defined but not configured."
-#elif CONFIG_CONS_INDEX == 3 && !defined(CFG_NS16550_COM3)
+#elif CONFIG_CONS_INDEX == 3 && !defined(CONFIG_SYS_NS16550_COM3)
 #error	"Console port 3 defined but not configured."
-#elif CONFIG_CONS_INDEX == 4 && !defined(CFG_NS16550_COM4)
+#elif CONFIG_CONS_INDEX == 4 && !defined(CONFIG_SYS_NS16550_COM4)
 #error	"Console port 4 defined but not configured."
 #endif
 
@@ -62,23 +62,23 @@ DECLARE_GLOBAL_DATA_PTR;
  *	 the array is 0 based.
  */
 static NS16550_t serial_ports[4] = {
-#ifdef CFG_NS16550_COM1
-	(NS16550_t)CFG_NS16550_COM1,
+#ifdef CONFIG_SYS_NS16550_COM1
+	(NS16550_t)CONFIG_SYS_NS16550_COM1,
 #else
 	NULL,
 #endif
-#ifdef CFG_NS16550_COM2
-	(NS16550_t)CFG_NS16550_COM2,
+#ifdef CONFIG_SYS_NS16550_COM2
+	(NS16550_t)CONFIG_SYS_NS16550_COM2,
 #else
 	NULL,
 #endif
-#ifdef CFG_NS16550_COM3
-	(NS16550_t)CFG_NS16550_COM3,
+#ifdef CONFIG_SYS_NS16550_COM3
+	(NS16550_t)CONFIG_SYS_NS16550_COM3,
 #else
 	NULL,
 #endif
-#ifdef CFG_NS16550_COM4
-	(NS16550_t)CFG_NS16550_COM4
+#ifdef CONFIG_SYS_NS16550_COM4
+	(NS16550_t)CONFIG_SYS_NS16550_COM4
 #else
 	NULL
 #endif
@@ -126,7 +126,7 @@ static int calc_divisor (NS16550_t port)
 {
 #ifdef CONFIG_OMAP1510
 	/* If can't cleanly clock 115200 set div to 1 */
-	if ((CFG_NS16550_CLK == 12000000) && (gd->baudrate == 115200)) {
+	if ((CONFIG_SYS_NS16550_CLK == 12000000) && (gd->baudrate == 115200)) {
 		port->osc_12m_sel = OSC_12M_SEL;	/* enable 6.5 * divisor */
 		return (1);				/* return 1 for base divisor */
 	}
@@ -134,7 +134,7 @@ static int calc_divisor (NS16550_t port)
 #endif
 #ifdef CONFIG_OMAP1610
 	/* If can't cleanly clock 115200 set div to 1 */
-	if ((CFG_NS16550_CLK == 48000000) && (gd->baudrate == 115200)) {
+	if ((CONFIG_SYS_NS16550_CLK == 48000000) && (gd->baudrate == 115200)) {
 		return (26);		/* return 26 for base divisor */
 	}
 #endif
@@ -146,11 +146,11 @@ static int calc_divisor (NS16550_t port)
 #endif
 
 	/* Compute divisor value. Normally, we should simply return:
-	 *   CFG_NS16550_CLK) / MODE_X_DIV / gd->baudrate
+	 *   CONFIG_SYS_NS16550_CLK) / MODE_X_DIV / gd->baudrate
 	 * but we need to round that value by adding 0.5.
 	 * Rounding is especially important at high baud rates.
 	 */
-	return (CFG_NS16550_CLK + (gd->baudrate * (MODE_X_DIV / 2))) /
+	return (CONFIG_SYS_NS16550_CLK + (gd->baudrate * (MODE_X_DIV / 2))) /
 		(MODE_X_DIV * gd->baudrate);
 }
 
@@ -163,19 +163,19 @@ int serial_init (void)
 	initialise_ns87308();
 #endif
 
-#ifdef CFG_NS16550_COM1
+#ifdef CONFIG_SYS_NS16550_COM1
 	clock_divisor = calc_divisor(serial_ports[0]);
 	NS16550_init(serial_ports[0], clock_divisor);
 #endif
-#ifdef CFG_NS16550_COM2
+#ifdef CONFIG_SYS_NS16550_COM2
 	clock_divisor = calc_divisor(serial_ports[1]);
 	NS16550_init(serial_ports[1], clock_divisor);
 #endif
-#ifdef CFG_NS16550_COM3
+#ifdef CONFIG_SYS_NS16550_COM3
 	clock_divisor = calc_divisor(serial_ports[2]);
 	NS16550_init(serial_ports[2], clock_divisor);
 #endif
-#ifdef CFG_NS16550_COM4
+#ifdef CONFIG_SYS_NS16550_COM4
 	clock_divisor = calc_divisor(serial_ports[3]);
 	NS16550_init(serial_ports[3], clock_divisor);
 #endif
diff --git a/drivers/serial/serial_pl011.c b/drivers/serial/serial_pl011.c
deleted file mode 100644
index 4d35fe5e9..000000000
--- a/drivers/serial/serial_pl011.c
+++ /dev/null
@@ -1,161 +0,0 @@
-/*
- * (C) Copyright 2000
- * Rob Taylor, Flying Pig Systems. robt@flyingpig.com.
- *
- * (C) Copyright 2004
- * ARM Ltd.
- * Philippe Robin, <philippe.robin@arm.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/* Simple U-Boot driver for the PrimeCell PL011 UARTs on the IntegratorCP */
-/* Should be fairly simple to make it work with the PL010 as well */
-
-#include <common.h>
-
-#ifdef CFG_PL011_SERIAL
-
-#include "serial_pl011.h"
-
-#define IO_WRITE(addr, val) (*(volatile unsigned int *)(addr) = (val))
-#define IO_READ(addr) (*(volatile unsigned int *)(addr))
-
-/*
- * IntegratorCP has two UARTs, use the first one, at 38400-8-N-1
- * Versatile PB has four UARTs.
- */
-
-#define CONSOLE_PORT CONFIG_CONS_INDEX
-#define baudRate CONFIG_BAUDRATE
-static volatile unsigned char *const port[] = CONFIG_PL01x_PORTS;
-#define NUM_PORTS (sizeof(port)/sizeof(port[0]))
-
-static void pl011_putc (int portnum, char c);
-static int pl011_getc (int portnum);
-static int pl011_tstc (int portnum);
-
-
-int serial_init (void)
-{
-	unsigned int temp;
-	unsigned int divider;
-	unsigned int remainder;
-	unsigned int fraction;
-
-	/*
-	 ** First, disable everything.
-	 */
-	IO_WRITE (port[CONSOLE_PORT] + UART_PL011_CR, 0x0);
-
-	/*
-	 ** Set baud rate
-	 **
-	 ** IBRD = UART_CLK / (16 * BAUD_RATE)
-	 ** FBRD = ROUND((64 * MOD(UART_CLK,(16 * BAUD_RATE))) / (16 * BAUD_RATE))
-	 */
-	temp = 16 * baudRate;
-	divider = CONFIG_PL011_CLOCK / temp;
-	remainder = CONFIG_PL011_CLOCK % temp;
-	temp = (8 * remainder) / baudRate;
-	fraction = (temp >> 1) + (temp & 1);
-
-	IO_WRITE (port[CONSOLE_PORT] + UART_PL011_IBRD, divider);
-	IO_WRITE (port[CONSOLE_PORT] + UART_PL011_FBRD, fraction);
-
-	/*
-	 ** Set the UART to be 8 bits, 1 stop bit, no parity, fifo enabled.
-	 */
-	IO_WRITE (port[CONSOLE_PORT] + UART_PL011_LCRH,
-		  (UART_PL011_LCRH_WLEN_8 | UART_PL011_LCRH_FEN));
-
-	/*
-	 ** Finally, enable the UART
-	 */
-	IO_WRITE (port[CONSOLE_PORT] + UART_PL011_CR,
-		  (UART_PL011_CR_UARTEN | UART_PL011_CR_TXE |
-		   UART_PL011_CR_RXE));
-
-	return 0;
-}
-
-void serial_putc (const char c)
-{
-	if (c == '\n')
-		pl011_putc (CONSOLE_PORT, '\r');
-
-	pl011_putc (CONSOLE_PORT, c);
-}
-
-void serial_puts (const char *s)
-{
-	while (*s) {
-		serial_putc (*s++);
-	}
-}
-
-int serial_getc (void)
-{
-	return pl011_getc (CONSOLE_PORT);
-}
-
-int serial_tstc (void)
-{
-	return pl011_tstc (CONSOLE_PORT);
-}
-
-void serial_setbrg (void)
-{
-}
-
-static void pl011_putc (int portnum, char c)
-{
-	/* Wait until there is space in the FIFO */
-	while (IO_READ (port[portnum] + UART_PL01x_FR) & UART_PL01x_FR_TXFF);
-
-	/* Send the character */
-	IO_WRITE (port[portnum] + UART_PL01x_DR, c);
-}
-
-static int pl011_getc (int portnum)
-{
-	unsigned int data;
-
-	/* Wait until there is data in the FIFO */
-	while (IO_READ (port[portnum] + UART_PL01x_FR) & UART_PL01x_FR_RXFE);
-
-	data = IO_READ (port[portnum] + UART_PL01x_DR);
-
-	/* Check for an error flag */
-	if (data & 0xFFFFFF00) {
-		/* Clear the error */
-		IO_WRITE (port[portnum] + UART_PL01x_ECR, 0xFFFFFFFF);
-		return -1;
-	}
-
-	return (int) data;
-}
-
-static int pl011_tstc (int portnum)
-{
-	return !(IO_READ (port[portnum] + UART_PL01x_FR) &
-		 UART_PL01x_FR_RXFE);
-}
-
-#endif
diff --git a/drivers/serial/serial_pl010.c b/drivers/serial/serial_pl01x.c
index 134ed0967..c645cef87 100644
--- a/drivers/serial/serial_pl010.c
+++ b/drivers/serial/serial_pl01x.c
@@ -25,30 +25,31 @@
  * MA 02111-1307 USA
  */
 
-/* Simple U-Boot driver for the PrimeCell PL011 UARTs on the IntegratorCP */
-/* Should be fairly simple to make it work with the PL010 as well */
+/* Simple U-Boot driver for the PrimeCell PL010/PL011 UARTs */
 
 #include <common.h>
 #include <watchdog.h>
 
-#ifdef CFG_PL010_SERIAL
-
-#include "serial_pl011.h"
+#include "serial_pl01x.h"
 
 #define IO_WRITE(addr, val) (*(volatile unsigned int *)(addr) = (val))
 #define IO_READ(addr) (*(volatile unsigned int *)(addr))
 
-/* Integrator AP has two UARTs, we use the first one, at 38400-8-N-1 */
+/*
+ * Integrator AP has two UARTs, we use the first one, at 38400-8-N-1
+ * Integrator CP has two UARTs, use the first one, at 38400-8-N-1
+ * Versatile PB has four UARTs.
+ */
 #define CONSOLE_PORT CONFIG_CONS_INDEX
 #define baudRate CONFIG_BAUDRATE
 static volatile unsigned char *const port[] = CONFIG_PL01x_PORTS;
 #define NUM_PORTS (sizeof(port)/sizeof(port[0]))
 
+static void pl01x_putc (int portnum, char c);
+static int pl01x_getc (int portnum);
+static int pl01x_tstc (int portnum);
 
-static void pl010_putc (int portnum, char c);
-static int pl010_getc (int portnum);
-static int pl010_tstc (int portnum);
-
+#ifdef CONFIG_PL010_SERIAL
 
 int serial_init (void)
 {
@@ -103,15 +104,64 @@ int serial_init (void)
 	 */
 	IO_WRITE (port[CONSOLE_PORT] + UART_PL010_CR, (UART_PL010_CR_UARTEN));
 
-	return (0);
+	return 0;
 }
 
+#endif /* CONFIG_PL010_SERIAL */
+
+#ifdef CONFIG_PL011_SERIAL
+
+int serial_init (void)
+{
+	unsigned int temp;
+	unsigned int divider;
+	unsigned int remainder;
+	unsigned int fraction;
+
+	/*
+	 ** First, disable everything.
+	 */
+	IO_WRITE (port[CONSOLE_PORT] + UART_PL011_CR, 0x0);
+
+	/*
+	 ** Set baud rate
+	 **
+	 ** IBRD = UART_CLK / (16 * BAUD_RATE)
+	 ** FBRD = ROUND((64 * MOD(UART_CLK,(16 * BAUD_RATE))) / (16 * BAUD_RATE))
+	 */
+	temp = 16 * baudRate;
+	divider = CONFIG_PL011_CLOCK / temp;
+	remainder = CONFIG_PL011_CLOCK % temp;
+	temp = (8 * remainder) / baudRate;
+	fraction = (temp >> 1) + (temp & 1);
+
+	IO_WRITE (port[CONSOLE_PORT] + UART_PL011_IBRD, divider);
+	IO_WRITE (port[CONSOLE_PORT] + UART_PL011_FBRD, fraction);
+
+	/*
+	 ** Set the UART to be 8 bits, 1 stop bit, no parity, fifo enabled.
+	 */
+	IO_WRITE (port[CONSOLE_PORT] + UART_PL011_LCRH,
+		  (UART_PL011_LCRH_WLEN_8 | UART_PL011_LCRH_FEN));
+
+	/*
+	 ** Finally, enable the UART
+	 */
+	IO_WRITE (port[CONSOLE_PORT] + UART_PL011_CR,
+		  (UART_PL011_CR_UARTEN | UART_PL011_CR_TXE |
+		   UART_PL011_CR_RXE));
+
+	return 0;
+}
+
+#endif /* CONFIG_PL011_SERIAL */
+
 void serial_putc (const char c)
 {
 	if (c == '\n')
-		pl010_putc (CONSOLE_PORT, '\r');
+		pl01x_putc (CONSOLE_PORT, '\r');
 
-	pl010_putc (CONSOLE_PORT, c);
+	pl01x_putc (CONSOLE_PORT, c);
 }
 
 void serial_puts (const char *s)
@@ -123,19 +173,19 @@ void serial_puts (const char *s)
 
 int serial_getc (void)
 {
-	return pl010_getc (CONSOLE_PORT);
+	return pl01x_getc (CONSOLE_PORT);
 }
 
 int serial_tstc (void)
 {
-	return pl010_tstc (CONSOLE_PORT);
+	return pl01x_tstc (CONSOLE_PORT);
 }
 
 void serial_setbrg (void)
 {
 }
 
-static void pl010_putc (int portnum, char c)
+static void pl01x_putc (int portnum, char c)
 {
 	/* Wait until there is space in the FIFO */
 	while (IO_READ (port[portnum] + UART_PL01x_FR) & UART_PL01x_FR_TXFF)
@@ -145,7 +195,7 @@ static void pl010_putc (int portnum, char c)
 	IO_WRITE (port[portnum] + UART_PL01x_DR, c);
 }
 
-static int pl010_getc (int portnum)
+static int pl01x_getc (int portnum)
 {
 	unsigned int data;
 
@@ -165,11 +215,9 @@ static int pl010_getc (int portnum)
 	return (int) data;
 }
 
-static int pl010_tstc (int portnum)
+static int pl01x_tstc (int portnum)
 {
 	WATCHDOG_RESET();
 	return !(IO_READ (port[portnum] + UART_PL01x_FR) &
 		 UART_PL01x_FR_RXFE);
 }
-
-#endif
diff --git a/drivers/serial/serial_pl011.h b/drivers/serial/serial_pl01x.h
index 5f20fdd10..5f20fdd10 100644
--- a/drivers/serial/serial_pl011.h
+++ b/drivers/serial/serial_pl01x.h
diff --git a/drivers/serial/serial_sh.c b/drivers/serial/serial_sh.c
index 61c2b82c0..1d76a194a 100644
--- a/drivers/serial/serial_sh.c
+++ b/drivers/serial/serial_sh.c
@@ -76,7 +76,7 @@
 # define FIFOLEVEL_MASK	0xFF
 # endif
 #elif defined(CONFIG_CPU_SH7723)
-# if defined(CONIFG_SCIF_A)
+# if defined(CONFIG_SCIF_A)
 # define SCLSR	SCFSR
 # define LSR_ORER	0x0200
 # define FIFOLEVEL_MASK	0x3F
@@ -94,7 +94,7 @@
 # define LSR_ORER	1
 # define FIFOLEVEL_MASK	0x1F
 #elif defined(CONFIG_CPU_SH7720)
-# define SCLSR		(vu_short *)(SCIF_BASE + 0x24)
+# define SCLSR		SCFSR
 # define LSR_ORER	0x0200
 # define FIFOLEVEL_MASK	0x1F
 #elif defined(CONFIG_CPU_SH7710) || \
diff --git a/drivers/serial/usbtty.c b/drivers/serial/usbtty.c
index e738c5627..7eba470e4 100644
--- a/drivers/serial/usbtty.c
+++ b/drivers/serial/usbtty.c
@@ -22,16 +22,14 @@
  */
 
 #include <common.h>
-
+#include <config.h>
 #include <circbuf.h>
 #include <devices.h>
 #include "usbtty.h"
 #include "usb_cdc_acm.h"
 #include "usbdescriptors.h"
-#include <config.h>		/* If defined, override Linux identifiers with
-				 * vendor specific ones */
 
-#if 0
+#ifdef DEBUG
 #define TTYDBG(fmt,args...)\
 	serial_printf("[%s] %s %d: "fmt, __FILE__,__FUNCTION__,__LINE__,##args)
 #else
diff --git a/drivers/serial/usbtty.h b/drivers/serial/usbtty.h
index 71c47bc5d..ecefde549 100644
--- a/drivers/serial/usbtty.h
+++ b/drivers/serial/usbtty.h
@@ -24,11 +24,11 @@
 #ifndef __USB_TTY_H__
 #define __USB_TTY_H__
 
-#include "usbdcore.h"
+#include <usbdcore.h>
 #if defined(CONFIG_PPC)
-#include "usbdcore_mpc8xx.h"
+#include <usbdcore_mpc8xx.h>
 #elif defined(CONFIG_ARM)
-#include "usbdcore_omap1510.h"
+#include <usbdcore_omap1510.h>
 #endif
 
 #include <version_autogenerated.h>
@@ -36,14 +36,25 @@
 /* If no VendorID/ProductID is defined in config.h, pretend to be Linux
  * DO NOT Reuse this Vendor/Product setup with protocol incompatible devices */
 
-#define CONFIG_USBD_VENDORID 0x0525	/* Linux/NetChip */
-#define CONFIG_USBD_PRODUCTID_GSERIAL 0xa4a6	/* gserial */
-#define CONFIG_USBD_PRODUCTID_CDCACM  0xa4a7	/* CDC ACM */
-#define CONFIG_USBD_MANUFACTURER "Das U-Boot"
-#define CONFIG_USBD_PRODUCT_NAME U_BOOT_VERSION
-
+#ifndef CONFIG_USBD_VENDORID
+#define CONFIG_USBD_VENDORID		0x0525	/* Linux/NetChip */
+#endif
+#ifndef CONFIG_USBD_PRODUCTID_GSERIAL
+#define CONFIG_USBD_PRODUCTID_GSERIAL	0xa4a6	/* gserial */
+#endif
+#ifndef CONFIG_USBD_PRODUCTID_CDCACM
+#define CONFIG_USBD_PRODUCTID_CDCACM	0xa4a7	/* CDC ACM */
+#endif
+#ifndef CONFIG_USBD_MANUFACTURER
+#define CONFIG_USBD_MANUFACTURER	"Das U-Boot"
+#endif
+#ifndef CONFIG_USBD_PRODUCT_NAME
+#define CONFIG_USBD_PRODUCT_NAME	U_BOOT_VERSION
+#endif
 
-#define CONFIG_USBD_CONFIGURATION_STR "TTY via USB"
+#ifndef CONFIG_USBD_CONFIGURATION_STR
+#define CONFIG_USBD_CONFIGURATION_STR	"TTY via USB"
+#endif
 
 #define CONFIG_USBD_SERIAL_OUT_ENDPOINT UDC_OUT_ENDPOINT
 #define CONFIG_USBD_SERIAL_OUT_PKTSIZE	UDC_OUT_PACKET_SIZE
diff --git a/drivers/serial/vcth.c b/drivers/serial/vcth.c
new file mode 100755
index 000000000..2c847d08a
--- /dev/null
+++ b/drivers/serial/vcth.c
@@ -0,0 +1,121 @@
+/*
+ * (C) Copyright 2008 Stefan Roese <sr@denx.de>, DENX Software Engineering
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+#include <common.h>
+#include <asm/io.h>
+
+#define UART_1_BASE		0xBF89C000
+
+#define	UART_RBR_OFF		0x00	/* receiver buffer reg		*/
+#define	UART_THR_OFF		0x00	/* transmit holding  reg	*/
+#define	UART_DLL_OFF		0x00	/* divisor latch low reg	*/
+#define	UART_IER_OFF		0x04	/* interrupt enable reg		*/
+#define	UART_DLH_OFF		0x04	/* receiver buffer reg		*/
+#define	UART_FCR_OFF		0x08	/* fifo control register	*/
+#define	UART_LCR_OFF		0x0c	/* line control register	*/
+#define	UART_MCR_OFF		0x10	/* modem control register	*/
+#define	UART_LSR_OFF		0x14	/* line status register		*/
+#define	UART_MSR_OFF		0x18	/* modem status register	*/
+#define	UART_SCR_OFF		0x1c	/* scratch pad register		*/
+
+#define UART_RCV_DATA_RDY	0x01	/* Data Received		*/
+#define UART_XMT_HOLD_EMPTY	0x20
+#define UART_TRANSMIT_EMPTY	0x40
+
+/* 7 bit on line control reg. enalbing rw to dll and dlh */
+#define UART_LCR_DLAB		0x0080
+
+#define UART___9600_BDR		0x84
+#define UART__19200_BDR		0x42
+#define UART_115200_BDR		0x08
+
+#define UART_DIS_ALL_INTER	0x00	/* disable all interrupts	*/
+
+#define UART_5DATA_BITS		0x0000	/*   5 [bits]  1.5 bits   2	*/
+#define UART_6DATA_BITS		0x0001	/*   6 [bits]  1   bits   2	*/
+#define UART_7DATA_BITS		0x0002	/*   7 [bits]  1   bits   2	*/
+#define UART_8DATA_BITS		0x0003	/*   8 [bits]  1   bits   2	*/
+
+static void vcth_uart_set_baud_rate(u32 address, u32 dh, u32 dl)
+{
+	u32 val = __raw_readl(UART_1_BASE + UART_LCR_OFF);
+
+	/* set 7 bit on 1 */
+	val |= UART_LCR_DLAB;
+	__raw_writel(val, UART_1_BASE + UART_LCR_OFF);
+
+	__raw_writel(dl, UART_1_BASE + UART_DLL_OFF);
+	__raw_writel(dh, UART_1_BASE + UART_DLH_OFF);
+
+	/* set 7 bit on 0 */
+	val &= ~UART_LCR_DLAB;
+	__raw_writel(val, UART_1_BASE + UART_LCR_OFF);
+
+	return;
+}
+
+int serial_init(void)
+{
+	__raw_writel(UART_DIS_ALL_INTER, UART_1_BASE + UART_IER_OFF);
+	vcth_uart_set_baud_rate(UART_1_BASE, 0, UART_115200_BDR);
+	__raw_writel(UART_8DATA_BITS, UART_1_BASE + UART_LCR_OFF);
+
+	return 0;
+}
+
+void serial_setbrg(void)
+{
+	/*
+	 * Baudrate change not supported currently, fixed to 115200 baud
+	 */
+}
+
+void serial_putc(const char c)
+{
+	if (c == '\n')
+		serial_putc('\r');
+
+	while (!(UART_XMT_HOLD_EMPTY & __raw_readl(UART_1_BASE + UART_LSR_OFF)))
+		;
+
+	__raw_writel(c, UART_1_BASE + UART_THR_OFF);
+}
+
+void serial_puts(const char *s)
+{
+	while (*s)
+		serial_putc(*s++);
+}
+
+int serial_getc(void)
+{
+	while (!(UART_RCV_DATA_RDY & __raw_readl(UART_1_BASE + UART_LSR_OFF)))
+		;
+
+	return __raw_readl(UART_1_BASE + UART_RBR_OFF) & 0xff;
+}
+
+int serial_tstc(void)
+{
+	if (!(UART_RCV_DATA_RDY & __raw_readl(UART_1_BASE + UART_LSR_OFF)))
+		return 0;
+
+	return 1;
+}
diff --git a/drivers/spi/mpc8xxx_spi.c b/drivers/spi/mpc8xxx_spi.c
index 9eaf9860b..c4b36f06c 100644
--- a/drivers/spi/mpc8xxx_spi.c
+++ b/drivers/spi/mpc8xxx_spi.c
@@ -67,7 +67,7 @@ void spi_free_slave(struct spi_slave *slave)
 
 void spi_init(void)
 {
-	volatile spi8xxx_t *spi = &((immap_t *) (CFG_IMMR))->spi;
+	volatile spi8xxx_t *spi = &((immap_t *) (CONFIG_SYS_IMMR))->spi;
 
 	/*
 	 * SPI pins on the MPC83xx are not muxed, so all we do is initialize
@@ -94,7 +94,7 @@ void spi_release_bus(struct spi_slave *slave)
 int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *dout,
 		void *din, unsigned long flags)
 {
-	volatile spi8xxx_t *spi = &((immap_t *) (CFG_IMMR))->spi;
+	volatile spi8xxx_t *spi = &((immap_t *) (CONFIG_SYS_IMMR))->spi;
 	unsigned int tmpdout, tmpdin, event;
 	int numBlks = bitlen / 32 + (bitlen % 32 ? 1 : 0);
 	int tm, isRead = 0;
diff --git a/drivers/spi/soft_spi.c b/drivers/spi/soft_spi.c
index 25b589ad7..13df8cb7d 100644
--- a/drivers/spi/soft_spi.c
+++ b/drivers/spi/soft_spi.c
@@ -59,7 +59,7 @@ static inline struct soft_spi_slave *to_soft_spi(struct spi_slave *slave)
 void spi_init (void)
 {
 #ifdef	SPI_INIT
-	volatile immap_t *immr = (immap_t *)CFG_IMMR;
+	volatile immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
 
 	SPI_INIT;
 #endif
@@ -95,8 +95,8 @@ void spi_free_slave(struct spi_slave *slave)
 
 int spi_claim_bus(struct spi_slave *slave)
 {
-#ifdef CFG_IMMR
-	volatile immap_t *immr = (immap_t *)CFG_IMMR;
+#ifdef CONFIG_SYS_IMMR
+	volatile immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
 #endif
 	struct soft_spi_slave *ss = to_soft_spi(slave);
 
@@ -132,8 +132,8 @@ void spi_release_bus(struct spi_slave *slave)
 int  spi_xfer(struct spi_slave *slave, unsigned int bitlen,
 		const void *dout, void *din, unsigned long flags)
 {
-#ifdef CFG_IMMR
-	volatile immap_t *immr = (immap_t *)CFG_IMMR;
+#ifdef CONFIG_SYS_IMMR
+	volatile immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
 #endif
 	struct soft_spi_slave *ss = to_soft_spi(slave);
 	uchar		tmpdin  = 0;
diff --git a/drivers/usb/Makefile b/drivers/usb/Makefile
index c67a490f0..856f51a75 100644
--- a/drivers/usb/Makefile
+++ b/drivers/usb/Makefile
@@ -25,15 +25,22 @@ include $(TOPDIR)/config.mk
 
 LIB	:= $(obj)libusb.a
 
+# core
+COBJS-y += usbdcore.o
+COBJS-$(CONFIG_USB_OHCI_NEW) += usb_ohci.o
+
+# host
+COBJS-$(CONFIG_USB_ISP116X_HCD) += isp116x-hcd.o
 COBJS-$(CONFIG_USB_R8A66597_HCD) += r8a66597-hcd.o
+COBJS-$(CONFIG_USB_SL811HS) += sl811_usb.o
 
-COBJS-y += isp116x-hcd.o
-COBJS-y += sl811_usb.o
-COBJS-y += usb_ohci.o
-COBJS-y += usbdcore.o
+# device
+ifdef CONFIG_USB_DEVICE
 COBJS-y += usbdcore_ep0.o
-COBJS-y += usbdcore_mpc8xx.o
-COBJS-y += usbdcore_omap1510.o
+COBJS-$(CONFIG_OMAP1510) += usbdcore_omap1510.o
+COBJS-$(CONFIG_OMAP1610) += usbdcore_omap1510.o
+COBJS-$(CONFIG_MPC885_FAMILY) += usbdcore_mpc8xx.o
+endif
 
 COBJS	:= $(COBJS-y)
 SRCS	:= $(COBJS:.o=.c)
diff --git a/drivers/usb/isp116x-hcd.c b/drivers/usb/isp116x-hcd.c
index 6b9b23bc6..348e404fe 100644
--- a/drivers/usb/isp116x-hcd.c
+++ b/drivers/usb/isp116x-hcd.c
@@ -56,8 +56,6 @@
  */
 
 #include <common.h>
-
-#ifdef CONFIG_USB_ISP116X_HCD
 #include <asm/io.h>
 #include <usb.h>
 #include <malloc.h>
@@ -687,7 +685,7 @@ retry_same:
 	/* Start the data transfer */
 
 	/* Allow more time for a BULK device to react - some are slow */
-	if (usb_pipetype(pipe) == PIPE_BULK)
+	if (usb_pipebulk(pipe))
 		timeout = 5000;
 	else
 		timeout = 100;
@@ -822,7 +820,7 @@ static int isp116x_submit_rh_msg(struct usb_device *dev, unsigned long pipe,
 	u16 wIndex;
 	u16 wLength;
 
-	if ((pipe & PIPE_INTERRUPT) == PIPE_INTERRUPT) {
+	if (usb_pipeint(pipe)) {
 		INFO("Root-Hub submit IRQ: NOT implemented");
 		return 0;
 	}
@@ -1441,5 +1439,3 @@ int usb_lowlevel_stop(void)
 
 	return 0;
 }
-
-#endif				/* CONFIG_USB_ISP116X_HCD */
diff --git a/drivers/usb/r8a66597-hcd.c b/drivers/usb/r8a66597-hcd.c
index 0d3931e10..288f41a8b 100644
--- a/drivers/usb/r8a66597-hcd.c
+++ b/drivers/usb/r8a66597-hcd.c
@@ -530,7 +530,7 @@ static int check_usb_device_connecting(struct r8a66597 *r8a66597)
 
 /* based on usb_ohci.c */
 #define min_t(type, x, y) \
-		({ type __x = (x); type __y = (y); __x < __y ? __x: __y; })
+		({ type __x = (x); type __y = (y); __x < __y ? __x : __y; })
 /*-------------------------------------------------------------------------*
  * Virtual Root Hub
  *-------------------------------------------------------------------------*/
@@ -654,7 +654,7 @@ static int r8a66597_submit_rh_msg(struct usb_device *dev, unsigned long pipe,
 
 	R8A66597_DPRINT("%s\n", __func__);
 
-	if ((pipe & PIPE_INTERRUPT) == PIPE_INTERRUPT) {
+	if (usb_pipeint(pipe)) {
 		printf("Root-Hub submit IRQ: NOT implemented");
 		return 0;
 	}
@@ -794,7 +794,7 @@ static int r8a66597_submit_rh_msg(struct usb_device *dev, unsigned long pipe,
 	case RH_SET_CONFIGURATION:
 		break;
 	default:
-		dbg("unsupported root hub command");
+		R8A66597_DPRINT("unsupported root hub command");
 		stat = USB_ST_STALLED;
 	}
 
diff --git a/drivers/usb/sl811_usb.c b/drivers/usb/sl811_usb.c
index 159cc2527..a03e469d1 100644
--- a/drivers/usb/sl811_usb.c
+++ b/drivers/usb/sl811_usb.c
@@ -36,7 +36,6 @@
  */
 
 #include <common.h>
-#ifdef CONFIG_USB_SL811HS
 #include <mpc8xx.h>
 #include <usb.h>
 #include "sl811.h"
@@ -111,7 +110,7 @@ static void inline sl811_write_buf(__u8 offset, __u8 *buf, __u8 size)
 
 int usb_init_kup4x (void)
 {
-	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
 	volatile memctl8xx_t *memctl = &immap->im_memctl;
 	int i;
 	unsigned char tmp;
@@ -265,7 +264,7 @@ static int sl811_send_packet(struct usb_device *dev, unsigned long pipe, __u8 *b
 
 		sl811_write(SL811_CTRL_A, ctrl);
 		while (!(sl811_read(SL811_INTRSTS) & SL811_INTR_DONE_A)) {
-			if (5*CFG_HZ < get_timer(time_start)) {
+			if (5*CONFIG_SYS_HZ < get_timer(time_start)) {
 				printf("USB transmit timed out\n");
 				return -USB_ST_CRC_ERR;
 			}
@@ -733,5 +732,3 @@ static int sl811_rh_submit_urb(struct usb_device *usb_dev, unsigned long pipe,
 
 	return status == 0 ? len : status;
 }
-
-#endif	/* CONFIG_USB_SL811HS */
diff --git a/drivers/usb/usb_ohci.c b/drivers/usb/usb_ohci.c
index 0bfa4d782..d68fdcf06 100644
--- a/drivers/usb/usb_ohci.c
+++ b/drivers/usb/usb_ohci.c
@@ -46,9 +46,6 @@
  */
 
 #include <common.h>
-
-#ifdef CONFIG_USB_OHCI_NEW
-
 #include <asm/byteorder.h>
 
 #if defined(CONFIG_PCI_OHCI)
@@ -73,7 +70,7 @@
     defined(CONFIG_440EP) || \
     defined(CONFIG_PCI_OHCI) || \
     defined(CONFIG_MPC5200) || \
-    defined(CFG_OHCI_USE_NPS)
+    defined(CONFIG_SYS_OHCI_USE_NPS)
 # define OHCI_USE_NPS		/* force NoPowerSwitching mode */
 #endif
 
@@ -89,15 +86,16 @@
 /*
  * e.g. PCI controllers need this
  */
-#ifdef CFG_OHCI_SWAP_REG_ACCESS
+#ifdef CONFIG_SYS_OHCI_SWAP_REG_ACCESS
 # define readl(a) __swap_32(*((volatile u32 *)(a)))
 # define writel(a, b) (*((volatile u32 *)(b)) = __swap_32((volatile u32)a))
 #else
 # define readl(a) (*((volatile u32 *)(a)))
 # define writel(a, b) (*((volatile u32 *)(b)) = ((volatile u32)a))
-#endif /* CFG_OHCI_SWAP_REG_ACCESS */
+#endif /* CONFIG_SYS_OHCI_SWAP_REG_ACCESS */
 
-#define min_t(type,x,y) ({ type __x = (x); type __y = (y); __x < __y ? __x: __y; })
+#define min_t(type, x, y) \
+		    ({ type __x = (x); type __y = (y); __x < __y ? __x: __y; })
 
 #ifdef CONFIG_PCI_OHCI
 static struct pci_device_id ohci_pci_ids[] = {
@@ -109,25 +107,33 @@ static struct pci_device_id ohci_pci_ids[] = {
 };
 #endif
 
+#ifdef CONFIG_PCI_EHCI_DEVNO
+static struct pci_device_id ehci_pci_ids[] = {
+	{0x1131, 0x1562},	/* Philips 1562 PCI EHCI module ids */
+	/* Please add supported PCI EHCI controller ids here */
+	{0, 0}
+};
+#endif
+
 #ifdef DEBUG
 #define dbg(format, arg...) printf("DEBUG: " format "\n", ## arg)
 #else
-#define dbg(format, arg...) do {} while(0)
+#define dbg(format, arg...) do {} while (0)
 #endif /* DEBUG */
 #define err(format, arg...) printf("ERROR: " format "\n", ## arg)
 #ifdef SHOW_INFO
 #define info(format, arg...) printf("INFO: " format "\n", ## arg)
 #else
-#define info(format, arg...) do {} while(0)
+#define info(format, arg...) do {} while (0)
 #endif
 
-#ifdef CFG_OHCI_BE_CONTROLLER
+#ifdef CONFIG_SYS_OHCI_BE_CONTROLLER
 # define m16_swap(x) cpu_to_be16(x)
 # define m32_swap(x) cpu_to_be32(x)
 #else
 # define m16_swap(x) cpu_to_le16(x)
 # define m32_swap(x) cpu_to_le32(x)
-#endif /* CFG_OHCI_BE_CONTROLLER */
+#endif /* CONFIG_SYS_OHCI_BE_CONTROLLER */
 
 /* global ohci_t */
 static ohci_t gohci;
@@ -137,25 +143,24 @@ struct ohci_hcca ghcca[1];
 struct ohci_hcca *phcca;
 /* this allocates EDs for all possible endpoints */
 struct ohci_device ohci_dev;
-/* RHSC flag */
-int got_rhsc;
 /* device which was disconnected */
 struct usb_device *devgone;
 
-static inline u32 roothub_a (struct ohci *hc)
-	{ return readl (&hc->regs->roothub.a); }
-static inline u32 roothub_b (struct ohci *hc)
-	{ return readl (&hc->regs->roothub.b); }
-static inline u32 roothub_status (struct ohci *hc)
-	{ return readl (&hc->regs->roothub.status); }
-static inline u32 roothub_portstatus (struct ohci *hc, int i)
-	{ return readl (&hc->regs->roothub.portstatus[i]); }
+static inline u32 roothub_a(struct ohci *hc)
+	{ return readl(&hc->regs->roothub.a); }
+static inline u32 roothub_b(struct ohci *hc)
+	{ return readl(&hc->regs->roothub.b); }
+static inline u32 roothub_status(struct ohci *hc)
+	{ return readl(&hc->regs->roothub.status); }
+static inline u32 roothub_portstatus(struct ohci *hc, int i)
+	{ return readl(&hc->regs->roothub.portstatus[i]); }
 
 /* forward declaration */
-static int hc_interrupt (void);
-static void
-td_submit_job (struct usb_device * dev, unsigned long pipe, void * buffer,
-	int transfer_len, struct devrequest * setup, urb_priv_t * urb, int interval);
+static int hc_interrupt(void);
+static void td_submit_job(struct usb_device *dev, unsigned long pipe,
+			  void *buffer, int transfer_len,
+			  struct devrequest *setup, urb_priv_t *urb,
+			  int interval);
 
 /*-------------------------------------------------------------------------*
  * URB support functions
@@ -163,11 +168,11 @@ td_submit_job (struct usb_device * dev, unsigned long pipe, void * buffer,
 
 /* free HCD-private data associated with this URB */
 
-static void urb_free_priv (urb_priv_t * urb)
+static void urb_free_priv(urb_priv_t *urb)
 {
 	int		i;
 	int		last;
-	struct td	* td;
+	struct td	*td;
 
 	last = urb->length - 1;
 	if (last >= 0) {
@@ -185,72 +190,74 @@ static void urb_free_priv (urb_priv_t * urb)
 /*-------------------------------------------------------------------------*/
 
 #ifdef DEBUG
-static int sohci_get_current_frame_number (struct usb_device * dev);
+static int sohci_get_current_frame_number(struct usb_device *dev);
 
 /* debug| print the main components of an URB
  * small: 0) header + data packets 1) just header */
 
-static void pkt_print (urb_priv_t *purb, struct usb_device * dev,
-	unsigned long pipe, void * buffer,
-	int transfer_len, struct devrequest * setup, char * str, int small)
+static void pkt_print(urb_priv_t *purb, struct usb_device *dev,
+		      unsigned long pipe, void *buffer, int transfer_len,
+		      struct devrequest *setup, char *str, int small)
 {
-	dbg("%s URB:[%4x] dev:%2d,ep:%2d-%c,type:%s,len:%d/%d stat:%#lx",
+	dbg("%s URB:[%4x] dev:%2lu,ep:%2lu-%c,type:%s,len:%d/%d stat:%#lx",
 			str,
-			sohci_get_current_frame_number (dev),
-			usb_pipedevice (pipe),
-			usb_pipeendpoint (pipe),
-			usb_pipeout (pipe)? 'O': 'I',
-			usb_pipetype (pipe) < 2? (usb_pipeint (pipe)? "INTR": "ISOC"):
-				(usb_pipecontrol (pipe)? "CTRL": "BULK"),
+			sohci_get_current_frame_number(dev),
+			usb_pipedevice(pipe),
+			usb_pipeendpoint(pipe),
+			usb_pipeout(pipe)? 'O': 'I',
+			usb_pipetype(pipe) < 2 ? \
+				(usb_pipeint(pipe)? "INTR": "ISOC"): \
+				(usb_pipecontrol(pipe)? "CTRL": "BULK"),
 			(purb ? purb->actual_length : 0),
 			transfer_len, dev->status);
 #ifdef	OHCI_VERBOSE_DEBUG
 	if (!small) {
 		int i, len;
 
-		if (usb_pipecontrol (pipe)) {
-			printf (__FILE__ ": cmd(8):");
+		if (usb_pipecontrol(pipe)) {
+			printf(__FILE__ ": cmd(8):");
 			for (i = 0; i < 8 ; i++)
-				printf (" %02x", ((__u8 *) setup) [i]);
-			printf ("\n");
+				printf(" %02x", ((__u8 *) setup) [i]);
+			printf("\n");
 		}
 		if (transfer_len > 0 && buffer) {
-			printf (__FILE__ ": data(%d/%d):",
+			printf(__FILE__ ": data(%d/%d):",
 				(purb ? purb->actual_length : 0),
 				transfer_len);
-			len = usb_pipeout (pipe)?
-					transfer_len:
+			len = usb_pipeout(pipe)? transfer_len:
 					(purb ? purb->actual_length : 0);
 			for (i = 0; i < 16 && i < len; i++)
-				printf (" %02x", ((__u8 *) buffer) [i]);
-			printf ("%s\n", i < len? "...": "");
+				printf(" %02x", ((__u8 *) buffer) [i]);
+			printf("%s\n", i < len? "...": "");
 		}
 	}
 #endif
 }
 
-/* just for debugging; prints non-empty branches of the int ed tree inclusive iso eds*/
-void ep_print_int_eds (ohci_t *ohci, char * str) {
+/* just for debugging; prints non-empty branches of the int ed tree
+ * inclusive iso eds */
+void ep_print_int_eds(ohci_t *ohci, char *str)
+{
 	int i, j;
-	 __u32 * ed_p;
-	for (i= 0; i < 32; i++) {
+	 __u32 *ed_p;
+	for (i = 0; i < 32; i++) {
 		j = 5;
 		ed_p = &(ohci->hcca->int_table [i]);
 		if (*ed_p == 0)
 		    continue;
-		printf (__FILE__ ": %s branch int %2d(%2x):", str, i, i);
+		printf(__FILE__ ": %s branch int %2d(%2x):", str, i, i);
 		while (*ed_p != 0 && j--) {
 			ed_t *ed = (ed_t *)m32_swap(ed_p);
-			printf (" ed: %4x;", ed->hwINFO);
+			printf(" ed: %4x;", ed->hwINFO);
 			ed_p = &ed->hwNextED;
 		}
-		printf ("\n");
+		printf("\n");
 	}
 }
 
-static void ohci_dump_intr_mask (char *label, __u32 mask)
+static void ohci_dump_intr_mask(char *label, __u32 mask)
 {
-	dbg ("%s: 0x%08x%s%s%s%s%s%s%s%s%s",
+	dbg("%s: 0x%08x%s%s%s%s%s%s%s%s%s",
 		label,
 		mask,
 		(mask & OHCI_INTR_MIE) ? " MIE" : "",
@@ -265,46 +272,46 @@ static void ohci_dump_intr_mask (char *label, __u32 mask)
 		);
 }
 
-static void maybe_print_eds (char *label, __u32 value)
+static void maybe_print_eds(char *label, __u32 value)
 {
 	ed_t *edp = (ed_t *)value;
 
 	if (value) {
-		dbg ("%s %08x", label, value);
-		dbg ("%08x", edp->hwINFO);
-		dbg ("%08x", edp->hwTailP);
-		dbg ("%08x", edp->hwHeadP);
-		dbg ("%08x", edp->hwNextED);
+		dbg("%s %08x", label, value);
+		dbg("%08x", edp->hwINFO);
+		dbg("%08x", edp->hwTailP);
+		dbg("%08x", edp->hwHeadP);
+		dbg("%08x", edp->hwNextED);
 	}
 }
 
-static char * hcfs2string (int state)
+static char *hcfs2string(int state)
 {
 	switch (state) {
-		case OHCI_USB_RESET:	return "reset";
-		case OHCI_USB_RESUME:	return "resume";
-		case OHCI_USB_OPER:	return "operational";
-		case OHCI_USB_SUSPEND:	return "suspend";
+	case OHCI_USB_RESET:	return "reset";
+	case OHCI_USB_RESUME:	return "resume";
+	case OHCI_USB_OPER:	return "operational";
+	case OHCI_USB_SUSPEND:	return "suspend";
 	}
 	return "?";
 }
 
 /* dump control and status registers */
-static void ohci_dump_status (ohci_t *controller)
+static void ohci_dump_status(ohci_t *controller)
 {
 	struct ohci_regs	*regs = controller->regs;
 	__u32			temp;
 
-	temp = readl (&regs->revision) & 0xff;
+	temp = readl(&regs->revision) & 0xff;
 	if (temp != 0x10)
-		dbg ("spec %d.%d", (temp >> 4), (temp & 0x0f));
+		dbg("spec %d.%d", (temp >> 4), (temp & 0x0f));
 
-	temp = readl (&regs->control);
-	dbg ("control: 0x%08x%s%s%s HCFS=%s%s%s%s%s CBSR=%d", temp,
+	temp = readl(&regs->control);
+	dbg("control: 0x%08x%s%s%s HCFS=%s%s%s%s%s CBSR=%d", temp,
 		(temp & OHCI_CTRL_RWE) ? " RWE" : "",
 		(temp & OHCI_CTRL_RWC) ? " RWC" : "",
 		(temp & OHCI_CTRL_IR) ? " IR" : "",
-		hcfs2string (temp & OHCI_CTRL_HCFS),
+		hcfs2string(temp & OHCI_CTRL_HCFS),
 		(temp & OHCI_CTRL_BLE) ? " BLE" : "",
 		(temp & OHCI_CTRL_CLE) ? " CLE" : "",
 		(temp & OHCI_CTRL_IE) ? " IE" : "",
@@ -312,8 +319,8 @@ static void ohci_dump_status (ohci_t *controller)
 		temp & OHCI_CTRL_CBSR
 		);
 
-	temp = readl (&regs->cmdstatus);
-	dbg ("cmdstatus: 0x%08x SOC=%d%s%s%s%s", temp,
+	temp = readl(&regs->cmdstatus);
+	dbg("cmdstatus: 0x%08x SOC=%d%s%s%s%s", temp,
 		(temp & OHCI_SOC) >> 16,
 		(temp & OHCI_OCR) ? " OCR" : "",
 		(temp & OHCI_BLF) ? " BLF" : "",
@@ -321,31 +328,31 @@ static void ohci_dump_status (ohci_t *controller)
 		(temp & OHCI_HCR) ? " HCR" : ""
 		);
 
-	ohci_dump_intr_mask ("intrstatus", readl (&regs->intrstatus));
-	ohci_dump_intr_mask ("intrenable", readl (&regs->intrenable));
+	ohci_dump_intr_mask("intrstatus", readl(&regs->intrstatus));
+	ohci_dump_intr_mask("intrenable", readl(&regs->intrenable));
 
-	maybe_print_eds ("ed_periodcurrent", readl (&regs->ed_periodcurrent));
+	maybe_print_eds("ed_periodcurrent", readl(&regs->ed_periodcurrent));
 
-	maybe_print_eds ("ed_controlhead", readl (&regs->ed_controlhead));
-	maybe_print_eds ("ed_controlcurrent", readl (&regs->ed_controlcurrent));
+	maybe_print_eds("ed_controlhead", readl(&regs->ed_controlhead));
+	maybe_print_eds("ed_controlcurrent", readl(&regs->ed_controlcurrent));
 
-	maybe_print_eds ("ed_bulkhead", readl (&regs->ed_bulkhead));
-	maybe_print_eds ("ed_bulkcurrent", readl (&regs->ed_bulkcurrent));
+	maybe_print_eds("ed_bulkhead", readl(&regs->ed_bulkhead));
+	maybe_print_eds("ed_bulkcurrent", readl(&regs->ed_bulkcurrent));
 
-	maybe_print_eds ("donehead", readl (&regs->donehead));
+	maybe_print_eds("donehead", readl(&regs->donehead));
 }
 
-static void ohci_dump_roothub (ohci_t *controller, int verbose)
+static void ohci_dump_roothub(ohci_t *controller, int verbose)
 {
 	__u32			temp, ndp, i;
 
-	temp = roothub_a (controller);
+	temp = roothub_a(controller);
 	ndp = (temp & RH_A_NDP);
 #ifdef CONFIG_AT91C_PQFP_UHPBUG
 	ndp = (ndp == 2) ? 1:0;
 #endif
 	if (verbose) {
-		dbg ("roothub.a: %08x POTPGT=%d%s%s%s%s%s NDP=%d", temp,
+		dbg("roothub.a: %08x POTPGT=%d%s%s%s%s%s NDP=%d", temp,
 			((temp & RH_A_POTPGT) >> 24) & 0xff,
 			(temp & RH_A_NOCP) ? " NOCP" : "",
 			(temp & RH_A_OCPM) ? " OCPM" : "",
@@ -354,14 +361,14 @@ static void ohci_dump_roothub (ohci_t *controller, int verbose)
 			(temp & RH_A_PSM) ? " PSM" : "",
 			ndp
 			);
-		temp = roothub_b (controller);
-		dbg ("roothub.b: %08x PPCM=%04x DR=%04x",
+		temp = roothub_b(controller);
+		dbg("roothub.b: %08x PPCM=%04x DR=%04x",
 			temp,
 			(temp & RH_B_PPCM) >> 16,
 			(temp & RH_B_DR)
 			);
-		temp = roothub_status (controller);
-		dbg ("roothub.status: %08x%s%s%s%s%s%s",
+		temp = roothub_status(controller);
+		dbg("roothub.status: %08x%s%s%s%s%s%s",
 			temp,
 			(temp & RH_HS_CRWE) ? " CRWE" : "",
 			(temp & RH_HS_OCIC) ? " OCIC" : "",
@@ -373,8 +380,8 @@ static void ohci_dump_roothub (ohci_t *controller, int verbose)
 	}
 
 	for (i = 0; i < ndp; i++) {
-		temp = roothub_portstatus (controller, i);
-		dbg ("roothub.portstatus [%d] = 0x%08x%s%s%s%s%s%s%s%s%s%s%s%s",
+		temp = roothub_portstatus(controller, i);
+		dbg("roothub.portstatus [%d] = 0x%08x%s%s%s%s%s%s%s%s%s%s%s%s",
 			i,
 			temp,
 			(temp & RH_PS_PRSC) ? " PRSC" : "",
@@ -395,16 +402,16 @@ static void ohci_dump_roothub (ohci_t *controller, int verbose)
 	}
 }
 
-static void ohci_dump (ohci_t *controller, int verbose)
+static void ohci_dump(ohci_t *controller, int verbose)
 {
-	dbg ("OHCI controller usb-%s state", controller->slot_name);
+	dbg("OHCI controller usb-%s state", controller->slot_name);
 
 	/* dumps some of the state we know about */
-	ohci_dump_status (controller);
+	ohci_dump_status(controller);
 	if (verbose)
-		ep_print_int_eds (controller, "hcca");
-	dbg ("hcca frame #%04x", controller->hcca->frame_no);
-	ohci_dump_roothub (controller, 1);
+		ep_print_int_eds(controller, "hcca");
+	dbg("hcca frame #%04x", controller->hcca->frame_no);
+	ohci_dump_roothub(controller, 1);
 }
 #endif /* DEBUG */
 
@@ -417,7 +424,7 @@ static void ohci_dump (ohci_t *controller, int verbose)
 int sohci_submit_job(urb_priv_t *urb, struct devrequest *setup)
 {
 	ohci_t *ohci;
-	ed_t * ed;
+	ed_t *ed;
 	urb_priv_t *purb_priv = urb;
 	int i, size = 0;
 	struct usb_device *dev = urb->dev;
@@ -435,27 +442,29 @@ int sohci_submit_job(urb_priv_t *urb, struct devrequest *setup)
 		return -1;
 	}
 
-	/* we're about to begin a new transaction here so mark the URB unfinished */
+	/* we're about to begin a new transaction here so mark the
+	 * URB unfinished */
 	urb->finished = 0;
 
 	/* every endpoint has a ed, locate and fill it */
-	if (!(ed = ep_add_ed (dev, pipe, interval, 1))) {
+	ed = ep_add_ed(dev, pipe, interval, 1);
+	if (!ed) {
 		err("sohci_submit_job: ENOMEM");
 		return -1;
 	}
 
 	/* for the private part of the URB we need the number of TDs (size) */
-	switch (usb_pipetype (pipe)) {
-		case PIPE_BULK: /* one TD for every 4096 Byte */
-			size = (transfer_len - 1) / 4096 + 1;
-			break;
-		case PIPE_CONTROL: /* 1 TD for setup, 1 for ACK and 1 for every 4096 B */
-			size = (transfer_len == 0)? 2:
-						(transfer_len - 1) / 4096 + 3;
-			break;
-		case PIPE_INTERRUPT: /* 1 TD */
-			size = 1;
-			break;
+	switch (usb_pipetype(pipe)) {
+	case PIPE_BULK: /* one TD for every 4096 Byte */
+		size = (transfer_len - 1) / 4096 + 1;
+		break;
+	case PIPE_CONTROL:/* 1 TD for setup, 1 for ACK and 1 for every 4096 B */
+		size = (transfer_len == 0)? 2:
+					(transfer_len - 1) / 4096 + 3;
+		break;
+	case PIPE_INTERRUPT: /* 1 TD */
+		size = 1;
+		break;
 	}
 
 	ed->purb = urb;
@@ -474,27 +483,28 @@ int sohci_submit_job(urb_priv_t *urb, struct devrequest *setup)
 	/* allocate the TDs */
 	/* note that td[0] was allocated in ep_add_ed */
 	for (i = 0; i < size; i++) {
-		purb_priv->td[i] = td_alloc (dev);
+		purb_priv->td[i] = td_alloc(dev);
 		if (!purb_priv->td[i]) {
 			purb_priv->length = i;
-			urb_free_priv (purb_priv);
+			urb_free_priv(purb_priv);
 			err("sohci_submit_job: ENOMEM");
 			return -1;
 		}
 	}
 
 	if (ed->state == ED_NEW || (ed->state & ED_DEL)) {
-		urb_free_priv (purb_priv);
+		urb_free_priv(purb_priv);
 		err("sohci_submit_job: EINVAL");
 		return -1;
 	}
 
 	/* link the ed into a chain if is not already */
 	if (ed->state != ED_OPER)
-		ep_link (ohci, ed);
+		ep_link(ohci, ed);
 
 	/* fill the TDs and link it to the ed */
-	td_submit_job(dev, pipe, buffer, transfer_len, setup, purb_priv, interval);
+	td_submit_job(dev, pipe, buffer, transfer_len,
+		      setup, purb_priv, interval);
 
 	return 0;
 }
@@ -503,19 +513,19 @@ static inline int sohci_return_job(struct ohci *hc, urb_priv_t *urb)
 {
 	struct ohci_regs *regs = hc->regs;
 
-	switch (usb_pipetype (urb->pipe)) {
+	switch (usb_pipetype(urb->pipe)) {
 	case PIPE_INTERRUPT:
 		/* implicitly requeued */
 		if (urb->dev->irq_handle &&
 				(urb->dev->irq_act_len = urb->actual_length)) {
-			writel (OHCI_INTR_WDH, &regs->intrenable);
-			readl (&regs->intrenable); /* PCI posting flush */
+			writel(OHCI_INTR_WDH, &regs->intrenable);
+			readl(&regs->intrenable); /* PCI posting flush */
 			urb->dev->irq_handle(urb->dev);
-			writel (OHCI_INTR_WDH, &regs->intrdisable);
-			readl (&regs->intrdisable); /* PCI posting flush */
+			writel(OHCI_INTR_WDH, &regs->intrdisable);
+			readl(&regs->intrdisable); /* PCI posting flush */
 		}
 		urb->actual_length = 0;
-		td_submit_job (
+		td_submit_job(
 				urb->dev,
 				urb->pipe,
 				urb->transfer_buffer,
@@ -538,11 +548,11 @@ static inline int sohci_return_job(struct ohci *hc, urb_priv_t *urb)
 #ifdef DEBUG
 /* tell us the current USB frame number */
 
-static int sohci_get_current_frame_number (struct usb_device *usb_dev)
+static int sohci_get_current_frame_number(struct usb_device *usb_dev)
 {
 	ohci_t *ohci = &gohci;
 
-	return m16_swap (ohci->hcca->frame_no);
+	return m16_swap(ohci->hcca->frame_no);
 }
 #endif
 
@@ -555,7 +565,7 @@ static int sohci_get_current_frame_number (struct usb_device *usb_dev)
  * returns the branch and
  * sets the interval to interval = 2^integer (ld (interval)) */
 
-static int ep_int_ballance (ohci_t * ohci, int interval, int load)
+static int ep_int_ballance(ohci_t *ohci, int interval, int load)
 {
 	int i, branch = 0;
 
@@ -577,20 +587,19 @@ static int ep_int_ballance (ohci_t * ohci, int interval, int load)
 
 /*  2^int( ld (inter)) */
 
-static int ep_2_n_interval (int inter)
+static int ep_2_n_interval(int inter)
 {
 	int i;
-	for (i = 0; ((inter >> i) > 1 ) && (i < 5); i++);
+	for (i = 0; ((inter >> i) > 1) && (i < 5); i++);
 	return 1 << i;
 }
 
 /*-------------------------------------------------------------------------*/
 
 /* the int tree is a binary tree
- * in order to process it sequentially the indexes of the branches have to be mapped
- * the mapping reverses the bits of a word of num_bits length */
-
-static int ep_rev (int num_bits, int word)
+ * in order to process it sequentially the indexes of the branches have to
+ * be mapped the mapping reverses the bits of a word of num_bits length */
+static int ep_rev(int num_bits, int word)
 {
 	int i, wout = 0;
 
@@ -605,7 +614,7 @@ static int ep_rev (int num_bits, int word)
 
 /* link an ed into one of the HC chains */
 
-static int ep_link (ohci_t *ohci, ed_t *edi)
+static int ep_link(ohci_t *ohci, ed_t *edi)
 {
 	volatile ed_t *ed = edi;
 	int int_branch;
@@ -613,7 +622,7 @@ static int ep_link (ohci_t *ohci, ed_t *edi)
 	int inter;
 	int interval;
 	int load;
-	__u32 * ed_p;
+	__u32 *ed_p;
 
 	ed->state = ED_OPER;
 	ed->int_interval = 0;
@@ -621,49 +630,54 @@ static int ep_link (ohci_t *ohci, ed_t *edi)
 	switch (ed->type) {
 	case PIPE_CONTROL:
 		ed->hwNextED = 0;
-		if (ohci->ed_controltail == NULL) {
-			writel (ed, &ohci->regs->ed_controlhead);
-		} else {
-			ohci->ed_controltail->hwNextED = m32_swap ((unsigned long)ed);
-		}
+		if (ohci->ed_controltail == NULL)
+			writel(ed, &ohci->regs->ed_controlhead);
+		else
+			ohci->ed_controltail->hwNextED =
+						   m32_swap((unsigned long)ed);
+
 		ed->ed_prev = ohci->ed_controltail;
 		if (!ohci->ed_controltail && !ohci->ed_rm_list[0] &&
 			!ohci->ed_rm_list[1] && !ohci->sleeping) {
 			ohci->hc_control |= OHCI_CTRL_CLE;
-			writel (ohci->hc_control, &ohci->regs->control);
+			writel(ohci->hc_control, &ohci->regs->control);
 		}
 		ohci->ed_controltail = edi;
 		break;
 
 	case PIPE_BULK:
 		ed->hwNextED = 0;
-		if (ohci->ed_bulktail == NULL) {
-			writel (ed, &ohci->regs->ed_bulkhead);
-		} else {
-			ohci->ed_bulktail->hwNextED = m32_swap ((unsigned long)ed);
-		}
+		if (ohci->ed_bulktail == NULL)
+			writel(ed, &ohci->regs->ed_bulkhead);
+		else
+			ohci->ed_bulktail->hwNextED =
+						   m32_swap((unsigned long)ed);
+
 		ed->ed_prev = ohci->ed_bulktail;
 		if (!ohci->ed_bulktail && !ohci->ed_rm_list[0] &&
 			!ohci->ed_rm_list[1] && !ohci->sleeping) {
 			ohci->hc_control |= OHCI_CTRL_BLE;
-			writel (ohci->hc_control, &ohci->regs->control);
+			writel(ohci->hc_control, &ohci->regs->control);
 		}
 		ohci->ed_bulktail = edi;
 		break;
 
 	case PIPE_INTERRUPT:
 		load = ed->int_load;
-		interval = ep_2_n_interval (ed->int_period);
+		interval = ep_2_n_interval(ed->int_period);
 		ed->int_interval = interval;
-		int_branch = ep_int_ballance (ohci, interval, load);
+		int_branch = ep_int_ballance(ohci, interval, load);
 		ed->int_branch = int_branch;
 
-		for (i = 0; i < ep_rev (6, interval); i += inter) {
+		for (i = 0; i < ep_rev(6, interval); i += inter) {
 			inter = 1;
-			for (ed_p = &(ohci->hcca->int_table[ep_rev (5, i) + int_branch]);
-				(*ed_p != 0) && (((ed_t *)ed_p)->int_interval >= interval);
+			for (ed_p = &(ohci->hcca->int_table[\
+						ep_rev(5, i) + int_branch]);
+				(*ed_p != 0) &&
+				(((ed_t *)ed_p)->int_interval >= interval);
 				ed_p = &(((ed_t *)ed_p)->hwNextED))
-					inter = ep_rev (6, ((ed_t *)ed_p)->int_interval);
+					inter = ep_rev(6,
+						 ((ed_t *)ed_p)->int_interval);
 			ed->hwNextED = *ed_p;
 			*ed_p = m32_swap((unsigned long)ed);
 		}
@@ -675,19 +689,21 @@ static int ep_link (ohci_t *ohci, ed_t *edi)
 /*-------------------------------------------------------------------------*/
 
 /* scan the periodic table to find and unlink this ED */
-static void periodic_unlink ( struct ohci *ohci, volatile struct ed *ed,
-		unsigned index, unsigned period)
+static void periodic_unlink(struct ohci *ohci, volatile struct ed *ed,
+			    unsigned index, unsigned period)
 {
 	for (; index < NUM_INTS; index += period) {
 		__u32	*ed_p = &ohci->hcca->int_table [index];
 
 		/* ED might have been unlinked through another path */
 		while (*ed_p != 0) {
-			if (((struct ed *)m32_swap ((unsigned long)ed_p)) == ed) {
+			if (((struct ed *)
+					m32_swap((unsigned long)ed_p)) == ed) {
 				*ed_p = ed->hwNextED;
 				break;
 			}
-			ed_p = & (((struct ed *)m32_swap ((unsigned long)ed_p))->hwNextED);
+			ed_p = &(((struct ed *)
+				     m32_swap((unsigned long)ed_p))->hwNextED);
 		}
 	}
 }
@@ -697,28 +713,30 @@ static void periodic_unlink ( struct ohci *ohci, volatile struct ed *ed,
  * the link from the ed still points to another operational ed or 0
  * so the HC can eventually finish the processing of the unlinked ed */
 
-static int ep_unlink (ohci_t *ohci, ed_t *edi)
+static int ep_unlink(ohci_t *ohci, ed_t *edi)
 {
 	volatile ed_t *ed = edi;
 	int i;
 
-	ed->hwINFO |= m32_swap (OHCI_ED_SKIP);
+	ed->hwINFO |= m32_swap(OHCI_ED_SKIP);
 
 	switch (ed->type) {
 	case PIPE_CONTROL:
 		if (ed->ed_prev == NULL) {
 			if (!ed->hwNextED) {
 				ohci->hc_control &= ~OHCI_CTRL_CLE;
-				writel (ohci->hc_control, &ohci->regs->control);
+				writel(ohci->hc_control, &ohci->regs->control);
 			}
-			writel (m32_swap (*((__u32 *)&ed->hwNextED)), &ohci->regs->ed_controlhead);
+			writel(m32_swap(*((__u32 *)&ed->hwNextED)),
+				&ohci->regs->ed_controlhead);
 		} else {
 			ed->ed_prev->hwNextED = ed->hwNextED;
 		}
 		if (ohci->ed_controltail == ed) {
 			ohci->ed_controltail = ed->ed_prev;
 		} else {
-			((ed_t *)m32_swap (*((__u32 *)&ed->hwNextED)))->ed_prev = ed->ed_prev;
+			((ed_t *)m32_swap(
+			    *((__u32 *)&ed->hwNextED)))->ed_prev = ed->ed_prev;
 		}
 		break;
 
@@ -726,21 +744,23 @@ static int ep_unlink (ohci_t *ohci, ed_t *edi)
 		if (ed->ed_prev == NULL) {
 			if (!ed->hwNextED) {
 				ohci->hc_control &= ~OHCI_CTRL_BLE;
-				writel (ohci->hc_control, &ohci->regs->control);
+				writel(ohci->hc_control, &ohci->regs->control);
 			}
-			writel (m32_swap (*((__u32 *)&ed->hwNextED)), &ohci->regs->ed_bulkhead);
+			writel(m32_swap(*((__u32 *)&ed->hwNextED)),
+			       &ohci->regs->ed_bulkhead);
 		} else {
 			ed->ed_prev->hwNextED = ed->hwNextED;
 		}
 		if (ohci->ed_bulktail == ed) {
 			ohci->ed_bulktail = ed->ed_prev;
 		} else {
-			((ed_t *)m32_swap (*((__u32 *)&ed->hwNextED)))->ed_prev = ed->ed_prev;
+			((ed_t *)m32_swap(
+			     *((__u32 *)&ed->hwNextED)))->ed_prev = ed->ed_prev;
 		}
 		break;
 
 	case PIPE_INTERRUPT:
-		periodic_unlink (ohci, ed, 0, 1);
+		periodic_unlink(ohci, ed, 0, 1);
 		for (i = ed->int_branch; i < 32; i += ed->int_interval)
 		    ohci->ohci_int_load[i] -= ed->int_load;
 		break;
@@ -759,15 +779,15 @@ static int ep_unlink (ohci_t *ohci, ed_t *edi)
  * info fields are setted anyway even though most of them should not
  * change
  */
-static ed_t * ep_add_ed (struct usb_device *usb_dev, unsigned long pipe,
-		int interval, int load)
+static ed_t *ep_add_ed(struct usb_device *usb_dev, unsigned long pipe,
+			int interval, int load)
 {
 	td_t *td;
 	ed_t *ed_ret;
 	volatile ed_t *ed;
 
-	ed = ed_ret = &ohci_dev.ed[(usb_pipeendpoint (pipe) << 1) |
-			(usb_pipecontrol (pipe)? 0: usb_pipeout (pipe))];
+	ed = ed_ret = &ohci_dev.ed[(usb_pipeendpoint(pipe) << 1) |
+			(usb_pipecontrol(pipe)? 0: usb_pipeout(pipe))];
 
 	if ((ed->state & ED_DEL) || (ed->state & ED_URB_DEL)) {
 		err("ep_add_ed: pending delete");
@@ -776,22 +796,22 @@ static ed_t * ep_add_ed (struct usb_device *usb_dev, unsigned long pipe,
 	}
 
 	if (ed->state == ED_NEW) {
-		ed->hwINFO = m32_swap (OHCI_ED_SKIP); /* skip ed */
 		/* dummy td; end of td list for ed */
-		td = td_alloc (usb_dev);
-		ed->hwTailP = m32_swap ((unsigned long)td);
+		td = td_alloc(usb_dev);
+		ed->hwTailP = m32_swap((unsigned long)td);
 		ed->hwHeadP = ed->hwTailP;
 		ed->state = ED_UNLINK;
-		ed->type = usb_pipetype (pipe);
+		ed->type = usb_pipetype(pipe);
 		ohci_dev.ed_cnt++;
 	}
 
-	ed->hwINFO = m32_swap (usb_pipedevice (pipe)
-			| usb_pipeendpoint (pipe) << 7
-			| (usb_pipeisoc (pipe)? 0x8000: 0)
-			| (usb_pipecontrol (pipe)? 0: (usb_pipeout (pipe)? 0x800: 0x1000))
-			| usb_pipeslow (pipe) << 13
-			| usb_maxpacket (usb_dev, pipe) << 16);
+	ed->hwINFO = m32_swap(usb_pipedevice(pipe)
+			| usb_pipeendpoint(pipe) << 7
+			| (usb_pipeisoc(pipe)? 0x8000: 0)
+			| (usb_pipecontrol(pipe)? 0: \
+					   (usb_pipeout(pipe)? 0x800: 0x1000))
+			| usb_pipeslow(pipe) << 13
+			| usb_maxpacket(usb_dev, pipe) << 16);
 
 	if (ed->type == PIPE_INTERRUPT && ed->state == ED_UNLINK) {
 		ed->int_period = interval;
@@ -807,7 +827,7 @@ static ed_t * ep_add_ed (struct usb_device *usb_dev, unsigned long pipe,
 
 /* enqueue next TD for this URB (OHCI spec 5.2.8.2) */
 
-static void td_fill (ohci_t *ohci, unsigned int info,
+static void td_fill(ohci_t *ohci, unsigned int info,
 	void *data, int len,
 	struct usb_device *dev, int index, urb_priv_t *urb_priv)
 {
@@ -825,29 +845,31 @@ static void td_fill (ohci_t *ohci, unsigned int info,
 	td_pt->hwNextTD = 0;
 
 	/* fill the old dummy TD */
-	td = urb_priv->td [index] = (td_t *)(m32_swap (urb_priv->ed->hwTailP) & ~0xf);
+	td = urb_priv->td [index] =
+			     (td_t *)(m32_swap(urb_priv->ed->hwTailP) & ~0xf);
 
 	td->ed = urb_priv->ed;
 	td->next_dl_td = NULL;
 	td->index = index;
 	td->data = (__u32)data;
 #ifdef OHCI_FILL_TRACE
-	if ((usb_pipetype(urb_priv->pipe) == PIPE_BULK) && usb_pipeout(urb_priv->pipe)) {
+	if (usb_pipebulk(urb_priv->pipe) && usb_pipeout(urb_priv->pipe)) {
 		for (i = 0; i < len; i++)
-		printf("td->data[%d] %#2x ",i, ((unsigned char *)td->data)[i]);
+		printf("td->data[%d] %#2x ", i, ((unsigned char *)td->data)[i]);
 		printf("\n");
 	}
 #endif
 	if (!len)
 		data = 0;
 
-	td->hwINFO = m32_swap (info);
-	td->hwCBP = m32_swap ((unsigned long)data);
+	td->hwINFO = m32_swap(info);
+	td->hwCBP = m32_swap((unsigned long)data);
 	if (data)
-		td->hwBE = m32_swap ((unsigned long)(data + len - 1));
+		td->hwBE = m32_swap((unsigned long)(data + len - 1));
 	else
 		td->hwBE = 0;
-	td->hwNextTD = m32_swap ((unsigned long)td_pt);
+
+	td->hwNextTD = m32_swap((unsigned long)td_pt);
 
 	/* append to queue */
 	td->ed->hwTailP = td->hwNextTD;
@@ -857,8 +879,10 @@ static void td_fill (ohci_t *ohci, unsigned int info,
 
 /* prepare all TDs of a transfer */
 
-static void td_submit_job (struct usb_device *dev, unsigned long pipe, void *buffer,
-	int transfer_len, struct devrequest *setup, urb_priv_t *urb, int interval)
+static void td_submit_job(struct usb_device *dev, unsigned long pipe,
+			  void *buffer, int transfer_len,
+			  struct devrequest *setup, urb_priv_t *urb,
+			  int interval)
 {
 	ohci_t *ohci = &gohci;
 	int data_len = transfer_len;
@@ -867,12 +891,14 @@ static void td_submit_job (struct usb_device *dev, unsigned long pipe, void *buf
 	__u32 info = 0;
 	unsigned int toggle = 0;
 
-	/* OHCI handles the DATA-toggles itself, we just use the USB-toggle bits for reseting */
-	if(usb_gettoggle(dev, usb_pipeendpoint(pipe), usb_pipeout(pipe))) {
+	/* OHCI handles the DATA-toggles itself, we just use the USB-toggle
+	 * bits for reseting */
+	if (usb_gettoggle(dev, usb_pipeendpoint(pipe), usb_pipeout(pipe))) {
 		toggle = TD_T_TOGGLE;
 	} else {
 		toggle = TD_T_DATA0;
-		usb_settoggle(dev, usb_pipeendpoint(pipe), usb_pipeout(pipe), 1);
+		usb_settoggle(dev, usb_pipeendpoint(pipe),
+				usb_pipeout(pipe), 1);
 	}
 	urb->td_cnt = 0;
 	if (data_len)
@@ -880,44 +906,58 @@ static void td_submit_job (struct usb_device *dev, unsigned long pipe, void *buf
 	else
 		data = 0;
 
-	switch (usb_pipetype (pipe)) {
+	switch (usb_pipetype(pipe)) {
 	case PIPE_BULK:
-		info = usb_pipeout (pipe)?
+		info = usb_pipeout(pipe)?
 			TD_CC | TD_DP_OUT : TD_CC | TD_DP_IN ;
-		while(data_len > 4096) {
-			td_fill (ohci, info | (cnt? TD_T_TOGGLE:toggle), data, 4096, dev, cnt, urb);
+		while (data_len > 4096) {
+			td_fill(ohci, info | (cnt? TD_T_TOGGLE:toggle),
+				data, 4096, dev, cnt, urb);
 			data += 4096; data_len -= 4096; cnt++;
 		}
-		info = usb_pipeout (pipe)?
+		info = usb_pipeout(pipe)?
 			TD_CC | TD_DP_OUT : TD_CC | TD_R | TD_DP_IN ;
-		td_fill (ohci, info | (cnt? TD_T_TOGGLE:toggle), data, data_len, dev, cnt, urb);
+		td_fill(ohci, info | (cnt? TD_T_TOGGLE:toggle), data,
+			data_len, dev, cnt, urb);
 		cnt++;
 
-		if (!ohci->sleeping)
-			writel (OHCI_BLF, &ohci->regs->cmdstatus); /* start bulk list */
+		if (!ohci->sleeping) {
+			/* start bulk list */
+			writel(OHCI_BLF, &ohci->regs->cmdstatus);
+		}
 		break;
 
 	case PIPE_CONTROL:
+		/* Setup phase */
 		info = TD_CC | TD_DP_SETUP | TD_T_DATA0;
-		td_fill (ohci, info, setup, 8, dev, cnt++, urb);
+		td_fill(ohci, info, setup, 8, dev, cnt++, urb);
+
+		/* Optional Data phase */
 		if (data_len > 0) {
-			info = usb_pipeout (pipe)?
-				TD_CC | TD_R | TD_DP_OUT | TD_T_DATA1 : TD_CC | TD_R | TD_DP_IN | TD_T_DATA1;
+			info = usb_pipeout(pipe)?
+				TD_CC | TD_R | TD_DP_OUT | TD_T_DATA1 :
+				TD_CC | TD_R | TD_DP_IN | TD_T_DATA1;
 			/* NOTE:  mishandles transfers >8K, some >4K */
-			td_fill (ohci, info, data, data_len, dev, cnt++, urb);
+			td_fill(ohci, info, data, data_len, dev, cnt++, urb);
+		}
+
+		/* Status phase */
+		info = usb_pipeout(pipe)?
+			TD_CC | TD_DP_IN | TD_T_DATA1:
+			TD_CC | TD_DP_OUT | TD_T_DATA1;
+		td_fill(ohci, info, data, 0, dev, cnt++, urb);
+
+		if (!ohci->sleeping) {
+			/* start Control list */
+			writel(OHCI_CLF, &ohci->regs->cmdstatus);
 		}
-		info = usb_pipeout (pipe)?
-			TD_CC | TD_DP_IN | TD_T_DATA1: TD_CC | TD_DP_OUT | TD_T_DATA1;
-		td_fill (ohci, info, data, 0, dev, cnt++, urb);
-		if (!ohci->sleeping)
-			writel (OHCI_CLF, &ohci->regs->cmdstatus); /* start Control list */
 		break;
 
 	case PIPE_INTERRUPT:
-		info = usb_pipeout (urb->pipe)?
+		info = usb_pipeout(urb->pipe)?
 			TD_CC | TD_DP_OUT | toggle:
 			TD_CC | TD_R | TD_DP_IN | toggle;
-		td_fill (ohci, info, data, data_len, dev, cnt++, urb);
+		td_fill(ohci, info, data, data_len, dev, cnt++, urb);
 		break;
 	}
 	if (urb->length != cnt)
@@ -930,16 +970,16 @@ static void td_submit_job (struct usb_device *dev, unsigned long pipe, void *buf
 
 /* calculate the transfer length and update the urb */
 
-static void dl_transfer_length(td_t * td)
+static void dl_transfer_length(td_t *td)
 {
 	__u32 tdINFO, tdBE, tdCBP;
 	urb_priv_t *lurb_priv = td->ed->purb;
 
-	tdINFO = m32_swap (td->hwINFO);
-	tdBE   = m32_swap (td->hwBE);
-	tdCBP  = m32_swap (td->hwCBP);
+	tdINFO = m32_swap(td->hwINFO);
+	tdBE   = m32_swap(td->hwBE);
+	tdCBP  = m32_swap(td->hwCBP);
 
-	if (!(usb_pipetype (lurb_priv->pipe) == PIPE_CONTROL &&
+	if (!(usb_pipecontrol(lurb_priv->pipe) &&
 	    ((td->index == 0) || (td->index == lurb_priv->length - 1)))) {
 		if (tdBE != 0) {
 			if (td->hwCBP == 0)
@@ -951,105 +991,127 @@ static void dl_transfer_length(td_t * td)
 }
 
 /*-------------------------------------------------------------------------*/
+static void check_status(td_t *td_list)
+{
+	urb_priv_t *lurb_priv = td_list->ed->purb;
+	int	   urb_len    = lurb_priv->length;
+	__u32      *phwHeadP  = &td_list->ed->hwHeadP;
+	int	   cc;
+
+	cc = TD_CC_GET(m32_swap(td_list->hwINFO));
+	if (cc) {
+		err(" USB-error: %s (%x)", cc_to_string[cc], cc);
+
+		if (*phwHeadP & m32_swap(0x1)) {
+			if (lurb_priv &&
+			    ((td_list->index + 1) < urb_len)) {
+				*phwHeadP =
+					(lurb_priv->td[urb_len - 1]->hwNextTD &\
+							m32_swap(0xfffffff0)) |
+						   (*phwHeadP & m32_swap(0x2));
+
+				lurb_priv->td_cnt += urb_len -
+						     td_list->index - 1;
+			} else
+				*phwHeadP &= m32_swap(0xfffffff2);
+		}
+#ifdef CONFIG_MPC5200
+		td_list->hwNextTD = 0;
+#endif
+	}
+}
 
 /* replies to the request have to be on a FIFO basis so
  * we reverse the reversed done-list */
-
-static td_t * dl_reverse_done_list (ohci_t *ohci)
+static td_t *dl_reverse_done_list(ohci_t *ohci)
 {
 	__u32 td_list_hc;
 	td_t *td_rev = NULL;
 	td_t *td_list = NULL;
-	urb_priv_t *lurb_priv = NULL;
 
-	td_list_hc = m32_swap (ohci->hcca->done_head) & 0xfffffff0;
+	td_list_hc = m32_swap(ohci->hcca->done_head) & 0xfffffff0;
 	ohci->hcca->done_head = 0;
 
 	while (td_list_hc) {
 		td_list = (td_t *)td_list_hc;
-
-		if (TD_CC_GET (m32_swap (td_list->hwINFO))) {
-			lurb_priv = td_list->ed->purb;
-			dbg(" USB-error/status: %x : %p",
-					TD_CC_GET (m32_swap (td_list->hwINFO)), td_list);
-			if (td_list->ed->hwHeadP & m32_swap (0x1)) {
-				if (lurb_priv && ((td_list->index + 1) < lurb_priv->length)) {
-					td_list->ed->hwHeadP =
-						(lurb_priv->td[lurb_priv->length - 1]->hwNextTD & m32_swap (0xfffffff0)) |
-									(td_list->ed->hwHeadP & m32_swap (0x2));
-					lurb_priv->td_cnt += lurb_priv->length - td_list->index - 1;
-				} else
-					td_list->ed->hwHeadP &= m32_swap (0xfffffff2);
-			}
-#ifdef CONFIG_MPC5200
-			td_list->hwNextTD = 0;
-#endif
-		}
-
+		check_status(td_list);
 		td_list->next_dl_td = td_rev;
 		td_rev = td_list;
-		td_list_hc = m32_swap (td_list->hwNextTD) & 0xfffffff0;
+		td_list_hc = m32_swap(td_list->hwNextTD) & 0xfffffff0;
 	}
 	return td_list;
 }
 
 /*-------------------------------------------------------------------------*/
+/*-------------------------------------------------------------------------*/
 
-/* td done list */
-static int dl_done_list (ohci_t *ohci, td_t *td_list)
+static void finish_urb(ohci_t *ohci, urb_priv_t *urb, int status)
+{
+	if ((status & (ED_OPER | ED_UNLINK)) && (urb->state != URB_DEL))
+		urb->finished = sohci_return_job(ohci, urb);
+	else
+		dbg("finish_urb: strange.., ED state %x, \n", status);
+}
+
+/*
+ * Used to take back a TD from the host controller. This would normally be
+ * called from within dl_done_list, however it may be called directly if the
+ * HC no longer sees the TD and it has not appeared on the donelist (after
+ * two frames).  This bug has been observed on ZF Micro systems.
+ */
+static int takeback_td(ohci_t *ohci, td_t *td_list)
 {
-	td_t *td_list_next = NULL;
 	ed_t *ed;
-	int cc = 0;
+	int cc;
 	int stat = 0;
 	/* urb_t *urb; */
 	urb_priv_t *lurb_priv;
 	__u32 tdINFO, edHeadP, edTailP;
 
-	while (td_list) {
-		td_list_next = td_list->next_dl_td;
+	tdINFO = m32_swap(td_list->hwINFO);
 
-		tdINFO = m32_swap (td_list->hwINFO);
+	ed = td_list->ed;
+	lurb_priv = ed->purb;
 
-		ed = td_list->ed;
-		lurb_priv = ed->purb;
+	dl_transfer_length(td_list);
 
-		dl_transfer_length(td_list);
+	lurb_priv->td_cnt++;
 
-		/* error code of transfer */
-		cc = TD_CC_GET (tdINFO);
-		if (cc != 0) {
-			dbg("ConditionCode %#x", cc);
-			stat = cc_to_error[cc];
-		}
+	/* error code of transfer */
+	cc = TD_CC_GET(tdINFO);
+	if (cc) {
+		err("USB-error: %s (%x)", cc_to_string[cc], cc);
+		stat = cc_to_error[cc];
+	}
 
-		/* see if this done list makes for all TD's of current URB,
-		 * and mark the URB finished if so */
-		if (++(lurb_priv->td_cnt) == lurb_priv->length) {
-#if 1
-			if ((ed->state & (ED_OPER | ED_UNLINK)) &&
-			    (lurb_priv->state != URB_DEL))
-#else
-			if ((ed->state & (ED_OPER | ED_UNLINK)))
-#endif
-				lurb_priv->finished = sohci_return_job(ohci,
-						lurb_priv);
-			else
-				dbg("dl_done_list: strange.., ED state %x, ed->state\n");
-		} else
-			dbg("dl_done_list: processing TD %x, len %x\n", lurb_priv->td_cnt,
-				lurb_priv->length);
-		if (ed->state != ED_NEW &&
-			  (usb_pipetype (lurb_priv->pipe) != PIPE_INTERRUPT)) {
-			edHeadP = m32_swap (ed->hwHeadP) & 0xfffffff0;
-			edTailP = m32_swap (ed->hwTailP);
-
-			/* unlink eds if they are not busy */
-			if ((edHeadP == edTailP) && (ed->state == ED_OPER))
-				ep_unlink (ohci, ed);
-		}
+	/* see if this done list makes for all TD's of current URB,
+	* and mark the URB finished if so */
+	if (lurb_priv->td_cnt == lurb_priv->length)
+		finish_urb(ohci, lurb_priv, ed->state);
+
+	dbg("dl_done_list: processing TD %x, len %x\n",
+		lurb_priv->td_cnt, lurb_priv->length);
 
-		td_list = td_list_next;
+	if (ed->state != ED_NEW && (!usb_pipeint(lurb_priv->pipe))) {
+		edHeadP = m32_swap(ed->hwHeadP) & 0xfffffff0;
+		edTailP = m32_swap(ed->hwTailP);
+
+		/* unlink eds if they are not busy */
+		if ((edHeadP == edTailP) && (ed->state == ED_OPER))
+			ep_unlink(ohci, ed);
+	}
+	return stat;
+}
+
+static int dl_done_list(ohci_t *ohci)
+{
+	int stat = 0;
+	td_t	*td_list = dl_reverse_done_list(ohci);
+
+	while (td_list) {
+		td_t	*td_next = td_list->next_dl_td;
+		stat = takeback_td(ohci, td_list);
+		td_list = td_next;
 	}
 	return stat;
 }
@@ -1092,7 +1154,7 @@ static __u8 root_hub_config_des[] =
 	0x01,	    /*	__u8  bConfigurationValue; */
 	0x00,	    /*	__u8  iConfiguration; */
 	0x40,	    /*	__u8  bmAttributes;
-		 Bit 7: Bus-powered, 6: Self-powered, 5 Remote-wakwup, 4..0: resvd */
+	 Bit 7: Bus-powered, 6: Self-powered, 5 Remote-wakwup, 4..0: resvd */
 	0x00,	    /*	__u8  MaxPower; */
 
 	/* interface */
@@ -1162,14 +1224,17 @@ static unsigned char root_hub_str_index1[] =
 
 #define OK(x)			len = (x); break
 #ifdef DEBUG
-#define WR_RH_STAT(x)		{info("WR:status %#8x", (x));writel((x), &gohci.regs->roothub.status);}
-#define WR_RH_PORTSTAT(x)	{info("WR:portstatus[%d] %#8x", wIndex-1, (x));writel((x), &gohci.regs->roothub.portstatus[wIndex-1]);}
+#define WR_RH_STAT(x)		{info("WR:status %#8x", (x)); writel((x), \
+						&gohci.regs->roothub.status); }
+#define WR_RH_PORTSTAT(x)	{info("WR:portstatus[%d] %#8x", wIndex-1, \
+		(x)); writel((x), &gohci.regs->roothub.portstatus[wIndex-1]); }
 #else
 #define WR_RH_STAT(x)		writel((x), &gohci.regs->roothub.status)
-#define WR_RH_PORTSTAT(x)	writel((x), &gohci.regs->roothub.portstatus[wIndex-1])
+#define WR_RH_PORTSTAT(x)	writel((x), \
+				    &gohci.regs->roothub.portstatus[wIndex-1])
 #endif
 #define RD_RH_STAT		roothub_status(&gohci)
-#define RD_RH_PORTSTAT		roothub_portstatus(&gohci,wIndex-1)
+#define RD_RH_PORTSTAT		roothub_portstatus(&gohci, wIndex-1)
 
 /* request to virtual root hub */
 
@@ -1179,13 +1244,13 @@ int rh_check_port_status(ohci_t *controller)
 	int res;
 
 	res = -1;
-	temp = roothub_a (controller);
+	temp = roothub_a(controller);
 	ndp = (temp & RH_A_NDP);
 #ifdef CONFIG_AT91C_PQFP_UHPBUG
 	ndp = (ndp == 2) ? 1:0;
 #endif
 	for (i = 0; i < ndp; i++) {
-		temp = roothub_portstatus (controller, i);
+		temp = roothub_portstatus(controller, i);
 		/* check for a device disconnect */
 		if (((temp & (RH_PS_PESC | RH_PS_CSC)) ==
 			(RH_PS_PESC | RH_PS_CSC)) &&
@@ -1200,7 +1265,7 @@ int rh_check_port_status(ohci_t *controller)
 static int ohci_submit_rh_msg(struct usb_device *dev, unsigned long pipe,
 		void *buffer, int transfer_len, struct devrequest *cmd)
 {
-	void * data = buffer;
+	void *data = buffer;
 	int leni = transfer_len;
 	int len = 0;
 	int stat = 0;
@@ -1212,19 +1277,20 @@ static int ohci_submit_rh_msg(struct usb_device *dev, unsigned long pipe,
 	__u16 wLength;
 
 #ifdef DEBUG
-pkt_print(NULL, dev, pipe, buffer, transfer_len, cmd, "SUB(rh)", usb_pipein(pipe));
+pkt_print(NULL, dev, pipe, buffer, transfer_len,
+	  cmd, "SUB(rh)", usb_pipein(pipe));
 #else
 	wait_ms(1);
 #endif
-	if ((pipe & PIPE_INTERRUPT) == PIPE_INTERRUPT) {
+	if (usb_pipeint(pipe)) {
 		info("Root-Hub submit IRQ: NOT implemented");
 		return 0;
 	}
 
 	bmRType_bReq  = cmd->requesttype | (cmd->request << 8);
-	wValue	      = le16_to_cpu (cmd->value);
-	wIndex	      = le16_to_cpu (cmd->index);
-	wLength	      = le16_to_cpu (cmd->length);
+	wValue	      = le16_to_cpu(cmd->value);
+	wIndex	      = le16_to_cpu(cmd->index);
+	wLength	      = le16_to_cpu(cmd->length);
 
 	info("Root-Hub: adr: %2x cmd(%1x): %08x %04x %04x %04x",
 		dev->devnum, 8, bmRType_bReq, wValue, wIndex, wLength);
@@ -1239,118 +1305,118 @@ pkt_print(NULL, dev, pipe, buffer, transfer_len, cmd, "SUB(rh)", usb_pipein(pipe
 	*/
 
 	case RH_GET_STATUS:
-			*(__u16 *) data_buf = cpu_to_le16 (1); OK (2);
+		*(__u16 *) data_buf = cpu_to_le16(1);
+		OK(2);
 	case RH_GET_STATUS | RH_INTERFACE:
-			*(__u16 *) data_buf = cpu_to_le16 (0); OK (2);
+		*(__u16 *) data_buf = cpu_to_le16(0);
+		OK(2);
 	case RH_GET_STATUS | RH_ENDPOINT:
-			*(__u16 *) data_buf = cpu_to_le16 (0); OK (2);
+		*(__u16 *) data_buf = cpu_to_le16(0);
+		OK(2);
 	case RH_GET_STATUS | RH_CLASS:
-			*(__u32 *) data_buf = cpu_to_le32 (
+		*(__u32 *) data_buf = cpu_to_le32(
 				RD_RH_STAT & ~(RH_HS_CRWE | RH_HS_DRWE));
-			OK (4);
+		OK(4);
 	case RH_GET_STATUS | RH_OTHER | RH_CLASS:
-			*(__u32 *) data_buf = cpu_to_le32 (RD_RH_PORTSTAT); OK (4);
+		*(__u32 *) data_buf = cpu_to_le32(RD_RH_PORTSTAT);
+		OK(4);
 
 	case RH_CLEAR_FEATURE | RH_ENDPOINT:
 		switch (wValue) {
-			case (RH_ENDPOINT_STALL): OK (0);
+		case (RH_ENDPOINT_STALL):
+			OK(0);
 		}
 		break;
 
 	case RH_CLEAR_FEATURE | RH_CLASS:
 		switch (wValue) {
-			case RH_C_HUB_LOCAL_POWER:
-				OK(0);
-			case (RH_C_HUB_OVER_CURRENT):
-					WR_RH_STAT(RH_HS_OCIC); OK (0);
+		case RH_C_HUB_LOCAL_POWER:
+			OK(0);
+		case (RH_C_HUB_OVER_CURRENT):
+			WR_RH_STAT(RH_HS_OCIC);
+			OK(0);
 		}
 		break;
 
 	case RH_CLEAR_FEATURE | RH_OTHER | RH_CLASS:
 		switch (wValue) {
-			case (RH_PORT_ENABLE):
-					WR_RH_PORTSTAT (RH_PS_CCS ); OK (0);
-			case (RH_PORT_SUSPEND):
-					WR_RH_PORTSTAT (RH_PS_POCI); OK (0);
-			case (RH_PORT_POWER):
-					WR_RH_PORTSTAT (RH_PS_LSDA); OK (0);
-			case (RH_C_PORT_CONNECTION):
-					WR_RH_PORTSTAT (RH_PS_CSC ); OK (0);
-			case (RH_C_PORT_ENABLE):
-					WR_RH_PORTSTAT (RH_PS_PESC); OK (0);
-			case (RH_C_PORT_SUSPEND):
-					WR_RH_PORTSTAT (RH_PS_PSSC); OK (0);
-			case (RH_C_PORT_OVER_CURRENT):
-					WR_RH_PORTSTAT (RH_PS_OCIC); OK (0);
-			case (RH_C_PORT_RESET):
-					WR_RH_PORTSTAT (RH_PS_PRSC); OK (0);
+		case (RH_PORT_ENABLE):        WR_RH_PORTSTAT(RH_PS_CCS);  OK(0);
+		case (RH_PORT_SUSPEND):       WR_RH_PORTSTAT(RH_PS_POCI); OK(0);
+		case (RH_PORT_POWER):         WR_RH_PORTSTAT(RH_PS_LSDA); OK(0);
+		case (RH_C_PORT_CONNECTION):  WR_RH_PORTSTAT(RH_PS_CSC);  OK(0);
+		case (RH_C_PORT_ENABLE):      WR_RH_PORTSTAT(RH_PS_PESC); OK(0);
+		case (RH_C_PORT_SUSPEND):     WR_RH_PORTSTAT(RH_PS_PSSC); OK(0);
+		case (RH_C_PORT_OVER_CURRENT):WR_RH_PORTSTAT(RH_PS_OCIC); OK(0);
+		case (RH_C_PORT_RESET):       WR_RH_PORTSTAT(RH_PS_PRSC); OK(0);
 		}
 		break;
 
 	case RH_SET_FEATURE | RH_OTHER | RH_CLASS:
 		switch (wValue) {
-			case (RH_PORT_SUSPEND):
-					WR_RH_PORTSTAT (RH_PS_PSS ); OK (0);
-			case (RH_PORT_RESET): /* BUG IN HUP CODE *********/
-					if (RD_RH_PORTSTAT & RH_PS_CCS)
-					    WR_RH_PORTSTAT (RH_PS_PRS);
-					OK (0);
-			case (RH_PORT_POWER):
-					WR_RH_PORTSTAT (RH_PS_PPS );
-					wait_ms(100);
-					OK (0);
-			case (RH_PORT_ENABLE): /* BUG IN HUP CODE *********/
-					if (RD_RH_PORTSTAT & RH_PS_CCS)
-					    WR_RH_PORTSTAT (RH_PS_PES );
-					OK (0);
+		case (RH_PORT_SUSPEND):
+			WR_RH_PORTSTAT(RH_PS_PSS);  OK(0);
+		case (RH_PORT_RESET): /* BUG IN HUP CODE *********/
+			if (RD_RH_PORTSTAT & RH_PS_CCS)
+				WR_RH_PORTSTAT(RH_PS_PRS);
+			OK(0);
+		case (RH_PORT_POWER):
+			WR_RH_PORTSTAT(RH_PS_PPS);
+			wait_ms(100);
+			OK(0);
+		case (RH_PORT_ENABLE): /* BUG IN HUP CODE *********/
+			if (RD_RH_PORTSTAT & RH_PS_CCS)
+				WR_RH_PORTSTAT(RH_PS_PES);
+			OK(0);
 		}
 		break;
 
-	case RH_SET_ADDRESS: gohci.rh.devnum = wValue; OK(0);
+	case RH_SET_ADDRESS:
+		gohci.rh.devnum = wValue;
+		OK(0);
 
 	case RH_GET_DESCRIPTOR:
 		switch ((wValue & 0xff00) >> 8) {
-			case (0x01): /* device descriptor */
+		case (0x01): /* device descriptor */
+			len = min_t(unsigned int,
+					leni,
+					min_t(unsigned int,
+					sizeof(root_hub_dev_des),
+					wLength));
+			data_buf = root_hub_dev_des; OK(len);
+		case (0x02): /* configuration descriptor */
+			len = min_t(unsigned int,
+					leni,
+					min_t(unsigned int,
+					sizeof(root_hub_config_des),
+					wLength));
+			data_buf = root_hub_config_des; OK(len);
+		case (0x03): /* string descriptors */
+			if (wValue == 0x0300) {
 				len = min_t(unsigned int,
-					  leni,
-					  min_t(unsigned int,
-					      sizeof (root_hub_dev_des),
-					      wLength));
-				data_buf = root_hub_dev_des; OK(len);
-			case (0x02): /* configuration descriptor */
-				len = min_t(unsigned int,
-					  leni,
-					  min_t(unsigned int,
-					      sizeof (root_hub_config_des),
-					      wLength));
-				data_buf = root_hub_config_des; OK(len);
-			case (0x03): /* string descriptors */
-				if(wValue==0x0300) {
-					len = min_t(unsigned int,
-						  leni,
-						  min_t(unsigned int,
-						      sizeof (root_hub_str_index0),
-						      wLength));
-					data_buf = root_hub_str_index0;
-					OK(len);
-				}
-				if(wValue==0x0301) {
-					len = min_t(unsigned int,
-						  leni,
-						  min_t(unsigned int,
-						      sizeof (root_hub_str_index1),
-						      wLength));
-					data_buf = root_hub_str_index1;
-					OK(len);
+						leni,
+						min_t(unsigned int,
+						sizeof(root_hub_str_index0),
+						wLength));
+				data_buf = root_hub_str_index0;
+				OK(len);
 			}
-			default:
-				stat = USB_ST_STALLED;
+			if (wValue == 0x0301) {
+				len = min_t(unsigned int,
+						leni,
+						min_t(unsigned int,
+						sizeof(root_hub_str_index1),
+						wLength));
+				data_buf = root_hub_str_index1;
+				OK(len);
+		}
+		default:
+			stat = USB_ST_STALLED;
 		}
 		break;
 
 	case RH_GET_DESCRIPTOR | RH_CLASS:
 	{
-		__u32 temp = roothub_a (&gohci);
+		__u32 temp = roothub_a(&gohci);
 
 		data_buf [0] = 9;		/* min length; */
 		data_buf [1] = 0x29;
@@ -1363,13 +1429,13 @@ pkt_print(NULL, dev, pipe, buffer, transfer_len, cmd, "SUB(rh)", usb_pipein(pipe
 			data_buf [3] |= 0x1;
 		if (temp & RH_A_NOCP)	/* no overcurrent reporting? */
 			data_buf [3] |= 0x10;
-		else if (temp & RH_A_OCPM)	/* per-port overcurrent reporting? */
+		else if (temp & RH_A_OCPM)/* per-port overcurrent reporting? */
 			data_buf [3] |= 0x8;
 
 		/* corresponds to data_buf[4-7] */
 		datab [1] = 0;
 		data_buf [5] = (temp & RH_A_POTPGT) >> 24;
-		temp = roothub_b (&gohci);
+		temp = roothub_b(&gohci);
 		data_buf [7] = temp & RH_B_DR;
 		if (data_buf [2] < 7) {
 			data_buf [8] = 0xff;
@@ -1381,32 +1447,33 @@ pkt_print(NULL, dev, pipe, buffer, transfer_len, cmd, "SUB(rh)", usb_pipein(pipe
 
 		len = min_t(unsigned int, leni,
 			    min_t(unsigned int, data_buf [0], wLength));
-		OK (len);
+		OK(len);
 	}
 
-	case RH_GET_CONFIGURATION:	*(__u8 *) data_buf = 0x01; OK (1);
+	case RH_GET_CONFIGURATION:	*(__u8 *) data_buf = 0x01; OK(1);
 
-	case RH_SET_CONFIGURATION:	WR_RH_STAT (0x10000); OK (0);
+	case RH_SET_CONFIGURATION:	WR_RH_STAT(0x10000); OK(0);
 
 	default:
-		dbg ("unsupported root hub command");
+		dbg("unsupported root hub command");
 		stat = USB_ST_STALLED;
 	}
 
 #ifdef	DEBUG
-	ohci_dump_roothub (&gohci, 1);
+	ohci_dump_roothub(&gohci, 1);
 #else
 	wait_ms(1);
 #endif
 
 	len = min_t(int, len, leni);
 	if (data != data_buf)
-	    memcpy (data, data_buf, len);
+	    memcpy(data, data_buf, len);
 	dev->act_len = len;
 	dev->status = stat;
 
 #ifdef DEBUG
-	pkt_print(NULL, dev, pipe, buffer, transfer_len, cmd, "RET(rh)", 0/*usb_pipein(pipe)*/);
+	pkt_print(NULL, dev, pipe, buffer,
+		  transfer_len, cmd, "RET(rh)", 0/*usb_pipein(pipe)*/);
 #else
 	wait_ms(1);
 #endif
@@ -1443,7 +1510,8 @@ int submit_common_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
 
 #ifdef DEBUG
 	urb->actual_length = 0;
-	pkt_print(urb, dev, pipe, buffer, transfer_len, setup, "SUB", usb_pipein(pipe));
+	pkt_print(urb, dev, pipe, buffer, transfer_len,
+		  setup, "SUB", usb_pipein(pipe));
 #else
 	wait_ms(1);
 #endif
@@ -1465,7 +1533,7 @@ int submit_common_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
 
 	/* allow more time for a BULK device to react - some are slow */
 #define BULK_TO	 5000	/* timeout in milliseconds */
-	if (usb_pipetype (pipe) == PIPE_BULK)
+	if (usb_pipebulk(pipe))
 		timeout = BULK_TO;
 	else
 		timeout = 100;
@@ -1496,7 +1564,7 @@ int submit_common_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
 		if (--timeout) {
 			wait_ms(1);
 			if (!urb->finished)
-				dbg("\%");
+				dbg("*");
 
 		} else {
 			err("CTL:TIMEOUT ");
@@ -1511,14 +1579,15 @@ int submit_common_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
 	dev->act_len = transfer_len;
 
 #ifdef DEBUG
-	pkt_print(urb, dev, pipe, buffer, transfer_len, setup, "RET(ctlr)", usb_pipein(pipe));
+	pkt_print(urb, dev, pipe, buffer, transfer_len,
+		  setup, "RET(ctlr)", usb_pipein(pipe));
 #else
 	wait_ms(1);
 #endif
 
 	/* free TDs in urb_priv */
-	if (usb_pipetype (pipe) != PIPE_INTERRUPT)
-		urb_free_priv (urb);
+	if (!usb_pipeint(pipe))
+		urb_free_priv(urb);
 	return 0;
 }
 
@@ -1537,7 +1606,8 @@ int submit_control_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
 
 	info("submit_control_msg");
 #ifdef DEBUG
-	pkt_print(NULL, dev, pipe, buffer, transfer_len, setup, "SUB", usb_pipein(pipe));
+	pkt_print(NULL, dev, pipe, buffer, transfer_len,
+		  setup, "SUB", usb_pipein(pipe));
 #else
 	wait_ms(1);
 #endif
@@ -1570,18 +1640,46 @@ int submit_int_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
 
 /* reset the HC and BUS */
 
-static int hc_reset (ohci_t *ohci)
+static int hc_reset(ohci_t *ohci)
 {
+#ifdef CONFIG_PCI_EHCI_DEVNO
+	pci_dev_t pdev;
+#endif
 	int timeout = 30;
 	int smm_timeout = 50; /* 0,5 sec */
 
 	dbg("%s\n", __FUNCTION__);
 
-	if (readl (&ohci->regs->control) & OHCI_CTRL_IR) { /* SMM owns the HC */
-		writel (OHCI_OCR, &ohci->regs->cmdstatus); /* request ownership */
+#ifdef CONFIG_PCI_EHCI_DEVNO
+	/*
+	 *  Some multi-function controllers (e.g. ISP1562) allow root hub
+	 * resetting via EHCI registers only.
+	 */
+	pdev = pci_find_devices(ehci_pci_ids, CONFIG_PCI_EHCI_DEVNO);
+	if (pdev != -1) {
+		u32 base;
+		int timeout = 1000;
+
+		pci_read_config_dword(pdev, PCI_BASE_ADDRESS_0, &base);
+		writel(readl(base + EHCI_USBCMD_OFF) | EHCI_USBCMD_HCRESET,
+			base + EHCI_USBCMD_OFF);
+
+		while (readl(base + EHCI_USBCMD_OFF) & EHCI_USBCMD_HCRESET) {
+			if (timeout-- <= 0) {
+				printf("USB RootHub reset timed out!");
+				break;
+			}
+			udelay(1);
+		}
+	} else
+		printf("No EHCI func at %d index!\n", CONFIG_PCI_EHCI_DEVNO);
+#endif
+	if (readl(&ohci->regs->control) & OHCI_CTRL_IR) {
+		/* SMM owns the HC */
+		writel(OHCI_OCR, &ohci->regs->cmdstatus);/* request ownership */
 		info("USB HC TakeOver from SMM");
-		while (readl (&ohci->regs->control) & OHCI_CTRL_IR) {
-			wait_ms (10);
+		while (readl(&ohci->regs->control) & OHCI_CTRL_IR) {
+			wait_ms(10);
 			if (--smm_timeout == 0) {
 				err("USB HC TakeOver failed!");
 				return -1;
@@ -1590,7 +1688,7 @@ static int hc_reset (ohci_t *ohci)
 	}
 
 	/* Disable HC interrupts */
-	writel (OHCI_INTR_MIE, &ohci->regs->intrdisable);
+	writel(OHCI_INTR_MIE, &ohci->regs->intrdisable);
 
 	dbg("USB HC reset_hc usb-%s: ctrl = 0x%X ;\n",
 		ohci->slot_name,
@@ -1598,16 +1696,16 @@ static int hc_reset (ohci_t *ohci)
 
 	/* Reset USB (needed by some controllers) */
 	ohci->hc_control = 0;
-	writel (ohci->hc_control, &ohci->regs->control);
+	writel(ohci->hc_control, &ohci->regs->control);
 
 	/* HC Reset requires max 10 us delay */
-	writel (OHCI_HCR,  &ohci->regs->cmdstatus);
-	while ((readl (&ohci->regs->cmdstatus) & OHCI_HCR) != 0) {
+	writel(OHCI_HCR,  &ohci->regs->cmdstatus);
+	while ((readl(&ohci->regs->cmdstatus) & OHCI_HCR) != 0) {
 		if (--timeout == 0) {
 			err("USB HC reset timed out!");
 			return -1;
 		}
-		udelay (1);
+		udelay(1);
 	}
 	return 0;
 }
@@ -1618,7 +1716,7 @@ static int hc_reset (ohci_t *ohci)
  * enable interrupts
  * connect the virtual root hub */
 
-static int hc_start (ohci_t * ohci)
+static int hc_start(ohci_t *ohci)
 {
 	__u32 mask;
 	unsigned int fminterval;
@@ -1628,44 +1726,44 @@ static int hc_start (ohci_t * ohci)
 	/* Tell the controller where the control and bulk lists are
 	 * The lists are empty now. */
 
-	writel (0, &ohci->regs->ed_controlhead);
-	writel (0, &ohci->regs->ed_bulkhead);
+	writel(0, &ohci->regs->ed_controlhead);
+	writel(0, &ohci->regs->ed_bulkhead);
 
-	writel ((__u32)ohci->hcca, &ohci->regs->hcca); /* a reset clears this */
+	writel((__u32)ohci->hcca, &ohci->regs->hcca); /* a reset clears this */
 
 	fminterval = 0x2edf;
-	writel ((fminterval * 9) / 10, &ohci->regs->periodicstart);
+	writel((fminterval * 9) / 10, &ohci->regs->periodicstart);
 	fminterval |= ((((fminterval - 210) * 6) / 7) << 16);
-	writel (fminterval, &ohci->regs->fminterval);
-	writel (0x628, &ohci->regs->lsthresh);
+	writel(fminterval, &ohci->regs->fminterval);
+	writel(0x628, &ohci->regs->lsthresh);
 
 	/* start controller operations */
 	ohci->hc_control = OHCI_CONTROL_INIT | OHCI_USB_OPER;
 	ohci->disabled = 0;
-	writel (ohci->hc_control, &ohci->regs->control);
+	writel(ohci->hc_control, &ohci->regs->control);
 
 	/* disable all interrupts */
 	mask = (OHCI_INTR_SO | OHCI_INTR_WDH | OHCI_INTR_SF | OHCI_INTR_RD |
 			OHCI_INTR_UE | OHCI_INTR_FNO | OHCI_INTR_RHSC |
 			OHCI_INTR_OC | OHCI_INTR_MIE);
-	writel (mask, &ohci->regs->intrdisable);
+	writel(mask, &ohci->regs->intrdisable);
 	/* clear all interrupts */
 	mask &= ~OHCI_INTR_MIE;
-	writel (mask, &ohci->regs->intrstatus);
+	writel(mask, &ohci->regs->intrstatus);
 	/* Choose the interrupts we care about now  - but w/o MIE */
 	mask = OHCI_INTR_RHSC | OHCI_INTR_UE | OHCI_INTR_WDH | OHCI_INTR_SO;
-	writel (mask, &ohci->regs->intrenable);
+	writel(mask, &ohci->regs->intrenable);
 
 #ifdef	OHCI_USE_NPS
 	/* required for AMD-756 and some Mac platforms */
-	writel ((roothub_a (ohci) | RH_A_NPS) & ~RH_A_PSM,
+	writel((roothub_a(ohci) | RH_A_NPS) & ~RH_A_PSM,
 		&ohci->regs->roothub.a);
-	writel (RH_HS_LPSC, &ohci->regs->roothub.status);
+	writel(RH_HS_LPSC, &ohci->regs->roothub.status);
 #endif	/* OHCI_USE_NPS */
 
-#define mdelay(n) ({unsigned long msec=(n); while (msec--) udelay(1000);})
+#define mdelay(n) ({unsigned long msec = (n); while (msec--) udelay(1000); })
 	/* POTPGT delay is bits 24-31, in 2 ms units. */
-	mdelay ((roothub_a (ohci) >> 23) & 0x1fe);
+	mdelay((roothub_a(ohci) >> 23) & 0x1fe);
 
 	/* connect the virtual root hub */
 	ohci->rh.devnum = 0;
@@ -1683,7 +1781,7 @@ void usb_event_poll(void)
 
 /* an interrupt happens */
 
-static int hc_interrupt (void)
+static int hc_interrupt(void)
 {
 	ohci_t *ohci = &gohci;
 	struct ohci_regs *regs = ohci->regs;
@@ -1691,69 +1789,74 @@ static int hc_interrupt (void)
 	int stat = -1;
 
 	if ((ohci->hcca->done_head != 0) &&
-	    !(m32_swap (ohci->hcca->done_head) & 0x01)) {
+				!(m32_swap(ohci->hcca->done_head) & 0x01)) {
 		ints =  OHCI_INTR_WDH;
-	} else if ((ints = readl (&regs->intrstatus)) == ~(u32)0) {
-		ohci->disabled++;
-		err ("%s device removed!", ohci->slot_name);
-		return -1;
-	} else if ((ints &= readl (&regs->intrenable)) == 0) {
-		dbg("hc_interrupt: returning..\n");
-		return 0xff;
+	} else {
+		ints = readl(&regs->intrstatus);
+		if (ints == ~(u32)0) {
+			ohci->disabled++;
+			err("%s device removed!", ohci->slot_name);
+			return -1;
+		} else {
+			ints &= readl(&regs->intrenable);
+			if (ints == 0) {
+				dbg("hc_interrupt: returning..\n");
+				return 0xff;
+			}
+		}
 	}
 
-	/* dbg("Interrupt: %x frame: %x", ints, le16_to_cpu (ohci->hcca->frame_no)); */
+	/* dbg("Interrupt: %x frame: %x", ints,
+					le16_to_cpu(ohci->hcca->frame_no)); */
 
-	if (ints & OHCI_INTR_RHSC) {
-		got_rhsc = 1;
+	if (ints & OHCI_INTR_RHSC)
 		stat = 0xff;
-	}
 
 	if (ints & OHCI_INTR_UE) {
 		ohci->disabled++;
-		err ("OHCI Unrecoverable Error, controller usb-%s disabled",
+		err("OHCI Unrecoverable Error, controller usb-%s disabled",
 			ohci->slot_name);
 		/* e.g. due to PCI Master/Target Abort */
 
 #ifdef	DEBUG
-		ohci_dump (ohci, 1);
+		ohci_dump(ohci, 1);
 #else
-	wait_ms(1);
+		wait_ms(1);
 #endif
 		/* FIXME: be optimistic, hope that bug won't repeat often. */
 		/* Make some non-interrupt context restart the controller. */
 		/* Count and limit the retries though; either hardware or */
 		/* software errors can go forever... */
-		hc_reset (ohci);
+		hc_reset(ohci);
 		return -1;
 	}
 
 	if (ints & OHCI_INTR_WDH) {
 		wait_ms(1);
-		writel (OHCI_INTR_WDH, &regs->intrdisable);
-		(void)readl (&regs->intrdisable); /* flush */
-		stat = dl_done_list (&gohci, dl_reverse_done_list (&gohci));
-		writel (OHCI_INTR_WDH, &regs->intrenable);
-		(void)readl (&regs->intrdisable); /* flush */
+		writel(OHCI_INTR_WDH, &regs->intrdisable);
+		(void)readl(&regs->intrdisable); /* flush */
+		stat = dl_done_list(&gohci);
+		writel(OHCI_INTR_WDH, &regs->intrenable);
+		(void)readl(&regs->intrdisable); /* flush */
 	}
 
 	if (ints & OHCI_INTR_SO) {
 		dbg("USB Schedule overrun\n");
-		writel (OHCI_INTR_SO, &regs->intrenable);
+		writel(OHCI_INTR_SO, &regs->intrenable);
 		stat = -1;
 	}
 
 	/* FIXME:  this assumes SOF (1/ms) interrupts don't get lost... */
 	if (ints & OHCI_INTR_SF) {
-		unsigned int frame = m16_swap (ohci->hcca->frame_no) & 1;
+		unsigned int frame = m16_swap(ohci->hcca->frame_no) & 1;
 		wait_ms(1);
-		writel (OHCI_INTR_SF, &regs->intrdisable);
+		writel(OHCI_INTR_SF, &regs->intrdisable);
 		if (ohci->ed_rm_list[frame] != NULL)
-			writel (OHCI_INTR_SF, &regs->intrenable);
+			writel(OHCI_INTR_SF, &regs->intrenable);
 		stat = 0xff;
 	}
 
-	writel (ints, &regs->intrstatus);
+	writel(ints, &regs->intrstatus);
 	return stat;
 }
 
@@ -1763,12 +1866,12 @@ static int hc_interrupt (void)
 
 /* De-allocate all resources.. */
 
-static void hc_release_ohci (ohci_t *ohci)
+static void hc_release_ohci(ohci_t *ohci)
 {
-	dbg ("USB HC release ohci usb-%s", ohci->slot_name);
+	dbg("USB HC release ohci usb-%s", ohci->slot_name);
 
 	if (!ohci->disabled)
-		hc_reset (ohci);
+		hc_reset(ohci);
 }
 
 /*-------------------------------------------------------------------------*/
@@ -1784,18 +1887,18 @@ int usb_lowlevel_init(void)
 	pci_dev_t pdev;
 #endif
 
-#ifdef CFG_USB_OHCI_CPU_INIT
+#ifdef CONFIG_SYS_USB_OHCI_CPU_INIT
 	/* cpu dependant init */
-	if(usb_cpu_init())
+	if (usb_cpu_init())
 		return -1;
 #endif
 
-#ifdef CFG_USB_OHCI_BOARD_INIT
+#ifdef CONFIG_SYS_USB_OHCI_BOARD_INIT
 	/*  board dependant init */
-	if(usb_board_init())
+	if (usb_board_init())
 		return -1;
 #endif
-	memset (&gohci, 0, sizeof (ohci_t));
+	memset(&gohci, 0, sizeof(ohci_t));
 
 	/* align the storage */
 	if ((__u32)&ghcca[0] & 0xff) {
@@ -1816,7 +1919,7 @@ int usb_lowlevel_init(void)
 	}
 	ptd = gtd;
 	gohci.hcca = phcca;
-	memset (phcca, 0, sizeof (struct ohci_hcca));
+	memset(phcca, 0, sizeof(struct ohci_hcca));
 
 	gohci.disabled = 1;
 	gohci.sleeping = 0;
@@ -1838,40 +1941,37 @@ int usb_lowlevel_init(void)
 	} else
 		return -1;
 #else
-	gohci.regs = (struct ohci_regs *)CFG_USB_OHCI_REGS_BASE;
+	gohci.regs = (struct ohci_regs *)CONFIG_SYS_USB_OHCI_REGS_BASE;
 #endif
 
 	gohci.flags = 0;
-	gohci.slot_name = CFG_USB_OHCI_SLOT_NAME;
+	gohci.slot_name = CONFIG_SYS_USB_OHCI_SLOT_NAME;
 
 	if (hc_reset (&gohci) < 0) {
 		hc_release_ohci (&gohci);
 		err ("can't reset usb-%s", gohci.slot_name);
-#ifdef CFG_USB_OHCI_BOARD_INIT
+#ifdef CONFIG_SYS_USB_OHCI_BOARD_INIT
 		/* board dependant cleanup */
 		usb_board_init_fail();
 #endif
 
-#ifdef CFG_USB_OHCI_CPU_INIT
+#ifdef CONFIG_SYS_USB_OHCI_CPU_INIT
 		/* cpu dependant cleanup */
 		usb_cpu_init_fail();
 #endif
 		return -1;
 	}
 
-	/* FIXME this is a second HC reset; why?? */
-	/* writel(gohci.hc_control = OHCI_USB_RESET, &gohci.regs->control);
-	   wait_ms(10); */
-	if (hc_start (&gohci) < 0) {
-		err ("can't start usb-%s", gohci.slot_name);
-		hc_release_ohci (&gohci);
+	if (hc_start(&gohci) < 0) {
+		err("can't start usb-%s", gohci.slot_name);
+		hc_release_ohci(&gohci);
 		/* Initialization failed */
-#ifdef CFG_USB_OHCI_BOARD_INIT
+#ifdef CONFIG_SYS_USB_OHCI_BOARD_INIT
 		/* board dependant cleanup */
 		usb_board_stop();
 #endif
 
-#ifdef CFG_USB_OHCI_CPU_INIT
+#ifdef CONFIG_SYS_USB_OHCI_CPU_INIT
 		/* cpu dependant cleanup */
 		usb_cpu_stop();
 #endif
@@ -1879,7 +1979,7 @@ int usb_lowlevel_init(void)
 	}
 
 #ifdef	DEBUG
-	ohci_dump (&gohci, 1);
+	ohci_dump(&gohci, 1);
 #else
 	wait_ms(1);
 #endif
@@ -1895,20 +1995,21 @@ int usb_lowlevel_stop(void)
 		return 0;
 	/* TODO release any interrupts, etc. */
 	/* call hc_release_ohci() here ? */
-	hc_reset (&gohci);
+	hc_reset(&gohci);
 
-#ifdef CFG_USB_OHCI_BOARD_INIT
+#ifdef CONFIG_SYS_USB_OHCI_BOARD_INIT
 	/* board dependant cleanup */
-	if(usb_board_stop())
+	if (usb_board_stop())
 		return -1;
 #endif
 
-#ifdef CFG_USB_OHCI_CPU_INIT
+#ifdef CONFIG_SYS_USB_OHCI_CPU_INIT
 	/* cpu dependant cleanup */
-	if(usb_cpu_stop())
+	if (usb_cpu_stop())
 		return -1;
 #endif
-
+	/* This driver is no longer initialised. It needs a new low-level
+	 * init (board/cpu) before it can be used again. */
+	ohci_inited = 0;
 	return 0;
 }
-#endif /* CONFIG_USB_OHCI_NEW */
diff --git a/drivers/usb/usb_ohci.h b/drivers/usb/usb_ohci.h
index 380cb4c92..a547337e7 100644
--- a/drivers/usb/usb_ohci.h
+++ b/drivers/usb/usb_ohci.h
@@ -38,6 +38,41 @@ static int cc_to_error[16] = {
 	/* Not Access */	       -1
 };
 
+static const char *cc_to_string[16] = {
+	"No Error",
+	"CRC: Last data packet from endpoint contained a CRC error.",
+	"BITSTUFFING: Last data packet from endpoint contained a bit " \
+		     "stuffing violation",
+	"DATATOGGLEMISMATCH: Last packet from endpoint had data toggle PID\n" \
+		     "that did not match the expected value.",
+	"STALL: TD was moved to the Done Queue because the endpoint returned" \
+		     " a STALL PID",
+	"DEVICENOTRESPONDING: Device did not respond to token (IN) or did\n" \
+		     "not provide a handshake (OUT)",
+	"PIDCHECKFAILURE: Check bits on PID from endpoint failed on data PID\n"\
+		     "(IN) or handshake (OUT)",
+	"UNEXPECTEDPID: Receive PID was not valid when encountered or PID\n" \
+		     "value is not defined.",
+	"DATAOVERRUN: The amount of data returned by the endpoint exceeded\n" \
+		     "either the size of the maximum data packet allowed\n" \
+		     "from the endpoint (found in MaximumPacketSize field\n" \
+		     "of ED) or the remaining buffer size.",
+	"DATAUNDERRUN: The endpoint returned less than MaximumPacketSize\n" \
+		     "and that amount was not sufficient to fill the\n" \
+		     "specified buffer",
+	"reserved1",
+	"reserved2",
+	"BUFFEROVERRUN: During an IN, HC received data from endpoint faster\n" \
+		     "than it could be written to system memory",
+	"BUFFERUNDERRUN: During an OUT, HC could not retrieve data from\n" \
+		     "system memory fast enough to keep up with data USB " \
+		     "data rate.",
+	"NOT ACCESSED: This code is set by software before the TD is placed" \
+		     "on a list to be processed by the HC.(1)",
+	"NOT ACCESSED: This code is set by software before the TD is placed" \
+		     "on a list to be processed by the HC.(2)",
+};
+
 /* ED States */
 
 #define ED_NEW		0x00
@@ -155,8 +190,8 @@ struct ohci_hcca {
 /*
  * Maximum number of root hub ports.
  */
-#ifndef CFG_USB_OHCI_MAX_ROOT_PORTS
-# error "CFG_USB_OHCI_MAX_ROOT_PORTS undefined!"
+#ifndef CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS
+# error "CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS undefined!"
 #endif
 
 /*
@@ -191,10 +226,13 @@ struct ohci_regs {
 		__u32	a;
 		__u32	b;
 		__u32	status;
-		__u32	portstatus[CFG_USB_OHCI_MAX_ROOT_PORTS];
+		__u32	portstatus[CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS];
 	} roothub;
 } __attribute((aligned(32)));
 
+/* Some EHCI controls */
+#define EHCI_USBCMD_OFF		0x20
+#define EHCI_USBCMD_HCRESET	(1 << 1)
 
 /* OHCI CONTROL AND STATUS REGISTER MASKS */
 
diff --git a/drivers/usb/usbdcore_ep0.c b/drivers/usb/usbdcore_ep0.c
index cf3f3826c..f6e017df1 100644
--- a/drivers/usb/usbdcore_ep0.c
+++ b/drivers/usb/usbdcore_ep0.c
@@ -51,8 +51,6 @@
  */
 
 #include <common.h>
-
-#if defined(CONFIG_USB_DEVICE)
 #include "usbdcore.h"
 
 #if 0
@@ -597,5 +595,3 @@ int ep0_recv_setup (struct urb *urb)
 	}
 	return -1;
 }
-
-#endif
diff --git a/drivers/usb/usbdcore_mpc8xx.c b/drivers/usb/usbdcore_mpc8xx.c
index 122793c02..0e311ada1 100644
--- a/drivers/usb/usbdcore_mpc8xx.c
+++ b/drivers/usb/usbdcore_mpc8xx.c
@@ -58,8 +58,6 @@
  */
 #include <common.h>
 #include <config.h>
-
-#if defined(CONFIG_MPC885_FAMILY) && defined(CONFIG_USB_DEVICE)
 #include <commproc.h>
 #include "usbdcore.h"
 #include "usbdcore_mpc8xx.h"
@@ -133,7 +131,7 @@ static void mpc8xx_udc_advance_rx (volatile cbd_t ** rx_cbdp, int epid);
 int udc_init (void)
 {
 	/* Init various pointers */
-	immr = (immap_t *) CFG_IMMR;
+	immr = (immap_t *) CONFIG_SYS_IMMR;
 	cp = (cpm8xx_t *) & (immr->im_cpm);
 	usb_paramp = (usb_pram_t *) & (cp->cp_dparam[PROFF_USB]);
 	usbp = (usb_t *) & (cp->cp_scc[0]);
@@ -752,7 +750,7 @@ static short mpc8xx_udc_handle_txerr ()
 static void mpc8xx_udc_advance_rx (volatile cbd_t ** rx_cbdp, int epid)
 {
 	if ((*rx_cbdp)->cbd_sc & RX_BD_W) {
-		*rx_cbdp = (volatile cbd_t *) (endpoints[epid]->rbase + CFG_IMMR);
+		*rx_cbdp = (volatile cbd_t *) (endpoints[epid]->rbase + CONFIG_SYS_IMMR);
 
 	} else {
 		(*rx_cbdp)++;
@@ -780,7 +778,7 @@ static void mpc8xx_udc_flush_tx_fifo (int epid)
 	usbp->uscom = 0x40 | 0;
 
 	/* reset ring */
-	tx_cbdp = (cbd_t *) (endpoints[epid]->tbptr + CFG_IMMR);
+	tx_cbdp = (cbd_t *) (endpoints[epid]->tbptr + CONFIG_SYS_IMMR);
 	tx_cbdp->cbd_sc = (TX_BD_I | TX_BD_W);
 
 
@@ -886,7 +884,7 @@ static int mpc8xx_udc_ep_tx (struct usb_endpoint_instance *epi)
 	}
 
 	ep = epi->endpoint_address & 0x03;
-	tx_cbdp = (cbd_t *) (endpoints[ep]->tbptr + CFG_IMMR);
+	tx_cbdp = (cbd_t *) (endpoints[ep]->tbptr + CONFIG_SYS_IMMR);
 
 	if (tx_cbdp->cbd_sc & TX_BD_R || usbp->usber & USB_E_TXB) {
 		mpc8xx_udc_flush_tx_fifo (ep);
@@ -903,7 +901,7 @@ static int mpc8xx_udc_ep_tx (struct usb_endpoint_instance *epi)
 			return -1;
 		}
 
-		tx_cbdp = (cbd_t *) (endpoints[ep]->tbptr + CFG_IMMR);
+		tx_cbdp = (cbd_t *) (endpoints[ep]->tbptr + CONFIG_SYS_IMMR);
 		while (tx_cbdp->cbd_sc & TX_BD_R) {
 		};
 		tx_cbdp->cbd_sc = (tx_cbdp->cbd_sc & TX_BD_W);
@@ -1187,10 +1185,10 @@ static void mpc8xx_udc_clock_init (volatile immap_t * immr,
 				   volatile cpm8xx_t * cp)
 {
 
-#if defined(CFG_USB_EXTC_CLK)
+#if defined(CONFIG_SYS_USB_EXTC_CLK)
 
 	/* This has been tested with a 48MHz crystal on CLK6 */
-	switch (CFG_USB_EXTC_CLK) {
+	switch (CONFIG_SYS_USB_EXTC_CLK) {
 	case 1:
 		immr->im_ioport.iop_papar |= 0x0100;
 		immr->im_ioport.iop_padir &= ~0x0100;
@@ -1216,7 +1214,7 @@ static void mpc8xx_udc_clock_init (volatile immap_t * immr,
 		break;
 	}
 
-#elif defined(CFG_USB_BRGCLK)
+#elif defined(CONFIG_SYS_USB_BRGCLK)
 
 	/* This has been tested with brgclk == 50MHz */
 	int divisor = 0;
@@ -1227,13 +1225,13 @@ static void mpc8xx_udc_clock_init (volatile immap_t * immr,
 		return;
 	}
 
-	/* Assume the brgclk is 'good enough', we want !(gd->cpu_clk%48Mhz)
+	/* Assume the brgclk is 'good enough', we want !(gd->cpu_clk%48MHz)
 	 * but, can /probably/ live with close-ish alternative rates.
 	 */
 	divisor = (gd->cpu_clk / 48000000L) - 1;
 	cp->cp_sicr &= ~0x0000003F;
 
-	switch (CFG_USB_BRGCLK) {
+	switch (CONFIG_SYS_USB_BRGCLK) {
 	case 1:
 		cp->cp_brgc1 |= (divisor | CPM_BRG_EN);
 		cp->cp_sicr &= ~0x2F;
@@ -1256,7 +1254,7 @@ static void mpc8xx_udc_clock_init (volatile immap_t * immr,
 	}
 
 #else
-#error "CFG_USB_EXTC_CLK or CFG_USB_BRGCLK must be defined"
+#error "CONFIG_SYS_USB_EXTC_CLK or CONFIG_SYS_USB_BRGCLK must be defined"
 #endif
 
 }
@@ -1398,5 +1396,3 @@ static u32 mpc8xx_udc_alloc (u32 data_size, u32 alignment)
 
 	return retaddr;
 }
-
-#endif /* CONFIG_MPC885_FAMILY && CONFIG_USB_DEVICE) */
diff --git a/drivers/usb/usbdcore_omap1510.c b/drivers/usb/usbdcore_omap1510.c
index 4e3239f58..6b7b61b32 100644
--- a/drivers/usb/usbdcore_omap1510.c
+++ b/drivers/usb/usbdcore_omap1510.c
@@ -27,9 +27,6 @@
  */
 
 #include <common.h>
-
-#if ((defined(CONFIG_OMAP1510) || defined(CONFIG_OMAP1610)) && defined(CONFIG_USB_DEVICE))
-
 #include <asm/io.h>
 #ifdef CONFIG_OMAP_SX1
 #include <i2c.h>
@@ -1064,7 +1061,7 @@ void omap1510_udc_noniso_irq (void)
  */
 
 /* Called to start packet transmission. */
-void udc_endpoint_write (struct usb_endpoint_instance *endpoint)
+int udc_endpoint_write (struct usb_endpoint_instance *endpoint)
 {
 	unsigned short epnum =
 		endpoint->endpoint_address & USB_ENDPOINT_NUMBER_MASK;
@@ -1081,6 +1078,8 @@ void udc_endpoint_write (struct usb_endpoint_instance *endpoint)
 		/* deselect the endpoint FIFO */
 		outw (UDC_EP_Dir | epnum, UDC_EP_NUM);
 	}
+
+	return 0;
 }
 
 /* Start to initialize h/w stuff */
@@ -1566,4 +1565,3 @@ void udc_unset_nak (int epid)
 {
 	/* TODO: implement this functionality in omap1510 */
 }
-#endif
diff --git a/drivers/video/ati_radeon_fb.c b/drivers/video/ati_radeon_fb.c
index 650380b2c..9ebb0b0c9 100644
--- a/drivers/video/ati_radeon_fb.c
+++ b/drivers/video/ati_radeon_fb.c
@@ -653,7 +653,7 @@ void *video_hw_init(void)
 
 	tmp = 0;
 
-	videomode = CFG_DEFAULT_VIDEO_MODE;
+	videomode = CONFIG_SYS_DEFAULT_VIDEO_MODE;
 	/* get video mode via environment */
 	if ((penv = getenv ("videomode")) != NULL) {
 		/* deceide if it is a string */
@@ -672,7 +672,7 @@ void *video_hw_init(void)
 				break;
 		}
 		if (i == VESA_MODES_COUNT) {
-			printf ("no VESA Mode found, switching to mode 0x%x ", CFG_DEFAULT_VIDEO_MODE);
+			printf ("no VESA Mode found, switching to mode 0x%x ", CONFIG_SYS_DEFAULT_VIDEO_MODE);
 			i = 0;
 		}
 		res_mode = (struct ctfb_res_modes *) &res_mode_init[vesa_modes[i].resindex];
@@ -732,7 +732,7 @@ void *video_hw_init(void)
 		break;
 	}
 
-	pGD->isaBase = CFG_ISA_IO_BASE_ADDRESS;
+	pGD->isaBase = CONFIG_SYS_ISA_IO_BASE_ADDRESS;
 	pGD->pciBase = rinfo->fb_base_phys;
 	pGD->frameAdrs = rinfo->fb_base_phys;
 	pGD->memSize = 64 * 1024 * 1024;
diff --git a/drivers/video/atmel_lcdfb.c b/drivers/video/atmel_lcdfb.c
index b332a825e..3a51cc7c5 100644
--- a/drivers/video/atmel_lcdfb.c
+++ b/drivers/video/atmel_lcdfb.c
@@ -24,7 +24,6 @@
 
 #include <common.h>
 #include <asm/io.h>
-#include <asm/arch/hardware.h>
 #include <asm/arch/gpio.h>
 #include <asm/arch/clk.h>
 #include <lcd.h>
@@ -108,10 +107,7 @@ void lcd_ctrl_init(void *lcdbase)
 	if (panel_info.vl_tft)
 		value |= ATMEL_LCDC_DISTYPE_TFT;
 
-	if (!(panel_info.vl_sync & ATMEL_LCDC_INVLINE_INVERTED))
-		value |= ATMEL_LCDC_INVLINE_INVERTED;
-	if (!(panel_info.vl_sync & ATMEL_LCDC_INVFRAME_INVERTED))
-		value |= ATMEL_LCDC_INVFRAME_INVERTED;
+	value |= panel_info.vl_sync;
 	value |= (panel_info.vl_bpix << 5);
 	lcdc_writel(panel_info.mmio, ATMEL_LCDC_LCDCON2, value);
 
diff --git a/drivers/video/cfb_console.c b/drivers/video/cfb_console.c
index 79562ec11..779aa4b53 100644
--- a/drivers/video/cfb_console.c
+++ b/drivers/video/cfb_console.c
@@ -61,7 +61,7 @@
 
  CONFIG_CONSOLE_CURSOR	     - on/off drawing cursor is done with delay
 			       loop in VIDEO_TSTC_FCT (i8042)
- CFG_CONSOLE_BLINK_COUNT     - value for delay loop - blink rate
+ CONFIG_SYS_CONSOLE_BLINK_COUNT     - value for delay loop - blink rate
  CONFIG_CONSOLE_TIME	     - display time/date in upper right corner,
 			       needs CONFIG_CMD_DATE and CONFIG_CONSOLE_CURSOR
  CONFIG_VIDEO_LOGO	     - display Linux Logo in upper left corner
@@ -314,10 +314,10 @@ void	console_cursor (int state);
 #else
 #define SWAP16(x)	 (x)
 #define SWAP32(x)	 (x)
-#if !defined(VIDEO_FB_16BPP_PIXEL_SWAP)
-#define SHORTSWAP32(x)	 (x)
-#else
+#if defined(VIDEO_FB_16BPP_PIXEL_SWAP)
 #define SHORTSWAP32(x)	 ( ((x) >> 16) | ((x) << 16) )
+#else
+#define SHORTSWAP32(x)	 (x)
 #endif
 #endif
 
@@ -824,19 +824,19 @@ int video_display_bitmap (ulong bmp_image, int x, int y)
 		/*
 		 * Could be a gzipped bmp image, try to decrompress...
 		 */
-		len = CFG_VIDEO_LOGO_MAX_SIZE;
-		dst = malloc(CFG_VIDEO_LOGO_MAX_SIZE);
+		len = CONFIG_SYS_VIDEO_LOGO_MAX_SIZE;
+		dst = malloc(CONFIG_SYS_VIDEO_LOGO_MAX_SIZE);
 		if (dst == NULL) {
 			printf("Error: malloc in gunzip failed!\n");
 			return(1);
 		}
-		if (gunzip(dst, CFG_VIDEO_LOGO_MAX_SIZE, (uchar *)bmp_image, &len) != 0) {
+		if (gunzip(dst, CONFIG_SYS_VIDEO_LOGO_MAX_SIZE, (uchar *)bmp_image, &len) != 0) {
 			printf ("Error: no valid bmp or bmp.gz image at %lx\n", bmp_image);
 			free(dst);
 			return 1;
 		}
-		if (len == CFG_VIDEO_LOGO_MAX_SIZE) {
-			printf("Image could be truncated (increase CFG_VIDEO_LOGO_MAX_SIZE)!\n");
+		if (len == CONFIG_SYS_VIDEO_LOGO_MAX_SIZE) {
+			printf("Image could be truncated (increase CONFIG_SYS_VIDEO_LOGO_MAX_SIZE)!\n");
 		}
 
 		/*
@@ -932,12 +932,12 @@ int video_display_bitmap (ulong bmp_image, int x, int y)
 				xcount = width;
 				while (xcount--) {
 					cte = bmp->color_table[*bmap++];
-#if !defined(VIDEO_FB_16BPP_PIXEL_SWAP)
-					FILL_15BIT_555RGB (cte.red, cte.green, cte.blue);
-#else
+#if defined(VIDEO_FB_16BPP_PIXEL_SWAP)
 					fill_555rgb_pswap (fb, xpos++, cte.red,
 							   cte.green, cte.blue);
 					fb += 2;
+#else
+					FILL_15BIT_555RGB (cte.red, cte.green, cte.blue);
 #endif
 				}
 				bmap += padded_line;
@@ -1006,12 +1006,12 @@ int video_display_bitmap (ulong bmp_image, int x, int y)
 				WATCHDOG_RESET ();
 				xcount = width;
 				while (xcount--) {
-#if !defined(VIDEO_FB_16BPP_PIXEL_SWAP)
-					FILL_15BIT_555RGB (bmap[2], bmap[1], bmap[0]);
-#else
+#if defined(VIDEO_FB_16BPP_PIXEL_SWAP)
 					fill_555rgb_pswap (fb, xpos++, bmap[2],
 							   bmap[1], bmap[0]);
 					fb += 2;
+#else
+					FILL_15BIT_555RGB (bmap[2], bmap[1], bmap[0]);
 #endif
 					bmap += 3;
 				}
@@ -1136,11 +1136,11 @@ void logo_plot (void *screen, int width, int x, int y)
 				*dest = ((r >> 5) << 5) | ((g >> 5) << 2) | (b >> 6);
 				break;
 			case GDF_15BIT_555RGB:
-#if !defined(VIDEO_FB_16BPP_PIXEL_SWAP)
+#if defined(VIDEO_FB_16BPP_PIXEL_SWAP)
+				fill_555rgb_pswap (dest, xpos++, r, g, b);
+#else
 				*(unsigned short *) dest =
 					SWAP16 ((unsigned short) (((r >> 3) << 10) | ((g >> 3) << 5) | (b >> 3)));
-#else
-				fill_555rgb_pswap (dest, xpos++, r, g, b);
 #endif
 				break;
 			case GDF_16BIT_565RGB:
diff --git a/drivers/video/ct69000.c b/drivers/video/ct69000.c
index cae662eaa..ae219ccf8 100644
--- a/drivers/video/ct69000.c
+++ b/drivers/video/ct69000.c
@@ -1107,7 +1107,7 @@ video_hw_init (void)
 		pGD->gdfIndex = GDF_24BIT_888RGB;
 		break;
 	}
-	pGD->isaBase = CFG_ISA_IO_BASE_ADDRESS;
+	pGD->isaBase = CONFIG_SYS_ISA_IO_BASE_ADDRESS;
 	pGD->pciBase = pci_mem_base;
 	pGD->frameAdrs = pci_mem_base;
 	pGD->memSize = chips_param->max_mem;
diff --git a/drivers/video/mb862xx.c b/drivers/video/mb862xx.c
index 6c14b0d68..22a85d1a9 100644
--- a/drivers/video/mb862xx.c
+++ b/drivers/video/mb862xx.c
@@ -357,7 +357,8 @@ void *video_hw_init (void)
 	board_disp_init();
 #endif
 
-#if defined(CONFIG_LWMON5) && !(CONFIG_POST & CFG_POST_SYSMON)
+#if (defined(CONFIG_LWMON5) || \
+     defined(CONFIG_SOCRATES)) && !(CONFIG_POST & CONFIG_SYS_POST_SYSMON)
 	/* Lamp on */
 	board_backlight_switch (1);
 #endif
diff --git a/drivers/video/smiLynxEM.c b/drivers/video/smiLynxEM.c
index 390dd5697..59b43efca 100644
--- a/drivers/video/smiLynxEM.c
+++ b/drivers/video/smiLynxEM.c
@@ -596,7 +596,7 @@ void *video_hw_init (void)
 
 	tmp = 0;
 
-	videomode = CFG_DEFAULT_VIDEO_MODE;
+	videomode = CONFIG_SYS_DEFAULT_VIDEO_MODE;
 	/* get video mode via environment */
 	if ((penv = getenv ("videomode")) != NULL) {
 		/* deceide if it is a string */
@@ -615,7 +615,7 @@ void *video_hw_init (void)
 				break;
 		}
 		if (i == VESA_MODES_COUNT) {
-			printf ("no VESA Mode found, switching to mode 0x%x ", CFG_DEFAULT_VIDEO_MODE);
+			printf ("no VESA Mode found, switching to mode 0x%x ", CONFIG_SYS_DEFAULT_VIDEO_MODE);
 			i = 0;
 		}
 		res_mode =
@@ -669,7 +669,7 @@ void *video_hw_init (void)
 		break;
 	}
 
-	pGD->isaBase = CFG_ISA_IO;
+	pGD->isaBase = CONFIG_SYS_ISA_IO;
 	pGD->pciBase = pci_mem_base;
 	pGD->dprBase = (pci_mem_base + 0x400000 + 0x8000);
 	pGD->vprBase = (pci_mem_base + 0x400000 + 0xc000);
diff --git a/drivers/video/videomodes.c b/drivers/video/videomodes.c
index c81e5bc14..d27ce1d2c 100644
--- a/drivers/video/videomodes.c
+++ b/drivers/video/videomodes.c
@@ -23,7 +23,7 @@
 
 /************************************************************************
   Get Parameters for the video mode:
-  The default video mode can be defined in CFG_DEFAULT_VIDEO_MODE.
+  The default video mode can be defined in CONFIG_SYS_DEFAULT_VIDEO_MODE.
   If undefined, default video mode is set to 0x301
   Parameters can be set via the variable "videomode" in the environment.
   2 diferent ways are possible:
diff --git a/drivers/video/videomodes.h b/drivers/video/videomodes.h
index e2dffe7fe..0d7c33541 100644
--- a/drivers/video/videomodes.h
+++ b/drivers/video/videomodes.h
@@ -22,8 +22,8 @@
  */
 
 
-#ifndef CFG_DEFAULT_VIDEO_MODE
-#define CFG_DEFAULT_VIDEO_MODE	0x301
+#ifndef CONFIG_SYS_DEFAULT_VIDEO_MODE
+#define CONFIG_SYS_DEFAULT_VIDEO_MODE	0x301
 #endif
 
 /* Some mode definitions */
diff --git a/examples/82559_eeprom.c b/examples/82559_eeprom.c
index 1a121d428..5e2eee9e9 100644
--- a/examples/82559_eeprom.c
+++ b/examples/82559_eeprom.c
@@ -19,7 +19,6 @@
  */
 
 #define _PPC_STRING_H_		/* avoid unnecessary str/mem functions */
-#define _LINUX_STRING_H_	/* avoid unnecessary str/mem functions */
 
 #include <common.h>
 #include <exports.h>
@@ -51,13 +50,17 @@ static inline unsigned short swap16(unsigned short x)
 }
 
 
-static inline void *memcpy(void *dst, const void *src, unsigned int len)
+void * memcpy(void * dest,const void *src,size_t count)
 {
-	void * ret = dst;
-	while (len-- > 0) *((char *)dst)++ = *((char *)src)++;
-	return ret;
+	char *tmp = (char *) dest, *s = (char *) src;
+
+	while (count--)
+		*tmp++ = *s++;
+
+	return dest;
 }
 
+
 /* The EEPROM commands include the alway-set leading bit. */
 #define EE_WRITE_CMD	(5)
 #define EE_READ_CMD		(6)
@@ -156,7 +159,7 @@ static int reset_eeprom(unsigned long ioaddr, unsigned char *hwaddr)
 	int size_test;
 	int i;
 
-	printf("Resetting i82559 EEPROM @ 0x%08x ... ", ioaddr);
+	printf("Resetting i82559 EEPROM @ 0x%08lx ... ", ioaddr);
 
 	size_test = do_eeprom_cmd(ioaddr, (EE_READ_CMD << 8) << 16, 27);
 	eeprom_addr_size = (size_test & 0xffe0000) == 0xffe0000 ? 8 : 6;
@@ -305,7 +308,7 @@ write_config_word(int bus, int dev, int func, int reg, u16 data)
 int main (int argc, char *argv[])
 {
 	unsigned char *eth_addr;
-	char buf[6];
+	uchar buf[6];
 	int instance;
 
 	app_startup(argv);
diff --git a/examples/mem_to_mem_idma2intr.c b/examples/mem_to_mem_idma2intr.c
index 3ff28041f..15779d0a1 100644
--- a/examples/mem_to_mem_idma2intr.c
+++ b/examples/mem_to_mem_idma2intr.c
@@ -39,8 +39,8 @@ DECLARE_GLOBAL_DATA_PTR;
 #include <watchdog.h>
 #else					/* Standalone app of PPCBoot */
 #define WATCHDOG_RESET() {						\
-			*(ushort *)(CFG_IMMR + 0x1000E) = 0x556c;	\
-			*(ushort *)(CFG_IMMR + 0x1000E) = 0xaa39;	\
+			*(ushort *)(CONFIG_SYS_IMMR + 0x1000E) = 0x556c;	\
+			*(ushort *)(CONFIG_SYS_IMMR + 0x1000E) = 0xaa39;	\
 		}
 #endif	/* STANDALONE */
 
@@ -156,7 +156,7 @@ typedef struct pram_idma {
 } pram_idma_t;
 
 
-volatile immap_t *immap = (immap_t *) CFG_IMMR;
+volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
 volatile ibd_t *bdf;
 volatile pram_idma_t *piptr;
 
@@ -348,7 +348,7 @@ static uint dpbase = 0;
 
 uint dpalloc (uint size, uint align)
 {
-	volatile immap_t *immr = (immap_t *) CFG_IMMR;
+	volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
 	uint retloc;
 	uint align_mask, off;
 	uint savebase;
diff --git a/examples/mips.lds b/examples/mips.lds
index aceb6e900..939e0e61c 100644
--- a/examples/mips.lds
+++ b/examples/mips.lds
@@ -53,7 +53,7 @@ SECTIONS
 	. = ALIGN(4);
 	__bss_start = .;
 	.sbss (NOLOAD) : { *(.sbss) }
-	.bss (NOLOAD)  : { *(.bss) }
+	.bss (NOLOAD)  : { *(.bss) . = ALIGN(4); }
 
 	_end = .;
 }
diff --git a/examples/stubs.c b/examples/stubs.c
index ec5353216..a8cb95428 100644
--- a/examples/stubs.c
+++ b/examples/stubs.c
@@ -162,11 +162,13 @@ gd_t *global_data;
 		#x ":\n"				\
 		"	mov	r13, r1\n"		\
 		"	add	%0, r1\n"		\
-		"	add	%1, r1\n"		\
+		"	mov.l @r1, r2\n"	\
+		"	add	%1, r2\n"		\
+		"	mov.l @r2, r1\n"	\
 		"	jmp	@r1\n"			\
 		"	nop\n"				\
 		"	nop\n"				\
-		: : "i"(offsetof(gd_t, jt)), "i"(XF_ ## x * sizeof(void *)) : "r1");
+		: : "i"(offsetof(gd_t, jt)), "i"(XF_ ## x * sizeof(void *)) : "r1", "r2");
 #elif defined(CONFIG_SPARC)
 /*
  * g7 holds the pointer to the global_data. g1 is call clobbered.
diff --git a/examples/test_burst.c b/examples/test_burst.c
index d8c5ed4a9..7109c098e 100644
--- a/examples/test_burst.c
+++ b/examples/test_burst.c
@@ -50,19 +50,19 @@
 /* Define GPIO ports to signal start of burst transfers and errors */
 #ifdef CONFIG_LWMON
 /* Use PD.8 to signal start of burst transfers */
-#define GPIO1_DAT	(((volatile immap_t *)CFG_IMMR)->im_ioport.iop_pddat)
+#define GPIO1_DAT	(((volatile immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pddat)
 #define GPIO1_BIT	0x0080
 /* Configure PD.8 as general purpose output */
 #define GPIO1_INIT \
-	((volatile immap_t *)CFG_IMMR)->im_ioport.iop_pdpar &= ~GPIO1_BIT; \
-	((volatile immap_t *)CFG_IMMR)->im_ioport.iop_pddir |=  GPIO1_BIT;
+	((volatile immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pdpar &= ~GPIO1_BIT; \
+	((volatile immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pddir |=  GPIO1_BIT;
 /* Use PD.9 to signal error */
-#define GPIO2_DAT	(((volatile immap_t *)CFG_IMMR)->im_ioport.iop_pddat)
+#define GPIO2_DAT	(((volatile immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pddat)
 #define GPIO2_BIT	0x0040
 /* Configure PD.9 as general purpose output */
 #define GPIO2_INIT \
-	((volatile immap_t *)CFG_IMMR)->im_ioport.iop_pdpar &= ~GPIO2_BIT; \
-	((volatile immap_t *)CFG_IMMR)->im_ioport.iop_pddir |=  GPIO2_BIT;
+	((volatile immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pdpar &= ~GPIO2_BIT; \
+	((volatile immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pddir |=  GPIO2_BIT;
 #endif /* CONFIG_LWMON */
 
 
diff --git a/fs/fat/fat.c b/fs/fat/fat.c
index 2f0bd8c14..a9dde7def 100644
--- a/fs/fat/fat.c
+++ b/fs/fat/fat.c
@@ -84,6 +84,7 @@ fat_register_device(block_dev_desc_t *dev_desc, int part_no)
 		return -1;
 	}
 #if (defined(CONFIG_CMD_IDE) || \
+     defined(CONFIG_CMD_SATA) || \
      defined(CONFIG_CMD_SCSI) || \
      defined(CONFIG_CMD_USB) || \
      defined(CONFIG_MMC) || \
@@ -184,7 +185,7 @@ static void get_name (dir_entry *dirent, char *s_name)
 	if (*s_name == DELETED_FLAG)
 		*s_name = '\0';
 	else if (*s_name == aRING)
-		*s_name = 'å';
+		*s_name = DELETED_FLAG;
 	downcase (s_name);
 }
 
@@ -489,7 +490,7 @@ get_vfatname(fsdata *mydata, int curclust, __u8 *cluster,
 
 	l_name[idx] = '\0';
 	if (*l_name == DELETED_FLAG) *l_name = '\0';
-	else if (*l_name == aRING) *l_name = 'å';
+	else if (*l_name == aRING) *l_name = DELETED_FLAG;
 	downcase(l_name);
 
 	/* Return the real directory entry */
@@ -980,12 +981,14 @@ file_fat_detectfs(void)
 		return 1;
 	}
 #if defined(CONFIG_CMD_IDE) || \
+    defined(CONFIG_CMD_SATA) || \
     defined(CONFIG_CMD_SCSI) || \
     defined(CONFIG_CMD_USB) || \
     defined(CONFIG_MMC)
 	printf("Interface:  ");
 	switch(cur_dev->if_type) {
 		case IF_TYPE_IDE :	printf("IDE"); break;
+		case IF_TYPE_SATA :	printf("SATA"); break;
 		case IF_TYPE_SCSI :	printf("SCSI"); break;
 		case IF_TYPE_ATAPI :	printf("ATAPI"); break;
 		case IF_TYPE_USB :	printf("USB"); break;
diff --git a/fs/jffs2/jffs2_1pass.c b/fs/jffs2/jffs2_1pass.c
index 5d22dd78e..11b66ab4b 100644
--- a/fs/jffs2/jffs2_1pass.c
+++ b/fs/jffs2/jffs2_1pass.c
@@ -92,7 +92,7 @@
  * - implemented fragment sorting to ensure that the newest data is copied
  *   if there are multiple copies of fragments for a certain file offset.
  *
- * The fragment sorting feature must be enabled by CFG_JFFS2_SORT_FRAGMENTS.
+ * The fragment sorting feature must be enabled by CONFIG_SYS_JFFS2_SORT_FRAGMENTS.
  * Sorting is done while adding fragments to the lists, which is more or less a
  * bubble sort. This takes a lot of time, and is most probably not an issue if
  * the boot filesystem is always mounted readonly.
@@ -119,6 +119,7 @@
 #include <watchdog.h>
 #include <jffs2/jffs2.h>
 #include <jffs2/jffs2_1pass.h>
+#include <linux/mtd/compat.h>
 
 #include "jffs2_private.h"
 
@@ -138,6 +139,8 @@
 # define DEBUGF(fmt,args...)
 #endif
 
+#include "summary.h"
+
 /* keeps pointer to currentlu processed partition */
 static struct part_info *current_part;
 
@@ -245,7 +248,7 @@ static void *get_fl_mem_nand(u32 off, u32 size, void *ext_buf)
 	return buf;
 }
 
-static void *get_node_mem_nand(u32 off)
+static void *get_node_mem_nand(u32 off, void *ext_buf)
 {
 	struct jffs2_unknown_node node;
 	void *ret = NULL;
@@ -255,7 +258,7 @@ static void *get_node_mem_nand(u32 off)
 
 	if (!(ret = get_fl_mem_nand(off, node.magic ==
 			       JFFS2_MAGIC_BITMASK ? node.totlen : sizeof(node),
-			       NULL))) {
+			       ext_buf))) {
 		printf("off = %#x magic %#x type %#x node.totlen = %d\n",
 		       off, node.magic, node.nodetype, node.totlen);
 	}
@@ -268,6 +271,107 @@ static void put_fl_mem_nand(void *buf)
 }
 #endif
 
+#if defined(CONFIG_CMD_ONENAND)
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/onenand.h>
+#include <onenand_uboot.h>
+
+#define ONENAND_PAGE_SIZE 2048
+#define ONENAND_PAGE_SHIFT 11
+#define ONENAND_PAGE_MASK (~(ONENAND_PAGE_SIZE-1))
+
+#ifndef ONENAND_CACHE_PAGES
+#define ONENAND_CACHE_PAGES 4
+#endif
+#define ONENAND_CACHE_SIZE (ONENAND_CACHE_PAGES*ONENAND_PAGE_SIZE)
+
+static u8* onenand_cache;
+static u32 onenand_cache_off = (u32)-1;
+
+static int read_onenand_cached(u32 off, u32 size, u_char *buf)
+{
+	u32 bytes_read = 0;
+	size_t retlen;
+	int cpy_bytes;
+
+	while (bytes_read < size) {
+		if ((off + bytes_read < onenand_cache_off) ||
+		    (off + bytes_read >= onenand_cache_off + ONENAND_CACHE_SIZE)) {
+			onenand_cache_off = (off + bytes_read) & ONENAND_PAGE_MASK;
+			if (!onenand_cache) {
+				/* This memory never gets freed but 'cause
+				   it's a bootloader, nobody cares */
+				onenand_cache = malloc(ONENAND_CACHE_SIZE);
+				if (!onenand_cache) {
+					printf("read_onenand_cached: can't alloc cache size %d bytes\n",
+					       ONENAND_CACHE_SIZE);
+					return -1;
+				}
+			}
+
+			retlen = ONENAND_CACHE_SIZE;
+			if (onenand_read(&onenand_mtd, onenand_cache_off, retlen,
+						&retlen, onenand_cache) != 0 ||
+					retlen != ONENAND_CACHE_SIZE) {
+				printf("read_onenand_cached: error reading nand off %#x size %d bytes\n",
+					onenand_cache_off, ONENAND_CACHE_SIZE);
+				return -1;
+			}
+		}
+		cpy_bytes = onenand_cache_off + ONENAND_CACHE_SIZE - (off + bytes_read);
+		if (cpy_bytes > size - bytes_read)
+			cpy_bytes = size - bytes_read;
+		memcpy(buf + bytes_read,
+		       onenand_cache + off + bytes_read - onenand_cache_off,
+		       cpy_bytes);
+		bytes_read += cpy_bytes;
+	}
+	return bytes_read;
+}
+
+static void *get_fl_mem_onenand(u32 off, u32 size, void *ext_buf)
+{
+	u_char *buf = ext_buf ? (u_char *)ext_buf : (u_char *)malloc(size);
+
+	if (NULL == buf) {
+		printf("get_fl_mem_onenand: can't alloc %d bytes\n", size);
+		return NULL;
+	}
+	if (read_onenand_cached(off, size, buf) < 0) {
+		if (!ext_buf)
+			free(buf);
+		return NULL;
+	}
+
+	return buf;
+}
+
+static void *get_node_mem_onenand(u32 off, void *ext_buf)
+{
+	struct jffs2_unknown_node node;
+	void *ret = NULL;
+
+	if (NULL == get_fl_mem_onenand(off, sizeof(node), &node))
+		return NULL;
+
+	ret = get_fl_mem_onenand(off, node.magic ==
+			JFFS2_MAGIC_BITMASK ? node.totlen : sizeof(node),
+			ext_buf);
+	if (!ret) {
+		printf("off = %#x magic %#x type %#x node.totlen = %d\n",
+		       off, node.magic, node.nodetype, node.totlen);
+	}
+	return ret;
+}
+
+
+static void put_fl_mem_onenand(void *buf)
+{
+	free(buf);
+}
+#endif
+
 
 #if defined(CONFIG_CMD_FLASH)
 /*
@@ -276,7 +380,7 @@ static void put_fl_mem_nand(void *buf)
  * NOR flash memory is mapped in processor's address space,
  * just return address.
  */
-static inline void *get_fl_mem_nor(u32 off)
+static inline void *get_fl_mem_nor(u32 off, u32 size, void *ext_buf)
 {
 	u32 addr = off;
 	struct mtdids *id = current_part->dev->id;
@@ -285,12 +389,22 @@ static inline void *get_fl_mem_nor(u32 off)
 	flash_info_t *flash = &flash_info[id->num];
 
 	addr += flash->start[0];
+	if (ext_buf) {
+		memcpy(ext_buf, (void *)addr, size);
+		return ext_buf;
+	}
 	return (void*)addr;
 }
 
-static inline void *get_node_mem_nor(u32 off)
+static inline void *get_node_mem_nor(u32 off, void *ext_buf)
 {
-	return (void*)get_fl_mem_nor(off);
+	struct jffs2_unknown_node *pNode;
+
+	/* pNode will point directly to flash - don't provide external buffer
+	   and don't care about size */
+	pNode = get_fl_mem_nor(off, 0, NULL);
+	return (void *)get_fl_mem_nor(off, pNode->magic == JFFS2_MAGIC_BITMASK ?
+			pNode->totlen : sizeof(*pNode), ext_buf);
 }
 #endif
 
@@ -304,8 +418,9 @@ static inline void *get_fl_mem(u32 off, u32 size, void *ext_buf)
 	struct mtdids *id = current_part->dev->id;
 
 #if defined(CONFIG_CMD_FLASH)
-	if (id->type == MTD_DEV_TYPE_NOR)
-		return get_fl_mem_nor(off);
+	if (id->type == MTD_DEV_TYPE_NOR) {
+		return get_fl_mem_nor(off, size, ext_buf);
+	}
 #endif
 
 #if defined(CONFIG_JFFS2_NAND) && defined(CONFIG_CMD_NAND)
@@ -313,38 +428,57 @@ static inline void *get_fl_mem(u32 off, u32 size, void *ext_buf)
 		return get_fl_mem_nand(off, size, ext_buf);
 #endif
 
+#if defined(CONFIG_CMD_ONENAND)
+	if (id->type == MTD_DEV_TYPE_ONENAND)
+		return get_fl_mem_onenand(off, size, ext_buf);
+#endif
+
 	printf("get_fl_mem: unknown device type, using raw offset!\n");
 	return (void*)off;
 }
 
-static inline void *get_node_mem(u32 off)
+static inline void *get_node_mem(u32 off, void *ext_buf)
 {
 	struct mtdids *id = current_part->dev->id;
 
 #if defined(CONFIG_CMD_FLASH)
 	if (id->type == MTD_DEV_TYPE_NOR)
-		return get_node_mem_nor(off);
+		return get_node_mem_nor(off, ext_buf);
 #endif
 
 #if defined(CONFIG_JFFS2_NAND) && \
     defined(CONFIG_CMD_NAND)
 	if (id->type == MTD_DEV_TYPE_NAND)
-		return get_node_mem_nand(off);
+		return get_node_mem_nand(off, ext_buf);
+#endif
+
+#if defined(CONFIG_CMD_ONENAND)
+	if (id->type == MTD_DEV_TYPE_ONENAND)
+		return get_node_mem_onenand(off, ext_buf);
 #endif
 
 	printf("get_node_mem: unknown device type, using raw offset!\n");
 	return (void*)off;
 }
 
-static inline void put_fl_mem(void *buf)
+static inline void put_fl_mem(void *buf, void *ext_buf)
 {
-#if defined(CONFIG_JFFS2_NAND) && \
-    defined(CONFIG_CMD_NAND)
 	struct mtdids *id = current_part->dev->id;
 
-	if (id->type == MTD_DEV_TYPE_NAND)
+	/* If buf is the same as ext_buf, it was provided by the caller -
+	   we shouldn't free it then. */
+	if (buf == ext_buf)
+		return;
+	switch (id->type) {
+#if defined(CONFIG_JFFS2_NAND) && defined(CONFIG_CMD_NAND)
+	case MTD_DEV_TYPE_NAND:
 		return put_fl_mem_nand(buf);
 #endif
+#if defined(CONFIG_CMD_ONENAND)
+	case MTD_DEV_TYPE_ONENAND:
+		return put_fl_mem_onenand(buf);
+#endif
+	}
 }
 
 /* Compression names */
@@ -362,9 +496,6 @@ static char *compr_names[] = {
 #endif
 };
 
-/* Spinning wheel */
-static char spinner[] = { '|', '/', '-', '\\' };
-
 /* Memory management */
 struct mem_block {
 	u32	index;
@@ -426,7 +557,7 @@ static struct b_node *
 insert_node(struct b_list *list, u32 offset)
 {
 	struct b_node *new;
-#ifdef CFG_JFFS2_SORT_FRAGMENTS
+#ifdef CONFIG_SYS_JFFS2_SORT_FRAGMENTS
 	struct b_node *b, *prev;
 #endif
 
@@ -436,7 +567,7 @@ insert_node(struct b_list *list, u32 offset)
 	}
 	new->offset = offset;
 
-#ifdef CFG_JFFS2_SORT_FRAGMENTS
+#ifdef CONFIG_SYS_JFFS2_SORT_FRAGMENTS
 	if (list->listTail != NULL && list->listCompare(new, list->listTail))
 		prev = list->listTail;
 	else if (list->listLast != NULL && list->listCompare(new, list->listLast))
@@ -473,7 +604,7 @@ insert_node(struct b_list *list, u32 offset)
 	return new;
 }
 
-#ifdef CFG_JFFS2_SORT_FRAGMENTS
+#ifdef CONFIG_SYS_JFFS2_SORT_FRAGMENTS
 /* Sort data entries with the latest version last, so that if there
  * is overlapping data the latest version will be used.
  */
@@ -535,23 +666,6 @@ static int compare_dirents(struct b_node *new, struct b_node *old)
 }
 #endif
 
-static u32
-jffs2_scan_empty(u32 start_offset, struct part_info *part)
-{
-	char *max = (char *)(part->offset + part->size - sizeof(struct jffs2_raw_inode));
-	char *offset = (char *)(part->offset + start_offset);
-	u32 off;
-
-	while (offset < max &&
-	       *(u32*)get_fl_mem((u32)offset, sizeof(u32), &off) == 0xFFFFFFFF) {
-		offset += sizeof(u32);
-		/* return if spinning is due */
-		if (((u32)offset & ((1 << SPIN_BLKSIZE)-1)) == 0) break;
-	}
-
-	return (u32)offset - part->offset;
-}
-
 void
 jffs2_free_cache(struct part_info *part)
 {
@@ -561,6 +675,7 @@ jffs2_free_cache(struct part_info *part)
 		pL = (struct b_lists *)part->jffs2_priv;
 		free_nodes(&pL->frag);
 		free_nodes(&pL->dir);
+		free(pL->readbuf);
 		free(pL);
 	}
 }
@@ -576,7 +691,7 @@ jffs_init_1pass_list(struct part_info *part)
 		pL = (struct b_lists *)part->jffs2_priv;
 
 		memset(pL, 0, sizeof(*pL));
-#ifdef CFG_JFFS2_SORT_FRAGMENTS
+#ifdef CONFIG_SYS_JFFS2_SORT_FRAGMENTS
 		pL->dir.listCompare = compare_dirents;
 		pL->frag.listCompare = compare_inodes;
 #endif
@@ -597,7 +712,7 @@ jffs2_1pass_read_inode(struct b_lists *pL, u32 inode, char *dest)
 	long ret;
 	int i;
 	u32 counter = 0;
-#ifdef CFG_JFFS2_SORT_FRAGMENTS
+#ifdef CONFIG_SYS_JFFS2_SORT_FRAGMENTS
 	/* Find file size before loading any data, so fragments that
 	 * start past the end of file can be ignored. A fragment
 	 * that is partially in the file is loaded, so extra data may
@@ -607,7 +722,7 @@ jffs2_1pass_read_inode(struct b_lists *pL, u32 inode, char *dest)
 	 */
 	for (b = pL->frag.listHead; b != NULL; b = b->next) {
 		jNode = (struct jffs2_raw_inode *) get_fl_mem(b->offset,
-		        sizeof(struct jffs2_raw_inode), NULL);
+			sizeof(struct jffs2_raw_inode), pL->readbuf);
 		if ((inode == jNode->ino)) {
 			/* get actual file length from the newest node */
 			if (jNode->version >= latestVersion) {
@@ -615,12 +730,13 @@ jffs2_1pass_read_inode(struct b_lists *pL, u32 inode, char *dest)
 				latestVersion = jNode->version;
 			}
 		}
-		put_fl_mem(jNode);
+		put_fl_mem(jNode, pL->readbuf);
 	}
 #endif
 
 	for (b = pL->frag.listHead; b != NULL; b = b->next) {
-		jNode = (struct jffs2_raw_inode *) get_node_mem(b->offset);
+		jNode = (struct jffs2_raw_inode *) get_node_mem(b->offset,
+								pL->readbuf);
 		if ((inode == jNode->ino)) {
 #if 0
 			putLabeledWord("\r\n\r\nread_inode: totlen = ", jNode->totlen);
@@ -635,7 +751,7 @@ jffs2_1pass_read_inode(struct b_lists *pL, u32 inode, char *dest)
 			putLabeledWord("read_inode: flags = ", jNode->flags);
 #endif
 
-#ifndef CFG_JFFS2_SORT_FRAGMENTS
+#ifndef CONFIG_SYS_JFFS2_SORT_FRAGMENTS
 			/* get actual file length from the newest node */
 			if (jNode->version >= latestVersion) {
 				totalSize = jNode->isize;
@@ -647,7 +763,14 @@ jffs2_1pass_read_inode(struct b_lists *pL, u32 inode, char *dest)
 				src = ((uchar *) jNode) + sizeof(struct jffs2_raw_inode);
 				/* ignore data behind latest known EOF */
 				if (jNode->offset > totalSize) {
-					put_fl_mem(jNode);
+					put_fl_mem(jNode, pL->readbuf);
+					continue;
+				}
+				if (b->datacrc == CRC_UNKNOWN)
+					b->datacrc = data_crc(jNode) ?
+						CRC_OK : CRC_BAD;
+				if (b->datacrc == CRC_BAD) {
+					put_fl_mem(jNode, pL->readbuf);
 					continue;
 				}
 
@@ -688,7 +811,7 @@ jffs2_1pass_read_inode(struct b_lists *pL, u32 inode, char *dest)
 				default:
 					/* unknown */
 					putLabeledWord("UNKOWN COMPRESSION METHOD = ", jNode->compr);
-					put_fl_mem(jNode);
+					put_fl_mem(jNode, pL->readbuf);
 					return -1;
 					break;
 				}
@@ -700,7 +823,7 @@ jffs2_1pass_read_inode(struct b_lists *pL, u32 inode, char *dest)
 #endif
 		}
 		counter++;
-		put_fl_mem(jNode);
+		put_fl_mem(jNode, pL->readbuf);
 	}
 
 #if 0
@@ -726,12 +849,13 @@ jffs2_1pass_find_inode(struct b_lists * pL, const char *name, u32 pino)
 	counter = 0;
 	/* we need to search all and return the inode with the highest version */
 	for(b = pL->dir.listHead; b; b = b->next, counter++) {
-		jDir = (struct jffs2_raw_dirent *) get_node_mem(b->offset);
+		jDir = (struct jffs2_raw_dirent *) get_node_mem(b->offset,
+								pL->readbuf);
 		if ((pino == jDir->pino) && (len == jDir->nsize) &&
 		    (jDir->ino) &&	/* 0 for unlink */
 		    (!strncmp((char *)jDir->name, name, len))) {	/* a match */
 			if (jDir->version < version) {
-				put_fl_mem(jDir);
+				put_fl_mem(jDir, pL->readbuf);
 				continue;
 			}
 
@@ -753,7 +877,7 @@ jffs2_1pass_find_inode(struct b_lists * pL, const char *name, u32 pino)
 		putLabeledWord("b = ", (u32) b);
 		putLabeledWord("counter = ", counter);
 #endif
-		put_fl_mem(jDir);
+		put_fl_mem(jDir, pL->readbuf);
 	}
 	return inode;
 }
@@ -824,9 +948,7 @@ static inline u32 dump_inode(struct b_lists * pL, struct jffs2_raw_dirent *d, st
 	st.st_mtime = i->mtime;
 	st.st_mode = i->mode;
 	st.st_ino = i->ino;
-
-	/* neither dsize nor isize help us.. do it the long way */
-	st.st_size = jffs2_1pass_read_inode(pL, i->ino, NULL);
+	st.st_size = i->isize;
 
 	dump_stat(&st, fname);
 
@@ -849,7 +971,8 @@ jffs2_1pass_list_inodes(struct b_lists * pL, u32 pino)
 	struct jffs2_raw_dirent *jDir;
 
 	for (b = pL->dir.listHead; b; b = b->next) {
-		jDir = (struct jffs2_raw_dirent *) get_node_mem(b->offset);
+		jDir = (struct jffs2_raw_dirent *) get_node_mem(b->offset,
+								pL->readbuf);
 		if ((pino == jDir->pino) && (jDir->ino)) { /* ino=0 -> unlink */
 			u32 i_version = 0;
 			struct jffs2_raw_inode ojNode;
@@ -860,21 +983,25 @@ jffs2_1pass_list_inodes(struct b_lists * pL, u32 pino)
 				jNode = (struct jffs2_raw_inode *)
 					get_fl_mem(b2->offset, sizeof(ojNode), &ojNode);
 				if (jNode->ino == jDir->ino && jNode->version >= i_version) {
+					i_version = jNode->version;
 					if (i)
-						put_fl_mem(i);
+						put_fl_mem(i, NULL);
 
 					if (jDir->type == DT_LNK)
-						i = get_node_mem(b2->offset);
+						i = get_node_mem(b2->offset,
+								 NULL);
 					else
-						i = get_fl_mem(b2->offset, sizeof(*i), NULL);
+						i = get_fl_mem(b2->offset,
+							       sizeof(*i),
+							       NULL);
 				}
 				b2 = b2->next;
 			}
 
 			dump_inode(pL, jDir, i);
-			put_fl_mem(i);
+			put_fl_mem(i, NULL);
 		}
-		put_fl_mem(jDir);
+		put_fl_mem(jDir, pL->readbuf);
 	}
 	return pino;
 }
@@ -952,10 +1079,11 @@ jffs2_1pass_resolve_inode(struct b_lists * pL, u32 ino)
 
 	/* we need to search all and return the inode with the highest version */
 	for(b = pL->dir.listHead; b; b = b->next) {
-		jDir = (struct jffs2_raw_dirent *) get_node_mem(b->offset);
+		jDir = (struct jffs2_raw_dirent *) get_node_mem(b->offset,
+								pL->readbuf);
 		if (ino == jDir->ino) {
 			if (jDir->version < version) {
-				put_fl_mem(jDir);
+				put_fl_mem(jDir, pL->readbuf);
 				continue;
 			}
 
@@ -972,7 +1100,7 @@ jffs2_1pass_resolve_inode(struct b_lists * pL, u32 ino)
 			jDirFoundPino = jDir->pino;
 			version = jDir->version;
 		}
-		put_fl_mem(jDir);
+		put_fl_mem(jDir, pL->readbuf);
 	}
 	/* now we found the right entry again. (shoulda returned inode*) */
 	if (jDirFoundType != DT_LNK)
@@ -981,7 +1109,8 @@ jffs2_1pass_resolve_inode(struct b_lists * pL, u32 ino)
 	/* it's a soft link so we follow it again. */
 	b2 = pL->frag.listHead;
 	while (b2) {
-		jNode = (struct jffs2_raw_inode *) get_node_mem(b2->offset);
+		jNode = (struct jffs2_raw_inode *) get_node_mem(b2->offset,
+								pL->readbuf);
 		if (jNode->ino == jDirFoundIno) {
 			src = (unsigned char *)jNode + sizeof(struct jffs2_raw_inode);
 
@@ -993,11 +1122,11 @@ jffs2_1pass_resolve_inode(struct b_lists * pL, u32 ino)
 #endif
 			strncpy(tmp, (char *)src, jNode->dsize);
 			tmp[jNode->dsize] = '\0';
-			put_fl_mem(jNode);
+			put_fl_mem(jNode, pL->readbuf);
 			break;
 		}
 		b2 = b2->next;
-		put_fl_mem(jNode);
+		put_fl_mem(jNode, pL->readbuf);
 	}
 	/* ok so the name of the new file to find is in tmp */
 	/* if it starts with a slash it is root based else shared dirs */
@@ -1091,6 +1220,132 @@ jffs2_1pass_rescan_needed(struct part_info *part)
 	return 0;
 }
 
+#define dbg_summary(...) do {} while (0);
+/* Process the stored summary information - helper function for
+ * jffs2_sum_scan_sumnode()
+ */
+
+static int jffs2_sum_process_sum_data(struct part_info *part, uint32_t offset,
+				struct jffs2_raw_summary *summary,
+				struct b_lists *pL)
+{
+	void *sp;
+	int i;
+
+	sp = summary->sum;
+
+	for (i = 0; i < summary->sum_num; i++) {
+		dbg_summary("processing summary index %d\n", i);
+
+		switch (((struct jffs2_sum_unknown_flash *)sp)->nodetype) {
+			case JFFS2_NODETYPE_INODE: {
+				struct jffs2_sum_inode_flash *spi;
+				spi = sp;
+
+				dbg_summary("Inode at 0x%08x-0x%08x\n",
+					    offset + spi->offset,
+					    offset + spi->offset + spi->totlen);
+
+				if (insert_node(&pL->frag, (u32) part->offset +
+						offset + spi->offset) == NULL)
+					return -1;
+
+				sp += JFFS2_SUMMARY_INODE_SIZE;
+
+				break;
+			}
+
+			case JFFS2_NODETYPE_DIRENT: {
+				struct jffs2_sum_dirent_flash *spd;
+				spd = sp;
+
+				dbg_summary("Dirent at 0x%08x-0x%08x\n",
+					    offset + spd->offset,
+					    offset + spd->offset + spd->totlen);
+
+				if (insert_node(&pL->dir, (u32) part->offset +
+						offset + spd->offset) == NULL)
+					return -1;
+
+				sp += JFFS2_SUMMARY_DIRENT_SIZE(spd->nsize);
+
+				break;
+			}
+			default : {
+				uint16_t nodetype =
+					((struct jffs2_sum_unknown_flash *)
+					 sp)->nodetype;
+				printf("Unsupported node type %x found in "
+						"summary!\n", nodetype);
+				break;
+			}
+		}
+	}
+	return 0;
+}
+
+/* Process the summary node - called from jffs2_scan_eraseblock() */
+int jffs2_sum_scan_sumnode(struct part_info *part, uint32_t offset,
+			   struct jffs2_raw_summary *summary, uint32_t sumsize,
+			   struct b_lists *pL)
+{
+	struct jffs2_unknown_node crcnode;
+	int ret, ofs;
+	uint32_t crc;
+
+	ofs = part->sector_size - sumsize;
+
+	dbg_summary("summary found for 0x%08x at 0x%08x (0x%x bytes)\n",
+		    offset, offset + ofs, sumsize);
+
+	/* OK, now check for node validity and CRC */
+	crcnode.magic = JFFS2_MAGIC_BITMASK;
+	crcnode.nodetype = JFFS2_NODETYPE_SUMMARY;
+	crcnode.totlen = summary->totlen;
+	crc = crc32_no_comp(0, (uchar *)&crcnode, sizeof(crcnode)-4);
+
+	if (summary->hdr_crc != crc) {
+		dbg_summary("Summary node header is corrupt (bad CRC or "
+				"no summary at all)\n");
+		goto crc_err;
+	}
+
+	if (summary->totlen != sumsize) {
+		dbg_summary("Summary node is corrupt (wrong erasesize?)\n");
+		goto crc_err;
+	}
+
+	crc = crc32_no_comp(0, (uchar *)summary,
+			sizeof(struct jffs2_raw_summary)-8);
+
+	if (summary->node_crc != crc) {
+		dbg_summary("Summary node is corrupt (bad CRC)\n");
+		goto crc_err;
+	}
+
+	crc = crc32_no_comp(0, (uchar *)summary->sum,
+			sumsize - sizeof(struct jffs2_raw_summary));
+
+	if (summary->sum_crc != crc) {
+		dbg_summary("Summary node data is corrupt (bad CRC)\n");
+		goto crc_err;
+	}
+
+	if (summary->cln_mkr)
+		dbg_summary("Summary : CLEANMARKER node \n");
+
+	ret = jffs2_sum_process_sum_data(part, offset, summary, pL);
+	if (ret)
+		return ret;		/* real error */
+
+	return 1;
+
+crc_err:
+	putstr("Summary node crc error, skipping summary information.\n");
+
+	return 0;
+}
+
 #ifdef DEBUG_FRAGMENTS
 static void
 dump_fragments(struct b_lists *pL)
@@ -1132,7 +1387,8 @@ dump_dirents(struct b_lists *pL)
 	putstr("\r\n\r\n******The directory Entries******\r\n");
 	b = pL->dir.listHead;
 	while (b) {
-		jDir = (struct jffs2_raw_dirent *) get_node_mem(b->offset);
+		jDir = (struct jffs2_raw_dirent *) get_node_mem(b->offset,
+								pL->readbuf);
 		putstr("\r\n");
 		putnstr(jDir->name, jDir->nsize);
 		putLabeledWord("\r\n\tbuild_list: magic = ", jDir->magic);
@@ -1148,22 +1404,34 @@ dump_dirents(struct b_lists *pL)
 		putLabeledWord("\tbuild_list: name_crc = ", jDir->name_crc);
 		putLabeledWord("\tbuild_list: offset = ", b->offset);	/* FIXME: ? [RS] */
 		b = b->next;
-		put_fl_mem(jDir);
+		put_fl_mem(jDir, pL->readbuf);
 	}
 }
 #endif
 
+#define DEFAULT_EMPTY_SCAN_SIZE	4096
+
+static inline uint32_t EMPTY_SCAN_SIZE(uint32_t sector_size)
+{
+	if (sector_size < DEFAULT_EMPTY_SCAN_SIZE)
+		return sector_size;
+	else
+		return DEFAULT_EMPTY_SCAN_SIZE;
+}
+
 static u32
 jffs2_1pass_build_lists(struct part_info * part)
 {
 	struct b_lists *pL;
 	struct jffs2_unknown_node *node;
-	u32 offset, oldoffset = 0;
-	u32 max = part->size - sizeof(struct jffs2_raw_inode);
-	u32 counter = 0;
+	u32 nr_sectors = part->size/part->sector_size;
+	u32 i;
 	u32 counter4 = 0;
 	u32 counterF = 0;
 	u32 counterN = 0;
+	u32 max_totlen = 0;
+	u32 buf_size = DEFAULT_EMPTY_SCAN_SIZE;
+	char *buf;
 
 	/* turn off the lcd.  Refreshing the lcd adds 50% overhead to the */
 	/* jffs2 list building enterprise nope.  in newer versions the overhead is */
@@ -1173,71 +1441,245 @@ jffs2_1pass_build_lists(struct part_info * part)
 	/* if we are building a list we need to refresh the cache. */
 	jffs_init_1pass_list(part);
 	pL = (struct b_lists *)part->jffs2_priv;
-	offset = 0;
+	buf = malloc(buf_size);
 	puts ("Scanning JFFS2 FS:   ");
 
 	/* start at the beginning of the partition */
-	while (offset < max) {
-		if ((oldoffset >> SPIN_BLKSIZE) != (offset >> SPIN_BLKSIZE)) {
-			printf("\b\b%c ", spinner[counter++ % sizeof(spinner)]);
-			oldoffset = offset;
-		}
+	for (i = 0; i < nr_sectors; i++) {
+		uint32_t sector_ofs = i * part->sector_size;
+		uint32_t buf_ofs = sector_ofs;
+		uint32_t buf_len;
+		uint32_t ofs, prevofs;
+		struct jffs2_sum_marker *sm;
+		void *sumptr = NULL;
+		uint32_t sumlen;
+		int ret;
 
 		WATCHDOG_RESET();
 
-		node = (struct jffs2_unknown_node *) get_node_mem((u32)part->offset + offset);
-		if (node->magic == JFFS2_MAGIC_BITMASK && hdr_crc(node)) {
+		buf_len = sizeof(*sm);
+
+		/* Read as much as we want into the _end_ of the preallocated
+		 * buffer
+		 */
+		get_fl_mem(part->offset + sector_ofs + part->sector_size -
+				buf_len, buf_len, buf + buf_size - buf_len);
+
+		sm = (void *)buf + buf_size - sizeof(*sm);
+		if (sm->magic == JFFS2_SUM_MAGIC) {
+			sumlen = part->sector_size - sm->offset;
+			sumptr = buf + buf_size - sumlen;
+
+			/* Now, make sure the summary itself is available */
+			if (sumlen > buf_size) {
+				/* Need to kmalloc for this. */
+				sumptr = malloc(sumlen);
+				if (!sumptr) {
+					putstr("Can't get memory for summary "
+							"node!\n");
+					return 0;
+				}
+				memcpy(sumptr + sumlen - buf_len, buf +
+						buf_size - buf_len, buf_len);
+			}
+			if (buf_len < sumlen) {
+				/* Need to read more so that the entire summary
+				 * node is present
+				 */
+				get_fl_mem(part->offset + sector_ofs +
+						part->sector_size - sumlen,
+						sumlen - buf_len, sumptr);
+			}
+		}
+
+		if (sumptr) {
+			ret = jffs2_sum_scan_sumnode(part, sector_ofs, sumptr,
+					sumlen, pL);
+
+			if (buf_size && sumlen > buf_size)
+				free(sumptr);
+			if (ret < 0)
+				return 0;
+			if (ret)
+				continue;
+
+		}
+
+		buf_len = EMPTY_SCAN_SIZE(part->sector_size);
+
+		get_fl_mem((u32)part->offset + buf_ofs, buf_len, buf);
+
+		/* We temporarily use 'ofs' as a pointer into the buffer/jeb */
+		ofs = 0;
+
+		/* Scan only 4KiB of 0xFF before declaring it's empty */
+		while (ofs < EMPTY_SCAN_SIZE(part->sector_size) &&
+				*(uint32_t *)(&buf[ofs]) == 0xFFFFFFFF)
+			ofs += 4;
+
+		if (ofs == EMPTY_SCAN_SIZE(part->sector_size))
+			continue;
+
+		ofs += sector_ofs;
+		prevofs = ofs - 1;
+
+	scan_more:
+		while (ofs < sector_ofs + part->sector_size) {
+			if (ofs == prevofs) {
+				printf("offset %08x already seen, skip\n", ofs);
+				ofs += 4;
+				counter4++;
+				continue;
+			}
+			prevofs = ofs;
+			if (sector_ofs + part->sector_size <
+					ofs + sizeof(*node))
+				break;
+			if (buf_ofs + buf_len < ofs + sizeof(*node)) {
+				buf_len = min_t(uint32_t, buf_size, sector_ofs
+						+ part->sector_size - ofs);
+				get_fl_mem((u32)part->offset + ofs, buf_len,
+					   buf);
+				buf_ofs = ofs;
+			}
+
+			node = (struct jffs2_unknown_node *)&buf[ofs-buf_ofs];
+
+			if (*(uint32_t *)(&buf[ofs-buf_ofs]) == 0xffffffff) {
+				uint32_t inbuf_ofs;
+				uint32_t empty_start, scan_end;
+
+				empty_start = ofs;
+				ofs += 4;
+				scan_end = min_t(uint32_t, EMPTY_SCAN_SIZE(
+							part->sector_size)/8,
+							buf_len);
+			more_empty:
+				inbuf_ofs = ofs - buf_ofs;
+				while (inbuf_ofs < scan_end) {
+					if (*(uint32_t *)(&buf[inbuf_ofs]) !=
+							0xffffffff)
+						goto scan_more;
+
+					inbuf_ofs += 4;
+					ofs += 4;
+				}
+				/* Ran off end. */
+
+				/* See how much more there is to read in this
+				 * eraseblock...
+				 */
+				buf_len = min_t(uint32_t, buf_size,
+						sector_ofs +
+						part->sector_size - ofs);
+				if (!buf_len) {
+					/* No more to read. Break out of main
+					 * loop without marking this range of
+					 * empty space as dirty (because it's
+					 * not)
+					 */
+					break;
+				}
+				scan_end = buf_len;
+				get_fl_mem((u32)part->offset + ofs, buf_len,
+					   buf);
+				buf_ofs = ofs;
+				goto more_empty;
+			}
+			if (node->magic != JFFS2_MAGIC_BITMASK ||
+					!hdr_crc(node)) {
+				ofs += 4;
+				counter4++;
+				continue;
+			}
+			if (ofs + node->totlen >
+					sector_ofs + part->sector_size) {
+				ofs += 4;
+				counter4++;
+				continue;
+			}
 			/* if its a fragment add it */
-			if (node->nodetype == JFFS2_NODETYPE_INODE &&
-				    inode_crc((struct jffs2_raw_inode *) node) &&
-				    data_crc((struct jffs2_raw_inode *) node)) {
+			switch (node->nodetype) {
+			case JFFS2_NODETYPE_INODE:
+				if (buf_ofs + buf_len < ofs + sizeof(struct
+							jffs2_raw_inode)) {
+					get_fl_mem((u32)part->offset + ofs,
+						   buf_len, buf);
+					buf_ofs = ofs;
+					node = (void *)buf;
+				}
+				if (!inode_crc((struct jffs2_raw_inode *) node))
+				       break;
+
 				if (insert_node(&pL->frag, (u32) part->offset +
-						offset) == NULL) {
-					put_fl_mem(node);
+						ofs) == NULL)
 					return 0;
+				if (max_totlen < node->totlen)
+					max_totlen = node->totlen;
+				break;
+			case JFFS2_NODETYPE_DIRENT:
+				if (buf_ofs + buf_len < ofs + sizeof(struct
+							jffs2_raw_dirent) +
+							((struct
+							 jffs2_raw_dirent *)
+							node)->nsize) {
+					get_fl_mem((u32)part->offset + ofs,
+						   buf_len, buf);
+					buf_ofs = ofs;
+					node = (void *)buf;
 				}
-			} else if (node->nodetype == JFFS2_NODETYPE_DIRENT &&
-				   dirent_crc((struct jffs2_raw_dirent *) node)  &&
-				   dirent_name_crc((struct jffs2_raw_dirent *) node)) {
+
+				if (!dirent_crc((struct jffs2_raw_dirent *)
+							node) ||
+						!dirent_name_crc(
+							(struct
+							 jffs2_raw_dirent *)
+							node))
+					break;
 				if (! (counterN%100))
 					puts ("\b\b.  ");
 				if (insert_node(&pL->dir, (u32) part->offset +
-						offset) == NULL) {
-					put_fl_mem(node);
+						ofs) == NULL)
 					return 0;
-				}
+				if (max_totlen < node->totlen)
+					max_totlen = node->totlen;
 				counterN++;
-			} else if (node->nodetype == JFFS2_NODETYPE_CLEANMARKER) {
+				break;
+			case JFFS2_NODETYPE_CLEANMARKER:
 				if (node->totlen != sizeof(struct jffs2_unknown_node))
 					printf("OOPS Cleanmarker has bad size "
 						"%d != %zu\n",
 						node->totlen,
 						sizeof(struct jffs2_unknown_node));
-			} else if (node->nodetype == JFFS2_NODETYPE_PADDING) {
+				break;
+			case JFFS2_NODETYPE_PADDING:
 				if (node->totlen < sizeof(struct jffs2_unknown_node))
 					printf("OOPS Padding has bad size "
 						"%d < %zu\n",
 						node->totlen,
 						sizeof(struct jffs2_unknown_node));
-			} else {
+				break;
+			case JFFS2_NODETYPE_SUMMARY:
+				break;
+			default:
 				printf("Unknown node type: %x len %d offset 0x%x\n",
 					node->nodetype,
-					node->totlen, offset);
+					node->totlen, ofs);
 			}
-			offset += ((node->totlen + 3) & ~3);
+			ofs += ((node->totlen + 3) & ~3);
 			counterF++;
-		} else if (node->magic == JFFS2_EMPTY_BITMASK &&
-			   node->nodetype == JFFS2_EMPTY_BITMASK) {
-			offset = jffs2_scan_empty(offset, part);
-		} else {	/* if we know nothing, we just step and look. */
-			offset += 4;
-			counter4++;
 		}
-/*             printf("unknown node magic %4.4x %4.4x @ %lx\n", node->magic, node->nodetype, (unsigned long)node); */
-		put_fl_mem(node);
 	}
 
+	free(buf);
 	putstr("\b\b done.\r\n");		/* close off the dots */
+
+	/* We don't care if malloc failed - then each read operation will
+	 * allocate its own buffer as necessary (NAND) or will read directly
+	 * from flash (NOR).
+	 */
+	pL->readbuf = malloc(max_totlen);
+
 	/* turn the lcd back on. */
 	/* splash(); */
 
diff --git a/fs/jffs2/jffs2_nand_1pass.c b/fs/jffs2/jffs2_nand_1pass.c
index e288d5a84..6eb674550 100644
--- a/fs/jffs2/jffs2_nand_1pass.c
+++ b/fs/jffs2/jffs2_nand_1pass.c
@@ -96,7 +96,7 @@ add_node(struct b_list *list, int size)
 static struct b_node *
 insert_node(struct b_list *list, struct b_node *new)
 {
-#ifdef CFG_JFFS2_SORT_FRAGMENTS
+#ifdef CONFIG_SYS_JFFS2_SORT_FRAGMENTS
 	struct b_node *b, *prev;
 
 	if (list->listTail != NULL && list->listCompare(new, list->listTail))
@@ -173,7 +173,7 @@ insert_dirent(struct b_list *list, struct jffs2_raw_dirent *node, u32 offset)
 	return insert_node(list, (struct b_node *)new);
 }
 
-#ifdef CFG_JFFS2_SORT_FRAGMENTS
+#ifdef CONFIG_SYS_JFFS2_SORT_FRAGMENTS
 /* Sort data entries with the latest version last, so that if there
  * is overlapping data the latest version will be used.
  */
@@ -250,7 +250,7 @@ jffs_init_1pass_list(struct part_info *part)
 		pL = (struct b_lists *)part->jffs2_priv;
 
 		memset(pL, 0, sizeof(*pL));
-#ifdef CFG_JFFS2_SORT_FRAGMENTS
+#ifdef CONFIG_SYS_JFFS2_SORT_FRAGMENTS
 		pL->dir.listCompare = compare_dirents;
 		pL->frag.listCompare = compare_inodes;
 #endif
@@ -268,7 +268,7 @@ jffs2_1pass_read_inode(struct b_lists *pL, u32 ino, char *dest,
 	u32 latestVersion = 0;
 	long ret;
 
-#ifdef CFG_JFFS2_SORT_FRAGMENTS
+#ifdef CONFIG_SYS_JFFS2_SORT_FRAGMENTS
 	/* Find file size before loading any data, so fragments that
 	 * start past the end of file can be ignored. A fragment
 	 * that is partially in the file is loaded, so extra data may
@@ -290,7 +290,7 @@ jffs2_1pass_read_inode(struct b_lists *pL, u32 ino, char *dest,
 	for (jNode = (struct b_inode *)pL->frag.listHead; jNode; jNode = jNode->next) {
 		if ((ino != jNode->ino))
 			continue;
-#ifndef CFG_JFFS2_SORT_FRAGMENTS
+#ifndef CONFIG_SYS_JFFS2_SORT_FRAGMENTS
 		/* get actual file length from the newest node */
 		if (jNode->version >= latestVersion) {
 			totalSize = jNode->isize;
diff --git a/fs/jffs2/jffs2_private.h b/fs/jffs2/jffs2_private.h
index 46ed644e4..658b32521 100644
--- a/fs/jffs2/jffs2_private.h
+++ b/fs/jffs2/jffs2_private.h
@@ -7,12 +7,13 @@
 struct b_node {
 	u32 offset;
 	struct b_node *next;
+	enum { CRC_UNKNOWN = 0, CRC_OK, CRC_BAD } datacrc;
 };
 
 struct b_list {
 	struct b_node *listTail;
 	struct b_node *listHead;
-#ifdef CFG_JFFS2_SORT_FRAGMENTS
+#ifdef CONFIG_SYS_JFFS2_SORT_FRAGMENTS
 	struct b_node *listLast;
 	int (*listCompare)(struct b_node *new, struct b_node *node);
 	u32 listLoops;
@@ -24,7 +25,7 @@ struct b_list {
 struct b_lists {
 	struct b_list dir;
 	struct b_list frag;
-
+	void *readbuf;
 };
 
 struct b_compr_info {
diff --git a/fs/jffs2/summary.h b/fs/jffs2/summary.h
new file mode 100644
index 000000000..834933cd1
--- /dev/null
+++ b/fs/jffs2/summary.h
@@ -0,0 +1,163 @@
+/*
+ * JFFS2 -- Journalling Flash File System, Version 2.
+ *
+ * Copyright © 2004  Ferenc Havasi <havasi@inf.u-szeged.hu>,
+ *		     Zoltan Sogor <weth@inf.u-szeged.hu>,
+ *		     Patrik Kluba <pajko@halom.u-szeged.hu>,
+ *		     University of Szeged, Hungary
+ *
+ * For licensing information, see the file 'LICENCE' in this directory.
+ *
+ */
+
+#ifndef JFFS2_SUMMARY_H
+#define JFFS2_SUMMARY_H
+
+#define BLK_STATE_ALLFF		0
+#define BLK_STATE_CLEAN		1
+#define BLK_STATE_PARTDIRTY	2
+#define BLK_STATE_CLEANMARKER	3
+#define BLK_STATE_ALLDIRTY	4
+#define BLK_STATE_BADBLOCK	5
+
+#define JFFS2_SUMMARY_NOSUM_SIZE 0xffffffff
+#define JFFS2_SUMMARY_INODE_SIZE (sizeof(struct jffs2_sum_inode_flash))
+#define JFFS2_SUMMARY_DIRENT_SIZE(x) (sizeof(struct jffs2_sum_dirent_flash) + (x))
+#define JFFS2_SUMMARY_XATTR_SIZE (sizeof(struct jffs2_sum_xattr_flash))
+#define JFFS2_SUMMARY_XREF_SIZE (sizeof(struct jffs2_sum_xref_flash))
+
+/* Summary structures used on flash */
+
+struct jffs2_sum_unknown_flash
+{
+	__u16 nodetype;	/* node type */
+};
+
+struct jffs2_sum_inode_flash
+{
+	__u16 nodetype;	/* node type */
+	__u32 inode;		/* inode number */
+	__u32 version;	/* inode version */
+	__u32 offset;	/* offset on jeb */
+	__u32 totlen; 	/* record length */
+} __attribute__((packed));
+
+struct jffs2_sum_dirent_flash
+{
+	__u16 nodetype;	/* == JFFS_NODETYPE_DIRENT */
+	__u32 totlen;	/* record length */
+	__u32 offset;	/* offset on jeb */
+	__u32 pino;		/* parent inode */
+	__u32 version;	/* dirent version */
+	__u32 ino; 		/* == zero for unlink */
+	uint8_t nsize;		/* dirent name size */
+	uint8_t type;		/* dirent type */
+	uint8_t name[0];	/* dirent name */
+} __attribute__((packed));
+
+struct jffs2_sum_xattr_flash
+{
+	__u16 nodetype;	/* == JFFS2_NODETYPE_XATR */
+	__u32 xid;		/* xattr identifier */
+	__u32 version;	/* version number */
+	__u32 offset;	/* offset on jeb */
+	__u32 totlen;	/* node length */
+} __attribute__((packed));
+
+struct jffs2_sum_xref_flash
+{
+	__u16 nodetype;	/* == JFFS2_NODETYPE_XREF */
+	__u32 offset;	/* offset on jeb */
+} __attribute__((packed));
+
+union jffs2_sum_flash
+{
+	struct jffs2_sum_unknown_flash u;
+	struct jffs2_sum_inode_flash i;
+	struct jffs2_sum_dirent_flash d;
+	struct jffs2_sum_xattr_flash x;
+	struct jffs2_sum_xref_flash r;
+};
+
+/* Summary structures used in the memory */
+
+struct jffs2_sum_unknown_mem
+{
+	union jffs2_sum_mem *next;
+	__u16 nodetype;	/* node type */
+};
+
+struct jffs2_sum_inode_mem
+{
+	union jffs2_sum_mem *next;
+	__u16 nodetype;	/* node type */
+	__u32 inode;		/* inode number */
+	__u32 version;	/* inode version */
+	__u32 offset;	/* offset on jeb */
+	__u32 totlen; 	/* record length */
+} __attribute__((packed));
+
+struct jffs2_sum_dirent_mem
+{
+	union jffs2_sum_mem *next;
+	__u16 nodetype;	/* == JFFS_NODETYPE_DIRENT */
+	__u32 totlen;	/* record length */
+	__u32 offset;	/* ofset on jeb */
+	__u32 pino;		/* parent inode */
+	__u32 version;	/* dirent version */
+	__u32 ino; 		/* == zero for unlink */
+	uint8_t nsize;		/* dirent name size */
+	uint8_t type;		/* dirent type */
+	uint8_t name[0];	/* dirent name */
+} __attribute__((packed));
+
+struct jffs2_sum_xattr_mem
+{
+	union jffs2_sum_mem *next;
+	__u16 nodetype;
+	__u32 xid;
+	__u32 version;
+	__u32 offset;
+	__u32 totlen;
+} __attribute__((packed));
+
+struct jffs2_sum_xref_mem
+{
+	union jffs2_sum_mem *next;
+	__u16 nodetype;
+	__u32 offset;
+} __attribute__((packed));
+
+union jffs2_sum_mem
+{
+	struct jffs2_sum_unknown_mem u;
+	struct jffs2_sum_inode_mem i;
+	struct jffs2_sum_dirent_mem d;
+	struct jffs2_sum_xattr_mem x;
+	struct jffs2_sum_xref_mem r;
+};
+
+/* Summary related information stored in superblock */
+
+struct jffs2_summary
+{
+	uint32_t sum_size;      /* collected summary information for nextblock */
+	uint32_t sum_num;
+	uint32_t sum_padded;
+	union jffs2_sum_mem *sum_list_head;
+	union jffs2_sum_mem *sum_list_tail;
+
+	__u32 *sum_buf;	/* buffer for writing out summary */
+};
+
+/* Summary marker is stored at the end of every sumarized erase block */
+
+struct jffs2_sum_marker
+{
+	__u32 offset;	/* offset of the summary node in the jeb */
+	__u32 magic; 	/* == JFFS2_SUM_MAGIC */
+};
+
+#define JFFS2_SUMMARY_FRAME_SIZE (sizeof(struct jffs2_raw_summary) + sizeof(struct jffs2_sum_marker))
+
+#endif /* JFFS2_SUMMARY_H */
diff --git a/include/.gitignore b/include/.gitignore
index ef7dd5fc8..448141202 100644
--- a/include/.gitignore
+++ b/include/.gitignore
@@ -5,4 +5,5 @@
 /bmp_logo.h
 /config.h
 /config.mk
+/timestamp_autogenerated.h
 /version_autogenerated.h
diff --git a/include/4xx_i2c.h b/include/4xx_i2c.h
index 2df4fbde6..f0e772c05 100644
--- a/include/4xx_i2c.h
+++ b/include/4xx_i2c.h
@@ -43,10 +43,10 @@
 #if defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
     defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
     defined(CONFIG_460EX) || defined(CONFIG_460GT)
-#define I2C_BASE_ADDR	(CFG_PERIPHERAL_BASE + 0x00000700 + I2C_BUS_OFFS)
+#define I2C_BASE_ADDR	(CONFIG_SYS_PERIPHERAL_BASE + 0x00000700 + I2C_BUS_OFFS)
 #elif defined(CONFIG_440) || defined(CONFIG_405EX)
 /* all remaining 440 variants */
-#define I2C_BASE_ADDR	(CFG_PERIPHERAL_BASE + 0x00000400 + I2C_BUS_OFFS)
+#define I2C_BASE_ADDR	(CONFIG_SYS_PERIPHERAL_BASE + 0x00000400 + I2C_BUS_OFFS)
 #else
 /* all 405 variants */
 #define I2C_BASE_ADDR	(0xEF600500 + I2C_BUS_OFFS)
diff --git a/include/addr_map.h b/include/addr_map.h
new file mode 100644
index 000000000..d55f5f64e
--- /dev/null
+++ b/include/addr_map.h
@@ -0,0 +1,29 @@
+#ifndef __ADDR_MAP_H
+#define __ADDR_MAP_H
+
+/*
+ * Copyright 2008 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * Version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <asm/types.h>
+
+extern phys_addr_t addrmap_virt_to_phys(void *vaddr);
+extern unsigned long addrmap_phys_to_virt(phys_addr_t paddr);
+extern void addrmap_set_entry(unsigned long vaddr, phys_addr_t paddr,
+				phys_size_t size, int idx);
+
+#endif
diff --git a/include/altera.h b/include/altera.h
index c03fe87c4..44a1ee563 100644
--- a/include/altera.h
+++ b/include/altera.h
@@ -29,19 +29,19 @@
 
 /* Altera Model definitions
  *********************************************************************/
-#define CFG_ACEX1K		CFG_FPGA_DEV( 0x1 )
-#define CFG_CYCLON2		CFG_FPGA_DEV( 0x2 )
-#define CFG_STRATIX_II		CFG_FPGA_DEV( 0x4 )
+#define CONFIG_SYS_ACEX1K		CONFIG_SYS_FPGA_DEV( 0x1 )
+#define CONFIG_SYS_CYCLON2		CONFIG_SYS_FPGA_DEV( 0x2 )
+#define CONFIG_SYS_STRATIX_II		CONFIG_SYS_FPGA_DEV( 0x4 )
 
-#define CFG_ALTERA_ACEX1K	(CFG_FPGA_ALTERA | CFG_ACEX1K)
-#define CFG_ALTERA_CYCLON2	(CFG_FPGA_ALTERA | CFG_CYCLON2)
-#define CFG_ALTERA_STRATIX_II	(CFG_FPGA_ALTERA | CFG_STRATIX_II)
+#define CONFIG_SYS_ALTERA_ACEX1K	(CONFIG_SYS_FPGA_ALTERA | CONFIG_SYS_ACEX1K)
+#define CONFIG_SYS_ALTERA_CYCLON2	(CONFIG_SYS_FPGA_ALTERA | CONFIG_SYS_CYCLON2)
+#define CONFIG_SYS_ALTERA_STRATIX_II	(CONFIG_SYS_FPGA_ALTERA | CONFIG_SYS_STRATIX_II)
 /* Add new models here */
 
 /* Altera Interface definitions
  *********************************************************************/
-#define CFG_ALTERA_IF_PS	CFG_FPGA_IF( 0x1 )	/* passive serial */
-#define CFG_ALTERA_IF_FPP	CFG_FPGA_IF( 0x2 )	/* fast passive parallel */
+#define CONFIG_SYS_ALTERA_IF_PS	CONFIG_SYS_FPGA_IF( 0x1 )	/* passive serial */
+#define CONFIG_SYS_ALTERA_IF_FPP	CONFIG_SYS_FPGA_IF( 0x2 )	/* fast passive parallel */
 /* Add new interfaces here */
 
 typedef enum {				/* typedef Altera_iface */
diff --git a/include/api_public.h b/include/api_public.h
index 5b0c09e31..d3164f69c 100644
--- a/include/api_public.h
+++ b/include/api_public.h
@@ -110,8 +110,8 @@ struct sys_info {
 	int			mr_no;	/* number of memory regions */
 };
 
-#undef CFG_64BIT_LBA
-#ifdef CFG_64BIT_LBA
+#undef CONFIG_SYS_64BIT_LBA
+#ifdef CONFIG_SYS_64BIT_LBA
 typedef	u_int64_t lbasize_t;
 #else
 typedef unsigned long lbasize_t;
diff --git a/include/asm-arm/arch-at91/gpio.h b/include/asm-arm/arch-at91/gpio.h
index c4d7b971b..e2d375b34 100644
--- a/include/asm-arm/arch-at91/gpio.h
+++ b/include/asm-arm/arch-at91/gpio.h
@@ -16,6 +16,7 @@
 #include <asm/io.h>
 #include <asm/errno.h>
 #include <asm/arch/at91_pio.h>
+#include <asm/arch/hardware.h>
 
 #define PIN_BASE		32
 
diff --git a/include/asm-arm/arch-at91/hardware.h b/include/asm-arm/arch-at91/hardware.h
index f31241901..b881e4e2e 100644
--- a/include/asm-arm/arch-at91/hardware.h
+++ b/include/asm-arm/arch-at91/hardware.h
@@ -20,7 +20,6 @@
 #include <asm/arch/at91rm9200.h>
 #elif defined(CONFIG_AT91SAM9260)
 #include <asm/arch/at91sam9260.h>
-#define AT91_BASE_EMAC	AT91SAM9260_BASE_EMAC
 #define AT91_BASE_SPI	AT91SAM9260_BASE_SPI0
 #define AT91_ID_UHP	AT91SAM9260_ID_UHP
 #define AT91_PMC_UHP	AT91SAM926x_PMC_UHP
@@ -31,7 +30,6 @@
 #define AT91_PMC_UHP	AT91SAM926x_PMC_UHP
 #elif defined(CONFIG_AT91SAM9263)
 #include <asm/arch/at91sam9263.h>
-#define AT91_BASE_EMAC	AT91SAM9263_BASE_EMAC
 #define AT91_BASE_SPI	AT91SAM9263_BASE_SPI0
 #define AT91_ID_UHP	AT91SAM9263_ID_UHP
 #define AT91_PMC_UHP	AT91SAM926x_PMC_UHP
@@ -41,7 +39,6 @@
 #define AT91_ID_UHP	AT91SAM9RL_ID_UHP
 #elif defined(CONFIG_AT91CAP9)
 #include <asm/arch/at91cap9.h>
-#define AT91_BASE_EMAC	AT91CAP9_BASE_EMAC
 #define AT91_BASE_SPI	AT91CAP9_BASE_SPI0
 #define AT91_ID_UHP	AT91CAP9_ID_UHP
 #define AT91_PMC_UHP	AT91CAP9_PMC_UHP
diff --git a/include/asm-arm/arch-davinci/nand_defs.h b/include/asm-arm/arch-davinci/nand_defs.h
index 619bd4797..187d3c343 100644
--- a/include/asm-arm/arch-davinci/nand_defs.h
+++ b/include/asm-arm/arch-davinci/nand_defs.h
@@ -31,9 +31,9 @@
 #define	MASK_CLE	0x10
 #define	MASK_ALE	0x0a
 
-#define NAND_CE0CLE	((volatile u_int8_t *)(CFG_NAND_BASE + 0x10))
-#define NAND_CE0ALE	((volatile u_int8_t *)(CFG_NAND_BASE + 0x0a))
-#define NAND_CE0DATA	((volatile u_int8_t *)CFG_NAND_BASE)
+#define NAND_CE0CLE	((volatile u_int8_t *)(CONFIG_SYS_NAND_BASE + 0x10))
+#define NAND_CE0ALE	((volatile u_int8_t *)(CONFIG_SYS_NAND_BASE + 0x0a))
+#define NAND_CE0DATA	((volatile u_int8_t *)CONFIG_SYS_NAND_BASE)
 
 typedef struct  {
 	u_int32_t	NRCSR;
@@ -89,7 +89,7 @@ typedef volatile nand_registers	*nandregs;
 #define NAND_READ_END		0x30
 #define NAND_STATUS		0x70
 
-#ifdef CFG_NAND_HW_ECC
+#ifdef CONFIG_SYS_NAND_HW_ECC
 #define NAND_Ecc_P1e		(1 << 0)
 #define NAND_Ecc_P2e		(1 << 1)
 #define NAND_Ecc_P4e		(1 << 2)
diff --git a/include/asm-arm/arch-omap24xx/mem.h b/include/asm-arm/arch-omap24xx/mem.h
index c81f1c437..42e8ab2bc 100644
--- a/include/asm-arm/arch-omap24xx/mem.h
+++ b/include/asm-arm/arch-omap24xx/mem.h
@@ -103,7 +103,7 @@ typedef enum {
 
 /* GPMC settings */
 #ifdef PRCM_CONFIG_II	     /* L3 at 100MHz */
-# ifdef CFG_NAND_BOOT
+# ifdef CONFIG_SYS_NAND_BOOT
 #  define H4_24XX_GPMC_CONFIG1_0   0x0
 #  define H4_24XX_GPMC_CONFIG2_0   0x00141400
 #  define H4_24XX_GPMC_CONFIG3_0   0x00141400
@@ -116,7 +116,7 @@ typedef enum {
 #  define H4_24XX_GPMC_CONFIG3_0   0x00050502
 #  define H4_24XX_GPMC_CONFIG4_0   0x0C060C06
 #  define H4_24XX_GPMC_CONFIG5_0   0x01131F1F
-# endif /* endif CFG_NAND_BOOT */
+# endif /* endif CONFIG_SYS_NAND_BOOT */
 # define H4_24XX_GPMC_CONFIG7_0	  (0x00000C40|(H4_CS0_BASE >> 24))
 # define H4_24XX_GPMC_CONFIG1_1	  0x00011000
 # define H4_24XX_GPMC_CONFIG2_1	  0x001F1F00
@@ -128,7 +128,7 @@ typedef enum {
 #endif /* endif PRCM_CONFIG_II */
 
 #ifdef PRCM_CONFIG_III	/* L3 at 133MHz */
-# ifdef CFG_NAND_BOOT
+# ifdef CONFIG_SYS_NAND_BOOT
 #  define H4_24XX_GPMC_CONFIG1_0   0x0
 #  define H4_24XX_GPMC_CONFIG2_0   0x00141400
 #  define H4_24XX_GPMC_CONFIG3_0   0x00141400
@@ -142,7 +142,7 @@ typedef enum {
 #  define H4_24XX_GPMC_CONFIG4_0   0x10081008
 #  define H4_24XX_GPMC_CONFIG5_0   0x01131F1F
 #  define H4_24XX_GPMC_CONFIG6_0   0x000004c4
-# endif /* endif CFG_NAND_BOOT */
+# endif /* endif CONFIG_SYS_NAND_BOOT */
 # define H4_24XX_GPMC_CONFIG7_0	  (0x00000C40|(H4_CS0_BASE >> 24))
 # define H4_24XX_GPMC_CONFIG1_1	  0x00011000
 # define H4_24XX_GPMC_CONFIG2_1	  0x001f1f01
@@ -151,6 +151,6 @@ typedef enum {
 # define H4_24XX_GPMC_CONFIG5_1	  0x041f1F1F
 # define H4_24XX_GPMC_CONFIG6_1	  0x000004C4
 # define H4_24XX_GPMC_CONFIG7_1	  (0x00000F40|(H4_CS1_BASE >> 24))
-#endif /* endif CFG_PRCM_III */
+#endif /* endif CONFIG_SYS_PRCM_III */
 
 #endif /* endif _OMAP24XX_MEM_H_ */
diff --git a/include/asm-arm/global_data.h b/include/asm-arm/global_data.h
index 7e2a53adb..5c56ce328 100644
--- a/include/asm-arm/global_data.h
+++ b/include/asm-arm/global_data.h
@@ -30,7 +30,7 @@
  * global variables during system initialization (until we have set
  * up the memory controller so that we can use RAM).
  *
- * Keep it *SMALL* and remember to set CFG_GBL_DATA_SIZE > sizeof(gd_t)
+ * Keep it *SMALL* and remember to set CONFIG_SYS_GBL_DATA_SIZE > sizeof(gd_t)
  */
 
 typedef	struct	global_data {
@@ -63,6 +63,7 @@ typedef	struct	global_data {
 #define	GD_FLG_POSTFAIL	0x00008		/* Critical POST test failed		*/
 #define	GD_FLG_POSTSTOP	0x00010		/* POST seqeunce aborted		*/
 #define	GD_FLG_LOGINIT	0x00020		/* Log Buffer has been initialized	*/
+#define GD_FLG_DISABLE_CONSOLE	0x00040		/* Disable console (in & out)	 */
 
 #define DECLARE_GLOBAL_DATA_PTR     register volatile gd_t *gd asm ("r8")
 
diff --git a/include/asm-arm/io.h b/include/asm-arm/io.h
index f4ae30700..fec3a7eac 100644
--- a/include/asm-arm/io.h
+++ b/include/asm-arm/io.h
@@ -57,6 +57,11 @@ static inline void unmap_physmem(void *vaddr, unsigned long flags)
 
 }
 
+static inline phys_addr_t virt_to_phys(void * vaddr)
+{
+	return (phys_addr_t)(vaddr);
+}
+
 /*
  * Generic virtual read/write.  Note that we don't support half-word
  * read/writes.  We define __arch_*[bl] here, and leave __arch_*w
diff --git a/include/asm-arm/mach-types.h b/include/asm-arm/mach-types.h
index b347857c9..ce6d25f9e 100644
--- a/include/asm-arm/mach-types.h
+++ b/include/asm-arm/mach-types.h
@@ -377,12 +377,13 @@ extern unsigned int __machine_arch_type;
 #define MACH_TYPE_SE4000               364
 #define MACH_TYPE_QUADRICEPS           365
 #define MACH_TYPE_BRONCO               366
+#define MACH_TYPE_ESL_WIRELESS_TAB     367
 #define MACH_TYPE_ESL_SOFCOMP          368
 #define MACH_TYPE_S5C7375              369
 #define MACH_TYPE_SPEARHEAD            370
 #define MACH_TYPE_PANTERA              371
 #define MACH_TYPE_PRAYOGLITE           372
-#define MACH_TYPE_GUMSTIK              373
+#define MACH_TYPE_GUMSTIX              373
 #define MACH_TYPE_RCUBE                374
 #define MACH_TYPE_REA_OLV              375
 #define MACH_TYPE_PXA_IPHONE           376
@@ -555,7 +556,6 @@ extern unsigned int __machine_arch_type;
 #define MACH_TYPE_BOXER                544
 #define MACH_TYPE_SHEPHERD             545
 #define MACH_TYPE_AML42800AA           546
-#define MACH_TYPE_MACH_TYPE_ML674001   547
 #define MACH_TYPE_LPC2294              548
 #define MACH_TYPE_SWITCHGRASS          549
 #define MACH_TYPE_ENS_CMU              550
@@ -743,7 +743,6 @@ extern unsigned int __machine_arch_type;
 #define MACH_TYPE_ITE8152              735
 #define MACH_TYPE_LPC3XXX              736
 #define MACH_TYPE_PUPPETEER            737
-#define MACH_TYPE_MACH_VADATECH        738
 #define MACH_TYPE_E570                 739
 #define MACH_TYPE_X50                  740
 #define MACH_TYPE_RECON                741
@@ -834,13 +833,13 @@ extern unsigned int __machine_arch_type;
 #define MACH_TYPE_OMAP_GSAMPLE         826
 #define MACH_TYPE_REALVIEW_EB          827
 #define MACH_TYPE_SAMOA                828
-#define MACH_TYPE_T3XSCALE             829
+#define MACH_TYPE_PALMT3               829
 #define MACH_TYPE_I878                 830
 #define MACH_TYPE_BORZOI               831
 #define MACH_TYPE_GECKO                832
 #define MACH_TYPE_DS101                833
 #define MACH_TYPE_OMAP_PALMTT2         834
-#define MACH_TYPE_XSCALE_PALMLD        835
+#define MACH_TYPE_PALMLD               835
 #define MACH_TYPE_CC9C                 836
 #define MACH_TYPE_SBC1670              837
 #define MACH_TYPE_IXDP28X5             838
@@ -849,7 +848,7 @@ extern unsigned int __machine_arch_type;
 #define MACH_TYPE_ARCOM_ZEUS           841
 #define MACH_TYPE_OSIRIS               842
 #define MACH_TYPE_MAESTRO              843
-#define MACH_TYPE_TUNGE2               844
+#define MACH_TYPE_PALMTE2              844
 #define MACH_TYPE_IXBBM                845
 #define MACH_TYPE_MX27ADS              846
 #define MACH_TYPE_AX8004               847
@@ -890,7 +889,7 @@ extern unsigned int __machine_arch_type;
 #define MACH_TYPE_OMI_BOARD            882
 #define MACH_TYPE_MX21CIV              883
 #define MACH_TYPE_MAHI_CDAC            884
-#define MACH_TYPE_XSCALE_PALMTX        885
+#define MACH_TYPE_PALMTX               885
 #define MACH_TYPE_S3C2413              887
 #define MACH_TYPE_SAMSYS_EP0           888
 #define MACH_TYPE_WG302V1              889
@@ -913,7 +912,7 @@ extern unsigned int __machine_arch_type;
 #define MACH_TYPE_APF9328              906
 #define MACH_TYPE_OMAP_WIPOQ           907
 #define MACH_TYPE_OMAP_TWIP            908
-#define MACH_TYPE_XSCALE_PALMTREO650   909
+#define MACH_TYPE_PALMT650             909
 #define MACH_TYPE_ACUMEN               910
 #define MACH_TYPE_XP100                911
 #define MACH_TYPE_FS2410               912
@@ -921,8 +920,8 @@ extern unsigned int __machine_arch_type;
 #define MACH_TYPE_SQ2FTLPALM           914
 #define MACH_TYPE_BSEMSERVER           915
 #define MACH_TYPE_NETCLIENT            916
-#define MACH_TYPE_XSCALE_PALMTT5       917
-#define MACH_TYPE_OMAP_PALMTC          918
+#define MACH_TYPE_PALMT5               917
+#define MACH_TYPE_PALMTC               918
 #define MACH_TYPE_OMAP_APOLLON         919
 #define MACH_TYPE_MXC30030EVB          920
 #define MACH_TYPE_REA_2D               921
@@ -1093,7 +1092,7 @@ extern unsigned int __machine_arch_type;
 #define MACH_TYPE_MULTMDW              1087
 #define MACH_TYPE_MBA2440              1088
 #define MACH_TYPE_ECSD                 1089
-#define MACH_TYPE_ZIRE31               1090
+#define MACH_TYPE_PALMZ31              1090
 #define MACH_TYPE_FSG                  1091
 #define MACH_TYPE_RAZOR101             1092
 #define MACH_TYPE_OPERA_TDM            1093
@@ -1215,7 +1214,6 @@ extern unsigned int __machine_arch_type;
 #define MACH_TYPE_EM7210               1212
 #define MACH_TYPE_HTCHERMES            1213
 #define MACH_TYPE_ETI_C1               1214
-#define MACH_TYPE_MACH_DEP2410         1215
 #define MACH_TYPE_AC100                1216
 #define MACH_TYPE_SNEETCH              1217
 #define MACH_TYPE_STUDENTMATE          1218
@@ -1416,10 +1414,10 @@ extern unsigned int __machine_arch_type;
 #define MACH_TYPE_CNTY_TITAN           1418
 #define MACH_TYPE_APP3XX               1419
 #define MACH_TYPE_SIDEOATSGRAMA        1420
-#define MACH_TYPE_XSCALE_PALMT700P     1421
-#define MACH_TYPE_XSCALE_PALMT700W     1422
-#define MACH_TYPE_XSCALE_PALMT750      1423
-#define MACH_TYPE_XSCALE_PALMT755P     1424
+#define MACH_TYPE_PALMTREO700P         1421
+#define MACH_TYPE_PALMTREO700W         1422
+#define MACH_TYPE_PALMTREO750          1423
+#define MACH_TYPE_PALMTREO755P         1424
 #define MACH_TYPE_EZREGANUT9200        1425
 #define MACH_TYPE_SARGE                1426
 #define MACH_TYPE_A696                 1427
@@ -1458,7 +1456,7 @@ extern unsigned int __machine_arch_type;
 #define MACH_TYPE_HTCTITAN             1463
 #define MACH_TYPE_QRANIUM              1464
 #define MACH_TYPE_ADX_WSC2             1465
-#define MACH_TYPE_ADX_MEDINET          1466
+#define MACH_TYPE_ADX_MEDCOM           1466
 #define MACH_TYPE_BBOARD               1467
 #define MACH_TYPE_CAMBRIA              1468
 #define MACH_TYPE_MT7XXX               1469
@@ -1514,7 +1512,7 @@ extern unsigned int __machine_arch_type;
 #define MACH_TYPE_CORSICA              1519
 #define MACH_TYPE_BIGEYE               1520
 #define MACH_TYPE_TLL5000              1522
-#define MACH_TYPE_HNI_X270             1523
+#define MACH_TYPE_BEBOT                1523
 #define MACH_TYPE_QONG                 1524
 #define MACH_TYPE_TCOMPACT             1525
 #define MACH_TYPE_PUMA5                1526
@@ -1595,7 +1593,270 @@ extern unsigned int __machine_arch_type;
 #define MACH_TYPE_P300                 1602
 #define MACH_TYPE_XDACOMET             1603
 #define MACH_TYPE_DEXFLEX2             1604
+#define MACH_TYPE_OW                   1605
+#define MACH_TYPE_ARMEBS3              1606
+#define MACH_TYPE_U3                   1607
+#define MACH_TYPE_SMDK2450             1608
+#define MACH_TYPE_RSI_EWS              1609
+#define MACH_TYPE_TNB                  1610
+#define MACH_TYPE_TOEPATH              1611
+#define MACH_TYPE_KB9263               1612
+#define MACH_TYPE_MT7108               1613
+#define MACH_TYPE_SMTR2440             1614
+#define MACH_TYPE_MANAO                1615
+#define MACH_TYPE_CM_X300              1616
+#define MACH_TYPE_GULFSTREAM_KP        1617
+#define MACH_TYPE_LANREADYFN522        1618
+#define MACH_TYPE_ARMA37               1619
+#define MACH_TYPE_MENDEL               1620
+#define MACH_TYPE_PELCO_ILIAD          1621
+#define MACH_TYPE_UNIT2P               1622
+#define MACH_TYPE_INC20OTTER           1623
+#define MACH_TYPE_AT91SAM9G20EK        1624
+#define MACH_TYPE_STORCENTER           1625
+#define MACH_TYPE_SMDK6410             1626
+#define MACH_TYPE_U300                 1627
+#define MACH_TYPE_U500                 1628
+#define MACH_TYPE_DS9260               1629
+#define MACH_TYPE_RIVERROCK            1630
+#define MACH_TYPE_SCIBATH              1631
+#define MACH_TYPE_AT91SAM7SE512EK      1632
+#define MACH_TYPE_WRT350N_V2           1633
+#define MACH_TYPE_MULTIMEDIA           1634
+#define MACH_TYPE_MARVIN               1635
+#define MACH_TYPE_X500                 1636
+#define MACH_TYPE_AWLUG4LCU            1637
+#define MACH_TYPE_PALERMOC             1638
+#define MACH_TYPE_OMAP_LDP             1639
+#define MACH_TYPE_IP500                1640
+#define MACH_TYPE_ASE2                 1642
+#define MACH_TYPE_MX35EVB              1643
+#define MACH_TYPE_AML_M8050            1644
+#define MACH_TYPE_MX35_3DS             1645
+#define MACH_TYPE_MARS                 1646
+#define MACH_TYPE_NTOSD_644XA          1647
+#define MACH_TYPE_BADGER               1648
+#define MACH_TYPE_TRIZEPS4WL           1649
+#define MACH_TYPE_TRIZEPS5             1650
+#define MACH_TYPE_MARLIN               1651
+#define MACH_TYPE_TS78XX               1652
+#define MACH_TYPE_HPIPAQ214            1653
+#define MACH_TYPE_AT572D940DCM         1654
+#define MACH_TYPE_NE1BOARD             1655
+#define MACH_TYPE_ZANTE                1656
 #define MACH_TYPE_SFFSDR               1657
+#define MACH_TYPE_TW2662               1658
+#define MACH_TYPE_VF10XX               1659
+#define MACH_TYPE_ZORAN43XX            1660
+#define MACH_TYPE_SONIX926             1661
+#define MACH_TYPE_CELESTIALSEMI        1662
+#define MACH_TYPE_CC9M2443             1663
+#define MACH_TYPE_TW5334               1664
+#define MACH_TYPE_HTCARTEMIS           1665
+#define MACH_TYPE_NAL_HLITE            1666
+#define MACH_TYPE_HTCVOGUE             1667
+#define MACH_TYPE_SMARTWEB             1668
+#define MACH_TYPE_MV86XX               1669
+#define MACH_TYPE_MV87XX               1670
+#define MACH_TYPE_SONGYOUNGHO          1671
+#define MACH_TYPE_YOUNGHOTEMA          1672
+#define MACH_TYPE_PCM037               1673
+#define MACH_TYPE_MMVP                 1674
+#define MACH_TYPE_MMAP                 1675
+#define MACH_TYPE_PTID2410             1676
+#define MACH_TYPE_JAMES_926            1677
+#define MACH_TYPE_FM6000               1678
+#define MACH_TYPE_DB88F6281_BP         1680
+#define MACH_TYPE_RD88F6192_NAS        1681
+#define MACH_TYPE_RD88F6281            1682
+#define MACH_TYPE_DB78X00_BP           1683
+#define MACH_TYPE_SMDK2416             1685
+#define MACH_TYPE_OCE_SPIDER_SI        1686
+#define MACH_TYPE_OCE_SPIDER_SK        1687
+#define MACH_TYPE_ROVERN6              1688
+#define MACH_TYPE_PELCO_EVOLUTION      1689
+#define MACH_TYPE_WBD111               1690
+#define MACH_TYPE_ELARACPE             1691
+#define MACH_TYPE_MABV3                1692
+#define MACH_TYPE_MV2120               1693
+#define MACH_TYPE_CSB737               1695
+#define MACH_TYPE_MX51_3DS             1696
+#define MACH_TYPE_G900                 1697
+#define MACH_TYPE_APF27                1698
+#define MACH_TYPE_GGUS2000             1699
+#define MACH_TYPE_OMAP_2430_MIMIC      1700
+#define MACH_TYPE_IMX27LITE            1701
+#define MACH_TYPE_ALMEX                1702
+#define MACH_TYPE_CONTROL              1703
+#define MACH_TYPE_MBA2410              1704
+#define MACH_TYPE_VOLCANO              1705
+#define MACH_TYPE_ZENITH               1706
+#define MACH_TYPE_MUCHIP               1707
+#define MACH_TYPE_MAGELLAN             1708
+#define MACH_TYPE_USB_A9260            1709
+#define MACH_TYPE_USB_A9263            1710
+#define MACH_TYPE_QIL_A9260            1711
+#define MACH_TYPE_CME9210              1712
+#define MACH_TYPE_HCZH4                1713
+#define MACH_TYPE_SPEARBASIC           1714
+#define MACH_TYPE_DEP2440              1715
+#define MACH_TYPE_HDL_GXR              1716
+#define MACH_TYPE_HDL_GT               1717
+#define MACH_TYPE_HDL_4G               1718
+#define MACH_TYPE_S3C6000              1719
+#define MACH_TYPE_MMSP2_MDK            1720
+#define MACH_TYPE_MPX220               1721
+#define MACH_TYPE_KZM_ARM11_01         1722
+#define MACH_TYPE_HTC_POLARIS          1723
+#define MACH_TYPE_HTC_KAISER           1724
+#define MACH_TYPE_LG_KS20              1725
+#define MACH_TYPE_HHGPS                1726
+#define MACH_TYPE_NOKIA_N810_WIMAX     1727
+#define MACH_TYPE_INSIGHT              1728
+#define MACH_TYPE_SAPPHIRE             1729
+#define MACH_TYPE_CSB637XO             1730
+#define MACH_TYPE_EVISIONG             1731
+#define MACH_TYPE_STMP37XX             1732
+#define MACH_TYPE_STMP38XX             1733
+#define MACH_TYPE_TNT                  1734
+#define MACH_TYPE_TBXT                 1735
+#define MACH_TYPE_PLAYMATE             1736
+#define MACH_TYPE_PNS10                1737
+#define MACH_TYPE_EZNAVI               1738
+#define MACH_TYPE_PS4000               1739
+#define MACH_TYPE_EZX_A780             1740
+#define MACH_TYPE_EZX_E680             1741
+#define MACH_TYPE_EZX_A1200            1742
+#define MACH_TYPE_EZX_E6               1743
+#define MACH_TYPE_EZX_E2               1744
+#define MACH_TYPE_EZX_A910             1745
+#define MACH_TYPE_CWMX31               1746
+#define MACH_TYPE_SL2312               1747
+#define MACH_TYPE_BLENNY               1748
+#define MACH_TYPE_DS107                1749
+#define MACH_TYPE_DSX07                1750
+#define MACH_TYPE_PICOCOM1             1751
+#define MACH_TYPE_LYNX_WOLVERINE       1752
+#define MACH_TYPE_UBISYS_P9_SC19       1753
+#define MACH_TYPE_KRATOS_LOW           1754
+#define MACH_TYPE_M700                 1755
+#define MACH_TYPE_EDMINI_V2            1756
+#define MACH_TYPE_ZIPIT2               1757
+#define MACH_TYPE_HSLFEMTOCELL         1758
+#define MACH_TYPE_DAINTREE_AT91        1759
+#define MACH_TYPE_SG560USB             1760
+#define MACH_TYPE_OMAP3_PANDORA        1761
+#define MACH_TYPE_USR8200              1762
+#define MACH_TYPE_S1S65K               1763
+#define MACH_TYPE_S2S65A               1764
+#define MACH_TYPE_ICORE                1765
+#define MACH_TYPE_MSS2                 1766
+#define MACH_TYPE_BELMONT              1767
+#define MACH_TYPE_ASUSP525             1768
+#define MACH_TYPE_LB88RC8480           1769
+#define MACH_TYPE_HIPXA                1770
+#define MACH_TYPE_MX25_3DS             1771
+#define MACH_TYPE_M800                 1772
+#define MACH_TYPE_OMAP3530_LV_SOM      1773
+#define MACH_TYPE_PRIMA_EVB            1774
+#define MACH_TYPE_MX31BT1              1775
+#define MACH_TYPE_ATLAS4_EVB           1776
+#define MACH_TYPE_MX31CICADA           1777
+#define MACH_TYPE_MI424WR              1778
+#define MACH_TYPE_AXS_ULTRAX           1779
+#define MACH_TYPE_AT572D940DEB         1780
+#define MACH_TYPE_DAVINCI_DA8XX_EVM    1781
+#define MACH_TYPE_EP9302               1782
+#define MACH_TYPE_AT572D940HFEB        1783
+#define MACH_TYPE_CYBOOK3              1784
+#define MACH_TYPE_WDG002               1785
+#define MACH_TYPE_SG560ADSL            1786
+#define MACH_TYPE_NEXTIO_N2800_ICA     1787
+#define MACH_TYPE_MARVELL_NEWDB        1789
+#define MACH_TYPE_VANDIHUD             1790
+#define MACH_TYPE_MAGX_E8              1791
+#define MACH_TYPE_MAGX_Z6              1792
+#define MACH_TYPE_MAGX_V8              1793
+#define MACH_TYPE_MAGX_U9              1794
+#define MACH_TYPE_TOUGHCF08            1795
+#define MACH_TYPE_ZW4400               1796
+#define MACH_TYPE_MARAT91              1797
+#define MACH_TYPE_OVERO                1798
+#define MACH_TYPE_AT2440EVB            1799
+#define MACH_TYPE_NEOCORE926           1800
+#define MACH_TYPE_WNR854T              1801
+#define MACH_TYPE_IMX27                1802
+#define MACH_TYPE_MOOSE_DB             1803
+#define MACH_TYPE_FAB4                 1804
+#define MACH_TYPE_HTCDIAMOND           1805
+#define MACH_TYPE_FIONA                1806
+#define MACH_TYPE_MXC30030_X           1807
+#define MACH_TYPE_BMP1000              1808
+#define MACH_TYPE_LOGI9200             1809
+#define MACH_TYPE_TQMA31               1810
+#define MACH_TYPE_CCW9P9215JS          1811
+#define MACH_TYPE_RD88F5181L_GE        1812
+#define MACH_TYPE_SIFMAIN              1813
+#define MACH_TYPE_SAM9_L9261           1814
+#define MACH_TYPE_CC9M2443JS           1815
+#define MACH_TYPE_XARIA300             1816
+#define MACH_TYPE_IT9200               1817
+#define MACH_TYPE_RD88F5181L_FXO       1818
+#define MACH_TYPE_KRISS_SENSOR         1819
+#define MACH_TYPE_PILZ_PMI5            1820
+#define MACH_TYPE_JADE                 1821
+#define MACH_TYPE_KS8695_SOFTPLC       1822
+#define MACH_TYPE_GPRISC4              1823
+#define MACH_TYPE_STAMP9260            1824
+#define MACH_TYPE_SMDK6430             1825
+#define MACH_TYPE_SMDKC100             1826
+#define MACH_TYPE_TAVOREVB             1827
+#define MACH_TYPE_SAAR                 1828
+#define MACH_TYPE_DEISTER_EYECAM       1829
+#define MACH_TYPE_AT91SAM9M10EK        1830
+#define MACH_TYPE_LINKSTATION_PRODUO   1831
+#define MACH_TYPE_HIT_B0               1832
+#define MACH_TYPE_ADX_RMU              1833
+#define MACH_TYPE_XG_CPE_MAIN          1834
+#define MACH_TYPE_EDB9407A             1835
+#define MACH_TYPE_DTB9608              1836
+#define MACH_TYPE_EM104V1              1837
+#define MACH_TYPE_DEMO                 1838
+#define MACH_TYPE_LOGI9260             1839
+#define MACH_TYPE_MX31_EXM32           1840
+#define MACH_TYPE_USB_A9G20            1841
+#define MACH_TYPE_PICPROJE2008         1842
+#define MACH_TYPE_CS_E9315             1843
+#define MACH_TYPE_QIL_A9G20            1844
+#define MACH_TYPE_SHA_PON020           1845
+#define MACH_TYPE_NAD                  1846
+#define MACH_TYPE_SBC35_A9260          1847
+#define MACH_TYPE_SBC35_A9G20          1848
+#define MACH_TYPE_DAVINCI_BEGINNING    1849
+#define MACH_TYPE_UWC                  1850
+#define MACH_TYPE_MXLADS               1851
+#define MACH_TYPE_HTCNIKE              1852
+#define MACH_TYPE_DEISTER_PXA270       1853
+#define MACH_TYPE_CME9210JS            1854
+#define MACH_TYPE_CC9P9360             1855
+#define MACH_TYPE_MOCHA                1856
+#define MACH_TYPE_WAPD170AG            1857
+#define MACH_TYPE_LINKSTATION_MINI     1858
+#define MACH_TYPE_AFEB9260             1859
+#define MACH_TYPE_W90X900              1860
+#define MACH_TYPE_W90X700              1861
+#define MACH_TYPE_KT300IP              1862
+#define MACH_TYPE_KT300IP_G20          1863
+#define MACH_TYPE_SRCM                 1864
+#define MACH_TYPE_WLNX_9260            1865
+#define MACH_TYPE_OPENMOKO_GTA03       1866
+#define MACH_TYPE_OSPREY2              1867
+#define MACH_TYPE_KBIO9260             1868
+#define MACH_TYPE_GINZA                1869
+#define MACH_TYPE_A636N                1870
+#define MACH_TYPE_IMX27IPCAM           1871
+#define MACH_TYPE_NEMOC                1872
+#define MACH_TYPE_GENEVA               1873
 
 #ifdef CONFIG_ARCH_EBSA110
 # ifdef machine_arch_type
@@ -5977,6 +6238,18 @@ extern unsigned int __machine_arch_type;
 # define machine_is_bronco()	(0)
 #endif
 
+#ifdef CONFIG_ARCH_ESL_WIRELESS_TAB
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_ESL_WIRELESS_TAB
+# endif
+# define machine_is_esl_wireless_tab()	(machine_arch_type == MACH_TYPE_ESL_WIRELESS_TAB)
+#else
+# define machine_is_esl_wireless_tab()	(0)
+#endif
+
 #ifdef CONFIG_ARCH_ESL_SOFCOMP
 # ifdef machine_arch_type
 #  undef machine_arch_type
@@ -6037,14 +6310,14 @@ extern unsigned int __machine_arch_type;
 # define machine_is_prayoglite()	(0)
 #endif
 
-#ifdef CONFIG_ARCH_GUMSTIK
+#ifdef CONFIG_ARCH_GUMSTIX
 # ifdef machine_arch_type
 #  undef machine_arch_type
 #  define machine_arch_type	__machine_arch_type
 # else
-#  define machine_arch_type	MACH_TYPE_GUMSTIK
+#  define machine_arch_type	MACH_TYPE_GUMSTIX
 # endif
-# define machine_is_gumstix()	(machine_arch_type == MACH_TYPE_GUMSTIK)
+# define machine_is_gumstix()	(machine_arch_type == MACH_TYPE_GUMSTIX)
 #else
 # define machine_is_gumstix()	(0)
 #endif
@@ -8113,18 +8386,6 @@ extern unsigned int __machine_arch_type;
 # define machine_is_aml42800aa()	(0)
 #endif
 
-#ifdef CONFIG_MACH_MACH_TYPE_ML674001
-# ifdef machine_arch_type
-#  undef machine_arch_type
-#  define machine_arch_type	__machine_arch_type
-# else
-#  define machine_arch_type	MACH_TYPE_MACH_TYPE_ML674001
-# endif
-# define machine_is_ml674001()	(machine_arch_type == MACH_TYPE_MACH_TYPE_ML674001)
-#else
-# define machine_is_ml674001()	(0)
-#endif
-
 #ifdef CONFIG_MACH_LPC2294
 # ifdef machine_arch_type
 #  undef machine_arch_type
@@ -10369,18 +10630,6 @@ extern unsigned int __machine_arch_type;
 # define machine_is_puppeteer()	(0)
 #endif
 
-#ifdef CONFIG_MACH_MACH_VADATECH
-# ifdef machine_arch_type
-#  undef machine_arch_type
-#  define machine_arch_type	__machine_arch_type
-# else
-#  define machine_arch_type	MACH_TYPE_MACH_VADATECH
-# endif
-# define machine_is_vt001()	(machine_arch_type == MACH_TYPE_MACH_VADATECH)
-#else
-# define machine_is_vt001()	(0)
-#endif
-
 #ifdef CONFIG_MACH_E570
 # ifdef machine_arch_type
 #  undef machine_arch_type
@@ -11461,16 +11710,16 @@ extern unsigned int __machine_arch_type;
 # define machine_is_samoa()	(0)
 #endif
 
-#ifdef CONFIG_MACH_T3XSCALE
+#ifdef CONFIG_MACH_PALMT3
 # ifdef machine_arch_type
 #  undef machine_arch_type
 #  define machine_arch_type	__machine_arch_type
 # else
-#  define machine_arch_type	MACH_TYPE_T3XSCALE
+#  define machine_arch_type	MACH_TYPE_PALMT3
 # endif
-# define machine_is_t3xscale()	(machine_arch_type == MACH_TYPE_T3XSCALE)
+# define machine_is_palmt3()	(machine_arch_type == MACH_TYPE_PALMT3)
 #else
-# define machine_is_t3xscale()	(0)
+# define machine_is_palmt3()	(0)
 #endif
 
 #ifdef CONFIG_MACH_I878
@@ -11533,16 +11782,16 @@ extern unsigned int __machine_arch_type;
 # define machine_is_omap_palmtt2()	(0)
 #endif
 
-#ifdef CONFIG_MACH_XSCALE_PALMLD
+#ifdef CONFIG_MACH_PALMLD
 # ifdef machine_arch_type
 #  undef machine_arch_type
 #  define machine_arch_type	__machine_arch_type
 # else
-#  define machine_arch_type	MACH_TYPE_XSCALE_PALMLD
+#  define machine_arch_type	MACH_TYPE_PALMLD
 # endif
-# define machine_is_xscale_palmld()	(machine_arch_type == MACH_TYPE_XSCALE_PALMLD)
+# define machine_is_palmld()	(machine_arch_type == MACH_TYPE_PALMLD)
 #else
-# define machine_is_xscale_palmld()	(0)
+# define machine_is_palmld()	(0)
 #endif
 
 #ifdef CONFIG_MACH_CC9C
@@ -11641,16 +11890,16 @@ extern unsigned int __machine_arch_type;
 # define machine_is_maestro()	(0)
 #endif
 
-#ifdef CONFIG_MACH_TUNGE2
+#ifdef CONFIG_MACH_PALMTE2
 # ifdef machine_arch_type
 #  undef machine_arch_type
 #  define machine_arch_type	__machine_arch_type
 # else
-#  define machine_arch_type	MACH_TYPE_TUNGE2
+#  define machine_arch_type	MACH_TYPE_PALMTE2
 # endif
-# define machine_is_tunge2()	(machine_arch_type == MACH_TYPE_TUNGE2)
+# define machine_is_palmte2()	(machine_arch_type == MACH_TYPE_PALMTE2)
 #else
-# define machine_is_tunge2()	(0)
+# define machine_is_palmte2()	(0)
 #endif
 
 #ifdef CONFIG_MACH_IXBBM
@@ -12133,16 +12382,16 @@ extern unsigned int __machine_arch_type;
 # define machine_is_mahi_cdac()	(0)
 #endif
 
-#ifdef CONFIG_MACH_XSCALE_PALMTX
+#ifdef CONFIG_MACH_PALMTX
 # ifdef machine_arch_type
 #  undef machine_arch_type
 #  define machine_arch_type	__machine_arch_type
 # else
-#  define machine_arch_type	MACH_TYPE_XSCALE_PALMTX
+#  define machine_arch_type	MACH_TYPE_PALMTX
 # endif
-# define machine_is_xscale_palmtx()	(machine_arch_type == MACH_TYPE_XSCALE_PALMTX)
+# define machine_is_palmtx()	(machine_arch_type == MACH_TYPE_PALMTX)
 #else
-# define machine_is_xscale_palmtx()	(0)
+# define machine_is_palmtx()	(0)
 #endif
 
 #ifdef CONFIG_MACH_S3C2413
@@ -12409,16 +12658,16 @@ extern unsigned int __machine_arch_type;
 # define machine_is_omap_twip()	(0)
 #endif
 
-#ifdef CONFIG_MACH_XSCALE_PALMTREO650
+#ifdef CONFIG_MACH_PALMT650
 # ifdef machine_arch_type
 #  undef machine_arch_type
 #  define machine_arch_type	__machine_arch_type
 # else
-#  define machine_arch_type	MACH_TYPE_XSCALE_PALMTREO650
+#  define machine_arch_type	MACH_TYPE_PALMT650
 # endif
-# define machine_is_xscale_treo650()	(machine_arch_type == MACH_TYPE_XSCALE_PALMTREO650)
+# define machine_is_palmt650()	(machine_arch_type == MACH_TYPE_PALMT650)
 #else
-# define machine_is_xscale_treo650()	(0)
+# define machine_is_palmt650()	(0)
 #endif
 
 #ifdef CONFIG_MACH_ACUMEN
@@ -12505,28 +12754,28 @@ extern unsigned int __machine_arch_type;
 # define machine_is_netclient()	(0)
 #endif
 
-#ifdef CONFIG_MACH_XSCALE_PALMTT5
+#ifdef CONFIG_MACH_PALMT5
 # ifdef machine_arch_type
 #  undef machine_arch_type
 #  define machine_arch_type	__machine_arch_type
 # else
-#  define machine_arch_type	MACH_TYPE_XSCALE_PALMTT5
+#  define machine_arch_type	MACH_TYPE_PALMT5
 # endif
-# define machine_is_xscale_palmtt5()	(machine_arch_type == MACH_TYPE_XSCALE_PALMTT5)
+# define machine_is_palmt5()	(machine_arch_type == MACH_TYPE_PALMT5)
 #else
-# define machine_is_xscale_palmtt5()	(0)
+# define machine_is_palmt5()	(0)
 #endif
 
-#ifdef CONFIG_MACH_OMAP_PALMTC
+#ifdef CONFIG_MACH_PALMTC
 # ifdef machine_arch_type
 #  undef machine_arch_type
 #  define machine_arch_type	__machine_arch_type
 # else
-#  define machine_arch_type	MACH_TYPE_OMAP_PALMTC
+#  define machine_arch_type	MACH_TYPE_PALMTC
 # endif
-# define machine_is_xscale_palmtc()	(machine_arch_type == MACH_TYPE_OMAP_PALMTC)
+# define machine_is_palmtc()	(machine_arch_type == MACH_TYPE_PALMTC)
 #else
-# define machine_is_xscale_palmtc()	(0)
+# define machine_is_palmtc()	(0)
 #endif
 
 #ifdef CONFIG_MACH_OMAP_APOLLON
@@ -14569,16 +14818,16 @@ extern unsigned int __machine_arch_type;
 # define machine_is_ecsd()	(0)
 #endif
 
-#ifdef CONFIG_MACH_ZIRE31
+#ifdef CONFIG_MACH_PALMZ31
 # ifdef machine_arch_type
 #  undef machine_arch_type
 #  define machine_arch_type	__machine_arch_type
 # else
-#  define machine_arch_type	MACH_TYPE_ZIRE31
+#  define machine_arch_type	MACH_TYPE_PALMZ31
 # endif
-# define machine_is_zire31()	(machine_arch_type == MACH_TYPE_ZIRE31)
+# define machine_is_palmz31()	(machine_arch_type == MACH_TYPE_PALMZ31)
 #else
-# define machine_is_zire31()	(0)
+# define machine_is_palmz31()	(0)
 #endif
 
 #ifdef CONFIG_MACH_FSG
@@ -16033,18 +16282,6 @@ extern unsigned int __machine_arch_type;
 # define machine_is_eti_c1()	(0)
 #endif
 
-#ifdef CONFIG_MACH_MACH_DEP2410
-# ifdef machine_arch_type
-#  undef machine_arch_type
-#  define machine_arch_type	__machine_arch_type
-# else
-#  define machine_arch_type	MACH_TYPE_MACH_DEP2410
-# endif
-# define machine_is_mach_dep2410()	(machine_arch_type == MACH_TYPE_MACH_DEP2410)
-#else
-# define machine_is_mach_dep2410()	(0)
-#endif
-
 #ifdef CONFIG_MACH_AC100
 # ifdef machine_arch_type
 #  undef machine_arch_type
@@ -16501,18 +16738,6 @@ extern unsigned int __machine_arch_type;
 # define machine_is_schmoogie()	(0)
 #endif
 
-#ifdef CONFIG_MACH_SFFSDR
-# ifdef machine_arch_type
-#  undef machine_arch_type
-#  define machine_arch_type	__machine_arch_type
-# else
-#  define machine_arch_type	MACH_TYPE_SFFSDR
-# endif
-# define machine_is_sffsdr()	(machine_arch_type == MACH_TYPE_SFFSDR)
-#else
-# define machine_is_sffsdr()	(0)
-#endif
-
 #ifdef CONFIG_MACH_AZTOOL
 # ifdef machine_arch_type
 #  undef machine_arch_type
@@ -18457,52 +18682,52 @@ extern unsigned int __machine_arch_type;
 # define machine_is_sideoatsgrama()	(0)
 #endif
 
-#ifdef CONFIG_MACH_XSCALE_PALMT700P
+#ifdef CONFIG_MACH_PALMTREO700P
 # ifdef machine_arch_type
 #  undef machine_arch_type
 #  define machine_arch_type	__machine_arch_type
 # else
-#  define machine_arch_type	MACH_TYPE_XSCALE_PALMT700P
+#  define machine_arch_type	MACH_TYPE_PALMTREO700P
 # endif
-# define machine_is_xscale_palmt700p()	(machine_arch_type == MACH_TYPE_XSCALE_PALMT700P)
+# define machine_is_palmtreo700p()	(machine_arch_type == MACH_TYPE_PALMTREO700P)
 #else
-# define machine_is_xscale_palmt700p()	(0)
+# define machine_is_palmtreo700p()	(0)
 #endif
 
-#ifdef CONFIG_MACH_XSCALE_PALMT700W
+#ifdef CONFIG_MACH_PALMTREO700W
 # ifdef machine_arch_type
 #  undef machine_arch_type
 #  define machine_arch_type	__machine_arch_type
 # else
-#  define machine_arch_type	MACH_TYPE_XSCALE_PALMT700W
+#  define machine_arch_type	MACH_TYPE_PALMTREO700W
 # endif
-# define machine_is_xscale_palmt700w()	(machine_arch_type == MACH_TYPE_XSCALE_PALMT700W)
+# define machine_is_palmtreo700w()	(machine_arch_type == MACH_TYPE_PALMTREO700W)
 #else
-# define machine_is_xscale_palmt700w()	(0)
+# define machine_is_palmtreo700w()	(0)
 #endif
 
-#ifdef CONFIG_MACH_XSCALE_PALMT750
+#ifdef CONFIG_MACH_PALMTREO750
 # ifdef machine_arch_type
 #  undef machine_arch_type
 #  define machine_arch_type	__machine_arch_type
 # else
-#  define machine_arch_type	MACH_TYPE_XSCALE_PALMT750
+#  define machine_arch_type	MACH_TYPE_PALMTREO750
 # endif
-# define machine_is_xscale_palmt750()	(machine_arch_type == MACH_TYPE_XSCALE_PALMT750)
+# define machine_is_palmtreo750()	(machine_arch_type == MACH_TYPE_PALMTREO750)
 #else
-# define machine_is_xscale_palmt750()	(0)
+# define machine_is_palmtreo750()	(0)
 #endif
 
-#ifdef CONFIG_MACH_XSCALE_PALMT755P
+#ifdef CONFIG_MACH_PALMTREO755P
 # ifdef machine_arch_type
 #  undef machine_arch_type
 #  define machine_arch_type	__machine_arch_type
 # else
-#  define machine_arch_type	MACH_TYPE_XSCALE_PALMT755P
+#  define machine_arch_type	MACH_TYPE_PALMTREO755P
 # endif
-# define machine_is_xscale_palmt755p()	(machine_arch_type == MACH_TYPE_XSCALE_PALMT755P)
+# define machine_is_palmtreo755p()	(machine_arch_type == MACH_TYPE_PALMTREO755P)
 #else
-# define machine_is_xscale_palmt755p()	(0)
+# define machine_is_palmtreo755p()	(0)
 #endif
 
 #ifdef CONFIG_MACH_EZREGANUT9200
@@ -18961,16 +19186,16 @@ extern unsigned int __machine_arch_type;
 # define machine_is_adx_wsc2()	(0)
 #endif
 
-#ifdef CONFIG_MACH_ADX_MEDINET
+#ifdef CONFIG_MACH_ADX_MEDCOM
 # ifdef machine_arch_type
 #  undef machine_arch_type
 #  define machine_arch_type	__machine_arch_type
 # else
-#  define machine_arch_type	MACH_TYPE_ADX_MEDINET
+#  define machine_arch_type	MACH_TYPE_ADX_MEDCOM
 # endif
-# define machine_is_adx_medinet()	(machine_arch_type == MACH_TYPE_ADX_MEDINET)
+# define machine_is_adx_medcom()	(machine_arch_type == MACH_TYPE_ADX_MEDCOM)
 #else
-# define machine_is_adx_medinet()	(0)
+# define machine_is_adx_medcom()	(0)
 #endif
 
 #ifdef CONFIG_MACH_BBOARD
@@ -19633,16 +19858,16 @@ extern unsigned int __machine_arch_type;
 # define machine_is_tll5000()	(0)
 #endif
 
-#ifdef CONFIG_MACH_HNI_X270
+#ifdef CONFIG_MACH_BEBOT
 # ifdef machine_arch_type
 #  undef machine_arch_type
 #  define machine_arch_type	__machine_arch_type
 # else
-#  define machine_arch_type	MACH_TYPE_HNI_X270
+#  define machine_arch_type	MACH_TYPE_BEBOT
 # endif
-# define machine_is_hni270()	(machine_arch_type == MACH_TYPE_HNI_X270)
+# define machine_is_bebot()	(machine_arch_type == MACH_TYPE_BEBOT)
 #else
-# define machine_is_hni270()	(0)
+# define machine_is_bebot()	(0)
 #endif
 
 #ifdef CONFIG_MACH_QONG
@@ -20605,11 +20830,3177 @@ extern unsigned int __machine_arch_type;
 # define machine_is_dexflex2()	(0)
 #endif
 
+#ifdef CONFIG_MACH_OW
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_OW
+# endif
+# define machine_is_ow()	(machine_arch_type == MACH_TYPE_OW)
+#else
+# define machine_is_ow()	(0)
+#endif
+
+#ifdef CONFIG_MACH_ARMEBS3
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_ARMEBS3
+# endif
+# define machine_is_armebs3()	(machine_arch_type == MACH_TYPE_ARMEBS3)
+#else
+# define machine_is_armebs3()	(0)
+#endif
+
+#ifdef CONFIG_MACH_U3
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_U3
+# endif
+# define machine_is_u3()	(machine_arch_type == MACH_TYPE_U3)
+#else
+# define machine_is_u3()	(0)
+#endif
+
+#ifdef CONFIG_MACH_SMDK2450
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_SMDK2450
+# endif
+# define machine_is_smdk2450()	(machine_arch_type == MACH_TYPE_SMDK2450)
+#else
+# define machine_is_smdk2450()	(0)
+#endif
+
+#ifdef CONFIG_MACH_RSI_EWS
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_RSI_EWS
+# endif
+# define machine_is_rsi_ews()	(machine_arch_type == MACH_TYPE_RSI_EWS)
+#else
+# define machine_is_rsi_ews()	(0)
+#endif
+
+#ifdef CONFIG_MACH_TNB
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_TNB
+# endif
+# define machine_is_tnb()	(machine_arch_type == MACH_TYPE_TNB)
+#else
+# define machine_is_tnb()	(0)
+#endif
+
+#ifdef CONFIG_MACH_TOEPATH
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_TOEPATH
+# endif
+# define machine_is_toepath()	(machine_arch_type == MACH_TYPE_TOEPATH)
+#else
+# define machine_is_toepath()	(0)
+#endif
+
+#ifdef CONFIG_MACH_KB9263
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_KB9263
+# endif
+# define machine_is_kb9263()	(machine_arch_type == MACH_TYPE_KB9263)
+#else
+# define machine_is_kb9263()	(0)
+#endif
+
+#ifdef CONFIG_MACH_MT7108
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_MT7108
+# endif
+# define machine_is_mt7108()	(machine_arch_type == MACH_TYPE_MT7108)
+#else
+# define machine_is_mt7108()	(0)
+#endif
+
+#ifdef CONFIG_MACH_SMTR2440
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_SMTR2440
+# endif
+# define machine_is_smtr2440()	(machine_arch_type == MACH_TYPE_SMTR2440)
+#else
+# define machine_is_smtr2440()	(0)
+#endif
+
+#ifdef CONFIG_MACH_MANAO
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_MANAO
+# endif
+# define machine_is_manao()	(machine_arch_type == MACH_TYPE_MANAO)
+#else
+# define machine_is_manao()	(0)
+#endif
+
+#ifdef CONFIG_MACH_CM_X300
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_CM_X300
+# endif
+# define machine_is_cm_x300()	(machine_arch_type == MACH_TYPE_CM_X300)
+#else
+# define machine_is_cm_x300()	(0)
+#endif
+
+#ifdef CONFIG_MACH_GULFSTREAM_KP
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_GULFSTREAM_KP
+# endif
+# define machine_is_gulfstream_kp()	(machine_arch_type == MACH_TYPE_GULFSTREAM_KP)
+#else
+# define machine_is_gulfstream_kp()	(0)
+#endif
+
+#ifdef CONFIG_MACH_LANREADYFN522
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_LANREADYFN522
+# endif
+# define machine_is_lanreadyfn522()	(machine_arch_type == MACH_TYPE_LANREADYFN522)
+#else
+# define machine_is_lanreadyfn522()	(0)
+#endif
+
+#ifdef CONFIG_MACH_ARMA37
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_ARMA37
+# endif
+# define machine_is_arma37()	(machine_arch_type == MACH_TYPE_ARMA37)
+#else
+# define machine_is_arma37()	(0)
+#endif
+
+#ifdef CONFIG_MACH_MENDEL
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_MENDEL
+# endif
+# define machine_is_mendel()	(machine_arch_type == MACH_TYPE_MENDEL)
+#else
+# define machine_is_mendel()	(0)
+#endif
+
+#ifdef CONFIG_MACH_PELCO_ILIAD
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_PELCO_ILIAD
+# endif
+# define machine_is_pelco_iliad()	(machine_arch_type == MACH_TYPE_PELCO_ILIAD)
+#else
+# define machine_is_pelco_iliad()	(0)
+#endif
+
+#ifdef CONFIG_MACH_UNIT2P
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_UNIT2P
+# endif
+# define machine_is_unit2p()	(machine_arch_type == MACH_TYPE_UNIT2P)
+#else
+# define machine_is_unit2p()	(0)
+#endif
+
+#ifdef CONFIG_MACH_INC20OTTER
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_INC20OTTER
+# endif
+# define machine_is_inc20otter()	(machine_arch_type == MACH_TYPE_INC20OTTER)
+#else
+# define machine_is_inc20otter()	(0)
+#endif
+
+#ifdef CONFIG_MACH_AT91SAM9G20EK
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_AT91SAM9G20EK
+# endif
+# define machine_is_at91sam9g20ek()	(machine_arch_type == MACH_TYPE_AT91SAM9G20EK)
+#else
+# define machine_is_at91sam9g20ek()	(0)
+#endif
+
+#ifdef CONFIG_MACH_STORCENTER
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_STORCENTER
+# endif
+# define machine_is_sc_ge2()	(machine_arch_type == MACH_TYPE_STORCENTER)
+#else
+# define machine_is_sc_ge2()	(0)
+#endif
+
+#ifdef CONFIG_MACH_SMDK6410
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_SMDK6410
+# endif
+# define machine_is_smdk6410()	(machine_arch_type == MACH_TYPE_SMDK6410)
+#else
+# define machine_is_smdk6410()	(0)
+#endif
+
+#ifdef CONFIG_MACH_U300
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_U300
+# endif
+# define machine_is_u300()	(machine_arch_type == MACH_TYPE_U300)
+#else
+# define machine_is_u300()	(0)
+#endif
+
+#ifdef CONFIG_MACH_U500
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_U500
+# endif
+# define machine_is_u500()	(machine_arch_type == MACH_TYPE_U500)
+#else
+# define machine_is_u500()	(0)
+#endif
+
+#ifdef CONFIG_MACH_DS9260
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_DS9260
+# endif
+# define machine_is_ds9260()	(machine_arch_type == MACH_TYPE_DS9260)
+#else
+# define machine_is_ds9260()	(0)
+#endif
+
+#ifdef CONFIG_MACH_RIVERROCK
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_RIVERROCK
+# endif
+# define machine_is_riverrock()	(machine_arch_type == MACH_TYPE_RIVERROCK)
+#else
+# define machine_is_riverrock()	(0)
+#endif
+
+#ifdef CONFIG_MACH_SCIBATH
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_SCIBATH
+# endif
+# define machine_is_scibath()	(machine_arch_type == MACH_TYPE_SCIBATH)
+#else
+# define machine_is_scibath()	(0)
+#endif
+
+#ifdef CONFIG_MACH_AT91SAM7SE512EK
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_AT91SAM7SE512EK
+# endif
+# define machine_is_at91sam7se()	(machine_arch_type == MACH_TYPE_AT91SAM7SE512EK)
+#else
+# define machine_is_at91sam7se()	(0)
+#endif
+
+#ifdef CONFIG_MACH_WRT350N_V2
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_WRT350N_V2
+# endif
+# define machine_is_wrt350n_v2()	(machine_arch_type == MACH_TYPE_WRT350N_V2)
+#else
+# define machine_is_wrt350n_v2()	(0)
+#endif
+
+#ifdef CONFIG_MACH_MULTIMEDIA
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_MULTIMEDIA
+# endif
+# define machine_is_multimedia()	(machine_arch_type == MACH_TYPE_MULTIMEDIA)
+#else
+# define machine_is_multimedia()	(0)
+#endif
+
+#ifdef CONFIG_MACH_MARVIN
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_MARVIN
+# endif
+# define machine_is_marvin()	(machine_arch_type == MACH_TYPE_MARVIN)
+#else
+# define machine_is_marvin()	(0)
+#endif
+
+#ifdef CONFIG_MACH_X500
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_X500
+# endif
+# define machine_is_x500()	(machine_arch_type == MACH_TYPE_X500)
+#else
+# define machine_is_x500()	(0)
+#endif
+
+#ifdef CONFIG_MACH_AWLUG4LCU
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_AWLUG4LCU
+# endif
+# define machine_is_awlug4lcu()	(machine_arch_type == MACH_TYPE_AWLUG4LCU)
+#else
+# define machine_is_awlug4lcu()	(0)
+#endif
+
+#ifdef CONFIG_MACH_PALERMOC
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_PALERMOC
+# endif
+# define machine_is_palermoc()	(machine_arch_type == MACH_TYPE_PALERMOC)
+#else
+# define machine_is_palermoc()	(0)
+#endif
+
+#ifdef CONFIG_MACH_OMAP_LDP
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_OMAP_LDP
+# endif
+# define machine_is_omap_ldp()	(machine_arch_type == MACH_TYPE_OMAP_LDP)
+#else
+# define machine_is_omap_ldp()	(0)
+#endif
+
+#ifdef CONFIG_MACH_IP500
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_IP500
+# endif
+# define machine_is_ip500()	(machine_arch_type == MACH_TYPE_IP500)
+#else
+# define machine_is_ip500()	(0)
+#endif
+
+#ifdef CONFIG_MACH_ASE2
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_ASE2
+# endif
+# define machine_is_ase2()	(machine_arch_type == MACH_TYPE_ASE2)
+#else
+# define machine_is_ase2()	(0)
+#endif
+
+#ifdef CONFIG_MACH_MX35EVB
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_MX35EVB
+# endif
+# define machine_is_mx35evb()	(machine_arch_type == MACH_TYPE_MX35EVB)
+#else
+# define machine_is_mx35evb()	(0)
+#endif
+
+#ifdef CONFIG_MACH_AML_M8050
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_AML_M8050
+# endif
+# define machine_is_aml_m8050()	(machine_arch_type == MACH_TYPE_AML_M8050)
+#else
+# define machine_is_aml_m8050()	(0)
+#endif
+
+#ifdef CONFIG_MACH_MX35_3DS
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_MX35_3DS
+# endif
+# define machine_is_mx35_3ds()	(machine_arch_type == MACH_TYPE_MX35_3DS)
+#else
+# define machine_is_mx35_3ds()	(0)
+#endif
+
+#ifdef CONFIG_MACH_MARS
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_MARS
+# endif
+# define machine_is_mars()	(machine_arch_type == MACH_TYPE_MARS)
+#else
+# define machine_is_mars()	(0)
+#endif
+
+#ifdef CONFIG_MACH_NTOSD_644XA
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_NTOSD_644XA
+# endif
+# define machine_is_ntosd_644xa()	(machine_arch_type == MACH_TYPE_NTOSD_644XA)
+#else
+# define machine_is_ntosd_644xa()	(0)
+#endif
+
+#ifdef CONFIG_MACH_BADGER
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_BADGER
+# endif
+# define machine_is_badger()	(machine_arch_type == MACH_TYPE_BADGER)
+#else
+# define machine_is_badger()	(0)
+#endif
+
+#ifdef CONFIG_MACH_TRIZEPS4WL
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_TRIZEPS4WL
+# endif
+# define machine_is_trizeps4wl()	(machine_arch_type == MACH_TYPE_TRIZEPS4WL)
+#else
+# define machine_is_trizeps4wl()	(0)
+#endif
+
+#ifdef CONFIG_MACH_TRIZEPS5
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_TRIZEPS5
+# endif
+# define machine_is_trizeps5()	(machine_arch_type == MACH_TYPE_TRIZEPS5)
+#else
+# define machine_is_trizeps5()	(0)
+#endif
+
+#ifdef CONFIG_MACH_MARLIN
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_MARLIN
+# endif
+# define machine_is_marlin()	(machine_arch_type == MACH_TYPE_MARLIN)
+#else
+# define machine_is_marlin()	(0)
+#endif
+
+#ifdef CONFIG_MACH_TS78XX
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_TS78XX
+# endif
+# define machine_is_ts78xx()	(machine_arch_type == MACH_TYPE_TS78XX)
+#else
+# define machine_is_ts78xx()	(0)
+#endif
+
+#ifdef CONFIG_MACH_HPIPAQ214
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_HPIPAQ214
+# endif
+# define machine_is_hpipaq214()	(machine_arch_type == MACH_TYPE_HPIPAQ214)
+#else
+# define machine_is_hpipaq214()	(0)
+#endif
+
+#ifdef CONFIG_MACH_AT572D940DCM
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_AT572D940DCM
+# endif
+# define machine_is_at572d940dcm()	(machine_arch_type == MACH_TYPE_AT572D940DCM)
+#else
+# define machine_is_at572d940dcm()	(0)
+#endif
+
+#ifdef CONFIG_MACH_NE1BOARD
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_NE1BOARD
+# endif
+# define machine_is_ne1board()	(machine_arch_type == MACH_TYPE_NE1BOARD)
+#else
+# define machine_is_ne1board()	(0)
+#endif
+
+#ifdef CONFIG_MACH_ZANTE
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_ZANTE
+# endif
+# define machine_is_zante()	(machine_arch_type == MACH_TYPE_ZANTE)
+#else
+# define machine_is_zante()	(0)
+#endif
+
+#ifdef CONFIG_MACH_SFFSDR
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_SFFSDR
+# endif
+# define machine_is_sffsdr()	(machine_arch_type == MACH_TYPE_SFFSDR)
+#else
+# define machine_is_sffsdr()	(0)
+#endif
+
+#ifdef CONFIG_MACH_TW2662
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_TW2662
+# endif
+# define machine_is_tw2662()	(machine_arch_type == MACH_TYPE_TW2662)
+#else
+# define machine_is_tw2662()	(0)
+#endif
+
+#ifdef CONFIG_MACH_VF10XX
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_VF10XX
+# endif
+# define machine_is_vf10xx()	(machine_arch_type == MACH_TYPE_VF10XX)
+#else
+# define machine_is_vf10xx()	(0)
+#endif
+
+#ifdef CONFIG_MACH_ZORAN43XX
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_ZORAN43XX
+# endif
+# define machine_is_zoran43xx()	(machine_arch_type == MACH_TYPE_ZORAN43XX)
+#else
+# define machine_is_zoran43xx()	(0)
+#endif
+
+#ifdef CONFIG_MACH_SONIX926
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_SONIX926
+# endif
+# define machine_is_sonix926()	(machine_arch_type == MACH_TYPE_SONIX926)
+#else
+# define machine_is_sonix926()	(0)
+#endif
+
+#ifdef CONFIG_MACH_CELESTIALSEMI
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_CELESTIALSEMI
+# endif
+# define machine_is_celestialsemi()	(machine_arch_type == MACH_TYPE_CELESTIALSEMI)
+#else
+# define machine_is_celestialsemi()	(0)
+#endif
+
+#ifdef CONFIG_MACH_CC9M2443
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_CC9M2443
+# endif
+# define machine_is_cc9m2443()	(machine_arch_type == MACH_TYPE_CC9M2443)
+#else
+# define machine_is_cc9m2443()	(0)
+#endif
+
+#ifdef CONFIG_MACH_TW5334
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_TW5334
+# endif
+# define machine_is_tw5334()	(machine_arch_type == MACH_TYPE_TW5334)
+#else
+# define machine_is_tw5334()	(0)
+#endif
+
+#ifdef CONFIG_MACH_HTCARTEMIS
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_HTCARTEMIS
+# endif
+# define machine_is_omap_htcartemis()	(machine_arch_type == MACH_TYPE_HTCARTEMIS)
+#else
+# define machine_is_omap_htcartemis()	(0)
+#endif
+
+#ifdef CONFIG_MACH_NAL_HLITE
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_NAL_HLITE
+# endif
+# define machine_is_nal_hlite()	(machine_arch_type == MACH_TYPE_NAL_HLITE)
+#else
+# define machine_is_nal_hlite()	(0)
+#endif
+
+#ifdef CONFIG_MACH_HTCVOGUE
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_HTCVOGUE
+# endif
+# define machine_is_htcvogue()	(machine_arch_type == MACH_TYPE_HTCVOGUE)
+#else
+# define machine_is_htcvogue()	(0)
+#endif
+
+#ifdef CONFIG_MACH_SMARTWEB
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_SMARTWEB
+# endif
+# define machine_is_smartweb()	(machine_arch_type == MACH_TYPE_SMARTWEB)
+#else
+# define machine_is_smartweb()	(0)
+#endif
+
+#ifdef CONFIG_MACH_MV86XX
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_MV86XX
+# endif
+# define machine_is_mv86xx()	(machine_arch_type == MACH_TYPE_MV86XX)
+#else
+# define machine_is_mv86xx()	(0)
+#endif
+
+#ifdef CONFIG_MACH_MV87XX
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_MV87XX
+# endif
+# define machine_is_mv87xx()	(machine_arch_type == MACH_TYPE_MV87XX)
+#else
+# define machine_is_mv87xx()	(0)
+#endif
+
+#ifdef CONFIG_MACH_SONGYOUNGHO
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_SONGYOUNGHO
+# endif
+# define machine_is_songyoungho()	(machine_arch_type == MACH_TYPE_SONGYOUNGHO)
+#else
+# define machine_is_songyoungho()	(0)
+#endif
+
+#ifdef CONFIG_MACH_YOUNGHOTEMA
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_YOUNGHOTEMA
+# endif
+# define machine_is_younghotema()	(machine_arch_type == MACH_TYPE_YOUNGHOTEMA)
+#else
+# define machine_is_younghotema()	(0)
+#endif
+
+#ifdef CONFIG_MACH_PCM037
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_PCM037
+# endif
+# define machine_is_pcm037()	(machine_arch_type == MACH_TYPE_PCM037)
+#else
+# define machine_is_pcm037()	(0)
+#endif
+
+#ifdef CONFIG_MACH_MMVP
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_MMVP
+# endif
+# define machine_is_mmvp()	(machine_arch_type == MACH_TYPE_MMVP)
+#else
+# define machine_is_mmvp()	(0)
+#endif
+
+#ifdef CONFIG_MACH_MMAP
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_MMAP
+# endif
+# define machine_is_mmap()	(machine_arch_type == MACH_TYPE_MMAP)
+#else
+# define machine_is_mmap()	(0)
+#endif
+
+#ifdef CONFIG_MACH_PTID2410
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_PTID2410
+# endif
+# define machine_is_ptid2410()	(machine_arch_type == MACH_TYPE_PTID2410)
+#else
+# define machine_is_ptid2410()	(0)
+#endif
+
+#ifdef CONFIG_MACH_JAMES_926
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_JAMES_926
+# endif
+# define machine_is_james_926()	(machine_arch_type == MACH_TYPE_JAMES_926)
+#else
+# define machine_is_james_926()	(0)
+#endif
+
+#ifdef CONFIG_MACH_FM6000
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_FM6000
+# endif
+# define machine_is_fm6000()	(machine_arch_type == MACH_TYPE_FM6000)
+#else
+# define machine_is_fm6000()	(0)
+#endif
+
+#ifdef CONFIG_MACH_DB88F6281_BP
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_DB88F6281_BP
+# endif
+# define machine_is_db88f6281_bp()	(machine_arch_type == MACH_TYPE_DB88F6281_BP)
+#else
+# define machine_is_db88f6281_bp()	(0)
+#endif
+
+#ifdef CONFIG_MACH_RD88F6192_NAS
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_RD88F6192_NAS
+# endif
+# define machine_is_rd88f6192_nas()	(machine_arch_type == MACH_TYPE_RD88F6192_NAS)
+#else
+# define machine_is_rd88f6192_nas()	(0)
+#endif
+
+#ifdef CONFIG_MACH_RD88F6281
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_RD88F6281
+# endif
+# define machine_is_rd88f6281()	(machine_arch_type == MACH_TYPE_RD88F6281)
+#else
+# define machine_is_rd88f6281()	(0)
+#endif
+
+#ifdef CONFIG_MACH_DB78X00_BP
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_DB78X00_BP
+# endif
+# define machine_is_db78x00_bp()	(machine_arch_type == MACH_TYPE_DB78X00_BP)
+#else
+# define machine_is_db78x00_bp()	(0)
+#endif
+
+#ifdef CONFIG_MACH_SMDK2416
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_SMDK2416
+# endif
+# define machine_is_smdk2416()	(machine_arch_type == MACH_TYPE_SMDK2416)
+#else
+# define machine_is_smdk2416()	(0)
+#endif
+
+#ifdef CONFIG_MACH_OCE_SPIDER_SI
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_OCE_SPIDER_SI
+# endif
+# define machine_is_oce_spider_si()	(machine_arch_type == MACH_TYPE_OCE_SPIDER_SI)
+#else
+# define machine_is_oce_spider_si()	(0)
+#endif
+
+#ifdef CONFIG_MACH_OCE_SPIDER_SK
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_OCE_SPIDER_SK
+# endif
+# define machine_is_oce_spider_sk()	(machine_arch_type == MACH_TYPE_OCE_SPIDER_SK)
+#else
+# define machine_is_oce_spider_sk()	(0)
+#endif
+
+#ifdef CONFIG_MACH_ROVERN6
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_ROVERN6
+# endif
+# define machine_is_rovern6()	(machine_arch_type == MACH_TYPE_ROVERN6)
+#else
+# define machine_is_rovern6()	(0)
+#endif
+
+#ifdef CONFIG_MACH_PELCO_EVOLUTION
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_PELCO_EVOLUTION
+# endif
+# define machine_is_pelco_evolution()	(machine_arch_type == MACH_TYPE_PELCO_EVOLUTION)
+#else
+# define machine_is_pelco_evolution()	(0)
+#endif
+
+#ifdef CONFIG_MACH_WBD111
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_WBD111
+# endif
+# define machine_is_wbd111()	(machine_arch_type == MACH_TYPE_WBD111)
+#else
+# define machine_is_wbd111()	(0)
+#endif
+
+#ifdef CONFIG_MACH_ELARACPE
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_ELARACPE
+# endif
+# define machine_is_elaracpe()	(machine_arch_type == MACH_TYPE_ELARACPE)
+#else
+# define machine_is_elaracpe()	(0)
+#endif
+
+#ifdef CONFIG_MACH_MABV3
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_MABV3
+# endif
+# define machine_is_mabv3()	(machine_arch_type == MACH_TYPE_MABV3)
+#else
+# define machine_is_mabv3()	(0)
+#endif
+
+#ifdef CONFIG_MACH_MV2120
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_MV2120
+# endif
+# define machine_is_mv2120()	(machine_arch_type == MACH_TYPE_MV2120)
+#else
+# define machine_is_mv2120()	(0)
+#endif
+
+#ifdef CONFIG_MACH_CSB737
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_CSB737
+# endif
+# define machine_is_csb737()	(machine_arch_type == MACH_TYPE_CSB737)
+#else
+# define machine_is_csb737()	(0)
+#endif
+
+#ifdef CONFIG_MACH_MX51_3DS
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_MX51_3DS
+# endif
+# define machine_is_mx51_3ds()	(machine_arch_type == MACH_TYPE_MX51_3DS)
+#else
+# define machine_is_mx51_3ds()	(0)
+#endif
+
+#ifdef CONFIG_MACH_G900
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_G900
+# endif
+# define machine_is_g900()	(machine_arch_type == MACH_TYPE_G900)
+#else
+# define machine_is_g900()	(0)
+#endif
+
+#ifdef CONFIG_MACH_APF27
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_APF27
+# endif
+# define machine_is_apf27()	(machine_arch_type == MACH_TYPE_APF27)
+#else
+# define machine_is_apf27()	(0)
+#endif
+
+#ifdef CONFIG_MACH_GGUS2000
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_GGUS2000
+# endif
+# define machine_is_ggus2000()	(machine_arch_type == MACH_TYPE_GGUS2000)
+#else
+# define machine_is_ggus2000()	(0)
+#endif
+
+#ifdef CONFIG_MACH_OMAP_2430_MIMIC
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_OMAP_2430_MIMIC
+# endif
+# define machine_is_omap_2430_mimic()	(machine_arch_type == MACH_TYPE_OMAP_2430_MIMIC)
+#else
+# define machine_is_omap_2430_mimic()	(0)
+#endif
+
+#ifdef CONFIG_MACH_IMX27LITE
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_IMX27LITE
+# endif
+# define machine_is_imx27lite()	(machine_arch_type == MACH_TYPE_IMX27LITE)
+#else
+# define machine_is_imx27lite()	(0)
+#endif
+
+#ifdef CONFIG_MACH_ALMEX
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_ALMEX
+# endif
+# define machine_is_almex()	(machine_arch_type == MACH_TYPE_ALMEX)
+#else
+# define machine_is_almex()	(0)
+#endif
+
+#ifdef CONFIG_MACH_CONTROL
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_CONTROL
+# endif
+# define machine_is_control()	(machine_arch_type == MACH_TYPE_CONTROL)
+#else
+# define machine_is_control()	(0)
+#endif
+
+#ifdef CONFIG_MACH_MBA2410
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_MBA2410
+# endif
+# define machine_is_mba2410()	(machine_arch_type == MACH_TYPE_MBA2410)
+#else
+# define machine_is_mba2410()	(0)
+#endif
+
+#ifdef CONFIG_MACH_VOLCANO
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_VOLCANO
+# endif
+# define machine_is_volcano()	(machine_arch_type == MACH_TYPE_VOLCANO)
+#else
+# define machine_is_volcano()	(0)
+#endif
+
+#ifdef CONFIG_MACH_ZENITH
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_ZENITH
+# endif
+# define machine_is_zenith()	(machine_arch_type == MACH_TYPE_ZENITH)
+#else
+# define machine_is_zenith()	(0)
+#endif
+
+#ifdef CONFIG_MACH_MUCHIP
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_MUCHIP
+# endif
+# define machine_is_muchip()	(machine_arch_type == MACH_TYPE_MUCHIP)
+#else
+# define machine_is_muchip()	(0)
+#endif
+
+#ifdef CONFIG_MACH_MAGELLAN
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_MAGELLAN
+# endif
+# define machine_is_magellan()	(machine_arch_type == MACH_TYPE_MAGELLAN)
+#else
+# define machine_is_magellan()	(0)
+#endif
+
+#ifdef CONFIG_MACH_USB_A9260
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_USB_A9260
+# endif
+# define machine_is_usb_a9260()	(machine_arch_type == MACH_TYPE_USB_A9260)
+#else
+# define machine_is_usb_a9260()	(0)
+#endif
+
+#ifdef CONFIG_MACH_USB_A9263
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_USB_A9263
+# endif
+# define machine_is_usb_a9263()	(machine_arch_type == MACH_TYPE_USB_A9263)
+#else
+# define machine_is_usb_a9263()	(0)
+#endif
+
+#ifdef CONFIG_MACH_QIL_A9260
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_QIL_A9260
+# endif
+# define machine_is_qil_a9260()	(machine_arch_type == MACH_TYPE_QIL_A9260)
+#else
+# define machine_is_qil_a9260()	(0)
+#endif
+
+#ifdef CONFIG_MACH_CME9210
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_CME9210
+# endif
+# define machine_is_cme9210()	(machine_arch_type == MACH_TYPE_CME9210)
+#else
+# define machine_is_cme9210()	(0)
+#endif
+
+#ifdef CONFIG_MACH_HCZH4
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_HCZH4
+# endif
+# define machine_is_hczh4()	(machine_arch_type == MACH_TYPE_HCZH4)
+#else
+# define machine_is_hczh4()	(0)
+#endif
+
+#ifdef CONFIG_MACH_SPEARBASIC
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_SPEARBASIC
+# endif
+# define machine_is_spearbasic()	(machine_arch_type == MACH_TYPE_SPEARBASIC)
+#else
+# define machine_is_spearbasic()	(0)
+#endif
+
+#ifdef CONFIG_MACH_DEP2440
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_DEP2440
+# endif
+# define machine_is_dep2440()	(machine_arch_type == MACH_TYPE_DEP2440)
+#else
+# define machine_is_dep2440()	(0)
+#endif
+
+#ifdef CONFIG_MACH_HDL_GXR
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_HDL_GXR
+# endif
+# define machine_is_hdl_gxr()	(machine_arch_type == MACH_TYPE_HDL_GXR)
+#else
+# define machine_is_hdl_gxr()	(0)
+#endif
+
+#ifdef CONFIG_MACH_HDL_GT
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_HDL_GT
+# endif
+# define machine_is_hdl_gt()	(machine_arch_type == MACH_TYPE_HDL_GT)
+#else
+# define machine_is_hdl_gt()	(0)
+#endif
+
+#ifdef CONFIG_MACH_HDL_4G
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_HDL_4G
+# endif
+# define machine_is_hdl_4g()	(machine_arch_type == MACH_TYPE_HDL_4G)
+#else
+# define machine_is_hdl_4g()	(0)
+#endif
+
+#ifdef CONFIG_MACH_S3C6000
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_S3C6000
+# endif
+# define machine_is_s3c6000()	(machine_arch_type == MACH_TYPE_S3C6000)
+#else
+# define machine_is_s3c6000()	(0)
+#endif
+
+#ifdef CONFIG_MACH_MMSP2_MDK
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_MMSP2_MDK
+# endif
+# define machine_is_mmsp2_mdk()	(machine_arch_type == MACH_TYPE_MMSP2_MDK)
+#else
+# define machine_is_mmsp2_mdk()	(0)
+#endif
+
+#ifdef CONFIG_MACH_MPX220
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_MPX220
+# endif
+# define machine_is_mpx220()	(machine_arch_type == MACH_TYPE_MPX220)
+#else
+# define machine_is_mpx220()	(0)
+#endif
+
+#ifdef CONFIG_MACH_KZM_ARM11_01
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_KZM_ARM11_01
+# endif
+# define machine_is_kzm_arm11_01()	(machine_arch_type == MACH_TYPE_KZM_ARM11_01)
+#else
+# define machine_is_kzm_arm11_01()	(0)
+#endif
+
+#ifdef CONFIG_MACH_HTC_POLARIS
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_HTC_POLARIS
+# endif
+# define machine_is_htc_polaris()	(machine_arch_type == MACH_TYPE_HTC_POLARIS)
+#else
+# define machine_is_htc_polaris()	(0)
+#endif
+
+#ifdef CONFIG_MACH_HTC_KAISER
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_HTC_KAISER
+# endif
+# define machine_is_htc_kaiser()	(machine_arch_type == MACH_TYPE_HTC_KAISER)
+#else
+# define machine_is_htc_kaiser()	(0)
+#endif
+
+#ifdef CONFIG_MACH_LG_KS20
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_LG_KS20
+# endif
+# define machine_is_lg_ks20()	(machine_arch_type == MACH_TYPE_LG_KS20)
+#else
+# define machine_is_lg_ks20()	(0)
+#endif
+
+#ifdef CONFIG_MACH_HHGPS
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_HHGPS
+# endif
+# define machine_is_hhgps()	(machine_arch_type == MACH_TYPE_HHGPS)
+#else
+# define machine_is_hhgps()	(0)
+#endif
+
+#ifdef CONFIG_MACH_NOKIA_N810_WIMAX
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_NOKIA_N810_WIMAX
+# endif
+# define machine_is_nokia_n810_wimax()	(machine_arch_type == MACH_TYPE_NOKIA_N810_WIMAX)
+#else
+# define machine_is_nokia_n810_wimax()	(0)
+#endif
+
+#ifdef CONFIG_MACH_INSIGHT
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_INSIGHT
+# endif
+# define machine_is_insight()	(machine_arch_type == MACH_TYPE_INSIGHT)
+#else
+# define machine_is_insight()	(0)
+#endif
+
+#ifdef CONFIG_MACH_SAPPHIRE
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_SAPPHIRE
+# endif
+# define machine_is_sapphire()	(machine_arch_type == MACH_TYPE_SAPPHIRE)
+#else
+# define machine_is_sapphire()	(0)
+#endif
+
+#ifdef CONFIG_MACH_CSB637XO
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_CSB637XO
+# endif
+# define machine_is_csb637xo()	(machine_arch_type == MACH_TYPE_CSB637XO)
+#else
+# define machine_is_csb637xo()	(0)
+#endif
+
+#ifdef CONFIG_MACH_EVISIONG
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_EVISIONG
+# endif
+# define machine_is_evisiong()	(machine_arch_type == MACH_TYPE_EVISIONG)
+#else
+# define machine_is_evisiong()	(0)
+#endif
+
+#ifdef CONFIG_MACH_STMP37XX
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_STMP37XX
+# endif
+# define machine_is_stmp37xx()	(machine_arch_type == MACH_TYPE_STMP37XX)
+#else
+# define machine_is_stmp37xx()	(0)
+#endif
+
+#ifdef CONFIG_MACH_STMP38XX
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_STMP38XX
+# endif
+# define machine_is_stmp378x()	(machine_arch_type == MACH_TYPE_STMP38XX)
+#else
+# define machine_is_stmp378x()	(0)
+#endif
+
+#ifdef CONFIG_MACH_TNT
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_TNT
+# endif
+# define machine_is_tnt()	(machine_arch_type == MACH_TYPE_TNT)
+#else
+# define machine_is_tnt()	(0)
+#endif
+
+#ifdef CONFIG_MACH_TBXT
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_TBXT
+# endif
+# define machine_is_tbxt()	(machine_arch_type == MACH_TYPE_TBXT)
+#else
+# define machine_is_tbxt()	(0)
+#endif
+
+#ifdef CONFIG_MACH_PLAYMATE
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_PLAYMATE
+# endif
+# define machine_is_playmate()	(machine_arch_type == MACH_TYPE_PLAYMATE)
+#else
+# define machine_is_playmate()	(0)
+#endif
+
+#ifdef CONFIG_MACH_PNS10
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_PNS10
+# endif
+# define machine_is_pns10()	(machine_arch_type == MACH_TYPE_PNS10)
+#else
+# define machine_is_pns10()	(0)
+#endif
+
+#ifdef CONFIG_MACH_EZNAVI
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_EZNAVI
+# endif
+# define machine_is_eznavi()	(machine_arch_type == MACH_TYPE_EZNAVI)
+#else
+# define machine_is_eznavi()	(0)
+#endif
+
+#ifdef CONFIG_MACH_PS4000
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_PS4000
+# endif
+# define machine_is_ps4000()	(machine_arch_type == MACH_TYPE_PS4000)
+#else
+# define machine_is_ps4000()	(0)
+#endif
+
+#ifdef CONFIG_MACH_EZX_A780
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_EZX_A780
+# endif
+# define machine_is_ezx_a780()	(machine_arch_type == MACH_TYPE_EZX_A780)
+#else
+# define machine_is_ezx_a780()	(0)
+#endif
+
+#ifdef CONFIG_MACH_EZX_E680
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_EZX_E680
+# endif
+# define machine_is_ezx_e680()	(machine_arch_type == MACH_TYPE_EZX_E680)
+#else
+# define machine_is_ezx_e680()	(0)
+#endif
+
+#ifdef CONFIG_MACH_EZX_A1200
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_EZX_A1200
+# endif
+# define machine_is_ezx_a1200()	(machine_arch_type == MACH_TYPE_EZX_A1200)
+#else
+# define machine_is_ezx_a1200()	(0)
+#endif
+
+#ifdef CONFIG_MACH_EZX_E6
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_EZX_E6
+# endif
+# define machine_is_ezx_e6()	(machine_arch_type == MACH_TYPE_EZX_E6)
+#else
+# define machine_is_ezx_e6()	(0)
+#endif
+
+#ifdef CONFIG_MACH_EZX_E2
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_EZX_E2
+# endif
+# define machine_is_ezx_e2()	(machine_arch_type == MACH_TYPE_EZX_E2)
+#else
+# define machine_is_ezx_e2()	(0)
+#endif
+
+#ifdef CONFIG_MACH_EZX_A910
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_EZX_A910
+# endif
+# define machine_is_ezx_a910()	(machine_arch_type == MACH_TYPE_EZX_A910)
+#else
+# define machine_is_ezx_a910()	(0)
+#endif
+
+#ifdef CONFIG_MACH_CWMX31
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_CWMX31
+# endif
+# define machine_is_cwmx31()	(machine_arch_type == MACH_TYPE_CWMX31)
+#else
+# define machine_is_cwmx31()	(0)
+#endif
+
+#ifdef CONFIG_MACH_SL2312
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_SL2312
+# endif
+# define machine_is_sl2312()	(machine_arch_type == MACH_TYPE_SL2312)
+#else
+# define machine_is_sl2312()	(0)
+#endif
+
+#ifdef CONFIG_MACH_BLENNY
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_BLENNY
+# endif
+# define machine_is_blenny()	(machine_arch_type == MACH_TYPE_BLENNY)
+#else
+# define machine_is_blenny()	(0)
+#endif
+
+#ifdef CONFIG_MACH_DS107
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_DS107
+# endif
+# define machine_is_ds107()	(machine_arch_type == MACH_TYPE_DS107)
+#else
+# define machine_is_ds107()	(0)
+#endif
+
+#ifdef CONFIG_MACH_DSX07
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_DSX07
+# endif
+# define machine_is_dsx07()	(machine_arch_type == MACH_TYPE_DSX07)
+#else
+# define machine_is_dsx07()	(0)
+#endif
+
+#ifdef CONFIG_MACH_PICOCOM1
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_PICOCOM1
+# endif
+# define machine_is_picocom1()	(machine_arch_type == MACH_TYPE_PICOCOM1)
+#else
+# define machine_is_picocom1()	(0)
+#endif
+
+#ifdef CONFIG_MACH_LYNX_WOLVERINE
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_LYNX_WOLVERINE
+# endif
+# define machine_is_lynx_wolverine()	(machine_arch_type == MACH_TYPE_LYNX_WOLVERINE)
+#else
+# define machine_is_lynx_wolverine()	(0)
+#endif
+
+#ifdef CONFIG_MACH_UBISYS_P9_SC19
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_UBISYS_P9_SC19
+# endif
+# define machine_is_ubisys_p9_sc19()	(machine_arch_type == MACH_TYPE_UBISYS_P9_SC19)
+#else
+# define machine_is_ubisys_p9_sc19()	(0)
+#endif
+
+#ifdef CONFIG_MACH_KRATOS_LOW
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_KRATOS_LOW
+# endif
+# define machine_is_kratos_low()	(machine_arch_type == MACH_TYPE_KRATOS_LOW)
+#else
+# define machine_is_kratos_low()	(0)
+#endif
+
+#ifdef CONFIG_MACH_M700
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_M700
+# endif
+# define machine_is_m700()	(machine_arch_type == MACH_TYPE_M700)
+#else
+# define machine_is_m700()	(0)
+#endif
+
+#ifdef CONFIG_MACH_EDMINI_V2
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_EDMINI_V2
+# endif
+# define machine_is_edmini_v2()	(machine_arch_type == MACH_TYPE_EDMINI_V2)
+#else
+# define machine_is_edmini_v2()	(0)
+#endif
+
+#ifdef CONFIG_MACH_ZIPIT2
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_ZIPIT2
+# endif
+# define machine_is_zipit2()	(machine_arch_type == MACH_TYPE_ZIPIT2)
+#else
+# define machine_is_zipit2()	(0)
+#endif
+
+#ifdef CONFIG_MACH_HSLFEMTOCELL
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_HSLFEMTOCELL
+# endif
+# define machine_is_hslfemtocell()	(machine_arch_type == MACH_TYPE_HSLFEMTOCELL)
+#else
+# define machine_is_hslfemtocell()	(0)
+#endif
+
+#ifdef CONFIG_MACH_DAINTREE_AT91
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_DAINTREE_AT91
+# endif
+# define machine_is_daintree_at91()	(machine_arch_type == MACH_TYPE_DAINTREE_AT91)
+#else
+# define machine_is_daintree_at91()	(0)
+#endif
+
+#ifdef CONFIG_MACH_SG560USB
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_SG560USB
+# endif
+# define machine_is_sg560usb()	(machine_arch_type == MACH_TYPE_SG560USB)
+#else
+# define machine_is_sg560usb()	(0)
+#endif
+
+#ifdef CONFIG_MACH_OMAP3_PANDORA
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_OMAP3_PANDORA
+# endif
+# define machine_is_omap3_pandora()	(machine_arch_type == MACH_TYPE_OMAP3_PANDORA)
+#else
+# define machine_is_omap3_pandora()	(0)
+#endif
+
+#ifdef CONFIG_MACH_USR8200
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_USR8200
+# endif
+# define machine_is_usr8200()	(machine_arch_type == MACH_TYPE_USR8200)
+#else
+# define machine_is_usr8200()	(0)
+#endif
+
+#ifdef CONFIG_MACH_S1S65K
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_S1S65K
+# endif
+# define machine_is_s1s65k()	(machine_arch_type == MACH_TYPE_S1S65K)
+#else
+# define machine_is_s1s65k()	(0)
+#endif
+
+#ifdef CONFIG_MACH_S2S65A
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_S2S65A
+# endif
+# define machine_is_s2s65a()	(machine_arch_type == MACH_TYPE_S2S65A)
+#else
+# define machine_is_s2s65a()	(0)
+#endif
+
+#ifdef CONFIG_MACH_ICORE
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_ICORE
+# endif
+# define machine_is_icore()	(machine_arch_type == MACH_TYPE_ICORE)
+#else
+# define machine_is_icore()	(0)
+#endif
+
+#ifdef CONFIG_MACH_MSS2
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_MSS2
+# endif
+# define machine_is_mss2()	(machine_arch_type == MACH_TYPE_MSS2)
+#else
+# define machine_is_mss2()	(0)
+#endif
+
+#ifdef CONFIG_MACH_BELMONT
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_BELMONT
+# endif
+# define machine_is_belmont()	(machine_arch_type == MACH_TYPE_BELMONT)
+#else
+# define machine_is_belmont()	(0)
+#endif
+
+#ifdef CONFIG_MACH_ASUSP525
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_ASUSP525
+# endif
+# define machine_is_asusp525()	(machine_arch_type == MACH_TYPE_ASUSP525)
+#else
+# define machine_is_asusp525()	(0)
+#endif
+
+#ifdef CONFIG_MACH_LB88RC8480
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_LB88RC8480
+# endif
+# define machine_is_lb88rc8480()	(machine_arch_type == MACH_TYPE_LB88RC8480)
+#else
+# define machine_is_lb88rc8480()	(0)
+#endif
+
+#ifdef CONFIG_MACH_HIPXA
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_HIPXA
+# endif
+# define machine_is_hipxa()	(machine_arch_type == MACH_TYPE_HIPXA)
+#else
+# define machine_is_hipxa()	(0)
+#endif
+
+#ifdef CONFIG_MACH_MX25_3DS
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_MX25_3DS
+# endif
+# define machine_is_mx25_3ds()	(machine_arch_type == MACH_TYPE_MX25_3DS)
+#else
+# define machine_is_mx25_3ds()	(0)
+#endif
+
+#ifdef CONFIG_MACH_M800
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_M800
+# endif
+# define machine_is_m800()	(machine_arch_type == MACH_TYPE_M800)
+#else
+# define machine_is_m800()	(0)
+#endif
+
+#ifdef CONFIG_MACH_OMAP3530_LV_SOM
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_OMAP3530_LV_SOM
+# endif
+# define machine_is_omap3530_lv_som()	(machine_arch_type == MACH_TYPE_OMAP3530_LV_SOM)
+#else
+# define machine_is_omap3530_lv_som()	(0)
+#endif
+
+#ifdef CONFIG_MACH_PRIMA_EVB
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_PRIMA_EVB
+# endif
+# define machine_is_prima_evb()	(machine_arch_type == MACH_TYPE_PRIMA_EVB)
+#else
+# define machine_is_prima_evb()	(0)
+#endif
+
+#ifdef CONFIG_MACH_MX31BT1
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_MX31BT1
+# endif
+# define machine_is_mx31bt1()	(machine_arch_type == MACH_TYPE_MX31BT1)
+#else
+# define machine_is_mx31bt1()	(0)
+#endif
+
+#ifdef CONFIG_MACH_ATLAS4_EVB
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_ATLAS4_EVB
+# endif
+# define machine_is_atlas4_evb()	(machine_arch_type == MACH_TYPE_ATLAS4_EVB)
+#else
+# define machine_is_atlas4_evb()	(0)
+#endif
+
+#ifdef CONFIG_MACH_MX31CICADA
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_MX31CICADA
+# endif
+# define machine_is_mx31cicada()	(machine_arch_type == MACH_TYPE_MX31CICADA)
+#else
+# define machine_is_mx31cicada()	(0)
+#endif
+
+#ifdef CONFIG_MACH_MI424WR
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_MI424WR
+# endif
+# define machine_is_mi424wr()	(machine_arch_type == MACH_TYPE_MI424WR)
+#else
+# define machine_is_mi424wr()	(0)
+#endif
+
+#ifdef CONFIG_MACH_AXS_ULTRAX
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_AXS_ULTRAX
+# endif
+# define machine_is_axs_ultrax()	(machine_arch_type == MACH_TYPE_AXS_ULTRAX)
+#else
+# define machine_is_axs_ultrax()	(0)
+#endif
+
+#ifdef CONFIG_MACH_AT572D940DEB
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_AT572D940DEB
+# endif
+# define machine_is_at572d940deb()	(machine_arch_type == MACH_TYPE_AT572D940DEB)
+#else
+# define machine_is_at572d940deb()	(0)
+#endif
+
+#ifdef CONFIG_MACH_DAVINCI_DA8XX_EVM
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_DAVINCI_DA8XX_EVM
+# endif
+# define machine_is_davinci_da8xx_evm()	(machine_arch_type == MACH_TYPE_DAVINCI_DA8XX_EVM)
+#else
+# define machine_is_davinci_da8xx_evm()	(0)
+#endif
+
+#ifdef CONFIG_MACH_EP9302
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_EP9302
+# endif
+# define machine_is_ep9302()	(machine_arch_type == MACH_TYPE_EP9302)
+#else
+# define machine_is_ep9302()	(0)
+#endif
+
+#ifdef CONFIG_MACH_AT572D940HFEB
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_AT572D940HFEB
+# endif
+# define machine_is_at572d940hfeb()	(machine_arch_type == MACH_TYPE_AT572D940HFEB)
+#else
+# define machine_is_at572d940hfeb()	(0)
+#endif
+
+#ifdef CONFIG_MACH_CYBOOK3
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_CYBOOK3
+# endif
+# define machine_is_cybook3()	(machine_arch_type == MACH_TYPE_CYBOOK3)
+#else
+# define machine_is_cybook3()	(0)
+#endif
+
+#ifdef CONFIG_MACH_WDG002
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_WDG002
+# endif
+# define machine_is_wdg002()	(machine_arch_type == MACH_TYPE_WDG002)
+#else
+# define machine_is_wdg002()	(0)
+#endif
+
+#ifdef CONFIG_MACH_SG560ADSL
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_SG560ADSL
+# endif
+# define machine_is_sg560adsl()	(machine_arch_type == MACH_TYPE_SG560ADSL)
+#else
+# define machine_is_sg560adsl()	(0)
+#endif
+
+#ifdef CONFIG_MACH_NEXTIO_N2800_ICA
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_NEXTIO_N2800_ICA
+# endif
+# define machine_is_nextio_n2800_ica()	(machine_arch_type == MACH_TYPE_NEXTIO_N2800_ICA)
+#else
+# define machine_is_nextio_n2800_ica()	(0)
+#endif
+
+#ifdef CONFIG_MACH_MARVELL_NEWDB
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_MARVELL_NEWDB
+# endif
+# define machine_is_marvell_newdb()	(machine_arch_type == MACH_TYPE_MARVELL_NEWDB)
+#else
+# define machine_is_marvell_newdb()	(0)
+#endif
+
+#ifdef CONFIG_MACH_VANDIHUD
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_VANDIHUD
+# endif
+# define machine_is_vandihud()	(machine_arch_type == MACH_TYPE_VANDIHUD)
+#else
+# define machine_is_vandihud()	(0)
+#endif
+
+#ifdef CONFIG_MACH_MAGX_E8
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_MAGX_E8
+# endif
+# define machine_is_magx_e8()	(machine_arch_type == MACH_TYPE_MAGX_E8)
+#else
+# define machine_is_magx_e8()	(0)
+#endif
+
+#ifdef CONFIG_MACH_MAGX_Z6
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_MAGX_Z6
+# endif
+# define machine_is_magx_z6()	(machine_arch_type == MACH_TYPE_MAGX_Z6)
+#else
+# define machine_is_magx_z6()	(0)
+#endif
+
+#ifdef CONFIG_MACH_MAGX_V8
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_MAGX_V8
+# endif
+# define machine_is_magx_v8()	(machine_arch_type == MACH_TYPE_MAGX_V8)
+#else
+# define machine_is_magx_v8()	(0)
+#endif
+
+#ifdef CONFIG_MACH_MAGX_U9
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_MAGX_U9
+# endif
+# define machine_is_magx_u9()	(machine_arch_type == MACH_TYPE_MAGX_U9)
+#else
+# define machine_is_magx_u9()	(0)
+#endif
+
+#ifdef CONFIG_MACH_TOUGHCF08
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_TOUGHCF08
+# endif
+# define machine_is_toughcf08()	(machine_arch_type == MACH_TYPE_TOUGHCF08)
+#else
+# define machine_is_toughcf08()	(0)
+#endif
+
+#ifdef CONFIG_MACH_ZW4400
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_ZW4400
+# endif
+# define machine_is_zw4400()	(machine_arch_type == MACH_TYPE_ZW4400)
+#else
+# define machine_is_zw4400()	(0)
+#endif
+
+#ifdef CONFIG_MACH_MARAT91
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_MARAT91
+# endif
+# define machine_is_marat91()	(machine_arch_type == MACH_TYPE_MARAT91)
+#else
+# define machine_is_marat91()	(0)
+#endif
+
+#ifdef CONFIG_MACH_OVERO
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_OVERO
+# endif
+# define machine_is_overo()	(machine_arch_type == MACH_TYPE_OVERO)
+#else
+# define machine_is_overo()	(0)
+#endif
+
+#ifdef CONFIG_MACH_AT2440EVB
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_AT2440EVB
+# endif
+# define machine_is_at2440evb()	(machine_arch_type == MACH_TYPE_AT2440EVB)
+#else
+# define machine_is_at2440evb()	(0)
+#endif
+
+#ifdef CONFIG_MACH_NEOCORE926
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_NEOCORE926
+# endif
+# define machine_is_neocore926()	(machine_arch_type == MACH_TYPE_NEOCORE926)
+#else
+# define machine_is_neocore926()	(0)
+#endif
+
+#ifdef CONFIG_MACH_WNR854T
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_WNR854T
+# endif
+# define machine_is_wnr854t()	(machine_arch_type == MACH_TYPE_WNR854T)
+#else
+# define machine_is_wnr854t()	(0)
+#endif
+
+#ifdef CONFIG_MACH_IMX27
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_IMX27
+# endif
+# define machine_is_imx27()	(machine_arch_type == MACH_TYPE_IMX27)
+#else
+# define machine_is_imx27()	(0)
+#endif
+
+#ifdef CONFIG_MACH_MOOSE_DB
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_MOOSE_DB
+# endif
+# define machine_is_moose_db()	(machine_arch_type == MACH_TYPE_MOOSE_DB)
+#else
+# define machine_is_moose_db()	(0)
+#endif
+
+#ifdef CONFIG_MACH_FAB4
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_FAB4
+# endif
+# define machine_is_fab4()	(machine_arch_type == MACH_TYPE_FAB4)
+#else
+# define machine_is_fab4()	(0)
+#endif
+
+#ifdef CONFIG_MACH_HTCDIAMOND
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_HTCDIAMOND
+# endif
+# define machine_is_htcdiamond()	(machine_arch_type == MACH_TYPE_HTCDIAMOND)
+#else
+# define machine_is_htcdiamond()	(0)
+#endif
+
+#ifdef CONFIG_MACH_FIONA
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_FIONA
+# endif
+# define machine_is_fiona()	(machine_arch_type == MACH_TYPE_FIONA)
+#else
+# define machine_is_fiona()	(0)
+#endif
+
+#ifdef CONFIG_MACH_MXC30030_X
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_MXC30030_X
+# endif
+# define machine_is_mxc30030_x()	(machine_arch_type == MACH_TYPE_MXC30030_X)
+#else
+# define machine_is_mxc30030_x()	(0)
+#endif
+
+#ifdef CONFIG_MACH_BMP1000
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_BMP1000
+# endif
+# define machine_is_bmp1000()	(machine_arch_type == MACH_TYPE_BMP1000)
+#else
+# define machine_is_bmp1000()	(0)
+#endif
+
+#ifdef CONFIG_MACH_LOGI9200
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_LOGI9200
+# endif
+# define machine_is_logi9200()	(machine_arch_type == MACH_TYPE_LOGI9200)
+#else
+# define machine_is_logi9200()	(0)
+#endif
+
+#ifdef CONFIG_MACH_TQMA31
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_TQMA31
+# endif
+# define machine_is_tqma31()	(machine_arch_type == MACH_TYPE_TQMA31)
+#else
+# define machine_is_tqma31()	(0)
+#endif
+
+#ifdef CONFIG_MACH_CCW9P9215JS
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_CCW9P9215JS
+# endif
+# define machine_is_ccw9p9215js()	(machine_arch_type == MACH_TYPE_CCW9P9215JS)
+#else
+# define machine_is_ccw9p9215js()	(0)
+#endif
+
+#ifdef CONFIG_MACH_RD88F5181L_GE
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_RD88F5181L_GE
+# endif
+# define machine_is_rd88f5181l_ge()	(machine_arch_type == MACH_TYPE_RD88F5181L_GE)
+#else
+# define machine_is_rd88f5181l_ge()	(0)
+#endif
+
+#ifdef CONFIG_MACH_SIFMAIN
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_SIFMAIN
+# endif
+# define machine_is_sifmain()	(machine_arch_type == MACH_TYPE_SIFMAIN)
+#else
+# define machine_is_sifmain()	(0)
+#endif
+
+#ifdef CONFIG_MACH_SAM9_L9261
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_SAM9_L9261
+# endif
+# define machine_is_sam9_l9261()	(machine_arch_type == MACH_TYPE_SAM9_L9261)
+#else
+# define machine_is_sam9_l9261()	(0)
+#endif
+
+#ifdef CONFIG_MACH_CC9M2443JS
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_CC9M2443JS
+# endif
+# define machine_is_cc9m2443js()	(machine_arch_type == MACH_TYPE_CC9M2443JS)
+#else
+# define machine_is_cc9m2443js()	(0)
+#endif
+
+#ifdef CONFIG_MACH_XARIA300
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_XARIA300
+# endif
+# define machine_is_xaria300()	(machine_arch_type == MACH_TYPE_XARIA300)
+#else
+# define machine_is_xaria300()	(0)
+#endif
+
+#ifdef CONFIG_MACH_IT9200
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_IT9200
+# endif
+# define machine_is_it9200()	(machine_arch_type == MACH_TYPE_IT9200)
+#else
+# define machine_is_it9200()	(0)
+#endif
+
+#ifdef CONFIG_MACH_RD88F5181L_FXO
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_RD88F5181L_FXO
+# endif
+# define machine_is_rd88f5181l_fxo()	(machine_arch_type == MACH_TYPE_RD88F5181L_FXO)
+#else
+# define machine_is_rd88f5181l_fxo()	(0)
+#endif
+
+#ifdef CONFIG_MACH_KRISS_SENSOR
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_KRISS_SENSOR
+# endif
+# define machine_is_kriss_sensor()	(machine_arch_type == MACH_TYPE_KRISS_SENSOR)
+#else
+# define machine_is_kriss_sensor()	(0)
+#endif
+
+#ifdef CONFIG_MACH_PILZ_PMI5
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_PILZ_PMI5
+# endif
+# define machine_is_pilz_pmi5()	(machine_arch_type == MACH_TYPE_PILZ_PMI5)
+#else
+# define machine_is_pilz_pmi5()	(0)
+#endif
+
+#ifdef CONFIG_MACH_JADE
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_JADE
+# endif
+# define machine_is_jade()	(machine_arch_type == MACH_TYPE_JADE)
+#else
+# define machine_is_jade()	(0)
+#endif
+
+#ifdef CONFIG_MACH_KS8695_SOFTPLC
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_KS8695_SOFTPLC
+# endif
+# define machine_is_ks8695_softplc()	(machine_arch_type == MACH_TYPE_KS8695_SOFTPLC)
+#else
+# define machine_is_ks8695_softplc()	(0)
+#endif
+
+#ifdef CONFIG_MACH_GPRISC4
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_GPRISC4
+# endif
+# define machine_is_gprisc3()	(machine_arch_type == MACH_TYPE_GPRISC4)
+#else
+# define machine_is_gprisc3()	(0)
+#endif
+
+#ifdef CONFIG_MACH_STAMP9260
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_STAMP9260
+# endif
+# define machine_is_stamp9260()	(machine_arch_type == MACH_TYPE_STAMP9260)
+#else
+# define machine_is_stamp9260()	(0)
+#endif
+
+#ifdef CONFIG_MACH_SMDK6430
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_SMDK6430
+# endif
+# define machine_is_smdk6430()	(machine_arch_type == MACH_TYPE_SMDK6430)
+#else
+# define machine_is_smdk6430()	(0)
+#endif
+
+#ifdef CONFIG_MACH_SMDKC100
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_SMDKC100
+# endif
+# define machine_is_smdkc100()	(machine_arch_type == MACH_TYPE_SMDKC100)
+#else
+# define machine_is_smdkc100()	(0)
+#endif
+
+#ifdef CONFIG_MACH_TAVOREVB
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_TAVOREVB
+# endif
+# define machine_is_tavorevb()	(machine_arch_type == MACH_TYPE_TAVOREVB)
+#else
+# define machine_is_tavorevb()	(0)
+#endif
+
+#ifdef CONFIG_MACH_SAAR
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_SAAR
+# endif
+# define machine_is_saar()	(machine_arch_type == MACH_TYPE_SAAR)
+#else
+# define machine_is_saar()	(0)
+#endif
+
+#ifdef CONFIG_MACH_DEISTER_EYECAM
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_DEISTER_EYECAM
+# endif
+# define machine_is_deister_eyecam()	(machine_arch_type == MACH_TYPE_DEISTER_EYECAM)
+#else
+# define machine_is_deister_eyecam()	(0)
+#endif
+
+#ifdef CONFIG_MACH_AT91SAM9M10EK
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_AT91SAM9M10EK
+# endif
+# define machine_is_at91sam9m10ek()	(machine_arch_type == MACH_TYPE_AT91SAM9M10EK)
+#else
+# define machine_is_at91sam9m10ek()	(0)
+#endif
+
+#ifdef CONFIG_MACH_LINKSTATION_PRODUO
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_LINKSTATION_PRODUO
+# endif
+# define machine_is_linkstation_produo()	(machine_arch_type == MACH_TYPE_LINKSTATION_PRODUO)
+#else
+# define machine_is_linkstation_produo()	(0)
+#endif
+
+#ifdef CONFIG_MACH_HIT_B0
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_HIT_B0
+# endif
+# define machine_is_hit_b0()	(machine_arch_type == MACH_TYPE_HIT_B0)
+#else
+# define machine_is_hit_b0()	(0)
+#endif
+
+#ifdef CONFIG_MACH_ADX_RMU
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_ADX_RMU
+# endif
+# define machine_is_adx_rmu()	(machine_arch_type == MACH_TYPE_ADX_RMU)
+#else
+# define machine_is_adx_rmu()	(0)
+#endif
+
+#ifdef CONFIG_MACH_XG_CPE_MAIN
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_XG_CPE_MAIN
+# endif
+# define machine_is_xg_cpe_main()	(machine_arch_type == MACH_TYPE_XG_CPE_MAIN)
+#else
+# define machine_is_xg_cpe_main()	(0)
+#endif
+
+#ifdef CONFIG_MACH_EDB9407A
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_EDB9407A
+# endif
+# define machine_is_edb9407a()	(machine_arch_type == MACH_TYPE_EDB9407A)
+#else
+# define machine_is_edb9407a()	(0)
+#endif
+
+#ifdef CONFIG_MACH_DTB9608
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_DTB9608
+# endif
+# define machine_is_dtb9608()	(machine_arch_type == MACH_TYPE_DTB9608)
+#else
+# define machine_is_dtb9608()	(0)
+#endif
+
+#ifdef CONFIG_MACH_EM104V1
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_EM104V1
+# endif
+# define machine_is_em104v1()	(machine_arch_type == MACH_TYPE_EM104V1)
+#else
+# define machine_is_em104v1()	(0)
+#endif
+
+#ifdef CONFIG_MACH_DEMO
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_DEMO
+# endif
+# define machine_is_demo()	(machine_arch_type == MACH_TYPE_DEMO)
+#else
+# define machine_is_demo()	(0)
+#endif
+
+#ifdef CONFIG_MACH_LOGI9260
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_LOGI9260
+# endif
+# define machine_is_logi9260()	(machine_arch_type == MACH_TYPE_LOGI9260)
+#else
+# define machine_is_logi9260()	(0)
+#endif
+
+#ifdef CONFIG_MACH_MX31_EXM32
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_MX31_EXM32
+# endif
+# define machine_is_mx31_exm32()	(machine_arch_type == MACH_TYPE_MX31_EXM32)
+#else
+# define machine_is_mx31_exm32()	(0)
+#endif
+
+#ifdef CONFIG_MACH_USB_A9G20
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_USB_A9G20
+# endif
+# define machine_is_usb_a9g20()	(machine_arch_type == MACH_TYPE_USB_A9G20)
+#else
+# define machine_is_usb_a9g20()	(0)
+#endif
+
+#ifdef CONFIG_MACH_PICPROJE2008
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_PICPROJE2008
+# endif
+# define machine_is_picproje2008()	(machine_arch_type == MACH_TYPE_PICPROJE2008)
+#else
+# define machine_is_picproje2008()	(0)
+#endif
+
+#ifdef CONFIG_MACH_CS_E9315
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_CS_E9315
+# endif
+# define machine_is_cs_e9315()	(machine_arch_type == MACH_TYPE_CS_E9315)
+#else
+# define machine_is_cs_e9315()	(0)
+#endif
+
+#ifdef CONFIG_MACH_QIL_A9G20
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_QIL_A9G20
+# endif
+# define machine_is_qil_a9g20()	(machine_arch_type == MACH_TYPE_QIL_A9G20)
+#else
+# define machine_is_qil_a9g20()	(0)
+#endif
+
+#ifdef CONFIG_MACH_SHA_PON020
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_SHA_PON020
+# endif
+# define machine_is_sha_pon020()	(machine_arch_type == MACH_TYPE_SHA_PON020)
+#else
+# define machine_is_sha_pon020()	(0)
+#endif
+
+#ifdef CONFIG_MACH_NAD
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_NAD
+# endif
+# define machine_is_nad()	(machine_arch_type == MACH_TYPE_NAD)
+#else
+# define machine_is_nad()	(0)
+#endif
+
+#ifdef CONFIG_MACH_SBC35_A9260
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_SBC35_A9260
+# endif
+# define machine_is_sbc35_a9260()	(machine_arch_type == MACH_TYPE_SBC35_A9260)
+#else
+# define machine_is_sbc35_a9260()	(0)
+#endif
+
+#ifdef CONFIG_MACH_SBC35_A9G20
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_SBC35_A9G20
+# endif
+# define machine_is_sbc35_a9g20()	(machine_arch_type == MACH_TYPE_SBC35_A9G20)
+#else
+# define machine_is_sbc35_a9g20()	(0)
+#endif
+
+#ifdef CONFIG_MACH_DAVINCI_BEGINNING
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_DAVINCI_BEGINNING
+# endif
+# define machine_is_davinci_beginning()	(machine_arch_type == MACH_TYPE_DAVINCI_BEGINNING)
+#else
+# define machine_is_davinci_beginning()	(0)
+#endif
+
+#ifdef CONFIG_MACH_UWC
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_UWC
+# endif
+# define machine_is_uwc()	(machine_arch_type == MACH_TYPE_UWC)
+#else
+# define machine_is_uwc()	(0)
+#endif
+
+#ifdef CONFIG_MACH_MXLADS
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_MXLADS
+# endif
+# define machine_is_mxlads()	(machine_arch_type == MACH_TYPE_MXLADS)
+#else
+# define machine_is_mxlads()	(0)
+#endif
+
+#ifdef CONFIG_MACH_HTCNIKE
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_HTCNIKE
+# endif
+# define machine_is_htcnike()	(machine_arch_type == MACH_TYPE_HTCNIKE)
+#else
+# define machine_is_htcnike()	(0)
+#endif
+
+#ifdef CONFIG_MACH_DEISTER_PXA270
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_DEISTER_PXA270
+# endif
+# define machine_is_deister_pxa270()	(machine_arch_type == MACH_TYPE_DEISTER_PXA270)
+#else
+# define machine_is_deister_pxa270()	(0)
+#endif
+
+#ifdef CONFIG_MACH_CME9210JS
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_CME9210JS
+# endif
+# define machine_is_cme9210js()	(machine_arch_type == MACH_TYPE_CME9210JS)
+#else
+# define machine_is_cme9210js()	(0)
+#endif
+
+#ifdef CONFIG_MACH_CC9P9360
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_CC9P9360
+# endif
+# define machine_is_cc9p9360()	(machine_arch_type == MACH_TYPE_CC9P9360)
+#else
+# define machine_is_cc9p9360()	(0)
+#endif
+
+#ifdef CONFIG_MACH_MOCHA
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_MOCHA
+# endif
+# define machine_is_mocha()	(machine_arch_type == MACH_TYPE_MOCHA)
+#else
+# define machine_is_mocha()	(0)
+#endif
+
+#ifdef CONFIG_MACH_WAPD170AG
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_WAPD170AG
+# endif
+# define machine_is_wapd170ag()	(machine_arch_type == MACH_TYPE_WAPD170AG)
+#else
+# define machine_is_wapd170ag()	(0)
+#endif
+
+#ifdef CONFIG_MACH_LINKSTATION_MINI
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_LINKSTATION_MINI
+# endif
+# define machine_is_linkstation_mini()	(machine_arch_type == MACH_TYPE_LINKSTATION_MINI)
+#else
+# define machine_is_linkstation_mini()	(0)
+#endif
+
+#ifdef CONFIG_MACH_AFEB9260
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_AFEB9260
+# endif
+# define machine_is_afeb9260()	(machine_arch_type == MACH_TYPE_AFEB9260)
+#else
+# define machine_is_afeb9260()	(0)
+#endif
+
+#ifdef CONFIG_MACH_W90X900
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_W90X900
+# endif
+# define machine_is_w90x900()	(machine_arch_type == MACH_TYPE_W90X900)
+#else
+# define machine_is_w90x900()	(0)
+#endif
+
+#ifdef CONFIG_MACH_W90X700
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_W90X700
+# endif
+# define machine_is_w90x700()	(machine_arch_type == MACH_TYPE_W90X700)
+#else
+# define machine_is_w90x700()	(0)
+#endif
+
+#ifdef CONFIG_MACH_KT300IP
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_KT300IP
+# endif
+# define machine_is_kt300ip()	(machine_arch_type == MACH_TYPE_KT300IP)
+#else
+# define machine_is_kt300ip()	(0)
+#endif
+
+#ifdef CONFIG_MACH_KT300IP_G20
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_KT300IP_G20
+# endif
+# define machine_is_kt300ip_g20()	(machine_arch_type == MACH_TYPE_KT300IP_G20)
+#else
+# define machine_is_kt300ip_g20()	(0)
+#endif
+
+#ifdef CONFIG_MACH_SRCM
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_SRCM
+# endif
+# define machine_is_srcm()	(machine_arch_type == MACH_TYPE_SRCM)
+#else
+# define machine_is_srcm()	(0)
+#endif
+
+#ifdef CONFIG_MACH_WLNX_9260
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_WLNX_9260
+# endif
+# define machine_is_wlnx_9260()	(machine_arch_type == MACH_TYPE_WLNX_9260)
+#else
+# define machine_is_wlnx_9260()	(0)
+#endif
+
+#ifdef CONFIG_MACH_OPENMOKO_GTA03
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_OPENMOKO_GTA03
+# endif
+# define machine_is_openmoko_gta03()	(machine_arch_type == MACH_TYPE_OPENMOKO_GTA03)
+#else
+# define machine_is_openmoko_gta03()	(0)
+#endif
+
+#ifdef CONFIG_MACH_OSPREY2
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_OSPREY2
+# endif
+# define machine_is_osprey2()	(machine_arch_type == MACH_TYPE_OSPREY2)
+#else
+# define machine_is_osprey2()	(0)
+#endif
+
+#ifdef CONFIG_MACH_KBIO9260
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_KBIO9260
+# endif
+# define machine_is_kbio9260()	(machine_arch_type == MACH_TYPE_KBIO9260)
+#else
+# define machine_is_kbio9260()	(0)
+#endif
+
+#ifdef CONFIG_MACH_GINZA
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_GINZA
+# endif
+# define machine_is_ginza()	(machine_arch_type == MACH_TYPE_GINZA)
+#else
+# define machine_is_ginza()	(0)
+#endif
+
+#ifdef CONFIG_MACH_A636N
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_A636N
+# endif
+# define machine_is_a636n()	(machine_arch_type == MACH_TYPE_A636N)
+#else
+# define machine_is_a636n()	(0)
+#endif
+
+#ifdef CONFIG_MACH_IMX27IPCAM
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_IMX27IPCAM
+# endif
+# define machine_is_imx27ipcam()	(machine_arch_type == MACH_TYPE_IMX27IPCAM)
+#else
+# define machine_is_imx27ipcam()	(0)
+#endif
+
+#ifdef CONFIG_MACH_NEMOC
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_NEMOC
+# endif
+# define machine_is_nenoc()	(machine_arch_type == MACH_TYPE_NEMOC)
+#else
+# define machine_is_nenoc()	(0)
+#endif
+
+#ifdef CONFIG_MACH_GENEVA
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_GENEVA
+# endif
+# define machine_is_geneva()	(machine_arch_type == MACH_TYPE_GENEVA)
+#else
+# define machine_is_geneva()	(0)
+#endif
+
 /*
  * These have not yet been registered
  */
-/* #define MACH_TYPE_367                  <<not registered>> */
-#define machine_is_esl_wireless_tab()	(0)
 
 #ifndef machine_arch_type
 #define machine_arch_type	__machine_arch_type
diff --git a/include/asm-avr32/arch-at32ap700x/clk.h b/include/asm-avr32/arch-at32ap700x/clk.h
index 21545a3c1..d83e93b74 100644
--- a/include/asm-avr32/arch-at32ap700x/clk.h
+++ b/include/asm-avr32/arch-at32ap700x/clk.h
@@ -26,27 +26,28 @@
 #include <asm/arch/portmux.h>
 
 #ifdef CONFIG_PLL
-#define PLL0_RATE	((CFG_OSC0_HZ / CFG_PLL0_DIV) * CFG_PLL0_MUL)
+#define PLL0_RATE	((CONFIG_SYS_OSC0_HZ / CONFIG_SYS_PLL0_DIV)	\
+				* CONFIG_SYS_PLL0_MUL)
 #define MAIN_CLK_RATE	PLL0_RATE
 #else
-#define MAIN_CLK_RATE	(CFG_OSC0_HZ)
+#define MAIN_CLK_RATE	(CONFIG_SYS_OSC0_HZ)
 #endif
 
 static inline unsigned long get_cpu_clk_rate(void)
 {
-	return MAIN_CLK_RATE >> CFG_CLKDIV_CPU;
+	return MAIN_CLK_RATE >> CONFIG_SYS_CLKDIV_CPU;
 }
 static inline unsigned long get_hsb_clk_rate(void)
 {
-	return MAIN_CLK_RATE >> CFG_CLKDIV_HSB;
+	return MAIN_CLK_RATE >> CONFIG_SYS_CLKDIV_HSB;
 }
 static inline unsigned long get_pba_clk_rate(void)
 {
-	return MAIN_CLK_RATE >> CFG_CLKDIV_PBA;
+	return MAIN_CLK_RATE >> CONFIG_SYS_CLKDIV_PBA;
 }
 static inline unsigned long get_pbb_clk_rate(void)
 {
-	return MAIN_CLK_RATE >> CFG_CLKDIV_PBB;
+	return MAIN_CLK_RATE >> CONFIG_SYS_CLKDIV_PBB;
 }
 
 /* Accessors for specific devices. More will be added as needed. */
@@ -86,7 +87,7 @@ static inline unsigned long get_spi_clk_rate(unsigned int dev_id)
 extern void clk_init(void);
 
 /* Board code may need the SDRAM base clock as a compile-time constant */
-#define SDRAMC_BUS_HZ	(MAIN_CLK_RATE >> CFG_CLKDIV_HSB)
+#define SDRAMC_BUS_HZ	(MAIN_CLK_RATE >> CONFIG_SYS_CLKDIV_HSB)
 
 /* Generic clock control */
 enum gclk_parent {
@@ -124,11 +125,11 @@ static inline unsigned long gclk_set_rate(unsigned int id,
 
 	switch (parent) {
 	case GCLK_PARENT_OSC0:
-		parent_rate = CFG_OSC0_HZ;
+		parent_rate = CONFIG_SYS_OSC0_HZ;
 		break;
-#ifdef CFG_OSC1_HZ
+#ifdef CONFIG_SYS_OSC1_HZ
 	case GCLK_PARENT_OSC1:
-		parent_rate = CFG_OSC1_HZ;
+		parent_rate = CONFIG_SYS_OSC1_HZ;
 		break;
 #endif
 #ifdef PLL0_RATE
diff --git a/include/asm-avr32/global_data.h b/include/asm-avr32/global_data.h
index 007cfe4e7..97a6c6173 100644
--- a/include/asm-avr32/global_data.h
+++ b/include/asm-avr32/global_data.h
@@ -29,7 +29,7 @@
  * global variables during system initialization (until we have set
  * up the memory controller so that we can use RAM).
  *
- * Keep it *SMALL* and remember to set CFG_GBL_DATA_SIZE > sizeof(gd_t)
+ * Keep it *SMALL* and remember to set CONFIG_SYS_GBL_DATA_SIZE > sizeof(gd_t)
  */
 
 typedef	struct	global_data {
@@ -54,6 +54,7 @@ typedef	struct	global_data {
 #define GD_FLG_POSTFAIL	0x00008		/* Critical POST test failed	 */
 #define GD_FLG_POSTSTOP	0x00010		/* POST seqeunce aborted	 */
 #define GD_FLG_LOGINIT	0x00020		/* Log Buf has been initialized	 */
+#define GD_FLG_DISABLE_CONSOLE	0x00040		/* Disable console (in & out)	 */
 
 #define DECLARE_GLOBAL_DATA_PTR register gd_t *gd asm("r5")
 
diff --git a/include/asm-avr32/io.h b/include/asm-avr32/io.h
index 06e52b137..50967ac7e 100644
--- a/include/asm-avr32/io.h
+++ b/include/asm-avr32/io.h
@@ -76,12 +76,12 @@ extern void __readwrite_bug(const char *fn);
 #include <asm/addrspace.h>
 
 /* virt_to_phys will only work when address is in P1 or P2 */
-static __inline__ unsigned long virt_to_phys(volatile void *address)
+static inline phys_addr_t virt_to_phys(volatile void *address)
 {
 	return PHYSADDR(address);
 }
 
-static __inline__ void * phys_to_virt(unsigned long address)
+static inline void *phys_to_virt(phys_addr_t address)
 {
 	return (void *)P1SEGADDR(address);
 }
diff --git a/include/asm-blackfin/blackfin-config-post.h b/include/asm-blackfin/blackfin-config-post.h
index 6a1ffa17d..0ab68ace7 100644
--- a/include/asm-blackfin/blackfin-config-post.h
+++ b/include/asm-blackfin/blackfin-config-post.h
@@ -10,7 +10,7 @@
 #define __ASM_BLACKFIN_CONFIG_POST_H__
 
 /* Check to make sure everything fits in external RAM */
-#if ((CFG_MONITOR_BASE + CFG_MONITOR_LEN) > CFG_MAX_RAM_SIZE)
+#if ((CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN) > CONFIG_SYS_MAX_RAM_SIZE)
 # error Memory Map does not fit into configuration
 #endif
 
@@ -20,8 +20,8 @@
 #endif
 
 /* Make sure the structure is properly aligned */
-#if ((CFG_GBL_DATA_ADDR & -4) != CFG_GBL_DATA_ADDR)
-# error CFG_GBL_DATA_ADDR: must be 4 byte aligned
+#if ((CONFIG_SYS_GBL_DATA_ADDR & -4) != CONFIG_SYS_GBL_DATA_ADDR)
+# error CONFIG_SYS_GBL_DATA_ADDR: must be 4 byte aligned
 #endif
 
 /* Set default CONFIG_VCO_HZ if need be */
diff --git a/include/asm-blackfin/blackfin-config-pre.h b/include/asm-blackfin/blackfin-config-pre.h
index f2c44f78c..714352b1c 100644
--- a/include/asm-blackfin/blackfin-config-pre.h
+++ b/include/asm-blackfin/blackfin-config-pre.h
@@ -15,12 +15,12 @@
 #define ARRAY_SIZE(x) (sizeof(x) / sizeof((x)[0]))
 
 /* Configurable Blackfin-specific monitor commands */
-#define CFG_BFIN_CMD_BOOTLDR     0x01
-#define CFG_BFIN_CMD_CPLBINFO    0x02
-#define CFG_BFIN_CMD_OTP         0x04
-#define CFG_BFIN_CMD_CACHE_DUMP  0x08
+#define CONFIG_SYS_BFIN_CMD_BOOTLDR     0x01
+#define CONFIG_SYS_BFIN_CMD_CPLBINFO    0x02
+#define CONFIG_SYS_BFIN_CMD_OTP         0x04
+#define CONFIG_SYS_BFIN_CMD_CACHE_DUMP  0x08
 
-/* Bootmode defines -- your config needs to select this via BFIN_BOOT_MODE.
+/* Bootmode defines -- your config needs to select this via CONFIG_BFIN_BOOT_MODE.
  * Depending on your cpu, some of these may not be valid, check your HRM.
  * The actual values here are meaningless as long as they're unique.
  */
@@ -36,5 +36,6 @@
 #define BFIN_BOOT_MEM         10      /* boot ldr out of memory (warmboot) */
 #define BFIN_BOOT_16HOST_DMA  11      /* boot ldr from 16-bit host dma */
 #define BFIN_BOOT_8HOST_DMA   12      /* boot ldr from 8-bit host dma */
+#define BFIN_BOOT_NAND        13      /* boot ldr from nand flash */
 
 #endif
diff --git a/include/asm-blackfin/cplb.h b/include/asm-blackfin/cplb.h
index e36af2da3..cc21e93a1 100644
--- a/include/asm-blackfin/cplb.h
+++ b/include/asm-blackfin/cplb.h
@@ -73,9 +73,4 @@
 #define SDRAM_EBIU              (PAGE_SIZE_4MB | CPLB_WT | CPLB_L1_AOW | CPLB_USER_RD | CPLB_USER_WR | CPLB_SUPV_WR | CPLB_VALID | ANOMALY_05000158_WORKAROUND)
 #endif
 
-#if defined(CONFIG_BF561)
-#define page_descriptor_table_size (CONFIG_MEM_SIZE/4 + 1 + 4)	/* SDRAM +L1 + ASYNC_Memory */
-#else
-#define page_descriptor_table_size (CONFIG_MEM_SIZE/4 + 2)	/* SDRAM + L1 + ASYNC_Memory */
-#endif
 #endif				/* _CPLB_H */
diff --git a/include/asm-blackfin/global_data.h b/include/asm-blackfin/global_data.h
index b0b01e485..5c9903bb1 100644
--- a/include/asm-blackfin/global_data.h
+++ b/include/asm-blackfin/global_data.h
@@ -35,7 +35,7 @@
  * global variables during system initialization (until we have set
  * up the memory controller so that we can use RAM).
  *
- * Keep it *SMALL* and remember to set CFG_GBL_DATA_SIZE > sizeof(gd_t)
+ * Keep it *SMALL* and remember to set CONFIG_SYS_GBL_DATA_SIZE > sizeof(gd_t)
  */
 typedef struct global_data {
 	bd_t *bd;
@@ -64,6 +64,7 @@ typedef struct global_data {
 #define	GD_FLG_POSTFAIL	0x00008	/* Critical POST test failed     */
 #define	GD_FLG_POSTSTOP	0x00010	/* POST seqeunce aborted	 */
 #define	GD_FLG_LOGINIT	0x00020	/* Log Buf has been initialized	 */
+#define GD_FLG_DISABLE_CONSOLE	0x00040		/* Disable console (in & out)	 */
 
 #define DECLARE_GLOBAL_DATA_PTR     register gd_t * volatile gd asm ("P5")
 
diff --git a/include/asm-blackfin/io.h b/include/asm-blackfin/io.h
index da5891498..680649498 100644
--- a/include/asm-blackfin/io.h
+++ b/include/asm-blackfin/io.h
@@ -64,6 +64,11 @@ static inline void unmap_physmem(void *vaddr, unsigned long flags)
 
 }
 
+static inline phys_addr_t virt_to_phys(void * vaddr)
+{
+	return (phys_addr_t)(vaddr);
+}
+
 /*
  * These are for ISA/PCI shared memory _only_ and should never be used
  * on any other type of memory, including Zorro memory. They are meant to
diff --git a/include/asm-blackfin/mach-bf527/BF522_cdef.h b/include/asm-blackfin/mach-bf527/BF522_cdef.h
index 480168c16..987cc862c 100644
--- a/include/asm-blackfin/mach-bf527/BF522_cdef.h
+++ b/include/asm-blackfin/mach-bf527/BF522_cdef.h
@@ -337,8 +337,5 @@
 #define pTCOUNT                        ((uint32_t volatile *)TCOUNT) /* Core Timer Count Register */
 #define bfin_read_TCOUNT()             bfin_read32(TCOUNT)
 #define bfin_write_TCOUNT(val)         bfin_write32(TCOUNT, val)
-#define pDSPID                         ((uint32_t volatile *)DSPID)
-#define bfin_read_DSPID()              bfin_read32(DSPID)
-#define bfin_write_DSPID(val)          bfin_write32(DSPID, val)
 
 #endif /* __BFIN_CDEF_ADSP_BF522_proc__ */
diff --git a/include/asm-blackfin/mach-bf527/BF522_def.h b/include/asm-blackfin/mach-bf527/BF522_def.h
index ce3f8e541..44143ba89 100644
--- a/include/asm-blackfin/mach-bf527/BF522_def.h
+++ b/include/asm-blackfin/mach-bf527/BF522_def.h
@@ -119,7 +119,6 @@
 #define TPERIOD                        0xFFE03004 /* Core Timer Period Register */
 #define TSCALE                         0xFFE03008 /* Core Timer Scale Register */
 #define TCOUNT                         0xFFE0300C /* Core Timer Count Register */
-#define DSPID                          0xFFE05000
 #define L1_DATA_A_SRAM 0xFF800000 /* 0xFF800000 -> 0xFF803FFF Data Bank A SRAM */
 #define L1_DATA_A_SRAM_SIZE (0xFF803FFF - 0xFF800000 + 1)
 #define L1_DATA_A_SRAM_END (L1_DATA_A_SRAM + L1_DATA_A_SRAM_SIZE)
diff --git a/include/asm-blackfin/mach-bf527/BF523_cdef.h b/include/asm-blackfin/mach-bf527/BF523_cdef.h
index 9d3cb9eab..390f3dc16 100644
--- a/include/asm-blackfin/mach-bf527/BF523_cdef.h
+++ b/include/asm-blackfin/mach-bf527/BF523_cdef.h
@@ -337,8 +337,5 @@
 #define pTCOUNT                        ((uint32_t volatile *)TCOUNT) /* Core Timer Count Register */
 #define bfin_read_TCOUNT()             bfin_read32(TCOUNT)
 #define bfin_write_TCOUNT(val)         bfin_write32(TCOUNT, val)
-#define pDSPID                         ((uint32_t volatile *)DSPID)
-#define bfin_read_DSPID()              bfin_read32(DSPID)
-#define bfin_write_DSPID(val)          bfin_write32(DSPID, val)
 
 #endif /* __BFIN_CDEF_ADSP_BF523_proc__ */
diff --git a/include/asm-blackfin/mach-bf527/BF523_def.h b/include/asm-blackfin/mach-bf527/BF523_def.h
index cb15ec04c..02675a952 100644
--- a/include/asm-blackfin/mach-bf527/BF523_def.h
+++ b/include/asm-blackfin/mach-bf527/BF523_def.h
@@ -119,7 +119,6 @@
 #define TPERIOD                        0xFFE03004 /* Core Timer Period Register */
 #define TSCALE                         0xFFE03008 /* Core Timer Scale Register */
 #define TCOUNT                         0xFFE0300C /* Core Timer Count Register */
-#define DSPID                          0xFFE05000
 #define L1_DATA_A_SRAM 0xFF800000 /* 0xFF800000 -> 0xFF803FFF Data Bank A SRAM */
 #define L1_DATA_A_SRAM_SIZE (0xFF803FFF - 0xFF800000 + 1)
 #define L1_DATA_A_SRAM_END (L1_DATA_A_SRAM + L1_DATA_A_SRAM_SIZE)
diff --git a/include/asm-blackfin/mach-bf527/BF524_cdef.h b/include/asm-blackfin/mach-bf527/BF524_cdef.h
index 4373bd738..9ec89c66a 100644
--- a/include/asm-blackfin/mach-bf527/BF524_cdef.h
+++ b/include/asm-blackfin/mach-bf527/BF524_cdef.h
@@ -337,9 +337,6 @@
 #define pTCOUNT                        ((uint32_t volatile *)TCOUNT) /* Core Timer Count Register */
 #define bfin_read_TCOUNT()             bfin_read32(TCOUNT)
 #define bfin_write_TCOUNT(val)         bfin_write32(TCOUNT, val)
-#define pDSPID                         ((uint32_t volatile *)DSPID)
-#define bfin_read_DSPID()              bfin_read32(DSPID)
-#define bfin_write_DSPID(val)          bfin_write32(DSPID, val)
 #define pUSB_FADDR                     ((uint16_t volatile *)USB_FADDR) /* Function address register */
 #define bfin_read_USB_FADDR()          bfin_read16(USB_FADDR)
 #define bfin_write_USB_FADDR(val)      bfin_write16(USB_FADDR, val)
diff --git a/include/asm-blackfin/mach-bf527/BF524_def.h b/include/asm-blackfin/mach-bf527/BF524_def.h
index ef2fc0b36..10793e8ed 100644
--- a/include/asm-blackfin/mach-bf527/BF524_def.h
+++ b/include/asm-blackfin/mach-bf527/BF524_def.h
@@ -119,7 +119,6 @@
 #define TPERIOD                        0xFFE03004 /* Core Timer Period Register */
 #define TSCALE                         0xFFE03008 /* Core Timer Scale Register */
 #define TCOUNT                         0xFFE0300C /* Core Timer Count Register */
-#define DSPID                          0xFFE05000
 #define USB_FADDR                      0xFFC03800 /* Function address register */
 #define USB_POWER                      0xFFC03804 /* Power management register */
 #define USB_INTRTX                     0xFFC03808 /* Interrupt register for endpoint 0 and Tx endpoint 1 to 7 */
diff --git a/include/asm-blackfin/mach-bf527/BF525_cdef.h b/include/asm-blackfin/mach-bf527/BF525_cdef.h
index b406b101c..8fe29db07 100644
--- a/include/asm-blackfin/mach-bf527/BF525_cdef.h
+++ b/include/asm-blackfin/mach-bf527/BF525_cdef.h
@@ -337,9 +337,6 @@
 #define pTCOUNT                        ((uint32_t volatile *)TCOUNT) /* Core Timer Count Register */
 #define bfin_read_TCOUNT()             bfin_read32(TCOUNT)
 #define bfin_write_TCOUNT(val)         bfin_write32(TCOUNT, val)
-#define pDSPID                         ((uint32_t volatile *)DSPID)
-#define bfin_read_DSPID()              bfin_read32(DSPID)
-#define bfin_write_DSPID(val)          bfin_write32(DSPID, val)
 #define pUSB_FADDR                     ((uint16_t volatile *)USB_FADDR) /* Function address register */
 #define bfin_read_USB_FADDR()          bfin_read16(USB_FADDR)
 #define bfin_write_USB_FADDR(val)      bfin_write16(USB_FADDR, val)
diff --git a/include/asm-blackfin/mach-bf527/BF525_def.h b/include/asm-blackfin/mach-bf527/BF525_def.h
index a149eda26..c4c2f2f09 100644
--- a/include/asm-blackfin/mach-bf527/BF525_def.h
+++ b/include/asm-blackfin/mach-bf527/BF525_def.h
@@ -119,7 +119,6 @@
 #define TPERIOD                        0xFFE03004 /* Core Timer Period Register */
 #define TSCALE                         0xFFE03008 /* Core Timer Scale Register */
 #define TCOUNT                         0xFFE0300C /* Core Timer Count Register */
-#define DSPID                          0xFFE05000
 #define USB_FADDR                      0xFFC03800 /* Function address register */
 #define USB_POWER                      0xFFC03804 /* Power management register */
 #define USB_INTRTX                     0xFFC03808 /* Interrupt register for endpoint 0 and Tx endpoint 1 to 7 */
diff --git a/include/asm-blackfin/mach-bf527/BF526_cdef.h b/include/asm-blackfin/mach-bf527/BF526_cdef.h
index 765336357..943886210 100644
--- a/include/asm-blackfin/mach-bf527/BF526_cdef.h
+++ b/include/asm-blackfin/mach-bf527/BF526_cdef.h
@@ -337,9 +337,6 @@
 #define pTCOUNT                        ((uint32_t volatile *)TCOUNT) /* Core Timer Count Register */
 #define bfin_read_TCOUNT()             bfin_read32(TCOUNT)
 #define bfin_write_TCOUNT(val)         bfin_write32(TCOUNT, val)
-#define pDSPID                         ((uint32_t volatile *)DSPID)
-#define bfin_read_DSPID()              bfin_read32(DSPID)
-#define bfin_write_DSPID(val)          bfin_write32(DSPID, val)
 #define pEMAC_OPMODE                   ((uint32_t volatile *)EMAC_OPMODE) /* Operating Mode Register */
 #define bfin_read_EMAC_OPMODE()        bfin_read32(EMAC_OPMODE)
 #define bfin_write_EMAC_OPMODE(val)    bfin_write32(EMAC_OPMODE, val)
diff --git a/include/asm-blackfin/mach-bf527/BF526_def.h b/include/asm-blackfin/mach-bf527/BF526_def.h
index b432c7a3d..04db6c787 100644
--- a/include/asm-blackfin/mach-bf527/BF526_def.h
+++ b/include/asm-blackfin/mach-bf527/BF526_def.h
@@ -119,7 +119,6 @@
 #define TPERIOD                        0xFFE03004 /* Core Timer Period Register */
 #define TSCALE                         0xFFE03008 /* Core Timer Scale Register */
 #define TCOUNT                         0xFFE0300C /* Core Timer Count Register */
-#define DSPID                          0xFFE05000
 #define EMAC_OPMODE                    0xFFC03000 /* Operating Mode Register */
 #define EMAC_ADDRLO                    0xFFC03004 /* Address Low (32 LSBs) Register */
 #define EMAC_ADDRHI                    0xFFC03008 /* Address High (16 MSBs) Register */
diff --git a/include/asm-blackfin/mach-bf527/BF527_cdef.h b/include/asm-blackfin/mach-bf527/BF527_cdef.h
index 16c834264..fb9b30793 100644
--- a/include/asm-blackfin/mach-bf527/BF527_cdef.h
+++ b/include/asm-blackfin/mach-bf527/BF527_cdef.h
@@ -337,9 +337,6 @@
 #define pTCOUNT                        ((uint32_t volatile *)TCOUNT) /* Core Timer Count Register */
 #define bfin_read_TCOUNT()             bfin_read32(TCOUNT)
 #define bfin_write_TCOUNT(val)         bfin_write32(TCOUNT, val)
-#define pDSPID                         ((uint32_t volatile *)DSPID)
-#define bfin_read_DSPID()              bfin_read32(DSPID)
-#define bfin_write_DSPID(val)          bfin_write32(DSPID, val)
 #define pEMAC_OPMODE                   ((uint32_t volatile *)EMAC_OPMODE) /* Operating Mode Register */
 #define bfin_read_EMAC_OPMODE()        bfin_read32(EMAC_OPMODE)
 #define bfin_write_EMAC_OPMODE(val)    bfin_write32(EMAC_OPMODE, val)
diff --git a/include/asm-blackfin/mach-bf527/BF527_def.h b/include/asm-blackfin/mach-bf527/BF527_def.h
index 784d627cc..c1e1aab2c 100644
--- a/include/asm-blackfin/mach-bf527/BF527_def.h
+++ b/include/asm-blackfin/mach-bf527/BF527_def.h
@@ -119,7 +119,6 @@
 #define TPERIOD                        0xFFE03004 /* Core Timer Period Register */
 #define TSCALE                         0xFFE03008 /* Core Timer Scale Register */
 #define TCOUNT                         0xFFE0300C /* Core Timer Count Register */
-#define DSPID                          0xFFE05000
 #define EMAC_OPMODE                    0xFFC03000 /* Operating Mode Register */
 #define EMAC_ADDRLO                    0xFFC03004 /* Address Low (32 LSBs) Register */
 #define EMAC_ADDRHI                    0xFFC03008 /* Address High (16 MSBs) Register */
diff --git a/include/asm-blackfin/mach-bf527/anomaly.h b/include/asm-blackfin/mach-bf527/anomaly.h
index 058d95c89..7c5127eca 100644
--- a/include/asm-blackfin/mach-bf527/anomaly.h
+++ b/include/asm-blackfin/mach-bf527/anomaly.h
@@ -2,12 +2,12 @@
  * File: include/asm-blackfin/mach-bf527/anomaly.h
  * Bugs: Enter bugs at http://blackfin.uclinux.org/
  *
- * Copyright (C) 2004-2007 Analog Devices Inc.
+ * Copyright (C) 2004-2008 Analog Devices Inc.
  * Licensed under the GPL-2 or later.
  */
 
 /* This file shoule be up to date with:
- *  - Revision A, May 30, 2007; ADSP-BF527 Blackfin Processor Anomaly List
+ *  - Revision C, 01/25/2008; ADSP-BF527 Blackfin Processor Anomaly List
  */
 
 #ifndef _MACH_ANOMALY_H_
@@ -23,20 +23,66 @@
 #define ANOMALY_05000245 (1)
 /* Sensitivity To Noise with Slow Input Edge Rates on External SPORT TX and RX Clocks */
 #define ANOMALY_05000265 (1)
-/* Memory-To-Memory DMA Source/Destination Descriptors Must Be in Same Memory Space */
-#define ANOMALY_05000301 (1)
-/* Errors When SSYNC, CSYNC, or Loads to LT, LB and LC Registers Are Interrupted */
+/* Errors when SSYNC, CSYNC, or Loads to LT, LB and LC Registers Are Interrupted */
 #define ANOMALY_05000312 (1)
 /* Incorrect Access of OTP_STATUS During otp_write() Function */
 #define ANOMALY_05000328 (1)
 /* Disallowed Configuration Prevents Subsequent Allowed Configuration on Host DMA Port */
 #define ANOMALY_05000337 (1)
-/* TWI Does Not Operate Correctly Under Certain Signal Termination Conditions */
+/* Ethernet MAC MDIO Reads Do Not Meet IEEE Specification */
+#define ANOMALY_05000341 (1)
+/* TWI May Not Operate Correctly Under Certain Signal Termination Conditions */
 #define ANOMALY_05000342 (1)
-/* Boot ROM Kernel Incorrectly Alters Reset Value of USB Register */
+/* USB Calibration Value Is Not Initialized */
+#define ANOMALY_05000346 (1)
+/* Preboot Routine Incorrectly Alters Reset Value of USB Register */
 #define ANOMALY_05000347 (1)
+/* Security Features Are Not Functional */
+#define ANOMALY_05000348 (__SILICON_REVISION__ < 1)
+/* Regulator Programming Blocked when Hibernate Wakeup Source Remains Active */
+#define ANOMALY_05000355 (1)
+/* Serial Port (SPORT) Multichannel Transmit Failure when Channel 0 Is Disabled */
+#define ANOMALY_05000357 (1)
+/* Incorrect Revision Number in DSPID Register */
+#define ANOMALY_05000364 (__SILICON_REVISION__ > 0)
+/* PPI Underflow Error Goes Undetected in ITU-R 656 Mode */
+#define ANOMALY_05000366 (1)
+/* New Feature: Higher Default CCLK Rate */
+#define ANOMALY_05000368 (1)
 /* Possible RETS Register Corruption when Subroutine Is under 5 Cycles in Duration */
 #define ANOMALY_05000371 (1)
+/* Authentication Fails To Initiate */
+#define ANOMALY_05000376 (__SILICON_REVISION__ > 0)
+/* Data Read From L3 Memory by USB DMA May be Corrupted */
+#define ANOMALY_05000380 (1)
+/* USB Full-speed Mode not Fully Tested */
+#define ANOMALY_05000381 (1)
+/* New Feature: Boot from OTP Memory */
+#define ANOMALY_05000385 (1)
+/* New Feature: bfrom_SysControl() Routine */
+#define ANOMALY_05000386 (1)
+/* New Feature: Programmable Preboot Settings */
+#define ANOMALY_05000387 (1)
+/* Reset Vector Must Not Be in SDRAM Memory Space */
+#define ANOMALY_05000389 (1)
+/* New Feature: pTempCurrent Added to ADI_BOOT_DATA Structure */
+#define ANOMALY_05000392 (1)
+/* New Feature: dTempByteCount Value Increased in ADI_BOOT_DATA Structure */
+#define ANOMALY_05000393 (1)
+/* New Feature: Log Buffer Functionality */
+#define ANOMALY_05000394 (1)
+/* New Feature: Hook Routine Functionality */
+#define ANOMALY_05000395 (1)
+/* New Feature: Header Indirect Bit */
+#define ANOMALY_05000396 (1)
+/* New Feature: BK_ONES, BK_ZEROS, and BK_DATECODE Constants */
+#define ANOMALY_05000397 (1)
+/* New Feature: SWRESET, DFRESET and WDRESET Bits Added to SYSCR Register */
+#define ANOMALY_05000398 (1)
+/* New Feature: BCODE_NOBOOT Added to BCODE Field of SYSCR Register */
+#define ANOMALY_05000399 (1)
+/* PPI Data Signals D0 and D8 do not Tristate After Disabling PPI */
+#define ANOMALY_05000401 (1)
 
 /* Anomalies that don't exist on this proc */
 #define ANOMALY_05000125 (0)
@@ -49,7 +95,10 @@
 #define ANOMALY_05000263 (0)
 #define ANOMALY_05000266 (0)
 #define ANOMALY_05000273 (0)
+#define ANOMALY_05000307 (0)
 #define ANOMALY_05000311 (0)
 #define ANOMALY_05000323 (0)
+#define ANOMALY_05000353 (1)
+#define ANOMALY_05000363 (0)
 
 #endif
diff --git a/include/asm-blackfin/mach-bf533/anomaly.h b/include/asm-blackfin/mach-bf533/anomaly.h
index 98209d40a..7c34c3813 100644
--- a/include/asm-blackfin/mach-bf533/anomaly.h
+++ b/include/asm-blackfin/mach-bf533/anomaly.h
@@ -2,12 +2,12 @@
  * File: include/asm-blackfin/mach-bf533/anomaly.h
  * Bugs: Enter bugs at http://blackfin.uclinux.org/
  *
- * Copyright (C) 2004-2007 Analog Devices Inc.
+ * Copyright (C) 2004-2008 Analog Devices Inc.
  * Licensed under the GPL-2 or later.
  */
 
 /* This file shoule be up to date with:
- *  - Revision B, 12/10/2007; ADSP-BF531/BF532/BF533 Blackfin Processor Anomaly List
+ *  - Revision C, 02/08/2008; ADSP-BF531/BF532/BF533 Blackfin Processor Anomaly List
  */
 
 #ifndef _MACH_ANOMALY_H_
@@ -164,6 +164,8 @@
 #define ANOMALY_05000305 (__SILICON_REVISION__ < 5)
 /* New Feature: Additional PPI Frame Sync Sampling Options (Not Available On Older Silicon) */
 #define ANOMALY_05000306 (__SILICON_REVISION__ < 5)
+/* SCKELOW Bit Does Not Maintain State Through Hibernate */
+#define ANOMALY_05000307 (1)
 /* False Hardware Errors Caused by Fetches at the Boundary of Reserved Memory */
 #define ANOMALY_05000310 (1)
 /* Erroneous Flag (GPIO) Pin Operations under Specific Sequences */
@@ -176,6 +178,21 @@
 #define ANOMALY_05000315 (1)
 /* Internal Voltage Regulator Values of 1.05V, 1.10V and 1.15V Not Allowed for LQFP Packages */
 #define ANOMALY_05000319 (ANOMALY_BF531 || ANOMALY_BF532)
+/* Serial Port (SPORT) Multichannel Transmit Failure when Channel 0 Is Disabled */
+#define ANOMALY_05000357 (1)
+/* UART Break Signal Issues */
+#define ANOMALY_05000363 (__SILICON_REVISION__ < 5)
+/* PPI Underflow Error Goes Undetected in ITU-R 656 Mode */
+#define ANOMALY_05000366 (1)
+/* Possible RETS Register Corruption when Subroutine Is under 5 Cycles in Duration */
+#define ANOMALY_05000371 (1)
+/* PPI Does Not Start Properly In Specific Mode */
+#define ANOMALY_05000400 (__SILICON_REVISION__ >= 5)
+/* SSYNC Stalls Processor when Executed from Non-Cacheable Memory */
+#define ANOMALY_05000402 (__SILICON_REVISION__ >= 5)
+/* Level-Sensitive External GPIO Wakeups May Cause Indefinite Stall */
+#define ANOMALY_05000403 (1)
+
 
 /* These anomalies have been "phased" out of analog.com anomaly sheets and are
  * here to show running on older silicon just isn't feasible.
@@ -249,15 +266,10 @@
 #define ANOMALY_05000192 (__SILICON_REVISION__ < 3)
 /* Internal Voltage Regulator may not start up */
 #define ANOMALY_05000206 (__SILICON_REVISION__ < 3)
-/* Serial Port (SPORT) Multichannel Transmit Failure when Channel 0 Is Disabled */
-#define ANOMALY_05000357 (1)
-/* PPI Underflow Error Goes Undetected in ITU-R 656 Mode */
-#define ANOMALY_05000366 (1)
-/* Possible RETS Register Corruption when Subroutine Is under 5 Cycles in Duration */
-#define ANOMALY_05000371 (1)
 
 /* Anomalies that don't exist on this proc */
 #define ANOMALY_05000266 (0)
 #define ANOMALY_05000323 (0)
+#define ANOMALY_05000353 (1)
 
 #endif
diff --git a/include/asm-blackfin/mach-bf537/ADSP-EDN-BF534-extended_cdef.h b/include/asm-blackfin/mach-bf537/ADSP-EDN-BF534-extended_cdef.h
index b000ea2eb..b9e4d6770 100644
--- a/include/asm-blackfin/mach-bf537/ADSP-EDN-BF534-extended_cdef.h
+++ b/include/asm-blackfin/mach-bf537/ADSP-EDN-BF534-extended_cdef.h
@@ -2721,9 +2721,6 @@
 #define pTCOUNT                        ((uint32_t volatile *)TCOUNT) /* Core Timer Count Register */
 #define bfin_read_TCOUNT()             bfin_read32(TCOUNT)
 #define bfin_write_TCOUNT(val)         bfin_write32(TCOUNT, val)
-#define pDSPID                         ((uint32_t volatile *)DSPID)
-#define bfin_read_DSPID()              bfin_read32(DSPID)
-#define bfin_write_DSPID(val)          bfin_write32(DSPID, val)
 #define pCHIPID                        ((uint32_t volatile *)CHIPID)
 #define bfin_read_CHIPID()             bfin_read32(CHIPID)
 #define bfin_write_CHIPID(val)         bfin_write32(CHIPID, val)
diff --git a/include/asm-blackfin/mach-bf537/ADSP-EDN-BF534-extended_def.h b/include/asm-blackfin/mach-bf537/ADSP-EDN-BF534-extended_def.h
index 077412a69..61ffa148e 100644
--- a/include/asm-blackfin/mach-bf537/ADSP-EDN-BF534-extended_def.h
+++ b/include/asm-blackfin/mach-bf537/ADSP-EDN-BF534-extended_def.h
@@ -911,7 +911,6 @@
 #define TPERIOD                        0xFFE03004 /* Core Timer Period Register */
 #define TSCALE                         0xFFE03008 /* Core Timer Scale Register */
 #define TCOUNT                         0xFFE0300C /* Core Timer Count Register */
-#define DSPID                          0xFFE05000
 #define CHIPID                         0xFFC00014
 #define TBUFCTL                        0xFFE06000 /* Trace Buffer Control Register */
 #define TBUFSTAT                       0xFFE06004 /* Trace Buffer Status Register */
diff --git a/include/asm-blackfin/mach-bf537/anomaly.h b/include/asm-blackfin/mach-bf537/anomaly.h
index d604457f9..8d7f30579 100644
--- a/include/asm-blackfin/mach-bf537/anomaly.h
+++ b/include/asm-blackfin/mach-bf537/anomaly.h
@@ -2,12 +2,12 @@
  * File: include/asm-blackfin/mach-bf537/anomaly.h
  * Bugs: Enter bugs at http://blackfin.uclinux.org/
  *
- * Copyright (C) 2004-2007 Analog Devices Inc.
+ * Copyright (C) 2004-2008 Analog Devices Inc.
  * Licensed under the GPL-2 or later.
  */
 
 /* This file shoule be up to date with:
- *  - Revision A, 09/04/2007; ADSP-BF534/ADSP-BF536/ADSP-BF537 Blackfin Processor Anomaly List
+ *  - Revision C, 02/08/2008; ADSP-BF534/ADSP-BF536/ADSP-BF537 Blackfin Processor Anomaly List
  */
 
 #ifndef _MACH_ANOMALY_H_
@@ -132,12 +132,22 @@
 #define ANOMALY_05000322 (1)
 /* Ethernet MAC MDIO Reads Do Not Meet IEEE Specification */
 #define ANOMALY_05000341 (__SILICON_REVISION__ >= 3)
+/* New Feature: UART Remains Enabled after UART Boot */
+#define ANOMALY_05000350 (__SILICON_REVISION__ >= 3)
+/* Regulator Programming Blocked when Hibernate Wakeup Source Remains Active */
+#define ANOMALY_05000355 (1)
 /* Serial Port (SPORT) Multichannel Transmit Failure when Channel 0 Is Disabled */
 #define ANOMALY_05000357 (1)
 /* DMAs that Go Urgent during Tight Core Writes to External Memory Are Blocked */
 #define ANOMALY_05000359 (1)
+/* PPI Underflow Error Goes Undetected in ITU-R 656 Mode */
+#define ANOMALY_05000366 (1)
 /* Possible RETS Register Corruption when Subroutine Is under 5 Cycles in Duration */
 #define ANOMALY_05000371 (1)
+/* SSYNC Stalls Processor when Executed from Non-Cacheable Memory */
+#define ANOMALY_05000402 (__SILICON_REVISION__ >= 5)
+/* Level-Sensitive External GPIO Wakeups May Cause Indefinite Stall */
+#define ANOMALY_05000403 (1)
 
 /* Anomalies that don't exist on this proc */
 #define ANOMALY_05000125 (0)
@@ -148,5 +158,7 @@
 #define ANOMALY_05000266 (0)
 #define ANOMALY_05000311 (0)
 #define ANOMALY_05000323 (0)
+#define ANOMALY_05000353 (1)
+#define ANOMALY_05000363 (0)
 
 #endif
diff --git a/include/asm-blackfin/mach-bf548/BF541_cdef.h b/include/asm-blackfin/mach-bf548/BF541_cdef.h
index c0d2a4223..1b8c79b59 100644
--- a/include/asm-blackfin/mach-bf548/BF541_cdef.h
+++ b/include/asm-blackfin/mach-bf548/BF541_cdef.h
@@ -310,9 +310,6 @@
 #define pIPRIO                         ((uint32_t volatile *)IPRIO) /* Interrupt Priority Register */
 #define bfin_read_IPRIO()              bfin_read32(IPRIO)
 #define bfin_write_IPRIO(val)          bfin_write32(IPRIO, val)
-#define pDSPID                         ((uint32_t volatile *)DSPID)
-#define bfin_read_DSPID()              bfin_read32(DSPID)
-#define bfin_write_DSPID(val)          bfin_write32(DSPID, val)
 #define pTBUFCTL                       ((uint32_t volatile *)TBUFCTL) /* Trace Buffer Control Register */
 #define bfin_read_TBUFCTL()            bfin_read32(TBUFCTL)
 #define bfin_write_TBUFCTL(val)        bfin_write32(TBUFCTL, val)
diff --git a/include/asm-blackfin/mach-bf548/BF541_def.h b/include/asm-blackfin/mach-bf548/BF541_def.h
index 2f9cec696..1469ac2db 100644
--- a/include/asm-blackfin/mach-bf548/BF541_def.h
+++ b/include/asm-blackfin/mach-bf548/BF541_def.h
@@ -110,7 +110,6 @@
 #define IMASK                          0xFFE02104 /* Interrupt Mask Register */
 #define IPEND                          0xFFE02108 /* Interrupt Pending Register */
 #define IPRIO                          0xFFE02110 /* Interrupt Priority Register */
-#define DSPID                          0xFFE05000
 #define TBUFCTL                        0xFFE06000 /* Trace Buffer Control Register */
 #define TBUFSTAT                       0xFFE06004 /* Trace Buffer Status Register */
 #define TBUF                           0xFFE06100 /* Trace Buffer */
diff --git a/include/asm-blackfin/mach-bf548/BF542_cdef.h b/include/asm-blackfin/mach-bf548/BF542_cdef.h
index be48dfd52..306b5f117 100644
--- a/include/asm-blackfin/mach-bf548/BF542_cdef.h
+++ b/include/asm-blackfin/mach-bf548/BF542_cdef.h
@@ -310,9 +310,6 @@
 #define pIPRIO                         ((uint32_t volatile *)IPRIO) /* Interrupt Priority Register */
 #define bfin_read_IPRIO()              bfin_read32(IPRIO)
 #define bfin_write_IPRIO(val)          bfin_write32(IPRIO, val)
-#define pDSPID                         ((uint32_t volatile *)DSPID)
-#define bfin_read_DSPID()              bfin_read32(DSPID)
-#define bfin_write_DSPID(val)          bfin_write32(DSPID, val)
 #define pTBUFCTL                       ((uint32_t volatile *)TBUFCTL) /* Trace Buffer Control Register */
 #define bfin_read_TBUFCTL()            bfin_read32(TBUFCTL)
 #define bfin_write_TBUFCTL(val)        bfin_write32(TBUFCTL, val)
diff --git a/include/asm-blackfin/mach-bf548/BF542_def.h b/include/asm-blackfin/mach-bf548/BF542_def.h
index c2be4de10..40fe555c8 100644
--- a/include/asm-blackfin/mach-bf548/BF542_def.h
+++ b/include/asm-blackfin/mach-bf548/BF542_def.h
@@ -110,7 +110,6 @@
 #define IMASK                          0xFFE02104 /* Interrupt Mask Register */
 #define IPEND                          0xFFE02108 /* Interrupt Pending Register */
 #define IPRIO                          0xFFE02110 /* Interrupt Priority Register */
-#define DSPID                          0xFFE05000
 #define TBUFCTL                        0xFFE06000 /* Trace Buffer Control Register */
 #define TBUFSTAT                       0xFFE06004 /* Trace Buffer Status Register */
 #define TBUF                           0xFFE06100 /* Trace Buffer */
diff --git a/include/asm-blackfin/mach-bf548/BF544_cdef.h b/include/asm-blackfin/mach-bf548/BF544_cdef.h
index b3232fcf3..47ef6e17b 100644
--- a/include/asm-blackfin/mach-bf548/BF544_cdef.h
+++ b/include/asm-blackfin/mach-bf548/BF544_cdef.h
@@ -310,9 +310,6 @@
 #define pIPRIO                         ((uint32_t volatile *)IPRIO) /* Interrupt Priority Register */
 #define bfin_read_IPRIO()              bfin_read32(IPRIO)
 #define bfin_write_IPRIO(val)          bfin_write32(IPRIO, val)
-#define pDSPID                         ((uint32_t volatile *)DSPID)
-#define bfin_read_DSPID()              bfin_read32(DSPID)
-#define bfin_write_DSPID(val)          bfin_write32(DSPID, val)
 #define pTBUFCTL                       ((uint32_t volatile *)TBUFCTL) /* Trace Buffer Control Register */
 #define bfin_read_TBUFCTL()            bfin_read32(TBUFCTL)
 #define bfin_write_TBUFCTL(val)        bfin_write32(TBUFCTL, val)
diff --git a/include/asm-blackfin/mach-bf548/BF544_def.h b/include/asm-blackfin/mach-bf548/BF544_def.h
index 834b7a653..042e2ac82 100644
--- a/include/asm-blackfin/mach-bf548/BF544_def.h
+++ b/include/asm-blackfin/mach-bf548/BF544_def.h
@@ -110,7 +110,6 @@
 #define IMASK                          0xFFE02104 /* Interrupt Mask Register */
 #define IPEND                          0xFFE02108 /* Interrupt Pending Register */
 #define IPRIO                          0xFFE02110 /* Interrupt Priority Register */
-#define DSPID                          0xFFE05000
 #define TBUFCTL                        0xFFE06000 /* Trace Buffer Control Register */
 #define TBUFSTAT                       0xFFE06004 /* Trace Buffer Status Register */
 #define TBUF                           0xFFE06100 /* Trace Buffer */
diff --git a/include/asm-blackfin/mach-bf548/BF547_cdef.h b/include/asm-blackfin/mach-bf548/BF547_cdef.h
index e1a1daffb..42d041a74 100644
--- a/include/asm-blackfin/mach-bf548/BF547_cdef.h
+++ b/include/asm-blackfin/mach-bf548/BF547_cdef.h
@@ -310,9 +310,6 @@
 #define pIPRIO                         ((uint32_t volatile *)IPRIO) /* Interrupt Priority Register */
 #define bfin_read_IPRIO()              bfin_read32(IPRIO)
 #define bfin_write_IPRIO(val)          bfin_write32(IPRIO, val)
-#define pDSPID                         ((uint32_t volatile *)DSPID)
-#define bfin_read_DSPID()              bfin_read32(DSPID)
-#define bfin_write_DSPID(val)          bfin_write32(DSPID, val)
 #define pTBUFCTL                       ((uint32_t volatile *)TBUFCTL) /* Trace Buffer Control Register */
 #define bfin_read_TBUFCTL()            bfin_read32(TBUFCTL)
 #define bfin_write_TBUFCTL(val)        bfin_write32(TBUFCTL, val)
diff --git a/include/asm-blackfin/mach-bf548/BF547_def.h b/include/asm-blackfin/mach-bf548/BF547_def.h
index bb7ae5ecc..1cb338154 100644
--- a/include/asm-blackfin/mach-bf548/BF547_def.h
+++ b/include/asm-blackfin/mach-bf548/BF547_def.h
@@ -110,7 +110,6 @@
 #define IMASK                          0xFFE02104 /* Interrupt Mask Register */
 #define IPEND                          0xFFE02108 /* Interrupt Pending Register */
 #define IPRIO                          0xFFE02110 /* Interrupt Priority Register */
-#define DSPID                          0xFFE05000
 #define TBUFCTL                        0xFFE06000 /* Trace Buffer Control Register */
 #define TBUFSTAT                       0xFFE06004 /* Trace Buffer Status Register */
 #define TBUF                           0xFFE06100 /* Trace Buffer */
diff --git a/include/asm-blackfin/mach-bf548/BF548_cdef.h b/include/asm-blackfin/mach-bf548/BF548_cdef.h
index 6cdfbf3d5..cf02834e9 100644
--- a/include/asm-blackfin/mach-bf548/BF548_cdef.h
+++ b/include/asm-blackfin/mach-bf548/BF548_cdef.h
@@ -310,9 +310,6 @@
 #define pIPRIO                         ((uint32_t volatile *)IPRIO) /* Interrupt Priority Register */
 #define bfin_read_IPRIO()              bfin_read32(IPRIO)
 #define bfin_write_IPRIO(val)          bfin_write32(IPRIO, val)
-#define pDSPID                         ((uint32_t volatile *)DSPID)
-#define bfin_read_DSPID()              bfin_read32(DSPID)
-#define bfin_write_DSPID(val)          bfin_write32(DSPID, val)
 #define pTBUFCTL                       ((uint32_t volatile *)TBUFCTL) /* Trace Buffer Control Register */
 #define bfin_read_TBUFCTL()            bfin_read32(TBUFCTL)
 #define bfin_write_TBUFCTL(val)        bfin_write32(TBUFCTL, val)
diff --git a/include/asm-blackfin/mach-bf548/BF548_def.h b/include/asm-blackfin/mach-bf548/BF548_def.h
index e72510209..950ce4325 100644
--- a/include/asm-blackfin/mach-bf548/BF548_def.h
+++ b/include/asm-blackfin/mach-bf548/BF548_def.h
@@ -110,7 +110,6 @@
 #define IMASK                          0xFFE02104 /* Interrupt Mask Register */
 #define IPEND                          0xFFE02108 /* Interrupt Pending Register */
 #define IPRIO                          0xFFE02110 /* Interrupt Priority Register */
-#define DSPID                          0xFFE05000
 #define TBUFCTL                        0xFFE06000 /* Trace Buffer Control Register */
 #define TBUFSTAT                       0xFFE06004 /* Trace Buffer Status Register */
 #define TBUF                           0xFFE06100 /* Trace Buffer */
diff --git a/include/asm-blackfin/mach-bf548/BF549_cdef.h b/include/asm-blackfin/mach-bf548/BF549_cdef.h
index 9ac8c2dd4..3514ceff4 100644
--- a/include/asm-blackfin/mach-bf548/BF549_cdef.h
+++ b/include/asm-blackfin/mach-bf548/BF549_cdef.h
@@ -310,9 +310,6 @@
 #define pIPRIO                         ((uint32_t volatile *)IPRIO) /* Interrupt Priority Register */
 #define bfin_read_IPRIO()              bfin_read32(IPRIO)
 #define bfin_write_IPRIO(val)          bfin_write32(IPRIO, val)
-#define pDSPID                         ((uint32_t volatile *)DSPID)
-#define bfin_read_DSPID()              bfin_read32(DSPID)
-#define bfin_write_DSPID(val)          bfin_write32(DSPID, val)
 #define pTBUFCTL                       ((uint32_t volatile *)TBUFCTL) /* Trace Buffer Control Register */
 #define bfin_read_TBUFCTL()            bfin_read32(TBUFCTL)
 #define bfin_write_TBUFCTL(val)        bfin_write32(TBUFCTL, val)
diff --git a/include/asm-blackfin/mach-bf548/BF549_def.h b/include/asm-blackfin/mach-bf548/BF549_def.h
index f36ecd6ce..55b0a296c 100644
--- a/include/asm-blackfin/mach-bf548/BF549_def.h
+++ b/include/asm-blackfin/mach-bf548/BF549_def.h
@@ -110,7 +110,6 @@
 #define IMASK                          0xFFE02104 /* Interrupt Mask Register */
 #define IPEND                          0xFFE02108 /* Interrupt Pending Register */
 #define IPRIO                          0xFFE02110 /* Interrupt Priority Register */
-#define DSPID                          0xFFE05000
 #define TBUFCTL                        0xFFE06000 /* Trace Buffer Control Register */
 #define TBUFSTAT                       0xFFE06004 /* Trace Buffer Status Register */
 #define TBUF                           0xFFE06100 /* Trace Buffer */
diff --git a/include/asm-blackfin/mach-bf548/anomaly.h b/include/asm-blackfin/mach-bf548/anomaly.h
index 0451ea7b8..1dc75ef1a 100644
--- a/include/asm-blackfin/mach-bf548/anomaly.h
+++ b/include/asm-blackfin/mach-bf548/anomaly.h
@@ -2,18 +2,18 @@
  * File: include/asm-blackfin/mach-bf548/anomaly.h
  * Bugs: Enter bugs at http://blackfin.uclinux.org/
  *
- * Copyright (C) 2004-2007 Analog Devices Inc.
+ * Copyright (C) 2004-2008 Analog Devices Inc.
  * Licensed under the GPL-2 or later.
  */
 
 /* This file shoule be up to date with:
- *  - Revision E, 11/28/2007; ADSP-BF542/BF544/BF547/BF548/BF549 Blackfin Processor Anomaly List
+ *  - Revision F, 06/11/2008; ADSP-BF542/BF544/BF547/BF548/BF549 Blackfin Processor Anomaly List
  */
 
 #ifndef _MACH_ANOMALY_H_
 #define _MACH_ANOMALY_H_
 
-/* Multi-Issue Instruction with dsp32shiftimm in slot1 and P-reg Store in slot 2 Not Supported */
+/* Multi-Issue Instruction with dsp32shiftimm in slot1 and P-reg Store in slot2 Not Supported */
 #define ANOMALY_05000074 (1)
 /* DMA_RUN Bit Is Not Valid after a Peripheral Receive Channel DMA Stops */
 #define ANOMALY_05000119 (1)
@@ -43,7 +43,7 @@
 #define ANOMALY_05000328 (__SILICON_REVISION__ < 1)
 /* Synchronous Burst Flash Boot Mode Is Not Functional */
 #define ANOMALY_05000329 (__SILICON_REVISION__ < 1)
-/* Host DMA Boot Mode Is Not Functional */
+/* Host DMA Boot Modes Are Not Functional */
 #define ANOMALY_05000330 (__SILICON_REVISION__ < 1)
 /* Inadequate Timing Margins on DDR DQS to DQ and DQM Skew */
 #define ANOMALY_05000334 (__SILICON_REVISION__ < 1)
@@ -61,26 +61,90 @@
 #define ANOMALY_05000344 (__SILICON_REVISION__ < 1)
 /* USB Calibration Value Is Not Intialized */
 #define ANOMALY_05000346 (__SILICON_REVISION__ < 1)
-/* Boot ROM Kernel Incorrectly Alters Reset Value of USB Register */
+/* Preboot Routine Incorrectly Alters Reset Value of USB Register */
 #define ANOMALY_05000347 (__SILICON_REVISION__ < 1)
 /* Data Lost when Core Reads SDH Data FIFO */
 #define ANOMALY_05000349 (__SILICON_REVISION__ < 1)
 /* PLL Status Register Is Inaccurate */
 #define ANOMALY_05000351 (__SILICON_REVISION__ < 1)
+/* bfrom_SysControl() Firmware Function Performs Improper System Reset */
+#define ANOMALY_05000353 (1)
+/* Regulator Programming Blocked when Hibernate Wakeup Source Remains Active */
+#define ANOMALY_05000355 (__SILICON_REVISION__ < 1)
+/* System Stalled During A Core Access To AMC While A Core Access To NFC FIFO Is Required */
+#define ANOMALY_05000356 (__SILICON_REVISION__ < 1)
 /* Serial Port (SPORT) Multichannel Transmit Failure when Channel 0 Is Disabled */
 #define ANOMALY_05000357 (1)
 /* External Memory Read Access Hangs Core With PLL Bypass */
 #define ANOMALY_05000360 (1)
 /* DMAs that Go Urgent during Tight Core Writes to External Memory Are Blocked */
 #define ANOMALY_05000365 (1)
+/* WURESET Bit In SYSCR Register Does Not Properly Indicate Hibernate Wake-Up */
+#define ANOMALY_05000367 (__SILICON_REVISION__ < 1)
 /* Addressing Conflict between Boot ROM and Asynchronous Memory */
 #define ANOMALY_05000369 (1)
+/* Default PLL MSEL and SSEL Settings Can Cause 400MHz Product To Violate Specifications */
+#define ANOMALY_05000370 (__SILICON_REVISION__ < 1)
 /* Possible RETS Register Corruption when Subroutine Is under 5 Cycles in Duration */
-#define ANOMALY_05000371 (__SILICON_REVISION__ < 1)
+#define ANOMALY_05000371 (1)
+/* USB DP/DM Data Pins May Lose State When Entering Hibernate */
+#define ANOMALY_05000372 (__SILICON_REVISION__ < 1)
 /* Mobile DDR Operation Not Functional */
 #define ANOMALY_05000377 (1)
 /* Security/Authentication Speedpath Causes Authentication To Fail To Initiate */
 #define ANOMALY_05000378 (1)
+/* 16-Bit NAND FLASH Boot Mode Is Not Functional */
+#define ANOMALY_05000379 (1)
+/* 8-Bit NAND Flash Boot Mode Not Functional */
+#define ANOMALY_05000382 (__SILICON_REVISION__ < 1)
+/* Some ATAPI Modes Are Not Functional */
+#define ANOMALY_05000383 (1)
+/* Boot from OTP Memory Not Functional */
+#define ANOMALY_05000385 (__SILICON_REVISION__ < 1)
+/* bfrom_SysControl() Firmware Routine Not Functional */
+#define ANOMALY_05000386 (__SILICON_REVISION__ < 1)
+/* Programmable Preboot Settings Not Functional */
+#define ANOMALY_05000387 (__SILICON_REVISION__ < 1)
+/* CRC32 Checksum Support Not Functional */
+#define ANOMALY_05000388 (__SILICON_REVISION__ < 1)
+/* Reset Vector Must Not Be in SDRAM Memory Space */
+#define ANOMALY_05000389 (__SILICON_REVISION__ < 1)
+/* Changed Meaning of BCODE Field in SYSCR Register */
+#define ANOMALY_05000390 (__SILICON_REVISION__ < 1)
+/* Repeated Boot from Page-Mode or Burst-Mode Flash Memory May Fail */
+#define ANOMALY_05000391 (__SILICON_REVISION__ < 1)
+/* pTempCurrent Not Present in ADI_BOOT_DATA Structure */
+#define ANOMALY_05000392 (__SILICON_REVISION__ < 1)
+/* Deprecated Value of dTempByteCount in ADI_BOOT_DATA Structure */
+#define ANOMALY_05000393 (__SILICON_REVISION__ < 1)
+/* Log Buffer Not Functional */
+#define ANOMALY_05000394 (__SILICON_REVISION__ < 1)
+/* Hook Routine Not Functional */
+#define ANOMALY_05000395 (__SILICON_REVISION__ < 1)
+/* Header Indirect Bit Not Functional */
+#define ANOMALY_05000396 (__SILICON_REVISION__ < 1)
+/* BK_ONES, BK_ZEROS, and BK_DATECODE Constants Not Functional */
+#define ANOMALY_05000397 (__SILICON_REVISION__ < 1)
+/* Lockbox SESR Disallows Certain User Interrupts */
+#define ANOMALY_05000404 (1)
+/* Lockbox SESR Firmware Does Not Save/Restore Full Context */
+#define ANOMALY_05000405 (1)
+/* Lockbox SESR Argument Checking Does Not Check L2 Memory Protection Range */
+#define ANOMALY_05000406 (1)
+/* Lockbox SESR Firmware Arguments Are Not Retained After First Initialization */
+#define ANOMALY_05000407 (1)
+/* Lockbox Firmware Memory Cleanup Routine Does not Clear Registers */
+#define ANOMALY_05000408 (1)
+/* Lockbox firmware leaves MDMA0 channel enabled */
+#define ANOMALY_05000409 (1)
+/* bfrom_SysControl() Firmware Function Cannot be Used to Enter Power Saving Modes */
+#define ANOMALY_05000411 (1)
+/* FIFO Boot Mode Is Not Functional */
+#define ANOMALY_05000412 (1)
+/* NAND Boot Mode Not Compatible With Some NAND Flash Devices */
+#define ANOMALY_05000413 (1)
+/* OTP_CHECK_FOR_PREV_WRITE Bit is Not Functional in bfrom_OtpWrite() API */
+#define ANOMALY_05000414 (1)
 
 /* Anomalies that don't exist on this proc */
 #define ANOMALY_05000125 (0)
@@ -93,7 +157,9 @@
 #define ANOMALY_05000263 (0)
 #define ANOMALY_05000266 (0)
 #define ANOMALY_05000273 (0)
+#define ANOMALY_05000307 (0)
 #define ANOMALY_05000311 (0)
 #define ANOMALY_05000323 (0)
+#define ANOMALY_05000363 (0)
 
 #endif
diff --git a/include/asm-blackfin/mach-bf548/ports.h b/include/asm-blackfin/mach-bf548/ports.h
index c9bd28718..c8285163f 100644
--- a/include/asm-blackfin/mach-bf548/ports.h
+++ b/include/asm-blackfin/mach-bf548/ports.h
@@ -59,38 +59,38 @@
 #define PORT_x_MUX_7_FUNC_2	(PORT_x_MUX_FUNC_2 << 14)
 #define PORT_x_MUX_7_FUNC_3	(PORT_x_MUX_FUNC_3 << 14)
 #define PORT_x_MUX_7_FUNC_4	(PORT_x_MUX_FUNC_4 << 14)
-#define PORT_x_MUX_8_FUNC_1	(PORT_x_MUX_FUNC_1 << 14)
-#define PORT_x_MUX_8_FUNC_2	(PORT_x_MUX_FUNC_2 << 14)
-#define PORT_x_MUX_8_FUNC_3	(PORT_x_MUX_FUNC_3 << 14)
-#define PORT_x_MUX_8_FUNC_4	(PORT_x_MUX_FUNC_4 << 14)
-#define PORT_x_MUX_9_FUNC_1	(PORT_x_MUX_FUNC_1 << 14)
-#define PORT_x_MUX_9_FUNC_2	(PORT_x_MUX_FUNC_2 << 14)
-#define PORT_x_MUX_9_FUNC_3	(PORT_x_MUX_FUNC_3 << 14)
-#define PORT_x_MUX_9_FUNC_4	(PORT_x_MUX_FUNC_4 << 14)
-#define PORT_x_MUX_10_FUNC_1	(PORT_x_MUX_FUNC_1 << 14)
-#define PORT_x_MUX_10_FUNC_2	(PORT_x_MUX_FUNC_2 << 14)
-#define PORT_x_MUX_10_FUNC_3	(PORT_x_MUX_FUNC_3 << 14)
-#define PORT_x_MUX_10_FUNC_4	(PORT_x_MUX_FUNC_4 << 14)
-#define PORT_x_MUX_11_FUNC_1	(PORT_x_MUX_FUNC_1 << 14)
-#define PORT_x_MUX_11_FUNC_2	(PORT_x_MUX_FUNC_2 << 14)
-#define PORT_x_MUX_11_FUNC_3	(PORT_x_MUX_FUNC_3 << 14)
-#define PORT_x_MUX_11_FUNC_4	(PORT_x_MUX_FUNC_4 << 14)
-#define PORT_x_MUX_12_FUNC_1	(PORT_x_MUX_FUNC_1 << 14)
-#define PORT_x_MUX_12_FUNC_2	(PORT_x_MUX_FUNC_2 << 14)
-#define PORT_x_MUX_12_FUNC_3	(PORT_x_MUX_FUNC_3 << 14)
-#define PORT_x_MUX_12_FUNC_4	(PORT_x_MUX_FUNC_4 << 14)
-#define PORT_x_MUX_13_FUNC_1	(PORT_x_MUX_FUNC_1 << 14)
-#define PORT_x_MUX_13_FUNC_2	(PORT_x_MUX_FUNC_2 << 14)
-#define PORT_x_MUX_13_FUNC_3	(PORT_x_MUX_FUNC_3 << 14)
-#define PORT_x_MUX_13_FUNC_4	(PORT_x_MUX_FUNC_4 << 14)
-#define PORT_x_MUX_14_FUNC_1	(PORT_x_MUX_FUNC_1 << 14)
-#define PORT_x_MUX_14_FUNC_2	(PORT_x_MUX_FUNC_2 << 14)
-#define PORT_x_MUX_14_FUNC_3	(PORT_x_MUX_FUNC_3 << 14)
-#define PORT_x_MUX_14_FUNC_4	(PORT_x_MUX_FUNC_4 << 14)
-#define PORT_x_MUX_15_FUNC_1	(PORT_x_MUX_FUNC_1 << 14)
-#define PORT_x_MUX_15_FUNC_2	(PORT_x_MUX_FUNC_2 << 14)
-#define PORT_x_MUX_15_FUNC_3	(PORT_x_MUX_FUNC_3 << 14)
-#define PORT_x_MUX_15_FUNC_4	(PORT_x_MUX_FUNC_4 << 14)
+#define PORT_x_MUX_8_FUNC_1	(PORT_x_MUX_FUNC_1 << 16)
+#define PORT_x_MUX_8_FUNC_2	(PORT_x_MUX_FUNC_2 << 16)
+#define PORT_x_MUX_8_FUNC_3	(PORT_x_MUX_FUNC_3 << 16)
+#define PORT_x_MUX_8_FUNC_4	(PORT_x_MUX_FUNC_4 << 16)
+#define PORT_x_MUX_9_FUNC_1	(PORT_x_MUX_FUNC_1 << 18)
+#define PORT_x_MUX_9_FUNC_2	(PORT_x_MUX_FUNC_2 << 18)
+#define PORT_x_MUX_9_FUNC_3	(PORT_x_MUX_FUNC_3 << 18)
+#define PORT_x_MUX_9_FUNC_4	(PORT_x_MUX_FUNC_4 << 18)
+#define PORT_x_MUX_10_FUNC_1	(PORT_x_MUX_FUNC_1 << 20)
+#define PORT_x_MUX_10_FUNC_2	(PORT_x_MUX_FUNC_2 << 20)
+#define PORT_x_MUX_10_FUNC_3	(PORT_x_MUX_FUNC_3 << 20)
+#define PORT_x_MUX_10_FUNC_4	(PORT_x_MUX_FUNC_4 << 20)
+#define PORT_x_MUX_11_FUNC_1	(PORT_x_MUX_FUNC_1 << 22)
+#define PORT_x_MUX_11_FUNC_2	(PORT_x_MUX_FUNC_2 << 22)
+#define PORT_x_MUX_11_FUNC_3	(PORT_x_MUX_FUNC_3 << 22)
+#define PORT_x_MUX_11_FUNC_4	(PORT_x_MUX_FUNC_4 << 22)
+#define PORT_x_MUX_12_FUNC_1	(PORT_x_MUX_FUNC_1 << 24)
+#define PORT_x_MUX_12_FUNC_2	(PORT_x_MUX_FUNC_2 << 24)
+#define PORT_x_MUX_12_FUNC_3	(PORT_x_MUX_FUNC_3 << 24)
+#define PORT_x_MUX_12_FUNC_4	(PORT_x_MUX_FUNC_4 << 24)
+#define PORT_x_MUX_13_FUNC_1	(PORT_x_MUX_FUNC_1 << 26)
+#define PORT_x_MUX_13_FUNC_2	(PORT_x_MUX_FUNC_2 << 26)
+#define PORT_x_MUX_13_FUNC_3	(PORT_x_MUX_FUNC_3 << 26)
+#define PORT_x_MUX_13_FUNC_4	(PORT_x_MUX_FUNC_4 << 26)
+#define PORT_x_MUX_14_FUNC_1	(PORT_x_MUX_FUNC_1 << 28)
+#define PORT_x_MUX_14_FUNC_2	(PORT_x_MUX_FUNC_2 << 28)
+#define PORT_x_MUX_14_FUNC_3	(PORT_x_MUX_FUNC_3 << 28)
+#define PORT_x_MUX_14_FUNC_4	(PORT_x_MUX_FUNC_4 << 28)
+#define PORT_x_MUX_15_FUNC_1	(PORT_x_MUX_FUNC_1 << 30)
+#define PORT_x_MUX_15_FUNC_2	(PORT_x_MUX_FUNC_2 << 30)
+#define PORT_x_MUX_15_FUNC_3	(PORT_x_MUX_FUNC_3 << 30)
+#define PORT_x_MUX_15_FUNC_4	(PORT_x_MUX_FUNC_4 << 30)
 
 /* Port A Masks */
 #define PA0			0x0001
diff --git a/include/asm-blackfin/mach-bf561/BF561_cdef.h b/include/asm-blackfin/mach-bf561/BF561_cdef.h
index 395cd28e9..d8883f317 100644
--- a/include/asm-blackfin/mach-bf561/BF561_cdef.h
+++ b/include/asm-blackfin/mach-bf561/BF561_cdef.h
@@ -241,9 +241,9 @@
 #define pITEST_DATA1                   ((uint32_t volatile *)ITEST_DATA1)
 #define bfin_read_ITEST_DATA1()        bfin_read32(ITEST_DATA1)
 #define bfin_write_ITEST_DATA1(val)    bfin_write32(ITEST_DATA1, val)
-#define pSICA_SWRST                    ((uint32_t volatile *)SICA_SWRST)
-#define bfin_read_SICA_SWRST()         bfin_read32(SICA_SWRST)
-#define bfin_write_SICA_SWRST(val)     bfin_write32(SICA_SWRST, val)
+#define pSICA_SWRST                    ((uint16_t volatile *)SICA_SWRST)
+#define bfin_read_SICA_SWRST()         bfin_read16(SICA_SWRST)
+#define bfin_write_SICA_SWRST(val)     bfin_write16(SICA_SWRST, val)
 #define pSICA_SYSCR                    ((uint32_t volatile *)SICA_SYSCR)
 #define bfin_read_SICA_SYSCR()         bfin_read32(SICA_SYSCR)
 #define bfin_write_SICA_SYSCR(val)     bfin_write32(SICA_SYSCR, val)
@@ -292,9 +292,9 @@
 #define pSICA_IAR7                     ((uint32_t volatile *)SICA_IAR7)
 #define bfin_read_SICA_IAR7()          bfin_read32(SICA_IAR7)
 #define bfin_write_SICA_IAR7(val)      bfin_write32(SICA_IAR7, val)
-#define pSICB_SWRST                    ((uint32_t volatile *)SICB_SWRST)
-#define bfin_read_SICB_SWRST()         bfin_read32(SICB_SWRST)
-#define bfin_write_SICB_SWRST(val)     bfin_write32(SICB_SWRST, val)
+#define pSICB_SWRST                    ((uint16_t volatile *)SICB_SWRST)
+#define bfin_read_SICB_SWRST()         bfin_read16(SICB_SWRST)
+#define bfin_write_SICB_SWRST(val)     bfin_write16(SICB_SWRST, val)
 #define pSICB_SYSCR                    ((uint32_t volatile *)SICB_SYSCR)
 #define bfin_read_SICB_SYSCR()         bfin_read32(SICB_SYSCR)
 #define bfin_write_SICB_SYSCR(val)     bfin_write32(SICB_SYSCR, val)
@@ -400,12 +400,6 @@
 #define pEVT_OVERRIDE                  ((uint32_t volatile *)EVT_OVERRIDE)
 #define bfin_read_EVT_OVERRIDE()       bfin_read32(EVT_OVERRIDE)
 #define bfin_write_EVT_OVERRIDE(val)   bfin_write32(EVT_OVERRIDE, val)
-#define pDSPID                         ((uint32_t volatile *)DSPID)
-#define bfin_read_DSPID()              bfin_read32(DSPID)
-#define bfin_write_DSPID(val)          bfin_write32(DSPID, val)
-#define pDBGSTAT                       ((uint32_t volatile *)DBGSTAT)
-#define bfin_read_DBGSTAT()            bfin_read32(DBGSTAT)
-#define bfin_write_DBGSTAT(val)        bfin_write32(DBGSTAT, val)
 #define pUART_THR                      ((uint16_t volatile *)UART_THR)
 #define bfin_read_UART_THR()           bfin_read16(UART_THR)
 #define bfin_write_UART_THR(val)       bfin_write16(UART_THR, val)
diff --git a/include/asm-blackfin/mach-bf561/BF561_def.h b/include/asm-blackfin/mach-bf561/BF561_def.h
index 22b5bac3e..853496232 100644
--- a/include/asm-blackfin/mach-bf561/BF561_def.h
+++ b/include/asm-blackfin/mach-bf561/BF561_def.h
@@ -140,8 +140,6 @@
 #define SRAM_BASE_ADDR_CORE_A          0xFFE00000
 #define SRAM_BASE_ADDR_CORE_B          0xFFE00000
 #define EVT_OVERRIDE                   0xFFE02100
-#define DSPID                          0xFFE05000
-#define DBGSTAT                        0xFFE05008
 #define UART_THR                       0xFFC00400
 #define UART_RBR                       0xFFC00400
 #define UART_DLL                       0xFFC00400
diff --git a/include/asm-blackfin/mach-bf561/anomaly.h b/include/asm-blackfin/mach-bf561/anomaly.h
index 0c1d46193..e9c4ca878 100644
--- a/include/asm-blackfin/mach-bf561/anomaly.h
+++ b/include/asm-blackfin/mach-bf561/anomaly.h
@@ -2,12 +2,12 @@
  * File: include/asm-blackfin/mach-bf561/anomaly.h
  * Bugs: Enter bugs at http://blackfin.uclinux.org/
  *
- * Copyright (C) 2004-2007 Analog Devices Inc.
+ * Copyright (C) 2004-2008 Analog Devices Inc.
  * Licensed under the GPL-2 or later.
  */
 
 /* This file shoule be up to date with:
- *  - Revision O, 11/15/2007; ADSP-BF561 Blackfin Processor Anomaly List
+ *  - Revision P, 02/08/2008; ADSP-BF561 Blackfin Processor Anomaly List
  */
 
 #ifndef _MACH_ANOMALY_H_
@@ -256,15 +256,20 @@
 #define ANOMALY_05000357 (1)
 /* Conflicting Column Address Widths Causes SDRAM Errors */
 #define ANOMALY_05000362 (1)
+/* UART Break Signal Issues */
+#define ANOMALY_05000363 (__SILICON_REVISION__ < 5)
 /* PPI Underflow Error Goes Undetected in ITU-R 656 Mode */
 #define ANOMALY_05000366 (1)
 /* Possible RETS Register Corruption when Subroutine Is under 5 Cycles in Duration */
 #define ANOMALY_05000371 (1)
+/* Level-Sensitive External GPIO Wakeups May Cause Indefinite Stall */
+#define ANOMALY_05000403 (1)
 
 /* Anomalies that don't exist on this proc */
 #define ANOMALY_05000158 (0)
 #define ANOMALY_05000183 (0)
 #define ANOMALY_05000273 (0)
 #define ANOMALY_05000311 (0)
+#define ANOMALY_05000353 (1)
 
 #endif
diff --git a/include/asm-blackfin/mach-common/ADSP-EDN-core_cdef.h b/include/asm-blackfin/mach-common/ADSP-EDN-core_cdef.h
index 4ac71f632..af17813db 100644
--- a/include/asm-blackfin/mach-common/ADSP-EDN-core_cdef.h
+++ b/include/asm-blackfin/mach-common/ADSP-EDN-core_cdef.h
@@ -63,5 +63,11 @@
 #define pWPSTAT                        ((uint32_t volatile *)WPSTAT)
 #define bfin_read_WPSTAT()             bfin_read32(WPSTAT)
 #define bfin_write_WPSTAT(val)         bfin_write32(WPSTAT, val)
+#define pDSPID                         ((uint32_t volatile *)DSPID)
+#define bfin_read_DSPID()              bfin_read32(DSPID)
+#define bfin_write_DSPID(val)          bfin_write32(DSPID, val)
+#define pDBGSTAT                       ((uint32_t volatile *)DBGSTAT)
+#define bfin_read_DBGSTAT()            bfin_read32(DBGSTAT)
+#define bfin_write_DBGSTAT(val)        bfin_write32(DBGSTAT, val)
 
 #endif /* __BFIN_CDEF_ADSP_EDN_core__ */
diff --git a/include/asm-blackfin/mach-common/ADSP-EDN-core_def.h b/include/asm-blackfin/mach-common/ADSP-EDN-core_def.h
index 721af1256..74f5d309c 100644
--- a/include/asm-blackfin/mach-common/ADSP-EDN-core_def.h
+++ b/include/asm-blackfin/mach-common/ADSP-EDN-core_def.h
@@ -25,5 +25,7 @@
 #define WPDACNT0                       0xFFE07180
 #define WPDACNT1                       0xFFE07184
 #define WPSTAT                         0xFFE07200
+#define DSPID                          0xFFE05000
+#define DBGSTAT                        0xFFE05008
 
 #endif /* __BFIN_DEF_ADSP_EDN_core__ */
diff --git a/include/asm-blackfin/mach-common/ADSP-EDN-extended_cdef.h b/include/asm-blackfin/mach-common/ADSP-EDN-extended_cdef.h
index 2f5a2658f..4c439e528 100644
--- a/include/asm-blackfin/mach-common/ADSP-EDN-extended_cdef.h
+++ b/include/asm-blackfin/mach-common/ADSP-EDN-extended_cdef.h
@@ -897,18 +897,15 @@
 #define pPLL_LOCKCNT                   ((uint16_t volatile *)PLL_LOCKCNT) /* PLL Lock Count register (16-bit) */
 #define bfin_read_PLL_LOCKCNT()        bfin_read16(PLL_LOCKCNT)
 #define bfin_write_PLL_LOCKCNT(val)    bfin_write16(PLL_LOCKCNT, val)
-#define pSWRST                         ((uint32_t volatile *)SWRST) /* Software Reset Register (16-bit) */
-#define bfin_read_SWRST()              bfin_read32(SWRST)
-#define bfin_write_SWRST(val)          bfin_write32(SWRST, val)
+#define pSWRST                         ((uint16_t volatile *)SWRST) /* Software Reset Register (16-bit) */
+#define bfin_read_SWRST()              bfin_read16(SWRST)
+#define bfin_write_SWRST(val)          bfin_write16(SWRST, val)
 #define pSYSCR                         ((uint32_t volatile *)SYSCR) /* System Configuration register */
 #define bfin_read_SYSCR()              bfin_read32(SYSCR)
 #define bfin_write_SYSCR(val)          bfin_write32(SYSCR, val)
 #define pEVT_OVERRIDE                  ((uint32_t volatile *)EVT_OVERRIDE)
 #define bfin_read_EVT_OVERRIDE()       bfin_read32(EVT_OVERRIDE)
 #define bfin_write_EVT_OVERRIDE(val)   bfin_write32(EVT_OVERRIDE, val)
-#define pDSPID                         ((uint32_t volatile *)DSPID)
-#define bfin_read_DSPID()              bfin_read32(DSPID)
-#define bfin_write_DSPID(val)          bfin_write32(DSPID, val)
 #define pCHIPID                        ((uint32_t volatile *)CHIPID)
 #define bfin_read_CHIPID()             bfin_read32(CHIPID)
 #define bfin_write_CHIPID(val)         bfin_write32(CHIPID, val)
diff --git a/include/asm-blackfin/mach-common/ADSP-EDN-extended_def.h b/include/asm-blackfin/mach-common/ADSP-EDN-extended_def.h
index 91902709f..24b56b387 100644
--- a/include/asm-blackfin/mach-common/ADSP-EDN-extended_def.h
+++ b/include/asm-blackfin/mach-common/ADSP-EDN-extended_def.h
@@ -306,7 +306,6 @@
 #define SWRST                          0xFFC00100 /* Software Reset Register (16-bit) */
 #define SYSCR                          0xFFC00104 /* System Configuration register */
 #define EVT_OVERRIDE                   0xFFE02100
-#define DSPID                          0xFFE05000
 #define CHIPID                         0xFFC00014
 #define TBUFCTL                        0xFFE06000 /* Trace Buffer Control Register */
 #define TBUFSTAT                       0xFFE06004 /* Trace Buffer Status Register */
diff --git a/include/asm-blackfin/mem_init.h b/include/asm-blackfin/mem_init.h
deleted file mode 100644
index cb448ad61..000000000
--- a/include/asm-blackfin/mem_init.h
+++ /dev/null
@@ -1,321 +0,0 @@
-/*
- * U-boot - mem_init.h Header file for memory initialization
- *
- * Copyright (c) 2005-2007 Analog Devices Inc.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- * MA 02110-1301 USA
- */
-
-#if (CONFIG_MEM_MT48LC16M16A2TG_75 || \
-	CONFIG_MEM_MT48LC64M4A2FB_7E || \
-	CONFIG_MEM_MT48LC16M8A2TG_75 || \
-	CONFIG_MEM_MT48LC8M16A2TG_7E || \
-	CONFIG_MEM_MT48LC8M32B2B5_7  || \
-	CONFIG_MEM_MT48LC32M8A2_75)
-
-	#if ( CONFIG_SCLK_HZ > 119402985 )
-		#define SDRAM_tRP	TRP_2
-		#define SDRAM_tRP_num	2
-		#define SDRAM_tRAS	TRAS_7
-		#define SDRAM_tRAS_num	7
-		#define SDRAM_tRCD	TRCD_2
-		#define SDRAM_tWR	TWR_2
-	#endif
-	#if ( CONFIG_SCLK_HZ > 104477612 ) && ( CONFIG_SCLK_HZ <= 119402985 )
-		#define SDRAM_tRP	TRP_2
-		#define SDRAM_tRP_num	2
-		#define SDRAM_tRAS	TRAS_6
-		#define SDRAM_tRAS_num	6
-		#define SDRAM_tRCD	TRCD_2
-		#define SDRAM_tWR	TWR_2
-	#endif
-	#if ( CONFIG_SCLK_HZ >  89552239 ) && ( CONFIG_SCLK_HZ <= 104477612 )
-		#define SDRAM_tRP	TRP_2
-		#define SDRAM_tRP_num	2
-		#define SDRAM_tRAS	TRAS_5
-		#define SDRAM_tRAS_num	5
-		#define SDRAM_tRCD	TRCD_2
-		#define SDRAM_tWR	TWR_2
-	#endif
-	#if ( CONFIG_SCLK_HZ >  74626866 ) && ( CONFIG_SCLK_HZ <=  89552239 )
-		#define SDRAM_tRP	TRP_2
-		#define SDRAM_tRP_num	2
-		#define SDRAM_tRAS	TRAS_4
-		#define SDRAM_tRAS_num	4
-		#define SDRAM_tRCD	TRCD_2
-		#define SDRAM_tWR	TWR_2
-	#endif
-	#if ( CONFIG_SCLK_HZ >  66666667 ) && ( CONFIG_SCLK_HZ <= 74626866 )
-		#define SDRAM_tRP	TRP_2
-		#define SDRAM_tRP_num	2
-		#define SDRAM_tRAS	TRAS_3
-		#define SDRAM_tRAS_num	3
-		#define SDRAM_tRCD	TRCD_2
-		#define SDRAM_tWR	TWR_2
-	#endif
-	#if ( CONFIG_SCLK_HZ >  59701493 ) && ( CONFIG_SCLK_HZ <= 66666667 )
-		#define SDRAM_tRP	TRP_1
-		#define SDRAM_tRP_num	1
-		#define SDRAM_tRAS	TRAS_3
-		#define SDRAM_tRAS_num	3
-		#define SDRAM_tRCD	TRCD_1
-		#define SDRAM_tWR	TWR_2
-	#endif
-	#if ( CONFIG_SCLK_HZ >  44776119 ) && ( CONFIG_SCLK_HZ <=  59701493 )
-		#define SDRAM_tRP	TRP_1
-		#define SDRAM_tRP_num	1
-		#define SDRAM_tRAS	TRAS_3
-		#define SDRAM_tRAS_num	3
-		#define SDRAM_tRCD	TRCD_1
-		#define SDRAM_tWR	TWR_2
-	#endif
-	#if ( CONFIG_SCLK_HZ >  29850746 ) && ( CONFIG_SCLK_HZ <=  44776119 )
-		#define SDRAM_tRP	TRP_1
-		#define SDRAM_tRP_num	1
-		#define SDRAM_tRAS	TRAS_2
-		#define SDRAM_tRAS_num	2
-		#define SDRAM_tRCD	TRCD_1
-		#define SDRAM_tWR	TWR_2
-	#endif
-	#if ( CONFIG_SCLK_HZ <=  29850746 )
-		#define SDRAM_tRP	TRP_1
-		#define SDRAM_tRP_num	1
-		#define SDRAM_tRAS	TRAS_1
-		#define SDRAM_tRAS_num	1
-		#define SDRAM_tRCD	TRCD_1
-		#define SDRAM_tWR	TWR_2
-	#endif
-#endif
-
-#if (CONFIG_MEM_MT48LC16M16A2TG_75)
-	/*SDRAM INFORMATION: */
-	#define SDRAM_Tref	64	/* Refresh period in milliseconds   */
-	#define SDRAM_NRA	8192	/* Number of row addresses in SDRAM */
-	#define SDRAM_CL	CL_3
-#endif
-
-#if (CONFIG_MEM_MT48LC64M4A2FB_7E)
-	/*SDRAM INFORMATION: */
-	#define SDRAM_Tref	64	/* Refresh period in milliseconds   */
-	#define SDRAM_NRA	8192	/* Number of row addresses in SDRAM */
-	#define SDRAM_CL	CL_2
-#endif
-
-#if (CONFIG_MEM_MT48LC16M8A2TG_75)
-	/*SDRAM INFORMATION: */
-	#define SDRAM_Tref      64	/* Refresh period in milliseconds   */
-	#define SDRAM_NRA       4096	/* Number of row addresses in SDRAM */
-	#define SDRAM_CL        CL_3
-#endif
-
-#if (CONFIG_MEM_MT48LC32M8A2_75)
-/*SDRAM INFORMATION: */
-#define SDRAM_Tref  64			/* Refresh period in milliseconds   */
-#define SDRAM_NRA   8192		/* Number of row addresses in SDRAM */
-#define SDRAM_CL    CL_3
-#endif
-
-#if (CONFIG_MEM_MT48LC8M16A2TG_7E)
-	/*SDRAM INFORMATION: */
-	#define SDRAM_Tref	64	/* Refresh period in milliseconds   */
-	#define SDRAM_NRA	4096	/* Number of row addresses in SDRAM */
-	#define SDRAM_CL	CL_2
-#endif
-
-#if (CONFIG_MEM_MT48LC8M32B2B5_7)
-	/*SDRAM INFORMATION: */
-	#define SDRAM_Tref	64	/* Refresh period in milliseconds   */
-	#define SDRAM_NRA	4096	/* Number of row addresses in SDRAM */
-	#define SDRAM_CL	CL_3
-#endif
-
-#if ( CONFIG_MEM_SIZE == 128 )
-	#define SDRAM_SIZE	EBSZ_128
-#endif
-#if ( CONFIG_MEM_SIZE == 64 )
-	#define SDRAM_SIZE	EBSZ_64
-#endif
-#if (  CONFIG_MEM_SIZE == 32 )
-	#define SDRAM_SIZE	EBSZ_32
-#endif
-#if ( CONFIG_MEM_SIZE == 16 )
-	#define SDRAM_SIZE	EBSZ_16
-#endif
-#if ( CONFIG_MEM_ADD_WDTH == 11 )
-	#define SDRAM_WIDTH	EBCAW_11
-#endif
-#if ( CONFIG_MEM_ADD_WDTH == 10 )
-	#define SDRAM_WIDTH	EBCAW_10
-#endif
-#if ( CONFIG_MEM_ADD_WDTH == 9 )
-	#define SDRAM_WIDTH	EBCAW_9
-#endif
-#if ( CONFIG_MEM_ADD_WDTH == 8 )
-	#define SDRAM_WIDTH	EBCAW_8
-#endif
-
-#define mem_SDBCTL	SDRAM_WIDTH | SDRAM_SIZE | EBE
-
-/* Equation from section 17 (p17-46) of BF533 HRM */
-#define mem_SDRRC	((( CONFIG_SCLK_HZ / 1000) * SDRAM_Tref)  / SDRAM_NRA) - (SDRAM_tRAS_num + SDRAM_tRP_num)
-
-/* Enable SCLK Out */
-#define mem_SDGCTL	( SCTLE | SDRAM_CL | SDRAM_tRAS | SDRAM_tRP | SDRAM_tRCD | SDRAM_tWR | PSS )
-
-#define flash_EBIU_AMBCTL_WAT	( ( CONFIG_FLASH_SPEED_BWAT * 4 )  / ( 4000000000 / CONFIG_SCLK_HZ ) ) + 1
-#define flash_EBIU_AMBCTL_RAT	( ( CONFIG_FLASH_SPEED_BRAT * 4 )  / ( 4000000000 / CONFIG_SCLK_HZ ) ) + 1
-#define flash_EBIU_AMBCTL_HT	( ( CONFIG_FLASH_SPEED_BHT  * 4 )  / ( 4000000000 / CONFIG_SCLK_HZ ) )
-#define flash_EBIU_AMBCTL_ST	( ( CONFIG_FLASH_SPEED_BST  * 4 )  / ( 4000000000 / CONFIG_SCLK_HZ ) ) + 1
-#define flash_EBIU_AMBCTL_TT	( ( CONFIG_FLASH_SPEED_BTT  * 4 )  / ( 4000000000 / CONFIG_SCLK_HZ ) ) + 1
-
-#if (flash_EBIU_AMBCTL_TT > 3 )
-	#define flash_EBIU_AMBCTL0_TT	B0TT_4
-#endif
-#if (flash_EBIU_AMBCTL_TT == 3 )
-	#define flash_EBIU_AMBCTL0_TT	B0TT_3
-#endif
-#if (flash_EBIU_AMBCTL_TT == 2 )
-	#define flash_EBIU_AMBCTL0_TT	B0TT_2
-#endif
-#if (flash_EBIU_AMBCTL_TT < 2 )
-	#define flash_EBIU_AMBCTL0_TT	B0TT_1
-#endif
-
-#if (flash_EBIU_AMBCTL_ST > 3 )
-	#define flash_EBIU_AMBCTL0_ST	B0ST_4
-#endif
-#if (flash_EBIU_AMBCTL_ST == 3 )
-	#define flash_EBIU_AMBCTL0_ST	B0ST_3
-#endif
-#if (flash_EBIU_AMBCTL_ST == 2 )
-	#define flash_EBIU_AMBCTL0_ST	B0ST_2
-#endif
-#if (flash_EBIU_AMBCTL_ST < 2 )
-	#define flash_EBIU_AMBCTL0_ST	B0ST_1
-#endif
-
-#if (flash_EBIU_AMBCTL_HT > 2 )
-	#define flash_EBIU_AMBCTL0_HT	B0HT_3
-#endif
-#if (flash_EBIU_AMBCTL_HT == 2 )
-	#define flash_EBIU_AMBCTL0_HT	B0HT_2
-#endif
-#if (flash_EBIU_AMBCTL_HT == 1 )
-	#define flash_EBIU_AMBCTL0_HT	B0HT_1
-#endif
-#if (flash_EBIU_AMBCTL_HT == 0  && CONFIG_FLASH_SPEED_BHT == 0)
-	#define flash_EBIU_AMBCTL0_HT	B0HT_0
-#endif
-#if (flash_EBIU_AMBCTL_HT == 0  && CONFIG_FLASH_SPEED_BHT != 0)
-	#define flash_EBIU_AMBCTL0_HT	B0HT_1
-#endif
-
-#if (flash_EBIU_AMBCTL_WAT > 14)
-	#define flash_EBIU_AMBCTL0_WAT	B0WAT_15
-#endif
-#if (flash_EBIU_AMBCTL_WAT == 14)
-	#define flash_EBIU_AMBCTL0_WAT	B0WAT_14
-#endif
-#if (flash_EBIU_AMBCTL_WAT == 13)
-	#define flash_EBIU_AMBCTL0_WAT	B0WAT_13
-#endif
-#if (flash_EBIU_AMBCTL_WAT == 12)
-	#define flash_EBIU_AMBCTL0_WAT	B0WAT_12
-#endif
-#if (flash_EBIU_AMBCTL_WAT == 11)
-	#define flash_EBIU_AMBCTL0_WAT	B0WAT_11
-#endif
-#if (flash_EBIU_AMBCTL_WAT == 10)
-	#define flash_EBIU_AMBCTL0_WAT	B0WAT_10
-#endif
-#if (flash_EBIU_AMBCTL_WAT == 9)
-	#define flash_EBIU_AMBCTL0_WAT	B0WAT_9
-#endif
-#if (flash_EBIU_AMBCTL_WAT == 8)
-	#define flash_EBIU_AMBCTL0_WAT	B0WAT_8
-#endif
-#if (flash_EBIU_AMBCTL_WAT == 7)
-	#define flash_EBIU_AMBCTL0_WAT	B0WAT_7
-#endif
-#if (flash_EBIU_AMBCTL_WAT == 6)
-	#define flash_EBIU_AMBCTL0_WAT	B0WAT_6
-#endif
-#if (flash_EBIU_AMBCTL_WAT == 5)
-	#define flash_EBIU_AMBCTL0_WAT	B0WAT_5
-#endif
-#if (flash_EBIU_AMBCTL_WAT == 4)
-	#define flash_EBIU_AMBCTL0_WAT	B0WAT_4
-#endif
-#if (flash_EBIU_AMBCTL_WAT == 3)
-	#define flash_EBIU_AMBCTL0_WAT	B0WAT_3
-#endif
-#if (flash_EBIU_AMBCTL_WAT == 2)
-	#define flash_EBIU_AMBCTL0_WAT	B0WAT_2
-#endif
-#if (flash_EBIU_AMBCTL_WAT == 1)
-	#define flash_EBIU_AMBCTL0_WAT	B0WAT_1
-#endif
-
-#if (flash_EBIU_AMBCTL_RAT > 14)
-	#define flash_EBIU_AMBCTL0_RAT	B0RAT_15
-#endif
-#if (flash_EBIU_AMBCTL_RAT == 14)
-	#define flash_EBIU_AMBCTL0_RAT	B0RAT_14
-#endif
-#if (flash_EBIU_AMBCTL_RAT == 13)
-	#define flash_EBIU_AMBCTL0_RAT	B0RAT_13
-#endif
-#if (flash_EBIU_AMBCTL_RAT == 12)
-	#define flash_EBIU_AMBCTL0_RAT	B0RAT_12
-#endif
-#if (flash_EBIU_AMBCTL_RAT == 11)
-	#define flash_EBIU_AMBCTL0_RAT	B0RAT_11
-#endif
-#if (flash_EBIU_AMBCTL_RAT == 10)
-	#define flash_EBIU_AMBCTL0_RAT	B0RAT_10
-#endif
-#if (flash_EBIU_AMBCTL_RAT == 9)
-	#define flash_EBIU_AMBCTL0_RAT	B0RAT_9
-#endif
-#if (flash_EBIU_AMBCTL_RAT == 8)
-	#define flash_EBIU_AMBCTL0_RAT	B0RAT_8
-#endif
-#if (flash_EBIU_AMBCTL_RAT == 7)
-	#define flash_EBIU_AMBCTL0_RAT	B0RAT_7
-#endif
-#if (flash_EBIU_AMBCTL_RAT == 6)
-	#define flash_EBIU_AMBCTL0_RAT	B0RAT_6
-#endif
-#if (flash_EBIU_AMBCTL_RAT == 5)
-	#define flash_EBIU_AMBCTL0_RAT	B0RAT_5
-#endif
-#if (flash_EBIU_AMBCTL_RAT == 4)
-	#define flash_EBIU_AMBCTL0_RAT	B0RAT_4
-#endif
-#if (flash_EBIU_AMBCTL_RAT == 3)
-	#define flash_EBIU_AMBCTL0_RAT	B0RAT_3
-#endif
-#if (flash_EBIU_AMBCTL_RAT == 2)
-	#define flash_EBIU_AMBCTL0_RAT	B0RAT_2
-#endif
-#if (flash_EBIU_AMBCTL_RAT == 1)
-	#define flash_EBIU_AMBCTL0_RAT	B0RAT_1
-#endif
-
-#define flash_EBIU_AMBCTL0	flash_EBIU_AMBCTL0_WAT | flash_EBIU_AMBCTL0_RAT | flash_EBIU_AMBCTL0_HT | flash_EBIU_AMBCTL0_ST | flash_EBIU_AMBCTL0_TT | CONFIG_FLASH_SPEED_RDYEN
diff --git a/include/asm-i386/byteorder.h b/include/asm-i386/byteorder.h
index a9c69d5b1..7dfeb8bbe 100644
--- a/include/asm-i386/byteorder.h
+++ b/include/asm-i386/byteorder.h
@@ -6,7 +6,7 @@
 #ifdef __GNUC__
 
 
-static __inline__ __const__ __u32 ___arch__swab32(__u32 x)
+static __inline__ __u32 ___arch__swab32(__u32 x)
 {
 #ifdef CONFIG_X86_BSWAP
 	__asm__("bswap %0" : "=r" (x) : "0" (x));
@@ -20,7 +20,7 @@ static __inline__ __const__ __u32 ___arch__swab32(__u32 x)
 	return x;
 }
 
-static __inline__ __const__ __u16 ___arch__swab16(__u16 x)
+static __inline__ __u16 ___arch__swab16(__u16 x)
 {
 	__asm__("xchgb %b0,%h0"		/* swap bytes		*/ \
 		: "=q" (x) \
diff --git a/include/asm-i386/global_data.h b/include/asm-i386/global_data.h
index 5dfb59510..3abbf1dba 100644
--- a/include/asm-i386/global_data.h
+++ b/include/asm-i386/global_data.h
@@ -30,7 +30,7 @@
  * global variables during system initialization (until we have set
  * up the memory controller so that we can use RAM).
  *
- * Keep it *SMALL* and remember to set CFG_GBL_DATA_SIZE > sizeof(gd_t)
+ * Keep it *SMALL* and remember to set CONFIG_SYS_GBL_DATA_SIZE > sizeof(gd_t)
  */
 
 typedef	struct {
@@ -57,9 +57,10 @@ typedef	struct {
 #define	GD_FLG_POSTFAIL	0x00008		/* Critical POST test failed		*/
 #define	GD_FLG_POSTSTOP	0x00010		/* POST seqeunce aborted		*/
 #define	GD_FLG_LOGINIT	0x00020		/* Log Buffer has been initialized	*/
+#define GD_FLG_DISABLE_CONSOLE	0x00040		/* Disable console (in & out)	 */
 
-extern gd_t *global_data;
+extern gd_t *gd;
 
-#define DECLARE_GLOBAL_DATA_PTR     gd_t *gd = global_data
+#define DECLARE_GLOBAL_DATA_PTR
 
 #endif /* __ASM_GBL_DATA_H */
diff --git a/include/asm-i386/ic/pci.h b/include/asm-i386/ic/pci.h
new file mode 100644
index 000000000..bcccdbef8
--- /dev/null
+++ b/include/asm-i386/ic/pci.h
@@ -0,0 +1,49 @@
+/*
+ * (C) Copyright 2002
+ * Daniel Engström, Omicron Ceti AB <daniel@omicron.se>.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef _ASM_IC_SC520_PCI_H_
+#define _ASM_IC_SC520_PCI_H_ 1
+
+/* pin number used for PCI interrupt mappings */
+#define SC520_PCI_INTA 0
+#define SC520_PCI_INTB 1
+#define SC520_PCI_INTC 2
+#define SC520_PCI_INTD 3
+#define SC520_PCI_GPIRQ0 4
+#define SC520_PCI_GPIRQ1 5
+#define SC520_PCI_GPIRQ2 6
+#define SC520_PCI_GPIRQ3 7
+#define SC520_PCI_GPIRQ4 8
+#define SC520_PCI_GPIRQ5 9
+#define SC520_PCI_GPIRQ6 10
+#define SC520_PCI_GPIRQ7 11
+#define SC520_PCI_GPIRQ8 12
+#define SC520_PCI_GPIRQ9 13
+#define SC520_PCI_GPIRQ10 14
+
+extern int sc520_pci_ints[];
+
+void pci_sc520_init(struct pci_controller *hose);
+int pci_sc520_set_irq(int pci_pin, int irq);
+
+#endif
diff --git a/include/asm-i386/ic/sc520.h b/include/asm-i386/ic/sc520.h
index 0f7e7a551..bf3951665 100644
--- a/include/asm-i386/ic/sc520.h
+++ b/include/asm-i386/ic/sc520.h
@@ -282,24 +282,6 @@
 #define SC520_IRQ14 9
 #define SC520_IRQ15 10
 
-
-/* pin number used for PCI interrupt mappings */
-#define SC520_PCI_INTA 0
-#define SC520_PCI_INTB 1
-#define SC520_PCI_INTC 2
-#define SC520_PCI_INTD 3
-#define SC520_PCI_GPIRQ0 4
-#define SC520_PCI_GPIRQ1 5
-#define SC520_PCI_GPIRQ2 6
-#define SC520_PCI_GPIRQ3 7
-#define SC520_PCI_GPIRQ4 8
-#define SC520_PCI_GPIRQ5 9
-#define SC520_PCI_GPIRQ6 10
-#define SC520_PCI_GPIRQ7 11
-#define SC520_PCI_GPIRQ8 12
-#define SC520_PCI_GPIRQ9 13
-#define SC520_PCI_GPIRQ10 14
-
 /* utility functions */
 void write_mmcr_byte(u16 mmcr, u8 data);
 void write_mmcr_word(u16 mmcr, u16 data);
@@ -308,11 +290,7 @@ u8 read_mmcr_byte(u16 mmcr);
 u16 read_mmcr_word(u16 mmcr);
 u32 read_mmcr_long(u16 mmcr);
 
-extern int sc520_pci_ints[];
-
 void init_sc520(void);
 unsigned long init_sc520_dram(void);
-void pci_sc520_init(struct pci_controller *hose);
-int pci_sc520_set_irq(int pci_pin, int irq);
 
 #endif
diff --git a/board/xilinx/xupv2p/u-boot.lds b/include/asm-i386/ic/ssi.h
index cb90854a3..bd48eab16 100644
--- a/board/xilinx/xupv2p/u-boot.lds
+++ b/include/asm-i386/ic/ssi.h
@@ -1,7 +1,6 @@
 /*
- * (C) Copyright 2004 Atmark Techno, Inc.
- *
- * Yasushi SHOJI <yashi@atmark-techno.com>
+ * (C) Copyright 2008
+ * Graeme Russ <graeme.russ@gmail.com>.
  *
  * See file CREDITS for list of people who contributed to this
  * project.
@@ -22,46 +21,14 @@
  * MA 02111-1307 USA
  */
 
-OUTPUT_ARCH(microblaze)
-ENTRY(_start)
-
-SECTIONS
-{
-	.text ALIGN(0x4):
-	{
-		__text_start = .;
-		cpu/microblaze/start.o (.text)
-		*(.text)
-		__text_end = .;
-	}
-
-	.rodata ALIGN(0x4):
-	{
-		__rodata_start = .;
-		*(.rodata)
-		__rodata_end = .;
-	}
+#ifndef _ASM_IC_SSI_H_
+#define _ASM_IC_SSI_H_ 1
 
-	.data ALIGN(0x4):
-	{
-		__data_start = .;
-		*(.data)
-		__data_end = .;
-	}
+int ssi_set_interface(int, int, int, int);
+void ssi_chip_select(int);
+u8 ssi_txrx_byte(u8);
+void ssi_tx_byte(u8);
+u8 ssi_rx_byte(void);
 
-	.u_boot_cmd ALIGN(0x4):
-	{
-		. = .;
-		__u_boot_cmd_start = .;
-		*(.u_boot_cmd)
-		__u_boot_cmd_end = .;
-	}
 
-	.bss ALIGN(0x4):
-	{
-		__bss_start = .;
-		*(.bss)
-		__bss_end = .;
-	}
-	__end = . ;
-}
+#endif
diff --git a/include/asm-i386/io.h b/include/asm-i386/io.h
index 2c57140fb..9b757d489 100644
--- a/include/asm-i386/io.h
+++ b/include/asm-i386/io.h
@@ -229,4 +229,9 @@ static inline void unmap_physmem(void *vaddr, unsigned long flags)
 
 }
 
+static inline phys_addr_t virt_to_phys(void * vaddr)
+{
+	return (phys_addr_t)(vaddr);
+}
+
 #endif
diff --git a/include/asm-i386/pci.h b/include/asm-i386/pci.h
index bde95509a..050a2bb86 100644
--- a/include/asm-i386/pci.h
+++ b/include/asm-i386/pci.h
@@ -31,5 +31,4 @@ int pci_enable_legacy_video_ports(struct pci_controller* hose);
 int pci_shadow_rom(pci_dev_t dev, unsigned char *dest);
 void pci_remove_rom_window(struct pci_controller* hose, u32 addr);
 u32 pci_get_rom_window(struct pci_controller* hose, int size);
-
 #endif
diff --git a/include/asm-i386/string.h b/include/asm-i386/string.h
index 91a23f951..3643a79fd 100644
--- a/include/asm-i386/string.h
+++ b/include/asm-i386/string.h
@@ -5,6 +5,8 @@
  * We don't do inline string functions, since the
  * optimised inline asm versions are not small.
  */
+#undef __HAVE_ARCH_STRNCPY
+extern char *strncpy(char *__dest, __const__ char *__src, __kernel_size_t __n);
 
 #undef __HAVE_ARCH_STRRCHR
 extern char * strrchr(const char * s, int c);
diff --git a/include/asm-m68k/coldfire/ata.h b/include/asm-m68k/coldfire/ata.h
new file mode 100644
index 000000000..3efd03a62
--- /dev/null
+++ b/include/asm-m68k/coldfire/ata.h
@@ -0,0 +1,79 @@
+/*
+ * ATA Internal Memory Map
+ *
+ * Copyright (C) 2004-2008 Freescale Semiconductor, Inc.
+ * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __ATA_H__
+#define __ATA_H__
+
+/* ATA */
+typedef struct atac {
+	/* PIO */
+	u8 toff;		/* 0x00 */
+	u8 ton;			/* 0x01 */
+	u8 t1;			/* 0x02 */
+	u8 t2w;			/* 0x03 */
+	u8 t2r;			/* 0x04 */
+	u8 ta;			/* 0x05 */
+	u8 trd;			/* 0x06 */
+	u8 t4;			/* 0x07 */
+	u8 t9;			/* 0x08 */
+
+	/* DMA */
+	u8 tm;			/* 0x09 */
+	u8 tn;			/* 0x0A */
+	u8 td;			/* 0x0B */
+	u8 tk;			/* 0x0C */
+	u8 tack;		/* 0x0D */
+	u8 tenv;		/* 0x0E */
+	u8 trp;			/* 0x0F */
+	u8 tzah;		/* 0x10 */
+	u8 tmli;		/* 0x11 */
+	u8 tdvh;		/* 0x12 */
+	u8 tdzfs;		/* 0x13 */
+	u8 tdvs;		/* 0x14 */
+	u8 tcvh;		/* 0x15 */
+	u8 tss;			/* 0x16 */
+	u8 tcyc;		/* 0x17 */
+
+	/* FIFO */
+	u32 fifo32;		/* 0x18 */
+	u16 fifo16;		/* 0x1C */
+	u8 rsvd0[2];
+	u8 ffill;		/* 0x20 */
+	u8 rsvd1[3];
+
+	/* ATA */
+	u8 cr;			/* 0x24 */
+	u8 rsvd2[3];
+	u8 isr;			/* 0x28 */
+	u8 rsvd3[3];
+	u8 ier;			/* 0x2C */
+	u8 rsvd4[3];
+	u8 icr;			/* 0x30 */
+	u8 rsvd5[3];
+	u8 falarm;		/* 0x34 */
+	u8 rsvd6[106];
+} atac_t;
+
+#endif				/* __ATA_H__ */
diff --git a/include/asm-m68k/coldfire/dspi.h b/include/asm-m68k/coldfire/dspi.h
index 8327e1b68..4b7d61e0f 100644
--- a/include/asm-m68k/coldfire/dspi.h
+++ b/include/asm-m68k/coldfire/dspi.h
@@ -46,15 +46,14 @@ typedef struct dspi {
 	u32 dirsr;
 	u32 dtfr;
 	u32 drfr;
-	u32 dtfdr0;
-	u32 dtfdr1;
-	u32 dtfdr2;
-	u32 dtfdr3;
+#ifdef CONFIG_MCF547x_8x
+	u32 dtfdr[4];
 	u8 resv1[0x30];
-	u32 drfdr0;
-	u32 drfdr1;
-	u32 drfdr2;
-	u32 drfdr3;
+	u32 drfdr[4];
+#else
+	u32 dtfdr[16];
+	u32 drfdr[16];
+#endif
 } dspi_t;
 
 /* Bit definitions and macros for DMCR */
diff --git a/include/asm-m68k/coldfire/eport.h b/include/asm-m68k/coldfire/eport.h
new file mode 100644
index 000000000..1d1bf6331
--- /dev/null
+++ b/include/asm-m68k/coldfire/eport.h
@@ -0,0 +1,139 @@
+/*
+ * Edge Port Memory Map
+ *
+ * Copyright (C) 2004-2008 Freescale Semiconductor, Inc.
+ * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __EPORT_H__
+#define __EPORT_H__
+
+/* Edge Port Module (EPORT) */
+typedef struct eport {
+#ifdef CONFIG_MCF547x_8x
+	u16 par;	/* 0x00 */
+	u16 res0;	/* 0x02 */
+	u8 ddr;		/* 0x04 */
+	u8 ier;		/* 0x05 */
+	u16 res1;	/* 0x06 */
+	u8 dr;		/* 0x08 */
+	u8 pdr;		/* 0x09 */
+	u16 res2;	/* 0x0A */
+	u8 fr;		/* 0x0C */
+	u8 res3[3];	/* 0x0D */
+#else
+	u16 par;	/* 0x00 Pin Assignment */
+	u8 ddr;		/* 0x02 Data Direction */
+	u8 ier;		/* 0x03 Interrupt Enable */
+	u8 dr;		/* 0x04 Data */
+	u8 pdr;		/* 0x05 Pin Data */
+	u8 fr;		/* 0x06 Flag */
+	u8 res0;
+#endif
+} eport_t;
+
+/* EPPAR */
+#define EPORT_PAR_EPPA1(x)		(((x)&0x0003)<<2)
+#define EPORT_PAR_EPPA2(x)		(((x)&0x0003)<<4)
+#define EPORT_PAR_EPPA3(x)		(((x)&0x0003)<<6)
+#define EPORT_PAR_EPPA4(x)		(((x)&0x0003)<<8)
+#define EPORT_PAR_EPPA5(x)		(((x)&0x0003)<<10)
+#define EPORT_PAR_EPPA6(x)		(((x)&0x0003)<<12)
+#define EPORT_PAR_EPPA7(x)		(((x)&0x0003)<<14)
+#define EPORT_PAR_LEVEL			(0)
+#define EPORT_PAR_RISING		(1)
+#define EPORT_PAR_FALLING		(2)
+#define EPORT_PAR_BOTH			(3)
+#define EPORT_PAR_EPPA7_LEVEL		(0x0000)
+#define EPORT_PAR_EPPA7_RISING		(0x4000)
+#define EPORT_PAR_EPPA7_FALLING		(0x8000)
+#define EPORT_PAR_EPPA7_BOTH		(0xC000)
+#define EPORT_PAR_EPPA6_LEVEL		(0x0000)
+#define EPORT_PAR_EPPA6_RISING		(0x1000)
+#define EPORT_PAR_EPPA6_FALLING		(0x2000)
+#define EPORT_PAR_EPPA6_BOTH		(0x3000)
+#define EPORT_PAR_EPPA5_LEVEL		(0x0000)
+#define EPORT_PAR_EPPA5_RISING		(0x0400)
+#define EPORT_PAR_EPPA5_FALLING		(0x0800)
+#define EPORT_PAR_EPPA5_BOTH		(0x0C00)
+#define EPORT_PAR_EPPA4_LEVEL		(0x0000)
+#define EPORT_PAR_EPPA4_RISING		(0x0100)
+#define EPORT_PAR_EPPA4_FALLING		(0x0200)
+#define EPORT_PAR_EPPA4_BOTH		(0x0300)
+#define EPORT_PAR_EPPA3_LEVEL		(0x0000)
+#define EPORT_PAR_EPPA3_RISING		(0x0040)
+#define EPORT_PAR_EPPA3_FALLING		(0x0080)
+#define EPORT_PAR_EPPA3_BOTH		(0x00C0)
+#define EPORT_PAR_EPPA2_LEVEL		(0x0000)
+#define EPORT_PAR_EPPA2_RISING		(0x0010)
+#define EPORT_PAR_EPPA2_FALLING		(0x0020)
+#define EPORT_PAR_EPPA2_BOTH		(0x0030)
+#define EPORT_PAR_EPPA1_LEVEL		(0x0000)
+#define EPORT_PAR_EPPA1_RISING		(0x0004)
+#define EPORT_PAR_EPPA1_FALLING		(0x0008)
+#define EPORT_PAR_EPPA1_BOTH		(0x000C)
+
+/* EPDDR */
+#define EPORT_DDR_EPDD1			(0x02)
+#define EPORT_DDR_EPDD2			(0x04)
+#define EPORT_DDR_EPDD3			(0x08)
+#define EPORT_DDR_EPDD4			(0x10)
+#define EPORT_DDR_EPDD5			(0x20)
+#define EPORT_DDR_EPDD6			(0x40)
+#define EPORT_DDR_EPDD7			(0x80)
+
+/* EPIER */
+#define EPORT_IER_EPIE1			(0x02)
+#define EPORT_IER_EPIE2			(0x04)
+#define EPORT_IER_EPIE3			(0x08)
+#define EPORT_IER_EPIE4			(0x10)
+#define EPORT_IER_EPIE5			(0x20)
+#define EPORT_IER_EPIE6			(0x40)
+#define EPORT_IER_EPIE7			(0x80)
+
+/* EPDR */
+#define EPORT_DR_EPD1			(0x02)
+#define EPORT_DR_EPD2			(0x04)
+#define EPORT_DR_EPD3			(0x08)
+#define EPORT_DR_EPD4			(0x10)
+#define EPORT_DR_EPD5			(0x20)
+#define EPORT_DR_EPD6			(0x40)
+#define EPORT_DR_EPD7			(0x80)
+
+/* EPPDR */
+#define EPORT_PDR_EPPD1			(0x02)
+#define EPORT_PDR_EPPD2			(0x04)
+#define EPORT_PDR_EPPD3			(0x08)
+#define EPORT_PDR_EPPD4			(0x10)
+#define EPORT_PDR_EPPD5			(0x20)
+#define EPORT_PDR_EPPD6			(0x40)
+#define EPORT_PDR_EPPD7			(0x80)
+
+/* EPFR */
+#define EPORT_FR_EPF1			(0x02)
+#define EPORT_FR_EPF2			(0x04)
+#define EPORT_FR_EPF3			(0x08)
+#define EPORT_FR_EPF4			(0x10)
+#define EPORT_FR_EPF5			(0x20)
+#define EPORT_FR_EPF6			(0x40)
+#define EPORT_FR_EPF7			(0x80)
+
+#endif				/* __EPORT_H__ */
diff --git a/include/asm-m68k/coldfire/flexbus.h b/include/asm-m68k/coldfire/flexbus.h
index 1d902c07f..51cbbd8b2 100644
--- a/include/asm-m68k/coldfire/flexbus.h
+++ b/include/asm-m68k/coldfire/flexbus.h
@@ -31,33 +31,36 @@
 *********************************************************************/
 
 typedef struct fbcs {
-	u32 csar0;		/* Chip-select Address Register */
-	u32 csmr0;		/* Chip-select Mask Register */
-	u32 cscr0;		/* Chip-select Control Register */
-	u32 csar1;		/* Chip-select Address Register */
-	u32 csmr1;		/* Chip-select Mask Register */
-	u32 cscr1;		/* Chip-select Control Register */
-	u32 csar2;		/* Chip-select Address Register */
-	u32 csmr2;		/* Chip-select Mask Register */
-	u32 cscr2;		/* Chip-select Control Register */
-	u32 csar3;		/* Chip-select Address Register */
-	u32 csmr3;		/* Chip-select Mask Register */
-	u32 cscr3;		/* Chip-select Control Register */
-	u32 csar4;		/* Chip-select Address Register */
-	u32 csmr4;		/* Chip-select Mask Register */
-	u32 cscr4;		/* Chip-select Control Register */
-	u32 csar5;		/* Chip-select Address Register */
-	u32 csmr5;		/* Chip-select Mask Register */
-	u32 cscr5;		/* Chip-select Control Register */
+	u32 csar0;		/* Chip-select Address */
+	u32 csmr0;		/* Chip-select Mask */
+	u32 cscr0;		/* Chip-select Control */
+	u32 csar1;
+	u32 csmr1;
+	u32 cscr1;
+	u32 csar2;
+	u32 csmr2;
+	u32 cscr2;
+	u32 csar3;
+	u32 csmr3;
+	u32 cscr3;
+	u32 csar4;
+	u32 csmr4;
+	u32 cscr4;
+	u32 csar5;
+	u32 csmr5;
+	u32 cscr5;
+	u32 csar6;
+	u32 csmr6;
+	u32 cscr6;
+	u32 csar7;
+	u32 csmr7;
+	u32 cscr7;
 } fbcs_t;
 
-/* Bit definitions and macros for CSAR group */
-#define FBCS_CSAR_BA(x)			((x)&0xFFFF0000)
+#define FBCS_CSAR_BA(x)			((x) & 0xFFFF0000)
 
-/* Bit definitions and macros for CSMR group */
-#define FBCS_CSMR_V			(0x00000001)	/* Valid bit */
-#define FBCS_CSMR_WP			(0x00000100)	/* Write protect */
-#define FBCS_CSMR_BAM(x)		(((x)&0x0000FFFF)<<16)	/* Base address mask */
+#define FBCS_CSMR_BAM(x)		(((x) & 0xFFFF) << 16)
+#define FBCS_CSMR_BAM_MASK		(0x0000FFFF)
 #define FBCS_CSMR_BAM_4G		(0xFFFF0000)
 #define FBCS_CSMR_BAM_2G		(0x7FFF0000)
 #define FBCS_CSMR_BAM_1G		(0x3FFF0000)
@@ -78,21 +81,40 @@ typedef struct fbcs {
 #define FBCS_CSMR_BAM_128K		(0x00010000)
 #define FBCS_CSMR_BAM_64K		(0x00000000)
 
-/* Bit definitions and macros for CSCR group */
-#define FBCS_CSCR_BSTW			(0x00000008)	/* Burst-write enable */
-#define FBCS_CSCR_BSTR			(0x00000010)	/* Burst-read enable */
-#define FBCS_CSCR_BEM			(0x00000020)	/* Byte-enable mode */
-#define FBCS_CSCR_PS(x)			(((x)&0x00000003)<<6)	/* Port size */
-#define FBCS_CSCR_AA			(0x00000100)	/* Auto-acknowledge */
-#define FBCS_CSCR_WS(x)			(((x)&0x0000003F)<<10)	/* Wait states */
-#define FBCS_CSCR_WRAH(x)		(((x)&0x00000003)<<16)	/* Write address hold or deselect */
-#define FBCS_CSCR_RDAH(x)		(((x)&0x00000003)<<18)	/* Read address hold or deselect */
-#define FBCS_CSCR_ASET(x)		(((x)&0x00000003)<<20)	/* Address setup */
-#define FBCS_CSCR_SWSEN			(0x00800000)	/* Secondary wait state enable */
-#define FBCS_CSCR_SWS(x)		(((x)&0x0000003F)<<26)	/* Secondary wait states */
+#ifdef CONFIG_M5249
+#define FBCS_CSMR_WP			(0x00000080)
+#define FBCS_CSMR_AM			(0x00000040)
+#define FBCS_CSMR_CI			(0x00000020)
+#define FBCS_CSMR_SC			(0x00000010)
+#define FBCS_CSMR_SD			(0x00000008)
+#define FBCS_CSMR_UC			(0x00000004)
+#define FBCS_CSMR_UD			(0x00000002)
+#else
+#define FBCS_CSMR_WP			(0x00000100)
+#endif
+#define FBCS_CSMR_V			(0x00000001)	/* Valid bit */
+
+#define FBCS_CSCR_SWS(x)		(((x) & 0x3F) << 26)
+#define FBCS_CSCR_SWS_MASK		(0x03FFFFFF)
+#define FBCS_CSCR_SWSEN			(0x00800000)
+#define FBCS_CSCR_ASET(x)		(((x) & 0x03) << 20)
+#define FBCS_CSCR_ASET_MASK		(0xFFCFFFFF)
+#define FBCS_CSCR_RDAH(x)		(((x) & 0x03) << 18)
+#define FBCS_CSCR_RDAH_MASK		(0xFFF3FFFF)
+#define FBCS_CSCR_WRAH(x)		(((x) & 0x03) << 16)
+#define FBCS_CSCR_WRAH_MASK		(0xFFFCFFFF)
+#define FBCS_CSCR_WS(x)			(((x) & 0x3F) << 10)
+#define FBCS_CSCR_WS_MASK		(0xFFFF03FF)
+#define FBCS_CSCR_SBM			(0x00000200)
+#define FBCS_CSCR_AA			(0x00000100)
+#define FBCS_CSCR_PS(x)			(((x) & 0x03) << 6)
+#define FBCS_CSCR_PS_MASK		(0xFFFFFF3F)
+#define FBCS_CSCR_BEM			(0x00000020)
+#define FBCS_CSCR_BSTR			(0x00000010)
+#define FBCS_CSCR_BSTW			(0x00000008)
 
-#define FBCS_CSCR_PS_8			(0x00000040)
 #define FBCS_CSCR_PS_16			(0x00000080)
+#define FBCS_CSCR_PS_8			(0x00000040)
 #define FBCS_CSCR_PS_32			(0x00000000)
 
 #endif				/* __FLEXBUS_H */
diff --git a/include/asm-m68k/coldfire/flexcan.h b/include/asm-m68k/coldfire/flexcan.h
new file mode 100644
index 000000000..cafd44ff4
--- /dev/null
+++ b/include/asm-m68k/coldfire/flexcan.h
@@ -0,0 +1,219 @@
+/*
+ * Flex CAN Memory Map
+ *
+ * Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
+ * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __FLEXCAN_H__
+#define __FLEXCAN_H__
+
+/* FlexCan Message Buffer */
+typedef struct can_msgbuf_ctrl {
+#ifdef CONFIG_M5282
+	u8 tmstamp;		/* 0x00 Timestamp */
+	u8 ctrl;		/* 0x01 Control */
+	u16 idh;		/* 0x02 ID High */
+	u16 idl;		/* 0x04 ID High */
+	u8 data[8];		/* 0x06 8 Byte Data Field */
+	u16 res;		/* 0x0E */
+#else
+	u16 ctrl;		/* 0x00 Control/Status */
+	u16 tmstamp;		/* 0x02 Timestamp */
+	u32 id;			/* 0x04 Identifier */
+	u8 data[8];		/* 0x08 8 Byte Data Field */
+#endif
+} can_msg_t;
+
+#ifdef CONFIG_M5282
+/* MSGBUF CTRL */
+#define CAN_MSGBUF_CTRL_CODE(x)		(((x) & 0x0F) << 4)
+#define CAN_MSGBUF_CTRL_CODE_MASK	(0x0F)
+#define CAN_MSGBUF_CTRL_LEN(x)		((x) & 0x0F)
+#define CAN_MSGBUF_CTRL_LEN_MASK	(0xF0)
+
+/* MSGBUF ID */
+#define CAN_MSGBUF_IDH_STD(x)		(((x) & 0x07FF) << 5)
+#define CAN_MSGBUF_IDH_STD_MASK		(0xE003FFFF)
+#define CAN_MSGBUF_IDH_SRR		(0x0010)
+#define CAN_MSGBUF_IDH_IDE		(0x0080)
+#define CAN_MSGBUF_IDH_EXTH(x)		((x) & 0x07)
+#define CAN_MSGBUF_IDH_EXTH_MASK	(0xFFF8)
+#define CAN_MSGBUF_IDL_EXTL(x)		(((x) & 0x7FFF) << 1)
+#define CAN_MSGBUF_IDL_EXTL_MASK		(0xFFFE)
+#define CAN_MSGBUF_IDL_RTR		(0x0001)
+#else
+/* MSGBUF CTRL */
+#define CAN_MSGBUF_CTRL_CODE(x)		(((x) & 0x000F) << 8)
+#define CAN_MSGBUF_CTRL_CODE_MASK	(0xF0FF)
+#define CAN_MSGBUF_CTRL_SRR		(0x0040)
+#define CAN_MSGBUF_CTRL_IDE		(0x0020)
+#define CAN_MSGBUF_CTRL_RTR		(0x0010)
+#define CAN_MSGBUF_CTRL_LEN(x)		((x) & 0x000F)
+#define CAN_MSGBUF_CTRL_LEN_MASK	(0xFFF0)
+
+/* MSGBUF ID */
+#define CAN_MSGBUF_ID_STD(x)		(((x) & 0x000007FF) << 18)
+#define CAN_MSGBUF_ID_STD_MASK		(0xE003FFFF)
+#define CAN_MSGBUF_ID_EXT(x)		((x) & 0x0003FFFF)
+#define CAN_MSGBUF_ID_EXT_MASK		(0xFFFC0000)
+#endif
+
+/* FlexCan module */
+typedef struct can_ctrl {
+	u32 mcr;		/* 0x00 Module Configuration */
+	u32 ctrl;		/* 0x04 Control */
+	u32 timer;		/* 0x08 Free Running Timer */
+	u32 res1;		/* 0x0C */
+	u32 rxgmsk;		/* 0x10 Rx Global Mask */
+	u32 rx14msk;		/* 0x14 RxBuffer 14 Mask */
+	u32 rx15msk;		/* 0x18 RxBuffer 15 Mask */
+#ifdef CONFIG_M5282
+	u32 res2;		/* 0x1C */
+	u16 errstat;		/* 0x20 Error and status */
+	u16 imsk;		/* 0x22 Interrupt Mask */
+	u16 iflag;		/* 0x24 Interrupt Flag */
+	u16 errcnt;		/* 0x26 Error Counter */
+	u32 res3[3];		/* 0x28 - 0x33 */
+#else
+	u16 res2;		/* 0x1C */
+	u16 errcnt;		/* 0x1E Error Counter */
+	u16 res3;		/* 0x20 */
+	u16 errstat;		/* 0x22 Error and status */
+	u32 res4;		/* 0x24 */
+	u32 imsk;		/* 0x28 Interrupt Mask */
+	u32 res5;		/* 0x2C */
+	u16 iflag;		/* 0x30 Interrupt Flag */
+#endif
+	u32 res6[19];		/* 0x34 - 0x7F */
+	void *msgbuf;		/* 0x80 Message Buffer 0-15 */
+} can_t;
+
+/* MCR */
+#define CAN_MCR_MDIS			(0x80000000)
+#define CAN_MCR_FRZ			(0x40000000)
+#define CAN_MCR_HALT			(0x10000000)
+#define CAN_MCR_NORDY			(0x08000000)
+#define CAN_MCF_WAKEMSK			(0x04000000)	/* 5282 */
+#define CAN_MCR_SOFTRST			(0x02000000)
+#define CAN_MCR_FRZACK			(0x01000000)
+#define CAN_MCR_SUPV			(0x00800000)
+#define CAN_MCR_SELFWAKE		(0x00400000)	/* 5282 */
+#define CAN_MCR_APS			(0x00200000)	/* 5282 */
+#define CAN_MCR_LPMACK			(0x00100000)
+#define CAN_MCF_BCC			(0x00010000)
+#define CAN_MCR_MAXMB(x)		((x) & 0x0F)
+#define CAN_MCR_MAXMB_MASK		(0xFFFFFFF0)
+
+/* CTRL */
+#define CAN_CTRL_PRESDIV(x)		(((x) & 0xFF) << 24)
+#define CAN_CTRL_PRESDIV_MASK		(0x00FFFFFF)
+#define CAN_CTRL_RJW(x)			(((x) & 0x03) << 22)
+#define CAN_CTRL_RJW_MASK		(0xFF3FFFFF)
+#define CAN_CTRL_PSEG1(x)		(((x) & 0x07) << 19)
+#define CAN_CTRL_PSEG1_MASK		(0xFFC7FFFF)
+#define CAN_CTRL_PSEG2(x)		(((x) & 0x07) << 16)
+#define CAN_CTRL_PSEG2_MASK		(0xFFF8FFFF)
+#define CAN_CTRL_BOFFMSK		(0x00008000)
+#define CAN_CTRL_ERRMSK			(0x00004000)
+#define CAN_CTRL_CLKSRC			(0x00002000)
+#define CAN_CTRL_LPB			(0x00001000)
+#define CAN_CTRL_RXMODE			(0x00000400)	/* 5282 */
+#define CAN_CTRL_TXMODE(x)		(((x) & 0x03) << 8)	/* 5282 */
+#define CAN_CTRL_TXMODE_MASK		(0xFFFFFCFF)	/* 5282 */
+#define CAN_CTRL_TXMODE_CAN0		(0x00000000)	/* 5282 */
+#define CAN_CTRL_TXMODE_CAN1		(0x00000100)	/* 5282 */
+#define CAN_CTRL_TXMODE_OPEN		(0x00000200)	/* 5282 */
+#define CAN_CTRL_SMP			(0x00000080)
+#define CAN_CTRL_BOFFREC		(0x00000040)
+#define CAN_CTRL_TSYNC			(0x00000020)
+#define CAN_CTRL_LBUF			(0x00000010)
+#define CAN_CTRL_LOM			(0x00000008)
+#define CAN_CTRL_PROPSEG(x)		((x) & 0x07)
+#define CAN_CTRL_PROPSEG_MASK		(0xFFFFFFF8)
+
+/* TIMER */
+/* Note: PRESDIV, RJW, PSG1, and PSG2 are part of timer in 5282 */
+#define CAN_TIMER(x)			((x) & 0xFFFF)
+#define CAN_TIMER_MASK			(0xFFFF0000)
+
+/* RXGMASK */
+#ifdef CONFIG_M5282
+#define CAN_RXGMSK_MI_STD(x)		(((x) & 0x000007FF) << 21)
+#define CAN_RXGMSK_MI_STD_MASK		(0x001FFFFF)
+#define CAN_RXGMSK_MI_EXT(x)		(((x) & 0x0003FFFF) << 1)
+#define CAN_RXGMSK_MI_EXT_MASK		(0xFFF80001)
+#else
+#define CAN_RXGMSK_MI_STD(x)		(((x) & 0x000007FF) << 18)
+#define CAN_RXGMSK_MI_STD_MASK		(0xE003FFFF)
+#define CAN_RXGMSK_MI_EXT(x)		((x) & 0x0003FFFF)
+#define CAN_RXGMSK_MI_EXT_MASK		(0xFFFC0000)
+#endif
+
+/* ERRCNT */
+#define CAN_ERRCNT_RXECTR(x)		(((x) & 0xFF) << 8)
+#define CAN_ERRCNT_RXECTR_MASK		(0x00FF)
+#define CAN_ERRCNT_TXECTR(x)		((x) & 0xFF)
+#define CAN_ERRCNT_TXECTR_MASK		(0xFF00)
+
+/* ERRSTAT */
+#define CAN_ERRSTAT_BITERR1		(0x8000)
+#define CAN_ERRSTAT_BITERR0		(0x4000)
+#define CAN_ERRSTAT_ACKERR		(0x2000)
+#define CAN_ERRSTAT_CRCERR		(0x1000)
+#define CAN_ERRSTAT_FRMERR		(0x0800)
+#define CAN_ERRSTAT_STFERR		(0x0400)
+#define CAN_ERRSTAT_TXWRN		(0x0200)
+#define CAN_ERRSTAT_RXWRN		(0x0100)
+#define CAN_ERRSTAT_IDLE		(0x0080)
+#define CAN_ERRSTAT_TXRX		(0x0040)
+#define CAN_ERRSTAT_FLT_MASK		(0xFFCF)
+#define CAN_ERRSTAT_FLT_BUSOFF		(0x0020)
+#define CAN_ERRSTAT_FLT_PASSIVE		(0x0010)
+#define CAN_ERRSTAT_FLT_ACTIVE		(0x0000)
+#ifdef CONFIG_M5282
+#define CAN_ERRSTAT_BOFFINT		(0x0004)
+#define CAN_ERRSTAT_ERRINT		(0x0002)
+#else
+#define CAN_ERRSTAT_ERRINT		(0x0004)
+#define CAN_ERRSTAT_BOFFINT		(0x0002)
+#define CAN_ERRSTAT_WAKEINT		(0x0001)
+#endif
+
+/* IMASK */
+#ifdef CONFIG_M5253
+#define CAN_IMASK_BUFnM(x)		(1 << (x & 0xFFFFFFFF))
+#define CAN_IMASK_BUFnM_MASKBIT(x)	~CAN_IMASK_BUFnM(x)
+#else
+#define CAN_IMASK_BUFnM(x)		(1 << (x & 0xFFFF))
+#define CAN_IMASK_BUFnM_MASKBIT(x)	~CAN_IMASK_BUFnM(x)
+#endif
+
+/* IFLAG */
+#ifdef CONFIG_M5253
+#define CAN_IFLAG_BUFnM(x)		(1 << (x & 0xFFFFFFFF))
+#define CAN_IFLAG_BUFnM_MASKBIT(x)	~CAN_IFLAG_BUFnM(x)
+#else
+#define CAN_IFLAG_BUFnM(x)		(1 << (x & 0xFFFF))
+#define CAN_IFLAG_BUFnM_MASKBIT(x)	~CAN_IFLAG_BUFnM(x)
+#endif
+
+#endif				/* __FLEXCAN_H__ */
diff --git a/include/asm-m68k/coldfire/intctrl.h b/include/asm-m68k/coldfire/intctrl.h
new file mode 100644
index 000000000..ae82b292b
--- /dev/null
+++ b/include/asm-m68k/coldfire/intctrl.h
@@ -0,0 +1,246 @@
+/*
+ * Interrupt Controller Memory Map
+ *
+ * Copyright (C) 2004-2008 Freescale Semiconductor, Inc.
+ * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __INTCTRL_H__
+#define __INTCTRL_H__
+
+#if defined(CONFIG_M5235) || defined(CONFIG_M5271) || \
+    defined(CONFIG_M5275) || defined(CONFIG_M5282) || \
+    defined(CONFIG_M547x) || defined(CONFIG_M548x)
+#	define	CONFIG_SYS_CF_INTC_REG1
+#endif
+
+typedef struct int0_ctrl {
+	/* Interrupt Controller 0 */
+	u32 iprh0;		/* 0x00 Pending High */
+	u32 iprl0;		/* 0x04 Pending Low */
+	u32 imrh0;		/* 0x08 Mask High */
+	u32 imrl0;		/* 0x0C Mask Low */
+	u32 frch0;		/* 0x10 Force High */
+	u32 frcl0;		/* 0x14 Force Low */
+#if defined(CONFIG_SYS_CF_INTC_REG1)
+	u8 irlr;		/* 0x18 */
+	u8 iacklpr;		/* 0x19 */
+	u16 res1[19];		/* 0x1a - 0x3c */
+#else
+	u16 res1;		/* 0x18 - 0x19 */
+	u16 icfg0;		/* 0x1A Configuration */
+	u8 simr0;		/* 0x1C Set Interrupt Mask */
+	u8 cimr0;		/* 0x1D Clear Interrupt Mask */
+	u8 clmask0;		/* 0x1E Current Level Mask */
+	u8 slmask;		/* 0x1F Saved Level Mask */
+	u32 res2[8];		/* 0x20 - 0x3F */
+#endif
+	u8 icr0[64];		/* 0x40 - 0x7F Control registers */
+	u32 res3[24];		/* 0x80 - 0xDF */
+	u8 swiack0;		/* 0xE0 Software Interrupt ack */
+	u8 res4[3];		/* 0xE1 - 0xE3 */
+	u8 L1iack0;		/* 0xE4 Level n interrupt ack */
+	u8 res5[3];		/* 0xE5 - 0xE7 */
+	u8 L2iack0;		/* 0xE8 Level n interrupt ack */
+	u8 res6[3];		/* 0xE9 - 0xEB */
+	u8 L3iack0;		/* 0xEC Level n interrupt ack */
+	u8 res7[3];		/* 0xED - 0xEF */
+	u8 L4iack0;		/* 0xF0 Level n interrupt ack */
+	u8 res8[3];		/* 0xF1 - 0xF3 */
+	u8 L5iack0;		/* 0xF4 Level n interrupt ack */
+	u8 res9[3];		/* 0xF5 - 0xF7 */
+	u8 L6iack0;		/* 0xF8 Level n interrupt ack */
+	u8 resa[3];		/* 0xF9 - 0xFB */
+	u8 L7iack0;		/* 0xFC Level n interrupt ack */
+	u8 resb[3];		/* 0xFD - 0xFF */
+} int0_t;
+
+typedef struct int1_ctrl {
+	/* Interrupt Controller 1 */
+	u32 iprh1;		/* 0x00 Pending High */
+	u32 iprl1;		/* 0x04 Pending Low */
+	u32 imrh1;		/* 0x08 Mask High */
+	u32 imrl1;		/* 0x0C Mask Low */
+	u32 frch1;		/* 0x10 Force High */
+	u32 frcl1;		/* 0x14 Force Low */
+#if defined(CONFIG_SYS_CF_INTC_REG1)
+	u8 irlr;		/* 0x18 */
+	u8 iacklpr;		/* 0x19 */
+	u16 res1[19];		/* 0x1a - 0x3c */
+#else
+	u16 res1;		/* 0x18 */
+	u16 icfg1;		/* 0x1A Configuration */
+	u8 simr1;		/* 0x1C Set Interrupt Mask */
+	u8 cimr1;		/* 0x1D Clear Interrupt Mask */
+	u16 res2;		/* 0x1E - 0x1F */
+	u32 res3[8];		/* 0x20 - 0x3F */
+#endif
+	u8 icr1[64];		/* 0x40 - 0x7F */
+	u32 res4[24];		/* 0x80 - 0xDF */
+	u8 swiack1;		/* 0xE0 Software Interrupt ack */
+	u8 res5[3];		/* 0xE1 - 0xE3 */
+	u8 L1iack1;		/* 0xE4 Level n interrupt ack */
+	u8 res6[3];		/* 0xE5 - 0xE7 */
+	u8 L2iack1;		/* 0xE8 Level n interrupt ack */
+	u8 res7[3];		/* 0xE9 - 0xEB */
+	u8 L3iack1;		/* 0xEC Level n interrupt ack */
+	u8 res8[3];		/* 0xED - 0xEF */
+	u8 L4iack1;		/* 0xF0 Level n interrupt ack */
+	u8 res9[3];		/* 0xF1 - 0xF3 */
+	u8 L5iack1;		/* 0xF4 Level n interrupt ack */
+	u8 resa[3];		/* 0xF5 - 0xF7 */
+	u8 L6iack1;		/* 0xF8 Level n interrupt ack */
+	u8 resb[3];		/* 0xF9 - 0xFB */
+	u8 L7iack1;		/* 0xFC Level n interrupt ack */
+	u8 resc[3];		/* 0xFD - 0xFF */
+} int1_t;
+
+typedef struct intgack_ctrl1 {
+	/* Global IACK Registers */
+	u8 swiack;		/* 0x00 Global Software Interrupt ack */
+	u8 res0[0x3];
+	u8 gl1iack;		/* 0x04 */
+	u8 resv1[0x3];
+	u8 gl2iack;		/* 0x08 */
+	u8 res2[0x3];
+	u8 gl3iack;		/* 0x0C */
+	u8 res3[0x3];
+	u8 gl4iack;		/* 0x10 */
+	u8 res4[0x3];
+	u8 gl5iack;		/* 0x14 */
+	u8 res5[0x3];
+	u8 gl6iack;		/* 0x18 */
+	u8 res6[0x3];
+	u8 gl7iack;		/* 0x1C */
+	u8 res7[0x3];
+} intgack_t;
+
+#define INTC_IPRH_INT63			(0x80000000)
+#define INTC_IPRH_INT62			(0x40000000)
+#define INTC_IPRH_INT61			(0x20000000)
+#define INTC_IPRH_INT60			(0x10000000)
+#define INTC_IPRH_INT59			(0x08000000)
+#define INTC_IPRH_INT58			(0x04000000)
+#define INTC_IPRH_INT57			(0x02000000)
+#define INTC_IPRH_INT56			(0x01000000)
+#define INTC_IPRH_INT55			(0x00800000)
+#define INTC_IPRH_INT54			(0x00400000)
+#define INTC_IPRH_INT53			(0x00200000)
+#define INTC_IPRH_INT52			(0x00100000)
+#define INTC_IPRH_INT51			(0x00080000)
+#define INTC_IPRH_INT50			(0x00040000)
+#define INTC_IPRH_INT49			(0x00020000)
+#define INTC_IPRH_INT48			(0x00010000)
+#define INTC_IPRH_INT47			(0x00008000)
+#define INTC_IPRH_INT46			(0x00004000)
+#define INTC_IPRH_INT45			(0x00002000)
+#define INTC_IPRH_INT44			(0x00001000)
+#define INTC_IPRH_INT43			(0x00000800)
+#define INTC_IPRH_INT42			(0x00000400)
+#define INTC_IPRH_INT41			(0x00000200)
+#define INTC_IPRH_INT40			(0x00000100)
+#define INTC_IPRH_INT39			(0x00000080)
+#define INTC_IPRH_INT38			(0x00000040)
+#define INTC_IPRH_INT37			(0x00000020)
+#define INTC_IPRH_INT36			(0x00000010)
+#define INTC_IPRH_INT35			(0x00000008)
+#define INTC_IPRH_INT34			(0x00000004)
+#define INTC_IPRH_INT33			(0x00000002)
+#define INTC_IPRH_INT32			(0x00000001)
+
+#define INTC_IPRL_INT31			(0x80000000)
+#define INTC_IPRL_INT30			(0x40000000)
+#define INTC_IPRL_INT29			(0x20000000)
+#define INTC_IPRL_INT28			(0x10000000)
+#define INTC_IPRL_INT27			(0x08000000)
+#define INTC_IPRL_INT26			(0x04000000)
+#define INTC_IPRL_INT25			(0x02000000)
+#define INTC_IPRL_INT24			(0x01000000)
+#define INTC_IPRL_INT23			(0x00800000)
+#define INTC_IPRL_INT22			(0x00400000)
+#define INTC_IPRL_INT21			(0x00200000)
+#define INTC_IPRL_INT20			(0x00100000)
+#define INTC_IPRL_INT19			(0x00080000)
+#define INTC_IPRL_INT18			(0x00040000)
+#define INTC_IPRL_INT17			(0x00020000)
+#define INTC_IPRL_INT16			(0x00010000)
+#define INTC_IPRL_INT15			(0x00008000)
+#define INTC_IPRL_INT14			(0x00004000)
+#define INTC_IPRL_INT13			(0x00002000)
+#define INTC_IPRL_INT12			(0x00001000)
+#define INTC_IPRL_INT11			(0x00000800)
+#define INTC_IPRL_INT10			(0x00000400)
+#define INTC_IPRL_INT9			(0x00000200)
+#define INTC_IPRL_INT8			(0x00000100)
+#define INTC_IPRL_INT7			(0x00000080)
+#define INTC_IPRL_INT6			(0x00000040)
+#define INTC_IPRL_INT5			(0x00000020)
+#define INTC_IPRL_INT4			(0x00000010)
+#define INTC_IPRL_INT3			(0x00000008)
+#define INTC_IPRL_INT2			(0x00000004)
+#define INTC_IPRL_INT1			(0x00000002)
+#define INTC_IPRL_INT0			(0x00000001)
+
+#define INTC_IMRLn_MASKALL		(0x00000001)
+
+#define INTC_IRLR(x)			(((x) & 0x7F) << 1)
+#define INTC_IRLR_MASK			(0x01)
+
+#define INTC_IACKLPR_LVL(x)		(((x) & 0x07) << 4)
+#define INTC_IACKLPR_LVL_MASK		(0x8F)
+#define INTC_IACKLPR_PRI(x)		((x) & 0x0F)
+#define INTC_IACKLPR_PRI_MASK		(0xF0)
+
+#if defined(CONFIG_SYS_CF_INTC_REG1)
+#define INTC_ICR_IL(x)			(((x) & 0x07) << 3)
+#define INTC_ICR_IL_MASK		(0xC7)
+#define INTC_ICR_IP(x)			((x) & 0x07)
+#define INTC_ICR_IP_MASK		(0xF8)
+#else
+#define INTC_ICR_IL(x)			((x) & 0x07)
+#define INTC_ICR_IL_MASK		(0xF8)
+#endif
+
+#define INTC_ICONFIG_ELVLPRI_MASK	(0x01FF)
+#define INTC_ICONFIG_ELVLPRI7		(0x8000)
+#define INTC_ICONFIG_ELVLPRI6		(0x4000)
+#define INTC_ICONFIG_ELVLPRI5		(0x2000)
+#define INTC_ICONFIG_ELVLPRI4		(0x1000)
+#define INTC_ICONFIG_ELVLPRI3		(0x0800)
+#define INTC_ICONFIG_ELVLPRI2		(0x0400)
+#define INTC_ICONFIG_ELVLPRI1		(0x0200)
+#define INTC_ICONFIG_EMASK		(0x0020)
+
+#define INTC_SIMR_ALL			(0x40)
+#define INTC_SIMR(x)			((x) & 0x3F)
+#define INTC_SIMR_MASK			(0x80)
+
+#define INTC_CIMR_ALL			(0x40)
+#define INTC_CIMR(x)			((x) & 0x3F)
+#define INTC_CIMR_MASK			(0x80)
+
+#define INTC_CLMASK(x)			((x) & 0x0F)
+#define INTC_CLMASK_MASK		(0xF0)
+
+#define INTC_SLMASK(x)			((x) & 0x0F)
+#define INTC_SLMASK_MASK		(0xF0)
+
+#endif				/* __INTCTRL_H__ */
diff --git a/include/asm-m68k/coldfire/mdha.h b/include/asm-m68k/coldfire/mdha.h
new file mode 100644
index 000000000..b69813637
--- /dev/null
+++ b/include/asm-m68k/coldfire/mdha.h
@@ -0,0 +1,102 @@
+/*
+ * Message Digest Hardware Accelerator Memory Map
+ *
+ * Copyright (C) 2004-2008 Freescale Semiconductor, Inc.
+ * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __MDHA_H__
+#define __MDHA_H__
+
+/* Message Digest Hardware Accelerator */
+typedef struct mdha_ctrl {
+	u32 mr;			/* 0x00 MDHA Mode */
+	u32 cr;			/* 0x04 Control */
+	u32 cmd;		/* 0x08 Command */
+	u32 sr;			/* 0x0C Status */
+	u32 isr;		/* 0x10 Interrupt Status */
+	u32 imr;		/* 0x14 Interrupt Mask */
+	u32 dsz;		/* 0x1C Data Size */
+	u32 inp;		/* 0x20 Input FIFO */
+	u32 res1[3];		/* 0x24 - 0x2F */
+	u32 mda0;		/* 0x30 Message Digest AO */
+	u32 mdb0;		/* 0x34 Message Digest BO */
+	u32 mdc0;		/* 0x38 Message Digest CO */
+	u32 mdd0;		/* 0x3C Message Digest DO */
+	u32 mde0;		/* 0x40 Message Digest EO */
+	u32 mdsz;		/* 0x44 Message Data Size */
+	u32 res[10];		/* 0x48 - 0x6F */
+	u32 mda1;		/* 0x70 Message Digest A1 */
+	u32 mdb1;		/* 0x74 Message Digest B1 */
+	u32 mdc1;		/* 0x78 Message Digest C1 */
+	u32 mdd1;		/* 0x7C Message Digest D1 */
+	u32 mde1;		/* 0x80 Message Digest E1 */
+} mdha_t;
+
+#define MDHA_MR_SSL		(0x00000400)
+#define MDHA_MR_MACFUL		(0x00000200)
+#define MDHA_MR_SWAP		(0x00000100)
+#define MDHA_MR_OPAD		(0x00000080)
+#define MDHA_MR_IPAD		(0x00000040)
+#define MDHA_MR_INIT		(0x00000020)
+#define MDHA_MR_MAC(x)		(((x) & 0x03) << 3)
+#define MDHA_MR_MAC_MASK	(0xFFFFFFE7)
+#define MDHA_MR_MAC_EHMAC	(0x00000010)
+#define MDHA_MR_MAC_HMAC	(0x00000008)
+#define MDHA_MR_MAC_NONE	(0x00000000)
+#define MDHA_MR_PDATA		(0x00000004)
+#define MDHA_MR_ALG		(0x00000001)
+
+#define MDHA_CR_DMAL(x)		(((x) & 0x1F) << 16)	/* 532x */
+#define MDHA_CR_DMAL_MASK	(0xFFE0FFFF)		/* 532x */
+#define MDHA_CR_END		(0x00000004)		/* 532x */
+#define MDHA_CR_DMA		(0x00000002)		/* 532x */
+#define MDHA_CR_IE		(0x00000001)
+
+#define MDHA_CMD_GO		(0x00000008)
+#define MDHA_CMD_CI		(0x00000004)
+#define MDHA_CMD_RI		(0x00000001)
+#define MDHA_CMD_SWR		(0x00000001)
+
+#define MDHA_SR_IFL(x)		(((x) & 0xFF) << 16)
+#define MDHA_SR_IFL_MASK	(0xFF00FFFF)
+#define MDHA_SR_APD(x)		(((x) & 0x7) << 13)
+#define MDHA_SR_APD_MASK	(0xFFFF1FFF)
+#define MDHA_SR_FS(x)		(((x) & 0x7) << 8)
+#define MDHA_SR_FS_MASK		(0xFFFFF8FF)
+#define MDHA_SR_GNW		(0x00000080)
+#define MDHA_SR_HSH		(0x00000040)
+#define MDHA_SR_BUSY		(0x00000010)
+#define MDHA_SR_RD		(0x00000008)
+#define MDHA_SR_ERR		(0x00000004)
+#define MDHA_SR_DONE		(0x00000002)
+#define MDHA_SR_INT		(0x00000001)
+
+#define MDHA_ISR_DRL		(0x00000400)		/* 532x */
+#define MDHA_ISR_GTDS		(0x00000200)
+#define MDHA_ISR_ERE		(0x00000100)
+#define MDHA_ISR_RMDP		(0x00000080)
+#define MDHA_ISR_DSE		(0x00000020)
+#define MDHA_ISR_IME		(0x00000010)
+#define MDHA_ISR_NEIF		(0x00000004)
+#define MDHA_ISR_IFO		(0x00000001)
+
+#endif				/* __MDHA_H__ */
diff --git a/include/asm-m68k/coldfire/pwm.h b/include/asm-m68k/coldfire/pwm.h
new file mode 100644
index 000000000..f737d98c1
--- /dev/null
+++ b/include/asm-m68k/coldfire/pwm.h
@@ -0,0 +1,115 @@
+/*
+ * Pulse Width Modulation Memory Map
+ *
+ * Copyright (C) 2004-2008 Freescale Semiconductor, Inc.
+ * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __ATA_H__
+#define __ATA_H__
+
+/* Pulse Width Modulation (PWM) */
+typedef struct pwm_ctrl {
+#ifdef CONFIG_M5272
+	u8 cr0;
+	u8 res1[3];
+	u8 cr1;
+	u8 res2[3];
+	u8 cr2;
+	u8 res3[7];
+	u8 pwr0;
+	u8 res4[3];
+	u8 pwr1;
+	u8 res5[3];
+	u8 pwr2;
+	u8 res6[7];
+#else
+	u8 en;			/* 0x00 PWM Enable */
+	u8 pol;			/* 0x01 Polarity */
+	u8 clk;			/* 0x02 Clock Select */
+	u8 prclk;		/* 0x03 Prescale Clock Select */
+	u8 cae;			/* 0x04 Center Align Enable */
+	u8 ctl;			/* 0x05 Control */
+	u16 res1;		/* 0x06 - 0x07 */
+	u8 scla;		/* 0x08 Scale A */
+	u8 sclb;		/* 0x09 Scale B */
+	u16 res2;		/* 0x0A - 0x0B */
+#ifdef CONFIG_M5275
+	u8 cnt[4];		/* 0x0C Channel n Counter */
+	u16 res3;		/* 0x10 - 0x11 */
+	u8 per[4];		/* 0x14 Channel n Period */
+	u16 res4;		/* 0x16 - 0x17 */
+	u8 dty[4];		/* 0x18 Channel n Duty */
+#else
+	u8 cnt[8];		/* 0x0C Channel n Counter */
+	u8 per[8];		/* 0x14 Channel n Period */
+	u8 dty[8];		/* 0x1C Channel n Duty */
+	u8 sdn;			/* 0x24 Shutdown */
+	u8 res3[3];		/* 0x25 - 0x27 */
+#endif				/* CONFIG_M5275 */
+#endif				/* CONFIG_M5272 */
+} pwm_t;
+
+#ifdef CONFIG_M5272
+
+#define PWM_CR_EN			(0x80)
+#define PWM_CR_FRC1			(0x40)
+#define PWM_CR_LVL			(0x20)
+#define PWM_CR_CLKSEL(x)		((x) & 0x0F)
+#define PWM_CR_CLKSEL_MASK		(0xF0)
+
+#else
+
+#define PWM_EN_PWMEn(x)			(1 << ((x) & 0x07))
+#define PWM_EN_PWMEn_MASK		(0xF0)
+
+#define PWM_POL_PPOLn(x)		(1 << ((x) & 0x07))
+#define PWM_POL_PPOLn_MASK		(0xF0)
+
+#define PWM_CLK_PCLKn(x)		(1 << ((x) & 0x07))
+#define PWM_CLK_PCLKn_MASK		(0xF0)
+
+#define PWM_PRCLK_PCKB(x)		(((x) & 0x07) << 4)
+#define PWM_PRCLK_PCKB_MASK		(0x8F)
+#define PWM_PRCLK_PCKA(x)		((x) & 0x07)
+#define PWM_PRCLK_PCKA_MASK		(0xF8)
+
+#define PWM_CLK_PCLKn(x)		(1 << ((x) & 0x07))
+#define PWM_CLK_PCLKn_MASK		(0xF0)
+
+#define PWM_CTL_CON67			(0x80)
+#define PWM_CTL_CON45			(0x40)
+#define PWM_CTL_CON23			(0x20)
+#define PWM_CTL_CON01			(0x10)
+#define PWM_CTL_PSWAR			(0x08)
+#define PWM_CTL_PFRZ			(0x04)
+
+#define PWM_SDN_IF			(0x80)
+#define PWM_SDN_IE			(0x40)
+#define PWM_SDN_RESTART			(0x20)
+#define PWM_SDN_LVL			(0x10)
+#define PWM_SDN_PWM7IN			(0x04)
+#define PWM_SDN_PWM7IL			(0x02)
+#define PWM_SDN_SDNEN			(0x01)
+
+#endif				/* CONFIG_M5272 */
+
+#endif				/* __ATA_H__ */
diff --git a/include/asm-m68k/coldfire/qspi.h b/include/asm-m68k/coldfire/qspi.h
new file mode 100644
index 000000000..8bcd2e4db
--- /dev/null
+++ b/include/asm-m68k/coldfire/qspi.h
@@ -0,0 +1,111 @@
+/*
+ * Queue Serial Peripheral Interface Memory Map
+ *
+ * Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
+ * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __QSPI_H__
+#define __QSPI_H__
+
+/* QSPI module registers */
+typedef struct qspi_ctrl {
+	u16 mr;			/* 0x00 Mode */
+	u16 res1;
+	u16 dlyr;		/* 0x04 Delay */
+	u16 res2;
+	u16 wr;			/* 0x08 Wrap */
+	u16 res3;
+	u16 ir;			/* 0x0C Interrupt */
+	u16 res4;
+	u16 ar;			/* 0x10 Address */
+	u16 res5;
+	u16 dr;			/* 0x14 Data */
+	u16 res6;
+} qspi_t;
+
+/* MR */
+#define QSPI_QMR_MSTR			(0x8000)
+#define QSPI_QMR_DOHIE			(0x4000)
+#define QSPI_QMR_BITS(x)		(((x)&0x000F)<<10)
+#define QSPI_QMR_BITS_MASK		(0xC3FF)
+#define QSPI_QMR_BITS_8			(0x2000)
+#define QSPI_QMR_BITS_9			(0x2400)
+#define QSPI_QMR_BITS_10		(0x2800)
+#define QSPI_QMR_BITS_11		(0x2C00)
+#define QSPI_QMR_BITS_12		(0x3000)
+#define QSPI_QMR_BITS_13		(0x3400)
+#define QSPI_QMR_BITS_14		(0x3800)
+#define QSPI_QMR_BITS_15		(0x3C00)
+#define QSPI_QMR_BITS_16		(0x0000)
+#define QSPI_QMR_CPOL			(0x0200)
+#define QSPI_QMR_CPHA			(0x0100)
+#define QSPI_QMR_BAUD(x)		((x)&0x00FF)
+#define QSPI_QMR_BAUD_MASK		(0xFF00)
+
+/* DLYR */
+#define QSPI_QDLYR_SPE			(0x8000)
+#define QSPI_QDLYR_QCD(x)		(((x)&0x007F)<<8)
+#define QSPI_QDLYR_QCD_MASK		(0x80FF)
+#define QSPI_QDLYR_DTL(x)		((x)&0x00FF)
+#define QSPI_QDLYR_DTL_MASK		(0xFF00)
+
+/* WR */
+#define QSPI_QWR_HALT			(0x8000)
+#define QSPI_QWR_WREN			(0x4000)
+#define QSPI_QWR_WRTO			(0x2000)
+#define QSPI_QWR_CSIV			(0x1000)
+#define QSPI_QWR_ENDQP(x)		(((x)&0x000F)<<8)
+#define QSPI_QWR_ENDQP_MASK		(0xF0FF)
+#define QSPI_QWR_CPTQP(x)		(((x)&0x000F)<<4)
+#define QSPI_QWR_CPTQP_MASK		(0xFF0F)
+#define QSPI_QWR_NEWQP(x)		((x)&0x000F)
+#define QSPI_QWR_NEWQP_MASK		(0xFFF0)
+
+/* IR */
+#define QSPI_QIR_WCEFB			(0x8000)
+#define QSPI_QIR_ABRTB			(0x4000)
+#define QSPI_QIR_ABRTL			(0x1000)
+#define QSPI_QIR_WCEFE			(0x0800)
+#define QSPI_QIR_ABRTE			(0x0400)
+#define QSPI_QIR_SPIFE			(0x0100)
+#define QSPI_QIR_WCEF			(0x0008)
+#define QSPI_QIR_ABRT			(0x0004)
+#define QSPI_QIR_SPIF			(0x0001)
+
+/* AR */
+#define QSPI_QAR_ADDR(x)		((x)&0x003F)
+#define QSPI_QAR_ADDR_MASK		(0xFFC0)
+#define QSPI_QAR_TRANS			(0x0000)
+#define QSPI_QAR_RECV			(0x0010)
+#define QSPI_QAR_CMD			(0x0020)
+
+/* DR */
+#define QSPI_QDR_CONT			(0x8000)
+#define QSPI_QDR_BITSE			(0x4000)
+#define QSPI_QDR_DT			(0x2000)
+#define QSPI_QDR_DSCK			(0x1000)
+#define QSPI_QDR_QSPI_CS3		(0x0800)
+#define QSPI_QDR_QSPI_CS2		(0x0400)
+#define QSPI_QDR_QSPI_CS1		(0x0200)
+#define QSPI_QDR_QSPI_CS0		(0x0100)
+
+#endif				/* __QSPI_H__ */
diff --git a/include/asm-m68k/coldfire/rng.h b/include/asm-m68k/coldfire/rng.h
new file mode 100644
index 000000000..1eefc56bd
--- /dev/null
+++ b/include/asm-m68k/coldfire/rng.h
@@ -0,0 +1,52 @@
+/*
+ * RNG Memory Map
+ *
+ * Copyright (C) 2004-2008 Freescale Semiconductor, Inc.
+ * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __RNG_H__
+#define __RNG_H__
+
+/* Random Number Generator */
+typedef struct rng_ctrl {
+	u32 cr;			/* 0x00 Control */
+	u32 sr;			/* 0x04 Status */
+	u32 er;			/* 0x08 Entropy */
+	u32 out;		/* 0x0C Output FIFO */
+} rng_t;
+
+#define RNG_CR_SLM		(0x00000010)	/* Sleep mode - 5445x */
+#define RNG_CR_CI		(0x00000008)	/* Clear interrupt */
+#define RNG_CR_IM		(0x00000004)	/* Interrupt mask */
+#define RNG_CR_HA		(0x00000002)	/* High assurance */
+#define RNG_CR_GO		(0x00000001)	/* Go bit */
+
+#define RNG_SR_OFS(x)		(((x) & 0x000000FF) << 16)
+#define RNG_SR_OFS_MASK		(0xFF00FFFF)
+#define RNG_SR_OFL(x)		(((x) & 0x000000FF) << 8)
+#define RNG_SR_OFL_MASK		(0xFFFF00FF)
+#define RNG_SR_EI		(0x00000008)
+#define RNG_SR_FUF		(0x00000004)
+#define RNG_SR_LRS		(0x00000002)
+#define RNG_SR_SV		(0x00000001)
+
+#endif				/* __RNG_H__ */
diff --git a/include/asm-m68k/coldfire/skha.h b/include/asm-m68k/coldfire/skha.h
new file mode 100644
index 000000000..bd6b5af04
--- /dev/null
+++ b/include/asm-m68k/coldfire/skha.h
@@ -0,0 +1,121 @@
+/*
+ * Symmetric Key Hardware Accelerator Memory Map
+ *
+ * Copyright (C) 2004-2008 Freescale Semiconductor, Inc.
+ * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __SKHA_H__
+#define __SKHA_H__
+
+typedef struct skha_ctrl {
+	u32 mr;			/* 0x00 Mode */
+	u32 cr;			/* 0x04 Control */
+	u32 cmr;		/* 0x08 Command */
+	u32 sr;			/* 0x0C Status */
+	u32 esr;		/* 0x10 Error Status */
+	u32 emr;		/* 0x14 Error Status Mask Register) */
+	u32 ksr;		/* 0x18 Key Size */
+	u32 dsr;		/* 0x1C Data Size */
+	u32 in;			/* 0x20 Input FIFO */
+	u32 out;		/* 0x24 Output FIFO */
+	u32 res1[2];		/* 0x28 - 0x2F */
+	u32 kdr1;		/* 0x30 Key Data 1  */
+	u32 kdr2;		/* 0x34 Key Data 2 */
+	u32 kdr3;		/* 0x38 Key Data 3 */
+	u32 kdr4;		/* 0x3C Key Data 4 */
+	u32 kdr5;		/* 0x40 Key Data 5 */
+	u32 kdr6;		/* 0x44 Key Data 6 */
+	u32 res2[10];		/* 0x48 - 0x6F */
+	u32 c1;			/* 0x70 Context 1 */
+	u32 c2;			/* 0x74 Context 2 */
+	u32 c3;			/* 0x78 Context 3 */
+	u32 c4;			/* 0x7C Context 4 */
+	u32 c5;			/* 0x80 Context 5 */
+	u32 c6;			/* 0x84 Context 6 */
+	u32 c7;			/* 0x88 Context 7 */
+	u32 c8;			/* 0x8C Context 8 */
+	u32 c9;			/* 0x90 Context 9 */
+	u32 c10;		/* 0x94 Context 10 */
+	u32 c11;		/* 0x98 Context 11 */
+	u32 c12;		/* 0x9C Context 12 - 5235, 5271, 5272 */
+} skha_t;
+
+#ifdef CONFIG_MCF532x
+#define	SKHA_MODE_CTRM(x)	(((x) & 0x0F) << 9)
+#define	SKHA_MODE_CTRM_MASK	(0xFFFFE1FF)
+#define	SKHA_MODE_DKP		(0x00000100)
+#else
+#define	SKHA_MODE_CTRM(x)	(((x) & 0x0F) << 8)
+#define	SKHA_MODE_CTRM_MASK	(0xFFFFF0FF)
+#define	SKHA_MODE_DKP		(0x00000080)
+#endif
+#define	SKHA_MODE_CM(x)		(((x) & 0x03) << 3)
+#define	SKHA_MODE_CM_MASK	(0xFFFFFFE7)
+#define	SKHA_MODE_DIR		(0x00000004)
+#define	SKHA_MODE_ALG(x)	((x) & 0x03)
+#define	SKHA_MODE_ALG_MASK	(0xFFFFFFFC)
+
+#define SHKA_CR_ODMAL(x)	(((x) & 0x3F) << 24)
+#define SHKA_CR_ODMAL_MASK	(0xC0FFFFFF)
+#define SHKA_CR_IDMAL(x)	(((x) & 0x3F) << 16)
+#define SHKA_CR_IDMAL_MASK	(0xFFC0FFFF)
+#define SHKA_CR_END		(0x00000008)
+#define SHKA_CR_ODMA		(0x00000004)
+#define SHKA_CR_IDMA		(0x00000002)
+#define	SKHA_CR_IE		(0x00000001)
+
+#define	SKHA_CMR_GO		(0x00000008)
+#define	SKHA_CMR_CI		(0x00000004)
+#define	SKHA_CMR_RI		(0x00000002)
+#define	SKHA_CMR_SWR		(0x00000001)
+
+#define SKHA_SR_OFL(x)		(((x) & 0xFF) << 24)
+#define SKHA_SR_OFL_MASK	(0x00FFFFFF)
+#define SKHA_SR_IFL(x)		(((x) & 0xFF) << 16)
+#define SKHA_SR_IFL_MASK	(0xFF00FFFF)
+#define SKHA_SR_AESES(x)	(((x) & 0x1F) << 11)
+#define SKHA_SR_AESES_MASK	(0xFFFF07FF)
+#define SKHA_SR_DESES(x)	(((x) & 0x7) << 8)
+#define SKHA_SR_DESES_MASK	(0xFFFFF8FF)
+#define SKHA_SR_BUSY		(0x00000010)
+#define SKHA_SR_RD		(0x00000008)
+#define SKHA_SR_ERR		(0x00000004)
+#define SKHA_SR_DONE		(0x00000002)
+#define SKHA_SR_INT		(0x00000001)
+
+#define SHKA_ESE_DRL		(0x00000800)
+#define	SKHA_ESR_KRE		(0x00000400)
+#define	SKHA_ESR_KPE		(0x00000200)
+#define	SKHA_ESR_ERE		(0x00000100)
+#define	SKHA_ESR_RMDP		(0x00000080)
+#define	SKHA_ESR_KSE		(0x00000040)
+#define	SKHA_ESR_DSE		(0x00000020)
+#define	SKHA_ESR_IME		(0x00000010)
+#define	SKHA_ESR_NEOF		(0x00000008)
+#define	SKHA_ESR_NEIF		(0x00000004)
+#define	SKHA_ESR_OFU		(0x00000002)
+#define	SKHA_ESR_IFO		(0x00000001)
+
+#define	SKHA_KSR_SZ(x)		((x) & 0x3F)
+#define	SKHA_KSR_SZ_MASK	(0xFFFFFFC0)
+
+#endif				/* __SKHA_H__ */
diff --git a/include/asm-m68k/coldfire/ssi.h b/include/asm-m68k/coldfire/ssi.h
index 105c4751d..b3dfbfab6 100644
--- a/include/asm-m68k/coldfire/ssi.h
+++ b/include/asm-m68k/coldfire/ssi.h
@@ -26,10 +26,6 @@
 #ifndef __SSI_H__
 #define __SSI_H__
 
-/*********************************************************************
-* Synchronous Serial Interface (SSI)
-*********************************************************************/
-
 typedef struct ssi {
 	u32 tx0;
 	u32 tx1;
@@ -52,14 +48,10 @@ typedef struct ssi {
 	u32 rmask;
 } ssi_t;
 
-/*********************************************************************
-* Synchronous Serial Interface (SSI)
-*********************************************************************/
-
-/* Bit definitions and macros for SSI_CR */
 #define SSI_CR_CIS			(0x00000200)
 #define SSI_CR_TCH			(0x00000100)
 #define SSI_CR_MCE			(0x00000080)
+#define SSI_CR_I2S_MASK			(0xFFFFFF9F)
 #define SSI_CR_I2S_SLAVE		(0x00000040)
 #define SSI_CR_I2S_MASTER		(0x00000020)
 #define SSI_CR_I2S_NORMAL		(0x00000000)
@@ -69,7 +61,6 @@ typedef struct ssi {
 #define SSI_CR_TE			(0x00000002)
 #define SSI_CR_SSI_EN			(0x00000001)
 
-/* Bit definitions and macros for SSI_ISR */
 #define SSI_ISR_CMDAU			(0x00040000)
 #define SSI_ISR_CMDDU			(0x00020000)
 #define SSI_ISR_RXT			(0x00010000)
@@ -90,7 +81,6 @@ typedef struct ssi {
 #define SSI_ISR_TFE1			(0x00000002)
 #define SSI_ISR_TFE0			(0x00000001)
 
-/* Bit definitions and macros for SSI_IER */
 #define SSI_IER_RDMAE			(0x00400000)
 #define SSI_IER_RIE			(0x00200000)
 #define SSI_IER_TDMAE			(0x00100000)
@@ -115,7 +105,6 @@ typedef struct ssi {
 #define SSI_IER_TFE1			(0x00000002)
 #define SSI_IER_TFE0			(0x00000001)
 
-/* Bit definitions and macros for SSI_TCR */
 #define SSI_TCR_TXBIT0			(0x00000200)
 #define SSI_TCR_TFEN1			(0x00000100)
 #define SSI_TCR_TFEN0			(0x00000080)
@@ -127,7 +116,6 @@ typedef struct ssi {
 #define SSI_TCR_TFSL			(0x00000002)
 #define SSI_TCR_TEFS			(0x00000001)
 
-/* Bit definitions and macros for SSI_RCR */
 #define SSI_RCR_RXEXT			(0x00000400)
 #define SSI_RCR_RXBIT0			(0x00000200)
 #define SSI_RCR_RFEN1			(0x00000100)
@@ -138,38 +126,44 @@ typedef struct ssi {
 #define SSI_RCR_RFSL			(0x00000002)
 #define SSI_RCR_REFS			(0x00000001)
 
-/* Bit definitions and macros for SSI_CCR */
 #define SSI_CCR_DIV2			(0x00040000)
 #define SSI_CCR_PSR			(0x00020000)
-#define SSI_CCR_WL(x)			(((x)&0x0000000F)<<13)
-#define SSI_CCR_DC(x)			(((x)&0x0000001F)<<8)
-#define SSI_CCR_PM(x)			((x)&0x000000FF)
-
-/* Bit definitions and macros for SSI_FCSR */
-#define SSI_FCSR_RFCNT1(x)		(((x)&0x0000000F)<<28)
-#define SSI_FCSR_TFCNT1(x)		(((x)&0x0000000F)<<24)
-#define SSI_FCSR_RFWM1(x)		(((x)&0x0000000F)<<20)
-#define SSI_FCSR_TFWM1(x)		(((x)&0x0000000F)<<16)
-#define SSI_FCSR_RFCNT0(x)		(((x)&0x0000000F)<<12)
-#define SSI_FCSR_TFCNT0(x)		(((x)&0x0000000F)<<8)
-#define SSI_FCSR_RFWM0(x)		(((x)&0x0000000F)<<4)
-#define SSI_FCSR_TFWM0(x)		((x)&0x0000000F)
-
-/* Bit definitions and macros for SSI_ACR */
-#define SSI_ACR_FRDIV(x)		(((x)&0x0000003F)<<5)
+#define SSI_CCR_WL(x)			(((x) & 0x0F) << 13)
+#define SSI_CCR_WL_MASK			(0xFFFE1FFF)
+#define SSI_CCR_DC(x)			(((x)& 0x1F) << 8)
+#define SSI_CCR_DC_MASK			(0xFFFFE0FF)
+#define SSI_CCR_PM(x)			((x) & 0xFF)
+#define SSI_CCR_PM_MASK			(0xFFFFFF00)
+
+#define SSI_FCSR_RFCNT1(x)		(((x) & 0x0F) << 28)
+#define SSI_FCSR_RFCNT1_MASK		(0x0FFFFFFF)
+#define SSI_FCSR_TFCNT1(x)		(((x) & 0x0F) << 24)
+#define SSI_FCSR_TFCNT1_MASK		(0xF0FFFFFF)
+#define SSI_FCSR_RFWM1(x)		(((x) & 0x0F) << 20)
+#define SSI_FCSR_RFWM1_MASK		(0xFF0FFFFF)
+#define SSI_FCSR_TFWM1(x)		(((x) & 0x0F) << 16)
+#define SSI_FCSR_TFWM1_MASK		(0xFFF0FFFF)
+#define SSI_FCSR_RFCNT0(x)		(((x) & 0x0F) << 12)
+#define SSI_FCSR_RFCNT0_MASK		(0xFFFF0FFF)
+#define SSI_FCSR_TFCNT0(x)		(((x) & 0x0F) << 8)
+#define SSI_FCSR_TFCNT0_MASK		(0xFFFFF0FF)
+#define SSI_FCSR_RFWM0(x)		(((x) & 0x0F) << 4)
+#define SSI_FCSR_RFWM0_MASK		(0xFFFFFF0F)
+#define SSI_FCSR_TFWM0(x)		((x) & 0x0F)
+#define SSI_FCSR_TFWM0_MASK		(0xFFFFFFF0)
+
+#define SSI_ACR_FRDIV(x)		(((x) & 0x3F) << 5)
+#define SSI_ACR_FRDIV_MASK		(0xFFFFF81F)
 #define SSI_ACR_WR			(0x00000010)
 #define SSI_ACR_RD			(0x00000008)
 #define SSI_ACR_TIF			(0x00000004)
 #define SSI_ACR_FV			(0x00000002)
 #define SSI_ACR_AC97EN			(0x00000001)
 
-/* Bit definitions and macros for SSI_ACADD */
-#define SSI_ACADD_SSI_ACADD(x)		((x)&0x0007FFFF)
+#define SSI_ACADD_SSI_ACADD(x)		((x) & 0x0007FFFF)
 
-/* Bit definitions and macros for SSI_ACDAT */
-#define SSI_ACDAT_SSI_ACDAT(x)		((x)&0x0007FFFF)
+#define SSI_ACDAT_SSI_ACDAT(x)		((x) & 0x0007FFFF)
 
-/* Bit definitions and macros for SSI_ATAG */
-#define SSI_ATAG_DDI_ATAG(x)		((x)&0x0000FFFF)
+#define SSI_ATAG_DDI_ATAG(x)		((x) & 0x0000FFFF)
 
 #endif					/* __SSI_H__ */
diff --git a/include/asm-m68k/fec.h b/include/asm-m68k/fec.h
index e63959902..49311e596 100644
--- a/include/asm-m68k/fec.h
+++ b/include/asm-m68k/fec.h
@@ -351,4 +351,16 @@ typedef struct fec {
 #define	FEC_RESET_DELAY			100
 #define FEC_RX_TOUT			100
 
+int fecpin_setclear(struct eth_device *dev, int setclear);
+
+#ifdef CONFIG_SYS_DISCOVER_PHY
+void __mii_init(void);
+uint mii_send(uint mii_cmd);
+int mii_discover_phy(struct eth_device *dev);
+int mcffec_miiphy_read(char *devname, unsigned char addr,
+		       unsigned char reg, unsigned short *value);
+int mcffec_miiphy_write(char *devname, unsigned char addr,
+			unsigned char reg, unsigned short value);
+#endif
+
 #endif				/* fec_h */
diff --git a/include/asm-m68k/fsl_mcdmafec.h b/include/asm-m68k/fsl_mcdmafec.h
index 82da5931e..7e540567a 100644
--- a/include/asm-m68k/fsl_mcdmafec.h
+++ b/include/asm-m68k/fsl_mcdmafec.h
@@ -164,13 +164,4 @@ struct fec_info_dma {
 #define FIFO_CTRL_UFMASK	(0x00100000)
 #define FIFO_CTRL_OFMASK	(0x00080000)
 
-int fecpin_setclear(struct eth_device *dev, int setclear);
-void mii_init(void);
-uint mii_send(uint mii_cmd);
-int mii_discover_phy(struct eth_device *dev);
-int mcffec_miiphy_read(char *devname, unsigned char addr,
-		       unsigned char reg, unsigned short *value);
-int mcffec_miiphy_write(char *devname, unsigned char addr,
-			unsigned char reg, unsigned short value);
-
 #endif				/* fsl_mcdmafec_h */
diff --git a/include/asm-m68k/global_data.h b/include/asm-m68k/global_data.h
index 10c693153..413c20002 100644
--- a/include/asm-m68k/global_data.h
+++ b/include/asm-m68k/global_data.h
@@ -30,7 +30,7 @@
  * global variables during system initialization (until we have set
  * up the memory controller so that we can use RAM).
  *
- * Keep it *SMALL* and remember to set CFG_GBL_DATA_SIZE > sizeof(gd_t)
+ * Keep it *SMALL* and remember to set CONFIG_SYS_GBL_DATA_SIZE > sizeof(gd_t)
  */
 
 typedef	struct	global_data {
@@ -75,6 +75,7 @@ typedef	struct	global_data {
 #define	GD_FLG_POSTFAIL	0x00008		/* Critical POST test failed		*/
 #define	GD_FLG_POSTSTOP	0x00010		/* POST seqeunce aborted		*/
 #define	GD_FLG_LOGINIT	0x00020		/* Log Buffer has been initialized	*/
+#define GD_FLG_DISABLE_CONSOLE	0x00040		/* Disable console (in & out)	 */
 
 #if 0
 extern gd_t *global_data;
diff --git a/include/asm-m68k/immap.h b/include/asm-m68k/immap.h
index b0814f160..93f730f6d 100644
--- a/include/asm-m68k/immap.h
+++ b/include/asm-m68k/immap.h
@@ -30,84 +30,84 @@
 #include <asm/immap_5227x.h>
 #include <asm/m5227x.h>
 
-#define CFG_UART_BASE		(MMAP_UART0 + (CFG_UART_PORT * 0x4000))
+#define CONFIG_SYS_UART_BASE		(MMAP_UART0 + (CONFIG_SYS_UART_PORT * 0x4000))
 
-#define CFG_MCFRTC_BASE		(MMAP_RTC)
+#define CONFIG_SYS_MCFRTC_BASE		(MMAP_RTC)
 
 #ifdef CONFIG_LCD
-#define	CFG_LCD_BASE		(MMAP_LCD)
+#define	CONFIG_SYS_LCD_BASE		(MMAP_LCD)
 #endif
 
 /* Timer */
 #ifdef CONFIG_MCFTMR
-#define CFG_UDELAY_BASE		(MMAP_DTMR0)
-#define CFG_TMR_BASE		(MMAP_DTMR1)
-#define CFG_TMRPND_REG		(((volatile int0_t *)(CFG_INTR_BASE))->iprh0)
-#define CFG_TMRINTR_NO		(INT0_HI_DTMR1)
-#define CFG_TMRINTR_MASK	(INTC_IPRH_INT33)
-#define CFG_TMRINTR_PEND	(CFG_TMRINTR_MASK)
-#define CFG_TMRINTR_PRI		(6)
-#define CFG_TIMER_PRESCALER	(((gd->bus_clk / 1000000) - 1) << 8)
+#define CONFIG_SYS_UDELAY_BASE		(MMAP_DTMR0)
+#define CONFIG_SYS_TMR_BASE		(MMAP_DTMR1)
+#define CONFIG_SYS_TMRPND_REG		(((volatile int0_t *)(CONFIG_SYS_INTR_BASE))->iprh0)
+#define CONFIG_SYS_TMRINTR_NO		(INT0_HI_DTMR1)
+#define CONFIG_SYS_TMRINTR_MASK	(INTC_IPRH_INT33)
+#define CONFIG_SYS_TMRINTR_PEND	(CONFIG_SYS_TMRINTR_MASK)
+#define CONFIG_SYS_TMRINTR_PRI		(6)
+#define CONFIG_SYS_TIMER_PRESCALER	(((gd->bus_clk / 1000000) - 1) << 8)
 #endif
 
 #ifdef CONFIG_MCFPIT
-#define CFG_UDELAY_BASE		(MMAP_PIT0)
-#define CFG_PIT_BASE		(MMAP_PIT1)
-#define CFG_PIT_PRESCALE	(6)
+#define CONFIG_SYS_UDELAY_BASE		(MMAP_PIT0)
+#define CONFIG_SYS_PIT_BASE		(MMAP_PIT1)
+#define CONFIG_SYS_PIT_PRESCALE	(6)
 #endif
 
-#define CFG_INTR_BASE		(MMAP_INTC0)
-#define CFG_NUM_IRQS		(128)
+#define CONFIG_SYS_INTR_BASE		(MMAP_INTC0)
+#define CONFIG_SYS_NUM_IRQS		(128)
 #endif				/* CONFIG_M52277 */
 
 #ifdef CONFIG_M5235
 #include <asm/immap_5235.h>
 #include <asm/m5235.h>
 
-#define CFG_FEC0_IOBASE		(MMAP_FEC)
-#define CFG_UART_BASE		(MMAP_UART0 + (CFG_UART_PORT * 0x40))
+#define CONFIG_SYS_FEC0_IOBASE		(MMAP_FEC)
+#define CONFIG_SYS_UART_BASE		(MMAP_UART0 + (CONFIG_SYS_UART_PORT * 0x40))
 
 /* Timer */
 #ifdef CONFIG_MCFTMR
-#define CFG_UDELAY_BASE		(MMAP_DTMR0)
-#define CFG_TMR_BASE		(MMAP_DTMR3)
-#define CFG_TMRPND_REG		(((volatile int0_t *)(CFG_INTR_BASE))->iprl0)
-#define CFG_TMRINTR_NO		(INT0_LO_DTMR3)
-#define CFG_TMRINTR_MASK	(INTC_IPRL_INT22)
-#define CFG_TMRINTR_PEND	(CFG_TMRINTR_MASK)
-#define CFG_TMRINTR_PRI		(0x1E)		/* Level must include inorder to work */
-#define CFG_TIMER_PRESCALER	(((gd->bus_clk / 1000000) - 1) << 8)
+#define CONFIG_SYS_UDELAY_BASE		(MMAP_DTMR0)
+#define CONFIG_SYS_TMR_BASE		(MMAP_DTMR3)
+#define CONFIG_SYS_TMRPND_REG		(((volatile int0_t *)(CONFIG_SYS_INTR_BASE))->iprl0)
+#define CONFIG_SYS_TMRINTR_NO		(INT0_LO_DTMR3)
+#define CONFIG_SYS_TMRINTR_MASK	(INTC_IPRL_INT22)
+#define CONFIG_SYS_TMRINTR_PEND	(CONFIG_SYS_TMRINTR_MASK)
+#define CONFIG_SYS_TMRINTR_PRI		(0x1E)		/* Level must include inorder to work */
+#define CONFIG_SYS_TIMER_PRESCALER	(((gd->bus_clk / 1000000) - 1) << 8)
 #endif
 
 #ifdef CONFIG_MCFPIT
-#define CFG_UDELAY_BASE		(MMAP_PIT0)
-#define CFG_PIT_BASE		(MMAP_PIT1)
-#define CFG_PIT_PRESCALE	(6)
+#define CONFIG_SYS_UDELAY_BASE		(MMAP_PIT0)
+#define CONFIG_SYS_PIT_BASE		(MMAP_PIT1)
+#define CONFIG_SYS_PIT_PRESCALE	(6)
 #endif
 
-#define CFG_INTR_BASE		(MMAP_INTC0)
-#define CFG_NUM_IRQS		(128)
+#define CONFIG_SYS_INTR_BASE		(MMAP_INTC0)
+#define CONFIG_SYS_NUM_IRQS		(128)
 #endif				/* CONFIG_M5235 */
 
 #ifdef CONFIG_M5249
 #include <asm/immap_5249.h>
 #include <asm/m5249.h>
 
-#define CFG_UART_BASE		(MMAP_UART0 + (CFG_UART_PORT * 0x40))
+#define CONFIG_SYS_UART_BASE		(MMAP_UART0 + (CONFIG_SYS_UART_PORT * 0x40))
 
-#define CFG_INTR_BASE		(MMAP_INTC)
-#define CFG_NUM_IRQS		(64)
+#define CONFIG_SYS_INTR_BASE		(MMAP_INTC)
+#define CONFIG_SYS_NUM_IRQS		(64)
 
 /* Timer */
 #ifdef CONFIG_MCFTMR
-#define CFG_UDELAY_BASE		(MMAP_DTMR0)
-#define CFG_TMR_BASE		(MMAP_DTMR1)
-#define CFG_TMRPND_REG		(mbar_readLong(MCFSIM_IPR))
-#define CFG_TMRINTR_NO		(31)
-#define CFG_TMRINTR_MASK	(0x00000400)
-#define CFG_TMRINTR_PEND	(CFG_TMRINTR_MASK)
-#define CFG_TMRINTR_PRI		(MCFSIM_ICR_AUTOVEC | MCFSIM_ICR_LEVEL7 | MCFSIM_ICR_PRI3)
-#define CFG_TIMER_PRESCALER	(((gd->bus_clk / 2000000) - 1) << 8)
+#define CONFIG_SYS_UDELAY_BASE		(MMAP_DTMR0)
+#define CONFIG_SYS_TMR_BASE		(MMAP_DTMR1)
+#define CONFIG_SYS_TMRPND_REG		(mbar_readLong(MCFSIM_IPR))
+#define CONFIG_SYS_TMRINTR_NO		(31)
+#define CONFIG_SYS_TMRINTR_MASK	(0x00000400)
+#define CONFIG_SYS_TMRINTR_PEND	(CONFIG_SYS_TMRINTR_MASK)
+#define CONFIG_SYS_TMRINTR_PRI		(MCFSIM_ICR_AUTOVEC | MCFSIM_ICR_LEVEL7 | MCFSIM_ICR_PRI3)
+#define CONFIG_SYS_TIMER_PRESCALER	(((gd->bus_clk / 2000000) - 1) << 8)
 #endif
 #endif				/* CONFIG_M5249 */
 
@@ -116,21 +116,21 @@
 #include <asm/m5249.h>
 #include <asm/m5253.h>
 
-#define CFG_UART_BASE		(MMAP_UART0 + (CFG_UART_PORT * 0x40))
+#define CONFIG_SYS_UART_BASE		(MMAP_UART0 + (CONFIG_SYS_UART_PORT * 0x40))
 
-#define CFG_INTR_BASE		(MMAP_INTC)
-#define CFG_NUM_IRQS		(64)
+#define CONFIG_SYS_INTR_BASE		(MMAP_INTC)
+#define CONFIG_SYS_NUM_IRQS		(64)
 
 /* Timer */
 #ifdef CONFIG_MCFTMR
-#define CFG_UDELAY_BASE		(MMAP_DTMR0)
-#define CFG_TMR_BASE		(MMAP_DTMR1)
-#define CFG_TMRPND_REG		(mbar_readLong(MCFSIM_IPR))
-#define CFG_TMRINTR_NO		(27)
-#define CFG_TMRINTR_MASK	(0x00000400)
-#define CFG_TMRINTR_PEND	(CFG_TMRINTR_MASK)
-#define CFG_TMRINTR_PRI		(MCFSIM_ICR_AUTOVEC | MCFSIM_ICR_LEVEL3 | MCFSIM_ICR_PRI3)
-#define CFG_TIMER_PRESCALER	(((gd->bus_clk / 2000000) - 1) << 8)
+#define CONFIG_SYS_UDELAY_BASE		(MMAP_DTMR0)
+#define CONFIG_SYS_TMR_BASE		(MMAP_DTMR1)
+#define CONFIG_SYS_TMRPND_REG		(mbar_readLong(MCFSIM_IPR))
+#define CONFIG_SYS_TMRINTR_NO		(27)
+#define CONFIG_SYS_TMRINTR_MASK	(0x00000400)
+#define CONFIG_SYS_TMRINTR_PEND	(CONFIG_SYS_TMRINTR_MASK)
+#define CONFIG_SYS_TMRINTR_PRI		(MCFSIM_ICR_AUTOVEC | MCFSIM_ICR_LEVEL3 | MCFSIM_ICR_PRI3)
+#define CONFIG_SYS_TIMER_PRESCALER	(((gd->bus_clk / 2000000) - 1) << 8)
 #endif
 #endif				/* CONFIG_M5253 */
 
@@ -138,45 +138,45 @@
 #include <asm/immap_5271.h>
 #include <asm/m5271.h>
 
-#define CFG_FEC0_IOBASE		(MMAP_FEC)
-#define CFG_UART_BASE		(MMAP_UART0 + (CFG_UART_PORT * 0x40))
+#define CONFIG_SYS_FEC0_IOBASE		(MMAP_FEC)
+#define CONFIG_SYS_UART_BASE		(MMAP_UART0 + (CONFIG_SYS_UART_PORT * 0x40))
 
 /* Timer */
 #ifdef CONFIG_MCFTMR
-#define CFG_UDELAY_BASE		(MMAP_DTMR0)
-#define CFG_TMR_BASE		(MMAP_DTMR3)
-#define CFG_TMRPND_REG		(((volatile int0_t *)(CFG_INTR_BASE))->iprl0)
-#define CFG_TMRINTR_NO		(INT0_LO_DTMR3)
-#define CFG_TMRINTR_MASK	(INTC_IPRL_INT22)
-#define CFG_TMRINTR_PEND	(CFG_TMRINTR_MASK)
-#define CFG_TMRINTR_PRI		(0)		/* Level must include inorder to work */
-#define CFG_TIMER_PRESCALER	(((gd->bus_clk / 1000000) - 1) << 8)
+#define CONFIG_SYS_UDELAY_BASE		(MMAP_DTMR0)
+#define CONFIG_SYS_TMR_BASE		(MMAP_DTMR3)
+#define CONFIG_SYS_TMRPND_REG		(((volatile int0_t *)(CONFIG_SYS_INTR_BASE))->iprl0)
+#define CONFIG_SYS_TMRINTR_NO		(INT0_LO_DTMR3)
+#define CONFIG_SYS_TMRINTR_MASK	(INTC_IPRL_INT22)
+#define CONFIG_SYS_TMRINTR_PEND	(CONFIG_SYS_TMRINTR_MASK)
+#define CONFIG_SYS_TMRINTR_PRI		(0)		/* Level must include inorder to work */
+#define CONFIG_SYS_TIMER_PRESCALER	(((gd->bus_clk / 1000000) - 1) << 8)
 #endif
 
-#define CFG_INTR_BASE		(MMAP_INTC0)
-#define CFG_NUM_IRQS		(128)
+#define CONFIG_SYS_INTR_BASE		(MMAP_INTC0)
+#define CONFIG_SYS_NUM_IRQS		(128)
 #endif				/* CONFIG_M5271 */
 
 #ifdef CONFIG_M5272
 #include <asm/immap_5272.h>
 #include <asm/m5272.h>
 
-#define CFG_FEC0_IOBASE		(MMAP_FEC)
-#define CFG_UART_BASE		(MMAP_UART0 + (CFG_UART_PORT * 0x40))
+#define CONFIG_SYS_FEC0_IOBASE		(MMAP_FEC)
+#define CONFIG_SYS_UART_BASE		(MMAP_UART0 + (CONFIG_SYS_UART_PORT * 0x40))
 
-#define CFG_INTR_BASE		(MMAP_INTC)
-#define CFG_NUM_IRQS		(64)
+#define CONFIG_SYS_INTR_BASE		(MMAP_INTC)
+#define CONFIG_SYS_NUM_IRQS		(64)
 
 /* Timer */
 #ifdef CONFIG_MCFTMR
-#define CFG_UDELAY_BASE		(MMAP_TMR0)
-#define CFG_TMR_BASE		(MMAP_TMR3)
-#define CFG_TMRPND_REG		(((volatile intctrl_t *)(CFG_INTR_BASE))->int_isr)
-#define CFG_TMRINTR_NO		(INT_TMR3)
-#define CFG_TMRINTR_MASK	(INT_ISR_INT24)
-#define CFG_TMRINTR_PEND	(0)
-#define CFG_TMRINTR_PRI		(INT_ICR1_TMR3PI | INT_ICR1_TMR3IPL(5))
-#define CFG_TIMER_PRESCALER	(((gd->bus_clk / 1000000) - 1) << 8)
+#define CONFIG_SYS_UDELAY_BASE		(MMAP_TMR0)
+#define CONFIG_SYS_TMR_BASE		(MMAP_TMR3)
+#define CONFIG_SYS_TMRPND_REG		(((volatile intctrl_t *)(CONFIG_SYS_INTR_BASE))->int_isr)
+#define CONFIG_SYS_TMRINTR_NO		(INT_TMR3)
+#define CONFIG_SYS_TMRINTR_MASK	(INT_ISR_INT24)
+#define CONFIG_SYS_TMRINTR_PEND	(0)
+#define CONFIG_SYS_TMRINTR_PRI		(INT_ICR1_TMR3PI | INT_ICR1_TMR3IPL(5))
+#define CONFIG_SYS_TIMER_PRESCALER	(((gd->bus_clk / 1000000) - 1) << 8)
 #endif
 #endif				/* CONFIG_M5272 */
 
@@ -184,23 +184,23 @@
 #include <asm/immap_5275.h>
 #include <asm/m5275.h>
 
-#define CFG_FEC0_IOBASE		(MMAP_FEC0)
-#define CFG_FEC1_IOBASE		(MMAP_FEC1)
-#define CFG_UART_BASE		(MMAP_UART0 + (CFG_UART_PORT * 0x40))
+#define CONFIG_SYS_FEC0_IOBASE		(MMAP_FEC0)
+#define CONFIG_SYS_FEC1_IOBASE		(MMAP_FEC1)
+#define CONFIG_SYS_UART_BASE		(MMAP_UART0 + (CONFIG_SYS_UART_PORT * 0x40))
 
-#define CFG_INTR_BASE		(MMAP_INTC0)
-#define CFG_NUM_IRQS		(192)
+#define CONFIG_SYS_INTR_BASE		(MMAP_INTC0)
+#define CONFIG_SYS_NUM_IRQS		(192)
 
 /* Timer */
 #ifdef CONFIG_MCFTMR
-#define CFG_UDELAY_BASE		(MMAP_DTMR0)
-#define CFG_TMR_BASE		(MMAP_DTMR3)
-#define CFG_TMRPND_REG		(((volatile int0_t *)(CFG_INTR_BASE))->iprl0)
-#define CFG_TMRINTR_NO		(INT0_LO_DTMR3)
-#define CFG_TMRINTR_MASK	(INTC_IPRL_INT22)
-#define CFG_TMRINTR_PEND	(CFG_TMRINTR_MASK)
-#define CFG_TMRINTR_PRI		(0x1E)
-#define CFG_TIMER_PRESCALER	(((gd->bus_clk / 1000000) - 1) << 8)
+#define CONFIG_SYS_UDELAY_BASE		(MMAP_DTMR0)
+#define CONFIG_SYS_TMR_BASE		(MMAP_DTMR3)
+#define CONFIG_SYS_TMRPND_REG		(((volatile int0_t *)(CONFIG_SYS_INTR_BASE))->iprl0)
+#define CONFIG_SYS_TMRINTR_NO		(INT0_LO_DTMR3)
+#define CONFIG_SYS_TMRINTR_MASK	(INTC_IPRL_INT22)
+#define CONFIG_SYS_TMRINTR_PEND	(CONFIG_SYS_TMRINTR_MASK)
+#define CONFIG_SYS_TMRINTR_PRI		(0x1E)
+#define CONFIG_SYS_TIMER_PRESCALER	(((gd->bus_clk / 1000000) - 1) << 8)
 #endif
 #endif				/* CONFIG_M5275 */
 
@@ -208,94 +208,126 @@
 #include <asm/immap_5282.h>
 #include <asm/m5282.h>
 
-#define CFG_FEC0_IOBASE		(MMAP_FEC)
-#define CFG_UART_BASE		(MMAP_UART0 + (CFG_UART_PORT * 0x40))
+#define CONFIG_SYS_FEC0_IOBASE		(MMAP_FEC)
+#define CONFIG_SYS_UART_BASE		(MMAP_UART0 + (CONFIG_SYS_UART_PORT * 0x40))
 
-#define CFG_INTR_BASE		(MMAP_INTC0)
-#define CFG_NUM_IRQS		(128)
+#define CONFIG_SYS_INTR_BASE		(MMAP_INTC0)
+#define CONFIG_SYS_NUM_IRQS		(128)
 
 /* Timer */
 #ifdef CONFIG_MCFTMR
-#define CFG_UDELAY_BASE		(MMAP_DTMR0)
-#define CFG_TMR_BASE		(MMAP_DTMR3)
-#define CFG_TMRPND_REG		(((volatile int0_t *)(CFG_INTR_BASE))->iprl0)
-#define CFG_TMRINTR_NO		(INT0_LO_DTMR3)
-#define CFG_TMRINTR_MASK	(1 << INT0_LO_DTMR3)
-#define CFG_TMRINTR_PEND	(CFG_TMRINTR_MASK)
-#define CFG_TMRINTR_PRI		(0x1E)		/* Level must include inorder to work */
-#define CFG_TIMER_PRESCALER	(((gd->bus_clk / 1000000) - 1) << 8)
+#define CONFIG_SYS_UDELAY_BASE		(MMAP_DTMR0)
+#define CONFIG_SYS_TMR_BASE		(MMAP_DTMR3)
+#define CONFIG_SYS_TMRPND_REG		(((volatile int0_t *)(CONFIG_SYS_INTR_BASE))->iprl0)
+#define CONFIG_SYS_TMRINTR_NO		(INT0_LO_DTMR3)
+#define CONFIG_SYS_TMRINTR_MASK	(1 << INT0_LO_DTMR3)
+#define CONFIG_SYS_TMRINTR_PEND	(CONFIG_SYS_TMRINTR_MASK)
+#define CONFIG_SYS_TMRINTR_PRI		(0x1E)		/* Level must include inorder to work */
+#define CONFIG_SYS_TIMER_PRESCALER	(((gd->bus_clk / 1000000) - 1) << 8)
 #endif
 #endif				/* CONFIG_M5282 */
 
+#if defined(CONFIG_MCF5301x)
+#include <asm/immap_5301x.h>
+#include <asm/m5301x.h>
+
+#define CONFIG_SYS_FEC0_IOBASE		(MMAP_FEC0)
+#define CONFIG_SYS_FEC1_IOBASE		(MMAP_FEC1)
+#define CONFIG_SYS_UART_BASE		(MMAP_UART0 + (CONFIG_SYS_UART_PORT * 0x4000))
+
+#define CONFIG_SYS_MCFRTC_BASE		(MMAP_RTC)
+
+/* Timer */
+#ifdef CONFIG_MCFTMR
+#define CONFIG_SYS_UDELAY_BASE		(MMAP_DTMR0)
+#define CONFIG_SYS_TMR_BASE		(MMAP_DTMR1)
+#define CONFIG_SYS_TMRPND_REG		(((volatile int0_t *)(CONFIG_SYS_INTR_BASE))->iprh0)
+#define CONFIG_SYS_TMRINTR_NO		(INT0_HI_DTMR1)
+#define CONFIG_SYS_TMRINTR_MASK		(INTC_IPRH_INT33)
+#define CONFIG_SYS_TMRINTR_PEND		(CONFIG_SYS_TMRINTR_MASK)
+#define CONFIG_SYS_TMRINTR_PRI		(6)
+#define CONFIG_SYS_TIMER_PRESCALER	(((gd->bus_clk / 1000000) - 1) << 8)
+#endif
+
+#ifdef CONFIG_MCFPIT
+#define CONFIG_SYS_UDELAY_BASE		(MMAP_PIT0)
+#define CONFIG_SYS_PIT_BASE		(MMAP_PIT1)
+#define CONFIG_SYS_PIT_PRESCALE	(6)
+#endif
+
+#define CONFIG_SYS_INTR_BASE		(MMAP_INTC0)
+#define CONFIG_SYS_NUM_IRQS		(128)
+#endif				/* CONFIG_M5301x */
+
 #if defined(CONFIG_M5329) || defined(CONFIG_M5373)
 #include <asm/immap_5329.h>
 #include <asm/m5329.h>
 
-#define CFG_FEC0_IOBASE		(MMAP_FEC)
-#define CFG_UART_BASE		(MMAP_UART0 + (CFG_UART_PORT * 0x4000))
-#define CFG_MCFRTC_BASE		(MMAP_RTC)
+#define CONFIG_SYS_FEC0_IOBASE		(MMAP_FEC)
+#define CONFIG_SYS_UART_BASE		(MMAP_UART0 + (CONFIG_SYS_UART_PORT * 0x4000))
+#define CONFIG_SYS_MCFRTC_BASE		(MMAP_RTC)
 
 /* Timer */
 #ifdef CONFIG_MCFTMR
-#define CFG_UDELAY_BASE		(MMAP_DTMR0)
-#define CFG_TMR_BASE		(MMAP_DTMR1)
-#define CFG_TMRPND_REG		(((volatile int0_t *)(CFG_INTR_BASE))->iprh0)
-#define CFG_TMRINTR_NO		(INT0_HI_DTMR1)
-#define CFG_TMRINTR_MASK	(INTC_IPRH_INT33)
-#define CFG_TMRINTR_PEND	(CFG_TMRINTR_MASK)
-#define CFG_TMRINTR_PRI		(6)
-#define CFG_TIMER_PRESCALER	(((gd->bus_clk / 1000000) - 1) << 8)
+#define CONFIG_SYS_UDELAY_BASE		(MMAP_DTMR0)
+#define CONFIG_SYS_TMR_BASE		(MMAP_DTMR1)
+#define CONFIG_SYS_TMRPND_REG		(((volatile int0_t *)(CONFIG_SYS_INTR_BASE))->iprh0)
+#define CONFIG_SYS_TMRINTR_NO		(INT0_HI_DTMR1)
+#define CONFIG_SYS_TMRINTR_MASK	(INTC_IPRH_INT33)
+#define CONFIG_SYS_TMRINTR_PEND	(CONFIG_SYS_TMRINTR_MASK)
+#define CONFIG_SYS_TMRINTR_PRI		(6)
+#define CONFIG_SYS_TIMER_PRESCALER	(((gd->bus_clk / 1000000) - 1) << 8)
 #endif
 
 #ifdef CONFIG_MCFPIT
-#define CFG_UDELAY_BASE		(MMAP_PIT0)
-#define CFG_PIT_BASE		(MMAP_PIT1)
-#define CFG_PIT_PRESCALE	(6)
+#define CONFIG_SYS_UDELAY_BASE		(MMAP_PIT0)
+#define CONFIG_SYS_PIT_BASE		(MMAP_PIT1)
+#define CONFIG_SYS_PIT_PRESCALE	(6)
 #endif
 
-#define CFG_INTR_BASE		(MMAP_INTC0)
-#define CFG_NUM_IRQS		(128)
+#define CONFIG_SYS_INTR_BASE		(MMAP_INTC0)
+#define CONFIG_SYS_NUM_IRQS		(128)
 #endif				/* CONFIG_M5329 && CONFIG_M5373 */
 
 #if defined(CONFIG_M54451) || defined(CONFIG_M54455)
 #include <asm/immap_5445x.h>
 #include <asm/m5445x.h>
 
-#define CFG_FEC0_IOBASE		(MMAP_FEC0)
+#define CONFIG_SYS_FEC0_IOBASE		(MMAP_FEC0)
 #if defined(CONFIG_M54455EVB)
-#define CFG_FEC1_IOBASE		(MMAP_FEC1)
+#define CONFIG_SYS_FEC1_IOBASE		(MMAP_FEC1)
 #endif
 
-#define CFG_UART_BASE		(MMAP_UART0 + (CFG_UART_PORT * 0x4000))
+#define CONFIG_SYS_UART_BASE		(MMAP_UART0 + (CONFIG_SYS_UART_PORT * 0x4000))
 
-#define CFG_MCFRTC_BASE		(MMAP_RTC)
+#define CONFIG_SYS_MCFRTC_BASE		(MMAP_RTC)
 
 /* Timer */
 #ifdef CONFIG_MCFTMR
-#define CFG_UDELAY_BASE		(MMAP_DTMR0)
-#define CFG_TMR_BASE		(MMAP_DTMR1)
-#define CFG_TMRPND_REG		(((volatile int0_t *)(CFG_INTR_BASE))->iprh0)
-#define CFG_TMRINTR_NO		(INT0_HI_DTMR1)
-#define CFG_TMRINTR_MASK	(INTC_IPRH_INT33)
-#define CFG_TMRINTR_PEND	(CFG_TMRINTR_MASK)
-#define CFG_TMRINTR_PRI		(6)
-#define CFG_TIMER_PRESCALER	(((gd->bus_clk / 1000000) - 1) << 8)
+#define CONFIG_SYS_UDELAY_BASE		(MMAP_DTMR0)
+#define CONFIG_SYS_TMR_BASE		(MMAP_DTMR1)
+#define CONFIG_SYS_TMRPND_REG		(((volatile int0_t *)(CONFIG_SYS_INTR_BASE))->iprh0)
+#define CONFIG_SYS_TMRINTR_NO		(INT0_HI_DTMR1)
+#define CONFIG_SYS_TMRINTR_MASK	(INTC_IPRH_INT33)
+#define CONFIG_SYS_TMRINTR_PEND	(CONFIG_SYS_TMRINTR_MASK)
+#define CONFIG_SYS_TMRINTR_PRI		(6)
+#define CONFIG_SYS_TIMER_PRESCALER	(((gd->bus_clk / 1000000) - 1) << 8)
 #endif
 
 #ifdef CONFIG_MCFPIT
-#define CFG_UDELAY_BASE		(MMAP_PIT0)
-#define CFG_PIT_BASE		(MMAP_PIT1)
-#define CFG_PIT_PRESCALE	(6)
+#define CONFIG_SYS_UDELAY_BASE		(MMAP_PIT0)
+#define CONFIG_SYS_PIT_BASE		(MMAP_PIT1)
+#define CONFIG_SYS_PIT_PRESCALE	(6)
 #endif
 
-#define CFG_INTR_BASE		(MMAP_INTC0)
-#define CFG_NUM_IRQS		(128)
+#define CONFIG_SYS_INTR_BASE		(MMAP_INTC0)
+#define CONFIG_SYS_NUM_IRQS		(128)
 
 #ifdef CONFIG_PCI
-#define CFG_PCI_BAR0		(CFG_MBAR)
-#define CFG_PCI_BAR5		(CFG_SDRAM_BASE)
-#define CFG_PCI_TBATR0		(CFG_MBAR)
-#define CFG_PCI_TBATR5		(CFG_SDRAM_BASE)
+#define CONFIG_SYS_PCI_BAR0		(CONFIG_SYS_MBAR)
+#define CONFIG_SYS_PCI_BAR5		(CONFIG_SYS_SDRAM_BASE)
+#define CONFIG_SYS_PCI_TBATR0		(CONFIG_SYS_MBAR)
+#define CONFIG_SYS_PCI_TBATR5		(CONFIG_SYS_SDRAM_BASE)
 #endif
 #endif				/* CONFIG_M54451 || CONFIG_M54455 */
 
@@ -304,8 +336,8 @@
 #include <asm/m547x_8x.h>
 
 #ifdef CONFIG_FSLDMAFEC
-#define CFG_FEC0_IOBASE		(MMAP_FEC0)
-#define CFG_FEC1_IOBASE		(MMAP_FEC1)
+#define CONFIG_SYS_FEC0_IOBASE		(MMAP_FEC0)
+#define CONFIG_SYS_FEC1_IOBASE		(MMAP_FEC1)
 
 #define FEC0_RX_TASK		0
 #define FEC0_TX_TASK		1
@@ -321,27 +353,27 @@
 #define FEC1_TX_INIT		31
 #endif
 
-#define CFG_UART_BASE		(MMAP_UART0 + (CFG_UART_PORT * 0x100))
+#define CONFIG_SYS_UART_BASE		(MMAP_UART0 + (CONFIG_SYS_UART_PORT * 0x100))
 
 #ifdef CONFIG_SLTTMR
-#define CFG_UDELAY_BASE		(MMAP_SLT1)
-#define CFG_TMR_BASE		(MMAP_SLT0)
-#define CFG_TMRPND_REG		(((volatile int0_t *)(CFG_INTR_BASE))->iprh0)
-#define CFG_TMRINTR_NO		(INT0_HI_SLT0)
-#define CFG_TMRINTR_MASK	(INTC_IPRH_INT54)
-#define CFG_TMRINTR_PEND	(CFG_TMRINTR_MASK)
-#define CFG_TMRINTR_PRI		(0x1E)
-#define CFG_TIMER_PRESCALER	(gd->bus_clk / 1000000)
+#define CONFIG_SYS_UDELAY_BASE		(MMAP_SLT1)
+#define CONFIG_SYS_TMR_BASE		(MMAP_SLT0)
+#define CONFIG_SYS_TMRPND_REG		(((volatile int0_t *)(CONFIG_SYS_INTR_BASE))->iprh0)
+#define CONFIG_SYS_TMRINTR_NO		(INT0_HI_SLT0)
+#define CONFIG_SYS_TMRINTR_MASK	(INTC_IPRH_INT54)
+#define CONFIG_SYS_TMRINTR_PEND	(CONFIG_SYS_TMRINTR_MASK)
+#define CONFIG_SYS_TMRINTR_PRI		(0x1E)
+#define CONFIG_SYS_TIMER_PRESCALER	(gd->bus_clk / 1000000)
 #endif
 
-#define CFG_INTR_BASE		(MMAP_INTC0)
-#define CFG_NUM_IRQS		(128)
+#define CONFIG_SYS_INTR_BASE		(MMAP_INTC0)
+#define CONFIG_SYS_NUM_IRQS		(128)
 
 #ifdef CONFIG_PCI
-#define CFG_PCI_BAR0		(0x40000000)
-#define CFG_PCI_BAR1		(CFG_SDRAM_BASE)
-#define CFG_PCI_TBATR0		(CFG_MBAR)
-#define CFG_PCI_TBATR1		(CFG_SDRAM_BASE)
+#define CONFIG_SYS_PCI_BAR0		(0x40000000)
+#define CONFIG_SYS_PCI_BAR1		(CONFIG_SYS_SDRAM_BASE)
+#define CONFIG_SYS_PCI_TBATR0		(CONFIG_SYS_MBAR)
+#define CONFIG_SYS_PCI_TBATR1		(CONFIG_SYS_SDRAM_BASE)
 #endif
 #endif				/* CONFIG_M547x */
 
@@ -350,8 +382,8 @@
 #include <asm/m547x_8x.h>
 
 #ifdef CONFIG_FSLDMAFEC
-#define CFG_FEC0_IOBASE		(MMAP_FEC0)
-#define CFG_FEC1_IOBASE		(MMAP_FEC1)
+#define CONFIG_SYS_FEC0_IOBASE		(MMAP_FEC0)
+#define CONFIG_SYS_FEC1_IOBASE		(MMAP_FEC1)
 
 #define FEC0_RX_TASK		0
 #define FEC0_TX_TASK		1
@@ -367,28 +399,28 @@
 #define FEC1_TX_INIT		31
 #endif
 
-#define CFG_UART_BASE		(MMAP_UART0 + (CFG_UART_PORT * 0x100))
+#define CONFIG_SYS_UART_BASE		(MMAP_UART0 + (CONFIG_SYS_UART_PORT * 0x100))
 
 /* Timer */
 #ifdef CONFIG_SLTTMR
-#define CFG_UDELAY_BASE		(MMAP_SLT1)
-#define CFG_TMR_BASE		(MMAP_SLT0)
-#define CFG_TMRPND_REG		(((volatile int0_t *)(CFG_INTR_BASE))->iprh0)
-#define CFG_TMRINTR_NO		(INT0_HI_SLT0)
-#define CFG_TMRINTR_MASK	(INTC_IPRH_INT54)
-#define CFG_TMRINTR_PEND	(CFG_TMRINTR_MASK)
-#define CFG_TMRINTR_PRI		(0x1E)
-#define CFG_TIMER_PRESCALER	(gd->bus_clk / 1000000)
+#define CONFIG_SYS_UDELAY_BASE		(MMAP_SLT1)
+#define CONFIG_SYS_TMR_BASE		(MMAP_SLT0)
+#define CONFIG_SYS_TMRPND_REG		(((volatile int0_t *)(CONFIG_SYS_INTR_BASE))->iprh0)
+#define CONFIG_SYS_TMRINTR_NO		(INT0_HI_SLT0)
+#define CONFIG_SYS_TMRINTR_MASK	(INTC_IPRH_INT54)
+#define CONFIG_SYS_TMRINTR_PEND	(CONFIG_SYS_TMRINTR_MASK)
+#define CONFIG_SYS_TMRINTR_PRI		(0x1E)
+#define CONFIG_SYS_TIMER_PRESCALER	(gd->bus_clk / 1000000)
 #endif
 
-#define CFG_INTR_BASE		(MMAP_INTC0)
-#define CFG_NUM_IRQS		(128)
+#define CONFIG_SYS_INTR_BASE		(MMAP_INTC0)
+#define CONFIG_SYS_NUM_IRQS		(128)
 
 #ifdef CONFIG_PCI
-#define CFG_PCI_BAR0		(CFG_MBAR)
-#define CFG_PCI_BAR1		(CFG_SDRAM_BASE)
-#define CFG_PCI_TBATR0		(CFG_MBAR)
-#define CFG_PCI_TBATR1		(CFG_SDRAM_BASE)
+#define CONFIG_SYS_PCI_BAR0		(CONFIG_SYS_MBAR)
+#define CONFIG_SYS_PCI_BAR1		(CONFIG_SYS_SDRAM_BASE)
+#define CONFIG_SYS_PCI_TBATR0		(CONFIG_SYS_MBAR)
+#define CONFIG_SYS_PCI_TBATR1		(CONFIG_SYS_SDRAM_BASE)
 #endif
 #endif				/* CONFIG_M548x */
 
diff --git a/include/asm-m68k/immap_5227x.h b/include/asm-m68k/immap_5227x.h
index 1d1e6f1b0..6f65f5030 100644
--- a/include/asm-m68k/immap_5227x.h
+++ b/include/asm-m68k/immap_5227x.h
@@ -27,151 +27,56 @@
 #define __IMMAP_5227X__
 
 /* Module Base Addresses */
-#define MMAP_SCM1	(CFG_MBAR + 0x00000000)
-#define MMAP_XBS	(CFG_MBAR + 0x00004000)
-#define MMAP_FBCS	(CFG_MBAR + 0x00008000)
-#define MMAP_CAN	(CFG_MBAR + 0x00020000)
-#define MMAP_RTC	(CFG_MBAR + 0x0003C000)
-#define MMAP_SCM2	(CFG_MBAR + 0x00040010)
-#define MMAP_SCM3	(CFG_MBAR + 0x00040070)
-#define MMAP_EDMA	(CFG_MBAR + 0x00044000)
-#define MMAP_INTC0	(CFG_MBAR + 0x00048000)
-#define MMAP_INTC1	(CFG_MBAR + 0x0004C000)
-#define MMAP_IACK	(CFG_MBAR + 0x00054000)
-#define MMAP_I2C	(CFG_MBAR + 0x00058000)
-#define MMAP_DSPI	(CFG_MBAR + 0x0005C000)
-#define MMAP_UART0	(CFG_MBAR + 0x00060000)
-#define MMAP_UART1	(CFG_MBAR + 0x00064000)
-#define MMAP_UART2	(CFG_MBAR + 0x00068000)
-#define MMAP_DTMR0	(CFG_MBAR + 0x00070000)
-#define MMAP_DTMR1	(CFG_MBAR + 0x00074000)
-#define MMAP_DTMR2	(CFG_MBAR + 0x00078000)
-#define MMAP_DTMR3	(CFG_MBAR + 0x0007C000)
-#define MMAP_PIT0	(CFG_MBAR + 0x00080000)
-#define MMAP_PIT1	(CFG_MBAR + 0x00084000)
-#define MMAP_PWM	(CFG_MBAR + 0x00090000)
-#define MMAP_EPORT	(CFG_MBAR + 0x00094000)
-#define MMAP_RCM	(CFG_MBAR + 0x000A0000)
-#define MMAP_CCM	(CFG_MBAR + 0x000A0004)
-#define MMAP_GPIO	(CFG_MBAR + 0x000A4000)
-#define MMAP_ADC	(CFG_MBAR + 0x000A8000)
-#define MMAP_LCD	(CFG_MBAR + 0x000AC000)
-#define MMAP_LCD_BGLUT	(CFG_MBAR + 0x000AC800)
-#define MMAP_LCD_GWLUT	(CFG_MBAR + 0x000ACC00)
-#define MMAP_USBHW	(CFG_MBAR + 0x000B0000)
-#define MMAP_USBCAPS	(CFG_MBAR + 0x000B0100)
-#define MMAP_USBEHCI	(CFG_MBAR + 0x000B0140)
-#define MMAP_USBOTG	(CFG_MBAR + 0x000B01A0)
-#define MMAP_SDRAM	(CFG_MBAR + 0x000B8000)
-#define MMAP_SSI	(CFG_MBAR + 0x000BC000)
-#define MMAP_PLL	(CFG_MBAR + 0x000C0000)
+#define MMAP_SCM1	(CONFIG_SYS_MBAR + 0x00000000)
+#define MMAP_XBS	(CONFIG_SYS_MBAR + 0x00004000)
+#define MMAP_FBCS	(CONFIG_SYS_MBAR + 0x00008000)
+#define MMAP_CAN	(CONFIG_SYS_MBAR + 0x00020000)
+#define MMAP_RTC	(CONFIG_SYS_MBAR + 0x0003C000)
+#define MMAP_SCM2	(CONFIG_SYS_MBAR + 0x00040010)
+#define MMAP_SCM3	(CONFIG_SYS_MBAR + 0x00040070)
+#define MMAP_EDMA	(CONFIG_SYS_MBAR + 0x00044000)
+#define MMAP_INTC0	(CONFIG_SYS_MBAR + 0x00048000)
+#define MMAP_INTC1	(CONFIG_SYS_MBAR + 0x0004C000)
+#define MMAP_IACK	(CONFIG_SYS_MBAR + 0x00054000)
+#define MMAP_I2C	(CONFIG_SYS_MBAR + 0x00058000)
+#define MMAP_DSPI	(CONFIG_SYS_MBAR + 0x0005C000)
+#define MMAP_UART0	(CONFIG_SYS_MBAR + 0x00060000)
+#define MMAP_UART1	(CONFIG_SYS_MBAR + 0x00064000)
+#define MMAP_UART2	(CONFIG_SYS_MBAR + 0x00068000)
+#define MMAP_DTMR0	(CONFIG_SYS_MBAR + 0x00070000)
+#define MMAP_DTMR1	(CONFIG_SYS_MBAR + 0x00074000)
+#define MMAP_DTMR2	(CONFIG_SYS_MBAR + 0x00078000)
+#define MMAP_DTMR3	(CONFIG_SYS_MBAR + 0x0007C000)
+#define MMAP_PIT0	(CONFIG_SYS_MBAR + 0x00080000)
+#define MMAP_PIT1	(CONFIG_SYS_MBAR + 0x00084000)
+#define MMAP_PWM	(CONFIG_SYS_MBAR + 0x00090000)
+#define MMAP_EPORT	(CONFIG_SYS_MBAR + 0x00094000)
+#define MMAP_RCM	(CONFIG_SYS_MBAR + 0x000A0000)
+#define MMAP_CCM	(CONFIG_SYS_MBAR + 0x000A0004)
+#define MMAP_GPIO	(CONFIG_SYS_MBAR + 0x000A4000)
+#define MMAP_ADC	(CONFIG_SYS_MBAR + 0x000A8000)
+#define MMAP_LCD	(CONFIG_SYS_MBAR + 0x000AC000)
+#define MMAP_LCD_BGLUT	(CONFIG_SYS_MBAR + 0x000AC800)
+#define MMAP_LCD_GWLUT	(CONFIG_SYS_MBAR + 0x000ACC00)
+#define MMAP_USBHW	(CONFIG_SYS_MBAR + 0x000B0000)
+#define MMAP_USBCAPS	(CONFIG_SYS_MBAR + 0x000B0100)
+#define MMAP_USBEHCI	(CONFIG_SYS_MBAR + 0x000B0140)
+#define MMAP_USBOTG	(CONFIG_SYS_MBAR + 0x000B01A0)
+#define MMAP_SDRAM	(CONFIG_SYS_MBAR + 0x000B8000)
+#define MMAP_SSI	(CONFIG_SYS_MBAR + 0x000BC000)
+#define MMAP_PLL	(CONFIG_SYS_MBAR + 0x000C0000)
 
 #include <asm/coldfire/crossbar.h>
 #include <asm/coldfire/dspi.h>
 #include <asm/coldfire/edma.h>
+#include <asm/coldfire/eport.h>
 #include <asm/coldfire/flexbus.h>
+#include <asm/coldfire/flexcan.h>
+#include <asm/coldfire/intctrl.h>
 #include <asm/coldfire/lcd.h>
+#include <asm/coldfire/pwm.h>
 #include <asm/coldfire/ssi.h>
 
-/* Interrupt Controller (INTC) */
-typedef struct int0_ctrl {
-	u32 iprh0;		/* 0x00 Pending Register High */
-	u32 iprl0;		/* 0x04 Pending Register Low */
-	u32 imrh0;		/* 0x08 Mask Register High */
-	u32 imrl0;		/* 0x0C Mask Register Low */
-	u32 frch0;		/* 0x10 Force Register High */
-	u32 frcl0;		/* 0x14 Force Register Low */
-	u16 res1;		/* 0x18 - 0x19 */
-	u16 icfg0;		/* 0x1A Configuration Register */
-	u8 simr0;		/* 0x1C Set Interrupt Mask */
-	u8 cimr0;		/* 0x1D Clear Interrupt Mask */
-	u8 clmask0;		/* 0x1E Current Level Mask */
-	u8 slmask;		/* 0x1F Saved Level Mask */
-	u32 res2[8];		/* 0x20 - 0x3F */
-	u8 icr0[64];		/* 0x40 - 0x7F Control registers */
-	u32 res3[24];		/* 0x80 - 0xDF */
-	u8 swiack0;		/* 0xE0 Software Interrupt ack */
-	u8 res4[3];		/* 0xE1 - 0xE3 */
-	u8 Lniack0_1;		/* 0xE4 Level n interrupt ack */
-	u8 res5[3];		/* 0xE5 - 0xE7 */
-	u8 Lniack0_2;		/* 0xE8 Level n interrupt ack */
-	u8 res6[3];		/* 0xE9 - 0xEB */
-	u8 Lniack0_3;		/* 0xEC Level n interrupt ack */
-	u8 res7[3];		/* 0xED - 0xEF */
-	u8 Lniack0_4;		/* 0xF0 Level n interrupt ack */
-	u8 res8[3];		/* 0xF1 - 0xF3 */
-	u8 Lniack0_5;		/* 0xF4 Level n interrupt ack */
-	u8 res9[3];		/* 0xF5 - 0xF7 */
-	u8 Lniack0_6;		/* 0xF8 Level n interrupt ack */
-	u8 resa[3];		/* 0xF9 - 0xFB */
-	u8 Lniack0_7;		/* 0xFC Level n interrupt ack */
-	u8 resb[3];		/* 0xFD - 0xFF */
-} int0_t;
-
-typedef struct int1_ctrl {
-	/* Interrupt Controller 1 */
-	u32 iprh1;		/* 0x00 Pending Register High */
-	u32 iprl1;		/* 0x04 Pending Register Low */
-	u32 imrh1;		/* 0x08 Mask Register High */
-	u32 imrl1;		/* 0x0C Mask Register Low */
-	u32 frch1;		/* 0x10 Force Register High */
-	u32 frcl1;		/* 0x14 Force Register Low */
-	u16 res1;		/* 0x18 */
-	u16 icfg1;		/* 0x1A Configuration Register */
-	u8 simr1;		/* 0x1C Set Interrupt Mask */
-	u8 cimr1;		/* 0x1D Clear Interrupt Mask */
-	u16 res2;		/* 0x1E - 0x1F */
-	u32 res3[8];		/* 0x20 - 0x3F */
-	u8 icr1[64];		/* 0x40 - 0x7F */
-	u32 res4[24];		/* 0x80 - 0xDF */
-	u8 swiack1;		/* 0xE0 Software Interrupt ack */
-	u8 res5[3];		/* 0xE1 - 0xE3 */
-	u8 Lniack1_1;		/* 0xE4 Level n interrupt ack */
-	u8 res6[3];		/* 0xE5 - 0xE7 */
-	u8 Lniack1_2;		/* 0xE8 Level n interrupt ack */
-	u8 res7[3];		/* 0xE9 - 0xEB */
-	u8 Lniack1_3;		/* 0xEC Level n interrupt ack */
-	u8 res8[3];		/* 0xED - 0xEF */
-	u8 Lniack1_4;		/* 0xF0 Level n interrupt ack */
-	u8 res9[3];		/* 0xF1 - 0xF3 */
-	u8 Lniack1_5;		/* 0xF4 Level n interrupt ack */
-	u8 resa[3];		/* 0xF5 - 0xF7 */
-	u8 Lniack1_6;		/* 0xF8 Level n interrupt ack */
-	u8 resb[3];		/* 0xF9 - 0xFB */
-	u8 Lniack1_7;		/* 0xFC Level n interrupt ack */
-	u8 resc[3];		/* 0xFD - 0xFF */
-} int1_t;
-
-/* Global Interrupt Acknowledge (IACK) */
-typedef struct iack {
-	u8 resv0[0xE0];
-	u8 gswiack;
-	u8 resv1[0x3];
-	u8 gl1iack;
-	u8 resv2[0x3];
-	u8 gl2iack;
-	u8 resv3[0x3];
-	u8 gl3iack;
-	u8 resv4[0x3];
-	u8 gl4iack;
-	u8 resv5[0x3];
-	u8 gl5iack;
-	u8 resv6[0x3];
-	u8 gl6iack;
-	u8 resv7[0x3];
-	u8 gl7iack;
-} iack_t;
-
-/* Edge Port Module (EPORT) */
-typedef struct eport {
-	u16 eppar;
-	u8 epddr;
-	u8 epier;
-	u8 epdr;
-	u8 eppdr;
-	u8 epfr;
-} eport_t;
-
 /* Reset Controller Module (RCM) */
 typedef struct rcm {
 	u8 rcr;
@@ -193,6 +98,12 @@ typedef struct ccm {
 	u16 sbfcr;		/* Serial Boot Control */
 } ccm_t;
 
+typedef struct canex_ctrl {
+	can_msg_t msg[16];	/* 0x00 Message Buffer 0-15 */
+	u32 res0[0x700];	/* 0x100 */
+	can_msg_t rxim[16];	/* 0x800 Rx Individual Mask 0-15 */
+} canex_t;
+
 /* General Purpose I/O Module (GPIO) */
 typedef struct gpio {
 	/* Port Output Data Registers */
diff --git a/include/asm-m68k/immap_5235.h b/include/asm-m68k/immap_5235.h
index 4a034501d..f7f35fcb9 100644
--- a/include/asm-m68k/immap_5235.h
+++ b/include/asm-m68k/immap_5235.h
@@ -26,42 +26,51 @@
 #ifndef __IMMAP_5235__
 #define __IMMAP_5235__
 
-#define MMAP_SCM	(CFG_MBAR + 0x00000000)
-#define MMAP_SDRAM	(CFG_MBAR + 0x00000040)
-#define MMAP_FBCS	(CFG_MBAR + 0x00000080)
-#define MMAP_DMA0	(CFG_MBAR + 0x00000100)
-#define MMAP_DMA1	(CFG_MBAR + 0x00000110)
-#define MMAP_DMA2	(CFG_MBAR + 0x00000120)
-#define MMAP_DMA3	(CFG_MBAR + 0x00000130)
-#define MMAP_UART0	(CFG_MBAR + 0x00000200)
-#define MMAP_UART1	(CFG_MBAR + 0x00000240)
-#define MMAP_UART2	(CFG_MBAR + 0x00000280)
-#define MMAP_I2C	(CFG_MBAR + 0x00000300)
-#define MMAP_QSPI	(CFG_MBAR + 0x00000340)
-#define MMAP_DTMR0	(CFG_MBAR + 0x00000400)
-#define MMAP_DTMR1	(CFG_MBAR + 0x00000440)
-#define MMAP_DTMR2	(CFG_MBAR + 0x00000480)
-#define MMAP_DTMR3	(CFG_MBAR + 0x000004C0)
-#define MMAP_INTC0	(CFG_MBAR + 0x00000C00)
-#define MMAP_INTC1	(CFG_MBAR + 0x00000D00)
-#define MMAP_INTCACK	(CFG_MBAR + 0x00000F00)
-#define MMAP_FEC	(CFG_MBAR + 0x00001000)
-#define MMAP_FECFIFO	(CFG_MBAR + 0x00001400)
-#define MMAP_GPIO	(CFG_MBAR + 0x00100000)
-#define MMAP_CCM	(CFG_MBAR + 0x00110000)
-#define MMAP_PLL	(CFG_MBAR + 0x00120000)
-#define MMAP_EPORT	(CFG_MBAR + 0x00130000)
-#define MMAP_WDOG	(CFG_MBAR + 0x00140000)
-#define MMAP_PIT0	(CFG_MBAR + 0x00150000)
-#define MMAP_PIT1	(CFG_MBAR + 0x00160000)
-#define MMAP_PIT2	(CFG_MBAR + 0x00170000)
-#define MMAP_PIT3	(CFG_MBAR + 0x00180000)
-#define MMAP_MDHA	(CFG_MBAR + 0x00190000)
-#define MMAP_RNG	(CFG_MBAR + 0x001A0000)
-#define MMAP_SKHA	(CFG_MBAR + 0x001B0000)
-#define MMAP_CAN1	(CFG_MBAR + 0x001C0000)
-#define MMAP_ETPU	(CFG_MBAR + 0x001D0000)
-#define MMAP_CAN2	(CFG_MBAR + 0x001F0000)
+#define MMAP_SCM	(CONFIG_SYS_MBAR + 0x00000000)
+#define MMAP_SDRAM	(CONFIG_SYS_MBAR + 0x00000040)
+#define MMAP_FBCS	(CONFIG_SYS_MBAR + 0x00000080)
+#define MMAP_DMA0	(CONFIG_SYS_MBAR + 0x00000100)
+#define MMAP_DMA1	(CONFIG_SYS_MBAR + 0x00000110)
+#define MMAP_DMA2	(CONFIG_SYS_MBAR + 0x00000120)
+#define MMAP_DMA3	(CONFIG_SYS_MBAR + 0x00000130)
+#define MMAP_UART0	(CONFIG_SYS_MBAR + 0x00000200)
+#define MMAP_UART1	(CONFIG_SYS_MBAR + 0x00000240)
+#define MMAP_UART2	(CONFIG_SYS_MBAR + 0x00000280)
+#define MMAP_I2C	(CONFIG_SYS_MBAR + 0x00000300)
+#define MMAP_QSPI	(CONFIG_SYS_MBAR + 0x00000340)
+#define MMAP_DTMR0	(CONFIG_SYS_MBAR + 0x00000400)
+#define MMAP_DTMR1	(CONFIG_SYS_MBAR + 0x00000440)
+#define MMAP_DTMR2	(CONFIG_SYS_MBAR + 0x00000480)
+#define MMAP_DTMR3	(CONFIG_SYS_MBAR + 0x000004C0)
+#define MMAP_INTC0	(CONFIG_SYS_MBAR + 0x00000C00)
+#define MMAP_INTC1	(CONFIG_SYS_MBAR + 0x00000D00)
+#define MMAP_INTCACK	(CONFIG_SYS_MBAR + 0x00000F00)
+#define MMAP_FEC	(CONFIG_SYS_MBAR + 0x00001000)
+#define MMAP_FECFIFO	(CONFIG_SYS_MBAR + 0x00001400)
+#define MMAP_GPIO	(CONFIG_SYS_MBAR + 0x00100000)
+#define MMAP_CCM	(CONFIG_SYS_MBAR + 0x00110000)
+#define MMAP_PLL	(CONFIG_SYS_MBAR + 0x00120000)
+#define MMAP_EPORT	(CONFIG_SYS_MBAR + 0x00130000)
+#define MMAP_WDOG	(CONFIG_SYS_MBAR + 0x00140000)
+#define MMAP_PIT0	(CONFIG_SYS_MBAR + 0x00150000)
+#define MMAP_PIT1	(CONFIG_SYS_MBAR + 0x00160000)
+#define MMAP_PIT2	(CONFIG_SYS_MBAR + 0x00170000)
+#define MMAP_PIT3	(CONFIG_SYS_MBAR + 0x00180000)
+#define MMAP_MDHA	(CONFIG_SYS_MBAR + 0x00190000)
+#define MMAP_RNG	(CONFIG_SYS_MBAR + 0x001A0000)
+#define MMAP_SKHA	(CONFIG_SYS_MBAR + 0x001B0000)
+#define MMAP_CAN1	(CONFIG_SYS_MBAR + 0x001C0000)
+#define MMAP_ETPU	(CONFIG_SYS_MBAR + 0x001D0000)
+#define MMAP_CAN2	(CONFIG_SYS_MBAR + 0x001F0000)
+
+#include <asm/coldfire/eport.h>
+#include <asm/coldfire/flexbus.h>
+#include <asm/coldfire/flexcan.h>
+#include <asm/coldfire/intctrl.h>
+#include <asm/coldfire/mdha.h>
+#include <asm/coldfire/qspi.h>
+#include <asm/coldfire/rng.h>
+#include <asm/coldfire/skha.h>
 
 /* System Control Module register */
 typedef struct scm_ctrl {
@@ -104,141 +113,9 @@ typedef struct sdram_ctrl {
 	u32 dmr1;		/* 0x14 mask register block 1 */
 } sdram_t;
 
-/* Flexbus module Chip select registers */
-typedef struct fbcs_ctrl {
-	u16 csar0;		/* 0x00 Chip-Select Address Register 0 */
-	u16 res0;
-	u32 csmr0;		/* 0x04 Chip-Select Mask Register 0 */
-	u16 res1;		/* 0x08 */
-	u16 cscr0;		/* 0x0A Chip-Select Control Register 0 */
-
-	u16 csar1;		/* 0x0C Chip-Select Address Register 1 */
-	u16 res2;
-	u32 csmr1;		/* 0x10 Chip-Select Mask Register 1 */
-	u16 res3;		/* 0x14 */
-	u16 cscr1;		/* 0x16 Chip-Select Control Register 1 */
-
-	u16 csar2;		/* 0x18 Chip-Select Address Register 2 */
-	u16 res4;
-	u32 csmr2;		/* 0x1C Chip-Select Mask Register 2 */
-	u16 res5;		/* 0x20 */
-	u16 cscr2;		/* 0x22 Chip-Select Control Register 2 */
-
-	u16 csar3;		/* 0x24 Chip-Select Address Register 3 */
-	u16 res6;
-	u32 csmr3;		/* 0x28 Chip-Select Mask Register 3 */
-	u16 res7;		/* 0x2C */
-	u16 cscr3;		/* 0x2E Chip-Select Control Register 3 */
-
-	u16 csar4;		/* 0x30 Chip-Select Address Register 4 */
-	u16 res8;
-	u32 csmr4;		/* 0x34 Chip-Select Mask Register 4 */
-	u16 res9;		/* 0x38 */
-	u16 cscr4;		/* 0x3A Chip-Select Control Register 4 */
-
-	u16 csar5;		/* 0x3C Chip-Select Address Register 5 */
-	u16 res10;
-	u32 csmr5;		/* 0x40 Chip-Select Mask Register 5 */
-	u16 res11;		/* 0x44 */
-	u16 cscr5;		/* 0x46 Chip-Select Control Register 5 */
-
-	u16 csar6;		/* 0x48 Chip-Select Address Register 5 */
-	u16 res12;
-	u32 csmr6;		/* 0x4C Chip-Select Mask Register 5 */
-	u16 res13;		/* 0x50 */
-	u16 cscr6;		/* 0x52 Chip-Select Control Register 5 */
-
-	u16 csar7;		/* 0x54 Chip-Select Address Register 5 */
-	u16 res14;
-	u32 csmr7;		/* 0x58 Chip-Select Mask Register 5 */
-	u16 res15;		/* 0x5C */
-	u16 cscr7;		/* 0x5E Chip-Select Control Register 5 */
-} fbcs_t;
-
-/* QSPI module registers */
-typedef struct qspi_ctrl {
-	u16 qmr;		/* Mode register */
-	u16 res1;
-	u16 qdlyr;		/* Delay register */
-	u16 res2;
-	u16 qwr;		/* Wrap register */
-	u16 res3;
-	u16 qir;		/* Interrupt register */
-	u16 res4;
-	u16 qar;		/* Address register */
-	u16 res5;
-	u16 qdr;		/* Data register */
-	u16 res6;
-} qspi_t;
-
-/* Interrupt module registers */
-typedef struct int0_ctrl {
-	/* Interrupt Controller 0 */
-	u32 iprh0;		/* 0x00 Pending Register High */
-	u32 iprl0;		/* 0x04 Pending Register Low */
-	u32 imrh0;		/* 0x08 Mask Register High */
-	u32 imrl0;		/* 0x0C Mask Register Low */
-	u32 frch0;		/* 0x10 Force Register High */
-	u32 frcl0;		/* 0x14 Force Register Low */
-	u8 irlr;		/* 0x18 */
-	u8 iacklpr;		/* 0x19 */
-	u16 res1[19];		/* 0x1a - 0x3c */
-	u8 icr0[64];		/* 0x40 - 0x7F Control registers */
-	u32 res3[24];		/* 0x80 - 0xDF */
-	u8 swiack0;		/* 0xE0 Software Interrupt Acknowledge */
-	u8 res4[3];		/* 0xE1 - 0xE3 */
-	u8 Lniack0_1;		/* 0xE4 Level n interrupt acknowledge resister */
-	u8 res5[3];		/* 0xE5 - 0xE7 */
-	u8 Lniack0_2;		/* 0xE8 Level n interrupt acknowledge resister */
-	u8 res6[3];		/* 0xE9 - 0xEB */
-	u8 Lniack0_3;		/* 0xEC Level n interrupt acknowledge resister */
-	u8 res7[3];		/* 0xED - 0xEF */
-	u8 Lniack0_4;		/* 0xF0 Level n interrupt acknowledge resister */
-	u8 res8[3];		/* 0xF1 - 0xF3 */
-	u8 Lniack0_5;		/* 0xF4 Level n interrupt acknowledge resister */
-	u8 res9[3];		/* 0xF5 - 0xF7 */
-	u8 Lniack0_6;		/* 0xF8 Level n interrupt acknowledge resister */
-	u8 resa[3];		/* 0xF9 - 0xFB */
-	u8 Lniack0_7;		/* 0xFC Level n interrupt acknowledge resister */
-	u8 resb[3];		/* 0xFD - 0xFF */
-} int0_t;
-
-typedef struct int1_ctrl {
-	/* Interrupt Controller 1 */
-	u32 iprh1;		/* 0x00 Pending Register High */
-	u32 iprl1;		/* 0x04 Pending Register Low */
-	u32 imrh1;		/* 0x08 Mask Register High */
-	u32 imrl1;		/* 0x0C Mask Register Low */
-	u32 frch1;		/* 0x10 Force Register High */
-	u32 frcl1;		/* 0x14 Force Register Low */
-	u8 irlr;		/* 0x18 */
-	u8 iacklpr;		/* 0x19 */
-	u16 res1[19];		/* 0x1a - 0x3c */
-	u8 icr1[64];		/* 0x40 - 0x7F */
-	u32 res4[24];		/* 0x80 - 0xDF */
-	u8 swiack1;		/* 0xE0 Software Interrupt Acknowledge */
-	u8 res5[3];		/* 0xE1 - 0xE3 */
-	u8 Lniack1_1;		/* 0xE4 Level n interrupt acknowledge resister */
-	u8 res6[3];		/* 0xE5 - 0xE7 */
-	u8 Lniack1_2;		/* 0xE8 Level n interrupt acknowledge resister */
-	u8 res7[3];		/* 0xE9 - 0xEB */
-	u8 Lniack1_3;		/* 0xEC Level n interrupt acknowledge resister */
-	u8 res8[3];		/* 0xED - 0xEF */
-	u8 Lniack1_4;		/* 0xF0 Level n interrupt acknowledge resister */
-	u8 res9[3];		/* 0xF1 - 0xF3 */
-	u8 Lniack1_5;		/* 0xF4 Level n interrupt acknowledge resister */
-	u8 resa[3];		/* 0xF5 - 0xF7 */
-	u8 Lniack1_6;		/* 0xF8 Level n interrupt acknowledge resister */
-	u8 resb[3];		/* 0xF9 - 0xFB */
-	u8 Lniack1_7;		/* 0xFC Level n interrupt acknowledge resister */
-	u8 resc[3];		/* 0xFD - 0xFF */
-} int1_t;
-
-typedef struct intgack_ctrl1 {
-	/* Global IACK Registers */
-	u8 swiack;		/* 0xE0 Global Software Interrupt Acknowledge */
-	u8 Lniack[7];		/* 0xE1 - 0xE7 Global Level 0 Interrupt Acknowledge */
-} intgack_t;
+typedef struct canex_ctrl {
+	can_msg_t msg[16];	/* 0x00 Message Buffer 0-15 */
+} canex_t;
 
 /* GPIO port registers */
 typedef struct gpio_ctrl {
@@ -356,23 +233,4 @@ typedef struct wdog_ctrl {
 	u16 sr;			/* 0x06 Service register */
 } wdog_t;
 
-/* FlexCan module registers */
-typedef struct can_ctrl {
-	u32 mcr;		/* 0x00 Module Configuration register */
-	u32 ctrl;		/* 0x04 Control register */
-	u32 timer;		/* 0x08 Free Running Timer */
-	u32 res1;		/* 0x0C */
-	u32 rxgmask;		/* 0x10 Rx Global Mask */
-	u32 rx14mask;		/* 0x14 RxBuffer 14 Mask */
-	u32 rx15mask;		/* 0x18 RxBuffer 15 Mask */
-	u32 errcnt;		/* 0x1C Error Counter Register */
-	u32 errstat;		/* 0x20 Error and status Register */
-	u32 res2;		/* 0x24 */
-	u32 imask;		/* 0x28 Interrupt Mask Register */
-	u32 res3;		/* 0x2C */
-	u32 iflag;		/* 0x30 Interrupt Flag Register */
-	u32 res4[19];		/* 0x34 - 0x7F */
-	u32 MB0_15[2048];	/* 0x80 Message Buffer 0-15 */
-} can_t;
-
 #endif				/* __IMMAP_5235__ */
diff --git a/include/asm-m68k/immap_5249.h b/include/asm-m68k/immap_5249.h
index 6c6fbcce4..02420869e 100644
--- a/include/asm-m68k/immap_5249.h
+++ b/include/asm-m68k/immap_5249.h
@@ -25,11 +25,15 @@
 #ifndef __IMMAP_5249__
 #define __IMMAP_5249__
 
-#define MMAP_INTC		(CFG_MBAR + 0x00000040)
-#define MMAP_DTMR0		(CFG_MBAR + 0x00000140)
-#define MMAP_DTMR1		(CFG_MBAR + 0x00000180)
-#define MMAP_UART0		(CFG_MBAR + 0x000001C0)
-#define MMAP_UART1		(CFG_MBAR + 0x00000200)
-#define MMAP_QSPI		(CFG_MBAR + 0x00000400)
+#define MMAP_INTC		(CONFIG_SYS_MBAR + 0x00000040)
+#define MMAP_FBCS		(CONFIG_SYS_MBAR + 0x00000080)
+#define MMAP_DTMR0		(CONFIG_SYS_MBAR + 0x00000140)
+#define MMAP_DTMR1		(CONFIG_SYS_MBAR + 0x00000180)
+#define MMAP_UART0		(CONFIG_SYS_MBAR + 0x000001C0)
+#define MMAP_UART1		(CONFIG_SYS_MBAR + 0x00000200)
+#define MMAP_QSPI		(CONFIG_SYS_MBAR + 0x00000400)
+
+#include <asm/coldfire/flexbus.h>
+#include <asm/coldfire/qspi.h>
 
 #endif				/* __IMMAP_5249__ */
diff --git a/include/asm-m68k/immap_5253.h b/include/asm-m68k/immap_5253.h
index aafbdd095..b5a4cb54a 100644
--- a/include/asm-m68k/immap_5253.h
+++ b/include/asm-m68k/immap_5253.h
@@ -23,73 +23,30 @@
  * MA 02111-1307 USA
  */
 
-#ifndef __IMMAP_5249__
-#define __IMMAP_5249__
-
-#define MMAP_INTC		(CFG_MBAR + 0x00000040)
-#define MMAP_DTMR0		(CFG_MBAR + 0x00000140)
-#define MMAP_DTMR1		(CFG_MBAR + 0x00000180)
-#define MMAP_UART0		(CFG_MBAR + 0x000001C0)
-#define MMAP_UART1		(CFG_MBAR + 0x00000200)
-#define MMAP_I2C0		(CFG_MBAR + 0x00000280)
-#define MMAP_QSPI		(CFG_MBAR + 0x00000400)
-#define MMAP_CAN0		(CFG_MBAR + 0x00010000)
-#define MMAP_CAN1		(CFG_MBAR + 0x00011000)
-
-#define MMAP_I2C1		(CFG_MBAR2 + 0x00000440)
-#define MMAP_UART2		(CFG_MBAR2 + 0x00000C00)
-
-/*********************************************************************
-* ATA Module (ATAC)
-*********************************************************************/
-
-/* Register read/write struct */
-typedef struct atac {
-	/* PIO */
-	u8 toff;		/* 0x00 */
-	u8 ton;			/* 0x01 */
-	u8 t1;			/* 0x02 */
-	u8 t2w;			/* 0x03 */
-	u8 t2r;			/* 0x04 */
-	u8 ta;			/* 0x05 */
-	u8 trd;			/* 0x06 */
-	u8 t4;			/* 0x07 */
-	u8 t9;			/* 0x08 */
-
-	/* DMA */
-	u8 tm;			/* 0x09 */
-	u8 tn;			/* 0x0A */
-	u8 td;			/* 0x0B */
-	u8 tk;			/* 0x0C */
-	u8 tack;		/* 0x0D */
-	u8 tenv;		/* 0x0E */
-	u8 trp;			/* 0x0F */
-	u8 tzah;		/* 0x10 */
-	u8 tmli;		/* 0x11 */
-	u8 tdvh;		/* 0x12 */
-	u8 tdzfs;		/* 0x13 */
-	u8 tdvs;		/* 0x14 */
-	u8 tcvh;		/* 0x15 */
-	u8 tss;			/* 0x16 */
-	u8 tcyc;		/* 0x17 */
-
-	/* FIFO */
-	u32 fifo32;		/* 0x18 */
-	u16 fifo16;		/* 0x1C */
-	u8 rsvd0[2];
-	u8 ffill;		/* 0x20 */
-	u8 rsvd1[3];
-
-	/* ATA */
-	u8 cr;			/* 0x24 */
-	u8 rsvd2[3];
-	u8 isr;			/* 0x28 */
-	u8 rsvd3[3];
-	u8 ier;			/* 0x2C */
-	u8 rsvd4[3];
-	u8 icr;			/* 0x30 */
-	u8 rsvd5[3];
-	u8 falarm;		/* 0x34 */
-} atac_t;
-
-#endif				/* __IMMAP_5249__ */
+#ifndef __IMMAP_5253__
+#define __IMMAP_5253__
+
+#define MMAP_INTC		(CONFIG_SYS_MBAR + 0x00000040)
+#define MMAP_FBCS		(CONFIG_SYS_MBAR + 0x00000080)
+#define MMAP_DTMR0		(CONFIG_SYS_MBAR + 0x00000140)
+#define MMAP_DTMR1		(CONFIG_SYS_MBAR + 0x00000180)
+#define MMAP_UART0		(CONFIG_SYS_MBAR + 0x000001C0)
+#define MMAP_UART1		(CONFIG_SYS_MBAR + 0x00000200)
+#define MMAP_I2C0		(CONFIG_SYS_MBAR + 0x00000280)
+#define MMAP_QSPI		(CONFIG_SYS_MBAR + 0x00000400)
+#define MMAP_CAN0		(CONFIG_SYS_MBAR + 0x00010000)
+#define MMAP_CAN1		(CONFIG_SYS_MBAR + 0x00011000)
+
+#define MMAP_I2C1		(CONFIG_SYS_MBAR2 + 0x00000440)
+#define MMAP_UART2		(CONFIG_SYS_MBAR2 + 0x00000C00)
+
+#include <asm/coldfire/ata.h>
+#include <asm/coldfire/flexbus.h>
+#include <asm/coldfire/flexcan.h>
+#include <asm/coldfire/qspi.h>
+
+typedef struct canex_ctrl {
+	can_msg_t msg[32];	/* 0x80 Message Buffer 0-31 */
+} canex_t;
+
+#endif				/* __IMMAP_5253__ */
diff --git a/include/asm-m68k/immap_5271.h b/include/asm-m68k/immap_5271.h
index d9dc01591..8ddec5c56 100644
--- a/include/asm-m68k/immap_5271.h
+++ b/include/asm-m68k/immap_5271.h
@@ -26,73 +26,50 @@
 #ifndef __IMMAP_5271__
 #define __IMMAP_5271__
 
-#define MMAP_SCM	(CFG_MBAR + 0x00000000)
-#define MMAP_SDRAM	(CFG_MBAR + 0x00000040)
-#define MMAP_FBCS	(CFG_MBAR + 0x00000080)
-#define MMAP_DMA0	(CFG_MBAR + 0x00000100)
-#define MMAP_DMA1	(CFG_MBAR + 0x00000110)
-#define MMAP_DMA2	(CFG_MBAR + 0x00000120)
-#define MMAP_DMA3	(CFG_MBAR + 0x00000130)
-#define MMAP_UART0	(CFG_MBAR + 0x00000200)
-#define MMAP_UART1	(CFG_MBAR + 0x00000240)
-#define MMAP_UART2	(CFG_MBAR + 0x00000280)
-#define MMAP_I2C	(CFG_MBAR + 0x00000300)
-#define MMAP_QSPI	(CFG_MBAR + 0x00000340)
-#define MMAP_DTMR0	(CFG_MBAR + 0x00000400)
-#define MMAP_DTMR1	(CFG_MBAR + 0x00000440)
-#define MMAP_DTMR2	(CFG_MBAR + 0x00000480)
-#define MMAP_DTMR3	(CFG_MBAR + 0x000004C0)
-#define MMAP_INTC0	(CFG_MBAR + 0x00000C00)
-#define MMAP_INTC1	(CFG_MBAR + 0x00000D00)
-#define MMAP_INTCACK	(CFG_MBAR + 0x00000F00)
-#define MMAP_FEC	(CFG_MBAR + 0x00001000)
-#define MMAP_FECFIFO	(CFG_MBAR + 0x00001400)
-#define MMAP_GPIO	(CFG_MBAR + 0x00100000)
-#define MMAP_CCM	(CFG_MBAR + 0x00110000)
-#define MMAP_PLL	(CFG_MBAR + 0x00120000)
-#define MMAP_EPORT	(CFG_MBAR + 0x00130000)
-#define MMAP_WDOG	(CFG_MBAR + 0x00140000)
-#define MMAP_PIT0	(CFG_MBAR + 0x00150000)
-#define MMAP_PIT1	(CFG_MBAR + 0x00160000)
-#define MMAP_PIT2	(CFG_MBAR + 0x00170000)
-#define MMAP_PIT3	(CFG_MBAR + 0x00180000)
-#define MMAP_MDHA	(CFG_MBAR + 0x00190000)
-#define MMAP_RNG	(CFG_MBAR + 0x001A0000)
-#define MMAP_SKHA	(CFG_MBAR + 0x001B0000)
-#define MMAP_CAN1	(CFG_MBAR + 0x001C0000)
-#define MMAP_ETPU	(CFG_MBAR + 0x001D0000)
-#define MMAP_CAN2	(CFG_MBAR + 0x001F0000)
+#define MMAP_SCM	(CONFIG_SYS_MBAR + 0x00000000)
+#define MMAP_SDRAM	(CONFIG_SYS_MBAR + 0x00000040)
+#define MMAP_FBCS	(CONFIG_SYS_MBAR + 0x00000080)
+#define MMAP_DMA0	(CONFIG_SYS_MBAR + 0x00000100)
+#define MMAP_DMA1	(CONFIG_SYS_MBAR + 0x00000110)
+#define MMAP_DMA2	(CONFIG_SYS_MBAR + 0x00000120)
+#define MMAP_DMA3	(CONFIG_SYS_MBAR + 0x00000130)
+#define MMAP_UART0	(CONFIG_SYS_MBAR + 0x00000200)
+#define MMAP_UART1	(CONFIG_SYS_MBAR + 0x00000240)
+#define MMAP_UART2	(CONFIG_SYS_MBAR + 0x00000280)
+#define MMAP_I2C	(CONFIG_SYS_MBAR + 0x00000300)
+#define MMAP_QSPI	(CONFIG_SYS_MBAR + 0x00000340)
+#define MMAP_DTMR0	(CONFIG_SYS_MBAR + 0x00000400)
+#define MMAP_DTMR1	(CONFIG_SYS_MBAR + 0x00000440)
+#define MMAP_DTMR2	(CONFIG_SYS_MBAR + 0x00000480)
+#define MMAP_DTMR3	(CONFIG_SYS_MBAR + 0x000004C0)
+#define MMAP_INTC0	(CONFIG_SYS_MBAR + 0x00000C00)
+#define MMAP_INTC1	(CONFIG_SYS_MBAR + 0x00000D00)
+#define MMAP_INTCACK	(CONFIG_SYS_MBAR + 0x00000F00)
+#define MMAP_FEC	(CONFIG_SYS_MBAR + 0x00001000)
+#define MMAP_FECFIFO	(CONFIG_SYS_MBAR + 0x00001400)
+#define MMAP_GPIO	(CONFIG_SYS_MBAR + 0x00100000)
+#define MMAP_CCM	(CONFIG_SYS_MBAR + 0x00110000)
+#define MMAP_PLL	(CONFIG_SYS_MBAR + 0x00120000)
+#define MMAP_EPORT	(CONFIG_SYS_MBAR + 0x00130000)
+#define MMAP_WDOG	(CONFIG_SYS_MBAR + 0x00140000)
+#define MMAP_PIT0	(CONFIG_SYS_MBAR + 0x00150000)
+#define MMAP_PIT1	(CONFIG_SYS_MBAR + 0x00160000)
+#define MMAP_PIT2	(CONFIG_SYS_MBAR + 0x00170000)
+#define MMAP_PIT3	(CONFIG_SYS_MBAR + 0x00180000)
+#define MMAP_MDHA	(CONFIG_SYS_MBAR + 0x00190000)
+#define MMAP_RNG	(CONFIG_SYS_MBAR + 0x001A0000)
+#define MMAP_SKHA	(CONFIG_SYS_MBAR + 0x001B0000)
+#define MMAP_CAN1	(CONFIG_SYS_MBAR + 0x001C0000)
+#define MMAP_ETPU	(CONFIG_SYS_MBAR + 0x001D0000)
+#define MMAP_CAN2	(CONFIG_SYS_MBAR + 0x001F0000)
+
+#include <asm/coldfire/eport.h>
+#include <asm/coldfire/flexbus.h>
+#include <asm/coldfire/intctrl.h>
+#include <asm/coldfire/mdha.h>
+#include <asm/coldfire/qspi.h>
+#include <asm/coldfire/rng.h>
+#include <asm/coldfire/skha.h>
 
-/* Interrupt module registers */
-typedef struct int0_ctrl {
-	/* Interrupt Controller 0 */
-	u32 iprh0;		/* 0x00 Pending Register High */
-	u32 iprl0;		/* 0x04 Pending Register Low */
-	u32 imrh0;		/* 0x08 Mask Register High */
-	u32 imrl0;		/* 0x0C Mask Register Low */
-	u32 frch0;		/* 0x10 Force Register High */
-	u32 frcl0;		/* 0x14 Force Register Low */
-	u8 irlr;		/* 0x18 */
-	u8 iacklpr;		/* 0x19 */
-	u16 res1[19];		/* 0x1a - 0x3c */
-	u8 icr0[64];		/* 0x40 - 0x7F Control registers */
-	u32 res3[24];		/* 0x80 - 0xDF */
-	u8 swiack0;		/* 0xE0 Software Interrupt Acknowledge */
-	u8 res4[3];		/* 0xE1 - 0xE3 */
-	u8 Lniack0_1;		/* 0xE4 Level n interrupt acknowledge resister */
-	u8 res5[3];		/* 0xE5 - 0xE7 */
-	u8 Lniack0_2;		/* 0xE8 Level n interrupt acknowledge resister */
-	u8 res6[3];		/* 0xE9 - 0xEB */
-	u8 Lniack0_3;		/* 0xEC Level n interrupt acknowledge resister */
-	u8 res7[3];		/* 0xED - 0xEF */
-	u8 Lniack0_4;		/* 0xF0 Level n interrupt acknowledge resister */
-	u8 res8[3];		/* 0xF1 - 0xF3 */
-	u8 Lniack0_5;		/* 0xF4 Level n interrupt acknowledge resister */
-	u8 res9[3];		/* 0xF5 - 0xF7 */
-	u8 Lniack0_6;		/* 0xF8 Level n interrupt acknowledge resister */
-	u8 resa[3];		/* 0xF9 - 0xFB */
-	u8 Lniack0_7;		/* 0xFC Level n interrupt acknowledge resister */
-	u8 resb[3];		/* 0xFD - 0xFF */
-} int0_t;
 
 #endif				/* __IMMAP_5271__ */
diff --git a/include/asm-m68k/immap_5272.h b/include/asm-m68k/immap_5272.h
index 2ebb140b0..8d4254bcd 100644
--- a/include/asm-m68k/immap_5272.h
+++ b/include/asm-m68k/immap_5272.h
@@ -25,24 +25,26 @@
 #ifndef __IMMAP_5272__
 #define __IMMAP_5272__
 
-#define MMAP_CFG	(CFG_MBAR + 0x00000000)
-#define MMAP_INTC	(CFG_MBAR + 0x00000020)
-#define MMAP_FBCS	(CFG_MBAR + 0x00000040)
-#define MMAP_GPIO	(CFG_MBAR + 0x00000080)
-#define MMAP_QSPI	(CFG_MBAR + 0x000000A0)
-#define MMAP_PWM	(CFG_MBAR + 0x000000C0)
-#define MMAP_DMA0	(CFG_MBAR + 0x000000E0)
-#define MMAP_UART0	(CFG_MBAR + 0x00000100)
-#define MMAP_UART1	(CFG_MBAR + 0x00000140)
-#define MMAP_SDRAM	(CFG_MBAR + 0x00000180)
-#define MMAP_TMR0	(CFG_MBAR + 0x00000200)
-#define MMAP_TMR1	(CFG_MBAR + 0x00000220)
-#define MMAP_TMR2	(CFG_MBAR + 0x00000240)
-#define MMAP_TMR3	(CFG_MBAR + 0x00000260)
-#define MMAP_WDOG	(CFG_MBAR + 0x00000280)
-#define MMAP_PLIC	(CFG_MBAR + 0x00000300)
-#define MMAP_FEC	(CFG_MBAR + 0x00000840)
-#define MMAP_USB	(CFG_MBAR + 0x00001000)
+#define MMAP_CFG	(CONFIG_SYS_MBAR + 0x00000000)
+#define MMAP_INTC	(CONFIG_SYS_MBAR + 0x00000020)
+#define MMAP_FBCS	(CONFIG_SYS_MBAR + 0x00000040)
+#define MMAP_GPIO	(CONFIG_SYS_MBAR + 0x00000080)
+#define MMAP_QSPI	(CONFIG_SYS_MBAR + 0x000000A0)
+#define MMAP_PWM	(CONFIG_SYS_MBAR + 0x000000C0)
+#define MMAP_DMA0	(CONFIG_SYS_MBAR + 0x000000E0)
+#define MMAP_UART0	(CONFIG_SYS_MBAR + 0x00000100)
+#define MMAP_UART1	(CONFIG_SYS_MBAR + 0x00000140)
+#define MMAP_SDRAM	(CONFIG_SYS_MBAR + 0x00000180)
+#define MMAP_TMR0	(CONFIG_SYS_MBAR + 0x00000200)
+#define MMAP_TMR1	(CONFIG_SYS_MBAR + 0x00000220)
+#define MMAP_TMR2	(CONFIG_SYS_MBAR + 0x00000240)
+#define MMAP_TMR3	(CONFIG_SYS_MBAR + 0x00000260)
+#define MMAP_WDOG	(CONFIG_SYS_MBAR + 0x00000280)
+#define MMAP_PLIC	(CONFIG_SYS_MBAR + 0x00000300)
+#define MMAP_FEC	(CONFIG_SYS_MBAR + 0x00000840)
+#define MMAP_USB	(CONFIG_SYS_MBAR + 0x00001000)
+
+#include <asm/coldfire/pwm.h>
 
 /* System configuration registers */
 typedef struct sys_ctrl {
@@ -104,38 +106,6 @@ typedef struct gpio_ctrl {
 	uchar res2[4];
 } gpio_t;
 
-/* QSPI module registers */
-typedef struct qspi_ctrl {
-	ushort qspi_qmr;
-	uchar res1[2];
-	ushort qspi_qdlyr;
-	uchar res2[2];
-	ushort qspi_qwr;
-	uchar res3[2];
-	ushort qspi_qir;
-	uchar res4[2];
-	ushort qspi_qar;
-	uchar res5[2];
-	ushort qspi_qdr;
-	uchar res6[10];
-} qspi_t;
-
-/* PWM module registers */
-typedef struct pwm_ctrl {
-	uchar pwm_pwcr0;
-	uchar res1[3];
-	uchar pwm_pwcr1;
-	uchar res2[3];
-	uchar pwm_pwcr2;
-	uchar res3[7];
-	uchar pwm_pwwd0;
-	uchar res4[3];
-	uchar pwm_pwwd1;
-	uchar res5[3];
-	uchar pwm_pwwd2;
-	uchar res6[7];
-} pwm_t;
-
 /* DMA module registers */
 typedef struct dma_ctrl {
 	ulong dma_dmr;
diff --git a/include/asm-m68k/immap_5275.h b/include/asm-m68k/immap_5275.h
index 774866e34..46426a33d 100644
--- a/include/asm-m68k/immap_5275.h
+++ b/include/asm-m68k/immap_5275.h
@@ -27,44 +27,53 @@
 #ifndef __IMMAP_5275__
 #define __IMMAP_5275__
 
-#define MMAP_SCM	(CFG_MBAR + 0x00000000)
-#define MMAP_SDRAM	(CFG_MBAR + 0x00000040)
-#define MMAP_FBCS	(CFG_MBAR + 0x00000080)
-#define MMAP_DMA0	(CFG_MBAR + 0x00000100)
-#define MMAP_DMA1	(CFG_MBAR + 0x00000110)
-#define MMAP_DMA2	(CFG_MBAR + 0x00000120)
-#define MMAP_DMA3	(CFG_MBAR + 0x00000130)
-#define MMAP_UART0	(CFG_MBAR + 0x00000200)
-#define MMAP_UART1	(CFG_MBAR + 0x00000240)
-#define MMAP_UART2	(CFG_MBAR + 0x00000280)
-#define MMAP_I2C	(CFG_MBAR + 0x00000300)
-#define MMAP_QSPI	(CFG_MBAR + 0x00000340)
-#define MMAP_DTMR0	(CFG_MBAR + 0x00000400)
-#define MMAP_DTMR1	(CFG_MBAR + 0x00000440)
-#define MMAP_DTMR2	(CFG_MBAR + 0x00000480)
-#define MMAP_DTMR3	(CFG_MBAR + 0x000004C0)
-#define MMAP_INTC0	(CFG_MBAR + 0x00000C00)
-#define MMAP_INTC1	(CFG_MBAR + 0x00000D00)
-#define MMAP_INTCACK	(CFG_MBAR + 0x00000F00)
-#define MMAP_FEC0	(CFG_MBAR + 0x00001000)
-#define MMAP_FEC0FIFO	(CFG_MBAR + 0x00001400)
-#define MMAP_FEC1	(CFG_MBAR + 0x00001800)
-#define MMAP_FEC1FIFO	(CFG_MBAR + 0x00001C00)
-#define MMAP_GPIO	(CFG_MBAR + 0x00100000)
-#define MMAP_RCM	(CFG_MBAR + 0x00110000)
-#define MMAP_CCM	(CFG_MBAR + 0x00110004)
-#define MMAP_PLL	(CFG_MBAR + 0x00120000)
-#define MMAP_EPORT	(CFG_MBAR + 0x00130000)
-#define MMAP_WDOG	(CFG_MBAR + 0x00140000)
-#define MMAP_PIT0	(CFG_MBAR + 0x00150000)
-#define MMAP_PIT1	(CFG_MBAR + 0x00160000)
-#define MMAP_PIT2	(CFG_MBAR + 0x00170000)
-#define MMAP_PIT3	(CFG_MBAR + 0x00180000)
-#define MMAP_MDHA	(CFG_MBAR + 0x00190000)
-#define MMAP_RNG	(CFG_MBAR + 0x001A0000)
-#define MMAP_SKHA	(CFG_MBAR + 0x001B0000)
-#define MMAP_USB	(CFG_MBAR + 0x001C0000)
-#define MMAP_PWM0	(CFG_MBAR + 0x001D0000)
+#define MMAP_SCM	(CONFIG_SYS_MBAR + 0x00000000)
+#define MMAP_SDRAM	(CONFIG_SYS_MBAR + 0x00000040)
+#define MMAP_FBCS	(CONFIG_SYS_MBAR + 0x00000080)
+#define MMAP_DMA0	(CONFIG_SYS_MBAR + 0x00000100)
+#define MMAP_DMA1	(CONFIG_SYS_MBAR + 0x00000110)
+#define MMAP_DMA2	(CONFIG_SYS_MBAR + 0x00000120)
+#define MMAP_DMA3	(CONFIG_SYS_MBAR + 0x00000130)
+#define MMAP_UART0	(CONFIG_SYS_MBAR + 0x00000200)
+#define MMAP_UART1	(CONFIG_SYS_MBAR + 0x00000240)
+#define MMAP_UART2	(CONFIG_SYS_MBAR + 0x00000280)
+#define MMAP_I2C	(CONFIG_SYS_MBAR + 0x00000300)
+#define MMAP_QSPI	(CONFIG_SYS_MBAR + 0x00000340)
+#define MMAP_DTMR0	(CONFIG_SYS_MBAR + 0x00000400)
+#define MMAP_DTMR1	(CONFIG_SYS_MBAR + 0x00000440)
+#define MMAP_DTMR2	(CONFIG_SYS_MBAR + 0x00000480)
+#define MMAP_DTMR3	(CONFIG_SYS_MBAR + 0x000004C0)
+#define MMAP_INTC0	(CONFIG_SYS_MBAR + 0x00000C00)
+#define MMAP_INTC1	(CONFIG_SYS_MBAR + 0x00000D00)
+#define MMAP_INTCACK	(CONFIG_SYS_MBAR + 0x00000F00)
+#define MMAP_FEC0	(CONFIG_SYS_MBAR + 0x00001000)
+#define MMAP_FEC0FIFO	(CONFIG_SYS_MBAR + 0x00001400)
+#define MMAP_FEC1	(CONFIG_SYS_MBAR + 0x00001800)
+#define MMAP_FEC1FIFO	(CONFIG_SYS_MBAR + 0x00001C00)
+#define MMAP_GPIO	(CONFIG_SYS_MBAR + 0x00100000)
+#define MMAP_RCM	(CONFIG_SYS_MBAR + 0x00110000)
+#define MMAP_CCM	(CONFIG_SYS_MBAR + 0x00110004)
+#define MMAP_PLL	(CONFIG_SYS_MBAR + 0x00120000)
+#define MMAP_EPORT	(CONFIG_SYS_MBAR + 0x00130000)
+#define MMAP_WDOG	(CONFIG_SYS_MBAR + 0x00140000)
+#define MMAP_PIT0	(CONFIG_SYS_MBAR + 0x00150000)
+#define MMAP_PIT1	(CONFIG_SYS_MBAR + 0x00160000)
+#define MMAP_PIT2	(CONFIG_SYS_MBAR + 0x00170000)
+#define MMAP_PIT3	(CONFIG_SYS_MBAR + 0x00180000)
+#define MMAP_MDHA	(CONFIG_SYS_MBAR + 0x00190000)
+#define MMAP_RNG	(CONFIG_SYS_MBAR + 0x001A0000)
+#define MMAP_SKHA	(CONFIG_SYS_MBAR + 0x001B0000)
+#define MMAP_USB	(CONFIG_SYS_MBAR + 0x001C0000)
+#define MMAP_PWM0	(CONFIG_SYS_MBAR + 0x001D0000)
+
+#include <asm/coldfire/eport.h>
+#include <asm/coldfire/flexbus.h>
+#include <asm/coldfire/intctrl.h>
+#include <asm/coldfire/mdha.h>
+#include <asm/coldfire/pwm.h>
+#include <asm/coldfire/qspi.h>
+#include <asm/coldfire/rng.h>
+#include <asm/coldfire/skha.h>
 
 /* System configuration registers
 */
@@ -109,51 +118,6 @@ typedef struct sdram_ctrl {
 	u32 sdbmr1;
 } sdramctrl_t;
 
-/* Chip select module registers, offset: 0x080
-*/
-typedef struct	cs_ctlr {
-	u16 ar0;
-	u16 res1;
-	u32 mr0;
-	u16 res2;
-	u16 cr0;
-	u16 ar1;
-	u16 res3;
-	u32 mr1;
-	u16 res4;
-	u16 cr1;
-	u16 ar2;
-	u16 res5;
-	u32 mr2;
-	u16 res6;
-	u16 cr2;
-	u16 ar3;
-	u16 res7;
-	u32 mr3;
-	u16 res8;
-	u16 cr3;
-	u16 ar4;
-	u16 res9;
-	u32 mr4;
-	u16 res10;
-	u16 cr4;
-	u16 ar5;
-	u16 res11;
-	u32 mr5;
-	u16 res12;
-	u16 cr5;
-	u16 ar6;
-	u16 res13;
-	u32 mr6;
-	u16 res14;
-	u16 cr6;
-	u16 ar7;
-	u16 res15;
-	u32 mr7;
-	u16 res16;
-	u16 cr7;
-} csctrl_t;
-
 /* DMA module registers, offset 0x100
  */
 typedef struct	dma_ctrl {
@@ -163,55 +127,6 @@ typedef struct	dma_ctrl {
 	u32 dcr;
 } dma_t;
 
-/* QSPI module registers, offset 0x340
- */
-typedef struct	qspi_ctrl {
-	u16 qmr;
-	u8 res1[2];
-	u16 qdlyr;
-	u8 res2[2];
-	u16 qwr;
-	u8 res3[2];
-	u16 qir;
-	u8 res4[2];
-	u16 qar;
-	u8 res5[2];
-	u16 qdr;
-	u8 res6[2];
-} qspi_t;
-
-/* Interrupt module registers, offset 0xc00
-*/
-typedef struct int_ctrl {
-	u32 iprh0;
-	u32 iprl0;
-	u32 imrh0;
-	u32 imrl0;
-	u32 frch0;
-	u32 frcl0;
-	u8 irlr;
-	u8 iacklpr;
-	u8 res1[0x26];
-	u8 icr0[64]; /* No ICR0, done this way for readability */
-	u8 res2[0x60];
-	u8 swiack0;
-	u8 res3[3];
-	u8 Lniack0_1;
-	u8 res4[3];
-	u8 Lniack0_2;
-	u8 res5[3];
-	u8 Lniack0_3;
-	u8 res6[3];
-	u8 Lniack0_4;
-	u8 res7[3];
-	u8 Lniack0_5;
-	u8 res8[3];
-	u8 Lniack0_6;
-	u8 res9[3];
-	u8 Lniack0_7;
-	u8 res10[3];
-} int0_t;
-
 /* GPIO port registers
 */
 typedef struct	gpio_ctrl {
@@ -325,23 +240,6 @@ typedef struct	gpio_ctrl {
 } gpio_t;
 
 
-/* PWM module registers
- */
-typedef struct	pwm_ctrl {
-	u8 pwcr0;
-	u8 res1[3];
-	u8 pwcr1;
-	u8 res2[3];
-	u8 pwcr2;
-	u8 res3[7];
-	u8 pwwd0;
-	u8 res4[3];
-	u8 pwwd1;
-	u8 res5[3];
-	u8 pwwd2;
-	u8 res6[7];
-} pwm_t;
-
 /* Watchdog registers
  */
 typedef struct wdog_ctrl {
diff --git a/include/asm-m68k/immap_5282.h b/include/asm-m68k/immap_5282.h
index e82960ac0..dd526a119 100644
--- a/include/asm-m68k/immap_5282.h
+++ b/include/asm-m68k/immap_5282.h
@@ -25,42 +25,48 @@
 #ifndef __IMMAP_5282__
 #define __IMMAP_5282__
 
-#define MMAP_SCM	(CFG_MBAR + 0x00000000)
-#define MMAP_SDRAMC	(CFG_MBAR + 0x00000040)
-#define MMAP_FBCS	(CFG_MBAR + 0x00000080)
-#define MMAP_DMA0	(CFG_MBAR + 0x00000100)
-#define MMAP_DMA1	(CFG_MBAR + 0x00000140)
-#define MMAP_DMA2	(CFG_MBAR + 0x00000180)
-#define MMAP_DMA3	(CFG_MBAR + 0x000001C0)
-#define MMAP_UART0	(CFG_MBAR + 0x00000200)
-#define MMAP_UART1	(CFG_MBAR + 0x00000240)
-#define MMAP_UART2	(CFG_MBAR + 0x00000280)
-#define MMAP_I2C	(CFG_MBAR + 0x00000300)
-#define MMAP_QSPI	(CFG_MBAR + 0x00000340)
-#define MMAP_DTMR0	(CFG_MBAR + 0x00000400)
-#define MMAP_DTMR1	(CFG_MBAR + 0x00000440)
-#define MMAP_DTMR2	(CFG_MBAR + 0x00000480)
-#define MMAP_DTMR3	(CFG_MBAR + 0x000004C0)
-#define MMAP_INTC0	(CFG_MBAR + 0x00000C00)
-#define MMAP_INTC1	(CFG_MBAR + 0x00000D00)
-#define MMAP_INTCACK	(CFG_MBAR + 0x00000F00)
-#define MMAP_FEC	(CFG_MBAR + 0x00001000)
-#define MMAP_FECFIFO	(CFG_MBAR + 0x00001400)
-#define MMAP_GPIO	(CFG_MBAR + 0x00100000)
-#define MMAP_CCM	(CFG_MBAR + 0x00110000)
-#define MMAP_PLL	(CFG_MBAR + 0x00120000)
-#define MMAP_EPORT	(CFG_MBAR + 0x00130000)
-#define MMAP_WDOG	(CFG_MBAR + 0x00140000)
-#define MMAP_PIT0	(CFG_MBAR + 0x00150000)
-#define MMAP_PIT1	(CFG_MBAR + 0x00160000)
-#define MMAP_PIT2	(CFG_MBAR + 0x00170000)
-#define MMAP_PIT3	(CFG_MBAR + 0x00180000)
-#define MMAP_QADC	(CFG_MBAR + 0x00190000)
-#define MMAP_GPTMRA	(CFG_MBAR + 0x001A0000)
-#define MMAP_GPTMRB	(CFG_MBAR + 0x001B0000)
-#define MMAP_CAN	(CFG_MBAR + 0x001C0000)
-#define MMAP_CFMC	(CFG_MBAR + 0x001D0000)
-#define MMAP_CFMMEM	(CFG_MBAR + 0x04000000)
+#define MMAP_SCM	(CONFIG_SYS_MBAR + 0x00000000)
+#define MMAP_SDRAMC	(CONFIG_SYS_MBAR + 0x00000040)
+#define MMAP_FBCS	(CONFIG_SYS_MBAR + 0x00000080)
+#define MMAP_DMA0	(CONFIG_SYS_MBAR + 0x00000100)
+#define MMAP_DMA1	(CONFIG_SYS_MBAR + 0x00000140)
+#define MMAP_DMA2	(CONFIG_SYS_MBAR + 0x00000180)
+#define MMAP_DMA3	(CONFIG_SYS_MBAR + 0x000001C0)
+#define MMAP_UART0	(CONFIG_SYS_MBAR + 0x00000200)
+#define MMAP_UART1	(CONFIG_SYS_MBAR + 0x00000240)
+#define MMAP_UART2	(CONFIG_SYS_MBAR + 0x00000280)
+#define MMAP_I2C	(CONFIG_SYS_MBAR + 0x00000300)
+#define MMAP_QSPI	(CONFIG_SYS_MBAR + 0x00000340)
+#define MMAP_DTMR0	(CONFIG_SYS_MBAR + 0x00000400)
+#define MMAP_DTMR1	(CONFIG_SYS_MBAR + 0x00000440)
+#define MMAP_DTMR2	(CONFIG_SYS_MBAR + 0x00000480)
+#define MMAP_DTMR3	(CONFIG_SYS_MBAR + 0x000004C0)
+#define MMAP_INTC0	(CONFIG_SYS_MBAR + 0x00000C00)
+#define MMAP_INTC1	(CONFIG_SYS_MBAR + 0x00000D00)
+#define MMAP_INTCACK	(CONFIG_SYS_MBAR + 0x00000F00)
+#define MMAP_FEC	(CONFIG_SYS_MBAR + 0x00001000)
+#define MMAP_FECFIFO	(CONFIG_SYS_MBAR + 0x00001400)
+#define MMAP_GPIO	(CONFIG_SYS_MBAR + 0x00100000)
+#define MMAP_CCM	(CONFIG_SYS_MBAR + 0x00110000)
+#define MMAP_PLL	(CONFIG_SYS_MBAR + 0x00120000)
+#define MMAP_EPORT	(CONFIG_SYS_MBAR + 0x00130000)
+#define MMAP_WDOG	(CONFIG_SYS_MBAR + 0x00140000)
+#define MMAP_PIT0	(CONFIG_SYS_MBAR + 0x00150000)
+#define MMAP_PIT1	(CONFIG_SYS_MBAR + 0x00160000)
+#define MMAP_PIT2	(CONFIG_SYS_MBAR + 0x00170000)
+#define MMAP_PIT3	(CONFIG_SYS_MBAR + 0x00180000)
+#define MMAP_QADC	(CONFIG_SYS_MBAR + 0x00190000)
+#define MMAP_GPTMRA	(CONFIG_SYS_MBAR + 0x001A0000)
+#define MMAP_GPTMRB	(CONFIG_SYS_MBAR + 0x001B0000)
+#define MMAP_CAN	(CONFIG_SYS_MBAR + 0x001C0000)
+#define MMAP_CFMC	(CONFIG_SYS_MBAR + 0x001D0000)
+#define MMAP_CFMMEM	(CONFIG_SYS_MBAR + 0x04000000)
+
+#include <asm/coldfire/eport.h>
+#include <asm/coldfire/flexbus.h>
+#include <asm/coldfire/flexcan.h>
+#include <asm/coldfire/intctrl.h>
+#include <asm/coldfire/qspi.h>
 
 /* System Control Module */
 typedef struct scm_ctrl {
@@ -92,88 +98,9 @@ typedef struct scm_ctrl {
 	u16 res8;
 } scm_t;
 
-/* Flexbus module Chip select registers */
-typedef struct fbcs_ctrl {
-	u16 csar0;		/* 0x00 Chip-Select Address Register 0 */
-	u16 res0;
-	u32 csmr0;		/* 0x04 Chip-Select Mask Register 0 */
-	u16 res1;		/* 0x08 */
-	u16 cscr0;		/* 0x0A Chip-Select Control Register 0 */
-
-	u16 csar1;		/* 0x0C Chip-Select Address Register 1 */
-	u16 res2;
-	u32 csmr1;		/* 0x10 Chip-Select Mask Register 1 */
-	u16 res3;		/* 0x14 */
-	u16 cscr1;		/* 0x16 Chip-Select Control Register 1 */
-
-	u16 csar2;		/* 0x18 Chip-Select Address Register 2 */
-	u16 res4;
-	u32 csmr2;		/* 0x1C Chip-Select Mask Register 2 */
-	u16 res5;		/* 0x20 */
-	u16 cscr2;		/* 0x22 Chip-Select Control Register 2 */
-
-	u16 csar3;		/* 0x24 Chip-Select Address Register 3 */
-	u16 res6;
-	u32 csmr3;		/* 0x28 Chip-Select Mask Register 3 */
-	u16 res7;		/* 0x2C */
-	u16 cscr3;		/* 0x2E Chip-Select Control Register 3 */
-
-	u16 csar4;		/* 0x30 Chip-Select Address Register 4 */
-	u16 res8;
-	u32 csmr4;		/* 0x34 Chip-Select Mask Register 4 */
-	u16 res9;		/* 0x38 */
-	u16 cscr4;		/* 0x3A Chip-Select Control Register 4 */
-
-	u16 csar5;		/* 0x3C Chip-Select Address Register 5 */
-	u16 res10;
-	u32 csmr5;		/* 0x40 Chip-Select Mask Register 5 */
-	u16 res11;		/* 0x44 */
-	u16 cscr5;		/* 0x46 Chip-Select Control Register 5 */
-
-	u16 csar6;		/* 0x48 Chip-Select Address Register 5 */
-	u16 res12;
-	u32 csmr6;		/* 0x4C Chip-Select Mask Register 5 */
-	u16 res13;		/* 0x50 */
-	u16 cscr6;		/* 0x52 Chip-Select Control Register 5 */
-
-	u16 csar7;		/* 0x54 Chip-Select Address Register 5 */
-	u16 res14;
-	u32 csmr7;		/* 0x58 Chip-Select Mask Register 5 */
-	u16 res15;		/* 0x5C */
-	u16 cscr7;		/* 0x5E Chip-Select Control Register 5 */
-} fbcs_t;
-
-/* Interrupt module registers */
-typedef struct int0_ctrl {
-	/* Interrupt Controller 0 */
-	u32 iprh0;		/* 0x00 Pending Register High */
-	u32 iprl0;		/* 0x04 Pending Register Low */
-	u32 imrh0;		/* 0x08 Mask Register High */
-	u32 imrl0;		/* 0x0C Mask Register Low */
-	u32 frch0;		/* 0x10 Force Register High */
-	u32 frcl0;		/* 0x14 Force Register Low */
-	u8 irlr;		/* 0x18 */
-	u8 iacklpr;		/* 0x19 */
-	u16 res1[19];		/* 0x1a - 0x3c */
-	u8 icr0[64];		/* 0x40 - 0x7F Control registers */
-	u32 res3[24];		/* 0x80 - 0xDF */
-	u8 swiack0;		/* 0xE0 Software Interrupt Acknowledge */
-	u8 res4[3];		/* 0xE1 - 0xE3 */
-	u8 Lniack0_1;		/* 0xE4 Level n interrupt acknowledge resister */
-	u8 res5[3];		/* 0xE5 - 0xE7 */
-	u8 Lniack0_2;		/* 0xE8 Level n interrupt acknowledge resister */
-	u8 res6[3];		/* 0xE9 - 0xEB */
-	u8 Lniack0_3;		/* 0xEC Level n interrupt acknowledge resister */
-	u8 res7[3];		/* 0xED - 0xEF */
-	u8 Lniack0_4;		/* 0xF0 Level n interrupt acknowledge resister */
-	u8 res8[3];		/* 0xF1 - 0xF3 */
-	u8 Lniack0_5;		/* 0xF4 Level n interrupt acknowledge resister */
-	u8 res9[3];		/* 0xF5 - 0xF7 */
-	u8 Lniack0_6;		/* 0xF8 Level n interrupt acknowledge resister */
-	u8 resa[3];		/* 0xF9 - 0xFB */
-	u8 Lniack0_7;		/* 0xFC Level n interrupt acknowledge resister */
-	u8 resb[3];		/* 0xFD - 0xFF */
-} int0_t;
+typedef struct canex_ctrl {
+	can_msg_t msg[16];	/* 0x00 Message Buffer 0-15 */
+} canex_t;
 
 /* Clock Module registers */
 typedef struct pll_ctrl {
diff --git a/include/asm-m68k/immap_5301x.h b/include/asm-m68k/immap_5301x.h
new file mode 100644
index 000000000..87ac770cf
--- /dev/null
+++ b/include/asm-m68k/immap_5301x.h
@@ -0,0 +1,324 @@
+/*
+ * MCF5301x Internal Memory Map
+ *
+ * Copyright (C) 2004-2008 Freescale Semiconductor, Inc.
+ * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __IMMAP_5301X__
+#define __IMMAP_5301X__
+
+#define MMAP_SCM1	(CONFIG_SYS_MBAR + 0x00000000)
+#define MMAP_XBS	(CONFIG_SYS_MBAR + 0x00004000)
+#define MMAP_FBCS	(CONFIG_SYS_MBAR + 0x00008000)
+#define MMAP_MPU	(CONFIG_SYS_MBAR + 0x00014000)
+#define MMAP_FEC0	(CONFIG_SYS_MBAR + 0x00030000)
+#define MMAP_FEC1	(CONFIG_SYS_MBAR + 0x00034000)
+#define MMAP_SCM2	(CONFIG_SYS_MBAR + 0x00040000)
+#define MMAP_EDMA	(CONFIG_SYS_MBAR + 0x00044000)
+#define MMAP_INTC0	(CONFIG_SYS_MBAR + 0x00048000)
+#define MMAP_INTC1	(CONFIG_SYS_MBAR + 0x0004C000)
+#define MMAP_INTCACK	(CONFIG_SYS_MBAR + 0x00054000)
+#define MMAP_I2C	(CONFIG_SYS_MBAR + 0x00058000)
+#define MMAP_DSPI	(CONFIG_SYS_MBAR + 0x0005C000)
+#define MMAP_UART0	(CONFIG_SYS_MBAR + 0x00060000)
+#define MMAP_UART1	(CONFIG_SYS_MBAR + 0x00064000)
+#define MMAP_UART2	(CONFIG_SYS_MBAR + 0x00068000)
+#define MMAP_DTMR0	(CONFIG_SYS_MBAR + 0x00070000)
+#define MMAP_DTMR1	(CONFIG_SYS_MBAR + 0x00074000)
+#define MMAP_DTMR2	(CONFIG_SYS_MBAR + 0x00078000)
+#define MMAP_DTMR3	(CONFIG_SYS_MBAR + 0x0007C000)
+#define MMAP_PIT0	(CONFIG_SYS_MBAR + 0x00080000)
+#define MMAP_PIT1	(CONFIG_SYS_MBAR + 0x00084000)
+#define MMAP_PIT2	(CONFIG_SYS_MBAR + 0x00088000)
+#define MMAP_PIT3	(CONFIG_SYS_MBAR + 0x0008C000)
+#define MMAP_EPORT0	(CONFIG_SYS_MBAR + 0x00090000)
+#define MMAP_EPORT1	(CONFIG_SYS_MBAR + 0x00094000)
+#define MMAP_VOICOD	(CONFIG_SYS_MBAR + 0x0009C000)
+#define MMAP_RCM	(CONFIG_SYS_MBAR + 0x000A0000)
+#define MMAP_CCM	(CONFIG_SYS_MBAR + 0x000A0004)
+#define MMAP_GPIO	(CONFIG_SYS_MBAR + 0x000A4000)
+#define MMAP_RTC	(CONFIG_SYS_MBAR + 0x000A8000)
+#define MMAP_SIM	(CONFIG_SYS_MBAR + 0x000AC000)
+#define MMAP_USBOTG	(CONFIG_SYS_MBAR + 0x000B0000)
+#define MMAP_USBH	(CONFIG_SYS_MBAR + 0x000B4000)
+#define MMAP_SDRAM	(CONFIG_SYS_MBAR + 0x000B8000)
+#define MMAP_SSI	(CONFIG_SYS_MBAR + 0x000BC000)
+#define MMAP_PLL	(CONFIG_SYS_MBAR + 0x000C0000)
+#define MMAP_RNG	(CONFIG_SYS_MBAR + 0x000C4000)
+#define MMAP_IIM	(CONFIG_SYS_MBAR + 0x000C8000)
+#define MMAP_ESDHC	(CONFIG_SYS_MBAR + 0x000CC000)
+
+#include <asm/coldfire/crossbar.h>
+#include <asm/coldfire/dspi.h>
+#include <asm/coldfire/edma.h>
+#include <asm/coldfire/eport.h>
+#include <asm/coldfire/flexbus.h>
+#include <asm/coldfire/intctrl.h>
+#include <asm/coldfire/ssi.h>
+#include <asm/coldfire/rng.h>
+#include <asm/rtc.h>
+
+/* System Controller Module */
+typedef struct scm1 {
+	u32 mpr;		/* 0x00 Master Privilege */
+	u32 rsvd1[7];
+	u32 pacra;		/* 0x20 Peripheral Access Ctrl A */
+	u32 pacrb;		/* 0x24 Peripheral Access Ctrl B */
+	u32 pacrc;		/* 0x28 Peripheral Access Ctrl C */
+	u32 pacrd;		/* 0x2C Peripheral Access Ctrl D */
+	u32 rsvd2[4];
+	u32 pacre;		/* 0x40 Peripheral Access Ctrl E */
+	u32 pacrf;		/* 0x44 Peripheral Access Ctrl F */
+	u32 pacrg;		/* 0x48 Peripheral Access Ctrl G */
+} scm1_t;
+
+typedef struct scm2 {
+	u8 rsvd1[19];		/* 0x00 - 0x12 */
+	u8 wcr;			/* 0x13 */
+	u16 rsvd2;		/* 0x14 - 0x15 */
+	u16 cwcr;		/* 0x16 */
+	u8 rsvd3[3];		/* 0x18 - 0x1A */
+	u8 cwsr;		/* 0x1B */
+	u8 rsvd4[3];		/* 0x1C - 0x1E */
+	u8 scmisr;		/* 0x1F */
+	u32 rsvd5;		/* 0x20 - 0x23 */
+	u8 bcr;			/* 0x24 */
+	u8 rsvd6[74];		/* 0x25 - 0x6F */
+	u32 cfadr;		/* 0x70 */
+	u8 rsvd7;		/* 0x74 */
+	u8 cfier;		/* 0x75 */
+	u8 cfloc;		/* 0x76 */
+	u8 cfatr;		/* 0x77 */
+	u32 rsvd8;		/* 0x78 - 0x7B */
+	u32 cfdtr;		/* 0x7C */
+} scm2_t;
+
+/* PWM module */
+typedef struct pwm_ctrl {
+	u8 en;			/* 0x00 PWM Enable */
+	u8 pol;			/* 0x01 Polarity */
+	u8 clk;			/* 0x02 Clock Select */
+	u8 prclk;		/* 0x03 Prescale Clock Select */
+	u8 cae;			/* 0x04 Center Align Enable */
+	u8 ctl;			/* 0x05 Ctrl */
+	u8 res1[2];		/* 0x06 - 0x07 */
+	u8 scla;		/* 0x08 Scale A */
+	u8 sclb;		/* 0x09 Scale B */
+	u8 res2[2];		/* 0x0A - 0x0B */
+	u8 cnt0;		/* 0x0C Channel 0 Counter */
+	u8 cnt1;		/* 0x0D Channel 1 Counter */
+	u8 cnt2;		/* 0x0E Channel 2 Counter */
+	u8 cnt3;		/* 0x0F Channel 3 Counter */
+	u8 cnt4;		/* 0x10 Channel 4 Counter */
+	u8 cnt5;		/* 0x11 Channel 5 Counter */
+	u8 cnt6;		/* 0x12 Channel 6 Counter */
+	u8 cnt7;		/* 0x13 Channel 7 Counter */
+	u8 per0;		/* 0x14 Channel 0 Period */
+	u8 per1;		/* 0x15 Channel 1 Period */
+	u8 per2;		/* 0x16 Channel 2 Period */
+	u8 per3;		/* 0x17 Channel 3 Period */
+	u8 per4;		/* 0x18 Channel 4 Period */
+	u8 per5;		/* 0x19 Channel 5 Period */
+	u8 per6;		/* 0x1A Channel 6 Period */
+	u8 per7;		/* 0x1B Channel 7 Period */
+	u8 dty0;		/* 0x1C Channel 0 Duty */
+	u8 dty1;		/* 0x1D Channel 1 Duty */
+	u8 dty2;		/* 0x1E Channel 2 Duty */
+	u8 dty3;		/* 0x1F Channel 3 Duty */
+	u8 dty4;		/* 0x20 Channel 4 Duty */
+	u8 dty5;		/* 0x21 Channel 5 Duty */
+	u8 dty6;		/* 0x22 Channel 6 Duty */
+	u8 dty7;		/* 0x23 Channel 7 Duty */
+	u8 sdn;			/* 0x24 Shutdown */
+	u8 res3[3];		/* 0x25 - 0x27 */
+} pwm_t;
+
+/* Chip configuration module */
+typedef struct rcm {
+	u8 rcr;
+	u8 rsr;
+} rcm_t;
+
+typedef struct ccm_ctrl {
+	u16 ccr;		/* 0x00 Chip Cfg */
+	u16 res1;		/* 0x02 */
+	u16 rcon;		/* 0x04 Reset Cfg */
+	u16 cir;		/* 0x06 Chip ID */
+	u32 res2;		/* 0x08 */
+	u16 misccr;		/* 0x0A Misc Ctrl */
+	u16 cdr;		/* 0x0C Clock divider */
+	u16 uhcsr;		/* 0x10 USB Host status */
+	u16 uocsr;		/* 0x12 USB On-the-Go Status */
+	u16 res3;		/* 0x14 */
+	u16 codeccr;		/* 0x16 Codec Control */
+	u16 misccr2;		/* 0x18 Misc2 Ctrl */
+} ccm_t;
+
+/* GPIO port */
+typedef struct gpio_ctrl {
+	/* Port Output Data */
+	u8 podr_fbctl;		/* 0x00 */
+	u8 podr_be;		/* 0x01 */
+	u8 podr_cs;		/* 0x02 */
+	u8 podr_dspi;		/* 0x03 */
+	u8 res01;		/* 0x04 */
+	u8 podr_fec0;		/* 0x05 */
+	u8 podr_feci2c;		/* 0x06 */
+	u8 res02[2];		/* 0x07 - 0x08 */
+	u8 podr_simp1;		/* 0x09 */
+	u8 podr_simp0;		/* 0x0A */
+	u8 podr_timer;		/* 0x0B */
+	u8 podr_uart;		/* 0x0C */
+	u8 podr_debug;		/* 0x0D */
+	u8 res03;		/* 0x0E */
+	u8 podr_sdhc;		/* 0x0F */
+	u8 podr_ssi;		/* 0x10 */
+	u8 res04[3];		/* 0x11 - 0x13 */
+
+	/* Port Data Direction */
+	u8 pddr_fbctl;		/* 0x14 */
+	u8 pddr_be;		/* 0x15 */
+	u8 pddr_cs;		/* 0x16 */
+	u8 pddr_dspi;		/* 0x17 */
+	u8 res05;		/* 0x18 */
+	u8 pddr_fec0;		/* 0x19 */
+	u8 pddr_feci2c;		/* 0x1A */
+	u8 res06[2];		/* 0x1B - 0x1C */
+	u8 pddr_simp1;		/* 0x1D */
+	u8 pddr_simp0;		/* 0x1E */
+	u8 pddr_timer;		/* 0x1F */
+	u8 pddr_uart;		/* 0x20 */
+	u8 pddr_debug;		/* 0x21 */
+	u8 res07;		/* 0x22 */
+	u8 pddr_sdhc;		/* 0x23 */
+	u8 pddr_ssi;		/* 0x24 */
+	u8 res08[3];		/* 0x25 - 0x27 */
+
+	/* Port Data Direction */
+	u8 ppdr_fbctl;		/* 0x28 */
+	u8 ppdr_be;		/* 0x29 */
+	u8 ppdr_cs;		/* 0x2A */
+	u8 ppdr_dspi;		/* 0x2B */
+	u8 res09;		/* 0x2C */
+	u8 ppdr_fec0;		/* 0x2D */
+	u8 ppdr_feci2c;		/* 0x2E */
+	u8 res10[2];		/* 0x2F - 0x30 */
+	u8 ppdr_simp1;		/* 0x31 */
+	u8 ppdr_simp0;		/* 0x32 */
+	u8 ppdr_timer;		/* 0x33 */
+	u8 ppdr_uart;		/* 0x34 */
+	u8 ppdr_debug;		/* 0x35 */
+	u8 res11;		/* 0x36 */
+	u8 ppdr_sdhc;		/* 0x37 */
+	u8 ppdr_ssi;		/* 0x38 */
+	u8 res12[3];		/* 0x39 - 0x3B */
+
+	/* Port Clear Output Data */
+	u8 pclrr_fbctl;		/* 0x3C */
+	u8 pclrr_be;		/* 0x3D */
+	u8 pclrr_cs;		/* 0x3E */
+	u8 pclrr_dspi;		/* 0x3F */
+	u8 res13;		/* 0x40 */
+	u8 pclrr_fec0;		/* 0x41 */
+	u8 pclrr_feci2c;	/* 0x42 */
+	u8 res14[2];		/* 0x43 - 0x44 */
+	u8 pclrr_simp1;		/* 0x45 */
+	u8 pclrr_simp0;		/* 0x46 */
+	u8 pclrr_timer;		/* 0x47 */
+	u8 pclrr_uart;		/* 0x48 */
+	u8 pclrr_debug;		/* 0x49 */
+	u8 res15;		/* 0x4A */
+	u8 pclrr_sdhc;		/* 0x4B */
+	u8 pclrr_ssi;		/* 0x4C */
+	u8 res16[3];		/* 0x4D - 0x4F */
+
+	/* Pin Assignment */
+	u8 par_fbctl;		/* 0x50 */
+	u8 par_be;		/* 0x51 */
+	u8 par_cs;		/* 0x52 */
+	u8 res17;		/* 0x53 */
+	u8 par_dspih;		/* 0x54 */
+	u8 par_dspil;		/* 0x55 */
+	u8 par_fec;		/* 0x56 */
+	u8 par_feci2c;		/* 0x57 */
+	u8 par_irq0h;		/* 0x58 */
+	u8 par_irq0l;		/* 0x59 */
+	u8 par_irq1h;		/* 0x5A */
+	u8 par_irq1l;		/* 0x5B */
+	u8 par_simp1h;		/* 0x5C */
+	u8 par_simp1l;		/* 0x5D */
+	u8 par_simp0;		/* 0x5E */
+	u8 par_timer;		/* 0x5F */
+	u8 par_uart;		/* 0x60 */
+	u8 res18;		/* 0x61 */
+	u8 par_debug;		/* 0x62 */
+	u8 par_sdhc;		/* 0x63 */
+	u8 par_ssih;		/* 0x64 */
+	u8 par_ssil;		/* 0x65 */
+	u8 res19[2];		/* 0x66 - 0x67 */
+
+	/* Mode Select Control */
+	/* Drive Strength Control */
+	u8 mscr_mscr1;		/* 0x68 */
+	u8 mscr_mscr2;		/* 0x69 */
+	u8 mscr_mscr3;		/* 0x6A */
+	u8 mscr_mscr45;		/* 0x6B */
+	u8 srcr_dspi;		/* 0x6C */
+	u8 dscr_fec;		/* 0x6D */
+	u8 srcr_i2c;		/* 0x6E */
+	u8 srcr_irq;		/* 0x6F */
+
+	u8 srcr_sim;		/* 0x70 */
+	u8 srcr_timer;		/* 0x71 */
+	u8 srcr_uart;		/* 0x72 */
+	u8 res20;		/* 0x73 */
+	u8 srcr_sdhc;		/* 0x74 */
+	u8 srcr_ssi;		/* 0x75 */
+	u8 res21[2];		/* 0x76 - 0x77 */
+	u8 pcr_pcrh;		/* 0x78 */
+	u8 pcr_pcrl;		/* 0x79 */
+} gpio_t;
+
+/* SDRAM controller */
+typedef struct sdram_ctrl {
+	u32 mode;		/* 0x00 Mode/Extended Mode */
+	u32 ctrl;		/* 0x04 Ctrl */
+	u32 cfg1;		/* 0x08 Cfg 1 */
+	u32 cfg2;		/* 0x0C Cfg 2 */
+	u32 res1[64];		/* 0x10 - 0x10F */
+	u32 cs0;		/* 0x110 Chip Select 0 Cfg */
+	u32 cs1;		/* 0x114 Chip Select 1 Cfg */
+} sdram_t;
+
+/* Clock Module */
+typedef struct pll_ctrl {
+	u32 pcr;		/* 0x00 Ctrl */
+	u32 pdr;		/* 0x04 Divider */
+	u32 psr;		/* 0x08 Status */
+} pll_t;
+
+typedef struct rtcex {
+	u32 rsvd1[3];
+	u32 gocu;
+	u32 gocl;
+} rtcex_t;
+#endif				/* __IMMAP_5301X__ */
diff --git a/include/asm-m68k/immap_5329.h b/include/asm-m68k/immap_5329.h
index 7678406e5..4f255c6a3 100644
--- a/include/asm-m68k/immap_5329.h
+++ b/include/asm-m68k/immap_5329.h
@@ -70,9 +70,16 @@
 
 #include <asm/coldfire/crossbar.h>
 #include <asm/coldfire/edma.h>
+#include <asm/coldfire/eport.h>
+#include <asm/coldfire/qspi.h>
 #include <asm/coldfire/flexbus.h>
+#include <asm/coldfire/flexcan.h>
+#include <asm/coldfire/intctrl.h>
 #include <asm/coldfire/lcd.h>
+#include <asm/coldfire/mdha.h>
+#include <asm/coldfire/pwm.h>
 #include <asm/coldfire/ssi.h>
+#include <asm/coldfire/skha.h>
 
 /* System control module registers */
 typedef struct scm1_ctrl {
@@ -83,72 +90,6 @@ typedef struct scm1_ctrl {
 	u32 bmt0;		/*0x54 Bus Monitor Timeout 0 */
 } scm1_t;
 
-/* Message Digest Hardware Accelerator */
-typedef struct mdha_ctrl {
-	u32 mdmr;		/* 0x00 MDHA Mode Register */
-	u32 mdcr;		/* 0x04 Control register */
-	u32 mdcmr;		/* 0x08 Command Register */
-	u32 mdsr;		/* 0x0C Status Register */
-	u32 mdisr;		/* 0x10 Interrupt Status Register */
-	u32 mdimr;		/* 0x14 Interrupt Mask Register */
-	u32 mddsr;		/* 0x1C Data Size Register */
-	u32 mdin;		/* 0x20 Input FIFO */
-	u32 res1[3];		/* 0x24 - 0x2F */
-	u32 mdao;		/* 0x30 Message Digest AO Register */
-	u32 mdbo;		/* 0x34 Message Digest BO Register */
-	u32 mdco;		/* 0x38 Message Digest CO Register */
-	u32 mddo;		/* 0x3C Message Digest DO Register */
-	u32 mdeo;		/* 0x40 Message Digest EO Register */
-	u32 mdmds;		/* 0x44 Message Data Size Register */
-	u32 res[10];		/* 0x48 - 0x6F */
-	u32 mda1;		/* 0x70 Message Digest A1 Register */
-	u32 mdb1;		/* 0x74 Message Digest B1 Register */
-	u32 mdc1;		/* 0x78 Message Digest C1 Register */
-	u32 mdd1;		/* 0x7C Message Digest D1 Register */
-	u32 mde1;		/* 0x80 Message Digest E1 Register */
-} mdha_t;
-
-/* Symmetric Key Hardware Accelerator */
-typedef struct skha_ctrl {
-	u32 mr;			/* 0x00 Mode Register */
-	u32 cr;			/* 0x04 Control Register */
-	u32 cmr;		/* 0x08 Command Register */
-	u32 sr;			/* 0x0C Status Register */
-	u32 esr;		/* 0x10 Error Status Register */
-	u32 emr;		/* 0x14 Error Status Mask Register) */
-	u32 ksr;		/* 0x18 Key Size Register */
-	u32 dsr;		/* 0x1C Data Size Register */
-	u32 in;			/* 0x20 Input FIFO */
-	u32 out;		/* 0x24 Output FIFO */
-	u32 res1[2];		/* 0x28 - 0x2F */
-	u32 kdr1;		/* 0x30 Key Data Register 1  */
-	u32 kdr2;		/* 0x34 Key Data Register 2 */
-	u32 kdr3;		/* 0x38 Key Data Register 3 */
-	u32 kdr4;		/* 0x3C Key Data Register 4 */
-	u32 kdr5;		/* 0x40 Key Data Register 5 */
-	u32 kdr6;		/* 0x44 Key Data Register 6 */
-	u32 res2[10];		/* 0x48 - 0x6F */
-	u32 c1;			/* 0x70 Context 1 */
-	u32 c2;			/* 0x74 Context 2 */
-	u32 c3;			/* 0x78 Context 3 */
-	u32 c4;			/* 0x7C Context 4 */
-	u32 c5;			/* 0x80 Context 5 */
-	u32 c6;			/* 0x84 Context 6 */
-	u32 c7;			/* 0x88 Context 7 */
-	u32 c8;			/* 0x8C Context 8 */
-	u32 c9;			/* 0x90 Context 9 */
-	u32 c10;		/* 0x94 Context 10 */
-	u32 c11;		/* 0x98 Context 11 */
-} skha_t;
-
-/* Random Number Generator */
-typedef struct rng_ctrl {
-	u32 rngcr;		/* 0x00 RNG Control Register */
-	u32 rngsr;		/* 0x04 RNG Status Register */
-	u32 rnger;		/* 0x08 RNG Entropy Register */
-	u32 rngout;		/* 0x0C RNG Output FIFO */
-} rng_t;
-
 /* System control module registers 2 */
 typedef struct scm2_ctrl {
 	u32 mpr1;		/* 0x00 Master Privilege Register */
@@ -165,25 +106,6 @@ typedef struct scm2_ctrl {
 	u32 bmt1;		/* 0x54 Bus Monitor Timeout 1 */
 } scm2_t;
 
-/* FlexCan module registers */
-typedef struct can_ctrl {
-	u32 mcr;		/* 0x00 Module Configuration register */
-	u32 ctrl;		/* 0x04 Control register */
-	u32 timer;		/* 0x08 Free Running Timer */
-	u32 res1;		/* 0x0C */
-	u32 rxgmask;		/* 0x10 Rx Global Mask */
-	u32 rx14mask;		/* 0x14 RxBuffer 14 Mask */
-	u32 rx15mask;		/* 0x18 RxBuffer 15 Mask */
-	u32 errcnt;		/* 0x1C Error Counter Register */
-	u32 errstat;		/* 0x20 Error and status Register */
-	u32 res2;		/* 0x24 */
-	u32 imask;		/* 0x28 Interrupt Mask Register */
-	u32 res3;		/* 0x2C */
-	u32 iflag;		/* 0x30 Interrupt Flag Register */
-	u32 res4[19];		/* 0x34 - 0x7F */
-	u32 MB0_15[2048];	/* 0x80 Message Buffer 0-15 */
-} can_t;
-
 /* System Control Module register 3 */
 typedef struct scm3_ctrl {
 	u8 res1[19];		/* 0x00 - 0x12 */
@@ -206,148 +128,9 @@ typedef struct scm3_ctrl {
 	u32 cfdtr;		/* 0x7C Core Fault Data Register */
 } scm3_t;
 
-/* Interrupt module registers */
-typedef struct int0_ctrl {
-	/* Interrupt Controller 0 */
-	u32 iprh0;		/* 0x00 Pending Register High */
-	u32 iprl0;		/* 0x04 Pending Register Low */
-	u32 imrh0;		/* 0x08 Mask Register High */
-	u32 imrl0;		/* 0x0C Mask Register Low */
-	u32 frch0;		/* 0x10 Force Register High */
-	u32 frcl0;		/* 0x14 Force Register Low */
-	u16 res1;		/* 0x18 - 0x19 */
-	u16 icfg0;		/* 0x1A Configuration Register */
-	u8 simr0;		/* 0x1C Set Interrupt Mask */
-	u8 cimr0;		/* 0x1D Clear Interrupt Mask */
-	u8 clmask0;		/* 0x1E Current Level Mask */
-	u8 slmask;		/* 0x1F Saved Level Mask */
-	u32 res2[8];		/* 0x20 - 0x3F */
-	u8 icr0[64];		/* 0x40 - 0x7F Control registers */
-	u32 res3[24];		/* 0x80 - 0xDF */
-	u8 swiack0;		/* 0xE0 Software Interrupt Acknowledge */
-	u8 res4[3];		/* 0xE1 - 0xE3 */
-	u8 Lniack0_1;		/* 0xE4 Level n interrupt acknowledge resister */
-	u8 res5[3];		/* 0xE5 - 0xE7 */
-	u8 Lniack0_2;		/* 0xE8 Level n interrupt acknowledge resister */
-	u8 res6[3];		/* 0xE9 - 0xEB */
-	u8 Lniack0_3;		/* 0xEC Level n interrupt acknowledge resister */
-	u8 res7[3];		/* 0xED - 0xEF */
-	u8 Lniack0_4;		/* 0xF0 Level n interrupt acknowledge resister */
-	u8 res8[3];		/* 0xF1 - 0xF3 */
-	u8 Lniack0_5;		/* 0xF4 Level n interrupt acknowledge resister */
-	u8 res9[3];		/* 0xF5 - 0xF7 */
-	u8 Lniack0_6;		/* 0xF8 Level n interrupt acknowledge resister */
-	u8 resa[3];		/* 0xF9 - 0xFB */
-	u8 Lniack0_7;		/* 0xFC Level n interrupt acknowledge resister */
-	u8 resb[3];		/* 0xFD - 0xFF */
-} int0_t;
-
-typedef struct int1_ctrl {
-	/* Interrupt Controller 1 */
-	u32 iprh1;		/* 0x00 Pending Register High */
-	u32 iprl1;		/* 0x04 Pending Register Low */
-	u32 imrh1;		/* 0x08 Mask Register High */
-	u32 imrl1;		/* 0x0C Mask Register Low */
-	u32 frch1;		/* 0x10 Force Register High */
-	u32 frcl1;		/* 0x14 Force Register Low */
-	u16 res1;		/* 0x18 */
-	u16 icfg1;		/* 0x1A Configuration Register */
-	u8 simr1;		/* 0x1C Set Interrupt Mask */
-	u8 cimr1;		/* 0x1D Clear Interrupt Mask */
-	u16 res2;		/* 0x1E - 0x1F */
-	u32 res3[8];		/* 0x20 - 0x3F */
-	u8 icr1[64];		/* 0x40 - 0x7F */
-	u32 res4[24];		/* 0x80 - 0xDF */
-	u8 swiack1;		/* 0xE0 Software Interrupt Acknowledge */
-	u8 res5[3];		/* 0xE1 - 0xE3 */
-	u8 Lniack1_1;		/* 0xE4 Level n interrupt acknowledge resister */
-	u8 res6[3];		/* 0xE5 - 0xE7 */
-	u8 Lniack1_2;		/* 0xE8 Level n interrupt acknowledge resister */
-	u8 res7[3];		/* 0xE9 - 0xEB */
-	u8 Lniack1_3;		/* 0xEC Level n interrupt acknowledge resister */
-	u8 res8[3];		/* 0xED - 0xEF */
-	u8 Lniack1_4;		/* 0xF0 Level n interrupt acknowledge resister */
-	u8 res9[3];		/* 0xF1 - 0xF3 */
-	u8 Lniack1_5;		/* 0xF4 Level n interrupt acknowledge resister */
-	u8 resa[3];		/* 0xF5 - 0xF7 */
-	u8 Lniack1_6;		/* 0xF8 Level n interrupt acknowledge resister */
-	u8 resb[3];		/* 0xF9 - 0xFB */
-	u8 Lniack1_7;		/* 0xFC Level n interrupt acknowledge resister */
-	u8 resc[3];		/* 0xFD - 0xFF */
-} int1_t;
-
-typedef struct intgack_ctrl1 {
-	/* Global IACK Registers */
-	u8 swiack;		/* 0xE0 Global Software Interrupt Acknowledge */
-	u8 Lniack[7];		/* 0xE1 - 0xE7 Global Level 0 Interrupt Acknowledge */
-} intgack_t;
-
-/* QSPI module registers */
-typedef struct qspi_ctrl {
-	u16 qmr;		/* Mode register */
-	u16 res1;
-	u16 qdlyr;		/* Delay register */
-	u16 res2;
-	u16 qwr;		/* Wrap register */
-	u16 res3;
-	u16 qir;		/* Interrupt register */
-	u16 res4;
-	u16 qar;		/* Address register */
-	u16 res5;
-	u16 qdr;		/* Data register */
-	u16 res6;
-} qspi_t;
-
-/* PWM module registers */
-typedef struct pwm_ctrl {
-	u8 en;			/* 0x00 PWM Enable Register */
-	u8 pol;			/* 0x01 Polarity Register */
-	u8 clk;			/* 0x02 Clock Select Register */
-	u8 prclk;		/* 0x03 Prescale Clock Select Register */
-	u8 cae;			/* 0x04 Center Align Enable Register */
-	u8 ctl;			/* 0x05 Control Register */
-	u8 res1[2];		/* 0x06 - 0x07 */
-	u8 scla;		/* 0x08 Scale A register */
-	u8 sclb;		/* 0x09 Scale B register */
-	u8 res2[2];		/* 0x0A - 0x0B */
-	u8 cnt0;		/* 0x0C Channel 0 Counter register */
-	u8 cnt1;		/* 0x0D Channel 1 Counter register */
-	u8 cnt2;		/* 0x0E Channel 2 Counter register */
-	u8 cnt3;		/* 0x0F Channel 3 Counter register */
-	u8 cnt4;		/* 0x10 Channel 4 Counter register */
-	u8 cnt5;		/* 0x11 Channel 5 Counter register */
-	u8 cnt6;		/* 0x12 Channel 6 Counter register */
-	u8 cnt7;		/* 0x13 Channel 7 Counter register */
-	u8 per0;		/* 0x14 Channel 0 Period register */
-	u8 per1;		/* 0x15 Channel 1 Period register */
-	u8 per2;		/* 0x16 Channel 2 Period register */
-	u8 per3;		/* 0x17 Channel 3 Period register */
-	u8 per4;		/* 0x18 Channel 4 Period register */
-	u8 per5;		/* 0x19 Channel 5 Period register */
-	u8 per6;		/* 0x1A Channel 6 Period register */
-	u8 per7;		/* 0x1B Channel 7 Period register */
-	u8 dty0;		/* 0x1C Channel 0 Duty register */
-	u8 dty1;		/* 0x1D Channel 1 Duty register */
-	u8 dty2;		/* 0x1E Channel 2 Duty register */
-	u8 dty3;		/* 0x1F Channel 3 Duty register */
-	u8 dty4;		/* 0x20 Channel 4 Duty register */
-	u8 dty5;		/* 0x21 Channel 5 Duty register */
-	u8 dty6;		/* 0x22 Channel 6 Duty register */
-	u8 dty7;		/* 0x23 Channel 7 Duty register */
-	u8 sdn;			/* 0x24 Shutdown register */
-	u8 res3[3];		/* 0x25 - 0x27 */
-} pwm_t;
-
-/* Edge Port module registers */
-typedef struct eport_ctrl {
-	u16 par;		/* 0x00 Pin Assignment Register */
-	u8 ddar;		/* 0x02 Data Direction Register */
-	u8 ier;			/* 0x03 Interrupt Enable Register */
-	u8 dr;			/* 0x04 Data Register */
-	u8 pdr;			/* 0x05 Pin Data  Register */
-	u8 fr;			/* 0x06 Flag_Register */
-	u8 res1;
-} eport_t;
+typedef struct canex_ctrl {
+	can_msg_t msg[16];	/* 0x00 Message Buffer 0-15 */
+} canex_t;
 
 /* Watchdog registers */
 typedef struct wdog_ctrl {
@@ -593,53 +376,6 @@ typedef struct usb_otg {
 	u32 eptctrl3;		/* 0x1CC Endpoint control 3 */
 } usbotg_t;
 
-/* USB Host module registers */
-typedef struct usb_host {
-	u32 id;			/* 0x000 Identification Register */
-	u32 hwgeneral;		/* 0x004 General HW Parameters */
-	u32 hwhost;		/* 0x008 Host HW Parameters */
-	u32 res1;		/* 0x0C */
-	u32 hwtxbuf;		/* 0x010 TX Buffer HW Parameters */
-	u32 hwrxbuf;		/* 0x014 RX Buffer HW Parameters */
-	u32 res2[58];		/* 0x18 - 0xFF */
-
-	/* Host Controller Capability Register */
-	u8 caplength;		/* 0x100 Capability Register Length */
-	u8 res3;		/* 0x101 */
-	u16 hciver;		/* 0x102 Host Interface Version Number */
-	u32 hcsparams;		/* 0x104 Host Structural Parameters */
-	u32 hccparams;		/* 0x108 Host Capability Parameters */
-	u32 res4[13];		/* 0x10C - 0x13F */
-
-	/* Host Controller Operational Register */
-	u32 cmd;		/* 0x140 USB Command */
-	u32 sts;		/* 0x144 USB Status */
-	u32 intr;		/* 0x148 USB Interrupt Enable */
-	u32 frindex;		/* 0x14C USB Frame Index */
-	u32 res5;		/* 0x150 (ctrl segment register in EHCI spec) */
-	u32 prdlst;		/* 0x154 Periodic Frame List Base Address */
-	u32 aynclst;		/* 0x158 Current Asynchronous List Address */
-	u32 ttctrl;		/* 0x15C Host TT Asynchronous Buffer Control (non-ehci) */
-	u32 burstsize;		/* 0x160 Master Interface Data Burst Size (non-ehci) */
-	u32 txfill;		/* 0x164 Host Transmit FIFO Tuning Control  (non-ehci) */
-	u32 res6[6];		/* 0x168 - 0x17F */
-	u32 cfgflag;		/* 0x180 Configure Flag Register */
-	u32 portsc1;		/* 0x184 Port Status/Control */
-	u32 res7[8];		/* 0x188 - 0x1A7 */
-
-	/* non-ehci registers */
-	u32 mode;		/* 0x1A8 USB mode register */
-	u32 eptsetstat;		/* 0x1AC Endpoint Setup status */
-	u32 eptprime;		/* 0x1B0 Endpoint initialization */
-	u32 eptflush;		/* 0x1B4 Endpoint de-initialize */
-	u32 eptstat;		/* 0x1B8 Endpoint status */
-	u32 eptcomplete;	/* 0x1BC Endpoint Complete */
-	u32 eptctrl0;		/* 0x1C0 Endpoint control 0 */
-	u32 eptctrl1;		/* 0x1C4 Endpoint control 1 */
-	u32 eptctrl2;		/* 0x1C8 Endpoint control 2 */
-	u32 eptctrl3;		/* 0x1CC Endpoint control 3 */
-} usbhost_t;
-
 /* SDRAM controller registers */
 typedef struct sdram_ctrl {
 	u32 mode;		/* 0x00 Mode/Extended Mode register */
diff --git a/include/asm-m68k/immap_5445x.h b/include/asm-m68k/immap_5445x.h
index ef8930ecd..57cf3ec7d 100644
--- a/include/asm-m68k/immap_5445x.h
+++ b/include/asm-m68k/immap_5445x.h
@@ -69,161 +69,15 @@
 #define MMAP_USBEHCI	0xFC0B0140
 #define MMAP_USBOTG	0xFC0B01A0
 
+#include <asm/coldfire/ata.h>
 #include <asm/coldfire/crossbar.h>
 #include <asm/coldfire/dspi.h>
 #include <asm/coldfire/edma.h>
+#include <asm/coldfire/eport.h>
 #include <asm/coldfire/flexbus.h>
+#include <asm/coldfire/intctrl.h>
 #include <asm/coldfire/ssi.h>
 
-/* ATA */
-typedef struct atac {
-	/* PIO */
-	u8 toff;		/* 0x00 */
-	u8 ton;			/* 0x01 */
-	u8 t1;			/* 0x02 */
-	u8 t2w;			/* 0x03 */
-	u8 t2r;			/* 0x04 */
-	u8 ta;			/* 0x05 */
-	u8 trd;			/* 0x06 */
-	u8 t4;			/* 0x07 */
-	u8 t9;			/* 0x08 */
-
-	/* DMA */
-	u8 tm;			/* 0x09 */
-	u8 tn;			/* 0x0A */
-	u8 td;			/* 0x0B */
-	u8 tk;			/* 0x0C */
-	u8 tack;		/* 0x0D */
-	u8 tenv;		/* 0x0E */
-	u8 trp;			/* 0x0F */
-	u8 tzah;		/* 0x10 */
-	u8 tmli;		/* 0x11 */
-	u8 tdvh;		/* 0x12 */
-	u8 tdzfs;		/* 0x13 */
-	u8 tdvs;		/* 0x14 */
-	u8 tcvh;		/* 0x15 */
-	u8 tss;			/* 0x16 */
-	u8 tcyc;		/* 0x17 */
-
-	/* FIFO */
-	u32 fifo32;		/* 0x18 */
-	u16 fifo16;		/* 0x1C */
-	u8 rsvd0[2];
-	u8 ffill;		/* 0x20 */
-	u8 rsvd1[3];
-
-	/* ATA */
-	u8 cr;			/* 0x24 */
-	u8 rsvd2[3];
-	u8 isr;			/* 0x28 */
-	u8 rsvd3[3];
-	u8 ier;			/* 0x2C */
-	u8 rsvd4[3];
-	u8 icr;			/* 0x30 */
-	u8 rsvd5[3];
-	u8 falarm;		/* 0x34 */
-	u8 rsvd6[106];
-} atac_t;
-
-/* Interrupt Controller (INTC) */
-typedef struct int0_ctrl {
-	u32 iprh0;		/* 0x00 Pending Register High */
-	u32 iprl0;		/* 0x04 Pending Register Low */
-	u32 imrh0;		/* 0x08 Mask Register High */
-	u32 imrl0;		/* 0x0C Mask Register Low */
-	u32 frch0;		/* 0x10 Force Register High */
-	u32 frcl0;		/* 0x14 Force Register Low */
-	u16 res1;		/* 0x18 - 0x19 */
-	u16 icfg0;		/* 0x1A Configuration Register */
-	u8 simr0;		/* 0x1C Set Interrupt Mask */
-	u8 cimr0;		/* 0x1D Clear Interrupt Mask */
-	u8 clmask0;		/* 0x1E Current Level Mask */
-	u8 slmask;		/* 0x1F Saved Level Mask */
-	u32 res2[8];		/* 0x20 - 0x3F */
-	u8 icr0[64];		/* 0x40 - 0x7F Control registers */
-	u32 res3[24];		/* 0x80 - 0xDF */
-	u8 swiack0;		/* 0xE0 Software Interrupt Acknowledge */
-	u8 res4[3];		/* 0xE1 - 0xE3 */
-	u8 Lniack0_1;		/* 0xE4 Level n interrupt acknowledge resister */
-	u8 res5[3];		/* 0xE5 - 0xE7 */
-	u8 Lniack0_2;		/* 0xE8 Level n interrupt acknowledge resister */
-	u8 res6[3];		/* 0xE9 - 0xEB */
-	u8 Lniack0_3;		/* 0xEC Level n interrupt acknowledge resister */
-	u8 res7[3];		/* 0xED - 0xEF */
-	u8 Lniack0_4;		/* 0xF0 Level n interrupt acknowledge resister */
-	u8 res8[3];		/* 0xF1 - 0xF3 */
-	u8 Lniack0_5;		/* 0xF4 Level n interrupt acknowledge resister */
-	u8 res9[3];		/* 0xF5 - 0xF7 */
-	u8 Lniack0_6;		/* 0xF8 Level n interrupt acknowledge resister */
-	u8 resa[3];		/* 0xF9 - 0xFB */
-	u8 Lniack0_7;		/* 0xFC Level n interrupt acknowledge resister */
-	u8 resb[3];		/* 0xFD - 0xFF */
-} int0_t;
-
-typedef struct int1_ctrl {
-	/* Interrupt Controller 1 */
-	u32 iprh1;		/* 0x00 Pending Register High */
-	u32 iprl1;		/* 0x04 Pending Register Low */
-	u32 imrh1;		/* 0x08 Mask Register High */
-	u32 imrl1;		/* 0x0C Mask Register Low */
-	u32 frch1;		/* 0x10 Force Register High */
-	u32 frcl1;		/* 0x14 Force Register Low */
-	u16 res1;		/* 0x18 */
-	u16 icfg1;		/* 0x1A Configuration Register */
-	u8 simr1;		/* 0x1C Set Interrupt Mask */
-	u8 cimr1;		/* 0x1D Clear Interrupt Mask */
-	u16 res2;		/* 0x1E - 0x1F */
-	u32 res3[8];		/* 0x20 - 0x3F */
-	u8 icr1[64];		/* 0x40 - 0x7F */
-	u32 res4[24];		/* 0x80 - 0xDF */
-	u8 swiack1;		/* 0xE0 Software Interrupt Acknowledge */
-	u8 res5[3];		/* 0xE1 - 0xE3 */
-	u8 Lniack1_1;		/* 0xE4 Level n interrupt acknowledge resister */
-	u8 res6[3];		/* 0xE5 - 0xE7 */
-	u8 Lniack1_2;		/* 0xE8 Level n interrupt acknowledge resister */
-	u8 res7[3];		/* 0xE9 - 0xEB */
-	u8 Lniack1_3;		/* 0xEC Level n interrupt acknowledge resister */
-	u8 res8[3];		/* 0xED - 0xEF */
-	u8 Lniack1_4;		/* 0xF0 Level n interrupt acknowledge resister */
-	u8 res9[3];		/* 0xF1 - 0xF3 */
-	u8 Lniack1_5;		/* 0xF4 Level n interrupt acknowledge resister */
-	u8 resa[3];		/* 0xF5 - 0xF7 */
-	u8 Lniack1_6;		/* 0xF8 Level n interrupt acknowledge resister */
-	u8 resb[3];		/* 0xF9 - 0xFB */
-	u8 Lniack1_7;		/* 0xFC Level n interrupt acknowledge resister */
-	u8 resc[3];		/* 0xFD - 0xFF */
-} int1_t;
-
-/* Global Interrupt Acknowledge (IACK) */
-typedef struct iack {
-	u8 resv0[0xE0];
-	u8 gswiack;
-	u8 resv1[0x3];
-	u8 gl1iack;
-	u8 resv2[0x3];
-	u8 gl2iack;
-	u8 resv3[0x3];
-	u8 gl3iack;
-	u8 resv4[0x3];
-	u8 gl4iack;
-	u8 resv5[0x3];
-	u8 gl5iack;
-	u8 resv6[0x3];
-	u8 gl6iack;
-	u8 resv7[0x3];
-	u8 gl7iack;
-} iack_t;
-
-/* Edge Port Module (EPORT) */
-typedef struct eport {
-	u16 eppar;
-	u8 epddr;
-	u8 epier;
-	u8 epdr;
-	u8 eppdr;
-	u8 epfr;
-} eport_t;
-
 /* Watchdog Timer Modules (WTM) */
 typedef struct wtm {
 	u16 wcr;
@@ -387,14 +241,6 @@ typedef struct gpio {
 	u8 dscr_ata;		/* ATA Drive Strength Control Register */
 } gpio_t;
 
-/* Random Number Generator (RNG) */
-typedef struct rng {
-	u32 rngcr;
-	u32 rngsr;
-	u32 rnger;
-	u32 rngout;
-} rng_t;
-
 /* SDRAM Controller (SDRAMC) */
 typedef struct sdramc {
 	u32 sdmr;		/* SDRAM Mode/Extended Mode Register */
diff --git a/include/asm-m68k/immap_547x_8x.h b/include/asm-m68k/immap_547x_8x.h
index 54ef40f51..50f8b05d9 100644
--- a/include/asm-m68k/immap_547x_8x.h
+++ b/include/asm-m68k/immap_547x_8x.h
@@ -26,38 +26,42 @@
 #ifndef __IMMAP_547x_8x__
 #define __IMMAP_547x_8x__
 
-#define MMAP_SIU	(CFG_MBAR + 0x00000000)
-#define MMAP_SDRAM	(CFG_MBAR + 0x00000100)
-#define MMAP_XARB	(CFG_MBAR + 0x00000240)
-#define MMAP_FBCS	(CFG_MBAR + 0x00000500)
-#define MMAP_INTC0	(CFG_MBAR + 0x00000700)
-#define MMAP_GPTMR	(CFG_MBAR + 0x00000800)
-#define MMAP_SLT0	(CFG_MBAR + 0x00000900)
-#define MMAP_SLT1	(CFG_MBAR + 0x00000910)
-#define MMAP_GPIO	(CFG_MBAR + 0x00000A00)
-#define MMAP_PCI	(CFG_MBAR + 0x00000B00)
-#define MMAP_PCIARB	(CFG_MBAR + 0x00000C00)
-#define MMAP_EXTDMA	(CFG_MBAR + 0x00000D00)
-#define MMAP_EPORT	(CFG_MBAR + 0x00000F00)
-#define MMAP_CTM	(CFG_MBAR + 0x00007F00)
-#define MMAP_MCDMA	(CFG_MBAR + 0x00008000)
-#define MMAP_SCPCI	(CFG_MBAR + 0x00008400)
-#define MMAP_UART0	(CFG_MBAR + 0x00008600)
-#define MMAP_UART1	(CFG_MBAR + 0x00008700)
-#define MMAP_UART2	(CFG_MBAR + 0x00008800)
-#define MMAP_UART3	(CFG_MBAR + 0x00008900)
-#define MMAP_DSPI	(CFG_MBAR + 0x00008A00)
-#define MMAP_I2C	(CFG_MBAR + 0x00008F00)
-#define MMAP_FEC0	(CFG_MBAR + 0x00009000)
-#define MMAP_FEC1	(CFG_MBAR + 0x00009800)
-#define MMAP_CAN0	(CFG_MBAR + 0x0000A000)
-#define MMAP_CAN1	(CFG_MBAR + 0x0000A800)
-#define MMAP_USBD	(CFG_MBAR + 0x0000B000)
-#define MMAP_SRAM	(CFG_MBAR + 0x00010000)
-#define MMAP_SRAMCFG	(CFG_MBAR + 0x0001FF00)
-#define MMAP_SEC	(CFG_MBAR + 0x00020000)
+#define MMAP_SIU	(CONFIG_SYS_MBAR + 0x00000000)
+#define MMAP_SDRAM	(CONFIG_SYS_MBAR + 0x00000100)
+#define MMAP_XARB	(CONFIG_SYS_MBAR + 0x00000240)
+#define MMAP_FBCS	(CONFIG_SYS_MBAR + 0x00000500)
+#define MMAP_INTC0	(CONFIG_SYS_MBAR + 0x00000700)
+#define MMAP_GPTMR	(CONFIG_SYS_MBAR + 0x00000800)
+#define MMAP_SLT0	(CONFIG_SYS_MBAR + 0x00000900)
+#define MMAP_SLT1	(CONFIG_SYS_MBAR + 0x00000910)
+#define MMAP_GPIO	(CONFIG_SYS_MBAR + 0x00000A00)
+#define MMAP_PCI	(CONFIG_SYS_MBAR + 0x00000B00)
+#define MMAP_PCIARB	(CONFIG_SYS_MBAR + 0x00000C00)
+#define MMAP_EXTDMA	(CONFIG_SYS_MBAR + 0x00000D00)
+#define MMAP_EPORT	(CONFIG_SYS_MBAR + 0x00000F00)
+#define MMAP_CTM	(CONFIG_SYS_MBAR + 0x00007F00)
+#define MMAP_MCDMA	(CONFIG_SYS_MBAR + 0x00008000)
+#define MMAP_SCPCI	(CONFIG_SYS_MBAR + 0x00008400)
+#define MMAP_UART0	(CONFIG_SYS_MBAR + 0x00008600)
+#define MMAP_UART1	(CONFIG_SYS_MBAR + 0x00008700)
+#define MMAP_UART2	(CONFIG_SYS_MBAR + 0x00008800)
+#define MMAP_UART3	(CONFIG_SYS_MBAR + 0x00008900)
+#define MMAP_DSPI	(CONFIG_SYS_MBAR + 0x00008A00)
+#define MMAP_I2C	(CONFIG_SYS_MBAR + 0x00008F00)
+#define MMAP_FEC0	(CONFIG_SYS_MBAR + 0x00009000)
+#define MMAP_FEC1	(CONFIG_SYS_MBAR + 0x00009800)
+#define MMAP_CAN0	(CONFIG_SYS_MBAR + 0x0000A000)
+#define MMAP_CAN1	(CONFIG_SYS_MBAR + 0x0000A800)
+#define MMAP_USBD	(CONFIG_SYS_MBAR + 0x0000B000)
+#define MMAP_SRAM	(CONFIG_SYS_MBAR + 0x00010000)
+#define MMAP_SRAMCFG	(CONFIG_SYS_MBAR + 0x0001FF00)
+#define MMAP_SEC	(CONFIG_SYS_MBAR + 0x00020000)
 
+#include <asm/coldfire/dspi.h>
+#include <asm/coldfire/eport.h>
 #include <asm/coldfire/flexbus.h>
+#include <asm/coldfire/flexcan.h>
+#include <asm/coldfire/intctrl.h>
 
 typedef struct siu {
 	u32 mbar;		/* 0x00 */
@@ -98,37 +102,6 @@ typedef struct xlb_arb {
 	u32 pri;		/* 0x268 */
 } xlbarb_t;
 
-typedef struct int0_ctrl {
-	u32 iprh0;		/* 0x00 */
-	u32 iprl0;		/* 0x04 */
-	u32 imrh0;		/* 0x08 */
-	u32 imrl0;		/* 0x0C */
-	u32 frch0;		/* 0x10 */
-	u32 frcl0;		/* 0x14 */
-	u8 irlr;		/* 0x18 */
-	u8 iacklpr;		/* 0x19 */
-	u16 res1;		/* 0x1A - 0x1B */
-	u32 res2[9];		/* 0x1C - 0x3F */
-	u8 icr0[64];		/* 0x40 - 0x7F */
-	u32 res3[24];		/* 0x80 - 0xDF */
-	u8 swiack0;		/* 0xE0 */
-	u8 res4[3];		/* 0xE1 - 0xE3 */
-	u8 Lniack0_1;		/* 0xE4 */
-	u8 res5[3];		/* 0xE5 - 0xE7 */
-	u8 Lniack0_2;		/* 0xE8 */
-	u8 res6[3];		/* 0xE9 - 0xEB */
-	u8 Lniack0_3;		/* 0xEC */
-	u8 res7[3];		/* 0xED - 0xEF */
-	u8 Lniack0_4;		/* 0xF0 */
-	u8 res8[3];		/* 0xF1 - 0xF3 */
-	u8 Lniack0_5;		/* 0xF4 */
-	u8 res9[3];		/* 0xF5 - 0xF7 */
-	u8 Lniack0_6;		/* 0xF8 */
-	u8 resa[3];		/* 0xF9 - 0xFB */
-	u8 Lniack0_7;		/* 0xFC */
-	u8 resb[3];		/* 0xFD - 0xFF */
-} int0_t;
-
 typedef struct gptmr {
 	u8 ocpw;
 	u8 octict;
@@ -147,6 +120,11 @@ typedef struct gptmr {
 	u8 intr;		/* Interrupts */
 } gptmr_t;
 
+typedef struct canex_ctrl {
+	can_msg_t msg[16];	/* 0x00 Message Buffer 0-15 */
+} canex_t;
+
+
 typedef struct slt {
 	u32 tcnt;		/* 0x00 */
 	u32 cr;			/* 0x04 */
diff --git a/include/asm-m68k/io.h b/include/asm-m68k/io.h
index 1fccc1292..50ea08751 100644
--- a/include/asm-m68k/io.h
+++ b/include/asm-m68k/io.h
@@ -251,4 +251,9 @@ static inline void unmap_physmem(void *vaddr, unsigned long flags)
 
 }
 
+static inline phys_addr_t virt_to_phys(void * vaddr)
+{
+	return (phys_addr_t)(vaddr);
+}
+
 #endif				/* __ASM_M68K_IO_H__ */
diff --git a/include/asm-m68k/m5227x.h b/include/asm-m68k/m5227x.h
index afd31ba3c..824d33311 100644
--- a/include/asm-m68k/m5227x.h
+++ b/include/asm-m68k/m5227x.h
@@ -26,9 +26,7 @@
 #ifndef __MCF5227X__
 #define __MCF5227X__
 
-/*********************************************************************
-* Interrupt Controller (INTC)
-*********************************************************************/
+/* Interrupt Controller (INTC) */
 #define INT0_LO_RSVD0			(0)
 #define INT0_LO_EPORT1			(1)
 #define INT0_LO_EPORT4			(4)
@@ -98,235 +96,6 @@
 #define INT1_HI_TOUCH_ADC		(61)
 #define INT1_HI_PLL_LOCKS		(62)
 
-/* Bit definitions and macros for IPRH */
-#define INTC_IPRH_INT32			(0x00000001)
-#define INTC_IPRH_INT33			(0x00000002)
-#define INTC_IPRH_INT34			(0x00000004)
-#define INTC_IPRH_INT35			(0x00000008)
-#define INTC_IPRH_INT36			(0x00000010)
-#define INTC_IPRH_INT37			(0x00000020)
-#define INTC_IPRH_INT38			(0x00000040)
-#define INTC_IPRH_INT39			(0x00000080)
-#define INTC_IPRH_INT40			(0x00000100)
-#define INTC_IPRH_INT41			(0x00000200)
-#define INTC_IPRH_INT42			(0x00000400)
-#define INTC_IPRH_INT43			(0x00000800)
-#define INTC_IPRH_INT44			(0x00001000)
-#define INTC_IPRH_INT45			(0x00002000)
-#define INTC_IPRH_INT46			(0x00004000)
-#define INTC_IPRH_INT47			(0x00008000)
-#define INTC_IPRH_INT48			(0x00010000)
-#define INTC_IPRH_INT49			(0x00020000)
-#define INTC_IPRH_INT50			(0x00040000)
-#define INTC_IPRH_INT51			(0x00080000)
-#define INTC_IPRH_INT52			(0x00100000)
-#define INTC_IPRH_INT53			(0x00200000)
-#define INTC_IPRH_INT54			(0x00400000)
-#define INTC_IPRH_INT55			(0x00800000)
-#define INTC_IPRH_INT56			(0x01000000)
-#define INTC_IPRH_INT57			(0x02000000)
-#define INTC_IPRH_INT58			(0x04000000)
-#define INTC_IPRH_INT59			(0x08000000)
-#define INTC_IPRH_INT60			(0x10000000)
-#define INTC_IPRH_INT61			(0x20000000)
-#define INTC_IPRH_INT62			(0x40000000)
-#define INTC_IPRH_INT63			(0x80000000)
-
-/* Bit definitions and macros for IPRL */
-#define INTC_IPRL_INT0			(0x00000001)
-#define INTC_IPRL_INT1			(0x00000002)
-#define INTC_IPRL_INT2			(0x00000004)
-#define INTC_IPRL_INT3			(0x00000008)
-#define INTC_IPRL_INT4			(0x00000010)
-#define INTC_IPRL_INT5			(0x00000020)
-#define INTC_IPRL_INT6			(0x00000040)
-#define INTC_IPRL_INT7			(0x00000080)
-#define INTC_IPRL_INT8			(0x00000100)
-#define INTC_IPRL_INT9			(0x00000200)
-#define INTC_IPRL_INT10			(0x00000400)
-#define INTC_IPRL_INT11			(0x00000800)
-#define INTC_IPRL_INT12			(0x00001000)
-#define INTC_IPRL_INT13			(0x00002000)
-#define INTC_IPRL_INT14			(0x00004000)
-#define INTC_IPRL_INT15			(0x00008000)
-#define INTC_IPRL_INT16			(0x00010000)
-#define INTC_IPRL_INT17			(0x00020000)
-#define INTC_IPRL_INT18			(0x00040000)
-#define INTC_IPRL_INT19			(0x00080000)
-#define INTC_IPRL_INT20			(0x00100000)
-#define INTC_IPRL_INT21			(0x00200000)
-#define INTC_IPRL_INT22			(0x00400000)
-#define INTC_IPRL_INT23			(0x00800000)
-#define INTC_IPRL_INT24			(0x01000000)
-#define INTC_IPRL_INT25			(0x02000000)
-#define INTC_IPRL_INT26			(0x04000000)
-#define INTC_IPRL_INT27			(0x08000000)
-#define INTC_IPRL_INT28			(0x10000000)
-#define INTC_IPRL_INT29			(0x20000000)
-#define INTC_IPRL_INT30			(0x40000000)
-#define INTC_IPRL_INT31			(0x80000000)
-
-/* Bit definitions and macros for IMRH */
-#define INTC_IMRH_INT_MASK32		(0x00000001)
-#define INTC_IMRH_INT_MASK33		(0x00000002)
-#define INTC_IMRH_INT_MASK34		(0x00000004)
-#define INTC_IMRH_INT_MASK35		(0x00000008)
-#define INTC_IMRH_INT_MASK36		(0x00000010)
-#define INTC_IMRH_INT_MASK37		(0x00000020)
-#define INTC_IMRH_INT_MASK38		(0x00000040)
-#define INTC_IMRH_INT_MASK39		(0x00000080)
-#define INTC_IMRH_INT_MASK40		(0x00000100)
-#define INTC_IMRH_INT_MASK41		(0x00000200)
-#define INTC_IMRH_INT_MASK42		(0x00000400)
-#define INTC_IMRH_INT_MASK43		(0x00000800)
-#define INTC_IMRH_INT_MASK44		(0x00001000)
-#define INTC_IMRH_INT_MASK45		(0x00002000)
-#define INTC_IMRH_INT_MASK46		(0x00004000)
-#define INTC_IMRH_INT_MASK47		(0x00008000)
-#define INTC_IMRH_INT_MASK48		(0x00010000)
-#define INTC_IMRH_INT_MASK49		(0x00020000)
-#define INTC_IMRH_INT_MASK50		(0x00040000)
-#define INTC_IMRH_INT_MASK51		(0x00080000)
-#define INTC_IMRH_INT_MASK52		(0x00100000)
-#define INTC_IMRH_INT_MASK53		(0x00200000)
-#define INTC_IMRH_INT_MASK54		(0x00400000)
-#define INTC_IMRH_INT_MASK55		(0x00800000)
-#define INTC_IMRH_INT_MASK56		(0x01000000)
-#define INTC_IMRH_INT_MASK57		(0x02000000)
-#define INTC_IMRH_INT_MASK58		(0x04000000)
-#define INTC_IMRH_INT_MASK59		(0x08000000)
-#define INTC_IMRH_INT_MASK60		(0x10000000)
-#define INTC_IMRH_INT_MASK61		(0x20000000)
-#define INTC_IMRH_INT_MASK62		(0x40000000)
-#define INTC_IMRH_INT_MASK63		(0x80000000)
-
-/* Bit definitions and macros for IMRL */
-#define INTC_IMRL_INT_MASK0		(0x00000001)
-#define INTC_IMRL_INT_MASK1		(0x00000002)
-#define INTC_IMRL_INT_MASK2		(0x00000004)
-#define INTC_IMRL_INT_MASK3		(0x00000008)
-#define INTC_IMRL_INT_MASK4		(0x00000010)
-#define INTC_IMRL_INT_MASK5		(0x00000020)
-#define INTC_IMRL_INT_MASK6		(0x00000040)
-#define INTC_IMRL_INT_MASK7		(0x00000080)
-#define INTC_IMRL_INT_MASK8		(0x00000100)
-#define INTC_IMRL_INT_MASK9		(0x00000200)
-#define INTC_IMRL_INT_MASK10		(0x00000400)
-#define INTC_IMRL_INT_MASK11		(0x00000800)
-#define INTC_IMRL_INT_MASK12		(0x00001000)
-#define INTC_IMRL_INT_MASK13		(0x00002000)
-#define INTC_IMRL_INT_MASK14		(0x00004000)
-#define INTC_IMRL_INT_MASK15		(0x00008000)
-#define INTC_IMRL_INT_MASK16		(0x00010000)
-#define INTC_IMRL_INT_MASK17		(0x00020000)
-#define INTC_IMRL_INT_MASK18		(0x00040000)
-#define INTC_IMRL_INT_MASK19		(0x00080000)
-#define INTC_IMRL_INT_MASK20		(0x00100000)
-#define INTC_IMRL_INT_MASK21		(0x00200000)
-#define INTC_IMRL_INT_MASK22		(0x00400000)
-#define INTC_IMRL_INT_MASK23		(0x00800000)
-#define INTC_IMRL_INT_MASK24		(0x01000000)
-#define INTC_IMRL_INT_MASK25		(0x02000000)
-#define INTC_IMRL_INT_MASK26		(0x04000000)
-#define INTC_IMRL_INT_MASK27		(0x08000000)
-#define INTC_IMRL_INT_MASK28		(0x10000000)
-#define INTC_IMRL_INT_MASK29		(0x20000000)
-#define INTC_IMRL_INT_MASK30		(0x40000000)
-#define INTC_IMRL_INT_MASK31		(0x80000000)
-
-/* Bit definitions and macros for INTFRCH */
-#define INTC_INTFRCH_INTFRC32		(0x00000001)
-#define INTC_INTFRCH_INTFRC33		(0x00000002)
-#define INTC_INTFRCH_INTFRC34		(0x00000004)
-#define INTC_INTFRCH_INTFRC35		(0x00000008)
-#define INTC_INTFRCH_INTFRC36		(0x00000010)
-#define INTC_INTFRCH_INTFRC37		(0x00000020)
-#define INTC_INTFRCH_INTFRC38		(0x00000040)
-#define INTC_INTFRCH_INTFRC39		(0x00000080)
-#define INTC_INTFRCH_INTFRC40		(0x00000100)
-#define INTC_INTFRCH_INTFRC41		(0x00000200)
-#define INTC_INTFRCH_INTFRC42		(0x00000400)
-#define INTC_INTFRCH_INTFRC43		(0x00000800)
-#define INTC_INTFRCH_INTFRC44		(0x00001000)
-#define INTC_INTFRCH_INTFRC45		(0x00002000)
-#define INTC_INTFRCH_INTFRC46		(0x00004000)
-#define INTC_INTFRCH_INTFRC47		(0x00008000)
-#define INTC_INTFRCH_INTFRC48		(0x00010000)
-#define INTC_INTFRCH_INTFRC49		(0x00020000)
-#define INTC_INTFRCH_INTFRC50		(0x00040000)
-#define INTC_INTFRCH_INTFRC51		(0x00080000)
-#define INTC_INTFRCH_INTFRC52		(0x00100000)
-#define INTC_INTFRCH_INTFRC53		(0x00200000)
-#define INTC_INTFRCH_INTFRC54		(0x00400000)
-#define INTC_INTFRCH_INTFRC55		(0x00800000)
-#define INTC_INTFRCH_INTFRC56		(0x01000000)
-#define INTC_INTFRCH_INTFRC57		(0x02000000)
-#define INTC_INTFRCH_INTFRC58		(0x04000000)
-#define INTC_INTFRCH_INTFRC59		(0x08000000)
-#define INTC_INTFRCH_INTFRC60		(0x10000000)
-#define INTC_INTFRCH_INTFRC61		(0x20000000)
-#define INTC_INTFRCH_INTFRC62		(0x40000000)
-#define INTC_INTFRCH_INTFRC63		(0x80000000)
-
-/* Bit definitions and macros for INTFRCL */
-#define INTC_INTFRCL_INTFRC0		(0x00000001)
-#define INTC_INTFRCL_INTFRC1		(0x00000002)
-#define INTC_INTFRCL_INTFRC2		(0x00000004)
-#define INTC_INTFRCL_INTFRC3		(0x00000008)
-#define INTC_INTFRCL_INTFRC4		(0x00000010)
-#define INTC_INTFRCL_INTFRC5		(0x00000020)
-#define INTC_INTFRCL_INTFRC6		(0x00000040)
-#define INTC_INTFRCL_INTFRC7		(0x00000080)
-#define INTC_INTFRCL_INTFRC8		(0x00000100)
-#define INTC_INTFRCL_INTFRC9		(0x00000200)
-#define INTC_INTFRCL_INTFRC10		(0x00000400)
-#define INTC_INTFRCL_INTFRC11		(0x00000800)
-#define INTC_INTFRCL_INTFRC12		(0x00001000)
-#define INTC_INTFRCL_INTFRC13		(0x00002000)
-#define INTC_INTFRCL_INTFRC14		(0x00004000)
-#define INTC_INTFRCL_INTFRC15		(0x00008000)
-#define INTC_INTFRCL_INTFRC16		(0x00010000)
-#define INTC_INTFRCL_INTFRC17		(0x00020000)
-#define INTC_INTFRCL_INTFRC18		(0x00040000)
-#define INTC_INTFRCL_INTFRC19		(0x00080000)
-#define INTC_INTFRCL_INTFRC20		(0x00100000)
-#define INTC_INTFRCL_INTFRC21		(0x00200000)
-#define INTC_INTFRCL_INTFRC22		(0x00400000)
-#define INTC_INTFRCL_INTFRC23		(0x00800000)
-#define INTC_INTFRCL_INTFRC24		(0x01000000)
-#define INTC_INTFRCL_INTFRC25		(0x02000000)
-#define INTC_INTFRCL_INTFRC26		(0x04000000)
-#define INTC_INTFRCL_INTFRC27		(0x08000000)
-#define INTC_INTFRCL_INTFRC28		(0x10000000)
-#define INTC_INTFRCL_INTFRC29		(0x20000000)
-#define INTC_INTFRCL_INTFRC30		(0x40000000)
-#define INTC_INTFRCL_INTFRC31		(0x80000000)
-
-/* Bit definitions and macros for ICONFIG */
-#define INTC_ICONFIG_EMASK		(0x0020)
-#define INTC_ICONFIG_ELVLPRI1		(0x0200)
-#define INTC_ICONFIG_ELVLPRI2		(0x0400)
-#define INTC_ICONFIG_ELVLPRI3		(0x0800)
-#define INTC_ICONFIG_ELVLPRI4		(0x1000)
-#define INTC_ICONFIG_ELVLPRI5		(0x2000)
-#define INTC_ICONFIG_ELVLPRI6		(0x4000)
-#define INTC_ICONFIG_ELVLPRI7		(0x8000)
-
-/* Bit definitions and macros for SIMR */
-#define INTC_SIMR_SIMR(x)		(((x)&0x7F))
-
-/* Bit definitions and macros for CIMR */
-#define INTC_CIMR_CIMR(x)		(((x)&0x7F))
-
-/* Bit definitions and macros for CLMASK */
-#define INTC_CLMASK_CLMASK(x)		(((x)&0x0F))
-
-/* Bit definitions and macros for SLMASK */
-#define INTC_SLMASK_SLMASK(x)		(((x)&0x0F))
-
-/* Bit definitions and macros for ICR group */
-#define INTC_ICR_IL(x)			(((x)&0x07))
-
 /*********************************************************************
 * Reset Controller Module (RCM)
 *********************************************************************/
@@ -513,8 +282,8 @@
 
 /* Bit definitions and macros for PAR_DSPI */
 #define GPIO_PAR_DSPI_PCS0_MASK		(0x3F)
-#define GPIO_PAR_DSPI_PCS0_PCS0		(0x80)
-#define GPIO_PAR_DSPI_PCS0_U2RTS	(0x40)
+#define GPIO_PAR_DSPI_PCS0_PCS0		(0xC0)
+#define GPIO_PAR_DSPI_PCS0_U2RTS	(0x80)
 #define GPIO_PAR_DSPI_PCS0_GPIO		(0x00)
 #define GPIO_PAR_DSPI_SIN_MASK		(0xCF)
 #define GPIO_PAR_DSPI_SIN_SIN		(0x30)
diff --git a/include/asm-m68k/m5235.h b/include/asm-m68k/m5235.h
index b98b452ca..22987ac77 100644
--- a/include/asm-m68k/m5235.h
+++ b/include/asm-m68k/m5235.h
@@ -163,94 +163,6 @@
 #define SDRAMC_DMRn_V			(0x00000001)
 
 /*********************************************************************
-* FlexBus Chip Selects (FBCS)
-*********************************************************************/
-/* Bit definitions and macros for FBCS_CSMR */
-#define FBCS_CSMR_BAM(x)		(((x)&0xFFFF)<<16)
-#define FBCS_CSMR_BAM_4G		(0xFFFF0000)
-#define FBCS_CSMR_BAM_2G		(0x7FFF0000)
-#define FBCS_CSMR_BAM_1G		(0x3FFF0000)
-#define FBCS_CSMR_BAM_1024M		(0x3FFF0000)
-#define FBCS_CSMR_BAM_512M		(0x1FFF0000)
-#define FBCS_CSMR_BAM_256M		(0x0FFF0000)
-#define FBCS_CSMR_BAM_128M		(0x07FF0000)
-#define FBCS_CSMR_BAM_64M		(0x03FF0000)
-#define FBCS_CSMR_BAM_32M		(0x01FF0000)
-#define FBCS_CSMR_BAM_16M		(0x00FF0000)
-#define FBCS_CSMR_BAM_8M		(0x007F0000)
-#define FBCS_CSMR_BAM_4M		(0x003F0000)
-#define FBCS_CSMR_BAM_2M		(0x001F0000)
-#define FBCS_CSMR_BAM_1M		(0x000F0000)
-#define FBCS_CSMR_BAM_1024K		(0x000F0000)
-#define FBCS_CSMR_BAM_512K		(0x00070000)
-#define FBCS_CSMR_BAM_256K		(0x00030000)
-#define FBCS_CSMR_BAM_128K		(0x00010000)
-#define FBCS_CSMR_BAM_64K		(0x00000000)
-#define FBCS_CSMR_WP			(0x00000100)
-#define FBCS_CSMR_V			(0x00000001)
-
-/* Bit definitions and macros for FBCS_CSCR */
-#define FBCS_CSCR_SRWS(x)		(((x)&0x03)<<14)
-#define FBCS_CSCR_IWS(x)		(((x)&0x0F)<<10)
-#define FBCS_CSCR_AA			(0x0100)
-#define FBCS_CSCR_PS_MASK		(0x00C0)
-#define FBCS_CSCR_PS_32			(0x0000)
-#define FBCS_CSCR_PS_16			(0x0080)
-#define FBCS_CSCR_PS_8			(0x0040)
-#define FBCS_CSCR_BEM			(0x0020)
-#define FBCS_CSCR_BSTR			(0x0010)
-#define FBCS_CSCR_BSTW			(0x0008)
-#define FBCS_CSCR_SWWS(x)		((x)&0x07)
-
-/*********************************************************************
-* Queued Serial Peripheral Interface (QSPI)
-*********************************************************************/
-/* Bit definitions and macros for QSPI_QMR */
-#define QSPI_QMR_MSTR			(0x8000)
-#define QSPI_QMR_DOHIE			(0x4000)
-#define QSPI_QMR_BITS(x)		(((x)&0x000F)<<10)
-#define QSPI_QMR_CPOL			(0x0200)
-#define QSPI_QMR_CPHA			(0x0100)
-#define QSPI_QMR_BAUD(x)		((x)&0x00FF)
-
-/* Bit definitions and macros for QSPI_QDLYR */
-#define QSPI_QDLYR_SPE			(0x8000)
-#define QSPI_QDLYR_QCD(x)		(((x)&0x007F)<<8)
-#define QSPI_QDLYR_DTL(x)		((x)&0x00FF)
-
-/* Bit definitions and macros for QSPI_QWR */
-#define QSPI_QWR_HALT			(0x8000)
-#define QSPI_QWR_WREN			(0x4000)
-#define QSPI_QWR_WRTO			(0x2000)
-#define QSPI_QWR_CSIV			(0x1000)
-#define QSPI_QWR_ENDQP(x)		(((x)&0x000F)<<8)
-#define QSPI_QWR_NEWQP(x)		((x)&0x000F)
-
-/* Bit definitions and macros for QSPI_QIR */
-#define QSPI_QIR_WCEFB			(0x8000)
-#define QSPI_QIR_ABRTB			(0x4000)
-#define QSPI_QIR_ABRTL			(0x1000)
-#define QSPI_QIR_WCEFE			(0x0800)
-#define QSPI_QIR_ABRTE			(0x0400)
-#define QSPI_QIR_SPIFE			(0x0100)
-#define QSPI_QIR_WCEF			(0x0008)
-#define QSPI_QIR_ABRT			(0x0004)
-#define QSPI_QIR_SPIF			(0x0001)
-
-/* Bit definitions and macros for QSPI_QAR */
-#define QSPI_QAR_ADDR(x)		((x)&0x003F)
-
-/* Bit definitions and macros for QSPI_QDR */
-#define QSPI_QDR_CONT			(0x8000)
-#define QSPI_QDR_BITSE			(0x4000)
-#define QSPI_QDR_DT			(0x2000)
-#define QSPI_QDR_DSCK			(0x1000)
-#define QSPI_QDR_QSPI_CS3		(0x0800)
-#define QSPI_QDR_QSPI_CS2		(0x0400)
-#define QSPI_QDR_QSPI_CS1		(0x0200)
-#define QSPI_QDR_QSPI_CS0		(0x0100)
-
-/*********************************************************************
 * Interrupt Controller (INTC)
 *********************************************************************/
 #define INT0_LO_RSVD0			(0)
@@ -370,85 +282,6 @@
 #define INT1_HI_ETPU_TC31F		(58)
 #define INT1_HI_ETPU_TGIF		(59)
 
-/* Bit definitions and macros for INTC_IPRH */
-#define INTC_IPRH_INT63			(0x80000000)
-#define INTC_IPRH_INT62			(0x40000000)
-#define INTC_IPRH_INT61			(0x20000000)
-#define INTC_IPRH_INT60			(0x10000000)
-#define INTC_IPRH_INT59			(0x08000000)
-#define INTC_IPRH_INT58			(0x04000000)
-#define INTC_IPRH_INT57			(0x02000000)
-#define INTC_IPRH_INT56			(0x01000000)
-#define INTC_IPRH_INT55			(0x00800000)
-#define INTC_IPRH_INT54			(0x00400000)
-#define INTC_IPRH_INT53			(0x00200000)
-#define INTC_IPRH_INT52			(0x00100000)
-#define INTC_IPRH_INT51			(0x00080000)
-#define INTC_IPRH_INT50			(0x00040000)
-#define INTC_IPRH_INT49			(0x00020000)
-#define INTC_IPRH_INT48			(0x00010000)
-#define INTC_IPRH_INT47			(0x00008000)
-#define INTC_IPRH_INT46			(0x00004000)
-#define INTC_IPRH_INT45			(0x00002000)
-#define INTC_IPRH_INT44			(0x00001000)
-#define INTC_IPRH_INT43			(0x00000800)
-#define INTC_IPRH_INT42			(0x00000400)
-#define INTC_IPRH_INT41			(0x00000200)
-#define INTC_IPRH_INT40			(0x00000100)
-#define INTC_IPRH_INT39			(0x00000080)
-#define INTC_IPRH_INT38			(0x00000040)
-#define INTC_IPRH_INT37			(0x00000020)
-#define INTC_IPRH_INT36			(0x00000010)
-#define INTC_IPRH_INT35			(0x00000008)
-#define INTC_IPRH_INT34			(0x00000004)
-#define INTC_IPRH_INT33			(0x00000002)
-#define INTC_IPRH_INT32			(0x00000001)
-
-/* Bit definitions and macros for INTC_IPRL */
-#define INTC_IPRL_INT31			(0x80000000)
-#define INTC_IPRL_INT30			(0x40000000)
-#define INTC_IPRL_INT29			(0x20000000)
-#define INTC_IPRL_INT28			(0x10000000)
-#define INTC_IPRL_INT27			(0x08000000)
-#define INTC_IPRL_INT26			(0x04000000)
-#define INTC_IPRL_INT25			(0x02000000)
-#define INTC_IPRL_INT24			(0x01000000)
-#define INTC_IPRL_INT23			(0x00800000)
-#define INTC_IPRL_INT22			(0x00400000)
-#define INTC_IPRL_INT21			(0x00200000)
-#define INTC_IPRL_INT20			(0x00100000)
-#define INTC_IPRL_INT19			(0x00080000)
-#define INTC_IPRL_INT18			(0x00040000)
-#define INTC_IPRL_INT17			(0x00020000)
-#define INTC_IPRL_INT16			(0x00010000)
-#define INTC_IPRL_INT15			(0x00008000)
-#define INTC_IPRL_INT14			(0x00004000)
-#define INTC_IPRL_INT13			(0x00002000)
-#define INTC_IPRL_INT12			(0x00001000)
-#define INTC_IPRL_INT11			(0x00000800)
-#define INTC_IPRL_INT10			(0x00000400)
-#define INTC_IPRL_INT9			(0x00000200)
-#define INTC_IPRL_INT8			(0x00000100)
-#define INTC_IPRL_INT7			(0x00000080)
-#define INTC_IPRL_INT6			(0x00000040)
-#define INTC_IPRL_INT5			(0x00000020)
-#define INTC_IPRL_INT4			(0x00000010)
-#define INTC_IPRL_INT3			(0x00000008)
-#define INTC_IPRL_INT2			(0x00000004)
-#define INTC_IPRL_INT1			(0x00000002)
-#define INTC_IPRL_INT0			(0x00000001)
-
-/* Bit definitions and macros for INTC_IRLR */
-#define INTC_IRLRn(x)			(((x)&0x7F)<<1)
-
-/* Bit definitions and macros for INTC_IACKLPRn */
-#define INTC_IACKLPRn_LEVEL(x)		(((x)&0x07)<<4)
-#define INTC_IACKLPRn_PRI(x)		((x)&0x0F)
-
-/* Bit definitions and macros for INTC_ICRnx */
-#define INTC_ICRnx_IL(x)		(((x)&0x07)<<3)
-#define INTC_ICRnx_IP(x)		((x)&0x07)
-
 /*********************************************************************
 * General Purpose I/O (GPIO)
 *********************************************************************/
@@ -758,49 +591,6 @@
 #define PLL_SYNSR_CALPASS		(0x00000001)
 
 /*********************************************************************
- * Edge Port
-*********************************************************************/
-#define EPORT_EPPAR_EPPA7(x)		(((x)&0x03)<<14)
-#define EPORT_EPPAR_EPPA6(x)		(((x)&0x03)<<12)
-#define EPORT_EPPAR_EPPA5(x)		(((x)&0x03)<<10)
-#define EPORT_EPPAR_EPPA4(x)		(((x)&0x03)<<8)
-#define EPORT_EPPAR_EPPA3(x)		(((x)&0x03)<<6)
-#define EPORT_EPPAR_EPPA2(x)		(((x)&0x03)<<4)
-#define EPORT_EPPAR_EPPA1(x)		(((x)&0x03)<<2)
-
-#define EPORT_EPDDR_EPDD7(x)		EPORT_EPPAR_EPPA7(x)
-#define EPORT_EPDDR_EPDD6(x)		EPORT_EPPAR_EPPA6(x)
-#define EPORT_EPDDR_EPDD5(x)		EPORT_EPPAR_EPPA5(x)
-#define EPORT_EPDDR_EPDD4(x)		EPORT_EPPAR_EPPA4(x)
-#define EPORT_EPDDR_EPDD3(x)		EPORT_EPPAR_EPPA3(x)
-#define EPORT_EPDDR_EPDD2(x)		EPORT_EPPAR_EPPA2(x)
-#define EPORT_EPDDR_EPDD1(x)		EPORT_EPPAR_EPPA1(x)
-
-#define EPORT_EPIER_EPIE7		(0x80)
-#define EPORT_EPIER_EPIE6		(0x40)
-#define EPORT_EPIER_EPIE5		(0x20)
-#define EPORT_EPIER_EPIE4		(0x10)
-#define EPORT_EPIER_EPIE3		(0x08)
-#define EPORT_EPIER_EPIE2		(0x04)
-#define EPORT_EPIER_EPIE1		(0x02)
-
-#define EPORT_EPDR_EPDR7		EPORT_EPIER_EPIE7
-#define EPORT_EPDR_EPDR6		EPORT_EPIER_EPIE6
-#define EPORT_EPDR_EPDR5		EPORT_EPIER_EPIE5
-#define EPORT_EPDR_EPDR4		EPORT_EPIER_EPIE4
-#define EPORT_EPDR_EPDR3		EPORT_EPIER_EPIE3
-#define EPORT_EPDR_EPDR2		EPORT_EPIER_EPIE2
-#define EPORT_EPDR_EPDR1		EPORT_EPIER_EPIE1
-
-#define EPORT_EPPDR_EPPDR7		EPORT_EPIER_EPIE7
-#define EPORT_EPPDR_EPPDR6		EPORT_EPIER_EPIE6
-#define EPORT_EPPDR_EPPDR5		EPORT_EPIER_EPIE5
-#define EPORT_EPPDR_EPPDR4		EPORT_EPIER_EPIE4
-#define EPORT_EPPDR_EPPDR3		EPORT_EPIER_EPIE3
-#define EPORT_EPPDR_EPPDR2		EPORT_EPIER_EPIE2
-#define EPORT_EPPDR_EPPDR1		EPORT_EPIER_EPIE1
-
-/*********************************************************************
 * Watchdog Timer Modules (WTM)
 *********************************************************************/
 /* Bit definitions and macros for WTM_WCR */
@@ -809,97 +599,4 @@
 #define WTM_WCR_HALTED			(0x0002)
 #define WTM_WCR_EN			(0x0001)
 
-/*********************************************************************
-* FlexCAN Module (CAN)
-*********************************************************************/
-/* Bit definitions and macros for CAN_CANMCR */
-#define CANMCR_MDIS			(0x80000000)
-#define CANMCR_FRZ			(0x40000000)
-#define CANMCR_HALT			(0x10000000)
-#define CANMCR_NORDY			(0x08000000)
-#define CANMCR_SOFTRST			(0x02000000)
-#define CANMCR_FRZACK			(0x01000000)
-#define CANMCR_SUPV			(0x00800000)
-#define CANMCR_LPMACK			(0x00100000)
-#define CANMCR_MAXMB(x)			(((x)&0x0F))
-
-/* Bit definitions and macros for CAN_CANCTRL */
-#define CANCTRL_PRESDIV(x)		(((x)&0xFF)<<24)
-#define CANCTRL_RJW(x)			(((x)&0x03)<<22)
-#define CANCTRL_PSEG1(x)		(((x)&0x07)<<19)
-#define CANCTRL_PSEG2(x)		(((x)&0x07)<<16)
-#define CANCTRL_BOFFMSK			(0x00008000)
-#define CANCTRL_ERRMSK			(0x00004000)
-#define CANCTRL_CLKSRC			(0x00002000)
-#define CANCTRL_LPB			(0x00001000)
-#define CANCTRL_SMP			(0x00000080)
-#define CANCTRL_BOFFREC			(0x00000040)
-#define CANCTRL_TSYNC			(0x00000020)
-#define CANCTRL_LBUF			(0x00000010)
-#define CANCTRL_LOM			(0x00000008)
-#define CANCTRL_PROPSEG(x)		(((x)&0x07))
-
-/* Bit definitions and macros for CAN_TIMER */
-#define TIMER_TIMER(x)			((x)&0xFFFF)
-
-/* Bit definitions and macros for CAN_RXGMASK */
-#define RXGMASK_MI(x)			((x)&0x1FFFFFFF)
-
-/* Bit definitions and macros for CAN_ERRCNT */
-#define ERRCNT_TXECTR(x)		(((x)&0xFF))
-#define ERRCNT_RXECTR(x)		(((x)&0xFF)<<8)
-
-/* Bit definitions and macros for CAN_ERRSTAT */
-#define ERRSTAT_BITERR1			(0x00008000)
-#define ERRSTAT_BITERR0			(0x00004000)
-#define ERRSTAT_ACKERR			(0x00002000)
-#define ERRSTAT_CRCERR			(0x00001000)
-#define ERRSTAT_FRMERR			(0x00000800)
-#define ERRSTAT_STFERR			(0x00000400)
-#define ERRSTAT_TXWRN			(0x00000200)
-#define ERRSTAT_RXWRN			(0x00000100)
-#define ERRSTAT_IDLE			(0x00000080)
-#define ERRSTAT_TXRX			(0x00000040)
-#define ERRSTAT_FLT_BUSOFF		(0x00000020)
-#define ERRSTAT_FLT_PASSIVE		(0x00000010)
-#define ERRSTAT_FLT_ACTIVE		(0x00000000)
-#define ERRSTAT_BOFFINT			(0x00000004)
-#define ERRSTAT_ERRINT			(0x00000002)
-
-/* Bit definitions and macros for CAN_IMASK */
-#define IMASK_BUF15M			(0x00008000)
-#define IMASK_BUF14M			(0x00004000)
-#define IMASK_BUF13M			(0x00002000)
-#define IMASK_BUF12M			(0x00001000)
-#define IMASK_BUF11M			(0x00000800)
-#define IMASK_BUF10M			(0x00000400)
-#define IMASK_BUF9M			(0x00000200)
-#define IMASK_BUF8M			(0x00000100)
-#define IMASK_BUF7M			(0x00000080)
-#define IMASK_BUF6M			(0x00000040)
-#define IMASK_BUF5M			(0x00000020)
-#define IMASK_BUF4M			(0x00000010)
-#define IMASK_BUF3M			(0x00000008)
-#define IMASK_BUF2M			(0x00000004)
-#define IMASK_BUF1M			(0x00000002)
-#define IMASK_BUF0M			(0x00000001)
-
-/* Bit definitions and macros for CAN_IFLAG */
-#define IFLAG_BUF15I			(0x00008000)
-#define IFLAG_BUF14I			(0x00004000)
-#define IFLAG_BUF13I			(0x00002000)
-#define IFLAG_BUF12I			(0x00001000)
-#define IFLAG_BUF11I			(0x00000800)
-#define IFLAG_BUF10I			(0x00000400)
-#define IFLAG_BUF9I			(0x00000200)
-#define IFLAG_BUF8I			(0x00000100)
-#define IFLAG_BUF7I			(0x00000080)
-#define IFLAG_BUF6I			(0x00000040)
-#define IFLAG_BUF5I			(0x00000020)
-#define IFLAG_BUF4I			(0x00000010)
-#define IFLAG_BUF3I			(0x00000008)
-#define IFLAG_BUF2I			(0x00000004)
-#define IFLAG_BUF1I			(0x00000002)
-#define IFLAG_BUF0I			(0x00000001)
-
 #endif				/* mcf5235_h */
diff --git a/include/asm-m68k/m5249.h b/include/asm-m68k/m5249.h
index facf0c909..fa0cb14da 100644
--- a/include/asm-m68k/m5249.h
+++ b/include/asm-m68k/m5249.h
@@ -31,14 +31,14 @@
 /*
  * useful definitions for reading/writing MBAR offset memory
  */
-#define mbar_readLong(x)	*((volatile unsigned long *) (CFG_MBAR + x))
-#define mbar_writeLong(x,y)	*((volatile unsigned long *) (CFG_MBAR + x)) = y
-#define mbar_writeShort(x,y)	*((volatile unsigned short *) (CFG_MBAR + x)) = y
-#define mbar_writeByte(x,y)	*((volatile unsigned char *) (CFG_MBAR + x)) = y
-#define mbar2_readLong(x)	*((volatile unsigned long *) (CFG_MBAR2 + x))
-#define mbar2_writeLong(x,y)	*((volatile unsigned long *) (CFG_MBAR2 + x)) = y
-#define mbar2_writeShort(x,y)	*((volatile unsigned short *) (CFG_MBAR2 + x)) = y
-#define mbar2_writeByte(x,y)	*((volatile unsigned char *) (CFG_MBAR2 + x)) = y
+#define mbar_readLong(x)	*((volatile unsigned long *) (CONFIG_SYS_MBAR + x))
+#define mbar_writeLong(x,y)	*((volatile unsigned long *) (CONFIG_SYS_MBAR + x)) = y
+#define mbar_writeShort(x,y)	*((volatile unsigned short *) (CONFIG_SYS_MBAR + x)) = y
+#define mbar_writeByte(x,y)	*((volatile unsigned char *) (CONFIG_SYS_MBAR + x)) = y
+#define mbar2_readLong(x)	*((volatile unsigned long *) (CONFIG_SYS_MBAR2 + x))
+#define mbar2_writeLong(x,y)	*((volatile unsigned long *) (CONFIG_SYS_MBAR2 + x)) = y
+#define mbar2_writeShort(x,y)	*((volatile unsigned short *) (CONFIG_SYS_MBAR2 + x)) = y
+#define mbar2_writeByte(x,y)	*((volatile unsigned char *) (CONFIG_SYS_MBAR2 + x)) = y
 
 /*
  * Size of internal RAM
@@ -77,19 +77,6 @@
 #define MCFSIM_IPR		0x40	/* Interrupt Pend reg (r/w) */
 #define MCFSIM_IMR		0x44	/* Interrupt Mask reg (r/w) */
 
-#define MCFSIM_CSAR0		0x80	/* CS 0 Address 0 reg (r/w) */
-#define MCFSIM_CSMR0		0x84	/* CS 0 Mask 0 reg (r/w) */
-#define MCFSIM_CSCR0		0x8a	/* CS 0 Control reg (r/w) */
-#define MCFSIM_CSAR1		0x8c	/* CS 1 Address reg (r/w) */
-#define MCFSIM_CSMR1		0x90	/* CS 1 Mask reg (r/w) */
-#define MCFSIM_CSCR1		0x96	/* CS 1 Control reg (r/w) */
-#define MCFSIM_CSAR2		0x98	/* CS 2 Address reg (r/w) */
-#define MCFSIM_CSMR2		0x9c	/* CS 2 Mask reg (r/w) */
-#define MCFSIM_CSCR2		0xa2	/* CS 2 Control reg (r/w) */
-#define MCFSIM_CSAR3		0xa4	/* CS 3 Address reg (r/w) */
-#define MCFSIM_CSMR3		0xa8	/* CS 3 Mask reg (r/w) */
-#define MCFSIM_CSCR3		0xae	/* CS 3 Control reg (r/w) */
-
 #define MCFSIM_DCR		0x100	/* DRAM Control reg (r/w) */
 #define MCFSIM_DACR0		0x108	/* DRAM 0 Addr and Ctrl (r/w) */
 #define MCFSIM_DMR0		0x10c	/* DRAM 0 Mask reg (r/w) */
diff --git a/include/asm-m68k/m5271.h b/include/asm-m68k/m5271.h
index be343987f..787761689 100644
--- a/include/asm-m68k/m5271.h
+++ b/include/asm-m68k/m5271.h
@@ -28,12 +28,12 @@
 #ifndef	_MCF5271_H_
 #define	_MCF5271_H_
 
-#define mbar_readLong(x)	*((volatile unsigned long *) (CFG_MBAR + x))
-#define mbar_readShort(x)	*((volatile unsigned short *) (CFG_MBAR + x))
-#define mbar_readByte(x)	*((volatile unsigned char *) (CFG_MBAR + x))
-#define mbar_writeLong(x,y)	*((volatile unsigned long *) (CFG_MBAR + x)) = y
-#define mbar_writeShort(x,y)	*((volatile unsigned short *) (CFG_MBAR + x)) = y
-#define mbar_writeByte(x,y)	*((volatile unsigned char *) (CFG_MBAR + x)) = y
+#define mbar_readLong(x)	*((volatile unsigned long *) (CONFIG_SYS_MBAR + x))
+#define mbar_readShort(x)	*((volatile unsigned short *) (CONFIG_SYS_MBAR + x))
+#define mbar_readByte(x)	*((volatile unsigned char *) (CONFIG_SYS_MBAR + x))
+#define mbar_writeLong(x,y)	*((volatile unsigned long *) (CONFIG_SYS_MBAR + x)) = y
+#define mbar_writeShort(x,y)	*((volatile unsigned short *) (CONFIG_SYS_MBAR + x)) = y
+#define mbar_writeByte(x,y)	*((volatile unsigned char *) (CONFIG_SYS_MBAR + x)) = y
 
 #define MCF_FMPLL_SYNCR				0x120000
 #define MCF_FMPLL_SYNSR				0x120004
@@ -116,9 +116,7 @@
 
 #define MCFSIM_ICR1				0x000C41
 
-/*********************************************************************
-* Interrupt Controller (INTC)
-*********************************************************************/
+/* Interrupt Controller (INTC) */
 #define INT0_LO_RSVD0			(0)
 #define INT0_LO_EPORT1			(1)
 #define INT0_LO_EPORT2			(2)
@@ -182,38 +180,4 @@
 #define INT0_HI_CAN1_BOFFINT		(60)
 /* 60-63 Reserved */
 
-/* Bit definitions and macros for INTC_IPRL */
-#define INTC_IPRL_INT31			(0x80000000)
-#define INTC_IPRL_INT30			(0x40000000)
-#define INTC_IPRL_INT29			(0x20000000)
-#define INTC_IPRL_INT28			(0x10000000)
-#define INTC_IPRL_INT27			(0x08000000)
-#define INTC_IPRL_INT26			(0x04000000)
-#define INTC_IPRL_INT25			(0x02000000)
-#define INTC_IPRL_INT24			(0x01000000)
-#define INTC_IPRL_INT23			(0x00800000)
-#define INTC_IPRL_INT22			(0x00400000)
-#define INTC_IPRL_INT21			(0x00200000)
-#define INTC_IPRL_INT20			(0x00100000)
-#define INTC_IPRL_INT19			(0x00080000)
-#define INTC_IPRL_INT18			(0x00040000)
-#define INTC_IPRL_INT17			(0x00020000)
-#define INTC_IPRL_INT16			(0x00010000)
-#define INTC_IPRL_INT15			(0x00008000)
-#define INTC_IPRL_INT14			(0x00004000)
-#define INTC_IPRL_INT13			(0x00002000)
-#define INTC_IPRL_INT12			(0x00001000)
-#define INTC_IPRL_INT11			(0x00000800)
-#define INTC_IPRL_INT10			(0x00000400)
-#define INTC_IPRL_INT9			(0x00000200)
-#define INTC_IPRL_INT8			(0x00000100)
-#define INTC_IPRL_INT7			(0x00000080)
-#define INTC_IPRL_INT6			(0x00000040)
-#define INTC_IPRL_INT5			(0x00000020)
-#define INTC_IPRL_INT4			(0x00000010)
-#define INTC_IPRL_INT3			(0x00000008)
-#define INTC_IPRL_INT2			(0x00000004)
-#define INTC_IPRL_INT1			(0x00000002)
-#define INTC_IPRL_INT0			(0x00000001)
-
 #endif				/* _MCF5271_H_ */
diff --git a/include/asm-m68k/m5275.h b/include/asm-m68k/m5275.h
index 89c6c9259..24dbae253 100644
--- a/include/asm-m68k/m5275.h
+++ b/include/asm-m68k/m5275.h
@@ -30,18 +30,6 @@
  * Define the 5275 SIM register set addresses. These are similar,
  * but not quite identical to the 5282 registers and offsets.
  */
-#define	MCFICM_INTC0		0x0c00		/* Base for Interrupt Ctrl 0 */
-#define	MCFICM_INTC1		0x0d00		/* Base for Interrupt Ctrl 1 */
-#define	MCFINTC_IPRH		0x00		/* Interrupt pending 32-63 */
-#define	MCFINTC_IPRL		0x04		/* Interrupt pending 1-31 */
-#define	MCFINTC_IMRH		0x08		/* Interrupt mask 32-63 */
-#define	MCFINTC_IMRL		0x0c		/* Interrupt mask 1-31 */
-#define	MCFINTC_INTFRCH		0x10		/* Interrupt force 32-63 */
-#define	MCFINTC_INTFRCL		0x14		/* Interrupt force 1-31 */
-#define	MCFINTC_IRLR		0x18		/* */
-#define	MCFINTC_IACKL		0x19		/* */
-#define	MCFINTC_ICR0		0x40		/* Base ICR register */
-
 #define MCF_GPIO_PAR_UART	0x10007c
 #define UART0_ENABLE_MASK	0x000f
 #define UART1_ENABLE_MASK	0x00f0
@@ -198,40 +186,6 @@
 #define INT1_HI_FEC1_BABR	(35)
 /* 36-63 Reserved */
 
-/* Bit definitions and macros for INTC_IPRL */
-#define INTC_IPRL_INT31		(0x80000000)
-#define INTC_IPRL_INT30		(0x40000000)
-#define INTC_IPRL_INT29		(0x20000000)
-#define INTC_IPRL_INT28		(0x10000000)
-#define INTC_IPRL_INT27		(0x08000000)
-#define INTC_IPRL_INT26		(0x04000000)
-#define INTC_IPRL_INT25		(0x02000000)
-#define INTC_IPRL_INT24		(0x01000000)
-#define INTC_IPRL_INT23		(0x00800000)
-#define INTC_IPRL_INT22		(0x00400000)
-#define INTC_IPRL_INT21		(0x00200000)
-#define INTC_IPRL_INT20		(0x00100000)
-#define INTC_IPRL_INT19		(0x00080000)
-#define INTC_IPRL_INT18		(0x00040000)
-#define INTC_IPRL_INT17		(0x00020000)
-#define INTC_IPRL_INT16		(0x00010000)
-#define INTC_IPRL_INT15		(0x00008000)
-#define INTC_IPRL_INT14		(0x00004000)
-#define INTC_IPRL_INT13		(0x00002000)
-#define INTC_IPRL_INT12		(0x00001000)
-#define INTC_IPRL_INT11		(0x00000800)
-#define INTC_IPRL_INT10		(0x00000400)
-#define INTC_IPRL_INT9		(0x00000200)
-#define INTC_IPRL_INT8		(0x00000100)
-#define INTC_IPRL_INT7		(0x00000080)
-#define INTC_IPRL_INT6		(0x00000040)
-#define INTC_IPRL_INT5		(0x00000020)
-#define INTC_IPRL_INT4		(0x00000010)
-#define INTC_IPRL_INT3		(0x00000008)
-#define INTC_IPRL_INT2		(0x00000004)
-#define INTC_IPRL_INT1		(0x00000002)
-#define INTC_IPRL_INT0		(0x00000001)
-
 /* Bit definitions and macros for RCR */
 #define RCM_RCR_FRCRSTOUT	(0x40)
 #define RCM_RCR_SOFTRST		(0x80)
diff --git a/include/asm-m68k/m5282.h b/include/asm-m68k/m5282.h
index f6a6b0408..d59a8b2c3 100644
--- a/include/asm-m68k/m5282.h
+++ b/include/asm-m68k/m5282.h
@@ -125,112 +125,112 @@
 
 /* General Purpose I/O Module GPIO */
 
-#define MCFGPIO_PORTA		(*(vu_char *) (CFG_MBAR+0x100000))
-#define MCFGPIO_PORTB		(*(vu_char *) (CFG_MBAR+0x100001))
-#define MCFGPIO_PORTC		(*(vu_char *) (CFG_MBAR+0x100002))
-#define MCFGPIO_PORTD		(*(vu_char *) (CFG_MBAR+0x100003))
-#define MCFGPIO_PORTE		(*(vu_char *) (CFG_MBAR+0x100004))
-#define MCFGPIO_PORTF		(*(vu_char *) (CFG_MBAR+0x100005))
-#define MCFGPIO_PORTG		(*(vu_char *) (CFG_MBAR+0x100006))
-#define MCFGPIO_PORTH		(*(vu_char *) (CFG_MBAR+0x100007))
-#define MCFGPIO_PORTJ		(*(vu_char *) (CFG_MBAR+0x100008))
-#define MCFGPIO_PORTDD		(*(vu_char *) (CFG_MBAR+0x100009))
-#define MCFGPIO_PORTEH		(*(vu_char *) (CFG_MBAR+0x10000A))
-#define MCFGPIO_PORTEL		(*(vu_char *) (CFG_MBAR+0x10000B))
-#define MCFGPIO_PORTAS		(*(vu_char *) (CFG_MBAR+0x10000C))
-#define MCFGPIO_PORTQS		(*(vu_char *) (CFG_MBAR+0x10000D))
-#define MCFGPIO_PORTSD		(*(vu_char *) (CFG_MBAR+0x10000E))
-#define MCFGPIO_PORTTC		(*(vu_char *) (CFG_MBAR+0x10000F))
-#define MCFGPIO_PORTTD		(*(vu_char *) (CFG_MBAR+0x100010))
-#define MCFGPIO_PORTUA		(*(vu_char *) (CFG_MBAR+0x100011))
-
-#define MCFGPIO_DDRA		(*(vu_char *) (CFG_MBAR+0x100014))
-#define MCFGPIO_DDRB		(*(vu_char *) (CFG_MBAR+0x100015))
-#define MCFGPIO_DDRC		(*(vu_char *) (CFG_MBAR+0x100016))
-#define MCFGPIO_DDRD		(*(vu_char *) (CFG_MBAR+0x100017))
-#define MCFGPIO_DDRE		(*(vu_char *) (CFG_MBAR+0x100018))
-#define MCFGPIO_DDRF		(*(vu_char *) (CFG_MBAR+0x100019))
-#define MCFGPIO_DDRG		(*(vu_char *) (CFG_MBAR+0x10001A))
-#define MCFGPIO_DDRH		(*(vu_char *) (CFG_MBAR+0x10001B))
-#define MCFGPIO_DDRJ		(*(vu_char *) (CFG_MBAR+0x10001C))
-#define MCFGPIO_DDRDD		(*(vu_char *) (CFG_MBAR+0x10001D))
-#define MCFGPIO_DDREH		(*(vu_char *) (CFG_MBAR+0x10001E))
-#define MCFGPIO_DDREL		(*(vu_char *) (CFG_MBAR+0x10001F))
-#define MCFGPIO_DDRAS		(*(vu_char *) (CFG_MBAR+0x100020))
-#define MCFGPIO_DDRQS		(*(vu_char *) (CFG_MBAR+0x100021))
-#define MCFGPIO_DDRSD		(*(vu_char *) (CFG_MBAR+0x100022))
-#define MCFGPIO_DDRTC		(*(vu_char *) (CFG_MBAR+0x100023))
-#define MCFGPIO_DDRTD		(*(vu_char *) (CFG_MBAR+0x100024))
-#define MCFGPIO_DDRUA		(*(vu_char *) (CFG_MBAR+0x100025))
-
-#define MCFGPIO_PORTAP		(*(vu_char *) (CFG_MBAR+0x100028))
-#define MCFGPIO_PORTBP		(*(vu_char *) (CFG_MBAR+0x100029))
-#define MCFGPIO_PORTCP		(*(vu_char *) (CFG_MBAR+0x10002A))
-#define MCFGPIO_PORTDP		(*(vu_char *) (CFG_MBAR+0x10002B))
-#define MCFGPIO_PORTEP		(*(vu_char *) (CFG_MBAR+0x10002C))
-#define MCFGPIO_PORTFP		(*(vu_char *) (CFG_MBAR+0x10002D))
-#define MCFGPIO_PORTGP		(*(vu_char *) (CFG_MBAR+0x10002E))
-#define MCFGPIO_PORTHP		(*(vu_char *) (CFG_MBAR+0x10002F))
-#define MCFGPIO_PORTJP		(*(vu_char *) (CFG_MBAR+0x100030))
-#define MCFGPIO_PORTDDP		(*(vu_char *) (CFG_MBAR+0x100031))
-#define MCFGPIO_PORTEHP		(*(vu_char *) (CFG_MBAR+0x100032))
-#define MCFGPIO_PORTELP		(*(vu_char *) (CFG_MBAR+0x100033))
-#define MCFGPIO_PORTASP		(*(vu_char *) (CFG_MBAR+0x100034))
-#define MCFGPIO_PORTQSP		(*(vu_char *) (CFG_MBAR+0x100035))
-#define MCFGPIO_PORTSDP		(*(vu_char *) (CFG_MBAR+0x100036))
-#define MCFGPIO_PORTTCP		(*(vu_char *) (CFG_MBAR+0x100037))
-#define MCFGPIO_PORTTDP		(*(vu_char *) (CFG_MBAR+0x100038))
-#define MCFGPIO_PORTUAP		(*(vu_char *) (CFG_MBAR+0x100039))
-
-#define MCFGPIO_SETA		(*(vu_char *) (CFG_MBAR+0x100028))
-#define MCFGPIO_SETB		(*(vu_char *) (CFG_MBAR+0x100029))
-#define MCFGPIO_SETC		(*(vu_char *) (CFG_MBAR+0x10002A))
-#define MCFGPIO_SETD		(*(vu_char *) (CFG_MBAR+0x10002B))
-#define MCFGPIO_SETE		(*(vu_char *) (CFG_MBAR+0x10002C))
-#define MCFGPIO_SETF		(*(vu_char *) (CFG_MBAR+0x10002D))
-#define MCFGPIO_SETG		(*(vu_char *) (CFG_MBAR+0x10002E))
-#define MCFGPIO_SETH		(*(vu_char *) (CFG_MBAR+0x10002F))
-#define MCFGPIO_SETJ		(*(vu_char *) (CFG_MBAR+0x100030))
-#define MCFGPIO_SETDD		(*(vu_char *) (CFG_MBAR+0x100031))
-#define MCFGPIO_SETEH		(*(vu_char *) (CFG_MBAR+0x100032))
-#define MCFGPIO_SETEL		(*(vu_char *) (CFG_MBAR+0x100033))
-#define MCFGPIO_SETAS		(*(vu_char *) (CFG_MBAR+0x100034))
-#define MCFGPIO_SETQS		(*(vu_char *) (CFG_MBAR+0x100035))
-#define MCFGPIO_SETSD		(*(vu_char *) (CFG_MBAR+0x100036))
-#define MCFGPIO_SETTC		(*(vu_char *) (CFG_MBAR+0x100037))
-#define MCFGPIO_SETTD		(*(vu_char *) (CFG_MBAR+0x100038))
-#define MCFGPIO_SETUA		(*(vu_char *) (CFG_MBAR+0x100039))
-
-#define MCFGPIO_CLRA		(*(vu_char *) (CFG_MBAR+0x10003C))
-#define MCFGPIO_CLRB		(*(vu_char *) (CFG_MBAR+0x10003D))
-#define MCFGPIO_CLRC		(*(vu_char *) (CFG_MBAR+0x10003E))
-#define MCFGPIO_CLRD		(*(vu_char *) (CFG_MBAR+0x10003F))
-#define MCFGPIO_CLRE		(*(vu_char *) (CFG_MBAR+0x100040))
-#define MCFGPIO_CLRF		(*(vu_char *) (CFG_MBAR+0x100041))
-#define MCFGPIO_CLRG		(*(vu_char *) (CFG_MBAR+0x100042))
-#define MCFGPIO_CLRH		(*(vu_char *) (CFG_MBAR+0x100043))
-#define MCFGPIO_CLRJ		(*(vu_char *) (CFG_MBAR+0x100044))
-#define MCFGPIO_CLRDD		(*(vu_char *) (CFG_MBAR+0x100045))
-#define MCFGPIO_CLREH		(*(vu_char *) (CFG_MBAR+0x100046))
-#define MCFGPIO_CLREL		(*(vu_char *) (CFG_MBAR+0x100047))
-#define MCFGPIO_CLRAS		(*(vu_char *) (CFG_MBAR+0x100048))
-#define MCFGPIO_CLRQS		(*(vu_char *) (CFG_MBAR+0x100049))
-#define MCFGPIO_CLRSD		(*(vu_char *) (CFG_MBAR+0x10004A))
-#define MCFGPIO_CLRTC		(*(vu_char *) (CFG_MBAR+0x10004B))
-#define MCFGPIO_CLRTD		(*(vu_char *) (CFG_MBAR+0x10004C))
-#define MCFGPIO_CLRUA		(*(vu_char *) (CFG_MBAR+0x10004D))
-
-#define MCFGPIO_PBCDPAR	(*(vu_char *) (CFG_MBAR+0x100050))
-#define MCFGPIO_PFPAR		(*(vu_char *) (CFG_MBAR+0x100051))
-#define MCFGPIO_PEPAR		(*(vu_short *)(CFG_MBAR+0x100052))
-#define MCFGPIO_PJPAR		(*(vu_char *) (CFG_MBAR+0x100054))
-#define MCFGPIO_PSDPAR		(*(vu_char *) (CFG_MBAR+0x100055))
-#define MCFGPIO_PASPAR		(*(vu_short *)(CFG_MBAR+0x100056))
-#define MCFGPIO_PEHLPAR		(*(vu_char *) (CFG_MBAR+0x100058))
-#define MCFGPIO_PQSPAR		(*(vu_char *) (CFG_MBAR+0x100059))
-#define MCFGPIO_PTCPAR		(*(vu_char *) (CFG_MBAR+0x10005A))
-#define MCFGPIO_PTDPAR		(*(vu_char *) (CFG_MBAR+0x10005B))
-#define MCFGPIO_PUAPAR		(*(vu_char *) (CFG_MBAR+0x10005C))
+#define MCFGPIO_PORTA		(*(vu_char *) (CONFIG_SYS_MBAR+0x100000))
+#define MCFGPIO_PORTB		(*(vu_char *) (CONFIG_SYS_MBAR+0x100001))
+#define MCFGPIO_PORTC		(*(vu_char *) (CONFIG_SYS_MBAR+0x100002))
+#define MCFGPIO_PORTD		(*(vu_char *) (CONFIG_SYS_MBAR+0x100003))
+#define MCFGPIO_PORTE		(*(vu_char *) (CONFIG_SYS_MBAR+0x100004))
+#define MCFGPIO_PORTF		(*(vu_char *) (CONFIG_SYS_MBAR+0x100005))
+#define MCFGPIO_PORTG		(*(vu_char *) (CONFIG_SYS_MBAR+0x100006))
+#define MCFGPIO_PORTH		(*(vu_char *) (CONFIG_SYS_MBAR+0x100007))
+#define MCFGPIO_PORTJ		(*(vu_char *) (CONFIG_SYS_MBAR+0x100008))
+#define MCFGPIO_PORTDD		(*(vu_char *) (CONFIG_SYS_MBAR+0x100009))
+#define MCFGPIO_PORTEH		(*(vu_char *) (CONFIG_SYS_MBAR+0x10000A))
+#define MCFGPIO_PORTEL		(*(vu_char *) (CONFIG_SYS_MBAR+0x10000B))
+#define MCFGPIO_PORTAS		(*(vu_char *) (CONFIG_SYS_MBAR+0x10000C))
+#define MCFGPIO_PORTQS		(*(vu_char *) (CONFIG_SYS_MBAR+0x10000D))
+#define MCFGPIO_PORTSD		(*(vu_char *) (CONFIG_SYS_MBAR+0x10000E))
+#define MCFGPIO_PORTTC		(*(vu_char *) (CONFIG_SYS_MBAR+0x10000F))
+#define MCFGPIO_PORTTD		(*(vu_char *) (CONFIG_SYS_MBAR+0x100010))
+#define MCFGPIO_PORTUA		(*(vu_char *) (CONFIG_SYS_MBAR+0x100011))
+
+#define MCFGPIO_DDRA		(*(vu_char *) (CONFIG_SYS_MBAR+0x100014))
+#define MCFGPIO_DDRB		(*(vu_char *) (CONFIG_SYS_MBAR+0x100015))
+#define MCFGPIO_DDRC		(*(vu_char *) (CONFIG_SYS_MBAR+0x100016))
+#define MCFGPIO_DDRD		(*(vu_char *) (CONFIG_SYS_MBAR+0x100017))
+#define MCFGPIO_DDRE		(*(vu_char *) (CONFIG_SYS_MBAR+0x100018))
+#define MCFGPIO_DDRF		(*(vu_char *) (CONFIG_SYS_MBAR+0x100019))
+#define MCFGPIO_DDRG		(*(vu_char *) (CONFIG_SYS_MBAR+0x10001A))
+#define MCFGPIO_DDRH		(*(vu_char *) (CONFIG_SYS_MBAR+0x10001B))
+#define MCFGPIO_DDRJ		(*(vu_char *) (CONFIG_SYS_MBAR+0x10001C))
+#define MCFGPIO_DDRDD		(*(vu_char *) (CONFIG_SYS_MBAR+0x10001D))
+#define MCFGPIO_DDREH		(*(vu_char *) (CONFIG_SYS_MBAR+0x10001E))
+#define MCFGPIO_DDREL		(*(vu_char *) (CONFIG_SYS_MBAR+0x10001F))
+#define MCFGPIO_DDRAS		(*(vu_char *) (CONFIG_SYS_MBAR+0x100020))
+#define MCFGPIO_DDRQS		(*(vu_char *) (CONFIG_SYS_MBAR+0x100021))
+#define MCFGPIO_DDRSD		(*(vu_char *) (CONFIG_SYS_MBAR+0x100022))
+#define MCFGPIO_DDRTC		(*(vu_char *) (CONFIG_SYS_MBAR+0x100023))
+#define MCFGPIO_DDRTD		(*(vu_char *) (CONFIG_SYS_MBAR+0x100024))
+#define MCFGPIO_DDRUA		(*(vu_char *) (CONFIG_SYS_MBAR+0x100025))
+
+#define MCFGPIO_PORTAP		(*(vu_char *) (CONFIG_SYS_MBAR+0x100028))
+#define MCFGPIO_PORTBP		(*(vu_char *) (CONFIG_SYS_MBAR+0x100029))
+#define MCFGPIO_PORTCP		(*(vu_char *) (CONFIG_SYS_MBAR+0x10002A))
+#define MCFGPIO_PORTDP		(*(vu_char *) (CONFIG_SYS_MBAR+0x10002B))
+#define MCFGPIO_PORTEP		(*(vu_char *) (CONFIG_SYS_MBAR+0x10002C))
+#define MCFGPIO_PORTFP		(*(vu_char *) (CONFIG_SYS_MBAR+0x10002D))
+#define MCFGPIO_PORTGP		(*(vu_char *) (CONFIG_SYS_MBAR+0x10002E))
+#define MCFGPIO_PORTHP		(*(vu_char *) (CONFIG_SYS_MBAR+0x10002F))
+#define MCFGPIO_PORTJP		(*(vu_char *) (CONFIG_SYS_MBAR+0x100030))
+#define MCFGPIO_PORTDDP		(*(vu_char *) (CONFIG_SYS_MBAR+0x100031))
+#define MCFGPIO_PORTEHP		(*(vu_char *) (CONFIG_SYS_MBAR+0x100032))
+#define MCFGPIO_PORTELP		(*(vu_char *) (CONFIG_SYS_MBAR+0x100033))
+#define MCFGPIO_PORTASP		(*(vu_char *) (CONFIG_SYS_MBAR+0x100034))
+#define MCFGPIO_PORTQSP		(*(vu_char *) (CONFIG_SYS_MBAR+0x100035))
+#define MCFGPIO_PORTSDP		(*(vu_char *) (CONFIG_SYS_MBAR+0x100036))
+#define MCFGPIO_PORTTCP		(*(vu_char *) (CONFIG_SYS_MBAR+0x100037))
+#define MCFGPIO_PORTTDP		(*(vu_char *) (CONFIG_SYS_MBAR+0x100038))
+#define MCFGPIO_PORTUAP		(*(vu_char *) (CONFIG_SYS_MBAR+0x100039))
+
+#define MCFGPIO_SETA		(*(vu_char *) (CONFIG_SYS_MBAR+0x100028))
+#define MCFGPIO_SETB		(*(vu_char *) (CONFIG_SYS_MBAR+0x100029))
+#define MCFGPIO_SETC		(*(vu_char *) (CONFIG_SYS_MBAR+0x10002A))
+#define MCFGPIO_SETD		(*(vu_char *) (CONFIG_SYS_MBAR+0x10002B))
+#define MCFGPIO_SETE		(*(vu_char *) (CONFIG_SYS_MBAR+0x10002C))
+#define MCFGPIO_SETF		(*(vu_char *) (CONFIG_SYS_MBAR+0x10002D))
+#define MCFGPIO_SETG		(*(vu_char *) (CONFIG_SYS_MBAR+0x10002E))
+#define MCFGPIO_SETH		(*(vu_char *) (CONFIG_SYS_MBAR+0x10002F))
+#define MCFGPIO_SETJ		(*(vu_char *) (CONFIG_SYS_MBAR+0x100030))
+#define MCFGPIO_SETDD		(*(vu_char *) (CONFIG_SYS_MBAR+0x100031))
+#define MCFGPIO_SETEH		(*(vu_char *) (CONFIG_SYS_MBAR+0x100032))
+#define MCFGPIO_SETEL		(*(vu_char *) (CONFIG_SYS_MBAR+0x100033))
+#define MCFGPIO_SETAS		(*(vu_char *) (CONFIG_SYS_MBAR+0x100034))
+#define MCFGPIO_SETQS		(*(vu_char *) (CONFIG_SYS_MBAR+0x100035))
+#define MCFGPIO_SETSD		(*(vu_char *) (CONFIG_SYS_MBAR+0x100036))
+#define MCFGPIO_SETTC		(*(vu_char *) (CONFIG_SYS_MBAR+0x100037))
+#define MCFGPIO_SETTD		(*(vu_char *) (CONFIG_SYS_MBAR+0x100038))
+#define MCFGPIO_SETUA		(*(vu_char *) (CONFIG_SYS_MBAR+0x100039))
+
+#define MCFGPIO_CLRA		(*(vu_char *) (CONFIG_SYS_MBAR+0x10003C))
+#define MCFGPIO_CLRB		(*(vu_char *) (CONFIG_SYS_MBAR+0x10003D))
+#define MCFGPIO_CLRC		(*(vu_char *) (CONFIG_SYS_MBAR+0x10003E))
+#define MCFGPIO_CLRD		(*(vu_char *) (CONFIG_SYS_MBAR+0x10003F))
+#define MCFGPIO_CLRE		(*(vu_char *) (CONFIG_SYS_MBAR+0x100040))
+#define MCFGPIO_CLRF		(*(vu_char *) (CONFIG_SYS_MBAR+0x100041))
+#define MCFGPIO_CLRG		(*(vu_char *) (CONFIG_SYS_MBAR+0x100042))
+#define MCFGPIO_CLRH		(*(vu_char *) (CONFIG_SYS_MBAR+0x100043))
+#define MCFGPIO_CLRJ		(*(vu_char *) (CONFIG_SYS_MBAR+0x100044))
+#define MCFGPIO_CLRDD		(*(vu_char *) (CONFIG_SYS_MBAR+0x100045))
+#define MCFGPIO_CLREH		(*(vu_char *) (CONFIG_SYS_MBAR+0x100046))
+#define MCFGPIO_CLREL		(*(vu_char *) (CONFIG_SYS_MBAR+0x100047))
+#define MCFGPIO_CLRAS		(*(vu_char *) (CONFIG_SYS_MBAR+0x100048))
+#define MCFGPIO_CLRQS		(*(vu_char *) (CONFIG_SYS_MBAR+0x100049))
+#define MCFGPIO_CLRSD		(*(vu_char *) (CONFIG_SYS_MBAR+0x10004A))
+#define MCFGPIO_CLRTC		(*(vu_char *) (CONFIG_SYS_MBAR+0x10004B))
+#define MCFGPIO_CLRTD		(*(vu_char *) (CONFIG_SYS_MBAR+0x10004C))
+#define MCFGPIO_CLRUA		(*(vu_char *) (CONFIG_SYS_MBAR+0x10004D))
+
+#define MCFGPIO_PBCDPAR	(*(vu_char *) (CONFIG_SYS_MBAR+0x100050))
+#define MCFGPIO_PFPAR		(*(vu_char *) (CONFIG_SYS_MBAR+0x100051))
+#define MCFGPIO_PEPAR		(*(vu_short *)(CONFIG_SYS_MBAR+0x100052))
+#define MCFGPIO_PJPAR		(*(vu_char *) (CONFIG_SYS_MBAR+0x100054))
+#define MCFGPIO_PSDPAR		(*(vu_char *) (CONFIG_SYS_MBAR+0x100055))
+#define MCFGPIO_PASPAR		(*(vu_short *)(CONFIG_SYS_MBAR+0x100056))
+#define MCFGPIO_PEHLPAR		(*(vu_char *) (CONFIG_SYS_MBAR+0x100058))
+#define MCFGPIO_PQSPAR		(*(vu_char *) (CONFIG_SYS_MBAR+0x100059))
+#define MCFGPIO_PTCPAR		(*(vu_char *) (CONFIG_SYS_MBAR+0x10005A))
+#define MCFGPIO_PTDPAR		(*(vu_char *) (CONFIG_SYS_MBAR+0x10005B))
+#define MCFGPIO_PUAPAR		(*(vu_char *) (CONFIG_SYS_MBAR+0x10005C))
 
 /* Bit level definitions and macros */
 #define MCFGPIO_PORT7			(0x80)
@@ -327,25 +327,25 @@
 
 /* System Conrol Module SCM */
 
-#define MCFSCM_RAMBAR		(*(vu_long *) (CFG_MBAR+0x00000008))
-#define MCFSCM_CRSR		(*(vu_char *) (CFG_MBAR+0x00000010))
-#define MCFSCM_CWCR		(*(vu_char *) (CFG_MBAR+0x00000011))
-#define MCFSCM_LPICR		(*(vu_char *) (CFG_MBAR+0x00000012))
-#define MCFSCM_CWSR		(*(vu_char *) (CFG_MBAR+0x00000013))
-
-#define MCFSCM_MPARK		(*(vu_long *) (CFG_MBAR+0x0000001C))
-#define MCFSCM_MPR		(*(vu_char *) (CFG_MBAR+0x00000020))
-#define MCFSCM_PACR0		(*(vu_char *) (CFG_MBAR+0x00000024))
-#define MCFSCM_PACR1		(*(vu_char *) (CFG_MBAR+0x00000025))
-#define MCFSCM_PACR2		(*(vu_char *) (CFG_MBAR+0x00000026))
-#define MCFSCM_PACR3		(*(vu_char *) (CFG_MBAR+0x00000027))
-#define MCFSCM_PACR4		(*(vu_char *) (CFG_MBAR+0x00000028))
-#define MCFSCM_PACR5		(*(vu_char *) (CFG_MBAR+0x0000002A))
-#define MCFSCM_PACR6		(*(vu_char *) (CFG_MBAR+0x0000002B))
-#define MCFSCM_PACR7		(*(vu_char *) (CFG_MBAR+0x0000002C))
-#define MCFSCM_PACR8		(*(vu_char *) (CFG_MBAR+0x0000002E))
-#define MCFSCM_GPACR0		(*(vu_char *) (CFG_MBAR+0x00000030))
-#define MCFSCM_GPACR1		(*(vu_char *) (CFG_MBAR+0x00000031))
+#define MCFSCM_RAMBAR		(*(vu_long *) (CONFIG_SYS_MBAR+0x00000008))
+#define MCFSCM_CRSR		(*(vu_char *) (CONFIG_SYS_MBAR+0x00000010))
+#define MCFSCM_CWCR		(*(vu_char *) (CONFIG_SYS_MBAR+0x00000011))
+#define MCFSCM_LPICR		(*(vu_char *) (CONFIG_SYS_MBAR+0x00000012))
+#define MCFSCM_CWSR		(*(vu_char *) (CONFIG_SYS_MBAR+0x00000013))
+
+#define MCFSCM_MPARK		(*(vu_long *) (CONFIG_SYS_MBAR+0x0000001C))
+#define MCFSCM_MPR		(*(vu_char *) (CONFIG_SYS_MBAR+0x00000020))
+#define MCFSCM_PACR0		(*(vu_char *) (CONFIG_SYS_MBAR+0x00000024))
+#define MCFSCM_PACR1		(*(vu_char *) (CONFIG_SYS_MBAR+0x00000025))
+#define MCFSCM_PACR2		(*(vu_char *) (CONFIG_SYS_MBAR+0x00000026))
+#define MCFSCM_PACR3		(*(vu_char *) (CONFIG_SYS_MBAR+0x00000027))
+#define MCFSCM_PACR4		(*(vu_char *) (CONFIG_SYS_MBAR+0x00000028))
+#define MCFSCM_PACR5		(*(vu_char *) (CONFIG_SYS_MBAR+0x0000002A))
+#define MCFSCM_PACR6		(*(vu_char *) (CONFIG_SYS_MBAR+0x0000002B))
+#define MCFSCM_PACR7		(*(vu_char *) (CONFIG_SYS_MBAR+0x0000002C))
+#define MCFSCM_PACR8		(*(vu_char *) (CONFIG_SYS_MBAR+0x0000002E))
+#define MCFSCM_GPACR0		(*(vu_char *) (CONFIG_SYS_MBAR+0x00000030))
+#define MCFSCM_GPACR1		(*(vu_char *) (CONFIG_SYS_MBAR+0x00000031))
 
 #define MCFSCM_CRSR_EXT		(0x80)
 #define MCFSCM_CRSR_CWDR	(0x20)
@@ -354,8 +354,8 @@
 
 /* Reset Controller Module RCM */
 
-#define MCFRESET_RCR		(*(vu_char *) (CFG_MBAR+0x00110000))
-#define MCFRESET_RSR		(*(vu_char *) (CFG_MBAR+0x00110001))
+#define MCFRESET_RCR		(*(vu_char *) (CONFIG_SYS_MBAR+0x00110000))
+#define MCFRESET_RSR		(*(vu_char *) (CONFIG_SYS_MBAR+0x00110001))
 
 #define MCFRESET_RCR_SOFTRST	(0x80)
 #define MCFRESET_RCR_FRCRSTOUT	(0x40)
@@ -377,9 +377,9 @@
 
 /* Chip Configuration Module CCM */
 
-#define MCFCCM_CCR		(*(vu_short *)(CFG_MBAR+0x00110004))
-#define MCFCCM_RCON		(*(vu_short *)(CFG_MBAR+0x00110008))
-#define MCFCCM_CIR		(*(vu_short *)(CFG_MBAR+0x0011000A))
+#define MCFCCM_CCR		(*(vu_short *)(CONFIG_SYS_MBAR+0x00110004))
+#define MCFCCM_RCON		(*(vu_short *)(CONFIG_SYS_MBAR+0x00110008))
+#define MCFCCM_CIR		(*(vu_short *)(CONFIG_SYS_MBAR+0x0011000A))
 
 /* Bit level definitions and macros */
 #define MCFCCM_CCR_LOAD		(0x8000)
@@ -394,18 +394,18 @@
 
 /* Clock Module */
 
-#define MCFCLOCK_SYNCR		(*(vu_short *)(CFG_MBAR+0x120000))
-#define MCFCLOCK_SYNSR		(*(vu_char *) (CFG_MBAR+0x120002))
+#define MCFCLOCK_SYNCR		(*(vu_short *)(CONFIG_SYS_MBAR+0x120000))
+#define MCFCLOCK_SYNSR		(*(vu_char *) (CONFIG_SYS_MBAR+0x120002))
 
 #define MCFCLOCK_SYNCR_MFD(x)	(((x)&0x0007)<<12)
 #define MCFCLOCK_SYNCR_RFD(x)	(((x)&0x0007)<<8)
 #define MCFCLOCK_SYNSR_LOCK	0x08
 
-#define MCFSDRAMC_DCR		(*(vu_short *)(CFG_MBAR+0x00000040))
-#define MCFSDRAMC_DACR0		(*(vu_long *) (CFG_MBAR+0x00000048))
-#define MCFSDRAMC_DMR0		(*(vu_long *) (CFG_MBAR+0x0000004c))
-#define MCFSDRAMC_DACR1		(*(vu_long *) (CFG_MBAR+0x00000050))
-#define MCFSDRAMC_DMR1		(*(vu_long *) (CFG_MBAR+0x00000054))
+#define MCFSDRAMC_DCR		(*(vu_short *)(CONFIG_SYS_MBAR+0x00000040))
+#define MCFSDRAMC_DACR0		(*(vu_long *) (CONFIG_SYS_MBAR+0x00000048))
+#define MCFSDRAMC_DMR0		(*(vu_long *) (CONFIG_SYS_MBAR+0x0000004c))
+#define MCFSDRAMC_DACR1		(*(vu_long *) (CONFIG_SYS_MBAR+0x00000050))
+#define MCFSDRAMC_DMR1		(*(vu_long *) (CONFIG_SYS_MBAR+0x00000054))
 
 #define MCFSDRAMC_DCR_NAM	(0x2000)
 #define MCFSDRAMC_DCR_COC	(0x1000)
@@ -435,83 +435,60 @@
 #define MCFSDRAMC_DMR_UD	(0x00000002)
 #define MCFSDRAMC_DMR_V		(0x00000001)
 
-#define MCFWTM_WCR		(*(vu_short *)(CFG_MBAR+0x00140000))
-#define MCFWTM_WMR		(*(vu_short *)(CFG_MBAR+0x00140002))
-#define MCFWTM_WCNTR		(*(vu_short *)(CFG_MBAR+0x00140004))
-#define MCFWTM_WSR		(*(vu_short *)(CFG_MBAR+0x00140006))
-
-/*  Chip SELECT Module CSM */
-#define MCFCSM_CSAR0		(*(vu_short *)(CFG_MBAR+0x00000080))
-#define MCFCSM_CSMR0		(*(vu_long *) (CFG_MBAR+0x00000084))
-#define MCFCSM_CSCR0		(*(vu_short *)(CFG_MBAR+0x0000008a))
-#define MCFCSM_CSAR1		(*(vu_short *)(CFG_MBAR+0x0000008C))
-#define MCFCSM_CSMR1		(*(vu_long *) (CFG_MBAR+0x00000090))
-#define MCFCSM_CSCR1		(*(vu_short *)(CFG_MBAR+0x00000096))
-#define MCFCSM_CSAR2		(*(vu_short *)(CFG_MBAR+0x00000098))
-#define MCFCSM_CSMR2		(*(vu_long *) (CFG_MBAR+0x0000009C))
-#define MCFCSM_CSCR2		(*(vu_short *)(CFG_MBAR+0x000000A2))
-#define MCFCSM_CSAR3		(*(vu_short *)(CFG_MBAR+0x000000A4))
-#define MCFCSM_CSMR3		(*(vu_long *) (CFG_MBAR+0x000000A8))
-#define MCFCSM_CSCR3		(*(vu_short *)(CFG_MBAR+0x000000AE))
-
-#define MCFCSM_CSMR_BAM(x)	((x) & 0xFFFF0000)
-#define MCFCSM_CSMR_WP		(1<<8)
-#define MCFCSM_CSMR_V		(0x01)
-#define MCFCSM_CSCR_WS(x)	((x & 0x0F)<<10)
-#define MCFCSM_CSCR_AA		(0x0100)
-#define MCFCSM_CSCR_PS_32	(0x0000)
-#define MCFCSM_CSCR_PS_8	(0x0040)
-#define MCFCSM_CSCR_PS_16	(0x0080)
+#define MCFWTM_WCR		(*(vu_short *)(CONFIG_SYS_MBAR+0x00140000))
+#define MCFWTM_WMR		(*(vu_short *)(CONFIG_SYS_MBAR+0x00140002))
+#define MCFWTM_WCNTR		(*(vu_short *)(CONFIG_SYS_MBAR+0x00140004))
+#define MCFWTM_WSR		(*(vu_short *)(CONFIG_SYS_MBAR+0x00140006))
 
 /*********************************************************************
 * General Purpose Timer (GPT) Module
 *********************************************************************/
 
-#define MCFGPTA_GPTIOS		(*(vu_char *)(CFG_MBAR+0x1A0000))
-#define MCFGPTA_GPTCFORC	(*(vu_char *)(CFG_MBAR+0x1A0001))
-#define MCFGPTA_GPTOC3M		(*(vu_char *)(CFG_MBAR+0x1A0002))
-#define MCFGPTA_GPTOC3D		(*(vu_char *)(CFG_MBAR+0x1A0003))
-#define MCFGPTA_GPTCNT		(*(vu_short *)(CFG_MBAR+0x1A0004))
-#define MCFGPTA_GPTSCR1		(*(vu_char *)(CFG_MBAR+0x1A0006))
-#define MCFGPTA_GPTTOV		(*(vu_char *)(CFG_MBAR+0x1A0008))
-#define MCFGPTA_GPTCTL1		(*(vu_char *)(CFG_MBAR+0x1A0009))
-#define MCFGPTA_GPTCTL2		(*(vu_char *)(CFG_MBAR+0x1A000B))
-#define MCFGPTA_GPTIE		(*(vu_char *)(CFG_MBAR+0x1A000C))
-#define MCFGPTA_GPTSCR2		(*(vu_char *)(CFG_MBAR+0x1A000D))
-#define MCFGPTA_GPTFLG1		(*(vu_char *)(CFG_MBAR+0x1A000E))
-#define MCFGPTA_GPTFLG2		(*(vu_char *)(CFG_MBAR+0x1A000F))
-#define MCFGPTA_GPTC0		(*(vu_short *)(CFG_MBAR+0x1A0010))
-#define MCFGPTA_GPTC1		(*(vu_short *)(CFG_MBAR+0x1A0012))
-#define MCFGPTA_GPTC2		(*(vu_short *)(CFG_MBAR+0x1A0014))
-#define MCFGPTA_GPTC3		(*(vu_short *)(CFG_MBAR+0x1A0016))
-#define MCFGPTA_GPTPACTL	(*(vu_char *)(CFG_MBAR+0x1A0018))
-#define MCFGPTA_GPTPAFLG	(*(vu_char *)(CFG_MBAR+0x1A0019))
-#define MCFGPTA_GPTPACNT	(*(vu_short *)(CFG_MBAR+0x1A001A))
-#define MCFGPTA_GPTPORT		(*(vu_char *)(CFG_MBAR+0x1A001D))
-#define MCFGPTA_GPTDDR		(*(vu_char *)(CFG_MBAR+0x1A001E))
-
-#define MCFGPTB_GPTIOS		(*(vu_char *)(CFG_MBAR+0x1B0000))
-#define MCFGPTB_GPTCFORC	(*(vu_char *)(CFG_MBAR+0x1B0001))
-#define MCFGPTB_GPTOC3M		(*(vu_char *)(CFG_MBAR+0x1B0002))
-#define MCFGPTB_GPTOC3D		(*(vu_char *)(CFG_MBAR+0x1B0003))
-#define MCFGPTB_GPTCNT		(*(vu_short *)(CFG_MBAR+0x1B0004))
-#define MCFGPTB_GPTSCR1		(*(vu_char *)(CFG_MBAR+0x1B0006))
-#define MCFGPTB_GPTTOV		(*(vu_char *)(CFG_MBAR+0x1B0008))
-#define MCFGPTB_GPTCTL1		(*(vu_char *)(CFG_MBAR+0x1B0009))
-#define MCFGPTB_GPTCTL2		(*(vu_char *)(CFG_MBAR+0x1B000B))
-#define MCFGPTB_GPTIE		(*(vu_char *)(CFG_MBAR+0x1B000C))
-#define MCFGPTB_GPTSCR2		(*(vu_char *)(CFG_MBAR+0x1B000D))
-#define MCFGPTB_GPTFLG1		(*(vu_char *)(CFG_MBAR+0x1B000E))
-#define MCFGPTB_GPTFLG2		(*(vu_char *)(CFG_MBAR+0x1B000F))
-#define MCFGPTB_GPTC0		(*(vu_short *)(CFG_MBAR+0x1B0010))
-#define MCFGPTB_GPTC1		(*(vu_short *)(CFG_MBAR+0x1B0012))
-#define MCFGPTB_GPTC2		(*(vu_short *)(CFG_MBAR+0x1B0014))
-#define MCFGPTB_GPTC3		(*(vu_short *)(CFG_MBAR+0x1B0016))
-#define MCFGPTB_GPTPACTL	(*(vu_char *)(CFG_MBAR+0x1B0018))
-#define MCFGPTB_GPTPAFLG	(*(vu_char *)(CFG_MBAR+0x1B0019))
-#define MCFGPTB_GPTPACNT	(*(vu_short *)(CFG_MBAR+0x1B001A))
-#define MCFGPTB_GPTPORT		(*(vu_char *)(CFG_MBAR+0x1B001D))
-#define MCFGPTB_GPTDDR		(*(vu_char *)(CFG_MBAR+0x1B001E))
+#define MCFGPTA_GPTIOS		(*(vu_char *)(CONFIG_SYS_MBAR+0x1A0000))
+#define MCFGPTA_GPTCFORC	(*(vu_char *)(CONFIG_SYS_MBAR+0x1A0001))
+#define MCFGPTA_GPTOC3M		(*(vu_char *)(CONFIG_SYS_MBAR+0x1A0002))
+#define MCFGPTA_GPTOC3D		(*(vu_char *)(CONFIG_SYS_MBAR+0x1A0003))
+#define MCFGPTA_GPTCNT		(*(vu_short *)(CONFIG_SYS_MBAR+0x1A0004))
+#define MCFGPTA_GPTSCR1		(*(vu_char *)(CONFIG_SYS_MBAR+0x1A0006))
+#define MCFGPTA_GPTTOV		(*(vu_char *)(CONFIG_SYS_MBAR+0x1A0008))
+#define MCFGPTA_GPTCTL1		(*(vu_char *)(CONFIG_SYS_MBAR+0x1A0009))
+#define MCFGPTA_GPTCTL2		(*(vu_char *)(CONFIG_SYS_MBAR+0x1A000B))
+#define MCFGPTA_GPTIE		(*(vu_char *)(CONFIG_SYS_MBAR+0x1A000C))
+#define MCFGPTA_GPTSCR2		(*(vu_char *)(CONFIG_SYS_MBAR+0x1A000D))
+#define MCFGPTA_GPTFLG1		(*(vu_char *)(CONFIG_SYS_MBAR+0x1A000E))
+#define MCFGPTA_GPTFLG2		(*(vu_char *)(CONFIG_SYS_MBAR+0x1A000F))
+#define MCFGPTA_GPTC0		(*(vu_short *)(CONFIG_SYS_MBAR+0x1A0010))
+#define MCFGPTA_GPTC1		(*(vu_short *)(CONFIG_SYS_MBAR+0x1A0012))
+#define MCFGPTA_GPTC2		(*(vu_short *)(CONFIG_SYS_MBAR+0x1A0014))
+#define MCFGPTA_GPTC3		(*(vu_short *)(CONFIG_SYS_MBAR+0x1A0016))
+#define MCFGPTA_GPTPACTL	(*(vu_char *)(CONFIG_SYS_MBAR+0x1A0018))
+#define MCFGPTA_GPTPAFLG	(*(vu_char *)(CONFIG_SYS_MBAR+0x1A0019))
+#define MCFGPTA_GPTPACNT	(*(vu_short *)(CONFIG_SYS_MBAR+0x1A001A))
+#define MCFGPTA_GPTPORT		(*(vu_char *)(CONFIG_SYS_MBAR+0x1A001D))
+#define MCFGPTA_GPTDDR		(*(vu_char *)(CONFIG_SYS_MBAR+0x1A001E))
+
+#define MCFGPTB_GPTIOS		(*(vu_char *)(CONFIG_SYS_MBAR+0x1B0000))
+#define MCFGPTB_GPTCFORC	(*(vu_char *)(CONFIG_SYS_MBAR+0x1B0001))
+#define MCFGPTB_GPTOC3M		(*(vu_char *)(CONFIG_SYS_MBAR+0x1B0002))
+#define MCFGPTB_GPTOC3D		(*(vu_char *)(CONFIG_SYS_MBAR+0x1B0003))
+#define MCFGPTB_GPTCNT		(*(vu_short *)(CONFIG_SYS_MBAR+0x1B0004))
+#define MCFGPTB_GPTSCR1		(*(vu_char *)(CONFIG_SYS_MBAR+0x1B0006))
+#define MCFGPTB_GPTTOV		(*(vu_char *)(CONFIG_SYS_MBAR+0x1B0008))
+#define MCFGPTB_GPTCTL1		(*(vu_char *)(CONFIG_SYS_MBAR+0x1B0009))
+#define MCFGPTB_GPTCTL2		(*(vu_char *)(CONFIG_SYS_MBAR+0x1B000B))
+#define MCFGPTB_GPTIE		(*(vu_char *)(CONFIG_SYS_MBAR+0x1B000C))
+#define MCFGPTB_GPTSCR2		(*(vu_char *)(CONFIG_SYS_MBAR+0x1B000D))
+#define MCFGPTB_GPTFLG1		(*(vu_char *)(CONFIG_SYS_MBAR+0x1B000E))
+#define MCFGPTB_GPTFLG2		(*(vu_char *)(CONFIG_SYS_MBAR+0x1B000F))
+#define MCFGPTB_GPTC0		(*(vu_short *)(CONFIG_SYS_MBAR+0x1B0010))
+#define MCFGPTB_GPTC1		(*(vu_short *)(CONFIG_SYS_MBAR+0x1B0012))
+#define MCFGPTB_GPTC2		(*(vu_short *)(CONFIG_SYS_MBAR+0x1B0014))
+#define MCFGPTB_GPTC3		(*(vu_short *)(CONFIG_SYS_MBAR+0x1B0016))
+#define MCFGPTB_GPTPACTL	(*(vu_char *)(CONFIG_SYS_MBAR+0x1B0018))
+#define MCFGPTB_GPTPAFLG	(*(vu_char *)(CONFIG_SYS_MBAR+0x1B0019))
+#define MCFGPTB_GPTPACNT	(*(vu_short *)(CONFIG_SYS_MBAR+0x1B001A))
+#define MCFGPTB_GPTPORT		(*(vu_char *)(CONFIG_SYS_MBAR+0x1B001D))
+#define MCFGPTB_GPTDDR		(*(vu_char *)(CONFIG_SYS_MBAR+0x1B001E))
 
 /* Bit level definitions and macros */
 #define MCFGPT_GPTIOS_IOS3		(0x08)
@@ -596,7 +573,7 @@
 
 /* Coldfire Flash Module CFM */
 
-#define MCFCFM_MCR			(*(vu_short *)(CFG_MBAR+0x1D0000))
+#define MCFCFM_MCR			(*(vu_short *)(CONFIG_SYS_MBAR+0x1D0000))
 #define MCFCFM_MCR_LOCK			(0x0400)
 #define MCFCFM_MCR_PVIE			(0x0200)
 #define MCFCFM_MCR_AEIE			(0x0100)
@@ -604,23 +581,23 @@
 #define MCFCFM_MCR_CCIE			(0x0040)
 #define MCFCFM_MCR_KEYACC		(0x0020)
 
-#define MCFCFM_CLKD			(*(vu_char *)(CFG_MBAR+0x1D0002))
+#define MCFCFM_CLKD			(*(vu_char *)(CONFIG_SYS_MBAR+0x1D0002))
 
-#define MCFCFM_SEC			(*(vu_long*) (CFG_MBAR+0x1D0008))
+#define MCFCFM_SEC			(*(vu_long*) (CONFIG_SYS_MBAR+0x1D0008))
 #define MCFCFM_SEC_KEYEN		(0x80000000)
 #define MCFCFM_SEC_SECSTAT		(0x40000000)
 
-#define MCFCFM_PROT			(*(vu_long*) (CFG_MBAR+0x1D0010))
-#define MCFCFM_SACC			(*(vu_long*) (CFG_MBAR+0x1D0014))
-#define MCFCFM_DACC			(*(vu_long*) (CFG_MBAR+0x1D0018))
-#define MCFCFM_USTAT			(*(vu_char*) (CFG_MBAR+0x1D0020))
+#define MCFCFM_PROT			(*(vu_long*) (CONFIG_SYS_MBAR+0x1D0010))
+#define MCFCFM_SACC			(*(vu_long*) (CONFIG_SYS_MBAR+0x1D0014))
+#define MCFCFM_DACC			(*(vu_long*) (CONFIG_SYS_MBAR+0x1D0018))
+#define MCFCFM_USTAT			(*(vu_char*) (CONFIG_SYS_MBAR+0x1D0020))
 #define MCFCFM_USTAT_CBEIF		0x80
 #define MCFCFM_USTAT_CCIF		0x40
 #define MCFCFM_USTAT_PVIOL		0x20
 #define MCFCFM_USTAT_ACCERR		0x10
 #define MCFCFM_USTAT_BLANK		0x04
 
-#define MCFCFM_CMD			(*(vu_char*) (CFG_MBAR+0x1D0024))
+#define MCFCFM_CMD			(*(vu_char*) (CONFIG_SYS_MBAR+0x1D0024))
 #define MCFCFM_CMD_ERSVER		0x05
 #define MCFCFM_CMD_PGERSVER		0x06
 #define MCFCFM_CMD_PGM			0x20
diff --git a/include/asm-m68k/m5301x.h b/include/asm-m68k/m5301x.h
new file mode 100644
index 000000000..52bbb87e2
--- /dev/null
+++ b/include/asm-m68k/m5301x.h
@@ -0,0 +1,604 @@
+/*
+ * m5301x.h -- Definitions for Freescale Coldfire 5301x
+ *
+ * Copyright (C) 2004-2008 Freescale Semiconductor, Inc.
+ * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef m5301x_h
+#define m5301x_h
+
+/* *** System Control Module (SCM) *** */
+#define SCM_MPR_MPROT0(x)		(((x) & 0x0F) << 28)
+#define SCM_MPR_MPROT1(x)		(((x) & 0x0F) << 24)
+#define SCM_MPR_MPROT2(x)		(((x) & 0x0F) << 20)
+#define SCM_MPR_MPROT4(x)		(((x) & 0x0F) << 12)
+#define SCM_MPR_MPROT5(x)		(((x) & 0x0F) << 8)
+#define SCM_MPR_MPROT6(x)		(((x) & 0x0F) << 4)
+#define MPROT_MTR			4
+#define MPROT_MTW			2
+#define MPROT_MPL			1
+
+#define SCM_PACRA_PACR0(x)		(((x) & 0x0F) << 28)
+#define SCM_PACRA_PACR1(x)		(((x) & 0x0F) << 24)
+#define SCM_PACRA_PACR2(x)		(((x) & 0x0F) << 20)
+#define SCM_PACRA_PACR5(x)		(((x) & 0x0F) << 8)
+
+#define SCM_PACRB_PACR12(x)		(((x) & 0x0F) << 12)
+#define SCM_PACRB_PACR13(x)		(((x) & 0x0F) << 8)
+
+#define SCM_PACRC_PACR16(x)		(((x) & 0x0F) << 28)
+#define SCM_PACRC_PACR17(x)		(((x) & 0x0F) << 24)
+#define SCM_PACRC_PACR18(x)		(((x) & 0x0F) << 20)
+#define SCM_PACRC_PACR19(x)		(((x) & 0x0F) << 16)
+#define SCM_PACRC_PACR21(x)		(((x) & 0x0F) << 8)
+#define SCM_PACRC_PACR22(x)		(((x) & 0x0F) << 4)
+#define SCM_PACRC_PACR23(x)		((x) & 0x0F)
+
+#define SCM_PACRD_PACR24(x)		(((x) & 0x0F) << 28)
+#define SCM_PACRD_PACR25(x)		(((x) & 0x0F) << 24)
+#define SCM_PACRD_PACR26(x)		(((x) & 0x0F) << 20)
+#define SCM_PACRD_PACR28(x)		(((x) & 0x0F) << 12)
+#define SCM_PACRD_PACR29(x)		(((x) & 0x0F) << 8)
+#define SCM_PACRD_PACR30(x)		(((x) & 0x0F) << 4)
+#define SCM_PACRD_PACR31(x)		((x) & 0x0F)
+
+#define SCM_PACRE_PACR32(x)		(((x) & 0x0F) << 28)
+#define SCM_PACRE_PACR33(x)		(((x) & 0x0F) << 24)
+#define SCM_PACRE_PACR34(x)		(((x) & 0x0F) << 20)
+#define SCM_PACRE_PACR35(x)		(((x) & 0x0F) << 16)
+#define SCM_PACRE_PACR36(x)		(((x) & 0x0F) << 12)
+#define SCM_PACRE_PACR37(x)		(((x) & 0x0F) << 8)
+#define SCM_PACRE_PACR39(x)		((x) & 0x0F)
+
+#define SCM_PACRF_PACR40(x)		(((x) & 0x0F) << 28)
+#define SCM_PACRF_PACR41(x)		(((x) & 0x0F) << 24)
+#define SCM_PACRF_PACR42(x)		(((x) & 0x0F) << 20)
+#define SCM_PACRF_PACR43(x)		(((x) & 0x0F) << 16)
+#define SCM_PACRF_PACR44(x)		(((x) & 0x0F) << 12)
+#define SCM_PACRF_PACR45(x)		(((x) & 0x0F) << 8)
+#define SCM_PACRF_PACR46(x)		(((x) & 0x0F) << 4)
+#define SCM_PACRF_PACR47(x)		((x) & 0x0F)
+
+#define SCM_PACRG_PACR48(x)		(((x) & 0x0F) << 28)
+#define SCM_PACRG_PACR49(x)		(((x) & 0x0F) << 24)
+#define SCM_PACRG_PACR50(x)		(((x) & 0x0F) << 20)
+#define SCM_PACRG_PACR51(x)		(((x) & 0x0F) << 16)
+
+#define PACR_SP	4
+#define PACR_WP	2
+#define PACR_TP	1
+
+#define SCM_CWCR_RO			(0x8000)
+#define SCM_CWCR_CWR_WH			(0x0100)
+#define SCM_CWCR_CWE			(0x0080)
+#define SCM_CWCR_CWRI_WINDOW		(0x0060)
+#define SCM_CWCR_CWRI_RESET		(0x0040)
+#define SCM_CWCR_CWRI_INT_RESET		(0x0020)
+#define SCM_CWCR_CWRI_INT		(0x0000)
+#define SCM_CWCR_CWT(x)			(((x) & 0x001F))
+
+#define SCM_ISR_CFEI			(0x02)
+#define SCM_ISR_CWIC			(0x01)
+
+#define BCR_GBR				(0x00000200)
+#define BCR_GBW				(0x00000100)
+#define BCR_S7				(0x00000080)
+#define BCR_S6				(0x00000040)
+#define BCR_S4				(0x00000010)
+#define BCR_S1				(0x00000002)
+
+#define SCM_CFIER_ECFEI			(0x01)
+
+#define SCM_CFLOC_LOC			(0x80)
+
+#define SCM_CFATR_WRITE			(0x80)
+#define SCM_CFATR_SZ32			(0x20)
+#define SCM_CFATR_SZ16			(0x10)
+#define SCM_CFATR_SZ08			(0x00)
+#define SCM_CFATR_CACHE			(0x08)
+#define SCM_CFATR_MODE			(0x02)
+#define SCM_CFATR_TYPE			(0x01)
+
+/* *** Interrupt Controller (INTC) *** */
+#define INT0_LO_RSVD0			(0)
+#define INT0_LO_EPORT1			(1)
+#define INT0_LO_EPORT2			(2)
+#define INT0_LO_EPORT3			(3)
+#define INT0_LO_EPORT4			(4)
+#define INT0_LO_EPORT5			(5)
+#define INT0_LO_EPORT6			(6)
+#define INT0_LO_EPORT7			(7)
+#define INT0_LO_EDMA_00			(8)
+#define INT0_LO_EDMA_01			(9)
+#define INT0_LO_EDMA_02			(10)
+#define INT0_LO_EDMA_03			(11)
+#define INT0_LO_EDMA_04			(12)
+#define INT0_LO_EDMA_05			(13)
+#define INT0_LO_EDMA_06			(14)
+#define INT0_LO_EDMA_07			(15)
+#define INT0_LO_EDMA_08			(16)
+#define INT0_LO_EDMA_09			(17)
+#define INT0_LO_EDMA_10			(18)
+#define INT0_LO_EDMA_11			(19)
+#define INT0_LO_EDMA_12			(20)
+#define INT0_LO_EDMA_13			(21)
+#define INT0_LO_EDMA_14			(22)
+#define INT0_LO_EDMA_15			(23)
+#define INT0_LO_EDMA_ERR		(24)
+#define INT0_LO_SCM_CWIC		(25)
+#define INT0_LO_UART0			(26)
+#define INT0_LO_UART1			(27)
+#define INT0_LO_UART2			(28)
+#define INT0_LO_RSVD1			(29)
+#define INT0_LO_I2C			(30)
+#define INT0_LO_DSPI			(31)
+#define INT0_HI_DTMR0			(32)
+#define INT0_HI_DTMR1			(33)
+#define INT0_HI_DTMR2			(34)
+#define INT0_HI_DTMR3			(35)
+#define INT0_HI_FEC0_TXF		(36)
+#define INT0_HI_FEC0_TXB		(37)
+#define INT0_HI_FEC0_UN			(38)
+#define INT0_HI_FEC0_RL			(39)
+#define INT0_HI_FEC0_RXF		(40)
+#define INT0_HI_FEC0_RXB		(41)
+#define INT0_HI_FEC0_MII		(42)
+#define INT0_HI_FEC0_LC			(43)
+#define INT0_HI_FEC0_HBERR		(44)
+#define INT0_HI_FEC0_GRA		(45)
+#define INT0_HI_FEC0_EBERR		(46)
+#define INT0_HI_FEC0_BABT		(47)
+#define INT0_HI_FEC0_BABR		(48)
+#define INT0_HI_FEC1_TXF		(49)
+#define INT0_HI_FEC1_TXB		(50)
+#define INT0_HI_FEC1_UN			(51)
+#define INT0_HI_FEC1_RL			(52)
+#define INT0_HI_FEC1_RXF		(53)
+#define INT0_HI_FEC1_RXB		(54)
+#define INT0_HI_FEC1_MII		(55)
+#define INT0_HI_FEC1_LC			(56)
+#define INT0_HI_FEC1_HBERR		(57)
+#define INT0_HI_FEC1_GRA		(58)
+#define INT0_HI_FEC1_EBERR		(59)
+#define INT0_HI_FEC1_BABT		(60)
+#define INT0_HI_FEC1_BABR		(61)
+#define INT0_HI_SCM_CFEI		(62)
+
+/* 0 - 24 reserved */
+#define INT1_LO_EPORT1_FLAG0		(25)
+#define INT1_LO_EPORT1_FLAG1		(26)
+#define INT1_LO_EPORT1_FLAG2		(27)
+#define INT1_LO_EPORT1_FLAG3		(28)
+#define INT1_LO_EPORT1_FLAG4		(29)
+#define INT1_LO_EPORT1_FLAG5		(30)
+#define INT1_LO_EPORT1_FLAG6		(31)
+#define INT1_LO_EPORT1_FLAG7		(32)
+#define INT1_HI_DSPI_EOQF		(33)
+#define INT1_HI_DSPI_TFFF		(34)
+#define INT1_HI_DSPI_TCF		(35)
+#define INT1_HI_DSPI_TFUF		(36)
+#define INT1_HI_DSPI_RFDF		(37)
+#define INT1_HI_DSPI_RFOF		(38)
+#define INT1_HI_DSPI_RFOF_TFUF		(39)
+#define INT1_HI_RNG_EI			(40)
+#define INT1_HI_PLL_LOCF		(41)
+#define INT1_HI_PLL_LOLF		(42)
+#define INT1_HI_PIT0			(43)
+#define INT1_HI_PIT1			(44)
+#define INT1_HI_PIT2			(45)
+#define INT1_HI_PIT3			(46)
+#define INT1_HI_USBOTG_STS		(47)
+#define INT1_HI_USBHOST_STS		(48)
+#define INT1_HI_SSI			(49)
+/* 50 - 51 reserved */
+#define INT1_HI_RTC			(52)
+#define INT1_HI_CCM_USBSTAT		(53)
+#define INT1_HI_CODEC_OR		(54)
+#define INT1_HI_CODEC_RF_TE		(55)
+#define INT1_HI_CODEC_ROE		(56)
+#define INT1_HI_CODEC_TUE		(57)
+/* 58 reserved */
+#define INT1_HI_SIM1_DATA		(59)
+#define INT1_HI_SIM1_GENERAL		(60)
+/* 61 - 62 reserved */
+#define INT1_HI_SDHC			(63)
+
+/* *** Reset Controller Module (RCM) *** */
+#define RCM_RCR_SOFTRST			(0x80)
+#define RCM_RCR_FRCRSTOUT		(0x40)
+
+#define RCM_RSR_SOFT			(0x20)
+#define RCM_RSR_LOC			(0x10)
+#define RCM_RSR_POR			(0x08)
+#define RCM_RSR_EXT			(0x04)
+#define RCM_RSR_WDR_CORE		(0x02)
+#define RCM_RSR_LOL			(0x01)
+
+/* *** Chip Configuration Module (CCM) *** */
+#define CCM_CCR_CSC			(0x0020)
+#define CCM_CCR_BOOTPS			(0x0010)
+#define CCM_CCR_LOAD			(0x0008)
+#define CCM_CCR_OSC_MODE		(0x0004)
+#define CCM_CCR_SDR_MODE		(0x0002)
+#define CCM_CCR_RESERVED		(0x0001)
+
+#define CCM_RCON_SDR_32BIT_UNIFIED	(0x0012)
+#define CCM_RCON_DDR_8BIT_SPLIT		(0x0010)
+#define CCM_RCON_SDR_16BIT_UNIFIED	(0x0002)
+#define CCM_RCON_DDR_16BIT_SPLIT	(0x0000)
+
+#define CCM_CIR_PIN(x)			(((x) & 0x03FF) << 6)
+#define CCM_CIR_PRN(x)			((x) & 0x003F)
+
+#define CCM_MISCCR_FECM			(0x8000)
+#define CCM_MISCCR_CDCSRC		(0x4000)
+#define CCM_MISCCR_PLL_LOCK		(0x2000)
+#define CCM_MISCCR_LIMP			(0x1000)
+#define CCM_MISCCR_BME			(0x8000)
+#define CCM_MISCCR_BMT_MASK		(0xF8FF)
+#define CCM_MISCCR_BMT(x)		(((x) & 0x0007) << 8)
+#define CCM_MISCCR_BMT_512		(0x0700)
+#define CCM_MISCCR_BMT_1024		(0x0600)
+#define CCM_MISCCR_BMT_2048		(0x0500)
+#define CCM_MISCCR_BMT_4096		(0x0400)
+#define CCM_MISCCR_BMT_8192		(0x0300)
+#define CCM_MISCCR_BMT_16384		(0x0200)
+#define CCM_MISCCR_BMT_32768		(0x0100)
+#define CCM_MISCCR_BMT_65536		(0x0000)
+#define CCM_MISCCR_TIM_DMA		(0x0020)
+#define CCM_MISCCR_SSI_SRC		(0x0010)
+#define CCM_MISCCR_USBH_OC		(0x0008)
+#define CCM_MISCCR_USBO_OC		(0x0004)
+#define CCM_MISCCR_USB_PUE		(0x0002)
+#define CCM_MISCCR_USB_SRC		(0x0001)
+
+#define CCM_CDR_LPDIV(x)		(((x) & 0x0F) << 8)
+#define CCM_CDR_SSIDIV(x)		((x) & 0xFF)
+
+#define CCM_UOCSR_DPPD			(0x2000)
+#define CCM_UOCSR_DMPD			(0x1000)
+#define CCM_UOCSR_DRV_VBUS		(0x0800)
+#define CCM_UOCSR_CRG_VBUS		(0x0400)
+#define CCM_UOCSR_DCR_VBUS		(0x0200)
+#define CCM_UOCSR_DPPU			(0x0100)
+#define CCM_UOCSR_AVLD			(0x0080)
+#define CCM_UOCSR_BVLD			(0x0040)
+#define CCM_UOCSR_VVLD			(0x0020)
+#define CCM_UOCSR_SEND			(0x0010)
+#define CCM_UOCSR_PWRFLT		(0x0008)
+#define CCM_UOCSR_WKUP			(0x0004)
+#define CCM_UOCSR_UOMIE			(0x0002)
+#define CCM_UOCSR_XPDE			(0x0001)
+
+#define CCM_UHCSR_PORTIND(x)		(((x) & 0x0003) << 14)
+#define CCM_UHCSR_DRV_VBUS		(0x0010)
+#define CCM_UHCSR_PWRFLT		(0x0008)
+#define CCM_UHCSR_WKUP			(0x0004)
+#define CCM_UHCSR_UHMIE			(0x0002)
+#define CCM_UHCSR_XPDE			(0x0001)
+
+#define CCM_CODCR_BGREN			(0x8000)
+#define CCM_CODCR_REGEN			(0x0080)
+
+#define CCM_MISC2_IGNLL			(0x0008)
+#define CCM_MISC2_DPS			(0x0001)
+
+/* *** General Purpose I/O (GPIO) *** */
+#define GPIO_PDR_FBCTL			((x) & 0x0F)
+#define GPIO_PDR_BE			((x) & 0x0F)
+#define GPIO_PDR_CS32			(((x) & 0x03) << 4)
+#define GPIO_PDR_CS10			(((x) & 0x03) << 4)
+#define GPIO_PDR_DSPI			((x) & 0x7F)
+#define GPIO_PDR_FEC0			((x) & 0x7F)
+#define GPIO_PDR_FECI2C			((x) & 0x3F)
+#define GPIO_PDR_SIMP1			((x) & 0x1F)
+#define GPIO_PDR_SIMP0			((x) & 0x1F)
+#define GPIO_PDR_TIMER			((x) & 0x0F)
+#define GPIO_PDR_UART			((x) & 0x3F)
+#define GPIO_PDR_DEBUG			(0x01)
+#define GPIO_PDR_SDHC			((x) & 0x3F)
+#define GPIO_PDR_SSI			((x) & 0x1F)
+
+#define GPIO_PAR_FBCTL_OE		(0x80)
+#define GPIO_PAR_FBCTL_TA		(0x40)
+#define GPIO_PAR_FBCTL_RWB		(0x20)
+#define GPIO_PAR_FBCTL_TS		(0x18)
+
+#define GPIO_PAR_BE3			(0x40)
+#define GPIO_PAR_BE2			(0x10)
+#define GPIO_PAR_BE1			(0x04)
+#define GPIO_PAR_BE0			(0x01)
+
+#define GPIO_PAR_CS5			(0x40)
+#define GPIO_PAR_CS4			(0x10)
+#define GPIO_PAR_CS1_MASK		(0xF3)
+#define GPIO_PAR_CS1_CS1		(0x0C)
+#define GPIO_PAR_CS1_SDCS1		(0x08)
+#define GPIO_PAR_CS0_MASK		(0xFC)
+#define GPIO_PAR_CS0_CS0		(0x03)
+#define GPIO_PAR_CS0_CS4		(0x02)
+
+#define GPIO_PAR_DSPIH_SIN_MASK		(0x3F)
+#define GPIO_PAR_DSPIH_SIN		(0xC0)
+#define GPIO_PAR_DSPIH_SIN_U2RXD	(0x80)
+#define GPIO_PAR_DSPIH_SOUT_MASK	(0xCF)
+#define GPIO_PAR_DSPIH_SOUT		(0x30)
+#define GPIO_PAR_DSPIH_SOUT_U2TXD	(0x20)
+#define GPIO_PAR_DSPIH_SCK_MASK		(0xF3)
+#define GPIO_PAR_DSPIH_SCK		(0x0C)
+#define GPIO_PAR_DSPIH_SCK_U2CTS	(0x08)
+#define GPIO_PAR_DSPIH_PCS0_MASK	(0xFC)
+#define GPIO_PAR_DSPIH_PCS0		(0x03)
+#define GPIO_PAR_DSPIH_PCS0_U2RTS	(0x02)
+
+#define GPIO_PAR_DSPIL_PCS1_MASK	(0x3F)
+#define GPIO_PAR_DSPIL_PCS1		(0xC0)
+#define GPIO_PAR_DSPIL_PCS2_MASK	(0xCF)
+#define GPIO_PAR_DSPIL_PCS2		(0x30)
+#define GPIO_PAR_DSPIL_PCS2_USBH_OC	(0x20)
+#define GPIO_PAR_DSPIL_PCS3_MASK	(0xF3)
+#define GPIO_PAR_DSPIL_PCS3		(0x0C)
+#define GPIO_PAR_DSPIL_PCS3_USBH_EN	(0x08)
+
+#define GPIO_PAR_FEC1_7W_FEC		(0x40)
+#define GPIO_PAR_FEC1_RMII_FEC		(0x10)
+#define GPIO_PAR_FEC0_7W_FEC		(0x04)
+#define GPIO_PAR_FEC0_RMII_FEC		(0x01)
+
+/* GPIO_PAR_FECI2C */
+#define GPIO_PAR_FECI2C_RMII0_MASK	(0x3F)
+#define GPIO_PAR_FECI2C_MDC0		(0x80)
+#define GPIO_PAR_FECI2C_MDIO0		(0x40)
+#define GPIO_PAR_FECI2C_RMII1_MASK	(0xCF)
+#define GPIO_PAR_FECI2C_MDC1		(0x20)
+#define GPIO_PAR_FECI2C_MDIO1		(0x10)
+#define GPIO_PAR_FECI2C_SDA_MASK	(0xF3)
+#define GPIO_PAR_FECI2C_SDA(x)		(((x) & 0x03) << 2)
+#define GPIO_PAR_FECI2C_SDA_SDA		(0x0C)
+#define GPIO_PAR_FECI2C_SDA_U2TXD	(0x08)
+#define GPIO_PAR_FECI2C_SDA_MDIO1	(0x04)
+#define GPIO_PAR_FECI2C_SCL_MASK	(0xFC)
+#define GPIO_PAR_FECI2C_SCL(x)		((x) & 0x03)
+#define GPIO_PAR_FECI2C_SCL_SCL		(0x03)
+#define GPIO_PAR_FECI2C_SCL_U2RXD	(0x02)
+#define GPIO_PAR_FECI2C_SCL_MDC1	(0x01)
+
+#define GPIO_PAR_IRQ0H_IRQ07_MASK	(0x3F)
+#define GPIO_PAR_IRQ0H_IRQ06_MASK	(0xCF)
+#define GPIO_PAR_IRQ0H_IRQ06_USBCLKIN	(0x10)
+#define GPIO_PAR_IRQ0H_IRQ04_MASK	(0xFC)
+#define GPIO_PAR_IRQ0H_IRQ04_DREQ0	(0x02)
+
+#define GPIO_PAR_IRQ0L_IRQ01_MASK	(0xF3)
+#define GPIO_PAR_IRQ0L_IRQ01_DREQ1	(0x08)
+
+#define GPIO_PAR_IRQ1H_IRQ17_DDATA3	(0x40)
+#define GPIO_PAR_IRQ1H_IRQ16_DDATA2	(0x10)
+#define GPIO_PAR_IRQ1H_IRQ15_DDATA1	(0x04)
+#define GPIO_PAR_IRQ1H_IRQ14_DDATA0	(0x01)
+
+#define GPIO_PAR_IRQ1L_IRQ13_PST3	(0x40)
+#define GPIO_PAR_IRQ1L_IRQ12_PST2	(0x10)
+#define GPIO_PAR_IRQ1L_IRQ11_PST1	(0x04)
+#define GPIO_PAR_IRQ1L_IRQ10_PST0	(0x01)
+
+#define GPIO_PAR_SIMP1H_DATA1_MASK	(0x3F)
+#define GPIO_PAR_SIMP1H_DATA1_SIMDATA1	(0xC0)
+#define GPIO_PAR_SIMP1H_DATA1_SSITXD	(0x80)
+#define GPIO_PAR_SIMP1H_DATA1_U1TXD	(0x40)
+#define GPIO_PAR_SIMP1H_VEN1_MASK	(0xCF)
+#define GPIO_PAR_SIMP1H_VEN1_SIMVEN1	(0x30)
+#define GPIO_PAR_SIMP1H_VEN1_SSIRXD	(0x20)
+#define GPIO_PAR_SIMP1H_VEN1_U1RXD	(0x10)
+#define GPIO_PAR_SIMP1H_RST1_MASK	(0xF3)
+#define GPIO_PAR_SIMP1H_RST1_SIMRST1	(0x0C)
+#define GPIO_PAR_SIMP1H_RST1_SSIFS	(0x08)
+#define GPIO_PAR_SIMP1H_RST1_U1RTS	(0x04)
+#define GPIO_PAR_SIMP1H_PD1_MASK	(0xFC)
+#define GPIO_PAR_SIMP1H_PD1_SIMPD1	(0x03)
+#define GPIO_PAR_SIMP1H_PD1_SSIBCLK	(0x02)
+#define GPIO_PAR_SIMP1H_PD1_U1CTS	(0x01)
+
+#define GPIO_PAR_SIMP1L_CLK_MASK	(0x3F)
+#define GPIO_PAR_SIMP1L_CLK_CLK1	(0xC0)
+#define GPIO_PAR_SIMP1L_CLK_SSIMCLK	(0x80)
+
+#define GPIO_PAR_SIMP0_DATA0		(0x10)
+#define GPIO_PAR_SIMP0_VEN0		(0x08)
+#define GPIO_PAR_SIMP0_RST0		(0x04)
+#define GPIO_PAR_SIMP0_PD0		(0x02)
+#define GPIO_PAR_SIMP0_CLK0		(0x01)
+
+#define GPIO_PAR_TIN3(x)		(((x) & 0x03) << 6)
+#define GPIO_PAR_TIN2(x)		(((x) & 0x03) << 4)
+#define GPIO_PAR_TIN1(x)		(((x) & 0x03) << 2)
+#define GPIO_PAR_TIN0(x)		((x) & 0x03)
+#define GPIO_PAR_TIN3_MASK		(0x3F)
+#define GPIO_PAR_TIN3_TIN3		(0xC0)
+#define GPIO_PAR_TIN3_TOUT3		(0x80)
+#define GPIO_PAR_TIN3_IRQ03		(0x40)
+#define GPIO_PAR_TIN2_MASK		(0xCF)
+#define GPIO_PAR_TIN2_TIN2		(0x30)
+#define GPIO_PAR_TIN2_TOUT2		(0x20)
+#define GPIO_PAR_TIN2_IRQ02		(0x10)
+#define GPIO_PAR_TIN1_MASK		(0xF3)
+#define GPIO_PAR_TIN1_TIN1		(0x0C)
+#define GPIO_PAR_TIN1_TOUT1		(0x08)
+#define GPIO_PAR_TIN1_DACK1		(0x04)
+#define GPIO_PAR_TIN0_MASK		(0xFC)
+#define GPIO_PAR_TIN0_TIN0		(0x03)
+#define GPIO_PAR_TIN0_TOUT0		(0x02)
+#define GPIO_PAR_TIN0_CODEC_ALTCLK	(0x01)
+
+#define GPIO_PAR_UART_U2TXD		(0x80)
+#define GPIO_PAR_UART_U2RXD		(0x40)
+#define GPIO_PAR_UART_U0TXD		(0x20)
+#define GPIO_PAR_UART_U0RXD		(0x10)
+#define GPIO_PAR_UART_RTS0(x)		(((x) & 0x03) << 2)
+#define GPIO_PAR_UART_CTS0(x)		((x) & 0x03)
+#define GPIO_PAR_UART_RTS0_MASK		(0xF3)
+#define GPIO_PAR_UART_RTS0_U0RTS	(0x0C)
+#define GPIO_PAR_UART_RTS0_USBO_VBOC	(0x08)
+#define GPIO_PAR_UART_CTS0_MASK		(0xFC)
+#define GPIO_PAR_UART_CTS0_U0CTS	(0x03)
+#define GPIO_PAR_UART_CTS0_USB0_VBEN	(0x02)
+#define GPIO_PAR_UART_CTS0_USB_PULLUP	(0x01)
+
+#define GPIO_PAR_DEBUG_ALLPST		(0x80)
+
+#define GPIO_PAR_SDHC_DATA3		(0x20)
+#define GPIO_PAR_SDHC_DATA2		(0x10)
+#define GPIO_PAR_SDHC_DATA1		(0x08)
+#define GPIO_PAR_SDHC_DATA0		(0x04)
+#define GPIO_PAR_SDHC_CMD		(0x02)
+#define GPIO_PAR_SDHC_CLK		(0x01)
+
+#define GPIO_PAR_SSIH_RXD(x)		(((x) & 0x03) << 6)
+#define GPIO_PAR_SSIH_TXD(x)		(((x) & 0x03) << 4)
+#define GPIO_PAR_SSIH_FS(x)		(((x) & 0x03) << 2)
+#define GPIO_PAR_SSIH_MCLK(x)		((x) & 0x03)
+#define GPIO_PAR_SSIH_RXD_MASK		(0x3F)
+#define GPIO_PAR_SSIH_RXD_SSIRXD	(0xC0)
+#define GPIO_PAR_SSIH_RXD_U1RXD		(0x40)
+#define GPIO_PAR_SSIH_TXD_MASK		(0xCF)
+#define GPIO_PAR_SSIH_TXD_SSIRXD	(0x30)
+#define GPIO_PAR_SSIH_TXD_U1TXD		(0x10)
+#define GPIO_PAR_SSIH_FS_MASK		(0xF3)
+#define GPIO_PAR_SSIH_FS_SSIFS		(0x0C)
+#define GPIO_PAR_SSIH_FS_U1RTS		(0x04)
+#define GPIO_PAR_SSIH_MCLK_MASK		(0xFC)
+#define GPIO_PAR_SSIH_MCLK_SSIMCLK	(0x03)
+#define GPIO_PAR_SSIH_MCLK_SSICLKIN	(0x01)
+
+#define GPIO_PAR_SSIL_MASK		(0x3F)
+#define GPIO_PAR_SSIL_BCLK		(0xC0)
+#define GPIO_PAR_SSIL_U1CTS		(0x40)
+
+#define GPIO_MSCR_MSCR1(x)		(((x) & 0x07) << 5)
+#define GPIO_MSCR_MSCR2(x)		(((x) & 0x07) << 5)
+#define GPIO_MSCR_MSCR3(x)		(((x) & 0x07) << 5)
+#define GPIO_MSCR_MSCR4(x)		(((x) & 0x07) << 5)
+#define GPIO_MSCR_MSCRn_MASK		(0x1F)
+#define GPIO_MSCR_MSCRn_SDR		(0xE0)
+#define GPIO_MSCR_MSCRn_25VDDR		(0x60)
+#define GPIO_MSCR_MSCRn_18VDDR_FULL	(0x20)
+#define GPIO_MSCR_MSCRn_18VDDR_HALF	(0x00)
+
+#define GPIO_MSCR_MSCR5(x)		(((x) & 0x07) << 2)
+#define GPIO_MSCR_MSCR5_MASK		(0xE3)
+#define GPIO_MSCR_MSCR5_SDR		(0x1C)
+#define GPIO_MSCR_MSCR5_25VDDR		(0x0C)
+#define GPIO_MSCR_MSCR5_18VDDR_FULL	(0x04)
+#define GPIO_MSCR_MSCR5_18VDDR_HALF	(0x00)
+
+#define GPIO_SRCR_DSPI_MASK		(0xFC)
+#define GPIO_SRCR_DSPI(x)		((x) & 0x03)
+#define GPIO_SRCR_I2C_MASK		(0xFC)
+#define GPIO_SRCR_I2C(x)		((x) & 0x03)
+#define GPIO_SRCR_IRQ_IRQ0_MASK		(0xF3)
+#define GPIO_SRCR_IRQ_IRQ0(x)		(((x) & 0x03) << 2)
+#define GPIO_SRCR_IRQ_IRQ1DBG_MASK	(0xFC)
+#define GPIO_SRCR_IRQ_IRQ1DBG(x)	((x) & 0x03)
+#define GPIO_SRCR_SIM_SIMP0_MASK	(0xF3)
+#define GPIO_SRCR_SIM_SIMP0(x)		(((x) & 0x03) << 2)
+#define GPIO_SRCR_SIM_SIMP1_MASK	(0xFC)
+#define GPIO_SRCR_SIM_SIMP1(x)		((x) & 0x03)
+#define GPIO_SRCR_TIMER_MASK		(0xFC)
+#define GPIO_SRCR_TIMER(x)		((x) & 0x03)
+#define GPIO_SRCR_UART2_MASK		(0xF3)
+#define GPIO_SRCR_UART2(x)		(((x) & 0x03) << 2)
+#define GPIO_SRCR_UART0_MASK		(0xFC)
+#define GPIO_SRCR_UART0(x)		((x) & 0x03)
+#define GPIO_SRCR_SDHC_MASK		(0xFC)
+#define GPIO_SRCR_SDHC(x)		((x) & 0x03)
+#define GPIO_SRCR_SSI_MASK		(0xFC)
+#define GPIO_SRCR_SSI(x)		((x) & 0x03)
+
+#define SRCR_HIGHEST			(0x03)
+#define SRCR_HIGH			(0x02)
+#define SRCR_LOW			(0x01)
+#define SRCR_LOWEST			(0x00)
+
+#define GPIO_DSCR_FEC_RMIICLK_MASK	(0xCF)
+#define GPIO_DSCR_FEC_RMIICLK(x)	(((x) & 0x03) << 4)
+#define GPIO_DSCR_FEC_RMII0_MASK	(0xF3)
+#define GPIO_DSCR_FEC_RMII0(x)		(((x) & 0x03) << 2)
+#define GPIO_DSCR_FEC_RMII1_MASK	(0xFC)
+#define GPIO_DSCR_FEC_RMII1(x)		((x) & 0x03)
+
+#define DSCR_50PF			(0x03)
+#define DSCR_30PF			(0x02)
+#define DSCR_20PF			(0x01)
+#define DSCR_10PF			(0x00)
+
+#define GPIO_PCRH_DSPI_PCS0_PULLUP_EN	(0x80)
+#define GPIO_PCRH_SIM_VEN1_PULLUP_EN	(0x40)
+#define GPIO_PCRH_SIM_VEN1_PULLUP	(0x20)
+#define GPIO_PCRH_SIM_DATA1_PULLUP_EN	(0x10)
+#define GPIO_PCRH_SIM_DATA1_PULLUP	(0x08)
+#define GPIO_PCRH_SSI_PULLUP_EN		(0x02)
+#define GPIO_PCRH_SSI_PULLUP		(0x01)
+
+#define GPIO_PCRL_SDHC_DATA3_PULLUP_EN	(0x80)
+#define GPIO_PCRL_SDHC_DATA3_PULLUP	(0x40)
+#define GPIO_PCRL_SDHC_DATA2_PULLUP_EN	(0x20)
+#define GPIO_PCRL_SDHC_DATA1_PULLUP_EN	(0x10)
+#define GPIO_PCRL_SDHC_DATA0_PULLUP_EN	(0x08)
+#define GPIO_PCRL_SDHC_CMD_PULLUP_EN	(0x04)
+
+/* *** Phase Locked Loop (PLL) *** */
+#define PLL_PCR_LOC_IRQ			(0x00040000)
+#define PLL_PCR_LOC_RE			(0x00020000)
+#define PLL_PCR_LOC_EN			(0x00010000)
+#define PLL_PCR_LOL_IRQ			(0x00004000)
+#define PLL_PCR_LOL_RE			(0x00002000)
+#define PLL_PCR_LOL_EN			(0x00001000)
+#define PLL_PCR_REFDIV_MASK		(0xFFFFF8FF)
+#define PLL_PCR_REFDIV(x)		(((x) & 0x07) << 8)
+#define PLL_PCR_FBDIV_MASK		(0xFFFFFFC0)
+#define PLL_PCR_FBDIV(x)		((x) & 0x3F)
+
+#define PLL_PDR_OUTDIV4_MASK		(0x0FFF)
+#define PLL_PDR_OUTDIV4(x)		(((x) & 0x0000000F) << 12)
+#define PLL_PDR_OUTDIV3_MASK		(0xF0FF)
+#define PLL_PDR_OUTDIV3(x)		(((x) & 0x0000000F) << 8)
+#define PLL_PDR_OUTDIV2_MASK		(0xFF0F)
+#define PLL_PDR_OUTDIV2(x)		(((x) & 0x0000000F) << 4)
+#define PLL_PDR_OUTDIV1_MASK		(0xFFF0)
+#define PLL_PDR_OUTDIV1(x)		((x) & 0x0000000F)
+#define PLL_PDR_USB(x)			PLL_PDR_OUTDIV4(x)
+#define PLL_PDR_SDRAM(x)		PLL_PDR_OUTDIV3(x)
+#define PLL_PDR_FB(x)			PLL_PDR_OUTDIV2(x)
+#define PLL_PDR_CPU(x)			PLL_PDR_OUTDIV1(x)
+
+#define PLL_PSR_LOCF			(0x00000200)
+#define PLL_PSR_LOC			(0x00000100)
+#define PLL_PSR_LOLF			(0x00000040)
+#define PLL_PSR_LOCKS			(0x00000020)
+#define PLL_PSR_LOCK			(0x00000010)
+#define PLL_PSR_MODE(x)			((x) & 0x07)
+
+/* *** Real Time Clock *** */
+#define RTC_OCEN_OSCBYP			(0x00000010)
+#define RTC_OCEN_CLKEN			(0x00000008)
+
+#endif				/* m5301x_h */
diff --git a/include/asm-m68k/m5329.h b/include/asm-m68k/m5329.h
index c1669dcb1..c7ebed137 100644
--- a/include/asm-m68k/m5329.h
+++ b/include/asm-m68k/m5329.h
@@ -187,65 +187,6 @@
 #define CFATR_TYPE			(0x01)
 
 /*********************************************************************
-* FlexBus Chip Selects (FBCS)
-*********************************************************************/
-/* Bit definitions and macros for FBCS_CSAR */
-#define CSAR_BA(x)			(((x)&0xFFFF)<<16)
-
-/* Bit definitions and macros for FBCS_CSMR */
-#define CSMR_BAM(x)			(((x)&0xFFFF)<<16)
-#define CSMR_BAM_4G			(0xFFFF0000)
-#define CSMR_BAM_2G			(0x7FFF0000)
-#define CSMR_BAM_1G			(0x3FFF0000)
-#define CSMR_BAM_1024M			(0x3FFF0000)
-#define CSMR_BAM_512M			(0x1FFF0000)
-#define CSMR_BAM_256M			(0x0FFF0000)
-#define CSMR_BAM_128M			(0x07FF0000)
-#define CSMR_BAM_64M			(0x03FF0000)
-#define CSMR_BAM_32M			(0x01FF0000)
-#define CSMR_BAM_16M			(0x00FF0000)
-#define CSMR_BAM_8M			(0x007F0000)
-#define CSMR_BAM_4M			(0x003F0000)
-#define CSMR_BAM_2M			(0x001F0000)
-#define CSMR_BAM_1M			(0x000F0000)
-#define CSMR_BAM_1024K			(0x000F0000)
-#define CSMR_BAM_512K			(0x00070000)
-#define CSMR_BAM_256K			(0x00030000)
-#define CSMR_BAM_128K			(0x00010000)
-#define CSMR_BAM_64K			(0x00000000)
-#define CSMR_WP				(0x00000100)
-#define CSMR_V				(0x00000001)
-
-/* Bit definitions and macros for FBCS_CSCR */
-#define CSCR_SWS(x)			(((x)&0x3F)<<26)
-#define CSCR_ASET(x)			(((x)&0x03)<<20)
-#define CSCR_SWSEN			(0x00800000)
-#define CSCR_ASET_4CLK			(0x00300000)
-#define CSCR_ASET_3CLK			(0x00200000)
-#define CSCR_ASET_2CLK			(0x00100000)
-#define CSCR_ASET_1CLK			(0x00000000)
-#define CSCR_RDAH(x)			(((x)&0x03)<<18)
-#define CSCR_RDAH_4CYC			(0x000C0000)
-#define CSCR_RDAH_3CYC			(0x00080000)
-#define CSCR_RDAH_2CYC			(0x00040000)
-#define CSCR_RDAH_1CYC			(0x00000000)
-#define CSCR_WRAH(x)			(((x)&0x03)<<16)
-#define CSCR_WDAH_4CYC			(0x00003000)
-#define CSCR_WDAH_3CYC			(0x00002000)
-#define CSCR_WDAH_2CYC			(0x00001000)
-#define CSCR_WDAH_1CYC			(0x00000000)
-#define CSCR_WS(x)			(((x)&0x3F)<<10)
-#define CSCR_SBM			(0x00000200)
-#define CSCR_AA				(0x00000100)
-#define CSCR_PS_MASK			(0x000000C0)
-#define CSCR_PS_32			(0x00000000)
-#define CSCR_PS_16			(0x00000080)
-#define CSCR_PS_8			(0x00000040)
-#define CSCR_BEM			(0x00000020)
-#define CSCR_BSTR			(0x00000010)
-#define CSCR_BSTW			(0x00000008)
-
-/*********************************************************************
 * Reset Controller Module (RCM)
 *********************************************************************/
 
@@ -261,100 +202,6 @@
 #define RCM_RSR_SOFT			(0x20)
 
 /*********************************************************************
-* FlexCAN Module (CAN)
-*********************************************************************/
-/* Bit definitions and macros for CAN_CANMCR */
-#define CANMCR_MDIS			(0x80000000)
-#define CANMCR_FRZ			(0x40000000)
-#define CANMCR_HALT			(0x10000000)
-#define CANMCR_NORDY			(0x08000000)
-#define CANMCR_SOFTRST			(0x02000000)
-#define CANMCR_FRZACK			(0x01000000)
-#define CANMCR_SUPV			(0x00800000)
-#define CANMCR_LPMACK			(0x00100000)
-#define CANMCR_MAXMB(x)			(((x)&0x0F))
-
-/* Bit definitions and macros for CAN_CANCTRL */
-#define CANCTRL_PRESDIV(x)		(((x)&0xFF)<<24)
-#define CANCTRL_RJW(x)			(((x)&0x03)<<22)
-#define CANCTRL_PSEG1(x)		(((x)&0x07)<<19)
-#define CANCTRL_PSEG2(x)		(((x)&0x07)<<16)
-#define CANCTRL_BOFFMSK			(0x00008000)
-#define CANCTRL_ERRMSK			(0x00004000)
-#define CANCTRL_CLKSRC			(0x00002000)
-#define CANCTRL_LPB			(0x00001000)
-#define CANCTRL_SMP			(0x00000080)
-#define CANCTRL_BOFFREC			(0x00000040)
-#define CANCTRL_TSYNC			(0x00000020)
-#define CANCTRL_LBUF			(0x00000010)
-#define CANCTRL_LOM			(0x00000008)
-#define CANCTRL_PROPSEG(x)		(((x)&0x07))
-
-/* Bit definitions and macros for CAN_TIMER */
-#define TIMER_TIMER(x)			((x)&0xFFFF)
-
-/* Bit definitions and macros for CAN_RXGMASK */
-#define RXGMASK_MI(x)			((x)&0x1FFFFFFF)
-
-/* Bit definitions and macros for CAN_ERRCNT */
-#define ERRCNT_TXECTR(x)		(((x)&0xFF))
-#define ERRCNT_RXECTR(x)		(((x)&0xFF)<<8)
-
-/* Bit definitions and macros for CAN_ERRSTAT */
-#define ERRSTAT_BITERR1			(0x00008000)
-#define ERRSTAT_BITERR0			(0x00004000)
-#define ERRSTAT_ACKERR			(0x00002000)
-#define ERRSTAT_CRCERR			(0x00001000)
-#define ERRSTAT_FRMERR			(0x00000800)
-#define ERRSTAT_STFERR			(0x00000400)
-#define ERRSTAT_TXWRN			(0x00000200)
-#define ERRSTAT_RXWRN			(0x00000100)
-#define ERRSTAT_IDLE			(0x00000080)
-#define ERRSTAT_TXRX			(0x00000040)
-#define ERRSTAT_FLT_BUSOFF		(0x00000020)
-#define ERRSTAT_FLT_PASSIVE		(0x00000010)
-#define ERRSTAT_FLT_ACTIVE		(0x00000000)
-#define ERRSTAT_BOFFINT			(0x00000004)
-#define ERRSTAT_ERRINT			(0x00000002)
-#define ERRSTAT_WAKINT			(0x00000001)
-
-/* Bit definitions and macros for CAN_IMASK */
-#define IMASK_BUF15M			(0x00008000)
-#define IMASK_BUF14M			(0x00004000)
-#define IMASK_BUF13M			(0x00002000)
-#define IMASK_BUF12M			(0x00001000)
-#define IMASK_BUF11M			(0x00000800)
-#define IMASK_BUF10M			(0x00000400)
-#define IMASK_BUF9M			(0x00000200)
-#define IMASK_BUF8M			(0x00000100)
-#define IMASK_BUF7M			(0x00000080)
-#define IMASK_BUF6M			(0x00000040)
-#define IMASK_BUF5M			(0x00000020)
-#define IMASK_BUF4M			(0x00000010)
-#define IMASK_BUF3M			(0x00000008)
-#define IMASK_BUF2M			(0x00000004)
-#define IMASK_BUF1M			(0x00000002)
-#define IMASK_BUF0M			(0x00000001)
-
-/* Bit definitions and macros for CAN_IFLAG */
-#define IFLAG_BUF15I			(0x00008000)
-#define IFLAG_BUF14I			(0x00004000)
-#define IFLAG_BUF13I			(0x00002000)
-#define IFLAG_BUF12I			(0x00001000)
-#define IFLAG_BUF11I			(0x00000800)
-#define IFLAG_BUF10I			(0x00000400)
-#define IFLAG_BUF9I			(0x00000200)
-#define IFLAG_BUF8I			(0x00000100)
-#define IFLAG_BUF7I			(0x00000080)
-#define IFLAG_BUF6I			(0x00000040)
-#define IFLAG_BUF5I			(0x00000020)
-#define IFLAG_BUF4I			(0x00000010)
-#define IFLAG_BUF3I			(0x00000008)
-#define IFLAG_BUF2I			(0x00000004)
-#define IFLAG_BUF1I			(0x00000002)
-#define IFLAG_BUF0I			(0x00000001)
-
-/*********************************************************************
 * Interrupt Controller (INTC)
 *********************************************************************/
 #define INTC0_EPORT			INTC_IPRL_INT1
@@ -411,200 +258,6 @@
 /* 49 - 61 Reserved */
 #define INT0_HI_SCM			(62)
 
-/* Bit definitions and macros for INTC_IPRH */
-#define INTC_IPRH_INT63			(0x80000000)
-#define INTC_IPRH_INT62			(0x40000000)
-#define INTC_IPRH_INT61			(0x20000000)
-#define INTC_IPRH_INT60			(0x10000000)
-#define INTC_IPRH_INT59			(0x08000000)
-#define INTC_IPRH_INT58			(0x04000000)
-#define INTC_IPRH_INT57			(0x02000000)
-#define INTC_IPRH_INT56			(0x01000000)
-#define INTC_IPRH_INT55			(0x00800000)
-#define INTC_IPRH_INT54			(0x00400000)
-#define INTC_IPRH_INT53			(0x00200000)
-#define INTC_IPRH_INT52			(0x00100000)
-#define INTC_IPRH_INT51			(0x00080000)
-#define INTC_IPRH_INT50			(0x00040000)
-#define INTC_IPRH_INT49			(0x00020000)
-#define INTC_IPRH_INT48			(0x00010000)
-#define INTC_IPRH_INT47			(0x00008000)
-#define INTC_IPRH_INT46			(0x00004000)
-#define INTC_IPRH_INT45			(0x00002000)
-#define INTC_IPRH_INT44			(0x00001000)
-#define INTC_IPRH_INT43			(0x00000800)
-#define INTC_IPRH_INT42			(0x00000400)
-#define INTC_IPRH_INT41			(0x00000200)
-#define INTC_IPRH_INT40			(0x00000100)
-#define INTC_IPRH_INT39			(0x00000080)
-#define INTC_IPRH_INT38			(0x00000040)
-#define INTC_IPRH_INT37			(0x00000020)
-#define INTC_IPRH_INT36			(0x00000010)
-#define INTC_IPRH_INT35			(0x00000008)
-#define INTC_IPRH_INT34			(0x00000004)
-#define INTC_IPRH_INT33			(0x00000002)
-#define INTC_IPRH_INT32			(0x00000001)
-
-/* Bit definitions and macros for INTC_IPRL */
-#define INTC_IPRL_INT31			(0x80000000)
-#define INTC_IPRL_INT30			(0x40000000)
-#define INTC_IPRL_INT29			(0x20000000)
-#define INTC_IPRL_INT28			(0x10000000)
-#define INTC_IPRL_INT27			(0x08000000)
-#define INTC_IPRL_INT26			(0x04000000)
-#define INTC_IPRL_INT25			(0x02000000)
-#define INTC_IPRL_INT24			(0x01000000)
-#define INTC_IPRL_INT23			(0x00800000)
-#define INTC_IPRL_INT22			(0x00400000)
-#define INTC_IPRL_INT21			(0x00200000)
-#define INTC_IPRL_INT20			(0x00100000)
-#define INTC_IPRL_INT19			(0x00080000)
-#define INTC_IPRL_INT18			(0x00040000)
-#define INTC_IPRL_INT17			(0x00020000)
-#define INTC_IPRL_INT16			(0x00010000)
-#define INTC_IPRL_INT15			(0x00008000)
-#define INTC_IPRL_INT14			(0x00004000)
-#define INTC_IPRL_INT13			(0x00002000)
-#define INTC_IPRL_INT12			(0x00001000)
-#define INTC_IPRL_INT11			(0x00000800)
-#define INTC_IPRL_INT10			(0x00000400)
-#define INTC_IPRL_INT9			(0x00000200)
-#define INTC_IPRL_INT8			(0x00000100)
-#define INTC_IPRL_INT7			(0x00000080)
-#define INTC_IPRL_INT6			(0x00000040)
-#define INTC_IPRL_INT5			(0x00000020)
-#define INTC_IPRL_INT4			(0x00000010)
-#define INTC_IPRL_INT3			(0x00000008)
-#define INTC_IPRL_INT2			(0x00000004)
-#define INTC_IPRL_INT1			(0x00000002)
-#define INTC_IPRL_INT0			(0x00000001)
-
-/* Bit definitions and macros for INTC_ICONFIG */
-#define INTC_ICFG_ELVLPRI7		(0x8000)
-#define INTC_ICFG_ELVLPRI6		(0x4000)
-#define INTC_ICFG_ELVLPRI5		(0x2000)
-#define INTC_ICFG_ELVLPRI4		(0x1000)
-#define INTC_ICFG_ELVLPRI3		(0x0800)
-#define INTC_ICFG_ELVLPRI2		(0x0400)
-#define INTC_ICFG_ELVLPRI1		(0x0200)
-#define INTC_ICFG_EMASK			(0x0020)
-
-/* Bit definitions and macros for INTC_SIMR */
-#define INTC_SIMR_SALL			(0x40)
-#define INTC_SIMR_SIMR(x)		((x)&0x3F)
-
-/* Bit definitions and macros for INTC_CIMR */
-#define INTC_CIMR_CALL			(0x40)
-#define INTC_CIMR_CIMR(x)		((x)&0x3F)
-
-/* Bit definitions and macros for INTC_CLMASK */
-#define INTC_CLMASK_CLMASK(x)		((x)&0x0F)
-
-/* Bit definitions and macros for INTC_SLMASK */
-#define INTC_SLMASK_SLMASK(x)		((x)&0x0F)
-
-/* Bit definitions and macros for INTC_ICR */
-#define INTC_ICR_IL(x)			((x)&0x07)
-
-/*********************************************************************
-* Queued Serial Peripheral Interface (QSPI)
-*********************************************************************/
-/* Bit definitions and macros for QSPI_QMR */
-#define QSPI_QMR_MSTR			(0x8000)
-#define QSPI_QMR_DOHIE			(0x4000)
-#define QSPI_QMR_BITS(x)		(((x)&0x000F)<<10)
-#define QSPI_QMR_CPOL			(0x0200)
-#define QSPI_QMR_CPHA			(0x0100)
-#define QSPI_QMR_BAUD(x)		((x)&0x00FF)
-
-/* Bit definitions and macros for QSPI_QDLYR */
-#define QSPI_QDLYR_SPE			(0x8000)
-#define QSPI_QDLYR_QCD(x)		(((x)&0x007F)<<8)
-#define QSPI_QDLYR_DTL(x)		((x)&0x00FF)
-
-/* Bit definitions and macros for QSPI_QWR */
-#define QSPI_QWR_NEWQP(x)		((x)&0x000F)
-#define QSPI_QWR_ENDQP(x)		(((x)&0x000F)<<8)
-#define QSPI_QWR_CSIV			(0x1000)
-#define QSPI_QWR_WRTO			(0x2000)
-#define QSPI_QWR_WREN			(0x4000)
-#define QSPI_QWR_HALT			(0x8000)
-
-/* Bit definitions and macros for QSPI_QIR */
-#define QSPI_QIR_WCEFB			(0x8000)
-#define QSPI_QIR_ABRTB			(0x4000)
-#define QSPI_QIR_ABRTL			(0x1000)
-#define QSPI_QIR_WCEFE			(0x0800)
-#define QSPI_QIR_ABRTE			(0x0400)
-#define QSPI_QIR_SPIFE			(0x0100)
-#define QSPI_QIR_WCEF			(0x0008)
-#define QSPI_QIR_ABRT			(0x0004)
-#define QSPI_QIR_SPIF			(0x0001)
-
-/* Bit definitions and macros for QSPI_QAR */
-#define QSPI_QAR_ADDR(x)		((x)&0x003F)
-#define QSPI_QAR_TRANS			(0x0000)
-#define QSPI_QAR_RECV			(0x0010)
-#define QSPI_QAR_CMD			(0x0020)
-
-/* Bit definitions and macros for QSPI_QDR */
-#define QSPI_QDR_CONT			(0x8000)
-#define QSPI_QDR_BITSE			(0x4000)
-#define QSPI_QDR_DT			(0x2000)
-#define QSPI_QDR_DSCK			(0x1000)
-#define QSPI_QDR_QSPI_CS3		(0x0800)
-#define QSPI_QDR_QSPI_CS2		(0x0400)
-#define QSPI_QDR_QSPI_CS1		(0x0200)
-#define QSPI_QDR_QSPI_CS0		(0x0100)
-
-/*********************************************************************
-* Pulse Width Modulation (PWM)
-*********************************************************************/
-/* Bit definitions and macros for PWM_E */
-#define PWM_EN_PWME7			(0x80)
-#define PWM_EN_PWME5			(0x20)
-#define PWM_EN_PWME3			(0x08)
-#define PWM_EN_PWME1			(0x02)
-
-/* Bit definitions and macros for PWM_POL */
-#define PWM_POL_PPOL7			(0x80)
-#define PWM_POL_PPOL5			(0x20)
-#define PWM_POL_PPOL3			(0x08)
-#define PWM_POL_PPOL1			(0x02)
-
-/* Bit definitions and macros for PWM_CLK */
-#define PWM_CLK_PCLK7			(0x80)
-#define PWM_CLK_PCLK5			(0x20)
-#define PWM_CLK_PCLK3			(0x08)
-#define PWM_CLK_PCLK1			(0x02)
-
-/* Bit definitions and macros for PWM_PRCLK */
-#define PWM_PRCLK_PCKB(x)		(((x)&0x07)<<4)
-#define PWM_PRCLK_PCKA(x)		((x)&0x07)
-
-/* Bit definitions and macros for PWM_CAE */
-#define PWM_CAE_CAE7			(0x80)
-#define PWM_CAE_CAE5			(0x20)
-#define PWM_CAE_CAE3			(0x08)
-#define PWM_CAE_CAE1			(0x02)
-
-/* Bit definitions and macros for PWM_CTL */
-#define PWM_CTL_CON67			(0x80)
-#define PWM_CTL_CON45			(0x40)
-#define PWM_CTL_CON23			(0x20)
-#define PWM_CTL_CON01			(0x10)
-#define PWM_CTL_PSWAR			(0x08)
-#define PWM_CTL_PFRZ			(0x04)
-
-/* Bit definitions and macros for PWM_SDN */
-#define PWM_SDN_IF			(0x80)
-#define PWM_SDN_IE			(0x40)
-#define PWM_SDN_RESTART			(0x20)
-#define PWM_SDN_LVL			(0x10)
-#define PWM_SDN_PWM7IN			(0x04)
-#define PWM_SDN_PWM7IL			(0x02)
-#define PWM_SDN_SDNEN			(0x01)
-
 /*********************************************************************
 * Watchdog Timer Modules (WTM)
 *********************************************************************/
diff --git a/include/asm-m68k/m5445x.h b/include/asm-m68k/m5445x.h
index 7fcf4ef7d..596662191 100644
--- a/include/asm-m68k/m5445x.h
+++ b/include/asm-m68k/m5445x.h
@@ -114,325 +114,6 @@
 #define INT1_HI_PCI_ASR			(56)
 #define INT1_HI_PLL_LOCKS		(57)
 
-/* Bit definitions and macros for IPRH */
-#define INTC_IPRH_INT32			(0x00000001)
-#define INTC_IPRH_INT33			(0x00000002)
-#define INTC_IPRH_INT34			(0x00000004)
-#define INTC_IPRH_INT35			(0x00000008)
-#define INTC_IPRH_INT36			(0x00000010)
-#define INTC_IPRH_INT37			(0x00000020)
-#define INTC_IPRH_INT38			(0x00000040)
-#define INTC_IPRH_INT39			(0x00000080)
-#define INTC_IPRH_INT40			(0x00000100)
-#define INTC_IPRH_INT41			(0x00000200)
-#define INTC_IPRH_INT42			(0x00000400)
-#define INTC_IPRH_INT43			(0x00000800)
-#define INTC_IPRH_INT44			(0x00001000)
-#define INTC_IPRH_INT45			(0x00002000)
-#define INTC_IPRH_INT46			(0x00004000)
-#define INTC_IPRH_INT47			(0x00008000)
-#define INTC_IPRH_INT48			(0x00010000)
-#define INTC_IPRH_INT49			(0x00020000)
-#define INTC_IPRH_INT50			(0x00040000)
-#define INTC_IPRH_INT51			(0x00080000)
-#define INTC_IPRH_INT52			(0x00100000)
-#define INTC_IPRH_INT53			(0x00200000)
-#define INTC_IPRH_INT54			(0x00400000)
-#define INTC_IPRH_INT55			(0x00800000)
-#define INTC_IPRH_INT56			(0x01000000)
-#define INTC_IPRH_INT57			(0x02000000)
-#define INTC_IPRH_INT58			(0x04000000)
-#define INTC_IPRH_INT59			(0x08000000)
-#define INTC_IPRH_INT60			(0x10000000)
-#define INTC_IPRH_INT61			(0x20000000)
-#define INTC_IPRH_INT62			(0x40000000)
-#define INTC_IPRH_INT63			(0x80000000)
-
-/* Bit definitions and macros for IPRL */
-#define INTC_IPRL_INT0			(0x00000001)
-#define INTC_IPRL_INT1			(0x00000002)
-#define INTC_IPRL_INT2			(0x00000004)
-#define INTC_IPRL_INT3			(0x00000008)
-#define INTC_IPRL_INT4			(0x00000010)
-#define INTC_IPRL_INT5			(0x00000020)
-#define INTC_IPRL_INT6			(0x00000040)
-#define INTC_IPRL_INT7			(0x00000080)
-#define INTC_IPRL_INT8			(0x00000100)
-#define INTC_IPRL_INT9			(0x00000200)
-#define INTC_IPRL_INT10			(0x00000400)
-#define INTC_IPRL_INT11			(0x00000800)
-#define INTC_IPRL_INT12			(0x00001000)
-#define INTC_IPRL_INT13			(0x00002000)
-#define INTC_IPRL_INT14			(0x00004000)
-#define INTC_IPRL_INT15			(0x00008000)
-#define INTC_IPRL_INT16			(0x00010000)
-#define INTC_IPRL_INT17			(0x00020000)
-#define INTC_IPRL_INT18			(0x00040000)
-#define INTC_IPRL_INT19			(0x00080000)
-#define INTC_IPRL_INT20			(0x00100000)
-#define INTC_IPRL_INT21			(0x00200000)
-#define INTC_IPRL_INT22			(0x00400000)
-#define INTC_IPRL_INT23			(0x00800000)
-#define INTC_IPRL_INT24			(0x01000000)
-#define INTC_IPRL_INT25			(0x02000000)
-#define INTC_IPRL_INT26			(0x04000000)
-#define INTC_IPRL_INT27			(0x08000000)
-#define INTC_IPRL_INT28			(0x10000000)
-#define INTC_IPRL_INT29			(0x20000000)
-#define INTC_IPRL_INT30			(0x40000000)
-#define INTC_IPRL_INT31			(0x80000000)
-
-/* Bit definitions and macros for IMRH */
-#define INTC_IMRH_INT_MASK32		(0x00000001)
-#define INTC_IMRH_INT_MASK33		(0x00000002)
-#define INTC_IMRH_INT_MASK34		(0x00000004)
-#define INTC_IMRH_INT_MASK35		(0x00000008)
-#define INTC_IMRH_INT_MASK36		(0x00000010)
-#define INTC_IMRH_INT_MASK37		(0x00000020)
-#define INTC_IMRH_INT_MASK38		(0x00000040)
-#define INTC_IMRH_INT_MASK39		(0x00000080)
-#define INTC_IMRH_INT_MASK40		(0x00000100)
-#define INTC_IMRH_INT_MASK41		(0x00000200)
-#define INTC_IMRH_INT_MASK42		(0x00000400)
-#define INTC_IMRH_INT_MASK43		(0x00000800)
-#define INTC_IMRH_INT_MASK44		(0x00001000)
-#define INTC_IMRH_INT_MASK45		(0x00002000)
-#define INTC_IMRH_INT_MASK46		(0x00004000)
-#define INTC_IMRH_INT_MASK47		(0x00008000)
-#define INTC_IMRH_INT_MASK48		(0x00010000)
-#define INTC_IMRH_INT_MASK49		(0x00020000)
-#define INTC_IMRH_INT_MASK50		(0x00040000)
-#define INTC_IMRH_INT_MASK51		(0x00080000)
-#define INTC_IMRH_INT_MASK52		(0x00100000)
-#define INTC_IMRH_INT_MASK53		(0x00200000)
-#define INTC_IMRH_INT_MASK54		(0x00400000)
-#define INTC_IMRH_INT_MASK55		(0x00800000)
-#define INTC_IMRH_INT_MASK56		(0x01000000)
-#define INTC_IMRH_INT_MASK57		(0x02000000)
-#define INTC_IMRH_INT_MASK58		(0x04000000)
-#define INTC_IMRH_INT_MASK59		(0x08000000)
-#define INTC_IMRH_INT_MASK60		(0x10000000)
-#define INTC_IMRH_INT_MASK61		(0x20000000)
-#define INTC_IMRH_INT_MASK62		(0x40000000)
-#define INTC_IMRH_INT_MASK63		(0x80000000)
-
-/* Bit definitions and macros for IMRL */
-#define INTC_IMRL_INT_MASK0		(0x00000001)
-#define INTC_IMRL_INT_MASK1		(0x00000002)
-#define INTC_IMRL_INT_MASK2		(0x00000004)
-#define INTC_IMRL_INT_MASK3		(0x00000008)
-#define INTC_IMRL_INT_MASK4		(0x00000010)
-#define INTC_IMRL_INT_MASK5		(0x00000020)
-#define INTC_IMRL_INT_MASK6		(0x00000040)
-#define INTC_IMRL_INT_MASK7		(0x00000080)
-#define INTC_IMRL_INT_MASK8		(0x00000100)
-#define INTC_IMRL_INT_MASK9		(0x00000200)
-#define INTC_IMRL_INT_MASK10		(0x00000400)
-#define INTC_IMRL_INT_MASK11		(0x00000800)
-#define INTC_IMRL_INT_MASK12		(0x00001000)
-#define INTC_IMRL_INT_MASK13		(0x00002000)
-#define INTC_IMRL_INT_MASK14		(0x00004000)
-#define INTC_IMRL_INT_MASK15		(0x00008000)
-#define INTC_IMRL_INT_MASK16		(0x00010000)
-#define INTC_IMRL_INT_MASK17		(0x00020000)
-#define INTC_IMRL_INT_MASK18		(0x00040000)
-#define INTC_IMRL_INT_MASK19		(0x00080000)
-#define INTC_IMRL_INT_MASK20		(0x00100000)
-#define INTC_IMRL_INT_MASK21		(0x00200000)
-#define INTC_IMRL_INT_MASK22		(0x00400000)
-#define INTC_IMRL_INT_MASK23		(0x00800000)
-#define INTC_IMRL_INT_MASK24		(0x01000000)
-#define INTC_IMRL_INT_MASK25		(0x02000000)
-#define INTC_IMRL_INT_MASK26		(0x04000000)
-#define INTC_IMRL_INT_MASK27		(0x08000000)
-#define INTC_IMRL_INT_MASK28		(0x10000000)
-#define INTC_IMRL_INT_MASK29		(0x20000000)
-#define INTC_IMRL_INT_MASK30		(0x40000000)
-#define INTC_IMRL_INT_MASK31		(0x80000000)
-
-/* Bit definitions and macros for INTFRCH */
-#define INTC_INTFRCH_INTFRC32		(0x00000001)
-#define INTC_INTFRCH_INTFRC33		(0x00000002)
-#define INTC_INTFRCH_INTFRC34		(0x00000004)
-#define INTC_INTFRCH_INTFRC35		(0x00000008)
-#define INTC_INTFRCH_INTFRC36		(0x00000010)
-#define INTC_INTFRCH_INTFRC37		(0x00000020)
-#define INTC_INTFRCH_INTFRC38		(0x00000040)
-#define INTC_INTFRCH_INTFRC39		(0x00000080)
-#define INTC_INTFRCH_INTFRC40		(0x00000100)
-#define INTC_INTFRCH_INTFRC41		(0x00000200)
-#define INTC_INTFRCH_INTFRC42		(0x00000400)
-#define INTC_INTFRCH_INTFRC43		(0x00000800)
-#define INTC_INTFRCH_INTFRC44		(0x00001000)
-#define INTC_INTFRCH_INTFRC45		(0x00002000)
-#define INTC_INTFRCH_INTFRC46		(0x00004000)
-#define INTC_INTFRCH_INTFRC47		(0x00008000)
-#define INTC_INTFRCH_INTFRC48		(0x00010000)
-#define INTC_INTFRCH_INTFRC49		(0x00020000)
-#define INTC_INTFRCH_INTFRC50		(0x00040000)
-#define INTC_INTFRCH_INTFRC51		(0x00080000)
-#define INTC_INTFRCH_INTFRC52		(0x00100000)
-#define INTC_INTFRCH_INTFRC53		(0x00200000)
-#define INTC_INTFRCH_INTFRC54		(0x00400000)
-#define INTC_INTFRCH_INTFRC55		(0x00800000)
-#define INTC_INTFRCH_INTFRC56		(0x01000000)
-#define INTC_INTFRCH_INTFRC57		(0x02000000)
-#define INTC_INTFRCH_INTFRC58		(0x04000000)
-#define INTC_INTFRCH_INTFRC59		(0x08000000)
-#define INTC_INTFRCH_INTFRC60		(0x10000000)
-#define INTC_INTFRCH_INTFRC61		(0x20000000)
-#define INTC_INTFRCH_INTFRC62		(0x40000000)
-#define INTC_INTFRCH_INTFRC63		(0x80000000)
-
-/* Bit definitions and macros for INTFRCL */
-#define INTC_INTFRCL_INTFRC0		(0x00000001)
-#define INTC_INTFRCL_INTFRC1		(0x00000002)
-#define INTC_INTFRCL_INTFRC2		(0x00000004)
-#define INTC_INTFRCL_INTFRC3		(0x00000008)
-#define INTC_INTFRCL_INTFRC4		(0x00000010)
-#define INTC_INTFRCL_INTFRC5		(0x00000020)
-#define INTC_INTFRCL_INTFRC6		(0x00000040)
-#define INTC_INTFRCL_INTFRC7		(0x00000080)
-#define INTC_INTFRCL_INTFRC8		(0x00000100)
-#define INTC_INTFRCL_INTFRC9		(0x00000200)
-#define INTC_INTFRCL_INTFRC10		(0x00000400)
-#define INTC_INTFRCL_INTFRC11		(0x00000800)
-#define INTC_INTFRCL_INTFRC12		(0x00001000)
-#define INTC_INTFRCL_INTFRC13		(0x00002000)
-#define INTC_INTFRCL_INTFRC14		(0x00004000)
-#define INTC_INTFRCL_INTFRC15		(0x00008000)
-#define INTC_INTFRCL_INTFRC16		(0x00010000)
-#define INTC_INTFRCL_INTFRC17		(0x00020000)
-#define INTC_INTFRCL_INTFRC18		(0x00040000)
-#define INTC_INTFRCL_INTFRC19		(0x00080000)
-#define INTC_INTFRCL_INTFRC20		(0x00100000)
-#define INTC_INTFRCL_INTFRC21		(0x00200000)
-#define INTC_INTFRCL_INTFRC22		(0x00400000)
-#define INTC_INTFRCL_INTFRC23		(0x00800000)
-#define INTC_INTFRCL_INTFRC24		(0x01000000)
-#define INTC_INTFRCL_INTFRC25		(0x02000000)
-#define INTC_INTFRCL_INTFRC26		(0x04000000)
-#define INTC_INTFRCL_INTFRC27		(0x08000000)
-#define INTC_INTFRCL_INTFRC28		(0x10000000)
-#define INTC_INTFRCL_INTFRC29		(0x20000000)
-#define INTC_INTFRCL_INTFRC30		(0x40000000)
-#define INTC_INTFRCL_INTFRC31		(0x80000000)
-
-/* Bit definitions and macros for ICONFIG */
-#define INTC_ICONFIG_EMASK		(0x0020)
-#define INTC_ICONFIG_ELVLPRI1		(0x0200)
-#define INTC_ICONFIG_ELVLPRI2		(0x0400)
-#define INTC_ICONFIG_ELVLPRI3		(0x0800)
-#define INTC_ICONFIG_ELVLPRI4		(0x1000)
-#define INTC_ICONFIG_ELVLPRI5		(0x2000)
-#define INTC_ICONFIG_ELVLPRI6		(0x4000)
-#define INTC_ICONFIG_ELVLPRI7		(0x8000)
-
-/* Bit definitions and macros for SIMR */
-#define INTC_SIMR_SIMR(x)		(((x)&0x7F))
-
-/* Bit definitions and macros for CIMR */
-#define INTC_CIMR_CIMR(x)		(((x)&0x7F))
-
-/* Bit definitions and macros for CLMASK */
-#define INTC_CLMASK_CLMASK(x)		(((x)&0x0F))
-
-/* Bit definitions and macros for SLMASK */
-#define INTC_SLMASK_SLMASK(x)		(((x)&0x0F))
-
-/* Bit definitions and macros for ICR group */
-#define INTC_ICR_IL(x)			(((x)&0x07))
-
-/*********************************************************************
-* Edge Port Module (EPORT)
-*********************************************************************/
-
-/* Bit definitions and macros for EPPAR */
-#define EPORT_EPPAR_EPPA1(x)		(((x)&0x0003)<<2)
-#define EPORT_EPPAR_EPPA2(x)		(((x)&0x0003)<<4)
-#define EPORT_EPPAR_EPPA3(x)		(((x)&0x0003)<<6)
-#define EPORT_EPPAR_EPPA4(x)		(((x)&0x0003)<<8)
-#define EPORT_EPPAR_EPPA5(x)		(((x)&0x0003)<<10)
-#define EPORT_EPPAR_EPPA6(x)		(((x)&0x0003)<<12)
-#define EPORT_EPPAR_EPPA7(x)		(((x)&0x0003)<<14)
-#define EPORT_EPPAR_LEVEL		(0)
-#define EPORT_EPPAR_RISING		(1)
-#define EPORT_EPPAR_FALLING		(2)
-#define EPORT_EPPAR_BOTH		(3)
-#define EPORT_EPPAR_EPPA7_LEVEL		(0x0000)
-#define EPORT_EPPAR_EPPA7_RISING	(0x4000)
-#define EPORT_EPPAR_EPPA7_FALLING	(0x8000)
-#define EPORT_EPPAR_EPPA7_BOTH		(0xC000)
-#define EPORT_EPPAR_EPPA6_LEVEL		(0x0000)
-#define EPORT_EPPAR_EPPA6_RISING	(0x1000)
-#define EPORT_EPPAR_EPPA6_FALLING	(0x2000)
-#define EPORT_EPPAR_EPPA6_BOTH		(0x3000)
-#define EPORT_EPPAR_EPPA5_LEVEL		(0x0000)
-#define EPORT_EPPAR_EPPA5_RISING	(0x0400)
-#define EPORT_EPPAR_EPPA5_FALLING	(0x0800)
-#define EPORT_EPPAR_EPPA5_BOTH		(0x0C00)
-#define EPORT_EPPAR_EPPA4_LEVEL		(0x0000)
-#define EPORT_EPPAR_EPPA4_RISING	(0x0100)
-#define EPORT_EPPAR_EPPA4_FALLING	(0x0200)
-#define EPORT_EPPAR_EPPA4_BOTH		(0x0300)
-#define EPORT_EPPAR_EPPA3_LEVEL		(0x0000)
-#define EPORT_EPPAR_EPPA3_RISING	(0x0040)
-#define EPORT_EPPAR_EPPA3_FALLING	(0x0080)
-#define EPORT_EPPAR_EPPA3_BOTH		(0x00C0)
-#define EPORT_EPPAR_EPPA2_LEVEL		(0x0000)
-#define EPORT_EPPAR_EPPA2_RISING	(0x0010)
-#define EPORT_EPPAR_EPPA2_FALLING	(0x0020)
-#define EPORT_EPPAR_EPPA2_BOTH		(0x0030)
-#define EPORT_EPPAR_EPPA1_LEVEL		(0x0000)
-#define EPORT_EPPAR_EPPA1_RISING	(0x0004)
-#define EPORT_EPPAR_EPPA1_FALLING	(0x0008)
-#define EPORT_EPPAR_EPPA1_BOTH		(0x000C)
-
-/* Bit definitions and macros for EPDDR */
-#define EPORT_EPDDR_EPDD1		(0x02)
-#define EPORT_EPDDR_EPDD2		(0x04)
-#define EPORT_EPDDR_EPDD3		(0x08)
-#define EPORT_EPDDR_EPDD4		(0x10)
-#define EPORT_EPDDR_EPDD5		(0x20)
-#define EPORT_EPDDR_EPDD6		(0x40)
-#define EPORT_EPDDR_EPDD7		(0x80)
-
-/* Bit definitions and macros for EPIER */
-#define EPORT_EPIER_EPIE1		(0x02)
-#define EPORT_EPIER_EPIE2		(0x04)
-#define EPORT_EPIER_EPIE3		(0x08)
-#define EPORT_EPIER_EPIE4		(0x10)
-#define EPORT_EPIER_EPIE5		(0x20)
-#define EPORT_EPIER_EPIE6		(0x40)
-#define EPORT_EPIER_EPIE7		(0x80)
-
-/* Bit definitions and macros for EPDR */
-#define EPORT_EPDR_EPD1			(0x02)
-#define EPORT_EPDR_EPD2			(0x04)
-#define EPORT_EPDR_EPD3			(0x08)
-#define EPORT_EPDR_EPD4			(0x10)
-#define EPORT_EPDR_EPD5			(0x20)
-#define EPORT_EPDR_EPD6			(0x40)
-#define EPORT_EPDR_EPD7			(0x80)
-
-/* Bit definitions and macros for EPPDR */
-#define EPORT_EPPDR_EPPD1		(0x02)
-#define EPORT_EPPDR_EPPD2		(0x04)
-#define EPORT_EPPDR_EPPD3		(0x08)
-#define EPORT_EPPDR_EPPD4		(0x10)
-#define EPORT_EPPDR_EPPD5		(0x20)
-#define EPORT_EPPDR_EPPD6		(0x40)
-#define EPORT_EPPDR_EPPD7		(0x80)
-
-/* Bit definitions and macros for EPFR */
-#define EPORT_EPFR_EPF1			(0x02)
-#define EPORT_EPFR_EPF2			(0x04)
-#define EPORT_EPFR_EPF3			(0x08)
-#define EPORT_EPFR_EPF4			(0x10)
-#define EPORT_EPFR_EPF5			(0x20)
-#define EPORT_EPFR_EPF6			(0x40)
-#define EPORT_EPFR_EPF7			(0x80)
-
 /*********************************************************************
 * Watchdog Timer Modules (WTM)
 *********************************************************************/
@@ -1040,24 +721,6 @@
 #define GPIO_DSCR_ATA_ATA_LOAD_10PF	(0x00)
 
 /*********************************************************************
-* Random Number Generator (RNG)
-*********************************************************************/
-
-/* Bit definitions and macros for RNGCR */
-#define RNG_RNGCR_GO			(0x00000001)
-#define RNG_RNGCR_HA			(0x00000002)
-#define RNG_RNGCR_IM			(0x00000004)
-#define RNG_RNGCR_CI			(0x00000008)
-
-/* Bit definitions and macros for RNGSR */
-#define RNG_RNGSR_SV			(0x00000001)
-#define RNG_RNGSR_LRS			(0x00000002)
-#define RNG_RNGSR_FUF			(0x00000004)
-#define RNG_RNGSR_EI			(0x00000008)
-#define RNG_RNGSR_OFL(x)		(((x)&0x000000FF)<<8)
-#define RNG_RNGSR_OFS(x)		(((x)&0x000000FF)<<16)
-
-/*********************************************************************
 * SDRAM Controller (SDRAMC)
 *********************************************************************/
 
diff --git a/include/asm-m68k/m547x_8x.h b/include/asm-m68k/m547x_8x.h
index 2db8df26f..23cee8e5e 100644
--- a/include/asm-m68k/m547x_8x.h
+++ b/include/asm-m68k/m547x_8x.h
@@ -305,74 +305,6 @@
 #define INT0_HI_GPT1			(61)
 #define INT0_HI_GPT0			(62)
 
-/* Bit definitions and macros for IPRH */
-#define INTC_IPRH_INT32			(0x00000001)
-#define INTC_IPRH_INT33			(0x00000002)
-#define INTC_IPRH_INT34			(0x00000004)
-#define INTC_IPRH_INT35			(0x00000008)
-#define INTC_IPRH_INT36			(0x00000010)
-#define INTC_IPRH_INT37			(0x00000020)
-#define INTC_IPRH_INT38			(0x00000040)
-#define INTC_IPRH_INT39			(0x00000080)
-#define INTC_IPRH_INT40			(0x00000100)
-#define INTC_IPRH_INT41			(0x00000200)
-#define INTC_IPRH_INT42			(0x00000400)
-#define INTC_IPRH_INT43			(0x00000800)
-#define INTC_IPRH_INT44			(0x00001000)
-#define INTC_IPRH_INT45			(0x00002000)
-#define INTC_IPRH_INT46			(0x00004000)
-#define INTC_IPRH_INT47			(0x00008000)
-#define INTC_IPRH_INT48			(0x00010000)
-#define INTC_IPRH_INT49			(0x00020000)
-#define INTC_IPRH_INT50			(0x00040000)
-#define INTC_IPRH_INT51			(0x00080000)
-#define INTC_IPRH_INT52			(0x00100000)
-#define INTC_IPRH_INT53			(0x00200000)
-#define INTC_IPRH_INT54			(0x00400000)
-#define INTC_IPRH_INT55			(0x00800000)
-#define INTC_IPRH_INT56			(0x01000000)
-#define INTC_IPRH_INT57			(0x02000000)
-#define INTC_IPRH_INT58			(0x04000000)
-#define INTC_IPRH_INT59			(0x08000000)
-#define INTC_IPRH_INT60			(0x10000000)
-#define INTC_IPRH_INT61			(0x20000000)
-#define INTC_IPRH_INT62			(0x40000000)
-#define INTC_IPRH_INT63			(0x80000000)
-
-/* Bit definitions and macros for IPRL */
-#define INTC_IPRL_INT0			(0x00000001)
-#define INTC_IPRL_INT1			(0x00000002)
-#define INTC_IPRL_INT2			(0x00000004)
-#define INTC_IPRL_INT3			(0x00000008)
-#define INTC_IPRL_INT4			(0x00000010)
-#define INTC_IPRL_INT5			(0x00000020)
-#define INTC_IPRL_INT6			(0x00000040)
-#define INTC_IPRL_INT7			(0x00000080)
-#define INTC_IPRL_INT8			(0x00000100)
-#define INTC_IPRL_INT9			(0x00000200)
-#define INTC_IPRL_INT10			(0x00000400)
-#define INTC_IPRL_INT11			(0x00000800)
-#define INTC_IPRL_INT12			(0x00001000)
-#define INTC_IPRL_INT13			(0x00002000)
-#define INTC_IPRL_INT14			(0x00004000)
-#define INTC_IPRL_INT15			(0x00008000)
-#define INTC_IPRL_INT16			(0x00010000)
-#define INTC_IPRL_INT17			(0x00020000)
-#define INTC_IPRL_INT18			(0x00040000)
-#define INTC_IPRL_INT19			(0x00080000)
-#define INTC_IPRL_INT20			(0x00100000)
-#define INTC_IPRL_INT21			(0x00200000)
-#define INTC_IPRL_INT22			(0x00400000)
-#define INTC_IPRL_INT23			(0x00800000)
-#define INTC_IPRL_INT24			(0x01000000)
-#define INTC_IPRL_INT25			(0x02000000)
-#define INTC_IPRL_INT26			(0x04000000)
-#define INTC_IPRL_INT27			(0x08000000)
-#define INTC_IPRL_INT28			(0x10000000)
-#define INTC_IPRL_INT29			(0x20000000)
-#define INTC_IPRL_INT30			(0x40000000)
-#define INTC_IPRL_INT31			(0x80000000)
-
 /*********************************************************************
 * General Purpose Timers (GPTMR)
 *********************************************************************/
diff --git a/include/asm-microblaze/global_data.h b/include/asm-microblaze/global_data.h
index 376786fca..3f49c349c 100644
--- a/include/asm-microblaze/global_data.h
+++ b/include/asm-microblaze/global_data.h
@@ -31,7 +31,7 @@
  * global variables during system initialization (until we have set
  * up the memory controller so that we can use RAM).
  *
- * Keep it *SMALL* and remember to set CFG_GBL_DATA_SIZE > sizeof(gd_t)
+ * Keep it *SMALL* and remember to set CONFIG_SYS_GBL_DATA_SIZE > sizeof(gd_t)
  */
 
 typedef	struct	global_data {
@@ -55,6 +55,7 @@ typedef	struct	global_data {
 #define	GD_FLG_POSTFAIL	0x00008		/* Critical POST test failed		*/
 #define	GD_FLG_POSTSTOP	0x00010		/* POST seqeunce aborted		*/
 #define	GD_FLG_LOGINIT	0x00020		/* Log Buffer has been initialized	*/
+#define GD_FLG_DISABLE_CONSOLE	0x00040		/* Disable console (in & out)	 */
 
 #define DECLARE_GLOBAL_DATA_PTR     register volatile gd_t *gd asm ("r31")
 
diff --git a/include/asm-microblaze/io.h b/include/asm-microblaze/io.h
index 8804724bf..7e190d15c 100644
--- a/include/asm-microblaze/io.h
+++ b/include/asm-microblaze/io.h
@@ -155,4 +155,9 @@ static inline void unmap_physmem(void *vaddr, unsigned long flags)
 
 }
 
+static inline phys_addr_t virt_to_phys(void * vaddr)
+{
+	return (phys_addr_t)(vaddr);
+}
+
 #endif /* __MICROBLAZE_IO_H__ */
diff --git a/include/asm-mips/global_data.h b/include/asm-mips/global_data.h
index ecee6dea6..b2c489115 100644
--- a/include/asm-mips/global_data.h
+++ b/include/asm-mips/global_data.h
@@ -33,7 +33,7 @@
  * global variables during system initialization (until we have set
  * up the memory controller so that we can use RAM).
  *
- * Keep it *SMALL* and remember to set CFG_GBL_DATA_SIZE > sizeof(gd_t)
+ * Keep it *SMALL* and remember to set CONFIG_SYS_GBL_DATA_SIZE > sizeof(gd_t)
  */
 
 typedef	struct	global_data {
@@ -57,6 +57,7 @@ typedef	struct	global_data {
 #define	GD_FLG_POSTFAIL	0x00008		/* Critical POST test failed	 */
 #define	GD_FLG_POSTSTOP	0x00010		/* POST seqeunce aborted	 */
 #define	GD_FLG_LOGINIT	0x00020		/* Log Buf has been initialized	 */
+#define GD_FLG_DISABLE_CONSOLE	0x00040		/* Disable console (in & out)	 */
 
 #define DECLARE_GLOBAL_DATA_PTR     register volatile gd_t *gd asm ("k0")
 
diff --git a/include/asm-mips/io.h b/include/asm-mips/io.h
index 3a0f33f20..031186d03 100644
--- a/include/asm-mips/io.h
+++ b/include/asm-mips/io.h
@@ -118,7 +118,7 @@ static inline void set_io_port_base(unsigned long base)
  * Change virtual addresses to physical addresses and vv.
  * These are trivial on the 1:1 Linux/MIPS mapping
  */
-extern inline unsigned long virt_to_phys(volatile void * address)
+extern inline phys_addr_t virt_to_phys(void * address)
 {
 	return CPHYSADDR(address);
 }
diff --git a/include/asm-nios/global_data.h b/include/asm-nios/global_data.h
index a56f939df..4929a5b87 100644
--- a/include/asm-nios/global_data.h
+++ b/include/asm-nios/global_data.h
@@ -48,6 +48,7 @@ typedef	struct	global_data {
 #define	GD_FLG_POSTFAIL	0x00008		/* Critical POST test failed		*/
 #define	GD_FLG_POSTSTOP	0x00010		/* POST seqeunce aborted		*/
 #define	GD_FLG_LOGINIT	0x00020		/* Log Buffer has been initialized	*/
+#define GD_FLG_DISABLE_CONSOLE	0x00040		/* Disable console (in & out)	 */
 
 #define DECLARE_GLOBAL_DATA_PTR     register gd_t *gd asm ("%g7")
 
diff --git a/include/asm-nios/io.h b/include/asm-nios/io.h
index 8b788068b..899682cc4 100644
--- a/include/asm-nios/io.h
+++ b/include/asm-nios/io.h
@@ -133,4 +133,9 @@ static inline void unmap_physmem(void *vaddr, unsigned long flags)
 
 }
 
+static inline phys_addr_t virt_to_phys(void * vaddr)
+{
+	return (phys_addr_t)(vaddr);
+}
+
 #endif /* __ASM_NIOS_IO_H_ */
diff --git a/include/asm-nios2/global_data.h b/include/asm-nios2/global_data.h
index cd17e0894..db71324d4 100644
--- a/include/asm-nios2/global_data.h
+++ b/include/asm-nios2/global_data.h
@@ -47,6 +47,7 @@ typedef	struct	global_data {
 #define	GD_FLG_POSTFAIL	0x00008		/* Critical POST test failed		*/
 #define	GD_FLG_POSTSTOP	0x00010		/* POST seqeunce aborted		*/
 #define	GD_FLG_LOGINIT	0x00020		/* Log Buffer has been initialized	*/
+#define GD_FLG_DISABLE_CONSOLE	0x00040		/* Disable console (in & out)	 */
 
 #define DECLARE_GLOBAL_DATA_PTR     register gd_t *gd asm ("r15")
 
diff --git a/include/asm-nios2/io.h b/include/asm-nios2/io.h
index 2f1ec26bd..01d11efec 100644
--- a/include/asm-nios2/io.h
+++ b/include/asm-nios2/io.h
@@ -53,6 +53,11 @@ static inline void unmap_physmem(void *vaddr, unsigned long flags)
 
 }
 
+static inline phys_addr_t virt_to_phys(void * vaddr)
+{
+	return (phys_addr_t)(vaddr);
+}
+
 extern unsigned char inb (unsigned char *port);
 extern unsigned short inw (unsigned short *port);
 extern unsigned inl (unsigned port);
diff --git a/include/asm-ppc/4xx_pcie.h b/include/asm-ppc/4xx_pcie.h
index a7cf1e8f5..a0e88de11 100644
--- a/include/asm-ppc/4xx_pcie.h
+++ b/include/asm-ppc/4xx_pcie.h
@@ -18,9 +18,9 @@
 #define DCRN_SDR0_CFGDATA	0x00f
 
 #if defined(CONFIG_440SPE)
-#define CFG_PCIE_NR_PORTS	3
+#define CONFIG_SYS_PCIE_NR_PORTS	3
 
-#define CFG_PCIE_ADDR_HIGH	0x0000000d
+#define CONFIG_SYS_PCIE_ADDR_HIGH	0x0000000d
 
 #define DCRN_PCIE0_BASE		0x100
 #define DCRN_PCIE1_BASE		0x120
@@ -32,9 +32,9 @@
 #endif
 
 #if defined(CONFIG_460EX) || defined(CONFIG_460GT)
-#define CFG_PCIE_NR_PORTS	2
+#define CONFIG_SYS_PCIE_NR_PORTS	2
 
-#define CFG_PCIE_ADDR_HIGH	0x0000000d
+#define CONFIG_SYS_PCIE_ADDR_HIGH	0x0000000d
 
 #define DCRN_PCIE0_BASE		0x100
 #define DCRN_PCIE1_BASE		0x120
@@ -44,9 +44,9 @@
 #endif
 
 #if defined(CONFIG_405EX)
-#define CFG_PCIE_NR_PORTS	2
+#define CONFIG_SYS_PCIE_NR_PORTS	2
 
-#define CFG_PCIE_ADDR_HIGH	0x00000000
+#define CONFIG_SYS_PCIE_ADDR_HIGH	0x00000000
 
 #define	DCRN_PCIE0_BASE		0x040
 #define	DCRN_PCIE1_BASE		0x060
@@ -406,7 +406,7 @@ static inline u32 sdr_base(int port)
 		return PCIE0_SDR;
 	case 1:
 		return PCIE1_SDR;
-#if CFG_PCIE_NR_PORTS > 2
+#if CONFIG_SYS_PCIE_NR_PORTS > 2
 	case 2:
 		return PCIE2_SDR;
 #endif
diff --git a/include/asm-ppc/cache.h b/include/asm-ppc/cache.h
index 9d9b9717d..53e8d05f5 100644
--- a/include/asm-ppc/cache.h
+++ b/include/asm-ppc/cache.h
@@ -12,6 +12,8 @@
 #define	L1_CACHE_SHIFT	4
 #elif defined(CONFIG_PPC64BRIDGE)
 #define L1_CACHE_SHIFT	7
+#elif defined(CONFIG_E500MC)
+#define L1_CACHE_SHIFT	6
 #else
 #define	L1_CACHE_SHIFT	5
 #endif
@@ -19,10 +21,10 @@
 #define L1_CACHE_BYTES          (1 << L1_CACHE_SHIFT)
 
 /*
- * For compatibility reasons support the CFG_CACHELINE_SIZE too
+ * For compatibility reasons support the CONFIG_SYS_CACHELINE_SIZE too
  */
-#ifndef CFG_CACHELINE_SIZE
-#define CFG_CACHELINE_SIZE	L1_CACHE_BYTES
+#ifndef CONFIG_SYS_CACHELINE_SIZE
+#define CONFIG_SYS_CACHELINE_SIZE	L1_CACHE_BYTES
 #endif
 
 #define	L1_CACHE_ALIGN(x)       (((x)+(L1_CACHE_BYTES-1))&~(L1_CACHE_BYTES-1))
@@ -44,9 +46,10 @@ extern void clean_dcache_range(unsigned long start, unsigned long stop);
 extern void invalidate_dcache_range(unsigned long start, unsigned long stop);
 extern void flush_dcache(void);
 extern void invalidate_dcache(void);
-#ifdef CFG_INIT_RAM_LOCK
+extern void invalidate_icache(void);
+#ifdef CONFIG_SYS_INIT_RAM_LOCK
 extern void unlock_ram_in_cache(void);
-#endif /* CFG_INIT_RAM_LOCK */
+#endif /* CONFIG_SYS_INIT_RAM_LOCK */
 #endif /* __ASSEMBLY__ */
 
 /* prep registers for L2 */
diff --git a/include/asm-ppc/cpm_8260.h b/include/asm-ppc/cpm_8260.h
index 2a9774ade..7e06940c9 100644
--- a/include/asm-ppc/cpm_8260.h
+++ b/include/asm-ppc/cpm_8260.h
@@ -141,16 +141,16 @@ typedef struct cpm_buf_desc {
 
 /* Parameter RAM offsets from the base.
 */
-#ifndef CFG_CPM_POST_WORD_ADDR
+#ifndef CONFIG_SYS_CPM_POST_WORD_ADDR
 #define CPM_POST_WORD_ADDR      0x80FC	/* steal a long at the end of SCC1 */
 #else
-#define CPM_POST_WORD_ADDR	CFG_CPM_POST_WORD_ADDR
+#define CPM_POST_WORD_ADDR	CONFIG_SYS_CPM_POST_WORD_ADDR
 #endif
 
-#ifndef CFG_CPM_BOOTCOUNT_ADDR
+#ifndef CONFIG_SYS_CPM_BOOTCOUNT_ADDR
 #define CPM_BOOTCOUNT_ADDR	(CPM_POST_WORD_ADDR - 2*sizeof(ulong))
 #else
-#define CPM_BOOTCOUNT_ADDR	CFG_CPM_BOOTCOUNT_ADDR
+#define CPM_BOOTCOUNT_ADDR	CONFIG_SYS_CPM_BOOTCOUNT_ADDR
 #endif
 
 #define PROFF_SCC1		((uint)0x8000)
diff --git a/cpu/mpc8xxx/ddr/ddr1_2_dimm_params.h b/include/asm-ppc/fsl_ddr_dimm_params.h
index c794eedfe..c794eedfe 100644
--- a/cpu/mpc8xxx/ddr/ddr1_2_dimm_params.h
+++ b/include/asm-ppc/fsl_ddr_dimm_params.h
diff --git a/include/asm-ppc/fsl_ddr_sdram.h b/include/asm-ppc/fsl_ddr_sdram.h
index 8adde3424..c1ea7cd6b 100644
--- a/include/asm-ppc/fsl_ddr_sdram.h
+++ b/include/asm-ppc/fsl_ddr_sdram.h
@@ -36,6 +36,18 @@ typedef ddr2_spd_eeprom_t generic_spd_eeprom_t;
 typedef ddr3_spd_eeprom_t generic_spd_eeprom_t;
 #endif
 
+/* define bank(chip select) interleaving mode */
+#define FSL_DDR_CS0_CS1			0x40
+#define FSL_DDR_CS2_CS3			0x20
+#define FSL_DDR_CS0_CS1_AND_CS2_CS3	(FSL_DDR_CS0_CS1 | FSL_DDR_CS2_CS3)
+#define FSL_DDR_CS0_CS1_CS2_CS3		(FSL_DDR_CS0_CS1_AND_CS2_CS3 | 0x04)
+
+/* define memory controller interleaving mode */
+#define FSL_DDR_CACHE_LINE_INTERLEAVING	0x0
+#define FSL_DDR_PAGE_INTERLEAVING	0x1
+#define FSL_DDR_BANK_INTERLEAVING	0x2
+#define FSL_DDR_SUPERBANK_INTERLEAVING	0x3
+
 /* Record of register values computed */
 typedef struct fsl_ddr_cfg_regs_s {
 	struct {
diff --git a/include/asm-ppc/fsl_lbc.h b/include/asm-ppc/fsl_lbc.h
index ea49ddc51..51fc5c13b 100644
--- a/include/asm-ppc/fsl_lbc.h
+++ b/include/asm-ppc/fsl_lbc.h
@@ -69,6 +69,14 @@
 #define BR_RES				~(BR_BA | BR_PS | BR_DECC | BR_WP | BR_MSEL | BR_ATOM | BR_V)
 #endif
 
+/* Convert an address into the right format for the BR registers */
+#ifdef CONFIG_PHYS_64BIT
+#define BR_PHYS_ADDR(x)	((unsigned long)((x & 0x0ffff8000ULL) | \
+					 ((x & 0x300000000ULL) >> 19)))
+#else
+#define BR_PHYS_ADDR(x) (x & 0xffff8000)
+#endif
+
 /* OR - Option Registers
  */
 #define OR0				0x5004		/* Register offset to immr */
@@ -307,4 +315,134 @@
 #define LTEDR_RAWA	0x00400000 /* Read-after-write-atomic error checking disable	*/
 #define LTEDR_CSD	0x00080000 /* Chip select error checking disable		*/
 
+/* FMR - Flash Mode Register
+ */
+#define FMR_CWTO               0x0000F000
+#define FMR_CWTO_SHIFT         12
+#define FMR_BOOT               0x00000800
+#define FMR_ECCM               0x00000100
+#define FMR_AL                 0x00000030
+#define FMR_AL_SHIFT           4
+#define FMR_OP                 0x00000003
+#define FMR_OP_SHIFT           0
+
+/* FIR - Flash Instruction Register
+ */
+#define FIR_OP0                        0xF0000000
+#define FIR_OP0_SHIFT          28
+#define FIR_OP1                        0x0F000000
+#define FIR_OP1_SHIFT          24
+#define FIR_OP2                        0x00F00000
+#define FIR_OP2_SHIFT          20
+#define FIR_OP3                        0x000F0000
+#define FIR_OP3_SHIFT          16
+#define FIR_OP4                        0x0000F000
+#define FIR_OP4_SHIFT          12
+#define FIR_OP5                        0x00000F00
+#define FIR_OP5_SHIFT          8
+#define FIR_OP6                        0x000000F0
+#define FIR_OP6_SHIFT          4
+#define FIR_OP7                        0x0000000F
+#define FIR_OP7_SHIFT          0
+#define FIR_OP_NOP             0x0 /* No operation and end of sequence */
+#define FIR_OP_CA              0x1 /* Issue current column address */
+#define FIR_OP_PA              0x2 /* Issue current block+page address */
+#define FIR_OP_UA              0x3 /* Issue user defined address */
+#define FIR_OP_CM0             0x4 /* Issue command from FCR[CMD0] */
+#define FIR_OP_CM1             0x5 /* Issue command from FCR[CMD1] */
+#define FIR_OP_CM2             0x6 /* Issue command from FCR[CMD2] */
+#define FIR_OP_CM3             0x7 /* Issue command from FCR[CMD3] */
+#define FIR_OP_WB              0x8 /* Write FBCR bytes from FCM buffer */
+#define FIR_OP_WS              0x9 /* Write 1 or 2 bytes from MDR[AS] */
+#define FIR_OP_RB              0xA /* Read FBCR bytes to FCM buffer */
+#define FIR_OP_RS              0xB /* Read 1 or 2 bytes to MDR[AS] */
+#define FIR_OP_CW0             0xC /* Wait then issue FCR[CMD0] */
+#define FIR_OP_CW1             0xD /* Wait then issue FCR[CMD1] */
+#define FIR_OP_RBW             0xE /* Wait then read FBCR bytes */
+#define FIR_OP_RSW             0xF /* Wait then read 1 or 2 bytes */
+
+/* FCR - Flash Command Register
+ */
+#define FCR_CMD0               0xFF000000
+#define FCR_CMD0_SHIFT         24
+#define FCR_CMD1               0x00FF0000
+#define FCR_CMD1_SHIFT         16
+#define FCR_CMD2               0x0000FF00
+#define FCR_CMD2_SHIFT         8
+#define FCR_CMD3               0x000000FF
+#define FCR_CMD3_SHIFT         0
+/* FBAR - Flash Block Address Register
+ */
+#define FBAR_BLK               0x00FFFFFF
+
+/* FPAR - Flash Page Address Register
+ */
+#define FPAR_SP_PI             0x00007C00
+#define FPAR_SP_PI_SHIFT       10
+#define FPAR_SP_MS             0x00000200
+#define FPAR_SP_CI             0x000001FF
+#define FPAR_SP_CI_SHIFT       0
+#define FPAR_LP_PI             0x0003F000
+#define FPAR_LP_PI_SHIFT       12
+#define FPAR_LP_MS             0x00000800
+#define FPAR_LP_CI             0x000007FF
+#define FPAR_LP_CI_SHIFT       0
+
+/* LTESR - Transfer Error Status Register
+ */
+#define LTESR_BM               0x80000000
+#define LTESR_FCT              0x40000000
+#define LTESR_PAR              0x20000000
+#define LTESR_WP               0x04000000
+#define LTESR_ATMW             0x00800000
+#define LTESR_ATMR             0x00400000
+#define LTESR_CS               0x00080000
+#define LTESR_CC               0x00000001
+
+#ifndef __ASSEMBLY__
+/*
+ * Local Bus Controller Registers.
+ */
+typedef struct lbus_bank {
+	u32 br;                 /* Base Register */
+	u32 or;                 /* Option Register */
+} lbus_bank_t;
+
+typedef struct fsl_lbus {
+	lbus_bank_t bank[8];
+	u8 res0[0x28];
+	u32 mar;                /* UPM Address Register */
+	u8 res1[0x4];
+	u32 mamr;               /* UPMA Mode Register */
+	u32 mbmr;               /* UPMB Mode Register */
+	u32 mcmr;               /* UPMC Mode Register */
+	u8 res2[0x8];
+	u32 mrtpr;              /* Memory Refresh Timer Prescaler Register */
+	u32 mdr;                /* UPM Data Register */
+	u8 res3[0x4];
+	u32 lsor;               /* Special Operation Initiation Register */
+	u32 lsdmr;              /* SDRAM Mode Register */
+	u8 res4[0x8];
+	u32 lurt;               /* UPM Refresh Timer */
+	u32 lsrt;               /* SDRAM Refresh Timer */
+	u8 res5[0x8];
+	u32 ltesr;              /* Transfer Error Status Register */
+	u32 ltedr;              /* Transfer Error Disable Register */
+	u32 lteir;              /* Transfer Error Interrupt Register */
+	u32 lteatr;             /* Transfer Error Attributes Register */
+	u32 ltear;               /* Transfer Error Address Register */
+	u8 res6[0xC];
+	u32 lbcr;               /* Configuration Register */
+	u32 lcrr;               /* Clock Ratio Register */
+	u8 res7[0x8];
+	u32 fmr;                /* Flash Mode Register */
+	u32 fir;                /* Flash Instruction Register */
+	u32 fcr;                /* Flash Command Register */
+	u32 fbar;               /* Flash Block Addr Register */
+	u32 fpar;               /* Flash Page Addr Register */
+	u32 fbcr;               /* Flash Byte Count Register */
+	u8 res8[0xF08];
+} fsl_lbus_t;
+#endif /* __ASSEMBLY__ */
+
 #endif /* __ASM_PPC_FSL_LBC_H */
diff --git a/include/asm-ppc/fsl_serdes.h b/include/asm-ppc/fsl_serdes.h
index 733f919cf..6da4b6ff9 100644
--- a/include/asm-ppc/fsl_serdes.h
+++ b/include/asm-ppc/fsl_serdes.h
@@ -3,9 +3,9 @@
 
 #include <config.h>
 
-#define FSL_SERDES_CLK_100		0
-#define FSL_SERDES_CLK_125		1
-#define FSL_SERDES_CLK_150		3
+#define FSL_SERDES_CLK_100		(0 << 28)
+#define FSL_SERDES_CLK_125		(1 << 28)
+#define FSL_SERDES_CLK_150		(3 << 28)
 #define FSL_SERDES_PROTO_SATA		0
 #define FSL_SERDES_PROTO_PEX		1
 #define FSL_SERDES_PROTO_PEX_X2		2
@@ -13,9 +13,9 @@
 #define FSL_SERDES_VDD_1V		1
 
 #ifdef CONFIG_FSL_SERDES
-extern void fsl_setup_serdes(u32 offset, char proto, char rfcks, char vdd);
+extern void fsl_setup_serdes(u32 offset, char proto, u32 rfcks, char vdd);
 #else
-static void fsl_setup_serdes(u32 offset, char proto, char rfcks, char vdd) {}
+static void fsl_setup_serdes(u32 offset, char proto, u32 rfcks, char vdd) {}
 #endif /* CONFIG_FSL_SERDES */
 
 #endif /* __FSL_SERDES_H */
diff --git a/include/asm-ppc/global_data.h b/include/asm-ppc/global_data.h
index c09b07d36..aade097fa 100644
--- a/include/asm-ppc/global_data.h
+++ b/include/asm-ppc/global_data.h
@@ -33,7 +33,7 @@
  * global variables during system initialization (until we have set
  * up the memory controller so that we can use RAM).
  *
- * Keep it *SMALL* and remember to set CFG_GBL_DATA_SIZE > sizeof(gd_t)
+ * Keep it *SMALL* and remember to set CONFIG_SYS_GBL_DATA_SIZE > sizeof(gd_t)
  */
 
 typedef	struct	global_data {
@@ -122,17 +122,21 @@ typedef	struct	global_data {
 	phys_size_t	ram_size;	/* RAM size */
 	unsigned long	reloc_off;	/* Relocation Offset */
 	unsigned long	reset_status;	/* reset status register at boot	*/
+#if defined(CONFIG_MPC83XX)
+	unsigned long	arbiter_event_attributes;
+	unsigned long	arbiter_event_address;
+#endif
 	unsigned long	env_addr;	/* Address  of Environment struct	*/
 	unsigned long	env_valid;	/* Checksum of Environment valid?	*/
 	unsigned long	have_console;	/* serial_init() was called		*/
-#if defined(CFG_ALLOC_DPRAM) || defined(CONFIG_CPM2)
+#if defined(CONFIG_SYS_ALLOC_DPRAM) || defined(CONFIG_CPM2)
 	unsigned int	dp_alloc_base;
 	unsigned int	dp_alloc_top;
 #endif
 #if defined(CONFIG_4xx)
 	u32  uart_clk;
 #endif /* CONFIG_4xx */
-#if defined(CFG_GT_6426x)
+#if defined(CONFIG_SYS_GT_6426x)
 	unsigned int	mirror_hack[16];
 #endif
 #if defined(CONFIG_A3000)	|| \
@@ -176,6 +180,7 @@ typedef	struct	global_data {
 #define	GD_FLG_POSTFAIL	0x00008		/* Critical POST test failed		*/
 #define	GD_FLG_POSTSTOP	0x00010		/* POST seqeunce aborted		*/
 #define	GD_FLG_LOGINIT	0x00020		/* Log Buffer has been initialized	*/
+#define GD_FLG_DISABLE_CONSOLE	0x00040		/* Disable console (in & out)	 */
 
 #if 1
 #define DECLARE_GLOBAL_DATA_PTR     register volatile gd_t *gd asm ("r2")
diff --git a/include/asm-ppc/immap_83xx.h b/include/asm-ppc/immap_83xx.h
index ff183033c..df24a6e87 100644
--- a/include/asm-ppc/immap_83xx.h
+++ b/include/asm-ppc/immap_83xx.h
@@ -31,6 +31,7 @@
 #include <asm/types.h>
 #include <asm/fsl_i2c.h>
 #include <asm/mpc8xxx_spi.h>
+#include <asm/fsl_lbc.h>
 
 /*
  * Local Access Window
@@ -343,50 +344,6 @@ typedef struct duart83xx {
 } duart83xx_t;
 
 /*
- * Local Bus Controller Registers
- */
-typedef struct lbus_bank {
-	u32 br;			/* Base Register */
-	u32 or;			/* Option Register */
-} lbus_bank_t;
-
-typedef struct lbus83xx {
-	lbus_bank_t bank[8];
-	u8 res0[0x28];
-	u32 mar;		/* UPM Address Register */
-	u8 res1[0x4];
-	u32 mamr;		/* UPMA Mode Register */
-	u32 mbmr;		/* UPMB Mode Register */
-	u32 mcmr;		/* UPMC Mode Register */
-	u8 res2[0x8];
-	u32 mrtpr;		/* Memory Refresh Timer Prescaler Register */
-	u32 mdr;		/* UPM Data Register */
-	u8 res3[0x4];
-	u32 lsor;		/* Special Operation Initiation Register */
-	u32 lsdmr;		/* SDRAM Mode Register */
-	u8 res4[0x8];
-	u32 lurt;		/* UPM Refresh Timer */
-	u32 lsrt;		/* SDRAM Refresh Timer */
-	u8 res5[0x8];
-	u32 ltesr;		/* Transfer Error Status Register */
-	u32 ltedr;		/* Transfer Error Disable Register */
-	u32 lteir;		/* Transfer Error Interrupt Register */
-	u32 lteatr;		/* Transfer Error Attributes Register */
-	u32 ltear;		/* Transfer Error Address Register */
-	u8 res6[0xC];
-	u32 lbcr;		/* Configuration Register */
-	u32 lcrr;		/* Clock Ratio Register */
-	u8 res7[0x8];
-	u32 fmr;		/* Flash Mode Register */
-	u32 fir;		/* Flash Instruction Register */
-	u32 fcr;		/* Flash Command Register */
-	u32 fbar;		/* Flash Block Addr Register */
-	u32 fpar;		/* Flash Page Addr Register */
-	u32 fbcr;		/* Flash Byte Count Register */
-	u8 res8[0xF08];
-} lbus83xx_t;
-
-/*
  * DMA/Messaging Unit
  */
 typedef struct dma83xx {
@@ -614,7 +571,7 @@ typedef struct immap {
 	u8			res2[0x1300];
 	duart83xx_t		duart[2];	/* DUART */
 	u8			res3[0x900];
-	lbus83xx_t		lbus;		/* Local Bus Controller Registers */
+	fsl_lbus_t		lbus;	/* Local Bus Controller Registers */
 	u8			res4[0x1000];
 	spi8xxx_t		spi;		/* Serial Peripheral Interface */
 	dma83xx_t		dma;		/* DMA */
@@ -648,7 +605,7 @@ typedef struct immap {
 	u8			res1[0x1300];
 	duart83xx_t		duart[2];	/* DUART */
 	u8			res2[0x900];
-	lbus83xx_t		lbus;		/* Local Bus Controller Registers */
+	fsl_lbus_t		lbus;	/* Local Bus Controller Registers */
 	u8			res3[0x1000];
 	spi8xxx_t		spi;		/* Serial Peripheral Interface */
 	dma83xx_t		dma;		/* DMA */
@@ -683,7 +640,7 @@ typedef struct immap {
 	u8			res1[0x1300];
 	duart83xx_t		duart[2];	/* DUART */
 	u8			res2[0x900];
-	lbus83xx_t		lbus;		/* Local Bus Controller Registers */
+	fsl_lbus_t		lbus;	/* Local Bus Controller Registers */
 	u8			res3[0x1000];
 	spi8xxx_t		spi;		/* Serial Peripheral Interface */
 	dma83xx_t		dma;		/* DMA */
@@ -728,7 +685,7 @@ typedef struct immap {
 	u8			res1[0x1300];
 	duart83xx_t		duart[2];	/* DUART */
 	u8			res2[0x900];
-	lbus83xx_t		lbus;		/* Local Bus Controller Registers */
+	fsl_lbus_t		lbus;	/* Local Bus Controller Registers */
 	u8			res3[0x1000];
 	spi8xxx_t		spi;		/* Serial Peripheral Interface */
 	dma83xx_t		dma;		/* DMA */
@@ -778,7 +735,7 @@ typedef struct immap {
 	u8			res4[0x1300];
 	duart83xx_t		duart[2];	/* DUART */
 	u8			res5[0x900];
-	lbus83xx_t		lbus;		/* Local Bus Controller Registers */
+	fsl_lbus_t		lbus;	/* Local Bus Controller Registers */
 	u8			res6[0x2000];
 	dma83xx_t		dma;		/* DMA */
 	pciconf83xx_t		pci_conf[1];	/* PCI Software Configuration Registers */
@@ -817,7 +774,7 @@ typedef struct immap {
 	u8			res3[0x1300];
 	duart83xx_t		duart[2];	/* DUART */
 	u8			res4[0x900];
-	lbus83xx_t		lbus;		/* Local Bus Controller Registers */
+	fsl_lbus_t		lbus;	/* Local Bus Controller Registers */
 	u8			res5[0x2000];
 	dma83xx_t		dma;		/* DMA */
 	pciconf83xx_t		pci_conf[1];	/* PCI Software Configuration Registers */
diff --git a/include/asm-ppc/immap_85xx.h b/include/asm-ppc/immap_85xx.h
index 559d6ea6c..e5046bef3 100644
--- a/include/asm-ppc/immap_85xx.h
+++ b/include/asm-ppc/immap_85xx.h
@@ -13,6 +13,7 @@
 
 #include <asm/types.h>
 #include <asm/fsl_i2c.h>
+#include <asm/fsl_lbc.h>
 
 /*
  * Local-Access Registers and ECM Registers(0x0000-0x2000)
@@ -1552,6 +1553,13 @@ typedef struct par_io {
  */
 typedef struct ccsr_gur {
 	uint	porpllsr;	/* 0xe0000 - POR PLL ratio status register */
+#ifdef CONFIG_MPC8536
+#define MPC85xx_PORPLLSR_DDR_RATIO	0x3e000000
+#define MPC85xx_PORPLLSR_DDR_RATIO_SHIFT	25
+#else
+#define MPC85xx_PORPLLSR_DDR_RATIO	0x00003e00
+#define MPC85xx_PORPLLSR_DDR_RATIO_SHIFT	9
+#endif
 	uint	porbmsr;	/* 0xe0004 - POR boot mode status register */
 #define MPC85xx_PORBMSR_HA		0x00070000
 	uint	porimpscr;	/* 0xe0008 - POR I/O impedance status and control register */
@@ -1561,7 +1569,8 @@ typedef struct ccsr_gur {
 #define MPC85xx_PORDEVSR_SGMII3_DIS	0x08000000
 #define MPC85xx_PORDEVSR_SGMII4_DIS	0x04000000
 #define MPC85xx_PORDEVSR_SRDS2_IO_SEL   0x38000000
-#define MPC85xx_PORDEVSR_IO_SEL		0x00380000
+#define MPC85xx_PORDEVSR_PCI1		0x00800000
+#define MPC85xx_PORDEVSR_IO_SEL		0x00780000
 #define MPC85xx_PORDEVSR_PCI2_ARB	0x00040000
 #define MPC85xx_PORDEVSR_PCI1_ARB	0x00020000
 #define MPC85xx_PORDEVSR_PCI1_PCI32	0x00010000
@@ -1572,7 +1581,8 @@ typedef struct ccsr_gur {
 #define MPC85xx_PORDEVSR_RIO_DEV_ID	0x00000007
 	uint	pordbgmsr;	/* 0xe0010 - POR debug mode status register */
 	uint	pordevsr2;	/* 0xe0014 - POR I/O device status regsiter 2 */
-#define MPC85xx_PORDEVSR2_SEC_CFG	0x00000020
+/* The 8544 RM says this is bit 26, but it's really bit 24 */
+#define MPC85xx_PORDEVSR2_SEC_CFG	0x00000080
 	char	res1[8];
 	uint	gpporcr;	/* 0xe0020 - General-purpose POR configuration register */
 	char	res2[12];
@@ -1638,39 +1648,37 @@ typedef struct ccsr_gur {
 	char	res15[61648];	/* 0xe0f30 to 0xefffff */
 } ccsr_gur_t;
 
-#define PORDEVSR_PCI	(0x00800000)	/* PCI Mode */
-
-#define CFG_MPC85xx_GUTS_OFFSET	(0xE0000)
-#define CFG_MPC85xx_GUTS_ADDR	(CFG_IMMR + CFG_MPC85xx_GUTS_OFFSET)
-#define CFG_MPC85xx_ECM_OFFSET	(0x0000)
-#define CFG_MPC85xx_ECM_ADDR	(CFG_IMMR + CFG_MPC85xx_ECM_OFFSET)
-#define CFG_MPC85xx_DDR_OFFSET	(0x2000)
-#define CFG_MPC85xx_DDR_ADDR	(CFG_IMMR + CFG_MPC85xx_DDR_OFFSET)
-#define CFG_MPC85xx_DDR2_OFFSET	(0x6000)
-#define CFG_MPC85xx_DDR2_ADDR	(CFG_IMMR + CFG_MPC85xx_DDR2_OFFSET)
-#define CFG_MPC85xx_LBC_OFFSET	(0x5000)
-#define CFG_MPC85xx_LBC_ADDR	(CFG_IMMR + CFG_MPC85xx_LBC_OFFSET)
-#define CFG_MPC85xx_PCIX_OFFSET	(0x8000)
-#define CFG_MPC85xx_PCIX_ADDR	(CFG_IMMR + CFG_MPC85xx_PCIX_OFFSET)
-#define CFG_MPC85xx_PCIX2_OFFSET	(0x9000)
-#define CFG_MPC85xx_PCIX2_ADDR	(CFG_IMMR + CFG_MPC85xx_PCIX2_OFFSET)
-#define CFG_MPC85xx_SATA1_OFFSET	(0x18000)
-#define CFG_MPC85xx_SATA1_ADDR	(CFG_IMMR + CFG_MPC85xx_SATA1_OFFSET)
-#define CFG_MPC85xx_SATA2_OFFSET	(0x19000)
-#define CFG_MPC85xx_SATA2_ADDR	(CFG_IMMR + CFG_MPC85xx_SATA2_OFFSET)
-#define CFG_MPC85xx_L2_OFFSET	(0x20000)
-#define CFG_MPC85xx_L2_ADDR	(CFG_IMMR + CFG_MPC85xx_L2_OFFSET)
-#define CFG_MPC85xx_DMA_OFFSET	(0x21000)
-#define CFG_MPC85xx_DMA_ADDR	(CFG_IMMR + CFG_MPC85xx_DMA_OFFSET)
-#define CFG_MPC85xx_ESDHC_OFFSET	(0x2e000)
-#define CFG_MPC85xx_ESDHC_ADDR	(CFG_IMMR + CFG_MPC85xx_ESDHC_OFFSET)
-#define CFG_MPC85xx_PIC_OFFSET	(0x40000)
-#define CFG_MPC85xx_PIC_ADDR	(CFG_IMMR + CFG_MPC85xx_PIC_OFFSET)
-#define CFG_MPC85xx_CPM_OFFSET	(0x80000)
-#define CFG_MPC85xx_CPM_ADDR	(CFG_IMMR + CFG_MPC85xx_CPM_OFFSET)
-#define CFG_MPC85xx_SERDES1_OFFSET	(0xE3000)
-#define CFG_MPC85xx_SERDES1_ADDR	(CFG_IMMR + CFG_MPC85xx_SERDES2_OFFSET)
-#define CFG_MPC85xx_SERDES2_OFFSET	(0xE3100)
-#define CFG_MPC85xx_SERDES2_ADDR	(CFG_IMMR + CFG_MPC85xx_SERDES2_OFFSET)
+#define CONFIG_SYS_MPC85xx_GUTS_OFFSET	(0xE0000)
+#define CONFIG_SYS_MPC85xx_GUTS_ADDR	(CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_GUTS_OFFSET)
+#define CONFIG_SYS_MPC85xx_ECM_OFFSET	(0x0000)
+#define CONFIG_SYS_MPC85xx_ECM_ADDR	(CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_ECM_OFFSET)
+#define CONFIG_SYS_MPC85xx_DDR_OFFSET	(0x2000)
+#define CONFIG_SYS_MPC85xx_DDR_ADDR	(CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_DDR_OFFSET)
+#define CONFIG_SYS_MPC85xx_DDR2_OFFSET	(0x6000)
+#define CONFIG_SYS_MPC85xx_DDR2_ADDR	(CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_DDR2_OFFSET)
+#define CONFIG_SYS_MPC85xx_LBC_OFFSET	(0x5000)
+#define CONFIG_SYS_MPC85xx_LBC_ADDR	(CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_LBC_OFFSET)
+#define CONFIG_SYS_MPC85xx_PCIX_OFFSET	(0x8000)
+#define CONFIG_SYS_MPC85xx_PCIX_ADDR	(CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_PCIX_OFFSET)
+#define CONFIG_SYS_MPC85xx_PCIX2_OFFSET	(0x9000)
+#define CONFIG_SYS_MPC85xx_PCIX2_ADDR	(CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_PCIX2_OFFSET)
+#define CONFIG_SYS_MPC85xx_SATA1_OFFSET	(0x18000)
+#define CONFIG_SYS_MPC85xx_SATA1_ADDR	(CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_SATA1_OFFSET)
+#define CONFIG_SYS_MPC85xx_SATA2_OFFSET	(0x19000)
+#define CONFIG_SYS_MPC85xx_SATA2_ADDR	(CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_SATA2_OFFSET)
+#define CONFIG_SYS_MPC85xx_L2_OFFSET	(0x20000)
+#define CONFIG_SYS_MPC85xx_L2_ADDR	(CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_L2_OFFSET)
+#define CONFIG_SYS_MPC85xx_DMA_OFFSET	(0x21000)
+#define CONFIG_SYS_MPC85xx_DMA_ADDR	(CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_DMA_OFFSET)
+#define CONFIG_SYS_MPC85xx_ESDHC_OFFSET	(0x2e000)
+#define CONFIG_SYS_MPC85xx_ESDHC_ADDR	(CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_ESDHC_OFFSET)
+#define CONFIG_SYS_MPC85xx_PIC_OFFSET	(0x40000)
+#define CONFIG_SYS_MPC85xx_PIC_ADDR	(CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_PIC_OFFSET)
+#define CONFIG_SYS_MPC85xx_CPM_OFFSET	(0x80000)
+#define CONFIG_SYS_MPC85xx_CPM_ADDR	(CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_CPM_OFFSET)
+#define CONFIG_SYS_MPC85xx_SERDES1_OFFSET	(0xE3000)
+#define CONFIG_SYS_MPC85xx_SERDES1_ADDR	(CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_SERDES2_OFFSET)
+#define CONFIG_SYS_MPC85xx_SERDES2_OFFSET	(0xE3100)
+#define CONFIG_SYS_MPC85xx_SERDES2_ADDR	(CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_SERDES2_OFFSET)
 
 #endif /*__IMMAP_85xx__*/
diff --git a/include/asm-ppc/immap_86xx.h b/include/asm-ppc/immap_86xx.h
index 03a25c794..df28c0f2c 100644
--- a/include/asm-ppc/immap_86xx.h
+++ b/include/asm-ppc/immap_86xx.h
@@ -1348,9 +1348,9 @@ typedef struct immap {
 
 extern immap_t  *immr;
 
-#define CFG_MPC86xx_DDR_OFFSET	(0x2000)
-#define CFG_MPC86xx_DDR_ADDR	(CFG_IMMR + CFG_MPC86xx_DDR_OFFSET)
-#define CFG_MPC86xx_DDR2_OFFSET	(0x6000)
-#define CFG_MPC86xx_DDR2_ADDR	(CFG_IMMR + CFG_MPC86xx_DDR2_OFFSET)
+#define CONFIG_SYS_MPC86xx_DDR_OFFSET	(0x2000)
+#define CONFIG_SYS_MPC86xx_DDR_ADDR	(CONFIG_SYS_IMMR + CONFIG_SYS_MPC86xx_DDR_OFFSET)
+#define CONFIG_SYS_MPC86xx_DDR2_OFFSET	(0x6000)
+#define CONFIG_SYS_MPC86xx_DDR2_ADDR	(CONFIG_SYS_IMMR + CONFIG_SYS_MPC86xx_DDR2_OFFSET)
 
 #endif /*__IMMAP_86xx__*/
diff --git a/include/asm-ppc/io.h b/include/asm-ppc/io.h
index c3496818f..64cb746b1 100644
--- a/include/asm-ppc/io.h
+++ b/include/asm-ppc/io.h
@@ -298,4 +298,9 @@ static inline void unmap_physmem(void *vaddr, unsigned long flags)
 
 }
 
+static inline phys_addr_t virt_to_phys(void * vaddr)
+{
+	return (phys_addr_t)((unsigned long)vaddr);
+}
+
 #endif
diff --git a/include/asm-ppc/iopin_8260.h b/include/asm-ppc/iopin_8260.h
index 21ed8c2ec..619f3a8ab 100644
--- a/include/asm-ppc/iopin_8260.h
+++ b/include/asm-ppc/iopin_8260.h
@@ -26,140 +26,140 @@ iopin_t;
 extern __inline__ void
 iopin_set_high(iopin_t *iopin)
 {
-    volatile uint *datp = &((immap_t *)CFG_IMMR)->im_ioport.iop_pdata;
+    volatile uint *datp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pdata;
     datp[iopin->port * 8] |= (1 << (31 - iopin->pin));
 }
 
 extern __inline__ void
 iopin_set_low(iopin_t *iopin)
 {
-    volatile uint *datp = &((immap_t *)CFG_IMMR)->im_ioport.iop_pdata;
+    volatile uint *datp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pdata;
     datp[iopin->port * 8] &= ~(1 << (31 - iopin->pin));
 }
 
 extern __inline__ uint
 iopin_is_high(iopin_t *iopin)
 {
-    volatile uint *datp = &((immap_t *)CFG_IMMR)->im_ioport.iop_pdata;
+    volatile uint *datp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pdata;
     return (datp[iopin->port * 8] >> (31 - iopin->pin)) & 1;
 }
 
 extern __inline__ uint
 iopin_is_low(iopin_t *iopin)
 {
-    volatile uint *datp = &((immap_t *)CFG_IMMR)->im_ioport.iop_pdata;
+    volatile uint *datp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pdata;
     return ((datp[iopin->port * 8] >> (31 - iopin->pin)) & 1) ^ 1;
 }
 
 extern __inline__ void
 iopin_set_out(iopin_t *iopin)
 {
-    volatile uint *dirp = &((immap_t *)CFG_IMMR)->im_ioport.iop_pdira;
+    volatile uint *dirp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pdira;
     dirp[iopin->port * 8] |= (1 << (31 - iopin->pin));
 }
 
 extern __inline__ void
 iopin_set_in(iopin_t *iopin)
 {
-    volatile uint *dirp = &((immap_t *)CFG_IMMR)->im_ioport.iop_pdira;
+    volatile uint *dirp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pdira;
     dirp[iopin->port * 8] &= ~(1 << (31 - iopin->pin));
 }
 
 extern __inline__ uint
 iopin_is_out(iopin_t *iopin)
 {
-    volatile uint *dirp = &((immap_t *)CFG_IMMR)->im_ioport.iop_pdira;
+    volatile uint *dirp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pdira;
     return (dirp[iopin->port * 8] >> (31 - iopin->pin)) & 1;
 }
 
 extern __inline__ uint
 iopin_is_in(iopin_t *iopin)
 {
-    volatile uint *dirp = &((immap_t *)CFG_IMMR)->im_ioport.iop_pdira;
+    volatile uint *dirp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pdira;
     return ((dirp[iopin->port * 8] >> (31 - iopin->pin)) & 1) ^ 1;
 }
 
 extern __inline__ void
 iopin_set_odr(iopin_t *iopin)
 {
-    volatile uint *odrp = &((immap_t *)CFG_IMMR)->im_ioport.iop_podra;
+    volatile uint *odrp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_podra;
     odrp[iopin->port * 8] |= (1 << (31 - iopin->pin));
 }
 
 extern __inline__ void
 iopin_set_act(iopin_t *iopin)
 {
-    volatile uint *odrp = &((immap_t *)CFG_IMMR)->im_ioport.iop_podra;
+    volatile uint *odrp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_podra;
     odrp[iopin->port * 8] &= ~(1 << (31 - iopin->pin));
 }
 
 extern __inline__ uint
 iopin_is_odr(iopin_t *iopin)
 {
-    volatile uint *odrp = &((immap_t *)CFG_IMMR)->im_ioport.iop_podra;
+    volatile uint *odrp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_podra;
     return (odrp[iopin->port * 8] >> (31 - iopin->pin)) & 1;
 }
 
 extern __inline__ uint
 iopin_is_act(iopin_t *iopin)
 {
-    volatile uint *odrp = &((immap_t *)CFG_IMMR)->im_ioport.iop_podra;
+    volatile uint *odrp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_podra;
     return ((odrp[iopin->port * 8] >> (31 - iopin->pin)) & 1) ^ 1;
 }
 
 extern __inline__ void
 iopin_set_ded(iopin_t *iopin)
 {
-    volatile uint *parp = &((immap_t *)CFG_IMMR)->im_ioport.iop_ppara;
+    volatile uint *parp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_ppara;
     parp[iopin->port * 8] |= (1 << (31 - iopin->pin));
 }
 
 extern __inline__ void
 iopin_set_gen(iopin_t *iopin)
 {
-    volatile uint *parp = &((immap_t *)CFG_IMMR)->im_ioport.iop_ppara;
+    volatile uint *parp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_ppara;
     parp[iopin->port * 8] &= ~(1 << (31 - iopin->pin));
 }
 
 extern __inline__ uint
 iopin_is_ded(iopin_t *iopin)
 {
-    volatile uint *parp = &((immap_t *)CFG_IMMR)->im_ioport.iop_ppara;
+    volatile uint *parp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_ppara;
     return (parp[iopin->port * 8] >> (31 - iopin->pin)) & 1;
 }
 
 extern __inline__ uint
 iopin_is_gen(iopin_t *iopin)
 {
-    volatile uint *parp = &((immap_t *)CFG_IMMR)->im_ioport.iop_ppara;
+    volatile uint *parp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_ppara;
     return ((parp[iopin->port * 8] >> (31 - iopin->pin)) & 1) ^ 1;
 }
 
 extern __inline__ void
 iopin_set_opt2(iopin_t *iopin)
 {
-    volatile uint *sorp = &((immap_t *)CFG_IMMR)->im_ioport.iop_psora;
+    volatile uint *sorp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_psora;
     sorp[iopin->port * 8] |= (1 << (31 - iopin->pin));
 }
 
 extern __inline__ void
 iopin_set_opt1(iopin_t *iopin)
 {
-    volatile uint *sorp = &((immap_t *)CFG_IMMR)->im_ioport.iop_psora;
+    volatile uint *sorp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_psora;
     sorp[iopin->port * 8] &= ~(1 << (31 - iopin->pin));
 }
 
 extern __inline__ uint
 iopin_is_opt2(iopin_t *iopin)
 {
-    volatile uint *sorp = &((immap_t *)CFG_IMMR)->im_ioport.iop_psora;
+    volatile uint *sorp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_psora;
     return (sorp[iopin->port * 8] >> (31 - iopin->pin)) & 1;
 }
 
 extern __inline__ uint
 iopin_is_opt1(iopin_t *iopin)
 {
-    volatile uint *sorp = &((immap_t *)CFG_IMMR)->im_ioport.iop_psora;
+    volatile uint *sorp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_psora;
     return ((sorp[iopin->port * 8] >> (31 - iopin->pin)) & 1) ^ 1;
 }
 
diff --git a/include/asm-ppc/iopin_85xx.h b/include/asm-ppc/iopin_85xx.h
index daddb554d..0f07ba355 100644
--- a/include/asm-ppc/iopin_85xx.h
+++ b/include/asm-ppc/iopin_85xx.h
@@ -23,121 +23,121 @@ typedef struct {
 
 extern __inline__ void iopin_set_high (iopin_t * iopin)
 {
-	volatile uint *datp = &((ccsr_cpm_t *) CFG_MPC85xx_CPM_ADDR)->im_cpm_iop.pdata;
+	volatile uint *datp = &((ccsr_cpm_t *) CONFIG_SYS_MPC85xx_CPM_ADDR)->im_cpm_iop.pdata;
 	datp[iopin->port * 8] |= (1 << (31 - iopin->pin));
 }
 
 extern __inline__ void iopin_set_low (iopin_t * iopin)
 {
-	volatile uint *datp = &((ccsr_cpm_t *) CFG_MPC85xx_CPM_ADDR)->im_cpm_iop.pdata;
+	volatile uint *datp = &((ccsr_cpm_t *) CONFIG_SYS_MPC85xx_CPM_ADDR)->im_cpm_iop.pdata;
 	datp[iopin->port * 8] &= ~(1 << (31 - iopin->pin));
 }
 
 extern __inline__ uint iopin_is_high (iopin_t * iopin)
 {
-	volatile uint *datp = &((ccsr_cpm_t *) CFG_MPC85xx_CPM_ADDR)->im_cpm_iop.pdata;
+	volatile uint *datp = &((ccsr_cpm_t *) CONFIG_SYS_MPC85xx_CPM_ADDR)->im_cpm_iop.pdata;
 	return (datp[iopin->port * 8] >> (31 - iopin->pin)) & 1;
 }
 
 extern __inline__ uint iopin_is_low (iopin_t * iopin)
 {
-	volatile uint *datp = &((ccsr_cpm_t *) CFG_MPC85xx_CPM_ADDR)->im_cpm_iop.pdata;
+	volatile uint *datp = &((ccsr_cpm_t *) CONFIG_SYS_MPC85xx_CPM_ADDR)->im_cpm_iop.pdata;
 	return ((datp[iopin->port * 8] >> (31 - iopin->pin)) & 1) ^ 1;
 }
 
 extern __inline__ void iopin_set_out (iopin_t * iopin)
 {
-	volatile uint *dirp = &((ccsr_cpm_t *) CFG_MPC85xx_CPM_ADDR)->im_cpm_iop.pdira;
+	volatile uint *dirp = &((ccsr_cpm_t *) CONFIG_SYS_MPC85xx_CPM_ADDR)->im_cpm_iop.pdira;
 	dirp[iopin->port * 8] |= (1 << (31 - iopin->pin));
 }
 
 extern __inline__ void iopin_set_in (iopin_t * iopin)
 {
-	volatile uint *dirp = &((ccsr_cpm_t *) CFG_MPC85xx_CPM_ADDR)->im_cpm_iop.pdira;
+	volatile uint *dirp = &((ccsr_cpm_t *) CONFIG_SYS_MPC85xx_CPM_ADDR)->im_cpm_iop.pdira;
 	dirp[iopin->port * 8] &= ~(1 << (31 - iopin->pin));
 }
 
 extern __inline__ uint iopin_is_out (iopin_t * iopin)
 {
-	volatile uint *dirp = &((ccsr_cpm_t *) CFG_MPC85xx_CPM_ADDR)->im_cpm_iop.pdira;
+	volatile uint *dirp = &((ccsr_cpm_t *) CONFIG_SYS_MPC85xx_CPM_ADDR)->im_cpm_iop.pdira;
 	return (dirp[iopin->port * 8] >> (31 - iopin->pin)) & 1;
 }
 
 extern __inline__ uint iopin_is_in (iopin_t * iopin)
 {
-	volatile uint *dirp = &((ccsr_cpm_t *) CFG_MPC85xx_CPM_ADDR)->im_cpm_iop.pdira;
+	volatile uint *dirp = &((ccsr_cpm_t *) CONFIG_SYS_MPC85xx_CPM_ADDR)->im_cpm_iop.pdira;
 	return ((dirp[iopin->port * 8] >> (31 - iopin->pin)) & 1) ^ 1;
 }
 
 extern __inline__ void iopin_set_odr (iopin_t * iopin)
 {
-	volatile uint *odrp = &((ccsr_cpm_t *) CFG_MPC85xx_CPM_ADDR)->im_cpm_iop.podra;
+	volatile uint *odrp = &((ccsr_cpm_t *) CONFIG_SYS_MPC85xx_CPM_ADDR)->im_cpm_iop.podra;
 	odrp[iopin->port * 8] |= (1 << (31 - iopin->pin));
 }
 
 extern __inline__ void iopin_set_act (iopin_t * iopin)
 {
-	volatile uint *odrp = &((ccsr_cpm_t *) CFG_MPC85xx_CPM_ADDR)->im_cpm_iop.podra;
+	volatile uint *odrp = &((ccsr_cpm_t *) CONFIG_SYS_MPC85xx_CPM_ADDR)->im_cpm_iop.podra;
 	odrp[iopin->port * 8] &= ~(1 << (31 - iopin->pin));
 }
 
 extern __inline__ uint iopin_is_odr (iopin_t * iopin)
 {
-	volatile uint *odrp = &((ccsr_cpm_t *) CFG_MPC85xx_CPM_ADDR)->im_cpm_iop.podra;
+	volatile uint *odrp = &((ccsr_cpm_t *) CONFIG_SYS_MPC85xx_CPM_ADDR)->im_cpm_iop.podra;
 	return (odrp[iopin->port * 8] >> (31 - iopin->pin)) & 1;
 }
 
 extern __inline__ uint iopin_is_act (iopin_t * iopin)
 {
-	volatile uint *odrp = &((ccsr_cpm_t *) CFG_MPC85xx_CPM_ADDR)->im_cpm_iop.podra;
+	volatile uint *odrp = &((ccsr_cpm_t *) CONFIG_SYS_MPC85xx_CPM_ADDR)->im_cpm_iop.podra;
 	return ((odrp[iopin->port * 8] >> (31 - iopin->pin)) & 1) ^ 1;
 }
 
 extern __inline__ void iopin_set_ded (iopin_t * iopin)
 {
-	volatile uint *parp = &((ccsr_cpm_t *) CFG_MPC85xx_CPM_ADDR)->im_cpm_iop.ppara;
+	volatile uint *parp = &((ccsr_cpm_t *) CONFIG_SYS_MPC85xx_CPM_ADDR)->im_cpm_iop.ppara;
 	parp[iopin->port * 8] |= (1 << (31 - iopin->pin));
 }
 
 extern __inline__ void iopin_set_gen (iopin_t * iopin)
 {
-	volatile uint *parp = &((ccsr_cpm_t *) CFG_MPC85xx_CPM_ADDR)->im_cpm_iop.ppara;
+	volatile uint *parp = &((ccsr_cpm_t *) CONFIG_SYS_MPC85xx_CPM_ADDR)->im_cpm_iop.ppara;
 	parp[iopin->port * 8] &= ~(1 << (31 - iopin->pin));
 }
 
 extern __inline__ uint iopin_is_ded (iopin_t * iopin)
 {
-	volatile uint *parp = &((ccsr_cpm_t *) CFG_MPC85xx_CPM_ADDR)->im_cpm_iop.ppara;
+	volatile uint *parp = &((ccsr_cpm_t *) CONFIG_SYS_MPC85xx_CPM_ADDR)->im_cpm_iop.ppara;
 	return (parp[iopin->port * 8] >> (31 - iopin->pin)) & 1;
 }
 
 extern __inline__ uint iopin_is_gen (iopin_t * iopin)
 {
-	volatile uint *parp = &((ccsr_cpm_t *) CFG_MPC85xx_CPM_ADDR)->im_cpm_iop.ppara;
+	volatile uint *parp = &((ccsr_cpm_t *) CONFIG_SYS_MPC85xx_CPM_ADDR)->im_cpm_iop.ppara;
 	return ((parp[iopin->port * 8] >> (31 - iopin->pin)) & 1) ^ 1;
 }
 
 extern __inline__ void iopin_set_opt2 (iopin_t * iopin)
 {
-	volatile uint *sorp = &((ccsr_cpm_t *) CFG_MPC85xx_CPM_ADDR)->im_cpm_iop.psora;
+	volatile uint *sorp = &((ccsr_cpm_t *) CONFIG_SYS_MPC85xx_CPM_ADDR)->im_cpm_iop.psora;
 	sorp[iopin->port * 8] |= (1 << (31 - iopin->pin));
 }
 
 extern __inline__ void iopin_set_opt1 (iopin_t * iopin)
 {
-	volatile uint *sorp = &((ccsr_cpm_t *) CFG_MPC85xx_CPM_ADDR)->im_cpm_iop.psora;
+	volatile uint *sorp = &((ccsr_cpm_t *) CONFIG_SYS_MPC85xx_CPM_ADDR)->im_cpm_iop.psora;
 	sorp[iopin->port * 8] &= ~(1 << (31 - iopin->pin));
 }
 
 extern __inline__ uint iopin_is_opt2 (iopin_t * iopin)
 {
-	volatile uint *sorp = &((ccsr_cpm_t *) CFG_MPC85xx_CPM_ADDR)->im_cpm_iop.psora;
+	volatile uint *sorp = &((ccsr_cpm_t *) CONFIG_SYS_MPC85xx_CPM_ADDR)->im_cpm_iop.psora;
 	return (sorp[iopin->port * 8] >> (31 - iopin->pin)) & 1;
 }
 
 extern __inline__ uint iopin_is_opt1 (iopin_t * iopin)
 {
-	volatile uint *sorp = &((ccsr_cpm_t *) CFG_MPC85xx_CPM_ADDR)->im_cpm_iop.psora;
+	volatile uint *sorp = &((ccsr_cpm_t *) CONFIG_SYS_MPC85xx_CPM_ADDR)->im_cpm_iop.psora;
 	return ((sorp[iopin->port * 8] >> (31 - iopin->pin)) & 1) ^ 1;
 }
 
diff --git a/include/asm-ppc/iopin_8xx.h b/include/asm-ppc/iopin_8xx.h
index 1946eb24c..3a2a682f6 100644
--- a/include/asm-ppc/iopin_8xx.h
+++ b/include/asm-ppc/iopin_8xx.h
@@ -46,16 +46,16 @@ extern __inline__ void
 iopin_set_high(iopin_t *iopin)
 {
 	if (iopin->port == IOPIN_PORTA) {
-		volatile ushort *datp = &((immap_t *)CFG_IMMR)->im_ioport.iop_padat;
+		volatile ushort *datp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_padat;
 		*datp |= (1 << (15 - iopin->pin));
 	} else if (iopin->port == IOPIN_PORTB) {
-		volatile uint *datp = &((immap_t *)CFG_IMMR)->im_cpm.cp_pbdat;
+		volatile uint *datp = &((immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pbdat;
 		*datp |= (1 << (31 - iopin->pin));
 	} else if (iopin->port == IOPIN_PORTC) {
-		volatile ushort *datp = &((immap_t *)CFG_IMMR)->im_ioport.iop_pcdat;
+		volatile ushort *datp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pcdat;
 		*datp |= (1 << (15 - iopin->pin));
 	} else if (iopin->port == IOPIN_PORTD) {
-		volatile ushort *datp = &((immap_t *)CFG_IMMR)->im_ioport.iop_pddat;
+		volatile ushort *datp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pddat;
 		*datp |= (1 << (15 - iopin->pin));
 	}
 }
@@ -64,16 +64,16 @@ extern __inline__ void
 iopin_set_low(iopin_t *iopin)
 {
 	if (iopin->port == IOPIN_PORTA) {
-		volatile ushort *datp = &((immap_t *)CFG_IMMR)->im_ioport.iop_padat;
+		volatile ushort *datp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_padat;
 		*datp &= ~(1 << (15 - iopin->pin));
 	} else if (iopin->port == IOPIN_PORTB) {
-		volatile uint *datp = &((immap_t *)CFG_IMMR)->im_cpm.cp_pbdat;
+		volatile uint *datp = &((immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pbdat;
 		*datp &= ~(1 << (31 - iopin->pin));
 	} else if (iopin->port == IOPIN_PORTC) {
-		volatile ushort *datp = &((immap_t *)CFG_IMMR)->im_ioport.iop_pcdat;
+		volatile ushort *datp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pcdat;
 		*datp &= ~(1 << (15 - iopin->pin));
 	} else if (iopin->port == IOPIN_PORTD) {
-		volatile ushort *datp = &((immap_t *)CFG_IMMR)->im_ioport.iop_pddat;
+		volatile ushort *datp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pddat;
 		*datp &= ~(1 << (15 - iopin->pin));
 	}
 }
@@ -82,16 +82,16 @@ extern __inline__ uint
 iopin_is_high(iopin_t *iopin)
 {
 	if (iopin->port == IOPIN_PORTA) {
-		volatile ushort *datp = &((immap_t *)CFG_IMMR)->im_ioport.iop_padat;
+		volatile ushort *datp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_padat;
 		return (*datp >> (15 - iopin->pin)) & 1;
 	} else if (iopin->port == IOPIN_PORTB) {
-		volatile uint *datp = &((immap_t *)CFG_IMMR)->im_cpm.cp_pbdat;
+		volatile uint *datp = &((immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pbdat;
 		return (*datp >> (31 - iopin->pin)) & 1;
 	} else if (iopin->port == IOPIN_PORTC) {
-		volatile ushort *datp = &((immap_t *)CFG_IMMR)->im_ioport.iop_pcdat;
+		volatile ushort *datp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pcdat;
 		return (*datp >> (15 - iopin->pin)) & 1;
 	} else if (iopin->port == IOPIN_PORTD) {
-		volatile ushort *datp = &((immap_t *)CFG_IMMR)->im_ioport.iop_pddat;
+		volatile ushort *datp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pddat;
 		return (*datp >> (15 - iopin->pin)) & 1;
 	}
 	return 0;
@@ -101,16 +101,16 @@ extern __inline__ uint
 iopin_is_low(iopin_t *iopin)
 {
 	if (iopin->port == IOPIN_PORTA) {
-		volatile ushort *datp = &((immap_t *)CFG_IMMR)->im_ioport.iop_padat;
+		volatile ushort *datp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_padat;
 		return ((*datp >> (15 - iopin->pin)) & 1) ^ 1;
 	} else if (iopin->port == IOPIN_PORTB) {
-		volatile uint *datp = &((immap_t *)CFG_IMMR)->im_cpm.cp_pbdat;
+		volatile uint *datp = &((immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pbdat;
 		return ((*datp >> (31 - iopin->pin)) & 1) ^ 1;
 	} else if (iopin->port == IOPIN_PORTC) {
-		volatile ushort *datp = &((immap_t *)CFG_IMMR)->im_ioport.iop_pcdat;
+		volatile ushort *datp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pcdat;
 		return ((*datp >> (15 - iopin->pin)) & 1) ^ 1;
 	} else if (iopin->port == IOPIN_PORTD) {
-		volatile ushort *datp = &((immap_t *)CFG_IMMR)->im_ioport.iop_pddat;
+		volatile ushort *datp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pddat;
 		return ((*datp >> (15 - iopin->pin)) & 1) ^ 1;
 	}
 	return 0;
@@ -120,16 +120,16 @@ extern __inline__ void
 iopin_set_out(iopin_t *iopin)
 {
 	if (iopin->port == IOPIN_PORTA) {
-		volatile ushort *dirp = &((immap_t *)CFG_IMMR)->im_ioport.iop_padir;
+		volatile ushort *dirp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_padir;
 		*dirp |= (1 << (15 - iopin->pin));
 	} else if (iopin->port == IOPIN_PORTB) {
-		volatile uint *dirp = &((immap_t *)CFG_IMMR)->im_cpm.cp_pbdir;
+		volatile uint *dirp = &((immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pbdir;
 		*dirp |= (1 << (31 - iopin->pin));
 	} else if (iopin->port == IOPIN_PORTC) {
-		volatile ushort *dirp = &((immap_t *)CFG_IMMR)->im_ioport.iop_pcdir;
+		volatile ushort *dirp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pcdir;
 		*dirp |= (1 << (15 - iopin->pin));
 	} else if (iopin->port == IOPIN_PORTD) {
-		volatile ushort *dirp = &((immap_t *)CFG_IMMR)->im_ioport.iop_pddir;
+		volatile ushort *dirp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pddir;
 		*dirp |= (1 << (15 - iopin->pin));
 	}
 }
@@ -138,16 +138,16 @@ extern __inline__ void
 iopin_set_in(iopin_t *iopin)
 {
 	if (iopin->port == IOPIN_PORTA) {
-		volatile ushort *dirp = &((immap_t *)CFG_IMMR)->im_ioport.iop_padir;
+		volatile ushort *dirp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_padir;
 		*dirp &= ~(1 << (15 - iopin->pin));
 	} else if (iopin->port == IOPIN_PORTB) {
-		volatile uint *dirp = &((immap_t *)CFG_IMMR)->im_cpm.cp_pbdir;
+		volatile uint *dirp = &((immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pbdir;
 		*dirp &= ~(1 << (31 - iopin->pin));
 	} else if (iopin->port == IOPIN_PORTC) {
-		volatile ushort *dirp = &((immap_t *)CFG_IMMR)->im_ioport.iop_pcdir;
+		volatile ushort *dirp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pcdir;
 		*dirp &= ~(1 << (15 - iopin->pin));
 	} else if (iopin->port == IOPIN_PORTD) {
-		volatile ushort *dirp = &((immap_t *)CFG_IMMR)->im_ioport.iop_pddir;
+		volatile ushort *dirp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pddir;
 		*dirp &= ~(1 << (15 - iopin->pin));
 	}
 }
@@ -156,16 +156,16 @@ extern __inline__ uint
 iopin_is_out(iopin_t *iopin)
 {
 	if (iopin->port == IOPIN_PORTA) {
-		volatile ushort *dirp = &((immap_t *)CFG_IMMR)->im_ioport.iop_padir;
+		volatile ushort *dirp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_padir;
 		return (*dirp >> (15 - iopin->pin)) & 1;
 	} else if (iopin->port == IOPIN_PORTB) {
-		volatile uint *dirp = &((immap_t *)CFG_IMMR)->im_cpm.cp_pbdir;
+		volatile uint *dirp = &((immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pbdir;
 		return (*dirp >> (31 - iopin->pin)) & 1;
 	} else if (iopin->port == IOPIN_PORTC) {
-		volatile ushort *dirp = &((immap_t *)CFG_IMMR)->im_ioport.iop_pcdir;
+		volatile ushort *dirp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pcdir;
 		return (*dirp >> (15 - iopin->pin)) & 1;
 	} else if (iopin->port == IOPIN_PORTD) {
-		volatile ushort *dirp = &((immap_t *)CFG_IMMR)->im_ioport.iop_pddir;
+		volatile ushort *dirp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pddir;
 		return (*dirp >> (15 - iopin->pin)) & 1;
 	}
 	return 0;
@@ -175,16 +175,16 @@ extern __inline__ uint
 iopin_is_in(iopin_t *iopin)
 {
 	if (iopin->port == IOPIN_PORTA) {
-		volatile ushort *dirp = &((immap_t *)CFG_IMMR)->im_ioport.iop_padir;
+		volatile ushort *dirp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_padir;
 		return ((*dirp >> (15 - iopin->pin)) & 1) ^ 1;
 	} else if (iopin->port == IOPIN_PORTB) {
-		volatile uint *dirp = &((immap_t *)CFG_IMMR)->im_cpm.cp_pbdir;
+		volatile uint *dirp = &((immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pbdir;
 		return ((*dirp >> (31 - iopin->pin)) & 1) ^ 1;
 	} else if (iopin->port == IOPIN_PORTC) {
-		volatile ushort *dirp = &((immap_t *)CFG_IMMR)->im_ioport.iop_pcdir;
+		volatile ushort *dirp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pcdir;
 		return ((*dirp >> (15 - iopin->pin)) & 1) ^ 1;
 	} else if (iopin->port == IOPIN_PORTD) {
-		volatile ushort *dirp = &((immap_t *)CFG_IMMR)->im_ioport.iop_pddir;
+		volatile ushort *dirp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pddir;
 		return ((*dirp >> (15 - iopin->pin)) & 1) ^ 1;
 	}
 	return 0;
@@ -194,10 +194,10 @@ extern __inline__ void
 iopin_set_odr(iopin_t *iopin)
 {
 	if (iopin->port == IOPIN_PORTA) {
-		volatile ushort *odrp = &((immap_t *)CFG_IMMR)->im_ioport.iop_paodr;
+		volatile ushort *odrp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_paodr;
 		*odrp |= (1 << (15 - iopin->pin));
 	} else if (iopin->port == IOPIN_PORTB) {
-		volatile ushort *odrp = &((immap_t *)CFG_IMMR)->im_cpm.cp_pbodr;
+		volatile ushort *odrp = &((immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pbodr;
 		*odrp |= (1 << (31 - iopin->pin));
 	}
 }
@@ -206,10 +206,10 @@ extern __inline__ void
 iopin_set_act(iopin_t *iopin)
 {
 	if (iopin->port == IOPIN_PORTA) {
-		volatile ushort *odrp = &((immap_t *)CFG_IMMR)->im_ioport.iop_paodr;
+		volatile ushort *odrp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_paodr;
 		*odrp &= ~(1 << (15 - iopin->pin));
 	} else if (iopin->port == IOPIN_PORTB) {
-		volatile ushort *odrp = &((immap_t *)CFG_IMMR)->im_cpm.cp_pbodr;
+		volatile ushort *odrp = &((immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pbodr;
 		*odrp &= ~(1 << (31 - iopin->pin));
 	}
 }
@@ -218,10 +218,10 @@ extern __inline__ uint
 iopin_is_odr(iopin_t *iopin)
 {
 	if (iopin->port == IOPIN_PORTA) {
-		volatile ushort *odrp = &((immap_t *)CFG_IMMR)->im_ioport.iop_paodr;
+		volatile ushort *odrp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_paodr;
 		return (*odrp >> (15 - iopin->pin)) & 1;
 	} else if (iopin->port == IOPIN_PORTB) {
-		volatile ushort *odrp = &((immap_t *)CFG_IMMR)->im_cpm.cp_pbodr;
+		volatile ushort *odrp = &((immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pbodr;
 		return (*odrp >> (31 - iopin->pin)) & 1;
 	}
 	return 0;
@@ -231,10 +231,10 @@ extern __inline__ uint
 iopin_is_act(iopin_t *iopin)
 {
 	if (iopin->port == IOPIN_PORTA) {
-		volatile ushort *odrp = &((immap_t *)CFG_IMMR)->im_ioport.iop_paodr;
+		volatile ushort *odrp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_paodr;
 		return ((*odrp >> (15 - iopin->pin)) & 1) ^ 1;
 	} else if (iopin->port == IOPIN_PORTB) {
-		volatile ushort *odrp = &((immap_t *)CFG_IMMR)->im_cpm.cp_pbodr;
+		volatile ushort *odrp = &((immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pbodr;
 		return ((*odrp >> (31 - iopin->pin)) & 1) ^ 1;
 	}
 	return 0;
@@ -244,16 +244,16 @@ extern __inline__ void
 iopin_set_ded(iopin_t *iopin)
 {
 	if (iopin->port == IOPIN_PORTA) {
-		volatile ushort *parp = &((immap_t *)CFG_IMMR)->im_ioport.iop_papar;
+		volatile ushort *parp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_papar;
 		*parp |= (1 << (15 - iopin->pin));
 	} else if (iopin->port == IOPIN_PORTB) {
-		volatile uint *parp = &((immap_t *)CFG_IMMR)->im_cpm.cp_pbpar;
+		volatile uint *parp = &((immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pbpar;
 		*parp |= (1 << (31 - iopin->pin));
 	} else if (iopin->port == IOPIN_PORTC) {
-		volatile ushort *parp = &((immap_t *)CFG_IMMR)->im_ioport.iop_pcpar;
+		volatile ushort *parp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pcpar;
 		*parp |= (1 << (15 - iopin->pin));
 	} else if (iopin->port == IOPIN_PORTD) {
-		volatile ushort *parp = &((immap_t *)CFG_IMMR)->im_ioport.iop_pdpar;
+		volatile ushort *parp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pdpar;
 		*parp |= (1 << (15 - iopin->pin));
 	}
 }
@@ -262,16 +262,16 @@ extern __inline__ void
 iopin_set_gen(iopin_t *iopin)
 {
 	if (iopin->port == IOPIN_PORTA) {
-		volatile ushort *parp = &((immap_t *)CFG_IMMR)->im_ioport.iop_papar;
+		volatile ushort *parp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_papar;
 		*parp &= ~(1 << (15 - iopin->pin));
 	} else if (iopin->port == IOPIN_PORTB) {
-		volatile uint *parp = &((immap_t *)CFG_IMMR)->im_cpm.cp_pbpar;
+		volatile uint *parp = &((immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pbpar;
 		*parp &= ~(1 << (31 - iopin->pin));
 	} else if (iopin->port == IOPIN_PORTC) {
-		volatile ushort *parp = &((immap_t *)CFG_IMMR)->im_ioport.iop_pcpar;
+		volatile ushort *parp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pcpar;
 		*parp &= ~(1 << (15 - iopin->pin));
 	} else if (iopin->port == IOPIN_PORTD) {
-		volatile ushort *parp = &((immap_t *)CFG_IMMR)->im_ioport.iop_pdpar;
+		volatile ushort *parp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pdpar;
 		*parp &= ~(1 << (15 - iopin->pin));
 	}
 }
@@ -280,16 +280,16 @@ extern __inline__ uint
 iopin_is_ded(iopin_t *iopin)
 {
 	if (iopin->port == IOPIN_PORTA) {
-		volatile ushort *parp = &((immap_t *)CFG_IMMR)->im_ioport.iop_papar;
+		volatile ushort *parp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_papar;
 		return (*parp >> (15 - iopin->pin)) & 1;
 	} else if (iopin->port == IOPIN_PORTB) {
-		volatile uint *parp = &((immap_t *)CFG_IMMR)->im_cpm.cp_pbpar;
+		volatile uint *parp = &((immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pbpar;
 		return (*parp >> (31 - iopin->pin)) & 1;
 	} else if (iopin->port == IOPIN_PORTC) {
-		volatile ushort *parp = &((immap_t *)CFG_IMMR)->im_ioport.iop_pcpar;
+		volatile ushort *parp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pcpar;
 		return (*parp >> (15 - iopin->pin)) & 1;
 	} else if (iopin->port == IOPIN_PORTD) {
-		volatile ushort *parp = &((immap_t *)CFG_IMMR)->im_ioport.iop_pdpar;
+		volatile ushort *parp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pdpar;
 		return (*parp >> (15 - iopin->pin)) & 1;
 	}
 	return 0;
@@ -299,16 +299,16 @@ extern __inline__ uint
 iopin_is_gen(iopin_t *iopin)
 {
 	if (iopin->port == IOPIN_PORTA) {
-		volatile ushort *parp = &((immap_t *)CFG_IMMR)->im_ioport.iop_papar;
+		volatile ushort *parp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_papar;
 		return ((*parp >> (15 - iopin->pin)) & 1) ^ 1;
 	} else if (iopin->port == IOPIN_PORTB) {
-		volatile uint *parp = &((immap_t *)CFG_IMMR)->im_cpm.cp_pbpar;
+		volatile uint *parp = &((immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pbpar;
 		return ((*parp >> (31 - iopin->pin)) & 1) ^ 1;
 	} else if (iopin->port == IOPIN_PORTC) {
-		volatile ushort *parp = &((immap_t *)CFG_IMMR)->im_ioport.iop_pcpar;
+		volatile ushort *parp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pcpar;
 		return ((*parp >> (15 - iopin->pin)) & 1) ^ 1;
 	} else if (iopin->port == IOPIN_PORTD) {
-		volatile ushort *parp = &((immap_t *)CFG_IMMR)->im_ioport.iop_pdpar;
+		volatile ushort *parp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pdpar;
 		return ((*parp >> (15 - iopin->pin)) & 1) ^ 1;
 	}
 	return 0;
@@ -318,7 +318,7 @@ extern __inline__ void
 iopin_set_opt2(iopin_t *iopin)
 {
 	if (iopin->port == IOPIN_PORTC) {
-		volatile ushort *sorp = &((immap_t *)CFG_IMMR)->im_ioport.iop_pcso;
+		volatile ushort *sorp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pcso;
 		*sorp |= (1 << (15 - iopin->pin));
 	}
 }
@@ -327,7 +327,7 @@ extern __inline__ void
 iopin_set_opt1(iopin_t *iopin)
 {
 	if (iopin->port == IOPIN_PORTC) {
-		volatile ushort *sorp = &((immap_t *)CFG_IMMR)->im_ioport.iop_pcso;
+		volatile ushort *sorp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pcso;
 		*sorp &= ~(1 << (15 - iopin->pin));
 	}
 }
@@ -336,7 +336,7 @@ extern __inline__ uint
 iopin_is_opt2(iopin_t *iopin)
 {
 	if (iopin->port == IOPIN_PORTC) {
-		volatile ushort *sorp = &((immap_t *)CFG_IMMR)->im_ioport.iop_pcso;
+		volatile ushort *sorp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pcso;
 		return (*sorp >> (15 - iopin->pin)) & 1;
 	}
 	return 0;
@@ -346,7 +346,7 @@ extern __inline__ uint
 iopin_is_opt1(iopin_t *iopin)
 {
 	if (iopin->port == IOPIN_PORTC) {
-		volatile ushort *sorp = &((immap_t *)CFG_IMMR)->im_ioport.iop_pcso;
+		volatile ushort *sorp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pcso;
 		return ((*sorp >> (15 - iopin->pin)) & 1) ^ 1;
 	}
 	return 0;
@@ -356,7 +356,7 @@ extern __inline__ void
 iopin_set_falledge(iopin_t *iopin)
 {
 	if (iopin->port == IOPIN_PORTC) {
-		volatile ushort *intp = &((immap_t *)CFG_IMMR)->im_ioport.iop_pcint;
+		volatile ushort *intp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pcint;
 		*intp |= (1 << (15 - iopin->pin));
 	}
 }
@@ -365,7 +365,7 @@ extern __inline__ void
 iopin_set_anyedge(iopin_t *iopin)
 {
 	if (iopin->port == IOPIN_PORTC) {
-		volatile ushort *intp = &((immap_t *)CFG_IMMR)->im_ioport.iop_pcint;
+		volatile ushort *intp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pcint;
 		*intp &= ~(1 << (15 - iopin->pin));
 	}
 }
@@ -374,7 +374,7 @@ extern __inline__ uint
 iopin_is_falledge(iopin_t *iopin)
 {
 	if (iopin->port == IOPIN_PORTC) {
-		volatile ushort *intp = &((immap_t *)CFG_IMMR)->im_ioport.iop_pcint;
+		volatile ushort *intp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pcint;
 		return (*intp >> (15 - iopin->pin)) & 1;
 	}
 	return 0;
@@ -384,7 +384,7 @@ extern __inline__ uint
 iopin_is_anyedge(iopin_t *iopin)
 {
 	if (iopin->port == IOPIN_PORTC) {
-		volatile ushort *intp = &((immap_t *)CFG_IMMR)->im_ioport.iop_pcint;
+		volatile ushort *intp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pcint;
 		return ((*intp >> (15 - iopin->pin)) & 1) ^ 1;
 	}
 	return 0;
diff --git a/include/asm-ppc/ppc4xx-ebc.h b/include/asm-ppc/ppc4xx-ebc.h
index d180e045f..9680f70d6 100644
--- a/include/asm-ppc/ppc4xx-ebc.h
+++ b/include/asm-ppc/ppc4xx-ebc.h
@@ -35,7 +35,38 @@
 #define CONFIG_EBC_PPC4xx_IBM_VER1
 #endif
 
+/*
+ * Define the max number of EBC banks (chip selects)
+ */
+#if defined(CONFIG_405CR) || defined(CONFIG_405GP) || \
+    defined(CONFIG_405EZ) || \
+    defined(CONFIG_440GP) || defined(CONFIG_440GX)
+#define EBC_NUM_BANKS	8
+#endif
+
+#if defined(CONFIG_405EP)
+#define EBC_NUM_BANKS	5
+#endif
+
+#if defined(CONFIG_405EX) || \
+    defined(CONFIG_460SX)
+#define EBC_NUM_BANKS	4
+#endif
+
+#if defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
+    defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
+    defined(CONFIG_460EX) || defined(CONFIG_460GT)
+#define EBC_NUM_BANKS	6
+#endif
+
+#if defined(CONFIG_440SP) || defined(CONFIG_440SPE)
+#define EBC_NUM_BANKS	3
+#endif
+
 /* Bank Configuration Register */
+#define EBC_BXCR(n)		(n)
+#define EBC_BXCR_BANK_SIZE(n)	(0x100000 << (((n) & EBC_BXCR_BS_MASK) >> 17))
+
 #define	EBC_BXCR_BAS_MASK	PPC_REG_VAL(11, 0xFFF)
 #define EBC_BXCR_BAS_ENCODE(n)	(((static_cast(u32, n)) & EBC_BXCR_BAS_MASK))
 #define EBC_BXCR_BS_MASK	PPC_REG_VAL(14, 0x7)
diff --git a/include/asm-ppc/ppc4xx-isram.h b/include/asm-ppc/ppc4xx-isram.h
new file mode 100644
index 000000000..d6d17ac96
--- /dev/null
+++ b/include/asm-ppc/ppc4xx-isram.h
@@ -0,0 +1,75 @@
+
+/*
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef _PPC4xx_ISRAM_H_
+#define _PPC4xx_ISRAM_H_
+
+/*
+ * Internal SRAM
+ */
+#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
+#define ISRAM0_DCR_BASE 0x380
+#else
+#define ISRAM0_DCR_BASE 0x020
+#endif
+#define ISRAM0_SB0CR	(ISRAM0_DCR_BASE+0x00)	/* SRAM bank config 0*/
+#define ISRAM0_SB1CR	(ISRAM0_DCR_BASE+0x01)	/* SRAM bank config 1*/
+#define ISRAM0_SB2CR	(ISRAM0_DCR_BASE+0x02)	/* SRAM bank config 2*/
+#define ISRAM0_SB3CR	(ISRAM0_DCR_BASE+0x03)	/* SRAM bank config 3*/
+#define ISRAM0_BEAR	(ISRAM0_DCR_BASE+0x04)	/* SRAM bus error addr reg */
+#define ISRAM0_BESR0	(ISRAM0_DCR_BASE+0x05)	/* SRAM bus error status reg 0 */
+#define ISRAM0_BESR1	(ISRAM0_DCR_BASE+0x06)	/* SRAM bus error status reg 1 */
+#define ISRAM0_PMEG	(ISRAM0_DCR_BASE+0x07)	/* SRAM power management */
+#define ISRAM0_CID	(ISRAM0_DCR_BASE+0x08)	/* SRAM bus core id reg */
+#define ISRAM0_REVID	(ISRAM0_DCR_BASE+0x09)	/* SRAM bus revision id reg */
+#define ISRAM0_DPC	(ISRAM0_DCR_BASE+0x0a)	/* SRAM data parity check reg */
+
+#if defined(CONFIG_460EX) || defined(CONFIG_460GT)
+#define ISRAM1_DCR_BASE 0x0B0
+#define ISRAM1_SB0CR	(ISRAM1_DCR_BASE+0x00)	/* SRAM1 bank config 0*/
+#define ISRAM1_BEAR	(ISRAM1_DCR_BASE+0x04)	/* SRAM1 bus error addr reg */
+#define ISRAM1_BESR0	(ISRAM1_DCR_BASE+0x05)	/* SRAM1 bus error status reg 0 */
+#define ISRAM1_BESR1	(ISRAM1_DCR_BASE+0x06)	/* SRAM1 bus error status reg 1 */
+#define ISRAM1_PMEG	(ISRAM1_DCR_BASE+0x07)	/* SRAM1 power management */
+#define ISRAM1_CID	(ISRAM1_DCR_BASE+0x08)	/* SRAM1 bus core id reg */
+#define ISRAM1_REVID	(ISRAM1_DCR_BASE+0x09)	/* SRAM1 bus revision id reg */
+#define ISRAM1_DPC	(ISRAM1_DCR_BASE+0x0a)	/* SRAM1 data parity check reg */
+#endif /* CONFIG_460EX || CONFIG_460GT */
+
+/*
+ * L2 Cache
+ */
+#if defined (CONFIG_440GX) || \
+    defined(CONFIG_440SP) || defined(CONFIG_440SPE) || \
+    defined(CONFIG_460EX) || defined(CONFIG_460GT) || \
+    defined(CONFIG_460SX)
+#define L2_CACHE_BASE	0x030
+#define L2_CACHE_CFG	(L2_CACHE_BASE+0x00)	/* L2 Cache Config      */
+#define L2_CACHE_CMD	(L2_CACHE_BASE+0x01)	/* L2 Cache Command     */
+#define L2_CACHE_ADDR	(L2_CACHE_BASE+0x02)	/* L2 Cache Address     */
+#define L2_CACHE_DATA	(L2_CACHE_BASE+0x03)	/* L2 Cache Data        */
+#define L2_CACHE_STAT	(L2_CACHE_BASE+0x04)	/* L2 Cache Status      */
+#define L2_CACHE_CVER	(L2_CACHE_BASE+0x05)	/* L2 Cache Revision ID */
+#define L2_CACHE_SNP0	(L2_CACHE_BASE+0x06)	/* L2 Cache Snoop reg 0 */
+#define L2_CACHE_SNP1	(L2_CACHE_BASE+0x07)	/* L2 Cache Snoop reg 1 */
+#endif /* CONFIG_440GX */
+
+#endif /* _PPC4xx_ISRAM_H_ */
diff --git a/include/asm-ppc/ppc4xx-sdram.h b/include/asm-ppc/ppc4xx-sdram.h
index 0174d6235..98faced36 100644
--- a/include/asm-ppc/ppc4xx-sdram.h
+++ b/include/asm-ppc/ppc4xx-sdram.h
@@ -29,6 +29,7 @@
 /*
  * SDRAM Controller
  */
+
 /*
  * XXX - ToDo: Revisit file to change all these lower case defines into
  * upper case. Also needs to be done in the controller setup code too
@@ -256,6 +257,7 @@
 #define SDRAM_DLYCAL_DLCV_ENCODE(x)	(((x)<<2) & SDRAM_DLYCAL_DLCV_MASK)
 #define SDRAM_DLYCAL_DLCV_DECODE(x)	(((x) & SDRAM_DLYCAL_DLCV_MASK)>>2)
 
+#if !defined(CONFIG_405EX)
 /*
  * Memory queue defines
  */
@@ -270,8 +272,11 @@
 #define SDRAM_CONF1HB_PRPD	0x00080000	/* PLB Read pipeline Disable - Bit 12 */
 #define SDRAM_CONF1HB_PWPD	0x00040000	/* PLB Write pipeline Disable - Bit 13 */
 #define SDRAM_CONF1HB_PRW	0x00020000	/* PLB Read Wait - Bit 14 */
+#define SDRAM_CONF1HB_RPLM	0x00001000	/* Read Passing Limit 1 - Bits 16..19 */
 #define SDRAM_CONF1HB_RPEN	0x00000800	/* Read Passing Enable - Bit 20 */
 #define SDRAM_CONF1HB_RFTE	0x00000400	/* Read Flow Through Enable - Bit 21 */
+#define SDRAM_CONF1HB_WRCL	0x00000080	/* MCIF Cycle Limit 1 - Bits 22..24 */
+#define SDRAM_CONF1HB_MASK	0x0000F380	/* RPLM & WRCL mask */
 
 #define SDRAM_ERRSTATHB		(SDRAMQ_DCR_BASE+0x7)	/* error status HB             */
 #define SDRAM_ERRADDUHB		(SDRAMQ_DCR_BASE+0x8)	/* error address upper 32 HB   */
@@ -282,8 +287,10 @@
 #define SDRAM_CONF1LL_PRPD	0x00080000		/* PLB Read pipeline Disable - Bit 12 */
 #define SDRAM_CONF1LL_PWPD	0x00040000		/* PLB Write pipeline Disable - Bit 13 */
 #define SDRAM_CONF1LL_PRW	0x00020000		/* PLB Read Wait - Bit 14 */
+#define SDRAM_CONF1LL_RPLM	0x00001000		/* Read Passing Limit 1 - Bits 16..19 */
 #define SDRAM_CONF1LL_RPEN	0x00000800		/* Read Passing Enable - Bit 20 */
 #define SDRAM_CONF1LL_RFTE	0x00000400		/* Read Flow Through Enable - Bit 21 */
+#define SDRAM_CONF1LL_MASK	0x0000F000		/* RPLM mask */
 
 #define SDRAM_ERRSTATLL		(SDRAMQ_DCR_BASE+0xC)	/* error status LL             */
 #define SDRAM_ERRADDULL		(SDRAMQ_DCR_BASE+0xD)	/* error address upper 32 LL   */
@@ -293,7 +300,6 @@
 
 #define SDRAM_PLBADDUHB		(SDRAMQ_DCR_BASE+0x10)  /* PLB base address upper 32 LL */
 
-#if !defined(CONFIG_405EX)
 /*
  * Memory Bank 0-7 configuration
  */
@@ -1401,4 +1407,18 @@
 
 #endif /* CONFIG_SDRAM_PPC4xx_DENALI_DDR2 */
 
+#ifndef __ASSEMBLY__
+/*
+ * Prototypes
+ */
+void inline blank_string(int size);
+inline void ppc4xx_ibm_ddr2_register_dump(void);
+u32 mfdcr_any(u32);
+void mtdcr_any(u32, u32);
+u32 ddr_wrdtr(u32);
+u32 ddr_clktr(u32);
+void spd_ddr_init_hang(void);
+u32 DQS_autocalibration(void);
+#endif /* __ASSEMBLY__ */
+
 #endif /* _PPC4xx_SDRAM_H_ */
diff --git a/include/asm-ppc/status_led.h b/include/asm-ppc/status_led.h
index eb81f371c..037570993 100644
--- a/include/asm-ppc/status_led.h
+++ b/include/asm-ppc/status_led.h
@@ -24,7 +24,7 @@ typedef unsigned long led_id_t;
 
 static inline void __led_init (led_id_t mask, int state)
 {
-	volatile immap_t *immr = (immap_t *) CFG_IMMR;
+	volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
 
 #ifdef STATUS_LED_PAR
 	immr->STATUS_LED_PAR &= ~mask;
@@ -51,12 +51,12 @@ static inline void __led_init (led_id_t mask, int state)
 
 static inline void __led_toggle (led_id_t mask)
 {
-	((immap_t *) CFG_IMMR)->STATUS_LED_DAT ^= mask;
+	((immap_t *) CONFIG_SYS_IMMR)->STATUS_LED_DAT ^= mask;
 }
 
 static inline void __led_set (led_id_t mask, int state)
 {
-	volatile immap_t *immr = (immap_t *) CFG_IMMR;
+	volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
 
 #if (STATUS_LED_ACTIVE == 0)
 	if (state == STATUS_LED_ON)
diff --git a/include/asm-ppc/u-boot.h b/include/asm-ppc/u-boot.h
index 54ac01d36..745190584 100644
--- a/include/asm-ppc/u-boot.h
+++ b/include/asm-ppc/u-boot.h
@@ -111,6 +111,12 @@ typedef struct bd_info {
 #ifdef CONFIG_HAS_ETH3
 	unsigned char   bi_enet3addr[6];
 #endif
+#ifdef CONFIG_HAS_ETH4
+	unsigned char   bi_enet4addr[6];
+#endif
+#ifdef CONFIG_HAS_ETH5
+	unsigned char   bi_enet5addr[6];
+#endif
 
 #if defined(CONFIG_405GP) || defined(CONFIG_405EP) || \
     defined(CONFIG_405EZ) || defined(CONFIG_440GX) || \
diff --git a/include/asm-sh/cache.h b/include/asm-sh/cache.h
index 25b409b6b..2cfc0a794 100644
--- a/include/asm-sh/cache.h
+++ b/include/asm-sh/cache.h
@@ -3,29 +3,31 @@
 
 #if defined(CONFIG_SH4) || defined(CONFIG_SH4A)
 
+int cache_control(unsigned int cmd);
+
 #define L1_CACHE_BYTES 32
 struct __large_struct { unsigned long buf[100]; };
 #define __m(x) (*(struct __large_struct *)(x))
 
-void dcache_wback_range (u32 start, u32 end)
+void dcache_wback_range(u32 start, u32 end)
 {
 	u32 v;
 
 	start &= ~(L1_CACHE_BYTES - 1);
 	for (v = start; v < end; v += L1_CACHE_BYTES) {
-		asm volatile ("ocbwb     %0":	/* no output */
-			      :"m" (__m (v)));
+		asm volatile ("ocbwb     %0" :	/* no output */
+			      : "m" (__m(v)));
 	}
 }
 
-void dcache_invalid_range (u32 start, u32 end)
+void dcache_invalid_range(u32 start, u32 end)
 {
 	u32 v;
 
 	start &= ~(L1_CACHE_BYTES - 1);
 	for (v = start; v < end; v += L1_CACHE_BYTES) {
-		asm volatile ("ocbi     %0":	/* no output */
-			      :"m" (__m (v)));
+		asm volatile ("ocbi     %0" :	/* no output */
+			      : "m" (__m(v)));
 	}
 }
 #endif /* CONFIG_SH4 || CONFIG_SH4A */
diff --git a/include/asm-sh/cpu_sh4.h b/include/asm-sh/cpu_sh4.h
index b6cc6cfbd..d2dbfcd14 100644
--- a/include/asm-sh/cpu_sh4.h
+++ b/include/asm-sh/cpu_sh4.h
@@ -26,8 +26,15 @@
 #define CCR_CACHE_ICI    0x00000800
 
 #define CACHE_OC_ADDRESS_ARRAY	0xf4000000
+
+#if defined (CONFIG_CPU_SH7750) || \
+	defined(CONFIG_CPU_SH7751)
 #define CACHE_OC_WAY_SHIFT	14
 #define CACHE_OC_NUM_ENTRIES	512
+#else
+#define CACHE_OC_WAY_SHIFT	13
+#define CACHE_OC_NUM_ENTRIES	256
+#endif
 #define CACHE_OC_ENTRY_SHIFT	5
 
 #if defined (CONFIG_CPU_SH7750) || \
diff --git a/include/asm-sh/global_data.h b/include/asm-sh/global_data.h
index d61421b68..f8ade5ca6 100644
--- a/include/asm-sh/global_data.h
+++ b/include/asm-sh/global_data.h
@@ -47,6 +47,7 @@ typedef	struct global_data
 #define	GD_FLG_POSTFAIL	0x00008		/* Critical POST test failed		*/
 #define	GD_FLG_POSTSTOP	0x00010		/* POST seqeunce aborted		*/
 #define	GD_FLG_LOGINIT	0x00020		/* Log Buffer has been initialized	*/
+#define GD_FLG_DISABLE_CONSOLE	0x00040		/* Disable console (in & out)	 */
 
 #define DECLARE_GLOBAL_DATA_PTR	register gd_t *gd asm ("r13")
 
diff --git a/include/asm-sh/io.h b/include/asm-sh/io.h
index 740029300..ca598a60f 100644
--- a/include/asm-sh/io.h
+++ b/include/asm-sh/io.h
@@ -34,9 +34,9 @@
 #define __arch_getw(a)			(*(volatile unsigned short *)(a))
 #define __arch_getl(a)			(*(volatile unsigned int *)(a))
 
-#define __arch_putb(v,a)		(*(volatile unsigned char *)(a) = (v))
-#define __arch_putw(v,a)		(*(volatile unsigned short *)(a) = (v))
-#define __arch_putl(v,a)		(*(volatile unsigned int *)(a) = (v))
+#define __arch_putb(v, a)		(*(volatile unsigned char *)(a) = (v))
+#define __arch_putw(v, a)		(*(volatile unsigned short *)(a) = (v))
+#define __arch_putl(v, a)		(*(volatile unsigned int *)(a) = (v))
 
 extern void __raw_writesb(unsigned int addr, const void *data, int bytelen);
 extern void __raw_writesw(unsigned int addr, const void *data, int wordlen);
@@ -46,9 +46,9 @@ extern void __raw_readsb(unsigned int addr, void *data, int bytelen);
 extern void __raw_readsw(unsigned int addr, void *data, int wordlen);
 extern void __raw_readsl(unsigned int addr, void *data, int longlen);
 
-#define __raw_writeb(v,a)		__arch_putb(v,a)
-#define __raw_writew(v,a)		__arch_putw(v,a)
-#define __raw_writel(v,a)		__arch_putl(v,a)
+#define __raw_writeb(v, a)		__arch_putb(v, a)
+#define __raw_writew(v, a)		__arch_putw(v, a)
+#define __raw_writel(v, a)		__arch_putl(v, a)
 
 #define __raw_readb(a)			__arch_getb(a)
 #define __raw_readw(a)			__arch_getw(a)
@@ -59,13 +59,13 @@ extern void __raw_readsl(unsigned int addr, void *data, int longlen);
  * properly.  Spell it out to the compiler in some cases.
  * These are only valid for small values of "off" (< 1<<12)
  */
-#define __raw_base_writeb(val,base,off)	__arch_base_putb(val,base,off)
-#define __raw_base_writew(val,base,off)	__arch_base_putw(val,base,off)
-#define __raw_base_writel(val,base,off)	__arch_base_putl(val,base,off)
+#define __raw_base_writeb(val, base, off)	__arch_base_putb(val, base, off)
+#define __raw_base_writew(val, base, off)	__arch_base_putw(val, base, off)
+#define __raw_base_writel(val, base, off)	__arch_base_putl(val, base, off)
 
-#define __raw_base_readb(base,off)	__arch_base_getb(base,off)
-#define __raw_base_readw(base,off)	__arch_base_getw(base,off)
-#define __raw_base_readl(base,off)	__arch_base_getl(base,off)
+#define __raw_base_readb(base, off)	__arch_base_getb(base, off)
+#define __raw_base_readw(base, off)	__arch_base_getw(base, off)
+#define __raw_base_readl(base, off)	__arch_base_getl(base, off)
 
 /*
  * Now, pick up the machine-defined IO definitions
@@ -91,36 +91,43 @@ extern void __raw_readsl(unsigned int addr, void *data, int longlen);
  *
  * The {in,out}[bwl] macros are for emulating x86-style PCI/ISA IO space.
  */
-#define outb(v,p)               __raw_writeb(v, p)
-#define outw(v,p)               __raw_writew(cpu_to_le16(v),p)
-#define outl(v,p)               __raw_writel(cpu_to_le32(v),p)
+#define outb(v, p)               __raw_writeb(v, p)
+#define outw(v, p)               __raw_writew(cpu_to_le16(v), p)
+#define outl(v, p)               __raw_writel(cpu_to_le32(v), p)
 
 #define inb(p)  ({ unsigned int __v = __raw_readb(p); __v; })
 #define inw(p)  ({ unsigned int __v = __le16_to_cpu(__raw_readw(p)); __v; })
 #define inl(p)  ({ unsigned int __v = __le32_to_cpu(__raw_readl(p)); __v; })
 
-#define outsb(p,d,l)			__raw_writesb(p,d,l)
-#define outsw(p,d,l)			__raw_writesw(p,d,l)
-#define outsl(p,d,l)			__raw_writesl(p,d,l)
+#define outsb(p, d, l)			__raw_writesb(p, d, l)
+#define outsw(p, d, l)			__raw_writesw(p, d, l)
+#define outsl(p, d, l)			__raw_writesl(p, d, l)
 
-#define insb(p,d,l)			__raw_readsb(p,d,l)
-#define insw(p,d,l)			__raw_readsw(p,d,l)
-#define insl(p,d,l)			__raw_readsl(p,d,l)
+#define insb(p, d, l)			__raw_readsb(p, d, l)
+#define insw(p, d, l)			__raw_readsw(p, d, l)
+#define insl(p, d, l)			__raw_readsl(p, d, l)
 
-#define outb_p(val,port)		outb((val),(port))
-#define outw_p(val,port)		outw((val),(port))
-#define outl_p(val,port)		outl((val),(port))
+#define outb_p(val, port)		outb((val), (port))
+#define outw_p(val, port)		outw((val), (port))
+#define outl_p(val, port)		outl((val), (port))
 #define inb_p(port)			inb((port))
 #define inw_p(port)			inw((port))
 #define inl_p(port)			inl((port))
 
-#define outsb_p(port,from,len)		outsb(port,from,len)
-#define outsw_p(port,from,len)		outsw(port,from,len)
-#define outsl_p(port,from,len)		outsl(port,from,len)
-#define insb_p(port,to,len)		insb(port,to,len)
-#define insw_p(port,to,len)		insw(port,to,len)
-#define insl_p(port,to,len)		insl(port,to,len)
-
+#define outsb_p(port, from, len)		outsb(port, from, len)
+#define outsw_p(port, from, len)		outsw(port, from, len)
+#define outsl_p(port, from, len)		outsl(port, from, len)
+#define insb_p(port, to, len)		insb(port, to, len)
+#define insw_p(port, to, len)		insw(port, to, len)
+#define insl_p(port, to, len)		insl(port, to, len)
+
+/* for U-Boot PCI */
+#define out_8(port, val)	outb(val, port)
+#define out_le16(port, val)	outw(val, port)
+#define out_le32(port, val)	outl(val, port)
+#define in_8(port)			inb(port)
+#define in_le16(port)		inw(port)
+#define in_le32(port)		inl(port)
 /*
  * ioremap and friends.
  *
@@ -128,7 +135,7 @@ extern void __raw_readsl(unsigned int addr, void *data, int longlen);
  * linux/Documentation/IO-mapping.txt.  If you want a
  * physical address, use __ioremap instead.
  */
-extern void * __ioremap(unsigned long offset, size_t size, unsigned long flags);
+extern void *__ioremap(unsigned long offset, size_t size, unsigned long flags);
 extern void __iounmap(void *addr);
 
 /*
@@ -139,20 +146,20 @@ extern void __iounmap(void *addr);
  *  iomem_to_phys(off)
  */
 #ifdef iomem_valid_addr
-#define __arch_ioremap(off,sz,nocache)				\
+#define __arch_ioremap(off, sz, nocache)				\
  ({								\
 	unsigned long _off = (off), _size = (sz);		\
 	void *_ret = (void *)0;					\
 	if (iomem_valid_addr(_off, _size))			\
-		_ret = __ioremap(iomem_to_phys(_off),_size,0);	\
+		_ret = __ioremap(iomem_to_phys(_off), _size, 0);	\
 	_ret;							\
  })
 
 #define __arch_iounmap __iounmap
 #endif
 
-#define ioremap(off,sz)			__arch_ioremap((off),(sz),0)
-#define ioremap_nocache(off,sz)		__arch_ioremap((off),(sz),1)
+#define ioremap(off, sz)			__arch_ioremap((off), (sz), 0)
+#define ioremap_nocache(off, sz)		__arch_ioremap((off), (sz), 1)
 #define iounmap(_addr)			__arch_iounmap(_addr)
 
 /*
@@ -180,19 +187,21 @@ extern void _memset_io(unsigned long, int, size_t);
 #ifdef __mem_pci
 
 #define readb(c) ({ unsigned int __v = __raw_readb(__mem_pci(c)); __v; })
-#define readw(c) ({ unsigned int __v = le16_to_cpu(__raw_readw(__mem_pci(c))); __v; })
-#define readl(c) ({ unsigned int __v = le32_to_cpu(__raw_readl(__mem_pci(c))); __v; })
+#define readw(c)\
+	({ unsigned int __v = le16_to_cpu(__raw_readw(__mem_pci(c))); __v; })
+#define readl(c)\
+	({ unsigned int __v = le32_to_cpu(__raw_readl(__mem_pci(c))); __v; })
 
-#define writeb(v,c)		__raw_writeb(v,__mem_pci(c))
-#define writew(v,c)		__raw_writew(cpu_to_le16(v),__mem_pci(c))
-#define writel(v,c)		__raw_writel(cpu_to_le32(v),__mem_pci(c))
+#define writeb(v, c)		__raw_writeb(v, __mem_pci(c))
+#define writew(v, c)		__raw_writew(cpu_to_le16(v), __mem_pci(c))
+#define writel(v, c)		__raw_writel(cpu_to_le32(v), __mem_pci(c))
 
-#define memset_io(c,v,l)		_memset_io(__mem_pci(c),(v),(l))
-#define memcpy_fromio(a,c,l)		_memcpy_fromio((a),__mem_pci(c),(l))
-#define memcpy_toio(c,a,l)		_memcpy_toio(__mem_pci(c),(a),(l))
+#define memset_io(c, v, l)		_memset_io(__mem_pci(c), (v), (l))
+#define memcpy_fromio(a, c, l)	_memcpy_fromio((a), __mem_pci(c), (l))
+#define memcpy_toio(c, a, l)	_memcpy_toio(__mem_pci(c), (a), (l))
 
-#define eth_io_copy_and_sum(s,c,l,b) \
-				eth_copy_and_sum((s),__mem_pci(c),(l),(b))
+#define eth_io_copy_and_sum(s, c, l, b) \
+				eth_copy_and_sum((s), __mem_pci(c), (l), (b))
 
 static inline int
 check_signature(unsigned long io_addr, const unsigned char *signature,
@@ -216,11 +225,11 @@ out:
 #define readb(addr)	__raw_readb(addr)
 #define readw(addr)	__raw_readw(addr)
 #define readl(addr)	__raw_readl(addr)
-#define writeb(v,addr)	__raw_writeb(v, addr)
-#define writew(v,addr)	__raw_writew(v, addr)
-#define writel(v,addr)	__raw_writel(v, addr)
+#define writeb(v, addr)	__raw_writeb(v, addr)
+#define writew(v, addr)	__raw_writew(v, addr)
+#define writel(v, addr)	__raw_writel(v, addr)
 
-#define check_signature(io,sig,len)	(0)
+#define check_signature(io, sig, len)	(0)
 
 #endif	/* __mem_pci */
 
@@ -252,5 +261,10 @@ static inline void unmap_physmem(void *vaddr, unsigned long flags)
 
 }
 
+static inline phys_addr_t virt_to_phys(void * vaddr)
+{
+	return (phys_addr_t)(vaddr);
+}
+
 #endif	/* __KERNEL__ */
 #endif	/* __ASM_SH_IO_H */
diff --git a/include/asm-sh/pci.h b/include/asm-sh/pci.h
index bc59491c8..040c53213 100644
--- a/include/asm-sh/pci.h
+++ b/include/asm-sh/pci.h
@@ -36,6 +36,7 @@ int pci_sh7780_init(struct pci_controller *hose);
 #error "Not support PCI."
 #endif
 
+int pci_sh4_init(struct pci_controller *hose);
 /* PCI dword read for sh4 */
 int pci_sh4_read_config_dword(struct pci_controller *hose,
 		pci_dev_t dev, int offset, u32 *value);
diff --git a/include/asm-sparc/asmmacro.h b/include/asm-sparc/asmmacro.h
index 0c4cefdf4..aeb87ee7d 100644
--- a/include/asm-sparc/asmmacro.h
+++ b/include/asm-sparc/asmmacro.h
@@ -33,8 +33,8 @@
  * c-code can be called.
  */
 #define SAVE_ALL_HEAD \
-	sethi	%hi(trap_setup+(CFG_RELOC_MONITOR_BASE-TEXT_BASE)), %l4; \
-	jmpl	%l4 + %lo(trap_setup+(CFG_RELOC_MONITOR_BASE-TEXT_BASE)), %l6;
+	sethi	%hi(trap_setup+(CONFIG_SYS_RELOC_MONITOR_BASE-TEXT_BASE)), %l4; \
+	jmpl	%l4 + %lo(trap_setup+(CONFIG_SYS_RELOC_MONITOR_BASE-TEXT_BASE)), %l6;
 #define SAVE_ALL \
 	SAVE_ALL_HEAD \
 	nop;
diff --git a/include/asm-sparc/global_data.h b/include/asm-sparc/global_data.h
index a8d85f1b5..dea285727 100644
--- a/include/asm-sparc/global_data.h
+++ b/include/asm-sparc/global_data.h
@@ -36,7 +36,7 @@
  * global variables during system initialization (until we have set
  * up the memory controller so that we can use RAM).
  *
- * Keep it *SMALL* and remember to set CFG_GBL_DATA_SIZE > sizeof(gd_t)
+ * Keep it *SMALL* and remember to set CONFIG_SYS_GBL_DATA_SIZE > sizeof(gd_t)
  */
 
 typedef struct global_data {
@@ -82,6 +82,7 @@ typedef struct global_data {
 #define	GD_FLG_POSTFAIL	0x00008	/* Critical POST test failed		*/
 #define	GD_FLG_POSTSTOP	0x00010	/* POST seqeunce aborted		*/
 #define	GD_FLG_LOGINIT	0x00020	/* Log Buffer has been initialized	*/
+#define GD_FLG_DISABLE_CONSOLE	0x00040		/* Disable console (in & out)	 */
 
 #define DECLARE_GLOBAL_DATA_PTR     register volatile gd_t *gd asm ("%g7")
 
diff --git a/include/asm-sparc/io.h b/include/asm-sparc/io.h
index ede0b1a8d..0c5d86cb3 100644
--- a/include/asm-sparc/io.h
+++ b/include/asm-sparc/io.h
@@ -32,7 +32,7 @@
  * over and over again resulting in a hang (until an IRQ if lucky)
  *
  */
-#ifndef CFG_HAS_NO_CACHE
+#ifndef CONFIG_SYS_HAS_NO_CACHE
 #define READ_BYTE(var)  SPARC_NOCACHE_READ_BYTE((unsigned int)(var))
 #define READ_HWORD(var) SPARC_NOCACHE_READ_HWORD((unsigned int)(var))
 #define READ_WORD(var)  SPARC_NOCACHE_READ((unsigned int)(var))
@@ -90,4 +90,9 @@ static inline void unmap_physmem(void *vaddr, unsigned long flags)
 
 }
 
+static inline phys_addr_t virt_to_phys(void * vaddr)
+{
+	return (phys_addr_t)(vaddr);
+}
+
 #endif
diff --git a/include/ata.h b/include/ata.h
index 239676958..b51475da8 100644
--- a/include/ata.h
+++ b/include/ata.h
@@ -39,13 +39,13 @@
  * 8-bit (register) and 16-bit (data) accesses might use different
  * address spaces. This is implemented by the following definitions.
  */
-#ifndef CFG_ATA_STRIDE
-#define CFG_ATA_STRIDE	1
+#ifndef CONFIG_SYS_ATA_STRIDE
+#define CONFIG_SYS_ATA_STRIDE	1
 #endif
 
-#define ATA_IO_DATA(x)	(CFG_ATA_DATA_OFFSET+((x) * CFG_ATA_STRIDE))
-#define ATA_IO_REG(x)	(CFG_ATA_REG_OFFSET +((x) * CFG_ATA_STRIDE))
-#define ATA_IO_ALT(x)	(CFG_ATA_ALT_OFFSET +((x) * CFG_ATA_STRIDE))
+#define ATA_IO_DATA(x)	(CONFIG_SYS_ATA_DATA_OFFSET+((x) * CONFIG_SYS_ATA_STRIDE))
+#define ATA_IO_REG(x)	(CONFIG_SYS_ATA_REG_OFFSET +((x) * CONFIG_SYS_ATA_STRIDE))
+#define ATA_IO_ALT(x)	(CONFIG_SYS_ATA_ALT_OFFSET +((x) * CONFIG_SYS_ATA_STRIDE))
 
 /*
  * I/O Register Descriptions
diff --git a/include/command.h b/include/command.h
index 4a27e9724..a8a153cb0 100644
--- a/include/command.h
+++ b/include/command.h
@@ -45,7 +45,7 @@ struct cmd_tbl_s {
 					/* Implementation function	*/
 	int		(*cmd)(struct cmd_tbl_s *, int, int, char *[]);
 	char		*usage;		/* Usage message	(short)	*/
-#ifdef	CFG_LONGHELP
+#ifdef	CONFIG_SYS_LONGHELP
 	char		*help;		/* Help  message	(long)	*/
 #endif
 #ifdef CONFIG_AUTO_COMPLETE
@@ -62,6 +62,7 @@ extern cmd_tbl_t  __u_boot_cmd_end;
 
 /* common/command.c */
 cmd_tbl_t *find_cmd(const char *cmd);
+cmd_tbl_t *find_cmd_tbl (const char *cmd, cmd_tbl_t *table, int table_len);
 
 #ifdef CONFIG_AUTO_COMPLETE
 extern void install_auto_complete(void);
@@ -78,6 +79,15 @@ extern int cmd_auto_complete(const char *const prompt, char *buf, int *np, int *
 
 typedef	void	command_t (cmd_tbl_t *, int, int, char *[]);
 
+#if defined(CONFIG_CMD_MEMORY)		\
+    || defined(CONFIG_CMD_I2C)		\
+    || defined(CONFIG_CMD_ITEST)	\
+    || defined(CONFIG_CMD_PCI)		\
+    || defined(CONFIG_CMD_PORTIO)
+#define CMD_DATA_SIZE
+extern int cmd_get_data_size(char* arg, int default_size);
+#endif
+
 #endif	/* __ASSEMBLY__ */
 
 /*
@@ -88,16 +98,22 @@ typedef	void	command_t (cmd_tbl_t *, int, int, char *[]);
 
 #define Struct_Section  __attribute__ ((unused,section (".u_boot_cmd")))
 
-#ifdef  CFG_LONGHELP
+#ifdef  CONFIG_SYS_LONGHELP
 
 #define U_BOOT_CMD(name,maxargs,rep,cmd,usage,help) \
 cmd_tbl_t __u_boot_cmd_##name Struct_Section = {#name, maxargs, rep, cmd, usage, help}
 
+#define U_BOOT_CMD_MKENT(name,maxargs,rep,cmd,usage,help) \
+{#name, maxargs, rep, cmd, usage, help}
+
 #else	/* no long help info */
 
 #define U_BOOT_CMD(name,maxargs,rep,cmd,usage,help) \
 cmd_tbl_t __u_boot_cmd_##name Struct_Section = {#name, maxargs, rep, cmd, usage}
 
-#endif	/* CFG_LONGHELP */
+#define U_BOOT_CMD_MKENT(name,maxargs,rep,cmd,usage,help) \
+{#name, maxargs, rep, cmd, usage}
+
+#endif	/* CONFIG_SYS_LONGHELP */
 
 #endif	/* __COMMAND_H */
diff --git a/include/common.h b/include/common.h
index a394988b5..5968036a0 100644
--- a/include/common.h
+++ b/include/common.h
@@ -177,6 +177,9 @@ typedef void (interrupt_handler_t)(void *);
 	({ typeof (X) __x = (X), __y = (Y);	\
 		(__x > __y) ? __x : __y; })
 
+#define MIN(x, y)  min(x, y)
+#define MAX(x, y)  max(x, y)
+
 
 /**
  * container_of - cast a member of a structure out to the containing structure
@@ -236,6 +239,9 @@ int	autoscript (ulong addr, const char *fit_uname);
 
 extern ulong load_addr;		/* Default Load Address */
 
+/* common/cmd_doc.c */
+void	doc_probe(unsigned long physadr);
+
 /* common/cmd_nvedit.c */
 int	env_init     (void);
 void	env_relocate (void);
@@ -273,10 +279,10 @@ void	pciinfo	      (int, int);
 #endif
 
 #if defined(CONFIG_PCI) && (defined(CONFIG_440) || defined(CONFIG_405EX))
-#   if defined(CFG_PCI_TARGET_INIT)
+#   if defined(CONFIG_SYS_PCI_TARGET_INIT)
 	void	pci_target_init	     (struct pci_controller *);
 #   endif
-#   if defined(CFG_PCI_MASTER_INIT)
+#   if defined(CONFIG_SYS_PCI_MASTER_INIT)
 	void	pci_master_init	     (struct pci_controller *);
 #   endif
     int	    is_pci_host		(struct pci_controller *);
@@ -319,11 +325,11 @@ extern void  pic_write (uchar reg, uchar val);
  * Set this up regardless of board
  * type, to prevent errors.
  */
-#if defined(CONFIG_SPI) || !defined(CFG_I2C_EEPROM_ADDR)
-# define CFG_DEF_EEPROM_ADDR 0
+#if defined(CONFIG_SPI) || !defined(CONFIG_SYS_I2C_EEPROM_ADDR)
+# define CONFIG_SYS_DEF_EEPROM_ADDR 0
 #else
-# define CFG_DEF_EEPROM_ADDR CFG_I2C_EEPROM_ADDR
-#endif /* CONFIG_SPI || !defined(CFG_I2C_EEPROM_ADDR) */
+# define CONFIG_SYS_DEF_EEPROM_ADDR CONFIG_SYS_I2C_EEPROM_ADDR
+#endif /* CONFIG_SPI || !defined(CONFIG_SYS_I2C_EEPROM_ADDR) */
 
 #if defined(CONFIG_SPI)
 extern void spi_init_f (void);
@@ -373,9 +379,9 @@ int board_postclk_init (void); /* after clocks/timebase, before env/serial */
 int board_early_init_r (void);
 void board_poweroff (void);
 
-#if defined(CFG_DRAM_TEST)
+#if defined(CONFIG_SYS_DRAM_TEST)
 int testdram(void);
-#endif /* CFG_DRAM_TEST */
+#endif /* CONFIG_SYS_DRAM_TEST */
 
 /* $(CPU)/start.S */
 #if defined(CONFIG_5xx) || \
@@ -605,7 +611,7 @@ int	init_timebase (void);
 
 /* lib_generic/vsprintf.c */
 ulong	simple_strtoul(const char *cp,char **endp,unsigned int base);
-#ifdef CFG_64BIT_VSPRINTF
+#ifdef CONFIG_SYS_64BIT_VSPRINTF
 unsigned long long	simple_strtoull(const char *cp,char **endp,unsigned int base);
 #endif
 long	simple_strtol(const char *cp,char **endp,unsigned int base);
@@ -672,6 +678,13 @@ void	fputc(int file, const char c);
 int	ftstc(int file);
 int	fgetc(int file);
 
+/*
+ * CONSOLE multiplexing.
+ */
+#ifdef CONFIG_CONSOLE_MUX
+#include <iomux.h>
+#endif
+
 int	pcmcia_init (void);
 
 #ifdef CONFIG_STATUS_LED
@@ -689,8 +702,9 @@ void __attribute__((weak)) show_boot_progress (int val);
 
 #define ARRAY_SIZE(x) (sizeof(x) / sizeof((x)[0]))
 
-#define DIV_ROUND_UP(n,d) (((n) + (d) - 1) / (d))
-#define roundup(x, y) ((((x) + ((y) - 1)) / (y)) * (y))
+#define DIV_ROUND(n,d)		(((n) + ((d)/2)) / (d))
+#define DIV_ROUND_UP(n,d)	(((n) + (d) - 1) / (d))
+#define roundup(x, y)		((((x) + ((y) - 1)) / (y)) * (y))
 
 #define ALIGN(x,a)		__ALIGN_MASK((x),(typeof(x))(a)-1)
 #define __ALIGN_MASK(x,mask)	(((x)+(mask))&~(mask))
diff --git a/include/commproc.h b/include/commproc.h
index 0a4e817fa..12decfeaa 100644
--- a/include/commproc.h
+++ b/include/commproc.h
@@ -62,7 +62,7 @@
  * as data ram for buffer descriptors, which is all we use right now.
  * Currently the first 512 and last 256 bytes are used for microcode.
  */
-#ifdef  CFG_ALLOC_DPRAM
+#ifdef  CONFIG_SYS_ALLOC_DPRAM
 
 #define CPM_DATAONLY_BASE	((uint)0x0800)
 #define CPM_DATAONLY_SIZE	((uint)0x0700)
@@ -81,16 +81,16 @@
 
 #endif
 
-#ifndef CFG_CPM_POST_WORD_ADDR
+#ifndef CONFIG_SYS_CPM_POST_WORD_ADDR
 #define CPM_POST_WORD_ADDR	0x07FC
 #else
-#define CPM_POST_WORD_ADDR	CFG_CPM_POST_WORD_ADDR
+#define CPM_POST_WORD_ADDR	CONFIG_SYS_CPM_POST_WORD_ADDR
 #endif
 
-#ifndef CFG_CPM_BOOTCOUNT_ADDR
+#ifndef CONFIG_SYS_CPM_BOOTCOUNT_ADDR
 #define CPM_BOOTCOUNT_ADDR	(CPM_POST_WORD_ADDR - 2*sizeof(ulong))
 #else
-#define CPM_BOOTCOUNT_ADDR	CFG_CPM_BOOTCOUNT_ADDR
+#define CPM_BOOTCOUNT_ADDR	CONFIG_SYS_CPM_BOOTCOUNT_ADDR
 #endif
 
 #define BD_IIC_START	((uint) 0x0400) /* <- please use CPM_I2C_BASE !! */
diff --git a/include/configs/A3000.h b/include/configs/A3000.h
index dba1bf727..6d8870c23 100644
--- a/include/configs/A3000.h
+++ b/include/configs/A3000.h
@@ -48,7 +48,7 @@
 
 #define CONFIG_CONS_INDEX	1
 #define CONFIG_BAUDRATE		9600
-#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
 
 #define CONFIG_BOOTDELAY	5
 
@@ -71,16 +71,16 @@
 /*
  * Miscellaneous configurable options
  */
-#undef CFG_LONGHELP			/* undef to save memory		*/
-#define CFG_PROMPT	"A3000> "		/* Monitor Command Prompt	*/
-#define CFG_CBSIZE	256		/* Console I/O Buffer Size	*/
+#undef CONFIG_SYS_LONGHELP			/* undef to save memory		*/
+#define CONFIG_SYS_PROMPT	"A3000> "		/* Monitor Command Prompt	*/
+#define CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size	*/
 
 /* Print Buffer Size
  */
-#define CFG_PBSIZE	(CFG_CBSIZE + sizeof(CFG_PROMPT) + 16)
-#define CFG_MAXARGS	8		/* Max number of command args	*/
-#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size	*/
-#define CFG_LOAD_ADDR	0x00400000	/* Default load address		*/
+#define CONFIG_SYS_PBSIZE	(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
+#define CONFIG_SYS_MAXARGS	8		/* Max number of command args	*/
+#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
+#define CONFIG_SYS_LOAD_ADDR	0x00400000	/* Default load address		*/
 
 /*-----------------------------------------------------------------------
  * PCI stuff
@@ -88,8 +88,8 @@
  */
 #define CONFIG_HARD_I2C		1		/* To enable I2C support	*/
 #undef	CONFIG_SOFT_I2C				/* I2C bit-banged		*/
-#define CFG_I2C_SPEED		400000		/* I2C speed and slave address	*/
-#define CFG_I2C_SLAVE		0x7F
+#define CONFIG_SYS_I2C_SPEED		400000		/* I2C speed and slave address	*/
+#define CONFIG_SYS_I2C_SLAVE		0x7F
 
 /*-----------------------------------------------------------------------
  * PCI stuff
@@ -118,64 +118,64 @@
 /*-----------------------------------------------------------------------
  * Start addresses for the final memory configuration
  * (Set up by the startup code)
- * Please note that CFG_SDRAM_BASE _must_ start at 0
+ * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
  */
-#define CFG_SDRAM_BASE			0x00000000
+#define CONFIG_SYS_SDRAM_BASE			0x00000000
 
-#define CFG_FLASH_BASE0_PRELIM		0xFF000000	/* FLASH bank on RCS#0 */
-#define CFG_FLASH_BASE1_PRELIM		0xFF000000	/* FLASH bank on RCS#1 */
-#define CFG_FLASH_BASE			CFG_FLASH_BASE0_PRELIM
-#define CFG_FLASH_BANKS			{ CFG_FLASH_BASE0_PRELIM }
+#define CONFIG_SYS_FLASH_BASE0_PRELIM		0xFF000000	/* FLASH bank on RCS#0 */
+#define CONFIG_SYS_FLASH_BASE1_PRELIM		0xFF000000	/* FLASH bank on RCS#1 */
+#define CONFIG_SYS_FLASH_BASE			CONFIG_SYS_FLASH_BASE0_PRELIM
+#define CONFIG_SYS_FLASH_BANKS			{ CONFIG_SYS_FLASH_BASE0_PRELIM }
 
 /* even though FLASHP_BASE is FF800000, with 4MB is RCS0, the
  * reset vector is actually located at FFB00100, but the 8245
  * takes care of us.
  */
-#define CFG_RESET_ADDRESS   0xFFF00100
+#define CONFIG_SYS_RESET_ADDRESS   0xFFF00100
 
-#define CFG_EUMB_ADDR	    0xFC000000
+#define CONFIG_SYS_EUMB_ADDR	    0xFC000000
 
-#define CFG_MONITOR_BASE    TEXT_BASE
-#define CFG_MONITOR_LEN	    (256 << 10) /* Reserve 256 kB for Monitor	*/
-#define CFG_MALLOC_LEN	    (128 << 10) /* Reserve 128 kB for malloc()	*/
+#define CONFIG_SYS_MONITOR_BASE    TEXT_BASE
+#define CONFIG_SYS_MONITOR_LEN	    (256 << 10) /* Reserve 256 kB for Monitor	*/
+#define CONFIG_SYS_MALLOC_LEN	    (128 << 10) /* Reserve 128 kB for malloc()	*/
 
-#define CFG_MEMTEST_START   0x00004000	/* memtest works on		*/
-#define CFG_MEMTEST_END	    0x02000000	/* 0 ... 32 MB in DRAM		*/
+#define CONFIG_SYS_MEMTEST_START   0x00004000	/* memtest works on		*/
+#define CONFIG_SYS_MEMTEST_END	    0x02000000	/* 0 ... 32 MB in DRAM		*/
 
 	/* Maximum amount of RAM.
 	 */
-#define CFG_MAX_RAM_SIZE    0x04000000	/* 0 .. 128 MB of (S)DRAM */
+#define CONFIG_SYS_MAX_RAM_SIZE    0x04000000	/* 0 .. 128 MB of (S)DRAM */
 
 
-#if CFG_MONITOR_BASE >= CFG_FLASH_BASE
-#undef CFG_RAMBOOT
+#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE
+#undef CONFIG_SYS_RAMBOOT
 #else
-#define CFG_RAMBOOT
+#define CONFIG_SYS_RAMBOOT
 #endif
 
 /*
  * NS16550 Configuration
  */
-#define CFG_NS16550
-#define CFG_NS16550_SERIAL
+#define CONFIG_SYS_NS16550
+#define CONFIG_SYS_NS16550_SERIAL
 
-#define CFG_NS16550_REG_SIZE	1
+#define CONFIG_SYS_NS16550_REG_SIZE	1
 
-#define CFG_NS16550_CLK		get_bus_freq(0)
+#define CONFIG_SYS_NS16550_CLK		get_bus_freq(0)
 
-#define CFG_NS16550_COM1	(CFG_EUMB_ADDR + 0x4500)
-#define CFG_NS16550_COM2	(CFG_EUMB_ADDR + 0x4600)
+#define CONFIG_SYS_NS16550_COM1	(CONFIG_SYS_EUMB_ADDR + 0x4500)
+#define CONFIG_SYS_NS16550_COM2	(CONFIG_SYS_EUMB_ADDR + 0x4600)
 
 /*-----------------------------------------------------------------------
  * Definitions for initial stack pointer and data area
  */
 
-/* #define CFG_MONITOR_BASE	   TEXT_BASE */
-/*#define CFG_GBL_DATA_SIZE    256*/
-#define CFG_GBL_DATA_SIZE      128
-#define CFG_INIT_RAM_ADDR     0x40000000
-#define CFG_INIT_RAM_END      0x1000
-#define CFG_GBL_DATA_OFFSET  (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+/* #define CONFIG_SYS_MONITOR_BASE	   TEXT_BASE */
+/*#define CONFIG_SYS_GBL_DATA_SIZE    256*/
+#define CONFIG_SYS_GBL_DATA_SIZE      128
+#define CONFIG_SYS_INIT_RAM_ADDR     0x40000000
+#define CONFIG_SYS_INIT_RAM_END      0x1000
+#define CONFIG_SYS_GBL_DATA_OFFSET  (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
 
 
 /*
@@ -186,41 +186,41 @@
  */
 
 #define CONFIG_SYS_CLK_FREQ  33333333	/* external frequency to pll */
-#define CFG_HZ		     1000
+#define CONFIG_SYS_HZ		     1000
 
 	/* Bit-field values for MCCR1.
 	 */
-#define CFG_ROMNAL	    7
-#define CFG_ROMFAL	    11
-#define CFG_DBUS_SIZE	    0x3
+#define CONFIG_SYS_ROMNAL	    7
+#define CONFIG_SYS_ROMFAL	    11
+#define CONFIG_SYS_DBUS_SIZE	    0x3
 
 	/* Bit-field values for MCCR2.
 	 */
-#define CFG_TSWAIT	    0x5		    /* Transaction Start Wait States timer */
-#define CFG_REFINT	    0x400	    /* Refresh interval	FIXME: was 0t430		*/
+#define CONFIG_SYS_TSWAIT	    0x5		    /* Transaction Start Wait States timer */
+#define CONFIG_SYS_REFINT	    0x400	    /* Refresh interval	FIXME: was 0t430		*/
 
 	/* Burst To Precharge. Bits of this value go to MCCR3 and MCCR4.
 	 */
-#define CFG_BSTOPRE	    121
+#define CONFIG_SYS_BSTOPRE	    121
 
 	/* Bit-field values for MCCR3.
 	 */
-#define CFG_REFREC	    8	    /* Refresh to activate interval */
+#define CONFIG_SYS_REFREC	    8	    /* Refresh to activate interval */
 
 	/* Bit-field values for MCCR4.
 	 */
-#define CFG_PRETOACT	    3	    /* Precharge to activate interval FIXME: was 2	*/
-#define CFG_ACTTOPRE	    5	    /* Activate to Precharge interval FIXME: was 5	*/
-#define CFG_ACTORW	    3		/* FIXME was 2 */
-#define CFG_SDMODE_CAS_LAT  3	    /* SDMODE CAS latancy */
-#define CFG_SDMODE_WRAP	    0	    /* SDMODE wrap type	*/
-#define CFG_REGISTERD_TYPE_BUFFER 1
-#define CFG_EXTROM	    1
-#define CFG_REGDIMM	    0
+#define CONFIG_SYS_PRETOACT	    3	    /* Precharge to activate interval FIXME: was 2	*/
+#define CONFIG_SYS_ACTTOPRE	    5	    /* Activate to Precharge interval FIXME: was 5	*/
+#define CONFIG_SYS_ACTORW	    3		/* FIXME was 2 */
+#define CONFIG_SYS_SDMODE_CAS_LAT  3	    /* SDMODE CAS latancy */
+#define CONFIG_SYS_SDMODE_WRAP	    0	    /* SDMODE wrap type	*/
+#define CONFIG_SYS_REGISTERD_TYPE_BUFFER 1
+#define CONFIG_SYS_EXTROM	    1
+#define CONFIG_SYS_REGDIMM	    0
 
-#define CFG_PGMAX	    0x32 /* how long the 8240 reatins the currently accessed page in memory FIXME: was 0x32*/
+#define CONFIG_SYS_PGMAX	    0x32 /* how long the 8240 reatins the currently accessed page in memory FIXME: was 0x32*/
 
-#define CFG_SDRAM_DSCD	0x20	/* SDRAM data in sample clock delay - note bottom 3 bits MUST be 0 */
+#define CONFIG_SYS_SDRAM_DSCD	0x20	/* SDRAM data in sample clock delay - note bottom 3 bits MUST be 0 */
 
 /* Memory bank settings.
  * Only bits 20-29 are actually used from these vales to set the
@@ -229,85 +229,85 @@
  * address. Refer to the MPC8240 book.
  */
 
-#define CFG_BANK0_START	    0x00000000
-#define CFG_BANK0_END	    (CFG_MAX_RAM_SIZE - 1)
-#define CFG_BANK0_ENABLE    1
-#define CFG_BANK1_START	    0x3ff00000
-#define CFG_BANK1_END	    0x3fffffff
-#define CFG_BANK1_ENABLE    0
-#define CFG_BANK2_START	    0x3ff00000
-#define CFG_BANK2_END	    0x3fffffff
-#define CFG_BANK2_ENABLE    0
-#define CFG_BANK3_START	    0x3ff00000
-#define CFG_BANK3_END	    0x3fffffff
-#define CFG_BANK3_ENABLE    0
-#define CFG_BANK4_START	    0x3ff00000
-#define CFG_BANK4_END	    0x3fffffff
-#define CFG_BANK4_ENABLE    0
-#define CFG_BANK5_START	    0x3ff00000
-#define CFG_BANK5_END	    0x3fffffff
-#define CFG_BANK5_ENABLE    0
-#define CFG_BANK6_START	    0x3ff00000
-#define CFG_BANK6_END	    0x3fffffff
-#define CFG_BANK6_ENABLE    0
-#define CFG_BANK7_START	    0x3ff00000
-#define CFG_BANK7_END	    0x3fffffff
-#define CFG_BANK7_ENABLE    0
-
-#define CFG_ODCR	    0xff
-
-#define CFG_IBAT0L  (CFG_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
-#define CFG_IBAT0U  (CFG_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
-
-#define CFG_IBAT1L  (CFG_INIT_RAM_ADDR | BATL_PP_10 | BATL_MEMCOHERENCE)
-#define CFG_IBAT1U  (CFG_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP)
-
-#define CFG_IBAT2L  (0x80000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
-#define CFG_IBAT2U  (0x80000000 | BATU_BL_256M | BATU_VS | BATU_VP)
-
-#define CFG_IBAT3L  (0xF0000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
-#define CFG_IBAT3U  (0xF0000000 | BATU_BL_256M | BATU_VS | BATU_VP)
-
-#define CFG_DBAT0L  CFG_IBAT0L
-#define CFG_DBAT0U  CFG_IBAT0U
-#define CFG_DBAT1L  CFG_IBAT1L
-#define CFG_DBAT1U  CFG_IBAT1U
-#define CFG_DBAT2L  CFG_IBAT2L
-#define CFG_DBAT2U  CFG_IBAT2U
-#define CFG_DBAT3L  CFG_IBAT3L
-#define CFG_DBAT3U  CFG_IBAT3U
+#define CONFIG_SYS_BANK0_START	    0x00000000
+#define CONFIG_SYS_BANK0_END	    (CONFIG_SYS_MAX_RAM_SIZE - 1)
+#define CONFIG_SYS_BANK0_ENABLE    1
+#define CONFIG_SYS_BANK1_START	    0x3ff00000
+#define CONFIG_SYS_BANK1_END	    0x3fffffff
+#define CONFIG_SYS_BANK1_ENABLE    0
+#define CONFIG_SYS_BANK2_START	    0x3ff00000
+#define CONFIG_SYS_BANK2_END	    0x3fffffff
+#define CONFIG_SYS_BANK2_ENABLE    0
+#define CONFIG_SYS_BANK3_START	    0x3ff00000
+#define CONFIG_SYS_BANK3_END	    0x3fffffff
+#define CONFIG_SYS_BANK3_ENABLE    0
+#define CONFIG_SYS_BANK4_START	    0x3ff00000
+#define CONFIG_SYS_BANK4_END	    0x3fffffff
+#define CONFIG_SYS_BANK4_ENABLE    0
+#define CONFIG_SYS_BANK5_START	    0x3ff00000
+#define CONFIG_SYS_BANK5_END	    0x3fffffff
+#define CONFIG_SYS_BANK5_ENABLE    0
+#define CONFIG_SYS_BANK6_START	    0x3ff00000
+#define CONFIG_SYS_BANK6_END	    0x3fffffff
+#define CONFIG_SYS_BANK6_ENABLE    0
+#define CONFIG_SYS_BANK7_START	    0x3ff00000
+#define CONFIG_SYS_BANK7_END	    0x3fffffff
+#define CONFIG_SYS_BANK7_ENABLE    0
+
+#define CONFIG_SYS_ODCR	    0xff
+
+#define CONFIG_SYS_IBAT0L  (CONFIG_SYS_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
+#define CONFIG_SYS_IBAT0U  (CONFIG_SYS_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
+
+#define CONFIG_SYS_IBAT1L  (CONFIG_SYS_INIT_RAM_ADDR | BATL_PP_10 | BATL_MEMCOHERENCE)
+#define CONFIG_SYS_IBAT1U  (CONFIG_SYS_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP)
+
+#define CONFIG_SYS_IBAT2L  (0x80000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
+#define CONFIG_SYS_IBAT2U  (0x80000000 | BATU_BL_256M | BATU_VS | BATU_VP)
+
+#define CONFIG_SYS_IBAT3L  (0xF0000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
+#define CONFIG_SYS_IBAT3U  (0xF0000000 | BATU_BL_256M | BATU_VS | BATU_VP)
+
+#define CONFIG_SYS_DBAT0L  CONFIG_SYS_IBAT0L
+#define CONFIG_SYS_DBAT0U  CONFIG_SYS_IBAT0U
+#define CONFIG_SYS_DBAT1L  CONFIG_SYS_IBAT1L
+#define CONFIG_SYS_DBAT1U  CONFIG_SYS_IBAT1U
+#define CONFIG_SYS_DBAT2L  CONFIG_SYS_IBAT2L
+#define CONFIG_SYS_DBAT2U  CONFIG_SYS_IBAT2U
+#define CONFIG_SYS_DBAT3L  CONFIG_SYS_IBAT3L
+#define CONFIG_SYS_DBAT3U  CONFIG_SYS_IBAT3U
 
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define CFG_BOOTMAPSZ	    (8 << 20)	/* Initial Memory map for Linux */
+#define CONFIG_SYS_BOOTMAPSZ	    (8 << 20)	/* Initial Memory map for Linux */
 
 /*-----------------------------------------------------------------------
  * FLASH organization
  */
-#define CFG_MAX_FLASH_BANKS	1	/* Max number of flash banks		*/
-#define CFG_MAX_FLASH_SECT	128	/* Max number of sectors per flash	*/
+#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* Max number of flash banks		*/
+#define CONFIG_SYS_MAX_FLASH_SECT	128	/* Max number of sectors per flash	*/
 
-#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms) */
-#define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms) */
+#define CONFIG_SYS_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms) */
+#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms) */
 
 
 	/* Warining: environment is not EMBEDDED in the U-Boot code.
 	 * It's stored in flash separately.
 	 */
-#define CFG_ENV_IS_IN_FLASH	    1
-#define CFG_ENV_ADDR		0xFFFE0000
-#define CFG_ENV_SIZE		0x00020000 /* Size of the Environment		*/
-#define CFG_ENV_SECT_SIZE	0x00020000 /* Size of the Environment Sector	*/
+#define CONFIG_ENV_IS_IN_FLASH	    1
+#define CONFIG_ENV_ADDR		0xFFFE0000
+#define CONFIG_ENV_SIZE		0x00020000 /* Size of the Environment		*/
+#define CONFIG_ENV_SECT_SIZE	0x00020000 /* Size of the Environment Sector	*/
 
 /*-----------------------------------------------------------------------
  * Cache Configuration
  */
-#define CFG_CACHELINE_SIZE	32
+#define CONFIG_SYS_CACHELINE_SIZE	32
 #if defined(CONFIG_CMD_KGDB)
-#  define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value	*/
+#  define CONFIG_SYS_CACHELINE_SHIFT	5	/* log base 2 of the above value	*/
 #endif
 
 /*
diff --git a/include/configs/ADCIOP.h b/include/configs/ADCIOP.h
index 5d28168fb..d8303f3b8 100644
--- a/include/configs/ADCIOP.h
+++ b/include/configs/ADCIOP.h
@@ -50,7 +50,7 @@
 #undef	CONFIG_BOOTARGS
 
 #define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
-#define CFG_LOADS_BAUD_CHANGE	1	/* allow baudrate change	*/
+#define CONFIG_SYS_LOADS_BAUD_CHANGE	1	/* allow baudrate change	*/
 
 #undef CONFIG_WATCHDOG			/* watchdog disabled		*/
 
@@ -82,99 +82,99 @@
 /*
  * Miscellaneous configurable options
  */
-#define CFG_LONGHELP			/* undef to save memory		*/
-#define CFG_PROMPT	"=> "		/* Monitor Command Prompt	*/
+#define CONFIG_SYS_LONGHELP			/* undef to save memory		*/
+#define CONFIG_SYS_PROMPT	"=> "		/* Monitor Command Prompt	*/
 #if defined(CONFIG_CMD_KGDB)
-#define CFG_CBSIZE	1024		/* Console I/O Buffer Size	*/
+#define CONFIG_SYS_CBSIZE	1024		/* Console I/O Buffer Size	*/
 #else
-#define CFG_CBSIZE	256		/* Console I/O Buffer Size	*/
+#define CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size	*/
 #endif
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define CFG_MAXARGS	16		/* max number of command args	*/
-#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS	16		/* max number of command args	*/
+#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
 
-#define CFG_CONSOLE_INFO_QUIET	1	/* don't print console @ startup*/
+#define CONFIG_SYS_CONSOLE_INFO_QUIET	1	/* don't print console @ startup*/
 
-#define CFG_MEMTEST_START	0x0400000	/* memtest works on	*/
-#define CFG_MEMTEST_END		0x0C00000	/* 4 ... 12 MB in DRAM	*/
+#define CONFIG_SYS_MEMTEST_START	0x0400000	/* memtest works on	*/
+#define CONFIG_SYS_MEMTEST_END		0x0C00000	/* 4 ... 12 MB in DRAM	*/
 
 /* The following table includes the supported baudrates */
-#define CFG_BAUDRATE_TABLE	\
+#define CONFIG_SYS_BAUDRATE_TABLE	\
 	{ 300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200 }
 
-#define CFG_LOAD_ADDR	0x100000	/* default load address */
+#define CONFIG_SYS_LOAD_ADDR	0x100000	/* default load address */
 
-#define CFG_HZ		1000		/* decrementer freq: 1 ms ticks */
+#define CONFIG_SYS_HZ		1000		/* decrementer freq: 1 ms ticks */
 
 #define CONFIG_ZERO_BOOTDELAY_CHECK	/* check for keypress on bootdelay==0 */
 
 /*-----------------------------------------------------------------------
  * Definitions for initial stack pointer and data area (in DPRAM)
  */
-#define CFG_INIT_RAM_ADDR	0x00df0000 /* inside of SDRAM			*/
-#define CFG_INIT_RAM_END	0x0f00	/* End of used area in RAM	       */
-#define CFG_GBL_DATA_SIZE	64  /* size in bytes reserved for initial data */
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_INIT_RAM_ADDR	0x00df0000 /* inside of SDRAM			*/
+#define CONFIG_SYS_INIT_RAM_END	0x0f00	/* End of used area in RAM	       */
+#define CONFIG_SYS_GBL_DATA_SIZE	64  /* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
 /*-----------------------------------------------------------------------
  * Start addresses for the final memory configuration
  * (Set up by the startup code)
- * Please note that CFG_SDRAM_BASE _must_ start at 0
+ * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
  */
-#define CFG_SDRAM_BASE		0x00000000
-#define CFG_FLASH_BASE		0xFFFD0000
-#define CFG_MONITOR_BASE	CFG_FLASH_BASE
-#define CFG_MONITOR_LEN		(192 << 10)	/* Reserve 192 kB for Monitor	*/
-#define CFG_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/
+#define CONFIG_SYS_SDRAM_BASE		0x00000000
+#define CONFIG_SYS_FLASH_BASE		0xFFFD0000
+#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_FLASH_BASE
+#define CONFIG_SYS_MONITOR_LEN		(192 << 10)	/* Reserve 192 kB for Monitor	*/
+#define CONFIG_SYS_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/
 
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
+#define CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
 /*-----------------------------------------------------------------------
  * FLASH organization
  */
-#define CFG_MAX_FLASH_BANKS	2	/* max number of memory banks		*/
-#define CFG_MAX_FLASH_SECT	256	/* max number of sectors on one chip	*/
+#define CONFIG_SYS_MAX_FLASH_BANKS	2	/* max number of memory banks		*/
+#define CONFIG_SYS_MAX_FLASH_SECT	256	/* max number of sectors on one chip	*/
 
-#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
-#define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
+#define CONFIG_SYS_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
+#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
 
-#define CFG_FLASH_WORD_SIZE	unsigned char	/* flash word size (width)	*/
-#define CFG_FLASH_ADDR0		0x0AA9	/* 1st address for flash config cycles	*/
-#define CFG_FLASH_ADDR1		0x0556	/* 2nd address for flash config cycles	*/
+#define CONFIG_SYS_FLASH_WORD_SIZE	unsigned char	/* flash word size (width)	*/
+#define CONFIG_SYS_FLASH_ADDR0		0x0AA9	/* 1st address for flash config cycles	*/
+#define CONFIG_SYS_FLASH_ADDR1		0x0556	/* 2nd address for flash config cycles	*/
 /*
  * The following defines are added for buggy IOP480 byte interface.
  * All other boards should use the standard values (CPCI405 etc.)
  */
-#define CFG_FLASH_READ0		0x0002	/* 0 is standard			*/
-#define CFG_FLASH_READ1		0x0000	/* 1 is standard			*/
-#define CFG_FLASH_READ2		0x0004	/* 2 is standard			*/
+#define CONFIG_SYS_FLASH_READ0		0x0002	/* 0 is standard			*/
+#define CONFIG_SYS_FLASH_READ1		0x0000	/* 1 is standard			*/
+#define CONFIG_SYS_FLASH_READ2		0x0004	/* 2 is standard			*/
 
-#define CFG_FLASH_EMPTY_INFO		/* print 'E' for empty sector on flinfo */
+#define CONFIG_SYS_FLASH_EMPTY_INFO		/* print 'E' for empty sector on flinfo */
 
 #if 1 /* Use NVRAM for environment variables */
 /*-----------------------------------------------------------------------
  * NVRAM organization
  */
-#define CFG_ENV_IS_IN_NVRAM	1	/* use NVRAM for environment vars	*/
-#define CFG_NVRAM_BASE_ADDR	0x10000000		/* NVRAM base address	*/
-#define CFG_NVRAM_SIZE		(32*1024)		/* NVRAM size		*/
-#define CFG_ENV_SIZE		0x0400		/* Size of Environment vars	*/
-#define CFG_ENV_ADDR		\
-	(CFG_NVRAM_BASE_ADDR+CFG_NVRAM_SIZE-CFG_ENV_SIZE)	/* Env	*/
-#define CFG_VXWORKS_MAC_PTR     (CFG_NVRAM_BASE_ADDR+0x7800) /* VxWorks eth-addr*/
+#define CONFIG_ENV_IS_IN_NVRAM	1	/* use NVRAM for environment vars	*/
+#define CONFIG_SYS_NVRAM_BASE_ADDR	0x10000000		/* NVRAM base address	*/
+#define CONFIG_SYS_NVRAM_SIZE		(32*1024)		/* NVRAM size		*/
+#define CONFIG_ENV_SIZE		0x0400		/* Size of Environment vars	*/
+#define CONFIG_ENV_ADDR		\
+	(CONFIG_SYS_NVRAM_BASE_ADDR+CONFIG_SYS_NVRAM_SIZE-CONFIG_ENV_SIZE)	/* Env	*/
+#define CONFIG_SYS_VXWORKS_MAC_PTR     (CONFIG_SYS_NVRAM_BASE_ADDR+0x7800) /* VxWorks eth-addr*/
 
 #else /* Use FLASH for environment variables */
 
-#define CFG_ENV_IS_IN_FLASH	1
-#define CFG_ENV_OFFSET		0x00010000	/* Offset of Environment Sector */
-#define CFG_ENV_SIZE		0x1000	/* Total Size of Environment Sector	*/
+#define CONFIG_ENV_IS_IN_FLASH	1
+#define CONFIG_ENV_OFFSET		0x00010000	/* Offset of Environment Sector */
+#define CONFIG_ENV_SIZE		0x1000	/* Total Size of Environment Sector	*/
 
-#define CFG_ENV_SECT_SIZE	0x8000	/* see README - env sector total size	*/
+#define CONFIG_ENV_SECT_SIZE	0x8000	/* see README - env sector total size	*/
 
 #endif
 
@@ -188,8 +188,8 @@
 
 #define CONFIG_TULIP
 
-#define CFG_ETH_DEV_FN	     0x0000
-#define CFG_ETH_IOBASE	     0x0fff0000
+#define CONFIG_SYS_ETH_DEV_FN	     0x0000
+#define CONFIG_SYS_ETH_IOBASE	     0x0fff0000
 
 /*
  * Init Memory Controller:
diff --git a/include/configs/ADNPESC1.h b/include/configs/ADNPESC1.h
index 01ee72b8b..e61a3e109 100644
--- a/include/configs/ADNPESC1.h
+++ b/include/configs/ADNPESC1.h
@@ -34,7 +34,7 @@
 #if	defined(CONFIG_NIOS_BASE_32)
 #include <configs/ADNPESC1_base_32.h>
 #else
-#error *** CFG_ERROR: you have to setup right NIOS CPU configuration
+#error *** CONFIG_SYS_ERROR: you have to setup right NIOS CPU configuration
 #endif
 
 /*------------------------------------------------------------------------
@@ -42,36 +42,36 @@
  *----------------------------------------------------------------------*/
 #define CONFIG_NIOS		1		/* NIOS-32 core		*/
 #define	CONFIG_ADNPESC1		1		/* SSV ADNP/ESC1 board	*/
-#define CONFIG_SYS_CLK_FREQ	CFG_NIOS_CPU_CLK/* 50 MHz core clock	*/
-#define	CFG_HZ			1000		/* 1 msec time tick	*/
-#undef  CFG_CLKS_IN_HZ
+#define CONFIG_SYS_CLK_FREQ	CONFIG_SYS_NIOS_CPU_CLK/* 50 MHz core clock	*/
+#define	CONFIG_SYS_HZ			1000		/* 1 msec time tick	*/
+#undef  CONFIG_SYS_CLKS_IN_HZ
 #define	CONFIG_BOARD_EARLY_INIT_F 1	/* enable early board-spec. init*/
 
 /*------------------------------------------------------------------------
  * BASE ADDRESSES / SIZE (Flash, SRAM, SDRAM)
  *----------------------------------------------------------------------*/
-#if	(CFG_NIOS_CPU_SDRAM_SIZE != 0)
+#if	(CONFIG_SYS_NIOS_CPU_SDRAM_SIZE != 0)
 
-#define CFG_SDRAM_BASE		CFG_NIOS_CPU_SDRAM_BASE
-#define CFG_SDRAM_SIZE		CFG_NIOS_CPU_SDRAM_SIZE
+#define CONFIG_SYS_SDRAM_BASE		CONFIG_SYS_NIOS_CPU_SDRAM_BASE
+#define CONFIG_SYS_SDRAM_SIZE		CONFIG_SYS_NIOS_CPU_SDRAM_SIZE
 
 #else
-#error *** CFG_ERROR: you have to setup any SDRAM in NIOS CPU config
+#error *** CONFIG_SYS_ERROR: you have to setup any SDRAM in NIOS CPU config
 #endif
 
-#if	defined(CFG_NIOS_CPU_SRAM_BASE) && defined(CFG_NIOS_CPU_SRAM_SIZE)
+#if	defined(CONFIG_SYS_NIOS_CPU_SRAM_BASE) && defined(CONFIG_SYS_NIOS_CPU_SRAM_SIZE)
 
-#define	CFG_SRAM_BASE		CFG_NIOS_CPU_SRAM_BASE
-#define	CFG_SRAM_SIZE		CFG_NIOS_CPU_SRAM_SIZE
+#define	CONFIG_SYS_SRAM_BASE		CONFIG_SYS_NIOS_CPU_SRAM_BASE
+#define	CONFIG_SYS_SRAM_SIZE		CONFIG_SYS_NIOS_CPU_SRAM_SIZE
 
 #else
 
-#undef	CFG_SRAM_BASE
-#undef	CFG_SRAM_SIZE
+#undef	CONFIG_SYS_SRAM_BASE
+#undef	CONFIG_SYS_SRAM_SIZE
 
 #endif
 
-#define CFG_VECT_BASE		CFG_NIOS_CPU_VEC_BASE
+#define CONFIG_SYS_VECT_BASE		CONFIG_SYS_NIOS_CPU_VEC_BASE
 
 /*------------------------------------------------------------------------
  * MEMORY ORGANIZATION - For the most part, you can put things pretty
@@ -85,77 +85,77 @@
  *	-Global data is placed below the heap.
  *	-The stack is placed below global data (&grows down).
  *----------------------------------------------------------------------*/
-#define CFG_MONITOR_LEN		(256 * 1024)	/* Reserve 256k		*/
-#define CFG_GBL_DATA_SIZE	128		/* Global data size rsvd*/
-#define CFG_MALLOC_LEN		(CFG_ENV_SIZE + 128*1024)
+#define CONFIG_SYS_MONITOR_LEN		(256 * 1024)	/* Reserve 256k		*/
+#define CONFIG_SYS_GBL_DATA_SIZE	128		/* Global data size rsvd*/
+#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + 128*1024)
 
-#define CFG_MONITOR_BASE	TEXT_BASE
-#define CFG_MALLOC_BASE		(CFG_MONITOR_BASE - CFG_MALLOC_LEN)
-#define CFG_GBL_DATA_OFFSET	(CFG_MALLOC_BASE - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP		CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_MONITOR_BASE	TEXT_BASE
+#define CONFIG_SYS_MALLOC_BASE		(CONFIG_SYS_MONITOR_BASE - CONFIG_SYS_MALLOC_LEN)
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_MALLOC_BASE - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP		CONFIG_SYS_GBL_DATA_OFFSET
 
 /*------------------------------------------------------------------------
  * FLASH (AM29LV065D)
  *----------------------------------------------------------------------*/
-#if	(CFG_NIOS_CPU_FLASH_SIZE != 0)
+#if	(CONFIG_SYS_NIOS_CPU_FLASH_SIZE != 0)
 
-#define CFG_FLASH_BASE		CFG_NIOS_CPU_FLASH_BASE
-#define CFG_FLASH_SIZE		CFG_NIOS_CPU_FLASH_SIZE
-#define CFG_MAX_FLASH_SECT	128		/* Max # sects per bank */
-#define CFG_MAX_FLASH_BANKS	1		/* Max # of flash banks */
-#define CFG_FLASH_ERASE_TOUT	8000		/* Erase timeout (msec) */
-#define CFG_FLASH_WRITE_TOUT	100		/* Write timeout (msec) */
-#define CFG_FLASH_WORD_SIZE	unsigned short	/* flash word size	*/
+#define CONFIG_SYS_FLASH_BASE		CONFIG_SYS_NIOS_CPU_FLASH_BASE
+#define CONFIG_SYS_FLASH_SIZE		CONFIG_SYS_NIOS_CPU_FLASH_SIZE
+#define CONFIG_SYS_MAX_FLASH_SECT	128		/* Max # sects per bank */
+#define CONFIG_SYS_MAX_FLASH_BANKS	1		/* Max # of flash banks */
+#define CONFIG_SYS_FLASH_ERASE_TOUT	8000		/* Erase timeout (msec) */
+#define CONFIG_SYS_FLASH_WRITE_TOUT	100		/* Write timeout (msec) */
+#define CONFIG_SYS_FLASH_WORD_SIZE	unsigned short	/* flash word size	*/
 
 #else
-#error *** CFG_ERROR: you have to setup any Flash memory in NIOS CPU config
+#error *** CONFIG_SYS_ERROR: you have to setup any Flash memory in NIOS CPU config
 #endif
 
 /*------------------------------------------------------------------------
  * ENVIRONMENT
  *----------------------------------------------------------------------*/
-#if	(CFG_NIOS_CPU_FLASH_SIZE != 0)
+#if	(CONFIG_SYS_NIOS_CPU_FLASH_SIZE != 0)
 
-#define	CFG_ENV_IS_IN_FLASH	1		/* Environment in flash */
+#define	CONFIG_ENV_IS_IN_FLASH	1		/* Environment in flash */
 
 /* Mem addr of environment */
 #if	defined(CONFIG_NIOS_BASE_32)
-#define CFG_ENV_ADDR		(CFG_FLASH_BASE + CFG_MONITOR_LEN)
+#define CONFIG_ENV_ADDR		(CONFIG_SYS_FLASH_BASE + CONFIG_SYS_MONITOR_LEN)
 #else
-#error *** CFG_ERROR: you have to setup the environment base address CFG_ENV_ADDR
+#error *** CONFIG_SYS_ERROR: you have to setup the environment base address CONFIG_ENV_ADDR
 #endif
 
-#define CFG_ENV_SIZE		(64 * 1024)	/* 64 KByte (1 sector)	*/
+#define CONFIG_ENV_SIZE		(64 * 1024)	/* 64 KByte (1 sector)	*/
 #define CONFIG_ENV_OVERWRITE			/* Serial/eth change Ok */
 
 #else
-#define	CFG_ENV_IS_NOWHERE	1		/* NO Environment	*/
+#define	CONFIG_ENV_IS_NOWHERE	1		/* NO Environment	*/
 #endif
 
 /*------------------------------------------------------------------------
  * NIOS APPLICATION CODE BASE AREA
  *----------------------------------------------------------------------*/
-#if	((CFG_ENV_ADDR + CFG_ENV_SIZE) == 0x1050000)
-#define	CFG_ADNPESC1_UPDATE_LOAD_ADDR	"0x2000100"
-#define CFG_ADNPESC1_NIOS_APPL_ENTRY	"0x1050000"
-#define CFG_ADNPESC1_NIOS_APPL_IDENT	"0x105000c"
-#define	CFG_ADNPESC1_NIOS_APPL_END	"0x11fffff"
-#define CFG_ADNPESC1_FILESYSTEM_BASE	"0x1200000"
-#define	CFG_ADNPESC1_FILESYSTEM_END	"0x17fffff"
+#if	((CONFIG_ENV_ADDR + CONFIG_ENV_SIZE) == 0x1050000)
+#define	CONFIG_SYS_ADNPESC1_UPDATE_LOAD_ADDR	"0x2000100"
+#define CONFIG_SYS_ADNPESC1_NIOS_APPL_ENTRY	"0x1050000"
+#define CONFIG_SYS_ADNPESC1_NIOS_APPL_IDENT	"0x105000c"
+#define	CONFIG_SYS_ADNPESC1_NIOS_APPL_END	"0x11fffff"
+#define CONFIG_SYS_ADNPESC1_FILESYSTEM_BASE	"0x1200000"
+#define	CONFIG_SYS_ADNPESC1_FILESYSTEM_END	"0x17fffff"
 #else
-#error *** CFG_ERROR: missing right appl.code base configuration, expand your config.h
+#error *** CONFIG_SYS_ERROR: missing right appl.code base configuration, expand your config.h
 #endif
-#define CFG_ADNPESC1_NIOS_IDENTIFIER	"Nios"
+#define CONFIG_SYS_ADNPESC1_NIOS_IDENTIFIER	"Nios"
 
 /*------------------------------------------------------------------------
  * BOOT ENVIRONMENT
  *----------------------------------------------------------------------*/
 #ifdef	CONFIG_DNPEVA2			/* DNP/EVA2 base board */
-#define	CFG_ADNPESC1_SLED_BOOT_OFF	"sled boot off; "
-#define	CFG_ADNPESC1_SLED_RED_BLINK	"sled red blink; "
+#define	CONFIG_SYS_ADNPESC1_SLED_BOOT_OFF	"sled boot off; "
+#define	CONFIG_SYS_ADNPESC1_SLED_RED_BLINK	"sled red blink; "
 #else
-#define	CFG_ADNPESC1_SLED_BOOT_OFF
-#define	CFG_ADNPESC1_SLED_RED_BLINK
+#define	CONFIG_SYS_ADNPESC1_SLED_BOOT_OFF
+#define	CONFIG_SYS_ADNPESC1_SLED_RED_BLINK
 #endif
 
 #define	CONFIG_BOOTDELAY	5
@@ -163,10 +163,10 @@
 	"if itest.s *$appl_ident_addr == \"$appl_ident_str\"; "		\
 	"then "								\
 		"wd off; "						\
-		CFG_ADNPESC1_SLED_BOOT_OFF				\
+		CONFIG_SYS_ADNPESC1_SLED_BOOT_OFF				\
 		"go $appl_entry_addr; "					\
 	"else "								\
-		CFG_ADNPESC1_SLED_RED_BLINK				\
+		CONFIG_SYS_ADNPESC1_SLED_RED_BLINK				\
 		"echo *** missing \"$appl_ident_str\" at $appl_ident_addr; "\
 		"echo *** invalid application at $appl_entry_addr; "	\
 		"echo *** stop bootup...; "				\
@@ -176,45 +176,45 @@
  * EXTRA ENVIRONMENT
  *----------------------------------------------------------------------*/
 #ifdef	CONFIG_DNPEVA2			/* DNP/EVA2 base board */
-#define	CFG_ADNPESC1_SLED_YELLO_ON	"sled yellow on; "
-#define	CFG_ADNPESC1_SLED_YELLO_OFF	"sled yellow off; "
+#define	CONFIG_SYS_ADNPESC1_SLED_YELLO_ON	"sled yellow on; "
+#define	CONFIG_SYS_ADNPESC1_SLED_YELLO_OFF	"sled yellow off; "
 #else
-#define	CFG_ADNPESC1_SLED_YELLO_ON
-#define	CFG_ADNPESC1_SLED_YELLO_OFF
+#define	CONFIG_SYS_ADNPESC1_SLED_YELLO_ON
+#define	CONFIG_SYS_ADNPESC1_SLED_YELLO_OFF
 #endif
 
 #define CONFIG_EXTRA_ENV_SETTINGS					\
 	"update_allowed=0\0"						\
-	"update_load_addr="	CFG_ADNPESC1_UPDATE_LOAD_ADDR	"\0"	\
-	"appl_entry_addr="	CFG_ADNPESC1_NIOS_APPL_ENTRY	"\0"	\
-	"appl_end_addr="	CFG_ADNPESC1_NIOS_APPL_END	"\0"	\
-	"appl_ident_addr="	CFG_ADNPESC1_NIOS_APPL_IDENT	"\0"	\
-	"appl_ident_str="	CFG_ADNPESC1_NIOS_IDENTIFIER	"\0"	\
+	"update_load_addr="	CONFIG_SYS_ADNPESC1_UPDATE_LOAD_ADDR	"\0"	\
+	"appl_entry_addr="	CONFIG_SYS_ADNPESC1_NIOS_APPL_ENTRY	"\0"	\
+	"appl_end_addr="	CONFIG_SYS_ADNPESC1_NIOS_APPL_END	"\0"	\
+	"appl_ident_addr="	CONFIG_SYS_ADNPESC1_NIOS_APPL_IDENT	"\0"	\
+	"appl_ident_str="	CONFIG_SYS_ADNPESC1_NIOS_IDENTIFIER	"\0"	\
 	"appl_name=ADNPESC1/base32/linux.bin\0"				\
 	"appl_update="							\
 		"if itest.b $update_allowed != 0; "			\
 		"then "							\
-			CFG_ADNPESC1_SLED_YELLO_ON			\
+			CONFIG_SYS_ADNPESC1_SLED_YELLO_ON			\
 			"tftp $update_load_addr $appl_name; "		\
 			"protect off $appl_entry_addr $appl_end_addr; "	\
 			"era $appl_entry_addr $appl_end_addr; "		\
 			"cp.b $update_load_addr $appl_entry_addr $filesize; "\
-			CFG_ADNPESC1_SLED_YELLO_OFF			\
+			CONFIG_SYS_ADNPESC1_SLED_YELLO_OFF			\
 		"else "							\
 			"echo *** update not allowed (update_allowed=$update_allowed); "\
 		"fi\0"							\
-	"fs_base_addr="		CFG_ADNPESC1_FILESYSTEM_BASE	"\0"	\
-	"fs_end_addr="		CFG_ADNPESC1_FILESYSTEM_END	"\0"	\
+	"fs_base_addr="		CONFIG_SYS_ADNPESC1_FILESYSTEM_BASE	"\0"	\
+	"fs_end_addr="		CONFIG_SYS_ADNPESC1_FILESYSTEM_END	"\0"	\
 	"fs_name=ADNPESC1/base32/romfs.img\0"				\
 	"fs_update="							\
 		"if itest.b $update_allowed != 0; "			\
 		"then "							\
-			CFG_ADNPESC1_SLED_YELLO_ON			\
+			CONFIG_SYS_ADNPESC1_SLED_YELLO_ON			\
 			"tftp $update_load_addr $fs_name; "		\
 			"protect off $fs_base_addr $fs_end_addr; "	\
 			"era $fs_base_addr $fs_end_addr; "		\
 			"cp.b $update_load_addr $fs_base_addr $filesize; "\
-			CFG_ADNPESC1_SLED_YELLO_OFF			\
+			CONFIG_SYS_ADNPESC1_SLED_YELLO_OFF			\
 		"else "							\
 			"echo *** update not allowed (update_allowed=$update_allowed); "\
 		"fi\0"							\
@@ -222,7 +222,7 @@
 	"uboot_loadnrun="						\
 		"if ping $serverip; "					\
 		"then "							\
-			CFG_ADNPESC1_SLED_YELLO_ON			\
+			CONFIG_SYS_ADNPESC1_SLED_YELLO_ON			\
 			"tftp $update_load_addr $uboot_name; "		\
 			"wd off; "					\
 			"go $update_load_addr; "			\
@@ -234,92 +234,92 @@
 /*------------------------------------------------------------------------
  * CONSOLE
  *----------------------------------------------------------------------*/
-#if	(CFG_NIOS_CPU_UART_NUMS != 0)
+#if	(CONFIG_SYS_NIOS_CPU_UART_NUMS != 0)
 
-#define CFG_NIOS_CONSOLE	CFG_NIOS_CPU_UART0 /* 1st UART is Cons. */
+#define CONFIG_SYS_NIOS_CONSOLE	CONFIG_SYS_NIOS_CPU_UART0 /* 1st UART is Cons. */
 
-#if	(CFG_NIOS_CPU_UART0_BR != 0)
-#define CFG_NIOS_FIXEDBAUD	1		   /* Baudrate is fixed	*/
-#define CONFIG_BAUDRATE		CFG_NIOS_CPU_UART0_BR
+#if	(CONFIG_SYS_NIOS_CPU_UART0_BR != 0)
+#define CONFIG_SYS_NIOS_FIXEDBAUD	1		   /* Baudrate is fixed	*/
+#define CONFIG_BAUDRATE		CONFIG_SYS_NIOS_CPU_UART0_BR
 #else
-#undef	CFG_NIOS_FIXEDBAUD
+#undef	CONFIG_SYS_NIOS_FIXEDBAUD
 #define CONFIG_BAUDRATE		115200
 #endif
 
-#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
 
 #else
-#error *** CFG_ERROR: you have to setup at least one UART in NIOS CPU config
+#error *** CONFIG_SYS_ERROR: you have to setup at least one UART in NIOS CPU config
 #endif
 
 /*------------------------------------------------------------------------
  * TIMER FOR TIMEBASE -- Nios doesn't have the equivalent of ppc  PIT,
  * so an avalon bus timer is required.
  *----------------------------------------------------------------------*/
-#if	(CFG_NIOS_CPU_TIMER_NUMS != 0) && defined(CFG_NIOS_CPU_TICK_TIMER)
+#if	(CONFIG_SYS_NIOS_CPU_TIMER_NUMS != 0) && defined(CONFIG_SYS_NIOS_CPU_TICK_TIMER)
 
-#if	(CFG_NIOS_CPU_TICK_TIMER == 0)
+#if	(CONFIG_SYS_NIOS_CPU_TICK_TIMER == 0)
 
-#define CFG_NIOS_TMRBASE	CFG_NIOS_CPU_TIMER0 /* TIMER0 as tick	*/
-#define CFG_NIOS_TMRIRQ		CFG_NIOS_CPU_TIMER0_IRQ
+#define CONFIG_SYS_NIOS_TMRBASE	CONFIG_SYS_NIOS_CPU_TIMER0 /* TIMER0 as tick	*/
+#define CONFIG_SYS_NIOS_TMRIRQ		CONFIG_SYS_NIOS_CPU_TIMER0_IRQ
 
-#if	(CFG_NIOS_CPU_TIMER0_FP == 1)		    /* fixed period */
+#if	(CONFIG_SYS_NIOS_CPU_TIMER0_FP == 1)		    /* fixed period */
 
-#if	(CFG_NIOS_CPU_TIMER0_PER >= CFG_HZ)
-#define CFG_NIOS_TMRMS		(CFG_NIOS_CPU_TIMER0_PER / CFG_HZ)
+#if	(CONFIG_SYS_NIOS_CPU_TIMER0_PER >= CONFIG_SYS_HZ)
+#define CONFIG_SYS_NIOS_TMRMS		(CONFIG_SYS_NIOS_CPU_TIMER0_PER / CONFIG_SYS_HZ)
 #else
-#error *** CFG_ERROR: you have to use a timer periode greater than CFG_HZ
+#error *** CONFIG_SYS_ERROR: you have to use a timer periode greater than CONFIG_SYS_HZ
 #endif
 
-#undef	CFG_NIOS_TMRCNT	/* no preloadable counter value */
+#undef	CONFIG_SYS_NIOS_TMRCNT	/* no preloadable counter value */
 
-#elif	(CFG_NIOS_CPU_TIMER0_FP == 0)		    /* variable period */
+#elif	(CONFIG_SYS_NIOS_CPU_TIMER0_FP == 0)		    /* variable period */
 
-#if	(CFG_HZ <= 1000)
-#define CFG_NIOS_TMRMS		(1000 / CFG_HZ)
+#if	(CONFIG_SYS_HZ <= 1000)
+#define CONFIG_SYS_NIOS_TMRMS		(1000 / CONFIG_SYS_HZ)
 #else
-#error *** CFG_ERROR: sorry, CFG_HZ have to be less than 1000
+#error *** CONFIG_SYS_ERROR: sorry, CONFIG_SYS_HZ have to be less than 1000
 #endif
 
-#define	CFG_NIOS_TMRCNT		(CONFIG_SYS_CLK_FREQ / CFG_HZ)
+#define	CONFIG_SYS_NIOS_TMRCNT		(CONFIG_SYS_CLK_FREQ / CONFIG_SYS_HZ)
 
 #else
-#error *** CFG_ERROR: you have to define CFG_NIOS_CPU_TIMER0_FP correct
+#error *** CONFIG_SYS_ERROR: you have to define CONFIG_SYS_NIOS_CPU_TIMER0_FP correct
 #endif
 
-#elif	(CFG_NIOS_CPU_TICK_TIMER == 1)
+#elif	(CONFIG_SYS_NIOS_CPU_TICK_TIMER == 1)
 
-#define CFG_NIOS_TMRBASE	CFG_NIOS_CPU_TIMER1 /* TIMER1 as tick	*/
-#define CFG_NIOS_TMRIRQ		CFG_NIOS_CPU_TIMER1_IRQ
+#define CONFIG_SYS_NIOS_TMRBASE	CONFIG_SYS_NIOS_CPU_TIMER1 /* TIMER1 as tick	*/
+#define CONFIG_SYS_NIOS_TMRIRQ		CONFIG_SYS_NIOS_CPU_TIMER1_IRQ
 
-#if	(CFG_NIOS_CPU_TIMER1_FP == 1)		    /* fixed period */
+#if	(CONFIG_SYS_NIOS_CPU_TIMER1_FP == 1)		    /* fixed period */
 
-#if	(CFG_NIOS_CPU_TIMER1_PER >= CFG_HZ)
-#define CFG_NIOS_TMRMS		(CFG_NIOS_CPU_TIMER1_PER / CFG_HZ)
+#if	(CONFIG_SYS_NIOS_CPU_TIMER1_PER >= CONFIG_SYS_HZ)
+#define CONFIG_SYS_NIOS_TMRMS		(CONFIG_SYS_NIOS_CPU_TIMER1_PER / CONFIG_SYS_HZ)
 #else
-#error *** CFG_ERROR: you have to use a timer periode greater than CFG_HZ
+#error *** CONFIG_SYS_ERROR: you have to use a timer periode greater than CONFIG_SYS_HZ
 #endif
 
-#undef	CFG_NIOS_TMRCNT	/* no preloadable counter value */
+#undef	CONFIG_SYS_NIOS_TMRCNT	/* no preloadable counter value */
 
-#elif	(CFG_NIOS_CPU_TIMER1_FP == 0)		    /* variable period */
+#elif	(CONFIG_SYS_NIOS_CPU_TIMER1_FP == 0)		    /* variable period */
 
-#if	(CFG_HZ <= 1000)
-#define CFG_NIOS_TMRMS		(1000 / CFG_HZ)
+#if	(CONFIG_SYS_HZ <= 1000)
+#define CONFIG_SYS_NIOS_TMRMS		(1000 / CONFIG_SYS_HZ)
 #else
-#error *** CFG_ERROR: sorry, CFG_HZ have to be less than 1000
+#error *** CONFIG_SYS_ERROR: sorry, CONFIG_SYS_HZ have to be less than 1000
 #endif
 
-#define	CFG_NIOS_TMRCNT		(CONFIG_SYS_CLK_FREQ / CFG_HZ)
+#define	CONFIG_SYS_NIOS_TMRCNT		(CONFIG_SYS_CLK_FREQ / CONFIG_SYS_HZ)
 
 #else
-#error *** CFG_ERROR: you have to define CFG_NIOS_CPU_TIMER1_FP correct
+#error *** CONFIG_SYS_ERROR: you have to define CONFIG_SYS_NIOS_CPU_TIMER1_FP correct
 #endif
 
-#endif	/* CFG_NIOS_CPU_TICK_TIMER */
+#endif	/* CONFIG_SYS_NIOS_CPU_TICK_TIMER */
 
 #else
-#error *** CFG_ERROR: you have to setup at least one TIMER in NIOS CPU config
+#error *** CONFIG_SYS_ERROR: you have to setup at least one TIMER in NIOS CPU config
 #endif
 
 /*------------------------------------------------------------------------
@@ -330,53 +330,53 @@
 #ifdef	CONFIG_HW_WATCHDOG
 
 /* MAX823 supervisor -- watchdog enable port at: */
-#if	(CFG_NIOS_CPU_WDENA_PIO == 0)
-#define	CONFIG_HW_WDENA_BASE	CFG_NIOS_CPU_PIO0	/* PIO0		*/
-#elif	(CFG_NIOS_CPU_WDENA_PIO == 1)
-#define	CONFIG_HW_WDENA_BASE	CFG_NIOS_CPU_PIO1	/* PIO1		*/
-#elif	(CFG_NIOS_CPU_WDENA_PIO == 2)
-#define	CONFIG_HW_WDENA_BASE	CFG_NIOS_CPU_PIO2	/* PIO2		*/
-#elif	(CFG_NIOS_CPU_WDENA_PIO == 3)
-#define	CONFIG_HW_WDENA_BASE	CFG_NIOS_CPU_PIO3	/* PIO3		*/
-#elif	(CFG_NIOS_CPU_WDENA_PIO == 4)
-#define	CONFIG_HW_WDENA_BASE	CFG_NIOS_CPU_PIO4	/* PIO4		*/
-#elif	(CFG_NIOS_CPU_WDENA_PIO == 5)
-#define	CONFIG_HW_WDENA_BASE	CFG_NIOS_CPU_PIO5	/* PIO5		*/
-#elif	(CFG_NIOS_CPU_WDENA_PIO == 6)
-#define	CONFIG_HW_WDENA_BASE	CFG_NIOS_CPU_PIO6	/* PIO6		*/
-#elif	(CFG_NIOS_CPU_WDENA_PIO == 7)
-#define	CONFIG_HW_WDENA_BASE	CFG_NIOS_CPU_PIO7	/* PIO7		*/
-#elif	(CFG_NIOS_CPU_WDENA_PIO == 8)
-#define	CONFIG_HW_WDENA_BASE	CFG_NIOS_CPU_PIO8	/* PIO8		*/
-#elif	(CFG_NIOS_CPU_WDENA_PIO == 9)
-#define	CONFIG_HW_WDENA_BASE	CFG_NIOS_CPU_PIO9	/* PIO9		*/
-#else
-#error *** CFG_ERROR: you have to setup at least one WDENA_PIO in NIOS CPU config
+#if	(CONFIG_SYS_NIOS_CPU_WDENA_PIO == 0)
+#define	CONFIG_HW_WDENA_BASE	CONFIG_SYS_NIOS_CPU_PIO0	/* PIO0		*/
+#elif	(CONFIG_SYS_NIOS_CPU_WDENA_PIO == 1)
+#define	CONFIG_HW_WDENA_BASE	CONFIG_SYS_NIOS_CPU_PIO1	/* PIO1		*/
+#elif	(CONFIG_SYS_NIOS_CPU_WDENA_PIO == 2)
+#define	CONFIG_HW_WDENA_BASE	CONFIG_SYS_NIOS_CPU_PIO2	/* PIO2		*/
+#elif	(CONFIG_SYS_NIOS_CPU_WDENA_PIO == 3)
+#define	CONFIG_HW_WDENA_BASE	CONFIG_SYS_NIOS_CPU_PIO3	/* PIO3		*/
+#elif	(CONFIG_SYS_NIOS_CPU_WDENA_PIO == 4)
+#define	CONFIG_HW_WDENA_BASE	CONFIG_SYS_NIOS_CPU_PIO4	/* PIO4		*/
+#elif	(CONFIG_SYS_NIOS_CPU_WDENA_PIO == 5)
+#define	CONFIG_HW_WDENA_BASE	CONFIG_SYS_NIOS_CPU_PIO5	/* PIO5		*/
+#elif	(CONFIG_SYS_NIOS_CPU_WDENA_PIO == 6)
+#define	CONFIG_HW_WDENA_BASE	CONFIG_SYS_NIOS_CPU_PIO6	/* PIO6		*/
+#elif	(CONFIG_SYS_NIOS_CPU_WDENA_PIO == 7)
+#define	CONFIG_HW_WDENA_BASE	CONFIG_SYS_NIOS_CPU_PIO7	/* PIO7		*/
+#elif	(CONFIG_SYS_NIOS_CPU_WDENA_PIO == 8)
+#define	CONFIG_HW_WDENA_BASE	CONFIG_SYS_NIOS_CPU_PIO8	/* PIO8		*/
+#elif	(CONFIG_SYS_NIOS_CPU_WDENA_PIO == 9)
+#define	CONFIG_HW_WDENA_BASE	CONFIG_SYS_NIOS_CPU_PIO9	/* PIO9		*/
+#else
+#error *** CONFIG_SYS_ERROR: you have to setup at least one WDENA_PIO in NIOS CPU config
 #endif
 
 /* MAX823 supervisor -- watchdog trigger port at: */
-#if	(CFG_NIOS_CPU_WDTOG_PIO == 0)
-#define	CONFIG_HW_WDTOG_BASE	CFG_NIOS_CPU_PIO0	/* PIO0		*/
-#elif	(CFG_NIOS_CPU_WDTOG_PIO == 1)
-#define	CONFIG_HW_WDTOG_BASE	CFG_NIOS_CPU_PIO1	/* PIO1		*/
-#elif	(CFG_NIOS_CPU_WDTOG_PIO == 2)
-#define	CONFIG_HW_WDTOG_BASE	CFG_NIOS_CPU_PIO2	/* PIO2		*/
-#elif	(CFG_NIOS_CPU_WDTOG_PIO == 3)
-#define	CONFIG_HW_WDTOG_BASE	CFG_NIOS_CPU_PIO3	/* PIO3		*/
-#elif	(CFG_NIOS_CPU_WDTOG_PIO == 4)
-#define	CONFIG_HW_WDTOG_BASE	CFG_NIOS_CPU_PIO4	/* PIO4		*/
-#elif	(CFG_NIOS_CPU_WDTOG_PIO == 5)
-#define	CONFIG_HW_WDTOG_BASE	CFG_NIOS_CPU_PIO5	/* PIO5		*/
-#elif	(CFG_NIOS_CPU_WDTOG_PIO == 6)
-#define	CONFIG_HW_WDTOG_BASE	CFG_NIOS_CPU_PIO6	/* PIO6		*/
-#elif	(CFG_NIOS_CPU_WDTOG_PIO == 7)
-#define	CONFIG_HW_WDTOG_BASE	CFG_NIOS_CPU_PIO7	/* PIO7		*/
-#elif	(CFG_NIOS_CPU_WDTOG_PIO == 8)
-#define	CONFIG_HW_WDTOG_BASE	CFG_NIOS_CPU_PIO8	/* PIO8		*/
-#elif	(CFG_NIOS_CPU_WDTOG_PIO == 9)
-#define	CONFIG_HW_WDTOG_BASE	CFG_NIOS_CPU_PIO9	/* PIO9		*/
-#else
-#error *** CFG_ERROR: you have to setup at least one WDTOG_PIO in NIOS CPU config
+#if	(CONFIG_SYS_NIOS_CPU_WDTOG_PIO == 0)
+#define	CONFIG_HW_WDTOG_BASE	CONFIG_SYS_NIOS_CPU_PIO0	/* PIO0		*/
+#elif	(CONFIG_SYS_NIOS_CPU_WDTOG_PIO == 1)
+#define	CONFIG_HW_WDTOG_BASE	CONFIG_SYS_NIOS_CPU_PIO1	/* PIO1		*/
+#elif	(CONFIG_SYS_NIOS_CPU_WDTOG_PIO == 2)
+#define	CONFIG_HW_WDTOG_BASE	CONFIG_SYS_NIOS_CPU_PIO2	/* PIO2		*/
+#elif	(CONFIG_SYS_NIOS_CPU_WDTOG_PIO == 3)
+#define	CONFIG_HW_WDTOG_BASE	CONFIG_SYS_NIOS_CPU_PIO3	/* PIO3		*/
+#elif	(CONFIG_SYS_NIOS_CPU_WDTOG_PIO == 4)
+#define	CONFIG_HW_WDTOG_BASE	CONFIG_SYS_NIOS_CPU_PIO4	/* PIO4		*/
+#elif	(CONFIG_SYS_NIOS_CPU_WDTOG_PIO == 5)
+#define	CONFIG_HW_WDTOG_BASE	CONFIG_SYS_NIOS_CPU_PIO5	/* PIO5		*/
+#elif	(CONFIG_SYS_NIOS_CPU_WDTOG_PIO == 6)
+#define	CONFIG_HW_WDTOG_BASE	CONFIG_SYS_NIOS_CPU_PIO6	/* PIO6		*/
+#elif	(CONFIG_SYS_NIOS_CPU_WDTOG_PIO == 7)
+#define	CONFIG_HW_WDTOG_BASE	CONFIG_SYS_NIOS_CPU_PIO7	/* PIO7		*/
+#elif	(CONFIG_SYS_NIOS_CPU_WDTOG_PIO == 8)
+#define	CONFIG_HW_WDTOG_BASE	CONFIG_SYS_NIOS_CPU_PIO8	/* PIO8		*/
+#elif	(CONFIG_SYS_NIOS_CPU_WDTOG_PIO == 9)
+#define	CONFIG_HW_WDTOG_BASE	CONFIG_SYS_NIOS_CPU_PIO9	/* PIO9		*/
+#else
+#error *** CONFIG_SYS_ERROR: you have to setup at least one WDTOG_PIO in NIOS CPU config
 #endif
 
 #if	defined(CONFIG_NIOS_BASE_32)		/* NIOS CPU specifics	*/
@@ -384,7 +384,7 @@
 #define	CONFIG_HW_WDTOG_BIT		0	/* WD trigger @ Bit 0	*/
 #define	CONFIG_HW_WDPORT_WRONLY	1	/* each WD port wr/only*/
 #else
-#error *** CFG_ERROR: missing watchdog bit configuration, expand your config.h
+#error *** CONFIG_SYS_ERROR: missing watchdog bit configuration, expand your config.h
 #endif
 
 #endif	/* CONFIG_HW_WATCHDOG */
@@ -392,14 +392,14 @@
 /*------------------------------------------------------------------------
  * SERIAL PERIPHAREL INTERFACE
  *----------------------------------------------------------------------*/
-#if	(CFG_NIOS_CPU_SPI_NUMS == 1)
+#if	(CONFIG_SYS_NIOS_CPU_SPI_NUMS == 1)
 
 #define	CONFIG_NIOS_SPI		1		/* SPI support active	*/
-#define	CFG_NIOS_SPIBASE	CFG_NIOS_CPU_SPI0
-#define	CFG_NIOS_SPIBITS	CFG_NIOS_CPU_SPI0_BITS
+#define	CONFIG_SYS_NIOS_SPIBASE	CONFIG_SYS_NIOS_CPU_SPI0
+#define	CONFIG_SYS_NIOS_SPIBITS	CONFIG_SYS_NIOS_CPU_SPI0_BITS
 
 #define	CONFIG_RTC_DS1306	1	/* Dallas 1306 real time clock	*/
-#define CFG_SPI_RTC_DEVID	0	/*        as 1st SPI device	*/
+#define CONFIG_SYS_SPI_RTC_DEVID	0	/*        as 1st SPI device	*/
 
 #else
 #undef	CONFIG_NIOS_SPI				/* NO SPI support	*/
@@ -408,29 +408,29 @@
 /*------------------------------------------------------------------------
  * Ethernet -- needs work!
  *----------------------------------------------------------------------*/
-#if	(CFG_NIOS_CPU_LAN_NUMS == 1)
+#if	(CONFIG_SYS_NIOS_CPU_LAN_NUMS == 1)
 
-#if	(CFG_NIOS_CPU_LAN0_TYPE == 0)		/* LAN91C111		*/
+#if	(CONFIG_SYS_NIOS_CPU_LAN0_TYPE == 0)		/* LAN91C111		*/
 
 #define	CONFIG_DRIVER_SMC91111			/* Using SMC91c111	*/
 #undef	CONFIG_SMC91111_EXT_PHY			/* Internal PHY		*/
-#define	CONFIG_SMC91111_BASE	(CFG_NIOS_CPU_LAN0_BASE + CFG_NIOS_CPU_LAN0_OFFS)
+#define	CONFIG_SMC91111_BASE	(CONFIG_SYS_NIOS_CPU_LAN0_BASE + CONFIG_SYS_NIOS_CPU_LAN0_OFFS)
 
-#if	(CFG_NIOS_CPU_LAN0_BUSW == 32)
+#if	(CONFIG_SYS_NIOS_CPU_LAN0_BUSW == 32)
 #define	CONFIG_SMC_USE_32_BIT	1
 #else	/* no */
 #undef	CONFIG_SMC_USE_32_BIT
 #endif
 
-#elif	(CFG_NIOS_CPU_LAN0_TYPE == 1)		/* CS8900A		*/
+#elif	(CONFIG_SYS_NIOS_CPU_LAN0_TYPE == 1)		/* CS8900A		*/
 
 	/********************************************/
 	/* !!! CS8900 is __not__ tested on NIOS !!! */
 	/********************************************/
 #define	CONFIG_DRIVER_CS8900			/* Using CS8900		*/
-#define	CS8900_BASE		(CFG_NIOS_CPU_LAN0_BASE + CFG_NIOS_CPU_LAN0_OFFS)
+#define	CS8900_BASE		(CONFIG_SYS_NIOS_CPU_LAN0_BASE + CONFIG_SYS_NIOS_CPU_LAN0_OFFS)
 
-#if	(CFG_NIOS_CPU_LAN0_BUSW == 32)
+#if	(CONFIG_SYS_NIOS_CPU_LAN0_BUSW == 32)
 #undef	CS8900_BUS16
 #define	CS8900_BUS32		1
 #else	/* no */
@@ -439,7 +439,7 @@
 #endif
 
 #else
-#error *** CFG_ERROR: invalid LAN0 chip type, check your NIOS CPU config
+#error *** CONFIG_SYS_ERROR: invalid LAN0 chip type, check your NIOS CPU config
 #endif
 
 #define CONFIG_ETHADDR		02:80:ae:20:60:6f
@@ -448,80 +448,80 @@
 #define CONFIG_SERVERIP		192.168.161.85
 
 #else
-#error *** CFG_ERROR: you have to setup just one LAN only or expand your config.h
+#error *** CONFIG_SYS_ERROR: you have to setup just one LAN only or expand your config.h
 #endif
 
 /*------------------------------------------------------------------------
  * STATUS LEDs
  *----------------------------------------------------------------------*/
-#if	(CFG_NIOS_CPU_PIO_NUMS != 0) && defined(CFG_NIOS_CPU_LED_PIO)
+#if	(CONFIG_SYS_NIOS_CPU_PIO_NUMS != 0) && defined(CONFIG_SYS_NIOS_CPU_LED_PIO)
 
-#if	(CFG_NIOS_CPU_LED_PIO == 0)
+#if	(CONFIG_SYS_NIOS_CPU_LED_PIO == 0)
 
-#define	STATUS_LED_BASE			CFG_NIOS_CPU_PIO0
-#define	STATUS_LED_BITS			CFG_NIOS_CPU_PIO0_BITS
+#define	STATUS_LED_BASE			CONFIG_SYS_NIOS_CPU_PIO0
+#define	STATUS_LED_BITS			CONFIG_SYS_NIOS_CPU_PIO0_BITS
 #define	STATUS_LED_ACTIVE		1 /* LED on for bit == 1 */
 
-#if	(CFG_NIOS_CPU_PIO0_TYPE == 1)
+#if	(CONFIG_SYS_NIOS_CPU_PIO0_TYPE == 1)
 #define	STATUS_LED_WRONLY		1
 #else
 #undef	STATUS_LED_WRONLY
 #endif
 
-#elif	(CFG_NIOS_CPU_LED_PIO == 1)
+#elif	(CONFIG_SYS_NIOS_CPU_LED_PIO == 1)
 
-#define	STATUS_LED_BASE			CFG_NIOS_CPU_PIO1
-#define	STATUS_LED_BITS			CFG_NIOS_CPU_PIO1_BITS
+#define	STATUS_LED_BASE			CONFIG_SYS_NIOS_CPU_PIO1
+#define	STATUS_LED_BITS			CONFIG_SYS_NIOS_CPU_PIO1_BITS
 #define	STATUS_LED_ACTIVE		1 /* LED on for bit == 1 */
 
-#if	(CFG_NIOS_CPU_PIO1_TYPE == 1)
+#if	(CONFIG_SYS_NIOS_CPU_PIO1_TYPE == 1)
 #define	STATUS_LED_WRONLY		1
 #else
 #undef	STATUS_LED_WRONLY
 #endif
 
-#elif	(CFG_NIOS_CPU_LED_PIO == 2)
+#elif	(CONFIG_SYS_NIOS_CPU_LED_PIO == 2)
 
-#define	STATUS_LED_BASE			CFG_NIOS_CPU_PIO2
-#define	STATUS_LED_BITS			CFG_NIOS_CPU_PIO2_BITS
+#define	STATUS_LED_BASE			CONFIG_SYS_NIOS_CPU_PIO2
+#define	STATUS_LED_BITS			CONFIG_SYS_NIOS_CPU_PIO2_BITS
 #define	STATUS_LED_ACTIVE		1 /* LED on for bit == 1 */
 
-#if	(CFG_NIOS_CPU_PIO2_TYPE == 1)
+#if	(CONFIG_SYS_NIOS_CPU_PIO2_TYPE == 1)
 #define	STATUS_LED_WRONLY		1
 #else
 #undef	STATUS_LED_WRONLY
 #endif
 
-#elif	(CFG_NIOS_CPU_LED_PIO == 3)
+#elif	(CONFIG_SYS_NIOS_CPU_LED_PIO == 3)
 
-#error *** CFG_ERROR: status LEDs at PIO3 not supported, expand your config.h
+#error *** CONFIG_SYS_ERROR: status LEDs at PIO3 not supported, expand your config.h
 
-#elif	(CFG_NIOS_CPU_LED_PIO == 4)
+#elif	(CONFIG_SYS_NIOS_CPU_LED_PIO == 4)
 
-#error *** CFG_ERROR: status LEDs at PIO4 not supported, expand your config.h
+#error *** CONFIG_SYS_ERROR: status LEDs at PIO4 not supported, expand your config.h
 
-#elif	(CFG_NIOS_CPU_LED_PIO == 5)
+#elif	(CONFIG_SYS_NIOS_CPU_LED_PIO == 5)
 
-#error *** CFG_ERROR: status LEDs at PIO5 not supported, expand your config.h
+#error *** CONFIG_SYS_ERROR: status LEDs at PIO5 not supported, expand your config.h
 
-#elif	(CFG_NIOS_CPU_LED_PIO == 6)
+#elif	(CONFIG_SYS_NIOS_CPU_LED_PIO == 6)
 
-#error *** CFG_ERROR: status LEDs at PIO6 not supported, expand your config.h
+#error *** CONFIG_SYS_ERROR: status LEDs at PIO6 not supported, expand your config.h
 
-#elif	(CFG_NIOS_CPU_LED_PIO == 7)
+#elif	(CONFIG_SYS_NIOS_CPU_LED_PIO == 7)
 
-#error *** CFG_ERROR: status LEDs at PIO7 not supported, expand your config.h
+#error *** CONFIG_SYS_ERROR: status LEDs at PIO7 not supported, expand your config.h
 
-#elif	(CFG_NIOS_CPU_LED_PIO == 8)
+#elif	(CONFIG_SYS_NIOS_CPU_LED_PIO == 8)
 
-#error *** CFG_ERROR: status LEDs at PIO8 not supported, expand your config.h
+#error *** CONFIG_SYS_ERROR: status LEDs at PIO8 not supported, expand your config.h
 
-#elif	(CFG_NIOS_CPU_LED_PIO == 9)
+#elif	(CONFIG_SYS_NIOS_CPU_LED_PIO == 9)
 
-#error *** CFG_ERROR: status LEDs at PIO9 not supported, expand your config.h
+#error *** CONFIG_SYS_ERROR: status LEDs at PIO9 not supported, expand your config.h
 
 #else
-#error *** CFG_ERROR: you have to set CFG_NIOS_CPU_LED_PIO in right case
+#error *** CONFIG_SYS_ERROR: you have to set CONFIG_SYS_NIOS_CPU_LED_PIO in right case
 #endif
 
 #define	CONFIG_STATUS_LED		1 /* enable status led driver */
@@ -529,39 +529,39 @@
 #define	STATUS_LED_BIT			(1 << 0)	/* LED[0] */
 #define	STATUS_LED_STATE		STATUS_LED_BLINKING
 #define	STATUS_LED_BOOT_STATE		STATUS_LED_OFF
-#define	STATUS_LED_PERIOD		(CFG_HZ / 2)	/* ca. 1 Hz */
+#define	STATUS_LED_PERIOD		(CONFIG_SYS_HZ / 2)	/* ca. 1 Hz */
 #define	STATUS_LED_BOOT			0		/* boot LED */
 
 #if	(STATUS_LED_BITS > 1)
 #define	STATUS_LED_BIT1			(1 << 1)	/* LED[1] */
 #define	STATUS_LED_STATE1		STATUS_LED_OFF
-#define	STATUS_LED_PERIOD1		(CFG_HZ / 10)	/* ca. 5 Hz */
+#define	STATUS_LED_PERIOD1		(CONFIG_SYS_HZ / 10)	/* ca. 5 Hz */
 #define	STATUS_LED_RED			1		/* fail LED */
 #endif
 
 #if	(STATUS_LED_BITS > 2)
 #define	STATUS_LED_BIT2			(1 << 2)	/* LED[2] */
 #define	STATUS_LED_STATE2		STATUS_LED_OFF
-#define	STATUS_LED_PERIOD2		(CFG_HZ / 2)	/* ca. 1 Hz */
+#define	STATUS_LED_PERIOD2		(CONFIG_SYS_HZ / 2)	/* ca. 1 Hz */
 #define	STATUS_LED_YELLOW		2		/* info LED */
 #endif
 
 #if	(STATUS_LED_BITS > 3)
 #define	STATUS_LED_BIT3			(1 << 3)	/* LED[3] */
 #define	STATUS_LED_STATE3		STATUS_LED_OFF
-#define	STATUS_LED_PERIOD3		(CFG_HZ / 2)	/* ca. 1 Hz */
+#define	STATUS_LED_PERIOD3		(CONFIG_SYS_HZ / 2)	/* ca. 1 Hz */
 #define	STATUS_LED_GREEN		3		/* info LED */
 #endif
 
 #define	STATUS_LED_PAR			1 /* makes status_led.h happy */
 
-#endif	/* CFG_NIOS_CPU_PIO_NUMS */
+#endif	/* CONFIG_SYS_NIOS_CPU_PIO_NUMS */
 
 /*------------------------------------------------------------------------
  * Diagnostics / Power On Self Tests
  *----------------------------------------------------------------------*/
-#define	CONFIG_POST			CFG_POST_RTC
-#define	CFG_NIOS_POST_WORD_ADDR		(CFG_MONITOR_BASE + CFG_MONITOR_LEN)
+#define	CONFIG_POST			CONFIG_SYS_POST_RTC
+#define	CONFIG_SYS_NIOS_POST_WORD_ADDR		(CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)
 
 /*
  * BOOTP options
@@ -595,7 +595,7 @@
 #undef CONFIG_CMD_NFS
 #undef CONFIG_CMD_XIMG
 
-#if (CFG_NIOS_CPU_SPI_NUMS == 1)
+#if (CONFIG_SYS_NIOS_CPU_SPI_NUMS == 1)
 #define CONFIG_CMD_DATE
 #define CONFIG_CMD_SPI
 #endif
@@ -610,62 +610,62 @@
 /*------------------------------------------------------------------------
  * MISC
  *----------------------------------------------------------------------*/
-#define	CFG_LONGHELP			    /* undef to save memory	*/
-#define	CFG_HUSH_PARSER		1	    /* use "hush" command parser
+#define	CONFIG_SYS_LONGHELP			    /* undef to save memory	*/
+#define	CONFIG_SYS_HUSH_PARSER		1	    /* use "hush" command parser
 					       undef to save memory	*/
-#define	CFG_PROMPT		"ADNPESC1 > " /* Monitor Command Prompt	*/
-#define	CFG_CBSIZE		1024	    /* Console I/O Buffer Size	*/
-#define	CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define	CFG_MAXARGS		64	    /* max number of command args*/
-#define CFG_BARGSIZE		CFG_CBSIZE  /* Boot Argument Buffer Size */
+#define	CONFIG_SYS_PROMPT		"ADNPESC1 > " /* Monitor Command Prompt	*/
+#define	CONFIG_SYS_CBSIZE		1024	    /* Console I/O Buffer Size	*/
+#define	CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define	CONFIG_SYS_MAXARGS		64	    /* max number of command args*/
+#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE  /* Boot Argument Buffer Size */
 
-#ifdef	CFG_HUSH_PARSER
-#define CFG_PROMPT_HUSH_PS2	"[]> "
+#ifdef	CONFIG_SYS_HUSH_PARSER
+#define CONFIG_SYS_PROMPT_HUSH_PS2	"[]> "
 #endif
 
 /* Default load address	*/
-#if	(CFG_SRAM_SIZE != 0)
+#if	(CONFIG_SYS_SRAM_SIZE != 0)
 
 /* default in SRAM */
-#define	CFG_LOAD_ADDR		CFG_SRAM_BASE
+#define	CONFIG_SYS_LOAD_ADDR		CONFIG_SYS_SRAM_BASE
 
-#elif	(CFG_SDRAM_SIZE != 0)
+#elif	(CONFIG_SYS_SDRAM_SIZE != 0)
 
 /* default in SDRAM */
-#if	(CFG_SDRAM_BASE == CFG_NIOS_CPU_VEC_BASE)
+#if	(CONFIG_SYS_SDRAM_BASE == CONFIG_SYS_NIOS_CPU_VEC_BASE)
 #if 1
-#define	CFG_LOAD_ADDR		(CFG_SDRAM_BASE + CFG_NIOS_CPU_VEC_SIZE)
+#define	CONFIG_SYS_LOAD_ADDR		(CONFIG_SYS_SDRAM_BASE + CONFIG_SYS_NIOS_CPU_VEC_SIZE)
 #else
-#define	CFG_LOAD_ADDR		(CFG_SDRAM_BASE + 0x400000)
+#define	CONFIG_SYS_LOAD_ADDR		(CONFIG_SYS_SDRAM_BASE + 0x400000)
 #endif
 #else
-#define	CFG_LOAD_ADDR		CFG_SDRAM_BASE
+#define	CONFIG_SYS_LOAD_ADDR		CONFIG_SYS_SDRAM_BASE
 #endif
 
 #else
-#undef	CFG_LOAD_ADDR		/* force error break */
+#undef	CONFIG_SYS_LOAD_ADDR		/* force error break */
 #endif
 
 /* MEM test area */
-#if	(CFG_SDRAM_SIZE != 0)
+#if	(CONFIG_SYS_SDRAM_SIZE != 0)
 
 /* SDRAM begin to stack area (1MB stack) */
-#if	(CFG_SDRAM_BASE == CFG_NIOS_CPU_VEC_BASE)
+#if	(CONFIG_SYS_SDRAM_BASE == CONFIG_SYS_NIOS_CPU_VEC_BASE)
 #if 0
-#define	CFG_MEMTEST_START	(CFG_SDRAM_BASE + CFG_NIOS_CPU_VEC_SIZE)
+#define	CONFIG_SYS_MEMTEST_START	(CONFIG_SYS_SDRAM_BASE + CONFIG_SYS_NIOS_CPU_VEC_SIZE)
 #else
-#define	CFG_MEMTEST_START	(CFG_SDRAM_BASE + 0x400000)
+#define	CONFIG_SYS_MEMTEST_START	(CONFIG_SYS_SDRAM_BASE + 0x400000)
 #endif
 #else
-#define	CFG_MEMTEST_START	CFG_SDRAM_BASE
+#define	CONFIG_SYS_MEMTEST_START	CONFIG_SYS_SDRAM_BASE
 #endif
 
-#define	CFG_MEMTEST_END		(CFG_INIT_SP - (1024 * 1024))
-#define	CFG_MEMTEST_END		(CFG_INIT_SP - (1024 * 1024))
+#define	CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_INIT_SP - (1024 * 1024))
+#define	CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_INIT_SP - (1024 * 1024))
 
 #else
-#undef	CFG_MEMTEST_START	/* force error break */
-#undef	CFG_MEMTEST_END
+#undef	CONFIG_SYS_MEMTEST_START	/* force error break */
+#undef	CONFIG_SYS_MEMTEST_END
 #endif
 
 /*
diff --git a/include/configs/ADNPESC1_base_32.h b/include/configs/ADNPESC1_base_32.h
index c8428b4e7..1fe8d095b 100644
--- a/include/configs/ADNPESC1_base_32.h
+++ b/include/configs/ADNPESC1_base_32.h
@@ -30,402 +30,402 @@
  * Here we must define CPU dependencies. Any unsupported option have to
  * be undefined or defined with zero, example CPU without data cache / OCI:
  *
- *	#define	CFG_NIOS_CPU_ICACHE	4096
- *	#define	CFG_NIOS_CPU_DCACHE	0
- *	#undef	CFG_NIOS_CPU_OCI_BASE
- *	#undef	CFG_NIOS_CPU_OCI_SIZE
+ *	#define	CONFIG_SYS_NIOS_CPU_ICACHE	4096
+ *	#define	CONFIG_SYS_NIOS_CPU_DCACHE	0
+ *	#undef	CONFIG_SYS_NIOS_CPU_OCI_BASE
+ *	#undef	CONFIG_SYS_NIOS_CPU_OCI_SIZE
  */
 
 /* CPU core */
-#define	CFG_NIOS_CPU_CLK	50000000	/* NIOS CPU clock	*/
-#define	CFG_NIOS_CPU_ICACHE	(0)		/* instruction cache	*/
-#define	CFG_NIOS_CPU_DCACHE	(0)		/* data cache		*/
-#define	CFG_NIOS_CPU_REG_NUMS	512		/* number of register	*/
-#define	CFG_NIOS_CPU_MUL	0		/* 16x16 MUL:	no(0)	*/
+#define	CONFIG_SYS_NIOS_CPU_CLK	50000000	/* NIOS CPU clock	*/
+#define	CONFIG_SYS_NIOS_CPU_ICACHE	(0)		/* instruction cache	*/
+#define	CONFIG_SYS_NIOS_CPU_DCACHE	(0)		/* data cache		*/
+#define	CONFIG_SYS_NIOS_CPU_REG_NUMS	512		/* number of register	*/
+#define	CONFIG_SYS_NIOS_CPU_MUL	0		/* 16x16 MUL:	no(0)	*/
 						/*		yes(1)	*/
-#define	CFG_NIOS_CPU_MSTEP	1		/* 16x16 MSTEP:	no(0)	*/
+#define	CONFIG_SYS_NIOS_CPU_MSTEP	1		/* 16x16 MSTEP:	no(0)	*/
 						/*		yes(1)	*/
-#define	CFG_NIOS_CPU_STACK	0x03000000	/* stack top	addr	*/
-#define	CFG_NIOS_CPU_VEC_BASE	0x02000000	/* IRQ vectors	addr	*/
-#define	CFG_NIOS_CPU_VEC_SIZE	256		/*		size	*/
-#define	CFG_NIOS_CPU_VEC_NUMS	64		/*		numbers	*/
-#define	CFG_NIOS_CPU_RST_VECT	0x00000000	/* RESET vector	addr	*/
-#define	CFG_NIOS_CPU_DBG_CORE	0		/* CPU debug:	no(0)	*/
+#define	CONFIG_SYS_NIOS_CPU_STACK	0x03000000	/* stack top	addr	*/
+#define	CONFIG_SYS_NIOS_CPU_VEC_BASE	0x02000000	/* IRQ vectors	addr	*/
+#define	CONFIG_SYS_NIOS_CPU_VEC_SIZE	256		/*		size	*/
+#define	CONFIG_SYS_NIOS_CPU_VEC_NUMS	64		/*		numbers	*/
+#define	CONFIG_SYS_NIOS_CPU_RST_VECT	0x00000000	/* RESET vector	addr	*/
+#define	CONFIG_SYS_NIOS_CPU_DBG_CORE	0		/* CPU debug:	no(0)	*/
 						/*		yes(1)	*/
 
 /* The offset address in flash to check for the Nios signature "Ni".
  * (see GM_FlashExec in germs_monitor.s) */
-#define	CFG_NIOS_CPU_EXES_OFFS	0x0C
+#define	CONFIG_SYS_NIOS_CPU_EXES_OFFS	0x0C
 
 /* on-chip extensions */
-#undef	CFG_NIOS_CPU_RAM_BASE			/* on chip RAM	addr	*/
-#undef	CFG_NIOS_CPU_RAM_SIZE			/* 64 KB	size	*/
+#undef	CONFIG_SYS_NIOS_CPU_RAM_BASE			/* on chip RAM	addr	*/
+#undef	CONFIG_SYS_NIOS_CPU_RAM_SIZE			/* 64 KB	size	*/
 
-#define	CFG_NIOS_CPU_ROM_BASE	0x00000000	/* on chip ROM	addr	*/
-#define	CFG_NIOS_CPU_ROM_SIZE	(2 * 1024)	/*  2 KB	size	*/
+#define	CONFIG_SYS_NIOS_CPU_ROM_BASE	0x00000000	/* on chip ROM	addr	*/
+#define	CONFIG_SYS_NIOS_CPU_ROM_SIZE	(2 * 1024)	/*  2 KB	size	*/
 
-#undef	CFG_NIOS_CPU_OCI_BASE			/* OCI core	addr	*/
-#undef	CFG_NIOS_CPU_OCI_SIZE			/*		size	*/
+#undef	CONFIG_SYS_NIOS_CPU_OCI_BASE			/* OCI core	addr	*/
+#undef	CONFIG_SYS_NIOS_CPU_OCI_SIZE			/*		size	*/
 
 /* timer */
-#define	CFG_NIOS_CPU_TIMER_NUMS	1		/* number of timer	*/
+#define	CONFIG_SYS_NIOS_CPU_TIMER_NUMS	1		/* number of timer	*/
 
-#define	CFG_NIOS_CPU_TIMER0	0x00000840	/* TIMER0	addr	*/
-#define	CFG_NIOS_CPU_TIMER0_IRQ	16		/*		IRQ	*/
-#define	CFG_NIOS_CPU_TIMER0_PER	1000		/*  periode	usec	*/
-#define	CFG_NIOS_CPU_TIMER0_AR	0		/*  always run:	no(0)	*/
+#define	CONFIG_SYS_NIOS_CPU_TIMER0	0x00000840	/* TIMER0	addr	*/
+#define	CONFIG_SYS_NIOS_CPU_TIMER0_IRQ	16		/*		IRQ	*/
+#define	CONFIG_SYS_NIOS_CPU_TIMER0_PER	1000		/*  periode	usec	*/
+#define	CONFIG_SYS_NIOS_CPU_TIMER0_AR	0		/*  always run:	no(0)	*/
 						/*		yes(1)	*/
-#define	CFG_NIOS_CPU_TIMER0_FP	0		/*  fixed per:	no(0)	*/
+#define	CONFIG_SYS_NIOS_CPU_TIMER0_FP	0		/*  fixed per:	no(0)	*/
 						/*		yes(1)	*/
-#define	CFG_NIOS_CPU_TIMER0_SS	1		/*  snaphot:	no(0)	*/
+#define	CONFIG_SYS_NIOS_CPU_TIMER0_SS	1		/*  snaphot:	no(0)	*/
 						/*		yes(1)	*/
 
 /* serial i/o */
-#define	CFG_NIOS_CPU_UART_NUMS	2		/* number of uarts	*/
-
-#define	CFG_NIOS_CPU_UART0	0x00000800	/* UART0	addr	*/
-#define	CFG_NIOS_CPU_UART0_IRQ	17		/*		IRQ	*/
-#define	CFG_NIOS_CPU_UART0_BR	115200		/*  baudrate	var(0)	*/
-#define	CFG_NIOS_CPU_UART0_DB	8		/*  data bit		*/
-#define	CFG_NIOS_CPU_UART0_SB	1		/*  stop bit		*/
-#define	CFG_NIOS_CPU_UART0_PA	0		/*  parity	none(0)	*/
+#define	CONFIG_SYS_NIOS_CPU_UART_NUMS	2		/* number of uarts	*/
+
+#define	CONFIG_SYS_NIOS_CPU_UART0	0x00000800	/* UART0	addr	*/
+#define	CONFIG_SYS_NIOS_CPU_UART0_IRQ	17		/*		IRQ	*/
+#define	CONFIG_SYS_NIOS_CPU_UART0_BR	115200		/*  baudrate	var(0)	*/
+#define	CONFIG_SYS_NIOS_CPU_UART0_DB	8		/*  data bit		*/
+#define	CONFIG_SYS_NIOS_CPU_UART0_SB	1		/*  stop bit		*/
+#define	CONFIG_SYS_NIOS_CPU_UART0_PA	0		/*  parity	none(0)	*/
 						/*		odd(1)	*/
 						/*		even(2)	*/
-#define	CFG_NIOS_CPU_UART0_HS	1		/*  handshake:	no(0)	*/
+#define	CONFIG_SYS_NIOS_CPU_UART0_HS	1		/*  handshake:	no(0)	*/
 						/*		crts(1)	*/
-#define	CFG_NIOS_CPU_UART0_EOP	0		/*  eop reg:	no(0)	*/
+#define	CONFIG_SYS_NIOS_CPU_UART0_EOP	0		/*  eop reg:	no(0)	*/
 						/*		yes(1)	*/
 
-#define	CFG_NIOS_CPU_UART1	0x00000820	/* UART1	addr	*/
-#define	CFG_NIOS_CPU_UART1_IRQ	18		/*		IRQ	*/
-#define	CFG_NIOS_CPU_UART1_BR	115200		/*  baudrate	var(0)	*/
-#define	CFG_NIOS_CPU_UART1_DB	8		/*  data bit		*/
-#define	CFG_NIOS_CPU_UART1_SB	1		/*  stop bit		*/
-#define	CFG_NIOS_CPU_UART1_PA	0		/*  parity	none(0)	*/
+#define	CONFIG_SYS_NIOS_CPU_UART1	0x00000820	/* UART1	addr	*/
+#define	CONFIG_SYS_NIOS_CPU_UART1_IRQ	18		/*		IRQ	*/
+#define	CONFIG_SYS_NIOS_CPU_UART1_BR	115200		/*  baudrate	var(0)	*/
+#define	CONFIG_SYS_NIOS_CPU_UART1_DB	8		/*  data bit		*/
+#define	CONFIG_SYS_NIOS_CPU_UART1_SB	1		/*  stop bit		*/
+#define	CONFIG_SYS_NIOS_CPU_UART1_PA	0		/*  parity	none(0)	*/
 						/*		odd(1)	*/
 						/*		even(2)	*/
-#define	CFG_NIOS_CPU_UART1_HS	0		/*  handshake:	no(0)	*/
+#define	CONFIG_SYS_NIOS_CPU_UART1_HS	0		/*  handshake:	no(0)	*/
 						/*		crts(1)	*/
-#define	CFG_NIOS_CPU_UART1_EOP	0		/*  eop reg:	no(0)	*/
+#define	CONFIG_SYS_NIOS_CPU_UART1_EOP	0		/*  eop reg:	no(0)	*/
 						/*		yes(1)	*/
 
 /* serial peripheral i/o */
-#define	CFG_NIOS_CPU_SPI_NUMS	1		/* number of spis	*/
+#define	CONFIG_SYS_NIOS_CPU_SPI_NUMS	1		/* number of spis	*/
 
-#define	CFG_NIOS_CPU_SPI0	0x000008c0	/* SPI0		addr	*/
-#define	CFG_NIOS_CPU_SPI0_IRQ	25		/*		IRQ	*/
-#define	CFG_NIOS_CPU_SPI0_BITS	16		/*  data bit		*/
-#define	CFG_NIOS_CPU_SPI0_MA	1		/*  is master:	no(0)	*/
+#define	CONFIG_SYS_NIOS_CPU_SPI0	0x000008c0	/* SPI0		addr	*/
+#define	CONFIG_SYS_NIOS_CPU_SPI0_IRQ	25		/*		IRQ	*/
+#define	CONFIG_SYS_NIOS_CPU_SPI0_BITS	16		/*  data bit		*/
+#define	CONFIG_SYS_NIOS_CPU_SPI0_MA	1		/*  is master:	no(0)	*/
 						/*		yes(1)	*/
-#define	CFG_NIOS_CPU_SPI0_SLN	1		/*  num slaves		*/
-#define	CFG_NIOS_CPU_SPI0_TCLK	250000		/*  clock (Hz)		*/
-#define	CFG_NIOS_CPU_SPI0_TDELAY 2		/*  delay (usec)	*/
-#define	CFG_NIOS_CPU_SPI0_FB	0		/*  first bit	msb(0)	*/
+#define	CONFIG_SYS_NIOS_CPU_SPI0_SLN	1		/*  num slaves		*/
+#define	CONFIG_SYS_NIOS_CPU_SPI0_TCLK	250000		/*  clock (Hz)		*/
+#define	CONFIG_SYS_NIOS_CPU_SPI0_TDELAY 2		/*  delay (usec)	*/
+#define	CONFIG_SYS_NIOS_CPU_SPI0_FB	0		/*  first bit	msb(0)	*/
 						/*		lsb(1)	*/
 
 /* parallel i/o */
-#define	CFG_NIOS_CPU_PIO_NUMS	14		/* number of parports	*/
+#define	CONFIG_SYS_NIOS_CPU_PIO_NUMS	14		/* number of parports	*/
 
-#define	CFG_NIOS_CPU_PIO0	0x00000860	/* PIO0		addr	*/
-#undef	CFG_NIOS_CPU_PIO0_IRQ			/*		w/o IRQ	*/
-#define	CFG_NIOS_CPU_PIO0_BITS	8		/*  number  of  bits	*/
-#define	CFG_NIOS_CPU_PIO0_TYPE	0		/*  io type:	tris(0)	*/
+#define	CONFIG_SYS_NIOS_CPU_PIO0	0x00000860	/* PIO0		addr	*/
+#undef	CONFIG_SYS_NIOS_CPU_PIO0_IRQ			/*		w/o IRQ	*/
+#define	CONFIG_SYS_NIOS_CPU_PIO0_BITS	8		/*  number  of  bits	*/
+#define	CONFIG_SYS_NIOS_CPU_PIO0_TYPE	0		/*  io type:	tris(0)	*/
 						/*		out(1)	*/
 						/*		in(2)	*/
-#define	CFG_NIOS_CPU_PIO0_CAP	0		/*  capture:	no(0)	*/
+#define	CONFIG_SYS_NIOS_CPU_PIO0_CAP	0		/*  capture:	no(0)	*/
 						/*		yes(1)	*/
-#define	CFG_NIOS_CPU_PIO0_EDGE	0		/*  edge type:	none(0)	*/
+#define	CONFIG_SYS_NIOS_CPU_PIO0_EDGE	0		/*  edge type:	none(0)	*/
 						/*		fall(1)	*/
 						/*		rise(2)	*/
 						/*		any(3)	*/
-#define	CFG_NIOS_CPU_PIO0_ITYPE	0		/*  IRQ type:	none(0)	*/
+#define	CONFIG_SYS_NIOS_CPU_PIO0_ITYPE	0		/*  IRQ type:	none(0)	*/
 						/*		level(1)*/
 						/*		edge(2)	*/
 
-#define	CFG_NIOS_CPU_PIO1	0x00000870	/* PIO1		addr	*/
-#undef	CFG_NIOS_CPU_PIO1_IRQ			/*		w/o IRQ	*/
-#define	CFG_NIOS_CPU_PIO1_BITS	8		/*  number  of  bits	*/
-#define	CFG_NIOS_CPU_PIO1_TYPE	0		/*  io type:	tris(0)	*/
+#define	CONFIG_SYS_NIOS_CPU_PIO1	0x00000870	/* PIO1		addr	*/
+#undef	CONFIG_SYS_NIOS_CPU_PIO1_IRQ			/*		w/o IRQ	*/
+#define	CONFIG_SYS_NIOS_CPU_PIO1_BITS	8		/*  number  of  bits	*/
+#define	CONFIG_SYS_NIOS_CPU_PIO1_TYPE	0		/*  io type:	tris(0)	*/
 						/*		out(1)	*/
 						/*		in(2)	*/
-#define	CFG_NIOS_CPU_PIO1_CAP	0		/*  capture:	no(0)	*/
+#define	CONFIG_SYS_NIOS_CPU_PIO1_CAP	0		/*  capture:	no(0)	*/
 						/*		yes(1)	*/
-#define	CFG_NIOS_CPU_PIO1_EDGE	0		/*  edge type:	none(0)	*/
+#define	CONFIG_SYS_NIOS_CPU_PIO1_EDGE	0		/*  edge type:	none(0)	*/
 						/*		fall(1)	*/
 						/*		rise(2)	*/
 						/*		any(3)	*/
-#define	CFG_NIOS_CPU_PIO1_ITYPE	0		/*  IRQ type:	none(0)	*/
+#define	CONFIG_SYS_NIOS_CPU_PIO1_ITYPE	0		/*  IRQ type:	none(0)	*/
 						/*		level(1)*/
 						/*		edge(2)	*/
 
-#define	CFG_NIOS_CPU_PIO2	0x00000880	/* PIO2		addr	*/
-#undef	CFG_NIOS_CPU_PIO2_IRQ			/*		w/o IRQ	*/
-#define	CFG_NIOS_CPU_PIO2_BITS	4		/*  number  of  bits	*/
-#define	CFG_NIOS_CPU_PIO2_TYPE	0		/*  io type:	tris(0)	*/
+#define	CONFIG_SYS_NIOS_CPU_PIO2	0x00000880	/* PIO2		addr	*/
+#undef	CONFIG_SYS_NIOS_CPU_PIO2_IRQ			/*		w/o IRQ	*/
+#define	CONFIG_SYS_NIOS_CPU_PIO2_BITS	4		/*  number  of  bits	*/
+#define	CONFIG_SYS_NIOS_CPU_PIO2_TYPE	0		/*  io type:	tris(0)	*/
 						/*		out(1)	*/
 						/*		in(2)	*/
-#define	CFG_NIOS_CPU_PIO2_CAP	0		/*  capture:	no(0)	*/
+#define	CONFIG_SYS_NIOS_CPU_PIO2_CAP	0		/*  capture:	no(0)	*/
 						/*		yes(1)	*/
-#define	CFG_NIOS_CPU_PIO2_EDGE	0		/*  edge type:	none(0)	*/
+#define	CONFIG_SYS_NIOS_CPU_PIO2_EDGE	0		/*  edge type:	none(0)	*/
 						/*		fall(1)	*/
 						/*		rise(2)	*/
 						/*		any(3)	*/
-#define	CFG_NIOS_CPU_PIO2_ITYPE	0		/*  IRQ type:	none(0)	*/
+#define	CONFIG_SYS_NIOS_CPU_PIO2_ITYPE	0		/*  IRQ type:	none(0)	*/
 						/*		level(1)*/
 						/*		edge(2)	*/
 
-#define	CFG_NIOS_CPU_PIO3	0x00000890	/* PIO3		addr	*/
-#undef	CFG_NIOS_CPU_PIO3_IRQ			/*		w/o IRQ	*/
-#define	CFG_NIOS_CPU_PIO3_BITS	1		/*  number  of  bits	*/
-#define	CFG_NIOS_CPU_PIO3_TYPE	2		/*  io type:	tris(0)	*/
+#define	CONFIG_SYS_NIOS_CPU_PIO3	0x00000890	/* PIO3		addr	*/
+#undef	CONFIG_SYS_NIOS_CPU_PIO3_IRQ			/*		w/o IRQ	*/
+#define	CONFIG_SYS_NIOS_CPU_PIO3_BITS	1		/*  number  of  bits	*/
+#define	CONFIG_SYS_NIOS_CPU_PIO3_TYPE	2		/*  io type:	tris(0)	*/
 						/*		out(1)	*/
 						/*		in(2)	*/
-#define	CFG_NIOS_CPU_PIO3_CAP	0		/*  capture:	no(0)	*/
+#define	CONFIG_SYS_NIOS_CPU_PIO3_CAP	0		/*  capture:	no(0)	*/
 						/*		yes(1)	*/
-#define	CFG_NIOS_CPU_PIO3_EDGE	0		/*  edge type:	none(0)	*/
+#define	CONFIG_SYS_NIOS_CPU_PIO3_EDGE	0		/*  edge type:	none(0)	*/
 						/*		fall(1)	*/
 						/*		rise(2)	*/
 						/*		any(3)	*/
-#define	CFG_NIOS_CPU_PIO3_ITYPE	0		/*  IRQ type:	none(0)	*/
+#define	CONFIG_SYS_NIOS_CPU_PIO3_ITYPE	0		/*  IRQ type:	none(0)	*/
 						/*		level(1)*/
 						/*		edge(2)	*/
 
-#define	CFG_NIOS_CPU_PIO3	0x00000890	/* PIO3		addr	*/
-#undef	CFG_NIOS_CPU_PIO3_IRQ			/*		w/o IRQ	*/
-#define	CFG_NIOS_CPU_PIO3_BITS	1		/*  number  of  bits	*/
-#define	CFG_NIOS_CPU_PIO3_TYPE	2		/*  io type:	tris(0)	*/
+#define	CONFIG_SYS_NIOS_CPU_PIO3	0x00000890	/* PIO3		addr	*/
+#undef	CONFIG_SYS_NIOS_CPU_PIO3_IRQ			/*		w/o IRQ	*/
+#define	CONFIG_SYS_NIOS_CPU_PIO3_BITS	1		/*  number  of  bits	*/
+#define	CONFIG_SYS_NIOS_CPU_PIO3_TYPE	2		/*  io type:	tris(0)	*/
 						/*		out(1)	*/
 						/*		in(2)	*/
-#define	CFG_NIOS_CPU_PIO3_CAP	0		/*  capture:	no(0)	*/
+#define	CONFIG_SYS_NIOS_CPU_PIO3_CAP	0		/*  capture:	no(0)	*/
 						/*		yes(1)	*/
-#define	CFG_NIOS_CPU_PIO3_EDGE	0		/*  edge type:	none(0)	*/
+#define	CONFIG_SYS_NIOS_CPU_PIO3_EDGE	0		/*  edge type:	none(0)	*/
 						/*		fall(1)	*/
 						/*		rise(2)	*/
 						/*		any(3)	*/
-#define	CFG_NIOS_CPU_PIO3_ITYPE	0		/*  IRQ type:	none(0)	*/
+#define	CONFIG_SYS_NIOS_CPU_PIO3_ITYPE	0		/*  IRQ type:	none(0)	*/
 						/*		level(1)*/
 						/*		edge(2)	*/
 
-#define	CFG_NIOS_CPU_PIO4	0x000008a0	/* PIO4		addr	*/
-#undef	CFG_NIOS_CPU_PIO4_IRQ			/*		w/o IRQ	*/
-#define	CFG_NIOS_CPU_PIO4_BITS	1		/*  number  of  bits	*/
-#define	CFG_NIOS_CPU_PIO4_TYPE	1		/*  io type:	tris(0)	*/
+#define	CONFIG_SYS_NIOS_CPU_PIO4	0x000008a0	/* PIO4		addr	*/
+#undef	CONFIG_SYS_NIOS_CPU_PIO4_IRQ			/*		w/o IRQ	*/
+#define	CONFIG_SYS_NIOS_CPU_PIO4_BITS	1		/*  number  of  bits	*/
+#define	CONFIG_SYS_NIOS_CPU_PIO4_TYPE	1		/*  io type:	tris(0)	*/
 						/*		out(1)	*/
 						/*		in(2)	*/
-#define	CFG_NIOS_CPU_PIO4_CAP	0		/*  capture:	no(0)	*/
+#define	CONFIG_SYS_NIOS_CPU_PIO4_CAP	0		/*  capture:	no(0)	*/
 						/*		yes(1)	*/
-#define	CFG_NIOS_CPU_PIO4_EDGE	0		/*  edge type:	none(0)	*/
+#define	CONFIG_SYS_NIOS_CPU_PIO4_EDGE	0		/*  edge type:	none(0)	*/
 						/*		fall(1)	*/
 						/*		rise(2)	*/
 						/*		any(3)	*/
-#define	CFG_NIOS_CPU_PIO4_ITYPE	0		/*  IRQ type:	none(0)	*/
+#define	CONFIG_SYS_NIOS_CPU_PIO4_ITYPE	0		/*  IRQ type:	none(0)	*/
 						/*		level(1)*/
 						/*		edge(2)	*/
 
-#define	CFG_NIOS_CPU_PIO5	0x000008b0	/* PIO5		addr	*/
-#undef	CFG_NIOS_CPU_PIO5_IRQ			/*		w/o IRQ	*/
-#define	CFG_NIOS_CPU_PIO5_BITS	1		/*  number  of  bits	*/
-#define	CFG_NIOS_CPU_PIO5_TYPE	1		/*  io type:	tris(0)	*/
+#define	CONFIG_SYS_NIOS_CPU_PIO5	0x000008b0	/* PIO5		addr	*/
+#undef	CONFIG_SYS_NIOS_CPU_PIO5_IRQ			/*		w/o IRQ	*/
+#define	CONFIG_SYS_NIOS_CPU_PIO5_BITS	1		/*  number  of  bits	*/
+#define	CONFIG_SYS_NIOS_CPU_PIO5_TYPE	1		/*  io type:	tris(0)	*/
 						/*		out(1)	*/
 						/*		in(2)	*/
-#define	CFG_NIOS_CPU_PIO5_CAP	0		/*  capture:	no(0)	*/
+#define	CONFIG_SYS_NIOS_CPU_PIO5_CAP	0		/*  capture:	no(0)	*/
 						/*		yes(1)	*/
-#define	CFG_NIOS_CPU_PIO5_EDGE	0		/*  edge type:	none(0)	*/
+#define	CONFIG_SYS_NIOS_CPU_PIO5_EDGE	0		/*  edge type:	none(0)	*/
 						/*		fall(1)	*/
 						/*		rise(2)	*/
 						/*		any(3)	*/
-#define	CFG_NIOS_CPU_PIO5_ITYPE	0		/*  IRQ type:	none(0)	*/
+#define	CONFIG_SYS_NIOS_CPU_PIO5_ITYPE	0		/*  IRQ type:	none(0)	*/
 						/*		level(1)*/
 						/*		edge(2)	*/
 
-#define	CFG_NIOS_CPU_PIO6	0x00000900	/* PIO6		addr	*/
-#define	CFG_NIOS_CPU_PIO6_IRQ	20		/*		IRQ	*/
-#define	CFG_NIOS_CPU_PIO6_BITS	1		/*  number  of  bits	*/
-#define	CFG_NIOS_CPU_PIO6_TYPE	2		/*  io type:	tris(0)	*/
+#define	CONFIG_SYS_NIOS_CPU_PIO6	0x00000900	/* PIO6		addr	*/
+#define	CONFIG_SYS_NIOS_CPU_PIO6_IRQ	20		/*		IRQ	*/
+#define	CONFIG_SYS_NIOS_CPU_PIO6_BITS	1		/*  number  of  bits	*/
+#define	CONFIG_SYS_NIOS_CPU_PIO6_TYPE	2		/*  io type:	tris(0)	*/
 						/*		out(1)	*/
 						/*		in(2)	*/
-#define	CFG_NIOS_CPU_PIO6_CAP	1		/*  capture:	no(0)	*/
+#define	CONFIG_SYS_NIOS_CPU_PIO6_CAP	1		/*  capture:	no(0)	*/
 						/*		yes(1)	*/
-#define	CFG_NIOS_CPU_PIO6_EDGE	2		/*  edge type:	none(0)	*/
+#define	CONFIG_SYS_NIOS_CPU_PIO6_EDGE	2		/*  edge type:	none(0)	*/
 						/*		fall(1)	*/
 						/*		rise(2)	*/
 						/*		any(3)	*/
-#define	CFG_NIOS_CPU_PIO6_ITYPE	1		/*  IRQ type:	none(0)	*/
+#define	CONFIG_SYS_NIOS_CPU_PIO6_ITYPE	1		/*  IRQ type:	none(0)	*/
 						/*		level(1)*/
 						/*		edge(2)	*/
 
-#define	CFG_NIOS_CPU_PIO7	0x00000910	/* PIO7		addr	*/
-#define	CFG_NIOS_CPU_PIO7_IRQ	31		/*		IRQ	*/
-#define	CFG_NIOS_CPU_PIO7_BITS	1		/*  number  of  bits	*/
-#define	CFG_NIOS_CPU_PIO7_TYPE	2		/*  io type:	tris(0)	*/
+#define	CONFIG_SYS_NIOS_CPU_PIO7	0x00000910	/* PIO7		addr	*/
+#define	CONFIG_SYS_NIOS_CPU_PIO7_IRQ	31		/*		IRQ	*/
+#define	CONFIG_SYS_NIOS_CPU_PIO7_BITS	1		/*  number  of  bits	*/
+#define	CONFIG_SYS_NIOS_CPU_PIO7_TYPE	2		/*  io type:	tris(0)	*/
 						/*		out(1)	*/
 						/*		in(2)	*/
-#define	CFG_NIOS_CPU_PIO7_CAP	1		/*  capture:	no(0)	*/
+#define	CONFIG_SYS_NIOS_CPU_PIO7_CAP	1		/*  capture:	no(0)	*/
 						/*		yes(1)	*/
-#define	CFG_NIOS_CPU_PIO7_EDGE	2		/*  edge type:	none(0)	*/
+#define	CONFIG_SYS_NIOS_CPU_PIO7_EDGE	2		/*  edge type:	none(0)	*/
 						/*		fall(1)	*/
 						/*		rise(2)	*/
 						/*		any(3)	*/
-#define	CFG_NIOS_CPU_PIO7_ITYPE	1		/*  IRQ type:	none(0)	*/
+#define	CONFIG_SYS_NIOS_CPU_PIO7_ITYPE	1		/*  IRQ type:	none(0)	*/
 						/*		level(1)*/
 						/*		edge(2)	*/
 
-#define	CFG_NIOS_CPU_PIO8	0x00000920	/* PIO8		addr	*/
-#define	CFG_NIOS_CPU_PIO8_IRQ	32		/*		IRQ	*/
-#define	CFG_NIOS_CPU_PIO8_BITS	1		/*  number  of  bits	*/
-#define	CFG_NIOS_CPU_PIO8_TYPE	2		/*  io type:	tris(0)	*/
+#define	CONFIG_SYS_NIOS_CPU_PIO8	0x00000920	/* PIO8		addr	*/
+#define	CONFIG_SYS_NIOS_CPU_PIO8_IRQ	32		/*		IRQ	*/
+#define	CONFIG_SYS_NIOS_CPU_PIO8_BITS	1		/*  number  of  bits	*/
+#define	CONFIG_SYS_NIOS_CPU_PIO8_TYPE	2		/*  io type:	tris(0)	*/
 						/*		out(1)	*/
 						/*		in(2)	*/
-#define	CFG_NIOS_CPU_PIO8_CAP	1		/*  capture:	no(0)	*/
+#define	CONFIG_SYS_NIOS_CPU_PIO8_CAP	1		/*  capture:	no(0)	*/
 						/*		yes(1)	*/
-#define	CFG_NIOS_CPU_PIO8_EDGE	2		/*  edge type:	none(0)	*/
+#define	CONFIG_SYS_NIOS_CPU_PIO8_EDGE	2		/*  edge type:	none(0)	*/
 						/*		fall(1)	*/
 						/*		rise(2)	*/
 						/*		any(3)	*/
-#define	CFG_NIOS_CPU_PIO8_ITYPE	1		/*  IRQ type:	none(0)	*/
+#define	CONFIG_SYS_NIOS_CPU_PIO8_ITYPE	1		/*  IRQ type:	none(0)	*/
 						/*		level(1)*/
 						/*		edge(2)	*/
 
-#define	CFG_NIOS_CPU_PIO9	0x00000930	/* PIO9		addr	*/
-#define	CFG_NIOS_CPU_PIO9_IRQ	33		/*		IRQ	*/
-#define	CFG_NIOS_CPU_PIO9_BITS	1		/*  number  of  bits	*/
-#define	CFG_NIOS_CPU_PIO9_TYPE	2		/*  io type:	tris(0)	*/
+#define	CONFIG_SYS_NIOS_CPU_PIO9	0x00000930	/* PIO9		addr	*/
+#define	CONFIG_SYS_NIOS_CPU_PIO9_IRQ	33		/*		IRQ	*/
+#define	CONFIG_SYS_NIOS_CPU_PIO9_BITS	1		/*  number  of  bits	*/
+#define	CONFIG_SYS_NIOS_CPU_PIO9_TYPE	2		/*  io type:	tris(0)	*/
 						/*		out(1)	*/
 						/*		in(2)	*/
-#define	CFG_NIOS_CPU_PIO9_CAP	1		/*  capture:	no(0)	*/
+#define	CONFIG_SYS_NIOS_CPU_PIO9_CAP	1		/*  capture:	no(0)	*/
 						/*		yes(1)	*/
-#define	CFG_NIOS_CPU_PIO9_EDGE	2		/*  edge type:	none(0)	*/
+#define	CONFIG_SYS_NIOS_CPU_PIO9_EDGE	2		/*  edge type:	none(0)	*/
 						/*		fall(1)	*/
 						/*		rise(2)	*/
 						/*		any(3)	*/
-#define	CFG_NIOS_CPU_PIO9_ITYPE	1		/*  IRQ type:	none(0)	*/
+#define	CONFIG_SYS_NIOS_CPU_PIO9_ITYPE	1		/*  IRQ type:	none(0)	*/
 						/*		level(1)*/
 						/*		edge(2)	*/
 
-#define	CFG_NIOS_CPU_PIO10	0x00000940	/* PIO10	addr	*/
-#define	CFG_NIOS_CPU_PIO10_IRQ	34		/*		IRQ	*/
-#define	CFG_NIOS_CPU_PIO10_BITS	1		/*  number  of  bits	*/
-#define	CFG_NIOS_CPU_PIO10_TYPE	2		/*  io type:	tris(0)	*/
+#define	CONFIG_SYS_NIOS_CPU_PIO10	0x00000940	/* PIO10	addr	*/
+#define	CONFIG_SYS_NIOS_CPU_PIO10_IRQ	34		/*		IRQ	*/
+#define	CONFIG_SYS_NIOS_CPU_PIO10_BITS	1		/*  number  of  bits	*/
+#define	CONFIG_SYS_NIOS_CPU_PIO10_TYPE	2		/*  io type:	tris(0)	*/
 						/*		out(1)	*/
 						/*		in(2)	*/
-#define	CFG_NIOS_CPU_PIO10_CAP	1		/*  capture:	no(0)	*/
+#define	CONFIG_SYS_NIOS_CPU_PIO10_CAP	1		/*  capture:	no(0)	*/
 						/*		yes(1)	*/
-#define	CFG_NIOS_CPU_PIO10_EDGE	2		/*  edge type:	none(0)	*/
+#define	CONFIG_SYS_NIOS_CPU_PIO10_EDGE	2		/*  edge type:	none(0)	*/
 						/*		fall(1)	*/
 						/*		rise(2)	*/
 						/*		any(3)	*/
-#define	CFG_NIOS_CPU_PIO10_ITYPE 1		/*  IRQ type:	none(0)	*/
+#define	CONFIG_SYS_NIOS_CPU_PIO10_ITYPE 1		/*  IRQ type:	none(0)	*/
 						/*		level(1)*/
 						/*		edge(2)	*/
 
-#define	CFG_NIOS_CPU_PIO11	0x00000950	/* PIO11	addr	*/
-#define	CFG_NIOS_CPU_PIO11_IRQ	35		/*		IRQ	*/
-#define	CFG_NIOS_CPU_PIO11_BITS	1		/*  number  of  bits	*/
-#define	CFG_NIOS_CPU_PIO11_TYPE	2		/*  io type:	tris(0)	*/
+#define	CONFIG_SYS_NIOS_CPU_PIO11	0x00000950	/* PIO11	addr	*/
+#define	CONFIG_SYS_NIOS_CPU_PIO11_IRQ	35		/*		IRQ	*/
+#define	CONFIG_SYS_NIOS_CPU_PIO11_BITS	1		/*  number  of  bits	*/
+#define	CONFIG_SYS_NIOS_CPU_PIO11_TYPE	2		/*  io type:	tris(0)	*/
 						/*		out(1)	*/
 						/*		in(2)	*/
-#define	CFG_NIOS_CPU_PIO11_CAP	1		/*  capture:	no(0)	*/
+#define	CONFIG_SYS_NIOS_CPU_PIO11_CAP	1		/*  capture:	no(0)	*/
 						/*		yes(1)	*/
-#define	CFG_NIOS_CPU_PIO11_EDGE	2		/*  edge type:	none(0)	*/
+#define	CONFIG_SYS_NIOS_CPU_PIO11_EDGE	2		/*  edge type:	none(0)	*/
 						/*		fall(1)	*/
 						/*		rise(2)	*/
 						/*		any(3)	*/
-#define	CFG_NIOS_CPU_PIO11_ITYPE 1		/*  IRQ type:	none(0)	*/
+#define	CONFIG_SYS_NIOS_CPU_PIO11_ITYPE 1		/*  IRQ type:	none(0)	*/
 						/*		level(1)*/
 						/*		edge(2)	*/
 
-#define	CFG_NIOS_CPU_PIO12	0x00000960	/* PIO12	addr	*/
-#define	CFG_NIOS_CPU_PIO12_IRQ	36		/*		IRQ	*/
-#define	CFG_NIOS_CPU_PIO12_BITS	1		/*  number  of  bits	*/
-#define	CFG_NIOS_CPU_PIO12_TYPE	2		/*  io type:	tris(0)	*/
+#define	CONFIG_SYS_NIOS_CPU_PIO12	0x00000960	/* PIO12	addr	*/
+#define	CONFIG_SYS_NIOS_CPU_PIO12_IRQ	36		/*		IRQ	*/
+#define	CONFIG_SYS_NIOS_CPU_PIO12_BITS	1		/*  number  of  bits	*/
+#define	CONFIG_SYS_NIOS_CPU_PIO12_TYPE	2		/*  io type:	tris(0)	*/
 						/*		out(1)	*/
 						/*		in(2)	*/
-#define	CFG_NIOS_CPU_PIO12_CAP	1		/*  capture:	no(0)	*/
+#define	CONFIG_SYS_NIOS_CPU_PIO12_CAP	1		/*  capture:	no(0)	*/
 						/*		yes(1)	*/
-#define	CFG_NIOS_CPU_PIO12_EDGE	2		/*  edge type:	none(0)	*/
+#define	CONFIG_SYS_NIOS_CPU_PIO12_EDGE	2		/*  edge type:	none(0)	*/
 						/*		fall(1)	*/
 						/*		rise(2)	*/
 						/*		any(3)	*/
-#define	CFG_NIOS_CPU_PIO12_ITYPE 1		/*  IRQ type:	none(0)	*/
+#define	CONFIG_SYS_NIOS_CPU_PIO12_ITYPE 1		/*  IRQ type:	none(0)	*/
 						/*		level(1)*/
 						/*		edge(2)	*/
 
-#define	CFG_NIOS_CPU_PIO13	0x00000970	/* PIO113	addr	*/
-#define	CFG_NIOS_CPU_PIO13_IRQ	37		/*		IRQ	*/
-#define	CFG_NIOS_CPU_PIO13_BITS	1		/*  number  of  bits	*/
-#define	CFG_NIOS_CPU_PIO13_TYPE	2		/*  io type:	tris(0)	*/
+#define	CONFIG_SYS_NIOS_CPU_PIO13	0x00000970	/* PIO113	addr	*/
+#define	CONFIG_SYS_NIOS_CPU_PIO13_IRQ	37		/*		IRQ	*/
+#define	CONFIG_SYS_NIOS_CPU_PIO13_BITS	1		/*  number  of  bits	*/
+#define	CONFIG_SYS_NIOS_CPU_PIO13_TYPE	2		/*  io type:	tris(0)	*/
 						/*		out(1)	*/
 						/*		in(2)	*/
-#define	CFG_NIOS_CPU_PIO13_CAP	1		/*  capture:	no(0)	*/
+#define	CONFIG_SYS_NIOS_CPU_PIO13_CAP	1		/*  capture:	no(0)	*/
 						/*		yes(1)	*/
-#define	CFG_NIOS_CPU_PIO13_EDGE	2		/*  edge type:	none(0)	*/
+#define	CONFIG_SYS_NIOS_CPU_PIO13_EDGE	2		/*  edge type:	none(0)	*/
 						/*		fall(1)	*/
 						/*		rise(2)	*/
 						/*		any(3)	*/
-#define	CFG_NIOS_CPU_PIO13_ITYPE 1		/*  IRQ type:	none(0)	*/
+#define	CONFIG_SYS_NIOS_CPU_PIO13_ITYPE 1		/*  IRQ type:	none(0)	*/
 						/*		level(1)*/
 						/*		edge(2)	*/
 
 /* IDE i/f */
-#define	CFG_NIOS_CPU_IDE_NUMS	2		/* number of IDE contr.	*/
+#define	CONFIG_SYS_NIOS_CPU_IDE_NUMS	2		/* number of IDE contr.	*/
 
-#define	CFG_NIOS_CPU_IDE0	0x00001000	/* IDE0		addr	*/
-#define	CFG_NIOS_CPU_IDE0_IRQ	36		/*		IRQ	*/
+#define	CONFIG_SYS_NIOS_CPU_IDE0	0x00001000	/* IDE0		addr	*/
+#define	CONFIG_SYS_NIOS_CPU_IDE0_IRQ	36		/*		IRQ	*/
 
-#define	CFG_NIOS_CPU_IDE1	0x00001020	/* IDE1		addr	*/
-#define	CFG_NIOS_CPU_IDE1_IRQ	37		/*		IRQ	*/
+#define	CONFIG_SYS_NIOS_CPU_IDE1	0x00001020	/* IDE1		addr	*/
+#define	CONFIG_SYS_NIOS_CPU_IDE1_IRQ	37		/*		IRQ	*/
 
 /* memory accessibility */
-#undef	CFG_NIOS_CPU_SRAM_BASE			/* board SRAM	addr	*/
-#undef	CFG_NIOS_CPU_SRAM_SIZE			/*  1 MB	size	*/
+#undef	CONFIG_SYS_NIOS_CPU_SRAM_BASE			/* board SRAM	addr	*/
+#undef	CONFIG_SYS_NIOS_CPU_SRAM_SIZE			/*  1 MB	size	*/
 
-#define	CFG_NIOS_CPU_SDRAM_BASE	0x02000000	/* board SDRAM	addr	*/
-#define	CFG_NIOS_CPU_SDRAM_SIZE	(16*1024*1024)	/* 16 MB	size	*/
+#define	CONFIG_SYS_NIOS_CPU_SDRAM_BASE	0x02000000	/* board SDRAM	addr	*/
+#define	CONFIG_SYS_NIOS_CPU_SDRAM_SIZE	(16*1024*1024)	/* 16 MB	size	*/
 
-#define	CFG_NIOS_CPU_FLASH_BASE	0x01000000	/* board Flash	addr	*/
-#define	CFG_NIOS_CPU_FLASH_SIZE	(8*1024*1024)	/*  8 MB	size	*/
+#define	CONFIG_SYS_NIOS_CPU_FLASH_BASE	0x01000000	/* board Flash	addr	*/
+#define	CONFIG_SYS_NIOS_CPU_FLASH_SIZE	(8*1024*1024)	/*  8 MB	size	*/
 
 /* LAN */
-#define	CFG_NIOS_CPU_LAN_NUMS	1		/* number of LAN i/f	*/
+#define	CONFIG_SYS_NIOS_CPU_LAN_NUMS	1		/* number of LAN i/f	*/
 
-#define	CFG_NIOS_CPU_LAN0_BASE	0x00010000	/* LAN0		addr	*/
-#define	CFG_NIOS_CPU_LAN0_OFFS	(0)		/*		offset	*/
-#define	CFG_NIOS_CPU_LAN0_IRQ	20		/*		IRQ	*/
-#define	CFG_NIOS_CPU_LAN0_BUSW	16		/*	        buswidth*/
-#define	CFG_NIOS_CPU_LAN0_TYPE	0		/*	smc91111(0)	*/
+#define	CONFIG_SYS_NIOS_CPU_LAN0_BASE	0x00010000	/* LAN0		addr	*/
+#define	CONFIG_SYS_NIOS_CPU_LAN0_OFFS	(0)		/*		offset	*/
+#define	CONFIG_SYS_NIOS_CPU_LAN0_IRQ	20		/*		IRQ	*/
+#define	CONFIG_SYS_NIOS_CPU_LAN0_BUSW	16		/*	        buswidth*/
+#define	CONFIG_SYS_NIOS_CPU_LAN0_TYPE	0		/*	smc91111(0)	*/
 						/*	cs8900(1)	*/
 						/* ex:	openmac(2)	*/
 						/* ex:	alteramac(3)	*/
 
 /* external extension */
-#define	CFG_NIOS_CPU_CS0_BASE	0x40000000	/* board EXT0	addr	*/
-#define	CFG_NIOS_CPU_CS0_SIZE	(16*1024*1024)	/*  max. 16 MB	size	*/
+#define	CONFIG_SYS_NIOS_CPU_CS0_BASE	0x40000000	/* board EXT0	addr	*/
+#define	CONFIG_SYS_NIOS_CPU_CS0_SIZE	(16*1024*1024)	/*  max. 16 MB	size	*/
 
-#define	CFG_NIOS_CPU_CS1_BASE	0x41000000	/* board EXT1	addr	*/
-#define	CFG_NIOS_CPU_CS1_SIZE	(16*1024*1024)	/*  max. 16 MB	size	*/
+#define	CONFIG_SYS_NIOS_CPU_CS1_BASE	0x41000000	/* board EXT1	addr	*/
+#define	CONFIG_SYS_NIOS_CPU_CS1_SIZE	(16*1024*1024)	/*  max. 16 MB	size	*/
 
-#define	CFG_NIOS_CPU_CS2_BASE	0x42000000	/* board EXT2	addr	*/
-#define	CFG_NIOS_CPU_CS2_SIZE	(16*1024*1024)	/*  max. 16 MB	size	*/
+#define	CONFIG_SYS_NIOS_CPU_CS2_BASE	0x42000000	/* board EXT2	addr	*/
+#define	CONFIG_SYS_NIOS_CPU_CS2_SIZE	(16*1024*1024)	/*  max. 16 MB	size	*/
 
-#define	CFG_NIOS_CPU_CS3_BASE	0x43000000	/* board EXT3	addr	*/
-#define	CFG_NIOS_CPU_CS3_SIZE	(16*1024*1024)	/*  max. 16 MB	size	*/
+#define	CONFIG_SYS_NIOS_CPU_CS3_BASE	0x43000000	/* board EXT3	addr	*/
+#define	CONFIG_SYS_NIOS_CPU_CS3_SIZE	(16*1024*1024)	/*  max. 16 MB	size	*/
 
 /* symbolic redefinition (undef, if not present) */
-#define	CFG_NIOS_CPU_TICK_TIMER		0	/* TIMER0: tick (needed)*/
-#undef	CFG_NIOS_CPU_USER_TIMER			/* TIMERx: users choice	*/
+#define	CONFIG_SYS_NIOS_CPU_TICK_TIMER		0	/* TIMER0: tick (needed)*/
+#undef	CONFIG_SYS_NIOS_CPU_USER_TIMER			/* TIMERx: users choice	*/
 
-#define	CFG_NIOS_CPU_PORTA_PIO		0	/* PIO0: Port A		*/
-#define	CFG_NIOS_CPU_PORTB_PIO		1	/* PIO1: Port D		*/
-#define	CFG_NIOS_CPU_PORTC_PIO		2	/* PIO2: Port C		*/
-#define	CFG_NIOS_CPU_RCM_PIO		3	/* PIO3: RCM jumper	*/
-#define	CFG_NIOS_CPU_WDENA_PIO		4	/* PIO4: watchdog enable*/
-#define	CFG_NIOS_CPU_WDTOG_PIO		5	/* PIO5: watchdog trigg.*/
+#define	CONFIG_SYS_NIOS_CPU_PORTA_PIO		0	/* PIO0: Port A		*/
+#define	CONFIG_SYS_NIOS_CPU_PORTB_PIO		1	/* PIO1: Port D		*/
+#define	CONFIG_SYS_NIOS_CPU_PORTC_PIO		2	/* PIO2: Port C		*/
+#define	CONFIG_SYS_NIOS_CPU_RCM_PIO		3	/* PIO3: RCM jumper	*/
+#define	CONFIG_SYS_NIOS_CPU_WDENA_PIO		4	/* PIO4: watchdog enable*/
+#define	CONFIG_SYS_NIOS_CPU_WDTOG_PIO		5	/* PIO5: watchdog trigg.*/
 
 /* PIOx: LED bar */
 #ifdef	CONFIG_DNPEVA2			/* DNP/EVA2 base board */
-#define	CFG_NIOS_CPU_LED_PIO		CFG_NIOS_CPU_PORTA_PIO
+#define	CONFIG_SYS_NIOS_CPU_LED_PIO		CONFIG_SYS_NIOS_CPU_PORTA_PIO
 #else
-#undef	CFG_NIOS_CPU_LED_PIO			/* no LED bar		*/
+#undef	CONFIG_SYS_NIOS_CPU_LED_PIO			/* no LED bar		*/
 #endif
 
 #endif	/* __CONFIG_ADNPESC1_BASE_32_H */
diff --git a/include/configs/ADS860.h b/include/configs/ADS860.h
index f677b9c80..688e77a73 100644
--- a/include/configs/ADS860.h
+++ b/include/configs/ADS860.h
@@ -27,12 +27,12 @@
 #define CONFIG_BAUDRATE		38400	/* Console baudrate */
 
 #if 0
-#define CFG_8XX_FACT		1526	/* 32.768 kHz crystal on XTAL/EXTAL */
+#define CONFIG_SYS_8XX_FACT		1526	/* 32.768 kHz crystal on XTAL/EXTAL */
 #else
-#define CFG_8XX_FACT		12	/* 4 MHz oscillator on EXTCLK */
+#define CONFIG_SYS_8XX_FACT		12	/* 4 MHz oscillator on EXTCLK */
 #endif
 
-#define CFG_PLPRCR  (((CFG_8XX_FACT-1) << PLPRCR_MF_SHIFT) |	\
+#define CONFIG_SYS_PLPRCR  (((CONFIG_SYS_8XX_FACT-1) << PLPRCR_MF_SHIFT) |	\
 		PLPRCR_SPLSS | PLPRCR_TEXPS | PLPRCR_TMIST)
 
 #define CONFIG_DRAM_50MHZ		1
@@ -53,6 +53,6 @@
 
 #include "../../board/fads/fads.h"
 
-#define CFG_PC_IDE_RESET	((ushort)0x0008)    /* PC 12	*/
+#define CONFIG_SYS_PC_IDE_RESET	((ushort)0x0008)    /* PC 12	*/
 
 #endif	/* __CONFIG_H */
diff --git a/include/configs/AMX860.h b/include/configs/AMX860.h
index 035ebc693..6e2907e7e 100644
--- a/include/configs/AMX860.h
+++ b/include/configs/AMX860.h
@@ -101,25 +101,25 @@
 /*
  * Miscellaneous configurable options
  */
-#define CFG_LONGHELP			/* undef to save memory		*/
-#define	CFG_PROMPT		"=> "	/* Monitor Command Prompt	*/
+#define CONFIG_SYS_LONGHELP			/* undef to save memory		*/
+#define	CONFIG_SYS_PROMPT		"=> "	/* Monitor Command Prompt	*/
 #if defined(CONFIG_CMD_KGDB)
-#define	CFG_CBSIZE	1024		/* Console I/O Buffer Size	*/
+#define	CONFIG_SYS_CBSIZE	1024		/* Console I/O Buffer Size	*/
 #else
-#define	CFG_CBSIZE	256		/* Console I/O Buffer Size	*/
+#define	CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size	*/
 #endif
-#define	CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define	CFG_MAXARGS	16		/* max number of command args	*/
-#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+#define	CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define	CONFIG_SYS_MAXARGS	16		/* max number of command args	*/
+#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
 
-#define CFG_MEMTEST_START	0x0100000	/* memtest works on	*/
-#define CFG_MEMTEST_END		0x0200000	/* 1 ... 4 MB in DRAM	*/
+#define CONFIG_SYS_MEMTEST_START	0x0100000	/* memtest works on	*/
+#define CONFIG_SYS_MEMTEST_END		0x0200000	/* 1 ... 4 MB in DRAM	*/
 
-#define CFG_LOAD_ADDR		0x00100000
+#define CONFIG_SYS_LOAD_ADDR		0x00100000
 
-#define	CFG_HZ		1000		/* decrementer freq: 1 ms ticks	*/
+#define	CONFIG_SYS_HZ		1000		/* decrementer freq: 1 ms ticks	*/
 
-#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
 
 /*
  * Low Level Configuration Settings
@@ -130,31 +130,31 @@
 /*-----------------------------------------------------------------------
  * Internal Memory Mapped Register
  */
-#define CFG_IMMR			0xFF000000
+#define CONFIG_SYS_IMMR			0xFF000000
 
 /*-----------------------------------------------------------------------
  * Definitions for initial stack pointer and data area (in DPRAM)
  */
-#define CFG_INIT_RAM_ADDR	CFG_IMMR
-#define	CFG_INIT_RAM_END	0x2F00	/* End of used area in DPRAM	*/
-#define	CFG_GBL_DATA_SIZE	64  /* size in bytes reserved for initial data */
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define	CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_IMMR
+#define	CONFIG_SYS_INIT_RAM_END	0x2F00	/* End of used area in DPRAM	*/
+#define	CONFIG_SYS_GBL_DATA_SIZE	64  /* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define	CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
 /*-----------------------------------------------------------------------
  * Start addresses for the final memory configuration
  * (Set up by the startup code)
- * Please note that CFG_SDRAM_BASE _must_ start at 0
+ * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
  */
-#define	CFG_SDRAM_BASE		0x00000000
-#define CFG_FLASH_BASE		0x40000000
+#define	CONFIG_SYS_SDRAM_BASE		0x00000000
+#define CONFIG_SYS_FLASH_BASE		0x40000000
 #if defined(DEBUG)
-#define	CFG_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor	*/
+#define	CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor	*/
 #else
-#define	CFG_MONITOR_LEN		(192 << 10)	/* Reserve 192 kB for Monitor	*/
+#define	CONFIG_SYS_MONITOR_LEN		(192 << 10)	/* Reserve 192 kB for Monitor	*/
 #endif
-#define CFG_MONITOR_BASE	CFG_FLASH_BASE
-#define	CFG_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/
+#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_FLASH_BASE
+#define	CONFIG_SYS_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/
 
 /*
  * U-Boot for AMX board supports two types of memory extension
@@ -186,29 +186,29 @@
  * (CONFIG_AMX_RAM_EXT)
  */
 #ifdef CONFIG_AMX_RAM_EXT
-# define	CFG_BOOTMAPSZ	(8 << 20)	/* Initial Memory map for Linux	*/
+# define	CONFIG_SYS_BOOTMAPSZ	(8 << 20)	/* Initial Memory map for Linux	*/
 #else
-# define	CFG_BOOTMAPSZ	(4 << 20)	/* Initial Memory map for Linux	*/
+# define	CONFIG_SYS_BOOTMAPSZ	(4 << 20)	/* Initial Memory map for Linux	*/
 #endif
 /*-----------------------------------------------------------------------
  * FLASH organization
  */
-#define CFG_MAX_FLASH_BANKS	2	/* max number of memory banks		*/
-#define CFG_MAX_FLASH_SECT	35	/* max number of sectors on one chip	*/
+#define CONFIG_SYS_MAX_FLASH_BANKS	2	/* max number of memory banks		*/
+#define CONFIG_SYS_MAX_FLASH_SECT	35	/* max number of sectors on one chip	*/
 
-#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
-#define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
+#define CONFIG_SYS_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
+#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
 
-#define	CFG_ENV_IS_IN_FLASH	1
-#define	CFG_ENV_OFFSET		0x8000	/*   Offset   of Environment Sector	*/
-#define	CFG_ENV_SIZE		0x4000	/* Total Size of Environment Sector	*/
+#define	CONFIG_ENV_IS_IN_FLASH	1
+#define	CONFIG_ENV_OFFSET		0x8000	/*   Offset   of Environment Sector	*/
+#define	CONFIG_ENV_SIZE		0x4000	/* Total Size of Environment Sector	*/
 
 /*-----------------------------------------------------------------------
  * Cache Configuration
  */
-#define CFG_CACHELINE_SIZE	16	/* For all MPC8xx CPUs			*/
+#define CONFIG_SYS_CACHELINE_SIZE	16	/* For all MPC8xx CPUs			*/
 #if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT	4	/* log base 2 of the above value	*/
+#define CONFIG_SYS_CACHELINE_SHIFT	4	/* log base 2 of the above value	*/
 #endif
 
 /*-----------------------------------------------------------------------
@@ -218,10 +218,10 @@
  * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze
  */
 #if defined(CONFIG_WATCHDOG)
-#define CFG_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
+#define CONFIG_SYS_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
 			 SYPCR_SWE  | SYPCR_SWRI| SYPCR_SWP)
 #else
-#define CFG_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
+#define CONFIG_SYS_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
 #endif
 
 /*-----------------------------------------------------------------------
@@ -229,28 +229,28 @@
  *-----------------------------------------------------------------------
  * PCMCIA config., multi-function pin tri-state
  */
-#define CFG_SIUMCR	(SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_MLRC01)
+#define CONFIG_SYS_SIUMCR	(SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_MLRC01)
 
 /*-----------------------------------------------------------------------
  * TBSCR - Time Base Status and Control					11-26
  *-----------------------------------------------------------------------
  * Clear Reference Interrupt Status, Timebase freezing enabled
  */
-#define CFG_TBSCR	(TBSCR_REFA | TBSCR_REFB | TBSCR_TBE)
+#define CONFIG_SYS_TBSCR	(TBSCR_REFA | TBSCR_REFB | TBSCR_TBE)
 
 /*-----------------------------------------------------------------------
  * PISCR - Periodic Interrupt Status and Control		11-31
  *-----------------------------------------------------------------------
  * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
  */
-#define CFG_PISCR	(PISCR_PS | PISCR_PITF)
+#define CONFIG_SYS_PISCR	(PISCR_PS | PISCR_PITF)
 
 /*-----------------------------------------------------------------------
  * PLPRCR - PLL, Low-Power, and Reset Control Register	15-30
  *-----------------------------------------------------------------------
  * set the PLL, the low-power modes and the reset control (15-29)
  */
-#define CFG_PLPRCR	(((MPC8XX_FACT-1) << PLPRCR_MF_SHIFT) |	\
+#define CONFIG_SYS_PLPRCR	(((MPC8XX_FACT-1) << PLPRCR_MF_SHIFT) |	\
 				PLPRCR_SPLSS | PLPRCR_TEXPS | PLPRCR_TMIST)
 
 /*-----------------------------------------------------------------------
@@ -260,9 +260,9 @@
  * power management and some other internal clocks
  */
 #define SCCR_MASK	SCCR_EBDF11
-#define CFG_SCCR	(SCCR_TBS|SCCR_COM00|SCCR_DFSYNC00|SCCR_DFBRG00|SCCR_DFNL000|SCCR_DFNH000|SCCR_DFLCD000|SCCR_DFALCD00)
+#define CONFIG_SYS_SCCR	(SCCR_TBS|SCCR_COM00|SCCR_DFSYNC00|SCCR_DFBRG00|SCCR_DFNL000|SCCR_DFNH000|SCCR_DFLCD000|SCCR_DFALCD00)
 
-#define CFG_DER		0
+#define CONFIG_SYS_DER		0
 
 /*
  * Init Memory Controller:
@@ -275,27 +275,27 @@
 #define FLASH_BASE1_PRELIM	0x60000000	/* FLASH bank #1	*/
 #endif
 
-#define CFG_REMAP_OR_AM		0x80000000	/* OR addr mask */
-#define CFG_PRELIM_OR_AM	0xFFC00000	/* OR addr mask */
+#define CONFIG_SYS_REMAP_OR_AM		0x80000000	/* OR addr mask */
+#define CONFIG_SYS_PRELIM_OR_AM	0xFFC00000	/* OR addr mask */
 
 /* FLASH timing: ACS = 10, TRLX = 1, CSNT = 1, SCY = 3, EHTR = 0	*/
 /*				 0x00000800	0x00000400 0x00000100 0x00000030     0x00000004 */
-#define CFG_OR_TIMING_FLASH	(OR_CSNT_SAM  | OR_ACS_DIV4 | OR_BI | OR_SCY_5_CLK | OR_TRLX)
+#define CONFIG_SYS_OR_TIMING_FLASH	(OR_CSNT_SAM  | OR_ACS_DIV4 | OR_BI | OR_SCY_5_CLK | OR_TRLX)
 
-#define CFG_OR0_REMAP	(CFG_REMAP_OR_AM  | CFG_OR_TIMING_FLASH)
+#define CONFIG_SYS_OR0_REMAP	(CONFIG_SYS_REMAP_OR_AM  | CONFIG_SYS_OR_TIMING_FLASH)
 
-#define CFG_OR0_PRELIM	0xFFC00954	/* Real values for the board */
-#define CFG_BR0_PRELIM	0x40000001	/* Real values for the board */
+#define CONFIG_SYS_OR0_PRELIM	0xFFC00954	/* Real values for the board */
+#define CONFIG_SYS_BR0_PRELIM	0x40000001	/* Real values for the board */
 
 #ifndef CONFIG_AMX_RAM_EXT
-#define CFG_OR1_REMAP	CFG_OR0_REMAP
-#define CFG_OR1_PRELIM	0xFFC00954	/* Real values for the board */
-#define CFG_BR1_PRELIM	0x60000001	/* Real values for the board */
+#define CONFIG_SYS_OR1_REMAP	CONFIG_SYS_OR0_REMAP
+#define CONFIG_SYS_OR1_PRELIM	0xFFC00954	/* Real values for the board */
+#define CONFIG_SYS_BR1_PRELIM	0x60000001	/* Real values for the board */
 #endif
 
 /* DSP ("Glue") Xilinx */
-#define CFG_OR6_PRELIM	0xFFFF8000	/* 32kB, 15 waits, cs after addr, no bursts */
-#define CFG_BR6_PRELIM	0x60000401	/* use GPCM for CS generation, 8 bit port */
+#define CONFIG_SYS_OR6_PRELIM	0xFFFF8000	/* 32kB, 15 waits, cs after addr, no bursts */
+#define CONFIG_SYS_BR6_PRELIM	0x60000401	/* use GPCM for CS generation, 8 bit port */
 
 /*
  * Internal Definitions
diff --git a/include/configs/AP1000.h b/include/configs/AP1000.h
index baa974103..ec982bdc5 100644
--- a/include/configs/AP1000.h
+++ b/include/configs/AP1000.h
@@ -29,22 +29,22 @@
 
 #define CONFIG_PCI	1
 
-#define CFG_HUSH_PARSER 1		/* use "hush" command parser	*/
-#define CFG_PROMPT		"0> "
-#define CFG_PROMPT_HUSH_PS2	"> "
+#define CONFIG_SYS_HUSH_PARSER 1		/* use "hush" command parser	*/
+#define CONFIG_SYS_PROMPT		"0> "
+#define CONFIG_SYS_PROMPT_HUSH_PS2	"> "
 
 #define CONFIG_COMMAND_EDIT	1
 #define CONFIG_COMMAND_HISTORY	1
 #define CONFIG_COMPLETE_ADDRESSES 1
 
-#define CFG_ENV_IS_IN_FLASH	1
-#define CFG_FLASH_USE_BUFFER_WRITE
+#define CONFIG_ENV_IS_IN_FLASH	1
+#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
 
-#ifdef CFG_ENV_IS_IN_NVRAM
-#undef CFG_ENV_IS_IN_FLASH
+#ifdef CONFIG_ENV_IS_IN_NVRAM
+#undef CONFIG_ENV_IS_IN_FLASH
 #else
-#ifdef CFG_ENV_IS_IN_FLASH
-#undef CFG_ENV_IS_IN_NVRAM
+#ifdef CONFIG_ENV_IS_IN_FLASH
+#undef CONFIG_ENV_IS_IN_NVRAM
 #endif
 #endif
 
@@ -62,7 +62,7 @@
 #define CONFIG_BOOTARGS		"console=ttyS0,57600"
 
 #define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
-#define CFG_LOADS_BAUD_CHANGE	1	/* allow baudrate change	*/
+#define CONFIG_SYS_LOADS_BAUD_CHANGE	1	/* allow baudrate change	*/
 
 
 /*
@@ -96,100 +96,100 @@
 /*
  * Miscellaneous configurable options
  */
-#define CFG_LONGHELP			/* undef to save memory	    */
+#define CONFIG_SYS_LONGHELP			/* undef to save memory	    */
 #if defined(CONFIG_CMD_KGDB)
-#define CFG_CBSIZE	1024		/* Console I/O Buffer Size  */
+#define CONFIG_SYS_CBSIZE	1024		/* Console I/O Buffer Size  */
 #else
-#define CFG_CBSIZE	256		/* Console I/O Buffer Size	*/
+#define CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size	*/
 #endif
-/* usually: (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) */
-#define CFG_PBSIZE	(CFG_CBSIZE+4+16)	/* Print Buffer Size */
-#define CFG_MAXARGS	16		/* max number of command args	*/
-#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+/* usually: (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) */
+#define CONFIG_SYS_PBSIZE	(CONFIG_SYS_CBSIZE+4+16)	/* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS	16		/* max number of command args	*/
+#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
 
-#define CFG_ALT_MEMTEST		1
-#define CFG_MEMTEST_START	0x00400000	/* memtest works on */
-#define CFG_MEMTEST_END		0x01000000	/* 4 ... 16 MB in DRAM	*/
+#define CONFIG_SYS_ALT_MEMTEST		1
+#define CONFIG_SYS_MEMTEST_START	0x00400000	/* memtest works on */
+#define CONFIG_SYS_MEMTEST_END		0x01000000	/* 4 ... 16 MB in DRAM	*/
 
 /*
- * If CFG_EXT_SERIAL_CLOCK, then the UART divisor is 1.
- * If CFG_405_UART_ERRATA_59, then UART divisor is 31.
- * Otherwise, UART divisor is determined by CPU Clock and CFG_BASE_BAUD value.
+ * If CONFIG_SYS_EXT_SERIAL_CLOCK, then the UART divisor is 1.
+ * If CONFIG_SYS_405_UART_ERRATA_59, then UART divisor is 31.
+ * Otherwise, UART divisor is determined by CPU Clock and CONFIG_SYS_BASE_BAUD value.
  * The Linux BASE_BAUD define should match this configuration.
  *    baseBaud = cpuClock/(uartDivisor*16)
- * If CFG_405_UART_ERRATA_59 and 200MHz CPU clock,
+ * If CONFIG_SYS_405_UART_ERRATA_59 and 200MHz CPU clock,
  * set Linux BASE_BAUD to 403200.
  */
-#undef	CFG_EXT_SERIAL_CLOCK		/* external serial clock */
-#undef	CFG_405_UART_ERRATA_59		/* 405GP/CR Rev. D silicon */
-
-#define CFG_NS16550_CLK		40000000
-#define CFG_DUART_CHAN		0
-#define CFG_NS16550_COM1	(0x4C000000 + 0x1000)
-#define CFG_NS16550_COM2	(0x4C800000 + 0x1000)
-#define CFG_NS16550_REG_SIZE	4
-#define CFG_NS16550		1
-#define CFG_INIT_CHAN1		1
-#define CFG_INIT_CHAN2		0
+#undef	CONFIG_SYS_EXT_SERIAL_CLOCK		/* external serial clock */
+#undef	CONFIG_SYS_405_UART_ERRATA_59		/* 405GP/CR Rev. D silicon */
+
+#define CONFIG_SYS_NS16550_CLK		40000000
+#define CONFIG_SYS_DUART_CHAN		0
+#define CONFIG_SYS_NS16550_COM1	(0x4C000000 + 0x1000)
+#define CONFIG_SYS_NS16550_COM2	(0x4C800000 + 0x1000)
+#define CONFIG_SYS_NS16550_REG_SIZE	4
+#define CONFIG_SYS_NS16550		1
+#define CONFIG_SYS_INIT_CHAN1		1
+#define CONFIG_SYS_INIT_CHAN2		0
 
 /* The following table includes the supported baudrates */
-#define CFG_BAUDRATE_TABLE  \
+#define CONFIG_SYS_BAUDRATE_TABLE  \
     {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400}
 
-#define CFG_LOAD_ADDR		0x00200000	/* default load address */
-#define CFG_EXTBDINFO		1		/* To use extended board_into (bd_t) */
+#define CONFIG_SYS_LOAD_ADDR		0x00200000	/* default load address */
+#define CONFIG_SYS_EXTBDINFO		1		/* To use extended board_into (bd_t) */
 
-#define CFG_HZ			1000		/* decrementer freq: 1 ms ticks */
+#define CONFIG_SYS_HZ			1000		/* decrementer freq: 1 ms ticks */
 
 /*-----------------------------------------------------------------------
  * Start addresses for the final memory configuration
  * (Set up by the startup code)
- * Please note that CFG_SDRAM_BASE _must_ start at 0
+ * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
  */
-#define CFG_SDRAM_BASE		0x00000000
-#define CFG_FLASH_BASE		0x20000000
-#define CFG_MONITOR_BASE	TEXT_BASE
-#define CFG_MONITOR_LEN		(192 * 1024)	/* Reserve 196 kB for Monitor	*/
-#define CFG_MALLOC_LEN		(128 * 1024)	/* Reserve 128 kB for malloc()	*/
+#define CONFIG_SYS_SDRAM_BASE		0x00000000
+#define CONFIG_SYS_FLASH_BASE		0x20000000
+#define CONFIG_SYS_MONITOR_BASE	TEXT_BASE
+#define CONFIG_SYS_MONITOR_LEN		(192 * 1024)	/* Reserve 196 kB for Monitor	*/
+#define CONFIG_SYS_MALLOC_LEN		(128 * 1024)	/* Reserve 128 kB for malloc()	*/
 
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
+#define CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
 /*-----------------------------------------------------------------------
  * FLASH organization
  */
-#define CFG_FLASH_CFI		1
-#define CFG_PROGFLASH_BASE	CFG_FLASH_BASE
-#define CFG_CONFFLASH_BASE	0x24000000
+#define CONFIG_SYS_FLASH_CFI		1
+#define CONFIG_SYS_PROGFLASH_BASE	CONFIG_SYS_FLASH_BASE
+#define CONFIG_SYS_CONFFLASH_BASE	0x24000000
 
-#define CFG_MAX_FLASH_BANKS	2	/* max number of memory banks	    */
-#define CFG_MAX_FLASH_SECT	256	/* max number of sectors on one chip	*/
+#define CONFIG_SYS_MAX_FLASH_BANKS	2	/* max number of memory banks	    */
+#define CONFIG_SYS_MAX_FLASH_SECT	256	/* max number of sectors on one chip	*/
 
-#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)  */
-#define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
+#define CONFIG_SYS_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)  */
+#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
 
-#define CFG_FLASH_PROTECTION	1	/* use hardware protection	    */
+#define CONFIG_SYS_FLASH_PROTECTION	1	/* use hardware protection	    */
 
 /* BEG ENVIRONNEMENT FLASH */
-#ifdef CFG_ENV_IS_IN_FLASH
-#define CFG_ENV_OFFSET		0x00040000 /* Offset of Environment Sector	*/
-#define CFG_ENV_SIZE		0x1000	/* Total Size of Environment Sector */
-#define CFG_ENV_SECT_SIZE	0x20000 /* see README - env sector total size	*/
+#ifdef CONFIG_ENV_IS_IN_FLASH
+#define CONFIG_ENV_OFFSET		0x00040000 /* Offset of Environment Sector	*/
+#define CONFIG_ENV_SIZE		0x1000	/* Total Size of Environment Sector */
+#define CONFIG_ENV_SECT_SIZE	0x20000 /* see README - env sector total size	*/
 #endif
 /* END ENVIRONNEMENT FLASH */
 /*-----------------------------------------------------------------------
  * NVRAM organization
  */
-#define CFG_NVRAM_BASE_ADDR	0xf0000000	/* NVRAM base address	*/
-#define CFG_NVRAM_SIZE		0x1ff8		/* NVRAM size	*/
+#define CONFIG_SYS_NVRAM_BASE_ADDR	0xf0000000	/* NVRAM base address	*/
+#define CONFIG_SYS_NVRAM_SIZE		0x1ff8		/* NVRAM size	*/
 
-#ifdef CFG_ENV_IS_IN_NVRAM
-#define CFG_ENV_SIZE		0x1000		/* Size of Environment vars */
-#define CFG_ENV_ADDR	    \
-    (CFG_NVRAM_BASE_ADDR+CFG_NVRAM_SIZE-CFG_ENV_SIZE)	/* Env	*/
+#ifdef CONFIG_ENV_IS_IN_NVRAM
+#define CONFIG_ENV_SIZE		0x1000		/* Size of Environment vars */
+#define CONFIG_ENV_ADDR	    \
+    (CONFIG_SYS_NVRAM_BASE_ADDR+CONFIG_SYS_NVRAM_SIZE-CONFIG_ENV_SIZE)	/* Env	*/
 #endif
 
 /*
@@ -198,7 +198,7 @@
  * BR0/1 and OR0/1 (FLASH)
  */
 
-#define FLASH_BASE0_PRELIM	CFG_FLASH_BASE	/* FLASH bank #0	*/
+#define FLASH_BASE0_PRELIM	CONFIG_SYS_FLASH_BASE	/* FLASH bank #0	*/
 #define FLASH_BASE1_PRELIM	0		/* FLASH bank #1	*/
 
 /* Configuration Port location */
@@ -208,11 +208,11 @@
  * Definitions for initial stack pointer and data area (in DPRAM)
  */
 
-#define CFG_INIT_RAM_ADDR	0x400000  /* inside of SDRAM			 */
-#define CFG_INIT_RAM_END	0x2000	/* End of used area in RAM	       */
-#define CFG_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_INIT_RAM_ADDR	0x400000  /* inside of SDRAM			 */
+#define CONFIG_SYS_INIT_RAM_END	0x2000	/* End of used area in RAM	       */
+#define CONFIG_SYS_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
 /*-----------------------------------------------------------------------
  * Definitions for Serial Presence Detect EEPROM address
@@ -235,15 +235,15 @@
 
 /* JFFS2 stuff */
 
-#define CFG_JFFS2_FIRST_BANK	0
-#define CFG_JFFS2_NUM_BANKS	1
-#define CFG_JFFS2_FIRST_SECTOR	1
+#define CONFIG_SYS_JFFS2_FIRST_BANK	0
+#define CONFIG_SYS_JFFS2_NUM_BANKS	1
+#define CONFIG_SYS_JFFS2_FIRST_SECTOR	1
 
 #define CONFIG_NET_MULTI
 #define CONFIG_E1000
 
-#define CFG_ETH_DEV_FN		0x0800
-#define CFG_ETH_IOBASE		0x31000000
-#define CFG_ETH_MEMBASE		0x32000000
+#define CONFIG_SYS_ETH_DEV_FN		0x0800
+#define CONFIG_SYS_ETH_IOBASE		0x31000000
+#define CONFIG_SYS_ETH_MEMBASE		0x32000000
 
 #endif	/* __CONFIG_H */
diff --git a/include/configs/APC405.h b/include/configs/APC405.h
index 6ee0a3631..7453518bf 100644
--- a/include/configs/APC405.h
+++ b/include/configs/APC405.h
@@ -52,14 +52,14 @@
 
 #undef	CONFIG_BOOTARGS
 
-#define CFG_USB_LOAD_COMMAND	"fatload usb 0 200000 pImage;"		\
+#define CONFIG_SYS_USB_LOAD_COMMAND	"fatload usb 0 200000 pImage;"		\
 				"fatload usb 0 300000 pImage.initrd"
-#define CFG_USB_SELF_COMMAND	"usb start;run usb_load;usb stop;"	\
+#define CONFIG_SYS_USB_SELF_COMMAND	"usb start;run usb_load;usb stop;"	\
 				"run ramargs addip addcon usbargs;"	\
 				"bootm 200000 300000"
-#define CFG_USB_ARGS		"setenv bootargs $(bootargs) usbboot=1"
-#define CFG_BOOTLIMIT		"3"
-#define CFG_ALT_BOOTCOMMAND	"run usb_self;reset"
+#define CONFIG_SYS_USB_ARGS		"setenv bootargs $(bootargs) usbboot=1"
+#define CONFIG_SYS_BOOTLIMIT		"3"
+#define CONFIG_SYS_ALT_BOOTCOMMAND	"run usb_self;reset"
 
 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
 	"hostname=abg405\0"                                             \
@@ -88,18 +88,18 @@
 	"netmask=255.255.0.0\0"                                         \
 	"serverip=10.0.0.190\0"						\
 	"splashimage=ffe80000\0"                                        \
-	"usb_load="CFG_USB_LOAD_COMMAND"\0"				\
-	"usb_self="CFG_USB_SELF_COMMAND"\0"				\
-	"usbargs="CFG_USB_ARGS"\0"					\
-	"bootlimit="CFG_BOOTLIMIT"\0"					\
-	"altbootcmd="CFG_ALT_BOOTCOMMAND"\0"				\
+	"usb_load="CONFIG_SYS_USB_LOAD_COMMAND"\0"				\
+	"usb_self="CONFIG_SYS_USB_SELF_COMMAND"\0"				\
+	"usbargs="CONFIG_SYS_USB_ARGS"\0"					\
+	"bootlimit="CONFIG_SYS_BOOTLIMIT"\0"					\
+	"altbootcmd="CONFIG_SYS_ALT_BOOTCOMMAND"\0"				\
 	""
 #define CONFIG_BOOTCOMMAND	"run flash_self;reset"
 
 #define CONFIG_ETHADDR		00:02:27:8e:00:00
 
 #define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
-#define CFG_LOADS_BAUD_CHANGE	1	/* allow baudrate change	*/
+#define CONFIG_SYS_LOADS_BAUD_CHANGE	1	/* allow baudrate change	*/
 
 #define CONFIG_NET_MULTI	1
 #undef  CONFIG_HAS_ETH1
@@ -148,44 +148,44 @@
 #undef  CONFIG_WATCHDOG			/* watchdog disabled */
 
 #define CONFIG_RTC_MC146818		/* DS1685 is MC146818 compatible*/
-#define CFG_RTC_REG_BASE_ADDR 0xF0000500 /* RTC Base Address */
+#define CONFIG_SYS_RTC_REG_BASE_ADDR 0xF0000500 /* RTC Base Address */
 
 #define CONFIG_SDRAM_BANK0	1	/* init onboard SDRAM bank 0 */
 
 /*
  * Miscellaneous configurable options
  */
-#define CFG_LONGHELP			/* undef to save memory */
-#define CFG_PROMPT	"=> "		/* Monitor Command Prompt */
+#define CONFIG_SYS_LONGHELP			/* undef to save memory */
+#define CONFIG_SYS_PROMPT	"=> "		/* Monitor Command Prompt */
 #define CONFIG_CMDLINE_EDITING	1	/* add command line history */
 
 #if defined(CONFIG_CMD_KGDB)
-#define CFG_CBSIZE	1024		/* Console I/O Buffer Size */
+#define CONFIG_SYS_CBSIZE	1024		/* Console I/O Buffer Size */
 #else
-#define CFG_CBSIZE	256		/* Console I/O Buffer Size */
+#define CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size */
 #endif
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define CFG_MAXARGS	16		/* max number of command args */
-#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size */
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS	16		/* max number of command args */
+#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size */
 
-#define CFG_DEVICE_NULLDEV	1	/* include nulldev device */
+#define CONFIG_SYS_DEVICE_NULLDEV	1	/* include nulldev device */
 
-#define CFG_CONSOLE_INFO_QUIET	1	/* don't print console @ startup*/
+#define CONFIG_SYS_CONSOLE_INFO_QUIET	1	/* don't print console @ startup*/
 
-#define CFG_MEMTEST_START	0x0400000 /* memtest works on */
-#define CFG_MEMTEST_END		0x0C00000 /* 4 ... 12 MB in DRAM */
+#define CONFIG_SYS_MEMTEST_START	0x0400000 /* memtest works on */
+#define CONFIG_SYS_MEMTEST_END		0x0C00000 /* 4 ... 12 MB in DRAM */
 
-#define CFG_EXT_SERIAL_CLOCK    14745600 /* use external serial clock   */
+#define CONFIG_SYS_EXT_SERIAL_CLOCK    14745600 /* use external serial clock   */
 
 /* The following table includes the supported baudrates */
-#define CFG_BAUDRATE_TABLE      \
+#define CONFIG_SYS_BAUDRATE_TABLE      \
 	{ 300, 600, 1200, 2400, 4800, 9600, 19200, 38400, \
 	 57600, 115200, 230400, 460800, 921600 }
 
-#define CFG_LOAD_ADDR	0x100000	/* default load address */
-#define CFG_EXTBDINFO	1		/* To use extended board_into (bd_t) */
+#define CONFIG_SYS_LOAD_ADDR	0x100000	/* default load address */
+#define CONFIG_SYS_EXTBDINFO	1		/* To use extended board_into (bd_t) */
 
-#define	CFG_HZ		1000		/* decrementer freq: 1 ms ticks */
+#define	CONFIG_SYS_HZ		1000		/* decrementer freq: 1 ms ticks */
 
 #define CONFIG_ZERO_BOOTDELAY_CHECK	/* check for keypress on bootdelay==0 */
 
@@ -200,7 +200,7 @@
 
 #define CONFIG_VERSION_VARIABLE	1	/* include version env variable */
 
-#define CFG_RX_ETH_BUFFER	16	/* use 16 rx buffer on 405 emac */
+#define CONFIG_SYS_RX_ETH_BUFFER	16	/* use 16 rx buffer on 405 emac */
 
 /*
  * PCI stuff
@@ -216,15 +216,15 @@
 
 #define CONFIG_PCI_SCAN_SHOW		/* print pci devices @ startup  */
 #define CONFIG_PCI_SKIP_HOST_BRIDGE 1
-#define CFG_PCI_SUBSYS_VENDORID 0x12FE  /* PCI Vendor ID: esd gmbh      */
-#define CFG_PCI_SUBSYS_DEVICEID 0x0405  /* PCI Device ID: CPCI-405      */
-#define CFG_PCI_CLASSCODE       0x0b20  /* PCI Class Code: Processor/PPC*/
-#define CFG_PCI_PTM1LA  0x00000000      /* point to sdram               */
-#define CFG_PCI_PTM1MS  0xfc000001      /* 64MB, enable hard-wired to 1 */
-#define CFG_PCI_PTM1PCI 0x00000000      /* Host: use this pci address   */
-#define CFG_PCI_PTM2LA  0xffc00000      /* point to flash               */
-#define CFG_PCI_PTM2MS  0xffc00001      /* 4MB, enable                  */
-#define CFG_PCI_PTM2PCI 0x04000000      /* Host: use this pci address   */
+#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x12FE  /* PCI Vendor ID: esd gmbh      */
+#define CONFIG_SYS_PCI_SUBSYS_DEVICEID 0x0405  /* PCI Device ID: CPCI-405      */
+#define CONFIG_SYS_PCI_CLASSCODE       0x0b20  /* PCI Class Code: Processor/PPC*/
+#define CONFIG_SYS_PCI_PTM1LA  0x00000000      /* point to sdram               */
+#define CONFIG_SYS_PCI_PTM1MS  0xfc000001      /* 64MB, enable hard-wired to 1 */
+#define CONFIG_SYS_PCI_PTM1PCI 0x00000000      /* Host: use this pci address   */
+#define CONFIG_SYS_PCI_PTM2LA  0xffc00000      /* point to flash               */
+#define CONFIG_SYS_PCI_PTM2MS  0xffc00001      /* 4MB, enable                  */
+#define CONFIG_SYS_PCI_PTM2PCI 0x04000000      /* Host: use this pci address   */
 
 /*
  * IDE/ATA stuff
@@ -233,32 +233,32 @@
 #undef  CONFIG_IDE_LED			/* no led for ide supported */
 #define CONFIG_IDE_RESET	1	/* reset for ide supported */
 
-#define CFG_IDE_MAXBUS		1		/* max. 1 IDE busses */
-#define CFG_IDE_MAXDEVICE	(CFG_IDE_MAXBUS) /* max. 1 drives per IDE bus */
+#define CONFIG_SYS_IDE_MAXBUS		1		/* max. 1 IDE busses */
+#define CONFIG_SYS_IDE_MAXDEVICE	(CONFIG_SYS_IDE_MAXBUS) /* max. 1 drives per IDE bus */
 
-#define CFG_ATA_BASE_ADDR	0xF0100000
-#define CFG_ATA_IDE0_OFFSET	0x0000
+#define CONFIG_SYS_ATA_BASE_ADDR	0xF0100000
+#define CONFIG_SYS_ATA_IDE0_OFFSET	0x0000
 
-#define CFG_ATA_DATA_OFFSET	0x0000	/* Offset for data I/O */
-#define CFG_ATA_REG_OFFSET	0x0000	/* Offset for normal register access */
-#define CFG_ATA_ALT_OFFSET	0x0000	/* Offset for alternate registers */
+#define CONFIG_SYS_ATA_DATA_OFFSET	0x0000	/* Offset for data I/O */
+#define CONFIG_SYS_ATA_REG_OFFSET	0x0000	/* Offset for normal register access */
+#define CONFIG_SYS_ATA_ALT_OFFSET	0x0000	/* Offset for alternate registers */
 
 /*
  * Start addresses for the final memory configuration
  * (Set up by the startup code)
- * Please note that CFG_SDRAM_BASE _must_ start at 0
+ * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
  */
-#define CFG_SDRAM_BASE		0x00000000
-#define CFG_MONITOR_BASE	0xFFF80000
-#define CFG_MONITOR_LEN		(512 * 1024)	/* Reserve 512 kB for Monitor */
-#define CFG_MALLOC_LEN		(2*1024*1024)	/* Reserve 2MB for malloc() */
+#define CONFIG_SYS_SDRAM_BASE		0x00000000
+#define CONFIG_SYS_MONITOR_BASE	0xFFF80000
+#define CONFIG_SYS_MONITOR_LEN		(512 * 1024)	/* Reserve 512 kB for Monitor */
+#define CONFIG_SYS_MALLOC_LEN		(2*1024*1024)	/* Reserve 2MB for malloc() */
 
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define CFG_BOOTMAPSZ		(8 << 20)	/* Init. Memory map for Linux */
+#define CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Init. Memory map for Linux */
 
 /*
  * FLASH organization
@@ -267,61 +267,60 @@
 extern int flash_banks;
 #endif
 
-#define CFG_FLASH_BASE		0xFE000000
-#define CFG_FLASH_CFI		1	/* Flash is CFI conformant */
+#define CONFIG_SYS_FLASH_BASE		0xFE000000
+#define CONFIG_SYS_FLASH_CFI		1	/* Flash is CFI conformant */
 #define CONFIG_FLASH_CFI_DRIVER	1	/* Use the common driver */
-#define CFG_MAX_FLASH_SECT	256	/* max num of sects on one chip */
-#define CFG_MAX_FLASH_BANKS	flash_banks /* max num of flash banks */
+#define CONFIG_SYS_MAX_FLASH_SECT	256	/* max num of sects on one chip */
+#define CONFIG_SYS_MAX_FLASH_BANKS	flash_banks /* max num of flash banks */
 					    /* updated in board_early_init_r */
-#define CFG_MAX_FLASH_BANKS_DETECT 2
-#define CFG_FLASH_QUIET_TEST	1
-#define CFG_FLASH_INCREMENT	0x01000000
-#define CFG_FLASH_PROTECTION	1	/* use hardware protection */
-#define CFG_FLASH_AUTOPROTECT_LIST { \
+#define CONFIG_SYS_MAX_FLASH_BANKS_DETECT 2
+#define CONFIG_SYS_FLASH_QUIET_TEST	1
+#define CONFIG_SYS_FLASH_INCREMENT	0x01000000
+#define CONFIG_SYS_FLASH_PROTECTION	1	/* use hardware protection */
+#define CONFIG_SYS_FLASH_AUTOPROTECT_LIST { \
 				{0xfe000000, 0x500000}, \
 				{0xffe80000, 0x180000} \
 				}
-#define CFG_FLASH_USE_BUFFER_WRITE 1	/* use buffered writes (20x faster) */
-#define CFG_FLASH_BANKS_LIST	{ \
-				CFG_FLASH_BASE, \
-				CFG_FLASH_BASE + CFG_FLASH_INCREMENT \
+#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1	/* use buffered writes (20x faster) */
+#define CONFIG_SYS_FLASH_BANKS_LIST	{ \
+				CONFIG_SYS_FLASH_BASE, \
+				CONFIG_SYS_FLASH_BASE + CONFIG_SYS_FLASH_INCREMENT \
 				}
-#define CFG_FLASH_EMPTY_INFO	/* print 'E' for empty sector on flinfo */
+#define CONFIG_SYS_FLASH_EMPTY_INFO	/* print 'E' for empty sector on flinfo */
 
 /*
  * Environment Variable setup
  */
-#define CFG_ENV_IS_IN_EEPROM	1	/* use EEPROM for environment vars */
-#define CFG_ENV_OFFSET		0x000	/* environment starts at the */
+#define CONFIG_ENV_IS_IN_EEPROM	1	/* use EEPROM for environment vars */
+#define CONFIG_ENV_OFFSET		0x000	/* environment starts at the */
 					/* beginning of the EEPROM */
-#define CFG_ENV_SIZE		0x800	/* 2048 bytes may be used for env vars*/
+#define CONFIG_ENV_SIZE		0x800	/* 2048 bytes may be used for env vars*/
 #define CONFIG_ENV_OVERWRITE	1	/* allow overwriting vendor vars */
 
-#define CFG_NVRAM_BASE_ADDR	0xF0000500	/* NVRAM base address */
-#define CFG_NVRAM_SIZE		242		/* NVRAM size */
+#define CONFIG_SYS_NVRAM_BASE_ADDR	0xF0000500	/* NVRAM base address */
+#define CONFIG_SYS_NVRAM_SIZE		242		/* NVRAM size */
 
 /*
  * I2C EEPROM (CAT24WC16) for environment
  */
 #define CONFIG_HARD_I2C			/* I2c with hardware support */
-#define CFG_I2C_SPEED		100000	/* I2C speed and slave address */
-#define CFG_I2C_SLAVE		0x7F
+#define CONFIG_SYS_I2C_SPEED		100000	/* I2C speed and slave address */
+#define CONFIG_SYS_I2C_SLAVE		0x7F
 
-#define CFG_I2C_EEPROM_ADDR	0x50	/* EEPROM CAT28WC08 */
-#define CFG_I2C_EEPROM_ADDR_LEN	1	/* Bytes of address */
+#define CONFIG_SYS_I2C_EEPROM_ADDR	0x50	/* EEPROM CAT28WC08 */
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN	1	/* Bytes of address */
 /* mask of address bits that overflow into the "EEPROM chip address" */
-#define CFG_I2C_EEPROM_ADDR_OVERFLOW	0x07
-#define CFG_EEPROM_PAGE_WRITE_BITS 4	/* The Catalyst CAT24WC08 has */
+#define CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW	0x07
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 4	/* The Catalyst CAT24WC08 has */
 					/* 16 byte page write mode using*/
 					/* last	4 bits of the address */
-#define CFG_EEPROM_PAGE_WRITE_DELAY_MS	10 /* and takes up to 10 msec */
-#define CFG_EEPROM_PAGE_WRITE_ENABLE
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	10 /* and takes up to 10 msec */
 
 /*
  * External Bus Controller (EBC) Setup
  */
-#define FLASH0_BA       (CFG_FLASH_BASE + CFG_FLASH_INCREMENT) /* FLASH 0 BA */
-#define FLASH1_BA       CFG_FLASH_BASE      /* FLASH 1 Base Address          */
+#define FLASH0_BA       (CONFIG_SYS_FLASH_BASE + CONFIG_SYS_FLASH_INCREMENT) /* FLASH 0 BA */
+#define FLASH1_BA       CONFIG_SYS_FLASH_BASE      /* FLASH 1 Base Address          */
 #define CAN_BA          0xF0000000          /* CAN Base Address              */
 #define DUART0_BA       0xF0000400          /* DUART Base Address            */
 #define DUART1_BA       0xF0000408          /* DUART Base Address            */
@@ -334,97 +333,97 @@ extern int flash_banks;
 #define PCMCIA2_BA      0x28000000          /* PCMCIA Slot 2 Base Address    */
 #define VGA_BA          0xF1000000          /* Epson VGA Base Address        */
 
-#define CFG_FPGA_BASE_ADDR      FPGA_BA     /* FPGA internal Base Address    */
+#define CONFIG_SYS_FPGA_BASE_ADDR      FPGA_BA     /* FPGA internal Base Address    */
 
 /* Memory Bank 0 (Flash Bank 0) initialization                               */
-#define CFG_EBC_PB0AP   0x92015480
-#define CFG_EBC_PB0CR   FLASH0_BA | 0x9A000 /* BAS=0xFF0,BS=16MB,BU=R/W,BW=16bit*/
-#define CFG_EBC_PB0AP_HWREV8 CFG_EBC_PB0AP
-#define CFG_EBC_PB0CR_HWREV8 FLASH1_BA | 0xBA000 /* BS=32MB */
+#define CONFIG_SYS_EBC_PB0AP   0x92015480
+#define CONFIG_SYS_EBC_PB0CR   FLASH0_BA | 0x9A000 /* BAS=0xFF0,BS=16MB,BU=R/W,BW=16bit*/
+#define CONFIG_SYS_EBC_PB0AP_HWREV8 CONFIG_SYS_EBC_PB0AP
+#define CONFIG_SYS_EBC_PB0CR_HWREV8 FLASH1_BA | 0xBA000 /* BS=32MB */
 
 /* Memory Bank 1 (Flash Bank 1) initialization                               */
-#define CFG_EBC_PB1AP   0x92015480
-#define CFG_EBC_PB1CR   FLASH1_BA | 0x9A000 /* BAS=0xFE0,BS=16MB,BU=R/W,BW=16bit*/
+#define CONFIG_SYS_EBC_PB1AP   0x92015480
+#define CONFIG_SYS_EBC_PB1CR   FLASH1_BA | 0x9A000 /* BAS=0xFE0,BS=16MB,BU=R/W,BW=16bit*/
 
 /* Memory Bank 2 (CAN0, 1, RTC, Duart) initialization                           */
-#define CFG_EBC_PB2AP   0x010053C0   /* BWT=2,WBN=1,WBF=1,TH=1,RE=1,SOR=1,BEM=1 */
-#define CFG_EBC_PB2CR   CAN_BA | 0x18000    /* BAS=0xF00,BS=1MB,BU=R/W,BW=8bit  */
+#define CONFIG_SYS_EBC_PB2AP   0x010053C0   /* BWT=2,WBN=1,WBF=1,TH=1,RE=1,SOR=1,BEM=1 */
+#define CONFIG_SYS_EBC_PB2CR   CAN_BA | 0x18000    /* BAS=0xF00,BS=1MB,BU=R/W,BW=8bit  */
 
 /* Memory Bank 3 (CompactFlash IDE, FPGA internal) initialization               */
-#define CFG_EBC_PB3AP   0x010059C0   /* BWT=2,WBN=1,WBF=1,TH=1,RE=1,SOR=1,BEM=1 */
-#define CFG_EBC_PB3CR   CF_BA | 0x1A000     /* BAS=0xF01,BS=1MB,BU=R/W,BW=16bit */
+#define CONFIG_SYS_EBC_PB3AP   0x010059C0   /* BWT=2,WBN=1,WBF=1,TH=1,RE=1,SOR=1,BEM=1 */
+#define CONFIG_SYS_EBC_PB3CR   CF_BA | 0x1A000     /* BAS=0xF01,BS=1MB,BU=R/W,BW=16bit */
 
 /* Memory Bank 4 (PCMCIA Slot 1) initialization                                 */
-#define CFG_EBC_PB4AP   0x050007C0   /* BWT=2,WBN=1,WBF=1,TH=1,RE=1,SOR=1,BEM=1 */
-#define CFG_EBC_PB4CR   PCMCIA1_BA | 0xFA000 /*BAS=0x200,BS=128MB,BU=R/W,BW=16bit*/
+#define CONFIG_SYS_EBC_PB4AP   0x050007C0   /* BWT=2,WBN=1,WBF=1,TH=1,RE=1,SOR=1,BEM=1 */
+#define CONFIG_SYS_EBC_PB4CR   PCMCIA1_BA | 0xFA000 /*BAS=0x200,BS=128MB,BU=R/W,BW=16bit*/
 
 /* Memory Bank 5 (Epson VGA) initialization                                     */
-#define CFG_EBC_PB5AP   0x03805380   /* BWT=2,WBN=1,WBF=1,TH=1,RE=1,SOR=1,BEM=0 */
-#define CFG_EBC_PB5CR   VGA_BA | 0x5A000    /* BAS=0xF10,BS=4MB,BU=R/W,BW=16bit */
+#define CONFIG_SYS_EBC_PB5AP   0x03805380   /* BWT=2,WBN=1,WBF=1,TH=1,RE=1,SOR=1,BEM=0 */
+#define CONFIG_SYS_EBC_PB5CR   VGA_BA | 0x5A000    /* BAS=0xF10,BS=4MB,BU=R/W,BW=16bit */
 
 /* Memory Bank 6 (PCMCIA Slot 2) initialization                                 */
-#define CFG_EBC_PB6AP   0x050007C0   /* BWT=2,WBN=1,WBF=1,TH=1,RE=1,SOR=1,BEM=1 */
-#define CFG_EBC_PB6CR   PCMCIA2_BA | 0xFA000 /*BAS=0x280,BS=128MB,BU=R/W,BW=16bit*/
+#define CONFIG_SYS_EBC_PB6AP   0x050007C0   /* BWT=2,WBN=1,WBF=1,TH=1,RE=1,SOR=1,BEM=1 */
+#define CONFIG_SYS_EBC_PB6CR   PCMCIA2_BA | 0xFA000 /*BAS=0x280,BS=128MB,BU=R/W,BW=16bit*/
 
 /*
  * FPGA stuff
  */
 
 /* FPGA internal regs */
-#define CFG_FPGA_CTRL           0x008
-#define CFG_FPGA_CTRL2          0x00a
+#define CONFIG_SYS_FPGA_CTRL           0x008
+#define CONFIG_SYS_FPGA_CTRL2          0x00a
 
 /* FPGA Control Reg */
-#define CFG_FPGA_CTRL_CF_RESET  0x0001
-#define CFG_FPGA_CTRL_WDI       0x0002
-#define CFG_FPGA_CTRL_PS2_RESET 0x0020
+#define CONFIG_SYS_FPGA_CTRL_CF_RESET  0x0001
+#define CONFIG_SYS_FPGA_CTRL_WDI       0x0002
+#define CONFIG_SYS_FPGA_CTRL_PS2_RESET 0x0020
 
-#define CFG_FPGA_SPARTAN2       1           /* using Xilinx Spartan 2 now    */
-#define CFG_FPGA_MAX_SIZE       80*1024     /* 80kByte is enough for XC2S50  */
+#define CONFIG_SYS_FPGA_SPARTAN2       1           /* using Xilinx Spartan 2 now    */
+#define CONFIG_SYS_FPGA_MAX_SIZE       80*1024     /* 80kByte is enough for XC2S50  */
 
 /* FPGA program pin configuration */
-#define CFG_FPGA_PRG            0x04000000  /* FPGA program pin (ppc output) */
-#define CFG_FPGA_CLK            0x02000000  /* FPGA clk pin (ppc output)     */
-#define CFG_FPGA_DATA           0x01000000  /* FPGA data pin (ppc output)    */
-#define CFG_FPGA_INIT           0x00010000  /* FPGA init pin (ppc input)     */
-#define CFG_FPGA_DONE           0x00008000  /* FPGA done pin (ppc input)     */
+#define CONFIG_SYS_FPGA_PRG            0x04000000  /* FPGA program pin (ppc output) */
+#define CONFIG_SYS_FPGA_CLK            0x02000000  /* FPGA clk pin (ppc output)     */
+#define CONFIG_SYS_FPGA_DATA           0x01000000  /* FPGA data pin (ppc output)    */
+#define CONFIG_SYS_FPGA_INIT           0x00010000  /* FPGA init pin (ppc input)     */
+#define CONFIG_SYS_FPGA_DONE           0x00008000  /* FPGA done pin (ppc input)     */
 
 /*
  * LCD Setup
  */
-#define CFG_LCD_BIG_MEM		(VGA_BA + 0x200000) /* S1D13806 Mem Base */
-#define CFG_LCD_BIG_REG		VGA_BA /* S1D13806 Reg Base */
+#define CONFIG_SYS_LCD_BIG_MEM		(VGA_BA + 0x200000) /* S1D13806 Mem Base */
+#define CONFIG_SYS_LCD_BIG_REG		VGA_BA /* S1D13806 Reg Base */
 
 #define CONFIG_LCD_BIG		2 /* Epson S1D13806 used */
 
 /* Image information... */
 #define CONFIG_LCD_USED		CONFIG_LCD_BIG
 
-#define CFG_LCD_MEM		CFG_LCD_BIG_MEM
-#define CFG_LCD_REG		CFG_LCD_BIG_REG
+#define CONFIG_SYS_LCD_MEM		CONFIG_SYS_LCD_BIG_MEM
+#define CONFIG_SYS_LCD_REG		CONFIG_SYS_LCD_BIG_REG
 
-#define CFG_VIDEO_LOGO_MAX_SIZE (1 << 20)
+#define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE (1 << 20)
 
 /*
  * Definitions for initial stack pointer and data area (in data cache)
  */
 
 /* use on chip memory ( OCM ) for temperary stack until sdram is tested */
-#define CFG_TEMP_STACK_OCM	1
+#define CONFIG_SYS_TEMP_STACK_OCM	1
 
 /* On Chip Memory location */
-#define CFG_OCM_DATA_ADDR	0xF8000000
-#define CFG_OCM_DATA_SIZE	0x1000
+#define CONFIG_SYS_OCM_DATA_ADDR	0xF8000000
+#define CONFIG_SYS_OCM_DATA_SIZE	0x1000
 
-#define CFG_INIT_RAM_ADDR	CFG_OCM_DATA_ADDR /* inside of SDRAM */
-#define CFG_INIT_RAM_END	CFG_OCM_DATA_SIZE /* End of used area in RAM */
-#define CFG_GBL_DATA_SIZE	128 /* reserved bytes for initial data */
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_OCM_DATA_ADDR /* inside of SDRAM */
+#define CONFIG_SYS_INIT_RAM_END	CONFIG_SYS_OCM_DATA_SIZE /* End of used area in RAM */
+#define CONFIG_SYS_GBL_DATA_SIZE	128 /* reserved bytes for initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
 /* reserve some memory for BOOT limit info */
-#define CFG_INIT_SP_OFFSET	(CFG_GBL_DATA_OFFSET - 16)
+#define CONFIG_SYS_INIT_SP_OFFSET	(CONFIG_SYS_GBL_DATA_OFFSET - 16)
 
 #ifdef CONFIG_BOOTCOUNT_LIMIT /* reserve 2 word for bootcount limit */
-#define CFG_BOOTCOUNT_ADDR (CFG_GBL_DATA_OFFSET - 8)
+#define CONFIG_SYS_BOOTCOUNT_ADDR (CONFIG_SYS_GBL_DATA_OFFSET - 8)
 #endif
 
 /*
@@ -440,10 +439,10 @@ extern int flash_banks;
  */
 #define CONFIG_USB_OHCI_NEW	1
 #define CONFIG_PCI_OHCI		1
-#define CFG_OHCI_SWAP_REG_ACCESS 1
-#define CFG_USB_OHCI_MAX_ROOT_PORTS 15
-#define CFG_USB_OHCI_SLOT_NAME	"ohci_pci"
+#define CONFIG_SYS_OHCI_SWAP_REG_ACCESS 1
+#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 15
+#define CONFIG_SYS_USB_OHCI_SLOT_NAME	"ohci_pci"
 #define CONFIG_USB_STORAGE	1
-#define CFG_USB_OHCI_BOARD_INIT 1
+#define CONFIG_SYS_USB_OHCI_BOARD_INIT 1
 
 #endif /* __CONFIG_H */
diff --git a/include/configs/AR405.h b/include/configs/AR405.h
index 06023819f..9f1926957 100644
--- a/include/configs/AR405.h
+++ b/include/configs/AR405.h
@@ -65,8 +65,9 @@
 #define CONFIG_PREBOOT                  /* enable preboot variable      */
 
 #define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
-#define CFG_LOADS_BAUD_CHANGE	1	/* allow baudrate change	*/
+#define CONFIG_SYS_LOADS_BAUD_CHANGE	1	/* allow baudrate change	*/
 
+#define CONFIG_PPC4xx_EMAC
 #define CONFIG_MII		1	/* MII PHY management		*/
 #define CONFIG_PHY_ADDR		0	/* PHY address			*/
 #define CONFIG_LXT971_NO_SLEEP  1       /* disable sleep mode in LXT971 */
@@ -102,39 +103,39 @@
 /*
  * Miscellaneous configurable options
  */
-#define CFG_LONGHELP			/* undef to save memory		*/
-#define CFG_PROMPT	"=> "		/* Monitor Command Prompt	*/
+#define CONFIG_SYS_LONGHELP			/* undef to save memory		*/
+#define CONFIG_SYS_PROMPT	"=> "		/* Monitor Command Prompt	*/
 #if defined(CONFIG_CMD_KGDB)
-#define CFG_CBSIZE	1024		/* Console I/O Buffer Size	*/
+#define CONFIG_SYS_CBSIZE	1024		/* Console I/O Buffer Size	*/
 #else
-#define CFG_CBSIZE	256		/* Console I/O Buffer Size	*/
+#define CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size	*/
 #endif
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define CFG_MAXARGS	16		/* max number of command args	*/
-#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS	16		/* max number of command args	*/
+#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
 
-#define CFG_DEVICE_NULLDEV	1	/* include nulldev device	*/
+#define CONFIG_SYS_DEVICE_NULLDEV	1	/* include nulldev device	*/
 
-#define CFG_CONSOLE_INFO_QUIET	1	/* don't print console @ startup*/
+#define CONFIG_SYS_CONSOLE_INFO_QUIET	1	/* don't print console @ startup*/
 
 #define CONFIG_AUTO_COMPLETE	1       /* add autocompletion support   */
 #define CONFIG_LOOPW            1       /* enable loopw command         */
 #define CONFIG_MX_CYCLIC        1       /* enable mdc/mwc commands      */
 
-#define CFG_MEMTEST_START	0x0400000	/* memtest works on	*/
-#define CFG_MEMTEST_END		0x0C00000	/* 4 ... 12 MB in DRAM	*/
+#define CONFIG_SYS_MEMTEST_START	0x0400000	/* memtest works on	*/
+#define CONFIG_SYS_MEMTEST_END		0x0C00000	/* 4 ... 12 MB in DRAM	*/
 
-#define CFG_EXT_SERIAL_CLOCK	14745600 /* use external serial clock	*/
+#define CONFIG_SYS_EXT_SERIAL_CLOCK	14745600 /* use external serial clock	*/
 
 /* The following table includes the supported baudrates */
-#define CFG_BAUDRATE_TABLE	\
+#define CONFIG_SYS_BAUDRATE_TABLE	\
 	{ 300, 600, 1200, 2400, 4800, 9600, 19200, 38400,     \
 	 57600, 115200, 230400, 460800, 921600 }
 
-#define CFG_LOAD_ADDR	0x100000	/* default load address */
-#define CFG_EXTBDINFO	1		/* To use extended board_into (bd_t) */
+#define CONFIG_SYS_LOAD_ADDR	0x100000	/* default load address */
+#define CONFIG_SYS_EXTBDINFO	1		/* To use extended board_into (bd_t) */
 
-#define CFG_HZ		1000		/* decrementer freq: 1 ms ticks */
+#define CONFIG_SYS_HZ		1000		/* decrementer freq: 1 ms ticks */
 
 #define CONFIG_ZERO_BOOTDELAY_CHECK	/* check for keypress on bootdelay==0 */
 
@@ -157,61 +158,61 @@
 
 #define CONFIG_PCI_BOOTDELAY	0	/* enable pci bootdelay variable*/
 
-#define CFG_PCI_SUBSYS_VENDORID 0x12FE	/* PCI Vendor ID: esd gmbh	*/
-#define CFG_PCI_SUBSYS_DEVICEID 0x0403	/* PCI Device ID: ARISTO405	*/
-#define CFG_PCI_PTM1LA	0x00000000	/* point to sdram		*/
-#define CFG_PCI_PTM1MS	0x80000001	/* 2GB, enable hard-wired to 1	*/
-#define CFG_PCI_PTM1PCI 0x00000000	/* Host: use this pci address	*/
-#define CFG_PCI_PTM2LA	0xfff00000	/* point to flash		*/
-#define CFG_PCI_PTM2MS	0xfff00001	/* 1MB, enable			*/
-#define CFG_PCI_PTM2PCI 0x04000000	/* Host: use this pci address	*/
+#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x12FE	/* PCI Vendor ID: esd gmbh	*/
+#define CONFIG_SYS_PCI_SUBSYS_DEVICEID 0x0403	/* PCI Device ID: ARISTO405	*/
+#define CONFIG_SYS_PCI_PTM1LA	0x00000000	/* point to sdram		*/
+#define CONFIG_SYS_PCI_PTM1MS	0x80000001	/* 2GB, enable hard-wired to 1	*/
+#define CONFIG_SYS_PCI_PTM1PCI 0x00000000	/* Host: use this pci address	*/
+#define CONFIG_SYS_PCI_PTM2LA	0xfff00000	/* point to flash		*/
+#define CONFIG_SYS_PCI_PTM2MS	0xfff00001	/* 1MB, enable			*/
+#define CONFIG_SYS_PCI_PTM2PCI 0x04000000	/* Host: use this pci address	*/
 
 /*-----------------------------------------------------------------------
  * Start addresses for the final memory configuration
  * (Set up by the startup code)
- * Please note that CFG_SDRAM_BASE _must_ start at 0
+ * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
  */
-#define CFG_SDRAM_BASE		0x00000000
-#define CFG_FLASH_BASE		0xFFFC0000
-#define CFG_MONITOR_BASE	CFG_FLASH_BASE
-#define CFG_MONITOR_LEN		(256 * 1024)	/* Reserve 256 kB for Monitor	*/
-#define CFG_MALLOC_LEN		(128 * 1024)	/* Reserve 128 kB for malloc()	*/
+#define CONFIG_SYS_SDRAM_BASE		0x00000000
+#define CONFIG_SYS_FLASH_BASE		0xFFFC0000
+#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_FLASH_BASE
+#define CONFIG_SYS_MONITOR_LEN		(256 * 1024)	/* Reserve 256 kB for Monitor	*/
+#define CONFIG_SYS_MALLOC_LEN		(128 * 1024)	/* Reserve 128 kB for malloc()	*/
 
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
+#define CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
 /*-----------------------------------------------------------------------
  * FLASH organization
  */
-#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
-#define CFG_MAX_FLASH_SECT	256	/* max number of sectors on one chip	*/
+#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
+#define CONFIG_SYS_MAX_FLASH_SECT	256	/* max number of sectors on one chip	*/
 
-#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
-#define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
+#define CONFIG_SYS_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
+#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
 
-#define CFG_FLASH_WORD_SIZE	unsigned short	/* flash word size (width)	*/
-#define CFG_FLASH_ADDR0		0x5555	/* 1st address for flash config cycles	*/
-#define CFG_FLASH_ADDR1		0x2AAA	/* 2nd address for flash config cycles	*/
+#define CONFIG_SYS_FLASH_WORD_SIZE	unsigned short	/* flash word size (width)	*/
+#define CONFIG_SYS_FLASH_ADDR0		0x5555	/* 1st address for flash config cycles	*/
+#define CONFIG_SYS_FLASH_ADDR1		0x2AAA	/* 2nd address for flash config cycles	*/
 /*
  * The following defines are added for buggy IOP480 byte interface.
  * All other boards should use the standard values (CPCI405 etc.)
  */
-#define CFG_FLASH_READ0		0x0000	/* 0 is standard			*/
-#define CFG_FLASH_READ1		0x0001	/* 1 is standard			*/
-#define CFG_FLASH_READ2		0x0002	/* 2 is standard			*/
+#define CONFIG_SYS_FLASH_READ0		0x0000	/* 0 is standard			*/
+#define CONFIG_SYS_FLASH_READ1		0x0001	/* 1 is standard			*/
+#define CONFIG_SYS_FLASH_READ2		0x0002	/* 2 is standard			*/
 
-#define CFG_FLASH_EMPTY_INFO		/* print 'E' for empty sector on flinfo */
+#define CONFIG_SYS_FLASH_EMPTY_INFO		/* print 'E' for empty sector on flinfo */
 
-#define CFG_ENV_IS_IN_FLASH	1
-#define CFG_ENV_ADDR		0xFFFB0000	/* Address of Environment Sector*/
-#define CFG_ENV_SECT_SIZE	0x10000 /* see README - env sector total size	*/
-#define CFG_ENV_SIZE		0x04000	        /* Size of Environment	        */
+#define CONFIG_ENV_IS_IN_FLASH	1
+#define CONFIG_ENV_ADDR		0xFFFB0000	/* Address of Environment Sector*/
+#define CONFIG_ENV_SECT_SIZE	0x10000 /* see README - env sector total size	*/
+#define CONFIG_ENV_SIZE		0x04000	        /* Size of Environment	        */
 
-#define CFG_ENV_ADDR_REDUND     0xFFFA0000
-#define CFG_ENV_SIZE_REDUND	CFG_ENV_SIZE
+#define CONFIG_ENV_ADDR_REDUND     0xFFFA0000
+#define CONFIG_ENV_SIZE_REDUND	CONFIG_ENV_SIZE
 
 /*
  * Init Memory Controller:
@@ -226,39 +227,39 @@
  */
 
 /* Memory Bank 0 (Flash Bank 0) initialization					*/
-#define CFG_EBC_PB0AP		0x92015480
-#define CFG_EBC_PB0CR		0xFFC5A000  /* BAS=0xFFC,BS=4MB,BU=R/W,BW=16bit */
+#define CONFIG_SYS_EBC_PB0AP		0x92015480
+#define CONFIG_SYS_EBC_PB0CR		0xFFC5A000  /* BAS=0xFFC,BS=4MB,BU=R/W,BW=16bit */
 
 /* Memory Bank 1 (CAN0, 1, 2, 3) initialization					*/
-#define CFG_EBC_PB1AP		0x01000380  /* enable Ready, BEM=0		*/
-#define CFG_EBC_PB1CR		0xF0018000  /* BAS=0xF00,BS=1MB,BU=R/W,BW=8bit	*/
+#define CONFIG_SYS_EBC_PB1AP		0x01000380  /* enable Ready, BEM=0		*/
+#define CONFIG_SYS_EBC_PB1CR		0xF0018000  /* BAS=0xF00,BS=1MB,BU=R/W,BW=8bit	*/
 
 /* Memory Bank 2 (Expension Bus) initialization					*/
-#define CFG_EBC_PB2AP		0x01000280  /* disable Ready, BEM=0		*/
-#define CFG_EBC_PB2CR		0xF0118000  /* BAS=0xF01,BS=1MB,BU=R/W,BW=8bit	*/
+#define CONFIG_SYS_EBC_PB2AP		0x01000280  /* disable Ready, BEM=0		*/
+#define CONFIG_SYS_EBC_PB2CR		0xF0118000  /* BAS=0xF01,BS=1MB,BU=R/W,BW=8bit	*/
 
 /* Memory Bank 3 (16552) initialization						*/
-#define CFG_EBC_PB3AP		0x01000380  /* enable Ready, BEM=0		*/
-#define CFG_EBC_PB3CR		0xF0218000  /* BAS=0xF02,BS=1MB,BU=R/W,BW=8bit	*/
+#define CONFIG_SYS_EBC_PB3AP		0x01000380  /* enable Ready, BEM=0		*/
+#define CONFIG_SYS_EBC_PB3CR		0xF0218000  /* BAS=0xF02,BS=1MB,BU=R/W,BW=8bit	*/
 
 /* Memory Bank 4 (FPGA regs) initialization					*/
-#define CFG_EBC_PB4AP		0x01005380  /* enable Ready, BEM=0		*/
-#define CFG_EBC_PB4CR		0xF031C000  /* BAS=0xF03,BS=1MB,BU=R/W,BW=32bit */
+#define CONFIG_SYS_EBC_PB4AP		0x01005380  /* enable Ready, BEM=0		*/
+#define CONFIG_SYS_EBC_PB4CR		0xF031C000  /* BAS=0xF03,BS=1MB,BU=R/W,BW=32bit */
 
 /* Memory Bank 5 (Flash Bank 1/DUMMY) initialization				*/
-#define CFG_EBC_PB5AP		0x92015480
-#define CFG_EBC_PB5CR		0xFF85A000  /* BAS=0xFF8,BS=4MB,BU=R/W,BW=16bit */
+#define CONFIG_SYS_EBC_PB5AP		0x92015480
+#define CONFIG_SYS_EBC_PB5CR		0xFF85A000  /* BAS=0xFF8,BS=4MB,BU=R/W,BW=16bit */
 
 /*-----------------------------------------------------------------------
  * Definitions for initial stack pointer and data area (in data cache)
  */
-#define CFG_INIT_DCACHE_CS	7	/* use cs # 7 for data cache memory    */
+#define CONFIG_SYS_INIT_DCACHE_CS	7	/* use cs # 7 for data cache memory    */
 
-#define CFG_INIT_RAM_ADDR	0x40000000  /* use data cache		       */
-#define CFG_INIT_RAM_END	0x2000	/* End of used area in RAM	       */
-#define CFG_GBL_DATA_SIZE      128  /* size in bytes reserved for initial data */
-#define CFG_GBL_DATA_OFFSET    (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_INIT_RAM_ADDR	0x40000000  /* use data cache		       */
+#define CONFIG_SYS_INIT_RAM_END	0x2000	/* End of used area in RAM	       */
+#define CONFIG_SYS_GBL_DATA_SIZE      128  /* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET    (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
 /*
  * Internal Definitions
diff --git a/include/configs/ASH405.h b/include/configs/ASH405.h
index 85c6a992d..a694083d5 100644
--- a/include/configs/ASH405.h
+++ b/include/configs/ASH405.h
@@ -51,11 +51,12 @@
 #define CONFIG_PREBOOT                  /* enable preboot variable      */
 
 #define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
-#define CFG_LOADS_BAUD_CHANGE	1	/* allow baudrate change	*/
+#define CONFIG_SYS_LOADS_BAUD_CHANGE	1	/* allow baudrate change	*/
 
 #define CONFIG_NET_MULTI	1
 #undef  CONFIG_HAS_ETH1
 
+#define CONFIG_PPC4xx_EMAC
 #define CONFIG_MII		1	/* MII PHY management		*/
 #define CONFIG_PHY_ADDR		0	/* PHY address			*/
 #define CONFIG_LXT971_NO_SLEEP  1       /* disable sleep mode in LXT971 */
@@ -92,74 +93,74 @@
 #undef	CONFIG_WATCHDOG			/* watchdog disabled		*/
 
 #define CONFIG_RTC_MC146818		/* DS1685 is MC146818 compatible*/
-#define CFG_RTC_REG_BASE_ADDR	 0xF0000500 /* RTC Base Address		*/
+#define CONFIG_SYS_RTC_REG_BASE_ADDR	 0xF0000500 /* RTC Base Address		*/
 
 #define CONFIG_SDRAM_BANK0	1	/* init onboard SDRAM bank 0	*/
 
 /*
  * Miscellaneous configurable options
  */
-#define CFG_LONGHELP			/* undef to save memory		*/
-#define CFG_PROMPT	"=> "		/* Monitor Command Prompt	*/
+#define CONFIG_SYS_LONGHELP			/* undef to save memory		*/
+#define CONFIG_SYS_PROMPT	"=> "		/* Monitor Command Prompt	*/
 
-#undef	CFG_HUSH_PARSER			/* use "hush" command parser	*/
-#ifdef	CFG_HUSH_PARSER
-#define CFG_PROMPT_HUSH_PS2	"> "
+#undef	CONFIG_SYS_HUSH_PARSER			/* use "hush" command parser	*/
+#ifdef	CONFIG_SYS_HUSH_PARSER
+#define CONFIG_SYS_PROMPT_HUSH_PS2	"> "
 #endif
 
 #if defined(CONFIG_CMD_KGDB)
-#define CFG_CBSIZE	1024		/* Console I/O Buffer Size	*/
+#define CONFIG_SYS_CBSIZE	1024		/* Console I/O Buffer Size	*/
 #else
-#define CFG_CBSIZE	256		/* Console I/O Buffer Size	*/
+#define CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size	*/
 #endif
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define CFG_MAXARGS	16		/* max number of command args	*/
-#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS	16		/* max number of command args	*/
+#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
 
-#define CFG_DEVICE_NULLDEV	1	/* include nulldev device	*/
+#define CONFIG_SYS_DEVICE_NULLDEV	1	/* include nulldev device	*/
 
-#define CFG_CONSOLE_INFO_QUIET	1	/* don't print console @ startup*/
+#define CONFIG_SYS_CONSOLE_INFO_QUIET	1	/* don't print console @ startup*/
 
-#define CFG_MEMTEST_START	0x0400000	/* memtest works on	*/
-#define CFG_MEMTEST_END		0x0C00000	/* 4 ... 12 MB in DRAM	*/
+#define CONFIG_SYS_MEMTEST_START	0x0400000	/* memtest works on	*/
+#define CONFIG_SYS_MEMTEST_END		0x0C00000	/* 4 ... 12 MB in DRAM	*/
 
-#undef	CFG_EXT_SERIAL_CLOCK	       /* no external serial clock used */
-#define CFG_IGNORE_405_UART_ERRATA_59	/* ignore ppc405gp errata #59	*/
-#define CFG_BASE_BAUD	    691200
+#undef	CONFIG_SYS_EXT_SERIAL_CLOCK	       /* no external serial clock used */
+#define CONFIG_SYS_IGNORE_405_UART_ERRATA_59	/* ignore ppc405gp errata #59	*/
+#define CONFIG_SYS_BASE_BAUD	    691200
 #undef	CONFIG_UART1_CONSOLE		/* define for uart1 as console	*/
 
 /* The following table includes the supported baudrates */
-#define CFG_BAUDRATE_TABLE	\
+#define CONFIG_SYS_BAUDRATE_TABLE	\
 	{ 300, 600, 1200, 2400, 4800, 9600, 19200, 38400,     \
 	 57600, 115200, 230400, 460800, 921600 }
 
-#define CFG_LOAD_ADDR	0x100000	/* default load address */
-#define CFG_EXTBDINFO	1		/* To use extended board_into (bd_t) */
+#define CONFIG_SYS_LOAD_ADDR	0x100000	/* default load address */
+#define CONFIG_SYS_EXTBDINFO	1		/* To use extended board_into (bd_t) */
 
-#define CFG_HZ		1000		/* decrementer freq: 1 ms ticks */
+#define CONFIG_SYS_HZ		1000		/* decrementer freq: 1 ms ticks */
 
 #define CONFIG_ZERO_BOOTDELAY_CHECK	/* check for keypress on bootdelay==0 */
 
 #define CONFIG_VERSION_VARIABLE 1	/* include version env variable */
 
-#define CFG_RX_ETH_BUFFER	16	/* use 16 rx buffer on 405 emac */
+#define CONFIG_SYS_RX_ETH_BUFFER	16	/* use 16 rx buffer on 405 emac */
 
 /*-----------------------------------------------------------------------
  * NAND-FLASH stuff
  *-----------------------------------------------------------------------
  */
-#define CFG_NAND_BASE_LIST	{ CFG_NAND_BASE }
+#define CONFIG_SYS_NAND_BASE_LIST	{ CONFIG_SYS_NAND_BASE }
 #define NAND_MAX_CHIPS          1
-#define CFG_MAX_NAND_DEVICE	1         /* Max number of NAND devices */
+#define CONFIG_SYS_MAX_NAND_DEVICE	1         /* Max number of NAND devices */
 #define NAND_BIG_DELAY_US	25
 
-#define CFG_NAND_CE             (0x80000000 >> 1)   /* our CE is GPIO1  */
-#define CFG_NAND_RDY            (0x80000000 >> 4)   /* our RDY is GPIO4 */
-#define CFG_NAND_CLE            (0x80000000 >> 2)   /* our CLE is GPIO2 */
-#define CFG_NAND_ALE            (0x80000000 >> 3)   /* our ALE is GPIO3 */
+#define CONFIG_SYS_NAND_CE             (0x80000000 >> 1)   /* our CE is GPIO1  */
+#define CONFIG_SYS_NAND_RDY            (0x80000000 >> 4)   /* our RDY is GPIO4 */
+#define CONFIG_SYS_NAND_CLE            (0x80000000 >> 2)   /* our CLE is GPIO2 */
+#define CONFIG_SYS_NAND_ALE            (0x80000000 >> 3)   /* our ALE is GPIO3 */
 
-#define CFG_NAND_SKIP_BAD_DOT_I 1       /* ".i" read skips bad blocks   */
-#define CFG_NAND_QUIET          1
+#define CONFIG_SYS_NAND_SKIP_BAD_DOT_I 1       /* ".i" read skips bad blocks   */
+#define CONFIG_SYS_NAND_QUIET          1
 
 /*-----------------------------------------------------------------------
  * PCI stuff
@@ -176,87 +177,86 @@
 
 #undef	CONFIG_PCI_SCAN_SHOW		/* print pci devices @ startup	*/
 
-#define CFG_PCI_SUBSYS_VENDORID 0x12FE	/* PCI Vendor ID: esd gmbh	*/
-#define CFG_PCI_SUBSYS_DEVICEID 0x0405	/* PCI Device ID: CPCI-405	*/
-#define CFG_PCI_CLASSCODE	0x0b20	/* PCI Class Code: Processor/PPC*/
-#define CFG_PCI_PTM1LA	0x00000000	/* point to sdram		*/
-#define CFG_PCI_PTM1MS	0xfc000001	/* 64MB, enable hard-wired to 1 */
-#define CFG_PCI_PTM1PCI 0x00000000	/* Host: use this pci address	*/
-#define CFG_PCI_PTM2LA	0xffc00000	/* point to flash		*/
-#define CFG_PCI_PTM2MS	0xffc00001	/* 4MB, enable			*/
-#define CFG_PCI_PTM2PCI 0x04000000	/* Host: use this pci address	*/
+#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x12FE	/* PCI Vendor ID: esd gmbh	*/
+#define CONFIG_SYS_PCI_SUBSYS_DEVICEID 0x0405	/* PCI Device ID: CPCI-405	*/
+#define CONFIG_SYS_PCI_CLASSCODE	0x0b20	/* PCI Class Code: Processor/PPC*/
+#define CONFIG_SYS_PCI_PTM1LA	0x00000000	/* point to sdram		*/
+#define CONFIG_SYS_PCI_PTM1MS	0xfc000001	/* 64MB, enable hard-wired to 1 */
+#define CONFIG_SYS_PCI_PTM1PCI 0x00000000	/* Host: use this pci address	*/
+#define CONFIG_SYS_PCI_PTM2LA	0xffc00000	/* point to flash		*/
+#define CONFIG_SYS_PCI_PTM2MS	0xffc00001	/* 4MB, enable			*/
+#define CONFIG_SYS_PCI_PTM2PCI 0x04000000	/* Host: use this pci address	*/
 
 /*-----------------------------------------------------------------------
  * Start addresses for the final memory configuration
  * (Set up by the startup code)
- * Please note that CFG_SDRAM_BASE _must_ start at 0
+ * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
  */
-#define CFG_SDRAM_BASE		0x00000000
-#define CFG_FLASH_BASE		0xFFFC0000
-#define CFG_MONITOR_BASE	CFG_FLASH_BASE
-#define CFG_MONITOR_LEN		(256 * 1024)	/* Reserve 256 kB for Monitor	*/
-#define CFG_MALLOC_LEN		(256 * 1024)	/* Reserve 256 kB for malloc()	*/
+#define CONFIG_SYS_SDRAM_BASE		0x00000000
+#define CONFIG_SYS_FLASH_BASE		0xFFFC0000
+#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_FLASH_BASE
+#define CONFIG_SYS_MONITOR_LEN		(256 * 1024)	/* Reserve 256 kB for Monitor	*/
+#define CONFIG_SYS_MALLOC_LEN		(256 * 1024)	/* Reserve 256 kB for malloc()	*/
 
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
+#define CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
 /*-----------------------------------------------------------------------
  * FLASH organization
  */
-#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
-#define CFG_MAX_FLASH_SECT	256	/* max number of sectors on one chip	*/
+#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
+#define CONFIG_SYS_MAX_FLASH_SECT	256	/* max number of sectors on one chip	*/
 
-#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
-#define CFG_FLASH_WRITE_TOUT	1000	/* Timeout for Flash Write (in ms)	*/
+#define CONFIG_SYS_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
+#define CONFIG_SYS_FLASH_WRITE_TOUT	1000	/* Timeout for Flash Write (in ms)	*/
 
-#define CFG_FLASH_WORD_SIZE	unsigned short	/* flash word size (width)	*/
-#define CFG_FLASH_ADDR0		0x5555	/* 1st address for flash config cycles	*/
-#define CFG_FLASH_ADDR1		0x2AAA	/* 2nd address for flash config cycles	*/
+#define CONFIG_SYS_FLASH_WORD_SIZE	unsigned short	/* flash word size (width)	*/
+#define CONFIG_SYS_FLASH_ADDR0		0x5555	/* 1st address for flash config cycles	*/
+#define CONFIG_SYS_FLASH_ADDR1		0x2AAA	/* 2nd address for flash config cycles	*/
 /*
  * The following defines are added for buggy IOP480 byte interface.
  * All other boards should use the standard values (CPCI405 etc.)
  */
-#define CFG_FLASH_READ0		0x0000	/* 0 is standard			*/
-#define CFG_FLASH_READ1		0x0001	/* 1 is standard			*/
-#define CFG_FLASH_READ2		0x0002	/* 2 is standard			*/
+#define CONFIG_SYS_FLASH_READ0		0x0000	/* 0 is standard			*/
+#define CONFIG_SYS_FLASH_READ1		0x0001	/* 1 is standard			*/
+#define CONFIG_SYS_FLASH_READ2		0x0002	/* 2 is standard			*/
 
-#define CFG_FLASH_EMPTY_INFO		/* print 'E' for empty sector on flinfo */
+#define CONFIG_SYS_FLASH_EMPTY_INFO		/* print 'E' for empty sector on flinfo */
 
 #if 0 /* test-only */
-#define CFG_JFFS2_FIRST_BANK	0	    /* use for JFFS2 */
-#define CFG_JFFS2_NUM_BANKS	1	    /* ! second bank contains U-Boot */
+#define CONFIG_SYS_JFFS2_FIRST_BANK	0	    /* use for JFFS2 */
+#define CONFIG_SYS_JFFS2_NUM_BANKS	1	    /* ! second bank contains U-Boot */
 #endif
 
 /*-----------------------------------------------------------------------
  * Environment Variable setup
  */
-#define CFG_ENV_IS_IN_EEPROM	1	/* use EEPROM for environment vars */
-#define CFG_ENV_OFFSET		0x100	/* environment starts at the beginning of the EEPROM */
-#define CFG_ENV_SIZE		0x700	/* 2048 bytes may be used for env vars*/
+#define CONFIG_ENV_IS_IN_EEPROM	1	/* use EEPROM for environment vars */
+#define CONFIG_ENV_OFFSET		0x100	/* environment starts at the beginning of the EEPROM */
+#define CONFIG_ENV_SIZE		0x700	/* 2048 bytes may be used for env vars*/
 				   /* total size of a CAT24WC16 is 2048 bytes */
 
-#define CFG_NVRAM_BASE_ADDR	0xF0000500		/* NVRAM base address	*/
-#define CFG_NVRAM_SIZE		242			/* NVRAM size		*/
+#define CONFIG_SYS_NVRAM_BASE_ADDR	0xF0000500		/* NVRAM base address	*/
+#define CONFIG_SYS_NVRAM_SIZE		242			/* NVRAM size		*/
 
 /*-----------------------------------------------------------------------
  * I2C EEPROM (CAT24WC16) for environment
  */
 #define CONFIG_HARD_I2C			/* I2c with hardware support */
-#define CFG_I2C_SPEED		400000	/* I2C speed and slave address */
-#define CFG_I2C_SLAVE		0x7F
+#define CONFIG_SYS_I2C_SPEED		400000	/* I2C speed and slave address */
+#define CONFIG_SYS_I2C_SLAVE		0x7F
 
-#define CFG_I2C_EEPROM_ADDR	0x50	/* EEPROM CAT28WC08		*/
-#define CFG_I2C_EEPROM_ADDR_LEN 1	/* Bytes of address		*/
+#define CONFIG_SYS_I2C_EEPROM_ADDR	0x50	/* EEPROM CAT28WC08		*/
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1	/* Bytes of address		*/
 /* mask of address bits that overflow into the "EEPROM chip address"	*/
-#define CFG_I2C_EEPROM_ADDR_OVERFLOW	0x07
-#define CFG_EEPROM_PAGE_WRITE_BITS 4	/* The Catalyst CAT24WC08 has	*/
+#define CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW	0x07
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 4	/* The Catalyst CAT24WC08 has	*/
 					/* 16 byte page write mode using*/
 					/* last 4 bits of the address	*/
-#define CFG_EEPROM_PAGE_WRITE_DELAY_MS	10   /* and takes up to 10 msec */
-#define CFG_EEPROM_PAGE_WRITE_ENABLE
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	10   /* and takes up to 10 msec */
 
 /*
  * Init Memory Controller:
@@ -271,21 +271,21 @@
  */
 
 /* Memory Bank 0 (Flash Bank 0, NOR-FLASH) initialization			*/
-#define CFG_EBC_PB0AP		0x92015480
-/*#define CFG_EBC_PB0AP		  0x08055880  /XXX* TWT=16,CSN=1,OEN=1,WBN=1,WBF=1,TH=4,SOR=1 */
-#define CFG_EBC_PB0CR		0xFFC5A000  /* BAS=0xFFC,BS=4MB,BU=R/W,BW=16bit */
+#define CONFIG_SYS_EBC_PB0AP		0x92015480
+/*#define CONFIG_SYS_EBC_PB0AP		  0x08055880  /XXX* TWT=16,CSN=1,OEN=1,WBN=1,WBF=1,TH=4,SOR=1 */
+#define CONFIG_SYS_EBC_PB0CR		0xFFC5A000  /* BAS=0xFFC,BS=4MB,BU=R/W,BW=16bit */
 
 /* Memory Bank 1 (Flash Bank 1, NAND-FLASH) initialization			*/
-#define CFG_EBC_PB1AP		0x92015480
-#define CFG_EBC_PB1CR		0xF4018000  /* BAS=0xF40,BS=1MB,BU=R/W,BW=8bit	*/
+#define CONFIG_SYS_EBC_PB1AP		0x92015480
+#define CONFIG_SYS_EBC_PB1CR		0xF4018000  /* BAS=0xF40,BS=1MB,BU=R/W,BW=8bit	*/
 
 /* Memory Bank 2 (8 Bit Peripheral: CAN, UART, RTC) initialization		*/
-#define CFG_EBC_PB2AP		0x010053C0  /* BWT=2,WBN=1,WBF=1,TH=1,RE=1,SOR=1,BEM=1 */
-#define CFG_EBC_PB2CR		0xF0018000  /* BAS=0xF00,BS=1MB,BU=R/W,BW=8bit	*/
+#define CONFIG_SYS_EBC_PB2AP		0x010053C0  /* BWT=2,WBN=1,WBF=1,TH=1,RE=1,SOR=1,BEM=1 */
+#define CONFIG_SYS_EBC_PB2CR		0xF0018000  /* BAS=0xF00,BS=1MB,BU=R/W,BW=8bit	*/
 
 /* Memory Bank 3 (16 Bit Peripheral: FPGA internal, dig. IO) initialization	*/
-#define CFG_EBC_PB3AP		0x010053C0  /* BWT=2,WBN=1,WBF=1,TH=1,RE=1,SOR=1,BEM=1 */
-#define CFG_EBC_PB3CR		0xF011A000  /* BAS=0xF01,BS=1MB,BU=R/W,BW=16bit */
+#define CONFIG_SYS_EBC_PB3AP		0x010053C0  /* BWT=2,WBN=1,WBF=1,TH=1,RE=1,SOR=1,BEM=1 */
+#define CONFIG_SYS_EBC_PB3CR		0xF011A000  /* BAS=0xF01,BS=1MB,BU=R/W,BW=16bit */
 
 #define CAN_BA		0xF0000000	    /* CAN Base Address			*/
 #define DUART0_BA	0xF0000400	    /* DUART Base Address		*/
@@ -293,36 +293,36 @@
 #define DUART2_BA	0xF0000410	    /* DUART Base Address		*/
 #define DUART3_BA	0xF0000418	    /* DUART Base Address		*/
 #define RTC_BA		0xF0000500	    /* RTC Base Address			*/
-#define CFG_NAND_BASE	0xF4000000
+#define CONFIG_SYS_NAND_BASE	0xF4000000
 
 /*-----------------------------------------------------------------------
  * FPGA stuff
  */
-#define CFG_FPGA_SPARTAN2	1	    /* using Xilinx Spartan 2 now    */
-#define CFG_FPGA_MAX_SIZE	128*1024    /* 128kByte is enough for XC2S50E*/
+#define CONFIG_SYS_FPGA_SPARTAN2	1	    /* using Xilinx Spartan 2 now    */
+#define CONFIG_SYS_FPGA_MAX_SIZE	128*1024    /* 128kByte is enough for XC2S50E*/
 
 /* FPGA program pin configuration */
-#define CFG_FPGA_PRG		0x04000000  /* FPGA program pin (ppc output) */
-#define CFG_FPGA_CLK		0x02000000  /* FPGA clk pin (ppc output)     */
-#define CFG_FPGA_DATA		0x01000000  /* FPGA data pin (ppc output)    */
-#define CFG_FPGA_INIT		0x00010000  /* FPGA init pin (ppc input)     */
-#define CFG_FPGA_DONE		0x00008000  /* FPGA done pin (ppc input)     */
+#define CONFIG_SYS_FPGA_PRG		0x04000000  /* FPGA program pin (ppc output) */
+#define CONFIG_SYS_FPGA_CLK		0x02000000  /* FPGA clk pin (ppc output)     */
+#define CONFIG_SYS_FPGA_DATA		0x01000000  /* FPGA data pin (ppc output)    */
+#define CONFIG_SYS_FPGA_INIT		0x00010000  /* FPGA init pin (ppc input)     */
+#define CONFIG_SYS_FPGA_DONE		0x00008000  /* FPGA done pin (ppc input)     */
 
 /*-----------------------------------------------------------------------
  * Definitions for initial stack pointer and data area (in data cache)
  */
 /* use on chip memory ( OCM ) for temperary stack until sdram is tested */
-#define CFG_TEMP_STACK_OCM	  1
+#define CONFIG_SYS_TEMP_STACK_OCM	  1
 
 /* On Chip Memory location */
-#define CFG_OCM_DATA_ADDR	0xF8000000
-#define CFG_OCM_DATA_SIZE	0x1000
-#define CFG_INIT_RAM_ADDR	CFG_OCM_DATA_ADDR /* inside of SDRAM		*/
-#define CFG_INIT_RAM_END	CFG_OCM_DATA_SIZE /* End of used area in RAM	*/
+#define CONFIG_SYS_OCM_DATA_ADDR	0xF8000000
+#define CONFIG_SYS_OCM_DATA_SIZE	0x1000
+#define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_OCM_DATA_ADDR /* inside of SDRAM		*/
+#define CONFIG_SYS_INIT_RAM_END	CONFIG_SYS_OCM_DATA_SIZE /* End of used area in RAM	*/
 
-#define CFG_GBL_DATA_SIZE      128  /* size in bytes reserved for initial data */
-#define CFG_GBL_DATA_OFFSET    (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_GBL_DATA_SIZE      128  /* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET    (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
 /*-----------------------------------------------------------------------
  * Definitions for GPIO setup (PPC405EP specific)
@@ -336,15 +336,15 @@
  * GPIO0[28-29] - UART1 data signal input/output
  * GPIO0[30-31] - EMAC0 and EMAC1 reject packet inputs
  */
-#define CFG_GPIO0_OSRH		0x40000550
-#define CFG_GPIO0_OSRL		0x00000110
-#define CFG_GPIO0_ISR1H		0x00000000
-#define CFG_GPIO0_ISR1L		0x15555445
-#define CFG_GPIO0_TSRH		0x00000000
-#define CFG_GPIO0_TSRL		0x00000000
-#define CFG_GPIO0_TCR		0xF7FE0014
-
-#define CFG_DUART_RST		(0x80000000 >> 14)
+#define CONFIG_SYS_GPIO0_OSRH		0x40000550
+#define CONFIG_SYS_GPIO0_OSRL		0x00000110
+#define CONFIG_SYS_GPIO0_ISR1H		0x00000000
+#define CONFIG_SYS_GPIO0_ISR1L		0x15555445
+#define CONFIG_SYS_GPIO0_TSRH		0x00000000
+#define CONFIG_SYS_GPIO0_TSRL		0x00000000
+#define CONFIG_SYS_GPIO0_TCR		0xF7FE0014
+
+#define CONFIG_SYS_DUART_RST		(0x80000000 >> 14)
 
 /*
  * Internal Definitions
diff --git a/include/configs/ATUM8548.h b/include/configs/ATUM8548.h
index 5bc28f18f..7ee05e565 100644
--- a/include/configs/ATUM8548.h
+++ b/include/configs/ATUM8548.h
@@ -67,7 +67,6 @@
  */
 #define CONFIG_L2_CACHE			/* toggle L2 cache */
 #define CONFIG_BTB			/* toggle branch predition */
-#define CONFIG_ADDR_STREAMING		/* toggle addr streaming */
 #define CONFIG_CLEAR_LAW0		/* Clear LAW0 in cpu_init_r */
 
 /*
@@ -79,23 +78,23 @@
 
 #define CONFIG_CMD_SDRAM		1	/* SDRAM DIMM SPD info printout */
 #define CONFIG_ENABLE_36BIT_PHYS	1
-#undef	CFG_DRAM_TEST
-#define CFG_MEMTEST_START	0x00200000	/* memtest works on */
-#define CFG_MEMTEST_END		0x00400000
+#undef	CONFIG_SYS_DRAM_TEST
+#define CONFIG_SYS_MEMTEST_START	0x00200000	/* memtest works on */
+#define CONFIG_SYS_MEMTEST_END		0x00400000
 
 /*
  * Base addresses -- Note these are effective addresses where the
  * actual resources get mapped (not physical addresses)
  */
-#define CFG_CCSRBAR_DEFAULT	0xff700000	/* CCSRBAR Default */
-#define CFG_CCSRBAR		0xe0000000	/* relocated CCSRBAR */
-#define CFG_CCSRBAR_PHYS	CFG_CCSRBAR	/* physical addr of CCSRBAR */
-#define CFG_IMMR		CFG_CCSRBAR	/* PQII uses CFG_IMMR */
+#define CONFIG_SYS_CCSRBAR_DEFAULT	0xff700000	/* CCSRBAR Default */
+#define CONFIG_SYS_CCSRBAR		0xe0000000	/* relocated CCSRBAR */
+#define CONFIG_SYS_CCSRBAR_PHYS	CONFIG_SYS_CCSRBAR	/* physical addr of CCSRBAR */
+#define CONFIG_SYS_IMMR		CONFIG_SYS_CCSRBAR	/* PQII uses CONFIG_SYS_IMMR */
 
 #define PCI_SPEED		33333000        /* CPLD currenlty does not have PCI setup info */
-#define CFG_PCI1_ADDR	(CFG_CCSRBAR+0x8000)
-#define CFG_PCI2_ADDR	(CFG_CCSRBAR+0x9000)
-#define CFG_PCIE1_ADDR	(CFG_CCSRBAR+0xa000)
+#define CONFIG_SYS_PCI1_ADDR	(CONFIG_SYS_CCSRBAR+0x8000)
+#define CONFIG_SYS_PCI2_ADDR	(CONFIG_SYS_CCSRBAR+0x9000)
+#define CONFIG_SYS_PCIE1_ADDR	(CONFIG_SYS_CCSRBAR+0xa000)
 
 /* DDR Setup */
 #define CONFIG_FSL_DDR2
@@ -107,8 +106,8 @@
 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER	/* DDR controller or DMA? */
 #define CONFIG_MEM_INIT_VALUE	0xDeadBeef
 
-#define CFG_DDR_SDRAM_BASE	0x00000000
-#define CFG_SDRAM_BASE		CFG_DDR_SDRAM_BASE
+#define CONFIG_SYS_DDR_SDRAM_BASE	0x00000000
+#define CONFIG_SYS_SDRAM_BASE		CONFIG_SYS_DDR_SDRAM_BASE
 #define CONFIG_VERY_BIG_RAM
 
 #define CONFIG_NUM_DDR_CONTROLLERS	1
@@ -119,15 +118,15 @@
 #define SPD_EEPROM_ADDRESS	0x51	/* CTLR 0 DIMM 0 */
 
 /* Manually set up DDR parameters */
-#define CFG_SDRAM_SIZE	1024		/* DDR is 1024MB */
-#define CFG_DDR_CS0_BNDS	0x0000000f	/* 0-1024 */
-#define CFG_DDR_CS0_CONFIG	0x80000102
-#define CFG_DDR_TIMING_0	0x00260802
-#define CFG_DDR_TIMING_1	0x38355322
-#define CFG_DDR_TIMING_2	0x039048c7
-#define CFG_DDR_CONTROL	0xc2000000	/* unbuffered,no DYN_PWR */
-#define CFG_DDR_MODE	0x00000432
-#define CFG_DDR_INTERVAL	0x05150100
+#define CONFIG_SYS_SDRAM_SIZE	1024		/* DDR is 1024MB */
+#define CONFIG_SYS_DDR_CS0_BNDS	0x0000000f	/* 0-1024 */
+#define CONFIG_SYS_DDR_CS0_CONFIG	0x80000102
+#define CONFIG_SYS_DDR_TIMING_0	0x00260802
+#define CONFIG_SYS_DDR_TIMING_1	0x38355322
+#define CONFIG_SYS_DDR_TIMING_2	0x039048c7
+#define CONFIG_SYS_DDR_CONTROL	0xc2000000	/* unbuffered,no DYN_PWR */
+#define CONFIG_SYS_DDR_MODE	0x00000432
+#define CONFIG_SYS_DDR_INTERVAL	0x05150100
 #define DDR_SDRAM_CFG	0x43000000
 
 #undef CONFIG_CLOCKS_IN_MHZ
@@ -164,63 +163,63 @@
  * 1111 1000 0000 0000 0000 1110 0110 0101 = f8000E65    ORx
  */
 
-#define CFG_BOOT_BLOCK		0xf8000000	/* boot TLB block */
-#define CFG_FLASH_BASE		CFG_BOOT_BLOCK	/* start of FLASH 128M */
+#define CONFIG_SYS_BOOT_BLOCK		0xf8000000	/* boot TLB block */
+#define CONFIG_SYS_FLASH_BASE		CONFIG_SYS_BOOT_BLOCK	/* start of FLASH 128M */
 
-#define CFG_BR0_PRELIM		0xf8001001
+#define CONFIG_SYS_BR0_PRELIM		0xf8001001
 
-#define	CFG_OR0_PRELIM		0xf8000E65
+#define	CONFIG_SYS_OR0_PRELIM		0xf8000E65
 
-#define CFG_MAX_FLASH_BANKS	1		/* number of banks	*/
-#define CFG_MAX_FLASH_SECT	1024		/* sectors per device */
-#undef	CFG_FLASH_CHECKSUM
-#define CFG_FLASH_ERASE_TOUT	512000	/* Flash Erase Timeout (ms) */
-#define CFG_FLASH_WRITE_TOUT	8000	/* Flash Write Timeout (ms) */
+#define CONFIG_SYS_MAX_FLASH_BANKS	1		/* number of banks	*/
+#define CONFIG_SYS_MAX_FLASH_SECT	1024		/* sectors per device */
+#undef	CONFIG_SYS_FLASH_CHECKSUM
+#define CONFIG_SYS_FLASH_ERASE_TOUT	512000	/* Flash Erase Timeout (ms) */
+#define CONFIG_SYS_FLASH_WRITE_TOUT	8000	/* Flash Write Timeout (ms) */
 
 
-#define CFG_MONITOR_BASE	TEXT_BASE	/* start of monitor */
+#define CONFIG_SYS_MONITOR_BASE	TEXT_BASE	/* start of monitor */
 
 #define CONFIG_FLASH_CFI_DRIVER    1
-#define CFG_FLASH_CFI           1
-#define CFG_FLASH_EMPTY_INFO
+#define CONFIG_SYS_FLASH_CFI           1
+#define CONFIG_SYS_FLASH_EMPTY_INFO
 
 /*
  * Flash on the LocalBus
  */
-#define CFG_LBC_CACHE_BASE	0xf0000000	/* Localbus cacheable	 */
+#define CONFIG_SYS_LBC_CACHE_BASE	0xf0000000	/* Localbus cacheable	 */
 
 /* Memory */
-#define CFG_INIT_RAM_LOCK	1
-#define CFG_INIT_RAM_ADDR	0xe4010000	/* Initial RAM address */
-#define CFG_INIT_RAM_END	0x4000		/* End of used area in RAM */
+#define CONFIG_SYS_INIT_RAM_LOCK	1
+#define CONFIG_SYS_INIT_RAM_ADDR	0xe4010000	/* Initial RAM address */
+#define CONFIG_SYS_INIT_RAM_END	0x4000		/* End of used area in RAM */
 
-#define CFG_INIT_L2_ADDR	0xf8f80000	/* relocate boot L2SRAM */
+#define CONFIG_SYS_INIT_L2_ADDR	0xf8f80000	/* relocate boot L2SRAM */
 
-#define CFG_GBL_DATA_SIZE	128		/* num bytes initial data */
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_GBL_DATA_SIZE	128		/* num bytes initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
-#define CFG_MONITOR_LEN		(256 * 1024) /* Reserve 256 kB for Mon */
-#define CFG_MALLOC_LEN		(128 * 1024)	/* Reserved for malloc */
+#define CONFIG_SYS_MONITOR_LEN		(256 * 1024) /* Reserve 256 kB for Mon */
+#define CONFIG_SYS_MALLOC_LEN		(128 * 1024)	/* Reserved for malloc */
 
 /* Serial Port */
 #define CONFIG_CONS_INDEX	1
 #undef	CONFIG_SERIAL_SOFTWARE_FIFO
-#define CFG_NS16550
-#define CFG_NS16550_SERIAL
-#define CFG_NS16550_REG_SIZE	1
-#define CFG_NS16550_CLK		get_bus_freq(0)
+#define CONFIG_SYS_NS16550
+#define CONFIG_SYS_NS16550_SERIAL
+#define CONFIG_SYS_NS16550_REG_SIZE	1
+#define CONFIG_SYS_NS16550_CLK		get_bus_freq(0)
 
-#define CFG_BAUDRATE_TABLE \
+#define CONFIG_SYS_BAUDRATE_TABLE \
 	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200}
 
-#define CFG_NS16550_COM1	(CFG_CCSRBAR+0x4500)
-#define CFG_NS16550_COM2	(CFG_CCSRBAR+0x4600)
+#define CONFIG_SYS_NS16550_COM1	(CONFIG_SYS_CCSRBAR+0x4500)
+#define CONFIG_SYS_NS16550_COM2	(CONFIG_SYS_CCSRBAR+0x4600)
 
 /* Use the HUSH parser */
-#define CFG_HUSH_PARSER
-#ifdef	CFG_HUSH_PARSER
-#define CFG_PROMPT_HUSH_PS2 "> "
+#define CONFIG_SYS_HUSH_PARSER
+#ifdef	CONFIG_SYS_HUSH_PARSER
+#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
 #endif
 
 /* pass open firmware flat tree */
@@ -233,41 +232,41 @@
 #define CONFIG_FSL_I2C		/* Use FSL common I2C driver */
 #define CONFIG_HARD_I2C		/* I2C with hardware support*/
 #undef	CONFIG_SOFT_I2C		/* I2C bit-banged */
-#define CFG_I2C_SPEED		400000	/* I2C speed and slave address */
-#define CFG_I2C_EEPROM_ADDR	0x57
-#define CFG_I2C_SLAVE		0x7F
-#define CFG_I2C_NOPROBES	{0x69}	/* Don't probe these addrs */
-#define CFG_I2C_OFFSET		0x3000
+#define CONFIG_SYS_I2C_SPEED		400000	/* I2C speed and slave address */
+#define CONFIG_SYS_I2C_EEPROM_ADDR	0x57
+#define CONFIG_SYS_I2C_SLAVE		0x7F
+#define CONFIG_SYS_I2C_NOPROBES	{0x69}	/* Don't probe these addrs */
+#define CONFIG_SYS_I2C_OFFSET		0x3000
 
 /*
  * General PCI
  * Memory space is mapped 1-1, but I/O space must start from 0.
  */
-#define CFG_PCI_PHYS		0x80000000	/* 1G PCI TLB */
+#define CONFIG_SYS_PCI_PHYS		0x80000000	/* 1G PCI TLB */
 
-#define CFG_PCI1_MEM_BASE	0x80000000
-#define CFG_PCI1_MEM_PHYS	CFG_PCI1_MEM_BASE
-#define CFG_PCI1_MEM_SIZE	0x20000000	/* 512M */
-#define CFG_PCI1_IO_BASE	0x00000000
-#define CFG_PCI1_IO_PHYS	0xe2000000
-#define CFG_PCI1_IO_SIZE	0x00100000	/* 1M */
+#define CONFIG_SYS_PCI1_MEM_BASE	0x80000000
+#define CONFIG_SYS_PCI1_MEM_PHYS	CONFIG_SYS_PCI1_MEM_BASE
+#define CONFIG_SYS_PCI1_MEM_SIZE	0x20000000	/* 512M */
+#define CONFIG_SYS_PCI1_IO_BASE	0x00000000
+#define CONFIG_SYS_PCI1_IO_PHYS	0xe2000000
+#define CONFIG_SYS_PCI1_IO_SIZE	0x00100000	/* 1M */
 
 #ifdef CONFIG_PCI2
-#define CFG_PCI2_MEM_BASE	0xC0000000
-#define CFG_PCI2_MEM_PHYS	CFG_PCI2_MEM_BASE
-#define CFG_PCI2_MEM_SIZE	0x20000000	/* 512M */
-#define CFG_PCI2_IO_BASE	0x00000000
-#define CFG_PCI2_IO_PHYS	0xe2800000
-#define CFG_PCI2_IO_SIZE	0x00100000	/* 1M */
+#define CONFIG_SYS_PCI2_MEM_BASE	0xC0000000
+#define CONFIG_SYS_PCI2_MEM_PHYS	CONFIG_SYS_PCI2_MEM_BASE
+#define CONFIG_SYS_PCI2_MEM_SIZE	0x20000000	/* 512M */
+#define CONFIG_SYS_PCI2_IO_BASE	0x00000000
+#define CONFIG_SYS_PCI2_IO_PHYS	0xe2800000
+#define CONFIG_SYS_PCI2_IO_SIZE	0x00100000	/* 1M */
 #endif
 
 #ifdef CONFIG_PCIE1
-#define CFG_PCIE1_MEM_BASE	0xa0000000
-#define CFG_PCIE1_MEM_PHYS	CFG_PCIE1_MEM_BASE
-#define CFG_PCIE1_MEM_SIZE	0x20000000	/* 512M */
-#define CFG_PCIE1_IO_BASE	0x00000000
-#define CFG_PCIE1_IO_PHYS	0xe3000000
-#define CFG_PCIE1_IO_SIZE	0x00100000	/*   1M */
+#define CONFIG_SYS_PCIE1_MEM_BASE	0xa0000000
+#define CONFIG_SYS_PCIE1_MEM_PHYS	CONFIG_SYS_PCIE1_MEM_BASE
+#define CONFIG_SYS_PCIE1_MEM_SIZE	0x20000000	/* 512M */
+#define CONFIG_SYS_PCIE1_IO_BASE	0x00000000
+#define CONFIG_SYS_PCIE1_IO_PHYS	0xe3000000
+#define CONFIG_SYS_PCIE1_IO_SIZE	0x00100000	/*   1M */
 #endif
 
 
@@ -287,11 +286,6 @@
 
 #undef CONFIG_PCI_SCAN_SHOW		/* show pci devices on startup */
 
-/* PCI view of System Memory */
-#define CFG_PCI_MEMORY_BUS	0x00000000
-#define CFG_PCI_MEMORY_PHYS	0x00000000
-#define CFG_PCI_MEMORY_SIZE	0x80000000
-
 #endif	/* CONFIG_PCI */
 
 #if defined(CONFIG_TSEC_ENET)
@@ -333,13 +327,13 @@
 /*
  * Environment
  */
-#define CFG_ENV_IS_IN_FLASH	1
-#define CFG_ENV_ADDR		(CFG_MONITOR_BASE + 0x40000)
-#define CFG_ENV_SECT_SIZE	0x40000	/* 256K(one sector) for env */
-#define CFG_ENV_SIZE		0x2000
+#define CONFIG_ENV_IS_IN_FLASH	1
+#define CONFIG_ENV_ADDR		(CONFIG_SYS_MONITOR_BASE + 0x40000)
+#define CONFIG_ENV_SECT_SIZE	0x40000	/* 256K(one sector) for env */
+#define CONFIG_ENV_SIZE		0x2000
 
 #define CONFIG_LOADS_ECHO	1	/* echo on for serial download */
-#define CFG_LOADS_BAUD_CHANGE	1	/* allow baudrate change */
+#define CONFIG_SYS_LOADS_BAUD_CHANGE	1	/* allow baudrate change */
 
 /*
  * BOOTP options
@@ -369,25 +363,25 @@
 /*
  * Miscellaneous configurable options
  */
-#define CFG_LONGHELP			/* undef to save memory	*/
-#define CFG_LOAD_ADDR	0x2000000	/* default load address */
-#define CFG_PROMPT	"=> "		/* Monitor Command Prompt */
+#define CONFIG_SYS_LONGHELP			/* undef to save memory	*/
+#define CONFIG_SYS_LOAD_ADDR	0x2000000	/* default load address */
+#define CONFIG_SYS_PROMPT	"=> "		/* Monitor Command Prompt */
 #if defined(CONFIG_CMD_KGDB)
-#define CFG_CBSIZE	1024		/* Console I/O Buffer Size */
+#define CONFIG_SYS_CBSIZE	1024		/* Console I/O Buffer Size */
 #else
-#define CFG_CBSIZE	256		/* Console I/O Buffer Size */
+#define CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size */
 #endif
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define CFG_MAXARGS	16		/* max number of command args */
-#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size */
-#define CFG_HZ		1000		/* decrementer freq: 1ms ticks */
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS	16		/* max number of command args */
+#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size */
+#define CONFIG_SYS_HZ		1000		/* decrementer freq: 1ms ticks */
 
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define CFG_BOOTMAPSZ	(8 << 20)	/* Initial Memory map for Linux*/
+#define CONFIG_SYS_BOOTMAPSZ	(8 << 20)	/* Initial Memory map for Linux*/
 
 /*
  * Internal Definitions
diff --git a/include/configs/Adder.h b/include/configs/Adder.h
index 07a9f4e93..e4d30a155 100644
--- a/include/configs/Adder.h
+++ b/include/configs/Adder.h
@@ -41,18 +41,18 @@
 #define CONFIG_HAS_ETH1
 
 #if defined(CONFIG_ETHER_ON_FEC1) || defined(CONFIG_ETHER_ON_FEC2)
-#define CFG_DISCOVER_PHY
+#define CONFIG_SYS_DISCOVER_PHY
 #define CONFIG_MII_INIT		1
 #define FEC_ENET
 #endif /* CONFIG_ETHER_ON_FEC || CONFIG_ETHER_ON_FEC2 */
 
 #define CONFIG_8xx_OSCLK		10000000 /* 10 MHz oscillator on EXTCLK */
 #define CONFIG_8xx_CPUCLK_DEFAULT	50000000
-#define CFG_8xx_CPUCLK_MIN		40000000
+#define CONFIG_SYS_8xx_CPUCLK_MIN		40000000
 #ifdef CONFIG_MPC852T
-#define CFG_8xx_CPUCLK_MAX		50000000
+#define CONFIG_SYS_8xx_CPUCLK_MAX		50000000
 #else
-#define CFG_8xx_CPUCLK_MAX		133000000
+#define CONFIG_SYS_8xx_CPUCLK_MAX		133000000
 #endif /* CONFIG_MPC852T */
 
 
@@ -86,28 +86,28 @@
 /*-----------------------------------------------------------------------
  * Miscellaneous configurable options
  */
-#define CFG_PROMPT		"=> "		/* Monitor Command Prompt	*/
-#define CFG_HUSH_PARSER
-#define CFG_PROMPT_HUSH_PS2	"> "
-#define CFG_LONGHELP				/* #undef to save memory	*/
-#define CFG_CBSIZE		256		/* Console I/O Buffer Size	*/
-#define CFG_PBSIZE (CFG_CBSIZE + sizeof(CFG_PROMPT) + 16)  /* Print Buffer Size */
-#define CFG_MAXARGS		16		/* Max number of command args	*/
-#define CFG_BARGSIZE		CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+#define CONFIG_SYS_PROMPT		"=> "		/* Monitor Command Prompt	*/
+#define CONFIG_SYS_HUSH_PARSER
+#define CONFIG_SYS_PROMPT_HUSH_PS2	"> "
+#define CONFIG_SYS_LONGHELP				/* #undef to save memory	*/
+#define CONFIG_SYS_CBSIZE		256		/* Console I/O Buffer Size	*/
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)  /* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS		16		/* Max number of command args	*/
+#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
 
-#define CFG_LOAD_ADDR		0x400000	/* Default load address		*/
+#define CONFIG_SYS_LOAD_ADDR		0x400000	/* Default load address		*/
 
-#define CFG_HZ			1000		/* Decrementer freq: 1 ms ticks	*/
+#define CONFIG_SYS_HZ			1000		/* Decrementer freq: 1 ms ticks	*/
 
-#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
 
 /*-----------------------------------------------------------------------
- * RAM configuration (note that CFG_SDRAM_BASE must be zero)
+ * RAM configuration (note that CONFIG_SYS_SDRAM_BASE must be zero)
  */
-#define CFG_SDRAM_BASE		0x00000000
-#define CFG_SDRAM_MAX_SIZE	0x01000000	/* Up to 16 Mbyte		*/
+#define CONFIG_SYS_SDRAM_BASE		0x00000000
+#define CONFIG_SYS_SDRAM_MAX_SIZE	0x01000000	/* Up to 16 Mbyte		*/
 
-#define CFG_MAMR		0x00002114
+#define CONFIG_SYS_MAMR		0x00002114
 
 /*
  * 4096	Up to 4096 SDRAM rows
@@ -116,96 +116,96 @@
  * 4	Number of refresh cycles per period
  * 64	Refresh cycle in ms per number of rows
  */
-#define CFG_PTA_PER_CLK		((4096 * 32 * 1000) / (4 * 64))
+#define CONFIG_SYS_PTA_PER_CLK		((4096 * 32 * 1000) / (4 * 64))
 
-#define CFG_MEMTEST_START	0x00100000	/* memtest works on		*/
-#define CFG_MEMTEST_END		0x00500000	/* 1 ... 5 MB in SDRAM		*/
+#define CONFIG_SYS_MEMTEST_START	0x00100000	/* memtest works on		*/
+#define CONFIG_SYS_MEMTEST_END		0x00500000	/* 1 ... 5 MB in SDRAM		*/
 
-#define CFG_RESET_ADDRESS	0x09900000
+#define CONFIG_SYS_RESET_ADDRESS	0x09900000
 
 /*-----------------------------------------------------------------------
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
+#define CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
 
-#define CFG_MONITOR_BASE	TEXT_BASE
-#define CFG_MONITOR_LEN		(256 << 10)	/* Reserve 256 KB for Monitor   */
+#define CONFIG_SYS_MONITOR_BASE	TEXT_BASE
+#define CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 256 KB for Monitor   */
 #ifdef CONFIG_BZIP2
-#define CFG_MALLOC_LEN		(2500 << 10)	/* Reserve ~2.5 MB for malloc() */
+#define CONFIG_SYS_MALLOC_LEN		(2500 << 10)	/* Reserve ~2.5 MB for malloc() */
 #else
-#define CFG_MALLOC_LEN		(128 << 10)	/* Reserve 128 KB for malloc()  */
+#define CONFIG_SYS_MALLOC_LEN		(128 << 10)	/* Reserve 128 KB for malloc()  */
 #endif /* CONFIG_BZIP2 */
 
 /*-----------------------------------------------------------------------
  * Flash organisation
  */
-#define CFG_FLASH_BASE		0xFE000000
-#define CFG_FLASH_CFI				/* The flash is CFI compatible  */
+#define CONFIG_SYS_FLASH_BASE		0xFE000000
+#define CONFIG_SYS_FLASH_CFI				/* The flash is CFI compatible  */
 #define CONFIG_FLASH_CFI_DRIVER			/* Use common CFI driver        */
-#define CFG_MAX_FLASH_BANKS	1		/* Max number of flash banks	*/
-#define CFG_MAX_FLASH_SECT	128		/* Max num of sects on one chip */
+#define CONFIG_SYS_MAX_FLASH_BANKS	1		/* Max number of flash banks	*/
+#define CONFIG_SYS_MAX_FLASH_SECT	128		/* Max num of sects on one chip */
 
 /* Environment is in flash */
-#define CFG_ENV_IS_IN_FLASH
-#define CFG_ENV_SECT_SIZE	0x10000		/* We use one complete sector	*/
-#define CFG_ENV_ADDR		(CFG_MONITOR_BASE + CFG_MONITOR_LEN)
+#define CONFIG_ENV_IS_IN_FLASH
+#define CONFIG_ENV_SECT_SIZE	0x10000		/* We use one complete sector	*/
+#define CONFIG_ENV_ADDR		(CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)
 
 #define CONFIG_ENV_OVERWRITE
 
-#define CFG_OR0_PRELIM		0xFF000774
-#define CFG_BR0_PRELIM		(CFG_FLASH_BASE | BR_PS_16 | BR_MS_GPCM | BR_V)
+#define CONFIG_SYS_OR0_PRELIM		0xFF000774
+#define CONFIG_SYS_BR0_PRELIM		(CONFIG_SYS_FLASH_BASE | BR_PS_16 | BR_MS_GPCM | BR_V)
 
-#define	CFG_DIRECT_FLASH_TFTP
+#define	CONFIG_SYS_DIRECT_FLASH_TFTP
 
 /*-----------------------------------------------------------------------
  * Internal Memory Map Register
  */
-#define CFG_IMMR		0xFF000000
+#define CONFIG_SYS_IMMR		0xFF000000
 
 /*-----------------------------------------------------------------------
  * Definitions for initial stack pointer and data area (in DPRAM)
  */
-#define CFG_INIT_RAM_ADDR	CFG_IMMR
-#define CFG_INIT_RAM_END	0x2F00		/* End of used area in DPRAM	*/
-#define CFG_GBL_DATA_SIZE	128  /* Size in bytes reserved for initial data */
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_IMMR
+#define CONFIG_SYS_INIT_RAM_END	0x2F00		/* End of used area in DPRAM	*/
+#define CONFIG_SYS_GBL_DATA_SIZE	128  /* Size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
 /*-----------------------------------------------------------------------
  * Configuration registers
  */
 #ifdef CONFIG_WATCHDOG
-#define CFG_SYPCR		(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME  | \
+#define CONFIG_SYS_SYPCR		(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME  | \
 				 SYPCR_SWF  | SYPCR_SWE | SYPCR_SWRI | \
 				 SYPCR_SWP)
 #else
-#define CFG_SYPCR		(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME  | \
+#define CONFIG_SYS_SYPCR		(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME  | \
 				 SYPCR_SWF  | SYPCR_SWP)
 #endif /* CONFIG_WATCHDOG */
 
-#define CFG_SIUMCR		(SIUMCR_MLRC01 | SIUMCR_DBGC11)
+#define CONFIG_SYS_SIUMCR		(SIUMCR_MLRC01 | SIUMCR_DBGC11)
 
 /* TBSCR - Time Base Status and Control Register */
-#define CFG_TBSCR		(TBSCR_TBF | TBSCR_TBE)
+#define CONFIG_SYS_TBSCR		(TBSCR_TBF | TBSCR_TBE)
 
 /* PISCR - Periodic Interrupt Status and Control */
-#define CFG_PISCR		(PISCR_PS | PISCR_PITF)
+#define CONFIG_SYS_PISCR		(PISCR_PS | PISCR_PITF)
 
 /* PLPRCR - PLL, Low-Power, and Reset Control Register */
-/* #define CFG_PLPRCR		PLPRCR_TEXPS */
+/* #define CONFIG_SYS_PLPRCR		PLPRCR_TEXPS */
 
 /* SCCR - System Clock and reset Control Register */
 #define SCCR_MASK		SCCR_EBDF11
-#define CFG_SCCR		SCCR_RTSEL
+#define CONFIG_SYS_SCCR		SCCR_RTSEL
 
-#define CFG_DER			0
+#define CONFIG_SYS_DER			0
 
 /*-----------------------------------------------------------------------
  * Cache Configuration
  */
-#define CFG_CACHELINE_SIZE	16	/* For all MPC8xx chips			*/
+#define CONFIG_SYS_CACHELINE_SIZE	16	/* For all MPC8xx chips			*/
 
 /*-----------------------------------------------------------------------
  * Internal Definitions
diff --git a/include/configs/AdderUSB.h b/include/configs/AdderUSB.h
index a4f7f9a28..e4c1c9ca3 100644
--- a/include/configs/AdderUSB.h
+++ b/include/configs/AdderUSB.h
@@ -31,9 +31,9 @@
 
 #define CONFIG_USB_DEVICE		/* Include UDC driver */
 #define CONFIG_USB_TTY			/* Bind the TTY driver to UDC */
-#define CFG_USB_EXTC_CLK 0x02		/* Oscillator on EXTC_CLK 2 */
-#define CFG_USB_BRG_CLK	0x04		/* or use Baud rate generator 0x04 */
-#define CFG_CONSOLE_IS_IN_ENV		/* Console is in env */
+#define CONFIG_SYS_USB_EXTC_CLK 0x02		/* Oscillator on EXTC_CLK 2 */
+#define CONFIG_SYS_USB_BRG_CLK	0x04		/* or use Baud rate generator 0x04 */
+#define CONFIG_SYS_CONSOLE_IS_IN_ENV		/* Console is in env */
 
 /* If you have a USB-IF assigned VendorID then you may wish to define
  * your own vendor specific values either in BoardName.h or directly in
diff --git a/include/configs/Alaska8220.h b/include/configs/Alaska8220.h
index 38b962f82..2581fdfef 100644
--- a/include/configs/Alaska8220.h
+++ b/include/configs/Alaska8220.h
@@ -35,8 +35,8 @@
 
 /* Input clock running at 30Mhz, read Hid1 for the CPU multiplier to
    determine the CPU speed. */
-#define CFG_MPC8220_CLKIN	30000000/* ... running at 30MHz */
-#define CFG_MPC8220_SYSPLL_VCO_MULTIPLIER 16 /* VCO multiplier can't be read from any register */
+#define CONFIG_SYS_MPC8220_CLKIN	30000000/* ... running at 30MHz */
+#define CONFIG_SYS_MPC8220_SYSPLL_VCO_MULTIPLIER 16 /* VCO multiplier can't be read from any register */
 
 #define BOOTFLAG_COLD		0x01	/* Normal Power-On: Boot from FLASH */
 #define BOOTFLAG_WARM		0x02	/* Software reboot	*/
@@ -53,16 +53,16 @@
 
 #ifdef CONFIG_EXTUART_CONSOLE
 #   define CONFIG_CONS_INDEX	1
-#   define CFG_NS16550_SERIAL
-#   define CFG_NS16550
-#   define CFG_NS16550_REG_SIZE 1
-#   define CFG_NS16550_COM1	(CFG_CPLD_BASE + 0x1008)
-#   define CFG_NS16550_CLK	18432000
+#   define CONFIG_SYS_NS16550_SERIAL
+#   define CONFIG_SYS_NS16550
+#   define CONFIG_SYS_NS16550_REG_SIZE 1
+#   define CONFIG_SYS_NS16550_COM1	(CONFIG_SYS_CPLD_BASE + 0x1008)
+#   define CONFIG_SYS_NS16550_CLK	18432000
 #endif
 
 #define CONFIG_BAUDRATE		115200	    /* ... at 115200 bps */
 
-#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
 
 #define CONFIG_TIMESTAMP			/* Print image info with timestamp */
 
@@ -120,155 +120,155 @@
  * I2C configuration
  */
 #define CONFIG_HARD_I2C		1
-#define CFG_I2C_MODULE		1
+#define CONFIG_SYS_I2C_MODULE		1
 
-#define CFG_I2C_SPEED		100000 /* 100 kHz */
-#define CFG_I2C_SLAVE		0x7F
+#define CONFIG_SYS_I2C_SPEED		100000 /* 100 kHz */
+#define CONFIG_SYS_I2C_SLAVE		0x7F
 
 /*
  * EEPROM configuration
  */
-#define CFG_I2C_EEPROM_ADDR		0x52	/* 1011000xb */
-#define CFG_I2C_EEPROM_ADDR_LEN		1
-#define CFG_EEPROM_PAGE_WRITE_BITS	3
-#define CFG_EEPROM_PAGE_WRITE_DELAY_MS	70
+#define CONFIG_SYS_I2C_EEPROM_ADDR		0x52	/* 1011000xb */
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN		1
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS	3
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	70
 /*
-#define CFG_ENV_IS_IN_EEPROM	1
-#define CFG_ENV_OFFSET		0
-#define CFG_ENV_SIZE		256
+#define CONFIG_ENV_IS_IN_EEPROM	1
+#define CONFIG_ENV_OFFSET		0
+#define CONFIG_ENV_SIZE		256
 */
 
-/* If CFG_AMD_BOOT is defined, the the system will boot from AMD.
+/* If CONFIG_SYS_AMD_BOOT is defined, the the system will boot from AMD.
    else undefined it will boot from Intel Strata flash */
-#define CFG_AMD_BOOT		1
+#define CONFIG_SYS_AMD_BOOT		1
 
 /*
  * Flexbus Chipselect configuration
  */
-#if defined (CFG_AMD_BOOT)
-#define CFG_CS0_BASE		0xfff0
-#define CFG_CS0_MASK		0x00080000  /* 512 KB */
-#define CFG_CS0_CTRL		0x003f0d40
-
-#define CFG_CS1_BASE		0xfe00
-#define CFG_CS1_MASK		0x01000000  /* 16 MB */
-#define CFG_CS1_CTRL		0x003f1540
+#if defined (CONFIG_SYS_AMD_BOOT)
+#define CONFIG_SYS_CS0_BASE		0xfff0
+#define CONFIG_SYS_CS0_MASK		0x00080000  /* 512 KB */
+#define CONFIG_SYS_CS0_CTRL		0x003f0d40
+
+#define CONFIG_SYS_CS1_BASE		0xfe00
+#define CONFIG_SYS_CS1_MASK		0x01000000  /* 16 MB */
+#define CONFIG_SYS_CS1_CTRL		0x003f1540
 #else
-#define CFG_CS0_BASE		0xff00
-#define CFG_CS0_MASK		0x01000000  /* 16 MB */
-#define CFG_CS0_CTRL		0x003f1540
+#define CONFIG_SYS_CS0_BASE		0xff00
+#define CONFIG_SYS_CS0_MASK		0x01000000  /* 16 MB */
+#define CONFIG_SYS_CS0_CTRL		0x003f1540
 
-#define CFG_CS1_BASE		0xfe08
-#define CFG_CS1_MASK		0x00080000  /* 512 KB */
-#define CFG_CS1_CTRL		0x003f0d40
+#define CONFIG_SYS_CS1_BASE		0xfe08
+#define CONFIG_SYS_CS1_MASK		0x00080000  /* 512 KB */
+#define CONFIG_SYS_CS1_CTRL		0x003f0d40
 #endif
 
-#define CFG_CS2_BASE		0xf100
-#define CFG_CS2_MASK		0x00040000
-#define CFG_CS2_CTRL		0x003f1140
+#define CONFIG_SYS_CS2_BASE		0xf100
+#define CONFIG_SYS_CS2_MASK		0x00040000
+#define CONFIG_SYS_CS2_CTRL		0x003f1140
 
-#define CFG_CS3_BASE		0xf200
-#define CFG_CS3_MASK		0x00040000
-#define CFG_CS3_CTRL		0x003f1100
+#define CONFIG_SYS_CS3_BASE		0xf200
+#define CONFIG_SYS_CS3_MASK		0x00040000
+#define CONFIG_SYS_CS3_CTRL		0x003f1100
 
 
-#define CFG_FLASH0_BASE		(CFG_CS0_BASE << 16)
-#define CFG_FLASH1_BASE		(CFG_CS1_BASE << 16)
+#define CONFIG_SYS_FLASH0_BASE		(CONFIG_SYS_CS0_BASE << 16)
+#define CONFIG_SYS_FLASH1_BASE		(CONFIG_SYS_CS1_BASE << 16)
 
-#if defined (CFG_AMD_BOOT)
-#define CFG_AMD_BASE		CFG_FLASH0_BASE
-#define CFG_INTEL_BASE		CFG_FLASH1_BASE + 0xf00000
-#define CFG_FLASH_BASE		CFG_AMD_BASE
+#if defined (CONFIG_SYS_AMD_BOOT)
+#define CONFIG_SYS_AMD_BASE		CONFIG_SYS_FLASH0_BASE
+#define CONFIG_SYS_INTEL_BASE		CONFIG_SYS_FLASH1_BASE + 0xf00000
+#define CONFIG_SYS_FLASH_BASE		CONFIG_SYS_AMD_BASE
 #else
-#define CFG_INTEL_BASE		CFG_FLASH0_BASE + 0xf00000
-#define CFG_AMD_BASE		CFG_FLASH1_BASE
-#define CFG_FLASH_BASE		CFG_INTEL_BASE
+#define CONFIG_SYS_INTEL_BASE		CONFIG_SYS_FLASH0_BASE + 0xf00000
+#define CONFIG_SYS_AMD_BASE		CONFIG_SYS_FLASH1_BASE
+#define CONFIG_SYS_FLASH_BASE		CONFIG_SYS_INTEL_BASE
 #endif
 
-#define CFG_CPLD_BASE		(CFG_CS2_BASE << 16)
-#define CFG_FPGA_BASE		(CFG_CS3_BASE << 16)
+#define CONFIG_SYS_CPLD_BASE		(CONFIG_SYS_CS2_BASE << 16)
+#define CONFIG_SYS_FPGA_BASE		(CONFIG_SYS_CS3_BASE << 16)
 
 
-#define CFG_MAX_FLASH_BANKS	4	/* max num of memory banks	*/
-#define CFG_MAX_FLASH_SECT	128	/* max num of sects on one chip */
+#define CONFIG_SYS_MAX_FLASH_BANKS	4	/* max num of memory banks	*/
+#define CONFIG_SYS_MAX_FLASH_SECT	128	/* max num of sects on one chip */
 
-#define CFG_FLASH_ERASE_TOUT	240000	/* Flash Erase Timeout (in ms)	*/
-#define CFG_FLASH_WRITE_TOUT	500	/* Flash Write Timeout (in ms)	*/
-#define CFG_FLASH_LOCK_TOUT	5	/* Timeout for Flash Set Lock Bit (in ms) */
-#define CFG_FLASH_UNLOCK_TOUT	10000	/* Timeout for Flash Clear Lock Bits (in ms) */
-#define CFG_FLASH_PROTECTION		/* "Real" (hardware) sectors protection */
+#define CONFIG_SYS_FLASH_ERASE_TOUT	240000	/* Flash Erase Timeout (in ms)	*/
+#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Flash Write Timeout (in ms)	*/
+#define CONFIG_SYS_FLASH_LOCK_TOUT	5	/* Timeout for Flash Set Lock Bit (in ms) */
+#define CONFIG_SYS_FLASH_UNLOCK_TOUT	10000	/* Timeout for Flash Clear Lock Bits (in ms) */
+#define CONFIG_SYS_FLASH_PROTECTION		/* "Real" (hardware) sectors protection */
 
 #define PHYS_AMD_SECT_SIZE	0x00010000 /*  64 KB sectors (x2) */
 #define PHYS_INTEL_SECT_SIZE	0x00020000 /* 128 KB sectors (x2) */
 
-#define CFG_FLASH_CHECKSUM
+#define CONFIG_SYS_FLASH_CHECKSUM
 /*
  * Environment settings
  */
-#define CFG_ENV_IS_IN_FLASH	1
-#if defined (CFG_AMD_BOOT)
-#define CFG_ENV_ADDR		(CFG_FLASH0_BASE + CFG_CS0_MASK - PHYS_AMD_SECT_SIZE)
-#define CFG_ENV_SIZE		PHYS_AMD_SECT_SIZE
-#define CFG_ENV_SECT_SIZE	PHYS_AMD_SECT_SIZE
-#define CFG_ENV1_ADDR		(CFG_FLASH1_BASE + CFG_CS1_MASK - PHYS_INTEL_SECT_SIZE)
-#define CFG_ENV1_SIZE		PHYS_INTEL_SECT_SIZE
-#define CFG_ENV1_SECT_SIZE	PHYS_INTEL_SECT_SIZE
+#define CONFIG_ENV_IS_IN_FLASH	1
+#if defined (CONFIG_SYS_AMD_BOOT)
+#define CONFIG_ENV_ADDR		(CONFIG_SYS_FLASH0_BASE + CONFIG_SYS_CS0_MASK - PHYS_AMD_SECT_SIZE)
+#define CONFIG_ENV_SIZE		PHYS_AMD_SECT_SIZE
+#define CONFIG_ENV_SECT_SIZE	PHYS_AMD_SECT_SIZE
+#define CONFIG_ENV1_ADDR		(CONFIG_SYS_FLASH1_BASE + CONFIG_SYS_CS1_MASK - PHYS_INTEL_SECT_SIZE)
+#define CONFIG_ENV1_SIZE		PHYS_INTEL_SECT_SIZE
+#define CONFIG_ENV1_SECT_SIZE	PHYS_INTEL_SECT_SIZE
 #else
-#define CFG_ENV_ADDR		(CFG_FLASH0_BASE + CFG_CS0_MASK - PHYS_INTEL_SECT_SIZE)
-#define CFG_ENV_SIZE		PHYS_INTEL_SECT_SIZE
-#define CFG_ENV_SECT_SIZE	PHYS_INTEL_SECT_SIZE
-#define CFG_ENV1_ADDR		(CFG_FLASH1_BASE + CFG_CS1_MASK - PHYS_AMD_SECT_SIZE)
-#define CFG_ENV1_SIZE		PHYS_AMD_SECT_SIZE
-#define CFG_ENV1_SECT_SIZE	PHYS_AMD_SECT_SIZE
+#define CONFIG_ENV_ADDR		(CONFIG_SYS_FLASH0_BASE + CONFIG_SYS_CS0_MASK - PHYS_INTEL_SECT_SIZE)
+#define CONFIG_ENV_SIZE		PHYS_INTEL_SECT_SIZE
+#define CONFIG_ENV_SECT_SIZE	PHYS_INTEL_SECT_SIZE
+#define CONFIG_ENV1_ADDR		(CONFIG_SYS_FLASH1_BASE + CONFIG_SYS_CS1_MASK - PHYS_AMD_SECT_SIZE)
+#define CONFIG_ENV1_SIZE		PHYS_AMD_SECT_SIZE
+#define CONFIG_ENV1_SECT_SIZE	PHYS_AMD_SECT_SIZE
 #endif
 
 #define CONFIG_ENV_OVERWRITE	1
 
-#if defined CFG_ENV_IS_IN_FLASH
-#undef CFG_ENV_IS_IN_NVRAM
-#undef CFG_ENV_IS_IN_EEPROM
-#elif defined CFG_ENV_IS_IN_NVRAM
-#undef CFG_ENV_IS_IN_FLASH
-#undef CFG_ENV_IS_IN_EEPROM
-#elif defined CFG_ENV_IS_IN_EEPROM
-#undef CFG_ENV_IS_IN_NVRAM
-#undef CFG_ENV_IS_IN_FLASH
+#if defined CONFIG_ENV_IS_IN_FLASH
+#undef CONFIG_ENV_IS_IN_NVRAM
+#undef CONFIG_ENV_IS_IN_EEPROM
+#elif defined CONFIG_ENV_IS_IN_NVRAM
+#undef CONFIG_ENV_IS_IN_FLASH
+#undef CONFIG_ENV_IS_IN_EEPROM
+#elif defined CONFIG_ENV_IS_IN_EEPROM
+#undef CONFIG_ENV_IS_IN_NVRAM
+#undef CONFIG_ENV_IS_IN_FLASH
 #endif
 
 /*
  * Memory map
  */
-#define CFG_MBAR		0xF0000000
-#define CFG_SDRAM_BASE		0x00000000
-#define CFG_DEFAULT_MBAR	0x80000000
-#define CFG_SRAM_BASE		(CFG_MBAR + 0x20000)
-#define CFG_SRAM_SIZE		0x8000
+#define CONFIG_SYS_MBAR		0xF0000000
+#define CONFIG_SYS_SDRAM_BASE		0x00000000
+#define CONFIG_SYS_DEFAULT_MBAR	0x80000000
+#define CONFIG_SYS_SRAM_BASE		(CONFIG_SYS_MBAR + 0x20000)
+#define CONFIG_SYS_SRAM_SIZE		0x8000
 
 /* Use SRAM until RAM will be available */
-#define CFG_INIT_RAM_ADDR	(CFG_MBAR + 0x20000)
-#define CFG_INIT_RAM_END	0x8000	/* End of used area in DPRAM */
+#define CONFIG_SYS_INIT_RAM_ADDR	(CONFIG_SYS_MBAR + 0x20000)
+#define CONFIG_SYS_INIT_RAM_END	0x8000	/* End of used area in DPRAM */
 
-#define CFG_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
-#define CFG_MONITOR_BASE	TEXT_BASE
-#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
-#   define CFG_RAMBOOT		1
+#define CONFIG_SYS_MONITOR_BASE	TEXT_BASE
+#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
+#   define CONFIG_SYS_RAMBOOT		1
 #endif
 
-#define CFG_MONITOR_LEN		(256 << 10) /* Reserve 256 kB for Monitor   */
-#define CFG_MALLOC_LEN		(128 << 10) /* Reserve 128 kB for malloc()  */
-#define CFG_BOOTMAPSZ		(8 << 20)   /* Initial Memory map for Linux */
+#define CONFIG_SYS_MONITOR_LEN		(256 << 10) /* Reserve 256 kB for Monitor   */
+#define CONFIG_SYS_MALLOC_LEN		(128 << 10) /* Reserve 128 kB for malloc()  */
+#define CONFIG_SYS_BOOTMAPSZ		(8 << 20)   /* Initial Memory map for Linux */
 
 /* SDRAM configuration */
-#define CFG_SDRAM_TOTAL_BANKS		2
-#define CFG_SDRAM_SPD_I2C_ADDR		0x51		/* 7bit */
-#define CFG_SDRAM_SPD_SIZE		0x40
-#define CFG_SDRAM_CAS_LATENCY		4		/* (CL=2)x2 */
+#define CONFIG_SYS_SDRAM_TOTAL_BANKS		2
+#define CONFIG_SYS_SDRAM_SPD_I2C_ADDR		0x51		/* 7bit */
+#define CONFIG_SYS_SDRAM_SPD_SIZE		0x40
+#define CONFIG_SYS_SDRAM_CAS_LATENCY		4		/* (CL=2)x2 */
 
 /* SDRAM drive strength register */
-#define CFG_SDRAM_DRIVE_STRENGTH	((DRIVE_STRENGTH_LOW  << SDRAMDS_SBE_SHIFT) | \
+#define CONFIG_SYS_SDRAM_DRIVE_STRENGTH	((DRIVE_STRENGTH_LOW  << SDRAMDS_SBE_SHIFT) | \
 					 (DRIVE_STRENGTH_HIGH << SDRAMDS_SBC_SHIFT) | \
 					 (DRIVE_STRENGTH_LOW  << SDRAMDS_SBA_SHIFT) | \
 					 (DRIVE_STRENGTH_OFF  << SDRAMDS_SBS_SHIFT) | \
@@ -285,34 +285,34 @@
 /*
  * Miscellaneous configurable options
  */
-#define CFG_LONGHELP			    /* undef to save memory	*/
-#define CFG_PROMPT		"=> "	    /* Monitor Command Prompt	*/
+#define CONFIG_SYS_LONGHELP			    /* undef to save memory	*/
+#define CONFIG_SYS_PROMPT		"=> "	    /* Monitor Command Prompt	*/
 #if defined(CONFIG_CMD_KGDB)
-#define CFG_CBSIZE		1024	    /* Console I/O Buffer Size	*/
+#define CONFIG_SYS_CBSIZE		1024	    /* Console I/O Buffer Size	*/
 #else
-#define CFG_CBSIZE		256	    /* Console I/O Buffer Size	*/
+#define CONFIG_SYS_CBSIZE		256	    /* Console I/O Buffer Size	*/
 #endif
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16)	/* Print Buffer Size */
-#define CFG_MAXARGS		16	    /* max number of command args   */
-#define CFG_BARGSIZE		CFG_CBSIZE  /* Boot Argument Buffer Size    */
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)	/* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS		16	    /* max number of command args   */
+#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE  /* Boot Argument Buffer Size    */
 
-#define CFG_MEMTEST_START	0x00100000  /* memtest works on */
-#define CFG_MEMTEST_END		0x00f00000  /* 1 ... 15 MB in DRAM  */
+#define CONFIG_SYS_MEMTEST_START	0x00100000  /* memtest works on */
+#define CONFIG_SYS_MEMTEST_END		0x00f00000  /* 1 ... 15 MB in DRAM  */
 
-#define CFG_LOAD_ADDR		0x100000    /* default load address */
+#define CONFIG_SYS_LOAD_ADDR		0x100000    /* default load address */
 
-#define CFG_HZ			1000	    /* decrementer freq: 1 ms ticks */
+#define CONFIG_SYS_HZ			1000	    /* decrementer freq: 1 ms ticks */
 
-#define CFG_CACHELINE_SIZE	32	/* For MPC8220 CPUs */
+#define CONFIG_SYS_CACHELINE_SIZE	32	/* For MPC8220 CPUs */
 #if defined(CONFIG_CMD_KGDB)
-#  define CFG_CACHELINE_SHIFT	5   /* log base 2 of the above value */
+#  define CONFIG_SYS_CACHELINE_SHIFT	5   /* log base 2 of the above value */
 #endif
 
 /*
  * Various low-level settings
  */
-#define CFG_HID0_INIT		HID0_ICE | HID0_ICFI
-#define CFG_HID0_FINAL		HID0_ICE
+#define CONFIG_SYS_HID0_INIT		HID0_ICE | HID0_ICFI
+#define CONFIG_SYS_HID0_FINAL		HID0_ICE
 
 /*
  * JFFS2 partitions
diff --git a/include/configs/AmigaOneG3SE.h b/include/configs/AmigaOneG3SE.h
index 84efd2fe0..b71da1fbf 100644
--- a/include/configs/AmigaOneG3SE.h
+++ b/include/configs/AmigaOneG3SE.h
@@ -50,7 +50,7 @@
 
 #define CONFIG_CONS_INDEX	1
 #define CONFIG_BAUDRATE		9600
-#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
 
 #undef CONFIG_CLOCKS_IN_MHZ		/* clocks passed to Linux in Hz */
 
@@ -100,52 +100,52 @@
 /*
  * Miscellaneous configurable options
  */
-#define CFG_LONGHELP			/* undef to save memory		*/
-#define CFG_PROMPT	"] "		/* Monitor Command Prompt	*/
+#define CONFIG_SYS_LONGHELP			/* undef to save memory		*/
+#define CONFIG_SYS_PROMPT	"] "		/* Monitor Command Prompt	*/
 
-#define CFG_HUSH_PARSER		1	/* use "hush" command parser	*/
-/* #undef CFG_HUSH_PARSER */
-#ifdef	CFG_HUSH_PARSER
-#define CFG_PROMPT_HUSH_PS2	"> "
+#define CONFIG_SYS_HUSH_PARSER		1	/* use "hush" command parser	*/
+/* #undef CONFIG_SYS_HUSH_PARSER */
+#ifdef	CONFIG_SYS_HUSH_PARSER
+#define CONFIG_SYS_PROMPT_HUSH_PS2	"> "
 #endif
-#define CFG_CBSIZE	1024		/* Console I/O Buffer Size	*/
+#define CONFIG_SYS_CBSIZE	1024		/* Console I/O Buffer Size	*/
 
 /* Print Buffer Size
  */
-#define CFG_PBSIZE	(CFG_CBSIZE + sizeof(CFG_PROMPT) + 16)
+#define CONFIG_SYS_PBSIZE	(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
 
-#define CFG_MAXARGS	64		/* max number of command args	*/
-#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size	*/
-#define CFG_LOAD_ADDR	0x00500000	/* Default load address		*/
+#define CONFIG_SYS_MAXARGS	64		/* max number of command args	*/
+#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
+#define CONFIG_SYS_LOAD_ADDR	0x00500000	/* Default load address		*/
 
 /*-----------------------------------------------------------------------
  * Start addresses for the final memory configuration
  * (Set up by the startup code)
- * Please note that CFG_SDRAM_BASE _must_ start at 0
+ * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
  */
-#define CFG_SDRAM_BASE	    0x00000000
-#define CFG_FLASH_BASE	    0xFFF00000
-#define CFG_FLASH_MAX_SIZE  0x00080000
+#define CONFIG_SYS_SDRAM_BASE	    0x00000000
+#define CONFIG_SYS_FLASH_BASE	    0xFFF00000
+#define CONFIG_SYS_FLASH_MAX_SIZE  0x00080000
 /* Maximum amount of RAM.
  */
-#define CFG_MAX_RAM_SIZE    0x80000000	/* 2G			*/
+#define CONFIG_SYS_MAX_RAM_SIZE    0x80000000	/* 2G			*/
 
-#define CFG_RESET_ADDRESS   0xFFF00100
+#define CONFIG_SYS_RESET_ADDRESS   0xFFF00100
 
-#define CFG_MONITOR_BASE    TEXT_BASE
+#define CONFIG_SYS_MONITOR_BASE    TEXT_BASE
 
-#define CFG_MONITOR_LEN	    (768 << 10) /* Reserve 512 kB for Monitor	*/
-#define CFG_MALLOC_LEN	    (2500 << 10) /* Reserve 128 kB for malloc() */
+#define CONFIG_SYS_MONITOR_LEN	    (768 << 10) /* Reserve 512 kB for Monitor	*/
+#define CONFIG_SYS_MALLOC_LEN	    (2500 << 10) /* Reserve 128 kB for malloc() */
 
-#if CFG_MONITOR_BASE >= CFG_SDRAM_BASE && \
-    CFG_MONITOR_BASE < CFG_SDRAM_BASE + CFG_MAX_RAM_SIZE
-#define CFG_RAMBOOT
+#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_SDRAM_BASE && \
+    CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_SDRAM_BASE + CONFIG_SYS_MAX_RAM_SIZE
+#define CONFIG_SYS_RAMBOOT
 #else
-#undef CFG_RAMBOOT
+#undef CONFIG_SYS_RAMBOOT
 #endif
 
-#define CFG_MEMTEST_START	0x00004000	/* memtest works on	*/
-#define CFG_MEMTEST_END		0x02000000	/* 0 ... 32 MB in DRAM	*/
+#define CONFIG_SYS_MEMTEST_START	0x00004000	/* memtest works on	*/
+#define CONFIG_SYS_MEMTEST_END		0x02000000	/* 0 ... 32 MB in DRAM	*/
 
 /*-----------------------------------------------------------------------
  * Definitions for initial stack pointer and data area
@@ -154,115 +154,115 @@
 /* Size in bytes reserved for initial data
  */
 /* HJF: used to be 0x400000 */
-#define CFG_INIT_RAM_ADDR	0x40000000
-#define CFG_INIT_RAM_END	0x8000
-#define CFG_GBL_DATA_SIZE	128
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_INIT_RAM_ADDR	0x40000000
+#define CONFIG_SYS_INIT_RAM_END	0x8000
+#define CONFIG_SYS_GBL_DATA_SIZE	128
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
-#define CFG_INIT_RAM_LOCK
+#define CONFIG_SYS_INIT_RAM_LOCK
 
 /*
  * Temporary buffer for serial data until the real serial driver
  * is initialised (memtest will destroy this buffer)
  */
-#define CFG_SCONSOLE_ADDR     CFG_INIT_RAM_ADDR
-#define CFG_SCONSOLE_SIZE     0x0002000
+#define CONFIG_SYS_SCONSOLE_ADDR     CONFIG_SYS_INIT_RAM_ADDR
+#define CONFIG_SYS_SCONSOLE_SIZE     0x0002000
 
 /* SDRAM 0 - 256MB
  */
 
-/*HJF: #define CFG_IBAT0L (CFG_SDRAM_BASE | BATL_PP_RW | BATL_CACHEINHIBIT)
-#define CFG_IBAT0U (CFG_SDRAM_BASE | BATU_BL_4M | BATU_VS | BATU_VP)
-#define CFG_DBAT0L (CFG_SDRAM_BASE | BATL_PP_RW | BATL_CACHEINHIBIT)
-#define CFG_DBAT0U CFG_IBAT0U*/
+/*HJF: #define CONFIG_SYS_IBAT0L (CONFIG_SYS_SDRAM_BASE | BATL_PP_RW | BATL_CACHEINHIBIT)
+#define CONFIG_SYS_IBAT0U (CONFIG_SYS_SDRAM_BASE | BATU_BL_4M | BATU_VS | BATU_VP)
+#define CONFIG_SYS_DBAT0L (CONFIG_SYS_SDRAM_BASE | BATL_PP_RW | BATL_CACHEINHIBIT)
+#define CONFIG_SYS_DBAT0U CONFIG_SYS_IBAT0U*/
 
-#define CFG_DBAT0L	      (CFG_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
-#define CFG_DBAT0U	      (CFG_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
-#define CFG_IBAT0L      (CFG_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
-#define CFG_IBAT0U      (CFG_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CONFIG_SYS_DBAT0L	      (CONFIG_SYS_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
+#define CONFIG_SYS_DBAT0U	      (CONFIG_SYS_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CONFIG_SYS_IBAT0L      (CONFIG_SYS_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
+#define CONFIG_SYS_IBAT0U      (CONFIG_SYS_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
 /* PCI Range
  */
-#define CFG_DBAT1L	 (0x80000000 | BATL_PP_RW | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
-#define CFG_DBAT1U	 (0x80000000 | BATU_BL_256M | BATU_VS | BATU_VP)
-#define CFG_IBAT1L	 (0x80000000 | BATL_PP_RW | BATL_CACHEINHIBIT)
-#define CFG_IBAT1U	 (0x80000000 | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CONFIG_SYS_DBAT1L	 (0x80000000 | BATL_PP_RW | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
+#define CONFIG_SYS_DBAT1U	 (0x80000000 | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CONFIG_SYS_IBAT1L	 (0x80000000 | BATL_PP_RW | BATL_CACHEINHIBIT)
+#define CONFIG_SYS_IBAT1U	 (0x80000000 | BATU_BL_256M | BATU_VS | BATU_VP)
 /* HJF:
-#define CFG_IBAT1L ((CFG_SDRAM_BASE+CFG_INIT_RAM_ADDR) | BATL_PP_RW)
-#define CFG_IBAT1U ((CFG_SDRAM_BASE+CFG_INIT_RAM_ADDR) | BATU_BL_256M | BATU_VS | BATU_VP)
-#define CFG_DBAT1L ((CFG_SDRAM_BASE+CFG_INIT_RAM_ADDR + 0x20000) | BATL_PP_RW )
-#define CFG_DBAT1U ((CFG_SDRAM_BASE+CFG_INIT_RAM_ADDR + 0x20000) | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CONFIG_SYS_IBAT1L ((CONFIG_SYS_SDRAM_BASE+CONFIG_SYS_INIT_RAM_ADDR) | BATL_PP_RW)
+#define CONFIG_SYS_IBAT1U ((CONFIG_SYS_SDRAM_BASE+CONFIG_SYS_INIT_RAM_ADDR) | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CONFIG_SYS_DBAT1L ((CONFIG_SYS_SDRAM_BASE+CONFIG_SYS_INIT_RAM_ADDR + 0x20000) | BATL_PP_RW )
+#define CONFIG_SYS_DBAT1U ((CONFIG_SYS_SDRAM_BASE+CONFIG_SYS_INIT_RAM_ADDR + 0x20000) | BATU_BL_256M | BATU_VS | BATU_VP)
 */
 
 /* Init RAM in the CPU DCache (no backing memory)
  */
-#define CFG_DBAT2L	(CFG_INIT_RAM_ADDR | BATL_PP_RW | BATL_MEMCOHERENCE)
-#define CFG_DBAT2U	(CFG_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP)
+#define CONFIG_SYS_DBAT2L	(CONFIG_SYS_INIT_RAM_ADDR | BATL_PP_RW | BATL_MEMCOHERENCE)
+#define CONFIG_SYS_DBAT2U	(CONFIG_SYS_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP)
 /* This used to be commented out */
-#define CFG_IBAT2L	  CFG_DBAT2L
+#define CONFIG_SYS_IBAT2L	  CONFIG_SYS_DBAT2L
 /* This here too */
-#define CFG_IBAT2U	  CFG_DBAT2U
+#define CONFIG_SYS_IBAT2U	  CONFIG_SYS_DBAT2U
 
 
 /* I/O and PCI memory at 0xf0000000
  */
-#define CFG_DBAT3L	(0xf0000000 | BATL_PP_RW | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
-#define CFG_DBAT3U	(0xf0000000 | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CONFIG_SYS_DBAT3L	(0xf0000000 | BATL_PP_RW | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
+#define CONFIG_SYS_DBAT3U	(0xf0000000 | BATU_BL_256M | BATU_VS | BATU_VP)
 
-#define CFG_IBAT3L	(0xf0000000 | BATL_PP_RW | BATL_CACHEINHIBIT)
-#define CFG_IBAT3U	(0xf0000000 | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CONFIG_SYS_IBAT3L	(0xf0000000 | BATL_PP_RW | BATL_CACHEINHIBIT)
+#define CONFIG_SYS_IBAT3U	(0xf0000000 | BATU_BL_256M | BATU_VS | BATU_VP)
 
 /*
  * Low Level Configuration Settings
  * (address mappings, register initial values, etc.)
  */
-#define CFG_HZ		1000
-#define CFG_BUS_HZ	133000000 /* bus speed - 100 mhz		*/
-#define CFG_CPU_CLK	133000000
-#define CFG_BUS_CLK	133000000
+#define CONFIG_SYS_HZ		1000
+#define CONFIG_SYS_BUS_HZ	133000000 /* bus speed - 100 mhz		*/
+#define CONFIG_SYS_CPU_CLK	133000000
+#define CONFIG_SYS_BUS_CLK	133000000
 
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define CFG_BOOTMAPSZ	(8 << 20) /* Initial Memory map for Linux */
+#define CONFIG_SYS_BOOTMAPSZ	(8 << 20) /* Initial Memory map for Linux */
 
 /*-----------------------------------------------------------------------
  * FLASH organization
  */
-#define CFG_MAX_FLASH_BANKS	1	/* Max number of flash banks		*/
-#define CFG_MAX_FLASH_SECT	8	/* Max number of sectors in one bank	*/
+#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* Max number of flash banks		*/
+#define CONFIG_SYS_MAX_FLASH_SECT	8	/* Max number of sectors in one bank	*/
 
-#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
-#define CFG_FLASH_WRITE_TOUT	1000	/* Timeout for Flash Write (in ms)	*/
+#define CONFIG_SYS_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
+#define CONFIG_SYS_FLASH_WRITE_TOUT	1000	/* Timeout for Flash Write (in ms)	*/
 
 /*
  * Environment is stored in NVRAM.
  */
-#define CFG_ENV_IS_IN_NVRAM	1
-#define CFG_ENV_ADDR		0xFD0E0000 /* This should be 0xFD0E0000, but we skip bytes to
+#define CONFIG_ENV_IS_IN_NVRAM	1
+#define CONFIG_ENV_ADDR		0xFD0E0000 /* This should be 0xFD0E0000, but we skip bytes to
 					    * protect softex's settings for now.
 					    * Original 768 bytes where not enough.
 					    */
-#define CFG_ENV_SIZE		0x8000	   /* Size of the Environment. See comment above */
+#define CONFIG_ENV_SIZE		0x8000	   /* Size of the Environment. See comment above */
 
-#define CFG_CONSOLE_IS_IN_ENV	1 /* stdin/stdout/stderr are in environment */
-#define CFG_CONSOLE_OVERWRITE_ROUTINE	1
+#define CONFIG_SYS_CONSOLE_IS_IN_ENV	1 /* stdin/stdout/stderr are in environment */
+#define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE	1
 #define CONFIG_ENV_OVERWRITE 1
 
 /*-----------------------------------------------------------------------
  * Cache Configuration
  */
-#define CFG_CACHELINE_SIZE	32
+#define CONFIG_SYS_CACHELINE_SIZE	32
 #if defined(CONFIG_CMD_KGDB)
-#  define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value	*/
+#  define CONFIG_SYS_CACHELINE_SHIFT	5	/* log base 2 of the above value	*/
 #endif
 
 /*
  * L2 cache
  */
-#define CFG_L2
+#define CONFIG_SYS_L2
 #define L2_INIT	  (L2CR_L2SIZ_2M | L2CR_L2CLK_3 | L2CR_L2RAM_BURST | \
 		   L2CR_L2OH_5 | L2CR_L2CTL | L2CR_L2WT)
 #define L2_ENABLE (L2_INIT | L2CR_L2E)
@@ -281,26 +281,26 @@
  */
 
 #define CONFIG_ATAPI		1
-#define CFG_IDE_MAXBUS		2
-#define CFG_IDE_MAXDEVICE	4
+#define CONFIG_SYS_IDE_MAXBUS		2
+#define CONFIG_SYS_IDE_MAXDEVICE	4
 #define CONFIG_ISO_PARTITION	1
 
-#define CFG_ATA_BASE_ADDR	0xFE000000  /* was: via_get_base_addr() */
-#define CFG_ATA_IDE0_OFFSET	0x1F0
-#define CFG_ATA_IDE1_OFFSET	0x170
+#define CONFIG_SYS_ATA_BASE_ADDR	0xFE000000  /* was: via_get_base_addr() */
+#define CONFIG_SYS_ATA_IDE0_OFFSET	0x1F0
+#define CONFIG_SYS_ATA_IDE1_OFFSET	0x170
 
-#define CFG_ATA_REG_OFFSET	0
-#define CFG_ATA_DATA_OFFSET	0
-#define CFG_ATA_ALT_OFFSET	0x0200
+#define CONFIG_SYS_ATA_REG_OFFSET	0
+#define CONFIG_SYS_ATA_DATA_OFFSET	0
+#define CONFIG_SYS_ATA_ALT_OFFSET	0x0200
 
 /*-----------------------------------------------------------------------
  * Disk-On-Chip configuration
  */
 
-#define CFG_MAX_DOC_DEVICE	1	/* Max number of DOC devices		*/
+#define CONFIG_SYS_MAX_DOC_DEVICE	1	/* Max number of DOC devices		*/
 
-#define CFG_DOC_SUPPORT_2000
-#undef CFG_DOC_SUPPORT_MILLENNIUM
+#define CONFIG_SYS_DOC_SUPPORT_2000
+#undef CONFIG_SYS_DOC_SUPPORT_MILLENNIUM
 
 /*-----------------------------------------------------------------------
   RTC
@@ -311,16 +311,16 @@
  * NS16550 Configuration
  */
 
-#define CFG_NS16550
+#define CONFIG_SYS_NS16550
 
-#define CFG_NS16550_COM1 0xFE0003F8
-#define CFG_NS16550_COM2 0xFE0002F8
+#define CONFIG_SYS_NS16550_COM1 0xFE0003F8
+#define CONFIG_SYS_NS16550_COM2 0xFE0002F8
 
-#define CFG_NS16550_REG_SIZE 1
+#define CONFIG_SYS_NS16550_REG_SIZE 1
 
 /* base address for ISA I/O
  */
-#define CFG_ISA_IO_BASE_ADDRESS 0xFE000000
+#define CONFIG_SYS_ISA_IO_BASE_ADDRESS 0xFE000000
 
 /* ISA Interrupt stuff (taken from JWL) */
 
@@ -346,7 +346,7 @@
  */
 
 #define CONFIG_NET_MULTI
-#define CFG_BOARD_ASM_INIT
+#define CONFIG_SYS_BOARD_ASM_INIT
 #define CONFIG_LAST_STAGE_INIT
 
 /* #define CONFIG_ETHADDR	00:09:D2:10:00:76 */
@@ -363,7 +363,7 @@
 #define CONFIG_USB_UHCI		1
 #define CONFIG_USB_STORAGE	1
 #define CONFIG_USB_KEYBOARD	1
-#define CFG_DEVICE_DEREGISTER	1 /* needed by CONFIG_USB_KEYBOARD */
+#define CONFIG_SYS_DEVICE_DEREGISTER	1 /* needed by CONFIG_USB_KEYBOARD */
 
 /*
  * Autoboot stuff
diff --git a/include/configs/B2.h b/include/configs/B2.h
index d6ab1adeb..c77ea1fc4 100644
--- a/include/configs/B2.h
+++ b/include/configs/B2.h
@@ -48,10 +48,10 @@
 /*
  * Size of malloc() pool
  */
-#define CFG_MONITOR_LEN		(256 * 1024)	/* Reserve 256 kB for Monitor	*/
-#define CFG_ENV_SIZE		1024		/* 1024 bytes may be used for env vars*/
-#define CFG_MALLOC_LEN		(CFG_ENV_SIZE + 128*1024 )
-#define CFG_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
+#define CONFIG_SYS_MONITOR_LEN		(256 * 1024)	/* Reserve 256 kB for Monitor	*/
+#define CONFIG_ENV_SIZE		1024		/* 1024 bytes may be used for env vars*/
+#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + 128*1024 )
+#define CONFIG_SYS_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
 
 /*
  * Hardware drivers
@@ -106,24 +106,24 @@
 /*
  * Miscellaneous configurable options
  */
-#define	CFG_LONGHELP				/* undef to save memory		*/
-#define	CFG_PROMPT		"=>  "	/* Monitor Command Prompt	*/
-#define	CFG_CBSIZE		256		/* Console I/O Buffer Size	*/
-#define	CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define	CFG_MAXARGS		16		/* max number of command args	*/
-#define CFG_BARGSIZE		CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+#define	CONFIG_SYS_LONGHELP				/* undef to save memory		*/
+#define	CONFIG_SYS_PROMPT		"=>  "	/* Monitor Command Prompt	*/
+#define	CONFIG_SYS_CBSIZE		256		/* Console I/O Buffer Size	*/
+#define	CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define	CONFIG_SYS_MAXARGS		16		/* max number of command args	*/
+#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
 
-#define CFG_MEMTEST_START	0x0C400000	/* memtest works on	*/
-#define CFG_MEMTEST_END		0x0C800000	/* 4 ... 8 MB in DRAM	*/
+#define CONFIG_SYS_MEMTEST_START	0x0C400000	/* memtest works on	*/
+#define CONFIG_SYS_MEMTEST_END		0x0C800000	/* 4 ... 8 MB in DRAM	*/
 
-#undef  CFG_CLKS_IN_HZ		/* everything, incl board info, in Hz */
+#undef  CONFIG_SYS_CLKS_IN_HZ		/* everything, incl board info, in Hz */
 
-#define	CFG_LOAD_ADDR		0x0c700000	/* default load address	*/
+#define	CONFIG_SYS_LOAD_ADDR		0x0c700000	/* default load address	*/
 
-#define	CFG_HZ				1000		/* 1 kHz */
+#define	CONFIG_SYS_HZ				1000		/* 1 kHz */
 
 						/* valid baudrates */
-#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
 
 /*-----------------------------------------------------------------------
  * Stack sizes
@@ -146,7 +146,7 @@
 #define PHYS_FLASH_1		0x00000000 /* Flash Bank #1 */
 #define PHYS_FLASH_SIZE		0x00400000 /* 4 MB */
 
-#define CFG_FLASH_BASE		PHYS_FLASH_1
+#define CONFIG_SYS_FLASH_BASE		PHYS_FLASH_1
 
 /*-----------------------------------------------------------------------
  * FLASH and environment organization
@@ -154,53 +154,52 @@
 /*-----------------------------------------------------------------------
  * FLASH organization
  */
-#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
-#define CFG_MAX_FLASH_SECT	256	/* max number of sectors on one chip	*/
+#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
+#define CONFIG_SYS_MAX_FLASH_SECT	256	/* max number of sectors on one chip	*/
 
-#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
-#define CFG_FLASH_WRITE_TOUT	1000	/* Timeout for Flash Write (in ms)	*/
+#define CONFIG_SYS_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
+#define CONFIG_SYS_FLASH_WRITE_TOUT	1000	/* Timeout for Flash Write (in ms)	*/
 
-#define CFG_FLASH_WORD_SIZE	unsigned short	/* flash word size (width)	*/
-#define CFG_FLASH_ADDR0		0x5555	/* 1st address for flash config cycles	*/
-#define CFG_FLASH_ADDR1		0x2AAA	/* 2nd address for flash config cycles	*/
+#define CONFIG_SYS_FLASH_WORD_SIZE	unsigned short	/* flash word size (width)	*/
+#define CONFIG_SYS_FLASH_ADDR0		0x5555	/* 1st address for flash config cycles	*/
+#define CONFIG_SYS_FLASH_ADDR1		0x2AAA	/* 2nd address for flash config cycles	*/
 /*
  * The following defines are added for buggy IOP480 byte interface.
  * All other boards should use the standard values (CPCI405 etc.)
  */
-#define CFG_FLASH_READ0		0x0000	/* 0 is standard			*/
-#define CFG_FLASH_READ1		0x0001	/* 1 is standard			*/
-#define CFG_FLASH_READ2		0x0002	/* 2 is standard			*/
+#define CONFIG_SYS_FLASH_READ0		0x0000	/* 0 is standard			*/
+#define CONFIG_SYS_FLASH_READ1		0x0001	/* 1 is standard			*/
+#define CONFIG_SYS_FLASH_READ2		0x0002	/* 2 is standard			*/
 
-#define CFG_FLASH_EMPTY_INFO		/* print 'E' for empty sector on flinfo */
+#define CONFIG_SYS_FLASH_EMPTY_INFO		/* print 'E' for empty sector on flinfo */
 
 /*-----------------------------------------------------------------------
  * Environment Variable setup
  */
-#define CFG_ENV_IS_IN_EEPROM	1	/* use EEPROM for environment vars */
-#define CFG_ENV_OFFSET		0x0	/* environment starts at the beginning of the EEPROM */
+#define CONFIG_ENV_IS_IN_EEPROM	1	/* use EEPROM for environment vars */
+#define CONFIG_ENV_OFFSET		0x0	/* environment starts at the beginning of the EEPROM */
 
 /*-----------------------------------------------------------------------
  * I2C EEPROM (STM24C02W6) for environment
  */
 #define CONFIG_HARD_I2C			/* I2c with hardware support */
-#define CFG_I2C_SPEED		400000	/* I2C speed and slave address */
-#define CFG_I2C_SLAVE		0xFE
+#define CONFIG_SYS_I2C_SPEED		400000	/* I2C speed and slave address */
+#define CONFIG_SYS_I2C_SLAVE		0xFE
 
-#define CFG_I2C_EEPROM_ADDR	0xA8	/* EEPROM STM24C02W6		*/
-#define CFG_I2C_EEPROM_ADDR_LEN 1	/* Bytes of address		*/
+#define CONFIG_SYS_I2C_EEPROM_ADDR	0xA8	/* EEPROM STM24C02W6		*/
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1	/* Bytes of address		*/
 /* mask of address bits that overflow into the "EEPROM chip address"	*/
-/*#define CFG_I2C_EEPROM_ADDR_OVERFLOW	0x07*/
-#define CFG_EEPROM_PAGE_WRITE_BITS 4	/* The Catalyst CAT24WC08 has	*/
+/*#define CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW	0x07*/
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 4	/* The Catalyst CAT24WC08 has	*/
 					/* 16 byte page write mode using*/
 					/* last 4 bits of the address	*/
-#define CFG_EEPROM_PAGE_WRITE_DELAY_MS	10   /* and takes up to 10 msec */
-#define CFG_EEPROM_PAGE_WRITE_ENABLE
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	10   /* and takes up to 10 msec */
 
 /* Flash banks JFFS2 should use */
 /*
-#define CFG_JFFS2_FIRST_BANK    0
-#define CFG_JFFS2_FIRST_SECTOR	2
-#define CFG_JFFS2_NUM_BANKS     1
+#define CONFIG_SYS_JFFS2_FIRST_BANK    0
+#define CONFIG_SYS_JFFS2_FIRST_SECTOR	2
+#define CONFIG_SYS_JFFS2_NUM_BANKS     1
 */
 
 /*
diff --git a/include/configs/BAB7xx.h b/include/configs/BAB7xx.h
index 26a1a2d31..1910b3463 100644
--- a/include/configs/BAB7xx.h
+++ b/include/configs/BAB7xx.h
@@ -63,7 +63,7 @@
     "bootm"
 
 #define CONFIG_LOADS_ECHO       0       /* echo off for serial download */
-#define CFG_LOADS_BAUD_CHANGE           /* allow baudrate changes */
+#define CONFIG_SYS_LOADS_BAUD_CHANGE           /* allow baudrate changes */
 
 /*
  * BOOTP options
@@ -93,8 +93,8 @@
 /*
  * Miscellaneous configurable options
  */
-#define CFG_LONGHELP                    /* undef to save memory */
-#define CFG_PROMPT              "=> "   /* Monitor Command Prompt */
+#define CONFIG_SYS_LONGHELP                    /* undef to save memory */
+#define CONFIG_SYS_PROMPT              "=> "   /* Monitor Command Prompt */
 
 /*
  * choose between COM1 and COM2 as serial console
@@ -102,105 +102,105 @@
 #define CONFIG_CONS_INDEX       1
 
 #if defined(CONFIG_CMD_KGDB)
-#define CFG_CBSIZE              1024        /* Console I/O Buffer Size */
+#define CONFIG_SYS_CBSIZE              1024        /* Console I/O Buffer Size */
 #else
-#define CFG_CBSIZE              256         /* Console I/O Buffer Size */
+#define CONFIG_SYS_CBSIZE              256         /* Console I/O Buffer Size */
 #endif
-#define CFG_PBSIZE              (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define CFG_MAXARGS             16          /* max number of command args    */
-#define CFG_BARGSIZE            CFG_CBSIZE  /* Boot Argument Buffer Size    */
+#define CONFIG_SYS_PBSIZE              (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS             16          /* max number of command args    */
+#define CONFIG_SYS_BARGSIZE            CONFIG_SYS_CBSIZE  /* Boot Argument Buffer Size    */
 
-#define CFG_MEMTEST_START       0x00000000  /* memtest works on    */
-#define CFG_MEMTEST_END         0x04000000  /* 0 ... 64 MB in DRAM    */
+#define CONFIG_SYS_MEMTEST_START       0x00000000  /* memtest works on    */
+#define CONFIG_SYS_MEMTEST_END         0x04000000  /* 0 ... 64 MB in DRAM    */
 
-#define CFG_LOAD_ADDR           0x1000000   /* default load address    */
+#define CONFIG_SYS_LOAD_ADDR           0x1000000   /* default load address    */
 
-#define CFG_HZ                  1000        /* dec. freq: 1 ms ticks */
+#define CONFIG_SYS_HZ                  1000        /* dec. freq: 1 ms ticks */
 
-#define CFG_BAUDRATE_TABLE      { 9600, 19200, 38400, 57600, 115200, 230400 }
+#define CONFIG_SYS_BAUDRATE_TABLE      { 9600, 19200, 38400, 57600, 115200, 230400 }
 
 /*
  * Low Level Configuration Settings
  * (address mappings, register initial values, etc.)
  * You should know what you are doing if you make changes here.
  */
-#define CFG_BOARD_ASM_INIT
+#define CONFIG_SYS_BOARD_ASM_INIT
 #define CONFIG_MISC_INIT_R
 
 /*
  * Choose the address mapping scheme for the MPC106 mem controller.
  * Default is mapping B (CHRP), set this define to choose mapping A (PReP).
  */
-#define CFG_ADDRESS_MAP_A
-#ifdef  CFG_ADDRESS_MAP_A
+#define CONFIG_SYS_ADDRESS_MAP_A
+#ifdef  CONFIG_SYS_ADDRESS_MAP_A
 
-#define CFG_PCI_MEMORY_BUS      0x80000000
-#define CFG_PCI_MEMORY_PHYS     0x00000000
-#define CFG_PCI_MEMORY_SIZE     0x80000000
+#define CONFIG_SYS_PCI_MEMORY_BUS      0x80000000
+#define CONFIG_SYS_PCI_MEMORY_PHYS     0x00000000
+#define CONFIG_SYS_PCI_MEMORY_SIZE     0x80000000
 
-#define CFG_PCI_MEM_BUS         0x00000000
-#define CFG_PCI_MEM_PHYS        0xc0000000
-#define CFG_PCI_MEM_SIZE        0x3f000000
+#define CONFIG_SYS_PCI_MEM_BUS         0x00000000
+#define CONFIG_SYS_PCI_MEM_PHYS        0xc0000000
+#define CONFIG_SYS_PCI_MEM_SIZE        0x3f000000
 
-#define CFG_ISA_MEM_BUS         0
-#define CFG_ISA_MEM_PHYS        0
-#define CFG_ISA_MEM_SIZE        0
+#define CONFIG_SYS_ISA_MEM_BUS         0
+#define CONFIG_SYS_ISA_MEM_PHYS        0
+#define CONFIG_SYS_ISA_MEM_SIZE        0
 
-#define CFG_PCI_IO_BUS          0x1000
-#define CFG_PCI_IO_PHYS         0x81000000
-#define CFG_PCI_IO_SIZE         0x01000000-CFG_PCI_IO_BUS
+#define CONFIG_SYS_PCI_IO_BUS          0x1000
+#define CONFIG_SYS_PCI_IO_PHYS         0x81000000
+#define CONFIG_SYS_PCI_IO_SIZE         0x01000000-CONFIG_SYS_PCI_IO_BUS
 
-#define CFG_ISA_IO_BUS          0x00000000
-#define CFG_ISA_IO_PHYS         0x80000000
-#define CFG_ISA_IO_SIZE         0x00800000
+#define CONFIG_SYS_ISA_IO_BUS          0x00000000
+#define CONFIG_SYS_ISA_IO_PHYS         0x80000000
+#define CONFIG_SYS_ISA_IO_SIZE         0x00800000
 
 #else
 
-#define CFG_PCI_MEMORY_BUS      0x00000000
-#define CFG_PCI_MEMORY_PHYS     0x00000000
-#define CFG_PCI_MEMORY_SIZE     0x40000000
+#define CONFIG_SYS_PCI_MEMORY_BUS      0x00000000
+#define CONFIG_SYS_PCI_MEMORY_PHYS     0x00000000
+#define CONFIG_SYS_PCI_MEMORY_SIZE     0x40000000
 
-#define CFG_PCI_MEM_BUS         0x80000000
-#define CFG_PCI_MEM_PHYS        0x80000000
-#define CFG_PCI_MEM_SIZE        0x7d000000
+#define CONFIG_SYS_PCI_MEM_BUS         0x80000000
+#define CONFIG_SYS_PCI_MEM_PHYS        0x80000000
+#define CONFIG_SYS_PCI_MEM_SIZE        0x7d000000
 
-#define CFG_ISA_MEM_BUS         0x00000000
-#define CFG_ISA_MEM_PHYS        0xfd000000
-#define CFG_ISA_MEM_SIZE        0x01000000
+#define CONFIG_SYS_ISA_MEM_BUS         0x00000000
+#define CONFIG_SYS_ISA_MEM_PHYS        0xfd000000
+#define CONFIG_SYS_ISA_MEM_SIZE        0x01000000
 
-#define CFG_PCI_IO_BUS          0x00800000
-#define CFG_PCI_IO_PHYS         0xfe800000
-#define CFG_PCI_IO_SIZE         0x00400000
+#define CONFIG_SYS_PCI_IO_BUS          0x00800000
+#define CONFIG_SYS_PCI_IO_PHYS         0xfe800000
+#define CONFIG_SYS_PCI_IO_SIZE         0x00400000
 
-#define CFG_ISA_IO_BUS          0x00000000
-#define CFG_ISA_IO_PHYS         0xfe000000
-#define CFG_ISA_IO_SIZE         0x00800000
+#define CONFIG_SYS_ISA_IO_BUS          0x00000000
+#define CONFIG_SYS_ISA_IO_PHYS         0xfe000000
+#define CONFIG_SYS_ISA_IO_SIZE         0x00800000
 
-#endif /*CFG_ADDRESS_MAP_A */
+#endif /*CONFIG_SYS_ADDRESS_MAP_A */
 
-#define CFG_60X_PCI_MEM_OFFSET  0x00000000
+#define CONFIG_SYS_60X_PCI_MEM_OFFSET  0x00000000
 
 /* driver defines FDC,IDE,... */
-#define CFG_ISA_IO_BASE_ADDRESS CFG_ISA_IO_PHYS
-#define CFG_ISA_IO              CFG_ISA_IO_PHYS
-#define CFG_60X_PCI_IO_OFFSET   CFG_ISA_IO_PHYS
+#define CONFIG_SYS_ISA_IO_BASE_ADDRESS CONFIG_SYS_ISA_IO_PHYS
+#define CONFIG_SYS_ISA_IO              CONFIG_SYS_ISA_IO_PHYS
+#define CONFIG_SYS_60X_PCI_IO_OFFSET   CONFIG_SYS_ISA_IO_PHYS
 
 /*
  * Start addresses for the final memory configuration
  * (Set up by the startup code)
- * Please note that CFG_SDRAM_BASE _must_ start at 0
+ * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
  */
-#define CFG_SDRAM_BASE          0x00000000
-#define CFG_FLASH_BASE          0xfff00000
+#define CONFIG_SYS_SDRAM_BASE          0x00000000
+#define CONFIG_SYS_FLASH_BASE          0xfff00000
 
 /*
  * Definitions for initial stack pointer and data area
  */
-#define CFG_INIT_RAM_ADDR       0x00fd0000  /* above the memtest region */
-#define CFG_INIT_RAM_END        0x4000
-#define CFG_GBL_DATA_SIZE       64          /* size in bytes reserved for init data */
-#define CFG_GBL_DATA_OFFSET     (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP_OFFSET      CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_INIT_RAM_ADDR       0x00fd0000  /* above the memtest region */
+#define CONFIG_SYS_INIT_RAM_END        0x4000
+#define CONFIG_SYS_GBL_DATA_SIZE       64          /* size in bytes reserved for init data */
+#define CONFIG_SYS_GBL_DATA_OFFSET     (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET      CONFIG_SYS_GBL_DATA_OFFSET
 
 /*
  * Flash mapping/organization on the MPC10x.
@@ -208,11 +208,11 @@
 #define FLASH_BASE0_PRELIM      0xff800000
 #define FLASH_BASE1_PRELIM      0xffc00000
 
-#define CFG_MAX_FLASH_BANKS     2           /* max number of memory banks    */
-#define CFG_MAX_FLASH_SECT      67          /* max number of sectors on one chip */
+#define CONFIG_SYS_MAX_FLASH_BANKS     2           /* max number of memory banks    */
+#define CONFIG_SYS_MAX_FLASH_SECT      67          /* max number of sectors on one chip */
 
-#define CFG_FLASH_ERASE_TOUT    120000      /* Timeout for Flash Erase (in ms) */
-#define CFG_FLASH_WRITE_TOUT    500         /* Timeout for Flash Write (in ms) */
+#define CONFIG_SYS_FLASH_ERASE_TOUT    120000      /* Timeout for Flash Erase (in ms) */
+#define CONFIG_SYS_FLASH_WRITE_TOUT    500         /* Timeout for Flash Write (in ms) */
 
 /*
  * JFFS2 partitions
@@ -234,36 +234,36 @@
 #define MTDPARTS_DEFAULT	"mtdparts=bab7xx-0:-(jffs2)"
 */
 
-#define CFG_MONITOR_BASE        CFG_FLASH_BASE
-#define CFG_MONITOR_LEN         0x40000     /* Reserve 256 kB for Monitor */
-#define CFG_MALLOC_LEN          0x20000     /* Reserve 128 kB for malloc() */
-#undef  CFG_MEMTEST
+#define CONFIG_SYS_MONITOR_BASE        CONFIG_SYS_FLASH_BASE
+#define CONFIG_SYS_MONITOR_LEN         0x40000     /* Reserve 256 kB for Monitor */
+#define CONFIG_SYS_MALLOC_LEN          0x20000     /* Reserve 128 kB for malloc() */
+#undef  CONFIG_SYS_MEMTEST
 
 /*
  * Environment settings
  */
 #define CONFIG_ENV_OVERWRITE
-#define CFG_ENV_IS_IN_NVRAM     1           /* use NVRAM for environment vars */
-#define CFG_NVRAM_SIZE          0x1ff0      /* NVRAM size (8kB), we must protect the clock data (16 bytes) */
-#define CFG_ENV_SIZE            0x400       /* Size of Environment vars (1kB) */
+#define CONFIG_ENV_IS_IN_NVRAM     1           /* use NVRAM for environment vars */
+#define CONFIG_SYS_NVRAM_SIZE          0x1ff0      /* NVRAM size (8kB), we must protect the clock data (16 bytes) */
+#define CONFIG_ENV_SIZE            0x400       /* Size of Environment vars (1kB) */
 /*
  * We store the environment and an image of revision eeprom in the upper part of the NVRAM. Thus,
  * user applications can use the remaining space for other purposes.
  */
-#define CFG_ENV_ADDR            (CFG_NVRAM_SIZE +0x10 -0x800)
-#define CFG_NV_SROM_COPY_ADDR   (CFG_NVRAM_SIZE +0x10 -0x400)
-#define CFG_NVRAM_ACCESS_ROUTINE            /* This board needs a special routine to access the NVRAM */
-#define CFG_SROM_SIZE           0x100       /* shadow of revision info is in nvram */
+#define CONFIG_ENV_ADDR            (CONFIG_SYS_NVRAM_SIZE +0x10 -0x800)
+#define CONFIG_SYS_NV_SROM_COPY_ADDR   (CONFIG_SYS_NVRAM_SIZE +0x10 -0x400)
+#define CONFIG_SYS_NVRAM_ACCESS_ROUTINE            /* This board needs a special routine to access the NVRAM */
+#define CONFIG_SYS_SROM_SIZE           0x100       /* shadow of revision info is in nvram */
 
 /*
  * Serial devices
  */
-#define CFG_NS16550
-#define CFG_NS16550_SERIAL
-#define CFG_NS16550_REG_SIZE    1
-#define CFG_NS16550_CLK         1843200
-#define CFG_NS16550_COM1        (CFG_ISA_IO + CFG_NS87308_UART1_BASE)
-#define CFG_NS16550_COM2        (CFG_ISA_IO + CFG_NS87308_UART2_BASE)
+#define CONFIG_SYS_NS16550
+#define CONFIG_SYS_NS16550_SERIAL
+#define CONFIG_SYS_NS16550_REG_SIZE    1
+#define CONFIG_SYS_NS16550_CLK         1843200
+#define CONFIG_SYS_NS16550_COM1        (CONFIG_SYS_ISA_IO + CONFIG_SYS_NS87308_UART1_BASE)
+#define CONFIG_SYS_NS16550_COM2        (CONFIG_SYS_ISA_IO + CONFIG_SYS_NS87308_UART2_BASE)
 
 /*
  * PCI stuff
@@ -284,7 +284,7 @@
 #define CONFIG_CONSOLE_TIME
 #define CONFIG_CONSOLE_EXTRA_INFO
 #define CONFIG_CONSOLE_CURSOR
-#define CFG_CONSOLE_BLINK_COUNT         30000    /* approx. 2 HZ */
+#define CONFIG_SYS_CONSOLE_BLINK_COUNT         30000    /* approx. 2 HZ */
 
 /*
  * IDE/SCSI globals
@@ -302,15 +302,15 @@ extern unsigned char   scsi_sym53c8xx_ccf;
  * ATAPI Support (experimental)
  */
 #define CONFIG_ATAPI
-#define CFG_IDE_MAXBUS          1                       /* max. 2 IDE busses    */
-#define CFG_IDE_MAXDEVICE       (CFG_IDE_MAXBUS*2)      /* max. 2 drives per IDE bus */
+#define CONFIG_SYS_IDE_MAXBUS          1                       /* max. 2 IDE busses    */
+#define CONFIG_SYS_IDE_MAXDEVICE       (CONFIG_SYS_IDE_MAXBUS*2)      /* max. 2 drives per IDE bus */
 
-#define CFG_ATA_BASE_ADDR       CFG_60X_PCI_IO_OFFSET   /* base address */
-#define CFG_ATA_IDE0_OFFSET     0x1F0                   /* default ide0 offste */
-#define CFG_ATA_IDE1_OFFSET     0x170                   /* default ide1 offset */
-#define CFG_ATA_DATA_OFFSET     0                       /* data reg offset    */
-#define CFG_ATA_REG_OFFSET      0                       /* reg offset */
-#define CFG_ATA_ALT_OFFSET      0x200                   /* alternate register offset */
+#define CONFIG_SYS_ATA_BASE_ADDR       CONFIG_SYS_60X_PCI_IO_OFFSET   /* base address */
+#define CONFIG_SYS_ATA_IDE0_OFFSET     0x1F0                   /* default ide0 offste */
+#define CONFIG_SYS_ATA_IDE1_OFFSET     0x170                   /* default ide1 offset */
+#define CONFIG_SYS_ATA_DATA_OFFSET     0                       /* data reg offset    */
+#define CONFIG_SYS_ATA_REG_OFFSET      0                       /* reg offset */
+#define CONFIG_SYS_ATA_ALT_OFFSET      0x200                   /* alternate register offset */
 
 #define ATA_RESET_TIME          (ata_reset_time)
 
@@ -322,11 +322,11 @@ extern unsigned char   scsi_sym53c8xx_ccf;
  */
 #define CONFIG_SCSI_SYM53C8XX
 #define CONFIG_SCSI_DEV_ID      (scsi_dev_id)           /* 875 or 860 */
-#define CFG_SCSI_SYM53C8XX_CCF  (scsi_sym53c8xx_ccf)    /* value for none 40 mhz clocks */
-#define CFG_SCSI_MAX_LUN        8                       /* number of supported LUNs */
-#define CFG_SCSI_MAX_SCSI_ID    (scsi_max_scsi_id)      /* max SCSI ID (0-6) */
-#define CFG_SCSI_MAX_DEVICE     (15 * CFG_SCSI_MAX_LUN) /* max. Target devices */
-#define CFG_SCSI_SPIN_UP_TIME   (scsi_reset_time)
+#define CONFIG_SYS_SCSI_SYM53C8XX_CCF  (scsi_sym53c8xx_ccf)    /* value for none 40 mhz clocks */
+#define CONFIG_SYS_SCSI_MAX_LUN        8                       /* number of supported LUNs */
+#define CONFIG_SYS_SCSI_MAX_SCSI_ID    (scsi_max_scsi_id)      /* max SCSI ID (0-6) */
+#define CONFIG_SYS_SCSI_MAX_DEVICE     (15 * CONFIG_SYS_SCSI_MAX_LUN) /* max. Target devices */
+#define CONFIG_SYS_SCSI_SPIN_UP_TIME   (scsi_reset_time)
 
 /*
  * Partion suppport
@@ -339,40 +339,40 @@ extern unsigned char   scsi_sym53c8xx_ccf;
  * Winbond Configuration
  */
 #define CONFIG_WINBOND_83C553      1                       /* has a winbond bridge */
-#define CFG_USE_WINBOND_IDE     0                       /* use winbond 83c553 internal ide */
-#define CFG_WINBOND_ISA_CFG_ADDR    0x80005800          /* pci-isa bridge config addr */
-#define CFG_WINBOND_IDE_CFG_ADDR    0x80005900          /* ide config addr */
+#define CONFIG_SYS_USE_WINBOND_IDE     0                       /* use winbond 83c553 internal ide */
+#define CONFIG_SYS_WINBOND_ISA_CFG_ADDR    0x80005800          /* pci-isa bridge config addr */
+#define CONFIG_SYS_WINBOND_IDE_CFG_ADDR    0x80005900          /* ide config addr */
 
 /*
  * NS87308 Configuration
  */
 #define CONFIG_NS87308                    /* Nat Semi super-io cntr on ISA bus */
-#define CFG_NS87308_BADDR_10    1
-#define CFG_NS87308_DEVS        (CFG_NS87308_UART1   | \
-				 CFG_NS87308_UART2   | \
-				 CFG_NS87308_KBC1    | \
-				 CFG_NS87308_MOUSE   | \
-				 CFG_NS87308_FDC     | \
-				 CFG_NS87308_RARP    | \
-				 CFG_NS87308_GPIO    | \
-				 CFG_NS87308_POWRMAN | \
-				 CFG_NS87308_RTC_APC )
-
-#define CFG_NS87308_PS2MOD
-#define CFG_NS87308_GPIO_BASE   0x0220
-#define CFG_NS87308_PWMAN_BASE  0x0460
-#define CFG_NS87308_PMC2        0x00        /* SuperI/O clock source is 24MHz via X1 */
+#define CONFIG_SYS_NS87308_BADDR_10    1
+#define CONFIG_SYS_NS87308_DEVS        (CONFIG_SYS_NS87308_UART1   | \
+				 CONFIG_SYS_NS87308_UART2   | \
+				 CONFIG_SYS_NS87308_KBC1    | \
+				 CONFIG_SYS_NS87308_MOUSE   | \
+				 CONFIG_SYS_NS87308_FDC     | \
+				 CONFIG_SYS_NS87308_RARP    | \
+				 CONFIG_SYS_NS87308_GPIO    | \
+				 CONFIG_SYS_NS87308_POWRMAN | \
+				 CONFIG_SYS_NS87308_RTC_APC )
+
+#define CONFIG_SYS_NS87308_PS2MOD
+#define CONFIG_SYS_NS87308_GPIO_BASE   0x0220
+#define CONFIG_SYS_NS87308_PWMAN_BASE  0x0460
+#define CONFIG_SYS_NS87308_PMC2        0x00        /* SuperI/O clock source is 24MHz via X1 */
 
 /*
  * set up the NVRAM access registers
  * NVRAM's controlled by the configurable CS line from the 87308
  */
-#define CFG_NS87308_CS0_BASE    0x0076
-#define CFG_NS87308_CS0_CONF    0x40
-#define CFG_NS87308_CS1_BASE    0x0070
-#define CFG_NS87308_CS1_CONF    0x1C
-#define CFG_NS87308_CS2_BASE    0x0071
-#define CFG_NS87308_CS2_CONF    0x1C
+#define CONFIG_SYS_NS87308_CS0_BASE    0x0076
+#define CONFIG_SYS_NS87308_CS0_CONF    0x40
+#define CONFIG_SYS_NS87308_CS1_BASE    0x0070
+#define CONFIG_SYS_NS87308_CS1_CONF    0x1C
+#define CONFIG_SYS_NS87308_CS2_BASE    0x0071
+#define CONFIG_SYS_NS87308_CS2_CONF    0x1C
 
 #define CONFIG_RTC_MK48T59
 
@@ -381,51 +381,51 @@ extern unsigned char   scsi_sym53c8xx_ccf;
  */
 #if 1
 
-#define CFG_IBAT0L 0
-#define CFG_IBAT0U 0
-#define CFG_DBAT0L CFG_IBAT1L
-#define CFG_DBAT0U CFG_IBAT1U
+#define CONFIG_SYS_IBAT0L 0
+#define CONFIG_SYS_IBAT0U 0
+#define CONFIG_SYS_DBAT0L CONFIG_SYS_IBAT1L
+#define CONFIG_SYS_DBAT0U CONFIG_SYS_IBAT1U
 
-#define CFG_IBAT1L 0
-#define CFG_IBAT1U 0
-#define CFG_DBAT1L CFG_IBAT1L
-#define CFG_DBAT1U CFG_IBAT1U
+#define CONFIG_SYS_IBAT1L 0
+#define CONFIG_SYS_IBAT1U 0
+#define CONFIG_SYS_DBAT1L CONFIG_SYS_IBAT1L
+#define CONFIG_SYS_DBAT1U CONFIG_SYS_IBAT1U
 
-#define CFG_IBAT2L 0
-#define CFG_IBAT2U 0
-#define CFG_DBAT2L CFG_IBAT2L
-#define CFG_DBAT2U CFG_IBAT2U
+#define CONFIG_SYS_IBAT2L 0
+#define CONFIG_SYS_IBAT2U 0
+#define CONFIG_SYS_DBAT2L CONFIG_SYS_IBAT2L
+#define CONFIG_SYS_DBAT2U CONFIG_SYS_IBAT2U
 
-#define CFG_IBAT3L 0
-#define CFG_IBAT3U 0
-#define CFG_DBAT3L CFG_IBAT3L
-#define CFG_DBAT3U CFG_IBAT3U
+#define CONFIG_SYS_IBAT3L 0
+#define CONFIG_SYS_IBAT3U 0
+#define CONFIG_SYS_DBAT3L CONFIG_SYS_IBAT3L
+#define CONFIG_SYS_DBAT3U CONFIG_SYS_IBAT3U
 
 #else
 
 /* SDRAM */
-#define CFG_IBAT0L (CFG_SDRAM_BASE | BATL_RW)
-#define CFG_IBAT0U (CFG_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
-#define CFG_DBAT0L CFG_IBAT1L
-#define CFG_DBAT0U CFG_IBAT1U
+#define CONFIG_SYS_IBAT0L (CONFIG_SYS_SDRAM_BASE | BATL_RW)
+#define CONFIG_SYS_IBAT0U (CONFIG_SYS_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CONFIG_SYS_DBAT0L CONFIG_SYS_IBAT1L
+#define CONFIG_SYS_DBAT0U CONFIG_SYS_IBAT1U
 
 /* address range for flashes */
-#define CFG_IBAT1L (CFG_FLASH_BASE | BATL_RW | BATL_CACHEINHIBIT)
-#define CFG_IBAT1U (CFG_FLASH_BASE | BATU_BL_16M | BATU_VS | BATU_VP)
-#define CFG_DBAT1L CFG_IBAT1L
-#define CFG_DBAT1U CFG_IBAT1U
+#define CONFIG_SYS_IBAT1L (CONFIG_SYS_FLASH_BASE | BATL_RW | BATL_CACHEINHIBIT)
+#define CONFIG_SYS_IBAT1U (CONFIG_SYS_FLASH_BASE | BATU_BL_16M | BATU_VS | BATU_VP)
+#define CONFIG_SYS_DBAT1L CONFIG_SYS_IBAT1L
+#define CONFIG_SYS_DBAT1U CONFIG_SYS_IBAT1U
 
 /* ISA IO space */
-#define CFG_IBAT2L (CFG_ISA_IO | BATL_RW | BATL_CACHEINHIBIT)
-#define CFG_IBAT2U (CFG_ISA_IO | BATU_BL_16M | BATU_VS | BATU_VP)
-#define CFG_DBAT2L CFG_IBAT2L
-#define CFG_DBAT2U CFG_IBAT2U
+#define CONFIG_SYS_IBAT2L (CONFIG_SYS_ISA_IO | BATL_RW | BATL_CACHEINHIBIT)
+#define CONFIG_SYS_IBAT2U (CONFIG_SYS_ISA_IO | BATU_BL_16M | BATU_VS | BATU_VP)
+#define CONFIG_SYS_DBAT2L CONFIG_SYS_IBAT2L
+#define CONFIG_SYS_DBAT2U CONFIG_SYS_IBAT2U
 
 /* ISA memory space */
-#define CFG_IBAT3L (CFG_ISA_MEM | BATL_RW | BATL_CACHEINHIBIT)
-#define CFG_IBAT3U (CFG_ISA_MEM | BATU_BL_16M | BATU_VS | BATU_VP)
-#define CFG_DBAT3L CFG_IBAT3L
-#define CFG_DBAT3U CFG_IBAT3U
+#define CONFIG_SYS_IBAT3L (CONFIG_SYS_ISA_MEM | BATL_RW | BATL_CACHEINHIBIT)
+#define CONFIG_SYS_IBAT3U (CONFIG_SYS_ISA_MEM | BATU_BL_16M | BATU_VS | BATU_VP)
+#define CONFIG_SYS_DBAT3L CONFIG_SYS_IBAT3L
+#define CONFIG_SYS_DBAT3U CONFIG_SYS_IBAT3U
 
 #endif
 
@@ -436,35 +436,35 @@ extern unsigned char   scsi_sym53c8xx_ccf;
 extern  unsigned long           bab7xx_get_bus_freq (void);
 extern  unsigned long           bab7xx_get_gclk_freq (void);
 #endif
-#define CFG_BUS_HZ              bab7xx_get_bus_freq()
-#define CFG_BUS_CLK             CFG_BUS_HZ
-#define CFG_CPU_CLK             bab7xx_get_gclk_freq()
+#define CONFIG_SYS_BUS_HZ              bab7xx_get_bus_freq()
+#define CONFIG_SYS_BUS_CLK             CONFIG_SYS_BUS_HZ
+#define CONFIG_SYS_CPU_CLK             bab7xx_get_gclk_freq()
 
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define CFG_BOOTMAPSZ           (8 << 20)           /* Initial Memory map for Linux */
+#define CONFIG_SYS_BOOTMAPSZ           (8 << 20)           /* Initial Memory map for Linux */
 
 /*
  * Cache Configuration
  */
-#define CFG_CACHELINE_SIZE        32    /* For all MPC74xx CPUs */
+#define CONFIG_SYS_CACHELINE_SIZE        32    /* For all MPC74xx CPUs */
 #if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT        5    /* log base 2 of the above value */
+#define CONFIG_SYS_CACHELINE_SHIFT        5    /* log base 2 of the above value */
 #endif
 
 /*
  * L2 Cache Configuration is board specific for BAB740/BAB750
  * Init values read from revision srom.
  */
-#undef  CFG_L2
+#undef  CONFIG_SYS_L2
 #define L2_INIT     (L2CR_L2SIZ_HM | L2CR_L2CLK_3 | L2CR_L2RAM_BURST | \
 		     L2CR_L2OH_5   | L2CR_L2CTL   | L2CR_L2WT)
 #define L2_ENABLE   (L2_INIT | L2CR_L2E)
 
-#define CFG_L2_BAB7xx
+#define CONFIG_SYS_L2_BAB7xx
 
 /*
  * Internal Definitions
diff --git a/include/configs/BC3450.h b/include/configs/BC3450.h
index 3c5d03812..28be8dd62 100644
--- a/include/configs/BC3450.h
+++ b/include/configs/BC3450.h
@@ -56,7 +56,7 @@
 #define CONFIG_BC3450_FP	1	/*  + enable FP O/P		    */
 #undef CONFIG_BC3450_CRT		/*  + enable CRT O/P (Debug only!)  */
 
-#define CFG_MPC5XXX_CLKIN	33000000 /* ... running at 33.000000MHz	    */
+#define CONFIG_SYS_MPC5XXX_CLKIN	33000000 /* ... running at 33.000000MHz	    */
 
 #define BOOTFLAG_COLD		0x01	/* Normal Power-On: Boot from FLASH */
 #define BOOTFLAG_WARM		0x02	/* Software reboot		    */
@@ -68,7 +68,7 @@
  */
 #define CONFIG_PSC_CONSOLE	1	/* console is on PSC1		*/
 #define CONFIG_BAUDRATE		115200	/* ... at 115200 bps		*/
-#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
 
 /*
  * AT-PS/2 Multiplexer
@@ -77,7 +77,7 @@
 # define CONFIG_PS2KBD			/* AT-PS/2 Keyboard		*/
 # define CONFIG_PS2MULT			/* .. on PS/2 Multiplexer	*/
 # define CONFIG_PS2SERIAL	6		/* .. on PSC6		*/
-# define CONFIG_PS2MULT_DELAY	(CFG_HZ/2)	/* Initial delay	*/
+# define CONFIG_PS2MULT_DELAY	(CONFIG_SYS_HZ/2)	/* Initial delay	*/
 # define CONFIG_BOARD_EARLY_INIT_R
 #endif /* CONFIG_BC3450_PS2 */
 
@@ -101,7 +101,7 @@
 
 #define CONFIG_NET_MULTI	1
 /*#define CONFIG_EEPRO100	XXX - FIXME: conflicts when CONFIG_MII is enabled */
-#define CFG_RX_ETH_BUFFER	8	/* use 8 rx buffer on eepro100	*/
+#define CONFIG_SYS_RX_ETH_BUFFER	8	/* use 8 rx buffer on eepro100	*/
 #define CONFIG_NS8382X		1
 
 /*
@@ -116,7 +116,7 @@
 # define CONFIG_CONSOLE_EXTRA_INFO	/* display Board/Device-Infos */
 # define CONFIG_VIDEO_SW_CURSOR
 # define CONFIG_SPLASH_SCREEN
-# define CFG_CONSOLE_IS_IN_ENV
+# define CONFIG_SYS_CONSOLE_IS_IN_ENV
 
 /*
  * Partitions
@@ -136,9 +136,9 @@
 /*
  * POST support
  */
-#define CONFIG_POST		(CFG_POST_MEMORY   | \
-				 CFG_POST_CPU	   | \
-				 CFG_POST_I2C)
+#define CONFIG_POST		(CONFIG_SYS_POST_MEMORY   | \
+				 CONFIG_SYS_POST_CPU	   | \
+				 CONFIG_SYS_POST_I2C)
 
 #ifdef CONFIG_POST
 /* preserve space for the post_word at end of on-chip SRAM */
@@ -208,7 +208,7 @@
 #define CONFIG_TIMESTAMP		/* display image timestamps */
 
 #if (TEXT_BASE == 0xFC000000)		/* Boot low */
-#   define CFG_LOWBOOT		1
+#   define CONFIG_SYS_LOWBOOT		1
 #endif
 
 /*
@@ -268,24 +268,24 @@
 /*
  * IPB Bus clocking configuration.
  */
-#define CFG_IPBCLK_EQUALS_XLBCLK		/* define for 133MHz speed */
+#define CONFIG_SYS_IPBCLK_EQUALS_XLBCLK		/* define for 133MHz speed */
 
 /*
  * PCI Bus clocking configuration
  *
  * Actually a PCI Clock of 66 MHz is only set (in cpu_init.c) if
- * CFG_IPBCLK_EQUALS_XLBCLK is defined. This is because a PCI Clock
+ * CONFIG_SYS_IPBCLK_EQUALS_XLBCLK is defined. This is because a PCI Clock
  *  of 66 MHz yet hasn't been tested with a IPB Bus Clock of 66 MHz.
  */
-#if defined(CFG_IPBCLK_EQUALS_XLBCLK)
-# define CFG_PCICLK_EQUALS_IPBCLK_DIV2	/* define for 66MHz speed */
+#if defined(CONFIG_SYS_IPBCLK_EQUALS_XLBCLK)
+# define CONFIG_SYS_PCICLK_EQUALS_IPBCLK_DIV2	/* define for 66MHz speed */
 #endif
 
 /*
  * I2C configuration
  */
 #define CONFIG_HARD_I2C		1	/* I2C with hardware support */
-#define CFG_I2C_MODULE		2	/* Select I2C module #2 */
+#define CONFIG_SYS_I2C_MODULE		2	/* Select I2C module #2 */
 
 /*
  * I2C clock frequency
@@ -293,11 +293,11 @@
  * Please notice, that the resulting clock frequency could differ from the
  * configured value. This is because the I2C clock is derived from system
  * clock over a frequency divider with only a few divider values. U-boot
- * calculates the best approximation for CFG_I2C_SPEED. However the calculated
+ * calculates the best approximation for CONFIG_SYS_I2C_SPEED. However the calculated
  * approximation allways lies below the configured value, never above.
  */
-#define CFG_I2C_SPEED		100000 /* 100 kHz */
-#define CFG_I2C_SLAVE		0x7F
+#define CONFIG_SYS_I2C_SPEED		100000 /* 100 kHz */
+#define CONFIG_SYS_I2C_SLAVE		0x7F
 
 /*
  * EEPROM configuration for I²C EEPROM M24C32
@@ -305,17 +305,17 @@
  *
  * The TQM5200 module may hold an EEPROM at address 0x50.
  */
-#define CFG_I2C_EEPROM_ADDR		0x50	/* 1010000x (TQM) */
-#define CFG_I2C_EEPROM_ADDR_LEN		2
-#define CFG_EEPROM_PAGE_WRITE_BITS	5	/* =32 Bytes per write */
-#define CFG_EEPROM_PAGE_WRITE_DELAY_MS	70
+#define CONFIG_SYS_I2C_EEPROM_ADDR		0x50	/* 1010000x (TQM) */
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN		2
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS	5	/* =32 Bytes per write */
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	70
 
 /*
  * RTC configuration
  */
 #if defined (CONFIG_BC3450_DS1340) && !defined (CONFIG_BC3450_DS3231)
 # define CONFIG_RTC_M41T11	1
-# define CFG_I2C_RTC_ADDR	0x68
+# define CONFIG_SYS_I2C_RTC_ADDR	0x68
 #else
 # define CONFIG_RTC_MPC5200	1	/* use MPC5200 internal RTC */
 # define CONFIG_BOARD_EARLY_INIT_R
@@ -324,26 +324,26 @@
 /*
  * Flash configuration
  */
-#define CFG_FLASH_BASE		TEXT_BASE /* 0xFC000000 */
+#define CONFIG_SYS_FLASH_BASE		TEXT_BASE /* 0xFC000000 */
 
 /* use CFI flash driver if no module variant is spezified */
-#define CFG_FLASH_CFI		1	/* Flash is CFI conformant */
+#define CONFIG_SYS_FLASH_CFI		1	/* Flash is CFI conformant */
 #define CONFIG_FLASH_CFI_DRIVER	1	/* Use the common driver */
-#define CFG_FLASH_BANKS_LIST	{ CFG_BOOTCS_START }
-#define CFG_FLASH_EMPTY_INFO
-#define CFG_FLASH_SIZE		0x04000000 /* 64 MByte */
-#define CFG_MAX_FLASH_SECT	512	/* max num of sects on one chip */
-#undef CFG_FLASH_USE_BUFFER_WRITE	/* not supported yet for AMD */
-
-#if !defined(CFG_LOWBOOT)
-#define CFG_ENV_ADDR		(CFG_FLASH_BASE + 0x00760000 + 0x00800000)
-#else	/* CFG_LOWBOOT */
-#define CFG_ENV_ADDR		(CFG_FLASH_BASE + 0x00060000)
-#endif	/* CFG_LOWBOOT */
-#define CFG_MAX_FLASH_BANKS	1	/* max num of flash banks
+#define CONFIG_SYS_FLASH_BANKS_LIST	{ CONFIG_SYS_BOOTCS_START }
+#define CONFIG_SYS_FLASH_EMPTY_INFO
+#define CONFIG_SYS_FLASH_SIZE		0x04000000 /* 64 MByte */
+#define CONFIG_SYS_MAX_FLASH_SECT	512	/* max num of sects on one chip */
+#undef CONFIG_SYS_FLASH_USE_BUFFER_WRITE	/* not supported yet for AMD */
+
+#if !defined(CONFIG_SYS_LOWBOOT)
+#define CONFIG_ENV_ADDR		(CONFIG_SYS_FLASH_BASE + 0x00760000 + 0x00800000)
+#else	/* CONFIG_SYS_LOWBOOT */
+#define CONFIG_ENV_ADDR		(CONFIG_SYS_FLASH_BASE + 0x00060000)
+#endif	/* CONFIG_SYS_LOWBOOT */
+#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max num of flash banks
 					   (= chip selects) */
-#define CFG_FLASH_ERASE_TOUT	240000	/* Flash Erase Timeout (in ms)	*/
-#define CFG_FLASH_WRITE_TOUT	500	/* Flash Write Timeout (in ms)	*/
+#define CONFIG_SYS_FLASH_ERASE_TOUT	240000	/* Flash Erase Timeout (in ms)	*/
+#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Flash Write Timeout (in ms)	*/
 
 /* Dynamic MTD partition support */
 #define CONFIG_JFFS2_CMDLINE
@@ -358,40 +358,40 @@
 /*
  * Environment settings
  */
-#define CFG_ENV_IS_IN_FLASH	1
-#define CFG_ENV_SIZE		0x10000
-#define CFG_ENV_SECT_SIZE	0x20000
-#define CFG_ENV_ADDR_REDUND	(CFG_ENV_ADDR + CFG_ENV_SECT_SIZE)
-#define CFG_ENV_SIZE_REDUND	(CFG_ENV_SIZE)
+#define CONFIG_ENV_IS_IN_FLASH	1
+#define CONFIG_ENV_SIZE		0x10000
+#define CONFIG_ENV_SECT_SIZE	0x20000
+#define CONFIG_ENV_ADDR_REDUND	(CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE)
+#define CONFIG_ENV_SIZE_REDUND	(CONFIG_ENV_SIZE)
 
 /*
  * Memory map
  */
-#define CFG_MBAR		0xF0000000
-#define CFG_SDRAM_BASE		0x00000000
-#define CFG_DEFAULT_MBAR	0x80000000
+#define CONFIG_SYS_MBAR		0xF0000000
+#define CONFIG_SYS_SDRAM_BASE		0x00000000
+#define CONFIG_SYS_DEFAULT_MBAR	0x80000000
 
 /* Use ON-Chip SRAM until RAM will be available */
-#define CFG_INIT_RAM_ADDR	MPC5XXX_SRAM
+#define CONFIG_SYS_INIT_RAM_ADDR	MPC5XXX_SRAM
 #ifdef CONFIG_POST
 /* preserve space for the post_word at end of on-chip SRAM */
-# define CFG_INIT_RAM_END	MPC5XXX_SRAM_POST_SIZE
+# define CONFIG_SYS_INIT_RAM_END	MPC5XXX_SRAM_POST_SIZE
 #else
-# define CFG_INIT_RAM_END	MPC5XXX_SRAM_SIZE
+# define CONFIG_SYS_INIT_RAM_END	MPC5XXX_SRAM_SIZE
 #endif /*CONFIG_POST*/
 
-#define CFG_GBL_DATA_SIZE	128	/* Bytes reserved for initial data  */
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_GBL_DATA_SIZE	128	/* Bytes reserved for initial data  */
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
-#define CFG_MONITOR_BASE	TEXT_BASE
-#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
-#   define CFG_RAMBOOT		1
+#define CONFIG_SYS_MONITOR_BASE	TEXT_BASE
+#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
+#   define CONFIG_SYS_RAMBOOT		1
 #endif
 
-#define CFG_MONITOR_LEN		(384 << 10) /* Reserve 384 kB for Monitor   */
-#define CFG_MALLOC_LEN		(128 << 10) /* Reserve 128 kB for malloc()  */
-#define CFG_BOOTMAPSZ		(8 << 20)   /* Initial Memory map for Linux */
+#define CONFIG_SYS_MONITOR_LEN		(384 << 10) /* Reserve 384 kB for Monitor   */
+#define CONFIG_SYS_MALLOC_LEN		(128 << 10) /* Reserve 128 kB for malloc()  */
+#define CONFIG_SYS_BOOTMAPSZ		(8 << 20)   /* Initial Memory map for Linux */
 
 /*
  * Ethernet configuration
@@ -426,38 +426,38 @@
  *  I2C:    CAN1 / I²C2		  [0x bxxxxxxx]
  */
 #ifdef CONFIG_BC3450_AC97
-# define CFG_GPS_PORT_CONFIG	0xb1502124
+# define CONFIG_SYS_GPS_PORT_CONFIG	0xb1502124
 #else /* PSC2=UART2 */
-# define CFG_GPS_PORT_CONFIG	0xb1502144
+# define CONFIG_SYS_GPS_PORT_CONFIG	0xb1502144
 #endif
 
 /*
  * Miscellaneous configurable options
  */
-#define CFG_LONGHELP				/* undef to save memory	    */
-#define CFG_PROMPT		"=> "		/* Monitor Command Prompt   */
+#define CONFIG_SYS_LONGHELP				/* undef to save memory	    */
+#define CONFIG_SYS_PROMPT		"=> "		/* Monitor Command Prompt   */
 #if defined(CONFIG_CMD_KGDB)
-#define CFG_CBSIZE		1024		/* Console I/O Buffer Size  */
+#define CONFIG_SYS_CBSIZE		1024		/* Console I/O Buffer Size  */
 #else
-#define CFG_CBSIZE		256		/* Console I/O Buffer Size  */
+#define CONFIG_SYS_CBSIZE		256		/* Console I/O Buffer Size  */
 #endif
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size  */
-#define CFG_MAXARGS		16		/* max no of command args   */
-#define CFG_BARGSIZE		CFG_CBSIZE	/* Boot Arg. Buffer Size    */
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size  */
+#define CONFIG_SYS_MAXARGS		16		/* max no of command args   */
+#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Arg. Buffer Size    */
 
-#define CFG_ALT_MEMTEST				/* Enable an alternative,   */
+#define CONFIG_SYS_ALT_MEMTEST				/* Enable an alternative,   */
 						/*  more extensive mem test */
 
-#define CFG_MEMTEST_START	0x00100000	/* memtest works on	    */
-#define CFG_MEMTEST_END		0x00f00000	/* 1 ... 15 MB in DRAM	    */
+#define CONFIG_SYS_MEMTEST_START	0x00100000	/* memtest works on	    */
+#define CONFIG_SYS_MEMTEST_END		0x00f00000	/* 1 ... 15 MB in DRAM	    */
 
-#define CFG_LOAD_ADDR		0x100000	/* default load address	    */
+#define CONFIG_SYS_LOAD_ADDR		0x100000	/* default load address	    */
 
-#define CFG_HZ			1000		/* dec freq: 1ms ticks	    */
+#define CONFIG_SYS_HZ			1000		/* dec freq: 1ms ticks	    */
 
-#define CFG_CACHELINE_SIZE	32	/* For MPC5xxx CPUs		    */
+#define CONFIG_SYS_CACHELINE_SIZE	32	/* For MPC5xxx CPUs		    */
 #if defined(CONFIG_CMD_KGDB)
-#  define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value    */
+#  define CONFIG_SYS_CACHELINE_SHIFT	5	/* log base 2 of the above value    */
 #endif
 
 /*
@@ -469,22 +469,22 @@
  * Various low-level settings
  */
 #if defined(CONFIG_MPC5200)
-# define CFG_HID0_INIT		HID0_ICE | HID0_ICFI
-# define CFG_HID0_FINAL		HID0_ICE
+# define CONFIG_SYS_HID0_INIT		HID0_ICE | HID0_ICFI
+# define CONFIG_SYS_HID0_FINAL		HID0_ICE
 #else
-# define CFG_HID0_INIT		0
-# define CFG_HID0_FINAL		0
+# define CONFIG_SYS_HID0_INIT		0
+# define CONFIG_SYS_HID0_FINAL		0
 #endif
 
-#define CFG_BOOTCS_START	CFG_FLASH_BASE
-#define CFG_BOOTCS_SIZE		CFG_FLASH_SIZE
-#ifdef CFG_PCICLK_EQUALS_IPBCLK_DIV2
-# define CFG_BOOTCS_CFG		0x0008DF30	/* for pci_clk	= 66 MHz */
+#define CONFIG_SYS_BOOTCS_START	CONFIG_SYS_FLASH_BASE
+#define CONFIG_SYS_BOOTCS_SIZE		CONFIG_SYS_FLASH_SIZE
+#ifdef CONFIG_SYS_PCICLK_EQUALS_IPBCLK_DIV2
+# define CONFIG_SYS_BOOTCS_CFG		0x0008DF30	/* for pci_clk	= 66 MHz */
 #else
-# define CFG_BOOTCS_CFG		0x0004DF30	/* for pci_clk = 33 MHz	 */
+# define CONFIG_SYS_BOOTCS_CFG		0x0004DF30	/* for pci_clk = 33 MHz	 */
 #endif
-#define CFG_CS0_START		CFG_FLASH_BASE
-#define CFG_CS0_SIZE		CFG_FLASH_SIZE
+#define CONFIG_SYS_CS0_START		CONFIG_SYS_FLASH_BASE
+#define CONFIG_SYS_CS0_SIZE		CONFIG_SYS_FLASH_SIZE
 
 /* automatic configuration of chip selects */
 #ifdef CONFIG_TQM5200
@@ -496,9 +496,9 @@
  * for SDRAM autosizing.
  */
 #ifdef CONFIG_TQM5200
-# define CFG_CS2_START		0xE5000000
-# define CFG_CS2_SIZE		0x100000	/* 1 MByte */
-# define CFG_CS2_CFG		0x0004D930
+# define CONFIG_SYS_CS2_START		0xE5000000
+# define CONFIG_SYS_CS2_SIZE		0x100000	/* 1 MByte */
+# define CONFIG_SYS_CS2_CFG		0x0004D930
 #endif /* CONFIG_TQM5200 */
 
 /*
@@ -507,17 +507,17 @@
  */
 #ifdef CONFIG_TQM5200
 # define SM501_FB_BASE		0xE0000000
-# define CFG_CS1_START		(SM501_FB_BASE)
-# define CFG_CS1_SIZE		0x4000000	/* 64 MByte */
-# define CFG_CS1_CFG		0x8F48FF70
-# define SM501_MMIO_BASE	CFG_CS1_START + 0x03E00000
+# define CONFIG_SYS_CS1_START		(SM501_FB_BASE)
+# define CONFIG_SYS_CS1_SIZE		0x4000000	/* 64 MByte */
+# define CONFIG_SYS_CS1_CFG		0x8F48FF70
+# define SM501_MMIO_BASE	CONFIG_SYS_CS1_START + 0x03E00000
 #endif /* CONFIG_TQM5200 */
 
-#define CFG_CS_BURST		0x00000000
-#define CFG_CS_DEADCYCLE	0x33333311	/* 1 dead cycle for	*/
+#define CONFIG_SYS_CS_BURST		0x00000000
+#define CONFIG_SYS_CS_DEADCYCLE	0x33333311	/* 1 dead cycle for	*/
 						/*  flash and SM501	*/
 
-#define CFG_RESET_ADDRESS	0xff000000
+#define CONFIG_SYS_RESET_ADDRESS	0xff000000
 
 /*
  * USB stuff
@@ -536,23 +536,23 @@
 #define CONFIG_IDE_RESET		/* reset for ide      supported */
 #define CONFIG_IDE_PREINIT
 
-#define CFG_IDE_MAXBUS		1	/* max. 1 IDE bus		*/
-#define CFG_IDE_MAXDEVICE	2	/* max. 2 drives per IDE bus	*/
+#define CONFIG_SYS_IDE_MAXBUS		1	/* max. 1 IDE bus		*/
+#define CONFIG_SYS_IDE_MAXDEVICE	2	/* max. 2 drives per IDE bus	*/
 
-#define CFG_ATA_IDE0_OFFSET	0x0000
+#define CONFIG_SYS_ATA_IDE0_OFFSET	0x0000
 
-#define CFG_ATA_BASE_ADDR	MPC5XXX_ATA
+#define CONFIG_SYS_ATA_BASE_ADDR	MPC5XXX_ATA
 
 /* Offset for data I/O */
-#define CFG_ATA_DATA_OFFSET	(0x0060)
+#define CONFIG_SYS_ATA_DATA_OFFSET	(0x0060)
 
 /* Offset for normal register accesses */
-#define CFG_ATA_REG_OFFSET	(CFG_ATA_DATA_OFFSET)
+#define CONFIG_SYS_ATA_REG_OFFSET	(CONFIG_SYS_ATA_DATA_OFFSET)
 
 /* Offset for alternate registers */
-#define CFG_ATA_ALT_OFFSET	(0x005C)
+#define CONFIG_SYS_ATA_ALT_OFFSET	(0x005C)
 
 /* Interval between registers */
-#define CFG_ATA_STRIDE		4
+#define CONFIG_SYS_ATA_STRIDE		4
 
 #endif /* __CONFIG_H */
diff --git a/include/configs/BMW.h b/include/configs/BMW.h
index 11d19c6f7..24ffb0053 100644
--- a/include/configs/BMW.h
+++ b/include/configs/BMW.h
@@ -52,18 +52,18 @@
 
 #define CONFIG_CONS_INDEX	1
 #define CONFIG_BAUDRATE		9600
-#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
 
 #define CONFIG_CLOCKS_IN_MHZ	1	/* clocks passsed to Linux in MHz	*/
 
 #define CONFIG_BOOTCOMMAND	"bootm FF820000"	/* autoboot command	*/
 #define CONFIG_BOOTDELAY	5
 
-#define CFG_MAX_DOC_DEVICE      1 /* Only use Onboard TSOP-16MB device */
+#define CONFIG_SYS_MAX_DOC_DEVICE      1 /* Only use Onboard TSOP-16MB device */
 #define DOC_PASSIVE_PROBE       1
-#define CFG_DOC_SUPPORT_2000    1
-#define CFG_DOC_SUPPORT_MILLENNIUM 1
-#define CFG_DOC_SHORT_TIMEOUT    1
+#define CONFIG_SYS_DOC_SUPPORT_2000    1
+#define CONFIG_SYS_DOC_SUPPORT_MILLENNIUM 1
+#define CONFIG_SYS_DOC_SHORT_TIMEOUT    1
 
 
 /*
@@ -96,66 +96,66 @@
 /*
  * Miscellaneous configurable options
  */
-#define CFG_LONGHELP			/* undef to save memory		*/
-#define CFG_PROMPT	"=>"	        /* Monitor Command Prompt	*/
-#define CFG_CBSIZE	256		/* Console I/O Buffer Size	*/
+#define CONFIG_SYS_LONGHELP			/* undef to save memory		*/
+#define CONFIG_SYS_PROMPT	"=>"	        /* Monitor Command Prompt	*/
+#define CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size	*/
 
 /* Print Buffer Size
  */
-#define CFG_PBSIZE	(CFG_CBSIZE + sizeof(CFG_PROMPT) + 16)
+#define CONFIG_SYS_PBSIZE	(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
 
-#define CFG_MAXARGS	8		/* Max number of command args	*/
-#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size	*/
-#define CFG_LOAD_ADDR	0x00100000	/* Default load address		*/
+#define CONFIG_SYS_MAXARGS	8		/* Max number of command args	*/
+#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
+#define CONFIG_SYS_LOAD_ADDR	0x00100000	/* Default load address		*/
 
 /*-----------------------------------------------------------------------
  * Start addresses for the final memory configuration
  * (Set up by the startup code)
- * Please note that CFG_SDRAM_BASE _must_ start at 0
+ * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
  */
-#define CFG_SDRAM_BASE	    0x00000000
+#define CONFIG_SYS_SDRAM_BASE	    0x00000000
 
-#define CFG_FLASH_BASE0_PRELIM      0xFFF00000      /* FLASH bank on RCS#0 */
-#define CFG_FLASH_BASE1_PRELIM      0xFF800000      /* FLASH bank on RCS#1 */
-#define CFG_FLASH_BASE  CFG_MONITOR_BASE
-#define CFG_FLASH_BANKS		{ CFG_FLASH_BASE0_PRELIM , CFG_FLASH_BASE1_PRELIM }
+#define CONFIG_SYS_FLASH_BASE0_PRELIM      0xFFF00000      /* FLASH bank on RCS#0 */
+#define CONFIG_SYS_FLASH_BASE1_PRELIM      0xFF800000      /* FLASH bank on RCS#1 */
+#define CONFIG_SYS_FLASH_BASE  CONFIG_SYS_MONITOR_BASE
+#define CONFIG_SYS_FLASH_BANKS		{ CONFIG_SYS_FLASH_BASE0_PRELIM , CONFIG_SYS_FLASH_BASE1_PRELIM }
 
 /* even though FLASHP_BASE is FF800000, with 4MB is RCS0, the
  * reset vector is actually located at FFB00100, but the 8245
  * takes care of us.
  */
-#define CFG_RESET_ADDRESS   0xFFF00100
+#define CONFIG_SYS_RESET_ADDRESS   0xFFF00100
 
-#define CFG_EUMB_ADDR	    0xFC000000
+#define CONFIG_SYS_EUMB_ADDR	    0xFC000000
 
-#define CFG_MONITOR_BASE    TEXT_BASE
+#define CONFIG_SYS_MONITOR_BASE    TEXT_BASE
 
-#define CFG_MONITOR_LEN	    (256 << 10) /* Reserve 256 kB for Monitor	*/
-#define CFG_MALLOC_LEN	    (2048 << 10) /* Reserve 2MB for malloc()	*/
+#define CONFIG_SYS_MONITOR_LEN	    (256 << 10) /* Reserve 256 kB for Monitor	*/
+#define CONFIG_SYS_MALLOC_LEN	    (2048 << 10) /* Reserve 2MB for malloc()	*/
 
-#define CFG_MEMTEST_START   0x00004000	/* memtest works on		*/
-#define CFG_MEMTEST_END	    0x04000000	/* 0 ... 32 MB in DRAM		*/
+#define CONFIG_SYS_MEMTEST_START   0x00004000	/* memtest works on		*/
+#define CONFIG_SYS_MEMTEST_END	    0x04000000	/* 0 ... 32 MB in DRAM		*/
 
 	/* Maximum amount of RAM.
 	 */
-#define CFG_MAX_RAM_SIZE    0x04000000	/* 0 .. 64 MB of (S)DRAM */
+#define CONFIG_SYS_MAX_RAM_SIZE    0x04000000	/* 0 .. 64 MB of (S)DRAM */
 
 
-#if CFG_MONITOR_BASE >= CFG_FLASH_BASE
-#undef CFG_RAMBOOT
+#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE
+#undef CONFIG_SYS_RAMBOOT
 #else
-#define CFG_RAMBOOT
+#define CONFIG_SYS_RAMBOOT
 #endif
 
 
 /*-----------------------------------------------------------------------
  * Definitions for initial stack pointer and data area
  */
-#define CFG_INIT_RAM_ADDR CFG_SDRAM_BASE + CFG_MONITOR_LEN
-#define CFG_INIT_RAM_END   0x2F00  /* End of used area in DPRAM  */
-#define CFG_GBL_DATA_SIZE  128  /* size in bytes reserved for initial data */
-#define CFG_GBL_DATA_OFFSET  (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP_OFFSET  CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_SDRAM_BASE + CONFIG_SYS_MONITOR_LEN
+#define CONFIG_SYS_INIT_RAM_END   0x2F00  /* End of used area in DPRAM  */
+#define CONFIG_SYS_GBL_DATA_SIZE  128  /* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET  (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET  CONFIG_SYS_GBL_DATA_OFFSET
 
 /*
  * Low Level Configuration Settings
@@ -165,43 +165,43 @@
  */
 
 #define CONFIG_SYS_CLK_FREQ  33000000	/* external frequency to pll */
-#define CFG_HZ		     1000
+#define CONFIG_SYS_HZ		     1000
 
-#define CFG_ETH_DEV_FN	     0x7800
-#define CFG_ETH_IOBASE	     0x00104000
+#define CONFIG_SYS_ETH_DEV_FN	     0x7800
+#define CONFIG_SYS_ETH_IOBASE	     0x00104000
 
 	/* Bit-field values for MCCR1.
 	 */
-#define CFG_ROMNAL	    0xf
-#define CFG_ROMFAL	    0x1f
-#define CFG_DBUS_SIZE       0x3
+#define CONFIG_SYS_ROMNAL	    0xf
+#define CONFIG_SYS_ROMFAL	    0x1f
+#define CONFIG_SYS_DBUS_SIZE       0x3
 
 	/* Bit-field values for MCCR2.
 	 */
-#define CFG_TSWAIT	    0x5		    /* Transaction Start Wait States timer */
-#define CFG_REFINT	    0x400	    /* Refresh interval	FIXME: was 0t430		*/
+#define CONFIG_SYS_TSWAIT	    0x5		    /* Transaction Start Wait States timer */
+#define CONFIG_SYS_REFINT	    0x400	    /* Refresh interval	FIXME: was 0t430		*/
 
 	/* Burst To Precharge. Bits of this value go to MCCR3 and MCCR4.
 	 */
-#define CFG_BSTOPRE	    0		/* FIXME: was 192 */
+#define CONFIG_SYS_BSTOPRE	    0		/* FIXME: was 192 */
 
 	/* Bit-field values for MCCR3.
 	 */
-#define CFG_REFREC	    2	    /* Refresh to activate interval */
+#define CONFIG_SYS_REFREC	    2	    /* Refresh to activate interval */
 
 	/* Bit-field values for MCCR4.
 	 */
-#define CFG_PRETOACT	    2	    /* Precharge to activate interval FIXME: was 2	*/
-#define CFG_ACTTOPRE	    5	    /* Activate to Precharge interval FIXME: was 5	*/
-#define CFG_SDMODE_CAS_LAT  3	    /* SDMODE CAS latancy */
-#define CFG_SDMODE_WRAP	    0	    /* SDMODE wrap type	*/
-#define CFG_SDMODE_BURSTLEN 3	    /* SDMODE Burst length */
-#define CFG_ACTORW	    0xa		/* FIXME was 2 */
-#define CFG_REGISTERD_TYPE_BUFFER 1
+#define CONFIG_SYS_PRETOACT	    2	    /* Precharge to activate interval FIXME: was 2	*/
+#define CONFIG_SYS_ACTTOPRE	    5	    /* Activate to Precharge interval FIXME: was 5	*/
+#define CONFIG_SYS_SDMODE_CAS_LAT  3	    /* SDMODE CAS latancy */
+#define CONFIG_SYS_SDMODE_WRAP	    0	    /* SDMODE wrap type	*/
+#define CONFIG_SYS_SDMODE_BURSTLEN 3	    /* SDMODE Burst length */
+#define CONFIG_SYS_ACTORW	    0xa		/* FIXME was 2 */
+#define CONFIG_SYS_REGISTERD_TYPE_BUFFER 1
 
-#define CFG_PGMAX           0x0 /* how long the 8240 reatins the currently accessed page in memory FIXME: was 0x32*/
+#define CONFIG_SYS_PGMAX           0x0 /* how long the 8240 reatins the currently accessed page in memory FIXME: was 0x32*/
 
-#define CFG_SDRAM_DSCD	0x20	/* SDRAM data in sample clock delay - note bottom 3 bits MUST be 0 */
+#define CONFIG_SYS_SDRAM_DSCD	0x20	/* SDRAM data in sample clock delay - note bottom 3 bits MUST be 0 */
 
 /* Memory bank settings.
  * Only bits 20-29 are actually used from these vales to set the
@@ -210,32 +210,32 @@
  * address. Refer to the MPC8240 book.
  */
 
-#define CFG_BANK0_START	    0x00000000
-#define CFG_BANK0_END	    (CFG_MAX_RAM_SIZE - 1)
-#define CFG_BANK0_ENABLE    1
-#define CFG_BANK1_START	    0x3ff00000
-#define CFG_BANK1_END	    0x3fffffff
-#define CFG_BANK1_ENABLE    0
-#define CFG_BANK2_START	    0x3ff00000
-#define CFG_BANK2_END	    0x3fffffff
-#define CFG_BANK2_ENABLE    0
-#define CFG_BANK3_START	    0x3ff00000
-#define CFG_BANK3_END	    0x3fffffff
-#define CFG_BANK3_ENABLE    0
-#define CFG_BANK4_START	    0x3ff00000
-#define CFG_BANK4_END	    0x3fffffff
-#define CFG_BANK4_ENABLE    0
-#define CFG_BANK5_START	    0x3ff00000
-#define CFG_BANK5_END	    0x3fffffff
-#define CFG_BANK5_ENABLE    0
-#define CFG_BANK6_START	    0x3ff00000
-#define CFG_BANK6_END	    0x3fffffff
-#define CFG_BANK6_ENABLE    0
-#define CFG_BANK7_START	    0x3ff00000
-#define CFG_BANK7_END	    0x3fffffff
-#define CFG_BANK7_ENABLE    0
-
-#define CFG_ODCR	    0xff
+#define CONFIG_SYS_BANK0_START	    0x00000000
+#define CONFIG_SYS_BANK0_END	    (CONFIG_SYS_MAX_RAM_SIZE - 1)
+#define CONFIG_SYS_BANK0_ENABLE    1
+#define CONFIG_SYS_BANK1_START	    0x3ff00000
+#define CONFIG_SYS_BANK1_END	    0x3fffffff
+#define CONFIG_SYS_BANK1_ENABLE    0
+#define CONFIG_SYS_BANK2_START	    0x3ff00000
+#define CONFIG_SYS_BANK2_END	    0x3fffffff
+#define CONFIG_SYS_BANK2_ENABLE    0
+#define CONFIG_SYS_BANK3_START	    0x3ff00000
+#define CONFIG_SYS_BANK3_END	    0x3fffffff
+#define CONFIG_SYS_BANK3_ENABLE    0
+#define CONFIG_SYS_BANK4_START	    0x3ff00000
+#define CONFIG_SYS_BANK4_END	    0x3fffffff
+#define CONFIG_SYS_BANK4_ENABLE    0
+#define CONFIG_SYS_BANK5_START	    0x3ff00000
+#define CONFIG_SYS_BANK5_END	    0x3fffffff
+#define CONFIG_SYS_BANK5_ENABLE    0
+#define CONFIG_SYS_BANK6_START	    0x3ff00000
+#define CONFIG_SYS_BANK6_END	    0x3fffffff
+#define CONFIG_SYS_BANK6_ENABLE    0
+#define CONFIG_SYS_BANK7_START	    0x3ff00000
+#define CONFIG_SYS_BANK7_END	    0x3fffffff
+#define CONFIG_SYS_BANK7_ENABLE    0
+
+#define CONFIG_SYS_ODCR	    0xff
 
 #define CONFIG_PCI              1 /* Include PCI support */
 #undef CONFIG_PCI_PNP
@@ -248,60 +248,60 @@
 #include "../board/bmw/bmw.h"
 
 /* BAT configuration */
-#define CFG_IBAT0L  (CFG_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
-#define CFG_IBAT0U  (CFG_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CONFIG_SYS_IBAT0L  (CONFIG_SYS_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
+#define CONFIG_SYS_IBAT0U  (CONFIG_SYS_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
 
-#define CFG_IBAT1L  (0x70000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
-#define CFG_IBAT1U  (0x70000000 | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CONFIG_SYS_IBAT1L  (0x70000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
+#define CONFIG_SYS_IBAT1U  (0x70000000 | BATU_BL_256M | BATU_VS | BATU_VP)
 
-#define CFG_IBAT2L  (0x80000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
-#define CFG_IBAT2U  (0x80000000 | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CONFIG_SYS_IBAT2L  (0x80000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
+#define CONFIG_SYS_IBAT2U  (0x80000000 | BATU_BL_256M | BATU_VS | BATU_VP)
 
-#define CFG_IBAT3L  (0xF0000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
-#define CFG_IBAT3U  (0xF0000000 | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CONFIG_SYS_IBAT3L  (0xF0000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
+#define CONFIG_SYS_IBAT3U  (0xF0000000 | BATU_BL_256M | BATU_VS | BATU_VP)
 
-#define CFG_DBAT0L  CFG_IBAT0L
-#define CFG_DBAT0U  CFG_IBAT0U
-#define CFG_DBAT1L  CFG_IBAT1L
-#define CFG_DBAT1U  CFG_IBAT1U
-#define CFG_DBAT2L  CFG_IBAT2L
-#define CFG_DBAT2U  CFG_IBAT2U
-#define CFG_DBAT3L  CFG_IBAT3L
-#define CFG_DBAT3U  CFG_IBAT3U
+#define CONFIG_SYS_DBAT0L  CONFIG_SYS_IBAT0L
+#define CONFIG_SYS_DBAT0U  CONFIG_SYS_IBAT0U
+#define CONFIG_SYS_DBAT1L  CONFIG_SYS_IBAT1L
+#define CONFIG_SYS_DBAT1U  CONFIG_SYS_IBAT1U
+#define CONFIG_SYS_DBAT2L  CONFIG_SYS_IBAT2L
+#define CONFIG_SYS_DBAT2U  CONFIG_SYS_IBAT2U
+#define CONFIG_SYS_DBAT3L  CONFIG_SYS_IBAT3L
+#define CONFIG_SYS_DBAT3U  CONFIG_SYS_IBAT3U
 
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define CFG_BOOTMAPSZ	    (8 << 20)	/* Initial Memory map for Linux */
+#define CONFIG_SYS_BOOTMAPSZ	    (8 << 20)	/* Initial Memory map for Linux */
 
 /*
  * FLASH organization
  */
-#define CFG_MAX_FLASH_BANKS	0	/* Max number of flash banks	    */
-#define CFG_MAX_FLASH_SECT	64	/* Max number of sectors per  flash */
+#define CONFIG_SYS_MAX_FLASH_BANKS	0	/* Max number of flash banks	    */
+#define CONFIG_SYS_MAX_FLASH_SECT	64	/* Max number of sectors per  flash */
 
-#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms) */
-#define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms) */
+#define CONFIG_SYS_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms) */
+#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms) */
 
 /*
  * Warining: environment is not EMBEDDED in the U-Boot code.
  * It's stored in flash separately.
  */
-#define CFG_ENV_IS_IN_NVRAM      1
+#define CONFIG_ENV_IS_IN_NVRAM      1
 #define CONFIG_ENV_OVERWRITE     1
-#define CFG_NVRAM_ACCESS_ROUTINE 1
-#define CFG_ENV_ADDR		0x7c004000 /* right at the start of NVRAM  */
-#define CFG_ENV_SIZE		0x1ff0	/* Size of the Environment - 8K	   */
-#define CFG_ENV_OFFSET		0	/* starting right at the beginning */
+#define CONFIG_SYS_NVRAM_ACCESS_ROUTINE 1
+#define CONFIG_ENV_ADDR		0x7c004000 /* right at the start of NVRAM  */
+#define CONFIG_ENV_SIZE		0x1ff0	/* Size of the Environment - 8K	   */
+#define CONFIG_ENV_OFFSET		0	/* starting right at the beginning */
 
 /*
  * Cache Configuration
  */
-#define CFG_CACHELINE_SIZE	32
+#define CONFIG_SYS_CACHELINE_SIZE	32
 #if defined(CONFIG_CMD_KGDB)
-#  define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value   */
+#  define CONFIG_SYS_CACHELINE_SHIFT	5	/* log base 2 of the above value   */
 #endif
 
 /*
diff --git a/include/configs/CANBT.h b/include/configs/CANBT.h
index 7029dbdde..e3e6e75e8 100644
--- a/include/configs/CANBT.h
+++ b/include/configs/CANBT.h
@@ -50,7 +50,7 @@
 	"bootm ffe00000 ffe80000"
 
 #define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
-#define CFG_LOADS_BAUD_CHANGE	1	/* allow baudrate change	*/
+#define CONFIG_SYS_LOADS_BAUD_CHANGE	1	/* allow baudrate change	*/
 
 #undef	CONFIG_PCI_PNP			/* no pci plug-and-play		*/
 
@@ -84,88 +84,88 @@
 /*
  * Miscellaneous configurable options
  */
-#define CFG_LONGHELP			/* undef to save memory		*/
-#define CFG_PROMPT	"=> "		/* Monitor Command Prompt	*/
+#define CONFIG_SYS_LONGHELP			/* undef to save memory		*/
+#define CONFIG_SYS_PROMPT	"=> "		/* Monitor Command Prompt	*/
 #if defined(CONFIG_CMD_KGDB)
-#define CFG_CBSIZE	1024		/* Console I/O Buffer Size	*/
+#define CONFIG_SYS_CBSIZE	1024		/* Console I/O Buffer Size	*/
 #else
-#define CFG_CBSIZE	256		/* Console I/O Buffer Size	*/
+#define CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size	*/
 #endif
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define CFG_MAXARGS	16		/* max number of command args	*/
-#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS	16		/* max number of command args	*/
+#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
 
-#define CFG_CONSOLE_INFO_QUIET	1	/* don't print console @ startup*/
+#define CONFIG_SYS_CONSOLE_INFO_QUIET	1	/* don't print console @ startup*/
 
-#define CFG_MEMTEST_START	0x0400000	/* memtest works on	*/
-#define CFG_MEMTEST_END		0x0C00000	/* 4 ... 12 MB in DRAM	*/
+#define CONFIG_SYS_MEMTEST_START	0x0400000	/* memtest works on	*/
+#define CONFIG_SYS_MEMTEST_END		0x0C00000	/* 4 ... 12 MB in DRAM	*/
 
-#define CFG_EXT_SERIAL_CLOCK	14745600 /* use external serial clock	*/
+#define CONFIG_SYS_EXT_SERIAL_CLOCK	14745600 /* use external serial clock	*/
 
 /* The following table includes the supported baudrates */
-#define CFG_BAUDRATE_TABLE	\
+#define CONFIG_SYS_BAUDRATE_TABLE	\
 	{ 300, 600, 1200, 2400, 4800, 9600, 19200, 38400,     \
 	 57600, 115200, 230400, 460800, 921600 }
 
-#define CFG_LOAD_ADDR	0x100000	/* default load address */
-#define CFG_EXTBDINFO	1		/* To use extended board_into (bd_t) */
+#define CONFIG_SYS_LOAD_ADDR	0x100000	/* default load address */
+#define CONFIG_SYS_EXTBDINFO	1		/* To use extended board_into (bd_t) */
 
-#define CFG_HZ		1000		/* decrementer freq: 1 ms ticks */
+#define CONFIG_SYS_HZ		1000		/* decrementer freq: 1 ms ticks */
 
 #define CONFIG_ZERO_BOOTDELAY_CHECK	/* check for keypress on bootdelay==0 */
 
 /*-----------------------------------------------------------------------
  * Start addresses for the final memory configuration
  * (Set up by the startup code)
- * Please note that CFG_SDRAM_BASE _must_ start at 0
+ * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
  */
-#define CFG_SDRAM_BASE		0x00000000
-#define CFG_FLASH_BASE		0xFFFE0000
-#define CFG_MONITOR_BASE	CFG_FLASH_BASE
-#define CFG_MONITOR_LEN		(128 * 1024)	/* Reserve 128 kB for Monitor	*/
-#define CFG_MALLOC_LEN		(128 * 1024)	/* Reserve 128 kB for malloc()	*/
+#define CONFIG_SYS_SDRAM_BASE		0x00000000
+#define CONFIG_SYS_FLASH_BASE		0xFFFE0000
+#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_FLASH_BASE
+#define CONFIG_SYS_MONITOR_LEN		(128 * 1024)	/* Reserve 128 kB for Monitor	*/
+#define CONFIG_SYS_MALLOC_LEN		(128 * 1024)	/* Reserve 128 kB for malloc()	*/
 
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
+#define CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
 /*-----------------------------------------------------------------------
  * FLASH organization
  */
-#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
-#define CFG_MAX_FLASH_SECT	256	/* max number of sectors on one chip	*/
+#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
+#define CONFIG_SYS_MAX_FLASH_SECT	256	/* max number of sectors on one chip	*/
 
-#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
-#define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
+#define CONFIG_SYS_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
+#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
 
-#define CFG_FLASH_WORD_SIZE	unsigned short	/* flash word size (width)	*/
-#define CFG_FLASH_ADDR0		0x5555	/* 1st address for flash config cycles	*/
-#define CFG_FLASH_ADDR1		0x2AAA	/* 2nd address for flash config cycles	*/
+#define CONFIG_SYS_FLASH_WORD_SIZE	unsigned short	/* flash word size (width)	*/
+#define CONFIG_SYS_FLASH_ADDR0		0x5555	/* 1st address for flash config cycles	*/
+#define CONFIG_SYS_FLASH_ADDR1		0x2AAA	/* 2nd address for flash config cycles	*/
 /*
  * The following defines are added for buggy IOP480 byte interface.
  * All other boards should use the standard values (CPCI405 etc.)
  */
-#define CFG_FLASH_READ0		0x0000	/* 0 is standard			*/
-#define CFG_FLASH_READ1		0x0001	/* 1 is standard			*/
-#define CFG_FLASH_READ2		0x0002	/* 2 is standard			*/
+#define CONFIG_SYS_FLASH_READ0		0x0000	/* 0 is standard			*/
+#define CONFIG_SYS_FLASH_READ1		0x0001	/* 1 is standard			*/
+#define CONFIG_SYS_FLASH_READ2		0x0002	/* 2 is standard			*/
 
-#define CFG_FLASH_EMPTY_INFO		/* print 'E' for empty sector on flinfo */
+#define CONFIG_SYS_FLASH_EMPTY_INFO		/* print 'E' for empty sector on flinfo */
 
 #if 0 /* Use FLASH for environment variables */
 
-#define CFG_ENV_IS_IN_FLASH	1
-#define CFG_ENV_OFFSET		0x00010000	/* Offset of Environment Sector */
-#define CFG_ENV_SIZE		0x1000	/* Total Size of Environment Sector	*/
+#define CONFIG_ENV_IS_IN_FLASH	1
+#define CONFIG_ENV_OFFSET		0x00010000	/* Offset of Environment Sector */
+#define CONFIG_ENV_SIZE		0x1000	/* Total Size of Environment Sector	*/
 
-#define CFG_ENV_SECT_SIZE	0x10000 /* see README - env sector total size	*/
+#define CONFIG_ENV_SECT_SIZE	0x10000 /* see README - env sector total size	*/
 
 #else /* Use EEPROM for environment variables */
 
-#define CFG_ENV_IS_IN_EEPROM	1	/* use EEPROM for environment vars */
-#define CFG_ENV_OFFSET		0x000	/* environment starts at the beginning of the EEPROM */
-#define CFG_ENV_SIZE		0x400	/* 1024 bytes may be used for env vars */
+#define CONFIG_ENV_IS_IN_EEPROM	1	/* use EEPROM for environment vars */
+#define CONFIG_ENV_OFFSET		0x000	/* environment starts at the beginning of the EEPROM */
+#define CONFIG_ENV_SIZE		0x400	/* 1024 bytes may be used for env vars */
 				   /* total size of a CAT24WC08 is 1024 bytes */
 #endif
 
@@ -173,13 +173,13 @@
  * I2C EEPROM (CAT24WC08) for environment
  */
 #define CONFIG_HARD_I2C			/* I2C with hardware support */
-#define CFG_I2C_SPEED		400000	/* I2C speed and slave address */
-#define CFG_I2C_SLAVE		0x7F
+#define CONFIG_SYS_I2C_SPEED		400000	/* I2C speed and slave address */
+#define CONFIG_SYS_I2C_SLAVE		0x7F
 
-#define CFG_I2C_EEPROM_ADDR	0x50	/* EEPROM CAT28WC08		*/
-#define CFG_I2C_EEPROM_ADDR_LEN 1	/* bytes of address		*/
+#define CONFIG_SYS_I2C_EEPROM_ADDR	0x50	/* EEPROM CAT28WC08		*/
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1	/* bytes of address		*/
 /* mask of address bits that overflow into the "EEPROM chip address"	*/
-#define CFG_I2C_EEPROM_ADDR_OVERFLOW	0x07
+#define CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW	0x07
 
 /*
  * Init Memory Controller:
@@ -195,29 +195,29 @@
  */
 
 /* Memory Bank 0 (Flash Bank 0) initialization					*/
-#define CFG_EBC_PB0AP		0x92015480
-#define CFG_EBC_PB0CR		0xFFC5A000  /* BAS=0xFFC,BS=4MB,BU=R/W,BW=16bit */
+#define CONFIG_SYS_EBC_PB0AP		0x92015480
+#define CONFIG_SYS_EBC_PB0CR		0xFFC5A000  /* BAS=0xFFC,BS=4MB,BU=R/W,BW=16bit */
 
 /* Memory Bank 1 (CAN/USB) initialization					*/
-#define CFG_EBC_PB1AP		0x010053C0  /* enable Ready, BEM=1		*/
-#define CFG_EBC_PB1CR		0xF0018000  /* BAS=0xF00,BS=1MB,BU=R/W,BW=8bit	*/
+#define CONFIG_SYS_EBC_PB1AP		0x010053C0  /* enable Ready, BEM=1		*/
+#define CONFIG_SYS_EBC_PB1CR		0xF0018000  /* BAS=0xF00,BS=1MB,BU=R/W,BW=8bit	*/
 
 /* Memory Bank 2 (Misc-IO/LEDs) initialization					*/
-#define CFG_EBC_PB2AP		0x000004c0  /* no Ready, BEM=1			*/
-#define CFG_EBC_PB2CR		0xF0118000  /* BAS=0xF01,BS=1MB,BU=R/W,BW=8bit	*/
+#define CONFIG_SYS_EBC_PB2AP		0x000004c0  /* no Ready, BEM=1			*/
+#define CONFIG_SYS_EBC_PB2CR		0xF0118000  /* BAS=0xF01,BS=1MB,BU=R/W,BW=8bit	*/
 
 /* Memory Bank 3 (CAN Features) initialization					*/
-#define CFG_EBC_PB3AP		0x80000040  /* no Ready, BEM=1			*/
-#define CFG_EBC_PB3CR		0xF021C000  /* BAS=0xF02,BS=1MB,BU=R/W,BW=32bit */
+#define CONFIG_SYS_EBC_PB3AP		0x80000040  /* no Ready, BEM=1			*/
+#define CONFIG_SYS_EBC_PB3CR		0xF021C000  /* BAS=0xF02,BS=1MB,BU=R/W,BW=32bit */
 
 /*-----------------------------------------------------------------------
  * Definitions for initial stack pointer and data area (in RAM)
  */
-#define CFG_INIT_RAM_ADDR	0x00ef0000 /* inside of SDRAM			*/
-#define CFG_INIT_RAM_END	0x0f00	/* End of used area in RAM	       */
-#define CFG_GBL_DATA_SIZE	64  /* size in bytes reserved for initial data */
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_INIT_RAM_ADDR	0x00ef0000 /* inside of SDRAM			*/
+#define CONFIG_SYS_INIT_RAM_END	0x0f00	/* End of used area in RAM	       */
+#define CONFIG_SYS_GBL_DATA_SIZE	64  /* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
 
 /*
diff --git a/include/configs/CATcenter.h b/include/configs/CATcenter.h
index 1603c9c0b..a44f3e16c 100644
--- a/include/configs/CATcenter.h
+++ b/include/configs/CATcenter.h
@@ -63,7 +63,7 @@
 #define __DISABLE_MACHINE_EXCEPTION__
 
 #ifdef __DEBUG_START_FROM_SRAM__
-#define CFG_DUMMY_FLASH_SIZE		1024*1024*4
+#define CONFIG_SYS_DUMMY_FLASH_SIZE		1024*1024*4
 #endif
 
 /*
@@ -102,7 +102,7 @@
 #define CONFIG_ETH1ADDR 00:50:C2:1E:AF:FD
 
 #define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
-#define CFG_LOADS_BAUD_CHANGE	1	/* allow baudrate change	*/
+#define CONFIG_SYS_LOADS_BAUD_CHANGE	1	/* allow baudrate change	*/
 
 
 #undef CONFIG_EXT_PHY
@@ -152,50 +152,50 @@
 #undef	CONFIG_WATCHDOG			/* watchdog disabled		*/
 
 #define CONFIG_RTC_MC146818		/* DS1685 is MC146818 compatible*/
-#define CFG_RTC_REG_BASE_ADDR	 0xF0000500 /* RTC Base Address		*/
+#define CONFIG_SYS_RTC_REG_BASE_ADDR	 0xF0000500 /* RTC Base Address		*/
 
 #define CONFIG_SDRAM_BANK0	1	/* init onboard SDRAM bank 0	*/
 
 /*
  * Miscellaneous configurable options
  */
-#define CFG_LONGHELP			/* undef to save memory		*/
-#define CFG_PROMPT		"=> "	/* Monitor Command Prompt	*/
+#define CONFIG_SYS_LONGHELP			/* undef to save memory		*/
+#define CONFIG_SYS_PROMPT		"=> "	/* Monitor Command Prompt	*/
 
-#define	CFG_HUSH_PARSER			/* use "hush" command parser	*/
-#ifdef	CFG_HUSH_PARSER
-#define CFG_PROMPT_HUSH_PS2	"> "
+#define	CONFIG_SYS_HUSH_PARSER			/* use "hush" command parser	*/
+#ifdef	CONFIG_SYS_HUSH_PARSER
+#define CONFIG_SYS_PROMPT_HUSH_PS2	"> "
 #endif
 
 #if defined(CONFIG_CMD_KGDB)
-#define CFG_CBSIZE	1024		/* Console I/O Buffer Size	*/
+#define CONFIG_SYS_CBSIZE	1024		/* Console I/O Buffer Size	*/
 #else
-#define CFG_CBSIZE	256		/* Console I/O Buffer Size	*/
+#define CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size	*/
 #endif
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define CFG_MAXARGS	16		/* max number of command args	*/
-#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS	16		/* max number of command args	*/
+#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
 
-#define CFG_DEVICE_NULLDEV	1	/* include nulldev device	*/
+#define CONFIG_SYS_DEVICE_NULLDEV	1	/* include nulldev device	*/
 
-#define CFG_CONSOLE_INFO_QUIET	1	/* don't print console @ startup*/
+#define CONFIG_SYS_CONSOLE_INFO_QUIET	1	/* don't print console @ startup*/
 
-#define CFG_MEMTEST_START	0x0400000	/* memtest works on	*/
-#define CFG_MEMTEST_END		0x0C00000	/* 4 ... 12 MB in DRAM	*/
+#define CONFIG_SYS_MEMTEST_START	0x0400000	/* memtest works on	*/
+#define CONFIG_SYS_MEMTEST_END		0x0C00000	/* 4 ... 12 MB in DRAM	*/
 
-#undef	CFG_EXT_SERIAL_CLOCK		/* no external serial clock used */
-#define CFG_IGNORE_405_UART_ERRATA_59	/* ignore ppc405gp errata #59	*/
-#define CFG_BASE_BAUD		691200
+#undef	CONFIG_SYS_EXT_SERIAL_CLOCK		/* no external serial clock used */
+#define CONFIG_SYS_IGNORE_405_UART_ERRATA_59	/* ignore ppc405gp errata #59	*/
+#define CONFIG_SYS_BASE_BAUD		691200
 
 /* The following table includes the supported baudrates */
-#define CFG_BAUDRATE_TABLE	\
+#define CONFIG_SYS_BAUDRATE_TABLE	\
 	{ 300, 600, 1200, 2400, 4800, 9600, 19200, 38400,     \
 	 57600, 115200, 230400, 460800, 921600 }
 
-#define CFG_LOAD_ADDR	0x100000	/* default load address */
-#define CFG_EXTBDINFO	1		/* To use extended board_into (bd_t) */
+#define CONFIG_SYS_LOAD_ADDR	0x100000	/* default load address */
+#define CONFIG_SYS_EXTBDINFO	1		/* To use extended board_into (bd_t) */
 
-#define CFG_HZ		1000		/* decrementer freq: 1 ms ticks */
+#define CONFIG_SYS_HZ		1000		/* decrementer freq: 1 ms ticks */
 
 #define CONFIG_ZERO_BOOTDELAY_CHECK	/* check for keypress on bootdelay==0 */
 
@@ -203,13 +203,13 @@
  * NAND-FLASH stuff
  *-----------------------------------------------------------------------
  */
-#define CFG_NAND0_BASE 0xFF400000
-#define CFG_NAND1_BASE 0xFF000000
-#define CFG_NAND_BASE_LIST	{ CFG_NAND0_BASE }
+#define CONFIG_SYS_NAND0_BASE 0xFF400000
+#define CONFIG_SYS_NAND1_BASE 0xFF000000
+#define CONFIG_SYS_NAND_BASE_LIST	{ CONFIG_SYS_NAND0_BASE }
 #define NAND_BIG_DELAY_US	25
 
 /* For CATcenter there is only NAND on the module */
-#define CFG_MAX_NAND_DEVICE	1	/* Max number of NAND devices		*/
+#define CONFIG_SYS_MAX_NAND_DEVICE	1	/* Max number of NAND devices		*/
 #define SECTORSIZE 512
 #define NAND_NO_RB
 
@@ -221,26 +221,26 @@
 #define NAND_MAX_FLOORS 1
 #define NAND_MAX_CHIPS 1
 
-#define CFG_NAND0_CE  (0x80000000 >> 1)	 /* our CE is GPIO1 */
-#define CFG_NAND0_CLE (0x80000000 >> 2)	 /* our CLE is GPIO2 */
-#define CFG_NAND0_ALE (0x80000000 >> 3)	 /* our ALE is GPIO3 */
-#define CFG_NAND0_RDY (0x80000000 >> 4)	 /* our RDY is GPIO4 */
+#define CONFIG_SYS_NAND0_CE  (0x80000000 >> 1)	 /* our CE is GPIO1 */
+#define CONFIG_SYS_NAND0_CLE (0x80000000 >> 2)	 /* our CLE is GPIO2 */
+#define CONFIG_SYS_NAND0_ALE (0x80000000 >> 3)	 /* our ALE is GPIO3 */
+#define CONFIG_SYS_NAND0_RDY (0x80000000 >> 4)	 /* our RDY is GPIO4 */
 
-#define CFG_NAND1_CE  (0x80000000 >> 14)  /* our CE is GPIO14 */
-#define CFG_NAND1_CLE (0x80000000 >> 15)  /* our CLE is GPIO15 */
-#define CFG_NAND1_ALE (0x80000000 >> 16)  /* our ALE is GPIO16 */
-#define CFG_NAND1_RDY (0x80000000 >> 31)  /* our RDY is GPIO31 */
+#define CONFIG_SYS_NAND1_CE  (0x80000000 >> 14)  /* our CE is GPIO14 */
+#define CONFIG_SYS_NAND1_CLE (0x80000000 >> 15)  /* our CLE is GPIO15 */
+#define CONFIG_SYS_NAND1_ALE (0x80000000 >> 16)  /* our ALE is GPIO16 */
+#define CONFIG_SYS_NAND1_RDY (0x80000000 >> 31)  /* our RDY is GPIO31 */
 
 
 #define MACRO_NAND_DISABLE_CE(nandptr) do \
 { \
 	switch((unsigned long)nandptr) \
 	{ \
-	    case CFG_NAND0_BASE: \
-		out32(GPIO0_OR, in32(GPIO0_OR) | CFG_NAND0_CE); \
+	    case CONFIG_SYS_NAND0_BASE: \
+		out32(GPIO0_OR, in32(GPIO0_OR) | CONFIG_SYS_NAND0_CE); \
 		break; \
-	    case CFG_NAND1_BASE: \
-		out32(GPIO0_OR, in32(GPIO0_OR) | CFG_NAND1_CE); \
+	    case CONFIG_SYS_NAND1_BASE: \
+		out32(GPIO0_OR, in32(GPIO0_OR) | CONFIG_SYS_NAND1_CE); \
 		break; \
 	} \
 } while(0)
@@ -249,11 +249,11 @@
 { \
 	switch((unsigned long)nandptr) \
 	{ \
-	    case CFG_NAND0_BASE: \
-		out32(GPIO0_OR, in32(GPIO0_OR) & ~CFG_NAND0_CE); \
+	    case CONFIG_SYS_NAND0_BASE: \
+		out32(GPIO0_OR, in32(GPIO0_OR) & ~CONFIG_SYS_NAND0_CE); \
 		break; \
-	    case CFG_NAND1_BASE: \
-		out32(GPIO0_OR, in32(GPIO0_OR) & ~CFG_NAND1_CE); \
+	    case CONFIG_SYS_NAND1_BASE: \
+		out32(GPIO0_OR, in32(GPIO0_OR) & ~CONFIG_SYS_NAND1_CE); \
 		break; \
 	} \
 } while(0)
@@ -262,11 +262,11 @@
 { \
 	switch((unsigned long)nandptr) \
 	{ \
-	    case CFG_NAND0_BASE: \
-		out32(GPIO0_OR, in32(GPIO0_OR) & ~CFG_NAND0_ALE); \
+	    case CONFIG_SYS_NAND0_BASE: \
+		out32(GPIO0_OR, in32(GPIO0_OR) & ~CONFIG_SYS_NAND0_ALE); \
 		break; \
-	    case CFG_NAND1_BASE: \
-		out32(GPIO0_OR, in32(GPIO0_OR) & ~CFG_NAND1_ALE); \
+	    case CONFIG_SYS_NAND1_BASE: \
+		out32(GPIO0_OR, in32(GPIO0_OR) & ~CONFIG_SYS_NAND1_ALE); \
 		break; \
 	} \
 } while(0)
@@ -275,11 +275,11 @@
 { \
 	switch((unsigned long)nandptr) \
 	{ \
-	    case CFG_NAND0_BASE: \
-		out32(GPIO0_OR, in32(GPIO0_OR) | CFG_NAND0_ALE); \
+	    case CONFIG_SYS_NAND0_BASE: \
+		out32(GPIO0_OR, in32(GPIO0_OR) | CONFIG_SYS_NAND0_ALE); \
 		break; \
-	    case CFG_NAND1_BASE: \
-		out32(GPIO0_OR, in32(GPIO0_OR) | CFG_NAND1_ALE); \
+	    case CONFIG_SYS_NAND1_BASE: \
+		out32(GPIO0_OR, in32(GPIO0_OR) | CONFIG_SYS_NAND1_ALE); \
 		break; \
 	} \
 } while(0)
@@ -288,22 +288,22 @@
 { \
 	switch((unsigned long)nandptr) \
 	{ \
-	    case CFG_NAND0_BASE: \
-		out32(GPIO0_OR, in32(GPIO0_OR) & ~CFG_NAND0_CLE); \
+	    case CONFIG_SYS_NAND0_BASE: \
+		out32(GPIO0_OR, in32(GPIO0_OR) & ~CONFIG_SYS_NAND0_CLE); \
 		break; \
-	    case CFG_NAND1_BASE: \
-		out32(GPIO0_OR, in32(GPIO0_OR) & ~CFG_NAND1_CLE); \
+	    case CONFIG_SYS_NAND1_BASE: \
+		out32(GPIO0_OR, in32(GPIO0_OR) & ~CONFIG_SYS_NAND1_CLE); \
 		break; \
 	} \
 } while(0)
 
 #define MACRO_NAND_CTL_SETCLE(nandptr) do { \
 	switch((unsigned long)nandptr) { \
-	case CFG_NAND0_BASE: \
-		out32(GPIO0_OR, in32(GPIO0_OR) | CFG_NAND0_CLE); \
+	case CONFIG_SYS_NAND0_BASE: \
+		out32(GPIO0_OR, in32(GPIO0_OR) | CONFIG_SYS_NAND0_CLE); \
 		break; \
-	case CFG_NAND1_BASE: \
-		out32(GPIO0_OR, in32(GPIO0_OR) | CFG_NAND1_CLE); \
+	case CONFIG_SYS_NAND1_BASE: \
+		out32(GPIO0_OR, in32(GPIO0_OR) | CONFIG_SYS_NAND1_CLE); \
 		break; \
 	} \
 } while(0)
@@ -339,96 +339,95 @@
 
 #define CONFIG_PCI_SCAN_SHOW		/* print pci devices @ startup	*/
 
-#define CFG_PCI_SUBSYS_VENDORID 0x1014	/* PCI Vendor ID: IBM	*/
-#define CFG_PCI_SUBSYS_DEVICEID 0x0000	/* PCI Device ID: ---	*/
-#define CFG_PCI_CLASSCODE	0x0b20	/* PCI Class Code: Processor/PPC*/
+#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x1014	/* PCI Vendor ID: IBM	*/
+#define CONFIG_SYS_PCI_SUBSYS_DEVICEID 0x0000	/* PCI Device ID: ---	*/
+#define CONFIG_SYS_PCI_CLASSCODE	0x0b20	/* PCI Class Code: Processor/PPC*/
 
-#define CFG_PCI_PTM1LA	0x00000000	/* point to sdram		*/
-#define CFG_PCI_PTM1MS	0xfc000001	/* 64MB, enable hard-wired to 1 */
-#define CFG_PCI_PTM1PCI 0x00000000	/* Host: use this pci address	*/
-#define CFG_PCI_PTM2LA	0xffc00000	/* point to flash		*/
-#define CFG_PCI_PTM2MS	0xffc00001	/* 4MB, enable			*/
-#define CFG_PCI_PTM2PCI 0x04000000	/* Host: use this pci address	*/
+#define CONFIG_SYS_PCI_PTM1LA	0x00000000	/* point to sdram		*/
+#define CONFIG_SYS_PCI_PTM1MS	0xfc000001	/* 64MB, enable hard-wired to 1 */
+#define CONFIG_SYS_PCI_PTM1PCI 0x00000000	/* Host: use this pci address	*/
+#define CONFIG_SYS_PCI_PTM2LA	0xffc00000	/* point to flash		*/
+#define CONFIG_SYS_PCI_PTM2MS	0xffc00001	/* 4MB, enable			*/
+#define CONFIG_SYS_PCI_PTM2PCI 0x04000000	/* Host: use this pci address	*/
 #endif	/* No PCI */
 
 /*-----------------------------------------------------------------------
  * Start addresses for the final memory configuration
  * (Set up by the startup code)
- * Please note that CFG_SDRAM_BASE _must_ start at 0
+ * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
  */
-#define CFG_SDRAM_BASE		0x00000000
-#define CFG_FLASH_BASE		0xFFFC0000
-#define CFG_MONITOR_BASE	CFG_FLASH_BASE
-#define CFG_MONITOR_LEN		(256 * 1024)	/* Reserve 256 kB for Monitor	*/
-#define CFG_MALLOC_LEN		(256 * 1024)	/* Reserve 256 kB for malloc()	*/
+#define CONFIG_SYS_SDRAM_BASE		0x00000000
+#define CONFIG_SYS_FLASH_BASE		0xFFFC0000
+#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_FLASH_BASE
+#define CONFIG_SYS_MONITOR_LEN		(256 * 1024)	/* Reserve 256 kB for Monitor	*/
+#define CONFIG_SYS_MALLOC_LEN		(256 * 1024)	/* Reserve 256 kB for malloc()	*/
 
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
+#define CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
 /*-----------------------------------------------------------------------
  * FLASH organization
  */
-#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
-#define CFG_MAX_FLASH_SECT	256	/* max number of sectors on one chip	*/
+#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
+#define CONFIG_SYS_MAX_FLASH_SECT	256	/* max number of sectors on one chip	*/
 
-#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
-#define CFG_FLASH_WRITE_TOUT	1000	/* Timeout for Flash Write (in ms)	*/
+#define CONFIG_SYS_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
+#define CONFIG_SYS_FLASH_WRITE_TOUT	1000	/* Timeout for Flash Write (in ms)	*/
 
-#define CFG_FLASH_WORD_SIZE	unsigned short	/* flash word size (width)	*/
-#define CFG_FLASH_ADDR0		0x5555	/* 1st address for flash config cycles	*/
-#define CFG_FLASH_ADDR1		0x2AAA	/* 2nd address for flash config cycles	*/
+#define CONFIG_SYS_FLASH_WORD_SIZE	unsigned short	/* flash word size (width)	*/
+#define CONFIG_SYS_FLASH_ADDR0		0x5555	/* 1st address for flash config cycles	*/
+#define CONFIG_SYS_FLASH_ADDR1		0x2AAA	/* 2nd address for flash config cycles	*/
 /*
  * The following defines are added for buggy IOP480 byte interface.
  * All other boards should use the standard values (CPCI405 etc.)
  */
-#define CFG_FLASH_READ0		0x0000	/* 0 is standard			*/
-#define CFG_FLASH_READ1		0x0001	/* 1 is standard			*/
-#define CFG_FLASH_READ2		0x0002	/* 2 is standard			*/
+#define CONFIG_SYS_FLASH_READ0		0x0000	/* 0 is standard			*/
+#define CONFIG_SYS_FLASH_READ1		0x0001	/* 1 is standard			*/
+#define CONFIG_SYS_FLASH_READ2		0x0002	/* 2 is standard			*/
 
-#define CFG_FLASH_EMPTY_INFO		/* print 'E' for empty sector on flinfo */
+#define CONFIG_SYS_FLASH_EMPTY_INFO		/* print 'E' for empty sector on flinfo */
 
 /*-----------------------------------------------------------------------
  * Environment Variable setup
  */
-#define CFG_ENV_IS_IN_FLASH	1	/* use FLASH for environment vars */
-#define CFG_ENV_ADDR		0xFFFF8000	/* environment starts at the first small sector */
-#define CFG_ENV_SECT_SIZE	0x2000	/* 8196 bytes may be used for env vars*/
-#define CFG_ENV_ADDR_REDUND	0xFFFFA000
-#define CFG_ENV_SIZE_REDUND	0x2000
+#define CONFIG_ENV_IS_IN_FLASH	1	/* use FLASH for environment vars */
+#define CONFIG_ENV_ADDR		0xFFFF8000	/* environment starts at the first small sector */
+#define CONFIG_ENV_SECT_SIZE	0x2000	/* 8196 bytes may be used for env vars*/
+#define CONFIG_ENV_ADDR_REDUND	0xFFFFA000
+#define CONFIG_ENV_SIZE_REDUND	0x2000
 
-#define	CFG_USE_PPCENV			/* Environment embedded in sect .ppcenv */
+#define	CONFIG_SYS_USE_PPCENV			/* Environment embedded in sect .ppcenv */
 
-#define CFG_NVRAM_BASE_ADDR	0xF0000500		/* NVRAM base address	*/
-#define CFG_NVRAM_SIZE		242			/* NVRAM size		*/
+#define CONFIG_SYS_NVRAM_BASE_ADDR	0xF0000500		/* NVRAM base address	*/
+#define CONFIG_SYS_NVRAM_SIZE		242			/* NVRAM size		*/
 
 /*-----------------------------------------------------------------------
  * I2C EEPROM (CAT24WC16) for environment
  */
 #define CONFIG_HARD_I2C			/* I2c with hardware support */
-#define CFG_I2C_SPEED		400000	/* I2C speed and slave address */
-#define CFG_I2C_SLAVE		0x7F
+#define CONFIG_SYS_I2C_SPEED		400000	/* I2C speed and slave address */
+#define CONFIG_SYS_I2C_SLAVE		0x7F
 
-#define CFG_I2C_EEPROM_ADDR	0x50	/* EEPROM CAT28WC08		*/
-#define CFG_I2C_EEPROM_ADDR_LEN 1	/* Bytes of address		*/
+#define CONFIG_SYS_I2C_EEPROM_ADDR	0x50	/* EEPROM CAT28WC08		*/
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1	/* Bytes of address		*/
 /* mask of address bits that overflow into the "EEPROM chip address"	*/
-/*#define CFG_I2C_EEPROM_ADDR_OVERFLOW	0x07*/
-#define CFG_EEPROM_PAGE_WRITE_BITS 4	/* The Catalyst CAT24WC08 has	*/
+/*#define CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW	0x07*/
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 4	/* The Catalyst CAT24WC08 has	*/
 					/* 16 byte page write mode using*/
 					/* last 4 bits of the address	*/
-#define CFG_EEPROM_PAGE_WRITE_DELAY_MS	10   /* and takes up to 10 msec */
-#define CFG_EEPROM_PAGE_WRITE_ENABLE
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	10   /* and takes up to 10 msec */
 
 /*-----------------------------------------------------------------------
  * Cache Configuration
  */
-#define CFG_DCACHE_SIZE		16384	/* For AMCC 405 CPUs, older 405 ppc's	*/
+#define CONFIG_SYS_DCACHE_SIZE		16384	/* For AMCC 405 CPUs, older 405 ppc's	*/
 					/* have only 8kB, 16kB is save here	*/
-#define CFG_CACHELINE_SIZE	32	/* ...			*/
+#define CONFIG_SYS_CACHELINE_SIZE	32	/* ...			*/
 #if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value	*/
+#define CONFIG_SYS_CACHELINE_SHIFT	5	/* log base 2 of the above value	*/
 #endif
 
 /*
@@ -444,21 +443,21 @@
  */
 
 /* Memory Bank 0 (Flash Bank 0, NOR-FLASH) initialization			*/
-#define CFG_EBC_PB0AP		0x92015480
-#define CFG_EBC_PB0CR		0xFFC5A000  /* BAS=0xFFC,BS=4MB,BU=R/W,BW=16bit */
+#define CONFIG_SYS_EBC_PB0AP		0x92015480
+#define CONFIG_SYS_EBC_PB0CR		0xFFC5A000  /* BAS=0xFFC,BS=4MB,BU=R/W,BW=16bit */
 
 /* Memory Bank 1 (External SRAM) initialization					*/
 /* Since this must replace NOR Flash, we use the same settings for CS0		*/
-#define CFG_EBC_PB1AP		0x92015480
-#define CFG_EBC_PB1CR		0xFF85A000  /* BAS=0xFF8,BS=4MB,BU=R/W,BW=8bit	*/
+#define CONFIG_SYS_EBC_PB1AP		0x92015480
+#define CONFIG_SYS_EBC_PB1CR		0xFF85A000  /* BAS=0xFF8,BS=4MB,BU=R/W,BW=8bit	*/
 
 /* Memory Bank 2 (Flash Bank 1, NAND-FLASH) initialization			*/
-#define CFG_EBC_PB2AP		0x92015480
-#define CFG_EBC_PB2CR		0xFF458000  /* BAS=0xFF4,BS=4MB,BU=R/W,BW=8bit	*/
+#define CONFIG_SYS_EBC_PB2AP		0x92015480
+#define CONFIG_SYS_EBC_PB2CR		0xFF458000  /* BAS=0xFF4,BS=4MB,BU=R/W,BW=8bit	*/
 
 /* Memory Bank 3 (Flash Bank 2, NAND-FLASH) initialization			*/
-#define CFG_EBC_PB3AP		0x92015480
-#define CFG_EBC_PB3CR		0xFF058000  /* BAS=0xFF0,BS=4MB,BU=R/W,BW=8bit	*/
+#define CONFIG_SYS_EBC_PB3AP		0x92015480
+#define CONFIG_SYS_EBC_PB3CR		0xFF058000  /* BAS=0xFF0,BS=4MB,BU=R/W,BW=8bit	*/
 
 #ifdef CONFIG_PPCHAMELEON_SMI712
 /*
@@ -472,66 +471,66 @@
 #define CONFIG_CONSOLE_EXTRA_INFO
 #define CONFIG_VGA_AS_SINGLE_DEVICE
 /* This is the base address (on 405EP-side) used to generate I/O accesses on PCI bus */
-#define CFG_ISA_IO 0xE8000000
+#define CONFIG_SYS_ISA_IO 0xE8000000
 /* see also drivers/video/videomodes.c */
-#define CFG_DEFAULT_VIDEO_MODE 0x303
+#define CONFIG_SYS_DEFAULT_VIDEO_MODE 0x303
 #endif
 
 /*-----------------------------------------------------------------------
  * FPGA stuff
  */
 /* FPGA internal regs */
-#define CFG_FPGA_MODE		0x00
-#define CFG_FPGA_STATUS		0x02
-#define CFG_FPGA_TS		0x04
-#define CFG_FPGA_TS_LOW		0x06
-#define CFG_FPGA_TS_CAP0	0x10
-#define CFG_FPGA_TS_CAP0_LOW	0x12
-#define CFG_FPGA_TS_CAP1	0x14
-#define CFG_FPGA_TS_CAP1_LOW	0x16
-#define CFG_FPGA_TS_CAP2	0x18
-#define CFG_FPGA_TS_CAP2_LOW	0x1a
-#define CFG_FPGA_TS_CAP3	0x1c
-#define CFG_FPGA_TS_CAP3_LOW	0x1e
+#define CONFIG_SYS_FPGA_MODE		0x00
+#define CONFIG_SYS_FPGA_STATUS		0x02
+#define CONFIG_SYS_FPGA_TS		0x04
+#define CONFIG_SYS_FPGA_TS_LOW		0x06
+#define CONFIG_SYS_FPGA_TS_CAP0	0x10
+#define CONFIG_SYS_FPGA_TS_CAP0_LOW	0x12
+#define CONFIG_SYS_FPGA_TS_CAP1	0x14
+#define CONFIG_SYS_FPGA_TS_CAP1_LOW	0x16
+#define CONFIG_SYS_FPGA_TS_CAP2	0x18
+#define CONFIG_SYS_FPGA_TS_CAP2_LOW	0x1a
+#define CONFIG_SYS_FPGA_TS_CAP3	0x1c
+#define CONFIG_SYS_FPGA_TS_CAP3_LOW	0x1e
 
 /* FPGA Mode Reg */
-#define CFG_FPGA_MODE_CF_RESET	0x0001
-#define CFG_FPGA_MODE_TS_IRQ_ENABLE 0x0100
-#define CFG_FPGA_MODE_TS_IRQ_CLEAR  0x1000
-#define CFG_FPGA_MODE_TS_CLEAR	0x2000
+#define CONFIG_SYS_FPGA_MODE_CF_RESET	0x0001
+#define CONFIG_SYS_FPGA_MODE_TS_IRQ_ENABLE 0x0100
+#define CONFIG_SYS_FPGA_MODE_TS_IRQ_CLEAR  0x1000
+#define CONFIG_SYS_FPGA_MODE_TS_CLEAR	0x2000
 
 /* FPGA Status Reg */
-#define CFG_FPGA_STATUS_DIP0	0x0001
-#define CFG_FPGA_STATUS_DIP1	0x0002
-#define CFG_FPGA_STATUS_DIP2	0x0004
-#define CFG_FPGA_STATUS_FLASH	0x0008
-#define CFG_FPGA_STATUS_TS_IRQ	0x1000
+#define CONFIG_SYS_FPGA_STATUS_DIP0	0x0001
+#define CONFIG_SYS_FPGA_STATUS_DIP1	0x0002
+#define CONFIG_SYS_FPGA_STATUS_DIP2	0x0004
+#define CONFIG_SYS_FPGA_STATUS_FLASH	0x0008
+#define CONFIG_SYS_FPGA_STATUS_TS_IRQ	0x1000
 
-#define CFG_FPGA_SPARTAN2	1		/* using Xilinx Spartan 2 now	*/
-#define CFG_FPGA_MAX_SIZE	128*1024	/* 128kByte is enough for XC2S50E*/
+#define CONFIG_SYS_FPGA_SPARTAN2	1		/* using Xilinx Spartan 2 now	*/
+#define CONFIG_SYS_FPGA_MAX_SIZE	128*1024	/* 128kByte is enough for XC2S50E*/
 
 /* FPGA program pin configuration */
-#define CFG_FPGA_PRG		0x04000000	/* FPGA program pin (ppc output) */
-#define CFG_FPGA_CLK		0x02000000	/* FPGA clk pin (ppc output)	*/
-#define CFG_FPGA_DATA		0x01000000	/* FPGA data pin (ppc output)	*/
-#define CFG_FPGA_INIT		0x00010000	/* FPGA init pin (ppc input)	*/
-#define CFG_FPGA_DONE		0x00008000	/* FPGA done pin (ppc input)	*/
+#define CONFIG_SYS_FPGA_PRG		0x04000000	/* FPGA program pin (ppc output) */
+#define CONFIG_SYS_FPGA_CLK		0x02000000	/* FPGA clk pin (ppc output)	*/
+#define CONFIG_SYS_FPGA_DATA		0x01000000	/* FPGA data pin (ppc output)	*/
+#define CONFIG_SYS_FPGA_INIT		0x00010000	/* FPGA init pin (ppc input)	*/
+#define CONFIG_SYS_FPGA_DONE		0x00008000	/* FPGA done pin (ppc input)	*/
 
 /*-----------------------------------------------------------------------
  * Definitions for initial stack pointer and data area (in data cache)
  */
 /* use on chip memory ( OCM ) for temperary stack until sdram is tested */
-#define CFG_TEMP_STACK_OCM	1
+#define CONFIG_SYS_TEMP_STACK_OCM	1
 
 /* On Chip Memory location */
-#define CFG_OCM_DATA_ADDR	0xF8000000
-#define CFG_OCM_DATA_SIZE	0x1000
-#define CFG_INIT_RAM_ADDR	CFG_OCM_DATA_ADDR /* inside of SDRAM		*/
-#define CFG_INIT_RAM_END	CFG_OCM_DATA_SIZE /* End of used area in RAM	*/
+#define CONFIG_SYS_OCM_DATA_ADDR	0xF8000000
+#define CONFIG_SYS_OCM_DATA_SIZE	0x1000
+#define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_OCM_DATA_ADDR /* inside of SDRAM		*/
+#define CONFIG_SYS_INIT_RAM_END	CONFIG_SYS_OCM_DATA_SIZE /* End of used area in RAM	*/
 
-#define CFG_GBL_DATA_SIZE      128  /* size in bytes reserved for initial data */
-#define CFG_GBL_DATA_OFFSET    (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_GBL_DATA_SIZE      128  /* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET    (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
 /*-----------------------------------------------------------------------
  * Definitions for GPIO setup (PPC405EP specific)
@@ -546,14 +545,14 @@
  * GPIO0[30]	- EMAC0 input
  * GPIO0[31]	- EMAC1 reject packet as output
  */
-#define CFG_GPIO0_OSRH		0x40000550
-#define CFG_GPIO0_OSRL		0x00000110
-#define CFG_GPIO0_ISR1H		0x00000000
-/*#define CFG_GPIO0_ISR1L	0x15555445*/
-#define CFG_GPIO0_ISR1L		0x15555444
-#define CFG_GPIO0_TSRH		0x00000000
-#define CFG_GPIO0_TSRL		0x00000000
-#define CFG_GPIO0_TCR		0xF7FF8014
+#define CONFIG_SYS_GPIO0_OSRH		0x40000550
+#define CONFIG_SYS_GPIO0_OSRL		0x00000110
+#define CONFIG_SYS_GPIO0_ISR1H		0x00000000
+/*#define CONFIG_SYS_GPIO0_ISR1L	0x15555445*/
+#define CONFIG_SYS_GPIO0_ISR1L		0x15555444
+#define CONFIG_SYS_GPIO0_TSRH		0x00000000
+#define CONFIG_SYS_GPIO0_TSRL		0x00000000
+#define CONFIG_SYS_GPIO0_TCR		0xF7FF8014
 
 /*
  * Internal Definitions
@@ -761,17 +760,17 @@
 /* Model HI */
 #define PLLMR0_DEFAULT	PPCHAMELEON_PLLMR0_333_111_37_55_55
 #define PLLMR1_DEFAULT	PPCHAMELEON_PLLMR1_333_111_37_55_55
-#define CFG_OPB_FREQ	55555555
+#define CONFIG_SYS_OPB_FREQ	55555555
 /* Model ME */
 #elif (CONFIG_PPCHAMELEON_MODULE_MODEL == CONFIG_PPCHAMELEON_MODULE_ME)
 #define PLLMR0_DEFAULT	PPCHAMELEON_PLLMR0_266_133_33_66_33
 #define PLLMR1_DEFAULT	PPCHAMELEON_PLLMR1_266_133_33_66_33
-#define CFG_OPB_FREQ	66666666
+#define CONFIG_SYS_OPB_FREQ	66666666
 #else
 /* Model BA (default) */
 #define PLLMR0_DEFAULT	PPCHAMELEON_PLLMR0_133_133_33_66_33
 #define PLLMR1_DEFAULT	PPCHAMELEON_PLLMR1_133_133_33_66_33
-#define CFG_OPB_FREQ	66666666
+#define CONFIG_SYS_OPB_FREQ	66666666
 #endif
 
 #endif /* CONFIG_NO_SERIAL_EEPROM */
diff --git a/include/configs/CCM.h b/include/configs/CCM.h
index 6194c5c6e..d1c293ff0 100644
--- a/include/configs/CCM.h
+++ b/include/configs/CCM.h
@@ -65,7 +65,7 @@
 				"bootm"
 
 #define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
-#undef	CFG_LOADS_BAUD_CHANGE	/* don't allow baudrate change	*/
+#undef	CONFIG_SYS_LOADS_BAUD_CHANGE	/* don't allow baudrate change	*/
 
 #define	CONFIG_WATCHDOG		1	/* watchdog enabled		*/
 
@@ -86,9 +86,9 @@
  * far enough from the start of the data area (as well as from the
  * stack pointer).
  * ---------------------------------------------------------------- */
-#define CFG_SPI_INIT_OFFSET		0xB00
+#define CONFIG_SYS_SPI_INIT_OFFSET		0xB00
 
-#define CFG_EEPROM_PAGE_WRITE_BITS	5	/* 32-byte page size	*/
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS	5	/* 32-byte page size	*/
 
 
 #define CONFIG_MAC_PARTITION		/* nod used yet			*/
@@ -120,46 +120,46 @@
 /*
  * Miscellaneous configurable options
  */
-#define	CFG_LONGHELP			/* undef to save memory		*/
-#define	CFG_PROMPT	"=> "		/* Monitor Command Prompt	*/
+#define	CONFIG_SYS_LONGHELP			/* undef to save memory		*/
+#define	CONFIG_SYS_PROMPT	"=> "		/* Monitor Command Prompt	*/
 #if defined(CONFIG_CMD_KGDB)
-#define	CFG_CBSIZE	1024		/* Console I/O Buffer Size	*/
+#define	CONFIG_SYS_CBSIZE	1024		/* Console I/O Buffer Size	*/
 #else
-#define	CFG_CBSIZE	256		/* Console I/O Buffer Size	*/
+#define	CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size	*/
 #endif
-#define	CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define	CFG_MAXARGS	16		/* max number of command args	*/
-#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+#define	CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define	CONFIG_SYS_MAXARGS	16		/* max number of command args	*/
+#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
 
-#define CFG_MEMTEST_START	0x00100000	/* memtest works on	*/
-#define CFG_MEMTEST_END		0x00F00000	/* 1 ... 15MB in DRAM	*/
+#define CONFIG_SYS_MEMTEST_START	0x00100000	/* memtest works on	*/
+#define CONFIG_SYS_MEMTEST_END		0x00F00000	/* 1 ... 15MB in DRAM	*/
 
-#define	CFG_LOAD_ADDR		0x00100000	/* default load address	*/
+#define	CONFIG_SYS_LOAD_ADDR		0x00100000	/* default load address	*/
 
 /* Ethernet hardware configuration done using port pins */
-#define CFG_PA_ETH_RESET	0x0200		/* PA  6	*/
-#define CFG_PA_ETH_MDDIS	0x4000		/* PA  1	*/
-#define CFG_PB_ETH_POWERDOWN	0x00000800	/* PB 20	*/
-#define CFG_PB_ETH_CFG1		0x00000400	/* PB 21	*/
-#define CFG_PB_ETH_CFG2		0x00000200	/* PB 22	*/
-#define CFG_PB_ETH_CFG3		0x00000100	/* PB 23	*/
+#define CONFIG_SYS_PA_ETH_RESET	0x0200		/* PA  6	*/
+#define CONFIG_SYS_PA_ETH_MDDIS	0x4000		/* PA  1	*/
+#define CONFIG_SYS_PB_ETH_POWERDOWN	0x00000800	/* PB 20	*/
+#define CONFIG_SYS_PB_ETH_CFG1		0x00000400	/* PB 21	*/
+#define CONFIG_SYS_PB_ETH_CFG2		0x00000200	/* PB 22	*/
+#define CONFIG_SYS_PB_ETH_CFG3		0x00000100	/* PB 23	*/
 
 /* Ethernet settings:
  * MDIO not disabled, autonegotiation, 10/100Mbps, half/full duplex
  */
-#define CFG_ETH_MDDIS_VALUE	0
-#define CFG_ETH_CFG1_VALUE	1
-#define CFG_ETH_CFG2_VALUE	1
-#define CFG_ETH_CFG3_VALUE	1
+#define CONFIG_SYS_ETH_MDDIS_VALUE	0
+#define CONFIG_SYS_ETH_CFG1_VALUE	1
+#define CONFIG_SYS_ETH_CFG2_VALUE	1
+#define CONFIG_SYS_ETH_CFG3_VALUE	1
 
 /* PUMA configuration */
-#define CFG_PC_PUMA_PROG	0x0200		/* PC  6        */
-#define CFG_PC_PUMA_DONE	0x0008		/* PC 12	*/
-#define CFG_PC_PUMA_INIT	0x0004		/* PC 13	*/
+#define CONFIG_SYS_PC_PUMA_PROG	0x0200		/* PC  6        */
+#define CONFIG_SYS_PC_PUMA_DONE	0x0008		/* PC 12	*/
+#define CONFIG_SYS_PC_PUMA_INIT	0x0004		/* PC 13	*/
 
-#define	CFG_HZ		1000		/* decrementer freq: 1 ms ticks	*/
+#define	CONFIG_SYS_HZ		1000		/* decrementer freq: 1 ms ticks	*/
 
-#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
 
 /*
  * Low Level Configuration Settings
@@ -169,81 +169,81 @@
 /*-----------------------------------------------------------------------
  * Internal Memory Mapped Register
  */
-#define CFG_IMMR		0xF0000000
+#define CONFIG_SYS_IMMR		0xF0000000
 
 /*-----------------------------------------------------------------------
  * Definitions for initial stack pointer and data area (in DPRAM)
  */
-#define CFG_INIT_RAM_ADDR	CFG_IMMR
-#define	CFG_INIT_RAM_END	0x2F00	/* End of used area in DPRAM	*/
-#define	CFG_GBL_DATA_SIZE	64  /* size in bytes reserved for initial data */
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define	CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_IMMR
+#define	CONFIG_SYS_INIT_RAM_END	0x2F00	/* End of used area in DPRAM	*/
+#define	CONFIG_SYS_GBL_DATA_SIZE	64  /* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define	CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
 /*-----------------------------------------------------------------------
  * Address accessed to reset the board - must not be mapped/assigned
  */
-#define	CFG_RESET_ADDRESS	0xFEFFFFFF
+#define	CONFIG_SYS_RESET_ADDRESS	0xFEFFFFFF
 
 /*-----------------------------------------------------------------------
  * Start addresses for the final memory configuration
  * (Set up by the startup code)
- * Please note that CFG_SDRAM_BASE _must_ start at 0
+ * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
  */
-#define	CFG_SDRAM_BASE		0x00000000
-#define CFG_FLASH_BASE		0x40000000
+#define	CONFIG_SYS_SDRAM_BASE		0x00000000
+#define CONFIG_SYS_FLASH_BASE		0x40000000
 #if defined(DEBUG)
-#define	CFG_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor	*/
+#define	CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor	*/
 #else
-#define	CFG_MONITOR_LEN		(192 << 10)	/* Reserve 192 kB for Monitor	*/
+#define	CONFIG_SYS_MONITOR_LEN		(192 << 10)	/* Reserve 192 kB for Monitor	*/
 #endif
-#define CFG_MONITOR_BASE	CFG_FLASH_BASE
-#define	CFG_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/
+#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_FLASH_BASE
+#define	CONFIG_SYS_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/
 
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define	CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux	*/
+#define	CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux	*/
 
 /*-----------------------------------------------------------------------
  * FLASH organization
  */
-#define CFG_MAX_FLASH_BANKS	2	/* max number of memory banks		*/
-#define CFG_MAX_FLASH_SECT	67	/* max number of sectors on one chip	*/
+#define CONFIG_SYS_MAX_FLASH_BANKS	2	/* max number of memory banks		*/
+#define CONFIG_SYS_MAX_FLASH_SECT	67	/* max number of sectors on one chip	*/
 
-#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
-#define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
+#define CONFIG_SYS_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
+#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
 
 #if 1
 /* Start port with environment in flash; switch to SPI EEPROM later */
-#define	CFG_ENV_IS_IN_FLASH	1
-#define	CFG_ENV_OFFSET		0x8000	/*   Offset   of Environment Sector	*/
-#define	CFG_ENV_SIZE		0x4000	/* Total Size of Environment Sector	*/
+#define	CONFIG_ENV_IS_IN_FLASH	1
+#define	CONFIG_ENV_OFFSET		0x8000	/*   Offset   of Environment Sector	*/
+#define	CONFIG_ENV_SIZE		0x4000	/* Total Size of Environment Sector	*/
 
 /* Address and size of Redundant Environment Sector	*/
-#define CFG_ENV_OFFSET_REDUND	(CFG_ENV_OFFSET+CFG_ENV_SIZE)
-#define CFG_ENV_SIZE_REDUND	(CFG_ENV_SIZE)
+#define CONFIG_ENV_OFFSET_REDUND	(CONFIG_ENV_OFFSET+CONFIG_ENV_SIZE)
+#define CONFIG_ENV_SIZE_REDUND	(CONFIG_ENV_SIZE)
 #else
 /* Final version: environment in EEPROM */
-#define CFG_ENV_IS_IN_EEPROM	1
-#define CFG_ENV_OFFSET		2048
-#define CFG_ENV_SIZE		2048
+#define CONFIG_ENV_IS_IN_EEPROM	1
+#define CONFIG_ENV_OFFSET		2048
+#define CONFIG_ENV_SIZE		2048
 #endif
 
 /*-----------------------------------------------------------------------
  * Hardware Information Block
  */
-#define CFG_HWINFO_OFFSET	0x0003FFC0	/* offset of HW Info block */
-#define CFG_HWINFO_SIZE		0x00000040	/* size   of HW Info block */
-#define CFG_HWINFO_MAGIC	0x54514D38	/* 'TQM8' */
+#define CONFIG_SYS_HWINFO_OFFSET	0x0003FFC0	/* offset of HW Info block */
+#define CONFIG_SYS_HWINFO_SIZE		0x00000040	/* size   of HW Info block */
+#define CONFIG_SYS_HWINFO_MAGIC	0x54514D38	/* 'TQM8' */
 
 /*-----------------------------------------------------------------------
  * Cache Configuration
  */
-#define CFG_CACHELINE_SIZE	16	/* For all MPC8xx CPUs			*/
-#define CFG_CACHELINE_SHIFT	4	/* log base 2 of the above value	*/
+#define CONFIG_SYS_CACHELINE_SIZE	16	/* For all MPC8xx CPUs			*/
+#define CONFIG_SYS_CACHELINE_SHIFT	4	/* log base 2 of the above value	*/
 
 /*-----------------------------------------------------------------------
  * SYPCR - System Protection Control				11-9
@@ -252,10 +252,10 @@
  * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze
  */
 #if defined(CONFIG_WATCHDOG)
-#define CFG_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
+#define CONFIG_SYS_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
 			 SYPCR_SWE  | SYPCR_SWRI| SYPCR_SWP)
 #else
-#define CFG_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
+#define CONFIG_SYS_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
 						  SYPCR_SWP)
 #endif
 
@@ -264,27 +264,27 @@
  *-----------------------------------------------------------------------
  * we must activate GPL5 in the SIUMCR for CAN
  */
-#define CFG_SIUMCR	(SIUMCR_DBGC11 | SIUMCR_DBPC00 | SIUMCR_MLRC01)
+#define CONFIG_SYS_SIUMCR	(SIUMCR_DBGC11 | SIUMCR_DBPC00 | SIUMCR_MLRC01)
 
 /*-----------------------------------------------------------------------
  * TBSCR - Time Base Status and Control				11-26
  *-----------------------------------------------------------------------
  * Clear Reference Interrupt Status, Timebase freezing enabled
  */
-#define CFG_TBSCR	(TBSCR_REFA | TBSCR_REFB | TBSCR_TBF)
+#define CONFIG_SYS_TBSCR	(TBSCR_REFA | TBSCR_REFB | TBSCR_TBF)
 
 /*-----------------------------------------------------------------------
  * RTCSC - Real-Time Clock Status and Control Register		11-27
  *-----------------------------------------------------------------------
  */
-#define CFG_RTCSC	(RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE)
+#define CONFIG_SYS_RTCSC	(RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE)
 
 /*-----------------------------------------------------------------------
  * PISCR - Periodic Interrupt Status and Control		11-31
  *-----------------------------------------------------------------------
  * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
  */
-#define CFG_PISCR	(PISCR_PS | PISCR_PITF)
+#define CONFIG_SYS_PISCR	(PISCR_PS | PISCR_PITF)
 
 /*-----------------------------------------------------------------------
  * PLPRCR - PLL, Low-Power, and Reset Control Register		15-30
@@ -295,10 +295,10 @@
  * If this is a 80 MHz CPU, set PLL multiplication factor to 5 (5*16=80)!
  */
 #ifdef	CCM_80MHz	/* for 80 MHz, we use a 16 MHz clock * 5 */
-#define CFG_PLPRCR							\
+#define CONFIG_SYS_PLPRCR							\
 		( (5-1)<<PLPRCR_MF_SHIFT | PLPRCR_TEXPS | PLPRCR_TMIST )
 #else			/* up to 50 MHz we use a 1:1 clock */
-#define CFG_PLPRCR	(PLPRCR_SPLSS | PLPRCR_TEXPS | PLPRCR_TMIST)
+#define CONFIG_SYS_PLPRCR	(PLPRCR_SPLSS | PLPRCR_TEXPS | PLPRCR_TMIST)
 #endif	/* CCM_80MHz */
 
 /*-----------------------------------------------------------------------
@@ -309,12 +309,12 @@
  */
 #define SCCR_MASK	SCCR_EBDF11
 #ifdef	CCM_80MHz	/* for 80 MHz, we use a 16 MHz clock * 5 */
-#define CFG_SCCR	(/* SCCR_TBS  | */ \
+#define CONFIG_SYS_SCCR	(/* SCCR_TBS  | */ \
 			 SCCR_COM00   | SCCR_DFSYNC00 | SCCR_DFBRG00  | \
 			 SCCR_DFNL000 | SCCR_DFNH000  | SCCR_DFLCD000 | \
 			 SCCR_DFALCD00)
 #else			/* up to 50 MHz we use a 1:1 clock */
-#define CFG_SCCR	(SCCR_TBS     | \
+#define CONFIG_SYS_SCCR	(SCCR_TBS     | \
 			 SCCR_COM00   | SCCR_DFSYNC00 | SCCR_DFBRG00  | \
 			 SCCR_DFNL000 | SCCR_DFNH000  | SCCR_DFLCD000 | \
 			 SCCR_DFALCD00)
@@ -325,14 +325,14 @@
  * Interrupt Levels
  *-----------------------------------------------------------------------
  */
-#define CFG_CPM_INTERRUPT	13	/* SIU_LEVEL6	*/
+#define CONFIG_SYS_CPM_INTERRUPT	13	/* SIU_LEVEL6	*/
 
 /*-----------------------------------------------------------------------
  *
  *-----------------------------------------------------------------------
  *
  */
-#define CFG_DER	0
+#define CONFIG_SYS_DER	0
 
 /*
  * Init Memory Controller:
@@ -347,20 +347,20 @@
  * restrict access enough to keep SRAM working (if any)
  * but not too much to meddle with FLASH accesses
  */
-#define CFG_REMAP_OR_AM		0x80000000	/* OR addr mask */
-#define CFG_PRELIM_OR_AM	0xE0000000	/* OR addr mask */
+#define CONFIG_SYS_REMAP_OR_AM		0x80000000	/* OR addr mask */
+#define CONFIG_SYS_PRELIM_OR_AM	0xE0000000	/* OR addr mask */
 
 /* FLASH timing: ACS = 11, TRLX = 0, CSNT = 1, SCY = 5, EHTR = 1	*/
-#define CFG_OR_TIMING_FLASH	(OR_CSNT_SAM  | OR_ACS_DIV2 | OR_BI | \
+#define CONFIG_SYS_OR_TIMING_FLASH	(OR_CSNT_SAM  | OR_ACS_DIV2 | OR_BI | \
 				 OR_SCY_5_CLK | OR_EHTR)
 
-#define CFG_OR0_REMAP	(CFG_REMAP_OR_AM  | CFG_OR_TIMING_FLASH)
-#define CFG_OR0_PRELIM	(CFG_PRELIM_OR_AM | CFG_OR_TIMING_FLASH)
-#define CFG_BR0_PRELIM	((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_V )
+#define CONFIG_SYS_OR0_REMAP	(CONFIG_SYS_REMAP_OR_AM  | CONFIG_SYS_OR_TIMING_FLASH)
+#define CONFIG_SYS_OR0_PRELIM	(CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_FLASH)
+#define CONFIG_SYS_BR0_PRELIM	((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_V )
 
-#define CFG_OR1_REMAP	CFG_OR0_REMAP
-#define CFG_OR1_PRELIM	CFG_OR0_PRELIM
-#define CFG_BR1_PRELIM	((FLASH_BASE1_PRELIM & BR_BA_MSK) | BR_V )
+#define CONFIG_SYS_OR1_REMAP	CONFIG_SYS_OR0_REMAP
+#define CONFIG_SYS_OR1_PRELIM	CONFIG_SYS_OR0_PRELIM
+#define CONFIG_SYS_BR1_PRELIM	((FLASH_BASE1_PRELIM & BR_BA_MSK) | BR_V )
 
 /*
  * BR2 and OR2 (SDRAM)
@@ -371,18 +371,18 @@
 #define	SDRAM_MAX_SIZE		0x04000000	/* max 64 MB per bank	*/
 
 /* SDRAM timing: Multiplexed addresses, GPL5 output to GPL5_A (don't care)	*/
-#define CFG_OR_TIMING_SDRAM	0x00000A00
+#define CONFIG_SYS_OR_TIMING_SDRAM	0x00000A00
 
-#define CFG_OR2_PRELIM	(CFG_PRELIM_OR_AM | CFG_OR_TIMING_SDRAM )
-#define CFG_BR2_PRELIM	((SDRAM_BASE2_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
+#define CONFIG_SYS_OR2_PRELIM	(CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_SDRAM )
+#define CONFIG_SYS_BR2_PRELIM	((SDRAM_BASE2_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
 
 /*
  * BR3 and OR3 (CAN Controller)
  */
-#define	CFG_CAN_BASE		0xC0000000	/* CAN mapped at 0xC0000000	*/
-#define CFG_CAN_OR_AM		0xFFFF8000	/* 32 kB address mask		*/
-#define CFG_OR3_CAN		(CFG_CAN_OR_AM | OR_G5LA | OR_BI)
-#define CFG_BR3_CAN		((CFG_CAN_BASE & BR_BA_MSK) | \
+#define	CONFIG_SYS_CAN_BASE		0xC0000000	/* CAN mapped at 0xC0000000	*/
+#define CONFIG_SYS_CAN_OR_AM		0xFFFF8000	/* 32 kB address mask		*/
+#define CONFIG_SYS_OR3_CAN		(CONFIG_SYS_CAN_OR_AM | OR_G5LA | OR_BI)
+#define CONFIG_SYS_BR3_CAN		((CONFIG_SYS_CAN_BASE & BR_BA_MSK) | \
 					BR_PS_8 | BR_MS_UPMB | BR_V )
 
 /*
@@ -409,8 +409,8 @@
 #define PUMA_CONF_BR_READ	((PUMA_CONF_BASE & BR_BA_MSK) | BR_PS_16 | BR_V)
 #define PUMA_CONF_OR_READ	(PUMA_CONF_OR_AM | PUMA_CONF_READ_TIMING)
 
-#define CFG_BR4_PRELIM		PUMA_CONF_BR_READ
-#define CFG_OR4_PRELIM		PUMA_CONF_OR_READ
+#define CONFIG_SYS_BR4_PRELIM		PUMA_CONF_BR_READ
+#define CONFIG_SYS_OR4_PRELIM		PUMA_CONF_OR_READ
 
 /*
  * BR5/OR5: PUMA: SMA Bus 8 Bit
@@ -420,8 +420,8 @@
 #define PUMA_SMA8_OR_AM		0xFFE00000	/* 2 MB */
 #define PUMA_SMA8_TIMING	(OR_BI | OR_SCY_0_CLK | OR_EHTR)
 
-#define CFG_BR5_PRELIM		((PUMA_SMA8_BASE & BR_BA_MSK) | BR_PS_8 | BR_V)
-#define CFG_OR5_PRELIM		(PUMA_SMA8_OR_AM | PUMA_SMA8_TIMING | OR_SETA)
+#define CONFIG_SYS_BR5_PRELIM		((PUMA_SMA8_BASE & BR_BA_MSK) | BR_PS_8 | BR_V)
+#define CONFIG_SYS_OR5_PRELIM		(PUMA_SMA8_OR_AM | PUMA_SMA8_TIMING | OR_SETA)
 
 /*
  * BR6/OR6: PUMA: SMA Bus 16 Bit
@@ -431,8 +431,8 @@
 #define PUMA_SMA16_OR_AM	0xFFE00000	/* 2 MB */
 #define PUMA_SMA16_TIMING	(OR_BI | OR_SCY_0_CLK | OR_EHTR)
 
-#define CFG_BR6_PRELIM		((PUMA_SMA16_BASE & BR_BA_MSK) | BR_PS_16 | BR_V)
-#define CFG_OR6_PRELIM		(PUMA_SMA16_OR_AM | PUMA_SMA16_TIMING | OR_SETA)
+#define CONFIG_SYS_BR6_PRELIM		((PUMA_SMA16_BASE & BR_BA_MSK) | BR_PS_16 | BR_V)
+#define CONFIG_SYS_OR6_PRELIM		(PUMA_SMA16_OR_AM | PUMA_SMA16_TIMING | OR_SETA)
 
 /*
  * BR7/OR7: PUMA: external Flash
@@ -442,8 +442,8 @@
 #define PUMA_FLASH_OR_AM	0xFE000000	/* 32 MB */
 #define PUMA_FLASH_TIMING	(OR_BI | OR_SCY_0_CLK | OR_EHTR)
 
-#define CFG_BR7_PRELIM		((PUMA_FLASH_BASE & BR_BA_MSK) | BR_PS_16 | BR_V)
-#define CFG_OR7_PRELIM		(PUMA_FLASH_OR_AM | PUMA_FLASH_TIMING | OR_SETA)
+#define CONFIG_SYS_BR7_PRELIM		((PUMA_FLASH_BASE & BR_BA_MSK) | BR_PS_16 | BR_V)
+#define CONFIG_SYS_OR7_PRELIM		(PUMA_FLASH_OR_AM | PUMA_FLASH_TIMING | OR_SETA)
 
 
 /*
@@ -451,26 +451,26 @@
  */
 
 /* periodic timer for refresh */
-#define CFG_MAMR_PTA	97		/* start with divider for 100 MHz	*/
+#define CONFIG_SYS_MAMR_PTA	97		/* start with divider for 100 MHz	*/
 
 /* refresh rate 15.6 us (= 64 ms / 4K = 62.4 / quad bursts) for <= 128 MBit	*/
-#define CFG_MPTPR_2BK_4K	MPTPR_PTP_DIV16		/* setting for 2 banks	*/
-#define CFG_MPTPR_1BK_4K	MPTPR_PTP_DIV32		/* setting for 1 bank	*/
+#define CONFIG_SYS_MPTPR_2BK_4K	MPTPR_PTP_DIV16		/* setting for 2 banks	*/
+#define CONFIG_SYS_MPTPR_1BK_4K	MPTPR_PTP_DIV32		/* setting for 1 bank	*/
 
 /* refresh rate 7.8 us (= 64 ms / 8K = 31.2 / quad bursts) for 256 MBit		*/
-#define CFG_MPTPR_2BK_8K	MPTPR_PTP_DIV8		/* setting for 2 banks	*/
-#define CFG_MPTPR_1BK_8K	MPTPR_PTP_DIV16		/* setting for 1 bank	*/
+#define CONFIG_SYS_MPTPR_2BK_8K	MPTPR_PTP_DIV8		/* setting for 2 banks	*/
+#define CONFIG_SYS_MPTPR_1BK_8K	MPTPR_PTP_DIV16		/* setting for 1 bank	*/
 
 /*
  * MAMR settings for SDRAM
  */
 
 /* 8 column SDRAM */
-#define CFG_MAMR_8COL	((CFG_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
+#define CONFIG_SYS_MAMR_8COL	((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
 			 MAMR_AMA_TYPE_0 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A11 |	\
 			 MAMR_RLFA_1X	 | MAMR_WLFA_1X	   | MAMR_TLFA_4X)
 /* 9 column SDRAM */
-#define CFG_MAMR_9COL	((CFG_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
+#define CONFIG_SYS_MAMR_9COL	((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
 			 MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 |	\
 			 MAMR_RLFA_1X	 | MAMR_WLFA_1X	   | MAMR_TLFA_4X)
 
diff --git a/include/configs/CMS700.h b/include/configs/CMS700.h
index 285cd5c0e..d0e246409 100644
--- a/include/configs/CMS700.h
+++ b/include/configs/CMS700.h
@@ -50,8 +50,9 @@
 
 #define CONFIG_PREBOOT                  /* enable preboot variable      */
 
-#define CFG_LOADS_BAUD_CHANGE	1	/* allow baudrate change	*/
+#define CONFIG_SYS_LOADS_BAUD_CHANGE	1	/* allow baudrate change	*/
 
+#define CONFIG_PPC4xx_EMAC
 #define CONFIG_NET_MULTI	1
 #undef  CONFIG_HAS_ETH1
 
@@ -99,74 +100,74 @@
 /*
  * Miscellaneous configurable options
  */
-#define CFG_LONGHELP			/* undef to save memory		*/
-#define CFG_PROMPT	"=> "		/* Monitor Command Prompt	*/
+#define CONFIG_SYS_LONGHELP			/* undef to save memory		*/
+#define CONFIG_SYS_PROMPT	"=> "		/* Monitor Command Prompt	*/
 
-#undef	CFG_HUSH_PARSER			/* use "hush" command parser	*/
-#ifdef	CFG_HUSH_PARSER
-#define CFG_PROMPT_HUSH_PS2	"> "
+#undef	CONFIG_SYS_HUSH_PARSER			/* use "hush" command parser	*/
+#ifdef	CONFIG_SYS_HUSH_PARSER
+#define CONFIG_SYS_PROMPT_HUSH_PS2	"> "
 #endif
 
 #if defined(CONFIG_CMD_KGDB)
-#define CFG_CBSIZE	1024		/* Console I/O Buffer Size	*/
+#define CONFIG_SYS_CBSIZE	1024		/* Console I/O Buffer Size	*/
 #else
-#define CFG_CBSIZE	256		/* Console I/O Buffer Size	*/
+#define CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size	*/
 #endif
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define CFG_MAXARGS	16		/* max number of command args	*/
-#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS	16		/* max number of command args	*/
+#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
 
-#define CFG_DEVICE_NULLDEV	1	/* include nulldev device	*/
+#define CONFIG_SYS_DEVICE_NULLDEV	1	/* include nulldev device	*/
 
-#define CFG_CONSOLE_INFO_QUIET	1	/* don't print console @ startup*/
+#define CONFIG_SYS_CONSOLE_INFO_QUIET	1	/* don't print console @ startup*/
 
-#define CFG_MEMTEST_START	0x0400000	/* memtest works on	*/
-#define CFG_MEMTEST_END		0x0C00000	/* 4 ... 12 MB in DRAM	*/
+#define CONFIG_SYS_MEMTEST_START	0x0400000	/* memtest works on	*/
+#define CONFIG_SYS_MEMTEST_END		0x0C00000	/* 4 ... 12 MB in DRAM	*/
 
-#undef	CFG_EXT_SERIAL_CLOCK	       /* no external serial clock used */
-#define CFG_IGNORE_405_UART_ERRATA_59	/* ignore ppc405gp errata #59	*/
-#define CFG_BASE_BAUD	    691200
+#undef	CONFIG_SYS_EXT_SERIAL_CLOCK	       /* no external serial clock used */
+#define CONFIG_SYS_IGNORE_405_UART_ERRATA_59	/* ignore ppc405gp errata #59	*/
+#define CONFIG_SYS_BASE_BAUD	    691200
 #define	CONFIG_UART1_CONSOLE		/* define for uart1 as console	*/
 
 /* The following table includes the supported baudrates */
-#define CFG_BAUDRATE_TABLE	\
+#define CONFIG_SYS_BAUDRATE_TABLE	\
 	{ 300, 600, 1200, 2400, 4800, 9600, 19200, 38400,     \
 	 57600, 115200, 230400, 460800, 921600 }
 
-#define CFG_LOAD_ADDR	0x100000	/* default load address */
-#define CFG_EXTBDINFO	1		/* To use extended board_into (bd_t) */
+#define CONFIG_SYS_LOAD_ADDR	0x100000	/* default load address */
+#define CONFIG_SYS_EXTBDINFO	1		/* To use extended board_into (bd_t) */
 
-#define CFG_HZ		1000		/* decrementer freq: 1 ms ticks */
+#define CONFIG_SYS_HZ		1000		/* decrementer freq: 1 ms ticks */
 
 #define CONFIG_ZERO_BOOTDELAY_CHECK	/* check for keypress on bootdelay==0 */
 
 #define CONFIG_VERSION_VARIABLE 1	/* include version env variable */
 
-#define CFG_RX_ETH_BUFFER	16	/* use 16 rx buffer on 405 emac */
+#define CONFIG_SYS_RX_ETH_BUFFER	16	/* use 16 rx buffer on 405 emac */
 
 /*-----------------------------------------------------------------------
  * RTC stuff
  *-----------------------------------------------------------------------
  */
 #define CONFIG_RTC_DS1337
-#define CFG_I2C_RTC_ADDR	0x68
+#define CONFIG_SYS_I2C_RTC_ADDR	0x68
 
 /*-----------------------------------------------------------------------
  * NAND-FLASH stuff
  *-----------------------------------------------------------------------
  */
-#define CFG_NAND_BASE_LIST	{ CFG_NAND_BASE }
+#define CONFIG_SYS_NAND_BASE_LIST	{ CONFIG_SYS_NAND_BASE }
 #define NAND_MAX_CHIPS          1
-#define CFG_MAX_NAND_DEVICE	1         /* Max number of NAND devices */
+#define CONFIG_SYS_MAX_NAND_DEVICE	1         /* Max number of NAND devices */
 #define NAND_BIG_DELAY_US	25
 
-#define CFG_NAND_CE             (0x80000000 >> 1)   /* our CE is GPIO1  */
-#define CFG_NAND_RDY            (0x80000000 >> 4)   /* our RDY is GPIO4 */
-#define CFG_NAND_CLE            (0x80000000 >> 2)   /* our CLE is GPIO2 */
-#define CFG_NAND_ALE            (0x80000000 >> 3)   /* our ALE is GPIO3 */
+#define CONFIG_SYS_NAND_CE             (0x80000000 >> 1)   /* our CE is GPIO1  */
+#define CONFIG_SYS_NAND_RDY            (0x80000000 >> 4)   /* our RDY is GPIO4 */
+#define CONFIG_SYS_NAND_CLE            (0x80000000 >> 2)   /* our CLE is GPIO2 */
+#define CONFIG_SYS_NAND_ALE            (0x80000000 >> 3)   /* our ALE is GPIO3 */
 
-#define CFG_NAND_SKIP_BAD_DOT_I 1       /* ".i" read skips bad blocks   */
-#define CFG_NAND_QUIET          1
+#define CONFIG_SYS_NAND_SKIP_BAD_DOT_I 1       /* ".i" read skips bad blocks   */
+#define CONFIG_SYS_NAND_QUIET          1
 
 /*-----------------------------------------------------------------------
  * PCI stuff
@@ -183,141 +184,140 @@
 
 #undef	CONFIG_PCI_SCAN_SHOW		/* print pci devices @ startup	*/
 
-#define CFG_PCI_SUBSYS_VENDORID 0x12FE	/* PCI Vendor ID: esd gmbh	*/
-#define CFG_PCI_SUBSYS_DEVICEID 0x0405	/* PCI Device ID: CPCI-405	*/
-#define CFG_PCI_CLASSCODE	0x0b20	/* PCI Class Code: Processor/PPC*/
-#define CFG_PCI_PTM1LA	0x00000000	/* point to sdram		*/
-#define CFG_PCI_PTM1MS	0xfc000001	/* 64MB, enable hard-wired to 1 */
-#define CFG_PCI_PTM1PCI 0x00000000	/* Host: use this pci address	*/
-#define CFG_PCI_PTM2LA	0xffc00000	/* point to flash		*/
-#define CFG_PCI_PTM2MS	0xffc00001	/* 4MB, enable			*/
-#define CFG_PCI_PTM2PCI 0x04000000	/* Host: use this pci address	*/
+#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x12FE	/* PCI Vendor ID: esd gmbh	*/
+#define CONFIG_SYS_PCI_SUBSYS_DEVICEID 0x0405	/* PCI Device ID: CPCI-405	*/
+#define CONFIG_SYS_PCI_CLASSCODE	0x0b20	/* PCI Class Code: Processor/PPC*/
+#define CONFIG_SYS_PCI_PTM1LA	0x00000000	/* point to sdram		*/
+#define CONFIG_SYS_PCI_PTM1MS	0xfc000001	/* 64MB, enable hard-wired to 1 */
+#define CONFIG_SYS_PCI_PTM1PCI 0x00000000	/* Host: use this pci address	*/
+#define CONFIG_SYS_PCI_PTM2LA	0xffc00000	/* point to flash		*/
+#define CONFIG_SYS_PCI_PTM2MS	0xffc00001	/* 4MB, enable			*/
+#define CONFIG_SYS_PCI_PTM2PCI 0x04000000	/* Host: use this pci address	*/
 
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
+#define CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
 /*-----------------------------------------------------------------------
  * FLASH organization
  */
 #define FLASH_BASE0_PRELIM	0xFFC00000	/* FLASH bank #0	*/
 
-#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
-#define CFG_MAX_FLASH_SECT	256	/* max number of sectors on one chip	*/
+#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
+#define CONFIG_SYS_MAX_FLASH_SECT	256	/* max number of sectors on one chip	*/
 
-#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
-#define CFG_FLASH_WRITE_TOUT	1000	/* Timeout for Flash Write (in ms)	*/
+#define CONFIG_SYS_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
+#define CONFIG_SYS_FLASH_WRITE_TOUT	1000	/* Timeout for Flash Write (in ms)	*/
 
-#define CFG_FLASH_WORD_SIZE	unsigned short	/* flash word size (width)	*/
-#define CFG_FLASH_ADDR0		0x5555	/* 1st address for flash config cycles	*/
-#define CFG_FLASH_ADDR1		0x2AAA	/* 2nd address for flash config cycles	*/
+#define CONFIG_SYS_FLASH_WORD_SIZE	unsigned short	/* flash word size (width)	*/
+#define CONFIG_SYS_FLASH_ADDR0		0x5555	/* 1st address for flash config cycles	*/
+#define CONFIG_SYS_FLASH_ADDR1		0x2AAA	/* 2nd address for flash config cycles	*/
 /*
  * The following defines are added for buggy IOP480 byte interface.
  * All other boards should use the standard values (CPCI405 etc.)
  */
-#define CFG_FLASH_READ0		0x0000	/* 0 is standard			*/
-#define CFG_FLASH_READ1		0x0001	/* 1 is standard			*/
-#define CFG_FLASH_READ2		0x0002	/* 2 is standard			*/
+#define CONFIG_SYS_FLASH_READ0		0x0000	/* 0 is standard			*/
+#define CONFIG_SYS_FLASH_READ1		0x0001	/* 1 is standard			*/
+#define CONFIG_SYS_FLASH_READ2		0x0002	/* 2 is standard			*/
 
-#define CFG_FLASH_EMPTY_INFO		/* print 'E' for empty sector on flinfo */
+#define CONFIG_SYS_FLASH_EMPTY_INFO		/* print 'E' for empty sector on flinfo */
 
 #if 0 /* test-only */
-#define CFG_JFFS2_FIRST_BANK	0	    /* use for JFFS2 */
-#define CFG_JFFS2_NUM_BANKS	1	    /* ! second bank contains U-Boot */
+#define CONFIG_SYS_JFFS2_FIRST_BANK	0	    /* use for JFFS2 */
+#define CONFIG_SYS_JFFS2_NUM_BANKS	1	    /* ! second bank contains U-Boot */
 #endif
 
 /*-----------------------------------------------------------------------
  * Start addresses for the final memory configuration
  * (Set up by the startup code)
- * Please note that CFG_SDRAM_BASE _must_ start at 0
+ * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
  */
-#define CFG_SDRAM_BASE		0x00000000
-#define CFG_FLASH_BASE		0xFFFC0000
-#define CFG_MONITOR_BASE	TEXT_BASE
-#define CFG_MONITOR_LEN		(256 * 1024)	/* Reserve 256 kB for Monitor	*/
-#define CFG_MALLOC_LEN		(256 * 1024)	/* Reserve 256 kB for malloc()	*/
-
-#if (CFG_MONITOR_BASE < FLASH_BASE0_PRELIM)
-# define CFG_RAMBOOT		1
+#define CONFIG_SYS_SDRAM_BASE		0x00000000
+#define CONFIG_SYS_FLASH_BASE		0xFFFC0000
+#define CONFIG_SYS_MONITOR_BASE	TEXT_BASE
+#define CONFIG_SYS_MONITOR_LEN		(256 * 1024)	/* Reserve 256 kB for Monitor	*/
+#define CONFIG_SYS_MALLOC_LEN		(256 * 1024)	/* Reserve 256 kB for malloc()	*/
+
+#if (CONFIG_SYS_MONITOR_BASE < FLASH_BASE0_PRELIM)
+# define CONFIG_SYS_RAMBOOT		1
 #else
-# undef CFG_RAMBOOT
+# undef CONFIG_SYS_RAMBOOT
 #endif
 
 /*-----------------------------------------------------------------------
  * Environment Variable setup
  */
-#define CFG_ENV_IS_IN_EEPROM	1	/* use EEPROM for environment vars */
-#define CFG_ENV_OFFSET		0x100	/* environment starts at the beginning of the EEPROM */
-#define CFG_ENV_SIZE		0x700	/* 2048 bytes may be used for env vars*/
+#define CONFIG_ENV_IS_IN_EEPROM	1	/* use EEPROM for environment vars */
+#define CONFIG_ENV_OFFSET		0x100	/* environment starts at the beginning of the EEPROM */
+#define CONFIG_ENV_SIZE		0x700	/* 2048 bytes may be used for env vars*/
 				   /* total size of a CAT24WC16 is 2048 bytes */
 
 /*-----------------------------------------------------------------------
  * I2C EEPROM (CAT24WC16) for environment
  */
 #define CONFIG_HARD_I2C			/* I2c with hardware support */
-#define CFG_I2C_SPEED		100000	/* I2C speed and slave address */
-#define CFG_I2C_SLAVE		0x7F
+#define CONFIG_SYS_I2C_SPEED		100000	/* I2C speed and slave address */
+#define CONFIG_SYS_I2C_SLAVE		0x7F
 
-#define CFG_I2C_EEPROM_ADDR	0x50	/* EEPROM CAT28WC08		*/
-#define CFG_I2C_EEPROM_ADDR_LEN 1	/* Bytes of address		*/
+#define CONFIG_SYS_I2C_EEPROM_ADDR	0x50	/* EEPROM CAT28WC08		*/
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1	/* Bytes of address		*/
 /* mask of address bits that overflow into the "EEPROM chip address"	*/
-#define CFG_I2C_EEPROM_ADDR_OVERFLOW	0x07
-#define CFG_EEPROM_PAGE_WRITE_BITS 4	/* The Catalyst CAT24WC08 has	*/
+#define CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW	0x07
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 4	/* The Catalyst CAT24WC08 has	*/
 					/* 16 byte page write mode using*/
 					/* last 4 bits of the address	*/
-#define CFG_EEPROM_PAGE_WRITE_DELAY_MS	10   /* and takes up to 10 msec */
-#define CFG_EEPROM_PAGE_WRITE_ENABLE
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	10   /* and takes up to 10 msec */
 
-#define CFG_EEPROM_WREN         1
+#define CONFIG_SYS_EEPROM_WREN         1
 
 /*-----------------------------------------------------------------------
  * External Bus Controller (EBC) Setup
  */
-#define CFG_PLD_BASE            0xf0000000
-#define CFG_NAND_BASE	        0xF4000000  /* NAND FLASH Base Address		*/
+#define CONFIG_SYS_PLD_BASE            0xf0000000
+#define CONFIG_SYS_NAND_BASE	        0xF4000000  /* NAND FLASH Base Address		*/
 
 /* Memory Bank 0 (Flash Bank 0, NOR-FLASH) initialization			*/
-#define CFG_EBC_PB0AP		0x92015480
-#define CFG_EBC_PB0CR		0xFFC5A000  /* BAS=0xFFC,BS=4MB,BU=R/W,BW=16bit */
+#define CONFIG_SYS_EBC_PB0AP		0x92015480
+#define CONFIG_SYS_EBC_PB0CR		0xFFC5A000  /* BAS=0xFFC,BS=4MB,BU=R/W,BW=16bit */
 
 /* Memory Bank 1 (Flash Bank 1, NAND-FLASH) initialization			*/
-#define CFG_EBC_PB1AP		0x92015480
-#define CFG_EBC_PB1CR		0xF4018000  /* BAS=0xF40,BS=1MB,BU=R/W,BW=8bit	*/
+#define CONFIG_SYS_EBC_PB1AP		0x92015480
+#define CONFIG_SYS_EBC_PB1CR		0xF4018000  /* BAS=0xF40,BS=1MB,BU=R/W,BW=8bit	*/
 
 /* Memory Bank 2 (8 Bit Peripheral: CAN, UART, RTC) initialization		*/
-#define CFG_EBC_PB2AP		0x010053C0  /* BWT=2,WBN=1,WBF=1,TH=1,RE=1,SOR=1,BEM=1 */
-#define CFG_EBC_PB2CR		0xF0018000  /* BAS=0xF00,BS=1MB,BU=R/W,BW=8bit	*/
+#define CONFIG_SYS_EBC_PB2AP		0x010053C0  /* BWT=2,WBN=1,WBF=1,TH=1,RE=1,SOR=1,BEM=1 */
+#define CONFIG_SYS_EBC_PB2CR		0xF0018000  /* BAS=0xF00,BS=1MB,BU=R/W,BW=8bit	*/
 
 /*-----------------------------------------------------------------------
  * FPGA stuff
  */
-#define CFG_FPGA_XC95XL		1	    /* using Xilinx XC95XL CPLD	     */
-#define CFG_FPGA_MAX_SIZE	32*1024	    /* 32kByte is enough for CPLD    */
+#define CONFIG_SYS_FPGA_XC95XL		1	    /* using Xilinx XC95XL CPLD	     */
+#define CONFIG_SYS_FPGA_MAX_SIZE	32*1024	    /* 32kByte is enough for CPLD    */
 
 /* FPGA program pin configuration */
-#define CFG_FPGA_PRG		0x04000000  /* JTAG TMS pin (ppc output)     */
-#define CFG_FPGA_CLK		0x02000000  /* JTAG TCK pin (ppc output)     */
-#define CFG_FPGA_DATA		0x01000000  /* JTAG TDO->TDI data pin (ppc output) */
-#define CFG_FPGA_INIT		0x00010000  /* unused (ppc input)	     */
-#define CFG_FPGA_DONE		0x00008000  /* JTAG TDI->TDO pin (ppc input) */
+#define CONFIG_SYS_FPGA_PRG		0x04000000  /* JTAG TMS pin (ppc output)     */
+#define CONFIG_SYS_FPGA_CLK		0x02000000  /* JTAG TCK pin (ppc output)     */
+#define CONFIG_SYS_FPGA_DATA		0x01000000  /* JTAG TDO->TDI data pin (ppc output) */
+#define CONFIG_SYS_FPGA_INIT		0x00010000  /* unused (ppc input)	     */
+#define CONFIG_SYS_FPGA_DONE		0x00008000  /* JTAG TDI->TDO pin (ppc input) */
 
 /*-----------------------------------------------------------------------
  * Definitions for initial stack pointer and data area (in data cache)
  */
 /* use on chip memory ( OCM ) for temperary stack until sdram is tested */
-#define CFG_TEMP_STACK_OCM	  1
+#define CONFIG_SYS_TEMP_STACK_OCM	  1
 
 /* On Chip Memory location */
-#define CFG_OCM_DATA_ADDR	0xF8000000
-#define CFG_OCM_DATA_SIZE	0x1000
-#define CFG_INIT_RAM_ADDR	CFG_OCM_DATA_ADDR /* inside of SDRAM		*/
-#define CFG_INIT_RAM_END	CFG_OCM_DATA_SIZE /* End of used area in RAM	*/
+#define CONFIG_SYS_OCM_DATA_ADDR	0xF8000000
+#define CONFIG_SYS_OCM_DATA_SIZE	0x1000
+#define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_OCM_DATA_ADDR /* inside of SDRAM		*/
+#define CONFIG_SYS_INIT_RAM_END	CONFIG_SYS_OCM_DATA_SIZE /* End of used area in RAM	*/
 
-#define CFG_GBL_DATA_SIZE      128  /* size in bytes reserved for initial data */
-#define CFG_GBL_DATA_OFFSET    (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_GBL_DATA_SIZE      128  /* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET    (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
 /*-----------------------------------------------------------------------
  * Definitions for GPIO setup (PPC405EP specific)
@@ -335,16 +335,16 @@
 /* GPIO Output:		OSR=00, ISR=00, TSR=00, TCR=1 */
 /* Alt. Funtion Input:	OSR=00, ISR=01, TSR=00, TCR=0 */
 /* Alt. Funtion Output: OSR=01, ISR=00, TSR=00, TCR=1 */
-#define CFG_GPIO0_OSRH		0x40000500  /*	0 ... 15 */
-#define CFG_GPIO0_OSRL		0x00000110  /* 16 ... 31 */
-#define CFG_GPIO0_ISR1H		0x00000000  /*	0 ... 15 */
-#define CFG_GPIO0_ISR1L		0x14000045  /* 16 ... 31 */
-#define CFG_GPIO0_TSRH		0x00000000  /*	0 ... 15 */
-#define CFG_GPIO0_TSRL		0x00000000  /* 16 ... 31 */
-#define CFG_GPIO0_TCR		0xF7FE0014  /*	0 ... 31 */
-
-#define CFG_EEPROM_WP		(0x80000000 >> 8)    /* GPIO8 */
-#define CFG_PLD_RESET		(0x80000000 >> 12)   /* GPIO12 */
+#define CONFIG_SYS_GPIO0_OSRH		0x40000500  /*	0 ... 15 */
+#define CONFIG_SYS_GPIO0_OSRL		0x00000110  /* 16 ... 31 */
+#define CONFIG_SYS_GPIO0_ISR1H		0x00000000  /*	0 ... 15 */
+#define CONFIG_SYS_GPIO0_ISR1L		0x14000045  /* 16 ... 31 */
+#define CONFIG_SYS_GPIO0_TSRH		0x00000000  /*	0 ... 15 */
+#define CONFIG_SYS_GPIO0_TSRL		0x00000000  /* 16 ... 31 */
+#define CONFIG_SYS_GPIO0_TCR		0xF7FE0014  /*	0 ... 31 */
+
+#define CONFIG_SYS_EEPROM_WP		(0x80000000 >> 8)    /* GPIO8 */
+#define CONFIG_SYS_PLD_RESET		(0x80000000 >> 12)   /* GPIO12 */
 
 /*
  * Internal Definitions
diff --git a/include/configs/CPC45.h b/include/configs/CPC45.h
index 11107d499..91d262a22 100644
--- a/include/configs/CPC45.h
+++ b/include/configs/CPC45.h
@@ -48,7 +48,7 @@
 
 #define CONFIG_CONS_INDEX	1
 #define CONFIG_BAUDRATE		9600
-#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
 
 #define CONFIG_PREBOOT	"echo;echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;echo"
 
@@ -89,60 +89,60 @@
 /*
  * Miscellaneous configurable options
  */
-#define CFG_LONGHELP			/* undef to save memory		*/
-#define CFG_PROMPT	"=> "		/* Monitor Command Prompt	*/
-#define CFG_CBSIZE	256		/* Console I/O Buffer Size	*/
+#define CONFIG_SYS_LONGHELP			/* undef to save memory		*/
+#define CONFIG_SYS_PROMPT	"=> "		/* Monitor Command Prompt	*/
+#define CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size	*/
 
 #if 1
-#define CFG_HUSH_PARSER		1	/* use "hush" command parser	*/
+#define CONFIG_SYS_HUSH_PARSER		1	/* use "hush" command parser	*/
 #endif
-#ifdef	CFG_HUSH_PARSER
-#define CFG_PROMPT_HUSH_PS2	"> "
+#ifdef	CONFIG_SYS_HUSH_PARSER
+#define CONFIG_SYS_PROMPT_HUSH_PS2	"> "
 #endif
 
 /* Print Buffer Size
  */
-#define CFG_PBSIZE	(CFG_CBSIZE + sizeof(CFG_PROMPT) + 16)
+#define CONFIG_SYS_PBSIZE	(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
 
-#define CFG_MAXARGS	16		/* max number of command args	*/
-#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size	*/
-#define CFG_LOAD_ADDR	0x00100000	/* Default load address		*/
+#define CONFIG_SYS_MAXARGS	16		/* max number of command args	*/
+#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
+#define CONFIG_SYS_LOAD_ADDR	0x00100000	/* Default load address		*/
 
 /*-----------------------------------------------------------------------
  * Start addresses for the final memory configuration
  * (Set up by the startup code)
- * Please note that CFG_SDRAM_BASE _must_ start at 0
+ * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
  */
 
-#define CFG_SDRAM_BASE		0x00000000
+#define CONFIG_SYS_SDRAM_BASE		0x00000000
 
 #if defined(CONFIG_BOOT_ROM)
-#define CFG_FLASH_BASE		0xFF000000
+#define CONFIG_SYS_FLASH_BASE		0xFF000000
 #else
-#define CFG_FLASH_BASE		0xFF800000
+#define CONFIG_SYS_FLASH_BASE		0xFF800000
 #endif
 
-#define CFG_RESET_ADDRESS	0xFFF00100
+#define CONFIG_SYS_RESET_ADDRESS	0xFFF00100
 
-#define CFG_EUMB_ADDR		0xFCE00000
+#define CONFIG_SYS_EUMB_ADDR		0xFCE00000
 
-#define CFG_MONITOR_BASE	TEXT_BASE
+#define CONFIG_SYS_MONITOR_BASE	TEXT_BASE
 
-#define CFG_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor	*/
-#define CFG_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/
+#define CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor	*/
+#define CONFIG_SYS_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/
 
-#define CFG_MEMTEST_START	0x00004000	/* memtest works on		*/
-#define CFG_MEMTEST_END		0x02000000	/* 0 ... 32 MB in DRAM		*/
+#define CONFIG_SYS_MEMTEST_START	0x00004000	/* memtest works on		*/
+#define CONFIG_SYS_MEMTEST_END		0x02000000	/* 0 ... 32 MB in DRAM		*/
 
 /* Maximum amount of RAM.
  */
-#define CFG_MAX_RAM_SIZE	0x10000000
+#define CONFIG_SYS_MAX_RAM_SIZE	0x10000000
 
 
-#if CFG_MONITOR_BASE >= CFG_FLASH_BASE
-#undef CFG_RAMBOOT
+#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE
+#undef CONFIG_SYS_RAMBOOT
 #else
-#define CFG_RAMBOOT
+#define CONFIG_SYS_RAMBOOT
 #endif
 
 
@@ -152,48 +152,48 @@
 
 /* Size in bytes reserved for initial data
  */
-#define CFG_GBL_DATA_SIZE	128
+#define CONFIG_SYS_GBL_DATA_SIZE	128
 
-#define CFG_INIT_RAM_ADDR	0x40000000
-#define CFG_INIT_RAM_END	0x1000
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_RAM_ADDR	0x40000000
+#define CONFIG_SYS_INIT_RAM_END	0x1000
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
 
 /*
  * NS16550 Configuration
  */
-#define CFG_NS16550
-#define CFG_NS16550_SERIAL
+#define CONFIG_SYS_NS16550
+#define CONFIG_SYS_NS16550_SERIAL
 
-#define CFG_NS16550_REG_SIZE	1
+#define CONFIG_SYS_NS16550_REG_SIZE	1
 
-#define CFG_NS16550_CLK		get_bus_freq(0)
+#define CONFIG_SYS_NS16550_CLK		get_bus_freq(0)
 
-#define CFG_NS16550_COM1	(CFG_EUMB_ADDR + 0x4500)
-#define CFG_NS16550_COM2	(CFG_EUMB_ADDR + 0x4600)
-#define DUART_DCR		(CFG_EUMB_ADDR + 0x4511)
+#define CONFIG_SYS_NS16550_COM1	(CONFIG_SYS_EUMB_ADDR + 0x4500)
+#define CONFIG_SYS_NS16550_COM2	(CONFIG_SYS_EUMB_ADDR + 0x4600)
+#define DUART_DCR		(CONFIG_SYS_EUMB_ADDR + 0x4511)
 
 /*
  * I2C configuration
  */
 #define CONFIG_HARD_I2C		1	/* I2C with hardware support */
 
-#define CFG_I2C_SPEED		100000 /* 100 kHz */
-#define CFG_I2C_SLAVE		0x7F
+#define CONFIG_SYS_I2C_SPEED		100000 /* 100 kHz */
+#define CONFIG_SYS_I2C_SLAVE		0x7F
 
 /*
  * RTC configuration
  */
 #define CONFIG_RTC_PCF8563
-#define CFG_I2C_RTC_ADDR	0x51
+#define CONFIG_SYS_I2C_RTC_ADDR	0x51
 
 /*
  * EEPROM configuration
  */
-#define CFG_I2C_EEPROM_ADDR		0x58
-#define CFG_I2C_EEPROM_ADDR_LEN		1
-#define CFG_EEPROM_PAGE_WRITE_BITS	4
-#define CFG_EEPROM_PAGE_WRITE_DELAY_MS	10
-#define CFG_I2C_EEPROM_ADDR_OVERFLOW	0x07
+#define CONFIG_SYS_I2C_EEPROM_ADDR		0x58
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN		1
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS	4
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	10
+#define CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW	0x07
 
 /*
  * Low Level Configuration Settings
@@ -203,48 +203,48 @@
  */
 
 #define CONFIG_SYS_CLK_FREQ	33000000
-#define CFG_HZ			1000
+#define CONFIG_SYS_HZ			1000
 
 
 /* Bit-field values for MCCR1.
  */
-#define CFG_ROMNAL		0
-#define CFG_ROMFAL		8
-
-#define CFG_BANK0_ROW		0	/* SDRAM bank 7-0 row address */
-#define CFG_BANK1_ROW		0
-#define CFG_BANK2_ROW		0
-#define CFG_BANK3_ROW		0
-#define CFG_BANK4_ROW		0
-#define CFG_BANK5_ROW		0
-#define CFG_BANK6_ROW		0
-#define CFG_BANK7_ROW		0
+#define CONFIG_SYS_ROMNAL		0
+#define CONFIG_SYS_ROMFAL		8
+
+#define CONFIG_SYS_BANK0_ROW		0	/* SDRAM bank 7-0 row address */
+#define CONFIG_SYS_BANK1_ROW		0
+#define CONFIG_SYS_BANK2_ROW		0
+#define CONFIG_SYS_BANK3_ROW		0
+#define CONFIG_SYS_BANK4_ROW		0
+#define CONFIG_SYS_BANK5_ROW		0
+#define CONFIG_SYS_BANK6_ROW		0
+#define CONFIG_SYS_BANK7_ROW		0
 
 /* Bit-field values for MCCR2.
  */
 
-#define CFG_REFINT		0x2ec
+#define CONFIG_SYS_REFINT		0x2ec
 
 /* Burst To Precharge. Bits of this value go to MCCR3 and MCCR4.
  */
-#define CFG_BSTOPRE		160
+#define CONFIG_SYS_BSTOPRE		160
 
 /* Bit-field values for MCCR3.
  */
-#define CFG_REFREC		2	/* Refresh to activate interval		*/
-#define CFG_RDLAT		0	/* Data latancy from read command	*/
+#define CONFIG_SYS_REFREC		2	/* Refresh to activate interval		*/
+#define CONFIG_SYS_RDLAT		0	/* Data latancy from read command	*/
 
 /* Bit-field values for MCCR4.
  */
-#define CFG_PRETOACT		2	/* Precharge to activate interval	*/
-#define CFG_ACTTOPRE		5	/* Activate to Precharge interval	*/
-#define CFG_SDMODE_CAS_LAT	2	/* SDMODE CAS latancy			*/
-#define CFG_SDMODE_WRAP		0	/* SDMODE wrap type			*/
-#define CFG_SDMODE_BURSTLEN	2	/* SDMODE Burst length			*/
-#define CFG_ACTORW		2
-#define CFG_REGISTERD_TYPE_BUFFER 1
-#define CFG_EXTROM		0
-#define CFG_REGDIMM		0
+#define CONFIG_SYS_PRETOACT		2	/* Precharge to activate interval	*/
+#define CONFIG_SYS_ACTTOPRE		5	/* Activate to Precharge interval	*/
+#define CONFIG_SYS_SDMODE_CAS_LAT	2	/* SDMODE CAS latancy			*/
+#define CONFIG_SYS_SDMODE_WRAP		0	/* SDMODE wrap type			*/
+#define CONFIG_SYS_SDMODE_BURSTLEN	2	/* SDMODE Burst length			*/
+#define CONFIG_SYS_ACTORW		2
+#define CONFIG_SYS_REGISTERD_TYPE_BUFFER 1
+#define CONFIG_SYS_EXTROM		0
+#define CONFIG_SYS_REGDIMM		0
 
 /* Memory bank settings.
  * Only bits 20-29 are actually used from these vales to set the
@@ -253,89 +253,89 @@
  * address. Refer to the MPC8240 book.
  */
 
-#define CFG_BANK0_START		0x00000000
-#define CFG_BANK0_END		(CFG_MAX_RAM_SIZE - 1)
-#define CFG_BANK0_ENABLE	1
-#define CFG_BANK1_START		0x3ff00000
-#define CFG_BANK1_END		0x3fffffff
-#define CFG_BANK1_ENABLE	0
-#define CFG_BANK2_START		0x3ff00000
-#define CFG_BANK2_END		0x3fffffff
-#define CFG_BANK2_ENABLE	0
-#define CFG_BANK3_START		0x3ff00000
-#define CFG_BANK3_END		0x3fffffff
-#define CFG_BANK3_ENABLE	0
-#define CFG_BANK4_START		0x3ff00000
-#define CFG_BANK4_END		0x3fffffff
-#define CFG_BANK4_ENABLE	0
-#define CFG_BANK5_START		0x3ff00000
-#define CFG_BANK5_END		0x3fffffff
-#define CFG_BANK5_ENABLE	0
-#define CFG_BANK6_START		0x3ff00000
-#define CFG_BANK6_END		0x3fffffff
-#define CFG_BANK6_ENABLE	0
-#define CFG_BANK7_START		0x3ff00000
-#define CFG_BANK7_END		0x3fffffff
-#define CFG_BANK7_ENABLE	0
-
-#define CFG_ODCR		0xff
-#define CFG_PGMAX		0x32	/* how long the 8240 retains the	*/
+#define CONFIG_SYS_BANK0_START		0x00000000
+#define CONFIG_SYS_BANK0_END		(CONFIG_SYS_MAX_RAM_SIZE - 1)
+#define CONFIG_SYS_BANK0_ENABLE	1
+#define CONFIG_SYS_BANK1_START		0x3ff00000
+#define CONFIG_SYS_BANK1_END		0x3fffffff
+#define CONFIG_SYS_BANK1_ENABLE	0
+#define CONFIG_SYS_BANK2_START		0x3ff00000
+#define CONFIG_SYS_BANK2_END		0x3fffffff
+#define CONFIG_SYS_BANK2_ENABLE	0
+#define CONFIG_SYS_BANK3_START		0x3ff00000
+#define CONFIG_SYS_BANK3_END		0x3fffffff
+#define CONFIG_SYS_BANK3_ENABLE	0
+#define CONFIG_SYS_BANK4_START		0x3ff00000
+#define CONFIG_SYS_BANK4_END		0x3fffffff
+#define CONFIG_SYS_BANK4_ENABLE	0
+#define CONFIG_SYS_BANK5_START		0x3ff00000
+#define CONFIG_SYS_BANK5_END		0x3fffffff
+#define CONFIG_SYS_BANK5_ENABLE	0
+#define CONFIG_SYS_BANK6_START		0x3ff00000
+#define CONFIG_SYS_BANK6_END		0x3fffffff
+#define CONFIG_SYS_BANK6_ENABLE	0
+#define CONFIG_SYS_BANK7_START		0x3ff00000
+#define CONFIG_SYS_BANK7_END		0x3fffffff
+#define CONFIG_SYS_BANK7_ENABLE	0
+
+#define CONFIG_SYS_ODCR		0xff
+#define CONFIG_SYS_PGMAX		0x32	/* how long the 8240 retains the	*/
 					/* currently accessed page in memory	*/
 					/* see 8240 book for details		*/
 
-#define CFG_IBAT0L  (CFG_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
-#define CFG_IBAT0U  (CFG_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CONFIG_SYS_IBAT0L  (CONFIG_SYS_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
+#define CONFIG_SYS_IBAT0U  (CONFIG_SYS_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
 
-#define CFG_IBAT1L  (CFG_INIT_RAM_ADDR | BATL_PP_10 | BATL_MEMCOHERENCE)
-#define CFG_IBAT1U  (CFG_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP)
+#define CONFIG_SYS_IBAT1L  (CONFIG_SYS_INIT_RAM_ADDR | BATL_PP_10 | BATL_MEMCOHERENCE)
+#define CONFIG_SYS_IBAT1U  (CONFIG_SYS_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP)
 
-#define CFG_IBAT2L  (0x80000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
-#define CFG_IBAT2U  (0x80000000 | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CONFIG_SYS_IBAT2L  (0x80000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
+#define CONFIG_SYS_IBAT2U  (0x80000000 | BATU_BL_256M | BATU_VS | BATU_VP)
 
-#define CFG_IBAT3L  (0xFC000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
-#define CFG_IBAT3U  (0xFC000000 | BATU_BL_64M | BATU_VS | BATU_VP)
+#define CONFIG_SYS_IBAT3L  (0xFC000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
+#define CONFIG_SYS_IBAT3U  (0xFC000000 | BATU_BL_64M | BATU_VS | BATU_VP)
 
-#define CFG_DBAT0L  CFG_IBAT0L
-#define CFG_DBAT0U  CFG_IBAT0U
-#define CFG_DBAT1L  CFG_IBAT1L
-#define CFG_DBAT1U  CFG_IBAT1U
-#define CFG_DBAT2L  CFG_IBAT2L
-#define CFG_DBAT2U  CFG_IBAT2U
-#define CFG_DBAT3L  CFG_IBAT3L
-#define CFG_DBAT3U  CFG_IBAT3U
+#define CONFIG_SYS_DBAT0L  CONFIG_SYS_IBAT0L
+#define CONFIG_SYS_DBAT0U  CONFIG_SYS_IBAT0U
+#define CONFIG_SYS_DBAT1L  CONFIG_SYS_IBAT1L
+#define CONFIG_SYS_DBAT1U  CONFIG_SYS_IBAT1U
+#define CONFIG_SYS_DBAT2L  CONFIG_SYS_IBAT2L
+#define CONFIG_SYS_DBAT2U  CONFIG_SYS_IBAT2U
+#define CONFIG_SYS_DBAT3L  CONFIG_SYS_IBAT3L
+#define CONFIG_SYS_DBAT3U  CONFIG_SYS_IBAT3U
 
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
+#define CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
 
 /*-----------------------------------------------------------------------
  * FLASH organization
  */
-#define CFG_MAX_FLASH_BANKS	1	/* Max number of flash banks		*/
-#define CFG_MAX_FLASH_SECT	39	/* Max number of sectors in one bank	*/
+#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* Max number of flash banks		*/
+#define CONFIG_SYS_MAX_FLASH_SECT	39	/* Max number of sectors in one bank	*/
 #define INTEL_ID_28F160F3T	0x88F388F3	/*  16M = 1M x 16 top boot sector	*/
-#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
-#define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
+#define CONFIG_SYS_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
+#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
 
 	/* Warining: environment is not EMBEDDED in the ppcboot code.
 	 * It's stored in flash separately.
 	 */
-#define CFG_ENV_IS_IN_FLASH	    1
+#define CONFIG_ENV_IS_IN_FLASH	    1
 
-#define CFG_ENV_ADDR		(CFG_FLASH_BASE + 0x7F8000)
-#define CFG_ENV_SIZE		0x4000	/* Size of the Environment		*/
-#define CFG_ENV_OFFSET		0	/* starting right at the beginning	*/
-#define CFG_ENV_SECT_SIZE	0x8000 /* Size of the Environment Sector	*/
+#define CONFIG_ENV_ADDR		(CONFIG_SYS_FLASH_BASE + 0x7F8000)
+#define CONFIG_ENV_SIZE		0x4000	/* Size of the Environment		*/
+#define CONFIG_ENV_OFFSET		0	/* starting right at the beginning	*/
+#define CONFIG_ENV_SECT_SIZE	0x8000 /* Size of the Environment Sector	*/
 
 /*-----------------------------------------------------------------------
  * Cache Configuration
  */
-#define CFG_CACHELINE_SIZE	32
+#define CONFIG_SYS_CACHELINE_SIZE	32
 #if defined(CONFIG_CMD_KGDB)
-#  define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value	*/
+#  define CONFIG_SYS_CACHELINE_SHIFT	5	/* log base 2 of the above value	*/
 #endif
 
 /*
@@ -472,7 +472,7 @@
 #define CONFIG_NET_MULTI		/* Multi ethernet cards support		*/
 
 #define CONFIG_EEPRO100
-#define CFG_RX_ETH_BUFFER	8	/* use 8 rx buffer on eepro100	*/
+#define CONFIG_SYS_RX_ETH_BUFFER	8	/* use 8 rx buffer on eepro100	*/
 
 #define PCI_ENET0_IOADDR	0x82000000
 #define PCI_ENET0_MEMADDR	0x82000000
@@ -486,8 +486,8 @@
 
 #define CONFIG_I82365
 
-#define CFG_PCMCIA_MEM_ADDR	PCMCIA_MEM_BASE
-#define CFG_PCMCIA_MEM_SIZE	0x1000
+#define CONFIG_SYS_PCMCIA_MEM_ADDR	PCMCIA_MEM_BASE
+#define CONFIG_SYS_PCMCIA_MEM_SIZE	0x1000
 
 #define CONFIG_PCMCIA_SLOT_A
 
@@ -502,20 +502,20 @@
 #undef	CONFIG_IDE_RESET		/* reset for IDE not supported	*/
 #define	CONFIG_IDE_LED			/* LED   for IDE is  supported	*/
 
-#define CFG_IDE_MAXBUS		1	/* max. 1 IDE bus		*/
-#define CFG_IDE_MAXDEVICE	1	/* max. 1 drive per IDE bus	*/
+#define CONFIG_SYS_IDE_MAXBUS		1	/* max. 1 IDE bus		*/
+#define CONFIG_SYS_IDE_MAXDEVICE	1	/* max. 1 drive per IDE bus	*/
 
-#define CFG_ATA_IDE0_OFFSET	0x0000
+#define CONFIG_SYS_ATA_IDE0_OFFSET	0x0000
 
-#define CFG_ATA_BASE_ADDR	CFG_PCMCIA_MEM_ADDR
+#define CONFIG_SYS_ATA_BASE_ADDR	CONFIG_SYS_PCMCIA_MEM_ADDR
 
-#define CFG_ATA_DATA_OFFSET	CFG_PCMCIA_MEM_SIZE
+#define CONFIG_SYS_ATA_DATA_OFFSET	CONFIG_SYS_PCMCIA_MEM_SIZE
 
 /* Offset for normal register accesses	*/
-#define CFG_ATA_REG_OFFSET	(CFG_PCMCIA_MEM_SIZE + 0x320)
+#define CONFIG_SYS_ATA_REG_OFFSET	(CONFIG_SYS_PCMCIA_MEM_SIZE + 0x320)
 
 /* Offset for alternate registers	*/
-#define CFG_ATA_ALT_OFFSET	(CFG_PCMCIA_MEM_SIZE + 0x400)
+#define CONFIG_SYS_ATA_ALT_OFFSET	(CONFIG_SYS_PCMCIA_MEM_SIZE + 0x400)
 
 #define CONFIG_DOS_PARTITION
 
diff --git a/include/configs/CPCI2DP.h b/include/configs/CPCI2DP.h
index 58900c309..328773430 100644
--- a/include/configs/CPCI2DP.h
+++ b/include/configs/CPCI2DP.h
@@ -49,7 +49,7 @@
 #define CONFIG_PREBOOT                  /* enable preboot variable      */
 
 #define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
-#define CFG_LOADS_BAUD_CHANGE	1	/* allow baudrate change	*/
+#define CONFIG_SYS_LOADS_BAUD_CHANGE	1	/* allow baudrate change	*/
 
 #define CONFIG_MII		1	/* MII PHY management		*/
 #define CONFIG_PHY_ADDR		0	/* PHY address			*/
@@ -85,46 +85,46 @@
 /*
  * Miscellaneous configurable options
  */
-#define CFG_LONGHELP			/* undef to save memory		*/
-#define CFG_PROMPT	"=> "		/* Monitor Command Prompt	*/
+#define CONFIG_SYS_LONGHELP			/* undef to save memory		*/
+#define CONFIG_SYS_PROMPT	"=> "		/* Monitor Command Prompt	*/
 
-#undef	CFG_HUSH_PARSER			/* use "hush" command parser	*/
-#ifdef	CFG_HUSH_PARSER
-#define CFG_PROMPT_HUSH_PS2	"> "
+#undef	CONFIG_SYS_HUSH_PARSER			/* use "hush" command parser	*/
+#ifdef	CONFIG_SYS_HUSH_PARSER
+#define CONFIG_SYS_PROMPT_HUSH_PS2	"> "
 #endif
 
 #if defined(CONFIG_CMD_KGDB)
-#define CFG_CBSIZE	1024		/* Console I/O Buffer Size	*/
+#define CONFIG_SYS_CBSIZE	1024		/* Console I/O Buffer Size	*/
 #else
-#define CFG_CBSIZE	256		/* Console I/O Buffer Size	*/
+#define CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size	*/
 #endif
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define CFG_MAXARGS	16		/* max number of command args	*/
-#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS	16		/* max number of command args	*/
+#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
 
-#define CFG_DEVICE_NULLDEV	1	/* include nulldev device	*/
+#define CONFIG_SYS_DEVICE_NULLDEV	1	/* include nulldev device	*/
 
-#define CFG_CONSOLE_INFO_QUIET	1	/* don't print console @ startup*/
+#define CONFIG_SYS_CONSOLE_INFO_QUIET	1	/* don't print console @ startup*/
 
 #define CONFIG_AUTO_COMPLETE	1       /* add autocompletion support   */
 
-#define CFG_MEMTEST_START	0x0400000	/* memtest works on	*/
-#define CFG_MEMTEST_END		0x0C00000	/* 4 ... 12 MB in DRAM	*/
+#define CONFIG_SYS_MEMTEST_START	0x0400000	/* memtest works on	*/
+#define CONFIG_SYS_MEMTEST_END		0x0C00000	/* 4 ... 12 MB in DRAM	*/
 
-#undef	CFG_EXT_SERIAL_CLOCK	       /* no external serial clock used */
-#define CFG_IGNORE_405_UART_ERRATA_59	/* ignore ppc405gp errata #59	*/
-#define CFG_BASE_BAUD	    691200
+#undef	CONFIG_SYS_EXT_SERIAL_CLOCK	       /* no external serial clock used */
+#define CONFIG_SYS_IGNORE_405_UART_ERRATA_59	/* ignore ppc405gp errata #59	*/
+#define CONFIG_SYS_BASE_BAUD	    691200
 #define CONFIG_UART1_CONSOLE            /* define for uart1 as console  */
 
 /* The following table includes the supported baudrates */
-#define CFG_BAUDRATE_TABLE	\
+#define CONFIG_SYS_BAUDRATE_TABLE	\
 	{ 300, 600, 1200, 2400, 4800, 9600, 19200, 38400,     \
 	 57600, 115200, 230400, 460800, 921600 }
 
-#define CFG_LOAD_ADDR	0x100000	/* default load address */
-#define CFG_EXTBDINFO	1		/* To use extended board_into (bd_t) */
+#define CONFIG_SYS_LOAD_ADDR	0x100000	/* default load address */
+#define CONFIG_SYS_EXTBDINFO	1		/* To use extended board_into (bd_t) */
 
-#define CFG_HZ		1000		/* decrementer freq: 1 ms ticks */
+#define CONFIG_SYS_HZ		1000		/* decrementer freq: 1 ms ticks */
 
 #define CONFIG_LOOPW            1       /* enable loopw command         */
 
@@ -132,7 +132,7 @@
 
 #define CONFIG_VERSION_VARIABLE 1	/* include version env variable */
 
-#define CFG_RX_ETH_BUFFER	16	/* use 16 rx buffer on 405 emac */
+#define CONFIG_SYS_RX_ETH_BUFFER	16	/* use 16 rx buffer on 405 emac */
 
 /*-----------------------------------------------------------------------
  * PCI stuff
@@ -153,75 +153,74 @@
 
 #define CONFIG_PCI_BOOTDELAY    0       /* enable pci bootdelay variable*/
 
-#define CFG_PCI_SUBSYS_VENDORID 0x12FE  /* PCI Vendor ID: esd gmbh      */
-#define CFG_PCI_SUBSYS_DEVICEID 0x040b  /* PCI Device ID: CPCI-2DP      */
-#define CFG_PCI_CLASSCODE       0x0280	/* PCI Class Code: Network/Other*/
+#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x12FE  /* PCI Vendor ID: esd gmbh      */
+#define CONFIG_SYS_PCI_SUBSYS_DEVICEID 0x040b  /* PCI Device ID: CPCI-2DP      */
+#define CONFIG_SYS_PCI_CLASSCODE       0x0280	/* PCI Class Code: Network/Other*/
 
-#define CFG_PCI_PTM1LA  (bd->bi_memstart) /* point to sdram               */
-#define CFG_PCI_PTM1MS  (~(bd->bi_memsize - 1) | 1) /* memsize, enable hard-wired to 1 */
-#define CFG_PCI_PTM1PCI 0x00000000      /* Host: use this pci address   */
-#define CFG_PCI_PTM2LA	0xef000000	/* point to internal regs + PB0/1 */
-#define CFG_PCI_PTM2MS  0xff000001      /* 16MB, enable                  */
-#define CFG_PCI_PTM2PCI 0x00000000      /* Host: use this pci address   */
+#define CONFIG_SYS_PCI_PTM1LA  (bd->bi_memstart) /* point to sdram               */
+#define CONFIG_SYS_PCI_PTM1MS  (~(bd->bi_memsize - 1) | 1) /* memsize, enable hard-wired to 1 */
+#define CONFIG_SYS_PCI_PTM1PCI 0x00000000      /* Host: use this pci address   */
+#define CONFIG_SYS_PCI_PTM2LA	0xef000000	/* point to internal regs + PB0/1 */
+#define CONFIG_SYS_PCI_PTM2MS  0xff000001      /* 16MB, enable                  */
+#define CONFIG_SYS_PCI_PTM2PCI 0x00000000      /* Host: use this pci address   */
 
 /*-----------------------------------------------------------------------
  * Start addresses for the final memory configuration
  * (Set up by the startup code)
- * Please note that CFG_SDRAM_BASE _must_ start at 0
+ * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
  */
-#define CFG_SDRAM_BASE		0x00000000
-#define CFG_FLASH_BASE		0xFFFC0000
-#define CFG_MONITOR_BASE	CFG_FLASH_BASE
-#define CFG_MONITOR_LEN		(256 * 1024)	/* Reserve 256 kB for Monitor	*/
-#define CFG_MALLOC_LEN		(128 * 1024)	/* Reserve 128 kB for malloc()	*/
+#define CONFIG_SYS_SDRAM_BASE		0x00000000
+#define CONFIG_SYS_FLASH_BASE		0xFFFC0000
+#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_FLASH_BASE
+#define CONFIG_SYS_MONITOR_LEN		(256 * 1024)	/* Reserve 256 kB for Monitor	*/
+#define CONFIG_SYS_MALLOC_LEN		(128 * 1024)	/* Reserve 128 kB for malloc()	*/
 
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
+#define CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
 /*-----------------------------------------------------------------------
  * FLASH organization
  */
-#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
-#define CFG_MAX_FLASH_SECT	256	/* max number of sectors on one chip	*/
+#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
+#define CONFIG_SYS_MAX_FLASH_SECT	256	/* max number of sectors on one chip	*/
 
-#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
-#define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
+#define CONFIG_SYS_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
+#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
 
-#define CFG_FLASH_WORD_SIZE	unsigned short	/* flash word size (width)	*/
-#define CFG_FLASH_ADDR0		0x5555	/* 1st address for flash config cycles	*/
-#define CFG_FLASH_ADDR1		0x2AAA	/* 2nd address for flash config cycles	*/
+#define CONFIG_SYS_FLASH_WORD_SIZE	unsigned short	/* flash word size (width)	*/
+#define CONFIG_SYS_FLASH_ADDR0		0x5555	/* 1st address for flash config cycles	*/
+#define CONFIG_SYS_FLASH_ADDR1		0x2AAA	/* 2nd address for flash config cycles	*/
 
-#define CFG_FLASH_READ0		0x0000	/* 0 is standard			*/
-#define CFG_FLASH_READ1		0x0001	/* 1 is standard			*/
-#define CFG_FLASH_READ2		0x0002	/* 2 is standard			*/
+#define CONFIG_SYS_FLASH_READ0		0x0000	/* 0 is standard			*/
+#define CONFIG_SYS_FLASH_READ1		0x0001	/* 1 is standard			*/
+#define CONFIG_SYS_FLASH_READ2		0x0002	/* 2 is standard			*/
 
-#define CFG_FLASH_EMPTY_INFO		/* print 'E' for empty sector on flinfo */
+#define CONFIG_SYS_FLASH_EMPTY_INFO		/* print 'E' for empty sector on flinfo */
 
-#define CFG_ENV_IS_IN_EEPROM	1	/* use EEPROM for environment vars */
-#define CFG_ENV_OFFSET		0x000	/* environment starts at the beginning of the EEPROM */
-#define CFG_ENV_SIZE		0x400	/* 1024 bytes may be used for env vars */
+#define CONFIG_ENV_IS_IN_EEPROM	1	/* use EEPROM for environment vars */
+#define CONFIG_ENV_OFFSET		0x000	/* environment starts at the beginning of the EEPROM */
+#define CONFIG_ENV_SIZE		0x400	/* 1024 bytes may be used for env vars */
 
 /*-----------------------------------------------------------------------
  * I2C EEPROM (CAT24WC16) for environment
  */
 #define CONFIG_HARD_I2C			/* I2c with hardware support */
-#define CFG_I2C_SPEED		400000	/* I2C speed and slave address */
-#define CFG_I2C_SLAVE		0x7F
+#define CONFIG_SYS_I2C_SPEED		400000	/* I2C speed and slave address */
+#define CONFIG_SYS_I2C_SLAVE		0x7F
 
-#define CFG_I2C_EEPROM_ADDR	0x50	/* EEPROM CAT28WC08		*/
-#define CFG_I2C_EEPROM_ADDR_LEN 1	/* Bytes of address		*/
+#define CONFIG_SYS_I2C_EEPROM_ADDR	0x50	/* EEPROM CAT28WC08		*/
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1	/* Bytes of address		*/
 /* mask of address bits that overflow into the "EEPROM chip address"	*/
-#define CFG_I2C_EEPROM_ADDR_OVERFLOW	0x07
-#define CFG_EEPROM_PAGE_WRITE_BITS 4	/* The Catalyst CAT24WC08 has	*/
+#define CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW	0x07
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 4	/* The Catalyst CAT24WC08 has	*/
 					/* 16 byte page write mode using*/
 					/* last 4 bits of the address	*/
-#define CFG_EEPROM_PAGE_WRITE_DELAY_MS	10   /* and takes up to 10 msec */
-#define CFG_EEPROM_PAGE_WRITE_ENABLE
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	10   /* and takes up to 10 msec */
 
-#define CFG_EEPROM_WREN         1
+#define CONFIG_SYS_EEPROM_WREN         1
 
 /*
  * Init Memory Controller:
@@ -236,35 +235,35 @@
  */
 
 /* Memory Bank 0 (Flash Bank 0) initialization					*/
-#define CFG_EBC_PB0AP		0x92015480
-#define CFG_EBC_PB0CR		0xFFC5A000  /* BAS=0xFFC,BS=4MB,BU=R/W,BW=16bit */
+#define CONFIG_SYS_EBC_PB0AP		0x92015480
+#define CONFIG_SYS_EBC_PB0CR		0xFFC5A000  /* BAS=0xFFC,BS=4MB,BU=R/W,BW=16bit */
 
 /* Memory Bank 2 (PB0) initialization					*/
-#define CFG_EBC_PB2AP		0x03004580  /* TWT=6,WBN=1,TH=2,RE=1,SOR=1 */
-#define CFG_EBC_PB2CR		0xEF018000  /* BAS=0xF00,BS=1MB,BU=R/W,BW=8bit	*/
+#define CONFIG_SYS_EBC_PB2AP		0x03004580  /* TWT=6,WBN=1,TH=2,RE=1,SOR=1 */
+#define CONFIG_SYS_EBC_PB2CR		0xEF018000  /* BAS=0xF00,BS=1MB,BU=R/W,BW=8bit	*/
 
 /* Memory Bank 3 (PB1) initialization				*/
-#define CFG_EBC_PB3AP		0x03004580  /* TWT=6,WBN=1,TH=2,RE=1,SOR=1 */
-#define CFG_EBC_PB3CR		0xEF118000  /* BAS=0xF01,BS=1MB,BU=R/W,BW=8bit */
+#define CONFIG_SYS_EBC_PB3AP		0x03004580  /* TWT=6,WBN=1,TH=2,RE=1,SOR=1 */
+#define CONFIG_SYS_EBC_PB3CR		0xEF118000  /* BAS=0xF01,BS=1MB,BU=R/W,BW=8bit */
 
 /*-----------------------------------------------------------------------
  * Definitions for initial stack pointer and data area (in data cache)
  */
-#define CFG_INIT_DCACHE_CS	7	/* use cs # 7 for data cache memory    */
+#define CONFIG_SYS_INIT_DCACHE_CS	7	/* use cs # 7 for data cache memory    */
 
-#define CFG_INIT_RAM_ADDR	0x40000000  /* use data cache		       */
-#define CFG_INIT_RAM_END	0x2000	/* End of used area in RAM	       */
-#define CFG_GBL_DATA_SIZE       128  /* size in bytes reserved for initial data */
-#define CFG_GBL_DATA_OFFSET     (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_INIT_RAM_ADDR	0x40000000  /* use data cache		       */
+#define CONFIG_SYS_INIT_RAM_END	0x2000	/* End of used area in RAM	       */
+#define CONFIG_SYS_GBL_DATA_SIZE       128  /* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET     (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
 /*-----------------------------------------------------------------------
  * GPIO definitions
  */
-#define CFG_EEPROM_WP		(0x80000000 >> 13)   /* GPIO13 */
-#define CFG_SELF_RST		(0x80000000 >> 14)   /* GPIO14 */
-#define CFG_PB_LED		(0x80000000 >> 16)   /* GPIO16 */
-#define CFG_INTA_FAKE		(0x80000000 >> 23)   /* GPIO23 */
+#define CONFIG_SYS_EEPROM_WP		(0x80000000 >> 13)   /* GPIO13 */
+#define CONFIG_SYS_SELF_RST		(0x80000000 >> 14)   /* GPIO14 */
+#define CONFIG_SYS_PB_LED		(0x80000000 >> 16)   /* GPIO16 */
+#define CONFIG_SYS_INTA_FAKE		(0x80000000 >> 23)   /* GPIO23 */
 
 /*
  * Internal Definitions
diff --git a/include/configs/CPCI405.h b/include/configs/CPCI405.h
index bd43e1dc9..89ba139af 100644
--- a/include/configs/CPCI405.h
+++ b/include/configs/CPCI405.h
@@ -50,8 +50,9 @@
 #define CONFIG_PREBOOT                  /* enable preboot variable      */
 
 #define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
-#define CFG_LOADS_BAUD_CHANGE	1	/* allow baudrate change	*/
+#define CONFIG_SYS_LOADS_BAUD_CHANGE	1	/* allow baudrate change	*/
 
+#define CONFIG_PPC4xx_EMAC
 #define CONFIG_MII		1	/* MII PHY management		*/
 #define CONFIG_PHY_ADDR		0	/* PHY address			*/
 #define CONFIG_LXT971_NO_SLEEP  1       /* disable sleep mode in LXT971 */
@@ -99,43 +100,43 @@
 /*
  * Miscellaneous configurable options
  */
-#define CFG_LONGHELP			/* undef to save memory		*/
-#define CFG_PROMPT	"=> "		/* Monitor Command Prompt	*/
+#define CONFIG_SYS_LONGHELP			/* undef to save memory		*/
+#define CONFIG_SYS_PROMPT	"=> "		/* Monitor Command Prompt	*/
 
-#undef	CFG_HUSH_PARSER			/* use "hush" command parser	*/
-#ifdef	CFG_HUSH_PARSER
-#define CFG_PROMPT_HUSH_PS2	"> "
+#undef	CONFIG_SYS_HUSH_PARSER			/* use "hush" command parser	*/
+#ifdef	CONFIG_SYS_HUSH_PARSER
+#define CONFIG_SYS_PROMPT_HUSH_PS2	"> "
 #endif
 
 #if defined(CONFIG_CMD_KGDB)
-#define CFG_CBSIZE	1024		/* Console I/O Buffer Size	*/
+#define CONFIG_SYS_CBSIZE	1024		/* Console I/O Buffer Size	*/
 #else
-#define CFG_CBSIZE	256		/* Console I/O Buffer Size	*/
+#define CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size	*/
 #endif
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define CFG_MAXARGS	16		/* max number of command args	*/
-#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS	16		/* max number of command args	*/
+#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
 
-#define CFG_DEVICE_NULLDEV	1	/* include nulldev device	*/
+#define CONFIG_SYS_DEVICE_NULLDEV	1	/* include nulldev device	*/
 
-#define CFG_CONSOLE_INFO_QUIET	1	/* don't print console @ startup*/
+#define CONFIG_SYS_CONSOLE_INFO_QUIET	1	/* don't print console @ startup*/
 
-#define CFG_MEMTEST_START	0x0400000	/* memtest works on	*/
-#define CFG_MEMTEST_END		0x0C00000	/* 4 ... 12 MB in DRAM	*/
+#define CONFIG_SYS_MEMTEST_START	0x0400000	/* memtest works on	*/
+#define CONFIG_SYS_MEMTEST_END		0x0C00000	/* 4 ... 12 MB in DRAM	*/
 
-#undef	CFG_EXT_SERIAL_CLOCK	       /* no external serial clock used */
-#define CFG_IGNORE_405_UART_ERRATA_59	/* ignore ppc405gp errata #59	*/
-#define CFG_BASE_BAUD	    691200
+#undef	CONFIG_SYS_EXT_SERIAL_CLOCK	       /* no external serial clock used */
+#define CONFIG_SYS_IGNORE_405_UART_ERRATA_59	/* ignore ppc405gp errata #59	*/
+#define CONFIG_SYS_BASE_BAUD	    691200
 
 /* The following table includes the supported baudrates */
-#define CFG_BAUDRATE_TABLE	\
+#define CONFIG_SYS_BAUDRATE_TABLE	\
 	{ 300, 600, 1200, 2400, 4800, 9600, 19200, 38400,     \
 	 57600, 115200, 230400, 460800, 921600 }
 
-#define CFG_LOAD_ADDR	0x100000	/* default load address */
-#define CFG_EXTBDINFO	1		/* To use extended board_into (bd_t) */
+#define CONFIG_SYS_LOAD_ADDR	0x100000	/* default load address */
+#define CONFIG_SYS_EXTBDINFO	1		/* To use extended board_into (bd_t) */
 
-#define CFG_HZ		1000		/* decrementer freq: 1 ms ticks */
+#define CONFIG_SYS_HZ		1000		/* decrementer freq: 1 ms ticks */
 
 #define CONFIG_LOOPW            1       /* enable loopw command         */
 
@@ -160,16 +161,16 @@
 
 #define CONFIG_PCI_BOOTDELAY    0       /* enable pci bootdelay variable*/
 
-#define CFG_PCI_SUBSYS_VENDORID 0x12FE  /* PCI Vendor ID: esd gmbh      */
-#define CFG_PCI_SUBSYS_DEVICEID 0x0405  /* PCI Device ID: CPCI-405      */
-#define CFG_PCI_SUBSYS_DEVICEID2 0x0406 /* PCI Device ID: CPCI-405-A    */
-#define CFG_PCI_CLASSCODE       0x0b20  /* PCI Class Code: Processor/PPC*/
-#define CFG_PCI_PTM1LA  (bd->bi_memstart) /* point to sdram               */
-#define CFG_PCI_PTM1MS  (~(bd->bi_memsize - 1) | 1) /* memsize, enable hard-wired to 1 */
-#define CFG_PCI_PTM1PCI 0x00000000      /* Host: use this pci address   */
-#define CFG_PCI_PTM2LA  0xffc00000      /* point to flash               */
-#define CFG_PCI_PTM2MS  0xffc00001      /* 4MB, enable                  */
-#define CFG_PCI_PTM2PCI 0x04000000      /* Host: use this pci address   */
+#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x12FE  /* PCI Vendor ID: esd gmbh      */
+#define CONFIG_SYS_PCI_SUBSYS_DEVICEID 0x0405  /* PCI Device ID: CPCI-405      */
+#define CONFIG_SYS_PCI_SUBSYS_DEVICEID2 0x0406 /* PCI Device ID: CPCI-405-A    */
+#define CONFIG_SYS_PCI_CLASSCODE       0x0b20  /* PCI Class Code: Processor/PPC*/
+#define CONFIG_SYS_PCI_PTM1LA  (bd->bi_memstart) /* point to sdram               */
+#define CONFIG_SYS_PCI_PTM1MS  (~(bd->bi_memsize - 1) | 1) /* memsize, enable hard-wired to 1 */
+#define CONFIG_SYS_PCI_PTM1PCI 0x00000000      /* Host: use this pci address   */
+#define CONFIG_SYS_PCI_PTM2LA  0xffc00000      /* point to flash               */
+#define CONFIG_SYS_PCI_PTM2MS  0xffc00001      /* 4MB, enable                  */
+#define CONFIG_SYS_PCI_PTM2PCI 0x04000000      /* Host: use this pci address   */
 
 /*-----------------------------------------------------------------------
  * IDE/ATA stuff
@@ -179,73 +180,73 @@
 #undef	CONFIG_IDE_LED			/* no led for ide supported	*/
 #undef	CONFIG_IDE_RESET		/* no reset for ide supported	*/
 
-#define CFG_IDE_MAXBUS		1		/* max. 1 IDE busses	*/
-#define CFG_IDE_MAXDEVICE	(CFG_IDE_MAXBUS*1) /* max. 1 drives per IDE bus */
+#define CONFIG_SYS_IDE_MAXBUS		1		/* max. 1 IDE busses	*/
+#define CONFIG_SYS_IDE_MAXDEVICE	(CONFIG_SYS_IDE_MAXBUS*1) /* max. 1 drives per IDE bus */
 
-#define CFG_ATA_BASE_ADDR	0xF0100000
-#define CFG_ATA_IDE0_OFFSET	0x0000
+#define CONFIG_SYS_ATA_BASE_ADDR	0xF0100000
+#define CONFIG_SYS_ATA_IDE0_OFFSET	0x0000
 
-#define CFG_ATA_DATA_OFFSET	0x0000	/* Offset for data I/O			*/
-#define CFG_ATA_REG_OFFSET	0x0000	/* Offset for normal register accesses	*/
-#define CFG_ATA_ALT_OFFSET	0x0000	/* Offset for alternate registers	*/
+#define CONFIG_SYS_ATA_DATA_OFFSET	0x0000	/* Offset for data I/O			*/
+#define CONFIG_SYS_ATA_REG_OFFSET	0x0000	/* Offset for normal register accesses	*/
+#define CONFIG_SYS_ATA_ALT_OFFSET	0x0000	/* Offset for alternate registers	*/
 
 /*-----------------------------------------------------------------------
  * Start addresses for the final memory configuration
  * (Set up by the startup code)
- * Please note that CFG_SDRAM_BASE _must_ start at 0
+ * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
  */
-#define CFG_SDRAM_BASE		0x00000000
-#define CFG_FLASH_BASE		0xFFFD0000
-#define CFG_MONITOR_BASE	CFG_FLASH_BASE
-#define CFG_MONITOR_LEN		(192 * 1024)	/* Reserve 196 kB for Monitor	*/
-#define CFG_MALLOC_LEN		(128 * 1024)	/* Reserve 128 kB for malloc()	*/
+#define CONFIG_SYS_SDRAM_BASE		0x00000000
+#define CONFIG_SYS_FLASH_BASE		TEXT_BASE
+#define CONFIG_SYS_MONITOR_BASE		TEXT_BASE
+#define CONFIG_SYS_MONITOR_LEN		(~(TEXT_BASE) + 1)
+#define CONFIG_SYS_MALLOC_LEN		(128 * 1024)	/* Reserve 128 kB for malloc()	*/
 
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
+#define CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
 /*-----------------------------------------------------------------------
  * FLASH organization
  */
-#define CFG_MAX_FLASH_BANKS	2	/* max number of memory banks		*/
-#define CFG_MAX_FLASH_SECT	256	/* max number of sectors on one chip	*/
+#define CONFIG_SYS_MAX_FLASH_BANKS	2	/* max number of memory banks		*/
+#define CONFIG_SYS_MAX_FLASH_SECT	256	/* max number of sectors on one chip	*/
 
-#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
-#define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
+#define CONFIG_SYS_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
+#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
 
-#define CFG_FLASH_WORD_SIZE	unsigned short	/* flash word size (width)	*/
-#define CFG_FLASH_ADDR0		0x5555	/* 1st address for flash config cycles	*/
-#define CFG_FLASH_ADDR1		0x2AAA	/* 2nd address for flash config cycles	*/
+#define CONFIG_SYS_FLASH_WORD_SIZE	unsigned short	/* flash word size (width)	*/
+#define CONFIG_SYS_FLASH_ADDR0		0x5555	/* 1st address for flash config cycles	*/
+#define CONFIG_SYS_FLASH_ADDR1		0x2AAA	/* 2nd address for flash config cycles	*/
 /*
  * The following defines are added for buggy IOP480 byte interface.
  * All other boards should use the standard values (CPCI405 etc.)
  */
-#define CFG_FLASH_READ0		0x0000	/* 0 is standard			*/
-#define CFG_FLASH_READ1		0x0001	/* 1 is standard			*/
-#define CFG_FLASH_READ2		0x0002	/* 2 is standard			*/
+#define CONFIG_SYS_FLASH_READ0		0x0000	/* 0 is standard			*/
+#define CONFIG_SYS_FLASH_READ1		0x0001	/* 1 is standard			*/
+#define CONFIG_SYS_FLASH_READ2		0x0002	/* 2 is standard			*/
 
-#define CFG_FLASH_EMPTY_INFO		/* print 'E' for empty sector on flinfo */
+#define CONFIG_SYS_FLASH_EMPTY_INFO		/* print 'E' for empty sector on flinfo */
 
-#define CFG_NVRAM_BASE_ADDR	0xf0200000		/* NVRAM base address	*/
-#define CFG_NVRAM_SIZE		(32*1024)		/* NVRAM size		*/
-#define CFG_VXWORKS_MAC_PTR     (CFG_NVRAM_BASE_ADDR+0x6900) /* VxWorks eth-addr*/
+#define CONFIG_SYS_NVRAM_BASE_ADDR	0xf0200000		/* NVRAM base address	*/
+#define CONFIG_SYS_NVRAM_SIZE		(32*1024)		/* NVRAM size		*/
+#define CONFIG_SYS_VXWORKS_MAC_PTR     (CONFIG_SYS_NVRAM_BASE_ADDR+0x6900) /* VxWorks eth-addr*/
 
 #if 1 /* Use NVRAM for environment variables */
 /*-----------------------------------------------------------------------
  * NVRAM organization
  */
-#define CFG_ENV_IS_IN_NVRAM	1	/* use NVRAM for environment vars	*/
-#define CFG_ENV_SIZE		0x1000		/* Size of Environment vars	*/
-#define CFG_ENV_ADDR		\
-	(CFG_NVRAM_BASE_ADDR+CFG_NVRAM_SIZE-CFG_ENV_SIZE)	/* Env	*/
+#define CONFIG_ENV_IS_IN_NVRAM	1	/* use NVRAM for environment vars	*/
+#define CONFIG_ENV_SIZE		0x1000		/* Size of Environment vars	*/
+#define CONFIG_ENV_ADDR		\
+	(CONFIG_SYS_NVRAM_BASE_ADDR+CONFIG_SYS_NVRAM_SIZE-CONFIG_ENV_SIZE)	/* Env	*/
 
 #else /* Use EEPROM for environment variables */
 
-#define CFG_ENV_IS_IN_EEPROM    1       /* use EEPROM for environment vars */
-#define CFG_ENV_OFFSET          0x000   /* environment starts at the beginning of the EEPROM */
-#define CFG_ENV_SIZE            0x400   /* 1024 bytes may be used for env vars */
+#define CONFIG_ENV_IS_IN_EEPROM    1       /* use EEPROM for environment vars */
+#define CONFIG_ENV_OFFSET          0x000   /* environment starts at the beginning of the EEPROM */
+#define CONFIG_ENV_SIZE            0x400   /* 1024 bytes may be used for env vars */
 				   /* total size of a CAT24WC08 is 1024 bytes */
 #endif
 
@@ -253,18 +254,17 @@
  * I2C EEPROM (CAT24WC08) for environment
  */
 #define CONFIG_HARD_I2C			/* I2c with hardware support */
-#define CFG_I2C_SPEED		400000	/* I2C speed and slave address */
-#define CFG_I2C_SLAVE		0x7F
+#define CONFIG_SYS_I2C_SPEED		400000	/* I2C speed and slave address */
+#define CONFIG_SYS_I2C_SLAVE		0x7F
 
-#define CFG_I2C_EEPROM_ADDR	0x50	/* EEPROM CAT28WC08		*/
-#define CFG_I2C_EEPROM_ADDR_LEN 1	/* Bytes of address		*/
+#define CONFIG_SYS_I2C_EEPROM_ADDR	0x50	/* EEPROM CAT28WC08		*/
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1	/* Bytes of address		*/
 /* mask of address bits that overflow into the "EEPROM chip address"	*/
-#define CFG_I2C_EEPROM_ADDR_OVERFLOW	0x07
-#define CFG_EEPROM_PAGE_WRITE_BITS 4	/* The Catalyst CAT24WC08 has	*/
+#define CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW	0x07
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 4	/* The Catalyst CAT24WC08 has	*/
 					/* 16 byte page write mode using*/
 					/* last 4 bits of the address	*/
-#define CFG_EEPROM_PAGE_WRITE_DELAY_MS	10   /* and takes up to 10 msec */
-#define CFG_EEPROM_PAGE_WRITE_ENABLE
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	10   /* and takes up to 10 msec */
 
 /*
  * Init Memory Controller:
@@ -280,54 +280,54 @@
  */
 
 /* Memory Bank 0 (Flash Bank 0) initialization					*/
-#define CFG_EBC_PB0AP		0x92015480
-#define CFG_EBC_PB0CR		0xFFC5A000  /* BAS=0xFFC,BS=4MB,BU=R/W,BW=16bit */
+#define CONFIG_SYS_EBC_PB0AP		0x92015480
+#define CONFIG_SYS_EBC_PB0CR		0xFFC5A000  /* BAS=0xFFC,BS=4MB,BU=R/W,BW=16bit */
 
 /* Memory Bank 1 (Flash Bank 1) initialization					*/
-#define CFG_EBC_PB1AP		0x92015480
-#define CFG_EBC_PB1CR		0xFF85A000  /* BAS=0xFF8,BS=4MB,BU=R/W,BW=16bit */
+#define CONFIG_SYS_EBC_PB1AP		0x92015480
+#define CONFIG_SYS_EBC_PB1CR		0xFF85A000  /* BAS=0xFF8,BS=4MB,BU=R/W,BW=16bit */
 
 /* Memory Bank 2 (CAN0, 1, 2, Codeswitch) initialization			*/
-#define CFG_EBC_PB2AP		0x010053C0  /* BWT=2,WBN=1,WBF=1,TH=1,RE=1,SOR=1,BEM=1 */
-#define CFG_EBC_PB2CR		0xF0018000  /* BAS=0xF00,BS=1MB,BU=R/W,BW=8bit	*/
+#define CONFIG_SYS_EBC_PB2AP		0x010053C0  /* BWT=2,WBN=1,WBF=1,TH=1,RE=1,SOR=1,BEM=1 */
+#define CONFIG_SYS_EBC_PB2CR		0xF0018000  /* BAS=0xF00,BS=1MB,BU=R/W,BW=8bit	*/
 
 /* Memory Bank 3 (CompactFlash IDE) initialization				*/
-#define CFG_EBC_PB3AP		0x010053C0  /* BWT=2,WBN=1,WBF=1,TH=1,RE=1,SOR=1,BEM=1 */
-#define CFG_EBC_PB3CR		0xF011A000  /* BAS=0xF01,BS=1MB,BU=R/W,BW=16bit */
+#define CONFIG_SYS_EBC_PB3AP		0x010053C0  /* BWT=2,WBN=1,WBF=1,TH=1,RE=1,SOR=1,BEM=1 */
+#define CONFIG_SYS_EBC_PB3CR		0xF011A000  /* BAS=0xF01,BS=1MB,BU=R/W,BW=16bit */
 
 /* Memory Bank 4 (NVRAM) initialization						*/
-#define CFG_EBC_PB4AP		0x01005280  /* TWT=2,WBN=1,WBF=1,TH=1,SOR=1	*/
-#define CFG_EBC_PB4CR		0xF0218000  /* BAS=0xF02,BS=1MB,BU=R/W,BW=8bit	*/
+#define CONFIG_SYS_EBC_PB4AP		0x01005280  /* TWT=2,WBN=1,WBF=1,TH=1,SOR=1	*/
+#define CONFIG_SYS_EBC_PB4CR		0xF0218000  /* BAS=0xF02,BS=1MB,BU=R/W,BW=8bit	*/
 
 /* Memory Bank 5 (Quart) initialization						*/
-#define CFG_EBC_PB5AP		0x04005B80  /* TWT=8,WBN=1,WBF=1,TH=5,RE=1,SOR=1*/
-#define CFG_EBC_PB5CR		0xF0318000  /* BAS=0xF03,BS=1MB,BU=R/W,BW=8bit	*/
+#define CONFIG_SYS_EBC_PB5AP		0x04005B80  /* TWT=8,WBN=1,WBF=1,TH=5,RE=1,SOR=1*/
+#define CONFIG_SYS_EBC_PB5CR		0xF0318000  /* BAS=0xF03,BS=1MB,BU=R/W,BW=8bit	*/
 
 /*-----------------------------------------------------------------------
  * FPGA stuff
  */
 
 /* FPGA program pin configuration */
-#define CFG_FPGA_PRG		0x04000000  /* FPGA program pin (ppc output) */
-#define CFG_FPGA_CLK		0x02000000  /* FPGA clk pin (ppc output)     */
-#define CFG_FPGA_DATA		0x01000000  /* FPGA data pin (ppc output)    */
-#define CFG_FPGA_INIT		0x00400000  /* FPGA init pin (ppc input)     */
-#define CFG_FPGA_DONE		0x00800000  /* FPGA done pin (ppc input)     */
+#define CONFIG_SYS_FPGA_PRG		0x04000000  /* FPGA program pin (ppc output) */
+#define CONFIG_SYS_FPGA_CLK		0x02000000  /* FPGA clk pin (ppc output)     */
+#define CONFIG_SYS_FPGA_DATA		0x01000000  /* FPGA data pin (ppc output)    */
+#define CONFIG_SYS_FPGA_INIT		0x00400000  /* FPGA init pin (ppc input)     */
+#define CONFIG_SYS_FPGA_DONE		0x00800000  /* FPGA done pin (ppc input)     */
 
 /*-----------------------------------------------------------------------
  * Definitions for initial stack pointer and data area (in data cache)
  */
 #if 1 /* test-only */
-#define CFG_INIT_DCACHE_CS	7	/* use cs # 7 for data cache memory    */
+#define CONFIG_SYS_INIT_DCACHE_CS	7	/* use cs # 7 for data cache memory    */
 
-#define CFG_INIT_RAM_ADDR	0x40000000  /* use data cache		       */
+#define CONFIG_SYS_INIT_RAM_ADDR	0x40000000  /* use data cache		       */
 #else
-#define CFG_INIT_RAM_ADDR	0x00df0000 /* inside of SDRAM			*/
+#define CONFIG_SYS_INIT_RAM_ADDR	0x00df0000 /* inside of SDRAM			*/
 #endif
-#define CFG_INIT_RAM_END	0x2000	/* End of used area in RAM	       */
-#define CFG_GBL_DATA_SIZE      128  /* size in bytes reserved for initial data */
-#define CFG_GBL_DATA_OFFSET    (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_INIT_RAM_END	0x2000	/* End of used area in RAM	       */
+#define CONFIG_SYS_GBL_DATA_SIZE      128  /* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET    (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
 
 /*
diff --git a/include/configs/CPCI4052.h b/include/configs/CPCI4052.h
index fd49f569a..e231fa705 100644
--- a/include/configs/CPCI4052.h
+++ b/include/configs/CPCI4052.h
@@ -52,8 +52,9 @@
 #define CONFIG_PREBOOT                  /* enable preboot variable      */
 
 #define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
-#define CFG_LOADS_BAUD_CHANGE	1	/* allow baudrate change	*/
+#define CONFIG_SYS_LOADS_BAUD_CHANGE	1	/* allow baudrate change	*/
 
+#define CONFIG_PPC4xx_EMAC
 #define CONFIG_MII		1	/* MII PHY management		*/
 #define CONFIG_PHY_ADDR		0	/* PHY address			*/
 #define CONFIG_LXT971_NO_SLEEP  1       /* disable sleep mode in LXT971 */
@@ -106,45 +107,47 @@
 /*
  * Miscellaneous configurable options
  */
-#define CFG_LONGHELP			/* undef to save memory		*/
-#define CFG_PROMPT	"=> "		/* Monitor Command Prompt	*/
+#define CONFIG_SYS_LONGHELP			/* undef to save memory		*/
+#define CONFIG_SYS_PROMPT	"=> "		/* Monitor Command Prompt	*/
 
-#undef	CFG_HUSH_PARSER			/* use "hush" command parser	*/
-#ifdef	CFG_HUSH_PARSER
-#define CFG_PROMPT_HUSH_PS2	"> "
+#undef	CONFIG_SYS_HUSH_PARSER			/* use "hush" command parser	*/
+#ifdef	CONFIG_SYS_HUSH_PARSER
+#define CONFIG_SYS_PROMPT_HUSH_PS2	"> "
 #endif
 
 #if defined(CONFIG_CMD_KGDB)
-#define CFG_CBSIZE	1024		/* Console I/O Buffer Size	*/
+#define CONFIG_SYS_CBSIZE	1024		/* Console I/O Buffer Size	*/
 #else
-#define CFG_CBSIZE	256		/* Console I/O Buffer Size	*/
+#define CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size	*/
 #endif
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define CFG_MAXARGS	16		/* max number of command args	*/
-#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS	16		/* max number of command args	*/
+#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
 
-#define CFG_DEVICE_NULLDEV	1	/* include nulldev device	*/
+#define CONFIG_SYS_DEVICE_NULLDEV	1	/* include nulldev device	*/
 
-#define CFG_CONSOLE_INFO_QUIET	1	/* don't print console @ startup*/
+#define CONFIG_SYS_CONSOLE_INFO_QUIET	1	/* don't print console @ startup*/
 
 #define CONFIG_AUTO_COMPLETE	1       /* add autocompletion support   */
 
-#define CFG_MEMTEST_START	0x0400000	/* memtest works on	*/
-#define CFG_MEMTEST_END		0x0C00000	/* 4 ... 12 MB in DRAM	*/
+#define CONFIG_SYS_MEMTEST_START	0x0400000	/* memtest works on	*/
+#define CONFIG_SYS_MEMTEST_END		0x0C00000	/* 4 ... 12 MB in DRAM	*/
 
-#undef	CFG_EXT_SERIAL_CLOCK	       /* no external serial clock used */
-#define CFG_IGNORE_405_UART_ERRATA_59	/* ignore ppc405gp errata #59	*/
-#define CFG_BASE_BAUD	    691200
+#undef	CONFIG_SYS_EXT_SERIAL_CLOCK	       /* no external serial clock used */
+#define CONFIG_SYS_IGNORE_405_UART_ERRATA_59	/* ignore ppc405gp errata #59	*/
+#define CONFIG_SYS_BASE_BAUD	    691200
 
 /* The following table includes the supported baudrates */
-#define CFG_BAUDRATE_TABLE	\
+#define CONFIG_SYS_BAUDRATE_TABLE	\
 	{ 300, 600, 1200, 2400, 4800, 9600, 19200, 38400,     \
 	 57600, 115200, 230400, 460800, 921600 }
 
-#define CFG_LOAD_ADDR	0x100000	/* default load address */
-#define CFG_EXTBDINFO	1		/* To use extended board_into (bd_t) */
+#define CONFIG_SYS_LOAD_ADDR	0x100000	/* default load address */
+#define CONFIG_SYS_EXTBDINFO	1		/* To use extended board_into (bd_t) */
 
-#define CFG_HZ		1000		/* decrementer freq: 1 ms ticks */
+#define CONFIG_SYS_HZ		1000		/* decrementer freq: 1 ms ticks */
+
+#define CONFIG_CMDLINE_EDITING		/* add command line history	*/
 
 #define CONFIG_LOOPW            1       /* enable loopw command         */
 
@@ -152,7 +155,7 @@
 
 #define CONFIG_VERSION_VARIABLE 1	/* include version env variable */
 
-#define CFG_RX_ETH_BUFFER	16	/* use 16 rx buffer on 405 emac */
+#define CONFIG_SYS_RX_ETH_BUFFER	16	/* use 16 rx buffer on 405 emac */
 
 /*-----------------------------------------------------------------------
  * PCI stuff
@@ -173,16 +176,16 @@
 
 #define CONFIG_PCI_BOOTDELAY    0       /* enable pci bootdelay variable*/
 
-#define CFG_PCI_SUBSYS_VENDORID 0x12FE  /* PCI Vendor ID: esd gmbh      */
-#define CFG_PCI_SUBSYS_DEVICEID 0x0405  /* PCI Device ID: CPCI-405      */
-#define CFG_PCI_SUBSYS_DEVICEID2 0x0406 /* PCI Device ID: CPCI-405-A    */
-#define CFG_PCI_CLASSCODE       0x0b20  /* PCI Class Code: Processor/PPC*/
-#define CFG_PCI_PTM1LA  (bd->bi_memstart) /* point to sdram               */
-#define CFG_PCI_PTM1MS  (~(bd->bi_memsize - 1) | 1) /* memsize, enable hard-wired to 1 */
-#define CFG_PCI_PTM1PCI 0x00000000      /* Host: use this pci address   */
-#define CFG_PCI_PTM2LA  0xffc00000      /* point to flash               */
-#define CFG_PCI_PTM2MS  0xffc00001      /* 4MB, enable                  */
-#define CFG_PCI_PTM2PCI 0x04000000      /* Host: use this pci address   */
+#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x12FE  /* PCI Vendor ID: esd gmbh      */
+#define CONFIG_SYS_PCI_SUBSYS_DEVICEID 0x0405  /* PCI Device ID: CPCI-405      */
+#define CONFIG_SYS_PCI_SUBSYS_DEVICEID2 0x0406 /* PCI Device ID: CPCI-405-A    */
+#define CONFIG_SYS_PCI_CLASSCODE       0x0b20  /* PCI Class Code: Processor/PPC*/
+#define CONFIG_SYS_PCI_PTM1LA  (bd->bi_memstart) /* point to sdram               */
+#define CONFIG_SYS_PCI_PTM1MS  (~(bd->bi_memsize - 1) | 1) /* memsize, enable hard-wired to 1 */
+#define CONFIG_SYS_PCI_PTM1PCI 0x00000000      /* Host: use this pci address   */
+#define CONFIG_SYS_PCI_PTM2LA  0xffc00000      /* point to flash               */
+#define CONFIG_SYS_PCI_PTM2MS  0xffc00001      /* 4MB, enable                  */
+#define CONFIG_SYS_PCI_PTM2PCI 0x04000000      /* Host: use this pci address   */
 
 /*-----------------------------------------------------------------------
  * IDE/ATA stuff
@@ -192,92 +195,95 @@
 #undef	CONFIG_IDE_LED			/* no led for ide supported	*/
 #define CONFIG_IDE_RESET	1	/* reset for ide supported	*/
 
-#define CFG_IDE_MAXBUS		1		/* max. 1 IDE busses	*/
-#define CFG_IDE_MAXDEVICE	(CFG_IDE_MAXBUS*1) /* max. 1 drives per IDE bus */
+#define CONFIG_SYS_IDE_MAXBUS		1		/* max. 1 IDE busses	*/
+#define CONFIG_SYS_IDE_MAXDEVICE	(CONFIG_SYS_IDE_MAXBUS*1) /* max. 1 drives per IDE bus */
 
-#define CFG_ATA_BASE_ADDR	0xF0100000
-#define CFG_ATA_IDE0_OFFSET	0x0000
+#define CONFIG_SYS_ATA_BASE_ADDR	0xF0100000
+#define CONFIG_SYS_ATA_IDE0_OFFSET	0x0000
 
-#define CFG_ATA_DATA_OFFSET	0x0000	/* Offset for data I/O			*/
-#define CFG_ATA_REG_OFFSET	0x0000	/* Offset for normal register accesses	*/
-#define CFG_ATA_ALT_OFFSET	0x0000	/* Offset for alternate registers	*/
+#define CONFIG_SYS_ATA_DATA_OFFSET	0x0000	/* Offset for data I/O			*/
+#define CONFIG_SYS_ATA_REG_OFFSET	0x0000	/* Offset for normal register accesses	*/
+#define CONFIG_SYS_ATA_ALT_OFFSET	0x0000	/* Offset for alternate registers	*/
 
 /*-----------------------------------------------------------------------
  * Start addresses for the final memory configuration
  * (Set up by the startup code)
- * Please note that CFG_SDRAM_BASE _must_ start at 0
+ * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
  */
-#define CFG_SDRAM_BASE		0x00000000
-#define CFG_FLASH_BASE		0xFFFC0000
-#define CFG_MONITOR_BASE	CFG_FLASH_BASE
-#define CFG_MONITOR_LEN		(256 * 1024)	/* Reserve 256 kB for Monitor	*/
-#define CFG_MALLOC_LEN		(128 * 1024)	/* Reserve 128 kB for malloc()	*/
+#define CONFIG_SYS_SDRAM_BASE		0x00000000
+#define CONFIG_SYS_FLASH_BASE		0xFFFC0000
+#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_FLASH_BASE
+#define CONFIG_SYS_MONITOR_LEN		(256 * 1024)	/* Reserve 256 kB for Monitor	*/
+#define CONFIG_SYS_MALLOC_LEN		(128 * 1024)	/* Reserve 128 kB for malloc()	*/
 
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
+#define CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
+
+#define CONFIG_OF_LIBFDT
+#define CONFIG_OF_BOARD_SETUP
+
 /*-----------------------------------------------------------------------
  * FLASH organization
  */
-#define CFG_MAX_FLASH_BANKS	2	/* max number of memory banks		*/
-#define CFG_MAX_FLASH_SECT	256	/* max number of sectors on one chip	*/
+#define CONFIG_SYS_MAX_FLASH_BANKS	2	/* max number of memory banks		*/
+#define CONFIG_SYS_MAX_FLASH_SECT	256	/* max number of sectors on one chip	*/
 
-#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
-#define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
+#define CONFIG_SYS_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
+#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
 
-#define CFG_FLASH_WORD_SIZE	unsigned short	/* flash word size (width)	*/
-#define CFG_FLASH_ADDR0		0x5555	/* 1st address for flash config cycles	*/
-#define CFG_FLASH_ADDR1		0x2AAA	/* 2nd address for flash config cycles	*/
+#define CONFIG_SYS_FLASH_WORD_SIZE	unsigned short	/* flash word size (width)	*/
+#define CONFIG_SYS_FLASH_ADDR0		0x5555	/* 1st address for flash config cycles	*/
+#define CONFIG_SYS_FLASH_ADDR1		0x2AAA	/* 2nd address for flash config cycles	*/
 /*
  * The following defines are added for buggy IOP480 byte interface.
  * All other boards should use the standard values (CPCI405 etc.)
  */
-#define CFG_FLASH_READ0		0x0000	/* 0 is standard			*/
-#define CFG_FLASH_READ1		0x0001	/* 1 is standard			*/
-#define CFG_FLASH_READ2		0x0002	/* 2 is standard			*/
+#define CONFIG_SYS_FLASH_READ0		0x0000	/* 0 is standard			*/
+#define CONFIG_SYS_FLASH_READ1		0x0001	/* 1 is standard			*/
+#define CONFIG_SYS_FLASH_READ2		0x0002	/* 2 is standard			*/
 
-#define CFG_FLASH_EMPTY_INFO		/* print 'E' for empty sector on flinfo */
+#define CONFIG_SYS_FLASH_EMPTY_INFO		/* print 'E' for empty sector on flinfo */
 
 #if 0 /* Use NVRAM for environment variables */
 /*-----------------------------------------------------------------------
  * NVRAM organization
  */
-#define CFG_ENV_IS_IN_NVRAM	1	/* use NVRAM for environment vars	*/
-#define CFG_ENV_SIZE		0x0ff8		/* Size of Environment vars	*/
-#define CFG_ENV_ADDR		\
-	(CFG_NVRAM_BASE_ADDR+CFG_NVRAM_SIZE-(CFG_ENV_SIZE+8))	/* Env	*/
+#define CONFIG_ENV_IS_IN_NVRAM	1	/* use NVRAM for environment vars	*/
+#define CONFIG_ENV_SIZE		0x0ff8		/* Size of Environment vars	*/
+#define CONFIG_ENV_ADDR		\
+	(CONFIG_SYS_NVRAM_BASE_ADDR+CONFIG_SYS_NVRAM_SIZE-(CONFIG_ENV_SIZE+8))	/* Env	*/
 
 #else /* Use EEPROM for environment variables */
 
-#define CFG_ENV_IS_IN_EEPROM	1	/* use EEPROM for environment vars */
-#define CFG_ENV_OFFSET		0x000	/* environment starts at the beginning of the EEPROM */
-#define CFG_ENV_SIZE		0x800	/* 2048 bytes may be used for env vars*/
+#define CONFIG_ENV_IS_IN_EEPROM	1	/* use EEPROM for environment vars */
+#define CONFIG_ENV_OFFSET		0x000	/* environment starts at the beginning of the EEPROM */
+#define CONFIG_ENV_SIZE		0x800	/* 2048 bytes may be used for env vars*/
 				   /* total size of a CAT24WC16 is 2048 bytes */
 #endif
 
-#define CFG_NVRAM_BASE_ADDR	0xf0200000		/* NVRAM base address	*/
-#define CFG_NVRAM_SIZE		(32*1024)		/* NVRAM size		*/
-#define CFG_VXWORKS_MAC_PTR     (CFG_NVRAM_BASE_ADDR+0x6900) /* VxWorks eth-addr*/
+#define CONFIG_SYS_NVRAM_BASE_ADDR	0xf0200000		/* NVRAM base address	*/
+#define CONFIG_SYS_NVRAM_SIZE		(32*1024)		/* NVRAM size		*/
+#define CONFIG_SYS_VXWORKS_MAC_PTR     (CONFIG_SYS_NVRAM_BASE_ADDR+0x6900) /* VxWorks eth-addr*/
 
 /*-----------------------------------------------------------------------
  * I2C EEPROM (CAT24WC16) for environment
  */
 #define CONFIG_HARD_I2C			/* I2c with hardware support */
-#define CFG_I2C_SPEED		400000	/* I2C speed and slave address */
-#define CFG_I2C_SLAVE		0x7F
+#define CONFIG_SYS_I2C_SPEED		400000	/* I2C speed and slave address */
+#define CONFIG_SYS_I2C_SLAVE		0x7F
 
-#define CFG_I2C_EEPROM_ADDR	0x50	/* EEPROM CAT28WC08		*/
-#define CFG_I2C_EEPROM_ADDR_LEN 1	/* Bytes of address		*/
+#define CONFIG_SYS_I2C_EEPROM_ADDR	0x50	/* EEPROM CAT28WC08		*/
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1	/* Bytes of address		*/
 /* mask of address bits that overflow into the "EEPROM chip address"	*/
-#define CFG_I2C_EEPROM_ADDR_OVERFLOW	0x07
-#define CFG_EEPROM_PAGE_WRITE_BITS 4	/* The Catalyst CAT24WC08 has	*/
+#define CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW	0x07
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 4	/* The Catalyst CAT24WC08 has	*/
 					/* 16 byte page write mode using*/
 					/* last 4 bits of the address	*/
-#define CFG_EEPROM_PAGE_WRITE_DELAY_MS	10   /* and takes up to 10 msec */
-#define CFG_EEPROM_PAGE_WRITE_ENABLE
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	10   /* and takes up to 10 msec */
 
 /*
  * Init Memory Controller:
@@ -293,88 +299,88 @@
  */
 
 /* Memory Bank 0 (Flash Bank 0) initialization					*/
-#define CFG_EBC_PB0AP		0x92015480
-#define CFG_EBC_PB0CR		0xFFC5A000  /* BAS=0xFFC,BS=4MB,BU=R/W,BW=16bit */
+#define CONFIG_SYS_EBC_PB0AP		0x92015480
+#define CONFIG_SYS_EBC_PB0CR		0xFFC5A000  /* BAS=0xFFC,BS=4MB,BU=R/W,BW=16bit */
 
 /* Memory Bank 1 (Flash Bank 1) initialization					*/
-#define CFG_EBC_PB1AP		0x92015480
-#define CFG_EBC_PB1CR		0xFF85A000  /* BAS=0xFF8,BS=4MB,BU=R/W,BW=16bit */
+#define CONFIG_SYS_EBC_PB1AP		0x92015480
+#define CONFIG_SYS_EBC_PB1CR		0xFF85A000  /* BAS=0xFF8,BS=4MB,BU=R/W,BW=16bit */
 
 /* Memory Bank 2 (CAN0, 1) initialization					*/
-#define CFG_EBC_PB2AP		0x010053C0  /* BWT=2,WBN=1,WBF=1,TH=1,RE=1,SOR=1,BEM=1 */
-#define CFG_EBC_PB2CR		0xF0018000  /* BAS=0xF00,BS=1MB,BU=R/W,BW=8bit	*/
-#define CFG_LED_ADDR		0xF0000380
+#define CONFIG_SYS_EBC_PB2AP		0x010053C0  /* BWT=2,WBN=1,WBF=1,TH=1,RE=1,SOR=1,BEM=1 */
+#define CONFIG_SYS_EBC_PB2CR		0xF0018000  /* BAS=0xF00,BS=1MB,BU=R/W,BW=8bit	*/
+#define CONFIG_SYS_LED_ADDR		0xF0000380
 
 /* Memory Bank 3 (CompactFlash IDE) initialization				*/
-#define CFG_EBC_PB3AP		0x010053C0  /* BWT=2,WBN=1,WBF=1,TH=1,RE=1,SOR=1,BEM=1 */
-#define CFG_EBC_PB3CR		0xF011A000  /* BAS=0xF01,BS=1MB,BU=R/W,BW=16bit */
+#define CONFIG_SYS_EBC_PB3AP		0x010053C0  /* BWT=2,WBN=1,WBF=1,TH=1,RE=1,SOR=1,BEM=1 */
+#define CONFIG_SYS_EBC_PB3CR		0xF011A000  /* BAS=0xF01,BS=1MB,BU=R/W,BW=16bit */
 
 /* Memory Bank 4 (NVRAM/RTC) initialization					*/
-/*#define CFG_EBC_PB4AP		  0x01805280  / * TWT=3,WBN=1,WBF=1,TH=1,SOR=1	   */
-#define CFG_EBC_PB4AP		0x01805680  /* TWT=3,WBN=1,WBF=1,TH=3,SOR=1	*/
-#define CFG_EBC_PB4CR		0xF0218000  /* BAS=0xF02,BS=1MB,BU=R/W,BW=8bit	*/
+/*#define CONFIG_SYS_EBC_PB4AP		  0x01805280  / * TWT=3,WBN=1,WBF=1,TH=1,SOR=1	   */
+#define CONFIG_SYS_EBC_PB4AP		0x01805680  /* TWT=3,WBN=1,WBF=1,TH=3,SOR=1	*/
+#define CONFIG_SYS_EBC_PB4CR		0xF0218000  /* BAS=0xF02,BS=1MB,BU=R/W,BW=8bit	*/
 
 /* Memory Bank 5 (optional Quart) initialization				*/
-#define CFG_EBC_PB5AP		0x04005B80  /* TWT=8,WBN=1,WBF=1,TH=5,RE=1,SOR=1*/
-#define CFG_EBC_PB5CR		0xF0318000  /* BAS=0xF03,BS=1MB,BU=R/W,BW=8bit	*/
+#define CONFIG_SYS_EBC_PB5AP		0x04005B80  /* TWT=8,WBN=1,WBF=1,TH=5,RE=1,SOR=1*/
+#define CONFIG_SYS_EBC_PB5CR		0xF0318000  /* BAS=0xF03,BS=1MB,BU=R/W,BW=8bit	*/
 
 /* Memory Bank 6 (FPGA internal) initialization					*/
-#define CFG_EBC_PB6AP		0x010053C0  /* BWT=2,WBN=1,WBF=1,TH=1,RE=1,SOR=1,BEM=1 */
-#define CFG_EBC_PB6CR		0xF041A000  /* BAS=0xF01,BS=1MB,BU=R/W,BW=16bit */
-#define CFG_FPGA_BASE_ADDR	0xF0400000
+#define CONFIG_SYS_EBC_PB6AP		0x010053C0  /* BWT=2,WBN=1,WBF=1,TH=1,RE=1,SOR=1,BEM=1 */
+#define CONFIG_SYS_EBC_PB6CR		0xF041A000  /* BAS=0xF01,BS=1MB,BU=R/W,BW=16bit */
+#define CONFIG_SYS_FPGA_BASE_ADDR	0xF0400000
 
 /*-----------------------------------------------------------------------
  * FPGA stuff
  */
 /* FPGA internal regs */
-#define CFG_FPGA_MODE		0x00
-#define CFG_FPGA_STATUS		0x02
-#define CFG_FPGA_TS		0x04
-#define CFG_FPGA_TS_LOW		0x06
-#define CFG_FPGA_TS_CAP0	0x10
-#define CFG_FPGA_TS_CAP0_LOW	0x12
-#define CFG_FPGA_TS_CAP1	0x14
-#define CFG_FPGA_TS_CAP1_LOW	0x16
-#define CFG_FPGA_TS_CAP2	0x18
-#define CFG_FPGA_TS_CAP2_LOW	0x1a
-#define CFG_FPGA_TS_CAP3	0x1c
-#define CFG_FPGA_TS_CAP3_LOW	0x1e
+#define CONFIG_SYS_FPGA_MODE		0x00
+#define CONFIG_SYS_FPGA_STATUS		0x02
+#define CONFIG_SYS_FPGA_TS		0x04
+#define CONFIG_SYS_FPGA_TS_LOW		0x06
+#define CONFIG_SYS_FPGA_TS_CAP0	0x10
+#define CONFIG_SYS_FPGA_TS_CAP0_LOW	0x12
+#define CONFIG_SYS_FPGA_TS_CAP1	0x14
+#define CONFIG_SYS_FPGA_TS_CAP1_LOW	0x16
+#define CONFIG_SYS_FPGA_TS_CAP2	0x18
+#define CONFIG_SYS_FPGA_TS_CAP2_LOW	0x1a
+#define CONFIG_SYS_FPGA_TS_CAP3	0x1c
+#define CONFIG_SYS_FPGA_TS_CAP3_LOW	0x1e
 
 /* FPGA Mode Reg */
-#define CFG_FPGA_MODE_CF_RESET	    0x0001
-#define CFG_FPGA_MODE_DUART_RESET   0x0002
-#define CFG_FPGA_MODE_ENABLE_OUTPUT 0x0004     /* only set on CPCI-405 Ver 3 */
-#define CFG_FPGA_MODE_TS_IRQ_ENABLE 0x0100
-#define CFG_FPGA_MODE_TS_IRQ_CLEAR  0x1000
-#define CFG_FPGA_MODE_TS_CLEAR	    0x2000
+#define CONFIG_SYS_FPGA_MODE_CF_RESET	    0x0001
+#define CONFIG_SYS_FPGA_MODE_DUART_RESET   0x0002
+#define CONFIG_SYS_FPGA_MODE_ENABLE_OUTPUT 0x0004     /* only set on CPCI-405 Ver 3 */
+#define CONFIG_SYS_FPGA_MODE_TS_IRQ_ENABLE 0x0100
+#define CONFIG_SYS_FPGA_MODE_TS_IRQ_CLEAR  0x1000
+#define CONFIG_SYS_FPGA_MODE_TS_CLEAR	    0x2000
 
 /* FPGA Status Reg */
-#define CFG_FPGA_STATUS_DIP0	0x0001
-#define CFG_FPGA_STATUS_DIP1	0x0002
-#define CFG_FPGA_STATUS_DIP2	0x0004
-#define CFG_FPGA_STATUS_FLASH	0x0008
-#define CFG_FPGA_STATUS_TS_IRQ	0x1000
+#define CONFIG_SYS_FPGA_STATUS_DIP0	0x0001
+#define CONFIG_SYS_FPGA_STATUS_DIP1	0x0002
+#define CONFIG_SYS_FPGA_STATUS_DIP2	0x0004
+#define CONFIG_SYS_FPGA_STATUS_FLASH	0x0008
+#define CONFIG_SYS_FPGA_STATUS_TS_IRQ	0x1000
 
-#define CFG_FPGA_SPARTAN2	1	    /* using Xilinx Spartan 2 now    */
-#define CFG_FPGA_MAX_SIZE	32*1024	    /* 32kByte is enough for XC2S15  */
+#define CONFIG_SYS_FPGA_SPARTAN2	1	    /* using Xilinx Spartan 2 now    */
+#define CONFIG_SYS_FPGA_MAX_SIZE	32*1024	    /* 32kByte is enough for XC2S15  */
 
 /* FPGA program pin configuration */
-#define CFG_FPGA_PRG		0x04000000  /* FPGA program pin (ppc output) */
-#define CFG_FPGA_CLK		0x02000000  /* FPGA clk pin (ppc output)     */
-#define CFG_FPGA_DATA		0x01000000  /* FPGA data pin (ppc output)    */
-#define CFG_FPGA_INIT		0x00010000  /* FPGA init pin (ppc input)     */
-#define CFG_FPGA_DONE		0x00008000  /* FPGA done pin (ppc input)     */
+#define CONFIG_SYS_FPGA_PRG		0x04000000  /* FPGA program pin (ppc output) */
+#define CONFIG_SYS_FPGA_CLK		0x02000000  /* FPGA clk pin (ppc output)     */
+#define CONFIG_SYS_FPGA_DATA		0x01000000  /* FPGA data pin (ppc output)    */
+#define CONFIG_SYS_FPGA_INIT		0x00010000  /* FPGA init pin (ppc input)     */
+#define CONFIG_SYS_FPGA_DONE		0x00008000  /* FPGA done pin (ppc input)     */
 
 /*-----------------------------------------------------------------------
  * Definitions for initial stack pointer and data area (in data cache)
  */
-#define CFG_INIT_DCACHE_CS	7	/* use cs # 7 for data cache memory    */
+#define CONFIG_SYS_INIT_DCACHE_CS	7	/* use cs # 7 for data cache memory    */
 
-#define CFG_INIT_RAM_ADDR	0x40000000  /* use data cache		       */
-#define CFG_INIT_RAM_END	0x2000	/* End of used area in RAM	       */
-#define CFG_GBL_DATA_SIZE      128  /* size in bytes reserved for initial data */
-#define CFG_GBL_DATA_OFFSET    (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_INIT_RAM_ADDR	0x40000000  /* use data cache		       */
+#define CONFIG_SYS_INIT_RAM_END	0x2000	/* End of used area in RAM	       */
+#define CONFIG_SYS_GBL_DATA_SIZE      128  /* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET    (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
 
 /*
diff --git a/include/configs/CPCI405AB.h b/include/configs/CPCI405AB.h
index 55dd6296d..2319c5872 100644
--- a/include/configs/CPCI405AB.h
+++ b/include/configs/CPCI405AB.h
@@ -52,8 +52,9 @@
 #define CONFIG_PREBOOT                  /* enable preboot variable      */
 
 #undef	CONFIG_LOADS_ECHO		/* echo on for serial download	*/
-#define CFG_LOADS_BAUD_CHANGE	1	/* allow baudrate change	*/
+#define CONFIG_SYS_LOADS_BAUD_CHANGE	1	/* allow baudrate change	*/
 
+#define CONFIG_PPC4xx_EMAC
 #define CONFIG_MII		1	/* MII PHY management		*/
 #define CONFIG_PHY_ADDR		0	/* PHY address			*/
 #define CONFIG_LXT971_NO_SLEEP  1       /* disable sleep mode in LXT971 */
@@ -106,49 +107,51 @@
 /*
  * Miscellaneous configurable options
  */
-#define CFG_LONGHELP			/* undef to save memory		*/
-#define CFG_PROMPT	"=> "		/* Monitor Command Prompt	*/
+#define CONFIG_SYS_LONGHELP			/* undef to save memory		*/
+#define CONFIG_SYS_PROMPT	"=> "		/* Monitor Command Prompt	*/
 
-#undef	CFG_HUSH_PARSER			/* use "hush" command parser	*/
-#ifdef	CFG_HUSH_PARSER
-#define CFG_PROMPT_HUSH_PS2	"> "
+#undef	CONFIG_SYS_HUSH_PARSER			/* use "hush" command parser	*/
+#ifdef	CONFIG_SYS_HUSH_PARSER
+#define CONFIG_SYS_PROMPT_HUSH_PS2	"> "
 #endif
 
 #if defined(CONFIG_CMD_KGDB)
-#define CFG_CBSIZE	1024		/* Console I/O Buffer Size	*/
+#define CONFIG_SYS_CBSIZE	1024		/* Console I/O Buffer Size	*/
 #else
-#define CFG_CBSIZE	256		/* Console I/O Buffer Size	*/
+#define CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size	*/
 #endif
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define CFG_MAXARGS	16		/* max number of command args	*/
-#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS	16		/* max number of command args	*/
+#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
 
-#define CFG_DEVICE_NULLDEV	1	/* include nulldev device	*/
+#define CONFIG_SYS_DEVICE_NULLDEV	1	/* include nulldev device	*/
 
-#define CFG_CONSOLE_INFO_QUIET	1	/* don't print console @ startup*/
+#define CONFIG_SYS_CONSOLE_INFO_QUIET	1	/* don't print console @ startup*/
 
-#define CFG_MEMTEST_START	0x0400000	/* memtest works on	*/
-#define CFG_MEMTEST_END		0x0C00000	/* 4 ... 12 MB in DRAM	*/
+#define CONFIG_SYS_MEMTEST_START	0x0400000	/* memtest works on	*/
+#define CONFIG_SYS_MEMTEST_END		0x0C00000	/* 4 ... 12 MB in DRAM	*/
 
-#undef	CFG_EXT_SERIAL_CLOCK	       /* no external serial clock used */
-#define CFG_IGNORE_405_UART_ERRATA_59	/* ignore ppc405gp errata #59	*/
-#define CFG_BASE_BAUD	    691200
+#undef	CONFIG_SYS_EXT_SERIAL_CLOCK	       /* no external serial clock used */
+#define CONFIG_SYS_IGNORE_405_UART_ERRATA_59	/* ignore ppc405gp errata #59	*/
+#define CONFIG_SYS_BASE_BAUD	    691200
 
 /* The following table includes the supported baudrates */
-#define CFG_BAUDRATE_TABLE	\
+#define CONFIG_SYS_BAUDRATE_TABLE	\
 	{ 300, 600, 1200, 2400, 4800, 9600, 19200, 38400,     \
 	 57600, 115200, 230400, 460800, 921600 }
 
-#define CFG_LOAD_ADDR	0x100000	/* default load address */
-#define CFG_EXTBDINFO	1		/* To use extended board_into (bd_t) */
+#define CONFIG_SYS_LOAD_ADDR	0x100000	/* default load address */
+#define CONFIG_SYS_EXTBDINFO	1		/* To use extended board_into (bd_t) */
 
-#define CFG_HZ		1000		/* decrementer freq: 1 ms ticks */
+#define CONFIG_SYS_HZ		1000		/* decrementer freq: 1 ms ticks */
+
+#define CONFIG_CMDLINE_EDITING		/* add command line history	*/
 
 #define CONFIG_ZERO_BOOTDELAY_CHECK	/* check for keypress on bootdelay==0 */
 
 #define CONFIG_VERSION_VARIABLE 1	/* include version env variable */
 
-#define CFG_RX_ETH_BUFFER	16	/* use 16 rx buffer on 405 emac */
+#define CONFIG_SYS_RX_ETH_BUFFER	16	/* use 16 rx buffer on 405 emac */
 
 /*-----------------------------------------------------------------------
  * PCI stuff
@@ -169,16 +172,16 @@
 
 #define CONFIG_PCI_BOOTDELAY	0	/* enable pci bootdelay variable*/
 
-#define CFG_PCI_SUBSYS_VENDORID 0x12FE	/* PCI Vendor ID: esd gmbh	*/
-#define CFG_PCI_SUBSYS_DEVICEID 0x0405	/* PCI Device ID: CPCI-405	*/
-#define CFG_PCI_SUBSYS_DEVICEID2 0x0406 /* PCI Device ID: CPCI-405-A	*/
-#define CFG_PCI_CLASSCODE	0x0b20	/* PCI Class Code: Processor/PPC*/
-#define CFG_PCI_PTM1LA  (bd->bi_memstart) /* point to sdram               */
-#define CFG_PCI_PTM1MS  (~(bd->bi_memsize - 1) | 1) /* memsize, enable hard-wired to 1 */
-#define CFG_PCI_PTM1PCI 0x00000000	/* Host: use this pci address	*/
-#define CFG_PCI_PTM2LA	0xffc00000	/* point to flash		*/
-#define CFG_PCI_PTM2MS	0xffc00001	/* 4MB, enable			*/
-#define CFG_PCI_PTM2PCI 0x04000000	/* Host: use this pci address	*/
+#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x12FE	/* PCI Vendor ID: esd gmbh	*/
+#define CONFIG_SYS_PCI_SUBSYS_DEVICEID 0x0405	/* PCI Device ID: CPCI-405	*/
+#define CONFIG_SYS_PCI_SUBSYS_DEVICEID2 0x0406 /* PCI Device ID: CPCI-405-A	*/
+#define CONFIG_SYS_PCI_CLASSCODE	0x0b20	/* PCI Class Code: Processor/PPC*/
+#define CONFIG_SYS_PCI_PTM1LA  (bd->bi_memstart) /* point to sdram               */
+#define CONFIG_SYS_PCI_PTM1MS  (~(bd->bi_memsize - 1) | 1) /* memsize, enable hard-wired to 1 */
+#define CONFIG_SYS_PCI_PTM1PCI 0x00000000	/* Host: use this pci address	*/
+#define CONFIG_SYS_PCI_PTM2LA	0xffc00000	/* point to flash		*/
+#define CONFIG_SYS_PCI_PTM2MS	0xffc00001	/* 4MB, enable			*/
+#define CONFIG_SYS_PCI_PTM2PCI 0x04000000	/* Host: use this pci address	*/
 
 /*-----------------------------------------------------------------------
  * IDE/ATA stuff
@@ -188,83 +191,86 @@
 #undef	CONFIG_IDE_LED			/* no led for ide supported	*/
 #define CONFIG_IDE_RESET	1	/* reset for ide supported	*/
 
-#define CFG_IDE_MAXBUS		1		/* max. 1 IDE busses	*/
-#define CFG_IDE_MAXDEVICE	(CFG_IDE_MAXBUS*1) /* max. 1 drives per IDE bus */
+#define CONFIG_SYS_IDE_MAXBUS		1		/* max. 1 IDE busses	*/
+#define CONFIG_SYS_IDE_MAXDEVICE	(CONFIG_SYS_IDE_MAXBUS*1) /* max. 1 drives per IDE bus */
 
-#define CFG_ATA_BASE_ADDR	0xF0100000
-#define CFG_ATA_IDE0_OFFSET	0x0000
+#define CONFIG_SYS_ATA_BASE_ADDR	0xF0100000
+#define CONFIG_SYS_ATA_IDE0_OFFSET	0x0000
 
-#define CFG_ATA_DATA_OFFSET	0x0000	/* Offset for data I/O			*/
-#define CFG_ATA_REG_OFFSET	0x0000	/* Offset for normal register accesses	*/
-#define CFG_ATA_ALT_OFFSET	0x0000	/* Offset for alternate registers	*/
+#define CONFIG_SYS_ATA_DATA_OFFSET	0x0000	/* Offset for data I/O			*/
+#define CONFIG_SYS_ATA_REG_OFFSET	0x0000	/* Offset for normal register accesses	*/
+#define CONFIG_SYS_ATA_ALT_OFFSET	0x0000	/* Offset for alternate registers	*/
 
 /*-----------------------------------------------------------------------
  * Start addresses for the final memory configuration
  * (Set up by the startup code)
- * Please note that CFG_SDRAM_BASE _must_ start at 0
+ * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
  */
-#define CFG_SDRAM_BASE		0x00000000
-#define CFG_FLASH_BASE		0xFFFC0000
-#define CFG_MONITOR_BASE	CFG_FLASH_BASE
-#define CFG_MONITOR_LEN		(256 * 1024)	/* Reserve 256 kB for Monitor	*/
-#define CFG_MALLOC_LEN		(256 * 1024)	/* Reserve 256 kB for malloc()	*/
+#define CONFIG_SYS_SDRAM_BASE		0x00000000
+#define CONFIG_SYS_FLASH_BASE		0xFFFC0000
+#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_FLASH_BASE
+#define CONFIG_SYS_MONITOR_LEN		(256 * 1024)	/* Reserve 256 kB for Monitor	*/
+#define CONFIG_SYS_MALLOC_LEN		(256 * 1024)	/* Reserve 256 kB for malloc()	*/
 
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
+#define CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
+
+#define CONFIG_OF_LIBFDT
+#define CONFIG_OF_BOARD_SETUP
+
 /*-----------------------------------------------------------------------
  * FLASH organization
  */
-#define CFG_MAX_FLASH_BANKS	2	/* max number of memory banks		*/
-#define CFG_MAX_FLASH_SECT	256	/* max number of sectors on one chip	*/
+#define CONFIG_SYS_MAX_FLASH_BANKS	2	/* max number of memory banks		*/
+#define CONFIG_SYS_MAX_FLASH_SECT	256	/* max number of sectors on one chip	*/
 
-#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
-#define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
+#define CONFIG_SYS_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
+#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
 
-#define CFG_FLASH_WORD_SIZE	unsigned short	/* flash word size (width)	*/
-#define CFG_FLASH_ADDR0		0x5555	/* 1st address for flash config cycles	*/
-#define CFG_FLASH_ADDR1		0x2AAA	/* 2nd address for flash config cycles	*/
+#define CONFIG_SYS_FLASH_WORD_SIZE	unsigned short	/* flash word size (width)	*/
+#define CONFIG_SYS_FLASH_ADDR0		0x5555	/* 1st address for flash config cycles	*/
+#define CONFIG_SYS_FLASH_ADDR1		0x2AAA	/* 2nd address for flash config cycles	*/
 /*
  * The following defines are added for buggy IOP480 byte interface.
  * All other boards should use the standard values (CPCI405 etc.)
  */
-#define CFG_FLASH_READ0		0x0000	/* 0 is standard			*/
-#define CFG_FLASH_READ1		0x0001	/* 1 is standard			*/
-#define CFG_FLASH_READ2		0x0002	/* 2 is standard			*/
+#define CONFIG_SYS_FLASH_READ0		0x0000	/* 0 is standard			*/
+#define CONFIG_SYS_FLASH_READ1		0x0001	/* 1 is standard			*/
+#define CONFIG_SYS_FLASH_READ2		0x0002	/* 2 is standard			*/
 
-#define CFG_FLASH_EMPTY_INFO		/* print 'E' for empty sector on flinfo */
+#define CONFIG_SYS_FLASH_EMPTY_INFO		/* print 'E' for empty sector on flinfo */
 
 /*-----------------------------------------------------------------------
  * I2C EEPROM (CAT24WC32) for environment
  */
 #define CONFIG_HARD_I2C			/* I2c with hardware support */
-#define CFG_I2C_SPEED		100000	/* I2C speed and slave address */
-#define CFG_I2C_SLAVE		0x7F
+#define CONFIG_SYS_I2C_SPEED		100000	/* I2C speed and slave address */
+#define CONFIG_SYS_I2C_SLAVE		0x7F
 
-#define CFG_I2C_EEPROM_ADDR	0x50	/* EEPROM CAT28WC32		*/
-#define CFG_I2C_EEPROM_ADDR_LEN 2	/* Bytes of address		*/
+#define CONFIG_SYS_I2C_EEPROM_ADDR	0x50	/* EEPROM CAT28WC32		*/
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2	/* Bytes of address		*/
 /* mask of address bits that overflow into the "EEPROM chip address"	*/
-#define CFG_I2C_EEPROM_ADDR_OVERFLOW	0x01
-#define CFG_I2C_MULTI_EEPROMS   1       /* more than one eeprom used!   */
-#define CFG_EEPROM_PAGE_WRITE_BITS 5	/* The Catalyst CAT24WC32 has	*/
+#define CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW	0x01
+#define CONFIG_SYS_I2C_MULTI_EEPROMS   1       /* more than one eeprom used!   */
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 5	/* The Catalyst CAT24WC32 has	*/
 					/* 32 byte page write mode using*/
 					/* last 5 bits of the address	*/
-#define CFG_EEPROM_PAGE_WRITE_DELAY_MS	10   /* and takes up to 10 msec */
-#define CFG_EEPROM_PAGE_WRITE_ENABLE
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	10   /* and takes up to 10 msec */
 
 /* Use EEPROM for environment variables */
 
-#define CFG_ENV_IS_IN_EEPROM	1	/* use EEPROM for environment vars */
-#define CFG_ENV_OFFSET		0x000	/* environment starts at the beginning of the EEPROM */
-#define CFG_ENV_SIZE		0x800	/* 2048 bytes may be used for env vars*/
+#define CONFIG_ENV_IS_IN_EEPROM	1	/* use EEPROM for environment vars */
+#define CONFIG_ENV_OFFSET		0x000	/* environment starts at the beginning of the EEPROM */
+#define CONFIG_ENV_SIZE		0x800	/* 2048 bytes may be used for env vars*/
 				   /* total size of a CAT24WC32 is 4096 bytes */
 
-#define CFG_NVRAM_BASE_ADDR	0xf0200000		/* NVRAM base address	*/
-#define CFG_NVRAM_SIZE		(32*1024)		/* NVRAM size		*/
-#define CFG_VXWORKS_MAC_PTR     (CFG_NVRAM_BASE_ADDR+0x6900) /* VxWorks eth-addr*/
+#define CONFIG_SYS_NVRAM_BASE_ADDR	0xf0200000		/* NVRAM base address	*/
+#define CONFIG_SYS_NVRAM_SIZE		(32*1024)		/* NVRAM size		*/
+#define CONFIG_SYS_VXWORKS_MAC_PTR     (CONFIG_SYS_NVRAM_BASE_ADDR+0x6900) /* VxWorks eth-addr*/
 
 /*
  * Init Memory Controller:
@@ -280,92 +286,92 @@
  */
 
 /* Memory Bank 0 (Flash Bank 0) initialization					*/
-#define CFG_EBC_PB0AP		0x92015480
-#define CFG_EBC_PB0CR		0xFFC5A000  /* BAS=0xFFC,BS=4MB,BU=R/W,BW=16bit */
+#define CONFIG_SYS_EBC_PB0AP		0x92015480
+#define CONFIG_SYS_EBC_PB0CR		0xFFC5A000  /* BAS=0xFFC,BS=4MB,BU=R/W,BW=16bit */
 
 /* Memory Bank 1 (Flash Bank 1) initialization					*/
-#define CFG_EBC_PB1AP		0x92015480
-#define CFG_EBC_PB1CR		0xFF85A000  /* BAS=0xFF8,BS=4MB,BU=R/W,BW=16bit */
+#define CONFIG_SYS_EBC_PB1AP		0x92015480
+#define CONFIG_SYS_EBC_PB1CR		0xFF85A000  /* BAS=0xFF8,BS=4MB,BU=R/W,BW=16bit */
 
 /* Memory Bank 2 (CAN0, 1) initialization					*/
-#define CFG_EBC_PB2AP		0x010053C0  /* BWT=2,WBN=1,WBF=1,TH=1,RE=1,SOR=1,BEM=1 */
-#define CFG_EBC_PB2CR		0xF0018000  /* BAS=0xF00,BS=1MB,BU=R/W,BW=8bit	*/
-#define CFG_LED_ADDR		0xF0000380
+#define CONFIG_SYS_EBC_PB2AP		0x010053C0  /* BWT=2,WBN=1,WBF=1,TH=1,RE=1,SOR=1,BEM=1 */
+#define CONFIG_SYS_EBC_PB2CR		0xF0018000  /* BAS=0xF00,BS=1MB,BU=R/W,BW=8bit	*/
+#define CONFIG_SYS_LED_ADDR		0xF0000380
 
 /* Memory Bank 3 (CompactFlash IDE) initialization				*/
-#define CFG_EBC_PB3AP		0x010053C0  /* BWT=2,WBN=1,WBF=1,TH=1,RE=1,SOR=1,BEM=1 */
-#define CFG_EBC_PB3CR		0xF011A000  /* BAS=0xF01,BS=1MB,BU=R/W,BW=16bit */
+#define CONFIG_SYS_EBC_PB3AP		0x010053C0  /* BWT=2,WBN=1,WBF=1,TH=1,RE=1,SOR=1,BEM=1 */
+#define CONFIG_SYS_EBC_PB3CR		0xF011A000  /* BAS=0xF01,BS=1MB,BU=R/W,BW=16bit */
 
 /* Memory Bank 4 (NVRAM/RTC) initialization					*/
-/*#define CFG_EBC_PB4AP		  0x01805280  / * TWT=3,WBN=1,WBF=1,TH=1,SOR=1	   */
-#define CFG_EBC_PB4AP		0x01805680  /* TWT=3,WBN=1,WBF=1,TH=3,SOR=1	*/
-#define CFG_EBC_PB4CR		0xF0218000  /* BAS=0xF02,BS=1MB,BU=R/W,BW=8bit	*/
+/*#define CONFIG_SYS_EBC_PB4AP		  0x01805280  / * TWT=3,WBN=1,WBF=1,TH=1,SOR=1	   */
+#define CONFIG_SYS_EBC_PB4AP		0x01805680  /* TWT=3,WBN=1,WBF=1,TH=3,SOR=1	*/
+#define CONFIG_SYS_EBC_PB4CR		0xF0218000  /* BAS=0xF02,BS=1MB,BU=R/W,BW=8bit	*/
 
 /* Memory Bank 5 (optional Quart) initialization				*/
-#define CFG_EBC_PB5AP		0x04005B80  /* TWT=8,WBN=1,WBF=1,TH=5,RE=1,SOR=1*/
-#define CFG_EBC_PB5CR		0xF0318000  /* BAS=0xF03,BS=1MB,BU=R/W,BW=8bit	*/
+#define CONFIG_SYS_EBC_PB5AP		0x04005B80  /* TWT=8,WBN=1,WBF=1,TH=5,RE=1,SOR=1*/
+#define CONFIG_SYS_EBC_PB5CR		0xF0318000  /* BAS=0xF03,BS=1MB,BU=R/W,BW=8bit	*/
 
 /* Memory Bank 6 (FPGA internal) initialization					*/
-#define CFG_EBC_PB6AP		0x010053C0  /* BWT=2,WBN=1,WBF=1,TH=1,RE=1,SOR=1,BEM=1 */
-#define CFG_EBC_PB6CR		0xF041A000  /* BAS=0xF01,BS=1MB,BU=R/W,BW=16bit */
-#define CFG_FPGA_BASE_ADDR	0xF0400000
+#define CONFIG_SYS_EBC_PB6AP		0x010053C0  /* BWT=2,WBN=1,WBF=1,TH=1,RE=1,SOR=1,BEM=1 */
+#define CONFIG_SYS_EBC_PB6CR		0xF041A000  /* BAS=0xF01,BS=1MB,BU=R/W,BW=16bit */
+#define CONFIG_SYS_FPGA_BASE_ADDR	0xF0400000
 
 /*-----------------------------------------------------------------------
  * FPGA stuff
  */
 /* FPGA internal regs */
-#define CFG_FPGA_MODE		0x00
-#define CFG_FPGA_STATUS		0x02
-#define CFG_FPGA_TS		0x04
-#define CFG_FPGA_TS_LOW		0x06
-#define CFG_FPGA_TS_CAP0	0x10
-#define CFG_FPGA_TS_CAP0_LOW	0x12
-#define CFG_FPGA_TS_CAP1	0x14
-#define CFG_FPGA_TS_CAP1_LOW	0x16
-#define CFG_FPGA_TS_CAP2	0x18
-#define CFG_FPGA_TS_CAP2_LOW	0x1a
-#define CFG_FPGA_TS_CAP3	0x1c
-#define CFG_FPGA_TS_CAP3_LOW	0x1e
+#define CONFIG_SYS_FPGA_MODE		0x00
+#define CONFIG_SYS_FPGA_STATUS		0x02
+#define CONFIG_SYS_FPGA_TS		0x04
+#define CONFIG_SYS_FPGA_TS_LOW		0x06
+#define CONFIG_SYS_FPGA_TS_CAP0	0x10
+#define CONFIG_SYS_FPGA_TS_CAP0_LOW	0x12
+#define CONFIG_SYS_FPGA_TS_CAP1	0x14
+#define CONFIG_SYS_FPGA_TS_CAP1_LOW	0x16
+#define CONFIG_SYS_FPGA_TS_CAP2	0x18
+#define CONFIG_SYS_FPGA_TS_CAP2_LOW	0x1a
+#define CONFIG_SYS_FPGA_TS_CAP3	0x1c
+#define CONFIG_SYS_FPGA_TS_CAP3_LOW	0x1e
 
 /* FPGA Mode Reg */
-#define CFG_FPGA_MODE_CF_RESET	    0x0001
-#define CFG_FPGA_MODE_DUART_RESET   0x0002
-#define CFG_FPGA_MODE_ENABLE_OUTPUT 0x0004     /* only set on CPCI-405 Ver 3 */
-#define CFG_FPGA_MODE_1WIRE_DIR     0x0100     /* dir=1 -> output */
-#define CFG_FPGA_MODE_SIM_OK_DIR    0x0200
-#define CFG_FPGA_MODE_TESTRIG_FAIL_DIR 0x0400
-#define CFG_FPGA_MODE_1WIRE         0x1000
-#define CFG_FPGA_MODE_SIM_OK        0x2000     /* wired-or net from all devices */
-#define CFG_FPGA_MODE_TESTRIG_FAIL  0x4000
+#define CONFIG_SYS_FPGA_MODE_CF_RESET	    0x0001
+#define CONFIG_SYS_FPGA_MODE_DUART_RESET   0x0002
+#define CONFIG_SYS_FPGA_MODE_ENABLE_OUTPUT 0x0004     /* only set on CPCI-405 Ver 3 */
+#define CONFIG_SYS_FPGA_MODE_1WIRE_DIR     0x0100     /* dir=1 -> output */
+#define CONFIG_SYS_FPGA_MODE_SIM_OK_DIR    0x0200
+#define CONFIG_SYS_FPGA_MODE_TESTRIG_FAIL_DIR 0x0400
+#define CONFIG_SYS_FPGA_MODE_1WIRE         0x1000
+#define CONFIG_SYS_FPGA_MODE_SIM_OK        0x2000     /* wired-or net from all devices */
+#define CONFIG_SYS_FPGA_MODE_TESTRIG_FAIL  0x4000
 
 /* FPGA Status Reg */
-#define CFG_FPGA_STATUS_DIP0    0x0001
-#define CFG_FPGA_STATUS_DIP1    0x0002
-#define CFG_FPGA_STATUS_DIP2    0x0004
-#define CFG_FPGA_STATUS_FLASH   0x0008
-#define CFG_FPGA_STATUS_1WIRE   0x1000
-#define CFG_FPGA_STATUS_SIM_OK  0x2000
+#define CONFIG_SYS_FPGA_STATUS_DIP0    0x0001
+#define CONFIG_SYS_FPGA_STATUS_DIP1    0x0002
+#define CONFIG_SYS_FPGA_STATUS_DIP2    0x0004
+#define CONFIG_SYS_FPGA_STATUS_FLASH   0x0008
+#define CONFIG_SYS_FPGA_STATUS_1WIRE   0x1000
+#define CONFIG_SYS_FPGA_STATUS_SIM_OK  0x2000
 
-#define CFG_FPGA_SPARTAN2	1	    /* using Xilinx Spartan 2 now    */
-#define CFG_FPGA_MAX_SIZE	128*1024    /* 128kByte is enough for XC2S30 */
+#define CONFIG_SYS_FPGA_SPARTAN2	1	    /* using Xilinx Spartan 2 now    */
+#define CONFIG_SYS_FPGA_MAX_SIZE	128*1024    /* 128kByte is enough for XC2S30 */
 
 /* FPGA program pin configuration */
-#define CFG_FPGA_PRG		0x04000000  /* FPGA program pin (ppc output) */
-#define CFG_FPGA_CLK		0x02000000  /* FPGA clk pin (ppc output)     */
-#define CFG_FPGA_DATA		0x01000000  /* FPGA data pin (ppc output)    */
-#define CFG_FPGA_INIT		0x00010000  /* FPGA init pin (ppc input)     */
-#define CFG_FPGA_DONE		0x00008000  /* FPGA done pin (ppc input)     */
+#define CONFIG_SYS_FPGA_PRG		0x04000000  /* FPGA program pin (ppc output) */
+#define CONFIG_SYS_FPGA_CLK		0x02000000  /* FPGA clk pin (ppc output)     */
+#define CONFIG_SYS_FPGA_DATA		0x01000000  /* FPGA data pin (ppc output)    */
+#define CONFIG_SYS_FPGA_INIT		0x00010000  /* FPGA init pin (ppc input)     */
+#define CONFIG_SYS_FPGA_DONE		0x00008000  /* FPGA done pin (ppc input)     */
 
 /*-----------------------------------------------------------------------
  * Definitions for initial stack pointer and data area (in data cache)
  */
-#define CFG_INIT_DCACHE_CS	7	/* use cs # 7 for data cache memory    */
+#define CONFIG_SYS_INIT_DCACHE_CS	7	/* use cs # 7 for data cache memory    */
 
-#define CFG_INIT_RAM_ADDR	0x40000000  /* use data cache		       */
-#define CFG_INIT_RAM_END	0x2000	/* End of used area in RAM	       */
-#define CFG_GBL_DATA_SIZE      128  /* size in bytes reserved for initial data */
-#define CFG_GBL_DATA_OFFSET    (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_INIT_RAM_ADDR	0x40000000  /* use data cache		       */
+#define CONFIG_SYS_INIT_RAM_END	0x2000	/* End of used area in RAM	       */
+#define CONFIG_SYS_GBL_DATA_SIZE      128  /* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET    (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
 
 /*
diff --git a/include/configs/CPCI405DT.h b/include/configs/CPCI405DT.h
index c17353920..be8c238a0 100644
--- a/include/configs/CPCI405DT.h
+++ b/include/configs/CPCI405DT.h
@@ -51,8 +51,9 @@
 #define CONFIG_PREBOOT                  /* enable preboot variable      */
 
 #define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
-#define CFG_LOADS_BAUD_CHANGE	1	/* allow baudrate change	*/
+#define CONFIG_SYS_LOADS_BAUD_CHANGE	1	/* allow baudrate change	*/
 
+#define CONFIG_PPC4xx_EMAC
 #define CONFIG_MII		1	/* MII PHY management		*/
 #define CONFIG_PHY_ADDR		0	/* PHY address			*/
 #define CONFIG_LXT971_NO_SLEEP  1       /* disable sleep mode in LXT971 */
@@ -107,45 +108,45 @@
 /*
  * Miscellaneous configurable options
  */
-#define CFG_LONGHELP			/* undef to save memory		*/
-#define CFG_PROMPT	"=> "		/* Monitor Command Prompt	*/
+#define CONFIG_SYS_LONGHELP			/* undef to save memory		*/
+#define CONFIG_SYS_PROMPT	"=> "		/* Monitor Command Prompt	*/
 
-#undef	CFG_HUSH_PARSER			/* use "hush" command parser	*/
-#ifdef	CFG_HUSH_PARSER
-#define CFG_PROMPT_HUSH_PS2	"> "
+#undef	CONFIG_SYS_HUSH_PARSER			/* use "hush" command parser	*/
+#ifdef	CONFIG_SYS_HUSH_PARSER
+#define CONFIG_SYS_PROMPT_HUSH_PS2	"> "
 #endif
 
 #if defined(CONFIG_CMD_KGDB)
-#define CFG_CBSIZE	1024		/* Console I/O Buffer Size	*/
+#define CONFIG_SYS_CBSIZE	1024		/* Console I/O Buffer Size	*/
 #else
-#define CFG_CBSIZE	256		/* Console I/O Buffer Size	*/
+#define CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size	*/
 #endif
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define CFG_MAXARGS	16		/* max number of command args	*/
-#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS	16		/* max number of command args	*/
+#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
 
-#define CFG_DEVICE_NULLDEV	1	/* include nulldev device	*/
+#define CONFIG_SYS_DEVICE_NULLDEV	1	/* include nulldev device	*/
 
-#define CFG_CONSOLE_INFO_QUIET	1	/* don't print console @ startup*/
+#define CONFIG_SYS_CONSOLE_INFO_QUIET	1	/* don't print console @ startup*/
 
 #define CONFIG_AUTO_COMPLETE	1       /* add autocompletion support   */
 
-#define CFG_MEMTEST_START	0x0400000	/* memtest works on	*/
-#define CFG_MEMTEST_END		0x0C00000	/* 4 ... 12 MB in DRAM	*/
+#define CONFIG_SYS_MEMTEST_START	0x0400000	/* memtest works on	*/
+#define CONFIG_SYS_MEMTEST_END		0x0C00000	/* 4 ... 12 MB in DRAM	*/
 
-#undef	CFG_EXT_SERIAL_CLOCK	       /* no external serial clock used */
-#define CFG_IGNORE_405_UART_ERRATA_59	/* ignore ppc405gp errata #59	*/
-#define CFG_BASE_BAUD	    691200
+#undef	CONFIG_SYS_EXT_SERIAL_CLOCK	       /* no external serial clock used */
+#define CONFIG_SYS_IGNORE_405_UART_ERRATA_59	/* ignore ppc405gp errata #59	*/
+#define CONFIG_SYS_BASE_BAUD	    691200
 
 /* The following table includes the supported baudrates */
-#define CFG_BAUDRATE_TABLE	\
+#define CONFIG_SYS_BAUDRATE_TABLE	\
 	{ 300, 600, 1200, 2400, 4800, 9600, 19200, 38400,     \
 	 57600, 115200, 230400, 460800, 921600 }
 
-#define CFG_LOAD_ADDR	0x100000	/* default load address */
-#define CFG_EXTBDINFO	1		/* To use extended board_into (bd_t) */
+#define CONFIG_SYS_LOAD_ADDR	0x100000	/* default load address */
+#define CONFIG_SYS_EXTBDINFO	1		/* To use extended board_into (bd_t) */
 
-#define CFG_HZ		1000		/* decrementer freq: 1 ms ticks */
+#define CONFIG_SYS_HZ		1000		/* decrementer freq: 1 ms ticks */
 
 #define CONFIG_LOOPW            1       /* enable loopw command         */
 
@@ -161,7 +162,7 @@
 
 #define CONFIG_VERSION_VARIABLE 1	/* include version env variable */
 
-#define CFG_RX_ETH_BUFFER	16	/* use 16 rx buffer on 405 emac */
+#define CONFIG_SYS_RX_ETH_BUFFER	16	/* use 16 rx buffer on 405 emac */
 
 /*-----------------------------------------------------------------------
  * PCI stuff
@@ -182,16 +183,16 @@
 
 #define CONFIG_PCI_BOOTDELAY    0       /* enable pci bootdelay variable*/
 
-#define CFG_PCI_SUBSYS_VENDORID 0x12FE  /* PCI Vendor ID: esd gmbh      */
-#define CFG_PCI_SUBSYS_DEVICEID 0x0405  /* PCI Device ID: CPCI-405      */
-#define CFG_PCI_SUBSYS_DEVICEID2 0x0406 /* PCI Device ID: CPCI-405-A    */
-#define CFG_PCI_CLASSCODE       0x0b20  /* PCI Class Code: Processor/PPC*/
-#define CFG_PCI_PTM1LA  (bd->bi_memstart) /* point to sdram               */
-#define CFG_PCI_PTM1MS  (~(bd->bi_memsize - 1) | 1) /* memsize, enable hard-wired to 1 */
-#define CFG_PCI_PTM1PCI 0x00000000      /* Host: use this pci address   */
-#define CFG_PCI_PTM2LA  0xffc00000      /* point to flash               */
-#define CFG_PCI_PTM2MS  0xffc00001      /* 4MB, enable                  */
-#define CFG_PCI_PTM2PCI 0x04000000      /* Host: use this pci address   */
+#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x12FE  /* PCI Vendor ID: esd gmbh      */
+#define CONFIG_SYS_PCI_SUBSYS_DEVICEID 0x0405  /* PCI Device ID: CPCI-405      */
+#define CONFIG_SYS_PCI_SUBSYS_DEVICEID2 0x0406 /* PCI Device ID: CPCI-405-A    */
+#define CONFIG_SYS_PCI_CLASSCODE       0x0b20  /* PCI Class Code: Processor/PPC*/
+#define CONFIG_SYS_PCI_PTM1LA  (bd->bi_memstart) /* point to sdram               */
+#define CONFIG_SYS_PCI_PTM1MS  (~(bd->bi_memsize - 1) | 1) /* memsize, enable hard-wired to 1 */
+#define CONFIG_SYS_PCI_PTM1PCI 0x00000000      /* Host: use this pci address   */
+#define CONFIG_SYS_PCI_PTM2LA  0xffc00000      /* point to flash               */
+#define CONFIG_SYS_PCI_PTM2MS  0xffc00001      /* 4MB, enable                  */
+#define CONFIG_SYS_PCI_PTM2PCI 0x04000000      /* Host: use this pci address   */
 
 /*-----------------------------------------------------------------------
  * IDE/ATA stuff
@@ -201,92 +202,91 @@
 #undef	CONFIG_IDE_LED			/* no led for ide supported	*/
 #define CONFIG_IDE_RESET	1	/* reset for ide supported	*/
 
-#define CFG_IDE_MAXBUS		1		/* max. 1 IDE busses	*/
-#define CFG_IDE_MAXDEVICE	(CFG_IDE_MAXBUS*1) /* max. 1 drives per IDE bus */
+#define CONFIG_SYS_IDE_MAXBUS		1		/* max. 1 IDE busses	*/
+#define CONFIG_SYS_IDE_MAXDEVICE	(CONFIG_SYS_IDE_MAXBUS*1) /* max. 1 drives per IDE bus */
 
-#define CFG_ATA_BASE_ADDR	0xF0100000
-#define CFG_ATA_IDE0_OFFSET	0x0000
+#define CONFIG_SYS_ATA_BASE_ADDR	0xF0100000
+#define CONFIG_SYS_ATA_IDE0_OFFSET	0x0000
 
-#define CFG_ATA_DATA_OFFSET	0x0000	/* Offset for data I/O			*/
-#define CFG_ATA_REG_OFFSET	0x0000	/* Offset for normal register accesses	*/
-#define CFG_ATA_ALT_OFFSET	0x0000	/* Offset for alternate registers	*/
+#define CONFIG_SYS_ATA_DATA_OFFSET	0x0000	/* Offset for data I/O			*/
+#define CONFIG_SYS_ATA_REG_OFFSET	0x0000	/* Offset for normal register accesses	*/
+#define CONFIG_SYS_ATA_ALT_OFFSET	0x0000	/* Offset for alternate registers	*/
 
 /*-----------------------------------------------------------------------
  * Start addresses for the final memory configuration
  * (Set up by the startup code)
- * Please note that CFG_SDRAM_BASE _must_ start at 0
+ * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
  */
-#define CFG_SDRAM_BASE		0x00000000
-#define CFG_FLASH_BASE		0xFFFC0000
-#define CFG_MONITOR_BASE	CFG_FLASH_BASE
-#define CFG_MONITOR_LEN		(256 * 1024)	/* Reserve 256 kB for Monitor	*/
-#define CFG_MALLOC_LEN		(128 * 1024)	/* Reserve 128 kB for malloc()	*/
+#define CONFIG_SYS_SDRAM_BASE		0x00000000
+#define CONFIG_SYS_FLASH_BASE		0xFFFC0000
+#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_FLASH_BASE
+#define CONFIG_SYS_MONITOR_LEN		(256 * 1024)	/* Reserve 256 kB for Monitor	*/
+#define CONFIG_SYS_MALLOC_LEN		(128 * 1024)	/* Reserve 128 kB for malloc()	*/
 
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
+#define CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
 /*-----------------------------------------------------------------------
  * FLASH organization
  */
-#define CFG_MAX_FLASH_BANKS	2	/* max number of memory banks		*/
-#define CFG_MAX_FLASH_SECT	256	/* max number of sectors on one chip	*/
+#define CONFIG_SYS_MAX_FLASH_BANKS	2	/* max number of memory banks		*/
+#define CONFIG_SYS_MAX_FLASH_SECT	256	/* max number of sectors on one chip	*/
 
-#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
-#define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
+#define CONFIG_SYS_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
+#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
 
-#define CFG_FLASH_WORD_SIZE	unsigned short	/* flash word size (width)	*/
-#define CFG_FLASH_ADDR0		0x5555	/* 1st address for flash config cycles	*/
-#define CFG_FLASH_ADDR1		0x2AAA	/* 2nd address for flash config cycles	*/
+#define CONFIG_SYS_FLASH_WORD_SIZE	unsigned short	/* flash word size (width)	*/
+#define CONFIG_SYS_FLASH_ADDR0		0x5555	/* 1st address for flash config cycles	*/
+#define CONFIG_SYS_FLASH_ADDR1		0x2AAA	/* 2nd address for flash config cycles	*/
 /*
  * The following defines are added for buggy IOP480 byte interface.
  * All other boards should use the standard values (CPCI405 etc.)
  */
-#define CFG_FLASH_READ0		0x0000	/* 0 is standard			*/
-#define CFG_FLASH_READ1		0x0001	/* 1 is standard			*/
-#define CFG_FLASH_READ2		0x0002	/* 2 is standard			*/
+#define CONFIG_SYS_FLASH_READ0		0x0000	/* 0 is standard			*/
+#define CONFIG_SYS_FLASH_READ1		0x0001	/* 1 is standard			*/
+#define CONFIG_SYS_FLASH_READ2		0x0002	/* 2 is standard			*/
 
-#define CFG_FLASH_EMPTY_INFO		/* print 'E' for empty sector on flinfo */
+#define CONFIG_SYS_FLASH_EMPTY_INFO		/* print 'E' for empty sector on flinfo */
 
 #if 0 /* Use NVRAM for environment variables */
 /*-----------------------------------------------------------------------
  * NVRAM organization
  */
-#define CFG_ENV_IS_IN_NVRAM	1	/* use NVRAM for environment vars	*/
-#define CFG_ENV_SIZE		0x0ff8		/* Size of Environment vars	*/
-#define CFG_ENV_ADDR		\
-	(CFG_NVRAM_BASE_ADDR+CFG_NVRAM_SIZE-(CFG_ENV_SIZE+8))	/* Env	*/
+#define CONFIG_ENV_IS_IN_NVRAM	1	/* use NVRAM for environment vars	*/
+#define CONFIG_ENV_SIZE		0x0ff8		/* Size of Environment vars	*/
+#define CONFIG_ENV_ADDR		\
+	(CONFIG_SYS_NVRAM_BASE_ADDR+CONFIG_SYS_NVRAM_SIZE-(CONFIG_ENV_SIZE+8))	/* Env	*/
 
 #else /* Use EEPROM for environment variables */
 
-#define CFG_ENV_IS_IN_EEPROM	1	/* use EEPROM for environment vars */
-#define CFG_ENV_OFFSET		0x000	/* environment starts at the beginning of the EEPROM */
-#define CFG_ENV_SIZE		0x800	/* 2048 bytes may be used for env vars*/
+#define CONFIG_ENV_IS_IN_EEPROM	1	/* use EEPROM for environment vars */
+#define CONFIG_ENV_OFFSET		0x000	/* environment starts at the beginning of the EEPROM */
+#define CONFIG_ENV_SIZE		0x800	/* 2048 bytes may be used for env vars*/
 				   /* total size of a CAT24WC16 is 2048 bytes */
 #endif
 
-#define CFG_NVRAM_BASE_ADDR	0xf0200000		/* NVRAM base address	*/
-#define CFG_NVRAM_SIZE		(32*1024)		/* NVRAM size		*/
-#define CFG_VXWORKS_MAC_PTR     (CFG_NVRAM_BASE_ADDR+0x6900) /* VxWorks eth-addr*/
+#define CONFIG_SYS_NVRAM_BASE_ADDR	0xf0200000		/* NVRAM base address	*/
+#define CONFIG_SYS_NVRAM_SIZE		(32*1024)		/* NVRAM size		*/
+#define CONFIG_SYS_VXWORKS_MAC_PTR     (CONFIG_SYS_NVRAM_BASE_ADDR+0x6900) /* VxWorks eth-addr*/
 
 /*-----------------------------------------------------------------------
  * I2C EEPROM (CAT24WC16) for environment
  */
 #define CONFIG_HARD_I2C			/* I2c with hardware support */
-#define CFG_I2C_SPEED		400000	/* I2C speed and slave address */
-#define CFG_I2C_SLAVE		0x7F
+#define CONFIG_SYS_I2C_SPEED		400000	/* I2C speed and slave address */
+#define CONFIG_SYS_I2C_SLAVE		0x7F
 
-#define CFG_I2C_EEPROM_ADDR	0x50	/* EEPROM CAT28WC08		*/
-#define CFG_I2C_EEPROM_ADDR_LEN 1	/* Bytes of address		*/
+#define CONFIG_SYS_I2C_EEPROM_ADDR	0x50	/* EEPROM CAT28WC08		*/
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1	/* Bytes of address		*/
 /* mask of address bits that overflow into the "EEPROM chip address"	*/
-#define CFG_I2C_EEPROM_ADDR_OVERFLOW	0x07
-#define CFG_EEPROM_PAGE_WRITE_BITS 4	/* The Catalyst CAT24WC08 has	*/
+#define CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW	0x07
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 4	/* The Catalyst CAT24WC08 has	*/
 					/* 16 byte page write mode using*/
 					/* last 4 bits of the address	*/
-#define CFG_EEPROM_PAGE_WRITE_DELAY_MS	10   /* and takes up to 10 msec */
-#define CFG_EEPROM_PAGE_WRITE_ENABLE
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	10   /* and takes up to 10 msec */
 
 /*
  * Init Memory Controller:
@@ -302,88 +302,88 @@
  */
 
 /* Memory Bank 0 (Flash Bank 0) initialization					*/
-#define CFG_EBC_PB0AP		0x92015480
-#define CFG_EBC_PB0CR		0xFFC5A000  /* BAS=0xFFC,BS=4MB,BU=R/W,BW=16bit */
+#define CONFIG_SYS_EBC_PB0AP		0x92015480
+#define CONFIG_SYS_EBC_PB0CR		0xFFC5A000  /* BAS=0xFFC,BS=4MB,BU=R/W,BW=16bit */
 
 /* Memory Bank 1 (Flash Bank 1) initialization					*/
-#define CFG_EBC_PB1AP		0x92015480
-#define CFG_EBC_PB1CR		0xFF85A000  /* BAS=0xFF8,BS=4MB,BU=R/W,BW=16bit */
+#define CONFIG_SYS_EBC_PB1AP		0x92015480
+#define CONFIG_SYS_EBC_PB1CR		0xFF85A000  /* BAS=0xFF8,BS=4MB,BU=R/W,BW=16bit */
 
 /* Memory Bank 2 (CAN0, 1) initialization					*/
-#define CFG_EBC_PB2AP		0x010053C0  /* BWT=2,WBN=1,WBF=1,TH=1,RE=1,SOR=1,BEM=1 */
-#define CFG_EBC_PB2CR		0xF0018000  /* BAS=0xF00,BS=1MB,BU=R/W,BW=8bit	*/
-#define CFG_LED_ADDR		0xF0000380
+#define CONFIG_SYS_EBC_PB2AP		0x010053C0  /* BWT=2,WBN=1,WBF=1,TH=1,RE=1,SOR=1,BEM=1 */
+#define CONFIG_SYS_EBC_PB2CR		0xF0018000  /* BAS=0xF00,BS=1MB,BU=R/W,BW=8bit	*/
+#define CONFIG_SYS_LED_ADDR		0xF0000380
 
 /* Memory Bank 3 (CompactFlash IDE) initialization				*/
-#define CFG_EBC_PB3AP		0x010053C0  /* BWT=2,WBN=1,WBF=1,TH=1,RE=1,SOR=1,BEM=1 */
-#define CFG_EBC_PB3CR		0xF011A000  /* BAS=0xF01,BS=1MB,BU=R/W,BW=16bit */
+#define CONFIG_SYS_EBC_PB3AP		0x010053C0  /* BWT=2,WBN=1,WBF=1,TH=1,RE=1,SOR=1,BEM=1 */
+#define CONFIG_SYS_EBC_PB3CR		0xF011A000  /* BAS=0xF01,BS=1MB,BU=R/W,BW=16bit */
 
 /* Memory Bank 4 (NVRAM/RTC) initialization					*/
-/*#define CFG_EBC_PB4AP		  0x01805280  / * TWT=3,WBN=1,WBF=1,TH=1,SOR=1	   */
-#define CFG_EBC_PB4AP		0x01805680  /* TWT=3,WBN=1,WBF=1,TH=3,SOR=1	*/
-#define CFG_EBC_PB4CR		0xF0218000  /* BAS=0xF02,BS=1MB,BU=R/W,BW=8bit	*/
+/*#define CONFIG_SYS_EBC_PB4AP		  0x01805280  / * TWT=3,WBN=1,WBF=1,TH=1,SOR=1	   */
+#define CONFIG_SYS_EBC_PB4AP		0x01805680  /* TWT=3,WBN=1,WBF=1,TH=3,SOR=1	*/
+#define CONFIG_SYS_EBC_PB4CR		0xF0218000  /* BAS=0xF02,BS=1MB,BU=R/W,BW=8bit	*/
 
 /* Memory Bank 5 (optional Quart) initialization				*/
-#define CFG_EBC_PB5AP		0x04005B80  /* TWT=8,WBN=1,WBF=1,TH=5,RE=1,SOR=1*/
-#define CFG_EBC_PB5CR		0xF0318000  /* BAS=0xF03,BS=1MB,BU=R/W,BW=8bit	*/
+#define CONFIG_SYS_EBC_PB5AP		0x04005B80  /* TWT=8,WBN=1,WBF=1,TH=5,RE=1,SOR=1*/
+#define CONFIG_SYS_EBC_PB5CR		0xF0318000  /* BAS=0xF03,BS=1MB,BU=R/W,BW=8bit	*/
 
 /* Memory Bank 6 (FPGA internal) initialization					*/
-#define CFG_EBC_PB6AP		0x010053C0  /* BWT=2,WBN=1,WBF=1,TH=1,RE=1,SOR=1,BEM=1 */
-#define CFG_EBC_PB6CR		0xF041A000  /* BAS=0xF01,BS=1MB,BU=R/W,BW=16bit */
-#define CFG_FPGA_BASE_ADDR	0xF0400000
+#define CONFIG_SYS_EBC_PB6AP		0x010053C0  /* BWT=2,WBN=1,WBF=1,TH=1,RE=1,SOR=1,BEM=1 */
+#define CONFIG_SYS_EBC_PB6CR		0xF041A000  /* BAS=0xF01,BS=1MB,BU=R/W,BW=16bit */
+#define CONFIG_SYS_FPGA_BASE_ADDR	0xF0400000
 
 /*-----------------------------------------------------------------------
  * FPGA stuff
  */
 /* FPGA internal regs */
-#define CFG_FPGA_MODE		0x00
-#define CFG_FPGA_STATUS		0x02
-#define CFG_FPGA_TS		0x04
-#define CFG_FPGA_TS_LOW		0x06
-#define CFG_FPGA_TS_CAP0	0x10
-#define CFG_FPGA_TS_CAP0_LOW	0x12
-#define CFG_FPGA_TS_CAP1	0x14
-#define CFG_FPGA_TS_CAP1_LOW	0x16
-#define CFG_FPGA_TS_CAP2	0x18
-#define CFG_FPGA_TS_CAP2_LOW	0x1a
-#define CFG_FPGA_TS_CAP3	0x1c
-#define CFG_FPGA_TS_CAP3_LOW	0x1e
+#define CONFIG_SYS_FPGA_MODE		0x00
+#define CONFIG_SYS_FPGA_STATUS		0x02
+#define CONFIG_SYS_FPGA_TS		0x04
+#define CONFIG_SYS_FPGA_TS_LOW		0x06
+#define CONFIG_SYS_FPGA_TS_CAP0	0x10
+#define CONFIG_SYS_FPGA_TS_CAP0_LOW	0x12
+#define CONFIG_SYS_FPGA_TS_CAP1	0x14
+#define CONFIG_SYS_FPGA_TS_CAP1_LOW	0x16
+#define CONFIG_SYS_FPGA_TS_CAP2	0x18
+#define CONFIG_SYS_FPGA_TS_CAP2_LOW	0x1a
+#define CONFIG_SYS_FPGA_TS_CAP3	0x1c
+#define CONFIG_SYS_FPGA_TS_CAP3_LOW	0x1e
 
 /* FPGA Mode Reg */
-#define CFG_FPGA_MODE_CF_RESET	    0x0001
-#define CFG_FPGA_MODE_DUART_RESET   0x0002
-#define CFG_FPGA_MODE_ENABLE_OUTPUT 0x0004     /* only set on CPCI-405 Ver 3 */
-#define CFG_FPGA_MODE_TS_IRQ_ENABLE 0x0100
-#define CFG_FPGA_MODE_TS_IRQ_CLEAR  0x1000
-#define CFG_FPGA_MODE_TS_CLEAR	    0x2000
+#define CONFIG_SYS_FPGA_MODE_CF_RESET	    0x0001
+#define CONFIG_SYS_FPGA_MODE_DUART_RESET   0x0002
+#define CONFIG_SYS_FPGA_MODE_ENABLE_OUTPUT 0x0004     /* only set on CPCI-405 Ver 3 */
+#define CONFIG_SYS_FPGA_MODE_TS_IRQ_ENABLE 0x0100
+#define CONFIG_SYS_FPGA_MODE_TS_IRQ_CLEAR  0x1000
+#define CONFIG_SYS_FPGA_MODE_TS_CLEAR	    0x2000
 
 /* FPGA Status Reg */
-#define CFG_FPGA_STATUS_DIP0	0x0001
-#define CFG_FPGA_STATUS_DIP1	0x0002
-#define CFG_FPGA_STATUS_DIP2	0x0004
-#define CFG_FPGA_STATUS_FLASH	0x0008
-#define CFG_FPGA_STATUS_TS_IRQ	0x1000
+#define CONFIG_SYS_FPGA_STATUS_DIP0	0x0001
+#define CONFIG_SYS_FPGA_STATUS_DIP1	0x0002
+#define CONFIG_SYS_FPGA_STATUS_DIP2	0x0004
+#define CONFIG_SYS_FPGA_STATUS_FLASH	0x0008
+#define CONFIG_SYS_FPGA_STATUS_TS_IRQ	0x1000
 
-#define CFG_FPGA_SPARTAN2	1	    /* using Xilinx Spartan 2 now    */
-#define CFG_FPGA_MAX_SIZE	32*1024	    /* 32kByte is enough for XC2S15  */
+#define CONFIG_SYS_FPGA_SPARTAN2	1	    /* using Xilinx Spartan 2 now    */
+#define CONFIG_SYS_FPGA_MAX_SIZE	32*1024	    /* 32kByte is enough for XC2S15  */
 
 /* FPGA program pin configuration */
-#define CFG_FPGA_PRG		0x04000000  /* FPGA program pin (ppc output) */
-#define CFG_FPGA_CLK		0x02000000  /* FPGA clk pin (ppc output)     */
-#define CFG_FPGA_DATA		0x01000000  /* FPGA data pin (ppc output)    */
-#define CFG_FPGA_INIT		0x00010000  /* FPGA init pin (ppc input)     */
-#define CFG_FPGA_DONE		0x00008000  /* FPGA done pin (ppc input)     */
+#define CONFIG_SYS_FPGA_PRG		0x04000000  /* FPGA program pin (ppc output) */
+#define CONFIG_SYS_FPGA_CLK		0x02000000  /* FPGA clk pin (ppc output)     */
+#define CONFIG_SYS_FPGA_DATA		0x01000000  /* FPGA data pin (ppc output)    */
+#define CONFIG_SYS_FPGA_INIT		0x00010000  /* FPGA init pin (ppc input)     */
+#define CONFIG_SYS_FPGA_DONE		0x00008000  /* FPGA done pin (ppc input)     */
 
 /*-----------------------------------------------------------------------
  * Definitions for initial stack pointer and data area (in data cache)
  */
-#define CFG_INIT_DCACHE_CS	7	/* use cs # 7 for data cache memory    */
+#define CONFIG_SYS_INIT_DCACHE_CS	7	/* use cs # 7 for data cache memory    */
 
-#define CFG_INIT_RAM_ADDR	0x40000000  /* use data cache		       */
-#define CFG_INIT_RAM_END	0x2000	/* End of used area in RAM	       */
-#define CFG_GBL_DATA_SIZE      128  /* size in bytes reserved for initial data */
-#define CFG_GBL_DATA_OFFSET    (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_INIT_RAM_ADDR	0x40000000  /* use data cache		       */
+#define CONFIG_SYS_INIT_RAM_END	0x2000	/* End of used area in RAM	       */
+#define CONFIG_SYS_GBL_DATA_SIZE      128  /* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET    (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
 /*
  * Internal Definitions
diff --git a/include/configs/CPCI750.h b/include/configs/CPCI750.h
index 03756c3b2..8494faac2 100644
--- a/include/configs/CPCI750.h
+++ b/include/configs/CPCI750.h
@@ -68,18 +68,18 @@
 #define CONFIG_BOARD_PRE_INIT
 #define CONFIG_BOARD_EARLY_INIT_F 1
 
-#define CFG_BOARD_NAME		"CPCI750"
+#define CONFIG_SYS_BOARD_NAME		"CPCI750"
 #define CONFIG_IDENT_STRING	"Marvell 64360 + IBM750FX"
 
-/*#define CFG_HUSH_PARSER*/
-#define CFG_HUSH_PARSER
+/*#define CONFIG_SYS_HUSH_PARSER*/
+#define CONFIG_SYS_HUSH_PARSER
 
-#define CFG_PROMPT_HUSH_PS2	"> "
+#define CONFIG_SYS_PROMPT_HUSH_PS2	"> "
 
 #define CONFIG_AUTO_COMPLETE 1
 
 /* Define which ETH port will be used for connecting the network */
-#define CFG_ETH_PORT		ETH_0
+#define CONFIG_SYS_ETH_PORT		ETH_0
 
 /*
  * The following defines let you select what serial you want to use
@@ -87,7 +87,7 @@
  *
  * what to do:
  * to use the DUART, undef CONFIG_MPSC.	 If you have hacked a serial
- * cable onto the second DUART channel, change the CFG_DUART port from 1
+ * cable onto the second DUART channel, change the CONFIG_SYS_DUART port from 1
  * to 0 below.
  *
  * to use the MPSC, #define CONFIG_MPSC.  If you have wired up another
@@ -130,7 +130,7 @@
 
 
 #define CONFIG_LOADS_ECHO	0	/* echo off for serial download */
-#define CFG_LOADS_BAUD_CHANGE		/* allow baudrate changes	*/
+#define CONFIG_SYS_LOADS_BAUD_CHANGE		/* allow baudrate changes	*/
 
 #undef	CONFIG_WATCHDOG			/* watchdog disabled		*/
 #undef	CONFIG_ALTIVEC			/* undef to disable		*/
@@ -175,75 +175,75 @@
 #define CONFIG_VIDEO_SW_CURSOR
 #define CONFIG_VIDEO_LOGO
 #define CONFIG_I8042_KBD
-#define CFG_ISA_IO 0
+#define CONFIG_SYS_ISA_IO 0
 #endif
 
 /*
  * Miscellaneous configurable options
  */
-#define CFG_I2C_EEPROM_ADDR_LEN 2
-#define CFG_I2C_MULTI_EEPROMS
-#define CFG_I2C_SPEED	80000		/* I2C speed default */
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
+#define CONFIG_SYS_I2C_MULTI_EEPROMS
+#define CONFIG_SYS_I2C_SPEED	80000		/* I2C speed default */
 
-#define CFG_GT_DUAL_CPU			/* also for JTAG even with one cpu */
-#define CFG_LONGHELP			/* undef to save memory		*/
-#define CFG_PROMPT	"=> "		/* Monitor Command Prompt	*/
+#define CONFIG_SYS_GT_DUAL_CPU			/* also for JTAG even with one cpu */
+#define CONFIG_SYS_LONGHELP			/* undef to save memory		*/
+#define CONFIG_SYS_PROMPT	"=> "		/* Monitor Command Prompt	*/
 #if defined(CONFIG_CMD_KGDB)
-#define CFG_CBSIZE	1024		/* Console I/O Buffer Size	*/
+#define CONFIG_SYS_CBSIZE	1024		/* Console I/O Buffer Size	*/
 #else
-#define CFG_CBSIZE	256		/* Console I/O Buffer Size	*/
+#define CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size	*/
 #endif
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define CFG_MAXARGS	16		/* max number of command args	*/
-#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS	16		/* max number of command args	*/
+#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
 
-/*#define CFG_MEMTEST_START	0x00400000*/	/* memtest works on	*/
-/*#define CFG_MEMTEST_END		0x00C00000*/	/* 4 ... 12 MB in DRAM	*/
-/*#define CFG_MEMTEST_END		0x07c00000*/	/* 4 ... 124 MB in DRAM */
+/*#define CONFIG_SYS_MEMTEST_START	0x00400000*/	/* memtest works on	*/
+/*#define CONFIG_SYS_MEMTEST_END		0x00C00000*/	/* 4 ... 12 MB in DRAM	*/
+/*#define CONFIG_SYS_MEMTEST_END		0x07c00000*/	/* 4 ... 124 MB in DRAM */
 
 /*
-#define CFG_DRAM_TEST
+#define CONFIG_SYS_DRAM_TEST
  * DRAM tests
- *   CFG_DRAM_TEST - enables the following tests.
+ *   CONFIG_SYS_DRAM_TEST - enables the following tests.
  *
- *   CFG_DRAM_TEST_DATA - Enables test for shorted or open data lines
+ *   CONFIG_SYS_DRAM_TEST_DATA - Enables test for shorted or open data lines
  *			  Environment variable 'test_dram_data' must be
  *			  set to 'y'.
- *   CFG_DRAM_TEST_DATA - Enables test to verify that each word is uniquely
+ *   CONFIG_SYS_DRAM_TEST_DATA - Enables test to verify that each word is uniquely
  *			  addressable. Environment variable
  *			  'test_dram_address' must be set to 'y'.
- *   CFG_DRAM_TEST_WALK - Enables test a 64-bit walking ones pattern test.
+ *   CONFIG_SYS_DRAM_TEST_WALK - Enables test a 64-bit walking ones pattern test.
  *			  This test takes about 6 minutes to test 64 MB.
  *			  Environment variable 'test_dram_walk' must be
  *			  set to 'y'.
  */
-#define CFG_DRAM_TEST
-#if defined(CFG_DRAM_TEST)
-#define CFG_MEMTEST_START		0x00400000	/* memtest works on	*/
-/*#define CFG_MEMTEST_END		0x00C00000*/	/* 4 ... 12 MB in DRAM	*/
-#define CFG_MEMTEST_END		0x07c00000	/* 4 ... 124 MB in DRAM */
-#define CFG_DRAM_TEST_DATA
-#define CFG_DRAM_TEST_ADDRESS
-#define CFG_DRAM_TEST_WALK
-#endif /* CFG_DRAM_TEST */
+#define CONFIG_SYS_DRAM_TEST
+#if defined(CONFIG_SYS_DRAM_TEST)
+#define CONFIG_SYS_MEMTEST_START		0x00400000	/* memtest works on	*/
+/*#define CONFIG_SYS_MEMTEST_END		0x00C00000*/	/* 4 ... 12 MB in DRAM	*/
+#define CONFIG_SYS_MEMTEST_END		0x07c00000	/* 4 ... 124 MB in DRAM */
+#define CONFIG_SYS_DRAM_TEST_DATA
+#define CONFIG_SYS_DRAM_TEST_ADDRESS
+#define CONFIG_SYS_DRAM_TEST_WALK
+#endif /* CONFIG_SYS_DRAM_TEST */
 
 #define CONFIG_DISPLAY_MEMMAP		/* at the end of the bootprocess show the memory map */
-#undef CFG_DISPLAY_DIMM_SPD_CONTENT	/* show SPD content during boot */
+#undef CONFIG_SYS_DISPLAY_DIMM_SPD_CONTENT	/* show SPD content during boot */
 
-#define CFG_LOAD_ADDR		0x00300000	/* default load address */
+#define CONFIG_SYS_LOAD_ADDR		0x00300000	/* default load address */
 
-#define CFG_HZ			1000		/* decr freq: 1ms ticks */
-#define CFG_BUS_HZ		133000000	/* 133 MHz (CPU = 5*Bus = 666MHz)		*/
-#define CFG_BUS_CLK		CFG_BUS_HZ
+#define CONFIG_SYS_HZ			1000		/* decr freq: 1ms ticks */
+#define CONFIG_SYS_BUS_HZ		133000000	/* 133 MHz (CPU = 5*Bus = 666MHz)		*/
+#define CONFIG_SYS_BUS_CLK		CONFIG_SYS_BUS_HZ
 
-#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
 
-#define CFG_TCLK		133000000
+#define CONFIG_SYS_TCLK		133000000
 
-/*#define CFG_750FX_HID0		0x8000c084*/
-#define CFG_750FX_HID0		0x80008484
-#define CFG_750FX_HID1		0x54800000
-#define CFG_750FX_HID2		0x00000000
+/*#define CONFIG_SYS_750FX_HID0		0x8000c084*/
+#define CONFIG_SYS_750FX_HID0		0x80008484
+#define CONFIG_SYS_750FX_HID1		0x54800000
+#define CONFIG_SYS_750FX_HID2		0x00000000
 
 /*
  * Low Level Configuration Settings
@@ -256,63 +256,63 @@
  */
 
  /*
- * When locking data in cache you should point the CFG_INIT_RAM_ADDRESS
+ * When locking data in cache you should point the CONFIG_SYS_INIT_RAM_ADDRESS
  * To an unused memory region. The stack will remain in cache until RAM
  * is initialized
 */
-#undef	  CFG_INIT_RAM_LOCK
-/* #define CFG_INIT_RAM_ADDR	0x40000000*/ /* unused memory region */
-/* #define CFG_INIT_RAM_ADDR	0xfba00000*/ /* unused memory region */
-#define CFG_INIT_RAM_ADDR	0xf1080000 /* unused memory region */
-#define CFG_INIT_RAM_END	0x1000
-#define CFG_GBL_DATA_SIZE	128  /* size in bytes reserved for init data */
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#undef	  CONFIG_SYS_INIT_RAM_LOCK
+/* #define CONFIG_SYS_INIT_RAM_ADDR	0x40000000*/ /* unused memory region */
+/* #define CONFIG_SYS_INIT_RAM_ADDR	0xfba00000*/ /* unused memory region */
+#define CONFIG_SYS_INIT_RAM_ADDR	0xf1080000 /* unused memory region */
+#define CONFIG_SYS_INIT_RAM_END	0x1000
+#define CONFIG_SYS_GBL_DATA_SIZE	128  /* size in bytes reserved for init data */
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
 
 #define RELOCATE_INTERNAL_RAM_ADDR
 #ifdef RELOCATE_INTERNAL_RAM_ADDR
-/*#define CFG_INTERNAL_RAM_ADDR 0xfba00000*/
-#define CFG_INTERNAL_RAM_ADDR	0xf1080000
+/*#define CONFIG_SYS_INTERNAL_RAM_ADDR 0xfba00000*/
+#define CONFIG_SYS_INTERNAL_RAM_ADDR	0xf1080000
 #endif
 
 /*-----------------------------------------------------------------------
  * Start addresses for the final memory configuration
  * (Set up by the startup code)
- * Please note that CFG_SDRAM_BASE _must_ start at 0
+ * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
  */
-#define CFG_SDRAM_BASE		0x00000000
+#define CONFIG_SYS_SDRAM_BASE		0x00000000
 /* Dummies for BAT 4-7 */
-#define CFG_SDRAM1_BASE		0x10000000	/* each 256 MByte */
-#define CFG_SDRAM2_BASE		0x20000000
-#define CFG_SDRAM3_BASE		0x30000000
-#define CFG_SDRAM4_BASE		0x40000000
-#define CFG_RESET_ADDRESS	0xfff00100
-#define CFG_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor */
-#define CFG_MONITOR_BASE	0xfff00000
-#define CFG_MALLOC_LEN		(128 << 10)	/* Reserve 256 kB for malloc */
+#define CONFIG_SYS_SDRAM1_BASE		0x10000000	/* each 256 MByte */
+#define CONFIG_SYS_SDRAM2_BASE		0x20000000
+#define CONFIG_SYS_SDRAM3_BASE		0x30000000
+#define CONFIG_SYS_SDRAM4_BASE		0x40000000
+#define CONFIG_SYS_RESET_ADDRESS	0xfff00100
+#define CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor */
+#define CONFIG_SYS_MONITOR_BASE	0xfff00000
+#define CONFIG_SYS_MALLOC_LEN		(128 << 10)	/* Reserve 256 kB for malloc */
 
 /*-----------------------------------------------------------------------
  * FLASH related
  *----------------------------------------------------------------------*/
 
 #define CONFIG_FLASH_CFI_DRIVER
-#define CFG_FLASH_CFI		1	   /* Flash is CFI conformant		*/
-#define CFG_FLASH_PROTECTION	1	   /* use hardware protection		*/
-#define CFG_FLASH_USE_BUFFER_WRITE 1	   /* use buffered writes (20x faster)	*/
-#define CFG_FLASH_BASE		0xfc000000 /* start of flash banks		*/
-#define CFG_MAX_FLASH_BANKS	4	   /* max number of memory banks	*/
-#define CFG_FLASH_INCREMENT	0x01000000 /* size of  flash bank		*/
-#define CFG_MAX_FLASH_SECT	128	   /* max number of sectors on one chip */
-#define CFG_FLASH_BANKS_LIST  { CFG_FLASH_BASE,				   \
-				CFG_FLASH_BASE + 1*CFG_FLASH_INCREMENT,	   \
-				CFG_FLASH_BASE + 2*CFG_FLASH_INCREMENT,	   \
-				CFG_FLASH_BASE + 3*CFG_FLASH_INCREMENT }
-#define CFG_FLASH_EMPTY_INFO	1	   /* show if bank is empty		*/
+#define CONFIG_SYS_FLASH_CFI		1	   /* Flash is CFI conformant		*/
+#define CONFIG_SYS_FLASH_PROTECTION	1	   /* use hardware protection		*/
+#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1	   /* use buffered writes (20x faster)	*/
+#define CONFIG_SYS_FLASH_BASE		0xfc000000 /* start of flash banks		*/
+#define CONFIG_SYS_MAX_FLASH_BANKS	4	   /* max number of memory banks	*/
+#define CONFIG_SYS_FLASH_INCREMENT	0x01000000 /* size of  flash bank		*/
+#define CONFIG_SYS_MAX_FLASH_SECT	128	   /* max number of sectors on one chip */
+#define CONFIG_SYS_FLASH_BANKS_LIST  { CONFIG_SYS_FLASH_BASE,				   \
+				CONFIG_SYS_FLASH_BASE + 1*CONFIG_SYS_FLASH_INCREMENT,	   \
+				CONFIG_SYS_FLASH_BASE + 2*CONFIG_SYS_FLASH_INCREMENT,	   \
+				CONFIG_SYS_FLASH_BASE + 3*CONFIG_SYS_FLASH_INCREMENT }
+#define CONFIG_SYS_FLASH_EMPTY_INFO	1	   /* show if bank is empty		*/
 
 /* areas to map different things with the GT in physical space */
-#define CFG_DRAM_BANKS		4
+#define CONFIG_SYS_DRAM_BANKS		4
 
 /* What to put in the bats. */
-#define CFG_MISC_REGION_BASE	0xf0000000
+#define CONFIG_SYS_MISC_REGION_BASE	0xf0000000
 
 /* Peripheral Device section */
 
@@ -326,37 +326,37 @@
 /* Data flash on external device module		       */
 /* Boot flash on external device module		       */
 /*******************************************************/
-#define CFG_DFL_GT_REGS		0x14000000				/* boot time GT_REGS */
-#define	 CFG_CPCI750_RESET_ADDR 0x14000000				/* After power on Reset the CPCI750 is here */
+#define CONFIG_SYS_DFL_GT_REGS		0x14000000				/* boot time GT_REGS */
+#define	 CONFIG_SYS_CPCI750_RESET_ADDR 0x14000000				/* After power on Reset the CPCI750 is here */
 
 #undef	MARVEL_STANDARD_CFG
 #ifndef		MARVEL_STANDARD_CFG
 /*++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++*/
-#define CFG_GT_REGS		0xf1000000				/* GT Registers will be mapped here */
-/*#define CFG_DEV_BASE		0xfc000000*/				/* GT Devices CS start here */
-#define CFG_INT_SRAM_BASE	0xf1080000				/* GT offers 256k internal fast SRAM */
-
-#define CFG_BOOT_SPACE		0xff000000				/* BOOT_CS0 flash 0    */
-#define CFG_DEV0_SPACE		0xfc000000				/* DEV_CS0 flash 1     */
-#define CFG_DEV1_SPACE		0xfd000000				/* DEV_CS1 flash 2     */
-#define CFG_DEV2_SPACE		0xfe000000				/* DEV_CS2 flash 3     */
-#define CFG_DEV3_SPACE		0xf0000000				/* DEV_CS3 nvram/can   */
-
-#define CFG_BOOT_SIZE		_16M					/* cpci750 flash 0     */
-#define CFG_DEV0_SIZE		_16M					/* cpci750 flash 1     */
-#define CFG_DEV1_SIZE		_16M					/* cpci750 flash 2     */
-#define CFG_DEV2_SIZE		_16M					/* cpci750 flash 3     */
-#define CFG_DEV3_SIZE		_16M					/* cpci750 nvram/can   */
+#define CONFIG_SYS_GT_REGS		0xf1000000				/* GT Registers will be mapped here */
+/*#define CONFIG_SYS_DEV_BASE		0xfc000000*/				/* GT Devices CS start here */
+#define CONFIG_SYS_INT_SRAM_BASE	0xf1080000				/* GT offers 256k internal fast SRAM */
+
+#define CONFIG_SYS_BOOT_SPACE		0xff000000				/* BOOT_CS0 flash 0    */
+#define CONFIG_SYS_DEV0_SPACE		0xfc000000				/* DEV_CS0 flash 1     */
+#define CONFIG_SYS_DEV1_SPACE		0xfd000000				/* DEV_CS1 flash 2     */
+#define CONFIG_SYS_DEV2_SPACE		0xfe000000				/* DEV_CS2 flash 3     */
+#define CONFIG_SYS_DEV3_SPACE		0xf0000000				/* DEV_CS3 nvram/can   */
+
+#define CONFIG_SYS_BOOT_SIZE		_16M					/* cpci750 flash 0     */
+#define CONFIG_SYS_DEV0_SIZE		_16M					/* cpci750 flash 1     */
+#define CONFIG_SYS_DEV1_SIZE		_16M					/* cpci750 flash 2     */
+#define CONFIG_SYS_DEV2_SIZE		_16M					/* cpci750 flash 3     */
+#define CONFIG_SYS_DEV3_SIZE		_16M					/* cpci750 nvram/can   */
 
 /*++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++*/
 #endif
 
 /* Reset values for Port behavior (8bit/ 32bit, etc.) only corrected by device width */
-#define CFG_DEV0_PAR		0x8FDFFFFF				/* 16 bit flash */
-#define CFG_DEV1_PAR		0x8FDFFFFF				/* 16 bit flash */
-#define CFG_DEV2_PAR		0x8FDFFFFF				/* 16 bit flash */
-#define CFG_DEV3_PAR		0x8FCFFFFF				/* nvram/can	*/
-#define CFG_BOOT_PAR		0x8FDFFFFF				/* 16 bit flash */
+#define CONFIG_SYS_DEV0_PAR		0x8FDFFFFF				/* 16 bit flash */
+#define CONFIG_SYS_DEV1_PAR		0x8FDFFFFF				/* 16 bit flash */
+#define CONFIG_SYS_DEV2_PAR		0x8FDFFFFF				/* 16 bit flash */
+#define CONFIG_SYS_DEV3_PAR		0x8FCFFFFF				/* nvram/can	*/
+#define CONFIG_SYS_BOOT_PAR		0x8FDFFFFF				/* 16 bit flash */
 
 	/*   c	  4    a      8	    2	  4    1      c		*/
 	/* 33 22|2222|22 22|111 1|11 11|1 1  |	  |		*/
@@ -366,18 +366,18 @@
 
 
 /* MPP Control MV64360 Appendix P P. 632*/
-#define CFG_MPP_CONTROL_0	0x00002222	/*				     */
-#define CFG_MPP_CONTROL_1	0x11110000	/*				     */
-#define CFG_MPP_CONTROL_2	0x11111111	/*				     */
-#define CFG_MPP_CONTROL_3	0x00001111	/*				     */
-/* #define CFG_SERIAL_PORT_MUX	0x00000102*/	/*				     */
+#define CONFIG_SYS_MPP_CONTROL_0	0x00002222	/*				     */
+#define CONFIG_SYS_MPP_CONTROL_1	0x11110000	/*				     */
+#define CONFIG_SYS_MPP_CONTROL_2	0x11111111	/*				     */
+#define CONFIG_SYS_MPP_CONTROL_3	0x00001111	/*				     */
+/* #define CONFIG_SYS_SERIAL_PORT_MUX	0x00000102*/	/*				     */
 
 
-#define CFG_GPP_LEVEL_CONTROL	0xffffffff	/* 1111 1111 1111 1111 1111 1111 1111 1111*/
+#define CONFIG_SYS_GPP_LEVEL_CONTROL	0xffffffff	/* 1111 1111 1111 1111 1111 1111 1111 1111*/
 
 /* setup new config_value for MV64360 DDR-RAM To_do !! */
-/*# define CFG_SDRAM_CONFIG	0xd8e18200*/	/* 0x448 */
-/*# define CFG_SDRAM_CONFIG	0xd8e14400*/	/* 0x1400 */
+/*# define CONFIG_SYS_SDRAM_CONFIG	0xd8e18200*/	/* 0x448 */
+/*# define CONFIG_SYS_SDRAM_CONFIG	0xd8e14400*/	/* 0x1400 */
 				/* GB has high prio.
 				   idma has low prio
 				   MPSC has low prio
@@ -393,7 +393,7 @@
 				   virtual interleaving enable */
 				/* 15 14 13:0 */
 				/* 0  1	 0x400 */
-# define CFG_SDRAM_CONFIG	0x58200400	/* 0x1400  copied from Dink32 bzw. VxWorks*/
+# define CONFIG_SYS_SDRAM_CONFIG	0x58200400	/* 0x1400  copied from Dink32 bzw. VxWorks*/
 
 
 /*-----------------------------------------------------------------------
@@ -411,31 +411,31 @@
 #define CONFIG_PCI_SCAN_SHOW		/* show devices on bus		*/
 
 /* PCI MEMORY MAP section */
-#define CFG_PCI0_MEM_BASE	0x80000000
-#define CFG_PCI0_MEM_SIZE	_128M
-#define CFG_PCI1_MEM_BASE	0x88000000
-#define CFG_PCI1_MEM_SIZE	_128M
+#define CONFIG_SYS_PCI0_MEM_BASE	0x80000000
+#define CONFIG_SYS_PCI0_MEM_SIZE	_128M
+#define CONFIG_SYS_PCI1_MEM_BASE	0x88000000
+#define CONFIG_SYS_PCI1_MEM_SIZE	_128M
 
-#define CFG_PCI0_0_MEM_SPACE	(CFG_PCI0_MEM_BASE)
-#define CFG_PCI1_0_MEM_SPACE	(CFG_PCI1_MEM_BASE)
+#define CONFIG_SYS_PCI0_0_MEM_SPACE	(CONFIG_SYS_PCI0_MEM_BASE)
+#define CONFIG_SYS_PCI1_0_MEM_SPACE	(CONFIG_SYS_PCI1_MEM_BASE)
 
 /* PCI I/O MAP section */
-#define CFG_PCI0_IO_BASE	0xfa000000
-#define CFG_PCI0_IO_SIZE	_16M
-#define CFG_PCI1_IO_BASE	0xfb000000
-#define CFG_PCI1_IO_SIZE	_16M
+#define CONFIG_SYS_PCI0_IO_BASE	0xfa000000
+#define CONFIG_SYS_PCI0_IO_SIZE	_16M
+#define CONFIG_SYS_PCI1_IO_BASE	0xfb000000
+#define CONFIG_SYS_PCI1_IO_SIZE	_16M
 
-#define CFG_PCI0_IO_SPACE	(CFG_PCI0_IO_BASE)
-#define CFG_PCI0_IO_SPACE_PCI	0x00000000
-#define CFG_PCI1_IO_SPACE	(CFG_PCI1_IO_BASE)
-#define CFG_PCI1_IO_SPACE_PCI	0x00000000
+#define CONFIG_SYS_PCI0_IO_SPACE	(CONFIG_SYS_PCI0_IO_BASE)
+#define CONFIG_SYS_PCI0_IO_SPACE_PCI	0x00000000
+#define CONFIG_SYS_PCI1_IO_SPACE	(CONFIG_SYS_PCI1_IO_BASE)
+#define CONFIG_SYS_PCI1_IO_SPACE_PCI	0x00000000
 
-#define CFG_ISA_IO_BASE_ADDRESS (CFG_PCI0_IO_BASE)
+#define CONFIG_SYS_ISA_IO_BASE_ADDRESS (CONFIG_SYS_PCI0_IO_BASE)
 
 #if defined (CONFIG_750CX)
-#define CFG_PCI_IDSEL 0x0
+#define CONFIG_SYS_PCI_IDSEL 0x0
 #else
-#define CFG_PCI_IDSEL 0x30
+#define CONFIG_SYS_PCI_IDSEL 0x30
 #endif
 
 /*-----------------------------------------------------------------------
@@ -447,16 +447,16 @@
 #define CONFIG_IDE_RESET		/* no reset for ide supported	*/
 #define CONFIG_IDE_PREINIT		/* check for units		*/
 
-#define CFG_IDE_MAXBUS		2		/* max. 1 IDE busses	*/
-#define CFG_IDE_MAXDEVICE	(CFG_IDE_MAXBUS*2) /* max. 1 drives per IDE bus */
+#define CONFIG_SYS_IDE_MAXBUS		2		/* max. 1 IDE busses	*/
+#define CONFIG_SYS_IDE_MAXDEVICE	(CONFIG_SYS_IDE_MAXBUS*2) /* max. 1 drives per IDE bus */
 
-#define CFG_ATA_BASE_ADDR	0
-#define CFG_ATA_IDE0_OFFSET	0
-#define CFG_ATA_IDE1_OFFSET	0
+#define CONFIG_SYS_ATA_BASE_ADDR	0
+#define CONFIG_SYS_ATA_IDE0_OFFSET	0
+#define CONFIG_SYS_ATA_IDE1_OFFSET	0
 
-#define CFG_ATA_DATA_OFFSET	0x0000	/* Offset for data I/O			*/
-#define CFG_ATA_REG_OFFSET	0x0000	/* Offset for normal register accesses	*/
-#define CFG_ATA_ALT_OFFSET	0x0000	/* Offset for alternate registers	*/
+#define CONFIG_SYS_ATA_DATA_OFFSET	0x0000	/* Offset for data I/O			*/
+#define CONFIG_SYS_ATA_REG_OFFSET	0x0000	/* Offset for normal register accesses	*/
+#define CONFIG_SYS_ATA_ALT_OFFSET	0x0000	/* Offset for alternate registers	*/
 
 
 /*----------------------------------------------------------------------
@@ -469,28 +469,28 @@
  */
 
 /* SDRAM */
-#define CFG_IBAT0L (CFG_SDRAM_BASE | BATL_PP_RW | BATL_CACHEINHIBIT)
-#define CFG_IBAT0U (CFG_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
-#define CFG_DBAT0L (CFG_SDRAM_BASE | BATL_PP_RW | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
-#define CFG_DBAT0U CFG_IBAT0U
+#define CONFIG_SYS_IBAT0L (CONFIG_SYS_SDRAM_BASE | BATL_PP_RW | BATL_CACHEINHIBIT)
+#define CONFIG_SYS_IBAT0U (CONFIG_SYS_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CONFIG_SYS_DBAT0L (CONFIG_SYS_SDRAM_BASE | BATL_PP_RW | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
+#define CONFIG_SYS_DBAT0U CONFIG_SYS_IBAT0U
 
 /* init ram */
-#define CFG_IBAT1L  (CFG_INIT_RAM_ADDR | BATL_PP_RW | BATL_MEMCOHERENCE)
-#define CFG_IBAT1U  (CFG_INIT_RAM_ADDR | BATU_BL_256K | BATU_VS | BATU_VP)
-#define CFG_DBAT1L  CFG_IBAT1L
-#define CFG_DBAT1U  CFG_IBAT1U
+#define CONFIG_SYS_IBAT1L  (CONFIG_SYS_INIT_RAM_ADDR | BATL_PP_RW | BATL_MEMCOHERENCE)
+#define CONFIG_SYS_IBAT1U  (CONFIG_SYS_INIT_RAM_ADDR | BATU_BL_256K | BATU_VS | BATU_VP)
+#define CONFIG_SYS_DBAT1L  CONFIG_SYS_IBAT1L
+#define CONFIG_SYS_DBAT1U  CONFIG_SYS_IBAT1U
 
 /* PCI0, PCI1 in one BAT */
-#define CFG_IBAT2L BATL_NO_ACCESS
-#define CFG_IBAT2U CFG_DBAT2U
-#define CFG_DBAT2L (CFG_PCI0_MEM_BASE | BATL_CACHEINHIBIT | BATL_PP_RW | BATL_GUARDEDSTORAGE)
-#define CFG_DBAT2U (CFG_PCI0_MEM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CONFIG_SYS_IBAT2L BATL_NO_ACCESS
+#define CONFIG_SYS_IBAT2U CONFIG_SYS_DBAT2U
+#define CONFIG_SYS_DBAT2L (CONFIG_SYS_PCI0_MEM_BASE | BATL_CACHEINHIBIT | BATL_PP_RW | BATL_GUARDEDSTORAGE)
+#define CONFIG_SYS_DBAT2U (CONFIG_SYS_PCI0_MEM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
 
 /* GT regs, bootrom, all the devices, PCI I/O */
-#define CFG_IBAT3L (CFG_MISC_REGION_BASE | BATL_CACHEINHIBIT | BATL_PP_RW)
-#define CFG_IBAT3U (CFG_MISC_REGION_BASE | BATU_VS | BATU_VP | BATU_BL_256M)
-#define CFG_DBAT3L (CFG_MISC_REGION_BASE | BATL_CACHEINHIBIT | BATL_PP_RW | BATL_GUARDEDSTORAGE)
-#define CFG_DBAT3U CFG_IBAT3U
+#define CONFIG_SYS_IBAT3L (CONFIG_SYS_MISC_REGION_BASE | BATL_CACHEINHIBIT | BATL_PP_RW)
+#define CONFIG_SYS_IBAT3U (CONFIG_SYS_MISC_REGION_BASE | BATU_VS | BATU_VP | BATU_BL_256M)
+#define CONFIG_SYS_DBAT3L (CONFIG_SYS_MISC_REGION_BASE | BATL_CACHEINHIBIT | BATL_PP_RW | BATL_GUARDEDSTORAGE)
+#define CONFIG_SYS_DBAT3U CONFIG_SYS_IBAT3U
 
 /*
  * 750FX IBAT and DBAT pairs (To_do: define regins for I(D)BAT4 - I(D)BAT7)
@@ -501,52 +501,52 @@
 /*#define SETUP_HIGH_BATS_FX750*/		/* initialize BATS 4-7 */
 
 #ifdef SETUP_HIGH_BATS_FX750
-#define CFG_IBAT4L (CFG_SDRAM1_BASE | BATL_PP_RW | BATL_CACHEINHIBIT)
-#define CFG_IBAT4U (CFG_SDRAM1_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
-#define CFG_DBAT4L (CFG_SDRAM1_BASE | BATL_PP_RW | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
-#define CFG_DBAT4U CFG_IBAT4U
+#define CONFIG_SYS_IBAT4L (CONFIG_SYS_SDRAM1_BASE | BATL_PP_RW | BATL_CACHEINHIBIT)
+#define CONFIG_SYS_IBAT4U (CONFIG_SYS_SDRAM1_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CONFIG_SYS_DBAT4L (CONFIG_SYS_SDRAM1_BASE | BATL_PP_RW | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
+#define CONFIG_SYS_DBAT4U CONFIG_SYS_IBAT4U
 
 /* IBAT5 and DBAT5 */
-#define CFG_IBAT5L (CFG_SDRAM2_BASE | BATL_PP_RW | BATL_CACHEINHIBIT)
-#define CFG_IBAT5U (CFG_SDRAM2_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
-#define CFG_DBAT5L (CFG_SDRAM2_BASE | BATL_PP_RW | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
-#define CFG_DBAT5U CFG_IBAT5U
+#define CONFIG_SYS_IBAT5L (CONFIG_SYS_SDRAM2_BASE | BATL_PP_RW | BATL_CACHEINHIBIT)
+#define CONFIG_SYS_IBAT5U (CONFIG_SYS_SDRAM2_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CONFIG_SYS_DBAT5L (CONFIG_SYS_SDRAM2_BASE | BATL_PP_RW | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
+#define CONFIG_SYS_DBAT5U CONFIG_SYS_IBAT5U
 
 /* IBAT6 and DBAT6 */
-#define CFG_IBAT6L (CFG_SDRAM3_BASE | BATL_PP_RW | BATL_CACHEINHIBIT)
-#define CFG_IBAT6U (CFG_SDRAM3_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
-#define CFG_DBAT6L (CFG_SDRAM3_BASE | BATL_PP_RW | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
-#define CFG_DBAT6U CFG_IBAT6U
+#define CONFIG_SYS_IBAT6L (CONFIG_SYS_SDRAM3_BASE | BATL_PP_RW | BATL_CACHEINHIBIT)
+#define CONFIG_SYS_IBAT6U (CONFIG_SYS_SDRAM3_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CONFIG_SYS_DBAT6L (CONFIG_SYS_SDRAM3_BASE | BATL_PP_RW | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
+#define CONFIG_SYS_DBAT6U CONFIG_SYS_IBAT6U
 
 /* IBAT7 and DBAT7 */
-#define CFG_IBAT7L (CFG_SDRAM4_BASE | BATL_PP_RW | BATL_CACHEINHIBIT)
-#define CFG_IBAT7U (CFG_SDRAM4_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
-#define CFG_DBAT7L (CFG_SDRAM4_BASE | BATL_PP_RW | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
-#define CFG_DBAT7U CFG_IBAT7U
+#define CONFIG_SYS_IBAT7L (CONFIG_SYS_SDRAM4_BASE | BATL_PP_RW | BATL_CACHEINHIBIT)
+#define CONFIG_SYS_IBAT7U (CONFIG_SYS_SDRAM4_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CONFIG_SYS_DBAT7L (CONFIG_SYS_SDRAM4_BASE | BATL_PP_RW | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
+#define CONFIG_SYS_DBAT7U CONFIG_SYS_IBAT7U
 
 #else		/* set em out of range for Linux !!!!!!!!!!! */
-#define CFG_IBAT4L (CFG_SDRAM4_BASE | BATL_PP_RW | BATL_CACHEINHIBIT)
-#define CFG_IBAT4U (CFG_SDRAM4_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
-#define CFG_DBAT4L (CFG_SDRAM4_BASE | BATL_PP_RW | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
-#define CFG_DBAT4U CFG_IBAT4U
+#define CONFIG_SYS_IBAT4L (CONFIG_SYS_SDRAM4_BASE | BATL_PP_RW | BATL_CACHEINHIBIT)
+#define CONFIG_SYS_IBAT4U (CONFIG_SYS_SDRAM4_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CONFIG_SYS_DBAT4L (CONFIG_SYS_SDRAM4_BASE | BATL_PP_RW | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
+#define CONFIG_SYS_DBAT4U CONFIG_SYS_IBAT4U
 
 /* IBAT5 and DBAT5 */
-#define CFG_IBAT5L (CFG_SDRAM4_BASE | BATL_PP_RW | BATL_CACHEINHIBIT)
-#define CFG_IBAT5U (CFG_SDRAM4_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
-#define CFG_DBAT5L (CFG_SDRAM4_BASE | BATL_PP_RW | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
-#define CFG_DBAT5U CFG_IBAT4U
+#define CONFIG_SYS_IBAT5L (CONFIG_SYS_SDRAM4_BASE | BATL_PP_RW | BATL_CACHEINHIBIT)
+#define CONFIG_SYS_IBAT5U (CONFIG_SYS_SDRAM4_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CONFIG_SYS_DBAT5L (CONFIG_SYS_SDRAM4_BASE | BATL_PP_RW | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
+#define CONFIG_SYS_DBAT5U CONFIG_SYS_IBAT4U
 
 /* IBAT6 and DBAT6 */
-#define CFG_IBAT6L (CFG_SDRAM4_BASE | BATL_PP_RW | BATL_CACHEINHIBIT)
-#define CFG_IBAT6U (CFG_SDRAM4_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
-#define CFG_DBAT6L (CFG_SDRAM4_BASE | BATL_PP_RW | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
-#define CFG_DBAT6U CFG_IBAT4U
+#define CONFIG_SYS_IBAT6L (CONFIG_SYS_SDRAM4_BASE | BATL_PP_RW | BATL_CACHEINHIBIT)
+#define CONFIG_SYS_IBAT6U (CONFIG_SYS_SDRAM4_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CONFIG_SYS_DBAT6L (CONFIG_SYS_SDRAM4_BASE | BATL_PP_RW | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
+#define CONFIG_SYS_DBAT6U CONFIG_SYS_IBAT4U
 
 /* IBAT7 and DBAT7 */
-#define CFG_IBAT7L (CFG_SDRAM4_BASE | BATL_PP_RW | BATL_CACHEINHIBIT)
-#define CFG_IBAT7U (CFG_SDRAM4_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
-#define CFG_DBAT7L (CFG_SDRAM4_BASE | BATL_PP_RW | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
-#define CFG_DBAT7U CFG_IBAT4U
+#define CONFIG_SYS_IBAT7L (CONFIG_SYS_SDRAM4_BASE | BATL_PP_RW | BATL_CACHEINHIBIT)
+#define CONFIG_SYS_IBAT7U (CONFIG_SYS_SDRAM4_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CONFIG_SYS_DBAT7L (CONFIG_SYS_SDRAM4_BASE | BATL_PP_RW | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
+#define CONFIG_SYS_DBAT7U CONFIG_SYS_IBAT4U
 
 #endif
 /* FIXME: ingo end: disable BATs for Linux Kernel */
@@ -560,42 +560,42 @@
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define CFG_BOOTMAPSZ		(8<<20) /* Initial Memory map for Linux */
+#define CONFIG_SYS_BOOTMAPSZ		(8<<20) /* Initial Memory map for Linux */
 
 /*-----------------------------------------------------------------------
  * FLASH organization
  */
-#define CFG_BOOT_FLASH_WIDTH	2	/* 16 bit */
+#define CONFIG_SYS_BOOT_FLASH_WIDTH	2	/* 16 bit */
 
-#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms) */
-#define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms) */
-#define CFG_FLASH_LOCK_TOUT	500	/* Timeout for Flash Lock (in ms) */
+#define CONFIG_SYS_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms) */
+#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms) */
+#define CONFIG_SYS_FLASH_LOCK_TOUT	500	/* Timeout for Flash Lock (in ms) */
 
 #if 0
-#define CFG_ENV_IS_IN_FLASH	0
-#define CFG_ENV_SIZE		0x1000	/* Total Size of Environment Sector */
-#define CFG_ENV_SECT_SIZE	0x10000
-#define CFG_ENV_ADDR		0xFFF78000 /* Marvell 8-Bit Bootflash last sector */
-/* #define CFG_ENV_ADDR	   (CFG_FLASH_BASE+CFG_MONITOR_LEN-CFG_ENV_SECT_SIZE) */
+#define CONFIG_ENV_IS_IN_FLASH
+#define CONFIG_ENV_SIZE		0x1000	/* Total Size of Environment Sector */
+#define CONFIG_ENV_SECT_SIZE	0x10000
+#define CONFIG_ENV_ADDR		0xFFF78000 /* Marvell 8-Bit Bootflash last sector */
+/* #define CONFIG_ENV_ADDR	   (CONFIG_SYS_FLASH_BASE+CONFIG_SYS_MONITOR_LEN-CONFIG_ENV_SECT_SIZE) */
 #endif
 
-#define CFG_ENV_IS_IN_EEPROM	1	/* use EEPROM for environment vars */
-#define CFG_EEPROM_PAGE_WRITE_BITS 5
-#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 20
-#define CFG_I2C_EEPROM_ADDR	0x050
-#define CFG_ENV_OFFSET		0x200	/* environment starts at the beginning of the EEPROM */
-#define CFG_ENV_SIZE		0x600	/* 2048 bytes may be used for env vars*/
+#define CONFIG_ENV_IS_IN_EEPROM	1	/* use EEPROM for environment vars */
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 5
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 20
+#define CONFIG_SYS_I2C_EEPROM_ADDR	0x050
+#define CONFIG_ENV_OFFSET		0x200	/* environment starts at the beginning of the EEPROM */
+#define CONFIG_ENV_SIZE		0x600	/* 2048 bytes may be used for env vars*/
 
-#define CFG_NVRAM_BASE_ADDR	0xf0000000		/* NVRAM base address	*/
-#define CFG_NVRAM_SIZE		(32*1024)		/* NVRAM size		*/
-#define CFG_VXWORKS_MAC_PTR	(CFG_NVRAM_BASE_ADDR+CFG_NVRAM_SIZE-0x40)
+#define CONFIG_SYS_NVRAM_BASE_ADDR	0xf0000000		/* NVRAM base address	*/
+#define CONFIG_SYS_NVRAM_SIZE		(32*1024)		/* NVRAM size		*/
+#define CONFIG_SYS_VXWORKS_MAC_PTR	(CONFIG_SYS_NVRAM_BASE_ADDR+CONFIG_SYS_NVRAM_SIZE-0x40)
 
 /*-----------------------------------------------------------------------
  * Cache Configuration
  */
-#define CFG_CACHELINE_SIZE	32	/* For all MPC74xx CPUs		 */
+#define CONFIG_SYS_CACHELINE_SIZE	32	/* For all MPC74xx CPUs		 */
 #if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value */
+#define CONFIG_SYS_CACHELINE_SHIFT	5	/* log base 2 of the above value */
 #endif
 
 /*-----------------------------------------------------------------------
@@ -603,8 +603,8 @@
  * look in include/mpc74xx.h for the defines used here
  */
 
-/*#define CFG_L2*/
-#undef CFG_L2
+/*#define CONFIG_SYS_L2*/
+#undef CONFIG_SYS_L2
 
 /*    #ifdef CONFIG_750CX*/
 #if defined (CONFIG_750CX) || defined (CONFIG_750FX)
@@ -624,6 +624,6 @@
 #define BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH */
 #define BOOTFLAG_WARM	0x02		/* Software reboot		    */
 
-#define CFG_BOARD_ASM_INIT	1
+#define CONFIG_SYS_BOARD_ASM_INIT	1
 
 #endif	/* __CONFIG_H */
diff --git a/include/configs/CPCIISER4.h b/include/configs/CPCIISER4.h
index 78b754c19..326371253 100644
--- a/include/configs/CPCIISER4.h
+++ b/include/configs/CPCIISER4.h
@@ -48,8 +48,9 @@
 #define CONFIG_BOOTCOMMAND	"bootm fff00000"
 
 #define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
-#define CFG_LOADS_BAUD_CHANGE	1	/* allow baudrate change	*/
+#define CONFIG_SYS_LOADS_BAUD_CHANGE	1	/* allow baudrate change	*/
 
+#define CONFIG_PPC4xx_EMAC
 #define CONFIG_MII		1	/* MII PHY management		*/
 #define CONFIG_PHY_ADDR		0	/* PHY address			*/
 #define CONFIG_LXT971_NO_SLEEP  1       /* disable sleep mode in LXT971 */
@@ -92,33 +93,33 @@
 /*
  * Miscellaneous configurable options
  */
-#define CFG_LONGHELP			/* undef to save memory		*/
-#define CFG_PROMPT	"=> "		/* Monitor Command Prompt	*/
+#define CONFIG_SYS_LONGHELP			/* undef to save memory		*/
+#define CONFIG_SYS_PROMPT	"=> "		/* Monitor Command Prompt	*/
 #if defined(CONFIG_CMD_KGDB)
-#define CFG_CBSIZE	1024		/* Console I/O Buffer Size	*/
+#define CONFIG_SYS_CBSIZE	1024		/* Console I/O Buffer Size	*/
 #else
-#define CFG_CBSIZE	256		/* Console I/O Buffer Size	*/
+#define CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size	*/
 #endif
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define CFG_MAXARGS	16		/* max number of command args	*/
-#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS	16		/* max number of command args	*/
+#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
 
-#define CFG_CONSOLE_INFO_QUIET	1	/* don't print console @ startup*/
+#define CONFIG_SYS_CONSOLE_INFO_QUIET	1	/* don't print console @ startup*/
 
-#define CFG_MEMTEST_START	0x0400000	/* memtest works on	*/
-#define CFG_MEMTEST_END		0x0C00000	/* 4 ... 12 MB in DRAM	*/
+#define CONFIG_SYS_MEMTEST_START	0x0400000	/* memtest works on	*/
+#define CONFIG_SYS_MEMTEST_END		0x0C00000	/* 4 ... 12 MB in DRAM	*/
 
-#define CFG_EXT_SERIAL_CLOCK	1843200	 /* use external serial clock	*/
+#define CONFIG_SYS_EXT_SERIAL_CLOCK	1843200	 /* use external serial clock	*/
 
 /* The following table includes the supported baudrates */
-#define CFG_BAUDRATE_TABLE	\
+#define CONFIG_SYS_BAUDRATE_TABLE	\
 	{ 300, 600, 1200, 2400, 4800, 9600, 19200, 38400,     \
 	 57600, 115200, 230400, 460800, 921600 }
 
-#define CFG_LOAD_ADDR	0x100000	/* default load address */
-#define CFG_EXTBDINFO	1		/* To use extended board_into (bd_t) */
+#define CONFIG_SYS_LOAD_ADDR	0x100000	/* default load address */
+#define CONFIG_SYS_EXTBDINFO	1		/* To use extended board_into (bd_t) */
 
-#define CFG_HZ		1000		/* decrementer freq: 1 ms ticks */
+#define CONFIG_SYS_HZ		1000		/* decrementer freq: 1 ms ticks */
 
 #define CONFIG_ZERO_BOOTDELAY_CHECK	/* check for keypress on bootdelay==0 */
 
@@ -135,74 +136,73 @@
 #define CONFIG_PCI_PNP			/* do pci plug-and-play		*/
 					/* resource configuration	*/
 
-#define CFG_PCI_SUBSYS_VENDORID 0x12FE	/* PCI Vendor ID: esd gmbh	*/
-#define CFG_PCI_SUBSYS_DEVICEID 0x0404	/* PCI Device ID: CPCI-ISER4	*/
-#define CFG_PCI_PTM1LA	0x00000000	/* point to sdram		*/
-#define CFG_PCI_PTM1MS	0xff000001	/* 16MB, enable hard-wired to 1 */
-#define CFG_PCI_PTM1PCI 0x00000000	/* Host: use this pci address	*/
-#define CFG_PCI_PTM2LA	0xffe00000	/* point to flash		*/
-#define CFG_PCI_PTM2MS	0xffe00001	/* 2MB, enable			*/
-#define CFG_PCI_PTM2PCI 0x04000000	/* Host: use this pci address	*/
+#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x12FE	/* PCI Vendor ID: esd gmbh	*/
+#define CONFIG_SYS_PCI_SUBSYS_DEVICEID 0x0404	/* PCI Device ID: CPCI-ISER4	*/
+#define CONFIG_SYS_PCI_PTM1LA	0x00000000	/* point to sdram		*/
+#define CONFIG_SYS_PCI_PTM1MS	0xff000001	/* 16MB, enable hard-wired to 1 */
+#define CONFIG_SYS_PCI_PTM1PCI 0x00000000	/* Host: use this pci address	*/
+#define CONFIG_SYS_PCI_PTM2LA	0xffe00000	/* point to flash		*/
+#define CONFIG_SYS_PCI_PTM2MS	0xffe00001	/* 2MB, enable			*/
+#define CONFIG_SYS_PCI_PTM2PCI 0x04000000	/* Host: use this pci address	*/
 
 /*-----------------------------------------------------------------------
  * Start addresses for the final memory configuration
  * (Set up by the startup code)
- * Please note that CFG_SDRAM_BASE _must_ start at 0
+ * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
  */
-#define CFG_SDRAM_BASE		0x00000000
-#define CFG_FLASH_BASE		0xFFFC0000
-#define CFG_MONITOR_BASE	CFG_FLASH_BASE
-#define CFG_MONITOR_LEN		(256 * 1024)	/* Reserve 256 kB for Monitor	*/
-#define CFG_MALLOC_LEN		(128 * 1024)	/* Reserve 128 kB for malloc()	*/
+#define CONFIG_SYS_SDRAM_BASE		0x00000000
+#define CONFIG_SYS_FLASH_BASE		0xFFFC0000
+#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_FLASH_BASE
+#define CONFIG_SYS_MONITOR_LEN		(256 * 1024)	/* Reserve 256 kB for Monitor	*/
+#define CONFIG_SYS_MALLOC_LEN		(128 * 1024)	/* Reserve 128 kB for malloc()	*/
 
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
+#define CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
 /*-----------------------------------------------------------------------
  * FLASH organization
  */
-#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
-#define CFG_MAX_FLASH_SECT	256	/* max number of sectors on one chip	*/
+#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
+#define CONFIG_SYS_MAX_FLASH_SECT	256	/* max number of sectors on one chip	*/
 
-#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
-#define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
+#define CONFIG_SYS_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
+#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
 
-#define CFG_FLASH_WORD_SIZE	unsigned short	/* flash word size (width)	*/
-#define CFG_FLASH_ADDR0		0x5555	/* 1st address for flash config cycles	*/
-#define CFG_FLASH_ADDR1		0x2AAA	/* 2nd address for flash config cycles	*/
+#define CONFIG_SYS_FLASH_WORD_SIZE	unsigned short	/* flash word size (width)	*/
+#define CONFIG_SYS_FLASH_ADDR0		0x5555	/* 1st address for flash config cycles	*/
+#define CONFIG_SYS_FLASH_ADDR1		0x2AAA	/* 2nd address for flash config cycles	*/
 /*
  * The following defines are added for buggy IOP480 byte interface.
  * All other boards should use the standard values (CPCI405 etc.)
  */
-#define CFG_FLASH_READ0		0x0000	/* 0 is standard			*/
-#define CFG_FLASH_READ1		0x0001	/* 1 is standard			*/
-#define CFG_FLASH_READ2		0x0002	/* 2 is standard			*/
+#define CONFIG_SYS_FLASH_READ0		0x0000	/* 0 is standard			*/
+#define CONFIG_SYS_FLASH_READ1		0x0001	/* 1 is standard			*/
+#define CONFIG_SYS_FLASH_READ2		0x0002	/* 2 is standard			*/
 
-#define CFG_FLASH_EMPTY_INFO		/* print 'E' for empty sector on flinfo */
+#define CONFIG_SYS_FLASH_EMPTY_INFO		/* print 'E' for empty sector on flinfo */
 
 /*-----------------------------------------------------------------------
  * I2C EEPROM (CAT24WC08) for environment
  */
 #define CONFIG_HARD_I2C			/* I2C with hardware support */
-#define CFG_I2C_SPEED		400000	/* I2C speed and slave address */
-#define CFG_I2C_SLAVE		0x7F
+#define CONFIG_SYS_I2C_SPEED		400000	/* I2C speed and slave address */
+#define CONFIG_SYS_I2C_SLAVE		0x7F
 
-#define CFG_I2C_EEPROM_ADDR	0x50	/* EEPROM CAT28WC08		*/
-#define CFG_I2C_EEPROM_ADDR_LEN 1	/* Bytes of address		*/
+#define CONFIG_SYS_I2C_EEPROM_ADDR	0x50	/* EEPROM CAT28WC08		*/
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1	/* Bytes of address		*/
 /* mask of address bits that overflow into the "EEPROM chip address"	*/
-#define CFG_I2C_EEPROM_ADDR_OVERFLOW	0x07
-#define CFG_EEPROM_PAGE_WRITE_BITS 4	/* The Catalyst CAT24WC08 has	*/
+#define CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW	0x07
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 4	/* The Catalyst CAT24WC08 has	*/
 					/* 16 byte page write mode using*/
 					/* last 4 bits of the address	*/
-#define CFG_EEPROM_PAGE_WRITE_DELAY_MS	10   /* and takes up to 10 msec */
-#define CFG_EEPROM_PAGE_WRITE_ENABLE
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	10   /* and takes up to 10 msec */
 
-#define CFG_ENV_IS_IN_EEPROM	1	/* use EEPROM for environment vars */
-#define CFG_ENV_OFFSET		0x000	/* environment starts at the beginning of the EEPROM */
-#define CFG_ENV_SIZE		0x300	/* 768 bytes may be used for env vars */
+#define CONFIG_ENV_IS_IN_EEPROM	1	/* use EEPROM for environment vars */
+#define CONFIG_ENV_OFFSET		0x000	/* environment starts at the beginning of the EEPROM */
+#define CONFIG_ENV_SIZE		0x300	/* 768 bytes may be used for env vars */
 				   /* total size of a CAT24WC08 is 1024 bytes */
 
 /*
@@ -219,30 +219,30 @@
  */
 
 /* Memory Bank 0 (Flash Bank 0) initialization					*/
-#define CFG_EBC_PB0AP		0x92015480
-#define CFG_EBC_PB0CR		0xFFC5A000  /* BAS=0xFFC,BS=4MB,BU=R/W,BW=16bit */
+#define CONFIG_SYS_EBC_PB0AP		0x92015480
+#define CONFIG_SYS_EBC_PB0CR		0xFFC5A000  /* BAS=0xFFC,BS=4MB,BU=R/W,BW=16bit */
 
 /* Memory Bank 1 (Uart 8bit) initialization					*/
-#define CFG_EBC_PB1AP		0x01000480  /* TWT=2,TH=2,no Ready,BEM=0,SOR=1	*/
-#define CFG_EBC_PB1CR		0xF0018000  /* BAS=0xF00,BS=1MB,BU=R/W,BW=8bit	*/
+#define CONFIG_SYS_EBC_PB1AP		0x01000480  /* TWT=2,TH=2,no Ready,BEM=0,SOR=1	*/
+#define CONFIG_SYS_EBC_PB1CR		0xF0018000  /* BAS=0xF00,BS=1MB,BU=R/W,BW=8bit	*/
 
 /* Memory Bank 2 (Uart 32bit) initialization					*/
-#define CFG_EBC_PB2AP		0x000004c0  /* no Ready, BEM=1			*/
-#define CFG_EBC_PB2CR		0xF011C000  /* BAS=0xF01,BS=1MB,BU=R/W,BW=32bit */
+#define CONFIG_SYS_EBC_PB2AP		0x000004c0  /* no Ready, BEM=1			*/
+#define CONFIG_SYS_EBC_PB2CR		0xF011C000  /* BAS=0xF01,BS=1MB,BU=R/W,BW=32bit */
 
 /* Memory Bank 3 (FPGA Reset) initialization					*/
-#define CFG_EBC_PB3AP		0x010004C0  /* no Ready, BEM=1			*/
-#define CFG_EBC_PB3CR		0xF021A000  /* BAS=0xF02,BS=1MB,BU=R/W,BW=16bit */
+#define CONFIG_SYS_EBC_PB3AP		0x010004C0  /* no Ready, BEM=1			*/
+#define CONFIG_SYS_EBC_PB3CR		0xF021A000  /* BAS=0xF02,BS=1MB,BU=R/W,BW=16bit */
 
 /*-----------------------------------------------------------------------
  * Definitions for initial stack pointer and data area (in DPRAM)
  */
-#define CFG_INIT_DCACHE_CS	7	/* use cs # 7 for data cache memory    */
-#define CFG_INIT_RAM_ADDR	0x40000000  /* use data cache		       */
-#define CFG_INIT_RAM_END	0x2000	/* End of used area in RAM	       */
-#define CFG_GBL_DATA_SIZE      128  /* size in bytes reserved for initial data */
-#define CFG_GBL_DATA_OFFSET    (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_INIT_DCACHE_CS	7	/* use cs # 7 for data cache memory    */
+#define CONFIG_SYS_INIT_RAM_ADDR	0x40000000  /* use data cache		       */
+#define CONFIG_SYS_INIT_RAM_END	0x2000	/* End of used area in RAM	       */
+#define CONFIG_SYS_GBL_DATA_SIZE      128  /* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET    (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
 /*
  * Internal Definitions
diff --git a/include/configs/CPU86.h b/include/configs/CPU86.h
index 10cebc99c..cf21fd90e 100644
--- a/include/configs/CPU86.h
+++ b/include/configs/CPU86.h
@@ -83,10 +83,10 @@
  * - RAM for BD/Buffers is on the 60x Bus (see 28-13)
  * - Enable Full Duplex in FSMR
  */
-# define CFG_CMXFCR_MASK	(CMXFCR_FC1|CMXFCR_RF1CS_MSK|CMXFCR_TF1CS_MSK)
-# define CFG_CMXFCR_VALUE	(CMXFCR_RF1CS_CLK11|CMXFCR_TF1CS_CLK12)
-# define CFG_CPMFCR_RAMTYPE	0
-# define CFG_FCC_PSMR		(FCC_PSMR_FDE|FCC_PSMR_LPB)
+# define CONFIG_SYS_CMXFCR_MASK	(CMXFCR_FC1|CMXFCR_RF1CS_MSK|CMXFCR_TF1CS_MSK)
+# define CONFIG_SYS_CMXFCR_VALUE	(CMXFCR_RF1CS_CLK11|CMXFCR_TF1CS_CLK12)
+# define CONFIG_SYS_CPMFCR_RAMTYPE	0
+# define CONFIG_SYS_FCC_PSMR		(FCC_PSMR_FDE|FCC_PSMR_LPB)
 
 #elif defined(CONFIG_ETHER_ON_FCC) && (CONFIG_ETHER_INDEX == 2)
 
@@ -96,10 +96,10 @@
  * - RAM for BD/Buffers is on the 60x Bus (see 28-13)
  * - Enable Full Duplex in FSMR
  */
-# define CFG_CMXFCR_MASK	(CMXFCR_FC2|CMXFCR_RF2CS_MSK|CMXFCR_TF2CS_MSK)
-# define CFG_CMXFCR_VALUE	(CMXFCR_RF2CS_CLK13|CMXFCR_TF2CS_CLK14)
-# define CFG_CPMFCR_RAMTYPE	0
-# define CFG_FCC_PSMR		(FCC_PSMR_FDE|FCC_PSMR_LPB)
+# define CONFIG_SYS_CMXFCR_MASK	(CMXFCR_FC2|CMXFCR_RF2CS_MSK|CMXFCR_TF2CS_MSK)
+# define CONFIG_SYS_CMXFCR_VALUE	(CMXFCR_RF2CS_CLK13|CMXFCR_TF2CS_CLK14)
+# define CONFIG_SYS_CPMFCR_RAMTYPE	0
+# define CONFIG_SYS_FCC_PSMR		(FCC_PSMR_FDE|FCC_PSMR_LPB)
 
 #endif /* CONFIG_ETHER_ON_FCC, CONFIG_ETHER_INDEX */
 
@@ -125,8 +125,8 @@
  */
 #define	CONFIG_SOFT_I2C			/* Software I2C support enabled	*/
 
-# define CFG_I2C_SPEED		50000
-# define CFG_I2C_SLAVE		0xFE
+# define CONFIG_SYS_I2C_SPEED		50000
+# define CONFIG_SYS_I2C_SLAVE		0xFE
 /*
  * Software (bit-bang) I2C driver configuration
  */
@@ -141,7 +141,7 @@
 #define I2C_DELAY	udelay(5)	/* 1/4 I2C clock duration */
 
 #define CONFIG_RTC_PCF8563
-#define CFG_I2C_RTC_ADDR	0x51
+#define CONFIG_SYS_I2C_RTC_ADDR	0x51
 
 #undef	CONFIG_WATCHDOG			/* watchdog disabled		*/
 
@@ -149,17 +149,17 @@
  * Disk-On-Chip configuration
  */
 
-#define CFG_MAX_DOC_DEVICE	1	/* Max number of DOC devices	*/
+#define CONFIG_SYS_MAX_DOC_DEVICE	1	/* Max number of DOC devices	*/
 
-#define CFG_DOC_SUPPORT_2000
-#define CFG_DOC_SUPPORT_MILLENNIUM
+#define CONFIG_SYS_DOC_SUPPORT_2000
+#define CONFIG_SYS_DOC_SUPPORT_MILLENNIUM
 
 /*-----------------------------------------------------------------------
  * Miscellaneous configuration options
  */
 
 #define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
-#undef	CFG_LOADS_BAUD_CHANGE		/* don't allow baudrate change	*/
+#undef	CONFIG_SYS_LOADS_BAUD_CHANGE		/* don't allow baudrate change	*/
 
 /*
  * BOOTP options
@@ -189,158 +189,158 @@
 /*
  * Miscellaneous configurable options
  */
-#define	CFG_LONGHELP			/* undef to save memory		*/
-#define	CFG_PROMPT	"=> "		/* Monitor Command Prompt	*/
+#define	CONFIG_SYS_LONGHELP			/* undef to save memory		*/
+#define	CONFIG_SYS_PROMPT	"=> "		/* Monitor Command Prompt	*/
 #if defined(CONFIG_CMD_KGDB)
-#define	CFG_CBSIZE	1024		/* Console I/O Buffer Size	*/
+#define	CONFIG_SYS_CBSIZE	1024		/* Console I/O Buffer Size	*/
 #else
-#define	CFG_CBSIZE	256		/* Console I/O Buffer Size	*/
+#define	CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size	*/
 #endif
-#define	CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define	CFG_MAXARGS	16		/* max number of command args	*/
-#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+#define	CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define	CONFIG_SYS_MAXARGS	16		/* max number of command args	*/
+#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
 
-#define CFG_MEMTEST_START	0x0400000	/* memtest works on	*/
-#define CFG_MEMTEST_END	0x0C00000	/* 4 ... 12 MB in DRAM	*/
+#define CONFIG_SYS_MEMTEST_START	0x0400000	/* memtest works on	*/
+#define CONFIG_SYS_MEMTEST_END	0x0C00000	/* 4 ... 12 MB in DRAM	*/
 
-#define	CFG_LOAD_ADDR	0x100000	/* default load address	*/
+#define	CONFIG_SYS_LOAD_ADDR	0x100000	/* default load address	*/
 
-#define	CFG_HZ		1000		/* decrementer freq: 1 ms ticks	*/
+#define	CONFIG_SYS_HZ		1000		/* decrementer freq: 1 ms ticks	*/
 
-#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
 
-#define	CFG_RESET_ADDRESS 0xFFF00100	/* "bad" address		*/
+#define	CONFIG_SYS_RESET_ADDRESS 0xFFF00100	/* "bad" address		*/
 
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define CFG_BOOTMAPSZ		(8 << 20) /* Initial Memory map for Linux */
+#define CONFIG_SYS_BOOTMAPSZ		(8 << 20) /* Initial Memory map for Linux */
 
 /*-----------------------------------------------------------------------
  * Flash configuration
  */
 
-#define CFG_BOOTROM_BASE	0xFF800000
-#define CFG_BOOTROM_SIZE	0x00080000
-#define CFG_FLASH_BASE		0xFF000000
-#define CFG_FLASH_SIZE		0x00800000
+#define CONFIG_SYS_BOOTROM_BASE	0xFF800000
+#define CONFIG_SYS_BOOTROM_SIZE	0x00080000
+#define CONFIG_SYS_FLASH_BASE		0xFF000000
+#define CONFIG_SYS_FLASH_SIZE		0x00800000
 
 /*-----------------------------------------------------------------------
  * FLASH organization
  */
-#define CFG_MAX_FLASH_BANKS	2	/* max num of memory banks      */
-#define CFG_MAX_FLASH_SECT	128	/* max num of sects on one chip */
+#define CONFIG_SYS_MAX_FLASH_BANKS	2	/* max num of memory banks      */
+#define CONFIG_SYS_MAX_FLASH_SECT	128	/* max num of sects on one chip */
 
-#define CFG_FLASH_ERASE_TOUT	240000	/* Flash Erase Timeout (in ms)  */
-#define CFG_FLASH_WRITE_TOUT	500	/* Flash Write Timeout (in ms)  */
+#define CONFIG_SYS_FLASH_ERASE_TOUT	240000	/* Flash Erase Timeout (in ms)  */
+#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Flash Write Timeout (in ms)  */
 
 /*-----------------------------------------------------------------------
  * Other areas to be mapped
  */
 
 /* CS3: Dual ported SRAM */
-#define CFG_DPSRAM_BASE		0x40000000
-#define CFG_DPSRAM_SIZE		0x00020000
+#define CONFIG_SYS_DPSRAM_BASE		0x40000000
+#define CONFIG_SYS_DPSRAM_SIZE		0x00020000
 
 /* CS4: DiskOnChip */
-#define CFG_DOC_BASE		0xF4000000
-#define CFG_DOC_SIZE		0x00100000
+#define CONFIG_SYS_DOC_BASE		0xF4000000
+#define CONFIG_SYS_DOC_SIZE		0x00100000
 
 /* CS5: FDC37C78 controller */
-#define CFG_FDC37C78_BASE	0xF1000000
-#define CFG_FDC37C78_SIZE	0x00100000
+#define CONFIG_SYS_FDC37C78_BASE	0xF1000000
+#define CONFIG_SYS_FDC37C78_SIZE	0x00100000
 
 /* CS6: Board configuration registers */
-#define CFG_BCRS_BASE		0xF2000000
-#define CFG_BCRS_SIZE		0x00010000
+#define CONFIG_SYS_BCRS_BASE		0xF2000000
+#define CONFIG_SYS_BCRS_SIZE		0x00010000
 
 /* CS7: VME Extended Access Range */
-#define CFG_VMEEAR_BASE		0x80000000
-#define CFG_VMEEAR_SIZE		0x01000000
+#define CONFIG_SYS_VMEEAR_BASE		0x80000000
+#define CONFIG_SYS_VMEEAR_SIZE		0x01000000
 
 /* CS8: VME Standard Access Range */
-#define CFG_VMESAR_BASE		0xFE000000
-#define CFG_VMESAR_SIZE		0x01000000
+#define CONFIG_SYS_VMESAR_BASE		0xFE000000
+#define CONFIG_SYS_VMESAR_SIZE		0x01000000
 
 /* CS9: VME Short I/O Access Range */
-#define CFG_VMESIOAR_BASE	0xFD000000
-#define CFG_VMESIOAR_SIZE	0x01000000
+#define CONFIG_SYS_VMESIOAR_BASE	0xFD000000
+#define CONFIG_SYS_VMESIOAR_SIZE	0x01000000
 
 /*-----------------------------------------------------------------------
  * Hard Reset Configuration Words
  *
- * if you change bits in the HRCW, you must also change the CFG_*
+ * if you change bits in the HRCW, you must also change the CONFIG_SYS_*
  * defines for the various registers affected by the HRCW e.g. changing
- * HRCW_DPPCxx requires you to also change CFG_SIUMCR.
+ * HRCW_DPPCxx requires you to also change CONFIG_SYS_SIUMCR.
  */
 #if defined(CONFIG_BOOT_ROM)
-#define CFG_HRCW_MASTER		(HRCW_CIP | HRCW_ISB100 | HRCW_BMS | \
+#define CONFIG_SYS_HRCW_MASTER		(HRCW_CIP | HRCW_ISB100 | HRCW_BMS | \
 				 HRCW_BPS01 | HRCW_CS10PC01)
 #else
-#define CFG_HRCW_MASTER		(HRCW_CIP | HRCW_ISB100 | HRCW_BMS | HRCW_CS10PC01)
+#define CONFIG_SYS_HRCW_MASTER		(HRCW_CIP | HRCW_ISB100 | HRCW_BMS | HRCW_CS10PC01)
 #endif
 
 /* no slaves so just fill with zeros */
-#define CFG_HRCW_SLAVE1		0
-#define CFG_HRCW_SLAVE2		0
-#define CFG_HRCW_SLAVE3		0
-#define CFG_HRCW_SLAVE4		0
-#define CFG_HRCW_SLAVE5		0
-#define CFG_HRCW_SLAVE6		0
-#define CFG_HRCW_SLAVE7		0
+#define CONFIG_SYS_HRCW_SLAVE1		0
+#define CONFIG_SYS_HRCW_SLAVE2		0
+#define CONFIG_SYS_HRCW_SLAVE3		0
+#define CONFIG_SYS_HRCW_SLAVE4		0
+#define CONFIG_SYS_HRCW_SLAVE5		0
+#define CONFIG_SYS_HRCW_SLAVE6		0
+#define CONFIG_SYS_HRCW_SLAVE7		0
 
 /*-----------------------------------------------------------------------
  * Internal Memory Mapped Register
  */
-#define CFG_IMMR		0xF0000000
+#define CONFIG_SYS_IMMR		0xF0000000
 
 /*-----------------------------------------------------------------------
  * Definitions for initial stack pointer and data area (in DPRAM)
  */
-#define CFG_INIT_RAM_ADDR	CFG_IMMR
-#define CFG_INIT_RAM_END	0x4000  /* End of used area in DPRAM    */
-#define CFG_GBL_DATA_SIZE	128 /* size in bytes reserved for initial data*/
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_IMMR
+#define CONFIG_SYS_INIT_RAM_END	0x4000  /* End of used area in DPRAM    */
+#define CONFIG_SYS_GBL_DATA_SIZE	128 /* size in bytes reserved for initial data*/
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
 /*-----------------------------------------------------------------------
  * Start addresses for the final memory configuration
  * (Set up by the startup code)
- * Please note that CFG_SDRAM_BASE _must_ start at 0
+ * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
  *
- * 60x SDRAM is mapped at CFG_SDRAM_BASE.
+ * 60x SDRAM is mapped at CONFIG_SYS_SDRAM_BASE.
  */
-#define CFG_SDRAM_BASE		0x00000000
-#define CFG_SDRAM_MAX_SIZE	0x08000000	/* max. 128 MB		*/
-#define CFG_MONITOR_BASE	TEXT_BASE
-#define CFG_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor */
-#define CFG_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()*/
+#define CONFIG_SYS_SDRAM_BASE		0x00000000
+#define CONFIG_SYS_SDRAM_MAX_SIZE	0x08000000	/* max. 128 MB		*/
+#define CONFIG_SYS_MONITOR_BASE	TEXT_BASE
+#define CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor */
+#define CONFIG_SYS_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()*/
 
-#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
-# define CFG_RAMBOOT
+#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
+# define CONFIG_SYS_RAMBOOT
 #endif
 
 #if 0
 /* environment is in Flash */
-#define CFG_ENV_IS_IN_FLASH	1
+#define CONFIG_ENV_IS_IN_FLASH	1
 #ifdef CONFIG_BOOT_ROM
-# define CFG_ENV_ADDR		(CFG_FLASH_BASE+0x70000)
-# define CFG_ENV_SIZE		0x10000
-# define CFG_ENV_SECT_SIZE	0x10000
+# define CONFIG_ENV_ADDR		(CONFIG_SYS_FLASH_BASE+0x70000)
+# define CONFIG_ENV_SIZE		0x10000
+# define CONFIG_ENV_SECT_SIZE	0x10000
 #endif
 #else
 /* environment is in EEPROM */
-#define CFG_ENV_IS_IN_EEPROM	1
-#define CFG_I2C_EEPROM_ADDR	0x58	/* EEPROM X24C16		*/
-#define CFG_I2C_EEPROM_ADDR_LEN	1
+#define CONFIG_ENV_IS_IN_EEPROM	1
+#define CONFIG_SYS_I2C_EEPROM_ADDR	0x58	/* EEPROM X24C16		*/
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN	1
 /* mask of address bits that overflow into the "EEPROM chip address"    */
-#define CFG_I2C_EEPROM_ADDR_OVERFLOW	0x07
-#define CFG_EEPROM_PAGE_WRITE_BITS	4
-#define CFG_EEPROM_PAGE_WRITE_DELAY_MS	10	/* and takes up to 10 msec */
-#define CFG_ENV_OFFSET		512
-#define CFG_ENV_SIZE		(2048 - 512)
+#define CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW	0x07
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS	4
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	10	/* and takes up to 10 msec */
+#define CONFIG_ENV_OFFSET		512
+#define CONFIG_ENV_SIZE		(2048 - 512)
 #endif
 
 /*
@@ -355,9 +355,9 @@
 /*-----------------------------------------------------------------------
  * Cache Configuration
  */
-#define CFG_CACHELINE_SIZE      32      /* For MPC8260 CPU              */
+#define CONFIG_SYS_CACHELINE_SIZE      32      /* For MPC8260 CPU              */
 #if defined(CONFIG_CMD_KGDB)
-# define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value */
+# define CONFIG_SYS_CACHELINE_SHIFT	5	/* log base 2 of the above value */
 #endif
 
 /*-----------------------------------------------------------------------
@@ -370,30 +370,30 @@
  *
  * HID1 has only read-only information - nothing to set.
  */
-#define CFG_HID0_INIT   (HID0_ICE|HID0_DCE|HID0_ICFI|\
+#define CONFIG_SYS_HID0_INIT   (HID0_ICE|HID0_DCE|HID0_ICFI|\
 			 HID0_DCI|HID0_IFEM|HID0_ABE)
-#define CFG_HID0_FINAL  (HID0_IFEM|HID0_ABE)
-#define CFG_HID2        0
+#define CONFIG_SYS_HID0_FINAL  (HID0_IFEM|HID0_ABE)
+#define CONFIG_SYS_HID2        0
 
 /*-----------------------------------------------------------------------
  * RMR - Reset Mode Register                                     5-5
  *-----------------------------------------------------------------------
  * turn on Checkstop Reset Enable
  */
-#define CFG_RMR         RMR_CSRE
+#define CONFIG_SYS_RMR         RMR_CSRE
 
 /*-----------------------------------------------------------------------
  * BCR - Bus Configuration                                       4-25
  *-----------------------------------------------------------------------
  */
 #define BCR_APD01	0x10000000
-#define CFG_BCR		(BCR_APD01|BCR_ETM|BCR_LETM)	/* 8260 mode */
+#define CONFIG_SYS_BCR		(BCR_APD01|BCR_ETM|BCR_LETM)	/* 8260 mode */
 
 /*-----------------------------------------------------------------------
  * SIUMCR - SIU Module Configuration                             4-31
  *-----------------------------------------------------------------------
  */
-#define CFG_SIUMCR      (SIUMCR_BBD|SIUMCR_DPPC00|SIUMCR_APPC10|\
+#define CONFIG_SYS_SIUMCR      (SIUMCR_BBD|SIUMCR_DPPC00|SIUMCR_APPC10|\
 			 SIUMCR_CS10PC01|SIUMCR_BCTLC10)
 
 /*-----------------------------------------------------------------------
@@ -403,10 +403,10 @@
  * Watchdog & Bus Monitor Timer max, 60x Bus Monitor enable
  */
 #if defined(CONFIG_WATCHDOG)
-#define CFG_SYPCR       (SYPCR_SWTC|SYPCR_BMT|SYPCR_PBME|SYPCR_LBME|\
+#define CONFIG_SYS_SYPCR       (SYPCR_SWTC|SYPCR_BMT|SYPCR_PBME|SYPCR_LBME|\
 			 SYPCR_SWRI|SYPCR_SWP|SYPCR_SWE)
 #else
-#define CFG_SYPCR       (SYPCR_SWTC|SYPCR_BMT|SYPCR_PBME|SYPCR_LBME|\
+#define CONFIG_SYS_SYPCR       (SYPCR_SWTC|SYPCR_BMT|SYPCR_PBME|SYPCR_LBME|\
 			 SYPCR_SWRI|SYPCR_SWP)
 #endif /* CONFIG_WATCHDOG */
 
@@ -416,7 +416,7 @@
  * Clear once per Second and Alarm Interrupt Status, Set 32KHz timersclk,
  * and enable Time Counter
  */
-#define CFG_TMCNTSC     (TMCNTSC_SEC|TMCNTSC_ALR|TMCNTSC_TCF|TMCNTSC_TCE)
+#define CONFIG_SYS_TMCNTSC     (TMCNTSC_SEC|TMCNTSC_ALR|TMCNTSC_TCF|TMCNTSC_TCE)
 
 /*-----------------------------------------------------------------------
  * PISCR - Periodic Interrupt Status and Control                 4-42
@@ -424,33 +424,33 @@
  * Clear Periodic Interrupt Status, Set 32KHz timersclk, and enable
  * Periodic timer
  */
-#define CFG_PISCR       (PISCR_PS|PISCR_PTF|PISCR_PTE)
+#define CONFIG_SYS_PISCR       (PISCR_PS|PISCR_PTF|PISCR_PTE)
 
 /*-----------------------------------------------------------------------
  * SCCR - System Clock Control                                   9-8
  *-----------------------------------------------------------------------
  * Ensure DFBRG is Divide by 16
  */
-#define CFG_SCCR        SCCR_DFBRG01
+#define CONFIG_SYS_SCCR        SCCR_DFBRG01
 
 /*-----------------------------------------------------------------------
  * RCCR - RISC Controller Configuration                         13-7
  *-----------------------------------------------------------------------
  */
-#define CFG_RCCR        0
+#define CONFIG_SYS_RCCR        0
 
-#define CFG_MIN_AM_MASK	0xC0000000
+#define CONFIG_SYS_MIN_AM_MASK	0xC0000000
 /*-----------------------------------------------------------------------
  * MPTPR - Memory Refresh Timer Prescaler Register              10-18
  *-----------------------------------------------------------------------
  */
-#define CFG_MPTPR       0x1F00
+#define CONFIG_SYS_MPTPR       0x1F00
 
 /*-----------------------------------------------------------------------
  * PSRT - Refresh Timer Register                                10-16
  *-----------------------------------------------------------------------
  */
-#define CFG_PSRT        0x0f
+#define CONFIG_SYS_PSRT        0x0f
 
 /*-----------------------------------------------------------------------
  * PSRT - SDRAM Mode Register                                   10-10
@@ -459,12 +459,12 @@
 
 	/* SDRAM initialization values for 8-column chips
 	 */
-#define CFG_OR2_8COL	(CFG_MIN_AM_MASK		|\
+#define CONFIG_SYS_OR2_8COL	(CONFIG_SYS_MIN_AM_MASK		|\
 			 ORxS_BPD_4			|\
 			 ORxS_ROWST_PBI0_A9		|\
 			 ORxS_NUMR_12)
 
-#define CFG_PSDMR_8COL	(PSDMR_SDAM_A13_IS_A5		|\
+#define CONFIG_SYS_PSDMR_8COL	(PSDMR_SDAM_A13_IS_A5		|\
 			 PSDMR_BSMA_A14_A16		|\
 			 PSDMR_SDA10_PBI0_A10		|\
 			 PSDMR_RFRC_7_CLK		|\
@@ -476,12 +476,12 @@
 
 	/* SDRAM initialization values for 9-column chips
 	 */
-#define CFG_OR2_9COL	(CFG_MIN_AM_MASK		|\
+#define CONFIG_SYS_OR2_9COL	(CONFIG_SYS_MIN_AM_MASK		|\
 			 ORxS_BPD_4			|\
 			 ORxS_ROWST_PBI0_A7		|\
 			 ORxS_NUMR_13)
 
-#define CFG_PSDMR_9COL	(PSDMR_SDAM_A14_IS_A5		|\
+#define CONFIG_SYS_PSDMR_9COL	(PSDMR_SDAM_A14_IS_A5		|\
 			 PSDMR_BSMA_A13_A15		|\
 			 PSDMR_SDA10_PBI0_A9		|\
 			 PSDMR_RFRC_7_CLK		|\
@@ -502,17 +502,17 @@
  *
  */
 
-#define CFG_MRS_OFFS	0x00000000
+#define CONFIG_SYS_MRS_OFFS	0x00000000
 
 #ifdef CONFIG_BOOT_ROM
 /* Bank 0 - Boot ROM
  */
-#define CFG_BR0_PRELIM  ((CFG_BOOTROM_BASE & BRx_BA_MSK)|\
+#define CONFIG_SYS_BR0_PRELIM  ((CONFIG_SYS_BOOTROM_BASE & BRx_BA_MSK)|\
 			 BRx_PS_8                       |\
 			 BRx_MS_GPCM_P                  |\
 			 BRx_V)
 
-#define CFG_OR0_PRELIM  (P2SZ_TO_AM(CFG_BOOTROM_SIZE)   |\
+#define CONFIG_SYS_OR0_PRELIM  (P2SZ_TO_AM(CONFIG_SYS_BOOTROM_SIZE)   |\
 			 ORxG_CSNT                      |\
 			 ORxG_ACS_DIV1                  |\
 			 ORxG_SCY_3_CLK                 |\
@@ -520,12 +520,12 @@
 
 /* Bank 1 - FLASH
  */
-#define CFG_BR1_PRELIM  ((CFG_FLASH_BASE & BRx_BA_MSK)  |\
+#define CONFIG_SYS_BR1_PRELIM  ((CONFIG_SYS_FLASH_BASE & BRx_BA_MSK)  |\
 			 BRx_PS_64                      |\
 			 BRx_MS_GPCM_P                  |\
 			 BRx_V)
 
-#define CFG_OR1_PRELIM  (P2SZ_TO_AM(CFG_FLASH_SIZE)     |\
+#define CONFIG_SYS_OR1_PRELIM  (P2SZ_TO_AM(CONFIG_SYS_FLASH_SIZE)     |\
 			 ORxG_CSNT                      |\
 			 ORxG_ACS_DIV1                  |\
 			 ORxG_SCY_3_CLK                 |\
@@ -534,12 +534,12 @@
 #else /* CONFIG_BOOT_ROM */
 /* Bank 0 - FLASH
  */
-#define CFG_BR0_PRELIM  ((CFG_FLASH_BASE & BRx_BA_MSK)  |\
+#define CONFIG_SYS_BR0_PRELIM  ((CONFIG_SYS_FLASH_BASE & BRx_BA_MSK)  |\
 			 BRx_PS_64                      |\
 			 BRx_MS_GPCM_P                  |\
 			 BRx_V)
 
-#define CFG_OR0_PRELIM  (P2SZ_TO_AM(CFG_FLASH_SIZE)     |\
+#define CONFIG_SYS_OR0_PRELIM  (P2SZ_TO_AM(CONFIG_SYS_FLASH_SIZE)     |\
 			 ORxG_CSNT                      |\
 			 ORxG_ACS_DIV1                  |\
 			 ORxG_SCY_3_CLK                 |\
@@ -547,12 +547,12 @@
 
 /* Bank 1 - Boot ROM
  */
-#define CFG_BR1_PRELIM  ((CFG_BOOTROM_BASE & BRx_BA_MSK)|\
+#define CONFIG_SYS_BR1_PRELIM  ((CONFIG_SYS_BOOTROM_BASE & BRx_BA_MSK)|\
 			 BRx_PS_8                       |\
 			 BRx_MS_GPCM_P                  |\
 			 BRx_V)
 
-#define CFG_OR1_PRELIM  (P2SZ_TO_AM(CFG_BOOTROM_SIZE)   |\
+#define CONFIG_SYS_OR1_PRELIM  (P2SZ_TO_AM(CONFIG_SYS_BOOTROM_SIZE)   |\
 			 ORxG_CSNT                      |\
 			 ORxG_ACS_DIV1                  |\
 			 ORxG_SCY_3_CLK                 |\
@@ -563,25 +563,25 @@
 
 /* Bank 2 - 60x bus SDRAM
  */
-#ifndef CFG_RAMBOOT
-#define CFG_BR2_PRELIM  ((CFG_SDRAM_BASE & BRx_BA_MSK)  |\
+#ifndef CONFIG_SYS_RAMBOOT
+#define CONFIG_SYS_BR2_PRELIM  ((CONFIG_SYS_SDRAM_BASE & BRx_BA_MSK)  |\
 			 BRx_PS_64                      |\
 			 BRx_MS_SDRAM_P                 |\
 			 BRx_V)
 
-#define CFG_OR2_PRELIM	 CFG_OR2_9COL
+#define CONFIG_SYS_OR2_PRELIM	 CONFIG_SYS_OR2_9COL
 
-#define CFG_PSDMR	 CFG_PSDMR_9COL
-#endif /* CFG_RAMBOOT */
+#define CONFIG_SYS_PSDMR	 CONFIG_SYS_PSDMR_9COL
+#endif /* CONFIG_SYS_RAMBOOT */
 
 /* Bank 3 - Dual Ported SRAM
  */
-#define CFG_BR3_PRELIM  ((CFG_DPSRAM_BASE & BRx_BA_MSK) |\
+#define CONFIG_SYS_BR3_PRELIM  ((CONFIG_SYS_DPSRAM_BASE & BRx_BA_MSK) |\
 			 BRx_PS_16                      |\
 			 BRx_MS_GPCM_P                  |\
 			 BRx_V)
 
-#define CFG_OR3_PRELIM  (P2SZ_TO_AM(CFG_DPSRAM_SIZE)    |\
+#define CONFIG_SYS_OR3_PRELIM  (P2SZ_TO_AM(CONFIG_SYS_DPSRAM_SIZE)    |\
 			 ORxG_CSNT                      |\
 			 ORxG_ACS_DIV1                  |\
 			 ORxG_SCY_5_CLK                 |\
@@ -589,47 +589,47 @@
 
 /* Bank 4 - DiskOnChip
  */
-#define CFG_BR4_PRELIM  ((CFG_DOC_BASE & BRx_BA_MSK)    |\
+#define CONFIG_SYS_BR4_PRELIM  ((CONFIG_SYS_DOC_BASE & BRx_BA_MSK)    |\
 			 BRx_PS_8                       |\
 			 BRx_MS_GPCM_P                  |\
 			 BRx_V)
 
-#define CFG_OR4_PRELIM  (P2SZ_TO_AM(CFG_DOC_SIZE)       |\
+#define CONFIG_SYS_OR4_PRELIM  (P2SZ_TO_AM(CONFIG_SYS_DOC_SIZE)       |\
 			 ORxG_ACS_DIV2                  |\
 			 ORxG_SCY_5_CLK                 |\
 			 ORxU_EHTR_8IDLE)
 
 /* Bank 5 - FDC37C78 controller
  */
-#define CFG_BR5_PRELIM  ((CFG_FDC37C78_BASE & BRx_BA_MSK) |\
+#define CONFIG_SYS_BR5_PRELIM  ((CONFIG_SYS_FDC37C78_BASE & BRx_BA_MSK) |\
 			 BRx_PS_8                         |\
 			 BRx_MS_GPCM_P                    |\
 			 BRx_V)
 
-#define CFG_OR5_PRELIM  (P2SZ_TO_AM(CFG_FDC37C78_SIZE)    |\
+#define CONFIG_SYS_OR5_PRELIM  (P2SZ_TO_AM(CONFIG_SYS_FDC37C78_SIZE)    |\
 			 ORxG_ACS_DIV2                    |\
 			 ORxG_SCY_8_CLK                   |\
 			 ORxU_EHTR_8IDLE)
 
 /* Bank 6 - Board control registers
  */
-#define CFG_BR6_PRELIM  ((CFG_BCRS_BASE & BRx_BA_MSK)   |\
+#define CONFIG_SYS_BR6_PRELIM  ((CONFIG_SYS_BCRS_BASE & BRx_BA_MSK)   |\
 			 BRx_PS_8                       |\
 			 BRx_MS_GPCM_P                  |\
 			 BRx_V)
 
-#define CFG_OR6_PRELIM  (P2SZ_TO_AM(CFG_BCRS_SIZE)      |\
+#define CONFIG_SYS_OR6_PRELIM  (P2SZ_TO_AM(CONFIG_SYS_BCRS_SIZE)      |\
 			 ORxG_CSNT                      |\
 			 ORxG_SCY_5_CLK)
 
 /* Bank 7 - VME Extended Access Range
  */
-#define CFG_BR7_PRELIM  ((CFG_VMEEAR_BASE & BRx_BA_MSK) |\
+#define CONFIG_SYS_BR7_PRELIM  ((CONFIG_SYS_VMEEAR_BASE & BRx_BA_MSK) |\
 			 BRx_PS_32                      |\
 			 BRx_MS_GPCM_P                  |\
 			 BRx_V)
 
-#define CFG_OR7_PRELIM  (P2SZ_TO_AM(CFG_VMEEAR_SIZE)    |\
+#define CONFIG_SYS_OR7_PRELIM  (P2SZ_TO_AM(CONFIG_SYS_VMEEAR_SIZE)    |\
 			 ORxG_CSNT                      |\
 			 ORxG_ACS_DIV1                  |\
 			 ORxG_SCY_5_CLK                 |\
@@ -637,12 +637,12 @@
 
 /* Bank 8 - VME Standard Access Range
  */
-#define CFG_BR8_PRELIM  ((CFG_VMESAR_BASE & BRx_BA_MSK) |\
+#define CONFIG_SYS_BR8_PRELIM  ((CONFIG_SYS_VMESAR_BASE & BRx_BA_MSK) |\
 			 BRx_PS_16                      |\
 			 BRx_MS_GPCM_P                  |\
 			 BRx_V)
 
-#define CFG_OR8_PRELIM  (P2SZ_TO_AM(CFG_VMESAR_SIZE)    |\
+#define CONFIG_SYS_OR8_PRELIM  (P2SZ_TO_AM(CONFIG_SYS_VMESAR_SIZE)    |\
 			 ORxG_CSNT                      |\
 			 ORxG_ACS_DIV1                  |\
 			 ORxG_SCY_5_CLK                 |\
@@ -650,12 +650,12 @@
 
 /* Bank 9 - VME Short I/O Access Range
  */
-#define CFG_BR9_PRELIM  ((CFG_VMESIOAR_BASE & BRx_BA_MSK) |\
+#define CONFIG_SYS_BR9_PRELIM  ((CONFIG_SYS_VMESIOAR_BASE & BRx_BA_MSK) |\
 			 BRx_PS_16                        |\
 			 BRx_MS_GPCM_P                    |\
 			 BRx_V)
 
-#define CFG_OR9_PRELIM  (P2SZ_TO_AM(CFG_VMESIOAR_SIZE)    |\
+#define CONFIG_SYS_OR9_PRELIM  (P2SZ_TO_AM(CONFIG_SYS_VMESIOAR_SIZE)    |\
 			 ORxG_CSNT                        |\
 			 ORxG_ACS_DIV1                    |\
 			 ORxG_SCY_5_CLK                   |\
diff --git a/include/configs/CPU87.h b/include/configs/CPU87.h
index d325c4d07..489378a18 100644
--- a/include/configs/CPU87.h
+++ b/include/configs/CPU87.h
@@ -87,10 +87,10 @@
  * - RAM for BD/Buffers is on the 60x Bus (see 28-13)
  * - Enable Full Duplex in FSMR
  */
-# define CFG_CMXFCR_MASK	(CMXFCR_FC1|CMXFCR_RF1CS_MSK|CMXFCR_TF1CS_MSK)
-# define CFG_CMXFCR_VALUE	(CMXFCR_RF1CS_CLK11|CMXFCR_TF1CS_CLK12)
-# define CFG_CPMFCR_RAMTYPE	0
-# define CFG_FCC_PSMR		(FCC_PSMR_FDE|FCC_PSMR_LPB)
+# define CONFIG_SYS_CMXFCR_MASK	(CMXFCR_FC1|CMXFCR_RF1CS_MSK|CMXFCR_TF1CS_MSK)
+# define CONFIG_SYS_CMXFCR_VALUE	(CMXFCR_RF1CS_CLK11|CMXFCR_TF1CS_CLK12)
+# define CONFIG_SYS_CPMFCR_RAMTYPE	0
+# define CONFIG_SYS_FCC_PSMR		(FCC_PSMR_FDE|FCC_PSMR_LPB)
 
 #elif defined(CONFIG_ETHER_ON_FCC) && (CONFIG_ETHER_INDEX == 2)
 
@@ -100,10 +100,10 @@
  * - RAM for BD/Buffers is on the 60x Bus (see 28-13)
  * - Enable Full Duplex in FSMR
  */
-# define CFG_CMXFCR_MASK	(CMXFCR_FC2|CMXFCR_RF2CS_MSK|CMXFCR_TF2CS_MSK)
-# define CFG_CMXFCR_VALUE	(CMXFCR_RF2CS_CLK13|CMXFCR_TF2CS_CLK14)
-# define CFG_CPMFCR_RAMTYPE	0
-# define CFG_FCC_PSMR		(FCC_PSMR_FDE|FCC_PSMR_LPB)
+# define CONFIG_SYS_CMXFCR_MASK	(CMXFCR_FC2|CMXFCR_RF2CS_MSK|CMXFCR_TF2CS_MSK)
+# define CONFIG_SYS_CMXFCR_VALUE	(CMXFCR_RF2CS_CLK13|CMXFCR_TF2CS_CLK14)
+# define CONFIG_SYS_CPMFCR_RAMTYPE	0
+# define CONFIG_SYS_FCC_PSMR		(FCC_PSMR_FDE|FCC_PSMR_LPB)
 
 #endif /* CONFIG_ETHER_ON_FCC, CONFIG_ETHER_INDEX */
 
@@ -129,8 +129,8 @@
  */
 #define CONFIG_SOFT_I2C			/* Software I2C support enabled */
 
-# define CFG_I2C_SPEED		50000
-# define CFG_I2C_SLAVE		0xFE
+# define CONFIG_SYS_I2C_SPEED		50000
+# define CONFIG_SYS_I2C_SLAVE		0xFE
 /*
  * Software (bit-bang) I2C driver configuration
  */
@@ -145,7 +145,7 @@
 #define I2C_DELAY	udelay(5)	/* 1/4 I2C clock duration */
 
 #define CONFIG_RTC_PCF8563
-#define CFG_I2C_RTC_ADDR	0x51
+#define CONFIG_SYS_I2C_RTC_ADDR	0x51
 
 #undef	CONFIG_WATCHDOG			/* watchdog disabled		*/
 
@@ -153,17 +153,17 @@
  * Disk-On-Chip configuration
  */
 
-#define CFG_MAX_DOC_DEVICE	1	/* Max number of DOC devices	*/
+#define CONFIG_SYS_MAX_DOC_DEVICE	1	/* Max number of DOC devices	*/
 
-#define CFG_DOC_SUPPORT_2000
-#define CFG_DOC_SUPPORT_MILLENNIUM
+#define CONFIG_SYS_DOC_SUPPORT_2000
+#define CONFIG_SYS_DOC_SUPPORT_MILLENNIUM
 
 /*-----------------------------------------------------------------------
  * Miscellaneous configuration options
  */
 
 #define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
-#undef	CFG_LOADS_BAUD_CHANGE		/* don't allow baudrate change	*/
+#undef	CONFIG_SYS_LOADS_BAUD_CHANGE		/* don't allow baudrate change	*/
 
 /*
  * BOOTP options
@@ -196,27 +196,27 @@
 /*
  * Miscellaneous configurable options
  */
-#define CFG_LONGHELP			/* undef to save memory		*/
-#define CFG_PROMPT	"=> "		/* Monitor Command Prompt	*/
+#define CONFIG_SYS_LONGHELP			/* undef to save memory		*/
+#define CONFIG_SYS_PROMPT	"=> "		/* Monitor Command Prompt	*/
 #if defined(CONFIG_CMD_KGDB)
-#define CFG_CBSIZE	1024		/* Console I/O Buffer Size	*/
+#define CONFIG_SYS_CBSIZE	1024		/* Console I/O Buffer Size	*/
 #else
-#define CFG_CBSIZE	256		/* Console I/O Buffer Size	*/
+#define CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size	*/
 #endif
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define CFG_MAXARGS	16		/* max number of command args	*/
-#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS	16		/* max number of command args	*/
+#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
 
-#define CFG_MEMTEST_START	0x0400000	/* memtest works on	*/
-#define CFG_MEMTEST_END 0x0C00000	/* 4 ... 12 MB in DRAM	*/
+#define CONFIG_SYS_MEMTEST_START	0x0400000	/* memtest works on	*/
+#define CONFIG_SYS_MEMTEST_END 0x0C00000	/* 4 ... 12 MB in DRAM	*/
 
-#define CFG_LOAD_ADDR	0x100000	/* default load address */
+#define CONFIG_SYS_LOAD_ADDR	0x100000	/* default load address */
 
-#define CFG_HZ		1000		/* decrementer freq: 1 ms ticks */
+#define CONFIG_SYS_HZ		1000		/* decrementer freq: 1 ms ticks */
 
-#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
 
-#define CFG_RESET_ADDRESS 0xFFF00100	/* "bad" address		*/
+#define CONFIG_SYS_RESET_ADDRESS 0xFFF00100	/* "bad" address		*/
 
 #define CONFIG_LOOPW
 
@@ -225,137 +225,137 @@
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define CFG_BOOTMAPSZ		(8 << 20) /* Initial Memory map for Linux */
+#define CONFIG_SYS_BOOTMAPSZ		(8 << 20) /* Initial Memory map for Linux */
 
 /*-----------------------------------------------------------------------
  * Flash configuration
  */
 
-#define CFG_BOOTROM_BASE	0xFF800000
-#define CFG_BOOTROM_SIZE	0x00080000
-#define CFG_FLASH_BASE		0xFF000000
-#define CFG_FLASH_SIZE		0x00800000
+#define CONFIG_SYS_BOOTROM_BASE	0xFF800000
+#define CONFIG_SYS_BOOTROM_SIZE	0x00080000
+#define CONFIG_SYS_FLASH_BASE		0xFF000000
+#define CONFIG_SYS_FLASH_SIZE		0x00800000
 
 /*-----------------------------------------------------------------------
  * FLASH organization
  */
-#define CFG_MAX_FLASH_BANKS	2	/* max num of memory banks	*/
-#define CFG_MAX_FLASH_SECT	135	/* max num of sects on one chip */
+#define CONFIG_SYS_MAX_FLASH_BANKS	2	/* max num of memory banks	*/
+#define CONFIG_SYS_MAX_FLASH_SECT	135	/* max num of sects on one chip */
 
-#define CFG_FLASH_ERASE_TOUT	240000	/* Flash Erase Timeout (in ms)	*/
-#define CFG_FLASH_WRITE_TOUT	500	/* Flash Write Timeout (in ms)	*/
+#define CONFIG_SYS_FLASH_ERASE_TOUT	240000	/* Flash Erase Timeout (in ms)	*/
+#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Flash Write Timeout (in ms)	*/
 
 /*-----------------------------------------------------------------------
  * Other areas to be mapped
  */
 
 /* CS3: Dual ported SRAM */
-#define CFG_DPSRAM_BASE		0x40000000
-#define CFG_DPSRAM_SIZE		0x00100000
+#define CONFIG_SYS_DPSRAM_BASE		0x40000000
+#define CONFIG_SYS_DPSRAM_SIZE		0x00100000
 
 /* CS4: DiskOnChip */
-#define CFG_DOC_BASE		0xF4000000
-#define CFG_DOC_SIZE		0x00100000
+#define CONFIG_SYS_DOC_BASE		0xF4000000
+#define CONFIG_SYS_DOC_SIZE		0x00100000
 
 /* CS5: FDC37C78 controller */
-#define CFG_FDC37C78_BASE	0xF1000000
-#define CFG_FDC37C78_SIZE	0x00100000
+#define CONFIG_SYS_FDC37C78_BASE	0xF1000000
+#define CONFIG_SYS_FDC37C78_SIZE	0x00100000
 
 /* CS6: Board configuration registers */
-#define CFG_BCRS_BASE		0xF2000000
-#define CFG_BCRS_SIZE		0x00010000
+#define CONFIG_SYS_BCRS_BASE		0xF2000000
+#define CONFIG_SYS_BCRS_SIZE		0x00010000
 
 /* CS7: VME Extended Access Range */
-#define CFG_VMEEAR_BASE		0x60000000
-#define CFG_VMEEAR_SIZE		0x01000000
+#define CONFIG_SYS_VMEEAR_BASE		0x60000000
+#define CONFIG_SYS_VMEEAR_SIZE		0x01000000
 
 /* CS8: VME Standard Access Range */
-#define CFG_VMESAR_BASE		0xFE000000
-#define CFG_VMESAR_SIZE		0x01000000
+#define CONFIG_SYS_VMESAR_BASE		0xFE000000
+#define CONFIG_SYS_VMESAR_SIZE		0x01000000
 
 /* CS9: VME Short I/O Access Range */
-#define CFG_VMESIOAR_BASE	0xFD000000
-#define CFG_VMESIOAR_SIZE	0x01000000
+#define CONFIG_SYS_VMESIOAR_BASE	0xFD000000
+#define CONFIG_SYS_VMESIOAR_SIZE	0x01000000
 
 /*-----------------------------------------------------------------------
  * Hard Reset Configuration Words
  *
- * if you change bits in the HRCW, you must also change the CFG_*
+ * if you change bits in the HRCW, you must also change the CONFIG_SYS_*
  * defines for the various registers affected by the HRCW e.g. changing
- * HRCW_DPPCxx requires you to also change CFG_SIUMCR.
+ * HRCW_DPPCxx requires you to also change CONFIG_SYS_SIUMCR.
  */
 #if defined(CONFIG_BOOT_ROM)
-#define CFG_HRCW_MASTER		(HRCW_CIP | HRCW_ISB100 | HRCW_BMS | \
+#define CONFIG_SYS_HRCW_MASTER		(HRCW_CIP | HRCW_ISB100 | HRCW_BMS | \
 				 HRCW_BPS01 | HRCW_CS10PC01)
 #else
-#define CFG_HRCW_MASTER		(HRCW_CIP | HRCW_ISB100 | HRCW_BMS | HRCW_CS10PC01)
+#define CONFIG_SYS_HRCW_MASTER		(HRCW_CIP | HRCW_ISB100 | HRCW_BMS | HRCW_CS10PC01)
 #endif
 
 /* no slaves so just fill with zeros */
-#define CFG_HRCW_SLAVE1		0
-#define CFG_HRCW_SLAVE2		0
-#define CFG_HRCW_SLAVE3		0
-#define CFG_HRCW_SLAVE4		0
-#define CFG_HRCW_SLAVE5		0
-#define CFG_HRCW_SLAVE6		0
-#define CFG_HRCW_SLAVE7		0
+#define CONFIG_SYS_HRCW_SLAVE1		0
+#define CONFIG_SYS_HRCW_SLAVE2		0
+#define CONFIG_SYS_HRCW_SLAVE3		0
+#define CONFIG_SYS_HRCW_SLAVE4		0
+#define CONFIG_SYS_HRCW_SLAVE5		0
+#define CONFIG_SYS_HRCW_SLAVE6		0
+#define CONFIG_SYS_HRCW_SLAVE7		0
 
 /*-----------------------------------------------------------------------
  * Internal Memory Mapped Register
  */
-#define CFG_IMMR		0xF0000000
+#define CONFIG_SYS_IMMR		0xF0000000
 
 /*-----------------------------------------------------------------------
  * Definitions for initial stack pointer and data area (in DPRAM)
  */
-#define CFG_INIT_RAM_ADDR	CFG_IMMR
-#define CFG_INIT_RAM_END	0x4000	/* End of used area in DPRAM	*/
-#define CFG_GBL_DATA_SIZE	128 /* size in bytes reserved for initial data*/
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_IMMR
+#define CONFIG_SYS_INIT_RAM_END	0x4000	/* End of used area in DPRAM	*/
+#define CONFIG_SYS_GBL_DATA_SIZE	128 /* size in bytes reserved for initial data*/
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
 /*-----------------------------------------------------------------------
  * Start addresses for the final memory configuration
  * (Set up by the startup code)
- * Please note that CFG_SDRAM_BASE _must_ start at 0
+ * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
  *
- * 60x SDRAM is mapped at CFG_SDRAM_BASE.
+ * 60x SDRAM is mapped at CONFIG_SYS_SDRAM_BASE.
  */
-#define CFG_SDRAM_BASE		0x00000000
-#define CFG_SDRAM_MAX_SIZE	0x08000000	/* max. 128 MB		*/
-#define CFG_MONITOR_BASE	TEXT_BASE
-#define CFG_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor */
-#define CFG_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()*/
+#define CONFIG_SYS_SDRAM_BASE		0x00000000
+#define CONFIG_SYS_SDRAM_MAX_SIZE	0x08000000	/* max. 128 MB		*/
+#define CONFIG_SYS_MONITOR_BASE	TEXT_BASE
+#define CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor */
+#define CONFIG_SYS_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()*/
 
-#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
-# define CFG_RAMBOOT
+#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
+# define CONFIG_SYS_RAMBOOT
 #endif
 
 #ifdef	CONFIG_PCI
 #define CONFIG_PCI_PNP
 #define CONFIG_EEPRO100
-#define CFG_RX_ETH_BUFFER	8		/* use 8 rx buffer on eepro100	*/
+#define CONFIG_SYS_RX_ETH_BUFFER	8		/* use 8 rx buffer on eepro100	*/
 #endif
 
 #if 0
 /* environment is in Flash */
-#define CFG_ENV_IS_IN_FLASH	1
+#define CONFIG_ENV_IS_IN_FLASH	1
 #ifdef CONFIG_BOOT_ROM
-# define CFG_ENV_ADDR		(CFG_FLASH_BASE+0x70000)
-# define CFG_ENV_SIZE		0x10000
-# define CFG_ENV_SECT_SIZE	0x10000
+# define CONFIG_ENV_ADDR		(CONFIG_SYS_FLASH_BASE+0x70000)
+# define CONFIG_ENV_SIZE		0x10000
+# define CONFIG_ENV_SECT_SIZE	0x10000
 #endif
 #else
 /* environment is in EEPROM */
-#define CFG_ENV_IS_IN_EEPROM	1
-#define CFG_I2C_EEPROM_ADDR	0x58	/* EEPROM X24C16		*/
-#define CFG_I2C_EEPROM_ADDR_LEN 1
+#define CONFIG_ENV_IS_IN_EEPROM	1
+#define CONFIG_SYS_I2C_EEPROM_ADDR	0x58	/* EEPROM X24C16		*/
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
 /* mask of address bits that overflow into the "EEPROM chip address"	*/
-#define CFG_I2C_EEPROM_ADDR_OVERFLOW	0x07
-#define CFG_EEPROM_PAGE_WRITE_BITS	4
-#define CFG_EEPROM_PAGE_WRITE_DELAY_MS	10	/* and takes up to 10 msec */
-#define CFG_ENV_OFFSET		512
-#define CFG_ENV_SIZE		(2048 - 512)
+#define CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW	0x07
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS	4
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	10	/* and takes up to 10 msec */
+#define CONFIG_ENV_OFFSET		512
+#define CONFIG_ENV_SIZE		(2048 - 512)
 #endif
 
 /*
@@ -370,9 +370,9 @@
 /*-----------------------------------------------------------------------
  * Cache Configuration
  */
-#define CFG_CACHELINE_SIZE	32	/* For MPC8260 CPU		*/
+#define CONFIG_SYS_CACHELINE_SIZE	32	/* For MPC8260 CPU		*/
 #if defined(CONFIG_CMD_KGDB)
-# define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value */
+# define CONFIG_SYS_CACHELINE_SHIFT	5	/* log base 2 of the above value */
 #endif
 
 /*-----------------------------------------------------------------------
@@ -385,30 +385,30 @@
  *
  * HID1 has only read-only information - nothing to set.
  */
-#define CFG_HID0_INIT	(HID0_ICE|HID0_DCE|HID0_ICFI|\
+#define CONFIG_SYS_HID0_INIT	(HID0_ICE|HID0_DCE|HID0_ICFI|\
 			 HID0_DCI|HID0_IFEM|HID0_ABE)
-#define CFG_HID0_FINAL	(HID0_IFEM|HID0_ABE)
-#define CFG_HID2	0
+#define CONFIG_SYS_HID0_FINAL	(HID0_IFEM|HID0_ABE)
+#define CONFIG_SYS_HID2	0
 
 /*-----------------------------------------------------------------------
  * RMR - Reset Mode Register					 5-5
  *-----------------------------------------------------------------------
  * turn on Checkstop Reset Enable
  */
-#define CFG_RMR		RMR_CSRE
+#define CONFIG_SYS_RMR		RMR_CSRE
 
 /*-----------------------------------------------------------------------
  * BCR - Bus Configuration					 4-25
  *-----------------------------------------------------------------------
  */
 #define BCR_APD01	0x10000000
-#define CFG_BCR		(BCR_APD01|BCR_ETM|BCR_LETM)	/* 8260 mode */
+#define CONFIG_SYS_BCR		(BCR_APD01|BCR_ETM|BCR_LETM)	/* 8260 mode */
 
 /*-----------------------------------------------------------------------
  * SIUMCR - SIU Module Configuration				 4-31
  *-----------------------------------------------------------------------
  */
-#define CFG_SIUMCR	(SIUMCR_BBD|SIUMCR_DPPC00|SIUMCR_APPC10|\
+#define CONFIG_SYS_SIUMCR	(SIUMCR_BBD|SIUMCR_DPPC00|SIUMCR_APPC10|\
 			 SIUMCR_CS10PC01|SIUMCR_BCTLC10)
 
 /*-----------------------------------------------------------------------
@@ -418,10 +418,10 @@
  * Watchdog & Bus Monitor Timer max, 60x Bus Monitor enable
  */
 #if defined(CONFIG_WATCHDOG)
-#define CFG_SYPCR	(SYPCR_SWTC|SYPCR_BMT|SYPCR_PBME|SYPCR_LBME|\
+#define CONFIG_SYS_SYPCR	(SYPCR_SWTC|SYPCR_BMT|SYPCR_PBME|SYPCR_LBME|\
 			 SYPCR_SWRI|SYPCR_SWP|SYPCR_SWE)
 #else
-#define CFG_SYPCR	(SYPCR_SWTC|SYPCR_BMT|SYPCR_PBME|SYPCR_LBME|\
+#define CONFIG_SYS_SYPCR	(SYPCR_SWTC|SYPCR_BMT|SYPCR_PBME|SYPCR_LBME|\
 			 SYPCR_SWRI|SYPCR_SWP)
 #endif /* CONFIG_WATCHDOG */
 
@@ -431,7 +431,7 @@
  * Clear once per Second and Alarm Interrupt Status, Set 32KHz timersclk,
  * and enable Time Counter
  */
-#define CFG_TMCNTSC	(TMCNTSC_SEC|TMCNTSC_ALR|TMCNTSC_TCF|TMCNTSC_TCE)
+#define CONFIG_SYS_TMCNTSC	(TMCNTSC_SEC|TMCNTSC_ALR|TMCNTSC_TCF|TMCNTSC_TCE)
 
 /*-----------------------------------------------------------------------
  * PISCR - Periodic Interrupt Status and Control		 4-42
@@ -439,22 +439,22 @@
  * Clear Periodic Interrupt Status, Set 32KHz timersclk, and enable
  * Periodic timer
  */
-#define CFG_PISCR	(PISCR_PS|PISCR_PTF|PISCR_PTE)
+#define CONFIG_SYS_PISCR	(PISCR_PS|PISCR_PTF|PISCR_PTE)
 
 /*-----------------------------------------------------------------------
  * SCCR - System Clock Control					 9-8
  *-----------------------------------------------------------------------
  * Ensure DFBRG is Divide by 16
  */
-#define CFG_SCCR	SCCR_DFBRG01
+#define CONFIG_SYS_SCCR	SCCR_DFBRG01
 
 /*-----------------------------------------------------------------------
  * RCCR - RISC Controller Configuration				13-7
  *-----------------------------------------------------------------------
  */
-#define CFG_RCCR	0
+#define CONFIG_SYS_RCCR	0
 
-#define CFG_MIN_AM_MASK 0xC0000000
+#define CONFIG_SYS_MIN_AM_MASK 0xC0000000
 
 /*
  * we use the same values for 32 MB, 128 MB and 256 MB SDRAM
@@ -465,13 +465,13 @@
  * MPTPR - Memory Refresh Timer Prescaler Register		10-18
  *-----------------------------------------------------------------------
  */
-#define CFG_MPTPR	0x2000
+#define CONFIG_SYS_MPTPR	0x2000
 
 /*-----------------------------------------------------------------------
  * PSRT - Refresh Timer Register				10-16
  *-----------------------------------------------------------------------
  */
-#define CFG_PSRT	0x16
+#define CONFIG_SYS_PSRT	0x16
 
 /*-----------------------------------------------------------------------
  * PSRT - SDRAM Mode Register					10-10
@@ -480,12 +480,12 @@
 
 	/* SDRAM initialization values for 8-column chips
 	 */
-#define CFG_OR2_8COL	(CFG_MIN_AM_MASK		|\
+#define CONFIG_SYS_OR2_8COL	(CONFIG_SYS_MIN_AM_MASK		|\
 			 ORxS_BPD_4			|\
 			 ORxS_ROWST_PBI0_A9		|\
 			 ORxS_NUMR_12)
 
-#define CFG_PSDMR_8COL	(PSDMR_SDAM_A13_IS_A5		|\
+#define CONFIG_SYS_PSDMR_8COL	(PSDMR_SDAM_A13_IS_A5		|\
 			 PSDMR_BSMA_A14_A16		|\
 			 PSDMR_SDA10_PBI0_A10		|\
 			 PSDMR_RFRC_7_CLK		|\
@@ -497,12 +497,12 @@
 
 	/* SDRAM initialization values for 9-column chips
 	 */
-#define CFG_OR2_9COL	(CFG_MIN_AM_MASK		|\
+#define CONFIG_SYS_OR2_9COL	(CONFIG_SYS_MIN_AM_MASK		|\
 			 ORxS_BPD_4			|\
 			 ORxS_ROWST_PBI0_A7		|\
 			 ORxS_NUMR_13)
 
-#define CFG_PSDMR_9COL	(PSDMR_SDAM_A14_IS_A5		|\
+#define CONFIG_SYS_PSDMR_9COL	(PSDMR_SDAM_A14_IS_A5		|\
 			 PSDMR_BSMA_A13_A15		|\
 			 PSDMR_SDA10_PBI0_A9		|\
 			 PSDMR_RFRC_7_CLK		|\
@@ -514,12 +514,12 @@
 
 	/* SDRAM initialization values for 10-column chips
 	 */
-#define CFG_OR2_10COL	(CFG_MIN_AM_MASK		|\
+#define CONFIG_SYS_OR2_10COL	(CONFIG_SYS_MIN_AM_MASK		|\
 			 ORxS_BPD_4			|\
 			 ORxS_ROWST_PBI1_A4		|\
 			 ORxS_NUMR_13)
 
-#define CFG_PSDMR_10COL	(PSDMR_PBI			|\
+#define CONFIG_SYS_PSDMR_10COL	(PSDMR_PBI			|\
 			 PSDMR_SDAM_A17_IS_A5		|\
 			 PSDMR_BSMA_A13_A15		|\
 			 PSDMR_SDA10_PBI1_A6		|\
@@ -541,17 +541,17 @@
  *
  */
 
-#define CFG_MRS_OFFS	0x00000000
+#define CONFIG_SYS_MRS_OFFS	0x00000000
 
 #ifdef CONFIG_BOOT_ROM
 /* Bank 0 - Boot ROM
  */
-#define CFG_BR0_PRELIM	((CFG_BOOTROM_BASE & BRx_BA_MSK)|\
+#define CONFIG_SYS_BR0_PRELIM	((CONFIG_SYS_BOOTROM_BASE & BRx_BA_MSK)|\
 			 BRx_PS_8			|\
 			 BRx_MS_GPCM_P			|\
 			 BRx_V)
 
-#define CFG_OR0_PRELIM	(P2SZ_TO_AM(CFG_BOOTROM_SIZE)	|\
+#define CONFIG_SYS_OR0_PRELIM	(P2SZ_TO_AM(CONFIG_SYS_BOOTROM_SIZE)	|\
 			 ORxG_CSNT			|\
 			 ORxG_ACS_DIV1			|\
 			 ORxG_SCY_5_CLK			|\
@@ -559,12 +559,12 @@
 
 /* Bank 1 - FLASH
  */
-#define CFG_BR1_PRELIM	((CFG_FLASH_BASE & BRx_BA_MSK)	|\
+#define CONFIG_SYS_BR1_PRELIM	((CONFIG_SYS_FLASH_BASE & BRx_BA_MSK)	|\
 			 BRx_PS_64			|\
 			 BRx_MS_GPCM_P			|\
 			 BRx_V)
 
-#define CFG_OR1_PRELIM	(P2SZ_TO_AM(CFG_FLASH_SIZE)	|\
+#define CONFIG_SYS_OR1_PRELIM	(P2SZ_TO_AM(CONFIG_SYS_FLASH_SIZE)	|\
 			 ORxG_CSNT			|\
 			 ORxG_ACS_DIV1			|\
 			 ORxG_SCY_5_CLK			|\
@@ -573,12 +573,12 @@
 #else /* CONFIG_BOOT_ROM */
 /* Bank 0 - FLASH
  */
-#define CFG_BR0_PRELIM	((CFG_FLASH_BASE & BRx_BA_MSK)	|\
+#define CONFIG_SYS_BR0_PRELIM	((CONFIG_SYS_FLASH_BASE & BRx_BA_MSK)	|\
 			 BRx_PS_64			|\
 			 BRx_MS_GPCM_P			|\
 			 BRx_V)
 
-#define CFG_OR0_PRELIM	(P2SZ_TO_AM(CFG_FLASH_SIZE)	|\
+#define CONFIG_SYS_OR0_PRELIM	(P2SZ_TO_AM(CONFIG_SYS_FLASH_SIZE)	|\
 			 ORxG_CSNT			|\
 			 ORxG_ACS_DIV1			|\
 			 ORxG_SCY_5_CLK			|\
@@ -586,12 +586,12 @@
 
 /* Bank 1 - Boot ROM
  */
-#define CFG_BR1_PRELIM	((CFG_BOOTROM_BASE & BRx_BA_MSK)|\
+#define CONFIG_SYS_BR1_PRELIM	((CONFIG_SYS_BOOTROM_BASE & BRx_BA_MSK)|\
 			 BRx_PS_8			|\
 			 BRx_MS_GPCM_P			|\
 			 BRx_V)
 
-#define CFG_OR1_PRELIM	(P2SZ_TO_AM(CFG_BOOTROM_SIZE)	|\
+#define CONFIG_SYS_OR1_PRELIM	(P2SZ_TO_AM(CONFIG_SYS_BOOTROM_SIZE)	|\
 			 ORxG_CSNT			|\
 			 ORxG_ACS_DIV1			|\
 			 ORxG_SCY_5_CLK			|\
@@ -602,25 +602,25 @@
 
 /* Bank 2 - 60x bus SDRAM
  */
-#ifndef CFG_RAMBOOT
-#define CFG_BR2_PRELIM	((CFG_SDRAM_BASE & BRx_BA_MSK)	|\
+#ifndef CONFIG_SYS_RAMBOOT
+#define CONFIG_SYS_BR2_PRELIM	((CONFIG_SYS_SDRAM_BASE & BRx_BA_MSK)	|\
 			 BRx_PS_64			|\
 			 BRx_MS_SDRAM_P			|\
 			 BRx_V)
 
-#define CFG_OR2_PRELIM	 CFG_OR2_8COL
+#define CONFIG_SYS_OR2_PRELIM	 CONFIG_SYS_OR2_8COL
 
-#define CFG_PSDMR	 CFG_PSDMR_8COL
-#endif /* CFG_RAMBOOT */
+#define CONFIG_SYS_PSDMR	 CONFIG_SYS_PSDMR_8COL
+#endif /* CONFIG_SYS_RAMBOOT */
 
 /* Bank 3 - Dual Ported SRAM
  */
-#define CFG_BR3_PRELIM	((CFG_DPSRAM_BASE & BRx_BA_MSK) |\
+#define CONFIG_SYS_BR3_PRELIM	((CONFIG_SYS_DPSRAM_BASE & BRx_BA_MSK) |\
 			 BRx_PS_16			|\
 			 BRx_MS_GPCM_P			|\
 			 BRx_V)
 
-#define CFG_OR3_PRELIM	(P2SZ_TO_AM(CFG_DPSRAM_SIZE)	|\
+#define CONFIG_SYS_OR3_PRELIM	(P2SZ_TO_AM(CONFIG_SYS_DPSRAM_SIZE)	|\
 			 ORxG_CSNT			|\
 			 ORxG_ACS_DIV1			|\
 			 ORxG_SCY_7_CLK			|\
@@ -628,12 +628,12 @@
 
 /* Bank 4 - DiskOnChip
  */
-#define CFG_BR4_PRELIM	((CFG_DOC_BASE & BRx_BA_MSK)	|\
+#define CONFIG_SYS_BR4_PRELIM	((CONFIG_SYS_DOC_BASE & BRx_BA_MSK)	|\
 			 BRx_PS_8			|\
 			 BRx_MS_GPCM_P			|\
 			 BRx_V)
 
-#define CFG_OR4_PRELIM	(P2SZ_TO_AM(CFG_DOC_SIZE)	|\
+#define CONFIG_SYS_OR4_PRELIM	(P2SZ_TO_AM(CONFIG_SYS_DOC_SIZE)	|\
 			 ORxG_CSNT			|\
 			 ORxG_ACS_DIV2			|\
 			 ORxG_SCY_9_CLK			|\
@@ -641,35 +641,35 @@
 
 /* Bank 5 - FDC37C78 controller
  */
-#define CFG_BR5_PRELIM	((CFG_FDC37C78_BASE & BRx_BA_MSK) |\
+#define CONFIG_SYS_BR5_PRELIM	((CONFIG_SYS_FDC37C78_BASE & BRx_BA_MSK) |\
 			 BRx_PS_8			  |\
 			 BRx_MS_GPCM_P			  |\
 			 BRx_V)
 
-#define CFG_OR5_PRELIM	(P2SZ_TO_AM(CFG_FDC37C78_SIZE)	  |\
+#define CONFIG_SYS_OR5_PRELIM	(P2SZ_TO_AM(CONFIG_SYS_FDC37C78_SIZE)	  |\
 			 ORxG_ACS_DIV2			  |\
 			 ORxG_SCY_10_CLK		  |\
 			 ORxU_EHTR_8IDLE)
 
 /* Bank 6 - Board control registers
  */
-#define CFG_BR6_PRELIM	((CFG_BCRS_BASE & BRx_BA_MSK)	|\
+#define CONFIG_SYS_BR6_PRELIM	((CONFIG_SYS_BCRS_BASE & BRx_BA_MSK)	|\
 			 BRx_PS_8			|\
 			 BRx_MS_GPCM_P			|\
 			 BRx_V)
 
-#define CFG_OR6_PRELIM	(P2SZ_TO_AM(CFG_BCRS_SIZE)	|\
+#define CONFIG_SYS_OR6_PRELIM	(P2SZ_TO_AM(CONFIG_SYS_BCRS_SIZE)	|\
 			 ORxG_CSNT			|\
 			 ORxG_SCY_7_CLK)
 
 /* Bank 7 - VME Extended Access Range
  */
-#define CFG_BR7_PRELIM	((CFG_VMEEAR_BASE & BRx_BA_MSK) |\
+#define CONFIG_SYS_BR7_PRELIM	((CONFIG_SYS_VMEEAR_BASE & BRx_BA_MSK) |\
 			 BRx_PS_32			|\
 			 BRx_MS_GPCM_P			|\
 			 BRx_V)
 
-#define CFG_OR7_PRELIM	(P2SZ_TO_AM(CFG_VMEEAR_SIZE)	|\
+#define CONFIG_SYS_OR7_PRELIM	(P2SZ_TO_AM(CONFIG_SYS_VMEEAR_SIZE)	|\
 			 ORxG_CSNT			|\
 			 ORxG_ACS_DIV1			|\
 			 ORxG_SCY_7_CLK			|\
@@ -677,12 +677,12 @@
 
 /* Bank 8 - VME Standard Access Range
  */
-#define CFG_BR8_PRELIM	((CFG_VMESAR_BASE & BRx_BA_MSK) |\
+#define CONFIG_SYS_BR8_PRELIM	((CONFIG_SYS_VMESAR_BASE & BRx_BA_MSK) |\
 			 BRx_PS_16			|\
 			 BRx_MS_GPCM_P			|\
 			 BRx_V)
 
-#define CFG_OR8_PRELIM	(P2SZ_TO_AM(CFG_VMESAR_SIZE)	|\
+#define CONFIG_SYS_OR8_PRELIM	(P2SZ_TO_AM(CONFIG_SYS_VMESAR_SIZE)	|\
 			 ORxG_CSNT			|\
 			 ORxG_ACS_DIV1			|\
 			 ORxG_SCY_7_CLK			|\
@@ -690,12 +690,12 @@
 
 /* Bank 9 - VME Short I/O Access Range
  */
-#define CFG_BR9_PRELIM	((CFG_VMESIOAR_BASE & BRx_BA_MSK) |\
+#define CONFIG_SYS_BR9_PRELIM	((CONFIG_SYS_VMESIOAR_BASE & BRx_BA_MSK) |\
 			 BRx_PS_16			  |\
 			 BRx_MS_GPCM_P			  |\
 			 BRx_V)
 
-#define CFG_OR9_PRELIM	(P2SZ_TO_AM(CFG_VMESIOAR_SIZE)	  |\
+#define CONFIG_SYS_OR9_PRELIM	(P2SZ_TO_AM(CONFIG_SYS_VMESIOAR_SIZE)	  |\
 			 ORxG_CSNT			  |\
 			 ORxG_ACS_DIV1			  |\
 			 ORxG_SCY_7_CLK			  |\
diff --git a/include/configs/CRAYL1.h b/include/configs/CRAYL1.h
index 604779a69..f1608e145 100644
--- a/include/configs/CRAYL1.h
+++ b/include/configs/CRAYL1.h
@@ -39,6 +39,8 @@
 #define CONFIG_SYS_CLK_FREQ 25000000
 #define CONFIG_BAUDRATE		9600
 #define CONFIG_BOOTDELAY	5	/* autoboot after 5 seconds	*/
+
+#define CONFIG_PPC4xx_EMAC
 #define CONFIG_MII		    1	/* MII PHY management */
 #define	CONFIG_PHY_ADDR		1	/* PHY address; handling of ENET */
 #define CONFIG_BOARD_EARLY_INIT_F 1	/* early setup for 405gp */
@@ -53,7 +55,7 @@
 
 /* Bootcmd is overridden by the bootscript in board/cray/L1
  */
-#define	CFG_AUTOLOAD		"no"
+#define	CONFIG_SYS_AUTOLOAD		"no"
 #define CONFIG_BOOTCOMMAND	"dhcp"
 
 /*
@@ -63,15 +65,15 @@
  */
 #define CONFIG_HARD_I2C         1		/* hardware support for i2c */
 #define CONFIG_SDRAM_BANK0		1
-#define CFG_I2C_SPEED		    400000	/* I2C speed and slave address	*/
-#define CFG_I2C_SLAVE		    0x7F
-#define CFG_I2C_EEPROM_ADDR     0x57
-#define CFG_I2C_EEPROM_ADDR_LEN 1
+#define CONFIG_SYS_I2C_SPEED		    400000	/* I2C speed and slave address	*/
+#define CONFIG_SYS_I2C_SLAVE		    0x7F
+#define CONFIG_SYS_I2C_EEPROM_ADDR     0x57
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
 #define CONFIG_IDENT_STRING     "Cray L1"
 #define CONFIG_ENV_OVERWRITE     1
-#define	CFG_HZ		             1000	/* decrementer freq: 1 ms ticks	*/
-#define CFG_HUSH_PARSER			1
-#define CFG_PROMPT_HUSH_PS2		"> "
+#define	CONFIG_SYS_HZ		             1000	/* decrementer freq: 1 ms ticks	*/
+#define CONFIG_SYS_HUSH_PARSER			1
+#define CONFIG_SYS_PROMPT_HUSH_PS2		"> "
 #define CONFIG_AUTOSCRIPT		1
 
 
@@ -123,73 +125,73 @@
  * from the DCR anyway, so its kinda-tied to the above ref. clock which in turn
  * drives the system clock.
  */
-#define CFG_BASE_BAUD       403225
-#define CFG_BAUDRATE_TABLE  \
+#define CONFIG_SYS_BASE_BAUD       403225
+#define CONFIG_SYS_BAUDRATE_TABLE  \
     {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400}
 
 /*
  * Miscellaneous configurable options
  */
-#define CFG_PROMPT	"=> "				/* Monitor Command Prompt	*/
-#define	CFG_CBSIZE	256				/* Console I/O Buffer Size	*/
-#define CFG_BARGSIZE	CFG_CBSIZE			/* Boot Argument Buffer Size	*/
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16)	/* Print Buffer Size */
-#define CFG_MAXARGS	16				/* max number of command args	*/
+#define CONFIG_SYS_PROMPT	"=> "				/* Monitor Command Prompt	*/
+#define	CONFIG_SYS_CBSIZE	256				/* Console I/O Buffer Size	*/
+#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE			/* Boot Argument Buffer Size	*/
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)	/* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS	16				/* max number of command args	*/
 
 
-#define CFG_LOAD_ADDR		0x100000	/* where to load what we get from TFTP */
-#define CFG_TFTP_LOADADDR	CFG_LOAD_ADDR
-#define CFG_EXTBDINFO		1		/* To use extended board_into (bd_t) */
-#define CFG_DRAM_TEST		1
+#define CONFIG_SYS_LOAD_ADDR		0x100000	/* where to load what we get from TFTP */
+#define CONFIG_SYS_TFTP_LOADADDR	CONFIG_SYS_LOAD_ADDR
+#define CONFIG_SYS_EXTBDINFO		1		/* To use extended board_into (bd_t) */
+#define CONFIG_SYS_DRAM_TEST		1
 
 /*-----------------------------------------------------------------------
  * Start addresses for the final memory configuration
  * (Set up by the startup code)
- * Please note that CFG_SDRAM_BASE _must_ start at 0
+ * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
  */
-#define CFG_SDRAM_BASE		0x00000000
-#define CFG_FLASH_BASE		0xFFC00000
-#define CFG_MONITOR_BASE	TEXT_BASE
+#define CONFIG_SYS_SDRAM_BASE		0x00000000
+#define CONFIG_SYS_FLASH_BASE		0xFFC00000
+#define CONFIG_SYS_MONITOR_BASE	TEXT_BASE
 
 
-#define CFG_MONITOR_LEN		(192 * 1024)	/* Reserve 192 kB for Monitor	*/
+#define CONFIG_SYS_MONITOR_LEN		(192 * 1024)	/* Reserve 192 kB for Monitor	*/
 
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
+#define CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
 /*-----------------------------------------------------------------------
  * FLASH organization
  */
-#define CFG_MAX_FLASH_BANKS	 1		/* max number of memory banks		*/
-#define CFG_MAX_FLASH_SECT	 64		/* max number of sectors on one chip	*/
-#define CFG_FLASH_ERASE_TOUT 120000	/* Timeout for Flash Erase (in ms)	*/
-#define CFG_FLASH_WRITE_TOUT 500	/* Timeout for Flash Write (in ms)	*/
+#define CONFIG_SYS_MAX_FLASH_BANKS	 1		/* max number of memory banks		*/
+#define CONFIG_SYS_MAX_FLASH_SECT	 64		/* max number of sectors on one chip	*/
+#define CONFIG_SYS_FLASH_ERASE_TOUT 120000	/* Timeout for Flash Erase (in ms)	*/
+#define CONFIG_SYS_FLASH_WRITE_TOUT 500	/* Timeout for Flash Write (in ms)	*/
 
 /* BEG ENVIRONNEMENT FLASH: needs to be a whole FlashSector  */
-#define CFG_ENV_OFFSET		0x3c8000
-#define CFG_ENV_IS_IN_FLASH	1	/* use FLASH for environment vars */
-#define	CFG_ENV_SIZE		0x1000	 /* Total Size of Environment area	*/
-#define CFG_ENV_SECT_SIZE	0x10000	 /* see README - env sector total size	*/
+#define CONFIG_ENV_OFFSET		0x3c8000
+#define CONFIG_ENV_IS_IN_FLASH	1	/* use FLASH for environment vars */
+#define	CONFIG_ENV_SIZE		0x1000	 /* Total Size of Environment area	*/
+#define CONFIG_ENV_SECT_SIZE	0x10000	 /* see README - env sector total size	*/
 
 /* Memory tests: U-BOOT relocates itself to the top of Ram, so its at
  * 32meg-(128k+some_malloc_space+copy-of-ENV sector)..
  */
-#define CFG_SDRAM_SIZE		32		/* megs of ram */
-#define CFG_MEMTEST_START	0x2000  /* memtest works from the end of */
+#define CONFIG_SYS_SDRAM_SIZE		32		/* megs of ram */
+#define CONFIG_SYS_MEMTEST_START	0x2000  /* memtest works from the end of */
 									/* the exception vector table */
 									/* to the end of the DRAM  */
 									/* less monitor and malloc area */
-#define CFG_STACK_USAGE		0x10000 /* Reserve 64k for the stack usage */
-#define CFG_MALLOC_LEN		(128 << 10)	/* 128k for malloc space */
-#define CFG_MEM_END_USAGE	( CFG_MONITOR_LEN \
-				+ CFG_MALLOC_LEN \
-				+ CFG_ENV_SECT_SIZE \
-				+ CFG_STACK_USAGE )
-
-#define CFG_MEMTEST_END		(CFG_SDRAM_SIZE * 1024 * 1024 - CFG_MEM_END_USAGE)
+#define CONFIG_SYS_STACK_USAGE		0x10000 /* Reserve 64k for the stack usage */
+#define CONFIG_SYS_MALLOC_LEN		(128 << 10)	/* 128k for malloc space */
+#define CONFIG_SYS_MEM_END_USAGE	( CONFIG_SYS_MONITOR_LEN \
+				+ CONFIG_SYS_MALLOC_LEN \
+				+ CONFIG_ENV_SECT_SIZE \
+				+ CONFIG_SYS_STACK_USAGE )
+
+#define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_SDRAM_SIZE * 1024 * 1024 - CONFIG_SYS_MEM_END_USAGE)
 /* END ENVIRONNEMENT FLASH */
 
 /*
@@ -198,7 +200,7 @@
  * BR0/1 and OR0/1 (FLASH)
  */
 
-#define FLASH_BASE0_PRELIM	CFG_FLASH_BASE	/* FLASH bank #0	*/
+#define FLASH_BASE0_PRELIM	CONFIG_SYS_FLASH_BASE	/* FLASH bank #0	*/
 
 
 /*-----------------------------------------------------------------------
@@ -206,23 +208,23 @@
  */
 #if 1
 /* On Chip Memory location */
-#define CFG_TEMP_STACK_OCM	1
-#define CFG_OCM_DATA_ADDR	0xF0000000
-#define CFG_OCM_DATA_SIZE	0x1000
-
-#define CFG_INIT_RAM_ADDR	CFG_OCM_DATA_ADDR /* inside of SDRAM		*/
-#define CFG_INIT_RAM_END	CFG_OCM_DATA_SIZE /* End of used area in RAM	*/
-#define CFG_GBL_DATA_SIZE      256  /* size in bytes reserved for initial data */
-#define CFG_GBL_DATA_OFFSET    (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP_OFFSET      CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_TEMP_STACK_OCM	1
+#define CONFIG_SYS_OCM_DATA_ADDR	0xF0000000
+#define CONFIG_SYS_OCM_DATA_SIZE	0x1000
+
+#define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_OCM_DATA_ADDR /* inside of SDRAM		*/
+#define CONFIG_SYS_INIT_RAM_END	CONFIG_SYS_OCM_DATA_SIZE /* End of used area in RAM	*/
+#define CONFIG_SYS_GBL_DATA_SIZE      256  /* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET    (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET      CONFIG_SYS_GBL_DATA_OFFSET
 #else
-#define CFG_OCM_DATA_ADDR	0xF0000000
-#define CFG_OCM_DATA_SIZE	0x1000
-#define CFG_INIT_RAM_ADDR	CFG_OCM_DATA_ADDR	/* inside of On Chip SRAM    */
-#define CFG_INIT_RAM_END	CFG_OCM_DATA_SIZE	/* End of On Chip SRAM	     */
-#define CFG_GBL_DATA_SIZE	64	/* size in bytes reserved for initial data */
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_OCM_DATA_ADDR	0xF0000000
+#define CONFIG_SYS_OCM_DATA_SIZE	0x1000
+#define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_OCM_DATA_ADDR	/* inside of On Chip SRAM    */
+#define CONFIG_SYS_INIT_RAM_END	CONFIG_SYS_OCM_DATA_SIZE	/* End of On Chip SRAM	     */
+#define CONFIG_SYS_GBL_DATA_SIZE	64	/* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 #endif
 
 /*-----------------------------------------------------------------------
diff --git a/include/configs/CU824.h b/include/configs/CU824.h
index f36d8dacc..4a3f2bc8a 100644
--- a/include/configs/CU824.h
+++ b/include/configs/CU824.h
@@ -48,7 +48,7 @@
 
 #define CONFIG_CONS_INDEX	1
 #define CONFIG_BAUDRATE		9600
-#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
 
 #define CONFIG_PREBOOT	"echo;echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;echo"
 
@@ -83,54 +83,54 @@
 /*
  * Miscellaneous configurable options
  */
-#define CFG_LONGHELP			/* undef to save memory		*/
-#define CFG_PROMPT	"=> "		/* Monitor Command Prompt	*/
-#define CFG_CBSIZE	256		/* Console I/O Buffer Size	*/
+#define CONFIG_SYS_LONGHELP			/* undef to save memory		*/
+#define CONFIG_SYS_PROMPT	"=> "		/* Monitor Command Prompt	*/
+#define CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size	*/
 
 #if 1
-#define	CFG_HUSH_PARSER		1	/* use "hush" command parser	*/
+#define	CONFIG_SYS_HUSH_PARSER		1	/* use "hush" command parser	*/
 #endif
-#ifdef	CFG_HUSH_PARSER
-#define	CFG_PROMPT_HUSH_PS2	"> "
+#ifdef	CONFIG_SYS_HUSH_PARSER
+#define	CONFIG_SYS_PROMPT_HUSH_PS2	"> "
 #endif
 
 /* Print Buffer Size
  */
-#define CFG_PBSIZE	(CFG_CBSIZE + sizeof(CFG_PROMPT) + 16)
+#define CONFIG_SYS_PBSIZE	(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
 
-#define	CFG_MAXARGS	16		/* max number of command args	*/
-#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size	*/
-#define CFG_LOAD_ADDR	0x00100000	/* Default load address		*/
+#define	CONFIG_SYS_MAXARGS	16		/* max number of command args	*/
+#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
+#define CONFIG_SYS_LOAD_ADDR	0x00100000	/* Default load address		*/
 
 /*-----------------------------------------------------------------------
  * Start addresses for the final memory configuration
  * (Set up by the startup code)
- * Please note that CFG_SDRAM_BASE _must_ start at 0
+ * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
  */
-#define CFG_SDRAM_BASE	    0x00000000
-#define CFG_FLASH_BASE	    0xFF000000
+#define CONFIG_SYS_SDRAM_BASE	    0x00000000
+#define CONFIG_SYS_FLASH_BASE	    0xFF000000
 
-#define CFG_RESET_ADDRESS   0xFFF00100
+#define CONFIG_SYS_RESET_ADDRESS   0xFFF00100
 
-#define CFG_EUMB_ADDR	    0xFCE00000
+#define CONFIG_SYS_EUMB_ADDR	    0xFCE00000
 
-#define CFG_MONITOR_BASE    TEXT_BASE
+#define CONFIG_SYS_MONITOR_BASE    TEXT_BASE
 
-#define CFG_MONITOR_LEN	    (256 << 10) /* Reserve 256 kB for Monitor	*/
-#define CFG_MALLOC_LEN	    (128 << 10) /* Reserve 128 kB for malloc()	*/
+#define CONFIG_SYS_MONITOR_LEN	    (256 << 10) /* Reserve 256 kB for Monitor	*/
+#define CONFIG_SYS_MALLOC_LEN	    (128 << 10) /* Reserve 128 kB for malloc()	*/
 
-#define CFG_MEMTEST_START   0x00004000	/* memtest works on		*/
-#define CFG_MEMTEST_END	    0x02000000	/* 0 ... 32 MB in DRAM		*/
+#define CONFIG_SYS_MEMTEST_START   0x00004000	/* memtest works on		*/
+#define CONFIG_SYS_MEMTEST_END	    0x02000000	/* 0 ... 32 MB in DRAM		*/
 
 	/* Maximum amount of RAM.
 	 */
-#define CFG_MAX_RAM_SIZE    0x10000000
+#define CONFIG_SYS_MAX_RAM_SIZE    0x10000000
 
 
-#if CFG_MONITOR_BASE >= CFG_FLASH_BASE
-#undef CFG_RAMBOOT
+#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE
+#undef CONFIG_SYS_RAMBOOT
 #else
-#define CFG_RAMBOOT
+#define CONFIG_SYS_RAMBOOT
 #endif
 
 
@@ -140,24 +140,24 @@
 
 	/* Size in bytes reserved for initial data
 	 */
-#define CFG_GBL_DATA_SIZE    128
+#define CONFIG_SYS_GBL_DATA_SIZE    128
 
-#define CFG_INIT_RAM_ADDR     0x40000000
-#define CFG_INIT_RAM_END      0x1000
-#define CFG_GBL_DATA_OFFSET  (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_RAM_ADDR     0x40000000
+#define CONFIG_SYS_INIT_RAM_END      0x1000
+#define CONFIG_SYS_GBL_DATA_OFFSET  (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
 
 /*
  * NS16550 Configuration
  */
-#define CFG_NS16550
-#define CFG_NS16550_SERIAL
+#define CONFIG_SYS_NS16550
+#define CONFIG_SYS_NS16550_SERIAL
 
-#define CFG_NS16550_REG_SIZE	4
+#define CONFIG_SYS_NS16550_REG_SIZE	4
 
-#define CFG_NS16550_CLK		(14745600 / 2)
+#define CONFIG_SYS_NS16550_CLK		(14745600 / 2)
 
-#define CFG_NS16550_COM1	0xFE800080
-#define CFG_NS16550_COM2	0xFE8000C0
+#define CONFIG_SYS_NS16550_COM1	0xFE800080
+#define CONFIG_SYS_NS16550_COM2	0xFE8000C0
 
 /*
  * Low Level Configuration Settings
@@ -167,35 +167,35 @@
  */
 
 #define CONFIG_SYS_CLK_FREQ  33000000
-#define CFG_HZ		     1000
+#define CONFIG_SYS_HZ		     1000
 
 	/* Bit-field values for MCCR1.
 	 */
-#define CFG_ROMNAL	    0
-#define CFG_ROMFAL	    7
+#define CONFIG_SYS_ROMNAL	    0
+#define CONFIG_SYS_ROMFAL	    7
 
 	/* Bit-field values for MCCR2.
 	 */
-#define CFG_REFINT	    430	    /* Refresh interval			*/
+#define CONFIG_SYS_REFINT	    430	    /* Refresh interval			*/
 
 	/* Burst To Precharge. Bits of this value go to MCCR3 and MCCR4.
 	 */
-#define CFG_BSTOPRE	    192
+#define CONFIG_SYS_BSTOPRE	    192
 
 	/* Bit-field values for MCCR3.
 	 */
-#define CFG_REFREC	    2	    /* Refresh to activate interval	*/
-#define CFG_RDLAT	    3	    /* Data latancy from read command	*/
+#define CONFIG_SYS_REFREC	    2	    /* Refresh to activate interval	*/
+#define CONFIG_SYS_RDLAT	    3	    /* Data latancy from read command	*/
 
 	/* Bit-field values for MCCR4.
 	 */
-#define CFG_PRETOACT	    2	    /* Precharge to activate interval	*/
-#define CFG_ACTTOPRE	    5	    /* Activate to Precharge interval	*/
-#define CFG_SDMODE_CAS_LAT  2	    /* SDMODE CAS latancy		*/
-#define CFG_SDMODE_WRAP	    0	    /* SDMODE wrap type			*/
-#define CFG_SDMODE_BURSTLEN 2	    /* SDMODE Burst length		*/
-#define CFG_ACTORW	    2
-#define CFG_REGISTERD_TYPE_BUFFER 1
+#define CONFIG_SYS_PRETOACT	    2	    /* Precharge to activate interval	*/
+#define CONFIG_SYS_ACTTOPRE	    5	    /* Activate to Precharge interval	*/
+#define CONFIG_SYS_SDMODE_CAS_LAT  2	    /* SDMODE CAS latancy		*/
+#define CONFIG_SYS_SDMODE_WRAP	    0	    /* SDMODE wrap type			*/
+#define CONFIG_SYS_SDMODE_BURSTLEN 2	    /* SDMODE Burst length		*/
+#define CONFIG_SYS_ACTORW	    2
+#define CONFIG_SYS_REGISTERD_TYPE_BUFFER 1
 
 /* Memory bank settings.
  * Only bits 20-29 are actually used from these vales to set the
@@ -204,90 +204,90 @@
  * address. Refer to the MPC8240 book.
  */
 
-#define CFG_BANK0_START	    0x00000000
-#define CFG_BANK0_END	    (CFG_MAX_RAM_SIZE - 1)
-#define CFG_BANK0_ENABLE    1
-#define CFG_BANK1_START	    0x3ff00000
-#define CFG_BANK1_END	    0x3fffffff
-#define CFG_BANK1_ENABLE    0
-#define CFG_BANK2_START	    0x3ff00000
-#define CFG_BANK2_END	    0x3fffffff
-#define CFG_BANK2_ENABLE    0
-#define CFG_BANK3_START	    0x3ff00000
-#define CFG_BANK3_END	    0x3fffffff
-#define CFG_BANK3_ENABLE    0
-#define CFG_BANK4_START	    0x3ff00000
-#define CFG_BANK4_END	    0x3fffffff
-#define CFG_BANK4_ENABLE    0
-#define CFG_BANK5_START	    0x3ff00000
-#define CFG_BANK5_END	    0x3fffffff
-#define CFG_BANK5_ENABLE    0
-#define CFG_BANK6_START	    0x3ff00000
-#define CFG_BANK6_END	    0x3fffffff
-#define CFG_BANK6_ENABLE    0
-#define CFG_BANK7_START	    0x3ff00000
-#define CFG_BANK7_END	    0x3fffffff
-#define CFG_BANK7_ENABLE    0
-
-#define CFG_ODCR	    0xff
-
-#define CFG_IBAT0L  (CFG_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
-#define CFG_IBAT0U  (CFG_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
-
-#define CFG_IBAT1L  (CFG_INIT_RAM_ADDR | BATL_PP_10 | BATL_MEMCOHERENCE)
-#define CFG_IBAT1U  (CFG_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP)
-
-#define CFG_IBAT2L  (0x80000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
-#define CFG_IBAT2U  (0x80000000 | BATU_BL_256M | BATU_VS | BATU_VP)
-
-#define CFG_IBAT3L  (0xFC000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
-#define CFG_IBAT3U  (0xFC000000 | BATU_BL_64M | BATU_VS | BATU_VP)
-
-#define CFG_DBAT0L  CFG_IBAT0L
-#define CFG_DBAT0U  CFG_IBAT0U
-#define CFG_DBAT1L  CFG_IBAT1L
-#define CFG_DBAT1U  CFG_IBAT1U
-#define CFG_DBAT2L  CFG_IBAT2L
-#define CFG_DBAT2U  CFG_IBAT2U
-#define CFG_DBAT3L  CFG_IBAT3L
-#define CFG_DBAT3U  CFG_IBAT3U
+#define CONFIG_SYS_BANK0_START	    0x00000000
+#define CONFIG_SYS_BANK0_END	    (CONFIG_SYS_MAX_RAM_SIZE - 1)
+#define CONFIG_SYS_BANK0_ENABLE    1
+#define CONFIG_SYS_BANK1_START	    0x3ff00000
+#define CONFIG_SYS_BANK1_END	    0x3fffffff
+#define CONFIG_SYS_BANK1_ENABLE    0
+#define CONFIG_SYS_BANK2_START	    0x3ff00000
+#define CONFIG_SYS_BANK2_END	    0x3fffffff
+#define CONFIG_SYS_BANK2_ENABLE    0
+#define CONFIG_SYS_BANK3_START	    0x3ff00000
+#define CONFIG_SYS_BANK3_END	    0x3fffffff
+#define CONFIG_SYS_BANK3_ENABLE    0
+#define CONFIG_SYS_BANK4_START	    0x3ff00000
+#define CONFIG_SYS_BANK4_END	    0x3fffffff
+#define CONFIG_SYS_BANK4_ENABLE    0
+#define CONFIG_SYS_BANK5_START	    0x3ff00000
+#define CONFIG_SYS_BANK5_END	    0x3fffffff
+#define CONFIG_SYS_BANK5_ENABLE    0
+#define CONFIG_SYS_BANK6_START	    0x3ff00000
+#define CONFIG_SYS_BANK6_END	    0x3fffffff
+#define CONFIG_SYS_BANK6_ENABLE    0
+#define CONFIG_SYS_BANK7_START	    0x3ff00000
+#define CONFIG_SYS_BANK7_END	    0x3fffffff
+#define CONFIG_SYS_BANK7_ENABLE    0
+
+#define CONFIG_SYS_ODCR	    0xff
+
+#define CONFIG_SYS_IBAT0L  (CONFIG_SYS_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
+#define CONFIG_SYS_IBAT0U  (CONFIG_SYS_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
+
+#define CONFIG_SYS_IBAT1L  (CONFIG_SYS_INIT_RAM_ADDR | BATL_PP_10 | BATL_MEMCOHERENCE)
+#define CONFIG_SYS_IBAT1U  (CONFIG_SYS_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP)
+
+#define CONFIG_SYS_IBAT2L  (0x80000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
+#define CONFIG_SYS_IBAT2U  (0x80000000 | BATU_BL_256M | BATU_VS | BATU_VP)
+
+#define CONFIG_SYS_IBAT3L  (0xFC000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
+#define CONFIG_SYS_IBAT3U  (0xFC000000 | BATU_BL_64M | BATU_VS | BATU_VP)
+
+#define CONFIG_SYS_DBAT0L  CONFIG_SYS_IBAT0L
+#define CONFIG_SYS_DBAT0U  CONFIG_SYS_IBAT0U
+#define CONFIG_SYS_DBAT1L  CONFIG_SYS_IBAT1L
+#define CONFIG_SYS_DBAT1U  CONFIG_SYS_IBAT1U
+#define CONFIG_SYS_DBAT2L  CONFIG_SYS_IBAT2L
+#define CONFIG_SYS_DBAT2U  CONFIG_SYS_IBAT2U
+#define CONFIG_SYS_DBAT3L  CONFIG_SYS_IBAT3L
+#define CONFIG_SYS_DBAT3U  CONFIG_SYS_IBAT3U
 
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define CFG_BOOTMAPSZ	    (8 << 20)	/* Initial Memory map for Linux */
+#define CONFIG_SYS_BOOTMAPSZ	    (8 << 20)	/* Initial Memory map for Linux */
 
 /*-----------------------------------------------------------------------
  * FLASH organization
  */
-#define CFG_MAX_FLASH_BANKS	2	/* Max number of flash banks		*/
-#define CFG_MAX_FLASH_SECT	39	/* Max number of sectors in one bank	*/
+#define CONFIG_SYS_MAX_FLASH_BANKS	2	/* Max number of flash banks		*/
+#define CONFIG_SYS_MAX_FLASH_SECT	39	/* Max number of sectors in one bank	*/
 
-#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
-#define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
+#define CONFIG_SYS_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
+#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
 
 	/* Warining: environment is not EMBEDDED in the U-Boot code.
 	 * It's stored in flash separately.
 	 */
-#define CFG_ENV_IS_IN_FLASH	    1
+#define CONFIG_ENV_IS_IN_FLASH	    1
 #if 0
-#define CFG_ENV_ADDR		0xFF008000
-#define CFG_ENV_SIZE		0x8000	/* Size of the Environment Sector	*/
+#define CONFIG_ENV_ADDR		0xFF008000
+#define CONFIG_ENV_SIZE		0x8000	/* Size of the Environment Sector	*/
 #else
-#define CFG_ENV_ADDR		0xFFFC0000
-#define CFG_ENV_SIZE		0x4000	/* Size of the Environment		*/
-#define CFG_ENV_OFFSET		0	/* starting right at the beginning	*/
-#define CFG_ENV_SECT_SIZE	0x40000 /* Size of the Environment Sector	*/
+#define CONFIG_ENV_ADDR		0xFFFC0000
+#define CONFIG_ENV_SIZE		0x4000	/* Size of the Environment		*/
+#define CONFIG_ENV_OFFSET		0	/* starting right at the beginning	*/
+#define CONFIG_ENV_SECT_SIZE	0x40000 /* Size of the Environment Sector	*/
 #endif
 
 /*-----------------------------------------------------------------------
  * Cache Configuration
  */
-#define CFG_CACHELINE_SIZE	32
+#define CONFIG_SYS_CACHELINE_SIZE	32
 #if defined(CONFIG_CMD_KGDB)
-#  define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value	*/
+#  define CONFIG_SYS_CACHELINE_SHIFT	5	/* log base 2 of the above value	*/
 #endif
 
 /*
@@ -310,11 +310,11 @@
 #define CONFIG_TULIP
 #define CONFIG_TULIP_USE_IO
 
-#define CFG_ETH_DEV_FN	     0x7800
-#define CFG_ETH_IOBASE	     0x00104000
+#define CONFIG_SYS_ETH_DEV_FN	     0x7800
+#define CONFIG_SYS_ETH_IOBASE	     0x00104000
 
 #define CONFIG_EEPRO100
-#define CFG_RX_ETH_BUFFER	8               /* use 8 rx buffer on eepro100  */
+#define CONFIG_SYS_RX_ETH_BUFFER	8               /* use 8 rx buffer on eepro100  */
 #define PCI_ENET0_IOADDR	0x00104000
 #define PCI_ENET0_MEMADDR	0x80000000
 #endif	/* __CONFIG_H */
diff --git a/include/configs/DASA_SIM.h b/include/configs/DASA_SIM.h
index 117a1367c..61704d0f1 100644
--- a/include/configs/DASA_SIM.h
+++ b/include/configs/DASA_SIM.h
@@ -50,7 +50,7 @@
 #undef	CONFIG_BOOTARGS
 
 #define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
-#define CFG_LOADS_BAUD_CHANGE	1	/* allow baudrate change	*/
+#define CONFIG_SYS_LOADS_BAUD_CHANGE	1	/* allow baudrate change	*/
 
 #undef CONFIG_WATCHDOG			/* watchdog disabled		*/
 
@@ -78,93 +78,93 @@
 #if 0 /* Does not appear to be used?!  If it is used, needs to be fixed */
 #define CONFIG_SOFT_I2C			/* Software I2C support enabled */
 #endif
-#define CFG_I2C_EEPROM_ADDR_LEN 1	/* Bytes of address		*/
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1	/* Bytes of address		*/
 
 /*
  * Miscellaneous configurable options
  */
-#define CFG_LONGHELP			/* undef to save memory		*/
-#define CFG_PROMPT	"=> "		/* Monitor Command Prompt	*/
+#define CONFIG_SYS_LONGHELP			/* undef to save memory		*/
+#define CONFIG_SYS_PROMPT	"=> "		/* Monitor Command Prompt	*/
 #if defined(CONFIG_CMD_KGDB)
-#define CFG_CBSIZE	1024		/* Console I/O Buffer Size	*/
+#define CONFIG_SYS_CBSIZE	1024		/* Console I/O Buffer Size	*/
 #else
-#define CFG_CBSIZE	256		/* Console I/O Buffer Size	*/
+#define CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size	*/
 #endif
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define CFG_MAXARGS	16		/* max number of command args	*/
-#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS	16		/* max number of command args	*/
+#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
 
-#define CFG_CONSOLE_INFO_QUIET	1	/* don't print console @ startup*/
+#define CONFIG_SYS_CONSOLE_INFO_QUIET	1	/* don't print console @ startup*/
 
-#define CFG_MEMTEST_START	0x0400000	/* memtest works on	*/
-#define CFG_MEMTEST_END		0x0C00000	/* 4 ... 12 MB in DRAM	*/
+#define CONFIG_SYS_MEMTEST_START	0x0400000	/* memtest works on	*/
+#define CONFIG_SYS_MEMTEST_END		0x0C00000	/* 4 ... 12 MB in DRAM	*/
 
 /* The following table includes the supported baudrates */
-#define CFG_BAUDRATE_TABLE	\
+#define CONFIG_SYS_BAUDRATE_TABLE	\
 	{ 300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200 }
 
-#define CFG_LOAD_ADDR	0x100000	/* default load address */
+#define CONFIG_SYS_LOAD_ADDR	0x100000	/* default load address */
 
-#define CFG_HZ		1000		/* decrementer freq: 1 ms ticks */
+#define CONFIG_SYS_HZ		1000		/* decrementer freq: 1 ms ticks */
 
 #define CONFIG_ZERO_BOOTDELAY_CHECK	/* check for keypress on bootdelay==0 */
 
 /*-----------------------------------------------------------------------
  * Definitions for initial stack pointer and data area (in DPRAM)
  */
-#define CFG_INIT_RAM_ADDR	0x00df0000 /* inside of SDRAM			*/
-#define CFG_INIT_RAM_END	0x0f00	/* End of used area in RAM	       */
-#define CFG_GBL_DATA_SIZE	64  /* size in bytes reserved for initial data */
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_INIT_RAM_ADDR	0x00df0000 /* inside of SDRAM			*/
+#define CONFIG_SYS_INIT_RAM_END	0x0f00	/* End of used area in RAM	       */
+#define CONFIG_SYS_GBL_DATA_SIZE	64  /* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
 /*-----------------------------------------------------------------------
  * Start addresses for the final memory configuration
  * (Set up by the startup code)
- * Please note that CFG_SDRAM_BASE _must_ start at 0
+ * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
  */
-#define CFG_SDRAM_BASE		0x00000000
-#define CFG_FLASH_BASE		0xFFFD0000
-#define CFG_MONITOR_BASE	CFG_FLASH_BASE
-#define CFG_MONITOR_LEN		(192 << 10)	/* Reserve 128 kB for Monitor	*/
-#define CFG_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/
+#define CONFIG_SYS_SDRAM_BASE		0x00000000
+#define CONFIG_SYS_FLASH_BASE		0xFFFD0000
+#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_FLASH_BASE
+#define CONFIG_SYS_MONITOR_LEN		(192 << 10)	/* Reserve 128 kB for Monitor	*/
+#define CONFIG_SYS_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/
 
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
+#define CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
 /*-----------------------------------------------------------------------
  * FLASH organization
  */
-#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
-#define CFG_MAX_FLASH_SECT	256	/* max number of sectors on one chip	*/
+#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
+#define CONFIG_SYS_MAX_FLASH_SECT	256	/* max number of sectors on one chip	*/
 
-#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
-#define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
+#define CONFIG_SYS_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
+#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
 
-#define CFG_FLASH_WORD_SIZE	unsigned char	/* flash word size (width)	*/
-#define CFG_FLASH_ADDR0		0x0AA9	/* 1st address for flash config cycles	*/
-#define CFG_FLASH_ADDR1		0x0556	/* 2nd address for flash config cycles	*/
+#define CONFIG_SYS_FLASH_WORD_SIZE	unsigned char	/* flash word size (width)	*/
+#define CONFIG_SYS_FLASH_ADDR0		0x0AA9	/* 1st address for flash config cycles	*/
+#define CONFIG_SYS_FLASH_ADDR1		0x0556	/* 2nd address for flash config cycles	*/
 /*
  * The following defines are added for buggy IOP480 byte interface.
  * All other boards should use the standard values (CPCI405 etc.)
  */
-#define CFG_FLASH_READ0		0x0002	/* 0 is standard			*/
-#define CFG_FLASH_READ1		0x0000	/* 1 is standard			*/
-#define CFG_FLASH_READ2		0x0004	/* 2 is standard			*/
+#define CONFIG_SYS_FLASH_READ0		0x0002	/* 0 is standard			*/
+#define CONFIG_SYS_FLASH_READ1		0x0000	/* 1 is standard			*/
+#define CONFIG_SYS_FLASH_READ2		0x0004	/* 2 is standard			*/
 
-#define CFG_FLASH_EMPTY_INFO		/* print 'E' for empty sector on flinfo */
+#define CONFIG_SYS_FLASH_EMPTY_INFO		/* print 'E' for empty sector on flinfo */
 
-#define CFG_ENV_IS_IN_FLASH	1
-#define CFG_ENV_OFFSET		0x00010000	/* Offset of Environment Sector */
-#define CFG_ENV_SIZE		0x1000	/* Total Size of Environment Sector	*/
+#define CONFIG_ENV_IS_IN_FLASH	1
+#define CONFIG_ENV_OFFSET		0x00010000	/* Offset of Environment Sector */
+#define CONFIG_ENV_SIZE		0x1000	/* Total Size of Environment Sector	*/
 
 #if 0
-#define CFG_ENV_SECT_SIZE	0x8000	/* see README - env sector total size	*/
+#define CONFIG_ENV_SECT_SIZE	0x8000	/* see README - env sector total size	*/
 #else
-#define CFG_ENV_SECT_SIZE	0x10000 /* see README - env sector total size	*/
+#define CONFIG_ENV_SECT_SIZE	0x10000 /* see README - env sector total size	*/
 #endif
 
 /*-----------------------------------------------------------------------
@@ -177,10 +177,10 @@
 
 #define CONFIG_TULIP
 
-#define CFG_ETH_DEV_FN	     0x0000
-#define CFG_ETH_IOBASE	     0x0fff0000
-#define CFG_PCI9054_DEV_FN   0x0800
-#define CFG_PCI9054_IOBASE   0x0eff0000
+#define CONFIG_SYS_ETH_DEV_FN	     0x0000
+#define CONFIG_SYS_ETH_IOBASE	     0x0fff0000
+#define CONFIG_SYS_PCI9054_DEV_FN   0x0800
+#define CONFIG_SYS_PCI9054_IOBASE   0x0eff0000
 
 /*
  * Init Memory Controller:
diff --git a/include/configs/DB64360.h b/include/configs/DB64360.h
index eef216dfa..daed9342b 100644
--- a/include/configs/DB64360.h
+++ b/include/configs/DB64360.h
@@ -132,13 +132,13 @@ if we use PCI it has its own MAC addr */
 #define CONFIG_MISC_INIT_R     /* initialize the icache L1 */
 #define CONFIG_BOARD_EARLY_INIT_F
 
-#define CFG_BOARD_NAME		"DB64360"
+#define CONFIG_SYS_BOARD_NAME		"DB64360"
 #define CONFIG_IDENT_STRING	"Marvell DB64360 (1.1)"
 
-/*#define CFG_HUSH_PARSER */
-#undef CFG_HUSH_PARSER
+/*#define CONFIG_SYS_HUSH_PARSER */
+#undef CONFIG_SYS_HUSH_PARSER
 
-#define CFG_PROMPT_HUSH_PS2	"> "
+#define CONFIG_SYS_PROMPT_HUSH_PS2	"> "
 
 /*
  * The following defines let you select what serial you want to use
@@ -146,7 +146,7 @@ if we use PCI it has its own MAC addr */
  *
  * what to do:
  * to use the DUART, undef CONFIG_MPSC.	 If you have hacked a serial
- * cable onto the second DUART channel, change the CFG_DUART port from 1
+ * cable onto the second DUART channel, change the CONFIG_SYS_DUART port from 1
  * to 0 below.
  *
  * to use the MPSC, #define CONFIG_MPSC.  If you have wired up another
@@ -210,7 +210,7 @@ ip=${ipaddr}:${serverip}${bootargs_end}; bootm 0x400000;\0"
 /* --------------------------------------------------------------------------------------------------------------- */
 
 #define CONFIG_LOADS_ECHO	0	/* echo off for serial download */
-#define CFG_LOADS_BAUD_CHANGE		/* allow baudrate changes	*/
+#define CONFIG_SYS_LOADS_BAUD_CHANGE		/* allow baudrate changes	*/
 
 #undef	CONFIG_WATCHDOG			/* watchdog disabled		*/
 #undef	CONFIG_ALTIVEC			/* undef to disable		*/
@@ -265,74 +265,74 @@ ip=${ipaddr}:${serverip}${bootargs_end}; bootm 0x400000;\0"
 /*
  * Miscellaneous configurable options
  */
-#define CFG_I2C_EEPROM_ADDR_LEN 1
-#define CFG_I2C_MULTI_EEPROMS
-#define CFG_I2C_SPEED	40000		/* I2C speed default */
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
+#define CONFIG_SYS_I2C_MULTI_EEPROMS
+#define CONFIG_SYS_I2C_SPEED	40000		/* I2C speed default */
 
-/* #define CFG_GT_DUAL_CPU	 also for JTAG even with one cpu */
-#define CFG_LONGHELP			/* undef to save memory		*/
-#define CFG_PROMPT	"=> "		/* Monitor Command Prompt	*/
+/* #define CONFIG_SYS_GT_DUAL_CPU	 also for JTAG even with one cpu */
+#define CONFIG_SYS_LONGHELP			/* undef to save memory		*/
+#define CONFIG_SYS_PROMPT	"=> "		/* Monitor Command Prompt	*/
 #if defined(CONFIG_CMD_KGDB)
-#define CFG_CBSIZE	1024		/* Console I/O Buffer Size	*/
+#define CONFIG_SYS_CBSIZE	1024		/* Console I/O Buffer Size	*/
 #else
-#define CFG_CBSIZE	256		/* Console I/O Buffer Size	*/
+#define CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size	*/
 #endif
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define CFG_MAXARGS	16		/* max number of command args	*/
-#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS	16		/* max number of command args	*/
+#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
 
-/*#define CFG_MEMTEST_START	0x00400000	 memtest works on	*/
-/*#define CFG_MEMTEST_END		0x00C00000	 4 ... 12 MB in DRAM	*/
-/*#define CFG_MEMTEST_END		0x07c00000	 4 ... 124 MB in DRAM	*/
+/*#define CONFIG_SYS_MEMTEST_START	0x00400000	 memtest works on	*/
+/*#define CONFIG_SYS_MEMTEST_END		0x00C00000	 4 ... 12 MB in DRAM	*/
+/*#define CONFIG_SYS_MEMTEST_END		0x07c00000	 4 ... 124 MB in DRAM	*/
 
 /*
-#define CFG_DRAM_TEST
+#define CONFIG_SYS_DRAM_TEST
  * DRAM tests
- *   CFG_DRAM_TEST - enables the following tests.
+ *   CONFIG_SYS_DRAM_TEST - enables the following tests.
  *
- *   CFG_DRAM_TEST_DATA - Enables test for shorted or open data lines
+ *   CONFIG_SYS_DRAM_TEST_DATA - Enables test for shorted or open data lines
  *			  Environment variable 'test_dram_data' must be
  *			  set to 'y'.
- *   CFG_DRAM_TEST_DATA - Enables test to verify that each word is uniquely
+ *   CONFIG_SYS_DRAM_TEST_DATA - Enables test to verify that each word is uniquely
  *			  addressable. Environment variable
  *			  'test_dram_address' must be set to 'y'.
- *   CFG_DRAM_TEST_WALK - Enables test a 64-bit walking ones pattern test.
+ *   CONFIG_SYS_DRAM_TEST_WALK - Enables test a 64-bit walking ones pattern test.
  *			  This test takes about 6 minutes to test 64 MB.
  *			  Environment variable 'test_dram_walk' must be
  *			  set to 'y'.
  */
-#define CFG_DRAM_TEST
-#if defined(CFG_DRAM_TEST)
-#define CFG_MEMTEST_START		0x00400000	/* memtest works on	*/
-/* #define CFG_MEMTEST_END		0x00C00000	 4 ... 12 MB in DRAM	*/
-#define CFG_MEMTEST_END		0x07c00000	/* 4 ... 124 MB in DRAM */
-#define CFG_DRAM_TEST_DATA
-#define CFG_DRAM_TEST_ADDRESS
-#define CFG_DRAM_TEST_WALK
-#endif /* CFG_DRAM_TEST */
+#define CONFIG_SYS_DRAM_TEST
+#if defined(CONFIG_SYS_DRAM_TEST)
+#define CONFIG_SYS_MEMTEST_START		0x00400000	/* memtest works on	*/
+/* #define CONFIG_SYS_MEMTEST_END		0x00C00000	 4 ... 12 MB in DRAM	*/
+#define CONFIG_SYS_MEMTEST_END		0x07c00000	/* 4 ... 124 MB in DRAM */
+#define CONFIG_SYS_DRAM_TEST_DATA
+#define CONFIG_SYS_DRAM_TEST_ADDRESS
+#define CONFIG_SYS_DRAM_TEST_WALK
+#endif /* CONFIG_SYS_DRAM_TEST */
 
 #undef CONFIG_DISPLAY_MEMMAP		/* at the end of the bootprocess show the memory map */
-#undef CFG_DISPLAY_DIMM_SPD_CONTENT	/* show SPD content during boot */
+#undef CONFIG_SYS_DISPLAY_DIMM_SPD_CONTENT	/* show SPD content during boot */
 
-#define CFG_LOAD_ADDR		0x00400000	/* default load address */
+#define CONFIG_SYS_LOAD_ADDR		0x00400000	/* default load address */
 
-#define CFG_HZ			1000		/* decr freq: 1ms ticks */
+#define CONFIG_SYS_HZ			1000		/* decr freq: 1ms ticks */
 /*ronen - this the Sys clock (cpu bus,internal dram and SDRAM) */
-#define CFG_BUS_HZ		133000000	/* 133 MHz (CPU = 5*Bus = 666MHz)		*/
-#define CFG_BUS_CLK		CFG_BUS_HZ
+#define CONFIG_SYS_BUS_HZ		133000000	/* 133 MHz (CPU = 5*Bus = 666MHz)		*/
+#define CONFIG_SYS_BUS_CLK		CONFIG_SYS_BUS_HZ
 
-#define CFG_DDR_SDRAM_CYCLE_COUNT_LOP 7 /* define the SDRAM cycle count */
-#define CFG_DDR_SDRAM_CYCLE_COUNT_ROP 50 /* for 400MHZ -> 5.0 ns, for 133MHZ -> 7.50 ns */
+#define CONFIG_SYS_DDR_SDRAM_CYCLE_COUNT_LOP 7 /* define the SDRAM cycle count */
+#define CONFIG_SYS_DDR_SDRAM_CYCLE_COUNT_ROP 50 /* for 400MHZ -> 5.0 ns, for 133MHZ -> 7.50 ns */
 
 /*ronen - this is the Tclk (MV64360 core) */
-#define CFG_TCLK		133000000
+#define CONFIG_SYS_TCLK		133000000
 
 
-#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
 
-#define CFG_750FX_HID0		0x8000c084
-#define CFG_750FX_HID1		0x54800000
-#define CFG_750FX_HID2		0x00000000
+#define CONFIG_SYS_750FX_HID0		0x8000c084
+#define CONFIG_SYS_750FX_HID1		0x54800000
+#define CONFIG_SYS_750FX_HID2		0x00000000
 
 /*
  * Low Level Configuration Settings
@@ -345,51 +345,51 @@ ip=${ipaddr}:${serverip}${bootargs_end}; bootm 0x400000;\0"
  */
 
 /*
- * When locking data in cache you should point the CFG_INIT_RAM_ADDRESS
+ * When locking data in cache you should point the CONFIG_SYS_INIT_RAM_ADDRESS
  * To an unused memory region. The stack will remain in cache until RAM
  * is initialized
 */
-#define CFG_INIT_RAM_LOCK
-#define CFG_INIT_RAM_ADDR	0x40000000 /* unused memory region */
-#define CFG_INIT_RAM_END	0x1000
-#define CFG_GBL_DATA_SIZE	128  /* size in bytes reserved for init data */
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_RAM_LOCK
+#define CONFIG_SYS_INIT_RAM_ADDR	0x40000000 /* unused memory region */
+#define CONFIG_SYS_INIT_RAM_END	0x1000
+#define CONFIG_SYS_GBL_DATA_SIZE	128  /* size in bytes reserved for init data */
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
 
 #define RELOCATE_INTERNAL_RAM_ADDR
 #ifdef RELOCATE_INTERNAL_RAM_ADDR
-	#define CFG_INTERNAL_RAM_ADDR	0xf8000000
+	#define CONFIG_SYS_INTERNAL_RAM_ADDR	0xf8000000
 #endif
 
 /*-----------------------------------------------------------------------
  * Start addresses for the final memory configuration
  * (Set up by the startup code)
- * Please note that CFG_SDRAM_BASE _must_ start at 0
+ * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
  */
-#define CFG_SDRAM_BASE		0x00000000
+#define CONFIG_SYS_SDRAM_BASE		0x00000000
 /* Dummies for BAT 4-7 */
-#define CFG_SDRAM1_BASE		0x10000000	/* each 256 MByte */
-#define CFG_SDRAM2_BASE		0x20000000
-#define CFG_SDRAM3_BASE		0x30000000
-#define CFG_SDRAM4_BASE		0x40000000
-#define CFG_FLASH_BASE			0xfff00000
+#define CONFIG_SYS_SDRAM1_BASE		0x10000000	/* each 256 MByte */
+#define CONFIG_SYS_SDRAM2_BASE		0x20000000
+#define CONFIG_SYS_SDRAM3_BASE		0x30000000
+#define CONFIG_SYS_SDRAM4_BASE		0x40000000
+#define CONFIG_SYS_FLASH_BASE			0xfff00000
 
-#define CFG_DFL_BOOTCS_BASE	0xff800000
+#define CONFIG_SYS_DFL_BOOTCS_BASE	0xff800000
 #define CONFIG_VERY_BIG_RAM		/* we will use up to 256M memory for cause we are short of BATS*/
 
 #define BRIDGE_REG_BASE_BOOTM 0xfbe00000 /* this paramaters are used when booting the linux kernel */
 #define UART_BASE_BOOTM	      0xfbb00000 /* in order to be sync with the kernel parameters. */
 #define PCI0_IO_BASE_BOOTM    0xfd000000
 
-#define CFG_RESET_ADDRESS		0xfff00100
-#define CFG_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor */
-#define CFG_MONITOR_BASE		CFG_FLASH_BASE
-#define CFG_MALLOC_LEN		(256 << 10)	/* Reserve 256 kB for malloc */
+#define CONFIG_SYS_RESET_ADDRESS		0xfff00100
+#define CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor */
+#define CONFIG_SYS_MONITOR_BASE		CONFIG_SYS_FLASH_BASE
+#define CONFIG_SYS_MALLOC_LEN		(256 << 10)	/* Reserve 256 kB for malloc */
 
 /* areas to map different things with the GT in physical space */
-#define CFG_DRAM_BANKS		4
+#define CONFIG_SYS_DRAM_BANKS		4
 
 /* What to put in the bats. */
-#define CFG_MISC_REGION_BASE	0xf0000000
+#define CONFIG_SYS_MISC_REGION_BASE	0xf0000000
 
 /* Peripheral Device section */
 
@@ -403,30 +403,30 @@ ip=${ipaddr}:${serverip}${bootargs_end}; bootm 0x400000;\0"
 /* Data flash on external device module		    */
 /* Boot flash on external device module		    */
 /*******************************************************/
-#define CFG_DFL_GT_REGS		0x14000000				/* boot time GT_REGS */
-#define	 CFG_DB64360_RESET_ADDR 0x14000000				/* After power on Reset the DB64360 is here */
+#define CONFIG_SYS_DFL_GT_REGS		0x14000000				/* boot time GT_REGS */
+#define	 CONFIG_SYS_DB64360_RESET_ADDR 0x14000000				/* After power on Reset the DB64360 is here */
 
 /*++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++*/
-#define CFG_GT_REGS		0xf1000000				/* GT Registers will be mapped here */
-#define CFG_DEV_BASE		0xfc000000				/* GT Devices CS start here */
-
-#define CFG_DEV0_SPACE		CFG_DEV_BASE				/* DEV_CS0 device modul sram */
-#define CFG_DEV1_SPACE		(CFG_DEV0_SPACE + CFG_DEV0_SIZE)	/* DEV_CS1 device modul real time clock (rtc) */
-#define CFG_DEV2_SPACE		(CFG_DEV1_SPACE + CFG_DEV1_SIZE)	/* DEV_CS2 device modul doubel uart (duart) */
-#define CFG_DEV3_SPACE		(CFG_DEV2_SPACE + CFG_DEV2_SIZE)	/* DEV_CS3 device modul large flash */
-
-#define CFG_DEV0_SIZE		 _8M					/* db64360 sram	 @ 0xfc00.0000 */
-#define CFG_DEV1_SIZE		 _8M					/* db64360 rtc	 @ 0xfc80.0000 */
-#define CFG_DEV2_SIZE		_16M					/* db64360 duart @ 0xfd00.0000 */
-#define CFG_DEV3_SIZE		_16M					/* db64360 flash @ 0xfe00.0000 */
+#define CONFIG_SYS_GT_REGS		0xf1000000				/* GT Registers will be mapped here */
+#define CONFIG_SYS_DEV_BASE		0xfc000000				/* GT Devices CS start here */
+
+#define CONFIG_SYS_DEV0_SPACE		CONFIG_SYS_DEV_BASE				/* DEV_CS0 device modul sram */
+#define CONFIG_SYS_DEV1_SPACE		(CONFIG_SYS_DEV0_SPACE + CONFIG_SYS_DEV0_SIZE)	/* DEV_CS1 device modul real time clock (rtc) */
+#define CONFIG_SYS_DEV2_SPACE		(CONFIG_SYS_DEV1_SPACE + CONFIG_SYS_DEV1_SIZE)	/* DEV_CS2 device modul doubel uart (duart) */
+#define CONFIG_SYS_DEV3_SPACE		(CONFIG_SYS_DEV2_SPACE + CONFIG_SYS_DEV2_SIZE)	/* DEV_CS3 device modul large flash */
+
+#define CONFIG_SYS_DEV0_SIZE		 _8M					/* db64360 sram	 @ 0xfc00.0000 */
+#define CONFIG_SYS_DEV1_SIZE		 _8M					/* db64360 rtc	 @ 0xfc80.0000 */
+#define CONFIG_SYS_DEV2_SIZE		_16M					/* db64360 duart @ 0xfd00.0000 */
+#define CONFIG_SYS_DEV3_SIZE		_16M					/* db64360 flash @ 0xfe00.0000 */
 /*++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++*/
 
 /* Reset values for Port behavior (8bit/ 32bit, etc.) only corrected by device width */
-#define CFG_DEV0_PAR		0x8FEFFFFF				/* 32Bit  sram */
-#define CFG_DEV1_PAR		0x8FCFFFFF				/* 8Bit	 rtc */
-#define CFG_DEV2_PAR		0x8FCFFFFF				/* 8Bit duart */
-#define CFG_8BIT_BOOT_PAR	0x8FCFFFFF				/* 8Bit flash */
-#define CFG_32BIT_BOOT_PAR	0x8FEFFFFF				/* 32Bit flash */
+#define CONFIG_SYS_DEV0_PAR		0x8FEFFFFF				/* 32Bit  sram */
+#define CONFIG_SYS_DEV1_PAR		0x8FCFFFFF				/* 8Bit	 rtc */
+#define CONFIG_SYS_DEV2_PAR		0x8FCFFFFF				/* 8Bit duart */
+#define CONFIG_SYS_8BIT_BOOT_PAR	0x8FCFFFFF				/* 8Bit flash */
+#define CONFIG_SYS_32BIT_BOOT_PAR	0x8FEFFFFF				/* 32Bit flash */
 
 	/*   c	  4    a      8	    2	  4    1      c		*/
 	/* 33 22|2222|22 22|111 1|11 11|1 1  |	  |		*/
@@ -436,28 +436,28 @@ ip=${ipaddr}:${serverip}${bootargs_end}; bootm 0x400000;\0"
 
 
 /* ronen - update MPP Control MV64360*/
-#define CFG_MPP_CONTROL_0	0x02222222
-#define CFG_MPP_CONTROL_1	0x11333011
-#define CFG_MPP_CONTROL_2	0x40431111
-#define CFG_MPP_CONTROL_3	0x00000044
+#define CONFIG_SYS_MPP_CONTROL_0	0x02222222
+#define CONFIG_SYS_MPP_CONTROL_1	0x11333011
+#define CONFIG_SYS_MPP_CONTROL_2	0x40431111
+#define CONFIG_SYS_MPP_CONTROL_3	0x00000044
 
-/*# define CFG_SERIAL_PORT_MUX	0x00000102	 0=hiZ	1=MPSC0 2=ETH 0 and 2 RMII */
+/*# define CONFIG_SYS_SERIAL_PORT_MUX	0x00000102	 0=hiZ	1=MPSC0 2=ETH 0 and 2 RMII */
 
 
-# define CFG_GPP_LEVEL_CONTROL	0x2c600000	/* 1111 1001 0000 1111 1100 0000 0000 0000*/
+# define CONFIG_SYS_GPP_LEVEL_CONTROL	0x2c600000	/* 1111 1001 0000 1111 1100 0000 0000 0000*/
 							/* gpp[31]		gpp[30]		gpp[29]		gpp[28] */
 				/* gpp[27]			gpp[24]*/
 							/* gpp[19:14] */
 
 /* setup new config_value for MV64360 DDR-RAM !! */
-# define CFG_SDRAM_CONFIG	0x58200400	/* 0x1400  copied from Dink32 bzw. VxWorks*/
+# define CONFIG_SYS_SDRAM_CONFIG	0x58200400	/* 0x1400  copied from Dink32 bzw. VxWorks*/
 
-#define CFG_DUART_IO		CFG_DEV2_SPACE
-#define CFG_DUART_CHAN		1		/* channel to use for console */
-#define CFG_INIT_CHAN1
-#define CFG_INIT_CHAN2
+#define CONFIG_SYS_DUART_IO		CONFIG_SYS_DEV2_SPACE
+#define CONFIG_SYS_DUART_CHAN		1		/* channel to use for console */
+#define CONFIG_SYS_INIT_CHAN1
+#define CONFIG_SYS_INIT_CHAN2
 
-#define SRAM_BASE		CFG_DEV0_SPACE
+#define SRAM_BASE		CONFIG_SYS_DEV0_SPACE
 #define SRAM_SIZE		0x00100000		/* 1 MB of sram */
 
 
@@ -476,29 +476,29 @@ ip=${ipaddr}:${serverip}${bootargs_end}; bootm 0x400000;\0"
 #define CONFIG_EEPRO100			/* ronen - Support for Intel 82557/82559/82559ER chips */
 
 /* PCI MEMORY MAP section */
-#define CFG_PCI0_MEM_BASE	0x80000000
-#define CFG_PCI0_MEM_SIZE	_128M
-#define CFG_PCI1_MEM_BASE	0x88000000
-#define CFG_PCI1_MEM_SIZE	_128M
+#define CONFIG_SYS_PCI0_MEM_BASE	0x80000000
+#define CONFIG_SYS_PCI0_MEM_SIZE	_128M
+#define CONFIG_SYS_PCI1_MEM_BASE	0x88000000
+#define CONFIG_SYS_PCI1_MEM_SIZE	_128M
 
-#define CFG_PCI0_0_MEM_SPACE	(CFG_PCI0_MEM_BASE)
-#define CFG_PCI1_0_MEM_SPACE	(CFG_PCI1_MEM_BASE)
+#define CONFIG_SYS_PCI0_0_MEM_SPACE	(CONFIG_SYS_PCI0_MEM_BASE)
+#define CONFIG_SYS_PCI1_0_MEM_SPACE	(CONFIG_SYS_PCI1_MEM_BASE)
 
 /* PCI I/O MAP section */
-#define CFG_PCI0_IO_BASE	0xfa000000
-#define CFG_PCI0_IO_SIZE	_16M
-#define CFG_PCI1_IO_BASE	0xfb000000
-#define CFG_PCI1_IO_SIZE	_16M
+#define CONFIG_SYS_PCI0_IO_BASE	0xfa000000
+#define CONFIG_SYS_PCI0_IO_SIZE	_16M
+#define CONFIG_SYS_PCI1_IO_BASE	0xfb000000
+#define CONFIG_SYS_PCI1_IO_SIZE	_16M
 
-#define CFG_PCI0_IO_SPACE	(CFG_PCI0_IO_BASE)
-#define CFG_PCI0_IO_SPACE_PCI	(CFG_PCI0_IO_BASE) /* ronen we want phy=bus 0x00000000 */
-#define CFG_PCI1_IO_SPACE	(CFG_PCI1_IO_BASE)
-#define CFG_PCI1_IO_SPACE_PCI	(CFG_PCI1_IO_BASE) /* ronen we want phy=bus 0x00000000 */
+#define CONFIG_SYS_PCI0_IO_SPACE	(CONFIG_SYS_PCI0_IO_BASE)
+#define CONFIG_SYS_PCI0_IO_SPACE_PCI	(CONFIG_SYS_PCI0_IO_BASE) /* ronen we want phy=bus 0x00000000 */
+#define CONFIG_SYS_PCI1_IO_SPACE	(CONFIG_SYS_PCI1_IO_BASE)
+#define CONFIG_SYS_PCI1_IO_SPACE_PCI	(CONFIG_SYS_PCI1_IO_BASE) /* ronen we want phy=bus 0x00000000 */
 
 #if defined (CONFIG_750CX)
-#define CFG_PCI_IDSEL 0x0
+#define CONFIG_SYS_PCI_IDSEL 0x0
 #else
-#define CFG_PCI_IDSEL 0x30
+#define CONFIG_SYS_PCI_IDSEL 0x30
 #endif
 /*----------------------------------------------------------------------
  * Initial BAT mappings
@@ -510,28 +510,28 @@ ip=${ipaddr}:${serverip}${bootargs_end}; bootm 0x400000;\0"
  */
 
 /* SDRAM */
-#define CFG_IBAT0L (CFG_SDRAM_BASE | BATL_PP_RW | BATL_CACHEINHIBIT)
-#define CFG_IBAT0U (CFG_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
-#define CFG_DBAT0L (CFG_SDRAM_BASE | BATL_PP_RW | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
-#define CFG_DBAT0U CFG_IBAT0U
+#define CONFIG_SYS_IBAT0L (CONFIG_SYS_SDRAM_BASE | BATL_PP_RW | BATL_CACHEINHIBIT)
+#define CONFIG_SYS_IBAT0U (CONFIG_SYS_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CONFIG_SYS_DBAT0L (CONFIG_SYS_SDRAM_BASE | BATL_PP_RW | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
+#define CONFIG_SYS_DBAT0U CONFIG_SYS_IBAT0U
 
 /* init ram */
-#define CFG_IBAT1L  (CFG_INIT_RAM_ADDR | BATL_PP_RW | BATL_MEMCOHERENCE)
-#define CFG_IBAT1U  (CFG_INIT_RAM_ADDR | BATU_BL_256K | BATU_VS | BATU_VP)
-#define CFG_DBAT1L  CFG_IBAT1L
-#define CFG_DBAT1U  CFG_IBAT1U
+#define CONFIG_SYS_IBAT1L  (CONFIG_SYS_INIT_RAM_ADDR | BATL_PP_RW | BATL_MEMCOHERENCE)
+#define CONFIG_SYS_IBAT1U  (CONFIG_SYS_INIT_RAM_ADDR | BATU_BL_256K | BATU_VS | BATU_VP)
+#define CONFIG_SYS_DBAT1L  CONFIG_SYS_IBAT1L
+#define CONFIG_SYS_DBAT1U  CONFIG_SYS_IBAT1U
 
 /* PCI0, PCI1 in one BAT */
-#define CFG_IBAT2L BATL_NO_ACCESS
-#define CFG_IBAT2U CFG_DBAT2U
-#define CFG_DBAT2L (CFG_PCI0_MEM_BASE | BATL_CACHEINHIBIT | BATL_PP_RW | BATL_GUARDEDSTORAGE)
-#define CFG_DBAT2U (CFG_PCI0_MEM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CONFIG_SYS_IBAT2L BATL_NO_ACCESS
+#define CONFIG_SYS_IBAT2U CONFIG_SYS_DBAT2U
+#define CONFIG_SYS_DBAT2L (CONFIG_SYS_PCI0_MEM_BASE | BATL_CACHEINHIBIT | BATL_PP_RW | BATL_GUARDEDSTORAGE)
+#define CONFIG_SYS_DBAT2U (CONFIG_SYS_PCI0_MEM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
 
 /* GT regs, bootrom, all the devices, PCI I/O */
-#define CFG_IBAT3L (CFG_MISC_REGION_BASE | BATL_CACHEINHIBIT | BATL_PP_RW)
-#define CFG_IBAT3U (CFG_MISC_REGION_BASE | BATU_VS | BATU_VP | BATU_BL_256M)
-#define CFG_DBAT3L (CFG_MISC_REGION_BASE | BATL_CACHEINHIBIT | BATL_PP_RW | BATL_GUARDEDSTORAGE)
-#define CFG_DBAT3U CFG_IBAT3U
+#define CONFIG_SYS_IBAT3L (CONFIG_SYS_MISC_REGION_BASE | BATL_CACHEINHIBIT | BATL_PP_RW)
+#define CONFIG_SYS_IBAT3U (CONFIG_SYS_MISC_REGION_BASE | BATU_VS | BATU_VP | BATU_BL_256M)
+#define CONFIG_SYS_DBAT3L (CONFIG_SYS_MISC_REGION_BASE | BATL_CACHEINHIBIT | BATL_PP_RW | BATL_GUARDEDSTORAGE)
+#define CONFIG_SYS_DBAT3U CONFIG_SYS_IBAT3U
 
 /* I2C addresses for the two DIMM SPD chips */
 #define DIMM0_I2C_ADDR	0x56
@@ -542,35 +542,35 @@ ip=${ipaddr}:${serverip}${bootargs_end}; bootm 0x400000;\0"
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define CFG_BOOTMAPSZ		(8<<20) /* Initial Memory map for Linux */
+#define CONFIG_SYS_BOOTMAPSZ		(8<<20) /* Initial Memory map for Linux */
 
 /*-----------------------------------------------------------------------
  * FLASH organization
  */
-#define CFG_MAX_FLASH_BANKS	2	/* max number of memory banks	*/
-#define CFG_MAX_FLASH_SECT	67	/* max number of sectors on one chip */
+#define CONFIG_SYS_MAX_FLASH_BANKS	2	/* max number of memory banks	*/
+#define CONFIG_SYS_MAX_FLASH_SECT	67	/* max number of sectors on one chip */
 
-#define CFG_EXTRA_FLASH_DEVICE	DEVICE3 /* extra flash at device 3 */
-#define CFG_EXTRA_FLASH_WIDTH	4	/* 32 bit */
-#define CFG_BOOT_FLASH_WIDTH	1	/* 8 bit */
+#define CONFIG_SYS_EXTRA_FLASH_DEVICE	DEVICE3 /* extra flash at device 3 */
+#define CONFIG_SYS_EXTRA_FLASH_WIDTH	4	/* 32 bit */
+#define CONFIG_SYS_BOOT_FLASH_WIDTH	1	/* 8 bit */
 
-#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms) */
-#define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms) */
-#define CFG_FLASH_LOCK_TOUT	500	/* Timeout for Flash Lock (in ms) */
-#define CFG_FLASH_CFI		1
+#define CONFIG_SYS_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms) */
+#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms) */
+#define CONFIG_SYS_FLASH_LOCK_TOUT	500	/* Timeout for Flash Lock (in ms) */
+#define CONFIG_SYS_FLASH_CFI		1
 
-#define CFG_ENV_IS_IN_FLASH	1
-#define CFG_ENV_SIZE		0x1000	/* Total Size of Environment Sector */
-#define CFG_ENV_SECT_SIZE	0x10000
-#define CFG_ENV_ADDR	      0xFFF78000 /* Marvell 8-Bit Bootflash last sector */
-/* #define CFG_ENV_ADDR	   (CFG_FLASH_BASE+CFG_MONITOR_LEN-CFG_ENV_SECT_SIZE) */
+#define CONFIG_ENV_IS_IN_FLASH	1
+#define CONFIG_ENV_SIZE		0x1000	/* Total Size of Environment Sector */
+#define CONFIG_ENV_SECT_SIZE	0x10000
+#define CONFIG_ENV_ADDR	      0xFFF78000 /* Marvell 8-Bit Bootflash last sector */
+/* #define CONFIG_ENV_ADDR	   (CONFIG_SYS_FLASH_BASE+CONFIG_SYS_MONITOR_LEN-CONFIG_ENV_SECT_SIZE) */
 
 /*-----------------------------------------------------------------------
  * Cache Configuration
  */
-#define CFG_CACHELINE_SIZE	32	/* For all MPC74xx CPUs		 */
+#define CONFIG_SYS_CACHELINE_SIZE	32	/* For all MPC74xx CPUs		 */
 #if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value */
+#define CONFIG_SYS_CACHELINE_SHIFT	5	/* log base 2 of the above value */
 #endif
 
 /*-----------------------------------------------------------------------
@@ -578,7 +578,7 @@ ip=${ipaddr}:${serverip}${bootargs_end}; bootm 0x400000;\0"
  * look in include/mpc74xx.h for the defines used here
  */
 
-#define CFG_L2
+#define CONFIG_SYS_L2
 
 
 #if defined (CONFIG_750CX) || defined (CONFIG_750FX)
@@ -602,6 +602,6 @@ ip=${ipaddr}:${serverip}${bootargs_end}; bootm 0x400000;\0"
 #define BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH */
 #define BOOTFLAG_WARM	0x02		/* Software reboot		    */
 
-#define CFG_BOARD_ASM_INIT	1
+#define CONFIG_SYS_BOARD_ASM_INIT	1
 
 #endif	/* __CONFIG_H */
diff --git a/include/configs/DB64460.h b/include/configs/DB64460.h
index b14cd0df1..604fd45af 100644
--- a/include/configs/DB64460.h
+++ b/include/configs/DB64460.h
@@ -70,13 +70,13 @@
 #define CONFIG_MISC_INIT_R     /* initialize the icache L1 */
 #define CONFIG_BOARD_EARLY_INIT_F
 
-#define CFG_BOARD_NAME		"DB64460"
+#define CONFIG_SYS_BOARD_NAME		"DB64460"
 #define CONFIG_IDENT_STRING	"Marvell DB64460 (1.0)"
 
-/*#define CFG_HUSH_PARSER */
-#undef CFG_HUSH_PARSER
+/*#define CONFIG_SYS_HUSH_PARSER */
+#undef CONFIG_SYS_HUSH_PARSER
 
-#define CFG_PROMPT_HUSH_PS2	"> "
+#define CONFIG_SYS_PROMPT_HUSH_PS2	"> "
 
 /*
  * The following defines let you select what serial you want to use
@@ -84,7 +84,7 @@
  *
  * what to do:
  * to use the DUART, undef CONFIG_MPSC.	 If you have hacked a serial
- * cable onto the second DUART channel, change the CFG_DUART port from 1
+ * cable onto the second DUART channel, change the CONFIG_SYS_DUART port from 1
  * to 0 below.
  *
  * to use the MPSC, #define CONFIG_MPSC.  If you have wired up another
@@ -148,7 +148,7 @@ ip=${ipaddr}:${serverip}${bootargs_end}; bootm 0x400000;\0"
 /* --------------------------------------------------------------------------------------------------------------- */
 
 #define CONFIG_LOADS_ECHO	0	/* echo off for serial download */
-#define CFG_LOADS_BAUD_CHANGE		/* allow baudrate changes	*/
+#define CONFIG_SYS_LOADS_BAUD_CHANGE		/* allow baudrate changes	*/
 
 #undef	CONFIG_WATCHDOG			/* watchdog disabled		*/
 #undef	CONFIG_ALTIVEC			/* undef to disable		*/
@@ -203,74 +203,74 @@ ip=${ipaddr}:${serverip}${bootargs_end}; bootm 0x400000;\0"
 /*
  * Miscellaneous configurable options
  */
-#define CFG_I2C_EEPROM_ADDR_LEN 1
-#define CFG_I2C_MULTI_EEPROMS
-#define CFG_I2C_SPEED	40000		/* I2C speed default */
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
+#define CONFIG_SYS_I2C_MULTI_EEPROMS
+#define CONFIG_SYS_I2C_SPEED	40000		/* I2C speed default */
 
-/* #define CFG_GT_DUAL_CPU	 also for JTAG even with one cpu */
-#define CFG_LONGHELP			/* undef to save memory		*/
-#define CFG_PROMPT	"=> "		/* Monitor Command Prompt	*/
+/* #define CONFIG_SYS_GT_DUAL_CPU	 also for JTAG even with one cpu */
+#define CONFIG_SYS_LONGHELP			/* undef to save memory		*/
+#define CONFIG_SYS_PROMPT	"=> "		/* Monitor Command Prompt	*/
 #if defined(CONFIG_CMD_KGDB)
-#define CFG_CBSIZE	1024		/* Console I/O Buffer Size	*/
+#define CONFIG_SYS_CBSIZE	1024		/* Console I/O Buffer Size	*/
 #else
-#define CFG_CBSIZE	256		/* Console I/O Buffer Size	*/
+#define CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size	*/
 #endif
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define CFG_MAXARGS	16		/* max number of command args	*/
-#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS	16		/* max number of command args	*/
+#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
 
-/*#define CFG_MEMTEST_START	0x00400000	 memtest works on	*/
-/*#define CFG_MEMTEST_END		0x00C00000	 4 ... 12 MB in DRAM	*/
-/*#define CFG_MEMTEST_END		0x07c00000	 4 ... 124 MB in DRAM	*/
+/*#define CONFIG_SYS_MEMTEST_START	0x00400000	 memtest works on	*/
+/*#define CONFIG_SYS_MEMTEST_END		0x00C00000	 4 ... 12 MB in DRAM	*/
+/*#define CONFIG_SYS_MEMTEST_END		0x07c00000	 4 ... 124 MB in DRAM	*/
 
 /*
-#define CFG_DRAM_TEST
+#define CONFIG_SYS_DRAM_TEST
  * DRAM tests
- *   CFG_DRAM_TEST - enables the following tests.
+ *   CONFIG_SYS_DRAM_TEST - enables the following tests.
  *
- *   CFG_DRAM_TEST_DATA - Enables test for shorted or open data lines
+ *   CONFIG_SYS_DRAM_TEST_DATA - Enables test for shorted or open data lines
  *			  Environment variable 'test_dram_data' must be
  *			  set to 'y'.
- *   CFG_DRAM_TEST_DATA - Enables test to verify that each word is uniquely
+ *   CONFIG_SYS_DRAM_TEST_DATA - Enables test to verify that each word is uniquely
  *			  addressable. Environment variable
  *			  'test_dram_address' must be set to 'y'.
- *   CFG_DRAM_TEST_WALK - Enables test a 64-bit walking ones pattern test.
+ *   CONFIG_SYS_DRAM_TEST_WALK - Enables test a 64-bit walking ones pattern test.
  *			  This test takes about 6 minutes to test 64 MB.
  *			  Environment variable 'test_dram_walk' must be
  *			  set to 'y'.
  */
-#define CFG_DRAM_TEST
-#if defined(CFG_DRAM_TEST)
-#define CFG_MEMTEST_START		0x00400000	/* memtest works on	*/
-/* #define CFG_MEMTEST_END		0x00C00000	 4 ... 12 MB in DRAM	*/
-#define CFG_MEMTEST_END		0x07c00000	/* 4 ... 124 MB in DRAM */
-#define CFG_DRAM_TEST_DATA
-#define CFG_DRAM_TEST_ADDRESS
-#define CFG_DRAM_TEST_WALK
-#endif /* CFG_DRAM_TEST */
+#define CONFIG_SYS_DRAM_TEST
+#if defined(CONFIG_SYS_DRAM_TEST)
+#define CONFIG_SYS_MEMTEST_START		0x00400000	/* memtest works on	*/
+/* #define CONFIG_SYS_MEMTEST_END		0x00C00000	 4 ... 12 MB in DRAM	*/
+#define CONFIG_SYS_MEMTEST_END		0x07c00000	/* 4 ... 124 MB in DRAM */
+#define CONFIG_SYS_DRAM_TEST_DATA
+#define CONFIG_SYS_DRAM_TEST_ADDRESS
+#define CONFIG_SYS_DRAM_TEST_WALK
+#endif /* CONFIG_SYS_DRAM_TEST */
 
 #undef CONFIG_DISPLAY_MEMMAP		/* at the end of the bootprocess show the memory map */
-#undef CFG_DISPLAY_DIMM_SPD_CONTENT	/* show SPD content during boot */
+#undef CONFIG_SYS_DISPLAY_DIMM_SPD_CONTENT	/* show SPD content during boot */
 
-#define CFG_LOAD_ADDR		0x00400000	/* default load address */
+#define CONFIG_SYS_LOAD_ADDR		0x00400000	/* default load address */
 
-#define CFG_HZ			1000		/* decr freq: 1ms ticks */
+#define CONFIG_SYS_HZ			1000		/* decr freq: 1ms ticks */
 /*ronen - this the Sys clock (cpu bus,internal dram and SDRAM) */
-#define CFG_BUS_HZ		133000000	/* 133 MHz (CPU = 5*Bus = 666MHz)		*/
-#define CFG_BUS_CLK		CFG_BUS_HZ
+#define CONFIG_SYS_BUS_HZ		133000000	/* 133 MHz (CPU = 5*Bus = 666MHz)		*/
+#define CONFIG_SYS_BUS_CLK		CONFIG_SYS_BUS_HZ
 
-#define CFG_DDR_SDRAM_CYCLE_COUNT_LOP 7 /* define the SDRAM cycle count */
-#define CFG_DDR_SDRAM_CYCLE_COUNT_ROP 50 /* for 200MHZ -> 5.0 ns, 166MHZ -> 6.0, 133MHZ -> 7.50 ns */
+#define CONFIG_SYS_DDR_SDRAM_CYCLE_COUNT_LOP 7 /* define the SDRAM cycle count */
+#define CONFIG_SYS_DDR_SDRAM_CYCLE_COUNT_ROP 50 /* for 200MHZ -> 5.0 ns, 166MHZ -> 6.0, 133MHZ -> 7.50 ns */
 
 /*ronen - this is the Tclk (MV64460 core) */
-#define CFG_TCLK		133000000
+#define CONFIG_SYS_TCLK		133000000
 
 
-#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
 
-#define CFG_750FX_HID0		0x8000c084
-#define CFG_750FX_HID1		0x54800000
-#define CFG_750FX_HID2		0x00000000
+#define CONFIG_SYS_750FX_HID0		0x8000c084
+#define CONFIG_SYS_750FX_HID1		0x54800000
+#define CONFIG_SYS_750FX_HID2		0x00000000
 
 /*
  * Low Level Configuration Settings
@@ -283,51 +283,51 @@ ip=${ipaddr}:${serverip}${bootargs_end}; bootm 0x400000;\0"
  */
 
 /*
- * When locking data in cache you should point the CFG_INIT_RAM_ADDRESS
+ * When locking data in cache you should point the CONFIG_SYS_INIT_RAM_ADDRESS
  * To an unused memory region. The stack will remain in cache until RAM
  * is initialized
 */
-#define CFG_INIT_RAM_LOCK
-#define CFG_INIT_RAM_ADDR	0x40000000 /* unused memory region */
-#define CFG_INIT_RAM_END	0x1000
-#define CFG_GBL_DATA_SIZE	128  /* size in bytes reserved for init data */
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_RAM_LOCK
+#define CONFIG_SYS_INIT_RAM_ADDR	0x40000000 /* unused memory region */
+#define CONFIG_SYS_INIT_RAM_END	0x1000
+#define CONFIG_SYS_GBL_DATA_SIZE	128  /* size in bytes reserved for init data */
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
 
 #define RELOCATE_INTERNAL_RAM_ADDR
 #ifdef RELOCATE_INTERNAL_RAM_ADDR
-	#define CFG_INTERNAL_RAM_ADDR	0xf8000000
+	#define CONFIG_SYS_INTERNAL_RAM_ADDR	0xf8000000
 #endif
 
 /*-----------------------------------------------------------------------
  * Start addresses for the final memory configuration
  * (Set up by the startup code)
- * Please note that CFG_SDRAM_BASE _must_ start at 0
+ * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
  */
-#define CFG_SDRAM_BASE		0x00000000
+#define CONFIG_SYS_SDRAM_BASE		0x00000000
 /* Dummies for BAT 4-7 */
-#define CFG_SDRAM1_BASE		0x10000000	/* each 256 MByte */
-#define CFG_SDRAM2_BASE		0x20000000
-#define CFG_SDRAM3_BASE		0x30000000
-#define CFG_SDRAM4_BASE		0x40000000
-#define CFG_FLASH_BASE			0xfff00000
+#define CONFIG_SYS_SDRAM1_BASE		0x10000000	/* each 256 MByte */
+#define CONFIG_SYS_SDRAM2_BASE		0x20000000
+#define CONFIG_SYS_SDRAM3_BASE		0x30000000
+#define CONFIG_SYS_SDRAM4_BASE		0x40000000
+#define CONFIG_SYS_FLASH_BASE			0xfff00000
 
-#define CFG_DFL_BOOTCS_BASE	0xff800000
+#define CONFIG_SYS_DFL_BOOTCS_BASE	0xff800000
 #define CONFIG_VERY_BIG_RAM		/* we will use up to 256M memory for cause we are short of BATS*/
 
 #define BRIDGE_REG_BASE_BOOTM 0xfbe00000 /* this paramaters are used when booting the linux kernel */
 #define UART_BASE_BOOTM	      0xfbb00000 /* in order to be sync with the kernel parameters. */
 #define PCI0_IO_BASE_BOOTM    0xfd000000
 
-#define CFG_RESET_ADDRESS		0xfff00100
-#define CFG_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor */
-#define CFG_MONITOR_BASE		CFG_FLASH_BASE
-#define CFG_MALLOC_LEN		(256 << 10)	/* Reserve 256 kB for malloc */
+#define CONFIG_SYS_RESET_ADDRESS		0xfff00100
+#define CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor */
+#define CONFIG_SYS_MONITOR_BASE		CONFIG_SYS_FLASH_BASE
+#define CONFIG_SYS_MALLOC_LEN		(256 << 10)	/* Reserve 256 kB for malloc */
 
 /* areas to map different things with the GT in physical space */
-#define CFG_DRAM_BANKS		4
+#define CONFIG_SYS_DRAM_BANKS		4
 
 /* What to put in the bats. */
-#define CFG_MISC_REGION_BASE	0xf0000000
+#define CONFIG_SYS_MISC_REGION_BASE	0xf0000000
 
 /* Peripheral Device section */
 
@@ -341,30 +341,30 @@ ip=${ipaddr}:${serverip}${bootargs_end}; bootm 0x400000;\0"
 /* Data flash on external device module		    */
 /* Boot flash on external device module		    */
 /*******************************************************/
-#define CFG_DFL_GT_REGS		0x14000000				/* boot time GT_REGS */
-#define	 CFG_DB64460_RESET_ADDR 0x14000000				/* After power on Reset the DB64460 is here */
+#define CONFIG_SYS_DFL_GT_REGS		0x14000000				/* boot time GT_REGS */
+#define	 CONFIG_SYS_DB64460_RESET_ADDR 0x14000000				/* After power on Reset the DB64460 is here */
 
 /*++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++*/
-#define CFG_GT_REGS		0xf1000000				/* GT Registers will be mapped here */
-#define CFG_DEV_BASE		0xfc000000				/* GT Devices CS start here */
-
-#define CFG_DEV0_SPACE		CFG_DEV_BASE				/* DEV_CS0 device modul sram */
-#define CFG_DEV1_SPACE		(CFG_DEV0_SPACE + CFG_DEV0_SIZE)	/* DEV_CS1 device modul real time clock (rtc) */
-#define CFG_DEV2_SPACE		(CFG_DEV1_SPACE + CFG_DEV1_SIZE)	/* DEV_CS2 device modul doubel uart (duart) */
-#define CFG_DEV3_SPACE		(CFG_DEV2_SPACE + CFG_DEV2_SIZE)	/* DEV_CS3 device modul large flash */
-
-#define CFG_DEV0_SIZE		 _8M					/* db64460 sram	 @ 0xfc00.0000 */
-#define CFG_DEV1_SIZE		 _8M					/* db64460 rtc	 @ 0xfc80.0000 */
-#define CFG_DEV2_SIZE		_16M					/* db64460 duart @ 0xfd00.0000 */
-#define CFG_DEV3_SIZE		_16M					/* db64460 flash @ 0xfe00.0000 */
+#define CONFIG_SYS_GT_REGS		0xf1000000				/* GT Registers will be mapped here */
+#define CONFIG_SYS_DEV_BASE		0xfc000000				/* GT Devices CS start here */
+
+#define CONFIG_SYS_DEV0_SPACE		CONFIG_SYS_DEV_BASE				/* DEV_CS0 device modul sram */
+#define CONFIG_SYS_DEV1_SPACE		(CONFIG_SYS_DEV0_SPACE + CONFIG_SYS_DEV0_SIZE)	/* DEV_CS1 device modul real time clock (rtc) */
+#define CONFIG_SYS_DEV2_SPACE		(CONFIG_SYS_DEV1_SPACE + CONFIG_SYS_DEV1_SIZE)	/* DEV_CS2 device modul doubel uart (duart) */
+#define CONFIG_SYS_DEV3_SPACE		(CONFIG_SYS_DEV2_SPACE + CONFIG_SYS_DEV2_SIZE)	/* DEV_CS3 device modul large flash */
+
+#define CONFIG_SYS_DEV0_SIZE		 _8M					/* db64460 sram	 @ 0xfc00.0000 */
+#define CONFIG_SYS_DEV1_SIZE		 _8M					/* db64460 rtc	 @ 0xfc80.0000 */
+#define CONFIG_SYS_DEV2_SIZE		_16M					/* db64460 duart @ 0xfd00.0000 */
+#define CONFIG_SYS_DEV3_SIZE		_16M					/* db64460 flash @ 0xfe00.0000 */
 /*++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++*/
 
 /* Reset values for Port behavior (8bit/ 32bit, etc.) only corrected by device width */
-#define CFG_DEV0_PAR		0x8FEFFFFF				/* 32Bit  sram */
-#define CFG_DEV1_PAR		0x8FCFFFFF				/* 8Bit	 rtc */
-#define CFG_DEV2_PAR		0x8FCFFFFF				/* 8Bit duart */
-#define CFG_8BIT_BOOT_PAR	0x8FCFFFFF				/* 8Bit flash */
-#define CFG_32BIT_BOOT_PAR	0x8FEFFFFF				/* 32Bit flash */
+#define CONFIG_SYS_DEV0_PAR		0x8FEFFFFF				/* 32Bit  sram */
+#define CONFIG_SYS_DEV1_PAR		0x8FCFFFFF				/* 8Bit	 rtc */
+#define CONFIG_SYS_DEV2_PAR		0x8FCFFFFF				/* 8Bit duart */
+#define CONFIG_SYS_8BIT_BOOT_PAR	0x8FCFFFFF				/* 8Bit flash */
+#define CONFIG_SYS_32BIT_BOOT_PAR	0x8FEFFFFF				/* 32Bit flash */
 
 	/*   c	  4    a      8	    2	  4    1      c		*/
 	/* 33 22|2222|22 22|111 1|11 11|1 1  |	  |		*/
@@ -374,28 +374,28 @@ ip=${ipaddr}:${serverip}${bootargs_end}; bootm 0x400000;\0"
 
 
 /* ronen - update MPP Control MV64460*/
-#define CFG_MPP_CONTROL_0	0x02222222
-#define CFG_MPP_CONTROL_1	0x11333011
-#define CFG_MPP_CONTROL_2	0x40431111
-#define CFG_MPP_CONTROL_3	0x00000044
+#define CONFIG_SYS_MPP_CONTROL_0	0x02222222
+#define CONFIG_SYS_MPP_CONTROL_1	0x11333011
+#define CONFIG_SYS_MPP_CONTROL_2	0x40431111
+#define CONFIG_SYS_MPP_CONTROL_3	0x00000044
 
-/*# define CFG_SERIAL_PORT_MUX	0x00000102	 0=hiZ	1=MPSC0 2=ETH 0 and 2 RMII */
+/*# define CONFIG_SYS_SERIAL_PORT_MUX	0x00000102	 0=hiZ	1=MPSC0 2=ETH 0 and 2 RMII */
 
 
-# define CFG_GPP_LEVEL_CONTROL	0x2c600000	/* 1111 1001 0000 1111 1100 0000 0000 0000*/
+# define CONFIG_SYS_GPP_LEVEL_CONTROL	0x2c600000	/* 1111 1001 0000 1111 1100 0000 0000 0000*/
 							/* gpp[31]		gpp[30]		gpp[29]		gpp[28] */
 				/* gpp[27]			gpp[24]*/
 							/* gpp[19:14] */
 
 /* setup new config_value for MV64460 DDR-RAM !! */
-# define CFG_SDRAM_CONFIG	0x58200400	/* 0x1400  copied from Dink32 bzw. VxWorks*/
+# define CONFIG_SYS_SDRAM_CONFIG	0x58200400	/* 0x1400  copied from Dink32 bzw. VxWorks*/
 
-#define CFG_DUART_IO		CFG_DEV2_SPACE
-#define CFG_DUART_CHAN		1		/* channel to use for console */
-#define CFG_INIT_CHAN1
-#define CFG_INIT_CHAN2
+#define CONFIG_SYS_DUART_IO		CONFIG_SYS_DEV2_SPACE
+#define CONFIG_SYS_DUART_CHAN		1		/* channel to use for console */
+#define CONFIG_SYS_INIT_CHAN1
+#define CONFIG_SYS_INIT_CHAN2
 
-#define SRAM_BASE		CFG_DEV0_SPACE
+#define SRAM_BASE		CONFIG_SYS_DEV0_SPACE
 #define SRAM_SIZE		0x00100000		/* 1 MB of sram */
 
 
@@ -414,29 +414,29 @@ ip=${ipaddr}:${serverip}${bootargs_end}; bootm 0x400000;\0"
 #define CONFIG_EEPRO100			/* ronen - Support for Intel 82557/82559/82559ER chips */
 
 /* PCI MEMORY MAP section */
-#define CFG_PCI0_MEM_BASE	0x80000000
-#define CFG_PCI0_MEM_SIZE	_128M
-#define CFG_PCI1_MEM_BASE	0x88000000
-#define CFG_PCI1_MEM_SIZE	_128M
+#define CONFIG_SYS_PCI0_MEM_BASE	0x80000000
+#define CONFIG_SYS_PCI0_MEM_SIZE	_128M
+#define CONFIG_SYS_PCI1_MEM_BASE	0x88000000
+#define CONFIG_SYS_PCI1_MEM_SIZE	_128M
 
-#define CFG_PCI0_0_MEM_SPACE	(CFG_PCI0_MEM_BASE)
-#define CFG_PCI1_0_MEM_SPACE	(CFG_PCI1_MEM_BASE)
+#define CONFIG_SYS_PCI0_0_MEM_SPACE	(CONFIG_SYS_PCI0_MEM_BASE)
+#define CONFIG_SYS_PCI1_0_MEM_SPACE	(CONFIG_SYS_PCI1_MEM_BASE)
 
 /* PCI I/O MAP section */
-#define CFG_PCI0_IO_BASE	0xfa000000
-#define CFG_PCI0_IO_SIZE	_16M
-#define CFG_PCI1_IO_BASE	0xfb000000
-#define CFG_PCI1_IO_SIZE	_16M
+#define CONFIG_SYS_PCI0_IO_BASE	0xfa000000
+#define CONFIG_SYS_PCI0_IO_SIZE	_16M
+#define CONFIG_SYS_PCI1_IO_BASE	0xfb000000
+#define CONFIG_SYS_PCI1_IO_SIZE	_16M
 
-#define CFG_PCI0_IO_SPACE	(CFG_PCI0_IO_BASE)
-#define CFG_PCI0_IO_SPACE_PCI	(CFG_PCI0_IO_BASE) /* ronen we want phy=bus 0x00000000 */
-#define CFG_PCI1_IO_SPACE	(CFG_PCI1_IO_BASE)
-#define CFG_PCI1_IO_SPACE_PCI	(CFG_PCI1_IO_BASE) /* ronen we want phy=bus 0x00000000 */
+#define CONFIG_SYS_PCI0_IO_SPACE	(CONFIG_SYS_PCI0_IO_BASE)
+#define CONFIG_SYS_PCI0_IO_SPACE_PCI	(CONFIG_SYS_PCI0_IO_BASE) /* ronen we want phy=bus 0x00000000 */
+#define CONFIG_SYS_PCI1_IO_SPACE	(CONFIG_SYS_PCI1_IO_BASE)
+#define CONFIG_SYS_PCI1_IO_SPACE_PCI	(CONFIG_SYS_PCI1_IO_BASE) /* ronen we want phy=bus 0x00000000 */
 
 #if defined (CONFIG_750CX)
-#define CFG_PCI_IDSEL 0x0
+#define CONFIG_SYS_PCI_IDSEL 0x0
 #else
-#define CFG_PCI_IDSEL 0x30
+#define CONFIG_SYS_PCI_IDSEL 0x30
 #endif
 /*----------------------------------------------------------------------
  * Initial BAT mappings
@@ -448,28 +448,28 @@ ip=${ipaddr}:${serverip}${bootargs_end}; bootm 0x400000;\0"
  */
 
 /* SDRAM */
-#define CFG_IBAT0L (CFG_SDRAM_BASE | BATL_PP_RW | BATL_CACHEINHIBIT)
-#define CFG_IBAT0U (CFG_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
-#define CFG_DBAT0L (CFG_SDRAM_BASE | BATL_PP_RW | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
-#define CFG_DBAT0U CFG_IBAT0U
+#define CONFIG_SYS_IBAT0L (CONFIG_SYS_SDRAM_BASE | BATL_PP_RW | BATL_CACHEINHIBIT)
+#define CONFIG_SYS_IBAT0U (CONFIG_SYS_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CONFIG_SYS_DBAT0L (CONFIG_SYS_SDRAM_BASE | BATL_PP_RW | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
+#define CONFIG_SYS_DBAT0U CONFIG_SYS_IBAT0U
 
 /* init ram */
-#define CFG_IBAT1L  (CFG_INIT_RAM_ADDR | BATL_PP_RW | BATL_MEMCOHERENCE)
-#define CFG_IBAT1U  (CFG_INIT_RAM_ADDR | BATU_BL_256K | BATU_VS | BATU_VP)
-#define CFG_DBAT1L  CFG_IBAT1L
-#define CFG_DBAT1U  CFG_IBAT1U
+#define CONFIG_SYS_IBAT1L  (CONFIG_SYS_INIT_RAM_ADDR | BATL_PP_RW | BATL_MEMCOHERENCE)
+#define CONFIG_SYS_IBAT1U  (CONFIG_SYS_INIT_RAM_ADDR | BATU_BL_256K | BATU_VS | BATU_VP)
+#define CONFIG_SYS_DBAT1L  CONFIG_SYS_IBAT1L
+#define CONFIG_SYS_DBAT1U  CONFIG_SYS_IBAT1U
 
 /* PCI0, PCI1 in one BAT */
-#define CFG_IBAT2L BATL_NO_ACCESS
-#define CFG_IBAT2U CFG_DBAT2U
-#define CFG_DBAT2L (CFG_PCI0_MEM_BASE | BATL_CACHEINHIBIT | BATL_PP_RW | BATL_GUARDEDSTORAGE)
-#define CFG_DBAT2U (CFG_PCI0_MEM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CONFIG_SYS_IBAT2L BATL_NO_ACCESS
+#define CONFIG_SYS_IBAT2U CONFIG_SYS_DBAT2U
+#define CONFIG_SYS_DBAT2L (CONFIG_SYS_PCI0_MEM_BASE | BATL_CACHEINHIBIT | BATL_PP_RW | BATL_GUARDEDSTORAGE)
+#define CONFIG_SYS_DBAT2U (CONFIG_SYS_PCI0_MEM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
 
 /* GT regs, bootrom, all the devices, PCI I/O */
-#define CFG_IBAT3L (CFG_MISC_REGION_BASE | BATL_CACHEINHIBIT | BATL_PP_RW)
-#define CFG_IBAT3U (CFG_MISC_REGION_BASE | BATU_VS | BATU_VP | BATU_BL_256M)
-#define CFG_DBAT3L (CFG_MISC_REGION_BASE | BATL_CACHEINHIBIT | BATL_PP_RW | BATL_GUARDEDSTORAGE)
-#define CFG_DBAT3U CFG_IBAT3U
+#define CONFIG_SYS_IBAT3L (CONFIG_SYS_MISC_REGION_BASE | BATL_CACHEINHIBIT | BATL_PP_RW)
+#define CONFIG_SYS_IBAT3U (CONFIG_SYS_MISC_REGION_BASE | BATU_VS | BATU_VP | BATU_BL_256M)
+#define CONFIG_SYS_DBAT3L (CONFIG_SYS_MISC_REGION_BASE | BATL_CACHEINHIBIT | BATL_PP_RW | BATL_GUARDEDSTORAGE)
+#define CONFIG_SYS_DBAT3U CONFIG_SYS_IBAT3U
 
 /* I2C addresses for the two DIMM SPD chips */
 #define DIMM0_I2C_ADDR	0x56
@@ -480,35 +480,35 @@ ip=${ipaddr}:${serverip}${bootargs_end}; bootm 0x400000;\0"
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define CFG_BOOTMAPSZ		(8<<20) /* Initial Memory map for Linux */
+#define CONFIG_SYS_BOOTMAPSZ		(8<<20) /* Initial Memory map for Linux */
 
 /*-----------------------------------------------------------------------
  * FLASH organization
  */
-#define CFG_MAX_FLASH_BANKS	2	/* max number of memory banks	*/
-#define CFG_MAX_FLASH_SECT	67	/* max number of sectors on one chip */
+#define CONFIG_SYS_MAX_FLASH_BANKS	2	/* max number of memory banks	*/
+#define CONFIG_SYS_MAX_FLASH_SECT	67	/* max number of sectors on one chip */
 
-#define CFG_EXTRA_FLASH_DEVICE	DEVICE3 /* extra flash at device 3 */
-#define CFG_EXTRA_FLASH_WIDTH	4	/* 32 bit */
-#define CFG_BOOT_FLASH_WIDTH	1	/* 8 bit */
+#define CONFIG_SYS_EXTRA_FLASH_DEVICE	DEVICE3 /* extra flash at device 3 */
+#define CONFIG_SYS_EXTRA_FLASH_WIDTH	4	/* 32 bit */
+#define CONFIG_SYS_BOOT_FLASH_WIDTH	1	/* 8 bit */
 
-#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms) */
-#define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms) */
-#define CFG_FLASH_LOCK_TOUT	500	/* Timeout for Flash Lock (in ms) */
-#define CFG_FLASH_CFI		1
+#define CONFIG_SYS_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms) */
+#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms) */
+#define CONFIG_SYS_FLASH_LOCK_TOUT	500	/* Timeout for Flash Lock (in ms) */
+#define CONFIG_SYS_FLASH_CFI		1
 
-#define CFG_ENV_IS_IN_FLASH	1
-#define CFG_ENV_SIZE		0x1000	/* Total Size of Environment Sector */
-#define CFG_ENV_SECT_SIZE	0x10000
-#define CFG_ENV_ADDR	      0xFFF78000 /* Marvell 8-Bit Bootflash last sector */
-/* #define CFG_ENV_ADDR	   (CFG_FLASH_BASE+CFG_MONITOR_LEN-CFG_ENV_SECT_SIZE) */
+#define CONFIG_ENV_IS_IN_FLASH	1
+#define CONFIG_ENV_SIZE		0x1000	/* Total Size of Environment Sector */
+#define CONFIG_ENV_SECT_SIZE	0x10000
+#define CONFIG_ENV_ADDR	      0xFFF78000 /* Marvell 8-Bit Bootflash last sector */
+/* #define CONFIG_ENV_ADDR	   (CONFIG_SYS_FLASH_BASE+CONFIG_SYS_MONITOR_LEN-CONFIG_ENV_SECT_SIZE) */
 
 /*-----------------------------------------------------------------------
  * Cache Configuration
  */
-#define CFG_CACHELINE_SIZE	32	/* For all MPC74xx CPUs		 */
+#define CONFIG_SYS_CACHELINE_SIZE	32	/* For all MPC74xx CPUs		 */
 #if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value */
+#define CONFIG_SYS_CACHELINE_SHIFT	5	/* log base 2 of the above value */
 #endif
 
 /*-----------------------------------------------------------------------
@@ -516,7 +516,7 @@ ip=${ipaddr}:${serverip}${bootargs_end}; bootm 0x400000;\0"
  * look in include/mpc74xx.h for the defines used here
  */
 
-#define CFG_L2
+#define CONFIG_SYS_L2
 
 
 #if defined (CONFIG_750CX) || defined (CONFIG_750FX)
@@ -540,6 +540,6 @@ ip=${ipaddr}:${serverip}${bootargs_end}; bootm 0x400000;\0"
 #define BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH */
 #define BOOTFLAG_WARM	0x02		/* Software reboot		    */
 
-#define CFG_BOARD_ASM_INIT	1
+#define CONFIG_SYS_BOARD_ASM_INIT	1
 
 #endif	/* __CONFIG_H */
diff --git a/include/configs/DK1C20.h b/include/configs/DK1C20.h
index fb0668907..6fdc56600 100644
--- a/include/configs/DK1C20.h
+++ b/include/configs/DK1C20.h
@@ -40,7 +40,7 @@
 #elif	defined(CONFIG_NIOS_STANDARD_32)
 #include <configs/DK1C20_standard_32.h>
 #else
-#error *** CFG_ERROR: you have to setup right NIOS CPU configuration
+#error *** CONFIG_SYS_ERROR: you have to setup right NIOS CPU configuration
 #endif
 
 /*------------------------------------------------------------------------
@@ -48,26 +48,26 @@
  *----------------------------------------------------------------------*/
 #define CONFIG_NIOS		1		/* NIOS-32 core		*/
 #define	CONFIG_DK1C20		1		/* Cyclone DK-1C20 board*/
-#define CONFIG_SYS_CLK_FREQ	CFG_NIOS_CPU_CLK/* 50 MHz core clock	*/
-#define	CFG_HZ			1000		/* 1 msec time tick	*/
-#undef  CFG_CLKS_IN_HZ
+#define CONFIG_SYS_CLK_FREQ	CONFIG_SYS_NIOS_CPU_CLK/* 50 MHz core clock	*/
+#define	CONFIG_SYS_HZ			1000		/* 1 msec time tick	*/
+#undef  CONFIG_SYS_CLKS_IN_HZ
 #define	CONFIG_BOARD_EARLY_INIT_F 1	/* enable early board-spec. init*/
 
 /*------------------------------------------------------------------------
  * BASE ADDRESSES / SIZE (Flash, SRAM, SDRAM)
  *----------------------------------------------------------------------*/
-#if	(CFG_NIOS_CPU_SDRAM_SIZE != 0)
+#if	(CONFIG_SYS_NIOS_CPU_SDRAM_SIZE != 0)
 
-#define CFG_SDRAM_BASE		CFG_NIOS_CPU_SDRAM_BASE
-#define CFG_SDRAM_SIZE		CFG_NIOS_CPU_SDRAM_SIZE
+#define CONFIG_SYS_SDRAM_BASE		CONFIG_SYS_NIOS_CPU_SDRAM_BASE
+#define CONFIG_SYS_SDRAM_SIZE		CONFIG_SYS_NIOS_CPU_SDRAM_SIZE
 
 #else
-#error *** CFG_ERROR: you have to setup any SDRAM in NIOS CPU config
+#error *** CONFIG_SYS_ERROR: you have to setup any SDRAM in NIOS CPU config
 #endif
 
-#define CFG_SRAM_BASE		CFG_NIOS_CPU_SRAM_BASE
-#define CFG_SRAM_SIZE		CFG_NIOS_CPU_SRAM_SIZE
-#define CFG_VECT_BASE		CFG_NIOS_CPU_VEC_BASE
+#define CONFIG_SYS_SRAM_BASE		CONFIG_SYS_NIOS_CPU_SRAM_BASE
+#define CONFIG_SYS_SRAM_SIZE		CONFIG_SYS_NIOS_CPU_SRAM_SIZE
+#define CONFIG_SYS_VECT_BASE		CONFIG_SYS_NIOS_CPU_VEC_BASE
 
 /*------------------------------------------------------------------------
  * MEMORY ORGANIZATION - For the most part, you can put things pretty
@@ -80,163 +80,163 @@
  *	-Global data is placed below the heap.
  *	-The stack is placed below global data (&grows down).
  *----------------------------------------------------------------------*/
-#define CFG_MONITOR_LEN		(256 * 1024)	/* Reserve 256k		*/
-#define CFG_GBL_DATA_SIZE	128		/* Global data size rsvd*/
-#define CFG_MALLOC_LEN		(CFG_ENV_SIZE + 128*1024)
+#define CONFIG_SYS_MONITOR_LEN		(256 * 1024)	/* Reserve 256k		*/
+#define CONFIG_SYS_GBL_DATA_SIZE	128		/* Global data size rsvd*/
+#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + 128*1024)
 
-#define CFG_MONITOR_BASE	TEXT_BASE
-#define CFG_MALLOC_BASE		(CFG_MONITOR_BASE - CFG_MALLOC_LEN)
-#define CFG_GBL_DATA_OFFSET	(CFG_MALLOC_BASE - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP		CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_MONITOR_BASE	TEXT_BASE
+#define CONFIG_SYS_MALLOC_BASE		(CONFIG_SYS_MONITOR_BASE - CONFIG_SYS_MALLOC_LEN)
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_MALLOC_BASE - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP		CONFIG_SYS_GBL_DATA_OFFSET
 
 /*------------------------------------------------------------------------
  * FLASH (AM29LV065D)
  *----------------------------------------------------------------------*/
-#if	(CFG_NIOS_CPU_FLASH_SIZE != 0)
+#if	(CONFIG_SYS_NIOS_CPU_FLASH_SIZE != 0)
 
-#define CFG_FLASH_BASE		CFG_NIOS_CPU_FLASH_BASE
-#define CFG_FLASH_SIZE		CFG_NIOS_CPU_FLASH_SIZE
-#define CFG_MAX_FLASH_SECT	128		/* Max # sects per bank */
-#define CFG_MAX_FLASH_BANKS	1		/* Max # of flash banks */
-#define CFG_FLASH_ERASE_TOUT	8000		/* Erase timeout (msec) */
-#define CFG_FLASH_WRITE_TOUT	100		/* Write timeout (msec) */
-#define CFG_FLASH_WORD_SIZE	unsigned char	/* flash word size	*/
+#define CONFIG_SYS_FLASH_BASE		CONFIG_SYS_NIOS_CPU_FLASH_BASE
+#define CONFIG_SYS_FLASH_SIZE		CONFIG_SYS_NIOS_CPU_FLASH_SIZE
+#define CONFIG_SYS_MAX_FLASH_SECT	128		/* Max # sects per bank */
+#define CONFIG_SYS_MAX_FLASH_BANKS	1		/* Max # of flash banks */
+#define CONFIG_SYS_FLASH_ERASE_TOUT	8000		/* Erase timeout (msec) */
+#define CONFIG_SYS_FLASH_WRITE_TOUT	100		/* Write timeout (msec) */
+#define CONFIG_SYS_FLASH_WORD_SIZE	unsigned char	/* flash word size	*/
 
 #else
-#error *** CFG_ERROR: you have to setup any Flash memory in NIOS CPU config
+#error *** CONFIG_SYS_ERROR: you have to setup any Flash memory in NIOS CPU config
 #endif
 
 /*------------------------------------------------------------------------
  * ENVIRONMENT
  *----------------------------------------------------------------------*/
-#if	(CFG_NIOS_CPU_FLASH_SIZE != 0)
+#if	(CONFIG_SYS_NIOS_CPU_FLASH_SIZE != 0)
 
-#define	CFG_ENV_IS_IN_FLASH	1		/* Environment in flash */
-#define CFG_ENV_ADDR		CFG_FLASH_BASE	/* Mem addr of env	*/
-#define CFG_ENV_SIZE		(64 * 1024)	/* 64 KByte (1 sector)	*/
+#define	CONFIG_ENV_IS_IN_FLASH	1		/* Environment in flash */
+#define CONFIG_ENV_ADDR		CONFIG_SYS_FLASH_BASE	/* Mem addr of env	*/
+#define CONFIG_ENV_SIZE		(64 * 1024)	/* 64 KByte (1 sector)	*/
 #define CONFIG_ENV_OVERWRITE			/* Serial/eth change Ok */
 
 #else
-#define	CFG_ENV_IS_NOWHERE	1		/* NO Environment	*/
+#define	CONFIG_ENV_IS_NOWHERE	1		/* NO Environment	*/
 #endif
 
 /*------------------------------------------------------------------------
  * CONSOLE
  *----------------------------------------------------------------------*/
-#if	(CFG_NIOS_CPU_UART_NUMS != 0)
+#if	(CONFIG_SYS_NIOS_CPU_UART_NUMS != 0)
 
-#define CFG_NIOS_CONSOLE	CFG_NIOS_CPU_UART0 /* 1st UART is Cons. */
+#define CONFIG_SYS_NIOS_CONSOLE	CONFIG_SYS_NIOS_CPU_UART0 /* 1st UART is Cons. */
 
-#if	(CFG_NIOS_CPU_UART0_BR != 0)
-#define CFG_NIOS_FIXEDBAUD	1		   /* Baudrate is fixed	*/
-#define CONFIG_BAUDRATE		CFG_NIOS_CPU_UART0_BR
+#if	(CONFIG_SYS_NIOS_CPU_UART0_BR != 0)
+#define CONFIG_SYS_NIOS_FIXEDBAUD	1		   /* Baudrate is fixed	*/
+#define CONFIG_BAUDRATE		CONFIG_SYS_NIOS_CPU_UART0_BR
 #else
-#undef	CFG_NIOS_FIXEDBAUD
+#undef	CONFIG_SYS_NIOS_FIXEDBAUD
 #define CONFIG_BAUDRATE		115200
 #endif
 
-#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
 
 #else
-#error *** CFG_ERROR: you have to setup at least one UART in NIOS CPU config
+#error *** CONFIG_SYS_ERROR: you have to setup at least one UART in NIOS CPU config
 #endif
 
 /*------------------------------------------------------------------------
  * TIMER FOR TIMEBASE -- Nios doesn't have the equivalent of ppc  PIT,
  * so an avalon bus timer is required.
  *----------------------------------------------------------------------*/
-#if	(CFG_NIOS_CPU_TIMER_NUMS != 0)
+#if	(CONFIG_SYS_NIOS_CPU_TIMER_NUMS != 0)
 
-#if	(CFG_NIOS_CPU_TICK_TIMER == 0)
+#if	(CONFIG_SYS_NIOS_CPU_TICK_TIMER == 0)
 
-#define CFG_NIOS_TMRBASE	CFG_NIOS_CPU_TIMER0 /* TIMER0 as tick	*/
-#define CFG_NIOS_TMRIRQ		CFG_NIOS_CPU_TIMER0_IRQ
+#define CONFIG_SYS_NIOS_TMRBASE	CONFIG_SYS_NIOS_CPU_TIMER0 /* TIMER0 as tick	*/
+#define CONFIG_SYS_NIOS_TMRIRQ		CONFIG_SYS_NIOS_CPU_TIMER0_IRQ
 
-#if	(CFG_NIOS_CPU_TIMER0_FP == 1)		    /* fixed period */
+#if	(CONFIG_SYS_NIOS_CPU_TIMER0_FP == 1)		    /* fixed period */
 
-#if	(CFG_NIOS_CPU_TIMER0_PER >= CFG_HZ)
-#define CFG_NIOS_TMRMS		(CFG_NIOS_CPU_TIMER0_PER / CFG_HZ)
+#if	(CONFIG_SYS_NIOS_CPU_TIMER0_PER >= CONFIG_SYS_HZ)
+#define CONFIG_SYS_NIOS_TMRMS		(CONFIG_SYS_NIOS_CPU_TIMER0_PER / CONFIG_SYS_HZ)
 #else
-#error *** CFG_ERROR: you have to use a timer periode greater than CFG_HZ
+#error *** CONFIG_SYS_ERROR: you have to use a timer periode greater than CONFIG_SYS_HZ
 #endif
 
-#undef	CFG_NIOS_TMRCNT	/* no preloadable counter value */
+#undef	CONFIG_SYS_NIOS_TMRCNT	/* no preloadable counter value */
 
-#elif	(CFG_NIOS_CPU_TIMER0_FP == 0)		    /* variable period */
+#elif	(CONFIG_SYS_NIOS_CPU_TIMER0_FP == 0)		    /* variable period */
 
-#if	(CFG_HZ <= 1000)
-#define CFG_NIOS_TMRMS		(1000 / CFG_HZ)
+#if	(CONFIG_SYS_HZ <= 1000)
+#define CONFIG_SYS_NIOS_TMRMS		(1000 / CONFIG_SYS_HZ)
 #else
-#error *** CFG_ERROR: sorry, CFG_HZ have to be less than 1000
+#error *** CONFIG_SYS_ERROR: sorry, CONFIG_SYS_HZ have to be less than 1000
 #endif
 
-#define	CFG_NIOS_TMRCNT		(CONFIG_SYS_CLK_FREQ / CFG_HZ)
+#define	CONFIG_SYS_NIOS_TMRCNT		(CONFIG_SYS_CLK_FREQ / CONFIG_SYS_HZ)
 
 #else
-#error *** CFG_ERROR: you have to define CFG_NIOS_CPU_TIMER0_FP correct
+#error *** CONFIG_SYS_ERROR: you have to define CONFIG_SYS_NIOS_CPU_TIMER0_FP correct
 #endif
 
-#elif	(CFG_NIOS_CPU_TICK_TIMER == 1)
+#elif	(CONFIG_SYS_NIOS_CPU_TICK_TIMER == 1)
 
-#define CFG_NIOS_TMRBASE	CFG_NIOS_CPU_TIMER1 /* TIMER1 as tick	*/
-#define CFG_NIOS_TMRIRQ		CFG_NIOS_CPU_TIMER1_IRQ
+#define CONFIG_SYS_NIOS_TMRBASE	CONFIG_SYS_NIOS_CPU_TIMER1 /* TIMER1 as tick	*/
+#define CONFIG_SYS_NIOS_TMRIRQ		CONFIG_SYS_NIOS_CPU_TIMER1_IRQ
 
-#if	(CFG_NIOS_CPU_TIMER1_FP == 1)		    /* fixed period */
+#if	(CONFIG_SYS_NIOS_CPU_TIMER1_FP == 1)		    /* fixed period */
 
-#if	(CFG_NIOS_CPU_TIMER1_PER >= CFG_HZ)
-#define CFG_NIOS_TMRMS		(CFG_NIOS_CPU_TIMER1_PER / CFG_HZ)
+#if	(CONFIG_SYS_NIOS_CPU_TIMER1_PER >= CONFIG_SYS_HZ)
+#define CONFIG_SYS_NIOS_TMRMS		(CONFIG_SYS_NIOS_CPU_TIMER1_PER / CONFIG_SYS_HZ)
 #else
-#error *** CFG_ERROR: you have to use a timer periode greater than CFG_HZ
+#error *** CONFIG_SYS_ERROR: you have to use a timer periode greater than CONFIG_SYS_HZ
 #endif
 
-#undef	CFG_NIOS_TMRCNT	/* no preloadable counter value */
+#undef	CONFIG_SYS_NIOS_TMRCNT	/* no preloadable counter value */
 
-#elif	(CFG_NIOS_CPU_TIMER1_FP == 0)		    /* variable period */
+#elif	(CONFIG_SYS_NIOS_CPU_TIMER1_FP == 0)		    /* variable period */
 
-#if	(CFG_HZ <= 1000)
-#define CFG_NIOS_TMRMS		(1000 / CFG_HZ)
+#if	(CONFIG_SYS_HZ <= 1000)
+#define CONFIG_SYS_NIOS_TMRMS		(1000 / CONFIG_SYS_HZ)
 #else
-#error *** CFG_ERROR: sorry, CFG_HZ have to be less than 1000
+#error *** CONFIG_SYS_ERROR: sorry, CONFIG_SYS_HZ have to be less than 1000
 #endif
 
-#define	CFG_NIOS_TMRCNT		(CONFIG_SYS_CLK_FREQ / CFG_HZ)
+#define	CONFIG_SYS_NIOS_TMRCNT		(CONFIG_SYS_CLK_FREQ / CONFIG_SYS_HZ)
 
 #else
-#error *** CFG_ERROR: you have to define CFG_NIOS_CPU_TIMER1_FP correct
+#error *** CONFIG_SYS_ERROR: you have to define CONFIG_SYS_NIOS_CPU_TIMER1_FP correct
 #endif
 
-#endif	/* CFG_NIOS_CPU_TICK_TIMER */
+#endif	/* CONFIG_SYS_NIOS_CPU_TICK_TIMER */
 
 #else
-#error *** CFG_ERROR: you have to setup at least one TIMER in NIOS CPU config
+#error *** CONFIG_SYS_ERROR: you have to setup at least one TIMER in NIOS CPU config
 #endif
 
 /*------------------------------------------------------------------------
  * Ethernet
  *----------------------------------------------------------------------*/
-#if	(CFG_NIOS_CPU_LAN_NUMS == 1)
+#if	(CONFIG_SYS_NIOS_CPU_LAN_NUMS == 1)
 
-#if	(CFG_NIOS_CPU_LAN0_TYPE == 0)		/* LAN91C111		*/
+#if	(CONFIG_SYS_NIOS_CPU_LAN0_TYPE == 0)		/* LAN91C111		*/
 
 #define	CONFIG_DRIVER_SMC91111			/* Using SMC91c111	*/
 #undef	CONFIG_SMC91111_EXT_PHY			/* Internal PHY		*/
-#define	CONFIG_SMC91111_BASE	(CFG_NIOS_CPU_LAN0_BASE + CFG_NIOS_CPU_LAN0_OFFS)
+#define	CONFIG_SMC91111_BASE	(CONFIG_SYS_NIOS_CPU_LAN0_BASE + CONFIG_SYS_NIOS_CPU_LAN0_OFFS)
 
-#if	(CFG_NIOS_CPU_LAN0_BUSW == 32)
+#if	(CONFIG_SYS_NIOS_CPU_LAN0_BUSW == 32)
 #define	CONFIG_SMC_USE_32_BIT	1
 #else	/* no */
 #undef	CONFIG_SMC_USE_32_BIT
 #endif
 
-#elif	(CFG_NIOS_CPU_LAN0_TYPE == 1)		/* CS8900A		*/
+#elif	(CONFIG_SYS_NIOS_CPU_LAN0_TYPE == 1)		/* CS8900A		*/
 
 	/********************************************/
 	/* !!! CS8900 is __not__ tested on NIOS !!! */
 	/********************************************/
 #define	CONFIG_DRIVER_CS8900			/* Using CS8900		*/
-#define	CS8900_BASE		(CFG_NIOS_CPU_LAN0_BASE + CFG_NIOS_CPU_LAN0_OFFS)
+#define	CS8900_BASE		(CONFIG_SYS_NIOS_CPU_LAN0_BASE + CONFIG_SYS_NIOS_CPU_LAN0_OFFS)
 
-#if	(CFG_NIOS_CPU_LAN0_BUSW == 32)
+#if	(CONFIG_SYS_NIOS_CPU_LAN0_BUSW == 32)
 #undef	CS8900_BUS16
 #define	CS8900_BUS32		1
 #else	/* no */
@@ -245,7 +245,7 @@
 #endif
 
 #else
-#error *** CFG_ERROR: invalid LAN0 chip type, check your NIOS CPU config
+#error *** CONFIG_SYS_ERROR: invalid LAN0 chip type, check your NIOS CPU config
 #endif
 
 #define CONFIG_ETHADDR		08:00:3e:26:0a:5b
@@ -254,64 +254,64 @@
 #define CONFIG_SERVERIP		192.168.2.16
 
 #else
-#error *** CFG_ERROR: you have to setup just one LAN only or expand your config.h
+#error *** CONFIG_SYS_ERROR: you have to setup just one LAN only or expand your config.h
 #endif
 
 /*------------------------------------------------------------------------
  * STATUS LEDs
  *----------------------------------------------------------------------*/
-#if	(CFG_NIOS_CPU_PIO_NUMS != 0)
+#if	(CONFIG_SYS_NIOS_CPU_PIO_NUMS != 0)
 
-#if	(CFG_NIOS_CPU_LED_PIO == 0)
+#if	(CONFIG_SYS_NIOS_CPU_LED_PIO == 0)
 
-#error *** CFG_ERROR: status LEDs at PIO0 not supported, expand your config.h
+#error *** CONFIG_SYS_ERROR: status LEDs at PIO0 not supported, expand your config.h
 
-#elif	(CFG_NIOS_CPU_LED_PIO == 1)
+#elif	(CONFIG_SYS_NIOS_CPU_LED_PIO == 1)
 
-#error *** CFG_ERROR: status LEDs at PIO1 not supported, expand your config.h
+#error *** CONFIG_SYS_ERROR: status LEDs at PIO1 not supported, expand your config.h
 
-#elif	(CFG_NIOS_CPU_LED_PIO == 2)
+#elif	(CONFIG_SYS_NIOS_CPU_LED_PIO == 2)
 
-#define	STATUS_LED_BASE			CFG_NIOS_CPU_PIO2
-#define	STATUS_LED_BITS			CFG_NIOS_CPU_PIO2_BITS
+#define	STATUS_LED_BASE			CONFIG_SYS_NIOS_CPU_PIO2
+#define	STATUS_LED_BITS			CONFIG_SYS_NIOS_CPU_PIO2_BITS
 #define	STATUS_LED_ACTIVE		1 /* LED on for bit == 1 */
 
-#if	(CFG_NIOS_CPU_PIO2_TYPE == 1)
+#if	(CONFIG_SYS_NIOS_CPU_PIO2_TYPE == 1)
 #define	STATUS_LED_WRONLY		1
 #else
 #undef	STATUS_LED_WRONLY
 #endif
 
-#elif	(CFG_NIOS_CPU_LED_PIO == 3)
+#elif	(CONFIG_SYS_NIOS_CPU_LED_PIO == 3)
 
-#error *** CFG_ERROR: status LEDs at PIO3 not supported, expand your config.h
+#error *** CONFIG_SYS_ERROR: status LEDs at PIO3 not supported, expand your config.h
 
-#elif	(CFG_NIOS_CPU_LED_PIO == 4)
+#elif	(CONFIG_SYS_NIOS_CPU_LED_PIO == 4)
 
-#error *** CFG_ERROR: status LEDs at PIO4 not supported, expand your config.h
+#error *** CONFIG_SYS_ERROR: status LEDs at PIO4 not supported, expand your config.h
 
-#elif	(CFG_NIOS_CPU_LED_PIO == 5)
+#elif	(CONFIG_SYS_NIOS_CPU_LED_PIO == 5)
 
-#error *** CFG_ERROR: status LEDs at PIO5 not supported, expand your config.h
+#error *** CONFIG_SYS_ERROR: status LEDs at PIO5 not supported, expand your config.h
 
-#elif	(CFG_NIOS_CPU_LED_PIO == 6)
+#elif	(CONFIG_SYS_NIOS_CPU_LED_PIO == 6)
 
-#error *** CFG_ERROR: status LEDs at PIO6 not supported, expand your config.h
+#error *** CONFIG_SYS_ERROR: status LEDs at PIO6 not supported, expand your config.h
 
-#elif	(CFG_NIOS_CPU_LED_PIO == 7)
+#elif	(CONFIG_SYS_NIOS_CPU_LED_PIO == 7)
 
-#error *** CFG_ERROR: status LEDs at PIO7 not supported, expand your config.h
+#error *** CONFIG_SYS_ERROR: status LEDs at PIO7 not supported, expand your config.h
 
-#elif	(CFG_NIOS_CPU_LED_PIO == 8)
+#elif	(CONFIG_SYS_NIOS_CPU_LED_PIO == 8)
 
-#error *** CFG_ERROR: status LEDs at PIO8 not supported, expand your config.h
+#error *** CONFIG_SYS_ERROR: status LEDs at PIO8 not supported, expand your config.h
 
-#elif	(CFG_NIOS_CPU_LED_PIO == 9)
+#elif	(CONFIG_SYS_NIOS_CPU_LED_PIO == 9)
 
-#error *** CFG_ERROR: status LEDs at PIO9 not supported, expand your config.h
+#error *** CONFIG_SYS_ERROR: status LEDs at PIO9 not supported, expand your config.h
 
 #else
-#error *** CFG_ERROR: you have to set CFG_NIOS_CPU_LED_PIO in right case
+#error *** CONFIG_SYS_ERROR: you have to set CONFIG_SYS_NIOS_CPU_LED_PIO in right case
 #endif
 
 #define	CONFIG_STATUS_LED		1 /* enable status led driver */
@@ -319,89 +319,89 @@
 #define	STATUS_LED_BIT			(1 << 0)	/* LED[0] */
 #define	STATUS_LED_STATE		STATUS_LED_BLINKING
 #define	STATUS_LED_BOOT_STATE		STATUS_LED_OFF
-#define	STATUS_LED_PERIOD		(CFG_HZ / 10)	/* ca. 1 Hz */
+#define	STATUS_LED_PERIOD		(CONFIG_SYS_HZ / 10)	/* ca. 1 Hz */
 #define	STATUS_LED_BOOT			0		/* boot LED */
 
 #if	(STATUS_LED_BITS > 1)
 #define	STATUS_LED_BIT1			(1 << 1)	/* LED[1] */
 #define	STATUS_LED_STATE1		STATUS_LED_OFF
-#define	STATUS_LED_PERIOD1		(CFG_HZ / 50)	/* ca. 5 Hz */
+#define	STATUS_LED_PERIOD1		(CONFIG_SYS_HZ / 50)	/* ca. 5 Hz */
 #define	STATUS_LED_RED			1		/* fail LED */
 #endif
 
 #if	(STATUS_LED_BITS > 2)
 #define	STATUS_LED_BIT2			(1 << 2)	/* LED[2] */
 #define	STATUS_LED_STATE2		STATUS_LED_OFF
-#define	STATUS_LED_PERIOD2		(CFG_HZ / 10)	/* ca. 1 Hz */
+#define	STATUS_LED_PERIOD2		(CONFIG_SYS_HZ / 10)	/* ca. 1 Hz */
 #define	STATUS_LED_YELLOW		2		/* info LED */
 #endif
 
 #if	(STATUS_LED_BITS > 3)
 #define	STATUS_LED_BIT3			(1 << 3)	/* LED[3] */
 #define	STATUS_LED_STATE3		STATUS_LED_OFF
-#define	STATUS_LED_PERIOD3		(CFG_HZ / 10)	/* ca. 1 Hz */
+#define	STATUS_LED_PERIOD3		(CONFIG_SYS_HZ / 10)	/* ca. 1 Hz */
 #define	STATUS_LED_GREEN		3		/* info LED */
 #endif
 
 #define	STATUS_LED_PAR			1 /* makes status_led.h happy */
 
-#endif	/* CFG_NIOS_CPU_PIO_NUMS */
+#endif	/* CONFIG_SYS_NIOS_CPU_PIO_NUMS */
 
 /*------------------------------------------------------------------------
  * SEVEN SEGMENT LED DISPLAY
  *----------------------------------------------------------------------*/
-#if	(CFG_NIOS_CPU_PIO_NUMS != 0)
+#if	(CONFIG_SYS_NIOS_CPU_PIO_NUMS != 0)
 
-#if	(CFG_NIOS_CPU_SEVENSEG_PIO == 0)
+#if	(CONFIG_SYS_NIOS_CPU_SEVENSEG_PIO == 0)
 
-#error *** CFG_ERROR: seven segment display at PIO0 not supported, expand your config.h
+#error *** CONFIG_SYS_ERROR: seven segment display at PIO0 not supported, expand your config.h
 
-#elif	(CFG_NIOS_CPU_SEVENSEG_PIO == 1)
+#elif	(CONFIG_SYS_NIOS_CPU_SEVENSEG_PIO == 1)
 
-#error *** CFG_ERROR: seven segment display at PIO1 not supported, expand your config.h
+#error *** CONFIG_SYS_ERROR: seven segment display at PIO1 not supported, expand your config.h
 
-#elif	(CFG_NIOS_CPU_SEVENSEG_PIO == 2)
+#elif	(CONFIG_SYS_NIOS_CPU_SEVENSEG_PIO == 2)
 
-#error *** CFG_ERROR: seven segment display at PIO2 not supported, expand your config.h
+#error *** CONFIG_SYS_ERROR: seven segment display at PIO2 not supported, expand your config.h
 
-#elif	(CFG_NIOS_CPU_SEVENSEG_PIO == 3)
+#elif	(CONFIG_SYS_NIOS_CPU_SEVENSEG_PIO == 3)
 
-#define	SEVENSEG_BASE			CFG_NIOS_CPU_PIO3
-#define	SEVENSEG_BITS			CFG_NIOS_CPU_PIO3_BITS
+#define	SEVENSEG_BASE			CONFIG_SYS_NIOS_CPU_PIO3
+#define	SEVENSEG_BITS			CONFIG_SYS_NIOS_CPU_PIO3_BITS
 #define	SEVENSEG_ACTIVE			0 /* LED on for bit == 1 */
 
-#if	(CFG_NIOS_CPU_PIO3_TYPE == 1)
+#if	(CONFIG_SYS_NIOS_CPU_PIO3_TYPE == 1)
 #define	SEVENSEG_WRONLY			1
 #else
 #undef	SEVENSEG_WRONLY
 #endif
 
-#elif	(CFG_NIOS_CPU_SEVENSEG_PIO == 4)
+#elif	(CONFIG_SYS_NIOS_CPU_SEVENSEG_PIO == 4)
 
-#error *** CFG_ERROR: seven segment display at PIO4 not supported, expand your config.h
+#error *** CONFIG_SYS_ERROR: seven segment display at PIO4 not supported, expand your config.h
 
-#elif	(CFG_NIOS_CPU_SEVENSEG_PIO == 5)
+#elif	(CONFIG_SYS_NIOS_CPU_SEVENSEG_PIO == 5)
 
-#error *** CFG_ERROR: seven segment display at PIO5 not supported, expand your config.h
+#error *** CONFIG_SYS_ERROR: seven segment display at PIO5 not supported, expand your config.h
 
-#elif	(CFG_NIOS_CPU_SEVENSEG_PIO == 6)
+#elif	(CONFIG_SYS_NIOS_CPU_SEVENSEG_PIO == 6)
 
-#error *** CFG_ERROR: seven segment display at PIO6 not supported, expand your config.h
+#error *** CONFIG_SYS_ERROR: seven segment display at PIO6 not supported, expand your config.h
 
-#elif	(CFG_NIOS_CPU_SEVENSEG_PIO == 7)
+#elif	(CONFIG_SYS_NIOS_CPU_SEVENSEG_PIO == 7)
 
-#error *** CFG_ERROR: seven segment display at PIO7 not supported, expand your config.h
+#error *** CONFIG_SYS_ERROR: seven segment display at PIO7 not supported, expand your config.h
 
-#elif	(CFG_NIOS_CPU_SEVENSEG_PIO == 8)
+#elif	(CONFIG_SYS_NIOS_CPU_SEVENSEG_PIO == 8)
 
-#error *** CFG_ERROR: seven segment display at PIO8 not supported, expand your config.h
+#error *** CONFIG_SYS_ERROR: seven segment display at PIO8 not supported, expand your config.h
 
-#elif	(CFG_NIOS_CPU_SEVENSEG_PIO == 9)
+#elif	(CONFIG_SYS_NIOS_CPU_SEVENSEG_PIO == 9)
 
-#error *** CFG_ERROR: seven segment display at PIO9 not supported, expand your config.h
+#error *** CONFIG_SYS_ERROR: seven segment display at PIO9 not supported, expand your config.h
 
 #else
-#error *** CFG_ERROR: you have to set CFG_NIOS_CPU_SEVENSEG_PIO in right case
+#error *** CONFIG_SYS_ERROR: you have to set CONFIG_SYS_NIOS_CPU_SEVENSEG_PIO in right case
 #endif
 
 #define	CONFIG_SEVENSEG			1 /* enable seven segment led driver */
@@ -435,7 +435,7 @@
 #define	SEVENSEG_DIGIT_G		(1 << 0) /* bit 0 is segment G */
 #define	SEVENSEG_DIGIT_DP		(1 << 7) /* bit 7 is decimal point */
 
-#endif	/* CFG_NIOS_CPU_PIO_NUMS */
+#endif	/* CONFIG_SYS_NIOS_CPU_PIO_NUMS */
 
 /*------------------------------------------------------------------------
  * ASMI - Active Serial Memory Interface.
@@ -444,7 +444,7 @@
  * is loaded via JTAG or ASMI. Please see doc/README.dk1c20 for details.
  *----------------------------------------------------------------------*/
 #define CONFIG_NIOS_ASMI			   /* Enable ASMI	*/
-#define CFG_NIOS_ASMIBASE	CFG_NIOS_CPU_ASMI0 /* ASMI base address	*/
+#define CONFIG_SYS_NIOS_ASMIBASE	CONFIG_SYS_NIOS_CPU_ASMI0 /* ASMI base address	*/
 
 
 /*
@@ -485,21 +485,21 @@
  *----------------------------------------------------------------------*/
 #if defined(CONFIG_CMD_IDE)
 #define CONFIG_IDE_PREINIT			/* Implement id_preinit	*/
-#define CFG_IDE_MAXBUS		1		/* 1 IDE bus		*/
-#define CFG_IDE_MAXDEVICE	1		/* 1 drive per IDE bus	*/
-
-#define CFG_ATA_BASE_ADDR	0x00920a00	/* IDE/ATA base addr	*/
-#define CFG_ATA_IDE0_OFFSET	0x0000		/* IDE0 offset		*/
-#define CFG_ATA_DATA_OFFSET	0x0040		/* Data IO offset	*/
-#define CFG_ATA_REG_OFFSET	0x0040		/* Register offset	*/
-#define CFG_ATA_ALT_OFFSET	0x0100		/* Alternate reg offset	*/
-#define CFG_ATA_STRIDE          4		/* Width betwix addrs	*/
+#define CONFIG_SYS_IDE_MAXBUS		1		/* 1 IDE bus		*/
+#define CONFIG_SYS_IDE_MAXDEVICE	1		/* 1 drive per IDE bus	*/
+
+#define CONFIG_SYS_ATA_BASE_ADDR	0x00920a00	/* IDE/ATA base addr	*/
+#define CONFIG_SYS_ATA_IDE0_OFFSET	0x0000		/* IDE0 offset		*/
+#define CONFIG_SYS_ATA_DATA_OFFSET	0x0040		/* Data IO offset	*/
+#define CONFIG_SYS_ATA_REG_OFFSET	0x0040		/* Register offset	*/
+#define CONFIG_SYS_ATA_ALT_OFFSET	0x0100		/* Alternate reg offset	*/
+#define CONFIG_SYS_ATA_STRIDE          4		/* Width betwix addrs	*/
 #define CONFIG_DOS_PARTITION
 
 /* Board-specific cf regs */
-#define CFG_CF_PRESENT		0x009209b0	/* CF Present PIO base	*/
-#define CFG_CF_POWER		0x009209c0	/* CF Power FET PIO base*/
-#define CFG_CF_ATASEL		0x009209d0	/* CF ATASEL PIO base	*/
+#define CONFIG_SYS_CF_PRESENT		0x009209b0	/* CF Present PIO base	*/
+#define CONFIG_SYS_CF_POWER		0x009209c0	/* CF Power FET PIO base*/
+#define CONFIG_SYS_CF_ATASEL		0x009209d0	/* CF ATASEL PIO base	*/
 
 #endif
 
@@ -513,25 +513,25 @@
 /*------------------------------------------------------------------------
  * MISC
  *----------------------------------------------------------------------*/
-#define	CFG_LONGHELP			    /* undef to save memory	*/
-#define	CFG_PROMPT		"DK1C20 > " /* Monitor Command Prompt	*/
-#define	CFG_CBSIZE		256	    /* Console I/O Buffer Size	*/
-#define	CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define	CFG_MAXARGS		16	    /* max number of command args*/
-#define CFG_BARGSIZE		CFG_CBSIZE  /* Boot Argument Buffer Size */
-
-#if	(CFG_SRAM_SIZE != 0)
-#define	CFG_LOAD_ADDR		CFG_SRAM_BASE	/* Default load address	*/
+#define	CONFIG_SYS_LONGHELP			    /* undef to save memory	*/
+#define	CONFIG_SYS_PROMPT		"DK1C20 > " /* Monitor Command Prompt	*/
+#define	CONFIG_SYS_CBSIZE		256	    /* Console I/O Buffer Size	*/
+#define	CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define	CONFIG_SYS_MAXARGS		16	    /* max number of command args*/
+#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE  /* Boot Argument Buffer Size */
+
+#if	(CONFIG_SYS_SRAM_SIZE != 0)
+#define	CONFIG_SYS_LOAD_ADDR		CONFIG_SYS_SRAM_BASE	/* Default load address	*/
 #else
-#undef	CFG_LOAD_ADDR
+#undef	CONFIG_SYS_LOAD_ADDR
 #endif
 
-#if	(CFG_SDRAM_SIZE != 0)
-#define	CFG_MEMTEST_START	CFG_SDRAM_BASE	/* SDRAM til stack area */
-#define	CFG_MEMTEST_END		(CFG_INIT_SP - (1024 * 1024)) /* 1MB stack */
+#if	(CONFIG_SYS_SDRAM_SIZE != 0)
+#define	CONFIG_SYS_MEMTEST_START	CONFIG_SYS_SDRAM_BASE	/* SDRAM til stack area */
+#define	CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_INIT_SP - (1024 * 1024)) /* 1MB stack */
 #else
-#undef	CFG_MEMTEST_START
-#undef	CFG_MEMTEST_END
+#undef	CONFIG_SYS_MEMTEST_START
+#undef	CONFIG_SYS_MEMTEST_END
 #endif
 
 /*
diff --git a/include/configs/DK1C20_safe_32.h b/include/configs/DK1C20_safe_32.h
index a483e8766..86e4869f1 100644
--- a/include/configs/DK1C20_safe_32.h
+++ b/include/configs/DK1C20_safe_32.h
@@ -29,6 +29,6 @@
  *
  * !!! TODO !!! TODO !!!
  */
-#error *** CFG_ERROR: DK1C20_safe_32 have to be defined (use DK1C20_standard_32 as template)
+#error *** CONFIG_SYS_ERROR: DK1C20_safe_32 have to be defined (use DK1C20_standard_32 as template)
 
 #endif	/* __CONFIG_DK1C20_SAFE_32_H */
diff --git a/include/configs/DK1C20_standard_32.h b/include/configs/DK1C20_standard_32.h
index ed08121cc..c08aaae01 100644
--- a/include/configs/DK1C20_standard_32.h
+++ b/include/configs/DK1C20_standard_32.h
@@ -30,250 +30,250 @@
  * Here we must define CPU dependencies. Any unsupported option have to
  * be defined with zero, example CPU without data cache / OCI:
  *
- *	#define	CFG_NIOS_CPU_ICACHE	4096
- *	#define	CFG_NIOS_CPU_DCACHE	0
- *	#define	CFG_NIOS_CPU_OCI_BASE	0
- *	#define	CFG_NIOS_CPU_OCI_SIZE	0
+ *	#define	CONFIG_SYS_NIOS_CPU_ICACHE	4096
+ *	#define	CONFIG_SYS_NIOS_CPU_DCACHE	0
+ *	#define	CONFIG_SYS_NIOS_CPU_OCI_BASE	0
+ *	#define	CONFIG_SYS_NIOS_CPU_OCI_SIZE	0
  */
 
 /* CPU core */
-#define	CFG_NIOS_CPU_CLK	50000000	/* NIOS CPU clock	*/
-#define	CFG_NIOS_CPU_ICACHE	(4 * 1024)	/* instruction cache	*/
-#define	CFG_NIOS_CPU_DCACHE	(4 * 1024)	/* data cache		*/
-#define	CFG_NIOS_CPU_REG_NUMS	256		/* number of register	*/
-#define	CFG_NIOS_CPU_MUL	0		/* 16x16 MUL:	no(0)	*/
+#define	CONFIG_SYS_NIOS_CPU_CLK	50000000	/* NIOS CPU clock	*/
+#define	CONFIG_SYS_NIOS_CPU_ICACHE	(4 * 1024)	/* instruction cache	*/
+#define	CONFIG_SYS_NIOS_CPU_DCACHE	(4 * 1024)	/* data cache		*/
+#define	CONFIG_SYS_NIOS_CPU_REG_NUMS	256		/* number of register	*/
+#define	CONFIG_SYS_NIOS_CPU_MUL	0		/* 16x16 MUL:	no(0)	*/
 						/*		yes(1)	*/
-#define	CFG_NIOS_CPU_MSTEP	1		/* 16x16 MSTEP:	no(0)	*/
+#define	CONFIG_SYS_NIOS_CPU_MSTEP	1		/* 16x16 MSTEP:	no(0)	*/
 						/*		yes(1)	*/
-#define	CFG_NIOS_CPU_STACK	0x008fff00	/* stack top	addr	*/
-#define	CFG_NIOS_CPU_VEC_BASE	0x008fff00	/* IRQ vectors	addr	*/
-#define	CFG_NIOS_CPU_VEC_SIZE	256		/*		size	*/
-#define	CFG_NIOS_CPU_VEC_NUMS	64		/*		numbers	*/
-#define	CFG_NIOS_CPU_RST_VECT	0x00920000	/* RESET vector	addr	*/
-#define	CFG_NIOS_CPU_DBG_CORE	0		/* CPU debug:	no(0)	*/
+#define	CONFIG_SYS_NIOS_CPU_STACK	0x008fff00	/* stack top	addr	*/
+#define	CONFIG_SYS_NIOS_CPU_VEC_BASE	0x008fff00	/* IRQ vectors	addr	*/
+#define	CONFIG_SYS_NIOS_CPU_VEC_SIZE	256		/*		size	*/
+#define	CONFIG_SYS_NIOS_CPU_VEC_NUMS	64		/*		numbers	*/
+#define	CONFIG_SYS_NIOS_CPU_RST_VECT	0x00920000	/* RESET vector	addr	*/
+#define	CONFIG_SYS_NIOS_CPU_DBG_CORE	0		/* CPU debug:	no(0)	*/
 						/*		yes(1)	*/
 
 /* on-chip extensions */
-#define	CFG_NIOS_CPU_RAM_BASE	0		/* on chip RAM	addr	*/
-#define	CFG_NIOS_CPU_RAM_SIZE	0		/*		size	*/
+#define	CONFIG_SYS_NIOS_CPU_RAM_BASE	0		/* on chip RAM	addr	*/
+#define	CONFIG_SYS_NIOS_CPU_RAM_SIZE	0		/*		size	*/
 
-#define	CFG_NIOS_CPU_ROM_BASE	0x00920000	/* on chip ROM	addr	*/
-#define	CFG_NIOS_CPU_ROM_SIZE	(2 * 1024)	/*  2 KB	size	*/
+#define	CONFIG_SYS_NIOS_CPU_ROM_BASE	0x00920000	/* on chip ROM	addr	*/
+#define	CONFIG_SYS_NIOS_CPU_ROM_SIZE	(2 * 1024)	/*  2 KB	size	*/
 
-#define	CFG_NIOS_CPU_OCI_BASE	0x00920800	/* OCI core	addr	*/
-#define	CFG_NIOS_CPU_OCI_SIZE	256		/*		size	*/
+#define	CONFIG_SYS_NIOS_CPU_OCI_BASE	0x00920800	/* OCI core	addr	*/
+#define	CONFIG_SYS_NIOS_CPU_OCI_SIZE	256		/*		size	*/
 
 /* timer */
-#define	CFG_NIOS_CPU_TIMER_NUMS	2		/* number of timer	*/
+#define	CONFIG_SYS_NIOS_CPU_TIMER_NUMS	2		/* number of timer	*/
 
-#define	CFG_NIOS_CPU_TIMER0	0x00920940	/* TIMER0	addr	*/
-#define	CFG_NIOS_CPU_TIMER0_IRQ	16		/*		IRQ	*/
-#define	CFG_NIOS_CPU_TIMER0_PER	1000		/*  periode	usec	*/
-#define	CFG_NIOS_CPU_TIMER0_AR	0		/*  always run:	no(0)	*/
+#define	CONFIG_SYS_NIOS_CPU_TIMER0	0x00920940	/* TIMER0	addr	*/
+#define	CONFIG_SYS_NIOS_CPU_TIMER0_IRQ	16		/*		IRQ	*/
+#define	CONFIG_SYS_NIOS_CPU_TIMER0_PER	1000		/*  periode	usec	*/
+#define	CONFIG_SYS_NIOS_CPU_TIMER0_AR	0		/*  always run:	no(0)	*/
 						/*		yes(1)	*/
-#define	CFG_NIOS_CPU_TIMER0_FP	0		/*  fixed per:	no(0)	*/
+#define	CONFIG_SYS_NIOS_CPU_TIMER0_FP	0		/*  fixed per:	no(0)	*/
 						/*		yes(1)	*/
-#define	CFG_NIOS_CPU_TIMER0_SS	1		/*  snaphot:	no(0)	*/
+#define	CONFIG_SYS_NIOS_CPU_TIMER0_SS	1		/*  snaphot:	no(0)	*/
 						/*		yes(1)	*/
 
-#define	CFG_NIOS_CPU_TIMER1	0x009209e0	/* TIMER1	addr	*/
-#define	CFG_NIOS_CPU_TIMER1_IRQ	50		/*		IRQ	*/
-#define	CFG_NIOS_CPU_TIMER1_PER	10000		/*  periode	usec	*/
-#define	CFG_NIOS_CPU_TIMER1_AR	1		/*  always run:	no(0)	*/
+#define	CONFIG_SYS_NIOS_CPU_TIMER1	0x009209e0	/* TIMER1	addr	*/
+#define	CONFIG_SYS_NIOS_CPU_TIMER1_IRQ	50		/*		IRQ	*/
+#define	CONFIG_SYS_NIOS_CPU_TIMER1_PER	10000		/*  periode	usec	*/
+#define	CONFIG_SYS_NIOS_CPU_TIMER1_AR	1		/*  always run:	no(0)	*/
 						/*		yes(1)	*/
-#define	CFG_NIOS_CPU_TIMER1_FP	1		/*  fixed per:	no(0)	*/
+#define	CONFIG_SYS_NIOS_CPU_TIMER1_FP	1		/*  fixed per:	no(0)	*/
 						/*		yes(1)	*/
-#define	CFG_NIOS_CPU_TIMER1_SS	0		/*  snaphot:	no(0)	*/
+#define	CONFIG_SYS_NIOS_CPU_TIMER1_SS	0		/*  snaphot:	no(0)	*/
 						/*		yes(1)	*/
 
 /* serial i/o */
-#define	CFG_NIOS_CPU_UART_NUMS	1		/* number of uarts	*/
+#define	CONFIG_SYS_NIOS_CPU_UART_NUMS	1		/* number of uarts	*/
 
-#define	CFG_NIOS_CPU_UART0	0x00920900	/* UART0	addr	*/
-#define	CFG_NIOS_CPU_UART0_IRQ	25		/*		IRQ	*/
-#define	CFG_NIOS_CPU_UART0_BR	115200		/*  baudrate	var(0)	*/
-#define	CFG_NIOS_CPU_UART0_DB	8		/*  data bit		*/
-#define	CFG_NIOS_CPU_UART0_SB	1		/*  stop bit		*/
-#define	CFG_NIOS_CPU_UART0_PA	0		/*  parity	none(0)	*/
+#define	CONFIG_SYS_NIOS_CPU_UART0	0x00920900	/* UART0	addr	*/
+#define	CONFIG_SYS_NIOS_CPU_UART0_IRQ	25		/*		IRQ	*/
+#define	CONFIG_SYS_NIOS_CPU_UART0_BR	115200		/*  baudrate	var(0)	*/
+#define	CONFIG_SYS_NIOS_CPU_UART0_DB	8		/*  data bit		*/
+#define	CONFIG_SYS_NIOS_CPU_UART0_SB	1		/*  stop bit		*/
+#define	CONFIG_SYS_NIOS_CPU_UART0_PA	0		/*  parity	none(0)	*/
 						/*		odd(1)	*/
 						/*		even(2)	*/
-#define	CFG_NIOS_CPU_UART0_HS	0		/*  handshake:	no(0)	*/
+#define	CONFIG_SYS_NIOS_CPU_UART0_HS	0		/*  handshake:	no(0)	*/
 						/*		crts(1)	*/
-#define	CFG_NIOS_CPU_UART0_EOP	0		/*  eop reg:	no(0)	*/
+#define	CONFIG_SYS_NIOS_CPU_UART0_EOP	0		/*  eop reg:	no(0)	*/
 						/*		yes(1)	*/
 
 /* parallel i/o */
-#define	CFG_NIOS_CPU_PIO_NUMS	8		/* number of parports	*/
+#define	CONFIG_SYS_NIOS_CPU_PIO_NUMS	8		/* number of parports	*/
 
-#define	CFG_NIOS_CPU_PIO0	0x00920960	/* PIO0		addr	*/
-#define	CFG_NIOS_CPU_PIO0_IRQ	40		/*		IRQ	*/
-#define	CFG_NIOS_CPU_PIO0_BITS	4		/*  number  of  bits	*/
-#define	CFG_NIOS_CPU_PIO0_TYPE	2		/*  io type:	tris(0)	*/
+#define	CONFIG_SYS_NIOS_CPU_PIO0	0x00920960	/* PIO0		addr	*/
+#define	CONFIG_SYS_NIOS_CPU_PIO0_IRQ	40		/*		IRQ	*/
+#define	CONFIG_SYS_NIOS_CPU_PIO0_BITS	4		/*  number  of  bits	*/
+#define	CONFIG_SYS_NIOS_CPU_PIO0_TYPE	2		/*  io type:	tris(0)	*/
 						/*		out(1)	*/
 						/*		in(2)	*/
-#define	CFG_NIOS_CPU_PIO0_CAP	1		/*  capture:	no(0)	*/
+#define	CONFIG_SYS_NIOS_CPU_PIO0_CAP	1		/*  capture:	no(0)	*/
 						/*		yes(1)	*/
-#define	CFG_NIOS_CPU_PIO0_EDGE	3		/*  edge type:	none(0)	*/
+#define	CONFIG_SYS_NIOS_CPU_PIO0_EDGE	3		/*  edge type:	none(0)	*/
 						/*		fall(1)	*/
 						/*		rise(2)	*/
 						/*		any(3)	*/
-#define	CFG_NIOS_CPU_PIO0_ITYPE	2		/*  IRQ type:	none(0)	*/
+#define	CONFIG_SYS_NIOS_CPU_PIO0_ITYPE	2		/*  IRQ type:	none(0)	*/
 						/*		level(1)*/
 						/*		edge(2)	*/
 
-#define	CFG_NIOS_CPU_PIO1	0x00920970	/* PIO1		addr	*/
-#undef	CFG_NIOS_CPU_PIO1_IRQ			/*		w/o IRQ	*/
-#define	CFG_NIOS_CPU_PIO1_BITS	11		/*  number  of  bits	*/
-#define	CFG_NIOS_CPU_PIO1_TYPE	0		/*  io type:	tris(0)	*/
+#define	CONFIG_SYS_NIOS_CPU_PIO1	0x00920970	/* PIO1		addr	*/
+#undef	CONFIG_SYS_NIOS_CPU_PIO1_IRQ			/*		w/o IRQ	*/
+#define	CONFIG_SYS_NIOS_CPU_PIO1_BITS	11		/*  number  of  bits	*/
+#define	CONFIG_SYS_NIOS_CPU_PIO1_TYPE	0		/*  io type:	tris(0)	*/
 						/*		out(1)	*/
 						/*		in(2)	*/
-#define	CFG_NIOS_CPU_PIO1_CAP	0		/*  capture:	no(0)	*/
+#define	CONFIG_SYS_NIOS_CPU_PIO1_CAP	0		/*  capture:	no(0)	*/
 						/*		yes(1)	*/
-#define	CFG_NIOS_CPU_PIO1_EDGE	0		/*  edge type:	none(0)	*/
+#define	CONFIG_SYS_NIOS_CPU_PIO1_EDGE	0		/*  edge type:	none(0)	*/
 						/*		fall(1)	*/
 						/*		rise(2)	*/
 						/*		any(3)	*/
-#define	CFG_NIOS_CPU_PIO1_ITYPE	0		/*  IRQ type:	none(0)	*/
+#define	CONFIG_SYS_NIOS_CPU_PIO1_ITYPE	0		/*  IRQ type:	none(0)	*/
 						/*		level(1)*/
 						/*		edge(2)	*/
 
-#define	CFG_NIOS_CPU_PIO2	0x00920980	/* PIO2		addr	*/
-#undef	CFG_NIOS_CPU_PIO2_IRQ			/*		w/o IRQ	*/
-#define	CFG_NIOS_CPU_PIO2_BITS	8		/*  number  of  bits	*/
-#define	CFG_NIOS_CPU_PIO2_TYPE	1		/*  io type:	tris(0)	*/
+#define	CONFIG_SYS_NIOS_CPU_PIO2	0x00920980	/* PIO2		addr	*/
+#undef	CONFIG_SYS_NIOS_CPU_PIO2_IRQ			/*		w/o IRQ	*/
+#define	CONFIG_SYS_NIOS_CPU_PIO2_BITS	8		/*  number  of  bits	*/
+#define	CONFIG_SYS_NIOS_CPU_PIO2_TYPE	1		/*  io type:	tris(0)	*/
 						/*		out(1)	*/
 						/*		in(2)	*/
-#define	CFG_NIOS_CPU_PIO2_CAP	0		/*  capture:	no(0)	*/
+#define	CONFIG_SYS_NIOS_CPU_PIO2_CAP	0		/*  capture:	no(0)	*/
 						/*		yes(1)	*/
-#define	CFG_NIOS_CPU_PIO2_EDGE	0		/*  edge type:	none(0)	*/
+#define	CONFIG_SYS_NIOS_CPU_PIO2_EDGE	0		/*  edge type:	none(0)	*/
 						/*		fall(1)	*/
 						/*		rise(2)	*/
 						/*		any(3)	*/
-#define	CFG_NIOS_CPU_PIO2_ITYPE	0		/*  IRQ type:	none(0)	*/
+#define	CONFIG_SYS_NIOS_CPU_PIO2_ITYPE	0		/*  IRQ type:	none(0)	*/
 						/*		level(1)*/
 						/*		edge(2)	*/
 
-#define	CFG_NIOS_CPU_PIO3	0x00920990	/* PIO3		addr	*/
-#undef	CFG_NIOS_CPU_PIO3_IRQ			/*		w/o IRQ	*/
-#define	CFG_NIOS_CPU_PIO3_BITS	16		/*  number  of  bits	*/
-#define	CFG_NIOS_CPU_PIO3_TYPE	1		/*  io type:	tris(0)	*/
+#define	CONFIG_SYS_NIOS_CPU_PIO3	0x00920990	/* PIO3		addr	*/
+#undef	CONFIG_SYS_NIOS_CPU_PIO3_IRQ			/*		w/o IRQ	*/
+#define	CONFIG_SYS_NIOS_CPU_PIO3_BITS	16		/*  number  of  bits	*/
+#define	CONFIG_SYS_NIOS_CPU_PIO3_TYPE	1		/*  io type:	tris(0)	*/
 						/*		out(1)	*/
 						/*		in(2)	*/
-#define	CFG_NIOS_CPU_PIO3_CAP	0		/*  capture:	no(0)	*/
+#define	CONFIG_SYS_NIOS_CPU_PIO3_CAP	0		/*  capture:	no(0)	*/
 						/*		yes(1)	*/
-#define	CFG_NIOS_CPU_PIO3_EDGE	0		/*  edge type:	none(0)	*/
+#define	CONFIG_SYS_NIOS_CPU_PIO3_EDGE	0		/*  edge type:	none(0)	*/
 						/*		fall(1)	*/
 						/*		rise(2)	*/
 						/*		any(3)	*/
-#define	CFG_NIOS_CPU_PIO3_ITYPE	0		/*  IRQ type:	none(0)	*/
+#define	CONFIG_SYS_NIOS_CPU_PIO3_ITYPE	0		/*  IRQ type:	none(0)	*/
 						/*		level(1)*/
 						/*		edge(2)	*/
 
-#define	CFG_NIOS_CPU_PIO4	0x009209a0	/* PIO4		addr	*/
-#undef	CFG_NIOS_CPU_PIO4_IRQ			/*		w/o IRQ	*/
-#define	CFG_NIOS_CPU_PIO4_BITS	1		/*  number  of  bits	*/
-#define	CFG_NIOS_CPU_PIO4_TYPE	0		/*  io type:	tris(0)	*/
+#define	CONFIG_SYS_NIOS_CPU_PIO4	0x009209a0	/* PIO4		addr	*/
+#undef	CONFIG_SYS_NIOS_CPU_PIO4_IRQ			/*		w/o IRQ	*/
+#define	CONFIG_SYS_NIOS_CPU_PIO4_BITS	1		/*  number  of  bits	*/
+#define	CONFIG_SYS_NIOS_CPU_PIO4_TYPE	0		/*  io type:	tris(0)	*/
 						/*		out(1)	*/
 						/*		in(2)	*/
-#define	CFG_NIOS_CPU_PIO4_CAP	0		/*  capture:	no(0)	*/
+#define	CONFIG_SYS_NIOS_CPU_PIO4_CAP	0		/*  capture:	no(0)	*/
 						/*		yes(1)	*/
-#define	CFG_NIOS_CPU_PIO4_EDGE	0		/*  edge type:	none(0)	*/
+#define	CONFIG_SYS_NIOS_CPU_PIO4_EDGE	0		/*  edge type:	none(0)	*/
 						/*		fall(1)	*/
 						/*		rise(2)	*/
 						/*		any(3)	*/
-#define	CFG_NIOS_CPU_PIO4_ITYPE	0		/*  IRQ type:	none(0)	*/
+#define	CONFIG_SYS_NIOS_CPU_PIO4_ITYPE	0		/*  IRQ type:	none(0)	*/
 						/*		level(1)*/
 						/*		edge(2)	*/
 
-#define	CFG_NIOS_CPU_PIO5	0x009209b0	/* PIO5		addr	*/
-#define	CFG_NIOS_CPU_PIO5_IRQ	35		/*		IRQ	*/
-#define	CFG_NIOS_CPU_PIO5_BITS	1		/*  number  of  bits	*/
-#define	CFG_NIOS_CPU_PIO5_TYPE	2		/*  io type:	tris(0)	*/
+#define	CONFIG_SYS_NIOS_CPU_PIO5	0x009209b0	/* PIO5		addr	*/
+#define	CONFIG_SYS_NIOS_CPU_PIO5_IRQ	35		/*		IRQ	*/
+#define	CONFIG_SYS_NIOS_CPU_PIO5_BITS	1		/*  number  of  bits	*/
+#define	CONFIG_SYS_NIOS_CPU_PIO5_TYPE	2		/*  io type:	tris(0)	*/
 						/*		out(1)	*/
 						/*		in(2)	*/
-#define	CFG_NIOS_CPU_PIO5_CAP	1		/*  capture:	no(0)	*/
+#define	CONFIG_SYS_NIOS_CPU_PIO5_CAP	1		/*  capture:	no(0)	*/
 						/*		yes(1)	*/
-#define	CFG_NIOS_CPU_PIO5_EDGE	3		/*  edge type:	none(0)	*/
+#define	CONFIG_SYS_NIOS_CPU_PIO5_EDGE	3		/*  edge type:	none(0)	*/
 						/*		fall(1)	*/
 						/*		rise(2)	*/
 						/*		any(3)	*/
-#define	CFG_NIOS_CPU_PIO5_ITYPE	2		/*  IRQ type:	none(0)	*/
+#define	CONFIG_SYS_NIOS_CPU_PIO5_ITYPE	2		/*  IRQ type:	none(0)	*/
 						/*		level(1)*/
 						/*		edge(2)	*/
 
-#define	CFG_NIOS_CPU_PIO6	0x009209c0	/* PIO6		addr	*/
-#undef	CFG_NIOS_CPU_PIO6_IRQ			/*		w/o IRQ	*/
-#define	CFG_NIOS_CPU_PIO6_BITS	1		/*  number  of  bits	*/
-#define	CFG_NIOS_CPU_PIO6_TYPE	1		/*  io type:	tris(0)	*/
+#define	CONFIG_SYS_NIOS_CPU_PIO6	0x009209c0	/* PIO6		addr	*/
+#undef	CONFIG_SYS_NIOS_CPU_PIO6_IRQ			/*		w/o IRQ	*/
+#define	CONFIG_SYS_NIOS_CPU_PIO6_BITS	1		/*  number  of  bits	*/
+#define	CONFIG_SYS_NIOS_CPU_PIO6_TYPE	1		/*  io type:	tris(0)	*/
 						/*		out(1)	*/
 						/*		in(2)	*/
-#define	CFG_NIOS_CPU_PIO6_CAP	0		/*  capture:	no(0)	*/
+#define	CONFIG_SYS_NIOS_CPU_PIO6_CAP	0		/*  capture:	no(0)	*/
 						/*		yes(1)	*/
-#define	CFG_NIOS_CPU_PIO6_EDGE	0		/*  edge type:	none(0)	*/
+#define	CONFIG_SYS_NIOS_CPU_PIO6_EDGE	0		/*  edge type:	none(0)	*/
 						/*		fall(1)	*/
 						/*		rise(2)	*/
 						/*		any(3)	*/
-#define	CFG_NIOS_CPU_PIO6_ITYPE	0		/*  IRQ type:	none(0)	*/
+#define	CONFIG_SYS_NIOS_CPU_PIO6_ITYPE	0		/*  IRQ type:	none(0)	*/
 						/*		level(1)*/
 						/*		edge(2)	*/
 
-#define	CFG_NIOS_CPU_PIO7	0x009209d0	/* PIO7		addr	*/
-#undef	CFG_NIOS_CPU_PIO7_IRQ			/*		w/o IRQ	*/
-#define	CFG_NIOS_CPU_PIO7_BITS	1		/*  number  of  bits	*/
-#define	CFG_NIOS_CPU_PIO7_TYPE	1		/*  io type:	tris(0)	*/
+#define	CONFIG_SYS_NIOS_CPU_PIO7	0x009209d0	/* PIO7		addr	*/
+#undef	CONFIG_SYS_NIOS_CPU_PIO7_IRQ			/*		w/o IRQ	*/
+#define	CONFIG_SYS_NIOS_CPU_PIO7_BITS	1		/*  number  of  bits	*/
+#define	CONFIG_SYS_NIOS_CPU_PIO7_TYPE	1		/*  io type:	tris(0)	*/
 						/*		out(1)	*/
 						/*		in(2)	*/
-#define	CFG_NIOS_CPU_PIO7_CAP	0		/*  capture:	no(0)	*/
+#define	CONFIG_SYS_NIOS_CPU_PIO7_CAP	0		/*  capture:	no(0)	*/
 						/*		yes(1)	*/
-#define	CFG_NIOS_CPU_PIO7_EDGE	0		/*  edge type:	none(0)	*/
+#define	CONFIG_SYS_NIOS_CPU_PIO7_EDGE	0		/*  edge type:	none(0)	*/
 						/*		fall(1)	*/
 						/*		rise(2)	*/
 						/*		any(3)	*/
-#define	CFG_NIOS_CPU_PIO7_ITYPE	0		/*  IRQ type:	none(0)	*/
+#define	CONFIG_SYS_NIOS_CPU_PIO7_ITYPE	0		/*  IRQ type:	none(0)	*/
 						/*		level(1)*/
 						/*		edge(2)	*/
 
 /* IDE i/f */
-#define	CFG_NIOS_CPU_IDE_NUMS	1		/* number of IDE contr.	*/
-#define	CFG_NIOS_CPU_IDE0	0x00920a00	/* IDE0		addr	*/
+#define	CONFIG_SYS_NIOS_CPU_IDE_NUMS	1		/* number of IDE contr.	*/
+#define	CONFIG_SYS_NIOS_CPU_IDE0	0x00920a00	/* IDE0		addr	*/
 
 /* active serial memory i/f */
-#define	CFG_NIOS_CPU_ASMI_NUMS	1		/* number of ASMI	*/
-#define	CFG_NIOS_CPU_ASMI0	0x00920b00	/* ASMI0	addr	*/
-#define	CFG_NIOS_CPU_ASMI0_IRQ	45		/*		IRQ	*/
+#define	CONFIG_SYS_NIOS_CPU_ASMI_NUMS	1		/* number of ASMI	*/
+#define	CONFIG_SYS_NIOS_CPU_ASMI0	0x00920b00	/* ASMI0	addr	*/
+#define	CONFIG_SYS_NIOS_CPU_ASMI0_IRQ	45		/*		IRQ	*/
 
 /* memory accessibility */
-#define	CFG_NIOS_CPU_SRAM_BASE	0x00800000	/* board SRAM	addr	*/
-#define	CFG_NIOS_CPU_SRAM_SIZE	(1024 * 1024)	/*  1 MB	size	*/
+#define	CONFIG_SYS_NIOS_CPU_SRAM_BASE	0x00800000	/* board SRAM	addr	*/
+#define	CONFIG_SYS_NIOS_CPU_SRAM_SIZE	(1024 * 1024)	/*  1 MB	size	*/
 
-#define	CFG_NIOS_CPU_SDRAM_BASE	0x01000000	/* board SDRAM	addr	*/
-#define	CFG_NIOS_CPU_SDRAM_SIZE	(16*1024*1024)	/* 16 MB	size	*/
+#define	CONFIG_SYS_NIOS_CPU_SDRAM_BASE	0x01000000	/* board SDRAM	addr	*/
+#define	CONFIG_SYS_NIOS_CPU_SDRAM_SIZE	(16*1024*1024)	/* 16 MB	size	*/
 
-#define	CFG_NIOS_CPU_FLASH_BASE	0x00000000	/* board Flash	addr	*/
-#define	CFG_NIOS_CPU_FLASH_SIZE	(8*1024*1024)	/*  8 MB	size	*/
+#define	CONFIG_SYS_NIOS_CPU_FLASH_BASE	0x00000000	/* board Flash	addr	*/
+#define	CONFIG_SYS_NIOS_CPU_FLASH_SIZE	(8*1024*1024)	/*  8 MB	size	*/
 
 /* LAN */
-#define	CFG_NIOS_CPU_LAN_NUMS	1		/* number of LAN i/f	*/
+#define	CONFIG_SYS_NIOS_CPU_LAN_NUMS	1		/* number of LAN i/f	*/
 
-#define	CFG_NIOS_CPU_LAN0_BASE	0x00910000	/* LAN0		addr	*/
-#define	CFG_NIOS_CPU_LAN0_OFFS	0x0300		/*		offset	*/
-#define	CFG_NIOS_CPU_LAN0_IRQ	30		/*		IRQ	*/
-#define	CFG_NIOS_CPU_LAN0_BUSW	32		/*	        buswidth*/
-#define	CFG_NIOS_CPU_LAN0_TYPE	0		/*	smc91111(0)	*/
+#define	CONFIG_SYS_NIOS_CPU_LAN0_BASE	0x00910000	/* LAN0		addr	*/
+#define	CONFIG_SYS_NIOS_CPU_LAN0_OFFS	0x0300		/*		offset	*/
+#define	CONFIG_SYS_NIOS_CPU_LAN0_IRQ	30		/*		IRQ	*/
+#define	CONFIG_SYS_NIOS_CPU_LAN0_BUSW	32		/*	        buswidth*/
+#define	CONFIG_SYS_NIOS_CPU_LAN0_TYPE	0		/*	smc91111(0)	*/
 						/*	cs8900(1)	*/
 						/* ex:	alteramac(2)	*/
 
 /* symbolic redefinition (undef, if not present) */
-#define	CFG_NIOS_CPU_USER_TIMER		0	/* TIMER0: users choice	*/
-#define	CFG_NIOS_CPU_TICK_TIMER		1	/* TIMER1: tick (needed)*/
+#define	CONFIG_SYS_NIOS_CPU_USER_TIMER		0	/* TIMER0: users choice	*/
+#define	CONFIG_SYS_NIOS_CPU_TICK_TIMER		1	/* TIMER1: tick (needed)*/
 
-#define	CFG_NIOS_CPU_BUTTON_PIO		0	/* PIO0: buttons	*/
-#define	CFG_NIOS_CPU_LCD_PIO		1	/* PIO1: ASCII LCD	*/
-#define	CFG_NIOS_CPU_LED_PIO		2	/* PIO2: LED bar	*/
-#define	CFG_NIOS_CPU_SEVENSEG_PIO	3	/* PIO3: 7-seg. display	*/
-#define	CFG_NIOS_CPU_RECONF_PIO		4	/* PIO4: reconf pin	*/
-#define	CFG_NIOS_CPU_CFPRESENT_PIO	5	/* PIO5: CF present IRQ	*/
-#define	CFG_NIOS_CPU_CFPOWER_PIO	6	/* PIO6: CF power/sw.	*/
-#define	CFG_NIOS_CPU_CFATASEL_PIO	7	/* PIO7: CF ATA select	*/
+#define	CONFIG_SYS_NIOS_CPU_BUTTON_PIO		0	/* PIO0: buttons	*/
+#define	CONFIG_SYS_NIOS_CPU_LCD_PIO		1	/* PIO1: ASCII LCD	*/
+#define	CONFIG_SYS_NIOS_CPU_LED_PIO		2	/* PIO2: LED bar	*/
+#define	CONFIG_SYS_NIOS_CPU_SEVENSEG_PIO	3	/* PIO3: 7-seg. display	*/
+#define	CONFIG_SYS_NIOS_CPU_RECONF_PIO		4	/* PIO4: reconf pin	*/
+#define	CONFIG_SYS_NIOS_CPU_CFPRESENT_PIO	5	/* PIO5: CF present IRQ	*/
+#define	CONFIG_SYS_NIOS_CPU_CFPOWER_PIO	6	/* PIO6: CF power/sw.	*/
+#define	CONFIG_SYS_NIOS_CPU_CFATASEL_PIO	7	/* PIO7: CF ATA select	*/
 
 #endif	/* __CONFIG_DK1C20_STANDARD_32_H */
diff --git a/include/configs/DK1S10.h b/include/configs/DK1S10.h
index 7a9ef79ad..1d031f1cd 100644
--- a/include/configs/DK1S10.h
+++ b/include/configs/DK1S10.h
@@ -38,7 +38,7 @@
 #elif	defined(CONFIG_NIOS_MTX_LDK_20)
 #include <configs/DK1S10_mtx_ldk_20.h>
 #else
-#error *** CFG_ERROR: you have to setup right NIOS CPU configuration
+#error *** CONFIG_SYS_ERROR: you have to setup right NIOS CPU configuration
 #endif
 
 /*------------------------------------------------------------------------
@@ -46,36 +46,36 @@
  *----------------------------------------------------------------------*/
 #define CONFIG_NIOS		1		/* NIOS-32 core		*/
 #define	CONFIG_DK1S10		1		/* Stratix DK-1S10 board*/
-#define CONFIG_SYS_CLK_FREQ	CFG_NIOS_CPU_CLK/* 50 MHz core clock	*/
-#define	CFG_HZ			1000		/* 1 msec time tick	*/
-#undef  CFG_CLKS_IN_HZ
+#define CONFIG_SYS_CLK_FREQ	CONFIG_SYS_NIOS_CPU_CLK/* 50 MHz core clock	*/
+#define	CONFIG_SYS_HZ			1000		/* 1 msec time tick	*/
+#undef  CONFIG_SYS_CLKS_IN_HZ
 #define	CONFIG_BOARD_EARLY_INIT_F 1	/* enable early board-spec. init*/
 
 /*------------------------------------------------------------------------
  * BASE ADDRESSES / SIZE (Flash, SRAM, SDRAM)
  *----------------------------------------------------------------------*/
-#if	(CFG_NIOS_CPU_SDRAM_SIZE != 0)
+#if	(CONFIG_SYS_NIOS_CPU_SDRAM_SIZE != 0)
 
-#define CFG_SDRAM_BASE		CFG_NIOS_CPU_SDRAM_BASE
-#define CFG_SDRAM_SIZE		CFG_NIOS_CPU_SDRAM_SIZE
+#define CONFIG_SYS_SDRAM_BASE		CONFIG_SYS_NIOS_CPU_SDRAM_BASE
+#define CONFIG_SYS_SDRAM_SIZE		CONFIG_SYS_NIOS_CPU_SDRAM_SIZE
 
 #else
-#error *** CFG_ERROR: you have to setup any SDRAM in NIOS CPU config
+#error *** CONFIG_SYS_ERROR: you have to setup any SDRAM in NIOS CPU config
 #endif
 
-#if	defined(CFG_NIOS_CPU_SRAM_BASE) && defined(CFG_NIOS_CPU_SRAM_SIZE)
+#if	defined(CONFIG_SYS_NIOS_CPU_SRAM_BASE) && defined(CONFIG_SYS_NIOS_CPU_SRAM_SIZE)
 
-#define	CFG_SRAM_BASE		CFG_NIOS_CPU_SRAM_BASE
-#define	CFG_SRAM_SIZE		CFG_NIOS_CPU_SRAM_SIZE
+#define	CONFIG_SYS_SRAM_BASE		CONFIG_SYS_NIOS_CPU_SRAM_BASE
+#define	CONFIG_SYS_SRAM_SIZE		CONFIG_SYS_NIOS_CPU_SRAM_SIZE
 
 #else
 
-#undef	CFG_SRAM_BASE
-#undef	CFG_SRAM_SIZE
+#undef	CONFIG_SYS_SRAM_BASE
+#undef	CONFIG_SYS_SRAM_SIZE
 
 #endif
 
-#define CFG_VECT_BASE		CFG_NIOS_CPU_VEC_BASE
+#define CONFIG_SYS_VECT_BASE		CONFIG_SYS_NIOS_CPU_VEC_BASE
 
 /*------------------------------------------------------------------------
  * MEMORY ORGANIZATION - For the most part, you can put things pretty
@@ -88,172 +88,172 @@
  *	-Global data is placed below the heap.
  *	-The stack is placed below global data (&grows down).
  *----------------------------------------------------------------------*/
-#define CFG_MONITOR_LEN		(256 * 1024)	/* Reserve 256k		*/
-#define CFG_GBL_DATA_SIZE	128		/* Global data size rsvd*/
-#define CFG_MALLOC_LEN		(CFG_ENV_SIZE + 128*1024)
+#define CONFIG_SYS_MONITOR_LEN		(256 * 1024)	/* Reserve 256k		*/
+#define CONFIG_SYS_GBL_DATA_SIZE	128		/* Global data size rsvd*/
+#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + 128*1024)
 
-#define CFG_MONITOR_BASE	TEXT_BASE
-#define CFG_MALLOC_BASE		(CFG_MONITOR_BASE - CFG_MALLOC_LEN)
-#define CFG_GBL_DATA_OFFSET	(CFG_MALLOC_BASE - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP		CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_MONITOR_BASE	TEXT_BASE
+#define CONFIG_SYS_MALLOC_BASE		(CONFIG_SYS_MONITOR_BASE - CONFIG_SYS_MALLOC_LEN)
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_MALLOC_BASE - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP		CONFIG_SYS_GBL_DATA_OFFSET
 
 /*------------------------------------------------------------------------
  * FLASH (AM29LV065D)
  *----------------------------------------------------------------------*/
-#if	(CFG_NIOS_CPU_FLASH_SIZE != 0)
+#if	(CONFIG_SYS_NIOS_CPU_FLASH_SIZE != 0)
 
-#define CFG_FLASH_BASE		CFG_NIOS_CPU_FLASH_BASE
-#define CFG_FLASH_SIZE		CFG_NIOS_CPU_FLASH_SIZE
-#define CFG_MAX_FLASH_SECT	128		/* Max # sects per bank */
-#define CFG_MAX_FLASH_BANKS	1		/* Max # of flash banks */
-#define CFG_FLASH_ERASE_TOUT	8000		/* Erase timeout (msec) */
-#define CFG_FLASH_WRITE_TOUT	100		/* Write timeout (msec) */
-#define CFG_FLASH_WORD_SIZE	unsigned char	/* flash word size	*/
+#define CONFIG_SYS_FLASH_BASE		CONFIG_SYS_NIOS_CPU_FLASH_BASE
+#define CONFIG_SYS_FLASH_SIZE		CONFIG_SYS_NIOS_CPU_FLASH_SIZE
+#define CONFIG_SYS_MAX_FLASH_SECT	128		/* Max # sects per bank */
+#define CONFIG_SYS_MAX_FLASH_BANKS	1		/* Max # of flash banks */
+#define CONFIG_SYS_FLASH_ERASE_TOUT	8000		/* Erase timeout (msec) */
+#define CONFIG_SYS_FLASH_WRITE_TOUT	100		/* Write timeout (msec) */
+#define CONFIG_SYS_FLASH_WORD_SIZE	unsigned char	/* flash word size	*/
 
 #else
-#error *** CFG_ERROR: you have to setup any Flash memory in NIOS CPU config
+#error *** CONFIG_SYS_ERROR: you have to setup any Flash memory in NIOS CPU config
 #endif
 
 /*------------------------------------------------------------------------
  * ENVIRONMENT
  *----------------------------------------------------------------------*/
-#if	(CFG_NIOS_CPU_FLASH_SIZE != 0)
+#if	(CONFIG_SYS_NIOS_CPU_FLASH_SIZE != 0)
 
-#define	CFG_ENV_IS_IN_FLASH	1		/* Environment in flash */
+#define	CONFIG_ENV_IS_IN_FLASH	1		/* Environment in flash */
 
 #if	defined(CONFIG_NIOS_STANDARD_32)
-#define CFG_ENV_ADDR		CFG_FLASH_BASE	/* Mem addr of env	*/
+#define CONFIG_ENV_ADDR		CONFIG_SYS_FLASH_BASE	/* Mem addr of env	*/
 #elif	defined(CONFIG_NIOS_MTX_LDK_20)
-#define CFG_ENV_ADDR		(CFG_FLASH_BASE + CFG_MONITOR_LEN)
+#define CONFIG_ENV_ADDR		(CONFIG_SYS_FLASH_BASE + CONFIG_SYS_MONITOR_LEN)
 #else
-#error *** CFG_ERROR: you have to setup the environment base address CFG_ENV_ADDR
+#error *** CONFIG_SYS_ERROR: you have to setup the environment base address CONFIG_ENV_ADDR
 #endif
 
-#define CFG_ENV_SIZE		(64 * 1024)	/* 64 KByte (1 sector)	*/
+#define CONFIG_ENV_SIZE		(64 * 1024)	/* 64 KByte (1 sector)	*/
 #define CONFIG_ENV_OVERWRITE			/* Serial/eth change Ok */
 
 #else
-#define	CFG_ENV_IS_NOWHERE	1		/* NO Environment	*/
+#define	CONFIG_ENV_IS_NOWHERE	1		/* NO Environment	*/
 #endif
 
 /*------------------------------------------------------------------------
  * CONSOLE
  *----------------------------------------------------------------------*/
-#if	(CFG_NIOS_CPU_UART_NUMS != 0)
+#if	(CONFIG_SYS_NIOS_CPU_UART_NUMS != 0)
 
-#define CFG_NIOS_CONSOLE	CFG_NIOS_CPU_UART0 /* 1st UART is Cons. */
+#define CONFIG_SYS_NIOS_CONSOLE	CONFIG_SYS_NIOS_CPU_UART0 /* 1st UART is Cons. */
 #define CONFIG_LOADS_ECHO	1	 /* echo on for serial download */
 
-#if	(CFG_NIOS_CPU_UART0_BR != 0)
-#define CFG_NIOS_FIXEDBAUD	1		   /* Baudrate is fixed	*/
-#define CONFIG_BAUDRATE		CFG_NIOS_CPU_UART0_BR
+#if	(CONFIG_SYS_NIOS_CPU_UART0_BR != 0)
+#define CONFIG_SYS_NIOS_FIXEDBAUD	1		   /* Baudrate is fixed	*/
+#define CONFIG_BAUDRATE		CONFIG_SYS_NIOS_CPU_UART0_BR
 #else
-#undef	CFG_NIOS_FIXEDBAUD
+#undef	CONFIG_SYS_NIOS_FIXEDBAUD
 #define CONFIG_BAUDRATE		115200
 #endif
 
-#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
 
 #else
-#error *** CFG_ERROR: you have to setup at least one UART in NIOS CPU config
+#error *** CONFIG_SYS_ERROR: you have to setup at least one UART in NIOS CPU config
 #endif
 
 /*------------------------------------------------------------------------
  * TIMER FOR TIMEBASE -- Nios doesn't have the equivalent of ppc  PIT,
  * so an avalon bus timer is required.
  *----------------------------------------------------------------------*/
-#if	(CFG_NIOS_CPU_TIMER_NUMS != 0) && defined(CFG_NIOS_CPU_TICK_TIMER)
+#if	(CONFIG_SYS_NIOS_CPU_TIMER_NUMS != 0) && defined(CONFIG_SYS_NIOS_CPU_TICK_TIMER)
 
-#if	(CFG_NIOS_CPU_TICK_TIMER == 0)
+#if	(CONFIG_SYS_NIOS_CPU_TICK_TIMER == 0)
 
-#define CFG_NIOS_TMRBASE	CFG_NIOS_CPU_TIMER0 /* TIMER0 as tick	*/
-#define CFG_NIOS_TMRIRQ		CFG_NIOS_CPU_TIMER0_IRQ
+#define CONFIG_SYS_NIOS_TMRBASE	CONFIG_SYS_NIOS_CPU_TIMER0 /* TIMER0 as tick	*/
+#define CONFIG_SYS_NIOS_TMRIRQ		CONFIG_SYS_NIOS_CPU_TIMER0_IRQ
 
-#if	(CFG_NIOS_CPU_TIMER0_FP == 1)		    /* fixed period */
+#if	(CONFIG_SYS_NIOS_CPU_TIMER0_FP == 1)		    /* fixed period */
 
-#if	(CFG_NIOS_CPU_TIMER0_PER >= CFG_HZ)
-#define CFG_NIOS_TMRMS		(CFG_NIOS_CPU_TIMER0_PER / CFG_HZ)
+#if	(CONFIG_SYS_NIOS_CPU_TIMER0_PER >= CONFIG_SYS_HZ)
+#define CONFIG_SYS_NIOS_TMRMS		(CONFIG_SYS_NIOS_CPU_TIMER0_PER / CONFIG_SYS_HZ)
 #else
-#error *** CFG_ERROR: you have to use a timer periode greater than CFG_HZ
+#error *** CONFIG_SYS_ERROR: you have to use a timer periode greater than CONFIG_SYS_HZ
 #endif
 
-#undef	CFG_NIOS_TMRCNT	/* no preloadable counter value */
+#undef	CONFIG_SYS_NIOS_TMRCNT	/* no preloadable counter value */
 
-#elif	(CFG_NIOS_CPU_TIMER0_FP == 0)		    /* variable period */
+#elif	(CONFIG_SYS_NIOS_CPU_TIMER0_FP == 0)		    /* variable period */
 
-#if	(CFG_HZ <= 1000)
-#define CFG_NIOS_TMRMS		(1000 / CFG_HZ)
+#if	(CONFIG_SYS_HZ <= 1000)
+#define CONFIG_SYS_NIOS_TMRMS		(1000 / CONFIG_SYS_HZ)
 #else
-#error *** CFG_ERROR: sorry, CFG_HZ have to be less than 1000
+#error *** CONFIG_SYS_ERROR: sorry, CONFIG_SYS_HZ have to be less than 1000
 #endif
 
-#define	CFG_NIOS_TMRCNT		(CONFIG_SYS_CLK_FREQ / CFG_HZ)
+#define	CONFIG_SYS_NIOS_TMRCNT		(CONFIG_SYS_CLK_FREQ / CONFIG_SYS_HZ)
 
 #else
-#error *** CFG_ERROR: you have to define CFG_NIOS_CPU_TIMER0_FP correct
+#error *** CONFIG_SYS_ERROR: you have to define CONFIG_SYS_NIOS_CPU_TIMER0_FP correct
 #endif
 
-#elif	(CFG_NIOS_CPU_TICK_TIMER == 1)
+#elif	(CONFIG_SYS_NIOS_CPU_TICK_TIMER == 1)
 
-#define CFG_NIOS_TMRBASE	CFG_NIOS_CPU_TIMER1 /* TIMER1 as tick	*/
-#define CFG_NIOS_TMRIRQ		CFG_NIOS_CPU_TIMER1_IRQ
+#define CONFIG_SYS_NIOS_TMRBASE	CONFIG_SYS_NIOS_CPU_TIMER1 /* TIMER1 as tick	*/
+#define CONFIG_SYS_NIOS_TMRIRQ		CONFIG_SYS_NIOS_CPU_TIMER1_IRQ
 
-#if	(CFG_NIOS_CPU_TIMER1_FP == 1)		    /* fixed period */
+#if	(CONFIG_SYS_NIOS_CPU_TIMER1_FP == 1)		    /* fixed period */
 
-#if	(CFG_NIOS_CPU_TIMER1_PER >= CFG_HZ)
-#define CFG_NIOS_TMRMS		(CFG_NIOS_CPU_TIMER1_PER / CFG_HZ)
+#if	(CONFIG_SYS_NIOS_CPU_TIMER1_PER >= CONFIG_SYS_HZ)
+#define CONFIG_SYS_NIOS_TMRMS		(CONFIG_SYS_NIOS_CPU_TIMER1_PER / CONFIG_SYS_HZ)
 #else
-#error *** CFG_ERROR: you have to use a timer periode greater than CFG_HZ
+#error *** CONFIG_SYS_ERROR: you have to use a timer periode greater than CONFIG_SYS_HZ
 #endif
 
-#undef	CFG_NIOS_TMRCNT	/* no preloadable counter value */
+#undef	CONFIG_SYS_NIOS_TMRCNT	/* no preloadable counter value */
 
-#elif	(CFG_NIOS_CPU_TIMER1_FP == 0)		    /* variable period */
+#elif	(CONFIG_SYS_NIOS_CPU_TIMER1_FP == 0)		    /* variable period */
 
-#if	(CFG_HZ <= 1000)
-#define CFG_NIOS_TMRMS		(1000 / CFG_HZ)
+#if	(CONFIG_SYS_HZ <= 1000)
+#define CONFIG_SYS_NIOS_TMRMS		(1000 / CONFIG_SYS_HZ)
 #else
-#error *** CFG_ERROR: sorry, CFG_HZ have to be less than 1000
+#error *** CONFIG_SYS_ERROR: sorry, CONFIG_SYS_HZ have to be less than 1000
 #endif
 
-#define	CFG_NIOS_TMRCNT		(CONFIG_SYS_CLK_FREQ / CFG_HZ)
+#define	CONFIG_SYS_NIOS_TMRCNT		(CONFIG_SYS_CLK_FREQ / CONFIG_SYS_HZ)
 
 #else
-#error *** CFG_ERROR: you have to define CFG_NIOS_CPU_TIMER1_FP correct
+#error *** CONFIG_SYS_ERROR: you have to define CONFIG_SYS_NIOS_CPU_TIMER1_FP correct
 #endif
 
-#endif	/* CFG_NIOS_CPU_TICK_TIMER */
+#endif	/* CONFIG_SYS_NIOS_CPU_TICK_TIMER */
 
 #else
-#error *** CFG_ERROR: you have to setup at least one TIMER in NIOS CPU config
+#error *** CONFIG_SYS_ERROR: you have to setup at least one TIMER in NIOS CPU config
 #endif
 
 /*------------------------------------------------------------------------
  * Ethernet -- needs work!
  *----------------------------------------------------------------------*/
-#if	(CFG_NIOS_CPU_LAN_NUMS == 1)
+#if	(CONFIG_SYS_NIOS_CPU_LAN_NUMS == 1)
 
-#if	(CFG_NIOS_CPU_LAN0_TYPE == 0)		/* LAN91C111		*/
+#if	(CONFIG_SYS_NIOS_CPU_LAN0_TYPE == 0)		/* LAN91C111		*/
 
 #define	CONFIG_DRIVER_SMC91111			/* Using SMC91c111	*/
 #undef	CONFIG_SMC91111_EXT_PHY			/* Internal PHY		*/
-#define	CONFIG_SMC91111_BASE	(CFG_NIOS_CPU_LAN0_BASE + CFG_NIOS_CPU_LAN0_OFFS)
+#define	CONFIG_SMC91111_BASE	(CONFIG_SYS_NIOS_CPU_LAN0_BASE + CONFIG_SYS_NIOS_CPU_LAN0_OFFS)
 
-#if	(CFG_NIOS_CPU_LAN0_BUSW == 32)
+#if	(CONFIG_SYS_NIOS_CPU_LAN0_BUSW == 32)
 #define	CONFIG_SMC_USE_32_BIT	1
 #else	/* no */
 #undef	CONFIG_SMC_USE_32_BIT
 #endif
 
-#elif	(CFG_NIOS_CPU_LAN0_TYPE == 1)		/* CS8900A		*/
+#elif	(CONFIG_SYS_NIOS_CPU_LAN0_TYPE == 1)		/* CS8900A		*/
 
 	/********************************************/
 	/* !!! CS8900 is __not__ tested on NIOS !!! */
 	/********************************************/
 #define	CONFIG_DRIVER_CS8900			/* Using CS8900		*/
-#define	CS8900_BASE		(CFG_NIOS_CPU_LAN0_BASE + CFG_NIOS_CPU_LAN0_OFFS)
+#define	CS8900_BASE		(CONFIG_SYS_NIOS_CPU_LAN0_BASE + CONFIG_SYS_NIOS_CPU_LAN0_OFFS)
 
-#if	(CFG_NIOS_CPU_LAN0_BUSW == 32)
+#if	(CONFIG_SYS_NIOS_CPU_LAN0_BUSW == 32)
 #undef	CS8900_BUS16
 #define	CS8900_BUS32		1
 #else	/* no */
@@ -262,7 +262,7 @@
 #endif
 
 #else
-#error *** CFG_ERROR: invalid LAN0 chip type, check your NIOS CPU config
+#error *** CONFIG_SYS_ERROR: invalid LAN0 chip type, check your NIOS CPU config
 #endif
 
 #define CONFIG_ETHADDR		08:00:3e:26:0a:5b
@@ -271,64 +271,64 @@
 #define CONFIG_SERVERIP		192.168.2.16
 
 #else
-#error *** CFG_ERROR: you have to setup just one LAN only or expand your config.h
+#error *** CONFIG_SYS_ERROR: you have to setup just one LAN only or expand your config.h
 #endif
 
 /*------------------------------------------------------------------------
  * STATUS LEDs
  *----------------------------------------------------------------------*/
-#if	(CFG_NIOS_CPU_PIO_NUMS != 0) && defined(CFG_NIOS_CPU_LED_PIO)
+#if	(CONFIG_SYS_NIOS_CPU_PIO_NUMS != 0) && defined(CONFIG_SYS_NIOS_CPU_LED_PIO)
 
-#if	(CFG_NIOS_CPU_LED_PIO == 0)
+#if	(CONFIG_SYS_NIOS_CPU_LED_PIO == 0)
 
-#error *** CFG_ERROR: status LEDs at PIO0 not supported, expand your config.h
+#error *** CONFIG_SYS_ERROR: status LEDs at PIO0 not supported, expand your config.h
 
-#elif	(CFG_NIOS_CPU_LED_PIO == 1)
+#elif	(CONFIG_SYS_NIOS_CPU_LED_PIO == 1)
 
-#error *** CFG_ERROR: status LEDs at PIO1 not supported, expand your config.h
+#error *** CONFIG_SYS_ERROR: status LEDs at PIO1 not supported, expand your config.h
 
-#elif	(CFG_NIOS_CPU_LED_PIO == 2)
+#elif	(CONFIG_SYS_NIOS_CPU_LED_PIO == 2)
 
-#define	STATUS_LED_BASE			CFG_NIOS_CPU_PIO2
-#define	STATUS_LED_BITS			CFG_NIOS_CPU_PIO2_BITS
+#define	STATUS_LED_BASE			CONFIG_SYS_NIOS_CPU_PIO2
+#define	STATUS_LED_BITS			CONFIG_SYS_NIOS_CPU_PIO2_BITS
 #define	STATUS_LED_ACTIVE		1 /* LED on for bit == 1 */
 
-#if	(CFG_NIOS_CPU_PIO2_TYPE == 1)
+#if	(CONFIG_SYS_NIOS_CPU_PIO2_TYPE == 1)
 #define	STATUS_LED_WRONLY		1
 #else
 #undef	STATUS_LED_WRONLY
 #endif
 
-#elif	(CFG_NIOS_CPU_LED_PIO == 3)
+#elif	(CONFIG_SYS_NIOS_CPU_LED_PIO == 3)
 
-#error *** CFG_ERROR: status LEDs at PIO3 not supported, expand your config.h
+#error *** CONFIG_SYS_ERROR: status LEDs at PIO3 not supported, expand your config.h
 
-#elif	(CFG_NIOS_CPU_LED_PIO == 4)
+#elif	(CONFIG_SYS_NIOS_CPU_LED_PIO == 4)
 
-#error *** CFG_ERROR: status LEDs at PIO4 not supported, expand your config.h
+#error *** CONFIG_SYS_ERROR: status LEDs at PIO4 not supported, expand your config.h
 
-#elif	(CFG_NIOS_CPU_LED_PIO == 5)
+#elif	(CONFIG_SYS_NIOS_CPU_LED_PIO == 5)
 
-#error *** CFG_ERROR: status LEDs at PIO5 not supported, expand your config.h
+#error *** CONFIG_SYS_ERROR: status LEDs at PIO5 not supported, expand your config.h
 
-#elif	(CFG_NIOS_CPU_LED_PIO == 6)
+#elif	(CONFIG_SYS_NIOS_CPU_LED_PIO == 6)
 
-#error *** CFG_ERROR: status LEDs at PIO6 not supported, expand your config.h
+#error *** CONFIG_SYS_ERROR: status LEDs at PIO6 not supported, expand your config.h
 
-#elif	(CFG_NIOS_CPU_LED_PIO == 7)
+#elif	(CONFIG_SYS_NIOS_CPU_LED_PIO == 7)
 
-#error *** CFG_ERROR: status LEDs at PIO7 not supported, expand your config.h
+#error *** CONFIG_SYS_ERROR: status LEDs at PIO7 not supported, expand your config.h
 
-#elif	(CFG_NIOS_CPU_LED_PIO == 8)
+#elif	(CONFIG_SYS_NIOS_CPU_LED_PIO == 8)
 
-#error *** CFG_ERROR: status LEDs at PIO8 not supported, expand your config.h
+#error *** CONFIG_SYS_ERROR: status LEDs at PIO8 not supported, expand your config.h
 
-#elif	(CFG_NIOS_CPU_LED_PIO == 9)
+#elif	(CONFIG_SYS_NIOS_CPU_LED_PIO == 9)
 
-#error *** CFG_ERROR: status LEDs at PIO9 not supported, expand your config.h
+#error *** CONFIG_SYS_ERROR: status LEDs at PIO9 not supported, expand your config.h
 
 #else
-#error *** CFG_ERROR: you have to set CFG_NIOS_CPU_LED_PIO in right case
+#error *** CONFIG_SYS_ERROR: you have to set CONFIG_SYS_NIOS_CPU_LED_PIO in right case
 #endif
 
 #define	CONFIG_STATUS_LED		1 /* enable status led driver */
@@ -336,89 +336,89 @@
 #define	STATUS_LED_BIT			(1 << 0)	/* LED[0] */
 #define	STATUS_LED_STATE		STATUS_LED_BLINKING
 #define	STATUS_LED_BOOT_STATE		STATUS_LED_OFF
-#define	STATUS_LED_PERIOD		(CFG_HZ / 10)	/* ca. 1 Hz */
+#define	STATUS_LED_PERIOD		(CONFIG_SYS_HZ / 10)	/* ca. 1 Hz */
 #define	STATUS_LED_BOOT			0		/* boot LED */
 
 #if	(STATUS_LED_BITS > 1)
 #define	STATUS_LED_BIT1			(1 << 1)	/* LED[1] */
 #define	STATUS_LED_STATE1		STATUS_LED_OFF
-#define	STATUS_LED_PERIOD1		(CFG_HZ / 50)	/* ca. 5 Hz */
+#define	STATUS_LED_PERIOD1		(CONFIG_SYS_HZ / 50)	/* ca. 5 Hz */
 #define	STATUS_LED_RED			1		/* fail LED */
 #endif
 
 #if	(STATUS_LED_BITS > 2)
 #define	STATUS_LED_BIT2			(1 << 2)	/* LED[2] */
 #define	STATUS_LED_STATE2		STATUS_LED_OFF
-#define	STATUS_LED_PERIOD2		(CFG_HZ / 10)	/* ca. 1 Hz */
+#define	STATUS_LED_PERIOD2		(CONFIG_SYS_HZ / 10)	/* ca. 1 Hz */
 #define	STATUS_LED_YELLOW		2		/* info LED */
 #endif
 
 #if	(STATUS_LED_BITS > 3)
 #define	STATUS_LED_BIT3			(1 << 3)	/* LED[3] */
 #define	STATUS_LED_STATE3		STATUS_LED_OFF
-#define	STATUS_LED_PERIOD3		(CFG_HZ / 10)	/* ca. 1 Hz */
+#define	STATUS_LED_PERIOD3		(CONFIG_SYS_HZ / 10)	/* ca. 1 Hz */
 #define	STATUS_LED_GREEN		3		/* info LED */
 #endif
 
 #define	STATUS_LED_PAR			1 /* makes status_led.h happy */
 
-#endif	/* CFG_NIOS_CPU_PIO_NUMS */
+#endif	/* CONFIG_SYS_NIOS_CPU_PIO_NUMS */
 
 /*------------------------------------------------------------------------
  * SEVEN SEGMENT LED DISPLAY
  *----------------------------------------------------------------------*/
-#if	(CFG_NIOS_CPU_PIO_NUMS != 0) && defined(CFG_NIOS_CPU_SEVENSEG_PIO)
+#if	(CONFIG_SYS_NIOS_CPU_PIO_NUMS != 0) && defined(CONFIG_SYS_NIOS_CPU_SEVENSEG_PIO)
 
-#if	(CFG_NIOS_CPU_SEVENSEG_PIO == 0)
+#if	(CONFIG_SYS_NIOS_CPU_SEVENSEG_PIO == 0)
 
-#error *** CFG_ERROR: seven segment display at PIO0 not supported, expand your config.h
+#error *** CONFIG_SYS_ERROR: seven segment display at PIO0 not supported, expand your config.h
 
-#elif	(CFG_NIOS_CPU_SEVENSEG_PIO == 1)
+#elif	(CONFIG_SYS_NIOS_CPU_SEVENSEG_PIO == 1)
 
-#error *** CFG_ERROR: seven segment display at PIO1 not supported, expand your config.h
+#error *** CONFIG_SYS_ERROR: seven segment display at PIO1 not supported, expand your config.h
 
-#elif	(CFG_NIOS_CPU_SEVENSEG_PIO == 2)
+#elif	(CONFIG_SYS_NIOS_CPU_SEVENSEG_PIO == 2)
 
-#error *** CFG_ERROR: seven segment display at PIO2 not supported, expand your config.h
+#error *** CONFIG_SYS_ERROR: seven segment display at PIO2 not supported, expand your config.h
 
-#elif	(CFG_NIOS_CPU_SEVENSEG_PIO == 3)
+#elif	(CONFIG_SYS_NIOS_CPU_SEVENSEG_PIO == 3)
 
-#define	SEVENSEG_BASE			CFG_NIOS_CPU_PIO3
-#define	SEVENSEG_BITS			CFG_NIOS_CPU_PIO3_BITS
+#define	SEVENSEG_BASE			CONFIG_SYS_NIOS_CPU_PIO3
+#define	SEVENSEG_BITS			CONFIG_SYS_NIOS_CPU_PIO3_BITS
 #define	SEVENSEG_ACTIVE			0 /* LED on for bit == 1 */
 
-#if	(CFG_NIOS_CPU_PIO3_TYPE == 1)
+#if	(CONFIG_SYS_NIOS_CPU_PIO3_TYPE == 1)
 #define	SEVENSEG_WRONLY			1
 #else
 #undef	SEVENSEG_WRONLY
 #endif
 
-#elif	(CFG_NIOS_CPU_SEVENSEG_PIO == 4)
+#elif	(CONFIG_SYS_NIOS_CPU_SEVENSEG_PIO == 4)
 
-#error *** CFG_ERROR: seven segment display at PIO4 not supported, expand your config.h
+#error *** CONFIG_SYS_ERROR: seven segment display at PIO4 not supported, expand your config.h
 
-#elif	(CFG_NIOS_CPU_SEVENSEG_PIO == 5)
+#elif	(CONFIG_SYS_NIOS_CPU_SEVENSEG_PIO == 5)
 
-#error *** CFG_ERROR: seven segment display at PIO5 not supported, expand your config.h
+#error *** CONFIG_SYS_ERROR: seven segment display at PIO5 not supported, expand your config.h
 
-#elif	(CFG_NIOS_CPU_SEVENSEG_PIO == 6)
+#elif	(CONFIG_SYS_NIOS_CPU_SEVENSEG_PIO == 6)
 
-#error *** CFG_ERROR: seven segment display at PIO6 not supported, expand your config.h
+#error *** CONFIG_SYS_ERROR: seven segment display at PIO6 not supported, expand your config.h
 
-#elif	(CFG_NIOS_CPU_SEVENSEG_PIO == 7)
+#elif	(CONFIG_SYS_NIOS_CPU_SEVENSEG_PIO == 7)
 
-#error *** CFG_ERROR: seven segment display at PIO7 not supported, expand your config.h
+#error *** CONFIG_SYS_ERROR: seven segment display at PIO7 not supported, expand your config.h
 
-#elif	(CFG_NIOS_CPU_SEVENSEG_PIO == 8)
+#elif	(CONFIG_SYS_NIOS_CPU_SEVENSEG_PIO == 8)
 
-#error *** CFG_ERROR: seven segment display at PIO8 not supported, expand your config.h
+#error *** CONFIG_SYS_ERROR: seven segment display at PIO8 not supported, expand your config.h
 
-#elif	(CFG_NIOS_CPU_SEVENSEG_PIO == 9)
+#elif	(CONFIG_SYS_NIOS_CPU_SEVENSEG_PIO == 9)
 
-#error *** CFG_ERROR: seven segment display at PIO9 not supported, expand your config.h
+#error *** CONFIG_SYS_ERROR: seven segment display at PIO9 not supported, expand your config.h
 
 #else
-#error *** CFG_ERROR: you have to set CFG_NIOS_CPU_SEVENSEG_PIO in right case
+#error *** CONFIG_SYS_ERROR: you have to set CONFIG_SYS_NIOS_CPU_SEVENSEG_PIO in right case
 #endif
 
 #define	CONFIG_SEVENSEG			1 /* enable seven segment led driver */
@@ -452,7 +452,7 @@
 #define	SEVENSEG_DIGIT_G		(1 << 0) /* bit 0 is segment G */
 #define	SEVENSEG_DIGIT_DP		(1 << 7) /* bit 7 is decimal point */
 
-#endif	/* CFG_NIOS_CPU_PIO_NUMS */
+#endif	/* CONFIG_SYS_NIOS_CPU_PIO_NUMS */
 
 /*
  * BOOTP options
@@ -496,48 +496,48 @@
 /*------------------------------------------------------------------------
  * MISC
  *----------------------------------------------------------------------*/
-#define	CFG_LONGHELP			    /* undef to save memory	*/
-#define	CFG_PROMPT		"DK1S10 > " /* Monitor Command Prompt	*/
-#define	CFG_CBSIZE		256	    /* Console I/O Buffer Size	*/
-#define	CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define	CFG_MAXARGS		16	    /* max number of command args*/
-#define CFG_BARGSIZE		CFG_CBSIZE  /* Boot Argument Buffer Size */
+#define	CONFIG_SYS_LONGHELP			    /* undef to save memory	*/
+#define	CONFIG_SYS_PROMPT		"DK1S10 > " /* Monitor Command Prompt	*/
+#define	CONFIG_SYS_CBSIZE		256	    /* Console I/O Buffer Size	*/
+#define	CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define	CONFIG_SYS_MAXARGS		16	    /* max number of command args*/
+#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE  /* Boot Argument Buffer Size */
 
 /* Default load address	*/
-#if	(CFG_SRAM_SIZE != 0)
+#if	(CONFIG_SYS_SRAM_SIZE != 0)
 
 /* default in SRAM */
-#define	CFG_LOAD_ADDR		CFG_SRAM_BASE
+#define	CONFIG_SYS_LOAD_ADDR		CONFIG_SYS_SRAM_BASE
 
-#elif	(CFG_SDRAM_SIZE != 0)
+#elif	(CONFIG_SYS_SDRAM_SIZE != 0)
 
 /* default in SDRAM */
-#if	(CFG_SDRAM_BASE == CFG_NIOS_CPU_VEC_BASE)
-#define	CFG_LOAD_ADDR		(CFG_SDRAM_BASE + CFG_NIOS_CPU_VEC_SIZE)
+#if	(CONFIG_SYS_SDRAM_BASE == CONFIG_SYS_NIOS_CPU_VEC_BASE)
+#define	CONFIG_SYS_LOAD_ADDR		(CONFIG_SYS_SDRAM_BASE + CONFIG_SYS_NIOS_CPU_VEC_SIZE)
 #else
-#define	CFG_LOAD_ADDR		CFG_SDRAM_BASE
+#define	CONFIG_SYS_LOAD_ADDR		CONFIG_SYS_SDRAM_BASE
 #endif
 
 #else
-#undef	CFG_LOAD_ADDR		/* force error break */
+#undef	CONFIG_SYS_LOAD_ADDR		/* force error break */
 #endif
 
 
 /* MEM test area */
-#if	(CFG_SDRAM_SIZE != 0)
+#if	(CONFIG_SYS_SDRAM_SIZE != 0)
 
 /* SDRAM begin to stack area (1MB stack) */
-#if	(CFG_SDRAM_BASE == CFG_NIOS_CPU_VEC_BASE)
-#define	CFG_MEMTEST_START	(CFG_SDRAM_BASE + CFG_NIOS_CPU_VEC_SIZE)
-#define	CFG_MEMTEST_END		(CFG_INIT_SP - (1024 * 1024))
+#if	(CONFIG_SYS_SDRAM_BASE == CONFIG_SYS_NIOS_CPU_VEC_BASE)
+#define	CONFIG_SYS_MEMTEST_START	(CONFIG_SYS_SDRAM_BASE + CONFIG_SYS_NIOS_CPU_VEC_SIZE)
+#define	CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_INIT_SP - (1024 * 1024))
 #else
-#define	CFG_MEMTEST_START	CFG_SDRAM_BASE
-#define	CFG_MEMTEST_END		(CFG_INIT_SP - (1024 * 1024))
+#define	CONFIG_SYS_MEMTEST_START	CONFIG_SYS_SDRAM_BASE
+#define	CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_INIT_SP - (1024 * 1024))
 #endif
 
 #else
-#undef	CFG_MEMTEST_START	/* force error break */
-#undef	CFG_MEMTEST_END
+#undef	CONFIG_SYS_MEMTEST_START	/* force error break */
+#undef	CONFIG_SYS_MEMTEST_END
 #endif
 
 /*
diff --git a/include/configs/DK1S10_mtx_ldk_20.h b/include/configs/DK1S10_mtx_ldk_20.h
index 011569941..87a8a5438 100644
--- a/include/configs/DK1S10_mtx_ldk_20.h
+++ b/include/configs/DK1S10_mtx_ldk_20.h
@@ -30,158 +30,158 @@
  * Here we must define CPU dependencies. Any unsupported option have to
  * be defined with zero, example CPU without data cache / OCI:
  *
- *	#define	CFG_NIOS_CPU_ICACHE	4096
- *	#define	CFG_NIOS_CPU_DCACHE	0
- *	#define	CFG_NIOS_CPU_OCI_BASE	0
- *	#define	CFG_NIOS_CPU_OCI_SIZE	0
+ *	#define	CONFIG_SYS_NIOS_CPU_ICACHE	4096
+ *	#define	CONFIG_SYS_NIOS_CPU_DCACHE	0
+ *	#define	CONFIG_SYS_NIOS_CPU_OCI_BASE	0
+ *	#define	CONFIG_SYS_NIOS_CPU_OCI_SIZE	0
  */
 
 /* CPU core */
-#define	CFG_NIOS_CPU_CLK	75000000	/* NIOS CPU clock	*/
-#define	CFG_NIOS_CPU_ICACHE	(0)		/* instruction cache	*/
-#define	CFG_NIOS_CPU_DCACHE	(0)		/* data cache		*/
-#define	CFG_NIOS_CPU_REG_NUMS	512		/* number of register	*/
-#define	CFG_NIOS_CPU_MUL	0		/* 16x16 MUL:	no(0)	*/
+#define	CONFIG_SYS_NIOS_CPU_CLK	75000000	/* NIOS CPU clock	*/
+#define	CONFIG_SYS_NIOS_CPU_ICACHE	(0)		/* instruction cache	*/
+#define	CONFIG_SYS_NIOS_CPU_DCACHE	(0)		/* data cache		*/
+#define	CONFIG_SYS_NIOS_CPU_REG_NUMS	512		/* number of register	*/
+#define	CONFIG_SYS_NIOS_CPU_MUL	0		/* 16x16 MUL:	no(0)	*/
 						/*		yes(1)	*/
-#define	CFG_NIOS_CPU_MSTEP	1		/* 16x16 MSTEP:	no(0)	*/
+#define	CONFIG_SYS_NIOS_CPU_MSTEP	1		/* 16x16 MSTEP:	no(0)	*/
 						/*		yes(1)	*/
-#define	CFG_NIOS_CPU_STACK	0x02000000	/* stack top	addr	*/
-#define	CFG_NIOS_CPU_VEC_BASE	0x01000000	/* IRQ vectors	addr	*/
-#define	CFG_NIOS_CPU_VEC_SIZE	256		/*		size	*/
-#define	CFG_NIOS_CPU_VEC_NUMS	64		/*		numbers	*/
-#define	CFG_NIOS_CPU_RST_VECT	0x00000000	/* RESET vector	addr	*/
-#define	CFG_NIOS_CPU_DBG_CORE	0		/* CPU debug:	no(0)	*/
+#define	CONFIG_SYS_NIOS_CPU_STACK	0x02000000	/* stack top	addr	*/
+#define	CONFIG_SYS_NIOS_CPU_VEC_BASE	0x01000000	/* IRQ vectors	addr	*/
+#define	CONFIG_SYS_NIOS_CPU_VEC_SIZE	256		/*		size	*/
+#define	CONFIG_SYS_NIOS_CPU_VEC_NUMS	64		/*		numbers	*/
+#define	CONFIG_SYS_NIOS_CPU_RST_VECT	0x00000000	/* RESET vector	addr	*/
+#define	CONFIG_SYS_NIOS_CPU_DBG_CORE	0		/* CPU debug:	no(0)	*/
 						/*		yes(1)	*/
 
 /* The offset address in flash to check for the Nios signature "Ni".
  * (see GM_FlashExec in germs_monitor.s) */
-#define	CFG_NIOS_CPU_EXES_OFFS	0x0C
+#define	CONFIG_SYS_NIOS_CPU_EXES_OFFS	0x0C
 
 /* on-chip extensions */
-#undef	CFG_NIOS_CPU_RAM_BASE			/* on chip RAM	addr	*/
-#undef	CFG_NIOS_CPU_RAM_SIZE			/* 64 KB	size	*/
+#undef	CONFIG_SYS_NIOS_CPU_RAM_BASE			/* on chip RAM	addr	*/
+#undef	CONFIG_SYS_NIOS_CPU_RAM_SIZE			/* 64 KB	size	*/
 
-#define	CFG_NIOS_CPU_ROM_BASE	0x00000000	/* on chip ROM	addr	*/
-#define	CFG_NIOS_CPU_ROM_SIZE	(2 * 1024)	/*  2 KB	size	*/
+#define	CONFIG_SYS_NIOS_CPU_ROM_BASE	0x00000000	/* on chip ROM	addr	*/
+#define	CONFIG_SYS_NIOS_CPU_ROM_SIZE	(2 * 1024)	/*  2 KB	size	*/
 
-#undef	CFG_NIOS_CPU_OCI_BASE			/* OCI core	addr	*/
-#undef	CFG_NIOS_CPU_OCI_SIZE			/*		size	*/
+#undef	CONFIG_SYS_NIOS_CPU_OCI_BASE			/* OCI core	addr	*/
+#undef	CONFIG_SYS_NIOS_CPU_OCI_SIZE			/*		size	*/
 
 /* timer */
-#define	CFG_NIOS_CPU_TIMER_NUMS	1		/* number of timer	*/
+#define	CONFIG_SYS_NIOS_CPU_TIMER_NUMS	1		/* number of timer	*/
 
-#define	CFG_NIOS_CPU_TIMER0	0x00000840	/* TIMER0	addr	*/
-#define	CFG_NIOS_CPU_TIMER0_IRQ	16		/*		IRQ	*/
-#define	CFG_NIOS_CPU_TIMER0_PER	1000		/*  periode	usec	*/
-#define	CFG_NIOS_CPU_TIMER0_AR	0		/*  always run:	no(0)	*/
+#define	CONFIG_SYS_NIOS_CPU_TIMER0	0x00000840	/* TIMER0	addr	*/
+#define	CONFIG_SYS_NIOS_CPU_TIMER0_IRQ	16		/*		IRQ	*/
+#define	CONFIG_SYS_NIOS_CPU_TIMER0_PER	1000		/*  periode	usec	*/
+#define	CONFIG_SYS_NIOS_CPU_TIMER0_AR	0		/*  always run:	no(0)	*/
 						/*		yes(1)	*/
-#define	CFG_NIOS_CPU_TIMER0_FP	0		/*  fixed per:	no(0)	*/
+#define	CONFIG_SYS_NIOS_CPU_TIMER0_FP	0		/*  fixed per:	no(0)	*/
 						/*		yes(1)	*/
-#define	CFG_NIOS_CPU_TIMER0_SS	1		/*  snaphot:	no(0)	*/
+#define	CONFIG_SYS_NIOS_CPU_TIMER0_SS	1		/*  snaphot:	no(0)	*/
 						/*		yes(1)	*/
 
 /* serial i/o */
-#define	CFG_NIOS_CPU_UART_NUMS	2		/* number of uarts	*/
-
-#define	CFG_NIOS_CPU_UART0	0x00000800	/* UART0	addr	*/
-#define	CFG_NIOS_CPU_UART0_IRQ	17		/*		IRQ	*/
-#define	CFG_NIOS_CPU_UART0_BR	115200		/*  baudrate	var(0)	*/
-#define	CFG_NIOS_CPU_UART0_DB	8		/*  data bit		*/
-#define	CFG_NIOS_CPU_UART0_SB	2		/*  stop bit		*/
-#define	CFG_NIOS_CPU_UART0_PA	0		/*  parity	none(0)	*/
+#define	CONFIG_SYS_NIOS_CPU_UART_NUMS	2		/* number of uarts	*/
+
+#define	CONFIG_SYS_NIOS_CPU_UART0	0x00000800	/* UART0	addr	*/
+#define	CONFIG_SYS_NIOS_CPU_UART0_IRQ	17		/*		IRQ	*/
+#define	CONFIG_SYS_NIOS_CPU_UART0_BR	115200		/*  baudrate	var(0)	*/
+#define	CONFIG_SYS_NIOS_CPU_UART0_DB	8		/*  data bit		*/
+#define	CONFIG_SYS_NIOS_CPU_UART0_SB	2		/*  stop bit		*/
+#define	CONFIG_SYS_NIOS_CPU_UART0_PA	0		/*  parity	none(0)	*/
 						/*		odd(1)	*/
 						/*		even(2)	*/
-#define	CFG_NIOS_CPU_UART0_HS	0		/*  handshake:	no(0)	*/
+#define	CONFIG_SYS_NIOS_CPU_UART0_HS	0		/*  handshake:	no(0)	*/
 						/*		crts(1)	*/
-#define	CFG_NIOS_CPU_UART0_EOP	0		/*  eop reg:	no(0)	*/
+#define	CONFIG_SYS_NIOS_CPU_UART0_EOP	0		/*  eop reg:	no(0)	*/
 						/*		yes(1)	*/
 
-#define	CFG_NIOS_CPU_UART1	0x000008a0	/* UART1	addr	*/
-#define	CFG_NIOS_CPU_UART1_IRQ	18		/*		IRQ	*/
-#define	CFG_NIOS_CPU_UART1_BR	115200		/*  baudrate	var(0)	*/
-#define	CFG_NIOS_CPU_UART1_DB	8		/*  data bit		*/
-#define	CFG_NIOS_CPU_UART1_SB	1		/*  stop bit		*/
-#define	CFG_NIOS_CPU_UART1_PA	0		/*  parity	none(0)	*/
+#define	CONFIG_SYS_NIOS_CPU_UART1	0x000008a0	/* UART1	addr	*/
+#define	CONFIG_SYS_NIOS_CPU_UART1_IRQ	18		/*		IRQ	*/
+#define	CONFIG_SYS_NIOS_CPU_UART1_BR	115200		/*  baudrate	var(0)	*/
+#define	CONFIG_SYS_NIOS_CPU_UART1_DB	8		/*  data bit		*/
+#define	CONFIG_SYS_NIOS_CPU_UART1_SB	1		/*  stop bit		*/
+#define	CONFIG_SYS_NIOS_CPU_UART1_PA	0		/*  parity	none(0)	*/
 						/*		odd(1)	*/
 						/*		even(2)	*/
-#define	CFG_NIOS_CPU_UART1_HS	0		/*  handshake:	no(0)	*/
+#define	CONFIG_SYS_NIOS_CPU_UART1_HS	0		/*  handshake:	no(0)	*/
 						/*		crts(1)	*/
-#define	CFG_NIOS_CPU_UART1_EOP	0		/*  eop reg:	no(0)	*/
+#define	CONFIG_SYS_NIOS_CPU_UART1_EOP	0		/*  eop reg:	no(0)	*/
 						/*		yes(1)	*/
 
 /* parallel i/o */
-#define	CFG_NIOS_CPU_PIO_NUMS	2		/* number of parports	*/
+#define	CONFIG_SYS_NIOS_CPU_PIO_NUMS	2		/* number of parports	*/
 
-#define	CFG_NIOS_CPU_PIO0	0x00000860	/* PIO0		addr	*/
-#undef	CFG_NIOS_CPU_PIO0_IRQ			/*		w/o IRQ	*/
-#define	CFG_NIOS_CPU_PIO0_BITS	1		/*  number  of  bits	*/
-#define	CFG_NIOS_CPU_PIO0_TYPE	1		/*  io type:	tris(0)	*/
+#define	CONFIG_SYS_NIOS_CPU_PIO0	0x00000860	/* PIO0		addr	*/
+#undef	CONFIG_SYS_NIOS_CPU_PIO0_IRQ			/*		w/o IRQ	*/
+#define	CONFIG_SYS_NIOS_CPU_PIO0_BITS	1		/*  number  of  bits	*/
+#define	CONFIG_SYS_NIOS_CPU_PIO0_TYPE	1		/*  io type:	tris(0)	*/
 						/*		out(1)	*/
 						/*		in(2)	*/
-#define	CFG_NIOS_CPU_PIO0_CAP	0		/*  capture:	no(0)	*/
+#define	CONFIG_SYS_NIOS_CPU_PIO0_CAP	0		/*  capture:	no(0)	*/
 						/*		yes(1)	*/
-#define	CFG_NIOS_CPU_PIO0_EDGE	0		/*  edge type:	none(0)	*/
+#define	CONFIG_SYS_NIOS_CPU_PIO0_EDGE	0		/*  edge type:	none(0)	*/
 						/*		fall(1)	*/
 						/*		rise(2)	*/
 						/*		any(3)	*/
-#define	CFG_NIOS_CPU_PIO0_ITYPE	0		/*  IRQ type:	none(0)	*/
+#define	CONFIG_SYS_NIOS_CPU_PIO0_ITYPE	0		/*  IRQ type:	none(0)	*/
 						/*		level(1)*/
 						/*		edge(2)	*/
 
-#define	CFG_NIOS_CPU_PIO1	0x00000870	/* PIO1		addr	*/
-#undef	CFG_NIOS_CPU_PIO1_IRQ			/*		w/o IRQ	*/
-#define	CFG_NIOS_CPU_PIO1_BITS	4		/*  number  of  bits	*/
-#define	CFG_NIOS_CPU_PIO1_TYPE	2		/*  io type:	tris(0)	*/
+#define	CONFIG_SYS_NIOS_CPU_PIO1	0x00000870	/* PIO1		addr	*/
+#undef	CONFIG_SYS_NIOS_CPU_PIO1_IRQ			/*		w/o IRQ	*/
+#define	CONFIG_SYS_NIOS_CPU_PIO1_BITS	4		/*  number  of  bits	*/
+#define	CONFIG_SYS_NIOS_CPU_PIO1_TYPE	2		/*  io type:	tris(0)	*/
 						/*		out(1)	*/
 						/*		in(2)	*/
-#define	CFG_NIOS_CPU_PIO1_CAP	0		/*  capture:	no(0)	*/
+#define	CONFIG_SYS_NIOS_CPU_PIO1_CAP	0		/*  capture:	no(0)	*/
 						/*		yes(1)	*/
-#define	CFG_NIOS_CPU_PIO1_EDGE	0		/*  edge type:	none(0)	*/
+#define	CONFIG_SYS_NIOS_CPU_PIO1_EDGE	0		/*  edge type:	none(0)	*/
 						/*		fall(1)	*/
 						/*		rise(2)	*/
 						/*		any(3)	*/
-#define	CFG_NIOS_CPU_PIO1_ITYPE	0		/*  IRQ type:	none(0)	*/
+#define	CONFIG_SYS_NIOS_CPU_PIO1_ITYPE	0		/*  IRQ type:	none(0)	*/
 						/*		level(1)*/
 						/*		edge(2)	*/
 
 /* IDE i/f */
-#define	CFG_NIOS_CPU_IDE_NUMS	1		/* number of IDE contr.	*/
-#define	CFG_NIOS_CPU_IDE0	0x00000900	/* IDE0		addr	*/
-#define	CFG_NIOS_CPU_IDE0_IRQ	25		/*		IRQ	*/
+#define	CONFIG_SYS_NIOS_CPU_IDE_NUMS	1		/* number of IDE contr.	*/
+#define	CONFIG_SYS_NIOS_CPU_IDE0	0x00000900	/* IDE0		addr	*/
+#define	CONFIG_SYS_NIOS_CPU_IDE0_IRQ	25		/*		IRQ	*/
 
 /* memory accessibility */
-#undef	CFG_NIOS_CPU_SRAM_BASE			/* board SRAM	addr	*/
-#undef	CFG_NIOS_CPU_SRAM_SIZE			/*  1 MB	size	*/
+#undef	CONFIG_SYS_NIOS_CPU_SRAM_BASE			/* board SRAM	addr	*/
+#undef	CONFIG_SYS_NIOS_CPU_SRAM_SIZE			/*  1 MB	size	*/
 
-#define	CFG_NIOS_CPU_SDRAM_BASE	0x01000000	/* board SDRAM	addr	*/
-#define	CFG_NIOS_CPU_SDRAM_SIZE	(16*1024*1024)	/* 16 MB	size	*/
+#define	CONFIG_SYS_NIOS_CPU_SDRAM_BASE	0x01000000	/* board SDRAM	addr	*/
+#define	CONFIG_SYS_NIOS_CPU_SDRAM_SIZE	(16*1024*1024)	/* 16 MB	size	*/
 
-#define	CFG_NIOS_CPU_FLASH_BASE	0x00800000	/* board Flash	addr	*/
-#define	CFG_NIOS_CPU_FLASH_SIZE	(8*1024*1024)	/*  8 MB	size	*/
+#define	CONFIG_SYS_NIOS_CPU_FLASH_BASE	0x00800000	/* board Flash	addr	*/
+#define	CONFIG_SYS_NIOS_CPU_FLASH_SIZE	(8*1024*1024)	/*  8 MB	size	*/
 
 /* LAN */
-#define	CFG_NIOS_CPU_LAN_NUMS	1		/* number of LAN i/f	*/
+#define	CONFIG_SYS_NIOS_CPU_LAN_NUMS	1		/* number of LAN i/f	*/
 
-#define	CFG_NIOS_CPU_LAN0_BASE	0x00010000	/* LAN0		addr	*/
-#define	CFG_NIOS_CPU_LAN0_OFFS	0x0300		/*		offset	*/
-#define	CFG_NIOS_CPU_LAN0_IRQ	20		/*		IRQ	*/
-#define	CFG_NIOS_CPU_LAN0_BUSW	32		/*	        buswidth*/
-#define	CFG_NIOS_CPU_LAN0_TYPE	0		/*	smc91111(0)	*/
+#define	CONFIG_SYS_NIOS_CPU_LAN0_BASE	0x00010000	/* LAN0		addr	*/
+#define	CONFIG_SYS_NIOS_CPU_LAN0_OFFS	0x0300		/*		offset	*/
+#define	CONFIG_SYS_NIOS_CPU_LAN0_IRQ	20		/*		IRQ	*/
+#define	CONFIG_SYS_NIOS_CPU_LAN0_BUSW	32		/*	        buswidth*/
+#define	CONFIG_SYS_NIOS_CPU_LAN0_TYPE	0		/*	smc91111(0)	*/
 						/*	cs8900(1)	*/
 						/* ex:	openmac(2)	*/
 						/* ex:	alteramac(3)	*/
 
 /* symbolic redefinition (undef, if not present) */
-#define	CFG_NIOS_CPU_TICK_TIMER		0	/* TIMER0: tick (needed)*/
-#undef	CFG_NIOS_CPU_USER_TIMER			/* TIMERx: users choice	*/
-
-#define	CFG_NIOS_CPU_CFPOWER_PIO	0	/* PIO0: CF power/sw.	*/
-#define	CFG_NIOS_CPU_BUTTON_PIO		1	/* PIO1: buttons	*/
-#undef	CFG_NIOS_CPU_LCD_PIO			/* PIOx: ASCII LCD	*/
-#undef	CFG_NIOS_CPU_LED_PIO			/* PIOx: LED bar	*/
-#undef	CFG_NIOS_CPU_SEVENSEG_PIO		/* PIOx: 7-seg. display	*/
-#undef	CFG_NIOS_CPU_RECONF_PIO			/* PIOx: reconf pin	*/
-#undef	CFG_NIOS_CPU_CFPRESENT_PIO		/* PIOx: CF present IRQ	*/
-#undef	CFG_NIOS_CPU_CFATASEL_PIO		/* PIOx: CF ATA select	*/
+#define	CONFIG_SYS_NIOS_CPU_TICK_TIMER		0	/* TIMER0: tick (needed)*/
+#undef	CONFIG_SYS_NIOS_CPU_USER_TIMER			/* TIMERx: users choice	*/
+
+#define	CONFIG_SYS_NIOS_CPU_CFPOWER_PIO	0	/* PIO0: CF power/sw.	*/
+#define	CONFIG_SYS_NIOS_CPU_BUTTON_PIO		1	/* PIO1: buttons	*/
+#undef	CONFIG_SYS_NIOS_CPU_LCD_PIO			/* PIOx: ASCII LCD	*/
+#undef	CONFIG_SYS_NIOS_CPU_LED_PIO			/* PIOx: LED bar	*/
+#undef	CONFIG_SYS_NIOS_CPU_SEVENSEG_PIO		/* PIOx: 7-seg. display	*/
+#undef	CONFIG_SYS_NIOS_CPU_RECONF_PIO			/* PIOx: reconf pin	*/
+#undef	CONFIG_SYS_NIOS_CPU_CFPRESENT_PIO		/* PIOx: CF present IRQ	*/
+#undef	CONFIG_SYS_NIOS_CPU_CFATASEL_PIO		/* PIOx: CF ATA select	*/
 
 #endif	/* __CONFIG_DK1S10_MTX_LDK_20_H */
diff --git a/include/configs/DK1S10_safe_32.h b/include/configs/DK1S10_safe_32.h
index 8541a119f..ced4ef281 100644
--- a/include/configs/DK1S10_safe_32.h
+++ b/include/configs/DK1S10_safe_32.h
@@ -29,6 +29,6 @@
  *
  * !!! TODO !!! TODO !!!
  */
-#error *** CFG_ERROR: DK1S10_safe_32 have to be defined (use DK1S10_standard_32 as template)
+#error *** CONFIG_SYS_ERROR: DK1S10_safe_32 have to be defined (use DK1S10_standard_32 as template)
 
 #endif	/* __CONFIG_DK1S10_SAFE_32_H */
diff --git a/include/configs/DK1S10_standard_32.h b/include/configs/DK1S10_standard_32.h
index b83c31592..e6ccaf57a 100644
--- a/include/configs/DK1S10_standard_32.h
+++ b/include/configs/DK1S10_standard_32.h
@@ -30,245 +30,245 @@
  * Here we must define CPU dependencies. Any unsupported option have to
  * be defined with zero, example CPU without data cache / OCI:
  *
- *	#define	CFG_NIOS_CPU_ICACHE	4096
- *	#define	CFG_NIOS_CPU_DCACHE	0
- *	#define	CFG_NIOS_CPU_OCI_BASE	0
- *	#define	CFG_NIOS_CPU_OCI_SIZE	0
+ *	#define	CONFIG_SYS_NIOS_CPU_ICACHE	4096
+ *	#define	CONFIG_SYS_NIOS_CPU_DCACHE	0
+ *	#define	CONFIG_SYS_NIOS_CPU_OCI_BASE	0
+ *	#define	CONFIG_SYS_NIOS_CPU_OCI_SIZE	0
  */
 
 /* CPU core */
-#define	CFG_NIOS_CPU_CLK	50000000	/* NIOS CPU clock	*/
-#define	CFG_NIOS_CPU_ICACHE	(4 * 1024)	/* instruction cache	*/
-#define	CFG_NIOS_CPU_DCACHE	(4 * 1024)	/* data cache		*/
-#define	CFG_NIOS_CPU_REG_NUMS	256		/* number of register	*/
-#define	CFG_NIOS_CPU_MUL	0		/* 16x16 MUL:	no(0)	*/
+#define	CONFIG_SYS_NIOS_CPU_CLK	50000000	/* NIOS CPU clock	*/
+#define	CONFIG_SYS_NIOS_CPU_ICACHE	(4 * 1024)	/* instruction cache	*/
+#define	CONFIG_SYS_NIOS_CPU_DCACHE	(4 * 1024)	/* data cache		*/
+#define	CONFIG_SYS_NIOS_CPU_REG_NUMS	256		/* number of register	*/
+#define	CONFIG_SYS_NIOS_CPU_MUL	0		/* 16x16 MUL:	no(0)	*/
 						/*		yes(1)	*/
-#define	CFG_NIOS_CPU_MSTEP	1		/* 16x16 MSTEP:	no(0)	*/
+#define	CONFIG_SYS_NIOS_CPU_MSTEP	1		/* 16x16 MSTEP:	no(0)	*/
 						/*		yes(1)	*/
-#define	CFG_NIOS_CPU_STACK	0x008fff00	/* stack top	addr	*/
-#define	CFG_NIOS_CPU_VEC_BASE	0x008fff00	/* IRQ vectors	addr	*/
-#define	CFG_NIOS_CPU_VEC_SIZE	256		/*		size	*/
-#define	CFG_NIOS_CPU_VEC_NUMS	64		/*		numbers	*/
-#define	CFG_NIOS_CPU_RST_VECT	0x00920000	/* RESET vector	addr	*/
-#define	CFG_NIOS_CPU_DBG_CORE	0		/* CPU debug:	no(0)	*/
+#define	CONFIG_SYS_NIOS_CPU_STACK	0x008fff00	/* stack top	addr	*/
+#define	CONFIG_SYS_NIOS_CPU_VEC_BASE	0x008fff00	/* IRQ vectors	addr	*/
+#define	CONFIG_SYS_NIOS_CPU_VEC_SIZE	256		/*		size	*/
+#define	CONFIG_SYS_NIOS_CPU_VEC_NUMS	64		/*		numbers	*/
+#define	CONFIG_SYS_NIOS_CPU_RST_VECT	0x00920000	/* RESET vector	addr	*/
+#define	CONFIG_SYS_NIOS_CPU_DBG_CORE	0		/* CPU debug:	no(0)	*/
 						/*		yes(1)	*/
 
 /* on-chip extensions */
-#define	CFG_NIOS_CPU_RAM_BASE	0x00900000	/* on chip RAM	addr	*/
-#define	CFG_NIOS_CPU_RAM_SIZE	(64 * 1024)	/* 64 KB	size	*/
+#define	CONFIG_SYS_NIOS_CPU_RAM_BASE	0x00900000	/* on chip RAM	addr	*/
+#define	CONFIG_SYS_NIOS_CPU_RAM_SIZE	(64 * 1024)	/* 64 KB	size	*/
 
-#define	CFG_NIOS_CPU_ROM_BASE	0x00920000	/* on chip ROM	addr	*/
-#define	CFG_NIOS_CPU_ROM_SIZE	(2 * 1024)	/*  2 KB	size	*/
+#define	CONFIG_SYS_NIOS_CPU_ROM_BASE	0x00920000	/* on chip ROM	addr	*/
+#define	CONFIG_SYS_NIOS_CPU_ROM_SIZE	(2 * 1024)	/*  2 KB	size	*/
 
-#define	CFG_NIOS_CPU_OCI_BASE	0x00920800	/* OCI core	addr	*/
-#define	CFG_NIOS_CPU_OCI_SIZE	256		/*		size	*/
+#define	CONFIG_SYS_NIOS_CPU_OCI_BASE	0x00920800	/* OCI core	addr	*/
+#define	CONFIG_SYS_NIOS_CPU_OCI_SIZE	256		/*		size	*/
 
 /* timer */
-#define	CFG_NIOS_CPU_TIMER_NUMS	2		/* number of timer	*/
+#define	CONFIG_SYS_NIOS_CPU_TIMER_NUMS	2		/* number of timer	*/
 
-#define	CFG_NIOS_CPU_TIMER0	0x00920940	/* TIMER0	addr	*/
-#define	CFG_NIOS_CPU_TIMER0_IRQ	16		/*		IRQ	*/
-#define	CFG_NIOS_CPU_TIMER0_PER	1000		/*  periode	usec	*/
-#define	CFG_NIOS_CPU_TIMER0_AR	0		/*  always run:	no(0)	*/
+#define	CONFIG_SYS_NIOS_CPU_TIMER0	0x00920940	/* TIMER0	addr	*/
+#define	CONFIG_SYS_NIOS_CPU_TIMER0_IRQ	16		/*		IRQ	*/
+#define	CONFIG_SYS_NIOS_CPU_TIMER0_PER	1000		/*  periode	usec	*/
+#define	CONFIG_SYS_NIOS_CPU_TIMER0_AR	0		/*  always run:	no(0)	*/
 						/*		yes(1)	*/
-#define	CFG_NIOS_CPU_TIMER0_FP	0		/*  fixed per:	no(0)	*/
+#define	CONFIG_SYS_NIOS_CPU_TIMER0_FP	0		/*  fixed per:	no(0)	*/
 						/*		yes(1)	*/
-#define	CFG_NIOS_CPU_TIMER0_SS	1		/*  snaphot:	no(0)	*/
+#define	CONFIG_SYS_NIOS_CPU_TIMER0_SS	1		/*  snaphot:	no(0)	*/
 						/*		yes(1)	*/
 
-#define	CFG_NIOS_CPU_TIMER1	0x009209e0	/* TIMER1	addr	*/
-#define	CFG_NIOS_CPU_TIMER1_IRQ	50		/*		IRQ	*/
-#define	CFG_NIOS_CPU_TIMER1_PER	10000		/*  periode	usec	*/
-#define	CFG_NIOS_CPU_TIMER1_AR	1		/*  always run:	no(0)	*/
+#define	CONFIG_SYS_NIOS_CPU_TIMER1	0x009209e0	/* TIMER1	addr	*/
+#define	CONFIG_SYS_NIOS_CPU_TIMER1_IRQ	50		/*		IRQ	*/
+#define	CONFIG_SYS_NIOS_CPU_TIMER1_PER	10000		/*  periode	usec	*/
+#define	CONFIG_SYS_NIOS_CPU_TIMER1_AR	1		/*  always run:	no(0)	*/
 						/*		yes(1)	*/
-#define	CFG_NIOS_CPU_TIMER1_FP	1		/*  fixed per:	no(0)	*/
+#define	CONFIG_SYS_NIOS_CPU_TIMER1_FP	1		/*  fixed per:	no(0)	*/
 						/*		yes(1)	*/
-#define	CFG_NIOS_CPU_TIMER1_SS	0		/*  snaphot:	no(0)	*/
+#define	CONFIG_SYS_NIOS_CPU_TIMER1_SS	0		/*  snaphot:	no(0)	*/
 						/*		yes(1)	*/
 
 /* serial i/o */
-#define	CFG_NIOS_CPU_UART_NUMS	1		/* number of uarts	*/
+#define	CONFIG_SYS_NIOS_CPU_UART_NUMS	1		/* number of uarts	*/
 
-#define	CFG_NIOS_CPU_UART0	0x00920900	/* UART0	addr	*/
-#define	CFG_NIOS_CPU_UART0_IRQ	25		/*		IRQ	*/
-#define	CFG_NIOS_CPU_UART0_BR	115200		/*  baudrate	var(0)	*/
-#define	CFG_NIOS_CPU_UART0_DB	8		/*  data bit		*/
-#define	CFG_NIOS_CPU_UART0_SB	1		/*  stop bit		*/
-#define	CFG_NIOS_CPU_UART0_PA	0		/*  parity	none(0)	*/
+#define	CONFIG_SYS_NIOS_CPU_UART0	0x00920900	/* UART0	addr	*/
+#define	CONFIG_SYS_NIOS_CPU_UART0_IRQ	25		/*		IRQ	*/
+#define	CONFIG_SYS_NIOS_CPU_UART0_BR	115200		/*  baudrate	var(0)	*/
+#define	CONFIG_SYS_NIOS_CPU_UART0_DB	8		/*  data bit		*/
+#define	CONFIG_SYS_NIOS_CPU_UART0_SB	1		/*  stop bit		*/
+#define	CONFIG_SYS_NIOS_CPU_UART0_PA	0		/*  parity	none(0)	*/
 						/*		odd(1)	*/
 						/*		even(2)	*/
-#define	CFG_NIOS_CPU_UART0_HS	0		/*  handshake:	no(0)	*/
+#define	CONFIG_SYS_NIOS_CPU_UART0_HS	0		/*  handshake:	no(0)	*/
 						/*		crts(1)	*/
-#define	CFG_NIOS_CPU_UART0_EOP	0		/*  eop reg:	no(0)	*/
+#define	CONFIG_SYS_NIOS_CPU_UART0_EOP	0		/*  eop reg:	no(0)	*/
 						/*		yes(1)	*/
 
 /* parallel i/o */
-#define	CFG_NIOS_CPU_PIO_NUMS	8		/* number of parports	*/
+#define	CONFIG_SYS_NIOS_CPU_PIO_NUMS	8		/* number of parports	*/
 
-#define	CFG_NIOS_CPU_PIO0	0x00920960	/* PIO0		addr	*/
-#define	CFG_NIOS_CPU_PIO0_IRQ	40		/*		IRQ	*/
-#define	CFG_NIOS_CPU_PIO0_BITS	4		/*  number  of  bits	*/
-#define	CFG_NIOS_CPU_PIO0_TYPE	2		/*  io type:	tris(0)	*/
+#define	CONFIG_SYS_NIOS_CPU_PIO0	0x00920960	/* PIO0		addr	*/
+#define	CONFIG_SYS_NIOS_CPU_PIO0_IRQ	40		/*		IRQ	*/
+#define	CONFIG_SYS_NIOS_CPU_PIO0_BITS	4		/*  number  of  bits	*/
+#define	CONFIG_SYS_NIOS_CPU_PIO0_TYPE	2		/*  io type:	tris(0)	*/
 						/*		out(1)	*/
 						/*		in(2)	*/
-#define	CFG_NIOS_CPU_PIO0_CAP	1		/*  capture:	no(0)	*/
+#define	CONFIG_SYS_NIOS_CPU_PIO0_CAP	1		/*  capture:	no(0)	*/
 						/*		yes(1)	*/
-#define	CFG_NIOS_CPU_PIO0_EDGE	3		/*  edge type:	none(0)	*/
+#define	CONFIG_SYS_NIOS_CPU_PIO0_EDGE	3		/*  edge type:	none(0)	*/
 						/*		fall(1)	*/
 						/*		rise(2)	*/
 						/*		any(3)	*/
-#define	CFG_NIOS_CPU_PIO0_ITYPE	2		/*  IRQ type:	none(0)	*/
+#define	CONFIG_SYS_NIOS_CPU_PIO0_ITYPE	2		/*  IRQ type:	none(0)	*/
 						/*		level(1)*/
 						/*		edge(2)	*/
 
-#define	CFG_NIOS_CPU_PIO1	0x00920970	/* PIO1		addr	*/
-#undef	CFG_NIOS_CPU_PIO1_IRQ			/*		w/o IRQ	*/
-#define	CFG_NIOS_CPU_PIO1_BITS	11		/*  number  of  bits	*/
-#define	CFG_NIOS_CPU_PIO1_TYPE	0		/*  io type:	tris(0)	*/
+#define	CONFIG_SYS_NIOS_CPU_PIO1	0x00920970	/* PIO1		addr	*/
+#undef	CONFIG_SYS_NIOS_CPU_PIO1_IRQ			/*		w/o IRQ	*/
+#define	CONFIG_SYS_NIOS_CPU_PIO1_BITS	11		/*  number  of  bits	*/
+#define	CONFIG_SYS_NIOS_CPU_PIO1_TYPE	0		/*  io type:	tris(0)	*/
 						/*		out(1)	*/
 						/*		in(2)	*/
-#define	CFG_NIOS_CPU_PIO1_CAP	0		/*  capture:	no(0)	*/
+#define	CONFIG_SYS_NIOS_CPU_PIO1_CAP	0		/*  capture:	no(0)	*/
 						/*		yes(1)	*/
-#define	CFG_NIOS_CPU_PIO1_EDGE	0		/*  edge type:	none(0)	*/
+#define	CONFIG_SYS_NIOS_CPU_PIO1_EDGE	0		/*  edge type:	none(0)	*/
 						/*		fall(1)	*/
 						/*		rise(2)	*/
 						/*		any(3)	*/
-#define	CFG_NIOS_CPU_PIO1_ITYPE	0		/*  IRQ type:	none(0)	*/
+#define	CONFIG_SYS_NIOS_CPU_PIO1_ITYPE	0		/*  IRQ type:	none(0)	*/
 						/*		level(1)*/
 						/*		edge(2)	*/
 
-#define	CFG_NIOS_CPU_PIO2	0x00920980	/* PIO2		addr	*/
-#undef	CFG_NIOS_CPU_PIO2_IRQ			/*		w/o IRQ	*/
-#define	CFG_NIOS_CPU_PIO2_BITS	8		/*  number  of  bits	*/
-#define	CFG_NIOS_CPU_PIO2_TYPE	1		/*  io type:	tris(0)	*/
+#define	CONFIG_SYS_NIOS_CPU_PIO2	0x00920980	/* PIO2		addr	*/
+#undef	CONFIG_SYS_NIOS_CPU_PIO2_IRQ			/*		w/o IRQ	*/
+#define	CONFIG_SYS_NIOS_CPU_PIO2_BITS	8		/*  number  of  bits	*/
+#define	CONFIG_SYS_NIOS_CPU_PIO2_TYPE	1		/*  io type:	tris(0)	*/
 						/*		out(1)	*/
 						/*		in(2)	*/
-#define	CFG_NIOS_CPU_PIO2_CAP	0		/*  capture:	no(0)	*/
+#define	CONFIG_SYS_NIOS_CPU_PIO2_CAP	0		/*  capture:	no(0)	*/
 						/*		yes(1)	*/
-#define	CFG_NIOS_CPU_PIO2_EDGE	0		/*  edge type:	none(0)	*/
+#define	CONFIG_SYS_NIOS_CPU_PIO2_EDGE	0		/*  edge type:	none(0)	*/
 						/*		fall(1)	*/
 						/*		rise(2)	*/
 						/*		any(3)	*/
-#define	CFG_NIOS_CPU_PIO2_ITYPE	0		/*  IRQ type:	none(0)	*/
+#define	CONFIG_SYS_NIOS_CPU_PIO2_ITYPE	0		/*  IRQ type:	none(0)	*/
 						/*		level(1)*/
 						/*		edge(2)	*/
 
-#define	CFG_NIOS_CPU_PIO3	0x00920990	/* PIO3		addr	*/
-#undef	CFG_NIOS_CPU_PIO3_IRQ			/*		w/o IRQ	*/
-#define	CFG_NIOS_CPU_PIO3_BITS	16		/*  number  of  bits	*/
-#define	CFG_NIOS_CPU_PIO3_TYPE	1		/*  io type:	tris(0)	*/
+#define	CONFIG_SYS_NIOS_CPU_PIO3	0x00920990	/* PIO3		addr	*/
+#undef	CONFIG_SYS_NIOS_CPU_PIO3_IRQ			/*		w/o IRQ	*/
+#define	CONFIG_SYS_NIOS_CPU_PIO3_BITS	16		/*  number  of  bits	*/
+#define	CONFIG_SYS_NIOS_CPU_PIO3_TYPE	1		/*  io type:	tris(0)	*/
 						/*		out(1)	*/
 						/*		in(2)	*/
-#define	CFG_NIOS_CPU_PIO3_CAP	0		/*  capture:	no(0)	*/
+#define	CONFIG_SYS_NIOS_CPU_PIO3_CAP	0		/*  capture:	no(0)	*/
 						/*		yes(1)	*/
-#define	CFG_NIOS_CPU_PIO3_EDGE	0		/*  edge type:	none(0)	*/
+#define	CONFIG_SYS_NIOS_CPU_PIO3_EDGE	0		/*  edge type:	none(0)	*/
 						/*		fall(1)	*/
 						/*		rise(2)	*/
 						/*		any(3)	*/
-#define	CFG_NIOS_CPU_PIO3_ITYPE	0		/*  IRQ type:	none(0)	*/
+#define	CONFIG_SYS_NIOS_CPU_PIO3_ITYPE	0		/*  IRQ type:	none(0)	*/
 						/*		level(1)*/
 						/*		edge(2)	*/
 
-#define	CFG_NIOS_CPU_PIO4	0x009209a0	/* PIO4		addr	*/
-#undef	CFG_NIOS_CPU_PIO4_IRQ			/*		w/o IRQ	*/
-#define	CFG_NIOS_CPU_PIO4_BITS	1		/*  number  of  bits	*/
-#define	CFG_NIOS_CPU_PIO4_TYPE	0		/*  io type:	tris(0)	*/
+#define	CONFIG_SYS_NIOS_CPU_PIO4	0x009209a0	/* PIO4		addr	*/
+#undef	CONFIG_SYS_NIOS_CPU_PIO4_IRQ			/*		w/o IRQ	*/
+#define	CONFIG_SYS_NIOS_CPU_PIO4_BITS	1		/*  number  of  bits	*/
+#define	CONFIG_SYS_NIOS_CPU_PIO4_TYPE	0		/*  io type:	tris(0)	*/
 						/*		out(1)	*/
 						/*		in(2)	*/
-#define	CFG_NIOS_CPU_PIO4_CAP	0		/*  capture:	no(0)	*/
+#define	CONFIG_SYS_NIOS_CPU_PIO4_CAP	0		/*  capture:	no(0)	*/
 						/*		yes(1)	*/
-#define	CFG_NIOS_CPU_PIO4_EDGE	0		/*  edge type:	none(0)	*/
+#define	CONFIG_SYS_NIOS_CPU_PIO4_EDGE	0		/*  edge type:	none(0)	*/
 						/*		fall(1)	*/
 						/*		rise(2)	*/
 						/*		any(3)	*/
-#define	CFG_NIOS_CPU_PIO4_ITYPE	0		/*  IRQ type:	none(0)	*/
+#define	CONFIG_SYS_NIOS_CPU_PIO4_ITYPE	0		/*  IRQ type:	none(0)	*/
 						/*		level(1)*/
 						/*		edge(2)	*/
 
-#define	CFG_NIOS_CPU_PIO5	0x009209b0	/* PIO5		addr	*/
-#define	CFG_NIOS_CPU_PIO5_IRQ	35		/*		IRQ	*/
-#define	CFG_NIOS_CPU_PIO5_BITS	1		/*  number  of  bits	*/
-#define	CFG_NIOS_CPU_PIO5_TYPE	2		/*  io type:	tris(0)	*/
+#define	CONFIG_SYS_NIOS_CPU_PIO5	0x009209b0	/* PIO5		addr	*/
+#define	CONFIG_SYS_NIOS_CPU_PIO5_IRQ	35		/*		IRQ	*/
+#define	CONFIG_SYS_NIOS_CPU_PIO5_BITS	1		/*  number  of  bits	*/
+#define	CONFIG_SYS_NIOS_CPU_PIO5_TYPE	2		/*  io type:	tris(0)	*/
 						/*		out(1)	*/
 						/*		in(2)	*/
-#define	CFG_NIOS_CPU_PIO5_CAP	1		/*  capture:	no(0)	*/
+#define	CONFIG_SYS_NIOS_CPU_PIO5_CAP	1		/*  capture:	no(0)	*/
 						/*		yes(1)	*/
-#define	CFG_NIOS_CPU_PIO5_EDGE	3		/*  edge type:	none(0)	*/
+#define	CONFIG_SYS_NIOS_CPU_PIO5_EDGE	3		/*  edge type:	none(0)	*/
 						/*		fall(1)	*/
 						/*		rise(2)	*/
 						/*		any(3)	*/
-#define	CFG_NIOS_CPU_PIO5_ITYPE	2		/*  IRQ type:	none(0)	*/
+#define	CONFIG_SYS_NIOS_CPU_PIO5_ITYPE	2		/*  IRQ type:	none(0)	*/
 						/*		level(1)*/
 						/*		edge(2)	*/
 
-#define	CFG_NIOS_CPU_PIO6	0x009209c0	/* PIO6		addr	*/
-#undef	CFG_NIOS_CPU_PIO6_IRQ			/*		w/o IRQ	*/
-#define	CFG_NIOS_CPU_PIO6_BITS	1		/*  number  of  bits	*/
-#define	CFG_NIOS_CPU_PIO6_TYPE	1		/*  io type:	tris(0)	*/
+#define	CONFIG_SYS_NIOS_CPU_PIO6	0x009209c0	/* PIO6		addr	*/
+#undef	CONFIG_SYS_NIOS_CPU_PIO6_IRQ			/*		w/o IRQ	*/
+#define	CONFIG_SYS_NIOS_CPU_PIO6_BITS	1		/*  number  of  bits	*/
+#define	CONFIG_SYS_NIOS_CPU_PIO6_TYPE	1		/*  io type:	tris(0)	*/
 						/*		out(1)	*/
 						/*		in(2)	*/
-#define	CFG_NIOS_CPU_PIO6_CAP	0		/*  capture:	no(0)	*/
+#define	CONFIG_SYS_NIOS_CPU_PIO6_CAP	0		/*  capture:	no(0)	*/
 						/*		yes(1)	*/
-#define	CFG_NIOS_CPU_PIO6_EDGE	0		/*  edge type:	none(0)	*/
+#define	CONFIG_SYS_NIOS_CPU_PIO6_EDGE	0		/*  edge type:	none(0)	*/
 						/*		fall(1)	*/
 						/*		rise(2)	*/
 						/*		any(3)	*/
-#define	CFG_NIOS_CPU_PIO6_ITYPE	0		/*  IRQ type:	none(0)	*/
+#define	CONFIG_SYS_NIOS_CPU_PIO6_ITYPE	0		/*  IRQ type:	none(0)	*/
 						/*		level(1)*/
 						/*		edge(2)	*/
 
-#define	CFG_NIOS_CPU_PIO7	0x009209d0	/* PIO7		addr	*/
-#undef	CFG_NIOS_CPU_PIO7_IRQ			/*		w/o IRQ	*/
-#define	CFG_NIOS_CPU_PIO7_BITS	1		/*  number  of  bits	*/
-#define	CFG_NIOS_CPU_PIO7_TYPE	1		/*  io type:	tris(0)	*/
+#define	CONFIG_SYS_NIOS_CPU_PIO7	0x009209d0	/* PIO7		addr	*/
+#undef	CONFIG_SYS_NIOS_CPU_PIO7_IRQ			/*		w/o IRQ	*/
+#define	CONFIG_SYS_NIOS_CPU_PIO7_BITS	1		/*  number  of  bits	*/
+#define	CONFIG_SYS_NIOS_CPU_PIO7_TYPE	1		/*  io type:	tris(0)	*/
 						/*		out(1)	*/
 						/*		in(2)	*/
-#define	CFG_NIOS_CPU_PIO7_CAP	0		/*  capture:	no(0)	*/
+#define	CONFIG_SYS_NIOS_CPU_PIO7_CAP	0		/*  capture:	no(0)	*/
 						/*		yes(1)	*/
-#define	CFG_NIOS_CPU_PIO7_EDGE	0		/*  edge type:	none(0)	*/
+#define	CONFIG_SYS_NIOS_CPU_PIO7_EDGE	0		/*  edge type:	none(0)	*/
 						/*		fall(1)	*/
 						/*		rise(2)	*/
 						/*		any(3)	*/
-#define	CFG_NIOS_CPU_PIO7_ITYPE	0		/*  IRQ type:	none(0)	*/
+#define	CONFIG_SYS_NIOS_CPU_PIO7_ITYPE	0		/*  IRQ type:	none(0)	*/
 						/*		level(1)*/
 						/*		edge(2)	*/
 
 /* IDE i/f */
-#define	CFG_NIOS_CPU_IDE_NUMS	1		/* number of IDE contr.	*/
-#define	CFG_NIOS_CPU_IDE0	0x00920a00	/* IDE0		addr	*/
+#define	CONFIG_SYS_NIOS_CPU_IDE_NUMS	1		/* number of IDE contr.	*/
+#define	CONFIG_SYS_NIOS_CPU_IDE0	0x00920a00	/* IDE0		addr	*/
 
 /* memory accessibility */
-#define	CFG_NIOS_CPU_SRAM_BASE	0x00800000	/* board SRAM	addr	*/
-#define	CFG_NIOS_CPU_SRAM_SIZE	(1024 * 1024)	/*  1 MB	size	*/
+#define	CONFIG_SYS_NIOS_CPU_SRAM_BASE	0x00800000	/* board SRAM	addr	*/
+#define	CONFIG_SYS_NIOS_CPU_SRAM_SIZE	(1024 * 1024)	/*  1 MB	size	*/
 
-#define	CFG_NIOS_CPU_SDRAM_BASE	0x01000000	/* board SDRAM	addr	*/
-#define	CFG_NIOS_CPU_SDRAM_SIZE	(16*1024*1024)	/* 16 MB	size	*/
+#define	CONFIG_SYS_NIOS_CPU_SDRAM_BASE	0x01000000	/* board SDRAM	addr	*/
+#define	CONFIG_SYS_NIOS_CPU_SDRAM_SIZE	(16*1024*1024)	/* 16 MB	size	*/
 
-#define	CFG_NIOS_CPU_FLASH_BASE	0x00000000	/* board Flash	addr	*/
-#define	CFG_NIOS_CPU_FLASH_SIZE	(8*1024*1024)	/*  8 MB	size	*/
+#define	CONFIG_SYS_NIOS_CPU_FLASH_BASE	0x00000000	/* board Flash	addr	*/
+#define	CONFIG_SYS_NIOS_CPU_FLASH_SIZE	(8*1024*1024)	/*  8 MB	size	*/
 
 /* LAN */
-#define	CFG_NIOS_CPU_LAN_NUMS	1		/* number of LAN i/f	*/
+#define	CONFIG_SYS_NIOS_CPU_LAN_NUMS	1		/* number of LAN i/f	*/
 
-#define	CFG_NIOS_CPU_LAN0_BASE	0x00910000	/* LAN0		addr	*/
-#define	CFG_NIOS_CPU_LAN0_OFFS	0x0300		/*		offset	*/
-#define	CFG_NIOS_CPU_LAN0_IRQ	30		/*		IRQ	*/
-#define	CFG_NIOS_CPU_LAN0_BUSW	32		/*	        buswidth*/
-#define	CFG_NIOS_CPU_LAN0_TYPE	0		/*	smc91111(0)	*/
+#define	CONFIG_SYS_NIOS_CPU_LAN0_BASE	0x00910000	/* LAN0		addr	*/
+#define	CONFIG_SYS_NIOS_CPU_LAN0_OFFS	0x0300		/*		offset	*/
+#define	CONFIG_SYS_NIOS_CPU_LAN0_IRQ	30		/*		IRQ	*/
+#define	CONFIG_SYS_NIOS_CPU_LAN0_BUSW	32		/*	        buswidth*/
+#define	CONFIG_SYS_NIOS_CPU_LAN0_TYPE	0		/*	smc91111(0)	*/
 						/*	cs8900(1)	*/
 						/* ex:	alteramac(2)	*/
 
 /* symbolic redefinition (undef, if not present) */
-#define	CFG_NIOS_CPU_USER_TIMER		0	/* TIMER0: users choice	*/
-#define	CFG_NIOS_CPU_TICK_TIMER		1	/* TIMER1: tick (needed)*/
+#define	CONFIG_SYS_NIOS_CPU_USER_TIMER		0	/* TIMER0: users choice	*/
+#define	CONFIG_SYS_NIOS_CPU_TICK_TIMER		1	/* TIMER1: tick (needed)*/
 
-#define	CFG_NIOS_CPU_BUTTON_PIO		0	/* PIO0: buttons	*/
-#define	CFG_NIOS_CPU_LCD_PIO		1	/* PIO1: ASCII LCD	*/
-#define	CFG_NIOS_CPU_LED_PIO		2	/* PIO2: LED bar	*/
-#define	CFG_NIOS_CPU_SEVENSEG_PIO	3	/* PIO3: 7-seg. display	*/
-#define	CFG_NIOS_CPU_RECONF_PIO		4	/* PIO4: reconf pin	*/
-#define	CFG_NIOS_CPU_CFPRESENT_PIO	5	/* PIO5: CF present IRQ	*/
-#define	CFG_NIOS_CPU_CFPOWER_PIO	6	/* PIO6: CF power/sw.	*/
-#define	CFG_NIOS_CPU_CFATASEL_PIO	7	/* PIO7: CF ATA select	*/
+#define	CONFIG_SYS_NIOS_CPU_BUTTON_PIO		0	/* PIO0: buttons	*/
+#define	CONFIG_SYS_NIOS_CPU_LCD_PIO		1	/* PIO1: ASCII LCD	*/
+#define	CONFIG_SYS_NIOS_CPU_LED_PIO		2	/* PIO2: LED bar	*/
+#define	CONFIG_SYS_NIOS_CPU_SEVENSEG_PIO	3	/* PIO3: 7-seg. display	*/
+#define	CONFIG_SYS_NIOS_CPU_RECONF_PIO		4	/* PIO4: reconf pin	*/
+#define	CONFIG_SYS_NIOS_CPU_CFPRESENT_PIO	5	/* PIO5: CF present IRQ	*/
+#define	CONFIG_SYS_NIOS_CPU_CFPOWER_PIO	6	/* PIO6: CF power/sw.	*/
+#define	CONFIG_SYS_NIOS_CPU_CFATASEL_PIO	7	/* PIO7: CF ATA select	*/
 
 #endif	/* __CONFIG_DK1S10_STANDARD_32_H */
diff --git a/include/configs/DP405.h b/include/configs/DP405.h
index 912fb2af1..884f3fe88 100644
--- a/include/configs/DP405.h
+++ b/include/configs/DP405.h
@@ -50,8 +50,9 @@
 
 #define CONFIG_PREBOOT                  /* enable preboot variable      */
 
-#define CFG_LOADS_BAUD_CHANGE	1	/* allow baudrate change	*/
+#define CONFIG_SYS_LOADS_BAUD_CHANGE	1	/* allow baudrate change	*/
 
+#define CONFIG_PPC4xx_EMAC
 #define CONFIG_MII		1	/* MII PHY management		*/
 #define CONFIG_PHY_ADDR		0	/* PHY address			*/
 
@@ -82,7 +83,7 @@
 #undef	CONFIG_WATCHDOG			/* watchdog disabled		*/
 
 #define CONFIG_RTC_MC146818		/* DS1685 is MC146818 compatible*/
-#define CFG_RTC_REG_BASE_ADDR	 0xF0000500 /* RTC Base Address		*/
+#define CONFIG_SYS_RTC_REG_BASE_ADDR	 0xF0000500 /* RTC Base Address		*/
 
 #define CONFIG_SDRAM_BANK0	1	/* init onboard SDRAM bank 0	*/
 
@@ -91,50 +92,50 @@
 /*
  * Miscellaneous configurable options
  */
-#define CFG_LONGHELP			/* undef to save memory		*/
-#define CFG_PROMPT	"=> "		/* Monitor Command Prompt	*/
+#define CONFIG_SYS_LONGHELP			/* undef to save memory		*/
+#define CONFIG_SYS_PROMPT	"=> "		/* Monitor Command Prompt	*/
 
-#undef	CFG_HUSH_PARSER			/* use "hush" command parser	*/
-#ifdef	CFG_HUSH_PARSER
-#define CFG_PROMPT_HUSH_PS2	"> "
+#undef	CONFIG_SYS_HUSH_PARSER			/* use "hush" command parser	*/
+#ifdef	CONFIG_SYS_HUSH_PARSER
+#define CONFIG_SYS_PROMPT_HUSH_PS2	"> "
 #endif
 
 #if defined(CONFIG_CMD_KGDB)
-#define CFG_CBSIZE	1024		/* Console I/O Buffer Size	*/
+#define CONFIG_SYS_CBSIZE	1024		/* Console I/O Buffer Size	*/
 #else
-#define CFG_CBSIZE	256		/* Console I/O Buffer Size	*/
+#define CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size	*/
 #endif
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define CFG_MAXARGS	16		/* max number of command args	*/
-#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS	16		/* max number of command args	*/
+#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
 
-#define CFG_DEVICE_NULLDEV	1	/* include nulldev device	*/
+#define CONFIG_SYS_DEVICE_NULLDEV	1	/* include nulldev device	*/
 
-#define CFG_CONSOLE_INFO_QUIET	1	/* don't print console @ startup*/
+#define CONFIG_SYS_CONSOLE_INFO_QUIET	1	/* don't print console @ startup*/
 
-#define CFG_MEMTEST_START	0x0400000	/* memtest works on	*/
-#define CFG_MEMTEST_END		0x0C00000	/* 4 ... 12 MB in DRAM	*/
+#define CONFIG_SYS_MEMTEST_START	0x0400000	/* memtest works on	*/
+#define CONFIG_SYS_MEMTEST_END		0x0C00000	/* 4 ... 12 MB in DRAM	*/
 
-#undef	CFG_EXT_SERIAL_CLOCK	       /* no external serial clock used */
-#define CFG_IGNORE_405_UART_ERRATA_59	/* ignore ppc405gp errata #59	*/
-#define CFG_BASE_BAUD	    691200
+#undef	CONFIG_SYS_EXT_SERIAL_CLOCK	       /* no external serial clock used */
+#define CONFIG_SYS_IGNORE_405_UART_ERRATA_59	/* ignore ppc405gp errata #59	*/
+#define CONFIG_SYS_BASE_BAUD	    691200
 #undef	CONFIG_UART1_CONSOLE		/* define for uart1 as console	*/
 
 /* The following table includes the supported baudrates */
-#define CFG_BAUDRATE_TABLE	\
+#define CONFIG_SYS_BAUDRATE_TABLE	\
 	{ 300, 600, 1200, 2400, 4800, 9600, 19200, 38400,     \
 	 57600, 115200, 230400, 460800, 921600 }
 
-#define CFG_LOAD_ADDR	0x100000	/* default load address */
-#define CFG_EXTBDINFO	1		/* To use extended board_into (bd_t) */
+#define CONFIG_SYS_LOAD_ADDR	0x100000	/* default load address */
+#define CONFIG_SYS_EXTBDINFO	1		/* To use extended board_into (bd_t) */
 
-#define CFG_HZ		1000		/* decrementer freq: 1 ms ticks */
+#define CONFIG_SYS_HZ		1000		/* decrementer freq: 1 ms ticks */
 
 #define CONFIG_ZERO_BOOTDELAY_CHECK	/* check for keypress on bootdelay==0 */
 
 #define CONFIG_VERSION_VARIABLE 1	/* include version env variable */
 
-#define CFG_RX_ETH_BUFFER	16	/* use 16 rx buffer on 405 emac */
+#define CONFIG_SYS_RX_ETH_BUFFER	16	/* use 16 rx buffer on 405 emac */
 
 /*-----------------------------------------------------------------------
  * PCI stuff
@@ -151,95 +152,94 @@
 
 #undef	CONFIG_PCI_SCAN_SHOW		/* print pci devices @ startup	*/
 
-#define CFG_PCI_SUBSYS_VENDORID 0x12FE	/* PCI Vendor ID: esd gmbh	*/
-#define CFG_PCI_SUBSYS_DEVICEID 0x0405	/* PCI Device ID: CPCI-405	*/
-#define CFG_PCI_CLASSCODE	0x0b20	/* PCI Class Code: Processor/PPC*/
-#define CFG_PCI_PTM1LA	0x00000000	/* point to sdram		*/
-#define CFG_PCI_PTM1MS	0xfc000001	/* 64MB, enable hard-wired to 1 */
-#define CFG_PCI_PTM1PCI 0x00000000	/* Host: use this pci address	*/
-#define CFG_PCI_PTM2LA	0xffc00000	/* point to flash		*/
-#define CFG_PCI_PTM2MS	0xffc00001	/* 4MB, enable			*/
-#define CFG_PCI_PTM2PCI 0x04000000	/* Host: use this pci address	*/
+#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x12FE	/* PCI Vendor ID: esd gmbh	*/
+#define CONFIG_SYS_PCI_SUBSYS_DEVICEID 0x0405	/* PCI Device ID: CPCI-405	*/
+#define CONFIG_SYS_PCI_CLASSCODE	0x0b20	/* PCI Class Code: Processor/PPC*/
+#define CONFIG_SYS_PCI_PTM1LA	0x00000000	/* point to sdram		*/
+#define CONFIG_SYS_PCI_PTM1MS	0xfc000001	/* 64MB, enable hard-wired to 1 */
+#define CONFIG_SYS_PCI_PTM1PCI 0x00000000	/* Host: use this pci address	*/
+#define CONFIG_SYS_PCI_PTM2LA	0xffc00000	/* point to flash		*/
+#define CONFIG_SYS_PCI_PTM2MS	0xffc00001	/* 4MB, enable			*/
+#define CONFIG_SYS_PCI_PTM2PCI 0x04000000	/* Host: use this pci address	*/
 
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
+#define CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
 /*-----------------------------------------------------------------------
  * FLASH organization
  */
 #define FLASH_BASE0_PRELIM	0xFFC00000	/* FLASH bank #0	*/
 
-#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
-#define CFG_MAX_FLASH_SECT	256	/* max number of sectors on one chip	*/
+#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
+#define CONFIG_SYS_MAX_FLASH_SECT	256	/* max number of sectors on one chip	*/
 
-#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
-#define CFG_FLASH_WRITE_TOUT	1000	/* Timeout for Flash Write (in ms)	*/
+#define CONFIG_SYS_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
+#define CONFIG_SYS_FLASH_WRITE_TOUT	1000	/* Timeout for Flash Write (in ms)	*/
 
-#define CFG_FLASH_WORD_SIZE	unsigned short	/* flash word size (width)	*/
-#define CFG_FLASH_ADDR0		0x5555	/* 1st address for flash config cycles	*/
-#define CFG_FLASH_ADDR1		0x2AAA	/* 2nd address for flash config cycles	*/
+#define CONFIG_SYS_FLASH_WORD_SIZE	unsigned short	/* flash word size (width)	*/
+#define CONFIG_SYS_FLASH_ADDR0		0x5555	/* 1st address for flash config cycles	*/
+#define CONFIG_SYS_FLASH_ADDR1		0x2AAA	/* 2nd address for flash config cycles	*/
 /*
  * The following defines are added for buggy IOP480 byte interface.
  * All other boards should use the standard values (CPCI405 etc.)
  */
-#define CFG_FLASH_READ0		0x0000	/* 0 is standard			*/
-#define CFG_FLASH_READ1		0x0001	/* 1 is standard			*/
-#define CFG_FLASH_READ2		0x0002	/* 2 is standard			*/
+#define CONFIG_SYS_FLASH_READ0		0x0000	/* 0 is standard			*/
+#define CONFIG_SYS_FLASH_READ1		0x0001	/* 1 is standard			*/
+#define CONFIG_SYS_FLASH_READ2		0x0002	/* 2 is standard			*/
 
-#define CFG_FLASH_EMPTY_INFO		/* print 'E' for empty sector on flinfo */
+#define CONFIG_SYS_FLASH_EMPTY_INFO		/* print 'E' for empty sector on flinfo */
 
 #if 0 /* test-only */
-#define CFG_JFFS2_FIRST_BANK	0	    /* use for JFFS2 */
-#define CFG_JFFS2_NUM_BANKS	1	    /* ! second bank contains U-Boot */
+#define CONFIG_SYS_JFFS2_FIRST_BANK	0	    /* use for JFFS2 */
+#define CONFIG_SYS_JFFS2_NUM_BANKS	1	    /* ! second bank contains U-Boot */
 #endif
 
 /*-----------------------------------------------------------------------
  * Start addresses for the final memory configuration
  * (Set up by the startup code)
- * Please note that CFG_SDRAM_BASE _must_ start at 0
+ * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
  */
-#define CFG_SDRAM_BASE		0x00000000
-#define CFG_FLASH_BASE		0xFFFC0000
-#define CFG_MONITOR_BASE	TEXT_BASE
-#define CFG_MONITOR_LEN		(256 * 1024)	/* Reserve 256 kB for Monitor	*/
-#define CFG_MALLOC_LEN		(256 * 1024)	/* Reserve 256 kB for malloc()	*/
-
-#if (CFG_MONITOR_BASE < FLASH_BASE0_PRELIM)
-# define CFG_RAMBOOT		1
+#define CONFIG_SYS_SDRAM_BASE		0x00000000
+#define CONFIG_SYS_FLASH_BASE		0xFFFC0000
+#define CONFIG_SYS_MONITOR_BASE	TEXT_BASE
+#define CONFIG_SYS_MONITOR_LEN		(256 * 1024)	/* Reserve 256 kB for Monitor	*/
+#define CONFIG_SYS_MALLOC_LEN		(256 * 1024)	/* Reserve 256 kB for malloc()	*/
+
+#if (CONFIG_SYS_MONITOR_BASE < FLASH_BASE0_PRELIM)
+# define CONFIG_SYS_RAMBOOT		1
 #else
-# undef CFG_RAMBOOT
+# undef CONFIG_SYS_RAMBOOT
 #endif
 
 /*-----------------------------------------------------------------------
  * Environment Variable setup
  */
-#define CFG_ENV_IS_IN_EEPROM	1	/* use EEPROM for environment vars */
-#define CFG_ENV_OFFSET		0x100	/* environment starts at the beginning of the EEPROM */
-#define CFG_ENV_SIZE		0x700	/* 2048 bytes may be used for env vars*/
+#define CONFIG_ENV_IS_IN_EEPROM	1	/* use EEPROM for environment vars */
+#define CONFIG_ENV_OFFSET		0x100	/* environment starts at the beginning of the EEPROM */
+#define CONFIG_ENV_SIZE		0x700	/* 2048 bytes may be used for env vars*/
 				   /* total size of a CAT24WC16 is 2048 bytes */
 
-#define CFG_NVRAM_BASE_ADDR	0xF0000500		/* NVRAM base address	*/
-#define CFG_NVRAM_SIZE		242			/* NVRAM size		*/
+#define CONFIG_SYS_NVRAM_BASE_ADDR	0xF0000500		/* NVRAM base address	*/
+#define CONFIG_SYS_NVRAM_SIZE		242			/* NVRAM size		*/
 
 /*-----------------------------------------------------------------------
  * I2C EEPROM (CAT24WC16) for environment
  */
 #define CONFIG_HARD_I2C			/* I2c with hardware support */
-#define CFG_I2C_SPEED		400000	/* I2C speed and slave address */
-#define CFG_I2C_SLAVE		0x7F
+#define CONFIG_SYS_I2C_SPEED		400000	/* I2C speed and slave address */
+#define CONFIG_SYS_I2C_SLAVE		0x7F
 
-#define CFG_I2C_EEPROM_ADDR	0x50	/* EEPROM CAT28WC08		*/
-#define CFG_I2C_EEPROM_ADDR_LEN 1	/* Bytes of address		*/
+#define CONFIG_SYS_I2C_EEPROM_ADDR	0x50	/* EEPROM CAT28WC08		*/
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1	/* Bytes of address		*/
 /* mask of address bits that overflow into the "EEPROM chip address"	*/
-#define CFG_I2C_EEPROM_ADDR_OVERFLOW	0x07
-#define CFG_EEPROM_PAGE_WRITE_BITS 4	/* The Catalyst CAT24WC08 has	*/
+#define CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW	0x07
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 4	/* The Catalyst CAT24WC08 has	*/
 					/* 16 byte page write mode using*/
 					/* last 4 bits of the address	*/
-#define CFG_EEPROM_PAGE_WRITE_DELAY_MS	10   /* and takes up to 10 msec */
-#define CFG_EEPROM_PAGE_WRITE_ENABLE
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	10   /* and takes up to 10 msec */
 
 /*-----------------------------------------------------------------------
  * External Bus Controller (EBC) Setup
@@ -249,47 +249,47 @@
 #define RTC_BA		0xF0000500	    /* RTC Base Address			*/
 
 /* Memory Bank 0 (Flash Bank 0, NOR-FLASH) initialization			*/
-#define CFG_EBC_PB0AP		0x92015480
-#define CFG_EBC_PB0CR		0xFFC5A000  /* BAS=0xFFC,BS=4MB,BU=R/W,BW=16bit */
+#define CONFIG_SYS_EBC_PB0AP		0x92015480
+#define CONFIG_SYS_EBC_PB0CR		0xFFC5A000  /* BAS=0xFFC,BS=4MB,BU=R/W,BW=16bit */
 
 #if 0 /* test-only */
 /* Memory Bank 1 (Flash Bank 1, NAND-FLASH) initialization			*/
-#define CFG_EBC_PB1AP		0x92015480
-#define CFG_EBC_PB1CR		0xF4018000  /* BAS=0xF40,BS=1MB,BU=R/W,BW=8bit	*/
+#define CONFIG_SYS_EBC_PB1AP		0x92015480
+#define CONFIG_SYS_EBC_PB1CR		0xF4018000  /* BAS=0xF40,BS=1MB,BU=R/W,BW=8bit	*/
 #endif
 
 /* Memory Bank 2 (8 Bit Peripheral: CAN, UART, RTC) initialization		*/
-#define CFG_EBC_PB2AP		0x010053C0  /* BWT=2,WBN=1,WBF=1,TH=1,RE=1,SOR=1,BEM=1 */
-#define CFG_EBC_PB2CR		0xF0018000  /* BAS=0xF00,BS=1MB,BU=R/W,BW=8bit	*/
+#define CONFIG_SYS_EBC_PB2AP		0x010053C0  /* BWT=2,WBN=1,WBF=1,TH=1,RE=1,SOR=1,BEM=1 */
+#define CONFIG_SYS_EBC_PB2CR		0xF0018000  /* BAS=0xF00,BS=1MB,BU=R/W,BW=8bit	*/
 
 /*-----------------------------------------------------------------------
  * FPGA stuff
  */
-#define CFG_FPGA_XC95XL		1	    /* using Xilinx XC95XL CPLD	     */
-#define CFG_FPGA_MAX_SIZE	32*1024	    /* 32kByte is enough for CPLD    */
+#define CONFIG_SYS_FPGA_XC95XL		1	    /* using Xilinx XC95XL CPLD	     */
+#define CONFIG_SYS_FPGA_MAX_SIZE	32*1024	    /* 32kByte is enough for CPLD    */
 
 /* FPGA program pin configuration */
-#define CFG_FPGA_PRG		0x04000000  /* JTAG TMS pin (ppc output)     */
-#define CFG_FPGA_CLK		0x02000000  /* JTAG TCK pin (ppc output)     */
-#define CFG_FPGA_DATA		0x01000000  /* JTAG TDO->TDI data pin (ppc output) */
-#define CFG_FPGA_INIT		0x00010000  /* unused (ppc input)	     */
-#define CFG_FPGA_DONE		0x00008000  /* JTAG TDI->TDO pin (ppc input) */
+#define CONFIG_SYS_FPGA_PRG		0x04000000  /* JTAG TMS pin (ppc output)     */
+#define CONFIG_SYS_FPGA_CLK		0x02000000  /* JTAG TCK pin (ppc output)     */
+#define CONFIG_SYS_FPGA_DATA		0x01000000  /* JTAG TDO->TDI data pin (ppc output) */
+#define CONFIG_SYS_FPGA_INIT		0x00010000  /* unused (ppc input)	     */
+#define CONFIG_SYS_FPGA_DONE		0x00008000  /* JTAG TDI->TDO pin (ppc input) */
 
 /*-----------------------------------------------------------------------
  * Definitions for initial stack pointer and data area (in data cache)
  */
 /* use on chip memory ( OCM ) for temperary stack until sdram is tested */
-#define CFG_TEMP_STACK_OCM	  1
+#define CONFIG_SYS_TEMP_STACK_OCM	  1
 
 /* On Chip Memory location */
-#define CFG_OCM_DATA_ADDR	0xF8000000
-#define CFG_OCM_DATA_SIZE	0x1000
-#define CFG_INIT_RAM_ADDR	CFG_OCM_DATA_ADDR /* inside of SDRAM		*/
-#define CFG_INIT_RAM_END	CFG_OCM_DATA_SIZE /* End of used area in RAM	*/
+#define CONFIG_SYS_OCM_DATA_ADDR	0xF8000000
+#define CONFIG_SYS_OCM_DATA_SIZE	0x1000
+#define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_OCM_DATA_ADDR /* inside of SDRAM		*/
+#define CONFIG_SYS_INIT_RAM_END	CONFIG_SYS_OCM_DATA_SIZE /* End of used area in RAM	*/
 
-#define CFG_GBL_DATA_SIZE      128  /* size in bytes reserved for initial data */
-#define CFG_GBL_DATA_OFFSET    (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_GBL_DATA_SIZE      128  /* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET    (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
 /*-----------------------------------------------------------------------
  * Definitions for GPIO setup (PPC405EP specific)
@@ -307,13 +307,13 @@
 /* GPIO Output:		OSR=00, ISR=00, TSR=00, TCR=1 */
 /* Alt. Funtion Input:	OSR=00, ISR=01, TSR=00, TCR=0 */
 /* Alt. Funtion Output: OSR=01, ISR=00, TSR=00, TCR=1 */
-#define CFG_GPIO0_OSRH		0x40000540  /*	0 ... 15 */
-#define CFG_GPIO0_OSRL		0x00000110  /* 16 ... 31 */
-#define CFG_GPIO0_ISR1H		0x00000000  /*	0 ... 15 */
-#define CFG_GPIO0_ISR1L		0x14000045  /* 16 ... 31 */
-#define CFG_GPIO0_TSRH		0x00000000  /*	0 ... 15 */
-#define CFG_GPIO0_TSRL		0x00000000  /* 16 ... 31 */
-#define CFG_GPIO0_TCR		0xF7FE0014  /*	0 ... 31 */
+#define CONFIG_SYS_GPIO0_OSRH		0x40000540  /*	0 ... 15 */
+#define CONFIG_SYS_GPIO0_OSRL		0x00000110  /* 16 ... 31 */
+#define CONFIG_SYS_GPIO0_ISR1H		0x00000000  /*	0 ... 15 */
+#define CONFIG_SYS_GPIO0_ISR1L		0x14000045  /* 16 ... 31 */
+#define CONFIG_SYS_GPIO0_TSRH		0x00000000  /*	0 ... 15 */
+#define CONFIG_SYS_GPIO0_TSRL		0x00000000  /* 16 ... 31 */
+#define CONFIG_SYS_GPIO0_TCR		0xF7FE0014  /*	0 ... 31 */
 
 /*
  * Internal Definitions
diff --git a/include/configs/DU405.h b/include/configs/DU405.h
index c8bf67fe9..1d20efea0 100644
--- a/include/configs/DU405.h
+++ b/include/configs/DU405.h
@@ -52,8 +52,9 @@
 #define CONFIG_PREBOOT                  /* enable preboot variable      */
 
 #define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
-#define CFG_LOADS_BAUD_CHANGE	1	/* allow baudrate change	*/
+#define CONFIG_SYS_LOADS_BAUD_CHANGE	1	/* allow baudrate change	*/
 
+#define CONFIG_PPC4xx_EMAC
 #define CONFIG_MII		1	/* MII PHY management		*/
 #define CONFIG_PHY_ADDR		0	/* PHY address			*/
 #define CONFIG_LXT971_NO_SLEEP  1       /* disable sleep mode in LXT971 */
@@ -88,44 +89,44 @@
 #undef CONFIG_WATCHDOG			/* watchdog disabled		*/
 
 #define CONFIG_RTC_MC146818		/* BQ3285 is MC146818 compatible*/
-#define CFG_RTC_REG_BASE_ADDR	 0xF0000080 /* RTC Base Address		*/
+#define CONFIG_SYS_RTC_REG_BASE_ADDR	 0xF0000080 /* RTC Base Address		*/
 
 #define CONFIG_SDRAM_BANK0	1	/* init onboard SDRAM bank 0	*/
 
 /*
  * Miscellaneous configurable options
  */
-#define CFG_LONGHELP			/* undef to save memory		*/
-#define CFG_PROMPT	"=> "		/* Monitor Command Prompt	*/
+#define CONFIG_SYS_LONGHELP			/* undef to save memory		*/
+#define CONFIG_SYS_PROMPT	"=> "		/* Monitor Command Prompt	*/
 #if defined(CONFIG_CMD_KGDB)
-#define CFG_CBSIZE	1024		/* Console I/O Buffer Size	*/
+#define CONFIG_SYS_CBSIZE	1024		/* Console I/O Buffer Size	*/
 #else
-#define CFG_CBSIZE	256		/* Console I/O Buffer Size	*/
+#define CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size	*/
 #endif
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define CFG_MAXARGS	16		/* max number of command args	*/
-#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS	16		/* max number of command args	*/
+#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
 
-#define CFG_CONSOLE_INFO_QUIET	1	/* don't print console @ startup*/
+#define CONFIG_SYS_CONSOLE_INFO_QUIET	1	/* don't print console @ startup*/
 
-#define CFG_MEMTEST_START	0x0400000	/* memtest works on	*/
-#define CFG_MEMTEST_END		0x0C00000	/* 4 ... 12 MB in DRAM	*/
+#define CONFIG_SYS_MEMTEST_START	0x0400000	/* memtest works on	*/
+#define CONFIG_SYS_MEMTEST_END		0x0C00000	/* 4 ... 12 MB in DRAM	*/
 
-#define CFG_EXT_SERIAL_CLOCK	11059200  /* use external serial clock	*/
+#define CONFIG_SYS_EXT_SERIAL_CLOCK	11059200  /* use external serial clock	*/
 
 /* The following table includes the supported baudrates */
-#define CFG_BAUDRATE_TABLE	\
+#define CONFIG_SYS_BAUDRATE_TABLE	\
 	{ 300, 600, 1200, 2400, 4800, 9600, 19200, 38400,     \
 	 57600, 115200, 230400, 460800, 921600 }
 
-#define CFG_LOAD_ADDR	0x100000	/* default load address */
-#define CFG_EXTBDINFO	1		/* To use extended board_into (bd_t) */
+#define CONFIG_SYS_LOAD_ADDR	0x100000	/* default load address */
+#define CONFIG_SYS_EXTBDINFO	1		/* To use extended board_into (bd_t) */
 
-#define CFG_HZ		1000		/* decrementer freq: 1 ms ticks */
+#define CONFIG_SYS_HZ		1000		/* decrementer freq: 1 ms ticks */
 
 #define CONFIG_ZERO_BOOTDELAY_CHECK	/* check for keypress on bootdelay==0 */
 
-#define CFG_RX_ETH_BUFFER	16	/* use 16 rx buffer on 405 emac */
+#define CONFIG_SYS_RX_ETH_BUFFER	16	/* use 16 rx buffer on 405 emac */
 
 /*-----------------------------------------------------------------------
  * PCI stuff
@@ -144,14 +145,14 @@
 
 #define CONFIG_PCI_BOOTDELAY	0	/* enable pci bootdelay variable*/
 
-#define CFG_PCI_SUBSYS_VENDORID 0x12FE	/* PCI Vendor ID: esd gmbh	*/
-#define CFG_PCI_SUBSYS_DEVICEID 0x0404	/* PCI Device ID: CPCI-ISER4	*/
-#define CFG_PCI_PTM1LA	0x00000000	/* point to sdram		*/
-#define CFG_PCI_PTM1MS	0xff000001	/* 16MB, enable hard-wired to 1 */
-#define CFG_PCI_PTM1PCI 0x00000000	/* Host: use this pci address	*/
-#define CFG_PCI_PTM2LA	0xffe00000	/* point to flash		*/
-#define CFG_PCI_PTM2MS	0xffe00001	/* 2MB, enable			*/
-#define CFG_PCI_PTM2PCI 0x04000000	/* Host: use this pci address	*/
+#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x12FE	/* PCI Vendor ID: esd gmbh	*/
+#define CONFIG_SYS_PCI_SUBSYS_DEVICEID 0x0404	/* PCI Device ID: CPCI-ISER4	*/
+#define CONFIG_SYS_PCI_PTM1LA	0x00000000	/* point to sdram		*/
+#define CONFIG_SYS_PCI_PTM1MS	0xff000001	/* 16MB, enable hard-wired to 1 */
+#define CONFIG_SYS_PCI_PTM1PCI 0x00000000	/* Host: use this pci address	*/
+#define CONFIG_SYS_PCI_PTM2LA	0xffe00000	/* point to flash		*/
+#define CONFIG_SYS_PCI_PTM2MS	0xffe00001	/* 2MB, enable			*/
+#define CONFIG_SYS_PCI_PTM2PCI 0x04000000	/* Host: use this pci address	*/
 
 /*-----------------------------------------------------------------------
  * IDE/ATA stuff
@@ -161,75 +162,74 @@
 #undef	CONFIG_IDE_LED			/* no led for ide supported	*/
 #undef	CONFIG_IDE_RESET		/* no reset for ide supported	*/
 
-#define CFG_IDE_MAXBUS		1		/* max. 1 IDE busses	*/
-#define CFG_IDE_MAXDEVICE	(CFG_IDE_MAXBUS*1) /* max. 1 drives per IDE bus */
+#define CONFIG_SYS_IDE_MAXBUS		1		/* max. 1 IDE busses	*/
+#define CONFIG_SYS_IDE_MAXDEVICE	(CONFIG_SYS_IDE_MAXBUS*1) /* max. 1 drives per IDE bus */
 
-#define CFG_ATA_BASE_ADDR	0xF0100000
-#define CFG_ATA_IDE0_OFFSET	0x0000
+#define CONFIG_SYS_ATA_BASE_ADDR	0xF0100000
+#define CONFIG_SYS_ATA_IDE0_OFFSET	0x0000
 
-#define CFG_ATA_DATA_OFFSET	0x0000	/* Offset for data I/O			*/
-#define CFG_ATA_REG_OFFSET	0x0000	/* Offset for normal register accesses	*/
-#define CFG_ATA_ALT_OFFSET	0x0000	/* Offset for alternate registers	*/
+#define CONFIG_SYS_ATA_DATA_OFFSET	0x0000	/* Offset for data I/O			*/
+#define CONFIG_SYS_ATA_REG_OFFSET	0x0000	/* Offset for normal register accesses	*/
+#define CONFIG_SYS_ATA_ALT_OFFSET	0x0000	/* Offset for alternate registers	*/
 
 /*-----------------------------------------------------------------------
  * Start addresses for the final memory configuration
  * (Set up by the startup code)
- * Please note that CFG_SDRAM_BASE _must_ start at 0
+ * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
  */
-#define CFG_SDRAM_BASE		0x00000000
-#define CFG_FLASH_BASE		0xFFFD0000
-#define CFG_MONITOR_BASE	CFG_FLASH_BASE
-#define CFG_MONITOR_LEN		(192 * 1024)	/* Reserve 192 kB for Monitor	*/
-#define CFG_MALLOC_LEN		(128 * 1024)	/* Reserve 128 kB for malloc()	*/
+#define CONFIG_SYS_SDRAM_BASE		0x00000000
+#define CONFIG_SYS_FLASH_BASE		0xFFFD0000
+#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_FLASH_BASE
+#define CONFIG_SYS_MONITOR_LEN		(192 * 1024)	/* Reserve 192 kB for Monitor	*/
+#define CONFIG_SYS_MALLOC_LEN		(128 * 1024)	/* Reserve 128 kB for malloc()	*/
 
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
+#define CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
 /*-----------------------------------------------------------------------
  * FLASH organization
  */
-#define CFG_MAX_FLASH_BANKS	2	/* max number of memory banks		*/
-#define CFG_MAX_FLASH_SECT	256	/* max number of sectors on one chip	*/
+#define CONFIG_SYS_MAX_FLASH_BANKS	2	/* max number of memory banks		*/
+#define CONFIG_SYS_MAX_FLASH_SECT	256	/* max number of sectors on one chip	*/
 
-#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
-#define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
+#define CONFIG_SYS_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
+#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
 
-#define CFG_FLASH_WORD_SIZE	unsigned short	/* flash word size (width)	*/
-#define CFG_FLASH_ADDR0		0x5555	/* 1st address for flash config cycles	*/
-#define CFG_FLASH_ADDR1		0x2AAA	/* 2nd address for flash config cycles	*/
+#define CONFIG_SYS_FLASH_WORD_SIZE	unsigned short	/* flash word size (width)	*/
+#define CONFIG_SYS_FLASH_ADDR0		0x5555	/* 1st address for flash config cycles	*/
+#define CONFIG_SYS_FLASH_ADDR1		0x2AAA	/* 2nd address for flash config cycles	*/
 /*
  * The following defines are added for buggy IOP480 byte interface.
  * All other boards should use the standard values (CPCI405 etc.)
  */
-#define CFG_FLASH_READ0		0x0000	/* 0 is standard			*/
-#define CFG_FLASH_READ1		0x0001	/* 1 is standard			*/
-#define CFG_FLASH_READ2		0x0002	/* 2 is standard			*/
+#define CONFIG_SYS_FLASH_READ0		0x0000	/* 0 is standard			*/
+#define CONFIG_SYS_FLASH_READ1		0x0001	/* 1 is standard			*/
+#define CONFIG_SYS_FLASH_READ2		0x0002	/* 2 is standard			*/
 
-#define CFG_FLASH_EMPTY_INFO		/* print 'E' for empty sector on flinfo */
+#define CONFIG_SYS_FLASH_EMPTY_INFO		/* print 'E' for empty sector on flinfo */
 
 /*-----------------------------------------------------------------------
  * I2C EEPROM (CAT24WC08) for environment
  */
 #define CONFIG_HARD_I2C			/* I2c with hardware support */
-#define CFG_I2C_SPEED		400000	/* I2C speed and slave address */
-#define CFG_I2C_SLAVE		0x7F
+#define CONFIG_SYS_I2C_SPEED		400000	/* I2C speed and slave address */
+#define CONFIG_SYS_I2C_SLAVE		0x7F
 
-#define CFG_I2C_EEPROM_ADDR	0x50	/* EEPROM CAT28WC08		*/
-#define CFG_I2C_EEPROM_ADDR_LEN 1	/* Bytes of address		*/
+#define CONFIG_SYS_I2C_EEPROM_ADDR	0x50	/* EEPROM CAT28WC08		*/
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1	/* Bytes of address		*/
 /* mask of address bits that overflow into the "EEPROM chip address"	*/
-#define CFG_I2C_EEPROM_ADDR_OVERFLOW	0x07
-#define CFG_EEPROM_PAGE_WRITE_BITS 4	/* The Catalyst CAT24WC08 has	*/
+#define CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW	0x07
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 4	/* The Catalyst CAT24WC08 has	*/
 					/* 16 byte page write mode using*/
 					/* last 4 bits of the address	*/
-#define CFG_EEPROM_PAGE_WRITE_DELAY_MS	10   /* and takes up to 10 msec */
-#define CFG_EEPROM_PAGE_WRITE_ENABLE
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	10   /* and takes up to 10 msec */
 
-#define CFG_ENV_IS_IN_EEPROM	1	/* use EEPROM for environment vars */
-#define CFG_ENV_OFFSET		0x000	/* environment starts at the beginning of the EEPROM */
-#define CFG_ENV_SIZE		0x400	/* 1024 bytes may be used for env vars */
+#define CONFIG_ENV_IS_IN_EEPROM	1	/* use EEPROM for environment vars */
+#define CONFIG_ENV_OFFSET		0x000	/* environment starts at the beginning of the EEPROM */
+#define CONFIG_ENV_SIZE		0x400	/* 1024 bytes may be used for env vars */
 				   /* total size of a CAT24WC08 is 1024 bytes */
 
 /*
@@ -257,36 +257,36 @@
 #define FPGA_MODE_REG	(DUART_BA+0x80)	    /* FPGA Mode Register		*/
 
 /* Memory Bank 0 (Flash Bank 0) initialization					*/
-#define CFG_EBC_PB0AP	0x92015480
-#define CFG_EBC_PB0CR	FLASH0_BA | 0x5A000 /* BAS=0xFFC,BS=4MB,BU=R/W,BW=16bit */
+#define CONFIG_SYS_EBC_PB0AP	0x92015480
+#define CONFIG_SYS_EBC_PB0CR	FLASH0_BA | 0x5A000 /* BAS=0xFFC,BS=4MB,BU=R/W,BW=16bit */
 
 /* Memory Bank 1 (Flash Bank 1) initialization					*/
-#define CFG_EBC_PB1AP	0x92015480
-#define CFG_EBC_PB1CR	FLASH1_BA | 0x5A000 /* BAS=0xFF8,BS=4MB,BU=R/W,BW=16bit */
+#define CONFIG_SYS_EBC_PB1AP	0x92015480
+#define CONFIG_SYS_EBC_PB1CR	FLASH1_BA | 0x5A000 /* BAS=0xFF8,BS=4MB,BU=R/W,BW=16bit */
 
 /* Memory Bank 2 (CAN0) initialization						*/
-#define CFG_EBC_PB2AP	0x010053C0   /* BWT=2,WBN=1,WBF=1,TH=1,RE=1,SOR=1,BEM=1 */
-#define CFG_EBC_PB2CR	CAN_BA | 0x18000    /* BAS=0xF00,BS=1MB,BU=R/W,BW=8bit	*/
+#define CONFIG_SYS_EBC_PB2AP	0x010053C0   /* BWT=2,WBN=1,WBF=1,TH=1,RE=1,SOR=1,BEM=1 */
+#define CONFIG_SYS_EBC_PB2CR	CAN_BA | 0x18000    /* BAS=0xF00,BS=1MB,BU=R/W,BW=8bit	*/
 
 /* Memory Bank 3 (DUART) initialization						*/
-#define CFG_EBC_PB3AP	0x010053C0   /* BWT=2,WBN=1,WBF=1,TH=1,RE=1,SOR=1,BEM=1 */
-#define CFG_EBC_PB3CR	DUART_BA | 0x18000  /* BAS=0xF03,BS=1MB,BU=R/W,BW=8bit	*/
+#define CONFIG_SYS_EBC_PB3AP	0x010053C0   /* BWT=2,WBN=1,WBF=1,TH=1,RE=1,SOR=1,BEM=1 */
+#define CONFIG_SYS_EBC_PB3CR	DUART_BA | 0x18000  /* BAS=0xF03,BS=1MB,BU=R/W,BW=8bit	*/
 
 /* Memory Bank 4 (CompactFlash IDE) initialization				*/
-#define CFG_EBC_PB4AP	0x010053C0   /* BWT=2,WBN=1,WBF=1,TH=1,RE=1,SOR=1,BEM=1 */
-#define CFG_EBC_PB4CR	CF_BA | 0x1A000	    /* BAS=0xF01,BS=1MB,BU=R/W,BW=16bit */
+#define CONFIG_SYS_EBC_PB4AP	0x010053C0   /* BWT=2,WBN=1,WBF=1,TH=1,RE=1,SOR=1,BEM=1 */
+#define CONFIG_SYS_EBC_PB4CR	CF_BA | 0x1A000	    /* BAS=0xF01,BS=1MB,BU=R/W,BW=16bit */
 
 /* Memory Bank 5 (SRAM) initialization						*/
-#define CFG_EBC_PB5AP	0x010053C0   /* BWT=2,WBN=1,WBF=1,TH=1,RE=1,SOR=1,BEM=1 */
-#define CFG_EBC_PB5CR	SRAM_BA | 0x1A000   /* BAS=0xF02,BS=1MB,BU=R/W,BW=16bit */
+#define CONFIG_SYS_EBC_PB5AP	0x010053C0   /* BWT=2,WBN=1,WBF=1,TH=1,RE=1,SOR=1,BEM=1 */
+#define CONFIG_SYS_EBC_PB5CR	SRAM_BA | 0x1A000   /* BAS=0xF02,BS=1MB,BU=R/W,BW=16bit */
 
 /* Memory Bank 6 (DURAG Bus IO Space) initialization				*/
-#define CFG_EBC_PB6AP	0x010053C0   /* BWT=2,WBN=1,WBF=1,TH=1,RE=1,SOR=1,BEM=1 */
-#define CFG_EBC_PB6CR	DURAG_IO_BA | 0x18000 /* BAS=0xF04,BS=1MB,BU=R/W,BW=8bit*/
+#define CONFIG_SYS_EBC_PB6AP	0x010053C0   /* BWT=2,WBN=1,WBF=1,TH=1,RE=1,SOR=1,BEM=1 */
+#define CONFIG_SYS_EBC_PB6CR	DURAG_IO_BA | 0x18000 /* BAS=0xF04,BS=1MB,BU=R/W,BW=8bit*/
 
 /* Memory Bank 7 (DURAG Bus Mem Space) initialization				*/
-#define CFG_EBC_PB7AP	0x010053C0   /* BWT=2,WBN=1,WBF=1,TH=1,RE=1,SOR=1,BEM=1 */
-#define CFG_EBC_PB7CR	DURAG_MEM_BA | 0x18000 /* BAS=0xF05,BS=1MB,BU=R/W,BW=8bit */
+#define CONFIG_SYS_EBC_PB7AP	0x010053C0   /* BWT=2,WBN=1,WBF=1,TH=1,RE=1,SOR=1,BEM=1 */
+#define CONFIG_SYS_EBC_PB7CR	DURAG_MEM_BA | 0x18000 /* BAS=0xF05,BS=1MB,BU=R/W,BW=8bit */
 
 
 /*-----------------------------------------------------------------------
@@ -294,17 +294,17 @@
  */
 
 /* use on chip memory ( OCM ) for temperary stack until sdram is tested */
-#define CFG_TEMP_STACK_OCM	  1
+#define CONFIG_SYS_TEMP_STACK_OCM	  1
 
 /* On Chip Memory location */
-#define CFG_OCM_DATA_ADDR	0xF8000000
-#define CFG_OCM_DATA_SIZE	0x1000
-
-#define CFG_INIT_RAM_ADDR	CFG_OCM_DATA_ADDR /* inside of SDRAM		*/
-#define CFG_INIT_RAM_END	CFG_OCM_DATA_SIZE /* End of used area in RAM	*/
-#define CFG_GBL_DATA_SIZE      128  /* size in bytes reserved for initial data */
-#define CFG_GBL_DATA_OFFSET    (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_OCM_DATA_ADDR	0xF8000000
+#define CONFIG_SYS_OCM_DATA_SIZE	0x1000
+
+#define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_OCM_DATA_ADDR /* inside of SDRAM		*/
+#define CONFIG_SYS_INIT_RAM_END	CONFIG_SYS_OCM_DATA_SIZE /* End of used area in RAM	*/
+#define CONFIG_SYS_GBL_DATA_SIZE      128  /* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET    (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
 
 /*
diff --git a/include/configs/DU440.h b/include/configs/DU440.h
index c757523ae..729153c2e 100644
--- a/include/configs/DU440.h
+++ b/include/configs/DU440.h
@@ -45,53 +45,52 @@
  * Base addresses -- Note these are effective addresses where the
  * actual resources get mapped (not physical addresses)
  */
-#define CFG_MONITOR_LEN		(384 * 1024)	/* Reserve 384 kB for Monitor */
-#define CFG_MALLOC_LEN		(8 << 20)	/* Reserve 8 MB for malloc()  */
-
-#define CFG_BOOT_BASE_ADDR	0xf0000000
-#define CFG_SDRAM_BASE		0x00000000	/* _must_ be 0		*/
-#define CFG_FLASH_BASE		0xfc000000	/* start of FLASH	*/
-#define CFG_MONITOR_BASE	TEXT_BASE
-#define CFG_NAND0_ADDR		0xd0000000      /* NAND Flash		*/
-#define CFG_NAND1_ADDR		0xd0100000      /* NAND Flash		*/
-#define CFG_OCM_BASE		0xe0010000      /* ocm			*/
-#define CFG_PCI_BASE		0xe0000000      /* Internal PCI regs	*/
-#define CFG_PCI_MEMBASE		0x80000000	/* mapped pci memory	*/
-#define CFG_PCI_MEMBASE1	CFG_PCI_MEMBASE  + 0x10000000
-#define CFG_PCI_MEMBASE2	CFG_PCI_MEMBASE1 + 0x10000000
-#define CFG_PCI_MEMBASE3	CFG_PCI_MEMBASE2 + 0x10000000
-#define CFG_PCI_IOBASE          0xe8000000
+#define CONFIG_SYS_MONITOR_LEN		(384 * 1024)	/* Reserve 384 kB for Monitor */
+#define CONFIG_SYS_MALLOC_LEN		(8 << 20)	/* Reserve 8 MB for malloc()  */
+
+#define CONFIG_SYS_BOOT_BASE_ADDR	0xf0000000
+#define CONFIG_SYS_SDRAM_BASE		0x00000000	/* _must_ be 0		*/
+#define CONFIG_SYS_FLASH_BASE		0xfc000000	/* start of FLASH	*/
+#define CONFIG_SYS_MONITOR_BASE	TEXT_BASE
+#define CONFIG_SYS_NAND0_ADDR		0xd0000000      /* NAND Flash		*/
+#define CONFIG_SYS_NAND1_ADDR		0xd0100000      /* NAND Flash		*/
+#define CONFIG_SYS_OCM_BASE		0xe0010000      /* ocm			*/
+#define CONFIG_SYS_PCI_BASE		0xe0000000      /* Internal PCI regs	*/
+#define CONFIG_SYS_PCI_MEMBASE		0x80000000	/* mapped pci memory	*/
+#define CONFIG_SYS_PCI_MEMBASE1	CONFIG_SYS_PCI_MEMBASE  + 0x10000000
+#define CONFIG_SYS_PCI_MEMBASE2	CONFIG_SYS_PCI_MEMBASE1 + 0x10000000
+#define CONFIG_SYS_PCI_MEMBASE3	CONFIG_SYS_PCI_MEMBASE2 + 0x10000000
+#define CONFIG_SYS_PCI_IOBASE          0xe8000000
 
 
 /* Don't change either of these */
-#define CFG_PERIPHERAL_BASE	0xef600000	/* internal peripherals	*/
+#define CONFIG_SYS_PERIPHERAL_BASE	0xef600000	/* internal peripherals	*/
 
-#define CFG_USB2D0_BASE		0xe0000100
-#define CFG_USB_DEVICE		0xe0000000
-#define CFG_USB_HOST		0xe0000400
+#define CONFIG_SYS_USB2D0_BASE		0xe0000100
+#define CONFIG_SYS_USB_DEVICE		0xe0000000
+#define CONFIG_SYS_USB_HOST		0xe0000400
 
 /*
  * Initial RAM & stack pointer
  */
 /* 440EPx/440GRx have 16KB of internal SRAM, so no need for D-Cache	*/
-#define CFG_INIT_RAM_OCM	1		/* OCM as init ram	*/
-#define CFG_INIT_RAM_ADDR	CFG_OCM_BASE	/* OCM			*/
+#define CONFIG_SYS_INIT_RAM_OCM	1		/* OCM as init ram	*/
+#define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_OCM_BASE	/* OCM			*/
 
-#define CFG_INIT_RAM_END	(4 << 10)
-#define CFG_GBL_DATA_SIZE	256		/* num bytes initial data */
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_INIT_RAM_END	(4 << 10)
+#define CONFIG_SYS_GBL_DATA_SIZE	256		/* num bytes initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
 /*
  * Serial Port
  */
-/* TODO: external clock oscillator will be removed */
-#define CFG_EXT_SERIAL_CLOCK	11059200	/* ext. 11.059MHz clk	*/
+#undef CONFIG_SYS_EXT_SERIAL_CLOCK
 #define CONFIG_BAUDRATE		115200
 #define CONFIG_SERIAL_MULTI     1
 #undef CONFIG_UART1_CONSOLE
 
-#define CFG_BAUDRATE_TABLE						\
+#define CONFIG_SYS_BAUDRATE_TABLE						\
 	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
 
 /*
@@ -105,59 +104,59 @@
 #define CONFIG_SPLASH_SCREEN
 #define CONFIG_SPLASH_SCREEN_ALIGN
 #define CONFIG_VIDEO_BMP_GZIP              /* gzip compressed bmp images */
-#define CFG_VIDEO_LOGO_MAX_SIZE (4 << 20)  /* for decompressed img */
-#define CFG_DEFAULT_VIDEO_MODE 0x31a       /* 1280x1024,16bpp */
-#define CFG_CONSOLE_IS_IN_ENV
-#define CFG_ISA_IO CFG_PCI_IOBASE
+#define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE (4 << 20)  /* for decompressed img */
+#define CONFIG_SYS_DEFAULT_VIDEO_MODE 0x31a       /* 1280x1024,16bpp */
+#define CONFIG_SYS_CONSOLE_IS_IN_ENV
+#define CONFIG_SYS_ISA_IO CONFIG_SYS_PCI_IOBASE
 
 /*
  * Environment
  */
-#define CFG_ENV_IS_IN_EEPROM    1	/* use FLASH for environment vars */
+#define CONFIG_ENV_IS_IN_EEPROM    1	/* use FLASH for environment vars */
 
 /*
  * FLASH related
  */
-#define CFG_FLASH_CFI			/* The flash is CFI compatible */
+#define CONFIG_SYS_FLASH_CFI			/* The flash is CFI compatible */
 #define CONFIG_FLASH_CFI_DRIVER		/* Use common CFI driver       */
 
-#define CFG_FLASH_BANKS_LIST	{ CFG_FLASH_BASE }
+#define CONFIG_SYS_FLASH_BANKS_LIST	{ CONFIG_SYS_FLASH_BASE }
 
-#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks	      */
-#define CFG_MAX_FLASH_SECT	512	/* max number of sectors on one chip  */
+#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks	      */
+#define CONFIG_SYS_MAX_FLASH_SECT	512	/* max number of sectors on one chip  */
 
-#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)    */
-#define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)    */
+#define CONFIG_SYS_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)    */
+#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)    */
 
-#define CFG_FLASH_USE_BUFFER_WRITE 1	/* use buffered writes (20x faster)   */
+#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1	/* use buffered writes (20x faster)   */
 /* CFI_FLASH_PROTECTION make flash_protect hang sometimes -> disabled */
-#define CFG_FLASH_PROTECTION	1	/* use hardware flash protection      */
+#define CONFIG_SYS_FLASH_PROTECTION	1	/* use hardware flash protection      */
 
-#define CFG_FLASH_EMPTY_INFO
-#define CFG_FLASH_QUIET_TEST	1	/* don't warn upon unknown flash      */
+#define CONFIG_SYS_FLASH_EMPTY_INFO
+#define CONFIG_SYS_FLASH_QUIET_TEST	1	/* don't warn upon unknown flash      */
 
-#ifdef CFG_ENV_IS_IN_FLASH
-#define CFG_ENV_SECT_SIZE	0x20000 /* size of one complete sector        */
-#define CFG_ENV_ADDR		((-CFG_MONITOR_LEN)-CFG_ENV_SECT_SIZE)
-#define	CFG_ENV_SIZE		0x2000	/* Total Size of Environment Sector   */
+#ifdef CONFIG_ENV_IS_IN_FLASH
+#define CONFIG_ENV_SECT_SIZE	0x20000 /* size of one complete sector        */
+#define CONFIG_ENV_ADDR		((-CONFIG_SYS_MONITOR_LEN)-CONFIG_ENV_SECT_SIZE)
+#define	CONFIG_ENV_SIZE		0x2000	/* Total Size of Environment Sector   */
 
 /* Address and size of Redundant Environment Sector	*/
-#define CFG_ENV_ADDR_REDUND	(CFG_ENV_ADDR-CFG_ENV_SECT_SIZE)
-#define CFG_ENV_SIZE_REDUND	(CFG_ENV_SIZE)
+#define CONFIG_ENV_ADDR_REDUND	(CONFIG_ENV_ADDR-CONFIG_ENV_SECT_SIZE)
+#define CONFIG_ENV_SIZE_REDUND	(CONFIG_ENV_SIZE)
 #endif
 
-#ifdef CFG_ENV_IS_IN_EEPROM
-#define CFG_ENV_OFFSET		0	/* environment starts at */
+#ifdef CONFIG_ENV_IS_IN_EEPROM
+#define CONFIG_ENV_OFFSET		0	/* environment starts at */
 					/* the beginning of the EEPROM */
-#define CFG_ENV_SIZE		0x1000 /* 4096 bytes may be used for env vars */
+#define CONFIG_ENV_SIZE		0x1000 /* 4096 bytes may be used for env vars */
 #endif
 
 /*
  * DDR SDRAM
  */
-#define CFG_MBYTES_SDRAM        (1024)	/* 512 MiB      TODO: remove    */
+#define CONFIG_SYS_MBYTES_SDRAM        (1024)	/* 512 MiB      TODO: remove    */
 #define CONFIG_DDR_DATA_EYE		/* use DDR2 optimization        */
-#define CFG_MEM_TOP_HIDE        (4 << 10) /* don't use last 4kbytes     */
+#define CONFIG_SYS_MEM_TOP_HIDE        (4 << 10) /* don't use last 4kbytes     */
 					/* 440EPx errata CHIP 11        */
 #define CONFIG_SPD_EEPROM		/* Use SPD EEPROM for setup     */
 #define CONFIG_DDR_ECC			/* Use ECC when available       */
@@ -169,27 +168,26 @@
  */
 #define CONFIG_HARD_I2C		1	/* I2C with hardware support    */
 #undef	CONFIG_SOFT_I2C			/* I2C bit-banged	        */
-#define CFG_I2C_SPEED		100000	/* I2C speed and slave address  */
-#define CFG_I2C_SLAVE		0x7F
+#define CONFIG_SYS_I2C_SPEED		100000	/* I2C speed and slave address  */
+#define CONFIG_SYS_I2C_SLAVE		0x7F
 #define CONFIG_I2C_CMD_TREE     1
 #define CONFIG_I2C_MULTI_BUS    1
 
-#define CFG_SPD_BUS_NUM         0
+#define CONFIG_SYS_SPD_BUS_NUM         0
 #define IIC1_MCP3021_ADDR	0x4d
 #define IIC1_USB2507_ADDR	0x2c
 #ifdef CONFIG_I2C_MULTI_BUS
-#define CFG_I2C_NOPROBES        {{1, IIC1_USB2507_ADDR}}
+#define CONFIG_SYS_I2C_NOPROBES        {{1, IIC1_USB2507_ADDR}}
 #endif
-#define CFG_I2C_MULTI_EEPROMS
-#define CFG_I2C_EEPROM_ADDR	0x54
-#define CFG_I2C_EEPROM_ADDR_LEN 2
-#define CFG_EEPROM_PAGE_WRITE_ENABLE
-#define CFG_EEPROM_PAGE_WRITE_BITS 5
-#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10
-#define CFG_I2C_EEPROM_ADDR_OVERFLOW 0x01
+#define CONFIG_SYS_I2C_MULTI_EEPROMS
+#define CONFIG_SYS_I2C_EEPROM_ADDR	0x54
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 5
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10
+#define CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW 0x01
 
-#define CFG_EEPROM_WREN         1
-#define CFG_I2C_BOOT_EEPROM_ADDR 0x52
+#define CONFIG_SYS_EEPROM_WREN         1
+#define CONFIG_SYS_I2C_BOOT_EEPROM_ADDR 0x52
 
 /*
  * standard dtt sensor configuration - bottom bit will determine local or
@@ -209,13 +207,13 @@
  * - remote temp sensor enabled, min set to 0 deg, max set to 70 deg
  */
 #define CONFIG_DTT_ADM1021
-#define CFG_DTT_ADM1021		{ { 0x4c, 0x02, 0, 1, 70, 0, 1, 70, 0} }
+#define CONFIG_SYS_DTT_ADM1021		{ { 0x4c, 0x02, 0, 1, 70, 0, 1, 70, 0} }
 
 /*
  * RTC stuff
  */
 #define CONFIG_RTC_DS1338
-#define CFG_I2C_RTC_ADDR	0x68
+#define CONFIG_SYS_I2C_RTC_ADDR	0x68
 
 #undef	CONFIG_BOOTARGS
 
@@ -249,12 +247,13 @@
 #define CONFIG_BOOTDELAY	3	/* autoboot after 5 seconds	*/
 
 #define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
-#define CFG_LOADS_BAUD_CHANGE	1	/* allow baudrate change	*/
+#define CONFIG_SYS_LOADS_BAUD_CHANGE	1	/* allow baudrate change	*/
 
 #ifndef __ASSEMBLY__
 int du440_phy_addr(int devnum);
 #endif
 
+#define CONFIG_PPC4xx_EMAC
 #define	CONFIG_IBM_EMAC4_V4	1
 #define CONFIG_MII		1	/* MII PHY management		*/
 #define CONFIG_PHY_ADDR		du440_phy_addr(0) /* PHY address	*/
@@ -263,7 +262,7 @@ int du440_phy_addr(int devnum);
 #undef CONFIG_PHY_GIGE			/* no GbE detection		*/
 
 #define CONFIG_HAS_ETH0
-#define CFG_RX_ETH_BUFFER	128
+#define CONFIG_SYS_RX_ETH_BUFFER	128
 
 #define CONFIG_NET_MULTI	1
 #define CONFIG_HAS_ETH1		1	/* add support for "eth1addr"	*/
@@ -274,12 +273,12 @@ int du440_phy_addr(int devnum);
  */
 #define CONFIG_USB_OHCI_NEW
 #define CONFIG_USB_STORAGE
-#define CFG_OHCI_BE_CONTROLLER
+#define CONFIG_SYS_OHCI_BE_CONTROLLER
 
-#define CFG_USB_OHCI_CPU_INIT	1
-#define CFG_USB_OHCI_REGS_BASE	CFG_USB_HOST
-#define CFG_USB_OHCI_SLOT_NAME	"du440"
-#define CFG_USB_OHCI_MAX_ROOT_PORTS	15
+#define CONFIG_SYS_USB_OHCI_CPU_INIT	1
+#define CONFIG_SYS_USB_OHCI_REGS_BASE	CONFIG_SYS_USB_HOST
+#define CONFIG_SYS_USB_OHCI_SLOT_NAME	"du440"
+#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS	15
 
 /* Comment this out to enable USB 1.1 device */
 #define USB_2_0_DEVICE
@@ -319,25 +318,25 @@ int du440_phy_addr(int devnum);
 /*
  * Miscellaneous configurable options
  */
-#define CFG_LONGHELP			/* undef to save memory		*/
-#define CFG_PROMPT	        "=> "	/* Monitor Command Prompt	*/
+#define CONFIG_SYS_LONGHELP			/* undef to save memory		*/
+#define CONFIG_SYS_PROMPT	        "=> "	/* Monitor Command Prompt	*/
 #if defined(CONFIG_CMD_KGDB)
-#define CFG_CBSIZE	        1024	/* Console I/O Buffer Size	*/
+#define CONFIG_SYS_CBSIZE	        1024	/* Console I/O Buffer Size	*/
 #else
-#define CFG_CBSIZE	        256	/* Console I/O Buffer Size	*/
+#define CONFIG_SYS_CBSIZE	        256	/* Console I/O Buffer Size	*/
 #endif
 /* Print Buffer Size */
-#define CFG_PBSIZE              (CFG_CBSIZE+sizeof(CFG_PROMPT)+16)
-#define CFG_MAXARGS	        16	/* max number of command args	*/
-#define CFG_BARGSIZE	        CFG_CBSIZE /* Boot Argument Buffer Size	*/
+#define CONFIG_SYS_PBSIZE              (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
+#define CONFIG_SYS_MAXARGS	        16	/* max number of command args	*/
+#define CONFIG_SYS_BARGSIZE	        CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size	*/
 
-#define CFG_MEMTEST_START	0x00400000 /* memtest works on		*/
-#define CFG_MEMTEST_END		0x3f000000 /* 4 ... < 1GB DRAM	*/
+#define CONFIG_SYS_MEMTEST_START	0x00400000 /* memtest works on		*/
+#define CONFIG_SYS_MEMTEST_END		0x3f000000 /* 4 ... < 1GB DRAM	*/
 
-#define CFG_LOAD_ADDR		0x100000  /* default load address	*/
-#define CFG_EXTBDINFO		1	/* To use extended board_into (bd_t) */
+#define CONFIG_SYS_LOAD_ADDR		0x100000  /* default load address	*/
+#define CONFIG_SYS_EXTBDINFO		1	/* To use extended board_into (bd_t) */
 
-#define CFG_HZ		        1000	/* decrementer freq: 1 ms ticks	*/
+#define CONFIG_SYS_HZ		        1000	/* decrementer freq: 1 ms ticks	*/
 
 #define CONFIG_CMDLINE_EDITING	1	/* add command line history	*/
 #define CONFIG_LOOPW            1       /* enable loopw command         */
@@ -357,65 +356,65 @@ int du440_phy_addr(int devnum);
 #define CONFIG_PCI			/* include pci support	        */
 #define CONFIG_PCI_PNP			/* do (not) pci plug-and-play   */
 #define CONFIG_PCI_SCAN_SHOW		/* show pci devices on startup  */
-#define CFG_PCI_TARGBASE       0x80000000 /* PCIaddr mapped to CFG_PCI_MEMBASE*/
+#define CONFIG_SYS_PCI_TARGBASE       0x80000000 /* PCIaddr mapped to CONFIG_SYS_PCI_MEMBASE*/
 
 /* Board-specific PCI */
-#define CFG_PCI_TARGET_INIT
-#define CFG_PCI_MASTER_INIT
+#define CONFIG_SYS_PCI_TARGET_INIT
+#define CONFIG_SYS_PCI_MASTER_INIT
 
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define CFG_BOOTMAPSZ		(8 << 20)     /* Initial Memory map for Linux */
+#define CONFIG_SYS_BOOTMAPSZ		(8 << 20)     /* Initial Memory map for Linux */
 
 /*
  * External Bus Controller (EBC) Setup
  */
-#define CFG_FLASH		CFG_FLASH_BASE
+#define CONFIG_SYS_FLASH		CONFIG_SYS_FLASH_BASE
 
-#define CFG_CPLD_BASE		0xC0000000
-#define CFG_CPLD_RANGE	        0x00000010
-#define CFG_DUMEM_BASE		0xC0100000
-#define CFG_DUMEM_RANGE		0x00100000
-#define CFG_DUIO_BASE		0xC0200000
-#define CFG_DUIO_RANGE	        0x00010000
+#define CONFIG_SYS_CPLD_BASE		0xC0000000
+#define CONFIG_SYS_CPLD_RANGE	        0x00000010
+#define CONFIG_SYS_DUMEM_BASE		0xC0100000
+#define CONFIG_SYS_DUMEM_RANGE		0x00100000
+#define CONFIG_SYS_DUIO_BASE		0xC0200000
+#define CONFIG_SYS_DUIO_RANGE	        0x00010000
 
-#define CFG_NAND0_CS		2		/* NAND chip connected to CSx */
-#define CFG_NAND1_CS		3		/* NAND chip connected to CSx */
+#define CONFIG_SYS_NAND0_CS		2		/* NAND chip connected to CSx */
+#define CONFIG_SYS_NAND1_CS		3		/* NAND chip connected to CSx */
 /* Memory Bank 0 (NOR-FLASH) initialization */
-#define CFG_EBC_PB0AP		0x04017200
-#define CFG_EBC_PB0CR		(CFG_FLASH_BASE | 0xda000)
+#define CONFIG_SYS_EBC_PB0AP		0x04017200
+#define CONFIG_SYS_EBC_PB0CR		(CONFIG_SYS_FLASH_BASE | 0xda000)
 
 /* Memory Bank 1 (CPLD, 16 bytes needed, but 1MB is minimum) */
-#define CFG_EBC_PB1AP		0x018003c0
-#define CFG_EBC_PB1CR		(CFG_CPLD_BASE | 0x18000)
+#define CONFIG_SYS_EBC_PB1AP		0x018003c0
+#define CONFIG_SYS_EBC_PB1CR		(CONFIG_SYS_CPLD_BASE | 0x18000)
 
 /* Memory Bank 2 (NAND-FLASH) initialization */
-#define CFG_EBC_PB2AP		0x018003c0
-#define CFG_EBC_PB2CR		(CFG_NAND0_ADDR | 0x1c000)
+#define CONFIG_SYS_EBC_PB2AP		0x018003c0
+#define CONFIG_SYS_EBC_PB2CR		(CONFIG_SYS_NAND0_ADDR | 0x1c000)
 
 /* Memory Bank 3 (NAND-FLASH) initialization */
-#define CFG_EBC_PB3AP		0x018003c0
-#define CFG_EBC_PB3CR		(CFG_NAND1_ADDR | 0x1c000)
+#define CONFIG_SYS_EBC_PB3AP		0x018003c0
+#define CONFIG_SYS_EBC_PB3CR		(CONFIG_SYS_NAND1_ADDR | 0x1c000)
 
 /* Memory Bank 4 (DUMEM, 1MB) initialization */
-#define CFG_EBC_PB4AP		0x018053c0
-#define CFG_EBC_PB4CR		(CFG_DUMEM_BASE | 0x18000)
+#define CONFIG_SYS_EBC_PB4AP		0x018053c0
+#define CONFIG_SYS_EBC_PB4CR		(CONFIG_SYS_DUMEM_BASE | 0x18000)
 
 /* Memory Bank 5 (DUIO, 64KB needed, but 1MB is minimum) */
-#define CFG_EBC_PB5AP		0x018053c0
-#define CFG_EBC_PB5CR		(CFG_DUIO_BASE | 0x18000)
+#define CONFIG_SYS_EBC_PB5AP		0x018053c0
+#define CONFIG_SYS_EBC_PB5CR		(CONFIG_SYS_DUIO_BASE | 0x18000)
 
 /*
  * NAND FLASH
  */
-#define CFG_MAX_NAND_DEVICE	2
-#define NAND_MAX_CHIPS		CFG_MAX_NAND_DEVICE
-#define CFG_NAND_SELECT_DEVICE  1	/* nand driver supports mutipl. chips */
-#define CFG_NAND_BASE_LIST	{CFG_NAND0_ADDR + CFG_NAND0_CS, \
-				 CFG_NAND1_ADDR + CFG_NAND1_CS}
+#define CONFIG_SYS_MAX_NAND_DEVICE	2
+#define NAND_MAX_CHIPS		CONFIG_SYS_MAX_NAND_DEVICE
+#define CONFIG_SYS_NAND_SELECT_DEVICE  1	/* nand driver supports mutipl. chips */
+#define CONFIG_SYS_NAND_BASE_LIST	{CONFIG_SYS_NAND0_ADDR + CONFIG_SYS_NAND0_CS, \
+				 CONFIG_SYS_NAND1_ADDR + CONFIG_SYS_NAND1_CS}
 
 /*
  * Internal Definitions
@@ -432,4 +431,7 @@ int du440_phy_addr(int devnum);
 
 #define CONFIG_AUTOSCRIPT	1
 
+#define CONFIG_OF_LIBFDT
+#define CONFIG_OF_BOARD_SETUP
+
 #endif	/* __CONFIG_H */
diff --git a/include/configs/EB+MCF-EV123.h b/include/configs/EB+MCF-EV123.h
index 324eb6ce1..a13db7c22 100644
--- a/include/configs/EB+MCF-EV123.h
+++ b/include/configs/EB+MCF-EV123.h
@@ -27,7 +27,7 @@
 
 #define  CONFIG_EB_MCF_EV123
 
-#undef CFG_HALT_BEFOR_RAM_JUMP
+#undef CONFIG_SYS_HALT_BEFOR_RAM_JUMP
 
 /*
  * High Level Configuration Options (easy to change)
@@ -39,9 +39,9 @@
 #define CONFIG_MISC_INIT_R
 
 #define CONFIG_MCFUART
-#define CFG_UART_PORT		(0)
+#define CONFIG_SYS_UART_PORT		(0)
 #define CONFIG_BAUDRATE 9600
-#define CFG_BAUDRATE_TABLE { 9600 , 19200 , 38400 , 57600, 115200 }
+#define CONFIG_SYS_BAUDRATE_TABLE { 9600 , 19200 , 38400 , 57600, 115200 }
 
 #undef	CONFIG_MONITOR_IS_IN_RAM	/* define if monitor is started from a pre-loader */
 
@@ -51,18 +51,18 @@
  * Environment is embedded in u-boot in the second sector of the flash
  */
 #ifndef CONFIG_MONITOR_IS_IN_RAM
-#define CFG_ENV_ADDR		0xF003C000	/* End of 256K */
-#define CFG_ENV_SECT_SIZE	0x4000
-#define CFG_ENV_IS_IN_FLASH	1
+#define CONFIG_ENV_ADDR		0xF003C000	/* End of 256K */
+#define CONFIG_ENV_SECT_SIZE	0x4000
+#define CONFIG_ENV_IS_IN_FLASH	1
 /*
-#define CFG_ENV_IS_EMBEDDED	1
-#define CFG_ENV_ADDR_REDUND		0xF0018000
-#define CFG_ENV_SECT_SIZE_REDUND	0x4000
+#define CONFIG_ENV_IS_EMBEDDED	1
+#define CONFIG_ENV_ADDR_REDUND		0xF0018000
+#define CONFIG_ENV_SECT_SIZE_REDUND	0x4000
 */
 #else
-#define CFG_ENV_ADDR		0xFFE04000
-#define CFG_ENV_SECT_SIZE	0x2000
-#define CFG_ENV_IS_IN_FLASH	1
+#define CONFIG_ENV_ADDR		0xFFE04000
+#define CONFIG_ENV_SECT_SIZE	0x2000
+#define CONFIG_ENV_IS_IN_FLASH	1
 #endif
 
 
@@ -91,22 +91,22 @@
 #	define CONFIG_NET_MULTI		1
 #	define CONFIG_MII		1
 #	define CONFIG_MII_INIT		1
-#	define CFG_DISCOVER_PHY
-#	define CFG_RX_ETH_BUFFER	8
-#	define CFG_FAULT_ECHO_LINK_DOWN
+#	define CONFIG_SYS_DISCOVER_PHY
+#	define CONFIG_SYS_RX_ETH_BUFFER	8
+#	define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
 
-#	define CFG_FEC0_PINMUX		0
-#	define CFG_FEC0_MIIBASE		CFG_FEC0_IOBASE
+#	define CONFIG_SYS_FEC0_PINMUX		0
+#	define CONFIG_SYS_FEC0_MIIBASE		CONFIG_SYS_FEC0_IOBASE
 #	define MCFFEC_TOUT_LOOP		50000
-/* If CFG_DISCOVER_PHY is not defined - hardcoded */
-#	ifndef CFG_DISCOVER_PHY
+/* If CONFIG_SYS_DISCOVER_PHY is not defined - hardcoded */
+#	ifndef CONFIG_SYS_DISCOVER_PHY
 #		define FECDUPLEX	FULL
 #		define FECSPEED		_100BASET
 #	else
-#		ifndef CFG_FAULT_ECHO_LINK_DOWN
-#			define CFG_FAULT_ECHO_LINK_DOWN
+#		ifndef CONFIG_SYS_FAULT_ECHO_LINK_DOWN
+#			define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
 #		endif
-#	endif			/* CFG_DISCOVER_PHY */
+#	endif			/* CONFIG_SYS_DISCOVER_PHY */
 #endif
 
 #ifdef CONFIG_MCFFEC
@@ -119,146 +119,142 @@
 #endif				/* CONFIG_MCFFEC */
 
 #define CONFIG_BOOTDELAY	5
-#define CFG_PROMPT		"\nEV123 U-Boot> "
-#define	CFG_LONGHELP				/* undef to save memory		*/
+#define CONFIG_SYS_PROMPT		"\nEV123 U-Boot> "
+#define	CONFIG_SYS_LONGHELP				/* undef to save memory		*/
 
 #if defined(CONFIG_CMD_KGDB)
-#define	CFG_CBSIZE		1024		/* Console I/O Buffer Size	*/
+#define	CONFIG_SYS_CBSIZE		1024		/* Console I/O Buffer Size	*/
 #else
-#define	CFG_CBSIZE		256		/* Console I/O Buffer Size	*/
+#define	CONFIG_SYS_CBSIZE		256		/* Console I/O Buffer Size	*/
 #endif
-#define	CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define	CFG_MAXARGS		16		/* max number of command args	*/
-#define CFG_BARGSIZE		CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+#define	CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define	CONFIG_SYS_MAXARGS		16		/* max number of command args	*/
+#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
 
-#define CFG_LOAD_ADDR		0x20000
+#define CONFIG_SYS_LOAD_ADDR		0x20000
 
-#define CFG_MEMTEST_START	0x100000
-#define CFG_MEMTEST_END		0x400000
-/*#define CFG_DRAM_TEST		1 */
-#undef CFG_DRAM_TEST
+#define CONFIG_SYS_MEMTEST_START	0x100000
+#define CONFIG_SYS_MEMTEST_END		0x400000
+/*#define CONFIG_SYS_DRAM_TEST		1 */
+#undef CONFIG_SYS_DRAM_TEST
 
 /* Clock and PLL Configuration */
-#define CFG_HZ			10000000
-#define	CFG_CLK			58982400       /* 9,8304MHz * 6 */
+#define CONFIG_SYS_HZ			10000000
+#define	CONFIG_SYS_CLK			58982400       /* 9,8304MHz * 6 */
 
 /* PLL Configuration: Ext Clock * 6 (see table 9-4 of MCF user manual) */
 
-#define CFG_MFD			0x01	/* PLL Multiplication Factor Devider */
-#define CFG_RFD			0x00	/* PLL Reduce Frecuency Devider */
+#define CONFIG_SYS_MFD			0x01	/* PLL Multiplication Factor Devider */
+#define CONFIG_SYS_RFD			0x00	/* PLL Reduce Frecuency Devider */
 
 /*
  * Low Level Configuration Settings
  * (address mappings, register initial values, etc.)
  * You should know what you are doing if you make changes here.
  */
-#define	CFG_MBAR		0x40000000
+#define	CONFIG_SYS_MBAR		0x40000000
 
 /*-----------------------------------------------------------------------
  * Definitions for initial stack pointer and data area (in DPRAM)
  */
-#define CFG_INIT_RAM_ADDR       0x20000000
-#define CFG_INIT_RAM_END	0x10000		/* End of used area in internal SRAM	*/
-#define CFG_GBL_DATA_SIZE	64		/* size in bytes reserved for initial data */
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_INIT_RAM_ADDR       0x20000000
+#define CONFIG_SYS_INIT_RAM_END	0x10000		/* End of used area in internal SRAM	*/
+#define CONFIG_SYS_GBL_DATA_SIZE	64		/* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
 /*-----------------------------------------------------------------------
  * Start addresses for the final memory configuration
  * (Set up by the startup code)
- * Please note that CFG_SDRAM_BASE _must_ start at 0
+ * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
  */
-#define CFG_SDRAM_BASE1		0x00000000
-#define	CFG_SDRAM_SIZE1		16		/* SDRAM size in MB */
+#define CONFIG_SYS_SDRAM_BASE1		0x00000000
+#define	CONFIG_SYS_SDRAM_SIZE1		16		/* SDRAM size in MB */
 
 /*
-#define CFG_SDRAM_BASE0		CFG_SDRAM_BASE1+CFG_SDRAM_SIZE1*1024*1024
-#define	CFG_SDRAM_SIZE0		16	*/	/* SDRAM size in MB */
+#define CONFIG_SYS_SDRAM_BASE0		CONFIG_SYS_SDRAM_BASE1+CONFIG_SYS_SDRAM_SIZE1*1024*1024
+#define	CONFIG_SYS_SDRAM_SIZE0		16	*/	/* SDRAM size in MB */
 
-#define CFG_SDRAM_BASE		CFG_SDRAM_BASE1
-#define	CFG_SDRAM_SIZE		CFG_SDRAM_SIZE1
+#define CONFIG_SYS_SDRAM_BASE		CONFIG_SYS_SDRAM_BASE1
+#define	CONFIG_SYS_SDRAM_SIZE		CONFIG_SYS_SDRAM_SIZE1
 
-#define CFG_FLASH_BASE		0xFFE00000
-#define	CFG_INT_FLASH_BASE	0xF0000000
-#define CFG_INT_FLASH_ENABLE	0x21
+#define CONFIG_SYS_FLASH_BASE		CONFIG_SYS_CS0_BASE
+#define	CONFIG_SYS_INT_FLASH_BASE	0xF0000000
+#define CONFIG_SYS_INT_FLASH_ENABLE	0x21
 
 /* If M5282 port is fully implemented the monitor base will be behind
  * the vector table. */
-#if (TEXT_BASE !=  CFG_INT_FLASH_BASE)
-#define CFG_MONITOR_BASE	(TEXT_BASE + 0x400)
+#if (TEXT_BASE !=  CONFIG_SYS_INT_FLASH_BASE)
+#define CONFIG_SYS_MONITOR_BASE	(TEXT_BASE + 0x400)
 #else
-#define CFG_MONITOR_BASE	(TEXT_BASE + 0x418) /* 24 Byte for CFM-Config */
+#define CONFIG_SYS_MONITOR_BASE	(TEXT_BASE + 0x418) /* 24 Byte for CFM-Config */
 #endif
 
-#define CFG_MONITOR_LEN		0x20000
-#define CFG_MALLOC_LEN		(256 << 10)
-#define CFG_BOOTPARAMS_LEN	64*1024
+#define CONFIG_SYS_MONITOR_LEN		0x20000
+#define CONFIG_SYS_MALLOC_LEN		(256 << 10)
+#define CONFIG_SYS_BOOTPARAMS_LEN	64*1024
 
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization ??
  */
-#define	CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux	*/
+#define	CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux	*/
 
 /*-----------------------------------------------------------------------
  * FLASH organization
  */
-#define	CFG_MAX_FLASH_SECT	35
-#define	CFG_MAX_FLASH_BANKS	2
-#define	CFG_FLASH_ERASE_TOUT	10000000
-#define	CFG_FLASH_PROTECTION
+#define	CONFIG_SYS_MAX_FLASH_SECT	35
+#define	CONFIG_SYS_MAX_FLASH_BANKS	2
+#define	CONFIG_SYS_FLASH_ERASE_TOUT	10000000
+#define	CONFIG_SYS_FLASH_PROTECTION
 
 /*-----------------------------------------------------------------------
  * Cache Configuration
  */
-#define CFG_CACHELINE_SIZE	16
+#define CONFIG_SYS_CACHELINE_SIZE	16
 
 /*-----------------------------------------------------------------------
  * Memory bank definitions
  */
 
-#define CFG_CS0_BASE		CFG_FLASH_BASE
-#define CFG_CS0_SIZE		2*1024*1024
-#define CFG_CS0_WIDTH		16
-#define CFG_CS0_RO		0
-#define CFG_CS0_WS		6
+#define CONFIG_SYS_CS0_BASE		0xFFE00000
+#define CONFIG_SYS_CS0_CTRL		0x00001980
+#define CONFIG_SYS_CS0_MASK		0x001F0001
 
-#define CFG_CS3_BASE		0xE0000000
-#define CFG_CS3_SIZE		1*1024*1024
-#define CFG_CS3_WIDTH		16
-#define CFG_CS3_RO		0
-#define CFG_CS3_WS		6
+#define CONFIG_SYS_CS3_BASE		0xE0000000
+#define CONFIG_SYS_CS0_CTRL		0x00001980
+#define CONFIG_SYS_CS3_MASK		0x000F0001
 
 /*-----------------------------------------------------------------------
  * Port configuration
  */
-#define CFG_PACNT		0x0000000	/* Port A D[31:24] */
-#define CFG_PADDR		0x0000000
-#define CFG_PADAT		0x0000000
+#define CONFIG_SYS_PACNT		0x0000000	/* Port A D[31:24] */
+#define CONFIG_SYS_PADDR		0x0000000
+#define CONFIG_SYS_PADAT		0x0000000
 
-#define CFG_PBCNT		0x0000000	/* Port B D[23:16] */
-#define CFG_PBDDR		0x0000000
-#define CFG_PBDAT		0x0000000
+#define CONFIG_SYS_PBCNT		0x0000000	/* Port B D[23:16] */
+#define CONFIG_SYS_PBDDR		0x0000000
+#define CONFIG_SYS_PBDAT		0x0000000
 
-#define CFG_PCCNT		0x0000000	/* Port C D[15:08] */
-#define CFG_PCDDR		0x0000000
-#define CFG_PCDAT		0x0000000
+#define CONFIG_SYS_PCCNT		0x0000000	/* Port C D[15:08] */
+#define CONFIG_SYS_PCDDR		0x0000000
+#define CONFIG_SYS_PCDAT		0x0000000
 
-#define CFG_PDCNT		0x0000000	/* Port D D[07:00] */
-#define CFG_PCDDR		0x0000000
-#define CFG_PCDAT		0x0000000
+#define CONFIG_SYS_PDCNT		0x0000000	/* Port D D[07:00] */
+#define CONFIG_SYS_PCDDR		0x0000000
+#define CONFIG_SYS_PCDAT		0x0000000
 
-#define CFG_PEHLPAR		0xC0
-#define CFG_PUAPAR		0x0F		/* UA0..UA3 = Uart 0 +1 */
-#define CFG_DDRUA		0x05
-#define CFG_PJPAR		0xFF;
+#define CONFIG_SYS_PEHLPAR		0xC0
+#define CONFIG_SYS_PUAPAR		0x0F		/* UA0..UA3 = Uart 0 +1 */
+#define CONFIG_SYS_DDRUA		0x05
+#define CONFIG_SYS_PJPAR		0xFF
 
 /*-----------------------------------------------------------------------
  * CCM configuration
  */
 
-#define	CFG_CCM_SIZ		0
+#define	CONFIG_SYS_CCM_SIZ		0
 
 /*---------------------------------------------------------------------*/
 #endif	/* _CONFIG_M5282EVB_H */
diff --git a/include/configs/ELPPC.h b/include/configs/ELPPC.h
index c64537fbf..79392668e 100644
--- a/include/configs/ELPPC.h
+++ b/include/configs/ELPPC.h
@@ -63,7 +63,7 @@
     "bootm"
 
 #define CONFIG_LOADS_ECHO       0       /* echo off for serial download */
-#define CFG_LOADS_BAUD_CHANGE           /* allow baudrate changes */
+#define CONFIG_SYS_LOADS_BAUD_CHANGE           /* allow baudrate changes */
 
 /*
  * BOOTP options
@@ -88,8 +88,8 @@
 /*
  * Miscellaneous configurable options
  */
-#define CFG_LONGHELP                    /* undef to save memory */
-#define CFG_PROMPT              "=> "   /* Monitor Command Prompt */
+#define CONFIG_SYS_LONGHELP                    /* undef to save memory */
+#define CONFIG_SYS_PROMPT              "=> "   /* Monitor Command Prompt */
 
 /*
  * choose between COM1 and COM2 as serial console
@@ -97,72 +97,72 @@
 #define CONFIG_CONS_INDEX       1
 
 #if defined(CONFIG_CMD_KGDB)
-#define CFG_CBSIZE              1024        /* Console I/O Buffer Size */
+#define CONFIG_SYS_CBSIZE              1024        /* Console I/O Buffer Size */
 #else
-#define CFG_CBSIZE              256         /* Console I/O Buffer Size */
+#define CONFIG_SYS_CBSIZE              256         /* Console I/O Buffer Size */
 #endif
-#define CFG_PBSIZE              (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define CFG_MAXARGS             16          /* max number of command args    */
-#define CFG_BARGSIZE            CFG_CBSIZE  /* Boot Argument Buffer Size    */
+#define CONFIG_SYS_PBSIZE              (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS             16          /* max number of command args    */
+#define CONFIG_SYS_BARGSIZE            CONFIG_SYS_CBSIZE  /* Boot Argument Buffer Size    */
 
-#define CFG_MEMTEST_START       0x00000000  /* memtest works on    */
-#define CFG_MEMTEST_END         0x04000000  /* 0 ... 64 MB in DRAM    */
+#define CONFIG_SYS_MEMTEST_START       0x00000000  /* memtest works on    */
+#define CONFIG_SYS_MEMTEST_END         0x04000000  /* 0 ... 64 MB in DRAM    */
 
-#define CFG_LOAD_ADDR           0x1000000   /* default load address    */
+#define CONFIG_SYS_LOAD_ADDR           0x1000000   /* default load address    */
 
-#define CFG_HZ                  1000        /* dec. freq: 1 ms ticks */
+#define CONFIG_SYS_HZ                  1000        /* dec. freq: 1 ms ticks */
 
-#define CFG_BAUDRATE_TABLE      { 9600, 19200, 38400, 57600, 115200, 230400 }
+#define CONFIG_SYS_BAUDRATE_TABLE      { 9600, 19200, 38400, 57600, 115200, 230400 }
 
 /*
  * Low Level Configuration Settings
  * (address mappings, register initial values, etc.)
  * You should know what you are doing if you make changes here.
  */
-#define CFG_BOARD_ASM_INIT
+#define CONFIG_SYS_BOARD_ASM_INIT
 #define CONFIG_MISC_INIT_R
 
 /*
  * Address mapping scheme for the MPC107 mem controller is mapping B (CHRP)
  */
-#undef  CFG_ADDRESS_MAP_A
+#undef  CONFIG_SYS_ADDRESS_MAP_A
 
-#define CFG_PCI_MEMORY_BUS      0x00000000
-#define CFG_PCI_MEMORY_PHYS     0x00000000
-#define CFG_PCI_MEMORY_SIZE     0x40000000
+#define CONFIG_SYS_PCI_MEMORY_BUS      0x00000000
+#define CONFIG_SYS_PCI_MEMORY_PHYS     0x00000000
+#define CONFIG_SYS_PCI_MEMORY_SIZE     0x40000000
 
-#define CFG_PCI_MEM_BUS         0x80000000
-#define CFG_PCI_MEM_PHYS        0x80000000
-#define CFG_PCI_MEM_SIZE        0x7d000000
+#define CONFIG_SYS_PCI_MEM_BUS         0x80000000
+#define CONFIG_SYS_PCI_MEM_PHYS        0x80000000
+#define CONFIG_SYS_PCI_MEM_SIZE        0x7d000000
 
-#define CFG_ISA_MEM_BUS         0x00000000
-#define CFG_ISA_MEM_PHYS        0xfd000000
-#define CFG_ISA_MEM_SIZE        0x01000000
+#define CONFIG_SYS_ISA_MEM_BUS         0x00000000
+#define CONFIG_SYS_ISA_MEM_PHYS        0xfd000000
+#define CONFIG_SYS_ISA_MEM_SIZE        0x01000000
 
-#define CFG_PCI_IO_BUS          0x00800000
-#define CFG_PCI_IO_PHYS         0xfe800000
-#define CFG_PCI_IO_SIZE         0x00400000
+#define CONFIG_SYS_PCI_IO_BUS          0x00800000
+#define CONFIG_SYS_PCI_IO_PHYS         0xfe800000
+#define CONFIG_SYS_PCI_IO_SIZE         0x00400000
 
-#define CFG_ISA_IO_BUS          0x00000000
-#define CFG_ISA_IO_PHYS         0xfe000000
-#define CFG_ISA_IO_SIZE         0x00800000
+#define CONFIG_SYS_ISA_IO_BUS          0x00000000
+#define CONFIG_SYS_ISA_IO_PHYS         0xfe000000
+#define CONFIG_SYS_ISA_IO_SIZE         0x00800000
 
 /* driver defines FDC,IDE,... */
-#define CFG_ISA_IO_BASE_ADDRESS CFG_ISA_IO_PHYS
-#define CFG_ISA_IO              CFG_ISA_IO_PHYS
-#define CFG_60X_PCI_IO_OFFSET   CFG_ISA_IO_PHYS
+#define CONFIG_SYS_ISA_IO_BASE_ADDRESS CONFIG_SYS_ISA_IO_PHYS
+#define CONFIG_SYS_ISA_IO              CONFIG_SYS_ISA_IO_PHYS
+#define CONFIG_SYS_60X_PCI_IO_OFFSET   CONFIG_SYS_ISA_IO_PHYS
 
 /*
  * Start addresses for the final memory configuration
  * (Set up by the startup code)
- * Please note that CFG_SDRAM_BASE _must_ start at 0
+ * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
  */
-#define CFG_SDRAM_BASE          0x00000000
+#define CONFIG_SYS_SDRAM_BASE          0x00000000
 
-#define CFG_USR_LED_BASE        0x78000000
-#define CFG_NVRAM_BASE          0xff000000
-#define CFG_UART_BASE           0xff400000
-#define CFG_FLASH_BASE          0xfff00000
+#define CONFIG_SYS_USR_LED_BASE        0x78000000
+#define CONFIG_SYS_NVRAM_BASE          0xff000000
+#define CONFIG_SYS_UART_BASE           0xff400000
+#define CONFIG_SYS_FLASH_BASE          0xfff00000
 
 #define MPC107_EUMB_ADDR        0xfce00000
 #define MPC107_EUMB_PI          0xfce41090
@@ -173,11 +173,11 @@
 /*
  * Definitions for initial stack pointer and data area
  */
-#define CFG_INIT_RAM_ADDR       0x00fd0000  /* above the memtest region */
-#define CFG_INIT_RAM_END        0x4000
-#define CFG_GBL_DATA_SIZE       64          /* size in bytes reserved for init data */
-#define CFG_GBL_DATA_OFFSET     (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP_OFFSET      CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_INIT_RAM_ADDR       0x00fd0000  /* above the memtest region */
+#define CONFIG_SYS_INIT_RAM_END        0x4000
+#define CONFIG_SYS_GBL_DATA_SIZE       64          /* size in bytes reserved for init data */
+#define CONFIG_SYS_GBL_DATA_OFFSET     (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET      CONFIG_SYS_GBL_DATA_OFFSET
 
 /*
  * Flash mapping/organization on the MPC10x.
@@ -185,11 +185,11 @@
 #define FLASH_BASE0_PRELIM      0xff800000
 #define FLASH_BASE1_PRELIM      0xffc00000
 
-#define CFG_MAX_FLASH_BANKS     2           /* max number of memory banks    */
-#define CFG_MAX_FLASH_SECT      67          /* max number of sectors on one chip */
+#define CONFIG_SYS_MAX_FLASH_BANKS     2           /* max number of memory banks    */
+#define CONFIG_SYS_MAX_FLASH_SECT      67          /* max number of sectors on one chip */
 
-#define CFG_FLASH_ERASE_TOUT    120000      /* Timeout for Flash Erase (in ms) */
-#define CFG_FLASH_WRITE_TOUT    500         /* Timeout for Flash Write (in ms) */
+#define CONFIG_SYS_FLASH_ERASE_TOUT    120000      /* Timeout for Flash Erase (in ms) */
+#define CONFIG_SYS_FLASH_WRITE_TOUT    500         /* Timeout for Flash Write (in ms) */
 
 /*
  * JFFS2 partitions
@@ -209,33 +209,33 @@
 #define MTDPARTS_DEFAULT	"mtdparts=elppc-0:-(jffs2),elppc-1:-(user)"
 */
 
-#define CFG_MONITOR_BASE        CFG_FLASH_BASE
-#define CFG_MONITOR_LEN         0x40000     /* Reserve 256 kB for Monitor */
-#define CFG_MALLOC_LEN          0x20000     /* Reserve 128 kB for malloc() */
-#undef  CFG_MEMTEST
+#define CONFIG_SYS_MONITOR_BASE        CONFIG_SYS_FLASH_BASE
+#define CONFIG_SYS_MONITOR_LEN         0x40000     /* Reserve 256 kB for Monitor */
+#define CONFIG_SYS_MALLOC_LEN          0x20000     /* Reserve 128 kB for malloc() */
+#undef  CONFIG_SYS_MEMTEST
 
 /*
  * Environment settings
  */
 #define CONFIG_ENV_OVERWRITE
-#define CFG_ENV_IS_IN_NVRAM     1           /* use NVRAM for environment vars */
-#define CFG_NVRAM_SIZE          0x800       /* NVRAM size (2kB) */
-#define CFG_ENV_SIZE            0x400       /* Size of Environment vars (1kB) */
-#define CFG_ENV_ADDR            0x0
-#define CFG_ENV_MAP_ADRS        0xff000000
-#define CFG_NV_SROM_COPY_ADDR   (CFG_ENV_ADDR + CFG_ENV_SIZE)
-#define CFG_NVRAM_ACCESS_ROUTINE            /* only byte accsess alowed */
-#define CFG_SROM_SIZE           0x100       /* shadow of revision info is in nvram */
+#define CONFIG_ENV_IS_IN_NVRAM     1           /* use NVRAM for environment vars */
+#define CONFIG_SYS_NVRAM_SIZE          0x800       /* NVRAM size (2kB) */
+#define CONFIG_ENV_SIZE            0x400       /* Size of Environment vars (1kB) */
+#define CONFIG_ENV_ADDR            0x0
+#define CONFIG_ENV_MAP_ADRS        0xff000000
+#define CONFIG_SYS_NV_SROM_COPY_ADDR   (CONFIG_ENV_ADDR + CONFIG_ENV_SIZE)
+#define CONFIG_SYS_NVRAM_ACCESS_ROUTINE            /* only byte accsess alowed */
+#define CONFIG_SYS_SROM_SIZE           0x100       /* shadow of revision info is in nvram */
 
 /*
  * Serial devices
  */
-#define CFG_NS16550
-#define CFG_NS16550_SERIAL
-#define CFG_NS16550_REG_SIZE    1
-#define CFG_NS16550_CLK         24000000
-#define CFG_NS16550_COM1        (CFG_UART_BASE + 0)
-#define CFG_NS16550_COM2        (CFG_UART_BASE + 8)
+#define CONFIG_SYS_NS16550
+#define CONFIG_SYS_NS16550_SERIAL
+#define CONFIG_SYS_NS16550_REG_SIZE    1
+#define CONFIG_SYS_NS16550_CLK         24000000
+#define CONFIG_SYS_NS16550_COM1        (CONFIG_SYS_UART_BASE + 0)
+#define CONFIG_SYS_NS16550_COM2        (CONFIG_SYS_UART_BASE + 8)
 
 /*
  * PCI stuff
@@ -263,74 +263,74 @@
  */
 #if 1
 
-#define CFG_IBAT0L 0
-#define CFG_IBAT0U 0
-#define CFG_DBAT0L CFG_IBAT1L
-#define CFG_DBAT0U CFG_IBAT1U
+#define CONFIG_SYS_IBAT0L 0
+#define CONFIG_SYS_IBAT0U 0
+#define CONFIG_SYS_DBAT0L CONFIG_SYS_IBAT1L
+#define CONFIG_SYS_DBAT0U CONFIG_SYS_IBAT1U
 
-#define CFG_IBAT1L 0
-#define CFG_IBAT1U 0
-#define CFG_DBAT1L CFG_IBAT1L
-#define CFG_DBAT1U CFG_IBAT1U
+#define CONFIG_SYS_IBAT1L 0
+#define CONFIG_SYS_IBAT1U 0
+#define CONFIG_SYS_DBAT1L CONFIG_SYS_IBAT1L
+#define CONFIG_SYS_DBAT1U CONFIG_SYS_IBAT1U
 
-#define CFG_IBAT2L 0
-#define CFG_IBAT2U 0
-#define CFG_DBAT2L CFG_IBAT2L
-#define CFG_DBAT2U CFG_IBAT2U
+#define CONFIG_SYS_IBAT2L 0
+#define CONFIG_SYS_IBAT2U 0
+#define CONFIG_SYS_DBAT2L CONFIG_SYS_IBAT2L
+#define CONFIG_SYS_DBAT2U CONFIG_SYS_IBAT2U
 
-#define CFG_IBAT3L 0
-#define CFG_IBAT3U 0
-#define CFG_DBAT3L CFG_IBAT3L
-#define CFG_DBAT3U CFG_IBAT3U
+#define CONFIG_SYS_IBAT3L 0
+#define CONFIG_SYS_IBAT3U 0
+#define CONFIG_SYS_DBAT3L CONFIG_SYS_IBAT3L
+#define CONFIG_SYS_DBAT3U CONFIG_SYS_IBAT3U
 
 #else
 
 /* SDRAM */
-#define CFG_IBAT0L (CFG_SDRAM_BASE | BATL_RW)
-#define CFG_IBAT0U (CFG_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
-#define CFG_DBAT0L CFG_IBAT1L
-#define CFG_DBAT0U CFG_IBAT1U
+#define CONFIG_SYS_IBAT0L (CONFIG_SYS_SDRAM_BASE | BATL_RW)
+#define CONFIG_SYS_IBAT0U (CONFIG_SYS_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CONFIG_SYS_DBAT0L CONFIG_SYS_IBAT1L
+#define CONFIG_SYS_DBAT0U CONFIG_SYS_IBAT1U
 
 /* address range for flashes */
-#define CFG_IBAT1L (CFG_FLASH_BASE | BATL_RW | BATL_CACHEINHIBIT)
-#define CFG_IBAT1U (CFG_FLASH_BASE | BATU_BL_16M | BATU_VS | BATU_VP)
-#define CFG_DBAT1L CFG_IBAT1L
-#define CFG_DBAT1U CFG_IBAT1U
+#define CONFIG_SYS_IBAT1L (CONFIG_SYS_FLASH_BASE | BATL_RW | BATL_CACHEINHIBIT)
+#define CONFIG_SYS_IBAT1U (CONFIG_SYS_FLASH_BASE | BATU_BL_16M | BATU_VS | BATU_VP)
+#define CONFIG_SYS_DBAT1L CONFIG_SYS_IBAT1L
+#define CONFIG_SYS_DBAT1U CONFIG_SYS_IBAT1U
 
 /* ISA IO space */
-#define CFG_IBAT2L (CFG_ISA_IO | BATL_RW | BATL_CACHEINHIBIT)
-#define CFG_IBAT2U (CFG_ISA_IO | BATU_BL_16M | BATU_VS | BATU_VP)
-#define CFG_DBAT2L CFG_IBAT2L
-#define CFG_DBAT2U CFG_IBAT2U
+#define CONFIG_SYS_IBAT2L (CONFIG_SYS_ISA_IO | BATL_RW | BATL_CACHEINHIBIT)
+#define CONFIG_SYS_IBAT2U (CONFIG_SYS_ISA_IO | BATU_BL_16M | BATU_VS | BATU_VP)
+#define CONFIG_SYS_DBAT2L CONFIG_SYS_IBAT2L
+#define CONFIG_SYS_DBAT2U CONFIG_SYS_IBAT2U
 
 /* ISA memory space */
-#define CFG_IBAT3L (CFG_ISA_MEM | BATL_RW | BATL_CACHEINHIBIT)
-#define CFG_IBAT3U (CFG_ISA_MEM | BATU_BL_16M | BATU_VS | BATU_VP)
-#define CFG_DBAT3L CFG_IBAT3L
-#define CFG_DBAT3U CFG_IBAT3U
+#define CONFIG_SYS_IBAT3L (CONFIG_SYS_ISA_MEM | BATL_RW | BATL_CACHEINHIBIT)
+#define CONFIG_SYS_IBAT3U (CONFIG_SYS_ISA_MEM | BATU_BL_16M | BATU_VS | BATU_VP)
+#define CONFIG_SYS_DBAT3L CONFIG_SYS_IBAT3L
+#define CONFIG_SYS_DBAT3U CONFIG_SYS_IBAT3U
 
 #endif
 
 /*
  * Speed settings are board specific
  */
-#define CFG_BUS_HZ              100000000
-#define CFG_CPU_CLK             400000000
-#define CFG_BUS_CLK             CFG_BUS_HZ
+#define CONFIG_SYS_BUS_HZ              100000000
+#define CONFIG_SYS_CPU_CLK             400000000
+#define CONFIG_SYS_BUS_CLK             CONFIG_SYS_BUS_HZ
 
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define CFG_BOOTMAPSZ           (8 << 20)           /* Initial Memory map for Linux */
+#define CONFIG_SYS_BOOTMAPSZ           (8 << 20)           /* Initial Memory map for Linux */
 
 /*
  * Cache Configuration
  */
-#define CFG_CACHELINE_SIZE        32    /* For all MPC74xx CPUs */
+#define CONFIG_SYS_CACHELINE_SIZE        32    /* For all MPC74xx CPUs */
 #if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT        5    /* log base 2 of the above value */
+#define CONFIG_SYS_CACHELINE_SHIFT        5    /* log base 2 of the above value */
 #endif
 
 /*
@@ -338,7 +338,7 @@
  * look in include/74xx_7xx.h for the defines used here
  */
 
-#define CFG_L2
+#define CONFIG_SYS_L2
 
 #if 1
 #define L2_INIT     0       /* cpu 750 CXe*/
@@ -358,7 +358,7 @@
 
 #define CONFIG_NET_MULTI        /* Multi ethernet cards support */
 #define CONFIG_EEPRO100
-#define CFG_RX_ETH_BUFFER	8               /* use 8 rx buffer on eepro100  */
+#define CONFIG_SYS_RX_ETH_BUFFER	8               /* use 8 rx buffer on eepro100  */
 #define CONFIG_EEPRO100_SROM_WRITE
 
 #endif    /* __CONFIG_H */
diff --git a/include/configs/ELPT860.h b/include/configs/ELPT860.h
index f927a2c9c..ff58ea922 100644
--- a/include/configs/ELPT860.h
+++ b/include/configs/ELPT860.h
@@ -97,7 +97,7 @@
 #define CONFIG_RTC_DS164x	1	/* RTC is a Dallas DS1646	*/
 
 #define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
-#undef	  CFG_LOADS_BAUD_CHANGE		/* don't allow baudrate change	*/
+#undef	  CONFIG_SYS_LOADS_BAUD_CHANGE		/* don't allow baudrate change	*/
 
 
 /*
@@ -112,37 +112,37 @@
 /*
  * Miscellaneous configurable options
  */
-#define CFG_LONGHELP			/* undef to save memory		*/
-#define CFG_PROMPT     "LEOX_elpt860: " /* Monitor Command Prompt	*/
+#define CONFIG_SYS_LONGHELP			/* undef to save memory		*/
+#define CONFIG_SYS_PROMPT     "LEOX_elpt860: " /* Monitor Command Prompt	*/
 
 #if defined(CONFIG_CMD_KGDB)
-#  define CFG_CBSIZE	1024		/* Console I/O Buffer Size	*/
+#  define CONFIG_SYS_CBSIZE	1024		/* Console I/O Buffer Size	*/
 #else
-#  define CFG_CBSIZE	 256		/* Console I/O Buffer Size	*/
+#  define CONFIG_SYS_CBSIZE	 256		/* Console I/O Buffer Size	*/
 #endif
 
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define CFG_MAXARGS	  16		/* max number of command args	*/
-#define CFG_BARGSIZE	  CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS	  16		/* max number of command args	*/
+#define CONFIG_SYS_BARGSIZE	  CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
 
-#define CFG_MEMTEST_START	0x00400000	/* memtest works on	*/
-#define CFG_MEMTEST_END		0x00C00000	/* 4 ... 12 MB in DRAM	*/
+#define CONFIG_SYS_MEMTEST_START	0x00400000	/* memtest works on	*/
+#define CONFIG_SYS_MEMTEST_END		0x00C00000	/* 4 ... 12 MB in DRAM	*/
 
-#define CFG_LOAD_ADDR		0x00100000	/* default load address */
+#define CONFIG_SYS_LOAD_ADDR		0x00100000	/* default load address */
 
-#define CFG_HZ		1000		/* decrementer freq: 1 ms ticks */
+#define CONFIG_SYS_HZ		1000		/* decrementer freq: 1 ms ticks */
 
 /*
  * Environment Variables and Storages
  */
 #define CONFIG_ENV_OVERWRITE	1  /* Allow Overwrite of serial# & ethaddr */
 
-#undef	  CFG_ENV_IS_IN_NVRAM	       /* Environment is in NVRAM	*/
-#undef	  CFG_ENV_IS_IN_EEPROM	       /* Environment is in I2C EEPROM	*/
-#define CFG_ENV_IS_IN_FLASH	1      /* Environment is in FLASH	*/
+#undef	  CONFIG_ENV_IS_IN_NVRAM	       /* Environment is in NVRAM	*/
+#undef	  CONFIG_ENV_IS_IN_EEPROM	       /* Environment is in I2C EEPROM	*/
+#define CONFIG_ENV_IS_IN_FLASH	1      /* Environment is in FLASH	*/
 
 #define CONFIG_BAUDRATE		9600   /* console baudrate = 9600 bps	*/
-#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
 
 #define CONFIG_ETHADDR		00:01:77:00:60:40
 #define CONFIG_IPADDR		192.168.0.30
@@ -160,83 +160,83 @@
 /*-----------------------------------------------------------------------
  * Internal Memory Mapped Register
  */
-#define CFG_IMMR		0xFF000000
+#define CONFIG_SYS_IMMR		0xFF000000
 
 /*-----------------------------------------------------------------------
  * Definitions for initial stack pointer and data area (in DPRAM)
  */
-#define CFG_INIT_RAM_ADDR	CFG_IMMR
-#define CFG_INIT_RAM_END	0x2F00	/* End of used area in DPRAM	*/
-#define CFG_GBL_DATA_SIZE	64  /* size in bytes reserved for initial data */
-#define CFG_GBL_DATA_OFFSET    (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_IMMR
+#define CONFIG_SYS_INIT_RAM_END	0x2F00	/* End of used area in DPRAM	*/
+#define CONFIG_SYS_GBL_DATA_SIZE	64  /* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET    (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
 /*-----------------------------------------------------------------------
  * Start addresses for the final memory configuration
  * (Set up by the startup code)
- * Please note that CFG_SDRAM_BASE _must_ start at 0
+ * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
  */
-#define CFG_SDRAM_BASE		0x00000000
-#define CFG_FLASH_BASE		0x02000000
-#define CFG_NVRAM_BASE		0x03000000
+#define CONFIG_SYS_SDRAM_BASE		0x00000000
+#define CONFIG_SYS_FLASH_BASE		0x02000000
+#define CONFIG_SYS_NVRAM_BASE		0x03000000
 
-#if defined(CFG_ENV_IS_IN_FLASH)
+#if defined(CONFIG_ENV_IS_IN_FLASH)
 #  if defined(DEBUG)
-#    define CFG_MONITOR_LEN	(320 << 10)  /* Reserve 320 kB for Monitor  */
+#    define CONFIG_SYS_MONITOR_LEN	(320 << 10)  /* Reserve 320 kB for Monitor  */
 #  else
-#    define CFG_MONITOR_LEN	(256 << 10)  /* Reserve 256 kB for Monitor  */
+#    define CONFIG_SYS_MONITOR_LEN	(256 << 10)  /* Reserve 256 kB for Monitor  */
 #  endif
 #else
 #  if defined(DEBUG)
-#    define CFG_MONITOR_LEN	(256 << 10)  /* Reserve 256 kB for Monitor  */
+#    define CONFIG_SYS_MONITOR_LEN	(256 << 10)  /* Reserve 256 kB for Monitor  */
 #  else
-#    define CFG_MONITOR_LEN	(192 << 10)  /* Reserve 192 kB for Monitor  */
+#    define CONFIG_SYS_MONITOR_LEN	(192 << 10)  /* Reserve 192 kB for Monitor  */
 #  endif
 #endif
 
-#define CFG_MONITOR_BASE	CFG_FLASH_BASE
-#define CFG_MALLOC_LEN		(128 << 10)  /* Reserve 128 kB for malloc() */
+#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_FLASH_BASE
+#define CONFIG_SYS_MALLOC_LEN		(128 << 10)  /* Reserve 128 kB for malloc() */
 
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define CFG_BOOTMAPSZ		(8 << 20)    /* Initial Memory map for Linux */
+#define CONFIG_SYS_BOOTMAPSZ		(8 << 20)    /* Initial Memory map for Linux */
 
 /*-----------------------------------------------------------------------
  * FLASH organization
  */
-#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks	     */
-#define CFG_MAX_FLASH_SECT	8	/* max number of sectors on one chip */
+#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks	     */
+#define CONFIG_SYS_MAX_FLASH_SECT	8	/* max number of sectors on one chip */
 
-#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)   */
-#define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)   */
+#define CONFIG_SYS_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)   */
+#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)   */
 
-#if defined(CFG_ENV_IS_IN_FLASH)
-#  define CFG_ENV_OFFSET	0x10000 /* Offset   of Environment Sector    */
-#  define CFG_ENV_SIZE		0x10000 /* Total Size of Environment Sector  */
+#if defined(CONFIG_ENV_IS_IN_FLASH)
+#  define CONFIG_ENV_OFFSET	0x10000 /* Offset   of Environment Sector    */
+#  define CONFIG_ENV_SIZE		0x10000 /* Total Size of Environment Sector  */
 #endif
 
 /*-----------------------------------------------------------------------
  * NVRAM organization
  */
-#define CFG_NVRAM_BASE_ADDR	CFG_NVRAM_BASE /* Base address of NVRAM area */
-#define CFG_NVRAM_SIZE		((128*1024)-8) /* clock regs resident in the */
+#define CONFIG_SYS_NVRAM_BASE_ADDR	CONFIG_SYS_NVRAM_BASE /* Base address of NVRAM area */
+#define CONFIG_SYS_NVRAM_SIZE		((128*1024)-8) /* clock regs resident in the */
 					       /*   8 top NVRAM locations    */
 
-#if defined(CFG_ENV_IS_IN_NVRAM)
-#  define CFG_ENV_ADDR		CFG_NVRAM_BASE /* Base address of NVRAM area */
-#  define CFG_ENV_SIZE		0x4000	/* Total Size of Environment Sector  */
+#if defined(CONFIG_ENV_IS_IN_NVRAM)
+#  define CONFIG_ENV_ADDR		CONFIG_SYS_NVRAM_BASE /* Base address of NVRAM area */
+#  define CONFIG_ENV_SIZE		0x4000	/* Total Size of Environment Sector  */
 #endif
 
 /*-----------------------------------------------------------------------
  * Cache Configuration
  */
-#define CFG_CACHELINE_SIZE	16	/* For all MPC8xx CPUs		     */
+#define CONFIG_SYS_CACHELINE_SIZE	16	/* For all MPC8xx CPUs		     */
 
 #if defined(CONFIG_CMD_KGDB)
-#  define CFG_CACHELINE_SHIFT	 4	/* log base 2 of the above value     */
+#  define CONFIG_SYS_CACHELINE_SHIFT	 4	/* log base 2 of the above value     */
 #endif
 
 /*-----------------------------------------------------------------------
@@ -246,10 +246,10 @@
  * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze
  */
 #if defined(CONFIG_WATCHDOG)
-#  define CFG_SYPCR	(SYPCR_SWTC | SYPCR_BMT	 | SYPCR_BME | SYPCR_SWF | \
+#  define CONFIG_SYS_SYPCR	(SYPCR_SWTC | SYPCR_BMT	 | SYPCR_BME | SYPCR_SWF | \
 			 SYPCR_SWE  | SYPCR_SWRI | SYPCR_SWP)
 #else
-#  define CFG_SYPCR	(SYPCR_SWTC | SYPCR_BMT	 | SYPCR_BME | SYPCR_SWF | \
+#  define CONFIG_SYS_SYPCR	(SYPCR_SWTC | SYPCR_BMT	 | SYPCR_BME | SYPCR_SWF | \
 						   SYPCR_SWP)
 #endif
 
@@ -258,14 +258,14 @@
  *-----------------------------------------------------------------------
  * PCMCIA config., multi-function pin tri-state
  */
-#define CFG_SIUMCR	(SIUMCR_DBGC11)
+#define CONFIG_SYS_SIUMCR	(SIUMCR_DBGC11)
 
 /*-----------------------------------------------------------------------
  * TBSCR - Time Base Status and Control				11-26
  *-----------------------------------------------------------------------
  * Clear Reference Interrupt Status, Timebase freezing enabled
  */
-#define CFG_TBSCR	(TBSCR_REFA | TBSCR_REFB | TBSCR_TBF)
+#define CONFIG_SYS_TBSCR	(TBSCR_REFA | TBSCR_REFB | TBSCR_TBF)
 
 /*-----------------------------------------------------------------------
  * RTCSC - Real-Time Clock Status and Control Register		11-27
@@ -273,14 +273,14 @@
  * Once-per-Second Interrupt, Alarm Interrupt, RTC freezing enabled, RTC
  *  enabled
  */
-#define CFG_RTCSC	(RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE)
+#define CONFIG_SYS_RTCSC	(RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE)
 
 /*-----------------------------------------------------------------------
  * PISCR - Periodic Interrupt Status and Control		11-31
  *-----------------------------------------------------------------------
  * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
  */
-#define CFG_PISCR	(PISCR_PS | PISCR_PITF)
+#define CONFIG_SYS_PISCR	(PISCR_PS | PISCR_PITF)
 
 /*-----------------------------------------------------------------------
  * PLPRCR - PLL, Low-Power, and Reset Control Register		15-30
@@ -288,7 +288,7 @@
  * Reset PLL lock status sticky bit, timer expired status bit and timer
  * interrupt status bit - leave PLL multiplication factor unchanged !
  */
-#define CFG_PLPRCR	(PLPRCR_SPLSS | PLPRCR_TEXPS | PLPRCR_TMIST)
+#define CONFIG_SYS_PLPRCR	(PLPRCR_SPLSS | PLPRCR_TEXPS | PLPRCR_TMIST)
 
 /*-----------------------------------------------------------------------
  * SCCR - System Clock and reset Control Register		15-27
@@ -297,7 +297,7 @@
  * power management and some other internal clocks
  */
 #define SCCR_MASK	 SCCR_EBDF11
-#define CFG_SCCR	(SCCR_TBS     | \
+#define CONFIG_SYS_SCCR	(SCCR_TBS     | \
 			 SCCR_COM00   | SCCR_DFSYNC00 | SCCR_DFBRG00  | \
 			 SCCR_DFNL000 | SCCR_DFNH000  | SCCR_DFLCD000 | \
 			 SCCR_DFALCD00)
@@ -308,9 +308,9 @@
  *
  */
 #ifdef DEBUG
-#  define CFG_DER		0xFFE7400F	/* Debug Enable Register */
+#  define CONFIG_SYS_DER		0xFFE7400F	/* Debug Enable Register */
 #else
-#  define CFG_DER		0
+#  define CONFIG_SYS_DER		0
 #endif
 
 /*
@@ -320,68 +320,68 @@
  * BR0 and OR0 (FLASH)
  */
 
-#define FLASH_BASE0_PRELIM	CFG_FLASH_BASE	/* FLASH bank #0	  */
+#define FLASH_BASE0_PRELIM	CONFIG_SYS_FLASH_BASE	/* FLASH bank #0	  */
 
 /* used to re-map FLASH both when starting from SRAM or FLASH:
  * restrict access enough to keep SRAM working (if any)
  * but not too much to meddle with FLASH accesses
  */
-#define CFG_PRELIM_OR_AM	0xFF000000	/* 16 MB between each CSx */
+#define CONFIG_SYS_PRELIM_OR_AM	0xFF000000	/* 16 MB between each CSx */
 
 /* FLASH timing: ACS = 11, TRLX = 0, CSNT = 0, SCY = 8, EHTR = 0	  */
-#define CFG_OR_TIMING_FLASH	(OR_ACS_DIV2 | OR_BI | OR_SCY_8_CLK)
+#define CONFIG_SYS_OR_TIMING_FLASH	(OR_ACS_DIV2 | OR_BI | OR_SCY_8_CLK)
 
-#define CFG_OR0_PRELIM	(CFG_PRELIM_OR_AM | CFG_OR_TIMING_FLASH)
-#define CFG_BR0_PRELIM	((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_PS_8 | BR_V )
+#define CONFIG_SYS_OR0_PRELIM	(CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_FLASH)
+#define CONFIG_SYS_BR0_PRELIM	((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_PS_8 | BR_V )
 
 /*
  * BR1 and OR1 (SDRAM)
  *
  */
-#define SDRAM_BASE1_PRELIM	CFG_SDRAM_BASE	/* SDRAM bank #0	*/
+#define SDRAM_BASE1_PRELIM	CONFIG_SYS_SDRAM_BASE	/* SDRAM bank #0	*/
 #define SDRAM_MAX_SIZE		0x02000000	/* 32 MB MAX for CS1	*/
 
 /* SDRAM timing:							*/
-#define CFG_OR_TIMING_SDRAM	0x00000000
+#define CONFIG_SYS_OR_TIMING_SDRAM	0x00000000
 
-#define CFG_OR1_PRELIM	((2 * CFG_PRELIM_OR_AM) | CFG_OR_TIMING_SDRAM )
-#define CFG_BR1_PRELIM	((SDRAM_BASE1_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
+#define CONFIG_SYS_OR1_PRELIM	((2 * CONFIG_SYS_PRELIM_OR_AM) | CONFIG_SYS_OR_TIMING_SDRAM )
+#define CONFIG_SYS_BR1_PRELIM	((SDRAM_BASE1_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
 
 /*
  * BR2 and OR2 (NVRAM)
  *
  */
-#define NVRAM_BASE1_PRELIM	CFG_NVRAM_BASE	/* NVRAM bank #0	*/
+#define NVRAM_BASE1_PRELIM	CONFIG_SYS_NVRAM_BASE	/* NVRAM bank #0	*/
 #define NVRAM_MAX_SIZE		0x00020000	/* 128 KB MAX for CS2	*/
 
-#define CFG_OR2_PRELIM		0xFFF80160
-#define CFG_BR2_PRELIM	((NVRAM_BASE1_PRELIM & BR_BA_MSK) | BR_PS_8 | BR_V )
+#define CONFIG_SYS_OR2_PRELIM		0xFFF80160
+#define CONFIG_SYS_BR2_PRELIM	((NVRAM_BASE1_PRELIM & BR_BA_MSK) | BR_PS_8 | BR_V )
 
 /*
  * Memory Periodic Timer Prescaler
  */
 
 /* periodic timer for refresh */
-#define CFG_MAMR_PTA		97     /* start with divider for 100 MHz */
+#define CONFIG_SYS_MAMR_PTA		97     /* start with divider for 100 MHz */
 
 /* refresh rate 15.6 us (= 64 ms / 4K = 62.4 / quad bursts) for <= 128 MBit */
-#define CFG_MPTPR_2BK_4K	MPTPR_PTP_DIV16	  /* setting for 2 banks */
-#define CFG_MPTPR_1BK_4K	MPTPR_PTP_DIV32	  /* setting for 1 bank	 */
+#define CONFIG_SYS_MPTPR_2BK_4K	MPTPR_PTP_DIV16	  /* setting for 2 banks */
+#define CONFIG_SYS_MPTPR_1BK_4K	MPTPR_PTP_DIV32	  /* setting for 1 bank	 */
 
 /* refresh rate 7.8 us (= 64 ms / 8K = 31.2 / quad bursts) for 256 MBit	 */
-#define CFG_MPTPR_2BK_8K	MPTPR_PTP_DIV8	  /* setting for 2 banks */
-#define CFG_MPTPR_1BK_8K	MPTPR_PTP_DIV16	  /* setting for 1 bank	 */
+#define CONFIG_SYS_MPTPR_2BK_8K	MPTPR_PTP_DIV8	  /* setting for 2 banks */
+#define CONFIG_SYS_MPTPR_1BK_8K	MPTPR_PTP_DIV16	  /* setting for 1 bank	 */
 
 /*
  * MAMR settings for SDRAM
  */
 
 /* 8 column SDRAM */
-#define CFG_MAMR_8COL	((CFG_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    | \
+#define CONFIG_SYS_MAMR_8COL	((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    | \
 			 MAMR_AMA_TYPE_0 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A11 | \
 			 MAMR_RLFA_1X	 | MAMR_WLFA_1X	   | MAMR_TLFA_4X)
 /* 9 column SDRAM */
-#define CFG_MAMR_9COL	((CFG_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    | \
+#define CONFIG_SYS_MAMR_9COL	((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    | \
 			 MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 | \
 			 MAMR_RLFA_1X	 | MAMR_WLFA_1X	   | MAMR_TLFA_4X)
 
diff --git a/include/configs/EP1C20.h b/include/configs/EP1C20.h
index cfa633592..a0904d464 100644
--- a/include/configs/EP1C20.h
+++ b/include/configs/EP1C20.h
@@ -30,29 +30,29 @@
 #define CONFIG_EP1C20		1		/* EP1C20 board		*/
 #define CONFIG_SYS_CLK_FREQ	50000000	/* 50 MHz core clk	*/
 
-#define CFG_RESET_ADDR		0x00000000	/* Hard-reset address	*/
-#define CFG_EXCEPTION_ADDR	0x01000020	/* Exception entry point*/
-#define CFG_NIOS_SYSID_BASE	0x021208b8	/* System id address	*/
+#define CONFIG_SYS_RESET_ADDR		0x00000000	/* Hard-reset address	*/
+#define CONFIG_SYS_EXCEPTION_ADDR	0x01000020	/* Exception entry point*/
+#define CONFIG_SYS_NIOS_SYSID_BASE	0x021208b8	/* System id address	*/
 #define CONFIG_BOARD_EARLY_INIT_F 1	/* enable early board-spec. init*/
 
 /*------------------------------------------------------------------------
  * CACHE -- the following will support II/s and II/f. The II/s does not
  * have dcache, so the cache instructions will behave as NOPs.
  *----------------------------------------------------------------------*/
-#define CFG_ICACHE_SIZE		4096		/* 4 KByte total	*/
-#define CFG_ICACHELINE_SIZE	32		/* 32 bytes/line	*/
-#define CFG_DCACHE_SIZE		2048		/* 2 KByte (II/f)	*/
-#define CFG_DCACHELINE_SIZE	4		/* 4 bytes/line (II/f)	*/
+#define CONFIG_SYS_ICACHE_SIZE		4096		/* 4 KByte total	*/
+#define CONFIG_SYS_ICACHELINE_SIZE	32		/* 32 bytes/line	*/
+#define CONFIG_SYS_DCACHE_SIZE		2048		/* 2 KByte (II/f)	*/
+#define CONFIG_SYS_DCACHELINE_SIZE	4		/* 4 bytes/line (II/f)	*/
 
 /*------------------------------------------------------------------------
  * MEMORY BASE ADDRESSES
  *----------------------------------------------------------------------*/
-#define CFG_FLASH_BASE		0x00000000	/* FLASH base addr	*/
-#define CFG_FLASH_SIZE		0x00800000	/* 8 MByte		*/
-#define CFG_SDRAM_BASE		0x01000000	/* SDRAM base addr	*/
-#define CFG_SDRAM_SIZE		0x01000000	/* 16 MByte		*/
-#define CFG_SRAM_BASE		0x02000000	/* SRAM base addr	*/
-#define CFG_SRAM_SIZE		0x00100000	/* 1 MB (only 1M mapped)*/
+#define CONFIG_SYS_FLASH_BASE		0x00000000	/* FLASH base addr	*/
+#define CONFIG_SYS_FLASH_SIZE		0x00800000	/* 8 MByte		*/
+#define CONFIG_SYS_SDRAM_BASE		0x01000000	/* SDRAM base addr	*/
+#define CONFIG_SYS_SDRAM_SIZE		0x01000000	/* 16 MByte		*/
+#define CONFIG_SYS_SRAM_BASE		0x02000000	/* SRAM base addr	*/
+#define CONFIG_SYS_SRAM_SIZE		0x00100000	/* 1 MB (only 1M mapped)*/
 
 /*------------------------------------------------------------------------
  * MEMORY ORGANIZATION
@@ -61,58 +61,58 @@
  *	-Global data is placed below the heap.
  *	-The stack is placed below global data (&grows down).
  *----------------------------------------------------------------------*/
-#define CFG_MONITOR_LEN		(256 * 1024)	/* Reserve 128k		*/
-#define CFG_GBL_DATA_SIZE	128		/* Global data size rsvd*/
-#define CFG_MALLOC_LEN		(CFG_ENV_SIZE + 128*1024)
+#define CONFIG_SYS_MONITOR_LEN		(256 * 1024)	/* Reserve 128k		*/
+#define CONFIG_SYS_GBL_DATA_SIZE	128		/* Global data size rsvd*/
+#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + 128*1024)
 
-#define CFG_MONITOR_BASE	TEXT_BASE
-#define CFG_MALLOC_BASE		(CFG_MONITOR_BASE - CFG_MALLOC_LEN)
-#define CFG_GBL_DATA_OFFSET	(CFG_MALLOC_BASE - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP		CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_MONITOR_BASE	TEXT_BASE
+#define CONFIG_SYS_MALLOC_BASE		(CONFIG_SYS_MONITOR_BASE - CONFIG_SYS_MALLOC_LEN)
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_MALLOC_BASE - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP		CONFIG_SYS_GBL_DATA_OFFSET
 
 /*------------------------------------------------------------------------
  * FLASH (AM29LV065D)
  *----------------------------------------------------------------------*/
-#define CFG_MAX_FLASH_SECT	128		/* Max # sects per bank */
-#define CFG_MAX_FLASH_BANKS	1		/* Max # of flash banks */
-#define CFG_FLASH_ERASE_TOUT	8000		/* Erase timeout (msec) */
-#define CFG_FLASH_WRITE_TOUT	100		/* Write timeout (msec) */
-#define CFG_FLASH_WORD_SIZE	unsigned char	/* flash word size	*/
+#define CONFIG_SYS_MAX_FLASH_SECT	128		/* Max # sects per bank */
+#define CONFIG_SYS_MAX_FLASH_BANKS	1		/* Max # of flash banks */
+#define CONFIG_SYS_FLASH_ERASE_TOUT	8000		/* Erase timeout (msec) */
+#define CONFIG_SYS_FLASH_WRITE_TOUT	100		/* Write timeout (msec) */
+#define CONFIG_SYS_FLASH_WORD_SIZE	unsigned char	/* flash word size	*/
 
 /*------------------------------------------------------------------------
- * ENVIRONMENT -- Put environment in sector CFG_MONITOR_LEN above
- * CFG_RESET_ADDR, since we assume the monitor is stored at the
+ * ENVIRONMENT -- Put environment in sector CONFIG_SYS_MONITOR_LEN above
+ * CONFIG_SYS_RESET_ADDR, since we assume the monitor is stored at the
  * reset address, no? This will keep the environment in user region
  * of flash. NOTE: the monitor length must be multiple of sector size
  * (which is common practice).
  *----------------------------------------------------------------------*/
-#define CFG_ENV_IS_IN_FLASH	1		/* Environment in flash */
-#define CFG_ENV_SIZE		(64 * 1024)	/* 64 KByte (1 sector)	*/
+#define CONFIG_ENV_IS_IN_FLASH	1		/* Environment in flash */
+#define CONFIG_ENV_SIZE		(64 * 1024)	/* 64 KByte (1 sector)	*/
 #define CONFIG_ENV_OVERWRITE			/* Serial change Ok	*/
-#define CFG_ENV_ADDR	(CFG_RESET_ADDR + CFG_MONITOR_LEN)
+#define CONFIG_ENV_ADDR	(CONFIG_SYS_RESET_ADDR + CONFIG_SYS_MONITOR_LEN)
 
 /*------------------------------------------------------------------------
  * CONSOLE
  *----------------------------------------------------------------------*/
 #if defined(CONFIG_CONSOLE_JTAG)
-#define CFG_NIOS_CONSOLE	0x021208b0	/* JTAG UART base addr	*/
+#define CONFIG_SYS_NIOS_CONSOLE	0x021208b0	/* JTAG UART base addr	*/
 #else
-#define CFG_NIOS_CONSOLE	0x02120840	/* UART base addr	*/
+#define CONFIG_SYS_NIOS_CONSOLE	0x02120840	/* UART base addr	*/
 #endif
 
-#define CFG_NIOS_FIXEDBAUD	1		/* Baudrate is fixed	*/
+#define CONFIG_SYS_NIOS_FIXEDBAUD	1		/* Baudrate is fixed	*/
 #define CONFIG_BAUDRATE		115200		/* Initial baudrate	*/
-#define CFG_BAUDRATE_TABLE	{115200}	/* It's fixed ;-)	*/
+#define CONFIG_SYS_BAUDRATE_TABLE	{115200}	/* It's fixed ;-)	*/
 
-#define CFG_CONSOLE_INFO_QUIET	1		/* Suppress console info*/
+#define CONFIG_SYS_CONSOLE_INFO_QUIET	1		/* Suppress console info*/
 
 /*------------------------------------------------------------------------
- * EPCS Device -- wne CFG_NIOS_EPCSBASE is defined code/commands for
+ * EPCS Device -- wne CONFIG_SYS_NIOS_EPCSBASE is defined code/commands for
  * epcs device access is enabled. The base address is the epcs
  * _register_ base address, NOT THE ADDRESS OF THE MEMORY BLOCK.
  * The register base is currently at offset 0x600 from the memory base.
  *----------------------------------------------------------------------*/
-#define CFG_NIOS_EPCSBASE	0x02100200	/* EPCS register base	*/
+#define CONFIG_SYS_NIOS_EPCSBASE	0x02100200	/* EPCS register base	*/
 
 /*------------------------------------------------------------------------
  * DEBUG
@@ -126,23 +126,23 @@
  * registers, we can slow it down to 10 msec using TMRCNT. If the default
  * period is acceptable, TMRCNT can be left undefined.
  *----------------------------------------------------------------------*/
-#define CFG_NIOS_TMRBASE	0x02120820	/* Tick timer base addr */
-#define CFG_NIOS_TMRIRQ		3		/* Timer IRQ num	*/
-#define CFG_NIOS_TMRMS		10		/* 10 msec per tick	*/
-#define CFG_NIOS_TMRCNT (CFG_NIOS_TMRMS * (CONFIG_SYS_CLK_FREQ/1000))
-#define CFG_HZ		(CONFIG_SYS_CLK_FREQ/(CFG_NIOS_TMRCNT + 1))
+#define CONFIG_SYS_NIOS_TMRBASE	0x02120820	/* Tick timer base addr */
+#define CONFIG_SYS_NIOS_TMRIRQ		3		/* Timer IRQ num	*/
+#define CONFIG_SYS_NIOS_TMRMS		10		/* 10 msec per tick	*/
+#define CONFIG_SYS_NIOS_TMRCNT (CONFIG_SYS_NIOS_TMRMS * (CONFIG_SYS_CLK_FREQ/1000))
+#define CONFIG_SYS_HZ		(CONFIG_SYS_CLK_FREQ/(CONFIG_SYS_NIOS_TMRCNT + 1))
 
 /*------------------------------------------------------------------------
  * STATUS LED -- Provides a simple blinking led. For Nios2 each board
  * must implement its own led routines -- leds are, after all,
  * board-specific, no?
  *----------------------------------------------------------------------*/
-#define CFG_LEDPIO_ADDR		0x02120870	/* LED PIO base addr	*/
+#define CONFIG_SYS_LEDPIO_ADDR		0x02120870	/* LED PIO base addr	*/
 #define CONFIG_STATUS_LED			/* Enable status driver */
 
 #define STATUS_LED_BIT		1		/* Bit-0 on PIO		*/
 #define STATUS_LED_STATE	1		/* Blinking		*/
-#define STATUS_LED_PERIOD	(500/CFG_NIOS_TMRMS) /* Every 500 msec	*/
+#define STATUS_LED_PERIOD	(500/CONFIG_SYS_NIOS_TMRMS) /* Every 500 msec	*/
 
 /*------------------------------------------------------------------------
  * ETHERNET -- The header file for the SMC91111 driver hurts my eyes ...
@@ -194,17 +194,17 @@
 /*------------------------------------------------------------------------
  * MISC
  *----------------------------------------------------------------------*/
-#define CFG_LONGHELP				/* Provide extended help*/
-#define CFG_PROMPT		"==> "		/* Command prompt	*/
-#define CFG_CBSIZE		256		/* Console I/O buf size */
-#define CFG_MAXARGS		16		/* Max command args	*/
-#define CFG_BARGSIZE		CFG_CBSIZE	/* Boot arg buf size	*/
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print buf size */
-#define CFG_LOAD_ADDR		CFG_SDRAM_BASE	/* Default load address */
-#define CFG_MEMTEST_START	CFG_SDRAM_BASE	/* Start addr for test	*/
-#define CFG_MEMTEST_END		CFG_INIT_SP - 0x00020000
-
-#define CFG_HUSH_PARSER
-#define CFG_PROMPT_HUSH_PS2	"> "
+#define CONFIG_SYS_LONGHELP				/* Provide extended help*/
+#define CONFIG_SYS_PROMPT		"==> "		/* Command prompt	*/
+#define CONFIG_SYS_CBSIZE		256		/* Console I/O buf size */
+#define CONFIG_SYS_MAXARGS		16		/* Max command args	*/
+#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot arg buf size	*/
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print buf size */
+#define CONFIG_SYS_LOAD_ADDR		CONFIG_SYS_SDRAM_BASE	/* Default load address */
+#define CONFIG_SYS_MEMTEST_START	CONFIG_SYS_SDRAM_BASE	/* Start addr for test	*/
+#define CONFIG_SYS_MEMTEST_END		CONFIG_SYS_INIT_SP - 0x00020000
+
+#define CONFIG_SYS_HUSH_PARSER
+#define CONFIG_SYS_PROMPT_HUSH_PS2	"> "
 
 #endif	/* __CONFIG_H */
diff --git a/include/configs/EP1S10.h b/include/configs/EP1S10.h
index 7c526f759..63a0d3d6a 100644
--- a/include/configs/EP1S10.h
+++ b/include/configs/EP1S10.h
@@ -30,28 +30,28 @@
 #define CONFIG_EP1S10		1		/* EP1S10 board		*/
 #define CONFIG_SYS_CLK_FREQ	50000000	/* 50 MHz core clk	*/
 
-#define CFG_RESET_ADDR		0x00000000	/* Hard-reset address	*/
-#define CFG_EXCEPTION_ADDR	0x01000020	/* Exception entry point*/
-#define CFG_NIOS_SYSID_BASE	0x021208b8	/* System id address	*/
+#define CONFIG_SYS_RESET_ADDR		0x00000000	/* Hard-reset address	*/
+#define CONFIG_SYS_EXCEPTION_ADDR	0x01000020	/* Exception entry point*/
+#define CONFIG_SYS_NIOS_SYSID_BASE	0x021208b8	/* System id address	*/
 
 /*------------------------------------------------------------------------
  * CACHE -- the following will support II/s and II/f. The II/s does not
  * have dcache, so the cache instructions will behave as NOPs.
  *----------------------------------------------------------------------*/
-#define CFG_ICACHE_SIZE		4096		/* 4 KByte total	*/
-#define CFG_ICACHELINE_SIZE	32		/* 32 bytes/line	*/
-#define CFG_DCACHE_SIZE		2048		/* 2 KByte (II/f)	*/
-#define CFG_DCACHELINE_SIZE	4		/* 4 bytes/line (II/f)	*/
+#define CONFIG_SYS_ICACHE_SIZE		4096		/* 4 KByte total	*/
+#define CONFIG_SYS_ICACHELINE_SIZE	32		/* 32 bytes/line	*/
+#define CONFIG_SYS_DCACHE_SIZE		2048		/* 2 KByte (II/f)	*/
+#define CONFIG_SYS_DCACHELINE_SIZE	4		/* 4 bytes/line (II/f)	*/
 
 /*------------------------------------------------------------------------
  * MEMORY BASE ADDRESSES
  *----------------------------------------------------------------------*/
-#define CFG_FLASH_BASE		0x00000000	/* FLASH base addr	*/
-#define CFG_FLASH_SIZE		0x00800000	/* 8 MByte		*/
-#define CFG_SDRAM_BASE		0x01000000	/* SDRAM base addr	*/
-#define CFG_SDRAM_SIZE		0x01000000	/* 16 MByte		*/
-#define CFG_SRAM_BASE		0x02000000	/* SRAM base addr	*/
-#define CFG_SRAM_SIZE		0x00100000	/* 1 MB			*/
+#define CONFIG_SYS_FLASH_BASE		0x00000000	/* FLASH base addr	*/
+#define CONFIG_SYS_FLASH_SIZE		0x00800000	/* 8 MByte		*/
+#define CONFIG_SYS_SDRAM_BASE		0x01000000	/* SDRAM base addr	*/
+#define CONFIG_SYS_SDRAM_SIZE		0x01000000	/* 16 MByte		*/
+#define CONFIG_SYS_SRAM_BASE		0x02000000	/* SRAM base addr	*/
+#define CONFIG_SYS_SRAM_SIZE		0x00100000	/* 1 MB			*/
 
 /*------------------------------------------------------------------------
  * MEMORY ORGANIZATION
@@ -60,54 +60,54 @@
  *	-Global data is placed below the heap.
  *	-The stack is placed below global data (&grows down).
  *----------------------------------------------------------------------*/
-#define CFG_MONITOR_LEN		(256 * 1024)	/* Reserve 256k		*/
-#define CFG_GBL_DATA_SIZE	128		/* Global data size rsvd*/
-#define CFG_MALLOC_LEN		(CFG_ENV_SIZE + 256*1024) /* 256k heap */
+#define CONFIG_SYS_MONITOR_LEN		(256 * 1024)	/* Reserve 256k		*/
+#define CONFIG_SYS_GBL_DATA_SIZE	128		/* Global data size rsvd*/
+#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + 256*1024) /* 256k heap */
 
-#define CFG_MONITOR_BASE	TEXT_BASE
-#define CFG_MALLOC_BASE		(CFG_MONITOR_BASE - CFG_MALLOC_LEN)
-#define CFG_GBL_DATA_OFFSET	(CFG_MALLOC_BASE - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP		CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_MONITOR_BASE	TEXT_BASE
+#define CONFIG_SYS_MALLOC_BASE		(CONFIG_SYS_MONITOR_BASE - CONFIG_SYS_MALLOC_LEN)
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_MALLOC_BASE - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP		CONFIG_SYS_GBL_DATA_OFFSET
 
 /*------------------------------------------------------------------------
  * FLASH (AM29LV065D)
  *----------------------------------------------------------------------*/
-#define CFG_MAX_FLASH_SECT	128		/* Max # sects per bank */
-#define CFG_MAX_FLASH_BANKS	1		/* Max # of flash banks */
-#define CFG_FLASH_ERASE_TOUT	8000		/* Erase timeout (msec) */
-#define CFG_FLASH_WRITE_TOUT	100		/* Write timeout (msec) */
+#define CONFIG_SYS_MAX_FLASH_SECT	128		/* Max # sects per bank */
+#define CONFIG_SYS_MAX_FLASH_BANKS	1		/* Max # of flash banks */
+#define CONFIG_SYS_FLASH_ERASE_TOUT	8000		/* Erase timeout (msec) */
+#define CONFIG_SYS_FLASH_WRITE_TOUT	100		/* Write timeout (msec) */
 
 /*------------------------------------------------------------------------
- * ENVIRONMENT -- Put environment in sector CFG_MONITOR_LEN above
- * CFG_FLASH_BASE, since we assume that u-boot is stored at the bottom
+ * ENVIRONMENT -- Put environment in sector CONFIG_SYS_MONITOR_LEN above
+ * CONFIG_SYS_FLASH_BASE, since we assume that u-boot is stored at the bottom
  * of flash memory. This will keep the environment in user region
  * of flash. NOTE: the monitor length must be multiple of sector size
  * (which is common practice).
  *----------------------------------------------------------------------*/
-#define CFG_ENV_IS_IN_FLASH	1		/* Environment in flash */
-#define CFG_ENV_SIZE		(64 * 1024)	/* 64 KByte (1 sector)	*/
+#define CONFIG_ENV_IS_IN_FLASH	1		/* Environment in flash */
+#define CONFIG_ENV_SIZE		(64 * 1024)	/* 64 KByte (1 sector)	*/
 #define CONFIG_ENV_OVERWRITE			/* Serial change Ok	*/
-#define CFG_ENV_ADDR	(CFG_FLASH_BASE + CFG_MONITOR_LEN)
+#define CONFIG_ENV_ADDR	(CONFIG_SYS_FLASH_BASE + CONFIG_SYS_MONITOR_LEN)
 
 /*------------------------------------------------------------------------
  * CONSOLE
  *----------------------------------------------------------------------*/
 #if defined(CONFIG_CONSOLE_JTAG)
-#define CFG_NIOS_CONSOLE	0x021208b0	/* JTAG UART base addr	*/
+#define CONFIG_SYS_NIOS_CONSOLE	0x021208b0	/* JTAG UART base addr	*/
 #else
-#define CFG_NIOS_CONSOLE	0x02120840	/* UART base addr	*/
+#define CONFIG_SYS_NIOS_CONSOLE	0x02120840	/* UART base addr	*/
 #endif
 
-#define CFG_NIOS_FIXEDBAUD	1		/* Baudrate is fixed	*/
+#define CONFIG_SYS_NIOS_FIXEDBAUD	1		/* Baudrate is fixed	*/
 #define CONFIG_BAUDRATE		115200		/* Initial baudrate	*/
-#define CFG_BAUDRATE_TABLE	{115200}	/* It's fixed ;-)	*/
+#define CONFIG_SYS_BAUDRATE_TABLE	{115200}	/* It's fixed ;-)	*/
 
-#define CFG_CONSOLE_INFO_QUIET	1		/* Suppress console info*/
+#define CONFIG_SYS_CONSOLE_INFO_QUIET	1		/* Suppress console info*/
 
 /*------------------------------------------------------------------------
  * EPCS Device -- None for stratix.
  *----------------------------------------------------------------------*/
-#undef CFG_NIOS_EPCSBASE
+#undef CONFIG_SYS_NIOS_EPCSBASE
 
 /*------------------------------------------------------------------------
  * DEBUG
@@ -121,22 +121,22 @@
  * registers, we can slow it down to 10 msec using TMRCNT. If the default
  * period is acceptable, TMRCNT can be left undefined.
  *----------------------------------------------------------------------*/
-#define CFG_NIOS_TMRBASE	0x02120820	/* Tick timer base addr */
-#define CFG_NIOS_TMRIRQ		3		/* Timer IRQ num	*/
-#define CFG_NIOS_TMRMS		10		/* 10 msec per tick	*/
-#define CFG_NIOS_TMRCNT (CFG_NIOS_TMRMS * (CONFIG_SYS_CLK_FREQ/1000))
-#define CFG_HZ		(CONFIG_SYS_CLK_FREQ/(CFG_NIOS_TMRCNT + 1))
+#define CONFIG_SYS_NIOS_TMRBASE	0x02120820	/* Tick timer base addr */
+#define CONFIG_SYS_NIOS_TMRIRQ		3		/* Timer IRQ num	*/
+#define CONFIG_SYS_NIOS_TMRMS		10		/* 10 msec per tick	*/
+#define CONFIG_SYS_NIOS_TMRCNT (CONFIG_SYS_NIOS_TMRMS * (CONFIG_SYS_CLK_FREQ/1000))
+#define CONFIG_SYS_HZ		(CONFIG_SYS_CLK_FREQ/(CONFIG_SYS_NIOS_TMRCNT + 1))
 
 /*------------------------------------------------------------------------
  * STATUS LED -- Provides a simple blinking led. For Nios2 each board
  * must implement its own led routines -- since leds are board-specific.
  *----------------------------------------------------------------------*/
-#define CFG_LEDPIO_ADDR		0x02120870	/* LED PIO base addr	*/
+#define CONFIG_SYS_LEDPIO_ADDR		0x02120870	/* LED PIO base addr	*/
 #define CONFIG_STATUS_LED			/* Enable status driver */
 
 #define STATUS_LED_BIT		1		/* Bit-0 on PIO		*/
 #define STATUS_LED_STATE	1		/* Blinking		*/
-#define STATUS_LED_PERIOD	(500/CFG_NIOS_TMRMS) /* Every 500 msec	*/
+#define STATUS_LED_PERIOD	(500/CONFIG_SYS_NIOS_TMRMS) /* Every 500 msec	*/
 
 /*------------------------------------------------------------------------
  * ETHERNET -- The header file for the SMC91111 driver hurts my eyes ...
@@ -187,17 +187,17 @@
 /*------------------------------------------------------------------------
  * MISC
  *----------------------------------------------------------------------*/
-#define CFG_LONGHELP				/* Provide extended help*/
-#define CFG_PROMPT		"==> "		/* Command prompt	*/
-#define CFG_CBSIZE		256		/* Console I/O buf size */
-#define CFG_MAXARGS		16		/* Max command args	*/
-#define CFG_BARGSIZE		CFG_CBSIZE	/* Boot arg buf size	*/
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print buf size */
-#define CFG_LOAD_ADDR		CFG_SDRAM_BASE	/* Default load address */
-#define CFG_MEMTEST_START	CFG_SDRAM_BASE	/* Start addr for test	*/
-#define CFG_MEMTEST_END		CFG_INIT_SP - 0x00020000
-
-#define CFG_HUSH_PARSER
-#define CFG_PROMPT_HUSH_PS2	"> "
+#define CONFIG_SYS_LONGHELP				/* Provide extended help*/
+#define CONFIG_SYS_PROMPT		"==> "		/* Command prompt	*/
+#define CONFIG_SYS_CBSIZE		256		/* Console I/O buf size */
+#define CONFIG_SYS_MAXARGS		16		/* Max command args	*/
+#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot arg buf size	*/
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print buf size */
+#define CONFIG_SYS_LOAD_ADDR		CONFIG_SYS_SDRAM_BASE	/* Default load address */
+#define CONFIG_SYS_MEMTEST_START	CONFIG_SYS_SDRAM_BASE	/* Start addr for test	*/
+#define CONFIG_SYS_MEMTEST_END		CONFIG_SYS_INIT_SP - 0x00020000
+
+#define CONFIG_SYS_HUSH_PARSER
+#define CONFIG_SYS_PROMPT_HUSH_PS2	"> "
 
 #endif	/* __CONFIG_H */
diff --git a/include/configs/EP1S40.h b/include/configs/EP1S40.h
index 1fe8f68c2..36e1f8173 100644
--- a/include/configs/EP1S40.h
+++ b/include/configs/EP1S40.h
@@ -30,28 +30,28 @@
 #define CONFIG_EP1S40		1		/* EP1S40 board		*/
 #define CONFIG_SYS_CLK_FREQ	50000000	/* 50 MHz core clk	*/
 
-#define CFG_RESET_ADDR		0x00000000	/* Hard-reset address	*/
-#define CFG_EXCEPTION_ADDR	0x01000020	/* Exception entry point*/
-#define CFG_NIOS_SYSID_BASE	0x021208b8	/* System id address	*/
+#define CONFIG_SYS_RESET_ADDR		0x00000000	/* Hard-reset address	*/
+#define CONFIG_SYS_EXCEPTION_ADDR	0x01000020	/* Exception entry point*/
+#define CONFIG_SYS_NIOS_SYSID_BASE	0x021208b8	/* System id address	*/
 
 /*------------------------------------------------------------------------
  * CACHE -- the following will support II/s and II/f. The II/s does not
  * have dcache, so the cache instructions will behave as NOPs.
  *----------------------------------------------------------------------*/
-#define CFG_ICACHE_SIZE		4096		/* 4 KByte total	*/
-#define CFG_ICACHELINE_SIZE	32		/* 32 bytes/line	*/
-#define CFG_DCACHE_SIZE		2048		/* 2 KByte (II/f)	*/
-#define CFG_DCACHELINE_SIZE	4		/* 4 bytes/line (II/f)	*/
+#define CONFIG_SYS_ICACHE_SIZE		4096		/* 4 KByte total	*/
+#define CONFIG_SYS_ICACHELINE_SIZE	32		/* 32 bytes/line	*/
+#define CONFIG_SYS_DCACHE_SIZE		2048		/* 2 KByte (II/f)	*/
+#define CONFIG_SYS_DCACHELINE_SIZE	4		/* 4 bytes/line (II/f)	*/
 
 /*------------------------------------------------------------------------
  * MEMORY BASE ADDRESSES
  *----------------------------------------------------------------------*/
-#define CFG_FLASH_BASE		0x00000000	/* FLASH base addr	*/
-#define CFG_FLASH_SIZE		0x00800000	/* 8 MByte		*/
-#define CFG_SDRAM_BASE		0x01000000	/* SDRAM base addr	*/
-#define CFG_SDRAM_SIZE		0x01000000	/* 16 MByte		*/
-#define CFG_SRAM_BASE		0x02000000	/* SRAM base addr	*/
-#define CFG_SRAM_SIZE		0x00100000	/* 1 MB			*/
+#define CONFIG_SYS_FLASH_BASE		0x00000000	/* FLASH base addr	*/
+#define CONFIG_SYS_FLASH_SIZE		0x00800000	/* 8 MByte		*/
+#define CONFIG_SYS_SDRAM_BASE		0x01000000	/* SDRAM base addr	*/
+#define CONFIG_SYS_SDRAM_SIZE		0x01000000	/* 16 MByte		*/
+#define CONFIG_SYS_SRAM_BASE		0x02000000	/* SRAM base addr	*/
+#define CONFIG_SYS_SRAM_SIZE		0x00100000	/* 1 MB			*/
 
 /*------------------------------------------------------------------------
  * MEMORY ORGANIZATION
@@ -60,54 +60,54 @@
  *	-Global data is placed below the heap.
  *	-The stack is placed below global data (&grows down).
  *----------------------------------------------------------------------*/
-#define CFG_MONITOR_LEN		(256 * 1024)	/* Reserve 256k		*/
-#define CFG_GBL_DATA_SIZE	128		/* Global data size rsvd*/
-#define CFG_MALLOC_LEN		(CFG_ENV_SIZE + 256*1024) /* 256k heap */
+#define CONFIG_SYS_MONITOR_LEN		(256 * 1024)	/* Reserve 256k		*/
+#define CONFIG_SYS_GBL_DATA_SIZE	128		/* Global data size rsvd*/
+#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + 256*1024) /* 256k heap */
 
-#define CFG_MONITOR_BASE	TEXT_BASE
-#define CFG_MALLOC_BASE		(CFG_MONITOR_BASE - CFG_MALLOC_LEN)
-#define CFG_GBL_DATA_OFFSET	(CFG_MALLOC_BASE - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP		CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_MONITOR_BASE	TEXT_BASE
+#define CONFIG_SYS_MALLOC_BASE		(CONFIG_SYS_MONITOR_BASE - CONFIG_SYS_MALLOC_LEN)
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_MALLOC_BASE - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP		CONFIG_SYS_GBL_DATA_OFFSET
 
 /*------------------------------------------------------------------------
  * FLASH (AM29LV065D)
  *----------------------------------------------------------------------*/
-#define CFG_MAX_FLASH_SECT	128		/* Max # sects per bank */
-#define CFG_MAX_FLASH_BANKS	1		/* Max # of flash banks */
-#define CFG_FLASH_ERASE_TOUT	8000		/* Erase timeout (msec) */
-#define CFG_FLASH_WRITE_TOUT	100		/* Write timeout (msec) */
+#define CONFIG_SYS_MAX_FLASH_SECT	128		/* Max # sects per bank */
+#define CONFIG_SYS_MAX_FLASH_BANKS	1		/* Max # of flash banks */
+#define CONFIG_SYS_FLASH_ERASE_TOUT	8000		/* Erase timeout (msec) */
+#define CONFIG_SYS_FLASH_WRITE_TOUT	100		/* Write timeout (msec) */
 
 /*------------------------------------------------------------------------
- * ENVIRONMENT -- Put environment in sector CFG_MONITOR_LEN above
- * CFG_FLASH_BASE, since we assume that u-boot is stored at the bottom
+ * ENVIRONMENT -- Put environment in sector CONFIG_SYS_MONITOR_LEN above
+ * CONFIG_SYS_FLASH_BASE, since we assume that u-boot is stored at the bottom
  * of flash memory. This will keep the environment in user region
  * of flash. NOTE: the monitor length must be multiple of sector size
  * (which is common practice).
  *----------------------------------------------------------------------*/
-#define CFG_ENV_IS_IN_FLASH	1		/* Environment in flash */
-#define CFG_ENV_SIZE		(64 * 1024)	/* 64 KByte (1 sector)	*/
+#define CONFIG_ENV_IS_IN_FLASH	1		/* Environment in flash */
+#define CONFIG_ENV_SIZE		(64 * 1024)	/* 64 KByte (1 sector)	*/
 #define CONFIG_ENV_OVERWRITE			/* Serial change Ok	*/
-#define CFG_ENV_ADDR	(CFG_FLASH_BASE + CFG_MONITOR_LEN)
+#define CONFIG_ENV_ADDR	(CONFIG_SYS_FLASH_BASE + CONFIG_SYS_MONITOR_LEN)
 
 /*------------------------------------------------------------------------
  * CONSOLE
  *----------------------------------------------------------------------*/
 #if defined(CONFIG_CONSOLE_JTAG)
-#define CFG_NIOS_CONSOLE	0x021208b0	/* JTAG UART base addr	*/
+#define CONFIG_SYS_NIOS_CONSOLE	0x021208b0	/* JTAG UART base addr	*/
 #else
-#define CFG_NIOS_CONSOLE	0x02120840	/* UART base addr	*/
+#define CONFIG_SYS_NIOS_CONSOLE	0x02120840	/* UART base addr	*/
 #endif
 
-#define CFG_NIOS_FIXEDBAUD	1		/* Baudrate is fixed	*/
+#define CONFIG_SYS_NIOS_FIXEDBAUD	1		/* Baudrate is fixed	*/
 #define CONFIG_BAUDRATE		115200		/* Initial baudrate	*/
-#define CFG_BAUDRATE_TABLE	{115200}	/* It's fixed ;-)	*/
+#define CONFIG_SYS_BAUDRATE_TABLE	{115200}	/* It's fixed ;-)	*/
 
-#define CFG_CONSOLE_INFO_QUIET	1		/* Suppress console info*/
+#define CONFIG_SYS_CONSOLE_INFO_QUIET	1		/* Suppress console info*/
 
 /*------------------------------------------------------------------------
  * EPCS Device -- None for stratix.
  *----------------------------------------------------------------------*/
-#undef CFG_NIOS_EPCSBASE
+#undef CONFIG_SYS_NIOS_EPCSBASE
 
 /*------------------------------------------------------------------------
  * DEBUG
@@ -121,22 +121,22 @@
  * registers, we can slow it down to 10 msec using TMRCNT. If the default
  * period is acceptable, TMRCNT can be left undefined.
  *----------------------------------------------------------------------*/
-#define CFG_NIOS_TMRBASE	0x02120820	/* Tick timer base addr */
-#define CFG_NIOS_TMRIRQ		3		/* Timer IRQ num	*/
-#define CFG_NIOS_TMRMS		10		/* 10 msec per tick	*/
-#define CFG_NIOS_TMRCNT (CFG_NIOS_TMRMS * (CONFIG_SYS_CLK_FREQ/1000))
-#define CFG_HZ		(CONFIG_SYS_CLK_FREQ/(CFG_NIOS_TMRCNT + 1))
+#define CONFIG_SYS_NIOS_TMRBASE	0x02120820	/* Tick timer base addr */
+#define CONFIG_SYS_NIOS_TMRIRQ		3		/* Timer IRQ num	*/
+#define CONFIG_SYS_NIOS_TMRMS		10		/* 10 msec per tick	*/
+#define CONFIG_SYS_NIOS_TMRCNT (CONFIG_SYS_NIOS_TMRMS * (CONFIG_SYS_CLK_FREQ/1000))
+#define CONFIG_SYS_HZ		(CONFIG_SYS_CLK_FREQ/(CONFIG_SYS_NIOS_TMRCNT + 1))
 
 /*------------------------------------------------------------------------
  * STATUS LED -- Provides a simple blinking led. For Nios2 each board
  * must implement its own led routines -- since leds are board-specific.
  *----------------------------------------------------------------------*/
-#define CFG_LEDPIO_ADDR		0x02120870	/* LED PIO base addr	*/
+#define CONFIG_SYS_LEDPIO_ADDR		0x02120870	/* LED PIO base addr	*/
 #define CONFIG_STATUS_LED			/* Enable status driver */
 
 #define STATUS_LED_BIT		1		/* Bit-0 on PIO		*/
 #define STATUS_LED_STATE	1		/* Blinking		*/
-#define STATUS_LED_PERIOD	(500/CFG_NIOS_TMRMS) /* Every 500 msec	*/
+#define STATUS_LED_PERIOD	(500/CONFIG_SYS_NIOS_TMRMS) /* Every 500 msec	*/
 
 /*------------------------------------------------------------------------
  * ETHERNET -- The header file for the SMC91111 driver hurts my eyes ...
@@ -187,17 +187,17 @@
 /*------------------------------------------------------------------------
  * MISC
  *----------------------------------------------------------------------*/
-#define CFG_LONGHELP				/* Provide extended help*/
-#define CFG_PROMPT		"==> "		/* Command prompt	*/
-#define CFG_CBSIZE		256		/* Console I/O buf size */
-#define CFG_MAXARGS		16		/* Max command args	*/
-#define CFG_BARGSIZE		CFG_CBSIZE	/* Boot arg buf size	*/
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print buf size */
-#define CFG_LOAD_ADDR		CFG_SDRAM_BASE	/* Default load address */
-#define CFG_MEMTEST_START	CFG_SDRAM_BASE	/* Start addr for test	*/
-#define CFG_MEMTEST_END		CFG_INIT_SP - 0x00020000
-
-#define CFG_HUSH_PARSER
-#define CFG_PROMPT_HUSH_PS2	"> "
+#define CONFIG_SYS_LONGHELP				/* Provide extended help*/
+#define CONFIG_SYS_PROMPT		"==> "		/* Command prompt	*/
+#define CONFIG_SYS_CBSIZE		256		/* Console I/O buf size */
+#define CONFIG_SYS_MAXARGS		16		/* Max command args	*/
+#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot arg buf size	*/
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print buf size */
+#define CONFIG_SYS_LOAD_ADDR		CONFIG_SYS_SDRAM_BASE	/* Default load address */
+#define CONFIG_SYS_MEMTEST_START	CONFIG_SYS_SDRAM_BASE	/* Start addr for test	*/
+#define CONFIG_SYS_MEMTEST_END		CONFIG_SYS_INIT_SP - 0x00020000
+
+#define CONFIG_SYS_HUSH_PARSER
+#define CONFIG_SYS_PROMPT_HUSH_PS2	"> "
 
 #endif	/* __CONFIG_H */
diff --git a/include/configs/EP88x.h b/include/configs/EP88x.h
index 5f1743b2f..e1c6096eb 100644
--- a/include/configs/EP88x.h
+++ b/include/configs/EP88x.h
@@ -41,15 +41,15 @@
 #define	CONFIG_ETHER_ON_FEC1			/* Enable Ethernet on FEC1	*/
 #define	CONFIG_ETHER_ON_FEC2			/* Enable Ethernet on FEC2	*/
 #if defined(CONFIG_ETHER_ON_FEC1) || defined(CONFIG_ETHER_ON_FEC2)
-#define CFG_DISCOVER_PHY
+#define CONFIG_SYS_DISCOVER_PHY
 #define CONFIG_MII_INIT		1
 #define FEC_ENET
 #endif /* CONFIG_FEC_ENET */
 
 #define CONFIG_8xx_OSCLK		10000000 /* 10 MHz oscillator on EXTCLK */
 #define CONFIG_8xx_CPUCLK_DEFAULT	100000000
-#define CFG_8xx_CPUCLK_MIN		40000000
-#define CFG_8xx_CPUCLK_MAX		133000000
+#define CONFIG_SYS_8xx_CPUCLK_MIN		40000000
+#define CONFIG_SYS_8xx_CPUCLK_MAX		133000000
 
 /*
  * BOOTP options
@@ -81,28 +81,28 @@
 /*-----------------------------------------------------------------------
  * Miscellaneous configurable options
  */
-#define CFG_PROMPT		"=> "		/* Monitor Command Prompt	*/
-#define CFG_HUSH_PARSER
-#define CFG_PROMPT_HUSH_PS2	"> "
-#define CFG_LONGHELP				/* #undef to save memory	*/
-#define CFG_CBSIZE		256		/* Console I/O Buffer Size	*/
-#define CFG_PBSIZE (CFG_CBSIZE + sizeof(CFG_PROMPT) + 16)  /* Print Buffer Size */
-#define CFG_MAXARGS		16		/* Max number of command args	*/
-#define CFG_BARGSIZE		CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+#define CONFIG_SYS_PROMPT		"=> "		/* Monitor Command Prompt	*/
+#define CONFIG_SYS_HUSH_PARSER
+#define CONFIG_SYS_PROMPT_HUSH_PS2	"> "
+#define CONFIG_SYS_LONGHELP				/* #undef to save memory	*/
+#define CONFIG_SYS_CBSIZE		256		/* Console I/O Buffer Size	*/
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)  /* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS		16		/* Max number of command args	*/
+#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
 
-#define CFG_LOAD_ADDR		0x400000	/* Default load address		*/
+#define CONFIG_SYS_LOAD_ADDR		0x400000	/* Default load address		*/
 
-#define CFG_HZ			1000		/* Decrementer freq: 1 ms ticks	*/
+#define CONFIG_SYS_HZ			1000		/* Decrementer freq: 1 ms ticks	*/
 
-#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
 
 /*-----------------------------------------------------------------------
- * RAM configuration (note that CFG_SDRAM_BASE must be zero)
+ * RAM configuration (note that CONFIG_SYS_SDRAM_BASE must be zero)
  */
-#define CFG_SDRAM_BASE		0x00000000
-#define CFG_SDRAM_MAX_SIZE	0x08000000	/* Up to 128 Mbyte		*/
+#define CONFIG_SYS_SDRAM_BASE		0x00000000
+#define CONFIG_SYS_SDRAM_MAX_SIZE	0x08000000	/* Up to 128 Mbyte		*/
 
-#define CFG_MAMR		0x00805000
+#define CONFIG_SYS_MAMR		0x00805000
 
 /*
  * 4096	Up to 4096 SDRAM rows
@@ -111,99 +111,99 @@
  * 4	Number of refresh cycles per period
  * 64	Refresh cycle in ms per number of rows
  */
-#define CFG_PTA_PER_CLK		((4096 * 32 * 1000) / (4 * 64))
+#define CONFIG_SYS_PTA_PER_CLK		((4096 * 32 * 1000) / (4 * 64))
 
-#define CFG_MEMTEST_START	0x00100000	/* memtest works on		*/
-#define CFG_MEMTEST_END		0x00500000	/* 1 ... 5 MB in SDRAM		*/
+#define CONFIG_SYS_MEMTEST_START	0x00100000	/* memtest works on		*/
+#define CONFIG_SYS_MEMTEST_END		0x00500000	/* 1 ... 5 MB in SDRAM		*/
 
-#define CFG_RESET_ADDRESS	0x09900000
+#define CONFIG_SYS_RESET_ADDRESS	0x09900000
 
 /*-----------------------------------------------------------------------
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
+#define CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
 
-#define CFG_MONITOR_BASE	TEXT_BASE
-#define CFG_MONITOR_LEN		(256 << 10)	/* Reserve 256 KB for Monitor   */
+#define CONFIG_SYS_MONITOR_BASE	TEXT_BASE
+#define CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 256 KB for Monitor   */
 #ifdef CONFIG_BZIP2
-#define CFG_MALLOC_LEN		(4096 << 10)	/* Reserve ~4 MB for malloc()   */
+#define CONFIG_SYS_MALLOC_LEN		(4096 << 10)	/* Reserve ~4 MB for malloc()   */
 #else
-#define CFG_MALLOC_LEN		(128 << 10)	/* Reserve 128 KB for malloc()  */
+#define CONFIG_SYS_MALLOC_LEN		(128 << 10)	/* Reserve 128 KB for malloc()  */
 #endif /* CONFIG_BZIP2 */
 
 /*-----------------------------------------------------------------------
  * Flash organisation
  */
-#define CFG_FLASH_BASE		0xFC000000
-#define CFG_FLASH_CFI				/* The flash is CFI compatible  */
+#define CONFIG_SYS_FLASH_BASE		0xFC000000
+#define CONFIG_SYS_FLASH_CFI				/* The flash is CFI compatible  */
 #define CONFIG_FLASH_CFI_DRIVER			/* Use common CFI driver        */
-#define CFG_MAX_FLASH_BANKS	1		/* Max number of flash banks	*/
-#define CFG_MAX_FLASH_SECT	512		/* Max num of sects on one chip */
+#define CONFIG_SYS_MAX_FLASH_BANKS	1		/* Max number of flash banks	*/
+#define CONFIG_SYS_MAX_FLASH_SECT	512		/* Max num of sects on one chip */
 
 /* Environment is in flash */
-#define CFG_ENV_IS_IN_FLASH
-#define CFG_ENV_SECT_SIZE	0x20000		/* We use one complete sector	*/
-#define CFG_ENV_ADDR		(CFG_MONITOR_BASE + CFG_MONITOR_LEN)
+#define CONFIG_ENV_IS_IN_FLASH
+#define CONFIG_ENV_SECT_SIZE	0x20000		/* We use one complete sector	*/
+#define CONFIG_ENV_ADDR		(CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)
 
-#define CFG_OR0_PRELIM		0xFC000160
-#define CFG_BR0_PRELIM		(CFG_FLASH_BASE | BR_PS_32 | BR_MS_GPCM | BR_V)
+#define CONFIG_SYS_OR0_PRELIM		0xFC000160
+#define CONFIG_SYS_BR0_PRELIM		(CONFIG_SYS_FLASH_BASE | BR_PS_32 | BR_MS_GPCM | BR_V)
 
-#define	CFG_DIRECT_FLASH_TFTP
+#define	CONFIG_SYS_DIRECT_FLASH_TFTP
 
 /*-----------------------------------------------------------------------
  * BCSR
  */
-#define CFG_OR3_PRELIM		0xFF0005B0
-#define CFG_BR3_PRELIM		(0xFA000000 |BR_PS_16 | BR_MS_GPCM | BR_V)
+#define CONFIG_SYS_OR3_PRELIM		0xFF0005B0
+#define CONFIG_SYS_BR3_PRELIM		(0xFA000000 |BR_PS_16 | BR_MS_GPCM | BR_V)
 
-#define CFG_BCSR		0xFA400000
+#define CONFIG_SYS_BCSR		0xFA400000
 
 /*-----------------------------------------------------------------------
  * Internal Memory Map Register
  */
-#define CFG_IMMR		0xF0000000
+#define CONFIG_SYS_IMMR		0xF0000000
 
 /*-----------------------------------------------------------------------
  * Definitions for initial stack pointer and data area (in DPRAM)
  */
-#define CFG_INIT_RAM_ADDR	CFG_IMMR
-#define CFG_INIT_RAM_END	0x2F00		/* End of used area in DPRAM	*/
-#define CFG_GBL_DATA_SIZE	128  /* Size in bytes reserved for initial data */
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_IMMR
+#define CONFIG_SYS_INIT_RAM_END	0x2F00		/* End of used area in DPRAM	*/
+#define CONFIG_SYS_GBL_DATA_SIZE	128  /* Size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
 /*-----------------------------------------------------------------------
  * Configuration registers
  */
 #ifdef CONFIG_WATCHDOG
-#define CFG_SYPCR		(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME  | \
+#define CONFIG_SYS_SYPCR		(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME  | \
 				 SYPCR_SWF  | SYPCR_SWE | SYPCR_SWRI | \
 				 SYPCR_SWP)
 #else
-#define CFG_SYPCR		(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME  | \
+#define CONFIG_SYS_SYPCR		(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME  | \
 				 SYPCR_SWF  | SYPCR_SWP)
 #endif /* CONFIG_WATCHDOG */
 
-#define CFG_SIUMCR		(SIUMCR_MLRC01 | SIUMCR_DBGC11)
+#define CONFIG_SYS_SIUMCR		(SIUMCR_MLRC01 | SIUMCR_DBGC11)
 
 /* TBSCR - Time Base Status and Control Register */
-#define CFG_TBSCR		(TBSCR_TBF | TBSCR_TBE)
+#define CONFIG_SYS_TBSCR		(TBSCR_TBF | TBSCR_TBE)
 
 /* PISCR - Periodic Interrupt Status and Control */
-#define CFG_PISCR		PISCR_PS
+#define CONFIG_SYS_PISCR		PISCR_PS
 
 /* SCCR - System Clock and reset Control Register */
 #define SCCR_MASK		SCCR_EBDF11
-#define CFG_SCCR		SCCR_RTSEL
+#define CONFIG_SYS_SCCR		SCCR_RTSEL
 
-#define CFG_DER			0
+#define CONFIG_SYS_DER			0
 
 /*-----------------------------------------------------------------------
  * Cache Configuration
  */
-#define CFG_CACHELINE_SIZE	16	/* For all MPC8xx chips			*/
+#define CONFIG_SYS_CACHELINE_SIZE	16	/* For all MPC8xx chips			*/
 
 /*-----------------------------------------------------------------------
  * Internal Definitions
diff --git a/include/configs/ERIC.h b/include/configs/ERIC.h
index bfdcf6a55..1b766a7dc 100644
--- a/include/configs/ERIC.h
+++ b/include/configs/ERIC.h
@@ -42,37 +42,37 @@
 #define CONFIG_SYS_CLK_FREQ	33333333 /* external frequency to pll	*/
 
 #if 1
-#define CFG_ENV_IS_IN_FLASH	1	/* use FLASH for environment vars	*/
+#define CONFIG_ENV_IS_IN_FLASH	1	/* use FLASH for environment vars	*/
 #endif
 #if 0
-#define CFG_ENV_IS_IN_NVRAM	1	/* use NVRAM for environment vars	*/
+#define CONFIG_ENV_IS_IN_NVRAM	1	/* use NVRAM for environment vars	*/
 #endif
 #if 0
-#define CFG_ENV_IS_IN_EEPROM	1	/* use I2C RTC X1240 for environment vars */
-#define CFG_ENV_OFFSET		0x000	/* environment starts at the beginning of the EEPROM */
-#define CFG_ENV_SIZE		0x800	/* 2048 bytes may be used for env vars */
+#define CONFIG_ENV_IS_IN_EEPROM	1	/* use I2C RTC X1240 for environment vars */
+#define CONFIG_ENV_OFFSET		0x000	/* environment starts at the beginning of the EEPROM */
+#define CONFIG_ENV_SIZE		0x800	/* 2048 bytes may be used for env vars */
 #endif					/* total size of a X1240 is 2048 bytes */
 
 #define CONFIG_HARD_I2C		1	/* I2C with hardware support */
-#define CFG_I2C_SPEED		400000	/* I2C speed and slave address */
-#define CFG_I2C_SLAVE		0x7F
+#define CONFIG_SYS_I2C_SPEED		400000	/* I2C speed and slave address */
+#define CONFIG_SYS_I2C_SLAVE		0x7F
 
-#define CFG_I2C_EEPROM_ADDR	0x57	/* X1240 has two I2C slave addresses, one for EEPROM */
-#define CFG_I2C_EEPROM_ADDR_LEN	2	/* address length for the eeprom */
+#define CONFIG_SYS_I2C_EEPROM_ADDR	0x57	/* X1240 has two I2C slave addresses, one for EEPROM */
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN	2	/* address length for the eeprom */
 #define CONFIG_I2C_RTC		1	/* we have a Xicor X1240 RTC */
-#define CFG_I2C_RTC_ADDR	0x6F	/*                                and one for RTC */
+#define CONFIG_SYS_I2C_RTC_ADDR	0x6F	/*                                and one for RTC */
 
-#ifdef CFG_ENV_IS_IN_FLASH
-#undef CFG_ENV_IS_IN_NVRAM
-#undef CFG_ENV_IS_IN_EEPROM
+#ifdef CONFIG_ENV_IS_IN_FLASH
+#undef CONFIG_ENV_IS_IN_NVRAM
+#undef CONFIG_ENV_IS_IN_EEPROM
 #else
-#ifdef CFG_ENV_IS_IN_NVRAM
-#undef CFG_ENV_IS_IN_FLASH
-#undef CFG_ENV_IS_IN_EEPROM
+#ifdef CONFIG_ENV_IS_IN_NVRAM
+#undef CONFIG_ENV_IS_IN_FLASH
+#undef CONFIG_ENV_IS_IN_EEPROM
 #else
-#ifdef CFG_ENV_IS_IN_EEPROM
-#undef CFG_ENV_IS_IN_NVRAM
-#undef CFG_ENV_IS_IN_FLASH
+#ifdef CONFIG_ENV_IS_IN_EEPROM
+#undef CONFIG_ENV_IS_IN_NVRAM
+#undef CONFIG_ENV_IS_IN_FLASH
 #endif
 #endif
 #endif
@@ -91,8 +91,9 @@
 				"ip=192.168.1.22:192.168.1.2"
 
 #define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
-#define CFG_LOADS_BAUD_CHANGE	1	/* allow baudrate change	*/
+#define CONFIG_SYS_LOADS_BAUD_CHANGE	1	/* allow baudrate change	*/
 
+#define CONFIG_PPC4xx_EMAC
 #define CONFIG_MII		1	/* MII PHY management		*/
 #define CONFIG_PHY_ADDR		1	/* PHY address			*/
 
@@ -122,31 +123,31 @@
 /*
  * Miscellaneous configurable options
  */
-#undef	CFG_LONGHELP			/* undef to save memory		*/
-#define CFG_PROMPT	"=> "		/* Monitor Command Prompt	*/
+#undef	CONFIG_SYS_LONGHELP			/* undef to save memory		*/
+#define CONFIG_SYS_PROMPT	"=> "		/* Monitor Command Prompt	*/
 #if defined(CONFIG_CMD_KGDB)
-#define CFG_CBSIZE	1024		/* Console I/O Buffer Size	*/
+#define CONFIG_SYS_CBSIZE	1024		/* Console I/O Buffer Size	*/
 #else
-#define CFG_CBSIZE	256		/* Console I/O Buffer Size	*/
+#define CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size	*/
 #endif
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define CFG_MAXARGS	16		/* max number of command args	*/
-#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS	16		/* max number of command args	*/
+#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
 
-#define CFG_MEMTEST_START	0x0400000	/* memtest works on	*/
-#define CFG_MEMTEST_END		0x0C00000	/* 4 ... 12 MB in DRAM	*/
+#define CONFIG_SYS_MEMTEST_START	0x0400000	/* memtest works on	*/
+#define CONFIG_SYS_MEMTEST_END		0x0C00000	/* 4 ... 12 MB in DRAM	*/
 
-#define	 CFG_EXT_SERIAL_CLOCK	 14318180
+#define	 CONFIG_SYS_EXT_SERIAL_CLOCK	 14318180
 
 /* The following table includes the supported baudrates */
-#define CFG_BAUDRATE_TABLE	\
+#define CONFIG_SYS_BAUDRATE_TABLE	\
 	{ 300, 600, 1200, 2400, 4800, 9600, 19200, 38400,     \
 	 57600, 115200, 230400, 460800, 921600 }
 
-#define CFG_LOAD_ADDR		0x100000	/* default load address */
-#define CFG_EXTBDINFO		1	/* To use extended board_into (bd_t) */
+#define CONFIG_SYS_LOAD_ADDR		0x100000	/* default load address */
+#define CONFIG_SYS_EXTBDINFO		1	/* To use extended board_into (bd_t) */
 
-#define CFG_HZ		1000		/* decrementer freq: 1 ms ticks */
+#define CONFIG_SYS_HZ		1000		/* decrementer freq: 1 ms ticks */
 
 /*-----------------------------------------------------------------------
  * PCI stuff
@@ -161,14 +162,14 @@
 #undef  CONFIG_PCI_PNP			/* no pci plug-and-play         */
 					/* resource configuration       */
 
-#define CFG_PCI_SUBSYS_VENDORID 0x1743	/* PCI Vendor ID: Peppercon AG	*/
-#define CFG_PCI_SUBSYS_DEVICEID 0x0405	/* PCI Device ID: 405GP		*/
-#define CFG_PCI_PTM1LA	0xFFFC0000	/* point to flash		*/
-#define CFG_PCI_PTM1MS	0xFFFFF001	/* 4kB, enable hard-wired to 1	*/
-#define CFG_PCI_PTM1PCI 0x00000000      /* Host: use this pci address   */
-#define CFG_PCI_PTM2LA	0x00000000	/* disabled			*/
-#define CFG_PCI_PTM2MS	0x00000000	/* disabled			*/
-#define CFG_PCI_PTM2PCI 0x04000000      /* Host: use this pci address   */
+#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x1743	/* PCI Vendor ID: Peppercon AG	*/
+#define CONFIG_SYS_PCI_SUBSYS_DEVICEID 0x0405	/* PCI Device ID: 405GP		*/
+#define CONFIG_SYS_PCI_PTM1LA	0xFFFC0000	/* point to flash		*/
+#define CONFIG_SYS_PCI_PTM1MS	0xFFFFF001	/* 4kB, enable hard-wired to 1	*/
+#define CONFIG_SYS_PCI_PTM1PCI 0x00000000      /* Host: use this pci address   */
+#define CONFIG_SYS_PCI_PTM2LA	0x00000000	/* disabled			*/
+#define CONFIG_SYS_PCI_PTM2MS	0x00000000	/* disabled			*/
+#define CONFIG_SYS_PCI_PTM2PCI 0x04000000      /* Host: use this pci address   */
 
 /*-----------------------------------------------------------------------
  * External peripheral base address
@@ -224,21 +225,21 @@
 #define CS7_AP	0x02815480 /* WT=1, OEN=0x1,WBN=0x1,WBF=0x1,TH=0x2,RE=0, */
 #define CS7_CR	0xF0618000 /* BAS=0xF01,BS=(1MB),BU=0x3(R/W), BW=(8 bits) */
 
-#define CFG_NVRAM_REG_BASE_ADDR	 0xF0000000
-#define CFG_RTC_REG_BASE_ADDR	 (0xF0000000 + 0x7F8)
-#define CFG_ADC_REG_BASE_ADDR	 0xF0100000
-#define CFG_PHYRES_REG_BASE_ADDR 0xF0200000
-#define CFG_PRSNT1_REG_BASE_ADDR 0xF0300000
-#define CFG_PRSNT2_REG_BASE_ADDR 0xF0400000
-#define CFG_LED0_REG_BASE_ADDR	 0xF0500000
-#define CFG_LED1_REG_BASE_ADDR	 0xF0600000
+#define CONFIG_SYS_NVRAM_REG_BASE_ADDR	 0xF0000000
+#define CONFIG_SYS_RTC_REG_BASE_ADDR	 (0xF0000000 + 0x7F8)
+#define CONFIG_SYS_ADC_REG_BASE_ADDR	 0xF0100000
+#define CONFIG_SYS_PHYRES_REG_BASE_ADDR 0xF0200000
+#define CONFIG_SYS_PRSNT1_REG_BASE_ADDR 0xF0300000
+#define CONFIG_SYS_PRSNT2_REG_BASE_ADDR 0xF0400000
+#define CONFIG_SYS_LED0_REG_BASE_ADDR	 0xF0500000
+#define CONFIG_SYS_LED1_REG_BASE_ADDR	 0xF0600000
 
 
 /*  SDRAM CONFIG */
-#define CFG_SDRAM_MANUALLY    1
-#define CFG_SDRAM_SINGLE_BANK 1
+#define CONFIG_SYS_SDRAM_MANUALLY    1
+#define CONFIG_SYS_SDRAM_SINGLE_BANK 1
 
-#ifdef CFG_SDRAM_MANUALLY
+#ifdef CONFIG_SYS_SDRAM_MANUALLY
 /*-----------------------------------------------------------------------
  * Set MB0CF for bank 0. (0-32MB) Address Mode 4 since 12x8(2)
  *----------------------------------------------------------------------*/
@@ -246,7 +247,7 @@
 /*-----------------------------------------------------------------------
  * Set MB1CF for bank 1. (32MB-64MB) Address Mode 4 since 12x8(2)
  *----------------------------------------------------------------------*/
-#ifdef CFG_SDRAM_SINGLE_BANK
+#ifdef CONFIG_SYS_SDRAM_SINGLE_BANK
 #define MB1CF	0x0 /*  0MB @ 32MB */
 #else
 #define MB1CF	0x02062001 /*  32MB @ 32MB */
@@ -265,49 +266,49 @@
 #define SDTR_66     0x00854006	/* orig U-Boot-wallnut says 0x00854006 */
 #define RTR_66      0x03f8
 
-#endif   /* CFG_SDRAM_MANUALLY */
+#endif   /* CONFIG_SYS_SDRAM_MANUALLY */
 
 
 /*-----------------------------------------------------------------------
  * Start addresses for the final memory configuration
  * (Set up by the startup code)
- * Please note that CFG_SDRAM_BASE _must_ start at 0
+ * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
  */
-#define CFG_SDRAM_BASE		0x00000000
-#define CFG_SDRAM_SIZE		32
-#define CFG_FLASH_BASE		0xFF800000      /* 8 MByte Flash */
-#define CFG_MONITOR_BASE	0xFFFE0000      /* last 128kByte within Flash */
-/*#define CFG_MONITOR_LEN		(192 * 1024)*/	/* Reserve 196 kB for Monitor	*/
-#define CFG_MONITOR_LEN		(128 * 1024)	/* Reserve 128 kB for Monitor	*/
-#define CFG_MALLOC_LEN		(128 * 1024)	/* Reserve 128 kB for malloc()	*/
+#define CONFIG_SYS_SDRAM_BASE		0x00000000
+#define CONFIG_SYS_SDRAM_SIZE		32
+#define CONFIG_SYS_FLASH_BASE		0xFF800000      /* 8 MByte Flash */
+#define CONFIG_SYS_MONITOR_BASE	0xFFFE0000      /* last 128kByte within Flash */
+/*#define CONFIG_SYS_MONITOR_LEN		(192 * 1024)*/	/* Reserve 196 kB for Monitor	*/
+#define CONFIG_SYS_MONITOR_LEN		(128 * 1024)	/* Reserve 128 kB for Monitor	*/
+#define CONFIG_SYS_MALLOC_LEN		(128 * 1024)	/* Reserve 128 kB for malloc()	*/
 
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
+#define CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
 /*-----------------------------------------------------------------------
  * FLASH organization
  */
-#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
-#define CFG_MAX_FLASH_SECT	64	/* max number of sectors on one chip	*/
-#define CFG_FLASH_16BIT		1	/* Rom 16 bit data bus			*/
+#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
+#define CONFIG_SYS_MAX_FLASH_SECT	64	/* max number of sectors on one chip	*/
+#define CONFIG_SYS_FLASH_16BIT		1	/* Rom 16 bit data bus			*/
 
-#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
-#define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
+#define CONFIG_SYS_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
+#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
 
 /* BEG ENVIRONNEMENT FLASH */
-#ifdef CFG_ENV_IS_IN_FLASH
-#define CFG_ENV_SECT_SIZE       (128*1024)
+#ifdef CONFIG_ENV_IS_IN_FLASH
+#define CONFIG_ENV_SECT_SIZE       (128*1024)
 
 #if 0  /* force ENV to be NOT embedded */
-#define CFG_ENV_ADDR            0xfffa0000
+#define CONFIG_ENV_ADDR            0xfffa0000
 #else  /* force ENV to be embedded */
-#define	CFG_ENV_SIZE		(2 * 1024) /* Total Size of Environment Sector 2k */
-#define CFG_ENV_ADDR            (CFG_MONITOR_BASE + CFG_MONITOR_LEN - CFG_ENV_SIZE - 0x10) /* let space for reset vector */
-/* #define CFG_ENV_ADDR            (CFG_MONITOR_BASE)*/
-#define CFG_ENV_OFFSET          (CFG_ENV_ADDR - CFG_FLASH_BASE)
+#define	CONFIG_ENV_SIZE		(2 * 1024) /* Total Size of Environment Sector 2k */
+#define CONFIG_ENV_ADDR            (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN - CONFIG_ENV_SIZE - 0x10) /* let space for reset vector */
+/* #define CONFIG_ENV_ADDR            (CONFIG_SYS_MONITOR_BASE)*/
+#define CONFIG_ENV_OFFSET          (CONFIG_ENV_ADDR - CONFIG_SYS_FLASH_BASE)
 #endif
 
 #endif
@@ -315,13 +316,13 @@
 /*-----------------------------------------------------------------------
  * NVRAM organization
  */
-#define CFG_NVRAM_BASE_ADDR	CFG_NVRAM_REG_BASE_ADDR	/* NVRAM base address	*/
-#define CFG_NVRAM_SIZE		0x7F8		/* NVRAM size 2kByte - 8 Byte for RTC */
+#define CONFIG_SYS_NVRAM_BASE_ADDR	CONFIG_SYS_NVRAM_REG_BASE_ADDR	/* NVRAM base address	*/
+#define CONFIG_SYS_NVRAM_SIZE		0x7F8		/* NVRAM size 2kByte - 8 Byte for RTC */
 
-#ifdef CFG_ENV_IS_IN_NVRAM
-#define CFG_ENV_SIZE		0x7F8		/* Size of Environment vars	*/
-#define CFG_ENV_ADDR		\
-	(CFG_NVRAM_BASE_ADDR+CFG_NVRAM_SIZE-CFG_ENV_SIZE)	/* Env	*/
+#ifdef CONFIG_ENV_IS_IN_NVRAM
+#define CONFIG_ENV_SIZE		0x7F8		/* Size of Environment vars	*/
+#define CONFIG_ENV_ADDR		\
+	(CONFIG_SYS_NVRAM_BASE_ADDR+CONFIG_SYS_NVRAM_SIZE-CONFIG_ENV_SIZE)	/* Env	*/
 #endif
 
 /*
@@ -340,11 +341,11 @@
 /*-----------------------------------------------------------------------
  * Definitions for initial stack pointer and data area (in DPRAM)
  */
-#define CFG_INIT_RAM_ADDR	0x00df0000  /* inside of SDRAM		       */
-#define CFG_INIT_RAM_END	0x0f00	/* End of used area in RAM	       */
-#define CFG_GBL_DATA_SIZE	64  /* size in bytes reserved for initial data */
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_INIT_RAM_ADDR	0x00df0000  /* inside of SDRAM		       */
+#define CONFIG_SYS_INIT_RAM_END	0x0f00	/* End of used area in RAM	       */
+#define CONFIG_SYS_GBL_DATA_SIZE	64  /* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
 /*-----------------------------------------------------------------------
  * Definitions for Serial Presence Detect EEPROM address
diff --git a/include/configs/ESTEEM192E.h b/include/configs/ESTEEM192E.h
index 66e1203b7..11a862e98 100644
--- a/include/configs/ESTEEM192E.h
+++ b/include/configs/ESTEEM192E.h
@@ -44,7 +44,7 @@
 
 #define MPC8XX_FACT	10		/* Multiply by 10		*/
 #define MPC8XX_XIN	4915200	/* 4.915200 MHz in	- ??? - XXX	*/
-#define CFG_PLPRCR_MF	((MPC8XX_FACT-1) << 20)
+#define CONFIG_SYS_PLPRCR_MF	((MPC8XX_FACT-1) << 20)
 #define MPC8XX_HZ ((MPC8XX_XIN) * (MPC8XX_FACT)) /* 49,152,000 Hz	*/
 
 #define CONFIG_8xx_GCLK_FREQ	MPC8XX_HZ	/* Force it - dont measure it */
@@ -66,7 +66,7 @@
  */
 
 #define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
-#undef	CFG_LOADS_BAUD_CHANGE		/* don't allow baudrate change	*/
+#undef	CONFIG_SYS_LOADS_BAUD_CHANGE		/* don't allow baudrate change	*/
 
 #undef	CONFIG_WATCHDOG			/* watchdog disabled		*/
 
@@ -86,22 +86,22 @@
 #include <config_cmd_default.h>
 
 
-#define	CFG_LONGHELP			/* undef to save memory		*/
-#define	CFG_PROMPT	"BOOT: "	/* Monitor Command Prompt	*/
-#define	CFG_CBSIZE	256			/* Console I/O Buffer Size	*/
-#define	CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define	CFG_MAXARGS	8			/* max number of command args	*/
-#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+#define	CONFIG_SYS_LONGHELP			/* undef to save memory		*/
+#define	CONFIG_SYS_PROMPT	"BOOT: "	/* Monitor Command Prompt	*/
+#define	CONFIG_SYS_CBSIZE	256			/* Console I/O Buffer Size	*/
+#define	CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define	CONFIG_SYS_MAXARGS	8			/* max number of command args	*/
+#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
 
-#define CFG_MEMTEST_START	0x0400000	/* memtest works on	*/
-#define CFG_MEMTEST_END		0x0C00000	/* 4 ... 12 MB in DRAM	*/
+#define CONFIG_SYS_MEMTEST_START	0x0400000	/* memtest works on	*/
+#define CONFIG_SYS_MEMTEST_END		0x0C00000	/* 4 ... 12 MB in DRAM	*/
 
-#define	CFG_LOAD_ADDR		0x100000	/* default load address	*/
+#define	CONFIG_SYS_LOAD_ADDR		0x100000	/* default load address	*/
 
-#define	CFG_HZ			1000		/* decrementer freq: 1 ms ticks	*/
+#define	CONFIG_SYS_HZ			1000		/* decrementer freq: 1 ms ticks	*/
 
 
-#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
 
 
 /*
@@ -112,55 +112,55 @@
 /*-----------------------------------------------------------------------
  * Internal Memory Mapped Register
  */
-#define CFG_IMMR		0xFF000000
+#define CONFIG_SYS_IMMR		0xFF000000
 
   /*-----------------------------------------------------------------------
  * Definitions for initial stack pointer and data area (in DPRAM)
  */
-#define CFG_INIT_RAM_ADDR	CFG_IMMR
-#define	CFG_INIT_RAM_END	0x2F00	/* End of used area in DPRAM	*/
-#define	CFG_GBL_DATA_SIZE	64  /* size in bytes reserved for initial data */
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define	CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_IMMR
+#define	CONFIG_SYS_INIT_RAM_END	0x2F00	/* End of used area in DPRAM	*/
+#define	CONFIG_SYS_GBL_DATA_SIZE	64  /* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define	CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
 
 /*-----------------------------------------------------------------------
  * Start addresses for the final memory configuration
  * (Set up by the startup code)
- * Please note that CFG_SDRAM_BASE _must_ start at 0
+ * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
  */
-#define	CFG_SDRAM_BASE		0x00000000
-#define CFG_FLASH_BASE		0x40000000
+#define	CONFIG_SYS_SDRAM_BASE		0x00000000
+#define CONFIG_SYS_FLASH_BASE		0x40000000
 #ifdef	DEBUG
-#define	CFG_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor	*/
+#define	CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor	*/
 #else
-#define	CFG_MONITOR_LEN		(128 << 10)	/* Reserve 128 kB for Monitor	*/
+#define	CONFIG_SYS_MONITOR_LEN		(128 << 10)	/* Reserve 128 kB for Monitor	*/
 #endif
-#define CFG_MONITOR_BASE	CFG_FLASH_BASE
-#define	CFG_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/
+#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_FLASH_BASE
+#define	CONFIG_SYS_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/
 
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define	CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux	*/
+#define	CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux	*/
 /*-----------------------------------------------------------------------
  * FLASH organization
  */
-#define CFG_MAX_FLASH_BANKS	2	/* max number of memory banks		*/
-#define CFG_MAX_FLASH_SECT	71	/* max number of sectors on one chip	*/
+#define CONFIG_SYS_MAX_FLASH_BANKS	2	/* max number of memory banks		*/
+#define CONFIG_SYS_MAX_FLASH_SECT	71	/* max number of sectors on one chip	*/
 
-#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
-#define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
+#define CONFIG_SYS_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
+#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
 
-#define	CFG_ENV_IS_IN_FLASH	1
-#define	CFG_ENV_OFFSET		0x8000	/*   Offset   of Environment Sector	*/
-#define	CFG_ENV_SIZE		0x2000	/* Total Size of Environment Sector	*/
+#define	CONFIG_ENV_IS_IN_FLASH	1
+#define	CONFIG_ENV_OFFSET		0x8000	/*   Offset   of Environment Sector	*/
+#define	CONFIG_ENV_SIZE		0x2000	/* Total Size of Environment Sector	*/
 /*-----------------------------------------------------------------------
  * Cache Configuration
  */
-#define CFG_CACHELINE_SIZE	16	/* For all MPC8xx CPUs			*/
+#define CONFIG_SYS_CACHELINE_SIZE	16	/* For all MPC8xx CPUs			*/
 
 /*-----------------------------------------------------------------------
  * SYPCR - System Protection Control				11-9
@@ -168,21 +168,21 @@
  *-----------------------------------------------------------------------
  * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze
  */
-#define CFG_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
+#define CONFIG_SYS_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
 
 /*-----------------------------------------------------------------------
  * SUMCR - SIU Module Configuration				11-6
  *-----------------------------------------------------------------------
  * PCMCIA config., multi-function pin tri-state
  */
-#define CFG_SIUMCR	(SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_MLRC01) /* DBGC00 */
+#define CONFIG_SYS_SIUMCR	(SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_MLRC01) /* DBGC00 */
 
 /*-----------------------------------------------------------------------
  * TBSCR - Time Base Status and Control				11-26
  *-----------------------------------------------------------------------
  * Clear Reference Interrupt Status, Timebase freezing enabled
  */
-#define CFG_TBSCR	(TBSCR_REFA | TBSCR_REFB | TBSCR_TBF | TBSCR_TBE)
+#define CONFIG_SYS_TBSCR	(TBSCR_REFA | TBSCR_REFB | TBSCR_TBF | TBSCR_TBE)
 
 /* (TBSCR_REFA | TBSCR_REFB | TBSCR_TBF) */
 
@@ -192,7 +192,7 @@
  *-----------------------------------------------------------------------
  * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
  */
-#define CFG_PISCR	(PISCR_PS | PISCR_PITF)
+#define CONFIG_SYS_PISCR	(PISCR_PS | PISCR_PITF)
 
 /*-----------------------------------------------------------------------
  * PLPRCR - PLL, Low-Power, and Reset Control Register		15-30
@@ -200,7 +200,7 @@
  * Reset PLL lock status sticky bit, timer expired status bit and timer
  * interrupt status bit - leave PLL multiplication factor unchanged !
  */
-#define CFG_PLPRCR	(CFG_PLPRCR_MF | PLPRCR_SPLSS | PLPRCR_TEXPS | PLPRCR_TMIST)
+#define CONFIG_SYS_PLPRCR	(CONFIG_SYS_PLPRCR_MF | PLPRCR_SPLSS | PLPRCR_TEXPS | PLPRCR_TMIST)
 
 /*-----------------------------------------------------------------------
  * SCCR - System Clock and reset Control Register		15-27
@@ -209,7 +209,7 @@
  * power management and some other internal clocks
  */
 #define SCCR_MASK	SCCR_EBDF11
-#define CFG_SCCR	(SCCR_TBS     | \
+#define CONFIG_SYS_SCCR	(SCCR_TBS     | \
 			 SCCR_COM00   | SCCR_DFSYNC00 | SCCR_DFBRG00  | \
 			 SCCR_DFNL000 | SCCR_DFNH000  | SCCR_DFLCD000 | \
 			 SCCR_DFALCD00)
@@ -219,25 +219,25 @@
  *-----------------------------------------------------------------------
  *
  */
-#define CFG_PCMCIA_MEM_ADDR	(0xE0000000)
-#define CFG_PCMCIA_MEM_SIZE	( 64 << 20 )
-#define CFG_PCMCIA_DMA_ADDR	(0xE4000000)
-#define CFG_PCMCIA_DMA_SIZE	( 64 << 20 )
-#define CFG_PCMCIA_ATTRB_ADDR	(0xE8000000)
-#define CFG_PCMCIA_ATTRB_SIZE	( 64 << 20 )
-#define CFG_PCMCIA_IO_ADDR	(0xEC000000)
-#define CFG_PCMCIA_IO_SIZE	( 64 << 20 )
+#define CONFIG_SYS_PCMCIA_MEM_ADDR	(0xE0000000)
+#define CONFIG_SYS_PCMCIA_MEM_SIZE	( 64 << 20 )
+#define CONFIG_SYS_PCMCIA_DMA_ADDR	(0xE4000000)
+#define CONFIG_SYS_PCMCIA_DMA_SIZE	( 64 << 20 )
+#define CONFIG_SYS_PCMCIA_ATTRB_ADDR	(0xE8000000)
+#define CONFIG_SYS_PCMCIA_ATTRB_SIZE	( 64 << 20 )
+#define CONFIG_SYS_PCMCIA_IO_ADDR	(0xEC000000)
+#define CONFIG_SYS_PCMCIA_IO_SIZE	( 64 << 20 )
 
-#define CFG_PCMCIA_INTERRUPT	SIU_LEVEL6
+#define CONFIG_SYS_PCMCIA_INTERRUPT	SIU_LEVEL6
 
 /*-----------------------------------------------------------------------
  *
  *-----------------------------------------------------------------------
  *
  */
-/*#define	CFG_DER	0x2002000F*/
-#define CFG_DER	0
-/*#define CFG_DER	0x02002000 */
+/*#define	CONFIG_SYS_DER	0x2002000F*/
+#define CONFIG_SYS_DER	0
+/*#define CONFIG_SYS_DER	0x02002000 */
 
 
 /*
@@ -253,21 +253,21 @@
  * restrict access enough to keep SRAM working (if any)
  * but not too much to meddle with FLASH accesses
  */
-#define CFG_REMAP_OR_AM		0x80000000	/* OR addr mask */
-#define CFG_PRELIM_OR_AM	0xE0000000	/* OR addr mask */
+#define CONFIG_SYS_REMAP_OR_AM		0x80000000	/* OR addr mask */
+#define CONFIG_SYS_PRELIM_OR_AM	0xE0000000	/* OR addr mask */
 
 /* FLASH timing: ACS = 11, TRLX = 0, CSNT = 1, SCY = 5, EHTR = 1	*/
-#define CFG_OR_TIMING_FLASH	0x00000160
+#define CONFIG_SYS_OR_TIMING_FLASH	0x00000160
 				/*(OR_CSNT_SAM  | OR_ACS_DIV2 | OR_BI | \
 				 OR_SCY_5_CLK | OR_EHTR) */
 
-#define CFG_OR0_REMAP	0x80000160     /*(CFG_REMAP_OR_AM  | CFG_OR_TIMING_FLASH)*/
-#define CFG_OR0_PRELIM	(CFG_PRELIM_OR_AM | CFG_OR_TIMING_FLASH)
-#define CFG_BR0_PRELIM	( FLASH_BASE0_PRELIM | 0x00000801 )
+#define CONFIG_SYS_OR0_REMAP	0x80000160     /*(CONFIG_SYS_REMAP_OR_AM  | CONFIG_SYS_OR_TIMING_FLASH)*/
+#define CONFIG_SYS_OR0_PRELIM	(CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_FLASH)
+#define CONFIG_SYS_BR0_PRELIM	( FLASH_BASE0_PRELIM | 0x00000801 )
 
-#define CFG_OR1_REMAP	CFG_OR0_REMAP
-#define CFG_OR1_PRELIM	CFG_OR0_PRELIM
-#define CFG_BR1_PRELIM	( FLASH_BASE1_PRELIM | 0x00000801 )
+#define CONFIG_SYS_OR1_REMAP	CONFIG_SYS_OR0_REMAP
+#define CONFIG_SYS_OR1_PRELIM	CONFIG_SYS_OR0_PRELIM
+#define CONFIG_SYS_BR1_PRELIM	( FLASH_BASE1_PRELIM | 0x00000801 )
 
 /*
  * BR2/3 and OR2/3 (SDRAM)
@@ -278,13 +278,13 @@
 #define	SDRAM_MAX_SIZE		0x02000000	/* max 32 MB per bank	*/
 
 /* SDRAM timing: Multiplexed addresses, GPL5 output to GPL5_A (don't care)	*/
-#define CFG_OR_TIMING_SDRAM	0x00000A00
+#define CONFIG_SYS_OR_TIMING_SDRAM	0x00000A00
 
-#define CFG_OR2_PRELIM	0xFC000E00
-#define CFG_BR2_PRELIM	(SDRAM_BASE2_PRELIM | 0x00000081)
+#define CONFIG_SYS_OR2_PRELIM	0xFC000E00
+#define CONFIG_SYS_BR2_PRELIM	(SDRAM_BASE2_PRELIM | 0x00000081)
 
-#define	CFG_OR3_PRELIM	CFG_OR2_PRELIM
-#define CFG_BR3_PRELIM	(SDRAM_BASE3_PRELIM | 0x00000081)
+#define	CONFIG_SYS_OR3_PRELIM	CONFIG_SYS_OR2_PRELIM
+#define CONFIG_SYS_BR3_PRELIM	(SDRAM_BASE3_PRELIM | 0x00000081)
 
 
 /*
@@ -292,23 +292,23 @@
  */
 
 /* periodic timer for refresh */
-#define CFG_MAMR_PTA	97		/* start with divider for 100 MHz	*/
+#define CONFIG_SYS_MAMR_PTA	97		/* start with divider for 100 MHz	*/
 
 /* refresh rate 15.6 us (= 64 ms / 4K = 62.4 / quad bursts) for <= 128 MBit	*/
-#define CFG_MPTPR_2BK_4K	MPTPR_PTP_DIV16		/* setting for 2 banks	*/
-#define CFG_MPTPR_1BK_4K	MPTPR_PTP_DIV32		/* setting for 1 bank	*/
+#define CONFIG_SYS_MPTPR_2BK_4K	MPTPR_PTP_DIV16		/* setting for 2 banks	*/
+#define CONFIG_SYS_MPTPR_1BK_4K	MPTPR_PTP_DIV32		/* setting for 1 bank	*/
 
 /* refresh rate 7.8 us (= 64 ms / 8K = 31.2 / quad bursts) for 256 MBit		*/
-#define CFG_MPTPR_2BK_8K	MPTPR_PTP_DIV8		/* setting for 2 banks	*/
-#define CFG_MPTPR_1BK_8K	MPTPR_PTP_DIV16		/* setting for 1 bank	*/
+#define CONFIG_SYS_MPTPR_2BK_8K	MPTPR_PTP_DIV8		/* setting for 2 banks	*/
+#define CONFIG_SYS_MPTPR_1BK_8K	MPTPR_PTP_DIV16		/* setting for 1 bank	*/
 
 /*
  * MAMR settings for SDRAM
  */
 
 /* 8 column SDRAM */
-#define CFG_MAMR_8COL	0x18803112
-#define CFG_MAMR_9COL	0x18803112	/* same as 8 column because its just easier to port with*/
+#define CONFIG_SYS_MAMR_8COL	0x18803112
+#define CONFIG_SYS_MAMR_9COL	0x18803112	/* same as 8 column because its just easier to port with*/
 
 
 /*
diff --git a/include/configs/ETX094.h b/include/configs/ETX094.h
index 525051fb5..c36f2bb18 100644
--- a/include/configs/ETX094.h
+++ b/include/configs/ETX094.h
@@ -76,7 +76,7 @@
 #define CONFIG_BOOTCOMMAND CONFIG_RAMBOOTCOMMAND
 
 #define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
-#undef	CFG_LOADS_BAUD_CHANGE		/* don't allow baudrate change	*/
+#undef	CONFIG_SYS_LOADS_BAUD_CHANGE		/* don't allow baudrate change	*/
 
 #define	CONFIG_WATCHDOG		1	/* watchdog enabled		*/
 
@@ -102,25 +102,25 @@
 /*
  * Miscellaneous configurable options
  */
-#define	CFG_LONGHELP			/* undef to save memory		*/
-#define	CFG_PROMPT	"=> "		/* Monitor Command Prompt	*/
+#define	CONFIG_SYS_LONGHELP			/* undef to save memory		*/
+#define	CONFIG_SYS_PROMPT	"=> "		/* Monitor Command Prompt	*/
 #if defined(CONFIG_CMD_KGDB)
-#define	CFG_CBSIZE	1024		/* Console I/O Buffer Size	*/
+#define	CONFIG_SYS_CBSIZE	1024		/* Console I/O Buffer Size	*/
 #else
-#define	CFG_CBSIZE	256		/* Console I/O Buffer Size	*/
+#define	CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size	*/
 #endif
-#define	CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define	CFG_MAXARGS	16		/* max number of command args	*/
-#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+#define	CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define	CONFIG_SYS_MAXARGS	16		/* max number of command args	*/
+#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
 
-#define CFG_MEMTEST_START	0x0300000	/* memtest works on	*/
-#define CFG_MEMTEST_END		0x0700000	/* 3 ... 7 MB in DRAM	*/
+#define CONFIG_SYS_MEMTEST_START	0x0300000	/* memtest works on	*/
+#define CONFIG_SYS_MEMTEST_END		0x0700000	/* 3 ... 7 MB in DRAM	*/
 
-#define	CFG_LOAD_ADDR		0x100000	/* default load address	*/
+#define	CONFIG_SYS_LOAD_ADDR		0x100000	/* default load address	*/
 
-#define	CFG_HZ		1000		/* decrementer freq: 1 ms ticks	*/
+#define	CONFIG_SYS_HZ		1000		/* decrementer freq: 1 ms ticks	*/
 
-#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
 
 /*
  * Low Level Configuration Settings
@@ -130,69 +130,69 @@
 /*-----------------------------------------------------------------------
  * Internal Memory Mapped Register
  */
-#define CFG_IMMR		0xFFF00000
+#define CONFIG_SYS_IMMR		0xFFF00000
 
 /*-----------------------------------------------------------------------
  * Definitions for initial stack pointer and data area (in DPRAM)
  */
-#define CFG_INIT_RAM_ADDR	CFG_IMMR
-#define	CFG_INIT_RAM_END	0x2F00	/* End of used area in DPRAM	*/
-#define	CFG_GBL_DATA_SIZE	64  /* size in bytes reserved for initial data */
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define	CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_IMMR
+#define	CONFIG_SYS_INIT_RAM_END	0x2F00	/* End of used area in DPRAM	*/
+#define	CONFIG_SYS_GBL_DATA_SIZE	64  /* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define	CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
 /*-----------------------------------------------------------------------
  * Start addresses for the final memory configuration
  * (Set up by the startup code)
- * Please note that CFG_SDRAM_BASE _must_ start at 0
+ * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
  */
-#define	CFG_SDRAM_BASE		0x00000000
-#define CFG_FLASH_BASE		0x40000000
+#define	CONFIG_SYS_SDRAM_BASE		0x00000000
+#define CONFIG_SYS_FLASH_BASE		0x40000000
 #ifdef	DEBUG
-#define	CFG_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor	*/
+#define	CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor	*/
 #else
-#define	CFG_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor	*/
+#define	CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor	*/
 #endif
-#define CFG_MONITOR_BASE	CFG_FLASH_BASE
-#define	CFG_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/
+#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_FLASH_BASE
+#define	CONFIG_SYS_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/
 
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define	CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux	*/
+#define	CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux	*/
 /*-----------------------------------------------------------------------
  * FLASH organization
  */
-#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
-#define CFG_MAX_FLASH_SECT	35	/* max number of sectors on one chip	*/
+#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
+#define CONFIG_SYS_MAX_FLASH_SECT	35	/* max number of sectors on one chip	*/
 
-#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
-#define CFG_FLASH_WRITE_TOUT	1000	/* Timeout for Flash Write (in ms)	*/
+#define CONFIG_SYS_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
+#define CONFIG_SYS_FLASH_WRITE_TOUT	1000	/* Timeout for Flash Write (in ms)	*/
 
-#define	CFG_ENV_IS_IN_FLASH	1
+#define	CONFIG_ENV_IS_IN_FLASH	1
 #ifdef CONFIG_FLASH_16BIT
-#define CFG_ENV_OFFSET		0x8000	/* Offset   of Environment Sector	*/
-#define	CFG_ENV_SIZE		0x8000	/* Total Size of Environment Sector	*/
+#define CONFIG_ENV_OFFSET		0x8000	/* Offset   of Environment Sector	*/
+#define	CONFIG_ENV_SIZE		0x8000	/* Total Size of Environment Sector	*/
 #else
-#define CFG_ENV_OFFSET		0x8000	/* Offset   of Environment Sector	*/
-#define	CFG_ENV_SIZE		0x4000	/* Total Size of Environment Sector	*/
+#define CONFIG_ENV_OFFSET		0x8000	/* Offset   of Environment Sector	*/
+#define	CONFIG_ENV_SIZE		0x4000	/* Total Size of Environment Sector	*/
 #endif
 
 /*-----------------------------------------------------------------------
  * Hardware Information Block
  */
-#define CFG_HWINFO_OFFSET	0x0003FFC0	/* offset of HW Info block */
-#define CFG_HWINFO_SIZE		0x00000040	/* size   of HW Info block */
-#define CFG_HWINFO_MAGIC	0x54514D38	/* 'TQM8' */
+#define CONFIG_SYS_HWINFO_OFFSET	0x0003FFC0	/* offset of HW Info block */
+#define CONFIG_SYS_HWINFO_SIZE		0x00000040	/* size   of HW Info block */
+#define CONFIG_SYS_HWINFO_MAGIC	0x54514D38	/* 'TQM8' */
 
 /*-----------------------------------------------------------------------
  * Cache Configuration
  */
-#define CFG_CACHELINE_SIZE	16	/* For all MPC8xx CPUs			*/
+#define CONFIG_SYS_CACHELINE_SIZE	16	/* For all MPC8xx CPUs			*/
 #if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT	4	/* log base 2 of the above value	*/
+#define CONFIG_SYS_CACHELINE_SHIFT	4	/* log base 2 of the above value	*/
 #endif
 
 /*-----------------------------------------------------------------------
@@ -202,10 +202,10 @@
  * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze
  */
 #if defined(CONFIG_WATCHDOG)
-#define CFG_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
+#define CONFIG_SYS_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
 			 SYPCR_SWE  | SYPCR_SWRI| SYPCR_SWP)
 #else
-#define CFG_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
+#define CONFIG_SYS_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
 #endif	/* CONFIG_WATCHDOG */
 
 /*-----------------------------------------------------------------------
@@ -213,27 +213,27 @@
  *-----------------------------------------------------------------------
  * PCMCIA config., multi-function pin tri-state
  */
-#define CFG_SIUMCR	(SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_MLRC01)
+#define CONFIG_SYS_SIUMCR	(SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_MLRC01)
 
 /*-----------------------------------------------------------------------
  * TBSCR - Time Base Status and Control				11-26
  *-----------------------------------------------------------------------
  * Clear Reference Interrupt Status, Timebase freezing enabled
  */
-#define CFG_TBSCR	(TBSCR_REFA | TBSCR_REFB | TBSCR_TBF)
+#define CONFIG_SYS_TBSCR	(TBSCR_REFA | TBSCR_REFB | TBSCR_TBF)
 
 /*-----------------------------------------------------------------------
  * RTCSC - Real-Time Clock Status and Control Register		11-27
  *-----------------------------------------------------------------------
  */
-#define CFG_RTCSC	(RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE)
+#define CONFIG_SYS_RTCSC	(RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE)
 
 /*-----------------------------------------------------------------------
  * PISCR - Periodic Interrupt Status and Control		11-31
  *-----------------------------------------------------------------------
  * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
  */
-#define CFG_PISCR	(PISCR_PS | PISCR_PITF)
+#define CONFIG_SYS_PISCR	(PISCR_PS | PISCR_PITF)
 
 /*-----------------------------------------------------------------------
  * PLPRCR - PLL, Low-Power, and Reset Control Register		15-30
@@ -241,7 +241,7 @@
  * Reset PLL lock status sticky bit, timer expired status bit and timer
  * interrupt status bit - leave PLL multiplication factor unchanged !
  */
-#define CFG_PLPRCR	(PLPRCR_SPLSS | PLPRCR_TEXPS | PLPRCR_TMIST)
+#define CONFIG_SYS_PLPRCR	(PLPRCR_SPLSS | PLPRCR_TEXPS | PLPRCR_TMIST)
 
 /*-----------------------------------------------------------------------
  * SCCR - System Clock and reset Control Register		15-27
@@ -250,7 +250,7 @@
  * power management and some other internal clocks
  */
 #define SCCR_MASK	SCCR_EBDF11
-#define CFG_SCCR	(SCCR_TBS     | \
+#define CONFIG_SYS_SCCR	(SCCR_TBS     | \
 			 SCCR_COM00   | SCCR_DFSYNC00 | SCCR_DFBRG00  | \
 			 SCCR_DFNL000 | SCCR_DFNH000  | SCCR_DFLCD000 | \
 			 SCCR_DFALCD00)
@@ -260,21 +260,21 @@
  *-----------------------------------------------------------------------
  *
  */
-#define CFG_PCMCIA_MEM_ADDR	(0xE0000000)
-#define CFG_PCMCIA_MEM_SIZE	( 64 << 20 )
-#define CFG_PCMCIA_DMA_ADDR	(0xE4000000)
-#define CFG_PCMCIA_DMA_SIZE	( 64 << 20 )
-#define CFG_PCMCIA_ATTRB_ADDR	(0xE8000000)
-#define CFG_PCMCIA_ATTRB_SIZE	( 64 << 20 )
-#define CFG_PCMCIA_IO_ADDR	(0xEC000000)
-#define CFG_PCMCIA_IO_SIZE	( 64 << 20 )
+#define CONFIG_SYS_PCMCIA_MEM_ADDR	(0xE0000000)
+#define CONFIG_SYS_PCMCIA_MEM_SIZE	( 64 << 20 )
+#define CONFIG_SYS_PCMCIA_DMA_ADDR	(0xE4000000)
+#define CONFIG_SYS_PCMCIA_DMA_SIZE	( 64 << 20 )
+#define CONFIG_SYS_PCMCIA_ATTRB_ADDR	(0xE8000000)
+#define CONFIG_SYS_PCMCIA_ATTRB_SIZE	( 64 << 20 )
+#define CONFIG_SYS_PCMCIA_IO_ADDR	(0xEC000000)
+#define CONFIG_SYS_PCMCIA_IO_SIZE	( 64 << 20 )
 
 /*-----------------------------------------------------------------------
  *
  *-----------------------------------------------------------------------
  *
  */
-#define CFG_DER	0
+#define CONFIG_SYS_DER	0
 
 /*
  * Init Memory Controller:
@@ -289,26 +289,26 @@
  * restrict access enough to keep SRAM working (if any)
  * but not too much to meddle with FLASH accesses
  */
-#define CFG_REMAP_OR_AM		0x80000000	/* OR addr mask */
-#define CFG_PRELIM_OR_AM	0xE0000000	/* OR addr mask */
+#define CONFIG_SYS_REMAP_OR_AM		0x80000000	/* OR addr mask */
+#define CONFIG_SYS_PRELIM_OR_AM	0xE0000000	/* OR addr mask */
 
 /* FLASH timing: ACS = 11, TRLX = 1, CSNT = 0, SCY = 2, EHTR = 0	*/
-#define CFG_OR_TIMING_FLASH    (OR_ACS_DIV2 | OR_BI | \
+#define CONFIG_SYS_OR_TIMING_FLASH    (OR_ACS_DIV2 | OR_BI | \
 			       OR_SCY_2_CLK | OR_TRLX )
 
-#define CFG_OR0_REMAP	(CFG_REMAP_OR_AM  | CFG_OR_TIMING_FLASH)
-#define CFG_OR0_PRELIM	(CFG_PRELIM_OR_AM | CFG_OR_TIMING_FLASH)
+#define CONFIG_SYS_OR0_REMAP	(CONFIG_SYS_REMAP_OR_AM  | CONFIG_SYS_OR_TIMING_FLASH)
+#define CONFIG_SYS_OR0_PRELIM	(CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_FLASH)
 
 #ifdef CONFIG_FLASH_16BIT	/* 16 bit data port */
-#define CFG_BR0_PRELIM	((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_V | BR_PS_16)
-#define CFG_BR1_PRELIM	((FLASH_BASE1_PRELIM & BR_BA_MSK) | BR_V | BR_PS_16)
+#define CONFIG_SYS_BR0_PRELIM	((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_V | BR_PS_16)
+#define CONFIG_SYS_BR1_PRELIM	((FLASH_BASE1_PRELIM & BR_BA_MSK) | BR_V | BR_PS_16)
 #else				/* 32 bit data port */
-#define CFG_BR0_PRELIM	((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_V | BR_PS_32)
-#define CFG_BR1_PRELIM	((FLASH_BASE1_PRELIM & BR_BA_MSK) | BR_V | BR_PS_32)
+#define CONFIG_SYS_BR0_PRELIM	((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_V | BR_PS_32)
+#define CONFIG_SYS_BR1_PRELIM	((FLASH_BASE1_PRELIM & BR_BA_MSK) | BR_V | BR_PS_32)
 #endif	/* CONFIG_FLASH_16BIT */
 
-#define CFG_OR1_REMAP	CFG_OR0_REMAP
-#define CFG_OR1_PRELIM	CFG_OR0_PRELIM
+#define CONFIG_SYS_OR1_REMAP	CONFIG_SYS_OR0_REMAP
+#define CONFIG_SYS_OR1_PRELIM	CONFIG_SYS_OR0_PRELIM
 
 /*
  * BR2/3 and OR2/3 (SDRAM)
@@ -319,39 +319,39 @@
 #define	SDRAM_MAX_SIZE		0x04000000	/* max 64 MB per bank	*/
 
 /* SDRAM timing: Multiplexed addresses, GPL5 output to GPL5_A (don't care)	*/
-#define CFG_OR_TIMING_SDRAM	0x00000A00
+#define CONFIG_SYS_OR_TIMING_SDRAM	0x00000A00
 
-#define CFG_OR2_PRELIM	(CFG_PRELIM_OR_AM | CFG_OR_TIMING_SDRAM )
-#define CFG_BR2_PRELIM	((SDRAM_BASE2_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
+#define CONFIG_SYS_OR2_PRELIM	(CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_SDRAM )
+#define CONFIG_SYS_BR2_PRELIM	((SDRAM_BASE2_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
 
-#define	CFG_OR3_PRELIM	CFG_OR2_PRELIM
-#define CFG_BR3_PRELIM	((SDRAM_BASE3_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
+#define	CONFIG_SYS_OR3_PRELIM	CONFIG_SYS_OR2_PRELIM
+#define CONFIG_SYS_BR3_PRELIM	((SDRAM_BASE3_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
 
 /*
  * Memory Periodic Timer Prescaler
  */
 
 /* periodic timer for refresh */
-#define CFG_MAMR_PTA	23		/* start with divider for 100 MHz	*/
+#define CONFIG_SYS_MAMR_PTA	23		/* start with divider for 100 MHz	*/
 
 /* refresh rate 15.6 us (= 64 ms / 4K = 62.4 / quad bursts) for <= 128 MBit	*/
-#define CFG_MPTPR_2BK_4K	MPTPR_PTP_DIV16		/* setting for 2 banks	*/
-#define CFG_MPTPR_1BK_4K	MPTPR_PTP_DIV32		/* setting for 1 bank	*/
+#define CONFIG_SYS_MPTPR_2BK_4K	MPTPR_PTP_DIV16		/* setting for 2 banks	*/
+#define CONFIG_SYS_MPTPR_1BK_4K	MPTPR_PTP_DIV32		/* setting for 1 bank	*/
 
 /* refresh rate 7.8 us (= 64 ms / 8K = 31.2 / quad bursts) for 256 MBit		*/
-#define CFG_MPTPR_2BK_8K	MPTPR_PTP_DIV8		/* setting for 2 banks	*/
-#define CFG_MPTPR_1BK_8K	MPTPR_PTP_DIV16		/* setting for 1 bank	*/
+#define CONFIG_SYS_MPTPR_2BK_8K	MPTPR_PTP_DIV8		/* setting for 2 banks	*/
+#define CONFIG_SYS_MPTPR_1BK_8K	MPTPR_PTP_DIV16		/* setting for 1 bank	*/
 
 /*
  * MAMR settings for SDRAM
  */
 
 /* 8 column SDRAM */
-#define CFG_MAMR_8COL	((CFG_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
+#define CONFIG_SYS_MAMR_8COL	((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
 			 MAMR_AMA_TYPE_0 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A11 |	\
 			 MAMR_RLFA_1X	 | MAMR_WLFA_1X	   | MAMR_TLFA_1X)
 /* 9 column SDRAM */
-#define CFG_MAMR_9COL	((CFG_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
+#define CONFIG_SYS_MAMR_9COL	((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
 			 MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 |	\
 			 MAMR_RLFA_1X	 | MAMR_WLFA_1X	   | MAMR_TLFA_1X)
 
diff --git a/include/configs/EVB64260.h b/include/configs/EVB64260.h
index c9d8c271b..bf41c13bd 100644
--- a/include/configs/EVB64260.h
+++ b/include/configs/EVB64260.h
@@ -40,7 +40,7 @@
  */
 
 #define CONFIG_EVB64260		1	/* this is an EVB64260 board	*/
-#define CFG_GT_6426x        GT_64260 /* with a 64260 system controller */
+#define CONFIG_SYS_GT_6426x        GT_64260 /* with a 64260 system controller */
 
 #define CONFIG_BAUDRATE		38400	/* console baudrate = 38400	*/
 
@@ -52,13 +52,13 @@
 #define CONFIG_BOARD_EARLY_INIT_F 1
 
 #ifndef CONFIG_EVB64260_750CX
-#define CFG_BOARD_NAME		"EVB64260"
+#define CONFIG_SYS_BOARD_NAME		"EVB64260"
 #else
-#define CFG_BOARD_NAME         "EVB64260-750CX"
+#define CONFIG_SYS_BOARD_NAME         "EVB64260-750CX"
 #endif
 
-#define CFG_HUSH_PARSER
-#define CFG_PROMPT_HUSH_PS2	"> "
+#define CONFIG_SYS_HUSH_PARSER
+#define CONFIG_SYS_PROMPT_HUSH_PS2	"> "
 
 /*
  * The following defines let you select what serial you want to use
@@ -66,7 +66,7 @@
  *
  * what to do:
  * to use the DUART, undef CONFIG_MPSC.  If you have hacked a serial
- * cable onto the second DUART channel, change the CFG_DUART port from 1
+ * cable onto the second DUART channel, change the CONFIG_SYS_DUART port from 1
  * to 0 below.
  *
  * to use the MPSC, #define CONFIG_MPSC.  If you have wired up another
@@ -98,7 +98,7 @@
 	"bootm"
 
 #define CONFIG_LOADS_ECHO	0	/* echo off for serial download	*/
-#define	CFG_LOADS_BAUD_CHANGE		/* allow baudrate changes	*/
+#define	CONFIG_SYS_LOADS_BAUD_CHANGE		/* allow baudrate changes	*/
 
 #undef	CONFIG_WATCHDOG			/* watchdog disabled		*/
 #undef	CONFIG_ALTIVEC                  /* undef to disable             */
@@ -124,31 +124,31 @@
 /*
  * Miscellaneous configurable options
  */
-#define	CFG_LONGHELP			/* undef to save memory		*/
-#define	CFG_PROMPT	"=> "		/* Monitor Command Prompt	*/
+#define	CONFIG_SYS_LONGHELP			/* undef to save memory		*/
+#define	CONFIG_SYS_PROMPT	"=> "		/* Monitor Command Prompt	*/
 #if defined(CONFIG_CMD_KGDB)
-#define	CFG_CBSIZE	1024		/* Console I/O Buffer Size	*/
+#define	CONFIG_SYS_CBSIZE	1024		/* Console I/O Buffer Size	*/
 #else
-#define	CFG_CBSIZE	256		/* Console I/O Buffer Size	*/
+#define	CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size	*/
 #endif
-#define	CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define	CFG_MAXARGS	16		/* max number of command args	*/
-#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+#define	CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define	CONFIG_SYS_MAXARGS	16		/* max number of command args	*/
+#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
 
-#define CFG_MEMTEST_START	0x00400000	/* memtest works on	*/
-#define CFG_MEMTEST_END		0x00C00000	/* 4 ... 12 MB in DRAM	*/
+#define CONFIG_SYS_MEMTEST_START	0x00400000	/* memtest works on	*/
+#define CONFIG_SYS_MEMTEST_END		0x00C00000	/* 4 ... 12 MB in DRAM	*/
 
-#define	CFG_LOAD_ADDR		0x00300000	/* default load address	*/
+#define	CONFIG_SYS_LOAD_ADDR		0x00300000	/* default load address	*/
 
-#define	CFG_HZ			1000		/* decr freq: 1ms ticks	*/
-#define CFG_BUS_HZ		100000000	/* 100 MHz		*/
-#define CFG_BUS_CLK		CFG_BUS_HZ
+#define	CONFIG_SYS_HZ			1000		/* decr freq: 1ms ticks	*/
+#define CONFIG_SYS_BUS_HZ		100000000	/* 100 MHz		*/
+#define CONFIG_SYS_BUS_CLK		CONFIG_SYS_BUS_HZ
 
-#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
 
 #ifdef CONFIG_EVB64260_750CX
 #define CONFIG_750CX
-#define CFG_BROKEN_CL2
+#define CONFIG_SYS_BROKEN_CL2
 #endif
 
 /*
@@ -160,51 +160,51 @@
 /*-----------------------------------------------------------------------
  * Definitions for initial stack pointer and data area
  */
-#define CFG_INIT_RAM_ADDR	0x40000000
-#define	CFG_INIT_RAM_END	0x1000
-#define	CFG_GBL_DATA_SIZE	128  /* size in bytes reserved for init data */
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_RAM_LOCK
+#define CONFIG_SYS_INIT_RAM_ADDR	0x40000000
+#define	CONFIG_SYS_INIT_RAM_END	0x1000
+#define	CONFIG_SYS_GBL_DATA_SIZE	128  /* size in bytes reserved for init data */
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_RAM_LOCK
 
 
 /*-----------------------------------------------------------------------
  * Start addresses for the final memory configuration
  * (Set up by the startup code)
- * Please note that CFG_SDRAM_BASE _must_ start at 0
+ * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
  */
-#define	CFG_SDRAM_BASE		0x00000000
-#define CFG_FLASH_BASE		0xfff00000
-#define CFG_RESET_ADDRESS	0xfff00100
-#define	CFG_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor */
-#define CFG_MONITOR_BASE	CFG_FLASH_BASE
-#define	CFG_MALLOC_LEN		(256 << 10)	/* Reserve 256 kB for malloc */
+#define	CONFIG_SYS_SDRAM_BASE		0x00000000
+#define CONFIG_SYS_FLASH_BASE		0xfff00000
+#define CONFIG_SYS_RESET_ADDRESS	0xfff00100
+#define	CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor */
+#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_FLASH_BASE
+#define	CONFIG_SYS_MALLOC_LEN		(256 << 10)	/* Reserve 256 kB for malloc */
 
 /* areas to map different things with the GT in physical space */
-#define CFG_DRAM_BANKS		4
-#define CFG_DFL_GT_REGS		0x14000000	/* boot time GT_REGS */
+#define CONFIG_SYS_DRAM_BANKS		4
+#define CONFIG_SYS_DFL_GT_REGS		0x14000000	/* boot time GT_REGS */
 
 /* What to put in the bats. */
-#define CFG_MISC_REGION_BASE	0xf0000000
+#define CONFIG_SYS_MISC_REGION_BASE	0xf0000000
 
 /* Peripheral Device section */
-#define CFG_GT_REGS		0xf8000000
-#define CFG_DEV_BASE		0xfc000000
-
-#define CFG_DEV0_SPACE		CFG_DEV_BASE
-#define CFG_DEV1_SPACE		(CFG_DEV0_SPACE + CFG_DEV0_SIZE)
-#define CFG_DEV2_SPACE		(CFG_DEV1_SPACE + CFG_DEV1_SIZE)
-#define CFG_DEV3_SPACE		(CFG_DEV2_SPACE + CFG_DEV2_SIZE)
-
-#define CFG_DEV0_SIZE		 _8M /* evb64260 sram  @ 0xfc00.0000 */
-#define CFG_DEV1_SIZE		 _8M /* evb64260 rtc   @ 0xfc80.0000 */
-#define CFG_DEV2_SIZE		_16M /* evb64260 duart @ 0xfd00.0000 */
-#define CFG_DEV3_SIZE		_16M /* evb64260 flash @ 0xfe00.0000 */
-
-#define CFG_DEV0_PAR		0x20205093
-#define CFG_DEV1_PAR		0xcfcfffff
-#define CFG_DEV2_PAR		0xc0059bd4
-#define CFG_8BIT_BOOT_PAR	0xc00b5e7c
-#define CFG_32BIT_BOOT_PAR	0xc4a8241c
+#define CONFIG_SYS_GT_REGS		0xf8000000
+#define CONFIG_SYS_DEV_BASE		0xfc000000
+
+#define CONFIG_SYS_DEV0_SPACE		CONFIG_SYS_DEV_BASE
+#define CONFIG_SYS_DEV1_SPACE		(CONFIG_SYS_DEV0_SPACE + CONFIG_SYS_DEV0_SIZE)
+#define CONFIG_SYS_DEV2_SPACE		(CONFIG_SYS_DEV1_SPACE + CONFIG_SYS_DEV1_SIZE)
+#define CONFIG_SYS_DEV3_SPACE		(CONFIG_SYS_DEV2_SPACE + CONFIG_SYS_DEV2_SIZE)
+
+#define CONFIG_SYS_DEV0_SIZE		 _8M /* evb64260 sram  @ 0xfc00.0000 */
+#define CONFIG_SYS_DEV1_SIZE		 _8M /* evb64260 rtc   @ 0xfc80.0000 */
+#define CONFIG_SYS_DEV2_SIZE		_16M /* evb64260 duart @ 0xfd00.0000 */
+#define CONFIG_SYS_DEV3_SIZE		_16M /* evb64260 flash @ 0xfe00.0000 */
+
+#define CONFIG_SYS_DEV0_PAR		0x20205093
+#define CONFIG_SYS_DEV1_PAR		0xcfcfffff
+#define CONFIG_SYS_DEV2_PAR		0xc0059bd4
+#define CONFIG_SYS_8BIT_BOOT_PAR	0xc00b5e7c
+#define CONFIG_SYS_32BIT_BOOT_PAR	0xc4a8241c
 	/*   c    4    a      8     2     4    1      c		*/
 	/* 33 22|2222|22 22|111 1|11 11|1 1  |    |		*/
 	/* 10 98|7654|32 10|987 6|54 32|1 098|7 654|3 210	*/
@@ -212,19 +212,19 @@
 	/*  3| 0|.... ..| 2| 4 |  0 |  4 |  8  |  3  | 4	*/
 
 #if 0 /* Wrong?? NTL */
-#define CFG_MPP_CONTROL_0	0x53541717	/* InitAct EOT[4] DBurst TCEn[1] */
+#define CONFIG_SYS_MPP_CONTROL_0	0x53541717	/* InitAct EOT[4] DBurst TCEn[1] */
 						/* DMAAck[1:0] GNT0[1:0] */
 #else
-#define CFG_MPP_CONTROL_0	0x53547777	/* InitAct EOT[4] DBurst TCEn[1] */
+#define CONFIG_SYS_MPP_CONTROL_0	0x53547777	/* InitAct EOT[4] DBurst TCEn[1] */
 						/* REQ0[1:0] GNT0[1:0] */
 #endif
-#define CFG_MPP_CONTROL_1	0x44009911	/* TCEn[4] TCTcnt[4] GPP[13:12] */
+#define CONFIG_SYS_MPP_CONTROL_1	0x44009911	/* TCEn[4] TCTcnt[4] GPP[13:12] */
 						/* DMAReq[4] DMAAck[4] WDNMI WDE */
 #if 0 /* Wrong?? NTL */
-#define CFG_MPP_CONTROL_2	0x40091818	/* TCTcnt[0] GPP[22:21] BClkIn */
+#define CONFIG_SYS_MPP_CONTROL_2	0x40091818	/* TCTcnt[0] GPP[22:21] BClkIn */
 						/* DMAAck[1:0] GNT1[1:0] */
 #else
-#define CFG_MPP_CONTROL_2	0x40098888	/* TCTcnt[0] */
+#define CONFIG_SYS_MPP_CONTROL_2	0x40098888	/* TCTcnt[0] */
 						/* GPP[22] (RS232IntB or PCI1Int) */
 						/* GPP[21] (RS323IntA) */
 						/* BClkIn */
@@ -232,10 +232,10 @@
 #endif
 
 #if 0 /* Wrong?? NTL */
-# define CFG_MPP_CONTROL_3	0x00090066	/* GPP[31:29] BClkOut0 */
+# define CONFIG_SYS_MPP_CONTROL_3	0x00090066	/* GPP[31:29] BClkOut0 */
 						/* GPP[27:26] Int[1:0] */
 #else
-# define CFG_MPP_CONTROL_3	0x22090066      /* MREQ MGNT */
+# define CONFIG_SYS_MPP_CONTROL_3	0x22090066      /* MREQ MGNT */
 						/* GPP[29]    (PCI1Int) */
 						/* BClkOut0 */
 						/* GPP[27]    (PCI0Int) */
@@ -243,17 +243,17 @@
 						/* CPUInt[25:24] */
 #endif
 
-# define CFG_SERIAL_PORT_MUX	0x00000102	/* 0=hiZ  1=MPSC0 2=ETH 0 and 2 RMII */
+# define CONFIG_SYS_SERIAL_PORT_MUX	0x00000102	/* 0=hiZ  1=MPSC0 2=ETH 0 and 2 RMII */
 
 #if 0 /* Wrong?? - NTL */
-# define CFG_GPP_LEVEL_CONTROL	0x000002c6
+# define CONFIG_SYS_GPP_LEVEL_CONTROL	0x000002c6
 #else
-# define CFG_GPP_LEVEL_CONTROL	0x2c600000	/* 0010 1100 0110 0000 */
+# define CONFIG_SYS_GPP_LEVEL_CONTROL	0x2c600000	/* 0010 1100 0110 0000 */
 						/* gpp[29] */
 						/* gpp[27:26] */
 						/* gpp[22:21] */
 
-# define CFG_SDRAM_CONFIG	0xd8e18200	/* 0x448 */
+# define CONFIG_SYS_SDRAM_CONFIG	0xd8e18200	/* 0x448 */
 				/* idmas use buffer 1,1
 				   comm use buffer 0
 				   pci use buffer 1,1
@@ -270,12 +270,12 @@
 				/* 1  0  0x200 */
 #endif
 
-#define CFG_DUART_IO		CFG_DEV2_SPACE
-#define CFG_DUART_CHAN		1		/* channel to use for console */
-#define CFG_INIT_CHAN1
-#define CFG_INIT_CHAN2
+#define CONFIG_SYS_DUART_IO		CONFIG_SYS_DEV2_SPACE
+#define CONFIG_SYS_DUART_CHAN		1		/* channel to use for console */
+#define CONFIG_SYS_INIT_CHAN1
+#define CONFIG_SYS_INIT_CHAN2
 
-#define SRAM_BASE		CFG_DEV0_SPACE
+#define SRAM_BASE		CONFIG_SYS_DEV0_SPACE
 #define SRAM_SIZE		0x00100000		/* 1 MB of sram */
 
 
@@ -293,37 +293,37 @@
 #define CONFIG_PCI_PNP                  /* do pci plug-and-play         */
 
 /* PCI MEMORY MAP section */
-#define CFG_PCI0_MEM_BASE	0x80000000
-#define CFG_PCI0_MEM_SIZE	_128M
-#define CFG_PCI1_MEM_BASE	0x88000000
-#define CFG_PCI1_MEM_SIZE	_128M
+#define CONFIG_SYS_PCI0_MEM_BASE	0x80000000
+#define CONFIG_SYS_PCI0_MEM_SIZE	_128M
+#define CONFIG_SYS_PCI1_MEM_BASE	0x88000000
+#define CONFIG_SYS_PCI1_MEM_SIZE	_128M
 
-#define CFG_PCI0_0_MEM_SPACE	(CFG_PCI0_MEM_BASE)
-#define CFG_PCI1_0_MEM_SPACE	(CFG_PCI1_MEM_BASE)
+#define CONFIG_SYS_PCI0_0_MEM_SPACE	(CONFIG_SYS_PCI0_MEM_BASE)
+#define CONFIG_SYS_PCI1_0_MEM_SPACE	(CONFIG_SYS_PCI1_MEM_BASE)
 
 
 /* PCI I/O MAP section */
-#define CFG_PCI0_IO_BASE	0xfa000000
-#define CFG_PCI0_IO_SIZE	_16M
-#define CFG_PCI1_IO_BASE	0xfb000000
-#define CFG_PCI1_IO_SIZE	_16M
+#define CONFIG_SYS_PCI0_IO_BASE	0xfa000000
+#define CONFIG_SYS_PCI0_IO_SIZE	_16M
+#define CONFIG_SYS_PCI1_IO_BASE	0xfb000000
+#define CONFIG_SYS_PCI1_IO_SIZE	_16M
 
-#define CFG_PCI0_IO_SPACE	(CFG_PCI0_IO_BASE)
-#define CFG_PCI0_IO_SPACE_PCI	0x00000000
-#define CFG_PCI1_IO_SPACE	(CFG_PCI1_IO_BASE)
-#define CFG_PCI1_IO_SPACE_PCI	0x00000000
+#define CONFIG_SYS_PCI0_IO_SPACE	(CONFIG_SYS_PCI0_IO_BASE)
+#define CONFIG_SYS_PCI0_IO_SPACE_PCI	0x00000000
+#define CONFIG_SYS_PCI1_IO_SPACE	(CONFIG_SYS_PCI1_IO_BASE)
+#define CONFIG_SYS_PCI1_IO_SPACE_PCI	0x00000000
 
 /*
  * NS16550 Configuration
  */
-#define CFG_NS16550
+#define CONFIG_SYS_NS16550
 
-#define CFG_NS16550_REG_SIZE	-4
+#define CONFIG_SYS_NS16550_REG_SIZE	-4
 
-#define CFG_NS16550_CLK		3686400
+#define CONFIG_SYS_NS16550_CLK		3686400
 
-#define CFG_NS16550_COM1	(CFG_DUART_IO + 0)
-#define CFG_NS16550_COM2	(CFG_DUART_IO + 0x20)
+#define CONFIG_SYS_NS16550_COM1	(CONFIG_SYS_DUART_IO + 0)
+#define CONFIG_SYS_NS16550_COM2	(CONFIG_SYS_DUART_IO + 0x20)
 
 /*----------------------------------------------------------------------
  * Initial BAT mappings
@@ -335,32 +335,32 @@
  */
 
 /* SDRAM */
-#define CFG_IBAT0L (CFG_SDRAM_BASE | BATL_PP_RW | BATL_CACHEINHIBIT)
-#define CFG_IBAT0U (CFG_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
-#define CFG_DBAT0L (CFG_SDRAM_BASE | BATL_PP_RW | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
-#define CFG_DBAT0U CFG_IBAT0U
+#define CONFIG_SYS_IBAT0L (CONFIG_SYS_SDRAM_BASE | BATL_PP_RW | BATL_CACHEINHIBIT)
+#define CONFIG_SYS_IBAT0U (CONFIG_SYS_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CONFIG_SYS_DBAT0L (CONFIG_SYS_SDRAM_BASE | BATL_PP_RW | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
+#define CONFIG_SYS_DBAT0U CONFIG_SYS_IBAT0U
 
 /* init ram */
-#define CFG_IBAT1L  (CFG_INIT_RAM_ADDR | BATL_PP_RW | BATL_MEMCOHERENCE)
-#define CFG_IBAT1U  (CFG_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP)
-#define CFG_DBAT1L  CFG_IBAT1L
-#define CFG_DBAT1U  CFG_IBAT1U
+#define CONFIG_SYS_IBAT1L  (CONFIG_SYS_INIT_RAM_ADDR | BATL_PP_RW | BATL_MEMCOHERENCE)
+#define CONFIG_SYS_IBAT1U  (CONFIG_SYS_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP)
+#define CONFIG_SYS_DBAT1L  CONFIG_SYS_IBAT1L
+#define CONFIG_SYS_DBAT1U  CONFIG_SYS_IBAT1U
 
 /* PCI0, PCI1 in one BAT */
-#define CFG_IBAT2L BATL_NO_ACCESS
-#define CFG_IBAT2U CFG_DBAT2U
-#define CFG_DBAT2L (CFG_PCI0_MEM_BASE | BATL_CACHEINHIBIT | BATL_PP_RW | BATL_GUARDEDSTORAGE)
-#define CFG_DBAT2U (CFG_PCI0_MEM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CONFIG_SYS_IBAT2L BATL_NO_ACCESS
+#define CONFIG_SYS_IBAT2U CONFIG_SYS_DBAT2U
+#define CONFIG_SYS_DBAT2L (CONFIG_SYS_PCI0_MEM_BASE | BATL_CACHEINHIBIT | BATL_PP_RW | BATL_GUARDEDSTORAGE)
+#define CONFIG_SYS_DBAT2U (CONFIG_SYS_PCI0_MEM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
 
 /* GT regs, bootrom, all the devices, PCI I/O */
-#define CFG_IBAT3L (CFG_MISC_REGION_BASE | BATL_CACHEINHIBIT | BATL_PP_RW)
-#define CFG_IBAT3U (CFG_MISC_REGION_BASE | BATU_VS | BATU_VP | BATU_BL_256M)
-#define CFG_DBAT3L (CFG_MISC_REGION_BASE | BATL_CACHEINHIBIT | BATL_PP_RW | BATL_GUARDEDSTORAGE)
-#define CFG_DBAT3U CFG_IBAT3U
+#define CONFIG_SYS_IBAT3L (CONFIG_SYS_MISC_REGION_BASE | BATL_CACHEINHIBIT | BATL_PP_RW)
+#define CONFIG_SYS_IBAT3U (CONFIG_SYS_MISC_REGION_BASE | BATU_VS | BATU_VP | BATU_BL_256M)
+#define CONFIG_SYS_DBAT3L (CONFIG_SYS_MISC_REGION_BASE | BATL_CACHEINHIBIT | BATL_PP_RW | BATL_GUARDEDSTORAGE)
+#define CONFIG_SYS_DBAT3U CONFIG_SYS_IBAT3U
 
 /* I2C speed and slave address (for compatability) defaults */
-#define CFG_I2C_SPEED	400000
-#define CFG_I2C_SLAVE	0x7F
+#define CONFIG_SYS_I2C_SPEED	400000
+#define CONFIG_SYS_I2C_SLAVE	0x7F
 
 /* I2C addresses for the two DIMM SPD chips */
 #ifndef CONFIG_EVB64260_750CX
@@ -376,32 +376,32 @@
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define	CFG_BOOTMAPSZ		(8<<20)	/* Initial Memory map for Linux */
+#define	CONFIG_SYS_BOOTMAPSZ		(8<<20)	/* Initial Memory map for Linux */
 
 /*-----------------------------------------------------------------------
  * FLASH organization
  */
-#define CFG_MAX_FLASH_BANKS	2	/* max number of memory banks	*/
-#define CFG_MAX_FLASH_SECT	67	/* max number of sectors on one chip */
+#define CONFIG_SYS_MAX_FLASH_BANKS	2	/* max number of memory banks	*/
+#define CONFIG_SYS_MAX_FLASH_SECT	67	/* max number of sectors on one chip */
 
-#define CFG_EXTRA_FLASH_DEVICE	DEVICE3	/* extra flash at device 3 */
-#define CFG_EXTRA_FLASH_WIDTH	4	/* 32 bit */
+#define CONFIG_SYS_EXTRA_FLASH_DEVICE	DEVICE3	/* extra flash at device 3 */
+#define CONFIG_SYS_EXTRA_FLASH_WIDTH	4	/* 32 bit */
 
-#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms) */
-#define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms) */
-#define CFG_FLASH_CFI		1
+#define CONFIG_SYS_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms) */
+#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms) */
+#define CONFIG_SYS_FLASH_CFI		1
 
-#define	CFG_ENV_IS_IN_FLASH	1
-#define	CFG_ENV_SIZE		0x1000	/* Total Size of Environment Sector */
-#define CFG_ENV_SECT_SIZE	0x10000
-#define CFG_ENV_ADDR    (CFG_FLASH_BASE+CFG_MONITOR_LEN-CFG_ENV_SECT_SIZE)
+#define	CONFIG_ENV_IS_IN_FLASH	1
+#define	CONFIG_ENV_SIZE		0x1000	/* Total Size of Environment Sector */
+#define CONFIG_ENV_SECT_SIZE	0x10000
+#define CONFIG_ENV_ADDR    (CONFIG_SYS_FLASH_BASE+CONFIG_SYS_MONITOR_LEN-CONFIG_ENV_SECT_SIZE)
 
 /*-----------------------------------------------------------------------
  * Cache Configuration
  */
-#define CFG_CACHELINE_SIZE	32	/* For all MPC74xx CPUs		 */
+#define CONFIG_SYS_CACHELINE_SIZE	32	/* For all MPC74xx CPUs		 */
 #if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value */
+#define CONFIG_SYS_CACHELINE_SHIFT	5	/* log base 2 of the above value */
 #endif
 
 /*-----------------------------------------------------------------------
@@ -409,7 +409,7 @@
  * look in include/74xx_7xx.h for the defines used here
  */
 
-#define CFG_L2
+#define CONFIG_SYS_L2
 
 #ifdef CONFIG_750CX
 #define L2_INIT		0
@@ -428,7 +428,7 @@
 #define	BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH */
 #define BOOTFLAG_WARM	0x02		/* Software reboot		    */
 
-#define CFG_BOARD_ASM_INIT      1
+#define CONFIG_SYS_BOARD_ASM_INIT      1
 
 
 #endif	/* __CONFIG_H */
diff --git a/include/configs/EXBITGEN.h b/include/configs/EXBITGEN.h
index 99d1cf255..1dd6e573d 100644
--- a/include/configs/EXBITGEN.h
+++ b/include/configs/EXBITGEN.h
@@ -43,22 +43,22 @@
 
 /* I2C configuration */
 #define CONFIG_HARD_I2C		1	/* I2C with hardware support	*/
-#define CFG_I2C_SPEED		40000	/* I2C speed			*/
-#define CFG_I2C_SLAVE		0x7F	/* I2C slave address		*/
+#define CONFIG_SYS_I2C_SPEED		40000	/* I2C speed			*/
+#define CONFIG_SYS_I2C_SLAVE		0x7F	/* I2C slave address		*/
 
 /* environment is in EEPROM */
-#define CFG_ENV_IS_IN_EEPROM    1
-#undef CFG_ENV_IS_IN_FLASH
-#undef CFG_ENV_IS_IN_NVRAM
-
-#ifdef CFG_ENV_IS_IN_EEPROM
-#define CFG_I2C_EEPROM_ADDR		0x56    /* 1010110 */
-#define CFG_I2C_EEPROM_ADDR_LEN		1	/* 8-bit internal addressing */
-#define CFG_I2C_EEPROM_ADDR_OVERFLOW	1	/* ... and 1 bit in I2C address */
-#define CFG_EEPROM_PAGE_WRITE_BITS	3	/* 4 bytes per page */
-#define CFG_EEPROM_PAGE_WRITE_DELAY_MS	40	/* write takes up to 40 msec */
-#define CFG_ENV_OFFSET		4	/* Offset of Environment Sector	*/
-#define	CFG_ENV_SIZE		350	/* that is 350 bytes only!	*/
+#define CONFIG_ENV_IS_IN_EEPROM    1
+#undef CONFIG_ENV_IS_IN_FLASH
+#undef CONFIG_ENV_IS_IN_NVRAM
+
+#ifdef CONFIG_ENV_IS_IN_EEPROM
+#define CONFIG_SYS_I2C_EEPROM_ADDR		0x56    /* 1010110 */
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN		1	/* 8-bit internal addressing */
+#define CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW	1	/* ... and 1 bit in I2C address */
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS	3	/* 4 bytes per page */
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	40	/* write takes up to 40 msec */
+#define CONFIG_ENV_OFFSET		4	/* Offset of Environment Sector	*/
+#define	CONFIG_ENV_SIZE		350	/* that is 350 bytes only!	*/
 #endif
 
 #define CONFIG_BOOTDELAY	10	/* autoboot after 10 seconds	*/
@@ -77,7 +77,7 @@
 				"ram=128M debug"
 
 #define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
-#define CFG_LOADS_BAUD_CHANGE	1	/* allow baudrate change	*/
+#define CONFIG_SYS_LOADS_BAUD_CHANGE	1	/* allow baudrate change	*/
 
 #define CONFIG_MII		1	/* MII PHY management		*/
 #define CONFIG_PHY_ADDR		0	/* PHY address			*/
@@ -88,6 +88,7 @@
  */
 #define CONFIG_BOOTP_BOOTFILESIZE
 #define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_PPC4xx_EMAC
 #define CONFIG_BOOTP_GATEWAY
 #define CONFIG_BOOTP_HOSTNAME
 
@@ -103,37 +104,37 @@
 /*
  * Miscellaneous configurable options
  */
-#define CFG_LONGHELP			/* undef to save memory		*/
-#define CFG_PROMPT	"=> "		/* Monitor Command Prompt	*/
+#define CONFIG_SYS_LONGHELP			/* undef to save memory		*/
+#define CONFIG_SYS_PROMPT	"=> "		/* Monitor Command Prompt	*/
 #if defined(CONFIG_CMD_KGDB)
-#define	CFG_CBSIZE	1024		/* Console I/O Buffer Size	*/
+#define	CONFIG_SYS_CBSIZE	1024		/* Console I/O Buffer Size	*/
 #else
-#define	CFG_CBSIZE	256		/* Console I/O Buffer Size	*/
+#define	CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size	*/
 #endif
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define CFG_MAXARGS	16		/* max number of command args	*/
-#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS	16		/* max number of command args	*/
+#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
 
-#define CFG_MEMTEST_START	0x0400000	/* memtest works on	*/
-#define CFG_MEMTEST_END		0x0C00000	/* 4 ... 12 MB in DRAM	*/
+#define CONFIG_SYS_MEMTEST_START	0x0400000	/* memtest works on	*/
+#define CONFIG_SYS_MEMTEST_END		0x0C00000	/* 4 ... 12 MB in DRAM	*/
 
 /* UART configuration */
-#define CFG_BASE_BAUD		691200
+#define CONFIG_SYS_BASE_BAUD		691200
 
 /* Default baud rate */
 #define CONFIG_BAUDRATE		115200
 
 /* The following table includes the supported baudrates */
-#define CFG_BAUDRATE_TABLE      \
+#define CONFIG_SYS_BAUDRATE_TABLE      \
 	{ 300, 600, 1200, 2400, 4800, 9600, 19200, 38400,     \
 	 57600, 115200, 230400, 460800, 921600 }
 
-#define CFG_CLKS_IN_HZ		1	/* everything, incl board info, in Hz */
+#define CONFIG_SYS_CLKS_IN_HZ		1	/* everything, incl board info, in Hz */
 
-#define CFG_LOAD_ADDR		0x100000	/* default load address */
-#define CFG_EXTBDINFO		1	/* To use extended board_into (bd_t) */
+#define CONFIG_SYS_LOAD_ADDR		0x100000	/* default load address */
+#define CONFIG_SYS_EXTBDINFO		1	/* To use extended board_into (bd_t) */
 
-#define	CFG_HZ			1000	/* decrementer freq: 1 ms ticks	*/
+#define	CONFIG_SYS_HZ			1000	/* decrementer freq: 1 ms ticks	*/
 
 /*-----------------------------------------------------------------------
  * PCI stuff
@@ -149,28 +150,28 @@
 #undef  CONFIG_IDE_LED                  /* no led for ide supported     */
 #undef  CONFIG_IDE_RESET                /* no reset for ide supported   */
 
-#define	CFG_KEY_REG_BASE_ADDR	0xF0100000
-#define	CFG_IR_REG_BASE_ADDR	0xF0200000
-#define	CFG_FPGA_REG_BASE_ADDR	0xF0300000
+#define	CONFIG_SYS_KEY_REG_BASE_ADDR	0xF0100000
+#define	CONFIG_SYS_IR_REG_BASE_ADDR	0xF0200000
+#define	CONFIG_SYS_FPGA_REG_BASE_ADDR	0xF0300000
 
 /*-----------------------------------------------------------------------
  * Start addresses for the final memory configuration
  * (Set up by the startup code)
- * Please note that CFG_SDRAM_BASE _must_ start at 0
+ * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
  */
-#define CFG_SDRAM_BASE		0x00000000
-#define CFG_FLASH0_BASE		0xFFF80000
-#define CFG_FLASH0_SIZE		0x00080000
-#define CFG_FLASH1_BASE		0x20000000
-#define CFG_FLASH1_SIZE		0x02000000
-#define CFG_FLASH_BASE		CFG_FLASH0_BASE
-#define CFG_FLASH_SIZE		CFG_FLASH0_SIZE
-#define CFG_MONITOR_BASE	TEXT_BASE
-#define CFG_MONITOR_LEN		(192 * 1024)	/* Reserve 196 kB for Monitor	*/
-#define CFG_MALLOC_LEN		(128 * 1024)	/* Reserve 128 kB for malloc()	*/
-
-#if CFG_MONITOR_BASE < CFG_FLASH0_BASE
-#define CFG_RAMSTART
+#define CONFIG_SYS_SDRAM_BASE		0x00000000
+#define CONFIG_SYS_FLASH0_BASE		0xFFF80000
+#define CONFIG_SYS_FLASH0_SIZE		0x00080000
+#define CONFIG_SYS_FLASH1_BASE		0x20000000
+#define CONFIG_SYS_FLASH1_SIZE		0x02000000
+#define CONFIG_SYS_FLASH_BASE		CONFIG_SYS_FLASH0_BASE
+#define CONFIG_SYS_FLASH_SIZE		CONFIG_SYS_FLASH0_SIZE
+#define CONFIG_SYS_MONITOR_BASE	TEXT_BASE
+#define CONFIG_SYS_MONITOR_LEN		(192 * 1024)	/* Reserve 196 kB for Monitor	*/
+#define CONFIG_SYS_MALLOC_LEN		(128 * 1024)	/* Reserve 128 kB for malloc()	*/
+
+#if CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH0_BASE
+#define CONFIG_SYS_RAMSTART
 #endif
 
 /*
@@ -178,32 +179,32 @@
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
+#define CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
 /*-----------------------------------------------------------------------
  * FLASH organization
  */
-#define CFG_MAX_FLASH_BANKS	5	/* max number of memory banks		*/
-#define CFG_MAX_FLASH_SECT	128	/* max number of sectors on one chip	*/
+#define CONFIG_SYS_MAX_FLASH_BANKS	5	/* max number of memory banks		*/
+#define CONFIG_SYS_MAX_FLASH_SECT	128	/* max number of sectors on one chip	*/
 
-#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
-#define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
+#define CONFIG_SYS_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
+#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
 
-#ifdef CFG_ENV_IS_IN_FLASH
-#define CFG_ENV_OFFSET		0x00060000 /* Offset of Environment Sector      */
-#define	CFG_ENV_SIZE		0x00010000 /* Total Size of Environment Sector	*/
-#define CFG_ENV_SECT_SIZE	0x00010000 /* see README - env sector total size */
+#ifdef CONFIG_ENV_IS_IN_FLASH
+#define CONFIG_ENV_OFFSET		0x00060000 /* Offset of Environment Sector      */
+#define	CONFIG_ENV_SIZE		0x00010000 /* Total Size of Environment Sector	*/
+#define CONFIG_ENV_SECT_SIZE	0x00010000 /* see README - env sector total size */
 #endif
 
 /* On Chip Memory location/size */
-#define CFG_OCM_DATA_ADDR	0xF8000000
-#define CFG_OCM_DATA_SIZE	0x1000
+#define CONFIG_SYS_OCM_DATA_ADDR	0xF8000000
+#define CONFIG_SYS_OCM_DATA_SIZE	0x1000
 
 /* Global info and initial stack */
-#define CFG_INIT_RAM_ADDR	CFG_OCM_DATA_ADDR /* inside of on-chip SRAM	*/
-#define CFG_INIT_RAM_END	CFG_OCM_DATA_SIZE /* End of used area in RAM	*/
-#define CFG_GBL_DATA_SIZE	128 /* size in bytes reserved for initial data */
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_OCM_DATA_ADDR /* inside of on-chip SRAM	*/
+#define CONFIG_SYS_INIT_RAM_END	CONFIG_SYS_OCM_DATA_SIZE /* End of used area in RAM	*/
+#define CONFIG_SYS_GBL_DATA_SIZE	128 /* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
 /*
  * Internal Definitions
diff --git a/include/configs/FADS823.h b/include/configs/FADS823.h
index 6f3e6a75b..cb759602b 100644
--- a/include/configs/FADS823.h
+++ b/include/configs/FADS823.h
@@ -18,14 +18,14 @@
  * 00000000 -> nnnnnnnn : sdram/dram setup by U-Boot
 */
 
-#define CFG_PCMCIA_IO_ADDR	0xff020000
-#define CFG_PCMCIA_IO_SIZE	0x10000
-#define CFG_PCMCIA_MEM_ADDR	0xe0000000
-#define CFG_PCMCIA_MEM_SIZE	0x10000
-#define CFG_IMMR		0xFF000000
-#define	CFG_SDRAM_SIZE		(4<<20) /* standard FADS has 4M */
-#define	CFG_SDRAM_BASE		0x00000000
-#define CFG_FLASH_BASE		0x02800000
+#define CONFIG_SYS_PCMCIA_IO_ADDR	0xff020000
+#define CONFIG_SYS_PCMCIA_IO_SIZE	0x10000
+#define CONFIG_SYS_PCMCIA_MEM_ADDR	0xe0000000
+#define CONFIG_SYS_PCMCIA_MEM_SIZE	0x10000
+#define CONFIG_SYS_IMMR		0xFF000000
+#define	CONFIG_SYS_SDRAM_SIZE		(4<<20) /* standard FADS has 4M */
+#define	CONFIG_SYS_SDRAM_BASE		0x00000000
+#define CONFIG_SYS_FLASH_BASE		0x02800000
 #define BCSR_ADDR		((uint) 0xff010000)
 #define FLASH_BASE0_PRELIM	0x02800000	/* FLASH bank #0	*/
 
@@ -43,8 +43,8 @@
 
 #define CONFIG_VIDEO		1	/* To enable video controller support */
 #define CONFIG_HARD_I2C		1	/* To I2C with hardware support */
-#define CFG_I2C_SPEED		400000	/* I2C speed and slave address */
-#define CFG_I2C_SLAVE		0x7F
+#define CONFIG_SYS_I2C_SPEED		400000	/* I2C speed and slave address */
+#define CONFIG_SYS_I2C_SLAVE		0x7F
 
 /*#define CONFIG_PCMCIA		1	/ * To enable PCMCIA support */
 
@@ -82,7 +82,7 @@
 #else
 #define MPC8XX_FACT	10			/* Multiply by 10 */
 #define MPC8XX_XIN	5000000			/* 5 MHz in */
-#define CFG_PLPRCR_MF	(MPC8XX_FACT-1) << 20	/* From 0 to 4095 */
+#define CONFIG_SYS_PLPRCR_MF	(MPC8XX_FACT-1) << 20	/* From 0 to 4095 */
 #endif
 #define MPC8XX_HZ ((MPC8XX_XIN) * (MPC8XX_FACT))
 
@@ -134,25 +134,25 @@
 /*
  * Miscellaneous configurable options
  */
-#define	CFG_LONGHELP				/* undef to save memory		*/
-#define	CFG_PROMPT		":>"		/* Monitor Command Prompt	*/
+#define	CONFIG_SYS_LONGHELP				/* undef to save memory		*/
+#define	CONFIG_SYS_PROMPT		":>"		/* Monitor Command Prompt	*/
 #if defined(CONFIG_CMD_KGDB)
-#define	CFG_CBSIZE		1024		/* Console I/O Buffer Size	*/
+#define	CONFIG_SYS_CBSIZE		1024		/* Console I/O Buffer Size	*/
 #else
-#define	CFG_CBSIZE		256		/* Console I/O Buffer Size	*/
+#define	CONFIG_SYS_CBSIZE		256		/* Console I/O Buffer Size	*/
 #endif
-#define	CFG_PBSIZE		(CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define	CFG_MAXARGS		16		/* max number of command args	*/
-#define CFG_BARGSIZE		CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+#define	CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define	CONFIG_SYS_MAXARGS		16		/* max number of command args	*/
+#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
 
-#define CFG_MEMTEST_START	0x00004000	/* memtest works on	*/
-#define CFG_MEMTEST_END		0x01000000	/* 0 ... 16 MB in DRAM	*/
+#define CONFIG_SYS_MEMTEST_START	0x00004000	/* memtest works on	*/
+#define CONFIG_SYS_MEMTEST_END		0x01000000	/* 0 ... 16 MB in DRAM	*/
 
-#define CFG_LOAD_ADDR		0x00100000	/* default load address */
+#define CONFIG_SYS_LOAD_ADDR		0x00100000	/* default load address */
 
-#define	CFG_HZ		1000		/* decrementer freq: 1 ms ticks	*/
+#define	CONFIG_SYS_HZ		1000		/* decrementer freq: 1 ms ticks	*/
 
-#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
 
 /*
  * Low Level Configuration Settings
@@ -162,58 +162,58 @@
 /*-----------------------------------------------------------------------
  * Internal Memory Mapped Register
  */
-#define CFG_IMMR_SIZE		((uint)(64 * 1024))
+#define CONFIG_SYS_IMMR_SIZE		((uint)(64 * 1024))
 
 /*-----------------------------------------------------------------------
  * Definitions for initial stack pointer and data area (in DPRAM)
  */
-#define CFG_INIT_RAM_ADDR	CFG_IMMR
-#define	CFG_INIT_RAM_END	0x2F00	/* End of used area in DPRAM	*/
-#define	CFG_GBL_DATA_SIZE	64	/* size in bytes reserved for initial data */
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define	CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_IMMR
+#define	CONFIG_SYS_INIT_RAM_END	0x2F00	/* End of used area in DPRAM	*/
+#define	CONFIG_SYS_GBL_DATA_SIZE	64	/* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define	CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
 /*-----------------------------------------------------------------------
  * Start addresses for the final memory configuration
  * (Set up by the startup code)
- * Please note that CFG_SDRAM_BASE _must_ start at 0
+ * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
  * Also NOTE that it doesn't mean SDRAM - it means MEMORY.
  */
-#define CFG_FLASH_SIZE		((uint)(8 * 1024 * 1024))	/* max 8Mbyte */
+#define CONFIG_SYS_FLASH_SIZE		((uint)(8 * 1024 * 1024))	/* max 8Mbyte */
 #if 0
-#define	CFG_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor	*/
+#define	CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor	*/
 #else
-#define	CFG_MONITOR_LEN		(512 << 10)	/* Reserve 512 kB for Monitor	*/
+#define	CONFIG_SYS_MONITOR_LEN		(512 << 10)	/* Reserve 512 kB for Monitor	*/
 #endif
-#define CFG_MONITOR_BASE	CFG_FLASH_BASE
-#define	CFG_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/
+#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_FLASH_BASE
+#define	CONFIG_SYS_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/
 
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define	CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux	*/
+#define	CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux	*/
 /*-----------------------------------------------------------------------
  * FLASH organization
  */
-#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
-#define CFG_MAX_FLASH_SECT	8	/* max number of sectors on one chip	*/
+#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
+#define CONFIG_SYS_MAX_FLASH_SECT	8	/* max number of sectors on one chip	*/
 
-#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
-#define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
+#define CONFIG_SYS_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
+#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
 
-#define	CFG_ENV_IS_IN_FLASH	1
-#define CFG_ENV_OFFSET		0x00040000	/* Offset of Environment Sector */
-#define	CFG_ENV_SIZE		0x40000	/* Total Size of Environment Sector	*/
-#define	CFG_USE_PPCENV			/* Environment embedded in sect .ppcenv */
+#define	CONFIG_ENV_IS_IN_FLASH	1
+#define CONFIG_ENV_OFFSET		0x00040000	/* Offset of Environment Sector */
+#define	CONFIG_ENV_SIZE		0x40000	/* Total Size of Environment Sector	*/
+#define	CONFIG_SYS_USE_PPCENV			/* Environment embedded in sect .ppcenv */
 
 /*-----------------------------------------------------------------------
  * Cache Configuration
  */
-#define CFG_CACHELINE_SIZE	16	/* For all MPC8xx CPUs			*/
+#define CONFIG_SYS_CACHELINE_SIZE	16	/* For all MPC8xx CPUs			*/
 #if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT	4	/* log base 2 of the above value	*/
+#define CONFIG_SYS_CACHELINE_SHIFT	4	/* log base 2 of the above value	*/
 #endif
 
 /*-----------------------------------------------------------------------
@@ -223,10 +223,10 @@
  * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze
  */
 #if defined(CONFIG_WATCHDOG)
-#define CFG_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
+#define CONFIG_SYS_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
 			 SYPCR_SWE  | SYPCR_SWRI| SYPCR_SWP)
 #else
-#define CFG_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
+#define CONFIG_SYS_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
 #endif
 
 /*-----------------------------------------------------------------------
@@ -234,21 +234,21 @@
  *-----------------------------------------------------------------------
  * PCMCIA config., multi-function pin tri-state
  */
-#define CFG_SIUMCR	(SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_MLRC01)
+#define CONFIG_SYS_SIUMCR	(SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_MLRC01)
 
 /*-----------------------------------------------------------------------
  * TBSCR - Time Base Status and Control					11-26
  *-----------------------------------------------------------------------
  * Clear Reference Interrupt Status, Timebase freezing enabled
  */
-#define CFG_TBSCR	(TBSCR_REFA | TBSCR_REFB | TBSCR_TBE)
+#define CONFIG_SYS_TBSCR	(TBSCR_REFA | TBSCR_REFB | TBSCR_TBE)
 
 /*-----------------------------------------------------------------------
  * PISCR - Periodic Interrupt Status and Control		11-31
  *-----------------------------------------------------------------------
  * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
  */
-#define CFG_PISCR	(PISCR_PS | PISCR_PITF)
+#define CONFIG_SYS_PISCR	(PISCR_PS | PISCR_PITF)
 
 /*-----------------------------------------------------------------------
  * PLPRCR - PLL, Low-Power, and Reset Control Register	15-30
@@ -256,7 +256,7 @@
  * Reset PLL lock status sticky bit, timer expired status bit and timer  *
  * interrupt status bit - leave PLL multiplication factor unchanged !
  */
-#define CFG_PLPRCR	(PLPRCR_SPLSS | PLPRCR_TEXPS | PLPRCR_TMIST | CFG_PLPRCR_MF)
+#define CONFIG_SYS_PLPRCR	(PLPRCR_SPLSS | PLPRCR_TEXPS | PLPRCR_TMIST | CONFIG_SYS_PLPRCR_MF)
 
 /*-----------------------------------------------------------------------
  * SCCR - System Clock and reset Control Register		15-27
@@ -265,7 +265,7 @@
  * power management and some other internal clocks
  */
 #define SCCR_MASK	SCCR_EBDF11
-#define CFG_SCCR       (SCCR_TBS     | \
+#define CONFIG_SYS_SCCR       (SCCR_TBS     | \
 				SCCR_COM00   | SCCR_DFSYNC00 | SCCR_DFBRG00  | \
 				SCCR_DFNL000 | SCCR_DFNH000  | SCCR_DFLCD000 | \
 				SCCR_DFALCD00)
@@ -275,7 +275,7 @@
  *-----------------------------------------------------------------------
  *
  */
-#define CFG_DER		0
+#define CONFIG_SYS_DER		0
 
 /* Because of the way the 860 starts up and assigns CS0 the
 * entire address space, we have to set the memory controller
@@ -296,20 +296,20 @@
 
 #define FLASH_BASE1_PRELIM	0x00000000	/* FLASH bank #1	*/
 
-#define CFG_REMAP_OR_AM		0x80000000	/* OR addr mask */
-#define CFG_PRELIM_OR_AM	0xFFE00000	/* OR addr mask */
+#define CONFIG_SYS_REMAP_OR_AM		0x80000000	/* OR addr mask */
+#define CONFIG_SYS_PRELIM_OR_AM	0xFFE00000	/* OR addr mask */
 
 /* FLASH timing: ACS = 10, TRLX = 1, CSNT = 1, SCY = 3, EHTR = 0	*/
-#define CFG_OR_TIMING_FLASH	(OR_CSNT_SAM  | OR_ACS_DIV4 | OR_BI | OR_SCY_3_CLK | OR_TRLX)
+#define CONFIG_SYS_OR_TIMING_FLASH	(OR_CSNT_SAM  | OR_ACS_DIV4 | OR_BI | OR_SCY_3_CLK | OR_TRLX)
 
-#define CFG_OR0_REMAP	(CFG_REMAP_OR_AM  | CFG_OR_TIMING_FLASH)
-#define CFG_OR0_PRELIM	(CFG_PRELIM_OR_AM | CFG_OR_TIMING_FLASH)   /* 1 Mbyte until detected and only 1 Mbyte is needed*/
-#define CFG_BR0_PRELIM	((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_V )
+#define CONFIG_SYS_OR0_REMAP	(CONFIG_SYS_REMAP_OR_AM  | CONFIG_SYS_OR_TIMING_FLASH)
+#define CONFIG_SYS_OR0_PRELIM	(CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_FLASH)   /* 1 Mbyte until detected and only 1 Mbyte is needed*/
+#define CONFIG_SYS_BR0_PRELIM	((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_V )
 
 /* BCSRx - Board Control and Status Registers */
-#define CFG_OR1_REMAP	CFG_OR0_REMAP
-#define CFG_OR1_PRELIM	0xffff8110									/* 64Kbyte address space */
-#define CFG_BR1_PRELIM	((BCSR_ADDR) | BR_V )
+#define CONFIG_SYS_OR1_REMAP	CONFIG_SYS_OR0_REMAP
+#define CONFIG_SYS_OR1_PRELIM	0xffff8110									/* 64Kbyte address space */
+#define CONFIG_SYS_BR1_PRELIM	((BCSR_ADDR) | BR_V )
 
 
 /*
@@ -317,30 +317,30 @@
  */
 
 /* periodic timer for refresh */
-#define CFG_MAMR_PTA		97		/* start with divider for 100 MHz	*/
+#define CONFIG_SYS_MAMR_PTA		97		/* start with divider for 100 MHz	*/
 
 /* refresh rate 15.6 us (= 64 ms / 4K = 62.4 / quad bursts) for <= 128 MBit	*/
-#define CFG_MPTPR_2BK_4K	MPTPR_PTP_DIV16		/* setting for 2 banks	*/
-#define CFG_MPTPR_1BK_4K	MPTPR_PTP_DIV32		/* setting for 1 bank	*/
+#define CONFIG_SYS_MPTPR_2BK_4K	MPTPR_PTP_DIV16		/* setting for 2 banks	*/
+#define CONFIG_SYS_MPTPR_1BK_4K	MPTPR_PTP_DIV32		/* setting for 1 bank	*/
 
 /* refresh rate 7.8 us (= 64 ms / 8K = 31.2 / quad bursts) for 256 MBit		*/
-#define CFG_MPTPR_2BK_8K	MPTPR_PTP_DIV8		/* setting for 2 banks	*/
-#define CFG_MPTPR_1BK_8K	MPTPR_PTP_DIV16		/* setting for 1 bank	*/
+#define CONFIG_SYS_MPTPR_2BK_8K	MPTPR_PTP_DIV8		/* setting for 2 banks	*/
+#define CONFIG_SYS_MPTPR_1BK_8K	MPTPR_PTP_DIV16		/* setting for 1 bank	*/
 
 /*
  * MAMR settings for SDRAM
  */
 
 /* 8 column SDRAM */
-#define CFG_MAMR_8COL	((CFG_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
+#define CONFIG_SYS_MAMR_8COL	((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
 			 MAMR_AMA_TYPE_0 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A11 |	\
 			 MAMR_RLFA_1X	 | MAMR_WLFA_1X	   | MAMR_TLFA_4X)
 /* 9 column SDRAM */
-#define CFG_MAMR_9COL	((CFG_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
+#define CONFIG_SYS_MAMR_9COL	((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
 			 MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 |	\
 			 MAMR_RLFA_1X	 | MAMR_WLFA_1X	   | MAMR_TLFA_4X)
 
-#define CFG_MAMR		0x13a01114
+#define CONFIG_SYS_MAMR		0x13a01114
 /*
  * Internal Definitions
  *
@@ -477,6 +477,6 @@
 #define PCMCIA_SLOT_A 1
 #endif
 
-#define CFG_DAUGHTERBOARD
+#define CONFIG_SYS_DAUGHTERBOARD
 
 #endif	/* __CONFIG_H */
diff --git a/include/configs/FADS850SAR.h b/include/configs/FADS850SAR.h
index 356705ba1..84187fbb4 100644
--- a/include/configs/FADS850SAR.h
+++ b/include/configs/FADS850SAR.h
@@ -80,25 +80,25 @@
 /*
  * Miscellaneous configurable options
  */
-#undef	CFG_LONGHELP			/* undef to save memory		*/
-#define	CFG_PROMPT		":>"		/* Monitor Command Prompt	*/
+#undef	CONFIG_SYS_LONGHELP			/* undef to save memory		*/
+#define	CONFIG_SYS_PROMPT		":>"		/* Monitor Command Prompt	*/
 #if defined(CONFIG_CMD_KGDB)
-#define	CFG_CBSIZE	1024		/* Console I/O Buffer Size	*/
+#define	CONFIG_SYS_CBSIZE	1024		/* Console I/O Buffer Size	*/
 #else
-#define	CFG_CBSIZE	256		/* Console I/O Buffer Size	*/
+#define	CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size	*/
 #endif
-#define	CFG_PBSIZE	(CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define	CFG_MAXARGS	16		/* max number of command args	*/
-#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+#define	CONFIG_SYS_PBSIZE	(CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define	CONFIG_SYS_MAXARGS	16		/* max number of command args	*/
+#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
 
-#define CFG_MEMTEST_START	0x00004000	/* memtest works on	*/
-#define CFG_MEMTEST_END		0x00800000	/* 0 ... 8 MB in DRAM	*/
+#define CONFIG_SYS_MEMTEST_START	0x00004000	/* memtest works on	*/
+#define CONFIG_SYS_MEMTEST_END		0x00800000	/* 0 ... 8 MB in DRAM	*/
 
-#define CFG_LOAD_ADDR		0x00100000	/* default load address */
+#define CONFIG_SYS_LOAD_ADDR		0x00100000	/* default load address */
 
-#define	CFG_HZ		1000		/* decrementer freq: 1 ms ticks	*/
+#define	CONFIG_SYS_HZ		1000		/* decrementer freq: 1 ms ticks	*/
 
-#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
 
 /*
  * Low Level Configuration Settings
@@ -108,62 +108,62 @@
 /*-----------------------------------------------------------------------
  * Internal Memory Mapped Register
  */
-#define CFG_IMMR			0xFF000000
-#define CFG_IMMR_SIZE		((uint)(64 * 1024))
+#define CONFIG_SYS_IMMR			0xFF000000
+#define CONFIG_SYS_IMMR_SIZE		((uint)(64 * 1024))
 
 /*-----------------------------------------------------------------------
  * Definitions for initial stack pointer and data area (in DPRAM)
  */
-#define CFG_INIT_RAM_ADDR	CFG_IMMR
-#define	CFG_INIT_RAM_END	0x2F00	/* End of used area in DPRAM	*/
-#define	CFG_GBL_DATA_SIZE	64  /* size in bytes reserved for initial data */
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define	CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_IMMR
+#define	CONFIG_SYS_INIT_RAM_END	0x2F00	/* End of used area in DPRAM	*/
+#define	CONFIG_SYS_GBL_DATA_SIZE	64  /* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define	CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
 /*-----------------------------------------------------------------------
  * Start addresses for the final memory configuration
  * (Set up by the startup code)
- * Please note that CFG_SDRAM_BASE _must_ start at 0
+ * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
  * Also NOTE that it doesn't mean SDRAM - it means MEMORY.
  */
-#define	CFG_SDRAM_BASE		0x00000000
-#define	CFG_SDRAM_SIZE		(4<<20) /* standard FADS has 4M */
-#define CFG_FLASH_BASE		0x02800000
-#define CFG_FLASH_SIZE		((uint)(8 * 1024 * 1024))	/* max 8Mbyte */
+#define	CONFIG_SYS_SDRAM_BASE		0x00000000
+#define	CONFIG_SYS_SDRAM_SIZE		(4<<20) /* standard FADS has 4M */
+#define CONFIG_SYS_FLASH_BASE		0x02800000
+#define CONFIG_SYS_FLASH_SIZE		((uint)(8 * 1024 * 1024))	/* max 8Mbyte */
 #if 0
-#define	CFG_MONITOR_LEN		(256 << 10)	/* Reserve 128 kB for Monitor	*/
+#define	CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 128 kB for Monitor	*/
 #else
-#define	CFG_MONITOR_LEN		(512 << 10)	/* Reserve 512 kB for Monitor	*/
+#define	CONFIG_SYS_MONITOR_LEN		(512 << 10)	/* Reserve 512 kB for Monitor	*/
 #endif
-#define CFG_MONITOR_BASE	CFG_FLASH_BASE
-#define	CFG_MALLOC_LEN		(256 << 10)	/* Reserve 128 kB for malloc()	*/
+#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_FLASH_BASE
+#define	CONFIG_SYS_MALLOC_LEN		(256 << 10)	/* Reserve 128 kB for malloc()	*/
 
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define	CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux	*/
+#define	CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux	*/
 /*-----------------------------------------------------------------------
  * FLASH organization
  */
-#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
-#define CFG_MAX_FLASH_SECT	8	/* max number of sectors on one chip	*/
+#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
+#define CONFIG_SYS_MAX_FLASH_SECT	8	/* max number of sectors on one chip	*/
 
-#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
-#define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
+#define CONFIG_SYS_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
+#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
 
-#define	CFG_ENV_IS_IN_FLASH	1
-#define CFG_ENV_OFFSET		0x00040000	/* Offset of Environment Sector */
-#define	CFG_ENV_SIZE		0x40000	/* Total Size of Environment Sector	*/
-#define	CFG_USE_PPCENV			/* Environment embedded in sect .ppcenv */
+#define	CONFIG_ENV_IS_IN_FLASH	1
+#define CONFIG_ENV_OFFSET		0x00040000	/* Offset of Environment Sector */
+#define	CONFIG_ENV_SIZE		0x40000	/* Total Size of Environment Sector	*/
+#define	CONFIG_SYS_USE_PPCENV			/* Environment embedded in sect .ppcenv */
 
 /*-----------------------------------------------------------------------
  * Cache Configuration
  */
-#define CFG_CACHELINE_SIZE	16	/* For all MPC8xx CPUs			*/
+#define CONFIG_SYS_CACHELINE_SIZE	16	/* For all MPC8xx CPUs			*/
 #if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT	4	/* log base 2 of the above value	*/
+#define CONFIG_SYS_CACHELINE_SHIFT	4	/* log base 2 of the above value	*/
 #endif
 
 /*-----------------------------------------------------------------------
@@ -173,10 +173,10 @@
  * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze
  */
 #if defined(CONFIG_WATCHDOG)
-#define CFG_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
+#define CONFIG_SYS_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
 			 SYPCR_SWE  | SYPCR_SWRI| SYPCR_SWP)
 #else
-#define CFG_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
+#define CONFIG_SYS_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
 #endif
 
 /*-----------------------------------------------------------------------
@@ -184,21 +184,21 @@
  *-----------------------------------------------------------------------
  * PCMCIA config., multi-function pin tri-state
  */
-#define CFG_SIUMCR	(SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_MLRC01)
+#define CONFIG_SYS_SIUMCR	(SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_MLRC01)
 
 /*-----------------------------------------------------------------------
  * TBSCR - Time Base Status and Control					11-26
  *-----------------------------------------------------------------------
  * Clear Reference Interrupt Status, Timebase freezing enabled
  */
-#define CFG_TBSCR	(TBSCR_REFA | TBSCR_REFB | TBSCR_TBE)
+#define CONFIG_SYS_TBSCR	(TBSCR_REFA | TBSCR_REFB | TBSCR_TBE)
 
 /*-----------------------------------------------------------------------
  * PISCR - Periodic Interrupt Status and Control		11-31
  *-----------------------------------------------------------------------
  * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
  */
-#define CFG_PISCR	(PISCR_PS | PISCR_PITF)
+#define CONFIG_SYS_PISCR	(PISCR_PS | PISCR_PITF)
 
 /*-----------------------------------------------------------------------
  * PLPRCR - PLL, Low-Power, and Reset Control Register	15-30
@@ -206,7 +206,7 @@
  * Reset PLL lock status sticky bit, timer expired status bit and timer  *
  * interrupt status bit - leave PLL multiplication factor unchanged !
  */
-#define CFG_PLPRCR	(((MPC8XX_FACT-1) << 20) | \
+#define CONFIG_SYS_PLPRCR	(((MPC8XX_FACT-1) << 20) | \
 				PLPRCR_SPLSS | PLPRCR_TEXPS | PLPRCR_TMIST)
 
 /*-----------------------------------------------------------------------
@@ -216,7 +216,7 @@
  * power management and some other internal clocks
  */
 #define SCCR_MASK	SCCR_EBDF11
-#define CFG_SCCR       (SCCR_TBS     | \
+#define CONFIG_SYS_SCCR       (SCCR_TBS     | \
 				SCCR_COM00   | SCCR_DFSYNC00 | SCCR_DFBRG00  | \
 				SCCR_DFNL000 | SCCR_DFNH000  | SCCR_DFLCD000 | \
 				SCCR_DFALCD00)
@@ -226,7 +226,7 @@
  *-----------------------------------------------------------------------
  *
  */
-#define CFG_DER		0
+#define CONFIG_SYS_DER		0
 
 /* Because of the way the 860 starts up and assigns CS0 the
 * entire address space, we have to set the memory controller
@@ -250,20 +250,20 @@
 #define FLASH_BASE0_PRELIM	0x02800000	/* FLASH bank #0	*/
 #define FLASH_BASE1_PRELIM	0x00000000	/* FLASH bank #1	*/
 
-#define CFG_REMAP_OR_AM		0x80000000	/* OR addr mask */
-#define CFG_PRELIM_OR_AM	0xFFE00000	/* OR addr mask */
+#define CONFIG_SYS_REMAP_OR_AM		0x80000000	/* OR addr mask */
+#define CONFIG_SYS_PRELIM_OR_AM	0xFFE00000	/* OR addr mask */
 
 /* FLASH timing: ACS = 10, TRLX = 1, CSNT = 1, SCY = 3, EHTR = 0	*/
-#define CFG_OR_TIMING_FLASH	(OR_CSNT_SAM  | OR_ACS_DIV4 | OR_BI | OR_SCY_3_CLK | OR_TRLX)
+#define CONFIG_SYS_OR_TIMING_FLASH	(OR_CSNT_SAM  | OR_ACS_DIV4 | OR_BI | OR_SCY_3_CLK | OR_TRLX)
 
-#define CFG_OR0_REMAP	(CFG_REMAP_OR_AM  | CFG_OR_TIMING_FLASH)
-#define CFG_OR0_PRELIM	(CFG_PRELIM_OR_AM | CFG_OR_TIMING_FLASH)   /* 1 Mbyte until detected and only 1 Mbyte is needed*/
-#define CFG_BR0_PRELIM	((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_V )
+#define CONFIG_SYS_OR0_REMAP	(CONFIG_SYS_REMAP_OR_AM  | CONFIG_SYS_OR_TIMING_FLASH)
+#define CONFIG_SYS_OR0_PRELIM	(CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_FLASH)   /* 1 Mbyte until detected and only 1 Mbyte is needed*/
+#define CONFIG_SYS_BR0_PRELIM	((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_V )
 
 /* BCSRx - Board Control and Status Registers */
-#define CFG_OR1_REMAP	CFG_OR0_REMAP
-#define CFG_OR1_PRELIM	0xffff8110									/* 64Kbyte address space */
-#define CFG_BR1_PRELIM	((BCSR_ADDR) | BR_V )
+#define CONFIG_SYS_OR1_REMAP	CONFIG_SYS_OR0_REMAP
+#define CONFIG_SYS_OR1_PRELIM	0xffff8110									/* 64Kbyte address space */
+#define CONFIG_SYS_BR1_PRELIM	((BCSR_ADDR) | BR_V )
 
 
 /*
@@ -271,30 +271,30 @@
  */
 
 /* periodic timer for refresh */
-#define CFG_MAMR_PTA		97		/* start with divider for 100 MHz	*/
+#define CONFIG_SYS_MAMR_PTA		97		/* start with divider for 100 MHz	*/
 
 /* refresh rate 15.6 us (= 64 ms / 4K = 62.4 / quad bursts) for <= 128 MBit	*/
-#define CFG_MPTPR_2BK_4K	MPTPR_PTP_DIV16		/* setting for 2 banks	*/
-#define CFG_MPTPR_1BK_4K	MPTPR_PTP_DIV32		/* setting for 1 bank	*/
+#define CONFIG_SYS_MPTPR_2BK_4K	MPTPR_PTP_DIV16		/* setting for 2 banks	*/
+#define CONFIG_SYS_MPTPR_1BK_4K	MPTPR_PTP_DIV32		/* setting for 1 bank	*/
 
 /* refresh rate 7.8 us (= 64 ms / 8K = 31.2 / quad bursts) for 256 MBit		*/
-#define CFG_MPTPR_2BK_8K	MPTPR_PTP_DIV8		/* setting for 2 banks	*/
-#define CFG_MPTPR_1BK_8K	MPTPR_PTP_DIV16		/* setting for 1 bank	*/
+#define CONFIG_SYS_MPTPR_2BK_8K	MPTPR_PTP_DIV8		/* setting for 2 banks	*/
+#define CONFIG_SYS_MPTPR_1BK_8K	MPTPR_PTP_DIV16		/* setting for 1 bank	*/
 
 /*
  * MAMR settings for SDRAM
  */
 
 /* 8 column SDRAM */
-#define CFG_MAMR_8COL	((CFG_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
+#define CONFIG_SYS_MAMR_8COL	((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
 			 MAMR_AMA_TYPE_0 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A11 |	\
 			 MAMR_RLFA_1X	 | MAMR_WLFA_1X	   | MAMR_TLFA_4X)
 /* 9 column SDRAM */
-#define CFG_MAMR_9COL	((CFG_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
+#define CONFIG_SYS_MAMR_9COL	((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
 			 MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 |	\
 			 MAMR_RLFA_1X	 | MAMR_WLFA_1X	   | MAMR_TLFA_4X)
 
-#define CFG_MAMR		0x13a01114
+#define CONFIG_SYS_MAMR		0x13a01114
 /*
  * Internal Definitions
  *
@@ -421,6 +421,6 @@
 #define PCMCIA_SLOT_A 1
 #endif
 
-#define CFG_DAUGHTERBOARD
+#define CONFIG_SYS_DAUGHTERBOARD
 
 #endif	/* __CONFIG_H */
diff --git a/include/configs/FADS860T.h b/include/configs/FADS860T.h
index 38295c455..dcb0c3944 100644
--- a/include/configs/FADS860T.h
+++ b/include/configs/FADS860T.h
@@ -27,12 +27,12 @@
 #define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
 
 #if 0 /* old FADS */
-# define CFG_8XX_FACT		12	/* 4 MHz oscillator on EXTCLK */
+# define CONFIG_SYS_8XX_FACT		12	/* 4 MHz oscillator on EXTCLK */
 #else /* new FADS */
-# define CFG_8XX_FACT		10	/* 5 MHz oscillator on EXTCLK */
+# define CONFIG_SYS_8XX_FACT		10	/* 5 MHz oscillator on EXTCLK */
 #endif
 
-#define CFG_PLPRCR  (((CFG_8XX_FACT-1) << PLPRCR_MF_SHIFT) |	\
+#define CONFIG_SYS_PLPRCR  (((CONFIG_SYS_8XX_FACT-1) << PLPRCR_MF_SHIFT) |	\
 		PLPRCR_SPLSS | PLPRCR_TEXPS | PLPRCR_TMIST)
 
 #define CONFIG_DRAM_50MHZ		1
@@ -45,12 +45,12 @@
  * These values fit our FADS860T ...
  * The "default" behaviour with 1Mbyte initial doesn't work for us!
  */
-#undef CFG_OR0_PRELIM
-#undef CFG_BR0_PRELIM
-#define CFG_OR0_PRELIM	0x0FFC00D34 /* Real values for the board */
-#define CFG_BR0_PRELIM	0x02800001  /* Real values for the board */
+#undef CONFIG_SYS_OR0_PRELIM
+#undef CONFIG_SYS_BR0_PRELIM
+#define CONFIG_SYS_OR0_PRELIM	0x0FFC00D34 /* Real values for the board */
+#define CONFIG_SYS_BR0_PRELIM	0x02800001  /* Real values for the board */
 #endif
 
-#define CFG_DAUGHTERBOARD /* FADS has processor-specific daughterboard */
+#define CONFIG_SYS_DAUGHTERBOARD /* FADS has processor-specific daughterboard */
 
 #endif	/* __CONFIG_H */
diff --git a/include/configs/FLAGADM.h b/include/configs/FLAGADM.h
index 431844c7f..1ef806796 100644
--- a/include/configs/FLAGADM.h
+++ b/include/configs/FLAGADM.h
@@ -57,7 +57,7 @@
 #endif /* 0|1*/
 
 #define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
-#undef	CFG_LOADS_BAUD_CHANGE		/* don't allow baudrate change	*/
+#undef	CONFIG_SYS_LOADS_BAUD_CHANGE		/* don't allow baudrate change	*/
 
 /*#define	CONFIG_WATCHDOG*/	/* watchdog enabled		*/
 #undef	CONFIG_WATCHDOG			/* watchdog disabled		*/
@@ -92,25 +92,25 @@
 /*
  * Miscellaneous configurable options
  */
-#define CFG_LONGHELP			/* undef to save memory		*/
-#define CFG_PROMPT	"EEG> "		/* Monitor Command Prompt	*/
+#define CONFIG_SYS_LONGHELP			/* undef to save memory		*/
+#define CONFIG_SYS_PROMPT	"EEG> "		/* Monitor Command Prompt	*/
 #if defined(CONFIG_CMD_KGDB)
-#define CFG_CBSIZE	1024		/* Console I/O Buffer Size	*/
+#define CONFIG_SYS_CBSIZE	1024		/* Console I/O Buffer Size	*/
 #else
-#define CFG_CBSIZE	256		/* Console I/O Buffer Size	*/
+#define CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size	*/
 #endif
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define CFG_MAXARGS	16		/* max number of command args	*/
-#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS	16		/* max number of command args	*/
+#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
 
-#define CFG_MEMTEST_START	0x0100000	/* memtest works on	*/
-#define CFG_MEMTEST_END		0x0f00000	/* 1 ... 15 MB in DRAM	*/
+#define CONFIG_SYS_MEMTEST_START	0x0100000	/* memtest works on	*/
+#define CONFIG_SYS_MEMTEST_END		0x0f00000	/* 1 ... 15 MB in DRAM	*/
 
-#define CFG_LOAD_ADDR		0x40040000	/* default load address */
+#define CONFIG_SYS_LOAD_ADDR		0x40040000	/* default load address */
 
-#define CFG_HZ		1000		/* decrementer freq: 1 ms ticks */
+#define CONFIG_SYS_HZ		1000		/* decrementer freq: 1 ms ticks */
 
-#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
 
 /*
  * Low Level Configuration Settings
@@ -120,58 +120,58 @@
 /*-----------------------------------------------------------------------
  * Internal Memory Mapped Register
  */
-#define CFG_IMMR		0xFF000000
+#define CONFIG_SYS_IMMR		0xFF000000
 
 /*-----------------------------------------------------------------------
  * Definitions for initial stack pointer and data area (in DPRAM)
  */
-#define CFG_INIT_RAM_ADDR	CFG_IMMR
-#define CFG_INIT_RAM_END	0x2F00	/* End of used area in DPRAM	*/
-#define CFG_GBL_DATA_SIZE	64  /* size in bytes reserved for initial data */
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_IMMR
+#define CONFIG_SYS_INIT_RAM_END	0x2F00	/* End of used area in DPRAM	*/
+#define CONFIG_SYS_GBL_DATA_SIZE	64  /* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
 /*-----------------------------------------------------------------------
  * Start addresses for the final memory configuration
  * (Set up by the startup code)
- * Please note that CFG_SDRAM_BASE _must_ start at 0
+ * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
  */
-#define CFG_SDRAM_BASE		0x00000000
-#define CFG_FLASH_BASE		0x40000000
-#define CFG_MONITOR_LEN		(128 << 10)	/* Reserve 128 kB for Monitor	*/
-#define CFG_MONITOR_BASE	CFG_FLASH_BASE
-#define CFG_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/
+#define CONFIG_SYS_SDRAM_BASE		0x00000000
+#define CONFIG_SYS_FLASH_BASE		0x40000000
+#define CONFIG_SYS_MONITOR_LEN		(128 << 10)	/* Reserve 128 kB for Monitor	*/
+#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_FLASH_BASE
+#define CONFIG_SYS_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/
 
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
+#define CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
 
 /*-----------------------------------------------------------------------
  * FLASH organization
  */
-#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
-#define CFG_MAX_FLASH_SECT	71	/* max number of sectors on one chip	*/
+#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
+#define CONFIG_SYS_MAX_FLASH_SECT	71	/* max number of sectors on one chip	*/
 
-#define CFG_FLASH_ERASE_TOUT	8000	/* Timeout for Flash Erase (in ms)	*/
-#define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
+#define CONFIG_SYS_FLASH_ERASE_TOUT	8000	/* Timeout for Flash Erase (in ms)	*/
+#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
 
-#define CFG_ENV_IS_IN_FLASH	1
+#define CONFIG_ENV_IS_IN_FLASH	1
 /* This is a litlebit wasteful, but one sector is 128kb and we have to
  * assigne a whole sector for the environment, so that we can safely
  * erase and write it without disturbing the boot sector
  */
-#define CFG_ENV_OFFSET		0x20000 /*   Offset   of Environment Sector	*/
-#define CFG_ENV_SIZE		0x20000 /* Total Size of Environment Sector	*/
+#define CONFIG_ENV_OFFSET		0x20000 /*   Offset   of Environment Sector	*/
+#define CONFIG_ENV_SIZE		0x20000 /* Total Size of Environment Sector	*/
 
 /*-----------------------------------------------------------------------
  * Cache Configuration
  */
-#define CFG_CACHELINE_SIZE	16	/* For all MPC8xx CPUs			*/
+#define CONFIG_SYS_CACHELINE_SIZE	16	/* For all MPC8xx CPUs			*/
 #if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT	4	/* log base 2 of the above value	*/
+#define CONFIG_SYS_CACHELINE_SHIFT	4	/* log base 2 of the above value	*/
 #endif
 
 /*-----------------------------------------------------------------------
@@ -181,9 +181,9 @@
  * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze
  */
 #ifdef CONFIG_WATCHDOG
-#define CFG_SYPCR (SYPCR_SWTC | SYPCR_SWF | SYPCR_SWE | SYPCR_SWRI | SYPCR_SWP)
+#define CONFIG_SYS_SYPCR (SYPCR_SWTC | SYPCR_SWF | SYPCR_SWE | SYPCR_SWRI | SYPCR_SWP)
 #else
-#define CFG_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF)
+#define CONFIG_SYS_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF)
 #endif
 
 /*-----------------------------------------------------------------------
@@ -191,29 +191,29 @@
  *-----------------------------------------------------------------------
  * PCMCIA config., multi-function pin tri-state
  */
-#define CFG_PRE_SIUMCR (SIUMCR_DBGC11 | SIUMCR_MPRE | \
+#define CONFIG_SYS_PRE_SIUMCR (SIUMCR_DBGC11 | SIUMCR_MPRE | \
 							SIUMCR_MLRC01 | SIUMCR_GB5E)
-#define CFG_SIUMCR (CFG_PRE_SIUMCR | SIUMCR_DLK)
+#define CONFIG_SYS_SIUMCR (CONFIG_SYS_PRE_SIUMCR | SIUMCR_DLK)
 
 /*-----------------------------------------------------------------------
  * TBSCR - Time Base Status and Control				11-26
  *-----------------------------------------------------------------------
  * Clear Reference Interrupt Status, Timebase freezing enabled
  */
-#define CFG_TBSCR	(TBSCR_REFA | TBSCR_REFB | TBSCR_TBF)
+#define CONFIG_SYS_TBSCR	(TBSCR_REFA | TBSCR_REFB | TBSCR_TBF)
 
 /*-----------------------------------------------------------------------
  * RTCSC - Real-Time Clock Status and Control Register		11-27
  *-----------------------------------------------------------------------
  */
-#define CFG_RTCSC	(RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE)
+#define CONFIG_SYS_RTCSC	(RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE)
 
 /*-----------------------------------------------------------------------
  * PISCR - Periodic Interrupt Status and Control		11-31
  *-----------------------------------------------------------------------
  * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
  */
-#define CFG_PISCR	(PISCR_PS | PISCR_PITF)
+#define CONFIG_SYS_PISCR	(PISCR_PS | PISCR_PITF)
 
 /*-----------------------------------------------------------------------
  * PLPRCR - PLL, Low-Power, and Reset Control Register		15-30
@@ -222,7 +222,7 @@
  * interrupt status bit miltiplier of 0x00b i.e. operation clock is
  * 4MHz * (0x00b+1) = 4MHz * 12 =  48MHz
  */
-#define CFG_PLPRCR	(0x00b00000 | PLPRCR_SPLSS | PLPRCR_TEXPS | PLPRCR_TMIST)
+#define CONFIG_SYS_PLPRCR	(0x00b00000 | PLPRCR_SPLSS | PLPRCR_TEXPS | PLPRCR_TMIST)
 
 /*-----------------------------------------------------------------------
  * SCCR - System Clock and reset Control Register		15-27
@@ -231,11 +231,11 @@
  * power management and some other internal clocks
  */
 #define SCCR_MASK	SCCR_EBDF11
-#define CFG_SCCR	( SCCR_COM00   | SCCR_DFSYNC00 | SCCR_DFBRG00  | \
+#define CONFIG_SYS_SCCR	( SCCR_COM00   | SCCR_DFSYNC00 | SCCR_DFBRG00  | \
 			 SCCR_DFNL000 | SCCR_DFNH000  | SCCR_DFLCD000 | \
 			 SCCR_DFALCD00)
 
-#define CFG_DER 0
+#define CONFIG_SYS_DER 0
 
 /*
  * In the Flaga DM we have:
@@ -250,7 +250,7 @@
  * untouched.
 */
 
-#define CFG_FLASH_PROTECTION 0
+#define CONFIG_SYS_FLASH_PROTECTION 0
 
 #define FLASH_BASE0		0x40000000	/* FLASH bank #0	*/
 
@@ -258,15 +258,15 @@
  * restrict access enough to keep SRAM working (if any)
  * but not too much to meddle with FLASH accesses
  */
-#define CFG_OR_AM		0xff000000	/* OR addr mask */
-#define CFG_OR_ATM		0x00006000
+#define CONFIG_SYS_OR_AM		0xff000000	/* OR addr mask */
+#define CONFIG_SYS_OR_ATM		0x00006000
 
 /* FLASH timing: ACS = 10, TRLX = 1, CSNT = 1, SCY = 3, EHTR = 1	*/
-#define CFG_OR_TIMING_FLASH	(OR_CSNT_SAM  | OR_ACS_DIV4 | OR_BI | \
+#define CONFIG_SYS_OR_TIMING_FLASH	(OR_CSNT_SAM  | OR_ACS_DIV4 | OR_BI | \
 				 OR_SCY_3_CLK | OR_TRLX | OR_EHTR )
 
-#define CFG_OR0_PRELIM	(CFG_OR_AM | CFG_OR_ATM | CFG_OR_TIMING_FLASH)
-#define CFG_BR0_PRELIM	((FLASH_BASE0 & BR_BA_MSK) | BR_PS_16 | BR_V )
+#define CONFIG_SYS_OR0_PRELIM	(CONFIG_SYS_OR_AM | CONFIG_SYS_OR_ATM | CONFIG_SYS_OR_TIMING_FLASH)
+#define CONFIG_SYS_BR0_PRELIM	((FLASH_BASE0 & BR_BA_MSK) | BR_PS_16 | BR_V )
 
 /*
  * BR2 and OR2 (SDRAM)
@@ -276,18 +276,18 @@
 #define SDRAM_MAX_SIZE		0x04000000	/* max 64 MB per bank	*/
 
 /* SDRAM timing: Multiplexed addresses, GPL5 output to GPL5_A (don't care)	*/
-#define CFG_OR_TIMING_SDRAM	( 0x00000800 )
+#define CONFIG_SYS_OR_TIMING_SDRAM	( 0x00000800 )
 
-#define CFG_OR2_PRELIM	(CFG_OR_AM | CFG_OR_TIMING_SDRAM)
-#define CFG_BR2_PRELIM	((SDRAM_BASE2 & BR_BA_MSK) | BR_MS_UPMA | BR_V )
+#define CONFIG_SYS_OR2_PRELIM	(CONFIG_SYS_OR_AM | CONFIG_SYS_OR_TIMING_SDRAM)
+#define CONFIG_SYS_BR2_PRELIM	((SDRAM_BASE2 & BR_BA_MSK) | BR_MS_UPMA | BR_V )
 
-#define CFG_BR2			CFG_BR2_PRELIM
-#define CFG_OR2			CFG_OR2_PRELIM
+#define CONFIG_SYS_BR2			CONFIG_SYS_BR2_PRELIM
+#define CONFIG_SYS_OR2			CONFIG_SYS_OR2_PRELIM
 
 /*
  * MAMR settings for SDRAM
  */
-#define CFG_MAMR_48_SDR (CFG_MAMR_PTA |	 MAMR_WLFA_1X | MAMR_RLFA_1X  \
+#define CONFIG_SYS_MAMR_48_SDR (CONFIG_SYS_MAMR_PTA |	 MAMR_WLFA_1X | MAMR_RLFA_1X  \
 					| MAMR_G0CLA_A11)
 
 /*
@@ -295,7 +295,7 @@
  */
 
 /* periodic timer for refresh */
-#define CFG_MAMR_PTA	0x0F000000
+#define CONFIG_SYS_MAMR_PTA	0x0F000000
 
 /*
    * BR4 and OR4 (DSP1)
@@ -306,8 +306,8 @@
 */
 #define DSP_BASE 0x80000000
 
-#define CFG_OR4 ( OR_AM_MSK | OR_CSNT_SAM | OR_BI | OR_G5LS)
-#define CFG_BR4 ( (DSP_BASE & BR_BA_MSK) | BR_PS_16 | BR_MS_UPMB | BR_V )
+#define CONFIG_SYS_OR4 ( OR_AM_MSK | OR_CSNT_SAM | OR_BI | OR_G5LS)
+#define CONFIG_SYS_BR4 ( (DSP_BASE & BR_BA_MSK) | BR_PS_16 | BR_MS_UPMB | BR_V )
 
 /*
  * Internal Definitions
diff --git a/include/configs/FPS850L.h b/include/configs/FPS850L.h
index e694a0218..08408e2c3 100644
--- a/include/configs/FPS850L.h
+++ b/include/configs/FPS850L.h
@@ -80,7 +80,7 @@
 #define CONFIG_BOOTCOMMAND	"run flash_self"
 
 #define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
-#undef	CFG_LOADS_BAUD_CHANGE		/* don't allow baudrate change	*/
+#undef	CONFIG_SYS_LOADS_BAUD_CHANGE		/* don't allow baudrate change	*/
 
 #undef	CONFIG_WATCHDOG			/* watchdog disabled		*/
 
@@ -124,32 +124,32 @@
 /*
  * Miscellaneous configurable options
  */
-#define	CFG_LONGHELP			/* undef to save memory		*/
-#define	CFG_PROMPT		"=> "	/* Monitor Command Prompt	*/
+#define	CONFIG_SYS_LONGHELP			/* undef to save memory		*/
+#define	CONFIG_SYS_PROMPT		"=> "	/* Monitor Command Prompt	*/
 
 #define CONFIG_CMDLINE_EDITING	1	/* add command line history	*/
-#define CFG_HUSH_PARSER		1	/* Use the HUSH parser		*/
-#ifdef	CFG_HUSH_PARSER
-#define	CFG_PROMPT_HUSH_PS2	"> "
+#define CONFIG_SYS_HUSH_PARSER		1	/* Use the HUSH parser		*/
+#ifdef	CONFIG_SYS_HUSH_PARSER
+#define	CONFIG_SYS_PROMPT_HUSH_PS2	"> "
 #endif
 
 #if defined(CONFIG_CMD_KGDB)
-#define	CFG_CBSIZE	1024		/* Console I/O Buffer Size	*/
+#define	CONFIG_SYS_CBSIZE	1024		/* Console I/O Buffer Size	*/
 #else
-#define	CFG_CBSIZE	256		/* Console I/O Buffer Size	*/
+#define	CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size	*/
 #endif
-#define	CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define	CFG_MAXARGS	16		/* max number of command args	*/
-#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+#define	CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define	CONFIG_SYS_MAXARGS	16		/* max number of command args	*/
+#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
 
-#define CFG_MEMTEST_START	0x0400000	/* memtest works on	*/
-#define CFG_MEMTEST_END		0x0C00000	/* 4 ... 12 MB in DRAM	*/
+#define CONFIG_SYS_MEMTEST_START	0x0400000	/* memtest works on	*/
+#define CONFIG_SYS_MEMTEST_END		0x0C00000	/* 4 ... 12 MB in DRAM	*/
 
-#define	CFG_LOAD_ADDR		0x100000	/* default load address	*/
+#define	CONFIG_SYS_LOAD_ADDR		0x100000	/* default load address	*/
 
-#define	CFG_HZ		1000		/* decrementer freq: 1 ms ticks	*/
+#define	CONFIG_SYS_HZ		1000		/* decrementer freq: 1 ms ticks	*/
 
-#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
 
 /*
  * Low Level Configuration Settings
@@ -159,57 +159,59 @@
 /*-----------------------------------------------------------------------
  * Internal Memory Mapped Register
  */
-#define CFG_IMMR		0xFFF00000
+#define CONFIG_SYS_IMMR		0xFFF00000
 
 /*-----------------------------------------------------------------------
  * Definitions for initial stack pointer and data area (in DPRAM)
  */
-#define CFG_INIT_RAM_ADDR	CFG_IMMR
-#define	CFG_INIT_RAM_END	0x2F00	/* End of used area in DPRAM	*/
-#define	CFG_GBL_DATA_SIZE	64  /* size in bytes reserved for initial data */
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define	CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_IMMR
+#define	CONFIG_SYS_INIT_RAM_END	0x2F00	/* End of used area in DPRAM	*/
+#define	CONFIG_SYS_GBL_DATA_SIZE	64  /* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define	CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
 /*-----------------------------------------------------------------------
  * Start addresses for the final memory configuration
  * (Set up by the startup code)
- * Please note that CFG_SDRAM_BASE _must_ start at 0
+ * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
  */
-#define	CFG_SDRAM_BASE		0x00000000
-#define CFG_FLASH_BASE		0x40000000
-#define	CFG_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor	*/
-#define CFG_MONITOR_BASE	CFG_FLASH_BASE
-#define	CFG_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/
+#define	CONFIG_SYS_SDRAM_BASE		0x00000000
+#define CONFIG_SYS_FLASH_BASE		0x40000000
+#define	CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor	*/
+#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_FLASH_BASE
+#define	CONFIG_SYS_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/
 
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define	CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux	*/
+#define	CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux	*/
 
 /*-----------------------------------------------------------------------
  * FLASH organization
  */
 
 /* use CFI flash driver */
-#define CFG_FLASH_CFI		1	/* Flash is CFI conformant */
+#define CONFIG_SYS_FLASH_CFI		1	/* Flash is CFI conformant */
 #define CONFIG_FLASH_CFI_DRIVER	1	/* Use the common driver */
-#define CFG_FLASH_BANKS_LIST	{ CFG_FLASH_BASE, CFG_FLASH_BASE+flash_info[0].size }
-#define CFG_FLASH_EMPTY_INFO
-#define CFG_FLASH_USE_BUFFER_WRITE	1
-#define CFG_MAX_FLASH_BANKS	2	/* max number of memory banks */
-#define CFG_MAX_FLASH_SECT	71	/* max number of sectors on one chip */
+#define CONFIG_SYS_FLASH_BANKS_LIST	{ CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE+flash_info[0].size }
+#define CONFIG_SYS_FLASH_EMPTY_INFO
+#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE	1
+#define CONFIG_SYS_MAX_FLASH_BANKS	2	/* max number of memory banks */
+#define CONFIG_SYS_MAX_FLASH_SECT	71	/* max number of sectors on one chip */
 
-#define	CFG_ENV_IS_IN_FLASH	1
-#define	CFG_ENV_OFFSET		0x8000	/*   Offset   of Environment Sector	*/
-#define	CFG_ENV_SIZE		0x4000	/* Total Size of Environment Sector	*/
+#define	CONFIG_ENV_IS_IN_FLASH	1
+#define	CONFIG_ENV_OFFSET		0x8000	/*   Offset   of Environment Sector	*/
+#define	CONFIG_ENV_SIZE		0x4000	/* Total Size of Environment Sector	*/
 
 /* Address and size of Redundant Environment Sector	*/
-#define CFG_ENV_OFFSET_REDUND	(CFG_ENV_OFFSET+CFG_ENV_SIZE)
-#define CFG_ENV_SIZE_REDUND	(CFG_ENV_SIZE)
+#define CONFIG_ENV_OFFSET_REDUND	(CONFIG_ENV_OFFSET+CONFIG_ENV_SIZE)
+#define CONFIG_ENV_SIZE_REDUND	(CONFIG_ENV_SIZE)
 
-#define	CFG_USE_PPCENV			/* Environment embedded in sect .ppcenv */
+#define	CONFIG_SYS_USE_PPCENV			/* Environment embedded in sect .ppcenv */
+
+#define CONFIG_MISC_INIT_R		/* Make sure to remap flashes correctly */
 
 /*-----------------------------------------------------------------------
  * Dynamic MTD partition support
@@ -226,16 +228,16 @@
 /*-----------------------------------------------------------------------
  * Hardware Information Block
  */
-#define CFG_HWINFO_OFFSET	0x0003FFC0	/* offset of HW Info block */
-#define CFG_HWINFO_SIZE		0x00000040	/* size   of HW Info block */
-#define CFG_HWINFO_MAGIC	0x54514D38	/* 'TQM8' */
+#define CONFIG_SYS_HWINFO_OFFSET	0x0003FFC0	/* offset of HW Info block */
+#define CONFIG_SYS_HWINFO_SIZE		0x00000040	/* size   of HW Info block */
+#define CONFIG_SYS_HWINFO_MAGIC	0x54514D38	/* 'TQM8' */
 
 /*-----------------------------------------------------------------------
  * Cache Configuration
  */
-#define CFG_CACHELINE_SIZE	16	/* For all MPC8xx CPUs			*/
+#define CONFIG_SYS_CACHELINE_SIZE	16	/* For all MPC8xx CPUs			*/
 #if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT	4	/* log base 2 of the above value	*/
+#define CONFIG_SYS_CACHELINE_SHIFT	4	/* log base 2 of the above value	*/
 #endif
 
 /*-----------------------------------------------------------------------
@@ -245,10 +247,10 @@
  * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze
  */
 #if defined(CONFIG_WATCHDOG)
-#define CFG_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
+#define CONFIG_SYS_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
 			 SYPCR_SWE  | SYPCR_SWRI| SYPCR_SWP)
 #else
-#define CFG_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
+#define CONFIG_SYS_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
 #endif
 
 /*-----------------------------------------------------------------------
@@ -256,27 +258,27 @@
  *-----------------------------------------------------------------------
  * PCMCIA config., multi-function pin tri-state
  */
-#define CFG_SIUMCR	(SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_MLRC01)
+#define CONFIG_SYS_SIUMCR	(SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_MLRC01)
 
 /*-----------------------------------------------------------------------
  * TBSCR - Time Base Status and Control				11-26
  *-----------------------------------------------------------------------
  * Clear Reference Interrupt Status, Timebase freezing enabled
  */
-#define CFG_TBSCR	(TBSCR_REFA | TBSCR_REFB | TBSCR_TBF)
+#define CONFIG_SYS_TBSCR	(TBSCR_REFA | TBSCR_REFB | TBSCR_TBF)
 
 /*-----------------------------------------------------------------------
  * RTCSC - Real-Time Clock Status and Control Register		11-27
  *-----------------------------------------------------------------------
  */
-#define CFG_RTCSC	(RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE)
+#define CONFIG_SYS_RTCSC	(RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE)
 
 /*-----------------------------------------------------------------------
  * PISCR - Periodic Interrupt Status and Control		11-31
  *-----------------------------------------------------------------------
  * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
  */
-#define CFG_PISCR	(PISCR_PS | PISCR_PITF)
+#define CONFIG_SYS_PISCR	(PISCR_PS | PISCR_PITF)
 
 /*-----------------------------------------------------------------------
  * PLPRCR - PLL, Low-Power, and Reset Control Register		15-30
@@ -284,7 +286,7 @@
  * Reset PLL lock status sticky bit, timer expired status bit and timer
  * interrupt status bit - leave PLL multiplication factor unchanged !
  */
-#define CFG_PLPRCR	(PLPRCR_SPLSS | PLPRCR_TEXPS | PLPRCR_TMIST)
+#define CONFIG_SYS_PLPRCR	(PLPRCR_SPLSS | PLPRCR_TEXPS | PLPRCR_TMIST)
 
 /*-----------------------------------------------------------------------
  * SCCR - System Clock and reset Control Register		15-27
@@ -293,7 +295,7 @@
  * power management and some other internal clocks
  */
 #define SCCR_MASK	SCCR_EBDF11
-#define CFG_SCCR	(SCCR_TBS     | \
+#define CONFIG_SYS_SCCR	(SCCR_TBS     | \
 			 SCCR_COM00   | SCCR_DFSYNC00 | SCCR_DFBRG00  | \
 			 SCCR_DFNL000 | SCCR_DFNH000  | SCCR_DFLCD000 | \
 			 SCCR_DFALCD00)
@@ -303,21 +305,21 @@
  *-----------------------------------------------------------------------
  *
  */
-#define CFG_PCMCIA_MEM_ADDR	(0xE0000000)
-#define CFG_PCMCIA_MEM_SIZE	( 64 << 20 )
-#define CFG_PCMCIA_DMA_ADDR	(0xE4000000)
-#define CFG_PCMCIA_DMA_SIZE	( 64 << 20 )
-#define CFG_PCMCIA_ATTRB_ADDR	(0xE8000000)
-#define CFG_PCMCIA_ATTRB_SIZE	( 64 << 20 )
-#define CFG_PCMCIA_IO_ADDR	(0xEC000000)
-#define CFG_PCMCIA_IO_SIZE	( 64 << 20 )
+#define CONFIG_SYS_PCMCIA_MEM_ADDR	(0xE0000000)
+#define CONFIG_SYS_PCMCIA_MEM_SIZE	( 64 << 20 )
+#define CONFIG_SYS_PCMCIA_DMA_ADDR	(0xE4000000)
+#define CONFIG_SYS_PCMCIA_DMA_SIZE	( 64 << 20 )
+#define CONFIG_SYS_PCMCIA_ATTRB_ADDR	(0xE8000000)
+#define CONFIG_SYS_PCMCIA_ATTRB_SIZE	( 64 << 20 )
+#define CONFIG_SYS_PCMCIA_IO_ADDR	(0xEC000000)
+#define CONFIG_SYS_PCMCIA_IO_SIZE	( 64 << 20 )
 
 /*-----------------------------------------------------------------------
  *
  *-----------------------------------------------------------------------
  *
  */
-#define CFG_DER	0
+#define CONFIG_SYS_DER	0
 
 /*
  * Init Memory Controller:
@@ -332,22 +334,22 @@
  * restrict access enough to keep SRAM working (if any)
  * but not too much to meddle with FLASH accesses
  */
-#define CFG_REMAP_OR_AM		0x80000000	/* OR addr mask */
-#define CFG_PRELIM_OR_AM	0xE0000000	/* OR addr mask */
+#define CONFIG_SYS_REMAP_OR_AM		0x80000000	/* OR addr mask */
+#define CONFIG_SYS_PRELIM_OR_AM	0xE0000000	/* OR addr mask */
 
 /*
  * FLASH timing:
  */
-#define CFG_OR_TIMING_FLASH	(OR_ACS_DIV1  | OR_TRLX | OR_CSNT_SAM | \
+#define CONFIG_SYS_OR_TIMING_FLASH	(OR_ACS_DIV1  | OR_TRLX | OR_CSNT_SAM | \
 				 OR_SCY_3_CLK | OR_EHTR | OR_BI)
 
-#define CFG_OR0_REMAP	(CFG_REMAP_OR_AM  | CFG_OR_TIMING_FLASH)
-#define CFG_OR0_PRELIM	(CFG_PRELIM_OR_AM | CFG_OR_TIMING_FLASH)
-#define CFG_BR0_PRELIM	((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_V )
+#define CONFIG_SYS_OR0_REMAP	(CONFIG_SYS_REMAP_OR_AM  | CONFIG_SYS_OR_TIMING_FLASH)
+#define CONFIG_SYS_OR0_PRELIM	(CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_FLASH)
+#define CONFIG_SYS_BR0_PRELIM	((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_V )
 
-#define CFG_OR1_REMAP	CFG_OR0_REMAP
-#define CFG_OR1_PRELIM	CFG_OR0_PRELIM
-#define CFG_BR1_PRELIM	((FLASH_BASE1_PRELIM & BR_BA_MSK) | BR_V )
+#define CONFIG_SYS_OR1_REMAP	CONFIG_SYS_OR0_REMAP
+#define CONFIG_SYS_OR1_PRELIM	CONFIG_SYS_OR0_PRELIM
+#define CONFIG_SYS_BR1_PRELIM	((FLASH_BASE1_PRELIM & BR_BA_MSK) | BR_V )
 
 /*
  * BR2/3 and OR2/3 (SDRAM)
@@ -358,13 +360,13 @@
 #define	SDRAM_MAX_SIZE		0x04000000	/* max 64 MB per bank	*/
 
 /* SDRAM timing: Multiplexed addresses, GPL5 output to GPL5_A (don't care)	*/
-#define CFG_OR_TIMING_SDRAM	0x00000A00
+#define CONFIG_SYS_OR_TIMING_SDRAM	0x00000A00
 
-#define CFG_OR2_PRELIM	(CFG_PRELIM_OR_AM | CFG_OR_TIMING_SDRAM )
-#define CFG_BR2_PRELIM	((SDRAM_BASE2_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
+#define CONFIG_SYS_OR2_PRELIM	(CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_SDRAM )
+#define CONFIG_SYS_BR2_PRELIM	((SDRAM_BASE2_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
 
-#define	CFG_OR3_PRELIM	CFG_OR2_PRELIM
-#define CFG_BR3_PRELIM	((SDRAM_BASE3_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
+#define	CONFIG_SYS_OR3_PRELIM	CONFIG_SYS_OR2_PRELIM
+#define CONFIG_SYS_BR3_PRELIM	((SDRAM_BASE3_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
 
 /*
  * Memory Periodic Timer Prescaler
@@ -393,34 +395,34 @@
  * 80 Mhz => 80.000.000 / Divider = 156
  */
 
-#define CFG_PTA_PER_CLK	((4096 * 32 * 1000) / (4 * 64))
-#define CFG_MAMR_PTA	98
+#define CONFIG_SYS_PTA_PER_CLK	((4096 * 32 * 1000) / (4 * 64))
+#define CONFIG_SYS_MAMR_PTA	98
 
 /*
  * For 16 MBit, refresh rates could be 31.3 us
  * (= 64 ms / 2K = 125 / quad bursts).
  * For a simpler initialization, 15.6 us is used instead.
  *
- * #define CFG_MPTPR_2BK_2K	MPTPR_PTP_DIV32		for 2 banks
- * #define CFG_MPTPR_1BK_2K	MPTPR_PTP_DIV64		for 1 bank
+ * #define CONFIG_SYS_MPTPR_2BK_2K	MPTPR_PTP_DIV32		for 2 banks
+ * #define CONFIG_SYS_MPTPR_1BK_2K	MPTPR_PTP_DIV64		for 1 bank
  */
-#define CFG_MPTPR_2BK_4K	MPTPR_PTP_DIV16		/* setting for 2 banks	*/
-#define CFG_MPTPR_1BK_4K	MPTPR_PTP_DIV32		/* setting for 1 bank	*/
+#define CONFIG_SYS_MPTPR_2BK_4K	MPTPR_PTP_DIV16		/* setting for 2 banks	*/
+#define CONFIG_SYS_MPTPR_1BK_4K	MPTPR_PTP_DIV32		/* setting for 1 bank	*/
 
 /* refresh rate 7.8 us (= 64 ms / 8K = 31.2 / quad bursts) for 256 MBit		*/
-#define CFG_MPTPR_2BK_8K	MPTPR_PTP_DIV8		/* setting for 2 banks	*/
-#define CFG_MPTPR_1BK_8K	MPTPR_PTP_DIV16		/* setting for 1 bank	*/
+#define CONFIG_SYS_MPTPR_2BK_8K	MPTPR_PTP_DIV8		/* setting for 2 banks	*/
+#define CONFIG_SYS_MPTPR_1BK_8K	MPTPR_PTP_DIV16		/* setting for 1 bank	*/
 
 /*
  * MAMR settings for SDRAM
  */
 
 /* 8 column SDRAM */
-#define CFG_MAMR_8COL	((CFG_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
+#define CONFIG_SYS_MAMR_8COL	((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
 			 MAMR_AMA_TYPE_0 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A11 |	\
 			 MAMR_RLFA_1X	 | MAMR_WLFA_1X	   | MAMR_TLFA_4X)
 /* 9 column SDRAM */
-#define CFG_MAMR_9COL	((CFG_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
+#define CONFIG_SYS_MAMR_9COL	((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
 			 MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 |	\
 			 MAMR_RLFA_1X	 | MAMR_WLFA_1X	   | MAMR_TLFA_4X)
 
diff --git a/include/configs/FPS860L.h b/include/configs/FPS860L.h
index 84b682415..e5f3b606e 100644
--- a/include/configs/FPS860L.h
+++ b/include/configs/FPS860L.h
@@ -80,7 +80,7 @@
 #define CONFIG_BOOTCOMMAND	"run flash_self"
 
 #define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
-#undef	CFG_LOADS_BAUD_CHANGE		/* don't allow baudrate change	*/
+#undef	CONFIG_SYS_LOADS_BAUD_CHANGE		/* don't allow baudrate change	*/
 
 #undef	CONFIG_WATCHDOG			/* watchdog disabled		*/
 
@@ -124,32 +124,32 @@
 /*
  * Miscellaneous configurable options
  */
-#define	CFG_LONGHELP			/* undef to save memory		*/
-#define	CFG_PROMPT		"=> "	/* Monitor Command Prompt	*/
+#define	CONFIG_SYS_LONGHELP			/* undef to save memory		*/
+#define	CONFIG_SYS_PROMPT		"=> "	/* Monitor Command Prompt	*/
 
 #define CONFIG_CMDLINE_EDITING	1	/* add command line history	*/
-#define CFG_HUSH_PARSER		1	/* Use the HUSH parser		*/
-#ifdef	CFG_HUSH_PARSER
-#define	CFG_PROMPT_HUSH_PS2	"> "
+#define CONFIG_SYS_HUSH_PARSER		1	/* Use the HUSH parser		*/
+#ifdef	CONFIG_SYS_HUSH_PARSER
+#define	CONFIG_SYS_PROMPT_HUSH_PS2	"> "
 #endif
 
 #if defined(CONFIG_CMD_KGDB)
-#define	CFG_CBSIZE	1024		/* Console I/O Buffer Size	*/
+#define	CONFIG_SYS_CBSIZE	1024		/* Console I/O Buffer Size	*/
 #else
-#define	CFG_CBSIZE	256		/* Console I/O Buffer Size	*/
+#define	CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size	*/
 #endif
-#define	CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define	CFG_MAXARGS	16		/* max number of command args	*/
-#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+#define	CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define	CONFIG_SYS_MAXARGS	16		/* max number of command args	*/
+#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
 
-#define CFG_MEMTEST_START	0x0400000	/* memtest works on	*/
-#define CFG_MEMTEST_END		0x0C00000	/* 4 ... 12 MB in DRAM	*/
+#define CONFIG_SYS_MEMTEST_START	0x0400000	/* memtest works on	*/
+#define CONFIG_SYS_MEMTEST_END		0x0C00000	/* 4 ... 12 MB in DRAM	*/
 
-#define	CFG_LOAD_ADDR		0x100000	/* default load address	*/
+#define	CONFIG_SYS_LOAD_ADDR		0x100000	/* default load address	*/
 
-#define	CFG_HZ		1000		/* decrementer freq: 1 ms ticks	*/
+#define	CONFIG_SYS_HZ		1000		/* decrementer freq: 1 ms ticks	*/
 
-#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
 
 /*
  * Low Level Configuration Settings
@@ -159,57 +159,59 @@
 /*-----------------------------------------------------------------------
  * Internal Memory Mapped Register
  */
-#define CFG_IMMR		0xFFF00000
+#define CONFIG_SYS_IMMR		0xFFF00000
 
 /*-----------------------------------------------------------------------
  * Definitions for initial stack pointer and data area (in DPRAM)
  */
-#define CFG_INIT_RAM_ADDR	CFG_IMMR
-#define	CFG_INIT_RAM_END	0x2F00	/* End of used area in DPRAM	*/
-#define	CFG_GBL_DATA_SIZE	64  /* size in bytes reserved for initial data */
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define	CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_IMMR
+#define	CONFIG_SYS_INIT_RAM_END	0x2F00	/* End of used area in DPRAM	*/
+#define	CONFIG_SYS_GBL_DATA_SIZE	64  /* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define	CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
 /*-----------------------------------------------------------------------
  * Start addresses for the final memory configuration
  * (Set up by the startup code)
- * Please note that CFG_SDRAM_BASE _must_ start at 0
+ * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
  */
-#define	CFG_SDRAM_BASE		0x00000000
-#define CFG_FLASH_BASE		0x40000000
-#define	CFG_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor	*/
-#define CFG_MONITOR_BASE	CFG_FLASH_BASE
-#define	CFG_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/
+#define	CONFIG_SYS_SDRAM_BASE		0x00000000
+#define CONFIG_SYS_FLASH_BASE		0x40000000
+#define	CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor	*/
+#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_FLASH_BASE
+#define	CONFIG_SYS_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/
 
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define	CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux	*/
+#define	CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux	*/
 
 /*-----------------------------------------------------------------------
  * FLASH organization
  */
 
 /* use CFI flash driver */
-#define CFG_FLASH_CFI		1	/* Flash is CFI conformant */
+#define CONFIG_SYS_FLASH_CFI		1	/* Flash is CFI conformant */
 #define CONFIG_FLASH_CFI_DRIVER	1	/* Use the common driver */
-#define CFG_FLASH_BANKS_LIST	{ CFG_FLASH_BASE, CFG_FLASH_BASE+flash_info[0].size }
-#define CFG_FLASH_EMPTY_INFO
-#define CFG_FLASH_USE_BUFFER_WRITE	1
-#define CFG_MAX_FLASH_BANKS	2	/* max number of memory banks */
-#define CFG_MAX_FLASH_SECT	71	/* max number of sectors on one chip */
+#define CONFIG_SYS_FLASH_BANKS_LIST	{ CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE+flash_info[0].size }
+#define CONFIG_SYS_FLASH_EMPTY_INFO
+#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE	1
+#define CONFIG_SYS_MAX_FLASH_BANKS	2	/* max number of memory banks */
+#define CONFIG_SYS_MAX_FLASH_SECT	71	/* max number of sectors on one chip */
 
-#define	CFG_ENV_IS_IN_FLASH	1
-#define	CFG_ENV_OFFSET		0x8000	/*   Offset   of Environment Sector	*/
-#define	CFG_ENV_SIZE		0x4000	/* Total Size of Environment Sector	*/
+#define	CONFIG_ENV_IS_IN_FLASH	1
+#define	CONFIG_ENV_OFFSET		0x8000	/*   Offset   of Environment Sector	*/
+#define	CONFIG_ENV_SIZE		0x4000	/* Total Size of Environment Sector	*/
 
 /* Address and size of Redundant Environment Sector	*/
-#define CFG_ENV_OFFSET_REDUND	(CFG_ENV_OFFSET+CFG_ENV_SIZE)
-#define CFG_ENV_SIZE_REDUND	(CFG_ENV_SIZE)
+#define CONFIG_ENV_OFFSET_REDUND	(CONFIG_ENV_OFFSET+CONFIG_ENV_SIZE)
+#define CONFIG_ENV_SIZE_REDUND	(CONFIG_ENV_SIZE)
 
-#define	CFG_USE_PPCENV			/* Environment embedded in sect .ppcenv */
+#define	CONFIG_SYS_USE_PPCENV			/* Environment embedded in sect .ppcenv */
+
+#define CONFIG_MISC_INIT_R		/* Make sure to remap flashes correctly */
 
 /*-----------------------------------------------------------------------
  * Dynamic MTD partition support
@@ -226,16 +228,16 @@
 /*-----------------------------------------------------------------------
  * Hardware Information Block
  */
-#define CFG_HWINFO_OFFSET	0x0003FFC0	/* offset of HW Info block */
-#define CFG_HWINFO_SIZE		0x00000040	/* size   of HW Info block */
-#define CFG_HWINFO_MAGIC	0x54514D38	/* 'TQM8' */
+#define CONFIG_SYS_HWINFO_OFFSET	0x0003FFC0	/* offset of HW Info block */
+#define CONFIG_SYS_HWINFO_SIZE		0x00000040	/* size   of HW Info block */
+#define CONFIG_SYS_HWINFO_MAGIC	0x54514D38	/* 'TQM8' */
 
 /*-----------------------------------------------------------------------
  * Cache Configuration
  */
-#define CFG_CACHELINE_SIZE	16	/* For all MPC8xx CPUs			*/
+#define CONFIG_SYS_CACHELINE_SIZE	16	/* For all MPC8xx CPUs			*/
 #if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT	4	/* log base 2 of the above value	*/
+#define CONFIG_SYS_CACHELINE_SHIFT	4	/* log base 2 of the above value	*/
 #endif
 
 /*-----------------------------------------------------------------------
@@ -245,10 +247,10 @@
  * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze
  */
 #if defined(CONFIG_WATCHDOG)
-#define CFG_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
+#define CONFIG_SYS_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
 			 SYPCR_SWE  | SYPCR_SWRI| SYPCR_SWP)
 #else
-#define CFG_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
+#define CONFIG_SYS_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
 #endif
 
 /*-----------------------------------------------------------------------
@@ -256,27 +258,27 @@
  *-----------------------------------------------------------------------
  * PCMCIA config., multi-function pin tri-state
  */
-#define CFG_SIUMCR	(SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_MLRC01)
+#define CONFIG_SYS_SIUMCR	(SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_MLRC01)
 
 /*-----------------------------------------------------------------------
  * TBSCR - Time Base Status and Control				11-26
  *-----------------------------------------------------------------------
  * Clear Reference Interrupt Status, Timebase freezing enabled
  */
-#define CFG_TBSCR	(TBSCR_REFA | TBSCR_REFB | TBSCR_TBF)
+#define CONFIG_SYS_TBSCR	(TBSCR_REFA | TBSCR_REFB | TBSCR_TBF)
 
 /*-----------------------------------------------------------------------
  * RTCSC - Real-Time Clock Status and Control Register		11-27
  *-----------------------------------------------------------------------
  */
-#define CFG_RTCSC	(RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE)
+#define CONFIG_SYS_RTCSC	(RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE)
 
 /*-----------------------------------------------------------------------
  * PISCR - Periodic Interrupt Status and Control		11-31
  *-----------------------------------------------------------------------
  * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
  */
-#define CFG_PISCR	(PISCR_PS | PISCR_PITF)
+#define CONFIG_SYS_PISCR	(PISCR_PS | PISCR_PITF)
 
 /*-----------------------------------------------------------------------
  * PLPRCR - PLL, Low-Power, and Reset Control Register		15-30
@@ -284,7 +286,7 @@
  * Reset PLL lock status sticky bit, timer expired status bit and timer
  * interrupt status bit - leave PLL multiplication factor unchanged !
  */
-#define CFG_PLPRCR	(PLPRCR_SPLSS | PLPRCR_TEXPS | PLPRCR_TMIST)
+#define CONFIG_SYS_PLPRCR	(PLPRCR_SPLSS | PLPRCR_TEXPS | PLPRCR_TMIST)
 
 /*-----------------------------------------------------------------------
  * SCCR - System Clock and reset Control Register		15-27
@@ -293,7 +295,7 @@
  * power management and some other internal clocks
  */
 #define SCCR_MASK	SCCR_EBDF11
-#define CFG_SCCR	(SCCR_TBS     | \
+#define CONFIG_SYS_SCCR	(SCCR_TBS     | \
 			 SCCR_COM00   | SCCR_DFSYNC00 | SCCR_DFBRG00  | \
 			 SCCR_DFNL000 | SCCR_DFNH000  | SCCR_DFLCD000 | \
 			 SCCR_DFALCD00)
@@ -303,21 +305,21 @@
  *-----------------------------------------------------------------------
  *
  */
-#define CFG_PCMCIA_MEM_ADDR	(0xE0000000)
-#define CFG_PCMCIA_MEM_SIZE	( 64 << 20 )
-#define CFG_PCMCIA_DMA_ADDR	(0xE4000000)
-#define CFG_PCMCIA_DMA_SIZE	( 64 << 20 )
-#define CFG_PCMCIA_ATTRB_ADDR	(0xE8000000)
-#define CFG_PCMCIA_ATTRB_SIZE	( 64 << 20 )
-#define CFG_PCMCIA_IO_ADDR	(0xEC000000)
-#define CFG_PCMCIA_IO_SIZE	( 64 << 20 )
+#define CONFIG_SYS_PCMCIA_MEM_ADDR	(0xE0000000)
+#define CONFIG_SYS_PCMCIA_MEM_SIZE	( 64 << 20 )
+#define CONFIG_SYS_PCMCIA_DMA_ADDR	(0xE4000000)
+#define CONFIG_SYS_PCMCIA_DMA_SIZE	( 64 << 20 )
+#define CONFIG_SYS_PCMCIA_ATTRB_ADDR	(0xE8000000)
+#define CONFIG_SYS_PCMCIA_ATTRB_SIZE	( 64 << 20 )
+#define CONFIG_SYS_PCMCIA_IO_ADDR	(0xEC000000)
+#define CONFIG_SYS_PCMCIA_IO_SIZE	( 64 << 20 )
 
 /*-----------------------------------------------------------------------
  *
  *-----------------------------------------------------------------------
  *
  */
-#define CFG_DER	0
+#define CONFIG_SYS_DER	0
 
 /*
  * Init Memory Controller:
@@ -332,22 +334,22 @@
  * restrict access enough to keep SRAM working (if any)
  * but not too much to meddle with FLASH accesses
  */
-#define CFG_REMAP_OR_AM		0x80000000	/* OR addr mask */
-#define CFG_PRELIM_OR_AM	0xE0000000	/* OR addr mask */
+#define CONFIG_SYS_REMAP_OR_AM		0x80000000	/* OR addr mask */
+#define CONFIG_SYS_PRELIM_OR_AM	0xE0000000	/* OR addr mask */
 
 /*
  * FLASH timing:
  */
-#define CFG_OR_TIMING_FLASH	(OR_ACS_DIV1  | OR_TRLX | OR_CSNT_SAM | \
+#define CONFIG_SYS_OR_TIMING_FLASH	(OR_ACS_DIV1  | OR_TRLX | OR_CSNT_SAM | \
 				 OR_SCY_3_CLK | OR_EHTR | OR_BI)
 
-#define CFG_OR0_REMAP	(CFG_REMAP_OR_AM  | CFG_OR_TIMING_FLASH)
-#define CFG_OR0_PRELIM	(CFG_PRELIM_OR_AM | CFG_OR_TIMING_FLASH)
-#define CFG_BR0_PRELIM	((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_V )
+#define CONFIG_SYS_OR0_REMAP	(CONFIG_SYS_REMAP_OR_AM  | CONFIG_SYS_OR_TIMING_FLASH)
+#define CONFIG_SYS_OR0_PRELIM	(CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_FLASH)
+#define CONFIG_SYS_BR0_PRELIM	((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_V )
 
-#define CFG_OR1_REMAP	CFG_OR0_REMAP
-#define CFG_OR1_PRELIM	CFG_OR0_PRELIM
-#define CFG_BR1_PRELIM	((FLASH_BASE1_PRELIM & BR_BA_MSK) | BR_V )
+#define CONFIG_SYS_OR1_REMAP	CONFIG_SYS_OR0_REMAP
+#define CONFIG_SYS_OR1_PRELIM	CONFIG_SYS_OR0_PRELIM
+#define CONFIG_SYS_BR1_PRELIM	((FLASH_BASE1_PRELIM & BR_BA_MSK) | BR_V )
 
 /*
  * BR2/3 and OR2/3 (SDRAM)
@@ -358,13 +360,13 @@
 #define	SDRAM_MAX_SIZE		0x04000000	/* max 64 MB per bank	*/
 
 /* SDRAM timing: Multiplexed addresses, GPL5 output to GPL5_A (don't care)	*/
-#define CFG_OR_TIMING_SDRAM	0x00000A00
+#define CONFIG_SYS_OR_TIMING_SDRAM	0x00000A00
 
-#define CFG_OR2_PRELIM	(CFG_PRELIM_OR_AM | CFG_OR_TIMING_SDRAM )
-#define CFG_BR2_PRELIM	((SDRAM_BASE2_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
+#define CONFIG_SYS_OR2_PRELIM	(CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_SDRAM )
+#define CONFIG_SYS_BR2_PRELIM	((SDRAM_BASE2_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
 
-#define	CFG_OR3_PRELIM	CFG_OR2_PRELIM
-#define CFG_BR3_PRELIM	((SDRAM_BASE3_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
+#define	CONFIG_SYS_OR3_PRELIM	CONFIG_SYS_OR2_PRELIM
+#define CONFIG_SYS_BR3_PRELIM	((SDRAM_BASE3_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
 
 /*
  * Memory Periodic Timer Prescaler
@@ -393,34 +395,34 @@
  * 80 Mhz => 80.000.000 / Divider = 156
  */
 
-#define CFG_PTA_PER_CLK	((4096 * 32 * 1000) / (4 * 64))
-#define CFG_MAMR_PTA	98
+#define CONFIG_SYS_PTA_PER_CLK	((4096 * 32 * 1000) / (4 * 64))
+#define CONFIG_SYS_MAMR_PTA	98
 
 /*
  * For 16 MBit, refresh rates could be 31.3 us
  * (= 64 ms / 2K = 125 / quad bursts).
  * For a simpler initialization, 15.6 us is used instead.
  *
- * #define CFG_MPTPR_2BK_2K	MPTPR_PTP_DIV32		for 2 banks
- * #define CFG_MPTPR_1BK_2K	MPTPR_PTP_DIV64		for 1 bank
+ * #define CONFIG_SYS_MPTPR_2BK_2K	MPTPR_PTP_DIV32		for 2 banks
+ * #define CONFIG_SYS_MPTPR_1BK_2K	MPTPR_PTP_DIV64		for 1 bank
  */
-#define CFG_MPTPR_2BK_4K	MPTPR_PTP_DIV16		/* setting for 2 banks	*/
-#define CFG_MPTPR_1BK_4K	MPTPR_PTP_DIV32		/* setting for 1 bank	*/
+#define CONFIG_SYS_MPTPR_2BK_4K	MPTPR_PTP_DIV16		/* setting for 2 banks	*/
+#define CONFIG_SYS_MPTPR_1BK_4K	MPTPR_PTP_DIV32		/* setting for 1 bank	*/
 
 /* refresh rate 7.8 us (= 64 ms / 8K = 31.2 / quad bursts) for 256 MBit		*/
-#define CFG_MPTPR_2BK_8K	MPTPR_PTP_DIV8		/* setting for 2 banks	*/
-#define CFG_MPTPR_1BK_8K	MPTPR_PTP_DIV16		/* setting for 1 bank	*/
+#define CONFIG_SYS_MPTPR_2BK_8K	MPTPR_PTP_DIV8		/* setting for 2 banks	*/
+#define CONFIG_SYS_MPTPR_1BK_8K	MPTPR_PTP_DIV16		/* setting for 1 bank	*/
 
 /*
  * MAMR settings for SDRAM
  */
 
 /* 8 column SDRAM */
-#define CFG_MAMR_8COL	((CFG_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
+#define CONFIG_SYS_MAMR_8COL	((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
 			 MAMR_AMA_TYPE_0 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A11 |	\
 			 MAMR_RLFA_1X	 | MAMR_WLFA_1X	   | MAMR_TLFA_4X)
 /* 9 column SDRAM */
-#define CFG_MAMR_9COL	((CFG_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
+#define CONFIG_SYS_MAMR_9COL	((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
 			 MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 |	\
 			 MAMR_RLFA_1X	 | MAMR_WLFA_1X	   | MAMR_TLFA_4X)
 
diff --git a/include/configs/G2000.h b/include/configs/G2000.h
index c12ce48b6..d299044cb 100644
--- a/include/configs/G2000.h
+++ b/include/configs/G2000.h
@@ -76,10 +76,11 @@
 	""
 #define CONFIG_BOOTCOMMAND	"run net_nfs"
 
-#define CFG_LOADS_BAUD_CHANGE	1	/* allow baudrate change	*/
+#define CONFIG_SYS_LOADS_BAUD_CHANGE	1	/* allow baudrate change	*/
 
 #define CONFIG_NET_MULTI	1
 
+#define CONFIG_PPC4xx_EMAC
 #define CONFIG_MII		1	/* MII PHY management		*/
 #define CONFIG_PHY_ADDR		0	/* PHY address			*/
 #define CONFIG_PHY1_ADDR	1	/* PHY address			*/
@@ -124,53 +125,53 @@
 /*
  * Miscellaneous configurable options
  */
-#define CFG_LONGHELP			/* undef to save memory		*/
-#define CFG_PROMPT	"=> "		/* Monitor Command Prompt	*/
+#define CONFIG_SYS_LONGHELP			/* undef to save memory		*/
+#define CONFIG_SYS_PROMPT	"=> "		/* Monitor Command Prompt	*/
 
-#undef	CFG_HUSH_PARSER			/* use "hush" command parser	*/
-#ifdef	CFG_HUSH_PARSER
-#define CFG_PROMPT_HUSH_PS2	"> "
+#undef	CONFIG_SYS_HUSH_PARSER			/* use "hush" command parser	*/
+#ifdef	CONFIG_SYS_HUSH_PARSER
+#define CONFIG_SYS_PROMPT_HUSH_PS2	"> "
 #endif
 
 #if defined(CONFIG_CMD_KGDB)
-#define CFG_CBSIZE	1024		/* Console I/O Buffer Size	*/
+#define CONFIG_SYS_CBSIZE	1024		/* Console I/O Buffer Size	*/
 #else
-#define CFG_CBSIZE	256		/* Console I/O Buffer Size	*/
+#define CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size	*/
 #endif
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define CFG_MAXARGS	16		/* max number of command args	*/
-#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS	16		/* max number of command args	*/
+#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
 
-#define CFG_DEVICE_NULLDEV	1	/* include nulldev device	*/
+#define CONFIG_SYS_DEVICE_NULLDEV	1	/* include nulldev device	*/
 
-#define CFG_CONSOLE_INFO_QUIET	1	/* don't print console @ startup*/
+#define CONFIG_SYS_CONSOLE_INFO_QUIET	1	/* don't print console @ startup*/
 
 #define CONFIG_AUTO_COMPLETE	1       /* add autocompletion support   */
 
-#define CFG_MEMTEST_START	0x0400000	/* memtest works on	*/
-#define CFG_MEMTEST_END		0x0C00000	/* 4 ... 12 MB in DRAM	*/
+#define CONFIG_SYS_MEMTEST_START	0x0400000	/* memtest works on	*/
+#define CONFIG_SYS_MEMTEST_END		0x0C00000	/* 4 ... 12 MB in DRAM	*/
 
-#undef	CFG_EXT_SERIAL_CLOCK	       /* no external serial clock used */
-#define CFG_IGNORE_405_UART_ERRATA_59	/* ignore ppc405gp errata #59	*/
-#define CFG_BASE_BAUD	    691200
+#undef	CONFIG_SYS_EXT_SERIAL_CLOCK	       /* no external serial clock used */
+#define CONFIG_SYS_IGNORE_405_UART_ERRATA_59	/* ignore ppc405gp errata #59	*/
+#define CONFIG_SYS_BASE_BAUD	    691200
 #undef	CONFIG_UART1_CONSOLE		/* define for uart1 as console	*/
 
 /* The following table includes the supported baudrates */
-#define CFG_BAUDRATE_TABLE	\
+#define CONFIG_SYS_BAUDRATE_TABLE	\
 	{ 300, 600, 1200, 2400, 4800, 9600, 19200, 38400,     \
 	 57600, 115200, 230400, 460800, 921600 }
 
-#define CFG_LOAD_ADDR	0x100000	/* default load address */
-#define CFG_EXTBDINFO	1		/* To use extended board_into (bd_t) */
+#define CONFIG_SYS_LOAD_ADDR	0x100000	/* default load address */
+#define CONFIG_SYS_EXTBDINFO	1		/* To use extended board_into (bd_t) */
 
-#define CFG_HZ		1000		/* decrementer freq: 1 ms ticks */
+#define CONFIG_SYS_HZ		1000		/* decrementer freq: 1 ms ticks */
 
 #define CONFIG_ZERO_BOOTDELAY_CHECK	/* check for keypress on bootdelay==0 */
 #define CONFIG_BOOTDELAY	3	/* autoboot after 3 seconds	*/
 
 #define CONFIG_VERSION_VARIABLE 1	/* include version env variable */
 
-#define CFG_RX_ETH_BUFFER	16	/* use 16 rx buffer on 405 emac */
+#define CONFIG_SYS_RX_ETH_BUFFER	16	/* use 16 rx buffer on 405 emac */
 
 /*----------------------------------------------------------------------------*/
 /* adding Ethernet setting:  FTS OUI 00:11:0B */
@@ -188,14 +189,14 @@
  *-----------------------------------------------------------------------
  */
 #define CONFIG_RTC_DS1337
-#define CFG_I2C_RTC_ADDR	0x68
+#define CONFIG_SYS_I2C_RTC_ADDR	0x68
 
 #if 0 /* test-only */
 /*-----------------------------------------------------------------------
  * NAND-FLASH stuff
  *-----------------------------------------------------------------------
  */
-#define CFG_MAX_NAND_DEVICE	1	/* Max number of NAND devices		*/
+#define CONFIG_SYS_MAX_NAND_DEVICE	1	/* Max number of NAND devices		*/
 #define SECTORSIZE 512
 
 #define ADDR_COLUMN 1
@@ -206,18 +207,18 @@
 #define NAND_MAX_FLOORS 1
 #define NAND_MAX_CHIPS 1
 
-#define CFG_NAND_CE  (0x80000000 >> 1)	/* our CE is GPIO1 */
-#define CFG_NAND_CLE (0x80000000 >> 2)	/* our CLE is GPIO2 */
-#define CFG_NAND_ALE (0x80000000 >> 3)	/* our ALE is GPIO3 */
-#define CFG_NAND_RDY (0x80000000 >> 4)	/* our RDY is GPIO4 */
+#define CONFIG_SYS_NAND_CE  (0x80000000 >> 1)	/* our CE is GPIO1 */
+#define CONFIG_SYS_NAND_CLE (0x80000000 >> 2)	/* our CLE is GPIO2 */
+#define CONFIG_SYS_NAND_ALE (0x80000000 >> 3)	/* our ALE is GPIO3 */
+#define CONFIG_SYS_NAND_RDY (0x80000000 >> 4)	/* our RDY is GPIO4 */
 
-#define NAND_DISABLE_CE(nand) do { out32(GPIO0_OR, in32(GPIO0_OR) | CFG_NAND_CE);} while(0)
-#define NAND_ENABLE_CE(nand) do { out32(GPIO0_OR, in32(GPIO0_OR) & ~CFG_NAND_CE);} while(0)
-#define NAND_CTL_CLRALE(nandptr) do { out32(GPIO0_OR, in32(GPIO0_OR) & ~CFG_NAND_ALE);} while(0)
-#define NAND_CTL_SETALE(nandptr) do { out32(GPIO0_OR, in32(GPIO0_OR) | CFG_NAND_ALE);} while(0)
-#define NAND_CTL_CLRCLE(nandptr) do { out32(GPIO0_OR, in32(GPIO0_OR) & ~CFG_NAND_CLE);} while(0)
-#define NAND_CTL_SETCLE(nandptr) do { out32(GPIO0_OR, in32(GPIO0_OR) | CFG_NAND_CLE);} while(0)
-#define NAND_WAIT_READY(nand) while (!(in32(GPIO0_IR) & CFG_NAND_RDY))
+#define NAND_DISABLE_CE(nand) do { out32(GPIO0_OR, in32(GPIO0_OR) | CONFIG_SYS_NAND_CE);} while(0)
+#define NAND_ENABLE_CE(nand) do { out32(GPIO0_OR, in32(GPIO0_OR) & ~CONFIG_SYS_NAND_CE);} while(0)
+#define NAND_CTL_CLRALE(nandptr) do { out32(GPIO0_OR, in32(GPIO0_OR) & ~CONFIG_SYS_NAND_ALE);} while(0)
+#define NAND_CTL_SETALE(nandptr) do { out32(GPIO0_OR, in32(GPIO0_OR) | CONFIG_SYS_NAND_ALE);} while(0)
+#define NAND_CTL_CLRCLE(nandptr) do { out32(GPIO0_OR, in32(GPIO0_OR) & ~CONFIG_SYS_NAND_CLE);} while(0)
+#define NAND_CTL_SETCLE(nandptr) do { out32(GPIO0_OR, in32(GPIO0_OR) | CONFIG_SYS_NAND_CLE);} while(0)
+#define NAND_WAIT_READY(nand) while (!(in32(GPIO0_IR) & CONFIG_SYS_NAND_RDY))
 
 #define WRITE_NAND_COMMAND(d, adr) do{ *(volatile __u8 *)((unsigned long)adr) = (__u8)(d); } while(0)
 #define WRITE_NAND_ADDRESS(d, adr) do{ *(volatile __u8 *)((unsigned long)adr) = (__u8)(d); } while(0)
@@ -242,73 +243,73 @@
 
 #define CONFIG_PCI_CONFIG_HOST_BRIDGE 1 /* don't skip host bridge config*/
 
-#define CFG_PCI_SUBSYS_VENDORID 0x12FE  /* PCI Vendor ID: esd gmbh      */
-#define CFG_PCI_SUBSYS_DEVICEID 0x0405  /* PCI Device ID: CPCI-405      */
-#define CFG_PCI_CLASSCODE       0x0b20  /* PCI Class Code: Processor/PPC*/
-#define CFG_PCI_PTM1LA  0x00000000      /* point to sdram               */
-#define CFG_PCI_PTM1MS  0xfc000001      /* 64MB, enable hard-wired to 1 */
-#define CFG_PCI_PTM1PCI 0x00000000      /* Host: use this pci address   */
-#define CFG_PCI_PTM2LA  0xffc00000      /* point to flash               */
-#define CFG_PCI_PTM2MS  0xffc00001      /* 4MB, enable                  */
-#define CFG_PCI_PTM2PCI 0x04000000      /* Host: use this pci address   */
+#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x12FE  /* PCI Vendor ID: esd gmbh      */
+#define CONFIG_SYS_PCI_SUBSYS_DEVICEID 0x0405  /* PCI Device ID: CPCI-405      */
+#define CONFIG_SYS_PCI_CLASSCODE       0x0b20  /* PCI Class Code: Processor/PPC*/
+#define CONFIG_SYS_PCI_PTM1LA  0x00000000      /* point to sdram               */
+#define CONFIG_SYS_PCI_PTM1MS  0xfc000001      /* 64MB, enable hard-wired to 1 */
+#define CONFIG_SYS_PCI_PTM1PCI 0x00000000      /* Host: use this pci address   */
+#define CONFIG_SYS_PCI_PTM2LA  0xffc00000      /* point to flash               */
+#define CONFIG_SYS_PCI_PTM2MS  0xffc00001      /* 4MB, enable                  */
+#define CONFIG_SYS_PCI_PTM2PCI 0x04000000      /* Host: use this pci address   */
 
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
+#define CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
 
 /*-----------------------------------------------------------------------
  * FLASH organization
  */
 #if 0 /* APC405 */
-#define CFG_FLASH_CFI		1	/* Flash is CFI conformant		*/
-#define CFG_MAX_FLASH_SECT	128	/* max number of sectors on one chip	*/
-#define CFG_MAX_FLASH_BANKS	2	/* max number of memory banks		*/
-#undef CFG_FLASH_PROTECTION		/* don't use hardware protection	*/
-#define CFG_FLASH_USE_BUFFER_WRITE 1	/* use buffered writes (20x faster)	*/
-#define CFG_FLASH_BASE		0xFE000000 /* test-only...*/
-#define CFG_FLASH_INCREMENT	0x01000000 /* test-only */
+#define CONFIG_SYS_FLASH_CFI		1	/* Flash is CFI conformant		*/
+#define CONFIG_SYS_MAX_FLASH_SECT	128	/* max number of sectors on one chip	*/
+#define CONFIG_SYS_MAX_FLASH_BANKS	2	/* max number of memory banks		*/
+#undef CONFIG_SYS_FLASH_PROTECTION		/* don't use hardware protection	*/
+#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1	/* use buffered writes (20x faster)	*/
+#define CONFIG_SYS_FLASH_BASE		0xFE000000 /* test-only...*/
+#define CONFIG_SYS_FLASH_INCREMENT	0x01000000 /* test-only */
 #else /* G2000 */
-#define CFG_FLASH_CFI		1	/* Flash is CFI conformant		*/
-#define CFG_MAX_FLASH_SECT	128	/* max number of sectors on one chip	*/
-#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
-#undef CFG_FLASH_PROTECTION		/* don't use hardware protection	*/
-#define CFG_FLASH_USE_BUFFER_WRITE 1	/* use buffered writes (20x faster)	*/
-#define CFG_FLASH_BASE		0xFF800000 /* test-only...*/
-#define CFG_FLASH_INCREMENT	0x01000000 /* test-only */
+#define CONFIG_SYS_FLASH_CFI		1	/* Flash is CFI conformant		*/
+#define CONFIG_SYS_MAX_FLASH_SECT	128	/* max number of sectors on one chip	*/
+#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
+#undef CONFIG_SYS_FLASH_PROTECTION		/* don't use hardware protection	*/
+#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1	/* use buffered writes (20x faster)	*/
+#define CONFIG_SYS_FLASH_BASE		0xFF800000 /* test-only...*/
+#define CONFIG_SYS_FLASH_INCREMENT	0x01000000 /* test-only */
 #endif
 
-#define CFG_FLASH_EMPTY_INFO            /* print 'E' for empty sector on flinfo */
+#define CONFIG_SYS_FLASH_EMPTY_INFO            /* print 'E' for empty sector on flinfo */
 
-#define CFG_JFFS2_FIRST_BANK    0           /* use for JFFS2 */
-#define CFG_JFFS2_NUM_BANKS     1           /* ! second bank contains u-boot    */
+#define CONFIG_SYS_JFFS2_FIRST_BANK    0           /* use for JFFS2 */
+#define CONFIG_SYS_JFFS2_NUM_BANKS     1           /* ! second bank contains u-boot    */
 
 /*-----------------------------------------------------------------------
  * Start addresses for the final memory configuration
  * (Set up by the startup code)
- * Please note that CFG_SDRAM_BASE _must_ start at 0
+ * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
  */
-#define CFG_SDRAM_BASE		0x00000000
-#define CFG_MONITOR_BASE	0xFFFC0000
-#define CFG_MONITOR_LEN		(256 * 1024)	/* Reserve 256 kB for Monitor	*/
-#define CFG_MALLOC_LEN		(256 * 1024)	/* Reserve 256 kB for malloc()	*/
+#define CONFIG_SYS_SDRAM_BASE		0x00000000
+#define CONFIG_SYS_MONITOR_BASE	0xFFFC0000
+#define CONFIG_SYS_MONITOR_LEN		(256 * 1024)	/* Reserve 256 kB for Monitor	*/
+#define CONFIG_SYS_MALLOC_LEN		(256 * 1024)	/* Reserve 256 kB for malloc()	*/
 
 /*-----------------------------------------------------------------------
  * Environment Variable setup
  */
 #if 1 /* test-only */
-#define CFG_ENV_IS_IN_EEPROM	1	/* use EEPROM for environment vars */
-#define CFG_ENV_OFFSET		0x100	/* environment starts at the beginning of the EEPROM */
-#define CFG_ENV_SIZE		0x700	/* 2048 bytes may be used for env vars*/
+#define CONFIG_ENV_IS_IN_EEPROM	1	/* use EEPROM for environment vars */
+#define CONFIG_ENV_OFFSET		0x100	/* environment starts at the beginning of the EEPROM */
+#define CONFIG_ENV_SIZE		0x700	/* 2048 bytes may be used for env vars*/
 				   /* total size of a CAT24WC16 is 2048 bytes */
 
 #else	/* DEFAULT: environment in flash, using redundand flash sectors */
 
-#define CFG_ENV_IS_IN_FLASH	1	/* use FLASH for environment vars */
-#define CFG_ENV_ADDR		0xFFFA0000 /* environment starts before u-boot */
-#define CFG_ENV_SECT_SIZE	0x20000	/* 128k bytes may be used for env vars*/
+#define CONFIG_ENV_IS_IN_FLASH	1	/* use FLASH for environment vars */
+#define CONFIG_ENV_ADDR		0xFFFA0000 /* environment starts before u-boot */
+#define CONFIG_ENV_SECT_SIZE	0x20000	/* 128k bytes may be used for env vars*/
 
 #endif
 
@@ -316,63 +317,62 @@
  * I2C EEPROM (CAT24WC16) for environment
  */
 #define CONFIG_HARD_I2C			/* I2c with hardware support */
-#define CFG_I2C_SPEED		400000	/* I2C speed and slave address */
-#define CFG_I2C_SLAVE		0x7F
+#define CONFIG_SYS_I2C_SPEED		400000	/* I2C speed and slave address */
+#define CONFIG_SYS_I2C_SLAVE		0x7F
 
-#define CFG_I2C_EEPROM_ADDR	0x50	/* EEPROM CAT24WC08		*/
+#define CONFIG_SYS_I2C_EEPROM_ADDR	0x50	/* EEPROM CAT24WC08		*/
 /* CAT24WC08/16... */
-#define CFG_I2C_EEPROM_ADDR_LEN 1	/* Bytes of address		*/
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1	/* Bytes of address		*/
 /* mask of address bits that overflow into the "EEPROM chip address"	*/
-#define CFG_I2C_EEPROM_ADDR_OVERFLOW	0x07
-#define CFG_EEPROM_PAGE_WRITE_BITS 4	/* The Catalyst CAT24WC08 has	*/
+#define CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW	0x07
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 4	/* The Catalyst CAT24WC08 has	*/
 					/* 16 byte page write mode using*/
 					/* last 4 bits of the address	*/
-#define CFG_EEPROM_PAGE_WRITE_DELAY_MS	10   /* and takes up to 10 msec */
-#define CFG_EEPROM_PAGE_WRITE_ENABLE
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	10   /* and takes up to 10 msec */
 
 /*-----------------------------------------------------------------------
  * External Bus Controller (EBC) Setup
  */
 
 /* Memory Bank 0 (Intel Strata Flash) initialization                            */
-#define CFG_EBC_PB0AP   0x92015480
-#define CFG_EBC_PB0CR   0xFF87A000          /* BAS=0xFF8,BS=08MB,BU=R/W,BW=16bit*/
+#define CONFIG_SYS_EBC_PB0AP   0x92015480
+#define CONFIG_SYS_EBC_PB0CR   0xFF87A000          /* BAS=0xFF8,BS=08MB,BU=R/W,BW=16bit*/
 
 /* Memory Bank 1 ( Power TAU) initialization               */
-/* #define CFG_EBC_PB1AP           0x04041000 */
-/* #define CFG_EBC_PB1CR           0xF0018000   */  /* BAS=0xF00,BS=1MB,BU=R/W,BW=8bit  */
-#define CFG_EBC_PB1AP           0x00000000
-#define CFG_EBC_PB1CR           0x00000000
+/* #define CONFIG_SYS_EBC_PB1AP           0x04041000 */
+/* #define CONFIG_SYS_EBC_PB1CR           0xF0018000   */  /* BAS=0xF00,BS=1MB,BU=R/W,BW=8bit  */
+#define CONFIG_SYS_EBC_PB1AP           0x00000000
+#define CONFIG_SYS_EBC_PB1CR           0x00000000
 
 /* Memory Bank 2 (Intel Flash) initialization                 */
-#define CFG_EBC_PB2AP           0x00000000
-#define CFG_EBC_PB2CR           0x00000000
+#define CONFIG_SYS_EBC_PB2AP           0x00000000
+#define CONFIG_SYS_EBC_PB2CR           0x00000000
 
 /* Memory Bank 3 (NAND) initialization                        */
-#define CFG_EBC_PB3AP           0x92015480
-#define CFG_EBC_PB3CR           0xF40B8000  /*addr 0xF40, BS=32M,BU=R/W, BW=8bit */
+#define CONFIG_SYS_EBC_PB3AP           0x92015480
+#define CONFIG_SYS_EBC_PB3CR           0xF40B8000  /*addr 0xF40, BS=32M,BU=R/W, BW=8bit */
 
 /* Memory Bank 4 (FPGA regs) initialization                                     */
-#define CFG_EBC_PB4AP           0x00000000
-#define CFG_EBC_PB4CR           0x00000000  /* leave it blank  */
+#define CONFIG_SYS_EBC_PB4AP           0x00000000
+#define CONFIG_SYS_EBC_PB4CR           0x00000000  /* leave it blank  */
 
-#define CFG_NAND_BASE   0xF4000000
+#define CONFIG_SYS_NAND_BASE   0xF4000000
 
 /*-----------------------------------------------------------------------
  * Definitions for initial stack pointer and data area (in data cache)
  */
 /* use on chip memory ( OCM ) for temperary stack until sdram is tested */
-#define CFG_TEMP_STACK_OCM	  1
+#define CONFIG_SYS_TEMP_STACK_OCM	  1
 
 /* On Chip Memory location */
-#define CFG_OCM_DATA_ADDR	0xF8000000
-#define CFG_OCM_DATA_SIZE	0x1000
-#define CFG_INIT_RAM_ADDR	CFG_OCM_DATA_ADDR /* inside of SDRAM		*/
-#define CFG_INIT_RAM_END	CFG_OCM_DATA_SIZE /* End of used area in RAM	*/
+#define CONFIG_SYS_OCM_DATA_ADDR	0xF8000000
+#define CONFIG_SYS_OCM_DATA_SIZE	0x1000
+#define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_OCM_DATA_ADDR /* inside of SDRAM		*/
+#define CONFIG_SYS_INIT_RAM_END	CONFIG_SYS_OCM_DATA_SIZE /* End of used area in RAM	*/
 
-#define CFG_GBL_DATA_SIZE      128  /* size in bytes reserved for initial data */
-#define CFG_GBL_DATA_OFFSET    (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_GBL_DATA_SIZE      128  /* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET    (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
 /*-----------------------------------------------------------------------
  * Definitions for GPIO setup (PPC405EP specific)
@@ -388,13 +388,13 @@
  *
  * following GPIO setting changed for G20000, 080304
  */
-#define CFG_GPIO0_OSRH          0x40005555
-#define CFG_GPIO0_OSRL          0x40000110
-#define CFG_GPIO0_ISR1H         0x00000000
-#define CFG_GPIO0_ISR1L         0x15555445
-#define CFG_GPIO0_TSRH          0x00000000
-#define CFG_GPIO0_TSRL          0x00000000
-#define CFG_GPIO0_TCR           0xF7FF8014
+#define CONFIG_SYS_GPIO0_OSRH          0x40005555
+#define CONFIG_SYS_GPIO0_OSRL          0x40000110
+#define CONFIG_SYS_GPIO0_ISR1H         0x00000000
+#define CONFIG_SYS_GPIO0_ISR1L         0x15555445
+#define CONFIG_SYS_GPIO0_TSRH          0x00000000
+#define CONFIG_SYS_GPIO0_TSRL          0x00000000
+#define CONFIG_SYS_GPIO0_TCR           0xF7FF8014
 
 /*
  * Internal Definitions
diff --git a/include/configs/GEN860T.h b/include/configs/GEN860T.h
index 422ed32aa..a399d22a7 100644
--- a/include/configs/GEN860T.h
+++ b/include/configs/GEN860T.h
@@ -64,7 +64,7 @@
 /*
  * Set allowable console baud rates
  */
-#define CFG_BAUDRATE_TABLE		{ 9600,		\
+#define CONFIG_SYS_BAUDRATE_TABLE		{ 9600,		\
 					  19200,	\
 					  38400,	\
 					  57600,	\
@@ -74,7 +74,7 @@
 /*
  * Print console information
  */
-#undef	 CFG_CONSOLE_INFO_QUIET
+#undef	 CONFIG_SYS_CONSOLE_INFO_QUIET
 
 /*
  * Set the autoboot delay in seconds.  A delay of -1 disables autoboot
@@ -101,12 +101,12 @@
  * for downloads
  */
 #undef	CONFIG_LOADS_ECHO
-#define	CFG_LOADS_BAUD_CHANGE
+#define	CONFIG_SYS_LOADS_BAUD_CHANGE
 
 /*
  * Set default load address for tftp network downloads
  */
-#define	CFG_TFTP_LOADADDR				0x01000000
+#define	CONFIG_SYS_TFTP_LOADADDR				0x01000000
 
 /*
  * Turn off the watchdog timer
@@ -127,7 +127,7 @@
  * Reset address. We pick an address such that when an instruction
  * is executed at that address, a machine check exception occurs
  */
-#define CFG_RESET_ADDRESS				((ulong) -1)
+#define CONFIG_SYS_RESET_ADDRESS				((ulong) -1)
 
 /*
  * BOOTP options
@@ -145,7 +145,7 @@
  * MII address is hardwired on the board to zero.
  */
 #define CONFIG_FEC_ENET
-#define CFG_DISCOVER_PHY
+#define CONFIG_SYS_DISCOVER_PHY
 #define CONFIG_MII
 #define CONFIG_MII_INIT			1
 #define CONFIG_PHY_ADDR			0
@@ -162,11 +162,11 @@
  * This board has a 32 kibibyte EEPROM (Atmel AT24C256) connected to
  * the MPC860T I2C interface.
  */
-#define CFG_I2C_EEPROM_ADDR				0x50
-#define CFG_EEPROM_PAGE_WRITE_BITS		6		/* 64 byte pages		*/
-#define CFG_EEPROM_PAGE_WRITE_DELAY_MS	12		/* 10 mS w/ 20% margin	*/
-#define	CFG_I2C_EEPROM_ADDR_LEN			2		/* need 16 bit address	*/
-#define CFG_ENV_EEPROM_SIZE				(32 * 1024)
+#define CONFIG_SYS_I2C_EEPROM_ADDR				0x50
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS		6		/* 64 byte pages		*/
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	12		/* 10 mS w/ 20% margin	*/
+#define	CONFIG_SYS_I2C_EEPROM_ADDR_LEN			2		/* need 16 bit address	*/
+#define CONFIG_ENV_EEPROM_SIZE				(32 * 1024)
 
 /*
  * Enable I2C and select the hardware/software driver
@@ -175,8 +175,8 @@
 #undef	CONFIG_SOFT_I2C						/* Bit-banged I2C			*/
 
 #ifdef CONFIG_HARD_I2C
-#define	CFG_I2C_SPEED		100000			/* clock speed in Hz		*/
-#define CFG_I2C_SLAVE		0xFE			/* I2C slave address		*/
+#define	CONFIG_SYS_I2C_SPEED		100000			/* clock speed in Hz		*/
+#define CONFIG_SYS_I2C_SLAVE		0xFE			/* I2C slave address		*/
 #endif
 
 #ifdef CONFIG_SOFT_I2C
@@ -208,7 +208,7 @@
  * length of time, so we use an external RTC on the I2C bus instead.
  */
 #define CONFIG_RTC_DS1337
-#define CFG_I2C_RTC_ADDR				0x68
+#define CONFIG_SYS_I2C_RTC_ADDR				0x68
 
 #else
 /*
@@ -220,11 +220,11 @@
 /*
  * Power On Self Test support
  */
-#define CONFIG_POST			  ( CFG_POST_CACHE		| \
-								CFG_POST_MEMORY		| \
-								CFG_POST_CPU		| \
-								CFG_POST_UART		| \
-								CFG_POST_SPR )
+#define CONFIG_POST			  ( CONFIG_SYS_POST_CACHE		| \
+								CONFIG_SYS_POST_MEMORY		| \
+								CONFIG_SYS_POST_CPU		| \
+								CONFIG_SYS_POST_UART		| \
+								CONFIG_SYS_POST_SPR )
 
 
 /*
@@ -277,7 +277,7 @@
 #define CONFIG_FPGA
 #define CONFIG_FPGA_XILINX
 #define CONFIG_FPGA_VIRTEX2
-#define CFG_FPGA_PROG_FEEDBACK
+#define CONFIG_SYS_FPGA_PROG_FEEDBACK
 
 
 #define CONFIG_NAND_LEGACY
@@ -285,64 +285,64 @@
 /*
  * Verbose help from command monitor.
  */
-#define	CFG_LONGHELP
+#define	CONFIG_SYS_LONGHELP
 #if !defined(CONFIG_SC)
-#define	CFG_PROMPT			"B2> "
+#define	CONFIG_SYS_PROMPT			"B2> "
 #else
-#define	CFG_PROMPT			"SC> "
+#define	CONFIG_SYS_PROMPT			"SC> "
 #endif
 
 
 /*
  * Use the "hush" command parser
  */
-#define	CFG_HUSH_PARSER
-#define	CFG_PROMPT_HUSH_PS2	"> "
+#define	CONFIG_SYS_HUSH_PARSER
+#define	CONFIG_SYS_PROMPT_HUSH_PS2	"> "
 
 /*
  * Set buffer size for console I/O
  */
 #if defined(CONFIG_CMD_KGDB)
-#define	CFG_CBSIZE			1024
+#define	CONFIG_SYS_CBSIZE			1024
 #else
-#define	CFG_CBSIZE			256
+#define	CONFIG_SYS_CBSIZE			256
 #endif
 
 /*
  * Print buffer size
  */
-#define	CFG_PBSIZE (CFG_CBSIZE + sizeof(CFG_PROMPT) + 16)
+#define	CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
 
 /*
  * Maximum number of arguments that a command can accept
  */
-#define	CFG_MAXARGS			16
+#define	CONFIG_SYS_MAXARGS			16
 
 /*
  * Boot argument buffer size
  */
-#define CFG_BARGSIZE		CFG_CBSIZE
+#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE
 
 /*
  * Default memory test range
  */
-#define CFG_MEMTEST_START	0x0100000
-#define CFG_MEMTEST_END		(CFG_MEMTEST_START  + (128 * 1024))
+#define CONFIG_SYS_MEMTEST_START	0x0100000
+#define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_MEMTEST_START  + (128 * 1024))
 
 /*
  * Select the more full-featured memory test
  */
-#define	CFG_ALT_MEMTEST
+#define	CONFIG_SYS_ALT_MEMTEST
 
 /*
  * Default load address
  */
-#define	CFG_LOAD_ADDR		0x01000000
+#define	CONFIG_SYS_LOAD_ADDR		0x01000000
 
 /*
  * Set decrementer frequency (1 ms ticks)
  */
-#define	CFG_HZ				1000
+#define	CONFIG_SYS_HZ				1000
 
 /*
  * Device memory map (after SDRAM remap to 0x0):
@@ -363,7 +363,7 @@
 /*
  * Base addresses and block sizes
  */
-#define CFG_IMMR			0xFF000000
+#define CONFIG_SYS_IMMR			0xFF000000
 
 #define SDRAM_BASE			0x00000000
 #define SDRAM_SIZE			(64 * 1024 * 1024)
@@ -386,27 +386,27 @@
 /*
  * Definitions for initial stack pointer and data area (in DPRAM)
  */
-#define CFG_INIT_RAM_ADDR		CFG_IMMR
-#define	CFG_INIT_RAM_END		0x2F00	/* End of used area in DPRAM		*/
-#define	CFG_INIT_DATA_SIZE		64	/* # bytes reserved for initial data*/
-#define CFG_GBL_DATA_OFFSET		(CFG_INIT_RAM_END - CFG_INIT_DATA_SIZE)
-#define	CFG_INIT_SP_OFFSET		CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_INIT_RAM_ADDR		CONFIG_SYS_IMMR
+#define	CONFIG_SYS_INIT_RAM_END		0x2F00	/* End of used area in DPRAM		*/
+#define	CONFIG_SYS_INIT_DATA_SIZE		64	/* # bytes reserved for initial data*/
+#define CONFIG_SYS_GBL_DATA_OFFSET		(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_INIT_DATA_SIZE)
+#define	CONFIG_SYS_INIT_SP_OFFSET		CONFIG_SYS_GBL_DATA_OFFSET
 
 /*
  * Start addresses for the final memory configuration
  * (Set up by the startup code)
- * Please note that CFG_SDRAM_BASE _must_ start at 0
+ * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
  */
-#define	CFG_SDRAM_BASE			SDRAM_BASE
+#define	CONFIG_SYS_SDRAM_BASE			SDRAM_BASE
 
 /*
  * FLASH organization
  */
-#define CFG_FLASH_BASE			FLASH_BASE
-#define CFG_FLASH_SIZE			FLASH_SIZE
-#define CFG_FLASH_SECT_SIZE		(128 * 1024)
-#define CFG_MAX_FLASH_BANKS		1
-#define CFG_MAX_FLASH_SECT		128
+#define CONFIG_SYS_FLASH_BASE			FLASH_BASE
+#define CONFIG_SYS_FLASH_SIZE			FLASH_SIZE
+#define CONFIG_SYS_FLASH_SECT_SIZE		(128 * 1024)
+#define CONFIG_SYS_MAX_FLASH_BANKS		1
+#define CONFIG_SYS_MAX_FLASH_SECT		128
 
 /*
  * The timeout values are for an entire chip and are in milliseconds.
@@ -415,60 +415,60 @@
  * case VCC and temp after 100K programming cycles.  It works out
  * to 280 minutes (might as well be forever).
  */
-#define CFG_FLASH_ERASE_TOUT	(CFG_MAX_FLASH_SECT * 5000)
-#define CFG_FLASH_WRITE_TOUT	(CFG_MAX_FLASH_SECT * 128 * 1024 * 1)
+#define CONFIG_SYS_FLASH_ERASE_TOUT	(CONFIG_SYS_MAX_FLASH_SECT * 5000)
+#define CONFIG_SYS_FLASH_WRITE_TOUT	(CONFIG_SYS_MAX_FLASH_SECT * 128 * 1024 * 1)
 
 /*
  * Allow direct writes to FLASH from tftp transfers (** dangerous **)
  */
-#define	CFG_DIRECT_FLASH_TFTP
+#define	CONFIG_SYS_DIRECT_FLASH_TFTP
 
 /*
  * Reserve memory for U-Boot.
  */
-#define CFG_MAX_UBOOT_SECTS		4
-#define	CFG_MONITOR_LEN			(CFG_MAX_UBOOT_SECTS * CFG_FLASH_SECT_SIZE)
-#define CFG_MONITOR_BASE		CFG_FLASH_BASE
+#define CONFIG_SYS_MAX_UBOOT_SECTS		4
+#define	CONFIG_SYS_MONITOR_LEN			(CONFIG_SYS_MAX_UBOOT_SECTS * CONFIG_SYS_FLASH_SECT_SIZE)
+#define CONFIG_SYS_MONITOR_BASE		CONFIG_SYS_FLASH_BASE
 
 /*
  * Select environment placement.  NOTE that u-boot.lds must
  * be edited if this is changed!
  */
-#undef	CFG_ENV_IS_IN_FLASH
-#define CFG_ENV_IS_IN_EEPROM
+#undef	CONFIG_ENV_IS_IN_FLASH
+#define CONFIG_ENV_IS_IN_EEPROM
 
-#if defined(CFG_ENV_IS_IN_EEPROM)
-#define CFG_ENV_SIZE			(2 * 1024)
-#define CFG_ENV_OFFSET			(CFG_ENV_EEPROM_SIZE - (8 * 1024))
+#if defined(CONFIG_ENV_IS_IN_EEPROM)
+#define CONFIG_ENV_SIZE			(2 * 1024)
+#define CONFIG_ENV_OFFSET			(CONFIG_ENV_EEPROM_SIZE - (8 * 1024))
 #else
-#define CFG_ENV_SIZE			0x1000
-#define CFG_ENV_SECT_SIZE		CFG_FLASH_SECT_SIZE
+#define CONFIG_ENV_SIZE			0x1000
+#define CONFIG_ENV_SECT_SIZE		CONFIG_SYS_FLASH_SECT_SIZE
 
 /*
  * This ultimately gets passed right into the linker script, so we have to
  * use a number :(
  */
-#define CFG_ENV_OFFSET			0x060000
+#define CONFIG_ENV_OFFSET			0x060000
 #endif
 
 /*
  * Reserve memory for malloc()
  */
-#define	CFG_MALLOC_LEN		(128 * 1024)
+#define	CONFIG_SYS_MALLOC_LEN		(128 * 1024)
 
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define	CFG_BOOTMAPSZ		(8 * 1024 * 1024)
+#define	CONFIG_SYS_BOOTMAPSZ		(8 * 1024 * 1024)
 
 /*
  * Cache Configuration
  */
-#define CFG_CACHELINE_SIZE		16	/* For all MPC8xx CPUs				*/
+#define CONFIG_SYS_CACHELINE_SIZE		16	/* For all MPC8xx CPUs				*/
 #if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT		4	/* log base 2 of above value		*/
+#define CONFIG_SYS_CACHELINE_SHIFT		4	/* log base 2 of above value		*/
 #endif
 
 /*------------------------------------------------------------------------
@@ -479,7 +479,7 @@
  * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze
  */
 #if defined(CONFIG_WATCHDOG)
-#define CFG_SYPCR	( SYPCR_SWTC	| \
+#define CONFIG_SYS_SYPCR	( SYPCR_SWTC	| \
 					  SYPCR_BMT	| \
 					  SYPCR_BME	| \
 					  SYPCR_SWF	| \
@@ -488,7 +488,7 @@
 					  SYPCR_SWP		  \
 					)
 #else
-#define CFG_SYPCR	( SYPCR_SWTC	| \
+#define CONFIG_SYS_SYPCR	( SYPCR_SWTC	| \
 					  SYPCR_BMT	| \
 					  SYPCR_BME	| \
 					  SYPCR_SWF	| \
@@ -501,7 +501,7 @@
  *-----------------------------------------------------------------------
  * Set debug pin mux, enable SPKROUT and GPLB5*.
  */
-#define CFG_SIUMCR	( SIUMCR_DBGC11 | \
+#define CONFIG_SYS_SIUMCR	( SIUMCR_DBGC11 | \
 					  SIUMCR_DBPC11 | \
 					  SIUMCR_MLRC11	| \
 					  SIUMCR_GB5E	  \
@@ -512,7 +512,7 @@
  *-----------------------------------------------------------------------
  * Clear Reference Interrupt Status, Timebase freeze enabled
  */
-#define CFG_TBSCR	( TBSCR_REFA | \
+#define CONFIG_SYS_TBSCR	( TBSCR_REFA | \
 					  TBSCR_REFB | \
 					  TBSCR_TBF	   \
 					)
@@ -521,7 +521,7 @@
  * RTCSC - Real-Time Clock Status and Control Register			UM 11-27
  *-----------------------------------------------------------------------
  */
-#define CFG_RTCSC	( RTCSC_SEC	| \
+#define CONFIG_SYS_RTCSC	( RTCSC_SEC	| \
 					  RTCSC_ALR | \
 					  RTCSC_RTF | \
 					  RTCSC_RTE	  \
@@ -532,7 +532,7 @@
  *-----------------------------------------------------------------------
  * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
  */
-#define CFG_PISCR	( PISCR_PS		| \
+#define CONFIG_SYS_PISCR	( PISCR_PS		| \
 					  PISCR_PITF	  \
 					)
 
@@ -542,7 +542,7 @@
  * Reset PLL lock status sticky bit, timer expired status bit and timer
  * interrupt status bit. Set MF for 1:2:1 mode.
  */
-#define CFG_PLPRCR	( ((0x1 << PLPRCR_MF_SHIFT) & PLPRCR_MF_MSK)	| \
+#define CONFIG_SYS_PLPRCR	( ((0x1 << PLPRCR_MF_SHIFT) & PLPRCR_MF_MSK)	| \
 					  PLPRCR_SPLSS	| \
 					  PLPRCR_TEXPS	| \
 					  PLPRCR_TMIST	  \
@@ -557,7 +557,7 @@
 #define SCCR_MASK   SCCR_EBDF11
 
 #if !defined(CONFIG_SC)
-#define CFG_SCCR	( SCCR_TBS			|	/* timebase = GCLK/2	*/ \
+#define CONFIG_SYS_SCCR	( SCCR_TBS			|	/* timebase = GCLK/2	*/ \
 					  SCCR_COM00		|	/* full strength CLKOUT	*/ \
 					  SCCR_DFSYNC00	|	/* SYNCLK / 1 (normal)	*/ \
 					  SCCR_DFBRG00		|	/* BRGCLK / 1 (normal)	*/ \
@@ -565,7 +565,7 @@
 					  SCCR_DFNH000		  \
 					)
 #else
-#define CFG_SCCR	( SCCR_TBS			|	/* timebase = GCLK/2	*/ \
+#define CONFIG_SYS_SCCR	( SCCR_TBS			|	/* timebase = GCLK/2	*/ \
 					  SCCR_COM00		|	/* full strength CLKOUT	*/ \
 					  SCCR_DFSYNC00	|	/* SYNCLK / 1 (normal)	*/ \
 					  SCCR_DFBRG00		|	/* BRGCLK / 1 (normal)	*/ \
@@ -581,7 +581,7 @@
  *-----------------------------------------------------------------------
  * Mask all events that can cause entry into debug mode
  */
-#define CFG_DER				0
+#define CONFIG_SYS_DER				0
 
 /*
  * Initialize Memory Controller:
@@ -593,13 +593,13 @@
 /*
  * Flash address mask
  */
-#define CFG_PRELIM_OR_AM	0xfe000000
+#define CONFIG_SYS_PRELIM_OR_AM	0xfe000000
 
 /*
  * FLASH timing:
  * 33 Mhz bus with ACS = 11, TRLX = 1, CSNT = 1, SCY = 3, EHTR = 1
  */
-#define CFG_OR_TIMING_FLASH	( OR_CSNT_SAM	| \
+#define CONFIG_SYS_OR_TIMING_FLASH	( OR_CSNT_SAM	| \
 							  OR_ACS_DIV2	| \
 							  OR_BI			| \
 							  OR_SCY_2_CLK	| \
@@ -607,11 +607,11 @@
 							  OR_EHTR		  \
 							)
 
-#define CFG_OR0_PRELIM	( CFG_PRELIM_OR_AM		| \
-						  CFG_OR_TIMING_FLASH	  \
+#define CONFIG_SYS_OR0_PRELIM	( CONFIG_SYS_PRELIM_OR_AM		| \
+						  CONFIG_SYS_OR_TIMING_FLASH	  \
 						)
 
-#define CFG_BR0_PRELIM	( (FLASH_BASE0_PRELIM & BR_BA_MSK)	| \
+#define CONFIG_SYS_BR0_PRELIM	( (FLASH_BASE0_PRELIM & BR_BA_MSK)	| \
 						  BR_MS_GPCM						| \
 						  BR_PS_8							| \
 						  BR_V								  \
@@ -620,12 +620,12 @@
 /*
  * SDRAM configuration
  */
-#define CFG_OR1_AM	0xfc000000
-#define CFG_OR1		( (CFG_OR1_AM & OR_AM_MSK)	| \
+#define CONFIG_SYS_OR1_AM	0xfc000000
+#define CONFIG_SYS_OR1		( (CONFIG_SYS_OR1_AM & OR_AM_MSK)	| \
 					  OR_CSNT_SAM				  \
 					)
 
-#define CFG_BR1		( (SDRAM_BASE & BR_BA_MSK)	| \
+#define CONFIG_SYS_BR1		( (SDRAM_BASE & BR_BA_MSK)	| \
 					  BR_MS_UPMA				| \
 					  BR_PS_32					| \
 					  BR_V						  \
@@ -635,17 +635,17 @@
  * Refresh rate 7.8 us (= 64 ms / 8K = 31.2 uS quad bursts) for one bank
  * of 256 MBit SDRAM
  */
-#define CFG_MPTPR_1BK_8K	MPTPR_PTP_DIV16
+#define CONFIG_SYS_MPTPR_1BK_8K	MPTPR_PTP_DIV16
 
 /*
  * Periodic timer for refresh @ 33 MHz system clock
  */
-#define CFG_MAMR_PTA	64
+#define CONFIG_SYS_MAMR_PTA	64
 
 /*
  * MAMR settings for SDRAM
  */
-#define CFG_MAMR_8COL	( (CFG_MAMR_PTA << MAMR_PTA_SHIFT)	| \
+#define CONFIG_SYS_MAMR_8COL	( (CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT)	| \
 						  MAMR_PTAE				| \
 						  MAMR_AMA_TYPE_1			| \
 						  MAMR_DSA_1_CYCL			| \
@@ -660,7 +660,7 @@
  * 33 MHz bus with TRLX=1, ACS=11, CSNT=1, EBDF=1, SCY=2, EHTR=1,
  * no burst.
  */
-#define CFG_OR2_PRELIM	( (0xffff0000 & OR_AM_MSK)	| \
+#define CONFIG_SYS_OR2_PRELIM	( (0xffff0000 & OR_AM_MSK)	| \
 						  OR_CSNT_SAM				| \
 						  OR_ACS_DIV2				| \
 						  OR_BI						| \
@@ -669,7 +669,7 @@
 						  OR_EHTR					  \
 						)
 
-#define CFG_BR2_PRELIM	( (DOC_BASE & BR_BA_MSK)	| \
+#define CONFIG_SYS_BR2_PRELIM	( (DOC_BASE & BR_BA_MSK)	| \
 						  BR_PS_8					| \
 						  BR_MS_GPCM				| \
 						  BR_V						  \
@@ -683,12 +683,12 @@
  * the cycle will still complete even if there is a configuration
  * error that prevents TA from asserting on FPGA accesss.
  */
-#define CFG_OR3_PRELIM	( (0xfc000000 & OR_AM_MSK)  | \
+#define CONFIG_SYS_OR3_PRELIM	( (0xfc000000 & OR_AM_MSK)  | \
 						  OR_SCY_15_CLK				| \
 						  OR_BI					  \
 						)
 
-#define CFG_BR3_PRELIM	( (FPGA_BASE & BR_BA_MSK)	| \
+#define CONFIG_SYS_BR3_PRELIM	( (FPGA_BASE & BR_BA_MSK)	| \
 						  BR_PS_32					| \
 						  BR_MS_GPCM				| \
 						  BR_V						  \
@@ -698,12 +698,12 @@
  * 33 MHz bus, UPMB, no burst. Do not assert GPLB5 on falling edge
  * of GCLK1_50
  */
-#define CFG_OR4_PRELIM	( (0xffff0000 & OR_AM_MSK)	| \
+#define CONFIG_SYS_OR4_PRELIM	( (0xffff0000 & OR_AM_MSK)	| \
 						  OR_G5LS						| \
 						  OR_BI							  \
 						)
 
-#define CFG_BR4_PRELIM	( (SELECTMAP_BASE & BR_BA_MSK)	| \
+#define CONFIG_SYS_BR4_PRELIM	( (SELECTMAP_BASE & BR_BA_MSK)	| \
 						  BR_PS_8						| \
 						  BR_MS_UPMB					| \
 						  BR_V							  \
@@ -717,7 +717,7 @@
  * the cycle will still complete even if there is a configuration
  * error that prevents TA from asserting on FPGA accesss.
  */
-#define CFG_OR5_PRELIM	( (0xffff0000 & OR_AM_MSK)  | \
+#define CONFIG_SYS_OR5_PRELIM	( (0xffff0000 & OR_AM_MSK)  | \
 						  OR_SCY_15_CLK				| \
 						  OR_EHTR					| \
 						  OR_TRLX					| \
@@ -725,7 +725,7 @@
 						  OR_BI						  \
 						)
 
-#define CFG_BR5_PRELIM	( (M1553_BASE & BR_BA_MSK)	| \
+#define CONFIG_SYS_BR5_PRELIM	( (M1553_BASE & BR_BA_MSK)	| \
 						  BR_PS_16					| \
 						  BR_MS_GPCM				| \
 						  BR_V						  \
@@ -741,10 +741,10 @@
  * Disk On Chip (millenium) configuration
  */
 #if !defined(CONFIG_SC)
-#define CFG_MAX_DOC_DEVICE	1
-#undef	CFG_DOC_SUPPORT_2000
-#define CFG_DOC_SUPPORT_MILLENNIUM
-#undef	CFG_DOC_PASSIVE_PROBE
+#define CONFIG_SYS_MAX_DOC_DEVICE	1
+#undef	CONFIG_SYS_DOC_SUPPORT_2000
+#define CONFIG_SYS_DOC_SUPPORT_MILLENNIUM
+#undef	CONFIG_SYS_DOC_PASSIVE_PROBE
 #endif
 
 /*
diff --git a/include/configs/GENIETV.h b/include/configs/GENIETV.h
index f6d6ae0ce..fadd83027 100644
--- a/include/configs/GENIETV.h
+++ b/include/configs/GENIETV.h
@@ -41,19 +41,19 @@
 #define	CONFIG_ETHADDR		08:00:22:50:70:63	/* Ethernet address */
 #define CONFIG_ENV_OVERWRITE	1	/* Overwrite the environment */
 
-#define CFG_ALLOC_DPRAM			/* Use dynamic DPRAM allocation */
+#define CONFIG_SYS_ALLOC_DPRAM			/* Use dynamic DPRAM allocation */
 
-#define CFG_AUTOLOAD		"n"	/* No autoload */
+#define CONFIG_SYS_AUTOLOAD		"n"	/* No autoload */
 
 /*#define CONFIG_VIDEO		1	/  To enable the video initialization */
 /*#define CONFIG_VIDEO_ADDR	0x00200000 */
 /*#define CONFIG_HARD_I2C	1	/  I2C with hardware support */
 /*#define CONFIG_PCMCIA		1	/  To enable the PCMCIA initialization */
 
-/*#define CFG_PCMCIA_IO_ADDR	0xff020000 */
-/*#define CFG_PCMCIA_IO_SIZE	0x10000 */
-/*#define CFG_PCMCIA_MEM_ADDR	0xe0000000 */
-/*#define CFG_PCMCIA_MEM_SIZE	0x10000 */
+/*#define CONFIG_SYS_PCMCIA_IO_ADDR	0xff020000 */
+/*#define CONFIG_SYS_PCMCIA_IO_SIZE	0x10000 */
+/*#define CONFIG_SYS_PCMCIA_MEM_ADDR	0xe0000000 */
+/*#define CONFIG_SYS_PCMCIA_MEM_SIZE	0x10000 */
 
 /* Video related */
 
@@ -84,7 +84,7 @@
 #define MPC8XX_XIN	5000000			/* 4 MHz clock		*/
 
 #define MPC8XX_HZ	((MPC8XX_XIN) * (MPC8XX_FACT))
-#define CFG_PLPRCR_MF	((MPC8XX_FACT-1) << 20)
+#define CONFIG_SYS_PLPRCR_MF	((MPC8XX_FACT-1) << 20)
 #define CONFIG_8xx_GCLK_FREQ	MPC8XX_HZ	/* Force it - dont measure it */
 
 #define	CONFIG_CLOCKS_IN_MHZ	1	/* clocks passsed to Linux in MHz */
@@ -124,25 +124,25 @@
 /*
  * Miscellaneous configurable options
  */
-#define	CFG_LONGHELP				/* undef to save memory		*/
-#define	CFG_PROMPT		":>"		/* Monitor Command Prompt	*/
+#define	CONFIG_SYS_LONGHELP				/* undef to save memory		*/
+#define	CONFIG_SYS_PROMPT		":>"		/* Monitor Command Prompt	*/
 #if defined(CONFIG_CMD_KGDB)
-#define CFG_CBSIZE		1024		/* Console I/O Buffer Size	*/
+#define CONFIG_SYS_CBSIZE		1024		/* Console I/O Buffer Size	*/
 #else
-#define	CFG_CBSIZE		256		/* Console I/O Buffer Size	*/
+#define	CONFIG_SYS_CBSIZE		256		/* Console I/O Buffer Size	*/
 #endif
-#define	CFG_PBSIZE		(CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define	CFG_MAXARGS		8		/* max number of command args	*/
-#define CFG_BARGSIZE		CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+#define	CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define	CONFIG_SYS_MAXARGS		8		/* max number of command args	*/
+#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
 
-#define CFG_MEMTEST_START	0x00004000	/* memtest works on	*/
-#define CFG_MEMTEST_END		0x00800000	/* 0 ... 8 MB in DRAM	*/
+#define CONFIG_SYS_MEMTEST_START	0x00004000	/* memtest works on	*/
+#define CONFIG_SYS_MEMTEST_END		0x00800000	/* 0 ... 8 MB in DRAM	*/
 
-#define CFG_LOAD_ADDR		0x00100000	/* default load address */
+#define CONFIG_SYS_LOAD_ADDR		0x00100000	/* default load address */
 
-#define	CFG_HZ		1000		/* decrementer freq: 1 ms ticks	*/
+#define	CONFIG_SYS_HZ		1000		/* decrementer freq: 1 ms ticks	*/
 
-#define CFG_BAUDRATE_TABLE	{ 4800, 9600, 19200, 38400, 57600, 115200 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 4800, 9600, 19200, 38400, 57600, 115200 }
 
 /*
  * Low Level Configuration Settings
@@ -152,62 +152,62 @@
 /*-----------------------------------------------------------------------
  * Internal Memory Mapped Register
  */
-#define CFG_IMMR		0xFF000000
-#define CFG_IMMR_SIZE		((uint)(64 * 1024))
+#define CONFIG_SYS_IMMR		0xFF000000
+#define CONFIG_SYS_IMMR_SIZE		((uint)(64 * 1024))
 
 /*-----------------------------------------------------------------------
  * Definitions for initial stack pointer and data area (in DPRAM)
  */
-#define CFG_INIT_RAM_ADDR	CFG_IMMR
-#define	CFG_INIT_RAM_END	0x2F00	/* End of used area in DPRAM	*/
-#define	CFG_GBL_DATA_SIZE	64  /* size in bytes reserved for initial data */
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define	CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_IMMR
+#define	CONFIG_SYS_INIT_RAM_END	0x2F00	/* End of used area in DPRAM	*/
+#define	CONFIG_SYS_GBL_DATA_SIZE	64  /* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define	CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
 /*-----------------------------------------------------------------------
  * Start addresses for the final memory configuration
  * (Set up by the startup code)
- * Please note that CFG_SDRAM_BASE _must_ start at 0
+ * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
  * Also NOTE that it doesn't mean SDRAM - it means MEMORY.
  */
-#define	CFG_SDRAM_BASE		0x00000000
-#define CFG_FLASH_BASE		0x02800000
-#define CFG_FLASH_SIZE		((uint)(8 * 1024 * 1024))	/* max 8Mbyte */
+#define	CONFIG_SYS_SDRAM_BASE		0x00000000
+#define CONFIG_SYS_FLASH_BASE		0x02800000
+#define CONFIG_SYS_FLASH_SIZE		((uint)(8 * 1024 * 1024))	/* max 8Mbyte */
 #if 0
-#define	CFG_MONITOR_LEN		(256 << 10)	/* Reserve 128 kB for Monitor	*/
+#define	CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 128 kB for Monitor	*/
 #else
-#define	CFG_MONITOR_LEN		(512 << 10)	/* Reserve 512 kB for Monitor	*/
+#define	CONFIG_SYS_MONITOR_LEN		(512 << 10)	/* Reserve 512 kB for Monitor	*/
 #endif
-#define CFG_MONITOR_BASE	CFG_FLASH_BASE
-#define	CFG_MALLOC_LEN		(256 << 10)	/* Reserve 128 kB for malloc()	*/
+#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_FLASH_BASE
+#define	CONFIG_SYS_MALLOC_LEN		(256 << 10)	/* Reserve 128 kB for malloc()	*/
 
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define	CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux	*/
+#define	CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux	*/
 /*-----------------------------------------------------------------------
  * FLASH organization
  */
-#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
-#define CFG_MAX_FLASH_SECT	8	/* max number of sectors on one chip	*/
+#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
+#define CONFIG_SYS_MAX_FLASH_SECT	8	/* max number of sectors on one chip	*/
 
-#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
-#define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
+#define CONFIG_SYS_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
+#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
 
-#define	CFG_ENV_IS_IN_FLASH	1
-#define CFG_ENV_OFFSET		0x10000	/* Offset of Environment Sector		*/
-#define	CFG_ENV_SIZE		0x10000	/* Total Size of Environment Sector (64k)*/
+#define	CONFIG_ENV_IS_IN_FLASH	1
+#define CONFIG_ENV_OFFSET		0x10000	/* Offset of Environment Sector		*/
+#define	CONFIG_ENV_SIZE		0x10000	/* Total Size of Environment Sector (64k)*/
 
 /* values according to the manual */
 
 /*-----------------------------------------------------------------------
  * Cache Configuration
  */
-#define CFG_CACHELINE_SIZE	16	/* For all MPC8xx CPUs			*/
+#define CONFIG_SYS_CACHELINE_SIZE	16	/* For all MPC8xx CPUs			*/
 #if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT	4	/* log base 2 of the above value	*/
+#define CONFIG_SYS_CACHELINE_SHIFT	4	/* log base 2 of the above value	*/
 #endif
 
 /*-----------------------------------------------------------------------
@@ -217,10 +217,10 @@
  * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze
  */
 #if defined(CONFIG_WATCHDOG)
-#define CFG_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
+#define CONFIG_SYS_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
 			 SYPCR_SWE  | SYPCR_SWRI| SYPCR_SWP)
 #else
-#define CFG_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
+#define CONFIG_SYS_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
 #endif
 
 /*-----------------------------------------------------------------------
@@ -228,23 +228,23 @@
  *-----------------------------------------------------------------------
  * PCMCIA config., multi-function pin tri-state
  *
-#define CFG_SIUMCR	(SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_MLRC01)
+#define CONFIG_SYS_SIUMCR	(SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_MLRC01)
  */
-#define CFG_SIUMCR	(SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_MLRC10)
+#define CONFIG_SYS_SIUMCR	(SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_MLRC10)
 
 /*-----------------------------------------------------------------------
  * TBSCR - Time Base Status and Control					11-26
  *-----------------------------------------------------------------------
  * Clear Reference Interrupt Status, Timebase freezing enabled
  */
-#define CFG_TBSCR	(TBSCR_REFA | TBSCR_REFB | TBSCR_TBE)
+#define CONFIG_SYS_TBSCR	(TBSCR_REFA | TBSCR_REFB | TBSCR_TBE)
 
 /*-----------------------------------------------------------------------
  * PISCR - Periodic Interrupt Status and Control		11-31
  *-----------------------------------------------------------------------
  * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
  */
-#define CFG_PISCR	(PISCR_PS | PISCR_PITF)
+#define CONFIG_SYS_PISCR	(PISCR_PS | PISCR_PITF)
 
 /*-----------------------------------------------------------------------
  * PLPRCR - PLL, Low-Power, and Reset Control Register	15-30
@@ -252,9 +252,9 @@
  * Reset PLL lock status sticky bit, timer expired status bit and timer  *
  * interrupt status bit - leave PLL multiplication factor unchanged !
  *
- * #define CFG_PLPRCR	(PLPRCR_SPLSS | PLPRCR_TEXPS | PLPRCR_TMIST)
+ * #define CONFIG_SYS_PLPRCR	(PLPRCR_SPLSS | PLPRCR_TEXPS | PLPRCR_TMIST)
  */
-#define CFG_PLPRCR	(PLPRCR_SPLSS | PLPRCR_TEXPS | PLPRCR_TMIST | CFG_PLPRCR_MF)
+#define CONFIG_SYS_PLPRCR	(PLPRCR_SPLSS | PLPRCR_TEXPS | PLPRCR_TMIST | CONFIG_SYS_PLPRCR_MF)
 
 /*-----------------------------------------------------------------------
  * SCCR - System Clock and reset Control Register		15-27
@@ -263,7 +263,7 @@
  * power management and some other internal clocks
  */
 #define SCCR_MASK	SCCR_EBDF11
-#define CFG_SCCR       (SCCR_TBS     | \
+#define CONFIG_SYS_SCCR       (SCCR_TBS     | \
 				SCCR_COM00   | SCCR_DFSYNC00 | SCCR_DFBRG00  | \
 				SCCR_DFNL000 | SCCR_DFNH000  | SCCR_DFLCD000 | \
 				SCCR_DFALCD00)
@@ -273,7 +273,7 @@
  *-----------------------------------------------------------------------
  *
  */
-#define CFG_DER		0
+#define CONFIG_SYS_DER		0
 
 /* Because of the way the 860 starts up and assigns CS0 the
 * entire address space, we have to set the memory controller
@@ -291,22 +291,22 @@
 
 #define FLASH_BASE0_PRELIM	0x02800000	/* FLASH bank #0		*/
 
-#define CFG_REMAP_OR_AM		0x80000000	/* OR addr mask		*/
-#define CFG_PRELIM_OR_AM	0xFF800000	/* OR addr mask (512Kb) */
+#define CONFIG_SYS_REMAP_OR_AM		0x80000000	/* OR addr mask		*/
+#define CONFIG_SYS_PRELIM_OR_AM	0xFF800000	/* OR addr mask (512Kb) */
 
 /* FLASH timing */
-#define CFG_OR_TIMING_FLASH	(OR_CSNT_SAM  | OR_ACS_DIV2 | OR_BI | \
+#define CONFIG_SYS_OR_TIMING_FLASH	(OR_CSNT_SAM  | OR_ACS_DIV2 | OR_BI | \
 				OR_SCY_15_CLK | OR_TRLX )
 
-/*#define CFG_OR0_REMAP	(CFG_REMAP_OR_AM  | CFG_OR_TIMING_FLASH) */
-#define CFG_OR0_PRELIM	(CFG_PRELIM_OR_AM | CFG_OR_TIMING_FLASH)		/* 0xfff80ff4 */
-#define CFG_BR0_PRELIM	((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_V | BR_PS_8)	/* 0x02800401 */
+/*#define CONFIG_SYS_OR0_REMAP	(CONFIG_SYS_REMAP_OR_AM  | CONFIG_SYS_OR_TIMING_FLASH) */
+#define CONFIG_SYS_OR0_PRELIM	(CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_FLASH)		/* 0xfff80ff4 */
+#define CONFIG_SYS_BR0_PRELIM	((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_V | BR_PS_8)	/* 0x02800401 */
 
 /*
  * BR1/2 and OR1/2 (SDRAM)
 */
 
-#define CFG_OR_TIMING_SDRAM	0x00000A00
+#define CONFIG_SYS_OR_TIMING_SDRAM	0x00000A00
 
 #define SDRAM_MAX_SIZE		0x04000000	/* 64Mb bank */
 #define SDRAM_BASE1_PRELIM	0x00000000	/* First bank */
@@ -317,17 +317,17 @@
  */
 
 /* periodic timer for refresh */
-#define CFG_MBMR_PTB		0x5d		/* start with divider for 100 MHz	*/
+#define CONFIG_SYS_MBMR_PTB		0x5d		/* start with divider for 100 MHz	*/
 
 /* refresh rate 15.6 us (= 64 ms / 4K = 62.4 / quad bursts) for <= 128 MBit	*/
-#define CFG_MPTPR_2BK_4K	MPTPR_PTP_DIV16		/* setting for 2 banks	*/
-#define CFG_MPTPR_1BK_4K        MPTPR_PTP_DIV32
+#define CONFIG_SYS_MPTPR_2BK_4K	MPTPR_PTP_DIV16		/* setting for 2 banks	*/
+#define CONFIG_SYS_MPTPR_1BK_4K        MPTPR_PTP_DIV32
 /*
  * MBMR settings for SDRAM
  */
 
 /* 8 column SDRAM */
-#define CFG_MBMR_8COL	((CFG_MBMR_PTB << MAMR_PTA_SHIFT)  | MAMR_PTAE | \
+#define CONFIG_SYS_MBMR_8COL	((CONFIG_SYS_MBMR_PTB << MAMR_PTA_SHIFT)  | MAMR_PTAE | \
 			MAMR_G0CLA_A11 | MAMR_RLFA_1X | MAMR_WLFA_1X \
 			| MAMR_TLFA_4X)	/* 0x5d802114 */
 
diff --git a/include/configs/GTH.h b/include/configs/GTH.h
index 461670a10..c2cf852d1 100644
--- a/include/configs/GTH.h
+++ b/include/configs/GTH.h
@@ -88,11 +88,11 @@
 #if 1
 #define	CONFIG_SCC1_ENET	1	/* use SCC1 ethernet */
 #undef	CONFIG_FEC_ENET			/* disable FEC ethernet  */
-#define CFG_DISCOVER_PHY
+#define CONFIG_SYS_DISCOVER_PHY
 #else
 #undef	CONFIG_SCC1_ENET		/* disable SCC1 ethernet */
 #define	CONFIG_FEC_ENET		1	/* use FEC ethernet  */
-#define CFG_DISCOVER_PHY
+#define CONFIG_SYS_DISCOVER_PHY
 #endif
 #if defined(CONFIG_SCC1_ENET) && defined(CONFIG_FEC_ENET)
 #error Both CONFIG_SCC1_ENET and CONFIG_FEC_ENET configured
@@ -122,25 +122,25 @@
 /*
  * Miscellaneous configurable options
  */
-#define	CFG_PROMPT		"=>"	/* Monitor Command Prompt	*/
+#define	CONFIG_SYS_PROMPT		"=>"	/* Monitor Command Prompt	*/
 #if defined(CONFIG_CMD_KGDB)
-#define	CFG_CBSIZE	1024		/* Console I/O Buffer Size	*/
+#define	CONFIG_SYS_CBSIZE	1024		/* Console I/O Buffer Size	*/
 #else
-#define	CFG_CBSIZE	256		/* Console I/O Buffer Size	*/
+#define	CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size	*/
 #endif
-#define	CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define	CFG_MAXARGS	16		/* max number of command args	*/
-#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+#define	CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define	CONFIG_SYS_MAXARGS	16		/* max number of command args	*/
+#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
 
-#define CFG_MEMTEST_START	0x0100000	/* memtest works on	*/
-#define CFG_MEMTEST_END		0x0400000	/* 1 ... 4 MB in DRAM	*/
+#define CONFIG_SYS_MEMTEST_START	0x0100000	/* memtest works on	*/
+#define CONFIG_SYS_MEMTEST_END		0x0400000	/* 1 ... 4 MB in DRAM	*/
 
 /* Default location to load data from net */
-#define CFG_LOAD_ADDR		0x100000
+#define CONFIG_SYS_LOAD_ADDR		0x100000
 
-#define	CFG_HZ		1000		/* decrementer freq: 1 ms ticks	*/
+#define	CONFIG_SYS_HZ		1000		/* decrementer freq: 1 ms ticks	*/
 
-#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400 }
 
 /*
  * Low Level Configuration Settings
@@ -150,63 +150,63 @@
 /*-----------------------------------------------------------------------
  * Internal Memory Mapped Register
  */
-#define CFG_IMMR			0xFF000000
-#define CFG_IMMR_SIZE		((uint)(64 * 1024))
+#define CONFIG_SYS_IMMR			0xFF000000
+#define CONFIG_SYS_IMMR_SIZE		((uint)(64 * 1024))
 
 /*-----------------------------------------------------------------------
  * Definitions for initial stack pointer and data area (in DPRAM)
  */
-#define CFG_INIT_RAM_ADDR	CFG_IMMR
-#define	CFG_INIT_RAM_END	0x2F00	/* End of used area in DPRAM	*/
-#define	CFG_GBL_DATA_SIZE	64  /* size in bytes reserved for initial data */
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define	CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_IMMR
+#define	CONFIG_SYS_INIT_RAM_END	0x2F00	/* End of used area in DPRAM	*/
+#define	CONFIG_SYS_GBL_DATA_SIZE	64  /* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define	CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
 /*-----------------------------------------------------------------------
  * Start addresses for the final memory configuration
  * (Set up by the startup code)
- * Please note that CFG_SDRAM_BASE _must_ start at 0
+ * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
  */
-#define	CFG_SDRAM_BASE		0x00000000
+#define	CONFIG_SYS_SDRAM_BASE		0x00000000
 
-#define CFG_FLASH_BASE		0x80000000
+#define CONFIG_SYS_FLASH_BASE		0x80000000
 
-#define CFG_FLASH_SIZE		((uint)(8 * 1024 * 1024))	/* max 8Mbyte */
+#define CONFIG_SYS_FLASH_SIZE		((uint)(8 * 1024 * 1024))	/* max 8Mbyte */
 
-#define	CFG_MONITOR_LEN		(384 << 10)	/* Reserve 384 kB for Monitor	*/
+#define	CONFIG_SYS_MONITOR_LEN		(384 << 10)	/* Reserve 384 kB for Monitor	*/
 
-#define CFG_MONITOR_BASE TEXT_BASE
+#define CONFIG_SYS_MONITOR_BASE TEXT_BASE
 
-#define	CFG_MALLOC_LEN		(384 << 10)	/* Reserve 384 kB for malloc()	*/
+#define	CONFIG_SYS_MALLOC_LEN		(384 << 10)	/* Reserve 384 kB for malloc()	*/
 
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define	CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux	*/
+#define	CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux	*/
 /*-----------------------------------------------------------------------
  * FLASH organization
  */
-#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
-#define CFG_MAX_FLASH_SECT	8	/* max number of sectors on one chip	*/
+#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
+#define CONFIG_SYS_MAX_FLASH_SECT	8	/* max number of sectors on one chip	*/
 
-#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
-#define CFG_FLASH_WRITE_TOUT	500		/* Timeout for Flash Write (in ms)	*/
+#define CONFIG_SYS_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
+#define CONFIG_SYS_FLASH_WRITE_TOUT	500		/* Timeout for Flash Write (in ms)	*/
 
-#define	CFG_ENV_IS_IN_FLASH 1
-#undef CFG_ENV_IS_IN_EEPROM
-#define CFG_ENV_OFFSET		0x000E0000
-#define	CFG_ENV_SIZE		0x4000	/* Total Size of Environment Sector	*/
+#define	CONFIG_ENV_IS_IN_FLASH 1
+#undef CONFIG_ENV_IS_IN_EEPROM
+#define CONFIG_ENV_OFFSET		0x000E0000
+#define	CONFIG_ENV_SIZE		0x4000	/* Total Size of Environment Sector	*/
 
-#define CFG_ENV_SECT_SIZE	0x50000	/* see README - env sector total size	*/
+#define CONFIG_ENV_SECT_SIZE	0x50000	/* see README - env sector total size	*/
 
 /*-----------------------------------------------------------------------
  * Cache Configuration
  */
-#define CFG_CACHELINE_SIZE	16	/* For all MPC8xx CPUs			*/
+#define CONFIG_SYS_CACHELINE_SIZE	16	/* For all MPC8xx CPUs			*/
 #if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT	4	/* log base 2 of the above value	*/
+#define CONFIG_SYS_CACHELINE_SHIFT	4	/* log base 2 of the above value	*/
 #endif
 
 /*-----------------------------------------------------------------------
@@ -216,10 +216,10 @@
  * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze
  */
 #if defined(CONFIG_WATCHDOG)
-#define CFG_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
+#define CONFIG_SYS_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
 			 SYPCR_SWE  | SYPCR_SWRI| SYPCR_SWP)
 #else
-#define CFG_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
+#define CONFIG_SYS_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
 #endif
 
 /*-----------------------------------------------------------------------
@@ -227,14 +227,14 @@
  *-----------------------------------------------------------------------
  * PCMCIA config., multi-function pin tri-state
  */
-#define CFG_SIUMCR	(SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_MLRC01)
+#define CONFIG_SYS_SIUMCR	(SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_MLRC01)
 
 /*-----------------------------------------------------------------------
  * TBSCR - Time Base Status and Control					11-26
  *-----------------------------------------------------------------------
  * Clear Reference Interrupt Status, Timebase freezing enabled
  */
-#define CFG_TBSCR	(TBSCR_REFA | TBSCR_REFB | TBSCR_TBF)
+#define CONFIG_SYS_TBSCR	(TBSCR_REFA | TBSCR_REFB | TBSCR_TBF)
 
 /*----------------------------------------------------------------------
  * RTCSC - Real-Time Clock Status and Control Register		11-27
@@ -242,22 +242,22 @@
  */
 
 /*FIXME dont use for now */
-/*#define CFG_RTCSC	(RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE) */
-/*#define CFG_RTCSC	(RTCSC_RTF) */
+/*#define CONFIG_SYS_RTCSC	(RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE) */
+/*#define CONFIG_SYS_RTCSC	(RTCSC_RTF) */
 
 /*-----------------------------------------------------------------------
  * PISCR - Periodic Interrupt Status and Control		11-31
  *-----------------------------------------------------------------------
  * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
  */
-#define CFG_PISCR	(PISCR_PS | PISCR_PITF)
+#define CONFIG_SYS_PISCR	(PISCR_PS | PISCR_PITF)
 /* PITE */
 /*-----------------------------------------------------------------------
  * PLPRCR - PLL, Low-Power, and Reset Control Register	15-30
  *-----------------------------------------------------------------------
  * set the PLL, the low-power modes and the reset control (15-29)
  */
-#define CFG_PLPRCR	(((MPC8XX_FACT-1) << PLPRCR_MF_SHIFT) |	\
+#define CONFIG_SYS_PLPRCR	(((MPC8XX_FACT-1) << PLPRCR_MF_SHIFT) |	\
 				PLPRCR_SPLSS | PLPRCR_TEXPS | PLPRCR_TMIST)
 
 /*-----------------------------------------------------------------------
@@ -269,14 +269,14 @@
 
 /* FIXME check values */
 #define SCCR_MASK	SCCR_EBDF11
-#define CFG_SCCR	(SCCR_TBS|SCCR_RTSEL|SCCR_COM00|SCCR_DFSYNC00|SCCR_DFBRG00|SCCR_DFNL000|SCCR_DFNH000|SCCR_DFLCD000|SCCR_DFALCD00)
+#define CONFIG_SYS_SCCR	(SCCR_TBS|SCCR_RTSEL|SCCR_COM00|SCCR_DFSYNC00|SCCR_DFBRG00|SCCR_DFNL000|SCCR_DFNH000|SCCR_DFLCD000|SCCR_DFALCD00)
 
  /*-----------------------------------------------------------------------
  *
  *-----------------------------------------------------------------------
  *
  */
-#define CFG_DER		0
+#define CONFIG_SYS_DER		0
 
 /* Because of the way the 860 starts up and assigns CS0 the
 * entire address space, we have to set the memory controller
@@ -293,22 +293,22 @@
  */
 /* the other CS:s are determined by looking at parameters in BCSRx */
 
-#define FLASH_BASE0_PRELIM	CFG_FLASH_BASE	/* FLASH bank #0	*/
+#define FLASH_BASE0_PRELIM	CONFIG_SYS_FLASH_BASE	/* FLASH bank #0	*/
 
-#define CFG_REMAP_OR_AM		0xFF800000	/* 4 MB OR addr mask */
-#define CFG_PRELIM_OR_AM	0xFF800000	/* OR addr mask */
+#define CONFIG_SYS_REMAP_OR_AM		0xFF800000	/* 4 MB OR addr mask */
+#define CONFIG_SYS_PRELIM_OR_AM	0xFF800000	/* OR addr mask */
 
 #define FPGA_2_BASE 0x90000000
 #define FPGA_3_BASE 0x98000000
 
 /* FLASH timing: ACS = 10, TRLX = 1, CSNT = 1, SCY = 3, EHTR = 0	*/
-#define CFG_OR_TIMING_FLASH	(OR_CSNT_SAM  | OR_ACS_DIV4 | OR_BI | OR_SCY_3_CLK | OR_TRLX)
+#define CONFIG_SYS_OR_TIMING_FLASH	(OR_CSNT_SAM  | OR_ACS_DIV4 | OR_BI | OR_SCY_3_CLK | OR_TRLX)
 
-#define CFG_OR0_REMAP	(CFG_REMAP_OR_AM  | CFG_OR_TIMING_FLASH)
+#define CONFIG_SYS_OR0_REMAP	(CONFIG_SYS_REMAP_OR_AM  | CONFIG_SYS_OR_TIMING_FLASH)
 
 
-#define CFG_OR0_PRELIM	(CFG_PRELIM_OR_AM | CFG_OR_TIMING_FLASH)   /* 1 Mbyte until detected and only 1 Mbyte is needed*/
-#define CFG_BR0_PRELIM	((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_V | BR_PS_16 )
+#define CONFIG_SYS_OR0_PRELIM	(CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_FLASH)   /* 1 Mbyte until detected and only 1 Mbyte is needed*/
+#define CONFIG_SYS_BR0_PRELIM	((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_V | BR_PS_16 )
 
 /*
  * Internal Definitions
@@ -341,31 +341,31 @@
 #define CONFIG_PCMCIA_SLOT_A 1
 #endif
 
-#define CFG_PCMCIA_MEM_ADDR	(0xE0000000)
-#define CFG_PCMCIA_MEM_SIZE	( 64 << 20 )
-#define CFG_PCMCIA_DMA_ADDR	(0xE4000000)
-#define CFG_PCMCIA_DMA_SIZE	( 64 << 20 )
-#define CFG_PCMCIA_ATTRB_ADDR	(0xE8000000)
-#define CFG_PCMCIA_ATTRB_SIZE	( 64 << 20 )
-#define CFG_PCMCIA_IO_ADDR	(0xEC000000)
-#define CFG_PCMCIA_IO_SIZE	( 64 << 20 )
+#define CONFIG_SYS_PCMCIA_MEM_ADDR	(0xE0000000)
+#define CONFIG_SYS_PCMCIA_MEM_SIZE	( 64 << 20 )
+#define CONFIG_SYS_PCMCIA_DMA_ADDR	(0xE4000000)
+#define CONFIG_SYS_PCMCIA_DMA_SIZE	( 64 << 20 )
+#define CONFIG_SYS_PCMCIA_ATTRB_ADDR	(0xE8000000)
+#define CONFIG_SYS_PCMCIA_ATTRB_SIZE	( 64 << 20 )
+#define CONFIG_SYS_PCMCIA_IO_ADDR	(0xEC000000)
+#define CONFIG_SYS_PCMCIA_IO_SIZE	( 64 << 20 )
 
 #define CONFIG_IDE_8xx_PCCARD       1       /* Use IDE with PC Card Adapter */
 #undef  CONFIG_IDE_8xx_DIRECT               /* Direct IDE    not supported  */
 #undef  CONFIG_IDE_LED                  /* LED   for ide not supported  */
 #undef  CONFIG_IDE_RESET                /* reset for ide not supported  */
 
-#define CFG_IDE_MAXBUS          1       /* max. 1 IDE bus               */
-#define CFG_IDE_MAXDEVICE       1       /* max. 1 drive per IDE bus     */
+#define CONFIG_SYS_IDE_MAXBUS          1       /* max. 1 IDE bus               */
+#define CONFIG_SYS_IDE_MAXDEVICE       1       /* max. 1 drive per IDE bus     */
 
-#define CFG_ATA_IDE0_OFFSET     0x0000
-#define CFG_ATA_BASE_ADDR       CFG_PCMCIA_MEM_ADDR
+#define CONFIG_SYS_ATA_IDE0_OFFSET     0x0000
+#define CONFIG_SYS_ATA_BASE_ADDR       CONFIG_SYS_PCMCIA_MEM_ADDR
 /* Offset for data I/O                  */
-#define CFG_ATA_DATA_OFFSET     (CFG_PCMCIA_MEM_SIZE + 0x320)
+#define CONFIG_SYS_ATA_DATA_OFFSET     (CONFIG_SYS_PCMCIA_MEM_SIZE + 0x320)
 /* Offset for normal register accesses  */
-#define CFG_ATA_REG_OFFSET      (2 * CFG_PCMCIA_MEM_SIZE + 0x320)
+#define CONFIG_SYS_ATA_REG_OFFSET      (2 * CONFIG_SYS_PCMCIA_MEM_SIZE + 0x320)
 /* Offset for alternate registers       */
-#define CFG_ATA_ALT_OFFSET      0x0100
+#define CONFIG_SYS_ATA_ALT_OFFSET      0x0100
 
 #define CONFIG_8xx_GCLK_FREQ   MPC8XX_HZ       /* Force it - dont measure it */
 
diff --git a/include/configs/HH405.h b/include/configs/HH405.h
index 9bcbfe3b7..80e59bb26 100644
--- a/include/configs/HH405.h
+++ b/include/configs/HH405.h
@@ -62,8 +62,9 @@
 	"pciconfighost=1\0"						\
 	""
 
-#define CFG_LOADS_BAUD_CHANGE	1	/* allow baudrate change	*/
+#define CONFIG_SYS_LOADS_BAUD_CHANGE	1	/* allow baudrate change	*/
 
+#define CONFIG_PPC4xx_EMAC
 #define CONFIG_NET_MULTI	1
 #undef  CONFIG_HAS_ETH1
 
@@ -93,10 +94,10 @@
 #define CONFIG_CONSOLE_EXTRA_INFO
 #define CONFIG_VIDEO_SW_CURSOR
 #define CONFIG_SPLASH_SCREEN
-#define CFG_CONSOLE_IS_IN_ENV
+#define CONFIG_SYS_CONSOLE_IS_IN_ENV
 #define CONFIG_SPLASH_SCREEN
 #define CONFIG_VIDEO_BMP_GZIP		/* gzip compressed bmp images	*/
-#define CFG_VIDEO_LOGO_MAX_SIZE	(2 << 20)	/* for decompressed img */
+#define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE	(2 << 20)	/* for decompressed img */
 
 #endif /* CONFIG_VIDEO */
 
@@ -149,76 +150,76 @@
 /*
  * Miscellaneous configurable options
  */
-#define CFG_LONGHELP			/* undef to save memory		*/
-#define CFG_PROMPT	"=> "		/* Monitor Command Prompt	*/
+#define CONFIG_SYS_LONGHELP			/* undef to save memory		*/
+#define CONFIG_SYS_PROMPT	"=> "		/* Monitor Command Prompt	*/
 
-#undef	CFG_HUSH_PARSER			/* use "hush" command parser	*/
-#ifdef	CFG_HUSH_PARSER
-#define	CFG_PROMPT_HUSH_PS2	"> "
+#undef	CONFIG_SYS_HUSH_PARSER			/* use "hush" command parser	*/
+#ifdef	CONFIG_SYS_HUSH_PARSER
+#define	CONFIG_SYS_PROMPT_HUSH_PS2	"> "
 #endif
 
 #if defined(CONFIG_CMD_KGDB)
-#define	CFG_CBSIZE	1024		/* Console I/O Buffer Size	*/
+#define	CONFIG_SYS_CBSIZE	1024		/* Console I/O Buffer Size	*/
 #else
-#define	CFG_CBSIZE	256		/* Console I/O Buffer Size	*/
+#define	CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size	*/
 #endif
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define CFG_MAXARGS	16		/* max number of command args	*/
-#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS	16		/* max number of command args	*/
+#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
 
-#define CFG_DEVICE_NULLDEV      1       /* include nulldev device       */
+#define CONFIG_SYS_DEVICE_NULLDEV      1       /* include nulldev device       */
 
-#undef  CFG_CONSOLE_INFO_QUIET          /* print console @ startup	*/
+#undef  CONFIG_SYS_CONSOLE_INFO_QUIET          /* print console @ startup	*/
 
 #define CONFIG_AUTO_COMPLETE	1       /* add autocompletion support   */
 
-#define CFG_MEMTEST_START	0x0400000	/* memtest works on	*/
-#define CFG_MEMTEST_END		0x0C00000	/* 4 ... 12 MB in DRAM	*/
+#define CONFIG_SYS_MEMTEST_START	0x0400000	/* memtest works on	*/
+#define CONFIG_SYS_MEMTEST_END		0x0C00000	/* 4 ... 12 MB in DRAM	*/
 
-#undef  CFG_EXT_SERIAL_CLOCK           /* no external serial clock used */
-#define CFG_IGNORE_405_UART_ERRATA_59   /* ignore ppc405gp errata #59   */
-#define CFG_BASE_BAUD       691200
+#undef  CONFIG_SYS_EXT_SERIAL_CLOCK           /* no external serial clock used */
+#define CONFIG_SYS_IGNORE_405_UART_ERRATA_59   /* ignore ppc405gp errata #59   */
+#define CONFIG_SYS_BASE_BAUD       691200
 #define CONFIG_UART1_CONSOLE            /* define for uart1 as console  */
 
 /* The following table includes the supported baudrates */
-#define CFG_BAUDRATE_TABLE      \
+#define CONFIG_SYS_BAUDRATE_TABLE      \
 	{ 300, 600, 1200, 2400, 4800, 9600, 19200, 38400,     \
 	 57600, 115200, 230400, 460800, 921600 }
 
-#define CFG_LOAD_ADDR	0x100000	/* default load address */
-#define CFG_EXTBDINFO	1		/* To use extended board_into (bd_t) */
+#define CONFIG_SYS_LOAD_ADDR	0x100000	/* default load address */
+#define CONFIG_SYS_EXTBDINFO	1		/* To use extended board_into (bd_t) */
 
-#define	CFG_HZ		1000		/* decrementer freq: 1 ms ticks	*/
+#define	CONFIG_SYS_HZ		1000		/* decrementer freq: 1 ms ticks	*/
 
 #define CONFIG_ZERO_BOOTDELAY_CHECK	/* check for keypress on bootdelay==0 */
 
 #define CONFIG_VERSION_VARIABLE	1       /* include version env variable */
 
-#define CFG_RX_ETH_BUFFER	16      /* use 16 rx buffer on 405 emac */
+#define CONFIG_SYS_RX_ETH_BUFFER	16      /* use 16 rx buffer on 405 emac */
 
 /*-----------------------------------------------------------------------
  * RTC stuff
  *-----------------------------------------------------------------------
  */
 #define CONFIG_RTC_DS1338
-#define CFG_I2C_RTC_ADDR	0x68
+#define CONFIG_SYS_I2C_RTC_ADDR	0x68
 
 /*-----------------------------------------------------------------------
  * NAND-FLASH stuff
  *-----------------------------------------------------------------------
  */
-#define CFG_NAND_BASE_LIST	{ CFG_NAND_BASE }
+#define CONFIG_SYS_NAND_BASE_LIST	{ CONFIG_SYS_NAND_BASE }
 #define NAND_MAX_CHIPS          1
-#define CFG_MAX_NAND_DEVICE	1         /* Max number of NAND devices */
+#define CONFIG_SYS_MAX_NAND_DEVICE	1         /* Max number of NAND devices */
 #define NAND_BIG_DELAY_US	25
 
-#define CFG_NAND_CE             (0x80000000 >> 1)   /* our CE is GPIO1  */
-#define CFG_NAND_RDY            (0x80000000 >> 4)   /* our RDY is GPIO4 */
-#define CFG_NAND_CLE            (0x80000000 >> 2)   /* our CLE is GPIO2 */
-#define CFG_NAND_ALE            (0x80000000 >> 3)   /* our ALE is GPIO3 */
+#define CONFIG_SYS_NAND_CE             (0x80000000 >> 1)   /* our CE is GPIO1  */
+#define CONFIG_SYS_NAND_RDY            (0x80000000 >> 4)   /* our RDY is GPIO4 */
+#define CONFIG_SYS_NAND_CLE            (0x80000000 >> 2)   /* our CLE is GPIO2 */
+#define CONFIG_SYS_NAND_ALE            (0x80000000 >> 3)   /* our ALE is GPIO3 */
 
-#define CFG_NAND_SKIP_BAD_DOT_I 1       /* ".i" read skips bad blocks   */
-#define CFG_NAND_QUIET          1
+#define CONFIG_SYS_NAND_SKIP_BAD_DOT_I 1       /* ".i" read skips bad blocks   */
+#define CONFIG_SYS_NAND_QUIET          1
 
 /*-----------------------------------------------------------------------
  * PCI stuff
@@ -237,15 +238,15 @@
 
 #define CONFIG_PCI_CONFIG_HOST_BRIDGE 1 /* don't skip host bridge config*/
 
-#define CFG_PCI_SUBSYS_VENDORID 0x12FE  /* PCI Vendor ID: esd gmbh      */
-#define CFG_PCI_SUBSYS_DEVICEID 0x0405  /* PCI Device ID: CPCI-405      */
-#define CFG_PCI_CLASSCODE       0x0b20  /* PCI Class Code: Processor/PPC*/
-#define CFG_PCI_PTM1LA  0x00000000      /* point to sdram               */
-#define CFG_PCI_PTM1MS  0xfc000001      /* 64MB, enable hard-wired to 1 */
-#define CFG_PCI_PTM1PCI 0x00000000      /* Host: use this pci address   */
-#define CFG_PCI_PTM2LA  0xffc00000      /* point to flash               */
-#define CFG_PCI_PTM2MS  0xffc00001      /* 4MB, enable                  */
-#define CFG_PCI_PTM2PCI 0x04000000      /* Host: use this pci address   */
+#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x12FE  /* PCI Vendor ID: esd gmbh      */
+#define CONFIG_SYS_PCI_SUBSYS_DEVICEID 0x0405  /* PCI Device ID: CPCI-405      */
+#define CONFIG_SYS_PCI_CLASSCODE       0x0b20  /* PCI Class Code: Processor/PPC*/
+#define CONFIG_SYS_PCI_PTM1LA  0x00000000      /* point to sdram               */
+#define CONFIG_SYS_PCI_PTM1MS  0xfc000001      /* 64MB, enable hard-wired to 1 */
+#define CONFIG_SYS_PCI_PTM1PCI 0x00000000      /* Host: use this pci address   */
+#define CONFIG_SYS_PCI_PTM2LA  0xffc00000      /* point to flash               */
+#define CONFIG_SYS_PCI_PTM2MS  0xffc00001      /* 4MB, enable                  */
+#define CONFIG_SYS_PCI_PTM2PCI 0x04000000      /* Host: use this pci address   */
 
 /*-----------------------------------------------------------------------
  * IDE/ATA stuff
@@ -255,112 +256,111 @@
 #undef  CONFIG_IDE_LED                  /* no led for ide supported     */
 #define CONFIG_IDE_RESET	1	/* reset for ide supported	*/
 
-#define	CFG_IDE_MAXBUS	        1		/* max. 1 IDE busses	*/
-#define	CFG_IDE_MAXDEVICE	(CFG_IDE_MAXBUS*1) /* max. 1 drives per IDE bus */
+#define	CONFIG_SYS_IDE_MAXBUS	        1		/* max. 1 IDE busses	*/
+#define	CONFIG_SYS_IDE_MAXDEVICE	(CONFIG_SYS_IDE_MAXBUS*1) /* max. 1 drives per IDE bus */
 
-#define	CFG_ATA_BASE_ADDR	0xF0100000
-#define	CFG_ATA_IDE0_OFFSET	0x0000
+#define	CONFIG_SYS_ATA_BASE_ADDR	0xF0100000
+#define	CONFIG_SYS_ATA_IDE0_OFFSET	0x0000
 
-#define CFG_ATA_DATA_OFFSET	0x0000	/* Offset for data I/O			*/
-#define	CFG_ATA_REG_OFFSET	0x0000	/* Offset for normal register accesses	*/
-#define CFG_ATA_ALT_OFFSET	0x0000	/* Offset for alternate registers	*/
+#define CONFIG_SYS_ATA_DATA_OFFSET	0x0000	/* Offset for data I/O			*/
+#define	CONFIG_SYS_ATA_REG_OFFSET	0x0000	/* Offset for normal register accesses	*/
+#define CONFIG_SYS_ATA_ALT_OFFSET	0x0000	/* Offset for alternate registers	*/
 
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
+#define CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
 /*-----------------------------------------------------------------------
  * FLASH organization
  */
 #define FLASH_BASE0_PRELIM	0xFFC00000	/* FLASH bank #0	*/
 
-#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
-#define CFG_MAX_FLASH_SECT	256	/* max number of sectors on one chip	*/
+#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
+#define CONFIG_SYS_MAX_FLASH_SECT	256	/* max number of sectors on one chip	*/
 
-#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
-#define CFG_FLASH_WRITE_TOUT	1000	/* Timeout for Flash Write (in ms)	*/
+#define CONFIG_SYS_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
+#define CONFIG_SYS_FLASH_WRITE_TOUT	1000	/* Timeout for Flash Write (in ms)	*/
 
-#define CFG_FLASH_WORD_SIZE     unsigned short  /* flash word size (width)      */
-#define CFG_FLASH_ADDR0         0x5555  /* 1st address for flash config cycles  */
-#define CFG_FLASH_ADDR1         0x2AAA  /* 2nd address for flash config cycles  */
+#define CONFIG_SYS_FLASH_WORD_SIZE     unsigned short  /* flash word size (width)      */
+#define CONFIG_SYS_FLASH_ADDR0         0x5555  /* 1st address for flash config cycles  */
+#define CONFIG_SYS_FLASH_ADDR1         0x2AAA  /* 2nd address for flash config cycles  */
 /*
  * The following defines are added for buggy IOP480 byte interface.
  * All other boards should use the standard values (CPCI405 etc.)
  */
-#define CFG_FLASH_READ0         0x0000  /* 0 is standard                        */
-#define CFG_FLASH_READ1         0x0001  /* 1 is standard                        */
-#define CFG_FLASH_READ2         0x0002  /* 2 is standard                        */
+#define CONFIG_SYS_FLASH_READ0         0x0000  /* 0 is standard                        */
+#define CONFIG_SYS_FLASH_READ1         0x0001  /* 1 is standard                        */
+#define CONFIG_SYS_FLASH_READ2         0x0002  /* 2 is standard                        */
 
-#define CFG_FLASH_EMPTY_INFO            /* print 'E' for empty sector on flinfo */
+#define CONFIG_SYS_FLASH_EMPTY_INFO            /* print 'E' for empty sector on flinfo */
 
 #if 0 /* test-only */
-#define CFG_JFFS2_FIRST_BANK    0           /* use for JFFS2 */
-#define CFG_JFFS2_NUM_BANKS     1           /* ! second bank contains U-Boot */
+#define CONFIG_SYS_JFFS2_FIRST_BANK    0           /* use for JFFS2 */
+#define CONFIG_SYS_JFFS2_NUM_BANKS     1           /* ! second bank contains U-Boot */
 #endif
 
 /*-----------------------------------------------------------------------
  * Start addresses for the final memory configuration
  * (Set up by the startup code)
- * Please note that CFG_SDRAM_BASE _must_ start at 0
+ * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
  */
-#define CFG_SDRAM_BASE		0x00000000
-#define CFG_FLASH_BASE		0xFFF80000
-#define CFG_MONITOR_BASE	TEXT_BASE
-#define CFG_MONITOR_LEN		(512 * 1024)	/* Reserve 512 kB for Monitor	*/
-#define CFG_MALLOC_LEN		(4 << 20)	/* Reserve 4 MB for malloc()	*/
-
-#if (CFG_MONITOR_BASE < FLASH_BASE0_PRELIM)
-# define CFG_RAMBOOT		1
+#define CONFIG_SYS_SDRAM_BASE		0x00000000
+#define CONFIG_SYS_FLASH_BASE		0xFFF80000
+#define CONFIG_SYS_MONITOR_BASE	TEXT_BASE
+#define CONFIG_SYS_MONITOR_LEN		(512 * 1024)	/* Reserve 512 kB for Monitor	*/
+#define CONFIG_SYS_MALLOC_LEN		(4 << 20)	/* Reserve 4 MB for malloc()	*/
+
+#if (CONFIG_SYS_MONITOR_BASE < FLASH_BASE0_PRELIM)
+# define CONFIG_SYS_RAMBOOT		1
 #else
-# undef CFG_RAMBOOT
+# undef CONFIG_SYS_RAMBOOT
 #endif
 
 /*-----------------------------------------------------------------------
  * Environment Variable setup
  */
-#define CFG_ENV_IS_IN_EEPROM    1       /* use EEPROM for environment vars */
-#define CFG_ENV_OFFSET          0x100   /* environment starts at the beginning of the EEPROM */
-#define CFG_ENV_SIZE            0x700   /* 2048 bytes may be used for env vars*/
+#define CONFIG_ENV_IS_IN_EEPROM    1       /* use EEPROM for environment vars */
+#define CONFIG_ENV_OFFSET          0x100   /* environment starts at the beginning of the EEPROM */
+#define CONFIG_ENV_SIZE            0x700   /* 2048 bytes may be used for env vars*/
 				   /* total size of a CAT24WC16 is 2048 bytes */
 
-#define CFG_NVRAM_BASE_ADDR	0xF4080000		/* NVRAM base address	*/
-#define CFG_NVRAM_SIZE		0x8000		        /* NVRAM size		*/
+#define CONFIG_SYS_NVRAM_BASE_ADDR	0xF4080000		/* NVRAM base address	*/
+#define CONFIG_SYS_NVRAM_SIZE		0x8000		        /* NVRAM size		*/
 
 /*-----------------------------------------------------------------------
  * I2C EEPROM (CAT24WC16) for environment
  */
 #define CONFIG_HARD_I2C			/* I2c with hardware support */
 #if 0 /* test-only */
-#define CFG_I2C_SPEED		400000	/* I2C speed and slave address */
+#define CONFIG_SYS_I2C_SPEED		400000	/* I2C speed and slave address */
 #else
-#define CFG_I2C_SPEED		100000	/* I2C speed and slave address */
+#define CONFIG_SYS_I2C_SPEED		100000	/* I2C speed and slave address */
 #endif
-#define CFG_I2C_SLAVE		0x7F
+#define CONFIG_SYS_I2C_SLAVE		0x7F
 
-#define CFG_I2C_EEPROM_ADDR	0x50	/* EEPROM CAT24WC08		*/
-#define CFG_EEPROM_WREN         1
+#define CONFIG_SYS_I2C_EEPROM_ADDR	0x50	/* EEPROM CAT24WC08		*/
+#define CONFIG_SYS_EEPROM_WREN         1
 
 #if 1 /* test-only */
 /* CAT24WC08/16... */
-#define CFG_I2C_EEPROM_ADDR_LEN	1	/* Bytes of address		*/
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN	1	/* Bytes of address		*/
 /* mask of address bits that overflow into the "EEPROM chip address"    */
-#define CFG_I2C_EEPROM_ADDR_OVERFLOW	0x07
-#define CFG_EEPROM_PAGE_WRITE_BITS 4	/* The Catalyst CAT24WC08 has	*/
+#define CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW	0x07
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 4	/* The Catalyst CAT24WC08 has	*/
 					/* 16 byte page write mode using*/
 					/* last	4 bits of the address	*/
 #else
 /* CAT24WC32/64... */
-#define CFG_I2C_EEPROM_ADDR_LEN	2	/* Bytes of address		*/
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN	2	/* Bytes of address		*/
 /* mask of address bits that overflow into the "EEPROM chip address"    */
-#define CFG_I2C_EEPROM_ADDR_OVERFLOW	0x01
-#define CFG_EEPROM_PAGE_WRITE_BITS 5	/* The Catalyst CAT24WC32 has	*/
+#define CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW	0x01
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 5	/* The Catalyst CAT24WC32 has	*/
 					/* 32 byte page write mode using*/
 					/* last	5 bits of the address	*/
 #endif
-#define CFG_EEPROM_PAGE_WRITE_DELAY_MS	10   /* and takes up to 10 msec */
-#define CFG_EEPROM_PAGE_WRITE_ENABLE
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	10   /* and takes up to 10 msec */
 
 /*-----------------------------------------------------------------------
  * External Bus Controller (EBC) Setup
@@ -368,37 +368,37 @@
 
 #define CAN_BA          0xF0000000          /* CAN Base Address                 */
 #define LCD_BA          0xF1000000          /* Epson LCD Base Address           */
-#define CFG_NAND_BASE   0xF4000000          /* NAND FLASH Base Address          */
-#define CFG_NVRAM_BASE  0xF4080000          /* NVRAM Base Address               */
+#define CONFIG_SYS_NAND_BASE   0xF4000000          /* NAND FLASH Base Address          */
+#define CONFIG_SYS_NVRAM_BASE  0xF4080000          /* NVRAM Base Address               */
 
 /* Memory Bank 0 (Flash Bank 0, NOR-FLASH) initialization                       */
-#define CFG_EBC_PB0AP           0x92015480
-#define CFG_EBC_PB0CR           0xFFC5A000  /* BAS=0xFFC,BS=4MB,BU=R/W,BW=16bit */
+#define CONFIG_SYS_EBC_PB0AP           0x92015480
+#define CONFIG_SYS_EBC_PB0CR           0xFFC5A000  /* BAS=0xFFC,BS=4MB,BU=R/W,BW=16bit */
 
 /* Memory Bank 1 (Flash Bank 1, NAND-FLASH & NVRAM) initialization              */
-#define CFG_EBC_PB1AP           0x92015480
-#define CFG_EBC_PB1CR           0xF4018000  /* BAS=0xF40,BS=1MB,BU=R/W,BW=8bit  */
+#define CONFIG_SYS_EBC_PB1AP           0x92015480
+#define CONFIG_SYS_EBC_PB1CR           0xF4018000  /* BAS=0xF40,BS=1MB,BU=R/W,BW=8bit  */
 
 /* Memory Bank 2 (8 Bit Peripheral: CAN, UART, RTC) initialization              */
-#define CFG_EBC_PB2AP           0x010053C0  /* BWT=2,WBN=1,WBF=1,TH=1,RE=1,SOR=1,BEM=1 */
-#define CFG_EBC_PB2CR           0xF0018000  /* BAS=0xF00,BS=1MB,BU=R/W,BW=8bit  */
+#define CONFIG_SYS_EBC_PB2AP           0x010053C0  /* BWT=2,WBN=1,WBF=1,TH=1,RE=1,SOR=1,BEM=1 */
+#define CONFIG_SYS_EBC_PB2CR           0xF0018000  /* BAS=0xF00,BS=1MB,BU=R/W,BW=8bit  */
 
 /* Memory Bank 3 (16 Bit Peripheral: FPGA internal, dig. IO) initialization     */
-#define CFG_EBC_PB3AP           0x010053C0  /* BWT=2,WBN=1,WBF=1,TH=1,RE=1,SOR=1,BEM=1 */
-#define CFG_EBC_PB3CR           0xF011A000  /* BAS=0xF01,BS=1MB,BU=R/W,BW=16bit */
+#define CONFIG_SYS_EBC_PB3AP           0x010053C0  /* BWT=2,WBN=1,WBF=1,TH=1,RE=1,SOR=1,BEM=1 */
+#define CONFIG_SYS_EBC_PB3CR           0xF011A000  /* BAS=0xF01,BS=1MB,BU=R/W,BW=16bit */
 
 /* Memory Bank 4 (Epson LCD) initialization                                     */
-#define CFG_EBC_PB4AP   0x03805380   /* BWT=2,WBN=1,WBF=1,TH=1,RE=1,SOR=1,BEM=0 */
-#define CFG_EBC_PB4CR   LCD_BA | 0x7A000    /* BAS=0xF10,BS=8MB,BU=R/W,BW=16bit */
+#define CONFIG_SYS_EBC_PB4AP   0x03805380   /* BWT=2,WBN=1,WBF=1,TH=1,RE=1,SOR=1,BEM=0 */
+#define CONFIG_SYS_EBC_PB4CR   LCD_BA | 0x7A000    /* BAS=0xF10,BS=8MB,BU=R/W,BW=16bit */
 
 /*-----------------------------------------------------------------------
  * LCD Setup
  */
 
-#define CFG_LCD_BIG_MEM         0xF1200000  /* Epson S1D13806 Mem Base Address  */
-#define CFG_LCD_BIG_REG         0xF1000000  /* Epson S1D13806 Reg Base Address  */
-#define CFG_LCD_SMALL_MEM       0xF1400000  /* Epson S1D13704 Mem Base Address  */
-#define CFG_LCD_SMALL_REG       0xF140FFE0  /* Epson S1D13704 Reg Base Address  */
+#define CONFIG_SYS_LCD_BIG_MEM         0xF1200000  /* Epson S1D13806 Mem Base Address  */
+#define CONFIG_SYS_LCD_BIG_REG         0xF1000000  /* Epson S1D13806 Reg Base Address  */
+#define CONFIG_SYS_LCD_SMALL_MEM       0xF1400000  /* Epson S1D13704 Mem Base Address  */
+#define CONFIG_SYS_LCD_SMALL_REG       0xF140FFE0  /* Epson S1D13704 Reg Base Address  */
 
 /*-----------------------------------------------------------------------
  * Universal Interrupt Controller (UIC) Setup
@@ -407,30 +407,30 @@
 /*
  * define UIC_EXT0 ... UIC_EXT6 if external interrupt is active high
  */
-#define CFG_UIC0_POLARITY       (0xFFFFFF80 | UIC_MASK(VECNUM_EIRQ6))
+#define CONFIG_SYS_UIC0_POLARITY       (0xFFFFFF80 | UIC_MASK(VECNUM_EIRQ6))
 
 /*-----------------------------------------------------------------------
  * FPGA stuff
  */
 
-#define CFG_FPGA_BASE_ADDR 0xF0100100       /* FPGA internal Base Address       */
+#define CONFIG_SYS_FPGA_BASE_ADDR 0xF0100100       /* FPGA internal Base Address       */
 
 /* FPGA internal regs */
-#define CFG_FPGA_CTRL           0x000
+#define CONFIG_SYS_FPGA_CTRL           0x000
 
 /* FPGA Control Reg */
-#define CFG_FPGA_CTRL_REV0      0x0001
-#define CFG_FPGA_CTRL_REV1      0x0002
-#define CFG_FPGA_CTRL_VGA0_BL   0x0004
-#define CFG_FPGA_CTRL_VGA0_BL_MODE 0x0008
-#define CFG_FPGA_CTRL_CF_RESET  0x0040
-#define CFG_FPGA_CTRL_PS2_PWR   0x0080
-#define CFG_FPGA_CTRL_CF_PWRN   0x0100      /* low active                    */
-#define CFG_FPGA_CTRL_CF_BUS_EN 0x0200
-#define CFG_FPGA_CTRL_LCD_CLK   0x7000      /* Mask for lcd clock            */
-#define CFG_FPGA_CTRL_OW_ENABLE 0x8000
-
-#define CFG_FPGA_STATUS_CF_DETECT 0x8000
+#define CONFIG_SYS_FPGA_CTRL_REV0      0x0001
+#define CONFIG_SYS_FPGA_CTRL_REV1      0x0002
+#define CONFIG_SYS_FPGA_CTRL_VGA0_BL   0x0004
+#define CONFIG_SYS_FPGA_CTRL_VGA0_BL_MODE 0x0008
+#define CONFIG_SYS_FPGA_CTRL_CF_RESET  0x0040
+#define CONFIG_SYS_FPGA_CTRL_PS2_PWR   0x0080
+#define CONFIG_SYS_FPGA_CTRL_CF_PWRN   0x0100      /* low active                    */
+#define CONFIG_SYS_FPGA_CTRL_CF_BUS_EN 0x0200
+#define CONFIG_SYS_FPGA_CTRL_LCD_CLK   0x7000      /* Mask for lcd clock            */
+#define CONFIG_SYS_FPGA_CTRL_OW_ENABLE 0x8000
+
+#define CONFIG_SYS_FPGA_STATUS_CF_DETECT 0x8000
 
 #define LCD_CLK_OFF             0x0000      /* Off                           */
 #define LCD_CLK_02083           0x1000      /* 2.083 MHz                     */
@@ -441,31 +441,31 @@
 #define LCD_CLK_12500           0x6000      /* 12.50 MHz                     */
 #define LCD_CLK_25000           0x7000      /* 25.00 MHz                     */
 
-#define CFG_FPGA_SPARTAN2       1           /* using Xilinx Spartan 2 now    */
-#define CFG_FPGA_MAX_SIZE       128*1024    /* 128kByte is enough for XC2S50E*/
+#define CONFIG_SYS_FPGA_SPARTAN2       1           /* using Xilinx Spartan 2 now    */
+#define CONFIG_SYS_FPGA_MAX_SIZE       128*1024    /* 128kByte is enough for XC2S50E*/
 
 /* FPGA program pin configuration */
-#define CFG_FPGA_PRG            0x04000000  /* FPGA program pin (ppc output) */
-#define CFG_FPGA_CLK            0x02000000  /* FPGA clk pin (ppc output)     */
-#define CFG_FPGA_DATA           0x01000000  /* FPGA data pin (ppc output)    */
-#define CFG_FPGA_INIT           0x00010000  /* FPGA init pin (ppc input)     */
-#define CFG_FPGA_DONE           0x00008000  /* FPGA done pin (ppc input)     */
+#define CONFIG_SYS_FPGA_PRG            0x04000000  /* FPGA program pin (ppc output) */
+#define CONFIG_SYS_FPGA_CLK            0x02000000  /* FPGA clk pin (ppc output)     */
+#define CONFIG_SYS_FPGA_DATA           0x01000000  /* FPGA data pin (ppc output)    */
+#define CONFIG_SYS_FPGA_INIT           0x00010000  /* FPGA init pin (ppc input)     */
+#define CONFIG_SYS_FPGA_DONE           0x00008000  /* FPGA done pin (ppc input)     */
 
 /*-----------------------------------------------------------------------
  * Definitions for initial stack pointer and data area (in data cache)
  */
 /* use on chip memory ( OCM ) for temperary stack until sdram is tested */
-#define CFG_TEMP_STACK_OCM        1
+#define CONFIG_SYS_TEMP_STACK_OCM        1
 
 /* On Chip Memory location */
-#define CFG_OCM_DATA_ADDR	0xF8000000
-#define CFG_OCM_DATA_SIZE	0x1000
-#define CFG_INIT_RAM_ADDR	CFG_OCM_DATA_ADDR /* inside of SDRAM		*/
-#define CFG_INIT_RAM_END	CFG_OCM_DATA_SIZE /* End of used area in RAM	*/
+#define CONFIG_SYS_OCM_DATA_ADDR	0xF8000000
+#define CONFIG_SYS_OCM_DATA_SIZE	0x1000
+#define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_OCM_DATA_ADDR /* inside of SDRAM		*/
+#define CONFIG_SYS_INIT_RAM_END	CONFIG_SYS_OCM_DATA_SIZE /* End of used area in RAM	*/
 
-#define CFG_GBL_DATA_SIZE      128  /* size in bytes reserved for initial data */
-#define CFG_GBL_DATA_OFFSET    (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP_OFFSET      CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_GBL_DATA_SIZE      128  /* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET    (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET      CONFIG_SYS_GBL_DATA_OFFSET
 
 /*-----------------------------------------------------------------------
  * Definitions for GPIO setup (PPC405EP specific)
@@ -479,19 +479,19 @@
  * GPIO0[28-29] - UART1 data signal input/output
  * GPIO0[30-31] - EMAC0 and EMAC1 reject packet inputs
  */
-#define CFG_GPIO0_OSRH		0x40000550
-#define CFG_GPIO0_OSRL		0x00000110
-#define CFG_GPIO0_ISR1H		0x00000000
-#define CFG_GPIO0_ISR1L		0x15555440
-#define CFG_GPIO0_TSRH		0x00000000
-#define CFG_GPIO0_TSRL		0x00000000
-#define CFG_GPIO0_TCR		0xF7FE0017
-
-#define CFG_LCD_ENDIAN		(0x80000000 >> 7)
-#define CFG_EEPROM_WP		(0x80000000 >> 8)   /* GPIO8 */
-#define CFG_TOUCH_RST		(0x80000000 >> 9)   /* GPIO9 */
-#define CFG_LCD0_RST		(0x80000000 >> 30)
-#define CFG_LCD1_RST		(0x80000000 >> 31)
+#define CONFIG_SYS_GPIO0_OSRH		0x40000550
+#define CONFIG_SYS_GPIO0_OSRL		0x00000110
+#define CONFIG_SYS_GPIO0_ISR1H		0x00000000
+#define CONFIG_SYS_GPIO0_ISR1L		0x15555440
+#define CONFIG_SYS_GPIO0_TSRH		0x00000000
+#define CONFIG_SYS_GPIO0_TSRL		0x00000000
+#define CONFIG_SYS_GPIO0_TCR		0xF7FE0017
+
+#define CONFIG_SYS_LCD_ENDIAN		(0x80000000 >> 7)
+#define CONFIG_SYS_EEPROM_WP		(0x80000000 >> 8)   /* GPIO8 */
+#define CONFIG_SYS_TOUCH_RST		(0x80000000 >> 9)   /* GPIO9 */
+#define CONFIG_SYS_LCD0_RST		(0x80000000 >> 30)
+#define CONFIG_SYS_LCD1_RST		(0x80000000 >> 31)
 
 /*
  * Internal Definitions
diff --git a/include/configs/HIDDEN_DRAGON.h b/include/configs/HIDDEN_DRAGON.h
index 5deb84de5..f6777b9bb 100644
--- a/include/configs/HIDDEN_DRAGON.h
+++ b/include/configs/HIDDEN_DRAGON.h
@@ -77,14 +77,14 @@
 /*
  * Miscellaneous configurable options
  */
-#define CFG_LONGHELP		1		/* undef to save memory		*/
-#define CFG_PROMPT		"=> "		/* Monitor Command Prompt	*/
-#define CFG_CBSIZE		256		/* Console I/O Buffer Size	*/
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16)	/* Print Buffer Size	*/
-#define CFG_MAXARGS		16		/* max number of command args	*/
-#define CFG_BARGSIZE		CFG_CBSIZE	/* Boot Argument Buffer Size	*/
-#define CFG_LOAD_ADDR		0x00100000	/* default load address		*/
-#define CFG_HZ			1000		/* decrementer freq: 1 ms ticks */
+#define CONFIG_SYS_LONGHELP		1		/* undef to save memory		*/
+#define CONFIG_SYS_PROMPT		"=> "		/* Monitor Command Prompt	*/
+#define CONFIG_SYS_CBSIZE		256		/* Console I/O Buffer Size	*/
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)	/* Print Buffer Size	*/
+#define CONFIG_SYS_MAXARGS		16		/* max number of command args	*/
+#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
+#define CONFIG_SYS_LOAD_ADDR		0x00100000	/* default load address		*/
+#define CONFIG_SYS_HZ			1000		/* decrementer freq: 1 ms ticks */
 
 /*-----------------------------------------------------------------------
  * PCI stuff
@@ -95,7 +95,7 @@
 
 #define CONFIG_NET_MULTI			/* Multi ethernet cards support */
 
-#define CFG_RX_ETH_BUFFER	8		/* use 8 rx buffer on eepro100	*/
+#define CONFIG_SYS_RX_ETH_BUFFER	8		/* use 8 rx buffer on eepro100	*/
 
 #define PCI_ENET0_IOADDR	0x80000000
 #define PCI_ENET0_MEMADDR	0x80000000
@@ -114,53 +114,53 @@
 /*-----------------------------------------------------------------------
  * Start addresses for the final memory configuration
  * (Set up by the startup code)
- * Please note that CFG_SDRAM_BASE _must_ start at 0
+ * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
  */
-#define CFG_SDRAM_BASE		0x00000000
-#define CFG_MAX_RAM_SIZE	0x02000000
+#define CONFIG_SYS_SDRAM_BASE		0x00000000
+#define CONFIG_SYS_MAX_RAM_SIZE	0x02000000
 
-#define CFG_RESET_ADDRESS	0xFFF00100
+#define CONFIG_SYS_RESET_ADDRESS	0xFFF00100
 
 #if defined (USE_DINK32)
-#define CFG_MONITOR_LEN		0x00030000
-#define CFG_MONITOR_BASE	0x00090000
-#define CFG_RAMBOOT		1
-#define CFG_INIT_RAM_ADDR	(CFG_MONITOR_BASE + CFG_MONITOR_LEN)
-#define CFG_INIT_RAM_END	0x10000
-#define CFG_GBL_DATA_SIZE	256  /* size in bytes reserved for initial data */
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_MONITOR_LEN		0x00030000
+#define CONFIG_SYS_MONITOR_BASE	0x00090000
+#define CONFIG_SYS_RAMBOOT		1
+#define CONFIG_SYS_INIT_RAM_ADDR	(CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)
+#define CONFIG_SYS_INIT_RAM_END	0x10000
+#define CONFIG_SYS_GBL_DATA_SIZE	256  /* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 #else
-#undef	CFG_RAMBOOT
-#define CFG_MONITOR_LEN		0x00030000
-#define CFG_MONITOR_BASE	TEXT_BASE
+#undef	CONFIG_SYS_RAMBOOT
+#define CONFIG_SYS_MONITOR_LEN		0x00030000
+#define CONFIG_SYS_MONITOR_BASE	TEXT_BASE
 
-#define CFG_GBL_DATA_SIZE	128
+#define CONFIG_SYS_GBL_DATA_SIZE	128
 
-#define CFG_INIT_RAM_ADDR     0x40000000
-#define CFG_INIT_RAM_END      0x1000
-#define CFG_GBL_DATA_OFFSET  (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_RAM_ADDR     0x40000000
+#define CONFIG_SYS_INIT_RAM_END      0x1000
+#define CONFIG_SYS_GBL_DATA_OFFSET  (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
 
 #endif
 
-#define CFG_FLASH_BASE		0xFFE00000
-#define CFG_FLASH_SIZE		(2 * 1024 * 1024)	/* Unity has onboard 1MByte flash */
-#define CFG_ENV_IS_IN_FLASH	1
-#define CFG_ENV_OFFSET		0x00004000	/* Offset of Environment Sector */
-#define CFG_ENV_SIZE		0x00002000	/* Total Size of Environment Sector */
+#define CONFIG_SYS_FLASH_BASE		0xFFE00000
+#define CONFIG_SYS_FLASH_SIZE		(2 * 1024 * 1024)	/* Unity has onboard 1MByte flash */
+#define CONFIG_ENV_IS_IN_FLASH	1
+#define CONFIG_ENV_OFFSET		0x00004000	/* Offset of Environment Sector */
+#define CONFIG_ENV_SIZE		0x00002000	/* Total Size of Environment Sector */
 
-#define CFG_MALLOC_LEN		(512 << 10)	/* Reserve 512 kB for malloc()	*/
+#define CONFIG_SYS_MALLOC_LEN		(512 << 10)	/* Reserve 512 kB for malloc()	*/
 
-#define CFG_MEMTEST_START	0x00000000	/* memtest works on		*/
-#define CFG_MEMTEST_END		0x02000000	/* 0 ... 32 MB in DRAM		*/
+#define CONFIG_SYS_MEMTEST_START	0x00000000	/* memtest works on		*/
+#define CONFIG_SYS_MEMTEST_END		0x02000000	/* 0 ... 32 MB in DRAM		*/
 
-#define CFG_EUMB_ADDR		0xFC000000
+#define CONFIG_SYS_EUMB_ADDR		0xFC000000
 
-#define CFG_ISA_MEM		0xFD000000
-#define CFG_ISA_IO		0xFE000000
+#define CONFIG_SYS_ISA_MEM		0xFD000000
+#define CONFIG_SYS_ISA_IO		0xFE000000
 
-#define CFG_FLASH_RANGE_BASE	0xFFE00000	/* flash memory address range	*/
-#define CFG_FLASH_RANGE_SIZE	0x00200000
+#define CONFIG_SYS_FLASH_RANGE_BASE	0xFFE00000	/* flash memory address range	*/
+#define CONFIG_SYS_FLASH_RANGE_SIZE	0x00200000
 #define FLASH_BASE0_PRELIM	0xFFE00000	/* processor board flash	*/
 
 /*
@@ -172,8 +172,8 @@
  */
 #define CONFIG_HARD_I2C		1		/* To enable I2C support	*/
 #undef	CONFIG_SOFT_I2C				/* I2C bit-banged		*/
-#define CFG_I2C_SPEED		400000		/* I2C speed and slave address	*/
-#define CFG_I2C_SLAVE		0x7F
+#define CONFIG_SYS_I2C_SPEED		400000		/* I2C speed and slave address	*/
+#define CONFIG_SYS_I2C_SLAVE		0x7F
 
 #ifdef CONFIG_SOFT_I2C
 #error "Soft I2C is not configured properly.  Please review!"
@@ -188,13 +188,13 @@
 #define I2C_DELAY		udelay(5)	/* 1/4 I2C clock duration */
 #endif /* CONFIG_SOFT_I2C */
 
-#define CFG_I2C_EEPROM_ADDR	0x57		/* EEPROM IS24C02		*/
-#define CFG_I2C_EEPROM_ADDR_LEN 1		/* Bytes of address		*/
-#define CFG_EEPROM_PAGE_WRITE_BITS	3
-#define CFG_EEPROM_PAGE_WRITE_DELAY_MS	10	/* and takes up to 10 msec */
+#define CONFIG_SYS_I2C_EEPROM_ADDR	0x57		/* EEPROM IS24C02		*/
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1		/* Bytes of address		*/
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS	3
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	10	/* and takes up to 10 msec */
 
-#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
-#define CFG_FLASH_BANKS		{ FLASH_BASE0_PRELIM }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+#define CONFIG_SYS_FLASH_BANKS		{ FLASH_BASE0_PRELIM }
 
 /*-----------------------------------------------------------------------
  * Definitions for initial stack pointer and data area (in DPRAM)
@@ -202,12 +202,12 @@
 
 
 #define CONFIG_WINBOND_83C553	1	/*has a winbond bridge			*/
-#define CFG_USE_WINBOND_IDE	0	/*use winbond 83c553 internal IDE ctrlr */
-#define CFG_WINBOND_ISA_CFG_ADDR    0x80005800	/*pci-isa bridge config addr	*/
-#define CFG_WINBOND_IDE_CFG_ADDR    0x80005900	/*ide config addr		*/
+#define CONFIG_SYS_USE_WINBOND_IDE	0	/*use winbond 83c553 internal IDE ctrlr */
+#define CONFIG_SYS_WINBOND_ISA_CFG_ADDR    0x80005800	/*pci-isa bridge config addr	*/
+#define CONFIG_SYS_WINBOND_IDE_CFG_ADDR    0x80005900	/*ide config addr		*/
 
-#define CFG_IDE_MAXBUS		2   /* max. 2 IDE busses	*/
-#define CFG_IDE_MAXDEVICE	(CFG_IDE_MAXBUS*2) /* max. 2 drives per IDE bus */
+#define CONFIG_SYS_IDE_MAXBUS		2   /* max. 2 IDE busses	*/
+#define CONFIG_SYS_IDE_MAXDEVICE	(CONFIG_SYS_IDE_MAXBUS*2) /* max. 2 drives per IDE bus */
 
 /* TODO: Change this to VIA686A */
 
@@ -216,40 +216,40 @@
  */
 #define CONFIG_NS87308			/* Nat Semi super-io controller on ISA bus */
 
-#define CFG_NS87308_BADDR_10	1
+#define CONFIG_SYS_NS87308_BADDR_10	1
 
-#define CFG_NS87308_DEVS	( CFG_NS87308_UART1   | \
-				  CFG_NS87308_UART2   | \
-				  CFG_NS87308_POWRMAN | \
-				  CFG_NS87308_RTC_APC )
+#define CONFIG_SYS_NS87308_DEVS	( CONFIG_SYS_NS87308_UART1   | \
+				  CONFIG_SYS_NS87308_UART2   | \
+				  CONFIG_SYS_NS87308_POWRMAN | \
+				  CONFIG_SYS_NS87308_RTC_APC )
 
-#undef	CFG_NS87308_PS2MOD
+#undef	CONFIG_SYS_NS87308_PS2MOD
 
-#define CFG_NS87308_CS0_BASE	0x0076
-#define CFG_NS87308_CS0_CONF	0x30
-#define CFG_NS87308_CS1_BASE	0x0075
-#define CFG_NS87308_CS1_CONF	0x30
-#define CFG_NS87308_CS2_BASE	0x0074
-#define CFG_NS87308_CS2_CONF	0x30
+#define CONFIG_SYS_NS87308_CS0_BASE	0x0076
+#define CONFIG_SYS_NS87308_CS0_CONF	0x30
+#define CONFIG_SYS_NS87308_CS1_BASE	0x0075
+#define CONFIG_SYS_NS87308_CS1_CONF	0x30
+#define CONFIG_SYS_NS87308_CS2_BASE	0x0074
+#define CONFIG_SYS_NS87308_CS2_CONF	0x30
 
 /*
  * NS16550 Configuration
  */
-#define CFG_NS16550
-#define CFG_NS16550_SERIAL
+#define CONFIG_SYS_NS16550
+#define CONFIG_SYS_NS16550_SERIAL
 
-#define CFG_NS16550_REG_SIZE	1
+#define CONFIG_SYS_NS16550_REG_SIZE	1
 
 #if (CONFIG_CONS_INDEX > 2)
-#define CFG_NS16550_CLK		CONFIG_DRAM_SPEED*1000000
+#define CONFIG_SYS_NS16550_CLK		CONFIG_DRAM_SPEED*1000000
 #else
-#define CFG_NS16550_CLK		1843200
+#define CONFIG_SYS_NS16550_CLK		1843200
 #endif
 
-#define CFG_NS16550_COM1	(CFG_ISA_IO + CFG_NS87308_UART1_BASE)
-#define CFG_NS16550_COM2	(CFG_ISA_IO + CFG_NS87308_UART2_BASE)
-#define CFG_NS16550_COM3	(CFG_EUMB_ADDR + 0x4500)
-#define CFG_NS16550_COM4	(CFG_EUMB_ADDR + 0x4600)
+#define CONFIG_SYS_NS16550_COM1	(CONFIG_SYS_ISA_IO + CONFIG_SYS_NS87308_UART1_BASE)
+#define CONFIG_SYS_NS16550_COM2	(CONFIG_SYS_ISA_IO + CONFIG_SYS_NS87308_UART2_BASE)
+#define CONFIG_SYS_NS16550_COM3	(CONFIG_SYS_EUMB_ADDR + 0x4500)
+#define CONFIG_SYS_NS16550_COM4	(CONFIG_SYS_EUMB_ADDR + 0x4600)
 
 /*
  * Low Level Configuration Settings
@@ -259,27 +259,27 @@
 
 #define CONFIG_SYS_CLK_FREQ  33333333	/* external frequency to pll */
 
-#define CFG_ROMNAL		7	/*rom/flash next access time		*/
-#define CFG_ROMFAL		11	/*rom/flash access time			*/
+#define CONFIG_SYS_ROMNAL		7	/*rom/flash next access time		*/
+#define CONFIG_SYS_ROMFAL		11	/*rom/flash access time			*/
 
-#define CFG_REFINT	430	/* no of clock cycles between CBR refresh cycles */
+#define CONFIG_SYS_REFINT	430	/* no of clock cycles between CBR refresh cycles */
 
 /* the following are for SDRAM only*/
-#define CFG_BSTOPRE	121	/* Burst To Precharge, sets open page interval */
-#define CFG_REFREC		8	/* Refresh to activate interval		*/
-#define CFG_RDLAT		4	/* data latency from read command	*/
-#define CFG_PRETOACT		3	/* Precharge to activate interval	*/
-#define CFG_ACTTOPRE		5	/* Activate to Precharge interval	*/
-#define CFG_ACTORW		3	/* Activate to R/W			*/
-#define CFG_SDMODE_CAS_LAT	3	/* SDMODE CAS latency			*/
-#define CFG_SDMODE_WRAP		0	/* SDMODE wrap type			*/
+#define CONFIG_SYS_BSTOPRE	121	/* Burst To Precharge, sets open page interval */
+#define CONFIG_SYS_REFREC		8	/* Refresh to activate interval		*/
+#define CONFIG_SYS_RDLAT		4	/* data latency from read command	*/
+#define CONFIG_SYS_PRETOACT		3	/* Precharge to activate interval	*/
+#define CONFIG_SYS_ACTTOPRE		5	/* Activate to Precharge interval	*/
+#define CONFIG_SYS_ACTORW		3	/* Activate to R/W			*/
+#define CONFIG_SYS_SDMODE_CAS_LAT	3	/* SDMODE CAS latency			*/
+#define CONFIG_SYS_SDMODE_WRAP		0	/* SDMODE wrap type			*/
 #if 0
-#define CFG_SDMODE_BURSTLEN	2	/* OBSOLETE!  SDMODE Burst length 2=4, 3=8		*/
+#define CONFIG_SYS_SDMODE_BURSTLEN	2	/* OBSOLETE!  SDMODE Burst length 2=4, 3=8		*/
 #endif
 
-#define CFG_REGISTERD_TYPE_BUFFER   1
-#define CFG_EXTROM 1
-#define CFG_REGDIMM 0
+#define CONFIG_SYS_REGISTERD_TYPE_BUFFER   1
+#define CONFIG_SYS_EXTROM 1
+#define CONFIG_SYS_REGDIMM 0
 
 
 /* memory bank settings*/
@@ -289,93 +289,93 @@
  * bits will be set to 0x00000 for a start address, or 0xfffff for an
  * end address
  */
-#define CFG_BANK0_START		0x00000000
-#define CFG_BANK0_END		(CFG_MAX_RAM_SIZE - 1)
-#define CFG_BANK0_ENABLE	1
-#define CFG_BANK1_START		0x3ff00000
-#define CFG_BANK1_END		0x3fffffff
-#define CFG_BANK1_ENABLE	0
-#define CFG_BANK2_START		0x3ff00000
-#define CFG_BANK2_END		0x3fffffff
-#define CFG_BANK2_ENABLE	0
-#define CFG_BANK3_START		0x3ff00000
-#define CFG_BANK3_END		0x3fffffff
-#define CFG_BANK3_ENABLE	0
-#define CFG_BANK4_START		0x00000000
-#define CFG_BANK4_END		0x00000000
-#define CFG_BANK4_ENABLE	0
-#define CFG_BANK5_START		0x00000000
-#define CFG_BANK5_END		0x00000000
-#define CFG_BANK5_ENABLE	0
-#define CFG_BANK6_START		0x00000000
-#define CFG_BANK6_END		0x00000000
-#define CFG_BANK6_ENABLE	0
-#define CFG_BANK7_START		0x00000000
-#define CFG_BANK7_END		0x00000000
-#define CFG_BANK7_ENABLE	0
+#define CONFIG_SYS_BANK0_START		0x00000000
+#define CONFIG_SYS_BANK0_END		(CONFIG_SYS_MAX_RAM_SIZE - 1)
+#define CONFIG_SYS_BANK0_ENABLE	1
+#define CONFIG_SYS_BANK1_START		0x3ff00000
+#define CONFIG_SYS_BANK1_END		0x3fffffff
+#define CONFIG_SYS_BANK1_ENABLE	0
+#define CONFIG_SYS_BANK2_START		0x3ff00000
+#define CONFIG_SYS_BANK2_END		0x3fffffff
+#define CONFIG_SYS_BANK2_ENABLE	0
+#define CONFIG_SYS_BANK3_START		0x3ff00000
+#define CONFIG_SYS_BANK3_END		0x3fffffff
+#define CONFIG_SYS_BANK3_ENABLE	0
+#define CONFIG_SYS_BANK4_START		0x00000000
+#define CONFIG_SYS_BANK4_END		0x00000000
+#define CONFIG_SYS_BANK4_ENABLE	0
+#define CONFIG_SYS_BANK5_START		0x00000000
+#define CONFIG_SYS_BANK5_END		0x00000000
+#define CONFIG_SYS_BANK5_ENABLE	0
+#define CONFIG_SYS_BANK6_START		0x00000000
+#define CONFIG_SYS_BANK6_END		0x00000000
+#define CONFIG_SYS_BANK6_ENABLE	0
+#define CONFIG_SYS_BANK7_START		0x00000000
+#define CONFIG_SYS_BANK7_END		0x00000000
+#define CONFIG_SYS_BANK7_ENABLE	0
 /*
  * Memory bank enable bitmask, specifying which of the banks defined above
  are actually present. MSB is for bank #7, LSB is for bank #0.
  */
-#define CFG_BANK_ENABLE		0x01
+#define CONFIG_SYS_BANK_ENABLE		0x01
 
-#define CFG_ODCR		0xff	/* configures line driver impedances,	*/
+#define CONFIG_SYS_ODCR		0xff	/* configures line driver impedances,	*/
 					/* see 8240 book for bit definitions	*/
-#define CFG_PGMAX		0x32	/* how long the 8240 retains the	*/
+#define CONFIG_SYS_PGMAX		0x32	/* how long the 8240 retains the	*/
 					/* currently accessed page in memory	*/
 					/* see 8240 book for details		*/
 
 /* SDRAM 0 - 256MB */
-#define CFG_IBAT0L	(CFG_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
-#define CFG_IBAT0U	(CFG_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CONFIG_SYS_IBAT0L	(CONFIG_SYS_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
+#define CONFIG_SYS_IBAT0U	(CONFIG_SYS_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
 
 /* stack in DCACHE @ 1GB (no backing mem) */
 #if defined(USE_DINK32)
-#define CFG_IBAT1L	(0x40000000 | BATL_PP_00 )
-#define CFG_IBAT1U	(0x40000000 | BATU_BL_128K )
+#define CONFIG_SYS_IBAT1L	(0x40000000 | BATL_PP_00 )
+#define CONFIG_SYS_IBAT1U	(0x40000000 | BATU_BL_128K )
 #else
-#define CFG_IBAT1L	(CFG_INIT_RAM_ADDR | BATL_PP_10 | BATL_MEMCOHERENCE)
-#define CFG_IBAT1U	(CFG_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP)
+#define CONFIG_SYS_IBAT1L	(CONFIG_SYS_INIT_RAM_ADDR | BATL_PP_10 | BATL_MEMCOHERENCE)
+#define CONFIG_SYS_IBAT1U	(CONFIG_SYS_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP)
 #endif
 
 /* PCI memory */
-#define CFG_IBAT2L	(0x80000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
-#define CFG_IBAT2U	(0x80000000 | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CONFIG_SYS_IBAT2L	(0x80000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
+#define CONFIG_SYS_IBAT2U	(0x80000000 | BATU_BL_256M | BATU_VS | BATU_VP)
 
 /* Flash, config addrs, etc */
-#define CFG_IBAT3L	(0xF0000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
-#define CFG_IBAT3U	(0xF0000000 | BATU_BL_256M | BATU_VS | BATU_VP)
-
-#define CFG_DBAT0L	CFG_IBAT0L
-#define CFG_DBAT0U	CFG_IBAT0U
-#define CFG_DBAT1L	CFG_IBAT1L
-#define CFG_DBAT1U	CFG_IBAT1U
-#define CFG_DBAT2L	CFG_IBAT2L
-#define CFG_DBAT2U	CFG_IBAT2U
-#define CFG_DBAT3L	CFG_IBAT3L
-#define CFG_DBAT3U	CFG_IBAT3U
+#define CONFIG_SYS_IBAT3L	(0xF0000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
+#define CONFIG_SYS_IBAT3U	(0xF0000000 | BATU_BL_256M | BATU_VS | BATU_VP)
+
+#define CONFIG_SYS_DBAT0L	CONFIG_SYS_IBAT0L
+#define CONFIG_SYS_DBAT0U	CONFIG_SYS_IBAT0U
+#define CONFIG_SYS_DBAT1L	CONFIG_SYS_IBAT1L
+#define CONFIG_SYS_DBAT1U	CONFIG_SYS_IBAT1U
+#define CONFIG_SYS_DBAT2L	CONFIG_SYS_IBAT2L
+#define CONFIG_SYS_DBAT2U	CONFIG_SYS_IBAT2U
+#define CONFIG_SYS_DBAT3L	CONFIG_SYS_IBAT3L
+#define CONFIG_SYS_DBAT3U	CONFIG_SYS_IBAT3U
 
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
+#define CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
 /*-----------------------------------------------------------------------
  * FLASH organization
  */
-#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
-#define CFG_MAX_FLASH_SECT	36	/* max number of sectors on one chip	*/
+#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
+#define CONFIG_SYS_MAX_FLASH_SECT	36	/* max number of sectors on one chip	*/
 
-#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
-#define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
+#define CONFIG_SYS_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
+#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
 
 /*-----------------------------------------------------------------------
  * Cache Configuration
  */
-#define CFG_CACHELINE_SIZE	32	/* For MPC8240 CPU			*/
+#define CONFIG_SYS_CACHELINE_SIZE	32	/* For MPC8240 CPU			*/
 #if defined(CONFIG_CMD_KGDB)
-#  define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value */
+#  define CONFIG_SYS_CACHELINE_SHIFT	5	/* log base 2 of the above value */
 #endif
 
 /*
diff --git a/include/configs/HMI10.h b/include/configs/HMI10.h
index a7e7c5744..6c8e81f05 100644
--- a/include/configs/HMI10.h
+++ b/include/configs/HMI10.h
@@ -1,5 +1,5 @@
 /*
- * (C) Copyright 2000-2005
+ * (C) Copyright 2000-2008
  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
  *
  * See file CREDITS for list of people who contributed to this
@@ -52,7 +52,7 @@
 #define CONFIG_PS2KBD			/* AT-PS/2 Keyboard		*/
 #define CONFIG_PS2MULT			/* .. on PS/2 Multiplexer	*/
 #define CONFIG_PS2SERIAL	2	/* .. on COM3			*/
-#define CONFIG_PS2MULT_DELAY	(CFG_HZ/2)	/* Initial delay	*/
+#define CONFIG_PS2MULT_DELAY	(CONFIG_SYS_HZ/2)	/* Initial delay	*/
 
 #define CONFIG_BOOTCOUNT_LIMIT
 
@@ -88,14 +88,14 @@
 #define CONFIG_MISC_INIT_R	  1
 
 #define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
-#undef	CFG_LOADS_BAUD_CHANGE		/* don't allow baudrate change	*/
+#undef	CONFIG_SYS_LOADS_BAUD_CHANGE		/* don't allow baudrate change	*/
 
 /* enable I2C and select the hardware/software driver */
 #undef	CONFIG_HARD_I2C			/* I2C with hardware support	*/
 #define CONFIG_SOFT_I2C		1	/* I2C bit-banged		*/
 
-#define CFG_I2C_SPEED		40000	/* 40 kHz is supposed to work	*/
-#define CFG_I2C_SLAVE		0xFE
+#define CONFIG_SYS_I2C_SPEED		40000	/* 40 kHz is supposed to work	*/
+#define CONFIG_SYS_I2C_SLAVE		0xFE
 
 /* Software (bit-bang) I2C driver configuration */
 #define PB_SCL		0x00000020	/* PB 26 */
@@ -131,7 +131,7 @@
 #define CONFIG_DOS_PARTITION
 
 #define CONFIG_RTC_DS1337		/* Use ds1337 rtc via i2c	*/
-#define CFG_I2C_RTC_ADDR 0x68		/* at address 0x68		*/
+#define CONFIG_SYS_I2C_RTC_ADDR 0x68		/* at address 0x68		*/
 
 
 /*
@@ -156,33 +156,33 @@
 /*
  * Miscellaneous configurable options
  */
-#define CFG_LONGHELP			/* undef to save memory		*/
-#define CFG_PROMPT		"=> "	/* Monitor Command Prompt	*/
+#define CONFIG_SYS_LONGHELP			/* undef to save memory		*/
+#define CONFIG_SYS_PROMPT		"=> "	/* Monitor Command Prompt	*/
 
 #if 0
-#define CFG_HUSH_PARSER		1	/* use "hush" command parser	*/
+#define CONFIG_SYS_HUSH_PARSER		1	/* use "hush" command parser	*/
 #endif
-#ifdef	CFG_HUSH_PARSER
-#define CFG_PROMPT_HUSH_PS2	"> "
+#ifdef	CONFIG_SYS_HUSH_PARSER
+#define CONFIG_SYS_PROMPT_HUSH_PS2	"> "
 #endif
 
 #if defined(CONFIG_CMD_KGDB)
-#define CFG_CBSIZE		1024	/* Console I/O Buffer Size	*/
+#define CONFIG_SYS_CBSIZE		1024	/* Console I/O Buffer Size	*/
 #else
-#define CFG_CBSIZE		256	/* Console I/O Buffer Size	*/
+#define CONFIG_SYS_CBSIZE		256	/* Console I/O Buffer Size	*/
 #endif
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define CFG_MAXARGS		16	/* max number of command args	*/
-#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS		16	/* max number of command args	*/
+#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
 
-#define CFG_MEMTEST_START	0x0400000	/* memtest works on	*/
-#define CFG_MEMTEST_END		0x0C00000	/* 4 ... 12 MB in DRAM	*/
+#define CONFIG_SYS_MEMTEST_START	0x0400000	/* memtest works on	*/
+#define CONFIG_SYS_MEMTEST_END		0x0C00000	/* 4 ... 12 MB in DRAM	*/
 
-#define CFG_LOAD_ADDR		0x100000	/* default load address */
+#define CONFIG_SYS_LOAD_ADDR		0x100000	/* default load address */
 
-#define CFG_HZ			1000	/* decrementer freq: 1 ms ticks */
+#define CONFIG_SYS_HZ			1000	/* decrementer freq: 1 ms ticks */
 
-#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
 
 /*
  * Low Level Configuration Settings
@@ -192,69 +192,69 @@
 /*-----------------------------------------------------------------------
  * Internal Memory Mapped Register
  */
-#define CFG_IMMR		0xFFF00000
+#define CONFIG_SYS_IMMR		0xFFF00000
 
 /*-----------------------------------------------------------------------
  * Definitions for initial stack pointer and data area (in DPRAM)
  */
-#define CFG_INIT_RAM_ADDR	CFG_IMMR
-#define CFG_INIT_RAM_END	0x2F00	/* End of used area in DPRAM	*/
-#define CFG_GBL_DATA_SIZE	64  /* size in bytes reserved for initial data */
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_IMMR
+#define CONFIG_SYS_INIT_RAM_END	0x2F00	/* End of used area in DPRAM	*/
+#define CONFIG_SYS_GBL_DATA_SIZE	64  /* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
 /*-----------------------------------------------------------------------
  * Start addresses for the final memory configuration
  * (Set up by the startup code)
- * Please note that CFG_SDRAM_BASE _must_ start at 0
+ * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
  */
-#define CFG_SDRAM_BASE		0x00000000
-#define CFG_FLASH_BASE		0x40000000
-#define CFG_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor	*/
-#define CFG_MONITOR_BASE	CFG_FLASH_BASE
-#define CFG_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/
+#define CONFIG_SYS_SDRAM_BASE		0x00000000
+#define CONFIG_SYS_FLASH_BASE		0x40000000
+#define CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor	*/
+#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_FLASH_BASE
+#define CONFIG_SYS_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/
 
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
+#define CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
 
 /*-----------------------------------------------------------------------
  * FLASH organization
  */
 
 /* use CFI flash driver */
-#define CFG_FLASH_CFI		1	/* Flash is CFI conformant */
+#define CONFIG_SYS_FLASH_CFI		1	/* Flash is CFI conformant */
 #define CONFIG_FLASH_CFI_DRIVER	1	/* Use the common driver */
-#define CFG_FLASH_BANKS_LIST	{ CFG_FLASH_BASE }
-#define CFG_FLASH_EMPTY_INFO
-#define CFG_FLASH_USE_BUFFER_WRITE	1
-#define CFG_MAX_FLASH_BANKS	2	/* max number of memory banks */
-#define CFG_MAX_FLASH_SECT	71	/* max number of sectors on one chip */
+#define CONFIG_SYS_FLASH_BANKS_LIST	{ CONFIG_SYS_FLASH_BASE }
+#define CONFIG_SYS_FLASH_EMPTY_INFO
+#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE	1
+#define CONFIG_SYS_MAX_FLASH_BANKS	2	/* max number of memory banks */
+#define CONFIG_SYS_MAX_FLASH_SECT	71	/* max number of sectors on one chip */
 
-#define CFG_ENV_IS_IN_FLASH	1
-#define CFG_ENV_OFFSET		0x8000	/*   Offset   of Environment Sector	*/
-#define CFG_ENV_SIZE		0x4000	/* Total Size of Environment Sector	*/
+#define CONFIG_ENV_IS_IN_FLASH	1
+#define CONFIG_ENV_OFFSET		0x8000	/*   Offset   of Environment Sector	*/
+#define CONFIG_ENV_SIZE		0x4000	/* Total Size of Environment Sector	*/
 
 /* Address and size of Redundant Environment Sector	*/
-#define CFG_ENV_OFFSET_REDUND	(CFG_ENV_OFFSET+CFG_ENV_SIZE)
-#define CFG_ENV_SIZE_REDUND	(CFG_ENV_SIZE)
+#define CONFIG_ENV_OFFSET_REDUND	(CONFIG_ENV_OFFSET+CONFIG_ENV_SIZE)
+#define CONFIG_ENV_SIZE_REDUND	(CONFIG_ENV_SIZE)
 
 /*-----------------------------------------------------------------------
  * Hardware Information Block
  */
-#define CFG_HWINFO_OFFSET	0x0003FFC0	/* offset of HW Info block */
-#define CFG_HWINFO_SIZE		0x00000040	/* size	  of HW Info block */
-#define CFG_HWINFO_MAGIC	0x54514D38	/* 'TQM8' */
+#define CONFIG_SYS_HWINFO_OFFSET	0x0003FFC0	/* offset of HW Info block */
+#define CONFIG_SYS_HWINFO_SIZE		0x00000040	/* size	  of HW Info block */
+#define CONFIG_SYS_HWINFO_MAGIC	0x54514D38	/* 'TQM8' */
 
 /*-----------------------------------------------------------------------
  * Cache Configuration
  */
-#define CFG_CACHELINE_SIZE	16	/* For all MPC8xx CPUs			*/
+#define CONFIG_SYS_CACHELINE_SIZE	16	/* For all MPC8xx CPUs			*/
 #if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT	4	/* log base 2 of the above value	*/
+#define CONFIG_SYS_CACHELINE_SHIFT	4	/* log base 2 of the above value	*/
 #endif
 
 /*-----------------------------------------------------------------------
@@ -264,10 +264,10 @@
  * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze
  */
 #if defined(CONFIG_WATCHDOG)
-#define CFG_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
+#define CONFIG_SYS_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
 			 SYPCR_SWE  | SYPCR_SWRI| SYPCR_SWP)
 #else
-#define CFG_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
+#define CONFIG_SYS_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
 #endif
 
 /*-----------------------------------------------------------------------
@@ -276,9 +276,9 @@
  * PCMCIA config., multi-function pin tri-state
  */
 #ifndef CONFIG_CAN_DRIVER
-#define CFG_SIUMCR	(SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_MLRC01)
+#define CONFIG_SYS_SIUMCR	(SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_MLRC01)
 #else	/* we must activate GPL5 in the SIUMCR for CAN */
-#define CFG_SIUMCR	(SIUMCR_DBGC11 | SIUMCR_DBPC00 | SIUMCR_MLRC01)
+#define CONFIG_SYS_SIUMCR	(SIUMCR_DBGC11 | SIUMCR_DBPC00 | SIUMCR_MLRC01)
 #endif	/* CONFIG_CAN_DRIVER */
 
 /*-----------------------------------------------------------------------
@@ -286,20 +286,20 @@
  *-----------------------------------------------------------------------
  * Clear Reference Interrupt Status, Timebase freezing enabled
  */
-#define CFG_TBSCR	(TBSCR_REFA | TBSCR_REFB | TBSCR_TBF)
+#define CONFIG_SYS_TBSCR	(TBSCR_REFA | TBSCR_REFB | TBSCR_TBF)
 
 /*-----------------------------------------------------------------------
  * RTCSC - Real-Time Clock Status and Control Register		11-27
  *-----------------------------------------------------------------------
  */
-#define CFG_RTCSC	(RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE)
+#define CONFIG_SYS_RTCSC	(RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE)
 
 /*-----------------------------------------------------------------------
  * PISCR - Periodic Interrupt Status and Control		11-31
  *-----------------------------------------------------------------------
  * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
  */
-#define CFG_PISCR	(PISCR_PS | PISCR_PITF)
+#define CONFIG_SYS_PISCR	(PISCR_PS | PISCR_PITF)
 
 /*-----------------------------------------------------------------------
  * PLPRCR - PLL, Low-Power, and Reset Control Register		15-30
@@ -309,7 +309,7 @@
  *
  * If this is a 80 MHz CPU, set PLL multiplication factor to 5 (5*16=80)!
  */
-#define CFG_PLPRCR	(PLPRCR_SPLSS | PLPRCR_TEXPS | PLPRCR_TMIST)
+#define CONFIG_SYS_PLPRCR	(PLPRCR_SPLSS | PLPRCR_TEXPS | PLPRCR_TMIST)
 
 /*-----------------------------------------------------------------------
  * SCCR - System Clock and reset Control Register		15-27
@@ -318,7 +318,7 @@
  * power management and some other internal clocks
  */
 #define SCCR_MASK	SCCR_EBDF11
-#define CFG_SCCR	(SCCR_COM00   | SCCR_DFSYNC00 | SCCR_DFBRG00  | \
+#define CONFIG_SYS_SCCR	(SCCR_COM00   | SCCR_DFSYNC00 | SCCR_DFBRG00  | \
 			 SCCR_DFNL000 | SCCR_DFNH000  | SCCR_DFLCD000 | \
 			 SCCR_DFALCD00)
 
@@ -327,14 +327,14 @@
  *-----------------------------------------------------------------------
  *
  */
-#define CFG_PCMCIA_MEM_ADDR	(0xE0100000)
-#define CFG_PCMCIA_MEM_SIZE	( 64 << 20 )
-#define CFG_PCMCIA_DMA_ADDR	(0xE4100000)
-#define CFG_PCMCIA_DMA_SIZE	( 64 << 20 )
-#define CFG_PCMCIA_ATTRB_ADDR	(0xE8100000)
-#define CFG_PCMCIA_ATTRB_SIZE	( 64 << 20 )
-#define CFG_PCMCIA_IO_ADDR	(0xEC100000)
-#define CFG_PCMCIA_IO_SIZE	( 64 << 20 )
+#define CONFIG_SYS_PCMCIA_MEM_ADDR	(0xE0100000)
+#define CONFIG_SYS_PCMCIA_MEM_SIZE	( 64 << 20 )
+#define CONFIG_SYS_PCMCIA_DMA_ADDR	(0xE4100000)
+#define CONFIG_SYS_PCMCIA_DMA_SIZE	( 64 << 20 )
+#define CONFIG_SYS_PCMCIA_ATTRB_ADDR	(0xE8100000)
+#define CONFIG_SYS_PCMCIA_ATTRB_SIZE	( 64 << 20 )
+#define CONFIG_SYS_PCMCIA_IO_ADDR	(0xEC100000)
+#define CONFIG_SYS_PCMCIA_IO_SIZE	( 64 << 20 )
 #define PCMCIA_MEM_WIN_NO	5
 #define NSCU_OE_INV		1		/* PCMCIA_GCRX_CXOE is inverted */
 
@@ -351,28 +351,28 @@
 #define CONFIG_IDE_LED		1	/* LED   for ide supported	*/
 #endif
 
-#define CFG_IDE_MAXBUS		1	/* max. 1 IDE bus		*/
-#define CFG_IDE_MAXDEVICE	1	/* max. 1 drive per IDE bus	*/
+#define CONFIG_SYS_IDE_MAXBUS		1	/* max. 1 IDE bus		*/
+#define CONFIG_SYS_IDE_MAXDEVICE	1	/* max. 1 drive per IDE bus	*/
 
-#define CFG_ATA_IDE0_OFFSET	0x0000
+#define CONFIG_SYS_ATA_IDE0_OFFSET	0x0000
 
-#define CFG_ATA_BASE_ADDR	CFG_PCMCIA_MEM_ADDR
+#define CONFIG_SYS_ATA_BASE_ADDR	CONFIG_SYS_PCMCIA_MEM_ADDR
 
 /* Offset for data I/O			*/
-#define CFG_ATA_DATA_OFFSET	(CFG_PCMCIA_MEM_SIZE + 0x320)
+#define CONFIG_SYS_ATA_DATA_OFFSET	(CONFIG_SYS_PCMCIA_MEM_SIZE + 0x320)
 
 /* Offset for normal register accesses	*/
-#define CFG_ATA_REG_OFFSET	(2 * CFG_PCMCIA_MEM_SIZE + 0x320)
+#define CONFIG_SYS_ATA_REG_OFFSET	(2 * CONFIG_SYS_PCMCIA_MEM_SIZE + 0x320)
 
 /* Offset for alternate registers	*/
-#define CFG_ATA_ALT_OFFSET	0x0100
+#define CONFIG_SYS_ATA_ALT_OFFSET	0x0100
 
 /*-----------------------------------------------------------------------
  *
  *-----------------------------------------------------------------------
  *
  */
-#define CFG_DER 0
+#define CONFIG_SYS_DER 0
 
 /*
  * Init Memory Controller:
@@ -387,22 +387,22 @@
  * restrict access enough to keep SRAM working (if any)
  * but not too much to meddle with FLASH accesses
  */
-#define CFG_REMAP_OR_AM		0x80000000	/* OR addr mask */
-#define CFG_PRELIM_OR_AM	0xE0000000	/* OR addr mask */
+#define CONFIG_SYS_REMAP_OR_AM		0x80000000	/* OR addr mask */
+#define CONFIG_SYS_PRELIM_OR_AM	0xE0000000	/* OR addr mask */
 
 /*
  * FLASH timing:
  */
-#define CFG_OR_TIMING_FLASH	(OR_ACS_DIV1  | OR_TRLX | OR_CSNT_SAM | \
+#define CONFIG_SYS_OR_TIMING_FLASH	(OR_ACS_DIV1  | OR_TRLX | OR_CSNT_SAM | \
 				 OR_SCY_3_CLK | OR_EHTR | OR_BI)
 
-#define CFG_OR0_REMAP	(CFG_REMAP_OR_AM  | CFG_OR_TIMING_FLASH)
-#define CFG_OR0_PRELIM	(CFG_PRELIM_OR_AM | CFG_OR_TIMING_FLASH)
-#define CFG_BR0_PRELIM	((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_V )
+#define CONFIG_SYS_OR0_REMAP	(CONFIG_SYS_REMAP_OR_AM  | CONFIG_SYS_OR_TIMING_FLASH)
+#define CONFIG_SYS_OR0_PRELIM	(CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_FLASH)
+#define CONFIG_SYS_BR0_PRELIM	((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_V )
 
-#define CFG_OR1_REMAP	CFG_OR0_REMAP
-#define CFG_OR1_PRELIM	CFG_OR0_PRELIM
-#define CFG_BR1_PRELIM	((FLASH_BASE1_PRELIM & BR_BA_MSK) | BR_V )
+#define CONFIG_SYS_OR1_REMAP	CONFIG_SYS_OR0_REMAP
+#define CONFIG_SYS_OR1_PRELIM	CONFIG_SYS_OR0_PRELIM
+#define CONFIG_SYS_BR1_PRELIM	((FLASH_BASE1_PRELIM & BR_BA_MSK) | BR_V )
 
 /*
  * BR2/3 and OR2/3 (SDRAM)
@@ -413,19 +413,19 @@
 #define SDRAM_MAX_SIZE		0x04000000	/* max 64 MB per bank	*/
 
 /* SDRAM timing: Multiplexed addresses, GPL5 output to GPL5_A (don't care)	*/
-#define CFG_OR_TIMING_SDRAM	0x00000A00
+#define CONFIG_SYS_OR_TIMING_SDRAM	0x00000A00
 
-#define CFG_OR2_PRELIM	(CFG_PRELIM_OR_AM | CFG_OR_TIMING_SDRAM )
-#define CFG_BR2_PRELIM	((SDRAM_BASE2_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
+#define CONFIG_SYS_OR2_PRELIM	(CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_SDRAM )
+#define CONFIG_SYS_BR2_PRELIM	((SDRAM_BASE2_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
 
 #ifndef CONFIG_CAN_DRIVER
-#define CFG_OR3_PRELIM	CFG_OR2_PRELIM
-#define CFG_BR3_PRELIM	((SDRAM_BASE3_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
+#define CONFIG_SYS_OR3_PRELIM	CONFIG_SYS_OR2_PRELIM
+#define CONFIG_SYS_BR3_PRELIM	((SDRAM_BASE3_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
 #else	/* CAN uses CS3#, so we can have only one SDRAM bank anyway */
-#define CFG_CAN_BASE		0xC0000000	/* CAN mapped at 0xC0000000	*/
-#define CFG_CAN_OR_AM		0xFFFF8000	/* 32 kB address mask		*/
-#define CFG_OR3_CAN		(CFG_CAN_OR_AM | OR_G5LA | OR_BI)
-#define CFG_BR3_CAN		((CFG_CAN_BASE & BR_BA_MSK) | \
+#define CONFIG_SYS_CAN_BASE		0xC0000000	/* CAN mapped at 0xC0000000	*/
+#define CONFIG_SYS_CAN_OR_AM		0xFFFF8000	/* 32 kB address mask		*/
+#define CONFIG_SYS_OR3_CAN		(CONFIG_SYS_CAN_OR_AM | OR_G5LA | OR_BI)
+#define CONFIG_SYS_BR3_CAN		((CONFIG_SYS_CAN_BASE & BR_BA_MSK) | \
 					BR_PS_8 | BR_MS_UPMB | BR_V )
 #endif	/* CONFIG_CAN_DRIVER */
 
@@ -456,34 +456,34 @@
  * 80 Mhz => 80.000.000 / Divider = 156
  */
 
-#define CFG_PTA_PER_CLK	((4096 * 32 * 1000) / (4 * 64))
-#define CFG_MAMR_PTA	98
+#define CONFIG_SYS_PTA_PER_CLK	((4096 * 32 * 1000) / (4 * 64))
+#define CONFIG_SYS_MAMR_PTA	98
 
 /*
  * For 16 MBit, refresh rates could be 31.3 us
  * (= 64 ms / 2K = 125 / quad bursts).
  * For a simpler initialization, 15.6 us is used instead.
  *
- * #define CFG_MPTPR_2BK_2K	MPTPR_PTP_DIV32		for 2 banks
- * #define CFG_MPTPR_1BK_2K	MPTPR_PTP_DIV64		for 1 bank
+ * #define CONFIG_SYS_MPTPR_2BK_2K	MPTPR_PTP_DIV32		for 2 banks
+ * #define CONFIG_SYS_MPTPR_1BK_2K	MPTPR_PTP_DIV64		for 1 bank
  */
-#define CFG_MPTPR_2BK_4K	MPTPR_PTP_DIV16		/* setting for 2 banks	*/
-#define CFG_MPTPR_1BK_4K	MPTPR_PTP_DIV32		/* setting for 1 bank	*/
+#define CONFIG_SYS_MPTPR_2BK_4K	MPTPR_PTP_DIV16		/* setting for 2 banks	*/
+#define CONFIG_SYS_MPTPR_1BK_4K	MPTPR_PTP_DIV32		/* setting for 1 bank	*/
 
 /* refresh rate 7.8 us (= 64 ms / 8K = 31.2 / quad bursts) for 256 MBit		*/
-#define CFG_MPTPR_2BK_8K	MPTPR_PTP_DIV8		/* setting for 2 banks	*/
-#define CFG_MPTPR_1BK_8K	MPTPR_PTP_DIV16		/* setting for 1 bank	*/
+#define CONFIG_SYS_MPTPR_2BK_8K	MPTPR_PTP_DIV8		/* setting for 2 banks	*/
+#define CONFIG_SYS_MPTPR_1BK_8K	MPTPR_PTP_DIV16		/* setting for 1 bank	*/
 
 /*
  * MAMR settings for SDRAM
  */
 
 /* 8 column SDRAM */
-#define CFG_MAMR_8COL	((CFG_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
+#define CONFIG_SYS_MAMR_8COL	((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
 			 MAMR_AMA_TYPE_0 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A11 |	\
 			 MAMR_RLFA_1X	 | MAMR_WLFA_1X	   | MAMR_TLFA_4X)
 /* 9 column SDRAM */
-#define CFG_MAMR_9COL	((CFG_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
+#define CONFIG_SYS_MAMR_9COL	((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
 			 MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 |	\
 			 MAMR_RLFA_1X	 | MAMR_WLFA_1X	   | MAMR_TLFA_4X)
 
diff --git a/include/configs/HUB405.h b/include/configs/HUB405.h
index a389d582d..b3c7046fc 100644
--- a/include/configs/HUB405.h
+++ b/include/configs/HUB405.h
@@ -52,8 +52,9 @@
 
 #define CONFIG_PREBOOT                  /* enable preboot variable      */
 
-#define CFG_LOADS_BAUD_CHANGE	1	/* allow baudrate change	*/
+#define CONFIG_SYS_LOADS_BAUD_CHANGE	1	/* allow baudrate change	*/
 
+#define CONFIG_PPC4xx_EMAC
 #define CONFIG_MII		1	/* MII PHY management		*/
 #define CONFIG_PHY_ADDR		0	/* PHY address			*/
 #define CONFIG_LXT971_NO_SLEEP  1       /* disable sleep mode in LXT971 */
@@ -92,50 +93,50 @@
 /*
  * Miscellaneous configurable options
  */
-#define CFG_LONGHELP			/* undef to save memory		*/
-#define CFG_PROMPT	"=> "		/* Monitor Command Prompt	*/
+#define CONFIG_SYS_LONGHELP			/* undef to save memory		*/
+#define CONFIG_SYS_PROMPT	"=> "		/* Monitor Command Prompt	*/
 
-#undef	CFG_HUSH_PARSER			/* use "hush" command parser	*/
-#ifdef	CFG_HUSH_PARSER
-#define CFG_PROMPT_HUSH_PS2	"> "
+#undef	CONFIG_SYS_HUSH_PARSER			/* use "hush" command parser	*/
+#ifdef	CONFIG_SYS_HUSH_PARSER
+#define CONFIG_SYS_PROMPT_HUSH_PS2	"> "
 #endif
 
 #if defined(CONFIG_CMD_KGDB)
-#define CFG_CBSIZE	1024		/* Console I/O Buffer Size	*/
+#define CONFIG_SYS_CBSIZE	1024		/* Console I/O Buffer Size	*/
 #else
-#define CFG_CBSIZE	256		/* Console I/O Buffer Size	*/
+#define CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size	*/
 #endif
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define CFG_MAXARGS	16		/* max number of command args	*/
-#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS	16		/* max number of command args	*/
+#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
 
-#define CFG_DEVICE_NULLDEV	1	/* include nulldev device	*/
+#define CONFIG_SYS_DEVICE_NULLDEV	1	/* include nulldev device	*/
 
-#define CFG_CONSOLE_INFO_QUIET	1	/* don't print console @ startup*/
+#define CONFIG_SYS_CONSOLE_INFO_QUIET	1	/* don't print console @ startup*/
 
-#define CFG_MEMTEST_START	0x0400000	/* memtest works on	*/
-#define CFG_MEMTEST_END		0x0C00000	/* 4 ... 12 MB in DRAM	*/
+#define CONFIG_SYS_MEMTEST_START	0x0400000	/* memtest works on	*/
+#define CONFIG_SYS_MEMTEST_END		0x0C00000	/* 4 ... 12 MB in DRAM	*/
 
-#undef	CFG_EXT_SERIAL_CLOCK	       /* no external serial clock used */
-#define CFG_IGNORE_405_UART_ERRATA_59	/* ignore ppc405gp errata #59	*/
-#define CFG_BASE_BAUD	    691200
+#undef	CONFIG_SYS_EXT_SERIAL_CLOCK	       /* no external serial clock used */
+#define CONFIG_SYS_IGNORE_405_UART_ERRATA_59	/* ignore ppc405gp errata #59	*/
+#define CONFIG_SYS_BASE_BAUD	    691200
 #undef	CONFIG_UART1_CONSOLE		/* define for uart1 as console	*/
 
 /* The following table includes the supported baudrates */
-#define CFG_BAUDRATE_TABLE	\
+#define CONFIG_SYS_BAUDRATE_TABLE	\
 	{ 300, 600, 1200, 2400, 4800, 9600, 19200, 38400,     \
 	 57600, 115200, 230400, 460800, 921600 }
 
-#define CFG_LOAD_ADDR	0x100000	/* default load address */
-#define CFG_EXTBDINFO	1		/* To use extended board_into (bd_t) */
+#define CONFIG_SYS_LOAD_ADDR	0x100000	/* default load address */
+#define CONFIG_SYS_EXTBDINFO	1		/* To use extended board_into (bd_t) */
 
-#define CFG_HZ		1000		/* decrementer freq: 1 ms ticks */
+#define CONFIG_SYS_HZ		1000		/* decrementer freq: 1 ms ticks */
 
 #define CONFIG_ZERO_BOOTDELAY_CHECK	/* check for keypress on bootdelay==0 */
 
 #define CONFIG_VERSION_VARIABLE 1	/* include version env variable */
 
-#define CFG_RX_ETH_BUFFER	16	/* use 16 rx buffer on 405 emac */
+#define CONFIG_SYS_RX_ETH_BUFFER	16	/* use 16 rx buffer on 405 emac */
 
 /* Ethernet stuff */
 #define CONFIG_ENV_OVERWRITE /* Let the user to change the Ethernet MAC addresses */
@@ -147,18 +148,18 @@
  * NAND-FLASH stuff
  *-----------------------------------------------------------------------
  */
-#define CFG_NAND_BASE_LIST	{ CFG_NAND_BASE }
+#define CONFIG_SYS_NAND_BASE_LIST	{ CONFIG_SYS_NAND_BASE }
 #define NAND_MAX_CHIPS          1
-#define CFG_MAX_NAND_DEVICE	1         /* Max number of NAND devices */
+#define CONFIG_SYS_MAX_NAND_DEVICE	1         /* Max number of NAND devices */
 #define NAND_BIG_DELAY_US	25
 
-#define CFG_NAND_CE             (0x80000000 >> 1)   /* our CE is GPIO1  */
-#define CFG_NAND_RDY            (0x80000000 >> 4)   /* our RDY is GPIO4 */
-#define CFG_NAND_CLE            (0x80000000 >> 2)   /* our CLE is GPIO2 */
-#define CFG_NAND_ALE            (0x80000000 >> 3)   /* our ALE is GPIO3 */
+#define CONFIG_SYS_NAND_CE             (0x80000000 >> 1)   /* our CE is GPIO1  */
+#define CONFIG_SYS_NAND_RDY            (0x80000000 >> 4)   /* our RDY is GPIO4 */
+#define CONFIG_SYS_NAND_CLE            (0x80000000 >> 2)   /* our CLE is GPIO2 */
+#define CONFIG_SYS_NAND_ALE            (0x80000000 >> 3)   /* our ALE is GPIO3 */
 
-#define CFG_NAND_SKIP_BAD_DOT_I 1       /* ".i" read skips bad blocks   */
-#define CFG_NAND_QUIET          1
+#define CONFIG_SYS_NAND_SKIP_BAD_DOT_I 1       /* ".i" read skips bad blocks   */
+#define CONFIG_SYS_NAND_QUIET          1
 
 /*-----------------------------------------------------------------------
  * PCI stuff
@@ -175,87 +176,86 @@
 
 #undef	CONFIG_PCI_SCAN_SHOW		/* print pci devices @ startup	*/
 
-#define CFG_PCI_SUBSYS_VENDORID 0x12FE	/* PCI Vendor ID: esd gmbh	*/
-#define CFG_PCI_SUBSYS_DEVICEID 0x0405	/* PCI Device ID: CPCI-405	*/
-#define CFG_PCI_CLASSCODE	0x0b20	/* PCI Class Code: Processor/PPC*/
-#define CFG_PCI_PTM1LA	0x00000000	/* point to sdram		*/
-#define CFG_PCI_PTM1MS	0xfc000001	/* 64MB, enable hard-wired to 1 */
-#define CFG_PCI_PTM1PCI 0x00000000	/* Host: use this pci address	*/
-#define CFG_PCI_PTM2LA	0xffc00000	/* point to flash		*/
-#define CFG_PCI_PTM2MS	0xffc00001	/* 4MB, enable			*/
-#define CFG_PCI_PTM2PCI 0x04000000	/* Host: use this pci address	*/
+#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x12FE	/* PCI Vendor ID: esd gmbh	*/
+#define CONFIG_SYS_PCI_SUBSYS_DEVICEID 0x0405	/* PCI Device ID: CPCI-405	*/
+#define CONFIG_SYS_PCI_CLASSCODE	0x0b20	/* PCI Class Code: Processor/PPC*/
+#define CONFIG_SYS_PCI_PTM1LA	0x00000000	/* point to sdram		*/
+#define CONFIG_SYS_PCI_PTM1MS	0xfc000001	/* 64MB, enable hard-wired to 1 */
+#define CONFIG_SYS_PCI_PTM1PCI 0x00000000	/* Host: use this pci address	*/
+#define CONFIG_SYS_PCI_PTM2LA	0xffc00000	/* point to flash		*/
+#define CONFIG_SYS_PCI_PTM2MS	0xffc00001	/* 4MB, enable			*/
+#define CONFIG_SYS_PCI_PTM2PCI 0x04000000	/* Host: use this pci address	*/
 
 /*-----------------------------------------------------------------------
  * Start addresses for the final memory configuration
  * (Set up by the startup code)
- * Please note that CFG_SDRAM_BASE _must_ start at 0
+ * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
  */
-#define CFG_SDRAM_BASE		0x00000000
-#define CFG_FLASH_BASE		0xFFFC0000
-#define CFG_MONITOR_BASE	CFG_FLASH_BASE
-#define CFG_MONITOR_LEN		(256 * 1024)	/* Reserve 256 kB for Monitor	*/
-#define CFG_MALLOC_LEN		(256 * 1024)	/* Reserve 256 kB for malloc()	*/
+#define CONFIG_SYS_SDRAM_BASE		0x00000000
+#define CONFIG_SYS_FLASH_BASE		0xFFFC0000
+#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_FLASH_BASE
+#define CONFIG_SYS_MONITOR_LEN		(256 * 1024)	/* Reserve 256 kB for Monitor	*/
+#define CONFIG_SYS_MALLOC_LEN		(256 * 1024)	/* Reserve 256 kB for malloc()	*/
 
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
+#define CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
 /*-----------------------------------------------------------------------
  * FLASH organization
  */
-#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
-#define CFG_MAX_FLASH_SECT	256	/* max number of sectors on one chip	*/
+#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
+#define CONFIG_SYS_MAX_FLASH_SECT	256	/* max number of sectors on one chip	*/
 
-#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
-#define CFG_FLASH_WRITE_TOUT	1000	/* Timeout for Flash Write (in ms)	*/
+#define CONFIG_SYS_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
+#define CONFIG_SYS_FLASH_WRITE_TOUT	1000	/* Timeout for Flash Write (in ms)	*/
 
-#define CFG_FLASH_WORD_SIZE	unsigned short	/* flash word size (width)	*/
-#define CFG_FLASH_ADDR0		0x5555	/* 1st address for flash config cycles	*/
-#define CFG_FLASH_ADDR1		0x2AAA	/* 2nd address for flash config cycles	*/
+#define CONFIG_SYS_FLASH_WORD_SIZE	unsigned short	/* flash word size (width)	*/
+#define CONFIG_SYS_FLASH_ADDR0		0x5555	/* 1st address for flash config cycles	*/
+#define CONFIG_SYS_FLASH_ADDR1		0x2AAA	/* 2nd address for flash config cycles	*/
 /*
  * The following defines are added for buggy IOP480 byte interface.
  * All other boards should use the standard values (CPCI405 etc.)
  */
-#define CFG_FLASH_READ0		0x0000	/* 0 is standard			*/
-#define CFG_FLASH_READ1		0x0001	/* 1 is standard			*/
-#define CFG_FLASH_READ2		0x0002	/* 2 is standard			*/
+#define CONFIG_SYS_FLASH_READ0		0x0000	/* 0 is standard			*/
+#define CONFIG_SYS_FLASH_READ1		0x0001	/* 1 is standard			*/
+#define CONFIG_SYS_FLASH_READ2		0x0002	/* 2 is standard			*/
 
-#define CFG_FLASH_EMPTY_INFO		/* print 'E' for empty sector on flinfo */
+#define CONFIG_SYS_FLASH_EMPTY_INFO		/* print 'E' for empty sector on flinfo */
 
 #if 0 /* test-only */
-#define CFG_JFFS2_FIRST_BANK	0	    /* use for JFFS2 */
-#define CFG_JFFS2_NUM_BANKS	1	    /* ! second bank contains U-Boot */
+#define CONFIG_SYS_JFFS2_FIRST_BANK	0	    /* use for JFFS2 */
+#define CONFIG_SYS_JFFS2_NUM_BANKS	1	    /* ! second bank contains U-Boot */
 #endif
 
 /*-----------------------------------------------------------------------
  * Environment Variable setup
  */
-#define CFG_ENV_IS_IN_EEPROM	1	/* use EEPROM for environment vars */
-#define CFG_ENV_OFFSET		0x100	/* environment starts at the beginning of the EEPROM */
-#define CFG_ENV_SIZE		0x700	/* 2048 bytes may be used for env vars*/
+#define CONFIG_ENV_IS_IN_EEPROM	1	/* use EEPROM for environment vars */
+#define CONFIG_ENV_OFFSET		0x100	/* environment starts at the beginning of the EEPROM */
+#define CONFIG_ENV_SIZE		0x700	/* 2048 bytes may be used for env vars*/
 				   /* total size of a CAT24WC16 is 2048 bytes */
 
-#define CFG_NVRAM_BASE_ADDR	0xF0000500		/* NVRAM base address	*/
-#define CFG_NVRAM_SIZE		242			/* NVRAM size		*/
+#define CONFIG_SYS_NVRAM_BASE_ADDR	0xF0000500		/* NVRAM base address	*/
+#define CONFIG_SYS_NVRAM_SIZE		242			/* NVRAM size		*/
 
 /*-----------------------------------------------------------------------
  * I2C EEPROM (CAT24WC16) for environment
  */
 #define CONFIG_HARD_I2C			/* I2c with hardware support */
-#define CFG_I2C_SPEED		400000	/* I2C speed and slave address */
-#define CFG_I2C_SLAVE		0x7F
+#define CONFIG_SYS_I2C_SPEED		400000	/* I2C speed and slave address */
+#define CONFIG_SYS_I2C_SLAVE		0x7F
 
-#define CFG_I2C_EEPROM_ADDR	0x50	/* EEPROM CAT28WC08		*/
-#define CFG_I2C_EEPROM_ADDR_LEN 1	/* Bytes of address		*/
+#define CONFIG_SYS_I2C_EEPROM_ADDR	0x50	/* EEPROM CAT28WC08		*/
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1	/* Bytes of address		*/
 /* mask of address bits that overflow into the "EEPROM chip address"	*/
-#define CFG_I2C_EEPROM_ADDR_OVERFLOW	0x07
-#define CFG_EEPROM_PAGE_WRITE_BITS 4	/* The Catalyst CAT24WC08 has	*/
+#define CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW	0x07
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 4	/* The Catalyst CAT24WC08 has	*/
 					/* 16 byte page write mode using*/
 					/* last 4 bits of the address	*/
-#define CFG_EEPROM_PAGE_WRITE_DELAY_MS	10   /* and takes up to 10 msec */
-#define CFG_EEPROM_PAGE_WRITE_ENABLE
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	10   /* and takes up to 10 msec */
 
 /*
  * Init Memory Controller:
@@ -270,57 +270,57 @@
  */
 
 /* Memory Bank 0 (Flash Bank 0, NOR-FLASH) initialization			*/
-#define CFG_EBC_PB0AP		0x92015480
-/*#define CFG_EBC_PB0AP		  0x08055880  /XXX* TWT=16,CSN=1,OEN=1,WBN=1,WBF=1,TH=4,SOR=1 */
-#define CFG_EBC_PB0CR		0xFFC5A000  /* BAS=0xFFC,BS=4MB,BU=R/W,BW=16bit */
+#define CONFIG_SYS_EBC_PB0AP		0x92015480
+/*#define CONFIG_SYS_EBC_PB0AP		  0x08055880  /XXX* TWT=16,CSN=1,OEN=1,WBN=1,WBF=1,TH=4,SOR=1 */
+#define CONFIG_SYS_EBC_PB0CR		0xFFC5A000  /* BAS=0xFFC,BS=4MB,BU=R/W,BW=16bit */
 
 /* Memory Bank 1 (Flash Bank 1, NAND-FLASH) initialization			*/
-#define CFG_EBC_PB1AP		0x92015480
-#define CFG_EBC_PB1CR		0xF4018000  /* BAS=0xF40,BS=1MB,BU=R/W,BW=8bit	*/
+#define CONFIG_SYS_EBC_PB1AP		0x92015480
+#define CONFIG_SYS_EBC_PB1CR		0xF4018000  /* BAS=0xF40,BS=1MB,BU=R/W,BW=8bit	*/
 
 /* Memory Bank 2 (8 Bit Peripheral: UART) initialization			*/
 #if 0
-#define CFG_EBC_PB2AP		0x010053C0  /* BWT=2,WBN=1,WBF=1,TH=1,RE=1,SOR=1,BEM=1 */
-#define CFG_EBC_PB2CR		0xF0018000  /* BAS=0xF00,BS=1MB,BU=R/W,BW=8bit	*/
+#define CONFIG_SYS_EBC_PB2AP		0x010053C0  /* BWT=2,WBN=1,WBF=1,TH=1,RE=1,SOR=1,BEM=1 */
+#define CONFIG_SYS_EBC_PB2CR		0xF0018000  /* BAS=0xF00,BS=1MB,BU=R/W,BW=8bit	*/
 #else
-#define CFG_EBC_PB2AP		0x92015480
-#define CFG_EBC_PB2CR		0xF0018000  /* BAS=0xF00,BS=1MB,BU=R/W,BW=8bit	*/
+#define CONFIG_SYS_EBC_PB2AP		0x92015480
+#define CONFIG_SYS_EBC_PB2CR		0xF0018000  /* BAS=0xF00,BS=1MB,BU=R/W,BW=8bit	*/
 #endif
 
 #define DUART0_BA	0xF0000000	    /* DUART Base Address		*/
 #define DUART1_BA	0xF0000008	    /* DUART Base Address		*/
 #define DUART2_BA	0xF0000010	    /* DUART Base Address		*/
 #define DUART3_BA	0xF0000018	    /* DUART Base Address		*/
-#define CFG_NAND_BASE	0xF4000000
+#define CONFIG_SYS_NAND_BASE	0xF4000000
 
 /*-----------------------------------------------------------------------
  * FPGA stuff
  */
-#define CFG_FPGA_SPARTAN2	1	    /* using Xilinx Spartan 2 now    */
-#define CFG_FPGA_MAX_SIZE	128*1024    /* 128kByte is enough for XC2S50E*/
+#define CONFIG_SYS_FPGA_SPARTAN2	1	    /* using Xilinx Spartan 2 now    */
+#define CONFIG_SYS_FPGA_MAX_SIZE	128*1024    /* 128kByte is enough for XC2S50E*/
 
 /* FPGA program pin configuration */
-#define CFG_FPGA_PRG		0x04000000  /* FPGA program pin (ppc output) */
-#define CFG_FPGA_CLK		0x02000000  /* FPGA clk pin (ppc output)     */
-#define CFG_FPGA_DATA		0x01000000  /* FPGA data pin (ppc output)    */
-#define CFG_FPGA_INIT		0x00010000  /* FPGA init pin (ppc input)     */
-#define CFG_FPGA_DONE		0x00008000  /* FPGA done pin (ppc input)     */
+#define CONFIG_SYS_FPGA_PRG		0x04000000  /* FPGA program pin (ppc output) */
+#define CONFIG_SYS_FPGA_CLK		0x02000000  /* FPGA clk pin (ppc output)     */
+#define CONFIG_SYS_FPGA_DATA		0x01000000  /* FPGA data pin (ppc output)    */
+#define CONFIG_SYS_FPGA_INIT		0x00010000  /* FPGA init pin (ppc input)     */
+#define CONFIG_SYS_FPGA_DONE		0x00008000  /* FPGA done pin (ppc input)     */
 
 /*-----------------------------------------------------------------------
  * Definitions for initial stack pointer and data area (in data cache)
  */
 /* use on chip memory ( OCM ) for temperary stack until sdram is tested */
-#define CFG_TEMP_STACK_OCM	  1
+#define CONFIG_SYS_TEMP_STACK_OCM	  1
 
 /* On Chip Memory location */
-#define CFG_OCM_DATA_ADDR	0xF8000000
-#define CFG_OCM_DATA_SIZE	0x1000
-#define CFG_INIT_RAM_ADDR	CFG_OCM_DATA_ADDR /* inside of SDRAM		*/
-#define CFG_INIT_RAM_END	CFG_OCM_DATA_SIZE /* End of used area in RAM	*/
+#define CONFIG_SYS_OCM_DATA_ADDR	0xF8000000
+#define CONFIG_SYS_OCM_DATA_SIZE	0x1000
+#define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_OCM_DATA_ADDR /* inside of SDRAM		*/
+#define CONFIG_SYS_INIT_RAM_END	CONFIG_SYS_OCM_DATA_SIZE /* End of used area in RAM	*/
 
-#define CFG_GBL_DATA_SIZE      128  /* size in bytes reserved for initial data */
-#define CFG_GBL_DATA_OFFSET    (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_GBL_DATA_SIZE      128  /* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET    (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
 /*-----------------------------------------------------------------------
  * Definitions for GPIO setup (PPC405EP specific)
@@ -334,19 +334,19 @@
  * GPIO0[28-29] - UART1 data signal input/output
  * GPIO0[30-31] - EMAC0 and EMAC1 reject packet inputs
  */
-#define CFG_GPIO0_OSRH		0x40000550
-#define CFG_GPIO0_OSRL		0x00000110
-#define CFG_GPIO0_ISR1H		0x00000000
-#define CFG_GPIO0_ISR1L		0x15555445
-#define CFG_GPIO0_TSRH		0x00000000
-#define CFG_GPIO0_TSRL		0x00000000
-#define CFG_GPIO0_TCR		0xF7FE0014
-
-#define CFG_DUART_RST           (0x80000000 >> 14)
-#define CFG_UART2_RS232         (0x80000000 >> 5)
-#define CFG_UART3_RS232         (0x80000000 >> 6)
-#define CFG_UART4_RS232         (0x80000000 >> 7)
-#define CFG_UART5_RS232         (0x80000000 >> 8)
+#define CONFIG_SYS_GPIO0_OSRH		0x40000550
+#define CONFIG_SYS_GPIO0_OSRL		0x00000110
+#define CONFIG_SYS_GPIO0_ISR1H		0x00000000
+#define CONFIG_SYS_GPIO0_ISR1L		0x15555445
+#define CONFIG_SYS_GPIO0_TSRH		0x00000000
+#define CONFIG_SYS_GPIO0_TSRL		0x00000000
+#define CONFIG_SYS_GPIO0_TCR		0xF7FE0014
+
+#define CONFIG_SYS_DUART_RST           (0x80000000 >> 14)
+#define CONFIG_SYS_UART2_RS232         (0x80000000 >> 5)
+#define CONFIG_SYS_UART3_RS232         (0x80000000 >> 6)
+#define CONFIG_SYS_UART4_RS232         (0x80000000 >> 7)
+#define CONFIG_SYS_UART5_RS232         (0x80000000 >> 8)
 
 /*
  * Internal Definitions
diff --git a/include/configs/IAD210.h b/include/configs/IAD210.h
index 87827ead1..ca488c6f8 100644
--- a/include/configs/IAD210.h
+++ b/include/configs/IAD210.h
@@ -97,12 +97,12 @@
 # undef  CONFIG_SCC1_ENET		/* disable SCC1 ethernet */
 # define CONFIG_FEC_ENET    1	/* use FEC ethernet  */
 # define CONFIG_MII         1
-# define CFG_DISCOVER_PHY   1
+# define CONFIG_SYS_DISCOVER_PHY   1
 # define CONFIG_FEC_UTOPIA  1
 # define CONFIG_ETHADDR     08:00:06:26:A2:6D
 # define CONFIG_IPADDR      192.168.28.128
 # define CONFIG_SERVERIP    139.10.137.138
-# define CFG_DISCOVER_PHY   1
+# define CONFIG_SYS_DISCOVER_PHY   1
 
 #define CONFIG_MAC_PARTITION
 #define CONFIG_DOS_PARTITION
@@ -110,9 +110,9 @@
 /* enable I2C and select the hardware/software driver */
 #undef  CONFIG_HARD_I2C			/* I2C with hardware support    */
 #define CONFIG_SOFT_I2C		1	/* I2C bit-banged               */
-# define CFG_I2C_SPEED		50000
-# define CFG_I2C_SLAVE		0xDD
-# define CFG_I2C_EEPROM_ADDR	0x50
+# define CONFIG_SYS_I2C_SPEED		50000
+# define CONFIG_SYS_I2C_SLAVE		0xDD
+# define CONFIG_SYS_I2C_EEPROM_ADDR	0x50
 /*
  * Software (bit-bang) I2C driver configuration
  */
@@ -145,25 +145,25 @@
 /*
  * Miscellaneous configurable options
  */
-#define	CFG_LONGHELP			/* undef to save memory		*/
-#define	CFG_PROMPT	"=> "		/* Monitor Command Prompt	*/
+#define	CONFIG_SYS_LONGHELP			/* undef to save memory		*/
+#define	CONFIG_SYS_PROMPT	"=> "		/* Monitor Command Prompt	*/
 #if defined(CONFIG_CMD_KGDB)
-#define	CFG_CBSIZE	1024		/* Console I/O Buffer Size	*/
+#define	CONFIG_SYS_CBSIZE	1024		/* Console I/O Buffer Size	*/
 #else
-#define	CFG_CBSIZE	256		/* Console I/O Buffer Size	*/
+#define	CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size	*/
 #endif
-#define	CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define	CFG_MAXARGS	16		/* max number of command args	*/
-#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+#define	CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define	CONFIG_SYS_MAXARGS	16		/* max number of command args	*/
+#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
 
-#define CFG_MEMTEST_START	0x0100000	/* memtest works on	*/
-#define CFG_MEMTEST_END		0x0400000	/* 1 ... 4 MB in DRAM	*/
+#define CONFIG_SYS_MEMTEST_START	0x0100000	/* memtest works on	*/
+#define CONFIG_SYS_MEMTEST_END		0x0400000	/* 1 ... 4 MB in DRAM	*/
 
-#define CFG_LOAD_ADDR		0x00100000
+#define CONFIG_SYS_LOAD_ADDR		0x00100000
 
-#define	CFG_HZ		1000		/* decrementer freq: 1 ms ticks	*/
+#define	CONFIG_SYS_HZ		1000		/* decrementer freq: 1 ms ticks	*/
 
-#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
 
 /*
  * Low Level Configuration Settings
@@ -173,63 +173,63 @@
 /*-----------------------------------------------------------------------
  * Internal Memory Mapped Register
  */
-#define CFG_IMMR		0xFFF00000
-#define CFG_IMMR_SIZE		((uint)(64 * 1024))
+#define CONFIG_SYS_IMMR		0xFFF00000
+#define CONFIG_SYS_IMMR_SIZE		((uint)(64 * 1024))
 
 /*-----------------------------------------------------------------------
  * Definitions for initial stack pointer and data area (in DPRAM)
  */
-#define CFG_INIT_RAM_ADDR	CFG_IMMR
-#define	CFG_INIT_RAM_END	0x2F00	/* End of used area in DPRAM	*/
-#define	CFG_GBL_DATA_SIZE	64  /* size in bytes reserved for initial data */
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define	CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_IMMR
+#define	CONFIG_SYS_INIT_RAM_END	0x2F00	/* End of used area in DPRAM	*/
+#define	CONFIG_SYS_GBL_DATA_SIZE	64  /* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define	CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
 /*-----------------------------------------------------------------------
  * Start addresses for the final memory configuration
  * (Set up by the startup code)
- * Please note that CFG_SDRAM_BASE _must_ start at 0
+ * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
  */
-#define	CFG_SDRAM_BASE		0x00000000
-#define CFG_FLASH_BASE		0x08000000
-#define CFG_FLASH_SIZE		((uint)(4 * 1024 * 1024))	/* max 16Mbyte */
+#define	CONFIG_SYS_SDRAM_BASE		0x00000000
+#define CONFIG_SYS_FLASH_BASE		0x08000000
+#define CONFIG_SYS_FLASH_SIZE		((uint)(4 * 1024 * 1024))	/* max 16Mbyte */
 
-#define CFG_RESET_ADDRESS	0xFFF00100
+#define CONFIG_SYS_RESET_ADDRESS	0xFFF00100
 
 #if defined(DEBUG)
-# define	CFG_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor	*/
+# define	CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor	*/
 #else
-# define	CFG_MONITOR_LEN		(192 << 10)	/* Reserve 192 kB for Monitor	*/
+# define	CONFIG_SYS_MONITOR_LEN		(192 << 10)	/* Reserve 192 kB for Monitor	*/
 #endif
 
-# define CFG_MONITOR_BASE	CFG_FLASH_BASE
-# define CFG_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/
+# define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_FLASH_BASE
+# define CONFIG_SYS_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/
 
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define	CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux	*/
+#define	CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux	*/
 /*-----------------------------------------------------------------------
  * FLASH organization
  */
-#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
-#define CFG_MAX_FLASH_SECT	67	/* max number of sectors on one chip	*/
+#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
+#define CONFIG_SYS_MAX_FLASH_SECT	67	/* max number of sectors on one chip	*/
 
-#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
-#define CFG_FLASH_WRITE_TOUT	500		/* Timeout for Flash Write (in ms)	*/
+#define CONFIG_SYS_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
+#define CONFIG_SYS_FLASH_WRITE_TOUT	500		/* Timeout for Flash Write (in ms)	*/
 
-#define	CFG_ENV_IS_IN_FLASH	1
-#define CFG_ENV_OFFSET		0x8000
-#define	CFG_ENV_SIZE		0x4000	/* Total Size of Environment Sector	*/
+#define	CONFIG_ENV_IS_IN_FLASH	1
+#define CONFIG_ENV_OFFSET		0x8000
+#define	CONFIG_ENV_SIZE		0x4000	/* Total Size of Environment Sector	*/
 
 /*-----------------------------------------------------------------------
  * Cache Configuration
  */
-#define CFG_CACHELINE_SIZE	16	/* For all MPC8xx CPUs			*/
+#define CONFIG_SYS_CACHELINE_SIZE	16	/* For all MPC8xx CPUs			*/
 #if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT	4	/* log base 2 of the above value	*/
+#define CONFIG_SYS_CACHELINE_SHIFT	4	/* log base 2 of the above value	*/
 #endif
 
 /*-----------------------------------------------------------------------
@@ -239,10 +239,10 @@
  * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze
  */
 #if defined(CONFIG_WATCHDOG)
-#define CFG_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
+#define CONFIG_SYS_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
 			 SYPCR_SWE  | SYPCR_SWRI| SYPCR_SWP)
 #else
-#define CFG_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
+#define CONFIG_SYS_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
 #endif
 
 /*-----------------------------------------------------------------------
@@ -250,28 +250,28 @@
  *-----------------------------------------------------------------------
  * PCMCIA config., multi-function pin tri-state
  */
-#define CFG_SIUMCR	(SIUMCR_DBGC11 | SIUMCR_DBPC00 | SIUMCR_MLRC01)
+#define CONFIG_SYS_SIUMCR	(SIUMCR_DBGC11 | SIUMCR_DBPC00 | SIUMCR_MLRC01)
 
 /*-----------------------------------------------------------------------
  * TBSCR - Time Base Status and Control					11-26
  *-----------------------------------------------------------------------
  * Clear Reference Interrupt Status, Timebase freezing enabled
  */
-#define CFG_TBSCR	(TBSCR_REFA | TBSCR_REFB | TBSCR_TBF)
+#define CONFIG_SYS_TBSCR	(TBSCR_REFA | TBSCR_REFB | TBSCR_TBF)
 
 /*-----------------------------------------------------------------------
  * PISCR - Periodic Interrupt Status and Control		11-31
  *-----------------------------------------------------------------------
  * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
  */
-#define CFG_PISCR	(PISCR_PS | PISCR_PITF)
+#define CONFIG_SYS_PISCR	(PISCR_PS | PISCR_PITF)
 
 /*-----------------------------------------------------------------------
  * PLPRCR - PLL, Low-Power, and Reset Control Register	15-30
  *-----------------------------------------------------------------------
  * set the PLL, the low-power modes and the reset control (15-29)
  */
-#define CFG_PLPRCR	(((MPC8XX_FACT-1) << PLPRCR_MF_SHIFT) |	\
+#define CONFIG_SYS_PLPRCR	(((MPC8XX_FACT-1) << PLPRCR_MF_SHIFT) |	\
 				PLPRCR_SPLSS | PLPRCR_TEXPS | PLPRCR_TMIST)
 
 /*-----------------------------------------------------------------------
@@ -282,7 +282,7 @@
  */
 #define SCCR_MASK	SCCR_EBDF11
 
-#define CFG_SCCR	(SCCR_TBS	| SCCR_COM00	| SCCR_DFSYNC00	| \
+#define CONFIG_SYS_SCCR	(SCCR_TBS	| SCCR_COM00	| SCCR_DFSYNC00	| \
 			 SCCR_DFBRG00	| SCCR_DFNL000	| SCCR_DFNH000	| \
 			 SCCR_DFLCD000	|SCCR_DFALCD00	)
 
@@ -291,7 +291,7 @@
  *-----------------------------------------------------------------------
  */
 /* +0x09C4 => DRQP = 10 (IDMA requests have lowest priority) */
-#define CFG_RCCR 0x0020
+#define CONFIG_SYS_RCCR 0x0020
 
 /*-----------------------------------------------------------------------
  * PCMCIA stuff
@@ -305,7 +305,7 @@
  *-----------------------------------------------------------------------
  *
  */
-#define CFG_DER		0
+#define CONFIG_SYS_DER		0
 
 /* Because of the way the 860 starts up and assigns CS0 the
 * entire address space, we have to set the memory controller
@@ -321,22 +321,22 @@
  * BR0 and OR0 (FLASH)
  */
 
-#define FLASH_BASE0_PRELIM	CFG_FLASH_BASE	/* FLASH bank #0	*/
+#define FLASH_BASE0_PRELIM	CONFIG_SYS_FLASH_BASE	/* FLASH bank #0	*/
 
 /* used to re-map FLASH both when starting from SRAM or FLASH:
  * restrict access enough to keep SRAM working (if any)
  * but not too much to meddle with FLASH accesses
  */
-#define CFG_REMAP_OR_AM		0xF8000000	/* OR addr mask */
-#define CFG_PRELIM_OR_AM	0xF8000000	/* OR addr mask */
+#define CONFIG_SYS_REMAP_OR_AM		0xF8000000	/* OR addr mask */
+#define CONFIG_SYS_PRELIM_OR_AM	0xF8000000	/* OR addr mask */
 
 /* FLASH timing:
  TRLX = 0, CSNT = 1, SCY = 3, EHTR = 1	*/
-#define CFG_OR_TIMING_FLASH	(OR_CSNT_SAM  | OR_BI | \
+#define CONFIG_SYS_OR_TIMING_FLASH	(OR_CSNT_SAM  | OR_BI | \
 				 OR_SCY_3_CLK | OR_EHTR)
 
-#define CFG_OR0_PRELIM	(CFG_PRELIM_OR_AM | CFG_OR_TIMING_FLASH)
-#define CFG_BR0_PRELIM	((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_V )
+#define CONFIG_SYS_OR0_PRELIM	(CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_FLASH)
+#define CONFIG_SYS_BR0_PRELIM	((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_V )
 
 /*
  * BR2/3 and OR2/3 (SDRAM)
@@ -347,25 +347,25 @@
 
 /* SDRAM timing: Multiplexed addresses, GPL5 output to GPL5_A (don't care)	*/
 
-#define CFG_OR2_PRELIM	(CFG_PRELIM_OR_AM | OR_CSNT_SAM  | OR_BI | OR_ACS_DIV4)
-#define CFG_BR2_PRELIM	((SDRAM_BASE_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
-#define CFG_BR1_PRELIM	((SDRAM_BASE1_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V)
+#define CONFIG_SYS_OR2_PRELIM	(CONFIG_SYS_PRELIM_OR_AM | OR_CSNT_SAM  | OR_BI | OR_ACS_DIV4)
+#define CONFIG_SYS_BR2_PRELIM	((SDRAM_BASE_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
+#define CONFIG_SYS_BR1_PRELIM	((SDRAM_BASE1_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V)
 
 /*
  * Memory Periodic Timer Prescaler
  */
 
 /* periodic timer for refresh */
-#define CFG_MAMR_PTA	124		/* start with divider for 64 MHz	*/
+#define CONFIG_SYS_MAMR_PTA	124		/* start with divider for 64 MHz	*/
 
 /* refresh rate 15.6 us (= 64 ms / 4K = 62.4 / quad bursts) for <= 128 MBit	*/
-#define CFG_MPTPR	        MPTPR_PTP_DIV32		/* setting for 1 bank	*/
+#define CONFIG_SYS_MPTPR	        MPTPR_PTP_DIV32		/* setting for 1 bank	*/
 
 /*
  * MAMR settings for SDRAM
  */
 
-#define CFG_MAMR	((CFG_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
+#define CONFIG_SYS_MAMR	((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
 			 MAMR_AMA_TYPE_0 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A11 |	\
 			 MAMR_RLFA_1X	 | MAMR_WLFA_1X	   | MAMR_TLFA_8X)
 
diff --git a/include/configs/ICU862.h b/include/configs/ICU862.h
index f693956d4..917135e58 100644
--- a/include/configs/ICU862.h
+++ b/include/configs/ICU862.h
@@ -95,9 +95,9 @@
 #define	CONFIG_FEC_ENET		1	/* use FEC ethernet  */
 #define	CONFIG_MII		1
 #if 1
-#define CFG_DISCOVER_PHY	1
+#define CONFIG_SYS_DISCOVER_PHY	1
 #else
-#undef	CFG_DISCOVER_PHY
+#undef	CONFIG_SYS_DISCOVER_PHY
 #endif
 
 #define CONFIG_MAC_PARTITION
@@ -106,10 +106,10 @@
 /* enable I2C and select the hardware/software driver */
 #undef  CONFIG_HARD_I2C			/* I2C with hardware support	*/
 #define CONFIG_SOFT_I2C		1	/* I2C bit-banged		*/
-# define CFG_I2C_SPEED		50000
-# define CFG_I2C_SLAVE		0xFE
-# define CFG_I2C_EEPROM_ADDR	0x50
-# define CFG_I2C_EEPROM_ADDR_LEN 1	/* Bytes of address		*/
+# define CONFIG_SYS_I2C_SPEED		50000
+# define CONFIG_SYS_I2C_SLAVE		0xFE
+# define CONFIG_SYS_I2C_EEPROM_ADDR	0x50
+# define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1	/* Bytes of address		*/
 /*
  * Software (bit-bang) I2C driver configuration
  */
@@ -126,8 +126,8 @@
 			else    immr->im_cpm.cp_pbdat &= ~PB_SCL
 #define I2C_DELAY	udelay(5)	/* 1/4 I2C clock duration */
 
-#define CFG_EEPROM_X40430		/* Use a Xicor X40430 EEPROM	*/
-#define CFG_EEPROM_PAGE_WRITE_BITS  4	/* 16 bytes page write mode	*/
+#define CONFIG_SYS_EEPROM_X40430		/* Use a Xicor X40430 EEPROM	*/
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS  4	/* 16 bytes page write mode	*/
 
 #define	CONFIG_RTC_MPC8xx		/* use internal RTC of MPC8xx	*/
 
@@ -150,25 +150,25 @@
 /*
  * Miscellaneous configurable options
  */
-#define	CFG_LONGHELP			/* undef to save memory		*/
-#define	CFG_PROMPT	"=> "		/* Monitor Command Prompt	*/
+#define	CONFIG_SYS_LONGHELP			/* undef to save memory		*/
+#define	CONFIG_SYS_PROMPT	"=> "		/* Monitor Command Prompt	*/
 #if defined(CONFIG_CMD_KGDB)
-#define	CFG_CBSIZE	1024		/* Console I/O Buffer Size	*/
+#define	CONFIG_SYS_CBSIZE	1024		/* Console I/O Buffer Size	*/
 #else
-#define	CFG_CBSIZE	256		/* Console I/O Buffer Size	*/
+#define	CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size	*/
 #endif
-#define	CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define	CFG_MAXARGS	16		/* max number of command args	*/
-#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+#define	CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define	CONFIG_SYS_MAXARGS	16		/* max number of command args	*/
+#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
 
-#define CFG_MEMTEST_START	0x0100000	/* memtest works on	*/
-#define CFG_MEMTEST_END		0x0400000	/* 1 ... 4 MB in DRAM	*/
+#define CONFIG_SYS_MEMTEST_START	0x0100000	/* memtest works on	*/
+#define CONFIG_SYS_MEMTEST_END		0x0400000	/* 1 ... 4 MB in DRAM	*/
 
-#define CFG_LOAD_ADDR		0x00100000
+#define CONFIG_SYS_LOAD_ADDR		0x00100000
 
-#define	CFG_HZ		1000		/* decrementer freq: 1 ms ticks	*/
+#define	CONFIG_SYS_HZ		1000		/* decrementer freq: 1 ms ticks	*/
 
-#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
 
 /*
  * Low Level Configuration Settings
@@ -178,70 +178,70 @@
 /*-----------------------------------------------------------------------
  * Internal Memory Mapped Register
  */
-#define CFG_IMMR		0xF0000000
-#define CFG_IMMR_SIZE		((uint)(64 * 1024))
+#define CONFIG_SYS_IMMR		0xF0000000
+#define CONFIG_SYS_IMMR_SIZE		((uint)(64 * 1024))
 
 /*-----------------------------------------------------------------------
  * Definitions for initial stack pointer and data area (in DPRAM)
  */
-#define CFG_INIT_RAM_ADDR	CFG_IMMR
-#define	CFG_INIT_RAM_END	0x2F00	/* End of used area in DPRAM	*/
-#define	CFG_GBL_DATA_SIZE	64  /* size in bytes reserved for initial data */
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define	CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_IMMR
+#define	CONFIG_SYS_INIT_RAM_END	0x2F00	/* End of used area in DPRAM	*/
+#define	CONFIG_SYS_GBL_DATA_SIZE	64  /* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define	CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
 /*-----------------------------------------------------------------------
  * Start addresses for the final memory configuration
  * (Set up by the startup code)
- * Please note that CFG_SDRAM_BASE _must_ start at 0
+ * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
  */
-#define	CFG_SDRAM_BASE		0x00000000
-#define CFG_FLASH_BASE		0x40000000
-#define CFG_FLASH_SIZE		((uint)(16 * 1024 * 1024))	/* max 16Mbyte */
+#define	CONFIG_SYS_SDRAM_BASE		0x00000000
+#define CONFIG_SYS_FLASH_BASE		0x40000000
+#define CONFIG_SYS_FLASH_SIZE		((uint)(16 * 1024 * 1024))	/* max 16Mbyte */
 
-#define CFG_RESET_ADDRESS	0xFFF00100
+#define CONFIG_SYS_RESET_ADDRESS	0xFFF00100
 
 #if 0
 #if defined(DEBUG)
-#define	CFG_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor	*/
+#define	CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor	*/
 #else
-#define	CFG_MONITOR_LEN		(192 << 10)	/* Reserve 192 kB for Monitor	*/
+#define	CONFIG_SYS_MONITOR_LEN		(192 << 10)	/* Reserve 192 kB for Monitor	*/
 #endif
 #else
-#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
+#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
 #endif
-#define CFG_MONITOR_BASE	TEXT_BASE
-#define	CFG_MALLOC_LEN		(256 << 10)	/* Reserve 256 kB for malloc()	*/
+#define CONFIG_SYS_MONITOR_BASE	TEXT_BASE
+#define	CONFIG_SYS_MALLOC_LEN		(256 << 10)	/* Reserve 256 kB for malloc()	*/
 
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define	CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux	*/
+#define	CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux	*/
 /*-----------------------------------------------------------------------
  * FLASH organization
  */
-#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
-#define CFG_MAX_FLASH_SECT	64	/* max number of sectors on one chip	*/
+#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
+#define CONFIG_SYS_MAX_FLASH_SECT	64	/* max number of sectors on one chip	*/
 
-#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
-#define CFG_FLASH_WRITE_TOUT	500		/* Timeout for Flash Write (in ms)	*/
+#define CONFIG_SYS_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
+#define CONFIG_SYS_FLASH_WRITE_TOUT	500		/* Timeout for Flash Write (in ms)	*/
 
 
-#define	CFG_ENV_IS_IN_FLASH	1
-#define CFG_ENV_OFFSET		0x00F40000
+#define	CONFIG_ENV_IS_IN_FLASH	1
+#define CONFIG_ENV_OFFSET		0x00F40000
 
-#define CFG_ENV_SECT_SIZE	0x40000	/* Total Size of Environment sector	*/
-#define	CFG_ENV_SIZE		0x4000	/* Used Size of Environment Sector	*/
-#define	CFG_USE_PPCENV			/* Environment embedded in sect .ppcenv */
+#define CONFIG_ENV_SECT_SIZE	0x40000	/* Total Size of Environment sector	*/
+#define	CONFIG_ENV_SIZE		0x4000	/* Used Size of Environment Sector	*/
+#define	CONFIG_SYS_USE_PPCENV			/* Environment embedded in sect .ppcenv */
 
 /*-----------------------------------------------------------------------
  * Cache Configuration
  */
-#define CFG_CACHELINE_SIZE	16	/* For all MPC8xx CPUs			*/
+#define CONFIG_SYS_CACHELINE_SIZE	16	/* For all MPC8xx CPUs			*/
 #if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT	4	/* log base 2 of the above value	*/
+#define CONFIG_SYS_CACHELINE_SHIFT	4	/* log base 2 of the above value	*/
 #endif
 
 /*-----------------------------------------------------------------------
@@ -251,10 +251,10 @@
  * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze
  */
 #if defined(CONFIG_WATCHDOG)
-#define CFG_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
+#define CONFIG_SYS_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
 			 SYPCR_SWE  | SYPCR_SWRI| SYPCR_SWP)
 #else
-#define CFG_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
+#define CONFIG_SYS_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
 #endif
 
 /*-----------------------------------------------------------------------
@@ -262,28 +262,28 @@
  *-----------------------------------------------------------------------
  * PCMCIA config., multi-function pin tri-state
  */
-#define CFG_SIUMCR	(SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_MLRC01)
+#define CONFIG_SYS_SIUMCR	(SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_MLRC01)
 
 /*-----------------------------------------------------------------------
  * TBSCR - Time Base Status and Control					11-26
  *-----------------------------------------------------------------------
  * Clear Reference Interrupt Status, Timebase freezing enabled
  */
-#define CFG_TBSCR	(TBSCR_REFA | TBSCR_REFB | TBSCR_TBE)
+#define CONFIG_SYS_TBSCR	(TBSCR_REFA | TBSCR_REFB | TBSCR_TBE)
 
 /*-----------------------------------------------------------------------
  * PISCR - Periodic Interrupt Status and Control		11-31
  *-----------------------------------------------------------------------
  * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
  */
-#define CFG_PISCR	(PISCR_PS | PISCR_PITF)
+#define CONFIG_SYS_PISCR	(PISCR_PS | PISCR_PITF)
 
 /*-----------------------------------------------------------------------
  * PLPRCR - PLL, Low-Power, and Reset Control Register	15-30
  *-----------------------------------------------------------------------
  * set the PLL, the low-power modes and the reset control (15-29)
  */
-#define CFG_PLPRCR	(((MPC8XX_FACT-1) << PLPRCR_MF_SHIFT) |	\
+#define CONFIG_SYS_PLPRCR	(((MPC8XX_FACT-1) << PLPRCR_MF_SHIFT) |	\
 				PLPRCR_SPLSS | PLPRCR_TEXPS | PLPRCR_TMIST)
 
 /*-----------------------------------------------------------------------
@@ -294,12 +294,12 @@
  */
 #ifdef CONFIG_100MHz	/* for 100 MHz, external bus is half CPU clock */
 #define SCCR_MASK	0
-#define CFG_SCCR	(SCCR_TBS	| SCCR_COM00	| SCCR_DFSYNC00	| \
+#define CONFIG_SYS_SCCR	(SCCR_TBS	| SCCR_COM00	| SCCR_DFSYNC00	| \
 			 SCCR_DFBRG00	| SCCR_DFNL000	| SCCR_DFNH000	| \
 			 SCCR_DFLCD000	|SCCR_DFALCD00	| SCCR_EBDF01)
 #else			/* up to 50 MHz we use a 1:1 clock */
 #define SCCR_MASK	SCCR_EBDF11
-#define CFG_SCCR	(SCCR_TBS	| SCCR_COM00	| SCCR_DFSYNC00	| \
+#define CONFIG_SYS_SCCR	(SCCR_TBS	| SCCR_COM00	| SCCR_DFSYNC00	| \
 			 SCCR_DFBRG00	| SCCR_DFNL000	| SCCR_DFNH000	| \
 			 SCCR_DFLCD000	|SCCR_DFALCD00	)
 #endif	/* CONFIG_100MHz */
@@ -309,20 +309,20 @@
  *-----------------------------------------------------------------------
  */
 /* +0x09C4 => DRQP = 10 (IDMA requests have lowest priority) */
-#define CFG_RCCR 0x0020
+#define CONFIG_SYS_RCCR 0x0020
 
 /*-----------------------------------------------------------------------
  * PCMCIA stuff
  *-----------------------------------------------------------------------
  */
-#define CFG_PCMCIA_MEM_ADDR	(0xE0000000)
-#define CFG_PCMCIA_MEM_SIZE	( 64 << 20 )
-#define CFG_PCMCIA_DMA_ADDR	(0xE4000000)
-#define CFG_PCMCIA_DMA_SIZE	( 64 << 20 )
-#define CFG_PCMCIA_ATTRB_ADDR	(0xE8000000)
-#define CFG_PCMCIA_ATTRB_SIZE	( 64 << 20 )
-#define CFG_PCMCIA_IO_ADDR	(0xEC000000)
-#define CFG_PCMCIA_IO_SIZE	( 64 << 20 )
+#define CONFIG_SYS_PCMCIA_MEM_ADDR	(0xE0000000)
+#define CONFIG_SYS_PCMCIA_MEM_SIZE	( 64 << 20 )
+#define CONFIG_SYS_PCMCIA_DMA_ADDR	(0xE4000000)
+#define CONFIG_SYS_PCMCIA_DMA_SIZE	( 64 << 20 )
+#define CONFIG_SYS_PCMCIA_ATTRB_ADDR	(0xE8000000)
+#define CONFIG_SYS_PCMCIA_ATTRB_SIZE	( 64 << 20 )
+#define CONFIG_SYS_PCMCIA_IO_ADDR	(0xEC000000)
+#define CONFIG_SYS_PCMCIA_IO_SIZE	( 64 << 20 )
 
 /*-----------------------------------------------------------------------
  * PCMCIA Power Switch
@@ -356,21 +356,21 @@
 #undef	CONFIG_IDE_LED			/* LED   for ide not supported	*/
 #undef	CONFIG_IDE_RESET		/* reset for ide not supported	*/
 
-#define CFG_IDE_MAXBUS		1	/* max. 1 IDE bus		*/
-#define CFG_IDE_MAXDEVICE	1	/* max. 1 drive per IDE bus	*/
+#define CONFIG_SYS_IDE_MAXBUS		1	/* max. 1 IDE bus		*/
+#define CONFIG_SYS_IDE_MAXDEVICE	1	/* max. 1 drive per IDE bus	*/
 
-#define CFG_ATA_IDE0_OFFSET	0x0000
+#define CONFIG_SYS_ATA_IDE0_OFFSET	0x0000
 
-#define CFG_ATA_BASE_ADDR	CFG_PCMCIA_MEM_ADDR
+#define CONFIG_SYS_ATA_BASE_ADDR	CONFIG_SYS_PCMCIA_MEM_ADDR
 
 /* Offset for data I/O			*/
-#define CFG_ATA_DATA_OFFSET	(CFG_PCMCIA_MEM_SIZE + 0x320)
+#define CONFIG_SYS_ATA_DATA_OFFSET	(CONFIG_SYS_PCMCIA_MEM_SIZE + 0x320)
 
 /* Offset for normal register accesses	*/
-#define CFG_ATA_REG_OFFSET	(2 * CFG_PCMCIA_MEM_SIZE + 0x320)
+#define CONFIG_SYS_ATA_REG_OFFSET	(2 * CONFIG_SYS_PCMCIA_MEM_SIZE + 0x320)
 
 /* Offset for alternate registers	*/
-#define CFG_ATA_ALT_OFFSET	0x0100
+#define CONFIG_SYS_ATA_ALT_OFFSET	0x0100
 
 
  /*-----------------------------------------------------------------------
@@ -378,7 +378,7 @@
  *-----------------------------------------------------------------------
  *
  */
-#define CFG_DER		0
+#define CONFIG_SYS_DER		0
 
 /* Because of the way the 860 starts up and assigns CS0 the
 * entire address space, we have to set the memory controller
@@ -397,16 +397,16 @@
 #define FLASH_BASE0_PRELIM	0x40000000	/* FLASH bank #0	*/
 #define FLASH_BASE1_PRELIM	0x0		/* FLASH bank #1	*/
 
-#define CFG_REMAP_OR_AM		0x80000000	/* OR addr mask */
-#define CFG_PRELIM_OR_AM	0xE0000000	/* OR addr mask */
+#define CONFIG_SYS_REMAP_OR_AM		0x80000000	/* OR addr mask */
+#define CONFIG_SYS_PRELIM_OR_AM	0xE0000000	/* OR addr mask */
 
 /* FLASH timing: ACS = 10, TRLX = 1, CSNT = 1, SCY = 3, EHTR = 0	*/
-#define CFG_OR_TIMING_FLASH	(OR_CSNT_SAM  | OR_ACS_DIV4 | OR_BI | OR_SCY_3_CLK | OR_TRLX)
+#define CONFIG_SYS_OR_TIMING_FLASH	(OR_CSNT_SAM  | OR_ACS_DIV4 | OR_BI | OR_SCY_3_CLK | OR_TRLX)
 
-#define CFG_OR0_REMAP	(CFG_REMAP_OR_AM  | CFG_OR_TIMING_FLASH)
+#define CONFIG_SYS_OR0_REMAP	(CONFIG_SYS_REMAP_OR_AM  | CONFIG_SYS_OR_TIMING_FLASH)
 
-#define CFG_OR0_PRELIM	0xFF000954		/* Real values for the board */
-#define CFG_BR0_PRELIM	0x40000001		/* Real values for the board */
+#define CONFIG_SYS_OR0_PRELIM	0xFF000954		/* Real values for the board */
+#define CONFIG_SYS_BR0_PRELIM	0x40000001		/* Real values for the board */
 
 /*
  * BR1 and OR1 (SDRAM)
@@ -414,40 +414,40 @@
 #define SDRAM_BASE1_PRELIM	0x00000000	/* SDRAM bank		*/
 #define SDRAM_MAX_SIZE		0x04000000	/* max 64 MB per bank	*/
 
-#define CFG_OR_TIMING_SDRAM	0x00000800	/* BIH is not set	*/
+#define CONFIG_SYS_OR_TIMING_SDRAM	0x00000800	/* BIH is not set	*/
 
-#define CFG_OR1_PRELIM	(CFG_PRELIM_OR_AM | CFG_OR_TIMING_SDRAM)
-#define CFG_BR1_PRELIM	((SDRAM_BASE1_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V)
+#define CONFIG_SYS_OR1_PRELIM	(CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_SDRAM)
+#define CONFIG_SYS_BR1_PRELIM	((SDRAM_BASE1_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V)
 
 /*
  * Memory Periodic Timer Prescaler
  */
 
 /* periodic timer for refresh */
-#define CFG_MAMR_PTA		97	/* start with divider for 100 MHz	*/
+#define CONFIG_SYS_MAMR_PTA		97	/* start with divider for 100 MHz	*/
 
 /* refresh rate 15.6 us (= 64 ms / 4K = 62.4 / quad bursts) for <= 128 MBit	*/
-#define CFG_MPTPR_2BK_4K	MPTPR_PTP_DIV16		/* setting for 2 banks	*/
-#define CFG_MPTPR_1BK_4K	MPTPR_PTP_DIV32		/* setting for 1 bank	*/
+#define CONFIG_SYS_MPTPR_2BK_4K	MPTPR_PTP_DIV16		/* setting for 2 banks	*/
+#define CONFIG_SYS_MPTPR_1BK_4K	MPTPR_PTP_DIV32		/* setting for 1 bank	*/
 
 /* refresh rate 7.8 us (= 64 ms / 8K = 31.2 / quad bursts) for 256 MBit		*/
-#define CFG_MPTPR_2BK_8K	MPTPR_PTP_DIV8		/* setting for 2 banks	*/
-#define CFG_MPTPR_1BK_8K	MPTPR_PTP_DIV16		/* setting for 1 bank	*/
+#define CONFIG_SYS_MPTPR_2BK_8K	MPTPR_PTP_DIV8		/* setting for 2 banks	*/
+#define CONFIG_SYS_MPTPR_1BK_8K	MPTPR_PTP_DIV16		/* setting for 1 bank	*/
 
 /*
  * MAMR settings for SDRAM
  */
 
 /* 8 column SDRAM */
-#define CFG_MAMR_8COL	((CFG_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
+#define CONFIG_SYS_MAMR_8COL	((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
 			 MAMR_AMA_TYPE_0 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A11 |	\
 			 MAMR_RLFA_1X	 | MAMR_WLFA_1X	   | MAMR_TLFA_4X)
 /* 9 column SDRAM */
-#define CFG_MAMR_9COL	((CFG_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
+#define CONFIG_SYS_MAMR_9COL	((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
 			 MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 |	\
 			 MAMR_RLFA_1X	 | MAMR_WLFA_1X	   | MAMR_TLFA_4X)
 
-#define CFG_MAMR		0x13a01114
+#define CONFIG_SYS_MAMR		0x13a01114
 /*
  * Internal Definitions
  *
diff --git a/include/configs/IDS8247.h b/include/configs/IDS8247.h
index 029bb9914..a610ac9c2 100644
--- a/include/configs/IDS8247.h
+++ b/include/configs/IDS8247.h
@@ -73,8 +73,8 @@
 /* enable I2C and select the hardware/software driver */
 #undef  CONFIG_HARD_I2C			/* I2C with hardware support	*/
 #define CONFIG_SOFT_I2C		1	/* I2C bit-banged		*/
-#define CFG_I2C_SPEED		400000	/* I2C speed and slave address	*/
-#define CFG_I2C_SLAVE		0x7F
+#define CONFIG_SYS_I2C_SPEED		400000	/* I2C speed and slave address	*/
+#define CONFIG_SYS_I2C_SLAVE		0x7F
 
 /*
  * Software (bit-bang) I2C driver configuration
@@ -91,10 +91,10 @@
 #define I2C_DELAY	udelay(5)	/* 1/4 I2C clock duration */
 
 #if 0
-#define CFG_I2C_EEPROM_ADDR	0x50
-#define CFG_I2C_EEPROM_ADDR_LEN 2
-#define CFG_EEPROM_PAGE_WRITE_BITS	4
-#define CFG_EEPROM_PAGE_WRITE_DELAY_MS	10	/* and takes up to 10 msec */
+#define CONFIG_SYS_I2C_EEPROM_ADDR	0x50
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS	4
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	10	/* and takes up to 10 msec */
 
 #define CONFIG_I2C_X
 #endif
@@ -108,17 +108,17 @@
 /*
  * NS16550 Configuration
  */
-#define CFG_NS16550
-#define CFG_NS16550_SERIAL
+#define CONFIG_SYS_NS16550
+#define CONFIG_SYS_NS16550_SERIAL
 
-#define CFG_NS16550_REG_SIZE    1
+#define CONFIG_SYS_NS16550_REG_SIZE    1
 
-#define CFG_NS16550_CLK         14745600
+#define CONFIG_SYS_NS16550_CLK         14745600
 
-#define	CFG_UART_BASE	0xE0000000
-#define CFG_UART_SIZE	0x10000
+#define	CONFIG_SYS_UART_BASE	0xE0000000
+#define CONFIG_SYS_UART_SIZE	0x10000
 
-#define CFG_NS16550_COM1        (CFG_UART_BASE + 0x8000)
+#define CONFIG_SYS_NS16550_COM1        (CONFIG_SYS_UART_BASE + 0x8000)
 
 
 /* pass open firmware flat tree */
@@ -154,17 +154,17 @@
  * - RAM for BD/Buffers is on the 60x Bus (see 28-13)
  * - Enable Full Duplex in FSMR
  */
-# define CFG_CMXFCR_MASK	(CMXFCR_FC1|CMXFCR_RF1CS_MSK|CMXFCR_TF1CS_MSK)
-# define CFG_CMXFCR_VALUE	(CMXFCR_RF1CS_CLK10|CMXFCR_TF1CS_CLK9)
-# define CFG_CPMFCR_RAMTYPE	0
-# define CFG_FCC_PSMR		(FCC_PSMR_FDE|FCC_PSMR_LPB)
+# define CONFIG_SYS_CMXFCR_MASK	(CMXFCR_FC1|CMXFCR_RF1CS_MSK|CMXFCR_TF1CS_MSK)
+# define CONFIG_SYS_CMXFCR_VALUE	(CMXFCR_RF1CS_CLK10|CMXFCR_TF1CS_CLK9)
+# define CONFIG_SYS_CPMFCR_RAMTYPE	0
+# define CONFIG_SYS_FCC_PSMR		(FCC_PSMR_FDE|FCC_PSMR_LPB)
 
 
 /* system clock rate (CLKIN) - equal to the 60x and local bus speed */
 #define CONFIG_8260_CLKIN	66666666	/* in Hz */
 
 #define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
-#undef	CFG_LOADS_BAUD_CHANGE		/* don't allow baudrate change	*/
+#undef	CONFIG_SYS_LOADS_BAUD_CHANGE		/* don't allow baudrate change	*/
 
 #undef	CONFIG_WATCHDOG			/* watchdog disabled		*/
 
@@ -180,7 +180,7 @@
 #define CONFIG_BOOTP_BOOTFILESIZE
 
 #define CONFIG_RTC_PCF8563
-#define CFG_I2C_RTC_ADDR		0x51
+#define CONFIG_SYS_I2C_RTC_ADDR		0x51
 
 /*
  * Command line configuration.
@@ -197,64 +197,64 @@
 /*
  * Miscellaneous configurable options
  */
-#define	CFG_LONGHELP			/* undef to save memory		*/
-#define	CFG_PROMPT	"=> "		/* Monitor Command Prompt	*/
+#define	CONFIG_SYS_LONGHELP			/* undef to save memory		*/
+#define	CONFIG_SYS_PROMPT	"=> "		/* Monitor Command Prompt	*/
 #if defined(CONFIG_CMD_KGDB)
-#define	CFG_CBSIZE	1024		/* Console I/O Buffer Size	*/
+#define	CONFIG_SYS_CBSIZE	1024		/* Console I/O Buffer Size	*/
 #else
-#define	CFG_CBSIZE	256		/* Console I/O Buffer Size	*/
+#define	CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size	*/
 #endif
-#define	CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define	CFG_MAXARGS	16		/* max number of command args	*/
-#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+#define	CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define	CONFIG_SYS_MAXARGS	16		/* max number of command args	*/
+#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
 
-#define CFG_MEMTEST_START	0x0400000	/* memtest works on	*/
-#define CFG_MEMTEST_END	0x0C00000	/* 4 ... 12 MB in DRAM	*/
+#define CONFIG_SYS_MEMTEST_START	0x0400000	/* memtest works on	*/
+#define CONFIG_SYS_MEMTEST_END	0x0C00000	/* 4 ... 12 MB in DRAM	*/
 
-#define	CFG_LOAD_ADDR	0x100000	/* default load address	*/
+#define	CONFIG_SYS_LOAD_ADDR	0x100000	/* default load address	*/
 
-#define	CFG_HZ		1000		/* decrementer freq: 1 ms ticks	*/
+#define	CONFIG_SYS_HZ		1000		/* decrementer freq: 1 ms ticks	*/
 
-#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
 
-#define	CFG_RESET_ADDRESS 0xFDFFFFFC	/* "bad" address		*/
+#define	CONFIG_SYS_RESET_ADDRESS 0xFDFFFFFC	/* "bad" address		*/
 
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define CFG_BOOTMAPSZ        (8 << 20)       /* Initial Memory map for Linux */
+#define CONFIG_SYS_BOOTMAPSZ        (8 << 20)       /* Initial Memory map for Linux */
 
-#define CFG_FLASH_CFI				/* The flash is CFI compatible  */
+#define CONFIG_SYS_FLASH_CFI				/* The flash is CFI compatible  */
 #define CONFIG_FLASH_CFI_DRIVER			/* Use common CFI driver        */
-#define CFG_FLASH_BANKS_LIST	{ 0xFF800000 }
-#define CFG_MAX_FLASH_BANKS_DETECT	1
+#define CONFIG_SYS_FLASH_BANKS_LIST	{ 0xFF800000 }
+#define CONFIG_SYS_MAX_FLASH_BANKS_DETECT	1
 /* What should the base address of the main FLASH be and how big is
  * it (in MBytes)? This must contain TEXT_BASE from board/ids8247/config.mk
  * The main FLASH is whichever is connected to *CS0.
  */
-#define CFG_FLASH0_BASE 0xFFF00000
-#define CFG_FLASH0_SIZE 8
+#define CONFIG_SYS_FLASH0_BASE 0xFFF00000
+#define CONFIG_SYS_FLASH0_SIZE 8
 
 /* Flash bank size (for preliminary settings)
  */
-#define CFG_FLASH_SIZE CFG_FLASH0_SIZE
+#define CONFIG_SYS_FLASH_SIZE CONFIG_SYS_FLASH0_SIZE
 
 /*-----------------------------------------------------------------------
  * FLASH organization
  */
-#define CFG_MAX_FLASH_BANKS	1	/* max num of memory banks      */
-#define CFG_MAX_FLASH_SECT	128	/* max num of sects on one chip */
+#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max num of memory banks      */
+#define CONFIG_SYS_MAX_FLASH_SECT	128	/* max num of sects on one chip */
 
-#define CFG_FLASH_ERASE_TOUT	240000	/* Flash Erase Timeout (in ms)  */
-#define CFG_FLASH_WRITE_TOUT	500	/* Flash Write Timeout (in ms)  */
+#define CONFIG_SYS_FLASH_ERASE_TOUT	240000	/* Flash Erase Timeout (in ms)  */
+#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Flash Write Timeout (in ms)  */
 
 /* Environment in flash */
-#define CFG_ENV_IS_IN_FLASH	1
-#define CFG_ENV_ADDR		(CFG_FLASH_BASE+0x60000)
-#define CFG_ENV_SIZE		0x20000
-#define CFG_ENV_SECT_SIZE	0x20000
+#define CONFIG_ENV_IS_IN_FLASH	1
+#define CONFIG_ENV_ADDR		(CONFIG_SYS_FLASH_BASE+0x60000)
+#define CONFIG_ENV_SIZE		0x20000
+#define CONFIG_ENV_SECT_SIZE	0x20000
 
 /*-----------------------------------------------------------------------
  * NAND-FLASH stuff
@@ -263,9 +263,9 @@
 #if defined(CONFIG_CMD_NAND)
 
 #define CONFIG_NAND_LEGACY
-#define CFG_NAND0_BASE 0xE1000000
+#define CONFIG_SYS_NAND0_BASE 0xE1000000
 
-#define CFG_MAX_NAND_DEVICE     1       /* Max number of NAND devices           */
+#define CONFIG_SYS_MAX_NAND_DEVICE     1       /* Max number of NAND devices           */
 #define SECTORSIZE 512
 #define NAND_NO_RB
 
@@ -326,47 +326,47 @@
 /*-----------------------------------------------------------------------
  * Hard Reset Configuration Words
  *
- * if you change bits in the HRCW, you must also change the CFG_*
+ * if you change bits in the HRCW, you must also change the CONFIG_SYS_*
  * defines for the various registers affected by the HRCW e.g. changing
- * HRCW_DPPCxx requires you to also change CFG_SIUMCR.
+ * HRCW_DPPCxx requires you to also change CONFIG_SYS_SIUMCR.
  */
-#define CFG_HRCW_MASTER	(HRCW_BPS01 | HRCW_BMS | HRCW_ISB100 | HRCW_APPC10 | HRCW_MODCK_H1000)
+#define CONFIG_SYS_HRCW_MASTER	(HRCW_BPS01 | HRCW_BMS | HRCW_ISB100 | HRCW_APPC10 | HRCW_MODCK_H1000)
 
 /* no slaves so just fill with zeros */
-#define CFG_HRCW_SLAVE1		0
-#define CFG_HRCW_SLAVE2		0
-#define CFG_HRCW_SLAVE3		0
-#define CFG_HRCW_SLAVE4		0
-#define CFG_HRCW_SLAVE5		0
-#define CFG_HRCW_SLAVE6		0
-#define CFG_HRCW_SLAVE7		0
+#define CONFIG_SYS_HRCW_SLAVE1		0
+#define CONFIG_SYS_HRCW_SLAVE2		0
+#define CONFIG_SYS_HRCW_SLAVE3		0
+#define CONFIG_SYS_HRCW_SLAVE4		0
+#define CONFIG_SYS_HRCW_SLAVE5		0
+#define CONFIG_SYS_HRCW_SLAVE6		0
+#define CONFIG_SYS_HRCW_SLAVE7		0
 
 /*-----------------------------------------------------------------------
  * Internal Memory Mapped Register
  */
-#define CFG_IMMR		0xF0000000
+#define CONFIG_SYS_IMMR		0xF0000000
 
 /*-----------------------------------------------------------------------
  * Definitions for initial stack pointer and data area (in DPRAM)
  */
-#define CFG_INIT_RAM_ADDR	CFG_IMMR
-#define CFG_INIT_RAM_END	0x2000  /* End of used area in DPRAM    */
-#define CFG_GBL_DATA_SIZE	128 /* size in bytes reserved for initial data*/
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_IMMR
+#define CONFIG_SYS_INIT_RAM_END	0x2000  /* End of used area in DPRAM    */
+#define CONFIG_SYS_GBL_DATA_SIZE	128 /* size in bytes reserved for initial data*/
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
 /*-----------------------------------------------------------------------
  * Start addresses for the final memory configuration
  * (Set up by the startup code)
- * Please note that CFG_SDRAM_BASE _must_ start at 0
+ * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
  *
- * 60x SDRAM is mapped at CFG_SDRAM_BASE
+ * 60x SDRAM is mapped at CONFIG_SYS_SDRAM_BASE
  */
-#define CFG_SDRAM_BASE		0x00000000
-#define CFG_FLASH_BASE		CFG_FLASH0_BASE
-#define CFG_MONITOR_BASE	TEXT_BASE
-#define CFG_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor */
-#define CFG_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()*/
+#define CONFIG_SYS_SDRAM_BASE		0x00000000
+#define CONFIG_SYS_FLASH_BASE		CONFIG_SYS_FLASH0_BASE
+#define CONFIG_SYS_MONITOR_BASE	TEXT_BASE
+#define CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor */
+#define CONFIG_SYS_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()*/
 
 /*
  * Internal Definitions
@@ -380,9 +380,9 @@
 /*-----------------------------------------------------------------------
  * Cache Configuration
  */
-#define CFG_CACHELINE_SIZE      32      /* For MPC8260 CPU              */
+#define CONFIG_SYS_CACHELINE_SIZE      32      /* For MPC8260 CPU              */
 #if defined(CONFIG_CMD_KGDB)
-# define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value */
+# define CONFIG_SYS_CACHELINE_SHIFT	5	/* log base 2 of the above value */
 #endif
 
 /*-----------------------------------------------------------------------
@@ -396,28 +396,28 @@
  * HID1 has only read-only information - nothing to set.
  */
 
-#define CFG_HID0_INIT   (HID0_ICE|HID0_DCE|HID0_ICFI|HID0_DCI)
-#define CFG_HID0_FINAL  0
-#define CFG_HID2        0
+#define CONFIG_SYS_HID0_INIT   (HID0_ICE|HID0_DCE|HID0_ICFI|HID0_DCI)
+#define CONFIG_SYS_HID0_FINAL  0
+#define CONFIG_SYS_HID2        0
 
 /*-----------------------------------------------------------------------
  * RMR - Reset Mode Register                                     5-5
  *-----------------------------------------------------------------------
  * turn on Checkstop Reset Enable
  */
-#define CFG_RMR         0
+#define CONFIG_SYS_RMR         0
 
 /*-----------------------------------------------------------------------
  * BCR - Bus Configuration                                       4-25
  *-----------------------------------------------------------------------
  */
-#define CFG_BCR		0
+#define CONFIG_SYS_BCR		0
 
 /*-----------------------------------------------------------------------
  * SIUMCR - SIU Module Configuration                             4-31
  *-----------------------------------------------------------------------
  */
-#define CFG_SIUMCR      (SIUMCR_DPPC00|SIUMCR_APPC10|SIUMCR_BCTLC01)
+#define CONFIG_SYS_SIUMCR      (SIUMCR_DPPC00|SIUMCR_APPC10|SIUMCR_BCTLC01)
 
 /*-----------------------------------------------------------------------
  * SYPCR - System Protection Control                             4-35
@@ -426,10 +426,10 @@
  * Watchdog & Bus Monitor Timer max, 60x Bus Monitor enable
  */
 #if defined(CONFIG_WATCHDOG)
-#define CFG_SYPCR       (SYPCR_SWTC|SYPCR_BMT|SYPCR_PBME|SYPCR_LBME|\
+#define CONFIG_SYS_SYPCR       (SYPCR_SWTC|SYPCR_BMT|SYPCR_PBME|SYPCR_LBME|\
 			 SYPCR_SWRI|SYPCR_SWP|SYPCR_SWE)
 #else
-#define CFG_SYPCR       (SYPCR_SWTC|SYPCR_BMT|SYPCR_PBME|SYPCR_LBME|\
+#define CONFIG_SYS_SYPCR       (SYPCR_SWTC|SYPCR_BMT|SYPCR_PBME|SYPCR_LBME|\
 			 SYPCR_SWRI|SYPCR_SWP)
 #endif /* CONFIG_WATCHDOG */
 
@@ -439,7 +439,7 @@
  * Clear once per Second and Alarm Interrupt Status, Set 32KHz timersclk,
  * and enable Time Counter
  */
-#define CFG_TMCNTSC     (TMCNTSC_SEC|TMCNTSC_ALR|TMCNTSC_TCF|TMCNTSC_TCE)
+#define CONFIG_SYS_TMCNTSC     (TMCNTSC_SEC|TMCNTSC_ALR|TMCNTSC_TCF|TMCNTSC_TCE)
 
 /*-----------------------------------------------------------------------
  * PISCR - Periodic Interrupt Status and Control                 4-42
@@ -447,20 +447,20 @@
  * Clear Periodic Interrupt Status, Set 32KHz timersclk, and enable
  * Periodic timer
  */
-#define CFG_PISCR       (PISCR_PS|PISCR_PTF|PISCR_PTE)
+#define CONFIG_SYS_PISCR       (PISCR_PS|PISCR_PTF|PISCR_PTE)
 
 /*-----------------------------------------------------------------------
  * SCCR - System Clock Control                                   9-8
  *-----------------------------------------------------------------------
  * Ensure DFBRG is Divide by 16
  */
-#define CFG_SCCR        (0x00000028 | SCCR_DFBRG01)
+#define CONFIG_SYS_SCCR        (0x00000028 | SCCR_DFBRG01)
 
 /*-----------------------------------------------------------------------
  * RCCR - RISC Controller Configuration                         13-7
  *-----------------------------------------------------------------------
  */
-#define CFG_RCCR        0
+#define CONFIG_SYS_RCCR        0
 
 /*
  * Init Memory Controller:
@@ -479,60 +479,60 @@
 /* Minimum mask to separate preliminary
  * address ranges for CS[0:2]
  */
-#define CFG_GLOBAL_SDRAM_LIMIT	(32<<20)	/* less than 32 MB */
+#define CONFIG_SYS_GLOBAL_SDRAM_LIMIT	(32<<20)	/* less than 32 MB */
 
-#define CFG_MPTPR       0x6600
+#define CONFIG_SYS_MPTPR       0x6600
 
 /*-----------------------------------------------------------------------------
  * Address for Mode Register Set (MRS) command
  *-----------------------------------------------------------------------------
  */
-#define CFG_MRS_OFFS	0x00000110
+#define CONFIG_SYS_MRS_OFFS	0x00000110
 
 
 /* Bank 0 - FLASH
  */
-#define CFG_BR0_PRELIM  ((CFG_FLASH_BASE & BRx_BA_MSK)  |\
+#define CONFIG_SYS_BR0_PRELIM  ((CONFIG_SYS_FLASH_BASE & BRx_BA_MSK)  |\
 			 BRx_PS_8                       |\
 			 BRx_MS_GPCM_P                  |\
 			 BRx_V)
 
-#define CFG_OR0_PRELIM  (MEG_TO_AM(CFG_FLASH_SIZE)      |\
+#define CONFIG_SYS_OR0_PRELIM  (MEG_TO_AM(CONFIG_SYS_FLASH_SIZE)      |\
 			 ORxG_SCY_6_CLK                 )
 
 #if defined(CONFIG_CMD_NAND)
 /* Bank 1 - NAND Flash
 */
-#define	CFG_NAND_BASE		CFG_NAND0_BASE
-#define	CFG_NAND_SIZE		0x8000
+#define	CONFIG_SYS_NAND_BASE		CONFIG_SYS_NAND0_BASE
+#define	CONFIG_SYS_NAND_SIZE		0x8000
 
-#define CFG_OR_TIMING_NAND	0x000036
+#define CONFIG_SYS_OR_TIMING_NAND	0x000036
 
-#define CFG_BR1_PRELIM  ((CFG_NAND_BASE & BRx_BA_MSK) | BRx_PS_8 | BRx_MS_GPCM_P | BRx_V  )
-#define CFG_OR1_PRELIM  (P2SZ_TO_AM(CFG_NAND_SIZE) | CFG_OR_TIMING_NAND )
+#define CONFIG_SYS_BR1_PRELIM  ((CONFIG_SYS_NAND_BASE & BRx_BA_MSK) | BRx_PS_8 | BRx_MS_GPCM_P | BRx_V  )
+#define CONFIG_SYS_OR1_PRELIM  (P2SZ_TO_AM(CONFIG_SYS_NAND_SIZE) | CONFIG_SYS_OR_TIMING_NAND )
 #endif
 
 /* Bank 2 - 60x bus SDRAM
  */
-#define CFG_PSRT        0x20
-#define CFG_LSRT        0x20
+#define CONFIG_SYS_PSRT        0x20
+#define CONFIG_SYS_LSRT        0x20
 
-#define CFG_BR2_PRELIM  ((CFG_SDRAM_BASE & BRx_BA_MSK)  |\
+#define CONFIG_SYS_BR2_PRELIM  ((CONFIG_SYS_SDRAM_BASE & BRx_BA_MSK)  |\
 			 BRx_PS_32                      |\
 			 BRx_MS_SDRAM_P                 |\
 			 BRx_V)
 
-#define CFG_OR2_PRELIM	CFG_OR2
+#define CONFIG_SYS_OR2_PRELIM	CONFIG_SYS_OR2
 
 
 /* SDRAM initialization values
 */
-#define CFG_OR2    ((~(CFG_GLOBAL_SDRAM_LIMIT-1) & ORxS_SDAM_MSK) |\
+#define CONFIG_SYS_OR2    ((~(CONFIG_SYS_GLOBAL_SDRAM_LIMIT-1) & ORxS_SDAM_MSK) |\
 			 ORxS_BPD_4                     |\
 			 ORxS_ROWST_PBI0_A9		|\
 			 ORxS_NUMR_12)
 
-#define CFG_PSDMR  (PSDMR_SDAM_A14_IS_A5 |\
+#define CONFIG_SYS_PSDMR  (PSDMR_SDAM_A14_IS_A5 |\
 			 PSDMR_BSMA_A15_A17           |\
 			 PSDMR_SDA10_PBI0_A10		|\
 			 PSDMR_RFRC_5_CLK               |\
@@ -546,7 +546,7 @@
 /* Bank 3 - UART
 */
 
-#define CFG_BR3_PRELIM  ((CFG_UART_BASE & BRx_BA_MSK) | BRx_PS_8 | BRx_MS_GPCM_P | BRx_V  )
-#define CFG_OR3_PRELIM  (((-CFG_UART_SIZE) & ORxG_AM_MSK) | ORxG_CSNT | ORxG_SCY_1_CLK | ORxG_TRLX )
+#define CONFIG_SYS_BR3_PRELIM  ((CONFIG_SYS_UART_BASE & BRx_BA_MSK) | BRx_PS_8 | BRx_MS_GPCM_P | BRx_V  )
+#define CONFIG_SYS_OR3_PRELIM  (((-CONFIG_SYS_UART_SIZE) & ORxG_AM_MSK) | ORxG_CSNT | ORxG_SCY_1_CLK | ORxG_TRLX )
 
 #endif	/* __CONFIG_H */
diff --git a/include/configs/IP860.h b/include/configs/IP860.h
index e6c7fe656..b9c57132d 100644
--- a/include/configs/IP860.h
+++ b/include/configs/IP860.h
@@ -52,7 +52,7 @@
 	"bootm"
 
 #define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
-#undef	CFG_LOADS_BAUD_CHANGE		/* don't allow baudrate change	*/
+#undef	CONFIG_SYS_LOADS_BAUD_CHANGE		/* don't allow baudrate change	*/
 
 #undef	CONFIG_WATCHDOG			/* watchdog disabled		*/
 
@@ -77,14 +77,14 @@
 #define I2C_DELAY	udelay(5)	/* 1/4 I2C clock duration */
 
 
-# define CFG_I2C_SPEED		50000
-# define CFG_I2C_SLAVE		0xFE
-# define CFG_I2C_EEPROM_ADDR	0x50	/* EEPROM X24C16		*/
-# define CFG_I2C_EEPROM_ADDR_LEN 1	/* bytes of address		*/
+# define CONFIG_SYS_I2C_SPEED		50000
+# define CONFIG_SYS_I2C_SLAVE		0xFE
+# define CONFIG_SYS_I2C_EEPROM_ADDR	0x50	/* EEPROM X24C16		*/
+# define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1	/* bytes of address		*/
 /* mask of address bits that overflow into the "EEPROM chip address"    */
-#define CFG_I2C_EEPROM_ADDR_OVERFLOW	0x07
-#define CFG_EEPROM_PAGE_WRITE_BITS	4
-#define CFG_EEPROM_PAGE_WRITE_DELAY_MS	10	/* takes up to 10 msec */
+#define CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW	0x07
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS	4
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	10	/* takes up to 10 msec */
 
 #define	CONFIG_TIMESTAMP		/* Print image info with timestamp */
 
@@ -111,27 +111,27 @@
 /*
  * Miscellaneous configurable options
  */
-#define	CFG_LONGHELP			/* undef to save memory		*/
-#define	CFG_PROMPT	"=> "		/* Monitor Command Prompt	*/
+#define	CONFIG_SYS_LONGHELP			/* undef to save memory		*/
+#define	CONFIG_SYS_PROMPT	"=> "		/* Monitor Command Prompt	*/
 #if defined(CONFIG_CMD_KGDB)
-#define	CFG_CBSIZE	1024		/* Console I/O Buffer Size	*/
+#define	CONFIG_SYS_CBSIZE	1024		/* Console I/O Buffer Size	*/
 #else
-#define	CFG_CBSIZE	256		/* Console I/O Buffer Size	*/
+#define	CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size	*/
 #endif
-#define	CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define	CFG_MAXARGS	16		/* max number of command args	*/
-#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+#define	CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define	CONFIG_SYS_MAXARGS	16		/* max number of command args	*/
+#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
 
-#define CFG_MEMTEST_START	0x00100000	/* memtest works on	*/
-#define CFG_MEMTEST_END		0x00F00000	/* 1 ... 15MB in DRAM	*/
+#define CONFIG_SYS_MEMTEST_START	0x00100000	/* memtest works on	*/
+#define CONFIG_SYS_MEMTEST_END		0x00F00000	/* 1 ... 15MB in DRAM	*/
 
-#define	CFG_LOAD_ADDR		0x00100000	/* default load address	*/
+#define	CONFIG_SYS_LOAD_ADDR		0x00100000	/* default load address	*/
 
-#define	CFG_PIO_MODE		0	/* IDE interface in PIO Mode 0	*/
+#define	CONFIG_SYS_PIO_MODE		0	/* IDE interface in PIO Mode 0	*/
 
-#define	CFG_HZ			1000	/* decrementer freq: 1 ms ticks	*/
+#define	CONFIG_SYS_HZ			1000	/* decrementer freq: 1 ms ticks	*/
 
-#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
 
 /*
  * Low Level Configuration Settings
@@ -141,73 +141,73 @@
 /*-----------------------------------------------------------------------
  * Internal Memory Mapped Register
  */
-#define CFG_IMMR		0xF1000000	/* Non-standard value!!	*/
+#define CONFIG_SYS_IMMR		0xF1000000	/* Non-standard value!!	*/
 
 /*-----------------------------------------------------------------------
  * Definitions for initial stack pointer and data area (in DPRAM)
  */
-#define CFG_INIT_RAM_ADDR	CFG_IMMR
-#define	CFG_INIT_RAM_END	0x2F00	/* End of used area in DPRAM	*/
-#define	CFG_GBL_DATA_SIZE	64  /* size in bytes reserved for initial data */
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define	CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_IMMR
+#define	CONFIG_SYS_INIT_RAM_END	0x2F00	/* End of used area in DPRAM	*/
+#define	CONFIG_SYS_GBL_DATA_SIZE	64  /* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define	CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
 /*-----------------------------------------------------------------------
  * Start addresses for the final memory configuration
  * (Set up by the startup code)
- * Please note that CFG_SDRAM_BASE _must_ start at 0
+ * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
  */
-#define	CFG_SDRAM_BASE		0x00000000
-#define CFG_FLASH_BASE		0x10000000
+#define	CONFIG_SYS_SDRAM_BASE		0x00000000
+#define CONFIG_SYS_FLASH_BASE		0x10000000
 #ifdef	DEBUG
-#define	CFG_MONITOR_LEN		(512 << 10)	/* Reserve 512 kB for Monitor	*/
+#define	CONFIG_SYS_MONITOR_LEN		(512 << 10)	/* Reserve 512 kB for Monitor	*/
 #else
 #if 0 /* need more space for I2C tests */
-#define	CFG_MONITOR_LEN		(128 << 10)	/* Reserve 128 kB for Monitor	*/
+#define	CONFIG_SYS_MONITOR_LEN		(128 << 10)	/* Reserve 128 kB for Monitor	*/
 #else
-#define	CFG_MONITOR_LEN		(256 << 10)
+#define	CONFIG_SYS_MONITOR_LEN		(256 << 10)
 #endif
 #endif
-#define CFG_MONITOR_BASE	CFG_FLASH_BASE
-#define	CFG_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/
+#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_FLASH_BASE
+#define	CONFIG_SYS_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/
 
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define	CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux	*/
+#define	CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux	*/
 /*-----------------------------------------------------------------------
  * FLASH organization
  */
-#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
-#define CFG_MAX_FLASH_SECT	124	/* max number of sectors on one chip	*/
+#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
+#define CONFIG_SYS_MAX_FLASH_SECT	124	/* max number of sectors on one chip	*/
 
-#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
-#define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
+#define CONFIG_SYS_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
+#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
 
-#undef	CFG_ENV_IS_IN_FLASH
-#undef	CFG_ENV_IS_IN_NVRAM
-#undef  CFG_ENV_IS_IN_NVRAM
+#undef	CONFIG_ENV_IS_IN_FLASH
+#undef	CONFIG_ENV_IS_IN_NVRAM
+#undef  CONFIG_ENV_IS_IN_NVRAM
 #undef	DEBUG_I2C
-#define	CFG_ENV_IS_IN_EEPROM
+#define	CONFIG_ENV_IS_IN_EEPROM
 
-#ifdef	CFG_ENV_IS_IN_NVRAM
-#define CFG_ENV_ADDR		0x20000000	/* use SRAM	*/
-#define CFG_ENV_SIZE		(16<<10)	/* use 16 kB	*/
-#endif	/* CFG_ENV_IS_IN_NVRAM */
+#ifdef	CONFIG_ENV_IS_IN_NVRAM
+#define CONFIG_ENV_ADDR		0x20000000	/* use SRAM	*/
+#define CONFIG_ENV_SIZE		(16<<10)	/* use 16 kB	*/
+#endif	/* CONFIG_ENV_IS_IN_NVRAM */
 
-#ifdef	CFG_ENV_IS_IN_EEPROM
-#define CFG_ENV_OFFSET		 512	/* Leave 512 bytes free for other data	*/
-#define CFG_ENV_SIZE		1536	/* Use remaining space			*/
-#endif	/* CFG_ENV_IS_IN_EEPROM */
+#ifdef	CONFIG_ENV_IS_IN_EEPROM
+#define CONFIG_ENV_OFFSET		 512	/* Leave 512 bytes free for other data	*/
+#define CONFIG_ENV_SIZE		1536	/* Use remaining space			*/
+#endif	/* CONFIG_ENV_IS_IN_EEPROM */
 
 /*-----------------------------------------------------------------------
  * Cache Configuration
  */
-#define CFG_CACHELINE_SIZE	16	/* For all MPC8xx CPUs			*/
+#define CONFIG_SYS_CACHELINE_SIZE	16	/* For all MPC8xx CPUs			*/
 #if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT	4	/* log base 2 of the above value	*/
+#define CONFIG_SYS_CACHELINE_SHIFT	4	/* log base 2 of the above value	*/
 #endif
 
 /*-----------------------------------------------------------------------
@@ -218,10 +218,10 @@
  * +0x0004
  */
 #if defined(CONFIG_WATCHDOG)
-#define CFG_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
+#define CONFIG_SYS_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
 			 SYPCR_SWE  | SYPCR_SWRI| SYPCR_SWP)
 #else
-#define CFG_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
+#define CONFIG_SYS_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
 #endif
 
 /*-----------------------------------------------------------------------
@@ -229,7 +229,7 @@
  *-----------------------------------------------------------------------
  * +0x0000 => 0x80600800
  */
-#define CFG_SIUMCR	(SIUMCR_EARB   | SIUMCR_EARP0 | \
+#define CONFIG_SYS_SIUMCR	(SIUMCR_EARB   | SIUMCR_EARP0 | \
 			 SIUMCR_DBGC11 | SIUMCR_MLRC10)
 
 /*-----------------------------------------------------------------------
@@ -247,7 +247,7 @@ extern  unsigned long           ip860_get_clk_freq (void);
  * Clear Reference Interrupt Status, Timebase freezing enabled
  * +0x0200 => 0x00C2
  */
-#define CFG_TBSCR	(TBSCR_REFA | TBSCR_REFB | TBSCR_TBF)
+#define CONFIG_SYS_TBSCR	(TBSCR_REFA | TBSCR_REFB | TBSCR_TBF)
 
 /*-----------------------------------------------------------------------
  * PISCR - Periodic Interrupt Status and Control		11-31
@@ -255,7 +255,7 @@ extern  unsigned long           ip860_get_clk_freq (void);
  * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
  * +0x0240 => 0x0082
  */
-#define CFG_PISCR	(PISCR_PS | PISCR_PITF)
+#define CONFIG_SYS_PISCR	(PISCR_PS | PISCR_PITF)
 
 /*-----------------------------------------------------------------------
  * PLPRCR - PLL, Low-Power, and Reset Control Register		15-30
@@ -264,7 +264,7 @@ extern  unsigned long           ip860_get_clk_freq (void);
  * interrupt status bit, set PLL multiplication factor !
  */
 /* +0x0286 => was: 0x0000D000 */
-#define CFG_PLPRCR							\
+#define CONFIG_SYS_PLPRCR							\
 		(	PLPRCR_SPLSS | PLPRCR_TEXPS | PLPRCR_TMIST |	\
 			/*PLPRCR_CSRC|*/ PLPRCR_LPM_NORMAL |		\
 			PLPRCR_CSR   | PLPRCR_LOLRE /*|PLPRCR_FIOPD*/	\
@@ -277,7 +277,7 @@ extern  unsigned long           ip860_get_clk_freq (void);
  * power management and some other internal clocks
  */
 #define SCCR_MASK	SCCR_EBDF11
-#define CFG_SCCR	(SCCR_COM00	|   SCCR_TBS	  |	\
+#define CONFIG_SYS_SCCR	(SCCR_COM00	|   SCCR_TBS	  |	\
 			 SCCR_RTDIV	|   SCCR_RTSEL	  |	\
 			 /*SCCR_CRQEN|*/  /*SCCR_PRQEN|*/	\
 			 SCCR_EBDF00	|   SCCR_DFSYNC00 |	\
@@ -289,7 +289,7 @@ extern  unsigned long           ip860_get_clk_freq (void);
  *-----------------------------------------------------------------------
  */
 /* +0x0220 => 0x00C3 */
-#define CFG_RTCSC	(RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE)
+#define CONFIG_SYS_RTCSC	(RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE)
 
 
 /*-----------------------------------------------------------------------
@@ -297,20 +297,20 @@ extern  unsigned long           ip860_get_clk_freq (void);
  *-----------------------------------------------------------------------
  */
 /* +0x09C4 => TIMEP=1 */
-#define CFG_RCCR 0x0100
+#define CONFIG_SYS_RCCR 0x0100
 
 /*-----------------------------------------------------------------------
  * RMDS - RISC Microcode Development Support Control Register
  *-----------------------------------------------------------------------
  */
-#define CFG_RMDS 0
+#define CONFIG_SYS_RMDS 0
 
 /*-----------------------------------------------------------------------
  * DER - Debug Event Register
  *-----------------------------------------------------------------------
  *
  */
-#define CFG_DER	0
+#define CONFIG_SYS_DER	0
 
 /*
  * Init Memory Controller:
@@ -322,9 +322,9 @@ extern  unsigned long           ip860_get_clk_freq (void);
  */
 
 /* periodic timer for refresh */
-#define CFG_MAMR_PTA	0xC3
+#define CONFIG_SYS_MAMR_PTA	0xC3
 
-#define CFG_MAMR	((CFG_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
+#define CONFIG_SYS_MAMR	((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
 			 MAMR_AMA_TYPE_0 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 |	\
 			 MAMR_RLFA_1X	 | MAMR_WLFA_1X	   | MAMR_TLFA_4X)
 /*
@@ -337,18 +337,18 @@ extern  unsigned long           ip860_get_clk_freq (void);
  * but not too much to meddle with FLASH accesses
  */
 /* allow for max 8 MB of Flash */
-#define CFG_REMAP_OR_AM		0xFF800000	/* OR addr mask */
-#define CFG_PRELIM_OR_AM	0xFF800000	/* OR addr mask */
+#define CONFIG_SYS_REMAP_OR_AM		0xFF800000	/* OR addr mask */
+#define CONFIG_SYS_PRELIM_OR_AM	0xFF800000	/* OR addr mask */
 
-#define CFG_OR_TIMING_FLASH	(OR_CSNT_SAM | OR_ACS_DIV2 | OR_BI | OR_SCY_6_CLK)
+#define CONFIG_SYS_OR_TIMING_FLASH	(OR_CSNT_SAM | OR_ACS_DIV2 | OR_BI | OR_SCY_6_CLK)
 
-#define CFG_OR0_REMAP	(CFG_REMAP_OR_AM  | CFG_OR_TIMING_FLASH)
-#define CFG_OR0_PRELIM	(CFG_PRELIM_OR_AM | CFG_OR_TIMING_FLASH)
+#define CONFIG_SYS_OR0_REMAP	(CONFIG_SYS_REMAP_OR_AM  | CONFIG_SYS_OR_TIMING_FLASH)
+#define CONFIG_SYS_OR0_PRELIM	(CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_FLASH)
 /* 16 bit, bank valid */
-#define CFG_BR0_PRELIM	((FLASH_BASE & BR_BA_MSK) | BR_PS_32 | BR_V )
+#define CONFIG_SYS_BR0_PRELIM	((FLASH_BASE & BR_BA_MSK) | BR_PS_32 | BR_V )
 
-#define CFG_OR1_PRELIM	CFG_OR0_PRELIM
-#define CFG_BR1_PRELIM	CFG_BR0_PRELIM
+#define CONFIG_SYS_OR1_PRELIM	CONFIG_SYS_OR0_PRELIM
+#define CONFIG_SYS_BR1_PRELIM	CONFIG_SYS_BR0_PRELIM
 
 /*
  * BR2/OR2 - SDRAM
@@ -359,46 +359,46 @@ extern  unsigned long           ip860_get_clk_freq (void);
 
 #define SDRAM_MAX_SIZE		0x04000000	/* max 64 MB SDRAM */
 
-#define CFG_OR2		(SDRAM_PRELIM_OR_AM | SDRAM_TIMING )
-#define CFG_BR2		((SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V )
+#define CONFIG_SYS_OR2		(SDRAM_PRELIM_OR_AM | SDRAM_TIMING )
+#define CONFIG_SYS_BR2		((SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V )
 
 /*
  * BR3/OR3 - SRAM (16 bit)
  */
 #define	SRAM_BASE	0x20000000
-#define CFG_OR3		0xFFF00130		/* BI/SCY = 5/TRLX (internal) */
-#define CFG_BR3		((SRAM_BASE & BR_BA_MSK) | BR_PS_16 | BR_V)
-#define SRAM_SIZE	(1 + (~(CFG_OR3 & BR_BA_MSK)))
-#define CFG_OR3_PRELIM	CFG_OR3			/* Make sure to map early */
-#define CFG_BR3_PRELIM	CFG_BR3			/* in case it's used for ENV */
+#define CONFIG_SYS_OR3		0xFFF00130		/* BI/SCY = 5/TRLX (internal) */
+#define CONFIG_SYS_BR3		((SRAM_BASE & BR_BA_MSK) | BR_PS_16 | BR_V)
+#define SRAM_SIZE	(1 + (~(CONFIG_SYS_OR3 & BR_BA_MSK)))
+#define CONFIG_SYS_OR3_PRELIM	CONFIG_SYS_OR3			/* Make sure to map early */
+#define CONFIG_SYS_BR3_PRELIM	CONFIG_SYS_BR3			/* in case it's used for ENV */
 
 /*
  * BR4/OR4 - Board Control & Status (8 bit)
  */
 #define	BCSR_BASE	0xFC000000
-#define CFG_OR4		0xFFFF0120		/* BI (internal) */
-#define CFG_BR4		((BCSR_BASE & BR_BA_MSK) | BR_PS_8 | BR_V)
+#define CONFIG_SYS_OR4		0xFFFF0120		/* BI (internal) */
+#define CONFIG_SYS_BR4		((BCSR_BASE & BR_BA_MSK) | BR_PS_8 | BR_V)
 
 /*
  * BR5/OR5 - IP Slot A/B (16 bit)
  */
 #define	IP_SLOT_BASE	0x40000000
-#define CFG_OR5		0xFE00010C		/* SETA/TRLX/BI/ SCY=0 (external) */
-#define CFG_BR5		((IP_SLOT_BASE & BR_BA_MSK) | BR_PS_16 | BR_V)
+#define CONFIG_SYS_OR5		0xFE00010C		/* SETA/TRLX/BI/ SCY=0 (external) */
+#define CONFIG_SYS_BR5		((IP_SLOT_BASE & BR_BA_MSK) | BR_PS_16 | BR_V)
 
 /*
  * BR6/OR6 - VME STD  (16 bit)
  */
 #define	VME_STD_BASE	0xFE000000
-#define CFG_OR6		0xFF00010C		/* SETA/TRLX/BI/SCY=0  (external) */
-#define CFG_BR6		((VME_STD_BASE & BR_BA_MSK) | BR_PS_16 | BR_V)
+#define CONFIG_SYS_OR6		0xFF00010C		/* SETA/TRLX/BI/SCY=0  (external) */
+#define CONFIG_SYS_BR6		((VME_STD_BASE & BR_BA_MSK) | BR_PS_16 | BR_V)
 
 /*
  * BR7/OR7 - SHORT I/O + RTC + IACK  (16 bit)
  */
 #define VME_SHORT_BASE	0xFF000000
-#define CFG_OR7		0xFF00010C		/* SETA/TRLX/BI/ SCY=0 (external) */
-#define CFG_BR7		((VME_SHORT_BASE & BR_BA_MSK) | BR_PS_16 | BR_V)
+#define CONFIG_SYS_OR7		0xFF00010C		/* SETA/TRLX/BI/ SCY=0 (external) */
+#define CONFIG_SYS_BR7		((VME_SHORT_BASE & BR_BA_MSK) | BR_PS_16 | BR_V)
 
 /*-----------------------------------------------------------------------
  * Board Control and Status Region:
diff --git a/include/configs/IPHASE4539.h b/include/configs/IPHASE4539.h
index 7d564a095..3cb6cf7dd 100644
--- a/include/configs/IPHASE4539.h
+++ b/include/configs/IPHASE4539.h
@@ -80,10 +80,10 @@
  * - Select bus for bd/buffers (see 28-13)
  * - Half duplex
  */
-# define CFG_CMXFCR_MASK	(CMXFCR_FC3 | CMXFCR_RF3CS_MSK | CMXFCR_TF3CS_MSK)
-# define CFG_CMXFCR_VALUE	(CMXFCR_RF3CS_CLK14 | CMXFCR_TF3CS_CLK16)
-# define CFG_CPMFCR_RAMTYPE	0
-# define CFG_FCC_PSMR		(FCC_PSMR_FDE|FCC_PSMR_LPB)
+# define CONFIG_SYS_CMXFCR_MASK	(CMXFCR_FC3 | CMXFCR_RF3CS_MSK | CMXFCR_TF3CS_MSK)
+# define CONFIG_SYS_CMXFCR_VALUE	(CMXFCR_RF3CS_CLK14 | CMXFCR_TF3CS_CLK16)
+# define CONFIG_SYS_CPMFCR_RAMTYPE	0
+# define CONFIG_SYS_FCC_PSMR		(FCC_PSMR_FDE|FCC_PSMR_LPB)
 
 #endif	/* CONFIG_ETHER_ON_FCC, CONFIG_ETHER_INDEX */
 
@@ -110,8 +110,8 @@
  */
 #undef  CONFIG_HARD_I2C			/* I2C with hardware support	*/
 #define CONFIG_SOFT_I2C		1	/* I2C bit-banged		*/
-#define CFG_I2C_SPEED		400000	/* I2C speed and slave address	*/
-#define CFG_I2C_SLAVE		0x7F
+#define CONFIG_SYS_I2C_SPEED		400000	/* I2C speed and slave address	*/
+#define CONFIG_SYS_I2C_SLAVE		0x7F
 
 /*
  * Software (bit-bang) I2C driver configuration
@@ -152,30 +152,30 @@
 /*-----------------------------------------------------------------------
  * Miscellaneous configurable options
  */
-#define CFG_LONGHELP			/* undef to save memory		*/
-#define CFG_PROMPT	"=> "		/* Monitor Command Prompt	*/
+#define CONFIG_SYS_LONGHELP			/* undef to save memory		*/
+#define CONFIG_SYS_PROMPT	"=> "		/* Monitor Command Prompt	*/
 #if defined(CONFIG_CMD_KGDB)
-#define CFG_CBSIZE	1024		/* Console I/O Buffer Size	*/
+#define CONFIG_SYS_CBSIZE	1024		/* Console I/O Buffer Size	*/
 #else
-#define CFG_CBSIZE	256		/* Console I/O Buffer Size	*/
+#define CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size	*/
 #endif
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16)  /* Print Buffer Size */
-#define CFG_MAXARGS	16		/* max number of command args	*/
-#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)  /* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS	16		/* max number of command args	*/
+#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
 
-#define CFG_MEMTEST_START	0x00100000	/* memtest works on	*/
-#define CFG_MEMTEST_END		0x00F00000	/* 1 ... 15 MB in DRAM	*/
+#define CONFIG_SYS_MEMTEST_START	0x00100000	/* memtest works on	*/
+#define CONFIG_SYS_MEMTEST_END		0x00F00000	/* 1 ... 15 MB in DRAM	*/
 
 #define CONFIG_CLOCKS_IN_MHZ	1	/* clocks passed to Linux in MHz */
 					/* for versions < 2.4.5-pre5	 */
 
-#define CFG_LOAD_ADDR		0x100000	/* default load address	*/
+#define CONFIG_SYS_LOAD_ADDR		0x100000	/* default load address	*/
 
-#define CFG_HZ			1000	/* decrementer freq: 1 ms ticks	*/
+#define CONFIG_SYS_HZ			1000	/* decrementer freq: 1 ms ticks	*/
 
-#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
 
-#define CFG_RESET_ADDRESS	0x04400000
+#define CONFIG_SYS_RESET_ADDRESS	0x04400000
 
 #define CONFIG_MISC_INIT_R	1	/* We need misc_init_r()	*/
 
@@ -184,70 +184,70 @@
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define CFG_BOOTMAPSZ		(8 << 20) /* Initial Memory map for Linux */
+#define CONFIG_SYS_BOOTMAPSZ		(8 << 20) /* Initial Memory map for Linux */
 
 /*-----------------------------------------------------------------------
  * Start addresses for the final memory configuration (Setup by the
- * startup code). Please note that CFG_SDRAM_BASE _must_ start at 0.
+ * startup code). Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0.
  */
-#define CFG_SDRAM_BASE		0x00000000
-#define CFG_FLASH_BASE		0xFF800000
+#define CONFIG_SYS_SDRAM_BASE		0x00000000
+#define CONFIG_SYS_FLASH_BASE		0xFF800000
 
-#define CFG_MONITOR_BASE	TEXT_BASE
-#define CFG_MONITOR_LEN		(256 << 10)     /* Reserve 256 kB for Monitor  */
-#define CFG_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc() */
+#define CONFIG_SYS_MONITOR_BASE	TEXT_BASE
+#define CONFIG_SYS_MONITOR_LEN		(256 << 10)     /* Reserve 256 kB for Monitor  */
+#define CONFIG_SYS_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc() */
 
 /*-----------------------------------------------------------------------
  * FLASH organization
  */
-#define CFG_MAX_FLASH_BANKS	1	/* max num of memory banks	*/
-#define CFG_MAX_FLASH_SECT	64	/* max num of sects on one chip */
-#define CFG_MAX_FLASH_SIZE	(CFG_MAX_FLASH_SECT * 0x10000)	/* 4 MB */
+#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max num of memory banks	*/
+#define CONFIG_SYS_MAX_FLASH_SECT	64	/* max num of sects on one chip */
+#define CONFIG_SYS_MAX_FLASH_SIZE	(CONFIG_SYS_MAX_FLASH_SECT * 0x10000)	/* 4 MB */
 
-#define CFG_FLASH_ERASE_TOUT	2400000	/* Flash Erase Timeout (in ms)	*/
-#define CFG_FLASH_WRITE_TOUT	500	/* Flash Write Timeout (in ms)	*/
+#define CONFIG_SYS_FLASH_ERASE_TOUT	2400000	/* Flash Erase Timeout (in ms)	*/
+#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Flash Write Timeout (in ms)	*/
 
 /* Environment in FLASH, there is little space left in Serial EEPROM */
-#define CFG_ENV_IS_IN_FLASH	1
-#define CFG_ENV_SECT_SIZE	0x10000 /* We use one complete sector	*/
-#define CFG_ENV_ADDR		(CFG_FLASH_BASE + 0x10000) /* 2. sector */
+#define CONFIG_ENV_IS_IN_FLASH	1
+#define CONFIG_ENV_SECT_SIZE	0x10000 /* We use one complete sector	*/
+#define CONFIG_ENV_ADDR		(CONFIG_SYS_FLASH_BASE + 0x10000) /* 2. sector */
 
 
 /*-----------------------------------------------------------------------
  * Hard Reset Configuration Words
  *
- * if you change bits in the HRCW, you must also change the CFG_*
+ * if you change bits in the HRCW, you must also change the CONFIG_SYS_*
  * defines for the various registers affected by the HRCW e.g. changing
- * HRCW_DPPCxx requires you to also change CFG_SIUMCR.
+ * HRCW_DPPCxx requires you to also change CONFIG_SYS_SIUMCR.
  */
-#define CFG_HRCW_MASTER ( ( HRCW_BPS01 | HRCW_EBM )		|\
+#define CONFIG_SYS_HRCW_MASTER ( ( HRCW_BPS01 | HRCW_EBM )		|\
 			  ( HRCW_L2CPC10 | HRCW_ISB110 )	|\
 			  ( HRCW_MMR11 | HRCW_APPC10 )		|\
 			  ( HRCW_CS10PC01 | HRCW_MODCK_H0101 )	 \
 			) /* 0x14863245 */
 
 /* no slaves */
-#define CFG_HRCW_SLAVE1 0
-#define CFG_HRCW_SLAVE2 0
-#define CFG_HRCW_SLAVE3 0
-#define CFG_HRCW_SLAVE4 0
-#define CFG_HRCW_SLAVE5 0
-#define CFG_HRCW_SLAVE6 0
-#define CFG_HRCW_SLAVE7 0
+#define CONFIG_SYS_HRCW_SLAVE1 0
+#define CONFIG_SYS_HRCW_SLAVE2 0
+#define CONFIG_SYS_HRCW_SLAVE3 0
+#define CONFIG_SYS_HRCW_SLAVE4 0
+#define CONFIG_SYS_HRCW_SLAVE5 0
+#define CONFIG_SYS_HRCW_SLAVE6 0
+#define CONFIG_SYS_HRCW_SLAVE7 0
 
 /*-----------------------------------------------------------------------
  * Internal Memory Mapped Register
  */
-#define CFG_IMMR		0xFF000000 /* We keep original value */
+#define CONFIG_SYS_IMMR		0xFF000000 /* We keep original value */
 
 /*-----------------------------------------------------------------------
  * Definitions for initial stack pointer and data area (in DPRAM)
  */
-#define CFG_INIT_RAM_ADDR	CFG_IMMR
-#define CFG_INIT_RAM_END	0x4000	/* End of used area in DPRAM	*/
-#define CFG_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_IMMR
+#define CONFIG_SYS_INIT_RAM_END	0x4000	/* End of used area in DPRAM	*/
+#define CONFIG_SYS_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
 /*-----------------------------------------------------------------------
  * Internal Definitions
@@ -261,9 +261,9 @@
 /*-----------------------------------------------------------------------
  * Cache Configuration
  */
-#define CFG_CACHELINE_SIZE	32     /* For MPC8260 CPU		*/
+#define CONFIG_SYS_CACHELINE_SIZE	32     /* For MPC8260 CPU		*/
 #if defined(CONFIG_CMD_KGDB)
-# define CFG_CACHELINE_SHIFT	5      /* log base 2 of the above value */
+# define CONFIG_SYS_CACHELINE_SHIFT	5      /* log base 2 of the above value */
 #endif
 
 /*-----------------------------------------------------------------------
@@ -273,29 +273,29 @@
  *
  * HID1 has only read-only information - nothing to set.
  */
-#define CFG_HID0_INIT	(HID0_ICE|HID0_DCE|HID0_ICFI|HID0_DCI|\
+#define CONFIG_SYS_HID0_INIT	(HID0_ICE|HID0_DCE|HID0_ICFI|HID0_DCI|\
 			 HID0_IFEM|HID0_ABE)
-#define CFG_HID0_FINAL	(HID0_IFEM|HID0_ABE)
-#define CFG_HID2	0
+#define CONFIG_SYS_HID0_FINAL	(HID0_IFEM|HID0_ABE)
+#define CONFIG_SYS_HID2	0
 
 /*-----------------------------------------------------------------------
  * RMR - Reset Mode Register					 5-5
  *-----------------------------------------------------------------------
  * turn on Checkstop Reset Enable
  */
-#define CFG_RMR		RMR_CSRE
+#define CONFIG_SYS_RMR		RMR_CSRE
 
 /*-----------------------------------------------------------------------
  * BCR - Bus Configuration					 4-25
  *-----------------------------------------------------------------------
  */
-#define CFG_BCR		0xA01C0000
+#define CONFIG_SYS_BCR		0xA01C0000
 
 /*-----------------------------------------------------------------------
  * SIUMCR - SIU Module Configuration				 4-31
  *-----------------------------------------------------------------------
  */
-#define CFG_SIUMCR	0X4205C000
+#define CONFIG_SYS_SIUMCR	0X4205C000
 
 /*-----------------------------------------------------------------------
  * SYPCR - System Protection Control				 4-35
@@ -304,10 +304,10 @@
  * Watchdog & Bus Monitor Timer max, 60x Bus Monitor enable
  */
 #if defined (CONFIG_WATCHDOG)
-#define CFG_SYPCR	(SYPCR_SWTC|SYPCR_BMT|SYPCR_PBME|SYPCR_LBME|\
+#define CONFIG_SYS_SYPCR	(SYPCR_SWTC|SYPCR_BMT|SYPCR_PBME|SYPCR_LBME|\
 			 SYPCR_SWRI|SYPCR_SWP|SYPCR_SWE)
 #else
-#define CFG_SYPCR	(SYPCR_SWTC|SYPCR_BMT|SYPCR_PBME|SYPCR_LBME|\
+#define CONFIG_SYS_SYPCR	(SYPCR_SWTC|SYPCR_BMT|SYPCR_PBME|SYPCR_LBME|\
 			 SYPCR_SWRI|SYPCR_SWP)
 #endif /* CONFIG_WATCHDOG */
 
@@ -317,7 +317,7 @@
  * and enable Time Counter
  *-----------------------------------------------------------------------
  */
-#define CFG_TMCNTSC	(TMCNTSC_SEC|TMCNTSC_ALR|TMCNTSC_TCF|TMCNTSC_TCE)
+#define CONFIG_SYS_TMCNTSC	(TMCNTSC_SEC|TMCNTSC_ALR|TMCNTSC_TCF|TMCNTSC_TCE)
 
 /*-----------------------------------------------------------------------
  * PISCR - Periodic Interrupt Status and Control		 4-42
@@ -325,20 +325,20 @@
  * Clear Periodic Interrupt Status, Set 32KHz timersclk, and enable
  * Periodic timer
  */
-#define CFG_PISCR	(PISCR_PS|PISCR_PTF|PISCR_PTE)
+#define CONFIG_SYS_PISCR	(PISCR_PS|PISCR_PTF|PISCR_PTE)
 
 /*-----------------------------------------------------------------------
  * SCCR - System Clock Control					 9-8
  *-----------------------------------------------------------------------
  * Ensure DFBRG is Divide by 16
  */
-#define CFG_SCCR	0
+#define CONFIG_SYS_SCCR	0
 
 /*-----------------------------------------------------------------------
  * RCCR - RISC Controller Configuration				13-7
  *-----------------------------------------------------------------------
  */
-#define CFG_RCCR	0
+#define CONFIG_SYS_RCCR	0
 
 /*-----------------------------------------------------------------------
  * Init Memory Controller:
@@ -349,13 +349,13 @@
  *  1	60x	SDRAM	64 bit	SDRAM
  */
 
-#define CFG_BR0_PRELIM	((CFG_FLASH_BASE & BRx_BA_MSK) | 0x0801)
-#define CFG_OR0_PRELIM	0xFF800882
-#define CFG_BR1_PRELIM	((CFG_SDRAM_BASE & BRx_BA_MSK) | 0x0041)
-#define CFG_OR1_PRELIM	0xF8002CD0
+#define CONFIG_SYS_BR0_PRELIM	((CONFIG_SYS_FLASH_BASE & BRx_BA_MSK) | 0x0801)
+#define CONFIG_SYS_OR0_PRELIM	0xFF800882
+#define CONFIG_SYS_BR1_PRELIM	((CONFIG_SYS_SDRAM_BASE & BRx_BA_MSK) | 0x0041)
+#define CONFIG_SYS_OR1_PRELIM	0xF8002CD0
 
-#define CFG_PSDMR	0x404A241A
-#define CFG_MPTPR	0x00007400
-#define CFG_PSRT	0x00000007
+#define CONFIG_SYS_PSDMR	0x404A241A
+#define CONFIG_SYS_MPTPR	0x00007400
+#define CONFIG_SYS_PSRT	0x00000007
 
 #endif /* __CONFIG_H */
diff --git a/include/configs/ISPAN.h b/include/configs/ISPAN.h
index 27e46a432..6eb466a72 100644
--- a/include/configs/ISPAN.h
+++ b/include/configs/ISPAN.h
@@ -69,14 +69,14 @@
 
 #if CONFIG_ETHER_INDEX == 3
 
-#define CFG_PHY_ADDR		0
-#define CFG_CMXFCR_VALUE	(CMXFCR_RF3CS_CLK14 | CMXFCR_TF3CS_CLK16)
-#define CFG_CMXFCR_MASK		(CMXFCR_FC3 | CMXFCR_RF3CS_MSK | CMXFCR_TF3CS_MSK)
+#define CONFIG_SYS_PHY_ADDR		0
+#define CONFIG_SYS_CMXFCR_VALUE	(CMXFCR_RF3CS_CLK14 | CMXFCR_TF3CS_CLK16)
+#define CONFIG_SYS_CMXFCR_MASK		(CMXFCR_FC3 | CMXFCR_RF3CS_MSK | CMXFCR_TF3CS_MSK)
 
 #endif /* CONFIG_ETHER_INDEX == 3 */
 
-#define CFG_CPMFCR_RAMTYPE	0
-#define CFG_FCC_PSMR		(FCC_PSMR_FDE | FCC_PSMR_LPB)
+#define CONFIG_SYS_CPMFCR_RAMTYPE	0
+#define CONFIG_SYS_FCC_PSMR		(FCC_PSMR_FDE | FCC_PSMR_LPB)
 
 #define CONFIG_MII				/* MII PHY management		*/
 #define CONFIG_BITBANGMII			/* Bit-bang MII PHY management	*/
@@ -85,18 +85,18 @@
  */
 #define MDIO_PORT		3		/* Port D */
 
-#define CFG_MDIO_PIN		0x00040000	/* PD13 */
-#define CFG_MDC_PIN		0x00080000	/* PD12 */
+#define CONFIG_SYS_MDIO_PIN		0x00040000	/* PD13 */
+#define CONFIG_SYS_MDC_PIN		0x00080000	/* PD12 */
 
-#define MDIO_ACTIVE		(iop->pdir |=  CFG_MDIO_PIN)
-#define MDIO_TRISTATE		(iop->pdir &= ~CFG_MDIO_PIN)
-#define MDIO_READ		((iop->pdat &  CFG_MDIO_PIN) != 0)
+#define MDIO_ACTIVE		(iop->pdir |=  CONFIG_SYS_MDIO_PIN)
+#define MDIO_TRISTATE		(iop->pdir &= ~CONFIG_SYS_MDIO_PIN)
+#define MDIO_READ		((iop->pdat &  CONFIG_SYS_MDIO_PIN) != 0)
 
-#define MDIO(bit)		if(bit) iop->pdat |=  CFG_MDIO_PIN; \
-				else	iop->pdat &= ~CFG_MDIO_PIN
+#define MDIO(bit)		if(bit) iop->pdat |=  CONFIG_SYS_MDIO_PIN; \
+				else	iop->pdat &= ~CONFIG_SYS_MDIO_PIN
 
-#define MDC(bit)		if(bit) iop->pdat |=  CFG_MDC_PIN; \
-				else	iop->pdat &= ~CFG_MDC_PIN
+#define MDC(bit)		if(bit) iop->pdat |=  CONFIG_SYS_MDC_PIN; \
+				else	iop->pdat &= ~CONFIG_SYS_MDC_PIN
 
 #define MIIDELAY		udelay(1)
 
@@ -138,25 +138,25 @@
 /*-----------------------------------------------------------------------
  * Miscellaneous configurable options
  */
-#define CFG_PROMPT		"=> "		/* Monitor Command Prompt	*/
-#define CFG_HUSH_PARSER
-#define CFG_PROMPT_HUSH_PS2	"> "
-#define CFG_LONGHELP				/* #undef to save memory	*/
-#define CFG_CBSIZE		256		/* Console I/O Buffer Size	*/
-#define CFG_PBSIZE (CFG_CBSIZE + sizeof(CFG_PROMPT) + 16)  /* Print Buffer Size */
-#define CFG_MAXARGS		16		/* Max number of command args	*/
-#define CFG_BARGSIZE		CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+#define CONFIG_SYS_PROMPT		"=> "		/* Monitor Command Prompt	*/
+#define CONFIG_SYS_HUSH_PARSER
+#define CONFIG_SYS_PROMPT_HUSH_PS2	"> "
+#define CONFIG_SYS_LONGHELP				/* #undef to save memory	*/
+#define CONFIG_SYS_CBSIZE		256		/* Console I/O Buffer Size	*/
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)  /* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS		16		/* Max number of command args	*/
+#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
 
-#define CFG_MEMTEST_START	0x00100000	/* memtest works on		*/
-#define CFG_MEMTEST_END		0x03B00000	/* 1 ... 59 MB in SDRAM		*/
+#define CONFIG_SYS_MEMTEST_START	0x00100000	/* memtest works on		*/
+#define CONFIG_SYS_MEMTEST_END		0x03B00000	/* 1 ... 59 MB in SDRAM		*/
 
-#define CFG_LOAD_ADDR		0x100000	/* Default load address		*/
+#define CONFIG_SYS_LOAD_ADDR		0x100000	/* Default load address		*/
 
-#define CFG_HZ			1000		/* Decrementer freq: 1 ms ticks	*/
+#define CONFIG_SYS_HZ			1000		/* Decrementer freq: 1 ms ticks	*/
 
-#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
 
-#define CFG_RESET_ADDRESS	0x09900000
+#define CONFIG_SYS_RESET_ADDRESS	0x09900000
 
 #define CONFIG_MISC_INIT_R			/* We need misc_init_r()	*/
 
@@ -165,70 +165,70 @@
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
+#define CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
 
-#define CFG_MONITOR_BASE	TEXT_BASE
-#define CFG_MONITOR_LEN		(192 << 10)	/* Reserve 192 kB for Monitor   */
+#define CONFIG_SYS_MONITOR_BASE	TEXT_BASE
+#define CONFIG_SYS_MONITOR_LEN		(192 << 10)	/* Reserve 192 kB for Monitor   */
 #ifdef CONFIG_BZIP2
-#define CFG_MALLOC_LEN		(4096 << 10)	/* Reserve 4 MB for malloc()    */
+#define CONFIG_SYS_MALLOC_LEN		(4096 << 10)	/* Reserve 4 MB for malloc()    */
 #else
-#define CFG_MALLOC_LEN		(128 << 10)	/* Reserve 128 KB for malloc()  */
+#define CONFIG_SYS_MALLOC_LEN		(128 << 10)	/* Reserve 128 KB for malloc()  */
 #endif /* CONFIG_BZIP2 */
 
 /*-----------------------------------------------------------------------
  * FLASH organization
  */
-#define CFG_FLASH_BASE		0xFE000000
-#define CFG_FLASH_CFI				/* The flash is CFI compatible  */
+#define CONFIG_SYS_FLASH_BASE		0xFE000000
+#define CONFIG_SYS_FLASH_CFI				/* The flash is CFI compatible  */
 #define CONFIG_FLASH_CFI_DRIVER			/* Use common CFI driver        */
-#define CFG_MAX_FLASH_BANKS	1		/* Max num of memory banks	*/
-#define CFG_MAX_FLASH_SECT	142		/* Max num of sects on one chip */
+#define CONFIG_SYS_MAX_FLASH_BANKS	1		/* Max num of memory banks	*/
+#define CONFIG_SYS_MAX_FLASH_SECT	142		/* Max num of sects on one chip */
 
 /* Environment is in flash, there is little space left in Serial EEPROM */
-#define CFG_ENV_IS_IN_FLASH
-#define CFG_ENV_SECT_SIZE	0x10000		/* We use one complete sector	*/
-#define CFG_ENV_SIZE		(CFG_ENV_SECT_SIZE)
-#define CFG_ENV_ADDR		(CFG_MONITOR_BASE + CFG_MONITOR_LEN)
-#define CFG_ENV_ADDR_REDUND	(CFG_ENV_ADDR + CFG_ENV_SECT_SIZE)
-#define CFG_ENV_SIZE_REDUND	(CFG_ENV_SIZE)
+#define CONFIG_ENV_IS_IN_FLASH
+#define CONFIG_ENV_SECT_SIZE	0x10000		/* We use one complete sector	*/
+#define CONFIG_ENV_SIZE		(CONFIG_ENV_SECT_SIZE)
+#define CONFIG_ENV_ADDR		(CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)
+#define CONFIG_ENV_ADDR_REDUND	(CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE)
+#define CONFIG_ENV_SIZE_REDUND	(CONFIG_ENV_SIZE)
 
 /*-----------------------------------------------------------------------
  * Hard Reset Configuration Words
  *
- * If you change bits in the HRCW, you must also change the CFG_*
+ * If you change bits in the HRCW, you must also change the CONFIG_SYS_*
  * defines for the various registers affected by the HRCW e.g. changing
- * HRCW_DPPCxx requires you to also change CFG_SIUMCR.
+ * HRCW_DPPCxx requires you to also change CONFIG_SYS_SIUMCR.
  */
 /* 0x1686B245 */
-#define CFG_HRCW_MASTER (HRCW_EBM      | HRCW_BPS01       | HRCW_CIP    |\
+#define CONFIG_SYS_HRCW_MASTER (HRCW_EBM      | HRCW_BPS01       | HRCW_CIP    |\
 			 HRCW_L2CPC10  | HRCW_ISB110                    |\
 			 HRCW_BMS      | HRCW_MMR11       | HRCW_APPC10 |\
 			 HRCW_CS10PC01 | HRCW_MODCK_H0101                \
 			)
 /* No slaves */
-#define CFG_HRCW_SLAVE1 0
-#define CFG_HRCW_SLAVE2 0
-#define CFG_HRCW_SLAVE3 0
-#define CFG_HRCW_SLAVE4 0
-#define CFG_HRCW_SLAVE5 0
-#define CFG_HRCW_SLAVE6 0
-#define CFG_HRCW_SLAVE7 0
+#define CONFIG_SYS_HRCW_SLAVE1 0
+#define CONFIG_SYS_HRCW_SLAVE2 0
+#define CONFIG_SYS_HRCW_SLAVE3 0
+#define CONFIG_SYS_HRCW_SLAVE4 0
+#define CONFIG_SYS_HRCW_SLAVE5 0
+#define CONFIG_SYS_HRCW_SLAVE6 0
+#define CONFIG_SYS_HRCW_SLAVE7 0
 
 /*-----------------------------------------------------------------------
  * Internal Memory Mapped Register
  */
-#define CFG_IMMR		0xF0F00000
-#ifdef CFG_REV_B
-#define CFG_DEFAULT_IMMR	0xFF000000
-#endif /* CFG_REV_B */
+#define CONFIG_SYS_IMMR		0xF0F00000
+#ifdef CONFIG_SYS_REV_B
+#define CONFIG_SYS_DEFAULT_IMMR	0xFF000000
+#endif /* CONFIG_SYS_REV_B */
 /*-----------------------------------------------------------------------
  * Definitions for initial stack pointer and data area (in DPRAM)
  */
-#define CFG_INIT_RAM_ADDR	CFG_IMMR
-#define CFG_INIT_RAM_END	0x4000		/* End of used area in DPRAM	*/
-#define CFG_GBL_DATA_SIZE	128  /* Size in bytes reserved for initial data */
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_IMMR
+#define CONFIG_SYS_INIT_RAM_END	0x4000		/* End of used area in DPRAM	*/
+#define CONFIG_SYS_GBL_DATA_SIZE	128  /* Size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
 /*-----------------------------------------------------------------------
  * Internal Definitions
@@ -241,7 +241,7 @@
 /*-----------------------------------------------------------------------
  * Cache Configuration
  */
-#define CFG_CACHELINE_SIZE	32	/* For MPC8260 CPU			*/
+#define CONFIG_SYS_CACHELINE_SIZE	32	/* For MPC8260 CPU			*/
 
 /*-----------------------------------------------------------------------
  * HIDx - Hardware Implementation-dependent Registers		2-11
@@ -250,29 +250,29 @@
  *
  * HID1 has only read-only information - nothing to set.
  */
-#define CFG_HID0_INIT		(HID0_ICE|HID0_DCE|HID0_ICFI|HID0_DCI|\
+#define CONFIG_SYS_HID0_INIT		(HID0_ICE|HID0_DCE|HID0_ICFI|HID0_DCI|\
 				HID0_IFEM|HID0_ABE)
-#define CFG_HID0_FINAL		(HID0_ICE|HID0_IFEM|HID0_ABE)
-#define CFG_HID2		0
+#define CONFIG_SYS_HID0_FINAL		(HID0_ICE|HID0_IFEM|HID0_ABE)
+#define CONFIG_SYS_HID2		0
 
 /*-----------------------------------------------------------------------
  * RMR - Reset Mode Register					 5-5
  *-----------------------------------------------------------------------
  * turn on Checkstop Reset Enable
  */
-#define CFG_RMR			RMR_CSRE
+#define CONFIG_SYS_RMR			RMR_CSRE
 
 /*-----------------------------------------------------------------------
  * BCR - Bus Configuration					 4-25
  *-----------------------------------------------------------------------
  */
-#define CFG_BCR			0xA01C0000
+#define CONFIG_SYS_BCR			0xA01C0000
 
 /*-----------------------------------------------------------------------
  * SIUMCR - SIU Module Configuration				 4-31
  *-----------------------------------------------------------------------
  */
-#define CFG_SIUMCR		0x42250000/* 0x4205C000 */
+#define CONFIG_SYS_SIUMCR		0x42250000/* 0x4205C000 */
 
 /*-----------------------------------------------------------------------
  * SYPCR - System Protection Control				 4-35
@@ -281,10 +281,10 @@
  * Watchdog & Bus Monitor Timer max, 60x Bus Monitor enable
  */
 #if defined (CONFIG_WATCHDOG)
-#define CFG_SYPCR		(SYPCR_SWTC|SYPCR_BMT|SYPCR_PBME|SYPCR_LBME|\
+#define CONFIG_SYS_SYPCR		(SYPCR_SWTC|SYPCR_BMT|SYPCR_PBME|SYPCR_LBME|\
 				SYPCR_SWRI|SYPCR_SWP|SYPCR_SWE)
 #else
-#define CFG_SYPCR		(SYPCR_SWTC|SYPCR_BMT|SYPCR_PBME|SYPCR_LBME|\
+#define CONFIG_SYS_SYPCR		(SYPCR_SWTC|SYPCR_BMT|SYPCR_PBME|SYPCR_LBME|\
 				SYPCR_SWRI|SYPCR_SWP)
 #endif /* CONFIG_WATCHDOG */
 
@@ -294,7 +294,7 @@
  * and enable Time Counter
  *-----------------------------------------------------------------------
  */
-#define CFG_TMCNTSC		(TMCNTSC_SEC|TMCNTSC_ALR|TMCNTSC_TCF|TMCNTSC_TCE)
+#define CONFIG_SYS_TMCNTSC		(TMCNTSC_SEC|TMCNTSC_ALR|TMCNTSC_TCF|TMCNTSC_TCE)
 
 /*-----------------------------------------------------------------------
  * PISCR - Periodic Interrupt Status and Control		 4-42
@@ -302,20 +302,20 @@
  * Clear Periodic Interrupt Status, Set 32KHz timersclk, and enable
  * Periodic timer
  */
-#define CFG_PISCR		(PISCR_PS|PISCR_PTF|PISCR_PTE)
+#define CONFIG_SYS_PISCR		(PISCR_PS|PISCR_PTF|PISCR_PTE)
 
 /*-----------------------------------------------------------------------
  * SCCR - System Clock Control					 9-8
  *-----------------------------------------------------------------------
  * Ensure DFBRG is Divide by 16
  */
-#define CFG_SCCR		SCCR_DFBRG01
+#define CONFIG_SYS_SCCR		SCCR_DFBRG01
 
 /*-----------------------------------------------------------------------
  * RCCR - RISC Controller Configuration				13-7
  *-----------------------------------------------------------------------
  */
-#define CFG_RCCR		0
+#define CONFIG_SYS_RCCR		0
 
 /*-----------------------------------------------------------------------
  * Init Memory Controller:
@@ -326,31 +326,31 @@
  *  1	60x	SDRAM	64 bit                          SDRAM
  *  2	Local	SDRAM	32 bit	                        SDRAM
  */
-#define CFG_USE_FIRMWARE	/* If defined - do not initialise memory
+#define CONFIG_SYS_USE_FIRMWARE	/* If defined - do not initialise memory
 				   controller, rely on initialisation
 				   performed by the Interphase boot firmware.
 				 */
 
-#define CFG_OR0_PRELIM		0xFE000882
-#ifdef CFG_REV_B
-#define CFG_BR0_PRELIM		(CFG_FLASH_BASE | BRx_PS_8  | BRx_V)
+#define CONFIG_SYS_OR0_PRELIM		0xFE000882
+#ifdef CONFIG_SYS_REV_B
+#define CONFIG_SYS_BR0_PRELIM		(CONFIG_SYS_FLASH_BASE | BRx_PS_8  | BRx_V)
 #else  /* Rev. D */
-#define CFG_BR0_PRELIM		(CFG_FLASH_BASE | BRx_PS_16 | BRx_V)
-#endif /* CFG_REV_B */
+#define CONFIG_SYS_BR0_PRELIM		(CONFIG_SYS_FLASH_BASE | BRx_PS_16 | BRx_V)
+#endif /* CONFIG_SYS_REV_B */
 
-#define CFG_MPTPR		0x7F00
+#define CONFIG_SYS_MPTPR		0x7F00
 
 /* Please note that 60x SDRAM MUST start at 0 */
-#define CFG_SDRAM_BASE		0x00000000
-#define CFG_60x_BR		0x00000041
-#define CFG_60x_OR		0xF0002CD0
-#define CFG_PSDMR		0x0049929A
-#define CFG_PSRT		0x07
-
-#define CFG_LSDRAM_BASE		0xF7000000
-#define CFG_LOC_BR		0x00001861
-#define CFG_LOC_OR		0xFF803280
-#define CFG_LSDMR		0x8285A552
-#define CFG_LSRT		0x07
+#define CONFIG_SYS_SDRAM_BASE		0x00000000
+#define CONFIG_SYS_60x_BR		0x00000041
+#define CONFIG_SYS_60x_OR		0xF0002CD0
+#define CONFIG_SYS_PSDMR		0x0049929A
+#define CONFIG_SYS_PSRT		0x07
+
+#define CONFIG_SYS_LSDRAM_BASE		0xF7000000
+#define CONFIG_SYS_LOC_BR		0x00001861
+#define CONFIG_SYS_LOC_OR		0xFF803280
+#define CONFIG_SYS_LSDMR		0x8285A552
+#define CONFIG_SYS_LSRT		0x07
 
 #endif /* __CONFIG_H */
diff --git a/include/configs/IVML24.h b/include/configs/IVML24.h
index 0ffdfac07..cd100df05 100644
--- a/include/configs/IVML24.h
+++ b/include/configs/IVML24.h
@@ -66,7 +66,7 @@
 				"nfsaddrs=10.0.0.99:10.0.0.2"
 
 #define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
-#undef	CFG_LOADS_BAUD_CHANGE		/* don't allow baudrate change	*/
+#undef	CONFIG_SYS_LOADS_BAUD_CHANGE		/* don't allow baudrate change	*/
 
 #undef	CONFIG_WATCHDOG			/* watchdog disabled		*/
 
@@ -96,36 +96,36 @@
 /*
  * Miscellaneous configurable options
  */
-#define	CFG_LONGHELP			/* undef to save memory		*/
-#define	CFG_PROMPT	"=> "		/* Monitor Command Prompt	*/
+#define	CONFIG_SYS_LONGHELP			/* undef to save memory		*/
+#define	CONFIG_SYS_PROMPT	"=> "		/* Monitor Command Prompt	*/
 #if defined(CONFIG_CMD_KGDB)
-#define	CFG_CBSIZE	1024		/* Console I/O Buffer Size	*/
+#define	CONFIG_SYS_CBSIZE	1024		/* Console I/O Buffer Size	*/
 #else
-#define	CFG_CBSIZE	256		/* Console I/O Buffer Size	*/
+#define	CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size	*/
 #endif
-#define	CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define	CFG_MAXARGS	16		/* max number of command args	*/
-#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+#define	CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define	CONFIG_SYS_MAXARGS	16		/* max number of command args	*/
+#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
 
-#define CFG_MEMTEST_START	0x00100000	/* memtest works on	*/
-#define CFG_MEMTEST_END		0x00F00000	/* 1 ... 15MB in DRAM	*/
+#define CONFIG_SYS_MEMTEST_START	0x00100000	/* memtest works on	*/
+#define CONFIG_SYS_MEMTEST_END		0x00F00000	/* 1 ... 15MB in DRAM	*/
 
-#define	CFG_LOAD_ADDR		0x00100000	/* default load address	*/
+#define	CONFIG_SYS_LOAD_ADDR		0x00100000	/* default load address	*/
 
-#define	CFG_PIO_MODE		0	/* IDE interface in PIO Mode 0	*/
+#define	CONFIG_SYS_PIO_MODE		0	/* IDE interface in PIO Mode 0	*/
 
-#define CFG_PB_12V_ENABLE	0x00002000		/* PB 18	*/
-#define CFG_PB_ILOCK_SWITCH	0x00004000		/* PB 17	*/
-#define CFG_PB_SDRAM_CLKE	0x00008000		/* PB 16	*/
-#define CFG_PB_ETH_POWERDOWN	0x00010000		/* PB 15	*/
-#define CFG_PB_IDE_MOTOR	0x00020000		/* PB 14	*/
+#define CONFIG_SYS_PB_12V_ENABLE	0x00002000		/* PB 18	*/
+#define CONFIG_SYS_PB_ILOCK_SWITCH	0x00004000		/* PB 17	*/
+#define CONFIG_SYS_PB_SDRAM_CLKE	0x00008000		/* PB 16	*/
+#define CONFIG_SYS_PB_ETH_POWERDOWN	0x00010000		/* PB 15	*/
+#define CONFIG_SYS_PB_IDE_MOTOR	0x00020000		/* PB 14	*/
 
-#define CFG_PC_ETH_RESET	((ushort)0x0010)	/* PC 11	*/
-#define CFG_PC_IDE_RESET	((ushort)0x0020)	/* PC 10	*/
+#define CONFIG_SYS_PC_ETH_RESET	((ushort)0x0010)	/* PC 11	*/
+#define CONFIG_SYS_PC_IDE_RESET	((ushort)0x0020)	/* PC 10	*/
 
-#define	CFG_HZ		1000		/* decrementer freq: 1 ms ticks	*/
+#define	CONFIG_SYS_HZ		1000		/* decrementer freq: 1 ms ticks	*/
 
-#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
 
 /*
  * Low Level Configuration Settings
@@ -135,64 +135,64 @@
 /*-----------------------------------------------------------------------
  * Internal Memory Mapped Register
  */
-#define CFG_IMMR		0xFFF00000 /* was: 0xFF000000 */
+#define CONFIG_SYS_IMMR		0xFFF00000 /* was: 0xFF000000 */
 
 /*-----------------------------------------------------------------------
  * Definitions for initial stack pointer and data area (in DPRAM)
  */
-#define CFG_INIT_RAM_ADDR	CFG_IMMR
+#define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_IMMR
 
 #if defined (CONFIG_IVML24_16M)
-# define	CFG_INIT_RAM_END	0x2F00	/* End of used area in DPRAM	*/
+# define	CONFIG_SYS_INIT_RAM_END	0x2F00	/* End of used area in DPRAM	*/
 #elif defined (CONFIG_IVML24_32M)
-# define	CFG_INIT_RAM_END	0x3000	/* End of used area in DPRAM	*/
+# define	CONFIG_SYS_INIT_RAM_END	0x3000	/* End of used area in DPRAM	*/
 #elif defined (CONFIG_IVML24_64M)
-# define	CFG_INIT_RAM_END	0x3000	/* End of used area in DPRAM	*/
+# define	CONFIG_SYS_INIT_RAM_END	0x3000	/* End of used area in DPRAM	*/
 #endif
 
-#define	CFG_GBL_DATA_SIZE	64  /* size in bytes reserved for initial data */
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define	CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+#define	CONFIG_SYS_GBL_DATA_SIZE	64  /* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define	CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
 /*-----------------------------------------------------------------------
  * Start addresses for the final memory configuration
  * (Set up by the startup code)
- * Please note that CFG_SDRAM_BASE _must_ start at 0
+ * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
  */
-#define	CFG_SDRAM_BASE		0x00000000
-#define CFG_FLASH_BASE		0xFF000000
+#define	CONFIG_SYS_SDRAM_BASE		0x00000000
+#define CONFIG_SYS_FLASH_BASE		0xFF000000
 #ifdef	DEBUG
-#define	CFG_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor	*/
+#define	CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor	*/
 #else
-#define	CFG_MONITOR_LEN		(192 << 10)	/* Reserve 192 kB for Monitor	*/
+#define	CONFIG_SYS_MONITOR_LEN		(192 << 10)	/* Reserve 192 kB for Monitor	*/
 #endif
-#define CFG_MONITOR_BASE	CFG_FLASH_BASE
-#define	CFG_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/
+#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_FLASH_BASE
+#define	CONFIG_SYS_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/
 
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define	CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux	*/
+#define	CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux	*/
 /*-----------------------------------------------------------------------
  * FLASH organization
  */
-#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
-#define CFG_MAX_FLASH_SECT	256	/* max number of sectors on one chip	*/
+#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
+#define CONFIG_SYS_MAX_FLASH_SECT	256	/* max number of sectors on one chip	*/
 
-#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
-#define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
+#define CONFIG_SYS_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
+#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
 
-#define	CFG_ENV_IS_IN_FLASH	1
-#define	CFG_ENV_OFFSET		0x7A000	/*   Offset   of Environment Sector	*/
-#define	CFG_ENV_SIZE		0x2000	/* Total Size of Environment Sector	*/
+#define	CONFIG_ENV_IS_IN_FLASH	1
+#define	CONFIG_ENV_OFFSET		0x7A000	/*   Offset   of Environment Sector	*/
+#define	CONFIG_ENV_SIZE		0x2000	/* Total Size of Environment Sector	*/
 /*-----------------------------------------------------------------------
  * Cache Configuration
  */
-#define CFG_CACHELINE_SIZE	16	/* For all MPC8xx CPUs			*/
+#define CONFIG_SYS_CACHELINE_SIZE	16	/* For all MPC8xx CPUs			*/
 #if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT	4	/* log base 2 of the above value	*/
+#define CONFIG_SYS_CACHELINE_SHIFT	4	/* log base 2 of the above value	*/
 #endif
 
 /*-----------------------------------------------------------------------
@@ -204,18 +204,18 @@
 #if defined(CONFIG_WATCHDOG)
 
 # if defined (CONFIG_IVML24_16M)
-#  define CFG_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
+#  define CONFIG_SYS_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
 			 SYPCR_SWE  | SYPCR_SWRI| SYPCR_SWP)
 # elif defined (CONFIG_IVML24_32M)
-#  define CFG_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
+#  define CONFIG_SYS_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
 			 SYPCR_SWE  | SYPCR_SWP)
 # elif defined (CONFIG_IVML24_64M)
-#  define CFG_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
+#  define CONFIG_SYS_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
 			 SYPCR_SWE  | SYPCR_SWP)
 # endif
 
 #else
-#define CFG_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
+#define CONFIG_SYS_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
 #endif
 
 /*-----------------------------------------------------------------------
@@ -225,21 +225,21 @@
  */
 /* EARB, DBGC and DBPC are initialised by the HCW */
 /* => 0x000000C0 */
-#define CFG_SIUMCR	(SIUMCR_BSC | SIUMCR_GB5E)
+#define CONFIG_SYS_SIUMCR	(SIUMCR_BSC | SIUMCR_GB5E)
 
 /*-----------------------------------------------------------------------
  * TBSCR - Time Base Status and Control				11-26
  *-----------------------------------------------------------------------
  * Clear Reference Interrupt Status, Timebase freezing enabled
  */
-#define CFG_TBSCR	(TBSCR_REFA | TBSCR_REFB | TBSCR_TBF)
+#define CONFIG_SYS_TBSCR	(TBSCR_REFA | TBSCR_REFB | TBSCR_TBF)
 
 /*-----------------------------------------------------------------------
  * PISCR - Periodic Interrupt Status and Control		11-31
  *-----------------------------------------------------------------------
  * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
  */
-#define CFG_PISCR	(PISCR_PS | PISCR_PITF)
+#define CONFIG_SYS_PISCR	(PISCR_PS | PISCR_PITF)
 
 /*-----------------------------------------------------------------------
  * PLPRCR - PLL, Low-Power, and Reset Control Register		15-30
@@ -248,7 +248,7 @@
  * interrupt status bit, set PLL multiplication factor !
  */
 /* 0x00B0C0C0 */
-#define CFG_PLPRCR							\
+#define CONFIG_SYS_PLPRCR							\
 		(	(11 << PLPRCR_MF_SHIFT) |			\
 			PLPRCR_SPLSS | PLPRCR_TEXPS | /*PLPRCR_TMIST|*/	\
 			/*PLPRCR_CSRC|*/ PLPRCR_LPM_NORMAL |		\
@@ -263,7 +263,7 @@
  */
 #define SCCR_MASK	SCCR_EBDF11
 /* 0x01800014 */
-#define CFG_SCCR	(SCCR_COM01	| /*SCCR_TBS|*/		\
+#define CONFIG_SYS_SCCR	(SCCR_COM01	| /*SCCR_TBS|*/		\
 			 SCCR_RTDIV	|   SCCR_RTSEL	  |	\
 			 /*SCCR_CRQEN|*/  /*SCCR_PRQEN|*/	\
 			 SCCR_EBDF00	|   SCCR_DFSYNC00 |	\
@@ -276,7 +276,7 @@
  *-----------------------------------------------------------------------
  */
 /* 0x00C3 */
-#define CFG_RTCSC	(RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE)
+#define CONFIG_SYS_RTCSC	(RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE)
 
 
 /*-----------------------------------------------------------------------
@@ -284,34 +284,34 @@
  *-----------------------------------------------------------------------
  */
 /* TIMEP=2 */
-#define CFG_RCCR 0x0200
+#define CONFIG_SYS_RCCR 0x0200
 
 /*-----------------------------------------------------------------------
  * RMDS - RISC Microcode Development Support Control Register
  *-----------------------------------------------------------------------
  */
-#define CFG_RMDS 0
+#define CONFIG_SYS_RMDS 0
 
 /*-----------------------------------------------------------------------
  *
  * Interrupt Levels
  *-----------------------------------------------------------------------
  */
-#define CFG_CPM_INTERRUPT	13	/* SIU_LEVEL6	*/
+#define CONFIG_SYS_CPM_INTERRUPT	13	/* SIU_LEVEL6	*/
 
 /*-----------------------------------------------------------------------
  * PCMCIA stuff
  *-----------------------------------------------------------------------
  *
  */
-#define CFG_PCMCIA_MEM_ADDR	(0xE0000000)
-#define CFG_PCMCIA_MEM_SIZE	( 64 << 20 )
-#define CFG_PCMCIA_DMA_ADDR	(0xE4000000)
-#define CFG_PCMCIA_DMA_SIZE	( 64 << 20 )
-#define CFG_PCMCIA_ATTRB_ADDR	(0xE8000000)
-#define CFG_PCMCIA_ATTRB_SIZE	( 64 << 20 )
-#define CFG_PCMCIA_IO_ADDR	(0xEC000000)
-#define CFG_PCMCIA_IO_SIZE	( 64 << 20 )
+#define CONFIG_SYS_PCMCIA_MEM_ADDR	(0xE0000000)
+#define CONFIG_SYS_PCMCIA_MEM_SIZE	( 64 << 20 )
+#define CONFIG_SYS_PCMCIA_DMA_ADDR	(0xE4000000)
+#define CONFIG_SYS_PCMCIA_DMA_SIZE	( 64 << 20 )
+#define CONFIG_SYS_PCMCIA_ATTRB_ADDR	(0xE8000000)
+#define CONFIG_SYS_PCMCIA_ATTRB_SIZE	( 64 << 20 )
+#define CONFIG_SYS_PCMCIA_IO_ADDR	(0xEC000000)
+#define CONFIG_SYS_PCMCIA_IO_SIZE	( 64 << 20 )
 
 /*-----------------------------------------------------------------------
  * IDE/ATA stuff
@@ -320,23 +320,23 @@
 #define CONFIG_IDE_8xx_DIRECT	1	/* PCMCIA interface required	*/
 #define CONFIG_IDE_RESET	1	/* reset for ide supported	*/
 
-#define CFG_IDE_MAXBUS		1	/* The IVML24 has only 1 IDE bus*/
-#define CFG_IDE_MAXDEVICE	1	/*    ... and only 1 IDE device	*/
+#define CONFIG_SYS_IDE_MAXBUS		1	/* The IVML24 has only 1 IDE bus*/
+#define CONFIG_SYS_IDE_MAXDEVICE	1	/*    ... and only 1 IDE device	*/
 
-#define CFG_ATA_BASE_ADDR	0xFE100000
-#define CFG_ATA_IDE0_OFFSET	0x0000
-#undef	CFG_ATA_IDE1_OFFSET		/* only one IDE bus available	*/
+#define CONFIG_SYS_ATA_BASE_ADDR	0xFE100000
+#define CONFIG_SYS_ATA_IDE0_OFFSET	0x0000
+#undef	CONFIG_SYS_ATA_IDE1_OFFSET		/* only one IDE bus available	*/
 
-#define CFG_ATA_DATA_OFFSET	0x0000	/* Offset for data I/O			*/
-#define CFG_ATA_REG_OFFSET	0x0080	/* Offset for normal register accesses	*/
-#define CFG_ATA_ALT_OFFSET	0x0100	/* Offset for alternate registers	*/
+#define CONFIG_SYS_ATA_DATA_OFFSET	0x0000	/* Offset for data I/O			*/
+#define CONFIG_SYS_ATA_REG_OFFSET	0x0080	/* Offset for normal register accesses	*/
+#define CONFIG_SYS_ATA_ALT_OFFSET	0x0100	/* Offset for alternate registers	*/
 
 /*-----------------------------------------------------------------------
  *
  *-----------------------------------------------------------------------
  *
  */
-#define CFG_DER	0
+#define CONFIG_SYS_DER	0
 
 /*
  * Init Memory Controller:
@@ -351,18 +351,18 @@
  * but not too much to meddle with FLASH accesses
  */
 /* EPROMs are 512kb */
-#define CFG_REMAP_OR_AM		0xFFF80000	/* OR addr mask */
-#define CFG_PRELIM_OR_AM	0xFFF80000	/* OR addr mask */
+#define CONFIG_SYS_REMAP_OR_AM		0xFFF80000	/* OR addr mask */
+#define CONFIG_SYS_PRELIM_OR_AM	0xFFF80000	/* OR addr mask */
 
 /* FLASH timing: ACS = 11, TRLX = 0, CSNT = 1, SCY = 5, EHTR = 1	*/
-#define CFG_OR_TIMING_FLASH	(OR_SCY_5_CLK | OR_EHTR)
+#define CONFIG_SYS_OR_TIMING_FLASH	(OR_SCY_5_CLK | OR_EHTR)
 
-#define CFG_OR0_REMAP	( CFG_REMAP_OR_AM | OR_ACS_DIV4 | OR_BI | \
-				CFG_OR_TIMING_FLASH)
-#define CFG_OR0_PRELIM	(CFG_PRELIM_OR_AM | OR_ACS_DIV4 | OR_BI | \
-				CFG_OR_TIMING_FLASH)
+#define CONFIG_SYS_OR0_REMAP	( CONFIG_SYS_REMAP_OR_AM | OR_ACS_DIV4 | OR_BI | \
+				CONFIG_SYS_OR_TIMING_FLASH)
+#define CONFIG_SYS_OR0_PRELIM	(CONFIG_SYS_PRELIM_OR_AM | OR_ACS_DIV4 | OR_BI | \
+				CONFIG_SYS_OR_TIMING_FLASH)
 /* 16 bit, bank valid */
-#define CFG_BR0_PRELIM	((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_PS_16 | BR_V )
+#define CONFIG_SYS_BR0_PRELIM	((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_PS_16 | BR_V )
 
 /*
  * BR1/OR1 - ELIC SACCO bank  @ 0xFE000000
@@ -373,9 +373,9 @@
 #define ELIC_SACCO_OR_AM	0xFFFF8000
 #define ELIC_SACCO_TIMING	(OR_SCY_2_CLK | OR_TRLX | OR_EHTR)
 
-#define CFG_OR1	(ELIC_SACCO_OR_AM | OR_CSNT_SAM | OR_ACS_DIV2 | OR_BI | \
+#define CONFIG_SYS_OR1	(ELIC_SACCO_OR_AM | OR_CSNT_SAM | OR_ACS_DIV2 | OR_BI | \
 			ELIC_SACCO_TIMING)
-#define CFG_BR1	((ELIC_SACCO_BASE & BR_BA_MSK) | BR_PS_8 | BR_V )
+#define CONFIG_SYS_BR1	((ELIC_SACCO_BASE & BR_BA_MSK) | BR_PS_8 | BR_V )
 
 /*
  * BR2/OR2 - ELIC EPIC bank   @ 0xFE008000
@@ -386,9 +386,9 @@
 #define ELIC_EPIC_OR_AM		0xFFFF8000
 #define ELIC_EPIC_TIMING	(OR_SCY_2_CLK | OR_TRLX | OR_EHTR)
 
-#define CFG_OR2 (ELIC_EPIC_OR_AM | OR_CSNT_SAM | OR_ACS_DIV2 | OR_BI | \
+#define CONFIG_SYS_OR2 (ELIC_EPIC_OR_AM | OR_CSNT_SAM | OR_ACS_DIV2 | OR_BI | \
 			ELIC_EPIC_TIMING)
-#define CFG_BR2	((ELIC_EPIC_BASE & BR_BA_MSK) | BR_PS_8 | BR_V )
+#define CONFIG_SYS_BR2	((ELIC_EPIC_BASE & BR_BA_MSK) | BR_PS_8 | BR_V )
 
 /*
  * BR3/OR3: SDRAM
@@ -401,8 +401,8 @@
 
 #define SDRAM_MAX_SIZE		0x04000000	/* max 64 MB SDRAM */
 
-#define CFG_OR3_PRELIM	(SDRAM_PRELIM_OR_AM | OR_CSNT_SAM | OR_G5LS | SDRAM_TIMING )
-#define CFG_BR3_PRELIM	((SDRAM_BASE3_PRELIM & BR_BA_MSK) | BR_MS_UPMB | BR_V )
+#define CONFIG_SYS_OR3_PRELIM	(SDRAM_PRELIM_OR_AM | OR_CSNT_SAM | OR_G5LS | SDRAM_TIMING )
+#define CONFIG_SYS_BR3_PRELIM	((SDRAM_BASE3_PRELIM & BR_BA_MSK) | BR_MS_UPMB | BR_V )
 
 /*
  * BR4/OR4 - HDLC Address
@@ -413,8 +413,8 @@
 #define HDLC_ADDR_OR_AM		0xFFFF8000
 #define HDLC_ADDR_TIMING	OR_SCY_1_CLK
 
-#define CFG_OR4	(HDLC_ADDR_OR_AM | OR_BI | HDLC_ADDR_TIMING)
-#define CFG_BR4	((HDLC_ADDR_BASE & BR_BA_MSK) | BR_PS_8 | BR_WP | BR_V )
+#define CONFIG_SYS_OR4	(HDLC_ADDR_OR_AM | OR_BI | HDLC_ADDR_TIMING)
+#define CONFIG_SYS_BR4	((HDLC_ADDR_BASE & BR_BA_MSK) | BR_PS_8 | BR_WP | BR_V )
 
 /*
  * BR5/OR5: SHARC ADSP-2165L
@@ -425,29 +425,29 @@
 #define SHARC_OR_AM		0xFFC00000
 #define SHARC_TIMING		OR_SCY_0_CLK
 
-#define CFG_OR5	(SHARC_OR_AM | OR_ACS_DIV2 | OR_BI | SHARC_TIMING )
-#define CFG_BR5	((SHARC_BASE & BR_BA_MSK) | BR_PS_32 | BR_MS_UPMA | BR_V )
+#define CONFIG_SYS_OR5	(SHARC_OR_AM | OR_ACS_DIV2 | OR_BI | SHARC_TIMING )
+#define CONFIG_SYS_BR5	((SHARC_BASE & BR_BA_MSK) | BR_PS_32 | BR_MS_UPMA | BR_V )
 
 /*
  * Memory Periodic Timer Prescaler
  */
 
 /* periodic timer for refresh */
-#define CFG_MBMR_PTB	204
+#define CONFIG_SYS_MBMR_PTB	204
 
 /* refresh rate 15.6 us (= 64 ms / 4K = 62.4 / quad bursts) for <= 128 MBit	*/
-#define CFG_MPTPR_2BK_4K	MPTPR_PTP_DIV16		/* setting for 2 banks	*/
-#define CFG_MPTPR_1BK_4K	MPTPR_PTP_DIV32		/* setting for 1 bank	*/
+#define CONFIG_SYS_MPTPR_2BK_4K	MPTPR_PTP_DIV16		/* setting for 2 banks	*/
+#define CONFIG_SYS_MPTPR_1BK_4K	MPTPR_PTP_DIV32		/* setting for 1 bank	*/
 
 /* refresh rate 7.8 us (= 64 ms / 8K = 31.2 / quad bursts) for 256 MBit		*/
-#define CFG_MPTPR_2BK_8K	MPTPR_PTP_DIV8		/* setting for 2 banks	*/
+#define CONFIG_SYS_MPTPR_2BK_8K	MPTPR_PTP_DIV8		/* setting for 2 banks	*/
 
 #if defined (CONFIG_IVML24_16M)
-# define CFG_MPTPR_1BK_8K	MPTPR_PTP_DIV16		/* setting for 1 bank	*/
+# define CONFIG_SYS_MPTPR_1BK_8K	MPTPR_PTP_DIV16		/* setting for 1 bank	*/
 #elif defined (CONFIG_IVML24_32M)
-# define CFG_MPTPR_1BK_8K	MPTPR_PTP_DIV16		/* setting for 1 bank	*/
+# define CONFIG_SYS_MPTPR_1BK_8K	MPTPR_PTP_DIV16		/* setting for 1 bank	*/
 #elif defined (CONFIG_IVML24_64M)
-# define CFG_MPTPR_1BK_8K	MPTPR_PTP_DIV8		/* setting for 1 bank	*/
+# define CONFIG_SYS_MPTPR_1BK_8K	MPTPR_PTP_DIV8		/* setting for 1 bank	*/
 #endif
 
 
@@ -457,17 +457,17 @@
 
 #if defined (CONFIG_IVML24_16M)
  /* 8 column SDRAM */
-# define CFG_MBMR_8COL	((CFG_MBMR_PTB << MBMR_PTB_SHIFT)  | \
+# define CONFIG_SYS_MBMR_8COL	((CONFIG_SYS_MBMR_PTB << MBMR_PTB_SHIFT)  | \
 			 MBMR_AMB_TYPE_0 | MBMR_DSB_1_CYCL | MBMR_G0CLB_A11 |	\
 			 MBMR_RLFB_1X	 | MBMR_WLFB_1X	   | MBMR_TLFB_4X)
 #elif defined (CONFIG_IVML24_32M)
 /* 128 MBit SDRAM */
-# define CFG_MBMR_8COL	((CFG_MBMR_PTB << MBMR_PTB_SHIFT)  | \
+# define CONFIG_SYS_MBMR_8COL	((CONFIG_SYS_MBMR_PTB << MBMR_PTB_SHIFT)  | \
 			 MBMR_AMB_TYPE_1 | MBMR_DSB_1_CYCL | MBMR_G0CLB_A10 |	\
 			 MBMR_RLFB_1X	 | MBMR_WLFB_1X	   | MBMR_TLFB_4X)
 #elif defined (CONFIG_IVML24_64M)
 /* 128 MBit SDRAM */
-# define CFG_MBMR_8COL	((CFG_MBMR_PTB << MBMR_PTB_SHIFT)  | \
+# define CONFIG_SYS_MBMR_8COL	((CONFIG_SYS_MBMR_PTB << MBMR_PTB_SHIFT)  | \
 			 MBMR_AMB_TYPE_1 | MBMR_DSB_1_CYCL | MBMR_G0CLB_A10 |	\
 			 MBMR_RLFB_1X	 | MBMR_WLFB_1X	   | MBMR_TLFB_4X)
 #endif
diff --git a/include/configs/IVMS8.h b/include/configs/IVMS8.h
index ea3ffe0a1..125cb4b20 100644
--- a/include/configs/IVMS8.h
+++ b/include/configs/IVMS8.h
@@ -66,7 +66,7 @@
 				"nfsaddrs=10.0.0.99:10.0.0.2"
 
 #define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
-#undef	CFG_LOADS_BAUD_CHANGE		/* don't allow baudrate change	*/
+#undef	CONFIG_SYS_LOADS_BAUD_CHANGE		/* don't allow baudrate change	*/
 
 #undef	CONFIG_WATCHDOG			/* watchdog disabled		*/
 
@@ -95,34 +95,34 @@
 /*
  * Miscellaneous configurable options
  */
-#define	CFG_LONGHELP			/* undef to save memory		*/
-#define	CFG_PROMPT	"=> "		/* Monitor Command Prompt	*/
+#define	CONFIG_SYS_LONGHELP			/* undef to save memory		*/
+#define	CONFIG_SYS_PROMPT	"=> "		/* Monitor Command Prompt	*/
 #if defined(CONFIG_CMD_KGDB)
-#define	CFG_CBSIZE	1024		/* Console I/O Buffer Size	*/
+#define	CONFIG_SYS_CBSIZE	1024		/* Console I/O Buffer Size	*/
 #else
-#define	CFG_CBSIZE	256		/* Console I/O Buffer Size	*/
+#define	CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size	*/
 #endif
-#define	CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define	CFG_MAXARGS	16		/* max number of command args	*/
-#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+#define	CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define	CONFIG_SYS_MAXARGS	16		/* max number of command args	*/
+#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
 
-#define CFG_MEMTEST_START	0x00100000	/* memtest works on	*/
-#define CFG_MEMTEST_END		0x00F00000	/* 1 ... 15MB in DRAM	*/
+#define CONFIG_SYS_MEMTEST_START	0x00100000	/* memtest works on	*/
+#define CONFIG_SYS_MEMTEST_END		0x00F00000	/* 1 ... 15MB in DRAM	*/
 
-#define	CFG_LOAD_ADDR		0x00100000	/* default load address	*/
+#define	CONFIG_SYS_LOAD_ADDR		0x00100000	/* default load address	*/
 
-#define	CFG_PIO_MODE		0	/* IDE interface in PIO Mode 0	*/
+#define	CONFIG_SYS_PIO_MODE		0	/* IDE interface in PIO Mode 0	*/
 
-#define CFG_PB_SDRAM_CLKE	0x00008000		/* PB 16	*/
-#define CFG_PB_ETH_POWERDOWN	0x00010000		/* PB 15	*/
-#define CFG_PB_IDE_MOTOR	0x00020000		/* PB 14	*/
+#define CONFIG_SYS_PB_SDRAM_CLKE	0x00008000		/* PB 16	*/
+#define CONFIG_SYS_PB_ETH_POWERDOWN	0x00010000		/* PB 15	*/
+#define CONFIG_SYS_PB_IDE_MOTOR	0x00020000		/* PB 14	*/
 
-#define CFG_PC_ETH_RESET	((ushort)0x0010)	/* PC 11	*/
-#define CFG_PC_IDE_RESET	((ushort)0x0020)	/* PC 10	*/
+#define CONFIG_SYS_PC_ETH_RESET	((ushort)0x0010)	/* PC 11	*/
+#define CONFIG_SYS_PC_IDE_RESET	((ushort)0x0020)	/* PC 10	*/
 
-#define	CFG_HZ		1000		/* decrementer freq: 1 ms ticks	*/
+#define	CONFIG_SYS_HZ		1000		/* decrementer freq: 1 ms ticks	*/
 
-#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
 
 /*
  * Low Level Configuration Settings
@@ -132,63 +132,63 @@
 /*-----------------------------------------------------------------------
  * Internal Memory Mapped Register
  */
-#define CFG_IMMR		0xFFF00000 /* was: 0xFF000000 */
+#define CONFIG_SYS_IMMR		0xFFF00000 /* was: 0xFF000000 */
 
 /*-----------------------------------------------------------------------
  * Definitions for initial stack pointer and data area (in DPRAM)
  */
-#define CFG_INIT_RAM_ADDR	CFG_IMMR
+#define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_IMMR
 #if defined (CONFIG_IVMS8_16M)
-# define	CFG_INIT_RAM_END	0x2F00	/* End of used area in DPRAM	*/
+# define	CONFIG_SYS_INIT_RAM_END	0x2F00	/* End of used area in DPRAM	*/
 #elif defined (CONFIG_IVMS8_32M)
-# define	CFG_INIT_RAM_END	0x3000	/* End of used area in DPRAM	*/
+# define	CONFIG_SYS_INIT_RAM_END	0x3000	/* End of used area in DPRAM	*/
 #elif defined (CONFIG_IVMS8_64M)
-# define	CFG_INIT_RAM_END	0x3000	/* End of used area in DPRAM	*/
+# define	CONFIG_SYS_INIT_RAM_END	0x3000	/* End of used area in DPRAM	*/
 #endif
 
-#define	CFG_GBL_DATA_SIZE	64  /* size in bytes reserved for initial data */
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define	CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+#define	CONFIG_SYS_GBL_DATA_SIZE	64  /* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define	CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
 /*-----------------------------------------------------------------------
  * Start addresses for the final memory configuration
  * (Set up by the startup code)
- * Please note that CFG_SDRAM_BASE _must_ start at 0
+ * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
  */
-#define	CFG_SDRAM_BASE		0x00000000
-#define CFG_FLASH_BASE		0xFF000000
+#define	CONFIG_SYS_SDRAM_BASE		0x00000000
+#define CONFIG_SYS_FLASH_BASE		0xFF000000
 #ifdef	DEBUG
-#define	CFG_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor	*/
+#define	CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor	*/
 #else
-#define	CFG_MONITOR_LEN		(192 << 10)	/* Reserve 192 kB for Monitor	*/
+#define	CONFIG_SYS_MONITOR_LEN		(192 << 10)	/* Reserve 192 kB for Monitor	*/
 #endif
-#define CFG_MONITOR_BASE	CFG_FLASH_BASE
-#define	CFG_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/
+#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_FLASH_BASE
+#define	CONFIG_SYS_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/
 
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define	CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux	*/
+#define	CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux	*/
 /*-----------------------------------------------------------------------
  * FLASH organization
  */
-#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
-#define CFG_MAX_FLASH_SECT	256	/* max number of sectors on one chip	*/
+#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
+#define CONFIG_SYS_MAX_FLASH_SECT	256	/* max number of sectors on one chip	*/
 
-#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
-#define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
+#define CONFIG_SYS_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
+#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
 
-#define	CFG_ENV_IS_IN_FLASH	1
-#define	CFG_ENV_OFFSET		0x7A000	/*   Offset   of Environment Sector	*/
-#define	CFG_ENV_SIZE		0x2000	/* Total Size of Environment Sector	*/
+#define	CONFIG_ENV_IS_IN_FLASH	1
+#define	CONFIG_ENV_OFFSET		0x7A000	/*   Offset   of Environment Sector	*/
+#define	CONFIG_ENV_SIZE		0x2000	/* Total Size of Environment Sector	*/
 /*-----------------------------------------------------------------------
  * Cache Configuration
  */
-#define CFG_CACHELINE_SIZE	16	/* For all MPC8xx CPUs			*/
+#define CONFIG_SYS_CACHELINE_SIZE	16	/* For all MPC8xx CPUs			*/
 #if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT	4	/* log base 2 of the above value	*/
+#define CONFIG_SYS_CACHELINE_SHIFT	4	/* log base 2 of the above value	*/
 #endif
 
 /*-----------------------------------------------------------------------
@@ -199,17 +199,17 @@
  */
 #if defined(CONFIG_WATCHDOG)
 # if defined (CONFIG_IVMS8_16M)
-#   define CFG_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
+#   define CONFIG_SYS_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
 			 SYPCR_SWE  | SYPCR_SWRI| SYPCR_SWP)
 #  elif defined (CONFIG_IVMS8_32M)
-#   define CFG_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
+#   define CONFIG_SYS_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
 			 SYPCR_SWE  | SYPCR_SWP)
 #  elif defined (CONFIG_IVMS8_64M)
-#   define CFG_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
+#   define CONFIG_SYS_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
 			 SYPCR_SWE  | SYPCR_SWP)
 #  endif
 #else
-# define CFG_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
+# define CONFIG_SYS_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
 #endif
 
 /*-----------------------------------------------------------------------
@@ -219,21 +219,21 @@
  */
 /* EARB, DBGC and DBPC are initialised by the HCW */
 /* => 0x000000C0 */
-#define CFG_SIUMCR	(SIUMCR_BSC | SIUMCR_GB5E)
+#define CONFIG_SYS_SIUMCR	(SIUMCR_BSC | SIUMCR_GB5E)
 
 /*-----------------------------------------------------------------------
  * TBSCR - Time Base Status and Control				11-26
  *-----------------------------------------------------------------------
  * Clear Reference Interrupt Status, Timebase freezing enabled
  */
-#define CFG_TBSCR	(TBSCR_REFA | TBSCR_REFB | TBSCR_TBF)
+#define CONFIG_SYS_TBSCR	(TBSCR_REFA | TBSCR_REFB | TBSCR_TBF)
 
 /*-----------------------------------------------------------------------
  * PISCR - Periodic Interrupt Status and Control		11-31
  *-----------------------------------------------------------------------
  * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
  */
-#define CFG_PISCR	(PISCR_PS | PISCR_PITF)
+#define CONFIG_SYS_PISCR	(PISCR_PS | PISCR_PITF)
 
 /*-----------------------------------------------------------------------
  * PLPRCR - PLL, Low-Power, and Reset Control Register		15-30
@@ -242,7 +242,7 @@
  * interrupt status bit, set PLL multiplication factor !
  */
 /* 0x00B0C0C0 */
-#define CFG_PLPRCR							\
+#define CONFIG_SYS_PLPRCR							\
 		(	(11 << PLPRCR_MF_SHIFT) |			\
 			PLPRCR_SPLSS | PLPRCR_TEXPS | /*PLPRCR_TMIST|*/	\
 			/*PLPRCR_CSRC|*/ PLPRCR_LPM_NORMAL |		\
@@ -257,7 +257,7 @@
  */
 #define SCCR_MASK	SCCR_EBDF11
 /* 0x01800014 */
-#define CFG_SCCR	(SCCR_COM01	| /*SCCR_TBS|*/		\
+#define CONFIG_SYS_SCCR	(SCCR_COM01	| /*SCCR_TBS|*/		\
 			 SCCR_RTDIV	|   SCCR_RTSEL	  |	\
 			 /*SCCR_CRQEN|*/  /*SCCR_PRQEN|*/	\
 			 SCCR_EBDF00	|   SCCR_DFSYNC00 |	\
@@ -270,7 +270,7 @@
  *-----------------------------------------------------------------------
  */
 /* 0x00C3 */
-#define CFG_RTCSC	(RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE)
+#define CONFIG_SYS_RTCSC	(RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE)
 
 
 /*-----------------------------------------------------------------------
@@ -278,34 +278,34 @@
  *-----------------------------------------------------------------------
  */
 /* TIMEP=2 */
-#define CFG_RCCR 0x0200
+#define CONFIG_SYS_RCCR 0x0200
 
 /*-----------------------------------------------------------------------
  * RMDS - RISC Microcode Development Support Control Register
  *-----------------------------------------------------------------------
  */
-#define CFG_RMDS 0
+#define CONFIG_SYS_RMDS 0
 
 /*-----------------------------------------------------------------------
  *
  * Interrupt Levels
  *-----------------------------------------------------------------------
  */
-#define CFG_CPM_INTERRUPT	13	/* SIU_LEVEL6	*/
+#define CONFIG_SYS_CPM_INTERRUPT	13	/* SIU_LEVEL6	*/
 
 /*-----------------------------------------------------------------------
  * PCMCIA stuff
  *-----------------------------------------------------------------------
  *
  */
-#define CFG_PCMCIA_MEM_ADDR	(0xE0000000)
-#define CFG_PCMCIA_MEM_SIZE	( 64 << 20 )
-#define CFG_PCMCIA_DMA_ADDR	(0xE4000000)
-#define CFG_PCMCIA_DMA_SIZE	( 64 << 20 )
-#define CFG_PCMCIA_ATTRB_ADDR	(0xE8000000)
-#define CFG_PCMCIA_ATTRB_SIZE	( 64 << 20 )
-#define CFG_PCMCIA_IO_ADDR	(0xEC000000)
-#define CFG_PCMCIA_IO_SIZE	( 64 << 20 )
+#define CONFIG_SYS_PCMCIA_MEM_ADDR	(0xE0000000)
+#define CONFIG_SYS_PCMCIA_MEM_SIZE	( 64 << 20 )
+#define CONFIG_SYS_PCMCIA_DMA_ADDR	(0xE4000000)
+#define CONFIG_SYS_PCMCIA_DMA_SIZE	( 64 << 20 )
+#define CONFIG_SYS_PCMCIA_ATTRB_ADDR	(0xE8000000)
+#define CONFIG_SYS_PCMCIA_ATTRB_SIZE	( 64 << 20 )
+#define CONFIG_SYS_PCMCIA_IO_ADDR	(0xEC000000)
+#define CONFIG_SYS_PCMCIA_IO_SIZE	( 64 << 20 )
 
 /*-----------------------------------------------------------------------
  * IDE/ATA stuff
@@ -314,23 +314,23 @@
 #define CONFIG_IDE_8xx_DIRECT	1	/* PCMCIA interface required	*/
 #define CONFIG_IDE_RESET	1	/* reset for ide supported	*/
 
-#define CFG_IDE_MAXBUS		1	/* The IVMS8 has only 1 IDE bus	*/
-#define CFG_IDE_MAXDEVICE	1	/*    ... and only 1 IDE device	*/
+#define CONFIG_SYS_IDE_MAXBUS		1	/* The IVMS8 has only 1 IDE bus	*/
+#define CONFIG_SYS_IDE_MAXDEVICE	1	/*    ... and only 1 IDE device	*/
 
-#define CFG_ATA_BASE_ADDR	0xFE100000
-#define CFG_ATA_IDE0_OFFSET	0x0000
-#undef	CFG_ATA_IDE1_OFFSET		/* only one IDE bus available	*/
+#define CONFIG_SYS_ATA_BASE_ADDR	0xFE100000
+#define CONFIG_SYS_ATA_IDE0_OFFSET	0x0000
+#undef	CONFIG_SYS_ATA_IDE1_OFFSET		/* only one IDE bus available	*/
 
-#define CFG_ATA_DATA_OFFSET	0x0000	/* Offset for data I/O			*/
-#define CFG_ATA_REG_OFFSET	0x0080	/* Offset for normal register accesses	*/
-#define CFG_ATA_ALT_OFFSET	0x0100	/* Offset for alternate registers	*/
+#define CONFIG_SYS_ATA_DATA_OFFSET	0x0000	/* Offset for data I/O			*/
+#define CONFIG_SYS_ATA_REG_OFFSET	0x0080	/* Offset for normal register accesses	*/
+#define CONFIG_SYS_ATA_ALT_OFFSET	0x0100	/* Offset for alternate registers	*/
 
 /*-----------------------------------------------------------------------
  *
  *-----------------------------------------------------------------------
  *
  */
-#define CFG_DER	0
+#define CONFIG_SYS_DER	0
 
 /*
  * Init Memory Controller:
@@ -345,17 +345,17 @@
  * but not too much to meddle with FLASH accesses
  */
 /* EPROMs are 512kb */
-#define CFG_REMAP_OR_AM		0xFFF80000	/* OR addr mask */
-#define CFG_PRELIM_OR_AM	0xFFF80000	/* OR addr mask */
+#define CONFIG_SYS_REMAP_OR_AM		0xFFF80000	/* OR addr mask */
+#define CONFIG_SYS_PRELIM_OR_AM	0xFFF80000	/* OR addr mask */
 
 /* FLASH timing: ACS = 11, TRLX = 0, CSNT = 1, SCY = 5, EHTR = 1	*/
-#define CFG_OR_TIMING_FLASH	(/* OR_CSNT_SAM | */ OR_ACS_DIV4 | OR_BI | \
+#define CONFIG_SYS_OR_TIMING_FLASH	(/* OR_CSNT_SAM | */ OR_ACS_DIV4 | OR_BI | \
 				 OR_SCY_5_CLK | OR_EHTR)
 
-#define CFG_OR0_REMAP	(CFG_REMAP_OR_AM  | CFG_OR_TIMING_FLASH)
-#define CFG_OR0_PRELIM	(CFG_PRELIM_OR_AM | CFG_OR_TIMING_FLASH)
+#define CONFIG_SYS_OR0_REMAP	(CONFIG_SYS_REMAP_OR_AM  | CONFIG_SYS_OR_TIMING_FLASH)
+#define CONFIG_SYS_OR0_PRELIM	(CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_FLASH)
 /* 16 bit, bank valid */
-#define CFG_BR0_PRELIM	((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_PS_16 | BR_V )
+#define CONFIG_SYS_BR0_PRELIM	((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_PS_16 | BR_V )
 
 /*
  * BR1/OR1 - ELIC SACCO bank  @ 0xFE000000
@@ -366,8 +366,8 @@
 #define ELIC_SACCO_OR_AM	0xFFFF8000
 #define ELIC_SACCO_TIMING	0x00000F26
 
-#define CFG_OR1	(ELIC_SACCO_OR_AM | ELIC_SACCO_TIMING)
-#define CFG_BR1	((ELIC_SACCO_BASE & BR_BA_MSK) | BR_PS_8 | BR_V )
+#define CONFIG_SYS_OR1	(ELIC_SACCO_OR_AM | ELIC_SACCO_TIMING)
+#define CONFIG_SYS_BR1	((ELIC_SACCO_BASE & BR_BA_MSK) | BR_PS_8 | BR_V )
 
 /*
  * BR2/OR2 - ELIC EPIC bank   @ 0xFE008000
@@ -378,8 +378,8 @@
 #define ELIC_EPIC_OR_AM		0xFFFF8000
 #define ELIC_EPIC_TIMING	0x00000F26
 
-#define CFG_OR2 (ELIC_EPIC_OR_AM | ELIC_EPIC_TIMING)
-#define CFG_BR2	((ELIC_EPIC_BASE & BR_BA_MSK) | BR_PS_8 | BR_V )
+#define CONFIG_SYS_OR2 (ELIC_EPIC_OR_AM | ELIC_EPIC_TIMING)
+#define CONFIG_SYS_BR2	((ELIC_EPIC_BASE & BR_BA_MSK) | BR_PS_8 | BR_V )
 
 /*
  * BR3/OR3: SDRAM
@@ -392,8 +392,8 @@
 
 #define SDRAM_MAX_SIZE		0x04000000	/* max 64 MB SDRAM */
 
-#define CFG_OR3_PRELIM	(SDRAM_PRELIM_OR_AM | SDRAM_TIMING )
-#define CFG_BR3_PRELIM	((SDRAM_BASE3_PRELIM & BR_BA_MSK) | BR_MS_UPMB | BR_V )
+#define CONFIG_SYS_OR3_PRELIM	(SDRAM_PRELIM_OR_AM | SDRAM_TIMING )
+#define CONFIG_SYS_BR3_PRELIM	((SDRAM_BASE3_PRELIM & BR_BA_MSK) | BR_MS_UPMB | BR_V )
 
 /*
  * BR4/OR4: not used
@@ -408,28 +408,28 @@
 #define SHARC_OR_AM		0xFFC00000
 #define SHARC_TIMING		0x00000700
 
-#define CFG_OR5	(SHARC_OR_AM | SHARC_TIMING )
-#define CFG_BR5	((SHARC_BASE & BR_BA_MSK) | BR_PS_32 | BR_MS_UPMA | BR_V )
+#define CONFIG_SYS_OR5	(SHARC_OR_AM | SHARC_TIMING )
+#define CONFIG_SYS_BR5	((SHARC_BASE & BR_BA_MSK) | BR_PS_32 | BR_MS_UPMA | BR_V )
 
 /*
  * Memory Periodic Timer Prescaler
  */
 
 /* periodic timer for refresh */
-#define CFG_MBMR_PTB	204
+#define CONFIG_SYS_MBMR_PTB	204
 
 /* refresh rate 15.6 us (= 64 ms / 4K = 62.4 / quad bursts) for <= 128 MBit	*/
-#define CFG_MPTPR_2BK_4K	MPTPR_PTP_DIV16		/* setting for 2 banks	*/
-#define CFG_MPTPR_1BK_4K	MPTPR_PTP_DIV32		/* setting for 1 bank	*/
+#define CONFIG_SYS_MPTPR_2BK_4K	MPTPR_PTP_DIV16		/* setting for 2 banks	*/
+#define CONFIG_SYS_MPTPR_1BK_4K	MPTPR_PTP_DIV32		/* setting for 1 bank	*/
 
 /* refresh rate 7.8 us (= 64 ms / 8K = 31.2 / quad bursts) for 256 MBit		*/
-#define CFG_MPTPR_2BK_8K	MPTPR_PTP_DIV8		/* setting for 2 banks	*/
+#define CONFIG_SYS_MPTPR_2BK_8K	MPTPR_PTP_DIV8		/* setting for 2 banks	*/
 #if defined (CONFIG_IVMS8_16M)
- #define CFG_MPTPR_1BK_8K	MPTPR_PTP_DIV16		/* setting for 1 bank	*/
+ #define CONFIG_SYS_MPTPR_1BK_8K	MPTPR_PTP_DIV16		/* setting for 1 bank	*/
 #elif defined (CONFIG_IVMS8_32M)
-#define CFG_MPTPR_1BK_8K	MPTPR_PTP_DIV16		/* setting for 1 bank	*/
+#define CONFIG_SYS_MPTPR_1BK_8K	MPTPR_PTP_DIV16		/* setting for 1 bank	*/
 #elif defined (CONFIG_IVMS8_64M)
-#define CFG_MPTPR_1BK_8K	MPTPR_PTP_DIV8		/* setting for 1 bank	*/
+#define CONFIG_SYS_MPTPR_1BK_8K	MPTPR_PTP_DIV8		/* setting for 1 bank	*/
 #endif
 
 
@@ -439,17 +439,17 @@
 
 #if defined (CONFIG_IVMS8_16M)
  /* 8 column SDRAM */
-# define CFG_MBMR_8COL	((CFG_MBMR_PTB << MBMR_PTB_SHIFT)  | \
+# define CONFIG_SYS_MBMR_8COL	((CONFIG_SYS_MBMR_PTB << MBMR_PTB_SHIFT)  | \
 			 MBMR_AMB_TYPE_0 | MBMR_DSB_1_CYCL | MBMR_G0CLB_A11 |	\
 			 MBMR_RLFB_1X	 | MBMR_WLFB_1X	   | MBMR_TLFB_4X)
 #elif defined (CONFIG_IVMS8_32M)
 /* 128 MBit SDRAM */
-#define CFG_MBMR_8COL	((CFG_MBMR_PTB << MBMR_PTB_SHIFT)  | \
+#define CONFIG_SYS_MBMR_8COL	((CONFIG_SYS_MBMR_PTB << MBMR_PTB_SHIFT)  | \
 			 MBMR_AMB_TYPE_1 | MBMR_DSB_1_CYCL | MBMR_G0CLB_A10 |	\
 			 MBMR_RLFB_1X	 | MBMR_WLFB_1X	   | MBMR_TLFB_4X)
 #elif defined (CONFIG_IVMS8_64M)
 /* 128 MBit SDRAM */
-#define CFG_MBMR_8COL	((CFG_MBMR_PTB << MBMR_PTB_SHIFT)  | \
+#define CONFIG_SYS_MBMR_8COL	((CONFIG_SYS_MBMR_PTB << MBMR_PTB_SHIFT)  | \
 			 MBMR_AMB_TYPE_1 | MBMR_DSB_1_CYCL | MBMR_G0CLB_A10 |	\
 			 MBMR_RLFB_1X	 | MBMR_WLFB_1X	   | MBMR_TLFB_4X)
 
diff --git a/include/configs/IceCube.h b/include/configs/IceCube.h
index 0b90946a3..f8c94ec2c 100644
--- a/include/configs/IceCube.h
+++ b/include/configs/IceCube.h
@@ -32,7 +32,7 @@
 #define CONFIG_MPC5xxx		1	/* This is an MPC5xxx CPU */
 #define CONFIG_ICECUBE		1	/* ... on IceCube board */
 
-#define CFG_MPC5XXX_CLKIN	33000000 /* ... running at 33.000000MHz */
+#define CONFIG_SYS_MPC5XXX_CLKIN	33000000 /* ... running at 33.000000MHz */
 
 #define BOOTFLAG_COLD		0x01	/* Normal Power-On: Boot from FLASH  */
 #define BOOTFLAG_WARM		0x02	/* Software reboot	     */
@@ -44,7 +44,7 @@
  */
 #define CONFIG_PSC_CONSOLE	1	/* console is on PSC1 */
 #define CONFIG_BAUDRATE		115200	/* ... at 115200 bps */
-#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
 
 
 #ifdef CONFIG_MPC5200	/* MPC5100 PCI is not supported yet. */
@@ -69,12 +69,12 @@
 #define CONFIG_PCI_IO_SIZE	0x01000000
 #endif
 
-#define CFG_XLB_PIPELINING	1
+#define CONFIG_SYS_XLB_PIPELINING	1
 
 #define CONFIG_NET_MULTI	1
 #define CONFIG_MII		1
 #define CONFIG_EEPRO100		1
-#define CFG_RX_ETH_BUFFER	8  /* use 8 rx buffer on eepro100  */
+#define CONFIG_SYS_RX_ETH_BUFFER	8  /* use 8 rx buffer on eepro100  */
 #define CONFIG_NS8382X		1
 
 #else
@@ -89,12 +89,12 @@
 /* USB */
 #define CONFIG_USB_OHCI_NEW
 #define CONFIG_USB_STORAGE
-#define CFG_OHCI_BE_CONTROLLER
-#undef CFG_USB_OHCI_BOARD_INIT
-#define CFG_USB_OHCI_CPU_INIT	1
-#define CFG_USB_OHCI_REGS_BASE	MPC5XXX_USB
-#define CFG_USB_OHCI_SLOT_NAME	"mpc5200"
-#define CFG_USB_OHCI_MAX_ROOT_PORTS	15
+#define CONFIG_SYS_OHCI_BE_CONTROLLER
+#undef CONFIG_SYS_USB_OHCI_BOARD_INIT
+#define CONFIG_SYS_USB_OHCI_CPU_INIT	1
+#define CONFIG_SYS_USB_OHCI_REGS_BASE	MPC5XXX_USB
+#define CONFIG_SYS_USB_OHCI_SLOT_NAME	"mpc5200"
+#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS	15
 
 #define	CONFIG_TIMESTAMP		/* Print image info with timestamp */
 
@@ -127,15 +127,15 @@
 
 
 #if (TEXT_BASE == 0xFF000000)		/* Boot low with 16 MB Flash */
-#   define CFG_LOWBOOT	        1
-#   define CFG_LOWBOOT16	1
+#   define CONFIG_SYS_LOWBOOT	        1
+#   define CONFIG_SYS_LOWBOOT16	1
 #endif
 #if (TEXT_BASE == 0xFF800000)		/* Boot low with  8 MB Flash */
 #if defined(CONFIG_LITE5200B)
-#   error CFG_LOWBOOT08 is incompatible with the Lite5200B
+#   error CONFIG_SYS_LOWBOOT08 is incompatible with the Lite5200B
 #else
-#   define CFG_LOWBOOT	        1
-#   define CFG_LOWBOOT08	1
+#   define CONFIG_SYS_LOWBOOT	        1
+#   define CONFIG_SYS_LOWBOOT08	1
 #endif
 #endif
 
@@ -174,9 +174,9 @@
  * IPB Bus clocking configuration.
  */
 #if defined(CONFIG_LITE5200B)
-#define CFG_IPBCLK_EQUALS_XLBCLK	/* define for 133MHz speed */
+#define CONFIG_SYS_IPBCLK_EQUALS_XLBCLK	/* define for 133MHz speed */
 #else
-#undef CFG_IPBCLK_EQUALS_XLBCLK		/* define for 133MHz speed */
+#undef CONFIG_SYS_IPBCLK_EQUALS_XLBCLK		/* define for 133MHz speed */
 #endif
 #endif /* CONFIG_MPC5200 */
 
@@ -193,101 +193,101 @@
  * I2C configuration
  */
 #define CONFIG_HARD_I2C		1	/* I2C with hardware support */
-#define CFG_I2C_MODULE		2	/* Select I2C module #1 or #2 */
+#define CONFIG_SYS_I2C_MODULE		2	/* Select I2C module #1 or #2 */
 
-#define CFG_I2C_SPEED		100000 /* 100 kHz */
-#define CFG_I2C_SLAVE		0x7F
+#define CONFIG_SYS_I2C_SPEED		100000 /* 100 kHz */
+#define CONFIG_SYS_I2C_SLAVE		0x7F
 
 /*
  * EEPROM configuration
  */
-#define CFG_I2C_EEPROM_ADDR		0x50	/* 1010000x */
-#define CFG_I2C_EEPROM_ADDR_LEN		1
-#define CFG_EEPROM_PAGE_WRITE_BITS	3
-#define CFG_EEPROM_PAGE_WRITE_DELAY_MS	70
+#define CONFIG_SYS_I2C_EEPROM_ADDR		0x50	/* 1010000x */
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN		1
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS	3
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	70
 
 /*
  * Flash configuration
  */
 #if defined(CONFIG_LITE5200B)
-#define CFG_FLASH_BASE		0xFE000000
-#define CFG_FLASH_SIZE		0x01000000
-#if !defined(CFG_LOWBOOT)
-#define CFG_ENV_ADDR		(CFG_FLASH_BASE + 0x01760000 + 0x00800000)
-#else	/* CFG_LOWBOOT */
-#if defined(CFG_LOWBOOT08)
-# error CFG_LOWBOOT08 is incompatible with the Lite5200B
+#define CONFIG_SYS_FLASH_BASE		0xFE000000
+#define CONFIG_SYS_FLASH_SIZE		0x01000000
+#if !defined(CONFIG_SYS_LOWBOOT)
+#define CONFIG_ENV_ADDR		(CONFIG_SYS_FLASH_BASE + 0x01760000 + 0x00800000)
+#else	/* CONFIG_SYS_LOWBOOT */
+#if defined(CONFIG_SYS_LOWBOOT08)
+# error CONFIG_SYS_LOWBOOT08 is incompatible with the Lite5200B
 #endif
-#if defined(CFG_LOWBOOT16)
-#define CFG_ENV_ADDR		(CFG_FLASH_BASE + 0x01060000)
+#if defined(CONFIG_SYS_LOWBOOT16)
+#define CONFIG_ENV_ADDR		(CONFIG_SYS_FLASH_BASE + 0x01060000)
 #endif
-#endif /* CFG_LOWBOOT */
+#endif /* CONFIG_SYS_LOWBOOT */
 #else /* !CONFIG_LITE5200B (IceCube)*/
-#define CFG_FLASH_BASE		0xFF000000
-#define CFG_FLASH_SIZE		0x01000000
-#if !defined(CFG_LOWBOOT)
-#define CFG_ENV_ADDR		(CFG_FLASH_BASE + 0x00740000 + 0x00800000)
-#else	/* CFG_LOWBOOT */
-#if defined(CFG_LOWBOOT08)
-#define CFG_ENV_ADDR		(CFG_FLASH_BASE + 0x00040000 + 0x00800000)
+#define CONFIG_SYS_FLASH_BASE		0xFF000000
+#define CONFIG_SYS_FLASH_SIZE		0x01000000
+#if !defined(CONFIG_SYS_LOWBOOT)
+#define CONFIG_ENV_ADDR		(CONFIG_SYS_FLASH_BASE + 0x00740000 + 0x00800000)
+#else	/* CONFIG_SYS_LOWBOOT */
+#if defined(CONFIG_SYS_LOWBOOT08)
+#define CONFIG_ENV_ADDR		(CONFIG_SYS_FLASH_BASE + 0x00040000 + 0x00800000)
 #endif
-#if defined(CFG_LOWBOOT16)
-#define CFG_ENV_ADDR		(CFG_FLASH_BASE + 0x00040000)
+#if defined(CONFIG_SYS_LOWBOOT16)
+#define CONFIG_ENV_ADDR		(CONFIG_SYS_FLASH_BASE + 0x00040000)
 #endif
-#endif	/* CFG_LOWBOOT */
+#endif	/* CONFIG_SYS_LOWBOOT */
 #endif /* CONFIG_LITE5200B */
-#define CFG_MAX_FLASH_BANKS	2	/* max num of memory banks      */
+#define CONFIG_SYS_MAX_FLASH_BANKS	2	/* max num of memory banks      */
 
-#define CFG_MAX_FLASH_SECT	128	/* max num of sects on one chip */
+#define CONFIG_SYS_MAX_FLASH_SECT	128	/* max num of sects on one chip */
 
-#define CFG_FLASH_ERASE_TOUT	240000	/* Flash Erase Timeout (in ms)  */
-#define CFG_FLASH_WRITE_TOUT	500	/* Flash Write Timeout (in ms)  */
+#define CONFIG_SYS_FLASH_ERASE_TOUT	240000	/* Flash Erase Timeout (in ms)  */
+#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Flash Write Timeout (in ms)  */
 
 #undef CONFIG_FLASH_16BIT	/* Flash is 8-bit */
 
 #if defined(CONFIG_LITE5200B)
 #define CONFIG_FLASH_CFI_DRIVER
-#define CFG_FLASH_CFI
-#define CFG_FLASH_BANKS_LIST	{CFG_CS1_START,CFG_CS0_START}
+#define CONFIG_SYS_FLASH_CFI
+#define CONFIG_SYS_FLASH_BANKS_LIST	{CONFIG_SYS_CS1_START,CONFIG_SYS_CS0_START}
 #endif
 
 
 /*
  * Environment settings
  */
-#define CFG_ENV_IS_IN_FLASH	1
-#define CFG_ENV_SIZE		0x10000
+#define CONFIG_ENV_IS_IN_FLASH	1
+#define CONFIG_ENV_SIZE		0x10000
 #if defined(CONFIG_LITE5200B)
-#define CFG_ENV_SECT_SIZE	0x20000
+#define CONFIG_ENV_SECT_SIZE	0x20000
 #else
-#define CFG_ENV_SECT_SIZE	0x10000
+#define CONFIG_ENV_SECT_SIZE	0x10000
 #endif
 #define CONFIG_ENV_OVERWRITE	1
 
 /*
  * Memory map
  */
-#define CFG_MBAR		0xF0000000
-#define CFG_SDRAM_BASE		0x00000000
-#define CFG_DEFAULT_MBAR	0x80000000
+#define CONFIG_SYS_MBAR		0xF0000000
+#define CONFIG_SYS_SDRAM_BASE		0x00000000
+#define CONFIG_SYS_DEFAULT_MBAR	0x80000000
 
 /* Use SRAM until RAM will be available */
-#define CFG_INIT_RAM_ADDR	MPC5XXX_SRAM
-#define CFG_INIT_RAM_END	MPC5XXX_SRAM_SIZE	/* End of used area in DPRAM */
+#define CONFIG_SYS_INIT_RAM_ADDR	MPC5XXX_SRAM
+#define CONFIG_SYS_INIT_RAM_END	MPC5XXX_SRAM_SIZE	/* End of used area in DPRAM */
 
 
-#define CFG_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
-#define CFG_MONITOR_BASE    TEXT_BASE
-#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
-#   define CFG_RAMBOOT		1
+#define CONFIG_SYS_MONITOR_BASE    TEXT_BASE
+#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
+#   define CONFIG_SYS_RAMBOOT		1
 #endif
 
-#define CFG_MONITOR_LEN		(192 << 10)	/* Reserve 192 kB for Monitor	*/
-#define CFG_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/
-#define CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
+#define CONFIG_SYS_MONITOR_LEN		(192 << 10)	/* Reserve 192 kB for Monitor	*/
+#define CONFIG_SYS_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/
+#define CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
 
 /*
  * Ethernet configuration
@@ -306,82 +306,82 @@
  * GPIO configuration
  */
 #ifdef CONFIG_MPC5200_DDR
-#define CFG_GPS_PORT_CONFIG	0x90000004
+#define CONFIG_SYS_GPS_PORT_CONFIG	0x90000004
 #else
-#define CFG_GPS_PORT_CONFIG	0x10000004
+#define CONFIG_SYS_GPS_PORT_CONFIG	0x10000004
 #endif
 
 /*
  * Miscellaneous configurable options
  */
-#define CFG_LONGHELP			/* undef to save memory	    */
-#define CFG_PROMPT		"=> "	/* Monitor Command Prompt   */
+#define CONFIG_SYS_LONGHELP			/* undef to save memory	    */
+#define CONFIG_SYS_PROMPT		"=> "	/* Monitor Command Prompt   */
 #if defined(CONFIG_CMD_KGDB)
-#define CFG_CBSIZE		1024	/* Console I/O Buffer Size  */
+#define CONFIG_SYS_CBSIZE		1024	/* Console I/O Buffer Size  */
 #else
-#define CFG_CBSIZE		256	/* Console I/O Buffer Size  */
+#define CONFIG_SYS_CBSIZE		256	/* Console I/O Buffer Size  */
 #endif
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16)	/* Print Buffer Size */
-#define CFG_MAXARGS		16		/* max number of command args	*/
-#define CFG_BARGSIZE		CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)	/* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS		16		/* max number of command args	*/
+#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
 
-#define CFG_MEMTEST_START	0x00100000	/* memtest works on */
-#define CFG_MEMTEST_END		0x00f00000	/* 1 ... 15 MB in DRAM	*/
+#define CONFIG_SYS_MEMTEST_START	0x00100000	/* memtest works on */
+#define CONFIG_SYS_MEMTEST_END		0x00f00000	/* 1 ... 15 MB in DRAM	*/
 
-#define CFG_LOAD_ADDR		0x100000	/* default load address */
+#define CONFIG_SYS_LOAD_ADDR		0x100000	/* default load address */
 
-#define CFG_HZ			1000	/* decrementer freq: 1 ms ticks */
+#define CONFIG_SYS_HZ			1000	/* decrementer freq: 1 ms ticks */
 
-#define CFG_CACHELINE_SIZE	32	/* For MPC5xxx CPUs */
+#define CONFIG_SYS_CACHELINE_SIZE	32	/* For MPC5xxx CPUs */
 #if defined(CONFIG_CMD_KGDB)
-#  define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value */
+#  define CONFIG_SYS_CACHELINE_SHIFT	5	/* log base 2 of the above value */
 #endif
 
 /*
  * Various low-level settings
  */
 #if defined(CONFIG_MPC5200)
-#define CFG_HID0_INIT		HID0_ICE | HID0_ICFI
-#define CFG_HID0_FINAL		HID0_ICE
+#define CONFIG_SYS_HID0_INIT		HID0_ICE | HID0_ICFI
+#define CONFIG_SYS_HID0_FINAL		HID0_ICE
 #else
-#define CFG_HID0_INIT		0
-#define CFG_HID0_FINAL		0
+#define CONFIG_SYS_HID0_INIT		0
+#define CONFIG_SYS_HID0_FINAL		0
 #endif
 
 #if defined(CONFIG_LITE5200B)
-#define CFG_CS1_START		CFG_FLASH_BASE
-#define CFG_CS1_SIZE		CFG_FLASH_SIZE
-#define CFG_CS1_CFG		0x00047800
-#define CFG_CS0_START		(CFG_FLASH_BASE + CFG_FLASH_SIZE)
-#define CFG_CS0_SIZE		CFG_FLASH_SIZE
-#define CFG_BOOTCS_START	CFG_CS0_START
-#define CFG_BOOTCS_SIZE		CFG_FLASH_SIZE
-#define CFG_BOOTCS_CFG		0x00047800
+#define CONFIG_SYS_CS1_START		CONFIG_SYS_FLASH_BASE
+#define CONFIG_SYS_CS1_SIZE		CONFIG_SYS_FLASH_SIZE
+#define CONFIG_SYS_CS1_CFG		0x00047800
+#define CONFIG_SYS_CS0_START		(CONFIG_SYS_FLASH_BASE + CONFIG_SYS_FLASH_SIZE)
+#define CONFIG_SYS_CS0_SIZE		CONFIG_SYS_FLASH_SIZE
+#define CONFIG_SYS_BOOTCS_START	CONFIG_SYS_CS0_START
+#define CONFIG_SYS_BOOTCS_SIZE		CONFIG_SYS_FLASH_SIZE
+#define CONFIG_SYS_BOOTCS_CFG		0x00047800
 #else /* IceCube aka Lite5200 */
 #ifdef CONFIG_MPC5200_DDR
 
-#define CFG_BOOTCS_START	(CFG_CS1_START + CFG_CS1_SIZE)
-#define CFG_BOOTCS_SIZE		0x00800000
-#define CFG_BOOTCS_CFG		0x00047801
-#define CFG_CS1_START		CFG_FLASH_BASE
-#define CFG_CS1_SIZE		0x00800000
-#define CFG_CS1_CFG		0x00047800
+#define CONFIG_SYS_BOOTCS_START	(CONFIG_SYS_CS1_START + CONFIG_SYS_CS1_SIZE)
+#define CONFIG_SYS_BOOTCS_SIZE		0x00800000
+#define CONFIG_SYS_BOOTCS_CFG		0x00047801
+#define CONFIG_SYS_CS1_START		CONFIG_SYS_FLASH_BASE
+#define CONFIG_SYS_CS1_SIZE		0x00800000
+#define CONFIG_SYS_CS1_CFG		0x00047800
 
 #else /* !CONFIG_MPC5200_DDR */
 
-#define CFG_BOOTCS_START	CFG_FLASH_BASE
-#define CFG_BOOTCS_SIZE		CFG_FLASH_SIZE
-#define CFG_BOOTCS_CFG		0x00047801
-#define CFG_CS0_START		CFG_FLASH_BASE
-#define CFG_CS0_SIZE		CFG_FLASH_SIZE
+#define CONFIG_SYS_BOOTCS_START	CONFIG_SYS_FLASH_BASE
+#define CONFIG_SYS_BOOTCS_SIZE		CONFIG_SYS_FLASH_SIZE
+#define CONFIG_SYS_BOOTCS_CFG		0x00047801
+#define CONFIG_SYS_CS0_START		CONFIG_SYS_FLASH_BASE
+#define CONFIG_SYS_CS0_SIZE		CONFIG_SYS_FLASH_SIZE
 
 #endif /* CONFIG_MPC5200_DDR */
 #endif /*CONFIG_LITE5200B */
 
-#define CFG_CS_BURST		0x00000000
-#define CFG_CS_DEADCYCLE	0x33333333
+#define CONFIG_SYS_CS_BURST		0x00000000
+#define CONFIG_SYS_CS_DEADCYCLE	0x33333333
 
-#define CFG_RESET_ADDRESS	0xff000000
+#define CONFIG_SYS_RESET_ADDRESS	0xff000000
 
 /*-----------------------------------------------------------------------
  * USB stuff
@@ -403,24 +403,24 @@
 #define	CONFIG_IDE_RESET		/* reset for ide supported	*/
 #define CONFIG_IDE_PREINIT
 
-#define CFG_IDE_MAXBUS		1	/* max. 1 IDE bus		*/
-#define CFG_IDE_MAXDEVICE	2	/* max. 1 drive per IDE bus	*/
+#define CONFIG_SYS_IDE_MAXBUS		1	/* max. 1 IDE bus		*/
+#define CONFIG_SYS_IDE_MAXDEVICE	2	/* max. 1 drive per IDE bus	*/
 
-#define CFG_ATA_IDE0_OFFSET	0x0000
+#define CONFIG_SYS_ATA_IDE0_OFFSET	0x0000
 
-#define CFG_ATA_BASE_ADDR	MPC5XXX_ATA
+#define CONFIG_SYS_ATA_BASE_ADDR	MPC5XXX_ATA
 
 /* Offset for data I/O			*/
-#define CFG_ATA_DATA_OFFSET	(0x0060)
+#define CONFIG_SYS_ATA_DATA_OFFSET	(0x0060)
 
 /* Offset for normal register accesses	*/
-#define CFG_ATA_REG_OFFSET	(CFG_ATA_DATA_OFFSET)
+#define CONFIG_SYS_ATA_REG_OFFSET	(CONFIG_SYS_ATA_DATA_OFFSET)
 
 /* Offset for alternate registers	*/
-#define CFG_ATA_ALT_OFFSET	(0x005C)
+#define CONFIG_SYS_ATA_ALT_OFFSET	(0x005C)
 
 /* Interval between registers                                                */
-#define CFG_ATA_STRIDE          4
+#define CONFIG_SYS_ATA_STRIDE          4
 
 #define CONFIG_ATAPI            1
 
diff --git a/include/configs/JSE.h b/include/configs/JSE.h
index 5b40ef6b4..8aca1f941 100644
--- a/include/configs/JSE.h
+++ b/include/configs/JSE.h
@@ -41,28 +41,28 @@
   /* ... with a 33MHz OSC. connected to the SysCLK input */
 #define CONFIG_SYS_CLK_FREQ	33333333
   /* ... with on-chip memory here (4KBytes) */
-#define CFG_OCM_DATA_ADDR 0xF4000000
-#define CFG_OCM_DATA_SIZE 0x00001000
+#define CONFIG_SYS_OCM_DATA_ADDR 0xF4000000
+#define CONFIG_SYS_OCM_DATA_SIZE 0x00001000
   /* Do not set up locked dcache as init ram. */
-#undef CFG_INIT_DCACHE_CS
+#undef CONFIG_SYS_INIT_DCACHE_CS
 
   /* Map the SystemACE chip (CS#1) here. (Must be a multiple of 1Meg) */
 #define CONFIG_SYSTEMACE 1
-#define CFG_SYSTEMACE_BASE 0xf0000000
-#define CFG_SYSTEMACE_WIDTH 8
+#define CONFIG_SYS_SYSTEMACE_BASE 0xf0000000
+#define CONFIG_SYS_SYSTEMACE_WIDTH 8
 #define CONFIG_DOS_PARTITION 1
 
   /* Use the On-Chip-Memory (OCM) as a temporary stack for the startup code. */
-#define CFG_TEMP_STACK_OCM 1
+#define CONFIG_SYS_TEMP_STACK_OCM 1
   /* ... place INIT RAM in the OCM address */
-# define CFG_INIT_RAM_ADDR	CFG_OCM_DATA_ADDR
+# define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_OCM_DATA_ADDR
   /* ... give it the whole init ram */
-# define CFG_INIT_RAM_END	CFG_OCM_DATA_SIZE
+# define CONFIG_SYS_INIT_RAM_END	CONFIG_SYS_OCM_DATA_SIZE
   /* ... Shave a bit off the end for global data */
-# define CFG_GBL_DATA_SIZE	128
-# define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+# define CONFIG_SYS_GBL_DATA_SIZE	128
+# define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
   /* ... and place the stack pointer at the top of what's left. */
-# define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+# define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
   /* Enable board_pre_init function */
 #define CONFIG_BOARD_PRE_INIT	1
@@ -72,28 +72,28 @@
   /* Disable call to post_init_f: late init function. */
 #undef CONFIG_POST
   /* Enable DRAM test. */
-#define CFG_DRAM_TEST 1
+#define CONFIG_SYS_DRAM_TEST 1
   /* Enable misc_init_r function. */
 #define CONFIG_MISC_INIT_R 1
 
   /* JSE has EEPROM chips that are good for environment. */
-#undef	CFG_ENV_IS_IN_NVRAM
-#undef	CFG_ENV_IS_IN_FLASH
-#define CFG_ENV_IS_IN_EEPROM 1
-#undef	CFG_ENV_IS_NOWHERE
+#undef	CONFIG_ENV_IS_IN_NVRAM
+#undef	CONFIG_ENV_IS_IN_FLASH
+#define CONFIG_ENV_IS_IN_EEPROM 1
+#undef	CONFIG_ENV_IS_NOWHERE
 
   /* This is the 7bit address of the device, not including P. */
-#define CFG_I2C_EEPROM_ADDR 0x50
+#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50
   /* After the device address, need one more address byte. */
-#define CFG_I2C_EEPROM_ADDR_LEN 1
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
   /* The EEPROM is 512 bytes. */
-#define CFG_EEPROM_SIZE 512
+#define CONFIG_SYS_EEPROM_SIZE 512
   /* The EEPROM can do 16byte ( 1 << 4 ) page writes. */
-#define CFG_EEPROM_PAGE_WRITE_BITS 4
-#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 4
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10
   /* Put the environment in the second half. */
-#define CFG_ENV_OFFSET	0x00
-#define CFG_ENV_SIZE	512
+#define CONFIG_ENV_OFFSET	0x00
+#define CONFIG_ENV_SIZE	512
 
 
   /* The JSE connects UART1 to the console tap connector. */
@@ -130,8 +130,9 @@
 
 
 #define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
-#define CFG_LOADS_BAUD_CHANGE	1	/* allow baudrate change	*/
+#define CONFIG_SYS_LOADS_BAUD_CHANGE	1	/* allow baudrate change	*/
 
+#define CONFIG_PPC4xx_EMAC
 #define CONFIG_MII		1	/* MII PHY management		*/
 #define CONFIG_PHY_ADDR		1	/* PHY address			*/
 
@@ -171,52 +172,52 @@
 /*
  * Miscellaneous configurable options
  */
-#define CFG_LONGHELP			/* undef to save memory		*/
-#define CFG_PROMPT	"=> "		/* Monitor Command Prompt	*/
+#define CONFIG_SYS_LONGHELP			/* undef to save memory		*/
+#define CONFIG_SYS_PROMPT	"=> "		/* Monitor Command Prompt	*/
 
-#define CFG_HUSH_PARSER			/* use "hush" command parser	*/
-#ifdef	CFG_HUSH_PARSER
-#define CFG_PROMPT_HUSH_PS2	"> "
+#define CONFIG_SYS_HUSH_PARSER			/* use "hush" command parser	*/
+#ifdef	CONFIG_SYS_HUSH_PARSER
+#define CONFIG_SYS_PROMPT_HUSH_PS2	"> "
 #endif
 
 #if defined(CONFIG_CMD_KGDB)
-#define CFG_CBSIZE	1024		/* Console I/O Buffer Size	*/
+#define CONFIG_SYS_CBSIZE	1024		/* Console I/O Buffer Size	*/
 #else
-#define CFG_CBSIZE	256		/* Console I/O Buffer Size	*/
+#define CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size	*/
 #endif
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define CFG_MAXARGS	16		/* max number of command args	*/
-#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS	16		/* max number of command args	*/
+#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
 
-#define CFG_MEMTEST_START	0x0400000	/* memtest works on	*/
-#define CFG_MEMTEST_END		0x0C00000	/* 4 ... 12 MB in DRAM	*/
+#define CONFIG_SYS_MEMTEST_START	0x0400000	/* memtest works on	*/
+#define CONFIG_SYS_MEMTEST_END		0x0C00000	/* 4 ... 12 MB in DRAM	*/
 
 /*
- * If CFG_EXT_SERIAL_CLOCK, then the UART divisor is 1.
- * If CFG_405_UART_ERRATA_59, then UART divisor is 31.
- * Otherwise, UART divisor is determined by CPU Clock and CFG_BASE_BAUD value.
+ * If CONFIG_SYS_EXT_SERIAL_CLOCK, then the UART divisor is 1.
+ * If CONFIG_SYS_405_UART_ERRATA_59, then UART divisor is 31.
+ * Otherwise, UART divisor is determined by CPU Clock and CONFIG_SYS_BASE_BAUD value.
  * The Linux BASE_BAUD define should match this configuration.
  *    baseBaud = cpuClock/(uartDivisor*16)
- * If CFG_405_UART_ERRATA_59 and 200MHz CPU clock,
+ * If CONFIG_SYS_405_UART_ERRATA_59 and 200MHz CPU clock,
  * set Linux BASE_BAUD to 403200.
  */
-#undef	CFG_EXT_SERIAL_CLOCK	       /* external serial clock */
-#undef	CFG_405_UART_ERRATA_59	       /* 405GP/CR Rev. D silicon */
-#define CFG_BASE_BAUD	    691200
+#undef	CONFIG_SYS_EXT_SERIAL_CLOCK	       /* external serial clock */
+#undef	CONFIG_SYS_405_UART_ERRATA_59	       /* 405GP/CR Rev. D silicon */
+#define CONFIG_SYS_BASE_BAUD	    691200
 
 /* The following table includes the supported baudrates */
-#define CFG_BAUDRATE_TABLE  \
+#define CONFIG_SYS_BAUDRATE_TABLE  \
     {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400}
 
-#define CFG_LOAD_ADDR		0x100000	/* default load address */
-#define CFG_EXTBDINFO		1	/* To use extended board_into (bd_t) */
+#define CONFIG_SYS_LOAD_ADDR		0x100000	/* default load address */
+#define CONFIG_SYS_EXTBDINFO		1	/* To use extended board_into (bd_t) */
 
-#define CFG_HZ		1000		/* decrementer freq: 1 ms ticks */
+#define CONFIG_SYS_HZ		1000		/* decrementer freq: 1 ms ticks */
 
 #define CONFIG_HARD_I2C		1	/* I2C with hardware support	*/
 #undef	CONFIG_SOFT_I2C			/* I2C bit-banged		*/
-#define CFG_I2C_SPEED		400000	/* I2C speed and slave address	*/
-#define CFG_I2C_SLAVE		0x7F
+#define CONFIG_SYS_I2C_SPEED		400000	/* I2C speed and slave address	*/
+#define CONFIG_SYS_I2C_SLAVE		0x7F
 
 
 /*-----------------------------------------------------------------------
@@ -232,14 +233,14 @@
 #undef	CONFIG_PCI_PNP			/* do pci plug-and-play		*/
 					/* resource configuration	*/
 
-#define CFG_PCI_SUBSYS_VENDORID 0x0000	/* PCI Vendor ID: to-do!!!	*/
-#define CFG_PCI_SUBSYS_DEVICEID 0x0000	/* PCI Device ID: to-do!!!	*/
-#define CFG_PCI_PTM1LA	0x00000000	/* point to sdram		*/
-#define CFG_PCI_PTM1MS	0x80000001	/* 2GB, enable hard-wired to 1	*/
-#define CFG_PCI_PTM1PCI 0x00000000	/* Host: use this pci address	*/
-#define CFG_PCI_PTM2LA	0x00000000	/* disabled			*/
-#define CFG_PCI_PTM2MS	0x00000000	/* disabled			*/
-#define CFG_PCI_PTM2PCI 0x04000000	/* Host: use this pci address	*/
+#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x0000	/* PCI Vendor ID: to-do!!!	*/
+#define CONFIG_SYS_PCI_SUBSYS_DEVICEID 0x0000	/* PCI Device ID: to-do!!!	*/
+#define CONFIG_SYS_PCI_PTM1LA	0x00000000	/* point to sdram		*/
+#define CONFIG_SYS_PCI_PTM1MS	0x80000001	/* 2GB, enable hard-wired to 1	*/
+#define CONFIG_SYS_PCI_PTM1PCI 0x00000000	/* Host: use this pci address	*/
+#define CONFIG_SYS_PCI_PTM2LA	0x00000000	/* disabled			*/
+#define CONFIG_SYS_PCI_PTM2MS	0x00000000	/* disabled			*/
+#define CONFIG_SYS_PCI_PTM2PCI 0x04000000	/* Host: use this pci address	*/
 
 /*-----------------------------------------------------------------------
  * External peripheral base address
@@ -248,36 +249,36 @@
 #undef	CONFIG_IDE_LED			/* no led for ide supported	*/
 #undef	CONFIG_IDE_RESET		/* no reset for ide supported	*/
 
-#define CFG_KEY_REG_BASE_ADDR	0xF0100000
-#define CFG_IR_REG_BASE_ADDR	0xF0200000
-#define CFG_FPGA_REG_BASE_ADDR	0xF0300000
+#define CONFIG_SYS_KEY_REG_BASE_ADDR	0xF0100000
+#define CONFIG_SYS_IR_REG_BASE_ADDR	0xF0200000
+#define CONFIG_SYS_FPGA_REG_BASE_ADDR	0xF0300000
 
 /*-----------------------------------------------------------------------
  * Start addresses for the final memory configuration
  * (Set up by the startup code)
- * Please note that CFG_SDRAM_BASE _must_ start at 0
+ * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
  */
-#define CFG_SDRAM_BASE		0x00000000
-#define CFG_FLASH_BASE		0xFFF80000
-#define CFG_MONITOR_BASE	CFG_FLASH_BASE
-#define CFG_MONITOR_LEN		(256 * 1024)	/* Reserve 256 kB for Monitor	*/
-#define CFG_MALLOC_LEN		(128 * 1024)	/* Reserve 128 kB for malloc()	*/
+#define CONFIG_SYS_SDRAM_BASE		0x00000000
+#define CONFIG_SYS_FLASH_BASE		0xFFF80000
+#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_FLASH_BASE
+#define CONFIG_SYS_MONITOR_LEN		(256 * 1024)	/* Reserve 256 kB for Monitor	*/
+#define CONFIG_SYS_MALLOC_LEN		(128 * 1024)	/* Reserve 128 kB for malloc()	*/
 
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
+#define CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
 
 /*-----------------------------------------------------------------------
  * FLASH organization
  */
-#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
-#define CFG_MAX_FLASH_SECT	256	/* max number of sectors on one chip	*/
+#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
+#define CONFIG_SYS_MAX_FLASH_SECT	256	/* max number of sectors on one chip	*/
 
-#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
-#define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
+#define CONFIG_SYS_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
+#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
 
 /*
  * Init Memory Controller:
@@ -285,7 +286,7 @@
  * BR0/1 and OR0/1 (FLASH)
  */
 
-#define FLASH_BASE0_PRELIM	CFG_FLASH_BASE	/* FLASH bank #0	*/
+#define FLASH_BASE0_PRELIM	CONFIG_SYS_FLASH_BASE	/* FLASH bank #0	*/
 #define FLASH_BASE1_PRELIM	0		/* FLASH bank #1	*/
 
 
diff --git a/include/configs/KAREF.h b/include/configs/KAREF.h
index 816e63ba2..4b67c9454 100644
--- a/include/configs/KAREF.h
+++ b/include/configs/KAREF.h
@@ -43,7 +43,7 @@
 #define CONFIG_BOARD_EARLY_INIT_F 1	     /* Call board_pre_init	*/
 #define CONFIG_MISC_INIT_F	  1	     /* Call board misc_init_f	*/
 #define CONFIG_MISC_INIT_R	  1	     /* Call board misc_init_r	*/
-#undef	CFG_DRAM_TEST			     /* Disable-takes long time!*/
+#undef	CONFIG_SYS_DRAM_TEST			     /* Disable-takes long time!*/
 #define CONFIG_SYS_CLK_FREQ	  66666666   /* external freq to pll	*/
 
 #define CONFIG_VERY_BIG_RAM 1
@@ -55,38 +55,38 @@
  * Base addresses -- Note these are effective addresses where the
  * actual resources get mapped (not physical addresses)
  *----------------------------------------------------------------------*/
-#define CFG_SDRAM_BASE	       0x00000000    /* _must_ be 0		*/
-#define CFG_FLASH_BASE	       0xfff80000    /* start of FLASH		*/
-#define CFG_MONITOR_BASE       0xfff80000    /* start of monitor	*/
-#define CFG_PCI_MEMBASE	       0x80000000    /* mapped pci memory	*/
-#define CFG_PERIPHERAL_BASE    0xe0000000    /* internal peripherals	*/
-#define CFG_ISRAM_BASE	       0xc0000000    /* internal SRAM		*/
-#define CFG_PCI_BASE	       0xd0000000    /* internal PCI regs	*/
-
-#define CFG_NVRAM_BASE_ADDR   (CFG_PERIPHERAL_BASE + 0x08000000)
-#define CFG_KAREF_FPGA_BASE   (CFG_PERIPHERAL_BASE + 0x08200000)
-#define CFG_OFEM_FPGA_BASE    (CFG_PERIPHERAL_BASE + 0x08400000)
-#define CFG_BME32_BASE	      (CFG_PERIPHERAL_BASE + 0x08500000)
-#define CFG_GPIO_BASE	      (CFG_PERIPHERAL_BASE + 0x00000700)
+#define CONFIG_SYS_SDRAM_BASE	       0x00000000    /* _must_ be 0		*/
+#define CONFIG_SYS_FLASH_BASE	       0xfff80000    /* start of FLASH		*/
+#define CONFIG_SYS_MONITOR_BASE       0xfff80000    /* start of monitor	*/
+#define CONFIG_SYS_PCI_MEMBASE	       0x80000000    /* mapped pci memory	*/
+#define CONFIG_SYS_PERIPHERAL_BASE    0xe0000000    /* internal peripherals	*/
+#define CONFIG_SYS_ISRAM_BASE	       0xc0000000    /* internal SRAM		*/
+#define CONFIG_SYS_PCI_BASE	       0xd0000000    /* internal PCI regs	*/
+
+#define CONFIG_SYS_NVRAM_BASE_ADDR   (CONFIG_SYS_PERIPHERAL_BASE + 0x08000000)
+#define CONFIG_SYS_KAREF_FPGA_BASE   (CONFIG_SYS_PERIPHERAL_BASE + 0x08200000)
+#define CONFIG_SYS_OFEM_FPGA_BASE    (CONFIG_SYS_PERIPHERAL_BASE + 0x08400000)
+#define CONFIG_SYS_BME32_BASE	      (CONFIG_SYS_PERIPHERAL_BASE + 0x08500000)
+#define CONFIG_SYS_GPIO_BASE	      (CONFIG_SYS_PERIPHERAL_BASE + 0x00000700)
 
 /* Here for completeness */
-#define CFG_OFEMAC_BASE	      (CFG_PERIPHERAL_BASE + 0x08600000)
+#define CONFIG_SYS_OFEMAC_BASE	      (CONFIG_SYS_PERIPHERAL_BASE + 0x08600000)
 
 /*-----------------------------------------------------------------------
  * Initial RAM & stack pointer (placed in internal SRAM)
  *----------------------------------------------------------------------*/
-#define CFG_TEMP_STACK_OCM    1
-#define CFG_OCM_DATA_ADDR     CFG_ISRAM_BASE
-#define CFG_INIT_RAM_ADDR     CFG_ISRAM_BASE /* Initial RAM address	*/
-#define CFG_INIT_RAM_END      0x2000	     /* End of used area in RAM */
-#define CFG_GBL_DATA_SIZE     128	     /* num bytes initial data	*/
+#define CONFIG_SYS_TEMP_STACK_OCM    1
+#define CONFIG_SYS_OCM_DATA_ADDR     CONFIG_SYS_ISRAM_BASE
+#define CONFIG_SYS_INIT_RAM_ADDR     CONFIG_SYS_ISRAM_BASE /* Initial RAM address	*/
+#define CONFIG_SYS_INIT_RAM_END      0x2000	     /* End of used area in RAM */
+#define CONFIG_SYS_GBL_DATA_SIZE     128	     /* num bytes initial data	*/
 
-#define CFG_GBL_DATA_OFFSET   (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_POST_WORD_ADDR    (CFG_GBL_DATA_OFFSET - 0x4)
-#define CFG_INIT_SP_OFFSET    CFG_POST_WORD_ADDR
+#define CONFIG_SYS_GBL_DATA_OFFSET   (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_POST_WORD_ADDR    (CONFIG_SYS_GBL_DATA_OFFSET - 0x4)
+#define CONFIG_SYS_INIT_SP_OFFSET    CONFIG_SYS_POST_WORD_ADDR
 
-#define CFG_MONITOR_LEN	      (256 * 1024)   /* Rsrv 256kB for Mon	*/
-#define CFG_MALLOC_LEN	      (128 * 1024)   /* Rsrv 128kB for malloc	*/
+#define CONFIG_SYS_MONITOR_LEN	      (256 * 1024)   /* Rsrv 256kB for Mon	*/
+#define CONFIG_SYS_MALLOC_LEN	      (128 * 1024)   /* Rsrv 128kB for malloc	*/
 
 /*-----------------------------------------------------------------------
  * Serial Port
@@ -95,7 +95,7 @@
 #define CONFIG_SERIAL_MULTI   1
 #define CONFIG_BAUDRATE	      9600
 
-#define CFG_BAUDRATE_TABLE  \
+#define CONFIG_SYS_BAUDRATE_TABLE  \
     {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
 
 /*-----------------------------------------------------------------------
@@ -105,21 +105,21 @@
  * The DS1743 code assumes this condition (i.e. -- it assumes the base
  * address for the RTC registers is:
  *
- *	CFG_NVRAM_BASE_ADDR + CFG_NVRAM_SIZE
+ *	CONFIG_SYS_NVRAM_BASE_ADDR + CONFIG_SYS_NVRAM_SIZE
  *
  *----------------------------------------------------------------------*/
-#define CFG_NVRAM_SIZE	      (0x2000 - 8)   /* NVRAM size(8k)- RTC regs*/
+#define CONFIG_SYS_NVRAM_SIZE	      (0x2000 - 8)   /* NVRAM size(8k)- RTC regs*/
 #define CONFIG_RTC_DS174x     1		     /* DS1743 RTC		*/
 
 /*-----------------------------------------------------------------------
  * FLASH related
  *----------------------------------------------------------------------*/
-#define CFG_MAX_FLASH_BANKS   1		     /* number of banks		*/
-#define CFG_MAX_FLASH_SECT    8		     /* sectors per device	*/
+#define CONFIG_SYS_MAX_FLASH_BANKS   1		     /* number of banks		*/
+#define CONFIG_SYS_MAX_FLASH_SECT    8		     /* sectors per device	*/
 
-#undef	CFG_FLASH_CHECKSUM
-#define CFG_FLASH_ERASE_TOUT  120000	     /* Flash Erase TO (in ms)	 */
-#define CFG_FLASH_WRITE_TOUT  500	     /* Flash Write TO(in ms)	 */
+#undef	CONFIG_SYS_FLASH_CHECKSUM
+#define CONFIG_SYS_FLASH_ERASE_TOUT  120000	     /* Flash Erase TO (in ms)	 */
+#define CONFIG_SYS_FLASH_WRITE_TOUT  500	     /* Flash Write TO(in ms)	 */
 
 /*-----------------------------------------------------------------------
  * DDR SDRAM
@@ -132,31 +132,32 @@
  *----------------------------------------------------------------------*/
 #define CONFIG_HARD_I2C	      1		     /* I2C hardware support	*/
 #undef	CONFIG_SOFT_I2C			     /* I2C !bit-banged		*/
-#define CFG_I2C_SPEED	      400000	     /* I2C speed 400kHz	*/
-#define CFG_I2C_SLAVE	      0x7F	     /* I2C slave address	*/
-#define CFG_I2C_NOPROBES      {0x69}	     /* Don't probe these addrs */
+#define CONFIG_SYS_I2C_SPEED	      400000	     /* I2C speed 400kHz	*/
+#define CONFIG_SYS_I2C_SLAVE	      0x7F	     /* I2C slave address	*/
+#define CONFIG_SYS_I2C_NOPROBES      {0x69}	     /* Don't probe these addrs */
 #define CONFIG_I2C_BUS1	      1		     /* Include i2c bus 1 supp	*/
 
 
 /*-----------------------------------------------------------------------
  * Environment
  *----------------------------------------------------------------------*/
-#define CFG_ENV_IS_IN_NVRAM   1		     /* Environment uses NVRAM	*/
-#undef	CFG_ENV_IS_IN_FLASH		     /* ... not in flash	*/
-#undef	CFG_ENV_IS_IN_EEPROM		     /* ... not in EEPROM	*/
+#define CONFIG_ENV_IS_IN_NVRAM   1		     /* Environment uses NVRAM	*/
+#undef	CONFIG_ENV_IS_IN_FLASH		     /* ... not in flash	*/
+#undef	CONFIG_ENV_IS_IN_EEPROM		     /* ... not in EEPROM	*/
 #define CONFIG_ENV_OVERWRITE  1		     /* allow env overwrite	*/
 
-#define CFG_ENV_SIZE	      0x1000	     /* Size of Env vars	*/
-#define CFG_ENV_ADDR	      (CFG_NVRAM_BASE_ADDR)
+#define CONFIG_ENV_SIZE	      0x1000	     /* Size of Env vars	*/
+#define CONFIG_ENV_ADDR	      (CONFIG_SYS_NVRAM_BASE_ADDR)
 
 #define CONFIG_BOOTDELAY      5		    /* 5 second autoboot */
 
 #define CONFIG_LOADS_ECHO     1		     /* echo on for serial dnld */
-#define CFG_LOADS_BAUD_CHANGE 1		     /* allow baudrate change	*/
+#define CONFIG_SYS_LOADS_BAUD_CHANGE 1		     /* allow baudrate change	*/
 
 /*-----------------------------------------------------------------------
  * Networking
  *----------------------------------------------------------------------*/
+#define CONFIG_PPC4xx_EMAC
 #define CONFIG_MII	      1		     /* MII PHY management	*/
 #define CONFIG_NET_MULTI      1
 #define CONFIG_PHY_ADDR	      0xff	     /* no phy on EMAC0		*/
@@ -175,7 +176,7 @@
 #define CONFIG_NETMASK	      255.255.0.0
 #define CONFIG_ETHADDR	      00:00:00:00:00:00 /* No EMAC 0 support	*/
 #define CONFIG_ETH1ADDR	      00:00:00:00:00:00 /* No EMAC 1 support	*/
-#define CFG_RX_ETH_BUFFER     32	     /* #eth rx buff & descrs	*/
+#define CONFIG_SYS_RX_ETH_BUFFER     32	     /* #eth rx buff & descrs	*/
 
 
 /*
@@ -212,33 +213,33 @@
 
 /* Include auto complete with tabs */
 #define CONFIG_AUTO_COMPLETE 1
-#define CFG_ALT_MEMTEST	     1	     /* use real memory test	 */
+#define CONFIG_SYS_ALT_MEMTEST	     1	     /* use real memory test	 */
 
-#define CFG_LONGHELP			     /* undef to save memory	*/
-#define CFG_PROMPT	      "KaRefDes=> "  /* Monitor Command Prompt	*/
+#define CONFIG_SYS_LONGHELP			     /* undef to save memory	*/
+#define CONFIG_SYS_PROMPT	      "KaRefDes=> "  /* Monitor Command Prompt	*/
 
-#define CFG_HUSH_PARSER	       1	     /* HUSH for ext'd cli	*/
-#define CFG_PROMPT_HUSH_PS2    "> "
+#define CONFIG_SYS_HUSH_PARSER	       1	     /* HUSH for ext'd cli	*/
+#define CONFIG_SYS_PROMPT_HUSH_PS2    "> "
 
 
 /*-----------------------------------------------------------------------
  * Console Buffer
  *----------------------------------------------------------------------*/
 #if defined(CONFIG_CMD_KGDB)
-#define CFG_CBSIZE	      1024	     /* Console I/O Buffer Size */
+#define CONFIG_SYS_CBSIZE	      1024	     /* Console I/O Buffer Size */
 #else
-#define CFG_CBSIZE	      256	     /* Console I/O Buffer Size */
+#define CONFIG_SYS_CBSIZE	      256	     /* Console I/O Buffer Size */
 #endif
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16)
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
 					     /* Print Buffer Size	*/
-#define CFG_MAXARGS	      16	     /* max number of cmd args	*/
-#define CFG_BARGSIZE	      CFG_CBSIZE     /* Boot Arg Buffer Size	*/
+#define CONFIG_SYS_MAXARGS	      16	     /* max number of cmd args	*/
+#define CONFIG_SYS_BARGSIZE	      CONFIG_SYS_CBSIZE     /* Boot Arg Buffer Size	*/
 
 /*-----------------------------------------------------------------------
  * Memory Test
  *----------------------------------------------------------------------*/
-#define CFG_MEMTEST_START     0x0400000	     /* memtest works on	*/
-#define CFG_MEMTEST_END	      0x0C00000	     /* 4 ... 12 MB in DRAM	*/
+#define CONFIG_SYS_MEMTEST_START     0x0400000	     /* memtest works on	*/
+#define CONFIG_SYS_MEMTEST_END	      0x0C00000	     /* 4 ... 12 MB in DRAM	*/
 
 /*-----------------------------------------------------------------------
  * Compact Flash (in true IDE mode)
@@ -247,16 +248,16 @@
 #undef	CONFIG_IDE_LED			/* no led for ide supported	*/
 
 #define CONFIG_IDE_RESET		/* reset for ide supported	*/
-#define CFG_IDE_MAXBUS		1	/* max. 1 IDE busses	*/
-#define CFG_IDE_MAXDEVICE	(CFG_IDE_MAXBUS*1) /* max. 1 drives per IDE bus */
+#define CONFIG_SYS_IDE_MAXBUS		1	/* max. 1 IDE busses	*/
+#define CONFIG_SYS_IDE_MAXDEVICE	(CONFIG_SYS_IDE_MAXBUS*1) /* max. 1 drives per IDE bus */
 
-#define CFG_ATA_BASE_ADDR	0xF0000000
-#define CFG_ATA_IDE0_OFFSET	0x0000
-#define CFG_ATA_DATA_OFFSET	0x0000	 /* Offset for data I/O */
-#define CFG_ATA_REG_OFFSET	0x0000	 /* Offset for normal register accesses*/
-#define CFG_ATA_ALT_OFFSET	0x100000 /* Offset for alternate registers */
+#define CONFIG_SYS_ATA_BASE_ADDR	0xF0000000
+#define CONFIG_SYS_ATA_IDE0_OFFSET	0x0000
+#define CONFIG_SYS_ATA_DATA_OFFSET	0x0000	 /* Offset for data I/O */
+#define CONFIG_SYS_ATA_REG_OFFSET	0x0000	 /* Offset for normal register accesses*/
+#define CONFIG_SYS_ATA_ALT_OFFSET	0x100000 /* Offset for alternate registers */
 
-#define CFG_ATA_STRIDE		2	 /* Directly connected CF, needs a stride
+#define CONFIG_SYS_ATA_STRIDE		2	 /* Directly connected CF, needs a stride
 					    to get to the correct offset */
 #define CONFIG_DOS_PARTITION  1		     /* Include dos partition	*/
 
@@ -267,20 +268,20 @@
 #define CONFIG_PCI			     /* include pci support	*/
 #define CONFIG_PCI_PNP			     /* do pci plug-and-play	*/
 #define CONFIG_PCI_SCAN_SHOW		     /* show pci devices	*/
-#define CFG_PCI_TARGBASE      (CFG_PCI_MEMBASE)
+#define CONFIG_SYS_PCI_TARGBASE      (CONFIG_SYS_PCI_MEMBASE)
 
 /* Board-specific PCI */
-#define CFG_PCI_TARGET_INIT		     /* let board init pci target*/
+#define CONFIG_SYS_PCI_TARGET_INIT		     /* let board init pci target*/
 
-#define CFG_PCI_SUBSYS_VENDORID 0x17BA	     /* Sandburst */
-#define CFG_PCI_SUBSYS_DEVICEID 0xcafe	     /* Whatever */
+#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x17BA	     /* Sandburst */
+#define CONFIG_SYS_PCI_SUBSYS_DEVICEID 0xcafe	     /* Whatever */
 
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define CFG_BOOTMAPSZ		(8 << 20) /* Initial Memory map for Linux */
+#define CONFIG_SYS_BOOTMAPSZ		(8 << 20) /* Initial Memory map for Linux */
 
 /*
  * Internal Definitions
@@ -299,10 +300,10 @@
  * Miscellaneous configurable options
  *----------------------------------------------------------------------*/
 #undef CONFIG_WATCHDOG			     /* watchdog disabled	*/
-#define CFG_LOAD_ADDR	      0x8000000	     /* default load address	*/
-#define CFG_EXTBDINFO	      1		     /* use extended board_info */
+#define CONFIG_SYS_LOAD_ADDR	      0x8000000	     /* default load address	*/
+#define CONFIG_SYS_EXTBDINFO	      1		     /* use extended board_info */
 
-#define CFG_HZ		      100	     /* decr freq: 1 ms ticks	*/
+#define CONFIG_SYS_HZ		      100	     /* decr freq: 1 ms ticks	*/
 
 
 #endif	/* __CONFIG_H */
diff --git a/include/configs/KUP4K.h b/include/configs/KUP4K.h
index e52fbfde0..a82998464 100644
--- a/include/configs/KUP4K.h
+++ b/include/configs/KUP4K.h
@@ -81,7 +81,7 @@
 #define CONFIG_MISC_INIT_F	1
 
 #define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
-#undef	CFG_LOADS_BAUD_CHANGE		/* don't allow baudrate change	*/
+#undef	CONFIG_SYS_LOADS_BAUD_CHANGE		/* don't allow baudrate change	*/
 
 #define	CONFIG_WATCHDOG	1		/* watchdog enabled		*/
 
@@ -109,8 +109,8 @@
 #undef	CONFIG_HARD_I2C			/* I2C with hardware support	*/
 #define	CONFIG_SOFT_I2C         1	/* I2C bit-banged		*/
 
-#define CFG_I2C_SPEED		93000	/* 93 kHz is supposed to work	*/
-#define CFG_I2C_SLAVE		0xFE
+#define CONFIG_SYS_I2C_SPEED		93000	/* 93 kHz is supposed to work	*/
+#define CONFIG_SYS_I2C_SLAVE		0xFE
 
 #ifdef CONFIG_SOFT_I2C
 /*
@@ -135,20 +135,20 @@
  * I2C Configuration
  */
 
-#define CFG_I2C_PICIO_ADDR	0x21	/* PCF8574 IO Expander			*/
-#define CFG_I2C_RTC_ADDR	0x51	/* PCF8563 RTC				*/
+#define CONFIG_SYS_I2C_PICIO_ADDR	0x21	/* PCF8574 IO Expander			*/
+#define CONFIG_SYS_I2C_RTC_ADDR	0x51	/* PCF8563 RTC				*/
 
 
 /* List of I2C addresses to be verified by POST */
 
-#define I2C_ADDR_LIST	{CFG_I2C_PICIO_ADDR,	\
-			CFG_I2C_RTC_ADDR,	\
+#define I2C_ADDR_LIST	{CONFIG_SYS_I2C_PICIO_ADDR,	\
+			CONFIG_SYS_I2C_RTC_ADDR,	\
 			}
 
 
 #define CONFIG_RTC_PCF8563		/* use Philips PCF8563 RTC	*/
 
-#define CFG_DISCOVER_PHY
+#define CONFIG_SYS_DISCOVER_PHY
 #define CONFIG_MII
 
 #if 0
@@ -161,9 +161,9 @@
 #if 1
 /* POST support */
 
-#define CONFIG_POST		(CFG_POST_CPU	   | \
-				 CFG_POST_RTC	   | \
-				 CFG_POST_I2C)
+#define CONFIG_POST		(CONFIG_SYS_POST_CPU	   | \
+				 CONFIG_SYS_POST_RTC	   | \
+				 CONFIG_SYS_POST_I2C)
 #endif
 
 
@@ -186,27 +186,27 @@
 /*
  * Miscellaneous configurable options
  */
-#define CFG_LONGHELP			/* undef to save memory		*/
-#define CFG_PROMPT	"=> "		/* Monitor Command Prompt	*/
+#define CONFIG_SYS_LONGHELP			/* undef to save memory		*/
+#define CONFIG_SYS_PROMPT	"=> "		/* Monitor Command Prompt	*/
 #if defined(CONFIG_CMD_KGDB)
-#define CFG_CBSIZE	1024		/* Console I/O Buffer Size	*/
+#define CONFIG_SYS_CBSIZE	1024		/* Console I/O Buffer Size	*/
 #else
-#define CFG_CBSIZE	256		/* Console I/O Buffer Size	*/
+#define CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size	*/
 #endif
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define CFG_MAXARGS	16		/* max number of command args	*/
-#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS	16		/* max number of command args	*/
+#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
 
-#define CFG_MEMTEST_START	0x000400000	/* memtest works on	*/
-#define CFG_MEMTEST_END		0x002C00000	/* 4 ... 44 MB in DRAM	*/
+#define CONFIG_SYS_MEMTEST_START	0x000400000	/* memtest works on	*/
+#define CONFIG_SYS_MEMTEST_END		0x002C00000	/* 4 ... 44 MB in DRAM	*/
 
-#define CFG_LOAD_ADDR		0x200000	/* default load address */
+#define CONFIG_SYS_LOAD_ADDR		0x200000	/* default load address */
 
-#define CFG_HZ		1000		/* decrementer freq: 1 ms ticks */
+#define CONFIG_SYS_HZ		1000		/* decrementer freq: 1 ms ticks */
 
-#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 115200 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 115200 }
 
-#define CFG_CONSOLE_INFO_QUIET 1
+#define CONFIG_SYS_CONSOLE_INFO_QUIET 1
 
 /*
  * Low Level Configuration Settings
@@ -216,68 +216,68 @@
 /*-----------------------------------------------------------------------
  * Internal Memory Mapped Register
  */
-#define CFG_IMMR		0xFFF00000
+#define CONFIG_SYS_IMMR		0xFFF00000
 
 /*-----------------------------------------------------------------------
  * Definitions for initial stack pointer and data area (in DPRAM)
  */
-#define CFG_INIT_RAM_ADDR	CFG_IMMR
-#define CFG_INIT_RAM_END	0x2F00	/* End of used area in DPRAM	*/
-#define CFG_GBL_DATA_SIZE	64  /* size in bytes reserved for initial data */
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_IMMR
+#define CONFIG_SYS_INIT_RAM_END	0x2F00	/* End of used area in DPRAM	*/
+#define CONFIG_SYS_GBL_DATA_SIZE	64  /* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
 /*-----------------------------------------------------------------------
  * Start addresses for the final memory configuration
  * (Set up by the startup code)
- * Please note that CFG_SDRAM_BASE _must_ start at 0
+ * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
  */
-#define CFG_SDRAM_BASE		0x00000000
-#define CFG_FLASH_BASE		0x40000000
-#define CFG_MONITOR_LEN		(192 << 10)	/* Reserve 192 kB for Monitor	*/
-#define CFG_MONITOR_BASE	CFG_FLASH_BASE
-#define CFG_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/
+#define CONFIG_SYS_SDRAM_BASE		0x00000000
+#define CONFIG_SYS_FLASH_BASE		0x40000000
+#define CONFIG_SYS_MONITOR_LEN		(192 << 10)	/* Reserve 192 kB for Monitor	*/
+#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_FLASH_BASE
+#define CONFIG_SYS_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/
 
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
+#define CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
 
 /*-----------------------------------------------------------------------
  * FLASH organization
  */
-#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
-#define CFG_MAX_FLASH_SECT	19	/* max number of sectors on one chip	*/
+#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
+#define CONFIG_SYS_MAX_FLASH_SECT	19	/* max number of sectors on one chip	*/
 
-#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
-#define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
+#define CONFIG_SYS_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
+#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
 
-#define CFG_ENV_IS_IN_FLASH	1
-#define CFG_ENV_OFFSET		0x40000 /*   Offset   of Environment Sector	*/
-#define CFG_ENV_SIZE		0x1000	/* Total Size of Environment Sector	*/
-#define CFG_ENV_SECT_SIZE	0x10000
+#define CONFIG_ENV_IS_IN_FLASH	1
+#define CONFIG_ENV_OFFSET		0x40000 /*   Offset   of Environment Sector	*/
+#define CONFIG_ENV_SIZE		0x1000	/* Total Size of Environment Sector	*/
+#define CONFIG_ENV_SECT_SIZE	0x10000
 
 /* Address and size of Redundant Environment Sector	*/
 #if 0
-#define CFG_ENV_OFFSET_REDUND	(CFG_ENV_OFFSET+CFG_ENV_SIZE)
-#define CFG_ENV_SIZE_REDUND	(CFG_ENV_SIZE)
+#define CONFIG_ENV_OFFSET_REDUND	(CONFIG_ENV_OFFSET+CONFIG_ENV_SIZE)
+#define CONFIG_ENV_SIZE_REDUND	(CONFIG_ENV_SIZE)
 #endif
 /*-----------------------------------------------------------------------
  * Hardware Information Block
  */
 #if 1
-#define CFG_HWINFO_OFFSET	0x000F0000	/* offset of HW Info block */
-#define CFG_HWINFO_SIZE		0x00000100	/* size   of HW Info block */
-#define CFG_HWINFO_MAGIC	0x4B26500D	/* 'K&P<CR>' */
+#define CONFIG_SYS_HWINFO_OFFSET	0x000F0000	/* offset of HW Info block */
+#define CONFIG_SYS_HWINFO_SIZE		0x00000100	/* size   of HW Info block */
+#define CONFIG_SYS_HWINFO_MAGIC	0x4B26500D	/* 'K&P<CR>' */
 #endif
 /*-----------------------------------------------------------------------
  * Cache Configuration
  */
-#define CFG_CACHELINE_SIZE	16	/* For all MPC8xx CPUs			*/
+#define CONFIG_SYS_CACHELINE_SIZE	16	/* For all MPC8xx CPUs			*/
 #if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT	4	/* log base 2 of the above value	*/
+#define CONFIG_SYS_CACHELINE_SHIFT	4	/* log base 2 of the above value	*/
 #endif
 
 /*-----------------------------------------------------------------------
@@ -287,10 +287,10 @@
  * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze
  */
 #if 0 && defined(CONFIG_WATCHDOG)       /* KUP uses external TPS3705 WD */
-#define CFG_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
+#define CONFIG_SYS_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
 			 SYPCR_SWE  | SYPCR_SWRI| SYPCR_SWP)
 #else
-#define CFG_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
+#define CONFIG_SYS_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
 #endif
 
 /*-----------------------------------------------------------------------
@@ -298,27 +298,27 @@
  *-----------------------------------------------------------------------
  * PCMCIA config., multi-function pin tri-state
  */
-#define CFG_SIUMCR	(SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_MLRC00)
+#define CONFIG_SYS_SIUMCR	(SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_MLRC00)
 
 /*-----------------------------------------------------------------------
  * TBSCR - Time Base Status and Control				11-26
  *-----------------------------------------------------------------------
  * Clear Reference Interrupt Status, Timebase freezing enabled
  */
-#define CFG_TBSCR	(TBSCR_REFA | TBSCR_REFB | TBSCR_TBF)
+#define CONFIG_SYS_TBSCR	(TBSCR_REFA | TBSCR_REFB | TBSCR_TBF)
 
 /*-----------------------------------------------------------------------
  * RTCSC - Real-Time Clock Status and Control Register		11-27
  *-----------------------------------------------------------------------
  */
-#define CFG_RTCSC	(RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE)
+#define CONFIG_SYS_RTCSC	(RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE)
 
 /*-----------------------------------------------------------------------
  * PISCR - Periodic Interrupt Status and Control		11-31
  *-----------------------------------------------------------------------
  * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
  */
-#define CFG_PISCR	(PISCR_PS | PISCR_PITF)
+#define CONFIG_SYS_PISCR	(PISCR_PS | PISCR_PITF)
 
 /*-----------------------------------------------------------------------
  * PLPRCR - PLL, Low-Power, and Reset Control Register		15-30
@@ -328,7 +328,7 @@
  *
  * If this is a 80 MHz CPU, set PLL multiplication factor to 5 (5*16=80)!
  */
-#define CFG_PLPRCR ( (5-1)<<PLPRCR_MF_SHIFT | PLPRCR_TEXPS | PLPRCR_TMIST )
+#define CONFIG_SYS_PLPRCR ( (5-1)<<PLPRCR_MF_SHIFT | PLPRCR_TEXPS | PLPRCR_TMIST )
 
 /*-----------------------------------------------------------------------
  * SCCR - System Clock and reset Control Register		15-27
@@ -337,7 +337,7 @@
  * power management and some other internal clocks
  */
 #define SCCR_MASK	SCCR_EBDF00
-#define CFG_SCCR	(SCCR_TBS | SCCR_EBDF01 |  \
+#define CONFIG_SYS_SCCR	(SCCR_TBS | SCCR_EBDF01 |  \
 			 SCCR_COM00   | SCCR_DFSYNC00 | SCCR_DFBRG00  | \
 			 SCCR_DFNL000 | SCCR_DFNH000  | SCCR_DFLCD000 | \
 			 SCCR_DFALCD00)
@@ -351,14 +351,14 @@
 /* KUP4K use both slots, SLOT_A as "primary". */
 #define CONFIG_PCMCIA_SLOT_A 1
 
-#define CFG_PCMCIA_MEM_ADDR	(0xE0000000)
-#define CFG_PCMCIA_MEM_SIZE	( 64 << 20 )
-#define CFG_PCMCIA_DMA_ADDR	(0xE4000000)
-#define CFG_PCMCIA_DMA_SIZE	( 64 << 20 )
-#define CFG_PCMCIA_ATTRB_ADDR	(0xE8000000)
-#define CFG_PCMCIA_ATTRB_SIZE	( 64 << 20 )
-#define CFG_PCMCIA_IO_ADDR	(0xEC000000)
-#define CFG_PCMCIA_IO_SIZE	( 64 << 20 )
+#define CONFIG_SYS_PCMCIA_MEM_ADDR	(0xE0000000)
+#define CONFIG_SYS_PCMCIA_MEM_SIZE	( 64 << 20 )
+#define CONFIG_SYS_PCMCIA_DMA_ADDR	(0xE4000000)
+#define CONFIG_SYS_PCMCIA_DMA_SIZE	( 64 << 20 )
+#define CONFIG_SYS_PCMCIA_ATTRB_ADDR	(0xE8000000)
+#define CONFIG_SYS_PCMCIA_ATTRB_SIZE	( 64 << 20 )
+#define CONFIG_SYS_PCMCIA_IO_ADDR	(0xEC000000)
+#define CONFIG_SYS_PCMCIA_IO_SIZE	( 64 << 20 )
 
 #define PCMCIA_SOCKETS_NO 2
 #define PCMCIA_MEM_WIN_NO 8
@@ -373,23 +373,23 @@
 #define CONFIG_IDE_LED		1	/* LED	 for ide supported	*/
 #undef	CONFIG_IDE_RESET		/* reset for ide not supported	*/
 
-#define CFG_IDE_MAXBUS		2
-#define CFG_IDE_MAXDEVICE	4
+#define CONFIG_SYS_IDE_MAXBUS		2
+#define CONFIG_SYS_IDE_MAXDEVICE	4
 
-#define CFG_ATA_IDE0_OFFSET	0x0000
+#define CONFIG_SYS_ATA_IDE0_OFFSET	0x0000
 
-#define CFG_ATA_IDE1_OFFSET	(4 * CFG_PCMCIA_MEM_SIZE)
+#define CONFIG_SYS_ATA_IDE1_OFFSET	(4 * CONFIG_SYS_PCMCIA_MEM_SIZE)
 
-#define CFG_ATA_BASE_ADDR	CFG_PCMCIA_MEM_ADDR
+#define CONFIG_SYS_ATA_BASE_ADDR	CONFIG_SYS_PCMCIA_MEM_ADDR
 
 /* Offset for data I/O			*/
-#define CFG_ATA_DATA_OFFSET	(CFG_PCMCIA_MEM_SIZE + 0x320)
+#define CONFIG_SYS_ATA_DATA_OFFSET	(CONFIG_SYS_PCMCIA_MEM_SIZE + 0x320)
 
 /* Offset for normal register accesses	*/
-#define CFG_ATA_REG_OFFSET	(2 * CFG_PCMCIA_MEM_SIZE + 0x320)
+#define CONFIG_SYS_ATA_REG_OFFSET	(2 * CONFIG_SYS_PCMCIA_MEM_SIZE + 0x320)
 
 /* Offset for alternate registers	*/
-#define CFG_ATA_ALT_OFFSET	0x0100
+#define CONFIG_SYS_ATA_ALT_OFFSET	0x0100
 
 
 /*-----------------------------------------------------------------------
@@ -397,7 +397,7 @@
  *-----------------------------------------------------------------------
  *
  */
-#define CFG_DER 0
+#define CONFIG_SYS_DER 0
 
 /*
  * Init Memory Controller:
@@ -410,22 +410,22 @@
  * restrict access enough to keep SRAM working (if any)
  * but not too much to meddle with FLASH accesses
  */
-#define CFG_REMAP_OR_AM		0x80000000	/* OR addr mask */
-#define CFG_PRELIM_OR_AM	0xE0000000	/* OR addr mask */
+#define CONFIG_SYS_REMAP_OR_AM		0x80000000	/* OR addr mask */
+#define CONFIG_SYS_PRELIM_OR_AM	0xE0000000	/* OR addr mask */
 
 /*
  * FLASH timing:
  */
-#define CFG_OR_TIMING_FLASH	(OR_ACS_DIV1  | OR_TRLX | OR_CSNT_SAM | \
+#define CONFIG_SYS_OR_TIMING_FLASH	(OR_ACS_DIV1  | OR_TRLX | OR_CSNT_SAM | \
 				 OR_SCY_2_CLK | OR_EHTR | OR_BI)
 
-#define CFG_OR0_REMAP	(CFG_REMAP_OR_AM  | CFG_OR_TIMING_FLASH)
-#define CFG_OR0_PRELIM	(CFG_PRELIM_OR_AM | CFG_OR_TIMING_FLASH)
-#define CFG_BR0_PRELIM	((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_PS_16 | BR_V )
+#define CONFIG_SYS_OR0_REMAP	(CONFIG_SYS_REMAP_OR_AM  | CONFIG_SYS_OR_TIMING_FLASH)
+#define CONFIG_SYS_OR0_PRELIM	(CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_FLASH)
+#define CONFIG_SYS_BR0_PRELIM	((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_PS_16 | BR_V )
 
 
 /* SDRAM timing: Multiplexed addresses, GPL5 output to GPL5_A (don't care)	*/
-#define CFG_OR_TIMING_SDRAM	0x00000A00
+#define CONFIG_SYS_OR_TIMING_SDRAM	0x00000A00
 
 
 /*
@@ -455,11 +455,11 @@
  * 80 Mhz => 80.000.000 / Divider = 156
  */
 #if   defined(CONFIG_80MHz)
-#define CFG_MAMR_PTA		156
+#define CONFIG_SYS_MAMR_PTA		156
 #elif defined(CONFIG_66MHz)
-#define CFG_MAMR_PTA		129
+#define CONFIG_SYS_MAMR_PTA		129
 #else		/*   50 MHz */
-#define CFG_MAMR_PTA		 98
+#define CONFIG_SYS_MAMR_PTA		 98
 #endif	/*CONFIG_??MHz */
 
 /*
@@ -467,15 +467,15 @@
  * (= 64 ms / 2K = 125 / quad bursts).
  * For a simpler initialization, 15.6 us is used instead.
  *
- * #define CFG_MPTPR_2BK_2K	MPTPR_PTP_DIV32		for 2 banks
- * #define CFG_MPTPR_1BK_2K	MPTPR_PTP_DIV64		for 1 bank
+ * #define CONFIG_SYS_MPTPR_2BK_2K	MPTPR_PTP_DIV32		for 2 banks
+ * #define CONFIG_SYS_MPTPR_1BK_2K	MPTPR_PTP_DIV64		for 1 bank
  */
-#define CFG_MPTPR 0x400
+#define CONFIG_SYS_MPTPR 0x400
 
 /*
  * MAMR settings for SDRAM
  */
-#define CFG_MAMR 0x80802114
+#define CONFIG_SYS_MAMR 0x80802114
 
 /*
  * Internal Definitions
diff --git a/include/configs/KUP4X.h b/include/configs/KUP4X.h
index be0c7af8f..be6dfda6e 100644
--- a/include/configs/KUP4X.h
+++ b/include/configs/KUP4X.h
@@ -50,11 +50,11 @@
 
 #define CONFIG_BOARD_TYPES	1	/* support board types			*/
 
-#define CFG_8XX_FACT		8	/* Multiply by 8			*/
-#define CFG_8XX_XIN		16000000	/* 16 MHz in			*/
+#define CONFIG_SYS_8XX_FACT		8	/* Multiply by 8			*/
+#define CONFIG_SYS_8XX_XIN		16000000	/* 16 MHz in			*/
 
 
-#define MPC8XX_HZ ((CFG_8XX_XIN) * (CFG_8XX_FACT))
+#define MPC8XX_HZ ((CONFIG_SYS_8XX_XIN) * (CONFIG_SYS_8XX_FACT))
 
 /* should ALWAYS define this, measure_gclk in speed.c is unreliable */
 /* in general, we always know this for FADS+new ADS anyway */
@@ -91,7 +91,7 @@
 #define CONFIG_MISC_INIT_F	1
 
 #define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
-#undef	CFG_LOADS_BAUD_CHANGE		/* don't allow baudrate change	*/
+#undef	CONFIG_SYS_LOADS_BAUD_CHANGE		/* don't allow baudrate change	*/
 
 #define	CONFIG_WATCHDOG		1	/* watchdog enabled		*/
 
@@ -118,8 +118,8 @@
 #undef	CONFIG_HARD_I2C			/* I2C with hardware support	*/
 #define	CONFIG_SOFT_I2C         1	/* I2C bit-banged		*/
 
-#define CFG_I2C_SPEED		93000	/* 93 kHz is supposed to work	*/
-#define CFG_I2C_SLAVE		0xFE
+#define CONFIG_SYS_I2C_SPEED		93000	/* 93 kHz is supposed to work	*/
+#define CONFIG_SYS_I2C_SLAVE		0xFE
 
 #ifdef CONFIG_SOFT_I2C
 /*
@@ -144,20 +144,20 @@
  * I2C Configuration
  */
 
-#define CFG_I2C_PICIO_ADDR	0x21	/* PCF8574 IO Expander			*/
-#define CFG_I2C_RTC_ADDR	0x51	/* PCF8563 RTC				*/
+#define CONFIG_SYS_I2C_PICIO_ADDR	0x21	/* PCF8574 IO Expander			*/
+#define CONFIG_SYS_I2C_RTC_ADDR	0x51	/* PCF8563 RTC				*/
 
 
 /* List of I2C addresses to be verified by POST */
 
-#define I2C_ADDR_LIST	{CFG_I2C_PICIO_ADDR,	\
-			CFG_I2C_RTC_ADDR,	\
+#define I2C_ADDR_LIST	{CONFIG_SYS_I2C_PICIO_ADDR,	\
+			CONFIG_SYS_I2C_RTC_ADDR,	\
 			}
 
 
 #define CONFIG_RTC_PCF8563		/* use Philips PCF8563 RTC	*/
 
-#define CFG_DISCOVER_PHY
+#define CONFIG_SYS_DISCOVER_PHY
 #define CONFIG_MII
 
 #if 0
@@ -172,9 +172,9 @@
 #if 1
 /* POST support */
 
-#define CONFIG_POST		(CFG_POST_CPU	   | \
-				 CFG_POST_RTC	   | \
-				 CFG_POST_I2C)
+#define CONFIG_POST		(CONFIG_SYS_POST_CPU	   | \
+				 CONFIG_SYS_POST_RTC	   | \
+				 CONFIG_SYS_POST_I2C)
 #endif
 
 
@@ -199,26 +199,26 @@
 /*
  * Miscellaneous configurable options
  */
-#define CFG_LONGHELP			/* undef to save memory		*/
-#define CFG_PROMPT	"=> "		/* Monitor Command Prompt	*/
+#define CONFIG_SYS_LONGHELP			/* undef to save memory		*/
+#define CONFIG_SYS_PROMPT	"=> "		/* Monitor Command Prompt	*/
 #if defined(CONFIG_CMD_KGDB)
-#define CFG_CBSIZE	1024		/* Console I/O Buffer Size	*/
+#define CONFIG_SYS_CBSIZE	1024		/* Console I/O Buffer Size	*/
 #else
-#define CFG_CBSIZE	256		/* Console I/O Buffer Size	*/
+#define CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size	*/
 #endif
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define CFG_MAXARGS	16		/* max number of command args	*/
-#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS	16		/* max number of command args	*/
+#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
 
-#define CFG_MEMTEST_START	0x000400000	/* memtest works on	*/
-#define CFG_MEMTEST_END		0x003C00000	/* 4 ... 60 MB in DRAM	*/
-#define CFG_LOAD_ADDR		0x200000	/* default load address */
+#define CONFIG_SYS_MEMTEST_START	0x000400000	/* memtest works on	*/
+#define CONFIG_SYS_MEMTEST_END		0x003C00000	/* 4 ... 60 MB in DRAM	*/
+#define CONFIG_SYS_LOAD_ADDR		0x200000	/* default load address */
 
-#define CFG_HZ		1000		/* decrementer freq: 1 ms ticks */
+#define CONFIG_SYS_HZ		1000		/* decrementer freq: 1 ms ticks */
 
-#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 115200 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 115200 }
 
-#define CFG_CONSOLE_INFO_QUIET 1
+#define CONFIG_SYS_CONSOLE_INFO_QUIET 1
 
 /*
  * Low Level Configuration Settings
@@ -228,68 +228,68 @@
 /*-----------------------------------------------------------------------
  * Internal Memory Mapped Register
  */
-#define CFG_IMMR		0xFFF00000
+#define CONFIG_SYS_IMMR		0xFFF00000
 
 /*-----------------------------------------------------------------------
  * Definitions for initial stack pointer and data area (in DPRAM)
  */
-#define CFG_INIT_RAM_ADDR	CFG_IMMR
-#define CFG_INIT_RAM_END	0x2F00	/* End of used area in DPRAM	*/
-#define CFG_GBL_DATA_SIZE	64	/* size in bytes reserved for initial data */
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_IMMR
+#define CONFIG_SYS_INIT_RAM_END	0x2F00	/* End of used area in DPRAM	*/
+#define CONFIG_SYS_GBL_DATA_SIZE	64	/* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
 /*-----------------------------------------------------------------------
  * Start addresses for the final memory configuration
  * (Set up by the startup code)
- * Please note that CFG_SDRAM_BASE _must_ start at 0
+ * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
  */
-#define CFG_SDRAM_BASE		0x00000000
-#define CFG_FLASH_BASE		0x40000000
-#define CFG_MONITOR_LEN		(192 << 10)	/* Reserve 256 kB for Monitor	*/
-#define CFG_MONITOR_BASE	CFG_FLASH_BASE
-#define CFG_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/
+#define CONFIG_SYS_SDRAM_BASE		0x00000000
+#define CONFIG_SYS_FLASH_BASE		0x40000000
+#define CONFIG_SYS_MONITOR_LEN		(192 << 10)	/* Reserve 256 kB for Monitor	*/
+#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_FLASH_BASE
+#define CONFIG_SYS_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/
 
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
+#define CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
 
 /*-----------------------------------------------------------------------
  * FLASH organization
  */
-#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
-#define CFG_MAX_FLASH_SECT	19	/* max number of sectors on one chip	*/
+#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
+#define CONFIG_SYS_MAX_FLASH_SECT	19	/* max number of sectors on one chip	*/
 
-#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
-#define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
+#define CONFIG_SYS_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
+#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
 
-#define CFG_ENV_IS_IN_FLASH	1
-#define CFG_ENV_OFFSET		0x40000 /*   Offset   of Environment Sector	*/
-#define CFG_ENV_SIZE		0x1000	/* Total Size of Environment Sector	*/
-#define CFG_ENV_SECT_SIZE	0x10000
+#define CONFIG_ENV_IS_IN_FLASH	1
+#define CONFIG_ENV_OFFSET		0x40000 /*   Offset   of Environment Sector	*/
+#define CONFIG_ENV_SIZE		0x1000	/* Total Size of Environment Sector	*/
+#define CONFIG_ENV_SECT_SIZE	0x10000
 
 /* Address and size of Redundant Environment Sector	*/
 #if 0
-#define CFG_ENV_OFFSET_REDUND	(CFG_ENV_OFFSET+CFG_ENV_SIZE)
-#define CFG_ENV_SIZE_REDUND	(CFG_ENV_SIZE)
+#define CONFIG_ENV_OFFSET_REDUND	(CONFIG_ENV_OFFSET+CONFIG_ENV_SIZE)
+#define CONFIG_ENV_SIZE_REDUND	(CONFIG_ENV_SIZE)
 #endif
 /*-----------------------------------------------------------------------
  * Hardware Information Block
  */
 #if 1
-#define CFG_HWINFO_OFFSET	0x000F0000	/* offset of HW Info block */
-#define CFG_HWINFO_SIZE		0x00000100	/* size   of HW Info block */
-#define CFG_HWINFO_MAGIC	0x4B26500D	/* 'K&P<CR>' */
+#define CONFIG_SYS_HWINFO_OFFSET	0x000F0000	/* offset of HW Info block */
+#define CONFIG_SYS_HWINFO_SIZE		0x00000100	/* size   of HW Info block */
+#define CONFIG_SYS_HWINFO_MAGIC	0x4B26500D	/* 'K&P<CR>' */
 #endif
 /*-----------------------------------------------------------------------
  * Cache Configuration
  */
-#define CFG_CACHELINE_SIZE	16	/* For all MPC8xx CPUs			*/
+#define CONFIG_SYS_CACHELINE_SIZE	16	/* For all MPC8xx CPUs			*/
 #if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT	4	/* log base 2 of the above value	*/
+#define CONFIG_SYS_CACHELINE_SHIFT	4	/* log base 2 of the above value	*/
 #endif
 
 /*-----------------------------------------------------------------------
@@ -299,10 +299,10 @@
  * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze
  */
 #if 0 && defined(CONFIG_WATCHDOG)       /* KUP uses external TPS3705 WD */
-#define CFG_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
+#define CONFIG_SYS_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
 			 SYPCR_SWE  | SYPCR_SWRI| SYPCR_SWP)
 #else
-#define CFG_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
+#define CONFIG_SYS_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
 #endif
 
 /*-----------------------------------------------------------------------
@@ -310,14 +310,14 @@
  *-----------------------------------------------------------------------
  * PCMCIA config., multi-function pin tri-state
  */
-#define CFG_SIUMCR	(SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_MLRC00)
+#define CONFIG_SYS_SIUMCR	(SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_MLRC00)
 
 /*-----------------------------------------------------------------------
  * TBSCR - Time Base Status and Control				11-26
  *-----------------------------------------------------------------------
  * Clear Reference Interrupt Status, Timebase freezing enabled
  */
-#define CFG_TBSCR	(TBSCR_REFA | TBSCR_REFB | TBSCR_TBF)
+#define CONFIG_SYS_TBSCR	(TBSCR_REFA | TBSCR_REFB | TBSCR_TBF)
 
 
 /*-----------------------------------------------------------------------
@@ -325,7 +325,7 @@
  *-----------------------------------------------------------------------
  * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
  */
-#define CFG_PISCR	(PISCR_PS | PISCR_PITF)
+#define CONFIG_SYS_PISCR	(PISCR_PS | PISCR_PITF)
 
 
 /*-----------------------------------------------------------------------
@@ -333,7 +333,7 @@
  *-----------------------------------------------------------------------
  * set the PLL, the low-power modes and the reset control (15-29)
  */
-#define CFG_PLPRCR	((CFG_8XX_FACT << PLPRCR_MFI_SHIFT) |	\
+#define CONFIG_SYS_PLPRCR	((CONFIG_SYS_8XX_FACT << PLPRCR_MFI_SHIFT) |	\
 				PLPRCR_SPLSS | PLPRCR_TEXPS)
 
 
@@ -344,7 +344,7 @@
  * power management and some other internal clocks
  */
 #define SCCR_MASK	SCCR_EBDF00
-#define CFG_SCCR	(SCCR_TBS | SCCR_EBDF01 |  \
+#define CONFIG_SYS_SCCR	(SCCR_TBS | SCCR_EBDF01 |  \
 			 SCCR_COM00   | SCCR_DFSYNC00 | SCCR_DFBRG00  | \
 			 SCCR_DFNL000 | SCCR_DFNH000  | SCCR_DFLCD000 | \
 			 SCCR_DFALCD00)
@@ -358,14 +358,14 @@
 /* KUP4K use both slots, SLOT_A as "primary". */
 #define CONFIG_PCMCIA_SLOT_A 1
 
-#define CFG_PCMCIA_MEM_ADDR	(0xE0000000)
-#define CFG_PCMCIA_MEM_SIZE	( 64 << 20 )
-#define CFG_PCMCIA_DMA_ADDR	(0xE4000000)
-#define CFG_PCMCIA_DMA_SIZE	( 64 << 20 )
-#define CFG_PCMCIA_ATTRB_ADDR	(0xE8000000)
-#define CFG_PCMCIA_ATTRB_SIZE	( 64 << 20 )
-#define CFG_PCMCIA_IO_ADDR	(0xEC000000)
-#define CFG_PCMCIA_IO_SIZE	( 64 << 20 )
+#define CONFIG_SYS_PCMCIA_MEM_ADDR	(0xE0000000)
+#define CONFIG_SYS_PCMCIA_MEM_SIZE	( 64 << 20 )
+#define CONFIG_SYS_PCMCIA_DMA_ADDR	(0xE4000000)
+#define CONFIG_SYS_PCMCIA_DMA_SIZE	( 64 << 20 )
+#define CONFIG_SYS_PCMCIA_ATTRB_ADDR	(0xE8000000)
+#define CONFIG_SYS_PCMCIA_ATTRB_SIZE	( 64 << 20 )
+#define CONFIG_SYS_PCMCIA_IO_ADDR	(0xEC000000)
+#define CONFIG_SYS_PCMCIA_IO_SIZE	( 64 << 20 )
 
 #define PCMCIA_SOCKETS_NO 1
 #define PCMCIA_MEM_WIN_NO 8
@@ -380,23 +380,23 @@
 #define CONFIG_IDE_LED			1   /* LED   for ide supported	*/
 #undef	CONFIG_IDE_RESET		/* reset for ide not supported	*/
 
-#define CFG_IDE_MAXBUS		1
-#define CFG_IDE_MAXDEVICE	2
+#define CONFIG_SYS_IDE_MAXBUS		1
+#define CONFIG_SYS_IDE_MAXDEVICE	2
 
-#define CFG_ATA_IDE0_OFFSET	0x0000
+#define CONFIG_SYS_ATA_IDE0_OFFSET	0x0000
 
-#define CFG_ATA_IDE1_OFFSET	(4 * CFG_PCMCIA_MEM_SIZE)
+#define CONFIG_SYS_ATA_IDE1_OFFSET	(4 * CONFIG_SYS_PCMCIA_MEM_SIZE)
 
-#define CFG_ATA_BASE_ADDR	CFG_PCMCIA_MEM_ADDR
+#define CONFIG_SYS_ATA_BASE_ADDR	CONFIG_SYS_PCMCIA_MEM_ADDR
 
 /* Offset for data I/O			*/
-#define CFG_ATA_DATA_OFFSET	(CFG_PCMCIA_MEM_SIZE + 0x320)
+#define CONFIG_SYS_ATA_DATA_OFFSET	(CONFIG_SYS_PCMCIA_MEM_SIZE + 0x320)
 
 /* Offset for normal register accesses	*/
-#define CFG_ATA_REG_OFFSET	(2 * CFG_PCMCIA_MEM_SIZE + 0x320)
+#define CONFIG_SYS_ATA_REG_OFFSET	(2 * CONFIG_SYS_PCMCIA_MEM_SIZE + 0x320)
 
 /* Offset for alternate registers	*/
-#define CFG_ATA_ALT_OFFSET	0x0100
+#define CONFIG_SYS_ATA_ALT_OFFSET	0x0100
 
 
 /*-----------------------------------------------------------------------
@@ -404,7 +404,7 @@
  *-----------------------------------------------------------------------
  *
  */
-#define CFG_DER 0
+#define CONFIG_SYS_DER 0
 
 /*
  * Init Memory Controller:
@@ -417,30 +417,30 @@
  * restrict access enough to keep SRAM working (if any)
  * but not too much to meddle with FLASH accesses
  */
-#define CFG_REMAP_OR_AM		0x80000000	/* OR addr mask */
-#define CFG_PRELIM_OR_AM	0xE0000000	/* OR addr mask */
+#define CONFIG_SYS_REMAP_OR_AM		0x80000000	/* OR addr mask */
+#define CONFIG_SYS_PRELIM_OR_AM	0xE0000000	/* OR addr mask */
 
 /*
  * FLASH timing:
  */
-#define CFG_OR_TIMING_FLASH	(OR_ACS_DIV1  | OR_TRLX | OR_CSNT_SAM | \
+#define CONFIG_SYS_OR_TIMING_FLASH	(OR_ACS_DIV1  | OR_TRLX | OR_CSNT_SAM | \
 				 OR_SCY_2_CLK | OR_EHTR | OR_BI)
 
-#define CFG_OR0_REMAP	(CFG_REMAP_OR_AM  | CFG_OR_TIMING_FLASH)
-#define CFG_OR0_PRELIM	(CFG_PRELIM_OR_AM | CFG_OR_TIMING_FLASH)
-#define CFG_BR0_PRELIM	((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_PS_16 | BR_V )
+#define CONFIG_SYS_OR0_REMAP	(CONFIG_SYS_REMAP_OR_AM  | CONFIG_SYS_OR_TIMING_FLASH)
+#define CONFIG_SYS_OR0_PRELIM	(CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_FLASH)
+#define CONFIG_SYS_BR0_PRELIM	((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_PS_16 | BR_V )
 
 
 /* SDRAM timing: Multiplexed addresses, GPL5 output to GPL5_A (don't care)	*/
-#define CFG_OR_TIMING_SDRAM	0x00000A00
+#define CONFIG_SYS_OR_TIMING_SDRAM	0x00000A00
 
 
-#define CFG_MPTPR 0x400
+#define CONFIG_SYS_MPTPR 0x400
 
 /*
  * MAMR settings for SDRAM
  */
-#define CFG_MAMR 0x80802114
+#define CONFIG_SYS_MAMR 0x80802114
 
 
 /*
diff --git a/include/configs/LANTEC.h b/include/configs/LANTEC.h
index e92069b5a..f14d9455d 100644
--- a/include/configs/LANTEC.h
+++ b/include/configs/LANTEC.h
@@ -68,7 +68,7 @@
 	"setenv bootargs root=/dev/ram panic=5;bootm 40040000 400A0000"
 
 #define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
-#undef	CFG_LOADS_BAUD_CHANGE		/* don't allow baudrate change	*/
+#undef	CONFIG_SYS_LOADS_BAUD_CHANGE		/* don't allow baudrate change	*/
 
 #undef	CONFIG_WATCHDOG			/* watchdog disabled		*/
 
@@ -119,25 +119,25 @@
 /*
  * Miscellaneous configurable options
  */
-#define	CFG_LONGHELP			/* undef to save memory		*/
-#define	CFG_PROMPT	"=> "		/* Monitor Command Prompt	*/
+#define	CONFIG_SYS_LONGHELP			/* undef to save memory		*/
+#define	CONFIG_SYS_PROMPT	"=> "		/* Monitor Command Prompt	*/
 #if defined(CONFIG_CMD_KGDB)
-#define	CFG_CBSIZE	1024		/* Console I/O Buffer Size	*/
+#define	CONFIG_SYS_CBSIZE	1024		/* Console I/O Buffer Size	*/
 #else
-#define	CFG_CBSIZE	256		/* Console I/O Buffer Size	*/
+#define	CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size	*/
 #endif
-#define	CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define	CFG_MAXARGS	16		/* max number of command args	*/
-#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+#define	CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define	CONFIG_SYS_MAXARGS	16		/* max number of command args	*/
+#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
 
-#define CFG_MEMTEST_START	0x0400000	/* memtest works on	*/
-#define CFG_MEMTEST_END		0x0C00000	/* 4 ... 12 MB in DRAM	*/
+#define CONFIG_SYS_MEMTEST_START	0x0400000	/* memtest works on	*/
+#define CONFIG_SYS_MEMTEST_END		0x0C00000	/* 4 ... 12 MB in DRAM	*/
 
-#define	CFG_LOAD_ADDR		0x100000	/* default load address	*/
+#define	CONFIG_SYS_LOAD_ADDR		0x100000	/* default load address	*/
 
-#define	CFG_HZ		1000		/* decrementer freq: 1 ms ticks	*/
+#define	CONFIG_SYS_HZ		1000		/* decrementer freq: 1 ms ticks	*/
 
-#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
 
 /*
  * Low Level Configuration Settings
@@ -147,54 +147,54 @@
 /*-----------------------------------------------------------------------
  * Internal Memory Mapped Register
  */
-#define CFG_IMMR		0xFFF00000
+#define CONFIG_SYS_IMMR		0xFFF00000
 
 /*-----------------------------------------------------------------------
  * Definitions for initial stack pointer and data area (in DPRAM)
  */
-#define CFG_INIT_RAM_ADDR	CFG_IMMR
-#define	CFG_INIT_RAM_END	0x2F00	/* End of used area in DPRAM	*/
-#define	CFG_GBL_DATA_SIZE	64  /* size in bytes reserved for initial data */
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define	CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_IMMR
+#define	CONFIG_SYS_INIT_RAM_END	0x2F00	/* End of used area in DPRAM	*/
+#define	CONFIG_SYS_GBL_DATA_SIZE	64  /* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define	CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
 /*-----------------------------------------------------------------------
  * Start addresses for the final memory configuration
  * (Set up by the startup code)
- * Please note that CFG_SDRAM_BASE _must_ start at 0
+ * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
  */
-#define	CFG_SDRAM_BASE		0x00000000
-#define CFG_FLASH_BASE		0x40000000
-#define	CFG_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor	*/
-#define CFG_MONITOR_BASE	CFG_FLASH_BASE
-#define	CFG_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/
+#define	CONFIG_SYS_SDRAM_BASE		0x00000000
+#define CONFIG_SYS_FLASH_BASE		0x40000000
+#define	CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor	*/
+#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_FLASH_BASE
+#define	CONFIG_SYS_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/
 
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define	CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux	*/
+#define	CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux	*/
 
 /*-----------------------------------------------------------------------
  * FLASH organization
  */
-#define CFG_MAX_FLASH_BANKS	2	/* max number of memory banks		*/
-#define CFG_MAX_FLASH_SECT	67	/* max number of sectors on one chip	*/
+#define CONFIG_SYS_MAX_FLASH_BANKS	2	/* max number of memory banks		*/
+#define CONFIG_SYS_MAX_FLASH_SECT	67	/* max number of sectors on one chip	*/
 
-#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
-#define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
+#define CONFIG_SYS_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
+#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
 
-#define	CFG_ENV_IS_IN_FLASH	1
-#define	CFG_ENV_OFFSET		0x8000	/*   Offset   of Environment Sector	*/
-#define	CFG_ENV_SIZE		0x4000	/* Total Size of Environment Sector	*/
+#define	CONFIG_ENV_IS_IN_FLASH	1
+#define	CONFIG_ENV_OFFSET		0x8000	/*   Offset   of Environment Sector	*/
+#define	CONFIG_ENV_SIZE		0x4000	/* Total Size of Environment Sector	*/
 
 /*-----------------------------------------------------------------------
  * Cache Configuration
  */
-#define CFG_CACHELINE_SIZE	16	/* For all MPC8xx CPUs			*/
+#define CONFIG_SYS_CACHELINE_SIZE	16	/* For all MPC8xx CPUs			*/
 #if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT	4	/* log base 2 of the above value	*/
+#define CONFIG_SYS_CACHELINE_SHIFT	4	/* log base 2 of the above value	*/
 #endif
 
 /*-----------------------------------------------------------------------
@@ -204,10 +204,10 @@
  * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze
  */
 #if defined(CONFIG_WATCHDOG)
-#define CFG_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
+#define CONFIG_SYS_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
 			 SYPCR_SWE  | SYPCR_SWRI| SYPCR_SWP)
 #else
-#define CFG_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
+#define CONFIG_SYS_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
 #endif
 
 /*-----------------------------------------------------------------------
@@ -215,7 +215,7 @@
  *-----------------------------------------------------------------------
  * PCMCIA config., multi-function pin tri-state
  */
-#define CFG_SIUMCR	(SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_MLRC01 | SIUMCR_DLK)
+#define CONFIG_SYS_SIUMCR	(SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_MLRC01 | SIUMCR_DLK)
 
 /*-----------------------------------------------------------------------
  * Clock Setting - Has the Lantec board a 32kHz clock ??? [XXX]
@@ -228,20 +228,20 @@
  *-----------------------------------------------------------------------
  * Clear Reference Interrupt Status, Timebase freezing enabled
  */
-#define CFG_TBSCR	(TBSCR_REFA | TBSCR_REFB | TBSCR_TBF)
+#define CONFIG_SYS_TBSCR	(TBSCR_REFA | TBSCR_REFB | TBSCR_TBF)
 
 /*-----------------------------------------------------------------------
  * RTCSC - Real-Time Clock Status and Control Register		11-27
  *-----------------------------------------------------------------------
  */
-#define CFG_RTCSC	(RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE)
+#define CONFIG_SYS_RTCSC	(RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE)
 
 /*-----------------------------------------------------------------------
  * PISCR - Periodic Interrupt Status and Control		11-31
  *-----------------------------------------------------------------------
  * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
  */
-#define CFG_PISCR	(PISCR_PS | PISCR_PITF)
+#define CONFIG_SYS_PISCR	(PISCR_PS | PISCR_PITF)
 
 /*-----------------------------------------------------------------------
  * PLPRCR - PLL, Low-Power, and Reset Control Register		15-30
@@ -252,7 +252,7 @@
  * If this is a 80 MHz CPU, set PLL multiplication factor to 5 (5*16=80)!
  */
 			/* up to 50 MHz we use a 1:1 clock */
-#define CFG_PLPRCR	(PLPRCR_SPLSS | PLPRCR_TEXPS | PLPRCR_TMIST)
+#define CONFIG_SYS_PLPRCR	(PLPRCR_SPLSS | PLPRCR_TEXPS | PLPRCR_TMIST)
 
 /*-----------------------------------------------------------------------
  * SCCR - System Clock and reset Control Register		15-27
@@ -262,7 +262,7 @@
  */
 #define SCCR_MASK	SCCR_EBDF11
 			/* up to 50 MHz we use a 1:1 clock */
-#define CFG_SCCR	(SCCR_TBS     | \
+#define CONFIG_SYS_SCCR	(SCCR_TBS     | \
 			 SCCR_COM00   | SCCR_DFSYNC00 | SCCR_DFBRG00  | \
 			 SCCR_DFNL000 | SCCR_DFNH000  | SCCR_DFLCD000 | \
 			 SCCR_DFALCD00)
@@ -272,7 +272,7 @@
  *-----------------------------------------------------------------------
  *
  */
-#define CFG_DER	0
+#define CONFIG_SYS_DER	0
 
 /*
  * Init Memory Controller:
@@ -287,20 +287,20 @@
  * restrict access enough to keep SRAM working (if any)
  * but not too much to meddle with FLASH accesses
  */
-#define CFG_REMAP_OR_AM		0x80000000	/* OR addr mask */
-#define CFG_PRELIM_OR_AM	0xE0000000	/* OR addr mask */
+#define CONFIG_SYS_REMAP_OR_AM		0x80000000	/* OR addr mask */
+#define CONFIG_SYS_PRELIM_OR_AM	0xE0000000	/* OR addr mask */
 
 /* FLASH timing */
-#define CFG_OR_TIMING_FLASH     (OR_CSNT_SAM  | OR_BI | \
+#define CONFIG_SYS_OR_TIMING_FLASH     (OR_CSNT_SAM  | OR_BI | \
 				 OR_SCY_5_CLK | OR_TRLX)
 
-#define CFG_OR0_REMAP	(CFG_REMAP_OR_AM  | CFG_OR_TIMING_FLASH)
-#define CFG_OR0_PRELIM	(CFG_PRELIM_OR_AM | CFG_OR_TIMING_FLASH)
-#define CFG_BR0_PRELIM	((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_V )
+#define CONFIG_SYS_OR0_REMAP	(CONFIG_SYS_REMAP_OR_AM  | CONFIG_SYS_OR_TIMING_FLASH)
+#define CONFIG_SYS_OR0_PRELIM	(CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_FLASH)
+#define CONFIG_SYS_BR0_PRELIM	((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_V )
 
-#define CFG_OR5_REMAP   CFG_OR0_REMAP
-#define CFG_OR5_PRELIM  CFG_OR0_PRELIM
-#define CFG_BR5_PRELIM  ((FLASH_BASE5_PRELIM & BR_BA_MSK) | BR_V )
+#define CONFIG_SYS_OR5_REMAP   CONFIG_SYS_OR0_REMAP
+#define CONFIG_SYS_OR5_PRELIM  CONFIG_SYS_OR0_PRELIM
+#define CONFIG_SYS_BR5_PRELIM  ((FLASH_BASE5_PRELIM & BR_BA_MSK) | BR_V )
 
 /*
  * BR2/3 and OR2/3 (SDRAM)
@@ -310,32 +310,32 @@
 #define SDRAM_MAX_SIZE          0x04000000      /* max 64 MB per bank   */
 
 /* SDRAM timing: Multiplexed addresses					*/
-#define CFG_OR_TIMING_SDRAM     (OR_CSNT_SAM)
+#define CONFIG_SYS_OR_TIMING_SDRAM     (OR_CSNT_SAM)
 
-#define CFG_OR3_PRELIM  (CFG_PRELIM_OR_AM | CFG_OR_TIMING_SDRAM )
-#define CFG_BR3_PRELIM  ((SDRAM_BASE3_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
+#define CONFIG_SYS_OR3_PRELIM  (CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_SDRAM )
+#define CONFIG_SYS_BR3_PRELIM  ((SDRAM_BASE3_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
 
 /*
  * Memory Periodic Timer Prescaler
  */
 
 /* refresh rate 15.6 us (= 64 ms / 4K = 62.4 / quad bursts) for <= 128 MBit	*/
-#define CFG_MPTPR_2BK_4K	MPTPR_PTP_DIV16		/* setting for 2 banks	*/
-#define CFG_MPTPR_1BK_4K	MPTPR_PTP_DIV32		/* setting for 1 bank	*/
+#define CONFIG_SYS_MPTPR_2BK_4K	MPTPR_PTP_DIV16		/* setting for 2 banks	*/
+#define CONFIG_SYS_MPTPR_1BK_4K	MPTPR_PTP_DIV32		/* setting for 1 bank	*/
 
 /* refresh rate 7.8 us (= 64 ms / 8K = 31.2 / quad bursts) for 256 MBit		*/
-#define CFG_MPTPR_2BK_8K	MPTPR_PTP_DIV8		/* setting for 2 banks	*/
-#define CFG_MPTPR_1BK_8K	MPTPR_PTP_DIV16		/* setting for 1 bank	*/
+#define CONFIG_SYS_MPTPR_2BK_8K	MPTPR_PTP_DIV8		/* setting for 2 banks	*/
+#define CONFIG_SYS_MPTPR_1BK_8K	MPTPR_PTP_DIV16		/* setting for 1 bank	*/
 
 /*
  * MAMR settings for SDRAM
  */
 /* periodic timer for refresh */
-#define CFG_MAMR_PTA	97		/* start with divider for 100 MHz	*/
+#define CONFIG_SYS_MAMR_PTA	97		/* start with divider for 100 MHz	*/
 
 /* 8 column SDRAM */
-#define CFG_MAMR_8COL \
-			((CFG_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE      |	\
+#define CONFIG_SYS_MAMR_8COL \
+			((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE      |	\
 			 MAMR_AMA_TYPE_0 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A11 |	\
 			 MAMR_RLFA_1X    | MAMR_WLFA_1X    | MAMR_TLFA_4X)
 
diff --git a/include/configs/M52277EVB.h b/include/configs/M52277EVB.h
index 8713b02aa..5d5966fc0 100644
--- a/include/configs/M52277EVB.h
+++ b/include/configs/M52277EVB.h
@@ -39,9 +39,9 @@
 #define CONFIG_M52277EVB	/* M52277EVB board */
 
 #define CONFIG_MCFUART
-#define CFG_UART_PORT		(0)
-#define CONFIG_BAUDRATE		115200
-#define CFG_BAUDRATE_TABLE	{ 9600 , 19200 , 38400 , 57600, 115200 }
+#define CONFIG_SYS_UART_PORT		(0)
+#define CONFIG_BAUDRATE			115200
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600 , 19200 , 38400 , 57600, 115200 }
 
 #undef CONFIG_WATCHDOG
 
@@ -72,21 +72,50 @@
 #define CONFIG_CMD_REGINFO
 #undef CONFIG_CMD_USB
 #undef CONFIG_CMD_BMP
-
-#define CONFIG_HOSTNAME		M52277EVB
+#define CONFIG_CMD_SPI
+#define CONFIG_CMD_SF
+
+#define CONFIG_HOSTNAME			M52277EVB
+#define CONFIG_SYS_UBOOT_END		0x3FFFF
+#define	CONFIG_SYS_LOAD_ADDR2		0x40010007
+#ifdef CONFIG_SYS_STMICRO_BOOT
+/* ST Micro serial flash */
 #define CONFIG_EXTRA_ENV_SETTINGS		\
-	"inpclk=" MK_STR(CFG_INPUT_CLKSRC) "\0"	\
-	"loadaddr=" MK_STR(CFG_LOAD_ADDR) "\0"	\
-	"u-boot=u-boot.bin\0"			\
-	"load=tftp ${loadaddr) ${u-boot}\0"	\
+	"inpclk=" MK_STR(CONFIG_SYS_INPUT_CLKSRC) "\0"	\
+	"loadaddr=0x40010000\0"			\
+	"uboot=u-boot.bin\0"			\
+	"load=loadb ${loadaddr} ${baudrate};"	\
+	"loadb " MK_STR(CONFIG_SYS_LOAD_ADDR2) " ${baudrate} \0"	\
 	"upd=run load; run prog\0"		\
-	"prog=prot off 0 0x3ffff;"		\
-	"era 0 3ffff;"				\
-	"cp.b ${loadaddr} 0 ${filesize};"	\
+	"prog=sf probe 0:2 10000 1;"		\
+	"sf erase 0 30000;"			\
+	"sf write ${loadaddr} 0 30000;"		\
 	"save\0"				\
 	""
+#endif
+#ifdef CONFIG_SYS_SPANSION_BOOT
+#define CONFIG_EXTRA_ENV_SETTINGS		\
+	"inpclk=" MK_STR(CONFIG_SYS_INPUT_CLKSRC) "\0"	\
+	"loadaddr=0x40010000\0"			\
+	"uboot=u-boot.bin\0"			\
+	"load=loadb ${loadaddr} ${baudrate}\0"	\
+	"upd=run load; run prog\0"		\
+	"prog=prot off " MK_STR(CONFIG_SYS_FLASH_BASE)	\
+	" " MK_STR(CONFIG_SYS_UBOOT_END) ";"		\
+	"era " MK_STR(CONFIG_SYS_FLASH_BASE) " "	\
+	MK_STR(CONFIG_SYS_UBOOT_END) ";"		\
+	"cp.b ${loadaddr} " MK_STR(CONFIG_SYS_FLASH_BASE)	\
+	" ${filesize}; save\0"			\
+	"updsbf=run loadsbf; run progsbf\0"	\
+	"loadsbf=loadb ${loadaddr} ${baudrate};"	\
+	"loadb " MK_STR(CONFIG_SYS_LOAD_ADDR2) " ${baudrate} \0"	\
+	"progsbf=sf probe 0:2 10000 1;"		\
+	"sf erase 0 30000;"			\
+	"sf write ${loadaddr} 0 30000;"		\
+	""
+#endif
 
-#define CONFIG_BOOTDELAY	3	/* autoboot after 3 seconds */
+#define CONFIG_BOOTDELAY		3	/* autoboot after 3 seconds */
 /* LCD */
 #ifdef CONFIG_CMD_BMP
 #define CONFIG_LCD
@@ -102,14 +131,14 @@
 #define CONFIG_DOS_PARTITION
 #define CONFIG_MAC_PARTITION
 #define CONFIG_ISO_PARTITION
-#define CFG_USB_EHCI_REGS_BASE		0xFC0B0000
-#define CFG_USB_EHCI_CPU_INIT
+#define CONFIG_SYS_USB_EHCI_REGS_BASE	0xFC0B0000
+#define CONFIG_SYS_USB_EHCI_CPU_INIT
 #endif
 
 /* Realtime clock */
 #define CONFIG_MCFRTC
 #undef RTC_DEBUG
-#define CFG_RTC_OSCILLATOR	(32 * CFG_HZ)
+#define CONFIG_SYS_RTC_OSCILLATOR	(32 * CONFIG_SYS_HZ)
 
 /* Timer */
 #define CONFIG_MCFTMR
@@ -119,35 +148,58 @@
 #define CONFIG_FSL_I2C
 #define CONFIG_HARD_I2C		/* I2C with hardware support */
 #undef	CONFIG_SOFT_I2C		/* I2C bit-banged               */
-#define CFG_I2C_SPEED		80000	/* I2C speed and slave address  */
-#define CFG_I2C_SLAVE		0x7F
-#define CFG_I2C_OFFSET		0x58000
-#define CFG_IMMR		CFG_MBAR
+#define CONFIG_SYS_I2C_SPEED		80000	/* I2C speed and slave address  */
+#define CONFIG_SYS_I2C_SLAVE		0x7F
+#define CONFIG_SYS_I2C_OFFSET		0x58000
+#define CONFIG_SYS_IMMR			CONFIG_SYS_MBAR
+
+/* DSPI and Serial Flash */
+#define CONFIG_CF_DSPI
+#define CONFIG_HARD_SPI
+#define CONFIG_SYS_SER_FLASH_BASE	0x01000000
+#define CONFIG_SYS_SBFHDR_SIZE		0x7
+#ifdef CONFIG_CMD_SPI
+#	define CONFIG_SYS_DSPI_CS2
+#	define CONFIG_SPI_FLASH
+#	define CONFIG_SPI_FLASH_STMICRO
+
+#	define CONFIG_SYS_DSPI_DCTAR0	(DSPI_DCTAR_TRSZ(7) | \
+					 DSPI_DCTAR_CPOL | \
+					 DSPI_DCTAR_CPHA | \
+					 DSPI_DCTAR_PCSSCK_1CLK | \
+					 DSPI_DCTAR_PASC(0) | \
+					 DSPI_DCTAR_PDT(0) | \
+					 DSPI_DCTAR_CSSCK(0) | \
+					 DSPI_DCTAR_ASC(0) | \
+					 DSPI_DCTAR_PBR(0) | \
+					 DSPI_DCTAR_DT(1) | \
+					 DSPI_DCTAR_BR(1))
+#endif
 
 /* Input, PCI, Flexbus, and VCO */
 #define CONFIG_EXTRA_CLOCK
 
-#define CFG_INPUT_CLKSRC	16000000
+#define CONFIG_SYS_INPUT_CLKSRC	16000000
 
-#define CONFIG_PRAM		512	/* 512 KB */
+#define CONFIG_PRAM		2048	/* 2048 KB */
 
-#define CFG_PROMPT		"-> "
-#define CFG_LONGHELP		/* undef to save memory */
+#define CONFIG_SYS_PROMPT	"-> "
+#define CONFIG_SYS_LONGHELP		/* undef to save memory */
 
 #if defined(CONFIG_CMD_KGDB)
-#define CFG_CBSIZE		1024	/* Console I/O Buffer Size */
+#define CONFIG_SYS_CBSIZE	1024	/* Console I/O Buffer Size */
 #else
-#define CFG_CBSIZE		256	/* Console I/O Buffer Size */
+#define CONFIG_SYS_CBSIZE	256	/* Console I/O Buffer Size */
 #endif
-#define CFG_PBSIZE		(CFG_CBSIZE+sizeof(CFG_PROMPT)+16)	/* Print Buffer Size */
-#define CFG_MAXARGS		16	/* max number of command args */
-#define CFG_BARGSIZE		CFG_CBSIZE	/* Boot Argument Buffer Size    */
+#define CONFIG_SYS_PBSIZE	(CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)	/* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS	16	/* max number of command args */
+#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size    */
 
-#define CFG_LOAD_ADDR		(CFG_SDRAM_BASE + 0x10000)
+#define CONFIG_SYS_LOAD_ADDR	(CONFIG_SYS_SDRAM_BASE + 0x10000)
 
-#define CFG_HZ			1000
+#define CONFIG_SYS_HZ		1000
 
-#define CFG_MBAR		0xFC000000
+#define CONFIG_SYS_MBAR		0xFC000000
 
 /*
  * Low Level Configuration Settings
@@ -155,65 +207,88 @@
  * You should know what you are doing if you make changes here.
  */
 
-/*-----------------------------------------------------------------------
+/*
  * Definitions for initial stack pointer and data area (in DPRAM)
  */
-#define CFG_INIT_RAM_ADDR	0x80000000
-#define CFG_INIT_RAM_END	0x8000	/* End of used area in internal SRAM */
-#define CFG_INIT_RAM_CTRL	0x21
-#define CFG_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
-#define CFG_GBL_DATA_OFFSET	((CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) - 16)
-#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_INIT_RAM_ADDR	0x80000000
+#define CONFIG_SYS_INIT_RAM_END		0x8000	/* End of used area in internal SRAM */
+#define CONFIG_SYS_INIT_RAM_CTRL	0x221
+#define CONFIG_SYS_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET	((CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) - 32)
+#define CONFIG_SYS_INIT_SP_OFFSET	(CONFIG_SYS_GBL_DATA_OFFSET - 32)
+#define CONFIG_SYS_SBFHDR_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - 32)
 
-/*-----------------------------------------------------------------------
+/*
  * Start addresses for the final memory configuration
  * (Set up by the startup code)
- * Please note that CFG_SDRAM_BASE _must_ start at 0
+ * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
  */
-#define CFG_SDRAM_BASE		0x40000000
-#define CFG_SDRAM_SIZE		64	/* SDRAM size in MB */
-#define CFG_SDRAM_CFG1		0x43711630
-#define CFG_SDRAM_CFG2		0x56670000
-#define CFG_SDRAM_CTRL		0xE1092000
-#define CFG_SDRAM_EMOD		0x81810000
-#define CFG_SDRAM_MODE		0x00CD0000
-
-#define CFG_MEMTEST_START	CFG_SDRAM_BASE + 0x400
-#define CFG_MEMTEST_END		((CFG_SDRAM_SIZE - 3) << 20)
-
-#define CFG_MONITOR_BASE	(CFG_FLASH_BASE + 0x400)
-#define CFG_BOOTPARAMS_LEN	64*1024
-#define CFG_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor */
-#define CFG_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc() */
+#define CONFIG_SYS_SDRAM_BASE		0x40000000
+#define CONFIG_SYS_SDRAM_SIZE		64	/* SDRAM size in MB */
+#define CONFIG_SYS_SDRAM_CFG1		0x43711630
+#define CONFIG_SYS_SDRAM_CFG2		0x56670000
+#define CONFIG_SYS_SDRAM_CTRL		0xE1092000
+#define CONFIG_SYS_SDRAM_EMOD		0x81810000
+#define CONFIG_SYS_SDRAM_MODE		0x00CD0000
+#define CONFIG_SYS_SDRAM_DRV_STRENGTH	0x00
+
+#define CONFIG_SYS_MEMTEST_START	CONFIG_SYS_SDRAM_BASE + 0x400
+#define CONFIG_SYS_MEMTEST_END		((CONFIG_SYS_SDRAM_SIZE - 3) << 20)
+
+#ifdef CONFIG_CF_SBF
+#	define CONFIG_SYS_MONITOR_BASE	(TEXT_BASE + 0x400)
+#else
+#	define CONFIG_SYS_MONITOR_BASE	(CONFIG_SYS_FLASH_BASE + 0x400)
+#endif
+#define CONFIG_SYS_BOOTPARAMS_LEN	64*1024
+#define CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor */
+#define CONFIG_SYS_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc() */
 
 /* Initial Memory map for Linux */
-#define CFG_BOOTMAPSZ		(CFG_SDRAM_BASE + (CFG_SDRAM_SIZE << 20))
+#define CONFIG_SYS_BOOTMAPSZ		(CONFIG_SYS_SDRAM_BASE + (CONFIG_SYS_SDRAM_SIZE << 20))
 
-/* Configuration for environment
+/*
+ * Configuration for environment
  * Environment is embedded in u-boot in the second sector of the flash
  */
-#define CFG_ENV_IS_IN_FLASH	1
-#define CONFIG_ENV_OVERWRITE	1
-#undef CFG_ENV_IS_EMBEDDED
+#ifdef CONFIG_CF_SBF
+#	define CONFIG_ENV_IS_IN_SPI_FLASH
+#	define CONFIG_ENV_SPI_CS	2
+#else
+#	define CONFIG_ENV_IS_IN_FLASH	1
+#endif
+#define CONFIG_ENV_OVERWRITE		1
+#undef CONFIG_ENV_IS_EMBEDDED
 
 /*-----------------------------------------------------------------------
  * FLASH organization
  */
-#define CFG_FLASH_BASE		CFG_CS0_BASE
-#define CFG_FLASH0_BASE		CFG_CS0_BASE
-#define CFG_ENV_ADDR		(CFG_FLASH_BASE + 0x8000)
-#define CFG_ENV_SECT_SIZE	0x8000
-
-#define CFG_FLASH_CFI
-#ifdef CFG_FLASH_CFI
+#ifdef CONFIG_SYS_STMICRO_BOOT
+#	define CONFIG_SYS_FLASH_BASE	CONFIG_SYS_SER_FLASH_BASE
+#	define CONFIG_SYS_FLASH0_BASE	CONFIG_SYS_SER_FLASH_BASE
+#	define CONFIG_SYS_FLASH1_BASE	CONFIG_SYS_CS0_BASE
+#	define CONFIG_ENV_OFFSET	0x30000
+#	define CONFIG_ENV_SIZE		0x1000
+#	define CONFIG_ENV_SECT_SIZE	0x10000
+#endif
+#ifdef CONFIG_SYS_SPANSION_BOOT
+#	define CONFIG_SYS_FLASH_BASE	CONFIG_SYS_CS0_BASE
+#	define CONFIG_SYS_FLASH0_BASE	CONFIG_SYS_CS0_BASE
+#	define CONFIG_ENV_ADDR		(CONFIG_SYS_FLASH_BASE + 0x8000)
+#	define CONFIG_ENV_SIZE		0x1000
+#	define CONFIG_ENV_SECT_SIZE	0x8000
+#endif
 
+#define CONFIG_SYS_FLASH_CFI
+#ifdef CONFIG_SYS_FLASH_CFI
 #	define CONFIG_FLASH_CFI_DRIVER	1
-#	define CFG_FLASH_SIZE		0x1000000	/* Max size that the board might have */
-#	define CFG_FLASH_CFI_WIDTH	FLASH_CFI_16BIT
-#	define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks */
-#	define CFG_MAX_FLASH_SECT	137	/* max number of sectors on one chip */
-#	define CFG_FLASH_PROTECTION	/* "Real" (hardware) sectors protection */
-#	define CFG_FLASH_CHECKSUM
+#	define CONFIG_SYS_FLASH_SIZE		0x1000000	/* Max size that the board might have */
+#	define CONFIG_SYS_FLASH_CFI_WIDTH	FLASH_CFI_16BIT
+#	define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks */
+#	define CONFIG_SYS_MAX_FLASH_SECT	137	/* max number of sectors on one chip */
+#	define CONFIG_SYS_FLASH_PROTECTION	/* "Real" (hardware) sectors protection */
+#	define CONFIG_SYS_FLASH_CHECKSUM
+#	define CONFIG_SYS_FLASH_BANKS_LIST	{ CONFIG_SYS_CS0_BASE }
 #endif
 
 /*
@@ -223,13 +298,13 @@
 #ifdef CONFIG_CMD_JFFS2
 #	define CONFIG_JFFS2_DEV		"nor0"
 #	define CONFIG_JFFS2_PART_SIZE	(0x01000000 - 0x40000)
-#	define CONFIG_JFFS2_PART_OFFSET	(CFG_FLASH0_BASE + 0x40000)
+#	define CONFIG_JFFS2_PART_OFFSET	(CONFIG_SYS_FLASH0_BASE + 0x40000)
 #endif
 
 /*-----------------------------------------------------------------------
  * Cache Configuration
  */
-#define CFG_CACHELINE_SIZE		16
+#define CONFIG_SYS_CACHELINE_SIZE	16
 
 /*-----------------------------------------------------------------------
  * Memory bank definitions
@@ -243,8 +318,14 @@
  * CS5 - Available
  */
 
-#define CFG_CS0_BASE		0x00000000
-#define CFG_CS0_MASK		0x00FF0001
-#define CFG_CS0_CTRL		0x00001FA0
+#ifdef CONFIG_CF_SBF
+#define CONFIG_SYS_CS0_BASE		0x04000000
+#define CONFIG_SYS_CS0_MASK		0x00FF0001
+#define CONFIG_SYS_CS0_CTRL		0x00001FA0
+#else
+#define CONFIG_SYS_CS0_BASE		0x00000000
+#define CONFIG_SYS_CS0_MASK		0x00FF0001
+#define CONFIG_SYS_CS0_CTRL		0x00001FA0
+#endif
 
 #endif				/* _M52277EVB_H */
diff --git a/include/configs/M5235EVB.h b/include/configs/M5235EVB.h
index b32eabe9a..8c66f879e 100644
--- a/include/configs/M5235EVB.h
+++ b/include/configs/M5235EVB.h
@@ -38,9 +38,9 @@
 #define CONFIG_M5235		/* define processor type */
 
 #define CONFIG_MCFUART
-#define CFG_UART_PORT		(0)
+#define CONFIG_SYS_UART_PORT		(0)
 #define CONFIG_BAUDRATE		115200
-#define CFG_BAUDRATE_TABLE	{ 9600 , 19200 , 38400 , 57600, 115200 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600 , 19200 , 38400 , 57600, 115200 }
 
 #undef CONFIG_WATCHDOG
 #define CONFIG_WATCHDOG_TIMEOUT	5000	/* timeout in milliseconds, max timeout is 6.71sec */
@@ -78,22 +78,22 @@
 #	define CONFIG_NET_MULTI		1
 #	define CONFIG_MII		1
 #	define CONFIG_MII_INIT		1
-#	define CFG_DISCOVER_PHY
-#	define CFG_RX_ETH_BUFFER	8
-#	define CFG_FAULT_ECHO_LINK_DOWN
+#	define CONFIG_SYS_DISCOVER_PHY
+#	define CONFIG_SYS_RX_ETH_BUFFER	8
+#	define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
 
-#	define CFG_FEC0_PINMUX		0
-#	define CFG_FEC0_MIIBASE		CFG_FEC0_IOBASE
+#	define CONFIG_SYS_FEC0_PINMUX		0
+#	define CONFIG_SYS_FEC0_MIIBASE		CONFIG_SYS_FEC0_IOBASE
 #	define MCFFEC_TOUT_LOOP		50000
-/* If CFG_DISCOVER_PHY is not defined - hardcoded */
-#	ifndef CFG_DISCOVER_PHY
+/* If CONFIG_SYS_DISCOVER_PHY is not defined - hardcoded */
+#	ifndef CONFIG_SYS_DISCOVER_PHY
 #		define FECDUPLEX	FULL
 #		define FECSPEED		_100BASET
 #	else
-#		ifndef CFG_FAULT_ECHO_LINK_DOWN
-#			define CFG_FAULT_ECHO_LINK_DOWN
+#		ifndef CONFIG_SYS_FAULT_ECHO_LINK_DOWN
+#			define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
 #		endif
-#	endif			/* CFG_DISCOVER_PHY */
+#	endif			/* CONFIG_SYS_DISCOVER_PHY */
 #endif
 
 /* Timer */
@@ -104,13 +104,13 @@
 #define CONFIG_FSL_I2C
 #define CONFIG_HARD_I2C		/* I2C with hw support */
 #undef CONFIG_SOFT_I2C		/* I2C bit-banged */
-#define CFG_I2C_SPEED		80000
-#define CFG_I2C_SLAVE		0x7F
-#define CFG_I2C_OFFSET		0x00000300
-#define CFG_IMMR		CFG_MBAR
-#define CFG_I2C_PINMUX_REG	(gpio->par_qspi)
-#define CFG_I2C_PINMUX_CLR	~(GPIO_PAR_FECI2C_SCL_MASK | GPIO_PAR_FECI2C_SDA_MASK)
-#define CFG_I2C_PINMUX_SET	(GPIO_PAR_FECI2C_SCL_I2CSCL | GPIO_PAR_FECI2C_SDA_I2CSDA)
+#define CONFIG_SYS_I2C_SPEED		80000
+#define CONFIG_SYS_I2C_SLAVE		0x7F
+#define CONFIG_SYS_I2C_OFFSET		0x00000300
+#define CONFIG_SYS_IMMR		CONFIG_SYS_MBAR
+#define CONFIG_SYS_I2C_PINMUX_REG	(gpio->par_qspi)
+#define CONFIG_SYS_I2C_PINMUX_CLR	~(GPIO_PAR_FECI2C_SCL_MASK | GPIO_PAR_FECI2C_SDA_MASK)
+#define CONFIG_SYS_I2C_PINMUX_SET	(GPIO_PAR_FECI2C_SCL_I2CSCL | GPIO_PAR_FECI2C_SDA_I2CSDA)
 
 /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
 #define CONFIG_BOOTDELAY	1	/* autoboot after 5 seconds */
@@ -138,25 +138,25 @@
 	""
 
 #define CONFIG_PRAM		512	/* 512 KB */
-#define CFG_PROMPT		"-> "
-#define CFG_LONGHELP		/* undef to save memory */
+#define CONFIG_SYS_PROMPT		"-> "
+#define CONFIG_SYS_LONGHELP		/* undef to save memory */
 
 #if defined(CONFIG_KGDB)
-#	define CFG_CBSIZE		1024	/* Console I/O Buffer Size */
+#	define CONFIG_SYS_CBSIZE		1024	/* Console I/O Buffer Size */
 #else
-#	define CFG_CBSIZE		256	/* Console I/O Buffer Size */
+#	define CONFIG_SYS_CBSIZE		256	/* Console I/O Buffer Size */
 #endif
 
-#define CFG_PBSIZE		(CFG_CBSIZE+sizeof(CFG_PROMPT)+16)	/* Print Buffer Size */
-#define CFG_MAXARGS		16	/* max number of command args */
-#define CFG_BARGSIZE		CFG_CBSIZE	/* Boot Argument Buffer Size    */
-#define CFG_LOAD_ADDR		(CFG_SDRAM_BASE+0x20000)
+#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)	/* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS		16	/* max number of command args */
+#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size    */
+#define CONFIG_SYS_LOAD_ADDR		(CONFIG_SYS_SDRAM_BASE+0x20000)
 
-#define CFG_HZ			1000
-#define CFG_CLK			75000000
-#define CFG_CPU_CLK		CFG_CLK * 2
+#define CONFIG_SYS_HZ			1000
+#define CONFIG_SYS_CLK			75000000
+#define CONFIG_SYS_CPU_CLK		CONFIG_SYS_CLK * 2
 
-#define CFG_MBAR		0x40000000
+#define CONFIG_SYS_MBAR		0x40000000
 
 /*
  * Low Level Configuration Settings
@@ -166,29 +166,29 @@
 /*-----------------------------------------------------------------------
  * Definitions for initial stack pointer and data area (in DPRAM)
  */
-#define CFG_INIT_RAM_ADDR	0x20000000
-#define CFG_INIT_RAM_END	0x10000	/* End of used area in internal SRAM */
-#define CFG_INIT_RAM_CTRL	0x21
-#define CFG_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE - 0x10)
-#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_INIT_RAM_ADDR	0x20000000
+#define CONFIG_SYS_INIT_RAM_END	0x10000	/* End of used area in internal SRAM */
+#define CONFIG_SYS_INIT_RAM_CTRL	0x21
+#define CONFIG_SYS_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE - 0x10)
+#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
 /*-----------------------------------------------------------------------
  * Start addresses for the final memory configuration
  * (Set up by the startup code)
- * Please note that CFG_SDRAM_BASE _must_ start at 0
+ * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
  */
-#define CFG_SDRAM_BASE		0x00000000
-#define CFG_SDRAM_SIZE		16	/* SDRAM size in MB */
+#define CONFIG_SYS_SDRAM_BASE		0x00000000
+#define CONFIG_SYS_SDRAM_SIZE		16	/* SDRAM size in MB */
 
-#define CFG_MEMTEST_START	CFG_SDRAM_BASE + 0x400
-#define CFG_MEMTEST_END		((CFG_SDRAM_SIZE - 3) << 20)
+#define CONFIG_SYS_MEMTEST_START	CONFIG_SYS_SDRAM_BASE + 0x400
+#define CONFIG_SYS_MEMTEST_END		((CONFIG_SYS_SDRAM_SIZE - 3) << 20)
 
-#define CFG_MONITOR_BASE	(CFG_FLASH_BASE + 0x400)
-#define CFG_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor */
+#define CONFIG_SYS_MONITOR_BASE	(CONFIG_SYS_FLASH_BASE + 0x400)
+#define CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor */
 
-#define CFG_BOOTPARAMS_LEN	64*1024
-#define CFG_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc() */
+#define CONFIG_SYS_BOOTPARAMS_LEN	64*1024
+#define CONFIG_SYS_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc() */
 
 /*
  * For booting Linux, the board info and command line data
@@ -196,46 +196,46 @@
  * the maximum mapped by the Linux kernel during initialization ??
  */
 /* Initial Memory map for Linux */
-#define CFG_BOOTMAPSZ		(CFG_SDRAM_BASE + (CFG_SDRAM_SIZE << 20))
+#define CONFIG_SYS_BOOTMAPSZ		(CONFIG_SYS_SDRAM_BASE + (CONFIG_SYS_SDRAM_SIZE << 20))
 
 /*-----------------------------------------------------------------------
  * FLASH organization
  */
-#define CFG_FLASH_CFI
-#ifdef CFG_FLASH_CFI
+#define CONFIG_SYS_FLASH_CFI
+#ifdef CONFIG_SYS_FLASH_CFI
 #	define CONFIG_FLASH_CFI_DRIVER	1
-#	define CFG_FLASH_SIZE		0x800000	/* Max size that the board might have */
+#	define CONFIG_SYS_FLASH_SIZE		0x800000	/* Max size that the board might have */
 #ifdef NORFLASH_PS32BIT
-#	define CFG_FLASH_CFI_WIDTH	FLASH_CFI_32BIT
+#	define CONFIG_SYS_FLASH_CFI_WIDTH	FLASH_CFI_32BIT
 #else
-#	define CFG_FLASH_CFI_WIDTH	FLASH_CFI_16BIT
+#	define CONFIG_SYS_FLASH_CFI_WIDTH	FLASH_CFI_16BIT
 #endif
-#	define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks */
-#	define CFG_MAX_FLASH_SECT	137	/* max number of sectors on one chip */
-#	define CFG_FLASH_PROTECTION	/* "Real" (hardware) sectors protection */
+#	define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks */
+#	define CONFIG_SYS_MAX_FLASH_SECT	137	/* max number of sectors on one chip */
+#	define CONFIG_SYS_FLASH_PROTECTION	/* "Real" (hardware) sectors protection */
 #endif
 
-#define CFG_FLASH_BASE		(CFG_CS0_BASE << 16)
+#define CONFIG_SYS_FLASH_BASE		(CONFIG_SYS_CS0_BASE)
 
 /* Configuration for environment
  * Environment is embedded in u-boot in the second sector of the flash
  */
-#define CFG_ENV_IS_IN_FLASH	1
-#define CFG_ENV_IS_EMBEDDED	1
+#define CONFIG_ENV_IS_IN_FLASH	1
+#define CONFIG_ENV_IS_EMBEDDED	1
 #ifdef NORFLASH_PS32BIT
-#	define CFG_ENV_OFFSET		(0x8000)
-#	define CFG_ENV_SIZE		0x4000
-#	define CFG_ENV_SECT_SIZE	0x4000
+#	define CONFIG_ENV_OFFSET		(0x8000)
+#	define CONFIG_ENV_SIZE		0x4000
+#	define CONFIG_ENV_SECT_SIZE	0x4000
 #else
-#	define CFG_ENV_OFFSET		(0x4000)
-#	define CFG_ENV_SIZE		0x2000
-#	define CFG_ENV_SECT_SIZE	0x2000
+#	define CONFIG_ENV_OFFSET		(0x4000)
+#	define CONFIG_ENV_SIZE		0x2000
+#	define CONFIG_ENV_SECT_SIZE	0x2000
 #endif
 
 /*-----------------------------------------------------------------------
  * Cache Configuration
  */
-#define CFG_CACHELINE_SIZE	16
+#define CONFIG_SYS_CACHELINE_SIZE	16
 
 /*-----------------------------------------------------------------------
  * Chipselect bank definitions
@@ -251,13 +251,13 @@
  * CS7 - Available
  */
 #ifdef NORFLASH_PS32BIT
-#	define CFG_CS0_BASE	0xFFC0
-#	define CFG_CS0_MASK	0x003f0001
-#	define CFG_CS0_CTRL	0x1D00
+#	define CONFIG_SYS_CS0_BASE	0xFFC00000
+#	define CONFIG_SYS_CS0_MASK	0x003f0001
+#	define CONFIG_SYS_CS0_CTRL	0x00001D00
 #else
-#	define CFG_CS0_BASE	0xFFE0
-#	define CFG_CS0_MASK	0x001f0001
-#	define CFG_CS0_CTRL	0x1D80
+#	define CONFIG_SYS_CS0_BASE	0xFFE00000
+#	define CONFIG_SYS_CS0_MASK	0x001f0001
+#	define CONFIG_SYS_CS0_CTRL	0x00001D80
 #endif
 
 #endif				/* _M5329EVB_H */
diff --git a/include/configs/M5249EVB.h b/include/configs/M5249EVB.h
index 6bf2d99c9..e3830e536 100644
--- a/include/configs/M5249EVB.h
+++ b/include/configs/M5249EVB.h
@@ -40,9 +40,9 @@
 #define CONFIG_MCFTMR
 
 #define CONFIG_MCFUART
-#define CFG_UART_PORT		(0)
+#define CONFIG_SYS_UART_PORT		(0)
 #define CONFIG_BAUDRATE		115200
-#define CFG_BAUDRATE_TABLE	{ 9600 , 19200 , 38400 , 57600, 115200 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600 , 19200 , 38400 , 57600, 115200 }
 
 #undef  CONFIG_WATCHDOG
 
@@ -62,38 +62,38 @@
 #include <config_cmd_default.h>
 #undef CONFIG_CMD_NET
 
-#define CFG_PROMPT		"=> "
-#define CFG_LONGHELP				/* undef to save memory		*/
+#define CONFIG_SYS_PROMPT		"=> "
+#define CONFIG_SYS_LONGHELP				/* undef to save memory		*/
 
 #if defined(CONFIG_CMD_KGDB)
-#define CFG_CBSIZE		1024		/* Console I/O Buffer Size	*/
+#define CONFIG_SYS_CBSIZE		1024		/* Console I/O Buffer Size	*/
 #else
-#define CFG_CBSIZE		256		/* Console I/O Buffer Size	*/
+#define CONFIG_SYS_CBSIZE		256		/* Console I/O Buffer Size	*/
 #endif
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define CFG_MAXARGS		16		/* max number of command args	*/
-#define CFG_BARGSIZE		CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS		16		/* max number of command args	*/
+#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
 
-#define CFG_DEVICE_NULLDEV	1	/* include nulldev device	*/
-#define CFG_CONSOLE_INFO_QUIET	1	/* don't print console @ startup	*/
+#define CONFIG_SYS_DEVICE_NULLDEV	1	/* include nulldev device	*/
+#define CONFIG_SYS_CONSOLE_INFO_QUIET	1	/* don't print console @ startup	*/
 #define CONFIG_AUTO_COMPLETE	1	/* add autocompletion support	*/
 #define CONFIG_LOOPW		1	/* enable loopw command	*/
 #define CONFIG_MX_CYCLIC	1	/* enable mdc/mwc commands	*/
 
-#define CFG_LOAD_ADDR		0x200000	/* default load address */
+#define CONFIG_SYS_LOAD_ADDR		0x200000	/* default load address */
 
-#define CFG_MEMTEST_START	0x400
-#define CFG_MEMTEST_END		0x380000
+#define CONFIG_SYS_MEMTEST_START	0x400
+#define CONFIG_SYS_MEMTEST_END		0x380000
 
-#define CFG_HZ			1000
+#define CONFIG_SYS_HZ			1000
 
 /*
  * Clock configuration: enable only one of the following options
  */
 
-#undef  CFG_PLL_BYPASS				/* bypass PLL for test purpose */
-#define CFG_FAST_CLK		1		/* MCF5249 can run at 140MHz   */
-#define	CFG_CLK			132025600	/* MCF5249 can run at 140MHz   */
+#undef  CONFIG_SYS_PLL_BYPASS				/* bypass PLL for test purpose */
+#define CONFIG_SYS_FAST_CLK		1		/* MCF5249 can run at 140MHz   */
+#define	CONFIG_SYS_CLK			132025600	/* MCF5249 can run at 140MHz   */
 
 /*
  * Low Level Configuration Settings
@@ -101,94 +101,94 @@
  * You should know what you are doing if you make changes here.
  */
 
-#define CFG_MBAR		0x10000000	/* Register Base Addrs */
-#define	CFG_MBAR2		0x80000000
+#define CONFIG_SYS_MBAR		0x10000000	/* Register Base Addrs */
+#define	CONFIG_SYS_MBAR2		0x80000000
 
 /*-----------------------------------------------------------------------
  * Definitions for initial stack pointer and data area (in DPRAM)
  */
-#define CFG_INIT_RAM_ADDR	0x20000000
-#define CFG_INIT_RAM_END	0x1000	/* End of used area in internal SRAM	*/
-#define CFG_GBL_DATA_SIZE	64	/* size in bytes reserved for initial data */
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_INIT_RAM_ADDR	0x20000000
+#define CONFIG_SYS_INIT_RAM_END	0x1000	/* End of used area in internal SRAM	*/
+#define CONFIG_SYS_GBL_DATA_SIZE	64	/* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
-#define CFG_ENV_IS_IN_FLASH	1
-#define CFG_ENV_OFFSET		0x4000	/* Address of Environment Sector*/
-#define CFG_ENV_SIZE		0x2000	/* Total Size of Environment Sector	*/
-#define CFG_ENV_SECT_SIZE	0x2000 /* see README - env sector total size	*/
+#define CONFIG_ENV_IS_IN_FLASH	1
+#define CONFIG_ENV_OFFSET		0x4000	/* Address of Environment Sector*/
+#define CONFIG_ENV_SIZE		0x2000	/* Total Size of Environment Sector	*/
+#define CONFIG_ENV_SECT_SIZE	0x2000 /* see README - env sector total size	*/
 
 /*-----------------------------------------------------------------------
  * Start addresses for the final memory configuration
  * (Set up by the startup code)
- * Please note that CFG_SDRAM_BASE _must_ start at 0
+ * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
  */
-#define CFG_SDRAM_BASE		0x00000000
-#define CFG_SDRAM_SIZE		16		/* SDRAM size in MB */
-#define CFG_FLASH_BASE		(CFG_CSAR0 << 16)
+#define CONFIG_SYS_SDRAM_BASE		0x00000000
+#define CONFIG_SYS_SDRAM_SIZE		16		/* SDRAM size in MB */
+#define CONFIG_SYS_FLASH_BASE		(CONFIG_SYS_CS0_BASE)
 
 #if 0 /* test-only */
 #define CONFIG_PRAM		512 /* test-only for SDRAM problem!!!!!!!!!!!!!!!!!!!! */
 #endif
 
-#define CFG_MONITOR_BASE	(CFG_FLASH_BASE + 0x400)
+#define CONFIG_SYS_MONITOR_BASE	(CONFIG_SYS_FLASH_BASE + 0x400)
 
-#define CFG_MONITOR_LEN		0x20000
-#define CFG_MALLOC_LEN		(1 * 1024*1024)	/* Reserve 1 MB for malloc()	*/
-#define CFG_BOOTPARAMS_LEN	64*1024
+#define CONFIG_SYS_MONITOR_LEN		0x20000
+#define CONFIG_SYS_MALLOC_LEN		(1 * 1024*1024)	/* Reserve 1 MB for malloc()	*/
+#define CONFIG_SYS_BOOTPARAMS_LEN	64*1024
 
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization ??
  */
-#define CFG_BOOTMAPSZ		(CFG_SDRAM_BASE + (CFG_SDRAM_SIZE << 20))
+#define CONFIG_SYS_BOOTMAPSZ		(CONFIG_SYS_SDRAM_BASE + (CONFIG_SYS_SDRAM_SIZE << 20))
 
 /*-----------------------------------------------------------------------
  * FLASH organization
  */
-#define CFG_FLASH_CFI
-#ifdef CFG_FLASH_CFI
+#define CONFIG_SYS_FLASH_CFI
+#ifdef CONFIG_SYS_FLASH_CFI
 
 #	define CONFIG_FLASH_CFI_DRIVER	1
-#	define CFG_FLASH_SIZE		0x1000000	/* Max size that the board might have */
-#	define CFG_FLASH_CFI_WIDTH	FLASH_CFI_16BIT
-#	define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks */
-#	define CFG_MAX_FLASH_SECT	137	/* max number of sectors on one chip */
-#	define CFG_FLASH_PROTECTION	/* "Real" (hardware) sectors protection */
-#	define CFG_FLASH_CHECKSUM
-#	define CFG_FLASH_BANKS_LIST	{ CFG_FLASH_BASE }
+#	define CONFIG_SYS_FLASH_SIZE		0x1000000	/* Max size that the board might have */
+#	define CONFIG_SYS_FLASH_CFI_WIDTH	FLASH_CFI_16BIT
+#	define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks */
+#	define CONFIG_SYS_MAX_FLASH_SECT	137	/* max number of sectors on one chip */
+#	define CONFIG_SYS_FLASH_PROTECTION	/* "Real" (hardware) sectors protection */
+#	define CONFIG_SYS_FLASH_CHECKSUM
+#	define CONFIG_SYS_FLASH_BANKS_LIST	{ CONFIG_SYS_FLASH_BASE }
 #endif
 
 /*-----------------------------------------------------------------------
  * Cache Configuration
  */
-#define CFG_CACHELINE_SIZE	16
+#define CONFIG_SYS_CACHELINE_SIZE	16
 
 /*-----------------------------------------------------------------------
  * Memory bank definitions
  */
 
 /* CS0 - AMD Flash, address 0xffc00000 */
-#define	CFG_CSAR0		0xffe0
-#define	CFG_CSCR0		0x1980		/* WS=0110, AA=1, PS=10         */
+#define	CONFIG_SYS_CS0_BASE		0xffe00000
+#define	CONFIG_SYS_CS0_CTRL		0x00001980	/* WS=0110, AA=1, PS=10         */
 /** Note: There is a CSMR0/DRAM vector problem, need to disable C/I ***/
-#define	CFG_CSMR0		0x003f0021	/* 4MB, AA=0, WP=0, C/I=1, V=1  */
+#define	CONFIG_SYS_CS0_MASK		0x003f0021	/* 4MB, AA=0, WP=0, C/I=1, V=1  */
 
 /* CS1 - FPGA, address 0xe0000000 */
-#define	CFG_CSAR1		0xe000
-#define	CFG_CSCR1		0x0d80		/* WS=0011, AA=1, PS=10         */
-#define	CFG_CSMR1		0x00010001	/* 128kB, AA=0, WP=0, C/I=0, V=1*/
+#define	CONFIG_SYS_CS1_BASE		0xe0000000
+#define	CONFIG_SYS_CS1_CTRL		0x00000d80	/* WS=0011, AA=1, PS=10         */
+#define	CONFIG_SYS_CS1_MASK		0x00010001	/* 128kB, AA=0, WP=0, C/I=0, V=1*/
 
 /*-----------------------------------------------------------------------
  * Port configuration
  */
-#define	CFG_GPIO_FUNC		0x00000008	/* Set gpio pins: none          */
-#define	CFG_GPIO1_FUNC		0x00df00f0	/* 36-39(SWITCH),48-52(FPGAs),54*/
-#define	CFG_GPIO_EN		0x00000008	/* Set gpio output enable       */
-#define	CFG_GPIO1_EN		0x00c70000	/* Set gpio output enable       */
-#define	CFG_GPIO_OUT		0x00000008	/* Set outputs to default state */
-#define	CFG_GPIO1_OUT		0x00c70000	/* Set outputs to default state */
-#define CFG_GPIO1_LED		0x00400000	/* user led                     */
+#define	CONFIG_SYS_GPIO_FUNC		0x00000008	/* Set gpio pins: none          */
+#define	CONFIG_SYS_GPIO1_FUNC		0x00df00f0	/* 36-39(SWITCH),48-52(FPGAs),54*/
+#define	CONFIG_SYS_GPIO_EN		0x00000008	/* Set gpio output enable       */
+#define	CONFIG_SYS_GPIO1_EN		0x00c70000	/* Set gpio output enable       */
+#define	CONFIG_SYS_GPIO_OUT		0x00000008	/* Set outputs to default state */
+#define	CONFIG_SYS_GPIO1_OUT		0x00c70000	/* Set outputs to default state */
+#define CONFIG_SYS_GPIO1_LED		0x00400000	/* user led                     */
 
 #endif	/* M5249 */
diff --git a/include/configs/M5253DEMO.h b/include/configs/M5253DEMO.h
index 9f78f6ebc..378e45a44 100644
--- a/include/configs/M5253DEMO.h
+++ b/include/configs/M5253DEMO.h
@@ -31,9 +31,9 @@
 #define CONFIG_MCFTMR
 
 #define CONFIG_MCFUART
-#define CFG_UART_PORT		(0)
+#define CONFIG_SYS_UART_PORT		(0)
 #define CONFIG_BAUDRATE		115200
-#define CFG_BAUDRATE_TABLE	{ 9600 , 19200 , 38400 , 57600, 115200 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600 , 19200 , 38400 , 57600, 115200 }
 
 #undef CONFIG_WATCHDOG		/* disable watchdog */
 
@@ -43,13 +43,13 @@
  * Environment is embedded in u-boot in the second sector of the flash
  */
 #ifdef CONFIG_MONITOR_IS_IN_RAM
-#	define CFG_ENV_OFFSET		0x4000
-#	define CFG_ENV_SECT_SIZE	0x1000
-#	define CFG_ENV_IS_IN_FLASH	1
+#	define CONFIG_ENV_OFFSET		0x4000
+#	define CONFIG_ENV_SECT_SIZE	0x1000
+#	define CONFIG_ENV_IS_IN_FLASH	1
 #else
-#	define CFG_ENV_ADDR		(CFG_FLASH_BASE + 0x4000)
-#	define CFG_ENV_SECT_SIZE	0x1000
-#	define CFG_ENV_IS_IN_FLASH	1
+#	define CONFIG_ENV_ADDR		(CONFIG_SYS_FLASH_BASE + 0x4000)
+#	define CONFIG_ENV_SECT_SIZE	0x1000
+#	define CONFIG_ENV_IS_IN_FLASH	1
 #endif
 
 /*
@@ -75,22 +75,22 @@
 #	define CONFIG_ATAPI
 #	undef CONFIG_LBA48
 
-#	define CFG_IDE_MAXBUS		1
-#	define CFG_IDE_MAXDEVICE	2
+#	define CONFIG_SYS_IDE_MAXBUS		1
+#	define CONFIG_SYS_IDE_MAXDEVICE	2
 
-#	define CFG_ATA_BASE_ADDR	(CFG_MBAR2 + 0x800)
-#	define CFG_ATA_IDE0_OFFSET	0
+#	define CONFIG_SYS_ATA_BASE_ADDR	(CONFIG_SYS_MBAR2 + 0x800)
+#	define CONFIG_SYS_ATA_IDE0_OFFSET	0
 
-#	define CFG_ATA_DATA_OFFSET	0xA0	/* Offset for data I/O */
-#	define CFG_ATA_REG_OFFSET	0xA0	/* Offset for normal register accesses */
-#	define CFG_ATA_ALT_OFFSET	0xC0	/* Offset for alternate registers */
-#	define CFG_ATA_STRIDE		4	/* Interval between registers */
+#	define CONFIG_SYS_ATA_DATA_OFFSET	0xA0	/* Offset for data I/O */
+#	define CONFIG_SYS_ATA_REG_OFFSET	0xA0	/* Offset for normal register accesses */
+#	define CONFIG_SYS_ATA_ALT_OFFSET	0xC0	/* Offset for alternate registers */
+#	define CONFIG_SYS_ATA_STRIDE		4	/* Interval between registers */
 #	define _IO_BASE			0
 #endif
 
 #define CONFIG_DRIVER_DM9000
 #ifdef CONFIG_DRIVER_DM9000
-#	define CONFIG_DM9000_BASE	((CFG_CSAR1 << 16) | 0x300)
+#	define CONFIG_DM9000_BASE	(CONFIG_SYS_CS1_BASE | 0x300)
 #	define DM9000_IO		CONFIG_DM9000_BASE
 #	define DM9000_DATA		(CONFIG_DM9000_BASE + 4)
 #	undef CONFIG_DM9000_DEBUG
@@ -104,7 +104,7 @@
 
 #	define CONFIG_EXTRA_ENV_SETTINGS		\
 		"netdev=eth0\0"				\
-		"inpclk=" MK_STR(CFG_INPUT_CLKSRC) "\0"	\
+		"inpclk=" MK_STR(CONFIG_SYS_INPUT_CLKSRC) "\0"	\
 		"loadaddr=10000\0"			\
 		"u-boot=u-boot.bin\0"			\
 		"load=tftp ${loadaddr) ${u-boot}\0"	\
@@ -121,41 +121,41 @@
 /* I2C */
 #define CONFIG_FSL_I2C
 #define CONFIG_HARD_I2C		/* I2C with hw support */
-#define CFG_I2C_SPEED		80000
-#define CFG_I2C_SLAVE		0x7F
-#define CFG_I2C_OFFSET		0x00000280
-#define CFG_IMMR		CFG_MBAR
-#define CFG_I2C_PINMUX_REG	(*(u32 *) (CFG_MBAR+0x19C))
-#define CFG_I2C_PINMUX_CLR	(0xFFFFE7FF)
-#define CFG_I2C_PINMUX_SET	(0)
+#define CONFIG_SYS_I2C_SPEED		80000
+#define CONFIG_SYS_I2C_SLAVE		0x7F
+#define CONFIG_SYS_I2C_OFFSET		0x00000280
+#define CONFIG_SYS_IMMR		CONFIG_SYS_MBAR
+#define CONFIG_SYS_I2C_PINMUX_REG	(*(u32 *) (CONFIG_SYS_MBAR+0x19C))
+#define CONFIG_SYS_I2C_PINMUX_CLR	(0xFFFFE7FF)
+#define CONFIG_SYS_I2C_PINMUX_SET	(0)
 
-#define CFG_PROMPT		"=> "
-#define CFG_LONGHELP		/* undef to save memory */
+#define CONFIG_SYS_PROMPT		"=> "
+#define CONFIG_SYS_LONGHELP		/* undef to save memory */
 
 #if defined(CONFIG_CMD_KGDB)
-#	define CFG_CBSIZE		1024	/* Console I/O Buffer Size */
+#	define CONFIG_SYS_CBSIZE		1024	/* Console I/O Buffer Size */
 #else
-#	define CFG_CBSIZE		256	/* Console I/O Buffer Size */
+#	define CONFIG_SYS_CBSIZE		256	/* Console I/O Buffer Size */
 #endif
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16)	/* Print Buffer Size */
-#define CFG_MAXARGS		16	/* max number of command args */
-#define CFG_BARGSIZE		CFG_CBSIZE	/* Boot Argument Buffer Size */
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)	/* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS		16	/* max number of command args */
+#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size */
 
-#define CFG_LOAD_ADDR		0x00100000
+#define CONFIG_SYS_LOAD_ADDR		0x00100000
 
-#define CFG_MEMTEST_START	0x400
-#define CFG_MEMTEST_END		0x380000
+#define CONFIG_SYS_MEMTEST_START	0x400
+#define CONFIG_SYS_MEMTEST_END		0x380000
 
-#define CFG_HZ			1000
+#define CONFIG_SYS_HZ			1000
 
-#undef CFG_PLL_BYPASS		/* bypass PLL for test purpose */
-#define CFG_FAST_CLK
-#ifdef CFG_FAST_CLK
-#	define CFG_PLLCR	0x1243E054
-#	define CFG_CLK		140000000
+#undef CONFIG_SYS_PLL_BYPASS		/* bypass PLL for test purpose */
+#define CONFIG_SYS_FAST_CLK
+#ifdef CONFIG_SYS_FAST_CLK
+#	define CONFIG_SYS_PLLCR	0x1243E054
+#	define CONFIG_SYS_CLK		140000000
 #else
-#	define CFG_PLLCR	0x135a4140
-#	define CFG_CLK		70000000
+#	define CONFIG_SYS_PLLCR	0x135a4140
+#	define CONFIG_SYS_CLK		70000000
 #endif
 
 /*
@@ -164,100 +164,92 @@
  * You should know what you are doing if you make changes here.
  */
 
-#define CFG_MBAR		0x10000000	/* Register Base Addrs */
-#define CFG_MBAR2		0x80000000	/* Module Base Addrs 2 */
+#define CONFIG_SYS_MBAR		0x10000000	/* Register Base Addrs */
+#define CONFIG_SYS_MBAR2		0x80000000	/* Module Base Addrs 2 */
 
 /*
  * Definitions for initial stack pointer and data area (in DPRAM)
  */
-#define CFG_INIT_RAM_ADDR	0x20000000
-#define CFG_INIT_RAM_END	0x10000	/* End of used area in internal SRAM */
-#define CFG_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_INIT_RAM_ADDR	0x20000000
+#define CONFIG_SYS_INIT_RAM_END	0x10000	/* End of used area in internal SRAM */
+#define CONFIG_SYS_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
 /*
  * Start addresses for the final memory configuration
  * (Set up by the startup code)
- * Please note that CFG_SDRAM_BASE _must_ start at 0
+ * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
  */
-#define CFG_SDRAM_BASE		0x00000000
-#define CFG_SDRAM_SIZE		16	/* SDRAM size in MB */
+#define CONFIG_SYS_SDRAM_BASE		0x00000000
+#define CONFIG_SYS_SDRAM_SIZE		16	/* SDRAM size in MB */
 
 #ifdef CONFIG_MONITOR_IS_IN_RAM
-#	define CFG_MONITOR_BASE	0x20000
+#	define CONFIG_SYS_MONITOR_BASE	0x20000
 #else
-#	define CFG_MONITOR_BASE	(CFG_FLASH_BASE + 0x400)
+#	define CONFIG_SYS_MONITOR_BASE	(CONFIG_SYS_FLASH_BASE + 0x400)
 #endif
 
-#define CFG_MONITOR_LEN		0x40000
-#define CFG_MALLOC_LEN		(256 << 10)
-#define CFG_BOOTPARAMS_LEN	(64*1024)
+#define CONFIG_SYS_MONITOR_LEN		0x40000
+#define CONFIG_SYS_MALLOC_LEN		(256 << 10)
+#define CONFIG_SYS_BOOTPARAMS_LEN	(64*1024)
 
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization ??
  */
-#define CFG_BOOTMAPSZ		(CFG_SDRAM_BASE + (CFG_SDRAM_SIZE << 20))
+#define CONFIG_SYS_BOOTMAPSZ		(CONFIG_SYS_SDRAM_BASE + (CONFIG_SYS_SDRAM_SIZE << 20))
 
 /* FLASH organization */
-#define CFG_FLASH_BASE		(CFG_CSAR0 << 16)
-#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks */
-#define CFG_MAX_FLASH_SECT	2048	/* max number of sectors on one chip */
-#define CFG_FLASH_ERASE_TOUT	1000
+#define CONFIG_SYS_FLASH_BASE		(CONFIG_SYS_CS0_BASE)
+#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks */
+#define CONFIG_SYS_MAX_FLASH_SECT	2048	/* max number of sectors on one chip */
+#define CONFIG_SYS_FLASH_ERASE_TOUT	1000
 
 #define FLASH_SST6401B		0x200
 #define SST_ID_xF6401B		0x236D236D
 
-#undef CFG_FLASH_CFI
-#ifdef CFG_FLASH_CFI
+#undef CONFIG_SYS_FLASH_CFI
+#ifdef CONFIG_SYS_FLASH_CFI
 /*
  * Unable to use CFI driver, due to incompatible sector erase command by SST.
  * Amd/Atmel use 0x30 for sector erase, SST use 0x50.
  * 0x30 is block erase in SST
  */
 #	define CONFIG_FLASH_CFI_DRIVER	1
-#	define CFG_FLASH_SIZE		0x800000
-#	define CFG_FLASH_CFI_WIDTH	FLASH_CFI_16BIT
+#	define CONFIG_SYS_FLASH_SIZE		0x800000
+#	define CONFIG_SYS_FLASH_CFI_WIDTH	FLASH_CFI_16BIT
 #	define CONFIG_FLASH_CFI_LEGACY
 #else
-#	define CFG_SST_SECT		2048
-#	define CFG_SST_SECTSZ		0x1000
-#	define CFG_FLASH_WRITE_TOUT	500
+#	define CONFIG_SYS_SST_SECT		2048
+#	define CONFIG_SYS_SST_SECTSZ		0x1000
+#	define CONFIG_SYS_FLASH_WRITE_TOUT	500
 #endif
 
 /* Cache Configuration */
-#define CFG_CACHELINE_SIZE	16
+#define CONFIG_SYS_CACHELINE_SIZE	16
 
 /* Port configuration */
-#define CFG_FECI2C		0xF0
+#define CONFIG_SYS_FECI2C		0xF0
 
-#define CFG_CSAR0		0xFF80
-#define CFG_CSMR0		0x007F0021
-#define CFG_CSCR0		0x1D80
+#define CONFIG_SYS_CS0_BASE		0xFF800000
+#define CONFIG_SYS_CS0_MASK		0x007F0021
+#define CONFIG_SYS_CS0_CTRL		0x00001D80
 
-#define CFG_CSAR1               0xE000
-#define CFG_CSMR1               0x00000001
-#define CFG_CSCR1               0x3DD8
-
-#define CFG_CSAR2		0
-#define CFG_CSMR2		0
-#define CFG_CSCR2		0
-
-#define CFG_CSAR3		0
-#define CFG_CSMR3		0
-#define CFG_CSCR3		0
+#define CONFIG_SYS_CS1_BASE		0xE0000000
+#define CONFIG_SYS_CS1_MASK		0x00000001
+#define CONFIG_SYS_CS1_CTRL		0x00003DD8
 
 /*-----------------------------------------------------------------------
  * Port configuration
  */
-#define CFG_GPIO_FUNC		0x00000008	/* Set gpio pins: none */
-#define CFG_GPIO1_FUNC		0x00df00f0	/* 36-39(SWITCH),48-52(FPGAs),54 */
-#define CFG_GPIO_EN		0x00000008	/* Set gpio output enable */
-#define CFG_GPIO1_EN		0x00c70000	/* Set gpio output enable */
-#define CFG_GPIO_OUT		0x00000008	/* Set outputs to default state */
-#define CFG_GPIO1_OUT		0x00c70000	/* Set outputs to default state */
-#define CFG_GPIO1_LED		0x00400000	/* user led */
+#define CONFIG_SYS_GPIO_FUNC		0x00000008	/* Set gpio pins: none */
+#define CONFIG_SYS_GPIO1_FUNC		0x00df00f0	/* 36-39(SWITCH),48-52(FPGAs),54 */
+#define CONFIG_SYS_GPIO_EN		0x00000008	/* Set gpio output enable */
+#define CONFIG_SYS_GPIO1_EN		0x00c70000	/* Set gpio output enable */
+#define CONFIG_SYS_GPIO_OUT		0x00000008	/* Set outputs to default state */
+#define CONFIG_SYS_GPIO1_OUT		0x00c70000	/* Set outputs to default state */
+#define CONFIG_SYS_GPIO1_LED		0x00400000	/* user led */
 
 #endif				/* _M5253DEMO_H */
diff --git a/include/configs/M5253EVBE.h b/include/configs/M5253EVBE.h
index 6e14ebf5b..86de97d7d 100644
--- a/include/configs/M5253EVBE.h
+++ b/include/configs/M5253EVBE.h
@@ -31,9 +31,9 @@
 #define CONFIG_MCFTMR
 
 #define CONFIG_MCFUART
-#define CFG_UART_PORT		(0)
+#define CONFIG_SYS_UART_PORT		(0)
 #define CONFIG_BAUDRATE		115200
-#define CFG_BAUDRATE_TABLE	{ 9600 , 19200 , 38400 , 57600, 115200 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600 , 19200 , 38400 , 57600, 115200 }
 
 #undef CONFIG_WATCHDOG		/* disable watchdog */
 
@@ -43,13 +43,13 @@
  * Environment is embedded in u-boot in the second sector of the flash
  */
 #ifndef CONFIG_MONITOR_IS_IN_RAM
-#define CFG_ENV_OFFSET		0x4000
-#define CFG_ENV_SECT_SIZE	0x2000
-#define CFG_ENV_IS_IN_FLASH	1
+#define CONFIG_ENV_OFFSET		0x4000
+#define CONFIG_ENV_SECT_SIZE	0x2000
+#define CONFIG_ENV_IS_IN_FLASH	1
 #else
-#define CFG_ENV_ADDR		0xffe04000
-#define CFG_ENV_SECT_SIZE	0x2000
-#define CFG_ENV_IS_IN_FLASH	1
+#define CONFIG_ENV_ADDR		0xffe04000
+#define CONFIG_ENV_SECT_SIZE	0x2000
+#define CONFIG_ENV_IS_IN_FLASH	1
 #endif
 
 /*
@@ -81,45 +81,45 @@
 #define CONFIG_ATAPI
 #undef CONFIG_LBA48
 
-#define CFG_IDE_MAXBUS		1
-#define CFG_IDE_MAXDEVICE	2
+#define CONFIG_SYS_IDE_MAXBUS		1
+#define CONFIG_SYS_IDE_MAXDEVICE	2
 
-#define CFG_ATA_BASE_ADDR	(CFG_MBAR2 + 0x800)
-#define CFG_ATA_IDE0_OFFSET	0
+#define CONFIG_SYS_ATA_BASE_ADDR	(CONFIG_SYS_MBAR2 + 0x800)
+#define CONFIG_SYS_ATA_IDE0_OFFSET	0
 
-#define CFG_ATA_DATA_OFFSET	0xA0	/* Offset for data I/O */
-#define CFG_ATA_REG_OFFSET	0xA0	/* Offset for normal register accesses */
-#define CFG_ATA_ALT_OFFSET	0xC0	/* Offset for alternate registers */
-#define CFG_ATA_STRIDE		4	/* Interval between registers */
+#define CONFIG_SYS_ATA_DATA_OFFSET	0xA0	/* Offset for data I/O */
+#define CONFIG_SYS_ATA_REG_OFFSET	0xA0	/* Offset for normal register accesses */
+#define CONFIG_SYS_ATA_ALT_OFFSET	0xC0	/* Offset for alternate registers */
+#define CONFIG_SYS_ATA_STRIDE		4	/* Interval between registers */
 #define _IO_BASE		0
 
-#define CFG_PROMPT		"=> "
-#define CFG_LONGHELP		/* undef to save memory */
+#define CONFIG_SYS_PROMPT		"=> "
+#define CONFIG_SYS_LONGHELP		/* undef to save memory */
 
 #if defined(CONFIG_CMD_KGDB)
-#define CFG_CBSIZE		1024	/* Console I/O Buffer Size */
+#define CONFIG_SYS_CBSIZE		1024	/* Console I/O Buffer Size */
 #else
-#define CFG_CBSIZE		256	/* Console I/O Buffer Size */
+#define CONFIG_SYS_CBSIZE		256	/* Console I/O Buffer Size */
 #endif
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16)	/* Print Buffer Size */
-#define CFG_MAXARGS		16	/* max number of command args */
-#define CFG_BARGSIZE		CFG_CBSIZE	/* Boot Argument Buffer Size */
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)	/* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS		16	/* max number of command args */
+#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size */
 
-#define CFG_LOAD_ADDR		0x00100000
+#define CONFIG_SYS_LOAD_ADDR		0x00100000
 
-#define CFG_MEMTEST_START	0x400
-#define CFG_MEMTEST_END		0x380000
+#define CONFIG_SYS_MEMTEST_START	0x400
+#define CONFIG_SYS_MEMTEST_END		0x380000
 
-#define CFG_HZ			1000
+#define CONFIG_SYS_HZ			1000
 
-#undef CFG_PLL_BYPASS		/* bypass PLL for test purpose */
-#define CFG_FAST_CLK
-#ifdef CFG_FAST_CLK
-#	define CFG_PLLCR	0x1243E054
-#	define CFG_CLK		140000000
+#undef CONFIG_SYS_PLL_BYPASS		/* bypass PLL for test purpose */
+#define CONFIG_SYS_FAST_CLK
+#ifdef CONFIG_SYS_FAST_CLK
+#	define CONFIG_SYS_PLLCR	0x1243E054
+#	define CONFIG_SYS_CLK		140000000
 #else
-#	define CFG_PLLCR	0x135a4140
-#	define CFG_CLK		70000000
+#	define CONFIG_SYS_PLLCR	0x135a4140
+#	define CONFIG_SYS_CLK		70000000
 #endif
 
 /*
@@ -128,85 +128,73 @@
  * You should know what you are doing if you make changes here.
  */
 
-#define CFG_MBAR		0x10000000	/* Register Base Addrs */
-#define CFG_MBAR2		0x80000000	/* Module Base Addrs 2 */
+#define CONFIG_SYS_MBAR		0x10000000	/* Register Base Addrs */
+#define CONFIG_SYS_MBAR2		0x80000000	/* Module Base Addrs 2 */
 
 /*
  * Definitions for initial stack pointer and data area (in DPRAM)
  */
-#define CFG_INIT_RAM_ADDR	0x20000000
-#define CFG_INIT_RAM_END	0x10000	/* End of used area in internal SRAM */
-#define CFG_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_INIT_RAM_ADDR	0x20000000
+#define CONFIG_SYS_INIT_RAM_END	0x10000	/* End of used area in internal SRAM */
+#define CONFIG_SYS_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
 /*
  * Start addresses for the final memory configuration
  * (Set up by the startup code)
- * Please note that CFG_SDRAM_BASE _must_ start at 0
+ * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
  */
-#define CFG_SDRAM_BASE		0x00000000
-#define CFG_SDRAM_SIZE		8	/* SDRAM size in MB */
+#define CONFIG_SYS_SDRAM_BASE		0x00000000
+#define CONFIG_SYS_SDRAM_SIZE		8	/* SDRAM size in MB */
 
 #ifdef CONFIG_MONITOR_IS_IN_RAM
-#define CFG_MONITOR_BASE	0x20000
+#define CONFIG_SYS_MONITOR_BASE	0x20000
 #else
-#define CFG_MONITOR_BASE	(CFG_FLASH_BASE + 0x400)
+#define CONFIG_SYS_MONITOR_BASE	(CONFIG_SYS_FLASH_BASE + 0x400)
 #endif
 
-#define CFG_MONITOR_LEN		0x40000
-#define CFG_MALLOC_LEN		(256 << 10)
-#define CFG_BOOTPARAMS_LEN	(64*1024)
+#define CONFIG_SYS_MONITOR_LEN		0x40000
+#define CONFIG_SYS_MALLOC_LEN		(256 << 10)
+#define CONFIG_SYS_BOOTPARAMS_LEN	(64*1024)
 
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization ??
  */
-#define CFG_BOOTMAPSZ		(CFG_SDRAM_BASE + (CFG_SDRAM_SIZE << 20))
+#define CONFIG_SYS_BOOTMAPSZ		(CONFIG_SYS_SDRAM_BASE + (CONFIG_SYS_SDRAM_SIZE << 20))
 
 /* FLASH organization */
-#define CFG_FLASH_BASE		0xffe00000
-#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks */
-#define CFG_MAX_FLASH_SECT	35	/* max number of sectors on one chip */
-#define CFG_FLASH_ERASE_TOUT	1000
+#define CONFIG_SYS_FLASH_BASE		CONFIG_SYS_CS0_BASE
+#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks */
+#define CONFIG_SYS_MAX_FLASH_SECT	35	/* max number of sectors on one chip */
+#define CONFIG_SYS_FLASH_ERASE_TOUT	1000
 
-#define CFG_FLASH_CFI		1
+#define CONFIG_SYS_FLASH_CFI		1
 #define CONFIG_FLASH_CFI_DRIVER	1
-#define CFG_FLASH_SIZE		0x200000
-#define CFG_FLASH_CFI_WIDTH	FLASH_CFI_16BIT
+#define CONFIG_SYS_FLASH_SIZE		0x200000
+#define CONFIG_SYS_FLASH_CFI_WIDTH	FLASH_CFI_16BIT
 
 /* Cache Configuration */
-#define CFG_CACHELINE_SIZE	16
+#define CONFIG_SYS_CACHELINE_SIZE	16
 
 /* Port configuration */
-#define CFG_FECI2C		0xF0
+#define CONFIG_SYS_FECI2C		0xF0
 
-#define CFG_CSAR0		0xFFE0
-#define CFG_CSMR0		0x001F0021
-#define CFG_CSCR0		0x1D80
-
-#define CFG_CSAR1		0
-#define CFG_CSMR1		0
-#define CFG_CSCR1		0
-
-#define CFG_CSAR2		0
-#define CFG_CSMR2		0
-#define CFG_CSCR2		0
-
-#define CFG_CSAR3		0
-#define CFG_CSMR3		0
-#define CFG_CSCR3		0
+#define CONFIG_SYS_CS0_BASE		0xFFE00000
+#define CONFIG_SYS_CS0_MASK		0x001F0021
+#define CONFIG_SYS_CS0_CTRL		0x00001D80
 
 /*-----------------------------------------------------------------------
  * Port configuration
  */
-#define CFG_GPIO_FUNC		0x00000008	/* Set gpio pins: none */
-#define CFG_GPIO1_FUNC		0x00df00f0	/* 36-39(SWITCH),48-52(FPGAs),54 */
-#define CFG_GPIO_EN		0x00000008	/* Set gpio output enable */
-#define CFG_GPIO1_EN		0x00c70000	/* Set gpio output enable */
-#define CFG_GPIO_OUT		0x00000008	/* Set outputs to default state */
-#define CFG_GPIO1_OUT		0x00c70000	/* Set outputs to default state */
-#define CFG_GPIO1_LED		0x00400000	/* user led */
+#define CONFIG_SYS_GPIO_FUNC		0x00000008	/* Set gpio pins: none */
+#define CONFIG_SYS_GPIO1_FUNC		0x00df00f0	/* 36-39(SWITCH),48-52(FPGAs),54 */
+#define CONFIG_SYS_GPIO_EN		0x00000008	/* Set gpio output enable */
+#define CONFIG_SYS_GPIO1_EN		0x00c70000	/* Set gpio output enable */
+#define CONFIG_SYS_GPIO_OUT		0x00000008	/* Set outputs to default state */
+#define CONFIG_SYS_GPIO1_OUT		0x00c70000	/* Set outputs to default state */
+#define CONFIG_SYS_GPIO1_LED		0x00400000	/* user led */
 
 #endif				/* _M5253EVB_H */
diff --git a/include/configs/M5271EVB.h b/include/configs/M5271EVB.h
index 78a1b93cf..7ddeb550b 100644
--- a/include/configs/M5271EVB.h
+++ b/include/configs/M5271EVB.h
@@ -41,9 +41,9 @@
 #define CONFIG_MCFTMR
 
 #define CONFIG_MCFUART
-#define CFG_UART_PORT		(0)
+#define CONFIG_SYS_UART_PORT		(0)
 #define CONFIG_BAUDRATE		115200
-#define CFG_BAUDRATE_TABLE	{ 9600 , 19200 , 38400 , 57600, 115200 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600 , 19200 , 38400 , 57600, 115200 }
 
 #undef CONFIG_WATCHDOG		/* disable watchdog */
 
@@ -51,13 +51,13 @@
  * Environment is embedded in u-boot in the second sector of the flash
  */
 #ifndef CONFIG_MONITOR_IS_IN_RAM
-#define CFG_ENV_OFFSET		0x4000
+#define CONFIG_ENV_OFFSET		0x4000
 #else
-#define CFG_ENV_ADDR		0xffe04000
+#define CONFIG_ENV_ADDR		0xffe04000
 #endif
-#define CFG_ENV_SECT_SIZE	0x2000
-#define CFG_ENV_IS_IN_FLASH	1
-#define	CFG_USE_PPCENV			/* Environment embedded in sect .ppcenv */
+#define CONFIG_ENV_SECT_SIZE	0x2000
+#define CONFIG_ENV_IS_IN_FLASH	1
+#define	CONFIG_SYS_USE_PPCENV			/* Environment embedded in sect .ppcenv */
 
 /*
  * BOOTP options
@@ -89,32 +89,32 @@
 #	define CONFIG_NET_MULTI		1
 #	define CONFIG_MII		1
 #	define CONFIG_MII_INIT		1
-#	define CFG_DISCOVER_PHY
-#	define CFG_RX_ETH_BUFFER	8
-#	define CFG_FAULT_ECHO_LINK_DOWN
+#	define CONFIG_SYS_DISCOVER_PHY
+#	define CONFIG_SYS_RX_ETH_BUFFER	8
+#	define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
 
-#	define CFG_FEC0_PINMUX		0
-#	define CFG_FEC0_MIIBASE		CFG_FEC0_IOBASE
+#	define CONFIG_SYS_FEC0_PINMUX		0
+#	define CONFIG_SYS_FEC0_MIIBASE		CONFIG_SYS_FEC0_IOBASE
 #	define MCFFEC_TOUT_LOOP		50000
-/* If CFG_DISCOVER_PHY is not defined - hardcoded */
-#	ifndef CFG_DISCOVER_PHY
+/* If CONFIG_SYS_DISCOVER_PHY is not defined - hardcoded */
+#	ifndef CONFIG_SYS_DISCOVER_PHY
 #		define FECDUPLEX	FULL
 #		define FECSPEED		_100BASET
 #	else
-#		ifndef CFG_FAULT_ECHO_LINK_DOWN
-#			define CFG_FAULT_ECHO_LINK_DOWN
+#		ifndef CONFIG_SYS_FAULT_ECHO_LINK_DOWN
+#			define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
 #		endif
-#	endif			/* CFG_DISCOVER_PHY */
+#	endif			/* CONFIG_SYS_DISCOVER_PHY */
 #endif
 
 /* I2C */
 #define CONFIG_FSL_I2C
 #define CONFIG_HARD_I2C		/* I2C with hw support */
 #undef CONFIG_SOFT_I2C		/* I2C bit-banged */
-#define CFG_I2C_SPEED		80000
-#define CFG_I2C_SLAVE		0x7F
-#define CFG_I2C_OFFSET		0x00000300
-#define CFG_IMMR		CFG_MBAR
+#define CONFIG_SYS_I2C_SPEED		80000
+#define CONFIG_SYS_I2C_SLAVE		0x7F
+#define CONFIG_SYS_I2C_OFFSET		0x00000300
+#define CONFIG_SYS_IMMR		CONFIG_SYS_MBAR
 
 #define CONFIG_BOOTDELAY	1	/* autoboot after 5 seconds */
 #define CONFIG_BOOTFILE		"u-boot.bin"
@@ -141,25 +141,25 @@
 	"save\0"				\
 	""
 
-#define CFG_PROMPT		"=> "
-#define CFG_LONGHELP		/* undef to save memory */
+#define CONFIG_SYS_PROMPT		"=> "
+#define CONFIG_SYS_LONGHELP		/* undef to save memory */
 
 #if defined(CONFIG_CMD_KGDB)
-#define CFG_CBSIZE		1024	/* Console I/O Buffer Size      */
+#define CONFIG_SYS_CBSIZE		1024	/* Console I/O Buffer Size      */
 #else
-#define CFG_CBSIZE		256	/* Console I/O Buffer Size      */
+#define CONFIG_SYS_CBSIZE		256	/* Console I/O Buffer Size      */
 #endif
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16)	/* Print Buffer Size */
-#define CFG_MAXARGS		16	/* max number of command args   */
-#define CFG_BARGSIZE		CFG_CBSIZE	/* Boot Argument Buffer Size    */
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)	/* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS		16	/* max number of command args   */
+#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size    */
 
-#define CFG_LOAD_ADDR		0x00100000
+#define CONFIG_SYS_LOAD_ADDR		0x00100000
 
-#define CFG_MEMTEST_START	0x400
-#define CFG_MEMTEST_END		0x380000
+#define CONFIG_SYS_MEMTEST_START	0x400
+#define CONFIG_SYS_MEMTEST_END		0x380000
 
-#define CFG_HZ			1000000
-#define CFG_CLK			100000000
+#define CONFIG_SYS_HZ			1000000
+#define CONFIG_SYS_CLK			100000000
 
 /*
  * Low Level Configuration Settings
@@ -167,56 +167,56 @@
  * You should know what you are doing if you make changes here.
  */
 
-#define CFG_MBAR		0x40000000	/* Register Base Addrs */
+#define CONFIG_SYS_MBAR		0x40000000	/* Register Base Addrs */
 
 /*
  * Definitions for initial stack pointer and data area (in DPRAM)
  */
-#define CFG_INIT_RAM_ADDR	0x20000000
-#define CFG_INIT_RAM_END	0x1000	/* End of used area in internal SRAM    */
-#define CFG_GBL_DATA_SIZE	64	/* size in bytes reserved for initial data */
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_INIT_RAM_ADDR	0x20000000
+#define CONFIG_SYS_INIT_RAM_END	0x1000	/* End of used area in internal SRAM    */
+#define CONFIG_SYS_GBL_DATA_SIZE	64	/* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
 /*
  * Start addresses for the final memory configuration
  * (Set up by the startup code)
- * Please note that CFG_SDRAM_BASE _must_ start at 0
+ * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
  */
-#define CFG_SDRAM_BASE		0x00000000
-#define CFG_SDRAM_SIZE		16	/* SDRAM size in MB */
-#define CFG_FLASH_BASE		0xffe00000
+#define CONFIG_SYS_SDRAM_BASE		0x00000000
+#define CONFIG_SYS_SDRAM_SIZE		16	/* SDRAM size in MB */
+#define CONFIG_SYS_FLASH_BASE		0xffe00000
 
 #ifdef	CONFIG_MONITOR_IS_IN_RAM
-#define CFG_MONITOR_BASE	0x20000
+#define CONFIG_SYS_MONITOR_BASE	0x20000
 #else
-#define CFG_MONITOR_BASE	(CFG_FLASH_BASE + 0x400)
+#define CONFIG_SYS_MONITOR_BASE	(CONFIG_SYS_FLASH_BASE + 0x400)
 #endif
 
-#define CFG_MONITOR_LEN		0x40000
-#define CFG_MALLOC_LEN		(256 << 10)
-#define CFG_BOOTPARAMS_LEN	(64*1024)
+#define CONFIG_SYS_MONITOR_LEN		0x40000
+#define CONFIG_SYS_MALLOC_LEN		(256 << 10)
+#define CONFIG_SYS_BOOTPARAMS_LEN	(64*1024)
 
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization ??
  */
-#define CFG_BOOTMAPSZ		(CFG_SDRAM_BASE + (CFG_SDRAM_SIZE << 20))
+#define CONFIG_SYS_BOOTMAPSZ		(CONFIG_SYS_SDRAM_BASE + (CONFIG_SYS_SDRAM_SIZE << 20))
 
 /* FLASH organization */
-#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks           */
-#define CFG_MAX_FLASH_SECT	11	/* max number of sectors on one chip    */
-#define CFG_FLASH_ERASE_TOUT	1000
+#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks           */
+#define CONFIG_SYS_MAX_FLASH_SECT	11	/* max number of sectors on one chip    */
+#define CONFIG_SYS_FLASH_ERASE_TOUT	1000
 
-#define CFG_FLASH_CFI		1
+#define CONFIG_SYS_FLASH_CFI		1
 #define CONFIG_FLASH_CFI_DRIVER	1
-#define CFG_FLASH_SIZE		0x200000
+#define CONFIG_SYS_FLASH_SIZE		0x200000
 
 /* Cache Configuration */
-#define CFG_CACHELINE_SIZE	16
+#define CONFIG_SYS_CACHELINE_SIZE	16
 
 /* Port configuration */
-#define CFG_FECI2C		0xF0
+#define CONFIG_SYS_FECI2C		0xF0
 
 #endif				/* _M5271EVB_H */
diff --git a/include/configs/M5272C3.h b/include/configs/M5272C3.h
index fc457e3bc..fc73d6409 100644
--- a/include/configs/M5272C3.h
+++ b/include/configs/M5272C3.h
@@ -39,9 +39,9 @@
 #define CONFIG_MCFTMR
 
 #define CONFIG_MCFUART
-#define CFG_UART_PORT		(0)
+#define CONFIG_SYS_UART_PORT		(0)
 #define CONFIG_BAUDRATE		115200
-#define CFG_BAUDRATE_TABLE	{ 9600 , 19200 , 38400 , 57600, 115200 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600 , 19200 , 38400 , 57600, 115200 }
 
 #undef CONFIG_WATCHDOG
 #define CONFIG_WATCHDOG_TIMEOUT 10000	/* timeout in milliseconds */
@@ -52,14 +52,14 @@
  * Environment is embedded in u-boot in the second sector of the flash
  */
 #ifndef CONFIG_MONITOR_IS_IN_RAM
-#define CFG_ENV_OFFSET		0x4000
-#define CFG_ENV_SECT_SIZE	0x2000
-#define CFG_ENV_IS_IN_FLASH	1
-#define CFG_ENV_IS_EMBEDDED	1
+#define CONFIG_ENV_OFFSET		0x4000
+#define CONFIG_ENV_SECT_SIZE	0x2000
+#define CONFIG_ENV_IS_IN_FLASH	1
+#define CONFIG_ENV_IS_EMBEDDED	1
 #else
-#define CFG_ENV_ADDR		0xffe04000
-#define CFG_ENV_SECT_SIZE	0x2000
-#define CFG_ENV_IS_IN_FLASH	1
+#define CONFIG_ENV_ADDR		0xffe04000
+#define CONFIG_ENV_SECT_SIZE	0x2000
+#define CONFIG_ENV_IS_IN_FLASH	1
 #endif
 
 /*
@@ -92,22 +92,22 @@
 #	define CONFIG_NET_MULTI		1
 #	define CONFIG_MII		1
 #	define CONFIG_MII_INIT		1
-#	define CFG_DISCOVER_PHY
-#	define CFG_RX_ETH_BUFFER	8
-#	define CFG_FAULT_ECHO_LINK_DOWN
+#	define CONFIG_SYS_DISCOVER_PHY
+#	define CONFIG_SYS_RX_ETH_BUFFER	8
+#	define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
 
-#	define CFG_FEC0_PINMUX		0
-#	define CFG_FEC0_MIIBASE		CFG_FEC0_IOBASE
+#	define CONFIG_SYS_FEC0_PINMUX		0
+#	define CONFIG_SYS_FEC0_MIIBASE		CONFIG_SYS_FEC0_IOBASE
 #	define MCFFEC_TOUT_LOOP		50000
-/* If CFG_DISCOVER_PHY is not defined - hardcoded */
-#	ifndef CFG_DISCOVER_PHY
+/* If CONFIG_SYS_DISCOVER_PHY is not defined - hardcoded */
+#	ifndef CONFIG_SYS_DISCOVER_PHY
 #		define FECDUPLEX	FULL
 #		define FECSPEED		_100BASET
 #	else
-#		ifndef CFG_FAULT_ECHO_LINK_DOWN
-#			define CFG_FAULT_ECHO_LINK_DOWN
+#		ifndef CONFIG_SYS_FAULT_ECHO_LINK_DOWN
+#			define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
 #		endif
-#	endif			/* CFG_DISCOVER_PHY */
+#	endif			/* CONFIG_SYS_DISCOVER_PHY */
 #endif
 
 #ifdef CONFIG_MCFFEC
@@ -132,108 +132,114 @@
 	"save\0"				\
 	""
 
-#define CFG_PROMPT		"-> "
-#define CFG_LONGHELP		/* undef to save memory */
+#define CONFIG_SYS_PROMPT		"-> "
+#define CONFIG_SYS_LONGHELP		/* undef to save memory */
 
 #if defined(CONFIG_CMD_KGDB)
-#define CFG_CBSIZE		1024	/* Console I/O Buffer Size      */
+#define CONFIG_SYS_CBSIZE		1024	/* Console I/O Buffer Size      */
 #else
-#define CFG_CBSIZE		256	/* Console I/O Buffer Size      */
+#define CONFIG_SYS_CBSIZE		256	/* Console I/O Buffer Size      */
 #endif
 
-#define CFG_PBSIZE		(CFG_CBSIZE+sizeof(CFG_PROMPT)+16)	/* Print Buffer Size */
-#define CFG_MAXARGS		16	/* max number of command args   */
-#define CFG_BARGSIZE		CFG_CBSIZE	/* Boot Argument Buffer Size    */
-#define CFG_LOAD_ADDR		0x20000
-#define CFG_MEMTEST_START	0x400
-#define CFG_MEMTEST_END		0x380000
-#define CFG_HZ			1000
-#define CFG_CLK			66000000
+#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)	/* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS		16	/* max number of command args   */
+#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size    */
+#define CONFIG_SYS_LOAD_ADDR		0x20000
+#define CONFIG_SYS_MEMTEST_START	0x400
+#define CONFIG_SYS_MEMTEST_END		0x380000
+#define CONFIG_SYS_HZ			1000
+#define CONFIG_SYS_CLK			66000000
 
 /*
  * Low Level Configuration Settings
  * (address mappings, register initial values, etc.)
  * You should know what you are doing if you make changes here.
  */
-#define CFG_MBAR		0x10000000	/* Register Base Addrs */
-#define CFG_SCR			0x0003;
-#define CFG_SPR			0xffff;
+#define CONFIG_SYS_MBAR		0x10000000	/* Register Base Addrs */
+#define CONFIG_SYS_SCR			0x0003
+#define CONFIG_SYS_SPR			0xffff
 
 /*-----------------------------------------------------------------------
  * Definitions for initial stack pointer and data area (in DPRAM)
  */
-#define CFG_INIT_RAM_ADDR	0x20000000
-#define CFG_INIT_RAM_END	0x1000	/* End of used area in internal SRAM    */
-#define CFG_GBL_DATA_SIZE	64	/* size in bytes reserved for initial data */
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_INIT_RAM_ADDR	0x20000000
+#define CONFIG_SYS_INIT_RAM_END	0x1000	/* End of used area in internal SRAM    */
+#define CONFIG_SYS_GBL_DATA_SIZE	64	/* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
 /*-----------------------------------------------------------------------
  * Start addresses for the final memory configuration
  * (Set up by the startup code)
- * Please note that CFG_SDRAM_BASE _must_ start at 0
+ * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
  */
-#define CFG_SDRAM_BASE		0x00000000
-#define CFG_SDRAM_SIZE		4	/* SDRAM size in MB */
-#define CFG_FLASH_BASE		0xffe00000
+#define CONFIG_SYS_SDRAM_BASE		0x00000000
+#define CONFIG_SYS_SDRAM_SIZE		4	/* SDRAM size in MB */
+#define CONFIG_SYS_FLASH_BASE		0xffe00000
 
 #ifdef	CONFIG_MONITOR_IS_IN_RAM
-#define CFG_MONITOR_BASE	0x20000
+#define CONFIG_SYS_MONITOR_BASE	0x20000
 #else
-#define CFG_MONITOR_BASE	(CFG_FLASH_BASE + 0x400)
+#define CONFIG_SYS_MONITOR_BASE	(CONFIG_SYS_FLASH_BASE + 0x400)
 #endif
 
-#define CFG_MONITOR_LEN		0x20000
-#define CFG_MALLOC_LEN		(256 << 10)
-#define CFG_BOOTPARAMS_LEN	64*1024
+#define CONFIG_SYS_MONITOR_LEN		0x20000
+#define CONFIG_SYS_MALLOC_LEN		(256 << 10)
+#define CONFIG_SYS_BOOTPARAMS_LEN	64*1024
 
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization ??
  */
-#define CFG_BOOTMAPSZ		(CFG_SDRAM_BASE + (CFG_SDRAM_SIZE << 20))
+#define CONFIG_SYS_BOOTMAPSZ		(CONFIG_SYS_SDRAM_BASE + (CONFIG_SYS_SDRAM_SIZE << 20))
 
-/*-----------------------------------------------------------------------
+/*
  * FLASH organization
  */
-#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks           */
-#define CFG_MAX_FLASH_SECT	11	/* max number of sectors on one chip    */
-#define CFG_FLASH_ERASE_TOUT	1000
+#define CONFIG_SYS_FLASH_CFI
+#ifdef CONFIG_SYS_FLASH_CFI
+#	define CONFIG_FLASH_CFI_DRIVER	1
+#	define CONFIG_SYS_FLASH_SIZE		0x800000	/* Max size that the board might have */
+#	define CONFIG_SYS_FLASH_CFI_WIDTH	FLASH_CFI_16BIT
+#	define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks */
+#	define CONFIG_SYS_MAX_FLASH_SECT	137	/* max number of sectors on one chip */
+#	define CONFIG_SYS_FLASH_PROTECTION	/* "Real" (hardware) sectors protection */
+#endif
 
 /*-----------------------------------------------------------------------
  * Cache Configuration
  */
-#define CFG_CACHELINE_SIZE	16
+#define CONFIG_SYS_CACHELINE_SIZE	16
 
 /*-----------------------------------------------------------------------
  * Memory bank definitions
  */
-#define CFG_BR0_PRELIM		0xFFE00201
-#define CFG_OR0_PRELIM		0xFFE00014
-#define CFG_BR1_PRELIM		0
-#define CFG_OR1_PRELIM		0
-#define CFG_BR2_PRELIM		0x30000001
-#define CFG_OR2_PRELIM		0xFFF80000
-#define CFG_BR3_PRELIM		0
-#define CFG_OR3_PRELIM		0
-#define CFG_BR4_PRELIM		0
-#define CFG_OR4_PRELIM		0
-#define CFG_BR5_PRELIM		0
-#define CFG_OR5_PRELIM		0
-#define CFG_BR6_PRELIM		0
-#define CFG_OR6_PRELIM		0
-#define CFG_BR7_PRELIM		0x00000701
-#define CFG_OR7_PRELIM		0xFFC0007C
+#define CONFIG_SYS_BR0_PRELIM		0xFFE00201
+#define CONFIG_SYS_OR0_PRELIM		0xFFE00014
+#define CONFIG_SYS_BR1_PRELIM		0
+#define CONFIG_SYS_OR1_PRELIM		0
+#define CONFIG_SYS_BR2_PRELIM		0x30000001
+#define CONFIG_SYS_OR2_PRELIM		0xFFF80000
+#define CONFIG_SYS_BR3_PRELIM		0
+#define CONFIG_SYS_OR3_PRELIM		0
+#define CONFIG_SYS_BR4_PRELIM		0
+#define CONFIG_SYS_OR4_PRELIM		0
+#define CONFIG_SYS_BR5_PRELIM		0
+#define CONFIG_SYS_OR5_PRELIM		0
+#define CONFIG_SYS_BR6_PRELIM		0
+#define CONFIG_SYS_OR6_PRELIM		0
+#define CONFIG_SYS_BR7_PRELIM		0x00000701
+#define CONFIG_SYS_OR7_PRELIM		0xFFC0007C
 
 /*-----------------------------------------------------------------------
  * Port configuration
  */
-#define CFG_PACNT		0x00000000
-#define CFG_PADDR		0x0000
-#define CFG_PADAT		0x0000
-#define CFG_PBCNT		0x55554155	/* Ethernet/UART configuration */
-#define CFG_PBDDR		0x0000
-#define CFG_PBDAT		0x0000
-#define CFG_PDCNT		0x00000000
+#define CONFIG_SYS_PACNT		0x00000000
+#define CONFIG_SYS_PADDR		0x0000
+#define CONFIG_SYS_PADAT		0x0000
+#define CONFIG_SYS_PBCNT		0x55554155	/* Ethernet/UART configuration */
+#define CONFIG_SYS_PBDDR		0x0000
+#define CONFIG_SYS_PBDAT		0x0000
+#define CONFIG_SYS_PDCNT		0x00000000
 #endif				/* _M5272C3_H */
diff --git a/include/configs/M5275EVB.h b/include/configs/M5275EVB.h
index 430af6bfa..db48d7608 100644
--- a/include/configs/M5275EVB.h
+++ b/include/configs/M5275EVB.h
@@ -44,22 +44,22 @@
 #define CONFIG_MCFTMR
 
 #define CONFIG_MCFUART
-#define CFG_UART_PORT		(0)
+#define CONFIG_SYS_UART_PORT		(0)
 #define CONFIG_BAUDRATE		115200
-#define CFG_BAUDRATE_TABLE	{ 9600 , 19200 , 38400 , 57600, 115200 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600 , 19200 , 38400 , 57600, 115200 }
 
 /* Configuration for environment
  * Environment is embedded in u-boot in the second sector of the flash
  */
 #ifndef CONFIG_MONITOR_IS_IN_RAM
-#define CFG_ENV_OFFSET		0x4000
-#define CFG_ENV_SECT_SIZE	0x2000
-#define CFG_ENV_IS_IN_FLASH	1
-#define CFG_ENV_IS_EMBEDDED	1
+#define CONFIG_ENV_OFFSET		0x4000
+#define CONFIG_ENV_SECT_SIZE	0x2000
+#define CONFIG_ENV_IS_IN_FLASH	1
+#define CONFIG_ENV_IS_EMBEDDED	1
 #else
-#define CFG_ENV_ADDR		0xffe04000
-#define CFG_ENV_SECT_SIZE	0x2000
-#define CFG_ENV_IS_IN_FLASH	1
+#define CONFIG_ENV_ADDR		0xffe04000
+#define CONFIG_ENV_SECT_SIZE	0x2000
+#define CONFIG_ENV_IS_IN_FLASH	1
 #endif
 
 /*
@@ -90,22 +90,22 @@
 #define CONFIG_NET_MULTI	1
 #define CONFIG_MII		1
 #define CONFIG_MII_INIT		1
-#define CFG_DISCOVER_PHY
-#define CFG_RX_ETH_BUFFER	8
-#define CFG_FAULT_ECHO_LINK_DOWN
-#define CFG_FEC0_PINMUX		0
-#define CFG_FEC0_MIIBASE	CFG_FEC0_IOBASE
-#define CFG_FEC1_PINMUX		0
-#define CFG_FEC1_MIIBASE	CFG_FEC1_IOBASE
+#define CONFIG_SYS_DISCOVER_PHY
+#define CONFIG_SYS_RX_ETH_BUFFER	8
+#define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
+#define CONFIG_SYS_FEC0_PINMUX		0
+#define CONFIG_SYS_FEC0_MIIBASE	CONFIG_SYS_FEC0_IOBASE
+#define CONFIG_SYS_FEC1_PINMUX		0
+#define CONFIG_SYS_FEC1_MIIBASE	CONFIG_SYS_FEC1_IOBASE
 #define MCFFEC_TOUT_LOOP	50000
 #define CONFIG_HAS_ETH1
-/* If CFG_DISCOVER_PHY is not defined - hardcoded */
-#ifndef CFG_DISCOVER_PHY
+/* If CONFIG_SYS_DISCOVER_PHY is not defined - hardcoded */
+#ifndef CONFIG_SYS_DISCOVER_PHY
 #define FECDUPLEX		FULL
 #define FECSPEED		_100BASET
 #else
-#ifndef CFG_FAULT_ECHO_LINK_DOWN
-#define CFG_FAULT_ECHO_LINK_DOWN
+#ifndef CONFIG_SYS_FAULT_ECHO_LINK_DOWN
+#define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
 #endif
 #endif
 #endif
@@ -114,40 +114,40 @@
 #define CONFIG_FSL_I2C
 #define CONFIG_HARD_I2C		/* I2C with hw support */
 #undef CONFIG_SOFT_I2C
-#define CFG_I2C_SPEED		80000
-#define CFG_I2C_SLAVE		0x7F
-#define CFG_I2C_OFFSET		0x00000300
-#define CFG_IMMR		CFG_MBAR
-#define CFG_I2C_PINMUX_REG	(gpio_reg->par_feci2c)
-#define CFG_I2C_PINMUX_CLR	(0xFFF0)
-#define CFG_I2C_PINMUX_SET	(0x000F)
+#define CONFIG_SYS_I2C_SPEED		80000
+#define CONFIG_SYS_I2C_SLAVE		0x7F
+#define CONFIG_SYS_I2C_OFFSET		0x00000300
+#define CONFIG_SYS_IMMR		CONFIG_SYS_MBAR
+#define CONFIG_SYS_I2C_PINMUX_REG	(gpio_reg->par_feci2c)
+#define CONFIG_SYS_I2C_PINMUX_CLR	(0xFFF0)
+#define CONFIG_SYS_I2C_PINMUX_SET	(0x000F)
 
 #ifdef CONFIG_MCFFEC
 #define CONFIG_ETHADDR		00:06:3b:01:41:55
 #define CONFIG_ETH1ADDR		00:0e:0c:bc:e5:60
 #endif
 
-#define CFG_PROMPT		"-> "
-#define CFG_LONGHELP		/* undef to save memory	*/
+#define CONFIG_SYS_PROMPT		"-> "
+#define CONFIG_SYS_LONGHELP		/* undef to save memory	*/
 
 #if (CONFIG_CMD_KGDB)
-#	define CFG_CBSIZE	1024
+#	define CONFIG_SYS_CBSIZE	1024
 #else
-#	define CFG_CBSIZE	256
+#	define CONFIG_SYS_CBSIZE	256
 #endif
-#define CFG_PBSIZE		(CFG_CBSIZE + sizeof(CFG_PROMPT) + 16)
-#define CFG_MAXARGS		16
-#define CFG_BARGSIZE		CFG_CBSIZE
+#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
+#define CONFIG_SYS_MAXARGS		16
+#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE
 
-#define CFG_LOAD_ADDR		0x800000
+#define CONFIG_SYS_LOAD_ADDR		0x800000
 
 #define CONFIG_BOOTDELAY	5
 #define CONFIG_BOOTCOMMAND	"bootm ffe40000"
-#define CFG_MEMTEST_START	0x400
-#define CFG_MEMTEST_END		0x380000
+#define CONFIG_SYS_MEMTEST_START	0x400
+#define CONFIG_SYS_MEMTEST_END		0x380000
 
-#define CFG_HZ			1000
-#define CFG_CLK			150000000
+#define CONFIG_SYS_HZ			1000
+#define CONFIG_SYS_CLK			150000000
 
 /*
  * Low Level Configuration Settings
@@ -155,73 +155,73 @@
  * You should know what you are doing if you make changes here.
  */
 
-#define CFG_MBAR		0x40000000
+#define CONFIG_SYS_MBAR		0x40000000
 
 /*-----------------------------------------------------------------------
  * Definitions for initial stack pointer and data area (in DPRAM)
  */
-#define CFG_INIT_RAM_ADDR	0x20000000
-#define CFG_INIT_RAM_END	0x10000	/* End of used area in internal SRAM */
-#define CFG_GBL_DATA_SIZE	1000	/* bytes reserved for initial data */
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_INIT_RAM_ADDR	0x20000000
+#define CONFIG_SYS_INIT_RAM_END	0x10000	/* End of used area in internal SRAM */
+#define CONFIG_SYS_GBL_DATA_SIZE	1000	/* bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
 /*-----------------------------------------------------------------------
  * Start addresses for the final memory configuration
  * (Set up by the startup code)
- * Please note that CFG_SDRAM_BASE _must_ start at 0
+ * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
  */
-#define CFG_SDRAM_BASE		0x00000000
-#define CFG_SDRAM_SIZE		16	/* SDRAM size in MB */
-#define CFG_FLASH_BASE		0xffe00000
+#define CONFIG_SYS_SDRAM_BASE		0x00000000
+#define CONFIG_SYS_SDRAM_SIZE		16	/* SDRAM size in MB */
+#define CONFIG_SYS_FLASH_BASE		CONFIG_SYS_CS0_BASE
 
 #ifdef CONFIG_MONITOR_IS_IN_RAM
-#define CFG_MONITOR_BASE	0x20000
+#define CONFIG_SYS_MONITOR_BASE	0x20000
 #else
-#define CFG_MONITOR_BASE	(CFG_FLASH_BASE + 0x400)
+#define CONFIG_SYS_MONITOR_BASE	(CONFIG_SYS_FLASH_BASE + 0x400)
 #endif
 
-#define CFG_MONITOR_LEN		0x20000
-#define CFG_MALLOC_LEN		(256 << 10)
-#define CFG_BOOTPARAMS_LEN	64*1024
+#define CONFIG_SYS_MONITOR_LEN		0x20000
+#define CONFIG_SYS_MALLOC_LEN		(256 << 10)
+#define CONFIG_SYS_BOOTPARAMS_LEN	64*1024
 
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization ??
  */
-#define CFG_BOOTMAPSZ		(8 << 20)	/* Initial mmap for Linux */
+#define CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial mmap for Linux */
 
 /*-----------------------------------------------------------------------
  * FLASH organization
  */
-#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks */
-#define CFG_MAX_FLASH_SECT	11	/* max number of sectors on one chip */
-#define CFG_FLASH_ERASE_TOUT	1000
+#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks */
+#define CONFIG_SYS_MAX_FLASH_SECT	11	/* max number of sectors on one chip */
+#define CONFIG_SYS_FLASH_ERASE_TOUT	1000
 
-#define CFG_FLASH_CFI		1
+#define CONFIG_SYS_FLASH_CFI		1
 #define CONFIG_FLASH_CFI_DRIVER	1
-#define CFG_FLASH_SIZE		0x200000
+#define CONFIG_SYS_FLASH_SIZE		0x200000
 
 /*-----------------------------------------------------------------------
  * Cache Configuration
  */
-#define CFG_CACHELINE_SIZE	16
+#define CONFIG_SYS_CACHELINE_SIZE	16
 
 /*-----------------------------------------------------------------------
  * Memory bank definitions
  */
-#define CFG_AR0_PRELIM		(CFG_FLASH_BASE >> 16)
-#define CFG_CR0_PRELIM		0x1980
-#define CFG_MR0_PRELIM		0x001F0001
+#define CONFIG_SYS_CS0_BASE		0xffe00000
+#define CONFIG_SYS_CS0_CTRL		0x00001980
+#define CONFIG_SYS_CS0_MASK		0x001F0001
 
-#define CFG_AR1_PRELIM		0x3000
-#define CFG_CR1_PRELIM		0x1900
-#define CFG_MR1_PRELIM		0x00070001
+#define CONFIG_SYS_CS1_BASE		0x30000000
+#define CONFIG_SYS_CS1_CTRL		0x00001900
+#define CONFIG_SYS_CS1_MASK		0x00070001
 
 /*-----------------------------------------------------------------------
  * Port configuration
  */
-#define CFG_FECI2C		0x0FA0
+#define CONFIG_SYS_FECI2C		0x0FA0
 
 #endif	/* _M5275EVB_H */
diff --git a/include/configs/M5282EVB.h b/include/configs/M5282EVB.h
index eb59c250d..15590cfcd 100644
--- a/include/configs/M5282EVB.h
+++ b/include/configs/M5282EVB.h
@@ -39,18 +39,18 @@
 #define CONFIG_MCFTMR
 
 #define CONFIG_MCFUART
-#define CFG_UART_PORT		(0)
+#define CONFIG_SYS_UART_PORT		(0)
 #define CONFIG_BAUDRATE		115200
-#define CFG_BAUDRATE_TABLE	{ 9600 , 19200 , 38400 , 57600, 115200 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600 , 19200 , 38400 , 57600, 115200 }
 
 #undef	CONFIG_MONITOR_IS_IN_RAM	/* define if monitor is started from a pre-loader */
 
 /* Configuration for environment
  * Environment is embedded in u-boot in the second sector of the flash
  */
-#define CFG_ENV_ADDR		0xffe04000
-#define CFG_ENV_SIZE		0x2000
-#define CFG_ENV_IS_IN_FLASH	1
+#define CONFIG_ENV_ADDR		0xffe04000
+#define CONFIG_ENV_SIZE		0x2000
+#define CONFIG_ENV_IS_IN_FLASH	1
 
 /*
  * BOOTP options
@@ -76,22 +76,22 @@
 #	define CONFIG_NET_MULTI		1
 #	define CONFIG_MII		1
 #	define CONFIG_MII_INIT		1
-#	define CFG_DISCOVER_PHY
-#	define CFG_RX_ETH_BUFFER	8
-#	define CFG_FAULT_ECHO_LINK_DOWN
+#	define CONFIG_SYS_DISCOVER_PHY
+#	define CONFIG_SYS_RX_ETH_BUFFER	8
+#	define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
 
-#	define CFG_FEC0_PINMUX		0
-#	define CFG_FEC0_MIIBASE		CFG_FEC0_IOBASE
+#	define CONFIG_SYS_FEC0_PINMUX		0
+#	define CONFIG_SYS_FEC0_MIIBASE		CONFIG_SYS_FEC0_IOBASE
 #	define MCFFEC_TOUT_LOOP		50000
-/* If CFG_DISCOVER_PHY is not defined - hardcoded */
-#	ifndef CFG_DISCOVER_PHY
+/* If CONFIG_SYS_DISCOVER_PHY is not defined - hardcoded */
+#	ifndef CONFIG_SYS_DISCOVER_PHY
 #		define FECDUPLEX	FULL
 #		define FECSPEED		_100BASET
 #	else
-#		ifndef CFG_FAULT_ECHO_LINK_DOWN
-#			define CFG_FAULT_ECHO_LINK_DOWN
+#		ifndef CONFIG_SYS_FAULT_ECHO_LINK_DOWN
+#			define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
 #		endif
-#	endif			/* CFG_DISCOVER_PHY */
+#	endif			/* CONFIG_SYS_DISCOVER_PHY */
 #endif
 
 #define CONFIG_BOOTDELAY	5
@@ -117,135 +117,127 @@
 	"save\0"				\
 	""
 
-#define CFG_PROMPT		"-> "
-#define	CFG_LONGHELP		/* undef to save memory         */
+#define CONFIG_SYS_PROMPT		"-> "
+#define	CONFIG_SYS_LONGHELP		/* undef to save memory         */
 
 #if defined(CONFIG_CMD_KGDB)
-#define	CFG_CBSIZE		1024	/* Console I/O Buffer Size      */
+#define	CONFIG_SYS_CBSIZE		1024	/* Console I/O Buffer Size      */
 #else
-#define	CFG_CBSIZE		256	/* Console I/O Buffer Size      */
+#define	CONFIG_SYS_CBSIZE		256	/* Console I/O Buffer Size      */
 #endif
-#define	CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16)	/* Print Buffer Size */
-#define	CFG_MAXARGS		16	/* max number of command args   */
-#define CFG_BARGSIZE		CFG_CBSIZE	/* Boot Argument Buffer Size    */
+#define	CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)	/* Print Buffer Size */
+#define	CONFIG_SYS_MAXARGS		16	/* max number of command args   */
+#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size    */
 
-#define CFG_LOAD_ADDR		0x20000
+#define CONFIG_SYS_LOAD_ADDR		0x20000
 
-#define CFG_MEMTEST_START	0x400
-#define CFG_MEMTEST_END		0x380000
+#define CONFIG_SYS_MEMTEST_START	0x400
+#define CONFIG_SYS_MEMTEST_END		0x380000
 
-#define CFG_HZ			1000
-#define	CFG_CLK			64000000
+#define CONFIG_SYS_HZ			1000
+#define	CONFIG_SYS_CLK			64000000
 
 /* PLL Configuration: Ext Clock * 6 (see table 9-4 of MCF user manual) */
 
-#define CFG_MFD			0x02	/* PLL Multiplication Factor Devider */
-#define CFG_RFD			0x00	/* PLL Reduce Frecuency Devider */
+#define CONFIG_SYS_MFD			0x02	/* PLL Multiplication Factor Devider */
+#define CONFIG_SYS_RFD			0x00	/* PLL Reduce Frecuency Devider */
 
 /*
  * Low Level Configuration Settings
  * (address mappings, register initial values, etc.)
  * You should know what you are doing if you make changes here.
  */
-#define	CFG_MBAR		0x40000000
+#define	CONFIG_SYS_MBAR		0x40000000
 
 /*-----------------------------------------------------------------------
  * Definitions for initial stack pointer and data area (in DPRAM)
  */
-#define CFG_INIT_RAM_ADDR	0x20000000
-#define CFG_INIT_RAM_END	0x10000	/* End of used area in internal SRAM    */
-#define CFG_GBL_DATA_SIZE	64	/* size in bytes reserved for initial data */
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_INIT_RAM_ADDR	0x20000000
+#define CONFIG_SYS_INIT_RAM_END	0x10000	/* End of used area in internal SRAM    */
+#define CONFIG_SYS_GBL_DATA_SIZE	64	/* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
 /*-----------------------------------------------------------------------
  * Start addresses for the final memory configuration
  * (Set up by the startup code)
- * Please note that CFG_SDRAM_BASE _must_ start at 0
+ * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
  */
-#define CFG_SDRAM_BASE		0x00000000
-#define	CFG_SDRAM_SIZE		16	/* SDRAM size in MB */
-#define CFG_FLASH_BASE		0xffe00000
-#define	CFG_INT_FLASH_BASE	0xf0000000
-#define CFG_INT_FLASH_ENABLE	0x21
+#define CONFIG_SYS_SDRAM_BASE		0x00000000
+#define	CONFIG_SYS_SDRAM_SIZE		16	/* SDRAM size in MB */
+#define CONFIG_SYS_FLASH_BASE		CONFIG_SYS_CS0_BASE
+#define	CONFIG_SYS_INT_FLASH_BASE	0xf0000000
+#define CONFIG_SYS_INT_FLASH_ENABLE	0x21
 
 /* If M5282 port is fully implemented the monitor base will be behind
  * the vector table. */
-#if (TEXT_BASE != CFG_INT_FLASH_BASE)
-#define CFG_MONITOR_BASE	(CFG_FLASH_BASE + 0x400)
+#if (TEXT_BASE != CONFIG_SYS_INT_FLASH_BASE)
+#define CONFIG_SYS_MONITOR_BASE	(CONFIG_SYS_FLASH_BASE + 0x400)
 #else
-#define CFG_MONITOR_BASE	(TEXT_BASE + 0x418)	/* 24 Byte for CFM-Config */
+#define CONFIG_SYS_MONITOR_BASE	(TEXT_BASE + 0x418)	/* 24 Byte for CFM-Config */
 #endif
 
-#define CFG_MONITOR_LEN		0x20000
-#define CFG_MALLOC_LEN		(256 << 10)
-#define CFG_BOOTPARAMS_LEN	64*1024
+#define CONFIG_SYS_MONITOR_LEN		0x20000
+#define CONFIG_SYS_MALLOC_LEN		(256 << 10)
+#define CONFIG_SYS_BOOTPARAMS_LEN	64*1024
 
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization ??
  */
-#define CFG_BOOTMAPSZ		(CFG_SDRAM_BASE + (CFG_SDRAM_SIZE << 20))
+#define CONFIG_SYS_BOOTMAPSZ		(CONFIG_SYS_SDRAM_BASE + (CONFIG_SYS_SDRAM_SIZE << 20))
 
 /*-----------------------------------------------------------------------
  * FLASH organization
  */
-#define CFG_FLASH_CFI
-#ifdef CFG_FLASH_CFI
+#define CONFIG_SYS_FLASH_CFI
+#ifdef CONFIG_SYS_FLASH_CFI
 
 #	define CONFIG_FLASH_CFI_DRIVER	1
-#	define CFG_FLASH_SIZE		0x1000000	/* Max size that the board might have */
-#	define CFG_FLASH_CFI_WIDTH	FLASH_CFI_16BIT
-#	define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks */
-#	define CFG_MAX_FLASH_SECT	137	/* max number of sectors on one chip */
-#	define CFG_FLASH_PROTECTION	/* "Real" (hardware) sectors protection */
-#	define CFG_FLASH_CHECKSUM
-#	define CFG_FLASH_BANKS_LIST	{ CFG_FLASH_BASE }
+#	define CONFIG_SYS_FLASH_SIZE		0x1000000	/* Max size that the board might have */
+#	define CONFIG_SYS_FLASH_CFI_WIDTH	FLASH_CFI_16BIT
+#	define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks */
+#	define CONFIG_SYS_MAX_FLASH_SECT	137	/* max number of sectors on one chip */
+#	define CONFIG_SYS_FLASH_PROTECTION	/* "Real" (hardware) sectors protection */
+#	define CONFIG_SYS_FLASH_CHECKSUM
+#	define CONFIG_SYS_FLASH_BANKS_LIST	{ CONFIG_SYS_FLASH_BASE }
 #endif
 
 /*-----------------------------------------------------------------------
  * Cache Configuration
  */
-#define CFG_CACHELINE_SIZE	16
+#define CONFIG_SYS_CACHELINE_SIZE	16
 
 /*-----------------------------------------------------------------------
  * Memory bank definitions
  */
-#define CFG_CS0_BASE		CFG_FLASH_BASE
-#define CFG_CS0_SIZE		2*1024*1024
-#define CFG_CS0_WIDTH		16
-#define CFG_CS0_RO		0
-#define CFG_CS0_WS		6
-/*
-#define CFG_CS3_BASE		0xE0000000
-#define CFG_CS3_SIZE		1*1024*1024
-#define CFG_CS3_WIDTH		16
-#define CFG_CS3_RO		0
-#define CFG_CS3_WS		6
-*/
+#define CONFIG_SYS_CS0_BASE		0xFFE00000
+#define CONFIG_SYS_CS0_CTRL		0x00001980
+#define CONFIG_SYS_CS0_MASK		0x001F0001
+
 /*-----------------------------------------------------------------------
  * Port configuration
  */
-#define CFG_PACNT		0x0000000	/* Port A D[31:24] */
-#define CFG_PADDR		0x0000000
-#define CFG_PADAT		0x0000000
-
-#define CFG_PBCNT		0x0000000	/* Port B D[23:16] */
-#define CFG_PBDDR		0x0000000
-#define CFG_PBDAT		0x0000000
-
-#define CFG_PCCNT		0x0000000	/* Port C D[15:08] */
-#define CFG_PCDDR		0x0000000
-#define CFG_PCDAT		0x0000000
-
-#define CFG_PDCNT		0x0000000	/* Port D D[07:00] */
-#define CFG_PCDDR		0x0000000
-#define CFG_PCDAT		0x0000000
-
-#define CFG_PEHLPAR		0xC0
-#define CFG_PUAPAR		0x0F	/* UA0..UA3 = Uart 0 +1 */
-#define CFG_DDRUA		0x05
-#define CFG_PJPAR		0xFF;
+#define CONFIG_SYS_PACNT		0x0000000	/* Port A D[31:24] */
+#define CONFIG_SYS_PADDR		0x0000000
+#define CONFIG_SYS_PADAT		0x0000000
+
+#define CONFIG_SYS_PBCNT		0x0000000	/* Port B D[23:16] */
+#define CONFIG_SYS_PBDDR		0x0000000
+#define CONFIG_SYS_PBDAT		0x0000000
+
+#define CONFIG_SYS_PCCNT		0x0000000	/* Port C D[15:08] */
+#define CONFIG_SYS_PCDDR		0x0000000
+#define CONFIG_SYS_PCDAT		0x0000000
+
+#define CONFIG_SYS_PDCNT		0x0000000	/* Port D D[07:00] */
+#define CONFIG_SYS_PCDDR		0x0000000
+#define CONFIG_SYS_PCDAT		0x0000000
+
+#define CONFIG_SYS_PEHLPAR		0xC0
+#define CONFIG_SYS_PUAPAR		0x0F	/* UA0..UA3 = Uart 0 +1 */
+#define CONFIG_SYS_DDRUA		0x05
+#define CONFIG_SYS_PJPAR		0xFF
 
 #endif				/* _CONFIG_M5282EVB_H */
diff --git a/include/configs/M53017EVB.h b/include/configs/M53017EVB.h
new file mode 100644
index 000000000..df54c606b
--- /dev/null
+++ b/include/configs/M53017EVB.h
@@ -0,0 +1,247 @@
+/*
+ * Configuation settings for the Freescale MCF53017EVB.
+ *
+ * Copyright (C) 2004-2008 Freescale Semiconductor, Inc.
+ * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * board/config.h - configuration options, board specific
+ */
+
+#ifndef _M53017EVB_H
+#define _M53017EVB_H
+
+/*
+ * High Level Configuration Options
+ * (easy to change)
+ */
+#define CONFIG_MCF5301x		/* define processor family */
+#define CONFIG_M53015		/* define processor type */
+
+#define CONFIG_MCFUART
+#define CONFIG_SYS_UART_PORT		(0)
+#define CONFIG_BAUDRATE			115200
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600 , 19200 , 38400 , 57600, 115200 }
+
+#undef CONFIG_WATCHDOG
+#define CONFIG_WATCHDOG_TIMEOUT		5000
+
+/* Command line configuration */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_CACHE
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_FLASH
+#undef CONFIG_CMD_I2C
+#define CONFIG_CMD_MEMORY
+#define CONFIG_CMD_MISC
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_REGINFO
+
+#define CONFIG_SYS_UNIFY_CACHE
+
+#define CONFIG_MCFFEC
+#ifdef CONFIG_MCFFEC
+#	define CONFIG_NET_MULTI		1
+#	define CONFIG_MII		1
+#	define CONFIG_MII_INIT		1
+#	define CONFIG_SYS_DISCOVER_PHY
+#	define CONFIG_SYS_RX_ETH_BUFFER	8
+#	define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
+#	define CONFIG_HAS_ETH1
+
+#	define CONFIG_SYS_FEC0_PINMUX	0
+#	define CONFIG_SYS_FEC0_MIIBASE	CONFIG_SYS_FEC0_IOBASE
+#	define CONFIG_SYS_FEC1_PINMUX	0
+#	define CONFIG_SYS_FEC1_MIIBASE	CONFIG_SYS_FEC1_IOBASE
+#	define MCFFEC_TOUT_LOOP		50000
+/* If CONFIG_SYS_DISCOVER_PHY is not defined - hardcoded */
+#	ifndef CONFIG_SYS_DISCOVER_PHY
+#		define FECDUPLEX	FULL
+#		define FECSPEED		_100BASET
+#	else
+#		ifndef CONFIG_SYS_FAULT_ECHO_LINK_DOWN
+#			define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
+#		endif
+#	endif			/* CONFIG_SYS_DISCOVER_PHY */
+#endif
+
+#define CONFIG_MCFRTC
+#undef RTC_DEBUG
+#define CONFIG_SYS_RTC_CNT		(0x8000)
+#define CONFIG_SYS_RTC_SETUP		(RTC_OCEN_OSCBYP | RTC_OCEN_CLKEN)
+
+/* Timer */
+#define CONFIG_MCFTMR
+#undef CONFIG_MCFPIT
+
+/* I2C */
+#define CONFIG_FSL_I2C
+#define CONFIG_HARD_I2C			/* I2C with hw support */
+#undef CONFIG_SOFT_I2C			/* I2C bit-banged */
+#define CONFIG_SYS_I2C_SPEED		80000
+#define CONFIG_SYS_I2C_SLAVE		0x7F
+#define CONFIG_SYS_I2C_OFFSET		0x58000
+#define CONFIG_SYS_IMMR			CONFIG_SYS_MBAR
+
+#define CONFIG_BOOTDELAY		1	/* autoboot after 5 seconds */
+#define CONFIG_UDP_CHECKSUM
+
+#ifdef CONFIG_MCFFEC
+#	define CONFIG_ETHADDR	00:e0:0c:bc:e5:60
+#	define CONFIG_ETH1ADDR	00:e0:0c:bc:e5:61
+#	define CONFIG_IPADDR	192.162.1.2
+#	define CONFIG_NETMASK	255.255.255.0
+#	define CONFIG_SERVERIP	192.162.1.1
+#	define CONFIG_GATEWAYIP	192.162.1.1
+#	define CONFIG_OVERWRITE_ETHADDR_ONCE
+#endif				/* FEC_ENET */
+
+#define CONFIG_HOSTNAME		M53017
+#define CONFIG_EXTRA_ENV_SETTINGS		\
+	"netdev=eth0\0"				\
+	"loadaddr=40010000\0"			\
+	"u-boot=u-boot.bin\0"			\
+	"load=tftp ${loadaddr) ${u-boot}\0"	\
+	"upd=run load; run prog\0"		\
+	"prog=prot off 0 3ffff;"		\
+	"era 0 3ffff;"				\
+	"cp.b ${loadaddr} 0 ${filesize};"	\
+	"save\0"				\
+	""
+
+#define CONFIG_PRAM		512	/* 512 KB */
+#define CONFIG_SYS_PROMPT	"-> "
+#define CONFIG_SYS_LONGHELP	/* undef to save memory */
+
+#ifdef CONFIG_CMD_KGDB
+#	define CONFIG_SYS_CBSIZE	1024	/* Console I/O Buffer Size */
+#else
+#	define CONFIG_SYS_CBSIZE	256	/* Console I/O Buffer Size */
+#endif
+
+#define CONFIG_SYS_PBSIZE	(CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)	/* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS	16		/* max number of cmd args */
+#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Arg Buf Sz */
+#define CONFIG_SYS_LOAD_ADDR	0x40010000
+
+#define CONFIG_SYS_HZ		1000
+#define CONFIG_SYS_CLK		80000000
+#define CONFIG_SYS_CPU_CLK	CONFIG_SYS_CLK * 3
+
+#define CONFIG_SYS_MBAR		0xFC000000
+
+/*
+ * Low Level Configuration Settings
+ * (address mappings, register initial values, etc.)
+ * You should know what you are doing if you make changes here.
+ */
+/*
+ * Definitions for initial stack pointer and data area (in DPRAM)
+ */
+#define CONFIG_SYS_INIT_RAM_ADDR	0x80000000
+#define CONFIG_SYS_INIT_RAM_END		0x20000	/* End of used area in internal SRAM */
+#define CONFIG_SYS_INIT_RAM_CTRL	0x21
+#define CONFIG_SYS_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET	((CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) - 0x10)
+#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
+
+/*
+ * Start addresses for the final memory configuration
+ * (Set up by the startup code)
+ * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
+ */
+#define CONFIG_SYS_SDRAM_BASE		0x40000000
+#define CONFIG_SYS_SDRAM_SIZE		64	/* SDRAM size in MB */
+#define CONFIG_SYS_SDRAM_CFG1		0x43711630
+#define CONFIG_SYS_SDRAM_CFG2		0x56670000
+#define CONFIG_SYS_SDRAM_CTRL		0xE1002000
+#define CONFIG_SYS_SDRAM_EMOD		0x80010000
+#define CONFIG_SYS_SDRAM_MODE		0x00CD0000
+
+#define CONFIG_SYS_MEMTEST_START	CONFIG_SYS_SDRAM_BASE + 0x400
+#define CONFIG_SYS_MEMTEST_END		((CONFIG_SYS_SDRAM_SIZE - 3) << 20)
+
+#define CONFIG_SYS_MONITOR_BASE		(CONFIG_SYS_FLASH_BASE + 0x400)
+#define CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor */
+
+#define CONFIG_SYS_BOOTPARAMS_LEN	64*1024
+#define CONFIG_SYS_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc() */
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization ??
+ */
+#define CONFIG_SYS_BOOTMAPSZ		(CONFIG_SYS_SDRAM_BASE + (CONFIG_SYS_SDRAM_SIZE << 20))
+
+/*-----------------------------------------------------------------------
+ * FLASH organization
+ */
+#define CONFIG_SYS_FLASH_CFI
+#ifdef CONFIG_SYS_FLASH_CFI
+#	define CONFIG_FLASH_CFI_DRIVER		1
+#	define CONFIG_SYS_FLASH_SIZE		0x800000	/* Max size that the board might have */
+#	define CONFIG_SYS_FLASH_CFI_WIDTH	FLASH_CFI_16BIT
+#	define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks */
+#	define CONFIG_SYS_MAX_FLASH_SECT	137	/* max number of sectors on one chip */
+#	define CONFIG_SYS_FLASH_PROTECTION	/* "Real" (hardware) sectors protection */
+#endif
+
+#define CONFIG_SYS_FLASH_BASE		CONFIG_SYS_CS0_BASE
+
+/* Configuration for environment
+ * Environment is embedded in u-boot in the second sector of the flash
+ */
+#define CONFIG_ENV_OFFSET		0x8000
+#define CONFIG_ENV_SIZE			0x1000
+#define CONFIG_ENV_SECT_SIZE		0x8000
+#define CONFIG_ENV_IS_IN_FLASH		1
+
+/*-----------------------------------------------------------------------
+ * Cache Configuration
+ */
+#define CONFIG_SYS_CACHELINE_SIZE	16
+
+/*-----------------------------------------------------------------------
+ * Chipselect bank definitions
+ */
+/*
+ * CS0 - NOR Flash
+ * CS1 - Ext SRAM
+ * CS2 - Available
+ * CS3 - Available
+ * CS4 - Available
+ * CS5 - Available
+ */
+#define CONFIG_SYS_CS0_BASE		0
+#define CONFIG_SYS_CS0_MASK		0x00FF0001
+#define CONFIG_SYS_CS0_CTRL		0x00001FA0
+
+#define CONFIG_SYS_CS1_BASE		0xC0000000
+#define CONFIG_SYS_CS1_MASK		0x00070001
+#define CONFIG_SYS_CS1_CTRL		0x00001FA0
+
+#endif				/* _M53017EVB_H */
diff --git a/include/configs/M5329EVB.h b/include/configs/M5329EVB.h
index 58948a20a..c207947ff 100644
--- a/include/configs/M5329EVB.h
+++ b/include/configs/M5329EVB.h
@@ -38,9 +38,9 @@
 #define CONFIG_M5329		/* define processor type */
 
 #define CONFIG_MCFUART
-#define CFG_UART_PORT		(0)
+#define CONFIG_SYS_UART_PORT		(0)
 #define CONFIG_BAUDRATE		115200
-#define CFG_BAUDRATE_TABLE	{ 9600 , 19200 , 38400 , 57600, 115200 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600 , 19200 , 38400 , 57600, 115200 }
 
 #undef CONFIG_WATCHDOG
 #define CONFIG_WATCHDOG_TIMEOUT	5000	/* timeout in milliseconds, max timeout is 6.71sec */
@@ -64,29 +64,29 @@
 #      define CONFIG_CMD_NAND
 #endif
 
-#define CFG_UNIFY_CACHE
+#define CONFIG_SYS_UNIFY_CACHE
 
 #define CONFIG_MCFFEC
 #ifdef CONFIG_MCFFEC
 #	define CONFIG_NET_MULTI		1
 #	define CONFIG_MII		1
 #	define CONFIG_MII_INIT		1
-#	define CFG_DISCOVER_PHY
-#	define CFG_RX_ETH_BUFFER	8
-#	define CFG_FAULT_ECHO_LINK_DOWN
+#	define CONFIG_SYS_DISCOVER_PHY
+#	define CONFIG_SYS_RX_ETH_BUFFER	8
+#	define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
 
-#	define CFG_FEC0_PINMUX		0
-#	define CFG_FEC0_MIIBASE		CFG_FEC0_IOBASE
+#	define CONFIG_SYS_FEC0_PINMUX		0
+#	define CONFIG_SYS_FEC0_MIIBASE		CONFIG_SYS_FEC0_IOBASE
 #	define MCFFEC_TOUT_LOOP		50000
-/* If CFG_DISCOVER_PHY is not defined - hardcoded */
-#	ifndef CFG_DISCOVER_PHY
+/* If CONFIG_SYS_DISCOVER_PHY is not defined - hardcoded */
+#	ifndef CONFIG_SYS_DISCOVER_PHY
 #		define FECDUPLEX	FULL
 #		define FECSPEED		_100BASET
 #	else
-#		ifndef CFG_FAULT_ECHO_LINK_DOWN
-#			define CFG_FAULT_ECHO_LINK_DOWN
+#		ifndef CONFIG_SYS_FAULT_ECHO_LINK_DOWN
+#			define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
 #		endif
-#	endif			/* CFG_DISCOVER_PHY */
+#	endif			/* CONFIG_SYS_DISCOVER_PHY */
 #endif
 
 #define CONFIG_MCFRTC
@@ -100,10 +100,10 @@
 #define CONFIG_FSL_I2C
 #define CONFIG_HARD_I2C			/* I2C with hw support */
 #undef CONFIG_SOFT_I2C			/* I2C bit-banged */
-#define CFG_I2C_SPEED		80000
-#define CFG_I2C_SLAVE		0x7F
-#define CFG_I2C_OFFSET		0x58000
-#define CFG_IMMR		CFG_MBAR
+#define CONFIG_SYS_I2C_SPEED		80000
+#define CONFIG_SYS_I2C_SLAVE		0x7F
+#define CONFIG_SYS_I2C_OFFSET		0x58000
+#define CONFIG_SYS_IMMR		CONFIG_SYS_MBAR
 
 #define CONFIG_BOOTDELAY	1	/* autoboot after 5 seconds */
 #define CONFIG_UDP_CHECKSUM
@@ -131,27 +131,27 @@
 	""
 
 #define CONFIG_PRAM		512	/* 512 KB */
-#define CFG_PROMPT		"-> "
-#define CFG_LONGHELP		/* undef to save memory */
+#define CONFIG_SYS_PROMPT		"-> "
+#define CONFIG_SYS_LONGHELP		/* undef to save memory */
 
 #ifdef CONFIG_CMD_KGDB
-#	define CFG_CBSIZE	1024	/* Console I/O Buffer Size */
+#	define CONFIG_SYS_CBSIZE	1024	/* Console I/O Buffer Size */
 #else
-#	define CFG_CBSIZE	256	/* Console I/O Buffer Size */
+#	define CONFIG_SYS_CBSIZE	256	/* Console I/O Buffer Size */
 #endif
 
-#define CFG_PBSIZE			(CFG_CBSIZE+sizeof(CFG_PROMPT)+16)	/* Print Buffer Size */
-#define CFG_MAXARGS		16	/* max number of command args */
-#define CFG_BARGSIZE		CFG_CBSIZE	/* Boot Argument Buffer Size    */
-#define CFG_LOAD_ADDR		0x40010000
+#define CONFIG_SYS_PBSIZE			(CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)	/* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS		16	/* max number of command args */
+#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size    */
+#define CONFIG_SYS_LOAD_ADDR		0x40010000
 
-#define CFG_HZ			1000
-#define CFG_CLK			80000000
-#define CFG_CPU_CLK		CFG_CLK * 3
+#define CONFIG_SYS_HZ			1000
+#define CONFIG_SYS_CLK			80000000
+#define CONFIG_SYS_CPU_CLK		CONFIG_SYS_CLK * 3
 
-#define CFG_MBAR		0xFC000000
+#define CONFIG_SYS_MBAR		0xFC000000
 
-#define CFG_LATCH_ADDR		(CFG_CS1_BASE + 0x80000)
+#define CONFIG_SYS_LATCH_ADDR		(CONFIG_SYS_CS1_BASE + 0x80000)
 
 /*
  * Low Level Configuration Settings
@@ -161,82 +161,82 @@
 /*-----------------------------------------------------------------------
  * Definitions for initial stack pointer and data area (in DPRAM)
  */
-#define CFG_INIT_RAM_ADDR	0x80000000
-#define CFG_INIT_RAM_END	0x8000	/* End of used area in internal SRAM */
-#define CFG_INIT_RAM_CTRL	0x221
-#define CFG_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
-#define CFG_GBL_DATA_OFFSET	((CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) - 0x10)
-#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_INIT_RAM_ADDR	0x80000000
+#define CONFIG_SYS_INIT_RAM_END	0x8000	/* End of used area in internal SRAM */
+#define CONFIG_SYS_INIT_RAM_CTRL	0x221
+#define CONFIG_SYS_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET	((CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) - 0x10)
+#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
 /*-----------------------------------------------------------------------
  * Start addresses for the final memory configuration
  * (Set up by the startup code)
- * Please note that CFG_SDRAM_BASE _must_ start at 0
+ * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
  */
-#define CFG_SDRAM_BASE		0x40000000
-#define CFG_SDRAM_SIZE		32	/* SDRAM size in MB */
-#define CFG_SDRAM_CFG1		0x53722730
-#define CFG_SDRAM_CFG2		0x56670000
-#define CFG_SDRAM_CTRL		0xE1092000
-#define CFG_SDRAM_EMOD		0x40010000
-#define CFG_SDRAM_MODE		0x018D0000
+#define CONFIG_SYS_SDRAM_BASE		0x40000000
+#define CONFIG_SYS_SDRAM_SIZE		32	/* SDRAM size in MB */
+#define CONFIG_SYS_SDRAM_CFG1		0x53722730
+#define CONFIG_SYS_SDRAM_CFG2		0x56670000
+#define CONFIG_SYS_SDRAM_CTRL		0xE1092000
+#define CONFIG_SYS_SDRAM_EMOD		0x40010000
+#define CONFIG_SYS_SDRAM_MODE		0x018D0000
 
-#define CFG_MEMTEST_START	CFG_SDRAM_BASE + 0x400
-#define CFG_MEMTEST_END		((CFG_SDRAM_SIZE - 3) << 20)
+#define CONFIG_SYS_MEMTEST_START	CONFIG_SYS_SDRAM_BASE + 0x400
+#define CONFIG_SYS_MEMTEST_END		((CONFIG_SYS_SDRAM_SIZE - 3) << 20)
 
-#define CFG_MONITOR_BASE	(CFG_FLASH_BASE + 0x400)
-#define CFG_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor */
+#define CONFIG_SYS_MONITOR_BASE	(CONFIG_SYS_FLASH_BASE + 0x400)
+#define CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor */
 
-#define CFG_BOOTPARAMS_LEN	64*1024
-#define CFG_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc() */
+#define CONFIG_SYS_BOOTPARAMS_LEN	64*1024
+#define CONFIG_SYS_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc() */
 
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization ??
  */
-#define CFG_BOOTMAPSZ		(CFG_SDRAM_BASE + (CFG_SDRAM_SIZE << 20))
+#define CONFIG_SYS_BOOTMAPSZ		(CONFIG_SYS_SDRAM_BASE + (CONFIG_SYS_SDRAM_SIZE << 20))
 
 /*-----------------------------------------------------------------------
  * FLASH organization
  */
-#define CFG_FLASH_CFI
-#ifdef CFG_FLASH_CFI
+#define CONFIG_SYS_FLASH_CFI
+#ifdef CONFIG_SYS_FLASH_CFI
 #	define CONFIG_FLASH_CFI_DRIVER	1
-#	define CFG_FLASH_SIZE		0x800000	/* Max size that the board might have */
-#	define CFG_FLASH_CFI_WIDTH	FLASH_CFI_16BIT
-#	define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks */
-#	define CFG_MAX_FLASH_SECT	137	/* max number of sectors on one chip */
-#	define CFG_FLASH_PROTECTION	/* "Real" (hardware) sectors protection */
+#	define CONFIG_SYS_FLASH_SIZE		0x800000	/* Max size that the board might have */
+#	define CONFIG_SYS_FLASH_CFI_WIDTH	FLASH_CFI_16BIT
+#	define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks */
+#	define CONFIG_SYS_MAX_FLASH_SECT	137	/* max number of sectors on one chip */
+#	define CONFIG_SYS_FLASH_PROTECTION	/* "Real" (hardware) sectors protection */
 #endif
 
 #ifdef NANDFLASH_SIZE
-#	define CFG_MAX_NAND_DEVICE	1
-#	define CFG_NAND_BASE		CFG_CS2_BASE
-#	define CFG_NAND_SIZE		1
-#	define CFG_NAND_BASE_LIST	{ CFG_NAND_BASE }
+#	define CONFIG_SYS_MAX_NAND_DEVICE	1
+#	define CONFIG_SYS_NAND_BASE		CONFIG_SYS_CS2_BASE
+#	define CONFIG_SYS_NAND_SIZE		1
+#	define CONFIG_SYS_NAND_BASE_LIST	{ CONFIG_SYS_NAND_BASE }
 #	define NAND_MAX_CHIPS		1
 #	define NAND_ALLOW_ERASE_ALL	1
 #	define CONFIG_JFFS2_NAND	1
 #	define CONFIG_JFFS2_DEV		"nand0"
-#	define CONFIG_JFFS2_PART_SIZE	(CFG_CS2_MASK & ~1)
+#	define CONFIG_JFFS2_PART_SIZE	(CONFIG_SYS_CS2_MASK & ~1)
 #	define CONFIG_JFFS2_PART_OFFSET	0x00000000
 #endif
 
-#define CFG_FLASH_BASE		CFG_CS0_BASE
+#define CONFIG_SYS_FLASH_BASE		CONFIG_SYS_CS0_BASE
 
 /* Configuration for environment
  * Environment is embedded in u-boot in the second sector of the flash
  */
-#define CFG_ENV_OFFSET		0x4000
-#define CFG_ENV_SECT_SIZE	0x2000
-#define CFG_ENV_IS_IN_FLASH	1
-#define CFG_ENV_IS_EMBEDDED	1
+#define CONFIG_ENV_OFFSET		0x4000
+#define CONFIG_ENV_SECT_SIZE	0x2000
+#define CONFIG_ENV_IS_IN_FLASH	1
+#define CONFIG_ENV_IS_EMBEDDED	1
 
 /*-----------------------------------------------------------------------
  * Cache Configuration
  */
-#define CFG_CACHELINE_SIZE	16
+#define CONFIG_SYS_CACHELINE_SIZE	16
 
 /*-----------------------------------------------------------------------
  * Chipselect bank definitions
@@ -249,18 +249,18 @@
  * CS4 - Available
  * CS5 - Available
  */
-#define CFG_CS0_BASE		0
-#define CFG_CS0_MASK		0x007f0001
-#define CFG_CS0_CTRL		0x00001fa0
+#define CONFIG_SYS_CS0_BASE		0
+#define CONFIG_SYS_CS0_MASK		0x007f0001
+#define CONFIG_SYS_CS0_CTRL		0x00001fa0
 
-#define CFG_CS1_BASE		0x10000000
-#define CFG_CS1_MASK		0x001f0001
-#define CFG_CS1_CTRL		0x002A3780
+#define CONFIG_SYS_CS1_BASE		0x10000000
+#define CONFIG_SYS_CS1_MASK		0x001f0001
+#define CONFIG_SYS_CS1_CTRL		0x002A3780
 
 #ifdef NANDFLASH_SIZE
-#define CFG_CS2_BASE		0x20000000
-#define CFG_CS2_MASK		((NANDFLASH_SIZE << 20) | 1)
-#define CFG_CS2_CTRL		0x00001f60
+#define CONFIG_SYS_CS2_BASE		0x20000000
+#define CONFIG_SYS_CS2_MASK		((NANDFLASH_SIZE << 20) | 1)
+#define CONFIG_SYS_CS2_CTRL		0x00001f60
 #endif
 
 #endif				/* _M5329EVB_H */
diff --git a/include/configs/M5373EVB.h b/include/configs/M5373EVB.h
index 814c3a610..a1bc32a6d 100644
--- a/include/configs/M5373EVB.h
+++ b/include/configs/M5373EVB.h
@@ -38,9 +38,9 @@
 #define CONFIG_M5373		/* define processor type */
 
 #define CONFIG_MCFUART
-#define CFG_UART_PORT		(0)
+#define CONFIG_SYS_UART_PORT		(0)
 #define CONFIG_BAUDRATE		115200
-#define CFG_BAUDRATE_TABLE	{ 9600 , 19200 , 38400 , 57600, 115200 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600 , 19200 , 38400 , 57600, 115200 }
 
 #undef CONFIG_WATCHDOG
 #define CONFIG_WATCHDOG_TIMEOUT	3360	/* timeout in ms, max is 3.36 sec */
@@ -64,29 +64,29 @@
 #      define CONFIG_CMD_NAND
 #endif
 
-#define CFG_UNIFY_CACHE
+#define CONFIG_SYS_UNIFY_CACHE
 
 #define CONFIG_MCFFEC
 #ifdef CONFIG_MCFFEC
 #	define CONFIG_NET_MULTI		1
 #	define CONFIG_MII		1
 #	define CONFIG_MII_INIT		1
-#	define CFG_DISCOVER_PHY
-#	define CFG_RX_ETH_BUFFER	8
-#	define CFG_FAULT_ECHO_LINK_DOWN
+#	define CONFIG_SYS_DISCOVER_PHY
+#	define CONFIG_SYS_RX_ETH_BUFFER	8
+#	define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
 
-#	define CFG_FEC0_PINMUX		0
-#	define CFG_FEC0_MIIBASE		CFG_FEC0_IOBASE
+#	define CONFIG_SYS_FEC0_PINMUX		0
+#	define CONFIG_SYS_FEC0_MIIBASE		CONFIG_SYS_FEC0_IOBASE
 #	define MCFFEC_TOUT_LOOP		50000
-/* If CFG_DISCOVER_PHY is not defined - hardcoded */
-#	ifndef CFG_DISCOVER_PHY
+/* If CONFIG_SYS_DISCOVER_PHY is not defined - hardcoded */
+#	ifndef CONFIG_SYS_DISCOVER_PHY
 #		define FECDUPLEX	FULL
 #		define FECSPEED		_100BASET
 #	else
-#		ifndef CFG_FAULT_ECHO_LINK_DOWN
-#			define CFG_FAULT_ECHO_LINK_DOWN
+#		ifndef CONFIG_SYS_FAULT_ECHO_LINK_DOWN
+#			define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
 #		endif
-#	endif			/* CFG_DISCOVER_PHY */
+#	endif			/* CONFIG_SYS_DISCOVER_PHY */
 #endif
 
 #define CONFIG_MCFRTC
@@ -100,10 +100,10 @@
 #define CONFIG_FSL_I2C
 #define CONFIG_HARD_I2C		/* I2C with hw support */
 #undef CONFIG_SOFT_I2C		/* I2C bit-banged */
-#define CFG_I2C_SPEED		80000
-#define CFG_I2C_SLAVE		0x7F
-#define CFG_I2C_OFFSET		0x58000
-#define CFG_IMMR		CFG_MBAR
+#define CONFIG_SYS_I2C_SPEED		80000
+#define CONFIG_SYS_I2C_SLAVE		0x7F
+#define CONFIG_SYS_I2C_OFFSET		0x58000
+#define CONFIG_SYS_IMMR		CONFIG_SYS_MBAR
 
 #define CONFIG_BOOTDELAY	1	/* autoboot after 5 seconds */
 #define CONFIG_UDP_CHECKSUM
@@ -120,7 +120,7 @@
 #define CONFIG_HOSTNAME		M5373EVB
 #define CONFIG_EXTRA_ENV_SETTINGS					\
 	"netdev=eth0\0"			\
-	"loadaddr=" MK_STR(CFG_LOAD_ADDR) "\0"	\
+	"loadaddr=" MK_STR(CONFIG_SYS_LOAD_ADDR) "\0"	\
 	"u-boot=u-boot.bin\0"	\
 	"load=tftp ${loadaddr) ${u-boot}\0"	\
 	"upd=run load; run prog\0"	\
@@ -131,27 +131,27 @@
 	""
 
 #define CONFIG_PRAM		512	/* 512 KB */
-#define CFG_PROMPT		"-> "
-#define CFG_LONGHELP		/* undef to save memory */
+#define CONFIG_SYS_PROMPT		"-> "
+#define CONFIG_SYS_LONGHELP		/* undef to save memory */
 
 #ifdef CONFIG_CMD_KGDB
-#	define CFG_CBSIZE	1024	/* Console I/O Buffer Size */
+#	define CONFIG_SYS_CBSIZE	1024	/* Console I/O Buffer Size */
 #else
-#	define CFG_CBSIZE	256	/* Console I/O Buffer Size */
+#	define CONFIG_SYS_CBSIZE	256	/* Console I/O Buffer Size */
 #endif
 
-#define CFG_PBSIZE			(CFG_CBSIZE+sizeof(CFG_PROMPT)+16)	/* Print Buffer Size */
-#define CFG_MAXARGS		16	/* max number of command args */
-#define CFG_BARGSIZE		CFG_CBSIZE	/* Boot Argument Buffer Size    */
-#define CFG_LOAD_ADDR		0x40010000
+#define CONFIG_SYS_PBSIZE			(CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)	/* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS		16	/* max number of command args */
+#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size    */
+#define CONFIG_SYS_LOAD_ADDR		0x40010000
 
-#define CFG_HZ			1000
-#define CFG_CLK			80000000
-#define CFG_CPU_CLK		CFG_CLK * 3
+#define CONFIG_SYS_HZ			1000
+#define CONFIG_SYS_CLK			80000000
+#define CONFIG_SYS_CPU_CLK		CONFIG_SYS_CLK * 3
 
-#define CFG_MBAR		0xFC000000
+#define CONFIG_SYS_MBAR		0xFC000000
 
-#define CFG_LATCH_ADDR		(CFG_CS1_BASE + 0x80000)
+#define CONFIG_SYS_LATCH_ADDR		(CONFIG_SYS_CS1_BASE + 0x80000)
 
 /*
  * Low Level Configuration Settings
@@ -161,82 +161,82 @@
 /*-----------------------------------------------------------------------
  * Definitions for initial stack pointer and data area (in DPRAM)
  */
-#define CFG_INIT_RAM_ADDR	0x80000000
-#define CFG_INIT_RAM_END	0x8000	/* End of used area in internal SRAM */
-#define CFG_INIT_RAM_CTRL	0x221
-#define CFG_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
-#define CFG_GBL_DATA_OFFSET	((CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) - 0x10)
-#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_INIT_RAM_ADDR	0x80000000
+#define CONFIG_SYS_INIT_RAM_END	0x8000	/* End of used area in internal SRAM */
+#define CONFIG_SYS_INIT_RAM_CTRL	0x221
+#define CONFIG_SYS_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET	((CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) - 0x10)
+#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
 /*-----------------------------------------------------------------------
  * Start addresses for the final memory configuration
  * (Set up by the startup code)
- * Please note that CFG_SDRAM_BASE _must_ start at 0
+ * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
  */
-#define CFG_SDRAM_BASE		0x40000000
-#define CFG_SDRAM_SIZE		32	/* SDRAM size in MB */
-#define CFG_SDRAM_CFG1		0x53722730
-#define CFG_SDRAM_CFG2		0x56670000
-#define CFG_SDRAM_CTRL		0xE1092000
-#define CFG_SDRAM_EMOD		0x40010000
-#define CFG_SDRAM_MODE		0x018D0000
+#define CONFIG_SYS_SDRAM_BASE		0x40000000
+#define CONFIG_SYS_SDRAM_SIZE		32	/* SDRAM size in MB */
+#define CONFIG_SYS_SDRAM_CFG1		0x53722730
+#define CONFIG_SYS_SDRAM_CFG2		0x56670000
+#define CONFIG_SYS_SDRAM_CTRL		0xE1092000
+#define CONFIG_SYS_SDRAM_EMOD		0x40010000
+#define CONFIG_SYS_SDRAM_MODE		0x018D0000
 
-#define CFG_MEMTEST_START	CFG_SDRAM_BASE + 0x400
-#define CFG_MEMTEST_END		((CFG_SDRAM_SIZE - 3) << 20)
+#define CONFIG_SYS_MEMTEST_START	CONFIG_SYS_SDRAM_BASE + 0x400
+#define CONFIG_SYS_MEMTEST_END		((CONFIG_SYS_SDRAM_SIZE - 3) << 20)
 
-#define CFG_MONITOR_BASE	(CFG_FLASH_BASE + 0x400)
-#define CFG_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor */
+#define CONFIG_SYS_MONITOR_BASE	(CONFIG_SYS_FLASH_BASE + 0x400)
+#define CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor */
 
-#define CFG_BOOTPARAMS_LEN	64*1024
-#define CFG_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc() */
+#define CONFIG_SYS_BOOTPARAMS_LEN	64*1024
+#define CONFIG_SYS_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc() */
 
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization ??
  */
-#define CFG_BOOTMAPSZ		(CFG_SDRAM_BASE + (CFG_SDRAM_SIZE << 20))
+#define CONFIG_SYS_BOOTMAPSZ		(CONFIG_SYS_SDRAM_BASE + (CONFIG_SYS_SDRAM_SIZE << 20))
 
 /*-----------------------------------------------------------------------
  * FLASH organization
  */
-#define CFG_FLASH_CFI
-#ifdef CFG_FLASH_CFI
+#define CONFIG_SYS_FLASH_CFI
+#ifdef CONFIG_SYS_FLASH_CFI
 #	define CONFIG_FLASH_CFI_DRIVER	1
-#	define CFG_FLASH_SIZE		0x800000	/* Max size that the board might have */
-#	define CFG_FLASH_CFI_WIDTH	FLASH_CFI_16BIT
-#	define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks */
-#	define CFG_MAX_FLASH_SECT	137	/* max number of sectors on one chip */
-#	define CFG_FLASH_PROTECTION	/* "Real" (hardware) sectors protection */
+#	define CONFIG_SYS_FLASH_SIZE		0x800000	/* Max size that the board might have */
+#	define CONFIG_SYS_FLASH_CFI_WIDTH	FLASH_CFI_16BIT
+#	define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks */
+#	define CONFIG_SYS_MAX_FLASH_SECT	137	/* max number of sectors on one chip */
+#	define CONFIG_SYS_FLASH_PROTECTION	/* "Real" (hardware) sectors protection */
 #endif
 
 #ifdef NANDFLASH_SIZE
-#	define CFG_MAX_NAND_DEVICE	1
-#	define CFG_NAND_BASE		CFG_CS2_BASE
-#	define CFG_NAND_SIZE		1
-#	define CFG_NAND_BASE_LIST	{ CFG_NAND_BASE }
+#	define CONFIG_SYS_MAX_NAND_DEVICE	1
+#	define CONFIG_SYS_NAND_BASE		CONFIG_SYS_CS2_BASE
+#	define CONFIG_SYS_NAND_SIZE		1
+#	define CONFIG_SYS_NAND_BASE_LIST	{ CONFIG_SYS_NAND_BASE }
 #	define NAND_MAX_CHIPS		1
 #	define NAND_ALLOW_ERASE_ALL	1
 #	define CONFIG_JFFS2_NAND	1
 #	define CONFIG_JFFS2_DEV		"nand0"
-#	define CONFIG_JFFS2_PART_SIZE	(CFG_CS2_MASK & ~1)
+#	define CONFIG_JFFS2_PART_SIZE	(CONFIG_SYS_CS2_MASK & ~1)
 #	define CONFIG_JFFS2_PART_OFFSET	0x00000000
 #endif
 
-#define CFG_FLASH_BASE		CFG_CS0_BASE
+#define CONFIG_SYS_FLASH_BASE		CONFIG_SYS_CS0_BASE
 
 /* Configuration for environment
  * Environment is embedded in u-boot in the second sector of the flash
  */
-#define CFG_ENV_OFFSET		0x4000
-#define CFG_ENV_SECT_SIZE	0x2000
-#define CFG_ENV_IS_IN_FLASH	1
-#define CFG_ENV_IS_EMBEDDED	1
+#define CONFIG_ENV_OFFSET		0x4000
+#define CONFIG_ENV_SECT_SIZE	0x2000
+#define CONFIG_ENV_IS_IN_FLASH	1
+#define CONFIG_ENV_IS_EMBEDDED	1
 
 /*-----------------------------------------------------------------------
  * Cache Configuration
  */
-#define CFG_CACHELINE_SIZE	16
+#define CONFIG_SYS_CACHELINE_SIZE	16
 
 /*-----------------------------------------------------------------------
  * Chipselect bank definitions
@@ -249,18 +249,18 @@
  * CS4 - Available
  * CS5 - Available
  */
-#define CFG_CS0_BASE		0
-#define CFG_CS0_MASK		0x007f0001
-#define CFG_CS0_CTRL		0x00001fa0
+#define CONFIG_SYS_CS0_BASE		0
+#define CONFIG_SYS_CS0_MASK		0x007f0001
+#define CONFIG_SYS_CS0_CTRL		0x00001fa0
 
-#define CFG_CS1_BASE		0x10000000
-#define CFG_CS1_MASK		0x001f0001
-#define CFG_CS1_CTRL		0x002A3780
+#define CONFIG_SYS_CS1_BASE		0x10000000
+#define CONFIG_SYS_CS1_MASK		0x001f0001
+#define CONFIG_SYS_CS1_CTRL		0x002A3780
 
 #ifdef NANDFLASH_SIZE
-#define CFG_CS2_BASE		0x20000000
-#define CFG_CS2_MASK		((NANDFLASH_SIZE << 20) | 1)
-#define CFG_CS2_CTRL		0x00001f60
+#define CONFIG_SYS_CS2_BASE		0x20000000
+#define CONFIG_SYS_CS2_MASK		((NANDFLASH_SIZE << 20) | 1)
+#define CONFIG_SYS_CS2_CTRL		0x00001f60
 #endif
 
 #endif				/* _M5373EVB_H */
diff --git a/include/configs/M54451EVB.h b/include/configs/M54451EVB.h
index cf58239df..45f701652 100644
--- a/include/configs/M54451EVB.h
+++ b/include/configs/M54451EVB.h
@@ -39,9 +39,9 @@
 #define CONFIG_M54451EVB	/* M54451EVB board */
 
 #define CONFIG_MCFUART
-#define CFG_UART_PORT		(0)
+#define CONFIG_SYS_UART_PORT		(0)
 #define CONFIG_BAUDRATE		115200
-#define CFG_BAUDRATE_TABLE	{ 9600 , 19200 , 38400 , 57600, 115200 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600 , 19200 , 38400 , 57600, 115200 }
 
 #undef CONFIG_WATCHDOG
 
@@ -84,12 +84,12 @@
 #	define CONFIG_NET_MULTI		1
 #	define CONFIG_MII		1
 #	define CONFIG_MII_INIT		1
-#	define CFG_DISCOVER_PHY
-#	define CFG_RX_ETH_BUFFER	8
-#	define CFG_FAULT_ECHO_LINK_DOWN
+#	define CONFIG_SYS_DISCOVER_PHY
+#	define CONFIG_SYS_RX_ETH_BUFFER	8
+#	define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
 
-#	define CFG_FEC0_PINMUX	0
-#	define CFG_FEC0_MIIBASE	CFG_FEC0_IOBASE
+#	define CONFIG_SYS_FEC0_PINMUX	0
+#	define CONFIG_SYS_FEC0_MIIBASE	CONFIG_SYS_FEC0_IOBASE
 #	define MCFFEC_TOUT_LOOP 50000
 
 #	define CONFIG_BOOTDELAY	1	/* autoboot after 5 seconds */
@@ -102,29 +102,29 @@
 #	define CONFIG_GATEWAYIP		192.162.1.1
 #	define CONFIG_OVERWRITE_ETHADDR_ONCE
 
-/* If CFG_DISCOVER_PHY is not defined - hardcoded */
-#	ifndef CFG_DISCOVER_PHY
+/* If CONFIG_SYS_DISCOVER_PHY is not defined - hardcoded */
+#	ifndef CONFIG_SYS_DISCOVER_PHY
 #		define FECDUPLEX	FULL
 #		define FECSPEED		_100BASET
 #	else
-#		ifndef CFG_FAULT_ECHO_LINK_DOWN
-#			define CFG_FAULT_ECHO_LINK_DOWN
+#		ifndef CONFIG_SYS_FAULT_ECHO_LINK_DOWN
+#			define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
 #		endif
-#	endif			/* CFG_DISCOVER_PHY */
+#	endif			/* CONFIG_SYS_DISCOVER_PHY */
 #endif
 
 #define CONFIG_HOSTNAME		M54451EVB
-#ifdef CFG_STMICRO_BOOT
+#ifdef CONFIG_SYS_STMICRO_BOOT
 /* ST Micro serial flash */
-#define	CFG_LOAD_ADDR2		0x40010007
+#define	CONFIG_SYS_LOAD_ADDR2		0x40010007
 #define CONFIG_EXTRA_ENV_SETTINGS		\
 	"netdev=eth0\0"				\
-	"inpclk=" MK_STR(CFG_INPUT_CLKSRC) "\0"	\
+	"inpclk=" MK_STR(CONFIG_SYS_INPUT_CLKSRC) "\0"	\
 	"loadaddr=0x40010000\0"			\
 	"sbfhdr=sbfhdr.bin\0"			\
 	"uboot=u-boot.bin\0"			\
 	"load=tftp ${loadaddr} ${sbfhdr};"	\
-	"tftp " MK_STR(CFG_LOAD_ADDR2) " ${uboot} \0"	\
+	"tftp " MK_STR(CONFIG_SYS_LOAD_ADDR2) " ${uboot} \0"	\
 	"upd=run load; run prog\0"		\
 	"prog=sf probe 0:1 10000 1;"		\
 	"sf erase 0 30000;"			\
@@ -132,16 +132,16 @@
 	"save\0"				\
 	""
 #else
-#define CFG_UBOOT_END	0x3FFFF
+#define CONFIG_SYS_UBOOT_END	0x3FFFF
 #define CONFIG_EXTRA_ENV_SETTINGS		\
 	"netdev=eth0\0"				\
-	"inpclk=" MK_STR(CFG_INPUT_CLKSRC) "\0"	\
+	"inpclk=" MK_STR(CONFIG_SYS_INPUT_CLKSRC) "\0"	\
 	"loadaddr=40010000\0"			\
 	"u-boot=u-boot.bin\0"			\
 	"load=tftp ${loadaddr) ${u-boot}\0"	\
 	"upd=run load; run prog\0"		\
-	"prog=prot off 0 " MK_STR(CFG_UBOOT_END)	\
-	"; era 0 " MK_STR(CFG_UBOOT_END) " ;"	\
+	"prog=prot off 0 " MK_STR(CONFIG_SYS_UBOOT_END)	\
+	"; era 0 " MK_STR(CONFIG_SYS_UBOOT_END) " ;"	\
 	"cp.b ${loadaddr} 0 ${filesize};"	\
 	"save\0"				\
 	""
@@ -150,7 +150,7 @@
 /* Realtime clock */
 #define CONFIG_MCFRTC
 #undef RTC_DEBUG
-#define CFG_RTC_OSCILLATOR	(32 * CFG_HZ)
+#define CONFIG_SYS_RTC_OSCILLATOR	(32 * CONFIG_SYS_HZ)
 
 /* Timer */
 #define CONFIG_MCFTMR
@@ -160,22 +160,22 @@
 #define CONFIG_FSL_I2C
 #define CONFIG_HARD_I2C		/* I2C with hardware support */
 #undef	CONFIG_SOFT_I2C		/* I2C bit-banged               */
-#define CFG_I2C_SPEED		80000	/* I2C speed and slave address  */
-#define CFG_I2C_SLAVE		0x7F
-#define CFG_I2C_OFFSET		0x58000
-#define CFG_IMMR		CFG_MBAR
+#define CONFIG_SYS_I2C_SPEED		80000	/* I2C speed and slave address  */
+#define CONFIG_SYS_I2C_SLAVE		0x7F
+#define CONFIG_SYS_I2C_OFFSET		0x58000
+#define CONFIG_SYS_IMMR		CONFIG_SYS_MBAR
 
 /* DSPI and Serial Flash */
 #define CONFIG_CF_DSPI
 #define CONFIG_SERIAL_FLASH
 #define CONFIG_HARD_SPI
-#define CFG_SER_FLASH_BASE	0x01000000
-#define CFG_SBFHDR_SIZE		0x7
+#define CONFIG_SYS_SER_FLASH_BASE	0x01000000
+#define CONFIG_SYS_SBFHDR_SIZE		0x7
 #ifdef CONFIG_CMD_SPI
 #	define CONFIG_SPI_FLASH
 #	define CONFIG_SPI_FLASH_STMICRO
 
-#	define CFG_DSPI_DCTAR0		(DSPI_DCTAR_TRSZ(7) | \
+#	define CONFIG_SYS_DSPI_DCTAR0		(DSPI_DCTAR_TRSZ(7) | \
 					 DSPI_DCTAR_CPOL | \
 					 DSPI_DCTAR_CPHA | \
 					 DSPI_DCTAR_PCSSCK_1CLK | \
@@ -193,23 +193,23 @@
 
 #define CONFIG_PRAM		2048	/* 2048 KB */
 
-#define CFG_PROMPT		"-> "
-#define CFG_LONGHELP		/* undef to save memory */
+#define CONFIG_SYS_PROMPT		"-> "
+#define CONFIG_SYS_LONGHELP		/* undef to save memory */
 
 #if defined(CONFIG_CMD_KGDB)
-#define CFG_CBSIZE			1024	/* Console I/O Buffer Size */
+#define CONFIG_SYS_CBSIZE			1024	/* Console I/O Buffer Size */
 #else
-#define CFG_CBSIZE			256	/* Console I/O Buffer Size */
+#define CONFIG_SYS_CBSIZE			256	/* Console I/O Buffer Size */
 #endif
-#define CFG_PBSIZE		(CFG_CBSIZE+sizeof(CFG_PROMPT)+16)	/* Print Buffer Size */
-#define CFG_MAXARGS		16	/* max number of command args */
-#define CFG_BARGSIZE		CFG_CBSIZE	/* Boot Argument Buffer Size    */
+#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)	/* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS		16	/* max number of command args */
+#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size    */
 
-#define CFG_LOAD_ADDR		(CFG_SDRAM_BASE + 0x10000)
+#define CONFIG_SYS_LOAD_ADDR		(CONFIG_SYS_SDRAM_BASE + 0x10000)
 
-#define CFG_HZ			1000
+#define CONFIG_SYS_HZ			1000
 
-#define CFG_MBAR		0xFC000000
+#define CONFIG_SYS_MBAR		0xFC000000
 
 /*
  * Low Level Configuration Settings
@@ -220,39 +220,39 @@
 /*-----------------------------------------------------------------------
  * Definitions for initial stack pointer and data area (in DPRAM)
  */
-#define CFG_INIT_RAM_ADDR	0x80000000
-#define CFG_INIT_RAM_END	0x8000	/* End of used area in internal SRAM */
-#define CFG_INIT_RAM_CTRL	0x221
-#define CFG_GBL_DATA_SIZE	256	/* size in bytes reserved for initial data */
-#define CFG_GBL_DATA_OFFSET	((CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) - 32)
-#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
-#define CFG_SBFHDR_DATA_OFFSET	(CFG_INIT_RAM_END - 32)
+#define CONFIG_SYS_INIT_RAM_ADDR	0x80000000
+#define CONFIG_SYS_INIT_RAM_END	0x8000	/* End of used area in internal SRAM */
+#define CONFIG_SYS_INIT_RAM_CTRL	0x221
+#define CONFIG_SYS_GBL_DATA_SIZE	256	/* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET	((CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) - 32)
+#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
+#define CONFIG_SYS_SBFHDR_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - 32)
 
 /*-----------------------------------------------------------------------
  * Start addresses for the final memory configuration
  * (Set up by the startup code)
- * Please note that CFG_SDRAM_BASE _must_ start at 0
+ * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
  */
-#define CFG_SDRAM_BASE		0x40000000
-#define CFG_SDRAM_SIZE		128	/* SDRAM size in MB */
-#define CFG_SDRAM_CFG1		0x33633F30
-#define CFG_SDRAM_CFG2		0x57670000
-#define CFG_SDRAM_CTRL		0xE20D2C00
-#define CFG_SDRAM_EMOD		0x80810000
-#define CFG_SDRAM_MODE		0x008D0000
-#define CFG_SDRAM_DRV_STRENGTH	0x44
-
-#define CFG_MEMTEST_START	CFG_SDRAM_BASE + 0x400
-#define CFG_MEMTEST_END		((CFG_SDRAM_SIZE - 3) << 20)
+#define CONFIG_SYS_SDRAM_BASE		0x40000000
+#define CONFIG_SYS_SDRAM_SIZE		128	/* SDRAM size in MB */
+#define CONFIG_SYS_SDRAM_CFG1		0x33633F30
+#define CONFIG_SYS_SDRAM_CFG2		0x57670000
+#define CONFIG_SYS_SDRAM_CTRL		0xE20D2C00
+#define CONFIG_SYS_SDRAM_EMOD		0x80810000
+#define CONFIG_SYS_SDRAM_MODE		0x008D0000
+#define CONFIG_SYS_SDRAM_DRV_STRENGTH	0x44
+
+#define CONFIG_SYS_MEMTEST_START	CONFIG_SYS_SDRAM_BASE + 0x400
+#define CONFIG_SYS_MEMTEST_END		((CONFIG_SYS_SDRAM_SIZE - 3) << 20)
 
 #ifdef CONFIG_CF_SBF
-#	define CFG_MONITOR_BASE	(TEXT_BASE + 0x400)
+#	define CONFIG_SYS_MONITOR_BASE	(TEXT_BASE + 0x400)
 #else
-#	define CFG_MONITOR_BASE	(CFG_FLASH_BASE + 0x400)
+#	define CONFIG_SYS_MONITOR_BASE	(CONFIG_SYS_FLASH_BASE + 0x400)
 #endif
-#define CFG_BOOTPARAMS_LEN	64*1024
-#define CFG_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor */
-#define CFG_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc() */
+#define CONFIG_SYS_BOOTPARAMS_LEN	64*1024
+#define CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor */
+#define CONFIG_SYS_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc() */
 
 /*
  * For booting Linux, the board info and command line data
@@ -260,50 +260,50 @@
  * the maximum mapped by the Linux kernel during initialization ??
  */
 /* Initial Memory map for Linux */
-#define CFG_BOOTMAPSZ		(CFG_SDRAM_BASE + (CFG_SDRAM_SIZE << 20))
+#define CONFIG_SYS_BOOTMAPSZ		(CONFIG_SYS_SDRAM_BASE + (CONFIG_SYS_SDRAM_SIZE << 20))
 
 /* Configuration for environment
  * Environment is embedded in u-boot in the second sector of the flash
  */
 #if defined(CONFIG_CF_SBF)
-#	define CFG_ENV_IS_IN_SPI_FLASH	1
-#	define CFG_ENV_SPI_CS		1
-#	define CFG_ENV_OFFSET		0x20000
-#	define CFG_ENV_SIZE		0x2000
-#	define CFG_ENV_SECT_SIZE	0x10000
+#	define CONFIG_ENV_IS_IN_SPI_FLASH	1
+#	define CONFIG_ENV_SPI_CS		1
+#	define CONFIG_ENV_OFFSET		0x20000
+#	define CONFIG_ENV_SIZE		0x2000
+#	define CONFIG_ENV_SECT_SIZE	0x10000
 #else
-#	define CFG_ENV_IS_IN_FLASH	1
-#	define CFG_ENV_ADDR		(CFG_FLASH_BASE + 0x4000)
-#	define CFG_ENV_SECT_SIZE	0x2000
+#	define CONFIG_ENV_IS_IN_FLASH	1
+#	define CONFIG_ENV_ADDR		(CONFIG_SYS_FLASH_BASE + 0x4000)
+#	define CONFIG_ENV_SECT_SIZE	0x2000
 #endif
 #undef CONFIG_ENV_OVERWRITE
-#undef CFG_ENV_IS_EMBEDDED
+#undef CONFIG_ENV_IS_EMBEDDED
 
 /*-----------------------------------------------------------------------
  * FLASH organization
  */
-#ifdef CFG_STMICRO_BOOT
-#	define CFG_FLASH_BASE		CFG_SER_FLASH_BASE
-#	define CFG_FLASH0_BASE		CFG_SER_FLASH_BASE
-#	define CFG_FLASH1_BASE		CFG_CS0_BASE
+#ifdef CONFIG_SYS_STMICRO_BOOT
+#	define CONFIG_SYS_FLASH_BASE		CONFIG_SYS_SER_FLASH_BASE
+#	define CONFIG_SYS_FLASH0_BASE		CONFIG_SYS_SER_FLASH_BASE
+#	define CONFIG_SYS_FLASH1_BASE		CONFIG_SYS_CS0_BASE
 #endif
-#ifdef CFG_SPANSION_BOOT
-#	define CFG_FLASH_BASE		CFG_CS0_BASE
-#	define CFG_FLASH0_BASE		CFG_CS0_BASE
-#	define CFG_FLASH1_BASE		CFG_SER_FLASH_BASE
+#ifdef CONFIG_SYS_SPANSION_BOOT
+#	define CONFIG_SYS_FLASH_BASE		CONFIG_SYS_CS0_BASE
+#	define CONFIG_SYS_FLASH0_BASE		CONFIG_SYS_CS0_BASE
+#	define CONFIG_SYS_FLASH1_BASE		CONFIG_SYS_SER_FLASH_BASE
 #endif
 
-#define CFG_FLASH_CFI
-#ifdef CFG_FLASH_CFI
+#define CONFIG_SYS_FLASH_CFI
+#ifdef CONFIG_SYS_FLASH_CFI
 
 #	define CONFIG_FLASH_CFI_DRIVER	1
-#	define CFG_FLASH_SIZE		0x1000000	/* Max size that the board might have */
-#	define CFG_FLASH_CFI_WIDTH	FLASH_CFI_16BIT
-#	define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks */
-#	define CFG_MAX_FLASH_SECT	137	/* max number of sectors on one chip */
-#	define CFG_FLASH_PROTECTION	/* "Real" (hardware) sectors protection */
-#	define CFG_FLASH_CHECKSUM
-#	define CFG_FLASH_BANKS_LIST	{ CFG_CS0_BASE }
+#	define CONFIG_SYS_FLASH_SIZE		0x1000000	/* Max size that the board might have */
+#	define CONFIG_SYS_FLASH_CFI_WIDTH	FLASH_CFI_16BIT
+#	define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks */
+#	define CONFIG_SYS_MAX_FLASH_SECT	137	/* max number of sectors on one chip */
+#	define CONFIG_SYS_FLASH_PROTECTION	/* "Real" (hardware) sectors protection */
+#	define CONFIG_SYS_FLASH_CHECKSUM
+#	define CONFIG_SYS_FLASH_BANKS_LIST	{ CONFIG_SYS_CS0_BASE }
 
 #endif
 
@@ -311,21 +311,21 @@
  * This is setting for JFFS2 support in u-boot.
  * NOTE: Enable CONFIG_CMD_JFFS2 for JFFS2 support.
  */
-#ifdef CFG_SPANSION_BOOT
+#ifdef CONFIG_SYS_SPANSION_BOOT
 #	define CONFIG_JFFS2_DEV		"nor0"
 #	define CONFIG_JFFS2_PART_SIZE	0x01000000
-#	define CONFIG_JFFS2_PART_OFFSET	(CFG_FLASH0_BASE + 0x500000)
+#	define CONFIG_JFFS2_PART_OFFSET	(CONFIG_SYS_FLASH0_BASE + 0x500000)
 #endif
-#ifdef CFG_STMICRO_BOOT
+#ifdef CONFIG_SYS_STMICRO_BOOT
 #	define CONFIG_JFFS2_DEV		"nor0"
 #	define CONFIG_JFFS2_PART_SIZE	0x01000000
-#	define CONFIG_JFFS2_PART_OFFSET	(CFG_FLASH0_BASE + 0x500000)
+#	define CONFIG_JFFS2_PART_OFFSET	(CONFIG_SYS_FLASH0_BASE + 0x500000)
 #endif
 
 /*-----------------------------------------------------------------------
  * Cache Configuration
  */
-#define CFG_CACHELINE_SIZE		16
+#define CONFIG_SYS_CACHELINE_SIZE		16
 
 /*-----------------------------------------------------------------------
  * Memory bank definitions
@@ -340,10 +340,10 @@
  */
 
  /* SPANSION Flash */
-#define CFG_CS0_BASE		0x00000000
-#define CFG_CS0_MASK		0x007F0001
-#define CFG_CS0_CTRL		0x00001180
+#define CONFIG_SYS_CS0_BASE		0x00000000
+#define CONFIG_SYS_CS0_MASK		0x007F0001
+#define CONFIG_SYS_CS0_CTRL		0x00001180
 
-#define CFG_SPANSION_BASE	CFG_CS0_BASE
+#define CONFIG_SYS_SPANSION_BASE	CONFIG_SYS_CS0_BASE
 
 #endif				/* _M54451EVB_H */
diff --git a/include/configs/M54455EVB.h b/include/configs/M54455EVB.h
index ad9c15eb9..101dcedee 100644
--- a/include/configs/M54455EVB.h
+++ b/include/configs/M54455EVB.h
@@ -39,9 +39,9 @@
 #define CONFIG_M54455EVB	/* M54455EVB board */
 
 #define CONFIG_MCFUART
-#define CFG_UART_PORT		(0)
+#define CONFIG_SYS_UART_PORT		(0)
 #define CONFIG_BAUDRATE		115200
-#define CFG_BAUDRATE_TABLE	{ 9600 , 19200 , 38400 , 57600, 115200 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600 , 19200 , 38400 , 57600, 115200 }
 
 #undef CONFIG_WATCHDOG
 
@@ -88,14 +88,14 @@
 #	define CONFIG_NET_MULTI		1
 #	define CONFIG_MII		1
 #	define CONFIG_MII_INIT		1
-#	define CFG_DISCOVER_PHY
-#	define CFG_RX_ETH_BUFFER	8
-#	define CFG_FAULT_ECHO_LINK_DOWN
-
-#	define CFG_FEC0_PINMUX	0
-#	define CFG_FEC1_PINMUX	0
-#	define CFG_FEC0_MIIBASE	CFG_FEC0_IOBASE
-#	define CFG_FEC1_MIIBASE	CFG_FEC0_IOBASE
+#	define CONFIG_SYS_DISCOVER_PHY
+#	define CONFIG_SYS_RX_ETH_BUFFER	8
+#	define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
+
+#	define CONFIG_SYS_FEC0_PINMUX	0
+#	define CONFIG_SYS_FEC1_PINMUX	0
+#	define CONFIG_SYS_FEC0_MIIBASE	CONFIG_SYS_FEC0_IOBASE
+#	define CONFIG_SYS_FEC1_MIIBASE	CONFIG_SYS_FEC0_IOBASE
 #	define MCFFEC_TOUT_LOOP 50000
 #	define CONFIG_HAS_ETH1
 
@@ -110,29 +110,29 @@
 #	define CONFIG_GATEWAYIP		192.162.1.1
 #	define CONFIG_OVERWRITE_ETHADDR_ONCE
 
-/* If CFG_DISCOVER_PHY is not defined - hardcoded */
-#	ifndef CFG_DISCOVER_PHY
+/* If CONFIG_SYS_DISCOVER_PHY is not defined - hardcoded */
+#	ifndef CONFIG_SYS_DISCOVER_PHY
 #		define FECDUPLEX	FULL
 #		define FECSPEED		_100BASET
 #	else
-#		ifndef CFG_FAULT_ECHO_LINK_DOWN
-#			define CFG_FAULT_ECHO_LINK_DOWN
+#		ifndef CONFIG_SYS_FAULT_ECHO_LINK_DOWN
+#			define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
 #		endif
-#	endif			/* CFG_DISCOVER_PHY */
+#	endif			/* CONFIG_SYS_DISCOVER_PHY */
 #endif
 
 #define CONFIG_HOSTNAME		M54455EVB
-#ifdef CFG_STMICRO_BOOT
+#ifdef CONFIG_SYS_STMICRO_BOOT
 /* ST Micro serial flash */
-#define	CFG_LOAD_ADDR2		0x40010013
+#define	CONFIG_SYS_LOAD_ADDR2		0x40010013
 #define CONFIG_EXTRA_ENV_SETTINGS		\
 	"netdev=eth0\0"				\
-	"inpclk=" MK_STR(CFG_INPUT_CLKSRC) "\0"	\
+	"inpclk=" MK_STR(CONFIG_SYS_INPUT_CLKSRC) "\0"	\
 	"loadaddr=0x40010000\0"			\
 	"sbfhdr=sbfhdr.bin\0"			\
 	"uboot=u-boot.bin\0"			\
 	"load=tftp ${loadaddr} ${sbfhdr};"	\
-	"tftp " MK_STR(CFG_LOAD_ADDR2) " ${uboot} \0"	\
+	"tftp " MK_STR(CONFIG_SYS_LOAD_ADDR2) " ${uboot} \0"	\
 	"upd=run load; run prog\0"		\
 	"prog=sf probe 0:1 10000 1;"		\
 	"sf erase 0 30000;"			\
@@ -141,23 +141,23 @@
 	""
 #else
 /* Atmel and Intel */
-#ifdef CFG_ATMEL_BOOT
-#	define CFG_UBOOT_END	0x0403FFFF
-#elif defined(CFG_INTEL_BOOT)
-#	define CFG_UBOOT_END	0x3FFFF
+#ifdef CONFIG_SYS_ATMEL_BOOT
+#	define CONFIG_SYS_UBOOT_END	0x0403FFFF
+#elif defined(CONFIG_SYS_INTEL_BOOT)
+#	define CONFIG_SYS_UBOOT_END	0x3FFFF
 #endif
 #define CONFIG_EXTRA_ENV_SETTINGS		\
 	"netdev=eth0\0"				\
-	"inpclk=" MK_STR(CFG_INPUT_CLKSRC) "\0"	\
+	"inpclk=" MK_STR(CONFIG_SYS_INPUT_CLKSRC) "\0"	\
 	"loadaddr=0x40010000\0"			\
 	"uboot=u-boot.bin\0"			\
 	"load=tftp ${loadaddr} ${uboot}\0"	\
 	"upd=run load; run prog\0"		\
-	"prog=prot off " MK_STR(CFG_FLASH_BASE)	\
-	" " MK_STR(CFG_UBOOT_END) ";"		\
-	"era " MK_STR(CFG_FLASH_BASE) " "	\
-	MK_STR(CFG_UBOOT_END) ";"		\
-	"cp.b ${loadaddr} " MK_STR(CFG_FLASH_BASE)	\
+	"prog=prot off " MK_STR(CONFIG_SYS_FLASH_BASE)	\
+	" " MK_STR(CONFIG_SYS_UBOOT_END) ";"		\
+	"era " MK_STR(CONFIG_SYS_FLASH_BASE) " "	\
+	MK_STR(CONFIG_SYS_UBOOT_END) ";"		\
+	"cp.b ${loadaddr} " MK_STR(CONFIG_SYS_FLASH_BASE)	\
 	" ${filesize}; save\0"			\
 	""
 #endif
@@ -170,22 +170,22 @@
 #define CONFIG_ATAPI
 #undef CONFIG_LBA48
 
-#define CFG_IDE_MAXBUS		1
-#define CFG_IDE_MAXDEVICE	2
+#define CONFIG_SYS_IDE_MAXBUS		1
+#define CONFIG_SYS_IDE_MAXDEVICE	2
 
-#define CFG_ATA_BASE_ADDR	0x90000000
-#define CFG_ATA_IDE0_OFFSET	0
+#define CONFIG_SYS_ATA_BASE_ADDR	0x90000000
+#define CONFIG_SYS_ATA_IDE0_OFFSET	0
 
-#define CFG_ATA_DATA_OFFSET	0xA0	/* Offset for data I/O                            */
-#define CFG_ATA_REG_OFFSET	0xA0	/* Offset for normal register accesses */
-#define CFG_ATA_ALT_OFFSET	0xC0	/* Offset for alternate registers           */
-#define CFG_ATA_STRIDE		4	/* Interval between registers                 */
+#define CONFIG_SYS_ATA_DATA_OFFSET	0xA0	/* Offset for data I/O                            */
+#define CONFIG_SYS_ATA_REG_OFFSET	0xA0	/* Offset for normal register accesses */
+#define CONFIG_SYS_ATA_ALT_OFFSET	0xC0	/* Offset for alternate registers           */
+#define CONFIG_SYS_ATA_STRIDE		4	/* Interval between registers                 */
 #define _IO_BASE		0
 
 /* Realtime clock */
 #define CONFIG_MCFRTC
 #undef RTC_DEBUG
-#define CFG_RTC_OSCILLATOR	(32 * CFG_HZ)
+#define CONFIG_SYS_RTC_OSCILLATOR	(32 * CONFIG_SYS_HZ)
 
 /* Timer */
 #define CONFIG_MCFTMR
@@ -195,21 +195,21 @@
 #define CONFIG_FSL_I2C
 #define CONFIG_HARD_I2C		/* I2C with hardware support */
 #undef	CONFIG_SOFT_I2C		/* I2C bit-banged               */
-#define CFG_I2C_SPEED		80000	/* I2C speed and slave address  */
-#define CFG_I2C_SLAVE		0x7F
-#define CFG_I2C_OFFSET		0x58000
-#define CFG_IMMR		CFG_MBAR
+#define CONFIG_SYS_I2C_SPEED		80000	/* I2C speed and slave address  */
+#define CONFIG_SYS_I2C_SLAVE		0x7F
+#define CONFIG_SYS_I2C_OFFSET		0x58000
+#define CONFIG_SYS_IMMR		CONFIG_SYS_MBAR
 
 /* DSPI and Serial Flash */
 #define CONFIG_CF_DSPI
 #define CONFIG_HARD_SPI
-#define CFG_SER_FLASH_BASE	0x01000000
-#define CFG_SBFHDR_SIZE		0x13
+#define CONFIG_SYS_SER_FLASH_BASE	0x01000000
+#define CONFIG_SYS_SBFHDR_SIZE		0x13
 #ifdef CONFIG_CMD_SPI
 #	define CONFIG_SPI_FLASH
 #	define CONFIG_SPI_FLASH_STMICRO
 
-#	define CFG_DSPI_DCTAR0		(DSPI_DCTAR_TRSZ(7) | \
+#	define CONFIG_SYS_DSPI_DCTAR0		(DSPI_DCTAR_TRSZ(7) | \
 					 DSPI_DCTAR_CPOL | \
 					 DSPI_DCTAR_CPHA | \
 					 DSPI_DCTAR_PCSSCK_1CLK | \
@@ -228,27 +228,27 @@
 #define CONFIG_PCI_PNP		1
 #define CONFIG_PCIAUTO_SKIP_HOST_BRIDGE	1
 
-#define CFG_PCI_CACHE_LINE_SIZE	4
+#define CONFIG_SYS_PCI_CACHE_LINE_SIZE	4
 
-#define CFG_PCI_MEM_BUS		0xA0000000
-#define CFG_PCI_MEM_PHYS	CFG_PCI_MEM_BUS
-#define CFG_PCI_MEM_SIZE	0x10000000
+#define CONFIG_SYS_PCI_MEM_BUS		0xA0000000
+#define CONFIG_SYS_PCI_MEM_PHYS	CONFIG_SYS_PCI_MEM_BUS
+#define CONFIG_SYS_PCI_MEM_SIZE	0x10000000
 
-#define CFG_PCI_IO_BUS		0xB1000000
-#define CFG_PCI_IO_PHYS		CFG_PCI_IO_BUS
-#define CFG_PCI_IO_SIZE		0x01000000
+#define CONFIG_SYS_PCI_IO_BUS		0xB1000000
+#define CONFIG_SYS_PCI_IO_PHYS		CONFIG_SYS_PCI_IO_BUS
+#define CONFIG_SYS_PCI_IO_SIZE		0x01000000
 
-#define CFG_PCI_CFG_BUS		0xB0000000
-#define CFG_PCI_CFG_PHYS	CFG_PCI_CFG_BUS
-#define CFG_PCI_CFG_SIZE	0x01000000
+#define CONFIG_SYS_PCI_CFG_BUS		0xB0000000
+#define CONFIG_SYS_PCI_CFG_PHYS	CONFIG_SYS_PCI_CFG_BUS
+#define CONFIG_SYS_PCI_CFG_SIZE	0x01000000
 #endif
 
 /* FPGA - Spartan 2 */
 /* experiment
-#define CONFIG_FPGA		CFG_SPARTAN3
+#define CONFIG_FPGA		CONFIG_SYS_SPARTAN3
 #define CONFIG_FPGA_COUNT	1
-#define CFG_FPGA_PROG_FEEDBACK
-#define CFG_FPGA_CHECK_CTRLC
+#define CONFIG_SYS_FPGA_PROG_FEEDBACK
+#define CONFIG_SYS_FPGA_CHECK_CTRLC
 */
 
 /* Input, PCI, Flexbus, and VCO */
@@ -256,23 +256,23 @@
 
 #define CONFIG_PRAM		2048	/* 2048 KB */
 
-#define CFG_PROMPT		"-> "
-#define CFG_LONGHELP		/* undef to save memory */
+#define CONFIG_SYS_PROMPT		"-> "
+#define CONFIG_SYS_LONGHELP		/* undef to save memory */
 
 #if defined(CONFIG_CMD_KGDB)
-#define CFG_CBSIZE			1024	/* Console I/O Buffer Size */
+#define CONFIG_SYS_CBSIZE			1024	/* Console I/O Buffer Size */
 #else
-#define CFG_CBSIZE			256	/* Console I/O Buffer Size */
+#define CONFIG_SYS_CBSIZE			256	/* Console I/O Buffer Size */
 #endif
-#define CFG_PBSIZE		(CFG_CBSIZE+sizeof(CFG_PROMPT)+16)	/* Print Buffer Size */
-#define CFG_MAXARGS		16	/* max number of command args */
-#define CFG_BARGSIZE		CFG_CBSIZE	/* Boot Argument Buffer Size    */
+#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)	/* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS		16	/* max number of command args */
+#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size    */
 
-#define CFG_LOAD_ADDR		(CFG_SDRAM_BASE + 0x10000)
+#define CONFIG_SYS_LOAD_ADDR		(CONFIG_SYS_SDRAM_BASE + 0x10000)
 
-#define CFG_HZ			1000
+#define CONFIG_SYS_HZ			1000
 
-#define CFG_MBAR		0xFC000000
+#define CONFIG_SYS_MBAR		0xFC000000
 
 /*
  * Low Level Configuration Settings
@@ -283,40 +283,40 @@
 /*-----------------------------------------------------------------------
  * Definitions for initial stack pointer and data area (in DPRAM)
  */
-#define CFG_INIT_RAM_ADDR	0x80000000
-#define CFG_INIT_RAM_END	0x8000	/* End of used area in internal SRAM */
-#define CFG_INIT_RAM_CTRL	0x221
-#define CFG_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
-#define CFG_GBL_DATA_OFFSET	((CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) - 32)
-#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
-#define CFG_SBFHDR_DATA_OFFSET	(CFG_INIT_RAM_END - 32)
+#define CONFIG_SYS_INIT_RAM_ADDR	0x80000000
+#define CONFIG_SYS_INIT_RAM_END	0x8000	/* End of used area in internal SRAM */
+#define CONFIG_SYS_INIT_RAM_CTRL	0x221
+#define CONFIG_SYS_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET	((CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) - 32)
+#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
+#define CONFIG_SYS_SBFHDR_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - 32)
 
 /*-----------------------------------------------------------------------
  * Start addresses for the final memory configuration
  * (Set up by the startup code)
- * Please note that CFG_SDRAM_BASE _must_ start at 0
+ * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
  */
-#define CFG_SDRAM_BASE		0x40000000
-#define CFG_SDRAM_BASE1		0x48000000
-#define CFG_SDRAM_SIZE		256	/* SDRAM size in MB */
-#define CFG_SDRAM_CFG1		0x65311610
-#define CFG_SDRAM_CFG2		0x59670000
-#define CFG_SDRAM_CTRL		0xEA0B2000
-#define CFG_SDRAM_EMOD		0x40010000
-#define CFG_SDRAM_MODE		0x00010033
-#define CFG_SDRAM_DRV_STRENGTH	0xAA
-
-#define CFG_MEMTEST_START	CFG_SDRAM_BASE + 0x400
-#define CFG_MEMTEST_END		((CFG_SDRAM_SIZE - 3) << 20)
+#define CONFIG_SYS_SDRAM_BASE		0x40000000
+#define CONFIG_SYS_SDRAM_BASE1		0x48000000
+#define CONFIG_SYS_SDRAM_SIZE		256	/* SDRAM size in MB */
+#define CONFIG_SYS_SDRAM_CFG1		0x65311610
+#define CONFIG_SYS_SDRAM_CFG2		0x59670000
+#define CONFIG_SYS_SDRAM_CTRL		0xEA0B2000
+#define CONFIG_SYS_SDRAM_EMOD		0x40010000
+#define CONFIG_SYS_SDRAM_MODE		0x00010033
+#define CONFIG_SYS_SDRAM_DRV_STRENGTH	0xAA
+
+#define CONFIG_SYS_MEMTEST_START	CONFIG_SYS_SDRAM_BASE + 0x400
+#define CONFIG_SYS_MEMTEST_END		((CONFIG_SYS_SDRAM_SIZE - 3) << 20)
 
 #ifdef CONFIG_CF_SBF
-#	define CFG_MONITOR_BASE	(TEXT_BASE + 0x400)
+#	define CONFIG_SYS_MONITOR_BASE	(TEXT_BASE + 0x400)
 #else
-#	define CFG_MONITOR_BASE	(CFG_FLASH_BASE + 0x400)
+#	define CONFIG_SYS_MONITOR_BASE	(CONFIG_SYS_FLASH_BASE + 0x400)
 #endif
-#define CFG_BOOTPARAMS_LEN	64*1024
-#define CFG_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor */
-#define CFG_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc() */
+#define CONFIG_SYS_BOOTPARAMS_LEN	64*1024
+#define CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor */
+#define CONFIG_SYS_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc() */
 
 /*
  * For booting Linux, the board info and command line data
@@ -324,67 +324,67 @@
  * the maximum mapped by the Linux kernel during initialization ??
  */
 /* Initial Memory map for Linux */
-#define CFG_BOOTMAPSZ		(CFG_SDRAM_BASE + (CFG_SDRAM_SIZE << 20))
+#define CONFIG_SYS_BOOTMAPSZ		(CONFIG_SYS_SDRAM_BASE + (CONFIG_SYS_SDRAM_SIZE << 20))
 
 /*
  * Configuration for environment
  * Environment is embedded in u-boot in the second sector of the flash
  */
 #ifdef CONFIG_CF_SBF
-#	define CFG_ENV_IS_IN_SPI_FLASH
-#	define CFG_ENV_SPI_CS		1
+#	define CONFIG_ENV_IS_IN_SPI_FLASH
+#	define CONFIG_ENV_SPI_CS		1
 #else
-#	define CFG_ENV_IS_IN_FLASH	1
+#	define CONFIG_ENV_IS_IN_FLASH	1
 #endif
 #undef CONFIG_ENV_OVERWRITE
-#undef CFG_ENV_IS_EMBEDDED
+#undef CONFIG_ENV_IS_EMBEDDED
 
 /*-----------------------------------------------------------------------
  * FLASH organization
  */
-#ifdef CFG_STMICRO_BOOT
-#	define CFG_FLASH_BASE		CFG_SER_FLASH_BASE
-#	define CFG_FLASH0_BASE		CFG_SER_FLASH_BASE
-#	define CFG_FLASH1_BASE		CFG_CS0_BASE
-#	define CFG_FLASH2_BASE		CFG_CS1_BASE
-#	define CFG_ENV_OFFSET		0x30000
-#	define CFG_ENV_SIZE		0x2000
-#	define CFG_ENV_SECT_SIZE	0x10000
+#ifdef CONFIG_SYS_STMICRO_BOOT
+#	define CONFIG_SYS_FLASH_BASE		CONFIG_SYS_SER_FLASH_BASE
+#	define CONFIG_SYS_FLASH0_BASE		CONFIG_SYS_SER_FLASH_BASE
+#	define CONFIG_SYS_FLASH1_BASE		CONFIG_SYS_CS0_BASE
+#	define CONFIG_SYS_FLASH2_BASE		CONFIG_SYS_CS1_BASE
+#	define CONFIG_ENV_OFFSET		0x30000
+#	define CONFIG_ENV_SIZE		0x2000
+#	define CONFIG_ENV_SECT_SIZE	0x10000
 #endif
-#ifdef CFG_ATMEL_BOOT
-#	define CFG_FLASH_BASE		CFG_CS0_BASE
-#	define CFG_FLASH0_BASE		CFG_CS0_BASE
-#	define CFG_FLASH1_BASE		CFG_CS1_BASE
-#	define CFG_ENV_ADDR		(CFG_FLASH_BASE + 0x4000)
-#	define CFG_ENV_SECT_SIZE	0x2000
+#ifdef CONFIG_SYS_ATMEL_BOOT
+#	define CONFIG_SYS_FLASH_BASE		CONFIG_SYS_CS0_BASE
+#	define CONFIG_SYS_FLASH0_BASE		CONFIG_SYS_CS0_BASE
+#	define CONFIG_SYS_FLASH1_BASE		CONFIG_SYS_CS1_BASE
+#	define CONFIG_ENV_ADDR		(CONFIG_SYS_FLASH_BASE + 0x4000)
+#	define CONFIG_ENV_SECT_SIZE	0x2000
 #endif
-#ifdef CFG_INTEL_BOOT
-#	define CFG_FLASH_BASE		CFG_CS0_BASE
-#	define CFG_FLASH0_BASE		CFG_CS0_BASE
-#	define CFG_FLASH1_BASE		CFG_CS1_BASE
-#	define CFG_ENV_ADDR		(CFG_FLASH_BASE + 0x40000)
-#	define CFG_ENV_SIZE		0x2000
-#	define CFG_ENV_SECT_SIZE	0x20000
+#ifdef CONFIG_SYS_INTEL_BOOT
+#	define CONFIG_SYS_FLASH_BASE		CONFIG_SYS_CS0_BASE
+#	define CONFIG_SYS_FLASH0_BASE		CONFIG_SYS_CS0_BASE
+#	define CONFIG_SYS_FLASH1_BASE		CONFIG_SYS_CS1_BASE
+#	define CONFIG_ENV_ADDR		(CONFIG_SYS_FLASH_BASE + 0x40000)
+#	define CONFIG_ENV_SIZE		0x2000
+#	define CONFIG_ENV_SECT_SIZE	0x20000
 #endif
 
-#define CFG_FLASH_CFI
-#ifdef CFG_FLASH_CFI
+#define CONFIG_SYS_FLASH_CFI
+#ifdef CONFIG_SYS_FLASH_CFI
 
 #	define CONFIG_FLASH_CFI_DRIVER	1
-#	define CFG_FLASH_SIZE		0x1000000	/* Max size that the board might have */
-#	define CFG_FLASH_CFI_WIDTH	FLASH_CFI_8BIT
-#	define CFG_MAX_FLASH_BANKS	2	/* max number of memory banks */
-#	define CFG_MAX_FLASH_SECT	137	/* max number of sectors on one chip */
-#	define CFG_FLASH_PROTECTION	/* "Real" (hardware) sectors protection */
-#	define CFG_FLASH_CHECKSUM
-#	define CFG_FLASH_BANKS_LIST	{ CFG_CS0_BASE, CFG_CS1_BASE }
+#	define CONFIG_SYS_FLASH_SIZE		0x1000000	/* Max size that the board might have */
+#	define CONFIG_SYS_FLASH_CFI_WIDTH	FLASH_CFI_8BIT
+#	define CONFIG_SYS_MAX_FLASH_BANKS	2	/* max number of memory banks */
+#	define CONFIG_SYS_MAX_FLASH_SECT	137	/* max number of sectors on one chip */
+#	define CONFIG_SYS_FLASH_PROTECTION	/* "Real" (hardware) sectors protection */
+#	define CONFIG_SYS_FLASH_CHECKSUM
+#	define CONFIG_SYS_FLASH_BANKS_LIST	{ CONFIG_SYS_CS0_BASE, CONFIG_SYS_CS1_BASE }
 #	define CONFIG_FLASH_CFI_LEGACY
 
 #ifdef CONFIG_FLASH_CFI_LEGACY
-#	define CFG_ATMEL_REGION		4
-#	define CFG_ATMEL_TOTALSECT	11
-#	define CFG_ATMEL_SECT		{1, 2, 1, 7}
-#	define CFG_ATMEL_SECTSZ		{0x4000, 0x2000, 0x8000, 0x10000}
+#	define CONFIG_SYS_ATMEL_REGION		4
+#	define CONFIG_SYS_ATMEL_TOTALSECT	11
+#	define CONFIG_SYS_ATMEL_SECT		{1, 2, 1, 7}
+#	define CONFIG_SYS_ATMEL_SECTSZ		{0x4000, 0x2000, 0x8000, 0x10000}
 #endif
 #endif
 
@@ -396,24 +396,24 @@
 #ifdef CF_STMICRO_BOOT
 #	define CONFIG_JFFS2_DEV		"nor1"
 #	define CONFIG_JFFS2_PART_SIZE	0x01000000
-#	define CONFIG_JFFS2_PART_OFFSET	(CFG_FLASH2_BASE + 0x500000)
+#	define CONFIG_JFFS2_PART_OFFSET	(CONFIG_SYS_FLASH2_BASE + 0x500000)
 #endif
-#ifdef CFG_ATMEL_BOOT
+#ifdef CONFIG_SYS_ATMEL_BOOT
 #	define CONFIG_JFFS2_DEV		"nor1"
 #	define CONFIG_JFFS2_PART_SIZE	0x01000000
-#	define CONFIG_JFFS2_PART_OFFSET	(CFG_FLASH1_BASE + 0x500000)
+#	define CONFIG_JFFS2_PART_OFFSET	(CONFIG_SYS_FLASH1_BASE + 0x500000)
 #endif
-#ifdef CFG_INTEL_BOOT
+#ifdef CONFIG_SYS_INTEL_BOOT
 #	define CONFIG_JFFS2_DEV		"nor0"
 #	define CONFIG_JFFS2_PART_SIZE	(0x01000000 - 0x500000)
-#	define CONFIG_JFFS2_PART_OFFSET	(CFG_FLASH0_BASE + 0x500000)
+#	define CONFIG_JFFS2_PART_OFFSET	(CONFIG_SYS_FLASH0_BASE + 0x500000)
 #endif
 #endif
 
 /*-----------------------------------------------------------------------
  * Cache Configuration
  */
-#define CFG_CACHELINE_SIZE		16
+#define CONFIG_SYS_CACHELINE_SIZE		16
 
 /*-----------------------------------------------------------------------
  * Memory bank definitions
@@ -427,38 +427,38 @@
  * CS5 - Available
  */
 
-#if defined(CFG_ATMEL_BOOT) || defined(CFG_STMICRO_BOOT)
+#if defined(CONFIG_SYS_ATMEL_BOOT) || defined(CONFIG_SYS_STMICRO_BOOT)
  /* Atmel Flash */
-#define CFG_CS0_BASE		0x04000000
-#define CFG_CS0_MASK		0x00070001
-#define CFG_CS0_CTRL		0x00001140
+#define CONFIG_SYS_CS0_BASE		0x04000000
+#define CONFIG_SYS_CS0_MASK		0x00070001
+#define CONFIG_SYS_CS0_CTRL		0x00001140
 /* Intel Flash */
-#define CFG_CS1_BASE		0x00000000
-#define CFG_CS1_MASK		0x01FF0001
-#define CFG_CS1_CTRL		0x00000D60
+#define CONFIG_SYS_CS1_BASE		0x00000000
+#define CONFIG_SYS_CS1_MASK		0x01FF0001
+#define CONFIG_SYS_CS1_CTRL		0x00000D60
 
-#define CFG_ATMEL_BASE		CFG_CS0_BASE
+#define CONFIG_SYS_ATMEL_BASE		CONFIG_SYS_CS0_BASE
 #else
 /* Intel Flash */
-#define CFG_CS0_BASE		0x00000000
-#define CFG_CS0_MASK		0x01FF0001
-#define CFG_CS0_CTRL		0x00000D60
+#define CONFIG_SYS_CS0_BASE		0x00000000
+#define CONFIG_SYS_CS0_MASK		0x01FF0001
+#define CONFIG_SYS_CS0_CTRL		0x00000D60
  /* Atmel Flash */
-#define CFG_CS1_BASE		0x04000000
-#define CFG_CS1_MASK		0x00070001
-#define CFG_CS1_CTRL		0x00001140
+#define CONFIG_SYS_CS1_BASE		0x04000000
+#define CONFIG_SYS_CS1_MASK		0x00070001
+#define CONFIG_SYS_CS1_CTRL		0x00001140
 
-#define CFG_ATMEL_BASE		CFG_CS1_BASE
+#define CONFIG_SYS_ATMEL_BASE		CONFIG_SYS_CS1_BASE
 #endif
 
 /* CPLD */
-#define CFG_CS2_BASE		0x08000000
-#define CFG_CS2_MASK		0x00070001
-#define CFG_CS2_CTRL		0x003f1140
+#define CONFIG_SYS_CS2_BASE		0x08000000
+#define CONFIG_SYS_CS2_MASK		0x00070001
+#define CONFIG_SYS_CS2_CTRL		0x003f1140
 
 /* FPGA */
-#define CFG_CS3_BASE		0x09000000
-#define CFG_CS3_MASK		0x00070001
-#define CFG_CS3_CTRL		0x00000020
+#define CONFIG_SYS_CS3_BASE		0x09000000
+#define CONFIG_SYS_CS3_MASK		0x00070001
+#define CONFIG_SYS_CS3_CTRL		0x00000020
 
 #endif				/* _M54455EVB_H */
diff --git a/include/configs/M5475EVB.h b/include/configs/M5475EVB.h
index af6723c63..e48de15f7 100644
--- a/include/configs/M5475EVB.h
+++ b/include/configs/M5475EVB.h
@@ -39,9 +39,9 @@
 #define CONFIG_M5475		/* define processor type */
 
 #define CONFIG_MCFUART
-#define CFG_UART_PORT		(0)
+#define CONFIG_SYS_UART_PORT		(0)
 #define CONFIG_BAUDRATE		115200
-#define CFG_BAUDRATE_TABLE	{ 9600 , 19200 , 38400 , 57600, 115200 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600 , 19200 , 38400 , 57600, 115200 }
 
 #define CONFIG_HW_WATCHDOG
 #define CONFIG_WATCHDOG_TIMEOUT	5000	/* timeout in milliseconds, max timeout is 6.71sec */
@@ -72,27 +72,27 @@
 #	define CONFIG_MII_INIT		1
 #	define CONFIG_HAS_ETH1
 
-#	define CFG_DMA_USE_INTSRAM	1
-#	define CFG_DISCOVER_PHY
-#	define CFG_RX_ETH_BUFFER	32
-#	define CFG_TX_ETH_BUFFER	48
-#	define CFG_FAULT_ECHO_LINK_DOWN
+#	define CONFIG_SYS_DMA_USE_INTSRAM	1
+#	define CONFIG_SYS_DISCOVER_PHY
+#	define CONFIG_SYS_RX_ETH_BUFFER	32
+#	define CONFIG_SYS_TX_ETH_BUFFER	48
+#	define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
 
-#	define CFG_FEC0_PINMUX		0
-#	define CFG_FEC0_MIIBASE		CFG_FEC0_IOBASE
-#	define CFG_FEC1_PINMUX		0
-#	define CFG_FEC1_MIIBASE		CFG_FEC0_IOBASE
+#	define CONFIG_SYS_FEC0_PINMUX		0
+#	define CONFIG_SYS_FEC0_MIIBASE		CONFIG_SYS_FEC0_IOBASE
+#	define CONFIG_SYS_FEC1_PINMUX		0
+#	define CONFIG_SYS_FEC1_MIIBASE		CONFIG_SYS_FEC0_IOBASE
 
 #	define MCFFEC_TOUT_LOOP		50000
-/* If CFG_DISCOVER_PHY is not defined - hardcoded */
-#	ifndef CFG_DISCOVER_PHY
+/* If CONFIG_SYS_DISCOVER_PHY is not defined - hardcoded */
+#	ifndef CONFIG_SYS_DISCOVER_PHY
 #		define FECDUPLEX	FULL
 #		define FECSPEED		_100BASET
 #	else
-#		ifndef CFG_FAULT_ECHO_LINK_DOWN
-#			define CFG_FAULT_ECHO_LINK_DOWN
+#		ifndef CONFIG_SYS_FAULT_ECHO_LINK_DOWN
+#			define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
 #		endif
-#	endif			/* CFG_DISCOVER_PHY */
+#	endif			/* CONFIG_SYS_DISCOVER_PHY */
 
 #	define CONFIG_ETHADDR	00:e0:0c:bc:e5:60
 #	define CONFIG_ETH1ADDR	00:e0:0c:bc:e5:61
@@ -114,21 +114,21 @@
 #	define CONFIG_PCI_OHCI
 #	define CONFIG_DOS_PARTITION
 
-#	undef CFG_USB_OHCI_BOARD_INIT
-#	undef CFG_USB_OHCI_CPU_INIT
-#	define CFG_USB_OHCI_MAX_ROOT_PORTS	15
-#	define CFG_USB_OHCI_SLOT_NAME		"isp1561"
-#	define CFG_OHCI_SWAP_REG_ACCESS
+#	undef CONFIG_SYS_USB_OHCI_BOARD_INIT
+#	undef CONFIG_SYS_USB_OHCI_CPU_INIT
+#	define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS	15
+#	define CONFIG_SYS_USB_OHCI_SLOT_NAME		"isp1561"
+#	define CONFIG_SYS_OHCI_SWAP_REG_ACCESS
 #endif
 
 /* I2C */
 #define CONFIG_FSL_I2C
 #define CONFIG_HARD_I2C		/* I2C with hw support */
 #undef CONFIG_SOFT_I2C		/* I2C bit-banged */
-#define CFG_I2C_SPEED		80000
-#define CFG_I2C_SLAVE		0x7F
-#define CFG_I2C_OFFSET		0x00008F00
-#define CFG_IMMR		CFG_MBAR
+#define CONFIG_SYS_I2C_SPEED		80000
+#define CONFIG_SYS_I2C_SLAVE		0x7F
+#define CONFIG_SYS_I2C_OFFSET		0x00008F00
+#define CONFIG_SYS_IMMR		CONFIG_SYS_MBAR
 
 /* PCI */
 #ifdef CONFIG_CMD_PCI
@@ -136,19 +136,19 @@
 #define CONFIG_PCI_PNP		1
 #define CONFIG_PCIAUTO_SKIP_HOST_BRIDGE	1
 
-#define CFG_PCI_CACHE_LINE_SIZE	8
+#define CONFIG_SYS_PCI_CACHE_LINE_SIZE	8
 
-#define CFG_PCI_MEM_BUS		0x80000000
-#define CFG_PCI_MEM_PHYS	CFG_PCI_MEM_BUS
-#define CFG_PCI_MEM_SIZE	0x10000000
+#define CONFIG_SYS_PCI_MEM_BUS		0x80000000
+#define CONFIG_SYS_PCI_MEM_PHYS	CONFIG_SYS_PCI_MEM_BUS
+#define CONFIG_SYS_PCI_MEM_SIZE	0x10000000
 
-#define CFG_PCI_IO_BUS		0x71000000
-#define CFG_PCI_IO_PHYS		CFG_PCI_IO_BUS
-#define CFG_PCI_IO_SIZE		0x01000000
+#define CONFIG_SYS_PCI_IO_BUS		0x71000000
+#define CONFIG_SYS_PCI_IO_PHYS		CONFIG_SYS_PCI_IO_BUS
+#define CONFIG_SYS_PCI_IO_SIZE		0x01000000
 
-#define CFG_PCI_CFG_BUS		0x70000000
-#define CFG_PCI_CFG_PHYS	CFG_PCI_CFG_BUS
-#define CFG_PCI_CFG_SIZE	0x01000000
+#define CONFIG_SYS_PCI_CFG_BUS		0x70000000
+#define CONFIG_SYS_PCI_CFG_PHYS	CONFIG_SYS_PCI_CFG_BUS
+#define CONFIG_SYS_PCI_CFG_SIZE	0x01000000
 #endif
 
 #define CONFIG_BOOTDELAY	1	/* autoboot after 5 seconds */
@@ -177,29 +177,29 @@
 	""
 
 #define CONFIG_PRAM		512	/* 512 KB */
-#define CFG_PROMPT		"-> "
-#define CFG_LONGHELP		/* undef to save memory */
+#define CONFIG_SYS_PROMPT		"-> "
+#define CONFIG_SYS_LONGHELP		/* undef to save memory */
 
 #ifdef CONFIG_CMD_KGDB
-#	define CFG_CBSIZE	1024	/* Console I/O Buffer Size */
+#	define CONFIG_SYS_CBSIZE	1024	/* Console I/O Buffer Size */
 #else
-#	define CFG_CBSIZE	256	/* Console I/O Buffer Size */
+#	define CONFIG_SYS_CBSIZE	256	/* Console I/O Buffer Size */
 #endif
 
-#define CFG_PBSIZE		(CFG_CBSIZE+sizeof(CFG_PROMPT)+16)	/* Print Buffer Size */
-#define CFG_MAXARGS		16	/* max number of command args */
-#define CFG_BARGSIZE		CFG_CBSIZE	/* Boot Argument Buffer Size    */
-#define CFG_LOAD_ADDR		0x00010000
+#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)	/* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS		16	/* max number of command args */
+#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size    */
+#define CONFIG_SYS_LOAD_ADDR		0x00010000
 
-#define CFG_HZ			1000
-#define CFG_CLK			CFG_BUSCLK
-#define CFG_CPU_CLK		CFG_CLK * 2
+#define CONFIG_SYS_HZ			1000
+#define CONFIG_SYS_CLK			CONFIG_SYS_BUSCLK
+#define CONFIG_SYS_CPU_CLK		CONFIG_SYS_CLK * 2
 
-#define CFG_MBAR		0xF0000000
-#define CFG_INTSRAM		(CFG_MBAR + 0x10000)
-#define CFG_INTSRAMSZ		0x8000
+#define CONFIG_SYS_MBAR		0xF0000000
+#define CONFIG_SYS_INTSRAM		(CONFIG_SYS_MBAR + 0x10000)
+#define CONFIG_SYS_INTSRAMSZ		0x8000
 
-/*#define CFG_LATCH_ADDR		(CFG_CS1_BASE + 0x80000)*/
+/*#define CONFIG_SYS_LATCH_ADDR		(CONFIG_SYS_CS1_BASE + 0x80000)*/
 
 /*
  * Low Level Configuration Settings
@@ -209,83 +209,83 @@
 /*-----------------------------------------------------------------------
  * Definitions for initial stack pointer and data area (in DPRAM)
  */
-#define CFG_INIT_RAM_ADDR	0xF2000000
-#define CFG_INIT_RAM_END	0x1000	/* End of used area in internal SRAM */
-#define CFG_INIT_RAM_CTRL	0x21
-#define CFG_INIT_RAM1_ADDR	(CFG_INIT_RAM_ADDR + CFG_INIT_RAM_END)
-#define CFG_INIT_RAM1_END	0x1000	/* End of used area in internal SRAM */
-#define CFG_INIT_RAM1_CTRL	0x21
-#define CFG_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
-#define CFG_GBL_DATA_OFFSET	((CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) - 0x10)
-#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_INIT_RAM_ADDR	0xF2000000
+#define CONFIG_SYS_INIT_RAM_END	0x1000	/* End of used area in internal SRAM */
+#define CONFIG_SYS_INIT_RAM_CTRL	0x21
+#define CONFIG_SYS_INIT_RAM1_ADDR	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_RAM_END)
+#define CONFIG_SYS_INIT_RAM1_END	0x1000	/* End of used area in internal SRAM */
+#define CONFIG_SYS_INIT_RAM1_CTRL	0x21
+#define CONFIG_SYS_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET	((CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) - 0x10)
+#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
 /*-----------------------------------------------------------------------
  * Start addresses for the final memory configuration
  * (Set up by the startup code)
- * Please note that CFG_SDRAM_BASE _must_ start at 0
+ * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
  */
-#define CFG_SDRAM_BASE		0x00000000
-#define CFG_SDRAM_CFG1		0x73711630
-#define CFG_SDRAM_CFG2		0x46770000
-#define CFG_SDRAM_CTRL		0xE10B0000
-#define CFG_SDRAM_EMOD		0x40010000
-#define CFG_SDRAM_MODE		0x018D0000
-#define CFG_SDRAM_DRVSTRENGTH	0x000002AA
-#ifdef CFG_DRAMSZ1
-#	define CFG_SDRAM_SIZE	(CFG_DRAMSZ + CFG_DRAMSZ1)
+#define CONFIG_SYS_SDRAM_BASE		0x00000000
+#define CONFIG_SYS_SDRAM_CFG1		0x73711630
+#define CONFIG_SYS_SDRAM_CFG2		0x46770000
+#define CONFIG_SYS_SDRAM_CTRL		0xE10B0000
+#define CONFIG_SYS_SDRAM_EMOD		0x40010000
+#define CONFIG_SYS_SDRAM_MODE		0x018D0000
+#define CONFIG_SYS_SDRAM_DRVSTRENGTH	0x000002AA
+#ifdef CONFIG_SYS_DRAMSZ1
+#	define CONFIG_SYS_SDRAM_SIZE	(CONFIG_SYS_DRAMSZ + CONFIG_SYS_DRAMSZ1)
 #else
-#	define CFG_SDRAM_SIZE	CFG_DRAMSZ
+#	define CONFIG_SYS_SDRAM_SIZE	CONFIG_SYS_DRAMSZ
 #endif
 
-#define CFG_MEMTEST_START	CFG_SDRAM_BASE + 0x400
-#define CFG_MEMTEST_END		((CFG_SDRAM_SIZE - 3) << 20)
+#define CONFIG_SYS_MEMTEST_START	CONFIG_SYS_SDRAM_BASE + 0x400
+#define CONFIG_SYS_MEMTEST_END		((CONFIG_SYS_SDRAM_SIZE - 3) << 20)
 
-#define CFG_MONITOR_BASE	(CFG_FLASH_BASE + 0x400)
-#define CFG_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor */
+#define CONFIG_SYS_MONITOR_BASE	(CONFIG_SYS_FLASH_BASE + 0x400)
+#define CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor */
 
-#define CFG_BOOTPARAMS_LEN	64*1024
-#define CFG_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc() */
+#define CONFIG_SYS_BOOTPARAMS_LEN	64*1024
+#define CONFIG_SYS_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc() */
 
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization ??
  */
-#define CFG_BOOTMAPSZ		(CFG_SDRAM_BASE + (CFG_SDRAM_SIZE << 20))
+#define CONFIG_SYS_BOOTMAPSZ		(CONFIG_SYS_SDRAM_BASE + (CONFIG_SYS_SDRAM_SIZE << 20))
 
 /*-----------------------------------------------------------------------
  * FLASH organization
  */
-#define CFG_FLASH_CFI
-#ifdef CFG_FLASH_CFI
-#	define CFG_FLASH_BASE		(CFG_CS0_BASE)
+#define CONFIG_SYS_FLASH_CFI
+#ifdef CONFIG_SYS_FLASH_CFI
+#	define CONFIG_SYS_FLASH_BASE		(CONFIG_SYS_CS0_BASE)
 #	define CONFIG_FLASH_CFI_DRIVER	1
-#	define CFG_FLASH_CFI_WIDTH	FLASH_CFI_16BIT
-#	define CFG_MAX_FLASH_SECT	137	/* max number of sectors on one chip */
-#	define CFG_FLASH_PROTECTION	/* "Real" (hardware) sectors protection */
-#	define CFG_FLASH_USE_BUFFER_WRITE
-#ifdef CFG_NOR1SZ
-#	define CFG_MAX_FLASH_BANKS	2	/* max number of memory banks */
-#	define CFG_FLASH_SIZE		((CFG_NOR1SZ + CFG_BOOTSZ) << 20)
-#	define CFG_FLASH_BANKS_LIST	{ CFG_CS0_BASE, CFG_CS1_BASE }
+#	define CONFIG_SYS_FLASH_CFI_WIDTH	FLASH_CFI_16BIT
+#	define CONFIG_SYS_MAX_FLASH_SECT	137	/* max number of sectors on one chip */
+#	define CONFIG_SYS_FLASH_PROTECTION	/* "Real" (hardware) sectors protection */
+#	define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
+#ifdef CONFIG_SYS_NOR1SZ
+#	define CONFIG_SYS_MAX_FLASH_BANKS	2	/* max number of memory banks */
+#	define CONFIG_SYS_FLASH_SIZE		((CONFIG_SYS_NOR1SZ + CONFIG_SYS_BOOTSZ) << 20)
+#	define CONFIG_SYS_FLASH_BANKS_LIST	{ CONFIG_SYS_CS0_BASE, CONFIG_SYS_CS1_BASE }
 #else
-#	define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks */
-#	define CFG_FLASH_SIZE		(CFG_BOOTSZ << 20)
+#	define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks */
+#	define CONFIG_SYS_FLASH_SIZE		(CONFIG_SYS_BOOTSZ << 20)
 #endif
 #endif
 
 /* Configuration for environment
  * Environment is embedded in u-boot in the second sector of the flash
  */
-#define CFG_ENV_OFFSET		0x2000
-#define CFG_ENV_SECT_SIZE	0x2000
-#define CFG_ENV_IS_IN_FLASH	1
-#define CFG_ENV_IS_EMBEDDED	1
+#define CONFIG_ENV_OFFSET		0x2000
+#define CONFIG_ENV_SECT_SIZE	0x2000
+#define CONFIG_ENV_IS_IN_FLASH	1
+#define CONFIG_ENV_IS_EMBEDDED	1
 
 /*-----------------------------------------------------------------------
  * Cache Configuration
  */
-#define CFG_CACHELINE_SIZE	16
+#define CONFIG_SYS_CACHELINE_SIZE	16
 
 /*-----------------------------------------------------------------------
  * Chipselect bank definitions
@@ -298,14 +298,14 @@
  * CS4 - Available
  * CS5 - Available
  */
-#define CFG_CS0_BASE		0xFF800000
-#define CFG_CS0_MASK		(((CFG_BOOTSZ << 20) - 1) & 0xFFFF0001)
-#define CFG_CS0_CTRL		0x00101980
-
-#ifdef CFG_NOR1SZ
-#define CFG_CS1_BASE		0xE0000000
-#define CFG_CS1_MASK		(((CFG_NOR1SZ << 20) - 1) & 0xFFFF0001)
-#define CFG_CS1_CTRL		0x00101D80
+#define CONFIG_SYS_CS0_BASE		0xFF800000
+#define CONFIG_SYS_CS0_MASK		(((CONFIG_SYS_BOOTSZ << 20) - 1) & 0xFFFF0001)
+#define CONFIG_SYS_CS0_CTRL		0x00101980
+
+#ifdef CONFIG_SYS_NOR1SZ
+#define CONFIG_SYS_CS1_BASE		0xE0000000
+#define CONFIG_SYS_CS1_MASK		(((CONFIG_SYS_NOR1SZ << 20) - 1) & 0xFFFF0001)
+#define CONFIG_SYS_CS1_CTRL		0x00101D80
 #endif
 
 #endif				/* _M5475EVB_H */
diff --git a/include/configs/M5485EVB.h b/include/configs/M5485EVB.h
index 248db53d9..28bf0adcf 100644
--- a/include/configs/M5485EVB.h
+++ b/include/configs/M5485EVB.h
@@ -39,9 +39,9 @@
 #define CONFIG_M5485		/* define processor type */
 
 #define CONFIG_MCFUART
-#define CFG_UART_PORT		(0)
+#define CONFIG_SYS_UART_PORT		(0)
 #define CONFIG_BAUDRATE		115200
-#define CFG_BAUDRATE_TABLE	{ 9600 , 19200 , 38400 , 57600, 115200 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600 , 19200 , 38400 , 57600, 115200 }
 
 #define CONFIG_HW_WATCHDOG
 #define CONFIG_WATCHDOG_TIMEOUT	5000	/* timeout in milliseconds, max timeout is 6.71sec */
@@ -72,27 +72,27 @@
 #	define CONFIG_MII_INIT		1
 #	define CONFIG_HAS_ETH1
 
-#	define CFG_DMA_USE_INTSRAM	1
-#	define CFG_DISCOVER_PHY
-#	define CFG_RX_ETH_BUFFER	32
-#	define CFG_TX_ETH_BUFFER	48
-#	define CFG_FAULT_ECHO_LINK_DOWN
+#	define CONFIG_SYS_DMA_USE_INTSRAM	1
+#	define CONFIG_SYS_DISCOVER_PHY
+#	define CONFIG_SYS_RX_ETH_BUFFER	32
+#	define CONFIG_SYS_TX_ETH_BUFFER	48
+#	define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
 
-#	define CFG_FEC0_PINMUX		0
-#	define CFG_FEC0_MIIBASE		CFG_FEC0_IOBASE
-#	define CFG_FEC1_PINMUX		0
-#	define CFG_FEC1_MIIBASE		CFG_FEC0_IOBASE
+#	define CONFIG_SYS_FEC0_PINMUX		0
+#	define CONFIG_SYS_FEC0_MIIBASE		CONFIG_SYS_FEC0_IOBASE
+#	define CONFIG_SYS_FEC1_PINMUX		0
+#	define CONFIG_SYS_FEC1_MIIBASE		CONFIG_SYS_FEC0_IOBASE
 
 #	define MCFFEC_TOUT_LOOP		50000
-/* If CFG_DISCOVER_PHY is not defined - hardcoded */
-#	ifndef CFG_DISCOVER_PHY
+/* If CONFIG_SYS_DISCOVER_PHY is not defined - hardcoded */
+#	ifndef CONFIG_SYS_DISCOVER_PHY
 #		define FECDUPLEX	FULL
 #		define FECSPEED		_100BASET
 #	else
-#		ifndef CFG_FAULT_ECHO_LINK_DOWN
-#			define CFG_FAULT_ECHO_LINK_DOWN
+#		ifndef CONFIG_SYS_FAULT_ECHO_LINK_DOWN
+#			define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
 #		endif
-#	endif			/* CFG_DISCOVER_PHY */
+#	endif			/* CONFIG_SYS_DISCOVER_PHY */
 
 #	define CONFIG_ETHADDR	00:e0:0c:bc:e5:60
 #	define CONFIG_ETH1ADDR	00:e0:0c:bc:e5:61
@@ -112,20 +112,20 @@
 #		define CONFIG_CMD_PCI
 #	endif
 /*#	define CONFIG_PCI_OHCI*/
-#	define CFG_USB_OHCI_REGS_BASE		0x80041000
-#	define CFG_USB_OHCI_MAX_ROOT_PORTS	15
-#	define CFG_USB_OHCI_SLOT_NAME		"isp1561"
-#	define CFG_OHCI_SWAP_REG_ACCESS
+#	define CONFIG_SYS_USB_OHCI_REGS_BASE		0x80041000
+#	define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS	15
+#	define CONFIG_SYS_USB_OHCI_SLOT_NAME		"isp1561"
+#	define CONFIG_SYS_OHCI_SWAP_REG_ACCESS
 #endif
 
 /* I2C */
 #define CONFIG_FSL_I2C
 #define CONFIG_HARD_I2C		/* I2C with hw support */
 #undef CONFIG_SOFT_I2C		/* I2C bit-banged */
-#define CFG_I2C_SPEED		80000
-#define CFG_I2C_SLAVE		0x7F
-#define CFG_I2C_OFFSET		0x00008F00
-#define CFG_IMMR		CFG_MBAR
+#define CONFIG_SYS_I2C_SPEED		80000
+#define CONFIG_SYS_I2C_SLAVE		0x7F
+#define CONFIG_SYS_I2C_OFFSET		0x00008F00
+#define CONFIG_SYS_IMMR		CONFIG_SYS_MBAR
 
 /* PCI */
 #ifdef CONFIG_CMD_PCI
@@ -133,17 +133,17 @@
 #define CONFIG_PCI_PNP		1
 #define CONFIG_PCIAUTO_SKIP_HOST_BRIDGE	1
 
-#define CFG_PCI_MEM_BUS		0x80000000
-#define CFG_PCI_MEM_PHYS	CFG_PCI_MEM_BUS
-#define CFG_PCI_MEM_SIZE	0x10000000
+#define CONFIG_SYS_PCI_MEM_BUS		0x80000000
+#define CONFIG_SYS_PCI_MEM_PHYS	CONFIG_SYS_PCI_MEM_BUS
+#define CONFIG_SYS_PCI_MEM_SIZE	0x10000000
 
-#define CFG_PCI_IO_BUS		0x71000000
-#define CFG_PCI_IO_PHYS		CFG_PCI_IO_BUS
-#define CFG_PCI_IO_SIZE		0x01000000
+#define CONFIG_SYS_PCI_IO_BUS		0x71000000
+#define CONFIG_SYS_PCI_IO_PHYS		CONFIG_SYS_PCI_IO_BUS
+#define CONFIG_SYS_PCI_IO_SIZE		0x01000000
 
-#define CFG_PCI_CFG_BUS		0x70000000
-#define CFG_PCI_CFG_PHYS	CFG_PCI_CFG_BUS
-#define CFG_PCI_CFG_SIZE	0x01000000
+#define CONFIG_SYS_PCI_CFG_BUS		0x70000000
+#define CONFIG_SYS_PCI_CFG_PHYS	CONFIG_SYS_PCI_CFG_BUS
+#define CONFIG_SYS_PCI_CFG_SIZE	0x01000000
 #endif
 
 #define CONFIG_BOOTDELAY	1	/* autoboot after 5 seconds */
@@ -163,29 +163,29 @@
 	""
 
 #define CONFIG_PRAM		512	/* 512 KB */
-#define CFG_PROMPT		"-> "
-#define CFG_LONGHELP		/* undef to save memory */
+#define CONFIG_SYS_PROMPT		"-> "
+#define CONFIG_SYS_LONGHELP		/* undef to save memory */
 
 #ifdef CONFIG_CMD_KGDB
-#	define CFG_CBSIZE	1024	/* Console I/O Buffer Size */
+#	define CONFIG_SYS_CBSIZE	1024	/* Console I/O Buffer Size */
 #else
-#	define CFG_CBSIZE	256	/* Console I/O Buffer Size */
+#	define CONFIG_SYS_CBSIZE	256	/* Console I/O Buffer Size */
 #endif
 
-#define CFG_PBSIZE		(CFG_CBSIZE+sizeof(CFG_PROMPT)+16)	/* Print Buffer Size */
-#define CFG_MAXARGS		16	/* max number of command args */
-#define CFG_BARGSIZE		CFG_CBSIZE	/* Boot Argument Buffer Size    */
-#define CFG_LOAD_ADDR		0x00010000
+#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)	/* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS		16	/* max number of command args */
+#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size    */
+#define CONFIG_SYS_LOAD_ADDR		0x00010000
 
-#define CFG_HZ			1000
-#define CFG_CLK			CFG_BUSCLK
-#define CFG_CPU_CLK		CFG_CLK * 2
+#define CONFIG_SYS_HZ			1000
+#define CONFIG_SYS_CLK			CONFIG_SYS_BUSCLK
+#define CONFIG_SYS_CPU_CLK		CONFIG_SYS_CLK * 2
 
-#define CFG_MBAR		0xF0000000
-#define CFG_INTSRAM		(CFG_MBAR + 0x10000)
-#define CFG_INTSRAMSZ		0x8000
+#define CONFIG_SYS_MBAR		0xF0000000
+#define CONFIG_SYS_INTSRAM		(CONFIG_SYS_MBAR + 0x10000)
+#define CONFIG_SYS_INTSRAMSZ		0x8000
 
-/*#define CFG_LATCH_ADDR		(CFG_CS1_BASE + 0x80000)*/
+/*#define CONFIG_SYS_LATCH_ADDR		(CONFIG_SYS_CS1_BASE + 0x80000)*/
 
 /*
  * Low Level Configuration Settings
@@ -195,83 +195,83 @@
 /*-----------------------------------------------------------------------
  * Definitions for initial stack pointer and data area (in DPRAM)
  */
-#define CFG_INIT_RAM_ADDR	0xF2000000
-#define CFG_INIT_RAM_END	0x1000	/* End of used area in internal SRAM */
-#define CFG_INIT_RAM_CTRL	0x21
-#define CFG_INIT_RAM1_ADDR	(CFG_INIT_RAM_ADDR + CFG_INIT_RAM_END)
-#define CFG_INIT_RAM1_END	0x1000	/* End of used area in internal SRAM */
-#define CFG_INIT_RAM1_CTRL	0x21
-#define CFG_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
-#define CFG_GBL_DATA_OFFSET	((CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) - 0x10)
-#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_INIT_RAM_ADDR	0xF2000000
+#define CONFIG_SYS_INIT_RAM_END	0x1000	/* End of used area in internal SRAM */
+#define CONFIG_SYS_INIT_RAM_CTRL	0x21
+#define CONFIG_SYS_INIT_RAM1_ADDR	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_RAM_END)
+#define CONFIG_SYS_INIT_RAM1_END	0x1000	/* End of used area in internal SRAM */
+#define CONFIG_SYS_INIT_RAM1_CTRL	0x21
+#define CONFIG_SYS_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET	((CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) - 0x10)
+#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
 /*-----------------------------------------------------------------------
  * Start addresses for the final memory configuration
  * (Set up by the startup code)
- * Please note that CFG_SDRAM_BASE _must_ start at 0
+ * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
  */
-#define CFG_SDRAM_BASE		0x00000000
-#define CFG_SDRAM_CFG1		0x73711630
-#define CFG_SDRAM_CFG2		0x46770000
-#define CFG_SDRAM_CTRL		0xE10B0000
-#define CFG_SDRAM_EMOD		0x40010000
-#define CFG_SDRAM_MODE		0x018D0000
-#define CFG_SDRAM_DRVSTRENGTH	0x000002AA
-#ifdef CFG_DRAMSZ1
-#	define CFG_SDRAM_SIZE	(CFG_DRAMSZ + CFG_DRAMSZ1)
+#define CONFIG_SYS_SDRAM_BASE		0x00000000
+#define CONFIG_SYS_SDRAM_CFG1		0x73711630
+#define CONFIG_SYS_SDRAM_CFG2		0x46770000
+#define CONFIG_SYS_SDRAM_CTRL		0xE10B0000
+#define CONFIG_SYS_SDRAM_EMOD		0x40010000
+#define CONFIG_SYS_SDRAM_MODE		0x018D0000
+#define CONFIG_SYS_SDRAM_DRVSTRENGTH	0x000002AA
+#ifdef CONFIG_SYS_DRAMSZ1
+#	define CONFIG_SYS_SDRAM_SIZE	(CONFIG_SYS_DRAMSZ + CONFIG_SYS_DRAMSZ1)
 #else
-#	define CFG_SDRAM_SIZE	CFG_DRAMSZ
+#	define CONFIG_SYS_SDRAM_SIZE	CONFIG_SYS_DRAMSZ
 #endif
 
-#define CFG_MEMTEST_START	CFG_SDRAM_BASE + 0x400
-#define CFG_MEMTEST_END		((CFG_SDRAM_SIZE - 3) << 20)
+#define CONFIG_SYS_MEMTEST_START	CONFIG_SYS_SDRAM_BASE + 0x400
+#define CONFIG_SYS_MEMTEST_END		((CONFIG_SYS_SDRAM_SIZE - 3) << 20)
 
-#define CFG_MONITOR_BASE	(CFG_FLASH_BASE + 0x400)
-#define CFG_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor */
+#define CONFIG_SYS_MONITOR_BASE	(CONFIG_SYS_FLASH_BASE + 0x400)
+#define CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor */
 
-#define CFG_BOOTPARAMS_LEN	64*1024
-#define CFG_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc() */
+#define CONFIG_SYS_BOOTPARAMS_LEN	64*1024
+#define CONFIG_SYS_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc() */
 
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization ??
  */
-#define CFG_BOOTMAPSZ		(CFG_SDRAM_BASE + (CFG_SDRAM_SIZE << 20))
+#define CONFIG_SYS_BOOTMAPSZ		(CONFIG_SYS_SDRAM_BASE + (CONFIG_SYS_SDRAM_SIZE << 20))
 
 /*-----------------------------------------------------------------------
  * FLASH organization
  */
-#define CFG_FLASH_CFI
-#ifdef CFG_FLASH_CFI
-#	define CFG_FLASH_BASE		(CFG_CS0_BASE)
+#define CONFIG_SYS_FLASH_CFI
+#ifdef CONFIG_SYS_FLASH_CFI
+#	define CONFIG_SYS_FLASH_BASE		(CONFIG_SYS_CS0_BASE)
 #	define CONFIG_FLASH_CFI_DRIVER	1
-#	define CFG_FLASH_CFI_WIDTH	FLASH_CFI_16BIT
-#	define CFG_MAX_FLASH_SECT	137	/* max number of sectors on one chip */
-#	define CFG_FLASH_PROTECTION	/* "Real" (hardware) sectors protection */
-#	define CFG_FLASH_USE_BUFFER_WRITE
-#ifdef CFG_NOR1SZ
-#	define CFG_MAX_FLASH_BANKS	2	/* max number of memory banks */
-#	define CFG_FLASH_SIZE		((CFG_NOR1SZ + CFG_BOOTSZ) << 20)
-#	define CFG_FLASH_BANKS_LIST	{ CFG_CS0_BASE, CFG_CS1_BASE }
+#	define CONFIG_SYS_FLASH_CFI_WIDTH	FLASH_CFI_16BIT
+#	define CONFIG_SYS_MAX_FLASH_SECT	137	/* max number of sectors on one chip */
+#	define CONFIG_SYS_FLASH_PROTECTION	/* "Real" (hardware) sectors protection */
+#	define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
+#ifdef CONFIG_SYS_NOR1SZ
+#	define CONFIG_SYS_MAX_FLASH_BANKS	2	/* max number of memory banks */
+#	define CONFIG_SYS_FLASH_SIZE		((CONFIG_SYS_NOR1SZ + CONFIG_SYS_BOOTSZ) << 20)
+#	define CONFIG_SYS_FLASH_BANKS_LIST	{ CONFIG_SYS_CS0_BASE, CONFIG_SYS_CS1_BASE }
 #else
-#	define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks */
-#	define CFG_FLASH_SIZE		(CFG_BOOTSZ << 20)
+#	define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks */
+#	define CONFIG_SYS_FLASH_SIZE		(CONFIG_SYS_BOOTSZ << 20)
 #endif
 #endif
 
 /* Configuration for environment
  * Environment is embedded in u-boot in the second sector of the flash
  */
-#define CFG_ENV_OFFSET		0x2000
-#define CFG_ENV_SECT_SIZE	0x2000
-#define CFG_ENV_IS_IN_FLASH	1
-#define CFG_ENV_IS_EMBEDDED	1
+#define CONFIG_ENV_OFFSET		0x2000
+#define CONFIG_ENV_SECT_SIZE	0x2000
+#define CONFIG_ENV_IS_IN_FLASH	1
+#define CONFIG_ENV_IS_EMBEDDED	1
 
 /*-----------------------------------------------------------------------
  * Cache Configuration
  */
-#define CFG_CACHELINE_SIZE	16
+#define CONFIG_SYS_CACHELINE_SIZE	16
 
 /*-----------------------------------------------------------------------
  * Chipselect bank definitions
@@ -284,14 +284,14 @@
  * CS4 - Available
  * CS5 - Available
  */
-#define CFG_CS0_BASE		0xFF800000
-#define CFG_CS0_MASK		(((CFG_BOOTSZ << 20) - 1) & 0xFFFF0001)
-#define CFG_CS0_CTRL		0x00101980
-
-#ifdef CFG_NOR1SZ
-#define CFG_CS1_BASE		0xE0000000
-#define CFG_CS1_MASK		(((CFG_NOR1SZ << 20) - 1) & 0xFFFF0001)
-#define CFG_CS1_CTRL		0x00101D80
+#define CONFIG_SYS_CS0_BASE		0xFF800000
+#define CONFIG_SYS_CS0_MASK		(((CONFIG_SYS_BOOTSZ << 20) - 1) & 0xFFFF0001)
+#define CONFIG_SYS_CS0_CTRL		0x00101980
+
+#ifdef CONFIG_SYS_NOR1SZ
+#define CONFIG_SYS_CS1_BASE		0xE0000000
+#define CONFIG_SYS_CS1_MASK		(((CONFIG_SYS_NOR1SZ << 20) - 1) & 0xFFFF0001)
+#define CONFIG_SYS_CS1_CTRL		0x00101D80
 #endif
 
 #endif				/* _M5485EVB_H */
diff --git a/include/configs/MBX.h b/include/configs/MBX.h
index d9f2addb5..5f7c7a8e4 100644
--- a/include/configs/MBX.h
+++ b/include/configs/MBX.h
@@ -67,7 +67,7 @@
 				"nfsaddrs=10.0.0.99:10.0.0.2"
 
 #define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
-#undef	CFG_LOADS_BAUD_CHANGE   /* don't allow baudrate change	*/
+#undef	CONFIG_SYS_LOADS_BAUD_CHANGE   /* don't allow baudrate change	*/
 
 #undef	CONFIG_WATCHDOG			/* watchdog disabled		*/
 
@@ -96,29 +96,29 @@
 /*
  * Miscellaneous configurable options
  */
-#define CFG_LONGHELP			/* undef to save memory		*/
-#define CFG_PROMPT	"=> "		/* Monitor Command Prompt	*/
-#undef	CFG_HUSH_PARSER			/* Hush parse for U-Boot	*/
-#ifdef	CFG_HUSH_PARSER
-#define CFG_PROMPT_HUSH_PS2	"> "
+#define CONFIG_SYS_LONGHELP			/* undef to save memory		*/
+#define CONFIG_SYS_PROMPT	"=> "		/* Monitor Command Prompt	*/
+#undef	CONFIG_SYS_HUSH_PARSER			/* Hush parse for U-Boot	*/
+#ifdef	CONFIG_SYS_HUSH_PARSER
+#define CONFIG_SYS_PROMPT_HUSH_PS2	"> "
 #endif
 #if defined(CONFIG_CMD_KGDB)
-#define CFG_CBSIZE	1024		/* Console I/O Buffer Size	*/
+#define CONFIG_SYS_CBSIZE	1024		/* Console I/O Buffer Size	*/
 #else
-#define CFG_CBSIZE	256		/* Console I/O Buffer Size	*/
+#define CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size	*/
 #endif
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define CFG_MAXARGS	16		/* max number of command args	*/
-#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS	16		/* max number of command args	*/
+#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
 
-#define CFG_MEMTEST_START	0x0400000	/* memtest works on	*/
-#define CFG_MEMTEST_END		0x0C00000	/* 4 ... 12 MB in DRAM	*/
+#define CONFIG_SYS_MEMTEST_START	0x0400000	/* memtest works on	*/
+#define CONFIG_SYS_MEMTEST_END		0x0C00000	/* 4 ... 12 MB in DRAM	*/
 
-#define CFG_LOAD_ADDR		0x100000	/* default load address */
+#define CONFIG_SYS_LOAD_ADDR		0x100000	/* default load address */
 
-#define CFG_HZ		1000		/* decrementer freq: 1 ms ticks */
+#define CONFIG_SYS_HZ		1000		/* decrementer freq: 1 ms ticks */
 
-#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
 
 /*
  * Low Level Configuration Settings
@@ -129,62 +129,62 @@
 /*-----------------------------------------------------------------------
  * Physical memory map as defined by the MBX PGM
  */
-#define CFG_IMMR		0xFA200000 /* Internal Memory Mapped Register*/
-#define CFG_NVRAM_BASE		0xFA000000 /* NVRAM			     */
-#define CFG_NVRAM_OR		0xffe00000 /* w/o speed dependent flags!!    */
-#define CFG_CSR_BASE		0xFA100000 /* Control/Status Registers	     */
-#define CFG_PCIMEM_BASE		0x80000000 /* PCI I/O and Memory Spaces	     */
-#define CFG_PCIMEM_OR		0xA0000108
-#define CFG_PCIBRIDGE_BASE	0xFA210000 /* PCI-Bus Bridge Registers	     */
-#define CFG_PCIBRIDGE_OR	0xFFFF0108
+#define CONFIG_SYS_IMMR		0xFA200000 /* Internal Memory Mapped Register*/
+#define CONFIG_SYS_NVRAM_BASE		0xFA000000 /* NVRAM			     */
+#define CONFIG_SYS_NVRAM_OR		0xffe00000 /* w/o speed dependent flags!!    */
+#define CONFIG_SYS_CSR_BASE		0xFA100000 /* Control/Status Registers	     */
+#define CONFIG_SYS_PCIMEM_BASE		0x80000000 /* PCI I/O and Memory Spaces	     */
+#define CONFIG_SYS_PCIMEM_OR		0xA0000108
+#define CONFIG_SYS_PCIBRIDGE_BASE	0xFA210000 /* PCI-Bus Bridge Registers	     */
+#define CONFIG_SYS_PCIBRIDGE_OR	0xFFFF0108
 
 /*-----------------------------------------------------------------------
  * Definitions for initial stack pointer and data area (in DPRAM)
  */
-#define CFG_INIT_RAM_ADDR	CFG_IMMR
-#define CFG_INIT_RAM_END	0x2f00	/* End of used area in DPRAM	*/
-#define CFG_GBL_DATA_SIZE	64  /* size in bytes reserved for initial data */
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_VPD_SIZE	256 /* size in bytes reserved for vpd buffer */
-#define CFG_INIT_VPD_OFFSET	(CFG_GBL_DATA_OFFSET - CFG_INIT_VPD_SIZE)
-#define CFG_INIT_SP_OFFSET	(CFG_INIT_VPD_OFFSET-8)
+#define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_IMMR
+#define CONFIG_SYS_INIT_RAM_END	0x2f00	/* End of used area in DPRAM	*/
+#define CONFIG_SYS_GBL_DATA_SIZE	64  /* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_VPD_SIZE	256 /* size in bytes reserved for vpd buffer */
+#define CONFIG_SYS_INIT_VPD_OFFSET	(CONFIG_SYS_GBL_DATA_OFFSET - CONFIG_SYS_INIT_VPD_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET	(CONFIG_SYS_INIT_VPD_OFFSET-8)
 
 /*-----------------------------------------------------------------------
  * Offset in DPMEM where we keep the VPD data
  */
-#define CFG_DPRAMVPD		(CFG_INIT_VPD_OFFSET - 0x2000)
+#define CONFIG_SYS_DPRAMVPD		(CONFIG_SYS_INIT_VPD_OFFSET - 0x2000)
 
 /*-----------------------------------------------------------------------
  * Start addresses for the final memory configuration
  * (Set up by the startup code)
- * Please note that CFG_SDRAM_BASE _must_ start at 0
+ * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
  */
-#define CFG_SDRAM_BASE		0x00000000
-#define CFG_FLASH_BASE		0xfe000000
+#define CONFIG_SYS_SDRAM_BASE		0x00000000
+#define CONFIG_SYS_FLASH_BASE		0xfe000000
 #ifdef	DEBUG
-#define CFG_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor	*/
+#define CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor	*/
 #else
-#define CFG_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor	*/
+#define CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor	*/
 #endif
-#undef	CFG_MONITOR_BASE	/* 0x200000	   to run U-Boot from RAM */
-#define CFG_MONITOR_BASE	CFG_FLASH_BASE
-#define CFG_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/
+#undef	CONFIG_SYS_MONITOR_BASE	/* 0x200000	   to run U-Boot from RAM */
+#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_FLASH_BASE
+#define CONFIG_SYS_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/
 
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
+#define CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
 
 /*-----------------------------------------------------------------------
  * FLASH organization
  */
-#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
-#define CFG_MAX_FLASH_SECT	16	/* max number of sectors on one chip	*/
+#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
+#define CONFIG_SYS_MAX_FLASH_SECT	16	/* max number of sectors on one chip	*/
 
-#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
-#define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
+#define CONFIG_SYS_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
+#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
 
 /*-----------------------------------------------------------------------
  * NVRAM Configuration
@@ -193,16 +193,16 @@
  * board: EPPC-Bug from Motorola. To avoid collisions in NVRAM Usage, we
  * access the NVRAM at the offset 0x1000.
  */
-#define CFG_ENV_IS_IN_NVRAM	1	/* turn on NVRAM env feature */
-#define CFG_ENV_ADDR		(CFG_NVRAM_BASE + 0x1000)
-#define CFG_ENV_SIZE		0x1000
+#define CONFIG_ENV_IS_IN_NVRAM	1	/* turn on NVRAM env feature */
+#define CONFIG_ENV_ADDR		(CONFIG_SYS_NVRAM_BASE + 0x1000)
+#define CONFIG_ENV_SIZE		0x1000
 
 /*-----------------------------------------------------------------------
  * Cache Configuration
  */
-#define CFG_CACHELINE_SIZE	16	/* For all MPC8xx CPUs			*/
+#define CONFIG_SYS_CACHELINE_SIZE	16	/* For all MPC8xx CPUs			*/
 #if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT	4	/* log base 2 of the above value	*/
+#define CONFIG_SYS_CACHELINE_SHIFT	4	/* log base 2 of the above value	*/
 #endif
 
 /*-----------------------------------------------------------------------
@@ -212,10 +212,10 @@
  * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze
  */
 #if defined(CONFIG_WATCHDOG)
-#define CFG_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
+#define CONFIG_SYS_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
 			 SYPCR_SWE  | SYPCR_SWRI| SYPCR_SWP)
 #else
-#define CFG_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF)
+#define CONFIG_SYS_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF)
 #endif
 
 /*-----------------------------------------------------------------------
@@ -223,22 +223,22 @@
  *-----------------------------------------------------------------------
  * PCMCIA config., multi-function pin tri-state
  */
-/* #define CFG_SIUMCR	(SIUMCR_DBGC11 | SIUMCR_DPC | SIUMCR_MLRC10 | SIUMCR_SEME) */
-#define CFG_SIUMCR	(SIUMCR_DBGC11 | SIUMCR_DPC | SIUMCR_MLRC11 | SIUMCR_SEME | SIUMCR_BSC )
+/* #define CONFIG_SYS_SIUMCR	(SIUMCR_DBGC11 | SIUMCR_DPC | SIUMCR_MLRC10 | SIUMCR_SEME) */
+#define CONFIG_SYS_SIUMCR	(SIUMCR_DBGC11 | SIUMCR_DPC | SIUMCR_MLRC11 | SIUMCR_SEME | SIUMCR_BSC )
 
 /*-----------------------------------------------------------------------
  * TBSCR - Time Base Status and Control				11-26
  *-----------------------------------------------------------------------
  * Clear Reference Interrupt Status, Timebase freezing enabled
  */
-#define CFG_TBSCR	(TBSCR_REFA | TBSCR_REFB | TBSCR_TBF)
+#define CONFIG_SYS_TBSCR	(TBSCR_REFA | TBSCR_REFB | TBSCR_TBF)
 
 /*-----------------------------------------------------------------------
  * PISCR - Periodic Interrupt Status and Control		11-31
  *-----------------------------------------------------------------------
  * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
  */
-#define CFG_PISCR	(PISCR_PS | PISCR_PITF | PISCR_PTE)
+#define CONFIG_SYS_PISCR	(PISCR_PS | PISCR_PITF | PISCR_PTE)
 
 /*-----------------------------------------------------------------------
  * PLPRCR - PLL, Low-Power, and Reset Control Register		15-30
@@ -246,7 +246,7 @@
  * Reset PLL lock status sticky bit, timer expired status bit and timer
  * interrupt status bit - leave PLL multiplication factor unchanged !
  */
-#define CFG_PLPRCR	(PLPRCR_SPLSS | PLPRCR_TEXPS | PLPRCR_TMIST)
+#define CONFIG_SYS_PLPRCR	(PLPRCR_SPLSS | PLPRCR_TEXPS | PLPRCR_TMIST)
 
 /*-----------------------------------------------------------------------
  * SCCR - System Clock and reset Control Register		15-27
@@ -255,23 +255,23 @@
  * power management and some other internal clocks
  */
 #define SCCR_MASK	(SCCR_RTDIV | SCCR_RTSEL)
-#define CFG_SCCR	SCCR_TBS
+#define CONFIG_SYS_SCCR	SCCR_TBS
 
 /*-----------------------------------------------------------------------
  * PCMCIA stuff
  *-----------------------------------------------------------------------
  *
  */
-#define CFG_PCMCIA_MEM_ADDR	(0xE0000000)
-#define CFG_PCMCIA_MEM_SIZE	( 64 << 20 )
-#define CFG_PCMCIA_DMA_ADDR	(0xE4000000)
-#define CFG_PCMCIA_DMA_SIZE	( 64 << 20 )
-#define CFG_PCMCIA_ATTRB_ADDR	(0xE8000000)
-#define CFG_PCMCIA_ATTRB_SIZE	( 64 << 20 )
-#define CFG_PCMCIA_IO_ADDR	(0xEC000000)
-#define CFG_PCMCIA_IO_SIZE	( 64 << 20 )
+#define CONFIG_SYS_PCMCIA_MEM_ADDR	(0xE0000000)
+#define CONFIG_SYS_PCMCIA_MEM_SIZE	( 64 << 20 )
+#define CONFIG_SYS_PCMCIA_DMA_ADDR	(0xE4000000)
+#define CONFIG_SYS_PCMCIA_DMA_SIZE	( 64 << 20 )
+#define CONFIG_SYS_PCMCIA_ATTRB_ADDR	(0xE8000000)
+#define CONFIG_SYS_PCMCIA_ATTRB_SIZE	( 64 << 20 )
+#define CONFIG_SYS_PCMCIA_IO_ADDR	(0xEC000000)
+#define CONFIG_SYS_PCMCIA_IO_SIZE	( 64 << 20 )
 
-#define CFG_PCMCIA_INTERRUPT	SIU_LEVEL6
+#define CONFIG_SYS_PCMCIA_INTERRUPT	SIU_LEVEL6
 
 #define CONFIG_PCMCIA_SLOT_A	1
 
@@ -287,28 +287,28 @@
 #undef	CONFIG_IDE_LED			/* LED	 for ide not supported	*/
 #undef	CONFIG_IDE_RESET		/* reset for ide not supported	*/
 
-#define CFG_IDE_MAXBUS		1	/* max. 1 IDE bus		*/
-#define CFG_IDE_MAXDEVICE	1	/* max. 1 drive per IDE bus	*/
+#define CONFIG_SYS_IDE_MAXBUS		1	/* max. 1 IDE bus		*/
+#define CONFIG_SYS_IDE_MAXDEVICE	1	/* max. 1 drive per IDE bus	*/
 
-#define CFG_ATA_IDE0_OFFSET	0x0000
+#define CONFIG_SYS_ATA_IDE0_OFFSET	0x0000
 
-#define CFG_ATA_BASE_ADDR	CFG_PCMCIA_MEM_ADDR
+#define CONFIG_SYS_ATA_BASE_ADDR	CONFIG_SYS_PCMCIA_MEM_ADDR
 
 /* Offset for data I/O */
-#define CFG_ATA_DATA_OFFSET	(CFG_PCMCIA_MEM_SIZE + 0x320)
+#define CONFIG_SYS_ATA_DATA_OFFSET	(CONFIG_SYS_PCMCIA_MEM_SIZE + 0x320)
 
 /* Offset for normal register accesses */
-#define CFG_ATA_REG_OFFSET	(2 * CFG_PCMCIA_MEM_SIZE + 0x320)
+#define CONFIG_SYS_ATA_REG_OFFSET	(2 * CONFIG_SYS_PCMCIA_MEM_SIZE + 0x320)
 
 /* Offset for alternate registers */
-#define CFG_ATA_ALT_OFFSET	0x0100
+#define CONFIG_SYS_ATA_ALT_OFFSET	0x0100
 
 /*-----------------------------------------------------------------------
  * Debug Entry Mode
  *-----------------------------------------------------------------------
  *
  */
-#define CFG_DER 0
+#define CONFIG_SYS_DER 0
 
 /*
  * Internal Definitions
diff --git a/include/configs/MBX860T.h b/include/configs/MBX860T.h
index 3b88507de..4cb3a696c 100644
--- a/include/configs/MBX860T.h
+++ b/include/configs/MBX860T.h
@@ -56,21 +56,21 @@
 /*
  * Miscellaneous configurable options
  */
-#undef	CFG_LONGHELP			/* undef to save memory		*/
-#define	CFG_PROMPT		":>"		/* Monitor Command Prompt	*/
-#define	CFG_CBSIZE		256		/* Console I/O Buffer Size	*/
-#define	CFG_PBSIZE		(CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define	CFG_MAXARGS	16		/* max number of command args	*/
-#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+#undef	CONFIG_SYS_LONGHELP			/* undef to save memory		*/
+#define	CONFIG_SYS_PROMPT		":>"		/* Monitor Command Prompt	*/
+#define	CONFIG_SYS_CBSIZE		256		/* Console I/O Buffer Size	*/
+#define	CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define	CONFIG_SYS_MAXARGS	16		/* max number of command args	*/
+#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
 
-#define CFG_MEMTEST_START	0x0400000	/* memtest works on	*/
-#define CFG_MEMTEST_END		0x0800000	/* 4 ... 8 MB in DRAM	*/
+#define CONFIG_SYS_MEMTEST_START	0x0400000	/* memtest works on	*/
+#define CONFIG_SYS_MEMTEST_END		0x0800000	/* 4 ... 8 MB in DRAM	*/
 
-#define	CFG_LOAD_ADDR		0x100000	/* default load address	*/
+#define	CONFIG_SYS_LOAD_ADDR		0x100000	/* default load address	*/
 
-#define	CFG_HZ		1000		/* decrementer freq: 1 ms ticks	*/
+#define	CONFIG_SYS_HZ		1000		/* decrementer freq: 1 ms ticks	*/
 
-#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
 
 /*
  * Low Level Configuration Settings
@@ -80,61 +80,61 @@
 /*-----------------------------------------------------------------------
  * Internal Memory Mapped Register
  */
-#define CFG_IMMR			0xFFA00000
-#define CFG_IMMR_SIZE		((uint)(64 * 1024))
-#define CFG_NVRAM_BASE		0xFA000000 /* NVRAM                          */
-#define CFG_NVRAM_OR		0xffe00000 /* w/o speed dependent flags!!    */
-#define CFG_CSR_BASE		0xFA100000 /* Control/Status Registers       */
-#define CFG_PCIMEM_BASE		0x80000000 /* PCI I/O and Memory Spaces      */
-#define CFG_PCIMEM_OR		0xA0000108
-#define CFG_PCIBRIDGE_BASE	0xFA210000 /* PCI-Bus Bridge Registers       */
-#define CFG_PCIBRIDGE_OR	0xFFFF0108
+#define CONFIG_SYS_IMMR			0xFFA00000
+#define CONFIG_SYS_IMMR_SIZE		((uint)(64 * 1024))
+#define CONFIG_SYS_NVRAM_BASE		0xFA000000 /* NVRAM                          */
+#define CONFIG_SYS_NVRAM_OR		0xffe00000 /* w/o speed dependent flags!!    */
+#define CONFIG_SYS_CSR_BASE		0xFA100000 /* Control/Status Registers       */
+#define CONFIG_SYS_PCIMEM_BASE		0x80000000 /* PCI I/O and Memory Spaces      */
+#define CONFIG_SYS_PCIMEM_OR		0xA0000108
+#define CONFIG_SYS_PCIBRIDGE_BASE	0xFA210000 /* PCI-Bus Bridge Registers       */
+#define CONFIG_SYS_PCIBRIDGE_OR	0xFFFF0108
 
 /*-----------------------------------------------------------------------
  * Definitions for initial stack pointer and data area (in DPRAM)
  */
-#define CFG_INIT_RAM_ADDR	CFG_IMMR
-#define	CFG_INIT_RAM_END	0x2f00	/* End of used area in DPRAM	*/
-#define	CFG_GBL_DATA_SIZE	64  /* size in bytes reserved for initial data */
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define	CFG_INIT_VPD_SIZE	256 /* size in bytes reserved for vpd buffer */
-#define CFG_INIT_VPD_OFFSET	(CFG_GBL_DATA_OFFSET - CFG_INIT_VPD_SIZE)
-#define	CFG_INIT_SP_OFFSET	(CFG_INIT_VPD_OFFSET-8)
+#define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_IMMR
+#define	CONFIG_SYS_INIT_RAM_END	0x2f00	/* End of used area in DPRAM	*/
+#define	CONFIG_SYS_GBL_DATA_SIZE	64  /* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define	CONFIG_SYS_INIT_VPD_SIZE	256 /* size in bytes reserved for vpd buffer */
+#define CONFIG_SYS_INIT_VPD_OFFSET	(CONFIG_SYS_GBL_DATA_OFFSET - CONFIG_SYS_INIT_VPD_SIZE)
+#define	CONFIG_SYS_INIT_SP_OFFSET	(CONFIG_SYS_INIT_VPD_OFFSET-8)
 
 /*-----------------------------------------------------------------------
  * Offset in DPMEM where we keep the VPD data
  */
-#define CFG_DPRAMVPD		(CFG_INIT_VPD_OFFSET - 0x2000)
+#define CONFIG_SYS_DPRAMVPD		(CONFIG_SYS_INIT_VPD_OFFSET - 0x2000)
 
 /*-----------------------------------------------------------------------
  * Start addresses for the final memory configuration
  * (Set up by the startup code)
- * Please note that CFG_SDRAM_BASE _must_ start at 0
+ * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
  */
-#define	CFG_SDRAM_BASE		0x00000000
-#define CFG_FLASH_BASE		0x00000000
+#define	CONFIG_SYS_SDRAM_BASE		0x00000000
+#define CONFIG_SYS_FLASH_BASE		0x00000000
 /*0xFE000000*/
-#define CFG_FLASH_SIZE		((uint)(8 * 1024 * 1024))	/* max 8Mbyte */
-#define CFG_MONITOR_BASE	CFG_FLASH_BASE
-#define	CFG_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor	*/
-#define CFG_HWINFO_ADDR		(CFG_FLASH_BASE + CFG_MONITOR_LEN - CFG_HWINFO_LEN)
-#define	CFG_MALLOC_LEN		(256 << 10)	/* Reserve 256 kB for malloc()	*/
+#define CONFIG_SYS_FLASH_SIZE		((uint)(8 * 1024 * 1024))	/* max 8Mbyte */
+#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_FLASH_BASE
+#define	CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor	*/
+#define CONFIG_SYS_HWINFO_ADDR		(CONFIG_SYS_FLASH_BASE + CONFIG_SYS_MONITOR_LEN - CONFIG_SYS_HWINFO_LEN)
+#define	CONFIG_SYS_MALLOC_LEN		(256 << 10)	/* Reserve 256 kB for malloc()	*/
 
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define	CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux	*/
+#define	CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux	*/
 
 /*-----------------------------------------------------------------------
  * FLASH organization
  */
-#define CFG_MAX_FLASH_BANKS	4	/* max number of memory banks		*/
-#define CFG_MAX_FLASH_SECT	16	/* max number of sectors on one chip	*/
+#define CONFIG_SYS_MAX_FLASH_BANKS	4	/* max number of memory banks		*/
+#define CONFIG_SYS_MAX_FLASH_SECT	16	/* max number of sectors on one chip	*/
 
-#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
-#define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
+#define CONFIG_SYS_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
+#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
 
 /*-----------------------------------------------------------------------
  * NVRAM Configuration
@@ -143,16 +143,16 @@
  * board: EPPC-Bug from Motorola. To avoid collisions in NVRAM Usage, we
  * access the NVRAM at the offset 0x1000.
  */
-#define CFG_ENV_IS_IN_NVRAM	1	/* turn on NVRAM env feature */
-#define CFG_ENV_ADDR		(CFG_NVRAM_BASE + 0x1000)
-#define CFG_ENV_SIZE		0x1000
+#define CONFIG_ENV_IS_IN_NVRAM	1	/* turn on NVRAM env feature */
+#define CONFIG_ENV_ADDR		(CONFIG_SYS_NVRAM_BASE + 0x1000)
+#define CONFIG_ENV_SIZE		0x1000
 
 /*-----------------------------------------------------------------------
  * Cache Configuration
  */
-#define CFG_CACHELINE_SIZE	16	/* For all MPC8xx CPUs			*/
+#define CONFIG_SYS_CACHELINE_SIZE	16	/* For all MPC8xx CPUs			*/
 #if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT	4	/* log base 2 of the above value	*/
+#define CONFIG_SYS_CACHELINE_SHIFT	4	/* log base 2 of the above value	*/
 #endif
 
 /*-----------------------------------------------------------------------
@@ -162,10 +162,10 @@
  * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze
  */
 #if defined(CONFIG_WATCHDOG)
-#define CFG_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
+#define CONFIG_SYS_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
 			 SYPCR_SWE  | SYPCR_SWRI| SYPCR_SWP)
 #else
-#define CFG_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF)
+#define CONFIG_SYS_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF)
 #endif
 
 /*-----------------------------------------------------------------------
@@ -173,21 +173,21 @@
  *-----------------------------------------------------------------------
  * PCMCIA config., multi-function pin tri-state
  */
-#define CFG_SIUMCR	(SIUMCR_DBGC11 | SIUMCR_DPC | SIUMCR_MLRC10 | SIUMCR_SEME)
+#define CONFIG_SYS_SIUMCR	(SIUMCR_DBGC11 | SIUMCR_DPC | SIUMCR_MLRC10 | SIUMCR_SEME)
 
 /*-----------------------------------------------------------------------
  * TBSCR - Time Base Status and Control				11-26
  *-----------------------------------------------------------------------
  * Clear Reference Interrupt Status, Timebase freezing enabled
  */
-#define CFG_TBSCR	(TBSCR_REFA | TBSCR_REFB | TBSCR_TBF)
+#define CONFIG_SYS_TBSCR	(TBSCR_REFA | TBSCR_REFB | TBSCR_TBF)
 
 /*-----------------------------------------------------------------------
  * PISCR - Periodic Interrupt Status and Control		11-31
  *-----------------------------------------------------------------------
  * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
  */
-#define CFG_PISCR	(PISCR_PS | PISCR_PITF | PISCR_PTE)
+#define CONFIG_SYS_PISCR	(PISCR_PS | PISCR_PITF | PISCR_PTE)
 
 /*-----------------------------------------------------------------------
  * PLPRCR - PLL, Low-Power, and Reset Control Register		15-30
@@ -195,7 +195,7 @@
  * Reset PLL lock status sticky bit, timer expired status bit and timer
  * interrupt status bit - leave PLL multiplication factor unchanged !
  */
-#define CFG_PLPRCR	(PLPRCR_SPLSS | PLPRCR_TEXPS | PLPRCR_TMIST)
+#define CONFIG_SYS_PLPRCR	(PLPRCR_SPLSS | PLPRCR_TEXPS | PLPRCR_TMIST)
 
 /*-----------------------------------------------------------------------
  * SCCR - System Clock and reset Control Register		15-27
@@ -204,14 +204,14 @@
  * power management and some other internal clocks
  */
 #define SCCR_MASK	(SCCR_RTDIV | SCCR_RTSEL)
-#define CFG_SCCR	SCCR_TBS
+#define CONFIG_SYS_SCCR	SCCR_TBS
 
  /*-----------------------------------------------------------------------
  *
  *-----------------------------------------------------------------------
  *
  */
-#define CFG_DER		0
+#define CONFIG_SYS_DER		0
 
 /* Because of the way the 860 starts up and assigns CS0 the
 * entire address space, we have to set the memory controller
@@ -235,20 +235,20 @@
 #define FLASH_BASE0_PRELIM	0xFE000000	/* FLASH bank #0	*/
 #define FLASH_BASE1_PRELIM	0xFF010000	/* FLASH bank #0	*/
 
-#define CFG_REMAP_OR_AM		0x80000000	/* OR addr mask */
-#define CFG_PRELIM_OR_AM	0xFFF00000	/* OR addr mask */
+#define CONFIG_SYS_REMAP_OR_AM		0x80000000	/* OR addr mask */
+#define CONFIG_SYS_PRELIM_OR_AM	0xFFF00000	/* OR addr mask */
 
 /* FLASH timing: ACS = 10, TRLX = 1, CSNT = 1, SCY = 3, EHTR = 0	*/
-#define CFG_OR_TIMING_FLASH	(OR_CSNT_SAM  | OR_ACS_DIV4 | OR_BI | OR_SCY_3_CLK | OR_TRLX)
+#define CONFIG_SYS_OR_TIMING_FLASH	(OR_CSNT_SAM  | OR_ACS_DIV4 | OR_BI | OR_SCY_3_CLK | OR_TRLX)
 
-#define CFG_OR0_REMAP	(CFG_REMAP_OR_AM  | CFG_OR_TIMING_FLASH)
-#define CFG_OR0_PRELIM	(0xFF800000 | OR_CSNT_SAM | OR_BI | OR_SCY_3_CLK)   /* 1 Mbyte until detected and only 1 Mbyte is needed*/
-#define CFG_BR0_PRELIM	(0xFE000000 | BR_V )
+#define CONFIG_SYS_OR0_REMAP	(CONFIG_SYS_REMAP_OR_AM  | CONFIG_SYS_OR_TIMING_FLASH)
+#define CONFIG_SYS_OR0_PRELIM	(0xFF800000 | OR_CSNT_SAM | OR_BI | OR_SCY_3_CLK)   /* 1 Mbyte until detected and only 1 Mbyte is needed*/
+#define CONFIG_SYS_BR0_PRELIM	(0xFE000000 | BR_V )
 
 /* BCSRx - Board Control and Status Registers */
-#define CFG_OR1_REMAP	CFG_OR0_REMAP
-#define CFG_OR1_PRELIM	0xFFC00000 | OR_ACS_DIV4
-#define CFG_BR1_PRELIM	(0x00000000 | BR_MS_UPMA | BR_V )
+#define CONFIG_SYS_OR1_REMAP	CONFIG_SYS_OR0_REMAP
+#define CONFIG_SYS_OR1_PRELIM	0xFFC00000 | OR_ACS_DIV4
+#define CONFIG_SYS_BR1_PRELIM	(0x00000000 | BR_MS_UPMA | BR_V )
 
 
 /*
@@ -256,30 +256,30 @@
  */
 
 /* periodic timer for refresh */
-#define CFG_MAMR_PTA		97		/* start with divider for 100 MHz	*/
+#define CONFIG_SYS_MAMR_PTA		97		/* start with divider for 100 MHz	*/
 
 /* refresh rate 15.6 us (= 64 ms / 4K = 62.4 / quad bursts) for <= 128 MBit	*/
-#define CFG_MPTPR_2BK_4K	MPTPR_PTP_DIV16		/* setting for 2 banks	*/
-#define CFG_MPTPR_1BK_4K	MPTPR_PTP_DIV32		/* setting for 1 bank	*/
+#define CONFIG_SYS_MPTPR_2BK_4K	MPTPR_PTP_DIV16		/* setting for 2 banks	*/
+#define CONFIG_SYS_MPTPR_1BK_4K	MPTPR_PTP_DIV32		/* setting for 1 bank	*/
 
 /* refresh rate 7.8 us (= 64 ms / 8K = 31.2 / quad bursts) for 256 MBit		*/
-#define CFG_MPTPR_2BK_8K	MPTPR_PTP_DIV8		/* setting for 2 banks	*/
-#define CFG_MPTPR_1BK_8K	MPTPR_PTP_DIV16		/* setting for 1 bank	*/
+#define CONFIG_SYS_MPTPR_2BK_8K	MPTPR_PTP_DIV8		/* setting for 2 banks	*/
+#define CONFIG_SYS_MPTPR_1BK_8K	MPTPR_PTP_DIV16		/* setting for 1 bank	*/
 
 /*
  * MAMR settings for SDRAM
  */
 
 /* 8 column SDRAM */
-#define CFG_MAMR_8COL	((CFG_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
+#define CONFIG_SYS_MAMR_8COL	((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
 			 MAMR_AMA_TYPE_0 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A11 |	\
 			 MAMR_RLFA_1X	 | MAMR_WLFA_1X	   | MAMR_TLFA_4X)
 /* 9 column SDRAM */
-#define CFG_MAMR_9COL	((CFG_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
+#define CONFIG_SYS_MAMR_9COL	((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
 			 MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 |	\
 			 MAMR_RLFA_1X	 | MAMR_WLFA_1X	   | MAMR_TLFA_4X)
 
-#define CFG_MAMR		0x13821000
+#define CONFIG_SYS_MAMR		0x13821000
 /*
  * Internal Definitions
  *
diff --git a/include/configs/METROBOX.h b/include/configs/METROBOX.h
index d61b49eee..518173aa5 100644
--- a/include/configs/METROBOX.h
+++ b/include/configs/METROBOX.h
@@ -109,7 +109,7 @@
 #define CONFIG_BOARD_EARLY_INIT_F 1	     /* Call board_pre_init	*/
 #define CONFIG_MISC_INIT_F	  1	     /* Call board misc_init_f	*/
 #define CONFIG_MISC_INIT_R	  1	     /* Call board misc_init_r	*/
-#undef	CFG_DRAM_TEST			     /* Disable-takes long time!*/
+#undef	CONFIG_SYS_DRAM_TEST			     /* Disable-takes long time!*/
 #define CONFIG_SYS_CLK_FREQ	  66666666   /* external freq to pll	*/
 
 #define CONFIG_VERY_BIG_RAM 1
@@ -121,34 +121,34 @@
  * Base addresses -- Note these are effective addresses where the
  * actual resources get mapped (not physical addresses)
  *----------------------------------------------------------------------*/
-#define CFG_SDRAM_BASE	       0x00000000    /* _must_ be 0		*/
-#define CFG_FLASH_BASE	       0xfff80000    /* start of FLASH		*/
-#define CFG_MONITOR_BASE       0xfff80000    /* start of monitor	*/
-#define CFG_PCI_MEMBASE	       0x80000000    /* mapped pci memory	*/
-#define CFG_PERIPHERAL_BASE    0xe0000000    /* internal peripherals	*/
-#define CFG_ISRAM_BASE	       0xc0000000    /* internal SRAM		*/
-#define CFG_PCI_BASE	       0xd0000000    /* internal PCI regs	*/
-
-#define CFG_NVRAM_BASE_ADDR   (CFG_PERIPHERAL_BASE + 0x08000000)
-#define CFG_FPGA_BASE	      (CFG_PERIPHERAL_BASE + 0x08200000)
-#define CFG_BME32_BASE	      (CFG_PERIPHERAL_BASE + 0x08500000)
-#define CFG_GPIO_BASE	      (CFG_PERIPHERAL_BASE + 0x00000700)
+#define CONFIG_SYS_SDRAM_BASE	       0x00000000    /* _must_ be 0		*/
+#define CONFIG_SYS_FLASH_BASE	       0xfff80000    /* start of FLASH		*/
+#define CONFIG_SYS_MONITOR_BASE       0xfff80000    /* start of monitor	*/
+#define CONFIG_SYS_PCI_MEMBASE	       0x80000000    /* mapped pci memory	*/
+#define CONFIG_SYS_PERIPHERAL_BASE    0xe0000000    /* internal peripherals	*/
+#define CONFIG_SYS_ISRAM_BASE	       0xc0000000    /* internal SRAM		*/
+#define CONFIG_SYS_PCI_BASE	       0xd0000000    /* internal PCI regs	*/
+
+#define CONFIG_SYS_NVRAM_BASE_ADDR   (CONFIG_SYS_PERIPHERAL_BASE + 0x08000000)
+#define CONFIG_SYS_FPGA_BASE	      (CONFIG_SYS_PERIPHERAL_BASE + 0x08200000)
+#define CONFIG_SYS_BME32_BASE	      (CONFIG_SYS_PERIPHERAL_BASE + 0x08500000)
+#define CONFIG_SYS_GPIO_BASE	      (CONFIG_SYS_PERIPHERAL_BASE + 0x00000700)
 
 /*-----------------------------------------------------------------------
  * Initial RAM & stack pointer (placed in internal SRAM)
  *----------------------------------------------------------------------*/
-#define CFG_TEMP_STACK_OCM    1
-#define CFG_OCM_DATA_ADDR     CFG_ISRAM_BASE
-#define CFG_INIT_RAM_ADDR     CFG_ISRAM_BASE /* Initial RAM address	*/
-#define CFG_INIT_RAM_END      0x2000	     /* End of used area in RAM */
-#define CFG_GBL_DATA_SIZE     128	     /* num bytes initial data	*/
+#define CONFIG_SYS_TEMP_STACK_OCM    1
+#define CONFIG_SYS_OCM_DATA_ADDR     CONFIG_SYS_ISRAM_BASE
+#define CONFIG_SYS_INIT_RAM_ADDR     CONFIG_SYS_ISRAM_BASE /* Initial RAM address	*/
+#define CONFIG_SYS_INIT_RAM_END      0x2000	     /* End of used area in RAM */
+#define CONFIG_SYS_GBL_DATA_SIZE     128	     /* num bytes initial data	*/
 
-#define CFG_GBL_DATA_OFFSET   (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_POST_WORD_ADDR    (CFG_GBL_DATA_OFFSET - 0x4)
-#define CFG_INIT_SP_OFFSET    CFG_POST_WORD_ADDR
+#define CONFIG_SYS_GBL_DATA_OFFSET   (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_POST_WORD_ADDR    (CONFIG_SYS_GBL_DATA_OFFSET - 0x4)
+#define CONFIG_SYS_INIT_SP_OFFSET    CONFIG_SYS_POST_WORD_ADDR
 
-#define CFG_MONITOR_LEN	      (256 * 1024)   /* Rsrv 256kB for Mon	*/
-#define CFG_MALLOC_LEN	      (128 * 1024)   /* Rsrv 128kB for malloc	*/
+#define CONFIG_SYS_MONITOR_LEN	      (256 * 1024)   /* Rsrv 256kB for Mon	*/
+#define CONFIG_SYS_MALLOC_LEN	      (128 * 1024)   /* Rsrv 128kB for malloc	*/
 
 /*-----------------------------------------------------------------------
  * Serial Port
@@ -157,7 +157,7 @@
 #define CONFIG_SERIAL_MULTI   1
 #define CONFIG_BAUDRATE	      9600
 
-#define CFG_BAUDRATE_TABLE  \
+#define CONFIG_SYS_BAUDRATE_TABLE  \
     {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
 
 /*-----------------------------------------------------------------------
@@ -167,21 +167,21 @@
  * The DS1743 code assumes this condition (i.e. -- it assumes the base
  * address for the RTC registers is:
  *
- *	CFG_NVRAM_BASE_ADDR + CFG_NVRAM_SIZE
+ *	CONFIG_SYS_NVRAM_BASE_ADDR + CONFIG_SYS_NVRAM_SIZE
  *
  *----------------------------------------------------------------------*/
-#define CFG_NVRAM_SIZE	      (0x2000 - 8)   /* NVRAM size(8k)- RTC regs*/
+#define CONFIG_SYS_NVRAM_SIZE	      (0x2000 - 8)   /* NVRAM size(8k)- RTC regs*/
 #define CONFIG_RTC_DS174x     1		     /* DS1743 RTC		*/
 
 /*-----------------------------------------------------------------------
  * FLASH related
  *----------------------------------------------------------------------*/
-#define CFG_MAX_FLASH_BANKS   1		     /* number of banks		*/
-#define CFG_MAX_FLASH_SECT    8		     /* sectors per device	*/
+#define CONFIG_SYS_MAX_FLASH_BANKS   1		     /* number of banks		*/
+#define CONFIG_SYS_MAX_FLASH_SECT    8		     /* sectors per device	*/
 
-#undef	CFG_FLASH_CHECKSUM
-#define CFG_FLASH_ERASE_TOUT  120000	     /* Flash Erase TO (in ms)	 */
-#define CFG_FLASH_WRITE_TOUT  500	     /* Flash Write TO(in ms)	 */
+#undef	CONFIG_SYS_FLASH_CHECKSUM
+#define CONFIG_SYS_FLASH_ERASE_TOUT  120000	     /* Flash Erase TO (in ms)	 */
+#define CONFIG_SYS_FLASH_WRITE_TOUT  500	     /* Flash Write TO(in ms)	 */
 
 /*-----------------------------------------------------------------------
  * DDR SDRAM
@@ -194,33 +194,34 @@
  *----------------------------------------------------------------------*/
 #define CONFIG_HARD_I2C	      1		     /* I2C hardware support	*/
 #undef	CONFIG_SOFT_I2C			     /* I2C !bit-banged		*/
-#define CFG_I2C_SPEED	      400000	     /* I2C speed 400kHz	*/
-#define CFG_I2C_SLAVE	      0x7F	     /* I2C slave address	*/
-#define CFG_I2C_NOPROBES      {0x69}	     /* Don't probe these addrs */
+#define CONFIG_SYS_I2C_SPEED	      400000	     /* I2C speed 400kHz	*/
+#define CONFIG_SYS_I2C_SLAVE	      0x7F	     /* I2C slave address	*/
+#define CONFIG_SYS_I2C_NOPROBES      {0x69}	     /* Don't probe these addrs */
 #define CONFIG_I2C_BUS1	      1		     /* Include i2c bus 1 supp	*/
 
 
 /*-----------------------------------------------------------------------
  * Environment
  *----------------------------------------------------------------------*/
-#define CFG_ENV_IS_IN_NVRAM   1		     /* Environment uses NVRAM	*/
-#undef	CFG_ENV_IS_IN_FLASH		     /* ... not in flash	*/
-#undef	CFG_ENV_IS_IN_EEPROM		     /* ... not in EEPROM	*/
+#define CONFIG_ENV_IS_IN_NVRAM   1		     /* Environment uses NVRAM	*/
+#undef	CONFIG_ENV_IS_IN_FLASH		     /* ... not in flash	*/
+#undef	CONFIG_ENV_IS_IN_EEPROM		     /* ... not in EEPROM	*/
 #define CONFIG_ENV_OVERWRITE  1		     /* allow env overwrite	*/
 
-#define CFG_ENV_SIZE	      0x1000	     /* Size of Env vars	*/
-#define CFG_ENV_ADDR	      (CFG_NVRAM_BASE_ADDR)
+#define CONFIG_ENV_SIZE	      0x1000	     /* Size of Env vars	*/
+#define CONFIG_ENV_ADDR	      (CONFIG_SYS_NVRAM_BASE_ADDR)
 
 #define CONFIG_BOOTARGS	      "console=ttyS0,9600 root=/dev/nfs rw nfsroot=$serverip:/home/metrobox0 nfsaddrs=$ipaddr:::::eth0:none "
 #define CONFIG_BOOTCOMMAND    "tftp 8000000 pImage.metrobox;bootm 8000000"
 #define CONFIG_BOOTDELAY      5		    /* disable autoboot */
 
 #define CONFIG_LOADS_ECHO     1		     /* echo on for serial dnld */
-#define CFG_LOADS_BAUD_CHANGE 1		     /* allow baudrate change	*/
+#define CONFIG_SYS_LOADS_BAUD_CHANGE 1		     /* allow baudrate change	*/
 
 /*-----------------------------------------------------------------------
  * Networking
  *----------------------------------------------------------------------*/
+#define CONFIG_PPC4xx_EMAC
 #define CONFIG_MII	      1		     /* MII PHY management	*/
 #define CONFIG_NET_MULTI      1
 #define CONFIG_PHY_ADDR	      0xff	     /* no phy on EMAC0		*/
@@ -239,7 +240,7 @@
 #define CONFIG_NETMASK	      255.255.0.0
 #define CONFIG_ETHADDR	      00:00:00:00:00:00 /* No EMAC 0 support	*/
 #define CONFIG_ETH1ADDR	      00:00:00:00:00:00 /* No EMAC 1 support	*/
-#define CFG_RX_ETH_BUFFER     32	     /* #eth rx buff & descrs	*/
+#define CONFIG_SYS_RX_ETH_BUFFER     32	     /* #eth rx buff & descrs	*/
 
 
 /*
@@ -277,33 +278,33 @@
 /* Include auto complete with tabs */
 #define CONFIG_AUTO_COMPLETE 1
 #define CONFIG_AUTO_COMPLETE 1
-#define CFG_ALT_MEMTEST	     1	     /* use real memory test	 */
+#define CONFIG_SYS_ALT_MEMTEST	     1	     /* use real memory test	 */
 
-#define CFG_LONGHELP			     /* undef to save memory	*/
-#define CFG_PROMPT	      "MetroBox=> "  /* Monitor Command Prompt	*/
+#define CONFIG_SYS_LONGHELP			     /* undef to save memory	*/
+#define CONFIG_SYS_PROMPT	      "MetroBox=> "  /* Monitor Command Prompt	*/
 
-#define CFG_HUSH_PARSER	       1	     /* HUSH for ext'd cli	*/
-#define CFG_PROMPT_HUSH_PS2    "> "
+#define CONFIG_SYS_HUSH_PARSER	       1	     /* HUSH for ext'd cli	*/
+#define CONFIG_SYS_PROMPT_HUSH_PS2    "> "
 
 
 /*-----------------------------------------------------------------------
  * Console Buffer
  *----------------------------------------------------------------------*/
 #if defined(CONFIG_CMD_KGDB)
-#define CFG_CBSIZE	      1024	     /* Console I/O Buffer Size */
+#define CONFIG_SYS_CBSIZE	      1024	     /* Console I/O Buffer Size */
 #else
-#define CFG_CBSIZE	      256	     /* Console I/O Buffer Size */
+#define CONFIG_SYS_CBSIZE	      256	     /* Console I/O Buffer Size */
 #endif
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16)
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
 					     /* Print Buffer Size	*/
-#define CFG_MAXARGS	      16	     /* max number of cmd args	*/
-#define CFG_BARGSIZE	      CFG_CBSIZE     /* Boot Arg Buffer Size	*/
+#define CONFIG_SYS_MAXARGS	      16	     /* max number of cmd args	*/
+#define CONFIG_SYS_BARGSIZE	      CONFIG_SYS_CBSIZE     /* Boot Arg Buffer Size	*/
 
 /*-----------------------------------------------------------------------
  * Memory Test
  *----------------------------------------------------------------------*/
-#define CFG_MEMTEST_START     0x0400000	     /* memtest works on	*/
-#define CFG_MEMTEST_END	      0x0C00000	     /* 4 ... 12 MB in DRAM	*/
+#define CONFIG_SYS_MEMTEST_START     0x0400000	     /* memtest works on	*/
+#define CONFIG_SYS_MEMTEST_END	      0x0C00000	     /* 4 ... 12 MB in DRAM	*/
 
 /*-----------------------------------------------------------------------
  * Compact Flash (in true IDE mode)
@@ -312,16 +313,16 @@
 #undef	CONFIG_IDE_LED			/* no led for ide supported	*/
 
 #define CONFIG_IDE_RESET		/* reset for ide supported	*/
-#define CFG_IDE_MAXBUS		1	/* max. 1 IDE busses	*/
-#define CFG_IDE_MAXDEVICE	(CFG_IDE_MAXBUS*1) /* max. 1 drives per IDE bus */
+#define CONFIG_SYS_IDE_MAXBUS		1	/* max. 1 IDE busses	*/
+#define CONFIG_SYS_IDE_MAXDEVICE	(CONFIG_SYS_IDE_MAXBUS*1) /* max. 1 drives per IDE bus */
 
-#define CFG_ATA_BASE_ADDR	0xF0000000
-#define CFG_ATA_IDE0_OFFSET	0x0000
-#define CFG_ATA_DATA_OFFSET	0x0000	 /* Offset for data I/O */
-#define CFG_ATA_REG_OFFSET	0x0000	 /* Offset for normal register accesses*/
-#define CFG_ATA_ALT_OFFSET	0x100000 /* Offset for alternate registers */
+#define CONFIG_SYS_ATA_BASE_ADDR	0xF0000000
+#define CONFIG_SYS_ATA_IDE0_OFFSET	0x0000
+#define CONFIG_SYS_ATA_DATA_OFFSET	0x0000	 /* Offset for data I/O */
+#define CONFIG_SYS_ATA_REG_OFFSET	0x0000	 /* Offset for normal register accesses*/
+#define CONFIG_SYS_ATA_ALT_OFFSET	0x100000 /* Offset for alternate registers */
 
-#define CFG_ATA_STRIDE		2	 /* Directly connected CF, needs a stride
+#define CONFIG_SYS_ATA_STRIDE		2	 /* Directly connected CF, needs a stride
 					    to get to the correct offset */
 #define CONFIG_DOS_PARTITION  1		     /* Include dos partition	*/
 
@@ -332,20 +333,20 @@
 #define CONFIG_PCI			     /* include pci support	*/
 #define CONFIG_PCI_PNP			     /* do pci plug-and-play	*/
 #define CONFIG_PCI_SCAN_SHOW		     /* show pci devices	*/
-#define CFG_PCI_TARGBASE      (CFG_PCI_MEMBASE)
+#define CONFIG_SYS_PCI_TARGBASE      (CONFIG_SYS_PCI_MEMBASE)
 
 /* Board-specific PCI */
-#define CFG_PCI_TARGET_INIT		     /* let board init pci target*/
+#define CONFIG_SYS_PCI_TARGET_INIT		     /* let board init pci target*/
 
-#define CFG_PCI_SUBSYS_VENDORID 0x17BA	     /* Sandburst */
-#define CFG_PCI_SUBSYS_DEVICEID 0xcafe	     /* Whatever */
+#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x17BA	     /* Sandburst */
+#define CONFIG_SYS_PCI_SUBSYS_DEVICEID 0xcafe	     /* Whatever */
 
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define CFG_BOOTMAPSZ		(8 << 20) /* Initial Memory map for Linux */
+#define CONFIG_SYS_BOOTMAPSZ		(8 << 20) /* Initial Memory map for Linux */
 
 /*
  * Internal Definitions
@@ -364,10 +365,10 @@
  * Miscellaneous configurable options
  *----------------------------------------------------------------------*/
 #undef CONFIG_WATCHDOG			     /* watchdog disabled	*/
-#define CFG_LOAD_ADDR	      0x8000000	     /* default load address	*/
-#define CFG_EXTBDINFO	      1		     /* use extended board_info */
+#define CONFIG_SYS_LOAD_ADDR	      0x8000000	     /* default load address	*/
+#define CONFIG_SYS_EXTBDINFO	      1		     /* use extended board_info */
 
-#define CFG_HZ		      100	     /* decr freq: 1 ms ticks	*/
+#define CONFIG_SYS_HZ		      100	     /* decr freq: 1 ms ticks	*/
 
 
 #endif	/* __CONFIG_H */
diff --git a/include/configs/MHPC.h b/include/configs/MHPC.h
index dde774271..8e7f9cdc1 100644
--- a/include/configs/MHPC.h
+++ b/include/configs/MHPC.h
@@ -63,7 +63,7 @@
 	"bootm"
 
 #define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
-#undef	CFG_LOADS_BAUD_CHANGE		/* don't allow baudrate change	*/
+#undef	CONFIG_SYS_LOADS_BAUD_CHANGE		/* don't allow baudrate change	*/
 
 #undef	CONFIG_WATCHDOG			/* watchdog disabled		*/
 #define CONFIG_RTC_MPC8xx		/* use internal RTC of MPC8xx	*/
@@ -89,14 +89,14 @@
 			else	immr->im_cpm.cp_pbdat &= ~PB_SCL
 #define I2C_DELAY	udelay(5)	/* 1/4 I2C clock duration */
 
-#define CFG_I2C_SPEED			50000
-#define CFG_I2C_SLAVE			0xFE
-#define CFG_I2C_EEPROM_ADDR		0x50	/* EEPROM X24C04		*/
-#define CFG_I2C_EEPROM_ADDR_LEN		1	/* bytes of address		*/
+#define CONFIG_SYS_I2C_SPEED			50000
+#define CONFIG_SYS_I2C_SLAVE			0xFE
+#define CONFIG_SYS_I2C_EEPROM_ADDR		0x50	/* EEPROM X24C04		*/
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN		1	/* bytes of address		*/
 /* mask of address bits that overflow into the "EEPROM chip address"	*/
-#define CFG_I2C_EEPROM_ADDR_OVERFLOW	0x07
-#define CFG_EEPROM_PAGE_WRITE_BITS	3
-#define CFG_EEPROM_PAGE_WRITE_DELAY_MS	10
+#define CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW	0x07
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS	3
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	10
 
 #define LCD_VIDEO_ADDR		(SDRAM_MAX_SIZE-SDRAM_RES_SIZE)
 #define LCD_VIDEO_SIZE		SDRAM_RES_SIZE	/* 2MB */
@@ -142,25 +142,25 @@
 /*
  * Miscellaneous configurable options
  */
-#define CFG_LONGHELP			/* undef to save memory		*/
-#define CFG_PROMPT	"=> "		/* Monitor Command Prompt	*/
+#define CONFIG_SYS_LONGHELP			/* undef to save memory		*/
+#define CONFIG_SYS_PROMPT	"=> "		/* Monitor Command Prompt	*/
 #if defined(CONFIG_CMD_KGDB)
-#define CFG_CBSIZE	1024		/* Console I/O Buffer Size	*/
+#define CONFIG_SYS_CBSIZE	1024		/* Console I/O Buffer Size	*/
 #else
-#define CFG_CBSIZE	256		/* Console I/O Buffer Size	*/
+#define CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size	*/
 #endif
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define CFG_MAXARGS	16		/* max number of command args	*/
-#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS	16		/* max number of command args	*/
+#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
 
-#define CFG_MEMTEST_START	0x0400000	/* memtest works on	*/
-#define CFG_MEMTEST_END		0x0C00000	/* 4 ... 12 MB in DRAM	*/
+#define CONFIG_SYS_MEMTEST_START	0x0400000	/* memtest works on	*/
+#define CONFIG_SYS_MEMTEST_END		0x0C00000	/* 4 ... 12 MB in DRAM	*/
 
-#define CFG_LOAD_ADDR		0x300000	/* default load address */
+#define CONFIG_SYS_LOAD_ADDR		0x300000	/* default load address */
 
-#define CFG_HZ			1000		/* decrementer freq: 1 ms ticks */
+#define CONFIG_SYS_HZ			1000		/* decrementer freq: 1 ms ticks */
 
-#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
 
 /*
  * Low Level Configuration Settings
@@ -171,29 +171,29 @@
 /*-----------------------------------------------------------------------
  * Physical memory map
  */
-#define CFG_IMMR		0xFFF00000 /* Internal Memory Mapped Register*/
+#define CONFIG_SYS_IMMR		0xFFF00000 /* Internal Memory Mapped Register*/
 
 /*-----------------------------------------------------------------------
  * Definitions for initial stack pointer and data area (in DPRAM)
  */
-#define CFG_INIT_RAM_ADDR	CFG_IMMR
-#define CFG_INIT_RAM_END	0x2F00	/* End of used area in DPRAM	*/
-#define CFG_GBL_DATA_SIZE	64  /* size in bytes reserved for initial data */
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_IMMR
+#define CONFIG_SYS_INIT_RAM_END	0x2F00	/* End of used area in DPRAM	*/
+#define CONFIG_SYS_GBL_DATA_SIZE	64  /* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
 /*-----------------------------------------------------------------------
  * Start addresses for the final memory configuration
  * (Set up by the startup code)
- * Please note that CFG_SDRAM_BASE _must_ start at 0
+ * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
  */
-#define CFG_SDRAM_BASE		0x00000000
-#define CFG_FLASH_BASE		0xfe000000
+#define CONFIG_SYS_SDRAM_BASE		0x00000000
+#define CONFIG_SYS_FLASH_BASE		0xfe000000
 
-#define CFG_MONITOR_LEN		0x40000		/* Reserve 256 kB for Monitor	*/
-#undef	CFG_MONITOR_BASE		    /* to run U-Boot from RAM */
-#define CFG_MONITOR_BASE	CFG_FLASH_BASE
-#define CFG_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/
+#define CONFIG_SYS_MONITOR_LEN		0x40000		/* Reserve 256 kB for Monitor	*/
+#undef	CONFIG_SYS_MONITOR_BASE		    /* to run U-Boot from RAM */
+#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_FLASH_BASE
+#define CONFIG_SYS_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/
 
 /*
  * JFFS2 partitions
@@ -218,26 +218,26 @@
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map- for Linux	*/
+#define CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map- for Linux	*/
 
 /*-----------------------------------------------------------------------
  * FLASH organization
  */
-#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
-#define CFG_MAX_FLASH_SECT	64	/* max number of sectors on one chip	*/
+#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
+#define CONFIG_SYS_MAX_FLASH_SECT	64	/* max number of sectors on one chip	*/
 
-#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
-#define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
-#define CFG_ENV_IS_IN_FLASH	1
-#define CFG_ENV_OFFSET		CFG_MONITOR_LEN /* Offset of Environment */
-#define CFG_ENV_SIZE		0x20000 /* Total Size of Environment	*/
+#define CONFIG_SYS_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
+#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
+#define CONFIG_ENV_IS_IN_FLASH	1
+#define CONFIG_ENV_OFFSET		CONFIG_SYS_MONITOR_LEN /* Offset of Environment */
+#define CONFIG_ENV_SIZE		0x20000 /* Total Size of Environment	*/
 
 /*-----------------------------------------------------------------------
  * Cache Configuration
  */
-#define CFG_CACHELINE_SIZE	16	/* For all MPC8xx CPUs			*/
+#define CONFIG_SYS_CACHELINE_SIZE	16	/* For all MPC8xx CPUs			*/
 #if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT	4	/* log base 2 of the above value	*/
+#define CONFIG_SYS_CACHELINE_SHIFT	4	/* log base 2 of the above value	*/
 #endif
 
 /*-----------------------------------------------------------------------
@@ -247,10 +247,10 @@
  * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze
  */
 #if defined(CONFIG_WATCHDOG)
-#define CFG_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
+#define CONFIG_SYS_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
 			 SYPCR_SWE  | SYPCR_SWRI| SYPCR_SWP)
 #else
-#define CFG_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
+#define CONFIG_SYS_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
 			 SYPCR_SWP)
 #endif
 
@@ -259,27 +259,27 @@
  *-----------------------------------------------------------------------
  * PCMCIA config., multi-function pin tri-state
  */
-#define CFG_SIUMCR	(SIUMCR_SEME)
+#define CONFIG_SYS_SIUMCR	(SIUMCR_SEME)
 
 /*-----------------------------------------------------------------------
  * TBSCR - Time Base Status and Control				11-26
  *-----------------------------------------------------------------------
  * Clear Reference Interrupt Status, Timebase freezing enabled
  */
-#define CFG_TBSCR	(TBSCR_REFA | TBSCR_REFB | TBSCR_TBE)
+#define CONFIG_SYS_TBSCR	(TBSCR_REFA | TBSCR_REFB | TBSCR_TBE)
 
 /*-----------------------------------------------------------------------
  * PISCR - Periodic Interrupt Status and Control		11-31
  *-----------------------------------------------------------------------
  * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
  */
-#define CFG_PISCR	(PISCR_PS | PISCR_PITF | PISCR_PTE)
+#define CONFIG_SYS_PISCR	(PISCR_PS | PISCR_PITF | PISCR_PTE)
 
 /*-----------------------------------------------------------------------
  * RTCSC - Real-Time Clock Status and Control Register		12-18
  *-----------------------------------------------------------------------
  */
-#define CFG_RTCSC	(RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE)
+#define CONFIG_SYS_RTCSC	(RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE)
 
 /*-----------------------------------------------------------------------
  * PLPRCR - PLL, Low-Power, and Reset Control Register		15-30
@@ -290,7 +290,7 @@
 #define MPC8XX_SPEED	50000000L
 #define MPC8XX_XIN	5000000L      /* ref clk */
 #define MPC8XX_FACT	(MPC8XX_SPEED/MPC8XX_XIN)
-#define CFG_PLPRCR	(((MPC8XX_FACT-1) << PLPRCR_MF_SHIFT) | \
+#define CONFIG_SYS_PLPRCR	(((MPC8XX_FACT-1) << PLPRCR_MF_SHIFT) | \
 			PLPRCR_SPLSS | PLPRCR_TEXPS | PLPRCR_TMIST)
 
 /*-----------------------------------------------------------------------
@@ -301,7 +301,7 @@
  */
 
 #define SCCR_MASK	(SCCR_RTDIV | SCCR_RTSEL)     /* SCCR_EBDF11 */
-#define CFG_SCCR	(SCCR_TBS | SCCR_DFLCD001)
+#define CONFIG_SYS_SCCR	(SCCR_TBS | SCCR_DFLCD001)
 
 
 /*-----------------------------------------------------------------------
@@ -310,8 +310,8 @@
  *-----------------------------------------------------------------------
  * periodic timer for refresh
  */
-#define CFG_MAMR_PTA	0xC0
-#define CFG_MAMR	((CFG_MAMR_PTA << MAMR_PTA_SHIFT) | MAMR_PTAE | MAMR_G0CLA_A11 | MAMR_TLFA_MSK)
+#define CONFIG_SYS_MAMR_PTA	0xC0
+#define CONFIG_SYS_MAMR	((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT) | MAMR_PTAE | MAMR_G0CLA_A11 | MAMR_TLFA_MSK)
 
 /*
  * BR0 and OR0 (FLASH) used to re-map FLASH
@@ -320,14 +320,14 @@
 /* allow for max 8 MB of Flash */
 #define FLASH_BASE		0xFE000000	/* FLASH bank #0*/
 #define FLASH_BASE0_PRELIM	0xFE000000	/* FLASH bank #0*/
-#define CFG_REMAP_OR_AM		0xFF800000	/* OR addr mask */
-#define CFG_PRELIM_OR_AM	0xFF800000	/* OR addr mask */
+#define CONFIG_SYS_REMAP_OR_AM		0xFF800000	/* OR addr mask */
+#define CONFIG_SYS_PRELIM_OR_AM	0xFF800000	/* OR addr mask */
 
-#define CFG_OR_TIMING_FLASH	(OR_CSNT_SAM | OR_BI | OR_SCY_8_CLK) /* (OR_CSNT_SAM | OR_ACS_DIV2 | OR_BI | OR_SCY_6_CLK)*/
+#define CONFIG_SYS_OR_TIMING_FLASH	(OR_CSNT_SAM | OR_BI | OR_SCY_8_CLK) /* (OR_CSNT_SAM | OR_ACS_DIV2 | OR_BI | OR_SCY_6_CLK)*/
 
-#define CFG_OR0_REMAP	(CFG_REMAP_OR_AM  | CFG_OR_TIMING_FLASH)
-#define CFG_OR0_PRELIM	(CFG_PRELIM_OR_AM | CFG_OR_TIMING_FLASH)
-#define CFG_BR0_PRELIM	((FLASH_BASE & BR_BA_MSK) | BR_PS_16 | BR_MS_GPCM | BR_V )
+#define CONFIG_SYS_OR0_REMAP	(CONFIG_SYS_REMAP_OR_AM  | CONFIG_SYS_OR_TIMING_FLASH)
+#define CONFIG_SYS_OR0_PRELIM	(CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_FLASH)
+#define CONFIG_SYS_BR0_PRELIM	((FLASH_BASE & BR_BA_MSK) | BR_PS_16 | BR_MS_GPCM | BR_V )
 
 /*
  * BR1 and OR1 (SDRAM)
@@ -337,46 +337,46 @@
 #define SDRAM_RES_SIZE		0x00200000	/* 2 MB for framebuffer */
 
 /* SDRAM timing: drive GPL5 high on first cycle */
-#define CFG_OR_TIMING_SDRAM	(OR_G5LS)
+#define CONFIG_SYS_OR_TIMING_SDRAM	(OR_G5LS)
 
-#define CFG_OR1_PRELIM	((~(SDRAM_MAX_SIZE)+1)| CFG_OR_TIMING_SDRAM )
-#define CFG_BR1_PRELIM	((SDRAM_BASE1_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
+#define CONFIG_SYS_OR1_PRELIM	((~(SDRAM_MAX_SIZE)+1)| CONFIG_SYS_OR_TIMING_SDRAM )
+#define CONFIG_SYS_BR1_PRELIM	((SDRAM_BASE1_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
 
 /*
  * BR2/OR2 - DIMM
  */
-#define CFG_OR2		(OR_ACS_DIV4)
-#define CFG_BR2		(BR_MS_UPMA)
+#define CONFIG_SYS_OR2		(OR_ACS_DIV4)
+#define CONFIG_SYS_BR2		(BR_MS_UPMA)
 
 /*
  * BR3/OR3 - DIMM
  */
-#define CFG_OR3		(OR_ACS_DIV4)
-#define CFG_BR3		(BR_MS_UPMA)
+#define CONFIG_SYS_OR3		(OR_ACS_DIV4)
+#define CONFIG_SYS_BR3		(BR_MS_UPMA)
 
 /*
  * BR4/OR4
  */
-#define CFG_OR4		0
-#define CFG_BR4		0
+#define CONFIG_SYS_OR4		0
+#define CONFIG_SYS_BR4		0
 
 /*
  * BR5/OR5
  */
-#define CFG_OR5		0
-#define CFG_BR5		0
+#define CONFIG_SYS_OR5		0
+#define CONFIG_SYS_BR5		0
 
 /*
  * BR6/OR6
  */
-#define CFG_OR6		0
-#define CFG_BR6		0
+#define CONFIG_SYS_OR6		0
+#define CONFIG_SYS_BR6		0
 
 /*
  * BR7/OR7
  */
-#define CFG_OR7		0
-#define CFG_BR7		0
+#define CONFIG_SYS_OR7		0
+#define CONFIG_SYS_BR7		0
 
 
 /*-----------------------------------------------------------------------
@@ -384,7 +384,7 @@
  *-----------------------------------------------------------------------
  *
  */
-#define CFG_DER 0
+#define CONFIG_SYS_DER 0
 
 /*
  * Internal Definitions
diff --git a/include/configs/MIP405.h b/include/configs/MIP405.h
index 66235e37b..c58ce053f 100644
--- a/include/configs/MIP405.h
+++ b/include/configs/MIP405.h
@@ -90,8 +90,8 @@
 
 #define CONFIG_NAND_LEGACY
 
-#define	 CFG_HUSH_PARSER
-#define	 CFG_PROMPT_HUSH_PS2 "> "
+#define	 CONFIG_SYS_HUSH_PARSER
+#define	 CONFIG_SYS_PROMPT_HUSH_PS2 "> "
 /**************************************************************
  * I2C Stuff:
  * the MIP405 is equiped with an Atmel 24C128/256 EEPROM at address
@@ -100,23 +100,22 @@
  ***************************************************************/
 
 #define CONFIG_HARD_I2C			/* I2c with hardware support */
-#define CFG_I2C_SPEED		50000	/* I2C speed and slave address */
-#define CFG_I2C_SLAVE		0x7F
+#define CONFIG_SYS_I2C_SPEED		50000	/* I2C speed and slave address */
+#define CONFIG_SYS_I2C_SLAVE		0x7F
 
-#define CFG_I2C_EEPROM_ADDR	0x53	/* EEPROM 24C128/256		*/
-#define CFG_I2C_EEPROM_ADDR_LEN	2	/* Bytes of address		*/
+#define CONFIG_SYS_I2C_EEPROM_ADDR	0x53	/* EEPROM 24C128/256		*/
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN	2	/* Bytes of address		*/
 /* mask of address bits that overflow into the "EEPROM chip address"    */
-#undef CFG_I2C_EEPROM_ADDR_OVERFLOW
-#define CFG_EEPROM_PAGE_WRITE_BITS 6	/* The Atmel 24C128/256 has	*/
+#undef CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 6	/* The Atmel 24C128/256 has	*/
 					/* 64 byte page write mode using*/
 					/* last	6 bits of the address	*/
-#define CFG_EEPROM_PAGE_WRITE_ENABLE	/* enable Page write */
-#define CFG_EEPROM_PAGE_WRITE_DELAY_MS	10	/* and takes up to 10 msec */
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	10	/* and takes up to 10 msec */
 
 
-#define CFG_ENV_IS_IN_EEPROM	1	/* use EEPROM for environment vars */
-#define CFG_ENV_OFFSET		0x00000	/* environment starts at the beginning of the EEPROM */
-#define CFG_ENV_SIZE		0x00800	/* 2k bytes may be used for env vars */
+#define CONFIG_ENV_IS_IN_EEPROM	1	/* use EEPROM for environment vars */
+#define CONFIG_ENV_OFFSET		0x00000	/* environment starts at the beginning of the EEPROM */
+#define CONFIG_ENV_SIZE		0x00800	/* 2k bytes may be used for env vars */
 
 /***************************************************************
  * Definitions for Serial Presence Detect EEPROM address
@@ -143,54 +142,54 @@
 /***************************************************************
  * defines if the console is stored in the environment
  ***************************************************************/
-#define CFG_CONSOLE_IS_IN_ENV	/* stdin, stdout and stderr are in evironment */
+#define CONFIG_SYS_CONSOLE_IS_IN_ENV	/* stdin, stdout and stderr are in evironment */
 /***************************************************************
  * defines if an overwrite_console function exists
  *************************************************************/
-#define CFG_CONSOLE_OVERWRITE_ROUTINE
-#define CFG_CONSOLE_INFO_QUIET
+#define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
+#define CONFIG_SYS_CONSOLE_INFO_QUIET
 /***************************************************************
  * defines if the overwrite_console should be stored in the
  * environment
  **************************************************************/
-#undef CFG_CONSOLE_ENV_OVERWRITE
+#undef CONFIG_SYS_CONSOLE_ENV_OVERWRITE
 
 /**************************************************************
  * loads config
  *************************************************************/
 #define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
-#define CFG_LOADS_BAUD_CHANGE	1	/* allow baudrate change	*/
+#define CONFIG_SYS_LOADS_BAUD_CHANGE	1	/* allow baudrate change	*/
 
 #define CONFIG_MISC_INIT_R
 /***********************************************************
  * Miscellaneous configurable options
  **********************************************************/
-#define CFG_LONGHELP			/* undef to save memory		*/
-#define CFG_PROMPT	"=> "		/* Monitor Command Prompt	*/
+#define CONFIG_SYS_LONGHELP			/* undef to save memory		*/
+#define CONFIG_SYS_PROMPT	"=> "		/* Monitor Command Prompt	*/
 #if defined(CONFIG_CMD_KGDB)
-#define CFG_CBSIZE	1024		/* Console I/O Buffer Size	*/
+#define CONFIG_SYS_CBSIZE	1024		/* Console I/O Buffer Size	*/
 #else
-#define CFG_CBSIZE	256		/* Console I/O Buffer Size	*/
+#define CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size	*/
 #endif
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define CFG_MAXARGS	16		/* max number of command args	*/
-#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS	16		/* max number of command args	*/
+#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
 
-#define CFG_MEMTEST_START	0x0100000	/* memtest works on	*/
-#define CFG_MEMTEST_END		0x0C00000	/* 1 ... 12 MB in DRAM	*/
+#define CONFIG_SYS_MEMTEST_START	0x0100000	/* memtest works on	*/
+#define CONFIG_SYS_MEMTEST_END		0x0C00000	/* 1 ... 12 MB in DRAM	*/
 
-#undef	CFG_EXT_SERIAL_CLOCK	       /* no external serial clock used */
-#define CFG_BASE_BAUD       916667
+#undef	CONFIG_SYS_EXT_SERIAL_CLOCK	       /* no external serial clock used */
+#define CONFIG_SYS_BASE_BAUD       916667
 
 /* The following table includes the supported baudrates */
-#define CFG_BAUDRATE_TABLE	\
+#define CONFIG_SYS_BAUDRATE_TABLE	\
 	{ 300, 600, 1200, 2400, 4800, 9600, 19200, 38400,     \
 	 57600, 115200, 230400, 460800, 921600 }
 
-#define CFG_LOAD_ADDR	0x400000	/* default load address */
-#define CFG_EXTBDINFO	1		/* To use extended board_into (bd_t) */
+#define CONFIG_SYS_LOAD_ADDR	0x400000	/* default load address */
+#define CONFIG_SYS_EXTBDINFO	1		/* To use extended board_into (bd_t) */
 
-#define CFG_HZ		1000		/* decrementer freq: 1 ms ticks */
+#define CONFIG_SYS_HZ		1000		/* decrementer freq: 1 ms ticks */
 
 /*-----------------------------------------------------------------------
  * PCI stuff
@@ -204,40 +203,40 @@
 #define CONFIG_PCI_HOST PCI_HOST_FORCE	/* configure as pci-host	*/
 #define CONFIG_PCI_PNP			/* pci plug-and-play		*/
 					/* resource configuration	*/
-#define CFG_PCI_SUBSYS_VENDORID 0x0000	/* PCI Vendor ID: to-do!!!	*/
-#define CFG_PCI_SUBSYS_DEVICEID 0x0000	/* PCI Device ID: to-do!!!	*/
-#define CFG_PCI_PTM1LA	0x00000000	/* point to sdram		*/
-#define CFG_PCI_PTM1MS	0x80000001	/* 2GB, enable hard-wired to 1	*/
-#define CFG_PCI_PTM1PCI 0x00000000      /* Host: use this pci address   */
-#define CFG_PCI_PTM2LA	0x00000000	/* disabled			*/
-#define CFG_PCI_PTM2MS	0x00000000	/* disabled			*/
-#define CFG_PCI_PTM2PCI 0x00000000      /* Host: use this pci address   */
+#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x0000	/* PCI Vendor ID: to-do!!!	*/
+#define CONFIG_SYS_PCI_SUBSYS_DEVICEID 0x0000	/* PCI Device ID: to-do!!!	*/
+#define CONFIG_SYS_PCI_PTM1LA	0x00000000	/* point to sdram		*/
+#define CONFIG_SYS_PCI_PTM1MS	0x80000001	/* 2GB, enable hard-wired to 1	*/
+#define CONFIG_SYS_PCI_PTM1PCI 0x00000000      /* Host: use this pci address   */
+#define CONFIG_SYS_PCI_PTM2LA	0x00000000	/* disabled			*/
+#define CONFIG_SYS_PCI_PTM2MS	0x00000000	/* disabled			*/
+#define CONFIG_SYS_PCI_PTM2PCI 0x00000000      /* Host: use this pci address   */
 
 /*-----------------------------------------------------------------------
  * Start addresses for the final memory configuration
  * (Set up by the startup code)
- * Please note that CFG_SDRAM_BASE _must_ start at 0
+ * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
  */
-#define CFG_SDRAM_BASE		0x00000000
-#define CFG_FLASH_BASE		0xFFF80000
-#define CFG_MONITOR_BASE	CFG_FLASH_BASE
-#define CFG_MONITOR_LEN		(512 * 1024)	/* Reserve 512 kB for Monitor	*/
-#define CFG_MALLOC_LEN		(1024 * 1024)	/* Reserve 1024 kB for malloc()	*/
+#define CONFIG_SYS_SDRAM_BASE		0x00000000
+#define CONFIG_SYS_FLASH_BASE		0xFFF80000
+#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_FLASH_BASE
+#define CONFIG_SYS_MONITOR_LEN		(512 * 1024)	/* Reserve 512 kB for Monitor	*/
+#define CONFIG_SYS_MALLOC_LEN		(1024 * 1024)	/* Reserve 1024 kB for malloc()	*/
 
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
+#define CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
 /*-----------------------------------------------------------------------
  * FLASH organization
  */
-#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
-#define CFG_MAX_FLASH_SECT	256	/* max number of sectors on one chip	*/
+#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
+#define CONFIG_SYS_MAX_FLASH_SECT	256	/* max number of sectors on one chip	*/
 
-#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
-#define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
+#define CONFIG_SYS_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
+#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
 
 /*
  * JFFS2 partitions
@@ -270,10 +269,10 @@
  * POST Configuration
  */
 #if 0 /* enable this if POST is desired (is supported but not enabled) */
-#define CONFIG_POST		(CFG_POST_MEMORY	| \
-				 CFG_POST_CPU		| \
-				 CFG_POST_RTC		| \
-				 CFG_POST_I2C)
+#define CONFIG_POST		(CONFIG_SYS_POST_MEMORY	| \
+				 CONFIG_SYS_POST_CPU		| \
+				 CONFIG_SYS_POST_RTC		| \
+				 CONFIG_SYS_POST_I2C)
 
 #endif
 /*
@@ -298,22 +297,22 @@
 /*-----------------------------------------------------------------------
  * Definitions for initial stack pointer and data area (in On Chip SRAM)
  */
-#define CFG_TEMP_STACK_OCM      1
-#define CFG_OCM_DATA_ADDR	0xF0000000
-#define CFG_OCM_DATA_SIZE	0x1000
-#define CFG_INIT_RAM_ADDR	CFG_OCM_DATA_ADDR	/* inside of On Chip SRAM    */
-#define CFG_INIT_RAM_END	CFG_OCM_DATA_SIZE	/* End of On Chip SRAM	       */
-#define CFG_GBL_DATA_SIZE	64		/* size in bytes reserved for initial data */
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define CONFIG_SYS_TEMP_STACK_OCM      1
+#define CONFIG_SYS_OCM_DATA_ADDR	0xF0000000
+#define CONFIG_SYS_OCM_DATA_SIZE	0x1000
+#define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_OCM_DATA_ADDR	/* inside of On Chip SRAM    */
+#define CONFIG_SYS_INIT_RAM_END	CONFIG_SYS_OCM_DATA_SIZE	/* End of On Chip SRAM	       */
+#define CONFIG_SYS_GBL_DATA_SIZE	64		/* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
 /* reserve some memory for POST and BOOT limit info */
-#define CFG_INIT_SP_OFFSET	(CFG_GBL_DATA_OFFSET - 32)
+#define CONFIG_SYS_INIT_SP_OFFSET	(CONFIG_SYS_GBL_DATA_OFFSET - 32)
 
 #ifdef  CONFIG_POST		/* reserve one word for POST Info */
-#define CFG_POST_WORD_ADDR	(CFG_GBL_DATA_OFFSET - 4)
+#define CONFIG_SYS_POST_WORD_ADDR	(CONFIG_SYS_GBL_DATA_OFFSET - 4)
 #endif
 
 #ifdef CONFIG_BOOTCOUNT_LIMIT /* reserve 2 word for bootcount limit */
-#define CFG_BOOTCOUNT_ADDR (CFG_GBL_DATA_OFFSET - 12)
+#define CONFIG_SYS_BOOTCOUNT_ADDR (CONFIG_SYS_GBL_DATA_OFFSET - 12)
 #endif
 
 /*
@@ -328,7 +327,7 @@
 /***********************************************************************
  * External peripheral base address
  ***********************************************************************/
-#define CFG_ISA_IO_BASE_ADDRESS 0xE8000000
+#define CONFIG_SYS_ISA_IO_BASE_ADDRESS 0xE8000000
 
 /***********************************************************************
  * Last Stage Init
@@ -337,6 +336,7 @@
 /************************************************************
  * Ethernet Stuff
  ***********************************************************/
+#define CONFIG_PPC4xx_EMAC
 #define CONFIG_MII		1	/* MII PHY management		*/
 #define CONFIG_PHY_ADDR		1	/* PHY address			*/
 #define CONFIG_PHY_RESET_DELAY	300	/* Intel LXT971A needs this */
@@ -351,19 +351,19 @@
  * IDE/ATA stuff
  ************************************************************/
 #if defined(CONFIG_MIP405T)
-#define CFG_IDE_MAXBUS		1   /* MIP405T has only one IDE bus	*/
+#define CONFIG_SYS_IDE_MAXBUS		1   /* MIP405T has only one IDE bus	*/
 #else
-#define CFG_IDE_MAXBUS		2   /* max. 2 IDE busses	*/
+#define CONFIG_SYS_IDE_MAXBUS		2   /* max. 2 IDE busses	*/
 #endif
 
-#define CFG_IDE_MAXDEVICE	(CFG_IDE_MAXBUS*2) /* max. 2 drives per IDE bus */
+#define CONFIG_SYS_IDE_MAXDEVICE	(CONFIG_SYS_IDE_MAXBUS*2) /* max. 2 drives per IDE bus */
 
-#define CFG_ATA_BASE_ADDR	CFG_ISA_IO_BASE_ADDRESS /* base address */
-#define CFG_ATA_IDE0_OFFSET	0x01F0		/* ide0 offste */
-#define CFG_ATA_IDE1_OFFSET	0x0170		/* ide1 offset */
-#define CFG_ATA_DATA_OFFSET	0		/* data reg offset	*/
-#define CFG_ATA_REG_OFFSET	0		/* reg offset */
-#define CFG_ATA_ALT_OFFSET	0x200		/* alternate register offset */
+#define CONFIG_SYS_ATA_BASE_ADDR	CONFIG_SYS_ISA_IO_BASE_ADDRESS /* base address */
+#define CONFIG_SYS_ATA_IDE0_OFFSET	0x01F0		/* ide0 offste */
+#define CONFIG_SYS_ATA_IDE1_OFFSET	0x0170		/* ide1 offset */
+#define CONFIG_SYS_ATA_DATA_OFFSET	0		/* data reg offset	*/
+#define CONFIG_SYS_ATA_REG_OFFSET	0		/* reg offset */
+#define CONFIG_SYS_ATA_ALT_OFFSET	0x200		/* alternate register offset */
 
 #undef	CONFIG_IDE_8xx_DIRECT      /* no pcmcia interface required */
 #undef	CONFIG_IDE_LED	       /* no led for ide supported     */
@@ -385,10 +385,10 @@
 /************************************************************
  * Disk-On-Chip configuration
  ************************************************************/
-#define CFG_MAX_DOC_DEVICE	1	/* Max number of DOC devices		*/
-#define CFG_DOC_SHORT_TIMEOUT
-#define CFG_DOC_SUPPORT_2000
-#define CFG_DOC_SUPPORT_MILLENNIUM
+#define CONFIG_SYS_MAX_DOC_DEVICE	1	/* Max number of DOC devices		*/
+#define CONFIG_SYS_DOC_SHORT_TIMEOUT
+#define CONFIG_SYS_DOC_SUPPORT_2000
+#define CONFIG_SYS_DOC_SUPPORT_MILLENNIUM
 /************************************************************
  * Keyboard support
  ************************************************************/
@@ -414,7 +414,7 @@
 #define CONFIG_USB_STORAGE
 
 /* Enable needed helper functions */
-#define CFG_DEVICE_DEREGISTER		/* needs device_deregister */
+#define CONFIG_SYS_DEVICE_DEREGISTER		/* needs device_deregister */
 #endif
 /************************************************************
  * Debug support
diff --git a/include/configs/ML2.h b/include/configs/ML2.h
index 66dae2192..190239732 100644
--- a/include/configs/ML2.h
+++ b/include/configs/ML2.h
@@ -31,13 +31,13 @@
 #define CONFIG_ML2	1	/* ...on a ML2 board	*/
 
 
-#define CFG_ENV_IS_IN_FLASH     1
+#define CONFIG_ENV_IS_IN_FLASH     1
 
-#ifdef CFG_ENV_IS_IN_NVRAM
-#undef CFG_ENV_IS_IN_FLASH
+#ifdef CONFIG_ENV_IS_IN_NVRAM
+#undef CONFIG_ENV_IS_IN_FLASH
 #else
-#ifdef CFG_ENV_IS_IN_FLASH
-#undef CFG_ENV_IS_IN_NVRAM
+#ifdef CONFIG_ENV_IS_IN_FLASH
+#undef CONFIG_ENV_IS_IN_NVRAM
 #endif
 #endif
 
@@ -73,7 +73,7 @@
 #endif
 
 #define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
-#define CFG_LOADS_BAUD_CHANGE	1	/* allow baudrate change	*/
+#define CONFIG_SYS_LOADS_BAUD_CHANGE	1	/* allow baudrate change	*/
 
 
 /*
@@ -111,95 +111,95 @@
 /*
  * Miscellaneous configurable options
  */
-#define CFG_LONGHELP			/* undef to save memory		*/
-#define CFG_PROMPT	"=> "		/* Monitor Command Prompt	*/
+#define CONFIG_SYS_LONGHELP			/* undef to save memory		*/
+#define CONFIG_SYS_PROMPT	"=> "		/* Monitor Command Prompt	*/
 #if defined(CONFIG_CMD_KGDB)
-#define	CFG_CBSIZE	1024		/* Console I/O Buffer Size	*/
+#define	CONFIG_SYS_CBSIZE	1024		/* Console I/O Buffer Size	*/
 #else
-#define	CFG_CBSIZE	256		/* Console I/O Buffer Size	*/
+#define	CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size	*/
 #endif
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define CFG_MAXARGS	16		/* max number of command args	*/
-#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS	16		/* max number of command args	*/
+#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
 
-#define CFG_MEMTEST_START	0x0400000	/* memtest works on	*/
-#define CFG_MEMTEST_END		0x0C00000	/* 4 ... 12 MB in DRAM	*/
+#define CONFIG_SYS_MEMTEST_START	0x0400000	/* memtest works on	*/
+#define CONFIG_SYS_MEMTEST_END		0x0C00000	/* 4 ... 12 MB in DRAM	*/
 
 /*
- * If CFG_EXT_SERIAL_CLOCK, then the UART divisor is 1.
- * If CFG_405_UART_ERRATA_59, then UART divisor is 31.
- * Otherwise, UART divisor is determined by CPU Clock and CFG_BASE_BAUD value.
+ * If CONFIG_SYS_EXT_SERIAL_CLOCK, then the UART divisor is 1.
+ * If CONFIG_SYS_405_UART_ERRATA_59, then UART divisor is 31.
+ * Otherwise, UART divisor is determined by CPU Clock and CONFIG_SYS_BASE_BAUD value.
  * The Linux BASE_BAUD define should match this configuration.
  *    baseBaud = cpuClock/(uartDivisor*16)
- * If CFG_405_UART_ERRATA_59 and 200MHz CPU clock,
+ * If CONFIG_SYS_405_UART_ERRATA_59 and 200MHz CPU clock,
  * set Linux BASE_BAUD to 403200.
  */
-#undef  CFG_EXT_SERIAL_CLOCK           /* external serial clock */
-#undef  CFG_405_UART_ERRATA_59         /* 405GP/CR Rev. D silicon */
-
-#define CFG_BASE_BAUD       (3125000*16)
-#define CFG_NS16550_CLK CFG_BASE_BAUD
-#define CFG_DUART_CHAN		0
-#define CFG_NS16550_COM1	0xa0001003
-#define CFG_NS16550_COM2	0xa0011003
-#define CFG_NS16550_REG_SIZE -4
-#define CFG_NS16550 1
-#define CFG_INIT_CHAN1	 1
-#define CFG_INIT_CHAN2	 1
+#undef  CONFIG_SYS_EXT_SERIAL_CLOCK           /* external serial clock */
+#undef  CONFIG_SYS_405_UART_ERRATA_59         /* 405GP/CR Rev. D silicon */
+
+#define CONFIG_SYS_BASE_BAUD       (3125000*16)
+#define CONFIG_SYS_NS16550_CLK CONFIG_SYS_BASE_BAUD
+#define CONFIG_SYS_DUART_CHAN		0
+#define CONFIG_SYS_NS16550_COM1	0xa0001003
+#define CONFIG_SYS_NS16550_COM2	0xa0011003
+#define CONFIG_SYS_NS16550_REG_SIZE -4
+#define CONFIG_SYS_NS16550 1
+#define CONFIG_SYS_INIT_CHAN1	 1
+#define CONFIG_SYS_INIT_CHAN2	 1
 
 /* The following table includes the supported baudrates */
-#define CFG_BAUDRATE_TABLE  \
+#define CONFIG_SYS_BAUDRATE_TABLE  \
     {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400}
 
-#define CFG_LOAD_ADDR		0x100000	/* default load address */
-#define CFG_EXTBDINFO		1	/* To use extended board_into (bd_t) */
+#define CONFIG_SYS_LOAD_ADDR		0x100000	/* default load address */
+#define CONFIG_SYS_EXTBDINFO		1	/* To use extended board_into (bd_t) */
 
-#define	CFG_HZ		1000		/* decrementer freq: 1 ms ticks	*/
+#define	CONFIG_SYS_HZ		1000		/* decrementer freq: 1 ms ticks	*/
 
 
 /*-----------------------------------------------------------------------
  * Start addresses for the final memory configuration
  * (Set up by the startup code)
- * Please note that CFG_SDRAM_BASE _must_ start at 0
+ * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
  */
-#define CFG_SDRAM_BASE		0x00000000
-#define CFG_FLASH_BASE		0x18000000
-#define CFG_MONITOR_BASE	CFG_FLASH_BASE
-#define CFG_MONITOR_LEN		(192 * 1024)	/* Reserve 196 kB for Monitor	*/
-#define CFG_MALLOC_LEN		(128 * 1024)	/* Reserve 128 kB for malloc()	*/
+#define CONFIG_SYS_SDRAM_BASE		0x00000000
+#define CONFIG_SYS_FLASH_BASE		0x18000000
+#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_FLASH_BASE
+#define CONFIG_SYS_MONITOR_LEN		(192 * 1024)	/* Reserve 196 kB for Monitor	*/
+#define CONFIG_SYS_MALLOC_LEN		(128 * 1024)	/* Reserve 128 kB for malloc()	*/
 
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
+#define CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
 /*-----------------------------------------------------------------------
  * FLASH organization
  */
-#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
-#define CFG_MAX_FLASH_SECT	256	/* max number of sectors on one chip	*/
+#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
+#define CONFIG_SYS_MAX_FLASH_SECT	256	/* max number of sectors on one chip	*/
 
-#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
-#define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
+#define CONFIG_SYS_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
+#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
 
 /* BEG ENVIRONNEMENT FLASH */
-#ifdef CFG_ENV_IS_IN_FLASH
-#define CFG_ENV_OFFSET		0x00050000 /* Offset of Environment Sector  */
-#define	CFG_ENV_SIZE		0x10000	/* Total Size of Environment Sector	*/
-#define CFG_ENV_SECT_SIZE	0x10000	/* see README - env sector total size	*/
+#ifdef CONFIG_ENV_IS_IN_FLASH
+#define CONFIG_ENV_OFFSET		0x00050000 /* Offset of Environment Sector  */
+#define	CONFIG_ENV_SIZE		0x10000	/* Total Size of Environment Sector	*/
+#define CONFIG_ENV_SECT_SIZE	0x10000	/* see README - env sector total size	*/
 #endif
 /* END ENVIRONNEMENT FLASH */
 /*-----------------------------------------------------------------------
  * NVRAM organization
  */
-#define CFG_NVRAM_BASE_ADDR	0xf0000000	/* NVRAM base address	*/
-#define CFG_NVRAM_SIZE		0x1ff8		/* NVRAM size	*/
+#define CONFIG_SYS_NVRAM_BASE_ADDR	0xf0000000	/* NVRAM base address	*/
+#define CONFIG_SYS_NVRAM_SIZE		0x1ff8		/* NVRAM size	*/
 
-#ifdef CFG_ENV_IS_IN_NVRAM
-#define CFG_ENV_SIZE		0x1000		/* Size of Environment vars	*/
-#define CFG_ENV_ADDR		\
-	(CFG_NVRAM_BASE_ADDR+CFG_NVRAM_SIZE-CFG_ENV_SIZE)	/* Env	*/
+#ifdef CONFIG_ENV_IS_IN_NVRAM
+#define CONFIG_ENV_SIZE		0x1000		/* Size of Environment vars	*/
+#define CONFIG_ENV_ADDR		\
+	(CONFIG_SYS_NVRAM_BASE_ADDR+CONFIG_SYS_NVRAM_SIZE-CONFIG_ENV_SIZE)	/* Env	*/
 #endif
 
 /*
@@ -208,7 +208,7 @@
  * BR0/1 and OR0/1 (FLASH)
  */
 
-#define FLASH_BASE0_PRELIM	CFG_FLASH_BASE	/* FLASH bank #0	*/
+#define FLASH_BASE0_PRELIM	CONFIG_SYS_FLASH_BASE	/* FLASH bank #0	*/
 #define FLASH_BASE1_PRELIM	0		/* FLASH bank #1	*/
 
 
@@ -219,11 +219,11 @@
  * Definitions for initial stack pointer and data area (in DPRAM)
  */
 
-#define CFG_INIT_RAM_ADDR       0x800000  /* inside of SDRAM                     */
-#define CFG_INIT_RAM_END        0x2000  /* End of used area in RAM             */
-#define CFG_GBL_DATA_SIZE      128  /* size in bytes reserved for initial data */
-#define CFG_GBL_DATA_OFFSET    (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP_OFFSET      CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_INIT_RAM_ADDR       0x800000  /* inside of SDRAM                     */
+#define CONFIG_SYS_INIT_RAM_END        0x2000  /* End of used area in RAM             */
+#define CONFIG_SYS_GBL_DATA_SIZE      128  /* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET    (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET      CONFIG_SYS_GBL_DATA_OFFSET
 
 /*-----------------------------------------------------------------------
  * Definitions for Serial Presence Detect EEPROM address
diff --git a/include/configs/MOUSSE.h b/include/configs/MOUSSE.h
index 021729b58..986590aaa 100644
--- a/include/configs/MOUSSE.h
+++ b/include/configs/MOUSSE.h
@@ -48,7 +48,7 @@
 #define CONFIG_MPC824X      1
 #define CONFIG_MPC8240      1
 #define CONFIG_MOUSSE       1
-#define CFG_ADDR_MAP_B      1
+#define CONFIG_SYS_ADDR_MAP_B      1
 #define CONFIG_CONS_INDEX   1
 #define CONFIG_BAUDRATE     9600
 #if 1
@@ -88,75 +88,75 @@
 /*
  * Miscellaneous configurable options
  */
-#undef CFG_LONGHELP                /* undef to save memory     */
-#define CFG_PROMPT      "=>"  /* Monitor Command Prompt   */
-#define CFG_CBSIZE      256        /* Console I/O Buffer Size  */
-#define CFG_PBSIZE      (CFG_CBSIZE + sizeof(CFG_PROMPT) + 16)
-#define CFG_MAXARGS     8           /* Max number of command args   */
+#undef CONFIG_SYS_LONGHELP                /* undef to save memory     */
+#define CONFIG_SYS_PROMPT      "=>"  /* Monitor Command Prompt   */
+#define CONFIG_SYS_CBSIZE      256        /* Console I/O Buffer Size  */
+#define CONFIG_SYS_PBSIZE      (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
+#define CONFIG_SYS_MAXARGS     8           /* Max number of command args   */
 
-#define CFG_BARGSIZE    CFG_CBSIZE  /* Boot Argument Buffer Size    */
-#define CFG_LOAD_ADDR   0x00100000  /* Default load address         */
+#define CONFIG_SYS_BARGSIZE    CONFIG_SYS_CBSIZE  /* Boot Argument Buffer Size    */
+#define CONFIG_SYS_LOAD_ADDR   0x00100000  /* Default load address         */
 
 /*-----------------------------------------------------------------------
  * Start addresses for the final memory configuration
  * (Set up by the startup code)
- * Please note that CFG_SDRAM_BASE _must_ start at 0
+ * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
  */
-#define CFG_SDRAM_BASE      0x00000000
+#define CONFIG_SYS_SDRAM_BASE      0x00000000
 
 #ifdef DEBUG
-#define CFG_MONITOR_BASE    CFG_SDRAM_BASE
+#define CONFIG_SYS_MONITOR_BASE    CONFIG_SYS_SDRAM_BASE
 #else
-#define CFG_MONITOR_BASE    CFG_FLASH_BASE
+#define CONFIG_SYS_MONITOR_BASE    CONFIG_SYS_FLASH_BASE
 #endif
 
 #ifdef DEBUG
-#define CFG_MONITOR_LEN     (4 << 20)	/* lots of mem ... */
+#define CONFIG_SYS_MONITOR_LEN     (4 << 20)	/* lots of mem ... */
 #else
-#define CFG_MONITOR_LEN     (512 << 10)	/* 512K PLCC bootrom */
+#define CONFIG_SYS_MONITOR_LEN     (512 << 10)	/* 512K PLCC bootrom */
 #endif
-#define CFG_MALLOC_LEN      (2*(4096 << 10))    /* 2*4096kB for malloc()  */
+#define CONFIG_SYS_MALLOC_LEN      (2*(4096 << 10))    /* 2*4096kB for malloc()  */
 
-#define CFG_MEMTEST_START   0x00004000	/* memtest works on      */
-#define CFG_MEMTEST_END     0x02000000	/* 0 ... 32 MB in DRAM   */
+#define CONFIG_SYS_MEMTEST_START   0x00004000	/* memtest works on      */
+#define CONFIG_SYS_MEMTEST_END     0x02000000	/* 0 ... 32 MB in DRAM   */
 
 
-#define CFG_EUMB_ADDR       0xFC000000
+#define CONFIG_SYS_EUMB_ADDR       0xFC000000
 
-#define CFG_ISA_MEM         0xFD000000
-#define CFG_ISA_IO          0xFE000000
+#define CONFIG_SYS_ISA_MEM         0xFD000000
+#define CONFIG_SYS_ISA_IO          0xFE000000
 
-#define CFG_FLASH_BASE      0xFFF00000
-#define CFG_FLASH_SIZE      ((uint)(512 * 1024))
-#define CFG_RESET_ADDRESS   0xFFF00100
+#define CONFIG_SYS_FLASH_BASE      0xFFF00000
+#define CONFIG_SYS_FLASH_SIZE      ((uint)(512 * 1024))
+#define CONFIG_SYS_RESET_ADDRESS   0xFFF00100
 #define FLASH_BASE0_PRELIM  0xFFF00000  /* 512K PLCC FLASH/AM29F040*/
 #define FLASH_BASE0_SIZE    0x80000     /* 512K */
 #define FLASH_BASE1_PRELIM  0xFFE10000  /* AMD 29LV160DB
 					   1MB - 64K FLASH0 SEG =960K
 					   (size=0xf0000)*/
 
-#define CFG_BAUDRATE_TABLE  { 9600, 19200, 38400, 57600, 115200 }
+#define CONFIG_SYS_BAUDRATE_TABLE  { 9600, 19200, 38400, 57600, 115200 }
 
 /*
  * NS16550 Configuration
  */
-#define CFG_NS16550
-#define CFG_NS16550_SERIAL
+#define CONFIG_SYS_NS16550
+#define CONFIG_SYS_NS16550_SERIAL
 
-#define CFG_NS16550_REG_SIZE	1
+#define CONFIG_SYS_NS16550_REG_SIZE	1
 
-#define CFG_NS16550_CLK		18432000
+#define CONFIG_SYS_NS16550_CLK		18432000
 
-#define CFG_NS16550_COM1	0xFFE08080
+#define CONFIG_SYS_NS16550_COM1	0xFFE08080
 
 /*-----------------------------------------------------------------------
  * Definitions for initial stack pointer and data area (in DPRAM)
  */
-#define CFG_INIT_RAM_ADDR CFG_SDRAM_BASE + CFG_MONITOR_LEN
-#define CFG_INIT_RAM_END   0x2F00  /* End of used area in DPRAM  */
-#define CFG_GBL_DATA_SIZE  64  /* size in bytes reserved for initial data */
-#define CFG_GBL_DATA_OFFSET  (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP_OFFSET  CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_SDRAM_BASE + CONFIG_SYS_MONITOR_LEN
+#define CONFIG_SYS_INIT_RAM_END   0x2F00  /* End of used area in DPRAM  */
+#define CONFIG_SYS_GBL_DATA_SIZE  64  /* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET  (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET  CONFIG_SYS_GBL_DATA_OFFSET
 
 /*
  * Low Level Configuration Settings
@@ -167,24 +167,24 @@
 
 #define CONFIG_SYS_CLK_FREQ  33000000	/* external frequency to pll */
 #define CONFIG_PLL_PCI_TO_MEM_MULTIPLIER  2
-#define CFG_HZ               1000
+#define CONFIG_SYS_HZ               1000
 
-#define CFG_ETH_DEV_FN       0x00
-#define CFG_ETH_IOBASE       0x00104000
+#define CONFIG_SYS_ETH_DEV_FN       0x00
+#define CONFIG_SYS_ETH_IOBASE       0x00104000
 
 
 	/* Bit-field values for MCCR1.
 	 */
-#define CFG_ROMNAL          8
-#define CFG_ROMFAL          8
+#define CONFIG_SYS_ROMNAL          8
+#define CONFIG_SYS_ROMFAL          8
 
 	/* Bit-field values for MCCR2.
 	 */
-#define CFG_REFINT          0xf5     /* Refresh interval               */
+#define CONFIG_SYS_REFINT          0xf5     /* Refresh interval               */
 
 	/* Burst To Precharge. Bits of this value go to MCCR3 and MCCR4.
 	 */
-#define CFG_BSTOPRE         0x79
+#define CONFIG_SYS_BSTOPRE         0x79
 
 #ifdef INCLUDE_ECC
 #define USE_ECC				1
@@ -195,18 +195,18 @@
 
 	/* Bit-field values for MCCR3.
 	 */
-#define CFG_REFREC          8       /* Refresh to activate interval   */
-#define CFG_RDLAT           (4+USE_ECC)   /* Data latancy from read command */
+#define CONFIG_SYS_REFREC          8       /* Refresh to activate interval   */
+#define CONFIG_SYS_RDLAT           (4+USE_ECC)   /* Data latancy from read command */
 
 	/* Bit-field values for MCCR4.
 	 */
-#define CFG_PRETOACT        3       /* Precharge to activate interval */
-#define CFG_ACTTOPRE        5       /* Activate to Precharge interval */
-#define CFG_SDMODE_CAS_LAT  3       /* SDMODE CAS latancy             */
-#define CFG_SDMODE_WRAP     0       /* SDMODE wrap type               */
-#define CFG_SDMODE_BURSTLEN 2       /* SDMODE Burst length            */
-#define CFG_ACTORW          2
-#define CFG_REGISTERD_TYPE_BUFFER (1-USE_ECC)
+#define CONFIG_SYS_PRETOACT        3       /* Precharge to activate interval */
+#define CONFIG_SYS_ACTTOPRE        5       /* Activate to Precharge interval */
+#define CONFIG_SYS_SDMODE_CAS_LAT  3       /* SDMODE CAS latancy             */
+#define CONFIG_SYS_SDMODE_WRAP     0       /* SDMODE wrap type               */
+#define CONFIG_SYS_SDMODE_BURSTLEN 2       /* SDMODE Burst length            */
+#define CONFIG_SYS_ACTORW          2
+#define CONFIG_SYS_REGISTERD_TYPE_BUFFER (1-USE_ECC)
 
 /* Memory bank settings.
  * Only bits 20-29 are actually used from these vales to set the
@@ -214,71 +214,71 @@
  * 20 bits will be 0x00000 for a start address, or 0xfffff for an end
  * address. Refer to the MPC8240 book.
  */
-#define CFG_RAM_SIZE        0x04000000  /* 64MB */
-
-
-#define CFG_BANK0_START     0x00000000
-#define CFG_BANK0_END       (CFG_RAM_SIZE - 1)
-#define CFG_BANK0_ENABLE    1
-#define CFG_BANK1_START     0x3ff00000
-#define CFG_BANK1_END       0x3fffffff
-#define CFG_BANK1_ENABLE    0
-#define CFG_BANK2_START     0x3ff00000
-#define CFG_BANK2_END       0x3fffffff
-#define CFG_BANK2_ENABLE    0
-#define CFG_BANK3_START     0x3ff00000
-#define CFG_BANK3_END       0x3fffffff
-#define CFG_BANK3_ENABLE    0
-#define CFG_BANK4_START     0x3ff00000
-#define CFG_BANK4_END       0x3fffffff
-#define CFG_BANK4_ENABLE    0
-#define CFG_BANK5_START     0x3ff00000
-#define CFG_BANK5_END       0x3fffffff
-#define CFG_BANK5_ENABLE    0
-#define CFG_BANK6_START     0x3ff00000
-#define CFG_BANK6_END       0x3fffffff
-#define CFG_BANK6_ENABLE    0
-#define CFG_BANK7_START     0x3ff00000
-#define CFG_BANK7_END       0x3fffffff
-#define CFG_BANK7_ENABLE    0
-
-#define CFG_ODCR            0x7f
-
-
-#define CFG_PGMAX           0x32 /* how long the 8240 reatins the currently accessed page in memory
+#define CONFIG_SYS_RAM_SIZE        0x04000000  /* 64MB */
+
+
+#define CONFIG_SYS_BANK0_START     0x00000000
+#define CONFIG_SYS_BANK0_END       (CONFIG_SYS_RAM_SIZE - 1)
+#define CONFIG_SYS_BANK0_ENABLE    1
+#define CONFIG_SYS_BANK1_START     0x3ff00000
+#define CONFIG_SYS_BANK1_END       0x3fffffff
+#define CONFIG_SYS_BANK1_ENABLE    0
+#define CONFIG_SYS_BANK2_START     0x3ff00000
+#define CONFIG_SYS_BANK2_END       0x3fffffff
+#define CONFIG_SYS_BANK2_ENABLE    0
+#define CONFIG_SYS_BANK3_START     0x3ff00000
+#define CONFIG_SYS_BANK3_END       0x3fffffff
+#define CONFIG_SYS_BANK3_ENABLE    0
+#define CONFIG_SYS_BANK4_START     0x3ff00000
+#define CONFIG_SYS_BANK4_END       0x3fffffff
+#define CONFIG_SYS_BANK4_ENABLE    0
+#define CONFIG_SYS_BANK5_START     0x3ff00000
+#define CONFIG_SYS_BANK5_END       0x3fffffff
+#define CONFIG_SYS_BANK5_ENABLE    0
+#define CONFIG_SYS_BANK6_START     0x3ff00000
+#define CONFIG_SYS_BANK6_END       0x3fffffff
+#define CONFIG_SYS_BANK6_ENABLE    0
+#define CONFIG_SYS_BANK7_START     0x3ff00000
+#define CONFIG_SYS_BANK7_END       0x3fffffff
+#define CONFIG_SYS_BANK7_ENABLE    0
+
+#define CONFIG_SYS_ODCR            0x7f
+
+
+#define CONFIG_SYS_PGMAX           0x32 /* how long the 8240 reatins the currently accessed page in memory
 				    see 8240 book for details*/
 #define PCI_MEM_SPACE1_START	0x80000000
 #define PCI_MEM_SPACE2_START	0xfd000000
 
 /* IBAT/DBAT Configuration */
 /* Ram: 64MB, starts at address-0, r/w instruction/data */
-#define CFG_IBAT0U      (CFG_SDRAM_BASE | BATU_BL_64M | BATU_VS | BATU_VP)
-#define CFG_IBAT0L      (CFG_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
-#define CFG_DBAT0U      CFG_IBAT0U
-#define CFG_DBAT0L      CFG_IBAT0L
+#define CONFIG_SYS_IBAT0U      (CONFIG_SYS_SDRAM_BASE | BATU_BL_64M | BATU_VS | BATU_VP)
+#define CONFIG_SYS_IBAT0L      (CONFIG_SYS_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
+#define CONFIG_SYS_DBAT0U      CONFIG_SYS_IBAT0U
+#define CONFIG_SYS_DBAT0L      CONFIG_SYS_IBAT0L
 
 /* MPLD/Port-X I/O Space : data and instruction read/write,  cache-inhibit */
-#define CFG_IBAT1U      (PORTX_DEV_BASE | BATU_BL_128M | BATU_VS | BATU_VP)
+#define CONFIG_SYS_IBAT1U      (PORTX_DEV_BASE | BATU_BL_128M | BATU_VS | BATU_VP)
 #if 0
-#define CFG_IBAT1L      (PORTX_DEV_BASE | BATL_PP_10  | BATL_MEMCOHERENCE |\
+#define CONFIG_SYS_IBAT1L      (PORTX_DEV_BASE | BATL_PP_10  | BATL_MEMCOHERENCE |\
 			 BATL_WRITETHROUGH | BATL_CACHEINHIBIT)
 #else
-#define CFG_IBAT1L      (PORTX_DEV_BASE | BATL_PP_10 |BATL_CACHEINHIBIT)
+#define CONFIG_SYS_IBAT1L      (PORTX_DEV_BASE | BATL_PP_10 |BATL_CACHEINHIBIT)
 #endif
-#define CFG_DBAT1U	CFG_IBAT1U
-#define CFG_DBAT1L	CFG_IBAT1L
+#define CONFIG_SYS_DBAT1U	CONFIG_SYS_IBAT1U
+#define CONFIG_SYS_DBAT1L	CONFIG_SYS_IBAT1L
 
 /* PCI Memory region 1: 0x8XXX_XXXX PCI Mem space: EUMBAR, etc - 16MB */
-#define CFG_IBAT2U	(PCI_MEM_SPACE1_START|BATU_BL_16M | BATU_VS | BATU_VP)
-#define CFG_IBAT2L	(PCI_MEM_SPACE1_START|BATL_PP_10 | BATL_GUARDEDSTORAGE|BATL_CACHEINHIBIT)
-#define CFG_DBAT2U      CFG_IBAT2U
-#define CFG_DBAT2L      CFG_IBAT2L
+#define CONFIG_SYS_IBAT2U	(PCI_MEM_SPACE1_START|BATU_BL_16M | BATU_VS | BATU_VP)
+#define CONFIG_SYS_IBAT2L	(PCI_MEM_SPACE1_START|BATL_PP_10 | BATL_GUARDEDSTORAGE|BATL_CACHEINHIBIT)
+#define CONFIG_SYS_DBAT2U      CONFIG_SYS_IBAT2U
+#define CONFIG_SYS_DBAT2L      CONFIG_SYS_IBAT2L
 
 /* PCI Memory region 2: PCI Devices in 0xFD space */
-#define CFG_IBAT3U	(PCI_MEM_SPACE2_START|BATU_BL_16M | BATU_VS | BATU_VP)
-#define CFG_IBAT3L	(PCI_MEM_SPACE2_START|BATL_PP_10 | BATL_GUARDEDSTORAGE | BATL_CACHEINHIBIT)
-#define CFG_DBAT3U      CFG_IBAT3U
-#define CFG_DBAT3L      CFG_IBAT3L
+#define CONFIG_SYS_IBAT3U	(PCI_MEM_SPACE2_START|BATU_BL_16M | BATU_VS | BATU_VP)
+#define CONFIG_SYS_IBAT3L	(PCI_MEM_SPACE2_START|BATL_PP_10 | BATL_GUARDEDSTORAGE | BATL_CACHEINHIBIT)
+#define CONFIG_SYS_DBAT3U      CONFIG_SYS_IBAT3U
+#define CONFIG_SYS_DBAT3L      CONFIG_SYS_IBAT3L
 
 
 /*
@@ -286,31 +286,31 @@
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define CFG_BOOTMAPSZ       (8 << 20)   /* Initial Memory map for Linux */
+#define CONFIG_SYS_BOOTMAPSZ       (8 << 20)   /* Initial Memory map for Linux */
 
 /*-----------------------------------------------------------------------
  * FLASH organization
  */
-#define CFG_MAX_FLASH_BANKS     3       /* Max number of flash banks         */
-#define CFG_MAX_FLASH_SECT      64      /* Max number of sectors in one bank */
+#define CONFIG_SYS_MAX_FLASH_BANKS     3       /* Max number of flash banks         */
+#define CONFIG_SYS_MAX_FLASH_SECT      64      /* Max number of sectors in one bank */
 
-#define CFG_FLASH_ERASE_TOUT    120000  /* Timeout for Flash Erase (in ms)   */
-#define CFG_FLASH_WRITE_TOUT    500     /* Timeout for Flash Write (in ms)   */
+#define CONFIG_SYS_FLASH_ERASE_TOUT    120000  /* Timeout for Flash Erase (in ms)   */
+#define CONFIG_SYS_FLASH_WRITE_TOUT    500     /* Timeout for Flash Write (in ms)   */
 
 #if 0
-#define	CFG_ENV_IS_IN_FLASH	    1
-#define CFG_ENV_OFFSET          0x8000  /* Offset of the Environment Sector	*/
-#define CFG_ENV_SIZE            0x4000  /* Size of the Environment Sector    */
+#define	CONFIG_ENV_IS_IN_FLASH	    1
+#define CONFIG_ENV_OFFSET          0x8000  /* Offset of the Environment Sector	*/
+#define CONFIG_ENV_SIZE            0x4000  /* Size of the Environment Sector    */
 #else
-#define CFG_ENV_IS_IN_NVRAM          1
-#define CFG_ENV_ADDR            NV_OFF_U_BOOT_ADDR /* PortX NVM Free addr*/
-#define CFG_ENV_OFFSET          CFG_ENV_ADDR
-#define CFG_ENV_SIZE            NV_U_BOOT_ENV_SIZE /* 2K */
+#define CONFIG_ENV_IS_IN_NVRAM          1
+#define CONFIG_ENV_ADDR            NV_OFF_U_BOOT_ADDR /* PortX NVM Free addr*/
+#define CONFIG_ENV_OFFSET          CONFIG_ENV_ADDR
+#define CONFIG_ENV_SIZE            NV_U_BOOT_ENV_SIZE /* 2K */
 #endif
 /*-----------------------------------------------------------------------
  * Cache Configuration
  */
-#define CFG_CACHELINE_SIZE  16
+#define CONFIG_SYS_CACHELINE_SIZE  16
 
 
 /*
diff --git a/include/configs/MPC8260ADS.h b/include/configs/MPC8260ADS.h
index 59d0bdbeb..42fbe90a4 100644
--- a/include/configs/MPC8260ADS.h
+++ b/include/configs/MPC8260ADS.h
@@ -52,24 +52,24 @@
  * Figure out if we are booting low via flash HRCW or high via the BCSR.
  */
 #if (TEXT_BASE != 0xFFF00000)		/* Boot low (flash HRCW) */
-#   define CFG_LOWBOOT		1
+#   define CONFIG_SYS_LOWBOOT		1
 #endif
 
 /* ADS flavours */
-#define CFG_8260ADS		1	/* MPC8260ADS */
-#define CFG_8266ADS		2	/* MPC8266ADS */
-#define CFG_PQ2FADS		3	/* PQ2FADS-ZU or PQ2FADS-VR */
-#define CFG_8272ADS		4	/* MPC8272ADS */
+#define CONFIG_SYS_8260ADS		1	/* MPC8260ADS */
+#define CONFIG_SYS_8266ADS		2	/* MPC8266ADS */
+#define CONFIG_SYS_PQ2FADS		3	/* PQ2FADS-ZU or PQ2FADS-VR */
+#define CONFIG_SYS_8272ADS		4	/* MPC8272ADS */
 
 #ifndef CONFIG_ADSTYPE
-#define CONFIG_ADSTYPE		CFG_8260ADS
+#define CONFIG_ADSTYPE		CONFIG_SYS_8260ADS
 #endif /* CONFIG_ADSTYPE */
 
-#if CONFIG_ADSTYPE == CFG_8272ADS
+#if CONFIG_ADSTYPE == CONFIG_SYS_8272ADS
 #define CONFIG_MPC8272		1
 #else
 #define CONFIG_MPC8260		1
-#endif /* CONFIG_ADSTYPE == CFG_8272ADS */
+#endif /* CONFIG_ADSTYPE == CONFIG_SYS_8272ADS */
 
 #define CONFIG_BOARD_EARLY_INIT_F 1	/* Call board_early_init_f	*/
 
@@ -113,26 +113,26 @@
 
 #if   CONFIG_ETHER_INDEX == 1
 
-# define CFG_PHY_ADDR		0
-# define CFG_CMXFCR_VALUE	(CMXFCR_RF1CS_CLK11 | CMXFCR_TF1CS_CLK10)
-# define CFG_CMXFCR_MASK	(CMXFCR_FC1 | CMXFCR_RF1CS_MSK | CMXFCR_TF1CS_MSK)
+# define CONFIG_SYS_PHY_ADDR		0
+# define CONFIG_SYS_CMXFCR_VALUE	(CMXFCR_RF1CS_CLK11 | CMXFCR_TF1CS_CLK10)
+# define CONFIG_SYS_CMXFCR_MASK	(CMXFCR_FC1 | CMXFCR_RF1CS_MSK | CMXFCR_TF1CS_MSK)
 
 #elif CONFIG_ETHER_INDEX == 2
 
-#if CONFIG_ADSTYPE == CFG_8272ADS	/* RxCLK is CLK15, TxCLK is CLK16 */
-# define CFG_PHY_ADDR		3
-# define CFG_CMXFCR_VALUE	(CMXFCR_RF2CS_CLK15 | CMXFCR_TF2CS_CLK16)
+#if CONFIG_ADSTYPE == CONFIG_SYS_8272ADS	/* RxCLK is CLK15, TxCLK is CLK16 */
+# define CONFIG_SYS_PHY_ADDR		3
+# define CONFIG_SYS_CMXFCR_VALUE	(CMXFCR_RF2CS_CLK15 | CMXFCR_TF2CS_CLK16)
 #else					/* RxCLK is CLK13, TxCLK is CLK14 */
-# define CFG_PHY_ADDR		0
-# define CFG_CMXFCR_VALUE	(CMXFCR_RF2CS_CLK13 | CMXFCR_TF2CS_CLK14)
-#endif /* CONFIG_ADSTYPE == CFG_8272ADS */
+# define CONFIG_SYS_PHY_ADDR		0
+# define CONFIG_SYS_CMXFCR_VALUE	(CMXFCR_RF2CS_CLK13 | CMXFCR_TF2CS_CLK14)
+#endif /* CONFIG_ADSTYPE == CONFIG_SYS_8272ADS */
 
-# define CFG_CMXFCR_MASK	(CMXFCR_FC2 | CMXFCR_RF2CS_MSK | CMXFCR_TF2CS_MSK)
+# define CONFIG_SYS_CMXFCR_MASK	(CMXFCR_FC2 | CMXFCR_RF2CS_MSK | CMXFCR_TF2CS_MSK)
 
 #endif	/* CONFIG_ETHER_INDEX */
 
-#define CFG_CPMFCR_RAMTYPE	0		/* BDs and buffers on 60x bus */
-#define CFG_FCC_PSMR		(FCC_PSMR_FDE | FCC_PSMR_LPB)  /* Full duplex */
+#define CONFIG_SYS_CPMFCR_RAMTYPE	0		/* BDs and buffers on 60x bus */
+#define CONFIG_SYS_FCC_PSMR		(FCC_PSMR_FDE | FCC_PSMR_LPB)  /* Full duplex */
 
 #define CONFIG_MII			/* MII PHY management		*/
 #define CONFIG_BITBANGMII		/* bit-bang MII PHY management	*/
@@ -141,39 +141,39 @@
  */
 #define MDIO_PORT	2		/* Port C */
 
-#if CONFIG_ADSTYPE == CFG_8272ADS
-#define CFG_MDIO_PIN	0x00002000	/* PC18 */
-#define CFG_MDC_PIN	0x00001000	/* PC19 */
+#if CONFIG_ADSTYPE == CONFIG_SYS_8272ADS
+#define CONFIG_SYS_MDIO_PIN	0x00002000	/* PC18 */
+#define CONFIG_SYS_MDC_PIN	0x00001000	/* PC19 */
 #else
-#define CFG_MDIO_PIN	0x00400000	/* PC9	*/
-#define CFG_MDC_PIN	0x00200000	/* PC10 */
-#endif /* CONFIG_ADSTYPE == CFG_8272ADS */
+#define CONFIG_SYS_MDIO_PIN	0x00400000	/* PC9	*/
+#define CONFIG_SYS_MDC_PIN	0x00200000	/* PC10 */
+#endif /* CONFIG_ADSTYPE == CONFIG_SYS_8272ADS */
 
-#define MDIO_ACTIVE	(iop->pdir |=  CFG_MDIO_PIN)
-#define MDIO_TRISTATE	(iop->pdir &= ~CFG_MDIO_PIN)
-#define MDIO_READ	((iop->pdat &  CFG_MDIO_PIN) != 0)
+#define MDIO_ACTIVE	(iop->pdir |=  CONFIG_SYS_MDIO_PIN)
+#define MDIO_TRISTATE	(iop->pdir &= ~CONFIG_SYS_MDIO_PIN)
+#define MDIO_READ	((iop->pdat &  CONFIG_SYS_MDIO_PIN) != 0)
 
-#define MDIO(bit)	if(bit) iop->pdat |=  CFG_MDIO_PIN; \
-			else	iop->pdat &= ~CFG_MDIO_PIN
+#define MDIO(bit)	if(bit) iop->pdat |=  CONFIG_SYS_MDIO_PIN; \
+			else	iop->pdat &= ~CONFIG_SYS_MDIO_PIN
 
-#define MDC(bit)	if(bit) iop->pdat |=  CFG_MDC_PIN; \
-			else	iop->pdat &= ~CFG_MDC_PIN
+#define MDC(bit)	if(bit) iop->pdat |=  CONFIG_SYS_MDC_PIN; \
+			else	iop->pdat &= ~CONFIG_SYS_MDC_PIN
 
 #define MIIDELAY	udelay(1)
 
 #endif /* CONFIG_ETHER_ON_FCC */
 
-#if CONFIG_ADSTYPE >= CFG_PQ2FADS
+#if CONFIG_ADSTYPE >= CONFIG_SYS_PQ2FADS
 #undef CONFIG_SPD_EEPROM	/* On new boards, SDRAM is soldered */
 #else
 #define CONFIG_HARD_I2C		1	/* To enable I2C support	*/
-#define CFG_I2C_SPEED		100000	/* I2C speed and slave address	*/
-#define CFG_I2C_SLAVE		0x7F
+#define CONFIG_SYS_I2C_SPEED		100000	/* I2C speed and slave address	*/
+#define CONFIG_SYS_I2C_SLAVE		0x7F
 
 #if defined(CONFIG_SPD_EEPROM) && !defined(CONFIG_SPD_ADDR)
 #define CONFIG_SPD_ADDR		0x50
 #endif
-#endif /* CONFIG_ADSTYPE >= CFG_PQ2FADS */
+#endif /* CONFIG_ADSTYPE >= CONFIG_SYS_PQ2FADS */
 
 /*PCI*/
 #ifdef CONFIG_MPC8272
@@ -188,7 +188,7 @@
 #endif
 
 #ifndef CONFIG_8260_CLKIN
-#if CONFIG_ADSTYPE >= CFG_PQ2FADS
+#if CONFIG_ADSTYPE >= CONFIG_SYS_PQ2FADS
 #define CONFIG_8260_CLKIN	100000000	/* in Hz */
 #else
 #define CONFIG_8260_CLKIN	66000000	/* in Hz */
@@ -237,11 +237,11 @@
 
 #undef CONFIG_CMD_XIMG
 
-#if CONFIG_ADSTYPE == CFG_8272ADS
+#if CONFIG_ADSTYPE == CONFIG_SYS_8272ADS
     #undef CONFIG_CMD_SDRAM
     #undef CONFIG_CMD_I2C
 
-#elif CONFIG_ADSTYPE >= CFG_PQ2FADS
+#elif CONFIG_ADSTYPE >= CONFIG_SYS_PQ2FADS
     #undef CONFIG_CMD_SDRAM
     #undef CONFIG_CMD_I2C
     #undef CONFIG_CMD_PCI
@@ -249,7 +249,7 @@
 #else
     #undef CONFIG_CMD_PCI
 
-#endif /* CONFIG_ADSTYPE >= CFG_PQ2FADS */
+#endif /* CONFIG_ADSTYPE >= CONFIG_SYS_PQ2FADS */
 
 
 #define CONFIG_BOOTDELAY	5		/* autoboot after 5 seconds */
@@ -270,37 +270,37 @@
 /*
  * Miscellaneous configurable options
  */
-#define CFG_HUSH_PARSER
-#define CFG_PROMPT_HUSH_PS2 "> "
-#define CFG_LONGHELP			/* undef to save memory	    */
-#define CFG_PROMPT	"=> "		/* Monitor Command Prompt   */
+#define CONFIG_SYS_HUSH_PARSER
+#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
+#define CONFIG_SYS_LONGHELP			/* undef to save memory	    */
+#define CONFIG_SYS_PROMPT	"=> "		/* Monitor Command Prompt   */
 #if defined(CONFIG_CMD_KGDB)
-#define CFG_CBSIZE	1024		/* Console I/O Buffer Size  */
+#define CONFIG_SYS_CBSIZE	1024		/* Console I/O Buffer Size  */
 #else
-#define CFG_CBSIZE	256			/* Console I/O Buffer Size  */
+#define CONFIG_SYS_CBSIZE	256			/* Console I/O Buffer Size  */
 #endif
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16)	/* Print Buffer Size */
-#define CFG_MAXARGS	16			/* max number of command args	*/
-#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)	/* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS	16			/* max number of command args	*/
+#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
 
-#define CFG_MEMTEST_START	0x00100000	/* memtest works on */
-#define CFG_MEMTEST_END		0x00f00000	/* 1 ... 15 MB in DRAM	*/
+#define CONFIG_SYS_MEMTEST_START	0x00100000	/* memtest works on */
+#define CONFIG_SYS_MEMTEST_END		0x00f00000	/* 1 ... 15 MB in DRAM	*/
 
-#define CFG_LOAD_ADDR		0x400000	/* default load address */
+#define CONFIG_SYS_LOAD_ADDR		0x400000	/* default load address */
 
-#define CFG_HZ			1000	/* decrementer freq: 1 ms ticks */
+#define CONFIG_SYS_HZ			1000	/* decrementer freq: 1 ms ticks */
 
-#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
 
-#define CFG_FLASH_BASE		0xff800000
-#define CFG_MAX_FLASH_BANKS	1	/* max num of memory banks	*/
-#define CFG_MAX_FLASH_SECT	32	/* max num of sects on one chip */
-#define CFG_FLASH_SIZE		8
-#define CFG_FLASH_ERASE_TOUT	8000	/* Timeout for Flash Erase (in ms)    */
-#define CFG_FLASH_WRITE_TOUT	5	/* Timeout for Flash Write (in ms)    */
-#define CFG_FLASH_LOCK_TOUT	5	/* Timeout for Flash Set Lock Bit (in ms) */
-#define CFG_FLASH_UNLOCK_TOUT	10000	/* Timeout for Flash Clear Lock Bits (in ms) */
-#define CFG_FLASH_PROTECTION		/* "Real" (hardware) sectors protection */
+#define CONFIG_SYS_FLASH_BASE		0xff800000
+#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max num of memory banks	*/
+#define CONFIG_SYS_MAX_FLASH_SECT	32	/* max num of sects on one chip */
+#define CONFIG_SYS_FLASH_SIZE		8
+#define CONFIG_SYS_FLASH_ERASE_TOUT	8000	/* Timeout for Flash Erase (in ms)    */
+#define CONFIG_SYS_FLASH_WRITE_TOUT	5	/* Timeout for Flash Write (in ms)    */
+#define CONFIG_SYS_FLASH_LOCK_TOUT	5	/* Timeout for Flash Set Lock Bit (in ms) */
+#define CONFIG_SYS_FLASH_UNLOCK_TOUT	10000	/* Timeout for Flash Clear Lock Bits (in ms) */
+#define CONFIG_SYS_FLASH_PROTECTION		/* "Real" (hardware) sectors protection */
 
 /*
  * JFFS2 partitions
@@ -309,20 +309,20 @@
  */
 #define MTDIDS_DEFAULT		"nor0=mpc8260ads-0"
 #define MTDPARTS_DEFAULT	"mtdparts=mpc8260ads-0:-@1m(jffs2)"
-#define CFG_JFFS2_SORT_FRAGMENTS
+#define CONFIG_SYS_JFFS2_SORT_FRAGMENTS
 
 /* this is stuff came out of the Motorola docs */
-#ifndef CFG_LOWBOOT
-#define CFG_DEFAULT_IMMR	0x0F010000
+#ifndef CONFIG_SYS_LOWBOOT
+#define CONFIG_SYS_DEFAULT_IMMR	0x0F010000
 #endif
 
-#define CFG_IMMR		0xF0000000
-#define CFG_BCSR		0xF4500000
-#if CONFIG_ADSTYPE == CFG_8272ADS
-#define CFG_PCI_INT		0xF8200000
+#define CONFIG_SYS_IMMR		0xF0000000
+#define CONFIG_SYS_BCSR		0xF4500000
+#if CONFIG_ADSTYPE == CONFIG_SYS_8272ADS
+#define CONFIG_SYS_PCI_INT		0xF8200000
 #endif
-#define CFG_SDRAM_BASE		0x00000000
-#define CFG_LSDRAM_BASE		0xFD000000
+#define CONFIG_SYS_SDRAM_BASE		0x00000000
+#define CONFIG_SYS_LSDRAM_BASE		0xFD000000
 
 #define RS232EN_1		0x02000002
 #define RS232EN_2		0x01000001
@@ -332,127 +332,127 @@
 #define FETH2_RST		0x08000000
 #define BCSR_PCI_MODE		0x01000000
 
-#define CFG_INIT_RAM_ADDR	CFG_IMMR
-#define CFG_INIT_RAM_END	0x2000	/* End of used area in DPRAM	*/
-#define CFG_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_IMMR
+#define CONFIG_SYS_INIT_RAM_END	0x2000	/* End of used area in DPRAM	*/
+#define CONFIG_SYS_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
-#ifdef CFG_LOWBOOT
+#ifdef CONFIG_SYS_LOWBOOT
 /* PQ2FADS flash HRCW = 0x0EB4B645 */
-#define CFG_HRCW_MASTER (   ( HRCW_BPS11 | HRCW_CIP )			    |\
+#define CONFIG_SYS_HRCW_MASTER (   ( HRCW_BPS11 | HRCW_CIP )			    |\
 			    ( HRCW_L2CPC10 | HRCW_DPPC11 | HRCW_ISB100 )    |\
 			    ( HRCW_BMS | HRCW_MMR11 | HRCW_LBPC01 | HRCW_APPC10 ) |\
 			    ( HRCW_CS10PC01 | HRCW_MODCK_H0101 )	     \
 			)
 #else
 /* PQ2FADS BCSR HRCW = 0x0CB23645 */
-#define CFG_HRCW_MASTER (   ( HRCW_BPS11 | HRCW_CIP )			    |\
+#define CONFIG_SYS_HRCW_MASTER (   ( HRCW_BPS11 | HRCW_CIP )			    |\
 			    ( HRCW_L2CPC10 | HRCW_DPPC10 | HRCW_ISB010 )    |\
 			    ( HRCW_BMS | HRCW_APPC10 )			    |\
 			    ( HRCW_MODCK_H0101 )			     \
 			)
 #endif
 /* no slaves */
-#define CFG_HRCW_SLAVE1 0
-#define CFG_HRCW_SLAVE2 0
-#define CFG_HRCW_SLAVE3 0
-#define CFG_HRCW_SLAVE4 0
-#define CFG_HRCW_SLAVE5 0
-#define CFG_HRCW_SLAVE6 0
-#define CFG_HRCW_SLAVE7 0
+#define CONFIG_SYS_HRCW_SLAVE1 0
+#define CONFIG_SYS_HRCW_SLAVE2 0
+#define CONFIG_SYS_HRCW_SLAVE3 0
+#define CONFIG_SYS_HRCW_SLAVE4 0
+#define CONFIG_SYS_HRCW_SLAVE5 0
+#define CONFIG_SYS_HRCW_SLAVE6 0
+#define CONFIG_SYS_HRCW_SLAVE7 0
 
 #define BOOTFLAG_COLD	0x01	/* Normal Power-On: Boot from FLASH  */
 #define BOOTFLAG_WARM	0x02	/* Software reboot	     */
 
-#define CFG_MONITOR_BASE    TEXT_BASE
-#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
-#   define CFG_RAMBOOT
+#define CONFIG_SYS_MONITOR_BASE    TEXT_BASE
+#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
+#   define CONFIG_SYS_RAMBOOT
 #endif
 
-#define CFG_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor	*/
-#define CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
+#define CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor	*/
+#define CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
 
 #ifdef CONFIG_BZIP2
-#define CFG_MALLOC_LEN		(4096 << 10)	/* Reserve 4 MB for malloc()	*/
+#define CONFIG_SYS_MALLOC_LEN		(4096 << 10)	/* Reserve 4 MB for malloc()	*/
 #else
-#define CFG_MALLOC_LEN		(128 << 10)	/* Reserve 128 KB for malloc()	*/
+#define CONFIG_SYS_MALLOC_LEN		(128 << 10)	/* Reserve 128 KB for malloc()	*/
 #endif /* CONFIG_BZIP2 */
 
-#ifndef CFG_RAMBOOT
-#  define CFG_ENV_IS_IN_FLASH	1
-#  define CFG_ENV_SECT_SIZE	0x40000
-#  define CFG_ENV_ADDR		(CFG_MONITOR_BASE + CFG_ENV_SECT_SIZE)
+#ifndef CONFIG_SYS_RAMBOOT
+#  define CONFIG_ENV_IS_IN_FLASH	1
+#  define CONFIG_ENV_SECT_SIZE	0x40000
+#  define CONFIG_ENV_ADDR		(CONFIG_SYS_MONITOR_BASE + CONFIG_ENV_SECT_SIZE)
 #else
-#  define CFG_ENV_IS_IN_NVRAM	1
-#  define CFG_ENV_ADDR		(CFG_MONITOR_BASE - 0x1000)
-#  define CFG_ENV_SIZE		0x200
-#endif /* CFG_RAMBOOT */
+#  define CONFIG_ENV_IS_IN_NVRAM	1
+#  define CONFIG_ENV_ADDR		(CONFIG_SYS_MONITOR_BASE - 0x1000)
+#  define CONFIG_ENV_SIZE		0x200
+#endif /* CONFIG_SYS_RAMBOOT */
 
-#define CFG_CACHELINE_SIZE	32	/* For MPC8260 CPU */
+#define CONFIG_SYS_CACHELINE_SIZE	32	/* For MPC8260 CPU */
 #if defined(CONFIG_CMD_KGDB)
-#  define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value */
+#  define CONFIG_SYS_CACHELINE_SHIFT	5	/* log base 2 of the above value */
 #endif
 
-#define CFG_HID0_INIT		0
-#define CFG_HID0_FINAL		(HID0_ICE | HID0_IFEM | HID0_ABE )
+#define CONFIG_SYS_HID0_INIT		0
+#define CONFIG_SYS_HID0_FINAL		(HID0_ICE | HID0_IFEM | HID0_ABE )
 
-#define CFG_HID2		0
+#define CONFIG_SYS_HID2		0
 
-#define CFG_SYPCR		0xFFFFFFC3
-#define CFG_BCR			0x100C0000
-#define CFG_SIUMCR		0x0A200000
-#define CFG_SCCR		SCCR_DFBRG01
-#define CFG_BR0_PRELIM		(CFG_FLASH_BASE | 0x00001801)
-#define CFG_OR0_PRELIM		0xFF800876
-#define CFG_BR1_PRELIM		(CFG_BCSR | 0x00001801)
-#define CFG_OR1_PRELIM		0xFFFF8010
+#define CONFIG_SYS_SYPCR		0xFFFFFFC3
+#define CONFIG_SYS_BCR			0x100C0000
+#define CONFIG_SYS_SIUMCR		0x0A200000
+#define CONFIG_SYS_SCCR		SCCR_DFBRG01
+#define CONFIG_SYS_BR0_PRELIM		(CONFIG_SYS_FLASH_BASE | 0x00001801)
+#define CONFIG_SYS_OR0_PRELIM		0xFF800876
+#define CONFIG_SYS_BR1_PRELIM		(CONFIG_SYS_BCSR | 0x00001801)
+#define CONFIG_SYS_OR1_PRELIM		0xFFFF8010
 
 /*We need to configure chip select to use CPLD PCI IC on MPC8272ADS*/
 
-#if CONFIG_ADSTYPE == CFG_8272ADS
-#define CFG_BR3_PRELIM	(CFG_PCI_INT | 0x1801)	/* PCI interrupt controller */
-#define CFG_OR3_PRELIM	0xFFFF8010
+#if CONFIG_ADSTYPE == CONFIG_SYS_8272ADS
+#define CONFIG_SYS_BR3_PRELIM	(CONFIG_SYS_PCI_INT | 0x1801)	/* PCI interrupt controller */
+#define CONFIG_SYS_OR3_PRELIM	0xFFFF8010
 #endif
 
-#define CFG_RMR			RMR_CSRE
-#define CFG_TMCNTSC		(TMCNTSC_SEC|TMCNTSC_ALR|TMCNTSC_TCF|TMCNTSC_TCE)
-#define CFG_PISCR		(PISCR_PS|PISCR_PTF|PISCR_PTE)
-#define CFG_RCCR		0
-
-#if (CONFIG_ADSTYPE == CFG_8266ADS) || (CONFIG_ADSTYPE == CFG_8272ADS)
-#undef CFG_LSDRAM_BASE		/* No local bus SDRAM on these boards */
-#endif /* CONFIG_ADSTYPE == CFG_8266ADS */
-
-#if CONFIG_ADSTYPE == CFG_PQ2FADS
-#define CFG_OR2			0xFE002EC0
-#define CFG_PSDMR		0x824B36A3
-#define CFG_PSRT		0x13
-#define CFG_LSDMR		0x828737A3
-#define CFG_LSRT		0x13
-#define CFG_MPTPR		0x2800
-#elif CONFIG_ADSTYPE == CFG_8272ADS
-#define CFG_OR2			0xFC002CC0
-#define CFG_PSDMR		0x834E24A3
-#define CFG_PSRT		0x13
-#define CFG_MPTPR		0x2800
+#define CONFIG_SYS_RMR			RMR_CSRE
+#define CONFIG_SYS_TMCNTSC		(TMCNTSC_SEC|TMCNTSC_ALR|TMCNTSC_TCF|TMCNTSC_TCE)
+#define CONFIG_SYS_PISCR		(PISCR_PS|PISCR_PTF|PISCR_PTE)
+#define CONFIG_SYS_RCCR		0
+
+#if (CONFIG_ADSTYPE == CONFIG_SYS_8266ADS) || (CONFIG_ADSTYPE == CONFIG_SYS_8272ADS)
+#undef CONFIG_SYS_LSDRAM_BASE		/* No local bus SDRAM on these boards */
+#endif /* CONFIG_ADSTYPE == CONFIG_SYS_8266ADS */
+
+#if CONFIG_ADSTYPE == CONFIG_SYS_PQ2FADS
+#define CONFIG_SYS_OR2			0xFE002EC0
+#define CONFIG_SYS_PSDMR		0x824B36A3
+#define CONFIG_SYS_PSRT		0x13
+#define CONFIG_SYS_LSDMR		0x828737A3
+#define CONFIG_SYS_LSRT		0x13
+#define CONFIG_SYS_MPTPR		0x2800
+#elif CONFIG_ADSTYPE == CONFIG_SYS_8272ADS
+#define CONFIG_SYS_OR2			0xFC002CC0
+#define CONFIG_SYS_PSDMR		0x834E24A3
+#define CONFIG_SYS_PSRT		0x13
+#define CONFIG_SYS_MPTPR		0x2800
 #else
-#define CFG_OR2			0xFF000CA0
-#define CFG_PSDMR		0x016EB452
-#define CFG_PSRT		0x21
-#define CFG_LSDMR		0x0086A522
-#define CFG_LSRT		0x21
-#define CFG_MPTPR		0x1900
-#endif /* CONFIG_ADSTYPE == CFG_PQ2FADS */
+#define CONFIG_SYS_OR2			0xFF000CA0
+#define CONFIG_SYS_PSDMR		0x016EB452
+#define CONFIG_SYS_PSRT		0x21
+#define CONFIG_SYS_LSDMR		0x0086A522
+#define CONFIG_SYS_LSRT		0x21
+#define CONFIG_SYS_MPTPR		0x1900
+#endif /* CONFIG_ADSTYPE == CONFIG_SYS_PQ2FADS */
 
-#define CFG_RESET_ADDRESS	0x04400000
+#define CONFIG_SYS_RESET_ADDRESS	0x04400000
 
-#if CONFIG_ADSTYPE == CFG_8272ADS
+#if CONFIG_ADSTYPE == CONFIG_SYS_8272ADS
 
 /* PCI Memory map (if different from default map */
-#define CFG_PCI_SLV_MEM_LOCAL	CFG_SDRAM_BASE		/* Local base */
-#define CFG_PCI_SLV_MEM_BUS		0x00000000		/* PCI base */
-#define CFG_PICMR0_MASK_ATTRIB	(PICMR_MASK_512MB | PICMR_ENABLE | \
+#define CONFIG_SYS_PCI_SLV_MEM_LOCAL	CONFIG_SYS_SDRAM_BASE		/* Local base */
+#define CONFIG_SYS_PCI_SLV_MEM_BUS		0x00000000		/* PCI base */
+#define CONFIG_SYS_PICMR0_MASK_ATTRIB	(PICMR_MASK_512MB | PICMR_ENABLE | \
 				 PICMR_PREFETCH_EN)
 
 /*
@@ -468,11 +468,11 @@
  * in the bridge.
  */
 
-#define CFG_PCI_MSTR_MEM_LOCAL	0x80000000          /* Local base */
-#define CFG_PCI_MSTR_MEM_BUS	0x80000000          /* PCI base   */
-#define	CFG_CPU_PCI_MEM_START	PCI_MSTR_MEM_LOCAL
-#define CFG_PCI_MSTR_MEM_SIZE	0x20000000          /* 512MB */
-#define CFG_POCMR0_MASK_ATTRIB	(POCMR_MASK_512MB | POCMR_ENABLE | POCMR_PREFETCH_EN)
+#define CONFIG_SYS_PCI_MSTR_MEM_LOCAL	0x80000000          /* Local base */
+#define CONFIG_SYS_PCI_MSTR_MEM_BUS	0x80000000          /* PCI base   */
+#define	CONFIG_SYS_CPU_PCI_MEM_START	PCI_MSTR_MEM_LOCAL
+#define CONFIG_SYS_PCI_MSTR_MEM_SIZE	0x20000000          /* 512MB */
+#define CONFIG_SYS_POCMR0_MASK_ATTRIB	(POCMR_MASK_512MB | POCMR_ENABLE | POCMR_PREFETCH_EN)
 
 /*
  * Master window that allows the CPU to access PCI Memory (non-prefetch).
@@ -480,11 +480,11 @@
  * in the bridge.
  */
 
-#define CFG_PCI_MSTR_MEMIO_LOCAL    0xA0000000          /* Local base */
-#define CFG_PCI_MSTR_MEMIO_BUS      0xA0000000          /* PCI base   */
-#define CFG_CPU_PCI_MEMIO_START     PCI_MSTR_MEMIO_LOCAL
-#define CFG_PCI_MSTR_MEMIO_SIZE     0x20000000          /* 512MB */
-#define CFG_POCMR1_MASK_ATTRIB      (POCMR_MASK_512MB | POCMR_ENABLE)
+#define CONFIG_SYS_PCI_MSTR_MEMIO_LOCAL    0xA0000000          /* Local base */
+#define CONFIG_SYS_PCI_MSTR_MEMIO_BUS      0xA0000000          /* PCI base   */
+#define CONFIG_SYS_CPU_PCI_MEMIO_START     PCI_MSTR_MEMIO_LOCAL
+#define CONFIG_SYS_PCI_MSTR_MEMIO_SIZE     0x20000000          /* 512MB */
+#define CONFIG_SYS_POCMR1_MASK_ATTRIB      (POCMR_MASK_512MB | POCMR_ENABLE)
 
 /*
  * Master window that allows the CPU to access PCI IO space.
@@ -492,23 +492,23 @@
  * in the bridge.
  */
 
-#define CFG_PCI_MSTR_IO_LOCAL       0xF6000000          /* Local base */
-#define CFG_PCI_MSTR_IO_BUS         0x00000000          /* PCI base   */
-#define CFG_CPU_PCI_IO_START        PCI_MSTR_IO_LOCAL
-#define CFG_PCI_MSTR_IO_SIZE        0x02000000          /* 64MB */
-#define CFG_POCMR2_MASK_ATTRIB      (POCMR_MASK_32MB | POCMR_ENABLE | POCMR_PCI_IO)
+#define CONFIG_SYS_PCI_MSTR_IO_LOCAL       0xF6000000          /* Local base */
+#define CONFIG_SYS_PCI_MSTR_IO_BUS         0x00000000          /* PCI base   */
+#define CONFIG_SYS_CPU_PCI_IO_START        PCI_MSTR_IO_LOCAL
+#define CONFIG_SYS_PCI_MSTR_IO_SIZE        0x02000000          /* 64MB */
+#define CONFIG_SYS_POCMR2_MASK_ATTRIB      (POCMR_MASK_32MB | POCMR_ENABLE | POCMR_PCI_IO)
 
 
 /* PCIBR0 - for PCI IO*/
-#define CFG_PCI_MSTR0_LOCAL		CFG_PCI_MSTR_IO_LOCAL		/* Local base */
-#define CFG_PCIMSK0_MASK		~(CFG_PCI_MSTR_IO_SIZE - 1U)	/* Size of window */
+#define CONFIG_SYS_PCI_MSTR0_LOCAL		CONFIG_SYS_PCI_MSTR_IO_LOCAL		/* Local base */
+#define CONFIG_SYS_PCIMSK0_MASK		~(CONFIG_SYS_PCI_MSTR_IO_SIZE - 1U)	/* Size of window */
 /* PCIBR1 - prefetch and non-prefetch regions joined together */
-#define CFG_PCI_MSTR1_LOCAL		CFG_PCI_MSTR_MEM_LOCAL
-#define CFG_PCIMSK1_MASK		~(CFG_PCI_MSTR_MEM_SIZE + CFG_PCI_MSTR_MEMIO_SIZE - 1U)
+#define CONFIG_SYS_PCI_MSTR1_LOCAL		CONFIG_SYS_PCI_MSTR_MEM_LOCAL
+#define CONFIG_SYS_PCIMSK1_MASK		~(CONFIG_SYS_PCI_MSTR_MEM_SIZE + CONFIG_SYS_PCI_MSTR_MEMIO_SIZE - 1U)
 
 #endif /* CONFIG_ADSTYPE == CONFIG_8272ADS*/
 
-#if CONFIG_ADSTYPE == CFG_8272ADS
+#if CONFIG_ADSTYPE == CONFIG_SYS_8272ADS
 #define CONFIG_HAS_ETH1
 #endif
 
diff --git a/include/configs/MPC8266ADS.h b/include/configs/MPC8266ADS.h
index 3659002d5..fe1cc1796 100644
--- a/include/configs/MPC8266ADS.h
+++ b/include/configs/MPC8266ADS.h
@@ -36,7 +36,7 @@
    !!  To make it work for the default, the TEXT_BASE define in	      !!
    !!  board/mpc8266ads/config.mk must be changed from 0xfe000000 to  !!
    !!  0xfff00000						      !!
-   !!  The CFG_HRCW_MASTER define below must also be changed to match !!
+   !!  The CONFIG_SYS_HRCW_MASTER define below must also be changed to match !!
    !!								      !!
    !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
  */
@@ -115,18 +115,18 @@
  * - Select bus for bd/buffers (see 28-13)
  * - Half duplex
  */
-# define CFG_CMXFCR_MASK	(CMXFCR_FC2 | CMXFCR_RF2CS_MSK | CMXFCR_TF2CS_MSK)
-# define CFG_CMXFCR_VALUE	(CMXFCR_RF2CS_CLK13 | CMXFCR_TF2CS_CLK14)
-# define CFG_CPMFCR_RAMTYPE	0
-# define CFG_FCC_PSMR		(FCC_PSMR_FDE | FCC_PSMR_LPB)
+# define CONFIG_SYS_CMXFCR_MASK	(CMXFCR_FC2 | CMXFCR_RF2CS_MSK | CMXFCR_TF2CS_MSK)
+# define CONFIG_SYS_CMXFCR_VALUE	(CMXFCR_RF2CS_CLK13 | CMXFCR_TF2CS_CLK14)
+# define CONFIG_SYS_CPMFCR_RAMTYPE	0
+# define CONFIG_SYS_FCC_PSMR		(FCC_PSMR_FDE | FCC_PSMR_LPB)
 
 #endif	/* CONFIG_ETHER_INDEX */
 
 /* other options */
 #define CONFIG_HARD_I2C		1	/* To enable I2C support	*/
-#define CFG_I2C_SPEED		400000	/* I2C speed and slave address	*/
-#define CFG_I2C_SLAVE		0x7F
-#define CFG_I2C_EEPROM_ADDR_LEN 1
+#define CONFIG_SYS_I2C_SPEED		400000	/* I2C speed and slave address	*/
+#define CONFIG_SYS_I2C_SLAVE		0x7F
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
 
 /* PCI */
 #define CONFIG_PCI
@@ -218,47 +218,47 @@
 /*
  * Miscellaneous configurable options
  */
-#define CFG_LONGHELP			/* undef to save memory	    */
-#define CFG_PROMPT	"=> "		/* Monitor Command Prompt   */
+#define CONFIG_SYS_LONGHELP			/* undef to save memory	    */
+#define CONFIG_SYS_PROMPT	"=> "		/* Monitor Command Prompt   */
 #if defined(CONFIG_CMD_KGDB)
-#define CFG_CBSIZE	1024		/* Console I/O Buffer Size  */
+#define CONFIG_SYS_CBSIZE	1024		/* Console I/O Buffer Size  */
 #else
-#define CFG_CBSIZE	256			/* Console I/O Buffer Size  */
+#define CONFIG_SYS_CBSIZE	256			/* Console I/O Buffer Size  */
 #endif
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16)	/* Print Buffer Size */
-#define CFG_MAXARGS	16			/* max number of command args	*/
-#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)	/* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS	16			/* max number of command args	*/
+#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
 
-#define CFG_MEMTEST_START	0x00100000	/* memtest works on */
-#define CFG_MEMTEST_END		0x00f00000	/* 1 ... 15 MB in DRAM	*/
+#define CONFIG_SYS_MEMTEST_START	0x00100000	/* memtest works on */
+#define CONFIG_SYS_MEMTEST_END		0x00f00000	/* 1 ... 15 MB in DRAM	*/
 
 #undef CONFIG_CLOCKS_IN_MHZ		/* clocks passsed to Linux in MHz */
 					/* for versions < 2.4.5-pre5	*/
 
-#define CFG_LOAD_ADDR		0x100000	/* default load address */
+#define CONFIG_SYS_LOAD_ADDR		0x100000	/* default load address */
 
-#define CFG_HZ			1000	/* decrementer freq: 1 ms ticks */
+#define CONFIG_SYS_HZ			1000	/* decrementer freq: 1 ms ticks */
 
-#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
 
-#define CFG_FLASH_BASE		0xFE000000
+#define CONFIG_SYS_FLASH_BASE		0xFE000000
 #define FLASH_BASE		0xFE000000
-#define CFG_MAX_FLASH_BANKS	1	/* max num of memory banks	*/
-#define CFG_MAX_FLASH_SECT	32	/* max num of sects on one chip */
-#define CFG_FLASH_SIZE		8
-#define CFG_FLASH_ERASE_TOUT	8000	/* Timeout for Flash Erase (in ms)    */
-#define CFG_FLASH_WRITE_TOUT	5	/* Timeout for Flash Write (in ms)    */
+#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max num of memory banks	*/
+#define CONFIG_SYS_MAX_FLASH_SECT	32	/* max num of sects on one chip */
+#define CONFIG_SYS_FLASH_SIZE		8
+#define CONFIG_SYS_FLASH_ERASE_TOUT	8000	/* Timeout for Flash Erase (in ms)    */
+#define CONFIG_SYS_FLASH_WRITE_TOUT	5	/* Timeout for Flash Write (in ms)    */
 
-#undef	CFG_FLASH_CHECKSUM
+#undef	CONFIG_SYS_FLASH_CHECKSUM
 
 /* this is stuff came out of the Motorola docs */
 /* Only change this if you also change the Hardware configuration Word */
-#define CFG_DEFAULT_IMMR	0x0F010000
+#define CONFIG_SYS_DEFAULT_IMMR	0x0F010000
 
 /* Set IMMR to 0xF0000000 or above to boot Linux  */
-#define CFG_IMMR		0xF0000000
-#define CFG_BCSR		0xF8000000
-#define CFG_PCI_INT		0xF8200000	/* PCI interrupt controller */
+#define CONFIG_SYS_IMMR		0xF0000000
+#define CONFIG_SYS_BCSR		0xF8000000
+#define CONFIG_SYS_PCI_INT		0xF8200000	/* PCI interrupt controller */
 
 /* Define CONFIG_VERY_BIG_RAM to allow use of SDRAMs larger than 256MBytes
  */
@@ -267,8 +267,8 @@
 /* What should be the base address of SDRAM DIMM and how big is
  * it (in Mbytes)?  This will normally auto-configure via the SPD.
 */
-#define CFG_SDRAM_BASE 0x00000000
-#define CFG_SDRAM_SIZE 16
+#define CONFIG_SYS_SDRAM_BASE 0x00000000
+#define CONFIG_SYS_SDRAM_SIZE 16
 
 #define SDRAM_SPD_ADDR 0x50
 
@@ -295,12 +295,12 @@
  *     - No data pipelining is done
  *     - Valid
  */
-#define CFG_BR2_PRELIM	((CFG_SDRAM_BASE & BRx_BA_MSK) |\
+#define CONFIG_SYS_BR2_PRELIM	((CONFIG_SYS_SDRAM_BASE & BRx_BA_MSK) |\
 			 BRx_PS_64			|\
 			 BRx_MS_SDRAM_P			|\
 			 BRx_V)
 
-#define CFG_BR3_PRELIM	((CFG_SDRAM_BASE & BRx_BA_MSK) |\
+#define CONFIG_SYS_BR3_PRELIM	((CONFIG_SYS_SDRAM_BASE & BRx_BA_MSK) |\
 			 BRx_PS_64			|\
 			 BRx_MS_SDRAM_P			|\
 			 BRx_V)
@@ -314,13 +314,13 @@
  *     - Back-to-back page mode
  *     - Internal bank interleaving within save device enabled
  */
-#if (CFG_SDRAM_SIZE == 64)
-#define CFG_OR2_PRELIM	(MEG_TO_AM(CFG_SDRAM_SIZE)	|\
+#if (CONFIG_SYS_SDRAM_SIZE == 64)
+#define CONFIG_SYS_OR2_PRELIM	(MEG_TO_AM(CONFIG_SYS_SDRAM_SIZE)	|\
 			 ORxS_BPD_4			|\
 			 ORxS_ROWST_PBI0_A8		|\
 			 ORxS_NUMR_12)
-#elif (CFG_SDRAM_SIZE == 16)
-#define CFG_OR2_PRELIM	(0xFF000C80)
+#elif (CONFIG_SYS_SDRAM_SIZE == 16)
+#define CONFIG_SYS_OR2_PRELIM	(0xFF000C80)
 #else
 #error "INVALID SDRAM CONFIGURATION"
 #endif
@@ -331,7 +331,7 @@
  *-----------------------------------------------------------------------
  */
 
-#if (CFG_SDRAM_SIZE == 64)
+#if (CONFIG_SYS_SDRAM_SIZE == 64)
 /* With a 64 MB DIMM, the PSDMR is configured as follows:
  *
  *     - Bank Based Interleaving,
@@ -349,7 +349,7 @@
  *     - earliest timing for PRECHARGE after last data was written is 1 clock,
  *     - CAS Latency is 2.
  */
-#define CFG_PSDMR	(PSDMR_RFEN	      |\
+#define CONFIG_SYS_PSDMR	(PSDMR_RFEN	      |\
 			 PSDMR_SDAM_A14_IS_A5 |\
 			 PSDMR_BSMA_A14_A16   |\
 			 PSDMR_SDA10_PBI0_A9  |\
@@ -359,12 +359,12 @@
 			 PSDMR_LDOTOPRE_1C    |\
 			 PSDMR_WRC_1C	      |\
 			 PSDMR_CL_2)
-#elif (CFG_SDRAM_SIZE == 16)
+#elif (CONFIG_SYS_SDRAM_SIZE == 16)
 /* With a 16 MB DIMM, the PSDMR is configured as follows:
  *
  *   configuration parameters found in Motorola documentation
  */
-#define CFG_PSDMR	(0x016EB452)
+#define CONFIG_SYS_PSDMR	(0x016EB452)
 #else
 #error "INVALID SDRAM CONFIGURATION"
 #endif
@@ -374,22 +374,22 @@
 #define FETHIEN			0x08000008
 #define FETH_RST		0x04000004
 
-#define CFG_INIT_RAM_ADDR	CFG_IMMR
-#define CFG_INIT_RAM_END	0x4000	/* End of used area in DPRAM	*/
-#define CFG_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_IMMR
+#define CONFIG_SYS_INIT_RAM_END	0x4000	/* End of used area in DPRAM	*/
+#define CONFIG_SYS_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
 /* Use this HRCW for booting from address 0xfe00000 (JP3 in setting 1-2)  */
 /* 0x0EB2B645 */
-#define CFG_HRCW_MASTER (( HRCW_BPS11 | HRCW_CIP )				|\
+#define CONFIG_SYS_HRCW_MASTER (( HRCW_BPS11 | HRCW_CIP )				|\
 			 ( HRCW_L2CPC10 | HRCW_DPPC11 | HRCW_ISB010 )		|\
 			 ( HRCW_BMS | HRCW_MMR11 | HRCW_LBPC01 | HRCW_APPC10 )	|\
 			 ( HRCW_CS10PC01 | HRCW_MODCK_H0101 )			\
 			)
 
 /* Use this HRCW for booting from address 0xfff0000 (JP3 in setting 2-3)  */
-/* #define CFG_HRCW_MASTER 0x0cb23645 */
+/* #define CONFIG_SYS_HRCW_MASTER 0x0cb23645 */
 
 /* This value should actually be situated in the first 256 bytes of the FLASH
 	which on the standard MPC8266ADS board is at address 0xFF800000
@@ -406,39 +406,39 @@
 */
 
 /* no slaves */
-#define CFG_HRCW_SLAVE1 0
-#define CFG_HRCW_SLAVE2 0
-#define CFG_HRCW_SLAVE3 0
-#define CFG_HRCW_SLAVE4 0
-#define CFG_HRCW_SLAVE5 0
-#define CFG_HRCW_SLAVE6 0
-#define CFG_HRCW_SLAVE7 0
+#define CONFIG_SYS_HRCW_SLAVE1 0
+#define CONFIG_SYS_HRCW_SLAVE2 0
+#define CONFIG_SYS_HRCW_SLAVE3 0
+#define CONFIG_SYS_HRCW_SLAVE4 0
+#define CONFIG_SYS_HRCW_SLAVE5 0
+#define CONFIG_SYS_HRCW_SLAVE6 0
+#define CONFIG_SYS_HRCW_SLAVE7 0
 
 #define BOOTFLAG_COLD	0x01	/* Normal Power-On: Boot from FLASH  */
 #define BOOTFLAG_WARM	0x02	/* Software reboot	     */
 
-#define CFG_MONITOR_BASE    TEXT_BASE
-#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
-#   define CFG_RAMBOOT
+#define CONFIG_SYS_MONITOR_BASE    TEXT_BASE
+#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
+#   define CONFIG_SYS_RAMBOOT
 #endif
 
-#define CFG_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor	*/
-#define CFG_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/
-#define CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
+#define CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor	*/
+#define CONFIG_SYS_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/
+#define CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
 
-#ifndef CFG_RAMBOOT
-#  define CFG_ENV_IS_IN_FLASH	1
-#    define CFG_ENV_ADDR	(CFG_MONITOR_BASE + 0x40000)
-#    define CFG_ENV_SECT_SIZE	0x40000
+#ifndef CONFIG_SYS_RAMBOOT
+#  define CONFIG_ENV_IS_IN_FLASH	1
+#    define CONFIG_ENV_ADDR	(CONFIG_SYS_MONITOR_BASE + 0x40000)
+#    define CONFIG_ENV_SECT_SIZE	0x40000
 #else
-#  define CFG_ENV_IS_IN_NVRAM	1
-#  define CFG_ENV_ADDR		(CFG_MONITOR_BASE - 0x1000)
-#  define CFG_ENV_SIZE		0x200
-#endif /* CFG_RAMBOOT */
+#  define CONFIG_ENV_IS_IN_NVRAM	1
+#  define CONFIG_ENV_ADDR		(CONFIG_SYS_MONITOR_BASE - 0x1000)
+#  define CONFIG_ENV_SIZE		0x200
+#endif /* CONFIG_SYS_RAMBOOT */
 
-#define CFG_CACHELINE_SIZE	32	/* For MPC8260 CPU */
+#define CONFIG_SYS_CACHELINE_SIZE	32	/* For MPC8260 CPU */
 #if defined(CONFIG_CMD_KGDB)
-#  define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value */
+#  define CONFIG_SYS_CACHELINE_SHIFT	5	/* log base 2 of the above value */
 #endif
 
 /*-----------------------------------------------------------------------
@@ -451,22 +451,22 @@
  *
  * HID1 has only read-only information - nothing to set.
  */
-/*#define CFG_HID0_INIT		0 */
-#define CFG_HID0_INIT	(HID0_ICE  |\
+/*#define CONFIG_SYS_HID0_INIT		0 */
+#define CONFIG_SYS_HID0_INIT	(HID0_ICE  |\
 			 HID0_DCE  |\
 			 HID0_ICFI |\
 			 HID0_DCI  |\
 			 HID0_IFEM |\
 			 HID0_ABE)
 
-#define CFG_HID0_FINAL		(HID0_ICE | HID0_IFEM | HID0_ABE )
+#define CONFIG_SYS_HID0_FINAL		(HID0_ICE | HID0_IFEM | HID0_ABE )
 
-#define CFG_HID2		0
+#define CONFIG_SYS_HID2		0
 
-#define CFG_SYPCR		0xFFFFFFC3
-#define CFG_BCR			0x004C0000
-#define CFG_SIUMCR		0x4E64C000
-#define CFG_SCCR		0x00000000
+#define CONFIG_SYS_SYPCR		0xFFFFFFC3
+#define CONFIG_SYS_BCR			0x004C0000
+#define CONFIG_SYS_SIUMCR		0x4E64C000
+#define CONFIG_SYS_SCCR		0x00000000
 
 /*	local bus memory map
  *
@@ -481,31 +481,31 @@
  *	0xF8300000-0xF8307FFF	 32KB	EEPROM
  *	0xFE000000-0xFFFFFFFF	 32MB	flash
  */
-#define CFG_BR0_PRELIM	0xFE001801		/* flash */
-#define CFG_OR0_PRELIM	0xFE000836
-#define CFG_BR1_PRELIM	(CFG_BCSR | 0x1801)	/* BCSR */
-#define CFG_OR1_PRELIM	0xFFFF8010
-#define CFG_BR4_PRELIM	0xF8300801		/* EEPROM */
-#define CFG_OR4_PRELIM	0xFFFF8846
-#define CFG_BR5_PRELIM	0xF8100801		/* PM5350 ATM UNI */
-#define CFG_OR5_PRELIM	0xFFFF8E36
-#define CFG_BR8_PRELIM	(CFG_PCI_INT | 0x1801)	/* PCI interrupt controller */
-#define CFG_OR8_PRELIM	0xFFFF8010
-
-#define CFG_RMR			0x0001
-#define CFG_TMCNTSC		(TMCNTSC_SEC|TMCNTSC_ALR|TMCNTSC_TCF|TMCNTSC_TCE)
-#define CFG_PISCR		(PISCR_PS|PISCR_PTF|PISCR_PTE)
-#define CFG_RCCR		0
-#define CFG_MPTPR		0x00001900
-#define CFG_PSRT		0x00000021
+#define CONFIG_SYS_BR0_PRELIM	0xFE001801		/* flash */
+#define CONFIG_SYS_OR0_PRELIM	0xFE000836
+#define CONFIG_SYS_BR1_PRELIM	(CONFIG_SYS_BCSR | 0x1801)	/* BCSR */
+#define CONFIG_SYS_OR1_PRELIM	0xFFFF8010
+#define CONFIG_SYS_BR4_PRELIM	0xF8300801		/* EEPROM */
+#define CONFIG_SYS_OR4_PRELIM	0xFFFF8846
+#define CONFIG_SYS_BR5_PRELIM	0xF8100801		/* PM5350 ATM UNI */
+#define CONFIG_SYS_OR5_PRELIM	0xFFFF8E36
+#define CONFIG_SYS_BR8_PRELIM	(CONFIG_SYS_PCI_INT | 0x1801)	/* PCI interrupt controller */
+#define CONFIG_SYS_OR8_PRELIM	0xFFFF8010
+
+#define CONFIG_SYS_RMR			0x0001
+#define CONFIG_SYS_TMCNTSC		(TMCNTSC_SEC|TMCNTSC_ALR|TMCNTSC_TCF|TMCNTSC_TCE)
+#define CONFIG_SYS_PISCR		(PISCR_PS|PISCR_PTF|PISCR_PTE)
+#define CONFIG_SYS_RCCR		0
+#define CONFIG_SYS_MPTPR		0x00001900
+#define CONFIG_SYS_PSRT		0x00000021
 
 /* This address must not exist */
-#define CFG_RESET_ADDRESS	0xFCFFFF00
+#define CONFIG_SYS_RESET_ADDRESS	0xFCFFFF00
 
 /* PCI Memory map (if different from default map */
-#define CFG_PCI_SLV_MEM_LOCAL	CFG_SDRAM_BASE		/* Local base */
-#define CFG_PCI_SLV_MEM_BUS		0x00000000		/* PCI base */
-#define CFG_PICMR0_MASK_ATTRIB	(PICMR_MASK_512MB | PICMR_ENABLE | \
+#define CONFIG_SYS_PCI_SLV_MEM_LOCAL	CONFIG_SYS_SDRAM_BASE		/* Local base */
+#define CONFIG_SYS_PCI_SLV_MEM_BUS		0x00000000		/* PCI base */
+#define CONFIG_SYS_PICMR0_MASK_ATTRIB	(PICMR_MASK_512MB | PICMR_ENABLE | \
 				 PICMR_PREFETCH_EN)
 
 /*
@@ -516,11 +516,11 @@
  */
 
 /* PCIBR0 */
-#define CFG_PCI_MSTR0_LOCAL		0x80000000		/* Local base */
-#define CFG_PCIMSK0_MASK		PCIMSK_1GB		/* Size of window */
+#define CONFIG_SYS_PCI_MSTR0_LOCAL		0x80000000		/* Local base */
+#define CONFIG_SYS_PCIMSK0_MASK		PCIMSK_1GB		/* Size of window */
 /* PCIBR1 */
-#define CFG_PCI_MSTR1_LOCAL		0xF4000000		/* Local base */
-#define CFG_PCIMSK1_MASK		PCIMSK_64MB		/* Size of window */
+#define CONFIG_SYS_PCI_MSTR1_LOCAL		0xF4000000		/* Local base */
+#define CONFIG_SYS_PCIMSK1_MASK		PCIMSK_64MB		/* Size of window */
 
 /*
  * Master window that allows the CPU to access PCI Memory (prefetch).
@@ -528,11 +528,11 @@
  * in the bridge.
  */
 
-#define CFG_PCI_MSTR_MEM_LOCAL	0x80000000			/* Local base */
-#define CFG_PCI_MSTR_MEM_BUS	0x80000000			/* PCI base   */
-#define CFG_CPU_PCI_MEM_START	PCI_MSTR_MEM_LOCAL
-#define CFG_PCI_MSTR_MEM_SIZE	0x20000000			/* 512MB */
-#define CFG_POCMR0_MASK_ATTRIB	(POCMR_MASK_512MB | POCMR_ENABLE | POCMR_PREFETCH_EN)
+#define CONFIG_SYS_PCI_MSTR_MEM_LOCAL	0x80000000			/* Local base */
+#define CONFIG_SYS_PCI_MSTR_MEM_BUS	0x80000000			/* PCI base   */
+#define CONFIG_SYS_CPU_PCI_MEM_START	PCI_MSTR_MEM_LOCAL
+#define CONFIG_SYS_PCI_MSTR_MEM_SIZE	0x20000000			/* 512MB */
+#define CONFIG_SYS_POCMR0_MASK_ATTRIB	(POCMR_MASK_512MB | POCMR_ENABLE | POCMR_PREFETCH_EN)
 
 /*
  * Master window that allows the CPU to access PCI Memory (non-prefetch).
@@ -540,11 +540,11 @@
  * in the bridge.
  */
 
-#define CFG_PCI_MSTR_MEMIO_LOCAL    0xA0000000			/* Local base */
-#define CFG_PCI_MSTR_MEMIO_BUS	    0xA0000000			/* PCI base   */
-#define CFG_CPU_PCI_MEMIO_START	    PCI_MSTR_MEMIO_LOCAL
-#define CFG_PCI_MSTR_MEMIO_SIZE	    0x20000000			/* 512MB */
-#define CFG_POCMR1_MASK_ATTRIB	    (POCMR_MASK_512MB | POCMR_ENABLE)
+#define CONFIG_SYS_PCI_MSTR_MEMIO_LOCAL    0xA0000000			/* Local base */
+#define CONFIG_SYS_PCI_MSTR_MEMIO_BUS	    0xA0000000			/* PCI base   */
+#define CONFIG_SYS_CPU_PCI_MEMIO_START	    PCI_MSTR_MEMIO_LOCAL
+#define CONFIG_SYS_PCI_MSTR_MEMIO_SIZE	    0x20000000			/* 512MB */
+#define CONFIG_SYS_POCMR1_MASK_ATTRIB	    (POCMR_MASK_512MB | POCMR_ENABLE)
 
 /*
  * Master window that allows the CPU to access PCI IO space.
@@ -552,11 +552,11 @@
  * in the bridge.
  */
 
-#define CFG_PCI_MSTR_IO_LOCAL	    0xF4000000			/* Local base */
-#define CFG_PCI_MSTR_IO_BUS	    0xF4000000			/* PCI base   */
-#define CFG_CPU_PCI_IO_START	    PCI_MSTR_IO_LOCAL
-#define CFG_PCI_MSTR_IO_SIZE	    0x04000000			/* 64MB */
-#define CFG_POCMR2_MASK_ATTRIB	    (POCMR_MASK_64MB | POCMR_ENABLE | POCMR_PCI_IO)
+#define CONFIG_SYS_PCI_MSTR_IO_LOCAL	    0xF4000000			/* Local base */
+#define CONFIG_SYS_PCI_MSTR_IO_BUS	    0xF4000000			/* PCI base   */
+#define CONFIG_SYS_CPU_PCI_IO_START	    PCI_MSTR_IO_LOCAL
+#define CONFIG_SYS_PCI_MSTR_IO_SIZE	    0x04000000			/* 64MB */
+#define CONFIG_SYS_POCMR2_MASK_ATTRIB	    (POCMR_MASK_64MB | POCMR_ENABLE | POCMR_PCI_IO)
 
 /*
  * JFFS2 partitions
diff --git a/include/configs/MPC8313ERDB.h b/include/configs/MPC8313ERDB.h
index 95ba84029..fc3fa13c7 100644
--- a/include/configs/MPC8313ERDB.h
+++ b/include/configs/MPC8313ERDB.h
@@ -49,9 +49,9 @@
 #define CONFIG_VSC7385_ENET
 #define CONFIG_TSEC2
 
-#ifdef CFG_66MHZ
+#ifdef CONFIG_SYS_66MHZ
 #define CONFIG_83XX_CLKIN	66666667	/* in Hz */
-#elif defined(CFG_33MHZ)
+#elif defined(CONFIG_SYS_33MHZ)
 #define CONFIG_83XX_CLKIN	33333333	/* in Hz */
 #else
 #error Unknown oscillator frequency.
@@ -61,23 +61,23 @@
 
 #define CONFIG_BOARD_EARLY_INIT_F		/* call board_pre_init */
 
-#define CFG_IMMR		0xE0000000
+#define CONFIG_SYS_IMMR		0xE0000000
 
 #if defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL)
-#define CONFIG_DEFAULT_IMMR	CFG_IMMR
+#define CONFIG_DEFAULT_IMMR	CONFIG_SYS_IMMR
 #endif
 
-#define CFG_MEMTEST_START	0x00001000
-#define CFG_MEMTEST_END		0x07f00000
+#define CONFIG_SYS_MEMTEST_START	0x00001000
+#define CONFIG_SYS_MEMTEST_END		0x07f00000
 
 /* Early revs of this board will lock up hard when attempting
  * to access the PMC registers, unless a JTAG debugger is
  * connected, or some resistor modifications are made.
  */
-#define CFG_8313ERDB_BROKEN_PMC 1
+#define CONFIG_SYS_8313ERDB_BROKEN_PMC 1
 
-#define CFG_ACR_PIPE_DEP	3	/* Arbiter pipeline depth (0-3) */
-#define CFG_ACR_RPTCNT		3	/* Arbiter repeat count (0-7) */
+#define CONFIG_SYS_ACR_PIPE_DEP	3	/* Arbiter pipeline depth (0-3) */
+#define CONFIG_SYS_ACR_RPTCNT		3	/* Arbiter repeat count (0-7) */
 
 /*
  * Device configurations
@@ -98,22 +98,22 @@
 /*
  * DDR Setup
  */
-#define CFG_DDR_BASE		0x00000000	/* DDR is system memory*/
-#define CFG_SDRAM_BASE		CFG_DDR_BASE
-#define CFG_DDR_SDRAM_BASE	CFG_DDR_BASE
+#define CONFIG_SYS_DDR_BASE		0x00000000	/* DDR is system memory*/
+#define CONFIG_SYS_SDRAM_BASE		CONFIG_SYS_DDR_BASE
+#define CONFIG_SYS_DDR_SDRAM_BASE	CONFIG_SYS_DDR_BASE
 
 /*
  * Manually set up DDR parameters, as this board does not
  * seem to have the SPD connected to I2C.
  */
-#define CFG_DDR_SIZE		128		/* MB */
-#define CFG_DDR_CONFIG		( CSCONFIG_EN \
+#define CONFIG_SYS_DDR_SIZE		128		/* MB */
+#define CONFIG_SYS_DDR_CONFIG		( CSCONFIG_EN \
 				| 0x00010000 /* TODO */ \
 				| CSCONFIG_ROW_BIT_13 | CSCONFIG_COL_BIT_10 )
 				/* 0x80010102 */
 
-#define CFG_DDR_TIMING_3	0x00000000
-#define CFG_DDR_TIMING_0	( ( 0 << TIMING_CFG0_RWT_SHIFT ) \
+#define CONFIG_SYS_DDR_TIMING_3	0x00000000
+#define CONFIG_SYS_DDR_TIMING_0	( ( 0 << TIMING_CFG0_RWT_SHIFT ) \
 				| ( 0 << TIMING_CFG0_WRT_SHIFT ) \
 				| ( 0 << TIMING_CFG0_RRT_SHIFT ) \
 				| ( 0 << TIMING_CFG0_WWT_SHIFT ) \
@@ -122,7 +122,7 @@
 				| ( 8 << TIMING_CFG0_ODT_PD_EXIT_SHIFT ) \
 				| ( 2 << TIMING_CFG0_MRS_CYC_SHIFT ) )
 				/* 0x00220802 */
-#define CFG_DDR_TIMING_1	( ( 3 << TIMING_CFG1_PRETOACT_SHIFT ) \
+#define CONFIG_SYS_DDR_TIMING_1	( ( 3 << TIMING_CFG1_PRETOACT_SHIFT ) \
 				| ( 8 << TIMING_CFG1_ACTTOPRE_SHIFT ) \
 				| ( 3 << TIMING_CFG1_ACTTORW_SHIFT ) \
 				| ( 5 << TIMING_CFG1_CASLAT_SHIFT ) \
@@ -131,7 +131,7 @@
 				| ( 2 << TIMING_CFG1_ACTTOACT_SHIFT ) \
 				| ( 2 << TIMING_CFG1_WRTORD_SHIFT ) )
 				/* 0x3835a322 */
-#define CFG_DDR_TIMING_2	( ( 1 << TIMING_CFG2_ADD_LAT_SHIFT ) \
+#define CONFIG_SYS_DDR_TIMING_2	( ( 1 << TIMING_CFG2_ADD_LAT_SHIFT ) \
 				| ( 5 << TIMING_CFG2_CPO_SHIFT ) \
 				| ( 2 << TIMING_CFG2_WR_LAT_DELAY_SHIFT ) \
 				| ( 2 << TIMING_CFG2_RD_TO_PRE_SHIFT ) \
@@ -139,30 +139,30 @@
 				| ( 3 << TIMING_CFG2_CKE_PLS_SHIFT ) \
 				| ( 6 << TIMING_CFG2_FOUR_ACT_SHIFT) )
 				/* 0x129048c6 */ /* P9-45,may need tuning */
-#define CFG_DDR_INTERVAL	( ( 1296 << SDRAM_INTERVAL_REFINT_SHIFT ) \
+#define CONFIG_SYS_DDR_INTERVAL	( ( 1296 << SDRAM_INTERVAL_REFINT_SHIFT ) \
 				| ( 1280 << SDRAM_INTERVAL_BSTOPRE_SHIFT ) )
 				/* 0x05100500 */
 #if defined(CONFIG_DDR_2T_TIMING)
-#define CFG_SDRAM_CFG		( SDRAM_CFG_SREN \
+#define CONFIG_SYS_SDRAM_CFG		( SDRAM_CFG_SREN \
 				| SDRAM_CFG_SDRAM_TYPE_DDR2 \
 				| SDRAM_CFG_2T_EN \
 				| SDRAM_CFG_DBW_32 )
 #else
-#define CFG_SDRAM_CFG		( SDRAM_CFG_SREN \
+#define CONFIG_SYS_SDRAM_CFG		( SDRAM_CFG_SREN \
 				| SDRAM_CFG_SDRAM_TYPE_DDR2 \
 				| SDRAM_CFG_32_BE )
 				/* 0x43080000 */
 #endif
-#define CFG_SDRAM_CFG2		0x00401000;
+#define CONFIG_SYS_SDRAM_CFG2		0x00401000
 /* set burst length to 8 for 32-bit data path */
-#define CFG_DDR_MODE		( ( 0x4448 << SDRAM_MODE_ESD_SHIFT ) \
+#define CONFIG_SYS_DDR_MODE		( ( 0x4448 << SDRAM_MODE_ESD_SHIFT ) \
 				| ( 0x0632 << SDRAM_MODE_SD_SHIFT ) )
 				/* 0x44480632 */
-#define CFG_DDR_MODE_2		0x8000C000;
+#define CONFIG_SYS_DDR_MODE_2		0x8000C000
 
-#define CFG_DDR_CLK_CNTL	DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05
+#define CONFIG_SYS_DDR_CLK_CNTL	DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05
 				/*0x02000000*/
-#define CFG_DDRCDR_VALUE	( DDRCDR_EN \
+#define CONFIG_SYS_DDRCDR_VALUE	( DDRCDR_EN \
 				| DDRCDR_PZ_NOMZ \
 				| DDRCDR_NZ_NOMZ \
 				| DDRCDR_M_ODR )
@@ -170,85 +170,86 @@
 /*
  * FLASH on the Local Bus
  */
-#define CFG_FLASH_CFI				/* use the Common Flash Interface */
+#define CONFIG_SYS_FLASH_CFI				/* use the Common Flash Interface */
 #define CONFIG_FLASH_CFI_DRIVER			/* use the CFI driver */
-#define CFG_FLASH_BASE		0xFE000000	/* start of FLASH   */
-#define CFG_FLASH_SIZE		8		/* flash size in MB */
-#define CFG_FLASH_EMPTY_INFO			/* display empty sectors */
-#define CFG_FLASH_USE_BUFFER_WRITE		/* buffer up multiple bytes */
+#define CONFIG_SYS_FLASH_BASE		0xFE000000	/* start of FLASH   */
+#define CONFIG_SYS_FLASH_SIZE		8		/* flash size in MB */
+#define CONFIG_SYS_FLASH_PROTECTION	1		/* Use h/w Flash protection. */
+#define CONFIG_SYS_FLASH_EMPTY_INFO			/* display empty sectors */
+#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE		/* buffer up multiple bytes */
 
-#define CFG_NOR_BR_PRELIM	(CFG_FLASH_BASE |	/* flash Base address */ \
+#define CONFIG_SYS_NOR_BR_PRELIM	(CONFIG_SYS_FLASH_BASE |	/* flash Base address */ \
 				(2 << BR_PS_SHIFT) |	/* 16 bit port size */ \
 				BR_V)			/* valid */
-#define CFG_NOR_OR_PRELIM	( 0xFF800000		/* 8 MByte */ \
+#define CONFIG_SYS_NOR_OR_PRELIM	( 0xFF800000		/* 8 MByte */ \
 				| OR_GPCM_XACS \
 				| OR_GPCM_SCY_9 \
 				| OR_GPCM_EHTR \
 				| OR_GPCM_EAD )
 				/* 0xFF006FF7	TODO SLOW 16 MB flash size */
-#define CFG_LBLAWBAR0_PRELIM	CFG_FLASH_BASE	/* window base at flash base */
-#define CFG_LBLAWAR0_PRELIM	0x80000017	/* 16 MB window size */
+#define CONFIG_SYS_LBLAWBAR0_PRELIM	CONFIG_SYS_FLASH_BASE	/* window base at flash base */
+#define CONFIG_SYS_LBLAWAR0_PRELIM	0x80000017	/* 16 MB window size */
 
-#define CFG_MAX_FLASH_BANKS	1		/* number of banks */
-#define CFG_MAX_FLASH_SECT	135		/* sectors per device */
+#define CONFIG_SYS_MAX_FLASH_BANKS	1		/* number of banks */
+#define CONFIG_SYS_MAX_FLASH_SECT	135		/* sectors per device */
 
-#define CFG_FLASH_ERASE_TOUT	60000	/* Flash Erase Timeout (ms) */
-#define CFG_FLASH_WRITE_TOUT	500	/* Flash Write Timeout (ms) */
+#define CONFIG_SYS_FLASH_ERASE_TOUT	60000	/* Flash Erase Timeout (ms) */
+#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Flash Write Timeout (ms) */
 
-#define CFG_MONITOR_BASE	TEXT_BASE	/* start of monitor */
+#define CONFIG_SYS_MONITOR_BASE	TEXT_BASE	/* start of monitor */
 
-#if (CFG_MONITOR_BASE < CFG_FLASH_BASE) && !defined(CONFIG_NAND_SPL)
-#define CFG_RAMBOOT
+#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE) && !defined(CONFIG_NAND_SPL)
+#define CONFIG_SYS_RAMBOOT
 #endif
 
-#define CFG_INIT_RAM_LOCK	1
-#define CFG_INIT_RAM_ADDR	0xFD000000	/* Initial RAM address */
-#define CFG_INIT_RAM_END	0x1000		/* End of used area in RAM*/
+#define CONFIG_SYS_INIT_RAM_LOCK	1
+#define CONFIG_SYS_INIT_RAM_ADDR	0xFD000000	/* Initial RAM address */
+#define CONFIG_SYS_INIT_RAM_END	0x1000		/* End of used area in RAM*/
 
-#define CFG_GBL_DATA_SIZE	0x100		/* num bytes initial data */
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_GBL_DATA_SIZE	0x100		/* num bytes initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
-/* CFG_MONITOR_LEN must be a multiple of CFG_ENV_SECT_SIZE */
-#define CFG_MONITOR_LEN		(256 * 1024)	/* Reserve 256 kB for Mon */
-#define CFG_MALLOC_LEN		(512 * 1024)	/* Reserved for malloc */
+/* CONFIG_SYS_MONITOR_LEN must be a multiple of CONFIG_ENV_SECT_SIZE */
+#define CONFIG_SYS_MONITOR_LEN		(256 * 1024)	/* Reserve 256 kB for Mon */
+#define CONFIG_SYS_MALLOC_LEN		(512 * 1024)	/* Reserved for malloc */
 
 /*
  * Local Bus LCRR and LBCR regs
  */
-#define CFG_LCRR	LCRR_EADC_1 | LCRR_CLKDIV_4
-#define CFG_LBC_LBCR	( 0x00040000 /* TODO */ \
+#define CONFIG_SYS_LCRR	LCRR_EADC_1 | LCRR_CLKDIV_4
+#define CONFIG_SYS_LBC_LBCR	( 0x00040000 /* TODO */ \
 			| (0xFF << LBCR_BMT_SHIFT) \
 			| 0xF )	/* 0x0004ff0f */
 
-#define CFG_LBC_MRTPR	0x20000000  /*TODO */	/* LB refresh timer prescal, 266MHz/32 */
+#define CONFIG_SYS_LBC_MRTPR	0x20000000  /*TODO */	/* LB refresh timer prescal, 266MHz/32 */
 
 /* drivers/mtd/nand/nand.c */
 #ifdef CONFIG_NAND_SPL
-#define CFG_NAND_BASE		0xFFF00000
+#define CONFIG_SYS_NAND_BASE		0xFFF00000
 #else
-#define CFG_NAND_BASE		0xE2800000
+#define CONFIG_SYS_NAND_BASE		0xE2800000
 #endif
 
-#define CFG_MAX_NAND_DEVICE	1
+#define CONFIG_SYS_MAX_NAND_DEVICE	1
 #define NAND_MAX_CHIPS		1
 #define CONFIG_MTD_NAND_VERIFY_WRITE
 #define CONFIG_CMD_NAND 1
 #define CONFIG_NAND_FSL_ELBC 1
-#define CFG_NAND_BLOCK_SIZE 16384
+#define CONFIG_SYS_NAND_BLOCK_SIZE 16384
 
-#define CFG_NAND_U_BOOT_SIZE  (512 << 10)
-#define CFG_NAND_U_BOOT_DST   0x00100000
-#define CFG_NAND_U_BOOT_START 0x00100100
-#define CFG_NAND_U_BOOT_OFFS  16384
-#define CFG_NAND_U_BOOT_RELOC 0x00010000
+#define CONFIG_SYS_NAND_U_BOOT_SIZE  (512 << 10)
+#define CONFIG_SYS_NAND_U_BOOT_DST   0x00100000
+#define CONFIG_SYS_NAND_U_BOOT_START 0x00100100
+#define CONFIG_SYS_NAND_U_BOOT_OFFS  16384
+#define CONFIG_SYS_NAND_U_BOOT_RELOC 0x00010000
 
-#define CFG_NAND_BR_PRELIM	( CFG_NAND_BASE \
+#define CONFIG_SYS_NAND_BR_PRELIM	( CONFIG_SYS_NAND_BASE \
 				| (2<<BR_DECC_SHIFT)	/* Use HW ECC */ \
 				| BR_PS_8		/* Port Size = 8 bit */ \
 				| BR_MS_FCM		/* MSEL = FCM */ \
 				| BR_V )		/* valid */
-#define CFG_NAND_OR_PRELIM	( 0xFFFF8000		/* length 32K */ \
+#define CONFIG_SYS_NAND_OR_PRELIM	( 0xFFFF8000		/* length 32K */ \
 				| OR_FCM_CSCT \
 				| OR_FCM_CST \
 				| OR_FCM_CHT \
@@ -258,39 +259,39 @@
 				/* 0xFFFF8396 */
 
 #ifdef CONFIG_NAND_U_BOOT
-#define CFG_BR0_PRELIM CFG_NAND_BR_PRELIM
-#define CFG_OR0_PRELIM CFG_NAND_OR_PRELIM
-#define CFG_BR1_PRELIM CFG_NOR_BR_PRELIM
-#define CFG_OR1_PRELIM CFG_NOR_OR_PRELIM
+#define CONFIG_SYS_BR0_PRELIM CONFIG_SYS_NAND_BR_PRELIM
+#define CONFIG_SYS_OR0_PRELIM CONFIG_SYS_NAND_OR_PRELIM
+#define CONFIG_SYS_BR1_PRELIM CONFIG_SYS_NOR_BR_PRELIM
+#define CONFIG_SYS_OR1_PRELIM CONFIG_SYS_NOR_OR_PRELIM
 #else
-#define CFG_BR0_PRELIM CFG_NOR_BR_PRELIM
-#define CFG_OR0_PRELIM CFG_NOR_OR_PRELIM
-#define CFG_BR1_PRELIM CFG_NAND_BR_PRELIM
-#define CFG_OR1_PRELIM CFG_NAND_OR_PRELIM
+#define CONFIG_SYS_BR0_PRELIM CONFIG_SYS_NOR_BR_PRELIM
+#define CONFIG_SYS_OR0_PRELIM CONFIG_SYS_NOR_OR_PRELIM
+#define CONFIG_SYS_BR1_PRELIM CONFIG_SYS_NAND_BR_PRELIM
+#define CONFIG_SYS_OR1_PRELIM CONFIG_SYS_NAND_OR_PRELIM
 #endif
 
-#define CFG_LBLAWBAR1_PRELIM	CFG_NAND_BASE
-#define CFG_LBLAWAR1_PRELIM	0x8000000E	/* 32KB  */
+#define CONFIG_SYS_LBLAWBAR1_PRELIM	CONFIG_SYS_NAND_BASE
+#define CONFIG_SYS_LBLAWAR1_PRELIM	0x8000000E	/* 32KB  */
 
-#define CFG_NAND_LBLAWBAR_PRELIM CFG_LBLAWBAR1_PRELIM
-#define CFG_NAND_LBLAWAR_PRELIM CFG_LBLAWAR1_PRELIM
+#define CONFIG_SYS_NAND_LBLAWBAR_PRELIM CONFIG_SYS_LBLAWBAR1_PRELIM
+#define CONFIG_SYS_NAND_LBLAWAR_PRELIM CONFIG_SYS_LBLAWAR1_PRELIM
 
 /* local bus read write buffer mapping */
-#define CFG_BR3_PRELIM		0xFA000801	/* map at 0xFA000000 */
-#define CFG_OR3_PRELIM		0xFFFF8FF7	/* 32kB */
-#define CFG_LBLAWBAR3_PRELIM	0xFA000000
-#define CFG_LBLAWAR3_PRELIM	0x8000000E	/* 32KB  */
+#define CONFIG_SYS_BR3_PRELIM		0xFA000801	/* map at 0xFA000000 */
+#define CONFIG_SYS_OR3_PRELIM		0xFFFF8FF7	/* 32kB */
+#define CONFIG_SYS_LBLAWBAR3_PRELIM	0xFA000000
+#define CONFIG_SYS_LBLAWAR3_PRELIM	0x8000000E	/* 32KB  */
 
 /* Vitesse 7385 */
 
-#define CFG_VSC7385_BASE	0xF0000000
+#define CONFIG_SYS_VSC7385_BASE	0xF0000000
 
 #ifdef CONFIG_VSC7385_ENET
 
-#define CFG_BR2_PRELIM		0xf0000801	/* VSC7385 Base address */
-#define CFG_OR2_PRELIM		0xfffe09ff	/* VSC7385, 128K bytes*/
-#define CFG_LBLAWBAR2_PRELIM	CFG_VSC7385_BASE/* Access window base at VSC7385 base */
-#define CFG_LBLAWAR2_PRELIM	0x80000010	/* Access window size 128K */
+#define CONFIG_SYS_BR2_PRELIM		0xf0000801	/* VSC7385 Base address */
+#define CONFIG_SYS_OR2_PRELIM		0xfffe09ff	/* VSC7385, 128K bytes*/
+#define CONFIG_SYS_LBLAWBAR2_PRELIM	CONFIG_SYS_VSC7385_BASE/* Access window base at VSC7385 base */
+#define CONFIG_SYS_LBLAWAR2_PRELIM	0x80000010	/* Access window size 128K */
 
 #endif
 
@@ -303,47 +304,47 @@
  * Serial Port
  */
 #define CONFIG_CONS_INDEX	1
-#define CFG_NS16550
-#define CFG_NS16550_SERIAL
-#define CFG_NS16550_REG_SIZE	1
+#define CONFIG_SYS_NS16550
+#define CONFIG_SYS_NS16550_SERIAL
+#define CONFIG_SYS_NS16550_REG_SIZE	1
 
-#define CFG_BAUDRATE_TABLE	\
+#define CONFIG_SYS_BAUDRATE_TABLE	\
 	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 115200}
 
-#define CFG_NS16550_COM1	(CFG_IMMR+0x4500)
-#define CFG_NS16550_COM2	(CFG_IMMR+0x4600)
+#define CONFIG_SYS_NS16550_COM1	(CONFIG_SYS_IMMR+0x4500)
+#define CONFIG_SYS_NS16550_COM2	(CONFIG_SYS_IMMR+0x4600)
 
 /* Use the HUSH parser */
-#define CFG_HUSH_PARSER
-#define CFG_PROMPT_HUSH_PS2 "> "
+#define CONFIG_SYS_HUSH_PARSER
+#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
 
 /* I2C */
 #define CONFIG_HARD_I2C			/* I2C with hardware support*/
 #define CONFIG_FSL_I2C
 #define CONFIG_I2C_MULTI_BUS
 #define CONFIG_I2C_CMD_TREE
-#define CFG_I2C_SPEED		400000	/* I2C speed and slave address */
-#define CFG_I2C_SLAVE		0x7F
-#define CFG_I2C_NOPROBES	{{0,0x69}} /* Don't probe these addrs */
-#define CFG_I2C_OFFSET		0x3000
-#define CFG_I2C2_OFFSET		0x3100
+#define CONFIG_SYS_I2C_SPEED		400000	/* I2C speed and slave address */
+#define CONFIG_SYS_I2C_SLAVE		0x7F
+#define CONFIG_SYS_I2C_NOPROBES	{{0,0x69}} /* Don't probe these addrs */
+#define CONFIG_SYS_I2C_OFFSET		0x3000
+#define CONFIG_SYS_I2C2_OFFSET		0x3100
 
 /*
  * General PCI
  * Addresses are mapped 1-1.
  */
-#define CFG_PCI1_MEM_BASE	0x80000000
-#define CFG_PCI1_MEM_PHYS	CFG_PCI1_MEM_BASE
-#define CFG_PCI1_MEM_SIZE	0x10000000	/* 256M */
-#define CFG_PCI1_MMIO_BASE	0x90000000
-#define CFG_PCI1_MMIO_PHYS	CFG_PCI1_MMIO_BASE
-#define CFG_PCI1_MMIO_SIZE	0x10000000	/* 256M */
-#define CFG_PCI1_IO_BASE	0x00000000
-#define CFG_PCI1_IO_PHYS	0xE2000000
-#define CFG_PCI1_IO_SIZE	0x00100000	/* 1M */
+#define CONFIG_SYS_PCI1_MEM_BASE	0x80000000
+#define CONFIG_SYS_PCI1_MEM_PHYS	CONFIG_SYS_PCI1_MEM_BASE
+#define CONFIG_SYS_PCI1_MEM_SIZE	0x10000000	/* 256M */
+#define CONFIG_SYS_PCI1_MMIO_BASE	0x90000000
+#define CONFIG_SYS_PCI1_MMIO_PHYS	CONFIG_SYS_PCI1_MMIO_BASE
+#define CONFIG_SYS_PCI1_MMIO_SIZE	0x10000000	/* 256M */
+#define CONFIG_SYS_PCI1_IO_BASE	0x00000000
+#define CONFIG_SYS_PCI1_IO_PHYS	0xE2000000
+#define CONFIG_SYS_PCI1_IO_SIZE	0x00100000	/* 1M */
 
 #define CONFIG_PCI_PNP		/* do pci plug-and-play */
-#define CFG_PCI_SUBSYS_VENDORID 0x1057	/* Motorola */
+#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x1057	/* Motorola */
 
 /*
  * TSEC
@@ -356,7 +357,7 @@
 #ifdef CONFIG_TSEC1
 #define CONFIG_HAS_ETH0
 #define CONFIG_TSEC1_NAME	"TSEC0"
-#define CFG_TSEC1_OFFSET	0x24000
+#define CONFIG_SYS_TSEC1_OFFSET	0x24000
 #define TSEC1_PHY_ADDR		0x1c
 #define TSEC1_FLAGS		TSEC_GIGABIT
 #define TSEC1_PHYIDX		0
@@ -365,7 +366,7 @@
 #ifdef CONFIG_TSEC2
 #define CONFIG_HAS_ETH1
 #define CONFIG_TSEC2_NAME	"TSEC1"
-#define CFG_TSEC2_OFFSET	0x25000
+#define CONFIG_SYS_TSEC2_OFFSET	0x25000
 #define TSEC2_PHY_ADDR		4
 #define TSEC2_FLAGS		TSEC_GIGABIT
 #define TSEC2_PHYIDX		0
@@ -379,34 +380,34 @@
  * Configure on-board RTC
  */
 #define CONFIG_RTC_DS1337
-#define CFG_I2C_RTC_ADDR		0x68
+#define CONFIG_SYS_I2C_RTC_ADDR		0x68
 
 /*
  * Environment
  */
 #if defined(CONFIG_NAND_U_BOOT)
-	#define CFG_ENV_IS_IN_NAND	1
-	#define CFG_ENV_OFFSET		(512 * 1024)
-	#define CFG_ENV_SECT_SIZE	CFG_NAND_BLOCK_SIZE
-	#define CFG_ENV_SIZE		CFG_ENV_SECT_SIZE
-	#define CFG_ENV_SIZE_REDUND	CFG_ENV_SIZE
-	#define CFG_ENV_RANGE		(CFG_ENV_SECT_SIZE * 4)
-	#define CFG_ENV_OFFSET_REDUND	(CFG_ENV_OFFSET + CFG_ENV_RANGE)
-#elif !defined(CFG_RAMBOOT)
-	#define CFG_ENV_IS_IN_FLASH	1
-	#define CFG_ENV_ADDR		(CFG_MONITOR_BASE + CFG_MONITOR_LEN)
-	#define CFG_ENV_SECT_SIZE	0x10000	/* 64K(one sector) for env */
-	#define CFG_ENV_SIZE		0x2000
+	#define CONFIG_ENV_IS_IN_NAND	1
+	#define CONFIG_ENV_OFFSET		(512 * 1024)
+	#define CONFIG_ENV_SECT_SIZE	CONFIG_SYS_NAND_BLOCK_SIZE
+	#define CONFIG_ENV_SIZE		CONFIG_ENV_SECT_SIZE
+	#define CONFIG_ENV_SIZE_REDUND	CONFIG_ENV_SIZE
+	#define CONFIG_ENV_RANGE		(CONFIG_ENV_SECT_SIZE * 4)
+	#define CONFIG_ENV_OFFSET_REDUND	(CONFIG_ENV_OFFSET + CONFIG_ENV_RANGE)
+#elif !defined(CONFIG_SYS_RAMBOOT)
+	#define CONFIG_ENV_IS_IN_FLASH	1
+	#define CONFIG_ENV_ADDR		(CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)
+	#define CONFIG_ENV_SECT_SIZE	0x10000	/* 64K(one sector) for env */
+	#define CONFIG_ENV_SIZE		0x2000
 
 /* Address and size of Redundant Environment Sector */
 #else
-	#define CFG_ENV_IS_NOWHERE	1	/* Store ENV in memory only */
-	#define CFG_ENV_ADDR		(CFG_MONITOR_BASE - 0x1000)
-	#define CFG_ENV_SIZE		0x2000
+	#define CONFIG_ENV_IS_NOWHERE	1	/* Store ENV in memory only */
+	#define CONFIG_ENV_ADDR		(CONFIG_SYS_MONITOR_BASE - 0x1000)
+	#define CONFIG_ENV_SIZE		0x2000
 #endif
 
 #define CONFIG_LOADS_ECHO	1	/* echo on for serial download */
-#define CFG_LOADS_BAUD_CHANGE	1	/* allow baudrate change */
+#define CONFIG_SYS_LOADS_BAUD_CHANGE	1	/* allow baudrate change */
 
 /*
  * BOOTP options
@@ -429,7 +430,7 @@
 #define CONFIG_CMD_DATE
 #define CONFIG_CMD_PCI
 
-#if defined(CFG_RAMBOOT) && !defined(CONFIG_NAND_U_BOOT)
+#if defined(CONFIG_SYS_RAMBOOT) && !defined(CONFIG_NAND_U_BOOT)
     #undef CONFIG_CMD_ENV
     #undef CONFIG_CMD_LOADS
 #endif
@@ -440,30 +441,30 @@
 /*
  * Miscellaneous configurable options
  */
-#define CFG_LONGHELP			/* undef to save memory */
-#define CFG_LOAD_ADDR	0x2000000	/* default load address */
-#define CFG_PROMPT	"=> "		/* Monitor Command Prompt */
-#define CFG_CBSIZE	1024		/* Console I/O Buffer Size */
+#define CONFIG_SYS_LONGHELP			/* undef to save memory */
+#define CONFIG_SYS_LOAD_ADDR	0x2000000	/* default load address */
+#define CONFIG_SYS_PROMPT	"=> "		/* Monitor Command Prompt */
+#define CONFIG_SYS_CBSIZE	1024		/* Console I/O Buffer Size */
 
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16)	/* Print Buffer Size */
-#define CFG_MAXARGS	16		/* max number of command args */
-#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size */
-#define CFG_HZ		1000		/* decrementer freq: 1ms ticks */
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)	/* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS	16		/* max number of command args */
+#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size */
+#define CONFIG_SYS_HZ		1000		/* decrementer freq: 1ms ticks */
 
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define CFG_BOOTMAPSZ	(8 << 20)	/* Initial Memory map for Linux*/
+#define CONFIG_SYS_BOOTMAPSZ	(8 << 20)	/* Initial Memory map for Linux*/
 
-#define CFG_RCWH_PCIHOST 0x80000000	/* PCIHOST  */
+#define CONFIG_SYS_RCWH_PCIHOST 0x80000000	/* PCIHOST  */
 
-#ifdef CFG_66MHZ
+#ifdef CONFIG_SYS_66MHZ
 
 /* 66MHz IN, 133MHz CSB, 266 DDR, 266 CORE */
 /* 0x62040000 */
-#define CFG_HRCW_LOW (\
+#define CONFIG_SYS_HRCW_LOW (\
 	0x20000000 /* reserved, must be set */ |\
 	HRCWL_DDRCM |\
 	HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\
@@ -471,13 +472,13 @@
 	HRCWL_CSB_TO_CLKIN_2X1 |\
 	HRCWL_CORE_TO_CSB_2X1)
 
-#define CFG_NS16550_CLK (CONFIG_83XX_CLKIN * 2)
+#define CONFIG_SYS_NS16550_CLK (CONFIG_83XX_CLKIN * 2)
 
-#elif defined(CFG_33MHZ)
+#elif defined(CONFIG_SYS_33MHZ)
 
 /* 33MHz IN, 165MHz CSB, 330 DDR, 330 CORE */
 /* 0x65040000 */
-#define CFG_HRCW_LOW (\
+#define CONFIG_SYS_HRCW_LOW (\
 	0x20000000 /* reserved, must be set */ |\
 	HRCWL_DDRCM |\
 	HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\
@@ -485,11 +486,11 @@
 	HRCWL_CSB_TO_CLKIN_5X1 |\
 	HRCWL_CORE_TO_CSB_2X1)
 
-#define CFG_NS16550_CLK (CONFIG_83XX_CLKIN * 5)
+#define CONFIG_SYS_NS16550_CLK (CONFIG_83XX_CLKIN * 5)
 
 #endif
 
-#define CFG_HRCW_HIGH_BASE (\
+#define CONFIG_SYS_HRCW_HIGH_BASE (\
 	HRCWH_PCI_HOST |\
 	HRCWH_PCI1_ARBITER_ENABLE |\
 	HRCWH_CORE_ENABLE |\
@@ -500,72 +501,72 @@
 	HRCWH_BIG_ENDIAN)
 
 #ifdef CONFIG_NAND_SPL
-#define CFG_HRCW_HIGH (CFG_HRCW_HIGH_BASE |\
+#define CONFIG_SYS_HRCW_HIGH (CONFIG_SYS_HRCW_HIGH_BASE |\
 		       HRCWH_FROM_0XFFF00100 |\
 		       HRCWH_ROM_LOC_NAND_SP_8BIT |\
 		       HRCWH_RL_EXT_NAND)
 #else
-#define CFG_HRCW_HIGH (CFG_HRCW_HIGH_BASE |\
+#define CONFIG_SYS_HRCW_HIGH (CONFIG_SYS_HRCW_HIGH_BASE |\
 		       HRCWH_FROM_0X00000100 |\
 		       HRCWH_ROM_LOC_LOCAL_16BIT |\
 		       HRCWH_RL_EXT_LEGACY)
 #endif
 
 /* System IO Config */
-#define CFG_SICRH	(SICRH_TSOBI1 | SICRH_TSOBI2)	/* RGMII */
-#define CFG_SICRL	SICRL_USBDR			/* Enable Internal USB Phy  */
+#define CONFIG_SYS_SICRH	(SICRH_TSOBI1 | SICRH_TSOBI2)	/* RGMII */
+#define CONFIG_SYS_SICRL	SICRL_USBDR			/* Enable Internal USB Phy  */
 
-#define CFG_HID0_INIT	0x000000000
-#define CFG_HID0_FINAL	(HID0_ENABLE_MACHINE_CHECK | \
+#define CONFIG_SYS_HID0_INIT	0x000000000
+#define CONFIG_SYS_HID0_FINAL	(HID0_ENABLE_MACHINE_CHECK | \
 			 HID0_ENABLE_DYNAMIC_POWER_MANAGMENT)
 
-#define CFG_HID2 HID2_HBE
+#define CONFIG_SYS_HID2 HID2_HBE
 
 #define CONFIG_HIGH_BATS	1	/* High BATs supported */
 
 /* DDR @ 0x00000000 */
-#define CFG_IBAT0L	(CFG_SDRAM_BASE | BATL_PP_10)
-#define CFG_IBAT0U	(CFG_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CONFIG_SYS_IBAT0L	(CONFIG_SYS_SDRAM_BASE | BATL_PP_10)
+#define CONFIG_SYS_IBAT0U	(CONFIG_SYS_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
 
 /* PCI @ 0x80000000 */
-#define CFG_IBAT1L	(CFG_PCI1_MEM_BASE | BATL_PP_10)
-#define CFG_IBAT1U	(CFG_PCI1_MEM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
-#define CFG_IBAT2L	(CFG_PCI1_MMIO_BASE | BATL_PP_10 | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
-#define CFG_IBAT2U	(CFG_PCI1_MMIO_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CONFIG_SYS_IBAT1L	(CONFIG_SYS_PCI1_MEM_BASE | BATL_PP_10)
+#define CONFIG_SYS_IBAT1U	(CONFIG_SYS_PCI1_MEM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CONFIG_SYS_IBAT2L	(CONFIG_SYS_PCI1_MMIO_BASE | BATL_PP_10 | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
+#define CONFIG_SYS_IBAT2U	(CONFIG_SYS_PCI1_MMIO_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
 
 /* PCI2 not supported on 8313 */
-#define CFG_IBAT3L	(0)
-#define CFG_IBAT3U	(0)
-#define CFG_IBAT4L	(0)
-#define CFG_IBAT4U	(0)
+#define CONFIG_SYS_IBAT3L	(0)
+#define CONFIG_SYS_IBAT3U	(0)
+#define CONFIG_SYS_IBAT4L	(0)
+#define CONFIG_SYS_IBAT4U	(0)
 
 /* IMMRBAR @ 0xE0000000, PCI IO @ 0xE2000000 & BCSR @ 0xE2400000 */
-#define CFG_IBAT5L	(CFG_IMMR | BATL_PP_10 | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
-#define CFG_IBAT5U	(CFG_IMMR | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CONFIG_SYS_IBAT5L	(CONFIG_SYS_IMMR | BATL_PP_10 | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
+#define CONFIG_SYS_IBAT5U	(CONFIG_SYS_IMMR | BATU_BL_256M | BATU_VS | BATU_VP)
 
 /* SDRAM @ 0xF0000000, stack in DCACHE 0xFDF00000 & FLASH @ 0xFE000000 */
-#define CFG_IBAT6L	(0xF0000000 | BATL_PP_10)
-#define CFG_IBAT6U	(0xF0000000 | BATU_BL_256M | BATU_VS | BATU_VP)
-
-#define CFG_IBAT7L	(0)
-#define CFG_IBAT7U	(0)
-
-#define CFG_DBAT0L	CFG_IBAT0L
-#define CFG_DBAT0U	CFG_IBAT0U
-#define CFG_DBAT1L	CFG_IBAT1L
-#define CFG_DBAT1U	CFG_IBAT1U
-#define CFG_DBAT2L	CFG_IBAT2L
-#define CFG_DBAT2U	CFG_IBAT2U
-#define CFG_DBAT3L	CFG_IBAT3L
-#define CFG_DBAT3U	CFG_IBAT3U
-#define CFG_DBAT4L	CFG_IBAT4L
-#define CFG_DBAT4U	CFG_IBAT4U
-#define CFG_DBAT5L	CFG_IBAT5L
-#define CFG_DBAT5U	CFG_IBAT5U
-#define CFG_DBAT6L	CFG_IBAT6L
-#define CFG_DBAT6U	CFG_IBAT6U
-#define CFG_DBAT7L	CFG_IBAT7L
-#define CFG_DBAT7U	CFG_IBAT7U
+#define CONFIG_SYS_IBAT6L	(0xF0000000 | BATL_PP_10)
+#define CONFIG_SYS_IBAT6U	(0xF0000000 | BATU_BL_256M | BATU_VS | BATU_VP)
+
+#define CONFIG_SYS_IBAT7L	(0)
+#define CONFIG_SYS_IBAT7U	(0)
+
+#define CONFIG_SYS_DBAT0L	CONFIG_SYS_IBAT0L
+#define CONFIG_SYS_DBAT0U	CONFIG_SYS_IBAT0U
+#define CONFIG_SYS_DBAT1L	CONFIG_SYS_IBAT1L
+#define CONFIG_SYS_DBAT1U	CONFIG_SYS_IBAT1U
+#define CONFIG_SYS_DBAT2L	CONFIG_SYS_IBAT2L
+#define CONFIG_SYS_DBAT2U	CONFIG_SYS_IBAT2U
+#define CONFIG_SYS_DBAT3L	CONFIG_SYS_IBAT3L
+#define CONFIG_SYS_DBAT3U	CONFIG_SYS_IBAT3U
+#define CONFIG_SYS_DBAT4L	CONFIG_SYS_IBAT4L
+#define CONFIG_SYS_DBAT4U	CONFIG_SYS_IBAT4U
+#define CONFIG_SYS_DBAT5L	CONFIG_SYS_IBAT5L
+#define CONFIG_SYS_DBAT5U	CONFIG_SYS_IBAT5U
+#define CONFIG_SYS_DBAT6L	CONFIG_SYS_IBAT6L
+#define CONFIG_SYS_DBAT6U	CONFIG_SYS_IBAT6U
+#define CONFIG_SYS_DBAT7L	CONFIG_SYS_IBAT7L
+#define CONFIG_SYS_DBAT7U	CONFIG_SYS_IBAT7U
 
 /*
  * Internal Definitions
@@ -596,7 +597,7 @@
 #define CONFIG_FDTFILE		mpc8313erdb.dtb
 
 #define CONFIG_LOADADDR		500000	/* default location for tftp and bootm */
-#define CONFIG_BOOTDELAY	-1	/* -1 disables auto-boot */
+#define CONFIG_BOOTDELAY	6	/* -1 disables auto-boot */
 #define CONFIG_BAUDRATE		115200
 
 #define XMK_STR(x)	#x
diff --git a/include/configs/MPC8315ERDB.h b/include/configs/MPC8315ERDB.h
index 006b93a0b..add65f03d 100644
--- a/include/configs/MPC8315ERDB.h
+++ b/include/configs/MPC8315ERDB.h
@@ -45,13 +45,13 @@
  * if CLKIN is 66.66MHz, then
  * CSB = 133MHz, CORE = 400MHz, DDRC = 266MHz, LBC = 133MHz
  */
-#define CFG_HRCW_LOW (\
+#define CONFIG_SYS_HRCW_LOW (\
 	HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\
 	HRCWL_DDR_TO_SCB_CLK_2X1 |\
 	HRCWL_SVCOD_DIV_2 |\
 	HRCWL_CSB_TO_CLKIN_2X1 |\
 	HRCWL_CORE_TO_CSB_3X1)
-#define CFG_HRCW_HIGH (\
+#define CONFIG_SYS_HRCW_HIGH (\
 	HRCWH_PCI_HOST |\
 	HRCWH_PCI1_ARBITER_ENABLE |\
 	HRCWH_CORE_ENABLE |\
@@ -68,31 +68,31 @@
 /*
  * System IO Config
  */
-#define CFG_SICRH		0x00000000
-#define CFG_SICRL		0x00000000 /* 3.3V, no delay */
+#define CONFIG_SYS_SICRH		0x00000000
+#define CONFIG_SYS_SICRL		0x00000000 /* 3.3V, no delay */
 
 #define CONFIG_BOARD_EARLY_INIT_F /* call board_pre_init */
 
 /*
  * IMMR new address
  */
-#define CFG_IMMR		0xE0000000
+#define CONFIG_SYS_IMMR		0xE0000000
 
 /*
  * Arbiter Setup
  */
-#define CFG_ACR_PIPE_DEP	3 /* Arbiter pipeline depth is 4 */
-#define CFG_ACR_RPTCNT		3 /* Arbiter repeat count is 4 */
-#define CFG_SPCR_TSECEP		3 /* eTSEC emergency priority is highest */
+#define CONFIG_SYS_ACR_PIPE_DEP	3 /* Arbiter pipeline depth is 4 */
+#define CONFIG_SYS_ACR_RPTCNT		3 /* Arbiter repeat count is 4 */
+#define CONFIG_SYS_SPCR_TSECEP		3 /* eTSEC emergency priority is highest */
 
 /*
  * DDR Setup
  */
-#define CFG_DDR_BASE		0x00000000 /* DDR is system memory */
-#define CFG_SDRAM_BASE		CFG_DDR_BASE
-#define CFG_DDR_SDRAM_BASE	CFG_DDR_BASE
-#define CFG_DDR_SDRAM_CLK_CNTL	DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05
-#define CFG_DDRCDR_VALUE	( DDRCDR_EN \
+#define CONFIG_SYS_DDR_BASE		0x00000000 /* DDR is system memory */
+#define CONFIG_SYS_SDRAM_BASE		CONFIG_SYS_DDR_BASE
+#define CONFIG_SYS_DDR_SDRAM_BASE	CONFIG_SYS_DDR_BASE
+#define CONFIG_SYS_DDR_SDRAM_CLK_CNTL	DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05
+#define CONFIG_SYS_DDRCDR_VALUE	( DDRCDR_EN \
 				| DDRCDR_PZ_LOZ \
 				| DDRCDR_NZ_LOZ \
 				| DDRCDR_ODT \
@@ -102,14 +102,14 @@
  * Manually set up DDR parameters
  * consist of two chips HY5PS12621BFP-C4 from HYNIX
  */
-#define CFG_DDR_SIZE		128 /* MB */
-#define CFG_DDR_CS0_BNDS	0x00000007
-#define CFG_DDR_CS0_CONFIG	( CSCONFIG_EN \
+#define CONFIG_SYS_DDR_SIZE		128 /* MB */
+#define CONFIG_SYS_DDR_CS0_BNDS	0x00000007
+#define CONFIG_SYS_DDR_CS0_CONFIG	( CSCONFIG_EN \
 				| 0x00010000  /* ODT_WR to CSn */ \
 				| CSCONFIG_ROW_BIT_13 | CSCONFIG_COL_BIT_10 )
 				/* 0x80010102 */
-#define CFG_DDR_TIMING_3	0x00000000
-#define CFG_DDR_TIMING_0	( ( 0 << TIMING_CFG0_RWT_SHIFT ) \
+#define CONFIG_SYS_DDR_TIMING_3	0x00000000
+#define CONFIG_SYS_DDR_TIMING_0	( ( 0 << TIMING_CFG0_RWT_SHIFT ) \
 				| ( 0 << TIMING_CFG0_WRT_SHIFT ) \
 				| ( 0 << TIMING_CFG0_RRT_SHIFT ) \
 				| ( 0 << TIMING_CFG0_WWT_SHIFT ) \
@@ -118,89 +118,90 @@
 				| ( 8 << TIMING_CFG0_ODT_PD_EXIT_SHIFT ) \
 				| ( 2 << TIMING_CFG0_MRS_CYC_SHIFT ) )
 				/* 0x00220802 */
-#define CFG_DDR_TIMING_1	( ( 3 << TIMING_CFG1_PRETOACT_SHIFT ) \
-				| ( 9 << TIMING_CFG1_ACTTOPRE_SHIFT ) \
-				| ( 3 << TIMING_CFG1_ACTTORW_SHIFT ) \
+#define CONFIG_SYS_DDR_TIMING_1	( ( 2 << TIMING_CFG1_PRETOACT_SHIFT ) \
+				| ( 7 << TIMING_CFG1_ACTTOPRE_SHIFT ) \
+				| ( 2 << TIMING_CFG1_ACTTORW_SHIFT ) \
 				| ( 5 << TIMING_CFG1_CASLAT_SHIFT ) \
 				| ( 6 << TIMING_CFG1_REFREC_SHIFT ) \
 				| ( 2 << TIMING_CFG1_WRREC_SHIFT ) \
 				| ( 2 << TIMING_CFG1_ACTTOACT_SHIFT ) \
 				| ( 2 << TIMING_CFG1_WRTORD_SHIFT ) )
-				/* 0x39356222 */
-#define CFG_DDR_TIMING_2	( ( 1 << TIMING_CFG2_ADD_LAT_SHIFT ) \
+				/* 0x27256222 */
+#define CONFIG_SYS_DDR_TIMING_2	( ( 1 << TIMING_CFG2_ADD_LAT_SHIFT ) \
 				| ( 4 << TIMING_CFG2_CPO_SHIFT ) \
 				| ( 2 << TIMING_CFG2_WR_LAT_DELAY_SHIFT ) \
 				| ( 2 << TIMING_CFG2_RD_TO_PRE_SHIFT ) \
 				| ( 2 << TIMING_CFG2_WR_DATA_DELAY_SHIFT ) \
 				| ( 3 << TIMING_CFG2_CKE_PLS_SHIFT ) \
-				| ( 7 << TIMING_CFG2_FOUR_ACT_SHIFT) )
-				/* 0x121048c7 */
-#define CFG_DDR_INTERVAL	( ( 0x0360 << SDRAM_INTERVAL_REFINT_SHIFT ) \
+				| ( 5 << TIMING_CFG2_FOUR_ACT_SHIFT) )
+				/* 0x121048c5 */
+#define CONFIG_SYS_DDR_INTERVAL	( ( 0x0360 << SDRAM_INTERVAL_REFINT_SHIFT ) \
 				| ( 0x0100 << SDRAM_INTERVAL_BSTOPRE_SHIFT ) )
 				/* 0x03600100 */
-#define CFG_DDR_SDRAM_CFG	( SDRAM_CFG_SREN \
+#define CONFIG_SYS_DDR_SDRAM_CFG	( SDRAM_CFG_SREN \
 				| SDRAM_CFG_SDRAM_TYPE_DDR2 \
 				| SDRAM_CFG_32_BE )
 				/* 0x43080000 */
-#define CFG_DDR_SDRAM_CFG2	0x00401000 /* 1 posted refresh */
-#define CFG_DDR_MODE		( ( 0x0448 << SDRAM_MODE_ESD_SHIFT ) \
+#define CONFIG_SYS_DDR_SDRAM_CFG2	0x00401000 /* 1 posted refresh */
+#define CONFIG_SYS_DDR_MODE		( ( 0x0448 << SDRAM_MODE_ESD_SHIFT ) \
 				| ( 0x0232 << SDRAM_MODE_SD_SHIFT ) )
 				/* ODT 150ohm CL=3, AL=1 on SDRAM */
-#define CFG_DDR_MODE2		0x00000000
+#define CONFIG_SYS_DDR_MODE2		0x00000000
 
 /*
  * Memory test
  */
-#undef CFG_DRAM_TEST		/* memory test, takes time */
-#define CFG_MEMTEST_START	0x00040000 /* memtest region */
-#define CFG_MEMTEST_END		0x00140000
+#undef CONFIG_SYS_DRAM_TEST		/* memory test, takes time */
+#define CONFIG_SYS_MEMTEST_START	0x00040000 /* memtest region */
+#define CONFIG_SYS_MEMTEST_END		0x00140000
 
 /*
  * The reserved memory
  */
-#define CFG_MONITOR_BASE	TEXT_BASE /* start of monitor */
+#define CONFIG_SYS_MONITOR_BASE	TEXT_BASE /* start of monitor */
 
-#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
-#define CFG_RAMBOOT
+#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
+#define CONFIG_SYS_RAMBOOT
 #else
-#undef CFG_RAMBOOT
+#undef CONFIG_SYS_RAMBOOT
 #endif
 
-#define CFG_MONITOR_LEN		(256 * 1024) /* Reserve 256 kB for Mon */
-#define CFG_MALLOC_LEN		(512 * 1024) /* Reserved for malloc */
+#define CONFIG_SYS_MONITOR_LEN		(256 * 1024) /* Reserve 256 kB for Mon */
+#define CONFIG_SYS_MALLOC_LEN		(512 * 1024) /* Reserved for malloc */
 
 /*
  * Initial RAM Base Address Setup
  */
-#define CFG_INIT_RAM_LOCK	1
-#define CFG_INIT_RAM_ADDR	0xE6000000 /* Initial RAM address */
-#define CFG_INIT_RAM_END	0x1000 /* End of used area in RAM */
-#define CFG_GBL_DATA_SIZE	0x100 /* num bytes initial data */
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_RAM_LOCK	1
+#define CONFIG_SYS_INIT_RAM_ADDR	0xE6000000 /* Initial RAM address */
+#define CONFIG_SYS_INIT_RAM_END	0x1000 /* End of used area in RAM */
+#define CONFIG_SYS_GBL_DATA_SIZE	0x100 /* num bytes initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
 
 /*
  * Local Bus Configuration & Clock Setup
  */
-#define CFG_LCRR		(LCRR_DBYP | LCRR_CLKDIV_2)
-#define CFG_LBC_LBCR		0x00040000
+#define CONFIG_SYS_LCRR		(LCRR_DBYP | LCRR_CLKDIV_2)
+#define CONFIG_SYS_LBC_LBCR		0x00040000
 
 /*
  * FLASH on the Local Bus
  */
-#define CFG_FLASH_CFI		/* use the Common Flash Interface */
+#define CONFIG_SYS_FLASH_CFI		/* use the Common Flash Interface */
 #define CONFIG_FLASH_CFI_DRIVER	/* use the CFI driver */
-#define CFG_FLASH_CFI_WIDTH	FLASH_CFI_16BIT
+#define CONFIG_SYS_FLASH_CFI_WIDTH	FLASH_CFI_16BIT
 
-#define CFG_FLASH_BASE		0xFE000000 /* FLASH base address */
-#define CFG_FLASH_SIZE		8 /* FLASH size is 8M */
+#define CONFIG_SYS_FLASH_BASE		0xFE000000 /* FLASH base address */
+#define CONFIG_SYS_FLASH_SIZE		8 /* FLASH size is 8M */
+#define CONFIG_SYS_FLASH_PROTECTION	1		/* Use h/w Flash protection. */
 
-#define CFG_LBLAWBAR0_PRELIM	CFG_FLASH_BASE /* Window base at flash base */
-#define CFG_LBLAWAR0_PRELIM	0x80000016 /* 8MB window size */
+#define CONFIG_SYS_LBLAWBAR0_PRELIM	CONFIG_SYS_FLASH_BASE /* Window base at flash base */
+#define CONFIG_SYS_LBLAWAR0_PRELIM	0x80000016 /* 8MB window size */
 
-#define CFG_BR0_PRELIM		( CFG_FLASH_BASE	/* Flash Base address */ \
+#define CONFIG_SYS_BR0_PRELIM		( CONFIG_SYS_FLASH_BASE	/* Flash Base address */ \
 				| (2 << BR_PS_SHIFT)	/* 16 bit port size */ \
 				| BR_V )		/* valid */
-#define CFG_OR0_PRELIM		( (~(CFG_FLASH_SIZE - 1) << 20) \
+#define CONFIG_SYS_OR0_PRELIM		( (~(CONFIG_SYS_FLASH_SIZE - 1) << 20) \
 				| OR_UPM_XAM \
 				| OR_GPCM_CSNT \
 				| OR_GPCM_ACS_DIV2 \
@@ -210,27 +211,27 @@
 				| OR_GPCM_EHTR \
 				| OR_GPCM_EAD )
 
-#define CFG_MAX_FLASH_BANKS	1 /* number of banks */
-#define CFG_MAX_FLASH_SECT	135 /* 127 64KB sectors and 8 8KB top sectors per device */
+#define CONFIG_SYS_MAX_FLASH_BANKS	1 /* number of banks */
+#define CONFIG_SYS_MAX_FLASH_SECT	135 /* 127 64KB sectors and 8 8KB top sectors per device */
 
-#undef CFG_FLASH_CHECKSUM
-#define CFG_FLASH_ERASE_TOUT	60000 /* Flash Erase Timeout (ms) */
-#define CFG_FLASH_WRITE_TOUT	500 /* Flash Write Timeout (ms) */
+#undef CONFIG_SYS_FLASH_CHECKSUM
+#define CONFIG_SYS_FLASH_ERASE_TOUT	60000 /* Flash Erase Timeout (ms) */
+#define CONFIG_SYS_FLASH_WRITE_TOUT	500 /* Flash Write Timeout (ms) */
 
 /*
  * NAND Flash on the Local Bus
  */
-#define CFG_NAND_BASE		0xE0600000	/* 0xE0600000 */
-#define CFG_MAX_NAND_DEVICE	1
+#define CONFIG_SYS_NAND_BASE		0xE0600000	/* 0xE0600000 */
+#define CONFIG_SYS_MAX_NAND_DEVICE	1
 #define NAND_MAX_CHIPS		1
 #define CONFIG_MTD_NAND_VERIFY_WRITE
 
-#define CFG_BR1_PRELIM		( CFG_NAND_BASE \
+#define CONFIG_SYS_BR1_PRELIM		( CONFIG_SYS_NAND_BASE \
 				| (2<<BR_DECC_SHIFT)	/* Use HW ECC */ \
 				| BR_PS_8		/* Port Size = 8 bit */ \
 				| BR_MS_FCM		/* MSEL = FCM */ \
 				| BR_V )		/* valid */
-#define CFG_OR1_PRELIM		( 0xFFFF8000		/* length 32K */ \
+#define CONFIG_SYS_OR1_PRELIM		( 0xFFFF8000		/* length 32K */ \
 				| OR_FCM_CSCT \
 				| OR_FCM_CST \
 				| OR_FCM_CHT \
@@ -239,29 +240,29 @@
 				| OR_FCM_EHTR )
 				/* 0xFFFF8396 */
 
-#define CFG_LBLAWBAR1_PRELIM	CFG_NAND_BASE
-#define CFG_LBLAWAR1_PRELIM	0x8000000E	/* 32KB  */
+#define CONFIG_SYS_LBLAWBAR1_PRELIM	CONFIG_SYS_NAND_BASE
+#define CONFIG_SYS_LBLAWAR1_PRELIM	0x8000000E	/* 32KB  */
 
 /*
  * Serial Port
  */
 #define CONFIG_CONS_INDEX	1
 #undef CONFIG_SERIAL_SOFTWARE_FIFO
-#define CFG_NS16550
-#define CFG_NS16550_SERIAL
-#define CFG_NS16550_REG_SIZE	1
-#define CFG_NS16550_CLK		get_bus_freq(0)
+#define CONFIG_SYS_NS16550
+#define CONFIG_SYS_NS16550_SERIAL
+#define CONFIG_SYS_NS16550_REG_SIZE	1
+#define CONFIG_SYS_NS16550_CLK		get_bus_freq(0)
 
-#define CFG_BAUDRATE_TABLE  \
+#define CONFIG_SYS_BAUDRATE_TABLE  \
 	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
 
-#define CFG_NS16550_COM1	(CFG_IMMR+0x4500)
-#define CFG_NS16550_COM2	(CFG_IMMR+0x4600)
+#define CONFIG_SYS_NS16550_COM1	(CONFIG_SYS_IMMR+0x4500)
+#define CONFIG_SYS_NS16550_COM2	(CONFIG_SYS_IMMR+0x4600)
 
 /* Use the HUSH parser */
-#define CFG_HUSH_PARSER
-#ifdef CFG_HUSH_PARSER
-#define CFG_PROMPT_HUSH_PS2 "> "
+#define CONFIG_SYS_HUSH_PARSER
+#ifdef CONFIG_SYS_HUSH_PARSER
+#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
 #endif
 
 /* Pass open firmware flat tree */
@@ -272,40 +273,40 @@
 /* I2C */
 #define CONFIG_HARD_I2C		/* I2C with hardware support */
 #define CONFIG_FSL_I2C
-#define CFG_I2C_SPEED		400000 /* I2C speed and slave address */
-#define CFG_I2C_SLAVE		0x7F
-#define CFG_I2C_NOPROBES	{0x51} /* Don't probe these addrs */
-#define CFG_I2C_OFFSET		0x3000
-#define CFG_I2C2_OFFSET		0x3100
+#define CONFIG_SYS_I2C_SPEED		400000 /* I2C speed and slave address */
+#define CONFIG_SYS_I2C_SLAVE		0x7F
+#define CONFIG_SYS_I2C_NOPROBES	{0x51} /* Don't probe these addrs */
+#define CONFIG_SYS_I2C_OFFSET		0x3000
+#define CONFIG_SYS_I2C2_OFFSET		0x3100
 
 /*
  * Board info - revision and where boot from
  */
-#define CFG_I2C_PCF8574A_ADDR	0x39
+#define CONFIG_SYS_I2C_PCF8574A_ADDR	0x39
 
 /*
  * Config on-board RTC
  */
 #define CONFIG_RTC_DS1337	/* ds1339 on board, use ds1337 rtc via i2c */
-#define CFG_I2C_RTC_ADDR	0x68 /* at address 0x68 */
+#define CONFIG_SYS_I2C_RTC_ADDR	0x68 /* at address 0x68 */
 
 /*
  * General PCI
  * Addresses are mapped 1-1.
  */
-#define CFG_PCI_MEM_BASE	0x80000000
-#define CFG_PCI_MEM_PHYS	CFG_PCI_MEM_BASE
-#define CFG_PCI_MEM_SIZE	0x10000000 /* 256M */
-#define CFG_PCI_MMIO_BASE	0x90000000
-#define CFG_PCI_MMIO_PHYS	CFG_PCI_MMIO_BASE
-#define CFG_PCI_MMIO_SIZE	0x10000000 /* 256M */
-#define CFG_PCI_IO_BASE		0x00000000
-#define CFG_PCI_IO_PHYS		0xE0300000
-#define CFG_PCI_IO_SIZE		0x100000 /* 1M */
-
-#define CFG_PCI_SLV_MEM_LOCAL	CFG_SDRAM_BASE
-#define CFG_PCI_SLV_MEM_BUS	0x00000000
-#define CFG_PCI_SLV_MEM_SIZE	0x80000000
+#define CONFIG_SYS_PCI_MEM_BASE	0x80000000
+#define CONFIG_SYS_PCI_MEM_PHYS	CONFIG_SYS_PCI_MEM_BASE
+#define CONFIG_SYS_PCI_MEM_SIZE	0x10000000 /* 256M */
+#define CONFIG_SYS_PCI_MMIO_BASE	0x90000000
+#define CONFIG_SYS_PCI_MMIO_PHYS	CONFIG_SYS_PCI_MMIO_BASE
+#define CONFIG_SYS_PCI_MMIO_SIZE	0x10000000 /* 256M */
+#define CONFIG_SYS_PCI_IO_BASE		0x00000000
+#define CONFIG_SYS_PCI_IO_PHYS		0xE0300000
+#define CONFIG_SYS_PCI_IO_SIZE		0x100000 /* 1M */
+
+#define CONFIG_SYS_PCI_SLV_MEM_LOCAL	CONFIG_SYS_SDRAM_BASE
+#define CONFIG_SYS_PCI_SLV_MEM_BUS	0x00000000
+#define CONFIG_SYS_PCI_SLV_MEM_SIZE	0x80000000
 
 #define CONFIG_PCI
 #define CONFIG_83XX_GENERIC_PCI	1 /* Use generic PCI setup */
@@ -315,7 +316,7 @@
 
 #define CONFIG_EEPRO100
 #undef CONFIG_PCI_SCAN_SHOW	/* show pci devices on startup */
-#define CFG_PCI_SUBSYS_VENDORID 0x1957	/* Freescale */
+#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x1957	/* Freescale */
 
 #ifndef CONFIG_NET_MULTI
 #define CONFIG_NET_MULTI	1
@@ -327,10 +328,10 @@
  * TSEC
  */
 #define CONFIG_TSEC_ENET	/* TSEC ethernet support */
-#define CFG_TSEC1_OFFSET	0x24000
-#define CFG_TSEC1		(CFG_IMMR+CFG_TSEC1_OFFSET)
-#define CFG_TSEC2_OFFSET	0x25000
-#define CFG_TSEC2		(CFG_IMMR+CFG_TSEC2_OFFSET)
+#define CONFIG_SYS_TSEC1_OFFSET	0x24000
+#define CONFIG_SYS_TSEC1		(CONFIG_SYS_IMMR+CONFIG_SYS_TSEC1_OFFSET)
+#define CONFIG_SYS_TSEC2_OFFSET	0x25000
+#define CONFIG_SYS_TSEC2		(CONFIG_SYS_IMMR+CONFIG_SYS_TSEC2_OFFSET)
 
 /*
  * TSEC ethernet configuration
@@ -356,15 +357,15 @@
 #define CONFIG_LIBATA
 #define CONFIG_FSL_SATA
 
-#define CFG_SATA_MAX_DEVICE	2
+#define CONFIG_SYS_SATA_MAX_DEVICE	2
 #define CONFIG_SATA1
-#define CFG_SATA1_OFFSET	0x18000
-#define CFG_SATA1		(CFG_IMMR + CFG_SATA1_OFFSET)
-#define CFG_SATA1_FLAGS		FLAGS_DMA
+#define CONFIG_SYS_SATA1_OFFSET	0x18000
+#define CONFIG_SYS_SATA1		(CONFIG_SYS_IMMR + CONFIG_SYS_SATA1_OFFSET)
+#define CONFIG_SYS_SATA1_FLAGS		FLAGS_DMA
 #define CONFIG_SATA2
-#define CFG_SATA2_OFFSET	0x19000
-#define CFG_SATA2		(CFG_IMMR + CFG_SATA2_OFFSET)
-#define CFG_SATA2_FLAGS		FLAGS_DMA
+#define CONFIG_SYS_SATA2_OFFSET	0x19000
+#define CONFIG_SYS_SATA2		(CONFIG_SYS_IMMR + CONFIG_SYS_SATA2_OFFSET)
+#define CONFIG_SYS_SATA2_FLAGS		FLAGS_DMA
 
 #ifdef CONFIG_FSL_SATA
 #define CONFIG_LBA48
@@ -376,20 +377,20 @@
 /*
  * Environment
  */
-#ifndef CFG_RAMBOOT
-	#define CFG_ENV_IS_IN_FLASH	1
-	#define CFG_ENV_ADDR		(CFG_MONITOR_BASE + CFG_MONITOR_LEN)
-	#define CFG_ENV_SECT_SIZE	0x10000 /* 64K(one sector) for env */
-	#define CFG_ENV_SIZE		0x2000
+#ifndef CONFIG_SYS_RAMBOOT
+	#define CONFIG_ENV_IS_IN_FLASH	1
+	#define CONFIG_ENV_ADDR		(CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)
+	#define CONFIG_ENV_SECT_SIZE	0x10000 /* 64K(one sector) for env */
+	#define CONFIG_ENV_SIZE		0x2000
 #else
-	#define CFG_NO_FLASH		1	/* Flash is not usable now */
-	#define CFG_ENV_IS_NOWHERE	1	/* Store ENV in memory only */
-	#define CFG_ENV_ADDR		(CFG_MONITOR_BASE - 0x1000)
-	#define CFG_ENV_SIZE		0x2000
+	#define CONFIG_SYS_NO_FLASH		1	/* Flash is not usable now */
+	#define CONFIG_ENV_IS_NOWHERE	1	/* Store ENV in memory only */
+	#define CONFIG_ENV_ADDR		(CONFIG_SYS_MONITOR_BASE - 0x1000)
+	#define CONFIG_ENV_SIZE		0x2000
 #endif
 
 #define CONFIG_LOADS_ECHO	1	/* echo on for serial download */
-#define CFG_LOADS_BAUD_CHANGE	1	/* allow baudrate change */
+#define CONFIG_SYS_LOADS_BAUD_CHANGE	1	/* allow baudrate change */
 
 /*
  * BOOTP options
@@ -410,7 +411,7 @@
 #define CONFIG_CMD_DATE
 #define CONFIG_CMD_PCI
 
-#if defined(CFG_RAMBOOT)
+#if defined(CONFIG_SYS_RAMBOOT)
     #undef CONFIG_CMD_ENV
     #undef CONFIG_CMD_LOADS
 #endif
@@ -422,35 +423,35 @@
 /*
  * Miscellaneous configurable options
  */
-#define CFG_LONGHELP		/* undef to save memory */
-#define CFG_LOAD_ADDR		0x2000000 /* default load address */
-#define CFG_PROMPT		"=> "	/* Monitor Command Prompt */
+#define CONFIG_SYS_LONGHELP		/* undef to save memory */
+#define CONFIG_SYS_LOAD_ADDR		0x2000000 /* default load address */
+#define CONFIG_SYS_PROMPT		"=> "	/* Monitor Command Prompt */
 
 #if defined(CONFIG_CMD_KGDB)
-	#define CFG_CBSIZE	1024 /* Console I/O Buffer Size */
+	#define CONFIG_SYS_CBSIZE	1024 /* Console I/O Buffer Size */
 #else
-	#define CFG_CBSIZE	256 /* Console I/O Buffer Size */
+	#define CONFIG_SYS_CBSIZE	256 /* Console I/O Buffer Size */
 #endif
 
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define CFG_MAXARGS	16		/* max number of command args */
-#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size */
-#define CFG_HZ		1000		/* decrementer freq: 1ms ticks */
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS	16		/* max number of command args */
+#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size */
+#define CONFIG_SYS_HZ		1000		/* decrementer freq: 1ms ticks */
 
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define CFG_BOOTMAPSZ		(8 << 20) /* Initial Memory map for Linux */
+#define CONFIG_SYS_BOOTMAPSZ		(8 << 20) /* Initial Memory map for Linux */
 
 /*
  * Core HID Setup
  */
-#define CFG_HID0_INIT		0x000000000
-#define CFG_HID0_FINAL		(HID0_ENABLE_MACHINE_CHECK | \
+#define CONFIG_SYS_HID0_INIT		0x000000000
+#define CONFIG_SYS_HID0_FINAL		(HID0_ENABLE_MACHINE_CHECK | \
 				 HID0_ENABLE_DYNAMIC_POWER_MANAGMENT)
-#define CFG_HID2		HID2_HBE
+#define CONFIG_SYS_HID2		HID2_HBE
 
 /*
  * MMU Setup
@@ -458,53 +459,53 @@
 #define CONFIG_HIGH_BATS	1	/* High BATs supported */
 
 /* DDR: cache cacheable */
-#define CFG_IBAT0L	(CFG_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
-#define CFG_IBAT0U	(CFG_SDRAM_BASE | BATU_BL_128M | BATU_VS | BATU_VP)
-#define CFG_DBAT0L	CFG_IBAT0L
-#define CFG_DBAT0U	CFG_IBAT0U
+#define CONFIG_SYS_IBAT0L	(CONFIG_SYS_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
+#define CONFIG_SYS_IBAT0U	(CONFIG_SYS_SDRAM_BASE | BATU_BL_128M | BATU_VS | BATU_VP)
+#define CONFIG_SYS_DBAT0L	CONFIG_SYS_IBAT0L
+#define CONFIG_SYS_DBAT0U	CONFIG_SYS_IBAT0U
 
 /* IMMRBAR, PCI IO and NAND: cache-inhibit and guarded */
-#define CFG_IBAT1L	(CFG_IMMR | BATL_PP_10 | \
+#define CONFIG_SYS_IBAT1L	(CONFIG_SYS_IMMR | BATL_PP_10 | \
 			BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
-#define CFG_IBAT1U	(CFG_IMMR | BATU_BL_8M | BATU_VS | BATU_VP)
-#define CFG_DBAT1L	CFG_IBAT1L
-#define CFG_DBAT1U	CFG_IBAT1U
+#define CONFIG_SYS_IBAT1U	(CONFIG_SYS_IMMR | BATU_BL_8M | BATU_VS | BATU_VP)
+#define CONFIG_SYS_DBAT1L	CONFIG_SYS_IBAT1L
+#define CONFIG_SYS_DBAT1U	CONFIG_SYS_IBAT1U
 
 /* FLASH: icache cacheable, but dcache-inhibit and guarded */
-#define CFG_IBAT2L	(CFG_FLASH_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
-#define CFG_IBAT2U	(CFG_FLASH_BASE | BATU_BL_8M | BATU_VS | BATU_VP)
-#define CFG_DBAT2L	(CFG_FLASH_BASE | BATL_PP_10 | \
+#define CONFIG_SYS_IBAT2L	(CONFIG_SYS_FLASH_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
+#define CONFIG_SYS_IBAT2U	(CONFIG_SYS_FLASH_BASE | BATU_BL_8M | BATU_VS | BATU_VP)
+#define CONFIG_SYS_DBAT2L	(CONFIG_SYS_FLASH_BASE | BATL_PP_10 | \
 			BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
-#define CFG_DBAT2U	CFG_IBAT2U
+#define CONFIG_SYS_DBAT2U	CONFIG_SYS_IBAT2U
 
 /* Stack in dcache: cacheable, no memory coherence */
-#define CFG_IBAT3L	(CFG_INIT_RAM_ADDR | BATL_PP_10)
-#define CFG_IBAT3U	(CFG_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP)
-#define CFG_DBAT3L	CFG_IBAT3L
-#define CFG_DBAT3U	CFG_IBAT3U
+#define CONFIG_SYS_IBAT3L	(CONFIG_SYS_INIT_RAM_ADDR | BATL_PP_10)
+#define CONFIG_SYS_IBAT3U	(CONFIG_SYS_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP)
+#define CONFIG_SYS_DBAT3L	CONFIG_SYS_IBAT3L
+#define CONFIG_SYS_DBAT3U	CONFIG_SYS_IBAT3U
 
 /* PCI MEM space: cacheable */
-#define CFG_IBAT4L	(CFG_PCI_MEM_PHYS | BATL_PP_10 | BATL_MEMCOHERENCE)
-#define CFG_IBAT4U	(CFG_PCI_MEM_PHYS | BATU_BL_256M | BATU_VS | BATU_VP)
-#define CFG_DBAT4L	CFG_IBAT4L
-#define CFG_DBAT4U	CFG_IBAT4U
+#define CONFIG_SYS_IBAT4L	(CONFIG_SYS_PCI_MEM_PHYS | BATL_PP_10 | BATL_MEMCOHERENCE)
+#define CONFIG_SYS_IBAT4U	(CONFIG_SYS_PCI_MEM_PHYS | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CONFIG_SYS_DBAT4L	CONFIG_SYS_IBAT4L
+#define CONFIG_SYS_DBAT4U	CONFIG_SYS_IBAT4U
 
 /* PCI MMIO space: cache-inhibit and guarded */
-#define CFG_IBAT5L	(CFG_PCI_MMIO_PHYS | BATL_PP_10 | \
+#define CONFIG_SYS_IBAT5L	(CONFIG_SYS_PCI_MMIO_PHYS | BATL_PP_10 | \
 			BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
-#define CFG_IBAT5U	(CFG_PCI_MMIO_PHYS | BATU_BL_256M | BATU_VS | BATU_VP)
-#define CFG_DBAT5L	CFG_IBAT5L
-#define CFG_DBAT5U	CFG_IBAT5U
-
-#define CFG_IBAT6L	0
-#define CFG_IBAT6U	0
-#define CFG_DBAT6L	CFG_IBAT6L
-#define CFG_DBAT6U	CFG_IBAT6U
-
-#define CFG_IBAT7L	0
-#define CFG_IBAT7U	0
-#define CFG_DBAT7L	CFG_IBAT7L
-#define CFG_DBAT7U	CFG_IBAT7U
+#define CONFIG_SYS_IBAT5U	(CONFIG_SYS_PCI_MMIO_PHYS | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CONFIG_SYS_DBAT5L	CONFIG_SYS_IBAT5L
+#define CONFIG_SYS_DBAT5U	CONFIG_SYS_IBAT5U
+
+#define CONFIG_SYS_IBAT6L	0
+#define CONFIG_SYS_IBAT6U	0
+#define CONFIG_SYS_DBAT6L	CONFIG_SYS_IBAT6L
+#define CONFIG_SYS_DBAT6U	CONFIG_SYS_IBAT6U
+
+#define CONFIG_SYS_IBAT7L	0
+#define CONFIG_SYS_IBAT7U	0
+#define CONFIG_SYS_DBAT7L	CONFIG_SYS_IBAT7L
+#define CONFIG_SYS_DBAT7U	CONFIG_SYS_IBAT7U
 
 /*
  * Internal Definitions
diff --git a/include/configs/MPC8323ERDB.h b/include/configs/MPC8323ERDB.h
index 94b3d5a33..c6ac91a53 100644
--- a/include/configs/MPC8323ERDB.h
+++ b/include/configs/MPC8323ERDB.h
@@ -32,7 +32,7 @@
 /*
  * Hardware Reset Configuration Word
  */
-#define CFG_HRCW_LOW (\
+#define CONFIG_SYS_HRCW_LOW (\
 	HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\
 	HRCWL_DDR_TO_SCB_CLK_2X1 |\
 	HRCWL_VCO_1X2 |\
@@ -42,7 +42,7 @@
 	HRCWL_CE_PLL_DIV_1X1 |\
 	HRCWL_CE_TO_PLL_1X3)
 
-#define CFG_HRCW_HIGH (\
+#define CONFIG_SYS_HRCW_HIGH (\
 	HRCWH_PCI_HOST |\
 	HRCWH_PCI1_ARBITER_ENABLE |\
 	HRCWH_CORE_ENABLE |\
@@ -56,29 +56,29 @@
 /*
  * System IO Config
  */
-#define CFG_SICRL		0x00000000
+#define CONFIG_SYS_SICRL		0x00000000
 
 #define CONFIG_BOARD_EARLY_INIT_F	/* call board_pre_init */
 
 /*
  * IMMR new address
  */
-#define CFG_IMMR		0xE0000000
+#define CONFIG_SYS_IMMR		0xE0000000
 
 /*
  * System performance
  */
-#define CFG_ACR_PIPE_DEP	3	/* Arbiter pipeline depth (0-3) */
-#define CFG_ACR_RPTCNT		3	/* Arbiter repeat count (0-7) */
-#define CFG_SPCR_OPT		1	/* (0-1) Optimize transactions between  CSB and the SEC and QUICC Engine block */
+#define CONFIG_SYS_ACR_PIPE_DEP	3	/* Arbiter pipeline depth (0-3) */
+#define CONFIG_SYS_ACR_RPTCNT		3	/* Arbiter repeat count (0-7) */
+#define CONFIG_SYS_SPCR_OPT		1	/* (0-1) Optimize transactions between  CSB and the SEC and QUICC Engine block */
 
 /*
  * DDR Setup
  */
-#define CFG_DDR_BASE		0x00000000	/* DDR is system memory */
-#define CFG_SDRAM_BASE		CFG_DDR_BASE
-#define CFG_DDR_SDRAM_BASE	CFG_DDR_BASE
-#define CFG_DDRCDR		0x73000002	/* DDR II voltage is 1.8V */
+#define CONFIG_SYS_DDR_BASE		0x00000000	/* DDR is system memory */
+#define CONFIG_SYS_SDRAM_BASE		CONFIG_SYS_DDR_BASE
+#define CONFIG_SYS_DDR_SDRAM_BASE	CONFIG_SYS_DDR_BASE
+#define CONFIG_SYS_DDRCDR		0x73000002	/* DDR II voltage is 1.8V */
 
 #undef CONFIG_SPD_EEPROM
 #if defined(CONFIG_SPD_EEPROM)
@@ -88,12 +88,12 @@
 #else
 /* Manually set up DDR parameters
  */
-#define CFG_DDR_SIZE		64	/* MB */
-#define CFG_DDR_CS0_CONFIG	( CSCONFIG_EN \
+#define CONFIG_SYS_DDR_SIZE		64	/* MB */
+#define CONFIG_SYS_DDR_CS0_CONFIG	( CSCONFIG_EN \
 				| CSCONFIG_ODT_WR_ACS \
 				| CSCONFIG_ROW_BIT_13 | CSCONFIG_COL_BIT_9 )
 				/* 0x80010101 */
-#define CFG_DDR_TIMING_0	( ( 0 << TIMING_CFG0_RWT_SHIFT ) \
+#define CONFIG_SYS_DDR_TIMING_0	( ( 0 << TIMING_CFG0_RWT_SHIFT ) \
 				| ( 0 << TIMING_CFG0_WRT_SHIFT ) \
 				| ( 0 << TIMING_CFG0_RRT_SHIFT ) \
 				| ( 0 << TIMING_CFG0_WWT_SHIFT ) \
@@ -102,7 +102,7 @@
 				| ( 8 << TIMING_CFG0_ODT_PD_EXIT_SHIFT ) \
 				| ( 2 << TIMING_CFG0_MRS_CYC_SHIFT ) )
 				/* 0x00220802 */
-#define CFG_DDR_TIMING_1	( ( 2 << TIMING_CFG1_PRETOACT_SHIFT ) \
+#define CONFIG_SYS_DDR_TIMING_1	( ( 2 << TIMING_CFG1_PRETOACT_SHIFT ) \
 				| ( 6 << TIMING_CFG1_ACTTOPRE_SHIFT ) \
 				| ( 2 << TIMING_CFG1_ACTTORW_SHIFT ) \
 				| ( 5 << TIMING_CFG1_CASLAT_SHIFT ) \
@@ -111,7 +111,7 @@
 				| ( 2 << TIMING_CFG1_ACTTOACT_SHIFT ) \
 				| ( 2 << TIMING_CFG1_WRTORD_SHIFT ) )
 				/* 0x26253222 */
-#define CFG_DDR_TIMING_2	( ( 1 << TIMING_CFG2_ADD_LAT_SHIFT ) \
+#define CONFIG_SYS_DDR_TIMING_2	( ( 1 << TIMING_CFG2_ADD_LAT_SHIFT ) \
 				| (31 << TIMING_CFG2_CPO_SHIFT ) \
 				| ( 2 << TIMING_CFG2_WR_LAT_DELAY_SHIFT ) \
 				| ( 2 << TIMING_CFG2_RD_TO_PRE_SHIFT ) \
@@ -119,98 +119,99 @@
 				| ( 3 << TIMING_CFG2_CKE_PLS_SHIFT ) \
 				| ( 7 << TIMING_CFG2_FOUR_ACT_SHIFT) )
 				/* 0x1f9048c7 */
-#define CFG_DDR_TIMING_3	0x00000000
-#define CFG_DDR_CLK_CNTL	DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05
+#define CONFIG_SYS_DDR_TIMING_3	0x00000000
+#define CONFIG_SYS_DDR_CLK_CNTL	DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05
 				/* 0x02000000 */
-#define CFG_DDR_MODE		( ( 0x4448 << SDRAM_MODE_ESD_SHIFT ) \
+#define CONFIG_SYS_DDR_MODE		( ( 0x4448 << SDRAM_MODE_ESD_SHIFT ) \
 				| ( 0x0232 << SDRAM_MODE_SD_SHIFT ) )
 				/* 0x44480232 */
-#define CFG_DDR_MODE2		0x8000c000
-#define CFG_DDR_INTERVAL	( ( 800 << SDRAM_INTERVAL_REFINT_SHIFT ) \
+#define CONFIG_SYS_DDR_MODE2		0x8000c000
+#define CONFIG_SYS_DDR_INTERVAL	( ( 800 << SDRAM_INTERVAL_REFINT_SHIFT ) \
 				| ( 100 << SDRAM_INTERVAL_BSTOPRE_SHIFT ) )
 				/* 0x03200064 */
-#define CFG_DDR_CS0_BNDS	0x00000003
-#define CFG_DDR_SDRAM_CFG	( SDRAM_CFG_SREN \
+#define CONFIG_SYS_DDR_CS0_BNDS	0x00000003
+#define CONFIG_SYS_DDR_SDRAM_CFG	( SDRAM_CFG_SREN \
 				| SDRAM_CFG_SDRAM_TYPE_DDR2 \
 				| SDRAM_CFG_32_BE )
 				/* 0x43080000 */
-#define CFG_DDR_SDRAM_CFG2	0x00401000
+#define CONFIG_SYS_DDR_SDRAM_CFG2	0x00401000
 #endif
 
 /*
  * Memory test
  */
-#undef CFG_DRAM_TEST		/* memory test, takes time */
-#define CFG_MEMTEST_START	0x00030000	/* memtest region */
-#define CFG_MEMTEST_END		0x03f00000
+#undef CONFIG_SYS_DRAM_TEST		/* memory test, takes time */
+#define CONFIG_SYS_MEMTEST_START	0x00030000	/* memtest region */
+#define CONFIG_SYS_MEMTEST_END		0x03f00000
 
 /*
  * The reserved memory
  */
-#define CFG_MONITOR_BASE	TEXT_BASE	/* start of monitor */
+#define CONFIG_SYS_MONITOR_BASE	TEXT_BASE	/* start of monitor */
 
-#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
-#define CFG_RAMBOOT
+#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
+#define CONFIG_SYS_RAMBOOT
 #else
-#undef  CFG_RAMBOOT
+#undef  CONFIG_SYS_RAMBOOT
 #endif
 
-/* CFG_MONITOR_LEN must be a multiple of CFG_ENV_SECT_SIZE */
-#define CFG_MONITOR_LEN		(256 * 1024)	/* Reserve 256 kB for Mon */
-#define CFG_MALLOC_LEN		(128 * 1024)	/* Reserved for malloc */
+/* CONFIG_SYS_MONITOR_LEN must be a multiple of CONFIG_ENV_SECT_SIZE */
+#define CONFIG_SYS_MONITOR_LEN		(256 * 1024)	/* Reserve 256 kB for Mon */
+#define CONFIG_SYS_MALLOC_LEN		(128 * 1024)	/* Reserved for malloc */
 
 /*
  * Initial RAM Base Address Setup
  */
-#define CFG_INIT_RAM_LOCK	1
-#define CFG_INIT_RAM_ADDR	0xE6000000	/* Initial RAM address */
-#define CFG_INIT_RAM_END	0x1000		/* End of used area in RAM */
-#define CFG_GBL_DATA_SIZE	0x100		/* num bytes initial data */
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_RAM_LOCK	1
+#define CONFIG_SYS_INIT_RAM_ADDR	0xE6000000	/* Initial RAM address */
+#define CONFIG_SYS_INIT_RAM_END	0x1000		/* End of used area in RAM */
+#define CONFIG_SYS_GBL_DATA_SIZE	0x100		/* num bytes initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
 
 /*
  * Local Bus Configuration & Clock Setup
  */
-#define CFG_LCRR		(LCRR_DBYP | LCRR_CLKDIV_2)
-#define CFG_LBC_LBCR		0x00000000
+#define CONFIG_SYS_LCRR		(LCRR_DBYP | LCRR_CLKDIV_2)
+#define CONFIG_SYS_LBC_LBCR		0x00000000
 
 /*
  * FLASH on the Local Bus
  */
-#define CFG_FLASH_CFI		/* use the Common Flash Interface */
+#define CONFIG_SYS_FLASH_CFI		/* use the Common Flash Interface */
 #define CONFIG_FLASH_CFI_DRIVER	/* use the CFI driver */
-#define CFG_FLASH_BASE		0xFE000000	/* FLASH base address */
-#define CFG_FLASH_SIZE		16	/* FLASH size is 16M */
+#define CONFIG_SYS_FLASH_BASE		0xFE000000	/* FLASH base address */
+#define CONFIG_SYS_FLASH_SIZE		16	/* FLASH size is 16M */
+#define CONFIG_SYS_FLASH_PROTECTION	1		/* Use h/w Flash protection. */
 
-#define CFG_LBLAWBAR0_PRELIM	CFG_FLASH_BASE	/* Window base at flash base */
-#define CFG_LBLAWAR0_PRELIM	0x80000018	/* 32MB window size */
+#define CONFIG_SYS_LBLAWBAR0_PRELIM	CONFIG_SYS_FLASH_BASE	/* Window base at flash base */
+#define CONFIG_SYS_LBLAWAR0_PRELIM	0x80000018	/* 32MB window size */
 
-#define CFG_BR0_PRELIM	(CFG_FLASH_BASE |	/* Flash Base address */ \
+#define CONFIG_SYS_BR0_PRELIM	(CONFIG_SYS_FLASH_BASE |	/* Flash Base address */ \
 			(2 << BR_PS_SHIFT) |	/* 16 bit port size */ \
 			BR_V)			/* valid */
-#define CFG_OR0_PRELIM		0xfe006ff7	/* 16MB Flash size */
+#define CONFIG_SYS_OR0_PRELIM		0xfe006ff7	/* 16MB Flash size */
 
-#define CFG_MAX_FLASH_BANKS	1		/* number of banks */
-#define CFG_MAX_FLASH_SECT	128		/* sectors per device */
+#define CONFIG_SYS_MAX_FLASH_BANKS	1		/* number of banks */
+#define CONFIG_SYS_MAX_FLASH_SECT	128		/* sectors per device */
 
-#undef CFG_FLASH_CHECKSUM
+#undef CONFIG_SYS_FLASH_CHECKSUM
 
 /*
  * SDRAM on the Local Bus
  */
-#undef CFG_LB_SDRAM		/* The board has not SRDAM on local bus */
+#undef CONFIG_SYS_LB_SDRAM		/* The board has not SRDAM on local bus */
 
-#ifdef CFG_LB_SDRAM
-#define CFG_LBC_SDRAM_BASE	0xF0000000	/* SDRAM base address */
-#define CFG_LBC_SDRAM_SIZE	64		/* LBC SDRAM is 64MB */
+#ifdef CONFIG_SYS_LB_SDRAM
+#define CONFIG_SYS_LBC_SDRAM_BASE	0xF0000000	/* SDRAM base address */
+#define CONFIG_SYS_LBC_SDRAM_SIZE	64		/* LBC SDRAM is 64MB */
 
-#define CFG_LBLAWBAR2_PRELIM	CFG_LBC_SDRAM_BASE
-#define CFG_LBLAWAR2_PRELIM	0x80000019	/* 64MB */
+#define CONFIG_SYS_LBLAWBAR2_PRELIM	CONFIG_SYS_LBC_SDRAM_BASE
+#define CONFIG_SYS_LBLAWAR2_PRELIM	0x80000019	/* 64MB */
 
 /*local bus BR2, OR2 definition for SDRAM if soldered on the EPB board */
 /*
  * Base Register 2 and Option Register 2 configure SDRAM.
- * The SDRAM base address, CFG_LBC_SDRAM_BASE, is 0xf0000000.
+ * The SDRAM base address, CONFIG_SYS_LBC_SDRAM_BASE, is 0xf0000000.
  *
  * For BR2, need:
  *    Base address of 0xf0000000 = BR[0:16] = 1111 0000 0000 0000 0
@@ -222,14 +223,14 @@
  * 0    4    8    12   16   20   24   28
  * 1111 0000 0000 0000 0001 1000 0110 0001 = f0001861
  *
- * CFG_LBC_SDRAM_BASE should be masked and OR'ed into
+ * CONFIG_SYS_LBC_SDRAM_BASE should be masked and OR'ed into
  * the top 17 bits of BR2.
  */
 
-#define CFG_BR2_PRELIM	0xf0001861	/*Port size=32bit, MSEL=SDRAM */
+#define CONFIG_SYS_BR2_PRELIM	0xf0001861	/*Port size=32bit, MSEL=SDRAM */
 
 /*
- * The SDRAM size in MB, CFG_LBC_SDRAM_SIZE, is 64.
+ * The SDRAM size in MB, CONFIG_SYS_LBC_SDRAM_SIZE, is 64.
  *
  * For OR2, need:
  *    64MB mask for AM, OR2[0:7] = 1111 1100
@@ -242,68 +243,68 @@
  * 1111 1100 0000 0000 0110 1001 0000 0001 = fc006901
  */
 
-#define CFG_OR2_PRELIM	0xfc006901
+#define CONFIG_SYS_OR2_PRELIM	0xfc006901
 
-#define CFG_LBC_LSRT	0x32000000	/* LB sdram refresh timer, about 6us */
-#define CFG_LBC_MRTPR	0x20000000	/* LB refresh timer prescal, 266MHz/32 */
+#define CONFIG_SYS_LBC_LSRT	0x32000000	/* LB sdram refresh timer, about 6us */
+#define CONFIG_SYS_LBC_MRTPR	0x20000000	/* LB refresh timer prescal, 266MHz/32 */
 
 /*
  * LSDMR masks
  */
-#define CFG_LBC_LSDMR_OP_NORMAL	(0 << (31 - 4))
-#define CFG_LBC_LSDMR_OP_ARFRSH	(1 << (31 - 4))
-#define CFG_LBC_LSDMR_OP_SRFRSH	(2 << (31 - 4))
-#define CFG_LBC_LSDMR_OP_MRW	(3 << (31 - 4))
-#define CFG_LBC_LSDMR_OP_PRECH	(4 << (31 - 4))
-#define CFG_LBC_LSDMR_OP_PCHALL	(5 << (31 - 4))
-#define CFG_LBC_LSDMR_OP_ACTBNK	(6 << (31 - 4))
-#define CFG_LBC_LSDMR_OP_RWINV	(7 << (31 - 4))
+#define CONFIG_SYS_LBC_LSDMR_OP_NORMAL	(0 << (31 - 4))
+#define CONFIG_SYS_LBC_LSDMR_OP_ARFRSH	(1 << (31 - 4))
+#define CONFIG_SYS_LBC_LSDMR_OP_SRFRSH	(2 << (31 - 4))
+#define CONFIG_SYS_LBC_LSDMR_OP_MRW	(3 << (31 - 4))
+#define CONFIG_SYS_LBC_LSDMR_OP_PRECH	(4 << (31 - 4))
+#define CONFIG_SYS_LBC_LSDMR_OP_PCHALL	(5 << (31 - 4))
+#define CONFIG_SYS_LBC_LSDMR_OP_ACTBNK	(6 << (31 - 4))
+#define CONFIG_SYS_LBC_LSDMR_OP_RWINV	(7 << (31 - 4))
 
-#define CFG_LBC_LSDMR_COMMON	0x0063b723
+#define CONFIG_SYS_LBC_LSDMR_COMMON	0x0063b723
 
 /*
  * SDRAM Controller configuration sequence.
  */
-#define CFG_LBC_LSDMR_1		( CFG_LBC_LSDMR_COMMON \
-				| CFG_LBC_LSDMR_OP_PCHALL)
-#define CFG_LBC_LSDMR_2		( CFG_LBC_LSDMR_COMMON \
-				| CFG_LBC_LSDMR_OP_ARFRSH)
-#define CFG_LBC_LSDMR_3		( CFG_LBC_LSDMR_COMMON \
-				| CFG_LBC_LSDMR_OP_ARFRSH)
-#define CFG_LBC_LSDMR_4		( CFG_LBC_LSDMR_COMMON \
-				| CFG_LBC_LSDMR_OP_MRW)
-#define CFG_LBC_LSDMR_5		( CFG_LBC_LSDMR_COMMON \
-				| CFG_LBC_LSDMR_OP_NORMAL)
+#define CONFIG_SYS_LBC_LSDMR_1		( CONFIG_SYS_LBC_LSDMR_COMMON \
+				| CONFIG_SYS_LBC_LSDMR_OP_PCHALL)
+#define CONFIG_SYS_LBC_LSDMR_2		( CONFIG_SYS_LBC_LSDMR_COMMON \
+				| CONFIG_SYS_LBC_LSDMR_OP_ARFRSH)
+#define CONFIG_SYS_LBC_LSDMR_3		( CONFIG_SYS_LBC_LSDMR_COMMON \
+				| CONFIG_SYS_LBC_LSDMR_OP_ARFRSH)
+#define CONFIG_SYS_LBC_LSDMR_4		( CONFIG_SYS_LBC_LSDMR_COMMON \
+				| CONFIG_SYS_LBC_LSDMR_OP_MRW)
+#define CONFIG_SYS_LBC_LSDMR_5		( CONFIG_SYS_LBC_LSDMR_COMMON \
+				| CONFIG_SYS_LBC_LSDMR_OP_NORMAL)
 
 #endif
 
 /*
  * Windows to access PIB via local bus
  */
-#define CFG_LBLAWBAR3_PRELIM	0xf8008000	/* windows base 0xf8008000 */
-#define CFG_LBLAWAR3_PRELIM	0x8000000f	/* windows size 64KB */
+#define CONFIG_SYS_LBLAWBAR3_PRELIM	0xf8008000	/* windows base 0xf8008000 */
+#define CONFIG_SYS_LBLAWAR3_PRELIM	0x8000000f	/* windows size 64KB */
 
 /*
  * Serial Port
  */
 #define CONFIG_CONS_INDEX	1
 #undef CONFIG_SERIAL_SOFTWARE_FIFO
-#define CFG_NS16550
-#define CFG_NS16550_SERIAL
-#define CFG_NS16550_REG_SIZE	1
-#define CFG_NS16550_CLK		get_bus_freq(0)
+#define CONFIG_SYS_NS16550
+#define CONFIG_SYS_NS16550_SERIAL
+#define CONFIG_SYS_NS16550_REG_SIZE	1
+#define CONFIG_SYS_NS16550_CLK		get_bus_freq(0)
 
-#define CFG_BAUDRATE_TABLE  \
+#define CONFIG_SYS_BAUDRATE_TABLE  \
 	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200}
 
-#define CFG_NS16550_COM1	(CFG_IMMR+0x4500)
-#define CFG_NS16550_COM2	(CFG_IMMR+0x4600)
+#define CONFIG_SYS_NS16550_COM1	(CONFIG_SYS_IMMR+0x4500)
+#define CONFIG_SYS_NS16550_COM2	(CONFIG_SYS_IMMR+0x4600)
 
 #define CONFIG_CMDLINE_EDITING	1	/* add command line history */
 /* Use the HUSH parser */
-#define CFG_HUSH_PARSER
-#ifdef CFG_HUSH_PARSER
-#define CFG_PROMPT_HUSH_PS2 "> "
+#define CONFIG_SYS_HUSH_PARSER
+#ifdef CONFIG_SYS_HUSH_PARSER
+#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
 #endif
 
 /* pass open firmware flat tree */
@@ -315,33 +316,32 @@
 #define CONFIG_HARD_I2C		/* I2C with hardware support */
 #undef CONFIG_SOFT_I2C		/* I2C bit-banged */
 #define CONFIG_FSL_I2C
-#define CFG_I2C_SPEED	400000	/* I2C speed and slave address */
-#define CFG_I2C_SLAVE	0x7F
-#define CFG_I2C_NOPROBES	{0x51}	/* Don't probe these addrs */
-#define CFG_I2C_OFFSET	0x3000
+#define CONFIG_SYS_I2C_SPEED	400000	/* I2C speed and slave address */
+#define CONFIG_SYS_I2C_SLAVE	0x7F
+#define CONFIG_SYS_I2C_NOPROBES	{0x51}	/* Don't probe these addrs */
+#define CONFIG_SYS_I2C_OFFSET	0x3000
 
 /*
  * Config on-board EEPROM
  */
-#define CFG_I2C_EEPROM_ADDR		0x50
-#define CFG_I2C_EEPROM_ADDR_LEN		2
-#define CFG_EEPROM_PAGE_WRITE_BITS	6
-#define CFG_EEPROM_PAGE_WRITE_DELAY_MS	10
-#define CFG_EEPROM_PAGE_WRITE_ENABLE
+#define CONFIG_SYS_I2C_EEPROM_ADDR		0x50
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN		2
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS	6
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	10
 
 /*
  * General PCI
  * Addresses are mapped 1-1.
  */
-#define CFG_PCI1_MEM_BASE	0x80000000
-#define CFG_PCI1_MEM_PHYS	CFG_PCI1_MEM_BASE
-#define CFG_PCI1_MEM_SIZE	0x10000000	/* 256M */
-#define CFG_PCI1_MMIO_BASE	0x90000000
-#define CFG_PCI1_MMIO_PHYS	CFG_PCI1_MMIO_BASE
-#define CFG_PCI1_MMIO_SIZE	0x10000000	/* 256M */
-#define CFG_PCI1_IO_BASE		0xd0000000
-#define CFG_PCI1_IO_PHYS		CFG_PCI1_IO_BASE
-#define CFG_PCI1_IO_SIZE		0x04000000	/* 64M */
+#define CONFIG_SYS_PCI1_MEM_BASE	0x80000000
+#define CONFIG_SYS_PCI1_MEM_PHYS	CONFIG_SYS_PCI1_MEM_BASE
+#define CONFIG_SYS_PCI1_MEM_SIZE	0x10000000	/* 256M */
+#define CONFIG_SYS_PCI1_MMIO_BASE	0x90000000
+#define CONFIG_SYS_PCI1_MMIO_PHYS	CONFIG_SYS_PCI1_MMIO_BASE
+#define CONFIG_SYS_PCI1_MMIO_SIZE	0x10000000	/* 256M */
+#define CONFIG_SYS_PCI1_IO_BASE		0xd0000000
+#define CONFIG_SYS_PCI1_IO_PHYS		CONFIG_SYS_PCI1_IO_BASE
+#define CONFIG_SYS_PCI1_IO_SIZE		0x04000000	/* 64M */
 
 #ifdef CONFIG_PCI
 #define CONFIG_PCI_SKIP_HOST_BRIDGE
@@ -350,7 +350,7 @@
 
 #undef CONFIG_EEPRO100
 #undef CONFIG_PCI_SCAN_SHOW	/* show pci devices on startup */
-#define CFG_PCI_SUBSYS_VENDORID	0x1957	/* Freescale */
+#define CONFIG_SYS_PCI_SUBSYS_VENDORID	0x1957	/* Freescale */
 
 #endif	/* CONFIG_PCI */
 
@@ -368,42 +368,42 @@
 #define CONFIG_UEC_ETH1		/* ETH3 */
 
 #ifdef CONFIG_UEC_ETH1
-#define CFG_UEC1_UCC_NUM	2	/* UCC3 */
-#define CFG_UEC1_RX_CLK		QE_CLK9
-#define CFG_UEC1_TX_CLK		QE_CLK10
-#define CFG_UEC1_ETH_TYPE	FAST_ETH
-#define CFG_UEC1_PHY_ADDR	4
-#define CFG_UEC1_INTERFACE_MODE	ENET_100_MII
+#define CONFIG_SYS_UEC1_UCC_NUM	2	/* UCC3 */
+#define CONFIG_SYS_UEC1_RX_CLK		QE_CLK9
+#define CONFIG_SYS_UEC1_TX_CLK		QE_CLK10
+#define CONFIG_SYS_UEC1_ETH_TYPE	FAST_ETH
+#define CONFIG_SYS_UEC1_PHY_ADDR	4
+#define CONFIG_SYS_UEC1_INTERFACE_MODE	ENET_100_MII
 #endif
 
 #define CONFIG_UEC_ETH2		/* ETH4 */
 
 #ifdef CONFIG_UEC_ETH2
-#define CFG_UEC2_UCC_NUM	1	/* UCC2 */
-#define CFG_UEC2_RX_CLK		QE_CLK16
-#define CFG_UEC2_TX_CLK		QE_CLK3
-#define CFG_UEC2_ETH_TYPE	FAST_ETH
-#define CFG_UEC2_PHY_ADDR	0
-#define CFG_UEC2_INTERFACE_MODE	ENET_100_MII
+#define CONFIG_SYS_UEC2_UCC_NUM	1	/* UCC2 */
+#define CONFIG_SYS_UEC2_RX_CLK		QE_CLK16
+#define CONFIG_SYS_UEC2_TX_CLK		QE_CLK3
+#define CONFIG_SYS_UEC2_ETH_TYPE	FAST_ETH
+#define CONFIG_SYS_UEC2_PHY_ADDR	0
+#define CONFIG_SYS_UEC2_INTERFACE_MODE	ENET_100_MII
 #endif
 
 /*
  * Environment
  */
-#ifndef CFG_RAMBOOT
-	#define CFG_ENV_IS_IN_FLASH	1
-	#define CFG_ENV_ADDR		(CFG_MONITOR_BASE + CFG_MONITOR_LEN)
-	#define CFG_ENV_SECT_SIZE	0x20000
-	#define CFG_ENV_SIZE		0x2000
+#ifndef CONFIG_SYS_RAMBOOT
+	#define CONFIG_ENV_IS_IN_FLASH	1
+	#define CONFIG_ENV_ADDR		(CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)
+	#define CONFIG_ENV_SECT_SIZE	0x20000
+	#define CONFIG_ENV_SIZE		0x2000
 #else
-	#define CFG_NO_FLASH		1	/* Flash is not usable now */
-	#define CFG_ENV_IS_NOWHERE	1	/* Store ENV in memory only */
-	#define CFG_ENV_ADDR		(CFG_MONITOR_BASE - 0x1000)
-	#define CFG_ENV_SIZE		0x2000
+	#define CONFIG_SYS_NO_FLASH		1	/* Flash is not usable now */
+	#define CONFIG_ENV_IS_NOWHERE	1	/* Store ENV in memory only */
+	#define CONFIG_ENV_ADDR		(CONFIG_SYS_MONITOR_BASE - 0x1000)
+	#define CONFIG_ENV_SIZE		0x2000
 #endif
 
 #define CONFIG_LOADS_ECHO	1	/* echo on for serial download */
-#define CFG_LOADS_BAUD_CHANGE	1	/* allow baudrate change */
+#define CONFIG_SYS_LOADS_BAUD_CHANGE	1	/* allow baudrate change */
 
 /*
  * BOOTP options
@@ -426,7 +426,7 @@
 #if defined(CONFIG_PCI)
 	#define CONFIG_CMD_PCI
 #endif
-#if defined(CFG_RAMBOOT)
+#if defined(CONFIG_SYS_RAMBOOT)
 	#undef CONFIG_CMD_ENV
 	#undef CONFIG_CMD_LOADS
 #endif
@@ -436,34 +436,34 @@
 /*
  * Miscellaneous configurable options
  */
-#define CFG_LONGHELP		/* undef to save memory */
-#define CFG_LOAD_ADDR		0x2000000	/* default load address */
-#define CFG_PROMPT		"=> "	/* Monitor Command Prompt */
+#define CONFIG_SYS_LONGHELP		/* undef to save memory */
+#define CONFIG_SYS_LOAD_ADDR		0x2000000	/* default load address */
+#define CONFIG_SYS_PROMPT		"=> "	/* Monitor Command Prompt */
 
 #if (CONFIG_CMD_KGDB)
-	#define CFG_CBSIZE	1024	/* Console I/O Buffer Size */
+	#define CONFIG_SYS_CBSIZE	1024	/* Console I/O Buffer Size */
 #else
-	#define CFG_CBSIZE	256	/* Console I/O Buffer Size */
+	#define CONFIG_SYS_CBSIZE	256	/* Console I/O Buffer Size */
 #endif
 
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16)	/* Print Buffer Size */
-#define CFG_MAXARGS	16		/* max number of command args */
-#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size */
-#define CFG_HZ		1000		/* decrementer freq: 1ms ticks */
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)	/* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS	16		/* max number of command args */
+#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size */
+#define CONFIG_SYS_HZ		1000		/* decrementer freq: 1ms ticks */
 
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
+#define CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
 
 /*
  * Core HID Setup
  */
-#define CFG_HID0_INIT		0x000000000
-#define CFG_HID0_FINAL		HID0_ENABLE_MACHINE_CHECK
-#define CFG_HID2		HID2_HBE
+#define CONFIG_SYS_HID0_INIT		0x000000000
+#define CONFIG_SYS_HID0_FINAL		HID0_ENABLE_MACHINE_CHECK
+#define CONFIG_SYS_HID2		HID2_HBE
 
 /*
  * MMU Setup
@@ -471,64 +471,64 @@
 #define CONFIG_HIGH_BATS	1	/* High BATs supported */
 
 /* DDR: cache cacheable */
-#define CFG_IBAT0L	(CFG_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
-#define CFG_IBAT0U	(CFG_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
-#define CFG_DBAT0L	CFG_IBAT0L
-#define CFG_DBAT0U	CFG_IBAT0U
+#define CONFIG_SYS_IBAT0L	(CONFIG_SYS_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
+#define CONFIG_SYS_IBAT0U	(CONFIG_SYS_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CONFIG_SYS_DBAT0L	CONFIG_SYS_IBAT0L
+#define CONFIG_SYS_DBAT0U	CONFIG_SYS_IBAT0U
 
 /* IMMRBAR & PCI IO: cache-inhibit and guarded */
-#define CFG_IBAT1L	(CFG_IMMR | BATL_PP_10 | \
+#define CONFIG_SYS_IBAT1L	(CONFIG_SYS_IMMR | BATL_PP_10 | \
 			BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
-#define CFG_IBAT1U	(CFG_IMMR | BATU_BL_4M | BATU_VS | BATU_VP)
-#define CFG_DBAT1L	CFG_IBAT1L
-#define CFG_DBAT1U	CFG_IBAT1U
+#define CONFIG_SYS_IBAT1U	(CONFIG_SYS_IMMR | BATU_BL_4M | BATU_VS | BATU_VP)
+#define CONFIG_SYS_DBAT1L	CONFIG_SYS_IBAT1L
+#define CONFIG_SYS_DBAT1U	CONFIG_SYS_IBAT1U
 
 /* FLASH: icache cacheable, but dcache-inhibit and guarded */
-#define CFG_IBAT2L	(CFG_FLASH_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
-#define CFG_IBAT2U	(CFG_FLASH_BASE | BATU_BL_32M | BATU_VS | BATU_VP)
-#define CFG_DBAT2L	(CFG_FLASH_BASE | BATL_PP_10 | \
+#define CONFIG_SYS_IBAT2L	(CONFIG_SYS_FLASH_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
+#define CONFIG_SYS_IBAT2U	(CONFIG_SYS_FLASH_BASE | BATU_BL_32M | BATU_VS | BATU_VP)
+#define CONFIG_SYS_DBAT2L	(CONFIG_SYS_FLASH_BASE | BATL_PP_10 | \
 			BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
-#define CFG_DBAT2U	CFG_IBAT2U
+#define CONFIG_SYS_DBAT2U	CONFIG_SYS_IBAT2U
 
-#define CFG_IBAT3L	(0)
-#define CFG_IBAT3U	(0)
-#define CFG_DBAT3L	CFG_IBAT3L
-#define CFG_DBAT3U	CFG_IBAT3U
+#define CONFIG_SYS_IBAT3L	(0)
+#define CONFIG_SYS_IBAT3U	(0)
+#define CONFIG_SYS_DBAT3L	CONFIG_SYS_IBAT3L
+#define CONFIG_SYS_DBAT3U	CONFIG_SYS_IBAT3U
 
 /* Stack in dcache: cacheable, no memory coherence */
-#define CFG_IBAT4L	(CFG_INIT_RAM_ADDR | BATL_PP_10)
-#define CFG_IBAT4U	(CFG_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP)
-#define CFG_DBAT4L	CFG_IBAT4L
-#define CFG_DBAT4U	CFG_IBAT4U
+#define CONFIG_SYS_IBAT4L	(CONFIG_SYS_INIT_RAM_ADDR | BATL_PP_10)
+#define CONFIG_SYS_IBAT4U	(CONFIG_SYS_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP)
+#define CONFIG_SYS_DBAT4L	CONFIG_SYS_IBAT4L
+#define CONFIG_SYS_DBAT4U	CONFIG_SYS_IBAT4U
 
 #ifdef CONFIG_PCI
 /* PCI MEM space: cacheable */
-#define CFG_IBAT5L	(CFG_PCI1_MEM_PHYS | BATL_PP_10 | BATL_MEMCOHERENCE)
-#define CFG_IBAT5U	(CFG_PCI1_MEM_PHYS | BATU_BL_256M | BATU_VS | BATU_VP)
-#define CFG_DBAT5L	CFG_IBAT5L
-#define CFG_DBAT5U	CFG_IBAT5U
+#define CONFIG_SYS_IBAT5L	(CONFIG_SYS_PCI1_MEM_PHYS | BATL_PP_10 | BATL_MEMCOHERENCE)
+#define CONFIG_SYS_IBAT5U	(CONFIG_SYS_PCI1_MEM_PHYS | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CONFIG_SYS_DBAT5L	CONFIG_SYS_IBAT5L
+#define CONFIG_SYS_DBAT5U	CONFIG_SYS_IBAT5U
 /* PCI MMIO space: cache-inhibit and guarded */
-#define CFG_IBAT6L	(CFG_PCI1_MMIO_PHYS | BATL_PP_10 | \
+#define CONFIG_SYS_IBAT6L	(CONFIG_SYS_PCI1_MMIO_PHYS | BATL_PP_10 | \
 			BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
-#define CFG_IBAT6U	(CFG_PCI1_MMIO_PHYS | BATU_BL_256M | BATU_VS | BATU_VP)
-#define CFG_DBAT6L	CFG_IBAT6L
-#define CFG_DBAT6U	CFG_IBAT6U
+#define CONFIG_SYS_IBAT6U	(CONFIG_SYS_PCI1_MMIO_PHYS | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CONFIG_SYS_DBAT6L	CONFIG_SYS_IBAT6L
+#define CONFIG_SYS_DBAT6U	CONFIG_SYS_IBAT6U
 #else
-#define CFG_IBAT5L	(0)
-#define CFG_IBAT5U	(0)
-#define CFG_IBAT6L	(0)
-#define CFG_IBAT6U	(0)
-#define CFG_DBAT5L	CFG_IBAT5L
-#define CFG_DBAT5U	CFG_IBAT5U
-#define CFG_DBAT6L	CFG_IBAT6L
-#define CFG_DBAT6U	CFG_IBAT6U
+#define CONFIG_SYS_IBAT5L	(0)
+#define CONFIG_SYS_IBAT5U	(0)
+#define CONFIG_SYS_IBAT6L	(0)
+#define CONFIG_SYS_IBAT6U	(0)
+#define CONFIG_SYS_DBAT5L	CONFIG_SYS_IBAT5L
+#define CONFIG_SYS_DBAT5U	CONFIG_SYS_IBAT5U
+#define CONFIG_SYS_DBAT6L	CONFIG_SYS_IBAT6L
+#define CONFIG_SYS_DBAT6U	CONFIG_SYS_IBAT6U
 #endif
 
 /* Nothing in BAT7 */
-#define CFG_IBAT7L	(0)
-#define CFG_IBAT7U	(0)
-#define CFG_DBAT7L	CFG_IBAT7L
-#define CFG_DBAT7U	CFG_IBAT7U
+#define CONFIG_SYS_IBAT7L	(0)
+#define CONFIG_SYS_IBAT7U	(0)
+#define CONFIG_SYS_DBAT7L	CONFIG_SYS_IBAT7L
+#define CONFIG_SYS_DBAT7U	CONFIG_SYS_IBAT7U
 
 /*
  * Internal Definitions
@@ -553,8 +553,8 @@
 #define CONFIG_HAS_ETH1				/* add support for "eth1addr" */
 #define CONFIG_ETH1ADDR	00:04:9f:ef:03:02
 
-/* use mac_read_from_eeprom() to read ethaddr from I2C EEPROM (see CFG_I2C_EEPROM) */
-#define CFG_I2C_MAC_OFFSET	0x7f00	/* MAC address offset in I2C EEPROM */
+/* use mac_read_from_eeprom() to read ethaddr from I2C EEPROM (see CONFIG_SYS_I2C_EEPROM) */
+#define CONFIG_SYS_I2C_MAC_OFFSET	0x7f00	/* MAC address offset in I2C EEPROM */
 
 #define CONFIG_IPADDR		10.0.0.2
 #define CONFIG_SERVERIP		10.0.0.1
@@ -570,7 +570,7 @@
 #define CONFIG_FDTFILE		mpc832x_rdb.dtb
 
 #define CONFIG_LOADADDR		500000	/* default location for tftp and bootm */
-#define CONFIG_BOOTDELAY	-1	/* -1 disables auto-boot */
+#define CONFIG_BOOTDELAY	6	/* -1 disables auto-boot */
 #define CONFIG_BAUDRATE		115200
 
 #define XMK_STR(x)	#x
diff --git a/include/configs/MPC832XEMDS.h b/include/configs/MPC832XEMDS.h
index 401d0afc4..bc56e682a 100644
--- a/include/configs/MPC832XEMDS.h
+++ b/include/configs/MPC832XEMDS.h
@@ -47,7 +47,7 @@
 /*
  * Hardware Reset Configuration Word
  */
-#define CFG_HRCW_LOW (\
+#define CONFIG_SYS_HRCW_LOW (\
 	HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\
 	HRCWL_DDR_TO_SCB_CLK_2X1 |\
 	HRCWL_VCO_1X2 |\
@@ -58,7 +58,7 @@
 	HRCWL_CE_TO_PLL_1X3)
 
 #ifdef CONFIG_PCISLAVE
-#define CFG_HRCW_HIGH (\
+#define CONFIG_SYS_HRCW_HIGH (\
 	HRCWH_PCI_AGENT |\
 	HRCWH_PCI1_ARBITER_DISABLE |\
 	HRCWH_CORE_ENABLE |\
@@ -69,7 +69,7 @@
 	HRCWH_BIG_ENDIAN |\
 	HRCWH_LALE_NORMAL)
 #else
-#define CFG_HRCW_HIGH (\
+#define CONFIG_SYS_HRCW_HIGH (\
 	HRCWH_PCI_HOST |\
 	HRCWH_PCI1_ARBITER_ENABLE |\
 	HRCWH_CORE_ENABLE |\
@@ -84,7 +84,7 @@
 /*
  * System IO Config
  */
-#define CFG_SICRL		0x00000000
+#define CONFIG_SYS_SICRL		0x00000000
 
 #define CONFIG_BOARD_EARLY_INIT_F	/* call board_pre_init */
 #define CONFIG_BOARD_EARLY_INIT_R
@@ -92,15 +92,15 @@
 /*
  * IMMR new address
  */
-#define CFG_IMMR		0xE0000000
+#define CONFIG_SYS_IMMR		0xE0000000
 
 /*
  * DDR Setup
  */
-#define CFG_DDR_BASE		0x00000000	/* DDR is system memory */
-#define CFG_SDRAM_BASE		CFG_DDR_BASE
-#define CFG_DDR_SDRAM_BASE	CFG_DDR_BASE
-#define CFG_DDRCDR		0x73000002	/* DDR II voltage is 1.8V */
+#define CONFIG_SYS_DDR_BASE		0x00000000	/* DDR is system memory */
+#define CONFIG_SYS_SDRAM_BASE		CONFIG_SYS_DDR_BASE
+#define CONFIG_SYS_DDR_SDRAM_BASE	CONFIG_SYS_DDR_BASE
+#define CONFIG_SYS_DDRCDR		0x73000002	/* DDR II voltage is 1.8V */
 
 #undef CONFIG_SPD_EEPROM
 #if defined(CONFIG_SPD_EEPROM)
@@ -110,105 +110,106 @@
 #else
 /* Manually set up DDR parameters
  */
-#define CFG_DDR_SIZE		128	/* MB */
-#define CFG_DDR_CS0_CONFIG	0x80840102
-#define CFG_DDR_TIMING_0	0x00220802
-#define CFG_DDR_TIMING_1	0x3935d322
-#define CFG_DDR_TIMING_2	0x0f9048ca
-#define CFG_DDR_TIMING_3	0x00000000
-#define CFG_DDR_CLK_CNTL	0x02000000
-#define CFG_DDR_MODE		0x44400232
-#define CFG_DDR_MODE2		0x8000c000
-#define CFG_DDR_INTERVAL	0x03200064
-#define CFG_DDR_CS0_BNDS	0x00000007
-#define CFG_DDR_SDRAM_CFG	0x43080000
-#define CFG_DDR_SDRAM_CFG2	0x00401000
+#define CONFIG_SYS_DDR_SIZE		128	/* MB */
+#define CONFIG_SYS_DDR_CS0_CONFIG	0x80840102
+#define CONFIG_SYS_DDR_TIMING_0	0x00220802
+#define CONFIG_SYS_DDR_TIMING_1	0x3935d322
+#define CONFIG_SYS_DDR_TIMING_2	0x0f9048ca
+#define CONFIG_SYS_DDR_TIMING_3	0x00000000
+#define CONFIG_SYS_DDR_CLK_CNTL	0x02000000
+#define CONFIG_SYS_DDR_MODE		0x44400232
+#define CONFIG_SYS_DDR_MODE2		0x8000c000
+#define CONFIG_SYS_DDR_INTERVAL	0x03200064
+#define CONFIG_SYS_DDR_CS0_BNDS	0x00000007
+#define CONFIG_SYS_DDR_SDRAM_CFG	0x43080000
+#define CONFIG_SYS_DDR_SDRAM_CFG2	0x00401000
 #endif
 
 /*
  * Memory test
  */
-#undef CFG_DRAM_TEST		/* memory test, takes time */
-#define CFG_MEMTEST_START	0x00000000	/* memtest region */
-#define CFG_MEMTEST_END		0x00100000
+#undef CONFIG_SYS_DRAM_TEST		/* memory test, takes time */
+#define CONFIG_SYS_MEMTEST_START	0x00000000	/* memtest region */
+#define CONFIG_SYS_MEMTEST_END		0x00100000
 
 /*
  * The reserved memory
  */
-#define CFG_MONITOR_BASE	TEXT_BASE	/* start of monitor */
+#define CONFIG_SYS_MONITOR_BASE	TEXT_BASE	/* start of monitor */
 
-#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
-#define CFG_RAMBOOT
+#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
+#define CONFIG_SYS_RAMBOOT
 #else
-#undef  CFG_RAMBOOT
+#undef  CONFIG_SYS_RAMBOOT
 #endif
 
-/* CFG_MONITOR_LEN must be a multiple of CFG_ENV_SECT_SIZE */
-#define CFG_MONITOR_LEN		(256 * 1024)	/* Reserve 256 kB for Mon */
-#define CFG_MALLOC_LEN		(128 * 1024)	/* Reserved for malloc */
+/* CONFIG_SYS_MONITOR_LEN must be a multiple of CONFIG_ENV_SECT_SIZE */
+#define CONFIG_SYS_MONITOR_LEN		(256 * 1024)	/* Reserve 256 kB for Mon */
+#define CONFIG_SYS_MALLOC_LEN		(128 * 1024)	/* Reserved for malloc */
 
 /*
  * Initial RAM Base Address Setup
  */
-#define CFG_INIT_RAM_LOCK	1
-#define CFG_INIT_RAM_ADDR	0xE6000000	/* Initial RAM address */
-#define CFG_INIT_RAM_END	0x1000		/* End of used area in RAM */
-#define CFG_GBL_DATA_SIZE	0x100		/* num bytes initial data */
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_RAM_LOCK	1
+#define CONFIG_SYS_INIT_RAM_ADDR	0xE6000000	/* Initial RAM address */
+#define CONFIG_SYS_INIT_RAM_END	0x1000		/* End of used area in RAM */
+#define CONFIG_SYS_GBL_DATA_SIZE	0x100		/* num bytes initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
 
 /*
  * Local Bus Configuration & Clock Setup
  */
-#define CFG_LCRR		(LCRR_DBYP | LCRR_CLKDIV_2)
-#define CFG_LBC_LBCR		0x00000000
+#define CONFIG_SYS_LCRR		(LCRR_DBYP | LCRR_CLKDIV_2)
+#define CONFIG_SYS_LBC_LBCR		0x00000000
 
 /*
  * FLASH on the Local Bus
  */
-#define CFG_FLASH_CFI		/* use the Common Flash Interface */
+#define CONFIG_SYS_FLASH_CFI		/* use the Common Flash Interface */
 #define CONFIG_FLASH_CFI_DRIVER	/* use the CFI driver */
-#define CFG_FLASH_BASE		0xFE000000	/* FLASH base address */
-#define CFG_FLASH_SIZE		16	/* FLASH size is 16M */
+#define CONFIG_SYS_FLASH_BASE		0xFE000000	/* FLASH base address */
+#define CONFIG_SYS_FLASH_SIZE		16	/* FLASH size is 16M */
+#define CONFIG_SYS_FLASH_PROTECTION	1		/* Use h/w Flash protection. */
 
-#define CFG_LBLAWBAR0_PRELIM	CFG_FLASH_BASE	/* Window base at flash base */
-#define CFG_LBLAWAR0_PRELIM	0x80000018	/* 32MB window size */
+#define CONFIG_SYS_LBLAWBAR0_PRELIM	CONFIG_SYS_FLASH_BASE	/* Window base at flash base */
+#define CONFIG_SYS_LBLAWAR0_PRELIM	0x80000018	/* 32MB window size */
 
-#define CFG_BR0_PRELIM	(CFG_FLASH_BASE |	/* Flash Base address */ \
+#define CONFIG_SYS_BR0_PRELIM	(CONFIG_SYS_FLASH_BASE |	/* Flash Base address */ \
 			(2 << BR_PS_SHIFT) |	/* 16 bit port size */ \
 			BR_V)			/* valid */
-#define CFG_OR0_PRELIM		0xfe006ff7	/* 16MB Flash size */
+#define CONFIG_SYS_OR0_PRELIM		0xfe006ff7	/* 16MB Flash size */
 
-#define CFG_MAX_FLASH_BANKS	1		/* number of banks */
-#define CFG_MAX_FLASH_SECT	128		/* sectors per device */
+#define CONFIG_SYS_MAX_FLASH_BANKS	1		/* number of banks */
+#define CONFIG_SYS_MAX_FLASH_SECT	128		/* sectors per device */
 
-#undef CFG_FLASH_CHECKSUM
+#undef CONFIG_SYS_FLASH_CHECKSUM
 
 /*
  * BCSR on the Local Bus
  */
-#define CFG_BCSR		0xF8000000
-#define CFG_LBLAWBAR1_PRELIM	CFG_BCSR	/* Access window base at BCSR base */
-#define CFG_LBLAWAR1_PRELIM	0x8000000E	/* Access window size 32K */
+#define CONFIG_SYS_BCSR		0xF8000000
+#define CONFIG_SYS_LBLAWBAR1_PRELIM	CONFIG_SYS_BCSR	/* Access window base at BCSR base */
+#define CONFIG_SYS_LBLAWAR1_PRELIM	0x8000000E	/* Access window size 32K */
 
-#define CFG_BR1_PRELIM		(CFG_BCSR|0x00000801)	/* Port size=8bit, MSEL=GPCM */
-#define CFG_OR1_PRELIM		0xFFFFE9f7	/* length 32K */
+#define CONFIG_SYS_BR1_PRELIM		(CONFIG_SYS_BCSR|0x00000801)	/* Port size=8bit, MSEL=GPCM */
+#define CONFIG_SYS_OR1_PRELIM		0xFFFFE9f7	/* length 32K */
 
 /*
  * SDRAM on the Local Bus
  */
-#undef CFG_LB_SDRAM		/* The board has not SRDAM on local bus */
+#undef CONFIG_SYS_LB_SDRAM		/* The board has not SRDAM on local bus */
 
-#ifdef CFG_LB_SDRAM
-#define CFG_LBC_SDRAM_BASE	0xF0000000	/* SDRAM base address */
-#define CFG_LBC_SDRAM_SIZE	64		/* LBC SDRAM is 64MB */
+#ifdef CONFIG_SYS_LB_SDRAM
+#define CONFIG_SYS_LBC_SDRAM_BASE	0xF0000000	/* SDRAM base address */
+#define CONFIG_SYS_LBC_SDRAM_SIZE	64		/* LBC SDRAM is 64MB */
 
-#define CFG_LBLAWBAR2_PRELIM	CFG_LBC_SDRAM_BASE
-#define CFG_LBLAWAR2_PRELIM	0x80000019	/* 64MB */
+#define CONFIG_SYS_LBLAWBAR2_PRELIM	CONFIG_SYS_LBC_SDRAM_BASE
+#define CONFIG_SYS_LBLAWAR2_PRELIM	0x80000019	/* 64MB */
 
 /*local bus BR2, OR2 definition for SDRAM if soldered on the EPB board */
 /*
  * Base Register 2 and Option Register 2 configure SDRAM.
- * The SDRAM base address, CFG_LBC_SDRAM_BASE, is 0xf0000000.
+ * The SDRAM base address, CONFIG_SYS_LBC_SDRAM_BASE, is 0xf0000000.
  *
  * For BR2, need:
  *    Base address of 0xf0000000 = BR[0:16] = 1111 0000 0000 0000 0
@@ -220,14 +221,14 @@
  * 0    4    8    12   16   20   24   28
  * 1111 0000 0000 0000 0001 1000 0110 0001 = f0001861
  *
- * CFG_LBC_SDRAM_BASE should be masked and OR'ed into
+ * CONFIG_SYS_LBC_SDRAM_BASE should be masked and OR'ed into
  * the top 17 bits of BR2.
  */
 
-#define CFG_BR2_PRELIM	0xf0001861	/*Port size=32bit, MSEL=SDRAM */
+#define CONFIG_SYS_BR2_PRELIM	0xf0001861	/*Port size=32bit, MSEL=SDRAM */
 
 /*
- * The SDRAM size in MB, CFG_LBC_SDRAM_SIZE, is 64.
+ * The SDRAM size in MB, CONFIG_SYS_LBC_SDRAM_SIZE, is 64.
  *
  * For OR2, need:
  *    64MB mask for AM, OR2[0:7] = 1111 1100
@@ -240,80 +241,80 @@
  * 1111 1100 0000 0000 0110 1001 0000 0001 = fc006901
  */
 
-#define CFG_OR2_PRELIM	0xfc006901
+#define CONFIG_SYS_OR2_PRELIM	0xfc006901
 
-#define CFG_LBC_LSRT	0x32000000	/* LB sdram refresh timer, about 6us */
-#define CFG_LBC_MRTPR	0x20000000	/* LB refresh timer prescal, 266MHz/32 */
+#define CONFIG_SYS_LBC_LSRT	0x32000000	/* LB sdram refresh timer, about 6us */
+#define CONFIG_SYS_LBC_MRTPR	0x20000000	/* LB refresh timer prescal, 266MHz/32 */
 
 /*
  * LSDMR masks
  */
-#define CFG_LBC_LSDMR_OP_NORMAL	(0 << (31 - 4))
-#define CFG_LBC_LSDMR_OP_ARFRSH	(1 << (31 - 4))
-#define CFG_LBC_LSDMR_OP_SRFRSH	(2 << (31 - 4))
-#define CFG_LBC_LSDMR_OP_MRW	(3 << (31 - 4))
-#define CFG_LBC_LSDMR_OP_PRECH	(4 << (31 - 4))
-#define CFG_LBC_LSDMR_OP_PCHALL	(5 << (31 - 4))
-#define CFG_LBC_LSDMR_OP_ACTBNK	(6 << (31 - 4))
-#define CFG_LBC_LSDMR_OP_RWINV	(7 << (31 - 4))
+#define CONFIG_SYS_LBC_LSDMR_OP_NORMAL	(0 << (31 - 4))
+#define CONFIG_SYS_LBC_LSDMR_OP_ARFRSH	(1 << (31 - 4))
+#define CONFIG_SYS_LBC_LSDMR_OP_SRFRSH	(2 << (31 - 4))
+#define CONFIG_SYS_LBC_LSDMR_OP_MRW	(3 << (31 - 4))
+#define CONFIG_SYS_LBC_LSDMR_OP_PRECH	(4 << (31 - 4))
+#define CONFIG_SYS_LBC_LSDMR_OP_PCHALL	(5 << (31 - 4))
+#define CONFIG_SYS_LBC_LSDMR_OP_ACTBNK	(6 << (31 - 4))
+#define CONFIG_SYS_LBC_LSDMR_OP_RWINV	(7 << (31 - 4))
 
-#define CFG_LBC_LSDMR_COMMON	0x0063b723
+#define CONFIG_SYS_LBC_LSDMR_COMMON	0x0063b723
 
 /*
  * SDRAM Controller configuration sequence.
  */
-#define CFG_LBC_LSDMR_1		( CFG_LBC_LSDMR_COMMON \
-				| CFG_LBC_LSDMR_OP_PCHALL)
-#define CFG_LBC_LSDMR_2		( CFG_LBC_LSDMR_COMMON \
-				| CFG_LBC_LSDMR_OP_ARFRSH)
-#define CFG_LBC_LSDMR_3		( CFG_LBC_LSDMR_COMMON \
-				| CFG_LBC_LSDMR_OP_ARFRSH)
-#define CFG_LBC_LSDMR_4		( CFG_LBC_LSDMR_COMMON \
-				| CFG_LBC_LSDMR_OP_MRW)
-#define CFG_LBC_LSDMR_5		( CFG_LBC_LSDMR_COMMON \
-				| CFG_LBC_LSDMR_OP_NORMAL)
+#define CONFIG_SYS_LBC_LSDMR_1		( CONFIG_SYS_LBC_LSDMR_COMMON \
+				| CONFIG_SYS_LBC_LSDMR_OP_PCHALL)
+#define CONFIG_SYS_LBC_LSDMR_2		( CONFIG_SYS_LBC_LSDMR_COMMON \
+				| CONFIG_SYS_LBC_LSDMR_OP_ARFRSH)
+#define CONFIG_SYS_LBC_LSDMR_3		( CONFIG_SYS_LBC_LSDMR_COMMON \
+				| CONFIG_SYS_LBC_LSDMR_OP_ARFRSH)
+#define CONFIG_SYS_LBC_LSDMR_4		( CONFIG_SYS_LBC_LSDMR_COMMON \
+				| CONFIG_SYS_LBC_LSDMR_OP_MRW)
+#define CONFIG_SYS_LBC_LSDMR_5		( CONFIG_SYS_LBC_LSDMR_COMMON \
+				| CONFIG_SYS_LBC_LSDMR_OP_NORMAL)
 
 #endif
 
 /*
  * Windows to access PIB via local bus
  */
-#define CFG_LBLAWBAR3_PRELIM	0xf8008000	/* windows base 0xf8008000 */
-#define CFG_LBLAWAR3_PRELIM	0x8000000f	/* windows size 64KB */
+#define CONFIG_SYS_LBLAWBAR3_PRELIM	0xf8008000	/* windows base 0xf8008000 */
+#define CONFIG_SYS_LBLAWAR3_PRELIM	0x8000000f	/* windows size 64KB */
 
 /*
  * CS2 on Local Bus, to PIB
  */
-#define CFG_BR2_PRELIM	0xf8008801	/* CS2 base address at 0xf8008000 */
-#define CFG_OR2_PRELIM	0xffffe9f7	/* size 32KB, port size 8bit, GPCM */
+#define CONFIG_SYS_BR2_PRELIM	0xf8008801	/* CS2 base address at 0xf8008000 */
+#define CONFIG_SYS_OR2_PRELIM	0xffffe9f7	/* size 32KB, port size 8bit, GPCM */
 
 /*
  * CS3 on Local Bus, to PIB
  */
-#define CFG_BR3_PRELIM	0xf8010801	/* CS3 base address at 0xf8010000 */
-#define CFG_OR3_PRELIM	0xffffe9f7	/* size 32KB, port size 8bit, GPCM */
+#define CONFIG_SYS_BR3_PRELIM	0xf8010801	/* CS3 base address at 0xf8010000 */
+#define CONFIG_SYS_OR3_PRELIM	0xffffe9f7	/* size 32KB, port size 8bit, GPCM */
 
 /*
  * Serial Port
  */
 #define CONFIG_CONS_INDEX	1
 #undef CONFIG_SERIAL_SOFTWARE_FIFO
-#define CFG_NS16550
-#define CFG_NS16550_SERIAL
-#define CFG_NS16550_REG_SIZE	1
-#define CFG_NS16550_CLK		get_bus_freq(0)
+#define CONFIG_SYS_NS16550
+#define CONFIG_SYS_NS16550_SERIAL
+#define CONFIG_SYS_NS16550_REG_SIZE	1
+#define CONFIG_SYS_NS16550_CLK		get_bus_freq(0)
 
-#define CFG_BAUDRATE_TABLE  \
+#define CONFIG_SYS_BAUDRATE_TABLE  \
 	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200}
 
-#define CFG_NS16550_COM1	(CFG_IMMR+0x4500)
-#define CFG_NS16550_COM2	(CFG_IMMR+0x4600)
+#define CONFIG_SYS_NS16550_COM1	(CONFIG_SYS_IMMR+0x4500)
+#define CONFIG_SYS_NS16550_COM2	(CONFIG_SYS_IMMR+0x4600)
 
 #define CONFIG_CMDLINE_EDITING	1	/* add command line history	*/
 /* Use the HUSH parser */
-#define CFG_HUSH_PARSER
-#ifdef CFG_HUSH_PARSER
-#define CFG_PROMPT_HUSH_PS2 "> "
+#define CONFIG_SYS_HUSH_PARSER
+#ifdef CONFIG_SYS_HUSH_PARSER
+#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
 #endif
 
 /* pass open firmware flat tree */
@@ -325,34 +326,34 @@
 #define CONFIG_HARD_I2C		/* I2C with hardware support */
 #undef CONFIG_SOFT_I2C		/* I2C bit-banged */
 #define CONFIG_FSL_I2C
-#define CFG_I2C_SPEED	400000	/* I2C speed and slave address */
-#define CFG_I2C_SLAVE	0x7F
-#define CFG_I2C_NOPROBES	{0x51}	/* Don't probe these addrs */
-#define CFG_I2C_OFFSET	0x3000
+#define CONFIG_SYS_I2C_SPEED	400000	/* I2C speed and slave address */
+#define CONFIG_SYS_I2C_SLAVE	0x7F
+#define CONFIG_SYS_I2C_NOPROBES	{0x51}	/* Don't probe these addrs */
+#define CONFIG_SYS_I2C_OFFSET	0x3000
 
 /*
  * Config on-board RTC
  */
 #define CONFIG_RTC_DS1374		/* use ds1374 rtc via i2c */
-#define CFG_I2C_RTC_ADDR	0x68	/* at address 0x68 */
+#define CONFIG_SYS_I2C_RTC_ADDR	0x68	/* at address 0x68 */
 
 /*
  * General PCI
  * Addresses are mapped 1-1.
  */
-#define CFG_PCI_MEM_BASE	0x80000000
-#define CFG_PCI_MEM_PHYS	CFG_PCI_MEM_BASE
-#define CFG_PCI_MEM_SIZE	0x10000000	/* 256M */
-#define CFG_PCI_MMIO_BASE	0x90000000
-#define CFG_PCI_MMIO_PHYS	CFG_PCI_MMIO_BASE
-#define CFG_PCI_MMIO_SIZE	0x10000000	/* 256M */
-#define CFG_PCI_IO_BASE		0x00000000
-#define CFG_PCI_IO_PHYS		0xE0300000
-#define CFG_PCI_IO_SIZE		0x100000	/* 1M */
+#define CONFIG_SYS_PCI_MEM_BASE	0x80000000
+#define CONFIG_SYS_PCI_MEM_PHYS	CONFIG_SYS_PCI_MEM_BASE
+#define CONFIG_SYS_PCI_MEM_SIZE	0x10000000	/* 256M */
+#define CONFIG_SYS_PCI_MMIO_BASE	0x90000000
+#define CONFIG_SYS_PCI_MMIO_PHYS	CONFIG_SYS_PCI_MMIO_BASE
+#define CONFIG_SYS_PCI_MMIO_SIZE	0x10000000	/* 256M */
+#define CONFIG_SYS_PCI_IO_BASE		0x00000000
+#define CONFIG_SYS_PCI_IO_PHYS		0xE0300000
+#define CONFIG_SYS_PCI_IO_SIZE		0x100000	/* 1M */
 
-#define CFG_PCI_SLV_MEM_LOCAL	CFG_SDRAM_BASE
-#define CFG_PCI_SLV_MEM_BUS	0x00000000
-#define CFG_PCI_SLV_MEM_SIZE	0x80000000
+#define CONFIG_SYS_PCI_SLV_MEM_LOCAL	CONFIG_SYS_SDRAM_BASE
+#define CONFIG_SYS_PCI_SLV_MEM_BUS	0x00000000
+#define CONFIG_SYS_PCI_SLV_MEM_SIZE	0x80000000
 
 
 #ifdef CONFIG_PCI
@@ -362,7 +363,7 @@
 
 #undef CONFIG_EEPRO100
 #undef CONFIG_PCI_SCAN_SHOW	/* show pci devices on startup */
-#define CFG_PCI_SUBSYS_VENDORID	0x1957	/* Freescale */
+#define CONFIG_SYS_PCI_SUBSYS_VENDORID	0x1957	/* Freescale */
 
 #endif	/* CONFIG_PCI */
 
@@ -380,42 +381,42 @@
 #define CONFIG_UEC_ETH1		/* ETH3 */
 
 #ifdef CONFIG_UEC_ETH1
-#define CFG_UEC1_UCC_NUM	2	/* UCC3 */
-#define CFG_UEC1_RX_CLK		QE_CLK9
-#define CFG_UEC1_TX_CLK		QE_CLK10
-#define CFG_UEC1_ETH_TYPE	FAST_ETH
-#define CFG_UEC1_PHY_ADDR	3
-#define CFG_UEC1_INTERFACE_MODE	ENET_100_MII
+#define CONFIG_SYS_UEC1_UCC_NUM	2	/* UCC3 */
+#define CONFIG_SYS_UEC1_RX_CLK		QE_CLK9
+#define CONFIG_SYS_UEC1_TX_CLK		QE_CLK10
+#define CONFIG_SYS_UEC1_ETH_TYPE	FAST_ETH
+#define CONFIG_SYS_UEC1_PHY_ADDR	3
+#define CONFIG_SYS_UEC1_INTERFACE_MODE	ENET_100_MII
 #endif
 
 #define CONFIG_UEC_ETH2		/* ETH4 */
 
 #ifdef CONFIG_UEC_ETH2
-#define CFG_UEC2_UCC_NUM	3	/* UCC4 */
-#define CFG_UEC2_RX_CLK		QE_CLK7
-#define CFG_UEC2_TX_CLK		QE_CLK8
-#define CFG_UEC2_ETH_TYPE	FAST_ETH
-#define CFG_UEC2_PHY_ADDR	4
-#define CFG_UEC2_INTERFACE_MODE	ENET_100_MII
+#define CONFIG_SYS_UEC2_UCC_NUM	3	/* UCC4 */
+#define CONFIG_SYS_UEC2_RX_CLK		QE_CLK7
+#define CONFIG_SYS_UEC2_TX_CLK		QE_CLK8
+#define CONFIG_SYS_UEC2_ETH_TYPE	FAST_ETH
+#define CONFIG_SYS_UEC2_PHY_ADDR	4
+#define CONFIG_SYS_UEC2_INTERFACE_MODE	ENET_100_MII
 #endif
 
 /*
  * Environment
  */
-#ifndef CFG_RAMBOOT
-	#define CFG_ENV_IS_IN_FLASH	1
-	#define CFG_ENV_ADDR		(CFG_MONITOR_BASE + CFG_MONITOR_LEN)
-	#define CFG_ENV_SECT_SIZE	0x20000
-	#define CFG_ENV_SIZE		0x2000
+#ifndef CONFIG_SYS_RAMBOOT
+	#define CONFIG_ENV_IS_IN_FLASH	1
+	#define CONFIG_ENV_ADDR		(CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)
+	#define CONFIG_ENV_SECT_SIZE	0x20000
+	#define CONFIG_ENV_SIZE		0x2000
 #else
-	#define CFG_NO_FLASH		1	/* Flash is not usable now */
-	#define CFG_ENV_IS_NOWHERE	1	/* Store ENV in memory only */
-	#define CFG_ENV_ADDR		(CFG_MONITOR_BASE - 0x1000)
-	#define CFG_ENV_SIZE		0x2000
+	#define CONFIG_SYS_NO_FLASH		1	/* Flash is not usable now */
+	#define CONFIG_ENV_IS_NOWHERE	1	/* Store ENV in memory only */
+	#define CONFIG_ENV_ADDR		(CONFIG_SYS_MONITOR_BASE - 0x1000)
+	#define CONFIG_ENV_SIZE		0x2000
 #endif
 
 #define CONFIG_LOADS_ECHO	1	/* echo on for serial download */
-#define CFG_LOADS_BAUD_CHANGE	1	/* allow baudrate change */
+#define CONFIG_SYS_LOADS_BAUD_CHANGE	1	/* allow baudrate change */
 
 /*
  * BOOTP options
@@ -439,7 +440,7 @@
     #define CONFIG_CMD_PCI
 #endif
 
-#if defined(CFG_RAMBOOT)
+#if defined(CONFIG_SYS_RAMBOOT)
     #undef CONFIG_CMD_ENV
     #undef CONFIG_CMD_LOADS
 #endif
@@ -450,34 +451,34 @@
 /*
  * Miscellaneous configurable options
  */
-#define CFG_LONGHELP		/* undef to save memory */
-#define CFG_LOAD_ADDR		0x2000000	/* default load address */
-#define CFG_PROMPT		"=> "	/* Monitor Command Prompt */
+#define CONFIG_SYS_LONGHELP		/* undef to save memory */
+#define CONFIG_SYS_LOAD_ADDR		0x2000000	/* default load address */
+#define CONFIG_SYS_PROMPT		"=> "	/* Monitor Command Prompt */
 
 #if defined(CONFIG_CMD_KGDB)
-	#define CFG_CBSIZE	1024	/* Console I/O Buffer Size */
+	#define CONFIG_SYS_CBSIZE	1024	/* Console I/O Buffer Size */
 #else
-	#define CFG_CBSIZE	256	/* Console I/O Buffer Size */
+	#define CONFIG_SYS_CBSIZE	256	/* Console I/O Buffer Size */
 #endif
 
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16)	/* Print Buffer Size */
-#define CFG_MAXARGS	16		/* max number of command args */
-#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size */
-#define CFG_HZ		1000		/* decrementer freq: 1ms ticks */
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)	/* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS	16		/* max number of command args */
+#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size */
+#define CONFIG_SYS_HZ		1000		/* decrementer freq: 1ms ticks */
 
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
+#define CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
 
 /*
  * Core HID Setup
  */
-#define CFG_HID0_INIT		0x000000000
-#define CFG_HID0_FINAL		HID0_ENABLE_MACHINE_CHECK
-#define CFG_HID2		HID2_HBE
+#define CONFIG_SYS_HID0_INIT		0x000000000
+#define CONFIG_SYS_HID0_FINAL		HID0_ENABLE_MACHINE_CHECK
+#define CONFIG_SYS_HID2		HID2_HBE
 
 /*
  * MMU Setup
@@ -486,64 +487,64 @@
 #define CONFIG_HIGH_BATS	1	/* High BATs supported */
 
 /* DDR: cache cacheable */
-#define CFG_IBAT0L	(CFG_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
-#define CFG_IBAT0U	(CFG_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
-#define CFG_DBAT0L	CFG_IBAT0L
-#define CFG_DBAT0U	CFG_IBAT0U
+#define CONFIG_SYS_IBAT0L	(CONFIG_SYS_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
+#define CONFIG_SYS_IBAT0U	(CONFIG_SYS_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CONFIG_SYS_DBAT0L	CONFIG_SYS_IBAT0L
+#define CONFIG_SYS_DBAT0U	CONFIG_SYS_IBAT0U
 
 /* IMMRBAR & PCI IO: cache-inhibit and guarded */
-#define CFG_IBAT1L	(CFG_IMMR | BATL_PP_10 | \
+#define CONFIG_SYS_IBAT1L	(CONFIG_SYS_IMMR | BATL_PP_10 | \
 			BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
-#define CFG_IBAT1U	(CFG_IMMR | BATU_BL_4M | BATU_VS | BATU_VP)
-#define CFG_DBAT1L	CFG_IBAT1L
-#define CFG_DBAT1U	CFG_IBAT1U
+#define CONFIG_SYS_IBAT1U	(CONFIG_SYS_IMMR | BATU_BL_4M | BATU_VS | BATU_VP)
+#define CONFIG_SYS_DBAT1L	CONFIG_SYS_IBAT1L
+#define CONFIG_SYS_DBAT1U	CONFIG_SYS_IBAT1U
 
 /* BCSR: cache-inhibit and guarded */
-#define CFG_IBAT2L	(CFG_BCSR | BATL_PP_10 | \
+#define CONFIG_SYS_IBAT2L	(CONFIG_SYS_BCSR | BATL_PP_10 | \
 			BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
-#define CFG_IBAT2U	(CFG_BCSR | BATU_BL_128K | BATU_VS | BATU_VP)
-#define CFG_DBAT2L	CFG_IBAT2L
-#define CFG_DBAT2U	CFG_IBAT2U
+#define CONFIG_SYS_IBAT2U	(CONFIG_SYS_BCSR | BATU_BL_128K | BATU_VS | BATU_VP)
+#define CONFIG_SYS_DBAT2L	CONFIG_SYS_IBAT2L
+#define CONFIG_SYS_DBAT2U	CONFIG_SYS_IBAT2U
 
 /* FLASH: icache cacheable, but dcache-inhibit and guarded */
-#define CFG_IBAT3L	(CFG_FLASH_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
-#define CFG_IBAT3U	(CFG_FLASH_BASE | BATU_BL_32M | BATU_VS | BATU_VP)
-#define CFG_DBAT3L	(CFG_FLASH_BASE | BATL_PP_10 | \
+#define CONFIG_SYS_IBAT3L	(CONFIG_SYS_FLASH_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
+#define CONFIG_SYS_IBAT3U	(CONFIG_SYS_FLASH_BASE | BATU_BL_32M | BATU_VS | BATU_VP)
+#define CONFIG_SYS_DBAT3L	(CONFIG_SYS_FLASH_BASE | BATL_PP_10 | \
 			BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
-#define CFG_DBAT3U	CFG_IBAT3U
+#define CONFIG_SYS_DBAT3U	CONFIG_SYS_IBAT3U
 
-#define CFG_IBAT4L	(0)
-#define CFG_IBAT4U	(0)
-#define CFG_DBAT4L	CFG_IBAT4L
-#define CFG_DBAT4U	CFG_IBAT4U
+#define CONFIG_SYS_IBAT4L	(0)
+#define CONFIG_SYS_IBAT4U	(0)
+#define CONFIG_SYS_DBAT4L	CONFIG_SYS_IBAT4L
+#define CONFIG_SYS_DBAT4U	CONFIG_SYS_IBAT4U
 
 /* Stack in dcache: cacheable, no memory coherence */
-#define CFG_IBAT5L	(CFG_INIT_RAM_ADDR | BATL_PP_10)
-#define CFG_IBAT5U	(CFG_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP)
-#define CFG_DBAT5L	CFG_IBAT5L
-#define CFG_DBAT5U	CFG_IBAT5U
+#define CONFIG_SYS_IBAT5L	(CONFIG_SYS_INIT_RAM_ADDR | BATL_PP_10)
+#define CONFIG_SYS_IBAT5U	(CONFIG_SYS_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP)
+#define CONFIG_SYS_DBAT5L	CONFIG_SYS_IBAT5L
+#define CONFIG_SYS_DBAT5U	CONFIG_SYS_IBAT5U
 
 #ifdef CONFIG_PCI
 /* PCI MEM space: cacheable */
-#define CFG_IBAT6L	(CFG_PCI_MEM_PHYS | BATL_PP_10 | BATL_MEMCOHERENCE)
-#define CFG_IBAT6U	(CFG_PCI_MEM_PHYS | BATU_BL_256M | BATU_VS | BATU_VP)
-#define CFG_DBAT6L	CFG_IBAT6L
-#define CFG_DBAT6U	CFG_IBAT6U
+#define CONFIG_SYS_IBAT6L	(CONFIG_SYS_PCI_MEM_PHYS | BATL_PP_10 | BATL_MEMCOHERENCE)
+#define CONFIG_SYS_IBAT6U	(CONFIG_SYS_PCI_MEM_PHYS | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CONFIG_SYS_DBAT6L	CONFIG_SYS_IBAT6L
+#define CONFIG_SYS_DBAT6U	CONFIG_SYS_IBAT6U
 /* PCI MMIO space: cache-inhibit and guarded */
-#define CFG_IBAT7L	(CFG_PCI_MMIO_PHYS | BATL_PP_10 | \
+#define CONFIG_SYS_IBAT7L	(CONFIG_SYS_PCI_MMIO_PHYS | BATL_PP_10 | \
 			BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
-#define CFG_IBAT7U	(CFG_PCI_MMIO_PHYS | BATU_BL_256M | BATU_VS | BATU_VP)
-#define CFG_DBAT7L	CFG_IBAT7L
-#define CFG_DBAT7U	CFG_IBAT7U
+#define CONFIG_SYS_IBAT7U	(CONFIG_SYS_PCI_MMIO_PHYS | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CONFIG_SYS_DBAT7L	CONFIG_SYS_IBAT7L
+#define CONFIG_SYS_DBAT7U	CONFIG_SYS_IBAT7U
 #else
-#define CFG_IBAT6L	(0)
-#define CFG_IBAT6U	(0)
-#define CFG_IBAT7L	(0)
-#define CFG_IBAT7U	(0)
-#define CFG_DBAT6L	CFG_IBAT6L
-#define CFG_DBAT6U	CFG_IBAT6U
-#define CFG_DBAT7L	CFG_IBAT7L
-#define CFG_DBAT7U	CFG_IBAT7U
+#define CONFIG_SYS_IBAT6L	(0)
+#define CONFIG_SYS_IBAT6U	(0)
+#define CONFIG_SYS_IBAT7L	(0)
+#define CONFIG_SYS_IBAT7U	(0)
+#define CONFIG_SYS_DBAT6L	CONFIG_SYS_IBAT6L
+#define CONFIG_SYS_DBAT6U	CONFIG_SYS_IBAT6U
+#define CONFIG_SYS_DBAT7L	CONFIG_SYS_IBAT7L
+#define CONFIG_SYS_DBAT7U	CONFIG_SYS_IBAT7U
 #endif
 
 /*
diff --git a/include/configs/MPC8349EMDS.h b/include/configs/MPC8349EMDS.h
index c8870b54a..8e82aac7b 100644
--- a/include/configs/MPC8349EMDS.h
+++ b/include/configs/MPC8349EMDS.h
@@ -65,11 +65,11 @@
 
 #define CONFIG_BOARD_EARLY_INIT_F		/* call board_pre_init */
 
-#define CFG_IMMR		0xE0000000
+#define CONFIG_SYS_IMMR		0xE0000000
 
-#undef CFG_DRAM_TEST				/* memory test, takes time */
-#define CFG_MEMTEST_START	0x00000000      /* memtest region */
-#define CFG_MEMTEST_END		0x00100000
+#undef CONFIG_SYS_DRAM_TEST				/* memory test, takes time */
+#define CONFIG_SYS_MEMTEST_START	0x00000000      /* memtest region */
+#define CONFIG_SYS_MEMTEST_END		0x00100000
 
 /*
  * DDR Setup
@@ -90,17 +90,17 @@
  */
 #undef CONFIG_DDR_32BIT
 
-#define CFG_DDR_BASE		0x00000000	/* DDR is system memory*/
-#define CFG_SDRAM_BASE		CFG_DDR_BASE
-#define CFG_DDR_SDRAM_BASE	CFG_DDR_BASE
-#define CFG_DDR_SDRAM_CLK_CNTL	(DDR_SDRAM_CLK_CNTL_SS_EN | \
+#define CONFIG_SYS_DDR_BASE		0x00000000	/* DDR is system memory*/
+#define CONFIG_SYS_SDRAM_BASE		CONFIG_SYS_DDR_BASE
+#define CONFIG_SYS_DDR_SDRAM_BASE	CONFIG_SYS_DDR_BASE
+#define CONFIG_SYS_DDR_SDRAM_CLK_CNTL	(DDR_SDRAM_CLK_CNTL_SS_EN | \
 				DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05)
 #undef  CONFIG_DDR_2T_TIMING
 
 /*
  * DDRCDR - DDR Control Driver Register
  */
-#define CFG_DDRCDR_VALUE	0x80080001
+#define CONFIG_SYS_DDRCDR_VALUE	0x80080001
 
 #if defined(CONFIG_SPD_EEPROM)
 /*
@@ -111,34 +111,34 @@
 /*
  * Manually set up DDR parameters
  */
-#define CFG_DDR_SIZE		256		/* MB */
+#define CONFIG_SYS_DDR_SIZE		256		/* MB */
 #if defined(CONFIG_DDR_II)
-#define CFG_DDRCDR		0x80080001
-#define CFG_DDR_CS2_BNDS	0x0000000f
-#define CFG_DDR_CS2_CONFIG	0x80330102
-#define CFG_DDR_TIMING_0	0x00220802
-#define CFG_DDR_TIMING_1	0x38357322
-#define CFG_DDR_TIMING_2	0x2f9048c8
-#define CFG_DDR_TIMING_3	0x00000000
-#define CFG_DDR_CLK_CNTL	0x02000000
-#define CFG_DDR_MODE		0x47d00432
-#define CFG_DDR_MODE2		0x8000c000
-#define CFG_DDR_INTERVAL	0x03cf0080
-#define CFG_DDR_SDRAM_CFG	0x43000000
-#define CFG_DDR_SDRAM_CFG2	0x00401000
+#define CONFIG_SYS_DDRCDR		0x80080001
+#define CONFIG_SYS_DDR_CS2_BNDS	0x0000000f
+#define CONFIG_SYS_DDR_CS2_CONFIG	0x80330102
+#define CONFIG_SYS_DDR_TIMING_0	0x00220802
+#define CONFIG_SYS_DDR_TIMING_1	0x38357322
+#define CONFIG_SYS_DDR_TIMING_2	0x2f9048c8
+#define CONFIG_SYS_DDR_TIMING_3	0x00000000
+#define CONFIG_SYS_DDR_CLK_CNTL	0x02000000
+#define CONFIG_SYS_DDR_MODE		0x47d00432
+#define CONFIG_SYS_DDR_MODE2		0x8000c000
+#define CONFIG_SYS_DDR_INTERVAL	0x03cf0080
+#define CONFIG_SYS_DDR_SDRAM_CFG	0x43000000
+#define CONFIG_SYS_DDR_SDRAM_CFG2	0x00401000
 #else
-#define CFG_DDR_CONFIG		(CSCONFIG_EN | CSCONFIG_ROW_BIT_13 | CSCONFIG_COL_BIT_10)
-#define CFG_DDR_TIMING_1	0x36332321
-#define CFG_DDR_TIMING_2	0x00000800	/* P9-45,may need tuning */
-#define CFG_DDR_CONTROL		0xc2000000	/* unbuffered,no DYN_PWR */
-#define CFG_DDR_INTERVAL	0x04060100	/* autocharge,no open page */
+#define CONFIG_SYS_DDR_CONFIG		(CSCONFIG_EN | CSCONFIG_ROW_BIT_13 | CSCONFIG_COL_BIT_10)
+#define CONFIG_SYS_DDR_TIMING_1	0x36332321
+#define CONFIG_SYS_DDR_TIMING_2	0x00000800	/* P9-45,may need tuning */
+#define CONFIG_SYS_DDR_CONTROL		0xc2000000	/* unbuffered,no DYN_PWR */
+#define CONFIG_SYS_DDR_INTERVAL	0x04060100	/* autocharge,no open page */
 
 #if defined(CONFIG_DDR_32BIT)
 /* set burst length to 8 for 32-bit data path */
-#define CFG_DDR_MODE		0x00000023	/* DLL,normal,seq,4/2.5, 8 burst len */
+#define CONFIG_SYS_DDR_MODE		0x00000023	/* DLL,normal,seq,4/2.5, 8 burst len */
 #else
 /* the default burst length is 4 - for 64-bit data path */
-#define CFG_DDR_MODE		0x00000022	/* DLL,normal,seq,4/2.5, 4 burst len */
+#define CONFIG_SYS_DDR_MODE		0x00000022	/* DLL,normal,seq,4/2.5, 4 burst len */
 #endif
 #endif
 #endif
@@ -146,63 +146,63 @@
 /*
  * SDRAM on the Local Bus
  */
-#define CFG_LBC_SDRAM_BASE	0xF0000000	/* Localbus SDRAM */
-#define CFG_LBC_SDRAM_SIZE	64		/* LBC SDRAM is 64MB */
+#define CONFIG_SYS_LBC_SDRAM_BASE	0xF0000000	/* Localbus SDRAM */
+#define CONFIG_SYS_LBC_SDRAM_SIZE	64		/* LBC SDRAM is 64MB */
 
 /*
  * FLASH on the Local Bus
  */
-#define CFG_FLASH_CFI				/* use the Common Flash Interface */
+#define CONFIG_SYS_FLASH_CFI				/* use the Common Flash Interface */
 #define CONFIG_FLASH_CFI_DRIVER			/* use the CFI driver */
-#define CFG_FLASH_BASE		0xFE000000	/* start of FLASH   */
-#define CFG_FLASH_SIZE		32		/* max flash size in MB */
-/* #define CFG_FLASH_USE_BUFFER_WRITE */
+#define CONFIG_SYS_FLASH_BASE		0xFE000000	/* start of FLASH   */
+#define CONFIG_SYS_FLASH_SIZE		32		/* max flash size in MB */
+#define CONFIG_SYS_FLASH_PROTECTION	1		/* Use h/w Flash protection. */
+/* #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE */
 
-#define CFG_BR0_PRELIM		(CFG_FLASH_BASE |	/* flash Base address */ \
+#define CONFIG_SYS_BR0_PRELIM		(CONFIG_SYS_FLASH_BASE |	/* flash Base address */ \
 				(2 << BR_PS_SHIFT) |	/* 16 bit port size */	 \
 				BR_V)			/* valid */
-#define CFG_OR0_PRELIM		((~(CFG_FLASH_SIZE - 1) << 20) | OR_UPM_XAM | \
+#define CONFIG_SYS_OR0_PRELIM		((~(CONFIG_SYS_FLASH_SIZE - 1) << 20) | OR_UPM_XAM | \
 				OR_GPCM_CSNT | OR_GPCM_ACS_DIV2 | OR_GPCM_XACS | OR_GPCM_SCY_15 | \
 				OR_GPCM_TRLX | OR_GPCM_EHTR | OR_GPCM_EAD)
-#define CFG_LBLAWBAR0_PRELIM	CFG_FLASH_BASE	/* window base at flash base */
-#define CFG_LBLAWAR0_PRELIM	0x80000018	/* 32 MB window size */
+#define CONFIG_SYS_LBLAWBAR0_PRELIM	CONFIG_SYS_FLASH_BASE	/* window base at flash base */
+#define CONFIG_SYS_LBLAWAR0_PRELIM	0x80000018	/* 32 MB window size */
 
-#define CFG_MAX_FLASH_BANKS	1		/* number of banks */
-#define CFG_MAX_FLASH_SECT	256		/* max sectors per device */
+#define CONFIG_SYS_MAX_FLASH_BANKS	1		/* number of banks */
+#define CONFIG_SYS_MAX_FLASH_SECT	256		/* max sectors per device */
 
-#undef CFG_FLASH_CHECKSUM
-#define CFG_FLASH_ERASE_TOUT	60000	/* Flash Erase Timeout (ms) */
-#define CFG_FLASH_WRITE_TOUT	500	/* Flash Write Timeout (ms) */
+#undef CONFIG_SYS_FLASH_CHECKSUM
+#define CONFIG_SYS_FLASH_ERASE_TOUT	60000	/* Flash Erase Timeout (ms) */
+#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Flash Write Timeout (ms) */
 
-#define CFG_MID_FLASH_JUMP	0x7F000000
-#define CFG_MONITOR_BASE	TEXT_BASE	/* start of monitor */
+#define CONFIG_SYS_MID_FLASH_JUMP	0x7F000000
+#define CONFIG_SYS_MONITOR_BASE	TEXT_BASE	/* start of monitor */
 
-#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
-#define CFG_RAMBOOT
+#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
+#define CONFIG_SYS_RAMBOOT
 #else
-#undef  CFG_RAMBOOT
+#undef  CONFIG_SYS_RAMBOOT
 #endif
 
 /*
  * BCSR register on local bus 32KB, 8-bit wide for MDS config reg
  */
-#define CFG_BCSR		0xE2400000
-#define CFG_LBLAWBAR1_PRELIM	CFG_BCSR		/* Access window base at BCSR base */
-#define CFG_LBLAWAR1_PRELIM	0x8000000E		/* Access window size 32K */
-#define CFG_BR1_PRELIM		(CFG_BCSR|0x00000801)	/* Port-size=8bit, MSEL=GPCM */
-#define CFG_OR1_PRELIM		0xFFFFE8F0		/* length 32K */
+#define CONFIG_SYS_BCSR		0xE2400000
+#define CONFIG_SYS_LBLAWBAR1_PRELIM	CONFIG_SYS_BCSR		/* Access window base at BCSR base */
+#define CONFIG_SYS_LBLAWAR1_PRELIM	0x8000000E		/* Access window size 32K */
+#define CONFIG_SYS_BR1_PRELIM		(CONFIG_SYS_BCSR|0x00000801)	/* Port-size=8bit, MSEL=GPCM */
+#define CONFIG_SYS_OR1_PRELIM		0xFFFFE8F0		/* length 32K */
 
-#define CONFIG_L1_INIT_RAM
-#define CFG_INIT_RAM_LOCK	1
-#define CFG_INIT_RAM_ADDR	0xFD000000		/* Initial RAM address */
-#define CFG_INIT_RAM_END	0x1000			/* End of used area in RAM*/
+#define CONFIG_SYS_INIT_RAM_LOCK	1
+#define CONFIG_SYS_INIT_RAM_ADDR	0xFD000000		/* Initial RAM address */
+#define CONFIG_SYS_INIT_RAM_END	0x1000			/* End of used area in RAM*/
 
-#define CFG_GBL_DATA_SIZE	0x100			/* num bytes initial data */
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_GBL_DATA_SIZE	0x100			/* num bytes initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
-#define CFG_MONITOR_LEN		(256 * 1024)		/* Reserve 256 kB for Mon */
-#define CFG_MALLOC_LEN		(128 * 1024)		/* Reserved for malloc */
+#define CONFIG_SYS_MONITOR_LEN		(256 * 1024)		/* Reserve 256 kB for Mon */
+#define CONFIG_SYS_MALLOC_LEN		(128 * 1024)		/* Reserved for malloc */
 
 /*
  * Local Bus LCRR and LBCR regs
@@ -210,20 +210,20 @@
  * External Local Bus rate is
  *    CLKIN * HRCWL_CSB_TO_CLKIN / HRCWL_LCL_BUS_TO_SCB_CLK / LCRR_CLKDIV
  */
-#define CFG_LCRR	(LCRR_DBYP | LCRR_CLKDIV_4)
-#define CFG_LBC_LBCR	0x00000000
+#define CONFIG_SYS_LCRR	(LCRR_DBYP | LCRR_CLKDIV_4)
+#define CONFIG_SYS_LBC_LBCR	0x00000000
 
 /*
  * The MPC834xEA MDS for 834xE rev3.1 may not be assembled SDRAM memory.
- * if board has SRDAM on local bus, you can define CFG_LB_SDRAM
+ * if board has SRDAM on local bus, you can define CONFIG_SYS_LB_SDRAM
  */
-#undef CFG_LB_SDRAM
+#undef CONFIG_SYS_LB_SDRAM
 
-#ifdef CFG_LB_SDRAM
+#ifdef CONFIG_SYS_LB_SDRAM
 /* Local bus BR2, OR2 definition for SDRAM if soldered on the MDS board */
 /*
  * Base Register 2 and Option Register 2 configure SDRAM.
- * The SDRAM base address, CFG_LBC_SDRAM_BASE, is 0xf0000000.
+ * The SDRAM base address, CONFIG_SYS_LBC_SDRAM_BASE, is 0xf0000000.
  *
  * For BR2, need:
  *    Base address of 0xf0000000 = BR[0:16] = 1111 0000 0000 0000 0
@@ -235,16 +235,16 @@
  * 0    4    8    12   16   20   24   28
  * 1111 0000 0000 0000 0001 1000 0110 0001 = F0001861
  *
- * FIXME: CFG_LBC_SDRAM_BASE should be masked and OR'ed into
+ * FIXME: CONFIG_SYS_LBC_SDRAM_BASE should be masked and OR'ed into
  * FIXME: the top 17 bits of BR2.
  */
 
-#define CFG_BR2_PRELIM		0xF0001861 /* Port-size=32bit, MSEL=SDRAM */
-#define CFG_LBLAWBAR2_PRELIM	0xF0000000
-#define CFG_LBLAWAR2_PRELIM	0x80000019 /* 64M */
+#define CONFIG_SYS_BR2_PRELIM		0xF0001861 /* Port-size=32bit, MSEL=SDRAM */
+#define CONFIG_SYS_LBLAWBAR2_PRELIM	0xF0000000
+#define CONFIG_SYS_LBLAWAR2_PRELIM	0x80000019 /* 64M */
 
 /*
- * The SDRAM size in MB, CFG_LBC_SDRAM_SIZE, is 64.
+ * The SDRAM size in MB, CONFIG_SYS_LBC_SDRAM_SIZE, is 64.
  *
  * For OR2, need:
  *    64MB mask for AM, OR2[0:7] = 1111 1100
@@ -257,65 +257,65 @@
  * 1111 1100 0000 0000 0110 1001 0000 0001 = FC006901
  */
 
-#define CFG_OR2_PRELIM	0xFC006901
+#define CONFIG_SYS_OR2_PRELIM	0xFC006901
 
-#define CFG_LBC_LSRT	0x32000000    /* LB sdram refresh timer, about 6us */
-#define CFG_LBC_MRTPR	0x20000000    /* LB refresh timer prescal, 266MHz/32 */
+#define CONFIG_SYS_LBC_LSRT	0x32000000    /* LB sdram refresh timer, about 6us */
+#define CONFIG_SYS_LBC_MRTPR	0x20000000    /* LB refresh timer prescal, 266MHz/32 */
 
 /*
  * LSDMR masks
  */
-#define CFG_LBC_LSDMR_RFEN	(1 << (31 -  1))
-#define CFG_LBC_LSDMR_BSMA1516	(3 << (31 - 10))
-#define CFG_LBC_LSDMR_BSMA1617	(4 << (31 - 10))
-#define CFG_LBC_LSDMR_RFCR5	(3 << (31 - 16))
-#define CFG_LBC_LSDMR_RFCR8	(5 << (31 - 16))
-#define CFG_LBC_LSDMR_RFCR16	(7 << (31 - 16))
-#define CFG_LBC_LSDMR_PRETOACT3	(3 << (31 - 19))
-#define CFG_LBC_LSDMR_PRETOACT6	(5 << (31 - 19))
-#define CFG_LBC_LSDMR_PRETOACT7	(7 << (31 - 19))
-#define CFG_LBC_LSDMR_ACTTORW3	(3 << (31 - 22))
-#define CFG_LBC_LSDMR_ACTTORW7	(7 << (31 - 22))
-#define CFG_LBC_LSDMR_ACTTORW6	(6 << (31 - 22))
-#define CFG_LBC_LSDMR_BL8	(1 << (31 - 23))
-#define CFG_LBC_LSDMR_WRC2	(2 << (31 - 27))
-#define CFG_LBC_LSDMR_WRC3	(3 << (31 - 27))
-#define CFG_LBC_LSDMR_WRC4	(0 << (31 - 27))
-#define CFG_LBC_LSDMR_BUFCMD	(1 << (31 - 29))
-#define CFG_LBC_LSDMR_CL3	(3 << (31 - 31))
-
-#define CFG_LBC_LSDMR_OP_NORMAL	(0 << (31 - 4))
-#define CFG_LBC_LSDMR_OP_ARFRSH	(1 << (31 - 4))
-#define CFG_LBC_LSDMR_OP_SRFRSH	(2 << (31 - 4))
-#define CFG_LBC_LSDMR_OP_MRW	(3 << (31 - 4))
-#define CFG_LBC_LSDMR_OP_PRECH	(4 << (31 - 4))
-#define CFG_LBC_LSDMR_OP_PCHALL	(5 << (31 - 4))
-#define CFG_LBC_LSDMR_OP_ACTBNK	(6 << (31 - 4))
-#define CFG_LBC_LSDMR_OP_RWINV	(7 << (31 - 4))
-
-#define CFG_LBC_LSDMR_COMMON    ( CFG_LBC_LSDMR_RFEN            \
-				| CFG_LBC_LSDMR_BSMA1516	\
-				| CFG_LBC_LSDMR_RFCR8		\
-				| CFG_LBC_LSDMR_PRETOACT6	\
-				| CFG_LBC_LSDMR_ACTTORW3	\
-				| CFG_LBC_LSDMR_BL8		\
-				| CFG_LBC_LSDMR_WRC3		\
-				| CFG_LBC_LSDMR_CL3		\
+#define CONFIG_SYS_LBC_LSDMR_RFEN	(1 << (31 -  1))
+#define CONFIG_SYS_LBC_LSDMR_BSMA1516	(3 << (31 - 10))
+#define CONFIG_SYS_LBC_LSDMR_BSMA1617	(4 << (31 - 10))
+#define CONFIG_SYS_LBC_LSDMR_RFCR5	(3 << (31 - 16))
+#define CONFIG_SYS_LBC_LSDMR_RFCR8	(5 << (31 - 16))
+#define CONFIG_SYS_LBC_LSDMR_RFCR16	(7 << (31 - 16))
+#define CONFIG_SYS_LBC_LSDMR_PRETOACT3	(3 << (31 - 19))
+#define CONFIG_SYS_LBC_LSDMR_PRETOACT6	(5 << (31 - 19))
+#define CONFIG_SYS_LBC_LSDMR_PRETOACT7	(7 << (31 - 19))
+#define CONFIG_SYS_LBC_LSDMR_ACTTORW3	(3 << (31 - 22))
+#define CONFIG_SYS_LBC_LSDMR_ACTTORW7	(7 << (31 - 22))
+#define CONFIG_SYS_LBC_LSDMR_ACTTORW6	(6 << (31 - 22))
+#define CONFIG_SYS_LBC_LSDMR_BL8	(1 << (31 - 23))
+#define CONFIG_SYS_LBC_LSDMR_WRC2	(2 << (31 - 27))
+#define CONFIG_SYS_LBC_LSDMR_WRC3	(3 << (31 - 27))
+#define CONFIG_SYS_LBC_LSDMR_WRC4	(0 << (31 - 27))
+#define CONFIG_SYS_LBC_LSDMR_BUFCMD	(1 << (31 - 29))
+#define CONFIG_SYS_LBC_LSDMR_CL3	(3 << (31 - 31))
+
+#define CONFIG_SYS_LBC_LSDMR_OP_NORMAL	(0 << (31 - 4))
+#define CONFIG_SYS_LBC_LSDMR_OP_ARFRSH	(1 << (31 - 4))
+#define CONFIG_SYS_LBC_LSDMR_OP_SRFRSH	(2 << (31 - 4))
+#define CONFIG_SYS_LBC_LSDMR_OP_MRW	(3 << (31 - 4))
+#define CONFIG_SYS_LBC_LSDMR_OP_PRECH	(4 << (31 - 4))
+#define CONFIG_SYS_LBC_LSDMR_OP_PCHALL	(5 << (31 - 4))
+#define CONFIG_SYS_LBC_LSDMR_OP_ACTBNK	(6 << (31 - 4))
+#define CONFIG_SYS_LBC_LSDMR_OP_RWINV	(7 << (31 - 4))
+
+#define CONFIG_SYS_LBC_LSDMR_COMMON    ( CONFIG_SYS_LBC_LSDMR_RFEN            \
+				| CONFIG_SYS_LBC_LSDMR_BSMA1516	\
+				| CONFIG_SYS_LBC_LSDMR_RFCR8		\
+				| CONFIG_SYS_LBC_LSDMR_PRETOACT6	\
+				| CONFIG_SYS_LBC_LSDMR_ACTTORW3	\
+				| CONFIG_SYS_LBC_LSDMR_BL8		\
+				| CONFIG_SYS_LBC_LSDMR_WRC3		\
+				| CONFIG_SYS_LBC_LSDMR_CL3		\
 				)
 
 /*
  * SDRAM Controller configuration sequence.
  */
-#define CFG_LBC_LSDMR_1		( CFG_LBC_LSDMR_COMMON \
-				| CFG_LBC_LSDMR_OP_PCHALL)
-#define CFG_LBC_LSDMR_2		( CFG_LBC_LSDMR_COMMON \
-				| CFG_LBC_LSDMR_OP_ARFRSH)
-#define CFG_LBC_LSDMR_3		( CFG_LBC_LSDMR_COMMON \
-				| CFG_LBC_LSDMR_OP_ARFRSH)
-#define CFG_LBC_LSDMR_4		( CFG_LBC_LSDMR_COMMON \
-				| CFG_LBC_LSDMR_OP_MRW)
-#define CFG_LBC_LSDMR_5		( CFG_LBC_LSDMR_COMMON \
-				| CFG_LBC_LSDMR_OP_NORMAL)
+#define CONFIG_SYS_LBC_LSDMR_1		( CONFIG_SYS_LBC_LSDMR_COMMON \
+				| CONFIG_SYS_LBC_LSDMR_OP_PCHALL)
+#define CONFIG_SYS_LBC_LSDMR_2		( CONFIG_SYS_LBC_LSDMR_COMMON \
+				| CONFIG_SYS_LBC_LSDMR_OP_ARFRSH)
+#define CONFIG_SYS_LBC_LSDMR_3		( CONFIG_SYS_LBC_LSDMR_COMMON \
+				| CONFIG_SYS_LBC_LSDMR_OP_ARFRSH)
+#define CONFIG_SYS_LBC_LSDMR_4		( CONFIG_SYS_LBC_LSDMR_COMMON \
+				| CONFIG_SYS_LBC_LSDMR_OP_MRW)
+#define CONFIG_SYS_LBC_LSDMR_5		( CONFIG_SYS_LBC_LSDMR_COMMON \
+				| CONFIG_SYS_LBC_LSDMR_OP_NORMAL)
 #endif
 
 /*
@@ -323,22 +323,22 @@
  */
 #define CONFIG_CONS_INDEX     1
 #undef CONFIG_SERIAL_SOFTWARE_FIFO
-#define CFG_NS16550
-#define CFG_NS16550_SERIAL
-#define CFG_NS16550_REG_SIZE    1
-#define CFG_NS16550_CLK		get_bus_freq(0)
+#define CONFIG_SYS_NS16550
+#define CONFIG_SYS_NS16550_SERIAL
+#define CONFIG_SYS_NS16550_REG_SIZE    1
+#define CONFIG_SYS_NS16550_CLK		get_bus_freq(0)
 
-#define CFG_BAUDRATE_TABLE  \
+#define CONFIG_SYS_BAUDRATE_TABLE  \
 	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200}
 
-#define CFG_NS16550_COM1        (CFG_IMMR+0x4500)
-#define CFG_NS16550_COM2        (CFG_IMMR+0x4600)
+#define CONFIG_SYS_NS16550_COM1        (CONFIG_SYS_IMMR+0x4500)
+#define CONFIG_SYS_NS16550_COM2        (CONFIG_SYS_IMMR+0x4600)
 
 #define CONFIG_CMDLINE_EDITING	1	/* add command line history	*/
 /* Use the HUSH parser */
-#define CFG_HUSH_PARSER
-#ifdef  CFG_HUSH_PARSER
-#define CFG_PROMPT_HUSH_PS2 "> "
+#define CONFIG_SYS_HUSH_PARSER
+#ifdef  CONFIG_SYS_HUSH_PARSER
+#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
 #endif
 
 /* pass open firmware flat tree */
@@ -352,53 +352,53 @@
 #define CONFIG_FSL_I2C
 #define CONFIG_I2C_MULTI_BUS
 #define CONFIG_I2C_CMD_TREE
-#define CFG_I2C_SPEED		400000	/* I2C speed and slave address */
-#define CFG_I2C_SLAVE		0x7F
-#define CFG_I2C_NOPROBES	{{0,0x69}}	/* Don't probe these addrs */
-#define CFG_I2C_OFFSET		0x3000
-#define CFG_I2C2_OFFSET		0x3100
+#define CONFIG_SYS_I2C_SPEED		400000	/* I2C speed and slave address */
+#define CONFIG_SYS_I2C_SLAVE		0x7F
+#define CONFIG_SYS_I2C_NOPROBES	{{0,0x69}}	/* Don't probe these addrs */
+#define CONFIG_SYS_I2C_OFFSET		0x3000
+#define CONFIG_SYS_I2C2_OFFSET		0x3100
 
 /* SPI */
 #define CONFIG_MPC8XXX_SPI
 #undef CONFIG_SOFT_SPI			/* SPI bit-banged */
 
 /* GPIOs.  Used as SPI chip selects */
-#define CFG_GPIO1_PRELIM
-#define CFG_GPIO1_DIR		0xC0000000  /* SPI CS on 0, LED on 1 */
-#define CFG_GPIO1_DAT		0xC0000000  /* Both are active LOW */
+#define CONFIG_SYS_GPIO1_PRELIM
+#define CONFIG_SYS_GPIO1_DIR		0xC0000000  /* SPI CS on 0, LED on 1 */
+#define CONFIG_SYS_GPIO1_DAT		0xC0000000  /* Both are active LOW */
 
 /* TSEC */
-#define CFG_TSEC1_OFFSET 0x24000
-#define CFG_TSEC1 (CFG_IMMR+CFG_TSEC1_OFFSET)
-#define CFG_TSEC2_OFFSET 0x25000
-#define CFG_TSEC2 (CFG_IMMR+CFG_TSEC2_OFFSET)
+#define CONFIG_SYS_TSEC1_OFFSET 0x24000
+#define CONFIG_SYS_TSEC1 (CONFIG_SYS_IMMR+CONFIG_SYS_TSEC1_OFFSET)
+#define CONFIG_SYS_TSEC2_OFFSET 0x25000
+#define CONFIG_SYS_TSEC2 (CONFIG_SYS_IMMR+CONFIG_SYS_TSEC2_OFFSET)
 
 /* USB */
-#define CFG_USE_MPC834XSYS_USB_PHY	1 /* Use SYS board PHY */
+#define CONFIG_SYS_USE_MPC834XSYS_USB_PHY	1 /* Use SYS board PHY */
 
 /*
  * General PCI
  * Addresses are mapped 1-1.
  */
-#define CFG_PCI1_MEM_BASE	0x80000000
-#define CFG_PCI1_MEM_PHYS	CFG_PCI1_MEM_BASE
-#define CFG_PCI1_MEM_SIZE	0x10000000	/* 256M */
-#define CFG_PCI1_MMIO_BASE	0x90000000
-#define CFG_PCI1_MMIO_PHYS	CFG_PCI1_MMIO_BASE
-#define CFG_PCI1_MMIO_SIZE	0x10000000	/* 256M */
-#define CFG_PCI1_IO_BASE	0x00000000
-#define CFG_PCI1_IO_PHYS	0xE2000000
-#define CFG_PCI1_IO_SIZE	0x00100000	/* 1M */
-
-#define CFG_PCI2_MEM_BASE	0xA0000000
-#define CFG_PCI2_MEM_PHYS	CFG_PCI2_MEM_BASE
-#define CFG_PCI2_MEM_SIZE	0x10000000	/* 256M */
-#define CFG_PCI2_MMIO_BASE	0xB0000000
-#define CFG_PCI2_MMIO_PHYS	CFG_PCI2_MMIO_BASE
-#define CFG_PCI2_MMIO_SIZE	0x10000000	/* 256M */
-#define CFG_PCI2_IO_BASE	0x00000000
-#define CFG_PCI2_IO_PHYS	0xE2100000
-#define CFG_PCI2_IO_SIZE	0x00100000	/* 1M */
+#define CONFIG_SYS_PCI1_MEM_BASE	0x80000000
+#define CONFIG_SYS_PCI1_MEM_PHYS	CONFIG_SYS_PCI1_MEM_BASE
+#define CONFIG_SYS_PCI1_MEM_SIZE	0x10000000	/* 256M */
+#define CONFIG_SYS_PCI1_MMIO_BASE	0x90000000
+#define CONFIG_SYS_PCI1_MMIO_PHYS	CONFIG_SYS_PCI1_MMIO_BASE
+#define CONFIG_SYS_PCI1_MMIO_SIZE	0x10000000	/* 256M */
+#define CONFIG_SYS_PCI1_IO_BASE	0x00000000
+#define CONFIG_SYS_PCI1_IO_PHYS	0xE2000000
+#define CONFIG_SYS_PCI1_IO_SIZE	0x00100000	/* 1M */
+
+#define CONFIG_SYS_PCI2_MEM_BASE	0xA0000000
+#define CONFIG_SYS_PCI2_MEM_PHYS	CONFIG_SYS_PCI2_MEM_BASE
+#define CONFIG_SYS_PCI2_MEM_SIZE	0x10000000	/* 256M */
+#define CONFIG_SYS_PCI2_MMIO_BASE	0xB0000000
+#define CONFIG_SYS_PCI2_MMIO_PHYS	CONFIG_SYS_PCI2_MMIO_BASE
+#define CONFIG_SYS_PCI2_MMIO_SIZE	0x10000000	/* 256M */
+#define CONFIG_SYS_PCI2_IO_BASE	0x00000000
+#define CONFIG_SYS_PCI2_IO_PHYS	0xE2100000
+#define CONFIG_SYS_PCI2_IO_SIZE	0x00100000	/* 1M */
 
 #if defined(CONFIG_PCI)
 
@@ -424,7 +424,7 @@
 #endif
 
 #undef CONFIG_PCI_SCAN_SHOW		/* show pci devices on startup */
-#define CFG_PCI_SUBSYS_VENDORID 0x1957  /* Freescale */
+#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x1957  /* Freescale */
 
 #endif	/* CONFIG_PCI */
 
@@ -459,30 +459,30 @@
  * Configure on-board RTC
  */
 #define CONFIG_RTC_DS1374			/* use ds1374 rtc via i2c	*/
-#define CFG_I2C_RTC_ADDR		0x68	/* at address 0x68		*/
+#define CONFIG_SYS_I2C_RTC_ADDR		0x68	/* at address 0x68		*/
 
 /*
  * Environment
  */
-#ifndef CFG_RAMBOOT
-	#define CFG_ENV_IS_IN_FLASH	1
-	#define CFG_ENV_ADDR		(CFG_MONITOR_BASE + CFG_MONITOR_LEN)
-	#define CFG_ENV_SECT_SIZE	0x20000	/* 128K(one sector) for env */
-	#define CFG_ENV_SIZE		0x2000
+#ifndef CONFIG_SYS_RAMBOOT
+	#define CONFIG_ENV_IS_IN_FLASH	1
+	#define CONFIG_ENV_ADDR		(CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)
+	#define CONFIG_ENV_SECT_SIZE	0x20000	/* 128K(one sector) for env */
+	#define CONFIG_ENV_SIZE		0x2000
 
 /* Address and size of Redundant Environment Sector	*/
-#define CFG_ENV_ADDR_REDUND	(CFG_ENV_ADDR + CFG_ENV_SECT_SIZE)
-#define CFG_ENV_SIZE_REDUND	(CFG_ENV_SIZE)
+#define CONFIG_ENV_ADDR_REDUND	(CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE)
+#define CONFIG_ENV_SIZE_REDUND	(CONFIG_ENV_SIZE)
 
 #else
-	#define CFG_NO_FLASH		1	/* Flash is not usable now */
-	#define CFG_ENV_IS_NOWHERE	1	/* Store ENV in memory only */
-	#define CFG_ENV_ADDR		(CFG_MONITOR_BASE - 0x1000)
-	#define CFG_ENV_SIZE		0x2000
+	#define CONFIG_SYS_NO_FLASH		1	/* Flash is not usable now */
+	#define CONFIG_ENV_IS_NOWHERE	1	/* Store ENV in memory only */
+	#define CONFIG_ENV_ADDR		(CONFIG_SYS_MONITOR_BASE - 0x1000)
+	#define CONFIG_ENV_SIZE		0x2000
 #endif
 
 #define CONFIG_LOADS_ECHO	1	/* echo on for serial download */
-#define CFG_LOADS_BAUD_CHANGE	1	/* allow baudrate change */
+#define CONFIG_SYS_LOADS_BAUD_CHANGE	1	/* allow baudrate change */
 
 
 /*
@@ -508,7 +508,7 @@
     #define CONFIG_CMD_PCI
 #endif
 
-#if defined(CFG_RAMBOOT)
+#if defined(CONFIG_SYS_RAMBOOT)
     #undef CONFIG_CMD_ENV
     #undef CONFIG_CMD_LOADS
 #endif
@@ -519,60 +519,60 @@
 /*
  * Miscellaneous configurable options
  */
-#define CFG_LONGHELP			/* undef to save memory */
-#define CFG_LOAD_ADDR	0x2000000	/* default load address */
-#define CFG_PROMPT	"=> "		/* Monitor Command Prompt */
+#define CONFIG_SYS_LONGHELP			/* undef to save memory */
+#define CONFIG_SYS_LOAD_ADDR	0x2000000	/* default load address */
+#define CONFIG_SYS_PROMPT	"=> "		/* Monitor Command Prompt */
 
 #if defined(CONFIG_CMD_KGDB)
-	#define CFG_CBSIZE	1024		/* Console I/O Buffer Size */
+	#define CONFIG_SYS_CBSIZE	1024		/* Console I/O Buffer Size */
 #else
-	#define CFG_CBSIZE	256		/* Console I/O Buffer Size */
+	#define CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size */
 #endif
 
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define CFG_MAXARGS	16		/* max number of command args */
-#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size */
-#define CFG_HZ		1000		/* decrementer freq: 1ms ticks */
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS	16		/* max number of command args */
+#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size */
+#define CONFIG_SYS_HZ		1000		/* decrementer freq: 1ms ticks */
 
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define CFG_BOOTMAPSZ	(8 << 20)	/* Initial Memory map for Linux*/
+#define CONFIG_SYS_BOOTMAPSZ	(8 << 20)	/* Initial Memory map for Linux*/
 
-#define CFG_RCWH_PCIHOST 0x80000000 /* PCIHOST  */
+#define CONFIG_SYS_RCWH_PCIHOST 0x80000000 /* PCIHOST  */
 
 #if 1 /*528/264*/
-#define CFG_HRCW_LOW (\
+#define CONFIG_SYS_HRCW_LOW (\
 	HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\
 	HRCWL_DDR_TO_SCB_CLK_1X1 |\
 	HRCWL_CSB_TO_CLKIN |\
 	HRCWL_VCO_1X2 |\
 	HRCWL_CORE_TO_CSB_2X1)
 #elif 0 /*396/132*/
-#define CFG_HRCW_LOW (\
+#define CONFIG_SYS_HRCW_LOW (\
 	HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\
 	HRCWL_DDR_TO_SCB_CLK_1X1 |\
 	HRCWL_CSB_TO_CLKIN |\
 	HRCWL_VCO_1X4 |\
 	HRCWL_CORE_TO_CSB_3X1)
 #elif 0 /*264/132*/
-#define CFG_HRCW_LOW (\
+#define CONFIG_SYS_HRCW_LOW (\
 	HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\
 	HRCWL_DDR_TO_SCB_CLK_1X1 |\
 	HRCWL_CSB_TO_CLKIN |\
 	HRCWL_VCO_1X4 |\
 	HRCWL_CORE_TO_CSB_2X1)
 #elif 0 /*132/132*/
-#define CFG_HRCW_LOW (\
+#define CONFIG_SYS_HRCW_LOW (\
 	HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\
 	HRCWL_DDR_TO_SCB_CLK_1X1 |\
 	HRCWL_CSB_TO_CLKIN |\
 	HRCWL_VCO_1X4 |\
 	HRCWL_CORE_TO_CSB_1X1)
 #elif 0 /*264/264 */
-#define CFG_HRCW_LOW (\
+#define CONFIG_SYS_HRCW_LOW (\
 	HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\
 	HRCWL_DDR_TO_SCB_CLK_1X1 |\
 	HRCWL_CSB_TO_CLKIN |\
@@ -581,7 +581,7 @@
 #endif
 
 #ifdef CONFIG_PCISLAVE
-#define CFG_HRCW_HIGH (\
+#define CONFIG_SYS_HRCW_HIGH (\
 	HRCWH_PCI_AGENT |\
 	HRCWH_64_BIT_PCI |\
 	HRCWH_PCI1_ARBITER_DISABLE |\
@@ -595,7 +595,7 @@
 	HRCWH_TSEC2M_IN_GMII )
 #else
 #if defined(PCI_64BIT)
-#define CFG_HRCW_HIGH (\
+#define CONFIG_SYS_HRCW_HIGH (\
 	HRCWH_PCI_HOST |\
 	HRCWH_64_BIT_PCI |\
 	HRCWH_PCI1_ARBITER_ENABLE |\
@@ -608,7 +608,7 @@
 	HRCWH_TSEC1M_IN_GMII |\
 	HRCWH_TSEC2M_IN_GMII )
 #else
-#define CFG_HRCW_HIGH (\
+#define CONFIG_SYS_HRCW_HIGH (\
 	HRCWH_PCI_HOST |\
 	HRCWH_32_BIT_PCI |\
 	HRCWH_PCI1_ARBITER_ENABLE |\
@@ -626,85 +626,85 @@
 /*
  * System performance
  */
-#define CFG_ACR_PIPE_DEP	3	/* Arbiter pipeline depth (0-3) */
-#define CFG_ACR_RPTCNT		3	/* Arbiter repeat count (0-7) */
-#define CFG_SPCR_TSEC1EP	3	/* TSEC1 emergency priority (0-3) */
-#define CFG_SPCR_TSEC2EP	3	/* TSEC2 emergency priority (0-3) */
-#define CFG_SCCR_TSEC1CM	1	/* TSEC1 clock mode (0-3) */
-#define CFG_SCCR_TSEC2CM	1	/* TSEC2 & I2C0 clock mode (0-3) */
+#define CONFIG_SYS_ACR_PIPE_DEP	3	/* Arbiter pipeline depth (0-3) */
+#define CONFIG_SYS_ACR_RPTCNT		3	/* Arbiter repeat count (0-7) */
+#define CONFIG_SYS_SPCR_TSEC1EP	3	/* TSEC1 emergency priority (0-3) */
+#define CONFIG_SYS_SPCR_TSEC2EP	3	/* TSEC2 emergency priority (0-3) */
+#define CONFIG_SYS_SCCR_TSEC1CM	1	/* TSEC1 clock mode (0-3) */
+#define CONFIG_SYS_SCCR_TSEC2CM	1	/* TSEC2 & I2C0 clock mode (0-3) */
 
 /* System IO Config */
-#define CFG_SICRH SICRH_TSOBI1
-#define CFG_SICRL SICRL_LDP_A
+#define CONFIG_SYS_SICRH SICRH_TSOBI1
+#define CONFIG_SYS_SICRL SICRL_LDP_A
 
-#define CFG_HID0_INIT	0x000000000
-#define CFG_HID0_FINAL	HID0_ENABLE_MACHINE_CHECK
+#define CONFIG_SYS_HID0_INIT	0x000000000
+#define CONFIG_SYS_HID0_FINAL	HID0_ENABLE_MACHINE_CHECK
 
-/* #define CFG_HID0_FINAL		(\
+/* #define CONFIG_SYS_HID0_FINAL		(\
 	HID0_ENABLE_INSTRUCTION_CACHE |\
 	HID0_ENABLE_M_BIT |\
 	HID0_ENABLE_ADDRESS_BROADCAST ) */
 
 
-#define CFG_HID2 HID2_HBE
+#define CONFIG_SYS_HID2 HID2_HBE
 #define CONFIG_HIGH_BATS	1	/* High BATs supported */
 
 /* DDR @ 0x00000000 */
-#define CFG_IBAT0L	(CFG_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
-#define CFG_IBAT0U	(CFG_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CONFIG_SYS_IBAT0L	(CONFIG_SYS_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
+#define CONFIG_SYS_IBAT0U	(CONFIG_SYS_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
 
 /* PCI @ 0x80000000 */
 #ifdef CONFIG_PCI
-#define CFG_IBAT1L	(CFG_PCI1_MEM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
-#define CFG_IBAT1U	(CFG_PCI1_MEM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
-#define CFG_IBAT2L	(CFG_PCI1_MMIO_BASE | BATL_PP_10 | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
-#define CFG_IBAT2U	(CFG_PCI1_MMIO_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CONFIG_SYS_IBAT1L	(CONFIG_SYS_PCI1_MEM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
+#define CONFIG_SYS_IBAT1U	(CONFIG_SYS_PCI1_MEM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CONFIG_SYS_IBAT2L	(CONFIG_SYS_PCI1_MMIO_BASE | BATL_PP_10 | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
+#define CONFIG_SYS_IBAT2U	(CONFIG_SYS_PCI1_MMIO_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
 #else
-#define CFG_IBAT1L	(0)
-#define CFG_IBAT1U	(0)
-#define CFG_IBAT2L	(0)
-#define CFG_IBAT2U	(0)
+#define CONFIG_SYS_IBAT1L	(0)
+#define CONFIG_SYS_IBAT1U	(0)
+#define CONFIG_SYS_IBAT2L	(0)
+#define CONFIG_SYS_IBAT2U	(0)
 #endif
 
 #ifdef CONFIG_MPC83XX_PCI2
-#define CFG_IBAT3L	(CFG_PCI2_MEM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
-#define CFG_IBAT3U	(CFG_PCI2_MEM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
-#define CFG_IBAT4L	(CFG_PCI2_MMIO_BASE | BATL_PP_10 | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
-#define CFG_IBAT4U	(CFG_PCI2_MMIO_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CONFIG_SYS_IBAT3L	(CONFIG_SYS_PCI2_MEM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
+#define CONFIG_SYS_IBAT3U	(CONFIG_SYS_PCI2_MEM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CONFIG_SYS_IBAT4L	(CONFIG_SYS_PCI2_MMIO_BASE | BATL_PP_10 | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
+#define CONFIG_SYS_IBAT4U	(CONFIG_SYS_PCI2_MMIO_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
 #else
-#define CFG_IBAT3L	(0)
-#define CFG_IBAT3U	(0)
-#define CFG_IBAT4L	(0)
-#define CFG_IBAT4U	(0)
+#define CONFIG_SYS_IBAT3L	(0)
+#define CONFIG_SYS_IBAT3U	(0)
+#define CONFIG_SYS_IBAT4L	(0)
+#define CONFIG_SYS_IBAT4U	(0)
 #endif
 
 /* IMMRBAR @ 0xE0000000, PCI IO @ 0xE2000000 & BCSR @ 0xE2400000 */
-#define CFG_IBAT5L	(CFG_IMMR | BATL_PP_10 | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
-#define CFG_IBAT5U	(CFG_IMMR | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CONFIG_SYS_IBAT5L	(CONFIG_SYS_IMMR | BATL_PP_10 | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
+#define CONFIG_SYS_IBAT5U	(CONFIG_SYS_IMMR | BATU_BL_256M | BATU_VS | BATU_VP)
 
 /* SDRAM @ 0xF0000000, stack in DCACHE 0xFDF00000 & FLASH @ 0xFE000000 */
-#define CFG_IBAT6L	(0xF0000000 | BATL_PP_10 | BATL_MEMCOHERENCE)
-#define CFG_IBAT6U	(0xF0000000 | BATU_BL_256M | BATU_VS | BATU_VP)
-
-#define CFG_IBAT7L	(0)
-#define CFG_IBAT7U	(0)
-
-#define CFG_DBAT0L	CFG_IBAT0L
-#define CFG_DBAT0U	CFG_IBAT0U
-#define CFG_DBAT1L	CFG_IBAT1L
-#define CFG_DBAT1U	CFG_IBAT1U
-#define CFG_DBAT2L	CFG_IBAT2L
-#define CFG_DBAT2U	CFG_IBAT2U
-#define CFG_DBAT3L	CFG_IBAT3L
-#define CFG_DBAT3U	CFG_IBAT3U
-#define CFG_DBAT4L	CFG_IBAT4L
-#define CFG_DBAT4U	CFG_IBAT4U
-#define CFG_DBAT5L	CFG_IBAT5L
-#define CFG_DBAT5U	CFG_IBAT5U
-#define CFG_DBAT6L	CFG_IBAT6L
-#define CFG_DBAT6U	CFG_IBAT6U
-#define CFG_DBAT7L	CFG_IBAT7L
-#define CFG_DBAT7U	CFG_IBAT7U
+#define CONFIG_SYS_IBAT6L	(0xF0000000 | BATL_PP_10 | BATL_MEMCOHERENCE)
+#define CONFIG_SYS_IBAT6U	(0xF0000000 | BATU_BL_256M | BATU_VS | BATU_VP)
+
+#define CONFIG_SYS_IBAT7L	(0)
+#define CONFIG_SYS_IBAT7U	(0)
+
+#define CONFIG_SYS_DBAT0L	CONFIG_SYS_IBAT0L
+#define CONFIG_SYS_DBAT0U	CONFIG_SYS_IBAT0U
+#define CONFIG_SYS_DBAT1L	CONFIG_SYS_IBAT1L
+#define CONFIG_SYS_DBAT1U	CONFIG_SYS_IBAT1U
+#define CONFIG_SYS_DBAT2L	CONFIG_SYS_IBAT2L
+#define CONFIG_SYS_DBAT2U	CONFIG_SYS_IBAT2U
+#define CONFIG_SYS_DBAT3L	CONFIG_SYS_IBAT3L
+#define CONFIG_SYS_DBAT3U	CONFIG_SYS_IBAT3U
+#define CONFIG_SYS_DBAT4L	CONFIG_SYS_IBAT4L
+#define CONFIG_SYS_DBAT4U	CONFIG_SYS_IBAT4U
+#define CONFIG_SYS_DBAT5L	CONFIG_SYS_IBAT5L
+#define CONFIG_SYS_DBAT5U	CONFIG_SYS_IBAT5U
+#define CONFIG_SYS_DBAT6L	CONFIG_SYS_IBAT6L
+#define CONFIG_SYS_DBAT6U	CONFIG_SYS_IBAT6U
+#define CONFIG_SYS_DBAT7L	CONFIG_SYS_IBAT7L
+#define CONFIG_SYS_DBAT7U	CONFIG_SYS_IBAT7U
 
 /*
  * Internal Definitions
diff --git a/include/configs/MPC8349ITX.h b/include/configs/MPC8349ITX.h
index 45ddd5c45..14cbc4571 100644
--- a/include/configs/MPC8349ITX.h
+++ b/include/configs/MPC8349ITX.h
@@ -57,7 +57,7 @@
 #define __CONFIG_H
 
 #if (TEXT_BASE == 0xFE000000)
-#define CFG_LOWBOOT
+#define CONFIG_SYS_LOWBOOT
 #endif
 
 /*
@@ -66,7 +66,7 @@
 #define CONFIG_MPC834X		/* MPC834x family (8343, 8347, 8349) */
 #define CONFIG_MPC8349		/* MPC8349 specific */
 
-#define CFG_IMMR		0xE0000000	/* The IMMR is relocated to here */
+#define CONFIG_SYS_IMMR		0xE0000000	/* The IMMR is relocated to here */
 
 #define CONFIG_MISC_INIT_F
 #define CONFIG_MISC_INIT_R
@@ -95,26 +95,26 @@
 #define CONFIG_FSL_I2C
 #define CONFIG_I2C_MULTI_BUS
 #define CONFIG_I2C_CMD_TREE
-#define CFG_I2C_OFFSET		0x3000
-#define CFG_I2C2_OFFSET		0x3100
-#define CFG_SPD_BUS_NUM		1	/* The I2C bus for SPD */
-
-#define CFG_I2C_8574_ADDR1	0x20	/* I2C1, PCF8574 */
-#define CFG_I2C_8574_ADDR2	0x21	/* I2C1, PCF8574 */
-#define CFG_I2C_8574A_ADDR1	0x38	/* I2C1, PCF8574A */
-#define CFG_I2C_8574A_ADDR2	0x39	/* I2C1, PCF8574A */
-#define CFG_I2C_EEPROM_ADDR	0x50	/* I2C0, Board EEPROM */
-#define CFG_I2C_RTC_ADDR	0x68	/* I2C1, DS1339 RTC*/
+#define CONFIG_SYS_I2C_OFFSET		0x3000
+#define CONFIG_SYS_I2C2_OFFSET		0x3100
+#define CONFIG_SYS_SPD_BUS_NUM		1	/* The I2C bus for SPD */
+
+#define CONFIG_SYS_I2C_8574_ADDR1	0x20	/* I2C1, PCF8574 */
+#define CONFIG_SYS_I2C_8574_ADDR2	0x21	/* I2C1, PCF8574 */
+#define CONFIG_SYS_I2C_8574A_ADDR1	0x38	/* I2C1, PCF8574A */
+#define CONFIG_SYS_I2C_8574A_ADDR2	0x39	/* I2C1, PCF8574A */
+#define CONFIG_SYS_I2C_EEPROM_ADDR	0x50	/* I2C0, Board EEPROM */
+#define CONFIG_SYS_I2C_RTC_ADDR	0x68	/* I2C1, DS1339 RTC*/
 #define SPD_EEPROM_ADDRESS	0x51	/* I2C1, DDR */
 
-#define CFG_I2C_SPEED		400000	/* I2C speed and slave address */
-#define CFG_I2C_SLAVE		0x7F
+#define CONFIG_SYS_I2C_SPEED		400000	/* I2C speed and slave address */
+#define CONFIG_SYS_I2C_SLAVE		0x7F
 
 /* Don't probe these addresses: */
-#define CFG_I2C_NOPROBES	{{1, CFG_I2C_8574_ADDR1}, \
-				 {1, CFG_I2C_8574_ADDR2}, \
-				 {1, CFG_I2C_8574A_ADDR1}, \
-				 {1, CFG_I2C_8574A_ADDR2}}
+#define CONFIG_SYS_I2C_NOPROBES	{{1, CONFIG_SYS_I2C_8574_ADDR1}, \
+				 {1, CONFIG_SYS_I2C_8574_ADDR2}, \
+				 {1, CONFIG_SYS_I2C_8574A_ADDR1}, \
+				 {1, CONFIG_SYS_I2C_8574A_ADDR2}}
 /* Bit definitions for the 8574[A] I2C expander */
 #define I2C_8574_REVISION	0x03	/* Board revision, 00=0.0, 01=0.1, 10=1.0 */
 #define I2C_8574_CF		0x08	/* 1=Compact flash absent, 0=present */
@@ -129,15 +129,15 @@
 /* Compact Flash */
 #ifdef CONFIG_COMPACT_FLASH
 
-#define CFG_IDE_MAXBUS		1
-#define CFG_IDE_MAXDEVICE	1
+#define CONFIG_SYS_IDE_MAXBUS		1
+#define CONFIG_SYS_IDE_MAXDEVICE	1
 
-#define CFG_ATA_IDE0_OFFSET	0x0000
-#define CFG_ATA_BASE_ADDR	CFG_CF_BASE
-#define CFG_ATA_DATA_OFFSET	0x0000
-#define CFG_ATA_REG_OFFSET	0
-#define CFG_ATA_ALT_OFFSET	0x0200
-#define CFG_ATA_STRIDE		2
+#define CONFIG_SYS_ATA_IDE0_OFFSET	0x0000
+#define CONFIG_SYS_ATA_BASE_ADDR	CONFIG_SYS_CF_BASE
+#define CONFIG_SYS_ATA_DATA_OFFSET	0x0000
+#define CONFIG_SYS_ATA_REG_OFFSET	0
+#define CONFIG_SYS_ATA_ALT_OFFSET	0x0200
+#define CONFIG_SYS_ATA_STRIDE		2
 
 #define ATA_RESET_TIME	1	/* If a CF card is not inserted, time out quickly */
 
@@ -148,14 +148,14 @@
 /*
  * DDR Setup
  */
-#define CFG_DDR_BASE		0x00000000	/* DDR is system memory*/
-#define CFG_SDRAM_BASE		CFG_DDR_BASE
-#define CFG_DDR_SDRAM_BASE	CFG_DDR_BASE
-#define CFG_83XX_DDR_USES_CS0
-#define CFG_MEMTEST_START	0x1000		/* memtest region */
-#define CFG_MEMTEST_END		0x2000
-
-#define CFG_DDR_SDRAM_CLK_CNTL	(DDR_SDRAM_CLK_CNTL_SS_EN | \
+#define CONFIG_SYS_DDR_BASE		0x00000000	/* DDR is system memory*/
+#define CONFIG_SYS_SDRAM_BASE		CONFIG_SYS_DDR_BASE
+#define CONFIG_SYS_DDR_SDRAM_BASE	CONFIG_SYS_DDR_BASE
+#define CONFIG_SYS_83XX_DDR_USES_CS0
+#define CONFIG_SYS_MEMTEST_START	0x1000		/* memtest region */
+#define CONFIG_SYS_MEMTEST_END		0x2000
+
+#define CONFIG_SYS_DDR_SDRAM_CLK_CNTL	(DDR_SDRAM_CLK_CNTL_SS_EN | \
 				DDR_SDRAM_CLK_CNTL_CLK_ADJUST_075)
 
 #ifdef CONFIG_HARD_I2C
@@ -163,33 +163,34 @@
 #endif
 
 #ifndef CONFIG_SPD_EEPROM	/* No SPD? Then manually set up DDR parameters */
-    #define CFG_DDR_SIZE	256		/* Mb */
-    #define CFG_DDR_CONFIG	(CSCONFIG_EN | CSCONFIG_ROW_BIT_13 | CSCONFIG_COL_BIT_10)
+    #define CONFIG_SYS_DDR_SIZE	256		/* Mb */
+    #define CONFIG_SYS_DDR_CONFIG	(CSCONFIG_EN | CSCONFIG_ROW_BIT_13 | CSCONFIG_COL_BIT_10)
 
-    #define CFG_DDR_TIMING_1	0x26242321
-    #define CFG_DDR_TIMING_2	0x00000800  /* P9-45, may need tuning */
+    #define CONFIG_SYS_DDR_TIMING_1	0x26242321
+    #define CONFIG_SYS_DDR_TIMING_2	0x00000800  /* P9-45, may need tuning */
 #endif
 
 /*
  *Flash on the Local Bus
  */
 
-#define CFG_FLASH_CFI				/* use the Common Flash Interface */
+#define CONFIG_SYS_FLASH_CFI				/* use the Common Flash Interface */
 #define CONFIG_FLASH_CFI_DRIVER			/* use the CFI driver */
-#define CFG_FLASH_BASE		0xFE000000	/* start of FLASH   */
-#define CFG_FLASH_EMPTY_INFO
-#define CFG_MAX_FLASH_SECT	135	/* 127 64KB sectors + 8 8KB sectors per device */
-#define CFG_FLASH_ERASE_TOUT	60000	/* Flash Erase Timeout (ms) */
-#define CFG_FLASH_WRITE_TOUT	500	/* Flash Write Timeout (ms) */
-#define CFG_FLASH_CFI_WIDTH	FLASH_CFI_16BIT
+#define CONFIG_SYS_FLASH_BASE		0xFE000000	/* start of FLASH   */
+#define CONFIG_SYS_FLASH_EMPTY_INFO
+#define CONFIG_SYS_MAX_FLASH_SECT	135	/* 127 64KB sectors + 8 8KB sectors per device */
+#define CONFIG_SYS_FLASH_ERASE_TOUT	60000	/* Flash Erase Timeout (ms) */
+#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Flash Write Timeout (ms) */
+#define CONFIG_SYS_FLASH_CFI_WIDTH	FLASH_CFI_16BIT
 
 /* The ITX has two flash chips, but the ITX-GP has only one.  To support both
 boards, we say we have two, but don't display a message if we find only one. */
-#define CFG_FLASH_QUIET_TEST
-#define CFG_MAX_FLASH_BANKS	2		/* number of banks */
-#define CFG_FLASH_BANKS_LIST	{CFG_FLASH_BASE, CFG_FLASH_BASE + 0x800000}
-#define CFG_FLASH_SIZE		16		/* FLASH size in MB */
-#define CFG_FLASH_SIZE_SHIFT	4		/* log2 of the above value */
+#define CONFIG_SYS_FLASH_QUIET_TEST
+#define CONFIG_SYS_MAX_FLASH_BANKS	2		/* number of banks */
+#define CONFIG_SYS_FLASH_BANKS_LIST	{CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE + 0x800000}
+#define CONFIG_SYS_FLASH_SIZE		16		/* FLASH size in MB */
+#define CONFIG_SYS_FLASH_SIZE_SHIFT	4		/* log2 of the above value */
+#define CONFIG_SYS_FLASH_PROTECTION	1		/* Use h/w Flash protection. */
 
 /* Vitesse 7385 */
 
@@ -209,34 +210,34 @@ boards, we say we have two, but don't display a message if we find only one. */
 
 /* Flash */
 
-#define CFG_BR0_PRELIM		(CFG_FLASH_BASE | BR_PS_16 | BR_V)
-#define CFG_OR0_PRELIM		((~(CFG_FLASH_SIZE - 1) << 20) | OR_UPM_XAM | \
+#define CONFIG_SYS_BR0_PRELIM		(CONFIG_SYS_FLASH_BASE | BR_PS_16 | BR_V)
+#define CONFIG_SYS_OR0_PRELIM		((~(CONFIG_SYS_FLASH_SIZE - 1) << 20) | OR_UPM_XAM | \
 				OR_GPCM_CSNT | OR_GPCM_ACS_DIV2 | OR_GPCM_XACS | OR_GPCM_SCY_15 | \
 				OR_GPCM_TRLX | OR_GPCM_EHTR | OR_GPCM_EAD)
-#define CFG_LBLAWBAR0_PRELIM	CFG_FLASH_BASE
-#define CFG_LBLAWAR0_PRELIM	(LBLAWAR_EN | (0x13 + CFG_FLASH_SIZE_SHIFT))
+#define CONFIG_SYS_LBLAWBAR0_PRELIM	CONFIG_SYS_FLASH_BASE
+#define CONFIG_SYS_LBLAWAR0_PRELIM	(LBLAWAR_EN | (0x13 + CONFIG_SYS_FLASH_SIZE_SHIFT))
 
 /* Vitesse 7385 */
 
-#define CFG_VSC7385_BASE	0xF8000000
+#define CONFIG_SYS_VSC7385_BASE	0xF8000000
 
 #ifdef CONFIG_VSC7385_ENET
 
-#define CFG_BR1_PRELIM		(CFG_VSC7385_BASE | BR_PS_8 | BR_V)
-#define CFG_OR1_PRELIM		(OR_AM_128KB | OR_GPCM_CSNT | OR_GPCM_XACS | \
+#define CONFIG_SYS_BR1_PRELIM		(CONFIG_SYS_VSC7385_BASE | BR_PS_8 | BR_V)
+#define CONFIG_SYS_OR1_PRELIM		(OR_AM_128KB | OR_GPCM_CSNT | OR_GPCM_XACS | \
 				OR_GPCM_SCY_15 | OR_GPCM_SETA | OR_GPCM_TRLX | \
 				OR_GPCM_EHTR | OR_GPCM_EAD)
 
-#define CFG_LBLAWBAR1_PRELIM	CFG_VSC7385_BASE
-#define CFG_LBLAWAR1_PRELIM	(LBLAWAR_EN | LBLAWAR_128KB)
+#define CONFIG_SYS_LBLAWBAR1_PRELIM	CONFIG_SYS_VSC7385_BASE
+#define CONFIG_SYS_LBLAWAR1_PRELIM	(LBLAWAR_EN | LBLAWAR_128KB)
 
 #endif
 
 /* LED */
 
-#define CFG_LED_BASE		0xF9000000
-#define CFG_BR2_PRELIM		(CFG_LED_BASE | BR_PS_8 | BR_V)
-#define CFG_OR2_PRELIM		(OR_AM_2MB | OR_GPCM_CSNT | OR_GPCM_ACS_DIV2 | \
+#define CONFIG_SYS_LED_BASE		0xF9000000
+#define CONFIG_SYS_BR2_PRELIM		(CONFIG_SYS_LED_BASE | BR_PS_8 | BR_V)
+#define CONFIG_SYS_OR2_PRELIM		(OR_AM_2MB | OR_GPCM_CSNT | OR_GPCM_ACS_DIV2 | \
 				OR_GPCM_XACS | OR_GPCM_SCY_9 | OR_GPCM_TRLX | \
 				OR_GPCM_EHTR | OR_GPCM_EAD)
 
@@ -244,39 +245,38 @@ boards, we say we have two, but don't display a message if we find only one. */
 
 #ifdef CONFIG_COMPACT_FLASH
 
-#define CFG_CF_BASE		0xF0000000
+#define CONFIG_SYS_CF_BASE		0xF0000000
 
-#define CFG_BR3_PRELIM		(CFG_CF_BASE | BR_PS_16 | BR_MS_UPMA | BR_V)
-#define CFG_OR3_PRELIM		(OR_UPM_AM | OR_UPM_BI)
+#define CONFIG_SYS_BR3_PRELIM		(CONFIG_SYS_CF_BASE | BR_PS_16 | BR_MS_UPMA | BR_V)
+#define CONFIG_SYS_OR3_PRELIM		(OR_UPM_AM | OR_UPM_BI)
 
-#define CFG_LBLAWBAR3_PRELIM	CFG_CF_BASE
-#define CFG_LBLAWAR3_PRELIM	(LBLAWAR_EN | LBLAWAR_64KB)
+#define CONFIG_SYS_LBLAWBAR3_PRELIM	CONFIG_SYS_CF_BASE
+#define CONFIG_SYS_LBLAWAR3_PRELIM	(LBLAWAR_EN | LBLAWAR_64KB)
 
 #endif
 
 /*
  * U-Boot memory configuration
  */
-#define CFG_MONITOR_BASE	TEXT_BASE	/* start of monitor */
+#define CONFIG_SYS_MONITOR_BASE	TEXT_BASE	/* start of monitor */
 
-#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
-#define CFG_RAMBOOT
+#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
+#define CONFIG_SYS_RAMBOOT
 #else
-#undef	CFG_RAMBOOT
+#undef	CONFIG_SYS_RAMBOOT
 #endif
 
-#define CONFIG_L1_INIT_RAM
-#define CFG_INIT_RAM_LOCK
-#define CFG_INIT_RAM_ADDR	0xFD000000	/* Initial RAM address */
-#define CFG_INIT_RAM_END	0x1000		/* End of used area in RAM*/
+#define CONFIG_SYS_INIT_RAM_LOCK
+#define CONFIG_SYS_INIT_RAM_ADDR	0xFD000000	/* Initial RAM address */
+#define CONFIG_SYS_INIT_RAM_END	0x1000		/* End of used area in RAM*/
 
-#define CFG_GBL_DATA_SIZE	0x100		/* num bytes initial data */
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_GBL_DATA_SIZE	0x100		/* num bytes initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
-/* CFG_MONITOR_LEN must be a multiple of CFG_ENV_SECT_SIZE */
-#define CFG_MONITOR_LEN		(256 * 1024) /* Reserve 256 kB for Mon */
-#define CFG_MALLOC_LEN		(128 * 1024) /* Reserved for malloc */
+/* CONFIG_SYS_MONITOR_LEN must be a multiple of CONFIG_ENV_SECT_SIZE */
+#define CONFIG_SYS_MONITOR_LEN		(256 * 1024) /* Reserve 256 kB for Mon */
+#define CONFIG_SYS_MALLOC_LEN		(128 * 1024) /* Reserved for malloc */
 
 /*
  * Local Bus LCRR and LBCR regs
@@ -284,30 +284,30 @@ boards, we say we have two, but don't display a message if we find only one. */
  * External Local Bus rate is
  *    CLKIN * HRCWL_CSB_TO_CLKIN / HRCWL_LCL_BUS_TO_SCB_CLK / LCRR_CLKDIV
  */
-#define CFG_LCRR	(LCRR_DBYP | LCRR_CLKDIV_4)
-#define CFG_LBC_LBCR	0x00000000
+#define CONFIG_SYS_LCRR	(LCRR_DBYP | LCRR_CLKDIV_4)
+#define CONFIG_SYS_LBC_LBCR	0x00000000
 
-#define CFG_LBC_LSRT	0x32000000    /* LB sdram refresh timer, about 6us */
-#define CFG_LBC_MRTPR	0x20000000    /* LB refresh timer prescal, 266MHz/32*/
+#define CONFIG_SYS_LBC_LSRT	0x32000000    /* LB sdram refresh timer, about 6us */
+#define CONFIG_SYS_LBC_MRTPR	0x20000000    /* LB refresh timer prescal, 266MHz/32*/
 
 /*
  * Serial Port
  */
 #define CONFIG_CONS_INDEX	1
 #undef	CONFIG_SERIAL_SOFTWARE_FIFO
-#define CFG_NS16550
-#define CFG_NS16550_SERIAL
-#define CFG_NS16550_REG_SIZE	1
-#define CFG_NS16550_CLK		get_bus_freq(0)
+#define CONFIG_SYS_NS16550
+#define CONFIG_SYS_NS16550_SERIAL
+#define CONFIG_SYS_NS16550_REG_SIZE	1
+#define CONFIG_SYS_NS16550_CLK		get_bus_freq(0)
 
-#define CFG_BAUDRATE_TABLE  \
+#define CONFIG_SYS_BAUDRATE_TABLE  \
 	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 115200}
 
 #define CONFIG_CONSOLE		ttyS0
 #define CONFIG_BAUDRATE		115200
 
-#define CFG_NS16550_COM1	(CFG_IMMR + 0x4500)
-#define CFG_NS16550_COM2	(CFG_IMMR + 0x4600)
+#define CONFIG_SYS_NS16550_COM1	(CONFIG_SYS_IMMR + 0x4500)
+#define CONFIG_SYS_NS16550_COM2	(CONFIG_SYS_IMMR + 0x4600)
 
 /* pass open firmware flat tree */
 #define CONFIG_OF_LIBFDT	1
@@ -325,26 +325,26 @@ boards, we say we have two, but don't display a message if we find only one. */
  * General PCI
  * Addresses are mapped 1-1.
  */
-#define CFG_PCI1_MEM_BASE	0x80000000
-#define CFG_PCI1_MEM_PHYS	CFG_PCI1_MEM_BASE
-#define CFG_PCI1_MEM_SIZE	0x10000000	/* 256M */
-#define CFG_PCI1_MMIO_BASE	(CFG_PCI1_MEM_BASE + CFG_PCI1_MEM_SIZE)
-#define CFG_PCI1_MMIO_PHYS	CFG_PCI1_MMIO_BASE
-#define CFG_PCI1_MMIO_SIZE	0x10000000	/* 256M */
-#define CFG_PCI1_IO_BASE	0x00000000
-#define CFG_PCI1_IO_PHYS	0xE2000000
-#define CFG_PCI1_IO_SIZE	0x01000000	/* 16M */
+#define CONFIG_SYS_PCI1_MEM_BASE	0x80000000
+#define CONFIG_SYS_PCI1_MEM_PHYS	CONFIG_SYS_PCI1_MEM_BASE
+#define CONFIG_SYS_PCI1_MEM_SIZE	0x10000000	/* 256M */
+#define CONFIG_SYS_PCI1_MMIO_BASE	(CONFIG_SYS_PCI1_MEM_BASE + CONFIG_SYS_PCI1_MEM_SIZE)
+#define CONFIG_SYS_PCI1_MMIO_PHYS	CONFIG_SYS_PCI1_MMIO_BASE
+#define CONFIG_SYS_PCI1_MMIO_SIZE	0x10000000	/* 256M */
+#define CONFIG_SYS_PCI1_IO_BASE	0x00000000
+#define CONFIG_SYS_PCI1_IO_PHYS	0xE2000000
+#define CONFIG_SYS_PCI1_IO_SIZE	0x01000000	/* 16M */
 
 #ifdef CONFIG_MPC83XX_PCI2
-#define CFG_PCI2_MEM_BASE	(CFG_PCI1_MMIO_BASE + CFG_PCI1_MMIO_SIZE)
-#define CFG_PCI2_MEM_PHYS	CFG_PCI2_MEM_BASE
-#define CFG_PCI2_MEM_SIZE	0x10000000	/* 256M */
-#define CFG_PCI2_MMIO_BASE	(CFG_PCI2_MEM_BASE + CFG_PCI2_MEM_SIZE)
-#define CFG_PCI2_MMIO_PHYS	CFG_PCI2_MMIO_BASE
-#define CFG_PCI2_MMIO_SIZE	0x10000000	/* 256M */
-#define CFG_PCI2_IO_BASE	0x00000000
-#define CFG_PCI2_IO_PHYS	(CFG_PCI1_IO_PHYS + CFG_PCI1_IO_SIZE)
-#define CFG_PCI2_IO_SIZE	0x01000000	/* 16M */
+#define CONFIG_SYS_PCI2_MEM_BASE	(CONFIG_SYS_PCI1_MMIO_BASE + CONFIG_SYS_PCI1_MMIO_SIZE)
+#define CONFIG_SYS_PCI2_MEM_PHYS	CONFIG_SYS_PCI2_MEM_BASE
+#define CONFIG_SYS_PCI2_MEM_SIZE	0x10000000	/* 256M */
+#define CONFIG_SYS_PCI2_MMIO_BASE	(CONFIG_SYS_PCI2_MEM_BASE + CONFIG_SYS_PCI2_MEM_SIZE)
+#define CONFIG_SYS_PCI2_MMIO_PHYS	CONFIG_SYS_PCI2_MMIO_BASE
+#define CONFIG_SYS_PCI2_MMIO_SIZE	0x10000000	/* 256M */
+#define CONFIG_SYS_PCI2_IO_BASE	0x00000000
+#define CONFIG_SYS_PCI2_IO_PHYS	(CONFIG_SYS_PCI1_IO_PHYS + CONFIG_SYS_PCI1_IO_SIZE)
+#define CONFIG_SYS_PCI2_IO_SIZE	0x01000000	/* 16M */
 #endif
 
 #define _IO_BASE		0x00000000	/* points to PCI I/O space */
@@ -359,7 +359,7 @@ boards, we say we have two, but don't display a message if we find only one. */
 
 #ifndef CONFIG_PCI_PNP
     #define PCI_ENET0_IOADDR	0x00000000
-    #define PCI_ENET0_MEMADDR	CFG_PCI2_MEM_BASE
+    #define PCI_ENET0_MEMADDR	CONFIG_SYS_PCI2_MEM_BASE
     #define PCI_IDSEL_NUMBER	0x0f	/* IDSEL = AD15 */
 #endif
 
@@ -387,7 +387,7 @@ boards, we say we have two, but don't display a message if we find only one. */
 #ifdef CONFIG_TSEC1
 #define CONFIG_HAS_ETH0
 #define CONFIG_TSEC1_NAME  "TSEC0"
-#define CFG_TSEC1_OFFSET	0x24000
+#define CONFIG_SYS_TSEC1_OFFSET	0x24000
 #define TSEC1_PHY_ADDR		0x1c	/* VSC8201 uses address 0x1c */
 #define TSEC1_PHYIDX		0
 #define TSEC1_FLAGS		TSEC_GIGABIT
@@ -396,7 +396,7 @@ boards, we say we have two, but don't display a message if we find only one. */
 #ifdef CONFIG_TSEC2
 #define CONFIG_HAS_ETH1
 #define CONFIG_TSEC2_NAME  "TSEC1"
-#define CFG_TSEC2_OFFSET	0x25000
+#define CONFIG_SYS_TSEC2_OFFSET	0x25000
 
 #define TSEC2_PHY_ADDR		4
 #define TSEC2_PHYIDX		0
@@ -412,21 +412,21 @@ boards, we say we have two, but don't display a message if we find only one. */
  */
 #define CONFIG_ENV_OVERWRITE
 
-#ifndef CFG_RAMBOOT
-  #define CFG_ENV_IS_IN_FLASH
-  #define CFG_ENV_ADDR		(CFG_MONITOR_BASE + CFG_MONITOR_LEN)
-  #define CFG_ENV_SECT_SIZE	0x10000 /* 64K (one sector) for environment */
-  #define CFG_ENV_SIZE		0x2000
+#ifndef CONFIG_SYS_RAMBOOT
+  #define CONFIG_ENV_IS_IN_FLASH
+  #define CONFIG_ENV_ADDR		(CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)
+  #define CONFIG_ENV_SECT_SIZE	0x10000 /* 64K (one sector) for environment */
+  #define CONFIG_ENV_SIZE		0x2000
 #else
-  #define CFG_NO_FLASH		/* Flash is not usable now */
+  #define CONFIG_SYS_NO_FLASH		/* Flash is not usable now */
   #undef  CONFIG_FLASH_CFI_DRIVER
-  #define CFG_ENV_IS_NOWHERE	/* Store ENV in memory only */
-  #define CFG_ENV_ADDR		(CFG_MONITOR_BASE - 0x1000)
-  #define CFG_ENV_SIZE		0x2000
+  #define CONFIG_ENV_IS_NOWHERE	/* Store ENV in memory only */
+  #define CONFIG_ENV_ADDR		(CONFIG_SYS_MONITOR_BASE - 0x1000)
+  #define CONFIG_ENV_SIZE		0x2000
 #endif
 
 #define CONFIG_LOADS_ECHO	/* echo on for serial download */
-#define CFG_LOADS_BAUD_CHANGE	/* allow baudrate change */
+#define CONFIG_SYS_LOADS_BAUD_CHANGE	/* allow baudrate change */
 
 /*
  * BOOTP options
@@ -468,47 +468,47 @@ boards, we say we have two, but don't display a message if we find only one. */
 /*
  * Miscellaneous configurable options
  */
-#define CFG_LONGHELP			/* undef to save memory */
+#define CONFIG_SYS_LONGHELP			/* undef to save memory */
 #define CONFIG_CMDLINE_EDITING		/* Command-line editing */
-#define CFG_HUSH_PARSER			/* Use the HUSH parser */
-#define CFG_PROMPT_HUSH_PS2 "> "
+#define CONFIG_SYS_HUSH_PARSER			/* Use the HUSH parser */
+#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
 
-#define CFG_LOAD_ADDR	0x2000000	/* default load address */
+#define CONFIG_SYS_LOAD_ADDR	0x2000000	/* default load address */
 #define CONFIG_LOADADDR	500000	/* default location for tftp and bootm */
 
 #ifdef CONFIG_MPC8349ITX
-#define CFG_PROMPT	"MPC8349E-mITX> "	/* Monitor Command Prompt */
+#define CONFIG_SYS_PROMPT	"MPC8349E-mITX> "	/* Monitor Command Prompt */
 #else
-#define CFG_PROMPT	"MPC8349E-mITX-GP> "	/* Monitor Command Prompt */
+#define CONFIG_SYS_PROMPT	"MPC8349E-mITX-GP> "	/* Monitor Command Prompt */
 #endif
 
 #if defined(CONFIG_CMD_KGDB)
-    #define CFG_CBSIZE	1024		/* Console I/O Buffer Size */
+    #define CONFIG_SYS_CBSIZE	1024		/* Console I/O Buffer Size */
 #else
-    #define CFG_CBSIZE	256		/* Console I/O Buffer Size */
+    #define CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size */
 #endif
 
-#define CFG_PBSIZE	(CFG_CBSIZE + sizeof(CFG_PROMPT) + 16) /* Print Buffer Size */
-#define CFG_MAXARGS	16		/* max number of command args */
-#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size */
-#define CFG_HZ		1000		/* decrementer freq: 1ms ticks */
+#define CONFIG_SYS_PBSIZE	(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) /* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS	16		/* max number of command args */
+#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size */
+#define CONFIG_SYS_HZ		1000		/* decrementer freq: 1ms ticks */
 
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define CFG_BOOTMAPSZ	(8 << 20)	/* Initial Memory map for Linux*/
+#define CONFIG_SYS_BOOTMAPSZ	(8 << 20)	/* Initial Memory map for Linux*/
 
-#define CFG_HRCW_LOW (\
+#define CONFIG_SYS_HRCW_LOW (\
 	HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\
 	HRCWL_DDR_TO_SCB_CLK_1X1 |\
 	HRCWL_CSB_TO_CLKIN_4X1 |\
 	HRCWL_VCO_1X2 |\
 	HRCWL_CORE_TO_CSB_2X1)
 
-#ifdef CFG_LOWBOOT
-#define CFG_HRCW_HIGH (\
+#ifdef CONFIG_SYS_LOWBOOT
+#define CONFIG_SYS_HRCW_HIGH (\
 	HRCWH_PCI_HOST |\
 	HRCWH_32_BIT_PCI |\
 	HRCWH_PCI1_ARBITER_ENABLE |\
@@ -521,7 +521,7 @@ boards, we say we have two, but don't display a message if we find only one. */
 	HRCWH_TSEC1M_IN_GMII |\
 	HRCWH_TSEC2M_IN_GMII )
 #else
-#define CFG_HRCW_HIGH (\
+#define CONFIG_SYS_HRCW_HIGH (\
 	HRCWH_PCI_HOST |\
 	HRCWH_32_BIT_PCI |\
 	HRCWH_PCI1_ARBITER_ENABLE |\
@@ -538,81 +538,81 @@ boards, we say we have two, but don't display a message if we find only one. */
 /*
  * System performance
  */
-#define CFG_ACR_PIPE_DEP	3	/* Arbiter pipeline depth (0-3) */
-#define CFG_ACR_RPTCNT		3	/* Arbiter repeat count (0-7) */
-#define CFG_SPCR_TSEC1EP	3	/* TSEC1 emergency priority (0-3) */
-#define CFG_SPCR_TSEC2EP	3	/* TSEC2 emergency priority (0-3) */
-#define CFG_SCCR_TSEC1CM	1	/* TSEC1 clock mode (0-3) */
-#define CFG_SCCR_TSEC2CM	1	/* TSEC2 & I2C0 clock mode (0-3) */
+#define CONFIG_SYS_ACR_PIPE_DEP	3	/* Arbiter pipeline depth (0-3) */
+#define CONFIG_SYS_ACR_RPTCNT		3	/* Arbiter repeat count (0-7) */
+#define CONFIG_SYS_SPCR_TSEC1EP	3	/* TSEC1 emergency priority (0-3) */
+#define CONFIG_SYS_SPCR_TSEC2EP	3	/* TSEC2 emergency priority (0-3) */
+#define CONFIG_SYS_SCCR_TSEC1CM	1	/* TSEC1 clock mode (0-3) */
+#define CONFIG_SYS_SCCR_TSEC2CM	1	/* TSEC2 & I2C0 clock mode (0-3) */
 
 /*
  * System IO Config
  */
-#define CFG_SICRH SICRH_TSOBI1	/* Needed for gigabit to work on TSEC 1 */
-#define CFG_SICRL (SICRL_LDP_A | SICRL_USB1)
+#define CONFIG_SYS_SICRH SICRH_TSOBI1	/* Needed for gigabit to work on TSEC 1 */
+#define CONFIG_SYS_SICRL (SICRL_LDP_A | SICRL_USB1)
 
-#define CFG_HID0_INIT	0x000000000
-#define CFG_HID0_FINAL	CFG_HID0_INIT
+#define CONFIG_SYS_HID0_INIT	0x000000000
+#define CONFIG_SYS_HID0_FINAL	CONFIG_SYS_HID0_INIT
 
-#define CFG_HID2	HID2_HBE
+#define CONFIG_SYS_HID2	HID2_HBE
 #define CONFIG_HIGH_BATS	1	/* High BATs supported */
 
 /* DDR  */
-#define CFG_IBAT0L	(CFG_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
-#define CFG_IBAT0U	(CFG_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CONFIG_SYS_IBAT0L	(CONFIG_SYS_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
+#define CONFIG_SYS_IBAT0U	(CONFIG_SYS_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
 
 /* PCI  */
 #ifdef CONFIG_PCI
-#define CFG_IBAT1L	(CFG_PCI1_MEM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
-#define CFG_IBAT1U	(CFG_PCI1_MEM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
-#define CFG_IBAT2L	(CFG_PCI1_MMIO_BASE | BATL_PP_10 | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
-#define CFG_IBAT2U	(CFG_PCI1_MMIO_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CONFIG_SYS_IBAT1L	(CONFIG_SYS_PCI1_MEM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
+#define CONFIG_SYS_IBAT1U	(CONFIG_SYS_PCI1_MEM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CONFIG_SYS_IBAT2L	(CONFIG_SYS_PCI1_MMIO_BASE | BATL_PP_10 | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
+#define CONFIG_SYS_IBAT2U	(CONFIG_SYS_PCI1_MMIO_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
 #else
-#define CFG_IBAT1L	0
-#define CFG_IBAT1U	0
-#define CFG_IBAT2L	0
-#define CFG_IBAT2U	0
+#define CONFIG_SYS_IBAT1L	0
+#define CONFIG_SYS_IBAT1U	0
+#define CONFIG_SYS_IBAT2L	0
+#define CONFIG_SYS_IBAT2U	0
 #endif
 
 #ifdef CONFIG_MPC83XX_PCI2
-#define CFG_IBAT3L	(CFG_PCI2_MEM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
-#define CFG_IBAT3U	(CFG_PCI2_MEM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
-#define CFG_IBAT4L	(CFG_PCI2_MMIO_BASE | BATL_PP_10 | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
-#define CFG_IBAT4U	(CFG_PCI2_MMIO_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CONFIG_SYS_IBAT3L	(CONFIG_SYS_PCI2_MEM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
+#define CONFIG_SYS_IBAT3U	(CONFIG_SYS_PCI2_MEM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CONFIG_SYS_IBAT4L	(CONFIG_SYS_PCI2_MMIO_BASE | BATL_PP_10 | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
+#define CONFIG_SYS_IBAT4U	(CONFIG_SYS_PCI2_MMIO_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
 #else
-#define CFG_IBAT3L	0
-#define CFG_IBAT3U	0
-#define CFG_IBAT4L	0
-#define CFG_IBAT4U	0
+#define CONFIG_SYS_IBAT3L	0
+#define CONFIG_SYS_IBAT3U	0
+#define CONFIG_SYS_IBAT4L	0
+#define CONFIG_SYS_IBAT4U	0
 #endif
 
 /* IMMRBAR @ 0xE0000000, PCI IO @ 0xE2000000 & BCSR @ 0xE2400000 */
-#define CFG_IBAT5L	(CFG_IMMR | BATL_PP_10 | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
-#define CFG_IBAT5U	(CFG_IMMR | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CONFIG_SYS_IBAT5L	(CONFIG_SYS_IMMR | BATL_PP_10 | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
+#define CONFIG_SYS_IBAT5U	(CONFIG_SYS_IMMR | BATU_BL_256M | BATU_VS | BATU_VP)
 
 /* SDRAM @ 0xF0000000, stack in DCACHE 0xFDF00000 & FLASH @ 0xFE000000 */
-#define CFG_IBAT6L	(0xF0000000 | BATL_PP_10 | BATL_MEMCOHERENCE)
-#define CFG_IBAT6U	(0xF0000000 | BATU_BL_256M | BATU_VS | BATU_VP)
-
-#define CFG_IBAT7L	0
-#define CFG_IBAT7U	0
-
-#define CFG_DBAT0L	CFG_IBAT0L
-#define CFG_DBAT0U	CFG_IBAT0U
-#define CFG_DBAT1L	CFG_IBAT1L
-#define CFG_DBAT1U	CFG_IBAT1U
-#define CFG_DBAT2L	CFG_IBAT2L
-#define CFG_DBAT2U	CFG_IBAT2U
-#define CFG_DBAT3L	CFG_IBAT3L
-#define CFG_DBAT3U	CFG_IBAT3U
-#define CFG_DBAT4L	CFG_IBAT4L
-#define CFG_DBAT4U	CFG_IBAT4U
-#define CFG_DBAT5L	CFG_IBAT5L
-#define CFG_DBAT5U	CFG_IBAT5U
-#define CFG_DBAT6L	CFG_IBAT6L
-#define CFG_DBAT6U	CFG_IBAT6U
-#define CFG_DBAT7L	CFG_IBAT7L
-#define CFG_DBAT7U	CFG_IBAT7U
+#define CONFIG_SYS_IBAT6L	(0xF0000000 | BATL_PP_10 | BATL_MEMCOHERENCE)
+#define CONFIG_SYS_IBAT6U	(0xF0000000 | BATU_BL_256M | BATU_VS | BATU_VP)
+
+#define CONFIG_SYS_IBAT7L	0
+#define CONFIG_SYS_IBAT7U	0
+
+#define CONFIG_SYS_DBAT0L	CONFIG_SYS_IBAT0L
+#define CONFIG_SYS_DBAT0U	CONFIG_SYS_IBAT0U
+#define CONFIG_SYS_DBAT1L	CONFIG_SYS_IBAT1L
+#define CONFIG_SYS_DBAT1U	CONFIG_SYS_IBAT1U
+#define CONFIG_SYS_DBAT2L	CONFIG_SYS_IBAT2L
+#define CONFIG_SYS_DBAT2U	CONFIG_SYS_IBAT2U
+#define CONFIG_SYS_DBAT3L	CONFIG_SYS_IBAT3L
+#define CONFIG_SYS_DBAT3U	CONFIG_SYS_IBAT3U
+#define CONFIG_SYS_DBAT4L	CONFIG_SYS_IBAT4L
+#define CONFIG_SYS_DBAT4U	CONFIG_SYS_IBAT4U
+#define CONFIG_SYS_DBAT5L	CONFIG_SYS_IBAT5L
+#define CONFIG_SYS_DBAT5U	CONFIG_SYS_IBAT5U
+#define CONFIG_SYS_DBAT6L	CONFIG_SYS_IBAT6L
+#define CONFIG_SYS_DBAT6U	CONFIG_SYS_IBAT6U
+#define CONFIG_SYS_DBAT7L	CONFIG_SYS_IBAT7L
+#define CONFIG_SYS_DBAT7U	CONFIG_SYS_IBAT7U
 
 /*
  * Internal Definitions
diff --git a/include/configs/MPC8360EMDS.h b/include/configs/MPC8360EMDS.h
index 43d4118b6..fbd2457aa 100644
--- a/include/configs/MPC8360EMDS.h
+++ b/include/configs/MPC8360EMDS.h
@@ -49,7 +49,7 @@
 /*
  * Hardware Reset Configuration Word
  */
-#define CFG_HRCW_LOW (\
+#define CONFIG_SYS_HRCW_LOW (\
 	HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\
 	HRCWL_DDR_TO_SCB_CLK_1X1 |\
 	HRCWL_CSB_TO_CLKIN_4X1 |\
@@ -60,7 +60,7 @@
 	HRCWL_CORE_TO_CSB_2X1)
 
 #ifdef CONFIG_PCISLAVE
-#define CFG_HRCW_HIGH (\
+#define CONFIG_SYS_HRCW_HIGH (\
 	HRCWH_PCI_AGENT |\
 	HRCWH_PCI1_ARBITER_DISABLE |\
 	HRCWH_PCICKDRV_DISABLE |\
@@ -70,7 +70,7 @@
 	HRCWH_SW_WATCHDOG_DISABLE |\
 	HRCWH_ROM_LOC_LOCAL_16BIT)
 #else
-#define CFG_HRCW_HIGH (\
+#define CONFIG_SYS_HRCW_HIGH (\
 	HRCWH_PCI_HOST |\
 	HRCWH_PCI1_ARBITER_ENABLE |\
 	HRCWH_PCICKDRV_ENABLE |\
@@ -84,8 +84,8 @@
 /*
  * System IO Config
  */
-#define CFG_SICRH		0x00000000
-#define CFG_SICRL		0x40000000
+#define CONFIG_SYS_SICRH		0x00000000
+#define CONFIG_SYS_SICRL		0x40000000
 
 #define CONFIG_BOARD_EARLY_INIT_F /* call board_pre_init */
 #define CONFIG_BOARD_EARLY_INIT_R
@@ -93,18 +93,19 @@
 /*
  * IMMR new address
  */
-#define CFG_IMMR		0xE0000000
+#define CONFIG_SYS_IMMR		0xE0000000
 
 /*
  * DDR Setup
  */
-#define CFG_DDR_BASE		0x00000000 /* DDR is system memory */
-#define CFG_SDRAM_BASE		CFG_DDR_BASE
-#define CFG_DDR_SDRAM_BASE	CFG_DDR_BASE
-#define CFG_DDR_SDRAM_CLK_CNTL	(DDR_SDRAM_CLK_CNTL_SS_EN | \
+#define CONFIG_SYS_DDR_BASE		0x00000000 /* DDR is system memory */
+#define CONFIG_SYS_SDRAM_BASE		CONFIG_SYS_DDR_BASE
+#define CONFIG_SYS_SDRAM_BASE2		(CONFIG_SYS_SDRAM_BASE + 0x10000000) /* + 256M */
+#define CONFIG_SYS_DDR_SDRAM_BASE	CONFIG_SYS_DDR_BASE
+#define CONFIG_SYS_DDR_SDRAM_CLK_CNTL	(DDR_SDRAM_CLK_CNTL_SS_EN | \
 				DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05)
 
-#define CFG_83XX_DDR_USES_CS0
+#define CONFIG_SYS_83XX_DDR_USES_CS0
 
 #define CONFIG_DDR_ECC		/* support DDR ECC function */
 #define CONFIG_DDR_ECC_CMD	/* Use DDR ECC user commands */
@@ -112,7 +113,7 @@
 /*
  * DDRCDR - DDR Control Driver Register
  */
-#define CFG_DDRCDR_VALUE	0x80080001
+#define CONFIG_SYS_DDRCDR_VALUE	0x80080001
 
 #define CONFIG_SPD_EEPROM	/* Use SPD EEPROM for DDR setup */
 #if defined(CONFIG_SPD_EEPROM)
@@ -124,138 +125,135 @@
 /*
  * Manually set up DDR parameters
  */
-#define CFG_DDR_SIZE		256 /* MB */
+#define CONFIG_SYS_DDR_SIZE		256 /* MB */
 #if defined(CONFIG_DDR_II)
-#define CFG_DDRCDR		0x80080001
-#define CFG_DDR_CS0_BNDS	0x0000000f
-#define CFG_DDR_CS0_CONFIG	0x80330102
-#define CFG_DDR_TIMING_0	0x00220802
-#define CFG_DDR_TIMING_1	0x38357322
-#define CFG_DDR_TIMING_2	0x2f9048c8
-#define CFG_DDR_TIMING_3	0x00000000
-#define CFG_DDR_CLK_CNTL	0x02000000
-#define CFG_DDR_MODE		0x47d00432
-#define CFG_DDR_MODE2		0x8000c000
-#define CFG_DDR_INTERVAL	0x03cf0080
-#define CFG_DDR_SDRAM_CFG	0x43000000
-#define CFG_DDR_SDRAM_CFG2	0x00401000
+#define CONFIG_SYS_DDRCDR		0x80080001
+#define CONFIG_SYS_DDR_CS0_BNDS	0x0000000f
+#define CONFIG_SYS_DDR_CS0_CONFIG	0x80330102
+#define CONFIG_SYS_DDR_TIMING_0	0x00220802
+#define CONFIG_SYS_DDR_TIMING_1	0x38357322
+#define CONFIG_SYS_DDR_TIMING_2	0x2f9048c8
+#define CONFIG_SYS_DDR_TIMING_3	0x00000000
+#define CONFIG_SYS_DDR_CLK_CNTL	0x02000000
+#define CONFIG_SYS_DDR_MODE		0x47d00432
+#define CONFIG_SYS_DDR_MODE2		0x8000c000
+#define CONFIG_SYS_DDR_INTERVAL	0x03cf0080
+#define CONFIG_SYS_DDR_SDRAM_CFG	0x43000000
+#define CONFIG_SYS_DDR_SDRAM_CFG2	0x00401000
 #else
-#define CFG_DDR_CONFIG (CSCONFIG_EN | CSCONFIG_ROW_BIT_13 | CSCONFIG_COL_BIT_9)
-#define CFG_DDR_TIMING_1	0x37344321 /* tCL-tRCD-tRP-tRAS=2.5-3-3-7 */
-#define CFG_DDR_TIMING_2	0x00000800 /* may need tuning */
-#define CFG_DDR_CONTROL		0x42008000 /* Self refresh,2T timing */
-#define CFG_DDR_MODE		0x20000162 /* DLL,normal,seq,4/2.5 */
-#define CFG_DDR_INTERVAL	0x045b0100 /* page mode */
+#define CONFIG_SYS_DDR_CONFIG (CSCONFIG_EN | CSCONFIG_ROW_BIT_13 | CSCONFIG_COL_BIT_9)
+#define CONFIG_SYS_DDR_TIMING_1	0x37344321 /* tCL-tRCD-tRP-tRAS=2.5-3-3-7 */
+#define CONFIG_SYS_DDR_TIMING_2	0x00000800 /* may need tuning */
+#define CONFIG_SYS_DDR_CONTROL		0x42008000 /* Self refresh,2T timing */
+#define CONFIG_SYS_DDR_MODE		0x20000162 /* DLL,normal,seq,4/2.5 */
+#define CONFIG_SYS_DDR_INTERVAL	0x045b0100 /* page mode */
 #endif
 #endif
 
 /*
  * Memory test
  */
-#undef CFG_DRAM_TEST		/* memory test, takes time */
-#define CFG_MEMTEST_START	0x00000000 /* memtest region */
-#define CFG_MEMTEST_END		0x00100000
+#undef CONFIG_SYS_DRAM_TEST		/* memory test, takes time */
+#define CONFIG_SYS_MEMTEST_START	0x00000000 /* memtest region */
+#define CONFIG_SYS_MEMTEST_END		0x00100000
 
 /*
  * The reserved memory
  */
 
-#define CFG_MONITOR_BASE	TEXT_BASE /* start of monitor */
+#define CONFIG_SYS_MONITOR_BASE	TEXT_BASE /* start of monitor */
 
-#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
-#define CFG_RAMBOOT
+#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
+#define CONFIG_SYS_RAMBOOT
 #else
-#undef	CFG_RAMBOOT
+#undef	CONFIG_SYS_RAMBOOT
 #endif
 
-/* CFG_MONITOR_LEN must be a multiple of CFG_ENV_SECT_SIZE */
-#define CFG_MONITOR_LEN		(256 * 1024) /* Reserve 256 kB for Mon */
-#define CFG_MALLOC_LEN		(128 * 1024) /* Reserved for malloc */
+/* CONFIG_SYS_MONITOR_LEN must be a multiple of CONFIG_ENV_SECT_SIZE */
+#define CONFIG_SYS_MONITOR_LEN		(256 * 1024) /* Reserve 256 kB for Mon */
+#define CONFIG_SYS_MALLOC_LEN		(128 * 1024) /* Reserved for malloc */
 
 /*
  * Initial RAM Base Address Setup
  */
-#define CFG_INIT_RAM_LOCK	1
-#define CFG_INIT_RAM_ADDR	0xE6000000 /* Initial RAM address */
-#define CFG_INIT_RAM_END	0x1000 /* End of used area in RAM */
-#define CFG_GBL_DATA_SIZE	0x100 /* num bytes initial data */
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_RAM_LOCK	1
+#define CONFIG_SYS_INIT_RAM_ADDR	0xE6000000 /* Initial RAM address */
+#define CONFIG_SYS_INIT_RAM_END	0x1000 /* End of used area in RAM */
+#define CONFIG_SYS_GBL_DATA_SIZE	0x100 /* num bytes initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
 
 /*
  * Local Bus Configuration & Clock Setup
  */
-#define CFG_LCRR		(LCRR_DBYP | LCRR_CLKDIV_4)
-#define CFG_LBC_LBCR		0x00000000
+#define CONFIG_SYS_LCRR		(LCRR_DBYP | LCRR_CLKDIV_4)
+#define CONFIG_SYS_LBC_LBCR		0x00000000
 
 /*
  * FLASH on the Local Bus
  */
-#define CFG_FLASH_CFI		/* use the Common Flash Interface */
+#define CONFIG_SYS_FLASH_CFI		/* use the Common Flash Interface */
 #define CONFIG_FLASH_CFI_DRIVER	/* use the CFI driver */
-#define CFG_FLASH_BASE		0xFE000000 /* FLASH base address */
-#define CFG_FLASH_SIZE		32 /* max FLASH size is 32M */
+#define CONFIG_SYS_FLASH_BASE		0xFE000000 /* FLASH base address */
+#define CONFIG_SYS_FLASH_SIZE		32 /* max FLASH size is 32M */
+#define CONFIG_SYS_FLASH_PROTECTION	1		/* Use h/w Flash protection. */
 #define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */
 
-#define CFG_LBLAWBAR0_PRELIM	CFG_FLASH_BASE /* Window base at flash base */
-#define CFG_LBLAWAR0_PRELIM	0x80000018 /* 32MB window size */
+#define CONFIG_SYS_LBLAWBAR0_PRELIM	CONFIG_SYS_FLASH_BASE /* Window base at flash base */
+#define CONFIG_SYS_LBLAWAR0_PRELIM	0x80000018 /* 32MB window size */
 
-#define CFG_BR0_PRELIM	(CFG_FLASH_BASE | /* Flash Base address */ \
+#define CONFIG_SYS_BR0_PRELIM	(CONFIG_SYS_FLASH_BASE | /* Flash Base address */ \
 			(2 << BR_PS_SHIFT) | /* 16 bit port size */ \
 			BR_V)	/* valid */
-#define CFG_OR0_PRELIM		((~(CFG_FLASH_SIZE - 1) << 20) | OR_UPM_XAM | \
+#define CONFIG_SYS_OR0_PRELIM		((~(CONFIG_SYS_FLASH_SIZE - 1) << 20) | OR_UPM_XAM | \
 				OR_GPCM_CSNT | OR_GPCM_ACS_DIV2 | OR_GPCM_XACS | OR_GPCM_SCY_15 | \
 				OR_GPCM_TRLX | OR_GPCM_EHTR | OR_GPCM_EAD)
 
-#define CFG_MAX_FLASH_BANKS	1 /* number of banks */
-#define CFG_MAX_FLASH_SECT	256 /* max sectors per device */
+#define CONFIG_SYS_MAX_FLASH_BANKS	1 /* number of banks */
+#define CONFIG_SYS_MAX_FLASH_SECT	256 /* max sectors per device */
 
-#undef	CFG_FLASH_CHECKSUM
+#undef	CONFIG_SYS_FLASH_CHECKSUM
 
 /*
  * BCSR on the Local Bus
  */
-#define CFG_BCSR		0xF8000000
-#define CFG_LBLAWBAR1_PRELIM	CFG_BCSR /* Access window base at BCSR base */
-#define CFG_LBLAWAR1_PRELIM	0x8000000F /* Access window size 64K */
+#define CONFIG_SYS_BCSR		0xF8000000
+#define CONFIG_SYS_LBLAWBAR1_PRELIM	CONFIG_SYS_BCSR /* Access window base at BCSR base */
+#define CONFIG_SYS_LBLAWAR1_PRELIM	0x8000000F /* Access window size 64K */
 
-#define CFG_BR1_PRELIM		(CFG_BCSR|0x00000801) /* Port size=8bit, MSEL=GPCM */
-#define CFG_OR1_PRELIM		0xFFFFE9f7 /* length 32K */
+#define CONFIG_SYS_BR1_PRELIM		(CONFIG_SYS_BCSR|0x00000801) /* Port size=8bit, MSEL=GPCM */
+#define CONFIG_SYS_OR1_PRELIM		0xFFFFE9f7 /* length 32K */
 
 /*
  * SDRAM on the Local Bus
  */
-#define CFG_LBC_SDRAM_BASE	0xF0000000	/* SDRAM base address */
-#define CFG_LBC_SDRAM_SIZE	64		/* LBC SDRAM is 64MB */
+#define CONFIG_SYS_LBC_SDRAM_BASE	0xF0000000	/* SDRAM base address */
+#define CONFIG_SYS_LBC_SDRAM_SIZE	64		/* LBC SDRAM is 64MB */
 
-#define CFG_LB_SDRAM		/* if board has SRDAM on local bus */
+#define CONFIG_SYS_LB_SDRAM		/* if board has SRDAM on local bus */
 
-#ifdef CFG_LB_SDRAM
-#define CFG_LBLAWBAR2_PRELIM	CFG_LBC_SDRAM_BASE
-#define CFG_LBLAWAR2_PRELIM	0x80000019 /* 64MB */
+#ifdef CONFIG_SYS_LB_SDRAM
+#define CONFIG_SYS_LBLAWBAR2		0
+#define CONFIG_SYS_LBLAWAR2		0x80000019 /* 64MB */
 
 /*local bus BR2, OR2 definition for SDRAM if soldered on the EPB board */
 /*
  * Base Register 2 and Option Register 2 configure SDRAM.
- * The SDRAM base address, CFG_LBC_SDRAM_BASE, is 0xf0000000.
  *
  * For BR2, need:
- *    Base address of 0xf0000000 = BR[0:16] = 1111 0000 0000 0000 0
+ *    Base address = BR[0:16] = dynamic
  *    port size = 32-bits = BR2[19:20] = 11
  *    no parity checking = BR2[21:22] = 00
  *    SDRAM for MSEL = BR2[24:26] = 011
  *    Valid = BR[31] = 1
  *
  * 0	4    8	  12   16   20	 24   28
- * 1111 0000 0000 0000 0001 1000 0110 0001 = f0001861
- *
- * CFG_LBC_SDRAM_BASE should be masked and OR'ed into
- * the top 17 bits of BR2.
+ * xxxx xxxx xxxx xxxx x001 1000 0110 0001 = 00001861
  */
 
-#define CFG_BR2_PRELIM	0xf0001861 /*Port size=32bit, MSEL=SDRAM */
+#define CONFIG_SYS_BR2		0x00001861 /*Port size=32bit, MSEL=SDRAM */
 
 /*
- * The SDRAM size in MB, CFG_LBC_SDRAM_SIZE, is 64.
+ * The SDRAM size in MB, CONFIG_SYS_LBC_SDRAM_SIZE, is 64.
  *
  * For OR2, need:
  *    64MB mask for AM, OR2[0:7] = 1111 1100
@@ -268,80 +266,80 @@
  * 1111 1100 0000 0000 0110 1001 0000 0001 = fc006901
  */
 
-#define CFG_OR2_PRELIM	0xfc006901
+#define CONFIG_SYS_OR2		0xfc006901
 
-#define CFG_LBC_LSRT	0x32000000 /* LB sdram refresh timer, about 6us */
-#define CFG_LBC_MRTPR	0x20000000 /* LB refresh timer prescal, 266MHz/32 */
+#define CONFIG_SYS_LBC_LSRT	0x32000000 /* LB sdram refresh timer, about 6us */
+#define CONFIG_SYS_LBC_MRTPR	0x20000000 /* LB refresh timer prescal, 266MHz/32 */
 
 /*
  * LSDMR masks
  */
-#define CFG_LBC_LSDMR_OP_NORMAL (0 << (31 - 4))
-#define CFG_LBC_LSDMR_OP_ARFRSH (1 << (31 - 4))
-#define CFG_LBC_LSDMR_OP_SRFRSH (2 << (31 - 4))
-#define CFG_LBC_LSDMR_OP_MRW	(3 << (31 - 4))
-#define CFG_LBC_LSDMR_OP_PRECH	(4 << (31 - 4))
-#define CFG_LBC_LSDMR_OP_PCHALL (5 << (31 - 4))
-#define CFG_LBC_LSDMR_OP_ACTBNK (6 << (31 - 4))
-#define CFG_LBC_LSDMR_OP_RWINV	(7 << (31 - 4))
+#define CONFIG_SYS_LBC_LSDMR_OP_NORMAL (0 << (31 - 4))
+#define CONFIG_SYS_LBC_LSDMR_OP_ARFRSH (1 << (31 - 4))
+#define CONFIG_SYS_LBC_LSDMR_OP_SRFRSH (2 << (31 - 4))
+#define CONFIG_SYS_LBC_LSDMR_OP_MRW	(3 << (31 - 4))
+#define CONFIG_SYS_LBC_LSDMR_OP_PRECH	(4 << (31 - 4))
+#define CONFIG_SYS_LBC_LSDMR_OP_PCHALL (5 << (31 - 4))
+#define CONFIG_SYS_LBC_LSDMR_OP_ACTBNK (6 << (31 - 4))
+#define CONFIG_SYS_LBC_LSDMR_OP_RWINV	(7 << (31 - 4))
 
-#define CFG_LBC_LSDMR_COMMON	0x0063b723
+#define CONFIG_SYS_LBC_LSDMR_COMMON	0x0063b723
 
 /*
  * SDRAM Controller configuration sequence.
  */
-#define CFG_LBC_LSDMR_1		( CFG_LBC_LSDMR_COMMON \
-				| CFG_LBC_LSDMR_OP_PCHALL)
-#define CFG_LBC_LSDMR_2		( CFG_LBC_LSDMR_COMMON \
-				| CFG_LBC_LSDMR_OP_ARFRSH)
-#define CFG_LBC_LSDMR_3		( CFG_LBC_LSDMR_COMMON \
-				| CFG_LBC_LSDMR_OP_ARFRSH)
-#define CFG_LBC_LSDMR_4		( CFG_LBC_LSDMR_COMMON \
-				| CFG_LBC_LSDMR_OP_MRW)
-#define CFG_LBC_LSDMR_5		( CFG_LBC_LSDMR_COMMON \
-				| CFG_LBC_LSDMR_OP_NORMAL)
+#define CONFIG_SYS_LBC_LSDMR_1		( CONFIG_SYS_LBC_LSDMR_COMMON \
+				| CONFIG_SYS_LBC_LSDMR_OP_PCHALL)
+#define CONFIG_SYS_LBC_LSDMR_2		( CONFIG_SYS_LBC_LSDMR_COMMON \
+				| CONFIG_SYS_LBC_LSDMR_OP_ARFRSH)
+#define CONFIG_SYS_LBC_LSDMR_3		( CONFIG_SYS_LBC_LSDMR_COMMON \
+				| CONFIG_SYS_LBC_LSDMR_OP_ARFRSH)
+#define CONFIG_SYS_LBC_LSDMR_4		( CONFIG_SYS_LBC_LSDMR_COMMON \
+				| CONFIG_SYS_LBC_LSDMR_OP_MRW)
+#define CONFIG_SYS_LBC_LSDMR_5		( CONFIG_SYS_LBC_LSDMR_COMMON \
+				| CONFIG_SYS_LBC_LSDMR_OP_NORMAL)
 
 #endif
 
 /*
  * Windows to access PIB via local bus
  */
-#define CFG_LBLAWBAR3_PRELIM	0xf8010000 /* windows base 0xf8010000 */
-#define CFG_LBLAWAR3_PRELIM	0x8000000e /* windows size 32KB */
+#define CONFIG_SYS_LBLAWBAR3_PRELIM	0xf8010000 /* windows base 0xf8010000 */
+#define CONFIG_SYS_LBLAWAR3_PRELIM	0x8000000e /* windows size 32KB */
 
 /*
  * CS4 on Local Bus, to PIB
  */
-#define CFG_BR4_PRELIM	0xf8010801 /* CS4 base address at 0xf8010000 */
-#define CFG_OR4_PRELIM	0xffffe9f7 /* size 32KB, port size 8bit, GPCM */
+#define CONFIG_SYS_BR4_PRELIM	0xf8010801 /* CS4 base address at 0xf8010000 */
+#define CONFIG_SYS_OR4_PRELIM	0xffffe9f7 /* size 32KB, port size 8bit, GPCM */
 
 /*
  * CS5 on Local Bus, to PIB
  */
-#define CFG_BR5_PRELIM	0xf8008801 /* CS5 base address at 0xf8008000 */
-#define CFG_OR5_PRELIM	0xffffe9f7 /* size 32KB, port size 8bit, GPCM */
+#define CONFIG_SYS_BR5_PRELIM	0xf8008801 /* CS5 base address at 0xf8008000 */
+#define CONFIG_SYS_OR5_PRELIM	0xffffe9f7 /* size 32KB, port size 8bit, GPCM */
 
 /*
  * Serial Port
  */
 #define CONFIG_CONS_INDEX	1
 #undef	CONFIG_SERIAL_SOFTWARE_FIFO
-#define CFG_NS16550
-#define CFG_NS16550_SERIAL
-#define CFG_NS16550_REG_SIZE	1
-#define CFG_NS16550_CLK		get_bus_freq(0)
+#define CONFIG_SYS_NS16550
+#define CONFIG_SYS_NS16550_SERIAL
+#define CONFIG_SYS_NS16550_REG_SIZE	1
+#define CONFIG_SYS_NS16550_CLK		get_bus_freq(0)
 
-#define CFG_BAUDRATE_TABLE  \
+#define CONFIG_SYS_BAUDRATE_TABLE  \
 	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200}
 
-#define CFG_NS16550_COM1	(CFG_IMMR+0x4500)
-#define CFG_NS16550_COM2	(CFG_IMMR+0x4600)
+#define CONFIG_SYS_NS16550_COM1	(CONFIG_SYS_IMMR+0x4500)
+#define CONFIG_SYS_NS16550_COM2	(CONFIG_SYS_IMMR+0x4600)
 
 #define CONFIG_CMDLINE_EDITING	1	/* add command line history	*/
 /* Use the HUSH parser */
-#define CFG_HUSH_PARSER
-#ifdef	CFG_HUSH_PARSER
-#define CFG_PROMPT_HUSH_PS2 "> "
+#define CONFIG_SYS_HUSH_PARSER
+#ifdef	CONFIG_SYS_HUSH_PARSER
+#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
 #endif
 
 /* pass open firmware flat tree */
@@ -353,35 +351,35 @@
 #define CONFIG_HARD_I2C		/* I2C with hardware support */
 #undef	CONFIG_SOFT_I2C		/* I2C bit-banged */
 #define CONFIG_FSL_I2C
-#define CFG_I2C_SPEED	400000	/* I2C speed and slave address */
-#define CFG_I2C_SLAVE	0x7F
-#define CFG_I2C_NOPROBES	{0x52} /* Don't probe these addrs */
-#define CFG_I2C_OFFSET	0x3000
-#define CFG_I2C2_OFFSET 0x3100
+#define CONFIG_SYS_I2C_SPEED	400000	/* I2C speed and slave address */
+#define CONFIG_SYS_I2C_SLAVE	0x7F
+#define CONFIG_SYS_I2C_NOPROBES	{0x52} /* Don't probe these addrs */
+#define CONFIG_SYS_I2C_OFFSET	0x3000
+#define CONFIG_SYS_I2C2_OFFSET 0x3100
 
 /*
  * Config on-board RTC
  */
 #define CONFIG_RTC_DS1374		/* use ds1374 rtc via i2c */
-#define CFG_I2C_RTC_ADDR	0x68	/* at address 0x68 */
+#define CONFIG_SYS_I2C_RTC_ADDR	0x68	/* at address 0x68 */
 
 /*
  * General PCI
  * Addresses are mapped 1-1.
  */
-#define CFG_PCI_MEM_BASE	0x80000000
-#define CFG_PCI_MEM_PHYS	CFG_PCI_MEM_BASE
-#define CFG_PCI_MEM_SIZE	0x10000000 /* 256M */
-#define CFG_PCI_MMIO_BASE	0x90000000
-#define CFG_PCI_MMIO_PHYS	CFG_PCI_MMIO_BASE
-#define CFG_PCI_MMIO_SIZE	0x10000000 /* 256M */
-#define CFG_PCI_IO_BASE		0x00000000
-#define CFG_PCI_IO_PHYS		0xE0300000
-#define CFG_PCI_IO_SIZE		0x100000 /* 1M */
+#define CONFIG_SYS_PCI_MEM_BASE	0x80000000
+#define CONFIG_SYS_PCI_MEM_PHYS	CONFIG_SYS_PCI_MEM_BASE
+#define CONFIG_SYS_PCI_MEM_SIZE	0x10000000 /* 256M */
+#define CONFIG_SYS_PCI_MMIO_BASE	0x90000000
+#define CONFIG_SYS_PCI_MMIO_PHYS	CONFIG_SYS_PCI_MMIO_BASE
+#define CONFIG_SYS_PCI_MMIO_SIZE	0x10000000 /* 256M */
+#define CONFIG_SYS_PCI_IO_BASE		0x00000000
+#define CONFIG_SYS_PCI_IO_PHYS		0xE0300000
+#define CONFIG_SYS_PCI_IO_SIZE		0x100000 /* 1M */
 
-#define CFG_PCI_SLV_MEM_LOCAL	CFG_SDRAM_BASE
-#define CFG_PCI_SLV_MEM_BUS	0x00000000
-#define CFG_PCI_SLV_MEM_SIZE	0x80000000
+#define CONFIG_SYS_PCI_SLV_MEM_LOCAL	CONFIG_SYS_SDRAM_BASE
+#define CONFIG_SYS_PCI_SLV_MEM_BUS	0x00000000
+#define CONFIG_SYS_PCI_SLV_MEM_SIZE	0x80000000
 
 
 #ifdef CONFIG_PCI
@@ -391,7 +389,7 @@
 
 #undef CONFIG_EEPRO100
 #undef CONFIG_PCI_SCAN_SHOW	/* show pci devices on startup */
-#define CFG_PCI_SUBSYS_VENDORID 0x1957	/* Freescale */
+#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x1957	/* Freescale */
 
 #endif	/* CONFIG_PCI */
 
@@ -410,43 +408,43 @@
 #define CONFIG_UEC_ETH1		/* GETH1 */
 
 #ifdef CONFIG_UEC_ETH1
-#define CFG_UEC1_UCC_NUM	0	/* UCC1 */
-#define CFG_UEC1_RX_CLK		QE_CLK_NONE
-#define CFG_UEC1_TX_CLK		QE_CLK9
-#define CFG_UEC1_ETH_TYPE	GIGA_ETH
-#define CFG_UEC1_PHY_ADDR	0
-#define CFG_UEC1_INTERFACE_MODE ENET_1000_GMII
+#define CONFIG_SYS_UEC1_UCC_NUM	0	/* UCC1 */
+#define CONFIG_SYS_UEC1_RX_CLK		QE_CLK_NONE
+#define CONFIG_SYS_UEC1_TX_CLK		QE_CLK9
+#define CONFIG_SYS_UEC1_ETH_TYPE	GIGA_ETH
+#define CONFIG_SYS_UEC1_PHY_ADDR	0
+#define CONFIG_SYS_UEC1_INTERFACE_MODE ENET_1000_GMII
 #endif
 
 #define CONFIG_UEC_ETH2		/* GETH2 */
 
 #ifdef CONFIG_UEC_ETH2
-#define CFG_UEC2_UCC_NUM	1	/* UCC2 */
-#define CFG_UEC2_RX_CLK		QE_CLK_NONE
-#define CFG_UEC2_TX_CLK		QE_CLK4
-#define CFG_UEC2_ETH_TYPE	GIGA_ETH
-#define CFG_UEC2_PHY_ADDR	1
-#define CFG_UEC2_INTERFACE_MODE ENET_1000_GMII
+#define CONFIG_SYS_UEC2_UCC_NUM	1	/* UCC2 */
+#define CONFIG_SYS_UEC2_RX_CLK		QE_CLK_NONE
+#define CONFIG_SYS_UEC2_TX_CLK		QE_CLK4
+#define CONFIG_SYS_UEC2_ETH_TYPE	GIGA_ETH
+#define CONFIG_SYS_UEC2_PHY_ADDR	1
+#define CONFIG_SYS_UEC2_INTERFACE_MODE ENET_1000_GMII
 #endif
 
 /*
  * Environment
  */
 
-#ifndef CFG_RAMBOOT
-	#define CFG_ENV_IS_IN_FLASH	1
-	#define CFG_ENV_ADDR		(CFG_MONITOR_BASE + CFG_MONITOR_LEN)
-	#define CFG_ENV_SECT_SIZE	0x20000
-	#define CFG_ENV_SIZE		0x2000
+#ifndef CONFIG_SYS_RAMBOOT
+	#define CONFIG_ENV_IS_IN_FLASH	1
+	#define CONFIG_ENV_ADDR		(CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)
+	#define CONFIG_ENV_SECT_SIZE	0x20000
+	#define CONFIG_ENV_SIZE		0x2000
 #else
-	#define CFG_NO_FLASH		1	/* Flash is not usable now */
-	#define CFG_ENV_IS_NOWHERE	1	/* Store ENV in memory only */
-	#define CFG_ENV_ADDR		(CFG_MONITOR_BASE - 0x1000)
-	#define CFG_ENV_SIZE		0x2000
+	#define CONFIG_SYS_NO_FLASH		1	/* Flash is not usable now */
+	#define CONFIG_ENV_IS_NOWHERE	1	/* Store ENV in memory only */
+	#define CONFIG_ENV_ADDR		(CONFIG_SYS_MONITOR_BASE - 0x1000)
+	#define CONFIG_ENV_SIZE		0x2000
 #endif
 
 #define CONFIG_LOADS_ECHO	1	/* echo on for serial download */
-#define CFG_LOADS_BAUD_CHANGE	1	/* allow baudrate change */
+#define CONFIG_SYS_LOADS_BAUD_CHANGE	1	/* allow baudrate change */
 
 /*
  * BOOTP options
@@ -471,7 +469,7 @@
     #define CONFIG_CMD_PCI
 #endif
 
-#if defined(CFG_RAMBOOT)
+#if defined(CONFIG_SYS_RAMBOOT)
     #undef CONFIG_CMD_ENV
     #undef CONFIG_CMD_LOADS
 #endif
@@ -482,34 +480,34 @@
 /*
  * Miscellaneous configurable options
  */
-#define CFG_LONGHELP		/* undef to save memory */
-#define CFG_LOAD_ADDR		0x2000000 /* default load address */
-#define CFG_PROMPT		"=> "	/* Monitor Command Prompt */
+#define CONFIG_SYS_LONGHELP		/* undef to save memory */
+#define CONFIG_SYS_LOAD_ADDR		0x2000000 /* default load address */
+#define CONFIG_SYS_PROMPT		"=> "	/* Monitor Command Prompt */
 
 #if defined(CONFIG_CMD_KGDB)
-	#define CFG_CBSIZE	1024 /* Console I/O Buffer Size */
+	#define CONFIG_SYS_CBSIZE	1024 /* Console I/O Buffer Size */
 #else
-	#define CFG_CBSIZE	256 /* Console I/O Buffer Size */
+	#define CONFIG_SYS_CBSIZE	256 /* Console I/O Buffer Size */
 #endif
 
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define CFG_MAXARGS	16		/* max number of command args */
-#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size */
-#define CFG_HZ		1000		/* decrementer freq: 1ms ticks */
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS	16		/* max number of command args */
+#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size */
+#define CONFIG_SYS_HZ		1000		/* decrementer freq: 1ms ticks */
 
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define CFG_BOOTMAPSZ		(8 << 20) /* Initial Memory map for Linux */
+#define CONFIG_SYS_BOOTMAPSZ		(8 << 20) /* Initial Memory map for Linux */
 
 /*
  * Core HID Setup
  */
-#define CFG_HID0_INIT		0x000000000
-#define CFG_HID0_FINAL		HID0_ENABLE_MACHINE_CHECK
-#define CFG_HID2		HID2_HBE
+#define CONFIG_SYS_HID0_INIT		0x000000000
+#define CONFIG_SYS_HID0_FINAL		HID0_ENABLE_MACHINE_CHECK
+#define CONFIG_SYS_HID2		HID2_HBE
 
 /*
  * MMU Setup
@@ -517,66 +515,66 @@
 
 #define CONFIG_HIGH_BATS	1	/* High BATs supported */
 
-/* DDR: cache cacheable */
-#define CFG_IBAT0L	(CFG_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
-#define CFG_IBAT0U	(CFG_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
-#define CFG_DBAT0L	CFG_IBAT0L
-#define CFG_DBAT0U	CFG_IBAT0U
+/* DDR/LBC SDRAM: cacheable */
+#define CONFIG_SYS_IBAT0L	(CONFIG_SYS_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
+#define CONFIG_SYS_IBAT0U	(CONFIG_SYS_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CONFIG_SYS_DBAT0L	CONFIG_SYS_IBAT0L
+#define CONFIG_SYS_DBAT0U	CONFIG_SYS_IBAT0U
 
 /* IMMRBAR & PCI IO: cache-inhibit and guarded */
-#define CFG_IBAT1L	(CFG_IMMR | BATL_PP_10 | \
+#define CONFIG_SYS_IBAT1L	(CONFIG_SYS_IMMR | BATL_PP_10 | \
 			BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
-#define CFG_IBAT1U	(CFG_IMMR | BATU_BL_4M | BATU_VS | BATU_VP)
-#define CFG_DBAT1L	CFG_IBAT1L
-#define CFG_DBAT1U	CFG_IBAT1U
+#define CONFIG_SYS_IBAT1U	(CONFIG_SYS_IMMR | BATU_BL_4M | BATU_VS | BATU_VP)
+#define CONFIG_SYS_DBAT1L	CONFIG_SYS_IBAT1L
+#define CONFIG_SYS_DBAT1U	CONFIG_SYS_IBAT1U
 
 /* BCSR: cache-inhibit and guarded */
-#define CFG_IBAT2L	(CFG_BCSR | BATL_PP_10 | \
+#define CONFIG_SYS_IBAT2L	(CONFIG_SYS_BCSR | BATL_PP_10 | \
 			BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
-#define CFG_IBAT2U	(CFG_BCSR | BATU_BL_128K | BATU_VS | BATU_VP)
-#define CFG_DBAT2L	CFG_IBAT2L
-#define CFG_DBAT2U	CFG_IBAT2U
+#define CONFIG_SYS_IBAT2U	(CONFIG_SYS_BCSR | BATU_BL_128K | BATU_VS | BATU_VP)
+#define CONFIG_SYS_DBAT2L	CONFIG_SYS_IBAT2L
+#define CONFIG_SYS_DBAT2U	CONFIG_SYS_IBAT2U
 
 /* FLASH: icache cacheable, but dcache-inhibit and guarded */
-#define CFG_IBAT3L	(CFG_FLASH_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
-#define CFG_IBAT3U	(CFG_FLASH_BASE | BATU_BL_32M | BATU_VS | BATU_VP)
-#define CFG_DBAT3L	(CFG_FLASH_BASE | BATL_PP_10 | \
+#define CONFIG_SYS_IBAT3L	(CONFIG_SYS_FLASH_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
+#define CONFIG_SYS_IBAT3U	(CONFIG_SYS_FLASH_BASE | BATU_BL_32M | BATU_VS | BATU_VP)
+#define CONFIG_SYS_DBAT3L	(CONFIG_SYS_FLASH_BASE | BATL_PP_10 | \
 			BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
-#define CFG_DBAT3U	CFG_IBAT3U
+#define CONFIG_SYS_DBAT3U	CONFIG_SYS_IBAT3U
 
-/* Local bus SDRAM: cacheable */
-#define CFG_IBAT4L	(CFG_LBC_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
-#define CFG_IBAT4U	(CFG_LBC_SDRAM_BASE | BATU_BL_64M | BATU_VS | BATU_VP)
-#define CFG_DBAT4L	CFG_IBAT4L
-#define CFG_DBAT4U	CFG_IBAT4U
+/* DDR/LBC SDRAM next 256M: cacheable */
+#define CONFIG_SYS_IBAT4L	(CONFIG_SYS_SDRAM_BASE2 | BATL_PP_10 | BATL_MEMCOHERENCE)
+#define CONFIG_SYS_IBAT4U	(CONFIG_SYS_SDRAM_BASE2 | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CONFIG_SYS_DBAT4L	CONFIG_SYS_IBAT4L
+#define CONFIG_SYS_DBAT4U	CONFIG_SYS_IBAT4U
 
 /* Stack in dcache: cacheable, no memory coherence */
-#define CFG_IBAT5L	(CFG_INIT_RAM_ADDR | BATL_PP_10)
-#define CFG_IBAT5U	(CFG_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP)
-#define CFG_DBAT5L	CFG_IBAT5L
-#define CFG_DBAT5U	CFG_IBAT5U
+#define CONFIG_SYS_IBAT5L	(CONFIG_SYS_INIT_RAM_ADDR | BATL_PP_10)
+#define CONFIG_SYS_IBAT5U	(CONFIG_SYS_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP)
+#define CONFIG_SYS_DBAT5L	CONFIG_SYS_IBAT5L
+#define CONFIG_SYS_DBAT5U	CONFIG_SYS_IBAT5U
 
 #ifdef CONFIG_PCI
 /* PCI MEM space: cacheable */
-#define CFG_IBAT6L	(CFG_PCI_MEM_PHYS | BATL_PP_10 | BATL_MEMCOHERENCE)
-#define CFG_IBAT6U	(CFG_PCI_MEM_PHYS | BATU_BL_256M | BATU_VS | BATU_VP)
-#define CFG_DBAT6L	CFG_IBAT6L
-#define CFG_DBAT6U	CFG_IBAT6U
+#define CONFIG_SYS_IBAT6L	(CONFIG_SYS_PCI_MEM_PHYS | BATL_PP_10 | BATL_MEMCOHERENCE)
+#define CONFIG_SYS_IBAT6U	(CONFIG_SYS_PCI_MEM_PHYS | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CONFIG_SYS_DBAT6L	CONFIG_SYS_IBAT6L
+#define CONFIG_SYS_DBAT6U	CONFIG_SYS_IBAT6U
 /* PCI MMIO space: cache-inhibit and guarded */
-#define CFG_IBAT7L	(CFG_PCI_MMIO_PHYS | BATL_PP_10 | \
+#define CONFIG_SYS_IBAT7L	(CONFIG_SYS_PCI_MMIO_PHYS | BATL_PP_10 | \
 			BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
-#define CFG_IBAT7U	(CFG_PCI_MMIO_PHYS | BATU_BL_256M | BATU_VS | BATU_VP)
-#define CFG_DBAT7L	CFG_IBAT7L
-#define CFG_DBAT7U	CFG_IBAT7U
+#define CONFIG_SYS_IBAT7U	(CONFIG_SYS_PCI_MMIO_PHYS | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CONFIG_SYS_DBAT7L	CONFIG_SYS_IBAT7L
+#define CONFIG_SYS_DBAT7U	CONFIG_SYS_IBAT7U
 #else
-#define CFG_IBAT6L	(0)
-#define CFG_IBAT6U	(0)
-#define CFG_IBAT7L	(0)
-#define CFG_IBAT7U	(0)
-#define CFG_DBAT6L	CFG_IBAT6L
-#define CFG_DBAT6U	CFG_IBAT6U
-#define CFG_DBAT7L	CFG_IBAT7L
-#define CFG_DBAT7U	CFG_IBAT7U
+#define CONFIG_SYS_IBAT6L	(0)
+#define CONFIG_SYS_IBAT6U	(0)
+#define CONFIG_SYS_IBAT7L	(0)
+#define CONFIG_SYS_IBAT7U	(0)
+#define CONFIG_SYS_DBAT6L	CONFIG_SYS_IBAT6L
+#define CONFIG_SYS_DBAT6U	CONFIG_SYS_IBAT6U
+#define CONFIG_SYS_DBAT7L	CONFIG_SYS_IBAT7L
+#define CONFIG_SYS_DBAT7U	CONFIG_SYS_IBAT7U
 #endif
 
 /*
diff --git a/include/configs/MPC8360ERDK.h b/include/configs/MPC8360ERDK.h
index 6898495b8..a4f2862c4 100644
--- a/include/configs/MPC8360ERDK.h
+++ b/include/configs/MPC8360ERDK.h
@@ -44,14 +44,14 @@
 /*
  * Hardware Reset Configuration Word
  */
-#define CFG_HRCW_LOW (\
+#define CONFIG_SYS_HRCW_LOW (\
 	HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\
 	HRCWL_DDR_TO_SCB_CLK_1X1 |\
 	HRCWL_CSB_TO_CLKIN_MPC8360ERDK |\
 	HRCWL_CORE_TO_CSB_2X1 |\
 	HRCWL_CE_TO_PLL_1X15)
 
-#define CFG_HRCW_HIGH (\
+#define CONFIG_SYS_HRCW_HIGH (\
 	HRCWH_PCI_HOST |\
 	HRCWH_PCI1_ARBITER_ENABLE |\
 	HRCWH_PCICKDRV_ENABLE |\
@@ -67,8 +67,8 @@
 /*
  * System IO Config
  */
-#define CFG_SICRH		0x00000000
-#define CFG_SICRL		0x40000000
+#define CONFIG_SYS_SICRH		0x00000000
+#define CONFIG_SYS_SICRL		0x40000000
 
 #define CONFIG_BOARD_EARLY_INIT_F /* call board_pre_init */
 #define CONFIG_BOARD_EARLY_INIT_R
@@ -76,18 +76,18 @@
 /*
  * IMMR new address
  */
-#define CFG_IMMR		0xE0000000
+#define CONFIG_SYS_IMMR		0xE0000000
 
 /*
  * DDR Setup
  */
-#define CFG_DDR_BASE		0x00000000 /* DDR is system memory */
-#define CFG_SDRAM_BASE		CFG_DDR_BASE
-#define CFG_DDR_SDRAM_BASE	CFG_DDR_BASE
-#define CFG_DDR_SDRAM_CLK_CNTL	(DDR_SDRAM_CLK_CNTL_SS_EN | \
+#define CONFIG_SYS_DDR_BASE		0x00000000 /* DDR is system memory */
+#define CONFIG_SYS_SDRAM_BASE		CONFIG_SYS_DDR_BASE
+#define CONFIG_SYS_DDR_SDRAM_BASE	CONFIG_SYS_DDR_BASE
+#define CONFIG_SYS_DDR_SDRAM_CLK_CNTL	(DDR_SDRAM_CLK_CNTL_SS_EN | \
 				DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05)
 
-#define CFG_83XX_DDR_USES_CS0
+#define CONFIG_SYS_83XX_DDR_USES_CS0
 
 #define CONFIG_DDR_ECC		/* support DDR ECC function */
 #define CONFIG_DDR_ECC_CMD	/* Use DDR ECC user commands */
@@ -95,7 +95,7 @@
 /*
  * DDRCDR - DDR Control Driver Register
  */
-#define CFG_DDRCDR_VALUE	0x80080001
+#define CONFIG_SYS_DDRCDR_VALUE	0x80080001
 
 #undef CONFIG_SPD_EEPROM	/* Do not use SPD EEPROM for DDR setup */
 
@@ -103,19 +103,19 @@
  * Manually set up DDR parameters
  */
 #define CONFIG_DDR_II
-#define CFG_DDR_SIZE		256 /* MB */
-#define CFG_DDR_CS0_BNDS	0x0000000f
-#define CFG_DDR_CS0_CONFIG	(CSCONFIG_EN | CSCONFIG_ROW_BIT_13 | \
+#define CONFIG_SYS_DDR_SIZE		256 /* MB */
+#define CONFIG_SYS_DDR_CS0_BNDS	0x0000000f
+#define CONFIG_SYS_DDR_CS0_CONFIG	(CSCONFIG_EN | CSCONFIG_ROW_BIT_13 | \
 				 CSCONFIG_COL_BIT_10 | CSCONFIG_ODT_WR_ACS)
-#define CFG_DDR_SDRAM_CFG	(SDRAM_CFG_SDRAM_TYPE_DDR2 | SDRAM_CFG_ECC_EN)
-#define CFG_DDR_SDRAM_CFG2	0x00001000
-#define CFG_DDR_CLK_CNTL	(DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05)
-#define CFG_DDR_INTERVAL	((256 << SDRAM_INTERVAL_BSTOPRE_SHIFT) | \
+#define CONFIG_SYS_DDR_SDRAM_CFG	(SDRAM_CFG_SDRAM_TYPE_DDR2 | SDRAM_CFG_ECC_EN)
+#define CONFIG_SYS_DDR_SDRAM_CFG2	0x00001000
+#define CONFIG_SYS_DDR_CLK_CNTL	(DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05)
+#define CONFIG_SYS_DDR_INTERVAL	((256 << SDRAM_INTERVAL_BSTOPRE_SHIFT) | \
 				 (1115 << SDRAM_INTERVAL_REFINT_SHIFT))
-#define CFG_DDR_MODE		0x47800432
-#define CFG_DDR_MODE2		0x8000c000
+#define CONFIG_SYS_DDR_MODE		0x47800432
+#define CONFIG_SYS_DDR_MODE2		0x8000c000
 
-#define CFG_DDR_TIMING_0	((2 << TIMING_CFG0_MRS_CYC_SHIFT) | \
+#define CONFIG_SYS_DDR_TIMING_0	((2 << TIMING_CFG0_MRS_CYC_SHIFT) | \
 				 (9 << TIMING_CFG0_ODT_PD_EXIT_SHIFT) | \
 				 (3 << TIMING_CFG0_PRE_PD_EXIT_SHIFT) | \
 				 (3 << TIMING_CFG0_ACT_PD_EXIT_SHIFT) | \
@@ -124,7 +124,7 @@
 				 (0 << TIMING_CFG0_WRT_SHIFT) | \
 				 (0 << TIMING_CFG0_RWT_SHIFT))
 
-#define CFG_DDR_TIMING_1	((      TIMING_CFG1_CASLAT_30) | \
+#define CONFIG_SYS_DDR_TIMING_1	((      TIMING_CFG1_CASLAT_30) | \
 				 ( 2 << TIMING_CFG1_WRTORD_SHIFT) | \
 				 ( 2 << TIMING_CFG1_ACTTOACT_SHIFT) | \
 				 ( 3 << TIMING_CFG1_WRREC_SHIFT) | \
@@ -133,7 +133,7 @@
 				 ( 8 << TIMING_CFG1_ACTTOPRE_SHIFT) | \
 				 ( 3 << TIMING_CFG1_PRETOACT_SHIFT))
 
-#define CFG_DDR_TIMING_2	((9 << TIMING_CFG2_FOUR_ACT_SHIFT) | \
+#define CONFIG_SYS_DDR_TIMING_2	((9 << TIMING_CFG2_FOUR_ACT_SHIFT) | \
 				 (4 << TIMING_CFG2_CKE_PLS_SHIFT) | \
 				 (2 << TIMING_CFG2_WR_DATA_DELAY_SHIFT) | \
 				 (2 << TIMING_CFG2_RD_TO_PRE_SHIFT) | \
@@ -141,119 +141,119 @@
 				 (0 << TIMING_CFG2_ADD_LAT_SHIFT) | \
 				 (0 << TIMING_CFG2_CPO_SHIFT))
 
-#define CFG_DDR_TIMING_3	0x00000000
+#define CONFIG_SYS_DDR_TIMING_3	0x00000000
 
 /*
  * Memory test
  */
-#undef CFG_DRAM_TEST		/* memory test, takes time */
-#define CFG_MEMTEST_START	0x00000000 /* memtest region */
-#define CFG_MEMTEST_END		0x00100000
+#undef CONFIG_SYS_DRAM_TEST		/* memory test, takes time */
+#define CONFIG_SYS_MEMTEST_START	0x00000000 /* memtest region */
+#define CONFIG_SYS_MEMTEST_END		0x00100000
 
 /*
  * The reserved memory
  */
-#define CFG_MONITOR_BASE	TEXT_BASE /* start of monitor */
-#define CFG_FLASH_BASE		0xFF800000 /* FLASH base address */
+#define CONFIG_SYS_MONITOR_BASE	TEXT_BASE /* start of monitor */
+#define CONFIG_SYS_FLASH_BASE		0xFF800000 /* FLASH base address */
 
-#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
-#define CFG_RAMBOOT
+#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
+#define CONFIG_SYS_RAMBOOT
 #else
-#undef	CFG_RAMBOOT
+#undef	CONFIG_SYS_RAMBOOT
 #endif
 
-#define CFG_MONITOR_LEN		(256 * 1024) /* Reserve 256 kB for Mon */
-#define CFG_MALLOC_LEN		(128 * 1024) /* Reserved for malloc */
+#define CONFIG_SYS_MONITOR_LEN		(256 * 1024) /* Reserve 256 kB for Mon */
+#define CONFIG_SYS_MALLOC_LEN		(128 * 1024) /* Reserved for malloc */
 
 /*
  * Initial RAM Base Address Setup
  */
-#define CFG_INIT_RAM_LOCK	1
-#define CFG_INIT_RAM_ADDR	0xE6000000 /* Initial RAM address */
-#define CFG_INIT_RAM_END	0x1000 /* End of used area in RAM */
-#define CFG_GBL_DATA_SIZE	0x100 /* num bytes initial data */
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_RAM_LOCK	1
+#define CONFIG_SYS_INIT_RAM_ADDR	0xE6000000 /* Initial RAM address */
+#define CONFIG_SYS_INIT_RAM_END	0x1000 /* End of used area in RAM */
+#define CONFIG_SYS_GBL_DATA_SIZE	0x100 /* num bytes initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
 
 /*
  * Local Bus Configuration & Clock Setup
  */
-#define CFG_LCRR		(LCRR_DBYP | LCRR_CLKDIV_4)
-#define CFG_LBC_LBCR		0x00000000
+#define CONFIG_SYS_LCRR		(LCRR_DBYP | LCRR_CLKDIV_4)
+#define CONFIG_SYS_LBC_LBCR		0x00000000
 
 /*
  * FLASH on the Local Bus
  */
-#define CFG_FLASH_CFI		/* use the Common Flash Interface */
+#define CONFIG_SYS_FLASH_CFI		/* use the Common Flash Interface */
 #define CONFIG_FLASH_CFI_DRIVER	/* use the CFI driver */
-#define CFG_FLASH_SIZE		8 /* max FLASH size is 32M */
-#define CFG_FLASH_PROTECTION	1 /* Use intel Flash protection. */
+#define CONFIG_SYS_FLASH_SIZE		8 /* max FLASH size is 32M */
+#define CONFIG_SYS_FLASH_PROTECTION	1 /* Use intel Flash protection. */
 
-#define CFG_LBLAWBAR0_PRELIM	CFG_FLASH_BASE /* Window base at flash base */
-#define CFG_LBLAWAR0_PRELIM	0x80000018 /* 32MB window size */
+#define CONFIG_SYS_LBLAWBAR0_PRELIM	CONFIG_SYS_FLASH_BASE /* Window base at flash base */
+#define CONFIG_SYS_LBLAWAR0_PRELIM	0x80000018 /* 32MB window size */
 
-#define CFG_BR0_PRELIM	(CFG_FLASH_BASE | /* Flash Base address */ \
+#define CONFIG_SYS_BR0_PRELIM	(CONFIG_SYS_FLASH_BASE | /* Flash Base address */ \
 			(2 << BR_PS_SHIFT) | /* 16 bit port size */ \
 			BR_V)	/* valid */
-#define CFG_OR0_PRELIM		((~(CFG_FLASH_SIZE - 1) << 20) | OR_UPM_XAM | \
+#define CONFIG_SYS_OR0_PRELIM		((~(CONFIG_SYS_FLASH_SIZE - 1) << 20) | OR_UPM_XAM | \
 				OR_GPCM_CSNT | OR_GPCM_ACS_DIV2 | \
 				OR_GPCM_XACS | OR_GPCM_SCY_15 | \
 				OR_GPCM_TRLX | OR_GPCM_EHTR | OR_GPCM_EAD)
 
-#define CFG_MAX_FLASH_BANKS	1 /* number of banks */
-#define CFG_MAX_FLASH_SECT	256 /* max sectors per device */
+#define CONFIG_SYS_MAX_FLASH_BANKS	1 /* number of banks */
+#define CONFIG_SYS_MAX_FLASH_SECT	256 /* max sectors per device */
 
-#undef	CFG_FLASH_CHECKSUM
+#undef	CONFIG_SYS_FLASH_CHECKSUM
 
 /*
  * NAND flash on the local bus
  */
-#define CFG_NAND_BASE		0x60000000
+#define CONFIG_SYS_NAND_BASE		0x60000000
 #define CONFIG_CMD_NAND		1
 #define CONFIG_NAND_FSL_UPM	1
-#define CFG_MAX_NAND_DEVICE	1
+#define CONFIG_SYS_MAX_NAND_DEVICE	1
 #define NAND_MAX_CHIPS		1
 #define CONFIG_MTD_NAND_VERIFY_WRITE
 
-#define CFG_LBLAWBAR1_PRELIM	CFG_NAND_BASE
-#define CFG_LBLAWAR1_PRELIM	0x8000001b /* Access window size 4K */
+#define CONFIG_SYS_LBLAWBAR1_PRELIM	CONFIG_SYS_NAND_BASE
+#define CONFIG_SYS_LBLAWAR1_PRELIM	0x8000001b /* Access window size 4K */
 
 /* Port size 8 bit, UPMA */
-#define CFG_BR1_PRELIM		(CFG_NAND_BASE | 0x00000881)
-#define CFG_OR1_PRELIM		0xfc000001
+#define CONFIG_SYS_BR1_PRELIM		(CONFIG_SYS_NAND_BASE | 0x00000881)
+#define CONFIG_SYS_OR1_PRELIM		0xfc000001
 
 /*
  * Fujitsu MB86277 (MINT) graphics controller
  */
-#define CFG_VIDEO_BASE		0x70000000
+#define CONFIG_SYS_VIDEO_BASE		0x70000000
 
-#define CFG_LBLAWBAR2_PRELIM	CFG_VIDEO_BASE
-#define CFG_LBLAWAR2_PRELIM	0x80000019 /* Access window size 64MB */
+#define CONFIG_SYS_LBLAWBAR2_PRELIM	CONFIG_SYS_VIDEO_BASE
+#define CONFIG_SYS_LBLAWAR2_PRELIM	0x80000019 /* Access window size 64MB */
 
 /* Port size 32 bit, UPMB */
-#define CFG_BR2_PRELIM		(CFG_VIDEO_BASE | 0x000018a1) /* PS=11, UPMB */
-#define CFG_OR2_PRELIM		0xfc000001 /* (64MB, EAD=1) */
+#define CONFIG_SYS_BR2_PRELIM		(CONFIG_SYS_VIDEO_BASE | 0x000018a1) /* PS=11, UPMB */
+#define CONFIG_SYS_OR2_PRELIM		0xfc000001 /* (64MB, EAD=1) */
 
 /*
  * Serial Port
  */
 #define CONFIG_CONS_INDEX	1
 #undef	CONFIG_SERIAL_SOFTWARE_FIFO
-#define CFG_NS16550
-#define CFG_NS16550_SERIAL
-#define CFG_NS16550_REG_SIZE	1
-#define CFG_NS16550_CLK		get_bus_freq(0)
+#define CONFIG_SYS_NS16550
+#define CONFIG_SYS_NS16550_SERIAL
+#define CONFIG_SYS_NS16550_REG_SIZE	1
+#define CONFIG_SYS_NS16550_CLK		get_bus_freq(0)
 
-#define CFG_BAUDRATE_TABLE  \
+#define CONFIG_SYS_BAUDRATE_TABLE  \
 	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 115200,}
 
-#define CFG_NS16550_COM1	(CFG_IMMR+0x4500)
-#define CFG_NS16550_COM2	(CFG_IMMR+0x4600)
+#define CONFIG_SYS_NS16550_COM1	(CONFIG_SYS_IMMR+0x4500)
+#define CONFIG_SYS_NS16550_COM2	(CONFIG_SYS_IMMR+0x4600)
 
 #define CONFIG_CMDLINE_EDITING	1	/* add command line history */
 /* Use the HUSH parser */
-#define CFG_HUSH_PARSER
-#ifdef	CFG_HUSH_PARSER
-#define CFG_PROMPT_HUSH_PS2 "> "
+#define CONFIG_SYS_HUSH_PARSER
+#ifdef	CONFIG_SYS_HUSH_PARSER
+#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
 #endif
 
 /* Pass open firmware flat tree */
@@ -267,11 +267,11 @@
 #define CONFIG_FSL_I2C
 #define CONFIG_I2C_MULTI_BUS
 #define CONFIG_I2C_CMD_TREE
-#define CFG_I2C_SPEED	400000	/* I2C speed and slave address */
-#define CFG_I2C_SLAVE	0x7F
-#define CFG_I2C_NOPROBES	{{0x52}} /* Don't probe these addrs */
-#define CFG_I2C_OFFSET	0x3000
-#define CFG_I2C2_OFFSET 0x3100
+#define CONFIG_SYS_I2C_SPEED	400000	/* I2C speed and slave address */
+#define CONFIG_SYS_I2C_SLAVE	0x7F
+#define CONFIG_SYS_I2C_NOPROBES	{{0x52}} /* Don't probe these addrs */
+#define CONFIG_SYS_I2C_OFFSET	0x3000
+#define CONFIG_SYS_I2C2_OFFSET 0x3100
 
 /*
  * General PCI
@@ -280,15 +280,15 @@
 #define CONFIG_PCI
 #define CONFIG_83XX_GENERIC_PCI	1
 
-#define CFG_PCI1_MEM_BASE	0x80000000
-#define CFG_PCI1_MEM_PHYS	CFG_PCI1_MEM_BASE
-#define CFG_PCI1_MEM_SIZE	0x10000000 /* 256M */
-#define CFG_PCI1_MMIO_BASE	0x90000000
-#define CFG_PCI1_MMIO_PHYS	CFG_PCI1_MMIO_BASE
-#define CFG_PCI1_MMIO_SIZE	0x10000000 /* 256M */
-#define CFG_PCI1_IO_BASE	0xE0300000
-#define CFG_PCI1_IO_PHYS	0xE0300000
-#define CFG_PCI1_IO_SIZE	0x100000 /* 1M */
+#define CONFIG_SYS_PCI1_MEM_BASE	0x80000000
+#define CONFIG_SYS_PCI1_MEM_PHYS	CONFIG_SYS_PCI1_MEM_BASE
+#define CONFIG_SYS_PCI1_MEM_SIZE	0x10000000 /* 256M */
+#define CONFIG_SYS_PCI1_MMIO_BASE	0x90000000
+#define CONFIG_SYS_PCI1_MMIO_PHYS	CONFIG_SYS_PCI1_MMIO_BASE
+#define CONFIG_SYS_PCI1_MMIO_SIZE	0x10000000 /* 256M */
+#define CONFIG_SYS_PCI1_IO_BASE	0xE0300000
+#define CONFIG_SYS_PCI1_IO_PHYS	0xE0300000
+#define CONFIG_SYS_PCI1_IO_SIZE	0x100000 /* 1M */
 
 #ifdef CONFIG_PCI
 
@@ -297,7 +297,7 @@
 
 #undef CONFIG_EEPRO100
 #undef CONFIG_PCI_SCAN_SHOW	/* show pci devices on startup */
-#define CFG_PCI_SUBSYS_VENDORID 0x1957	/* Freescale */
+#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x1957	/* Freescale */
 
 #endif	/* CONFIG_PCI */
 
@@ -315,43 +315,43 @@
 #define CONFIG_UEC_ETH1		/* GETH1 */
 
 #ifdef CONFIG_UEC_ETH1
-#define CFG_UEC1_UCC_NUM	0	/* UCC1 */
-#define CFG_UEC1_RX_CLK		QE_CLK_NONE
-#define CFG_UEC1_TX_CLK		QE_CLK9
-#define CFG_UEC1_ETH_TYPE	GIGA_ETH
-#define CFG_UEC1_PHY_ADDR	2
-#define CFG_UEC1_INTERFACE_MODE ENET_1000_RGMII_RXID
+#define CONFIG_SYS_UEC1_UCC_NUM	0	/* UCC1 */
+#define CONFIG_SYS_UEC1_RX_CLK		QE_CLK_NONE
+#define CONFIG_SYS_UEC1_TX_CLK		QE_CLK9
+#define CONFIG_SYS_UEC1_ETH_TYPE	GIGA_ETH
+#define CONFIG_SYS_UEC1_PHY_ADDR	2
+#define CONFIG_SYS_UEC1_INTERFACE_MODE ENET_1000_RGMII_RXID
 #endif
 
 #define CONFIG_UEC_ETH2		/* GETH2 */
 
 #ifdef CONFIG_UEC_ETH2
-#define CFG_UEC2_UCC_NUM	1	/* UCC2 */
-#define CFG_UEC2_RX_CLK		QE_CLK_NONE
-#define CFG_UEC2_TX_CLK		QE_CLK4
-#define CFG_UEC2_ETH_TYPE	GIGA_ETH
-#define CFG_UEC2_PHY_ADDR	4
-#define CFG_UEC2_INTERFACE_MODE ENET_1000_RGMII_RXID
+#define CONFIG_SYS_UEC2_UCC_NUM	1	/* UCC2 */
+#define CONFIG_SYS_UEC2_RX_CLK		QE_CLK_NONE
+#define CONFIG_SYS_UEC2_TX_CLK		QE_CLK4
+#define CONFIG_SYS_UEC2_ETH_TYPE	GIGA_ETH
+#define CONFIG_SYS_UEC2_PHY_ADDR	4
+#define CONFIG_SYS_UEC2_INTERFACE_MODE ENET_1000_RGMII_RXID
 #endif
 
 /*
  * Environment
  */
 
-#ifndef CFG_RAMBOOT
-#define CFG_ENV_IS_IN_FLASH	1
-#define CFG_ENV_ADDR		(CFG_MONITOR_BASE + 0x40000)
-#define CFG_ENV_SECT_SIZE	0x20000 /* 128K(one sector) for env */
-#define CFG_ENV_SIZE		0x20000
-#else /* CFG_RAMBOOT */
-#define CFG_NO_FLASH		1	/* Flash is not usable now */
-#define CFG_ENV_IS_NOWHERE	1	/* Store ENV in memory only */
-#define CFG_ENV_ADDR		(CFG_MONITOR_BASE - 0x1000)
-#define CFG_ENV_SIZE		0x2000
-#endif /* CFG_RAMBOOT */
+#ifndef CONFIG_SYS_RAMBOOT
+#define CONFIG_ENV_IS_IN_FLASH	1
+#define CONFIG_ENV_ADDR		(CONFIG_SYS_MONITOR_BASE + 0x40000)
+#define CONFIG_ENV_SECT_SIZE	0x20000 /* 128K(one sector) for env */
+#define CONFIG_ENV_SIZE		0x20000
+#else /* CONFIG_SYS_RAMBOOT */
+#define CONFIG_SYS_NO_FLASH		1	/* Flash is not usable now */
+#define CONFIG_ENV_IS_NOWHERE	1	/* Store ENV in memory only */
+#define CONFIG_ENV_ADDR		(CONFIG_SYS_MONITOR_BASE - 0x1000)
+#define CONFIG_ENV_SIZE		0x2000
+#endif /* CONFIG_SYS_RAMBOOT */
 
 #define CONFIG_LOADS_ECHO	1	/* echo on for serial download */
-#define CFG_LOADS_BAUD_CHANGE	1	/* allow baudrate change */
+#define CONFIG_SYS_LOADS_BAUD_CHANGE	1	/* allow baudrate change */
 
 /*
  * BOOTP options
@@ -376,7 +376,7 @@
 #define CONFIG_CMD_PCI
 #endif
 
-#if defined(CFG_RAMBOOT)
+#if defined(CONFIG_SYS_RAMBOOT)
 #undef CONFIG_CMD_ENV
 #undef CONFIG_CMD_LOADS
 #endif
@@ -386,34 +386,34 @@
 /*
  * Miscellaneous configurable options
  */
-#define CFG_LONGHELP		/* undef to save memory */
-#define CFG_LOAD_ADDR		0x2000000 /* default load address */
-#define CFG_PROMPT		"=> "	/* Monitor Command Prompt */
+#define CONFIG_SYS_LONGHELP		/* undef to save memory */
+#define CONFIG_SYS_LOAD_ADDR		0x2000000 /* default load address */
+#define CONFIG_SYS_PROMPT		"=> "	/* Monitor Command Prompt */
 
 #if defined(CONFIG_CMD_KGDB)
-	#define CFG_CBSIZE	1024 /* Console I/O Buffer Size */
+	#define CONFIG_SYS_CBSIZE	1024 /* Console I/O Buffer Size */
 #else
-	#define CFG_CBSIZE	256 /* Console I/O Buffer Size */
+	#define CONFIG_SYS_CBSIZE	256 /* Console I/O Buffer Size */
 #endif
 
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define CFG_MAXARGS	16		/* max number of command args */
-#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size */
-#define CFG_HZ		1000		/* decrementer freq: 1ms ticks */
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS	16		/* max number of command args */
+#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size */
+#define CONFIG_SYS_HZ		1000		/* decrementer freq: 1ms ticks */
 
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define CFG_BOOTMAPSZ		(8 << 20) /* Initial Memory map for Linux */
+#define CONFIG_SYS_BOOTMAPSZ		(8 << 20) /* Initial Memory map for Linux */
 
 /*
  * Core HID Setup
  */
-#define CFG_HID0_INIT		0x000000000
-#define CFG_HID0_FINAL		HID0_ENABLE_MACHINE_CHECK
-#define CFG_HID2		HID2_HBE
+#define CONFIG_SYS_HID0_INIT		0x000000000
+#define CONFIG_SYS_HID0_FINAL		HID0_ENABLE_MACHINE_CHECK
+#define CONFIG_SYS_HID2		HID2_HBE
 
 /*
  * MMU Setup
@@ -422,65 +422,65 @@
 #define CONFIG_HIGH_BATS	1	/* High BATs supported */
 
 /* DDR: cache cacheable */
-#define CFG_IBAT0L	(CFG_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
-#define CFG_IBAT0U	(CFG_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
-#define CFG_DBAT0L	CFG_IBAT0L
-#define CFG_DBAT0U	CFG_IBAT0U
+#define CONFIG_SYS_IBAT0L	(CONFIG_SYS_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
+#define CONFIG_SYS_IBAT0U	(CONFIG_SYS_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CONFIG_SYS_DBAT0L	CONFIG_SYS_IBAT0L
+#define CONFIG_SYS_DBAT0U	CONFIG_SYS_IBAT0U
 
 /* IMMRBAR & PCI IO: cache-inhibit and guarded */
-#define CFG_IBAT1L	(CFG_IMMR | BATL_PP_10 | \
+#define CONFIG_SYS_IBAT1L	(CONFIG_SYS_IMMR | BATL_PP_10 | \
 			BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
-#define CFG_IBAT1U	(CFG_IMMR | BATU_BL_4M | BATU_VS | BATU_VP)
-#define CFG_DBAT1L	CFG_IBAT1L
-#define CFG_DBAT1U	CFG_IBAT1U
+#define CONFIG_SYS_IBAT1U	(CONFIG_SYS_IMMR | BATU_BL_4M | BATU_VS | BATU_VP)
+#define CONFIG_SYS_DBAT1L	CONFIG_SYS_IBAT1L
+#define CONFIG_SYS_DBAT1U	CONFIG_SYS_IBAT1U
 
 /* NAND: cache-inhibit and guarded */
-#define CFG_IBAT2L	(CFG_NAND_BASE | BATL_PP_10 | BATL_CACHEINHIBIT |\
+#define CONFIG_SYS_IBAT2L	(CONFIG_SYS_NAND_BASE | BATL_PP_10 | BATL_CACHEINHIBIT |\
 			 BATL_GUARDEDSTORAGE)
-#define CFG_IBAT2U	(CFG_NAND_BASE | BATU_BL_64M | BATU_VS | BATU_VP)
-#define CFG_DBAT2L	CFG_IBAT2L
-#define CFG_DBAT2U	CFG_IBAT2U
+#define CONFIG_SYS_IBAT2U	(CONFIG_SYS_NAND_BASE | BATU_BL_64M | BATU_VS | BATU_VP)
+#define CONFIG_SYS_DBAT2L	CONFIG_SYS_IBAT2L
+#define CONFIG_SYS_DBAT2U	CONFIG_SYS_IBAT2U
 
 /* FLASH: icache cacheable, but dcache-inhibit and guarded */
-#define CFG_IBAT3L	(CFG_FLASH_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
-#define CFG_IBAT3U	(CFG_FLASH_BASE | BATU_BL_32M | BATU_VS | BATU_VP)
-#define CFG_DBAT3L	(CFG_FLASH_BASE | BATL_PP_10 | \
+#define CONFIG_SYS_IBAT3L	(CONFIG_SYS_FLASH_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
+#define CONFIG_SYS_IBAT3U	(CONFIG_SYS_FLASH_BASE | BATU_BL_32M | BATU_VS | BATU_VP)
+#define CONFIG_SYS_DBAT3L	(CONFIG_SYS_FLASH_BASE | BATL_PP_10 | \
 			 BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
-#define CFG_DBAT3U	CFG_IBAT3U
+#define CONFIG_SYS_DBAT3U	CONFIG_SYS_IBAT3U
 
 /* Stack in dcache: cacheable, no memory coherence */
-#define CFG_IBAT4L	(CFG_INIT_RAM_ADDR | BATL_PP_10)
-#define CFG_IBAT4U	(CFG_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP)
-#define CFG_DBAT4L	CFG_IBAT4L
-#define CFG_DBAT4U	CFG_IBAT4U
+#define CONFIG_SYS_IBAT4L	(CONFIG_SYS_INIT_RAM_ADDR | BATL_PP_10)
+#define CONFIG_SYS_IBAT4U	(CONFIG_SYS_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP)
+#define CONFIG_SYS_DBAT4L	CONFIG_SYS_IBAT4L
+#define CONFIG_SYS_DBAT4U	CONFIG_SYS_IBAT4U
 
-#define CFG_IBAT5L	(CFG_VIDEO_BASE | BATL_PP_10 | BATL_CACHEINHIBIT | \
+#define CONFIG_SYS_IBAT5L	(CONFIG_SYS_VIDEO_BASE | BATL_PP_10 | BATL_CACHEINHIBIT | \
 			 BATL_GUARDEDSTORAGE)
-#define CFG_IBAT5U	(CFG_VIDEO_BASE | BATU_BL_64M | BATU_VS | BATU_VP)
-#define CFG_DBAT5L	CFG_IBAT5L
-#define CFG_DBAT5U	CFG_IBAT5U
+#define CONFIG_SYS_IBAT5U	(CONFIG_SYS_VIDEO_BASE | BATU_BL_64M | BATU_VS | BATU_VP)
+#define CONFIG_SYS_DBAT5L	CONFIG_SYS_IBAT5L
+#define CONFIG_SYS_DBAT5U	CONFIG_SYS_IBAT5U
 
 #ifdef CONFIG_PCI
 /* PCI MEM space: cacheable */
-#define CFG_IBAT6L	(CFG_PCI1_MEM_PHYS | BATL_PP_10 | BATL_MEMCOHERENCE)
-#define CFG_IBAT6U	(CFG_PCI1_MEM_PHYS | BATU_BL_256M | BATU_VS | BATU_VP)
-#define CFG_DBAT6L	CFG_IBAT6L
-#define CFG_DBAT6U	CFG_IBAT6U
+#define CONFIG_SYS_IBAT6L	(CONFIG_SYS_PCI1_MEM_PHYS | BATL_PP_10 | BATL_MEMCOHERENCE)
+#define CONFIG_SYS_IBAT6U	(CONFIG_SYS_PCI1_MEM_PHYS | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CONFIG_SYS_DBAT6L	CONFIG_SYS_IBAT6L
+#define CONFIG_SYS_DBAT6U	CONFIG_SYS_IBAT6U
 /* PCI MMIO space: cache-inhibit and guarded */
-#define CFG_IBAT7L	(CFG_PCI1_MMIO_PHYS | BATL_PP_10 | \
+#define CONFIG_SYS_IBAT7L	(CONFIG_SYS_PCI1_MMIO_PHYS | BATL_PP_10 | \
 			 BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
-#define CFG_IBAT7U	(CFG_PCI1_MMIO_PHYS | BATU_BL_256M | BATU_VS | BATU_VP)
-#define CFG_DBAT7L	CFG_IBAT7L
-#define CFG_DBAT7U	CFG_IBAT7U
+#define CONFIG_SYS_IBAT7U	(CONFIG_SYS_PCI1_MMIO_PHYS | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CONFIG_SYS_DBAT7L	CONFIG_SYS_IBAT7L
+#define CONFIG_SYS_DBAT7U	CONFIG_SYS_IBAT7U
 #else /* CONFIG_PCI */
-#define CFG_IBAT6L	(0)
-#define CFG_IBAT6U	(0)
-#define CFG_IBAT7L	(0)
-#define CFG_IBAT7U	(0)
-#define CFG_DBAT6L	CFG_IBAT6L
-#define CFG_DBAT6U	CFG_IBAT6U
-#define CFG_DBAT7L	CFG_IBAT7L
-#define CFG_DBAT7U	CFG_IBAT7U
+#define CONFIG_SYS_IBAT6L	(0)
+#define CONFIG_SYS_IBAT6U	(0)
+#define CONFIG_SYS_IBAT7L	(0)
+#define CONFIG_SYS_IBAT7U	(0)
+#define CONFIG_SYS_DBAT6L	CONFIG_SYS_IBAT6L
+#define CONFIG_SYS_DBAT6U	CONFIG_SYS_IBAT6U
+#define CONFIG_SYS_DBAT7L	CONFIG_SYS_IBAT7L
+#define CONFIG_SYS_DBAT7U	CONFIG_SYS_IBAT7U
 #endif /* CONFIG_PCI */
 
 /*
diff --git a/include/configs/MPC837XEMDS.h b/include/configs/MPC837XEMDS.h
index f9c1b170d..d49155fce 100644
--- a/include/configs/MPC837XEMDS.h
+++ b/include/configs/MPC837XEMDS.h
@@ -47,7 +47,7 @@
  * if CLKIN is 66MHz, then
  * CSB = 396MHz, CORE = 594MHz, DDRC = 396MHz, LBC = 396MHz
  */
-#define CFG_HRCW_LOW (\
+#define CONFIG_SYS_HRCW_LOW (\
 	HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\
 	HRCWL_DDR_TO_SCB_CLK_1X1 |\
 	HRCWL_SVCOD_DIV_2 |\
@@ -55,7 +55,7 @@
 	HRCWL_CORE_TO_CSB_1_5X1)
 
 #ifdef CONFIG_PCISLAVE
-#define CFG_HRCW_HIGH (\
+#define CONFIG_SYS_HRCW_HIGH (\
 	HRCWH_PCI_AGENT |\
 	HRCWH_PCI1_ARBITER_DISABLE |\
 	HRCWH_CORE_ENABLE |\
@@ -69,7 +69,7 @@
 	HRCWH_BIG_ENDIAN |\
 	HRCWH_LDP_CLEAR)
 #else
-#define CFG_HRCW_HIGH (\
+#define CONFIG_SYS_HRCW_HIGH (\
 	HRCWH_PCI_HOST |\
 	HRCWH_PCI1_ARBITER_ENABLE |\
 	HRCWH_CORE_ENABLE |\
@@ -85,29 +85,29 @@
 #endif
 
 /* Arbiter Configuration Register */
-#define CFG_ACR_PIPE_DEP	3	/* Arbiter pipeline depth is 4 */
-#define CFG_ACR_RPTCNT		3	/* Arbiter repeat count is 4 */
+#define CONFIG_SYS_ACR_PIPE_DEP	3	/* Arbiter pipeline depth is 4 */
+#define CONFIG_SYS_ACR_RPTCNT		3	/* Arbiter repeat count is 4 */
 
 /* System Priority Control Register */
-#define CFG_SPCR_TSECEP		3	/* eTSEC1/2 emergency has highest priority */
+#define CONFIG_SYS_SPCR_TSECEP		3	/* eTSEC1/2 emergency has highest priority */
 
 /*
  * IP blocks clock configuration
  */
-#define CFG_SCCR_TSEC1CM	1	/* CSB:eTSEC1 = 1:1 */
-#define CFG_SCCR_TSEC2CM	1	/* CSB:eTSEC2 = 1:1 */
-#define CFG_SCCR_SATACM		SCCR_SATACM_2	/* CSB:SATA[0:3] = 2:1 */
+#define CONFIG_SYS_SCCR_TSEC1CM	1	/* CSB:eTSEC1 = 1:1 */
+#define CONFIG_SYS_SCCR_TSEC2CM	1	/* CSB:eTSEC2 = 1:1 */
+#define CONFIG_SYS_SCCR_SATACM		SCCR_SATACM_2	/* CSB:SATA[0:3] = 2:1 */
 
 /*
  * System IO Config
  */
-#define CFG_SICRH		0x00000000
-#define CFG_SICRL		0x00000000
+#define CONFIG_SYS_SICRH		0x00000000
+#define CONFIG_SYS_SICRL		0x00000000
 
 /*
  * Output Buffer Impedance
  */
-#define CFG_OBIR		0x31100000
+#define CONFIG_SYS_OBIR		0x31100000
 
 #define CONFIG_BOARD_EARLY_INIT_F /* call board_pre_init */
 #define CONFIG_BOARD_EARLY_INIT_R
@@ -115,17 +115,17 @@
 /*
  * IMMR new address
  */
-#define CFG_IMMR		0xE0000000
+#define CONFIG_SYS_IMMR		0xE0000000
 
 /*
  * DDR Setup
  */
-#define CFG_DDR_BASE		0x00000000 /* DDR is system memory */
-#define CFG_SDRAM_BASE		CFG_DDR_BASE
-#define CFG_DDR_SDRAM_BASE	CFG_DDR_BASE
-#define CFG_DDR_SDRAM_CLK_CNTL	DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05
-#define CFG_83XX_DDR_USES_CS0
-#define CFG_DDRCDR_VALUE	0x80080001 /* ODT 150ohm on SoC */
+#define CONFIG_SYS_DDR_BASE		0x00000000 /* DDR is system memory */
+#define CONFIG_SYS_SDRAM_BASE		CONFIG_SYS_DDR_BASE
+#define CONFIG_SYS_DDR_SDRAM_BASE	CONFIG_SYS_DDR_BASE
+#define CONFIG_SYS_DDR_SDRAM_CLK_CNTL	DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05
+#define CONFIG_SYS_83XX_DDR_USES_CS0
+#define CONFIG_SYS_DDRCDR_VALUE	0x80080001 /* ODT 150ohm on SoC */
 
 #undef CONFIG_DDR_ECC		/* support DDR ECC function */
 #undef CONFIG_DDR_ECC_CMD	/* Use DDR ECC user commands */
@@ -141,14 +141,14 @@
  * WHITE ELECTRONIC DESIGNS - W3HG64M72EEU403PD4 SO-DIMM
  * consist of nine chips from SAMSUNG K4T51083QE-ZC(L)D5
  */
-#define CFG_DDR_SIZE		512 /* MB */
-#define CFG_DDR_CS0_BNDS	0x0000001f
-#define CFG_DDR_CS0_CONFIG	( CSCONFIG_EN \
+#define CONFIG_SYS_DDR_SIZE		512 /* MB */
+#define CONFIG_SYS_DDR_CS0_BNDS	0x0000001f
+#define CONFIG_SYS_DDR_CS0_CONFIG	( CSCONFIG_EN \
 				| 0x00010000  /* ODT_WR to CSn */ \
 				| CSCONFIG_ROW_BIT_14 | CSCONFIG_COL_BIT_10 )
 				/* 0x80010202 */
-#define CFG_DDR_TIMING_3	0x00000000
-#define CFG_DDR_TIMING_0	( ( 0 << TIMING_CFG0_RWT_SHIFT ) \
+#define CONFIG_SYS_DDR_TIMING_3	0x00000000
+#define CONFIG_SYS_DDR_TIMING_0	( ( 0 << TIMING_CFG0_RWT_SHIFT ) \
 				| ( 0 << TIMING_CFG0_WRT_SHIFT ) \
 				| ( 0 << TIMING_CFG0_RRT_SHIFT ) \
 				| ( 0 << TIMING_CFG0_WWT_SHIFT ) \
@@ -157,7 +157,7 @@
 				| ( 8 << TIMING_CFG0_ODT_PD_EXIT_SHIFT ) \
 				| ( 2 << TIMING_CFG0_MRS_CYC_SHIFT ) )
 				/* 0x00620802 */
-#define CFG_DDR_TIMING_1	( ( 3 << TIMING_CFG1_PRETOACT_SHIFT ) \
+#define CONFIG_SYS_DDR_TIMING_1	( ( 3 << TIMING_CFG1_PRETOACT_SHIFT ) \
 				| ( 9 << TIMING_CFG1_ACTTOPRE_SHIFT ) \
 				| ( 3 << TIMING_CFG1_ACTTORW_SHIFT ) \
 				| ( 5 << TIMING_CFG1_CASLAT_SHIFT ) \
@@ -166,7 +166,7 @@
 				| ( 2 << TIMING_CFG1_ACTTOACT_SHIFT ) \
 				| ( 2 << TIMING_CFG1_WRTORD_SHIFT ) )
 				/* 0x3935d322 */
-#define CFG_DDR_TIMING_2	( ( 1 << TIMING_CFG2_ADD_LAT_SHIFT ) \
+#define CONFIG_SYS_DDR_TIMING_2	( ( 1 << TIMING_CFG2_ADD_LAT_SHIFT ) \
 				| ( 6 << TIMING_CFG2_CPO_SHIFT ) \
 				| ( 2 << TIMING_CFG2_WR_LAT_DELAY_SHIFT ) \
 				| ( 4 << TIMING_CFG2_RD_TO_PRE_SHIFT ) \
@@ -174,69 +174,70 @@
 				| ( 3 << TIMING_CFG2_CKE_PLS_SHIFT ) \
 				| ( 8 << TIMING_CFG2_FOUR_ACT_SHIFT) )
 				/* 0x131088c8 */
-#define CFG_DDR_INTERVAL	( ( 0x03E0 << SDRAM_INTERVAL_REFINT_SHIFT ) \
+#define CONFIG_SYS_DDR_INTERVAL	( ( 0x03E0 << SDRAM_INTERVAL_REFINT_SHIFT ) \
 				| ( 0x0100 << SDRAM_INTERVAL_BSTOPRE_SHIFT ) )
 				/* 0x03E00100 */
-#define CFG_DDR_SDRAM_CFG	0x43000000
-#define CFG_DDR_SDRAM_CFG2	0x00001000 /* 1 posted refresh */
-#define CFG_DDR_MODE		( ( 0x0448 << SDRAM_MODE_ESD_SHIFT ) \
+#define CONFIG_SYS_DDR_SDRAM_CFG	0x43000000
+#define CONFIG_SYS_DDR_SDRAM_CFG2	0x00001000 /* 1 posted refresh */
+#define CONFIG_SYS_DDR_MODE		( ( 0x0448 << SDRAM_MODE_ESD_SHIFT ) \
 				| ( 0x1432 << SDRAM_MODE_SD_SHIFT ) )
 				/* ODT 150ohm CL=3, AL=1 on SDRAM */
-#define CFG_DDR_MODE2		0x00000000
+#define CONFIG_SYS_DDR_MODE2		0x00000000
 #endif
 
 /*
  * Memory test
  */
-#undef CFG_DRAM_TEST		/* memory test, takes time */
-#define CFG_MEMTEST_START	0x00040000 /* memtest region */
-#define CFG_MEMTEST_END		0x00140000
+#undef CONFIG_SYS_DRAM_TEST		/* memory test, takes time */
+#define CONFIG_SYS_MEMTEST_START	0x00040000 /* memtest region */
+#define CONFIG_SYS_MEMTEST_END		0x00140000
 
 /*
  * The reserved memory
  */
-#define CFG_MONITOR_BASE	TEXT_BASE /* start of monitor */
+#define CONFIG_SYS_MONITOR_BASE	TEXT_BASE /* start of monitor */
 
-#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
-#define CFG_RAMBOOT
+#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
+#define CONFIG_SYS_RAMBOOT
 #else
-#undef CFG_RAMBOOT
+#undef CONFIG_SYS_RAMBOOT
 #endif
 
-/* CFG_MONITOR_LEN must be a multiple of CFG_ENV_SECT_SIZE */
-#define CFG_MONITOR_LEN		(256 * 1024) /* Reserve 256 kB for Mon */
-#define CFG_MALLOC_LEN		(512 * 1024) /* Reserved for malloc */
+/* CONFIG_SYS_MONITOR_LEN must be a multiple of CONFIG_ENV_SECT_SIZE */
+#define CONFIG_SYS_MONITOR_LEN		(384 * 1024) /* Reserve 384 kB for Mon */
+#define CONFIG_SYS_MALLOC_LEN		(512 * 1024) /* Reserved for malloc */
 
 /*
  * Initial RAM Base Address Setup
  */
-#define CFG_INIT_RAM_LOCK	1
-#define CFG_INIT_RAM_ADDR	0xE6000000 /* Initial RAM address */
-#define CFG_INIT_RAM_END	0x1000 /* End of used area in RAM */
-#define CFG_GBL_DATA_SIZE	0x100 /* num bytes initial data */
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_RAM_LOCK	1
+#define CONFIG_SYS_INIT_RAM_ADDR	0xE6000000 /* Initial RAM address */
+#define CONFIG_SYS_INIT_RAM_END	0x1000 /* End of used area in RAM */
+#define CONFIG_SYS_GBL_DATA_SIZE	0x100 /* num bytes initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
 
 /*
  * Local Bus Configuration & Clock Setup
  */
-#define CFG_LCRR		(LCRR_DBYP | LCRR_CLKDIV_8)
-#define CFG_LBC_LBCR		0x00000000
+#define CONFIG_SYS_LCRR		(LCRR_DBYP | LCRR_CLKDIV_8)
+#define CONFIG_SYS_LBC_LBCR		0x00000000
 
 /*
  * FLASH on the Local Bus
  */
-#define CFG_FLASH_CFI		/* use the Common Flash Interface */
+#define CONFIG_SYS_FLASH_CFI		/* use the Common Flash Interface */
 #define CONFIG_FLASH_CFI_DRIVER	/* use the CFI driver */
-#define CFG_FLASH_BASE		0xFE000000 /* FLASH base address */
-#define CFG_FLASH_SIZE		32 /* max FLASH size is 32M */
+#define CONFIG_SYS_FLASH_BASE		0xFE000000 /* FLASH base address */
+#define CONFIG_SYS_FLASH_SIZE		32 /* max FLASH size is 32M */
+#define CONFIG_SYS_FLASH_PROTECTION	1		/* Use h/w Flash protection. */
 
-#define CFG_LBLAWBAR0_PRELIM	CFG_FLASH_BASE /* Window base at flash base */
-#define CFG_LBLAWAR0_PRELIM	0x80000018 /* 32MB window size */
+#define CONFIG_SYS_LBLAWBAR0_PRELIM	CONFIG_SYS_FLASH_BASE /* Window base at flash base */
+#define CONFIG_SYS_LBLAWAR0_PRELIM	0x80000018 /* 32MB window size */
 
-#define CFG_BR0_PRELIM		( CFG_FLASH_BASE	/* Flash Base address */ \
+#define CONFIG_SYS_BR0_PRELIM		( CONFIG_SYS_FLASH_BASE	/* Flash Base address */ \
 				| (2 << BR_PS_SHIFT)	/* 16 bit port size */ \
 				| BR_V )		/* valid */
-#define CFG_OR0_PRELIM		( (~(CFG_FLASH_SIZE - 1) << 20) \
+#define CONFIG_SYS_OR0_PRELIM		( (~(CONFIG_SYS_FLASH_SIZE - 1) << 20) \
 				| OR_UPM_XAM \
 				| OR_GPCM_CSNT \
 				| OR_GPCM_ACS_DIV2 \
@@ -247,64 +248,71 @@
 				| OR_GPCM_EAD )
 				/* 0xFE000FF7 */
 
-#define CFG_MAX_FLASH_BANKS	1 /* number of banks */
-#define CFG_MAX_FLASH_SECT	256 /* max sectors per device */
+#define CONFIG_SYS_MAX_FLASH_BANKS	1 /* number of banks */
+#define CONFIG_SYS_MAX_FLASH_SECT	256 /* max sectors per device */
 
-#undef CFG_FLASH_CHECKSUM
-#define CFG_FLASH_ERASE_TOUT	60000 /* Flash Erase Timeout (ms) */
-#define CFG_FLASH_WRITE_TOUT	500 /* Flash Write Timeout (ms) */
+#undef CONFIG_SYS_FLASH_CHECKSUM
+#define CONFIG_SYS_FLASH_ERASE_TOUT	60000 /* Flash Erase Timeout (ms) */
+#define CONFIG_SYS_FLASH_WRITE_TOUT	500 /* Flash Write Timeout (ms) */
 
 /*
  * BCSR on the Local Bus
  */
-#define CFG_BCSR		0xF8000000
-#define CFG_LBLAWBAR1_PRELIM	CFG_BCSR /* Access window base at BCSR base */
-#define CFG_LBLAWAR1_PRELIM	0x8000000E /* Access window size 32K */
+#define CONFIG_SYS_BCSR		0xF8000000
+#define CONFIG_SYS_LBLAWBAR1_PRELIM	CONFIG_SYS_BCSR /* Access window base at BCSR base */
+#define CONFIG_SYS_LBLAWAR1_PRELIM	0x8000000E /* Access window size 32K */
 
-#define CFG_BR1_PRELIM		(CFG_BCSR | 0x00000801) /* Port size=8bit, MSEL=GPCM */
-#define CFG_OR1_PRELIM		0xFFFFE9f7 /* length 32K */
+#define CONFIG_SYS_BR1_PRELIM		(CONFIG_SYS_BCSR | 0x00000801) /* Port size=8bit, MSEL=GPCM */
+#define CONFIG_SYS_OR1_PRELIM		0xFFFFE9f7 /* length 32K */
 
 /*
  * NAND Flash on the Local Bus
  */
-#define CFG_NAND_BASE		0xE0600000	/* 0xE0600000 */
-#define CFG_BR3_PRELIM		( CFG_NAND_BASE \
+#define CONFIG_CMD_NAND		1
+#define CONFIG_MTD_NAND_VERIFY_WRITE	1
+#define CONFIG_SYS_MAX_NAND_DEVICE	1
+#define NAND_MAX_CHIPS		1
+#define CONFIG_NAND_FSL_ELBC 	1
+
+#define CONFIG_SYS_NAND_BASE		0xE0600000	/* 0xE0600000 */
+#define CONFIG_SYS_BR3_PRELIM		( CONFIG_SYS_NAND_BASE \
 				| (2<<BR_DECC_SHIFT)	/* Use HW ECC */ \
 				| BR_PS_8		/* Port Size = 8 bit */ \
 				| BR_MS_FCM		/* MSEL = FCM */ \
 				| BR_V )		/* valid */
-#define CFG_OR3_PRELIM		( 0xFFFF8000		/* length 32K */ \
-				| OR_FCM_CSCT \
+#define CONFIG_SYS_OR3_PRELIM		( 0xFFFF8000		/* length 32K */ \
+				| OR_FCM_BCTLD \
 				| OR_FCM_CST \
 				| OR_FCM_CHT \
 				| OR_FCM_SCY_1 \
+				| OR_FCM_RST \
 				| OR_FCM_TRLX \
 				| OR_FCM_EHTR )
-				/* 0xFFFF8396 */
+				/* 0xFFFF919E */
 
-#define CFG_LBLAWBAR3_PRELIM	CFG_NAND_BASE
-#define CFG_LBLAWAR3_PRELIM	0x8000000E	/* 32KB  */
+#define CONFIG_SYS_LBLAWBAR3_PRELIM	CONFIG_SYS_NAND_BASE
+#define CONFIG_SYS_LBLAWAR3_PRELIM	0x8000000E	/* 32KB  */
 
 /*
  * Serial Port
  */
 #define CONFIG_CONS_INDEX	1
 #undef CONFIG_SERIAL_SOFTWARE_FIFO
-#define CFG_NS16550
-#define CFG_NS16550_SERIAL
-#define CFG_NS16550_REG_SIZE	1
-#define CFG_NS16550_CLK		get_bus_freq(0)
+#define CONFIG_SYS_NS16550
+#define CONFIG_SYS_NS16550_SERIAL
+#define CONFIG_SYS_NS16550_REG_SIZE	1
+#define CONFIG_SYS_NS16550_CLK		get_bus_freq(0)
 
-#define CFG_BAUDRATE_TABLE  \
+#define CONFIG_SYS_BAUDRATE_TABLE  \
 	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
 
-#define CFG_NS16550_COM1	(CFG_IMMR+0x4500)
-#define CFG_NS16550_COM2	(CFG_IMMR+0x4600)
+#define CONFIG_SYS_NS16550_COM1	(CONFIG_SYS_IMMR+0x4500)
+#define CONFIG_SYS_NS16550_COM2	(CONFIG_SYS_IMMR+0x4600)
 
 /* Use the HUSH parser */
-#define CFG_HUSH_PARSER
-#ifdef CFG_HUSH_PARSER
-#define CFG_PROMPT_HUSH_PS2 "> "
+#define CONFIG_SYS_HUSH_PARSER
+#ifdef CONFIG_SYS_HUSH_PARSER
+#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
 #endif
 
 /* Pass open firmware flat tree */
@@ -316,46 +324,51 @@
 #define CONFIG_HARD_I2C		/* I2C with hardware support */
 #undef CONFIG_SOFT_I2C		/* I2C bit-banged */
 #define CONFIG_FSL_I2C
-#define CFG_I2C_SPEED		400000 /* I2C speed and slave address */
-#define CFG_I2C_SLAVE		0x7F
-#define CFG_I2C_NOPROBES	{0x51} /* Don't probe these addrs */
-#define CFG_I2C_OFFSET		0x3000
-#define CFG_I2C2_OFFSET		0x3100
+#define CONFIG_SYS_I2C_SPEED		400000 /* I2C speed and slave address */
+#define CONFIG_SYS_I2C_SLAVE		0x7F
+#define CONFIG_SYS_I2C_NOPROBES	{0x51} /* Don't probe these addrs */
+#define CONFIG_SYS_I2C_OFFSET		0x3000
+#define CONFIG_SYS_I2C2_OFFSET		0x3100
 
 /*
  * Config on-board RTC
  */
 #define CONFIG_RTC_DS1374	/* use ds1374 rtc via i2c */
-#define CFG_I2C_RTC_ADDR	0x68 /* at address 0x68 */
+#define CONFIG_SYS_I2C_RTC_ADDR	0x68 /* at address 0x68 */
 
 /*
  * General PCI
  * Addresses are mapped 1-1.
  */
-#define CFG_PCI_MEM_BASE	0x80000000
-#define CFG_PCI_MEM_PHYS	CFG_PCI_MEM_BASE
-#define CFG_PCI_MEM_SIZE	0x10000000 /* 256M */
-#define CFG_PCI_MMIO_BASE	0x90000000
-#define CFG_PCI_MMIO_PHYS	CFG_PCI_MMIO_BASE
-#define CFG_PCI_MMIO_SIZE	0x10000000 /* 256M */
-#define CFG_PCI_IO_BASE		0x00000000
-#define CFG_PCI_IO_PHYS		0xE0300000
-#define CFG_PCI_IO_SIZE		0x100000 /* 1M */
+#define CONFIG_SYS_PCI_MEM_BASE	0x80000000
+#define CONFIG_SYS_PCI_MEM_PHYS	CONFIG_SYS_PCI_MEM_BASE
+#define CONFIG_SYS_PCI_MEM_SIZE	0x10000000 /* 256M */
+#define CONFIG_SYS_PCI_MMIO_BASE	0x90000000
+#define CONFIG_SYS_PCI_MMIO_PHYS	CONFIG_SYS_PCI_MMIO_BASE
+#define CONFIG_SYS_PCI_MMIO_SIZE	0x10000000 /* 256M */
+#define CONFIG_SYS_PCI_IO_BASE		0x00000000
+#define CONFIG_SYS_PCI_IO_PHYS		0xE0300000
+#define CONFIG_SYS_PCI_IO_SIZE		0x100000 /* 1M */
 
-#define CFG_PCI_SLV_MEM_LOCAL	CFG_SDRAM_BASE
-#define CFG_PCI_SLV_MEM_BUS	0x00000000
-#define CFG_PCI_SLV_MEM_SIZE	0x80000000
+#define CONFIG_SYS_PCI_SLV_MEM_LOCAL	CONFIG_SYS_SDRAM_BASE
+#define CONFIG_SYS_PCI_SLV_MEM_BUS	0x00000000
+#define CONFIG_SYS_PCI_SLV_MEM_SIZE	0x80000000
 
 #ifdef CONFIG_PCI
+#ifndef __ASSEMBLY__
+extern int board_pci_host_broken(void);
+#endif
 #define CONFIG_83XX_GENERIC_PCI	1 /* Use generic PCI setup */
 #define CONFIG_PQ_MDS_PIB	1 /* PQ MDS Platform IO Board */
 
+#define CONFIG_HAS_FSL_DR_USB	1 /* fixup device tree for the DR USB */
+
 #define CONFIG_NET_MULTI
 #define CONFIG_PCI_PNP		/* do pci plug-and-play */
 
 #undef CONFIG_EEPRO100
 #undef CONFIG_PCI_SCAN_SHOW	/* show pci devices on startup */
-#define CFG_PCI_SUBSYS_VENDORID 0x1957	/* Freescale */
+#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x1957	/* Freescale */
 #endif /* CONFIG_PCI */
 
 #ifndef CONFIG_NET_MULTI
@@ -366,10 +379,10 @@
  * TSEC
  */
 #define CONFIG_TSEC_ENET	/* TSEC ethernet support */
-#define CFG_TSEC1_OFFSET	0x24000
-#define CFG_TSEC1		(CFG_IMMR+CFG_TSEC1_OFFSET)
-#define CFG_TSEC2_OFFSET	0x25000
-#define CFG_TSEC2		(CFG_IMMR+CFG_TSEC2_OFFSET)
+#define CONFIG_SYS_TSEC1_OFFSET	0x24000
+#define CONFIG_SYS_TSEC1		(CONFIG_SYS_IMMR+CONFIG_SYS_TSEC1_OFFSET)
+#define CONFIG_SYS_TSEC2_OFFSET	0x25000
+#define CONFIG_SYS_TSEC2		(CONFIG_SYS_IMMR+CONFIG_SYS_TSEC2_OFFSET)
 
 /*
  * TSEC ethernet configuration
@@ -381,6 +394,8 @@
 #define CONFIG_TSEC2_NAME	"eTSEC1"
 #define TSEC1_PHY_ADDR		2
 #define TSEC2_PHY_ADDR		3
+#define TSEC1_PHY_ADDR_SGMII	8
+#define TSEC2_PHY_ADDR_SGMII	4
 #define TSEC1_PHYIDX		0
 #define TSEC2_PHYIDX		0
 #define TSEC1_FLAGS		(TSEC_GIGABIT | TSEC_REDUCED)
@@ -400,15 +415,15 @@
 #define CONFIG_LIBATA
 #define CONFIG_FSL_SATA
 
-#define CFG_SATA_MAX_DEVICE	2
+#define CONFIG_SYS_SATA_MAX_DEVICE	2
 #define CONFIG_SATA1
-#define CFG_SATA1_OFFSET	0x18000
-#define CFG_SATA1		(CFG_IMMR + CFG_SATA1_OFFSET)
-#define CFG_SATA1_FLAGS		FLAGS_DMA
+#define CONFIG_SYS_SATA1_OFFSET	0x18000
+#define CONFIG_SYS_SATA1		(CONFIG_SYS_IMMR + CONFIG_SYS_SATA1_OFFSET)
+#define CONFIG_SYS_SATA1_FLAGS		FLAGS_DMA
 #define CONFIG_SATA2
-#define CFG_SATA2_OFFSET	0x19000
-#define CFG_SATA2		(CFG_IMMR + CFG_SATA2_OFFSET)
-#define CFG_SATA2_FLAGS		FLAGS_DMA
+#define CONFIG_SYS_SATA2_OFFSET	0x19000
+#define CONFIG_SYS_SATA2		(CONFIG_SYS_IMMR + CONFIG_SYS_SATA2_OFFSET)
+#define CONFIG_SYS_SATA2_FLAGS		FLAGS_DMA
 
 #ifdef CONFIG_FSL_SATA
 #define CONFIG_LBA48
@@ -420,20 +435,20 @@
 /*
  * Environment
  */
-#ifndef CFG_RAMBOOT
-	#define CFG_ENV_IS_IN_FLASH	1
-	#define CFG_ENV_ADDR		(CFG_MONITOR_BASE + CFG_MONITOR_LEN)
-	#define CFG_ENV_SECT_SIZE	0x20000 /* 128K(one sector) for env */
-	#define CFG_ENV_SIZE		0x2000
+#ifndef CONFIG_SYS_RAMBOOT
+	#define CONFIG_ENV_IS_IN_FLASH	1
+	#define CONFIG_ENV_ADDR		(CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)
+	#define CONFIG_ENV_SECT_SIZE	0x20000 /* 128K(one sector) for env */
+	#define CONFIG_ENV_SIZE		0x2000
 #else
-	#define CFG_NO_FLASH		1	/* Flash is not usable now */
-	#define CFG_ENV_IS_NOWHERE	1	/* Store ENV in memory only */
-	#define CFG_ENV_ADDR		(CFG_MONITOR_BASE - 0x1000)
-	#define CFG_ENV_SIZE		0x2000
+	#define CONFIG_SYS_NO_FLASH		1	/* Flash is not usable now */
+	#define CONFIG_ENV_IS_NOWHERE	1	/* Store ENV in memory only */
+	#define CONFIG_ENV_ADDR		(CONFIG_SYS_MONITOR_BASE - 0x1000)
+	#define CONFIG_ENV_SIZE		0x2000
 #endif
 
 #define CONFIG_LOADS_ECHO	1	/* echo on for serial download */
-#define CFG_LOADS_BAUD_CHANGE	1	/* allow baudrate change */
+#define CONFIG_SYS_LOADS_BAUD_CHANGE	1	/* allow baudrate change */
 
 /*
  * BOOTP options
@@ -458,7 +473,7 @@
     #define CONFIG_CMD_PCI
 #endif
 
-#if defined(CFG_RAMBOOT)
+#if defined(CONFIG_SYS_RAMBOOT)
     #undef CONFIG_CMD_ENV
     #undef CONFIG_CMD_LOADS
 #endif
@@ -470,34 +485,34 @@
 /*
  * Miscellaneous configurable options
  */
-#define CFG_LONGHELP		/* undef to save memory */
-#define CFG_LOAD_ADDR		0x2000000 /* default load address */
-#define CFG_PROMPT		"=> "	/* Monitor Command Prompt */
+#define CONFIG_SYS_LONGHELP		/* undef to save memory */
+#define CONFIG_SYS_LOAD_ADDR		0x2000000 /* default load address */
+#define CONFIG_SYS_PROMPT		"=> "	/* Monitor Command Prompt */
 
 #if defined(CONFIG_CMD_KGDB)
-	#define CFG_CBSIZE	1024 /* Console I/O Buffer Size */
+	#define CONFIG_SYS_CBSIZE	1024 /* Console I/O Buffer Size */
 #else
-	#define CFG_CBSIZE	256 /* Console I/O Buffer Size */
+	#define CONFIG_SYS_CBSIZE	256 /* Console I/O Buffer Size */
 #endif
 
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define CFG_MAXARGS	16		/* max number of command args */
-#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size */
-#define CFG_HZ		1000		/* decrementer freq: 1ms ticks */
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS	16		/* max number of command args */
+#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size */
+#define CONFIG_SYS_HZ		1000		/* decrementer freq: 1ms ticks */
 
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define CFG_BOOTMAPSZ		(8 << 20) /* Initial Memory map for Linux */
+#define CONFIG_SYS_BOOTMAPSZ		(8 << 20) /* Initial Memory map for Linux */
 
 /*
  * Core HID Setup
  */
-#define CFG_HID0_INIT		0x000000000
-#define CFG_HID0_FINAL		HID0_ENABLE_MACHINE_CHECK
-#define CFG_HID2		HID2_HBE
+#define CONFIG_SYS_HID0_INIT		0x000000000
+#define CONFIG_SYS_HID0_FINAL		HID0_ENABLE_MACHINE_CHECK
+#define CONFIG_SYS_HID2		HID2_HBE
 
 /*
  * MMU Setup
@@ -505,67 +520,67 @@
 #define CONFIG_HIGH_BATS	1	/* High BATs supported */
 
 /* DDR: cache cacheable */
-#define CFG_SDRAM_LOWER		CFG_SDRAM_BASE
-#define CFG_SDRAM_UPPER		(CFG_SDRAM_BASE + 0x10000000)
+#define CONFIG_SYS_SDRAM_LOWER		CONFIG_SYS_SDRAM_BASE
+#define CONFIG_SYS_SDRAM_UPPER		(CONFIG_SYS_SDRAM_BASE + 0x10000000)
 
-#define CFG_IBAT0L	(CFG_SDRAM_LOWER | BATL_PP_10 | BATL_MEMCOHERENCE)
-#define CFG_IBAT0U	(CFG_SDRAM_LOWER | BATU_BL_256M | BATU_VS | BATU_VP)
-#define CFG_DBAT0L	CFG_IBAT0L
-#define CFG_DBAT0U	CFG_IBAT0U
+#define CONFIG_SYS_IBAT0L	(CONFIG_SYS_SDRAM_LOWER | BATL_PP_10 | BATL_MEMCOHERENCE)
+#define CONFIG_SYS_IBAT0U	(CONFIG_SYS_SDRAM_LOWER | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CONFIG_SYS_DBAT0L	CONFIG_SYS_IBAT0L
+#define CONFIG_SYS_DBAT0U	CONFIG_SYS_IBAT0U
 
-#define CFG_IBAT1L	(CFG_SDRAM_UPPER | BATL_PP_10 | BATL_MEMCOHERENCE)
-#define CFG_IBAT1U	(CFG_SDRAM_UPPER | BATU_BL_256M | BATU_VS | BATU_VP)
-#define CFG_DBAT1L	CFG_IBAT1L
-#define CFG_DBAT1U	CFG_IBAT1U
+#define CONFIG_SYS_IBAT1L	(CONFIG_SYS_SDRAM_UPPER | BATL_PP_10 | BATL_MEMCOHERENCE)
+#define CONFIG_SYS_IBAT1U	(CONFIG_SYS_SDRAM_UPPER | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CONFIG_SYS_DBAT1L	CONFIG_SYS_IBAT1L
+#define CONFIG_SYS_DBAT1U	CONFIG_SYS_IBAT1U
 
 /* IMMRBAR, PCI IO and NAND: cache-inhibit and guarded */
-#define CFG_IBAT2L	(CFG_IMMR | BATL_PP_10 | \
+#define CONFIG_SYS_IBAT2L	(CONFIG_SYS_IMMR | BATL_PP_10 | \
 			BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
-#define CFG_IBAT2U	(CFG_IMMR | BATU_BL_8M | BATU_VS | BATU_VP)
-#define CFG_DBAT2L	CFG_IBAT2L
-#define CFG_DBAT2U	CFG_IBAT2U
+#define CONFIG_SYS_IBAT2U	(CONFIG_SYS_IMMR | BATU_BL_8M | BATU_VS | BATU_VP)
+#define CONFIG_SYS_DBAT2L	CONFIG_SYS_IBAT2L
+#define CONFIG_SYS_DBAT2U	CONFIG_SYS_IBAT2U
 
 /* BCSR: cache-inhibit and guarded */
-#define CFG_IBAT3L	(CFG_BCSR | BATL_PP_10 | \
+#define CONFIG_SYS_IBAT3L	(CONFIG_SYS_BCSR | BATL_PP_10 | \
 			BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
-#define CFG_IBAT3U	(CFG_BCSR | BATU_BL_128K | BATU_VS | BATU_VP)
-#define CFG_DBAT3L	CFG_IBAT3L
-#define CFG_DBAT3U	CFG_IBAT3U
+#define CONFIG_SYS_IBAT3U	(CONFIG_SYS_BCSR | BATU_BL_128K | BATU_VS | BATU_VP)
+#define CONFIG_SYS_DBAT3L	CONFIG_SYS_IBAT3L
+#define CONFIG_SYS_DBAT3U	CONFIG_SYS_IBAT3U
 
 /* FLASH: icache cacheable, but dcache-inhibit and guarded */
-#define CFG_IBAT4L	(CFG_FLASH_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
-#define CFG_IBAT4U	(CFG_FLASH_BASE | BATU_BL_32M | BATU_VS | BATU_VP)
-#define CFG_DBAT4L	(CFG_FLASH_BASE | BATL_PP_10 | \
+#define CONFIG_SYS_IBAT4L	(CONFIG_SYS_FLASH_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
+#define CONFIG_SYS_IBAT4U	(CONFIG_SYS_FLASH_BASE | BATU_BL_32M | BATU_VS | BATU_VP)
+#define CONFIG_SYS_DBAT4L	(CONFIG_SYS_FLASH_BASE | BATL_PP_10 | \
 			BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
-#define CFG_DBAT4U	CFG_IBAT4U
+#define CONFIG_SYS_DBAT4U	CONFIG_SYS_IBAT4U
 
 /* Stack in dcache: cacheable, no memory coherence */
-#define CFG_IBAT5L	(CFG_INIT_RAM_ADDR | BATL_PP_10)
-#define CFG_IBAT5U	(CFG_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP)
-#define CFG_DBAT5L	CFG_IBAT5L
-#define CFG_DBAT5U	CFG_IBAT5U
+#define CONFIG_SYS_IBAT5L	(CONFIG_SYS_INIT_RAM_ADDR | BATL_PP_10)
+#define CONFIG_SYS_IBAT5U	(CONFIG_SYS_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP)
+#define CONFIG_SYS_DBAT5L	CONFIG_SYS_IBAT5L
+#define CONFIG_SYS_DBAT5U	CONFIG_SYS_IBAT5U
 
 #ifdef CONFIG_PCI
 /* PCI MEM space: cacheable */
-#define CFG_IBAT6L	(CFG_PCI_MEM_PHYS | BATL_PP_10 | BATL_MEMCOHERENCE)
-#define CFG_IBAT6U	(CFG_PCI_MEM_PHYS | BATU_BL_256M | BATU_VS | BATU_VP)
-#define CFG_DBAT6L	CFG_IBAT6L
-#define CFG_DBAT6U	CFG_IBAT6U
+#define CONFIG_SYS_IBAT6L	(CONFIG_SYS_PCI_MEM_PHYS | BATL_PP_10 | BATL_MEMCOHERENCE)
+#define CONFIG_SYS_IBAT6U	(CONFIG_SYS_PCI_MEM_PHYS | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CONFIG_SYS_DBAT6L	CONFIG_SYS_IBAT6L
+#define CONFIG_SYS_DBAT6U	CONFIG_SYS_IBAT6U
 /* PCI MMIO space: cache-inhibit and guarded */
-#define CFG_IBAT7L	(CFG_PCI_MMIO_PHYS | BATL_PP_10 | \
+#define CONFIG_SYS_IBAT7L	(CONFIG_SYS_PCI_MMIO_PHYS | BATL_PP_10 | \
 			BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
-#define CFG_IBAT7U	(CFG_PCI_MMIO_PHYS | BATU_BL_256M | BATU_VS | BATU_VP)
-#define CFG_DBAT7L	CFG_IBAT7L
-#define CFG_DBAT7U	CFG_IBAT7U
+#define CONFIG_SYS_IBAT7U	(CONFIG_SYS_PCI_MMIO_PHYS | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CONFIG_SYS_DBAT7L	CONFIG_SYS_IBAT7L
+#define CONFIG_SYS_DBAT7U	CONFIG_SYS_IBAT7U
 #else
-#define CFG_IBAT6L	(0)
-#define CFG_IBAT6U	(0)
-#define CFG_IBAT7L	(0)
-#define CFG_IBAT7U	(0)
-#define CFG_DBAT6L	CFG_IBAT6L
-#define CFG_DBAT6U	CFG_IBAT6U
-#define CFG_DBAT7L	CFG_IBAT7L
-#define CFG_DBAT7U	CFG_IBAT7U
+#define CONFIG_SYS_IBAT6L	(0)
+#define CONFIG_SYS_IBAT6U	(0)
+#define CONFIG_SYS_IBAT7L	(0)
+#define CONFIG_SYS_IBAT7U	(0)
+#define CONFIG_SYS_DBAT6L	CONFIG_SYS_IBAT6L
+#define CONFIG_SYS_DBAT6U	CONFIG_SYS_IBAT6U
+#define CONFIG_SYS_DBAT7L	CONFIG_SYS_IBAT7L
+#define CONFIG_SYS_DBAT7U	CONFIG_SYS_IBAT7U
 #endif
 
 /*
diff --git a/include/configs/MPC837XERDB.h b/include/configs/MPC837XERDB.h
index 82b33530d..f281c59d3 100644
--- a/include/configs/MPC837XERDB.h
+++ b/include/configs/MPC837XERDB.h
@@ -58,7 +58,7 @@
 /*
  * Hardware Reset Configuration Word
  */
-#define CFG_HRCW_LOW (\
+#define CONFIG_SYS_HRCW_LOW (\
 	HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\
 	HRCWL_DDR_TO_SCB_CLK_1X1 |\
 	HRCWL_SVCOD_DIV_2 |\
@@ -66,7 +66,7 @@
 	HRCWL_CORE_TO_CSB_2X1)
 
 #ifdef CONFIG_PCISLAVE
-#define CFG_HRCW_HIGH (\
+#define CONFIG_SYS_HRCW_HIGH (\
 	HRCWH_PCI_AGENT |\
 	HRCWH_PCI1_ARBITER_DISABLE |\
 	HRCWH_CORE_ENABLE |\
@@ -80,7 +80,7 @@
 	HRCWH_BIG_ENDIAN |\
 	HRCWH_LDP_CLEAR)
 #else
-#define CFG_HRCW_HIGH (\
+#define CONFIG_SYS_HRCW_HIGH (\
 	HRCWH_PCI_HOST |\
 	HRCWH_PCI1_ARBITER_ENABLE |\
 	HRCWH_CORE_ENABLE |\
@@ -95,36 +95,36 @@
 	HRCWH_LDP_CLEAR)
 #endif
 
-/* System performance - define the value i.e. CFG_XXX
+/* System performance - define the value i.e. CONFIG_SYS_XXX
 */
 
 /* Arbiter Configuration Register */
-#define CFG_ACR_PIPE_DEP	3	/* Arbiter pipeline depth (0-3) */
-#define CFG_ACR_RPTCNT		3	/* Arbiter repeat count (0-7) */
+#define CONFIG_SYS_ACR_PIPE_DEP	3	/* Arbiter pipeline depth (0-3) */
+#define CONFIG_SYS_ACR_RPTCNT		3	/* Arbiter repeat count (0-7) */
 
 /* System Priority Control Regsiter */
-#define CFG_SPCR_TSECEP		3	/* eTSEC1&2 emergency priority (0-3) */
+#define CONFIG_SYS_SPCR_TSECEP		3	/* eTSEC1&2 emergency priority (0-3) */
 
 /* System Clock Configuration Register */
-#define CFG_SCCR_TSEC1CM	1		/* eTSEC1 clock mode (0-3) */
-#define CFG_SCCR_TSEC2CM	1		/* eTSEC2 clock mode (0-3) */
-#define CFG_SCCR_SATACM		SCCR_SATACM_2	/* SATA1-4 clock mode (0-3) */
+#define CONFIG_SYS_SCCR_TSEC1CM	1		/* eTSEC1 clock mode (0-3) */
+#define CONFIG_SYS_SCCR_TSEC2CM	1		/* eTSEC2 clock mode (0-3) */
+#define CONFIG_SYS_SCCR_SATACM		SCCR_SATACM_2	/* SATA1-4 clock mode (0-3) */
 
 /*
  * System IO Config
  */
-#define CFG_SICRH		0x08200000
-#define CFG_SICRL		0x00000000
+#define CONFIG_SYS_SICRH		0x08200000
+#define CONFIG_SYS_SICRL		0x00000000
 
 /*
  * Output Buffer Impedance
  */
-#define CFG_OBIR		0x30100000
+#define CONFIG_SYS_OBIR		0x30100000
 
 /*
  * IMMR new address
  */
-#define CFG_IMMR		0xE0000000
+#define CONFIG_SYS_IMMR		0xE0000000
 
 /*
  * Device configurations
@@ -145,13 +145,13 @@
 /*
  * DDR Setup
  */
-#define CFG_DDR_BASE		0x00000000 /* DDR is system memory */
-#define CFG_SDRAM_BASE		CFG_DDR_BASE
-#define CFG_DDR_SDRAM_BASE	CFG_DDR_BASE
-#define CFG_DDR_SDRAM_CLK_CNTL	0x03000000
-#define CFG_83XX_DDR_USES_CS0
+#define CONFIG_SYS_DDR_BASE		0x00000000 /* DDR is system memory */
+#define CONFIG_SYS_SDRAM_BASE		CONFIG_SYS_DDR_BASE
+#define CONFIG_SYS_DDR_SDRAM_BASE	CONFIG_SYS_DDR_BASE
+#define CONFIG_SYS_DDR_SDRAM_CLK_CNTL	0x03000000
+#define CONFIG_SYS_83XX_DDR_USES_CS0
 
-#define CFG_DDRCDR_VALUE	(DDRCDR_DHC_EN | DDRCDR_ODT | DDRCDR_Q_DRN)
+#define CONFIG_SYS_DDRCDR_VALUE	(DDRCDR_DHC_EN | DDRCDR_ODT | DDRCDR_Q_DRN)
 
 #undef CONFIG_DDR_ECC		/* support DDR ECC function */
 #undef CONFIG_DDR_ECC_CMD	/* Use DDR ECC user commands */
@@ -161,13 +161,13 @@
 /*
  * Manually set up DDR parameters
  */
-#define CFG_DDR_SIZE		256		/* MB */
-#define CFG_DDR_CS0_BNDS	0x0000000f
-#define CFG_DDR_CS0_CONFIG	(CSCONFIG_EN | CSCONFIG_ODT_WR_ACS \
+#define CONFIG_SYS_DDR_SIZE		256		/* MB */
+#define CONFIG_SYS_DDR_CS0_BNDS	0x0000000f
+#define CONFIG_SYS_DDR_CS0_CONFIG	(CSCONFIG_EN | CSCONFIG_ODT_WR_ACS \
 				| CSCONFIG_ROW_BIT_13 | CSCONFIG_COL_BIT_10)
 
-#define CFG_DDR_TIMING_3	0x00000000
-#define CFG_DDR_TIMING_0	((0 << TIMING_CFG0_RWT_SHIFT) \
+#define CONFIG_SYS_DDR_TIMING_3	0x00000000
+#define CONFIG_SYS_DDR_TIMING_0	((0 << TIMING_CFG0_RWT_SHIFT) \
 				| (0 << TIMING_CFG0_WRT_SHIFT) \
 				| (0 << TIMING_CFG0_RRT_SHIFT) \
 				| (0 << TIMING_CFG0_WWT_SHIFT) \
@@ -177,7 +177,7 @@
 				| (2 << TIMING_CFG0_MRS_CYC_SHIFT))
 				/* 0x00220802 */
 				/* 0x00260802 */ /* DDR400 */
-#define CFG_DDR_TIMING_1	((3 << TIMING_CFG1_PRETOACT_SHIFT) \
+#define CONFIG_SYS_DDR_TIMING_1	((3 << TIMING_CFG1_PRETOACT_SHIFT) \
 				| (9 << TIMING_CFG1_ACTTOPRE_SHIFT) \
 				| (3 << TIMING_CFG1_ACTTORW_SHIFT) \
 				| (7 << TIMING_CFG1_CASLAT_SHIFT) \
@@ -187,124 +187,125 @@
 				| (2 << TIMING_CFG1_WRTORD_SHIFT))
 				/* 0x3935d322 */
 				/* 0x3937d322 */
-#define CFG_DDR_TIMING_2	0x02984cc8
+#define CONFIG_SYS_DDR_TIMING_2	0x02984cc8
 
-#define CFG_DDR_INTERVAL	((1545 << SDRAM_INTERVAL_REFINT_SHIFT) \
+#define CONFIG_SYS_DDR_INTERVAL	((1545 << SDRAM_INTERVAL_REFINT_SHIFT) \
 				| (256 << SDRAM_INTERVAL_BSTOPRE_SHIFT))
 				/* 0x06090100 */
 
 #if defined(CONFIG_DDR_2T_TIMING)
-#define CFG_DDR_SDRAM_CFG		(SDRAM_CFG_SREN \
+#define CONFIG_SYS_DDR_SDRAM_CFG		(SDRAM_CFG_SREN \
 				| 3 << SDRAM_CFG_SDRAM_TYPE_SHIFT \
 				| SDRAM_CFG_2T_EN \
 				| SDRAM_CFG_DBW_32)
 #else
-#define CFG_DDR_SDRAM_CFG		(SDRAM_CFG_SREN \
+#define CONFIG_SYS_DDR_SDRAM_CFG		(SDRAM_CFG_SREN \
 				| 3 << SDRAM_CFG_SDRAM_TYPE_SHIFT)
 				/* 0x43000000 */
 #endif
-#define CFG_DDR_SDRAM_CFG2	0x00001000 /* 1 posted refresh */
-#define CFG_DDR_MODE		((0x0440 << SDRAM_MODE_ESD_SHIFT) \
+#define CONFIG_SYS_DDR_SDRAM_CFG2	0x00001000 /* 1 posted refresh */
+#define CONFIG_SYS_DDR_MODE		((0x0440 << SDRAM_MODE_ESD_SHIFT) \
 				| (0x0442 << SDRAM_MODE_SD_SHIFT))
 				/* 0x04400442 */ /* DDR400 */
-#define CFG_DDR_MODE2		0x00000000;
+#define CONFIG_SYS_DDR_MODE2		0x00000000
 
 /*
  * Memory test
  */
-#undef CFG_DRAM_TEST		/* memory test, takes time */
-#define CFG_MEMTEST_START	0x00040000 /* memtest region */
-#define CFG_MEMTEST_END		0x0ef70010
+#undef CONFIG_SYS_DRAM_TEST		/* memory test, takes time */
+#define CONFIG_SYS_MEMTEST_START	0x00040000 /* memtest region */
+#define CONFIG_SYS_MEMTEST_END		0x0ef70010
 
 /*
  * The reserved memory
  */
-#define CFG_MONITOR_BASE	TEXT_BASE /* start of monitor */
+#define CONFIG_SYS_MONITOR_BASE	TEXT_BASE /* start of monitor */
 
-#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
-#define CFG_RAMBOOT
+#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
+#define CONFIG_SYS_RAMBOOT
 #else
-#undef	CFG_RAMBOOT
+#undef	CONFIG_SYS_RAMBOOT
 #endif
 
-#define CFG_MONITOR_LEN		(256 * 1024) /* Reserve 256 kB for Mon */
-#define CFG_MALLOC_LEN		(512 * 1024) /* Reserved for malloc */
+#define CONFIG_SYS_MONITOR_LEN		(256 * 1024) /* Reserve 256 kB for Mon */
+#define CONFIG_SYS_MALLOC_LEN		(512 * 1024) /* Reserved for malloc */
 
 /*
  * Initial RAM Base Address Setup
  */
-#define CFG_INIT_RAM_LOCK	1
-#define CFG_INIT_RAM_ADDR	0xE6000000 /* Initial RAM address */
-#define CFG_INIT_RAM_END	0x1000 /* End of used area in RAM */
-#define CFG_GBL_DATA_SIZE	0x100 /* num bytes initial data */
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_RAM_LOCK	1
+#define CONFIG_SYS_INIT_RAM_ADDR	0xE6000000 /* Initial RAM address */
+#define CONFIG_SYS_INIT_RAM_END	0x1000 /* End of used area in RAM */
+#define CONFIG_SYS_GBL_DATA_SIZE	0x100 /* num bytes initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
 
 /*
  * Local Bus Configuration & Clock Setup
  */
-#define CFG_LCRR		(LCRR_DBYP | LCRR_CLKDIV_8)
-#define CFG_LBC_LBCR		0x00000000
+#define CONFIG_SYS_LCRR		(LCRR_DBYP | LCRR_CLKDIV_8)
+#define CONFIG_SYS_LBC_LBCR		0x00000000
 
 /*
  * FLASH on the Local Bus
  */
-#define CFG_FLASH_CFI		/* use the Common Flash Interface */
+#define CONFIG_SYS_FLASH_CFI		/* use the Common Flash Interface */
 #define CONFIG_FLASH_CFI_DRIVER	/* use the CFI driver */
-#define CFG_FLASH_BASE		0xFE000000 /* FLASH base address */
-#define CFG_FLASH_SIZE		8 /* max FLASH size is 32M */
+#define CONFIG_SYS_FLASH_BASE		0xFE000000 /* FLASH base address */
+#define CONFIG_SYS_FLASH_SIZE		8 /* max FLASH size is 32M */
 
-#define CFG_FLASH_EMPTY_INFO			/* display empty sectors */
-#define CFG_FLASH_USE_BUFFER_WRITE		/* buffer up multiple bytes */
+#define CONFIG_SYS_FLASH_PROTECTION	1		/* Use h/w Flash protection. */
+#define CONFIG_SYS_FLASH_EMPTY_INFO			/* display empty sectors */
+#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE		/* buffer up multiple bytes */
 
-#define CFG_LBLAWBAR0_PRELIM	CFG_FLASH_BASE /* Window base at flash base */
-#define CFG_LBLAWAR0_PRELIM	0x80000016	/* 8 MB window size */
+#define CONFIG_SYS_LBLAWBAR0_PRELIM	CONFIG_SYS_FLASH_BASE /* Window base at flash base */
+#define CONFIG_SYS_LBLAWAR0_PRELIM	0x80000016	/* 8 MB window size */
 
-#define CFG_BR0_PRELIM		(CFG_FLASH_BASE | /* Flash Base address */ \
+#define CONFIG_SYS_BR0_PRELIM		(CONFIG_SYS_FLASH_BASE | /* Flash Base address */ \
 				(2 << BR_PS_SHIFT) | /* 16 bit port size */ \
 				BR_V) /* valid */
-#define CFG_OR0_PRELIM		(0xFF800000		/* 8 MByte */ \
+#define CONFIG_SYS_OR0_PRELIM		(0xFF800000		/* 8 MByte */ \
 				| OR_GPCM_XACS \
 				| OR_GPCM_SCY_9 \
 				| OR_GPCM_EHTR \
 				| OR_GPCM_EAD)
 				/* 0xFF806FF7	TODO SLOW 8 MB flash size */
 
-#define CFG_MAX_FLASH_BANKS	1 /* number of banks */
-#define CFG_MAX_FLASH_SECT	256 /* max sectors per device */
+#define CONFIG_SYS_MAX_FLASH_BANKS	1 /* number of banks */
+#define CONFIG_SYS_MAX_FLASH_SECT	256 /* max sectors per device */
 
-#undef	CFG_FLASH_CHECKSUM
-#define CFG_FLASH_ERASE_TOUT	60000	/* Flash Erase Timeout (ms) */
-#define CFG_FLASH_WRITE_TOUT	500	/* Flash Write Timeout (ms) */
+#undef	CONFIG_SYS_FLASH_CHECKSUM
+#define CONFIG_SYS_FLASH_ERASE_TOUT	60000	/* Flash Erase Timeout (ms) */
+#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Flash Write Timeout (ms) */
 
 /*
  * NAND Flash on the Local Bus
  */
-#define CFG_NAND_BASE		0xE0600000	/* 0xE0600000 */
-#define CFG_BR1_PRELIM		(CFG_NAND_BASE | \
+#define CONFIG_SYS_NAND_BASE		0xE0600000	/* 0xE0600000 */
+#define CONFIG_SYS_BR1_PRELIM		(CONFIG_SYS_NAND_BASE | \
 				 (2 << BR_DECC_SHIFT) |	/* Use HW ECC */ \
 				 BR_PS_8 |		/* Port Size = 8 bit */ \
 				 BR_MS_FCM |		/* MSEL = FCM */ \
 				 BR_V)			/* valid */
-#define CFG_OR1_PRELIM		(0xFFFF8000 |		/* length 32K */ \
+#define CONFIG_SYS_OR1_PRELIM		(0xFFFF8000 |		/* length 32K */ \
 				 OR_FCM_CSCT | \
 				 OR_FCM_CST | \
 				 OR_FCM_CHT | \
 				 OR_FCM_SCY_1 | \
 				 OR_FCM_TRLX | \
 				 OR_FCM_EHTR)
-#define CFG_LBLAWBAR1_PRELIM	CFG_NAND_BASE
-#define CFG_LBLAWAR1_PRELIM	0x8000000E	/* 32KB  */
+#define CONFIG_SYS_LBLAWBAR1_PRELIM	CONFIG_SYS_NAND_BASE
+#define CONFIG_SYS_LBLAWAR1_PRELIM	0x8000000E	/* 32KB  */
 
 /* Vitesse 7385 */
 
-#define CFG_VSC7385_BASE	0xF0000000
+#define CONFIG_SYS_VSC7385_BASE	0xF0000000
 
 #ifdef CONFIG_VSC7385_ENET
 
-#define CFG_BR2_PRELIM		0xf0000801		/* Base address */
-#define CFG_OR2_PRELIM		0xfffe09ff		/* 128K bytes*/
-#define CFG_LBLAWBAR2_PRELIM	CFG_VSC7385_BASE	/* Access Base */
-#define CFG_LBLAWAR2_PRELIM	0x80000010		/* Access Size 128K */
+#define CONFIG_SYS_BR2_PRELIM		0xf0000801		/* Base address */
+#define CONFIG_SYS_OR2_PRELIM		0xfffe09ff		/* 128K bytes*/
+#define CONFIG_SYS_LBLAWBAR2_PRELIM	CONFIG_SYS_VSC7385_BASE	/* Access Base */
+#define CONFIG_SYS_LBLAWAR2_PRELIM	0x80000010		/* Access Size 128K */
 
 #endif
 
@@ -313,16 +314,16 @@
  */
 #define CONFIG_CONS_INDEX	1
 #undef	CONFIG_SERIAL_SOFTWARE_FIFO
-#define CFG_NS16550
-#define CFG_NS16550_SERIAL
-#define CFG_NS16550_REG_SIZE	1
-#define CFG_NS16550_CLK		get_bus_freq(0)
+#define CONFIG_SYS_NS16550
+#define CONFIG_SYS_NS16550_SERIAL
+#define CONFIG_SYS_NS16550_REG_SIZE	1
+#define CONFIG_SYS_NS16550_CLK		get_bus_freq(0)
 
-#define CFG_BAUDRATE_TABLE \
+#define CONFIG_SYS_BAUDRATE_TABLE \
 	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 115200}
 
-#define CFG_NS16550_COM1	(CFG_IMMR+0x4500)
-#define CFG_NS16550_COM2	(CFG_IMMR+0x4600)
+#define CONFIG_SYS_NS16550_COM1	(CONFIG_SYS_IMMR+0x4500)
+#define CONFIG_SYS_NS16550_COM2	(CONFIG_SYS_IMMR+0x4600)
 
 /* SERDES */
 #define CONFIG_FSL_SERDES
@@ -330,9 +331,9 @@
 #define CONFIG_FSL_SERDES2	0xe3100
 
 /* Use the HUSH parser */
-#define CFG_HUSH_PARSER
-#ifdef	CFG_HUSH_PARSER
-#define CFG_PROMPT_HUSH_PS2 "> "
+#define CONFIG_SYS_HUSH_PARSER
+#ifdef	CONFIG_SYS_HUSH_PARSER
+#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
 #endif
 
 /* Pass open firmware flat tree */
@@ -344,42 +345,42 @@
 #define CONFIG_HARD_I2C		/* I2C with hardware support */
 #undef	CONFIG_SOFT_I2C		/* I2C bit-banged */
 #define CONFIG_FSL_I2C
-#define CFG_I2C_SPEED		400000 /* I2C speed and slave address */
-#define CFG_I2C_SLAVE		0x7F
-#define CFG_I2C_NOPROBES	{0x51} /* Don't probe these addrs */
-#define CFG_I2C_OFFSET		0x3000
-#define CFG_I2C2_OFFSET		0x3100
+#define CONFIG_SYS_I2C_SPEED		400000 /* I2C speed and slave address */
+#define CONFIG_SYS_I2C_SLAVE		0x7F
+#define CONFIG_SYS_I2C_NOPROBES	{0x51} /* Don't probe these addrs */
+#define CONFIG_SYS_I2C_OFFSET		0x3000
+#define CONFIG_SYS_I2C2_OFFSET		0x3100
 
 /*
  * Config on-board RTC
  */
 #define CONFIG_RTC_DS1374	/* use ds1374 rtc via i2c */
-#define CFG_I2C_RTC_ADDR	0x68 /* at address 0x68 */
+#define CONFIG_SYS_I2C_RTC_ADDR	0x68 /* at address 0x68 */
 
 /*
  * General PCI
  * Addresses are mapped 1-1.
  */
-#define CFG_PCI_MEM_BASE	0x80000000
-#define CFG_PCI_MEM_PHYS	CFG_PCI_MEM_BASE
-#define CFG_PCI_MEM_SIZE	0x10000000 /* 256M */
-#define CFG_PCI_MMIO_BASE	0x90000000
-#define CFG_PCI_MMIO_PHYS	CFG_PCI_MMIO_BASE
-#define CFG_PCI_MMIO_SIZE	0x10000000 /* 256M */
-#define CFG_PCI_IO_BASE		0x00000000
-#define CFG_PCI_IO_PHYS		0xE0300000
-#define CFG_PCI_IO_SIZE		0x100000 /* 1M */
-
-#define CFG_PCI_SLV_MEM_LOCAL	CFG_SDRAM_BASE
-#define CFG_PCI_SLV_MEM_BUS	0x00000000
-#define CFG_PCI_SLV_MEM_SIZE	0x80000000
+#define CONFIG_SYS_PCI_MEM_BASE	0x80000000
+#define CONFIG_SYS_PCI_MEM_PHYS	CONFIG_SYS_PCI_MEM_BASE
+#define CONFIG_SYS_PCI_MEM_SIZE	0x10000000 /* 256M */
+#define CONFIG_SYS_PCI_MMIO_BASE	0x90000000
+#define CONFIG_SYS_PCI_MMIO_PHYS	CONFIG_SYS_PCI_MMIO_BASE
+#define CONFIG_SYS_PCI_MMIO_SIZE	0x10000000 /* 256M */
+#define CONFIG_SYS_PCI_IO_BASE		0x00000000
+#define CONFIG_SYS_PCI_IO_PHYS		0xE0300000
+#define CONFIG_SYS_PCI_IO_SIZE		0x100000 /* 1M */
+
+#define CONFIG_SYS_PCI_SLV_MEM_LOCAL	CONFIG_SYS_SDRAM_BASE
+#define CONFIG_SYS_PCI_SLV_MEM_BUS	0x00000000
+#define CONFIG_SYS_PCI_SLV_MEM_SIZE	0x80000000
 
 #ifdef CONFIG_PCI
 #define CONFIG_NET_MULTI
 #define CONFIG_PCI_PNP		/* do pci plug-and-play */
 
 #undef CONFIG_PCI_SCAN_SHOW	/* show pci devices on startup */
-#define CFG_PCI_SUBSYS_VENDORID 0x1957	/* Freescale */
+#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x1957	/* Freescale */
 #endif	/* CONFIG_PCI */
 
 /*
@@ -395,7 +396,7 @@
 #ifdef CONFIG_TSEC1
 #define CONFIG_HAS_ETH0
 #define CONFIG_TSEC1_NAME		"TSEC0"
-#define CFG_TSEC1_OFFSET		0x24000
+#define CONFIG_SYS_TSEC1_OFFSET		0x24000
 #define TSEC1_PHY_ADDR			2
 #define TSEC1_FLAGS			(TSEC_GIGABIT | TSEC_REDUCED)
 #define TSEC1_PHYIDX			0
@@ -404,7 +405,7 @@
 #ifdef CONFIG_TSEC2
 #define CONFIG_HAS_ETH1
 #define CONFIG_TSEC2_NAME		"TSEC1"
-#define CFG_TSEC2_OFFSET		0x25000
+#define CONFIG_SYS_TSEC2_OFFSET		0x25000
 #define TSEC2_PHY_ADDR			0x1c
 #define TSEC2_FLAGS			(TSEC_GIGABIT | TSEC_REDUCED)
 #define TSEC2_PHYIDX			0
@@ -421,15 +422,15 @@
 #define CONFIG_LIBATA
 #define CONFIG_FSL_SATA
 
-#define CFG_SATA_MAX_DEVICE	2
+#define CONFIG_SYS_SATA_MAX_DEVICE	2
 #define CONFIG_SATA1
-#define CFG_SATA1_OFFSET	0x18000
-#define CFG_SATA1		(CFG_IMMR + CFG_SATA1_OFFSET)
-#define CFG_SATA1_FLAGS		FLAGS_DMA
+#define CONFIG_SYS_SATA1_OFFSET	0x18000
+#define CONFIG_SYS_SATA1		(CONFIG_SYS_IMMR + CONFIG_SYS_SATA1_OFFSET)
+#define CONFIG_SYS_SATA1_FLAGS		FLAGS_DMA
 #define CONFIG_SATA2
-#define CFG_SATA2_OFFSET	0x19000
-#define CFG_SATA2		(CFG_IMMR + CFG_SATA2_OFFSET)
-#define CFG_SATA2_FLAGS		FLAGS_DMA
+#define CONFIG_SYS_SATA2_OFFSET	0x19000
+#define CONFIG_SYS_SATA2		(CONFIG_SYS_IMMR + CONFIG_SYS_SATA2_OFFSET)
+#define CONFIG_SYS_SATA2_FLAGS		FLAGS_DMA
 
 #ifdef CONFIG_FSL_SATA
 #define CONFIG_LBA48
@@ -441,20 +442,20 @@
 /*
  * Environment
  */
-#ifndef CFG_RAMBOOT
-	#define CFG_ENV_IS_IN_FLASH	1
-	#define CFG_ENV_ADDR		(CFG_MONITOR_BASE+CFG_MONITOR_LEN)
-	#define CFG_ENV_SECT_SIZE	0x10000	/* 64K (one sector) for env */
-	#define CFG_ENV_SIZE		0x4000
+#ifndef CONFIG_SYS_RAMBOOT
+	#define CONFIG_ENV_IS_IN_FLASH	1
+	#define CONFIG_ENV_ADDR		(CONFIG_SYS_MONITOR_BASE+CONFIG_SYS_MONITOR_LEN)
+	#define CONFIG_ENV_SECT_SIZE	0x10000	/* 64K (one sector) for env */
+	#define CONFIG_ENV_SIZE		0x4000
 #else
-	#define CFG_NO_FLASH		1	/* Flash is not usable now */
-	#define CFG_ENV_IS_NOWHERE	1	/* Store ENV in memory only */
-	#define CFG_ENV_ADDR		(CFG_MONITOR_BASE-0x1000)
-	#define CFG_ENV_SIZE		0x2000
+	#define CONFIG_SYS_NO_FLASH		1	/* Flash is not usable now */
+	#define CONFIG_ENV_IS_NOWHERE	1	/* Store ENV in memory only */
+	#define CONFIG_ENV_ADDR		(CONFIG_SYS_MONITOR_BASE-0x1000)
+	#define CONFIG_ENV_SIZE		0x2000
 #endif
 
 #define CONFIG_LOADS_ECHO	1	/* echo on for serial download */
-#define CFG_LOADS_BAUD_CHANGE	1	/* allow baudrate change */
+#define CONFIG_SYS_LOADS_BAUD_CHANGE	1	/* allow baudrate change */
 
 /*
  * BOOTP options
@@ -479,7 +480,7 @@
 #define CONFIG_CMD_PCI
 #endif
 
-#if defined(CFG_RAMBOOT)
+#if defined(CONFIG_SYS_RAMBOOT)
 #undef CONFIG_CMD_ENV
 #undef CONFIG_CMD_LOADS
 #endif
@@ -491,34 +492,34 @@
 /*
  * Miscellaneous configurable options
  */
-#define CFG_LONGHELP		/* undef to save memory */
-#define CFG_LOAD_ADDR		0x2000000 /* default load address */
-#define CFG_PROMPT		"=> "	/* Monitor Command Prompt */
+#define CONFIG_SYS_LONGHELP		/* undef to save memory */
+#define CONFIG_SYS_LOAD_ADDR		0x2000000 /* default load address */
+#define CONFIG_SYS_PROMPT		"=> "	/* Monitor Command Prompt */
 
 #if defined(CONFIG_CMD_KGDB)
-	#define CFG_CBSIZE	1024 /* Console I/O Buffer Size */
+	#define CONFIG_SYS_CBSIZE	1024 /* Console I/O Buffer Size */
 #else
-	#define CFG_CBSIZE	256 /* Console I/O Buffer Size */
+	#define CONFIG_SYS_CBSIZE	256 /* Console I/O Buffer Size */
 #endif
 
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define CFG_MAXARGS	16		/* max number of command args */
-#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size */
-#define CFG_HZ		1000		/* decrementer freq: 1ms ticks */
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS	16		/* max number of command args */
+#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size */
+#define CONFIG_SYS_HZ		1000		/* decrementer freq: 1ms ticks */
 
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define CFG_BOOTMAPSZ		(8 << 20) /* Initial Memory map for Linux */
+#define CONFIG_SYS_BOOTMAPSZ		(8 << 20) /* Initial Memory map for Linux */
 
 /*
  * Core HID Setup
  */
-#define CFG_HID0_INIT		0x000000000
-#define CFG_HID0_FINAL		HID0_ENABLE_MACHINE_CHECK
-#define CFG_HID2		HID2_HBE
+#define CONFIG_SYS_HID0_INIT		0x000000000
+#define CONFIG_SYS_HID0_FINAL		HID0_ENABLE_MACHINE_CHECK
+#define CONFIG_SYS_HID2		HID2_HBE
 
 /*
  * MMU Setup
@@ -527,67 +528,67 @@
 #define CONFIG_HIGH_BATS	1	/* High BATs supported */
 
 /* DDR: cache cacheable */
-#define CFG_SDRAM_LOWER		CFG_SDRAM_BASE
-#define CFG_SDRAM_UPPER		(CFG_SDRAM_BASE + 0x10000000)
+#define CONFIG_SYS_SDRAM_LOWER		CONFIG_SYS_SDRAM_BASE
+#define CONFIG_SYS_SDRAM_UPPER		(CONFIG_SYS_SDRAM_BASE + 0x10000000)
 
-#define CFG_IBAT0L	(CFG_SDRAM_LOWER | BATL_PP_10 | BATL_MEMCOHERENCE)
-#define CFG_IBAT0U	(CFG_SDRAM_LOWER | BATU_BL_256M | BATU_VS | BATU_VP)
-#define CFG_DBAT0L	CFG_IBAT0L
-#define CFG_DBAT0U	CFG_IBAT0U
+#define CONFIG_SYS_IBAT0L	(CONFIG_SYS_SDRAM_LOWER | BATL_PP_10 | BATL_MEMCOHERENCE)
+#define CONFIG_SYS_IBAT0U	(CONFIG_SYS_SDRAM_LOWER | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CONFIG_SYS_DBAT0L	CONFIG_SYS_IBAT0L
+#define CONFIG_SYS_DBAT0U	CONFIG_SYS_IBAT0U
 
-#define CFG_IBAT1L	(CFG_SDRAM_UPPER | BATL_PP_10 | BATL_MEMCOHERENCE)
-#define CFG_IBAT1U	(CFG_SDRAM_UPPER | BATU_BL_256M | BATU_VS | BATU_VP)
-#define CFG_DBAT1L	CFG_IBAT1L
-#define CFG_DBAT1U	CFG_IBAT1U
+#define CONFIG_SYS_IBAT1L	(CONFIG_SYS_SDRAM_UPPER | BATL_PP_10 | BATL_MEMCOHERENCE)
+#define CONFIG_SYS_IBAT1U	(CONFIG_SYS_SDRAM_UPPER | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CONFIG_SYS_DBAT1L	CONFIG_SYS_IBAT1L
+#define CONFIG_SYS_DBAT1U	CONFIG_SYS_IBAT1U
 
 /* IMMRBAR, PCI IO and NAND: cache-inhibit and guarded */
-#define CFG_IBAT2L	(CFG_IMMR | BATL_PP_10 | \
+#define CONFIG_SYS_IBAT2L	(CONFIG_SYS_IMMR | BATL_PP_10 | \
 			BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
-#define CFG_IBAT2U	(CFG_IMMR | BATU_BL_8M | BATU_VS | BATU_VP)
-#define CFG_DBAT2L	CFG_IBAT2L
-#define CFG_DBAT2U	CFG_IBAT2U
+#define CONFIG_SYS_IBAT2U	(CONFIG_SYS_IMMR | BATU_BL_8M | BATU_VS | BATU_VP)
+#define CONFIG_SYS_DBAT2L	CONFIG_SYS_IBAT2L
+#define CONFIG_SYS_DBAT2U	CONFIG_SYS_IBAT2U
 
 /* L2 Switch: cache-inhibit and guarded */
-#define CFG_IBAT3L	(CFG_VSC7385_BASE | BATL_PP_10 | \
+#define CONFIG_SYS_IBAT3L	(CONFIG_SYS_VSC7385_BASE | BATL_PP_10 | \
 			BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
-#define CFG_IBAT3U	(CFG_VSC7385_BASE | BATU_BL_128K | BATU_VS | BATU_VP)
-#define CFG_DBAT3L	CFG_IBAT3L
-#define CFG_DBAT3U	CFG_IBAT3U
+#define CONFIG_SYS_IBAT3U	(CONFIG_SYS_VSC7385_BASE | BATU_BL_128K | BATU_VS | BATU_VP)
+#define CONFIG_SYS_DBAT3L	CONFIG_SYS_IBAT3L
+#define CONFIG_SYS_DBAT3U	CONFIG_SYS_IBAT3U
 
 /* FLASH: icache cacheable, but dcache-inhibit and guarded */
-#define CFG_IBAT4L	(CFG_FLASH_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
-#define CFG_IBAT4U	(CFG_FLASH_BASE | BATU_BL_32M | BATU_VS | BATU_VP)
-#define CFG_DBAT4L	(CFG_FLASH_BASE | BATL_PP_10 | \
+#define CONFIG_SYS_IBAT4L	(CONFIG_SYS_FLASH_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
+#define CONFIG_SYS_IBAT4U	(CONFIG_SYS_FLASH_BASE | BATU_BL_32M | BATU_VS | BATU_VP)
+#define CONFIG_SYS_DBAT4L	(CONFIG_SYS_FLASH_BASE | BATL_PP_10 | \
 			BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
-#define CFG_DBAT4U	CFG_IBAT4U
+#define CONFIG_SYS_DBAT4U	CONFIG_SYS_IBAT4U
 
 /* Stack in dcache: cacheable, no memory coherence */
-#define CFG_IBAT5L	(CFG_INIT_RAM_ADDR | BATL_PP_10)
-#define CFG_IBAT5U	(CFG_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP)
-#define CFG_DBAT5L	CFG_IBAT5L
-#define CFG_DBAT5U	CFG_IBAT5U
+#define CONFIG_SYS_IBAT5L	(CONFIG_SYS_INIT_RAM_ADDR | BATL_PP_10)
+#define CONFIG_SYS_IBAT5U	(CONFIG_SYS_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP)
+#define CONFIG_SYS_DBAT5L	CONFIG_SYS_IBAT5L
+#define CONFIG_SYS_DBAT5U	CONFIG_SYS_IBAT5U
 
 #ifdef CONFIG_PCI
 /* PCI MEM space: cacheable */
-#define CFG_IBAT6L	(CFG_PCI_MEM_PHYS | BATL_PP_10 | BATL_MEMCOHERENCE)
-#define CFG_IBAT6U	(CFG_PCI_MEM_PHYS | BATU_BL_256M | BATU_VS | BATU_VP)
-#define CFG_DBAT6L	CFG_IBAT6L
-#define CFG_DBAT6U	CFG_IBAT6U
+#define CONFIG_SYS_IBAT6L	(CONFIG_SYS_PCI_MEM_PHYS | BATL_PP_10 | BATL_MEMCOHERENCE)
+#define CONFIG_SYS_IBAT6U	(CONFIG_SYS_PCI_MEM_PHYS | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CONFIG_SYS_DBAT6L	CONFIG_SYS_IBAT6L
+#define CONFIG_SYS_DBAT6U	CONFIG_SYS_IBAT6U
 /* PCI MMIO space: cache-inhibit and guarded */
-#define CFG_IBAT7L	(CFG_PCI_MMIO_PHYS | BATL_PP_10 | \
+#define CONFIG_SYS_IBAT7L	(CONFIG_SYS_PCI_MMIO_PHYS | BATL_PP_10 | \
 			BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
-#define CFG_IBAT7U	(CFG_PCI_MMIO_PHYS | BATU_BL_256M | BATU_VS | BATU_VP)
-#define CFG_DBAT7L	CFG_IBAT7L
-#define CFG_DBAT7U	CFG_IBAT7U
+#define CONFIG_SYS_IBAT7U	(CONFIG_SYS_PCI_MMIO_PHYS | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CONFIG_SYS_DBAT7L	CONFIG_SYS_IBAT7L
+#define CONFIG_SYS_DBAT7U	CONFIG_SYS_IBAT7U
 #else
-#define CFG_IBAT6L	(0)
-#define CFG_IBAT6U	(0)
-#define CFG_IBAT7L	(0)
-#define CFG_IBAT7U	(0)
-#define CFG_DBAT6L	CFG_IBAT6L
-#define CFG_DBAT6U	CFG_IBAT6U
-#define CFG_DBAT7L	CFG_IBAT7L
-#define CFG_DBAT7U	CFG_IBAT7U
+#define CONFIG_SYS_IBAT6L	(0)
+#define CONFIG_SYS_IBAT6U	(0)
+#define CONFIG_SYS_IBAT7L	(0)
+#define CONFIG_SYS_IBAT7U	(0)
+#define CONFIG_SYS_DBAT6L	CONFIG_SYS_IBAT6L
+#define CONFIG_SYS_DBAT6U	CONFIG_SYS_IBAT6U
+#define CONFIG_SYS_DBAT7L	CONFIG_SYS_IBAT7L
+#define CONFIG_SYS_DBAT7U	CONFIG_SYS_IBAT7U
 #endif
 
 /*
@@ -632,7 +633,7 @@
 #define CONFIG_FDTFILE		mpc8379_rdb.dtb
 
 #define CONFIG_LOADADDR		500000	/* default location for tftp and bootm */
-#define CONFIG_BOOTDELAY	-1	/* -1 disables auto-boot */
+#define CONFIG_BOOTDELAY	6	/* -1 disables auto-boot */
 #define CONFIG_BAUDRATE		115200
 
 #define XMK_STR(x)	#x
diff --git a/include/configs/MPC8536DS.h b/include/configs/MPC8536DS.h
index 17cc934e4..532c3df77 100644
--- a/include/configs/MPC8536DS.h
+++ b/include/configs/MPC8536DS.h
@@ -41,6 +41,7 @@
 #define CONFIG_PCIE3		1	/* PCIE controler 3 (ULI bridge) */
 #define CONFIG_FSL_PCI_INIT	1	/* Use common FSL init code */
 #define CONFIG_FSL_PCIE_RESET	1	/* need PCIe reset errata */
+#define CONFIG_SYS_PCI_64BIT	1	/* enable 64-bit PCI resources */
 
 #define CONFIG_FSL_LAW		1	/* Use common FSL init code */
 
@@ -59,7 +60,7 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 extern unsigned long get_board_ddr_clk(unsigned long dummy);
 #endif
 #define CONFIG_SYS_CLK_FREQ	get_board_sys_clk(0) /* sysclk for MPC85xx */
-/* #define CONFIG_DDR_CLK_FREQ	get_board_ddr_clk(0) /\* ddrclk for MPC85xx *\/ FIXME-8536*/
+#define CONFIG_DDR_CLK_FREQ	get_board_ddr_clk(0)
 #define CONFIG_ICS307_REFCLK_HZ	33333000  /* ICS307 clock chip ref freq */
 #define CONFIG_GET_CLK_FROM_ICS307	  /* decode sysclk and ddrclk freq
 					     from ICS307 instead of switches */
@@ -69,27 +70,26 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy);
  */
 #define CONFIG_L2_CACHE			/* toggle L2 cache */
 #define CONFIG_BTB			/* toggle branch predition */
-#define CONFIG_ADDR_STREAMING		/* toggle addr streaming */
 
 #define CONFIG_ENABLE_36BIT_PHYS	1
 
-#define CFG_MEMTEST_START	0x00000000	/* memtest works on */
-#define CFG_MEMTEST_END		0x7fffffff
+#define CONFIG_SYS_MEMTEST_START	0x00000000	/* memtest works on */
+#define CONFIG_SYS_MEMTEST_END		0x7fffffff
 #define CONFIG_PANIC_HANG	/* do not reset board on panic */
 
 /*
  * Base addresses -- Note these are effective addresses where the
  * actual resources get mapped (not physical addresses)
  */
-#define CFG_CCSRBAR_DEFAULT	0xff700000	/* CCSRBAR Default */
-#define CFG_CCSRBAR		0xffe00000	/* relocated CCSRBAR */
-#define CFG_CCSRBAR_PHYS	CFG_CCSRBAR	/* physical addr of CCSRBAR */
-#define CFG_IMMR		CFG_CCSRBAR	/* PQII uses CFG_IMMR */
+#define CONFIG_SYS_CCSRBAR_DEFAULT	0xff700000	/* CCSRBAR Default */
+#define CONFIG_SYS_CCSRBAR		0xffe00000	/* relocated CCSRBAR */
+#define CONFIG_SYS_CCSRBAR_PHYS	CONFIG_SYS_CCSRBAR	/* physical addr of CCSRBAR */
+#define CONFIG_SYS_IMMR		CONFIG_SYS_CCSRBAR	/* PQII uses CONFIG_SYS_IMMR */
 
-#define CFG_PCI1_ADDR		(CFG_CCSRBAR+0x8000)
-#define CFG_PCIE1_ADDR		(CFG_CCSRBAR+0xa000)
-#define CFG_PCIE2_ADDR		(CFG_CCSRBAR+0x9000)
-#define CFG_PCIE3_ADDR		(CFG_CCSRBAR+0xb000)
+#define CONFIG_SYS_PCI1_ADDR		(CONFIG_SYS_CCSRBAR+0x8000)
+#define CONFIG_SYS_PCIE1_ADDR		(CONFIG_SYS_CCSRBAR+0xa000)
+#define CONFIG_SYS_PCIE2_ADDR		(CONFIG_SYS_CCSRBAR+0x9000)
+#define CONFIG_SYS_PCIE3_ADDR		(CONFIG_SYS_CCSRBAR+0xb000)
 
 /* DDR Setup */
 #define CONFIG_FSL_DDR2
@@ -98,11 +98,11 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy);
 #define CONFIG_DDR_SPD
 #undef CONFIG_DDR_DLL
 
-#undef CONFIG_ECC_INIT_VIA_DDRCONTROLLER	/* DDR controller or DMA? */
+#define CONFIG_ECC_INIT_VIA_DDRCONTROLLER	/* DDR controller or DMA? */
 #define CONFIG_MEM_INIT_VALUE	0xDeadBeef
 
-#define CFG_DDR_SDRAM_BASE	0x00000000
-#define CFG_SDRAM_BASE		CFG_DDR_SDRAM_BASE
+#define CONFIG_SYS_DDR_SDRAM_BASE	0x00000000
+#define CONFIG_SYS_SDRAM_BASE		CONFIG_SYS_DDR_SDRAM_BASE
 
 #define CONFIG_NUM_DDR_CONTROLLERS	1
 #define CONFIG_DIMM_SLOTS_PER_CTLR	1
@@ -110,37 +110,29 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy);
 
 /* I2C addresses of SPD EEPROMs */
 #define SPD_EEPROM_ADDRESS	0x51	/* CTLR 0 DIMM 0 */
-#define CFG_SPD_BUS_NUM		1
+#define CONFIG_SYS_SPD_BUS_NUM		1
 
 /* These are used when DDR doesn't use SPD. */
-#define CFG_SDRAM_SIZE		256		/* DDR is 256MB */
-#define CFG_DDR_CS0_BNDS	0x0000001F
-#define CFG_DDR_CS0_CONFIG	0x80010102	/* Enable, no interleaving */
-#define CFG_DDR_TIMING_3	0x00000000
-#define CFG_DDR_TIMING_0	0x00260802
-#define CFG_DDR_TIMING_1	0x3935d322
-#define CFG_DDR_TIMING_2	0x14904cc8
-#define CFG_DDR_MODE_1		0x00480432
-#define CFG_DDR_MODE_2		0x00000000
-#define CFG_DDR_INTERVAL	0x06180100
-#define CFG_DDR_DATA_INIT	0xdeadbeef
-#define CFG_DDR_CLK_CTRL	0x03800000
-#define CFG_DDR_OCD_CTRL	0x00000000
-#define CFG_DDR_OCD_STATUS	0x00000000
-#define CFG_DDR_CONTROL		0xC3008000	/* Type = DDR2 */
-#define CFG_DDR_CONTROL2	0x04400010
-
-#define CFG_DDR_ERR_INT_EN	0x0000000d
-#define CFG_DDR_ERR_DIS		0x00000000
-#define CFG_DDR_SBE		0x00010000
-
-/* FIXME: Not used in fixed_sdram function */
-#define CFG_DDR_MODE		0x00000022
-#define CFG_DDR_CS1_BNDS	0x00000000
-#define CFG_DDR_CS2_BNDS	0x00000FFF	/* Not done */
-#define CFG_DDR_CS3_BNDS	0x00000FFF	/* Not done */
-#define CFG_DDR_CS4_BNDS	0x00000FFF	/* Not done */
-#define CFG_DDR_CS5_BNDS	0x00000FFF	/* Not done */
+#define CONFIG_SYS_SDRAM_SIZE		256		/* DDR is 256MB */
+#define CONFIG_SYS_DDR_CS0_BNDS	0x0000001F
+#define CONFIG_SYS_DDR_CS0_CONFIG	0x80010102	/* Enable, no interleaving */
+#define CONFIG_SYS_DDR_TIMING_3	0x00000000
+#define CONFIG_SYS_DDR_TIMING_0	0x00260802
+#define CONFIG_SYS_DDR_TIMING_1	0x3935d322
+#define CONFIG_SYS_DDR_TIMING_2	0x14904cc8
+#define CONFIG_SYS_DDR_MODE_1		0x00480432
+#define CONFIG_SYS_DDR_MODE_2		0x00000000
+#define CONFIG_SYS_DDR_INTERVAL	0x06180100
+#define CONFIG_SYS_DDR_DATA_INIT	0xdeadbeef
+#define CONFIG_SYS_DDR_CLK_CTRL	0x03800000
+#define CONFIG_SYS_DDR_OCD_CTRL	0x00000000
+#define CONFIG_SYS_DDR_OCD_STATUS	0x00000000
+#define CONFIG_SYS_DDR_CONTROL		0xC3008000	/* Type = DDR2 */
+#define CONFIG_SYS_DDR_CONTROL2	0x04400010
+
+#define CONFIG_SYS_DDR_ERR_INT_EN	0x0000000d
+#define CONFIG_SYS_DDR_ERR_DIS		0x00000000
+#define CONFIG_SYS_DDR_SBE		0x00010000
 
 /* Make sure required options are set */
 #ifndef CONFIG_SPD_EEPROM
@@ -162,8 +154,9 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy);
  * 0xXXXX_XXXX	0xXXXX_XXXX	SRAM			YZ M Cacheable
  *
  * Localbus non-cacheable
- * 0xe000_0000	0xe80f_ffff	Promjet/free		128M non-cacheable
+ * 0xe000_0000	0xe7ff_ffff	Promjet/free		128M non-cacheable
  * 0xe800_0000	0xefff_ffff	FLASH			128M non-cacheable
+ * 0xffa0_0000	0xffaf_ffff	NAND			1M non-cacheable
  * 0xffdf_0000	0xffdf_7fff	PIXIS			32K non-cacheable TLB0
  * 0xffd0_0000	0xffd0_3fff	L1 for stack		16K Cacheable TLB0
  * 0xffe0_0000	0xffef_ffff	CCSR			1M non-cacheable
@@ -172,38 +165,38 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy);
 /*
  * Local Bus Definitions
  */
-#define CFG_FLASH_BASE		0xe0000000	/* start of FLASH 128M */
+#define CONFIG_SYS_FLASH_BASE		0xe0000000	/* start of FLASH 128M */
 
-#define CFG_BR0_PRELIM		0xe8001001
-#define CFG_OR0_PRELIM		0xf8000ff7
+#define CONFIG_SYS_BR0_PRELIM		0xe8001001
+#define CONFIG_SYS_OR0_PRELIM		0xf8000ff7
 
-#define CFG_BR1_PRELIM		0xe0001001
-#define CFG_OR1_PRELIM		0xf8000ff7
+#define CONFIG_SYS_BR1_PRELIM		0xe0001001
+#define CONFIG_SYS_OR1_PRELIM		0xf8000ff7
 
-#define CFG_FLASH_BANKS_LIST	{CFG_FLASH_BASE + 0x8000000, CFG_FLASH_BASE}
-#define CFG_FLASH_QUIET_TEST
+#define CONFIG_SYS_FLASH_BANKS_LIST	{CONFIG_SYS_FLASH_BASE + 0x8000000, CONFIG_SYS_FLASH_BASE}
+#define CONFIG_SYS_FLASH_QUIET_TEST
 #define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */
 
-#define CFG_MAX_FLASH_BANKS	2		/* number of banks */
-#define CFG_MAX_FLASH_SECT	1024		/* sectors per device */
-#undef	CFG_FLASH_CHECKSUM
-#define CFG_FLASH_ERASE_TOUT	60000		/* Flash Erase Timeout (ms) */
-#define CFG_FLASH_WRITE_TOUT	500		/* Flash Write Timeout (ms) */
+#define CONFIG_SYS_MAX_FLASH_BANKS	2		/* number of banks */
+#define CONFIG_SYS_MAX_FLASH_SECT	1024		/* sectors per device */
+#undef	CONFIG_SYS_FLASH_CHECKSUM
+#define CONFIG_SYS_FLASH_ERASE_TOUT	60000		/* Flash Erase Timeout (ms) */
+#define CONFIG_SYS_FLASH_WRITE_TOUT	500		/* Flash Write Timeout (ms) */
 
-#define CFG_MONITOR_BASE	TEXT_BASE	/* start of monitor */
+#define CONFIG_SYS_MONITOR_BASE	TEXT_BASE	/* start of monitor */
 
 #define CONFIG_FLASH_CFI_DRIVER
-#define CFG_FLASH_CFI
-#define CFG_FLASH_EMPTY_INFO
-#define CFG_FLASH_AMD_CHECK_DQ7
+#define CONFIG_SYS_FLASH_CFI
+#define CONFIG_SYS_FLASH_EMPTY_INFO
+#define CONFIG_SYS_FLASH_AMD_CHECK_DQ7
 
 #define CONFIG_BOARD_EARLY_INIT_R	/* call board_early_init_r function */
 
 #define CONFIG_FSL_PIXIS	1	/* use common PIXIS code */
 #define PIXIS_BASE	0xffdf0000	/* PIXIS registers */
 
-#define CFG_BR3_PRELIM	(PIXIS_BASE | 0x0801)	/* port size 8bit */
-#define CFG_OR3_PRELIM		0xffffeff7	/* 32KB but only 4k mapped */
+#define CONFIG_SYS_BR3_PRELIM	(PIXIS_BASE | 0x0801)	/* port size 8bit */
+#define CONFIG_SYS_OR3_PRELIM		0xffffeff7	/* 32KB but only 4k mapped */
 
 #define PIXIS_ID		0x0	/* Board ID at offset 0 */
 #define PIXIS_VER		0x1	/* Board version at offset 1 */
@@ -235,20 +228,69 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy);
 /* old pixis referenced names */
 #define PIXIS_VCLKH		0x19	/* VELA VCLKH register */
 #define PIXIS_VCLKL		0x1A	/* VELA VCLKL register */
-#define CFG_PIXIS_VBOOT_MASK	0xc0
-
-/* define to use L1 as initial stack */
-#define CONFIG_L1_INIT_RAM
-#define CFG_INIT_RAM_LOCK	1
-#define CFG_INIT_RAM_ADDR	0xffd00000	/* Initial L1 address */
-#define CFG_INIT_RAM_END	0x00004000	/* End of used area in RAM */
-
-#define CFG_GBL_DATA_SIZE	128	/* num bytes initial data */
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
-
-#define CFG_MONITOR_LEN		(256 * 1024) /* Reserve 256 kB for Mon */
-#define CFG_MALLOC_LEN		(1024 * 1024)	/* Reserved for malloc */
+#define CONFIG_SYS_PIXIS_VBOOT_MASK	0xc0
+
+#define CONFIG_SYS_INIT_RAM_LOCK	1
+#define CONFIG_SYS_INIT_RAM_ADDR	0xffd00000	/* Initial L1 address */
+#define CONFIG_SYS_INIT_RAM_END	0x00004000	/* End of used area in RAM */
+
+#define CONFIG_SYS_GBL_DATA_SIZE	128	/* num bytes initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
+
+#define CONFIG_SYS_MONITOR_LEN		(256 * 1024) /* Reserve 256 kB for Mon */
+#define CONFIG_SYS_MALLOC_LEN		(1024 * 1024)	/* Reserved for malloc */
+
+#define CONFIG_SYS_NAND_BASE           0xffa00000
+#define CONFIG_SYS_NAND_BASE_PHYS      CONFIG_SYS_NAND_BASE
+#define CONFIG_SYS_NAND_BASE_LIST     { CONFIG_SYS_NAND_BASE,\
+				CONFIG_SYS_NAND_BASE + 0x40000, \
+				CONFIG_SYS_NAND_BASE + 0x80000, \
+				CONFIG_SYS_NAND_BASE + 0xC0000}
+#define CONFIG_SYS_MAX_NAND_DEVICE	4
+#define NAND_MAX_CHIPS		1
+#define CONFIG_MTD_NAND_VERIFY_WRITE
+#define CONFIG_CMD_NAND		1
+#define CONFIG_NAND_FSL_ELBC	1
+#define CONFIG_SYS_NAND_BLOCK_SIZE	(128 * 1024)
+
+/* NAND flash config */
+#define CONFIG_NAND_BR_PRELIM	(CONFIG_SYS_NAND_BASE_PHYS \
+				| (2<<BR_DECC_SHIFT)    /* Use HW ECC */ \
+				| BR_PS_8              /* Port Size = 8 bit */ \
+				| BR_MS_FCM             /* MSEL = FCM */ \
+				| BR_V)                 /* valid */
+#define CONFIG_NAND_OR_PRELIM	(0xFFFC0000            /* length 256K */ \
+				| OR_FCM_PGS            /* Large Page*/ \
+				| OR_FCM_CSCT \
+				| OR_FCM_CST \
+				| OR_FCM_CHT \
+				| OR_FCM_SCY_1 \
+				| OR_FCM_TRLX \
+				| OR_FCM_EHTR)
+
+#define CONFIG_SYS_BR2_PRELIM  CONFIG_NAND_BR_PRELIM  /* NAND Base Address */
+#define CONFIG_SYS_OR2_PRELIM  CONFIG_NAND_OR_PRELIM  /* NAND Options */
+
+#define CONFIG_SYS_BR4_PRELIM  ((CONFIG_SYS_NAND_BASE_PHYS + 0x40000)\
+				| (2<<BR_DECC_SHIFT)    /* Use HW ECC */ \
+				| BR_PS_8              /* Port Size = 8 bit */ \
+				| BR_MS_FCM             /* MSEL = FCM */ \
+				| BR_V)                 /* valid */
+#define CONFIG_SYS_OR4_PRELIM	CONFIG_NAND_OR_PRELIM     /* NAND Options */
+#define CONFIG_SYS_BR5_PRELIM  ((CONFIG_SYS_NAND_BASE_PHYS + 0x80000)\
+				| (2<<BR_DECC_SHIFT)    /* Use HW ECC */ \
+				| BR_PS_8              /* Port Size = 8 bit */ \
+				| BR_MS_FCM             /* MSEL = FCM */ \
+				| BR_V)                 /* valid */
+#define CONFIG_SYS_OR5_PRELIM	CONFIG_NAND_OR_PRELIM     /* NAND Options */
+
+#define CONFIG_SYS_BR6_PRELIM  ((CONFIG_SYS_NAND_BASE_PHYS + 0xC0000)\
+				| (2<<BR_DECC_SHIFT)    /* Use HW ECC */ \
+				| BR_PS_8              /* Port Size = 8 bit */ \
+				| BR_MS_FCM             /* MSEL = FCM */ \
+				| BR_V)                 /* valid */
+#define CONFIG_SYS_OR6_PRELIM	CONFIG_NAND_OR_PRELIM     /* NAND Options */
 
 /* Serial Port - controlled on board with jumper J8
  * open - index 2
@@ -256,21 +298,21 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy);
  */
 #define CONFIG_CONS_INDEX	1
 #undef	CONFIG_SERIAL_SOFTWARE_FIFO
-#define CFG_NS16550
-#define CFG_NS16550_SERIAL
-#define CFG_NS16550_REG_SIZE	1
-#define CFG_NS16550_CLK		get_bus_freq(0)
+#define CONFIG_SYS_NS16550
+#define CONFIG_SYS_NS16550_SERIAL
+#define CONFIG_SYS_NS16550_REG_SIZE	1
+#define CONFIG_SYS_NS16550_CLK		get_bus_freq(0)
 
-#define CFG_BAUDRATE_TABLE	\
+#define CONFIG_SYS_BAUDRATE_TABLE	\
 	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200}
 
-#define CFG_NS16550_COM1	(CFG_CCSRBAR+0x4500)
-#define CFG_NS16550_COM2	(CFG_CCSRBAR+0x4600)
+#define CONFIG_SYS_NS16550_COM1	(CONFIG_SYS_CCSRBAR+0x4500)
+#define CONFIG_SYS_NS16550_COM2	(CONFIG_SYS_CCSRBAR+0x4600)
 
 /* Use the HUSH parser */
-#define CFG_HUSH_PARSER
-#ifdef	CFG_HUSH_PARSER
-#define CFG_PROMPT_HUSH_PS2 "> "
+#define CONFIG_SYS_HUSH_PARSER
+#ifdef	CONFIG_SYS_HUSH_PARSER
+#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
 #endif
 
 /*
@@ -280,8 +322,8 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy);
 #define CONFIG_OF_BOARD_SETUP		1
 #define CONFIG_OF_STDOUT_VIA_ALIAS	1
 
-#define CFG_64BIT_STRTOUL		1
-#define CFG_64BIT_VSPRINTF		1
+#define CONFIG_SYS_64BIT_STRTOUL		1
+#define CONFIG_SYS_64BIT_VSPRINTF		1
 
 
 /*
@@ -292,64 +334,58 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy);
 #undef	CONFIG_SOFT_I2C		/* I2C bit-banged */
 #define CONFIG_I2C_MULTI_BUS
 #define CONFIG_I2C_CMD_TREE
-#define CFG_I2C_SPEED		400000	/* I2C speed and slave address */
-#define CFG_I2C_SLAVE		0x7F
-#define CFG_I2C_NOPROBES	{{0, 0x29}}	/* Don't probe these addrs */
-#define CFG_I2C_OFFSET		0x3000
-#define CFG_I2C2_OFFSET		0x3100
+#define CONFIG_SYS_I2C_SPEED		400000	/* I2C speed and slave address */
+#define CONFIG_SYS_I2C_SLAVE		0x7F
+#define CONFIG_SYS_I2C_NOPROBES	{{0, 0x29}}	/* Don't probe these addrs */
+#define CONFIG_SYS_I2C_OFFSET		0x3000
+#define CONFIG_SYS_I2C2_OFFSET		0x3100
 
 /*
  * I2C2 EEPROM
  */
-#define CFG_ID_EEPROM
-#ifdef CFG_ID_EEPROM
 #define CONFIG_ID_EEPROM
-#define CFG_I2C_EEPROM_NXID
+#ifdef CONFIG_ID_EEPROM
+#define CONFIG_SYS_I2C_EEPROM_NXID
 #endif
-#define CFG_I2C_EEPROM_ADDR	0x57
-#define CFG_I2C_EEPROM_ADDR_LEN	1
-#define CFG_EEPROM_BUS_NUM	1
+#define CONFIG_SYS_I2C_EEPROM_ADDR	0x57
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN	1
+#define CONFIG_SYS_EEPROM_BUS_NUM	1
 
 /*
  * General PCI
  * Memory space is mapped 1-1, but I/O space must start from 0.
  */
 
-/* PCI view of System Memory */
-#define CFG_PCI_MEMORY_BUS	0x00000000
-#define CFG_PCI_MEMORY_PHYS	0x00000000
-#define CFG_PCI_MEMORY_SIZE	0x80000000
-
-#define CFG_PCI1_MEM_BASE	0x80000000
-#define CFG_PCI1_MEM_PHYS	CFG_PCI1_MEM_BASE
-#define CFG_PCI1_MEM_SIZE	0x10000000	/* 256M */
-#define CFG_PCI1_IO_BASE	0x00000000
-#define CFG_PCI1_IO_PHYS	0xffc00000
-#define CFG_PCI1_IO_SIZE	0x00010000	/* 64k */
+#define CONFIG_SYS_PCI1_MEM_BASE	0x80000000
+#define CONFIG_SYS_PCI1_MEM_PHYS	CONFIG_SYS_PCI1_MEM_BASE
+#define CONFIG_SYS_PCI1_MEM_SIZE	0x10000000	/* 256M */
+#define CONFIG_SYS_PCI1_IO_BASE	0x00000000
+#define CONFIG_SYS_PCI1_IO_PHYS	0xffc00000
+#define CONFIG_SYS_PCI1_IO_SIZE	0x00010000	/* 64k */
 
 /* controller 1, Slot 1, tgtid 1, Base address a000 */
-#define CFG_PCIE1_MEM_BASE	0x90000000
-#define CFG_PCIE1_MEM_PHYS	CFG_PCIE1_MEM_BASE
-#define CFG_PCIE1_MEM_SIZE	0x08000000	/* 128M */
-#define CFG_PCIE1_IO_BASE	0x00000000
-#define CFG_PCIE1_IO_PHYS	0xffc10000
-#define CFG_PCIE1_IO_SIZE	0x00010000	/* 64k */
+#define CONFIG_SYS_PCIE1_MEM_BASE	0x90000000
+#define CONFIG_SYS_PCIE1_MEM_PHYS	CONFIG_SYS_PCIE1_MEM_BASE
+#define CONFIG_SYS_PCIE1_MEM_SIZE	0x08000000	/* 128M */
+#define CONFIG_SYS_PCIE1_IO_BASE	0x00000000
+#define CONFIG_SYS_PCIE1_IO_PHYS	0xffc10000
+#define CONFIG_SYS_PCIE1_IO_SIZE	0x00010000	/* 64k */
 
 /* controller 2, Slot 2, tgtid 2, Base address 9000 */
-#define CFG_PCIE2_MEM_BASE	0x98000000
-#define CFG_PCIE2_MEM_PHYS	CFG_PCIE2_MEM_BASE
-#define CFG_PCIE2_MEM_SIZE	0x08000000	/* 128M */
-#define CFG_PCIE2_IO_BASE	0x00000000
-#define CFG_PCIE2_IO_PHYS	0xffc20000
-#define CFG_PCIE2_IO_SIZE	0x00010000	/* 64k */
+#define CONFIG_SYS_PCIE2_MEM_BASE	0x98000000
+#define CONFIG_SYS_PCIE2_MEM_PHYS	CONFIG_SYS_PCIE2_MEM_BASE
+#define CONFIG_SYS_PCIE2_MEM_SIZE	0x08000000	/* 128M */
+#define CONFIG_SYS_PCIE2_IO_BASE	0x00000000
+#define CONFIG_SYS_PCIE2_IO_PHYS	0xffc20000
+#define CONFIG_SYS_PCIE2_IO_SIZE	0x00010000	/* 64k */
 
 /* controller 3, direct to uli, tgtid 3, Base address 8000 */
-#define CFG_PCIE3_MEM_BASE	0xa0000000
-#define CFG_PCIE3_MEM_PHYS	CFG_PCIE3_MEM_BASE
-#define CFG_PCIE3_MEM_SIZE	0x20000000	/* 512M */
-#define CFG_PCIE3_IO_BASE	0x00000000
-#define CFG_PCIE3_IO_PHYS	0xffc30000
-#define CFG_PCIE3_IO_SIZE	0x00010000	/* 64k */
+#define CONFIG_SYS_PCIE3_MEM_BASE	0xa0000000
+#define CONFIG_SYS_PCIE3_MEM_PHYS	CONFIG_SYS_PCIE3_MEM_BASE
+#define CONFIG_SYS_PCIE3_MEM_SIZE	0x20000000	/* 512M */
+#define CONFIG_SYS_PCIE3_IO_BASE	0x00000000
+#define CONFIG_SYS_PCIE3_IO_PHYS	0xffc30000
+#define CONFIG_SYS_PCIE3_IO_SIZE	0x00010000	/* 64k */
 
 #if defined(CONFIG_PCI)
 
@@ -357,10 +393,10 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy);
 #define CONFIG_PCI_PNP			/* do pci plug-and-play */
 
 /*PCIE video card used*/
-#define VIDEO_IO_OFFSET		CFG_PCIE3_IO_PHYS
+#define VIDEO_IO_OFFSET		CONFIG_SYS_PCIE3_IO_PHYS
 
 /*PCI video card used*/
-/*#define VIDEO_IO_OFFSET	CFG_PCI1_IO_PHYS*/
+/*#define VIDEO_IO_OFFSET	CONFIG_SYS_PCI1_IO_PHYS*/
 
 /* video */
 #define CONFIG_VIDEO
@@ -373,7 +409,7 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy);
 #define CONFIG_ATI_RADEON_FB
 #define CONFIG_VIDEO_LOGO
 /*#define CONFIG_CONSOLE_CURSOR*/
-#define CFG_ISA_IO_BASE_ADDRESS CFG_PCIE3_IO_PHYS
+#define CONFIG_SYS_ISA_IO_BASE_ADDRESS CONFIG_SYS_PCIE3_IO_PHYS
 #endif
 
 #undef CONFIG_EEPRO100
@@ -387,8 +423,8 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy);
 #endif
 
 #ifndef CONFIG_PCI_PNP
-	#define PCI_ENET0_IOADDR	CFG_PCI1_IO_BASE
-	#define PCI_ENET0_MEMADDR	CFG_PCI1_IO_BASE
+	#define PCI_ENET0_IOADDR	CONFIG_SYS_PCI1_IO_BASE
+	#define PCI_ENET0_MEMADDR	CONFIG_SYS_PCI1_IO_BASE
 	#define PCI_IDSEL_NUMBER	0x11	/* IDSEL = AD11 */
 #endif
 
@@ -400,13 +436,13 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy);
 #define CONFIG_LIBATA
 #define CONFIG_FSL_SATA
 
-#define CFG_SATA_MAX_DEVICE	2
+#define CONFIG_SYS_SATA_MAX_DEVICE	2
 #define CONFIG_SATA1
-#define CFG_SATA1		CFG_MPC85xx_SATA1_ADDR
-#define CFG_SATA1_FLAGS		FLAGS_DMA
+#define CONFIG_SYS_SATA1		CONFIG_SYS_MPC85xx_SATA1_ADDR
+#define CONFIG_SYS_SATA1_FLAGS		FLAGS_DMA
 #define CONFIG_SATA2
-#define CFG_SATA2		CFG_MPC85xx_SATA2_ADDR
-#define CFG_SATA2_FLAGS		FLAGS_DMA
+#define CONFIG_SYS_SATA2		CONFIG_SYS_MPC85xx_SATA2_ADDR
+#define CONFIG_SYS_SATA2_FLAGS		FLAGS_DMA
 
 #ifdef CONFIG_FSL_SATA
 #define CONFIG_LBA48
@@ -428,6 +464,9 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy);
 #define CONFIG_TSEC3	1
 #define CONFIG_TSEC3_NAME	"eTSEC3"
 
+#define CONFIG_FSL_SGMII_RISER	1
+#define SGMII_RISER_PHY_OFFSET	0x1c
+
 #define TSEC1_PHY_ADDR		1	/* TSEC1 -> PHY1 */
 #define TSEC3_PHY_ADDR		0	/* TSEC3 -> PHY0 */
 
@@ -446,17 +485,17 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy);
 /*
  * Environment
  */
-#define CFG_ENV_IS_IN_FLASH	1
-#if CFG_MONITOR_BASE > 0xfff80000
-#define CFG_ENV_ADDR		0xfff80000
+#define CONFIG_ENV_IS_IN_FLASH	1
+#if CONFIG_SYS_MONITOR_BASE > 0xfff80000
+#define CONFIG_ENV_ADDR		0xfff80000
 #else
-#define CFG_ENV_ADDR		(CFG_MONITOR_BASE + 0x60000)
+#define CONFIG_ENV_ADDR		(CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
 #endif
-#define CFG_ENV_SIZE		0x2000
-#define CFG_ENV_SECT_SIZE	0x20000 /* 128K (one sector) */
+#define CONFIG_ENV_SIZE		0x2000
+#define CONFIG_ENV_SECT_SIZE	0x20000 /* 128K (one sector) */
 
 #define CONFIG_LOADS_ECHO	1	/* echo on for serial download */
-#define CFG_LOADS_BAUD_CHANGE	1	/* allow baudrate change */
+#define CONFIG_SYS_LOADS_BAUD_CHANGE	1	/* allow baudrate change */
 
 /*
  * Command line configuration.
@@ -468,6 +507,8 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy);
 #define CONFIG_CMD_I2C
 #define CONFIG_CMD_MII
 #define CONFIG_CMD_ELF
+#define CONFIG_CMD_IRQ
+#define CONFIG_CMD_SETEXPR
 
 #if defined(CONFIG_PCI)
 #define CONFIG_CMD_PCI
@@ -480,26 +521,26 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy);
 /*
  * Miscellaneous configurable options
  */
-#define CFG_LONGHELP			/* undef to save memory	*/
+#define CONFIG_SYS_LONGHELP			/* undef to save memory	*/
 #define CONFIG_CMDLINE_EDITING		/* Command-line editing */
-#define CFG_LOAD_ADDR	0x2000000	/* default load address */
-#define CFG_PROMPT	"=> "		/* Monitor Command Prompt */
+#define CONFIG_SYS_LOAD_ADDR	0x2000000	/* default load address */
+#define CONFIG_SYS_PROMPT	"=> "		/* Monitor Command Prompt */
 #if defined(CONFIG_CMD_KGDB)
-#define CFG_CBSIZE	1024		/* Console I/O Buffer Size */
+#define CONFIG_SYS_CBSIZE	1024		/* Console I/O Buffer Size */
 #else
-#define CFG_CBSIZE	256		/* Console I/O Buffer Size */
+#define CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size */
 #endif
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define CFG_MAXARGS	16		/* max number of command args */
-#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size */
-#define CFG_HZ		1000		/* decrementer freq: 1ms ticks */
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS	16		/* max number of command args */
+#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size */
+#define CONFIG_SYS_HZ		1000		/* decrementer freq: 1ms ticks */
 
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define CFG_BOOTMAPSZ	(8 << 20)	/* Initial Memory map for Linux*/
+#define CONFIG_SYS_BOOTMAPSZ	(8 << 20)	/* Initial Memory map for Linux*/
 
 /*
  * Internal Definitions
diff --git a/include/configs/MPC8540ADS.h b/include/configs/MPC8540ADS.h
index 74f860536..f22b7529d 100644
--- a/include/configs/MPC8540ADS.h
+++ b/include/configs/MPC8540ADS.h
@@ -46,6 +46,7 @@
 #endif
 
 #define CONFIG_PCI
+#define CONFIG_SYS_PCI_64BIT	1	/* enable 64-bit PCI resources */
 #define CONFIG_TSEC_ENET		/* tsec ethernet support */
 #define CONFIG_ENV_OVERWRITE
 #define CONFIG_FSL_LAW		1	/* Use common FSL init code */
@@ -78,20 +79,19 @@
  */
 #define CONFIG_L2_CACHE			/* toggle L2 cache */
 #define CONFIG_BTB			/* toggle branch predition */
-#define CONFIG_ADDR_STREAMING		/* toggle addr streaming */
 
-#define CFG_MEMTEST_START	0x00200000	/* memtest region */
-#define CFG_MEMTEST_END		0x00400000
+#define CONFIG_SYS_MEMTEST_START	0x00200000	/* memtest region */
+#define CONFIG_SYS_MEMTEST_END		0x00400000
 
 
 /*
  * Base addresses -- Note these are effective addresses where the
  * actual resources get mapped (not physical addresses)
  */
-#define CFG_CCSRBAR_DEFAULT	0xff700000	/* CCSRBAR Default */
-#define CFG_CCSRBAR		0xe0000000	/* relocated CCSRBAR */
-#define CFG_CCSRBAR_PHYS	CFG_CCSRBAR	/* physical addr of CCSRBAR */
-#define CFG_IMMR		CFG_CCSRBAR	/* PQII uses CFG_IMMR */
+#define CONFIG_SYS_CCSRBAR_DEFAULT	0xff700000	/* CCSRBAR Default */
+#define CONFIG_SYS_CCSRBAR		0xe0000000	/* relocated CCSRBAR */
+#define CONFIG_SYS_CCSRBAR_PHYS	CONFIG_SYS_CCSRBAR	/* physical addr of CCSRBAR */
+#define CONFIG_SYS_IMMR		CONFIG_SYS_CCSRBAR	/* PQII uses CONFIG_SYS_IMMR */
 
 /* DDR Setup */
 #define CONFIG_FSL_DDR1
@@ -101,8 +101,8 @@
 
 #define CONFIG_MEM_INIT_VALUE		0xDeadBeef
 
-#define CFG_DDR_SDRAM_BASE	0x00000000	/* DDR is system memory*/
-#define CFG_SDRAM_BASE		CFG_DDR_SDRAM_BASE
+#define CONFIG_SYS_DDR_SDRAM_BASE	0x00000000	/* DDR is system memory*/
+#define CONFIG_SYS_SDRAM_BASE		CONFIG_SYS_DDR_SDRAM_BASE
 
 #define CONFIG_NUM_DDR_CONTROLLERS	1
 #define CONFIG_DIMM_SLOTS_PER_CTLR	1
@@ -112,42 +112,42 @@
 #define SPD_EEPROM_ADDRESS	0x51	/* CTLR 0 DIMM 0 */
 
 /* These are used when DDR doesn't use SPD. */
-#define CFG_SDRAM_SIZE	128		/* DDR is 128MB */
-#define CFG_DDR_CS0_BNDS	0x00000007	/* 0-128MB */
-#define CFG_DDR_CS0_CONFIG	0x80000002
-#define CFG_DDR_TIMING_1	0x37344321
-#define CFG_DDR_TIMING_2	0x00000800	/* P9-45,may need tuning */
-#define CFG_DDR_CONTROL		0xc2000000	/* unbuffered,no DYN_PWR */
-#define CFG_DDR_MODE		0x00000062	/* DLL,normal,seq,4/2.5 */
-#define CFG_DDR_INTERVAL	0x05200100	/* autocharge,no open page */
+#define CONFIG_SYS_SDRAM_SIZE	128		/* DDR is 128MB */
+#define CONFIG_SYS_DDR_CS0_BNDS	0x00000007	/* 0-128MB */
+#define CONFIG_SYS_DDR_CS0_CONFIG	0x80000002
+#define CONFIG_SYS_DDR_TIMING_1	0x37344321
+#define CONFIG_SYS_DDR_TIMING_2	0x00000800	/* P9-45,may need tuning */
+#define CONFIG_SYS_DDR_CONTROL		0xc2000000	/* unbuffered,no DYN_PWR */
+#define CONFIG_SYS_DDR_MODE		0x00000062	/* DLL,normal,seq,4/2.5 */
+#define CONFIG_SYS_DDR_INTERVAL	0x05200100	/* autocharge,no open page */
 
 /*
  * SDRAM on the Local Bus
  */
-#define CFG_LBC_SDRAM_BASE	0xf0000000	/* Localbus SDRAM */
-#define CFG_LBC_SDRAM_SIZE	64		/* LBC SDRAM is 64MB */
+#define CONFIG_SYS_LBC_SDRAM_BASE	0xf0000000	/* Localbus SDRAM */
+#define CONFIG_SYS_LBC_SDRAM_SIZE	64		/* LBC SDRAM is 64MB */
 
-#define CFG_FLASH_BASE		0xff000000	/* start of FLASH 16M */
-#define CFG_BR0_PRELIM		0xff001801	/* port size 32bit */
+#define CONFIG_SYS_FLASH_BASE		0xff000000	/* start of FLASH 16M */
+#define CONFIG_SYS_BR0_PRELIM		0xff001801	/* port size 32bit */
 
-#define CFG_OR0_PRELIM		0xff006ff7	/* 16MB Flash */
-#define CFG_MAX_FLASH_BANKS	1		/* number of banks */
-#define CFG_MAX_FLASH_SECT	64		/* sectors per device */
-#undef	CFG_FLASH_CHECKSUM
-#define CFG_FLASH_ERASE_TOUT	60000	/* Flash Erase Timeout (ms) */
-#define CFG_FLASH_WRITE_TOUT	500	/* Flash Write Timeout (ms) */
+#define CONFIG_SYS_OR0_PRELIM		0xff006ff7	/* 16MB Flash */
+#define CONFIG_SYS_MAX_FLASH_BANKS	1		/* number of banks */
+#define CONFIG_SYS_MAX_FLASH_SECT	64		/* sectors per device */
+#undef	CONFIG_SYS_FLASH_CHECKSUM
+#define CONFIG_SYS_FLASH_ERASE_TOUT	60000	/* Flash Erase Timeout (ms) */
+#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Flash Write Timeout (ms) */
 
-#define CFG_MONITOR_BASE	TEXT_BASE	/* start of monitor */
+#define CONFIG_SYS_MONITOR_BASE	TEXT_BASE	/* start of monitor */
 
-#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
-#define CFG_RAMBOOT
+#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
+#define CONFIG_SYS_RAMBOOT
 #else
-#undef  CFG_RAMBOOT
+#undef  CONFIG_SYS_RAMBOOT
 #endif
 
 #define CONFIG_FLASH_CFI_DRIVER
-#define CFG_FLASH_CFI
-#define CFG_FLASH_EMPTY_INFO
+#define CONFIG_SYS_FLASH_CFI
+#define CONFIG_SYS_FLASH_EMPTY_INFO
 
 #undef CONFIG_CLOCKS_IN_MHZ
 
@@ -158,7 +158,7 @@
 
 /*
  * Base Register 2 and Option Register 2 configure SDRAM.
- * The SDRAM base address, CFG_LBC_SDRAM_BASE, is 0xf0000000.
+ * The SDRAM base address, CONFIG_SYS_LBC_SDRAM_BASE, is 0xf0000000.
  *
  * For BR2, need:
  *    Base address of 0xf0000000 = BR[0:16] = 1111 0000 0000 0000 0
@@ -170,14 +170,14 @@
  * 0    4    8    12   16   20   24   28
  * 1111 0000 0000 0000 0001 1000 0110 0001 = f0001861
  *
- * FIXME: CFG_LBC_SDRAM_BASE should be masked and OR'ed into
+ * FIXME: CONFIG_SYS_LBC_SDRAM_BASE should be masked and OR'ed into
  * FIXME: the top 17 bits of BR2.
  */
 
-#define CFG_BR2_PRELIM		0xf0001861
+#define CONFIG_SYS_BR2_PRELIM		0xf0001861
 
 /*
- * The SDRAM size in MB, CFG_LBC_SDRAM_SIZE, is 64.
+ * The SDRAM size in MB, CONFIG_SYS_LBC_SDRAM_SIZE, is 64.
  *
  * For OR2, need:
  *    64MB mask for AM, OR2[0:7] = 1111 1100
@@ -190,103 +190,102 @@
  * 1111 1100 0000 0000 0110 1001 0000 0001 = fc006901
  */
 
-#define CFG_OR2_PRELIM		0xfc006901
+#define CONFIG_SYS_OR2_PRELIM		0xfc006901
 
-#define CFG_LBC_LCRR		0x00030004    /* LB clock ratio reg */
-#define CFG_LBC_LBCR		0x00000000    /* LB config reg */
-#define CFG_LBC_LSRT		0x20000000    /* LB sdram refresh timer */
-#define CFG_LBC_MRTPR		0x20000000    /* LB refresh timer prescal*/
+#define CONFIG_SYS_LBC_LCRR		0x00030004    /* LB clock ratio reg */
+#define CONFIG_SYS_LBC_LBCR		0x00000000    /* LB config reg */
+#define CONFIG_SYS_LBC_LSRT		0x20000000    /* LB sdram refresh timer */
+#define CONFIG_SYS_LBC_MRTPR		0x20000000    /* LB refresh timer prescal*/
 
 /*
  * LSDMR masks
  */
-#define CFG_LBC_LSDMR_RFEN	(1 << (31 -  1))
-#define CFG_LBC_LSDMR_BSMA1516	(3 << (31 - 10))
-#define CFG_LBC_LSDMR_BSMA1617	(4 << (31 - 10))
-#define CFG_LBC_LSDMR_RFCR5	(3 << (31 - 16))
-#define CFG_LBC_LSDMR_RFCR16	(7 << (31 - 16))
-#define CFG_LBC_LSDMR_PRETOACT3	(3 << (31 - 19))
-#define CFG_LBC_LSDMR_PRETOACT7	(7 << (31 - 19))
-#define CFG_LBC_LSDMR_ACTTORW3	(3 << (31 - 22))
-#define CFG_LBC_LSDMR_ACTTORW7	(7 << (31 - 22))
-#define CFG_LBC_LSDMR_ACTTORW6	(6 << (31 - 22))
-#define CFG_LBC_LSDMR_BL8	(1 << (31 - 23))
-#define CFG_LBC_LSDMR_WRC2	(2 << (31 - 27))
-#define CFG_LBC_LSDMR_WRC4	(0 << (31 - 27))
-#define CFG_LBC_LSDMR_BUFCMD	(1 << (31 - 29))
-#define CFG_LBC_LSDMR_CL3	(3 << (31 - 31))
-
-#define CFG_LBC_LSDMR_OP_NORMAL	(0 << (31 - 4))
-#define CFG_LBC_LSDMR_OP_ARFRSH	(1 << (31 - 4))
-#define CFG_LBC_LSDMR_OP_SRFRSH	(2 << (31 - 4))
-#define CFG_LBC_LSDMR_OP_MRW	(3 << (31 - 4))
-#define CFG_LBC_LSDMR_OP_PRECH	(4 << (31 - 4))
-#define CFG_LBC_LSDMR_OP_PCHALL	(5 << (31 - 4))
-#define CFG_LBC_LSDMR_OP_ACTBNK	(6 << (31 - 4))
-#define CFG_LBC_LSDMR_OP_RWINV	(7 << (31 - 4))
-
-#define CFG_LBC_LSDMR_COMMON	( CFG_LBC_LSDMR_BSMA1516	\
-				| CFG_LBC_LSDMR_RFCR5		\
-				| CFG_LBC_LSDMR_PRETOACT3	\
-				| CFG_LBC_LSDMR_ACTTORW3	\
-				| CFG_LBC_LSDMR_BL8		\
-				| CFG_LBC_LSDMR_WRC2		\
-				| CFG_LBC_LSDMR_CL3		\
-				| CFG_LBC_LSDMR_RFEN		\
+#define CONFIG_SYS_LBC_LSDMR_RFEN	(1 << (31 -  1))
+#define CONFIG_SYS_LBC_LSDMR_BSMA1516	(3 << (31 - 10))
+#define CONFIG_SYS_LBC_LSDMR_BSMA1617	(4 << (31 - 10))
+#define CONFIG_SYS_LBC_LSDMR_RFCR5	(3 << (31 - 16))
+#define CONFIG_SYS_LBC_LSDMR_RFCR16	(7 << (31 - 16))
+#define CONFIG_SYS_LBC_LSDMR_PRETOACT3	(3 << (31 - 19))
+#define CONFIG_SYS_LBC_LSDMR_PRETOACT7	(7 << (31 - 19))
+#define CONFIG_SYS_LBC_LSDMR_ACTTORW3	(3 << (31 - 22))
+#define CONFIG_SYS_LBC_LSDMR_ACTTORW7	(7 << (31 - 22))
+#define CONFIG_SYS_LBC_LSDMR_ACTTORW6	(6 << (31 - 22))
+#define CONFIG_SYS_LBC_LSDMR_BL8	(1 << (31 - 23))
+#define CONFIG_SYS_LBC_LSDMR_WRC2	(2 << (31 - 27))
+#define CONFIG_SYS_LBC_LSDMR_WRC4	(0 << (31 - 27))
+#define CONFIG_SYS_LBC_LSDMR_BUFCMD	(1 << (31 - 29))
+#define CONFIG_SYS_LBC_LSDMR_CL3	(3 << (31 - 31))
+
+#define CONFIG_SYS_LBC_LSDMR_OP_NORMAL	(0 << (31 - 4))
+#define CONFIG_SYS_LBC_LSDMR_OP_ARFRSH	(1 << (31 - 4))
+#define CONFIG_SYS_LBC_LSDMR_OP_SRFRSH	(2 << (31 - 4))
+#define CONFIG_SYS_LBC_LSDMR_OP_MRW	(3 << (31 - 4))
+#define CONFIG_SYS_LBC_LSDMR_OP_PRECH	(4 << (31 - 4))
+#define CONFIG_SYS_LBC_LSDMR_OP_PCHALL	(5 << (31 - 4))
+#define CONFIG_SYS_LBC_LSDMR_OP_ACTBNK	(6 << (31 - 4))
+#define CONFIG_SYS_LBC_LSDMR_OP_RWINV	(7 << (31 - 4))
+
+#define CONFIG_SYS_LBC_LSDMR_COMMON	( CONFIG_SYS_LBC_LSDMR_BSMA1516	\
+				| CONFIG_SYS_LBC_LSDMR_RFCR5		\
+				| CONFIG_SYS_LBC_LSDMR_PRETOACT3	\
+				| CONFIG_SYS_LBC_LSDMR_ACTTORW3	\
+				| CONFIG_SYS_LBC_LSDMR_BL8		\
+				| CONFIG_SYS_LBC_LSDMR_WRC2		\
+				| CONFIG_SYS_LBC_LSDMR_CL3		\
+				| CONFIG_SYS_LBC_LSDMR_RFEN		\
 				)
 
 /*
  * SDRAM Controller configuration sequence.
  */
-#define CFG_LBC_LSDMR_1		( CFG_LBC_LSDMR_COMMON \
-				| CFG_LBC_LSDMR_OP_PCHALL)
-#define CFG_LBC_LSDMR_2		( CFG_LBC_LSDMR_COMMON \
-				| CFG_LBC_LSDMR_OP_ARFRSH)
-#define CFG_LBC_LSDMR_3		( CFG_LBC_LSDMR_COMMON \
-				| CFG_LBC_LSDMR_OP_ARFRSH)
-#define CFG_LBC_LSDMR_4		( CFG_LBC_LSDMR_COMMON \
-				| CFG_LBC_LSDMR_OP_MRW)
-#define CFG_LBC_LSDMR_5		( CFG_LBC_LSDMR_COMMON \
-				| CFG_LBC_LSDMR_OP_NORMAL)
+#define CONFIG_SYS_LBC_LSDMR_1		( CONFIG_SYS_LBC_LSDMR_COMMON \
+				| CONFIG_SYS_LBC_LSDMR_OP_PCHALL)
+#define CONFIG_SYS_LBC_LSDMR_2		( CONFIG_SYS_LBC_LSDMR_COMMON \
+				| CONFIG_SYS_LBC_LSDMR_OP_ARFRSH)
+#define CONFIG_SYS_LBC_LSDMR_3		( CONFIG_SYS_LBC_LSDMR_COMMON \
+				| CONFIG_SYS_LBC_LSDMR_OP_ARFRSH)
+#define CONFIG_SYS_LBC_LSDMR_4		( CONFIG_SYS_LBC_LSDMR_COMMON \
+				| CONFIG_SYS_LBC_LSDMR_OP_MRW)
+#define CONFIG_SYS_LBC_LSDMR_5		( CONFIG_SYS_LBC_LSDMR_COMMON \
+				| CONFIG_SYS_LBC_LSDMR_OP_NORMAL)
 
 
 /*
  * 32KB, 8-bit wide for ADS config reg
  */
-#define CFG_BR4_PRELIM          0xf8000801
-#define CFG_OR4_PRELIM		0xffffe1f1
-#define CFG_BCSR		(CFG_BR4_PRELIM & 0xffff8000)
+#define CONFIG_SYS_BR4_PRELIM          0xf8000801
+#define CONFIG_SYS_OR4_PRELIM		0xffffe1f1
+#define CONFIG_SYS_BCSR		(CONFIG_SYS_BR4_PRELIM & 0xffff8000)
 
-#define CONFIG_L1_INIT_RAM
-#define CFG_INIT_RAM_LOCK	1
-#define CFG_INIT_RAM_ADDR	0xe4010000	/* Initial RAM address */
-#define CFG_INIT_RAM_END	0x4000		/* End of used area in RAM */
+#define CONFIG_SYS_INIT_RAM_LOCK	1
+#define CONFIG_SYS_INIT_RAM_ADDR	0xe4010000	/* Initial RAM address */
+#define CONFIG_SYS_INIT_RAM_END	0x4000		/* End of used area in RAM */
 
-#define CFG_GBL_DATA_SIZE	128		/* num bytes initial data */
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_GBL_DATA_SIZE	128		/* num bytes initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
-#define CFG_MONITOR_LEN		(256 * 1024)    /* Reserve 256 kB for Mon */
-#define CFG_MALLOC_LEN		(128 * 1024)    /* Reserved for malloc */
+#define CONFIG_SYS_MONITOR_LEN		(256 * 1024)    /* Reserve 256 kB for Mon */
+#define CONFIG_SYS_MALLOC_LEN		(128 * 1024)    /* Reserved for malloc */
 
 /* Serial Port */
 #define CONFIG_CONS_INDEX     1
 #undef	CONFIG_SERIAL_SOFTWARE_FIFO
-#define CFG_NS16550
-#define CFG_NS16550_SERIAL
-#define CFG_NS16550_REG_SIZE    1
-#define CFG_NS16550_CLK		get_bus_freq(0)
+#define CONFIG_SYS_NS16550
+#define CONFIG_SYS_NS16550_SERIAL
+#define CONFIG_SYS_NS16550_REG_SIZE    1
+#define CONFIG_SYS_NS16550_CLK		get_bus_freq(0)
 
-#define CFG_BAUDRATE_TABLE  \
+#define CONFIG_SYS_BAUDRATE_TABLE  \
 	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200}
 
-#define CFG_NS16550_COM1        (CFG_CCSRBAR+0x4500)
-#define CFG_NS16550_COM2        (CFG_CCSRBAR+0x4600)
+#define CONFIG_SYS_NS16550_COM1        (CONFIG_SYS_CCSRBAR+0x4500)
+#define CONFIG_SYS_NS16550_COM2        (CONFIG_SYS_CCSRBAR+0x4600)
 
 /* Use the HUSH parser */
-#define CFG_HUSH_PARSER
-#ifdef  CFG_HUSH_PARSER
-#define CFG_PROMPT_HUSH_PS2 "> "
+#define CONFIG_SYS_HUSH_PARSER
+#ifdef  CONFIG_SYS_HUSH_PARSER
+#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
 #endif
 
 /* pass open firmware flat tree */
@@ -294,8 +293,8 @@
 #define CONFIG_OF_BOARD_SETUP		1
 #define CONFIG_OF_STDOUT_VIA_ALIAS	1
 
-#define CFG_64BIT_VSPRINTF	1
-#define CFG_64BIT_STRTOUL	1
+#define CONFIG_SYS_64BIT_VSPRINTF	1
+#define CONFIG_SYS_64BIT_STRTOUL	1
 
 /*
  * I2C
@@ -303,26 +302,26 @@
 #define CONFIG_FSL_I2C		/* Use FSL common I2C driver */
 #define CONFIG_HARD_I2C		/* I2C with hardware support*/
 #undef	CONFIG_SOFT_I2C			/* I2C bit-banged */
-#define CFG_I2C_SPEED		400000	/* I2C speed and slave address */
-#define CFG_I2C_SLAVE		0x7F
-#define CFG_I2C_NOPROBES        {0x69}	/* Don't probe these addrs */
-#define CFG_I2C_OFFSET		0x3000
+#define CONFIG_SYS_I2C_SPEED		400000	/* I2C speed and slave address */
+#define CONFIG_SYS_I2C_SLAVE		0x7F
+#define CONFIG_SYS_I2C_NOPROBES        {0x69}	/* Don't probe these addrs */
+#define CONFIG_SYS_I2C_OFFSET		0x3000
 
 /* RapidIO MMU */
-#define CFG_RIO_MEM_BASE	0xc0000000	/* base address */
-#define CFG_RIO_MEM_PHYS	CFG_RIO_MEM_BASE
-#define CFG_RIO_MEM_SIZE	0x20000000	/* 128M */
+#define CONFIG_SYS_RIO_MEM_BASE	0xc0000000	/* base address */
+#define CONFIG_SYS_RIO_MEM_PHYS	CONFIG_SYS_RIO_MEM_BASE
+#define CONFIG_SYS_RIO_MEM_SIZE	0x20000000	/* 128M */
 
 /*
  * General PCI
  * Memory space is mapped 1-1, but I/O space must start from 0.
  */
-#define CFG_PCI1_MEM_BASE	0x80000000
-#define CFG_PCI1_MEM_PHYS	CFG_PCI1_MEM_BASE
-#define CFG_PCI1_MEM_SIZE	0x20000000	/* 512M */
-#define CFG_PCI1_IO_BASE	0x00000000
-#define CFG_PCI1_IO_PHYS	0xe2000000
-#define CFG_PCI1_IO_SIZE	0x100000	/* 1M */
+#define CONFIG_SYS_PCI1_MEM_BASE	0x80000000
+#define CONFIG_SYS_PCI1_MEM_PHYS	CONFIG_SYS_PCI1_MEM_BASE
+#define CONFIG_SYS_PCI1_MEM_SIZE	0x20000000	/* 512M */
+#define CONFIG_SYS_PCI1_IO_BASE	0x00000000
+#define CONFIG_SYS_PCI1_IO_PHYS	0xe2000000
+#define CONFIG_SYS_PCI1_IO_SIZE	0x100000	/* 1M */
 
 #if defined(CONFIG_PCI)
 
@@ -339,7 +338,7 @@
 #endif
 
 #undef CONFIG_PCI_SCAN_SHOW		/* show pci devices on startup */
-#define CFG_PCI_SUBSYS_VENDORID 0x1057  /* Motorola */
+#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x1057  /* Motorola */
 
 #endif	/* CONFIG_PCI */
 
@@ -380,20 +379,20 @@
 /*
  * Environment
  */
-#ifndef CFG_RAMBOOT
-  #define CFG_ENV_IS_IN_FLASH	1
-  #define CFG_ENV_ADDR		(CFG_MONITOR_BASE + 0x40000)
-  #define CFG_ENV_SECT_SIZE	0x40000	/* 256K(one sector) for env */
-  #define CFG_ENV_SIZE		0x2000
+#ifndef CONFIG_SYS_RAMBOOT
+  #define CONFIG_ENV_IS_IN_FLASH	1
+  #define CONFIG_ENV_ADDR		(CONFIG_SYS_MONITOR_BASE + 0x40000)
+  #define CONFIG_ENV_SECT_SIZE	0x40000	/* 256K(one sector) for env */
+  #define CONFIG_ENV_SIZE		0x2000
 #else
-  #define CFG_NO_FLASH		1	/* Flash is not usable now */
-  #define CFG_ENV_IS_NOWHERE	1	/* Store ENV in memory only */
-  #define CFG_ENV_ADDR		(CFG_MONITOR_BASE - 0x1000)
-  #define CFG_ENV_SIZE		0x2000
+  #define CONFIG_SYS_NO_FLASH		1	/* Flash is not usable now */
+  #define CONFIG_ENV_IS_NOWHERE	1	/* Store ENV in memory only */
+  #define CONFIG_ENV_ADDR		(CONFIG_SYS_MONITOR_BASE - 0x1000)
+  #define CONFIG_ENV_SIZE		0x2000
 #endif
 
 #define CONFIG_LOADS_ECHO	1	/* echo on for serial download */
-#define CFG_LOADS_BAUD_CHANGE	1	/* allow baudrate change */
+#define CONFIG_SYS_LOADS_BAUD_CHANGE	1	/* allow baudrate change */
 
 
 /*
@@ -413,12 +412,14 @@
 #define CONFIG_CMD_PING
 #define CONFIG_CMD_I2C
 #define CONFIG_CMD_ELF
+#define CONFIG_CMD_IRQ
+#define CONFIG_CMD_SETEXPR
 
 #if defined(CONFIG_PCI)
     #define CONFIG_CMD_PCI
 #endif
 
-#if defined(CFG_RAMBOOT)
+#if defined(CONFIG_SYS_RAMBOOT)
     #undef CONFIG_CMD_ENV
     #undef CONFIG_CMD_LOADS
 #endif
@@ -429,28 +430,28 @@
 /*
  * Miscellaneous configurable options
  */
-#define CFG_LONGHELP			/* undef to save memory	*/
+#define CONFIG_SYS_LONGHELP			/* undef to save memory	*/
 #define CONFIG_CMDLINE_EDITING		/* Command-line editing */
-#define CFG_LOAD_ADDR	0x2000000	/* default load address */
-#define CFG_PROMPT	"=> "		/* Monitor Command Prompt */
+#define CONFIG_SYS_LOAD_ADDR	0x2000000	/* default load address */
+#define CONFIG_SYS_PROMPT	"=> "		/* Monitor Command Prompt */
 
 #if defined(CONFIG_CMD_KGDB)
-    #define CFG_CBSIZE	1024		/* Console I/O Buffer Size */
+    #define CONFIG_SYS_CBSIZE	1024		/* Console I/O Buffer Size */
 #else
-    #define CFG_CBSIZE	256		/* Console I/O Buffer Size */
+    #define CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size */
 #endif
 
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define CFG_MAXARGS	16		/* max number of command args */
-#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size */
-#define CFG_HZ		1000		/* decrementer freq: 1ms ticks */
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS	16		/* max number of command args */
+#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size */
+#define CONFIG_SYS_HZ		1000		/* decrementer freq: 1ms ticks */
 
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define CFG_BOOTMAPSZ	(8 << 20)	/* Initial Memory map for Linux*/
+#define CONFIG_SYS_BOOTMAPSZ	(8 << 20)	/* Initial Memory map for Linux*/
 
 /*
  * Internal Definitions
diff --git a/include/configs/MPC8540EVAL.h b/include/configs/MPC8540EVAL.h
index 1073e23bf..5ac1916cb 100644
--- a/include/configs/MPC8540EVAL.h
+++ b/include/configs/MPC8540EVAL.h
@@ -62,13 +62,12 @@
 /* below can be toggled for performance analysis. otherwise use default */
 #define CONFIG_L2_CACHE			    /* toggle L2 cache	*/
 #undef  CONFIG_BTB			    /* toggle branch predition */
-#undef  CONFIG_ADDR_STREAMING		    /* toggle addr streaming   */
 
 #define CONFIG_BOARD_PRE_INIT	1	    /* Call board_pre_init	*/
 
-#undef	CFG_DRAM_TEST			    /* memory test, takes time  */
-#define CFG_MEMTEST_START	0x00200000	/* memtest works on	*/
-#define CFG_MEMTEST_END		0x00400000
+#undef	CONFIG_SYS_DRAM_TEST			    /* memory test, takes time  */
+#define CONFIG_SYS_MEMTEST_START	0x00200000	/* memtest works on	*/
+#define CONFIG_SYS_MEMTEST_END		0x00400000
 
 #if defined(CONFIG_PCI) && defined(CONFIG_TSEC_ENET)
 #error "You can only use either PCI Ethernet Card or TSEC Ethernet, not both."
@@ -78,42 +77,42 @@
  * Base addresses -- Note these are effective addresses where the
  * actual resources get mapped (not physical addresses)
  */
-#define CFG_CCSRBAR_DEFAULT	0xff700000	/* CCSRBAR Default	*/
-#define CFG_CCSRBAR		0xe0000000	/* relocated CCSRBAR	*/
-#define CFG_CCSRBAR_PHYS	CFG_CCSRBAR	/* physical addr of CCSRBAR */
-#define CFG_IMMR		CFG_CCSRBAR	/* PQII uses CFG_IMMR	*/
+#define CONFIG_SYS_CCSRBAR_DEFAULT	0xff700000	/* CCSRBAR Default	*/
+#define CONFIG_SYS_CCSRBAR		0xe0000000	/* relocated CCSRBAR	*/
+#define CONFIG_SYS_CCSRBAR_PHYS	CONFIG_SYS_CCSRBAR	/* physical addr of CCSRBAR */
+#define CONFIG_SYS_IMMR		CONFIG_SYS_CCSRBAR	/* PQII uses CONFIG_SYS_IMMR	*/
 
-#define CFG_SDRAM_SIZE		256             /* DDR is now 256MB     */
+#define CONFIG_SYS_SDRAM_SIZE		256             /* DDR is now 256MB     */
 
 #if defined(CONFIG_RAM_AS_FLASH)
-#define CFG_LBC_SDRAM_BASE	0xfc000000	/* Localbus SDRAM */
+#define CONFIG_SYS_LBC_SDRAM_BASE	0xfc000000	/* Localbus SDRAM */
 #else
-#define CFG_LBC_SDRAM_BASE      0xf0000000      /* Localbus SDRAM */
+#define CONFIG_SYS_LBC_SDRAM_BASE      0xf0000000      /* Localbus SDRAM */
 #endif
-#define CFG_LBC_SDRAM_SIZE	64		/* LBC SDRAM is 0MB	*/
+#define CONFIG_SYS_LBC_SDRAM_SIZE	64		/* LBC SDRAM is 0MB	*/
 
 #if defined(CONFIG_RAM_AS_FLASH)
-#define CFG_FLASH_BASE          0xf8000000      /* start of FLASH  16M  */
-#define CFG_BR0_PRELIM          0xf8001801      /* port size 32bit */
+#define CONFIG_SYS_FLASH_BASE          0xf8000000      /* start of FLASH  16M  */
+#define CONFIG_SYS_BR0_PRELIM          0xf8001801      /* port size 32bit */
 #else /* Boot from real Flash */
-#define CFG_FLASH_BASE		0xff800000	/* start of FLASH 8M    */
-#define CFG_BR0_PRELIM		0xff801001	/* port size 16bit	*/
+#define CONFIG_SYS_FLASH_BASE		0xff800000	/* start of FLASH 8M    */
+#define CONFIG_SYS_BR0_PRELIM		0xff801001	/* port size 16bit	*/
 #endif
 
-#define	CFG_OR0_PRELIM		0xff806f67	/* 8MB Flash		*/
-#define CFG_MAX_FLASH_BANKS	1		/* number of banks	*/
-#define CFG_MAX_FLASH_SECT	64		/* sectors per device   */
-#undef	CFG_FLASH_CHECKSUM
-#define CFG_FLASH_ERASE_TOUT	60000	/* Timeout for Flash Erase (in ms)*/
-#define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)*/
-#define CFG_FLASH_CFI		1
+#define	CONFIG_SYS_OR0_PRELIM		0xff806f67	/* 8MB Flash		*/
+#define CONFIG_SYS_MAX_FLASH_BANKS	1		/* number of banks	*/
+#define CONFIG_SYS_MAX_FLASH_SECT	64		/* sectors per device   */
+#undef	CONFIG_SYS_FLASH_CHECKSUM
+#define CONFIG_SYS_FLASH_ERASE_TOUT	60000	/* Timeout for Flash Erase (in ms)*/
+#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)*/
+#define CONFIG_SYS_FLASH_CFI		1
 
-#define CFG_MONITOR_BASE	TEXT_BASE	/* start of monitor */
+#define CONFIG_SYS_MONITOR_BASE	TEXT_BASE	/* start of monitor */
 
-#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
-#define CFG_RAMBOOT
+#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
+#define CONFIG_SYS_RAMBOOT
 #else
-#undef  CFG_RAMBOOT
+#undef  CONFIG_SYS_RAMBOOT
 #endif
 
 /* DDR Setup */
@@ -127,8 +126,8 @@
 #undef CONFIG_ECC_INIT_VIA_DDRCONTROLLER	/* DDR controller or DMA? */
 #define CONFIG_MEM_INIT_VALUE	0xDeadBeef
 
-#define CFG_DDR_SDRAM_BASE	0x00000000
-#define CFG_SDRAM_BASE		CFG_DDR_SDRAM_BASE
+#define CONFIG_SYS_DDR_SDRAM_BASE	0x00000000
+#define CONFIG_SYS_SDRAM_BASE		CONFIG_SYS_DDR_SDRAM_BASE
 #define CONFIG_VERY_BIG_RAM
 
 #define CONFIG_NUM_DDR_CONTROLLERS	1
@@ -141,57 +140,56 @@
 #undef CONFIG_CLOCKS_IN_MHZ
 
 /* local bus definitions */
-#define CFG_BR2_PRELIM		0xf0001861	/* 64MB localbus SDRAM  */
-#define CFG_OR2_PRELIM		0xfc006901
-#define CFG_LBC_LCRR		0x00030004	/* local bus freq divider*/
-#define CFG_LBC_LBCR		0x00000000
-#define CFG_LBC_LSRT		0x20000000
-#define CFG_LBC_MRTPR		0x20000000
-#define CFG_LBC_LSDMR_1		0x2861b723
-#define CFG_LBC_LSDMR_2		0x0861b723
-#define CFG_LBC_LSDMR_3		0x0861b723
-#define CFG_LBC_LSDMR_4		0x1861b723
-#define CFG_LBC_LSDMR_5		0x4061b723
+#define CONFIG_SYS_BR2_PRELIM		0xf0001861	/* 64MB localbus SDRAM  */
+#define CONFIG_SYS_OR2_PRELIM		0xfc006901
+#define CONFIG_SYS_LBC_LCRR		0x00030004	/* local bus freq divider*/
+#define CONFIG_SYS_LBC_LBCR		0x00000000
+#define CONFIG_SYS_LBC_LSRT		0x20000000
+#define CONFIG_SYS_LBC_MRTPR		0x20000000
+#define CONFIG_SYS_LBC_LSDMR_1		0x2861b723
+#define CONFIG_SYS_LBC_LSDMR_2		0x0861b723
+#define CONFIG_SYS_LBC_LSDMR_3		0x0861b723
+#define CONFIG_SYS_LBC_LSDMR_4		0x1861b723
+#define CONFIG_SYS_LBC_LSDMR_5		0x4061b723
 
 #if defined(CONFIG_RAM_AS_FLASH)
-#define CFG_BR4_PRELIM          0xf8000801      /* 32KB, 8-bit wide for ADS config reg */
+#define CONFIG_SYS_BR4_PRELIM          0xf8000801      /* 32KB, 8-bit wide for ADS config reg */
 #else
-#define CFG_BR4_PRELIM          0xf8000801      /* 32KB, 8-bit wide for ADS config reg */
+#define CONFIG_SYS_BR4_PRELIM          0xf8000801      /* 32KB, 8-bit wide for ADS config reg */
 #endif
-#define CFG_OR4_PRELIM          0xffffe1f1
-#define CFG_BCSR                (CFG_BR4_PRELIM & 0xffff8000)
+#define CONFIG_SYS_OR4_PRELIM          0xffffe1f1
+#define CONFIG_SYS_BCSR                (CONFIG_SYS_BR4_PRELIM & 0xffff8000)
 
-#define CONFIG_L1_INIT_RAM
-#define CFG_INIT_RAM_LOCK	1
-#define CFG_INIT_RAM_ADDR	0x40000000	/* Initial RAM address	*/
-#define CFG_INIT_RAM_END	0x4000		/* End of used area in RAM */
+#define CONFIG_SYS_INIT_RAM_LOCK	1
+#define CONFIG_SYS_INIT_RAM_ADDR	0x40000000	/* Initial RAM address	*/
+#define CONFIG_SYS_INIT_RAM_END	0x4000		/* End of used area in RAM */
 
-#define CFG_GBL_DATA_SIZE	128		/* num bytes initial data */
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_GBL_DATA_SIZE	128		/* num bytes initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
-#define CFG_MONITOR_LEN		(256 * 1024)    /* Reserve 256 kB for Mon */
-#define CFG_MALLOC_LEN		(128 * 1024)    /* Reserved for malloc */
+#define CONFIG_SYS_MONITOR_LEN		(256 * 1024)    /* Reserve 256 kB for Mon */
+#define CONFIG_SYS_MALLOC_LEN		(128 * 1024)    /* Reserved for malloc */
 
 /* Serial Port */
 #define CONFIG_CONS_INDEX     1
 #undef	CONFIG_SERIAL_SOFTWARE_FIFO
-#define CFG_NS16550
-#define CFG_NS16550_SERIAL
-#define CFG_NS16550_REG_SIZE    1
-#define CFG_NS16550_CLK		get_bus_freq(0)
+#define CONFIG_SYS_NS16550
+#define CONFIG_SYS_NS16550_SERIAL
+#define CONFIG_SYS_NS16550_REG_SIZE    1
+#define CONFIG_SYS_NS16550_CLK		get_bus_freq(0)
 #define CONFIG_BAUDRATE		115200
 
-#define CFG_BAUDRATE_TABLE  \
+#define CONFIG_SYS_BAUDRATE_TABLE  \
 	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200}
 
-#define CFG_NS16550_COM1        (CFG_CCSRBAR+0x4500)
-#define CFG_NS16550_COM2        (CFG_CCSRBAR+0x4600)
+#define CONFIG_SYS_NS16550_COM1        (CONFIG_SYS_CCSRBAR+0x4500)
+#define CONFIG_SYS_NS16550_COM2        (CONFIG_SYS_CCSRBAR+0x4600)
 
 /* Use the HUSH parser */
-#define CFG_HUSH_PARSER
-#ifdef  CFG_HUSH_PARSER
-#define CFG_PROMPT_HUSH_PS2 "> "
+#define CONFIG_SYS_HUSH_PARSER
+#ifdef  CONFIG_SYS_HUSH_PARSER
+#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
 #endif
 
 /*
@@ -200,16 +198,16 @@
 #define CONFIG_FSL_I2C		/* Use FSL common I2C driver */
 #define CONFIG_HARD_I2C		/* I2C with hardware support*/
 #undef	CONFIG_SOFT_I2C			/* I2C bit-banged		*/
-#define CFG_I2C_SPEED		400000	/* I2C speed and slave address	*/
-#define CFG_I2C_SLAVE		0x7F
-#define CFG_I2C_NOPROBES        {0x69}	/* Don't probe these addrs */
-#define CFG_I2C_OFFSET		0x3000
+#define CONFIG_SYS_I2C_SPEED		400000	/* I2C speed and slave address	*/
+#define CONFIG_SYS_I2C_SLAVE		0x7F
+#define CONFIG_SYS_I2C_NOPROBES        {0x69}	/* Don't probe these addrs */
+#define CONFIG_SYS_I2C_OFFSET		0x3000
 
 /* General PCI */
-#define CFG_PCI_MEM_BASE	0x80000000
-#define CFG_PCI_MEM_PHYS	0x80000000
-#define CFG_PCI_MEM_SIZE	0x20000000
-#define CFG_PCI_IO_BASE         0xe2000000
+#define CONFIG_SYS_PCI_MEM_BASE	0x80000000
+#define CONFIG_SYS_PCI_MEM_PHYS	0x80000000
+#define CONFIG_SYS_PCI_MEM_SIZE	0x20000000
+#define CONFIG_SYS_PCI_IO_BASE         0xe2000000
 
 #if defined(CONFIG_PCI)
 #define CONFIG_NET_MULTI
@@ -222,8 +220,8 @@
 #define PCI_IDSEL_NUMBER      0x0c	/*slot0->3(IDSEL)=12->15*/
 #endif
 #define CONFIG_PCI_SCAN_SHOW    1       /* show pci devices on startup  */
-#define CFG_PCI_SUBSYS_VENDORID 0x1057  /* Motorola */
-#define CFG_PCI_SUBSYS_DEVICEID 0x0008
+#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x1057  /* Motorola */
+#define CONFIG_SYS_PCI_SUBSYS_DEVICEID 0x0008
 #elif defined(CONFIG_TSEC_ENET)
 #define CONFIG_NET_MULTI	1
 #define CONFIG_MII		1	/* MII PHY management	*/
@@ -254,22 +252,22 @@
 #endif
 
 /* Environment */
-#ifndef CFG_RAMBOOT
+#ifndef CONFIG_SYS_RAMBOOT
 #if defined(CONFIG_RAM_AS_FLASH)
-#define CFG_ENV_IS_NOWHERE
-#define CFG_ENV_ADDR		(CFG_FLASH_BASE + 0x100000)
-#define CFG_ENV_SIZE		0x2000
+#define CONFIG_ENV_IS_NOWHERE
+#define CONFIG_ENV_ADDR		(CONFIG_SYS_FLASH_BASE + 0x100000)
+#define CONFIG_ENV_SIZE		0x2000
 #else
-#define CFG_ENV_IS_IN_FLASH	1
-#define CFG_ENV_ADDR		(CFG_MONITOR_BASE + 0x40000)
-#define CFG_ENV_SECT_SIZE	0x40000	/* 256K(one sector) for env */
+#define CONFIG_ENV_IS_IN_FLASH	1
+#define CONFIG_ENV_ADDR		(CONFIG_SYS_MONITOR_BASE + 0x40000)
+#define CONFIG_ENV_SECT_SIZE	0x40000	/* 256K(one sector) for env */
 #endif
-#define CFG_ENV_SIZE		0x2000
+#define CONFIG_ENV_SIZE		0x2000
 #else
-/* #define CFG_NO_FLASH		1 */	/* Flash is not usable now	*/
-#define CFG_ENV_IS_NOWHERE	1	/* Store ENV in memory only	*/
-#define CFG_ENV_ADDR		(CFG_MONITOR_BASE - 0x1000)
-#define CFG_ENV_SIZE		0x2000
+/* #define CONFIG_SYS_NO_FLASH		1 */	/* Flash is not usable now	*/
+#define CONFIG_ENV_IS_NOWHERE	1	/* Store ENV in memory only	*/
+#define CONFIG_ENV_ADDR		(CONFIG_SYS_MONITOR_BASE - 0x1000)
+#define CONFIG_ENV_SIZE		0x2000
 #endif
 
 #define CONFIG_BOOTARGS	"root=/dev/ram rw console=ttyS0,115200"
@@ -277,7 +275,7 @@
 #define CONFIG_BOOTDELAY	3	/* -1 disable autoboot */
 
 #define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
-#define CFG_LOADS_BAUD_CHANGE	1	/* allow baudrate change	*/
+#define CONFIG_SYS_LOADS_BAUD_CHANGE	1	/* allow baudrate change	*/
 
 
 /*
@@ -301,7 +299,7 @@
     #define CONFIG_CMD_PCI
 #endif
 
-#if defined(CFG_RAMBOOT) || defined(CONFIG_RAM_AS_FLASH)
+#if defined(CONFIG_SYS_RAMBOOT) || defined(CONFIG_RAM_AS_FLASH)
     #undef CONFIG_CMD_ENV
     #undef CONFIG_CMD_LOADS
 #endif
@@ -312,25 +310,25 @@
 /*
  * Miscellaneous configurable options
  */
-#define CFG_LONGHELP			/* undef to save memory		*/
-#define CFG_LOAD_ADDR   0x2000000       /* default load address */
-#define CFG_PROMPT	"MPC8540EVAL=> "/* Monitor Command Prompt	*/
+#define CONFIG_SYS_LONGHELP			/* undef to save memory		*/
+#define CONFIG_SYS_LOAD_ADDR   0x2000000       /* default load address */
+#define CONFIG_SYS_PROMPT	"MPC8540EVAL=> "/* Monitor Command Prompt	*/
 #if defined(CONFIG_CMD_KGDB)
-#define CFG_CBSIZE	1024		/* Console I/O Buffer Size	*/
+#define CONFIG_SYS_CBSIZE	1024		/* Console I/O Buffer Size	*/
 #else
-#define CFG_CBSIZE	256		/* Console I/O Buffer Size	*/
+#define CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size	*/
 #endif
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define CFG_MAXARGS	16		/* max number of command args	*/
-#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size	*/
-#define CFG_HZ		1000		/* decrementer freq: 1 ms ticks */
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS	16		/* max number of command args	*/
+#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
+#define CONFIG_SYS_HZ		1000		/* decrementer freq: 1 ms ticks */
 
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define CFG_BOOTMAPSZ	(8 << 20)	/* Initial Memory map for Linux */
+#define CONFIG_SYS_BOOTMAPSZ	(8 << 20)	/* Initial Memory map for Linux */
 
 /*
  * Internal Definitions
diff --git a/include/configs/MPC8541CDS.h b/include/configs/MPC8541CDS.h
index 29dff32ea..399189c59 100644
--- a/include/configs/MPC8541CDS.h
+++ b/include/configs/MPC8541CDS.h
@@ -38,13 +38,13 @@
 #define CONFIG_MPC8541CDS	1	/* MPC8541CDS board specific */
 
 #define CONFIG_PCI
+#define CONFIG_SYS_PCI_64BIT	1	/* enable 64-bit PCI resources */
 #define CONFIG_TSEC_ENET		/* tsec ethernet support */
 #define CONFIG_ENV_OVERWRITE
 
 #define CONFIG_FSL_LAW		1	/* Use common FSL init code */
 
 #define CONFIG_FSL_VIA
-#define CONFIG_FSL_CDS_EEPROM
 
 /*
  * When initializing flash, if we cannot find the manufacturer ID,
@@ -63,19 +63,18 @@ extern unsigned long get_clock_freq(void);
  */
 #define CONFIG_L2_CACHE			    /* toggle L2 cache	*/
 #define CONFIG_BTB			    /* toggle branch predition */
-#define CONFIG_ADDR_STREAMING		    /* toggle addr streaming   */
 
-#define CFG_MEMTEST_START	0x00200000	/* memtest works on */
-#define CFG_MEMTEST_END		0x00400000
+#define CONFIG_SYS_MEMTEST_START	0x00200000	/* memtest works on */
+#define CONFIG_SYS_MEMTEST_END		0x00400000
 
 /*
  * Base addresses -- Note these are effective addresses where the
  * actual resources get mapped (not physical addresses)
  */
-#define CFG_CCSRBAR_DEFAULT	0xff700000	/* CCSRBAR Default */
-#define CFG_CCSRBAR		0xe0000000	/* relocated CCSRBAR */
-#define CFG_CCSRBAR_PHYS	CFG_CCSRBAR	/* physical addr of CCSRBAR */
-#define CFG_IMMR		CFG_CCSRBAR	/* PQII uses CFG_IMMR */
+#define CONFIG_SYS_CCSRBAR_DEFAULT	0xff700000	/* CCSRBAR Default */
+#define CONFIG_SYS_CCSRBAR		0xe0000000	/* relocated CCSRBAR */
+#define CONFIG_SYS_CCSRBAR_PHYS	CONFIG_SYS_CCSRBAR	/* physical addr of CCSRBAR */
+#define CONFIG_SYS_IMMR		CONFIG_SYS_CCSRBAR	/* PQII uses CONFIG_SYS_IMMR */
 
 /* DDR Setup */
 #define CONFIG_FSL_DDR1
@@ -85,8 +84,8 @@ extern unsigned long get_clock_freq(void);
 
 #define CONFIG_MEM_INIT_VALUE		0xDeadBeef
 
-#define CFG_DDR_SDRAM_BASE	0x00000000	/* DDR is system memory*/
-#define CFG_SDRAM_BASE		CFG_DDR_SDRAM_BASE
+#define CONFIG_SYS_DDR_SDRAM_BASE	0x00000000	/* DDR is system memory*/
+#define CONFIG_SYS_SDRAM_BASE		CONFIG_SYS_DDR_SDRAM_BASE
 
 #define CONFIG_NUM_DDR_CONTROLLERS	1
 #define CONFIG_DIMM_SLOTS_PER_CTLR	1
@@ -138,37 +137,37 @@ extern unsigned long get_clock_freq(void);
  * 1111 1111 1000 0000 0110 1110 0110 0101 = ff806e65    ORx
  */
 
-#define CFG_FLASH_BASE		0xff000000	/* start of FLASH 8M */
+#define CONFIG_SYS_FLASH_BASE		0xff000000	/* start of FLASH 8M */
 
-#define CFG_BR0_PRELIM		0xff801001
-#define CFG_BR1_PRELIM		0xff001001
+#define CONFIG_SYS_BR0_PRELIM		0xff801001
+#define CONFIG_SYS_BR1_PRELIM		0xff001001
 
-#define	CFG_OR0_PRELIM		0xff806e65
-#define	CFG_OR1_PRELIM		0xff806e65
+#define	CONFIG_SYS_OR0_PRELIM		0xff806e65
+#define	CONFIG_SYS_OR1_PRELIM		0xff806e65
 
-#define CFG_FLASH_BANKS_LIST	{0xff800000, CFG_FLASH_BASE}
-#define CFG_MAX_FLASH_BANKS	2		/* number of banks */
-#define CFG_MAX_FLASH_SECT	128		/* sectors per device */
-#undef	CFG_FLASH_CHECKSUM
-#define CFG_FLASH_ERASE_TOUT	60000	/* Flash Erase Timeout (ms) */
-#define CFG_FLASH_WRITE_TOUT	500	/* Flash Write Timeout (ms) */
+#define CONFIG_SYS_FLASH_BANKS_LIST	{0xff800000, CONFIG_SYS_FLASH_BASE}
+#define CONFIG_SYS_MAX_FLASH_BANKS	2		/* number of banks */
+#define CONFIG_SYS_MAX_FLASH_SECT	128		/* sectors per device */
+#undef	CONFIG_SYS_FLASH_CHECKSUM
+#define CONFIG_SYS_FLASH_ERASE_TOUT	60000	/* Flash Erase Timeout (ms) */
+#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Flash Write Timeout (ms) */
 
-#define CFG_MONITOR_BASE	TEXT_BASE	/* start of monitor */
+#define CONFIG_SYS_MONITOR_BASE	TEXT_BASE	/* start of monitor */
 
 #define CONFIG_FLASH_CFI_DRIVER
-#define CFG_FLASH_CFI
-#define CFG_FLASH_EMPTY_INFO
+#define CONFIG_SYS_FLASH_CFI
+#define CONFIG_SYS_FLASH_EMPTY_INFO
 
 
 /*
  * SDRAM on the Local Bus
  */
-#define CFG_LBC_SDRAM_BASE	0xf0000000	/* Localbus SDRAM */
-#define CFG_LBC_SDRAM_SIZE	64		/* LBC SDRAM is 64MB */
+#define CONFIG_SYS_LBC_SDRAM_BASE	0xf0000000	/* Localbus SDRAM */
+#define CONFIG_SYS_LBC_SDRAM_SIZE	64		/* LBC SDRAM is 64MB */
 
 /*
  * Base Register 2 and Option Register 2 configure SDRAM.
- * The SDRAM base address, CFG_LBC_SDRAM_BASE, is 0xf0000000.
+ * The SDRAM base address, CONFIG_SYS_LBC_SDRAM_BASE, is 0xf0000000.
  *
  * For BR2, need:
  *    Base address of 0xf0000000 = BR[0:16] = 1111 0000 0000 0000 0
@@ -180,14 +179,14 @@ extern unsigned long get_clock_freq(void);
  * 0    4    8    12   16   20   24   28
  * 1111 0000 0000 0000 0001 1000 0110 0001 = f0001861
  *
- * FIXME: CFG_LBC_SDRAM_BASE should be masked and OR'ed into
+ * FIXME: CONFIG_SYS_LBC_SDRAM_BASE should be masked and OR'ed into
  * FIXME: the top 17 bits of BR2.
  */
 
-#define CFG_BR2_PRELIM          0xf0001861
+#define CONFIG_SYS_BR2_PRELIM          0xf0001861
 
 /*
- * The SDRAM size in MB, CFG_LBC_SDRAM_SIZE, is 64.
+ * The SDRAM size in MB, CONFIG_SYS_LBC_SDRAM_SIZE, is 64.
  *
  * For OR2, need:
  *    64MB mask for AM, OR2[0:7] = 1111 1100
@@ -200,35 +199,35 @@ extern unsigned long get_clock_freq(void);
  * 1111 1100 0000 0000 0110 1001 0000 0001 = fc006901
  */
 
-#define CFG_OR2_PRELIM		0xfc006901
+#define CONFIG_SYS_OR2_PRELIM		0xfc006901
 
-#define CFG_LBC_LCRR		0x00030004    /* LB clock ratio reg */
-#define CFG_LBC_LBCR		0x00000000    /* LB config reg */
-#define CFG_LBC_LSRT		0x20000000  /* LB sdram refresh timer */
-#define CFG_LBC_MRTPR		0x00000000  /* LB refresh timer prescal*/
+#define CONFIG_SYS_LBC_LCRR		0x00030004    /* LB clock ratio reg */
+#define CONFIG_SYS_LBC_LBCR		0x00000000    /* LB config reg */
+#define CONFIG_SYS_LBC_LSRT		0x20000000  /* LB sdram refresh timer */
+#define CONFIG_SYS_LBC_MRTPR		0x00000000  /* LB refresh timer prescal*/
 
 /*
  * LSDMR masks
  */
-#define CFG_LBC_LSDMR_RFEN	(1 << (31 -  1))
-#define CFG_LBC_LSDMR_BSMA1516	(3 << (31 - 10))
-#define CFG_LBC_LSDMR_BSMA1617	(4 << (31 - 10))
-#define CFG_LBC_LSDMR_RFCR16	(7 << (31 - 16))
-#define CFG_LBC_LSDMR_PRETOACT7	(7 << (31 - 19))
-#define CFG_LBC_LSDMR_ACTTORW7	(7 << (31 - 22))
-#define CFG_LBC_LSDMR_ACTTORW6	(6 << (31 - 22))
-#define CFG_LBC_LSDMR_BL8	(1 << (31 - 23))
-#define CFG_LBC_LSDMR_WRC4	(0 << (31 - 27))
-#define CFG_LBC_LSDMR_CL3	(3 << (31 - 31))
-
-#define CFG_LBC_LSDMR_OP_NORMAL	(0 << (31 - 4))
-#define CFG_LBC_LSDMR_OP_ARFRSH	(1 << (31 - 4))
-#define CFG_LBC_LSDMR_OP_SRFRSH	(2 << (31 - 4))
-#define CFG_LBC_LSDMR_OP_MRW	(3 << (31 - 4))
-#define CFG_LBC_LSDMR_OP_PRECH	(4 << (31 - 4))
-#define CFG_LBC_LSDMR_OP_PCHALL	(5 << (31 - 4))
-#define CFG_LBC_LSDMR_OP_ACTBNK	(6 << (31 - 4))
-#define CFG_LBC_LSDMR_OP_RWINV	(7 << (31 - 4))
+#define CONFIG_SYS_LBC_LSDMR_RFEN	(1 << (31 -  1))
+#define CONFIG_SYS_LBC_LSDMR_BSMA1516	(3 << (31 - 10))
+#define CONFIG_SYS_LBC_LSDMR_BSMA1617	(4 << (31 - 10))
+#define CONFIG_SYS_LBC_LSDMR_RFCR16	(7 << (31 - 16))
+#define CONFIG_SYS_LBC_LSDMR_PRETOACT7	(7 << (31 - 19))
+#define CONFIG_SYS_LBC_LSDMR_ACTTORW7	(7 << (31 - 22))
+#define CONFIG_SYS_LBC_LSDMR_ACTTORW6	(6 << (31 - 22))
+#define CONFIG_SYS_LBC_LSDMR_BL8	(1 << (31 - 23))
+#define CONFIG_SYS_LBC_LSDMR_WRC4	(0 << (31 - 27))
+#define CONFIG_SYS_LBC_LSDMR_CL3	(3 << (31 - 31))
+
+#define CONFIG_SYS_LBC_LSDMR_OP_NORMAL	(0 << (31 - 4))
+#define CONFIG_SYS_LBC_LSDMR_OP_ARFRSH	(1 << (31 - 4))
+#define CONFIG_SYS_LBC_LSDMR_OP_SRFRSH	(2 << (31 - 4))
+#define CONFIG_SYS_LBC_LSDMR_OP_MRW	(3 << (31 - 4))
+#define CONFIG_SYS_LBC_LSDMR_OP_PRECH	(4 << (31 - 4))
+#define CONFIG_SYS_LBC_LSDMR_OP_PCHALL	(5 << (31 - 4))
+#define CONFIG_SYS_LBC_LSDMR_OP_ACTBNK	(6 << (31 - 4))
+#define CONFIG_SYS_LBC_LSDMR_OP_RWINV	(7 << (31 - 4))
 
 /*
  * Common settings for all Local Bus SDRAM commands.
@@ -236,13 +235,13 @@ extern unsigned long get_clock_freq(void);
  *                  or BSMA1617 (for CPU 1.0) (old)
  * is OR'ed in too.
  */
-#define CFG_LBC_LSDMR_COMMON	( CFG_LBC_LSDMR_RFCR16		\
-				| CFG_LBC_LSDMR_PRETOACT7	\
-				| CFG_LBC_LSDMR_ACTTORW7	\
-				| CFG_LBC_LSDMR_BL8		\
-				| CFG_LBC_LSDMR_WRC4		\
-				| CFG_LBC_LSDMR_CL3		\
-				| CFG_LBC_LSDMR_RFEN		\
+#define CONFIG_SYS_LBC_LSDMR_COMMON	( CONFIG_SYS_LBC_LSDMR_RFCR16		\
+				| CONFIG_SYS_LBC_LSDMR_PRETOACT7	\
+				| CONFIG_SYS_LBC_LSDMR_ACTTORW7	\
+				| CONFIG_SYS_LBC_LSDMR_BL8		\
+				| CONFIG_SYS_LBC_LSDMR_WRC4		\
+				| CONFIG_SYS_LBC_LSDMR_CL3		\
+				| CONFIG_SYS_LBC_LSDMR_RFEN		\
 				)
 
 /*
@@ -278,39 +277,38 @@ extern unsigned long get_clock_freq(void);
 #define CONFIG_FSL_CADMUS
 
 #define CADMUS_BASE_ADDR 0xf8000000
-#define CFG_BR3_PRELIM   0xf8000801
-#define CFG_OR3_PRELIM   0xfff00ff7
+#define CONFIG_SYS_BR3_PRELIM   0xf8000801
+#define CONFIG_SYS_OR3_PRELIM   0xfff00ff7
 
-#define CONFIG_L1_INIT_RAM
-#define CFG_INIT_RAM_LOCK	1
-#define CFG_INIT_RAM_ADDR	0xe4010000	/* Initial RAM address */
-#define CFG_INIT_RAM_END	0x4000	    /* End of used area in RAM */
+#define CONFIG_SYS_INIT_RAM_LOCK	1
+#define CONFIG_SYS_INIT_RAM_ADDR	0xe4010000	/* Initial RAM address */
+#define CONFIG_SYS_INIT_RAM_END	0x4000	    /* End of used area in RAM */
 
-#define CFG_GBL_DATA_SIZE	128	    /* num bytes initial data */
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_GBL_DATA_SIZE	128	    /* num bytes initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
-#define CFG_MONITOR_LEN		(256 * 1024) /* Reserve 256 kB for Mon */
-#define CFG_MALLOC_LEN		(128 * 1024)	/* Reserved for malloc */
+#define CONFIG_SYS_MONITOR_LEN		(256 * 1024) /* Reserve 256 kB for Mon */
+#define CONFIG_SYS_MALLOC_LEN		(128 * 1024)	/* Reserved for malloc */
 
 /* Serial Port */
 #define CONFIG_CONS_INDEX     2
 #undef	CONFIG_SERIAL_SOFTWARE_FIFO
-#define CFG_NS16550
-#define CFG_NS16550_SERIAL
-#define CFG_NS16550_REG_SIZE    1
-#define CFG_NS16550_CLK		get_bus_freq(0)
+#define CONFIG_SYS_NS16550
+#define CONFIG_SYS_NS16550_SERIAL
+#define CONFIG_SYS_NS16550_REG_SIZE    1
+#define CONFIG_SYS_NS16550_CLK		get_bus_freq(0)
 
-#define CFG_BAUDRATE_TABLE  \
+#define CONFIG_SYS_BAUDRATE_TABLE  \
 	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200}
 
-#define CFG_NS16550_COM1        (CFG_CCSRBAR+0x4500)
-#define CFG_NS16550_COM2        (CFG_CCSRBAR+0x4600)
+#define CONFIG_SYS_NS16550_COM1        (CONFIG_SYS_CCSRBAR+0x4500)
+#define CONFIG_SYS_NS16550_COM2        (CONFIG_SYS_CCSRBAR+0x4600)
 
 /* Use the HUSH parser */
-#define CFG_HUSH_PARSER
-#ifdef  CFG_HUSH_PARSER
-#define CFG_PROMPT_HUSH_PS2 "> "
+#define CONFIG_SYS_HUSH_PARSER
+#ifdef  CONFIG_SYS_HUSH_PARSER
+#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
 #endif
 
 /* pass open firmware flat tree */
@@ -318,8 +316,8 @@ extern unsigned long get_clock_freq(void);
 #define CONFIG_OF_BOARD_SETUP		1
 #define CONFIG_OF_STDOUT_VIA_ALIAS	1
 
-#define CFG_64BIT_VSPRINTF	1
-#define CFG_64BIT_STRTOUL	1
+#define CONFIG_SYS_64BIT_VSPRINTF	1
+#define CONFIG_SYS_64BIT_STRTOUL	1
 
 /*
  * I2C
@@ -327,29 +325,35 @@ extern unsigned long get_clock_freq(void);
 #define CONFIG_FSL_I2C		/* Use FSL common I2C driver */
 #define CONFIG_HARD_I2C		/* I2C with hardware support*/
 #undef	CONFIG_SOFT_I2C			/* I2C bit-banged */
-#define CFG_I2C_SPEED		400000	/* I2C speed and slave address */
-#define CFG_I2C_EEPROM_ADDR	0x57
-#define CFG_I2C_SLAVE		0x7F
-#define CFG_I2C_NOPROBES        {0x69}	/* Don't probe these addrs */
-#define CFG_I2C_OFFSET		0x3000
+#define CONFIG_SYS_I2C_SPEED		400000	/* I2C speed and slave address */
+#define CONFIG_SYS_I2C_SLAVE		0x7F
+#define CONFIG_SYS_I2C_NOPROBES        {0x69}	/* Don't probe these addrs */
+#define CONFIG_SYS_I2C_OFFSET		0x3000
+
+/* EEPROM */
+#define CONFIG_ID_EEPROM
+#define CONFIG_SYS_I2C_EEPROM_CCID
+#define CONFIG_SYS_ID_EEPROM
+#define CONFIG_SYS_I2C_EEPROM_ADDR     0x57
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
 
 /*
  * General PCI
  * Memory space is mapped 1-1, but I/O space must start from 0.
  */
-#define CFG_PCI1_MEM_BASE	0x80000000
-#define CFG_PCI1_MEM_PHYS	CFG_PCI1_MEM_BASE
-#define CFG_PCI1_MEM_SIZE	0x20000000	/* 512M */
-#define CFG_PCI1_IO_BASE	0x00000000
-#define CFG_PCI1_IO_PHYS	0xe2000000
-#define CFG_PCI1_IO_SIZE	0x100000	/* 1M */
-
-#define CFG_PCI2_MEM_BASE	0xa0000000
-#define CFG_PCI2_MEM_PHYS	CFG_PCI2_MEM_BASE
-#define CFG_PCI2_MEM_SIZE	0x20000000	/* 512M */
-#define CFG_PCI2_IO_BASE	0x00000000
-#define CFG_PCI2_IO_PHYS	0xe2100000
-#define CFG_PCI2_IO_SIZE	0x100000	/* 1M */
+#define CONFIG_SYS_PCI1_MEM_BASE	0x80000000
+#define CONFIG_SYS_PCI1_MEM_PHYS	CONFIG_SYS_PCI1_MEM_BASE
+#define CONFIG_SYS_PCI1_MEM_SIZE	0x20000000	/* 512M */
+#define CONFIG_SYS_PCI1_IO_BASE	0x00000000
+#define CONFIG_SYS_PCI1_IO_PHYS	0xe2000000
+#define CONFIG_SYS_PCI1_IO_SIZE	0x100000	/* 1M */
+
+#define CONFIG_SYS_PCI2_MEM_BASE	0xa0000000
+#define CONFIG_SYS_PCI2_MEM_PHYS	CONFIG_SYS_PCI2_MEM_BASE
+#define CONFIG_SYS_PCI2_MEM_SIZE	0x20000000	/* 512M */
+#define CONFIG_SYS_PCI2_IO_BASE	0x00000000
+#define CONFIG_SYS_PCI2_IO_PHYS	0xe2100000
+#define CONFIG_SYS_PCI2_IO_SIZE	0x100000	/* 1M */
 
 #ifdef CONFIG_LEGACY
 #define BRIDGE_ID 17
@@ -369,7 +373,7 @@ extern unsigned long get_clock_freq(void);
 #undef CONFIG_TULIP
 
 #undef CONFIG_PCI_SCAN_SHOW		/* show pci devices on startup */
-#define CFG_PCI_SUBSYS_VENDORID 0x1057  /* Motorola */
+#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x1057  /* Motorola */
 
 #endif	/* CONFIG_PCI */
 
@@ -400,13 +404,13 @@ extern unsigned long get_clock_freq(void);
 /*
  * Environment
  */
-#define CFG_ENV_IS_IN_FLASH	1
-#define CFG_ENV_ADDR		(CFG_MONITOR_BASE + 0x40000)
-#define CFG_ENV_SECT_SIZE	0x40000	/* 256K(one sector) for env */
-#define CFG_ENV_SIZE		0x2000
+#define CONFIG_ENV_IS_IN_FLASH	1
+#define CONFIG_ENV_ADDR		(CONFIG_SYS_MONITOR_BASE + 0x40000)
+#define CONFIG_ENV_SECT_SIZE	0x40000	/* 256K(one sector) for env */
+#define CONFIG_ENV_SIZE		0x2000
 
 #define CONFIG_LOADS_ECHO	1	/* echo on for serial download */
-#define CFG_LOADS_BAUD_CHANGE	1	/* allow baudrate change */
+#define CONFIG_SYS_LOADS_BAUD_CHANGE	1	/* allow baudrate change */
 
 /*
  * BOOTP options
@@ -426,6 +430,8 @@ extern unsigned long get_clock_freq(void);
 #define CONFIG_CMD_I2C
 #define CONFIG_CMD_MII
 #define CONFIG_CMD_ELF
+#define CONFIG_CMD_IRQ
+#define CONFIG_CMD_SETEXPR
 
 #if defined(CONFIG_PCI)
     #define CONFIG_CMD_PCI
@@ -437,26 +443,26 @@ extern unsigned long get_clock_freq(void);
 /*
  * Miscellaneous configurable options
  */
-#define CFG_LONGHELP			/* undef to save memory	*/
+#define CONFIG_SYS_LONGHELP			/* undef to save memory	*/
 #define CONFIG_CMDLINE_EDITING		/* Command-line editing */
-#define CFG_LOAD_ADDR	0x2000000	/* default load address */
-#define CFG_PROMPT	"=> "		/* Monitor Command Prompt */
+#define CONFIG_SYS_LOAD_ADDR	0x2000000	/* default load address */
+#define CONFIG_SYS_PROMPT	"=> "		/* Monitor Command Prompt */
 #if defined(CONFIG_CMD_KGDB)
-#define CFG_CBSIZE	1024		/* Console I/O Buffer Size */
+#define CONFIG_SYS_CBSIZE	1024		/* Console I/O Buffer Size */
 #else
-#define CFG_CBSIZE	256		/* Console I/O Buffer Size */
+#define CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size */
 #endif
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define CFG_MAXARGS	16		/* max number of command args */
-#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size */
-#define CFG_HZ		1000		/* decrementer freq: 1ms ticks */
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS	16		/* max number of command args */
+#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size */
+#define CONFIG_SYS_HZ		1000		/* decrementer freq: 1ms ticks */
 
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define CFG_BOOTMAPSZ	(8 << 20)	/* Initial Memory map for Linux*/
+#define CONFIG_SYS_BOOTMAPSZ	(8 << 20)	/* Initial Memory map for Linux*/
 
 /*
  * Internal Definitions
diff --git a/include/configs/MPC8544DS.h b/include/configs/MPC8544DS.h
index 573819203..9b1b34cc8 100644
--- a/include/configs/MPC8544DS.h
+++ b/include/configs/MPC8544DS.h
@@ -41,6 +41,7 @@
 #define CONFIG_PCIE3		1	/* PCIE controler 3 (ULI bridge) */
 #define CONFIG_FSL_PCI_INIT	1	/* Use common FSL init code */
 #define CONFIG_FSL_PCIE_RESET	1	/* need PCIe reset errata */
+#define CONFIG_SYS_PCI_64BIT	1	/* enable 64-bit PCI resources */
 
 #define CONFIG_FSL_LAW		1	/* Use common FSL init code */
 
@@ -65,30 +66,29 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
  */
 #define CONFIG_L2_CACHE			/* toggle L2 cache */
 #define CONFIG_BTB			/* toggle branch predition */
-#define CONFIG_ADDR_STREAMING		/* toggle addr streaming */
 
 /*
  * Only possible on E500 Version 2 or newer cores.
  */
 #define CONFIG_ENABLE_36BIT_PHYS	1
 
-#define CFG_MEMTEST_START	0x00200000	/* memtest works on */
-#define CFG_MEMTEST_END		0x00400000
+#define CONFIG_SYS_MEMTEST_START	0x00200000	/* memtest works on */
+#define CONFIG_SYS_MEMTEST_END		0x00400000
 #define CONFIG_PANIC_HANG	/* do not reset board on panic */
 
 /*
  * Base addresses -- Note these are effective addresses where the
  * actual resources get mapped (not physical addresses)
  */
-#define CFG_CCSRBAR_DEFAULT	0xff700000	/* CCSRBAR Default */
-#define CFG_CCSRBAR		0xe0000000	/* relocated CCSRBAR */
-#define CFG_CCSRBAR_PHYS	CFG_CCSRBAR	/* physical addr of CCSRBAR */
-#define CFG_IMMR		CFG_CCSRBAR	/* PQII uses CFG_IMMR */
+#define CONFIG_SYS_CCSRBAR_DEFAULT	0xff700000	/* CCSRBAR Default */
+#define CONFIG_SYS_CCSRBAR		0xe0000000	/* relocated CCSRBAR */
+#define CONFIG_SYS_CCSRBAR_PHYS	CONFIG_SYS_CCSRBAR	/* physical addr of CCSRBAR */
+#define CONFIG_SYS_IMMR		CONFIG_SYS_CCSRBAR	/* PQII uses CONFIG_SYS_IMMR */
 
-#define CFG_PCI1_ADDR		(CFG_CCSRBAR+0x8000)
-#define CFG_PCIE1_ADDR		(CFG_CCSRBAR+0xa000)
-#define CFG_PCIE2_ADDR		(CFG_CCSRBAR+0x9000)
-#define CFG_PCIE3_ADDR		(CFG_CCSRBAR+0xb000)
+#define CONFIG_SYS_PCI1_ADDR		(CONFIG_SYS_CCSRBAR+0x8000)
+#define CONFIG_SYS_PCIE1_ADDR		(CONFIG_SYS_CCSRBAR+0xa000)
+#define CONFIG_SYS_PCIE2_ADDR		(CONFIG_SYS_CCSRBAR+0x9000)
+#define CONFIG_SYS_PCIE3_ADDR		(CONFIG_SYS_CCSRBAR+0xb000)
 
 /* DDR Setup */
 #define CONFIG_FSL_DDR2
@@ -96,11 +96,11 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 #define CONFIG_SPD_EEPROM		/* Use SPD EEPROM for DDR setup */
 #define CONFIG_DDR_SPD
 
-#undef CONFIG_ECC_INIT_VIA_DDRCONTROLLER	/* DDR controller or DMA? */
+#define CONFIG_ECC_INIT_VIA_DDRCONTROLLER	/* DDR controller or DMA? */
 #define CONFIG_MEM_INIT_VALUE	0xDeadBeef
 
-#define CFG_DDR_SDRAM_BASE	0x00000000
-#define CFG_SDRAM_BASE		CFG_DDR_SDRAM_BASE
+#define CONFIG_SYS_DDR_SDRAM_BASE	0x00000000
+#define CONFIG_SYS_SDRAM_BASE		CONFIG_SYS_DDR_SDRAM_BASE
 #define CONFIG_VERY_BIG_RAM
 
 #define CONFIG_NUM_DDR_CONTROLLERS	1
@@ -145,39 +145,39 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 /*
  * Local Bus Definitions
  */
-#define CFG_BOOT_BLOCK		0xfc000000	/* boot TLB */
+#define CONFIG_SYS_BOOT_BLOCK		0xfc000000	/* boot TLB */
 
-#define CFG_FLASH_BASE		0xff800000	/* start of FLASH 8M */
+#define CONFIG_SYS_FLASH_BASE		0xff800000	/* start of FLASH 8M */
 
-#define CFG_BR0_PRELIM		0xff801001
-#define CFG_BR1_PRELIM		0xfe801001
+#define CONFIG_SYS_BR0_PRELIM		0xff801001
+#define CONFIG_SYS_BR1_PRELIM		0xfe801001
 
-#define CFG_OR0_PRELIM		0xff806e65
-#define CFG_OR1_PRELIM		0xff806e65
+#define CONFIG_SYS_OR0_PRELIM		0xff806e65
+#define CONFIG_SYS_OR1_PRELIM		0xff806e65
 
-#define CFG_FLASH_BANKS_LIST	{CFG_FLASH_BASE}
+#define CONFIG_SYS_FLASH_BANKS_LIST	{CONFIG_SYS_FLASH_BASE}
 
-#define CFG_FLASH_QUIET_TEST
-#define CFG_MAX_FLASH_BANKS	1		/* number of banks */
-#define CFG_MAX_FLASH_SECT	128		/* sectors per device */
-#undef	CFG_FLASH_CHECKSUM
-#define CFG_FLASH_ERASE_TOUT	60000		/* Flash Erase Timeout (ms) */
-#define CFG_FLASH_WRITE_TOUT	500		/* Flash Write Timeout (ms) */
+#define CONFIG_SYS_FLASH_QUIET_TEST
+#define CONFIG_SYS_MAX_FLASH_BANKS	1		/* number of banks */
+#define CONFIG_SYS_MAX_FLASH_SECT	128		/* sectors per device */
+#undef	CONFIG_SYS_FLASH_CHECKSUM
+#define CONFIG_SYS_FLASH_ERASE_TOUT	60000		/* Flash Erase Timeout (ms) */
+#define CONFIG_SYS_FLASH_WRITE_TOUT	500		/* Flash Write Timeout (ms) */
 #define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */
 
-#define CFG_MONITOR_BASE	TEXT_BASE	/* start of monitor */
+#define CONFIG_SYS_MONITOR_BASE	TEXT_BASE	/* start of monitor */
 
 #define CONFIG_FLASH_CFI_DRIVER
-#define CFG_FLASH_CFI
-#define CFG_FLASH_EMPTY_INFO
+#define CONFIG_SYS_FLASH_CFI
+#define CONFIG_SYS_FLASH_EMPTY_INFO
 
-#define CFG_LBC_NONCACHE_BASE	0xf8000000
+#define CONFIG_SYS_LBC_NONCACHE_BASE	0xf8000000
 
-#define CFG_BR2_PRELIM		0xf8201001	/* port size 16bit */
-#define CFG_OR2_PRELIM		0xfff06ff7	/* 1MB Compact Flash area*/
+#define CONFIG_SYS_BR2_PRELIM		0xf8201001	/* port size 16bit */
+#define CONFIG_SYS_OR2_PRELIM		0xfff06ff7	/* 1MB Compact Flash area*/
 
-#define CFG_BR3_PRELIM		0xf8100801	/* port size 8bit */
-#define CFG_OR3_PRELIM		0xfff06ff7	/* 1MB PIXIS area*/
+#define CONFIG_SYS_BR3_PRELIM		0xf8100801	/* port size 8bit */
+#define CONFIG_SYS_OR3_PRELIM		0xfff06ff7	/* 1MB PIXIS area*/
 
 #define CONFIG_FSL_PIXIS	1	/* use common PIXIS code */
 #define PIXIS_BASE	0xf8100000	/* PIXIS registers */
@@ -196,22 +196,27 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 #define PIXIS_VSPEED1		0x18	/* VELA VSpeed 1 */
 #define PIXIS_VCLKH		0x19	/* VELA VCLKH register */
 #define PIXIS_VCLKL		0x1A	/* VELA VCLKL register */
-#define CFG_PIXIS_VBOOT_MASK	0x40    /* Reset altbank mask*/
+#define PIXIS_VSPEED2		0x1d	/* VELA VSpeed 2 */
+#define CONFIG_SYS_PIXIS_VBOOT_MASK	0x40    /* Reset altbank mask*/
+#define PIXIS_VSPEED2_TSEC1SER	0x2
+#define PIXIS_VSPEED2_TSEC3SER	0x1
+#define PIXIS_VCFGEN1_TSEC1SER	0x20
+#define PIXIS_VCFGEN1_TSEC3SER	0x40
+#define PIXIS_VSPEED2_MASK	(PIXIS_VSPEED2_TSEC1SER|PIXIS_VSPEED2_TSEC3SER)
+#define PIXIS_VCFGEN1_MASK	(PIXIS_VCFGEN1_TSEC1SER|PIXIS_VCFGEN1_TSEC3SER)
 
 
-/* define to use L1 as initial stack */
-#define CONFIG_L1_INIT_RAM
-#define CFG_INIT_RAM_LOCK      1
-#define CFG_INIT_RAM_ADDR      0xf4010000      /* Initial L1 address */
-#define CFG_INIT_RAM_END       0x00004000      /* End of used area in RAM */
+#define CONFIG_SYS_INIT_RAM_LOCK      1
+#define CONFIG_SYS_INIT_RAM_ADDR      0xf4010000      /* Initial L1 address */
+#define CONFIG_SYS_INIT_RAM_END       0x00004000      /* End of used area in RAM */
 
 
-#define CFG_GBL_DATA_SIZE	128	/* num bytes initial data */
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_GBL_DATA_SIZE	128	/* num bytes initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
-#define CFG_MONITOR_LEN		(256 * 1024) /* Reserve 256 kB for Mon */
-#define CFG_MALLOC_LEN		(1024 * 1024)	/* Reserved for malloc */
+#define CONFIG_SYS_MONITOR_LEN		(256 * 1024) /* Reserve 256 kB for Mon */
+#define CONFIG_SYS_MALLOC_LEN		(1024 * 1024)	/* Reserved for malloc */
 
 /* Serial Port - controlled on board with jumper J8
  * open - index 2
@@ -219,21 +224,21 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
  */
 #define CONFIG_CONS_INDEX	1
 #undef	CONFIG_SERIAL_SOFTWARE_FIFO
-#define CFG_NS16550
-#define CFG_NS16550_SERIAL
-#define CFG_NS16550_REG_SIZE	1
-#define CFG_NS16550_CLK		get_bus_freq(0)
+#define CONFIG_SYS_NS16550
+#define CONFIG_SYS_NS16550_SERIAL
+#define CONFIG_SYS_NS16550_REG_SIZE	1
+#define CONFIG_SYS_NS16550_CLK		get_bus_freq(0)
 
-#define CFG_BAUDRATE_TABLE	\
+#define CONFIG_SYS_BAUDRATE_TABLE	\
 	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200}
 
-#define CFG_NS16550_COM1	(CFG_CCSRBAR+0x4500)
-#define CFG_NS16550_COM2	(CFG_CCSRBAR+0x4600)
+#define CONFIG_SYS_NS16550_COM1	(CONFIG_SYS_CCSRBAR+0x4500)
+#define CONFIG_SYS_NS16550_COM2	(CONFIG_SYS_CCSRBAR+0x4600)
 
 /* Use the HUSH parser */
-#define CFG_HUSH_PARSER
-#ifdef	CFG_HUSH_PARSER
-#define CFG_PROMPT_HUSH_PS2 "> "
+#define CONFIG_SYS_HUSH_PARSER
+#ifdef	CONFIG_SYS_HUSH_PARSER
+#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
 #endif
 
 /* pass open firmware flat tree */
@@ -241,72 +246,67 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 #define CONFIG_OF_BOARD_SETUP		1
 #define CONFIG_OF_STDOUT_VIA_ALIAS	1
 
-#define CFG_64BIT_STRTOUL		1
-#define CFG_64BIT_VSPRINTF		1
+#define CONFIG_SYS_64BIT_STRTOUL		1
+#define CONFIG_SYS_64BIT_VSPRINTF		1
 
 /* I2C */
 #define CONFIG_FSL_I2C		/* Use FSL common I2C driver */
 #define CONFIG_HARD_I2C		/* I2C with hardware support */
 #undef	CONFIG_SOFT_I2C		/* I2C bit-banged */
-#define CFG_I2C_SPEED		400000	/* I2C speed and slave address */
-#define CFG_I2C_EEPROM_ADDR	0x57
-#define CFG_I2C_SLAVE		0x7F
-#define CFG_I2C_NOPROBES	{0x69}	/* Don't probe these addrs */
-#define CFG_I2C_OFFSET		0x3100
+#define CONFIG_SYS_I2C_SPEED		400000	/* I2C speed and slave address */
+#define CONFIG_SYS_I2C_EEPROM_ADDR	0x57
+#define CONFIG_SYS_I2C_SLAVE		0x7F
+#define CONFIG_SYS_I2C_NOPROBES	{0x69}	/* Don't probe these addrs */
+#define CONFIG_SYS_I2C_OFFSET		0x3100
 
 /*
  * General PCI
  * Memory space is mapped 1-1, but I/O space must start from 0.
  */
-#define CFG_PCIE_PHYS		0x80000000	/* 1G PCIE TLB */
-#define CFG_PCI_PHYS		0xc0000000	/* 512M PCI TLB */
+#define CONFIG_SYS_PCIE_PHYS		0x80000000	/* 1G PCIE TLB */
+#define CONFIG_SYS_PCI_PHYS		0xc0000000	/* 512M PCI TLB */
 
-#define CFG_PCI1_MEM_BASE	0xc0000000
-#define CFG_PCI1_MEM_PHYS	CFG_PCI1_MEM_BASE
-#define CFG_PCI1_MEM_SIZE	0x20000000	/* 512M */
-#define CFG_PCI1_IO_BASE	0x00000000
-#define CFG_PCI1_IO_PHYS	0xe1000000
-#define CFG_PCI1_IO_SIZE	0x00010000	/* 64k */
-
-/* PCI view of System Memory */
-#define CFG_PCI_MEMORY_BUS	0x00000000
-#define CFG_PCI_MEMORY_PHYS	0x00000000
-#define CFG_PCI_MEMORY_SIZE	0x80000000
+#define CONFIG_SYS_PCI1_MEM_BASE	0xc0000000
+#define CONFIG_SYS_PCI1_MEM_PHYS	CONFIG_SYS_PCI1_MEM_BASE
+#define CONFIG_SYS_PCI1_MEM_SIZE	0x20000000	/* 512M */
+#define CONFIG_SYS_PCI1_IO_BASE	0x00000000
+#define CONFIG_SYS_PCI1_IO_PHYS	0xe1000000
+#define CONFIG_SYS_PCI1_IO_SIZE	0x00010000	/* 64k */
 
 /* controller 2, Slot 1, tgtid 1, Base address 9000 */
-#define CFG_PCIE2_MEM_BASE	0x80000000
-#define CFG_PCIE2_MEM_PHYS	CFG_PCIE2_MEM_BASE
-#define CFG_PCIE2_MEM_SIZE	0x20000000	/* 512M */
-#define CFG_PCIE2_IO_BASE	0x00000000
-#define CFG_PCIE2_IO_PHYS	0xe1010000
-#define CFG_PCIE2_IO_SIZE	0x00010000	/* 64k */
+#define CONFIG_SYS_PCIE2_MEM_BASE	0x80000000
+#define CONFIG_SYS_PCIE2_MEM_PHYS	CONFIG_SYS_PCIE2_MEM_BASE
+#define CONFIG_SYS_PCIE2_MEM_SIZE	0x20000000	/* 512M */
+#define CONFIG_SYS_PCIE2_IO_BASE	0x00000000
+#define CONFIG_SYS_PCIE2_IO_PHYS	0xe1010000
+#define CONFIG_SYS_PCIE2_IO_SIZE	0x00010000	/* 64k */
 
 /* controller 1, Slot 2,tgtid 2, Base address a000 */
-#define CFG_PCIE1_MEM_BASE	0xa0000000
-#define CFG_PCIE1_MEM_PHYS	CFG_PCIE1_MEM_BASE
-#define CFG_PCIE1_MEM_SIZE	0x10000000	/* 256M */
-#define CFG_PCIE1_IO_BASE	0x00000000
-#define CFG_PCIE1_IO_PHYS	0xe1020000
-#define CFG_PCIE1_IO_SIZE	0x00010000	/* 64k */
+#define CONFIG_SYS_PCIE1_MEM_BASE	0xa0000000
+#define CONFIG_SYS_PCIE1_MEM_PHYS	CONFIG_SYS_PCIE1_MEM_BASE
+#define CONFIG_SYS_PCIE1_MEM_SIZE	0x10000000	/* 256M */
+#define CONFIG_SYS_PCIE1_IO_BASE	0x00000000
+#define CONFIG_SYS_PCIE1_IO_PHYS	0xe1020000
+#define CONFIG_SYS_PCIE1_IO_SIZE	0x00010000	/* 64k */
 
 /* controller 3, direct to uli, tgtid 3, Base address b000 */
-#define CFG_PCIE3_MEM_BASE	0xb0000000
-#define CFG_PCIE3_MEM_PHYS	CFG_PCIE3_MEM_BASE
-#define CFG_PCIE3_MEM_SIZE	0x00100000	/* 1M */
-#define CFG_PCIE3_IO_BASE	0x00000000
-#define CFG_PCIE3_IO_PHYS	0xb0100000	/* reuse mem LAW */
-#define CFG_PCIE3_IO_SIZE	0x00100000	/* 1M */
-#define CFG_PCIE3_MEM_BASE2	0xb0200000
-#define CFG_PCIE3_MEM_PHYS2	CFG_PCIE3_MEM_BASE2
-#define CFG_PCIE3_MEM_SIZE2	0x00200000	/* 1M */
+#define CONFIG_SYS_PCIE3_MEM_BASE	0xb0000000
+#define CONFIG_SYS_PCIE3_MEM_PHYS	CONFIG_SYS_PCIE3_MEM_BASE
+#define CONFIG_SYS_PCIE3_MEM_SIZE	0x00100000	/* 1M */
+#define CONFIG_SYS_PCIE3_IO_BASE	0x00000000
+#define CONFIG_SYS_PCIE3_IO_PHYS	0xb0100000	/* reuse mem LAW */
+#define CONFIG_SYS_PCIE3_IO_SIZE	0x00100000	/* 1M */
+#define CONFIG_SYS_PCIE3_MEM_BASE2	0xb0200000
+#define CONFIG_SYS_PCIE3_MEM_PHYS2	CONFIG_SYS_PCIE3_MEM_BASE2
+#define CONFIG_SYS_PCIE3_MEM_SIZE2	0x00200000	/* 1M */
 
 #if defined(CONFIG_PCI)
 
 /*PCIE video card used*/
-#define VIDEO_IO_OFFSET		CFG_PCIE2_IO_PHYS
+#define VIDEO_IO_OFFSET		CONFIG_SYS_PCIE2_IO_PHYS
 
 /*PCI video card used*/
-/*#define VIDEO_IO_OFFSET	CFG_PCI1_IO_PHYS*/
+/*#define VIDEO_IO_OFFSET	CONFIG_SYS_PCI1_IO_PHYS*/
 
 /* video */
 #define CONFIG_VIDEO
@@ -319,7 +319,7 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 #define CONFIG_ATI_RADEON_FB
 #define CONFIG_VIDEO_LOGO
 /*#define CONFIG_CONSOLE_CURSOR*/
-#define CFG_ISA_IO_BASE_ADDRESS VIDEO_IO_OFFSET
+#define CONFIG_SYS_ISA_IO_BASE_ADDRESS VIDEO_IO_OFFSET
 #endif
 
 #define CONFIG_NET_MULTI
@@ -336,8 +336,8 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 #endif
 
 #ifndef CONFIG_PCI_PNP
-	#define PCI_ENET0_IOADDR	CFG_PCI1_IO_BASE
-	#define PCI_ENET0_MEMADDR	CFG_PCI1_IO_BASE
+	#define PCI_ENET0_IOADDR	CONFIG_SYS_PCI1_IO_BASE
+	#define PCI_ENET0_MEMADDR	CONFIG_SYS_PCI1_IO_BASE
 	#define PCI_IDSEL_NUMBER	0x11	/* IDSEL = AD11 */
 #endif
 
@@ -347,10 +347,10 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 
 #ifdef CONFIG_SCSI_AHCI
 #define CONFIG_SATA_ULI5288
-#define CFG_SCSI_MAX_SCSI_ID	4
-#define CFG_SCSI_MAX_LUN	1
-#define CFG_SCSI_MAX_DEVICE	(CFG_SCSI_MAX_SCSI_ID * CFG_SCSI_MAX_LUN)
-#define CFG_SCSI_MAXDEVICE	CFG_SCSI_MAX_DEVICE
+#define CONFIG_SYS_SCSI_MAX_SCSI_ID	4
+#define CONFIG_SYS_SCSI_MAX_LUN	1
+#define CONFIG_SYS_SCSI_MAX_DEVICE	(CONFIG_SYS_SCSI_MAX_SCSI_ID * CONFIG_SYS_SCSI_MAX_LUN)
+#define CONFIG_SYS_SCSI_MAXDEVICE	CONFIG_SYS_SCSI_MAX_DEVICE
 #endif /* SCSCI */
 
 #endif	/* CONFIG_PCI */
@@ -369,6 +369,10 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 #define CONFIG_TSEC3	1
 #define CONFIG_TSEC3_NAME	"eTSEC3"
 
+#define CONFIG_PIXIS_SGMII_CMD
+#define CONFIG_FSL_SGMII_RISER	1
+#define SGMII_RISER_PHY_OFFSET	0x1c
+
 #define TSEC1_PHY_ADDR		0
 #define TSEC3_PHY_ADDR		1
 
@@ -386,17 +390,17 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 /*
  * Environment
  */
-#define CFG_ENV_IS_IN_FLASH	1
-#if CFG_MONITOR_BASE > 0xfff80000
-#define CFG_ENV_ADDR		0xfff80000
+#define CONFIG_ENV_IS_IN_FLASH	1
+#if CONFIG_SYS_MONITOR_BASE > 0xfff80000
+#define CONFIG_ENV_ADDR		0xfff80000
 #else
-#define CFG_ENV_ADDR		(CFG_MONITOR_BASE + 0x70000)
+#define CONFIG_ENV_ADDR		(CONFIG_SYS_MONITOR_BASE + 0x70000)
 #endif
-#define CFG_ENV_SIZE		0x2000
-#define CFG_ENV_SECT_SIZE	0x10000 /* 64K (one sector) */
+#define CONFIG_ENV_SIZE		0x2000
+#define CONFIG_ENV_SECT_SIZE	0x10000 /* 64K (one sector) */
 
 #define CONFIG_LOADS_ECHO	1	/* echo on for serial download */
-#define CFG_LOADS_BAUD_CHANGE	1	/* allow baudrate change */
+#define CONFIG_SYS_LOADS_BAUD_CHANGE	1	/* allow baudrate change */
 
 /*
  * BOOTP options
@@ -416,6 +420,8 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 #define CONFIG_CMD_I2C
 #define CONFIG_CMD_MII
 #define CONFIG_CMD_ELF
+#define CONFIG_CMD_IRQ
+#define CONFIG_CMD_SETEXPR
 
 #if defined(CONFIG_PCI)
     #define CONFIG_CMD_PCI
@@ -431,26 +437,26 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 /*
  * Miscellaneous configurable options
  */
-#define CFG_LONGHELP			/* undef to save memory	*/
+#define CONFIG_SYS_LONGHELP			/* undef to save memory	*/
 #define CONFIG_CMDLINE_EDITING		/* Command-line editing */
-#define CFG_LOAD_ADDR	0x2000000	/* default load address */
-#define CFG_PROMPT	"=> "		/* Monitor Command Prompt */
+#define CONFIG_SYS_LOAD_ADDR	0x2000000	/* default load address */
+#define CONFIG_SYS_PROMPT	"=> "		/* Monitor Command Prompt */
 #if defined(CONFIG_CMD_KGDB)
-#define CFG_CBSIZE	1024		/* Console I/O Buffer Size */
+#define CONFIG_SYS_CBSIZE	1024		/* Console I/O Buffer Size */
 #else
-#define CFG_CBSIZE	256		/* Console I/O Buffer Size */
+#define CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size */
 #endif
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define CFG_MAXARGS	16		/* max number of command args */
-#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size */
-#define CFG_HZ		1000		/* decrementer freq: 1ms ticks */
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS	16		/* max number of command args */
+#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size */
+#define CONFIG_SYS_HZ		1000		/* decrementer freq: 1ms ticks */
 
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define CFG_BOOTMAPSZ	(8 << 20)	/* Initial Memory map for Linux*/
+#define CONFIG_SYS_BOOTMAPSZ	(8 << 20)	/* Initial Memory map for Linux*/
 
 /*
  * Internal Definitions
diff --git a/include/configs/MPC8548CDS.h b/include/configs/MPC8548CDS.h
index ec0b4ffc6..e1bd45ef1 100644
--- a/include/configs/MPC8548CDS.h
+++ b/include/configs/MPC8548CDS.h
@@ -43,6 +43,7 @@
 #undef CONFIG_PCI2
 #define CONFIG_FSL_PCI_INIT	1	/* Use common FSL init code */
 #define CONFIG_FSL_PCIE_RESET	1	/* need PCIe reset errata */
+#define CONFIG_SYS_PCI_64BIT	1	/* enable 64-bit PCI resources */
 
 #define CONFIG_TSEC_ENET		/* tsec ethernet support */
 #define CONFIG_ENV_OVERWRITE
@@ -50,7 +51,6 @@
 #define CONFIG_FSL_LAW		1	/* Use common FSL init code */
 
 #define CONFIG_FSL_VIA
-#define CONFIG_FSL_CDS_EEPROM
 
 /*
  * When initializing flash, if we cannot find the manufacturer ID,
@@ -69,7 +69,6 @@ extern unsigned long get_clock_freq(void);
  */
 #define CONFIG_L2_CACHE			/* toggle L2 cache */
 #define CONFIG_BTB			/* toggle branch predition */
-#define CONFIG_ADDR_STREAMING		/* toggle addr streaming */
 #define CONFIG_CLEAR_LAW0		/* Clear LAW0 in cpu_init_r */
 
 /*
@@ -77,21 +76,21 @@ extern unsigned long get_clock_freq(void);
  */
 #define CONFIG_ENABLE_36BIT_PHYS	1
 
-#define CFG_MEMTEST_START	0x00200000	/* memtest works on */
-#define CFG_MEMTEST_END		0x00400000
+#define CONFIG_SYS_MEMTEST_START	0x00200000	/* memtest works on */
+#define CONFIG_SYS_MEMTEST_END		0x00400000
 
 /*
  * Base addresses -- Note these are effective addresses where the
  * actual resources get mapped (not physical addresses)
  */
-#define CFG_CCSRBAR_DEFAULT	0xff700000	/* CCSRBAR Default */
-#define CFG_CCSRBAR		0xe0000000	/* relocated CCSRBAR */
-#define CFG_CCSRBAR_PHYS	CFG_CCSRBAR	/* physical addr of CCSRBAR */
-#define CFG_IMMR		CFG_CCSRBAR	/* PQII uses CFG_IMMR */
+#define CONFIG_SYS_CCSRBAR_DEFAULT	0xff700000	/* CCSRBAR Default */
+#define CONFIG_SYS_CCSRBAR		0xe0000000	/* relocated CCSRBAR */
+#define CONFIG_SYS_CCSRBAR_PHYS	CONFIG_SYS_CCSRBAR	/* physical addr of CCSRBAR */
+#define CONFIG_SYS_IMMR		CONFIG_SYS_CCSRBAR	/* PQII uses CONFIG_SYS_IMMR */
 
-#define CFG_PCI1_ADDR	(CFG_CCSRBAR+0x8000)
-#define CFG_PCI2_ADDR	(CFG_CCSRBAR+0x9000)
-#define CFG_PCIE1_ADDR	(CFG_CCSRBAR+0xa000)
+#define CONFIG_SYS_PCI1_ADDR	(CONFIG_SYS_CCSRBAR+0x8000)
+#define CONFIG_SYS_PCI2_ADDR	(CONFIG_SYS_CCSRBAR+0x9000)
+#define CONFIG_SYS_PCIE1_ADDR	(CONFIG_SYS_CCSRBAR+0xa000)
 
 /* DDR Setup */
 #define CONFIG_FSL_DDR2
@@ -100,11 +99,11 @@ extern unsigned long get_clock_freq(void);
 #define CONFIG_DDR_SPD
 #define CONFIG_DDR_DLL			/* possible DLL fix needed */
 
-#undef CONFIG_ECC_INIT_VIA_DDRCONTROLLER	/* DDR controller or DMA? */
+#define CONFIG_ECC_INIT_VIA_DDRCONTROLLER	/* DDR controller or DMA? */
 #define CONFIG_MEM_INIT_VALUE	0xDeadBeef
 
-#define CFG_DDR_SDRAM_BASE	0x00000000	/* DDR is system memory*/
-#define CFG_SDRAM_BASE		CFG_DDR_SDRAM_BASE
+#define CONFIG_SYS_DDR_SDRAM_BASE	0x00000000	/* DDR is system memory*/
+#define CONFIG_SYS_SDRAM_BASE		CONFIG_SYS_DDR_SDRAM_BASE
 
 #define CONFIG_NUM_DDR_CONTROLLERS	1
 #define CONFIG_DIMM_SLOTS_PER_CTLR	1
@@ -154,43 +153,43 @@ extern unsigned long get_clock_freq(void);
  * 1111 1111 1000 0000 0110 1110 0110 0101 = ff806e65	 ORx
  */
 
-#define CFG_BOOT_BLOCK		0xff000000	/* boot TLB block */
-#define CFG_FLASH_BASE		CFG_BOOT_BLOCK	/* start of FLASH 16M */
+#define CONFIG_SYS_BOOT_BLOCK		0xff000000	/* boot TLB block */
+#define CONFIG_SYS_FLASH_BASE		CONFIG_SYS_BOOT_BLOCK	/* start of FLASH 16M */
 
-#define CFG_BR0_PRELIM		0xff801001
-#define CFG_BR1_PRELIM		0xff001001
+#define CONFIG_SYS_BR0_PRELIM		0xff801001
+#define CONFIG_SYS_BR1_PRELIM		0xff001001
 
-#define	CFG_OR0_PRELIM		0xff806e65
-#define	CFG_OR1_PRELIM		0xff806e65
+#define	CONFIG_SYS_OR0_PRELIM		0xff806e65
+#define	CONFIG_SYS_OR1_PRELIM		0xff806e65
 
-#define CFG_FLASH_BANKS_LIST	{0xff800000, CFG_FLASH_BASE}
-#define CFG_MAX_FLASH_BANKS	2		/* number of banks */
-#define CFG_MAX_FLASH_SECT	128		/* sectors per device */
-#undef	CFG_FLASH_CHECKSUM
-#define CFG_FLASH_ERASE_TOUT	60000	/* Flash Erase Timeout (ms) */
-#define CFG_FLASH_WRITE_TOUT	500	/* Flash Write Timeout (ms) */
+#define CONFIG_SYS_FLASH_BANKS_LIST	{0xff800000, CONFIG_SYS_FLASH_BASE}
+#define CONFIG_SYS_MAX_FLASH_BANKS	2		/* number of banks */
+#define CONFIG_SYS_MAX_FLASH_SECT	128		/* sectors per device */
+#undef	CONFIG_SYS_FLASH_CHECKSUM
+#define CONFIG_SYS_FLASH_ERASE_TOUT	60000	/* Flash Erase Timeout (ms) */
+#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Flash Write Timeout (ms) */
 
-#define CFG_MONITOR_BASE	TEXT_BASE	/* start of monitor */
+#define CONFIG_SYS_MONITOR_BASE	TEXT_BASE	/* start of monitor */
 
 #define CONFIG_FLASH_CFI_DRIVER
-#define CFG_FLASH_CFI
-#define CFG_FLASH_EMPTY_INFO
+#define CONFIG_SYS_FLASH_CFI
+#define CONFIG_SYS_FLASH_EMPTY_INFO
 
 
 /*
  * SDRAM on the Local Bus
  */
-#define CFG_LBC_CACHE_BASE	0xf0000000	/* Localbus cacheable */
-#define CFG_LBC_CACHE_SIZE	64
-#define CFG_LBC_NONCACHE_BASE	0xf8000000	/* Localbus non-cacheable */
-#define CFG_LBC_NONCACHE_SIZE	64
+#define CONFIG_SYS_LBC_CACHE_BASE	0xf0000000	/* Localbus cacheable */
+#define CONFIG_SYS_LBC_CACHE_SIZE	64
+#define CONFIG_SYS_LBC_NONCACHE_BASE	0xf8000000	/* Localbus non-cacheable */
+#define CONFIG_SYS_LBC_NONCACHE_SIZE	64
 
-#define CFG_LBC_SDRAM_BASE	CFG_LBC_CACHE_BASE	/* Localbus SDRAM */
-#define CFG_LBC_SDRAM_SIZE	64		/* LBC SDRAM is 64MB */
+#define CONFIG_SYS_LBC_SDRAM_BASE	CONFIG_SYS_LBC_CACHE_BASE	/* Localbus SDRAM */
+#define CONFIG_SYS_LBC_SDRAM_SIZE	64		/* LBC SDRAM is 64MB */
 
 /*
  * Base Register 2 and Option Register 2 configure SDRAM.
- * The SDRAM base address, CFG_LBC_SDRAM_BASE, is 0xf0000000.
+ * The SDRAM base address, CONFIG_SYS_LBC_SDRAM_BASE, is 0xf0000000.
  *
  * For BR2, need:
  *    Base address of 0xf0000000 = BR[0:16] = 1111 0000 0000 0000 0
@@ -202,14 +201,14 @@ extern unsigned long get_clock_freq(void);
  * 0	4    8	  12   16   20	 24   28
  * 1111 0000 0000 0000 0001 1000 0110 0001 = f0001861
  *
- * FIXME: CFG_LBC_SDRAM_BASE should be masked and OR'ed into
+ * FIXME: CONFIG_SYS_LBC_SDRAM_BASE should be masked and OR'ed into
  * FIXME: the top 17 bits of BR2.
  */
 
-#define CFG_BR2_PRELIM		0xf0001861
+#define CONFIG_SYS_BR2_PRELIM		0xf0001861
 
 /*
- * The SDRAM size in MB, CFG_LBC_SDRAM_SIZE, is 64.
+ * The SDRAM size in MB, CONFIG_SYS_LBC_SDRAM_SIZE, is 64.
  *
  * For OR2, need:
  *    64MB mask for AM, OR2[0:7] = 1111 1100
@@ -222,35 +221,35 @@ extern unsigned long get_clock_freq(void);
  * 1111 1100 0000 0000 0110 1001 0000 0001 = fc006901
  */
 
-#define CFG_OR2_PRELIM		0xfc006901
+#define CONFIG_SYS_OR2_PRELIM		0xfc006901
 
-#define CFG_LBC_LCRR		0x00030004	/* LB clock ratio reg */
-#define CFG_LBC_LBCR		0x00000000	/* LB config reg */
-#define CFG_LBC_LSRT		0x20000000	/* LB sdram refresh timer */
-#define CFG_LBC_MRTPR		0x00000000	/* LB refresh timer prescal*/
+#define CONFIG_SYS_LBC_LCRR		0x00030004	/* LB clock ratio reg */
+#define CONFIG_SYS_LBC_LBCR		0x00000000	/* LB config reg */
+#define CONFIG_SYS_LBC_LSRT		0x20000000	/* LB sdram refresh timer */
+#define CONFIG_SYS_LBC_MRTPR		0x00000000	/* LB refresh timer prescal*/
 
 /*
  * LSDMR masks
  */
-#define CFG_LBC_LSDMR_RFEN	(1 << (31 -  1))
-#define CFG_LBC_LSDMR_BSMA1516	(3 << (31 - 10))
-#define CFG_LBC_LSDMR_BSMA1617	(4 << (31 - 10))
-#define CFG_LBC_LSDMR_RFCR16	(7 << (31 - 16))
-#define CFG_LBC_LSDMR_PRETOACT7	(7 << (31 - 19))
-#define CFG_LBC_LSDMR_ACTTORW7	(7 << (31 - 22))
-#define CFG_LBC_LSDMR_ACTTORW6	(6 << (31 - 22))
-#define CFG_LBC_LSDMR_BL8	(1 << (31 - 23))
-#define CFG_LBC_LSDMR_WRC4	(0 << (31 - 27))
-#define CFG_LBC_LSDMR_CL3	(3 << (31 - 31))
-
-#define CFG_LBC_LSDMR_OP_NORMAL	(0 << (31 - 4))
-#define CFG_LBC_LSDMR_OP_ARFRSH	(1 << (31 - 4))
-#define CFG_LBC_LSDMR_OP_SRFRSH	(2 << (31 - 4))
-#define CFG_LBC_LSDMR_OP_MRW	(3 << (31 - 4))
-#define CFG_LBC_LSDMR_OP_PRECH	(4 << (31 - 4))
-#define CFG_LBC_LSDMR_OP_PCHALL	(5 << (31 - 4))
-#define CFG_LBC_LSDMR_OP_ACTBNK	(6 << (31 - 4))
-#define CFG_LBC_LSDMR_OP_RWINV	(7 << (31 - 4))
+#define CONFIG_SYS_LBC_LSDMR_RFEN	(1 << (31 -  1))
+#define CONFIG_SYS_LBC_LSDMR_BSMA1516	(3 << (31 - 10))
+#define CONFIG_SYS_LBC_LSDMR_BSMA1617	(4 << (31 - 10))
+#define CONFIG_SYS_LBC_LSDMR_RFCR16	(7 << (31 - 16))
+#define CONFIG_SYS_LBC_LSDMR_PRETOACT7	(7 << (31 - 19))
+#define CONFIG_SYS_LBC_LSDMR_ACTTORW7	(7 << (31 - 22))
+#define CONFIG_SYS_LBC_LSDMR_ACTTORW6	(6 << (31 - 22))
+#define CONFIG_SYS_LBC_LSDMR_BL8	(1 << (31 - 23))
+#define CONFIG_SYS_LBC_LSDMR_WRC4	(0 << (31 - 27))
+#define CONFIG_SYS_LBC_LSDMR_CL3	(3 << (31 - 31))
+
+#define CONFIG_SYS_LBC_LSDMR_OP_NORMAL	(0 << (31 - 4))
+#define CONFIG_SYS_LBC_LSDMR_OP_ARFRSH	(1 << (31 - 4))
+#define CONFIG_SYS_LBC_LSDMR_OP_SRFRSH	(2 << (31 - 4))
+#define CONFIG_SYS_LBC_LSDMR_OP_MRW	(3 << (31 - 4))
+#define CONFIG_SYS_LBC_LSDMR_OP_PRECH	(4 << (31 - 4))
+#define CONFIG_SYS_LBC_LSDMR_OP_PCHALL	(5 << (31 - 4))
+#define CONFIG_SYS_LBC_LSDMR_OP_ACTBNK	(6 << (31 - 4))
+#define CONFIG_SYS_LBC_LSDMR_OP_RWINV	(7 << (31 - 4))
 
 /*
  * Common settings for all Local Bus SDRAM commands.
@@ -258,13 +257,13 @@ extern unsigned long get_clock_freq(void);
  *		    or BSMA1617 (for CPU 1.0) (old)
  * is OR'ed in too.
  */
-#define CFG_LBC_LSDMR_COMMON	( CFG_LBC_LSDMR_RFCR16		\
-				| CFG_LBC_LSDMR_PRETOACT7	\
-				| CFG_LBC_LSDMR_ACTTORW7	\
-				| CFG_LBC_LSDMR_BL8		\
-				| CFG_LBC_LSDMR_WRC4		\
-				| CFG_LBC_LSDMR_CL3		\
-				| CFG_LBC_LSDMR_RFEN		\
+#define CONFIG_SYS_LBC_LSDMR_COMMON	( CONFIG_SYS_LBC_LSDMR_RFCR16		\
+				| CONFIG_SYS_LBC_LSDMR_PRETOACT7	\
+				| CONFIG_SYS_LBC_LSDMR_ACTTORW7	\
+				| CONFIG_SYS_LBC_LSDMR_BL8		\
+				| CONFIG_SYS_LBC_LSDMR_WRC4		\
+				| CONFIG_SYS_LBC_LSDMR_CL3		\
+				| CONFIG_SYS_LBC_LSDMR_RFEN		\
 				)
 
 /*
@@ -300,41 +299,40 @@ extern unsigned long get_clock_freq(void);
 #define CONFIG_FSL_CADMUS
 
 #define CADMUS_BASE_ADDR 0xf8000000
-#define CFG_BR3_PRELIM	 0xf8000801
-#define CFG_OR3_PRELIM	 0xfff00ff7
+#define CONFIG_SYS_BR3_PRELIM	 0xf8000801
+#define CONFIG_SYS_OR3_PRELIM	 0xfff00ff7
 
-#define CONFIG_L1_INIT_RAM
-#define CFG_INIT_RAM_LOCK	1
-#define CFG_INIT_RAM_ADDR	0xe4010000	/* Initial RAM address */
-#define CFG_INIT_RAM_END	0x4000		/* End of used area in RAM */
+#define CONFIG_SYS_INIT_RAM_LOCK	1
+#define CONFIG_SYS_INIT_RAM_ADDR	0xe4010000	/* Initial RAM address */
+#define CONFIG_SYS_INIT_RAM_END	0x4000		/* End of used area in RAM */
 
-#define CFG_INIT_L2_ADDR	0xf8f80000	/* relocate boot L2SRAM */
+#define CONFIG_SYS_INIT_L2_ADDR	0xf8f80000	/* relocate boot L2SRAM */
 
-#define CFG_GBL_DATA_SIZE	128		/* num bytes initial data */
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_GBL_DATA_SIZE	128		/* num bytes initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
-#define CFG_MONITOR_LEN		(256 * 1024) /* Reserve 256 kB for Mon */
-#define CFG_MALLOC_LEN		(128 * 1024)	/* Reserved for malloc */
+#define CONFIG_SYS_MONITOR_LEN		(256 * 1024) /* Reserve 256 kB for Mon */
+#define CONFIG_SYS_MALLOC_LEN		(128 * 1024)	/* Reserved for malloc */
 
 /* Serial Port */
 #define CONFIG_CONS_INDEX	2
 #undef	CONFIG_SERIAL_SOFTWARE_FIFO
-#define CFG_NS16550
-#define CFG_NS16550_SERIAL
-#define CFG_NS16550_REG_SIZE	1
-#define CFG_NS16550_CLK		get_bus_freq(0)
+#define CONFIG_SYS_NS16550
+#define CONFIG_SYS_NS16550_SERIAL
+#define CONFIG_SYS_NS16550_REG_SIZE	1
+#define CONFIG_SYS_NS16550_CLK		get_bus_freq(0)
 
-#define CFG_BAUDRATE_TABLE \
+#define CONFIG_SYS_BAUDRATE_TABLE \
 	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200}
 
-#define CFG_NS16550_COM1	(CFG_CCSRBAR+0x4500)
-#define CFG_NS16550_COM2	(CFG_CCSRBAR+0x4600)
+#define CONFIG_SYS_NS16550_COM1	(CONFIG_SYS_CCSRBAR+0x4500)
+#define CONFIG_SYS_NS16550_COM2	(CONFIG_SYS_CCSRBAR+0x4600)
 
 /* Use the HUSH parser */
-#define CFG_HUSH_PARSER
-#ifdef	CFG_HUSH_PARSER
-#define CFG_PROMPT_HUSH_PS2 "> "
+#define CONFIG_SYS_HUSH_PARSER
+#ifdef	CONFIG_SYS_HUSH_PARSER
+#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
 #endif
 
 /* pass open firmware flat tree */
@@ -342,8 +340,8 @@ extern unsigned long get_clock_freq(void);
 #define CONFIG_OF_BOARD_SETUP		1
 #define CONFIG_OF_STDOUT_VIA_ALIAS	1
 
-#define CFG_64BIT_VSPRINTF	1
-#define CFG_64BIT_STRTOUL	1
+#define CONFIG_SYS_64BIT_VSPRINTF	1
+#define CONFIG_SYS_64BIT_STRTOUL	1
 
 /*
  * I2C
@@ -351,49 +349,55 @@ extern unsigned long get_clock_freq(void);
 #define CONFIG_FSL_I2C		/* Use FSL common I2C driver */
 #define CONFIG_HARD_I2C		/* I2C with hardware support*/
 #undef	CONFIG_SOFT_I2C		/* I2C bit-banged */
-#define CFG_I2C_SPEED		400000	/* I2C speed and slave address */
-#define CFG_I2C_EEPROM_ADDR	0x57
-#define CFG_I2C_SLAVE		0x7F
-#define CFG_I2C_NOPROBES	{0x69}	/* Don't probe these addrs */
-#define CFG_I2C_OFFSET		0x3000
+#define CONFIG_SYS_I2C_SPEED		400000	/* I2C speed and slave address */
+#define CONFIG_SYS_I2C_SLAVE		0x7F
+#define CONFIG_SYS_I2C_NOPROBES	{0x69}	/* Don't probe these addrs */
+#define CONFIG_SYS_I2C_OFFSET		0x3000
+
+/* EEPROM */
+#define CONFIG_ID_EEPROM
+#define CONFIG_SYS_I2C_EEPROM_CCID
+#define CONFIG_SYS_ID_EEPROM
+#define CONFIG_SYS_I2C_EEPROM_ADDR     0x57
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
 
 /*
  * General PCI
  * Memory space is mapped 1-1, but I/O space must start from 0.
  */
-#define CFG_PCI_PHYS		0x80000000	/* 1G PCI TLB */
+#define CONFIG_SYS_PCI_PHYS		0x80000000	/* 1G PCI TLB */
 
-#define CFG_PCI1_MEM_BASE	0x80000000
-#define CFG_PCI1_MEM_PHYS	CFG_PCI1_MEM_BASE
-#define CFG_PCI1_MEM_SIZE	0x20000000	/* 512M */
-#define CFG_PCI1_IO_BASE	0x00000000
-#define CFG_PCI1_IO_PHYS	0xe2000000
-#define CFG_PCI1_IO_SIZE	0x00100000	/* 1M */
+#define CONFIG_SYS_PCI1_MEM_BASE	0x80000000
+#define CONFIG_SYS_PCI1_MEM_PHYS	CONFIG_SYS_PCI1_MEM_BASE
+#define CONFIG_SYS_PCI1_MEM_SIZE	0x20000000	/* 512M */
+#define CONFIG_SYS_PCI1_IO_BASE	0x00000000
+#define CONFIG_SYS_PCI1_IO_PHYS	0xe2000000
+#define CONFIG_SYS_PCI1_IO_SIZE	0x00100000	/* 1M */
 
 #ifdef CONFIG_PCI2
-#define CFG_PCI2_MEM_BASE	0xa0000000
-#define CFG_PCI2_MEM_PHYS	CFG_PCI2_MEM_BASE
-#define CFG_PCI2_MEM_SIZE	0x20000000	/* 512M */
-#define CFG_PCI2_IO_BASE	0x00000000
-#define CFG_PCI2_IO_PHYS	0xe2800000
-#define CFG_PCI2_IO_SIZE	0x00100000	/* 1M */
+#define CONFIG_SYS_PCI2_MEM_BASE	0xa0000000
+#define CONFIG_SYS_PCI2_MEM_PHYS	CONFIG_SYS_PCI2_MEM_BASE
+#define CONFIG_SYS_PCI2_MEM_SIZE	0x20000000	/* 512M */
+#define CONFIG_SYS_PCI2_IO_BASE	0x00000000
+#define CONFIG_SYS_PCI2_IO_PHYS	0xe2800000
+#define CONFIG_SYS_PCI2_IO_SIZE	0x00100000	/* 1M */
 #endif
 
 #ifdef CONFIG_PCIE1
-#define CFG_PCIE1_MEM_BASE	0xa0000000
-#define CFG_PCIE1_MEM_PHYS	CFG_PCIE1_MEM_BASE
-#define CFG_PCIE1_MEM_SIZE	0x20000000	/* 512M */
-#define CFG_PCIE1_IO_BASE	0x00000000
-#define CFG_PCIE1_IO_PHYS	0xe3000000
-#define CFG_PCIE1_IO_SIZE	0x00100000	/*   1M */
+#define CONFIG_SYS_PCIE1_MEM_BASE	0xa0000000
+#define CONFIG_SYS_PCIE1_MEM_PHYS	CONFIG_SYS_PCIE1_MEM_BASE
+#define CONFIG_SYS_PCIE1_MEM_SIZE	0x20000000	/* 512M */
+#define CONFIG_SYS_PCIE1_IO_BASE	0x00000000
+#define CONFIG_SYS_PCIE1_IO_PHYS	0xe3000000
+#define CONFIG_SYS_PCIE1_IO_SIZE	0x00100000	/*   1M */
 #endif
 
 #ifdef CONFIG_RIO
 /*
  * RapidIO MMU
  */
-#define CFG_RIO_MEM_BASE	0xC0000000
-#define CFG_RIO_MEM_SIZE	0x20000000	/* 512M */
+#define CONFIG_SYS_RIO_MEM_BASE	0xC0000000
+#define CONFIG_SYS_RIO_MEM_SIZE	0x20000000	/* 512M */
 #endif
 
 #ifdef CONFIG_LEGACY
@@ -414,11 +418,6 @@ extern unsigned long get_clock_freq(void);
 
 #undef CONFIG_PCI_SCAN_SHOW		/* show pci devices on startup */
 
-/* PCI view of System Memory */
-#define CFG_PCI_MEMORY_BUS	0x00000000
-#define CFG_PCI_MEMORY_PHYS	0x00000000
-#define CFG_PCI_MEMORY_SIZE	0x80000000
-
 #endif	/* CONFIG_PCI */
 
 
@@ -461,13 +460,13 @@ extern unsigned long get_clock_freq(void);
 /*
  * Environment
  */
-#define CFG_ENV_IS_IN_FLASH	1
-#define CFG_ENV_ADDR		(CFG_MONITOR_BASE + 0x40000)
-#define CFG_ENV_SECT_SIZE	0x40000	/* 256K(one sector) for env */
-#define CFG_ENV_SIZE		0x2000
+#define CONFIG_ENV_IS_IN_FLASH	1
+#define CONFIG_ENV_ADDR		(CONFIG_SYS_MONITOR_BASE + 0x40000)
+#define CONFIG_ENV_SECT_SIZE	0x40000	/* 256K(one sector) for env */
+#define CONFIG_ENV_SIZE		0x2000
 
 #define CONFIG_LOADS_ECHO	1	/* echo on for serial download */
-#define CFG_LOADS_BAUD_CHANGE	1	/* allow baudrate change */
+#define CONFIG_SYS_LOADS_BAUD_CHANGE	1	/* allow baudrate change */
 
 /*
  * BOOTP options
@@ -487,6 +486,8 @@ extern unsigned long get_clock_freq(void);
 #define CONFIG_CMD_I2C
 #define CONFIG_CMD_MII
 #define CONFIG_CMD_ELF
+#define CONFIG_CMD_IRQ
+#define CONFIG_CMD_SETEXPR
 
 #if defined(CONFIG_PCI)
     #define CONFIG_CMD_PCI
@@ -498,26 +499,26 @@ extern unsigned long get_clock_freq(void);
 /*
  * Miscellaneous configurable options
  */
-#define CFG_LONGHELP			/* undef to save memory	*/
+#define CONFIG_SYS_LONGHELP			/* undef to save memory	*/
 #define CONFIG_CMDLINE_EDITING		/* Command-line editing */
-#define CFG_LOAD_ADDR	0x2000000	/* default load address */
-#define CFG_PROMPT	"=> "		/* Monitor Command Prompt */
+#define CONFIG_SYS_LOAD_ADDR	0x2000000	/* default load address */
+#define CONFIG_SYS_PROMPT	"=> "		/* Monitor Command Prompt */
 #if defined(CONFIG_CMD_KGDB)
-#define CFG_CBSIZE	1024		/* Console I/O Buffer Size */
+#define CONFIG_SYS_CBSIZE	1024		/* Console I/O Buffer Size */
 #else
-#define CFG_CBSIZE	256		/* Console I/O Buffer Size */
+#define CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size */
 #endif
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define CFG_MAXARGS	16		/* max number of command args */
-#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size */
-#define CFG_HZ		1000		/* decrementer freq: 1ms ticks */
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS	16		/* max number of command args */
+#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size */
+#define CONFIG_SYS_HZ		1000		/* decrementer freq: 1ms ticks */
 
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define CFG_BOOTMAPSZ	(8 << 20)	/* Initial Memory map for Linux*/
+#define CONFIG_SYS_BOOTMAPSZ	(8 << 20)	/* Initial Memory map for Linux*/
 
 /*
  * Internal Definitions
diff --git a/include/configs/MPC8555CDS.h b/include/configs/MPC8555CDS.h
index c07a725f9..c92f82d48 100644
--- a/include/configs/MPC8555CDS.h
+++ b/include/configs/MPC8555CDS.h
@@ -38,12 +38,13 @@
 #define CONFIG_MPC8555CDS	1	/* MPC8555CDS board specific */
 
 #define CONFIG_PCI
+#define CONFIG_SYS_PCI_64BIT	1	/* enable 64-bit PCI resources */
 #define CONFIG_TSEC_ENET		/* tsec ethernet support */
 #define CONFIG_ENV_OVERWRITE
 #define CONFIG_FSL_LAW		1	/* Use common FSL init code */
 
 #define CONFIG_FSL_VIA
-#define CONFIG_FSL_CDS_EEPROM
+
 
 /*
  * When initializing flash, if we cannot find the manufacturer ID,
@@ -62,19 +63,18 @@ extern unsigned long get_clock_freq(void);
  */
 #define CONFIG_L2_CACHE			    /* toggle L2 cache	*/
 #define CONFIG_BTB			    /* toggle branch predition */
-#define CONFIG_ADDR_STREAMING		    /* toggle addr streaming   */
 
-#define CFG_MEMTEST_START	0x00200000	/* memtest works on */
-#define CFG_MEMTEST_END		0x00400000
+#define CONFIG_SYS_MEMTEST_START	0x00200000	/* memtest works on */
+#define CONFIG_SYS_MEMTEST_END		0x00400000
 
 /*
  * Base addresses -- Note these are effective addresses where the
  * actual resources get mapped (not physical addresses)
  */
-#define CFG_CCSRBAR_DEFAULT	0xff700000	/* CCSRBAR Default */
-#define CFG_CCSRBAR		0xe0000000	/* relocated CCSRBAR */
-#define CFG_CCSRBAR_PHYS	CFG_CCSRBAR	/* physical addr of CCSRBAR */
-#define CFG_IMMR		CFG_CCSRBAR	/* PQII uses CFG_IMMR */
+#define CONFIG_SYS_CCSRBAR_DEFAULT	0xff700000	/* CCSRBAR Default */
+#define CONFIG_SYS_CCSRBAR		0xe0000000	/* relocated CCSRBAR */
+#define CONFIG_SYS_CCSRBAR_PHYS	CONFIG_SYS_CCSRBAR	/* physical addr of CCSRBAR */
+#define CONFIG_SYS_IMMR		CONFIG_SYS_CCSRBAR	/* PQII uses CONFIG_SYS_IMMR */
 
 /* DDR Setup */
 #define CONFIG_FSL_DDR1
@@ -84,8 +84,8 @@ extern unsigned long get_clock_freq(void);
 
 #define CONFIG_MEM_INIT_VALUE		0xDeadBeef
 
-#define CFG_DDR_SDRAM_BASE	0x00000000	/* DDR is system memory*/
-#define CFG_SDRAM_BASE		CFG_DDR_SDRAM_BASE
+#define CONFIG_SYS_DDR_SDRAM_BASE	0x00000000	/* DDR is system memory*/
+#define CONFIG_SYS_SDRAM_BASE		CONFIG_SYS_DDR_SDRAM_BASE
 
 #define CONFIG_NUM_DDR_CONTROLLERS	1
 #define CONFIG_DIMM_SLOTS_PER_CTLR	1
@@ -135,37 +135,37 @@ extern unsigned long get_clock_freq(void);
  * 1111 1111 1000 0000 0110 1110 0110 0101 = ff806e65    ORx
  */
 
-#define CFG_FLASH_BASE		0xff000000	/* start of FLASH 8M */
+#define CONFIG_SYS_FLASH_BASE		0xff000000	/* start of FLASH 8M */
 
-#define CFG_BR0_PRELIM		0xff801001
-#define CFG_BR1_PRELIM		0xff001001
+#define CONFIG_SYS_BR0_PRELIM		0xff801001
+#define CONFIG_SYS_BR1_PRELIM		0xff001001
 
-#define	CFG_OR0_PRELIM		0xff806e65
-#define	CFG_OR1_PRELIM		0xff806e65
+#define	CONFIG_SYS_OR0_PRELIM		0xff806e65
+#define	CONFIG_SYS_OR1_PRELIM		0xff806e65
 
-#define CFG_FLASH_BANKS_LIST	{0xff800000, CFG_FLASH_BASE}
-#define CFG_MAX_FLASH_BANKS	2		/* number of banks */
-#define CFG_MAX_FLASH_SECT	128		/* sectors per device */
-#undef	CFG_FLASH_CHECKSUM
-#define CFG_FLASH_ERASE_TOUT	60000	/* Flash Erase Timeout (ms) */
-#define CFG_FLASH_WRITE_TOUT	500	/* Flash Write Timeout (ms) */
+#define CONFIG_SYS_FLASH_BANKS_LIST	{0xff800000, CONFIG_SYS_FLASH_BASE}
+#define CONFIG_SYS_MAX_FLASH_BANKS	2		/* number of banks */
+#define CONFIG_SYS_MAX_FLASH_SECT	128		/* sectors per device */
+#undef	CONFIG_SYS_FLASH_CHECKSUM
+#define CONFIG_SYS_FLASH_ERASE_TOUT	60000	/* Flash Erase Timeout (ms) */
+#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Flash Write Timeout (ms) */
 
-#define CFG_MONITOR_BASE	TEXT_BASE	/* start of monitor */
+#define CONFIG_SYS_MONITOR_BASE	TEXT_BASE	/* start of monitor */
 
 #define CONFIG_FLASH_CFI_DRIVER
-#define CFG_FLASH_CFI
-#define CFG_FLASH_EMPTY_INFO
+#define CONFIG_SYS_FLASH_CFI
+#define CONFIG_SYS_FLASH_EMPTY_INFO
 
 
 /*
  * SDRAM on the Local Bus
  */
-#define CFG_LBC_SDRAM_BASE	0xf0000000	/* Localbus SDRAM */
-#define CFG_LBC_SDRAM_SIZE	64		/* LBC SDRAM is 64MB */
+#define CONFIG_SYS_LBC_SDRAM_BASE	0xf0000000	/* Localbus SDRAM */
+#define CONFIG_SYS_LBC_SDRAM_SIZE	64		/* LBC SDRAM is 64MB */
 
 /*
  * Base Register 2 and Option Register 2 configure SDRAM.
- * The SDRAM base address, CFG_LBC_SDRAM_BASE, is 0xf0000000.
+ * The SDRAM base address, CONFIG_SYS_LBC_SDRAM_BASE, is 0xf0000000.
  *
  * For BR2, need:
  *    Base address of 0xf0000000 = BR[0:16] = 1111 0000 0000 0000 0
@@ -177,14 +177,14 @@ extern unsigned long get_clock_freq(void);
  * 0    4    8    12   16   20   24   28
  * 1111 0000 0000 0000 0001 1000 0110 0001 = f0001861
  *
- * FIXME: CFG_LBC_SDRAM_BASE should be masked and OR'ed into
+ * FIXME: CONFIG_SYS_LBC_SDRAM_BASE should be masked and OR'ed into
  * FIXME: the top 17 bits of BR2.
  */
 
-#define CFG_BR2_PRELIM          0xf0001861
+#define CONFIG_SYS_BR2_PRELIM          0xf0001861
 
 /*
- * The SDRAM size in MB, CFG_LBC_SDRAM_SIZE, is 64.
+ * The SDRAM size in MB, CONFIG_SYS_LBC_SDRAM_SIZE, is 64.
  *
  * For OR2, need:
  *    64MB mask for AM, OR2[0:7] = 1111 1100
@@ -197,35 +197,35 @@ extern unsigned long get_clock_freq(void);
  * 1111 1100 0000 0000 0110 1001 0000 0001 = fc006901
  */
 
-#define CFG_OR2_PRELIM		0xfc006901
+#define CONFIG_SYS_OR2_PRELIM		0xfc006901
 
-#define CFG_LBC_LCRR		0x00030004    /* LB clock ratio reg */
-#define CFG_LBC_LBCR		0x00000000    /* LB config reg */
-#define CFG_LBC_LSRT		0x20000000  /* LB sdram refresh timer */
-#define CFG_LBC_MRTPR		0x00000000  /* LB refresh timer prescal*/
+#define CONFIG_SYS_LBC_LCRR		0x00030004    /* LB clock ratio reg */
+#define CONFIG_SYS_LBC_LBCR		0x00000000    /* LB config reg */
+#define CONFIG_SYS_LBC_LSRT		0x20000000  /* LB sdram refresh timer */
+#define CONFIG_SYS_LBC_MRTPR		0x00000000  /* LB refresh timer prescal*/
 
 /*
  * LSDMR masks
  */
-#define CFG_LBC_LSDMR_RFEN	(1 << (31 -  1))
-#define CFG_LBC_LSDMR_BSMA1516	(3 << (31 - 10))
-#define CFG_LBC_LSDMR_BSMA1617	(4 << (31 - 10))
-#define CFG_LBC_LSDMR_RFCR16	(7 << (31 - 16))
-#define CFG_LBC_LSDMR_PRETOACT7	(7 << (31 - 19))
-#define CFG_LBC_LSDMR_ACTTORW7	(7 << (31 - 22))
-#define CFG_LBC_LSDMR_ACTTORW6	(6 << (31 - 22))
-#define CFG_LBC_LSDMR_BL8	(1 << (31 - 23))
-#define CFG_LBC_LSDMR_WRC4	(0 << (31 - 27))
-#define CFG_LBC_LSDMR_CL3	(3 << (31 - 31))
-
-#define CFG_LBC_LSDMR_OP_NORMAL	(0 << (31 - 4))
-#define CFG_LBC_LSDMR_OP_ARFRSH	(1 << (31 - 4))
-#define CFG_LBC_LSDMR_OP_SRFRSH	(2 << (31 - 4))
-#define CFG_LBC_LSDMR_OP_MRW	(3 << (31 - 4))
-#define CFG_LBC_LSDMR_OP_PRECH	(4 << (31 - 4))
-#define CFG_LBC_LSDMR_OP_PCHALL	(5 << (31 - 4))
-#define CFG_LBC_LSDMR_OP_ACTBNK	(6 << (31 - 4))
-#define CFG_LBC_LSDMR_OP_RWINV	(7 << (31 - 4))
+#define CONFIG_SYS_LBC_LSDMR_RFEN	(1 << (31 -  1))
+#define CONFIG_SYS_LBC_LSDMR_BSMA1516	(3 << (31 - 10))
+#define CONFIG_SYS_LBC_LSDMR_BSMA1617	(4 << (31 - 10))
+#define CONFIG_SYS_LBC_LSDMR_RFCR16	(7 << (31 - 16))
+#define CONFIG_SYS_LBC_LSDMR_PRETOACT7	(7 << (31 - 19))
+#define CONFIG_SYS_LBC_LSDMR_ACTTORW7	(7 << (31 - 22))
+#define CONFIG_SYS_LBC_LSDMR_ACTTORW6	(6 << (31 - 22))
+#define CONFIG_SYS_LBC_LSDMR_BL8	(1 << (31 - 23))
+#define CONFIG_SYS_LBC_LSDMR_WRC4	(0 << (31 - 27))
+#define CONFIG_SYS_LBC_LSDMR_CL3	(3 << (31 - 31))
+
+#define CONFIG_SYS_LBC_LSDMR_OP_NORMAL	(0 << (31 - 4))
+#define CONFIG_SYS_LBC_LSDMR_OP_ARFRSH	(1 << (31 - 4))
+#define CONFIG_SYS_LBC_LSDMR_OP_SRFRSH	(2 << (31 - 4))
+#define CONFIG_SYS_LBC_LSDMR_OP_MRW	(3 << (31 - 4))
+#define CONFIG_SYS_LBC_LSDMR_OP_PRECH	(4 << (31 - 4))
+#define CONFIG_SYS_LBC_LSDMR_OP_PCHALL	(5 << (31 - 4))
+#define CONFIG_SYS_LBC_LSDMR_OP_ACTBNK	(6 << (31 - 4))
+#define CONFIG_SYS_LBC_LSDMR_OP_RWINV	(7 << (31 - 4))
 
 /*
  * Common settings for all Local Bus SDRAM commands.
@@ -233,13 +233,13 @@ extern unsigned long get_clock_freq(void);
  *                  or BSMA1617 (for CPU 1.0) (old)
  * is OR'ed in too.
  */
-#define CFG_LBC_LSDMR_COMMON	( CFG_LBC_LSDMR_RFCR16		\
-				| CFG_LBC_LSDMR_PRETOACT7	\
-				| CFG_LBC_LSDMR_ACTTORW7	\
-				| CFG_LBC_LSDMR_BL8		\
-				| CFG_LBC_LSDMR_WRC4		\
-				| CFG_LBC_LSDMR_CL3		\
-				| CFG_LBC_LSDMR_RFEN		\
+#define CONFIG_SYS_LBC_LSDMR_COMMON	( CONFIG_SYS_LBC_LSDMR_RFCR16		\
+				| CONFIG_SYS_LBC_LSDMR_PRETOACT7	\
+				| CONFIG_SYS_LBC_LSDMR_ACTTORW7	\
+				| CONFIG_SYS_LBC_LSDMR_BL8		\
+				| CONFIG_SYS_LBC_LSDMR_WRC4		\
+				| CONFIG_SYS_LBC_LSDMR_CL3		\
+				| CONFIG_SYS_LBC_LSDMR_RFEN		\
 				)
 
 /*
@@ -275,39 +275,38 @@ extern unsigned long get_clock_freq(void);
 #define CONFIG_FSL_CADMUS
 
 #define CADMUS_BASE_ADDR 0xf8000000
-#define CFG_BR3_PRELIM   0xf8000801
-#define CFG_OR3_PRELIM   0xfff00ff7
+#define CONFIG_SYS_BR3_PRELIM   0xf8000801
+#define CONFIG_SYS_OR3_PRELIM   0xfff00ff7
 
-#define CONFIG_L1_INIT_RAM
-#define CFG_INIT_RAM_LOCK	1
-#define CFG_INIT_RAM_ADDR	0xe4010000	/* Initial RAM address */
-#define CFG_INIT_RAM_END	0x4000	    /* End of used area in RAM */
+#define CONFIG_SYS_INIT_RAM_LOCK	1
+#define CONFIG_SYS_INIT_RAM_ADDR	0xe4010000	/* Initial RAM address */
+#define CONFIG_SYS_INIT_RAM_END	0x4000	    /* End of used area in RAM */
 
-#define CFG_GBL_DATA_SIZE	128	    /* num bytes initial data */
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_GBL_DATA_SIZE	128	    /* num bytes initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
-#define CFG_MONITOR_LEN		(256 * 1024) /* Reserve 256 kB for Mon */
-#define CFG_MALLOC_LEN		(128 * 1024)	/* Reserved for malloc */
+#define CONFIG_SYS_MONITOR_LEN		(256 * 1024) /* Reserve 256 kB for Mon */
+#define CONFIG_SYS_MALLOC_LEN		(128 * 1024)	/* Reserved for malloc */
 
 /* Serial Port */
 #define CONFIG_CONS_INDEX     2
 #undef	CONFIG_SERIAL_SOFTWARE_FIFO
-#define CFG_NS16550
-#define CFG_NS16550_SERIAL
-#define CFG_NS16550_REG_SIZE    1
-#define CFG_NS16550_CLK		get_bus_freq(0)
+#define CONFIG_SYS_NS16550
+#define CONFIG_SYS_NS16550_SERIAL
+#define CONFIG_SYS_NS16550_REG_SIZE    1
+#define CONFIG_SYS_NS16550_CLK		get_bus_freq(0)
 
-#define CFG_BAUDRATE_TABLE  \
+#define CONFIG_SYS_BAUDRATE_TABLE  \
 	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200}
 
-#define CFG_NS16550_COM1        (CFG_CCSRBAR+0x4500)
-#define CFG_NS16550_COM2        (CFG_CCSRBAR+0x4600)
+#define CONFIG_SYS_NS16550_COM1        (CONFIG_SYS_CCSRBAR+0x4500)
+#define CONFIG_SYS_NS16550_COM2        (CONFIG_SYS_CCSRBAR+0x4600)
 
 /* Use the HUSH parser */
-#define CFG_HUSH_PARSER
-#ifdef  CFG_HUSH_PARSER
-#define CFG_PROMPT_HUSH_PS2 "> "
+#define CONFIG_SYS_HUSH_PARSER
+#ifdef  CONFIG_SYS_HUSH_PARSER
+#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
 #endif
 
 /* pass open firmware flat tree */
@@ -315,8 +314,8 @@ extern unsigned long get_clock_freq(void);
 #define CONFIG_OF_BOARD_SETUP		1
 #define CONFIG_OF_STDOUT_VIA_ALIAS	1
 
-#define CFG_64BIT_VSPRINTF	1
-#define CFG_64BIT_STRTOUL	1
+#define CONFIG_SYS_64BIT_VSPRINTF	1
+#define CONFIG_SYS_64BIT_STRTOUL	1
 
 /*
  * I2C
@@ -324,29 +323,35 @@ extern unsigned long get_clock_freq(void);
 #define CONFIG_FSL_I2C		/* Use FSL common I2C driver */
 #define CONFIG_HARD_I2C		/* I2C with hardware support*/
 #undef	CONFIG_SOFT_I2C			/* I2C bit-banged */
-#define CFG_I2C_SPEED		400000	/* I2C speed and slave address */
-#define CFG_I2C_EEPROM_ADDR	0x57
-#define CFG_I2C_SLAVE		0x7F
-#define CFG_I2C_NOPROBES        {0x69}	/* Don't probe these addrs */
-#define CFG_I2C_OFFSET		0x3000
+#define CONFIG_SYS_I2C_SPEED		400000	/* I2C speed and slave address */
+#define CONFIG_SYS_I2C_SLAVE		0x7F
+#define CONFIG_SYS_I2C_NOPROBES        {0x69}	/* Don't probe these addrs */
+#define CONFIG_SYS_I2C_OFFSET		0x3000
+
+/* EEPROM */
+#define CONFIG_ID_EEPROM
+#define CONFIG_SYS_I2C_EEPROM_CCID
+#define CONFIG_SYS_ID_EEPROM
+#define CONFIG_SYS_I2C_EEPROM_ADDR     0x57
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
 
 /*
  * General PCI
  * Addresses are mapped 1-1.
  */
-#define CFG_PCI1_MEM_BASE	0x80000000
-#define CFG_PCI1_MEM_PHYS	CFG_PCI1_MEM_BASE
-#define CFG_PCI1_MEM_SIZE	0x20000000	/* 512M */
-#define CFG_PCI1_IO_BASE	0x00000000
-#define CFG_PCI1_IO_PHYS	0xe2000000
-#define CFG_PCI1_IO_SIZE	0x00100000	/* 1M */
-
-#define CFG_PCI2_MEM_BASE	0xa0000000
-#define CFG_PCI2_MEM_PHYS	CFG_PCI2_MEM_BASE
-#define CFG_PCI2_MEM_SIZE	0x20000000	/* 512M */
-#define CFG_PCI2_IO_BASE	0x00000000
-#define CFG_PCI2_IO_PHYS	0xe2100000
-#define CFG_PCI2_IO_SIZE	0x00100000	/* 1M */
+#define CONFIG_SYS_PCI1_MEM_BASE	0x80000000
+#define CONFIG_SYS_PCI1_MEM_PHYS	CONFIG_SYS_PCI1_MEM_BASE
+#define CONFIG_SYS_PCI1_MEM_SIZE	0x20000000	/* 512M */
+#define CONFIG_SYS_PCI1_IO_BASE	0x00000000
+#define CONFIG_SYS_PCI1_IO_PHYS	0xe2000000
+#define CONFIG_SYS_PCI1_IO_SIZE	0x00100000	/* 1M */
+
+#define CONFIG_SYS_PCI2_MEM_BASE	0xa0000000
+#define CONFIG_SYS_PCI2_MEM_PHYS	CONFIG_SYS_PCI2_MEM_BASE
+#define CONFIG_SYS_PCI2_MEM_SIZE	0x20000000	/* 512M */
+#define CONFIG_SYS_PCI2_IO_BASE	0x00000000
+#define CONFIG_SYS_PCI2_IO_PHYS	0xe2100000
+#define CONFIG_SYS_PCI2_IO_SIZE	0x00100000	/* 1M */
 
 #ifdef CONFIG_LEGACY
 #define BRIDGE_ID 17
@@ -366,7 +371,7 @@ extern unsigned long get_clock_freq(void);
 #undef CONFIG_TULIP
 
 #define CONFIG_PCI_SCAN_SHOW		/* show pci devices on startup */
-#define CFG_PCI_SUBSYS_VENDORID 0x1057  /* Motorola */
+#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x1057  /* Motorola */
 
 #endif	/* CONFIG_PCI */
 
@@ -397,13 +402,13 @@ extern unsigned long get_clock_freq(void);
 /*
  * Environment
  */
-#define CFG_ENV_IS_IN_FLASH	1
-#define CFG_ENV_ADDR		(CFG_MONITOR_BASE + 0x40000)
-#define CFG_ENV_SECT_SIZE	0x40000	/* 256K(one sector) for env */
-#define CFG_ENV_SIZE		0x2000
+#define CONFIG_ENV_IS_IN_FLASH	1
+#define CONFIG_ENV_ADDR		(CONFIG_SYS_MONITOR_BASE + 0x40000)
+#define CONFIG_ENV_SECT_SIZE	0x40000	/* 256K(one sector) for env */
+#define CONFIG_ENV_SIZE		0x2000
 
 #define CONFIG_LOADS_ECHO	1	/* echo on for serial download */
-#define CFG_LOADS_BAUD_CHANGE	1	/* allow baudrate change */
+#define CONFIG_SYS_LOADS_BAUD_CHANGE	1	/* allow baudrate change */
 
 /*
  * BOOTP options
@@ -423,6 +428,8 @@ extern unsigned long get_clock_freq(void);
 #define CONFIG_CMD_I2C
 #define CONFIG_CMD_MII
 #define CONFIG_CMD_ELF
+#define CONFIG_CMD_IRQ
+#define CONFIG_CMD_SETEXPR
 
 #if defined(CONFIG_PCI)
     #define CONFIG_CMD_PCI
@@ -434,26 +441,26 @@ extern unsigned long get_clock_freq(void);
 /*
  * Miscellaneous configurable options
  */
-#define CFG_LONGHELP			/* undef to save memory	*/
+#define CONFIG_SYS_LONGHELP			/* undef to save memory	*/
 #define CONFIG_CMDLINE_EDITING		/* Command-line editing */
-#define CFG_LOAD_ADDR	0x2000000	/* default load address */
-#define CFG_PROMPT	"=> "		/* Monitor Command Prompt */
+#define CONFIG_SYS_LOAD_ADDR	0x2000000	/* default load address */
+#define CONFIG_SYS_PROMPT	"=> "		/* Monitor Command Prompt */
 #if defined(CONFIG_CMD_KGDB)
-#define CFG_CBSIZE	1024		/* Console I/O Buffer Size */
+#define CONFIG_SYS_CBSIZE	1024		/* Console I/O Buffer Size */
 #else
-#define CFG_CBSIZE	256		/* Console I/O Buffer Size */
+#define CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size */
 #endif
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define CFG_MAXARGS	16		/* max number of command args */
-#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size */
-#define CFG_HZ		1000		/* decrementer freq: 1ms ticks */
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS	16		/* max number of command args */
+#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size */
+#define CONFIG_SYS_HZ		1000		/* decrementer freq: 1ms ticks */
 
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define CFG_BOOTMAPSZ	(8 << 20)	/* Initial Memory map for Linux*/
+#define CONFIG_SYS_BOOTMAPSZ	(8 << 20)	/* Initial Memory map for Linux*/
 
 /*
  * Internal Definitions
diff --git a/include/configs/MPC8560ADS.h b/include/configs/MPC8560ADS.h
index a8e7c0a41..bf4bd2c1a 100644
--- a/include/configs/MPC8560ADS.h
+++ b/include/configs/MPC8560ADS.h
@@ -43,6 +43,7 @@
 #define CONFIG_MPC8560		1
 
 #define CONFIG_PCI
+#define CONFIG_SYS_PCI_64BIT	1	/* enable 64-bit PCI resources */
 #define CONFIG_TSEC_ENET		/* tsec ethernet support */
 #undef CONFIG_ETHER_ON_FCC             /* cpm FCC ethernet support */
 #define CONFIG_ENV_OVERWRITE
@@ -72,22 +73,21 @@
  */
 #define CONFIG_L2_CACHE			/* toggle L2 cache */
 #define CONFIG_BTB			/* toggle branch predition */
-#define CONFIG_ADDR_STREAMING		/* toggle addr streaming */
 
-#define CFG_INIT_DBCR DBCR_IDM		/* Enable Debug Exceptions */
+#define CONFIG_SYS_INIT_DBCR DBCR_IDM		/* Enable Debug Exceptions */
 
-#define CFG_MEMTEST_START	0x00200000	/* memtest region */
-#define CFG_MEMTEST_END		0x00400000
+#define CONFIG_SYS_MEMTEST_START	0x00200000	/* memtest region */
+#define CONFIG_SYS_MEMTEST_END		0x00400000
 
 
 /*
  * Base addresses -- Note these are effective addresses where the
  * actual resources get mapped (not physical addresses)
  */
-#define CFG_CCSRBAR_DEFAULT	0xff700000	/* CCSRBAR Default */
-#define CFG_CCSRBAR		0xe0000000	/* relocated CCSRBAR */
-#define CFG_CCSRBAR_PHYS	CFG_CCSRBAR	/* physical addr of CCSRBAR */
-#define CFG_IMMR		CFG_CCSRBAR	/* PQII uses CFG_IMMR */
+#define CONFIG_SYS_CCSRBAR_DEFAULT	0xff700000	/* CCSRBAR Default */
+#define CONFIG_SYS_CCSRBAR		0xe0000000	/* relocated CCSRBAR */
+#define CONFIG_SYS_CCSRBAR_PHYS	CONFIG_SYS_CCSRBAR	/* physical addr of CCSRBAR */
+#define CONFIG_SYS_IMMR		CONFIG_SYS_CCSRBAR	/* PQII uses CONFIG_SYS_IMMR */
 
 /* DDR Setup */
 #define CONFIG_FSL_DDR1
@@ -97,8 +97,8 @@
 
 #define CONFIG_MEM_INIT_VALUE		0xDeadBeef
 
-#define CFG_DDR_SDRAM_BASE	0x00000000	/* DDR is system memory*/
-#define CFG_SDRAM_BASE		CFG_DDR_SDRAM_BASE
+#define CONFIG_SYS_DDR_SDRAM_BASE	0x00000000	/* DDR is system memory*/
+#define CONFIG_SYS_SDRAM_BASE		CONFIG_SYS_DDR_SDRAM_BASE
 
 #define CONFIG_NUM_DDR_CONTROLLERS	1
 #define CONFIG_DIMM_SLOTS_PER_CTLR	1
@@ -108,42 +108,42 @@
 #define SPD_EEPROM_ADDRESS	0x51	/* CTLR 0 DIMM 0 */
 
 /* These are used when DDR doesn't use SPD.  */
-#define CFG_SDRAM_SIZE	128		/* DDR is 128MB */
-#define CFG_DDR_CS0_BNDS	0x00000007	/* 0-128MB */
-#define CFG_DDR_CS0_CONFIG	0x80000002
-#define CFG_DDR_TIMING_1	0x37344321
-#define CFG_DDR_TIMING_2	0x00000800	/* P9-45,may need tuning */
-#define CFG_DDR_CONTROL		0xc2000000	/* unbuffered,no DYN_PWR */
-#define CFG_DDR_MODE		0x00000062	/* DLL,normal,seq,4/2.5 */
-#define CFG_DDR_INTERVAL	0x05200100	/* autocharge,no open page */
+#define CONFIG_SYS_SDRAM_SIZE	128		/* DDR is 128MB */
+#define CONFIG_SYS_DDR_CS0_BNDS	0x00000007	/* 0-128MB */
+#define CONFIG_SYS_DDR_CS0_CONFIG	0x80000002
+#define CONFIG_SYS_DDR_TIMING_1	0x37344321
+#define CONFIG_SYS_DDR_TIMING_2	0x00000800	/* P9-45,may need tuning */
+#define CONFIG_SYS_DDR_CONTROL		0xc2000000	/* unbuffered,no DYN_PWR */
+#define CONFIG_SYS_DDR_MODE		0x00000062	/* DLL,normal,seq,4/2.5 */
+#define CONFIG_SYS_DDR_INTERVAL	0x05200100	/* autocharge,no open page */
 
 /*
  * SDRAM on the Local Bus
  */
-#define CFG_LBC_SDRAM_BASE	0xf0000000	/* Localbus SDRAM */
-#define CFG_LBC_SDRAM_SIZE	64		/* LBC SDRAM is 64MB */
+#define CONFIG_SYS_LBC_SDRAM_BASE	0xf0000000	/* Localbus SDRAM */
+#define CONFIG_SYS_LBC_SDRAM_SIZE	64		/* LBC SDRAM is 64MB */
 
-#define CFG_FLASH_BASE		0xff000000	/* start of FLASH 16M */
-#define CFG_BR0_PRELIM		0xff001801	/* port size 32bit */
+#define CONFIG_SYS_FLASH_BASE		0xff000000	/* start of FLASH 16M */
+#define CONFIG_SYS_BR0_PRELIM		0xff001801	/* port size 32bit */
 
-#define CFG_OR0_PRELIM		0xff006ff7	/* 16MB Flash */
-#define CFG_MAX_FLASH_BANKS	1		/* number of banks */
-#define CFG_MAX_FLASH_SECT	64		/* sectors per device */
-#undef	CFG_FLASH_CHECKSUM
-#define CFG_FLASH_ERASE_TOUT	60000	/* Flash Erase Timeout (ms) */
-#define CFG_FLASH_WRITE_TOUT	500	/* Flash Write Timeout (ms) */
+#define CONFIG_SYS_OR0_PRELIM		0xff006ff7	/* 16MB Flash */
+#define CONFIG_SYS_MAX_FLASH_BANKS	1		/* number of banks */
+#define CONFIG_SYS_MAX_FLASH_SECT	64		/* sectors per device */
+#undef	CONFIG_SYS_FLASH_CHECKSUM
+#define CONFIG_SYS_FLASH_ERASE_TOUT	60000	/* Flash Erase Timeout (ms) */
+#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Flash Write Timeout (ms) */
 
-#define CFG_MONITOR_BASE	TEXT_BASE	/* start of monitor */
+#define CONFIG_SYS_MONITOR_BASE	TEXT_BASE	/* start of monitor */
 
-#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
-#define CFG_RAMBOOT
+#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
+#define CONFIG_SYS_RAMBOOT
 #else
-#undef  CFG_RAMBOOT
+#undef  CONFIG_SYS_RAMBOOT
 #endif
 
 #define CONFIG_FLASH_CFI_DRIVER
-#define CFG_FLASH_CFI
-#define CFG_FLASH_EMPTY_INFO
+#define CONFIG_SYS_FLASH_CFI
+#define CONFIG_SYS_FLASH_EMPTY_INFO
 
 #undef CONFIG_CLOCKS_IN_MHZ
 
@@ -154,7 +154,7 @@
 
 /*
  * Base Register 2 and Option Register 2 configure SDRAM.
- * The SDRAM base address, CFG_LBC_SDRAM_BASE, is 0xf0000000.
+ * The SDRAM base address, CONFIG_SYS_LBC_SDRAM_BASE, is 0xf0000000.
  *
  * For BR2, need:
  *    Base address of 0xf0000000 = BR[0:16] = 1111 0000 0000 0000 0
@@ -166,14 +166,14 @@
  * 0    4    8    12   16   20   24   28
  * 1111 0000 0000 0000 0001 1000 0110 0001 = f0001861
  *
- * FIXME: CFG_LBC_SDRAM_BASE should be masked and OR'ed into
+ * FIXME: CONFIG_SYS_LBC_SDRAM_BASE should be masked and OR'ed into
  * FIXME: the top 17 bits of BR2.
  */
 
-#define CFG_BR2_PRELIM		0xf0001861
+#define CONFIG_SYS_BR2_PRELIM		0xf0001861
 
 /*
- * The SDRAM size in MB, CFG_LBC_SDRAM_SIZE, is 64.
+ * The SDRAM size in MB, CONFIG_SYS_LBC_SDRAM_SIZE, is 64.
  *
  * For OR2, need:
  *    64MB mask for AM, OR2[0:7] = 1111 1100
@@ -186,84 +186,83 @@
  * 1111 1100 0000 0000 0110 1001 0000 0001 = fc006901
  */
 
-#define CFG_OR2_PRELIM		0xfc006901
+#define CONFIG_SYS_OR2_PRELIM		0xfc006901
 
-#define CFG_LBC_LCRR		0x00030004    /* LB clock ratio reg */
-#define CFG_LBC_LBCR		0x00000000    /* LB config reg */
-#define CFG_LBC_LSRT		0x20000000    /* LB sdram refresh timer */
-#define CFG_LBC_MRTPR		0x20000000    /* LB refresh timer prescal*/
+#define CONFIG_SYS_LBC_LCRR		0x00030004    /* LB clock ratio reg */
+#define CONFIG_SYS_LBC_LBCR		0x00000000    /* LB config reg */
+#define CONFIG_SYS_LBC_LSRT		0x20000000    /* LB sdram refresh timer */
+#define CONFIG_SYS_LBC_MRTPR		0x20000000    /* LB refresh timer prescal*/
 
 /*
  * LSDMR masks
  */
-#define CFG_LBC_LSDMR_RFEN	(1 << (31 -  1))
-#define CFG_LBC_LSDMR_BSMA1516	(3 << (31 - 10))
-#define CFG_LBC_LSDMR_BSMA1617	(4 << (31 - 10))
-#define CFG_LBC_LSDMR_RFCR5	(3 << (31 - 16))
-#define CFG_LBC_LSDMR_RFCR16	(7 << (31 - 16))
-#define CFG_LBC_LSDMR_PRETOACT3	(3 << (31 - 19))
-#define CFG_LBC_LSDMR_PRETOACT7	(7 << (31 - 19))
-#define CFG_LBC_LSDMR_ACTTORW3	(3 << (31 - 22))
-#define CFG_LBC_LSDMR_ACTTORW7	(7 << (31 - 22))
-#define CFG_LBC_LSDMR_ACTTORW6	(6 << (31 - 22))
-#define CFG_LBC_LSDMR_BL8	(1 << (31 - 23))
-#define CFG_LBC_LSDMR_WRC2	(2 << (31 - 27))
-#define CFG_LBC_LSDMR_WRC4	(0 << (31 - 27))
-#define CFG_LBC_LSDMR_BUFCMD	(1 << (31 - 29))
-#define CFG_LBC_LSDMR_CL3	(3 << (31 - 31))
-
-#define CFG_LBC_LSDMR_OP_NORMAL	(0 << (31 - 4))
-#define CFG_LBC_LSDMR_OP_ARFRSH	(1 << (31 - 4))
-#define CFG_LBC_LSDMR_OP_SRFRSH	(2 << (31 - 4))
-#define CFG_LBC_LSDMR_OP_MRW	(3 << (31 - 4))
-#define CFG_LBC_LSDMR_OP_PRECH	(4 << (31 - 4))
-#define CFG_LBC_LSDMR_OP_PCHALL	(5 << (31 - 4))
-#define CFG_LBC_LSDMR_OP_ACTBNK	(6 << (31 - 4))
-#define CFG_LBC_LSDMR_OP_RWINV	(7 << (31 - 4))
-
-#define CFG_LBC_LSDMR_COMMON	( CFG_LBC_LSDMR_BSMA1516	\
-				| CFG_LBC_LSDMR_RFCR5		\
-				| CFG_LBC_LSDMR_PRETOACT3	\
-				| CFG_LBC_LSDMR_ACTTORW3	\
-				| CFG_LBC_LSDMR_BL8		\
-				| CFG_LBC_LSDMR_WRC2		\
-				| CFG_LBC_LSDMR_CL3		\
-				| CFG_LBC_LSDMR_RFEN		\
+#define CONFIG_SYS_LBC_LSDMR_RFEN	(1 << (31 -  1))
+#define CONFIG_SYS_LBC_LSDMR_BSMA1516	(3 << (31 - 10))
+#define CONFIG_SYS_LBC_LSDMR_BSMA1617	(4 << (31 - 10))
+#define CONFIG_SYS_LBC_LSDMR_RFCR5	(3 << (31 - 16))
+#define CONFIG_SYS_LBC_LSDMR_RFCR16	(7 << (31 - 16))
+#define CONFIG_SYS_LBC_LSDMR_PRETOACT3	(3 << (31 - 19))
+#define CONFIG_SYS_LBC_LSDMR_PRETOACT7	(7 << (31 - 19))
+#define CONFIG_SYS_LBC_LSDMR_ACTTORW3	(3 << (31 - 22))
+#define CONFIG_SYS_LBC_LSDMR_ACTTORW7	(7 << (31 - 22))
+#define CONFIG_SYS_LBC_LSDMR_ACTTORW6	(6 << (31 - 22))
+#define CONFIG_SYS_LBC_LSDMR_BL8	(1 << (31 - 23))
+#define CONFIG_SYS_LBC_LSDMR_WRC2	(2 << (31 - 27))
+#define CONFIG_SYS_LBC_LSDMR_WRC4	(0 << (31 - 27))
+#define CONFIG_SYS_LBC_LSDMR_BUFCMD	(1 << (31 - 29))
+#define CONFIG_SYS_LBC_LSDMR_CL3	(3 << (31 - 31))
+
+#define CONFIG_SYS_LBC_LSDMR_OP_NORMAL	(0 << (31 - 4))
+#define CONFIG_SYS_LBC_LSDMR_OP_ARFRSH	(1 << (31 - 4))
+#define CONFIG_SYS_LBC_LSDMR_OP_SRFRSH	(2 << (31 - 4))
+#define CONFIG_SYS_LBC_LSDMR_OP_MRW	(3 << (31 - 4))
+#define CONFIG_SYS_LBC_LSDMR_OP_PRECH	(4 << (31 - 4))
+#define CONFIG_SYS_LBC_LSDMR_OP_PCHALL	(5 << (31 - 4))
+#define CONFIG_SYS_LBC_LSDMR_OP_ACTBNK	(6 << (31 - 4))
+#define CONFIG_SYS_LBC_LSDMR_OP_RWINV	(7 << (31 - 4))
+
+#define CONFIG_SYS_LBC_LSDMR_COMMON	( CONFIG_SYS_LBC_LSDMR_BSMA1516	\
+				| CONFIG_SYS_LBC_LSDMR_RFCR5		\
+				| CONFIG_SYS_LBC_LSDMR_PRETOACT3	\
+				| CONFIG_SYS_LBC_LSDMR_ACTTORW3	\
+				| CONFIG_SYS_LBC_LSDMR_BL8		\
+				| CONFIG_SYS_LBC_LSDMR_WRC2		\
+				| CONFIG_SYS_LBC_LSDMR_CL3		\
+				| CONFIG_SYS_LBC_LSDMR_RFEN		\
 				)
 
 /*
  * SDRAM Controller configuration sequence.
  */
-#define CFG_LBC_LSDMR_1		( CFG_LBC_LSDMR_COMMON \
-				| CFG_LBC_LSDMR_OP_PCHALL)
-#define CFG_LBC_LSDMR_2		( CFG_LBC_LSDMR_COMMON \
-				| CFG_LBC_LSDMR_OP_ARFRSH)
-#define CFG_LBC_LSDMR_3		( CFG_LBC_LSDMR_COMMON \
-				| CFG_LBC_LSDMR_OP_ARFRSH)
-#define CFG_LBC_LSDMR_4		( CFG_LBC_LSDMR_COMMON \
-				| CFG_LBC_LSDMR_OP_MRW)
-#define CFG_LBC_LSDMR_5		( CFG_LBC_LSDMR_COMMON \
-				| CFG_LBC_LSDMR_OP_NORMAL)
+#define CONFIG_SYS_LBC_LSDMR_1		( CONFIG_SYS_LBC_LSDMR_COMMON \
+				| CONFIG_SYS_LBC_LSDMR_OP_PCHALL)
+#define CONFIG_SYS_LBC_LSDMR_2		( CONFIG_SYS_LBC_LSDMR_COMMON \
+				| CONFIG_SYS_LBC_LSDMR_OP_ARFRSH)
+#define CONFIG_SYS_LBC_LSDMR_3		( CONFIG_SYS_LBC_LSDMR_COMMON \
+				| CONFIG_SYS_LBC_LSDMR_OP_ARFRSH)
+#define CONFIG_SYS_LBC_LSDMR_4		( CONFIG_SYS_LBC_LSDMR_COMMON \
+				| CONFIG_SYS_LBC_LSDMR_OP_MRW)
+#define CONFIG_SYS_LBC_LSDMR_5		( CONFIG_SYS_LBC_LSDMR_COMMON \
+				| CONFIG_SYS_LBC_LSDMR_OP_NORMAL)
 
 
 /*
  * 32KB, 8-bit wide for ADS config reg
  */
-#define CFG_BR4_PRELIM          0xf8000801
-#define CFG_OR4_PRELIM		0xffffe1f1
-#define CFG_BCSR		(CFG_BR4_PRELIM & 0xffff8000)
+#define CONFIG_SYS_BR4_PRELIM          0xf8000801
+#define CONFIG_SYS_OR4_PRELIM		0xffffe1f1
+#define CONFIG_SYS_BCSR		(CONFIG_SYS_BR4_PRELIM & 0xffff8000)
 
-#define CONFIG_L1_INIT_RAM
-#define CFG_INIT_RAM_LOCK	1
-#define CFG_INIT_RAM_ADDR	0xe4010000	/* Initial RAM address */
-#define CFG_INIT_RAM_END	0x4000		/* End of used area in RAM */
+#define CONFIG_SYS_INIT_RAM_LOCK	1
+#define CONFIG_SYS_INIT_RAM_ADDR	0xe4010000	/* Initial RAM address */
+#define CONFIG_SYS_INIT_RAM_END	0x4000		/* End of used area in RAM */
 
-#define CFG_GBL_DATA_SIZE	128		/* num bytes initial data */
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_GBL_DATA_SIZE	128		/* num bytes initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
-#define CFG_MONITOR_LEN		(256 * 1024)    /* Reserve 256 kB for Mon */
-#define CFG_MALLOC_LEN		(128 * 1024)    /* Reserved for malloc */
+#define CONFIG_SYS_MONITOR_LEN		(256 * 1024)    /* Reserve 256 kB for Mon */
+#define CONFIG_SYS_MALLOC_LEN		(128 * 1024)    /* Reserved for malloc */
 
 /* Serial Port */
 #define CONFIG_CONS_ON_SCC	/* define if console on SCC */
@@ -272,13 +271,13 @@
 
 #define CONFIG_BAUDRATE		115200
 
-#define CFG_BAUDRATE_TABLE  \
+#define CONFIG_SYS_BAUDRATE_TABLE  \
 	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200}
 
 /* Use the HUSH parser */
-#define CFG_HUSH_PARSER
-#ifdef  CFG_HUSH_PARSER
-#define CFG_PROMPT_HUSH_PS2 "> "
+#define CONFIG_SYS_HUSH_PARSER
+#ifdef  CONFIG_SYS_HUSH_PARSER
+#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
 #endif
 
 /* pass open firmware flat tree */
@@ -286,8 +285,8 @@
 #define CONFIG_OF_BOARD_SETUP		1
 #define CONFIG_OF_STDOUT_VIA_ALIAS	1
 
-#define CFG_64BIT_VSPRINTF	1
-#define CFG_64BIT_STRTOUL	1
+#define CONFIG_SYS_64BIT_VSPRINTF	1
+#define CONFIG_SYS_64BIT_STRTOUL	1
 
 /*
  * I2C
@@ -295,26 +294,26 @@
 #define CONFIG_FSL_I2C		/* Use FSL common I2C driver */
 #define CONFIG_HARD_I2C		/* I2C with hardware support*/
 #undef	CONFIG_SOFT_I2C			/* I2C bit-banged */
-#define CFG_I2C_SPEED		400000	/* I2C speed and slave address */
-#define CFG_I2C_SLAVE		0x7F
-#define CFG_I2C_NOPROBES        {0x69}	/* Don't probe these addrs */
-#define CFG_I2C_OFFSET		0x3000
+#define CONFIG_SYS_I2C_SPEED		400000	/* I2C speed and slave address */
+#define CONFIG_SYS_I2C_SLAVE		0x7F
+#define CONFIG_SYS_I2C_NOPROBES        {0x69}	/* Don't probe these addrs */
+#define CONFIG_SYS_I2C_OFFSET		0x3000
 
 /* RapidIO MMU */
-#define CFG_RIO_MEM_BASE	0xc0000000	/* base address */
-#define CFG_RIO_MEM_PHYS	CFG_RIO_MEM_BASE
-#define CFG_RIO_MEM_SIZE	0x20000000	/* 128M */
+#define CONFIG_SYS_RIO_MEM_BASE	0xc0000000	/* base address */
+#define CONFIG_SYS_RIO_MEM_PHYS	CONFIG_SYS_RIO_MEM_BASE
+#define CONFIG_SYS_RIO_MEM_SIZE	0x20000000	/* 128M */
 
 /*
  * General PCI
  * Memory space is mapped 1-1, but I/O space must start from 0.
  */
-#define CFG_PCI1_MEM_BASE	0x80000000
-#define CFG_PCI1_MEM_PHYS	CFG_PCI1_MEM_BASE
-#define CFG_PCI1_MEM_SIZE	0x20000000	/* 512M */
-#define CFG_PCI1_IO_BASE	0x00000000
-#define CFG_PCI1_IO_PHYS	0xe2000000
-#define CFG_PCI1_IO_SIZE	0x100000	/* 1M */
+#define CONFIG_SYS_PCI1_MEM_BASE	0x80000000
+#define CONFIG_SYS_PCI1_MEM_PHYS	CONFIG_SYS_PCI1_MEM_BASE
+#define CONFIG_SYS_PCI1_MEM_SIZE	0x20000000	/* 512M */
+#define CONFIG_SYS_PCI1_IO_BASE	0x00000000
+#define CONFIG_SYS_PCI1_IO_PHYS	0xe2000000
+#define CONFIG_SYS_PCI1_IO_SIZE	0x100000	/* 1M */
 
 #if defined(CONFIG_PCI)
 
@@ -331,7 +330,7 @@
 #endif
 
 #undef CONFIG_PCI_SCAN_SHOW		/* show pci devices on startup */
-#define CFG_PCI_SUBSYS_VENDORID 0x1057  /* Motorola */
+#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x1057  /* Motorola */
 
 #endif	/* CONFIG_PCI */
 
@@ -373,10 +372,10 @@
    * - Select bus for bd/buffers
    * - Full duplex
    */
-  #define CFG_CMXFCR_MASK       (CMXFCR_FC2 | CMXFCR_RF2CS_MSK | CMXFCR_TF2CS_MSK)
-  #define CFG_CMXFCR_VALUE      (CMXFCR_RF2CS_CLK13 | CMXFCR_TF2CS_CLK14)
-  #define CFG_CPMFCR_RAMTYPE    0
-  #define CFG_FCC_PSMR          (FCC_PSMR_FDE)
+  #define CONFIG_SYS_CMXFCR_MASK       (CMXFCR_FC2 | CMXFCR_RF2CS_MSK | CMXFCR_TF2CS_MSK)
+  #define CONFIG_SYS_CMXFCR_VALUE      (CMXFCR_RF2CS_CLK13 | CMXFCR_TF2CS_CLK14)
+  #define CONFIG_SYS_CPMFCR_RAMTYPE    0
+  #define CONFIG_SYS_FCC_PSMR          (FCC_PSMR_FDE)
   #define FETH2_RST		0x01
 #elif (CONFIG_ETHER_INDEX == 3)
   /* need more definitions here for FE3 */
@@ -411,20 +410,20 @@
 /*
  * Environment
  */
-#ifndef CFG_RAMBOOT
-  #define CFG_ENV_IS_IN_FLASH	1
-  #define CFG_ENV_ADDR		(CFG_MONITOR_BASE + 0x40000)
-  #define CFG_ENV_SECT_SIZE	0x40000	/* 256K(one sector) for env */
-  #define CFG_ENV_SIZE		0x2000
+#ifndef CONFIG_SYS_RAMBOOT
+  #define CONFIG_ENV_IS_IN_FLASH	1
+  #define CONFIG_ENV_ADDR		(CONFIG_SYS_MONITOR_BASE + 0x40000)
+  #define CONFIG_ENV_SECT_SIZE	0x40000	/* 256K(one sector) for env */
+  #define CONFIG_ENV_SIZE		0x2000
 #else
-  #define CFG_NO_FLASH		1	/* Flash is not usable now */
-  #define CFG_ENV_IS_NOWHERE	1	/* Store ENV in memory only */
-  #define CFG_ENV_ADDR		(CFG_MONITOR_BASE - 0x1000)
-  #define CFG_ENV_SIZE		0x2000
+  #define CONFIG_SYS_NO_FLASH		1	/* Flash is not usable now */
+  #define CONFIG_ENV_IS_NOWHERE	1	/* Store ENV in memory only */
+  #define CONFIG_ENV_ADDR		(CONFIG_SYS_MONITOR_BASE - 0x1000)
+  #define CONFIG_ENV_SIZE		0x2000
 #endif
 
 #define CONFIG_LOADS_ECHO	1	/* echo on for serial download */
-#define CFG_LOADS_BAUD_CHANGE	1	/* allow baudrate change */
+#define CONFIG_SYS_LOADS_BAUD_CHANGE	1	/* allow baudrate change */
 
 /*
  * BOOTP options
@@ -443,6 +442,8 @@
 #define CONFIG_CMD_PING
 #define CONFIG_CMD_I2C
 #define CONFIG_CMD_ELF
+#define CONFIG_CMD_IRQ
+#define CONFIG_CMD_SETEXPR
 
 #if defined(CONFIG_PCI)
     #define CONFIG_CMD_PCI
@@ -452,7 +453,7 @@
     #define CONFIG_CMD_MII
 #endif
 
-#if defined(CFG_RAMBOOT)
+#if defined(CONFIG_SYS_RAMBOOT)
     #undef CONFIG_CMD_ENV
     #undef CONFIG_CMD_LOADS
 #endif
@@ -463,28 +464,28 @@
 /*
  * Miscellaneous configurable options
  */
-#define CFG_LONGHELP			/* undef to save memory	*/
+#define CONFIG_SYS_LONGHELP			/* undef to save memory	*/
 #define CONFIG_CMDLINE_EDITING		/* Command-line editing */
-#define CFG_LOAD_ADDR	0x1000000	/* default load address */
-#define CFG_PROMPT	"=> "		/* Monitor Command Prompt */
+#define CONFIG_SYS_LOAD_ADDR	0x1000000	/* default load address */
+#define CONFIG_SYS_PROMPT	"=> "		/* Monitor Command Prompt */
 
 #if defined(CONFIG_CMD_KGDB)
-    #define CFG_CBSIZE	1024		/* Console I/O Buffer Size */
+    #define CONFIG_SYS_CBSIZE	1024		/* Console I/O Buffer Size */
 #else
-    #define CFG_CBSIZE	256		/* Console I/O Buffer Size */
+    #define CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size */
 #endif
 
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define CFG_MAXARGS	16		/* max number of command args */
-#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size */
-#define CFG_HZ		1000		/* decrementer freq: 1ms ticks */
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS	16		/* max number of command args */
+#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size */
+#define CONFIG_SYS_HZ		1000		/* decrementer freq: 1ms ticks */
 
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define CFG_BOOTMAPSZ	(8 << 20)	/* Initial Memory map for Linux*/
+#define CONFIG_SYS_BOOTMAPSZ	(8 << 20)	/* Initial Memory map for Linux*/
 
 /*
  * Internal Definitions
diff --git a/include/configs/MPC8568MDS.h b/include/configs/MPC8568MDS.h
index 8aeaa293b..da1f45422 100644
--- a/include/configs/MPC8568MDS.h
+++ b/include/configs/MPC8568MDS.h
@@ -38,6 +38,7 @@
 #define CONFIG_PCIE1		1	/* PCIE controller */
 #define CONFIG_FSL_PCI_INIT	1	/* use common fsl pci init code */
 #define CONFIG_FSL_PCIE_RESET	1	/* need PCIe reset errata */
+#define CONFIG_SYS_PCI_64BIT	1	/* enable 64-bit PCI resources */
 #define CONFIG_TSEC_ENET		/* tsec ethernet support */
 #define CONFIG_QE			/* Enable QE */
 #define CONFIG_ENV_OVERWRITE
@@ -60,7 +61,6 @@ extern unsigned long get_clock_freq(void);
  */
 #define CONFIG_L2_CACHE				/* toggle L2 cache	*/
 #define CONFIG_BTB				/* toggle branch predition */
-#define CONFIG_ADDR_STREAMING			/* toggle addr streaming   */
 
 /*
  * Only possible on E500 Version 2 or newer cores.
@@ -70,20 +70,20 @@ extern unsigned long get_clock_freq(void);
 
 #define CONFIG_BOARD_EARLY_INIT_F	1	/* Call board_pre_init */
 
-#define CFG_MEMTEST_START	0x00200000	/* memtest works on */
-#define CFG_MEMTEST_END		0x00400000
+#define CONFIG_SYS_MEMTEST_START	0x00200000	/* memtest works on */
+#define CONFIG_SYS_MEMTEST_END		0x00400000
 
 /*
  * Base addresses -- Note these are effective addresses where the
  * actual resources get mapped (not physical addresses)
  */
-#define CFG_CCSRBAR_DEFAULT	0xff700000	/* CCSRBAR Default */
-#define CFG_CCSRBAR		0xe0000000	/* relocated CCSRBAR */
-#define CFG_CCSRBAR_PHYS	CFG_CCSRBAR	/* physical addr of CCSRBAR */
-#define CFG_IMMR		CFG_CCSRBAR	/* PQII uses CFG_IMMR */
+#define CONFIG_SYS_CCSRBAR_DEFAULT	0xff700000	/* CCSRBAR Default */
+#define CONFIG_SYS_CCSRBAR		0xe0000000	/* relocated CCSRBAR */
+#define CONFIG_SYS_CCSRBAR_PHYS	CONFIG_SYS_CCSRBAR	/* physical addr of CCSRBAR */
+#define CONFIG_SYS_IMMR		CONFIG_SYS_CCSRBAR	/* PQII uses CONFIG_SYS_IMMR */
 
-#define CFG_PCI1_ADDR           (CFG_CCSRBAR+0x8000)
-#define CFG_PCIE1_ADDR          (CFG_CCSRBAR+0xa000)
+#define CONFIG_SYS_PCI1_ADDR           (CONFIG_SYS_CCSRBAR+0x8000)
+#define CONFIG_SYS_PCIE1_ADDR          (CONFIG_SYS_CCSRBAR+0xa000)
 
 /* DDR Setup */
 #define CONFIG_FSL_DDR2
@@ -91,12 +91,12 @@ extern unsigned long get_clock_freq(void);
 #define CONFIG_SPD_EEPROM		/* Use SPD EEPROM for DDR setup*/
 #define CONFIG_DDR_SPD
 #define CONFIG_DDR_DLL			/* possible DLL fix needed */
-#undef CONFIG_ECC_INIT_VIA_DDRCONTROLLER	/* DDR controller or DMA? */
+#define CONFIG_ECC_INIT_VIA_DDRCONTROLLER	/* DDR controller or DMA? */
 
 #define CONFIG_MEM_INIT_VALUE	0xDeadBeef
 
-#define CFG_DDR_SDRAM_BASE	0x00000000	/* DDR is system memory*/
-#define CFG_SDRAM_BASE		CFG_DDR_SDRAM_BASE
+#define CONFIG_SYS_DDR_SDRAM_BASE	0x00000000	/* DDR is system memory*/
+#define CONFIG_SYS_SDRAM_BASE		CONFIG_SYS_DDR_SDRAM_BASE
 
 #define CONFIG_NUM_DDR_CONTROLLERS	1
 #define CONFIG_DIMM_SLOTS_PER_CTLR	1
@@ -145,70 +145,70 @@ extern unsigned long get_clock_freq(void);
  * 0    4    8    12   16   20   24   28
  * 1111 1111 1000 0000 0110 1110 0110 0101 = ff806e65    ORx
  */
-#define CFG_BCSR_BASE		0xf8000000
+#define CONFIG_SYS_BCSR_BASE		0xf8000000
 
-#define CFG_FLASH_BASE		0xfe000000	/* start of FLASH 32M */
+#define CONFIG_SYS_FLASH_BASE		0xfe000000	/* start of FLASH 32M */
 
 /*Chip select 0 - Flash*/
-#define CFG_BR0_PRELIM		0xfe001001
-#define	CFG_OR0_PRELIM		0xfe006ff7
+#define CONFIG_SYS_BR0_PRELIM		0xfe001001
+#define	CONFIG_SYS_OR0_PRELIM		0xfe006ff7
 
 /*Chip slelect 1 - BCSR*/
-#define CFG_BR1_PRELIM		0xf8000801
-#define	CFG_OR1_PRELIM		0xffffe9f7
+#define CONFIG_SYS_BR1_PRELIM		0xf8000801
+#define	CONFIG_SYS_OR1_PRELIM		0xffffe9f7
 
-/*#define CFG_FLASH_BANKS_LIST	{0xff800000, CFG_FLASH_BASE} */
-#define CFG_MAX_FLASH_BANKS		1		/* number of banks */
-#define CFG_MAX_FLASH_SECT		512		/* sectors per device */
-#undef	CFG_FLASH_CHECKSUM
-#define CFG_FLASH_ERASE_TOUT	60000	/* Flash Erase Timeout (ms) */
-#define CFG_FLASH_WRITE_TOUT	500		/* Flash Write Timeout (ms) */
+/*#define CONFIG_SYS_FLASH_BANKS_LIST	{0xff800000, CONFIG_SYS_FLASH_BASE} */
+#define CONFIG_SYS_MAX_FLASH_BANKS		1		/* number of banks */
+#define CONFIG_SYS_MAX_FLASH_SECT		512		/* sectors per device */
+#undef	CONFIG_SYS_FLASH_CHECKSUM
+#define CONFIG_SYS_FLASH_ERASE_TOUT	60000	/* Flash Erase Timeout (ms) */
+#define CONFIG_SYS_FLASH_WRITE_TOUT	500		/* Flash Write Timeout (ms) */
 
-#define CFG_MONITOR_BASE	TEXT_BASE	/* start of monitor */
+#define CONFIG_SYS_MONITOR_BASE	TEXT_BASE	/* start of monitor */
 
 #define CONFIG_FLASH_CFI_DRIVER
-#define CFG_FLASH_CFI
-#define CFG_FLASH_EMPTY_INFO
+#define CONFIG_SYS_FLASH_CFI
+#define CONFIG_SYS_FLASH_EMPTY_INFO
 
 
 /*
  * SDRAM on the LocalBus
  */
-#define CFG_LBC_SDRAM_BASE	0xf0000000	/* Localbus SDRAM	 */
-#define CFG_LBC_SDRAM_SIZE	64			/* LBC SDRAM is 64MB */
+#define CONFIG_SYS_LBC_SDRAM_BASE	0xf0000000	/* Localbus SDRAM	 */
+#define CONFIG_SYS_LBC_SDRAM_SIZE	64			/* LBC SDRAM is 64MB */
 
 
 /*Chip select 2 - SDRAM*/
-#define CFG_BR2_PRELIM      0xf0001861
-#define CFG_OR2_PRELIM		0xfc006901
+#define CONFIG_SYS_BR2_PRELIM      0xf0001861
+#define CONFIG_SYS_OR2_PRELIM		0xfc006901
 
-#define CFG_LBC_LCRR		0x00030004	/* LB clock ratio reg */
-#define CFG_LBC_LBCR		0x00000000	/* LB config reg */
-#define CFG_LBC_LSRT		0x20000000	/* LB sdram refresh timer */
-#define CFG_LBC_MRTPR		0x00000000	/* LB refresh timer prescal*/
+#define CONFIG_SYS_LBC_LCRR		0x00030004	/* LB clock ratio reg */
+#define CONFIG_SYS_LBC_LBCR		0x00000000	/* LB config reg */
+#define CONFIG_SYS_LBC_LSRT		0x20000000	/* LB sdram refresh timer */
+#define CONFIG_SYS_LBC_MRTPR		0x00000000	/* LB refresh timer prescal*/
 
 /*
  * LSDMR masks
  */
-#define CFG_LBC_LSDMR_RFEN	(1 << (31 -  1))
-#define CFG_LBC_LSDMR_BSMA1516	(3 << (31 - 10))
-#define CFG_LBC_LSDMR_BSMA1617	(4 << (31 - 10))
-#define CFG_LBC_LSDMR_RFCR16	(7 << (31 - 16))
-#define CFG_LBC_LSDMR_PRETOACT7	(7 << (31 - 19))
-#define CFG_LBC_LSDMR_ACTTORW7	(7 << (31 - 22))
-#define CFG_LBC_LSDMR_ACTTORW6	(6 << (31 - 22))
-#define CFG_LBC_LSDMR_BL8	(1 << (31 - 23))
-#define CFG_LBC_LSDMR_WRC4	(0 << (31 - 27))
-#define CFG_LBC_LSDMR_CL3	(3 << (31 - 31))
-
-#define CFG_LBC_LSDMR_OP_NORMAL	(0 << (31 - 4))
-#define CFG_LBC_LSDMR_OP_ARFRSH	(1 << (31 - 4))
-#define CFG_LBC_LSDMR_OP_SRFRSH	(2 << (31 - 4))
-#define CFG_LBC_LSDMR_OP_MRW	(3 << (31 - 4))
-#define CFG_LBC_LSDMR_OP_PRECH	(4 << (31 - 4))
-#define CFG_LBC_LSDMR_OP_PCHALL	(5 << (31 - 4))
-#define CFG_LBC_LSDMR_OP_ACTBNK	(6 << (31 - 4))
-#define CFG_LBC_LSDMR_OP_RWINV	(7 << (31 - 4))
+#define CONFIG_SYS_LBC_LSDMR_RFEN	(1 << (31 -  1))
+#define CONFIG_SYS_LBC_LSDMR_BSMA1516	(3 << (31 - 10))
+#define CONFIG_SYS_LBC_LSDMR_BSMA1617	(4 << (31 - 10))
+#define CONFIG_SYS_LBC_LSDMR_RFCR16	(7 << (31 - 16))
+#define CONFIG_SYS_LBC_LSDMR_PRETOACT7	(7 << (31 - 19))
+#define CONFIG_SYS_LBC_LSDMR_ACTTORW7	(7 << (31 - 22))
+#define CONFIG_SYS_LBC_LSDMR_ACTTORW6	(6 << (31 - 22))
+#define CONFIG_SYS_LBC_LSDMR_BL8	(1 << (31 - 23))
+#define CONFIG_SYS_LBC_LSDMR_WRC4	(0 << (31 - 27))
+#define CONFIG_SYS_LBC_LSDMR_CL3	(3 << (31 - 31))
+
+#define CONFIG_SYS_LBC_LSDMR_OP_NORMAL	(0 << (31 - 4))
+#define CONFIG_SYS_LBC_LSDMR_OP_ARFRSH	(1 << (31 - 4))
+#define CONFIG_SYS_LBC_LSDMR_OP_SRFRSH	(2 << (31 - 4))
+#define CONFIG_SYS_LBC_LSDMR_OP_MRW	(3 << (31 - 4))
+#define CONFIG_SYS_LBC_LSDMR_OP_PRECH	(4 << (31 - 4))
+#define CONFIG_SYS_LBC_LSDMR_OP_PCHALL	(5 << (31 - 4))
+#define CONFIG_SYS_LBC_LSDMR_OP_ACTBNK	(6 << (31 - 4))
+#define CONFIG_SYS_LBC_LSDMR_OP_RWINV	(7 << (31 - 4))
 
 /*
  * Common settings for all Local Bus SDRAM commands.
@@ -216,13 +216,13 @@ extern unsigned long get_clock_freq(void);
  *                  or BSMA1617 (for CPU 1.0) (old)
  * is OR'ed in too.
  */
-#define CFG_LBC_LSDMR_COMMON	( CFG_LBC_LSDMR_RFCR16		\
-				| CFG_LBC_LSDMR_PRETOACT7	\
-				| CFG_LBC_LSDMR_ACTTORW7	\
-				| CFG_LBC_LSDMR_BL8		\
-				| CFG_LBC_LSDMR_WRC4		\
-				| CFG_LBC_LSDMR_CL3		\
-				| CFG_LBC_LSDMR_RFEN		\
+#define CONFIG_SYS_LBC_LSDMR_COMMON	( CONFIG_SYS_LBC_LSDMR_RFCR16		\
+				| CONFIG_SYS_LBC_LSDMR_PRETOACT7	\
+				| CONFIG_SYS_LBC_LSDMR_ACTTORW7	\
+				| CONFIG_SYS_LBC_LSDMR_BL8		\
+				| CONFIG_SYS_LBC_LSDMR_WRC4		\
+				| CONFIG_SYS_LBC_LSDMR_CL3		\
+				| CONFIG_SYS_LBC_LSDMR_RFEN		\
 				)
 
 /*
@@ -254,46 +254,45 @@ extern unsigned long get_clock_freq(void);
  * 0    4    8    12   16   20   24   28
  * 1111 1111 1111 0000 0000 1111 1111 0111 = fff00ff7
  */
-#define CFG_BCSR (0xf8000000)
+#define CONFIG_SYS_BCSR (0xf8000000)
 
 /*Chip slelect 4 - PIB*/
-#define CFG_BR4_PRELIM   0xf8008801
-#define CFG_OR4_PRELIM   0xffffe9f7
+#define CONFIG_SYS_BR4_PRELIM   0xf8008801
+#define CONFIG_SYS_OR4_PRELIM   0xffffe9f7
 
 /*Chip select 5 - PIB*/
-#define CFG_BR5_PRELIM	 0xf8010801
-#define CFG_OR5_PRELIM	 0xffff69f7
+#define CONFIG_SYS_BR5_PRELIM	 0xf8010801
+#define CONFIG_SYS_OR5_PRELIM	 0xffff69f7
 
-#define CONFIG_L1_INIT_RAM
-#define CFG_INIT_RAM_LOCK	1
-#define CFG_INIT_RAM_ADDR	0xe4010000	/* Initial RAM address */
-#define CFG_INIT_RAM_END	0x4000	    /* End of used area in RAM */
+#define CONFIG_SYS_INIT_RAM_LOCK	1
+#define CONFIG_SYS_INIT_RAM_ADDR	0xe4010000	/* Initial RAM address */
+#define CONFIG_SYS_INIT_RAM_END	0x4000	    /* End of used area in RAM */
 
-#define CFG_GBL_DATA_SIZE	128	    /* num bytes initial data */
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_GBL_DATA_SIZE	128	    /* num bytes initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
-#define CFG_MONITOR_LEN		(256 * 1024) /* Reserve 256 kB for Mon */
-#define CFG_MALLOC_LEN		(128 * 1024)	/* Reserved for malloc */
+#define CONFIG_SYS_MONITOR_LEN		(256 * 1024) /* Reserve 256 kB for Mon */
+#define CONFIG_SYS_MALLOC_LEN		(128 * 1024)	/* Reserved for malloc */
 
 /* Serial Port */
 #define CONFIG_CONS_INDEX		1
 #undef	CONFIG_SERIAL_SOFTWARE_FIFO
-#define CFG_NS16550
-#define CFG_NS16550_SERIAL
-#define CFG_NS16550_REG_SIZE    1
-#define CFG_NS16550_CLK		get_bus_freq(0)
+#define CONFIG_SYS_NS16550
+#define CONFIG_SYS_NS16550_SERIAL
+#define CONFIG_SYS_NS16550_REG_SIZE    1
+#define CONFIG_SYS_NS16550_CLK		get_bus_freq(0)
 
-#define CFG_BAUDRATE_TABLE  \
+#define CONFIG_SYS_BAUDRATE_TABLE  \
 	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200}
 
-#define CFG_NS16550_COM1        (CFG_CCSRBAR+0x4500)
-#define CFG_NS16550_COM2        (CFG_CCSRBAR+0x4600)
+#define CONFIG_SYS_NS16550_COM1        (CONFIG_SYS_CCSRBAR+0x4500)
+#define CONFIG_SYS_NS16550_COM2        (CONFIG_SYS_CCSRBAR+0x4600)
 
 /* Use the HUSH parser*/
-#define CFG_HUSH_PARSER
-#ifdef  CFG_HUSH_PARSER
-#define CFG_PROMPT_HUSH_PS2 "> "
+#define CONFIG_SYS_HUSH_PARSER
+#ifdef  CONFIG_SYS_HUSH_PARSER
+#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
 #endif
 
 /* pass open firmware flat tree */
@@ -301,8 +300,8 @@ extern unsigned long get_clock_freq(void);
 #define CONFIG_OF_BOARD_SETUP		1
 #define CONFIG_OF_STDOUT_VIA_ALIAS	1
 
-#define CFG_64BIT_VSPRINTF	1
-#define CFG_64BIT_STRTOUL	1
+#define CONFIG_SYS_64BIT_VSPRINTF	1
+#define CONFIG_SYS_64BIT_STRTOUL	1
 
 /*
  * I2C
@@ -312,32 +311,32 @@ extern unsigned long get_clock_freq(void);
 #undef	CONFIG_SOFT_I2C			/* I2C bit-banged */
 #define CONFIG_I2C_MULTI_BUS
 #define CONFIG_I2C_CMD_TREE
-#define CFG_I2C_SPEED		400000	/* I2C speed and slave address */
-#define CFG_I2C_EEPROM_ADDR	0x52
-#define CFG_I2C_SLAVE		0x7F
-#define CFG_I2C_NOPROBES        {{0,0x69}}	/* Don't probe these addrs */
-#define CFG_I2C_OFFSET		0x3000
-#define CFG_I2C2_OFFSET		0x3100
+#define CONFIG_SYS_I2C_SPEED		400000	/* I2C speed and slave address */
+#define CONFIG_SYS_I2C_EEPROM_ADDR	0x52
+#define CONFIG_SYS_I2C_SLAVE		0x7F
+#define CONFIG_SYS_I2C_NOPROBES        {{0,0x69}}	/* Don't probe these addrs */
+#define CONFIG_SYS_I2C_OFFSET		0x3000
+#define CONFIG_SYS_I2C2_OFFSET		0x3100
 
 /*
  * General PCI
  * Memory Addresses are mapped 1-1. I/O is mapped from 0
  */
-#define CFG_PCI1_MEM_BASE	0x80000000
-#define CFG_PCI1_MEM_PHYS	CFG_PCI1_MEM_BASE
-#define CFG_PCI1_MEM_SIZE	0x20000000	/* 512M */
-#define CFG_PCI1_IO_BASE	0x00000000
-#define CFG_PCI1_IO_PHYS	0xe2000000
-#define CFG_PCI1_IO_SIZE	0x00800000	/* 8M */
-
-#define CFG_PCIE1_MEM_BASE	0xa0000000
-#define CFG_PCIE1_MEM_PHYS	CFG_PCIE1_MEM_BASE
-#define CFG_PCIE1_MEM_SIZE	0x20000000	/* 512M */
-#define CFG_PCIE1_IO_BASE	0x00000000
-#define CFG_PCIE1_IO_PHYS	0xe2800000
-#define CFG_PCIE1_IO_SIZE	0x00800000	/* 8M */
-
-#define CFG_SRIO_MEM_BASE	0xc0000000
+#define CONFIG_SYS_PCI1_MEM_BASE	0x80000000
+#define CONFIG_SYS_PCI1_MEM_PHYS	CONFIG_SYS_PCI1_MEM_BASE
+#define CONFIG_SYS_PCI1_MEM_SIZE	0x20000000	/* 512M */
+#define CONFIG_SYS_PCI1_IO_BASE	0x00000000
+#define CONFIG_SYS_PCI1_IO_PHYS	0xe2000000
+#define CONFIG_SYS_PCI1_IO_SIZE	0x00800000	/* 8M */
+
+#define CONFIG_SYS_PCIE1_MEM_BASE	0xa0000000
+#define CONFIG_SYS_PCIE1_MEM_PHYS	CONFIG_SYS_PCIE1_MEM_BASE
+#define CONFIG_SYS_PCIE1_MEM_SIZE	0x20000000	/* 512M */
+#define CONFIG_SYS_PCIE1_IO_BASE	0x00000000
+#define CONFIG_SYS_PCIE1_IO_PHYS	0xe2800000
+#define CONFIG_SYS_PCIE1_IO_SIZE	0x00800000	/* 8M */
+
+#define CONFIG_SYS_SRIO_MEM_BASE	0xc0000000
 
 #ifdef CONFIG_QE
 /*
@@ -357,23 +356,23 @@ extern unsigned long get_clock_freq(void);
 #define CONFIG_UEC_ETH1         /* GETH1 */
 
 #ifdef CONFIG_UEC_ETH1
-#define CFG_UEC1_UCC_NUM        0       /* UCC1 */
-#define CFG_UEC1_RX_CLK         QE_CLK_NONE
-#define CFG_UEC1_TX_CLK         QE_CLK16
-#define CFG_UEC1_ETH_TYPE       GIGA_ETH
-#define CFG_UEC1_PHY_ADDR       7
-#define CFG_UEC1_INTERFACE_MODE ENET_1000_GMII
+#define CONFIG_SYS_UEC1_UCC_NUM        0       /* UCC1 */
+#define CONFIG_SYS_UEC1_RX_CLK         QE_CLK_NONE
+#define CONFIG_SYS_UEC1_TX_CLK         QE_CLK16
+#define CONFIG_SYS_UEC1_ETH_TYPE       GIGA_ETH
+#define CONFIG_SYS_UEC1_PHY_ADDR       7
+#define CONFIG_SYS_UEC1_INTERFACE_MODE ENET_1000_RGMII_ID
 #endif
 
 #define CONFIG_UEC_ETH2         /* GETH2 */
 
 #ifdef CONFIG_UEC_ETH2
-#define CFG_UEC2_UCC_NUM        1       /* UCC2 */
-#define CFG_UEC2_RX_CLK         QE_CLK_NONE
-#define CFG_UEC2_TX_CLK         QE_CLK16
-#define CFG_UEC2_ETH_TYPE       GIGA_ETH
-#define CFG_UEC2_PHY_ADDR       1
-#define CFG_UEC2_INTERFACE_MODE ENET_1000_GMII
+#define CONFIG_SYS_UEC2_UCC_NUM        1       /* UCC2 */
+#define CONFIG_SYS_UEC2_RX_CLK         QE_CLK_NONE
+#define CONFIG_SYS_UEC2_TX_CLK         QE_CLK16
+#define CONFIG_SYS_UEC2_ETH_TYPE       GIGA_ETH
+#define CONFIG_SYS_UEC2_PHY_ADDR       1
+#define CONFIG_SYS_UEC2_INTERFACE_MODE ENET_1000_RGMII_ID
 #endif
 #endif /* CONFIG_QE */
 
@@ -386,12 +385,7 @@ extern unsigned long get_clock_freq(void);
 #undef CONFIG_TULIP
 
 #undef CONFIG_PCI_SCAN_SHOW		/* show pci devices on startup */
-#define CFG_PCI_SUBSYS_VENDORID 0x1057  /* Motorola */
-
-/* PCI view of System Memory */
-#define CFG_PCI_MEMORY_BUS      0x00000000
-#define CFG_PCI_MEMORY_PHYS     0x00000000
-#define CFG_PCI_MEMORY_SIZE     0x80000000
+#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x1057  /* Motorola */
 
 #endif	/* CONFIG_PCI */
 
@@ -424,13 +418,13 @@ extern unsigned long get_clock_freq(void);
 /*
  * Environment
  */
-#define CFG_ENV_IS_IN_FLASH	1
-#define CFG_ENV_ADDR		(CFG_MONITOR_BASE + 0x40000)
-#define CFG_ENV_SECT_SIZE	0x40000	/* 256K(one sector) for env */
-#define CFG_ENV_SIZE		0x2000
+#define CONFIG_ENV_IS_IN_FLASH	1
+#define CONFIG_ENV_ADDR		(CONFIG_SYS_MONITOR_BASE + 0x40000)
+#define CONFIG_ENV_SECT_SIZE	0x40000	/* 256K(one sector) for env */
+#define CONFIG_ENV_SIZE		0x2000
 
 #define CONFIG_LOADS_ECHO	1	/* echo on for serial download */
-#define CFG_LOADS_BAUD_CHANGE	1	/* allow baudrate change */
+#define CONFIG_SYS_LOADS_BAUD_CHANGE	1	/* allow baudrate change */
 
 
 /*
@@ -451,6 +445,8 @@ extern unsigned long get_clock_freq(void);
 #define CONFIG_CMD_I2C
 #define CONFIG_CMD_MII
 #define CONFIG_CMD_ELF
+#define CONFIG_CMD_IRQ
+#define CONFIG_CMD_SETEXPR
 
 #if defined(CONFIG_PCI)
     #define CONFIG_CMD_PCI
@@ -462,26 +458,26 @@ extern unsigned long get_clock_freq(void);
 /*
  * Miscellaneous configurable options
  */
-#define CFG_LONGHELP			/* undef to save memory	*/
+#define CONFIG_SYS_LONGHELP			/* undef to save memory	*/
 #define CONFIG_CMDLINE_EDITING		/* Command-line editing */
-#define CFG_LOAD_ADDR	0x2000000	/* default load address */
-#define CFG_PROMPT	"=> "		/* Monitor Command Prompt */
+#define CONFIG_SYS_LOAD_ADDR	0x2000000	/* default load address */
+#define CONFIG_SYS_PROMPT	"=> "		/* Monitor Command Prompt */
 #if defined(CONFIG_CMD_KGDB)
-#define CFG_CBSIZE	1024		/* Console I/O Buffer Size */
+#define CONFIG_SYS_CBSIZE	1024		/* Console I/O Buffer Size */
 #else
-#define CFG_CBSIZE	256			/* Console I/O Buffer Size */
+#define CONFIG_SYS_CBSIZE	256			/* Console I/O Buffer Size */
 #endif
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define CFG_MAXARGS	16		/* max number of command args */
-#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size */
-#define CFG_HZ		1000		/* decrementer freq: 1ms ticks */
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS	16		/* max number of command args */
+#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size */
+#define CONFIG_SYS_HZ		1000		/* decrementer freq: 1ms ticks */
 
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define CFG_BOOTMAPSZ	(8 << 20)	/* Initial Memory map for Linux*/
+#define CONFIG_SYS_BOOTMAPSZ	(8 << 20)	/* Initial Memory map for Linux*/
 
 /*
  * Internal Definitions
diff --git a/include/configs/MPC8572DS.h b/include/configs/MPC8572DS.h
index b0094f310..37c3f4200 100644
--- a/include/configs/MPC8572DS.h
+++ b/include/configs/MPC8572DS.h
@@ -42,6 +42,7 @@
 #define CONFIG_PCIE3		1	/* PCIE controler 3 (ULI bridge) */
 #define CONFIG_FSL_PCI_INIT	1	/* Use common FSL init code */
 #define CONFIG_FSL_PCIE_RESET	1	/* need PCIe reset errata */
+#define CONFIG_SYS_PCI_64BIT	1	/* enable 64-bit PCI resources */
 
 #define CONFIG_FSL_LAW		1	/* Use common FSL init code */
 
@@ -61,7 +62,7 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy);
 #endif
 #define CONFIG_SYS_CLK_FREQ	get_board_sys_clk(0) /* sysclk for MPC85xx */
 #define CONFIG_DDR_CLK_FREQ	get_board_ddr_clk(0) /* ddrclk for MPC85xx */
-#define CONFIG_ICS307_REFCLK_HZ	33333333  /* ICS307 clock chip ref freq */
+#define CONFIG_ICS307_REFCLK_HZ	33333000  /* ICS307 clock chip ref freq */
 #define CONFIG_GET_CLK_FROM_ICS307	  /* decode sysclk and ddrclk freq
 					     from ICS307 instead of switches */
 
@@ -70,26 +71,25 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy);
  */
 #define CONFIG_L2_CACHE			/* toggle L2 cache */
 #define CONFIG_BTB			/* toggle branch predition */
-#define CONFIG_ADDR_STREAMING		/* toggle addr streaming */
 
 #define CONFIG_ENABLE_36BIT_PHYS	1
 
-#define CFG_MEMTEST_START	0x00000000	/* memtest works on */
-#define CFG_MEMTEST_END		0x7fffffff
+#define CONFIG_SYS_MEMTEST_START	0x00000000	/* memtest works on */
+#define CONFIG_SYS_MEMTEST_END		0x7fffffff
 #define CONFIG_PANIC_HANG	/* do not reset board on panic */
 
 /*
  * Base addresses -- Note these are effective addresses where the
  * actual resources get mapped (not physical addresses)
  */
-#define CFG_CCSRBAR_DEFAULT	0xff700000	/* CCSRBAR Default */
-#define CFG_CCSRBAR		0xffe00000	/* relocated CCSRBAR */
-#define CFG_CCSRBAR_PHYS	CFG_CCSRBAR	/* physical addr of CCSRBAR */
-#define CFG_IMMR		CFG_CCSRBAR	/* PQII uses CFG_IMMR */
+#define CONFIG_SYS_CCSRBAR_DEFAULT	0xff700000	/* CCSRBAR Default */
+#define CONFIG_SYS_CCSRBAR		0xffe00000	/* relocated CCSRBAR */
+#define CONFIG_SYS_CCSRBAR_PHYS	CONFIG_SYS_CCSRBAR	/* physical addr of CCSRBAR */
+#define CONFIG_SYS_IMMR		CONFIG_SYS_CCSRBAR	/* PQII uses CONFIG_SYS_IMMR */
 
-#define CFG_PCIE3_ADDR		(CFG_CCSRBAR+0x8000)
-#define CFG_PCIE2_ADDR		(CFG_CCSRBAR+0x9000)
-#define CFG_PCIE1_ADDR		(CFG_CCSRBAR+0xa000)
+#define CONFIG_SYS_PCIE3_ADDR		(CONFIG_SYS_CCSRBAR+0x8000)
+#define CONFIG_SYS_PCIE2_ADDR		(CONFIG_SYS_CCSRBAR+0x9000)
+#define CONFIG_SYS_PCIE1_ADDR		(CONFIG_SYS_CCSRBAR+0xa000)
 
 /* DDR Setup */
 #define CONFIG_FSL_DDR2
@@ -98,50 +98,42 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy);
 #define CONFIG_DDR_SPD
 #undef CONFIG_DDR_DLL
 
+#define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
 #define CONFIG_MEM_INIT_VALUE	0xDeadBeef
 
-#define CFG_DDR_SDRAM_BASE	0x00000000
-#define CFG_SDRAM_BASE		CFG_DDR_SDRAM_BASE
+#define CONFIG_SYS_DDR_SDRAM_BASE	0x00000000
+#define CONFIG_SYS_SDRAM_BASE		CONFIG_SYS_DDR_SDRAM_BASE
 
 #define CONFIG_NUM_DDR_CONTROLLERS	2
 #define CONFIG_DIMM_SLOTS_PER_CTLR	1
 #define CONFIG_CHIP_SELECTS_PER_CTRL	2
 
 /* I2C addresses of SPD EEPROMs */
+#define CONFIG_SYS_SPD_BUS_NUM		1	/* SPD EEPROMS locate on I2C bus 1 */
 #define SPD_EEPROM_ADDRESS1	0x51	/* CTLR 0 DIMM 0 */
 #define SPD_EEPROM_ADDRESS2	0x52	/* CTLR 1 DIMM 0 */
 
 /* These are used when DDR doesn't use SPD.  */
-#define CFG_SDRAM_SIZE		256		/* DDR is 256MB */
-#define CFG_DDR_CS0_BNDS	0x0000001F
-#define CFG_DDR_CS0_CONFIG	0x80010102	/* Enable, no interleaving */
-#define CFG_DDR_TIMING_3	0x00000000
-#define CFG_DDR_TIMING_0	0x00260802
-#define CFG_DDR_TIMING_1	0x3935d322
-#define CFG_DDR_TIMING_2	0x14904cc8
-#define CFG_DDR_MODE_1		0x00480432
-#define CFG_DDR_MODE_2		0x00000000
-#define CFG_DDR_INTERVAL	0x06180100
-#define CFG_DDR_DATA_INIT	0xdeadbeef
-#define CFG_DDR_CLK_CTRL	0x03800000
-#define CFG_DDR_OCD_CTRL	0x00000000
-#define CFG_DDR_OCD_STATUS	0x00000000
-#define CFG_DDR_CONTROL		0xC3008000	/* Type = DDR2 */
-#define CFG_DDR_CONTROL2	0x04400010
-
-#define CFG_DDR_ERR_INT_EN	0x0000000d
-#define CFG_DDR_ERR_DIS		0x00000000
-#define CFG_DDR_SBE		0x00010000
-
-/*
- * FIXME: Not used in fixed_sdram function
- */
-#define CFG_DDR_MODE		0x00000022
-#define CFG_DDR_CS1_BNDS	0x00000000
-#define CFG_DDR_CS2_BNDS	0x00000FFF	/* Not done */
-#define CFG_DDR_CS3_BNDS	0x00000FFF	/* Not done */
-#define CFG_DDR_CS4_BNDS	0x00000FFF	/* Not done */
-#define CFG_DDR_CS5_BNDS	0x00000FFF	/* Not done */
+#define CONFIG_SYS_SDRAM_SIZE		512		/* DDR is 512MB */
+#define CONFIG_SYS_DDR_CS0_BNDS		0x0000001F
+#define CONFIG_SYS_DDR_CS0_CONFIG	0x80010202	/* Enable, no interleaving */
+#define CONFIG_SYS_DDR_TIMING_3		0x00020000
+#define CONFIG_SYS_DDR_TIMING_0		0x00260802
+#define CONFIG_SYS_DDR_TIMING_1		0x626b2634
+#define CONFIG_SYS_DDR_TIMING_2		0x062874cf
+#define CONFIG_SYS_DDR_MODE_1		0x00440462
+#define CONFIG_SYS_DDR_MODE_2		0x00000000
+#define CONFIG_SYS_DDR_INTERVAL		0x0c300100
+#define CONFIG_SYS_DDR_DATA_INIT	0xdeadbeef
+#define CONFIG_SYS_DDR_CLK_CTRL		0x00800000
+#define CONFIG_SYS_DDR_OCD_CTRL		0x00000000
+#define CONFIG_SYS_DDR_OCD_STATUS	0x00000000
+#define CONFIG_SYS_DDR_CONTROL		0xc3000008	/* Type = DDR2 */
+#define CONFIG_SYS_DDR_CONTROL2		0x24400000
+
+#define CONFIG_SYS_DDR_ERR_INT_EN	0x0000000d
+#define CONFIG_SYS_DDR_ERR_DIS		0x00000000
+#define CONFIG_SYS_DDR_SBE		0x00010000
 
 /*
  * Make sure required options are set
@@ -166,6 +158,7 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy);
  * Localbus non-cacheable
  * 0xe000_0000	0xe80f_ffff	Promjet/free		128M non-cacheable
  * 0xe800_0000	0xefff_ffff	FLASH			128M non-cacheable
+ * 0xffa0_0000	0xffaf_ffff	NAND			1M non-cacheable
  * 0xffdf_0000	0xffdf_7fff	PIXIS			32K non-cacheable TLB0
  * 0xffd0_0000	0xffd0_3fff	L1 for stack		16K Cacheable TLB0
  * 0xffe0_0000	0xffef_ffff	CCSR			1M non-cacheable
@@ -174,38 +167,38 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy);
 /*
  * Local Bus Definitions
  */
-#define CFG_FLASH_BASE		0xe0000000	/* start of FLASH 128M */
+#define CONFIG_SYS_FLASH_BASE		0xe0000000	/* start of FLASH 128M */
 
-#define CFG_BR0_PRELIM		0xe8001001
-#define CFG_OR0_PRELIM		0xf8000ff7
+#define CONFIG_SYS_BR0_PRELIM		0xe8001001
+#define CONFIG_SYS_OR0_PRELIM		0xf8000ff7
 
-#define CFG_BR1_PRELIM		0xe0001001
-#define CFG_OR1_PRELIM		0xf8000ff7
+#define CONFIG_SYS_BR1_PRELIM		0xe0001001
+#define CONFIG_SYS_OR1_PRELIM		0xf8000ff7
 
-#define CFG_FLASH_BANKS_LIST	{CFG_FLASH_BASE + 0x8000000, CFG_FLASH_BASE}
-#define CFG_FLASH_QUIET_TEST
+#define CONFIG_SYS_FLASH_BANKS_LIST	{CONFIG_SYS_FLASH_BASE + 0x8000000, CONFIG_SYS_FLASH_BASE}
+#define CONFIG_SYS_FLASH_QUIET_TEST
 #define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */
 
-#define CFG_MAX_FLASH_BANKS	2		/* number of banks */
-#define CFG_MAX_FLASH_SECT	1024		/* sectors per device */
-#undef	CFG_FLASH_CHECKSUM
-#define CFG_FLASH_ERASE_TOUT	60000		/* Flash Erase Timeout (ms) */
-#define CFG_FLASH_WRITE_TOUT	500		/* Flash Write Timeout (ms) */
+#define CONFIG_SYS_MAX_FLASH_BANKS	2		/* number of banks */
+#define CONFIG_SYS_MAX_FLASH_SECT	1024		/* sectors per device */
+#undef	CONFIG_SYS_FLASH_CHECKSUM
+#define CONFIG_SYS_FLASH_ERASE_TOUT	60000		/* Flash Erase Timeout (ms) */
+#define CONFIG_SYS_FLASH_WRITE_TOUT	500		/* Flash Write Timeout (ms) */
 
-#define CFG_MONITOR_BASE	TEXT_BASE	/* start of monitor */
+#define CONFIG_SYS_MONITOR_BASE	TEXT_BASE	/* start of monitor */
 
 #define CONFIG_FLASH_CFI_DRIVER
-#define CFG_FLASH_CFI
-#define CFG_FLASH_EMPTY_INFO
-#define CFG_FLASH_AMD_CHECK_DQ7
+#define CONFIG_SYS_FLASH_CFI
+#define CONFIG_SYS_FLASH_EMPTY_INFO
+#define CONFIG_SYS_FLASH_AMD_CHECK_DQ7
 
 #define CONFIG_BOARD_EARLY_INIT_R	/* call board_early_init_r function */
 
 #define CONFIG_FSL_PIXIS	1	/* use common PIXIS code */
 #define PIXIS_BASE	0xffdf0000	/* PIXIS registers */
 
-#define CFG_BR3_PRELIM	(PIXIS_BASE | 0x0801)	/* port size 8bit */
-#define CFG_OR3_PRELIM		0xffffeff7	/* 32KB but only 4k mapped */
+#define CONFIG_SYS_BR3_PRELIM	(PIXIS_BASE | 0x0801)	/* port size 8bit */
+#define CONFIG_SYS_OR3_PRELIM		0xffffeff7	/* 32KB but only 4k mapped */
 
 #define PIXIS_ID		0x0	/* Board ID at offset 0 */
 #define PIXIS_VER		0x1	/* Board version at offset 1 */
@@ -237,20 +230,86 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy);
 /* old pixis referenced names */
 #define PIXIS_VCLKH		0x19	/* VELA VCLKH register */
 #define PIXIS_VCLKL		0x1A	/* VELA VCLKL register */
-#define CFG_PIXIS_VBOOT_MASK	0xc0
-
-/* define to use L1 as initial stack */
-#define CONFIG_L1_INIT_RAM
-#define CFG_INIT_RAM_LOCK	1
-#define CFG_INIT_RAM_ADDR	0xffd00000	/* Initial L1 address */
-#define CFG_INIT_RAM_END	0x00004000	/* End of used area in RAM */
+#define CONFIG_SYS_PIXIS_VBOOT_MASK	0xc0
+#define PIXIS_VSPEED2_TSEC1SER	0x8
+#define PIXIS_VSPEED2_TSEC2SER	0x4
+#define PIXIS_VSPEED2_TSEC3SER	0x2
+#define PIXIS_VSPEED2_TSEC4SER	0x1
+#define PIXIS_VCFGEN1_TSEC1SER	0x20
+#define PIXIS_VCFGEN1_TSEC2SER	0x20
+#define PIXIS_VCFGEN1_TSEC3SER	0x20
+#define PIXIS_VCFGEN1_TSEC4SER	0x20
+#define PIXIS_VSPEED2_MASK	(PIXIS_VSPEED2_TSEC1SER \
+					| PIXIS_VSPEED2_TSEC2SER \
+					| PIXIS_VSPEED2_TSEC3SER \
+					| PIXIS_VSPEED2_TSEC4SER)
+#define PIXIS_VCFGEN1_MASK	(PIXIS_VCFGEN1_TSEC1SER \
+					| PIXIS_VCFGEN1_TSEC2SER \
+					| PIXIS_VCFGEN1_TSEC3SER \
+					| PIXIS_VCFGEN1_TSEC4SER)
+
+#define CONFIG_SYS_INIT_RAM_LOCK	1
+#define CONFIG_SYS_INIT_RAM_ADDR	0xffd00000	/* Initial L1 address */
+#define CONFIG_SYS_INIT_RAM_END	0x00004000	/* End of used area in RAM */
+
+#define CONFIG_SYS_GBL_DATA_SIZE	128	/* num bytes initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
+
+#define CONFIG_SYS_MONITOR_LEN		(256 * 1024) /* Reserve 256 kB for Mon */
+#define CONFIG_SYS_MALLOC_LEN		(1024 * 1024)	/* Reserved for malloc */
+
+#define CONFIG_SYS_NAND_BASE		0xffa00000
+#define CONFIG_SYS_NAND_BASE_PHYS	CONFIG_SYS_NAND_BASE
+#define CONFIG_SYS_NAND_BASE_LIST     { CONFIG_SYS_NAND_BASE,\
+				CONFIG_SYS_NAND_BASE + 0x40000, \
+				CONFIG_SYS_NAND_BASE + 0x80000,\
+				CONFIG_SYS_NAND_BASE + 0xC0000}
+#define CONFIG_SYS_MAX_NAND_DEVICE    4
+#define NAND_MAX_CHIPS		1
+#define CONFIG_MTD_NAND_VERIFY_WRITE
+#define CONFIG_CMD_NAND		1
+#define CONFIG_NAND_FSL_ELBC	1
+#define CONFIG_SYS_NAND_BLOCK_SIZE    (128 * 1024)
+
+/* NAND flash config */
+#define CONFIG_NAND_BR_PRELIM  (CONFIG_SYS_NAND_BASE_PHYS \
+			       | (2<<BR_DECC_SHIFT)    /* Use HW ECC */ \
+			       | BR_PS_8	       /* Port Size = 8 bit */ \
+			       | BR_MS_FCM	       /* MSEL = FCM */ \
+			       | BR_V)		       /* valid */
+#define CONFIG_NAND_OR_PRELIM  (0xFFFC0000	      /* length 256K */ \
+			       | OR_FCM_PGS	       /* Large Page*/ \
+			       | OR_FCM_CSCT \
+			       | OR_FCM_CST \
+			       | OR_FCM_CHT \
+			       | OR_FCM_SCY_1 \
+			       | OR_FCM_TRLX \
+			       | OR_FCM_EHTR)
+
+#define CONFIG_SYS_BR2_PRELIM  CONFIG_NAND_BR_PRELIM  /* NAND Base Address */
+#define CONFIG_SYS_OR2_PRELIM  CONFIG_NAND_OR_PRELIM  /* NAND Options */
+
+#define CONFIG_SYS_BR4_PRELIM  ((CONFIG_SYS_NAND_BASE_PHYS + 0x40000)\
+			       | (2<<BR_DECC_SHIFT)    /* Use HW ECC */ \
+			       | BR_PS_8	       /* Port Size = 8 bit */ \
+			       | BR_MS_FCM	       /* MSEL = FCM */ \
+			       | BR_V)		       /* valid */
+#define CONFIG_SYS_OR4_PRELIM  CONFIG_NAND_OR_PRELIM	 /* NAND Options */
+#define CONFIG_SYS_BR5_PRELIM  ((CONFIG_SYS_NAND_BASE_PHYS + 0x80000)\
+			       | (2<<BR_DECC_SHIFT)    /* Use HW ECC */ \
+			       | BR_PS_8	       /* Port Size = 8 bit */ \
+			       | BR_MS_FCM	       /* MSEL = FCM */ \
+			       | BR_V)		       /* valid */
+#define CONFIG_SYS_OR5_PRELIM  CONFIG_NAND_OR_PRELIM	 /* NAND Options */
+
+#define CONFIG_SYS_BR6_PRELIM  ((CONFIG_SYS_NAND_BASE_PHYS + 0xC0000)\
+			       | (2<<BR_DECC_SHIFT)    /* Use HW ECC */ \
+			       | BR_PS_8	       /* Port Size = 8 bit */ \
+			       | BR_MS_FCM	       /* MSEL = FCM */ \
+			       | BR_V)		       /* valid */
+#define CONFIG_SYS_OR6_PRELIM  CONFIG_NAND_OR_PRELIM	 /* NAND Options */
 
-#define CFG_GBL_DATA_SIZE	128	/* num bytes initial data */
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
-
-#define CFG_MONITOR_LEN		(256 * 1024) /* Reserve 256 kB for Mon */
-#define CFG_MALLOC_LEN		(1024 * 1024)	/* Reserved for malloc */
 
 /* Serial Port - controlled on board with jumper J8
  * open - index 2
@@ -258,21 +317,21 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy);
  */
 #define CONFIG_CONS_INDEX	1
 #undef	CONFIG_SERIAL_SOFTWARE_FIFO
-#define CFG_NS16550
-#define CFG_NS16550_SERIAL
-#define CFG_NS16550_REG_SIZE	1
-#define CFG_NS16550_CLK		get_bus_freq(0)
+#define CONFIG_SYS_NS16550
+#define CONFIG_SYS_NS16550_SERIAL
+#define CONFIG_SYS_NS16550_REG_SIZE	1
+#define CONFIG_SYS_NS16550_CLK		get_bus_freq(0)
 
-#define CFG_BAUDRATE_TABLE	\
+#define CONFIG_SYS_BAUDRATE_TABLE	\
 	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200}
 
-#define CFG_NS16550_COM1	(CFG_CCSRBAR+0x4500)
-#define CFG_NS16550_COM2	(CFG_CCSRBAR+0x4600)
+#define CONFIG_SYS_NS16550_COM1	(CONFIG_SYS_CCSRBAR+0x4500)
+#define CONFIG_SYS_NS16550_COM2	(CONFIG_SYS_CCSRBAR+0x4600)
 
 /* Use the HUSH parser */
-#define CFG_HUSH_PARSER
-#ifdef	CFG_HUSH_PARSER
-#define CFG_PROMPT_HUSH_PS2 "> "
+#define CONFIG_SYS_HUSH_PARSER
+#ifdef	CONFIG_SYS_HUSH_PARSER
+#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
 #endif
 
 /*
@@ -282,8 +341,8 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy);
 #define CONFIG_OF_BOARD_SETUP		1
 #define CONFIG_OF_STDOUT_VIA_ALIAS	1
 
-#define CFG_64BIT_VSPRINTF	1
-#define CFG_64BIT_STRTOUL	1
+#define CONFIG_SYS_64BIT_VSPRINTF	1
+#define CONFIG_SYS_64BIT_STRTOUL	1
 
 /* new uImage format support */
 #define CONFIG_FIT		1
@@ -293,50 +352,59 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy);
 #define CONFIG_FSL_I2C		/* Use FSL common I2C driver */
 #define CONFIG_HARD_I2C		/* I2C with hardware support */
 #undef	CONFIG_SOFT_I2C		/* I2C bit-banged */
-#define CFG_I2C_SPEED		400000	/* I2C speed and slave address */
-#define CFG_I2C_EEPROM_ADDR	0x57
-#define CFG_I2C_SLAVE		0x7F
-#define CFG_I2C_NOPROBES	{0x69}	/* Don't probe these addrs */
-#define CFG_I2C_OFFSET		0x3100
+#define CONFIG_I2C_MULTI_BUS
+#define CONFIG_I2C_CMD_TREE
+#define CONFIG_SYS_I2C_SPEED		400000	/* I2C speed and slave address */
+#define CONFIG_SYS_I2C_EEPROM_ADDR	0x57
+#define CONFIG_SYS_I2C_SLAVE		0x7F
+#define CONFIG_SYS_I2C_NOPROBES	{{0,0x29}}/* Don't probe these addrs */
+#define CONFIG_SYS_I2C_OFFSET		0x3000
+#define CONFIG_SYS_I2C2_OFFSET		0x3100
+
+/*
+ * I2C2 EEPROM
+ */
+#define CONFIG_ID_EEPROM
+#ifdef CONFIG_ID_EEPROM
+#define CONFIG_SYS_I2C_EEPROM_NXID
+#endif
+#define CONFIG_SYS_I2C_EEPROM_ADDR	0x57
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
+#define CONFIG_SYS_EEPROM_BUS_NUM	1
 
 /*
  * General PCI
  * Memory space is mapped 1-1, but I/O space must start from 0.
  */
 
-/* PCI view of System Memory */
-#define CFG_PCI_MEMORY_BUS	0x00000000
-#define CFG_PCI_MEMORY_PHYS	0x00000000
-#define CFG_PCI_MEMORY_SIZE	0x80000000
-
 /* controller 3, direct to uli, tgtid 3, Base address 8000 */
-#define CFG_PCIE3_MEM_BASE	0x80000000
-#define CFG_PCIE3_MEM_PHYS	CFG_PCIE3_MEM_BASE
-#define CFG_PCIE3_MEM_SIZE	0x20000000	/* 512M */
-#define CFG_PCIE3_IO_BASE	0x00000000
-#define CFG_PCIE3_IO_PHYS	0xffc00000
-#define CFG_PCIE3_IO_SIZE	0x00010000	/* 64k */
+#define CONFIG_SYS_PCIE3_MEM_BASE	0x80000000
+#define CONFIG_SYS_PCIE3_MEM_PHYS	CONFIG_SYS_PCIE3_MEM_BASE
+#define CONFIG_SYS_PCIE3_MEM_SIZE	0x20000000	/* 512M */
+#define CONFIG_SYS_PCIE3_IO_BASE	0x00000000
+#define CONFIG_SYS_PCIE3_IO_PHYS	0xffc00000
+#define CONFIG_SYS_PCIE3_IO_SIZE	0x00010000	/* 64k */
 
 /* controller 2, Slot 2, tgtid 2, Base address 9000 */
-#define CFG_PCIE2_MEM_BASE	0xa0000000
-#define CFG_PCIE2_MEM_PHYS	CFG_PCIE2_MEM_BASE
-#define CFG_PCIE2_MEM_SIZE	0x20000000	/* 512M */
-#define CFG_PCIE2_IO_BASE	0x00000000
-#define CFG_PCIE2_IO_PHYS	0xffc10000
-#define CFG_PCIE2_IO_SIZE	0x00010000	/* 64k */
+#define CONFIG_SYS_PCIE2_MEM_BASE	0xa0000000
+#define CONFIG_SYS_PCIE2_MEM_PHYS	CONFIG_SYS_PCIE2_MEM_BASE
+#define CONFIG_SYS_PCIE2_MEM_SIZE	0x20000000	/* 512M */
+#define CONFIG_SYS_PCIE2_IO_BASE	0x00000000
+#define CONFIG_SYS_PCIE2_IO_PHYS	0xffc10000
+#define CONFIG_SYS_PCIE2_IO_SIZE	0x00010000	/* 64k */
 
 /* controller 1, Slot 1, tgtid 1, Base address a000 */
-#define CFG_PCIE1_MEM_BASE	0xc0000000
-#define CFG_PCIE1_MEM_PHYS	CFG_PCIE1_MEM_BASE
-#define CFG_PCIE1_MEM_SIZE	0x20000000	/* 512M */
-#define CFG_PCIE1_IO_BASE	0x00000000
-#define CFG_PCIE1_IO_PHYS	0xffc20000
-#define CFG_PCIE1_IO_SIZE	0x00010000	/* 64k */
+#define CONFIG_SYS_PCIE1_MEM_BASE	0xc0000000
+#define CONFIG_SYS_PCIE1_MEM_PHYS	CONFIG_SYS_PCIE1_MEM_BASE
+#define CONFIG_SYS_PCIE1_MEM_SIZE	0x20000000	/* 512M */
+#define CONFIG_SYS_PCIE1_IO_BASE	0x00000000
+#define CONFIG_SYS_PCIE1_IO_PHYS	0xffc20000
+#define CONFIG_SYS_PCIE1_IO_SIZE	0x00010000	/* 64k */
 
 #if defined(CONFIG_PCI)
 
 /*PCIE video card used*/
-#define VIDEO_IO_OFFSET		CFG_PCIE1_IO_PHYS
+#define VIDEO_IO_OFFSET		CONFIG_SYS_PCIE1_IO_PHYS
 
 /* video */
 #define CONFIG_VIDEO
@@ -349,7 +417,7 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy);
 #define CONFIG_ATI_RADEON_FB
 #define CONFIG_VIDEO_LOGO
 /*#define CONFIG_CONSOLE_CURSOR*/
-#define CFG_ISA_IO_BASE_ADDRESS VIDEO_IO_OFFSET
+#define CONFIG_SYS_ISA_IO_BASE_ADDRESS VIDEO_IO_OFFSET
 #endif
 
 #define CONFIG_NET_MULTI
@@ -366,8 +434,8 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy);
 #endif
 
 #ifndef CONFIG_PCI_PNP
-	#define PCI_ENET0_IOADDR	CFG_PCIE3_IO_BASE
-	#define PCI_ENET0_MEMADDR	CFG_PCIE3_IO_BASE
+	#define PCI_ENET0_IOADDR	CONFIG_SYS_PCIE3_IO_BASE
+	#define PCI_ENET0_MEMADDR	CONFIG_SYS_PCIE3_IO_BASE
 	#define PCI_IDSEL_NUMBER	0x11	/* IDSEL = AD11 */
 #endif
 
@@ -377,10 +445,10 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy);
 
 #ifdef CONFIG_SCSI_AHCI
 #define CONFIG_SATA_ULI5288
-#define CFG_SCSI_MAX_SCSI_ID	4
-#define CFG_SCSI_MAX_LUN	1
-#define CFG_SCSI_MAX_DEVICE	(CFG_SCSI_MAX_SCSI_ID * CFG_SCSI_MAX_LUN)
-#define CFG_SCSI_MAXDEVICE	CFG_SCSI_MAX_DEVICE
+#define CONFIG_SYS_SCSI_MAX_SCSI_ID	4
+#define CONFIG_SYS_SCSI_MAX_LUN	1
+#define CONFIG_SYS_SCSI_MAX_DEVICE	(CONFIG_SYS_SCSI_MAX_SCSI_ID * CONFIG_SYS_SCSI_MAX_LUN)
+#define CONFIG_SYS_SCSI_MAXDEVICE	CONFIG_SYS_SCSI_MAX_DEVICE
 #endif /* SCSI */
 
 #endif	/* CONFIG_PCI */
@@ -403,6 +471,14 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy);
 #define CONFIG_TSEC4	1
 #define CONFIG_TSEC4_NAME	"eTSEC4"
 
+#define CONFIG_PIXIS_SGMII_CMD
+#define CONFIG_FSL_SGMII_RISER	1
+#define SGMII_RISER_PHY_OFFSET	0x1c
+
+#ifdef CONFIG_FSL_SGMII_RISER
+#define CONFIG_SYS_TBIPA_VALUE		0x10 /* avoid conflict with eTSEC4 paddr */
+#endif
+
 #define TSEC1_PHY_ADDR		0
 #define TSEC2_PHY_ADDR		1
 #define TSEC3_PHY_ADDR		2
@@ -426,17 +502,17 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy);
 /*
  * Environment
  */
-#define CFG_ENV_IS_IN_FLASH	1
-#if CFG_MONITOR_BASE > 0xfff80000
-#define CFG_ENV_ADDR		0xfff80000
+#define CONFIG_ENV_IS_IN_FLASH	1
+#if CONFIG_SYS_MONITOR_BASE > 0xfff80000
+#define CONFIG_ENV_ADDR		0xfff80000
 #else
-#define CFG_ENV_ADDR		(CFG_MONITOR_BASE + 0x70000)
+#define CONFIG_ENV_ADDR		(CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
 #endif
-#define CFG_ENV_SIZE		0x2000
-#define CFG_ENV_SECT_SIZE	0x20000 /* 128K (one sector) */
+#define CONFIG_ENV_SIZE		0x2000
+#define CONFIG_ENV_SECT_SIZE	0x20000 /* 128K (one sector) */
 
 #define CONFIG_LOADS_ECHO	1	/* echo on for serial download */
-#define CFG_LOADS_BAUD_CHANGE	1	/* allow baudrate change */
+#define CONFIG_SYS_LOADS_BAUD_CHANGE	1	/* allow baudrate change */
 
 /*
  * Command line configuration.
@@ -448,6 +524,8 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy);
 #define CONFIG_CMD_I2C
 #define CONFIG_CMD_MII
 #define CONFIG_CMD_ELF
+#define CONFIG_CMD_IRQ
+#define CONFIG_CMD_SETEXPR
 
 #if defined(CONFIG_PCI)
 #define CONFIG_CMD_PCI
@@ -462,26 +540,26 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy);
 /*
  * Miscellaneous configurable options
  */
-#define CFG_LONGHELP			/* undef to save memory	*/
+#define CONFIG_SYS_LONGHELP			/* undef to save memory	*/
 #define CONFIG_CMDLINE_EDITING		/* Command-line editing */
-#define CFG_LOAD_ADDR	0x2000000	/* default load address */
-#define CFG_PROMPT	"=> "		/* Monitor Command Prompt */
+#define CONFIG_SYS_LOAD_ADDR	0x2000000	/* default load address */
+#define CONFIG_SYS_PROMPT	"=> "		/* Monitor Command Prompt */
 #if defined(CONFIG_CMD_KGDB)
-#define CFG_CBSIZE	1024		/* Console I/O Buffer Size */
+#define CONFIG_SYS_CBSIZE	1024		/* Console I/O Buffer Size */
 #else
-#define CFG_CBSIZE	256		/* Console I/O Buffer Size */
+#define CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size */
 #endif
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define CFG_MAXARGS	16		/* max number of command args */
-#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size */
-#define CFG_HZ		1000		/* decrementer freq: 1ms ticks */
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS	16		/* max number of command args */
+#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size */
+#define CONFIG_SYS_HZ		1000		/* decrementer freq: 1ms ticks */
 
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define CFG_BOOTMAPSZ	(8 << 20)	/* Initial Memory map for Linux*/
+#define CONFIG_SYS_BOOTMAPSZ	(8 << 20)	/* Initial Memory map for Linux*/
 
 /*
  * Internal Definitions
@@ -532,6 +610,7 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy);
 #define CONFIG_BAUDRATE	115200
 
 #define	CONFIG_EXTRA_ENV_SETTINGS				\
+ "memctl_intlv_ctl=2\0"						\
  "netdev=eth0\0"						\
  "uboot=" MK_STR(CONFIG_UBOOTPATH) "\0"				\
  "tftpflash=tftpboot $loadaddr $uboot; "			\
diff --git a/include/configs/MPC8610HPCD.h b/include/configs/MPC8610HPCD.h
index 0c1c4fc7c..27517e5b1 100644
--- a/include/configs/MPC8610HPCD.h
+++ b/include/configs/MPC8610HPCD.h
@@ -31,16 +31,23 @@
 #endif
 
 #ifdef RUN_DIAG
-#define CFG_DIAG_ADDR		0xff800000
+#define CONFIG_SYS_DIAG_ADDR		0xff800000
 #endif
 
-#define CFG_RESET_ADDRESS	0xfff00100
+#define CONFIG_SYS_RESET_ADDRESS	0xfff00100
+
+/*
+ * virtual address to be used for temporary mappings.  There
+ * should be 128k free at this VA.
+ */
+#define CONFIG_SYS_SCRATCH_VA	0xc0000000
 
 #define CONFIG_PCI		1	/* Enable PCI/PCIE*/
 #define CONFIG_PCI1		1	/* PCI controler 1 */
 #define CONFIG_PCIE1		1	/* PCIe 1 connected to ULI bridge */
 #define CONFIG_PCIE2		1	/* PCIe 2 connected to slot */
 #define CONFIG_FSL_PCI_INIT	1	/* Use common FSL init code */
+#define CONFIG_SYS_PCI_64BIT	1	/* enable 64-bit PCI resources */
 #define CONFIG_FSL_LAW		1	/* Use common FSL init code */
 
 #define CONFIG_ENV_OVERWRITE
@@ -52,7 +59,7 @@
 /*
  * L2CR setup -- make sure this is right for your board!
  */
-#define CFG_L2
+#define CONFIG_SYS_L2
 #define L2_INIT		0
 #define L2_ENABLE	(L2CR_L2E |0x00100000 )
 
@@ -63,22 +70,25 @@
 #define CONFIG_BOARD_EARLY_INIT_F	1	/* Call board_pre_init */
 #define CONFIG_MISC_INIT_R		1
 
-#define CFG_MEMTEST_START	0x00200000	/* memtest region */
-#define CFG_MEMTEST_END		0x00400000
+#define CONFIG_SYS_MEMTEST_START	0x00200000	/* memtest region */
+#define CONFIG_SYS_MEMTEST_END		0x00400000
 
 /*
  * Base addresses -- Note these are effective addresses where the
  * actual resources get mapped (not physical addresses)
  */
-#define CFG_CCSRBAR_DEFAULT	0xff700000	/* CCSRBAR Default */
-#define CFG_CCSRBAR		0xe0000000	/* relocated CCSRBAR */
-#define CFG_IMMR		CFG_CCSRBAR	/* PQII uses CFG_IMMR */
+#define CONFIG_SYS_CCSRBAR_DEFAULT	0xff700000	/* CCSRBAR Default */
+#define CONFIG_SYS_CCSRBAR		0xe0000000	/* relocated CCSRBAR */
+#define CONFIG_SYS_IMMR		CONFIG_SYS_CCSRBAR	/* PQII uses CONFIG_SYS_IMMR */
+
+#define CONFIG_SYS_CCSRBAR_PHYS_LOW	CONFIG_SYS_CCSRBAR
+#define CONFIG_SYS_CCSRBAR_PHYS_HIGH	0x0
 
-#define CFG_PCI1_ADDR		(CFG_CCSRBAR+0x8000)
-#define CFG_PCIE1_ADDR		(CFG_CCSRBAR+0xa000)
-#define CFG_PCIE2_ADDR		(CFG_CCSRBAR+0x9000)
+#define CONFIG_SYS_PCI1_ADDR		(CONFIG_SYS_CCSRBAR+0x8000)
+#define CONFIG_SYS_PCIE1_ADDR		(CONFIG_SYS_CCSRBAR+0xa000)
+#define CONFIG_SYS_PCIE2_ADDR		(CONFIG_SYS_CCSRBAR+0x9000)
 
-#define CFG_DIU_ADDR		(CFG_CCSRBAR+0x2c000)
+#define CONFIG_SYS_DIU_ADDR		(CONFIG_SYS_CCSRBAR+0x2c000)
 
 /* DDR Setup */
 #define CONFIG_FSL_DDR2
@@ -89,8 +99,9 @@
 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER	/* DDR controller or DMA? */
 #define CONFIG_MEM_INIT_VALUE	0xDeadBeef
 
-#define CFG_DDR_SDRAM_BASE	0x00000000	/* DDR is system memory*/
-#define CFG_SDRAM_BASE		CFG_DDR_SDRAM_BASE
+#define CONFIG_SYS_DDR_SDRAM_BASE	0x00000000	/* DDR is system memory*/
+#define CONFIG_SYS_SDRAM_BASE		CONFIG_SYS_DDR_SDRAM_BASE
+#define CONFIG_SYS_MAX_DDR_BAT_SIZE	0x80000000	/* BAT mapping size */
 #define CONFIG_VERY_BIG_RAM
 
 #define MPC86xx_DDR_SDRAM_CLK_CNTL
@@ -102,64 +113,55 @@
 #define SPD_EEPROM_ADDRESS1	0x51	/* CTLR 0 DIMM 0 */
 
 /* These are used when DDR doesn't use SPD.  */
-#define CFG_SDRAM_SIZE	256		/* DDR is 256MB */
+#define CONFIG_SYS_SDRAM_SIZE	256		/* DDR is 256MB */
 
 #if 0 /* TODO */
-#define CFG_DDR_CS0_BNDS	0x0000000F
-#define CFG_DDR_CS0_CONFIG	0x80010202	/* Enable, no interleaving */
-#define CFG_DDR_TIMING_3	0x00000000
-#define CFG_DDR_TIMING_0	0x00260802
-#define CFG_DDR_TIMING_1	0x3935d322
-#define CFG_DDR_TIMING_2	0x14904cc8
-#define CFG_DDR_MODE_1		0x00480432
-#define CFG_DDR_MODE_2		0x00000000
-#define CFG_DDR_INTERVAL	0x06180100
-#define CFG_DDR_DATA_INIT	0xdeadbeef
-#define CFG_DDR_CLK_CTRL	0x03800000
-#define CFG_DDR_OCD_CTRL	0x00000000
-#define CFG_DDR_OCD_STATUS	0x00000000
-#define CFG_DDR_CONTROL		0xe3008000	/* Type = DDR2 */
-#define CFG_DDR_CONTROL2	0x04400010
-
-#define CFG_DDR_ERR_INT_EN	0x00000000
-#define CFG_DDR_ERR_DIS		0x00000000
-#define CFG_DDR_SBE		0x000f0000
+#define CONFIG_SYS_DDR_CS0_BNDS	0x0000000F
+#define CONFIG_SYS_DDR_CS0_CONFIG	0x80010202	/* Enable, no interleaving */
+#define CONFIG_SYS_DDR_TIMING_3	0x00000000
+#define CONFIG_SYS_DDR_TIMING_0	0x00260802
+#define CONFIG_SYS_DDR_TIMING_1	0x3935d322
+#define CONFIG_SYS_DDR_TIMING_2	0x14904cc8
+#define CONFIG_SYS_DDR_MODE_1		0x00480432
+#define CONFIG_SYS_DDR_MODE_2		0x00000000
+#define CONFIG_SYS_DDR_INTERVAL	0x06180100
+#define CONFIG_SYS_DDR_DATA_INIT	0xdeadbeef
+#define CONFIG_SYS_DDR_CLK_CTRL	0x03800000
+#define CONFIG_SYS_DDR_OCD_CTRL	0x00000000
+#define CONFIG_SYS_DDR_OCD_STATUS	0x00000000
+#define CONFIG_SYS_DDR_CONTROL		0xe3008000	/* Type = DDR2 */
+#define CONFIG_SYS_DDR_CONTROL2	0x04400010
+
+#define CONFIG_SYS_DDR_ERR_INT_EN	0x00000000
+#define CONFIG_SYS_DDR_ERR_DIS		0x00000000
+#define CONFIG_SYS_DDR_SBE		0x000f0000
 
-/*
- * FIXME: Not used in fixed_sdram function
- */
-#define CFG_DDR_MODE		0x00000022
-#define CFG_DDR_CS1_BNDS	0x00000000
-#define CFG_DDR_CS2_BNDS	0x00000FFF	/* Not done */
-#define CFG_DDR_CS3_BNDS	0x00000FFF	/* Not done */
-#define CFG_DDR_CS4_BNDS	0x00000FFF	/* Not done */
-#define CFG_DDR_CS5_BNDS	0x00000FFF	/* Not done */
 #endif
 
 
 #define CONFIG_ID_EEPROM
-#define CFG_I2C_EEPROM_NXID
-#define CFG_ID_EEPROM
-#define CFG_I2C_EEPROM_ADDR     0x57
-#define CFG_I2C_EEPROM_ADDR_LEN 1
+#define CONFIG_SYS_I2C_EEPROM_NXID
+#define CONFIG_ID_EEPROM
+#define CONFIG_SYS_I2C_EEPROM_ADDR     0x57
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
 
 
-#define CFG_FLASH_BASE		0xf0000000 /* start of FLASH 128M */
-#define CFG_FLASH_BASE2		0xf8000000
+#define CONFIG_SYS_FLASH_BASE		0xf0000000 /* start of FLASH 128M */
+#define CONFIG_SYS_FLASH_BASE2		0xf8000000
 
-#define CFG_FLASH_BANKS_LIST {CFG_FLASH_BASE, CFG_FLASH_BASE2}
+#define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE2}
 
-#define CFG_BR0_PRELIM		0xf8001001 /* port size 16bit */
-#define CFG_OR0_PRELIM		0xf8006e65 /* 128MB NOR Flash*/
+#define CONFIG_SYS_BR0_PRELIM		0xf8001001 /* port size 16bit */
+#define CONFIG_SYS_OR0_PRELIM		0xf8006e65 /* 128MB NOR Flash*/
 
-#define CFG_BR1_PRELIM		0xf0001001 /* port size 16bit */
-#define CFG_OR1_PRELIM		0xf8006e65 /* 128MB Promjet */
+#define CONFIG_SYS_BR1_PRELIM		0xf0001001 /* port size 16bit */
+#define CONFIG_SYS_OR1_PRELIM		0xf8006e65 /* 128MB Promjet */
 #if 0 /* TODO */
-#define CFG_BR2_PRELIM		0xf0000000
-#define CFG_OR2_PRELIM		0xf0000000 /* 256MB NAND Flash - bank 1 */
+#define CONFIG_SYS_BR2_PRELIM		0xf0000000
+#define CONFIG_SYS_OR2_PRELIM		0xf0000000 /* 256MB NAND Flash - bank 1 */
 #endif
-#define CFG_BR3_PRELIM		0xe8000801 /* port size 8bit */
-#define CFG_OR3_PRELIM		0xfff06ff7 /* 1MB PIXIS area*/
+#define CONFIG_SYS_BR3_PRELIM		0xe8000801 /* port size 8bit */
+#define CONFIG_SYS_OR3_PRELIM		0xfff06ff7 /* 1MB PIXIS area*/
 
 
 #define CONFIG_FSL_PIXIS	1	/* use common PIXIS code */
@@ -179,67 +181,67 @@
 #define PIXIS_VSPEED1		0x18	/* VELA VSpeed 1 */
 #define PIXIS_VCLKH		0x19	/* VELA VCLKH register */
 #define PIXIS_VCLKL		0x1A	/* VELA VCLKL register */
-#define CFG_PIXIS_VBOOT_MASK	0x0C    /* Reset altbank mask*/
+#define CONFIG_SYS_PIXIS_VBOOT_MASK	0x0C    /* Reset altbank mask*/
 
-#define CFG_MAX_FLASH_BANKS	2		/* number of banks */
-#define CFG_MAX_FLASH_SECT	1024		/* sectors per device */
+#define CONFIG_SYS_MAX_FLASH_BANKS	2		/* number of banks */
+#define CONFIG_SYS_MAX_FLASH_SECT	1024		/* sectors per device */
 
-#undef	CFG_FLASH_CHECKSUM
-#define CFG_FLASH_ERASE_TOUT	60000	/* Flash Erase Timeout (ms) */
-#define CFG_FLASH_WRITE_TOUT	500	/* Flash Write Timeout (ms) */
-#define CFG_MONITOR_BASE	TEXT_BASE	/* start of monitor */
+#undef	CONFIG_SYS_FLASH_CHECKSUM
+#define CONFIG_SYS_FLASH_ERASE_TOUT	60000	/* Flash Erase Timeout (ms) */
+#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Flash Write Timeout (ms) */
+#define CONFIG_SYS_MONITOR_BASE	TEXT_BASE	/* start of monitor */
+#define CONFIG_SYS_MONITOR_BASE_EARLY   0xfff00000	/* early monitor loc */
 
 #define CONFIG_FLASH_CFI_DRIVER
-#define CFG_FLASH_CFI
-#define CFG_FLASH_EMPTY_INFO
+#define CONFIG_SYS_FLASH_CFI
+#define CONFIG_SYS_FLASH_EMPTY_INFO
 
-#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
-#define CFG_RAMBOOT
+#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
+#define CONFIG_SYS_RAMBOOT
 #else
-#undef	CFG_RAMBOOT
+#undef	CONFIG_SYS_RAMBOOT
 #endif
 
-#if defined(CFG_RAMBOOT)
+#if defined(CONFIG_SYS_RAMBOOT)
 #undef CONFIG_SPD_EEPROM
-#define CFG_SDRAM_SIZE	256
+#define CONFIG_SYS_SDRAM_SIZE	256
 #endif
 
 #undef CONFIG_CLOCKS_IN_MHZ
 
-#define CONFIG_L1_INIT_RAM
-#define CFG_INIT_RAM_LOCK	1
-#ifndef CFG_INIT_RAM_LOCK
-#define CFG_INIT_RAM_ADDR	0xe4010000	/* Initial RAM address */
+#define CONFIG_SYS_INIT_RAM_LOCK	1
+#ifndef CONFIG_SYS_INIT_RAM_LOCK
+#define CONFIG_SYS_INIT_RAM_ADDR	0xe4010000	/* Initial RAM address */
 #else
-#define CFG_INIT_RAM_ADDR	0xe4000000	/* Initial RAM address */
+#define CONFIG_SYS_INIT_RAM_ADDR	0xe4000000	/* Initial RAM address */
 #endif
-#define CFG_INIT_RAM_END	0x4000		/* End of used area in RAM */
+#define CONFIG_SYS_INIT_RAM_END	0x4000		/* End of used area in RAM */
 
-#define CFG_GBL_DATA_SIZE	128		/* num bytes initial data */
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_GBL_DATA_SIZE	128		/* num bytes initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
-#define CFG_MONITOR_LEN		(512 * 1024)	/* Reserve 512 KB for Mon */
-#define CFG_MALLOC_LEN		(6 * 1024 * 1024)	/* Reserved for malloc */
+#define CONFIG_SYS_MONITOR_LEN		(512 * 1024)	/* Reserve 512 KB for Mon */
+#define CONFIG_SYS_MALLOC_LEN		(6 * 1024 * 1024)	/* Reserved for malloc */
 
 /* Serial Port */
 #define CONFIG_CONS_INDEX	1
 #undef	CONFIG_SERIAL_SOFTWARE_FIFO
-#define CFG_NS16550
-#define CFG_NS16550_SERIAL
-#define CFG_NS16550_REG_SIZE	1
-#define CFG_NS16550_CLK		get_bus_freq(0)
+#define CONFIG_SYS_NS16550
+#define CONFIG_SYS_NS16550_SERIAL
+#define CONFIG_SYS_NS16550_REG_SIZE	1
+#define CONFIG_SYS_NS16550_CLK		get_bus_freq(0)
 
-#define CFG_BAUDRATE_TABLE \
+#define CONFIG_SYS_BAUDRATE_TABLE \
 	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 115200}
 
-#define CFG_NS16550_COM1	(CFG_CCSRBAR+0x4500)
-#define CFG_NS16550_COM2	(CFG_CCSRBAR+0x4600)
+#define CONFIG_SYS_NS16550_COM1	(CONFIG_SYS_CCSRBAR+0x4500)
+#define CONFIG_SYS_NS16550_COM2	(CONFIG_SYS_CCSRBAR+0x4600)
 
 /* Use the HUSH parser */
-#define CFG_HUSH_PARSER
-#ifdef	CFG_HUSH_PARSER
-#define CFG_PROMPT_HUSH_PS2 "> "
+#define CONFIG_SYS_HUSH_PARSER
+#ifdef	CONFIG_SYS_HUSH_PARSER
+#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
 #endif
 
 /*
@@ -253,8 +255,8 @@
 /* maximum size of the flat tree (8K) */
 #define OF_FLAT_TREE_MAX_SIZE	8192
 
-#define CFG_64BIT_VSPRINTF	1
-#define CFG_64BIT_STRTOUL	1
+#define CONFIG_SYS_64BIT_VSPRINTF	1
+#define CONFIG_SYS_64BIT_STRTOUL	1
 
 /*
  * I2C
@@ -262,46 +264,41 @@
 #define CONFIG_FSL_I2C		/* Use FSL common I2C driver */
 #define CONFIG_HARD_I2C		/* I2C with hardware support*/
 #undef	CONFIG_SOFT_I2C			/* I2C bit-banged */
-#define CFG_I2C_SPEED		400000	/* I2C speed and slave address */
-#define CFG_I2C_SLAVE		0x7F
-#define CFG_I2C_NOPROBES	{0x69}	/* Don't probe these addrs */
-#define CFG_I2C_OFFSET		0x3000
+#define CONFIG_SYS_I2C_SPEED		400000	/* I2C speed and slave address */
+#define CONFIG_SYS_I2C_SLAVE		0x7F
+#define CONFIG_SYS_I2C_NOPROBES	{0x69}	/* Don't probe these addrs */
+#define CONFIG_SYS_I2C_OFFSET		0x3000
 
 /*
  * General PCI
  * Addresses are mapped 1-1.
  */
-#define CFG_PCI1_MEM_BASE	0x80000000
-#define CFG_PCI1_MEM_PHYS	CFG_PCI1_MEM_BASE
-#define CFG_PCI1_MEM_SIZE	0x10000000	/* 256M */
-#define CFG_PCI1_IO_BASE	0x00000000
-#define CFG_PCI1_IO_PHYS	0xe1000000
-#define CFG_PCI1_IO_SIZE	0x00100000	/* 1M */
-
-/* PCI view of System Memory */
-#define CFG_PCI_MEMORY_BUS	0x00000000
-#define CFG_PCI_MEMORY_PHYS	0x00000000
-#define CFG_PCI_MEMORY_SIZE	0x80000000
+#define CONFIG_SYS_PCI1_MEM_BASE	0x80000000
+#define CONFIG_SYS_PCI1_MEM_PHYS	CONFIG_SYS_PCI1_MEM_BASE
+#define CONFIG_SYS_PCI1_MEM_SIZE	0x10000000	/* 256M */
+#define CONFIG_SYS_PCI1_IO_BASE	0x00000000
+#define CONFIG_SYS_PCI1_IO_PHYS	0xe1000000
+#define CONFIG_SYS_PCI1_IO_SIZE	0x00100000	/* 1M */
 
 /* For RTL8139 */
 #define KSEG1ADDR(x)	({u32 _x = le32_to_cpu(*(u32 *)(x)); (&_x); })
 #define _IO_BASE		0x00000000
 
 /* controller 1, Base address 0xa000 */
-#define CFG_PCIE1_MEM_BASE	0xa0000000
-#define CFG_PCIE1_MEM_PHYS	CFG_PCIE1_MEM_BASE
-#define CFG_PCIE1_MEM_SIZE	0x10000000	/* 256M */
-#define CFG_PCIE1_IO_BASE	0x00000000
-#define CFG_PCIE1_IO_PHYS	0xe3000000
-#define CFG_PCIE1_IO_SIZE	0x00100000	/* 1M */
+#define CONFIG_SYS_PCIE1_MEM_BASE	0xa0000000
+#define CONFIG_SYS_PCIE1_MEM_PHYS	CONFIG_SYS_PCIE1_MEM_BASE
+#define CONFIG_SYS_PCIE1_MEM_SIZE	0x10000000	/* 256M */
+#define CONFIG_SYS_PCIE1_IO_BASE	0x00000000
+#define CONFIG_SYS_PCIE1_IO_PHYS	0xe3000000
+#define CONFIG_SYS_PCIE1_IO_SIZE	0x00100000	/* 1M */
 
 /* controller 2, Base Address 0x9000 */
-#define CFG_PCIE2_MEM_BASE	0x90000000
-#define CFG_PCIE2_MEM_PHYS	CFG_PCIE2_MEM_BASE
-#define CFG_PCIE2_MEM_SIZE	0x10000000	/* 256M */
-#define CFG_PCIE2_IO_BASE	0x00000000	/* reuse mem LAW */
-#define CFG_PCIE2_IO_PHYS	0xe2000000
-#define CFG_PCIE2_IO_SIZE	0x00100000	/* 1M */
+#define CONFIG_SYS_PCIE2_MEM_BASE	0x90000000
+#define CONFIG_SYS_PCIE2_MEM_PHYS	CONFIG_SYS_PCIE2_MEM_BASE
+#define CONFIG_SYS_PCIE2_MEM_SIZE	0x10000000	/* 256M */
+#define CONFIG_SYS_PCIE2_IO_BASE	0x00000000	/* reuse mem LAW */
+#define CONFIG_SYS_PCIE2_IO_PHYS	0xe2000000
+#define CONFIG_SYS_PCIE2_IO_SIZE	0x00100000	/* 1M */
 
 
 #if defined(CONFIG_PCI)
@@ -324,11 +321,11 @@
 #define CONFIG_PCI_OHCI		1
 #define CONFIG_USB_OHCI_NEW		1
 #define CONFIG_USB_KEYBOARD	1
-#define CFG_DEVICE_DEREGISTER
-#define CFG_USB_EVENT_POLL	1
-#define CFG_USB_OHCI_SLOT_NAME	"ohci_pci"
-#define CFG_USB_OHCI_MAX_ROOT_PORTS 15
-#define CFG_OHCI_SWAP_REG_ACCESS	1
+#define CONFIG_SYS_DEVICE_DEREGISTER
+#define CONFIG_SYS_USB_EVENT_POLL	1
+#define CONFIG_SYS_USB_OHCI_SLOT_NAME	"ohci_pci"
+#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 15
+#define CONFIG_SYS_OHCI_SWAP_REG_ACCESS	1
 
 #if !defined(CONFIG_PCI_PNP)
 #define PCI_ENET0_IOADDR	0xe0000000
@@ -341,10 +338,10 @@
 
 #ifdef CONFIG_SCSI_AHCI
 #define CONFIG_SATA_ULI5288
-#define CFG_SCSI_MAX_SCSI_ID	4
-#define CFG_SCSI_MAX_LUN	1
-#define CFG_SCSI_MAX_DEVICE	(CFG_SCSI_MAX_SCSI_ID * CFG_SCSI_MAX_LUN)
-#define CFG_SCSI_MAXDEVICE	CFG_SCSI_MAX_DEVICE
+#define CONFIG_SYS_SCSI_MAX_SCSI_ID	4
+#define CONFIG_SYS_SCSI_MAX_LUN	1
+#define CONFIG_SYS_SCSI_MAX_DEVICE	(CONFIG_SYS_SCSI_MAX_SCSI_ID * CONFIG_SYS_SCSI_MAX_LUN)
+#define CONFIG_SYS_SCSI_MAXDEVICE	CONFIG_SYS_SCSI_MAX_DEVICE
 #endif
 
 #endif	/* CONFIG_PCI */
@@ -353,10 +350,10 @@
  * BAT0		2G	Cacheable, non-guarded
  * 0x0000_0000	2G	DDR
  */
-#define CFG_DBAT0L	(BATL_PP_RW | BATL_MEMCOHERENCE)
-#define CFG_DBAT0U	(BATU_BL_2G | BATU_VS | BATU_VP)
-#define CFG_IBAT0L	(BATL_PP_RW | BATL_MEMCOHERENCE )
-#define CFG_IBAT0U	CFG_DBAT0U
+#define CONFIG_SYS_DBAT0L	(BATL_PP_RW | BATL_MEMCOHERENCE)
+#define CONFIG_SYS_DBAT0U	(BATU_BL_2G | BATU_VS | BATU_VP)
+#define CONFIG_SYS_IBAT0L	(BATL_PP_RW | BATL_MEMCOHERENCE )
+#define CONFIG_SYS_IBAT0U	CONFIG_SYS_DBAT0U
 
 /*
  * BAT1		1G	Cache-inhibited, guarded
@@ -365,91 +362,112 @@
  * 0x9000_0000	256M	PCI-Express 2 Memory
  */
 
-#define CFG_DBAT1L	(CFG_PCI1_MEM_PHYS | BATL_PP_RW | BATL_CACHEINHIBIT \
+#define CONFIG_SYS_DBAT1L	(CONFIG_SYS_PCI1_MEM_PHYS | BATL_PP_RW | BATL_CACHEINHIBIT \
 			| BATL_GUARDEDSTORAGE)
-#define CFG_DBAT1U	(CFG_PCI1_MEM_PHYS | BATU_BL_1G | BATU_VS | BATU_VP)
-#define CFG_IBAT1L	(CFG_PCI1_MEM_PHYS | BATL_PP_RW | BATL_CACHEINHIBIT)
-#define CFG_IBAT1U	CFG_DBAT1U
+#define CONFIG_SYS_DBAT1U	(CONFIG_SYS_PCI1_MEM_PHYS | BATU_BL_1G | BATU_VS | BATU_VP)
+#define CONFIG_SYS_IBAT1L	(CONFIG_SYS_PCI1_MEM_PHYS | BATL_PP_RW | BATL_CACHEINHIBIT)
+#define CONFIG_SYS_IBAT1U	CONFIG_SYS_DBAT1U
 
 /*
  * BAT2		16M	Cache-inhibited, guarded
  * 0xe100_0000	1M	PCI-1 I/O
  */
 
-#define CFG_DBAT2L	(CFG_PCI1_IO_PHYS | BATL_PP_RW | BATL_CACHEINHIBIT \
+#define CONFIG_SYS_DBAT2L	(CONFIG_SYS_PCI1_IO_PHYS | BATL_PP_RW | BATL_CACHEINHIBIT \
 			| BATL_GUARDEDSTORAGE)
-#define CFG_DBAT2U	(CFG_PCI1_IO_PHYS | BATU_BL_16M | BATU_VS | BATU_VP)
-#define CFG_IBAT2L	(CFG_PCI1_IO_PHYS | BATL_PP_RW | BATL_CACHEINHIBIT)
-#define CFG_IBAT2U	CFG_DBAT2U
+#define CONFIG_SYS_DBAT2U	(CONFIG_SYS_PCI1_IO_PHYS | BATU_BL_16M | BATU_VS | BATU_VP)
+#define CONFIG_SYS_IBAT2L	(CONFIG_SYS_PCI1_IO_PHYS | BATL_PP_RW | BATL_CACHEINHIBIT)
+#define CONFIG_SYS_IBAT2U	CONFIG_SYS_DBAT2U
 
 /*
- * BAT3		32M	Cache-inhibited, guarded
- * 0xe200_0000	1M	PCI-Express 2 I/O
- * 0xe300_0000	1M	PCI-Express 1 I/O
+ * BAT3		4M	Cache-inhibited, guarded
+ * 0xe000_0000	4M	CCSR
  */
 
-#define CFG_DBAT3L	(CFG_PCIE2_IO_PHYS | BATL_PP_RW | BATL_CACHEINHIBIT \
+#define CONFIG_SYS_DBAT3L	(CONFIG_SYS_CCSRBAR | BATL_PP_RW | BATL_CACHEINHIBIT \
 			| BATL_GUARDEDSTORAGE)
-#define CFG_DBAT3U	(CFG_PCIE2_IO_PHYS | BATU_BL_32M | BATU_VS | BATU_VP)
-#define CFG_IBAT3L	(CFG_PCIE2_IO_PHYS | BATL_PP_RW | BATL_CACHEINHIBIT)
-#define CFG_IBAT3U	CFG_DBAT3U
+#define CONFIG_SYS_DBAT3U	(CONFIG_SYS_CCSRBAR | BATU_BL_1M | BATU_VS | BATU_VP)
+#define CONFIG_SYS_IBAT3L	(CONFIG_SYS_CCSRBAR | BATL_PP_RW | BATL_CACHEINHIBIT)
+#define CONFIG_SYS_IBAT3U	CONFIG_SYS_DBAT3U
+
+#if (CONFIG_SYS_CCSRBAR_DEFAULT != CONFIG_SYS_CCSRBAR)
+#define CONFIG_SYS_CCSR_DEFAULT_DBATL (CONFIG_SYS_CCSRBAR_DEFAULT \
+				       | BATL_PP_RW | BATL_CACHEINHIBIT \
+				       | BATL_GUARDEDSTORAGE)
+#define CONFIG_SYS_CCSR_DEFAULT_DBATU (CONFIG_SYS_CCSRBAR_DEFAULT \
+				       | BATU_BL_1M | BATU_VS | BATU_VP)
+#define CONFIG_SYS_CCSR_DEFAULT_IBATL (CONFIG_SYS_CCSRBAR_DEFAULT \
+				       | BATL_PP_RW | BATL_CACHEINHIBIT)
+#define CONFIG_SYS_CCSR_DEFAULT_IBATU CONFIG_SYS_CCSR_DEFAULT_DBATU
+#endif
 
 /*
- * BAT4		4M	Cache-inhibited, guarded
- * 0xe000_0000	4M	CCSR
+ * BAT4		32M	Cache-inhibited, guarded
+ * 0xe200_0000	1M	PCI-Express 2 I/O
+ * 0xe300_0000	1M	PCI-Express 1 I/O
  */
-#define CFG_DBAT4L	(CFG_CCSRBAR | BATL_PP_RW | BATL_CACHEINHIBIT \
+
+#define CONFIG_SYS_DBAT4L	(CONFIG_SYS_PCIE2_IO_PHYS | BATL_PP_RW | BATL_CACHEINHIBIT \
 			| BATL_GUARDEDSTORAGE)
-#define CFG_DBAT4U	(CFG_CCSRBAR | BATU_BL_1M | BATU_VS | BATU_VP)
-#define CFG_IBAT4L	(CFG_CCSRBAR | BATL_PP_RW | BATL_CACHEINHIBIT)
-#define CFG_IBAT4U	CFG_DBAT4U
+#define CONFIG_SYS_DBAT4U	(CONFIG_SYS_PCIE2_IO_PHYS | BATU_BL_32M | BATU_VS | BATU_VP)
+#define CONFIG_SYS_IBAT4L	(CONFIG_SYS_PCIE2_IO_PHYS | BATL_PP_RW | BATL_CACHEINHIBIT)
+#define CONFIG_SYS_IBAT4U	CONFIG_SYS_DBAT4U
+
 
 /*
  * BAT5		128K	Cacheable, non-guarded
  * 0xe400_0000	128K	Init RAM for stack in the CPU DCache (no backing memory)
  */
-#define CFG_DBAT5L	(CFG_INIT_RAM_ADDR | BATL_PP_RW | BATL_MEMCOHERENCE)
-#define CFG_DBAT5U	(CFG_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP)
-#define CFG_IBAT5L	CFG_DBAT5L
-#define CFG_IBAT5U	CFG_DBAT5U
+#define CONFIG_SYS_DBAT5L	(CONFIG_SYS_INIT_RAM_ADDR | BATL_PP_RW | BATL_MEMCOHERENCE)
+#define CONFIG_SYS_DBAT5U	(CONFIG_SYS_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP)
+#define CONFIG_SYS_IBAT5L	CONFIG_SYS_DBAT5L
+#define CONFIG_SYS_IBAT5U	CONFIG_SYS_DBAT5U
 
 /*
  * BAT6		256M	Cache-inhibited, guarded
  * 0xf000_0000	256M	FLASH
  */
-#define CFG_DBAT6L	(CFG_FLASH_BASE	 | BATL_PP_RW | BATL_CACHEINHIBIT \
+#define CONFIG_SYS_DBAT6L	(CONFIG_SYS_FLASH_BASE	 | BATL_PP_RW | BATL_CACHEINHIBIT \
 			| BATL_GUARDEDSTORAGE)
-#define CFG_DBAT6U	(CFG_FLASH_BASE	 | BATU_BL_256M | BATU_VS | BATU_VP)
-#define CFG_IBAT6L	(CFG_FLASH_BASE | BATL_PP_RW | BATL_MEMCOHERENCE)
-#define CFG_IBAT6U	CFG_DBAT6U
+#define CONFIG_SYS_DBAT6U	(CONFIG_SYS_FLASH_BASE	 | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CONFIG_SYS_IBAT6L	(CONFIG_SYS_FLASH_BASE | BATL_PP_RW | BATL_MEMCOHERENCE)
+#define CONFIG_SYS_IBAT6U	CONFIG_SYS_DBAT6U
+
+/* Map the last 1M of flash where we're running from reset */
+#define CONFIG_SYS_DBAT6L_EARLY	(CONFIG_SYS_MONITOR_BASE_EARLY | BATL_PP_RW \
+				 | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
+#define CONFIG_SYS_DBAT6U_EARLY	(TEXT_BASE | BATU_BL_1M | BATU_VS | BATU_VP)
+#define CONFIG_SYS_IBAT6L_EARLY	(CONFIG_SYS_MONITOR_BASE_EARLY | BATL_PP_RW \
+				 | BATL_MEMCOHERENCE)
+#define CONFIG_SYS_IBAT6U_EARLY	CONFIG_SYS_DBAT6U_EARLY
 
 /*
  * BAT7		4M	Cache-inhibited, guarded
  * 0xe800_0000	4M	PIXIS
  */
-#define CFG_DBAT7L	(PIXIS_BASE | BATL_PP_RW | BATL_CACHEINHIBIT \
+#define CONFIG_SYS_DBAT7L	(PIXIS_BASE | BATL_PP_RW | BATL_CACHEINHIBIT \
 			| BATL_GUARDEDSTORAGE)
-#define CFG_DBAT7U	(PIXIS_BASE | BATU_BL_1M | BATU_VS | BATU_VP)
-#define CFG_IBAT7L	(PIXIS_BASE | BATL_PP_RW | BATL_CACHEINHIBIT)
-#define CFG_IBAT7U	CFG_DBAT7U
+#define CONFIG_SYS_DBAT7U	(PIXIS_BASE | BATU_BL_1M | BATU_VS | BATU_VP)
+#define CONFIG_SYS_IBAT7L	(PIXIS_BASE | BATL_PP_RW | BATL_CACHEINHIBIT)
+#define CONFIG_SYS_IBAT7U	CONFIG_SYS_DBAT7U
 
 
 /*
  * Environment
  */
-#ifndef CFG_RAMBOOT
-#define CFG_ENV_IS_IN_FLASH	1
-#define CFG_ENV_ADDR		(CFG_MONITOR_BASE + CFG_MONITOR_LEN)
-#define CFG_ENV_SECT_SIZE	0x20000	/* 126k (one sector) for env */
-#define CFG_ENV_SIZE		0x2000
+#ifndef CONFIG_SYS_RAMBOOT
+#define CONFIG_ENV_IS_IN_FLASH	1
+#define CONFIG_ENV_ADDR		(CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)
+#define CONFIG_ENV_SECT_SIZE	0x20000	/* 126k (one sector) for env */
+#define CONFIG_ENV_SIZE		0x2000
 #else
-#define CFG_ENV_IS_NOWHERE	1	/* Store ENV in memory only */
-#define CFG_ENV_ADDR		(CFG_MONITOR_BASE - 0x1000)
-#define CFG_ENV_SIZE		0x2000
+#define CONFIG_ENV_IS_NOWHERE	1	/* Store ENV in memory only */
+#define CONFIG_ENV_ADDR		(CONFIG_SYS_MONITOR_BASE - 0x1000)
+#define CONFIG_ENV_SIZE		0x2000
 #endif
 
 #define CONFIG_LOADS_ECHO	1	/* echo on for serial download */
-#define CFG_LOADS_BAUD_CHANGE	1	/* allow baudrate change */
+#define CONFIG_SYS_LOADS_BAUD_CHANGE	1	/* allow baudrate change */
 
 
 /*
@@ -470,7 +488,7 @@
 #define CONFIG_CMD_I2C
 #define CONFIG_CMD_MII
 
-#if defined(CFG_RAMBOOT)
+#if defined(CONFIG_SYS_RAMBOOT)
 #undef CONFIG_CMD_ENV
 #endif
 
@@ -483,7 +501,7 @@
 
 
 #define CONFIG_WATCHDOG			/* watchdog enabled */
-#define CFG_WATCHDOG_FREQ	5000	/* Feed interval, 5s */
+#define CONFIG_SYS_WATCHDOG_FREQ	5000	/* Feed interval, 5s */
 
 /*DIU Configuration*/
 #define DIU_CONNECT_TO_DVI		/* DIU controller connects to DVI encoder*/
@@ -491,28 +509,28 @@
 /*
  * Miscellaneous configurable options
  */
-#define CFG_LONGHELP			/* undef to save memory	*/
+#define CONFIG_SYS_LONGHELP			/* undef to save memory	*/
 #define CONFIG_CMDLINE_EDITING          /* Command-line editing */
-#define CFG_LOAD_ADDR	0x2000000	/* default load address */
-#define CFG_PROMPT	"=> "		/* Monitor Command Prompt */
+#define CONFIG_SYS_LOAD_ADDR	0x2000000	/* default load address */
+#define CONFIG_SYS_PROMPT	"=> "		/* Monitor Command Prompt */
 
 #if defined(CONFIG_CMD_KGDB)
-#define CFG_CBSIZE	1024		/* Console I/O Buffer Size */
+#define CONFIG_SYS_CBSIZE	1024		/* Console I/O Buffer Size */
 #else
-#define CFG_CBSIZE	256		/* Console I/O Buffer Size */
+#define CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size */
 #endif
 
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define CFG_MAXARGS	16		/* max number of command args */
-#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size */
-#define CFG_HZ		1000		/* decrementer freq: 1ms ticks */
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS	16		/* max number of command args */
+#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size */
+#define CONFIG_SYS_HZ		1000		/* decrementer freq: 1ms ticks */
 
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define CFG_BOOTMAPSZ	(8 << 20)	/* Initial Memory map for Linux*/
+#define CONFIG_SYS_BOOTMAPSZ	(8 << 20)	/* Initial Memory map for Linux*/
 
 /*
  * Internal Definitions
diff --git a/include/configs/MPC8641HPCN.h b/include/configs/MPC8641HPCN.h
index 54a046107..5a832961c 100644
--- a/include/configs/MPC8641HPCN.h
+++ b/include/configs/MPC8641HPCN.h
@@ -38,17 +38,32 @@
 #define CONFIG_MPC8641HPCN	1	/* MPC8641HPCN board specific */
 #define CONFIG_NUM_CPUS		2	/* Number of CPUs in the system */
 #define CONFIG_LINUX_RESET_VEC	0x100	/* Reset vector used by Linux */
+/*#define CONFIG_PHYS_64BIT	1*/	/* Place devices in 36-bit space */
 
 #ifdef RUN_DIAG
-#define CFG_DIAG_ADDR	     0xff800000
+#define CONFIG_SYS_DIAG_ADDR	     CONFIG_SYS_FLASH_BASE
 #endif
 
-#define CFG_RESET_ADDRESS    0xfff00100
+#define CONFIG_SYS_RESET_ADDRESS    0xfff00100
 
+/*
+ * virtual address to be used for temporary mappings.  There
+ * should be 128k free at this VA.
+ */
+#define CONFIG_SYS_SCRATCH_VA	0xe0000000
+
+/*
+ * set this to enable Rapid IO.  PCI and RIO are mutually exclusive
+ */
+/*#define CONFIG_RIO		1*/
+
+#ifndef CONFIG_RIO			/* RIO/PCI are mutually exclusive */
 #define CONFIG_PCI		1	/* Enable PCI/PCIE */
 #define CONFIG_PCI1		1	/* PCIE controler 1 (ULI bridge) */
 #define CONFIG_PCI2		1	/* PCIE controler 2 (slot) */
 #define CONFIG_FSL_PCI_INIT	1	/* Use common FSL init code */
+#define CONFIG_SYS_PCI_64BIT	1	/* enable 64-bit PCI resources */
+#endif
 #define CONFIG_FSL_LAW		1	/* Use common FSL law init code */
 
 #define CONFIG_TSEC_ENET		/* tsec ethernet support */
@@ -61,7 +76,7 @@
 /*
  * L2CR setup -- make sure this is right for your board!
  */
-#define CFG_L2
+#define CONFIG_SYS_L2
 #define L2_INIT		0
 #define L2_ENABLE	(L2CR_L2E)
 
@@ -74,19 +89,41 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 
 #define CONFIG_BOARD_EARLY_INIT_F	1	/* Call board_pre_init */
 
-#define CFG_MEMTEST_START	0x00200000	/* memtest region */
-#define CFG_MEMTEST_END		0x00400000
+#define CONFIG_SYS_MEMTEST_START	0x00200000	/* memtest region */
+#define CONFIG_SYS_MEMTEST_END		0x00400000
+
+/*
+ * With the exception of PCI Memory and Rapid IO, most devices will simply
+ * add CONFIG_SYS_PHYS_ADDR_HIGH to the front of the 32-bit VA to get the PA
+ * when 36-bit is enabled.  When 36-bit is not enabled, these bits are 0.
+ */
+#ifdef CONFIG_PHYS_64BIT
+#define CONFIG_SYS_PHYS_ADDR_HIGH 0x0000000f00000000ULL
+#else
+#define CONFIG_SYS_PHYS_ADDR_HIGH 0x0
+#endif
 
 /*
  * Base addresses -- Note these are effective addresses where the
  * actual resources get mapped (not physical addresses)
  */
-#define CFG_CCSRBAR_DEFAULT	0xff700000	/* CCSRBAR Default */
-#define CFG_CCSRBAR		0xf8000000	/* relocated CCSRBAR */
-#define CFG_IMMR		CFG_CCSRBAR	/* PQII uses CFG_IMMR */
+#define CONFIG_SYS_CCSRBAR_DEFAULT	0xff700000	/* CCSRBAR Default */
+#define CONFIG_SYS_CCSRBAR		0xffe00000	/* relocated CCSRBAR */
+#define CONFIG_SYS_IMMR		CONFIG_SYS_CCSRBAR	/* PQII uses CONFIG_SYS_IMMR */
+
+/* Physical addresses */
+#define CONFIG_SYS_CCSRBAR_PHYS_LOW	CONFIG_SYS_CCSRBAR
+#ifdef CONFIG_PHYS_64BIT
+#define CONFIG_SYS_CCSRBAR_PHYS_HIGH	0xf
+#define CONFIG_SYS_CCSRBAR_PHYS		(CONFIG_SYS_CCSRBAR_PHYS_LOW \
+					 | ((u64)CONFIG_SYS_CCSRBAR_PHYS_HIGH << 32))
+#else
+#define CONFIG_SYS_CCSRBAR_PHYS_HIGH	0x0
+#define CONFIG_SYS_CCSRBAR_PHYS		CONFIG_SYS_CCSRBAR_PHYS_LOW
+#endif
 
-#define CFG_PCI1_ADDR		(CFG_CCSRBAR+0x8000)
-#define CFG_PCI2_ADDR		(CFG_CCSRBAR+0x9000)
+#define CONFIG_SYS_PCI1_ADDR		(CONFIG_SYS_CCSRBAR+0x8000)
+#define CONFIG_SYS_PCI2_ADDR		(CONFIG_SYS_CCSRBAR+0x9000)
 
 /*
  * DDR Setup
@@ -99,8 +136,9 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER	/* DDR controller or DMA? */
 #define CONFIG_MEM_INIT_VALUE	0xDeadBeef
 
-#define CFG_DDR_SDRAM_BASE	0x00000000	/* DDR is system memory*/
-#define CFG_SDRAM_BASE		CFG_DDR_SDRAM_BASE
+#define CONFIG_SYS_DDR_SDRAM_BASE	0x00000000	/* DDR is system memory*/
+#define CONFIG_SYS_SDRAM_BASE		CONFIG_SYS_DDR_SDRAM_BASE
+#define CONFIG_SYS_MAX_DDR_BAT_SIZE	0x80000000	/* BAT mapping size */
 #define CONFIG_VERY_BIG_RAM
 
 #define MPC86xx_DDR_SDRAM_CLK_CNTL
@@ -121,72 +159,60 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 /*
  * These are used when DDR doesn't use SPD.
  */
-#define CFG_SDRAM_SIZE		256		/* DDR is 256MB */
-#define CFG_DDR_CS0_BNDS	0x0000000F
-#define CFG_DDR_CS0_CONFIG	0x80010102      /* Enable, no interleaving */
-#define CFG_DDR_TIMING_3	0x00000000
-#define CFG_DDR_TIMING_0	0x00260802
-#define CFG_DDR_TIMING_1	0x39357322
-#define CFG_DDR_TIMING_2	0x14904cc8
-#define CFG_DDR_MODE_1		0x00480432
-#define CFG_DDR_MODE_2		0x00000000
-#define CFG_DDR_INTERVAL	0x06090100
-#define CFG_DDR_DATA_INIT	0xdeadbeef
-#define CFG_DDR_CLK_CTRL	0x03800000
-#define CFG_DDR_OCD_CTRL	0x00000000
-#define CFG_DDR_OCD_STATUS	0x00000000
-#define CFG_DDR_CONTROL		0xe3008000	/* Type = DDR2 */
-#define CFG_DDR_CONTROL2	0x04400000
-
-/*
- * FIXME: Not used in fixed_sdram function
- */
-#define CFG_DDR_MODE		0x00000022
-#define CFG_DDR_CS1_BNDS	0x00000000
-#define CFG_DDR_CS2_BNDS	0x00000FFF	/* Not done */
-#define CFG_DDR_CS3_BNDS	0x00000FFF	/* Not done */
-#define CFG_DDR_CS4_BNDS	0x00000FFF	/* Not done */
-#define CFG_DDR_CS5_BNDS	0x00000FFF	/* Not done */
-
+#define CONFIG_SYS_SDRAM_SIZE		256		/* DDR is 256MB */
+#define CONFIG_SYS_DDR_CS0_BNDS	0x0000000F
+#define CONFIG_SYS_DDR_CS0_CONFIG	0x80010102      /* Enable, no interleaving */
+#define CONFIG_SYS_DDR_TIMING_3	0x00000000
+#define CONFIG_SYS_DDR_TIMING_0	0x00260802
+#define CONFIG_SYS_DDR_TIMING_1	0x39357322
+#define CONFIG_SYS_DDR_TIMING_2	0x14904cc8
+#define CONFIG_SYS_DDR_MODE_1		0x00480432
+#define CONFIG_SYS_DDR_MODE_2		0x00000000
+#define CONFIG_SYS_DDR_INTERVAL	0x06090100
+#define CONFIG_SYS_DDR_DATA_INIT	0xdeadbeef
+#define CONFIG_SYS_DDR_CLK_CTRL	0x03800000
+#define CONFIG_SYS_DDR_OCD_CTRL	0x00000000
+#define CONFIG_SYS_DDR_OCD_STATUS	0x00000000
+#define CONFIG_SYS_DDR_CONTROL		0xe3008000	/* Type = DDR2 */
+#define CONFIG_SYS_DDR_CONTROL2	0x04400000
 
 #define CONFIG_ID_EEPROM
-#define CFG_I2C_EEPROM_NXID
-#define CFG_ID_EEPROM
-#define CFG_I2C_EEPROM_ADDR     0x57
-#define CFG_I2C_EEPROM_ADDR_LEN 1
-
-/*
- * In MPC8641HPCN, allocate 16MB flash spaces at fe000000 and ff000000.
- * There is an 8MB flash.  In effect, the addresses from fe000000 to fe7fffff
- * map to fe800000 to ffffffff, and ff000000 to ff7fffff map to ffffffff.
- * However, when u-boot comes up, the flash_init needs hard start addresses
- * to build its info table.  For user convenience, the flash addresses is
- * fe800000 and ff800000.  That way, u-boot knows where the flash is
- * and the user can download u-boot code from promjet to fef00000, a
- * more intuitive location than fe700000.
- *
- * Note that, on switching the boot location, fef00000 becomes fff00000.
- */
-#define CFG_FLASH_BASE		0xfe800000     /* start of FLASH 32M */
-#define CFG_FLASH_BASE2		0xff800000
+#define CONFIG_SYS_I2C_EEPROM_NXID
+#define CONFIG_ID_EEPROM
+#define CONFIG_SYS_I2C_EEPROM_ADDR     0x57
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
 
-#define CFG_FLASH_BANKS_LIST {CFG_FLASH_BASE, CFG_FLASH_BASE2}
+#define CONFIG_SYS_FLASH_BASE		0xef800000     /* start of FLASH 8M */
+#define CONFIG_SYS_FLASH_BASE_PHYS	(CONFIG_SYS_FLASH_BASE \
+					 | CONFIG_SYS_PHYS_ADDR_HIGH)
 
-#define CFG_BR0_PRELIM		0xff001001	/* port size 16bit */
-#define CFG_OR0_PRELIM		0xff006ff7	/* 16MB Boot Flash area*/
+#define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE}
 
-#define CFG_BR1_PRELIM		0xfe001001	/* port size 16bit */
-#define CFG_OR1_PRELIM		0xff006ff7	/* 16MB Alternate Boot Flash area*/
+#define CONFIG_SYS_BR0_PRELIM	(BR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) \
+				 | 0x00001001)	/* port size 16bit */
+#define CONFIG_SYS_OR0_PRELIM	0xff806ff7	/* 8MB Boot Flash area*/
 
-#define CFG_BR2_PRELIM		0xf8201001	/* port size 16bit */
-#define CFG_OR2_PRELIM		0xfff06ff7	/* 1MB Compact Flash area*/
+#define CONFIG_SYS_BR2_PRELIM	(BR_PHYS_ADDR(CF_BASE_PHYS)		\
+				 | 0x00001001)	/* port size 16bit */
+#define CONFIG_SYS_OR2_PRELIM	0xffffeff7	/* 32k Compact Flash */
 
-#define CFG_BR3_PRELIM		0xf8100801	/* port size 8bit */
-#define CFG_OR3_PRELIM		0xfff06ff7	/* 1MB PIXIS area*/
+#define CONFIG_SYS_BR3_PRELIM	(BR_PHYS_ADDR(PIXIS_BASE_PHYS)	\
+				 | 0x00000801) /* port size 8bit */
+#define CONFIG_SYS_OR3_PRELIM	0xffffeff7	/* 32k PIXIS area*/
 
+/*
+ * The LBC_BASE is the base of the region that contains the PIXIS and the CF.
+ * The PIXIS and CF by themselves aren't large enough to take up the 128k
+ * required for the smallest BAT mapping, so there's a 64k hole.
+ */
+#define CONFIG_SYS_LBC_BASE		0xffde0000
+#define CONFIG_SYS_LBC_BASE_PHYS	(CONFIG_SYS_LBC_BASE \
+					 | CONFIG_SYS_PHYS_ADDR_HIGH)
 
 #define CONFIG_FSL_PIXIS	1	/* use common PIXIS code */
-#define PIXIS_BASE	0xf8100000	/* PIXIS registers */
+#define PIXIS_BASE		(CONFIG_SYS_LBC_BASE + 0x00010000)
+#define PIXIS_BASE_PHYS 	(CONFIG_SYS_LBC_BASE_PHYS + 0x00010000)
+#define PIXIS_SIZE		0x00008000	/* 32k */
 #define PIXIS_ID		0x0	/* Board ID at offset 0 */
 #define PIXIS_VER		0x1	/* Board version at offset 1 */
 #define PIXIS_PVER		0x2	/* PIXIS FPGA version at offset 2 */
@@ -201,67 +227,71 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 #define PIXIS_VSPEED1		0x18	/* VELA VSpeed 1 */
 #define PIXIS_VCLKH		0x19	/* VELA VCLKH register */
 #define PIXIS_VCLKL		0x1A	/* VELA VCLKL register */
-#define CFG_PIXIS_VBOOT_MASK	0x40	/* Reset altbank mask*/
+#define CONFIG_SYS_PIXIS_VBOOT_MASK	0x40	/* Reset altbank mask*/
 
-#define CFG_MAX_FLASH_BANKS	2		/* number of banks */
-#define CFG_MAX_FLASH_SECT	128		/* sectors per device */
+/* Compact flash shares a BAT with PIXIS; make sure they're contiguous */
+#define CF_BASE			(PIXIS_BASE + PIXIS_SIZE)
+#define CF_BASE_PHYS		(PIXIS_BASE_PHYS + PIXIS_SIZE)
 
-#undef	CFG_FLASH_CHECKSUM
-#define CFG_FLASH_ERASE_TOUT	60000	/* Flash Erase Timeout (ms) */
-#define CFG_FLASH_WRITE_TOUT	500	/* Flash Write Timeout (ms) */
-#define CFG_MONITOR_BASE	TEXT_BASE	/* start of monitor */
+#define CONFIG_SYS_MAX_FLASH_BANKS	1		/* number of banks */
+#define CONFIG_SYS_MAX_FLASH_SECT	128		/* sectors per device */
+
+#undef	CONFIG_SYS_FLASH_CHECKSUM
+#define CONFIG_SYS_FLASH_ERASE_TOUT	60000	/* Flash Erase Timeout (ms) */
+#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Flash Write Timeout (ms) */
+#define CONFIG_SYS_MONITOR_BASE		TEXT_BASE	/* start of monitor */
+#define CONFIG_SYS_MONITOR_BASE_EARLY   0xfff00000	/* early monitor loc */
 
 #define CONFIG_FLASH_CFI_DRIVER
-#define CFG_FLASH_CFI
-#define CFG_FLASH_EMPTY_INFO
+#define CONFIG_SYS_FLASH_CFI
+#define CONFIG_SYS_FLASH_EMPTY_INFO
 
-#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
-#define CFG_RAMBOOT
+#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
+#define CONFIG_SYS_RAMBOOT
 #else
-#undef	CFG_RAMBOOT
+#undef	CONFIG_SYS_RAMBOOT
 #endif
 
-#if defined(CFG_RAMBOOT)
+#if defined(CONFIG_SYS_RAMBOOT)
 #undef CONFIG_SPD_EEPROM
-#define CFG_SDRAM_SIZE	256
+#define CONFIG_SYS_SDRAM_SIZE	256
 #endif
 
 #undef CONFIG_CLOCKS_IN_MHZ
 
-#define CONFIG_L1_INIT_RAM
-#define CFG_INIT_RAM_LOCK	1
-#ifndef CFG_INIT_RAM_LOCK
-#define CFG_INIT_RAM_ADDR	0x0fd00000	/* Initial RAM address */
+#define CONFIG_SYS_INIT_RAM_LOCK	1
+#ifndef CONFIG_SYS_INIT_RAM_LOCK
+#define CONFIG_SYS_INIT_RAM_ADDR	0x0fd00000	/* Initial RAM address */
 #else
-#define CFG_INIT_RAM_ADDR	0xf8400000	/* Initial RAM address */
+#define CONFIG_SYS_INIT_RAM_ADDR	0xf8400000	/* Initial RAM address */
 #endif
-#define CFG_INIT_RAM_END	0x4000		/* End of used area in RAM */
+#define CONFIG_SYS_INIT_RAM_END	0x4000		/* End of used area in RAM */
 
-#define CFG_GBL_DATA_SIZE	128		/* num bytes initial data */
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_GBL_DATA_SIZE	128		/* num bytes initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
-#define CFG_MONITOR_LEN		(256 * 1024)	/* Reserve 256 kB for Mon */
-#define CFG_MALLOC_LEN		(1024 * 1024)	 /* Reserved for malloc */
+#define CONFIG_SYS_MONITOR_LEN		(256 * 1024)	/* Reserve 256 kB for Mon */
+#define CONFIG_SYS_MALLOC_LEN		(1024 * 1024)	 /* Reserved for malloc */
 
 /* Serial Port */
 #define CONFIG_CONS_INDEX     1
 #undef	CONFIG_SERIAL_SOFTWARE_FIFO
-#define CFG_NS16550
-#define CFG_NS16550_SERIAL
-#define CFG_NS16550_REG_SIZE	1
-#define CFG_NS16550_CLK		get_bus_freq(0)
+#define CONFIG_SYS_NS16550
+#define CONFIG_SYS_NS16550_SERIAL
+#define CONFIG_SYS_NS16550_REG_SIZE	1
+#define CONFIG_SYS_NS16550_CLK		get_bus_freq(0)
 
-#define CFG_BAUDRATE_TABLE  \
+#define CONFIG_SYS_BAUDRATE_TABLE  \
 	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200}
 
-#define CFG_NS16550_COM1	(CFG_CCSRBAR+0x4500)
-#define CFG_NS16550_COM2	(CFG_CCSRBAR+0x4600)
+#define CONFIG_SYS_NS16550_COM1	(CONFIG_SYS_CCSRBAR+0x4500)
+#define CONFIG_SYS_NS16550_COM2	(CONFIG_SYS_CCSRBAR+0x4600)
 
 /* Use the HUSH parser */
-#define CFG_HUSH_PARSER
-#ifdef	CFG_HUSH_PARSER
-#define CFG_PROMPT_HUSH_PS2 "> "
+#define CONFIG_SYS_HUSH_PARSER
+#ifdef	CONFIG_SYS_HUSH_PARSER
+#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
 #endif
 
 /*
@@ -272,8 +302,8 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 #define CONFIG_OF_STDOUT_VIA_ALIAS	1
 
 
-#define CFG_64BIT_VSPRINTF	1
-#define CFG_64BIT_STRTOUL	1
+#define CONFIG_SYS_64BIT_VSPRINTF	1
+#define CONFIG_SYS_64BIT_STRTOUL	1
 
 /*
  * I2C
@@ -281,50 +311,60 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 #define CONFIG_FSL_I2C		/* Use FSL common I2C driver */
 #define CONFIG_HARD_I2C		/* I2C with hardware support*/
 #undef	CONFIG_SOFT_I2C			/* I2C bit-banged */
-#define CFG_I2C_SPEED		400000	/* I2C speed and slave address */
-#define CFG_I2C_SLAVE		0x7F
-#define CFG_I2C_NOPROBES	{0x69}	/* Don't probe these addrs */
-#define CFG_I2C_OFFSET		0x3100
+#define CONFIG_SYS_I2C_SPEED		400000	/* I2C speed and slave address */
+#define CONFIG_SYS_I2C_SLAVE		0x7F
+#define CONFIG_SYS_I2C_NOPROBES	{0x69}	/* Don't probe these addrs */
+#define CONFIG_SYS_I2C_OFFSET		0x3100
 
 /*
  * RapidIO MMU
  */
-#define CFG_RIO_MEM_BASE	0xc0000000	/* base address */
-#define CFG_RIO_MEM_PHYS	CFG_RIO_MEM_BASE
-#define CFG_RIO_MEM_SIZE	0x20000000	/* 128M */
+#define CONFIG_SYS_RIO_MEM_BASE	0x80000000	/* base address */
+#ifdef CONFIG_PHYS_64BIT
+#define CONFIG_SYS_RIO_MEM_PHYS  0x0000000c00000000ULL
+#else
+#define CONFIG_SYS_RIO_MEM_PHYS	CONFIG_SYS_RIO_MEM_BASE
+#endif
+#define CONFIG_SYS_RIO_MEM_SIZE	0x20000000	/* 128M */
 
 /*
  * General PCI
  * Addresses are mapped 1-1.
  */
-#define CFG_PCI1_MEM_BASE	0x80000000
-#define CFG_PCI1_MEM_PHYS	CFG_PCI1_MEM_BASE
-#define CFG_PCI1_MEM_SIZE	0x20000000	/* 512M */
-#define CFG_PCI1_IO_BASE	0x00000000
-#define CFG_PCI1_IO_PHYS	0xe2000000
-#define CFG_PCI1_IO_SIZE	0x00100000	/* 1M */
-
-/* PCI view of System Memory */
-#define CFG_PCI_MEMORY_BUS	0x00000000
-#define CFG_PCI_MEMORY_PHYS	0x00000000
-#define CFG_PCI_MEMORY_SIZE	0x80000000
+#define CONFIG_SYS_PCI1_MEM_BASE	0x80000000
+#ifdef CONFIG_PHYS_64BIT
+#define CONFIG_SYS_PCI1_MEM_PHYS	0x0000000c00000000ULL
+#else
+#define CONFIG_SYS_PCI1_MEM_PHYS	CONFIG_SYS_PCI1_MEM_BASE
+#endif
+#define CONFIG_SYS_PCI1_MEM_SIZE	0x20000000	/* 512M */
+#define CONFIG_SYS_PCI1_IO_BASE	0x00000000
+#define CONFIG_SYS_PCI1_IO_VIRT	0xffc00000
+#define CONFIG_SYS_PCI1_IO_PHYS	(CONFIG_SYS_PCI1_IO_VIRT \
+				 | CONFIG_SYS_PHYS_ADDR_HIGH)
+#define CONFIG_SYS_PCI1_IO_SIZE	0x00010000	/* 64K */
 
 /* For RTL8139 */
 #define KSEG1ADDR(x)		({u32 _x=le32_to_cpu(*(u32 *)(x)); (&_x);})
 #define _IO_BASE		0x00000000
 
-#define CFG_PCI2_MEM_BASE	0xa0000000
-#define CFG_PCI2_MEM_PHYS	CFG_PCI2_MEM_BASE
-#define CFG_PCI2_MEM_SIZE	0x20000000	/* 512M */
-#define CFG_PCI2_IO_BASE	0x00000000
-#define CFG_PCI2_IO_PHYS	0xe3000000
-#define CFG_PCI2_IO_SIZE	0x00100000	/* 1M */
+#define CONFIG_SYS_PCI2_MEM_BASE 	(CONFIG_SYS_PCI1_MEM_BASE \
+					 + CONFIG_SYS_PCI1_MEM_SIZE)
+#define CONFIG_SYS_PCI2_MEM_PHYS	(CONFIG_SYS_PCI1_MEM_PHYS \
+					 + CONFIG_SYS_PCI1_MEM_SIZE)
+#define CONFIG_SYS_PCI2_MEM_SIZE	0x20000000	/* 512M */
+#define CONFIG_SYS_PCI2_IO_BASE	0x00000000
+#define CONFIG_SYS_PCI2_IO_VIRT (CONFIG_SYS_PCI1_IO_VIRT \
+				 + CONFIG_SYS_PCI1_IO_SIZE)
+#define CONFIG_SYS_PCI2_IO_PHYS	(CONFIG_SYS_PCI1_IO_PHYS \
+				 + CONFIG_SYS_PCI1_IO_SIZE)
+#define CONFIG_SYS_PCI2_IO_SIZE	CONFIG_SYS_PCI1_IO_SIZE
 
 #if defined(CONFIG_PCI)
 
 #define CONFIG_PCI_SCAN_SHOW		/* show pci devices on startup */
 
-#undef CFG_SCSI_SCAN_BUS_REVERSE
+#undef CONFIG_SYS_SCSI_SCAN_BUS_REVERSE
 
 #define CONFIG_NET_MULTI
 #define CONFIG_PCI_PNP			/* do pci plug-and-play */
@@ -340,23 +380,17 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 #define CONFIG_PCI_OHCI			1
 #define CONFIG_USB_OHCI_NEW		1
 #define CONFIG_USB_KEYBOARD		1
-#define CFG_DEVICE_DEREGISTER
-#define CFG_USB_EVENT_POLL		1
-#define CFG_USB_OHCI_SLOT_NAME		"ohci_pci"
-#define CFG_USB_OHCI_MAX_ROOT_PORTS	15
-#define CFG_OHCI_SWAP_REG_ACCESS	1
-
-#if !defined(CONFIG_PCI_PNP)
-    #define PCI_ENET0_IOADDR	0xe0000000
-    #define PCI_ENET0_MEMADDR	0xe0000000
-    #define PCI_IDSEL_NUMBER	0x0c	/* slot0->3(IDSEL)=12->15 */
-#endif
+#define CONFIG_SYS_DEVICE_DEREGISTER
+#define CONFIG_SYS_USB_EVENT_POLL		1
+#define CONFIG_SYS_USB_OHCI_SLOT_NAME		"ohci_pci"
+#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS	15
+#define CONFIG_SYS_OHCI_SWAP_REG_ACCESS	1
 
 /*PCIE video card used*/
-#define VIDEO_IO_OFFSET		CFG_PCI2_IO_PHYS
+#define VIDEO_IO_OFFSET		CONFIG_SYS_PCI2_IO_VIRT
 
 /*PCI video card used*/
-/*#define VIDEO_IO_OFFSET	CFG_PCI1_IO_PHYS*/
+/*#define VIDEO_IO_OFFSET	CONFIG_SYS_PCI1_IO_VIRT*/
 
 /* video */
 #define CONFIG_VIDEO
@@ -369,7 +403,7 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 #define CONFIG_ATI_RADEON_FB
 #define CONFIG_VIDEO_LOGO
 /*#define CONFIG_CONSOLE_CURSOR*/
-#define CFG_ISA_IO_BASE_ADDRESS CFG_PCI2_IO_PHYS
+#define CONFIG_SYS_ISA_IO_BASE_ADDRESS CONFIG_SYS_PCI2_IO_VIRT
 #endif
 
 #undef CONFIG_PCI_SCAN_SHOW		/* show pci devices on startup */
@@ -379,10 +413,10 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 
 #ifdef CONFIG_SCSI_AHCI
 #define CONFIG_SATA_ULI5288
-#define CFG_SCSI_MAX_SCSI_ID	4
-#define CFG_SCSI_MAX_LUN	1
-#define CFG_SCSI_MAX_DEVICE	(CFG_SCSI_MAX_SCSI_ID * CFG_SCSI_MAX_LUN)
-#define CFG_SCSI_MAXDEVICE	CFG_SCSI_MAX_DEVICE
+#define CONFIG_SYS_SCSI_MAX_SCSI_ID	4
+#define CONFIG_SYS_SCSI_MAX_LUN	1
+#define CONFIG_SYS_SCSI_MAX_DEVICE	(CONFIG_SYS_SCSI_MAX_SCSI_ID * CONFIG_SYS_SCSI_MAX_LUN)
+#define CONFIG_SYS_SCSI_MAXDEVICE	CONFIG_SYS_SCSI_MAX_DEVICE
 #endif
 
 #define CONFIG_MPC86XX_PCI2
@@ -423,99 +457,163 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 
 #endif	/* CONFIG_TSEC_ENET */
 
+/*  Contort an addr into the format needed for BATs */
+#ifdef CONFIG_PHYS_64BIT
+#define BAT_PHYS_ADDR(x)         ((unsigned long) \
+				  ((x & 0x00000000ffffffffULL) |	\
+				   ((x & 0x0000000e00000000ULL) >> 24) | \
+				   ((x & 0x0000000100000000ULL) >> 30)))
+#else
+#define BAT_PHYS_ADDR(x)        (x)
+#endif
+
+
+/* Put high physical address bits into the BAT format */
+#define PHYS_HIGH_TO_BXPN(x) ((x & 0x0000000e) << 8)
+#define PHYS_HIGH_TO_BX(x) ((x & 0x00000001) << 2)
+
 /*
- * BAT0		2G     Cacheable, non-guarded
- * 0x0000_0000	2G     DDR
+ * BAT0		DDR
  */
-#define CFG_DBAT0L	(BATL_PP_RW | BATL_MEMCOHERENCE)
-#define CFG_DBAT0U	(BATU_BL_2G | BATU_VS | BATU_VP)
-#define CFG_IBAT0L	(BATL_PP_RW | BATL_MEMCOHERENCE )
-#define CFG_IBAT0U	CFG_DBAT0U
+#define CONFIG_SYS_DBAT0L	(BATL_PP_RW | BATL_MEMCOHERENCE)
+#define CONFIG_SYS_DBAT0U	(BATU_BL_2G | BATU_VS | BATU_VP)
+#define CONFIG_SYS_IBAT0L	(BATL_PP_RW | BATL_MEMCOHERENCE )
+#define CONFIG_SYS_IBAT0U	CONFIG_SYS_DBAT0U
 
 /*
- * BAT1		1G     Cache-inhibited, guarded
- * 0x8000_0000	512M   PCI-Express 1 Memory
- * 0xa000_0000	512M   PCI-Express 2 Memory
- *	Changed it for operating from 0xd0000000
+ * BAT1		LBC (PIXIS/CF)
  */
-#define CFG_DBAT1L	( CFG_PCI1_MEM_PHYS | BATL_PP_RW \
+#define CONFIG_SYS_DBAT1L	(BAT_PHYS_ADDR(CONFIG_SYS_LBC_BASE_PHYS) \
+				 | BATL_PP_RW | BATL_CACHEINHIBIT | \
+				 BATL_GUARDEDSTORAGE)
+#define CONFIG_SYS_DBAT1U	(CONFIG_SYS_LBC_BASE | BATU_BL_128K \
+				 | BATU_VS | BATU_VP)
+#define CONFIG_SYS_IBAT1L	(BAT_PHYS_ADDR(CONFIG_SYS_LBC_BASE_PHYS) \
+				 | BATL_PP_RW | BATL_MEMCOHERENCE)
+#define CONFIG_SYS_IBAT1U	CONFIG_SYS_DBAT1U
+
+/* if CONFIG_PCI:
+ * BAT2		PCI1 and PCI1 MEM
+ * if CONFIG_RIO
+ * BAT2		Rapidio Memory
+ */
+#ifdef CONFIG_PCI
+#define CONFIG_SYS_DBAT2L	(BAT_PHYS_ADDR(CONFIG_SYS_PCI1_MEM_PHYS) \
+				 | BATL_PP_RW | BATL_CACHEINHIBIT \
+				 | BATL_GUARDEDSTORAGE)
+#define CONFIG_SYS_DBAT2U	(CONFIG_SYS_PCI1_MEM_BASE | BATU_BL_1G \
+				 | BATU_VS | BATU_VP)
+#define CONFIG_SYS_IBAT2L	(BAT_PHYS_ADDR(CONFIG_SYS_PCI1_MEM_PHYS) \
+				 | BATL_PP_RW | BATL_CACHEINHIBIT)
+#define CONFIG_SYS_IBAT2U	CONFIG_SYS_DBAT2U
+#else /* CONFIG_RIO */
+#define CONFIG_SYS_DBAT2L	(BAT_PHYS_ADDR(CONFIG_SYS_RIO_MEM_PHYS) \
+				 | BATL_PP_RW | BATL_CACHEINHIBIT | \
+				 BATL_GUARDEDSTORAGE)
+#define CONFIG_SYS_DBAT2U	(CONFIG_SYS_RIO_MEM_BASE | BATU_BL_512M \
+				 | BATU_VS | BATU_VP)
+#define CONFIG_SYS_IBAT2L	(BAT_PHYS_ADDR(CONFIG_SYS_RIO_MEM_PHYS) \
+				 | BATL_PP_RW | BATL_CACHEINHIBIT)
+
+#define CONFIG_SYS_DBAT2L	(CONFIG_SYS_RIO_MEM_PHYS | BATL_PP_RW \
 			| BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
-#define CFG_DBAT1U	(CFG_PCI1_MEM_PHYS | BATU_BL_1G | BATU_VS | BATU_VP)
-#define CFG_IBAT1L	(CFG_PCI1_MEM_PHYS | BATL_PP_RW | BATL_CACHEINHIBIT)
-#define CFG_IBAT1U	CFG_DBAT1U
+#define CONFIG_SYS_DBAT2U	(CONFIG_SYS_RIO_MEM_PHYS | BATU_BL_512M | BATU_VS | BATU_VP)
+#define CONFIG_SYS_IBAT2L	(CONFIG_SYS_RIO_MEM_PHYS | BATL_PP_RW | BATL_CACHEINHIBIT)
+#define CONFIG_SYS_IBAT2U	CONFIG_SYS_DBAT2U
+#endif
 
 /*
- * BAT2		512M   Cache-inhibited, guarded
- * 0xc000_0000	512M   RapidIO Memory
+ * BAT3		CCSR Space
+ * This BAT is used early; don't use any macros with ULL - use HIGH/LOW pairs
+ * instead.  The assembler chokes on ULL.
  */
-#define CFG_DBAT2L	(CFG_RIO_MEM_PHYS | BATL_PP_RW \
-			| BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
-#define CFG_DBAT2U	(CFG_RIO_MEM_PHYS | BATU_BL_512M | BATU_VS | BATU_VP)
-#define CFG_IBAT2L	(CFG_RIO_MEM_PHYS | BATL_PP_RW | BATL_CACHEINHIBIT)
-#define CFG_IBAT2U	CFG_DBAT2U
+#define CONFIG_SYS_DBAT3L	(CONFIG_SYS_CCSRBAR_PHYS_LOW \
+				 | PHYS_HIGH_TO_BXPN(CONFIG_SYS_CCSRBAR_PHYS_HIGH) \
+				 | PHYS_HIGH_TO_BX(CONFIG_SYS_CCSRBAR_PHYS_HIGH) \
+				 | BATL_PP_RW | BATL_CACHEINHIBIT \
+				 | BATL_GUARDEDSTORAGE)
+#define CONFIG_SYS_DBAT3U	(CONFIG_SYS_CCSRBAR | BATU_BL_1M | BATU_VS \
+				 | BATU_VP)
+#define CONFIG_SYS_IBAT3L	(CONFIG_SYS_CCSRBAR_PHYS_LOW \
+				 | PHYS_HIGH_TO_BXPN(CONFIG_SYS_CCSRBAR_PHYS_HIGH) \
+				 | PHYS_HIGH_TO_BX(CONFIG_SYS_CCSRBAR_PHYS_HIGH) \
+				 | BATL_PP_RW | BATL_CACHEINHIBIT)
+#define CONFIG_SYS_IBAT3U	CONFIG_SYS_DBAT3U
+
+#if (CONFIG_SYS_CCSRBAR_DEFAULT != CONFIG_SYS_CCSRBAR)
+#define CONFIG_SYS_CCSR_DEFAULT_DBATL (CONFIG_SYS_CCSRBAR_DEFAULT \
+				       | BATL_PP_RW | BATL_CACHEINHIBIT \
+				       | BATL_GUARDEDSTORAGE)
+#define CONFIG_SYS_CCSR_DEFAULT_DBATU (CONFIG_SYS_CCSRBAR_DEFAULT \
+				       | BATU_BL_1M | BATU_VS | BATU_VP)
+#define CONFIG_SYS_CCSR_DEFAULT_IBATL (CONFIG_SYS_CCSRBAR_DEFAULT \
+				       | BATL_PP_RW | BATL_CACHEINHIBIT)
+#define CONFIG_SYS_CCSR_DEFAULT_IBATU CONFIG_SYS_CCSR_DEFAULT_DBATU
+#endif
 
 /*
- * BAT3		4M     Cache-inhibited, guarded
- * 0xf800_0000	4M     CCSR
+ * BAT4		PCI1_IO and PCI2_IO
  */
-#define CFG_DBAT3L	( CFG_CCSRBAR | BATL_PP_RW \
-			| BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
-#define CFG_DBAT3U	(CFG_CCSRBAR | BATU_BL_4M | BATU_VS | BATU_VP)
-#define CFG_IBAT3L	(CFG_CCSRBAR | BATL_PP_RW | BATL_CACHEINHIBIT)
-#define CFG_IBAT3U	CFG_DBAT3U
+#define CONFIG_SYS_DBAT4L	(BAT_PHYS_ADDR(CONFIG_SYS_PCI1_IO_PHYS) \
+				 | BATL_PP_RW | BATL_CACHEINHIBIT \
+				 | BATL_GUARDEDSTORAGE)
+#define CONFIG_SYS_DBAT4U	(CONFIG_SYS_PCI1_IO_VIRT | BATU_BL_128K \
+				 | BATU_VS | BATU_VP)
+#define CONFIG_SYS_IBAT4L	(BAT_PHYS_ADDR(CONFIG_SYS_PCI1_IO_PHYS) \
+				 | BATL_PP_RW | BATL_CACHEINHIBIT)
+#define CONFIG_SYS_IBAT4U	CONFIG_SYS_DBAT4U
 
 /*
- * BAT4		32M    Cache-inhibited, guarded
- * 0xe200_0000	16M    PCI-Express 1 I/O
- * 0xe300_0000	16M    PCI-Express 2 I/0
- *    Note that this is at 0xe0000000
+ * BAT5		Init RAM for stack in the CPU DCache (no backing memory)
  */
-#define CFG_DBAT4L	( CFG_PCI1_IO_PHYS | BATL_PP_RW \
-			| BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
-#define CFG_DBAT4U	(CFG_PCI1_IO_PHYS | BATU_BL_32M | BATU_VS | BATU_VP)
-#define CFG_IBAT4L	(CFG_PCI1_IO_PHYS | BATL_PP_RW | BATL_CACHEINHIBIT)
-#define CFG_IBAT4U	CFG_DBAT4U
+#define CONFIG_SYS_DBAT5L	(CONFIG_SYS_INIT_RAM_ADDR | BATL_PP_RW | BATL_MEMCOHERENCE)
+#define CONFIG_SYS_DBAT5U	(CONFIG_SYS_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP)
+#define CONFIG_SYS_IBAT5L	CONFIG_SYS_DBAT5L
+#define CONFIG_SYS_IBAT5U	CONFIG_SYS_DBAT5U
 
 /*
- * BAT5		128K   Cacheable, non-guarded
- * 0xe401_0000	128K   Init RAM for stack in the CPU DCache (no backing memory)
+ * BAT6		FLASH
  */
-#define CFG_DBAT5L	(CFG_INIT_RAM_ADDR | BATL_PP_RW | BATL_MEMCOHERENCE)
-#define CFG_DBAT5U	(CFG_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP)
-#define CFG_IBAT5L	CFG_DBAT5L
-#define CFG_IBAT5U	CFG_DBAT5U
+#define CONFIG_SYS_DBAT6L	(BAT_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) \
+				 | BATL_PP_RW | BATL_CACHEINHIBIT \
+				 | BATL_GUARDEDSTORAGE)
+#define CONFIG_SYS_DBAT6U	(CONFIG_SYS_FLASH_BASE | BATU_BL_8M | BATU_VS \
+				 | BATU_VP)
+#define CONFIG_SYS_IBAT6L	(BAT_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) \
+				 | BATL_PP_RW | BATL_MEMCOHERENCE)
+#define CONFIG_SYS_IBAT6U	CONFIG_SYS_DBAT6U
+
+/* Map the last 1M of flash where we're running from reset */
+#define CONFIG_SYS_DBAT6L_EARLY	(CONFIG_SYS_MONITOR_BASE_EARLY | BATL_PP_RW \
+				 | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
+#define CONFIG_SYS_DBAT6U_EARLY	(TEXT_BASE | BATU_BL_1M | BATU_VS | BATU_VP)
+#define CONFIG_SYS_IBAT6L_EARLY	(CONFIG_SYS_MONITOR_BASE_EARLY | BATL_PP_RW \
+				 | BATL_MEMCOHERENCE)
+#define CONFIG_SYS_IBAT6U_EARLY	CONFIG_SYS_DBAT6U_EARLY
 
 /*
- * BAT6		32M    Cache-inhibited, guarded
- * 0xfe00_0000	32M    FLASH
+ * BAT7		FREE - used later for tmp mappings
  */
-#define CFG_DBAT6L	((CFG_FLASH_BASE & 0xfe000000) | BATL_PP_RW \
-			| BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
-#define CFG_DBAT6U	((CFG_FLASH_BASE & 0xfe000000) | BATU_BL_32M | BATU_VS | BATU_VP)
-#define CFG_IBAT6L	((CFG_FLASH_BASE & 0xfe000000) | BATL_PP_RW | BATL_MEMCOHERENCE)
-#define CFG_IBAT6U	CFG_DBAT6U
-
-#define CFG_DBAT7L 0x00000000
-#define CFG_DBAT7U 0x00000000
-#define CFG_IBAT7L 0x00000000
-#define CFG_IBAT7U 0x00000000
+#define CONFIG_SYS_DBAT7L 0x00000000
+#define CONFIG_SYS_DBAT7U 0x00000000
+#define CONFIG_SYS_IBAT7L 0x00000000
+#define CONFIG_SYS_IBAT7U 0x00000000
 
 /*
  * Environment
  */
-#ifndef CFG_RAMBOOT
-    #define CFG_ENV_IS_IN_FLASH	1
-    #define CFG_ENV_ADDR		(CFG_MONITOR_BASE + 0x60000)
-    #define CFG_ENV_SECT_SIZE		0x10000	/* 64K(one sector) for env */
-    #define CFG_ENV_SIZE		0x2000
+#ifndef CONFIG_SYS_RAMBOOT
+    #define CONFIG_ENV_IS_IN_FLASH	1
+    #define CONFIG_ENV_ADDR		(CONFIG_SYS_MONITOR_BASE + 0x60000)
+    #define CONFIG_ENV_SECT_SIZE		0x10000	/* 64K(one sector) for env */
 #else
-    #define CFG_ENV_IS_NOWHERE	1	/* Store ENV in memory only */
-    #define CFG_ENV_ADDR		(CFG_MONITOR_BASE - 0x1000)
-    #define CFG_ENV_SIZE		0x2000
+    #define CONFIG_ENV_IS_NOWHERE	1	/* Store ENV in memory only */
+    #define CONFIG_ENV_ADDR		(CONFIG_SYS_MONITOR_BASE - 0x1000)
 #endif
+#define CONFIG_ENV_SIZE		0x2000
 
 #define CONFIG_LOADS_ECHO	1	/* echo on for serial download */
-#define CFG_LOADS_BAUD_CHANGE	1	/* allow baudrate change */
+#define CONFIG_SYS_LOADS_BAUD_CHANGE	1	/* allow baudrate change */
 
 
 /*
@@ -536,7 +634,7 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 #define CONFIG_CMD_I2C
 #define CONFIG_CMD_REGINFO
 
-#if defined(CFG_RAMBOOT)
+#if defined(CONFIG_SYS_RAMBOOT)
     #undef CONFIG_CMD_ENV
 #endif
 
@@ -553,28 +651,28 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 /*
  * Miscellaneous configurable options
  */
-#define CFG_LONGHELP			/* undef to save memory	*/
+#define CONFIG_SYS_LONGHELP			/* undef to save memory	*/
 #define CONFIG_CMDLINE_EDITING		/* Command-line editing */
-#define CFG_LOAD_ADDR	0x2000000	/* default load address */
-#define CFG_PROMPT	"=> "		/* Monitor Command Prompt */
+#define CONFIG_SYS_LOAD_ADDR	0x2000000	/* default load address */
+#define CONFIG_SYS_PROMPT	"=> "		/* Monitor Command Prompt */
 
 #if defined(CONFIG_CMD_KGDB)
-    #define CFG_CBSIZE	1024		/* Console I/O Buffer Size */
+    #define CONFIG_SYS_CBSIZE	1024		/* Console I/O Buffer Size */
 #else
-    #define CFG_CBSIZE	256		/* Console I/O Buffer Size */
+    #define CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size */
 #endif
 
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define CFG_MAXARGS	16		/* max number of command args */
-#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size */
-#define CFG_HZ		1000		/* decrementer freq: 1ms ticks */
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS	16		/* max number of command args */
+#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size */
+#define CONFIG_SYS_HZ		1000		/* decrementer freq: 1ms ticks */
 
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define CFG_BOOTMAPSZ	(8 << 20)	/* Initial Memory map for Linux*/
+#define CONFIG_SYS_BOOTMAPSZ	(8 << 20)	/* Initial Memory map for Linux*/
 
 /*
  * Internal Definitions
@@ -639,8 +737,8 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 	"ramdiskfile=your.ramdisk.u-boot\0"				\
 	"fdtaddr=c00000\0"						\
 	"fdtfile=mpc8641_hpcn.dtb\0"					\
-	"en-wd=mw.b f8100010 0x08; echo -expect:- 08; md.b f8100010 1\0" \
-	"dis-wd=mw.b f8100010 0x00; echo -expect:- 00; md.b f8100010 1\0" \
+	"en-wd=mw.b ffdf0010 0x08; echo -expect:- 08; md.b ffdf0010 1\0"			\
+	"dis-wd=mw.b ffdf0010 0x00; echo -expect:- 00; md.b ffdf0010 1\0" \
 	"maxcpus=2"
 
 
diff --git a/include/configs/MPC86xADS.h b/include/configs/MPC86xADS.h
index 233a8d19f..85c68900c 100644
--- a/include/configs/MPC86xADS.h
+++ b/include/configs/MPC86xADS.h
@@ -35,15 +35,15 @@
 
 #define CONFIG_8xx_OSCLK		10000000 /* 10MHz oscillator on EXTCLK  */
 #define CONFIG_8xx_CPUCLK_DEFAULT	50000000
-#define CFG_8xx_CPUCLK_MIN		40000000
-#define CFG_8xx_CPUCLK_MAX		80000000
+#define CONFIG_SYS_8xx_CPUCLK_MIN		40000000
+#define CONFIG_SYS_8xx_CPUCLK_MAX		80000000
 
 #define CONFIG_DRAM_50MHZ       1
 #define CONFIG_SDRAM_50MHZ      1
 
 #include "../../board/fads/fads.h"
 
-#define CFG_OR5_PRELIM		0xFFFF8110	/* 64Kbyte address space */
-#define CFG_BR5_PRELIM		(CFG_PHYDEV_ADDR | BR_PS_8 | BR_V)
+#define CONFIG_SYS_OR5_PRELIM		0xFFFF8110	/* 64Kbyte address space */
+#define CONFIG_SYS_BR5_PRELIM		(CONFIG_SYS_PHYDEV_ADDR | BR_PS_8 | BR_V)
 
 #endif	/* __CONFIG_H */
diff --git a/include/configs/MPC885ADS.h b/include/configs/MPC885ADS.h
index f4d184277..8ffc1b2b1 100644
--- a/include/configs/MPC885ADS.h
+++ b/include/configs/MPC885ADS.h
@@ -22,15 +22,15 @@
 
 #define CONFIG_8xx_OSCLK		10000000 /* 10 MHz oscillator on EXTCLK  */
 #define CONFIG_8xx_CPUCLK_DEFAULT	50000000
-#define CFG_8xx_CPUCLK_MIN		40000000
-#define CFG_8xx_CPUCLK_MAX		133000000
+#define CONFIG_SYS_8xx_CPUCLK_MIN		40000000
+#define CONFIG_SYS_8xx_CPUCLK_MAX		133000000
 
 #define CONFIG_SDRAM_50MHZ      1
 
 #include "../../board/fads/fads.h"
 
-#define CFG_OR5_PRELIM		0xFFFF8110	/* 64Kbyte address space */
-#define CFG_BR5_PRELIM		(CFG_PHYDEV_ADDR | BR_PS_8 | BR_V)
+#define CONFIG_SYS_OR5_PRELIM		0xFFFF8110	/* 64Kbyte address space */
+#define CONFIG_SYS_BR5_PRELIM		(CONFIG_SYS_PHYDEV_ADDR | BR_PS_8 | BR_V)
 
 #define CONFIG_HAS_ETH1
 
diff --git a/include/configs/MUSENKI.h b/include/configs/MUSENKI.h
index 4319e6c04..ec9e1ec2f 100644
--- a/include/configs/MUSENKI.h
+++ b/include/configs/MUSENKI.h
@@ -48,7 +48,7 @@
 
 #define CONFIG_CONS_INDEX	1
 #define CONFIG_BAUDRATE		9600
-#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
 
 #define CONFIG_BOOTDELAY	5
 
@@ -71,16 +71,16 @@
 /*
  * Miscellaneous configurable options
  */
-#undef CFG_LONGHELP			/* undef to save memory		*/
-#define CFG_PROMPT	"=> "		/* Monitor Command Prompt	*/
-#define CFG_CBSIZE	256		/* Console I/O Buffer Size	*/
+#undef CONFIG_SYS_LONGHELP			/* undef to save memory		*/
+#define CONFIG_SYS_PROMPT	"=> "		/* Monitor Command Prompt	*/
+#define CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size	*/
 
 /* Print Buffer Size
  */
-#define CFG_PBSIZE	(CFG_CBSIZE + sizeof(CFG_PROMPT) + 16)
-#define CFG_MAXARGS	8		/* Max number of command args	*/
-#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size	*/
-#define CFG_LOAD_ADDR	0x00100000	/* Default load address		*/
+#define CONFIG_SYS_PBSIZE	(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
+#define CONFIG_SYS_MAXARGS	8		/* Max number of command args	*/
+#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
+#define CONFIG_SYS_LOAD_ADDR	0x00100000	/* Default load address		*/
 
 /*-----------------------------------------------------------------------
  * PCI stuff
@@ -102,63 +102,63 @@
 /*-----------------------------------------------------------------------
  * Start addresses for the final memory configuration
  * (Set up by the startup code)
- * Please note that CFG_SDRAM_BASE _must_ start at 0
+ * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
  */
-#define CFG_SDRAM_BASE	    0x00000000
+#define CONFIG_SYS_SDRAM_BASE	    0x00000000
 
-#define CFG_FLASH_BASE0_PRELIM      0xFF800000      /* FLASH bank on RCS#0 */
-#define CFG_FLASH_BASE1_PRELIM      0xFF000000      /* FLASH bank on RCS#1 */
-#define CFG_FLASH_BASE  CFG_FLASH_BASE0_PRELIM
+#define CONFIG_SYS_FLASH_BASE0_PRELIM      0xFF800000      /* FLASH bank on RCS#0 */
+#define CONFIG_SYS_FLASH_BASE1_PRELIM      0xFF000000      /* FLASH bank on RCS#1 */
+#define CONFIG_SYS_FLASH_BASE  CONFIG_SYS_FLASH_BASE0_PRELIM
 
 /* even though FLASHP_BASE is FF800000, with 4MB is RCS0, the
  * reset vector is actually located at FFB00100, but the 8245
  * takes care of us.
  */
-#define CFG_RESET_ADDRESS   0xFFF00100
+#define CONFIG_SYS_RESET_ADDRESS   0xFFF00100
 
-#define CFG_EUMB_ADDR	    0xFC000000
+#define CONFIG_SYS_EUMB_ADDR	    0xFC000000
 
-#define CFG_MONITOR_BASE    TEXT_BASE
-#define CFG_MONITOR_LEN	    (256 << 10) /* Reserve 256 kB for Monitor	*/
-#define CFG_MALLOC_LEN	    (128 << 10) /* Reserve 128 kB for malloc()	*/
+#define CONFIG_SYS_MONITOR_BASE    TEXT_BASE
+#define CONFIG_SYS_MONITOR_LEN	    (256 << 10) /* Reserve 256 kB for Monitor	*/
+#define CONFIG_SYS_MALLOC_LEN	    (128 << 10) /* Reserve 128 kB for malloc()	*/
 
-#define CFG_MEMTEST_START   0x00004000	/* memtest works on		*/
-#define CFG_MEMTEST_END	    0x02000000	/* 0 ... 32 MB in DRAM		*/
+#define CONFIG_SYS_MEMTEST_START   0x00004000	/* memtest works on		*/
+#define CONFIG_SYS_MEMTEST_END	    0x02000000	/* 0 ... 32 MB in DRAM		*/
 
 	/* Maximum amount of RAM.
 	 */
-#define CFG_MAX_RAM_SIZE    0x08000000	/* 0 .. 128 MB of (S)DRAM */
+#define CONFIG_SYS_MAX_RAM_SIZE    0x08000000	/* 0 .. 128 MB of (S)DRAM */
 
 
-#if CFG_MONITOR_BASE >= CFG_FLASH_BASE
-#undef CFG_RAMBOOT
+#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE
+#undef CONFIG_SYS_RAMBOOT
 #else
-#define CFG_RAMBOOT
+#define CONFIG_SYS_RAMBOOT
 #endif
 
 /*
  * NS16550 Configuration
  */
-#define CFG_NS16550
-#define CFG_NS16550_SERIAL
+#define CONFIG_SYS_NS16550
+#define CONFIG_SYS_NS16550_SERIAL
 
-#define CFG_NS16550_REG_SIZE	1
+#define CONFIG_SYS_NS16550_REG_SIZE	1
 
-#define CFG_NS16550_CLK		get_bus_freq(0)
+#define CONFIG_SYS_NS16550_CLK		get_bus_freq(0)
 
-#define CFG_NS16550_COM1	(CFG_EUMB_ADDR + 0x4500)
-#define CFG_NS16550_COM2	(CFG_EUMB_ADDR + 0x4600)
+#define CONFIG_SYS_NS16550_COM1	(CONFIG_SYS_EUMB_ADDR + 0x4500)
+#define CONFIG_SYS_NS16550_COM2	(CONFIG_SYS_EUMB_ADDR + 0x4600)
 
 /*-----------------------------------------------------------------------
  * Definitions for initial stack pointer and data area
  */
 
-/* #define CFG_MONITOR_BASE        TEXT_BASE */
-/*#define CFG_GBL_DATA_SIZE    256*/
-#define CFG_GBL_DATA_SIZE      128
-#define CFG_INIT_RAM_ADDR     0x40000000
-#define CFG_INIT_RAM_END      0x1000
-#define CFG_GBL_DATA_OFFSET  (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+/* #define CONFIG_SYS_MONITOR_BASE        TEXT_BASE */
+/*#define CONFIG_SYS_GBL_DATA_SIZE    256*/
+#define CONFIG_SYS_GBL_DATA_SIZE      128
+#define CONFIG_SYS_INIT_RAM_ADDR     0x40000000
+#define CONFIG_SYS_INIT_RAM_END      0x1000
+#define CONFIG_SYS_GBL_DATA_OFFSET  (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
 
 
 /*
@@ -169,41 +169,41 @@
  */
 
 #define CONFIG_SYS_CLK_FREQ  33333333	/* external frequency to pll */
-#define CFG_HZ		     1000
+#define CONFIG_SYS_HZ		     1000
 
 	/* Bit-field values for MCCR1.
 	 */
-#define CFG_ROMNAL	    7
-#define CFG_ROMFAL	    11
-#define CFG_DBUS_SIZE       0x3
+#define CONFIG_SYS_ROMNAL	    7
+#define CONFIG_SYS_ROMFAL	    11
+#define CONFIG_SYS_DBUS_SIZE       0x3
 
 	/* Bit-field values for MCCR2.
 	 */
-#define CFG_TSWAIT	    0x5		    /* Transaction Start Wait States timer */
-#define CFG_REFINT	    0x400	    /* Refresh interval	FIXME: was 0t430		*/
+#define CONFIG_SYS_TSWAIT	    0x5		    /* Transaction Start Wait States timer */
+#define CONFIG_SYS_REFINT	    0x400	    /* Refresh interval	FIXME: was 0t430		*/
 
 	/* Burst To Precharge. Bits of this value go to MCCR3 and MCCR4.
 	 */
-#define CFG_BSTOPRE	    121
+#define CONFIG_SYS_BSTOPRE	    121
 
 	/* Bit-field values for MCCR3.
 	 */
-#define CFG_REFREC	    8	    /* Refresh to activate interval */
+#define CONFIG_SYS_REFREC	    8	    /* Refresh to activate interval */
 
 	/* Bit-field values for MCCR4.
 	 */
-#define CFG_PRETOACT	    3	    /* Precharge to activate interval FIXME: was 2	*/
-#define CFG_ACTTOPRE	    5	    /* Activate to Precharge interval FIXME: was 5	*/
-#define CFG_ACTORW	    3		/* FIXME was 2 */
-#define CFG_SDMODE_CAS_LAT  3	    /* SDMODE CAS latancy */
-#define CFG_SDMODE_WRAP	    0	    /* SDMODE wrap type	*/
-#define CFG_REGISTERD_TYPE_BUFFER 1
-#define CFG_EXTROM	    1
-#define CFG_REGDIMM	    0
+#define CONFIG_SYS_PRETOACT	    3	    /* Precharge to activate interval FIXME: was 2	*/
+#define CONFIG_SYS_ACTTOPRE	    5	    /* Activate to Precharge interval FIXME: was 5	*/
+#define CONFIG_SYS_ACTORW	    3		/* FIXME was 2 */
+#define CONFIG_SYS_SDMODE_CAS_LAT  3	    /* SDMODE CAS latancy */
+#define CONFIG_SYS_SDMODE_WRAP	    0	    /* SDMODE wrap type	*/
+#define CONFIG_SYS_REGISTERD_TYPE_BUFFER 1
+#define CONFIG_SYS_EXTROM	    1
+#define CONFIG_SYS_REGDIMM	    0
 
-#define CFG_PGMAX           0x32 /* how long the 8240 reatins the currently accessed page in memory FIXME: was 0x32*/
+#define CONFIG_SYS_PGMAX           0x32 /* how long the 8240 reatins the currently accessed page in memory FIXME: was 0x32*/
 
-#define CFG_SDRAM_DSCD	0x20	/* SDRAM data in sample clock delay - note bottom 3 bits MUST be 0 */
+#define CONFIG_SYS_SDRAM_DSCD	0x20	/* SDRAM data in sample clock delay - note bottom 3 bits MUST be 0 */
 
 /* Memory bank settings.
  * Only bits 20-29 are actually used from these vales to set the
@@ -212,85 +212,85 @@
  * address. Refer to the MPC8240 book.
  */
 
-#define CFG_BANK0_START	    0x00000000
-#define CFG_BANK0_END	    (CFG_MAX_RAM_SIZE - 1)
-#define CFG_BANK0_ENABLE    1
-#define CFG_BANK1_START	    0x3ff00000
-#define CFG_BANK1_END	    0x3fffffff
-#define CFG_BANK1_ENABLE    0
-#define CFG_BANK2_START	    0x3ff00000
-#define CFG_BANK2_END	    0x3fffffff
-#define CFG_BANK2_ENABLE    0
-#define CFG_BANK3_START	    0x3ff00000
-#define CFG_BANK3_END	    0x3fffffff
-#define CFG_BANK3_ENABLE    0
-#define CFG_BANK4_START	    0x3ff00000
-#define CFG_BANK4_END	    0x3fffffff
-#define CFG_BANK4_ENABLE    0
-#define CFG_BANK5_START	    0x3ff00000
-#define CFG_BANK5_END	    0x3fffffff
-#define CFG_BANK5_ENABLE    0
-#define CFG_BANK6_START	    0x3ff00000
-#define CFG_BANK6_END	    0x3fffffff
-#define CFG_BANK6_ENABLE    0
-#define CFG_BANK7_START	    0x3ff00000
-#define CFG_BANK7_END	    0x3fffffff
-#define CFG_BANK7_ENABLE    0
-
-#define CFG_ODCR	    0xff
-
-#define CFG_IBAT0L  (CFG_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
-#define CFG_IBAT0U  (CFG_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
-
-#define CFG_IBAT1L  (CFG_INIT_RAM_ADDR | BATL_PP_10 | BATL_MEMCOHERENCE)
-#define CFG_IBAT1U  (CFG_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP)
-
-#define CFG_IBAT2L  (0x80000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
-#define CFG_IBAT2U  (0x80000000 | BATU_BL_256M | BATU_VS | BATU_VP)
-
-#define CFG_IBAT3L  (0xF0000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
-#define CFG_IBAT3U  (0xF0000000 | BATU_BL_256M | BATU_VS | BATU_VP)
-
-#define CFG_DBAT0L  CFG_IBAT0L
-#define CFG_DBAT0U  CFG_IBAT0U
-#define CFG_DBAT1L  CFG_IBAT1L
-#define CFG_DBAT1U  CFG_IBAT1U
-#define CFG_DBAT2L  CFG_IBAT2L
-#define CFG_DBAT2U  CFG_IBAT2U
-#define CFG_DBAT3L  CFG_IBAT3L
-#define CFG_DBAT3U  CFG_IBAT3U
+#define CONFIG_SYS_BANK0_START	    0x00000000
+#define CONFIG_SYS_BANK0_END	    (CONFIG_SYS_MAX_RAM_SIZE - 1)
+#define CONFIG_SYS_BANK0_ENABLE    1
+#define CONFIG_SYS_BANK1_START	    0x3ff00000
+#define CONFIG_SYS_BANK1_END	    0x3fffffff
+#define CONFIG_SYS_BANK1_ENABLE    0
+#define CONFIG_SYS_BANK2_START	    0x3ff00000
+#define CONFIG_SYS_BANK2_END	    0x3fffffff
+#define CONFIG_SYS_BANK2_ENABLE    0
+#define CONFIG_SYS_BANK3_START	    0x3ff00000
+#define CONFIG_SYS_BANK3_END	    0x3fffffff
+#define CONFIG_SYS_BANK3_ENABLE    0
+#define CONFIG_SYS_BANK4_START	    0x3ff00000
+#define CONFIG_SYS_BANK4_END	    0x3fffffff
+#define CONFIG_SYS_BANK4_ENABLE    0
+#define CONFIG_SYS_BANK5_START	    0x3ff00000
+#define CONFIG_SYS_BANK5_END	    0x3fffffff
+#define CONFIG_SYS_BANK5_ENABLE    0
+#define CONFIG_SYS_BANK6_START	    0x3ff00000
+#define CONFIG_SYS_BANK6_END	    0x3fffffff
+#define CONFIG_SYS_BANK6_ENABLE    0
+#define CONFIG_SYS_BANK7_START	    0x3ff00000
+#define CONFIG_SYS_BANK7_END	    0x3fffffff
+#define CONFIG_SYS_BANK7_ENABLE    0
+
+#define CONFIG_SYS_ODCR	    0xff
+
+#define CONFIG_SYS_IBAT0L  (CONFIG_SYS_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
+#define CONFIG_SYS_IBAT0U  (CONFIG_SYS_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
+
+#define CONFIG_SYS_IBAT1L  (CONFIG_SYS_INIT_RAM_ADDR | BATL_PP_10 | BATL_MEMCOHERENCE)
+#define CONFIG_SYS_IBAT1U  (CONFIG_SYS_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP)
+
+#define CONFIG_SYS_IBAT2L  (0x80000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
+#define CONFIG_SYS_IBAT2U  (0x80000000 | BATU_BL_256M | BATU_VS | BATU_VP)
+
+#define CONFIG_SYS_IBAT3L  (0xF0000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
+#define CONFIG_SYS_IBAT3U  (0xF0000000 | BATU_BL_256M | BATU_VS | BATU_VP)
+
+#define CONFIG_SYS_DBAT0L  CONFIG_SYS_IBAT0L
+#define CONFIG_SYS_DBAT0U  CONFIG_SYS_IBAT0U
+#define CONFIG_SYS_DBAT1L  CONFIG_SYS_IBAT1L
+#define CONFIG_SYS_DBAT1U  CONFIG_SYS_IBAT1U
+#define CONFIG_SYS_DBAT2L  CONFIG_SYS_IBAT2L
+#define CONFIG_SYS_DBAT2U  CONFIG_SYS_IBAT2U
+#define CONFIG_SYS_DBAT3L  CONFIG_SYS_IBAT3L
+#define CONFIG_SYS_DBAT3U  CONFIG_SYS_IBAT3U
 
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define CFG_BOOTMAPSZ	    (8 << 20)	/* Initial Memory map for Linux */
+#define CONFIG_SYS_BOOTMAPSZ	    (8 << 20)	/* Initial Memory map for Linux */
 
 /*-----------------------------------------------------------------------
  * FLASH organization
  */
-#define CFG_MAX_FLASH_BANKS	2	/* Max number of flash banks		*/
-#define CFG_MAX_FLASH_SECT	64	/* Max number of sectors per flash	*/
+#define CONFIG_SYS_MAX_FLASH_BANKS	2	/* Max number of flash banks		*/
+#define CONFIG_SYS_MAX_FLASH_SECT	64	/* Max number of sectors per flash	*/
 
-#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms) */
-#define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms) */
+#define CONFIG_SYS_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms) */
+#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms) */
 
 
 	/* Warining: environment is not EMBEDDED in the U-Boot code.
 	 * It's stored in flash separately.
 	 */
-#define CFG_ENV_IS_IN_FLASH	    1
-#define CFG_ENV_ADDR		0xFFFF0000
-#define CFG_ENV_SIZE		0x00010000 /* Size of the Environment		*/
-#define CFG_ENV_SECT_SIZE	0x20000 /* Size of the Environment Sector	*/
+#define CONFIG_ENV_IS_IN_FLASH	    1
+#define CONFIG_ENV_ADDR		0xFFFF0000
+#define CONFIG_ENV_SIZE		0x00010000 /* Size of the Environment		*/
+#define CONFIG_ENV_SECT_SIZE	0x20000 /* Size of the Environment Sector	*/
 
 /*-----------------------------------------------------------------------
  * Cache Configuration
  */
-#define CFG_CACHELINE_SIZE	32
+#define CONFIG_SYS_CACHELINE_SIZE	32
 #if defined(CONFIG_CMD_KGDB)
-#  define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value	*/
+#  define CONFIG_SYS_CACHELINE_SHIFT	5	/* log base 2 of the above value	*/
 #endif
 
 /*
diff --git a/include/configs/MVBC_P.h b/include/configs/MVBC_P.h
index 0ce88d6be..cd910ea05 100644
--- a/include/configs/MVBC_P.h
+++ b/include/configs/MVBC_P.h
@@ -32,21 +32,21 @@
 #define CONFIG_MPC5xxx	1
 #define CONFIG_MPC5200 	1
 
-#define CFG_MPC5XXX_CLKIN	33000000
+#define CONFIG_SYS_MPC5XXX_CLKIN	33000000
 
 #define BOOTFLAG_COLD		0x01
 #define BOOTFLAG_WARM		0x02
 
 #define CONFIG_MISC_INIT_R	1
 
-#define CFG_CACHELINE_SIZE	32
+#define CONFIG_SYS_CACHELINE_SIZE	32
 #ifdef CONFIG_CMD_KGDB
-#define CFG_CACHELINE_SHIFT	5
+#define CONFIG_SYS_CACHELINE_SHIFT	5
 #endif
 
 #define CONFIG_PSC_CONSOLE	1
 #define CONFIG_BAUDRATE		115200
-#define CFG_BAUDRATE_TABLE	{9600, 19200, 38400, 57600, 115200, 230400}
+#define CONFIG_SYS_BAUDRATE_TABLE	{9600, 19200, 38400, 57600, 115200, 230400}
 
 #define CONFIG_PCI		1
 #define CONFIG_PCI_PNP		1
@@ -61,7 +61,7 @@
 #define CONFIG_PCI_IO_PHYS	CONFIG_PCI_IO_BUS
 #define CONFIG_PCI_IO_SIZE	0x01000000
 
-#define CFG_XLB_PIPELINING	1
+#define CONFIG_SYS_XLB_PIPELINING	1
 #define CONFIG_HIGH_BATS	1
 
 #define MV_CI			mvBlueCOUGAR-P
@@ -190,63 +190,63 @@
 /*
  * IPB Bus clocking configuration.
  */
-#define CFG_IPBCLK_EQUALS_XLBCLK
-#define CFG_PCICLK_EQUALS_IPBCLK_DIV2
+#define CONFIG_SYS_IPBCLK_EQUALS_XLBCLK
+#define CONFIG_SYS_PCICLK_EQUALS_IPBCLK_DIV2
 
 /*
  * Flash configuration
  */
 #undef 	CONFIG_FLASH_16BIT
-#define CFG_FLASH_CFI
+#define CONFIG_SYS_FLASH_CFI
 #define CONFIG_FLASH_CFI_DRIVER
-#define CFG_FLASH_CFI_AMD_RESET 1
-#define CFG_FLASH_EMPTY_INFO
+#define CONFIG_SYS_FLASH_CFI_AMD_RESET 1
+#define CONFIG_SYS_FLASH_EMPTY_INFO
 
-#define CFG_FLASH_ERASE_TOUT	50000
-#define CFG_FLASH_WRITE_TOUT	1000
+#define CONFIG_SYS_FLASH_ERASE_TOUT	50000
+#define CONFIG_SYS_FLASH_WRITE_TOUT	1000
 
-#define CFG_MAX_FLASH_BANKS	1
-#define CFG_MAX_FLASH_SECT	256
+#define CONFIG_SYS_MAX_FLASH_BANKS	1
+#define CONFIG_SYS_MAX_FLASH_SECT	256
 
-#define CFG_LOWBOOT
-#define CFG_FLASH_BASE		TEXT_BASE
-#define CFG_FLASH_SIZE		0x00800000
+#define CONFIG_SYS_LOWBOOT
+#define CONFIG_SYS_FLASH_BASE		TEXT_BASE
+#define CONFIG_SYS_FLASH_SIZE		0x00800000
 
 /*
  * Environment settings
  */
-#define CFG_ENV_IS_IN_FLASH
-#undef	CFG_FLASH_PROTECTION
+#define CONFIG_ENV_IS_IN_FLASH
+#undef	CONFIG_SYS_FLASH_PROTECTION
 
-#define CFG_ENV_ADDR		0xFFFE0000
-#define CFG_ENV_SIZE		0x10000
-#define CFG_ENV_SECT_SIZE	0x10000
-#define CFG_ENV_ADDR_REDUND	(CFG_ENV_ADDR+CFG_ENV_SIZE)
-#define CFG_ENV_SIZE_REDUND	CFG_ENV_SIZE
+#define CONFIG_ENV_ADDR		0xFFFE0000
+#define CONFIG_ENV_SIZE		0x10000
+#define CONFIG_ENV_SECT_SIZE	0x10000
+#define CONFIG_ENV_ADDR_REDUND	(CONFIG_ENV_ADDR+CONFIG_ENV_SIZE)
+#define CONFIG_ENV_SIZE_REDUND	CONFIG_ENV_SIZE
 
 /*
  * Memory map
  */
-#define CFG_MBAR		0xF0000000
-#define CFG_SDRAM_BASE		0x00000000
-#define CFG_DEFAULT_MBAR	0x80000000
+#define CONFIG_SYS_MBAR		0xF0000000
+#define CONFIG_SYS_SDRAM_BASE		0x00000000
+#define CONFIG_SYS_DEFAULT_MBAR	0x80000000
 
-#define CFG_INIT_RAM_ADDR	MPC5XXX_SRAM
-#define CFG_INIT_RAM_END	MPC5XXX_SRAM_SIZE
+#define CONFIG_SYS_INIT_RAM_ADDR	MPC5XXX_SRAM
+#define CONFIG_SYS_INIT_RAM_END	MPC5XXX_SRAM_SIZE
 
-#define CFG_GBL_DATA_SIZE	128
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_GBL_DATA_SIZE	128
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
-#define CFG_MONITOR_BASE	TEXT_BASE
-#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
-#define CFG_RAMBOOT		1
+#define CONFIG_SYS_MONITOR_BASE	TEXT_BASE
+#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
+#define CONFIG_SYS_RAMBOOT		1
 #endif
 
-/* CFG_MONITOR_LEN must be a multiple of CFG_ENV_SECT_SIZE */
-#define CFG_MONITOR_LEN		(512 << 10)
-#define CFG_MALLOC_LEN		(512 << 10)
-#define CFG_BOOTMAPSZ		(8 << 20)
+/* CONFIG_SYS_MONITOR_LEN must be a multiple of CONFIG_ENV_SECT_SIZE */
+#define CONFIG_SYS_MONITOR_LEN		(512 << 10)
+#define CONFIG_SYS_MALLOC_LEN		(512 << 10)
+#define CONFIG_SYS_BOOTMAPSZ		(8 << 20)
 
 /*
  * Ethernet configuration
@@ -263,52 +263,52 @@
 /*
  * Miscellaneous configurable options
  */
-#define CFG_HUSH_PARSER
+#define CONFIG_SYS_HUSH_PARSER
 #define CONFIG_CMDLINE_EDITING
-#define CFG_PROMPT_HUSH_PS2 	"> "
-#undef 	CFG_LONGHELP
-#define CFG_PROMPT		"=> "
+#define CONFIG_SYS_PROMPT_HUSH_PS2 	"> "
+#undef 	CONFIG_SYS_LONGHELP
+#define CONFIG_SYS_PROMPT		"=> "
 #ifdef CONFIG_CMD_KGDB
-#define CFG_CBSIZE		1024
+#define CONFIG_SYS_CBSIZE		1024
 #else
-#define CFG_CBSIZE		256
+#define CONFIG_SYS_CBSIZE		256
 #endif
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16)
-#define CFG_MAXARGS		16
-#define CFG_BARGSIZE		CFG_CBSIZE
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
+#define CONFIG_SYS_MAXARGS		16
+#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE
 
-#define CFG_MEMTEST_START	0x00800000
-#define CFG_MEMTEST_END		0x02f00000
+#define CONFIG_SYS_MEMTEST_START	0x00800000
+#define CONFIG_SYS_MEMTEST_END		0x02f00000
 
-#define CFG_HZ			1000
+#define CONFIG_SYS_HZ			1000
 
 /* default load address */
-#define CFG_LOAD_ADDR		0x02000000
+#define CONFIG_SYS_LOAD_ADDR		0x02000000
 /* default location for tftp and bootm */
 #define CONFIG_LOADADDR 	0x00200000
 
 /*
  * Various low-level settings
  */
-#define CFG_GPS_PORT_CONFIG	0x20000004
+#define CONFIG_SYS_GPS_PORT_CONFIG	0x20000004
 
-#define CFG_HID0_INIT		(HID0_ICE | HID0_ICFI)
-#define CFG_HID0_FINAL		HID0_ICE
+#define CONFIG_SYS_HID0_INIT		(HID0_ICE | HID0_ICFI)
+#define CONFIG_SYS_HID0_FINAL		HID0_ICE
 
-#define CFG_BOOTCS_START	CFG_FLASH_BASE
-#define CFG_BOOTCS_SIZE		CFG_FLASH_SIZE
-#define CFG_BOOTCS_CFG		0x00047800
-#define CFG_CS0_START		CFG_FLASH_BASE
-#define CFG_CS0_SIZE		CFG_FLASH_SIZE
+#define CONFIG_SYS_BOOTCS_START	CONFIG_SYS_FLASH_BASE
+#define CONFIG_SYS_BOOTCS_SIZE		CONFIG_SYS_FLASH_SIZE
+#define CONFIG_SYS_BOOTCS_CFG		0x00047800
+#define CONFIG_SYS_CS0_START		CONFIG_SYS_FLASH_BASE
+#define CONFIG_SYS_CS0_SIZE		CONFIG_SYS_FLASH_SIZE
 
-#define CFG_CS_BURST		0x000000f0
-#define CFG_CS_DEADCYCLE	0x33333303
+#define CONFIG_SYS_CS_BURST		0x000000f0
+#define CONFIG_SYS_CS_DEADCYCLE	0x33333303
 
-#define CFG_RESET_ADDRESS	0x00000100
+#define CONFIG_SYS_RESET_ADDRESS	0x00000100
 
 #undef FPGA_DEBUG
-#undef CFG_FPGA_PROG_FEEDBACK
-#define CONFIG_FPGA		CFG_ALTERA_CYCLON2
+#undef CONFIG_SYS_FPGA_PROG_FEEDBACK
+#define CONFIG_FPGA		CONFIG_SYS_ALTERA_CYCLON2
 #define CONFIG_FPGA_ALTERA	1
 #define CONFIG_FPGA_CYCLON2	1
 #define CONFIG_FPGA_COUNT	1
diff --git a/include/configs/MVBLM7.h b/include/configs/MVBLM7.h
index 849350fd8..4ecf8068e 100644
--- a/include/configs/MVBLM7.h
+++ b/include/configs/MVBLM7.h
@@ -37,7 +37,7 @@
 #define CONFIG_MPC834X	1
 #define CONFIG_MPC8343	1
 
-#define CFG_IMMR		0xE0000000
+#define CONFIG_SYS_IMMR		0xE0000000
 
 #define CONFIG_PCI
 #define CONFIG_83XX_GENERIC_PCI
@@ -54,94 +54,93 @@
 #define CONFIG_FSL_I2C
 #define CONFIG_I2C_MULTI_BUS
 #define CONFIG_I2C_CMD_TREE
-#define CFG_I2C_OFFSET		0x3000
-#define CFG_I2C2_OFFSET		0x3100
+#define CONFIG_SYS_I2C_OFFSET		0x3000
+#define CONFIG_SYS_I2C2_OFFSET		0x3100
 
-#define CFG_I2C_SPEED		100000
-#define CFG_I2C_SLAVE		0x7F
+#define CONFIG_SYS_I2C_SPEED		100000
+#define CONFIG_SYS_I2C_SLAVE		0x7F
 
 /*
  * DDR Setup
  */
-#define CFG_DDR_BASE		0x00000000
-#define CFG_SDRAM_BASE		CFG_DDR_BASE
-#define CFG_DDR_SDRAM_BASE	CFG_DDR_BASE
-#define CFG_83XX_DDR_USES_CS0	1
-#define CFG_MEMTEST_START	(60<<20)
-#define CFG_MEMTEST_END		(70<<20)
-
-#define CFG_DDR_SDRAM_CLK_CNTL	(DDR_SDRAM_CLK_CNTL_SS_EN | \
+#define CONFIG_SYS_DDR_BASE		0x00000000
+#define CONFIG_SYS_SDRAM_BASE		CONFIG_SYS_DDR_BASE
+#define CONFIG_SYS_DDR_SDRAM_BASE	CONFIG_SYS_DDR_BASE
+#define CONFIG_SYS_83XX_DDR_USES_CS0	1
+#define CONFIG_SYS_MEMTEST_START	(60<<20)
+#define CONFIG_SYS_MEMTEST_END		(70<<20)
+
+#define CONFIG_SYS_DDR_SDRAM_CLK_CNTL	(DDR_SDRAM_CLK_CNTL_SS_EN | \
 				DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05
 
-#define CFG_DDR_SIZE		256
+#define CONFIG_SYS_DDR_SIZE		256
 
 /* HC, 75Ohm, DDR-II, DRQ */
-#define CFG_DDRCDR		0x80000001
+#define CONFIG_SYS_DDRCDR		0x80000001
 /* EN, ODT_WR, 3BA, 14row, 10col */
-#define CFG_DDR_CS0_CONFIG	0x80014102
-#define CFG_DDR_CS1_CONFIG	0x0
-#define CFG_DDR_CS2_CONFIG	0x0
-#define CFG_DDR_CS3_CONFIG	0x0
+#define CONFIG_SYS_DDR_CS0_CONFIG	0x80014102
+#define CONFIG_SYS_DDR_CS1_CONFIG	0x0
+#define CONFIG_SYS_DDR_CS2_CONFIG	0x0
+#define CONFIG_SYS_DDR_CS3_CONFIG	0x0
 
-#define CFG_DDR_CS0_BNDS	0x0000000f
-#define CFG_DDR_CS1_BNDS	0x0
-#define CFG_DDR_CS2_BNDS	0x0
-#define CFG_DDR_CS3_BNDS	0x0
+#define CONFIG_SYS_DDR_CS0_BNDS	0x0000000f
+#define CONFIG_SYS_DDR_CS1_BNDS	0x0
+#define CONFIG_SYS_DDR_CS2_BNDS	0x0
+#define CONFIG_SYS_DDR_CS3_BNDS	0x0
 
-#define CFG_DDR_CLK_CNTL	0x02000000
+#define CONFIG_SYS_DDR_CLK_CNTL	0x02000000
 
-#define CFG_DDR_TIMING_0	0x00260802
-#define CFG_DDR_TIMING_1	0x2625b221
-#define CFG_DDR_TIMING_2	0x1f9820c7
-#define CFG_DDR_TIMING_3	0x00000000
+#define CONFIG_SYS_DDR_TIMING_0	0x00260802
+#define CONFIG_SYS_DDR_TIMING_1	0x2625b221
+#define CONFIG_SYS_DDR_TIMING_2	0x1f9820c7
+#define CONFIG_SYS_DDR_TIMING_3	0x00000000
 
 /* ~MEM_EN, SREN, DDR-II, 32_BE */
-#define CFG_DDR_SDRAM_CFG	0x43080000
-#define CFG_DDR_SDRAM_CFG2	0x00401000
-#define CFG_DDR_INTERVAL	0x04060100
+#define CONFIG_SYS_DDR_SDRAM_CFG	0x43080000
+#define CONFIG_SYS_DDR_SDRAM_CFG2	0x00401000
+#define CONFIG_SYS_DDR_INTERVAL	0x04060100
 
-#define CFG_DDR_MODE		0x078e0232
+#define CONFIG_SYS_DDR_MODE		0x078e0232
 
 /* Flash */
-#define CFG_FLASH_CFI
+#define CONFIG_SYS_FLASH_CFI
 #define CONFIG_FLASH_CFI_DRIVER
-#define CFG_FLASH_CFI_WIDTH	FLASH_CFI_16BIT
-
-#define CFG_FLASH_BASE		0xFF800000
-#define CFG_FLASH_SIZE		8
-#define CFG_FLASH_SIZE_SHIFT	3
-#define CFG_FLASH_EMPTY_INFO
-#define CFG_FLASH_ERASE_TOUT	60000
-#define CFG_FLASH_WRITE_TOUT	500
-#define CFG_MAX_FLASH_BANKS	1
-#define CFG_MAX_FLASH_SECT	256
-
-#define CFG_BR0_PRELIM		(CFG_FLASH_BASE | BR_PS_16 | BR_V)
-#define CFG_OR0_PRELIM		((~(CFG_FLASH_SIZE - 1) << 20) | OR_UPM_XAM |  \
+#define CONFIG_SYS_FLASH_CFI_WIDTH	FLASH_CFI_16BIT
+
+#define CONFIG_SYS_FLASH_BASE		0xFF800000
+#define CONFIG_SYS_FLASH_SIZE		8
+#define CONFIG_SYS_FLASH_SIZE_SHIFT	3
+#define CONFIG_SYS_FLASH_EMPTY_INFO
+#define CONFIG_SYS_FLASH_ERASE_TOUT	60000
+#define CONFIG_SYS_FLASH_WRITE_TOUT	500
+#define CONFIG_SYS_MAX_FLASH_BANKS	1
+#define CONFIG_SYS_MAX_FLASH_SECT	256
+
+#define CONFIG_SYS_BR0_PRELIM		(CONFIG_SYS_FLASH_BASE | BR_PS_16 | BR_V)
+#define CONFIG_SYS_OR0_PRELIM		((~(CONFIG_SYS_FLASH_SIZE - 1) << 20) | OR_UPM_XAM |  \
 				OR_GPCM_CSNT | OR_GPCM_ACS_DIV2 | OR_GPCM_XACS|\
 				OR_GPCM_SCY_15 | OR_GPCM_TRLX | OR_GPCM_EHTR | \
 				OR_GPCM_EAD)
-#define CFG_LBLAWBAR0_PRELIM	CFG_FLASH_BASE
-#define CFG_LBLAWAR0_PRELIM	(LBLAWAR_EN | (0x13 + CFG_FLASH_SIZE_SHIFT))
+#define CONFIG_SYS_LBLAWBAR0_PRELIM	CONFIG_SYS_FLASH_BASE
+#define CONFIG_SYS_LBLAWAR0_PRELIM	(LBLAWAR_EN | (0x13 + CONFIG_SYS_FLASH_SIZE_SHIFT))
 
 /*
  * U-Boot memory configuration
  */
-#define CFG_MONITOR_BASE	TEXT_BASE
-#undef	CFG_RAMBOOT
+#define CONFIG_SYS_MONITOR_BASE	TEXT_BASE
+#undef	CONFIG_SYS_RAMBOOT
 
-#define CONFIG_L1_INIT_RAM
-#define CFG_INIT_RAM_LOCK
-#define CFG_INIT_RAM_ADDR	0xFD000000	/* Initial RAM address */
-#define CFG_INIT_RAM_END	0x1000		/* End of used area in RAM*/
+#define CONFIG_SYS_INIT_RAM_LOCK
+#define CONFIG_SYS_INIT_RAM_ADDR	0xFD000000	/* Initial RAM address */
+#define CONFIG_SYS_INIT_RAM_END	0x1000		/* End of used area in RAM*/
 
-#define CFG_GBL_DATA_SIZE	0x100		/* num bytes initial data */
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_GBL_DATA_SIZE	0x100		/* num bytes initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
-/* CFG_MONITOR_LEN must be a multiple of CFG_ENV_SECT_SIZE */
-#define CFG_MONITOR_LEN		(512 * 1024)
-#define CFG_MALLOC_LEN		(512 * 1024)
+/* CONFIG_SYS_MONITOR_LEN must be a multiple of CONFIG_ENV_SECT_SIZE */
+#define CONFIG_SYS_MONITOR_LEN		(512 * 1024)
+#define CONFIG_SYS_MALLOC_LEN		(512 * 1024)
 
 /*
  * Local Bus LCRR and LBCR regs
@@ -149,32 +148,32 @@
  * External Local Bus rate is
  *  CLKIN * HRCWL_CSB_TO_CLKIN / HRCWL_LCL_BUS_TO_SCB_CLK / LCRR_CLKDIV
  */
-#define CFG_LCRR	(LCRR_DBYP | LCRR_CLKDIV_4)
-#define CFG_LBC_LBCR	0x00000000
+#define CONFIG_SYS_LCRR	(LCRR_DBYP | LCRR_CLKDIV_4)
+#define CONFIG_SYS_LBC_LBCR	0x00000000
 
 /* LB sdram refresh timer, about 6us */
-#define CFG_LBC_LSRT	0x32000000
+#define CONFIG_SYS_LBC_LSRT	0x32000000
 /* LB refresh timer prescal, 266MHz/32*/
-#define CFG_LBC_MRTPR	0x20000000
+#define CONFIG_SYS_LBC_MRTPR	0x20000000
 
 /*
  * Serial Port
  */
 #define CONFIG_CONS_INDEX	1
 #undef	CONFIG_SERIAL_SOFTWARE_FIFO
-#define CFG_NS16550
-#define CFG_NS16550_SERIAL
-#define CFG_NS16550_REG_SIZE	1
-#define CFG_NS16550_CLK		get_bus_freq(0)
+#define CONFIG_SYS_NS16550
+#define CONFIG_SYS_NS16550_SERIAL
+#define CONFIG_SYS_NS16550_REG_SIZE	1
+#define CONFIG_SYS_NS16550_CLK		get_bus_freq(0)
 
-#define CFG_BAUDRATE_TABLE  \
+#define CONFIG_SYS_BAUDRATE_TABLE  \
 	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 115200}
 
 #define CONFIG_CONSOLE		ttyS0
 #define CONFIG_BAUDRATE		115200
 
-#define CFG_NS16550_COM1	(CFG_IMMR + 0x4500)
-#define CFG_NS16550_COM2	(CFG_IMMR + 0x4600)
+#define CONFIG_SYS_NS16550_COM1	(CONFIG_SYS_IMMR + 0x4500)
+#define CONFIG_SYS_NS16550_COM2	(CONFIG_SYS_IMMR + 0x4600)
 
 /* pass open firmware flat tree */
 #define CONFIG_OF_LIBFDT		1
@@ -185,15 +184,15 @@
 /*
  * PCI
  */
-#define CFG_PCI1_MEM_BASE	0x80000000
-#define CFG_PCI1_MEM_PHYS	CFG_PCI1_MEM_BASE
-#define CFG_PCI1_MEM_SIZE	0x10000000
-#define CFG_PCI1_MMIO_BASE	(CFG_PCI1_MEM_BASE + CFG_PCI1_MEM_SIZE)
-#define CFG_PCI1_MMIO_PHYS	CFG_PCI1_MMIO_BASE
-#define CFG_PCI1_MMIO_SIZE	0x10000000
-#define CFG_PCI1_IO_BASE	0x00000000
-#define CFG_PCI1_IO_PHYS	0xE2000000
-#define CFG_PCI1_IO_SIZE	0x01000000
+#define CONFIG_SYS_PCI1_MEM_BASE	0x80000000
+#define CONFIG_SYS_PCI1_MEM_PHYS	CONFIG_SYS_PCI1_MEM_BASE
+#define CONFIG_SYS_PCI1_MEM_SIZE	0x10000000
+#define CONFIG_SYS_PCI1_MMIO_BASE	(CONFIG_SYS_PCI1_MEM_BASE + CONFIG_SYS_PCI1_MEM_SIZE)
+#define CONFIG_SYS_PCI1_MMIO_PHYS	CONFIG_SYS_PCI1_MMIO_BASE
+#define CONFIG_SYS_PCI1_MMIO_SIZE	0x10000000
+#define CONFIG_SYS_PCI1_IO_BASE	0x00000000
+#define CONFIG_SYS_PCI1_IO_PHYS	0xE2000000
+#define CONFIG_SYS_PCI1_IO_SIZE	0x01000000
 
 #define _IO_BASE		0x00000000
 
@@ -207,9 +206,9 @@
 
 /* TSEC */
 #define CONFIG_GMII
-#define CFG_VSC8601_SKEWFIX
-#define	CFG_VSC8601_SKEW_TX	3
-#define	CFG_VSC8601_SKEW_RX	3
+#define CONFIG_SYS_VSC8601_SKEWFIX
+#define	CONFIG_SYS_VSC8601_SKEW_TX	3
+#define	CONFIG_SYS_VSC8601_SKEW_RX	3
 
 #define CONFIG_TSEC1
 #define CONFIG_TSEC2
@@ -217,8 +216,8 @@
 #define CONFIG_HAS_ETH0
 #define CONFIG_TSEC1_NAME	"TSEC0"
 #define CONFIG_FEC1_PHY_NORXERR
-#define CFG_TSEC1_OFFSET	0x24000
-#define CFG_TSEC1		(CFG_IMMR+CFG_TSEC1_OFFSET)
+#define CONFIG_SYS_TSEC1_OFFSET	0x24000
+#define CONFIG_SYS_TSEC1		(CONFIG_SYS_IMMR+CONFIG_SYS_TSEC1_OFFSET)
 #define TSEC1_PHY_ADDR		0x10
 #define TSEC1_PHYIDX		0
 #define TSEC1_FLAGS		(TSEC_GIGABIT|TSEC_REDUCED)
@@ -226,8 +225,8 @@
 #define CONFIG_HAS_ETH1
 #define CONFIG_TSEC2_NAME  	"TSEC1"
 #define CONFIG_FEC2_PHY_NORXERR
-#define CFG_TSEC2_OFFSET	0x25000
-#define CFG_TSEC2 		(CFG_IMMR+CFG_TSEC2_OFFSET)
+#define CONFIG_SYS_TSEC2_OFFSET	0x25000
+#define CONFIG_SYS_TSEC2 		(CONFIG_SYS_IMMR+CONFIG_SYS_TSEC2_OFFSET)
 #define TSEC2_PHY_ADDR		0x11
 #define TSEC2_PHYIDX		0
 #define TSEC2_FLAGS		(TSEC_GIGABIT|TSEC_REDUCED)
@@ -252,18 +251,18 @@
 /*
  * Environment
  */
-#undef  CFG_FLASH_PROTECTION
+#undef  CONFIG_SYS_FLASH_PROTECTION
 #define CONFIG_ENV_OVERWRITE
 
-#define CFG_ENV_IS_IN_FLASH	1
-#define CFG_ENV_ADDR		0xFF800000
-#define CFG_ENV_SIZE		0x2000
-#define CFG_ENV_SECT_SIZE	0x2000
-#define CFG_ENV_ADDR_REDUND	(CFG_ENV_ADDR+CFG_ENV_SIZE)
-#define CFG_ENV_SIZE_REDUND 	CFG_ENV_SIZE
+#define CONFIG_ENV_IS_IN_FLASH	1
+#define CONFIG_ENV_ADDR		0xFF800000
+#define CONFIG_ENV_SIZE		0x2000
+#define CONFIG_ENV_SECT_SIZE	0x2000
+#define CONFIG_ENV_ADDR_REDUND	(CONFIG_ENV_ADDR+CONFIG_ENV_SIZE)
+#define CONFIG_ENV_SIZE_REDUND 	CONFIG_ENV_SIZE
 
 #define CONFIG_LOADS_ECHO
-#define CFG_LOADS_BAUD_CHANGE
+#define CONFIG_SYS_LOADS_BAUD_CHANGE
 
 /*
  * Command line configuration.
@@ -286,102 +285,102 @@
 /*
  * Miscellaneous configurable options
  */
-#define CFG_LONGHELP
+#define CONFIG_SYS_LONGHELP
 #define CONFIG_CMDLINE_EDITING
-#define CFG_HUSH_PARSER
-#define CFG_PROMPT_HUSH_PS2 "> "
+#define CONFIG_SYS_HUSH_PARSER
+#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
 
 /* default load address */
-#define CFG_LOAD_ADDR	0x2000000
+#define CONFIG_SYS_LOAD_ADDR	0x2000000
 /* default location for tftp and bootm */
 #define CONFIG_LOADADDR	0x200000
 
-#define CFG_PROMPT	"mvBL-M7> "
-#define CFG_CBSIZE	256
+#define CONFIG_SYS_PROMPT	"mvBL-M7> "
+#define CONFIG_SYS_CBSIZE	256
 
-#define CFG_PBSIZE	(CFG_CBSIZE + sizeof(CFG_PROMPT) + 16)
-#define CFG_MAXARGS	16
-#define CFG_BARGSIZE	CFG_CBSIZE
-#define CFG_HZ		1000
+#define CONFIG_SYS_PBSIZE	(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
+#define CONFIG_SYS_MAXARGS	16
+#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE
+#define CONFIG_SYS_HZ		1000
 
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define CFG_BOOTMAPSZ	(8 << 20)	/* Initial Memory map for Linux*/
+#define CONFIG_SYS_BOOTMAPSZ	(8 << 20)	/* Initial Memory map for Linux*/
 
-#define CFG_HRCW_LOW	0x0
-#define CFG_HRCW_HIGH	0x0
+#define CONFIG_SYS_HRCW_LOW	0x0
+#define CONFIG_SYS_HRCW_HIGH	0x0
 
 /*
  * System performance
  */
-#define CFG_ACR_PIPE_DEP	3	/* Arbiter pipeline depth (0-3) */
-#define CFG_ACR_RPTCNT		3	/* Arbiter repeat count (0-7) */
-#define CFG_SPCR_TSEC1EP	3	/* TSEC1 emergency priority (0-3) */
-#define CFG_SPCR_TSEC2EP	3	/* TSEC2 emergency priority (0-3) */
+#define CONFIG_SYS_ACR_PIPE_DEP	3	/* Arbiter pipeline depth (0-3) */
+#define CONFIG_SYS_ACR_RPTCNT		3	/* Arbiter repeat count (0-7) */
+#define CONFIG_SYS_SPCR_TSEC1EP	3	/* TSEC1 emergency priority (0-3) */
+#define CONFIG_SYS_SPCR_TSEC2EP	3	/* TSEC2 emergency priority (0-3) */
 
 /* clocking */
-#define CFG_SCCR_ENCCM		0
-#define CFG_SCCR_USBMPHCM	0
-#define	CFG_SCCR_USBDRCM	2
-#define CFG_SCCR_TSEC1CM	1
-#define CFG_SCCR_TSEC2CM	1
+#define CONFIG_SYS_SCCR_ENCCM		0
+#define CONFIG_SYS_SCCR_USBMPHCM	0
+#define	CONFIG_SYS_SCCR_USBDRCM	2
+#define CONFIG_SYS_SCCR_TSEC1CM	1
+#define CONFIG_SYS_SCCR_TSEC2CM	1
 
-#define CFG_SICRH	0x1fff8003
-#define CFG_SICRL	(SICRL_LDP_A | SICRL_USB1 | SICRL_USB0)
+#define CONFIG_SYS_SICRH	0x1fff8003
+#define CONFIG_SYS_SICRL	(SICRL_LDP_A | SICRL_USB1 | SICRL_USB0)
 
-#define CFG_HID0_INIT	0x000000000
-#define CFG_HID0_FINAL	CFG_HID0_INIT
+#define CONFIG_SYS_HID0_INIT	0x000000000
+#define CONFIG_SYS_HID0_FINAL	CONFIG_SYS_HID0_INIT
 
-#define CFG_HID2	HID2_HBE
+#define CONFIG_SYS_HID2	HID2_HBE
 #define CONFIG_HIGH_BATS	1
 
 /* DDR  */
-#define CFG_IBAT0L	(CFG_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
-#define CFG_IBAT0U	(CFG_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CONFIG_SYS_IBAT0L	(CONFIG_SYS_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
+#define CONFIG_SYS_IBAT0U	(CONFIG_SYS_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
 
 /* PCI  */
-#define CFG_IBAT1L	(CFG_PCI1_MEM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
-#define CFG_IBAT1U	(CFG_PCI1_MEM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
-#define CFG_IBAT2L	(CFG_PCI1_MMIO_BASE | BATL_PP_10 | BATL_CACHEINHIBIT |\
+#define CONFIG_SYS_IBAT1L	(CONFIG_SYS_PCI1_MEM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
+#define CONFIG_SYS_IBAT1U	(CONFIG_SYS_PCI1_MEM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CONFIG_SYS_IBAT2L	(CONFIG_SYS_PCI1_MMIO_BASE | BATL_PP_10 | BATL_CACHEINHIBIT |\
 				BATL_GUARDEDSTORAGE)
-#define CFG_IBAT2U	(CFG_PCI1_MMIO_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CONFIG_SYS_IBAT2U	(CONFIG_SYS_PCI1_MMIO_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
 
 /* no PCI2 */
-#define CFG_IBAT3L	0
-#define CFG_IBAT3U	0
-#define CFG_IBAT4L	0
-#define CFG_IBAT4U	0
+#define CONFIG_SYS_IBAT3L	0
+#define CONFIG_SYS_IBAT3U	0
+#define CONFIG_SYS_IBAT4L	0
+#define CONFIG_SYS_IBAT4U	0
 
 /* IMMRBAR @ 0xE0000000, PCI IO @ 0xE2000000 & BCSR @ 0xE2400000 */
-#define CFG_IBAT5L	(CFG_IMMR | BATL_PP_10 | BATL_CACHEINHIBIT | \
+#define CONFIG_SYS_IBAT5L	(CONFIG_SYS_IMMR | BATL_PP_10 | BATL_CACHEINHIBIT | \
 				BATL_GUARDEDSTORAGE)
-#define CFG_IBAT5U	(CFG_IMMR | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CONFIG_SYS_IBAT5U	(CONFIG_SYS_IMMR | BATU_BL_256M | BATU_VS | BATU_VP)
 
 /* stack in DCACHE 0xFDF00000 & FLASH @ 0xFF800000 */
-#define CFG_IBAT6L	(0xF0000000 | BATL_PP_10 | BATL_MEMCOHERENCE)
-#define CFG_IBAT6U	(0xF0000000 | BATU_BL_256M | BATU_VS | BATU_VP)
-#define CFG_IBAT7L	0
-#define CFG_IBAT7U	0
-
-#define CFG_DBAT0L	CFG_IBAT0L
-#define CFG_DBAT0U	CFG_IBAT0U
-#define CFG_DBAT1L	CFG_IBAT1L
-#define CFG_DBAT1U	CFG_IBAT1U
-#define CFG_DBAT2L	CFG_IBAT2L
-#define CFG_DBAT2U	CFG_IBAT2U
-#define CFG_DBAT3L	CFG_IBAT3L
-#define CFG_DBAT3U	CFG_IBAT3U
-#define CFG_DBAT4L	CFG_IBAT4L
-#define CFG_DBAT4U	CFG_IBAT4U
-#define CFG_DBAT5L	CFG_IBAT5L
-#define CFG_DBAT5U	CFG_IBAT5U
-#define CFG_DBAT6L	CFG_IBAT6L
-#define CFG_DBAT6U	CFG_IBAT6U
-#define CFG_DBAT7L	CFG_IBAT7L
-#define CFG_DBAT7U	CFG_IBAT7U
+#define CONFIG_SYS_IBAT6L	(0xF0000000 | BATL_PP_10 | BATL_MEMCOHERENCE)
+#define CONFIG_SYS_IBAT6U	(0xF0000000 | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CONFIG_SYS_IBAT7L	0
+#define CONFIG_SYS_IBAT7U	0
+
+#define CONFIG_SYS_DBAT0L	CONFIG_SYS_IBAT0L
+#define CONFIG_SYS_DBAT0U	CONFIG_SYS_IBAT0U
+#define CONFIG_SYS_DBAT1L	CONFIG_SYS_IBAT1L
+#define CONFIG_SYS_DBAT1U	CONFIG_SYS_IBAT1U
+#define CONFIG_SYS_DBAT2L	CONFIG_SYS_IBAT2L
+#define CONFIG_SYS_DBAT2U	CONFIG_SYS_IBAT2U
+#define CONFIG_SYS_DBAT3L	CONFIG_SYS_IBAT3L
+#define CONFIG_SYS_DBAT3U	CONFIG_SYS_IBAT3U
+#define CONFIG_SYS_DBAT4L	CONFIG_SYS_IBAT4L
+#define CONFIG_SYS_DBAT4U	CONFIG_SYS_IBAT4U
+#define CONFIG_SYS_DBAT5L	CONFIG_SYS_IBAT5L
+#define CONFIG_SYS_DBAT5U	CONFIG_SYS_IBAT5U
+#define CONFIG_SYS_DBAT6L	CONFIG_SYS_IBAT6L
+#define CONFIG_SYS_DBAT6U	CONFIG_SYS_IBAT6U
+#define CONFIG_SYS_DBAT7L	CONFIG_SYS_IBAT7L
+#define CONFIG_SYS_DBAT7U	CONFIG_SYS_IBAT7U
 
 /*
  * Internal Definitions
@@ -475,7 +474,7 @@
 	""
 
 #define CONFIG_FPGA_COUNT	1
-#define CONFIG_FPGA		CFG_ALTERA_CYCLON2
+#define CONFIG_FPGA		CONFIG_SYS_ALTERA_CYCLON2
 #define CONFIG_FPGA_ALTERA
 #define CONFIG_FPGA_CYCLON2
 
diff --git a/include/configs/MVBLUE.h b/include/configs/MVBLUE.h
index 8e247af63..31b9f038b 100644
--- a/include/configs/MVBLUE.h
+++ b/include/configs/MVBLUE.h
@@ -63,7 +63,7 @@
 
 #define CONFIG_CONS_INDEX	1
 #define CONFIG_BAUDRATE		115200
-#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
 
 #define CONFIG_BOOTDELAY	3
 #define CONFIG_BOOT_RETRY_TIME	-1
@@ -117,14 +117,14 @@
 /*
  * Miscellaneous configurable options
  */
-#define CFG_LONGHELP			/* undef to save memory		*/
-#define CFG_PROMPT	"=> "		/* Monitor Command Prompt	*/
-#define CFG_CBSIZE	256		/* Console I/O Buffer Size	*/
+#define CONFIG_SYS_LONGHELP			/* undef to save memory		*/
+#define CONFIG_SYS_PROMPT	"=> "		/* Monitor Command Prompt	*/
+#define CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size	*/
 
-#define CFG_PBSIZE	(CFG_CBSIZE + sizeof(CFG_PROMPT) + 16)
-#define CFG_MAXARGS	16		/* Max number of command args	*/
-#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size	*/
-#define CFG_LOAD_ADDR	0x00100000	/* Default load address			*/
+#define CONFIG_SYS_PBSIZE	(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
+#define CONFIG_SYS_MAXARGS	16		/* Max number of command args	*/
+#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
+#define CONFIG_SYS_LOAD_ADDR	0x00100000	/* Default load address			*/
 
 #define CONFIG_BOOTCOMMAND	"run nfsboot"
 #define CONFIG_BOOTARGS			"root=/dev/mtdblock5 ro rootfstype=jffs2"
@@ -168,54 +168,54 @@
 /*-----------------------------------------------------------------------
  * Start addresses for the final memory configuration
  * (Set up by the startup code)
- * Please note that CFG_SDRAM_BASE _must_ start at 0
+ * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
  */
-#define CFG_SDRAM_BASE	    0x00000000
+#define CONFIG_SYS_SDRAM_BASE	    0x00000000
 
-#define CFG_FLASH_BASE      0xFFF00000
-#define CFG_MONITOR_BASE    TEXT_BASE
+#define CONFIG_SYS_FLASH_BASE      0xFFF00000
+#define CONFIG_SYS_MONITOR_BASE    TEXT_BASE
 
-#define CFG_RESET_ADDRESS   0xFFF00100
-#define CFG_EUMB_ADDR	    0xFC000000
+#define CONFIG_SYS_RESET_ADDRESS   0xFFF00100
+#define CONFIG_SYS_EUMB_ADDR	    0xFC000000
 
-#define CFG_MONITOR_LEN     0x00100000
-#define CFG_MALLOC_LEN      (512 << 10) /* Reserve some kB for malloc()  */
+#define CONFIG_SYS_MONITOR_LEN     0x00100000
+#define CONFIG_SYS_MALLOC_LEN      (512 << 10) /* Reserve some kB for malloc()  */
 
-#define CFG_MEMTEST_START   0x00100000	/* memtest works on		*/
-#define CFG_MEMTEST_END	    0x00800000	/* 1M ... 8M in DRAM		*/
+#define CONFIG_SYS_MEMTEST_START   0x00100000	/* memtest works on		*/
+#define CONFIG_SYS_MEMTEST_END	    0x00800000	/* 1M ... 8M in DRAM		*/
 
 /* Maximum amount of RAM.  */
-#define CFG_MAX_RAM_SIZE    0x10000000	/* 0 .. 256MB of (S)DRAM */
+#define CONFIG_SYS_MAX_RAM_SIZE    0x10000000	/* 0 .. 256MB of (S)DRAM */
 
 
-#if CFG_MONITOR_BASE >= CFG_FLASH_BASE
-#undef CFG_RAMBOOT
+#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE
+#undef CONFIG_SYS_RAMBOOT
 #else
-#define CFG_RAMBOOT
+#define CONFIG_SYS_RAMBOOT
 #endif
 
-#define CFG_ISA_IO      0xFE000000
+#define CONFIG_SYS_ISA_IO      0xFE000000
 
 /*
  * serial configuration
  */
-#define CFG_NS16550
-#define CFG_NS16550_SERIAL
+#define CONFIG_SYS_NS16550
+#define CONFIG_SYS_NS16550_SERIAL
 
-#define CFG_NS16550_REG_SIZE    1
+#define CONFIG_SYS_NS16550_REG_SIZE    1
 
-#define CFG_NS16550_CLK     get_bus_freq(0)
+#define CONFIG_SYS_NS16550_CLK     get_bus_freq(0)
 
-#define CFG_NS16550_COM1    (CFG_EUMB_ADDR + 0x4500)
-#define CFG_NS16550_COM2    (CFG_EUMB_ADDR + 0x4600)
+#define CONFIG_SYS_NS16550_COM1    (CONFIG_SYS_EUMB_ADDR + 0x4500)
+#define CONFIG_SYS_NS16550_COM2    (CONFIG_SYS_EUMB_ADDR + 0x4600)
 
 /*-----------------------------------------------------------------------
  * Definitions for initial stack pointer and data area
  */
-#define CFG_INIT_RAM_ADDR     0x40000000
-#define CFG_INIT_RAM_END      0x1000
-#define CFG_GBL_DATA_SIZE     128
-#define CFG_GBL_DATA_OFFSET   (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_RAM_ADDR     0x40000000
+#define CONFIG_SYS_INIT_RAM_END      0x1000
+#define CONFIG_SYS_GBL_DATA_SIZE     128
+#define CONFIG_SYS_GBL_DATA_OFFSET   (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
 
 /*
  * Low Level Configuration Settings
@@ -225,35 +225,35 @@
  */
 
 #define CONFIG_SYS_CLK_FREQ  33000000
-#define CFG_HZ			 10000
+#define CONFIG_SYS_HZ			 10000
 
 /* Bit-field values for MCCR1.  */
-#define CFG_ROMNAL      7
-#define CFG_ROMFAL      11
+#define CONFIG_SYS_ROMNAL      7
+#define CONFIG_SYS_ROMFAL      11
 
 /* Bit-field values for MCCR2.  */
-#define CFG_TSWAIT      0x5
-#define CFG_REFINT      430
+#define CONFIG_SYS_TSWAIT      0x5
+#define CONFIG_SYS_REFINT      430
 
 /* Burst To Precharge. Bits of this value go to MCCR3 and MCCR4.  */
-#define CFG_BSTOPRE     121
+#define CONFIG_SYS_BSTOPRE     121
 
 /* Bit-field values for MCCR3.  */
-#define CFG_REFREC      8
+#define CONFIG_SYS_REFREC      8
 
 /* Bit-field values for MCCR4.  */
-#define CFG_PRETOACT    3
-#define CFG_ACTTOPRE    5
-#define CFG_ACTORW      3
-#define CFG_SDMODE_CAS_LAT  3
-#define CFG_REGISTERD_TYPE_BUFFER 1
-#define CFG_EXTROM      1
-#define CFG_REGDIMM     0
-#define CFG_DBUS_SIZE2  1
-#define CFG_SDMODE_WRAP 0
-
-#define CFG_PGMAX       0x32
-#define CFG_SDRAM_DSCD  0x20
+#define CONFIG_SYS_PRETOACT    3
+#define CONFIG_SYS_ACTTOPRE    5
+#define CONFIG_SYS_ACTORW      3
+#define CONFIG_SYS_SDMODE_CAS_LAT  3
+#define CONFIG_SYS_REGISTERD_TYPE_BUFFER 1
+#define CONFIG_SYS_EXTROM      1
+#define CONFIG_SYS_REGDIMM     0
+#define CONFIG_SYS_DBUS_SIZE2  1
+#define CONFIG_SYS_SDMODE_WRAP 0
+
+#define CONFIG_SYS_PGMAX       0x32
+#define CONFIG_SYS_SDRAM_DSCD  0x20
 
 /* Memory bank settings.
  * Only bits 20-29 are actually used from these vales to set the
@@ -262,84 +262,84 @@
  * address. Refer to the MPC8240 book.
  */
 
-#define CFG_BANK0_START	    0x00000000
-#define CFG_BANK0_END	    (CFG_MAX_RAM_SIZE - 1)
-#define CFG_BANK0_ENABLE    1
-#define CFG_BANK1_START     0x3ff00000
-#define CFG_BANK1_END       0x3fffffff
-#define CFG_BANK1_ENABLE    0
-#define CFG_BANK2_START     0x3ff00000
-#define CFG_BANK2_END       0x3fffffff
-#define CFG_BANK2_ENABLE    0
-#define CFG_BANK3_START     0x3ff00000
-#define CFG_BANK3_END       0x3fffffff
-#define CFG_BANK3_ENABLE    0
-#define CFG_BANK4_START     0x3ff00000
-#define CFG_BANK4_END       0x3fffffff
-#define CFG_BANK4_ENABLE    0
-#define CFG_BANK5_START     0x3ff00000
-#define CFG_BANK5_END       0x3fffffff
-#define CFG_BANK5_ENABLE    0
-#define CFG_BANK6_START     0x3ff00000
-#define CFG_BANK6_END       0x3fffffff
-#define CFG_BANK6_ENABLE    0
-#define CFG_BANK7_START     0x3ff00000
-#define CFG_BANK7_END       0x3fffffff
-#define CFG_BANK7_ENABLE    0
-
-#define CFG_ODCR	    0xff
-
-#define CFG_IBAT0L  (CFG_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
-#define CFG_IBAT0U  (CFG_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
-
-#define CFG_IBAT1L  (CFG_INIT_RAM_ADDR | BATL_PP_10 | BATL_MEMCOHERENCE)
-#define CFG_IBAT1U  (CFG_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP)
-
-#define CFG_IBAT2L  (0x80000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
-#define CFG_IBAT2U  (0x80000000 | BATU_BL_256M | BATU_VS | BATU_VP)
-
-#define CFG_IBAT3L  (0xF0000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
-#define CFG_IBAT3U  (0xF0000000 | BATU_BL_256M | BATU_VS | BATU_VP)
-
-#define CFG_DBAT0L  CFG_IBAT0L
-#define CFG_DBAT0U  CFG_IBAT0U
-#define CFG_DBAT1L  CFG_IBAT1L
-#define CFG_DBAT1U  CFG_IBAT1U
-#define CFG_DBAT2L  CFG_IBAT2L
-#define CFG_DBAT2U  CFG_IBAT2U
-#define CFG_DBAT3L  CFG_IBAT3L
-#define CFG_DBAT3U  CFG_IBAT3U
+#define CONFIG_SYS_BANK0_START	    0x00000000
+#define CONFIG_SYS_BANK0_END	    (CONFIG_SYS_MAX_RAM_SIZE - 1)
+#define CONFIG_SYS_BANK0_ENABLE    1
+#define CONFIG_SYS_BANK1_START     0x3ff00000
+#define CONFIG_SYS_BANK1_END       0x3fffffff
+#define CONFIG_SYS_BANK1_ENABLE    0
+#define CONFIG_SYS_BANK2_START     0x3ff00000
+#define CONFIG_SYS_BANK2_END       0x3fffffff
+#define CONFIG_SYS_BANK2_ENABLE    0
+#define CONFIG_SYS_BANK3_START     0x3ff00000
+#define CONFIG_SYS_BANK3_END       0x3fffffff
+#define CONFIG_SYS_BANK3_ENABLE    0
+#define CONFIG_SYS_BANK4_START     0x3ff00000
+#define CONFIG_SYS_BANK4_END       0x3fffffff
+#define CONFIG_SYS_BANK4_ENABLE    0
+#define CONFIG_SYS_BANK5_START     0x3ff00000
+#define CONFIG_SYS_BANK5_END       0x3fffffff
+#define CONFIG_SYS_BANK5_ENABLE    0
+#define CONFIG_SYS_BANK6_START     0x3ff00000
+#define CONFIG_SYS_BANK6_END       0x3fffffff
+#define CONFIG_SYS_BANK6_ENABLE    0
+#define CONFIG_SYS_BANK7_START     0x3ff00000
+#define CONFIG_SYS_BANK7_END       0x3fffffff
+#define CONFIG_SYS_BANK7_ENABLE    0
+
+#define CONFIG_SYS_ODCR	    0xff
+
+#define CONFIG_SYS_IBAT0L  (CONFIG_SYS_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
+#define CONFIG_SYS_IBAT0U  (CONFIG_SYS_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
+
+#define CONFIG_SYS_IBAT1L  (CONFIG_SYS_INIT_RAM_ADDR | BATL_PP_10 | BATL_MEMCOHERENCE)
+#define CONFIG_SYS_IBAT1U  (CONFIG_SYS_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP)
+
+#define CONFIG_SYS_IBAT2L  (0x80000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
+#define CONFIG_SYS_IBAT2U  (0x80000000 | BATU_BL_256M | BATU_VS | BATU_VP)
+
+#define CONFIG_SYS_IBAT3L  (0xF0000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
+#define CONFIG_SYS_IBAT3U  (0xF0000000 | BATU_BL_256M | BATU_VS | BATU_VP)
+
+#define CONFIG_SYS_DBAT0L  CONFIG_SYS_IBAT0L
+#define CONFIG_SYS_DBAT0U  CONFIG_SYS_IBAT0U
+#define CONFIG_SYS_DBAT1L  CONFIG_SYS_IBAT1L
+#define CONFIG_SYS_DBAT1U  CONFIG_SYS_IBAT1U
+#define CONFIG_SYS_DBAT2L  CONFIG_SYS_IBAT2L
+#define CONFIG_SYS_DBAT2U  CONFIG_SYS_IBAT2U
+#define CONFIG_SYS_DBAT3L  CONFIG_SYS_IBAT3L
+#define CONFIG_SYS_DBAT3U  CONFIG_SYS_IBAT3U
 
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define CFG_BOOTMAPSZ	    (8 << 20)	/* Initial Memory map for Linux */
+#define CONFIG_SYS_BOOTMAPSZ	    (8 << 20)	/* Initial Memory map for Linux */
 
 /*-----------------------------------------------------------------------
  * FLASH organization
  */
-#undef  CFG_FLASH_PROTECTION
-#define CFG_MAX_FLASH_BANKS		1	/* Max number of flash banks		*/
-#define CFG_MAX_FLASH_SECT		63	/* Max number of sectors per flash	*/
+#undef  CONFIG_SYS_FLASH_PROTECTION
+#define CONFIG_SYS_MAX_FLASH_BANKS		1	/* Max number of flash banks		*/
+#define CONFIG_SYS_MAX_FLASH_SECT		63	/* Max number of sectors per flash	*/
 
-#define CFG_FLASH_ERASE_TOUT	12000
-#define CFG_FLASH_WRITE_TOUT	1000
+#define CONFIG_SYS_FLASH_ERASE_TOUT	12000
+#define CONFIG_SYS_FLASH_WRITE_TOUT	1000
 
 
-#define CFG_ENV_IS_IN_FLASH
+#define CONFIG_ENV_IS_IN_FLASH
 
-#define CFG_ENV_OFFSET		0x00010000
-#define CFG_ENV_SIZE		0x00010000
-#define CFG_ENV_SECT_SIZE	0x00010000
+#define CONFIG_ENV_OFFSET		0x00010000
+#define CONFIG_ENV_SIZE		0x00010000
+#define CONFIG_ENV_SECT_SIZE	0x00010000
 
 /*-----------------------------------------------------------------------
  * Cache Configuration
  */
-#define CFG_CACHELINE_SIZE	32
+#define CONFIG_SYS_CACHELINE_SIZE	32
 #if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value	*/
+#define CONFIG_SYS_CACHELINE_SHIFT	5	/* log base 2 of the above value	*/
 #endif
 
 /*
diff --git a/include/configs/MVS1.h b/include/configs/MVS1.h
index 87458e362..b03612797 100644
--- a/include/configs/MVS1.h
+++ b/include/configs/MVS1.h
@@ -58,7 +58,7 @@
 	"bootm"
 
 #define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
-#undef	CFG_LOADS_BAUD_CHANGE		/* don't allow baudrate change	*/
+#undef	CONFIG_SYS_LOADS_BAUD_CHANGE		/* don't allow baudrate change	*/
 
 #define	CONFIG_WATCHDOG			/* watchdog disabled/enabled	*/
 
@@ -100,31 +100,31 @@
 /*
  * Miscellaneous configurable options
  */
-#undef	CFG_LONGHELP			/* undef to save memory		*/
-#define	CFG_PROMPT		"=> "	/* Monitor Command Prompt	*/
+#undef	CONFIG_SYS_LONGHELP			/* undef to save memory		*/
+#define	CONFIG_SYS_PROMPT		"=> "	/* Monitor Command Prompt	*/
 
-#undef	CFG_HUSH_PARSER			/* Hush parse for U-Boot ?? */
-#ifdef	CFG_HUSH_PARSER
-#define CFG_PROMPT_HUSH_PS2	"> "
+#undef	CONFIG_SYS_HUSH_PARSER			/* Hush parse for U-Boot ?? */
+#ifdef	CONFIG_SYS_HUSH_PARSER
+#define CONFIG_SYS_PROMPT_HUSH_PS2	"> "
 #endif
 
 #if defined(CONFIG_CMD_KGDB)
-#define	CFG_CBSIZE	1024		/* Console I/O Buffer Size	*/
+#define	CONFIG_SYS_CBSIZE	1024		/* Console I/O Buffer Size	*/
 #else
-#define	CFG_CBSIZE	256		/* Console I/O Buffer Size	*/
+#define	CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size	*/
 #endif
-#define	CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define	CFG_MAXARGS	16		/* max number of command args	*/
-#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+#define	CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define	CONFIG_SYS_MAXARGS	16		/* max number of command args	*/
+#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
 
-#define CFG_MEMTEST_START	0x0400000	/* memtest works on	*/
-#define CFG_MEMTEST_END		0x0C00000	/* 4 ... 12 MB in DRAM	*/
+#define CONFIG_SYS_MEMTEST_START	0x0400000	/* memtest works on	*/
+#define CONFIG_SYS_MEMTEST_END		0x0C00000	/* 4 ... 12 MB in DRAM	*/
 
-#define	CFG_LOAD_ADDR		0x100000	/* default load address	*/
+#define	CONFIG_SYS_LOAD_ADDR		0x100000	/* default load address	*/
 
-#define	CFG_HZ		1000		/* decrementer freq: 1 ms ticks	*/
+#define	CONFIG_SYS_HZ		1000		/* decrementer freq: 1 ms ticks	*/
 
-#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
 
 /*
  * Low Level Configuration Settings
@@ -134,58 +134,58 @@
 /*-----------------------------------------------------------------------
  * Internal Memory Mapped Register
  */
-#define CFG_IMMR		0xFFF00000
+#define CONFIG_SYS_IMMR		0xFFF00000
 
 /*-----------------------------------------------------------------------
  * Definitions for initial stack pointer and data area (in DPRAM)
  */
-#define CFG_INIT_RAM_ADDR	CFG_IMMR
-#define	CFG_INIT_RAM_END	0x2F00	/* End of used area in DPRAM	*/
-#define	CFG_GBL_DATA_SIZE	64  /* size in bytes reserved for initial data */
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define	CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_IMMR
+#define	CONFIG_SYS_INIT_RAM_END	0x2F00	/* End of used area in DPRAM	*/
+#define	CONFIG_SYS_GBL_DATA_SIZE	64  /* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define	CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
 /*-----------------------------------------------------------------------
  * Start addresses for the final memory configuration
  * (Set up by the startup code)
- * Please note that CFG_SDRAM_BASE _must_ start at 0
+ * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
  */
-#define	CFG_SDRAM_BASE		0x00000000
-#define CFG_FLASH_BASE		0x40000000
+#define	CONFIG_SYS_SDRAM_BASE		0x00000000
+#define CONFIG_SYS_FLASH_BASE		0x40000000
 
-#define	CFG_MONITOR_LEN		(128 << 10)	/* Reserve 192 kB for Monitor	*/
+#define	CONFIG_SYS_MONITOR_LEN		(128 << 10)	/* Reserve 192 kB for Monitor	*/
 
-#define CFG_MONITOR_BASE	CFG_FLASH_BASE
-#define	CFG_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/
+#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_FLASH_BASE
+#define	CONFIG_SYS_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/
 
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define	CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux	*/
+#define	CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux	*/
 
 /*-----------------------------------------------------------------------
  * FLASH organization
  */
-#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
-#define CFG_MAX_FLASH_SECT	71	/* max number of sectors on one chip (for AMD320DB chip)	*/
+#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
+#define CONFIG_SYS_MAX_FLASH_SECT	71	/* max number of sectors on one chip (for AMD320DB chip)	*/
 
-#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
-#define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
+#define CONFIG_SYS_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
+#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
 
-#define	CFG_ENV_IS_IN_FLASH	1
+#define	CONFIG_ENV_IS_IN_FLASH	1
 
 /* 4MB flash - use bottom sectors of a bottom boot sector flash (16 bit access) */
-#define	CFG_ENV_OFFSET		0x8000	/* Offset of Environment Sector	(bottom boot sector) */
-#define	CFG_ENV_SIZE		0x2000	/* Used Size of Environment Sector 8k	*/
+#define	CONFIG_ENV_OFFSET		0x8000	/* Offset of Environment Sector	(bottom boot sector) */
+#define	CONFIG_ENV_SIZE		0x2000	/* Used Size of Environment Sector 8k	*/
 
 /*-----------------------------------------------------------------------
  * Cache Configuration
  */
-#define CFG_CACHELINE_SIZE	16	/* For all MPC8xx CPUs			*/
+#define CONFIG_SYS_CACHELINE_SIZE	16	/* For all MPC8xx CPUs			*/
 #if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT	4	/* log base 2 of the above value	*/
+#define CONFIG_SYS_CACHELINE_SHIFT	4	/* log base 2 of the above value	*/
 #endif
 
 /*-----------------------------------------------------------------------
@@ -195,10 +195,10 @@
  * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze
  */
 #if defined(CONFIG_WATCHDOG)
-#define CFG_SYPCR   (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
+#define CONFIG_SYS_SYPCR   (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
 	     SYPCR_SWE	| SYPCR_SWRI| SYPCR_SWP)
 #else
-#define CFG_SYPCR   (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
+#define CONFIG_SYS_SYPCR   (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
 #endif
 
 /*-----------------------------------------------------------------------
@@ -206,27 +206,27 @@
  *-----------------------------------------------------------------------
  * PCMCIA config., multi-function pin tri-state
  */
-#define CFG_SIUMCR  (SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_MLRC01)
+#define CONFIG_SYS_SIUMCR  (SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_MLRC01)
 
 /*-----------------------------------------------------------------------
  * TBSCR - Time Base Status and Control				11-26
  *-----------------------------------------------------------------------
  * Clear Reference Interrupt Status, Timebase freezing enabled
  */
-#define CFG_TBSCR	(TBSCR_REFA | TBSCR_REFB | TBSCR_TBF)
+#define CONFIG_SYS_TBSCR	(TBSCR_REFA | TBSCR_REFB | TBSCR_TBF)
 
 /*-----------------------------------------------------------------------
  * RTCSC - Real-Time Clock Status and Control Register		11-27
  *-----------------------------------------------------------------------
  */
-#define CFG_RTCSC	(RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE)
+#define CONFIG_SYS_RTCSC	(RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE)
 
 /*-----------------------------------------------------------------------
  * PISCR - Periodic Interrupt Status and Control		11-31
  *-----------------------------------------------------------------------
  * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
  */
-#define CFG_PISCR	(PISCR_PS | PISCR_PITF)
+#define CONFIG_SYS_PISCR	(PISCR_PS | PISCR_PITF)
 
 /*-----------------------------------------------------------------------
  * PLPRCR - PLL, Low-Power, and Reset Control Register		15-30
@@ -235,7 +235,7 @@
  * interrupt status bit
  *
  */
-#define CFG_PLPRCR	(PLPRCR_SPLSS | PLPRCR_TEXPS | PLPRCR_TMIST)
+#define CONFIG_SYS_PLPRCR	(PLPRCR_SPLSS | PLPRCR_TEXPS | PLPRCR_TMIST)
 
 /*-----------------------------------------------------------------------
  * SCCR - System Clock and reset Control Register		15-27
@@ -244,7 +244,7 @@
  * power management and some other internal clocks
  */
 #define SCCR_MASK	SCCR_EBDF11
-#define CFG_SCCR	(SCCR_TBS     | \
+#define CONFIG_SYS_SCCR	(SCCR_TBS     | \
 			 SCCR_COM00   | SCCR_DFSYNC00 | SCCR_DFBRG00  | \
 			 SCCR_DFNL000 | SCCR_DFNH000  | SCCR_DFLCD000 | \
 			 SCCR_DFALCD00)
@@ -254,14 +254,14 @@
  *-----------------------------------------------------------------------
  *
  */
-#define CFG_PCMCIA_MEM_ADDR	(0xE0000000)
-#define CFG_PCMCIA_MEM_SIZE	( 64 << 20 )
-#define CFG_PCMCIA_DMA_ADDR	(0xE4000000)
-#define CFG_PCMCIA_DMA_SIZE	( 64 << 20 )
-#define CFG_PCMCIA_ATTRB_ADDR	(0xE8000000)
-#define CFG_PCMCIA_ATTRB_SIZE	( 64 << 20 )
-#define CFG_PCMCIA_IO_ADDR	(0xEC000000)
-#define CFG_PCMCIA_IO_SIZE	( 64 << 20 )
+#define CONFIG_SYS_PCMCIA_MEM_ADDR	(0xE0000000)
+#define CONFIG_SYS_PCMCIA_MEM_SIZE	( 64 << 20 )
+#define CONFIG_SYS_PCMCIA_DMA_ADDR	(0xE4000000)
+#define CONFIG_SYS_PCMCIA_DMA_SIZE	( 64 << 20 )
+#define CONFIG_SYS_PCMCIA_ATTRB_ADDR	(0xE8000000)
+#define CONFIG_SYS_PCMCIA_ATTRB_SIZE	( 64 << 20 )
+#define CONFIG_SYS_PCMCIA_IO_ADDR	(0xEC000000)
+#define CONFIG_SYS_PCMCIA_IO_SIZE	( 64 << 20 )
 
 /*-----------------------------------------------------------------------
  * IDE/ATA stuff (Supports IDE harddisk on PCMCIA Adapter)
@@ -274,30 +274,30 @@
 #undef	CONFIG_IDE_LED			/* LED	 for ide not supported	*/
 #undef	CONFIG_IDE_RESET		/* reset for ide not supported	*/
 
-#define CFG_IDE_MAXBUS		0	/* max. no. of IDE buses			*/
-#define CFG_IDE_MAXDEVICE	0	/* max. no. of drives per IDE bus	*/
+#define CONFIG_SYS_IDE_MAXBUS		0	/* max. no. of IDE buses			*/
+#define CONFIG_SYS_IDE_MAXDEVICE	0	/* max. no. of drives per IDE bus	*/
 
 
-#define CFG_ATA_IDE0_OFFSET	0x0000
+#define CONFIG_SYS_ATA_IDE0_OFFSET	0x0000
 
-#define CFG_ATA_BASE_ADDR	CFG_PCMCIA_MEM_ADDR
+#define CONFIG_SYS_ATA_BASE_ADDR	CONFIG_SYS_PCMCIA_MEM_ADDR
 
 /* Offset for data I/O			*/
-#define CFG_ATA_DATA_OFFSET	(CFG_PCMCIA_MEM_SIZE + 0x320)
+#define CONFIG_SYS_ATA_DATA_OFFSET	(CONFIG_SYS_PCMCIA_MEM_SIZE + 0x320)
 
 /* Offset for normal register accesses	*/
-#define CFG_ATA_REG_OFFSET	(2 * CFG_PCMCIA_MEM_SIZE + 0x320)
+#define CONFIG_SYS_ATA_REG_OFFSET	(2 * CONFIG_SYS_PCMCIA_MEM_SIZE + 0x320)
 
 /* Offset for alternate registers	*/
-#define CFG_ATA_ALT_OFFSET	0x0100
+#define CONFIG_SYS_ATA_ALT_OFFSET	0x0100
 
 /*-----------------------------------------------------------------------
  *
  *-----------------------------------------------------------------------
  *
  */
-/*#define	CFG_DER	0x2002000F*/
-#define CFG_DER	0
+/*#define	CONFIG_SYS_DER	0x2002000F*/
+#define CONFIG_SYS_DER	0
 
 /*
  * Init Memory Controller:
@@ -312,33 +312,33 @@
  * restrict access enough to keep SRAM working (if any)
  * but not too much to meddle with FLASH accesses
  */
-#define CFG_REMAP_OR_AM		0x80000000	/* OR addr mask */
-#define CFG_PRELIM_OR_AM	0xE0000000	/* OR addr mask */
+#define CONFIG_SYS_REMAP_OR_AM		0x80000000	/* OR addr mask */
+#define CONFIG_SYS_PRELIM_OR_AM	0xE0000000	/* OR addr mask */
 
 
 /*
  * FLASH timing:
  */
 /* 50 MHz CPU - 50 MHz bus: ACS = 00, TRLX = 1, CSNT = 1, SCY = 2, EHTR = 1 */
-#define CFG_OR_TIMING_FLASH	(OR_ACS_DIV1  | OR_TRLX | OR_CSNT_SAM | \
+#define CONFIG_SYS_OR_TIMING_FLASH	(OR_ACS_DIV1  | OR_TRLX | OR_CSNT_SAM | \
 				 OR_SCY_2_CLK | OR_EHTR | OR_BI)
 /* FLASH timing: ACS = 11, TRLX = 0, CSNT = 1, SCY = 5, EHTR = 1	*/
 /*
-#define CFG_OR_TIMING_FLASH	(OR_CSNT_SAM  | OR_ACS_DIV2 | OR_BI | \
+#define CONFIG_SYS_OR_TIMING_FLASH	(OR_CSNT_SAM  | OR_ACS_DIV2 | OR_BI | \
 				 OR_SCY_5_CLK | OR_EHTR)
 */
 
-#define CFG_OR0_REMAP	(CFG_REMAP_OR_AM  | CFG_OR_TIMING_FLASH)
-#define CFG_OR0_PRELIM	(CFG_PRELIM_OR_AM | CFG_OR_TIMING_FLASH)
+#define CONFIG_SYS_OR0_REMAP	(CONFIG_SYS_REMAP_OR_AM  | CONFIG_SYS_OR_TIMING_FLASH)
+#define CONFIG_SYS_OR0_PRELIM	(CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_FLASH)
 #ifdef CONFIG_MVS_16BIT_FLASH
-#define CFG_BR0_PRELIM	((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_PS_16 | BR_V )
+#define CONFIG_SYS_BR0_PRELIM	((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_PS_16 | BR_V )
 #else
-#define CFG_BR0_PRELIM	((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_PS_32 | BR_V )
+#define CONFIG_SYS_BR0_PRELIM	((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_PS_32 | BR_V )
 #endif
 
-#undef CFG_OR1_REMAP
-#undef CFG_OR1_PRELIM
-#undef CFG_BR1_PRELIM
+#undef CONFIG_SYS_OR1_REMAP
+#undef CONFIG_SYS_OR1_PRELIM
+#undef CONFIG_SYS_BR1_PRELIM
 /*
  * BR2/3 and OR2/3 (SDRAM)
  *
@@ -348,13 +348,13 @@
 #define	SDRAM_MAX_SIZE		0x04000000	/* max 64 MB per bank	*/
 
 /* SDRAM timing: Multiplexed addresses, GPL5 output to GPL5_A (don't care)	*/
-#define CFG_OR_TIMING_SDRAM	0x00000A00
+#define CONFIG_SYS_OR_TIMING_SDRAM	0x00000A00
 
-#define CFG_OR2_PRELIM	(CFG_PRELIM_OR_AM | CFG_OR_TIMING_SDRAM )
-#define CFG_BR2_PRELIM	((SDRAM_BASE2_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
+#define CONFIG_SYS_OR2_PRELIM	(CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_SDRAM )
+#define CONFIG_SYS_BR2_PRELIM	((SDRAM_BASE2_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
 
-#undef CFG_OR3_PRELIM
-#undef CFG_BR3_PRELIM
+#undef CONFIG_SYS_OR3_PRELIM
+#undef CONFIG_SYS_BR3_PRELIM
 
 
 /*
@@ -383,26 +383,26 @@
  * 66 Mhz => 66.000.000 / Divider = 129
  * 80 Mhz => 80.000.000 / Divider = 156
  */
-#define CFG_MAMR_PTA		 98
+#define CONFIG_SYS_MAMR_PTA		 98
 
 /* refresh rate 15.6 us (= 64 ms / 4K = 62.4 / quad bursts) for <= 128 MBit	*/
-#define CFG_MPTPR_2BK_4K	MPTPR_PTP_DIV16		/* setting for 2 banks	*/
-#define CFG_MPTPR_1BK_4K	MPTPR_PTP_DIV32		/* setting for 1 bank	*/
+#define CONFIG_SYS_MPTPR_2BK_4K	MPTPR_PTP_DIV16		/* setting for 2 banks	*/
+#define CONFIG_SYS_MPTPR_1BK_4K	MPTPR_PTP_DIV32		/* setting for 1 bank	*/
 
 /* refresh rate 7.8 us (= 64 ms / 8K = 31.2 / quad bursts) for 256 MBit		*/
-#define CFG_MPTPR_2BK_8K	MPTPR_PTP_DIV8		/* setting for 2 banks	*/
-#define CFG_MPTPR_1BK_8K	MPTPR_PTP_DIV16		/* setting for 1 bank	*/
+#define CONFIG_SYS_MPTPR_2BK_8K	MPTPR_PTP_DIV8		/* setting for 2 banks	*/
+#define CONFIG_SYS_MPTPR_1BK_8K	MPTPR_PTP_DIV16		/* setting for 1 bank	*/
 
 /*
  * MAMR settings for SDRAM
  */
 
 /* 8 column SDRAM */
-#define CFG_MAMR_8COL	((CFG_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
+#define CONFIG_SYS_MAMR_8COL	((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
 			 MAMR_AMA_TYPE_0 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A11 |	\
 			 MAMR_RLFA_1X	 | MAMR_WLFA_1X	   | MAMR_TLFA_4X)
 /* 9 column SDRAM */
-#define CFG_MAMR_9COL	((CFG_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
+#define CONFIG_SYS_MAMR_9COL	((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
 			 MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A7 |	\
 			 MAMR_RLFA_1X	 | MAMR_WLFA_1X	   | MAMR_TLFA_4X)
 
diff --git a/include/configs/MigoR.h b/include/configs/MigoR.h
index 40cf27578..e171f76b5 100644
--- a/include/configs/MigoR.h
+++ b/include/configs/MigoR.h
@@ -58,90 +58,90 @@
 #define MIGO_R_FLASH_BASE_1	(0xA0000000)
 #define MIGO_R_FLASH_BANK_SIZE	(64 * 1024 * 1024)
 
-#define CFG_LONGHELP			/* undef to save memory	*/
-#define CFG_PROMPT		"=> "	/* Monitor Command Prompt */
-#define CFG_CBSIZE		256		/* Buffer size for input from the Console */
-#define CFG_PBSIZE		256		/* Buffer size for Console output */
-#define CFG_MAXARGS		16		/* max args accepted for monitor commands */
-#define CFG_BARGSIZE	512		/* Buffer size for Boot Arguments passed to kernel */
-#define CFG_BAUDRATE_TABLE	{ 115200 }	/* List of legal baudrate settings for this board */
+#define CONFIG_SYS_LONGHELP			/* undef to save memory	*/
+#define CONFIG_SYS_PROMPT		"=> "	/* Monitor Command Prompt */
+#define CONFIG_SYS_CBSIZE		256		/* Buffer size for input from the Console */
+#define CONFIG_SYS_PBSIZE		256		/* Buffer size for Console output */
+#define CONFIG_SYS_MAXARGS		16		/* max args accepted for monitor commands */
+#define CONFIG_SYS_BARGSIZE	512		/* Buffer size for Boot Arguments passed to kernel */
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 115200 }	/* List of legal baudrate settings for this board */
 
 /* SCIF */
 #define CONFIG_SCIF_CONSOLE	1
 #define CONFIG_CONS_SCIF0	1
-#undef  CFG_CONSOLE_INFO_QUIET	/* Suppress display of console
+#undef  CONFIG_SYS_CONSOLE_INFO_QUIET	/* Suppress display of console
 								   information at boot */
-#undef  CFG_CONSOLE_OVERWRITE_ROUTINE
-#undef  CFG_CONSOLE_ENV_OVERWRITE
+#undef  CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
+#undef  CONFIG_SYS_CONSOLE_ENV_OVERWRITE
 
-#define CFG_MEMTEST_START	(MIGO_R_SDRAM_BASE)
-#define CFG_MEMTEST_END		(CFG_MEMTEST_START + (60 * 1024 * 1024))
+#define CONFIG_SYS_MEMTEST_START	(MIGO_R_SDRAM_BASE)
+#define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_MEMTEST_START + (60 * 1024 * 1024))
 
 /* Enable alternate, more extensive, memory test */
-#undef  CFG_ALT_MEMTEST
+#undef  CONFIG_SYS_ALT_MEMTEST
 /* Scratch address used by the alternate memory test */
-#undef  CFG_MEMTEST_SCRATCH
+#undef  CONFIG_SYS_MEMTEST_SCRATCH
 
 /* Enable temporary baudrate change while serial download */
-#undef  CFG_LOADS_BAUD_CHANGE
+#undef  CONFIG_SYS_LOADS_BAUD_CHANGE
 
-#define CFG_SDRAM_BASE	(MIGO_R_SDRAM_BASE)
+#define CONFIG_SYS_SDRAM_BASE	(MIGO_R_SDRAM_BASE)
 /* maybe more, but if so u-boot doesn't know about it... */
-#define CFG_SDRAM_SIZE	(64 * 1024 * 1024)
+#define CONFIG_SYS_SDRAM_SIZE	(64 * 1024 * 1024)
 /* default load address for scripts ?!? */
-#define CFG_LOAD_ADDR	(CFG_SDRAM_BASE + 16 * 1024 * 1024)
+#define CONFIG_SYS_LOAD_ADDR	(CONFIG_SYS_SDRAM_BASE + 16 * 1024 * 1024)
 
 /* Address of u-boot image in Flash (NOT run time address in SDRAM) ?!? */
-#define CFG_MONITOR_BASE	(MIGO_R_FLASH_BASE_1)
+#define CONFIG_SYS_MONITOR_BASE	(MIGO_R_FLASH_BASE_1)
 /* Monitor size */
-#define CFG_MONITOR_LEN	(128 * 1024)
+#define CONFIG_SYS_MONITOR_LEN	(128 * 1024)
 /* Size of DRAM reserved for malloc() use */
-#define CFG_MALLOC_LEN	(256 * 1024)
+#define CONFIG_SYS_MALLOC_LEN	(256 * 1024)
 /* size in bytes reserved for initial data */
-#define CFG_GBL_DATA_SIZE	(256)
-#define CFG_BOOTMAPSZ	(8 * 1024 * 1024)
+#define CONFIG_SYS_GBL_DATA_SIZE	(256)
+#define CONFIG_SYS_BOOTMAPSZ	(8 * 1024 * 1024)
 
 /* FLASH */
-#define CFG_FLASH_CFI
+#define CONFIG_SYS_FLASH_CFI
 #define CONFIG_FLASH_CFI_DRIVER
-#undef  CFG_FLASH_QUIET_TEST
+#undef  CONFIG_SYS_FLASH_QUIET_TEST
 /* print 'E' for empty sector on flinfo */
-#define CFG_FLASH_EMPTY_INFO
+#define CONFIG_SYS_FLASH_EMPTY_INFO
 /* Physical start address of Flash memory */
-#define CFG_FLASH_BASE	(MIGO_R_FLASH_BASE_1)
+#define CONFIG_SYS_FLASH_BASE	(MIGO_R_FLASH_BASE_1)
 /* Max number of sectors on each Flash chip */
-#define CFG_MAX_FLASH_SECT	512
+#define CONFIG_SYS_MAX_FLASH_SECT	512
 
 /* if you use all NOR Flash , you change dip-switch. Please see MIGO_R01 Manual. */
-#define CFG_MAX_FLASH_BANKS	1
-#define CFG_FLASH_BANKS_LIST	{ CFG_FLASH_BASE + (0 * MIGO_R_FLASH_BANK_SIZE) }
+#define CONFIG_SYS_MAX_FLASH_BANKS	1
+#define CONFIG_SYS_FLASH_BANKS_LIST	{ CONFIG_SYS_FLASH_BASE + (0 * MIGO_R_FLASH_BANK_SIZE) }
 
 /* Timeout for Flash erase operations (in ms) */
-#define CFG_FLASH_ERASE_TOUT	(3 * 1000)
+#define CONFIG_SYS_FLASH_ERASE_TOUT	(3 * 1000)
 /* Timeout for Flash write operations (in ms) */
-#define CFG_FLASH_WRITE_TOUT	(3 * 1000)
+#define CONFIG_SYS_FLASH_WRITE_TOUT	(3 * 1000)
 /* Timeout for Flash set sector lock bit operations (in ms) */
-#define CFG_FLASH_LOCK_TOUT	(3 * 1000)
+#define CONFIG_SYS_FLASH_LOCK_TOUT	(3 * 1000)
 /* Timeout for Flash clear lock bit operations (in ms) */
-#define CFG_FLASH_UNLOCK_TOUT	(3 * 1000)
+#define CONFIG_SYS_FLASH_UNLOCK_TOUT	(3 * 1000)
 
 /* Use hardware flash sectors protection instead of U-Boot software protection */
-#undef  CFG_FLASH_PROTECTION
-#undef  CFG_DIRECT_FLASH_TFTP
+#undef  CONFIG_SYS_FLASH_PROTECTION
+#undef  CONFIG_SYS_DIRECT_FLASH_TFTP
 
 /* ENV setting */
-#define CFG_ENV_IS_IN_FLASH
+#define CONFIG_ENV_IS_IN_FLASH
 #define CONFIG_ENV_OVERWRITE	1
-#define CFG_ENV_SECT_SIZE	(128 * 1024)
-#define CFG_ENV_SIZE		(CFG_ENV_SECT_SIZE)
-#define CFG_ENV_ADDR		(CFG_FLASH_BASE + CFG_MONITOR_LEN)
-/* Offset of env Flash sector relative to CFG_FLASH_BASE */
-#define CFG_ENV_OFFSET		(CFG_ENV_ADDR - CFG_FLASH_BASE)
-#define CFG_ENV_SIZE_REDUND	(CFG_ENV_SECT_SIZE)
+#define CONFIG_ENV_SECT_SIZE	(128 * 1024)
+#define CONFIG_ENV_SIZE		(CONFIG_ENV_SECT_SIZE)
+#define CONFIG_ENV_ADDR		(CONFIG_SYS_FLASH_BASE + CONFIG_SYS_MONITOR_LEN)
+/* Offset of env Flash sector relative to CONFIG_SYS_FLASH_BASE */
+#define CONFIG_ENV_OFFSET		(CONFIG_ENV_ADDR - CONFIG_SYS_FLASH_BASE)
+#define CONFIG_ENV_SIZE_REDUND	(CONFIG_ENV_SECT_SIZE)
 
 /* Board Clock */
 #define CONFIG_SYS_CLK_FREQ	33333333
 #define TMU_CLK_DIVIDER		(4)	/* 4 (default), 16, 64, 256 or 1024 */
-#define CFG_HZ			(CONFIG_SYS_CLK_FREQ / TMU_CLK_DIVIDER)
+#define CONFIG_SYS_HZ			(CONFIG_SYS_CLK_FREQ / TMU_CLK_DIVIDER)
 
 #endif	/* __MIGO_R_H */
diff --git a/include/configs/NC650.h b/include/configs/NC650.h
index 84c6e9b61..423ca71c8 100644
--- a/include/configs/NC650.h
+++ b/include/configs/NC650.h
@@ -55,15 +55,15 @@
 /*
  * 15 MHz - CPU minimum clock
  */
-#define CFG_8xx_CPUCLK_MIN		15000000
+#define CONFIG_SYS_8xx_CPUCLK_MIN		15000000
 
 /*
  * 133 MHz - CPU maximum clock
  */
-#define CFG_8xx_CPUCLK_MAX		133000000
+#define CONFIG_SYS_8xx_CPUCLK_MAX		133000000
 
-#define CFG_MEASURE_CPUCLK
-#define CFG_8XX_XIN			CONFIG_8xx_OSCLK
+#define CONFIG_SYS_MEASURE_CPUCLK
+#define CONFIG_SYS_8XX_XIN			CONFIG_8xx_OSCLK
 
 #define CONFIG_BOOTDELAY		5	/* autoboot after 5 seconds	*/
 #define CONFIG_AUTOBOOT_KEYED
@@ -99,14 +99,14 @@
 #define	CONFIG_FEC_ENET		1	/* use FEC ethernet  */
 #define FEC_ENET
 #define CONFIG_MII
-#define CFG_DISCOVER_PHY	1
+#define CONFIG_SYS_DISCOVER_PHY	1
 
 
 /* enable I2C and select the hardware/software driver */
 #undef  CONFIG_HARD_I2C			/* I2C with hardware support	*/
 #define CONFIG_SOFT_I2C		1	/* I2C bit-banged		*/
-#define CFG_I2C_SPEED		100000	/* 100 kHz			*/
-#define CFG_I2C_SLAVE		0x7f
+#define CONFIG_SYS_I2C_SPEED		100000	/* 100 kHz			*/
+#define CONFIG_SYS_I2C_SLAVE		0x7f
 
 /*
  * Software (bit-bang) I2C driver configuration
@@ -141,7 +141,7 @@
 #define	I2C_TRISTATE	{ __I2C_DIR &= ~SDA; }
 
 #define CONFIG_RTC_PCF8563
-#define CFG_I2C_RTC_ADDR		0x51
+#define CONFIG_SYS_I2C_RTC_ADDR		0x51
 
 
 /*
@@ -162,25 +162,25 @@
 /*
  * Miscellaneous configurable options
  */
-#define	CFG_LONGHELP			/* undef to save memory		*/
-#define	CFG_PROMPT	"=> "		/* Monitor Command Prompt	*/
+#define	CONFIG_SYS_LONGHELP			/* undef to save memory		*/
+#define	CONFIG_SYS_PROMPT	"=> "		/* Monitor Command Prompt	*/
 #if defined(CONFIG_CMD_KGDB)
-#define	CFG_CBSIZE	1024		/* Console I/O Buffer Size	*/
+#define	CONFIG_SYS_CBSIZE	1024		/* Console I/O Buffer Size	*/
 #else
-#define	CFG_CBSIZE	256		/* Console I/O Buffer Size	*/
+#define	CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size	*/
 #endif
-#define	CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define	CFG_MAXARGS	16		/* max number of command args	*/
-#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+#define	CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define	CONFIG_SYS_MAXARGS	16		/* max number of command args	*/
+#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
 
-#define CFG_MEMTEST_START	0x0100000	/* memtest works on	*/
-#define CFG_MEMTEST_END		0x0400000	/* 1 ... 4 MB in DRAM	*/
+#define CONFIG_SYS_MEMTEST_START	0x0100000	/* memtest works on	*/
+#define CONFIG_SYS_MEMTEST_END		0x0400000	/* 1 ... 4 MB in DRAM	*/
 
-#define CFG_LOAD_ADDR		0x00100000
+#define CONFIG_SYS_LOAD_ADDR		0x00100000
 
-#define	CFG_HZ		1000		/* decrementer freq: 1 ms ticks	*/
+#define	CONFIG_SYS_HZ		1000		/* decrementer freq: 1 ms ticks	*/
 
-#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
 
 /*
  * Low Level Configuration Settings
@@ -190,66 +190,66 @@
 /*-----------------------------------------------------------------------
  * Internal Memory Mapped Register
  */
-#define CFG_IMMR		0xF0000000
-#define CFG_IMMR_SIZE		((uint)(64 * 1024))
+#define CONFIG_SYS_IMMR		0xF0000000
+#define CONFIG_SYS_IMMR_SIZE		((uint)(64 * 1024))
 
 /*-----------------------------------------------------------------------
  * Definitions for initial stack pointer and data area (in DPRAM)
  */
-#define CFG_INIT_RAM_ADDR	CFG_IMMR
-#define	CFG_INIT_RAM_END	0x2F00	/* End of used area in DPRAM	*/
-#define	CFG_GBL_DATA_SIZE	64  /* size in bytes reserved for initial data */
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define	CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_IMMR
+#define	CONFIG_SYS_INIT_RAM_END	0x2F00	/* End of used area in DPRAM	*/
+#define	CONFIG_SYS_GBL_DATA_SIZE	64  /* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define	CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
 /*-----------------------------------------------------------------------
  * Start addresses for the final memory configuration
  * (Set up by the startup code)
- * Please note that CFG_SDRAM_BASE _must_ start at 0
+ * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
  */
-#define	CFG_SDRAM_BASE		0x00000000
-#define CFG_FLASH_BASE		0x40000000
+#define	CONFIG_SYS_SDRAM_BASE		0x00000000
+#define CONFIG_SYS_FLASH_BASE		0x40000000
 
-#define CFG_RESET_ADDRESS	0xFFF00100
+#define CONFIG_SYS_RESET_ADDRESS	0xFFF00100
 
-#define CFG_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor */
-#define CFG_MONITOR_BASE	TEXT_BASE
-#define	CFG_MALLOC_LEN		(256 << 10)	/* Reserve 256 kB for malloc()	*/
+#define CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor */
+#define CONFIG_SYS_MONITOR_BASE	TEXT_BASE
+#define	CONFIG_SYS_MALLOC_LEN		(256 << 10)	/* Reserve 256 kB for malloc()	*/
 
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define	CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux	*/
+#define	CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux	*/
 /*-----------------------------------------------------------------------
  * FLASH organization
  */
-#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
-#define CFG_MAX_FLASH_SECT	64	/* max number of sectors on one chip	*/
+#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
+#define CONFIG_SYS_MAX_FLASH_SECT	64	/* max number of sectors on one chip	*/
 
-#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
-#define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
+#define CONFIG_SYS_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
+#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
 
 
-#define	CFG_ENV_IS_IN_FLASH	1
-#define CFG_ENV_OFFSET		0x00740000
+#define	CONFIG_ENV_IS_IN_FLASH	1
+#define CONFIG_ENV_OFFSET		0x00740000
 
-#define CFG_ENV_SECT_SIZE	0x20000	/* Total Size of Environment sector	*/
-#define	CFG_ENV_SIZE		0x4000	/* Used Size of Environment Sector	*/
+#define CONFIG_ENV_SECT_SIZE	0x20000	/* Total Size of Environment sector	*/
+#define	CONFIG_ENV_SIZE		0x4000	/* Used Size of Environment Sector	*/
 
 /*-----------------------------------------------------------------------
  * Cache Configuration
  */
-#define CFG_CACHELINE_SIZE	16	/* For all MPC8xx CPUs			*/
+#define CONFIG_SYS_CACHELINE_SIZE	16	/* For all MPC8xx CPUs			*/
 #if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT	4	/* log base 2 of the above value	*/
+#define CONFIG_SYS_CACHELINE_SHIFT	4	/* log base 2 of the above value	*/
 #endif
 
 /*
  * NAND flash support
  */
-#define CFG_MAX_NAND_DEVICE	1
+#define CONFIG_SYS_MAX_NAND_DEVICE	1
 #define NAND_MAX_CHIPS		1
 
 /*-----------------------------------------------------------------------
@@ -259,31 +259,31 @@
  * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze
  */
 #if defined(CONFIG_WATCHDOG)
-#define CFG_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
+#define CONFIG_SYS_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
 			 SYPCR_SWE  | SYPCR_SWRI| SYPCR_SWP)
 #else
-#define CFG_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
+#define CONFIG_SYS_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
 #endif
 
 /*-----------------------------------------------------------------------
  * SIUMCR - SIU Module Configuration					11-6
  *-----------------------------------------------------------------------
  */
-#define CFG_SIUMCR	(SIUMCR_DBGC11 | SIUMCR_DBPC00 | SIUMCR_MLRC01)
+#define CONFIG_SYS_SIUMCR	(SIUMCR_DBGC11 | SIUMCR_DBPC00 | SIUMCR_MLRC01)
 
 /*-----------------------------------------------------------------------
  * TBSCR - Time Base Status and Control					11-26
  *-----------------------------------------------------------------------
  * Clear Reference Interrupt Status, Timebase freezing enabled
  */
-#define CFG_TBSCR	(TBSCR_REFA | TBSCR_REFB | TBSCR_TBE)
+#define CONFIG_SYS_TBSCR	(TBSCR_REFA | TBSCR_REFB | TBSCR_TBE)
 
 /*-----------------------------------------------------------------------
  * PISCR - Periodic Interrupt Status and Control		11-31
  *-----------------------------------------------------------------------
  * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
  */
-#define CFG_PISCR	(PISCR_PS | PISCR_PITF)
+#define CONFIG_SYS_PISCR	(PISCR_PS | PISCR_PITF)
 
 /*-----------------------------------------------------------------------
  * SCCR - System Clock and reset Control Register		15-27
@@ -292,7 +292,7 @@
  * power management and some other internal clocks
  */
 #define SCCR_MASK	SCCR_EBDF11
-#define CFG_SCCR	(SCCR_COM00	| SCCR_DFSYNC00	| \
+#define CONFIG_SYS_SCCR	(SCCR_COM00	| SCCR_DFSYNC00	| \
 			 SCCR_DFBRG00	| SCCR_DFNL000	| SCCR_DFNH000	| \
 			 SCCR_DFLCD000	| SCCR_DFALCD00)
 
@@ -301,7 +301,7 @@
  *-----------------------------------------------------------------------
  *
  */
-#define CFG_DER		0
+#define CONFIG_SYS_DER		0
 
 /*
  * Init Memory Controller:
@@ -311,29 +311,29 @@
 
 #define FLASH_BASE0_PRELIM	0x40000000	/* FLASH bank #0	*/
 
-#define CFG_REMAP_OR_AM		0x80000000	/* OR addr mask */
-#define CFG_PRELIM_OR_AM	0xE0000000	/* OR addr mask */
+#define CONFIG_SYS_REMAP_OR_AM		0x80000000	/* OR addr mask */
+#define CONFIG_SYS_PRELIM_OR_AM	0xE0000000	/* OR addr mask */
 
 /* FLASH timing: Default value of OR0 after reset */
-#define CFG_OR_TIMING_FLASH	(OR_CSNT_SAM  | OR_ACS_MSK | OR_BI | \
+#define CONFIG_SYS_OR_TIMING_FLASH	(OR_CSNT_SAM  | OR_ACS_MSK | OR_BI | \
 				 OR_SCY_15_CLK | OR_TRLX)
 
-#define CFG_OR0_REMAP	(CFG_REMAP_OR_AM  | CFG_OR_TIMING_FLASH)
-#define CFG_OR0_PRELIM	(CFG_PRELIM_OR_AM | CFG_OR_TIMING_FLASH)
-#define CFG_BR0_PRELIM	((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_PS_8 | BR_V)
+#define CONFIG_SYS_OR0_REMAP	(CONFIG_SYS_REMAP_OR_AM  | CONFIG_SYS_OR_TIMING_FLASH)
+#define CONFIG_SYS_OR0_PRELIM	(CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_FLASH)
+#define CONFIG_SYS_BR0_PRELIM	((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_PS_8 | BR_V)
 
 /*
  * BR2 and OR2 (NAND Flash) - addressed through UPMB on rev 1
  * rev2 only uses the chipselect
  */
-#define CFG_NAND_BASE		0x50000000
-#define CFG_NAND_SIZE		0x04000000
+#define CONFIG_SYS_NAND_BASE		0x50000000
+#define CONFIG_SYS_NAND_SIZE		0x04000000
 
-#define CFG_OR_TIMING_NAND	(OR_CSNT_SAM | OR_ACS_DIV1 | OR_BI | \
+#define CONFIG_SYS_OR_TIMING_NAND	(OR_CSNT_SAM | OR_ACS_DIV1 | OR_BI | \
 				 OR_SCY_15_CLK | OR_EHTR | OR_TRLX)
 
-#define CFG_BR2_PRELIM  ((CFG_NAND_BASE & BR_BA_MSK) | BR_PS_8 | BR_MS_UPMB | BR_V  )
-#define CFG_OR2_PRELIM  (((-CFG_NAND_SIZE) & OR_AM_MSK) | OR_BI )
+#define CONFIG_SYS_BR2_PRELIM  ((CONFIG_SYS_NAND_BASE & BR_BA_MSK) | BR_PS_8 | BR_MS_UPMB | BR_V  )
+#define CONFIG_SYS_OR2_PRELIM  (((-CONFIG_SYS_NAND_SIZE) & OR_AM_MSK) | OR_BI )
 
 /*
  * BR3 and OR3 (SDRAM)
@@ -344,41 +344,41 @@
  /*
   * SDRAM timing: Multiplexed addresses, GPL5 output to GPL5_A (don't care)
   */
-#define CFG_OR_TIMING_SDRAM	0x00000A00
+#define CONFIG_SYS_OR_TIMING_SDRAM	0x00000A00
 
-#define CFG_OR3_PRELIM	(CFG_PRELIM_OR_AM | CFG_OR_TIMING_SDRAM)
-#define CFG_BR3_PRELIM	((SDRAM_BASE3_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V)
+#define CONFIG_SYS_OR3_PRELIM	(CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_SDRAM)
+#define CONFIG_SYS_BR3_PRELIM	((SDRAM_BASE3_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V)
 
 /*
  * BR4 and OR4 (CPLD)
  */
-#define CFG_CPLD_BASE           0x80000000      /* CPLD                 */
-#define CFG_CPLD_SIZE           0x10000         /* only 16 used         */
+#define CONFIG_SYS_CPLD_BASE           0x80000000      /* CPLD                 */
+#define CONFIG_SYS_CPLD_SIZE           0x10000         /* only 16 used         */
 
-#define CFG_OR_TIMING_CPLD	(OR_CSNT_SAM | OR_ACS_DIV1 | OR_BI | \
+#define CONFIG_SYS_OR_TIMING_CPLD	(OR_CSNT_SAM | OR_ACS_DIV1 | OR_BI | \
 				 OR_SCY_1_CLK)
 
-#define CFG_BR4_PRELIM  ((CFG_CPLD_BASE & BR_BA_MSK) | BR_PS_8 | BR_V )
-#define CFG_OR4_PRELIM  (((-CFG_CPLD_SIZE) & OR_AM_MSK) | CFG_OR_TIMING_CPLD)
+#define CONFIG_SYS_BR4_PRELIM  ((CONFIG_SYS_CPLD_BASE & BR_BA_MSK) | BR_PS_8 | BR_V )
+#define CONFIG_SYS_OR4_PRELIM  (((-CONFIG_SYS_CPLD_SIZE) & OR_AM_MSK) | CONFIG_SYS_OR_TIMING_CPLD)
 
 /*
  * BR5 and OR5 (SRAM)
  */
-#define CFG_SRAM_BASE		0x60000000
-#define CFG_SRAM_SIZE		0x00080000
+#define CONFIG_SYS_SRAM_BASE		0x60000000
+#define CONFIG_SYS_SRAM_SIZE		0x00080000
 
-#define CFG_OR_TIMING_SRAM	(OR_CSNT_SAM | OR_ACS_DIV1 | OR_BI | \
+#define CONFIG_SYS_OR_TIMING_SRAM	(OR_CSNT_SAM | OR_ACS_DIV1 | OR_BI | \
 				 OR_SCY_15_CLK | OR_EHTR | OR_TRLX)
 
-#define CFG_BR5_PRELIM  ((CFG_SRAM_BASE & BR_BA_MSK) | BR_PS_8 | BR_V )
-#define CFG_OR5_PRELIM  (((-CFG_SRAM_SIZE) & OR_AM_MSK) | CFG_OR_TIMING_SRAM)
+#define CONFIG_SYS_BR5_PRELIM  ((CONFIG_SYS_SRAM_BASE & BR_BA_MSK) | BR_PS_8 | BR_V )
+#define CONFIG_SYS_OR5_PRELIM  (((-CONFIG_SYS_SRAM_SIZE) & OR_AM_MSK) | CONFIG_SYS_OR_TIMING_SRAM)
 
 #if defined(CONFIG_CP850)
 /*
  *  BR6 and OR6 (DPRAM) - only on CP850
  */
-#define CFG_OR6_PRELIM          0xffff8170
-#define CFG_BR6_PRELIM          0xa0000401
+#define CONFIG_SYS_OR6_PRELIM          0xffff8170
+#define CONFIG_SYS_BR6_PRELIM          0xa0000401
 #define DPRAM_BASE_ADDR         0xa0000000
 
 #define CONFIG_MISC_INIT_R      1
@@ -391,31 +391,31 @@
  * 4    Number of refresh cycles per period
  * 64   Refresh cycle in ms per number of rows
  */
-#define CFG_PTA_PER_CLK		((4096 * 64 * 1000) / (4 * 64))
+#define CONFIG_SYS_PTA_PER_CLK		((4096 * 64 * 1000) / (4 * 64))
 
 /*
  * Memory Periodic Timer Prescaler
  */
 
 /* periodic timer for refresh */
-#define CFG_MAMR_PTA		39
+#define CONFIG_SYS_MAMR_PTA		39
 
 /* refresh rate 15.6 us (= 64 ms / 4K = 62.4 / quad bursts) for <= 128 MBit	*/
-#define CFG_MPTPR_2BK_4K	MPTPR_PTP_DIV16		/* setting for 2 banks	*/
-#define CFG_MPTPR_1BK_4K	MPTPR_PTP_DIV32		/* setting for 1 bank	*/
+#define CONFIG_SYS_MPTPR_2BK_4K	MPTPR_PTP_DIV16		/* setting for 2 banks	*/
+#define CONFIG_SYS_MPTPR_1BK_4K	MPTPR_PTP_DIV32		/* setting for 1 bank	*/
 
 /* refresh rate 7.8 us (= 64 ms / 8K = 31.2 / quad bursts) for 256 MBit		*/
-#define CFG_MPTPR_2BK_8K	MPTPR_PTP_DIV8		/* setting for 2 banks	*/
-#define CFG_MPTPR_1BK_8K	MPTPR_PTP_DIV16		/* setting for 1 bank	*/
+#define CONFIG_SYS_MPTPR_2BK_8K	MPTPR_PTP_DIV8		/* setting for 2 banks	*/
+#define CONFIG_SYS_MPTPR_1BK_8K	MPTPR_PTP_DIV16		/* setting for 1 bank	*/
 
 /*
  * MAMR settings for SDRAM
  */
 
-#define CFG_MAMR_8COL	((CFG_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE | \
+#define CONFIG_SYS_MAMR_8COL	((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE | \
 			 MAMR_AMA_TYPE_0 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A11 | \
 			 MAMR_RLFA_1X    | MAMR_WLFA_1X    | MAMR_TLFA_4X)
-#define CFG_MAMR_9COL	((CFG_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE | \
+#define CONFIG_SYS_MAMR_9COL	((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE | \
 			 MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 | \
 			 MAMR_RLFA_1X    | MAMR_WLFA_1X    | MAMR_TLFA_4X)
 
@@ -423,7 +423,7 @@
  * MBMR settings for NAND flash
  */
 
-#define CFG_MBMR_NAND ( MBMR_WLFB_5X )
+#define CONFIG_SYS_MBMR_NAND ( MBMR_WLFB_5X )
 
 /*
  * Internal Definitions
diff --git a/include/configs/NETPHONE.h b/include/configs/NETPHONE.h
index 6c18b8169..34de94797 100644
--- a/include/configs/NETPHONE.h
+++ b/include/configs/NETPHONE.h
@@ -73,7 +73,7 @@
 
 #define CONFIG_AUTOSCRIPT
 #define CONFIG_LOADS_ECHO	0	/* echo off for serial download	*/
-#undef	CFG_LOADS_BAUD_CHANGE		/* don't allow baudrate change	*/
+#undef	CONFIG_SYS_LOADS_BAUD_CHANGE		/* don't allow baudrate change	*/
 
 #undef	CONFIG_WATCHDOG			/* watchdog disabled		*/
 
@@ -99,7 +99,7 @@
 
 #define	CONFIG_NET_MULTI	1	/* the only way to get the FEC in */
 #define	FEC_ENET		1	/* eth.c needs it that way... */
-#undef CFG_DISCOVER_PHY
+#undef CONFIG_SYS_DISCOVER_PHY
 #define CONFIG_MII		1
 #define CONFIG_MII_INIT		1
 #define CONFIG_RMII		1	/* use RMII interface */
@@ -133,29 +133,29 @@
 /*
  * Miscellaneous configurable options
  */
-#define	CFG_LONGHELP			/* undef to save memory		*/
-#define	CFG_PROMPT	"=> "		/* Monitor Command Prompt	*/
+#define	CONFIG_SYS_LONGHELP			/* undef to save memory		*/
+#define	CONFIG_SYS_PROMPT	"=> "		/* Monitor Command Prompt	*/
 
-#define CFG_HUSH_PARSER	1
-#define CFG_PROMPT_HUSH_PS2	"> "
+#define CONFIG_SYS_HUSH_PARSER	1
+#define CONFIG_SYS_PROMPT_HUSH_PS2	"> "
 
 #if defined(CONFIG_CMD_KGDB)
-#define	CFG_CBSIZE	1024		/* Console I/O Buffer Size	*/
+#define	CONFIG_SYS_CBSIZE	1024		/* Console I/O Buffer Size	*/
 #else
-#define	CFG_CBSIZE	256		/* Console I/O Buffer Size	*/
+#define	CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size	*/
 #endif
-#define	CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define	CFG_MAXARGS	16		/* max number of command args	*/
-#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+#define	CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define	CONFIG_SYS_MAXARGS	16		/* max number of command args	*/
+#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
 
-#define CFG_MEMTEST_START	0x0300000	/* memtest works on	*/
-#define CFG_MEMTEST_END		0x0700000	/* 3 ... 7 MB in DRAM	*/
+#define CONFIG_SYS_MEMTEST_START	0x0300000	/* memtest works on	*/
+#define CONFIG_SYS_MEMTEST_END		0x0700000	/* 3 ... 7 MB in DRAM	*/
 
-#define	CFG_LOAD_ADDR		0x100000	/* default load address	*/
+#define	CONFIG_SYS_LOAD_ADDR		0x100000	/* default load address	*/
 
-#define	CFG_HZ		1000		/* decrementer freq: 1 ms ticks	*/
+#define	CONFIG_SYS_HZ		1000		/* decrementer freq: 1 ms ticks	*/
 
-#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
 
 /*
  * Low Level Configuration Settings
@@ -165,74 +165,74 @@
 /*-----------------------------------------------------------------------
  * Internal Memory Mapped Register
  */
-#define CFG_IMMR		0xFF000000
+#define CONFIG_SYS_IMMR		0xFF000000
 
 /*-----------------------------------------------------------------------
  * Definitions for initial stack pointer and data area (in DPRAM)
  */
-#define CFG_INIT_RAM_ADDR	CFG_IMMR
-#define	CFG_INIT_RAM_END	0x3000	/* End of used area in DPRAM	*/
-#define	CFG_GBL_DATA_SIZE	64  /* size in bytes reserved for initial data */
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define	CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_IMMR
+#define	CONFIG_SYS_INIT_RAM_END	0x3000	/* End of used area in DPRAM	*/
+#define	CONFIG_SYS_GBL_DATA_SIZE	64  /* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define	CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
 /*-----------------------------------------------------------------------
  * Start addresses for the final memory configuration
  * (Set up by the startup code)
- * Please note that CFG_SDRAM_BASE _must_ start at 0
+ * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
  */
-#define	CFG_SDRAM_BASE		0x00000000
-#define CFG_FLASH_BASE		0x40000000
+#define	CONFIG_SYS_SDRAM_BASE		0x00000000
+#define CONFIG_SYS_FLASH_BASE		0x40000000
 #if defined(DEBUG)
-#define	CFG_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor	*/
+#define	CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor	*/
 #else
-#define	CFG_MONITOR_LEN		(192 << 10)	/* Reserve 192 kB for Monitor	*/
+#define	CONFIG_SYS_MONITOR_LEN		(192 << 10)	/* Reserve 192 kB for Monitor	*/
 #endif
-#define CFG_MONITOR_BASE	CFG_FLASH_BASE
-#define	CFG_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/
+#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_FLASH_BASE
+#define	CONFIG_SYS_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/
 #if CONFIG_NETPHONE_VERSION == 2
-#define CFG_FLASH_BASE4		0x40080000
+#define CONFIG_SYS_FLASH_BASE4		0x40080000
 #endif
 
-#define CFG_RESET_ADDRESS   0x80000000
+#define CONFIG_SYS_RESET_ADDRESS   0x80000000
 
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define	CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux	*/
+#define	CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux	*/
 
 /*-----------------------------------------------------------------------
  * FLASH organization
  */
 #if CONFIG_NETPHONE_VERSION == 1
-#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
+#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
 #elif CONFIG_NETPHONE_VERSION == 2
-#define CFG_MAX_FLASH_BANKS	2	/* max number of memory banks		*/
+#define CONFIG_SYS_MAX_FLASH_BANKS	2	/* max number of memory banks		*/
 #endif
-#define CFG_MAX_FLASH_SECT	8	/* max number of sectors on one chip	*/
+#define CONFIG_SYS_MAX_FLASH_SECT	8	/* max number of sectors on one chip	*/
 
-#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
-#define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
+#define CONFIG_SYS_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
+#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
 
-#define	CFG_ENV_IS_IN_FLASH	1
-#define CFG_ENV_SECT_SIZE	0x10000
+#define	CONFIG_ENV_IS_IN_FLASH	1
+#define CONFIG_ENV_SECT_SIZE	0x10000
 
-#define	CFG_ENV_ADDR		(CFG_FLASH_BASE + 0x60000)
-#define CFG_ENV_OFFSET		0
-#define	CFG_ENV_SIZE		0x4000
+#define	CONFIG_ENV_ADDR		(CONFIG_SYS_FLASH_BASE + 0x60000)
+#define CONFIG_ENV_OFFSET		0
+#define	CONFIG_ENV_SIZE		0x4000
 
-#define CFG_ENV_ADDR_REDUND	(CFG_FLASH_BASE + 0x70000)
-#define CFG_ENV_OFFSET_REDUND	0
-#define CFG_ENV_SIZE_REDUND	CFG_ENV_SIZE
+#define CONFIG_ENV_ADDR_REDUND	(CONFIG_SYS_FLASH_BASE + 0x70000)
+#define CONFIG_ENV_OFFSET_REDUND	0
+#define CONFIG_ENV_SIZE_REDUND	CONFIG_ENV_SIZE
 
 /*-----------------------------------------------------------------------
  * Cache Configuration
  */
-#define CFG_CACHELINE_SIZE	16	/* For all MPC8xx CPUs			*/
+#define CONFIG_SYS_CACHELINE_SIZE	16	/* For all MPC8xx CPUs			*/
 #if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT	4	/* log base 2 of the above value	*/
+#define CONFIG_SYS_CACHELINE_SHIFT	4	/* log base 2 of the above value	*/
 #endif
 
 /*-----------------------------------------------------------------------
@@ -242,10 +242,10 @@
  * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze
  */
 #if defined(CONFIG_WATCHDOG)
-#define CFG_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
+#define CONFIG_SYS_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
 			 SYPCR_SWE  | SYPCR_SWRI| SYPCR_SWP)
 #else
-#define CFG_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
+#define CONFIG_SYS_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
 #endif
 
 /*-----------------------------------------------------------------------
@@ -254,9 +254,9 @@
  * PCMCIA config., multi-function pin tri-state
  */
 #ifndef	CONFIG_CAN_DRIVER
-#define CFG_SIUMCR	(SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_MLRC01 | SIUMCR_FRC)
+#define CONFIG_SYS_SIUMCR	(SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_MLRC01 | SIUMCR_FRC)
 #else	/* we must activate GPL5 in the SIUMCR for CAN */
-#define CFG_SIUMCR	(SIUMCR_DBGC11 | SIUMCR_DBPC00 | SIUMCR_MLRC01 | SIUMCR_FRC)
+#define CONFIG_SYS_SIUMCR	(SIUMCR_DBGC11 | SIUMCR_DBPC00 | SIUMCR_MLRC01 | SIUMCR_FRC)
 #endif	/* CONFIG_CAN_DRIVER */
 
 /*-----------------------------------------------------------------------
@@ -264,20 +264,20 @@
  *-----------------------------------------------------------------------
  * Clear Reference Interrupt Status, Timebase freezing enabled
  */
-#define CFG_TBSCR	(TBSCR_REFA | TBSCR_REFB | TBSCR_TBF)
+#define CONFIG_SYS_TBSCR	(TBSCR_REFA | TBSCR_REFB | TBSCR_TBF)
 
 /*-----------------------------------------------------------------------
  * RTCSC - Real-Time Clock Status and Control Register		11-27
  *-----------------------------------------------------------------------
  */
-#define CFG_RTCSC	(RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE)
+#define CONFIG_SYS_RTCSC	(RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE)
 
 /*-----------------------------------------------------------------------
  * PISCR - Periodic Interrupt Status and Control		11-31
  *-----------------------------------------------------------------------
  * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
  */
-#define CFG_PISCR	(PISCR_PS | PISCR_PITF)
+#define CONFIG_SYS_PISCR	(PISCR_PS | PISCR_PITF)
 
 /*-----------------------------------------------------------------------
  * PLPRCR - PLL, Low-Power, and Reset Control Register		15-30
@@ -290,27 +290,27 @@
 #if CONFIG_XIN == 10000000
 
 #if MPC8XX_HZ == 120000000
-#define CFG_PLPRCR	((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
+#define CONFIG_SYS_PLPRCR	((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
 			 (0 << PLPRCR_S_SHIFT) | (12 << PLPRCR_MFI_SHIFT) | (0 << PLPRCR_PDF_SHIFT) | \
 			 PLPRCR_TEXPS)
 #elif MPC8XX_HZ == 100000000
-#define CFG_PLPRCR	((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
+#define CONFIG_SYS_PLPRCR	((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
 			 (0 << PLPRCR_S_SHIFT) | (10 << PLPRCR_MFI_SHIFT) | (0 << PLPRCR_PDF_SHIFT) | \
 			 PLPRCR_TEXPS)
 #elif MPC8XX_HZ == 50000000
-#define CFG_PLPRCR	((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
+#define CONFIG_SYS_PLPRCR	((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
 			 (1 << PLPRCR_S_SHIFT) | (8 << PLPRCR_MFI_SHIFT) | (3 << PLPRCR_PDF_SHIFT) | \
 			 PLPRCR_TEXPS)
 #elif MPC8XX_HZ == 25000000
-#define CFG_PLPRCR	((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
+#define CONFIG_SYS_PLPRCR	((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
 			 (2 << PLPRCR_S_SHIFT) | (8 << PLPRCR_MFI_SHIFT) | (3 << PLPRCR_PDF_SHIFT) | \
 			 PLPRCR_TEXPS)
 #elif MPC8XX_HZ == 40000000
-#define CFG_PLPRCR	((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
+#define CONFIG_SYS_PLPRCR	((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
 			 (1 << PLPRCR_S_SHIFT) | (8 << PLPRCR_MFI_SHIFT) | (4 << PLPRCR_PDF_SHIFT) | \
 			 PLPRCR_TEXPS)
 #elif MPC8XX_HZ == 75000000
-#define CFG_PLPRCR	((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
+#define CONFIG_SYS_PLPRCR	((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
 			 (1 << PLPRCR_S_SHIFT) | (15 << PLPRCR_MFI_SHIFT) | (0 << PLPRCR_PDF_SHIFT) | \
 			 PLPRCR_TEXPS)
 #else
@@ -320,15 +320,15 @@
 #elif CONFIG_XIN == 50000000
 
 #if MPC8XX_HZ == 120000000
-#define CFG_PLPRCR	((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
+#define CONFIG_SYS_PLPRCR	((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
 			 (0 << PLPRCR_S_SHIFT) | (12 << PLPRCR_MFI_SHIFT) | (4 << PLPRCR_PDF_SHIFT) | \
 			 PLPRCR_TEXPS)
 #elif MPC8XX_HZ == 100000000
-#define CFG_PLPRCR	((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
+#define CONFIG_SYS_PLPRCR	((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
 			 (0 << PLPRCR_S_SHIFT) | (6 << PLPRCR_MFI_SHIFT) | (2 << PLPRCR_PDF_SHIFT) | \
 			 PLPRCR_TEXPS)
 #elif MPC8XX_HZ ==  66666666
-#define CFG_PLPRCR	((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
+#define CONFIG_SYS_PLPRCR	((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
 			 (1 << PLPRCR_S_SHIFT) | (8 << PLPRCR_MFI_SHIFT) | (2 << PLPRCR_PDF_SHIFT) | \
 			 PLPRCR_TEXPS)
 #else
@@ -353,12 +353,12 @@
 
 #define SCCR_MASK	SCCR_EBDF11
 #if MPC8XX_HZ > 66666666
-#define CFG_SCCR	(/* SCCR_TBS	| */ SCCR_CRQEN | \
+#define CONFIG_SYS_SCCR	(/* SCCR_TBS	| */ SCCR_CRQEN | \
 			 SCCR_COM00   | SCCR_DFSYNC00 | SCCR_DFBRG00  | \
 			 SCCR_DFNL000 | SCCR_DFNH000  | SCCR_DFLCD000 | \
 			 SCCR_DFALCD00 | SCCR_EBDF01)
 #else
-#define CFG_SCCR	(/* SCCR_TBS	| */ SCCR_CRQEN | \
+#define CONFIG_SYS_SCCR	(/* SCCR_TBS	| */ SCCR_CRQEN | \
 			 SCCR_COM00   | SCCR_DFSYNC00 | SCCR_DFBRG00  | \
 			 SCCR_DFNL000 | SCCR_DFNH000  | SCCR_DFLCD000 | \
 			 SCCR_DFALCD00)
@@ -369,8 +369,8 @@
  *-----------------------------------------------------------------------
  *
  */
-/*#define	CFG_DER	0x2002000F*/
-#define CFG_DER	0
+/*#define	CONFIG_SYS_DER	0x2002000F*/
+#define CONFIG_SYS_DER	0
 
 /*
  * Init Memory Controller:
@@ -384,23 +384,23 @@
  * restrict access enough to keep SRAM working (if any)
  * but not too much to meddle with FLASH accesses
  */
-#define CFG_REMAP_OR_AM		0x80000000	/* OR addr mask */
-#define CFG_PRELIM_OR_AM	0xE0000000	/* OR addr mask */
+#define CONFIG_SYS_REMAP_OR_AM		0x80000000	/* OR addr mask */
+#define CONFIG_SYS_PRELIM_OR_AM	0xE0000000	/* OR addr mask */
 
 /* FLASH timing: ACS = 11, TRLX = 0, CSNT = 1, SCY = 5, EHTR = 1	*/
-#define CFG_OR_TIMING_FLASH	(OR_CSNT_SAM  | OR_BI | OR_SCY_5_CLK | OR_TRLX)
+#define CONFIG_SYS_OR_TIMING_FLASH	(OR_CSNT_SAM  | OR_BI | OR_SCY_5_CLK | OR_TRLX)
 
-#define CFG_OR0_REMAP	(CFG_REMAP_OR_AM  | CFG_OR_TIMING_FLASH)
-#define CFG_OR0_PRELIM	(CFG_PRELIM_OR_AM | CFG_OR_TIMING_FLASH)
-#define CFG_BR0_PRELIM	((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_PS_8 | BR_V )
+#define CONFIG_SYS_OR0_REMAP	(CONFIG_SYS_REMAP_OR_AM  | CONFIG_SYS_OR_TIMING_FLASH)
+#define CONFIG_SYS_OR0_PRELIM	(CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_FLASH)
+#define CONFIG_SYS_BR0_PRELIM	((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_PS_8 | BR_V )
 
 #if CONFIG_NETPHONE_VERSION == 2
 
 #define FLASH_BASE4_PRELIM	0x40080000	/* FLASH bank #1	*/
 
-#define CFG_OR4_REMAP	(CFG_REMAP_OR_AM  | CFG_OR_TIMING_FLASH)
-#define CFG_OR4_PRELIM	(CFG_PRELIM_OR_AM | CFG_OR_TIMING_FLASH)
-#define CFG_BR4_PRELIM	((FLASH_BASE4_PRELIM & BR_BA_MSK) | BR_PS_8 | BR_V )
+#define CONFIG_SYS_OR4_REMAP	(CONFIG_SYS_REMAP_OR_AM  | CONFIG_SYS_OR_TIMING_FLASH)
+#define CONFIG_SYS_OR4_PRELIM	(CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_FLASH)
+#define CONFIG_SYS_BR4_PRELIM	((FLASH_BASE4_PRELIM & BR_BA_MSK) | BR_PS_8 | BR_V )
 
 #endif
 
@@ -412,10 +412,10 @@
 #define	SDRAM_MAX_SIZE		(256 << 20)	/* max 256MB per bank	*/
 
 /* SDRAM timing: Multiplexed addresses, GPL5 output to GPL5_A (don't care)	*/
-#define CFG_OR_TIMING_SDRAM	(OR_CSNT_SAM | OR_G5LS)
+#define CONFIG_SYS_OR_TIMING_SDRAM	(OR_CSNT_SAM | OR_G5LS)
 
-#define CFG_OR3_PRELIM	((0xFFFFFFFFLU & ~(SDRAM_MAX_SIZE - 1)) | CFG_OR_TIMING_SDRAM)
-#define CFG_BR3_PRELIM	((SDRAM_BASE3_PRELIM & BR_BA_MSK) | BR_MS_UPMB | BR_PS_32 | BR_V)
+#define CONFIG_SYS_OR3_PRELIM	((0xFFFFFFFFLU & ~(SDRAM_MAX_SIZE - 1)) | CONFIG_SYS_OR_TIMING_SDRAM)
+#define CONFIG_SYS_BR3_PRELIM	((SDRAM_BASE3_PRELIM & BR_BA_MSK) | BR_MS_UPMB | BR_PS_32 | BR_V)
 
 /*
  * Memory Periodic Timer Prescaler
@@ -448,34 +448,34 @@
  * 80 Mhz => 80.000.000 / Divider = 156
  */
 
-#define CFG_MAMR_PTA		 234
+#define CONFIG_SYS_MAMR_PTA		 234
 
 /*
  * For 16 MBit, refresh rates could be 31.3 us
  * (= 64 ms / 2K = 125 / quad bursts).
  * For a simpler initialization, 15.6 us is used instead.
  *
- * #define CFG_MPTPR_2BK_2K	MPTPR_PTP_DIV32		for 2 banks
- * #define CFG_MPTPR_1BK_2K	MPTPR_PTP_DIV64		for 1 bank
+ * #define CONFIG_SYS_MPTPR_2BK_2K	MPTPR_PTP_DIV32		for 2 banks
+ * #define CONFIG_SYS_MPTPR_1BK_2K	MPTPR_PTP_DIV64		for 1 bank
  */
-#define CFG_MPTPR_2BK_4K	MPTPR_PTP_DIV16		/* setting for 2 banks	*/
-#define CFG_MPTPR_1BK_4K	MPTPR_PTP_DIV32		/* setting for 1 bank	*/
+#define CONFIG_SYS_MPTPR_2BK_4K	MPTPR_PTP_DIV16		/* setting for 2 banks	*/
+#define CONFIG_SYS_MPTPR_1BK_4K	MPTPR_PTP_DIV32		/* setting for 1 bank	*/
 
 /* refresh rate 7.8 us (= 64 ms / 8K = 31.2 / quad bursts) for 256 MBit		*/
-#define CFG_MPTPR_2BK_8K	MPTPR_PTP_DIV8		/* setting for 2 banks	*/
-#define CFG_MPTPR_1BK_8K	MPTPR_PTP_DIV16		/* setting for 1 bank	*/
+#define CONFIG_SYS_MPTPR_2BK_8K	MPTPR_PTP_DIV8		/* setting for 2 banks	*/
+#define CONFIG_SYS_MPTPR_1BK_8K	MPTPR_PTP_DIV16		/* setting for 1 bank	*/
 
 /*
  * MAMR settings for SDRAM
  */
 
 /* 8 column SDRAM */
-#define CFG_MAMR_8COL	((CFG_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
+#define CONFIG_SYS_MAMR_8COL	((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
 			 MAMR_AMA_TYPE_0 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A11 |	\
 			 MAMR_RLFA_1X	 | MAMR_WLFA_1X	   | MAMR_TLFA_4X)
 
 /* 9 column SDRAM */
-#define CFG_MAMR_9COL	((CFG_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
+#define CONFIG_SYS_MAMR_9COL	((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
 			 MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 |	\
 			 MAMR_RLFA_1X	 | MAMR_WLFA_1X	   | MAMR_TLFA_4X)
 
@@ -487,8 +487,6 @@
 #define	BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH	*/
 #define BOOTFLAG_WARM	0x02		/* Software reboot			*/
 
-#define CONFIG_ARTOS			/* include ARTOS support */
-
 #define CONFIG_LAST_STAGE_INIT		/* needed to reset the damn phys */
 
 /****************************************************************/
@@ -503,12 +501,12 @@
 
 /* NAND */
 #define CONFIG_NAND_LEGACY
-#define CFG_NAND_BASE		NAND_BASE
+#define CONFIG_SYS_NAND_BASE		NAND_BASE
 #define CONFIG_MTD_NAND_ECC_JFFS2
 #define CONFIG_MTD_NAND_VERIFY_WRITE
 #define CONFIG_MTD_NAND_UNSAFE
 
-#define CFG_MAX_NAND_DEVICE	1
+#define CONFIG_SYS_MAX_NAND_DEVICE	1
 
 #define SECTORSIZE		512
 #define ADDR_COLUMN		1
@@ -521,39 +519,39 @@
 /* ALE = PD17, CLE = PE18, CE = PE20, F_RY_BY = PE31 */
 #define NAND_DISABLE_CE(nand) \
 	do { \
-		(((volatile immap_t *)CFG_IMMR)->im_cpm.cp_pedat) |=  (1 << (31 - 20)); \
+		(((volatile immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pedat) |=  (1 << (31 - 20)); \
 	} while(0)
 
 #define NAND_ENABLE_CE(nand) \
 	do { \
-		(((volatile immap_t *)CFG_IMMR)->im_cpm.cp_pedat) &= ~(1 << (31 - 20)); \
+		(((volatile immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pedat) &= ~(1 << (31 - 20)); \
 	} while(0)
 
 #define NAND_CTL_CLRALE(nandptr) \
 	do { \
-		(((volatile immap_t *)CFG_IMMR)->im_cpm.cp_pedat) &= ~(1 << (31 - 17)); \
+		(((volatile immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pedat) &= ~(1 << (31 - 17)); \
 	} while(0)
 
 #define NAND_CTL_SETALE(nandptr) \
 	do { \
-		(((volatile immap_t *)CFG_IMMR)->im_cpm.cp_pedat) |=  (1 << (31 - 17)); \
+		(((volatile immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pedat) |=  (1 << (31 - 17)); \
 	} while(0)
 
 #define NAND_CTL_CLRCLE(nandptr) \
 	do { \
-		(((volatile immap_t *)CFG_IMMR)->im_cpm.cp_pedat) &= ~(1 << (31 - 18)); \
+		(((volatile immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pedat) &= ~(1 << (31 - 18)); \
 	} while(0)
 
 #define NAND_CTL_SETCLE(nandptr) \
 	do { \
-		(((volatile immap_t *)CFG_IMMR)->im_cpm.cp_pedat) |=  (1 << (31 - 18)); \
+		(((volatile immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pedat) |=  (1 << (31 - 18)); \
 	} while(0)
 
 #if CONFIG_NETPHONE_VERSION == 1
 #define NAND_WAIT_READY(nand) \
 	do { \
 		int _tries = 0; \
-		while ((((volatile immap_t *)CFG_IMMR)->im_cpm.cp_pedat & (1 << (31 - 31))) == 0) \
+		while ((((volatile immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pedat & (1 << (31 - 31))) == 0) \
 			if (++_tries > 100000) \
 				break; \
 	} while (0)
@@ -561,7 +559,7 @@
 #define NAND_WAIT_READY(nand) \
 	do { \
 		int _tries = 0; \
-		while ((((volatile immap_t *)CFG_IMMR)->im_ioport.iop_pcdat & (1 << (15 - 15))) == 0) \
+		while ((((volatile immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pcdat & (1 << (15 - 15))) == 0) \
 			if (++_tries > 100000) \
 				break; \
 	} while (0)
@@ -587,8 +585,8 @@
 
 /*****************************************************************************/
 
-#define CFG_DIRECT_FLASH_TFTP
-#define CFG_DIRECT_NAND_TFTP
+#define CONFIG_SYS_DIRECT_FLASH_TFTP
+#define CONFIG_SYS_DIRECT_NAND_TFTP
 
 /*****************************************************************************/
 
@@ -598,7 +596,7 @@
 #define STATUS_LED_BIT		0x00000080		/* bit 24 */
 #endif
 
-#define STATUS_LED_PERIOD	(CFG_HZ / 2)
+#define STATUS_LED_PERIOD	(CONFIG_SYS_HZ / 2)
 #define STATUS_LED_STATE	STATUS_LED_BLINKING
 
 #define STATUS_LED_ACTIVE	0		/* LED on for bit == 0	*/
@@ -613,15 +611,15 @@ typedef unsigned int led_id_t;
 
 #define __led_toggle(_msk) \
 	do { \
-		((volatile immap_t *)CFG_IMMR)->im_cpm.cp_pedat ^= (_msk); \
+		((volatile immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pedat ^= (_msk); \
 	} while(0)
 
 #define __led_set(_msk, _st) \
 	do { \
 		if ((_st)) \
-			((volatile immap_t *)CFG_IMMR)->im_cpm.cp_pedat |= (_msk); \
+			((volatile immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pedat |= (_msk); \
 		else \
-			((volatile immap_t *)CFG_IMMR)->im_cpm.cp_pedat &= ~(_msk); \
+			((volatile immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pedat &= ~(_msk); \
 	} while(0)
 
 #define __led_init(msk, st) __led_set(msk, st)
@@ -761,26 +759,26 @@ typedef unsigned int led_id_t;
 
 /* serial interfacing macros */
 
-#define SED156X_SPI_RXD_PORT	(((volatile immap_t *)CFG_IMMR)->im_cpm.cp_pbdat)
+#define SED156X_SPI_RXD_PORT	(((volatile immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pbdat)
 #define SED156X_SPI_RXD_MASK	0x00000008
 
-#define SED156X_SPI_TXD_PORT	(((volatile immap_t *)CFG_IMMR)->im_cpm.cp_pbdat)
+#define SED156X_SPI_TXD_PORT	(((volatile immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pbdat)
 #define SED156X_SPI_TXD_MASK	0x00000004
 
-#define SED156X_SPI_CLK_PORT	(((volatile immap_t *)CFG_IMMR)->im_cpm.cp_pbdat)
+#define SED156X_SPI_CLK_PORT	(((volatile immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pbdat)
 #define SED156X_SPI_CLK_MASK	0x00000002
 
-#define SED156X_CS_PORT		(((volatile immap_t *)CFG_IMMR)->im_cpm.cp_pbdat)
+#define SED156X_CS_PORT		(((volatile immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pbdat)
 #define SED156X_CS_MASK		0x00000010
 
-#define SED156X_A0_PORT		(((volatile immap_t *)CFG_IMMR)->im_ioport.iop_pcdat)
+#define SED156X_A0_PORT		(((volatile immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pcdat)
 #define SED156X_A0_MASK		0x0020
 
 /*************************************************************************************************/
 
-#define CFG_CONSOLE_IS_IN_ENV		1
-#define CFG_CONSOLE_OVERWRITE_ROUTINE	1
-#define CFG_CONSOLE_ENV_OVERWRITE	1
+#define CONFIG_SYS_CONSOLE_IS_IN_ENV		1
+#define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE	1
+#define CONFIG_SYS_CONSOLE_ENV_OVERWRITE	1
 
 /*************************************************************************************************/
 
@@ -793,7 +791,7 @@ typedef unsigned int led_id_t;
 
 /* phone console configuration */
 
-#define PHONE_CONSOLE_POLL_HZ		(CFG_HZ/200)	/* poll every 5ms */
+#define PHONE_CONSOLE_POLL_HZ		(CONFIG_SYS_HZ/200)	/* poll every 5ms */
 
 /*************************************************************************************************/
 
@@ -801,7 +799,7 @@ typedef unsigned int led_id_t;
 #define CONFIG_CDP_DEVICE_ID_PREFIX	"NP"	/* netphone */
 #define CONFIG_CDP_PORT_ID		"eth%d"
 #define CONFIG_CDP_CAPABILITIES		0x00000010
-#define CONFIG_CDP_VERSION		"u-boot" " " __DATE__ " " __TIME__
+#define CONFIG_CDP_VERSION		"u-boot" " " U_BOOT_DATE " " U_BOOT_TIME
 #define CONFIG_CDP_PLATFORM		"Intracom NetPhone"
 #define CONFIG_CDP_TRIGGER		0x20020001
 #define CONFIG_CDP_POWER_CONSUMPTION	4300	/* 90 mA @ 48V */
diff --git a/include/configs/NETTA.h b/include/configs/NETTA.h
index 1f1bc540b..004b3c8a4 100644
--- a/include/configs/NETTA.h
+++ b/include/configs/NETTA.h
@@ -70,7 +70,7 @@
 	"bootm"
 
 #define CONFIG_LOADS_ECHO	0	/* echo off for serial download	*/
-#undef	CFG_LOADS_BAUD_CHANGE		/* don't allow baudrate change	*/
+#undef	CONFIG_SYS_LOADS_BAUD_CHANGE		/* don't allow baudrate change	*/
 
 #undef	CONFIG_WATCHDOG			/* watchdog disabled		*/
 #define CONFIG_HW_WATCHDOG
@@ -95,7 +95,7 @@
 
 #define	CONFIG_NET_MULTI	1	/* the only way to get the FEC in */
 #define	FEC_ENET		1	/* eth.c needs it that way... */
-#undef  CFG_DISCOVER_PHY		/* do not discover phys */
+#undef  CONFIG_SYS_DISCOVER_PHY		/* do not discover phys */
 #define CONFIG_MII		1
 #define CONFIG_MII_INIT		1
 #define CONFIG_RMII		1	/* use RMII interface */
@@ -117,9 +117,9 @@
 #define CONFIG_ENV_OVERWRITE	1	/* allow modification of vendor params */
 
 /* POST support */
-#define CONFIG_POST		(CFG_POST_MEMORY   | \
-				 CFG_POST_CODEC	   | \
-				 CFG_POST_DSP	   )
+#define CONFIG_POST		(CONFIG_SYS_POST_MEMORY   | \
+				 CONFIG_SYS_POST_CODEC	   | \
+				 CONFIG_SYS_POST_DSP	   )
 
 
 /*
@@ -146,29 +146,29 @@
 /*
  * Miscellaneous configurable options
  */
-#define	CFG_LONGHELP			/* undef to save memory		*/
-#define	CFG_PROMPT	"=> "		/* Monitor Command Prompt	*/
+#define	CONFIG_SYS_LONGHELP			/* undef to save memory		*/
+#define	CONFIG_SYS_PROMPT	"=> "		/* Monitor Command Prompt	*/
 
-#define CFG_HUSH_PARSER	1
-#define CFG_PROMPT_HUSH_PS2	"> "
+#define CONFIG_SYS_HUSH_PARSER	1
+#define CONFIG_SYS_PROMPT_HUSH_PS2	"> "
 
 #if defined(CONFIG_CMD_KGDB)
-#define	CFG_CBSIZE	1024		/* Console I/O Buffer Size	*/
+#define	CONFIG_SYS_CBSIZE	1024		/* Console I/O Buffer Size	*/
 #else
-#define	CFG_CBSIZE	256		/* Console I/O Buffer Size	*/
+#define	CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size	*/
 #endif
-#define	CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define	CFG_MAXARGS	16		/* max number of command args	*/
-#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+#define	CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define	CONFIG_SYS_MAXARGS	16		/* max number of command args	*/
+#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
 
-#define CFG_MEMTEST_START	0x0300000	/* memtest works on	*/
-#define CFG_MEMTEST_END		0x0700000	/* 3 ... 7 MB in DRAM	*/
+#define CONFIG_SYS_MEMTEST_START	0x0300000	/* memtest works on	*/
+#define CONFIG_SYS_MEMTEST_END		0x0700000	/* 3 ... 7 MB in DRAM	*/
 
-#define	CFG_LOAD_ADDR		0x100000	/* default load address	*/
+#define	CONFIG_SYS_LOAD_ADDR		0x100000	/* default load address	*/
 
-#define	CFG_HZ		1000		/* decrementer freq: 1 ms ticks	*/
+#define	CONFIG_SYS_HZ		1000		/* decrementer freq: 1 ms ticks	*/
 
-#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
 
 /*
  * Low Level Configuration Settings
@@ -178,65 +178,65 @@
 /*-----------------------------------------------------------------------
  * Internal Memory Mapped Register
  */
-#define CFG_IMMR		0xFF000000
+#define CONFIG_SYS_IMMR		0xFF000000
 
 /*-----------------------------------------------------------------------
  * Definitions for initial stack pointer and data area (in DPRAM)
  */
-#define CFG_INIT_RAM_ADDR	CFG_IMMR
-#define	CFG_INIT_RAM_END	0x3000	/* End of used area in DPRAM	*/
-#define	CFG_GBL_DATA_SIZE	64  /* size in bytes reserved for initial data */
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define	CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_IMMR
+#define	CONFIG_SYS_INIT_RAM_END	0x3000	/* End of used area in DPRAM	*/
+#define	CONFIG_SYS_GBL_DATA_SIZE	64  /* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define	CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
 /*-----------------------------------------------------------------------
  * Start addresses for the final memory configuration
  * (Set up by the startup code)
- * Please note that CFG_SDRAM_BASE _must_ start at 0
+ * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
  */
-#define	CFG_SDRAM_BASE		0x00000000
-#define CFG_FLASH_BASE		0x40000000
+#define	CONFIG_SYS_SDRAM_BASE		0x00000000
+#define CONFIG_SYS_FLASH_BASE		0x40000000
 #if defined(DEBUG)
-#define	CFG_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor	*/
+#define	CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor	*/
 #else
-#define	CFG_MONITOR_LEN		(192 << 10)	/* Reserve 192 kB for Monitor	*/
+#define	CONFIG_SYS_MONITOR_LEN		(192 << 10)	/* Reserve 192 kB for Monitor	*/
 #endif
-#define CFG_MONITOR_BASE	CFG_FLASH_BASE
-#define	CFG_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/
+#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_FLASH_BASE
+#define	CONFIG_SYS_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/
 
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define	CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux	*/
+#define	CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux	*/
 
 /*-----------------------------------------------------------------------
  * FLASH organization
  */
-#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
-#define CFG_MAX_FLASH_SECT	8	/* max number of sectors on one chip	*/
+#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
+#define CONFIG_SYS_MAX_FLASH_SECT	8	/* max number of sectors on one chip	*/
 
-#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
-#define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
+#define CONFIG_SYS_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
+#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
 
-#define	CFG_ENV_IS_IN_FLASH	1
-#define CFG_ENV_SECT_SIZE	0x10000
+#define	CONFIG_ENV_IS_IN_FLASH	1
+#define CONFIG_ENV_SECT_SIZE	0x10000
 
-#define	CFG_ENV_ADDR		(CFG_FLASH_BASE + 0x60000)
-#define CFG_ENV_OFFSET		0
-#define	CFG_ENV_SIZE		0x4000
+#define	CONFIG_ENV_ADDR		(CONFIG_SYS_FLASH_BASE + 0x60000)
+#define CONFIG_ENV_OFFSET		0
+#define	CONFIG_ENV_SIZE		0x4000
 
-#define CFG_ENV_ADDR_REDUND	(CFG_FLASH_BASE + 0x70000)
-#define CFG_ENV_OFFSET_REDUND	0
-#define CFG_ENV_SIZE_REDUND	CFG_ENV_SIZE
+#define CONFIG_ENV_ADDR_REDUND	(CONFIG_SYS_FLASH_BASE + 0x70000)
+#define CONFIG_ENV_OFFSET_REDUND	0
+#define CONFIG_ENV_SIZE_REDUND	CONFIG_ENV_SIZE
 
 /*-----------------------------------------------------------------------
  * Cache Configuration
  */
-#define CFG_CACHELINE_SIZE	16	/* For all MPC8xx CPUs			*/
+#define CONFIG_SYS_CACHELINE_SIZE	16	/* For all MPC8xx CPUs			*/
 #if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT	4	/* log base 2 of the above value	*/
+#define CONFIG_SYS_CACHELINE_SHIFT	4	/* log base 2 of the above value	*/
 #endif
 
 /*-----------------------------------------------------------------------
@@ -246,10 +246,10 @@
  * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze
  */
 #if defined(CONFIG_WATCHDOG)
-#define CFG_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
+#define CONFIG_SYS_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
 			 SYPCR_SWE  | SYPCR_SWRI| SYPCR_SWP)
 #else
-#define CFG_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
+#define CONFIG_SYS_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
 #endif
 
 /*-----------------------------------------------------------------------
@@ -258,9 +258,9 @@
  * PCMCIA config., multi-function pin tri-state
  */
 #ifndef	CONFIG_CAN_DRIVER
-#define CFG_SIUMCR	(SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_MLRC01 | SIUMCR_FRC)
+#define CONFIG_SYS_SIUMCR	(SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_MLRC01 | SIUMCR_FRC)
 #else	/* we must activate GPL5 in the SIUMCR for CAN */
-#define CFG_SIUMCR	(SIUMCR_DBGC11 | SIUMCR_DBPC00 | SIUMCR_MLRC01 | SIUMCR_FRC)
+#define CONFIG_SYS_SIUMCR	(SIUMCR_DBGC11 | SIUMCR_DBPC00 | SIUMCR_MLRC01 | SIUMCR_FRC)
 #endif	/* CONFIG_CAN_DRIVER */
 
 /*-----------------------------------------------------------------------
@@ -268,20 +268,20 @@
  *-----------------------------------------------------------------------
  * Clear Reference Interrupt Status, Timebase freezing enabled
  */
-#define CFG_TBSCR	(TBSCR_REFA | TBSCR_REFB | TBSCR_TBF)
+#define CONFIG_SYS_TBSCR	(TBSCR_REFA | TBSCR_REFB | TBSCR_TBF)
 
 /*-----------------------------------------------------------------------
  * RTCSC - Real-Time Clock Status and Control Register		11-27
  *-----------------------------------------------------------------------
  */
-#define CFG_RTCSC	(RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE)
+#define CONFIG_SYS_RTCSC	(RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE)
 
 /*-----------------------------------------------------------------------
  * PISCR - Periodic Interrupt Status and Control		11-31
  *-----------------------------------------------------------------------
  * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
  */
-#define CFG_PISCR	(PISCR_PS | PISCR_PITF)
+#define CONFIG_SYS_PISCR	(PISCR_PS | PISCR_PITF)
 
 /*-----------------------------------------------------------------------
  * PLPRCR - PLL, Low-Power, and Reset Control Register		15-30
@@ -294,27 +294,27 @@
 #if CONFIG_XIN == 10000000
 
 #if MPC8XX_HZ == 120000000
-#define CFG_PLPRCR	((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
+#define CONFIG_SYS_PLPRCR	((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
 			 (0 << PLPRCR_S_SHIFT) | (12 << PLPRCR_MFI_SHIFT) | (0 << PLPRCR_PDF_SHIFT) | \
 			 PLPRCR_TEXPS)
 #elif MPC8XX_HZ == 100000000
-#define CFG_PLPRCR	((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
+#define CONFIG_SYS_PLPRCR	((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
 			 (0 << PLPRCR_S_SHIFT) | (10 << PLPRCR_MFI_SHIFT) | (0 << PLPRCR_PDF_SHIFT) | \
 			 PLPRCR_TEXPS)
 #elif MPC8XX_HZ == 50000000
-#define CFG_PLPRCR	((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
+#define CONFIG_SYS_PLPRCR	((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
 			 (1 << PLPRCR_S_SHIFT) | (8 << PLPRCR_MFI_SHIFT) | (3 << PLPRCR_PDF_SHIFT) | \
 			 PLPRCR_TEXPS)
 #elif MPC8XX_HZ == 25000000
-#define CFG_PLPRCR	((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
+#define CONFIG_SYS_PLPRCR	((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
 			 (2 << PLPRCR_S_SHIFT) | (8 << PLPRCR_MFI_SHIFT) | (3 << PLPRCR_PDF_SHIFT) | \
 			 PLPRCR_TEXPS)
 #elif MPC8XX_HZ == 40000000
-#define CFG_PLPRCR	((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
+#define CONFIG_SYS_PLPRCR	((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
 			 (1 << PLPRCR_S_SHIFT) | (8 << PLPRCR_MFI_SHIFT) | (4 << PLPRCR_PDF_SHIFT) | \
 			 PLPRCR_TEXPS)
 #elif MPC8XX_HZ == 75000000
-#define CFG_PLPRCR	((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
+#define CONFIG_SYS_PLPRCR	((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
 			 (1 << PLPRCR_S_SHIFT) | (15 << PLPRCR_MFI_SHIFT) | (0 << PLPRCR_PDF_SHIFT) | \
 			 PLPRCR_TEXPS)
 #else
@@ -324,19 +324,19 @@
 #elif CONFIG_XIN == 50000000
 
 #if MPC8XX_HZ == 120000000
-#define CFG_PLPRCR	((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
+#define CONFIG_SYS_PLPRCR	((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
 			 (0 << PLPRCR_S_SHIFT) | (12 << PLPRCR_MFI_SHIFT) | (4 << PLPRCR_PDF_SHIFT) | \
 			 PLPRCR_TEXPS)
 #elif MPC8XX_HZ == 100000000
-#define CFG_PLPRCR	((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
+#define CONFIG_SYS_PLPRCR	((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
 			 (0 << PLPRCR_S_SHIFT) | (6 << PLPRCR_MFI_SHIFT) | (2 << PLPRCR_PDF_SHIFT) | \
 			 PLPRCR_TEXPS)
 #elif MPC8XX_HZ ==  80000000
-#define CFG_PLPRCR	((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
+#define CONFIG_SYS_PLPRCR	((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
 			 (0 << PLPRCR_S_SHIFT) | (8 << PLPRCR_MFI_SHIFT) | (4 << PLPRCR_PDF_SHIFT) | \
 			 PLPRCR_TEXPS)
 #elif MPC8XX_HZ ==  50000000
-#define CFG_PLPRCR	((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
+#define CONFIG_SYS_PLPRCR	((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
 			 (1 << PLPRCR_S_SHIFT) | (6 << PLPRCR_MFI_SHIFT) | (2 << PLPRCR_PDF_SHIFT) | \
 			 PLPRCR_TEXPS)
 #else
@@ -361,12 +361,12 @@
 
 #define SCCR_MASK	SCCR_EBDF11
 #if MPC8XX_HZ > 66666666
-#define CFG_SCCR	(/* SCCR_TBS	| */ SCCR_CRQEN | \
+#define CONFIG_SYS_SCCR	(/* SCCR_TBS	| */ SCCR_CRQEN | \
 			 SCCR_COM00   | SCCR_DFSYNC00 | SCCR_DFBRG00  | \
 			 SCCR_DFNL111 | SCCR_DFNH000  | SCCR_DFLCD000 | \
 			 SCCR_DFALCD00 | SCCR_EBDF01)
 #else
-#define CFG_SCCR	(/* SCCR_TBS	| */ SCCR_CRQEN | \
+#define CONFIG_SYS_SCCR	(/* SCCR_TBS	| */ SCCR_CRQEN | \
 			 SCCR_COM00   | SCCR_DFSYNC00 | SCCR_DFBRG00  | \
 			 SCCR_DFNL111 | SCCR_DFNH000  | SCCR_DFLCD000 | \
 			 SCCR_DFALCD00)
@@ -377,8 +377,8 @@
  *-----------------------------------------------------------------------
  *
  */
-/*#define	CFG_DER	0x2002000F*/
-#define CFG_DER	0
+/*#define	CONFIG_SYS_DER	0x2002000F*/
+#define CONFIG_SYS_DER	0
 
 /*
  * Init Memory Controller:
@@ -392,15 +392,15 @@
  * restrict access enough to keep SRAM working (if any)
  * but not too much to meddle with FLASH accesses
  */
-#define CFG_REMAP_OR_AM		0x80000000	/* OR addr mask */
-#define CFG_PRELIM_OR_AM	0xE0000000	/* OR addr mask */
+#define CONFIG_SYS_REMAP_OR_AM		0x80000000	/* OR addr mask */
+#define CONFIG_SYS_PRELIM_OR_AM	0xE0000000	/* OR addr mask */
 
 /* FLASH timing: ACS = 11, TRLX = 0, CSNT = 1, SCY = 5, EHTR = 1	*/
-#define CFG_OR_TIMING_FLASH	(OR_CSNT_SAM  | OR_BI | OR_SCY_5_CLK | OR_TRLX)
+#define CONFIG_SYS_OR_TIMING_FLASH	(OR_CSNT_SAM  | OR_BI | OR_SCY_5_CLK | OR_TRLX)
 
-#define CFG_OR0_REMAP	(CFG_REMAP_OR_AM  | CFG_OR_TIMING_FLASH)
-#define CFG_OR0_PRELIM	(CFG_PRELIM_OR_AM | CFG_OR_TIMING_FLASH)
-#define CFG_BR0_PRELIM	((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_PS_8 | BR_V )
+#define CONFIG_SYS_OR0_REMAP	(CONFIG_SYS_REMAP_OR_AM  | CONFIG_SYS_OR_TIMING_FLASH)
+#define CONFIG_SYS_OR0_PRELIM	(CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_FLASH)
+#define CONFIG_SYS_BR0_PRELIM	((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_PS_8 | BR_V )
 
 /*
  * BR3 and OR3 (SDRAM)
@@ -410,10 +410,10 @@
 #define	SDRAM_MAX_SIZE		(256 << 20)	/* max 256MB per bank	*/
 
 /* SDRAM timing: Multiplexed addresses, GPL5 output to GPL5_A (don't care)	*/
-#define CFG_OR_TIMING_SDRAM	(OR_CSNT_SAM | OR_G5LS)
+#define CONFIG_SYS_OR_TIMING_SDRAM	(OR_CSNT_SAM | OR_G5LS)
 
-#define CFG_OR3_PRELIM	((0xFFFFFFFFLU & ~(SDRAM_MAX_SIZE - 1)) | CFG_OR_TIMING_SDRAM)
-#define CFG_BR3_PRELIM	((SDRAM_BASE3_PRELIM & BR_BA_MSK) | BR_MS_UPMB | BR_PS_32 | BR_V)
+#define CONFIG_SYS_OR3_PRELIM	((0xFFFFFFFFLU & ~(SDRAM_MAX_SIZE - 1)) | CONFIG_SYS_OR_TIMING_SDRAM)
+#define CONFIG_SYS_BR3_PRELIM	((SDRAM_BASE3_PRELIM & BR_BA_MSK) | BR_MS_UPMB | BR_PS_32 | BR_V)
 
 /*
  * Memory Periodic Timer Prescaler
@@ -447,13 +447,13 @@
  */
 
 #if   MPC8XX_HZ == 120000000
-#define CFG_MAMR_PTA		 234
+#define CONFIG_SYS_MAMR_PTA		 234
 #elif MPC8XX_HZ == 100000000
-#define CFG_MAMR_PTA		 195
+#define CONFIG_SYS_MAMR_PTA		 195
 #elif MPC8XX_HZ ==  80000000
-#define CFG_MAMR_PTA		 156
+#define CONFIG_SYS_MAMR_PTA		 156
 #elif MPC8XX_HZ ==  50000000
-#define CFG_MAMR_PTA		  98
+#define CONFIG_SYS_MAMR_PTA		  98
 #else
 #error Unknown frequency
 #endif
@@ -464,27 +464,27 @@
  * (= 64 ms / 2K = 125 / quad bursts).
  * For a simpler initialization, 15.6 us is used instead.
  *
- * #define CFG_MPTPR_2BK_2K	MPTPR_PTP_DIV32		for 2 banks
- * #define CFG_MPTPR_1BK_2K	MPTPR_PTP_DIV64		for 1 bank
+ * #define CONFIG_SYS_MPTPR_2BK_2K	MPTPR_PTP_DIV32		for 2 banks
+ * #define CONFIG_SYS_MPTPR_1BK_2K	MPTPR_PTP_DIV64		for 1 bank
  */
-#define CFG_MPTPR_2BK_4K	MPTPR_PTP_DIV16		/* setting for 2 banks	*/
-#define CFG_MPTPR_1BK_4K	MPTPR_PTP_DIV32		/* setting for 1 bank	*/
+#define CONFIG_SYS_MPTPR_2BK_4K	MPTPR_PTP_DIV16		/* setting for 2 banks	*/
+#define CONFIG_SYS_MPTPR_1BK_4K	MPTPR_PTP_DIV32		/* setting for 1 bank	*/
 
 /* refresh rate 7.8 us (= 64 ms / 8K = 31.2 / quad bursts) for 256 MBit		*/
-#define CFG_MPTPR_2BK_8K	MPTPR_PTP_DIV8		/* setting for 2 banks	*/
-#define CFG_MPTPR_1BK_8K	MPTPR_PTP_DIV16		/* setting for 1 bank	*/
+#define CONFIG_SYS_MPTPR_2BK_8K	MPTPR_PTP_DIV8		/* setting for 2 banks	*/
+#define CONFIG_SYS_MPTPR_1BK_8K	MPTPR_PTP_DIV16		/* setting for 1 bank	*/
 
 /*
  * MAMR settings for SDRAM
  */
 
 /* 8 column SDRAM */
-#define CFG_MAMR_8COL	((CFG_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
+#define CONFIG_SYS_MAMR_8COL	((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
 			 MAMR_AMA_TYPE_0 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A11 |	\
 			 MAMR_RLFA_1X	 | MAMR_WLFA_1X	   | MAMR_TLFA_4X)
 
 /* 9 column SDRAM */
-#define CFG_MAMR_9COL	((CFG_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
+#define CONFIG_SYS_MAMR_9COL	((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
 			 MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 |	\
 			 MAMR_RLFA_1X	 | MAMR_WLFA_1X	   | MAMR_TLFA_4X)
 
@@ -496,8 +496,6 @@
 #define	BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH	*/
 #define BOOTFLAG_WARM	0x02		/* Software reboot			*/
 
-#define CONFIG_ARTOS			/* include ARTOS support */
-
 #define CONFIG_LAST_STAGE_INIT		/* needed to reset the damn phys */
 
 /***********************************************************************************************************
@@ -622,11 +620,11 @@
 
 /* NAND */
 #define CONFIG_NAND_LEGACY
-#define CFG_NAND_BASE			NAND_BASE
+#define CONFIG_SYS_NAND_BASE			NAND_BASE
 #define CONFIG_MTD_NAND_VERIFY_WRITE
 #define CONFIG_MTD_NAND_UNSAFE
 
-#define CFG_MAX_NAND_DEVICE		1
+#define CONFIG_SYS_MAX_NAND_DEVICE		1
 /* #define NAND_NO_RB */
 
 #define SECTORSIZE		512
@@ -640,38 +638,38 @@
 /* ALE = PD3, CLE = PD4, CE = PD5, F_RY_BY = PC13 */
 #define NAND_DISABLE_CE(nand) \
 	do { \
-		(((volatile immap_t *)CFG_IMMR)->im_ioport.iop_pddat) |=  (1 << (15 - 5)); \
+		(((volatile immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pddat) |=  (1 << (15 - 5)); \
 	} while(0)
 
 #define NAND_ENABLE_CE(nand) \
 	do { \
-		(((volatile immap_t *)CFG_IMMR)->im_ioport.iop_pddat) &= ~(1 << (15 - 5)); \
+		(((volatile immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pddat) &= ~(1 << (15 - 5)); \
 	} while(0)
 
 #define NAND_CTL_CLRALE(nandptr) \
 	do { \
-		(((volatile immap_t *)CFG_IMMR)->im_ioport.iop_pddat) &= ~(1 << (15 - 3)); \
+		(((volatile immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pddat) &= ~(1 << (15 - 3)); \
 	} while(0)
 
 #define NAND_CTL_SETALE(nandptr) \
 	do { \
-		(((volatile immap_t *)CFG_IMMR)->im_ioport.iop_pddat) |=  (1 << (15 - 3)); \
+		(((volatile immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pddat) |=  (1 << (15 - 3)); \
 	} while(0)
 
 #define NAND_CTL_CLRCLE(nandptr) \
 	do { \
-		(((volatile immap_t *)CFG_IMMR)->im_ioport.iop_pddat) &= ~(1 << (15 - 4)); \
+		(((volatile immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pddat) &= ~(1 << (15 - 4)); \
 	} while(0)
 
 #define NAND_CTL_SETCLE(nandptr) \
 	do { \
-		(((volatile immap_t *)CFG_IMMR)->im_ioport.iop_pddat) |=  (1 << (15 - 4)); \
+		(((volatile immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pddat) |=  (1 << (15 - 4)); \
 	} while(0)
 
 #ifndef NAND_NO_RB
 #define NAND_WAIT_READY(nand) \
 	do { \
-		while ((((volatile immap_t *)CFG_IMMR)->im_ioport.iop_pcdat & (1 << (15 - 13))) == 0) { \
+		while ((((volatile immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pcdat & (1 << (15 - 13))) == 0) { \
 			WATCHDOG_RESET(); \
 		} \
 	} while (0)
@@ -720,8 +718,8 @@
 
 /*****************************************************************************/
 
-#define CFG_DIRECT_FLASH_TFTP
-#define CFG_DIRECT_NAND_TFTP
+#define CONFIG_SYS_DIRECT_FLASH_TFTP
+#define CONFIG_SYS_DIRECT_NAND_TFTP
 
 /*****************************************************************************/
 
@@ -731,14 +729,14 @@
  *-----------------------------------------------------------------------
  */
 
-#define CFG_PCMCIA_MEM_ADDR	(0xE0000000)
-#define CFG_PCMCIA_MEM_SIZE	( 64 << 20 )
-#define CFG_PCMCIA_DMA_ADDR	(0xE4000000)
-#define CFG_PCMCIA_DMA_SIZE	( 64 << 20 )
-#define CFG_PCMCIA_ATTRB_ADDR	(0xE8000000)
-#define CFG_PCMCIA_ATTRB_SIZE	( 64 << 20 )
-#define CFG_PCMCIA_IO_ADDR	(0xEC000000)
-#define CFG_PCMCIA_IO_SIZE	( 64 << 20 )
+#define CONFIG_SYS_PCMCIA_MEM_ADDR	(0xE0000000)
+#define CONFIG_SYS_PCMCIA_MEM_SIZE	( 64 << 20 )
+#define CONFIG_SYS_PCMCIA_DMA_ADDR	(0xE4000000)
+#define CONFIG_SYS_PCMCIA_DMA_SIZE	( 64 << 20 )
+#define CONFIG_SYS_PCMCIA_ATTRB_ADDR	(0xE8000000)
+#define CONFIG_SYS_PCMCIA_ATTRB_SIZE	( 64 << 20 )
+#define CONFIG_SYS_PCMCIA_IO_ADDR	(0xEC000000)
+#define CONFIG_SYS_PCMCIA_IO_SIZE	( 64 << 20 )
 
 /*-----------------------------------------------------------------------
  * IDE/ATA stuff (Supports IDE harddisk on PCMCIA Adapter)
@@ -751,21 +749,21 @@
 #undef	CONFIG_IDE_LED			/* LED   for ide not supported	*/
 #undef	CONFIG_IDE_RESET		/* reset for ide not supported	*/
 
-#define CFG_IDE_MAXBUS		1	/* max. 1 IDE bus		*/
-#define CFG_IDE_MAXDEVICE	1	/* max. 1 drive per IDE bus	*/
+#define CONFIG_SYS_IDE_MAXBUS		1	/* max. 1 IDE bus		*/
+#define CONFIG_SYS_IDE_MAXDEVICE	1	/* max. 1 drive per IDE bus	*/
 
-#define CFG_ATA_IDE0_OFFSET	0x0000
+#define CONFIG_SYS_ATA_IDE0_OFFSET	0x0000
 
-#define CFG_ATA_BASE_ADDR	CFG_PCMCIA_MEM_ADDR
+#define CONFIG_SYS_ATA_BASE_ADDR	CONFIG_SYS_PCMCIA_MEM_ADDR
 
 /* Offset for data I/O			*/
-#define CFG_ATA_DATA_OFFSET	(CFG_PCMCIA_MEM_SIZE + 0x320)
+#define CONFIG_SYS_ATA_DATA_OFFSET	(CONFIG_SYS_PCMCIA_MEM_SIZE + 0x320)
 
 /* Offset for normal register accesses	*/
-#define CFG_ATA_REG_OFFSET	(2 * CFG_PCMCIA_MEM_SIZE + 0x320)
+#define CONFIG_SYS_ATA_REG_OFFSET	(2 * CONFIG_SYS_PCMCIA_MEM_SIZE + 0x320)
 
 /* Offset for alternate registers	*/
-#define CFG_ATA_ALT_OFFSET	0x0100
+#define CONFIG_SYS_ATA_ALT_OFFSET	0x0100
 
 #define CONFIG_MAC_PARTITION
 #define CONFIG_DOS_PARTITION
@@ -777,7 +775,7 @@
 #define CONFIG_CDP_DEVICE_ID_PREFIX	"NT"	/* netta */
 #define CONFIG_CDP_PORT_ID		"eth%d"
 #define CONFIG_CDP_CAPABILITIES		0x00000010
-#define CONFIG_CDP_VERSION		"u-boot 1.0" " " __DATE__ " " __TIME__
+#define CONFIG_CDP_VERSION		"u-boot 1.0" " " U_BOOT_DATE " " U_BOOT_TIME
 #define CONFIG_CDP_PLATFORM		"Intracom NetTA"
 #define CONFIG_CDP_TRIGGER		0x20020001
 #define CONFIG_CDP_POWER_CONSUMPTION	4300	/* 90 mA @ 48V */
diff --git a/include/configs/NETTA2.h b/include/configs/NETTA2.h
index 9a1f1d6da..70995faed 100644
--- a/include/configs/NETTA2.h
+++ b/include/configs/NETTA2.h
@@ -73,7 +73,7 @@
 
 #define CONFIG_AUTOSCRIPT
 #define CONFIG_LOADS_ECHO	0	/* echo off for serial download	*/
-#undef	CFG_LOADS_BAUD_CHANGE		/* don't allow baudrate change	*/
+#undef	CONFIG_SYS_LOADS_BAUD_CHANGE		/* don't allow baudrate change	*/
 
 #undef	CONFIG_WATCHDOG			/* watchdog disabled		*/
 
@@ -100,7 +100,7 @@
 
 #define	CONFIG_NET_MULTI	1	/* the only way to get the FEC in */
 #define	FEC_ENET		1	/* eth.c needs it that way... */
-#undef CFG_DISCOVER_PHY
+#undef CONFIG_SYS_DISCOVER_PHY
 #define CONFIG_MII		1
 #define CONFIG_MII_INIT		1
 #define CONFIG_RMII		1	/* use RMII interface */
@@ -134,29 +134,29 @@
 /*
  * Miscellaneous configurable options
  */
-#define	CFG_LONGHELP			/* undef to save memory		*/
-#define	CFG_PROMPT	"=> "		/* Monitor Command Prompt	*/
+#define	CONFIG_SYS_LONGHELP			/* undef to save memory		*/
+#define	CONFIG_SYS_PROMPT	"=> "		/* Monitor Command Prompt	*/
 
-#define CFG_HUSH_PARSER	1
-#define CFG_PROMPT_HUSH_PS2	"> "
+#define CONFIG_SYS_HUSH_PARSER	1
+#define CONFIG_SYS_PROMPT_HUSH_PS2	"> "
 
 #if defined(CONFIG_CMD_KGDB)
-#define	CFG_CBSIZE	1024		/* Console I/O Buffer Size	*/
+#define	CONFIG_SYS_CBSIZE	1024		/* Console I/O Buffer Size	*/
 #else
-#define	CFG_CBSIZE	256		/* Console I/O Buffer Size	*/
+#define	CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size	*/
 #endif
-#define	CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define	CFG_MAXARGS	16		/* max number of command args	*/
-#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+#define	CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define	CONFIG_SYS_MAXARGS	16		/* max number of command args	*/
+#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
 
-#define CFG_MEMTEST_START	0x0300000	/* memtest works on	*/
-#define CFG_MEMTEST_END		0x0700000	/* 3 ... 7 MB in DRAM	*/
+#define CONFIG_SYS_MEMTEST_START	0x0300000	/* memtest works on	*/
+#define CONFIG_SYS_MEMTEST_END		0x0700000	/* 3 ... 7 MB in DRAM	*/
 
-#define	CFG_LOAD_ADDR		0x100000	/* default load address	*/
+#define	CONFIG_SYS_LOAD_ADDR		0x100000	/* default load address	*/
 
-#define	CFG_HZ		1000		/* decrementer freq: 1 ms ticks	*/
+#define	CONFIG_SYS_HZ		1000		/* decrementer freq: 1 ms ticks	*/
 
-#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
 
 /*
  * Low Level Configuration Settings
@@ -166,74 +166,74 @@
 /*-----------------------------------------------------------------------
  * Internal Memory Mapped Register
  */
-#define CFG_IMMR		0xFF000000
+#define CONFIG_SYS_IMMR		0xFF000000
 
 /*-----------------------------------------------------------------------
  * Definitions for initial stack pointer and data area (in DPRAM)
  */
-#define CFG_INIT_RAM_ADDR	CFG_IMMR
-#define	CFG_INIT_RAM_END	0x3000	/* End of used area in DPRAM	*/
-#define	CFG_GBL_DATA_SIZE	64  /* size in bytes reserved for initial data */
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define	CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_IMMR
+#define	CONFIG_SYS_INIT_RAM_END	0x3000	/* End of used area in DPRAM	*/
+#define	CONFIG_SYS_GBL_DATA_SIZE	64  /* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define	CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
 /*-----------------------------------------------------------------------
  * Start addresses for the final memory configuration
  * (Set up by the startup code)
- * Please note that CFG_SDRAM_BASE _must_ start at 0
+ * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
  */
-#define	CFG_SDRAM_BASE		0x00000000
-#define CFG_FLASH_BASE		0x40000000
+#define	CONFIG_SYS_SDRAM_BASE		0x00000000
+#define CONFIG_SYS_FLASH_BASE		0x40000000
 #if defined(DEBUG)
-#define	CFG_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor	*/
+#define	CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor	*/
 #else
-#define	CFG_MONITOR_LEN		(192 << 10)	/* Reserve 192 kB for Monitor	*/
+#define	CONFIG_SYS_MONITOR_LEN		(192 << 10)	/* Reserve 192 kB for Monitor	*/
 #endif
-#define CFG_MONITOR_BASE	CFG_FLASH_BASE
-#define	CFG_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/
+#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_FLASH_BASE
+#define	CONFIG_SYS_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/
 #if CONFIG_NETTA2_VERSION == 2
-#define CFG_FLASH_BASE4		0x40080000
+#define CONFIG_SYS_FLASH_BASE4		0x40080000
 #endif
 
-#define CFG_RESET_ADDRESS   0x80000000
+#define CONFIG_SYS_RESET_ADDRESS   0x80000000
 
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define	CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux	*/
+#define	CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux	*/
 
 /*-----------------------------------------------------------------------
  * FLASH organization
  */
 #if CONFIG_NETTA2_VERSION == 1
-#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
+#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
 #elif CONFIG_NETTA2_VERSION == 2
-#define CFG_MAX_FLASH_BANKS	2	/* max number of memory banks		*/
+#define CONFIG_SYS_MAX_FLASH_BANKS	2	/* max number of memory banks		*/
 #endif
-#define CFG_MAX_FLASH_SECT	8	/* max number of sectors on one chip	*/
+#define CONFIG_SYS_MAX_FLASH_SECT	8	/* max number of sectors on one chip	*/
 
-#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
-#define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
+#define CONFIG_SYS_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
+#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
 
-#define	CFG_ENV_IS_IN_FLASH	1
-#define CFG_ENV_SECT_SIZE	0x10000
+#define	CONFIG_ENV_IS_IN_FLASH	1
+#define CONFIG_ENV_SECT_SIZE	0x10000
 
-#define	CFG_ENV_ADDR		(CFG_FLASH_BASE + 0x60000)
-#define CFG_ENV_OFFSET		0
-#define	CFG_ENV_SIZE		0x4000
+#define	CONFIG_ENV_ADDR		(CONFIG_SYS_FLASH_BASE + 0x60000)
+#define CONFIG_ENV_OFFSET		0
+#define	CONFIG_ENV_SIZE		0x4000
 
-#define CFG_ENV_ADDR_REDUND	(CFG_FLASH_BASE + 0x70000)
-#define CFG_ENV_OFFSET_REDUND	0
-#define CFG_ENV_SIZE_REDUND	CFG_ENV_SIZE
+#define CONFIG_ENV_ADDR_REDUND	(CONFIG_SYS_FLASH_BASE + 0x70000)
+#define CONFIG_ENV_OFFSET_REDUND	0
+#define CONFIG_ENV_SIZE_REDUND	CONFIG_ENV_SIZE
 
 /*-----------------------------------------------------------------------
  * Cache Configuration
  */
-#define CFG_CACHELINE_SIZE	16	/* For all MPC8xx CPUs			*/
+#define CONFIG_SYS_CACHELINE_SIZE	16	/* For all MPC8xx CPUs			*/
 #if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT	4	/* log base 2 of the above value	*/
+#define CONFIG_SYS_CACHELINE_SHIFT	4	/* log base 2 of the above value	*/
 #endif
 
 /*-----------------------------------------------------------------------
@@ -243,10 +243,10 @@
  * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze
  */
 #if defined(CONFIG_WATCHDOG)
-#define CFG_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
+#define CONFIG_SYS_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
 			 SYPCR_SWE  | SYPCR_SWRI| SYPCR_SWP)
 #else
-#define CFG_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
+#define CONFIG_SYS_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
 #endif
 
 /*-----------------------------------------------------------------------
@@ -255,9 +255,9 @@
  * PCMCIA config., multi-function pin tri-state
  */
 #ifndef	CONFIG_CAN_DRIVER
-#define CFG_SIUMCR	(SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_MLRC01 | SIUMCR_FRC)
+#define CONFIG_SYS_SIUMCR	(SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_MLRC01 | SIUMCR_FRC)
 #else	/* we must activate GPL5 in the SIUMCR for CAN */
-#define CFG_SIUMCR	(SIUMCR_DBGC11 | SIUMCR_DBPC00 | SIUMCR_MLRC01 | SIUMCR_FRC)
+#define CONFIG_SYS_SIUMCR	(SIUMCR_DBGC11 | SIUMCR_DBPC00 | SIUMCR_MLRC01 | SIUMCR_FRC)
 #endif	/* CONFIG_CAN_DRIVER */
 
 /*-----------------------------------------------------------------------
@@ -265,20 +265,20 @@
  *-----------------------------------------------------------------------
  * Clear Reference Interrupt Status, Timebase freezing enabled
  */
-#define CFG_TBSCR	(TBSCR_REFA | TBSCR_REFB | TBSCR_TBF)
+#define CONFIG_SYS_TBSCR	(TBSCR_REFA | TBSCR_REFB | TBSCR_TBF)
 
 /*-----------------------------------------------------------------------
  * RTCSC - Real-Time Clock Status and Control Register		11-27
  *-----------------------------------------------------------------------
  */
-#define CFG_RTCSC	(RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE)
+#define CONFIG_SYS_RTCSC	(RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE)
 
 /*-----------------------------------------------------------------------
  * PISCR - Periodic Interrupt Status and Control		11-31
  *-----------------------------------------------------------------------
  * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
  */
-#define CFG_PISCR	(PISCR_PS | PISCR_PITF)
+#define CONFIG_SYS_PISCR	(PISCR_PS | PISCR_PITF)
 
 /*-----------------------------------------------------------------------
  * PLPRCR - PLL, Low-Power, and Reset Control Register		15-30
@@ -291,27 +291,27 @@
 #if CONFIG_XIN == 10000000
 
 #if MPC8XX_HZ == 120000000
-#define CFG_PLPRCR	((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
+#define CONFIG_SYS_PLPRCR	((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
 			 (0 << PLPRCR_S_SHIFT) | (12 << PLPRCR_MFI_SHIFT) | (0 << PLPRCR_PDF_SHIFT) | \
 			 PLPRCR_TEXPS)
 #elif MPC8XX_HZ == 100000000
-#define CFG_PLPRCR	((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
+#define CONFIG_SYS_PLPRCR	((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
 			 (0 << PLPRCR_S_SHIFT) | (10 << PLPRCR_MFI_SHIFT) | (0 << PLPRCR_PDF_SHIFT) | \
 			 PLPRCR_TEXPS)
 #elif MPC8XX_HZ == 50000000
-#define CFG_PLPRCR	((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
+#define CONFIG_SYS_PLPRCR	((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
 			 (1 << PLPRCR_S_SHIFT) | (8 << PLPRCR_MFI_SHIFT) | (3 << PLPRCR_PDF_SHIFT) | \
 			 PLPRCR_TEXPS)
 #elif MPC8XX_HZ == 25000000
-#define CFG_PLPRCR	((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
+#define CONFIG_SYS_PLPRCR	((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
 			 (2 << PLPRCR_S_SHIFT) | (8 << PLPRCR_MFI_SHIFT) | (3 << PLPRCR_PDF_SHIFT) | \
 			 PLPRCR_TEXPS)
 #elif MPC8XX_HZ == 40000000
-#define CFG_PLPRCR	((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
+#define CONFIG_SYS_PLPRCR	((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
 			 (1 << PLPRCR_S_SHIFT) | (8 << PLPRCR_MFI_SHIFT) | (4 << PLPRCR_PDF_SHIFT) | \
 			 PLPRCR_TEXPS)
 #elif MPC8XX_HZ == 75000000
-#define CFG_PLPRCR	((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
+#define CONFIG_SYS_PLPRCR	((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
 			 (1 << PLPRCR_S_SHIFT) | (15 << PLPRCR_MFI_SHIFT) | (0 << PLPRCR_PDF_SHIFT) | \
 			 PLPRCR_TEXPS)
 #else
@@ -321,15 +321,15 @@
 #elif CONFIG_XIN == 50000000
 
 #if MPC8XX_HZ == 120000000
-#define CFG_PLPRCR	((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
+#define CONFIG_SYS_PLPRCR	((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
 			 (0 << PLPRCR_S_SHIFT) | (12 << PLPRCR_MFI_SHIFT) | (4 << PLPRCR_PDF_SHIFT) | \
 			 PLPRCR_TEXPS)
 #elif MPC8XX_HZ == 100000000
-#define CFG_PLPRCR	((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
+#define CONFIG_SYS_PLPRCR	((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
 			 (0 << PLPRCR_S_SHIFT) | (6 << PLPRCR_MFI_SHIFT) | (2 << PLPRCR_PDF_SHIFT) | \
 			 PLPRCR_TEXPS)
 #elif MPC8XX_HZ ==  66666666
-#define CFG_PLPRCR	((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
+#define CONFIG_SYS_PLPRCR	((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
 			 (1 << PLPRCR_S_SHIFT) | (8 << PLPRCR_MFI_SHIFT) | (2 << PLPRCR_PDF_SHIFT) | \
 			 PLPRCR_TEXPS)
 #else
@@ -354,12 +354,12 @@
 
 #define SCCR_MASK	SCCR_EBDF11
 #if MPC8XX_HZ > 66666666
-#define CFG_SCCR	(/* SCCR_TBS     | */ SCCR_CRQEN | \
+#define CONFIG_SYS_SCCR	(/* SCCR_TBS     | */ SCCR_CRQEN | \
 			 SCCR_COM00   | SCCR_DFSYNC00 | SCCR_DFBRG00  | \
 			 SCCR_DFNL000 | SCCR_DFNH000  | SCCR_DFLCD000 | \
 			 SCCR_DFALCD00 | SCCR_EBDF01)
 #else
-#define CFG_SCCR	(/* SCCR_TBS     | */ SCCR_CRQEN | \
+#define CONFIG_SYS_SCCR	(/* SCCR_TBS     | */ SCCR_CRQEN | \
 			 SCCR_COM00   | SCCR_DFSYNC00 | SCCR_DFBRG00  | \
 			 SCCR_DFNL000 | SCCR_DFNH000  | SCCR_DFLCD000 | \
 			 SCCR_DFALCD00)
@@ -370,8 +370,8 @@
  *-----------------------------------------------------------------------
  *
  */
-/*#define	CFG_DER	0x2002000F*/
-#define CFG_DER	0
+/*#define	CONFIG_SYS_DER	0x2002000F*/
+#define CONFIG_SYS_DER	0
 
 /*
  * Init Memory Controller:
@@ -385,23 +385,23 @@
  * restrict access enough to keep SRAM working (if any)
  * but not too much to meddle with FLASH accesses
  */
-#define CFG_REMAP_OR_AM		0x80000000	/* OR addr mask */
-#define CFG_PRELIM_OR_AM	0xE0000000	/* OR addr mask */
+#define CONFIG_SYS_REMAP_OR_AM		0x80000000	/* OR addr mask */
+#define CONFIG_SYS_PRELIM_OR_AM	0xE0000000	/* OR addr mask */
 
 /* FLASH timing: ACS = 11, TRLX = 0, CSNT = 1, SCY = 5, EHTR = 1	*/
-#define CFG_OR_TIMING_FLASH	(OR_CSNT_SAM  | OR_BI | OR_SCY_5_CLK | OR_TRLX)
+#define CONFIG_SYS_OR_TIMING_FLASH	(OR_CSNT_SAM  | OR_BI | OR_SCY_5_CLK | OR_TRLX)
 
-#define CFG_OR0_REMAP	(CFG_REMAP_OR_AM  | CFG_OR_TIMING_FLASH)
-#define CFG_OR0_PRELIM	(CFG_PRELIM_OR_AM | CFG_OR_TIMING_FLASH)
-#define CFG_BR0_PRELIM	((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_PS_8 | BR_V )
+#define CONFIG_SYS_OR0_REMAP	(CONFIG_SYS_REMAP_OR_AM  | CONFIG_SYS_OR_TIMING_FLASH)
+#define CONFIG_SYS_OR0_PRELIM	(CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_FLASH)
+#define CONFIG_SYS_BR0_PRELIM	((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_PS_8 | BR_V )
 
 #if CONFIG_NETTA2_VERSION == 2
 
 #define FLASH_BASE4_PRELIM	0x40080000	/* FLASH bank #1	*/
 
-#define CFG_OR4_REMAP	(CFG_REMAP_OR_AM  | CFG_OR_TIMING_FLASH)
-#define CFG_OR4_PRELIM	(CFG_PRELIM_OR_AM | CFG_OR_TIMING_FLASH)
-#define CFG_BR4_PRELIM	((FLASH_BASE4_PRELIM & BR_BA_MSK) | BR_PS_8 | BR_V )
+#define CONFIG_SYS_OR4_REMAP	(CONFIG_SYS_REMAP_OR_AM  | CONFIG_SYS_OR_TIMING_FLASH)
+#define CONFIG_SYS_OR4_PRELIM	(CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_FLASH)
+#define CONFIG_SYS_BR4_PRELIM	((FLASH_BASE4_PRELIM & BR_BA_MSK) | BR_PS_8 | BR_V )
 
 #endif
 
@@ -413,10 +413,10 @@
 #define	SDRAM_MAX_SIZE		(256 << 20)	/* max 256MB per bank	*/
 
 /* SDRAM timing: Multiplexed addresses, GPL5 output to GPL5_A (don't care)	*/
-#define CFG_OR_TIMING_SDRAM	(OR_CSNT_SAM | OR_G5LS)
+#define CONFIG_SYS_OR_TIMING_SDRAM	(OR_CSNT_SAM | OR_G5LS)
 
-#define CFG_OR3_PRELIM	((0xFFFFFFFFLU & ~(SDRAM_MAX_SIZE - 1)) | CFG_OR_TIMING_SDRAM)
-#define CFG_BR3_PRELIM	((SDRAM_BASE3_PRELIM & BR_BA_MSK) | BR_MS_UPMB | BR_PS_32 | BR_V)
+#define CONFIG_SYS_OR3_PRELIM	((0xFFFFFFFFLU & ~(SDRAM_MAX_SIZE - 1)) | CONFIG_SYS_OR_TIMING_SDRAM)
+#define CONFIG_SYS_BR3_PRELIM	((SDRAM_BASE3_PRELIM & BR_BA_MSK) | BR_MS_UPMB | BR_PS_32 | BR_V)
 
 /*
  * Memory Periodic Timer Prescaler
@@ -449,34 +449,34 @@
  * 80 Mhz => 80.000.000 / Divider = 156
  */
 
-#define CFG_MAMR_PTA		 234
+#define CONFIG_SYS_MAMR_PTA		 234
 
 /*
  * For 16 MBit, refresh rates could be 31.3 us
  * (= 64 ms / 2K = 125 / quad bursts).
  * For a simpler initialization, 15.6 us is used instead.
  *
- * #define CFG_MPTPR_2BK_2K	MPTPR_PTP_DIV32		for 2 banks
- * #define CFG_MPTPR_1BK_2K	MPTPR_PTP_DIV64		for 1 bank
+ * #define CONFIG_SYS_MPTPR_2BK_2K	MPTPR_PTP_DIV32		for 2 banks
+ * #define CONFIG_SYS_MPTPR_1BK_2K	MPTPR_PTP_DIV64		for 1 bank
  */
-#define CFG_MPTPR_2BK_4K	MPTPR_PTP_DIV16		/* setting for 2 banks	*/
-#define CFG_MPTPR_1BK_4K	MPTPR_PTP_DIV32		/* setting for 1 bank	*/
+#define CONFIG_SYS_MPTPR_2BK_4K	MPTPR_PTP_DIV16		/* setting for 2 banks	*/
+#define CONFIG_SYS_MPTPR_1BK_4K	MPTPR_PTP_DIV32		/* setting for 1 bank	*/
 
 /* refresh rate 7.8 us (= 64 ms / 8K = 31.2 / quad bursts) for 256 MBit		*/
-#define CFG_MPTPR_2BK_8K	MPTPR_PTP_DIV8		/* setting for 2 banks	*/
-#define CFG_MPTPR_1BK_8K	MPTPR_PTP_DIV16		/* setting for 1 bank	*/
+#define CONFIG_SYS_MPTPR_2BK_8K	MPTPR_PTP_DIV8		/* setting for 2 banks	*/
+#define CONFIG_SYS_MPTPR_1BK_8K	MPTPR_PTP_DIV16		/* setting for 1 bank	*/
 
 /*
  * MAMR settings for SDRAM
  */
 
 /* 8 column SDRAM */
-#define CFG_MAMR_8COL	((CFG_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
+#define CONFIG_SYS_MAMR_8COL	((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
 			 MAMR_AMA_TYPE_0 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A11 |	\
 			 MAMR_RLFA_1X	 | MAMR_WLFA_1X	   | MAMR_TLFA_4X)
 
 /* 9 column SDRAM */
-#define CFG_MAMR_9COL	((CFG_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
+#define CONFIG_SYS_MAMR_9COL	((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
 			 MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 |	\
 			 MAMR_RLFA_1X	 | MAMR_WLFA_1X	   | MAMR_TLFA_4X)
 
@@ -488,8 +488,6 @@
 #define	BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH	*/
 #define BOOTFLAG_WARM	0x02		/* Software reboot			*/
 
-#define CONFIG_ARTOS			/* include ARTOS support */
-
 #define CONFIG_LAST_STAGE_INIT		/* needed to reset the damn phys */
 
 /****************************************************************/
@@ -504,12 +502,12 @@
 
 /* NAND */
 #define CONFIG_NAND_LEGACY
-#define CFG_NAND_BASE		NAND_BASE
+#define CONFIG_SYS_NAND_BASE		NAND_BASE
 #define CONFIG_MTD_NAND_ECC_JFFS2
 #define CONFIG_MTD_NAND_VERIFY_WRITE
 #define CONFIG_MTD_NAND_UNSAFE
 
-#define CFG_MAX_NAND_DEVICE	1
+#define CONFIG_SYS_MAX_NAND_DEVICE	1
 
 #define SECTORSIZE		512
 #define ADDR_COLUMN		1
@@ -522,39 +520,39 @@
 /* ALE = PD17, CLE = PE18, CE = PE20, F_RY_BY = PE31 */
 #define NAND_DISABLE_CE(nand) \
 	do { \
-		(((volatile immap_t *)CFG_IMMR)->im_cpm.cp_pedat) |=  (1 << (31 - 20)); \
+		(((volatile immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pedat) |=  (1 << (31 - 20)); \
 	} while(0)
 
 #define NAND_ENABLE_CE(nand) \
 	do { \
-		(((volatile immap_t *)CFG_IMMR)->im_cpm.cp_pedat) &= ~(1 << (31 - 20)); \
+		(((volatile immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pedat) &= ~(1 << (31 - 20)); \
 	} while(0)
 
 #define NAND_CTL_CLRALE(nandptr) \
 	do { \
-		(((volatile immap_t *)CFG_IMMR)->im_cpm.cp_pedat) &= ~(1 << (31 - 17)); \
+		(((volatile immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pedat) &= ~(1 << (31 - 17)); \
 	} while(0)
 
 #define NAND_CTL_SETALE(nandptr) \
 	do { \
-		(((volatile immap_t *)CFG_IMMR)->im_cpm.cp_pedat) |=  (1 << (31 - 17)); \
+		(((volatile immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pedat) |=  (1 << (31 - 17)); \
 	} while(0)
 
 #define NAND_CTL_CLRCLE(nandptr) \
 	do { \
-		(((volatile immap_t *)CFG_IMMR)->im_cpm.cp_pedat) &= ~(1 << (31 - 18)); \
+		(((volatile immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pedat) &= ~(1 << (31 - 18)); \
 	} while(0)
 
 #define NAND_CTL_SETCLE(nandptr) \
 	do { \
-		(((volatile immap_t *)CFG_IMMR)->im_cpm.cp_pedat) |=  (1 << (31 - 18)); \
+		(((volatile immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pedat) |=  (1 << (31 - 18)); \
 	} while(0)
 
 #if CONFIG_NETTA2_VERSION == 1
 #define NAND_WAIT_READY(nand) \
 	do { \
 		int _tries = 0; \
-		while ((((volatile immap_t *)CFG_IMMR)->im_cpm.cp_pedat & (1 << (31 - 31))) == 0) \
+		while ((((volatile immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pedat & (1 << (31 - 31))) == 0) \
 			if (++_tries > 100000) \
 				break; \
 	} while (0)
@@ -562,7 +560,7 @@
 #define NAND_WAIT_READY(nand) \
 	do { \
 		int _tries = 0; \
-		while ((((volatile immap_t *)CFG_IMMR)->im_ioport.iop_pcdat & (1 << (15 - 15))) == 0) \
+		while ((((volatile immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pcdat & (1 << (15 - 15))) == 0) \
 			if (++_tries > 100000) \
 				break; \
 	} while (0)
@@ -588,8 +586,8 @@
 
 /*****************************************************************************/
 
-#define CFG_DIRECT_FLASH_TFTP
-#define CFG_DIRECT_NAND_TFTP
+#define CONFIG_SYS_DIRECT_FLASH_TFTP
+#define CONFIG_SYS_DIRECT_NAND_TFTP
 
 /*****************************************************************************/
 
@@ -599,7 +597,7 @@
 #define STATUS_LED_BIT		0x00000080		/* bit 24 */
 #endif
 
-#define STATUS_LED_PERIOD	(CFG_HZ / 2)
+#define STATUS_LED_PERIOD	(CONFIG_SYS_HZ / 2)
 #define STATUS_LED_STATE	STATUS_LED_BLINKING
 
 #define STATUS_LED_ACTIVE	0		/* LED on for bit == 0	*/
@@ -614,15 +612,15 @@ typedef unsigned int led_id_t;
 
 #define __led_toggle(_msk) \
 	do { \
-		((volatile immap_t *)CFG_IMMR)->im_cpm.cp_pedat ^= (_msk); \
+		((volatile immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pedat ^= (_msk); \
 	} while(0)
 
 #define __led_set(_msk, _st) \
 	do { \
 		if ((_st)) \
-			((volatile immap_t *)CFG_IMMR)->im_cpm.cp_pedat |= (_msk); \
+			((volatile immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pedat |= (_msk); \
 		else \
-			((volatile immap_t *)CFG_IMMR)->im_cpm.cp_pedat &= ~(_msk); \
+			((volatile immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pedat &= ~(_msk); \
 	} while(0)
 
 #define __led_init(msk, st) __led_set(msk, st)
@@ -736,16 +734,15 @@ typedef unsigned int led_id_t;
 
 **************************************************************************************************/
 
-#define CFG_CONSOLE_IS_IN_ENV		1
-#define CFG_CONSOLE_OVERWRITE_ROUTINE	1
-#define CFG_CONSOLE_ENV_OVERWRITE	1
+#define CONFIG_SYS_CONSOLE_IS_IN_ENV		1
+#define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE	1
+#define CONFIG_SYS_CONSOLE_ENV_OVERWRITE	1
 
 /*************************************************************************************************/
 
 /* use board specific hardware */
 #undef	CONFIG_WATCHDOG			/* watchdog disabled		*/
 #define CONFIG_HW_WATCHDOG
-#define CONFIG_SHOW_ACTIVITY
 
 /*************************************************************************************************/
 
@@ -753,7 +750,7 @@ typedef unsigned int led_id_t;
 #define CONFIG_CDP_DEVICE_ID_PREFIX	"NT"	/* netta2 */
 #define CONFIG_CDP_PORT_ID		"eth%d"
 #define CONFIG_CDP_CAPABILITIES		0x00000010
-#define CONFIG_CDP_VERSION		"u-boot" " " __DATE__ " " __TIME__
+#define CONFIG_CDP_VERSION		"u-boot" " " U_BOOT_DATE " " U_BOOT_TIME
 #define CONFIG_CDP_PLATFORM		"Intracom NetTA2"
 #define CONFIG_CDP_TRIGGER		0x20020001
 #define CONFIG_CDP_POWER_CONSUMPTION	4300	/* 90 mA @ 48V */
diff --git a/include/configs/NETVIA.h b/include/configs/NETVIA.h
index c02959418..87c920f42 100644
--- a/include/configs/NETVIA.h
+++ b/include/configs/NETVIA.h
@@ -69,7 +69,7 @@
 	"bootm"
 
 #define CONFIG_LOADS_ECHO	0	/* echo off for serial download	*/
-#undef	CFG_LOADS_BAUD_CHANGE		/* don't allow baudrate change	*/
+#undef	CONFIG_SYS_LOADS_BAUD_CHANGE		/* don't allow baudrate change	*/
 
 #undef	CONFIG_WATCHDOG			/* watchdog disabled		*/
 
@@ -117,25 +117,25 @@
 /*
  * Miscellaneous configurable options
  */
-#define	CFG_LONGHELP			/* undef to save memory		*/
-#define	CFG_PROMPT	"=> "		/* Monitor Command Prompt	*/
+#define	CONFIG_SYS_LONGHELP			/* undef to save memory		*/
+#define	CONFIG_SYS_PROMPT	"=> "		/* Monitor Command Prompt	*/
 #if defined(CONFIG_CMD_KGDB)
-#define	CFG_CBSIZE	1024		/* Console I/O Buffer Size	*/
+#define	CONFIG_SYS_CBSIZE	1024		/* Console I/O Buffer Size	*/
 #else
-#define	CFG_CBSIZE	256		/* Console I/O Buffer Size	*/
+#define	CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size	*/
 #endif
-#define	CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define	CFG_MAXARGS	16		/* max number of command args	*/
-#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+#define	CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define	CONFIG_SYS_MAXARGS	16		/* max number of command args	*/
+#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
 
-#define CFG_MEMTEST_START	0x0300000	/* memtest works on	*/
-#define CFG_MEMTEST_END		0x0700000	/* 3 ... 7 MB in DRAM	*/
+#define CONFIG_SYS_MEMTEST_START	0x0300000	/* memtest works on	*/
+#define CONFIG_SYS_MEMTEST_END		0x0700000	/* 3 ... 7 MB in DRAM	*/
 
-#define	CFG_LOAD_ADDR		0x100000	/* default load address	*/
+#define	CONFIG_SYS_LOAD_ADDR		0x100000	/* default load address	*/
 
-#define	CFG_HZ		1000		/* decrementer freq: 1 ms ticks	*/
+#define	CONFIG_SYS_HZ		1000		/* decrementer freq: 1 ms ticks	*/
 
-#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
 
 /*
  * Low Level Configuration Settings
@@ -145,65 +145,65 @@
 /*-----------------------------------------------------------------------
  * Internal Memory Mapped Register
  */
-#define CFG_IMMR		0xFF000000
+#define CONFIG_SYS_IMMR		0xFF000000
 
 /*-----------------------------------------------------------------------
  * Definitions for initial stack pointer and data area (in DPRAM)
  */
-#define CFG_INIT_RAM_ADDR	CFG_IMMR
-#define	CFG_INIT_RAM_END	0x3000	/* End of used area in DPRAM	*/
-#define	CFG_GBL_DATA_SIZE	64  /* size in bytes reserved for initial data */
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define	CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_IMMR
+#define	CONFIG_SYS_INIT_RAM_END	0x3000	/* End of used area in DPRAM	*/
+#define	CONFIG_SYS_GBL_DATA_SIZE	64  /* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define	CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
 /*-----------------------------------------------------------------------
  * Start addresses for the final memory configuration
  * (Set up by the startup code)
- * Please note that CFG_SDRAM_BASE _must_ start at 0
+ * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
  */
-#define	CFG_SDRAM_BASE		0x00000000
-#define CFG_FLASH_BASE		0x40000000
+#define	CONFIG_SYS_SDRAM_BASE		0x00000000
+#define CONFIG_SYS_FLASH_BASE		0x40000000
 #if defined(DEBUG)
-#define	CFG_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor	*/
+#define	CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor	*/
 #else
-#define	CFG_MONITOR_LEN		(192 << 10)	/* Reserve 192 kB for Monitor	*/
+#define	CONFIG_SYS_MONITOR_LEN		(192 << 10)	/* Reserve 192 kB for Monitor	*/
 #endif
-#define CFG_MONITOR_BASE	CFG_FLASH_BASE
-#define	CFG_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/
+#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_FLASH_BASE
+#define	CONFIG_SYS_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/
 
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define	CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux	*/
+#define	CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux	*/
 
 /*-----------------------------------------------------------------------
  * FLASH organization
  */
-#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
-#define CFG_MAX_FLASH_SECT	8	/* max number of sectors on one chip	*/
+#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
+#define CONFIG_SYS_MAX_FLASH_SECT	8	/* max number of sectors on one chip	*/
 
-#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
-#define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
+#define CONFIG_SYS_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
+#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
 
-#define	CFG_ENV_IS_IN_FLASH	1
-#define CFG_ENV_SECT_SIZE	0x10000
+#define	CONFIG_ENV_IS_IN_FLASH	1
+#define CONFIG_ENV_SECT_SIZE	0x10000
 
-#define	CFG_ENV_ADDR		(CFG_FLASH_BASE + 0x60000)
-#define CFG_ENV_OFFSET		0
-#define	CFG_ENV_SIZE		0x4000
+#define	CONFIG_ENV_ADDR		(CONFIG_SYS_FLASH_BASE + 0x60000)
+#define CONFIG_ENV_OFFSET		0
+#define	CONFIG_ENV_SIZE		0x4000
 
-#define CFG_ENV_ADDR_REDUND	(CFG_FLASH_BASE + 0x70000)
-#define CFG_ENV_OFFSET_REDUND	0
-#define CFG_ENV_SIZE_REDUND	CFG_ENV_SIZE
+#define CONFIG_ENV_ADDR_REDUND	(CONFIG_SYS_FLASH_BASE + 0x70000)
+#define CONFIG_ENV_OFFSET_REDUND	0
+#define CONFIG_ENV_SIZE_REDUND	CONFIG_ENV_SIZE
 
 /*-----------------------------------------------------------------------
  * Cache Configuration
  */
-#define CFG_CACHELINE_SIZE	16	/* For all MPC8xx CPUs			*/
+#define CONFIG_SYS_CACHELINE_SIZE	16	/* For all MPC8xx CPUs			*/
 #if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT	4	/* log base 2 of the above value	*/
+#define CONFIG_SYS_CACHELINE_SHIFT	4	/* log base 2 of the above value	*/
 #endif
 
 /*-----------------------------------------------------------------------
@@ -213,10 +213,10 @@
  * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze
  */
 #if defined(CONFIG_WATCHDOG)
-#define CFG_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
+#define CONFIG_SYS_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
 			 SYPCR_SWE  | SYPCR_SWRI| SYPCR_SWP)
 #else
-#define CFG_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
+#define CONFIG_SYS_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
 #endif
 
 /*-----------------------------------------------------------------------
@@ -225,9 +225,9 @@
  * PCMCIA config., multi-function pin tri-state
  */
 #ifndef	CONFIG_CAN_DRIVER
-#define CFG_SIUMCR	(SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_MLRC01 | SIUMCR_FRC)
+#define CONFIG_SYS_SIUMCR	(SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_MLRC01 | SIUMCR_FRC)
 #else	/* we must activate GPL5 in the SIUMCR for CAN */
-#define CFG_SIUMCR	(SIUMCR_DBGC11 | SIUMCR_DBPC00 | SIUMCR_MLRC01 | SIUMCR_FRC)
+#define CONFIG_SYS_SIUMCR	(SIUMCR_DBGC11 | SIUMCR_DBPC00 | SIUMCR_MLRC01 | SIUMCR_FRC)
 #endif	/* CONFIG_CAN_DRIVER */
 
 /*-----------------------------------------------------------------------
@@ -235,20 +235,20 @@
  *-----------------------------------------------------------------------
  * Clear Reference Interrupt Status, Timebase freezing enabled
  */
-#define CFG_TBSCR	(TBSCR_REFA | TBSCR_REFB | TBSCR_TBF)
+#define CONFIG_SYS_TBSCR	(TBSCR_REFA | TBSCR_REFB | TBSCR_TBF)
 
 /*-----------------------------------------------------------------------
  * RTCSC - Real-Time Clock Status and Control Register		11-27
  *-----------------------------------------------------------------------
  */
-#define CFG_RTCSC	(RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE)
+#define CONFIG_SYS_RTCSC	(RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE)
 
 /*-----------------------------------------------------------------------
  * PISCR - Periodic Interrupt Status and Control		11-31
  *-----------------------------------------------------------------------
  * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
  */
-#define CFG_PISCR	(PISCR_PS | PISCR_PITF)
+#define CONFIG_SYS_PISCR	(PISCR_PS | PISCR_PITF)
 
 /*-----------------------------------------------------------------------
  * PLPRCR - PLL, Low-Power, and Reset Control Register		15-30
@@ -268,16 +268,16 @@
 
 #if CONFIG_8xx_GCLK_FREQ == 50000000
 
-#define CFG_PLPRCR	( ((5 - 1) << PLPRCR_MF_SHIFT) | PLPRCR_SPLSS | PLPRCR_TEXPS | PLPRCR_TMIST)
-#define CFG_SCCR	(SCCR_TBS     | \
+#define CONFIG_SYS_PLPRCR	( ((5 - 1) << PLPRCR_MF_SHIFT) | PLPRCR_SPLSS | PLPRCR_TEXPS | PLPRCR_TMIST)
+#define CONFIG_SYS_SCCR	(SCCR_TBS     | \
 			 SCCR_COM00   | SCCR_DFSYNC00 | SCCR_DFBRG00  | \
 			 SCCR_DFNL000 | SCCR_DFNH000  | SCCR_DFLCD000 | \
 			 SCCR_DFALCD00)
 
 #elif CONFIG_8xx_GCLK_FREQ == 80000000
 
-#define CFG_PLPRCR	( ((8 - 1) << PLPRCR_MF_SHIFT) | PLPRCR_SPLSS | PLPRCR_TEXPS | PLPRCR_TMIST)
-#define CFG_SCCR	(SCCR_TBS     | \
+#define CONFIG_SYS_PLPRCR	( ((8 - 1) << PLPRCR_MF_SHIFT) | PLPRCR_SPLSS | PLPRCR_TEXPS | PLPRCR_TMIST)
+#define CONFIG_SYS_SCCR	(SCCR_TBS     | \
 			 SCCR_COM00   | SCCR_DFSYNC00 | SCCR_DFBRG00  | \
 			 SCCR_DFNL000 | SCCR_DFNH000  | SCCR_DFLCD000 | \
 			 SCCR_DFALCD00 | SCCR_EBDF01)
@@ -289,8 +289,8 @@
  *-----------------------------------------------------------------------
  *
  */
-/*#define	CFG_DER	0x2002000F*/
-#define CFG_DER	0
+/*#define	CONFIG_SYS_DER	0x2002000F*/
+#define CONFIG_SYS_DER	0
 
 /*
  * Init Memory Controller:
@@ -304,15 +304,15 @@
  * restrict access enough to keep SRAM working (if any)
  * but not too much to meddle with FLASH accesses
  */
-#define CFG_REMAP_OR_AM		0x80000000	/* OR addr mask */
-#define CFG_PRELIM_OR_AM	0xE0000000	/* OR addr mask */
+#define CONFIG_SYS_REMAP_OR_AM		0x80000000	/* OR addr mask */
+#define CONFIG_SYS_PRELIM_OR_AM	0xE0000000	/* OR addr mask */
 
 /* FLASH timing: ACS = 11, TRLX = 0, CSNT = 1, SCY = 5, EHTR = 1	*/
-#define CFG_OR_TIMING_FLASH	(OR_CSNT_SAM  | OR_BI | OR_SCY_5_CLK | OR_TRLX)
+#define CONFIG_SYS_OR_TIMING_FLASH	(OR_CSNT_SAM  | OR_BI | OR_SCY_5_CLK | OR_TRLX)
 
-#define CFG_OR0_REMAP	(CFG_REMAP_OR_AM  | CFG_OR_TIMING_FLASH)
-#define CFG_OR0_PRELIM	(CFG_PRELIM_OR_AM | CFG_OR_TIMING_FLASH)
-#define CFG_BR0_PRELIM	((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_PS_8 | BR_V )
+#define CONFIG_SYS_OR0_REMAP	(CONFIG_SYS_REMAP_OR_AM  | CONFIG_SYS_OR_TIMING_FLASH)
+#define CONFIG_SYS_OR0_PRELIM	(CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_FLASH)
+#define CONFIG_SYS_BR0_PRELIM	((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_PS_8 | BR_V )
 
 /*
  * BR3 and OR3 (SDRAM)
@@ -322,27 +322,27 @@
 #define	SDRAM_MAX_SIZE		0x04000000	/* max 64 MB per bank	*/
 
 /* SDRAM timing: Multiplexed addresses, GPL5 output to GPL5_A (don't care)	*/
-#define CFG_OR_TIMING_SDRAM	(OR_CSNT_SAM | OR_G5LS)
+#define CONFIG_SYS_OR_TIMING_SDRAM	(OR_CSNT_SAM | OR_G5LS)
 
-#define CFG_OR3_PRELIM	((0xFFFFFFFFLU & ~(SDRAM_MAX_SIZE - 1)) | CFG_OR_TIMING_SDRAM)
-#define CFG_BR3_PRELIM	((SDRAM_BASE3_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_PS_32 | BR_V)
+#define CONFIG_SYS_OR3_PRELIM	((0xFFFFFFFFLU & ~(SDRAM_MAX_SIZE - 1)) | CONFIG_SYS_OR_TIMING_SDRAM)
+#define CONFIG_SYS_BR3_PRELIM	((SDRAM_BASE3_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_PS_32 | BR_V)
 
 /*
  * Memory Periodic Timer Prescaler
  */
 
 /* periodic timer for refresh */
-#define CFG_MAMR_PTA	208
+#define CONFIG_SYS_MAMR_PTA	208
 
 /* refresh rate 7.8 us (= 64 ms / 8K = 31.2 / quad bursts) for 256 MBit		*/
-#define CFG_MPTPR_1BK_8K	MPTPR_PTP_DIV16		/* setting for 1 bank	*/
+#define CONFIG_SYS_MPTPR_1BK_8K	MPTPR_PTP_DIV16		/* setting for 1 bank	*/
 
 /*
  * MAMR settings for SDRAM
  */
 
 /* 9 column SDRAM */
-#define CFG_MAMR_9COL	((CFG_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
+#define CONFIG_SYS_MAMR_9COL	((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
 			 MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 |	\
 			 MAMR_RLFA_1X	 | MAMR_WLFA_1X	   | MAMR_TLFA_4X)
 
@@ -357,8 +357,6 @@
 /* Ethernet at SCC2 */
 #define CONFIG_SCC2_ENET
 
-#define CONFIG_ARTOS			/* include ARTOS support */
-
 /****************************************************************/
 
 #define DSP_SIZE	0x00010000	/* 64K */
@@ -383,11 +381,11 @@
 #if defined(CONFIG_NETVIA_VERSION) && CONFIG_NETVIA_VERSION >= 2
 
 #define STATUS_LED_BIT		0x00000001		/* bit 31 */
-#define STATUS_LED_PERIOD	(CFG_HZ / 2)
+#define STATUS_LED_PERIOD	(CONFIG_SYS_HZ / 2)
 #define STATUS_LED_STATE	STATUS_LED_BLINKING
 
 #define STATUS_LED_BIT1		0x00000002		/* bit 30 */
-#define STATUS_LED_PERIOD1	(CFG_HZ / 2)
+#define STATUS_LED_PERIOD1	(CONFIG_SYS_HZ / 2)
 #define STATUS_LED_STATE1	STATUS_LED_OFF
 
 #define STATUS_LED_ACTIVE	0		/* LED on for bit == 0	*/
@@ -402,10 +400,10 @@
 #if defined(CONFIG_NETVIA_VERSION) && CONFIG_NETVIA_VERSION >= 2
 
 /* NAND */
-#define CFG_NAND_BASE			NAND_BASE
+#define CONFIG_SYS_NAND_BASE			NAND_BASE
 #define CONFIG_MTD_NAND_ECC_JFFS2
 
-#define CFG_MAX_NAND_DEVICE		1
+#define CONFIG_SYS_MAX_NAND_DEVICE		1
 
 #define SECTORSIZE		512
 #define ADDR_COLUMN		1
@@ -417,37 +415,37 @@
 
 #define NAND_DISABLE_CE(nand) \
 	do { \
-		(((volatile immap_t *)CFG_IMMR)->im_ioport.iop_pddat) |=  0x0040; \
+		(((volatile immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pddat) |=  0x0040; \
 	} while(0)
 
 #define NAND_ENABLE_CE(nand) \
 	do { \
-		(((volatile immap_t *)CFG_IMMR)->im_ioport.iop_pddat) &= ~0x0040; \
+		(((volatile immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pddat) &= ~0x0040; \
 	} while(0)
 
 #define NAND_CTL_CLRALE(nandptr) \
 	do { \
-		(((volatile immap_t *)CFG_IMMR)->im_ioport.iop_pddat) &= ~0x0100; \
+		(((volatile immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pddat) &= ~0x0100; \
 	} while(0)
 
 #define NAND_CTL_SETALE(nandptr) \
 	do { \
-		(((volatile immap_t *)CFG_IMMR)->im_ioport.iop_pddat) |=  0x0100; \
+		(((volatile immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pddat) |=  0x0100; \
 	} while(0)
 
 #define NAND_CTL_CLRCLE(nandptr) \
 	do { \
-		(((volatile immap_t *)CFG_IMMR)->im_ioport.iop_pddat) &= ~0x0080; \
+		(((volatile immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pddat) &= ~0x0080; \
 	} while(0)
 
 #define NAND_CTL_SETCLE(nandptr) \
 	do { \
-		(((volatile immap_t *)CFG_IMMR)->im_ioport.iop_pddat) |=  0x0080; \
+		(((volatile immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pddat) |=  0x0080; \
 	} while(0)
 
 #define NAND_WAIT_READY(nand) \
 	do { \
-		while ((((volatile immap_t *)CFG_IMMR)->im_ioport.iop_pcdat & 0x100) == 0) \
+		while ((((volatile immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pcdat & 0x100) == 0) \
 			; \
 	} while (0)
 
@@ -521,16 +519,16 @@ static inline void __led_set(led_id_t mask, int state)
 }
 
 /* MAX3100 console */
-#define MAX3100_SPI_RXD_PORT	(((volatile immap_t *)CFG_IMMR)->im_cpm.cp_pbdat)
+#define MAX3100_SPI_RXD_PORT	(((volatile immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pbdat)
 #define MAX3100_SPI_RXD_BIT	0x00000008
 
-#define MAX3100_SPI_TXD_PORT	(((volatile immap_t *)CFG_IMMR)->im_cpm.cp_pbdat)
+#define MAX3100_SPI_TXD_PORT	(((volatile immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pbdat)
 #define MAX3100_SPI_TXD_BIT	0x00000004
 
-#define MAX3100_SPI_CLK_PORT	(((volatile immap_t *)CFG_IMMR)->im_cpm.cp_pbdat)
+#define MAX3100_SPI_CLK_PORT	(((volatile immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pbdat)
 #define MAX3100_SPI_CLK_BIT	0x00000002
 
-#define MAX3100_CS_PORT		(((volatile immap_t *)CFG_IMMR)->im_ioport.iop_pddat)
+#define MAX3100_CS_PORT		(((volatile immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pddat)
 #define MAX3100_CS_BIT		0x0010
 
 #endif
diff --git a/include/configs/NSCU.h b/include/configs/NSCU.h
index 31762b9a3..6abd3f1d9 100644
--- a/include/configs/NSCU.h
+++ b/include/configs/NSCU.h
@@ -83,7 +83,7 @@
 #define CONFIG_MISC_INIT_R	  1
 
 #define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
-#undef	CFG_LOADS_BAUD_CHANGE		/* don't allow baudrate change	*/
+#undef	CONFIG_SYS_LOADS_BAUD_CHANGE		/* don't allow baudrate change	*/
 
 #undef	CONFIG_WATCHDOG			/* watchdog disabled		*/
 
@@ -129,33 +129,33 @@
 /*
  * Miscellaneous configurable options
  */
-#define	CFG_LONGHELP			/* undef to save memory		*/
-#define	CFG_PROMPT		"=> "	/* Monitor Command Prompt	*/
+#define	CONFIG_SYS_LONGHELP			/* undef to save memory		*/
+#define	CONFIG_SYS_PROMPT		"=> "	/* Monitor Command Prompt	*/
 
 #define CONFIG_CMDLINE_EDITING	1	/* add command line history
 */
-#define	CFG_HUSH_PARSER		1	/* use "hush" command parser	*/
-#ifdef	CFG_HUSH_PARSER
-#define	CFG_PROMPT_HUSH_PS2	"> "
+#define	CONFIG_SYS_HUSH_PARSER		1	/* use "hush" command parser	*/
+#ifdef	CONFIG_SYS_HUSH_PARSER
+#define	CONFIG_SYS_PROMPT_HUSH_PS2	"> "
 #endif
 
 #if defined(CONFIG_CMD_KGDB)
-#define	CFG_CBSIZE		1024	/* Console I/O Buffer Size	*/
+#define	CONFIG_SYS_CBSIZE		1024	/* Console I/O Buffer Size	*/
 #else
-#define	CFG_CBSIZE		256	/* Console I/O Buffer Size	*/
+#define	CONFIG_SYS_CBSIZE		256	/* Console I/O Buffer Size	*/
 #endif
-#define	CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define	CFG_MAXARGS		16	/* max number of command args	*/
-#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+#define	CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define	CONFIG_SYS_MAXARGS		16	/* max number of command args	*/
+#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
 
-#define CFG_MEMTEST_START	0x0400000	/* memtest works on	*/
-#define CFG_MEMTEST_END		0x0C00000	/* 4 ... 12 MB in DRAM	*/
+#define CONFIG_SYS_MEMTEST_START	0x0400000	/* memtest works on	*/
+#define CONFIG_SYS_MEMTEST_END		0x0C00000	/* 4 ... 12 MB in DRAM	*/
 
-#define	CFG_LOAD_ADDR		0x100000	/* default load address	*/
+#define	CONFIG_SYS_LOAD_ADDR		0x100000	/* default load address	*/
 
-#define	CFG_HZ			1000	/* decrementer freq: 1 ms ticks	*/
+#define	CONFIG_SYS_HZ			1000	/* decrementer freq: 1 ms ticks	*/
 
-#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
 
 /*
  * Low Level Configuration Settings
@@ -165,71 +165,71 @@
 /*-----------------------------------------------------------------------
  * Internal Memory Mapped Register
  */
-#define CFG_IMMR		0xFFF00000
+#define CONFIG_SYS_IMMR		0xFFF00000
 
 /*-----------------------------------------------------------------------
  * Definitions for initial stack pointer and data area (in DPRAM)
  */
-#define CFG_INIT_RAM_ADDR	CFG_IMMR
-#define	CFG_INIT_RAM_END	0x2F00	/* End of used area in DPRAM	*/
-#define	CFG_GBL_DATA_SIZE	64  /* size in bytes reserved for initial data */
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define	CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_IMMR
+#define	CONFIG_SYS_INIT_RAM_END	0x2F00	/* End of used area in DPRAM	*/
+#define	CONFIG_SYS_GBL_DATA_SIZE	64  /* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define	CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
 /*-----------------------------------------------------------------------
  * Start addresses for the final memory configuration
  * (Set up by the startup code)
- * Please note that CFG_SDRAM_BASE _must_ start at 0
+ * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
  */
-#define	CFG_SDRAM_BASE		0x00000000
-#define CFG_FLASH_BASE		0x40000000
-#define	CFG_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor	*/
-#define CFG_MONITOR_BASE	CFG_FLASH_BASE
-#define	CFG_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/
+#define	CONFIG_SYS_SDRAM_BASE		0x00000000
+#define CONFIG_SYS_FLASH_BASE		0x40000000
+#define	CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor	*/
+#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_FLASH_BASE
+#define	CONFIG_SYS_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/
 
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define	CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux	*/
+#define	CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux	*/
 
 /*-----------------------------------------------------------------------
  * FLASH organization
  */
 
 /* use CFI flash driver */
-#define CFG_FLASH_CFI		1	/* Flash is CFI conformant */
+#define CONFIG_SYS_FLASH_CFI		1	/* Flash is CFI conformant */
 #define CONFIG_FLASH_CFI_DRIVER	1	/* Use the common driver */
-#define CFG_FLASH_BANKS_LIST	{ CFG_FLASH_BASE, CFG_FLASH_BASE+flash_info[0].size }
-#define CFG_FLASH_EMPTY_INFO
-#define CFG_FLASH_USE_BUFFER_WRITE	1
-#define CFG_MAX_FLASH_BANKS	2	/* max number of memory banks */
-#define CFG_MAX_FLASH_SECT	71	/* max number of sectors on one chip */
+#define CONFIG_SYS_FLASH_BANKS_LIST	{ CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE+flash_info[0].size }
+#define CONFIG_SYS_FLASH_EMPTY_INFO
+#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE	1
+#define CONFIG_SYS_MAX_FLASH_BANKS	2	/* max number of memory banks */
+#define CONFIG_SYS_MAX_FLASH_SECT	71	/* max number of sectors on one chip */
 
-#define	CFG_ENV_IS_IN_FLASH	1
-#define	CFG_ENV_OFFSET		0x8000	/*   Offset   of Environment Sector	*/
-#define	CFG_ENV_SIZE		0x4000	/* Total Size of Environment Sector	*/
+#define	CONFIG_ENV_IS_IN_FLASH	1
+#define	CONFIG_ENV_OFFSET		0x8000	/*   Offset   of Environment Sector	*/
+#define	CONFIG_ENV_SIZE		0x4000	/* Total Size of Environment Sector	*/
 
 /* Address and size of Redundant Environment Sector	*/
-#define CFG_ENV_OFFSET_REDUND	(CFG_ENV_OFFSET+CFG_ENV_SIZE)
-#define CFG_ENV_SIZE_REDUND	(CFG_ENV_SIZE)
+#define CONFIG_ENV_OFFSET_REDUND	(CONFIG_ENV_OFFSET+CONFIG_ENV_SIZE)
+#define CONFIG_ENV_SIZE_REDUND	(CONFIG_ENV_SIZE)
 
-#define	CFG_USE_PPCENV			/* Environment embedded in sect .ppcenv */
+#define	CONFIG_SYS_USE_PPCENV			/* Environment embedded in sect .ppcenv */
 
 /*-----------------------------------------------------------------------
  * Hardware Information Block
  */
-#define CFG_HWINFO_OFFSET	0x0003FFC0	/* offset of HW Info block */
-#define CFG_HWINFO_SIZE		0x00000040	/* size   of HW Info block */
-#define CFG_HWINFO_MAGIC	0x54514D38	/* 'TQM8' */
+#define CONFIG_SYS_HWINFO_OFFSET	0x0003FFC0	/* offset of HW Info block */
+#define CONFIG_SYS_HWINFO_SIZE		0x00000040	/* size   of HW Info block */
+#define CONFIG_SYS_HWINFO_MAGIC	0x54514D38	/* 'TQM8' */
 
 /*-----------------------------------------------------------------------
  * Cache Configuration
  */
-#define CFG_CACHELINE_SIZE	16	/* For all MPC8xx CPUs			*/
+#define CONFIG_SYS_CACHELINE_SIZE	16	/* For all MPC8xx CPUs			*/
 #if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT	4	/* log base 2 of the above value	*/
+#define CONFIG_SYS_CACHELINE_SHIFT	4	/* log base 2 of the above value	*/
 #endif
 
 /*-----------------------------------------------------------------------
@@ -239,10 +239,10 @@
  * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze
  */
 #if defined(CONFIG_WATCHDOG)
-#define CFG_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
+#define CONFIG_SYS_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
 			 SYPCR_SWE  | SYPCR_SWRI| SYPCR_SWP)
 #else
-#define CFG_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
+#define CONFIG_SYS_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
 #endif
 
 /*-----------------------------------------------------------------------
@@ -251,9 +251,9 @@
  * PCMCIA config., multi-function pin tri-state
  */
 #ifndef	CONFIG_CAN_DRIVER
-#define CFG_SIUMCR	(SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_MLRC01)
+#define CONFIG_SYS_SIUMCR	(SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_MLRC01)
 #else	/* we must activate GPL5 in the SIUMCR for CAN */
-#define CFG_SIUMCR	(SIUMCR_DBGC11 | SIUMCR_DBPC00 | SIUMCR_MLRC01)
+#define CONFIG_SYS_SIUMCR	(SIUMCR_DBGC11 | SIUMCR_DBPC00 | SIUMCR_MLRC01)
 #endif	/* CONFIG_CAN_DRIVER */
 
 /*-----------------------------------------------------------------------
@@ -261,20 +261,20 @@
  *-----------------------------------------------------------------------
  * Clear Reference Interrupt Status, Timebase freezing enabled
  */
-#define CFG_TBSCR	(TBSCR_REFA | TBSCR_REFB | TBSCR_TBF)
+#define CONFIG_SYS_TBSCR	(TBSCR_REFA | TBSCR_REFB | TBSCR_TBF)
 
 /*-----------------------------------------------------------------------
  * RTCSC - Real-Time Clock Status and Control Register		11-27
  *-----------------------------------------------------------------------
  */
-#define CFG_RTCSC	(RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE)
+#define CONFIG_SYS_RTCSC	(RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE)
 
 /*-----------------------------------------------------------------------
  * PISCR - Periodic Interrupt Status and Control		11-31
  *-----------------------------------------------------------------------
  * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
  */
-#define CFG_PISCR	(PISCR_PS | PISCR_PITF)
+#define CONFIG_SYS_PISCR	(PISCR_PS | PISCR_PITF)
 
 /*-----------------------------------------------------------------------
  * PLPRCR - PLL, Low-Power, and Reset Control Register		15-30
@@ -282,7 +282,7 @@
  * Reset PLL lock status sticky bit, timer expired status bit and timer
  * interrupt status bit
  */
-#define CFG_PLPRCR	(PLPRCR_SPLSS | PLPRCR_TEXPS | PLPRCR_TMIST)
+#define CONFIG_SYS_PLPRCR	(PLPRCR_SPLSS | PLPRCR_TEXPS | PLPRCR_TMIST)
 
 /*-----------------------------------------------------------------------
  * SCCR - System Clock and reset Control Register		15-27
@@ -291,7 +291,7 @@
  * power management and some other internal clocks
  */
 #define SCCR_MASK	SCCR_EBDF11
-#define CFG_SCCR	(SCCR_COM00   | SCCR_DFSYNC00 | SCCR_DFBRG00  | \
+#define CONFIG_SYS_SCCR	(SCCR_COM00   | SCCR_DFSYNC00 | SCCR_DFBRG00  | \
 			 SCCR_DFNL000 | SCCR_DFNH000  | SCCR_DFLCD000 | \
 			 SCCR_DFALCD00)
 
@@ -303,14 +303,14 @@
 /* NSCU use both slots, SLOT_A as "primary". */
 #define	CONFIG_PCMCIA_SLOT_A 1
 
-#define CFG_PCMCIA_MEM_ADDR	(0xE0000000)
-#define CFG_PCMCIA_MEM_SIZE	( 64 << 20 )
-#define CFG_PCMCIA_DMA_ADDR	(0xE4000000)
-#define CFG_PCMCIA_DMA_SIZE	( 64 << 20 )
-#define CFG_PCMCIA_ATTRB_ADDR	(0xE8000000)
-#define CFG_PCMCIA_ATTRB_SIZE	( 64 << 20 )
-#define CFG_PCMCIA_IO_ADDR	(0xEC000000)
-#define CFG_PCMCIA_IO_SIZE	( 64 << 20 )
+#define CONFIG_SYS_PCMCIA_MEM_ADDR	(0xE0000000)
+#define CONFIG_SYS_PCMCIA_MEM_SIZE	( 64 << 20 )
+#define CONFIG_SYS_PCMCIA_DMA_ADDR	(0xE4000000)
+#define CONFIG_SYS_PCMCIA_DMA_SIZE	( 64 << 20 )
+#define CONFIG_SYS_PCMCIA_ATTRB_ADDR	(0xE8000000)
+#define CONFIG_SYS_PCMCIA_ATTRB_SIZE	( 64 << 20 )
+#define CONFIG_SYS_PCMCIA_IO_ADDR	(0xEC000000)
+#define CONFIG_SYS_PCMCIA_IO_SIZE	( 64 << 20 )
 #define PCMCIA_MEM_WIN_NO	8 /* override default 4 in pcmcia.h */
 #define	PCMCIA_SOCKETS_NO	2 /* we have two sockets */
 #undef	NSCU_OE_INV		/* PCMCIA_GCRX_CXOE was inverted on early boards */
@@ -326,29 +326,29 @@
 #undef	CONFIG_IDE_LED			/* LED   for ide not supported	*/
 #undef	CONFIG_IDE_RESET		/* reset for ide not supported	*/
 
-#define CFG_IDE_MAXBUS		2	/* max. 2 IDE buses		*/
-#define CFG_IDE_MAXDEVICE	4	/* max. 2 drives per IDE bus	*/
+#define CONFIG_SYS_IDE_MAXBUS		2	/* max. 2 IDE buses		*/
+#define CONFIG_SYS_IDE_MAXDEVICE	4	/* max. 2 drives per IDE bus	*/
 
-#define CFG_ATA_IDE0_OFFSET	0x0000
-#define CFG_ATA_IDE1_OFFSET	(4 * CFG_PCMCIA_MEM_SIZE) /* starts @ 4th window */
+#define CONFIG_SYS_ATA_IDE0_OFFSET	0x0000
+#define CONFIG_SYS_ATA_IDE1_OFFSET	(4 * CONFIG_SYS_PCMCIA_MEM_SIZE) /* starts @ 4th window */
 
-#define CFG_ATA_BASE_ADDR	CFG_PCMCIA_MEM_ADDR
+#define CONFIG_SYS_ATA_BASE_ADDR	CONFIG_SYS_PCMCIA_MEM_ADDR
 
 /* Offset for data I/O			*/
-#define CFG_ATA_DATA_OFFSET	(CFG_PCMCIA_MEM_SIZE + 0x320)
+#define CONFIG_SYS_ATA_DATA_OFFSET	(CONFIG_SYS_PCMCIA_MEM_SIZE + 0x320)
 
 /* Offset for normal register accesses	*/
-#define CFG_ATA_REG_OFFSET	(2 * CFG_PCMCIA_MEM_SIZE + 0x320)
+#define CONFIG_SYS_ATA_REG_OFFSET	(2 * CONFIG_SYS_PCMCIA_MEM_SIZE + 0x320)
 
 /* Offset for alternate registers	*/
-#define CFG_ATA_ALT_OFFSET	0x0100
+#define CONFIG_SYS_ATA_ALT_OFFSET	0x0100
 
 /*-----------------------------------------------------------------------
  *
  *-----------------------------------------------------------------------
  *
  */
-#define CFG_DER	0
+#define CONFIG_SYS_DER	0
 
 /*
  * Init Memory Controller:
@@ -363,22 +363,22 @@
  * restrict access enough to keep SRAM working (if any)
  * but not too much to meddle with FLASH accesses
  */
-#define CFG_REMAP_OR_AM		0x80000000	/* OR addr mask */
-#define CFG_PRELIM_OR_AM	0xE0000000	/* OR addr mask */
+#define CONFIG_SYS_REMAP_OR_AM		0x80000000	/* OR addr mask */
+#define CONFIG_SYS_PRELIM_OR_AM	0xE0000000	/* OR addr mask */
 
 /*
  * FLASH timing:
  */
-#define CFG_OR_TIMING_FLASH	(OR_ACS_DIV1  | OR_TRLX | OR_CSNT_SAM | \
+#define CONFIG_SYS_OR_TIMING_FLASH	(OR_ACS_DIV1  | OR_TRLX | OR_CSNT_SAM | \
 				 OR_SCY_3_CLK | OR_EHTR | OR_BI)
 
-#define CFG_OR0_REMAP	(CFG_REMAP_OR_AM  | CFG_OR_TIMING_FLASH)
-#define CFG_OR0_PRELIM	(CFG_PRELIM_OR_AM | CFG_OR_TIMING_FLASH)
-#define CFG_BR0_PRELIM	((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_V )
+#define CONFIG_SYS_OR0_REMAP	(CONFIG_SYS_REMAP_OR_AM  | CONFIG_SYS_OR_TIMING_FLASH)
+#define CONFIG_SYS_OR0_PRELIM	(CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_FLASH)
+#define CONFIG_SYS_BR0_PRELIM	((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_V )
 
-#define CFG_OR1_REMAP	CFG_OR0_REMAP
-#define CFG_OR1_PRELIM	CFG_OR0_PRELIM
-#define CFG_BR1_PRELIM	((FLASH_BASE1_PRELIM & BR_BA_MSK) | BR_V )
+#define CONFIG_SYS_OR1_REMAP	CONFIG_SYS_OR0_REMAP
+#define CONFIG_SYS_OR1_PRELIM	CONFIG_SYS_OR0_PRELIM
+#define CONFIG_SYS_BR1_PRELIM	((FLASH_BASE1_PRELIM & BR_BA_MSK) | BR_V )
 
 /*
  * BR2/3 and OR2/3 (SDRAM)
@@ -389,28 +389,28 @@
 #define	SDRAM_MAX_SIZE		0x04000000	/* max 64 MB per bank	*/
 
 /* SDRAM timing: Multiplexed addresses, GPL5 output to GPL5_A (don't care)	*/
-#define CFG_OR_TIMING_SDRAM	0x00000A00
+#define CONFIG_SYS_OR_TIMING_SDRAM	0x00000A00
 
-#define CFG_OR2_PRELIM	(CFG_PRELIM_OR_AM | CFG_OR_TIMING_SDRAM )
-#define CFG_BR2_PRELIM	((SDRAM_BASE2_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
+#define CONFIG_SYS_OR2_PRELIM	(CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_SDRAM )
+#define CONFIG_SYS_BR2_PRELIM	((SDRAM_BASE2_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
 
 #ifndef	CONFIG_CAN_DRIVER
-#define	CFG_OR3_PRELIM	CFG_OR2_PRELIM
-#define CFG_BR3_PRELIM	((SDRAM_BASE3_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
+#define	CONFIG_SYS_OR3_PRELIM	CONFIG_SYS_OR2_PRELIM
+#define CONFIG_SYS_BR3_PRELIM	((SDRAM_BASE3_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
 #else	/* CAN uses CS3#, so we can have only one SDRAM bank anyway */
-#define	CFG_CAN_BASE		0xC0000000	/* CAN mapped at 0xC0000000	*/
-#define CFG_CAN_OR_AM		0xFFFF8000	/* 32 kB address mask		*/
-#define CFG_OR3_CAN		(CFG_CAN_OR_AM | OR_G5LA | OR_BI)
-#define CFG_BR3_CAN		((CFG_CAN_BASE & BR_BA_MSK) | \
+#define	CONFIG_SYS_CAN_BASE		0xC0000000	/* CAN mapped at 0xC0000000	*/
+#define CONFIG_SYS_CAN_OR_AM		0xFFFF8000	/* 32 kB address mask		*/
+#define CONFIG_SYS_OR3_CAN		(CONFIG_SYS_CAN_OR_AM | OR_G5LA | OR_BI)
+#define CONFIG_SYS_BR3_CAN		((CONFIG_SYS_CAN_BASE & BR_BA_MSK) | \
 					BR_PS_8 | BR_MS_UPMB | BR_V )
 #endif	/* CONFIG_CAN_DRIVER */
 
 #ifdef	CONFIG_ISP1362_USB
-#define	CFG_ISP1362_BASE	0xD0000000	/* ISP1362 mapped at 0xD0000000 */
-#define CFG_ISP1362_OR_AM	0xFFFF8000	/* 32 kB address mask		*/
-#define CFG_OR5_ISP1362		(CFG_ISP1362_OR_AM | OR_CSNT_SAM | \
+#define	CONFIG_SYS_ISP1362_BASE	0xD0000000	/* ISP1362 mapped at 0xD0000000 */
+#define CONFIG_SYS_ISP1362_OR_AM	0xFFFF8000	/* 32 kB address mask		*/
+#define CONFIG_SYS_OR5_ISP1362		(CONFIG_SYS_ISP1362_OR_AM | OR_CSNT_SAM | \
 				 OR_ACS_DIV2       | OR_BI       | OR_SCY_5_CLK)
-#define CFG_BR5_ISP1362		((CFG_ISP1362_BASE & BR_BA_MSK) | \
+#define CONFIG_SYS_BR5_ISP1362		((CONFIG_SYS_ISP1362_BASE & BR_BA_MSK) | \
 				 BR_PS_16          | BR_MS_GPCM | BR_V )
 #endif	/* CONFIG_ISP1362_USB */
 
@@ -441,34 +441,34 @@
  * 80 Mhz => 80.000.000 / Divider = 156
  */
 
-#define CFG_PTA_PER_CLK	((4096 * 32 * 1000) / (4 * 64))
-#define CFG_MAMR_PTA	98
+#define CONFIG_SYS_PTA_PER_CLK	((4096 * 32 * 1000) / (4 * 64))
+#define CONFIG_SYS_MAMR_PTA	98
 
 /*
  * For 16 MBit, refresh rates could be 31.3 us
  * (= 64 ms / 2K = 125 / quad bursts).
  * For a simpler initialization, 15.6 us is used instead.
  *
- * #define CFG_MPTPR_2BK_2K	MPTPR_PTP_DIV32		for 2 banks
- * #define CFG_MPTPR_1BK_2K	MPTPR_PTP_DIV64		for 1 bank
+ * #define CONFIG_SYS_MPTPR_2BK_2K	MPTPR_PTP_DIV32		for 2 banks
+ * #define CONFIG_SYS_MPTPR_1BK_2K	MPTPR_PTP_DIV64		for 1 bank
  */
-#define CFG_MPTPR_2BK_4K	MPTPR_PTP_DIV16		/* setting for 2 banks	*/
-#define CFG_MPTPR_1BK_4K	MPTPR_PTP_DIV32		/* setting for 1 bank	*/
+#define CONFIG_SYS_MPTPR_2BK_4K	MPTPR_PTP_DIV16		/* setting for 2 banks	*/
+#define CONFIG_SYS_MPTPR_1BK_4K	MPTPR_PTP_DIV32		/* setting for 1 bank	*/
 
 /* refresh rate 7.8 us (= 64 ms / 8K = 31.2 / quad bursts) for 256 MBit		*/
-#define CFG_MPTPR_2BK_8K	MPTPR_PTP_DIV8		/* setting for 2 banks	*/
-#define CFG_MPTPR_1BK_8K	MPTPR_PTP_DIV16		/* setting for 1 bank	*/
+#define CONFIG_SYS_MPTPR_2BK_8K	MPTPR_PTP_DIV8		/* setting for 2 banks	*/
+#define CONFIG_SYS_MPTPR_1BK_8K	MPTPR_PTP_DIV16		/* setting for 1 bank	*/
 
 /*
  * MAMR settings for SDRAM
  */
 
 /* 8 column SDRAM */
-#define CFG_MAMR_8COL	((CFG_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
+#define CONFIG_SYS_MAMR_8COL	((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
 			 MAMR_AMA_TYPE_0 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A11 |	\
 			 MAMR_RLFA_1X	 | MAMR_WLFA_1X	   | MAMR_TLFA_4X)
 /* 9 column SDRAM */
-#define CFG_MAMR_9COL	((CFG_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
+#define CONFIG_SYS_MAMR_9COL	((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
 			 MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 |	\
 			 MAMR_RLFA_1X	 | MAMR_WLFA_1X	   | MAMR_TLFA_4X)
 
diff --git a/include/configs/NX823.h b/include/configs/NX823.h
index 2a4bd4724..9182223c6 100644
--- a/include/configs/NX823.h
+++ b/include/configs/NX823.h
@@ -53,7 +53,7 @@
 #define CONFIG_BOOTCOMMAND	"bootm 400e0000"
 
 #define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
-#undef	CFG_LOADS_BAUD_CHANGE		/* don't allow baudrate change	*/
+#undef	CONFIG_SYS_LOADS_BAUD_CHANGE		/* don't allow baudrate change	*/
 #undef	CONFIG_WATCHDOG			/* watchdog disabled, for now	    */
 #define CONFIG_AUTOSCRIPT
 
@@ -81,25 +81,25 @@
 /*
  * Miscellaneous configurable options
  */
-#define CFG_LONGHELP			/* undef to save memory	    */
-#define CFG_PROMPT		"=> "	/* Monitor Command Prompt   */
+#define CONFIG_SYS_LONGHELP			/* undef to save memory	    */
+#define CONFIG_SYS_PROMPT		"=> "	/* Monitor Command Prompt   */
 #if defined(CONFIG_CMD_KGDB)
-#define CFG_CBSIZE		1024	/* Console I/O Buffer Size  */
+#define CONFIG_SYS_CBSIZE		1024	/* Console I/O Buffer Size  */
 #else
-#define CFG_CBSIZE		256	/* Console I/O Buffer Size  */
+#define CONFIG_SYS_CBSIZE		256	/* Console I/O Buffer Size  */
 #endif
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16)	/* Print Buffer Size */
-#define CFG_MAXARGS		16	/* max number of command args	*/
-#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)	/* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS		16	/* max number of command args	*/
+#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
 
-#define CFG_MEMTEST_START	0x0400000	/* memtest works on */
-#define CFG_MEMTEST_END		0x0C00000	/* 4 ... 12 MB in DRAM	*/
+#define CONFIG_SYS_MEMTEST_START	0x0400000	/* memtest works on */
+#define CONFIG_SYS_MEMTEST_END		0x0C00000	/* 4 ... 12 MB in DRAM	*/
 
-#define CFG_LOAD_ADDR		0x100000	/* default load address */
+#define CONFIG_SYS_LOAD_ADDR		0x100000	/* default load address */
 
-#define CFG_HZ			1000	/* decrementer freq: 1 ms ticks */
+#define CONFIG_SYS_HZ			1000	/* decrementer freq: 1 ms ticks */
 
-#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
 
 /*
  * Low Level Configuration Settings
@@ -109,64 +109,64 @@
 /*-----------------------------------------------------------------------
  * Internal Memory Mapped Register
  */
-#define CFG_IMMR		0xFFF00000
+#define CONFIG_SYS_IMMR		0xFFF00000
 
 /*-----------------------------------------------------------------------
  * Definitions for initial stack pointer and data area (in DPRAM)
  */
-#define CFG_INIT_RAM_ADDR	CFG_IMMR
-#define CFG_INIT_RAM_END	0x2F00	/* End of used area in DPRAM	*/
-#define CFG_GBL_DATA_SIZE	64	/* size in bytes reserved for initial data */
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_IMMR
+#define CONFIG_SYS_INIT_RAM_END	0x2F00	/* End of used area in DPRAM	*/
+#define CONFIG_SYS_GBL_DATA_SIZE	64	/* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
 /*-----------------------------------------------------------------------
  * Start addresses for the final memory configuration
  * (Set up by the startup code)
- * Please note that CFG_SDRAM_BASE _must_ start at 0
+ * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
  */
-#define CFG_SDRAM_BASE		0x00000000
-#define CFG_FLASH_BASE		0x40000000
-#define CFG_MONITOR_LEN		(128 << 10)	/* Reserve 128 kB for Monitor	*/
-#define CFG_MONITOR_BASE	CFG_FLASH_BASE
-#define CFG_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/
+#define CONFIG_SYS_SDRAM_BASE		0x00000000
+#define CONFIG_SYS_FLASH_BASE		0x40000000
+#define CONFIG_SYS_MONITOR_LEN		(128 << 10)	/* Reserve 128 kB for Monitor	*/
+#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_FLASH_BASE
+#define CONFIG_SYS_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/
 
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
+#define CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
 
 /*-----------------------------------------------------------------------
  * FLASH organization
  */
-#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks	    */
-#define CFG_MAX_FLASH_SECT	128	/* max number of sectors on one chip	*/
+#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks	    */
+#define CONFIG_SYS_MAX_FLASH_SECT	128	/* max number of sectors on one chip	*/
 
-#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)  */
-#define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)  */
+#define CONFIG_SYS_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)  */
+#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)  */
 
-#define CFG_ENV_IS_IN_FLASH	1
+#define CONFIG_ENV_IS_IN_FLASH	1
 #define xEMBED
 #ifdef	EMBED
-#define CFG_ENV_SIZE		0x200	/* FIXME How big when embedded?? */
-#define CFG_ENV_ADDR		CFG_MONITOR_BASE
+#define CONFIG_ENV_SIZE		0x200	/* FIXME How big when embedded?? */
+#define CONFIG_ENV_ADDR		CONFIG_SYS_MONITOR_BASE
 #else
-#define CFG_ENV_ADDR		0x40020000	/* absolute address for now   */
-#define CFG_ENV_SIZE		0x20000 /* 8K ouch, this may later be */
+#define CONFIG_ENV_ADDR		0x40020000	/* absolute address for now   */
+#define CONFIG_ENV_SIZE		0x20000 /* 8K ouch, this may later be */
 #endif
 
-#define CFG_FLASH_SN_BASE	0x4001fff0	/* programmer automagically puts    */
-#define CFG_FLASH_SN_SECTOR	0x40000000	/* a serial number here		    */
-#define CFG_FLASH_SN_BYTES	8
+#define CONFIG_SYS_FLASH_SN_BASE	0x4001fff0	/* programmer automagically puts    */
+#define CONFIG_SYS_FLASH_SN_SECTOR	0x40000000	/* a serial number here		    */
+#define CONFIG_SYS_FLASH_SN_BYTES	8
 
 /*-----------------------------------------------------------------------
  * Cache Configuration
  */
-#define CFG_CACHELINE_SIZE	16	/* For all MPC8xx CPUs		*/
+#define CONFIG_SYS_CACHELINE_SIZE	16	/* For all MPC8xx CPUs		*/
 #if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT	4	/* log base 2 of the above value    */
+#define CONFIG_SYS_CACHELINE_SHIFT	4	/* log base 2 of the above value    */
 #endif
 
 /*-----------------------------------------------------------------------
@@ -176,10 +176,10 @@
  * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze
  */
 #if defined(CONFIG_WATCHDOG)
-#define CFG_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
+#define CONFIG_SYS_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
 			 SYPCR_SWE  | SYPCR_SWP)
 #else
-#define CFG_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
+#define CONFIG_SYS_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
 #endif
 
 /*-----------------------------------------------------------------------
@@ -187,27 +187,27 @@
  *-----------------------------------------------------------------------
  * PCMCIA config., multi-function pin tri-state
  */
-#define CFG_SIUMCR	(SIUMCR_DBGC00 | SIUMCR_DBPC00)
+#define CONFIG_SYS_SIUMCR	(SIUMCR_DBGC00 | SIUMCR_DBPC00)
 
 /*-----------------------------------------------------------------------
  * TBSCR - Time Base Status and Control				12-16
  *-----------------------------------------------------------------------
  * Clear Reference Interrupt Status, Timebase freezing enabled
  */
-#define CFG_TBSCR	(TBSCR_REFA | TBSCR_REFB | TBSCR_TBF)
+#define CONFIG_SYS_TBSCR	(TBSCR_REFA | TBSCR_REFB | TBSCR_TBF)
 
 /*-----------------------------------------------------------------------
  * RTCSC - Real-Time Clock Status and Control Register		12-18
  *-----------------------------------------------------------------------
  */
-#define CFG_RTCSC	(RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE)
+#define CONFIG_SYS_RTCSC	(RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE)
 
 /*-----------------------------------------------------------------------
  * PISCR - Periodic Interrupt Status and Control		12-23
  *-----------------------------------------------------------------------
  * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
  */
-#define CFG_PISCR	(PISCR_PS | PISCR_PITF)
+#define CONFIG_SYS_PISCR	(PISCR_PS | PISCR_PITF)
 
 /*-----------------------------------------------------------------------
  * PLPRCR - PLL, Low-Power, and Reset Control Register		5-7
@@ -218,8 +218,8 @@
 #define MPC8XX_SPEED	66666666L
 #define MPC8XX_XIN	32768	/* 32.768 kHz crystal */
 #define MPC8XX_FACT		(MPC8XX_SPEED/MPC8XX_XIN)
-#define CFG_PLPRCR_MF  ((MPC8XX_FACT-1) << PLPRCR_MF_SHIFT)
-#define CFG_PLPRCR		(CFG_PLPRCR_MF | PLPRCR_TEXPS | PLPRCR_TMIST)
+#define CONFIG_SYS_PLPRCR_MF  ((MPC8XX_FACT-1) << PLPRCR_MF_SHIFT)
+#define CONFIG_SYS_PLPRCR		(CONFIG_SYS_PLPRCR_MF | PLPRCR_TEXPS | PLPRCR_TMIST)
 
 /*-----------------------------------------------------------------------
  * SCCR - System Clock and reset Control Register		5-3
@@ -228,7 +228,7 @@
  * power management and some other internal clocks
  */
 #define SCCR_MASK	SCCR_EBDF11
-#define CFG_SCCR	(SCCR_TBS     | \
+#define CONFIG_SYS_SCCR	(SCCR_TBS     | \
 			 SCCR_COM00   | SCCR_DFSYNC00 | SCCR_DFBRG00  | \
 			 SCCR_DFNL000 | SCCR_DFNH000  | SCCR_DFLCD000 | \
 			 SCCR_DFALCD00)
@@ -238,7 +238,7 @@
  *-----------------------------------------------------------------------
  *
  */
-#define CFG_DER		0
+#define CONFIG_SYS_DER		0
 
 /*
  * Init Memory Controller:
@@ -252,16 +252,16 @@
  * restrict access enough to keep SRAM working (if any)
  * but not too much to meddle with FLASH accesses
  */
-#define CFG_REMAP_OR_AM		0x80000000	/* OR addr mask */
-#define CFG_PRELIM_OR_AM	0xE0000000	/* OR addr mask */
+#define CONFIG_SYS_REMAP_OR_AM		0x80000000	/* OR addr mask */
+#define CONFIG_SYS_PRELIM_OR_AM	0xE0000000	/* OR addr mask */
 
 /* FLASH timing: ACS = 00, TRLX = 0, CSNT = 1, SCY = 8, EHTR = 0	*/
-#define CFG_OR_TIMING_FLASH	(OR_CSNT_SAM  | OR_ACS_DIV1 | OR_BI | \
+#define CONFIG_SYS_OR_TIMING_FLASH	(OR_CSNT_SAM  | OR_ACS_DIV1 | OR_BI | \
 				 OR_SCY_8_CLK )
 
-#define CFG_OR0_REMAP	(CFG_REMAP_OR_AM  | CFG_OR_TIMING_FLASH)
-#define CFG_OR0_PRELIM	(CFG_PRELIM_OR_AM | CFG_OR_TIMING_FLASH)
-#define CFG_BR0_PRELIM	((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_PS_16 | BR_V )
+#define CONFIG_SYS_OR0_REMAP	(CONFIG_SYS_REMAP_OR_AM  | CONFIG_SYS_OR_TIMING_FLASH)
+#define CONFIG_SYS_OR0_PRELIM	(CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_FLASH)
+#define CONFIG_SYS_BR0_PRELIM	((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_PS_16 | BR_V )
 
 /*
  * BR1/2 and OR1/2 (SDRAM)
@@ -271,12 +271,12 @@
 #define SDRAM_MAX_SIZE		0x04000000	/* max 64 MB per bank	*/
 
 /* SDRAM timing: Multiplexed addresses, drive GPL5 high on first cycle */
-#define CFG_OR_TIMING_SDRAM	(OR_G5LS | OR_CSNT_SAM)
+#define CONFIG_SYS_OR_TIMING_SDRAM	(OR_G5LS | OR_CSNT_SAM)
 
-#define CFG_OR1_PRELIM	(CFG_PRELIM_OR_AM | CFG_OR_TIMING_SDRAM )
-#define CFG_BR1_PRELIM	((SDRAM_BASE1_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
-#define CFG_OR2_PRELIM	CFG_OR1_PRELIM
-#define CFG_BR2_PRELIM	((SDRAM_BASE2_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
+#define CONFIG_SYS_OR1_PRELIM	(CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_SDRAM )
+#define CONFIG_SYS_BR1_PRELIM	((SDRAM_BASE1_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
+#define CONFIG_SYS_OR2_PRELIM	CONFIG_SYS_OR1_PRELIM
+#define CONFIG_SYS_BR2_PRELIM	((SDRAM_BASE2_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
 
 /* IO and memory mapped stuff */
 #define NX823_IO_OR_AM		0xFFFF0000	/* mask for IO addresses */
@@ -292,24 +292,24 @@
  */
 #define GPOUT_BASE	(NX823_IO_BASE + GPOUT_OFFSET)
 #define GPOUT_TIMING	(OR_CSNT_SAM | OR_TRLX | OR_BI)
-#define CFG_OR3_PRELIM	(NX823_IO_OR_AM | GPOUT_TIMING)
-#define CFG_BR3_PRELIM	(GPOUT_BASE | BR_V)
+#define CONFIG_SYS_OR3_PRELIM	(NX823_IO_OR_AM | GPOUT_TIMING)
+#define CONFIG_SYS_BR3_PRELIM	(GPOUT_BASE | BR_V)
 
 /*
  * BR4 and OR4 (QUART)
  */
 #define QUART_BASE	(NX823_IO_BASE + QUART_OFFSET)
 #define QUART_TIMING	(OR_ACS_DIV4 | OR_SCY_3_CLK | OR_CSNT_SAM | OR_TRLX)
-#define CFG_OR4_PRELIM	(NX823_IO_OR_AM | QUART_TIMING | OR_BI)
-#define CFG_BR4_PRELIM	(QUART_BASE | BR_PS_8 | BR_V)
+#define CONFIG_SYS_OR4_PRELIM	(NX823_IO_OR_AM | QUART_TIMING | OR_BI)
+#define CONFIG_SYS_BR4_PRELIM	(QUART_BASE | BR_PS_8 | BR_V)
 
 /*
  * BR5 and OR5 (Video DAC)
  */
 #define VIDAC_BASE	(NX823_IO_BASE + VIDAC_OFFSET)
 #define VIDAC_TIMING	(OR_ACS_DIV4 | OR_SCY_3_CLK | OR_CSNT_SAM | OR_EHTR)
-#define CFG_OR5_PRELIM	(NX823_IO_OR_AM | VIDAC_TIMING | OR_BI)
-#define CFG_BR5_PRELIM	(VIDAC_BASE | BR_PS_8 | BR_V)
+#define CONFIG_SYS_OR5_PRELIM	(NX823_IO_OR_AM | VIDAC_TIMING | OR_BI)
+#define CONFIG_SYS_BR5_PRELIM	(VIDAC_BASE | BR_PS_8 | BR_V)
 
 /*
  * BR6 and OR6 (CPLD)
@@ -317,42 +317,42 @@
  */
 #define CPLD_BASE	(NX823_IO_BASE + CPLD_OFFSET)
 #define CPLD_TIMING	(OR_ACS_DIV4 | OR_SCY_3_CLK | OR_CSNT_SAM | OR_EHTR)
-#define CFG_OR6_PRELIM	(NX823_IO_OR_AM | CPLD_TIMING | OR_BI)
-#define CFG_BR6_PRELIM	(CPLD_BASE | BR_PS_8 | BR_V )
+#define CONFIG_SYS_OR6_PRELIM	(NX823_IO_OR_AM | CPLD_TIMING | OR_BI)
+#define CONFIG_SYS_BR6_PRELIM	(CPLD_BASE | BR_PS_8 | BR_V )
 
 /*
  * BR7 and OR7 (SED1386)
  * FIXME timing not verified for SED controller
  */
 #define SED1386_BASE	0xF7000000
-#define CFG_OR7_PRELIM	(0xFF000000 | OR_BI | OR_SETA)
-#define CFG_BR7_PRELIM	(SED1386_BASE | BR_PS_16 | BR_V )
+#define CONFIG_SYS_OR7_PRELIM	(0xFF000000 | OR_BI | OR_SETA)
+#define CONFIG_SYS_BR7_PRELIM	(SED1386_BASE | BR_PS_16 | BR_V )
 
 /*
  * Memory Periodic Timer Prescaler
  */
 
 /* periodic timer for refresh */
-#define CFG_MAMR_PTA	97		/* start with divider for 100 MHz   */
+#define CONFIG_SYS_MAMR_PTA	97		/* start with divider for 100 MHz   */
 
 /* refresh rate 15.6 us (= 64 ms / 4K = 62.4 / quad bursts) for <= 128 MBit	*/
-#define CFG_MPTPR_2BK_4K	MPTPR_PTP_DIV16 /* setting for 2 banks	*/
-#define CFG_MPTPR_1BK_4K	MPTPR_PTP_DIV32 /* setting for 1 bank	*/
+#define CONFIG_SYS_MPTPR_2BK_4K	MPTPR_PTP_DIV16 /* setting for 2 banks	*/
+#define CONFIG_SYS_MPTPR_1BK_4K	MPTPR_PTP_DIV32 /* setting for 1 bank	*/
 
 /* refresh rate 7.8 us (= 64 ms / 8K = 31.2 / quad bursts) for 256 MBit		*/
-#define CFG_MPTPR_2BK_8K	MPTPR_PTP_DIV8	/* setting for 2 banks	*/
-#define CFG_MPTPR_1BK_8K	MPTPR_PTP_DIV16 /* setting for 1 bank	*/
+#define CONFIG_SYS_MPTPR_2BK_8K	MPTPR_PTP_DIV8	/* setting for 2 banks	*/
+#define CONFIG_SYS_MPTPR_1BK_8K	MPTPR_PTP_DIV16 /* setting for 1 bank	*/
 
 /*
  * MAMR settings for SDRAM
  */
 
 /* 8 column SDRAM */
-#define CFG_MAMR_8COL	((CFG_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
+#define CONFIG_SYS_MAMR_8COL	((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
 			 MAMR_AMA_TYPE_0 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A11 |	\
 			 MAMR_RLFA_1X	 | MAMR_WLFA_1X	   | MAMR_TLFA_4X)
 /* 9 column SDRAM */
-#define CFG_MAMR_9COL	((CFG_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
+#define CONFIG_SYS_MAMR_9COL	((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
 			 MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 |	\
 			 MAMR_RLFA_1X	 | MAMR_WLFA_1X	   | MAMR_TLFA_4X)
 
diff --git a/include/configs/OCRTC.h b/include/configs/OCRTC.h
index 94b5bc965..32814d49f 100644
--- a/include/configs/OCRTC.h
+++ b/include/configs/OCRTC.h
@@ -48,8 +48,9 @@
 #define CONFIG_BOOTCOMMAND "go fff00100"
 
 #define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
-#define CFG_LOADS_BAUD_CHANGE	1	/* allow baudrate change	*/
+#define CONFIG_SYS_LOADS_BAUD_CHANGE	1	/* allow baudrate change	*/
 
+#define CONFIG_PPC4xx_EMAC
 #define CONFIG_MII		1	/* MII PHY management		*/
 #define CONFIG_PHY_ADDR		0	/* PHY address			*/
 #define CONFIG_LXT971_NO_SLEEP  1       /* disable sleep mode in LXT971 */
@@ -87,35 +88,35 @@
 /*
  * Miscellaneous configurable options
  */
-#define CFG_LONGHELP			/* undef to save memory		*/
-#define CFG_PROMPT	"=> "		/* Monitor Command Prompt	*/
+#define CONFIG_SYS_LONGHELP			/* undef to save memory		*/
+#define CONFIG_SYS_PROMPT	"=> "		/* Monitor Command Prompt	*/
 #if defined(CONFIG_CMD_KGDB)
-#define CFG_CBSIZE	1024		/* Console I/O Buffer Size	*/
+#define CONFIG_SYS_CBSIZE	1024		/* Console I/O Buffer Size	*/
 #else
-#define CFG_CBSIZE	256		/* Console I/O Buffer Size	*/
+#define CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size	*/
 #endif
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define CFG_MAXARGS	16		/* max number of command args	*/
-#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS	16		/* max number of command args	*/
+#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
 
-#define CFG_CONSOLE_INFO_QUIET	1	/* don't print console @ startup*/
+#define CONFIG_SYS_CONSOLE_INFO_QUIET	1	/* don't print console @ startup*/
 
-#define CFG_MEMTEST_START	0x0400000	/* memtest works on	*/
-#define CFG_MEMTEST_END		0x0C00000	/* 4 ... 12 MB in DRAM	*/
+#define CONFIG_SYS_MEMTEST_START	0x0400000	/* memtest works on	*/
+#define CONFIG_SYS_MEMTEST_END		0x0C00000	/* 4 ... 12 MB in DRAM	*/
 
-#undef	CFG_EXT_SERIAL_CLOCK	       /* no external serial clock used */
-#define CFG_IGNORE_405_UART_ERRATA_59	/* ignore ppc405gp errata #59	*/
-#define CFG_BASE_BAUD	    691200
+#undef	CONFIG_SYS_EXT_SERIAL_CLOCK	       /* no external serial clock used */
+#define CONFIG_SYS_IGNORE_405_UART_ERRATA_59	/* ignore ppc405gp errata #59	*/
+#define CONFIG_SYS_BASE_BAUD	    691200
 
 /* The following table includes the supported baudrates */
-#define CFG_BAUDRATE_TABLE	\
+#define CONFIG_SYS_BAUDRATE_TABLE	\
 	{ 300, 600, 1200, 2400, 4800, 9600, 19200, 38400,     \
 	 57600, 115200, 230400, 460800, 921600 }
 
-#define CFG_LOAD_ADDR	0x100000	/* default load address */
-#define CFG_EXTBDINFO	1		/* To use extended board_into (bd_t) */
+#define CONFIG_SYS_LOAD_ADDR	0x100000	/* default load address */
+#define CONFIG_SYS_EXTBDINFO	1		/* To use extended board_into (bd_t) */
 
-#define CFG_HZ		1000		/* decrementer freq: 1 ms ticks */
+#define CONFIG_SYS_HZ		1000		/* decrementer freq: 1 ms ticks */
 
 #define CONFIG_ZERO_BOOTDELAY_CHECK	/* check for keypress on bootdelay==0 */
 
@@ -136,72 +137,72 @@
 
 #define CONFIG_PCI_BOOTDELAY	1	/* enable pci bootdelay variable*/
 
-#define CFG_PCI_SUBSYS_VENDORID 0x12FE	/* PCI Vendor ID: esd gmbh	*/
-#define CFG_PCI_SUBSYS_DEVICEID 0x0410	/* PCI Device ID: OCRTC		*/
-#define CFG_PCI_CLASSCODE	0x0b20	/* PCI Class Code: Processor/PPC*/
-#define CFG_PCI_PTM1LA	0x00000000	/* point to sdram		*/
-#define CFG_PCI_PTM1MS	0xfc000001	/* 64MB, enable hard-wired to 1 */
-#define CFG_PCI_PTM1PCI 0x00000000	/* Host: use this pci address	*/
-#define CFG_PCI_PTM2LA	0xffc00000	/* point to flash		*/
-#define CFG_PCI_PTM2MS	0xffc00001	/* 4MB, enable			*/
-#define CFG_PCI_PTM2PCI 0x04000000	/* Host: use this pci address	*/
+#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x12FE	/* PCI Vendor ID: esd gmbh	*/
+#define CONFIG_SYS_PCI_SUBSYS_DEVICEID 0x0410	/* PCI Device ID: OCRTC		*/
+#define CONFIG_SYS_PCI_CLASSCODE	0x0b20	/* PCI Class Code: Processor/PPC*/
+#define CONFIG_SYS_PCI_PTM1LA	0x00000000	/* point to sdram		*/
+#define CONFIG_SYS_PCI_PTM1MS	0xfc000001	/* 64MB, enable hard-wired to 1 */
+#define CONFIG_SYS_PCI_PTM1PCI 0x00000000	/* Host: use this pci address	*/
+#define CONFIG_SYS_PCI_PTM2LA	0xffc00000	/* point to flash		*/
+#define CONFIG_SYS_PCI_PTM2MS	0xffc00001	/* 4MB, enable			*/
+#define CONFIG_SYS_PCI_PTM2PCI 0x04000000	/* Host: use this pci address	*/
 
 /*-----------------------------------------------------------------------
  * Start addresses for the final memory configuration
  * (Set up by the startup code)
- * Please note that CFG_SDRAM_BASE _must_ start at 0
+ * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
  */
-#define CFG_SDRAM_BASE		0x00000000
-#define CFG_FLASH_BASE		0xFFFD0000
-#define CFG_MONITOR_BASE	CFG_FLASH_BASE
-#define CFG_MONITOR_LEN		(192 * 1024)	/* Reserve 192 kB for Monitor	*/
-#define CFG_MALLOC_LEN		(128 * 1024)	/* Reserve 128 kB for malloc()	*/
+#define CONFIG_SYS_SDRAM_BASE		0x00000000
+#define CONFIG_SYS_FLASH_BASE		0xFFFD0000
+#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_FLASH_BASE
+#define CONFIG_SYS_MONITOR_LEN		(192 * 1024)	/* Reserve 192 kB for Monitor	*/
+#define CONFIG_SYS_MALLOC_LEN		(128 * 1024)	/* Reserve 128 kB for malloc()	*/
 
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
+#define CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
 /*-----------------------------------------------------------------------
  * FLASH organization
  */
-#define CFG_MAX_FLASH_BANKS	2	/* max number of memory banks		*/
-#define CFG_MAX_FLASH_SECT	256	/* max number of sectors on one chip	*/
+#define CONFIG_SYS_MAX_FLASH_BANKS	2	/* max number of memory banks		*/
+#define CONFIG_SYS_MAX_FLASH_SECT	256	/* max number of sectors on one chip	*/
 
-#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
-#define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
+#define CONFIG_SYS_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
+#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
 
-#define CFG_FLASH_WORD_SIZE	unsigned short	/* flash word size (width)	*/
-#define CFG_FLASH_ADDR0		0x5555	/* 1st address for flash config cycles	*/
-#define CFG_FLASH_ADDR1		0x2AAA	/* 2nd address for flash config cycles	*/
+#define CONFIG_SYS_FLASH_WORD_SIZE	unsigned short	/* flash word size (width)	*/
+#define CONFIG_SYS_FLASH_ADDR0		0x5555	/* 1st address for flash config cycles	*/
+#define CONFIG_SYS_FLASH_ADDR1		0x2AAA	/* 2nd address for flash config cycles	*/
 /*
  * The following defines are added for buggy IOP480 byte interface.
  * All other boards should use the standard values (CPCI405 etc.)
  */
-#define CFG_FLASH_READ0		0x0000	/* 0 is standard			*/
-#define CFG_FLASH_READ1		0x0001	/* 1 is standard			*/
-#define CFG_FLASH_READ2		0x0002	/* 2 is standard			*/
+#define CONFIG_SYS_FLASH_READ0		0x0000	/* 0 is standard			*/
+#define CONFIG_SYS_FLASH_READ1		0x0001	/* 1 is standard			*/
+#define CONFIG_SYS_FLASH_READ2		0x0002	/* 2 is standard			*/
 
-#define CFG_FLASH_EMPTY_INFO		/* print 'E' for empty sector on flinfo */
+#define CONFIG_SYS_FLASH_EMPTY_INFO		/* print 'E' for empty sector on flinfo */
 
 #if 0 /* Use NVRAM for environment variables */
 /*-----------------------------------------------------------------------
  * NVRAM organization
  */
-#define CFG_ENV_IS_IN_NVRAM	1	/* use NVRAM for environment vars	*/
-#define CFG_NVRAM_BASE_ADDR	0xf0200000		/* NVRAM base address	*/
-#define CFG_NVRAM_SIZE		(32*1024)		/* NVRAM size		*/
-#define CFG_ENV_SIZE		0x1000		/* Size of Environment vars	*/
-#define CFG_ENV_ADDR		\
-	(CFG_NVRAM_BASE_ADDR+CFG_NVRAM_SIZE-CFG_ENV_SIZE)	/* Env	*/
-#define CFG_NVRAM_VXWORKS_OFFS	0x6900		/* Offset for VxWorks eth-addr	*/
+#define CONFIG_ENV_IS_IN_NVRAM	1	/* use NVRAM for environment vars	*/
+#define CONFIG_SYS_NVRAM_BASE_ADDR	0xf0200000		/* NVRAM base address	*/
+#define CONFIG_SYS_NVRAM_SIZE		(32*1024)		/* NVRAM size		*/
+#define CONFIG_ENV_SIZE		0x1000		/* Size of Environment vars	*/
+#define CONFIG_ENV_ADDR		\
+	(CONFIG_SYS_NVRAM_BASE_ADDR+CONFIG_SYS_NVRAM_SIZE-CONFIG_ENV_SIZE)	/* Env	*/
+#define CONFIG_SYS_NVRAM_VXWORKS_OFFS	0x6900		/* Offset for VxWorks eth-addr	*/
 
 #else /* Use EEPROM for environment variables */
 
-#define CFG_ENV_IS_IN_EEPROM	1	/* use EEPROM for environment vars */
-#define CFG_ENV_OFFSET		0x000	/* environment starts at the beginning of the EEPROM */
-#define CFG_ENV_SIZE		0x300	/* 768 bytes may be used for env vars */
+#define CONFIG_ENV_IS_IN_EEPROM	1	/* use EEPROM for environment vars */
+#define CONFIG_ENV_OFFSET		0x000	/* environment starts at the beginning of the EEPROM */
+#define CONFIG_ENV_SIZE		0x300	/* 768 bytes may be used for env vars */
 				   /* total size of a CAT24WC08 is 1024 bytes */
 #endif
 
@@ -209,18 +210,17 @@
  * I2C EEPROM (CAT24WC08) for environment
  */
 #define CONFIG_HARD_I2C			/* I2c with hardware support */
-#define CFG_I2C_SPEED		400000	/* I2C speed and slave address */
-#define CFG_I2C_SLAVE		0x7F
+#define CONFIG_SYS_I2C_SPEED		400000	/* I2C speed and slave address */
+#define CONFIG_SYS_I2C_SLAVE		0x7F
 
-#define CFG_I2C_EEPROM_ADDR	0x50	/* EEPROM CAT28WC08		*/
-#define CFG_I2C_EEPROM_ADDR_LEN 1	/* Bytes of address		*/
+#define CONFIG_SYS_I2C_EEPROM_ADDR	0x50	/* EEPROM CAT28WC08		*/
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1	/* Bytes of address		*/
 /* mask of address bits that overflow into the "EEPROM chip address"	*/
-#define CFG_I2C_EEPROM_ADDR_OVERFLOW	0x07
-#define CFG_EEPROM_PAGE_WRITE_BITS 4	/* The Catalyst CAT24WC08 has	*/
+#define CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW	0x07
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 4	/* The Catalyst CAT24WC08 has	*/
 					/* 16 byte page write mode using*/
 					/* last 4 bits of the address	*/
-#define CFG_EEPROM_PAGE_WRITE_DELAY_MS	10   /* and takes up to 10 msec */
-#define CFG_EEPROM_PAGE_WRITE_ENABLE
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	10   /* and takes up to 10 msec */
 
 /*
  * Init Memory Controller:
@@ -236,62 +236,62 @@
  */
 
 /* Memory Bank 0 (Flash Bank 0) initialization					*/
-#define CFG_EBC_PB0AP		0x92015480
-#define CFG_EBC_PB0CR		0xFFC5A000  /* BAS=0xFFC,BS=4MB,BU=R/W,BW=16bit */
+#define CONFIG_SYS_EBC_PB0AP		0x92015480
+#define CONFIG_SYS_EBC_PB0CR		0xFFC5A000  /* BAS=0xFFC,BS=4MB,BU=R/W,BW=16bit */
 
 /* Memory Bank 1 (Flash Bank 1) initialization					*/
-#define CFG_EBC_PB1AP		0x92015480
-#define CFG_EBC_PB1CR		0xFF85A000  /* BAS=0xFF8,BS=4MB,BU=R/W,BW=16bit */
+#define CONFIG_SYS_EBC_PB1AP		0x92015480
+#define CONFIG_SYS_EBC_PB1CR		0xFF85A000  /* BAS=0xFF8,BS=4MB,BU=R/W,BW=16bit */
 
 /* Memory Bank 2 (PLD - FPGA-boot) initialization				*/
-#define CFG_EBC_PB2AP		0x02015480  /* BME=0x0,TWT=0x04,CSN=0x0,OEN=0x1 */
+#define CONFIG_SYS_EBC_PB2AP		0x02015480  /* BME=0x0,TWT=0x04,CSN=0x0,OEN=0x1 */
 					    /* WBN=0x1,WBF=0x1,TH=0x2,RE=0x0,SOR=0x1,BEM=0x0,PEN=0x0*/
-#define CFG_EBC_PB2CR		0xF0018000  /* BAS=0xF00,BS=1MB,BU=R/W,BW=8bit	*/
+#define CONFIG_SYS_EBC_PB2CR		0xF0018000  /* BAS=0xF00,BS=1MB,BU=R/W,BW=8bit	*/
 
 /* Memory Bank 3 (PLD - OSL) initialization					*/
-#define CFG_EBC_PB3AP		0x02015480  /* BME=0x0,TWT=0x04,CSN=0x0,OEN=0x1 */
+#define CONFIG_SYS_EBC_PB3AP		0x02015480  /* BME=0x0,TWT=0x04,CSN=0x0,OEN=0x1 */
 					    /* WBN=0x1,WBF=0x1,TH=0x2,RE=0x0,SOR=0x1,BEM=0x0,PEN=0x0*/
-#define CFG_EBC_PB3CR		0xF0118000  /* BAS=0xF01,BS=1MB,BU=R/W,BW=8bit	*/
+#define CONFIG_SYS_EBC_PB3CR		0xF0118000  /* BAS=0xF01,BS=1MB,BU=R/W,BW=8bit	*/
 
 /* Memory Bank 4 (Spartan2 1) initialization					*/
-#define CFG_EBC_PB4AP		0x02015580  /* BME=0x0,TWT=0x04,CSN=0x0,OEN=0x1 */
+#define CONFIG_SYS_EBC_PB4AP		0x02015580  /* BME=0x0,TWT=0x04,CSN=0x0,OEN=0x1 */
 					    /* WBN=0x1,WBF=0x1,TH=0x2,RE=0x1,SOR=0x1,BEM=0x0,PEN=0x0*/
-#define CFG_EBC_PB4CR		0xF209C000  /* BAS=0xF20,BS=16MB,BU=R/W,BW=32bit*/
+#define CONFIG_SYS_EBC_PB4CR		0xF209C000  /* BAS=0xF20,BS=16MB,BU=R/W,BW=32bit*/
 
 /* Memory Bank 5 (Spartan2 2) initialization					*/
-#define CFG_EBC_PB5AP		0x02015580  /* BME=0x0,TWT=0x04,CSN=0x0,OEN=0x1 */
+#define CONFIG_SYS_EBC_PB5AP		0x02015580  /* BME=0x0,TWT=0x04,CSN=0x0,OEN=0x1 */
 					    /* WBN=0x1,WBF=0x1,TH=0x2,RE=0x1,SOR=0x1,BEM=0x0,PEN=0x0*/
-#define CFG_EBC_PB5CR		0xF309C000  /* BAS=0xF30,BS=16MB,BU=R/W,BW=32bit*/
+#define CONFIG_SYS_EBC_PB5CR		0xF309C000  /* BAS=0xF30,BS=16MB,BU=R/W,BW=32bit*/
 
 /* Memory Bank 6 (Virtex 1) initialization					*/
-#define CFG_EBC_PB6AP		0x02015580  /* BME=0x0,TWT=0x04,CSN=0x0,OEN=0x1 */
+#define CONFIG_SYS_EBC_PB6AP		0x02015580  /* BME=0x0,TWT=0x04,CSN=0x0,OEN=0x1 */
 					    /* WBN=0x1,WBF=0x1,TH=0x2,RE=0x1,SOR=0x1,BEM=0x0,PEN=0x0*/
-#define CFG_EBC_PB6CR		0xF409A000  /* BAS=0xF40,BS=16MB,BU=R/W,BW=16bit*/
+#define CONFIG_SYS_EBC_PB6CR		0xF409A000  /* BAS=0xF40,BS=16MB,BU=R/W,BW=16bit*/
 
 /* Memory Bank 7 (Virtex 2) initialization					*/
-#define CFG_EBC_PB7AP		0x02015580  /* BME=0x0,TWT=0x04,CSN=0x0,OEN=0x1 */
+#define CONFIG_SYS_EBC_PB7AP		0x02015580  /* BME=0x0,TWT=0x04,CSN=0x0,OEN=0x1 */
 					    /* WBN=0x1,WBF=0x1,TH=0x2,RE=0x1,SOR=0x1,BEM=0x0,PEN=0x0*/
-#define CFG_EBC_PB7CR		0xF509A000  /* BAS=0xF50,BS=16MB,BU=R/W,BW=16bit*/
+#define CONFIG_SYS_EBC_PB7CR		0xF509A000  /* BAS=0xF50,BS=16MB,BU=R/W,BW=16bit*/
 
 
-#define CFG_VXWORKS_MAC_PTR	0x00000000	/* Pass Ethernet MAC to VxWorks */
+#define CONFIG_SYS_VXWORKS_MAC_PTR	0x00000000	/* Pass Ethernet MAC to VxWorks */
 
 /*-----------------------------------------------------------------------
  * Definitions for initial stack pointer and data area (in DPRAM)
  */
 
 /* use on chip memory ( OCM ) for temperary stack until sdram is tested */
-#define CFG_TEMP_STACK_OCM	  1
+#define CONFIG_SYS_TEMP_STACK_OCM	  1
 
 /* On Chip Memory location */
-#define CFG_OCM_DATA_ADDR	0xF8000000
-#define CFG_OCM_DATA_SIZE	0x1000
-
-#define CFG_INIT_RAM_ADDR	CFG_OCM_DATA_ADDR /* inside of SDRAM		*/
-#define CFG_INIT_RAM_END	CFG_OCM_DATA_SIZE /* End of used area in RAM	*/
-#define CFG_GBL_DATA_SIZE      128  /* size in bytes reserved for initial data */
-#define CFG_GBL_DATA_OFFSET    (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_OCM_DATA_ADDR	0xF8000000
+#define CONFIG_SYS_OCM_DATA_SIZE	0x1000
+
+#define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_OCM_DATA_ADDR /* inside of SDRAM		*/
+#define CONFIG_SYS_INIT_RAM_END	CONFIG_SYS_OCM_DATA_SIZE /* End of used area in RAM	*/
+#define CONFIG_SYS_GBL_DATA_SIZE      128  /* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET    (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
 
 /*
diff --git a/include/configs/ORSG.h b/include/configs/ORSG.h
index 4e030885f..58e9328e4 100644
--- a/include/configs/ORSG.h
+++ b/include/configs/ORSG.h
@@ -48,8 +48,9 @@
 #define CONFIG_BOOTCOMMAND "go fff00100"
 
 #define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
-#define CFG_LOADS_BAUD_CHANGE	1	/* allow baudrate change	*/
+#define CONFIG_SYS_LOADS_BAUD_CHANGE	1	/* allow baudrate change	*/
 
+#define CONFIG_PPC4xx_EMAC
 #define CONFIG_MII		1	/* MII PHY management		*/
 #define CONFIG_PHY_ADDR		0	/* PHY address			*/
 #define CONFIG_LXT971_NO_SLEEP  1       /* disable sleep mode in LXT971 */
@@ -87,35 +88,35 @@
 /*
  * Miscellaneous configurable options
  */
-#define CFG_LONGHELP			/* undef to save memory		*/
-#define CFG_PROMPT	"=> "		/* Monitor Command Prompt	*/
+#define CONFIG_SYS_LONGHELP			/* undef to save memory		*/
+#define CONFIG_SYS_PROMPT	"=> "		/* Monitor Command Prompt	*/
 #if defined(CONFIG_CMD_KGDB)
-#define CFG_CBSIZE	1024		/* Console I/O Buffer Size	*/
+#define CONFIG_SYS_CBSIZE	1024		/* Console I/O Buffer Size	*/
 #else
-#define CFG_CBSIZE	256		/* Console I/O Buffer Size	*/
+#define CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size	*/
 #endif
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define CFG_MAXARGS	16		/* max number of command args	*/
-#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS	16		/* max number of command args	*/
+#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
 
-#define CFG_CONSOLE_INFO_QUIET	1	/* don't print console @ startup*/
+#define CONFIG_SYS_CONSOLE_INFO_QUIET	1	/* don't print console @ startup*/
 
-#define CFG_MEMTEST_START	0x0400000	/* memtest works on	*/
-#define CFG_MEMTEST_END		0x0C00000	/* 4 ... 12 MB in DRAM	*/
+#define CONFIG_SYS_MEMTEST_START	0x0400000	/* memtest works on	*/
+#define CONFIG_SYS_MEMTEST_END		0x0C00000	/* 4 ... 12 MB in DRAM	*/
 
-#undef	CFG_EXT_SERIAL_CLOCK	       /* no external serial clock used */
-#define CFG_IGNORE_405_UART_ERRATA_59	/* ignore ppc405gp errata #59	*/
-#define CFG_BASE_BAUD	    691200
+#undef	CONFIG_SYS_EXT_SERIAL_CLOCK	       /* no external serial clock used */
+#define CONFIG_SYS_IGNORE_405_UART_ERRATA_59	/* ignore ppc405gp errata #59	*/
+#define CONFIG_SYS_BASE_BAUD	    691200
 
 /* The following table includes the supported baudrates */
-#define CFG_BAUDRATE_TABLE	\
+#define CONFIG_SYS_BAUDRATE_TABLE	\
 	{ 300, 600, 1200, 2400, 4800, 9600, 19200, 38400,     \
 	 57600, 115200, 230400, 460800, 921600 }
 
-#define CFG_LOAD_ADDR	0x100000	/* default load address */
-#define CFG_EXTBDINFO	1		/* To use extended board_into (bd_t) */
+#define CONFIG_SYS_LOAD_ADDR	0x100000	/* default load address */
+#define CONFIG_SYS_EXTBDINFO	1		/* To use extended board_into (bd_t) */
 
-#define CFG_HZ		1000		/* decrementer freq: 1 ms ticks */
+#define CONFIG_SYS_HZ		1000		/* decrementer freq: 1 ms ticks */
 
 #define CONFIG_ZERO_BOOTDELAY_CHECK	/* check for keypress on bootdelay==0 */
 
@@ -134,72 +135,72 @@
 
 #undef	CONFIG_PCI_SCAN_SHOW		/* print pci devices @ startup	*/
 
-#define CFG_PCI_SUBSYS_VENDORID 0x12FE	/* PCI Vendor ID: esd gmbh	*/
-#define CFG_PCI_SUBSYS_DEVICEID 0x0411	/* PCI Device ID: ORSG		*/
-#define CFG_PCI_CLASSCODE	0x0b20	/* PCI Class Code: Processor/PPC*/
-#define CFG_PCI_PTM1LA	0x00000000	/* point to sdram		*/
-#define CFG_PCI_PTM1MS	0xfc000001	/* 64MB, enable hard-wired to 1 */
-#define CFG_PCI_PTM1PCI 0x00000000	/* Host: use this pci address	*/
-#define CFG_PCI_PTM2LA	0xffc00000	/* point to flash		*/
-#define CFG_PCI_PTM2MS	0xffc00001	/* 4MB, enable			*/
-#define CFG_PCI_PTM2PCI 0x04000000	/* Host: use this pci address	*/
+#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x12FE	/* PCI Vendor ID: esd gmbh	*/
+#define CONFIG_SYS_PCI_SUBSYS_DEVICEID 0x0411	/* PCI Device ID: ORSG		*/
+#define CONFIG_SYS_PCI_CLASSCODE	0x0b20	/* PCI Class Code: Processor/PPC*/
+#define CONFIG_SYS_PCI_PTM1LA	0x00000000	/* point to sdram		*/
+#define CONFIG_SYS_PCI_PTM1MS	0xfc000001	/* 64MB, enable hard-wired to 1 */
+#define CONFIG_SYS_PCI_PTM1PCI 0x00000000	/* Host: use this pci address	*/
+#define CONFIG_SYS_PCI_PTM2LA	0xffc00000	/* point to flash		*/
+#define CONFIG_SYS_PCI_PTM2MS	0xffc00001	/* 4MB, enable			*/
+#define CONFIG_SYS_PCI_PTM2PCI 0x04000000	/* Host: use this pci address	*/
 
 /*-----------------------------------------------------------------------
  * Start addresses for the final memory configuration
  * (Set up by the startup code)
- * Please note that CFG_SDRAM_BASE _must_ start at 0
+ * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
  */
-#define CFG_SDRAM_BASE		0x00000000
-#define CFG_FLASH_BASE		0xFFFD0000
-#define CFG_MONITOR_BASE	CFG_FLASH_BASE
-#define CFG_MONITOR_LEN		(192 * 1024)	/* Reserve 192 kB for Monitor	*/
-#define CFG_MALLOC_LEN		(128 * 1024)	/* Reserve 128 kB for malloc()	*/
+#define CONFIG_SYS_SDRAM_BASE		0x00000000
+#define CONFIG_SYS_FLASH_BASE		0xFFFD0000
+#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_FLASH_BASE
+#define CONFIG_SYS_MONITOR_LEN		(192 * 1024)	/* Reserve 192 kB for Monitor	*/
+#define CONFIG_SYS_MALLOC_LEN		(128 * 1024)	/* Reserve 128 kB for malloc()	*/
 
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
+#define CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
 /*-----------------------------------------------------------------------
  * FLASH organization
  */
-#define CFG_MAX_FLASH_BANKS	2	/* max number of memory banks		*/
-#define CFG_MAX_FLASH_SECT	256	/* max number of sectors on one chip	*/
+#define CONFIG_SYS_MAX_FLASH_BANKS	2	/* max number of memory banks		*/
+#define CONFIG_SYS_MAX_FLASH_SECT	256	/* max number of sectors on one chip	*/
 
-#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
-#define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
+#define CONFIG_SYS_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
+#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
 
-#define CFG_FLASH_WORD_SIZE	unsigned short	/* flash word size (width)	*/
-#define CFG_FLASH_ADDR0		0x5555	/* 1st address for flash config cycles	*/
-#define CFG_FLASH_ADDR1		0x2AAA	/* 2nd address for flash config cycles	*/
+#define CONFIG_SYS_FLASH_WORD_SIZE	unsigned short	/* flash word size (width)	*/
+#define CONFIG_SYS_FLASH_ADDR0		0x5555	/* 1st address for flash config cycles	*/
+#define CONFIG_SYS_FLASH_ADDR1		0x2AAA	/* 2nd address for flash config cycles	*/
 /*
  * The following defines are added for buggy IOP480 byte interface.
  * All other boards should use the standard values (CPCI405 etc.)
  */
-#define CFG_FLASH_READ0		0x0000	/* 0 is standard			*/
-#define CFG_FLASH_READ1		0x0001	/* 1 is standard			*/
-#define CFG_FLASH_READ2		0x0002	/* 2 is standard			*/
+#define CONFIG_SYS_FLASH_READ0		0x0000	/* 0 is standard			*/
+#define CONFIG_SYS_FLASH_READ1		0x0001	/* 1 is standard			*/
+#define CONFIG_SYS_FLASH_READ2		0x0002	/* 2 is standard			*/
 
-#define CFG_FLASH_EMPTY_INFO		/* print 'E' for empty sector on flinfo */
+#define CONFIG_SYS_FLASH_EMPTY_INFO		/* print 'E' for empty sector on flinfo */
 
 #if 0 /* Use NVRAM for environment variables */
 /*-----------------------------------------------------------------------
  * NVRAM organization
  */
-#define CFG_ENV_IS_IN_NVRAM	1	/* use NVRAM for environment vars	*/
-#define CFG_NVRAM_BASE_ADDR	0xf0200000		/* NVRAM base address	*/
-#define CFG_NVRAM_SIZE		(32*1024)		/* NVRAM size		*/
-#define CFG_ENV_SIZE		0x1000		/* Size of Environment vars	*/
-#define CFG_ENV_ADDR		\
-	(CFG_NVRAM_BASE_ADDR+CFG_NVRAM_SIZE-CFG_ENV_SIZE)	/* Env	*/
-#define CFG_NVRAM_VXWORKS_OFFS	0x6900		/* Offset for VxWorks eth-addr	*/
+#define CONFIG_ENV_IS_IN_NVRAM	1	/* use NVRAM for environment vars	*/
+#define CONFIG_SYS_NVRAM_BASE_ADDR	0xf0200000		/* NVRAM base address	*/
+#define CONFIG_SYS_NVRAM_SIZE		(32*1024)		/* NVRAM size		*/
+#define CONFIG_ENV_SIZE		0x1000		/* Size of Environment vars	*/
+#define CONFIG_ENV_ADDR		\
+	(CONFIG_SYS_NVRAM_BASE_ADDR+CONFIG_SYS_NVRAM_SIZE-CONFIG_ENV_SIZE)	/* Env	*/
+#define CONFIG_SYS_NVRAM_VXWORKS_OFFS	0x6900		/* Offset for VxWorks eth-addr	*/
 
 #else /* Use EEPROM for environment variables */
 
-#define CFG_ENV_IS_IN_EEPROM	1	/* use EEPROM for environment vars */
-#define CFG_ENV_OFFSET		0x000	/* environment starts at the beginning of the EEPROM */
-#define CFG_ENV_SIZE		0x300	/* 768 bytes may be used for env vars */
+#define CONFIG_ENV_IS_IN_EEPROM	1	/* use EEPROM for environment vars */
+#define CONFIG_ENV_OFFSET		0x000	/* environment starts at the beginning of the EEPROM */
+#define CONFIG_ENV_SIZE		0x300	/* 768 bytes may be used for env vars */
 				   /* total size of a CAT24WC08 is 1024 bytes */
 #endif
 
@@ -207,18 +208,17 @@
  * I2C EEPROM (CAT24WC08) for environment
  */
 #define CONFIG_HARD_I2C			/* I2c with hardware support */
-#define CFG_I2C_SPEED		400000	/* I2C speed and slave address */
-#define CFG_I2C_SLAVE		0x7F
+#define CONFIG_SYS_I2C_SPEED		400000	/* I2C speed and slave address */
+#define CONFIG_SYS_I2C_SLAVE		0x7F
 
-#define CFG_I2C_EEPROM_ADDR	0x50	/* EEPROM CAT28WC08		*/
-#define CFG_I2C_EEPROM_ADDR_LEN 1	/* Bytes of address		*/
+#define CONFIG_SYS_I2C_EEPROM_ADDR	0x50	/* EEPROM CAT28WC08		*/
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1	/* Bytes of address		*/
 /* mask of address bits that overflow into the "EEPROM chip address"	*/
-#define CFG_I2C_EEPROM_ADDR_OVERFLOW	0x07
-#define CFG_EEPROM_PAGE_WRITE_BITS 4	/* The Catalyst CAT24WC08 has	*/
+#define CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW	0x07
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 4	/* The Catalyst CAT24WC08 has	*/
 					/* 16 byte page write mode using*/
 					/* last 4 bits of the address	*/
-#define CFG_EEPROM_PAGE_WRITE_DELAY_MS	10   /* and takes up to 10 msec */
-#define CFG_EEPROM_PAGE_WRITE_ENABLE
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	10   /* and takes up to 10 msec */
 
 /*
  * Init Memory Controller:
@@ -234,62 +234,62 @@
  */
 
 /* Memory Bank 0 (Flash Bank 0) initialization					*/
-#define CFG_EBC_PB0AP		0x92015480
-#define CFG_EBC_PB0CR		0xFFC5A000  /* BAS=0xFFC,BS=4MB,BU=R/W,BW=16bit */
+#define CONFIG_SYS_EBC_PB0AP		0x92015480
+#define CONFIG_SYS_EBC_PB0CR		0xFFC5A000  /* BAS=0xFFC,BS=4MB,BU=R/W,BW=16bit */
 
 /* Memory Bank 1 (Flash Bank 1) initialization					*/
-#define CFG_EBC_PB1AP		0x92015480
-#define CFG_EBC_PB1CR		0xFF85A000  /* BAS=0xFF8,BS=4MB,BU=R/W,BW=16bit */
+#define CONFIG_SYS_EBC_PB1AP		0x92015480
+#define CONFIG_SYS_EBC_PB1CR		0xFF85A000  /* BAS=0xFF8,BS=4MB,BU=R/W,BW=16bit */
 
 /* Memory Bank 2 (PLD - FPGA-boot) initialization				*/
-#define CFG_EBC_PB2AP		0x02015480  /* BME=0x0,TWT=0x04,CSN=0x0,OEN=0x1 */
+#define CONFIG_SYS_EBC_PB2AP		0x02015480  /* BME=0x0,TWT=0x04,CSN=0x0,OEN=0x1 */
 					    /* WBN=0x1,WBF=0x1,TH=0x2,RE=0x0,SOR=0x1,BEM=0x0,PEN=0x0*/
-#define CFG_EBC_PB2CR		0xF0018000  /* BAS=0xF00,BS=1MB,BU=R/W,BW=8bit	*/
+#define CONFIG_SYS_EBC_PB2CR		0xF0018000  /* BAS=0xF00,BS=1MB,BU=R/W,BW=8bit	*/
 
 /* Memory Bank 3 (PLD - OSL) initialization					*/
-#define CFG_EBC_PB3AP		0x02015480  /* BME=0x0,TWT=0x04,CSN=0x0,OEN=0x1 */
+#define CONFIG_SYS_EBC_PB3AP		0x02015480  /* BME=0x0,TWT=0x04,CSN=0x0,OEN=0x1 */
 					    /* WBN=0x1,WBF=0x1,TH=0x2,RE=0x0,SOR=0x1,BEM=0x0,PEN=0x0*/
-#define CFG_EBC_PB3CR		0xF0118000  /* BAS=0xF01,BS=1MB,BU=R/W,BW=8bit	*/
+#define CONFIG_SYS_EBC_PB3CR		0xF0118000  /* BAS=0xF01,BS=1MB,BU=R/W,BW=8bit	*/
 
 /* Memory Bank 4 (Spartan2 1) initialization					*/
-#define CFG_EBC_PB4AP		0x02015580  /* BME=0x0,TWT=0x04,CSN=0x0,OEN=0x1 */
+#define CONFIG_SYS_EBC_PB4AP		0x02015580  /* BME=0x0,TWT=0x04,CSN=0x0,OEN=0x1 */
 					    /* WBN=0x1,WBF=0x1,TH=0x2,RE=0x1,SOR=0x1,BEM=0x0,PEN=0x0*/
-#define CFG_EBC_PB4CR		0xF209C000  /* BAS=0xF20,BS=16MB,BU=R/W,BW=32bit*/
+#define CONFIG_SYS_EBC_PB4CR		0xF209C000  /* BAS=0xF20,BS=16MB,BU=R/W,BW=32bit*/
 
 /* Memory Bank 5 (Spartan2 2) initialization					*/
-#define CFG_EBC_PB5AP		0x02015580  /* BME=0x0,TWT=0x04,CSN=0x0,OEN=0x1 */
+#define CONFIG_SYS_EBC_PB5AP		0x02015580  /* BME=0x0,TWT=0x04,CSN=0x0,OEN=0x1 */
 					    /* WBN=0x1,WBF=0x1,TH=0x2,RE=0x1,SOR=0x1,BEM=0x0,PEN=0x0*/
-#define CFG_EBC_PB5CR		0xF309C000  /* BAS=0xF30,BS=16MB,BU=R/W,BW=32bit*/
+#define CONFIG_SYS_EBC_PB5CR		0xF309C000  /* BAS=0xF30,BS=16MB,BU=R/W,BW=32bit*/
 
 /* Memory Bank 6 (Virtex 1) initialization					*/
-#define CFG_EBC_PB6AP		0x02015580  /* BME=0x0,TWT=0x04,CSN=0x0,OEN=0x1 */
+#define CONFIG_SYS_EBC_PB6AP		0x02015580  /* BME=0x0,TWT=0x04,CSN=0x0,OEN=0x1 */
 					    /* WBN=0x1,WBF=0x1,TH=0x2,RE=0x1,SOR=0x1,BEM=0x0,PEN=0x0*/
-#define CFG_EBC_PB6CR		0xF409A000  /* BAS=0xF40,BS=16MB,BU=R/W,BW=16bit*/
+#define CONFIG_SYS_EBC_PB6CR		0xF409A000  /* BAS=0xF40,BS=16MB,BU=R/W,BW=16bit*/
 
 /* Memory Bank 7 (Virtex 2) initialization					*/
-#define CFG_EBC_PB7AP		0x02015580  /* BME=0x0,TWT=0x04,CSN=0x0,OEN=0x1 */
+#define CONFIG_SYS_EBC_PB7AP		0x02015580  /* BME=0x0,TWT=0x04,CSN=0x0,OEN=0x1 */
 					    /* WBN=0x1,WBF=0x1,TH=0x2,RE=0x1,SOR=0x1,BEM=0x0,PEN=0x0*/
-#define CFG_EBC_PB7CR		0xF509A000  /* BAS=0xF50,BS=16MB,BU=R/W,BW=16bit*/
+#define CONFIG_SYS_EBC_PB7CR		0xF509A000  /* BAS=0xF50,BS=16MB,BU=R/W,BW=16bit*/
 
 
-#define CFG_VXWORKS_MAC_PTR	0x00000000	/* Pass Ethernet MAC to VxWorks */
+#define CONFIG_SYS_VXWORKS_MAC_PTR	0x00000000	/* Pass Ethernet MAC to VxWorks */
 
 /*-----------------------------------------------------------------------
  * Definitions for initial stack pointer and data area (in DPRAM)
  */
 
 /* use on chip memory ( OCM ) for temperary stack until sdram is tested */
-#define CFG_TEMP_STACK_OCM	  1
+#define CONFIG_SYS_TEMP_STACK_OCM	  1
 
 /* On Chip Memory location */
-#define CFG_OCM_DATA_ADDR	0xF8000000
-#define CFG_OCM_DATA_SIZE	0x1000
-
-#define CFG_INIT_RAM_ADDR	CFG_OCM_DATA_ADDR /* inside of SDRAM		*/
-#define CFG_INIT_RAM_END	CFG_OCM_DATA_SIZE /* End of used area in RAM	*/
-#define CFG_GBL_DATA_SIZE      128  /* size in bytes reserved for initial data */
-#define CFG_GBL_DATA_OFFSET    (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_OCM_DATA_ADDR	0xF8000000
+#define CONFIG_SYS_OCM_DATA_SIZE	0x1000
+
+#define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_OCM_DATA_ADDR /* inside of SDRAM		*/
+#define CONFIG_SYS_INIT_RAM_END	CONFIG_SYS_OCM_DATA_SIZE /* End of used area in RAM	*/
+#define CONFIG_SYS_GBL_DATA_SIZE      128  /* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET    (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
 
 /*
diff --git a/include/configs/OXC.h b/include/configs/OXC.h
index 8d61bcd2d..104c23f92 100644
--- a/include/configs/OXC.h
+++ b/include/configs/OXC.h
@@ -49,7 +49,7 @@
 
 #define CONFIG_CONS_INDEX	1
 #define CONFIG_BAUDRATE		9600
-#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
 
 
 /*
@@ -72,14 +72,14 @@
 /*
  * Miscellaneous configurable options
  */
-#define CFG_LONGHELP		1		/* undef to save memory		*/
-#define CFG_PROMPT		"=> "		/* Monitor Command Prompt	*/
-#define CFG_CBSIZE		256		/* Console I/O Buffer Size	*/
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16)	/* Print Buffer Size	*/
-#define CFG_MAXARGS		16		/* max number of command args	*/
-#define CFG_BARGSIZE		CFG_CBSIZE	/* Boot Argument Buffer Size	*/
-#define CFG_LOAD_ADDR		0x00100000	/* default load address		*/
-#define CFG_HZ			1000		/* decrementer freq: 1 ms ticks */
+#define CONFIG_SYS_LONGHELP		1		/* undef to save memory		*/
+#define CONFIG_SYS_PROMPT		"=> "		/* Monitor Command Prompt	*/
+#define CONFIG_SYS_CBSIZE		256		/* Console I/O Buffer Size	*/
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)	/* Print Buffer Size	*/
+#define CONFIG_SYS_MAXARGS		16		/* max number of command args	*/
+#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
+#define CONFIG_SYS_LOAD_ADDR		0x00100000	/* default load address		*/
+#define CONFIG_SYS_HZ			1000		/* decrementer freq: 1 ms ticks */
 
 #define CONFIG_MISC_INIT_R	1		/* call misc_init_r() on init	*/
 
@@ -95,8 +95,8 @@
 #define CONFIG_BOOTCOMMAND	"tftp 0x10000 ; bootelf 0x10000"
 #define CONFIG_BOOTDELAY	10
 
-#define CFG_OXC_GENERATE_IP	1		/* Generate IP automatically	*/
-#define CFG_OXC_IPMASK		0x0A000000	/* 10.0.0.x			*/
+#define CONFIG_SYS_OXC_GENERATE_IP	1		/* Generate IP automatically	*/
+#define CONFIG_SYS_OXC_IPMASK		0x0A000000	/* 10.0.0.x			*/
 
 /*-----------------------------------------------------------------------
  * PCI stuff
@@ -107,7 +107,7 @@
 #define CONFIG_NET_MULTI			/* Multi ethernet cards support */
 
 #define CONFIG_EEPRO100				/* Ethernet Express PRO 100	*/
-#define CFG_RX_ETH_BUFFER	8               /* use 8 rx buffer on eepro100  */
+#define CONFIG_SYS_RX_ETH_BUFFER	8               /* use 8 rx buffer on eepro100  */
 
 #define PCI_ENET0_IOADDR	0x80000000
 #define PCI_ENET0_MEMADDR	0x80000000
@@ -118,63 +118,63 @@
  * FLASH
  */
 
-#define CFG_FLASH_PRELIMBASE	0xFF800000
-#define CFG_FLASH_BASE		(0-flash_info[0].size)
+#define CONFIG_SYS_FLASH_PRELIMBASE	0xFF800000
+#define CONFIG_SYS_FLASH_BASE		(0-flash_info[0].size)
 
-#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
-#define CFG_MAX_FLASH_SECT	32	/* max number of sectors on one chip	*/
+#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
+#define CONFIG_SYS_MAX_FLASH_SECT	32	/* max number of sectors on one chip	*/
 
-#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
-#define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
+#define CONFIG_SYS_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
+#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
 
 /*-----------------------------------------------------------------------
  * RAM
  */
 
-#define CFG_SDRAM_BASE		0x00000000
-#define CFG_MAX_RAM_SIZE	0x10000000
+#define CONFIG_SYS_SDRAM_BASE		0x00000000
+#define CONFIG_SYS_MAX_RAM_SIZE	0x10000000
 
-#define CFG_RESET_ADDRESS	0xFFF00100
+#define CONFIG_SYS_RESET_ADDRESS	0xFFF00100
 
-#define CFG_MONITOR_BASE	TEXT_BASE
-#define CFG_MONITOR_LEN		0x00030000
+#define CONFIG_SYS_MONITOR_BASE	TEXT_BASE
+#define CONFIG_SYS_MONITOR_LEN		0x00030000
 
-#if (CFG_MONITOR_BASE < CFG_FLASH_PRELIMBASE)
-# define CFG_RAMBOOT		1
+#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_PRELIMBASE)
+# define CONFIG_SYS_RAMBOOT		1
 #else
-# undef CFG_RAMBOOT
+# undef CONFIG_SYS_RAMBOOT
 #endif
 
-#define CFG_INIT_RAM_ADDR	0x40000000
-#define CFG_INIT_RAM_END	0x1000
+#define CONFIG_SYS_INIT_RAM_ADDR	0x40000000
+#define CONFIG_SYS_INIT_RAM_END	0x1000
 
-#define CFG_GBL_DATA_SIZE	128
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_GBL_DATA_SIZE	128
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
-#define CFG_MALLOC_LEN		(512 << 10)	/* Reserve 512 kB for malloc()	*/
+#define CONFIG_SYS_MALLOC_LEN		(512 << 10)	/* Reserve 512 kB for malloc()	*/
 
-#define CFG_MEMTEST_START	0x00000000	/* memtest works on		*/
-#define CFG_MEMTEST_END		0x04000000	/* 0 ... 32 MB in DRAM		*/
+#define CONFIG_SYS_MEMTEST_START	0x00000000	/* memtest works on		*/
+#define CONFIG_SYS_MEMTEST_END		0x04000000	/* 0 ... 32 MB in DRAM		*/
 
 /*-----------------------------------------------------------------------
  * Memory mapping
  */
 
-#define CFG_CPLD_BASE		0xff000000	/* CPLD registers */
-#define CFG_CPLD_WATCHDOG	(CFG_CPLD_BASE)			/* Watchdog */
-#define CFG_CPLD_RESET		(CFG_CPLD_BASE + 0x040000)	/* Minor resets */
-#define CFG_UART_BASE		(CFG_CPLD_BASE + 0x700000)	/* debug UART */
+#define CONFIG_SYS_CPLD_BASE		0xff000000	/* CPLD registers */
+#define CONFIG_SYS_CPLD_WATCHDOG	(CONFIG_SYS_CPLD_BASE)			/* Watchdog */
+#define CONFIG_SYS_CPLD_RESET		(CONFIG_SYS_CPLD_BASE + 0x040000)	/* Minor resets */
+#define CONFIG_SYS_UART_BASE		(CONFIG_SYS_CPLD_BASE + 0x700000)	/* debug UART */
 
 /*-----------------------------------------------------------------------
  * NS16550 Configuration
  */
 
-#define CFG_NS16550
-#define CFG_NS16550_SERIAL
-#define CFG_NS16550_REG_SIZE	-4
-#define CFG_NS16550_CLK		1843200
-#define CFG_NS16550_COM1	CFG_UART_BASE
+#define CONFIG_SYS_NS16550
+#define CONFIG_SYS_NS16550_SERIAL
+#define CONFIG_SYS_NS16550_REG_SIZE	-4
+#define CONFIG_SYS_NS16550_CLK		1843200
+#define CONFIG_SYS_NS16550_COM1	CONFIG_SYS_UART_BASE
 
 /*-----------------------------------------------------------------------
  * I2C Bus
@@ -182,21 +182,21 @@
 
 #define CONFIG_I2C		1		/* I2C support on ... */
 #define CONFIG_HARD_I2C		1		/* ... hardware one */
-#define CFG_I2C_SPEED		400000		/* I2C speed and slave address	*/
-#define CFG_I2C_SLAVE		0x7F		/* I2C slave address */
+#define CONFIG_SYS_I2C_SPEED		400000		/* I2C speed and slave address	*/
+#define CONFIG_SYS_I2C_SLAVE		0x7F		/* I2C slave address */
 
-#define CFG_I2C_EXPANDER0_ADDR	0x20		/* PCF8574 expander 0 addrerr */
-#define CFG_I2C_EXPANDER1_ADDR	0x21		/* PCF8574 expander 1 addrerr */
-#define CFG_I2C_EXPANDER2_ADDR	0x26		/* PCF8574 expander 2 addrerr */
+#define CONFIG_SYS_I2C_EXPANDER0_ADDR	0x20		/* PCF8574 expander 0 addrerr */
+#define CONFIG_SYS_I2C_EXPANDER1_ADDR	0x21		/* PCF8574 expander 1 addrerr */
+#define CONFIG_SYS_I2C_EXPANDER2_ADDR	0x26		/* PCF8574 expander 2 addrerr */
 
 /*-----------------------------------------------------------------------
  * Environment
  */
 
-#define CFG_ENV_IS_IN_FLASH	1
-#define CFG_ENV_ADDR		0xFFF30000	/* Offset of Environment Sector	*/
-#define CFG_ENV_SIZE		0x00010000	/* Total Size of Environment Sector */
-#define	CFG_ENV_IS_EMBEDDED	1		/* short-cut compile-time test	*/
+#define CONFIG_ENV_IS_IN_FLASH	1
+#define CONFIG_ENV_ADDR		0xFFF30000	/* Offset of Environment Sector	*/
+#define CONFIG_ENV_SIZE		0x00010000	/* Total Size of Environment Sector */
+#define	CONFIG_ENV_IS_EMBEDDED	1		/* short-cut compile-time test	*/
 #define CONFIG_ENV_OVERWRITE    1		/* Allow modifying the environment */
 
 /*
@@ -208,30 +208,30 @@
 #define CONFIG_SYS_CLK_FREQ  33000000	/* external frequency to pll */
 #define CONFIG_PLL_PCI_TO_MEM_MULTIPLIER  2
 
-#define CFG_EUMB_ADDR		0xFC000000
+#define CONFIG_SYS_EUMB_ADDR		0xFC000000
 
 /* MCCR1 */
-#define CFG_ROMNAL		0	/* rom/flash next access time		*/
-#define CFG_ROMFAL		19	/* rom/flash access time		*/
+#define CONFIG_SYS_ROMNAL		0	/* rom/flash next access time		*/
+#define CONFIG_SYS_ROMFAL		19	/* rom/flash access time		*/
 
 /* MCCR2 */
-#define CFG_ASRISE		15	/* ASRISE=15 clocks			*/
-#define CFG_ASFALL		3	/* ASFALL=3 clocks			*/
-#define CFG_REFINT		1000	/* REFINT=1000 clocks			*/
+#define CONFIG_SYS_ASRISE		15	/* ASRISE=15 clocks			*/
+#define CONFIG_SYS_ASFALL		3	/* ASFALL=3 clocks			*/
+#define CONFIG_SYS_REFINT		1000	/* REFINT=1000 clocks			*/
 
 /* MCCR3 */
-#define CFG_BSTOPRE		0x35c	/* Burst To Precharge			*/
-#define CFG_REFREC		7	/* Refresh to activate interval		*/
-#define CFG_RDLAT		4	/* data latency from read command	*/
+#define CONFIG_SYS_BSTOPRE		0x35c	/* Burst To Precharge			*/
+#define CONFIG_SYS_REFREC		7	/* Refresh to activate interval		*/
+#define CONFIG_SYS_RDLAT		4	/* data latency from read command	*/
 
 /* MCCR4 */
-#define CFG_PRETOACT		2	/* Precharge to activate interval	*/
-#define CFG_ACTTOPRE		5	/* Activate to Precharge interval	*/
-#define CFG_ACTORW		2	/* Activate to R/W			*/
-#define CFG_SDMODE_CAS_LAT	3	/* SDMODE CAS latency			*/
-#define CFG_SDMODE_WRAP		0	/* SDMODE wrap type			*/
-#define CFG_SDMODE_BURSTLEN	3	/* SDMODE Burst length 2=4, 3=8		*/
-#define CFG_REGISTERD_TYPE_BUFFER   1
+#define CONFIG_SYS_PRETOACT		2	/* Precharge to activate interval	*/
+#define CONFIG_SYS_ACTTOPRE		5	/* Activate to Precharge interval	*/
+#define CONFIG_SYS_ACTORW		2	/* Activate to R/W			*/
+#define CONFIG_SYS_SDMODE_CAS_LAT	3	/* SDMODE CAS latency			*/
+#define CONFIG_SYS_SDMODE_WRAP		0	/* SDMODE wrap type			*/
+#define CONFIG_SYS_SDMODE_BURSTLEN	3	/* SDMODE Burst length 2=4, 3=8		*/
+#define CONFIG_SYS_REGISTERD_TYPE_BUFFER   1
 
 /* memory bank settings*/
 /*
@@ -240,80 +240,80 @@
  * bits will be set to 0x00000 for a start address, or 0xfffff for an
  * end address
  */
-#define CFG_BANK0_START		0x00000000
-#define CFG_BANK0_END		(CFG_MAX_RAM_SIZE - 1)
-#define CFG_BANK0_ENABLE	1
-#define CFG_BANK1_START		0x00000000
-#define CFG_BANK1_END		0x00000000
-#define CFG_BANK1_ENABLE	0
-#define CFG_BANK2_START		0x00000000
-#define CFG_BANK2_END		0x00000000
-#define CFG_BANK2_ENABLE	0
-#define CFG_BANK3_START		0x00000000
-#define CFG_BANK3_END		0x00000000
-#define CFG_BANK3_ENABLE	0
-#define CFG_BANK4_START		0x00000000
-#define CFG_BANK4_END		0x00000000
-#define CFG_BANK4_ENABLE	0
-#define CFG_BANK5_START		0x00000000
-#define CFG_BANK5_END		0x00000000
-#define CFG_BANK5_ENABLE	0
-#define CFG_BANK6_START		0x00000000
-#define CFG_BANK6_END		0x00000000
-#define CFG_BANK6_ENABLE	0
-#define CFG_BANK7_START		0x00000000
-#define CFG_BANK7_END		0x00000000
-#define CFG_BANK7_ENABLE	0
+#define CONFIG_SYS_BANK0_START		0x00000000
+#define CONFIG_SYS_BANK0_END		(CONFIG_SYS_MAX_RAM_SIZE - 1)
+#define CONFIG_SYS_BANK0_ENABLE	1
+#define CONFIG_SYS_BANK1_START		0x00000000
+#define CONFIG_SYS_BANK1_END		0x00000000
+#define CONFIG_SYS_BANK1_ENABLE	0
+#define CONFIG_SYS_BANK2_START		0x00000000
+#define CONFIG_SYS_BANK2_END		0x00000000
+#define CONFIG_SYS_BANK2_ENABLE	0
+#define CONFIG_SYS_BANK3_START		0x00000000
+#define CONFIG_SYS_BANK3_END		0x00000000
+#define CONFIG_SYS_BANK3_ENABLE	0
+#define CONFIG_SYS_BANK4_START		0x00000000
+#define CONFIG_SYS_BANK4_END		0x00000000
+#define CONFIG_SYS_BANK4_ENABLE	0
+#define CONFIG_SYS_BANK5_START		0x00000000
+#define CONFIG_SYS_BANK5_END		0x00000000
+#define CONFIG_SYS_BANK5_ENABLE	0
+#define CONFIG_SYS_BANK6_START		0x00000000
+#define CONFIG_SYS_BANK6_END		0x00000000
+#define CONFIG_SYS_BANK6_ENABLE	0
+#define CONFIG_SYS_BANK7_START		0x00000000
+#define CONFIG_SYS_BANK7_END		0x00000000
+#define CONFIG_SYS_BANK7_ENABLE	0
 /*
  * Memory bank enable bitmask, specifying which of the banks defined above
  are actually present. MSB is for bank #7, LSB is for bank #0.
  */
-#define CFG_BANK_ENABLE		0x01
+#define CONFIG_SYS_BANK_ENABLE		0x01
 
-#define CFG_ODCR		0xff	/* configures line driver impedances,	*/
+#define CONFIG_SYS_ODCR		0xff	/* configures line driver impedances,	*/
 					/* see 8240 book for bit definitions	*/
-#define CFG_PGMAX		0x32	/* how long the 8240 retains the	*/
+#define CONFIG_SYS_PGMAX		0x32	/* how long the 8240 retains the	*/
 					/* currently accessed page in memory	*/
 					/* see 8240 book for details		*/
 
 /* SDRAM 0 - 256MB */
-#define CFG_IBAT0L	(CFG_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
-#define CFG_IBAT0U	(CFG_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CONFIG_SYS_IBAT0L	(CONFIG_SYS_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
+#define CONFIG_SYS_IBAT0U	(CONFIG_SYS_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
 
 /* stack in DCACHE @ 1GB (no backing mem) */
-#define CFG_IBAT1L	(CFG_INIT_RAM_ADDR | BATL_PP_10 | BATL_MEMCOHERENCE)
-#define CFG_IBAT1U	(CFG_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP)
+#define CONFIG_SYS_IBAT1L	(CONFIG_SYS_INIT_RAM_ADDR | BATL_PP_10 | BATL_MEMCOHERENCE)
+#define CONFIG_SYS_IBAT1U	(CONFIG_SYS_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP)
 
 /* PCI memory */
-#define CFG_IBAT2L	(0x80000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
-#define CFG_IBAT2U	(0x80000000 | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CONFIG_SYS_IBAT2L	(0x80000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
+#define CONFIG_SYS_IBAT2U	(0x80000000 | BATU_BL_256M | BATU_VS | BATU_VP)
 
 /* Flash, config addrs, etc */
-#define CFG_IBAT3L	(0xF0000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
-#define CFG_IBAT3U	(0xF0000000 | BATU_BL_256M | BATU_VS | BATU_VP)
-
-#define CFG_DBAT0L	CFG_IBAT0L
-#define CFG_DBAT0U	CFG_IBAT0U
-#define CFG_DBAT1L	CFG_IBAT1L
-#define CFG_DBAT1U	CFG_IBAT1U
-#define CFG_DBAT2L	CFG_IBAT2L
-#define CFG_DBAT2U	CFG_IBAT2U
-#define CFG_DBAT3L	CFG_IBAT3L
-#define CFG_DBAT3U	CFG_IBAT3U
+#define CONFIG_SYS_IBAT3L	(0xF0000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
+#define CONFIG_SYS_IBAT3U	(0xF0000000 | BATU_BL_256M | BATU_VS | BATU_VP)
+
+#define CONFIG_SYS_DBAT0L	CONFIG_SYS_IBAT0L
+#define CONFIG_SYS_DBAT0U	CONFIG_SYS_IBAT0U
+#define CONFIG_SYS_DBAT1L	CONFIG_SYS_IBAT1L
+#define CONFIG_SYS_DBAT1U	CONFIG_SYS_IBAT1U
+#define CONFIG_SYS_DBAT2L	CONFIG_SYS_IBAT2L
+#define CONFIG_SYS_DBAT2U	CONFIG_SYS_IBAT2U
+#define CONFIG_SYS_DBAT3L	CONFIG_SYS_IBAT3L
+#define CONFIG_SYS_DBAT3U	CONFIG_SYS_IBAT3U
 
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
+#define CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
 
 /*-----------------------------------------------------------------------
  * Cache Configuration
  */
-#define CFG_CACHELINE_SIZE	32	/* For MPC8240 CPU			*/
+#define CONFIG_SYS_CACHELINE_SIZE	32	/* For MPC8240 CPU			*/
 #if defined(CONFIG_CMD_KGDB)
-#  define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value */
+#  define CONFIG_SYS_CACHELINE_SHIFT	5	/* log base 2 of the above value */
 #endif
 
 /*
diff --git a/include/configs/P3G4.h b/include/configs/P3G4.h
index 5a2d15770..971338a46 100644
--- a/include/configs/P3G4.h
+++ b/include/configs/P3G4.h
@@ -40,7 +40,7 @@
  */
 
 #define CONFIG_P3G4		1	/* this is a P3G4  board	*/
-#define CFG_GT_6426x        GT_64260 /* with a 64260 system controller */
+#define CONFIG_SYS_GT_6426x        GT_64260 /* with a 64260 system controller */
 
 #define CONFIG_BAUDRATE		115200	/* console baudrate = 115200	*/
 
@@ -51,10 +51,10 @@
 #define CONFIG_MISC_INIT_R	1
 #define CONFIG_BOARD_EARLY_INIT_F 1
 
-#define CFG_BOARD_NAME		"P3G4"
+#define CONFIG_SYS_BOARD_NAME		"P3G4"
 
-#undef CFG_HUSH_PARSER
-#define CFG_PROMPT_HUSH_PS2	"> "
+#undef CONFIG_SYS_HUSH_PARSER
+#define CONFIG_SYS_PROMPT_HUSH_PS2	"> "
 
 /*
  * The following defines let you select what serial you want to use
@@ -115,7 +115,7 @@
 #define CONFIG_BOOTCOMMAND	"run flash_self"
 
 #define CONFIG_LOADS_ECHO	0	/* echo off for serial download	*/
-#define	CFG_LOADS_BAUD_CHANGE		/* allow baudrate changes	*/
+#define	CONFIG_SYS_LOADS_BAUD_CHANGE		/* allow baudrate changes	*/
 
 #undef	CONFIG_WATCHDOG			/* watchdog disabled		*/
 #undef	CONFIG_ALTIVEC                  /* undef to disable             */
@@ -151,27 +151,27 @@
 /*
  * Miscellaneous configurable options
  */
-#define	CFG_LONGHELP			/* undef to save memory		*/
-#define	CFG_PROMPT	"=> "		/* Monitor Command Prompt	*/
+#define	CONFIG_SYS_LONGHELP			/* undef to save memory		*/
+#define	CONFIG_SYS_PROMPT	"=> "		/* Monitor Command Prompt	*/
 #if defined(CONFIG_CMD_KGDB)
-#define	CFG_CBSIZE	1024		/* Console I/O Buffer Size	*/
+#define	CONFIG_SYS_CBSIZE	1024		/* Console I/O Buffer Size	*/
 #else
-#define	CFG_CBSIZE	256		/* Console I/O Buffer Size	*/
+#define	CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size	*/
 #endif
-#define	CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define	CFG_MAXARGS	16		/* max number of command args	*/
-#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+#define	CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define	CONFIG_SYS_MAXARGS	16		/* max number of command args	*/
+#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
 
-#define CFG_MEMTEST_START	0x00400000	/* memtest works on	*/
-#define CFG_MEMTEST_END		0x00C00000	/* 4 ... 12 MB in DRAM	*/
+#define CONFIG_SYS_MEMTEST_START	0x00400000	/* memtest works on	*/
+#define CONFIG_SYS_MEMTEST_END		0x00C00000	/* 4 ... 12 MB in DRAM	*/
 
-#define	CFG_LOAD_ADDR		0x00300000	/* default load address	*/
+#define	CONFIG_SYS_LOAD_ADDR		0x00300000	/* default load address	*/
 
-#define	CFG_HZ			1000		/* decr freq: 1ms ticks	*/
-#define CFG_BUS_HZ		133000000	/* 133 MHz		*/
-#define CFG_BUS_CLK		CFG_BUS_HZ
+#define	CONFIG_SYS_HZ			1000		/* decr freq: 1ms ticks	*/
+#define CONFIG_SYS_BUS_HZ		133000000	/* 133 MHz		*/
+#define CONFIG_SYS_BUS_CLK		CONFIG_SYS_BUS_HZ
 
-#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
 
 
 /*
@@ -183,63 +183,63 @@
 /*-----------------------------------------------------------------------
  * Definitions for initial stack pointer and data area
  */
-#define CFG_INIT_RAM_ADDR	0x40000000
-#define	CFG_INIT_RAM_END	0x1000
-#define	CFG_GBL_DATA_SIZE	128  /* size in bytes reserved for init data */
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_RAM_LOCK
+#define CONFIG_SYS_INIT_RAM_ADDR	0x40000000
+#define	CONFIG_SYS_INIT_RAM_END	0x1000
+#define	CONFIG_SYS_GBL_DATA_SIZE	128  /* size in bytes reserved for init data */
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_RAM_LOCK
 
 
 /*-----------------------------------------------------------------------
  * Start addresses for the final memory configuration
  * (Set up by the startup code)
- * Please note that CFG_SDRAM_BASE _must_ start at 0
+ * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
  */
-#define	CFG_SDRAM_BASE		0x00000000
-#define CFG_FLASH_BASE		0xff000000
-#define CFG_RESET_ADDRESS	0xfff00100
-#define	CFG_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor */
-#define CFG_MONITOR_BASE	TEXT_BASE
-#define	CFG_MALLOC_LEN		(256 << 10)	/* Reserve 256 kB for malloc */
+#define	CONFIG_SYS_SDRAM_BASE		0x00000000
+#define CONFIG_SYS_FLASH_BASE		0xff000000
+#define CONFIG_SYS_RESET_ADDRESS	0xfff00100
+#define	CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor */
+#define CONFIG_SYS_MONITOR_BASE	TEXT_BASE
+#define	CONFIG_SYS_MALLOC_LEN		(256 << 10)	/* Reserve 256 kB for malloc */
 
 /* areas to map different things with the GT in physical space */
-#define CFG_DRAM_BANKS		1
-#define CFG_DFL_GT_REGS		0x14000000	/* boot time GT_REGS */
+#define CONFIG_SYS_DRAM_BANKS		1
+#define CONFIG_SYS_DFL_GT_REGS		0x14000000	/* boot time GT_REGS */
 
 /* What to put in the bats. */
-#define CFG_MISC_REGION_BASE	0xf0000000
+#define CONFIG_SYS_MISC_REGION_BASE	0xf0000000
 
 /* Peripheral Device section */
-#define CFG_GT_REGS		0xf8000000
-#define CFG_DEV_BASE		0xff000000
+#define CONFIG_SYS_GT_REGS		0xf8000000
+#define CONFIG_SYS_DEV_BASE		0xff000000
 
-#define CFG_DEV0_SPACE		CFG_DEV_BASE
-#define CFG_DEV1_SPACE		(CFG_DEV0_SPACE + CFG_DEV0_SIZE)
-#define CFG_DEV2_SPACE		(CFG_DEV1_SPACE + CFG_DEV1_SIZE)
-#define CFG_DEV3_SPACE		(CFG_DEV2_SPACE + CFG_DEV2_SIZE)
+#define CONFIG_SYS_DEV0_SPACE		CONFIG_SYS_DEV_BASE
+#define CONFIG_SYS_DEV1_SPACE		(CONFIG_SYS_DEV0_SPACE + CONFIG_SYS_DEV0_SIZE)
+#define CONFIG_SYS_DEV2_SPACE		(CONFIG_SYS_DEV1_SPACE + CONFIG_SYS_DEV1_SIZE)
+#define CONFIG_SYS_DEV3_SPACE		(CONFIG_SYS_DEV2_SPACE + CONFIG_SYS_DEV2_SIZE)
 
-#define CFG_DEV0_SIZE		 _8M /* Flash bank */
-#define CFG_DEV1_SIZE		 0   /* unused */
-#define CFG_DEV2_SIZE		 0   /* unused */
-#define CFG_DEV3_SIZE		 0   /* unused */
+#define CONFIG_SYS_DEV0_SIZE		 _8M /* Flash bank */
+#define CONFIG_SYS_DEV1_SIZE		 0   /* unused */
+#define CONFIG_SYS_DEV2_SIZE		 0   /* unused */
+#define CONFIG_SYS_DEV3_SIZE		 0   /* unused */
 
-#define CFG_16BIT_BOOT_PAR	0xc01b5e7c
-#define CFG_DEV0_PAR		CFG_16BIT_BOOT_PAR
+#define CONFIG_SYS_16BIT_BOOT_PAR	0xc01b5e7c
+#define CONFIG_SYS_DEV0_PAR		CONFIG_SYS_16BIT_BOOT_PAR
 
 #if 0 /* Wrong?? NTL */
-#define CFG_MPP_CONTROL_0	0x53541717	/* InitAct EOT[4] DBurst TCEn[1] */
+#define CONFIG_SYS_MPP_CONTROL_0	0x53541717	/* InitAct EOT[4] DBurst TCEn[1] */
 						/* DMAAck[1:0] GNT0[1:0] */
 #else
-#define CFG_MPP_CONTROL_0	0x53547777	/* InitAct EOT[4] DBurst TCEn[1] */
+#define CONFIG_SYS_MPP_CONTROL_0	0x53547777	/* InitAct EOT[4] DBurst TCEn[1] */
 						/* REQ0[1:0] GNT0[1:0] */
 #endif
-#define CFG_MPP_CONTROL_1	0x44009911	/* TCEn[4] TCTcnt[4] GPP[13:12] */
+#define CONFIG_SYS_MPP_CONTROL_1	0x44009911	/* TCEn[4] TCTcnt[4] GPP[13:12] */
 						/* DMAReq[4] DMAAck[4] WDNMI WDE */
 #if 0 /* Wrong?? NTL */
-#define CFG_MPP_CONTROL_2	0x40091818	/* TCTcnt[0] GPP[22:21] BClkIn */
+#define CONFIG_SYS_MPP_CONTROL_2	0x40091818	/* TCTcnt[0] GPP[22:21] BClkIn */
 						/* DMAAck[1:0] GNT1[1:0] */
 #else
-#define CFG_MPP_CONTROL_2	0x40098888	/* TCTcnt[0] */
+#define CONFIG_SYS_MPP_CONTROL_2	0x40098888	/* TCTcnt[0] */
 						/* GPP[22] (RS232IntB or PCI1Int) */
 						/* GPP[21] (RS323IntA) */
 						/* BClkIn */
@@ -247,10 +247,10 @@
 #endif
 
 #if 0 /* Wrong?? NTL */
-# define CFG_MPP_CONTROL_3	0x00090066	/* GPP[31:29] BClkOut0 */
+# define CONFIG_SYS_MPP_CONTROL_3	0x00090066	/* GPP[31:29] BClkOut0 */
 						/* GPP[27:26] Int[1:0] */
 #else
-# define CFG_MPP_CONTROL_3	0x22090066      /* MREQ MGNT */
+# define CONFIG_SYS_MPP_CONTROL_3	0x22090066      /* MREQ MGNT */
 						/* GPP[29]    (PCI1Int) */
 						/* BClkOut0 */
 						/* GPP[27]    (PCI0Int) */
@@ -258,17 +258,17 @@
 						/* CPUInt[25:24] */
 #endif
 
-#define CFG_SERIAL_PORT_MUX	0x00001102	/* 11=MPSC1/MPSC0 02=ETH 0 and 2 RMII */
+#define CONFIG_SYS_SERIAL_PORT_MUX	0x00001102	/* 11=MPSC1/MPSC0 02=ETH 0 and 2 RMII */
 
 #if 0 /* Wrong?? - NTL */
-# define CFG_GPP_LEVEL_CONTROL	0x000002c6
+# define CONFIG_SYS_GPP_LEVEL_CONTROL	0x000002c6
 #else
-# define CFG_GPP_LEVEL_CONTROL	0x2c600000	/* 0010 1100 0110 0000 */
+# define CONFIG_SYS_GPP_LEVEL_CONTROL	0x2c600000	/* 0010 1100 0110 0000 */
 						/* gpp[29] */
 						/* gpp[27:26] */
 						/* gpp[22:21] */
 
-# define CFG_SDRAM_CONFIG	0xd8e18200	/* 0x448 */
+# define CONFIG_SYS_SDRAM_CONFIG	0xd8e18200	/* 0x448 */
 				/* idmas use buffer 1,1
 				   comm use buffer 0
 				   pci use buffer 1,1
@@ -286,13 +286,13 @@
 #endif
 
 #if 0
-#define CFG_DUART_IO		CFG_DEV2_SPACE
-#define CFG_DUART_CHAN		1		/* channel to use for console */
+#define CONFIG_SYS_DUART_IO		CONFIG_SYS_DEV2_SPACE
+#define CONFIG_SYS_DUART_CHAN		1		/* channel to use for console */
 #endif
-#undef CFG_INIT_CHAN1
-#undef CFG_INIT_CHAN2
+#undef CONFIG_SYS_INIT_CHAN1
+#undef CONFIG_SYS_INIT_CHAN2
 #if 0
-#define SRAM_BASE		CFG_DEV0_SPACE
+#define SRAM_BASE		CONFIG_SYS_DEV0_SPACE
 #define SRAM_SIZE		0x00100000		/* 1 MB of sram */
 #endif
 
@@ -311,24 +311,24 @@
 #define CONFIG_PCI_PNP                  /* do pci plug-and-play         */
 
 /* PCI MEMORY MAP section */
-#define CFG_PCI0_MEM_BASE	0x80000000
-#define CFG_PCI0_MEM_SIZE	_128M
-#define CFG_PCI0_0_MEM_SPACE	(CFG_PCI0_MEM_BASE)
+#define CONFIG_SYS_PCI0_MEM_BASE	0x80000000
+#define CONFIG_SYS_PCI0_MEM_SIZE	_128M
+#define CONFIG_SYS_PCI0_0_MEM_SPACE	(CONFIG_SYS_PCI0_MEM_BASE)
 
-#define CFG_PCI1_MEM_BASE	0x88000000
-#define CFG_PCI1_MEM_SIZE	_128M
-#define CFG_PCI1_0_MEM_SPACE	(CFG_PCI1_MEM_BASE)
+#define CONFIG_SYS_PCI1_MEM_BASE	0x88000000
+#define CONFIG_SYS_PCI1_MEM_SIZE	_128M
+#define CONFIG_SYS_PCI1_0_MEM_SPACE	(CONFIG_SYS_PCI1_MEM_BASE)
 
 /* PCI I/O MAP section */
-#define CFG_PCI0_IO_BASE	0xfa000000
-#define CFG_PCI0_IO_SIZE	_16M
-#define CFG_PCI0_IO_SPACE	(CFG_PCI0_IO_BASE)
-#define CFG_PCI0_IO_SPACE_PCI	0x00000000
+#define CONFIG_SYS_PCI0_IO_BASE	0xfa000000
+#define CONFIG_SYS_PCI0_IO_SIZE	_16M
+#define CONFIG_SYS_PCI0_IO_SPACE	(CONFIG_SYS_PCI0_IO_BASE)
+#define CONFIG_SYS_PCI0_IO_SPACE_PCI	0x00000000
 
-#define CFG_PCI1_IO_BASE	0xfb000000
-#define CFG_PCI1_IO_SIZE	_16M
-#define CFG_PCI1_IO_SPACE	(CFG_PCI1_IO_BASE)
-#define CFG_PCI1_IO_SPACE_PCI	0x00000000
+#define CONFIG_SYS_PCI1_IO_BASE	0xfb000000
+#define CONFIG_SYS_PCI1_IO_SIZE	_16M
+#define CONFIG_SYS_PCI1_IO_SPACE	(CONFIG_SYS_PCI1_IO_BASE)
+#define CONFIG_SYS_PCI1_IO_SPACE_PCI	0x00000000
 
 /*----------------------------------------------------------------------
  * Initial BAT mappings
@@ -340,32 +340,32 @@
  */
 
 /* SDRAM */
-#define CFG_IBAT0L (CFG_SDRAM_BASE | BATL_PP_RW | BATL_CACHEINHIBIT)
-#define CFG_IBAT0U (CFG_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
-#define CFG_DBAT0L (CFG_SDRAM_BASE | BATL_PP_RW | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
-#define CFG_DBAT0U CFG_IBAT0U
+#define CONFIG_SYS_IBAT0L (CONFIG_SYS_SDRAM_BASE | BATL_PP_RW | BATL_CACHEINHIBIT)
+#define CONFIG_SYS_IBAT0U (CONFIG_SYS_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CONFIG_SYS_DBAT0L (CONFIG_SYS_SDRAM_BASE | BATL_PP_RW | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
+#define CONFIG_SYS_DBAT0U CONFIG_SYS_IBAT0U
 
 /* init ram */
-#define CFG_IBAT1L  (CFG_INIT_RAM_ADDR | BATL_PP_RW | BATL_MEMCOHERENCE)
-#define CFG_IBAT1U  (CFG_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP)
-#define CFG_DBAT1L  CFG_IBAT1L
-#define CFG_DBAT1U  CFG_IBAT1U
+#define CONFIG_SYS_IBAT1L  (CONFIG_SYS_INIT_RAM_ADDR | BATL_PP_RW | BATL_MEMCOHERENCE)
+#define CONFIG_SYS_IBAT1U  (CONFIG_SYS_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP)
+#define CONFIG_SYS_DBAT1L  CONFIG_SYS_IBAT1L
+#define CONFIG_SYS_DBAT1U  CONFIG_SYS_IBAT1U
 
 /* PCI0, PCI1 in one BAT */
-#define CFG_IBAT2L BATL_NO_ACCESS
-#define CFG_IBAT2U CFG_DBAT2U
-#define CFG_DBAT2L (CFG_PCI0_MEM_BASE | BATL_CACHEINHIBIT | BATL_PP_RW | BATL_GUARDEDSTORAGE)
-#define CFG_DBAT2U (CFG_PCI0_MEM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CONFIG_SYS_IBAT2L BATL_NO_ACCESS
+#define CONFIG_SYS_IBAT2U CONFIG_SYS_DBAT2U
+#define CONFIG_SYS_DBAT2L (CONFIG_SYS_PCI0_MEM_BASE | BATL_CACHEINHIBIT | BATL_PP_RW | BATL_GUARDEDSTORAGE)
+#define CONFIG_SYS_DBAT2U (CONFIG_SYS_PCI0_MEM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
 
 /* GT regs, bootrom, all the devices, PCI I/O */
-#define CFG_IBAT3L (CFG_MISC_REGION_BASE | BATL_CACHEINHIBIT | BATL_PP_RW)
-#define CFG_IBAT3U (CFG_MISC_REGION_BASE | BATU_VS | BATU_VP | BATU_BL_256M)
-#define CFG_DBAT3L (CFG_MISC_REGION_BASE | BATL_CACHEINHIBIT | BATL_PP_RW | BATL_GUARDEDSTORAGE)
-#define CFG_DBAT3U CFG_IBAT3U
+#define CONFIG_SYS_IBAT3L (CONFIG_SYS_MISC_REGION_BASE | BATL_CACHEINHIBIT | BATL_PP_RW)
+#define CONFIG_SYS_IBAT3U (CONFIG_SYS_MISC_REGION_BASE | BATU_VS | BATU_VP | BATU_BL_256M)
+#define CONFIG_SYS_DBAT3L (CONFIG_SYS_MISC_REGION_BASE | BATL_CACHEINHIBIT | BATL_PP_RW | BATL_GUARDEDSTORAGE)
+#define CONFIG_SYS_DBAT3U CONFIG_SYS_IBAT3U
 
 /* I2C speed and slave address (for compatability) defaults */
-#define CFG_I2C_SPEED	400000
-#define CFG_I2C_SLAVE	0x7F
+#define CONFIG_SYS_I2C_SPEED	400000
+#define CONFIG_SYS_I2C_SLAVE	0x7F
 
 /* I2C addresses for the two DIMM SPD chips */
 #ifndef CONFIG_EVB64260_750CX
@@ -381,33 +381,33 @@
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define	CFG_BOOTMAPSZ		(8<<20)	/* Initial Memory map for Linux */
+#define	CONFIG_SYS_BOOTMAPSZ		(8<<20)	/* Initial Memory map for Linux */
 
 /*-----------------------------------------------------------------------
  * FLASH organization
  */
-#define CFG_MAX_FLASH_BANKS	2	/* max number of memory banks	*/
-#define CFG_MAX_FLASH_SECT	67	/* max number of sectors on one chip */
+#define CONFIG_SYS_MAX_FLASH_BANKS	2	/* max number of memory banks	*/
+#define CONFIG_SYS_MAX_FLASH_SECT	67	/* max number of sectors on one chip */
 
-#define CFG_EXTRA_FLASH_DEVICE	BOOT_DEVICE
-#define CFG_EXTRA_FLASH_WIDTH	2	/* 16 bit */
-#define CFG_BOOT_FLASH_WIDTH	2	/* 16 bit */
+#define CONFIG_SYS_EXTRA_FLASH_DEVICE	BOOT_DEVICE
+#define CONFIG_SYS_EXTRA_FLASH_WIDTH	2	/* 16 bit */
+#define CONFIG_SYS_BOOT_FLASH_WIDTH	2	/* 16 bit */
 
-#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms) */
-#define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms) */
-#define CFG_FLASH_CFI		1
+#define CONFIG_SYS_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms) */
+#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms) */
+#define CONFIG_SYS_FLASH_CFI		1
 
-#define	CFG_ENV_IS_IN_FLASH	1
-#define	CFG_ENV_SIZE		0x1000	/* Total Size of Environment Sector */
-#define CFG_ENV_SECT_SIZE	0x20000
-#define CFG_ENV_ADDR		0xFFFE0000
+#define	CONFIG_ENV_IS_IN_FLASH	1
+#define	CONFIG_ENV_SIZE		0x1000	/* Total Size of Environment Sector */
+#define CONFIG_ENV_SECT_SIZE	0x20000
+#define CONFIG_ENV_ADDR		0xFFFE0000
 
 /*-----------------------------------------------------------------------
  * Cache Configuration
  */
-#define CFG_CACHELINE_SIZE	32	/* For all MPC74xx CPUs		 */
+#define CONFIG_SYS_CACHELINE_SIZE	32	/* For all MPC74xx CPUs		 */
 #if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value */
+#define CONFIG_SYS_CACHELINE_SHIFT	5	/* log base 2 of the above value */
 #endif
 
 /*-----------------------------------------------------------------------
@@ -415,7 +415,7 @@
  * look in include/74xx_7xx.h for the defines used here
  */
 
-#define CFG_L2
+#define CONFIG_SYS_L2
 
 #define L2_INIT		(L2CR_L2SIZ_2M | L2CR_L2CLK_3 | L2CR_L2RAM_BURST | \
 			 L2CR_L2OH_5 | L2CR_L2CTL | L2CR_L2WT)
@@ -430,7 +430,7 @@
 #define	BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH */
 #define BOOTFLAG_WARM	0x02		/* Software reboot		    */
 
-#define CFG_BOARD_ASM_INIT      1
+#define CONFIG_SYS_BOARD_ASM_INIT      1
 
 
 #endif	/* __CONFIG_H */
diff --git a/include/configs/PATI.h b/include/configs/PATI.h
index 4b37eca7c..9d80ce413 100644
--- a/include/configs/PATI.h
+++ b/include/configs/PATI.h
@@ -87,28 +87,28 @@
 /*
  * Miscellaneous configurable options
  */
-#define CFG_CONSOLE_IS_IN_ENV	/* stdin, stdout and stderr are in evironment */
+#define CONFIG_SYS_CONSOLE_IS_IN_ENV	/* stdin, stdout and stderr are in evironment */
 #define CONFIG_PREBOOT
 
-#define	CFG_LONGHELP				/* undef to save memory		*/
-#define	CFG_PROMPT		"pati=> "		/* Monitor Command Prompt	*/
+#define	CONFIG_SYS_LONGHELP				/* undef to save memory		*/
+#define	CONFIG_SYS_PROMPT		"pati=> "		/* Monitor Command Prompt	*/
 #if defined(CONFIG_CMD_KGDB)
-#define	CFG_CBSIZE		1024		/* Console I/O Buffer Size	*/
+#define	CONFIG_SYS_CBSIZE		1024		/* Console I/O Buffer Size	*/
 #else
-#define	CFG_CBSIZE		256		/* Console I/O Buffer Size	*/
+#define	CONFIG_SYS_CBSIZE		256		/* Console I/O Buffer Size	*/
 #endif
-#define	CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define	CFG_MAXARGS		16	       /* max number of command args	*/
-#define CFG_BARGSIZE		CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+#define	CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define	CONFIG_SYS_MAXARGS		16	       /* max number of command args	*/
+#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
 
-#define CFG_MEMTEST_START	0x00010000	/* memtest works on		*/
-#define CFG_MEMTEST_END		0x00A00000	/* 10 MB in SRAM			*/
+#define CONFIG_SYS_MEMTEST_START	0x00010000	/* memtest works on		*/
+#define CONFIG_SYS_MEMTEST_END		0x00A00000	/* 10 MB in SRAM			*/
 
-#define	CFG_LOAD_ADDR		0x100000	/* default load address		*/
+#define	CONFIG_SYS_LOAD_ADDR		0x100000	/* default load address		*/
 
-#define	CFG_HZ			1000		/* Decrementer freq: 1 ms ticks	*/
+#define	CONFIG_SYS_HZ			1000		/* Decrementer freq: 1 ms ticks	*/
 
-#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 1250000 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 1250000 }
 
 
 /***********************************************************************
@@ -123,41 +123,41 @@
 /*
  * Internal Memory Mapped (This is not the IMMR content)
  */
-#define CFG_IMMR		0x01C00000		/* Physical start adress of internal memory map */
+#define CONFIG_SYS_IMMR		0x01C00000		/* Physical start adress of internal memory map */
 
 /*
  * Definitions for initial stack pointer and data area
  */
-#define CFG_INIT_RAM_ADDR	(CFG_IMMR + 0x003f9800)	/* Physical start adress of internal MPC555 writable RAM */
-#define	CFG_INIT_RAM_END	(CFG_IMMR + 0x003fffff)	/* Physical end adress of internal MPC555 used RAM area	*/
-#define	CFG_GBL_DATA_SIZE	128			/* Size in bytes reserved for initial global data */
-#define CFG_GBL_DATA_OFFSET	((CFG_INIT_RAM_END - CFG_INIT_RAM_ADDR) - CFG_GBL_DATA_SIZE) /* Offset from the beginning of ram */
-#define	CFG_INIT_SP_ADDR	(CFG_IMMR + 0x03fa000)	/* Physical start adress of inital stack */
+#define CONFIG_SYS_INIT_RAM_ADDR	(CONFIG_SYS_IMMR + 0x003f9800)	/* Physical start adress of internal MPC555 writable RAM */
+#define	CONFIG_SYS_INIT_RAM_END	(CONFIG_SYS_IMMR + 0x003fffff)	/* Physical end adress of internal MPC555 used RAM area	*/
+#define	CONFIG_SYS_GBL_DATA_SIZE	128			/* Size in bytes reserved for initial global data */
+#define CONFIG_SYS_GBL_DATA_OFFSET	((CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_INIT_RAM_ADDR) - CONFIG_SYS_GBL_DATA_SIZE) /* Offset from the beginning of ram */
+#define	CONFIG_SYS_INIT_SP_ADDR	(CONFIG_SYS_IMMR + 0x03fa000)	/* Physical start adress of inital stack */
 /*
  * Start addresses for the final memory configuration
- * Please note that CFG_SDRAM_BASE _must_ start at 0
+ * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
  */
-#define	CFG_SDRAM_BASE		0x00000000	/* Monitor won't change memory map			*/
-#define CFG_FLASH_BASE		0xffC00000	/* External flash */
+#define	CONFIG_SYS_SDRAM_BASE		0x00000000	/* Monitor won't change memory map			*/
+#define CONFIG_SYS_FLASH_BASE		0xffC00000	/* External flash */
 #define PCI_BASE		0x03000000	/* PCI Base (CS2) */
 #define PCI_CONFIG_BASE		0x04000000	/* PCI & PLD  (CS3) */
 #define PLD_CONFIG_BASE		0x04001000	/* PLD  (CS3) */
 
-#define	CFG_MONITOR_BASE	0xFFF00000
-/* CFG_FLASH_BASE	*/ /* TEXT_BASE is defined in the board config.mk file.	*/
+#define	CONFIG_SYS_MONITOR_BASE	0xFFF00000
+/* CONFIG_SYS_FLASH_BASE	*/ /* TEXT_BASE is defined in the board config.mk file.	*/
 						/* This adress is given to the linker with -Ttext to	*/
 						/* locate the text section at this adress.		*/
-#define	CFG_MONITOR_LEN		(256 << 10)	/* Reserve 192 kB for Monitor				*/
-#define	CFG_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()				*/
+#define	CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 192 kB for Monitor				*/
+#define	CONFIG_SYS_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()				*/
 
-#define CFG_RESET_ADDRESS	(PLD_CONFIG_BASE + 0x10)	 /* Adress which causes reset */
+#define CONFIG_SYS_RESET_ADDRESS	(PLD_CONFIG_BASE + 0x10)	 /* Adress which causes reset */
 
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define	CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux		*/
+#define	CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux		*/
 
 
 /*-----------------------------------------------------------------------
@@ -166,29 +166,29 @@
  *
  */
 
-#define CFG_MAX_FLASH_BANKS		1		/* Max number of memory banks		*/
-#define CFG_MAX_FLASH_SECT		128		/* Max number of sectors on one chip	*/
-#define CFG_FLASH_ERASE_TOUT	180000		/* Timeout for Flash Erase (in ms)	*/
-#define CFG_FLASH_WRITE_TOUT	600		/* Timeout for Flash Write (in ms)	*/
+#define CONFIG_SYS_MAX_FLASH_BANKS		1		/* Max number of memory banks		*/
+#define CONFIG_SYS_MAX_FLASH_SECT		128		/* Max number of sectors on one chip	*/
+#define CONFIG_SYS_FLASH_ERASE_TOUT	180000		/* Timeout for Flash Erase (in ms)	*/
+#define CONFIG_SYS_FLASH_WRITE_TOUT	600		/* Timeout for Flash Write (in ms)	*/
 
 
-#define	CFG_ENV_IS_IN_EEPROM
-#ifdef	CFG_ENV_IS_IN_EEPROM
-#define CFG_ENV_OFFSET		0
-#define CFG_ENV_SIZE		2048
+#define	CONFIG_ENV_IS_IN_EEPROM
+#ifdef	CONFIG_ENV_IS_IN_EEPROM
+#define CONFIG_ENV_OFFSET		0
+#define CONFIG_ENV_SIZE		2048
 #endif
 
-#undef  CFG_ENV_IS_IN_FLASH
-#ifdef	CFG_ENV_IS_IN_FLASH
-#define	CFG_ENV_SIZE		0x00002000		/* Set whole sector as env		*/
-#define CFG_ENV_OFFSET		((0 - CFG_FLASH_BASE) - CFG_ENV_SIZE)		/* Environment starts at this adress	*/
+#undef  CONFIG_ENV_IS_IN_FLASH
+#ifdef	CONFIG_ENV_IS_IN_FLASH
+#define	CONFIG_ENV_SIZE		0x00002000		/* Set whole sector as env		*/
+#define CONFIG_ENV_OFFSET		((0 - CONFIG_SYS_FLASH_BASE) - CONFIG_ENV_SIZE)		/* Environment starts at this adress	*/
 #endif
 
 
 #define CONFIG_SPI		1
-#define CFG_SPI_CS_USED	0x09 /* CS0 and CS3 are used */
-#define CFG_SPI_CS_BASE	0x08 /* CS3 is active low */
-#define CFG_SPI_CS_ACT	0x00 /* CS3 is active low */
+#define CONFIG_SYS_SPI_CS_USED	0x09 /* CS0 and CS3 are used */
+#define CONFIG_SYS_SPI_CS_BASE	0x08 /* CS3 is active low */
+#define CONFIG_SYS_SPI_CS_ACT	0x00 /* CS3 is active low */
 /*-----------------------------------------------------------------------
  * SYPCR - System Protection Control
  * SYPCR can only be written once after reset!
@@ -197,10 +197,10 @@
  */
 #undef CONFIG_WATCHDOG
 #if defined(CONFIG_WATCHDOG)
-#define CFG_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
+#define CONFIG_SYS_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
 			 SYPCR_SWE | SYPCR_SWRI| SYPCR_SWP)
 #else
-#define CFG_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
+#define CONFIG_SYS_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
 			 SYPCR_SWP)
 #endif	/* CONFIG_WATCHDOG */
 
@@ -209,14 +209,14 @@
  *-----------------------------------------------------------------------
  * Clear Reference Interrupt Status, Timebase freezing enabled
  */
-#define CFG_TBSCR	(TBSCR_REFA | TBSCR_REFB | TBSCR_TBF)
+#define CONFIG_SYS_TBSCR	(TBSCR_REFA | TBSCR_REFB | TBSCR_TBF)
 
 /*-----------------------------------------------------------------------
  * PISCR - Periodic Interrupt Status and Control
  *-----------------------------------------------------------------------
  * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
  */
-#define CFG_PISCR	(PISCR_PS | PISCR_PITF)
+#define CONFIG_SYS_PISCR	(PISCR_PS | PISCR_PITF)
 
 /*-----------------------------------------------------------------------
  * SCCR - System Clock and reset Control Register
@@ -225,7 +225,7 @@
  * power management and some other internal clocks
  */
 #define SCCR_MASK	SCCR_EBDF00
-#define CFG_SCCR	(SCCR_TBS     | SCCR_RTDIV    | SCCR_RTSEL    | \
+#define CONFIG_SYS_SCCR	(SCCR_TBS     | SCCR_RTDIV    | SCCR_RTSEL    | \
 			 SCCR_COM01   | SCCR_DFNL000 | SCCR_DFNH000)
 
 /*-----------------------------------------------------------------------
@@ -233,7 +233,7 @@
  *-----------------------------------------------------------------------
  * Data show cycle
  */
-#define CFG_SIUMCR	(SIUMCR_DBGC00 | SIUMCR_EARB | SIUMCR_GPC01 | SIUMCR_MLRC11) /* Disable data show cycle	*/
+#define CONFIG_SYS_SIUMCR	(SIUMCR_DBGC00 | SIUMCR_EARB | SIUMCR_GPC01 | SIUMCR_MLRC11) /* Disable data show cycle	*/
 
 /*-----------------------------------------------------------------------
  * PLPRCR - PLL, Low-Power, and Reset Control Register
@@ -241,47 +241,47 @@
  * Set all bits to 40 Mhz
  *
  */
-#define CFG_OSC_CLK	((uint)4000000)		/* Oscillator clock is 4MHz	*/
+#define CONFIG_SYS_OSC_CLK	((uint)4000000)		/* Oscillator clock is 4MHz	*/
 
 
-#define CFG_PLPRCR	(PLPRCR_MF_9 | PLPRCR_DIVF_0)
+#define CONFIG_SYS_PLPRCR	(PLPRCR_MF_9 | PLPRCR_DIVF_0)
 
 /*-----------------------------------------------------------------------
  * UMCR - UIMB Module Configuration Register
  *-----------------------------------------------------------------------
  *
  */
-#define CFG_UMCR	(UMCR_FSPEED)		/* IMB clock same as U-bus	*/
+#define CONFIG_SYS_UMCR	(UMCR_FSPEED)		/* IMB clock same as U-bus	*/
 
 /*-----------------------------------------------------------------------
  * ICTRL - I-Bus Support Control Register
  */
-#define CFG_ICTRL	(ICTRL_ISCT_SER_7)	/* Take out of serialized mode	*/
+#define CONFIG_SYS_ICTRL	(ICTRL_ISCT_SER_7)	/* Take out of serialized mode	*/
 
 /*-----------------------------------------------------------------------
  * USIU - Memory Controller Register
  *-----------------------------------------------------------------------
  */
-#define CFG_BR0_PRELIM		(CFG_FLASH_BASE | BR_V | BR_BI | BR_PS_16 | BR_SETA)
-#define CFG_OR0_PRELIM		(0xffc00000) /* SCY is not used if external TA is set */
+#define CONFIG_SYS_BR0_PRELIM		(CONFIG_SYS_FLASH_BASE | BR_V | BR_BI | BR_PS_16 | BR_SETA)
+#define CONFIG_SYS_OR0_PRELIM		(0xffc00000) /* SCY is not used if external TA is set */
 /* SDRAM */
-#define CFG_BR1_PRELIM		(CFG_SDRAM_BASE | BR_V | BR_BI | BR_PS_32 | BR_SETA)
-#define CFG_OR1_PRELIM		(OR_ADDR_MK_FF) /* SCY is not used if external TA is set */
+#define CONFIG_SYS_BR1_PRELIM		(CONFIG_SYS_SDRAM_BASE | BR_V | BR_BI | BR_PS_32 | BR_SETA)
+#define CONFIG_SYS_OR1_PRELIM		(OR_ADDR_MK_FF) /* SCY is not used if external TA is set */
 /* PCI */
-#define CFG_BR2_PRELIM		(PCI_BASE | BR_V | BR_PS_32 | BR_SETA)
-#define CFG_OR2_PRELIM		(OR_ADDR_MK_FF)
+#define CONFIG_SYS_BR2_PRELIM		(PCI_BASE | BR_V | BR_PS_32 | BR_SETA)
+#define CONFIG_SYS_OR2_PRELIM		(OR_ADDR_MK_FF)
 /* config registers: */
-#define CFG_BR3_PRELIM		(PCI_CONFIG_BASE | BR_V | BR_BI | BR_PS_32 | BR_SETA)
-#define CFG_OR3_PRELIM		(0xffff0000)
+#define CONFIG_SYS_BR3_PRELIM		(PCI_CONFIG_BASE | BR_V | BR_BI | BR_PS_32 | BR_SETA)
+#define CONFIG_SYS_OR3_PRELIM		(0xffff0000)
 
-#define FLASH_BASE0_PRELIM	CFG_FLASH_BASE	/* We don't realign the flash	*/
+#define FLASH_BASE0_PRELIM	CONFIG_SYS_FLASH_BASE	/* We don't realign the flash	*/
 
 /*-----------------------------------------------------------------------
  * DER - Timer Decrementer
  *-----------------------------------------------------------------------
  * Initialise to zero
  */
-#define CFG_DER			0x00000000
+#define CONFIG_SYS_DER			0x00000000
 
 
 /*
diff --git a/include/configs/PCI405.h b/include/configs/PCI405.h
index e70c0d3d4..d0a37d7bc 100644
--- a/include/configs/PCI405.h
+++ b/include/configs/PCI405.h
@@ -60,38 +60,24 @@
 
 #define CONFIG_PREBOOT                  /* enable preboot variable      */
 
-#define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
-#define CFG_LOADS_BAUD_CHANGE	1	/* allow baudrate change	*/
-
-#define CONFIG_MII		1	/* MII PHY management		*/
-#define CONFIG_PHY_ADDR		0	/* PHY address			*/
-
-#define CONFIG_RTC_M48T35A	1		/* ST Electronics M48 timekeeper */
-
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-
 /*
  * Command line configuration.
  */
 #include <config_cmd_default.h>
 
+#undef CONFIG_CMD_IMLS
+#undef CONFIG_CMD_ITEST
+#undef CONFIG_CMD_LOADB
+#undef CONFIG_CMD_LOADS
+#undef CONFIG_CMD_NET
+#undef CONFIG_CMD_NFS
+
 #define CONFIG_CMD_PCI
-#define CONFIG_CMD_IRQ
 #define CONFIG_CMD_ELF
-#define CONFIG_CMD_DATE
 #define CONFIG_CMD_I2C
 #define CONFIG_CMD_BSP
 #define CONFIG_CMD_EEPROM
 
-
 #undef	CONFIG_WATCHDOG			/* watchdog disabled		*/
 
 #define CONFIG_SDRAM_BANK0	1	/* init onboard SDRAM bank 0	*/
@@ -101,43 +87,42 @@
 /*
  * Miscellaneous configurable options
  */
-#define CFG_LONGHELP			/* undef to save memory		*/
-#define CFG_PROMPT	"=> "		/* Monitor Command Prompt	*/
+#define CONFIG_SYS_PROMPT	"=> "		/* Monitor Command Prompt	*/
 
-#define CFG_HUSH_PARSER			/* use "hush" command parser	*/
-#ifdef	CFG_HUSH_PARSER
-#define CFG_PROMPT_HUSH_PS2	"> "
+#define CONFIG_SYS_HUSH_PARSER			/* use "hush" command parser	*/
+#ifdef	CONFIG_SYS_HUSH_PARSER
+#define CONFIG_SYS_PROMPT_HUSH_PS2	"> "
 #endif
 
 #if defined(CONFIG_CMD_KGDB)
-#define CFG_CBSIZE	1024		/* Console I/O Buffer Size	*/
+#define CONFIG_SYS_CBSIZE	1024		/* Console I/O Buffer Size	*/
 #else
-#define CFG_CBSIZE	256		/* Console I/O Buffer Size	*/
+#define CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size	*/
 #endif
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define CFG_MAXARGS	16		/* max number of command args	*/
-#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS	16		/* max number of command args	*/
+#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
 
-#define CFG_DEVICE_NULLDEV	1	/* include nulldev device	*/
+#define CONFIG_SYS_DEVICE_NULLDEV	1	/* include nulldev device	*/
 
-#define CFG_CONSOLE_INFO_QUIET	1	/* don't print console @ startup*/
+#define CONFIG_SYS_CONSOLE_INFO_QUIET	1	/* don't print console @ startup*/
 
-#define CFG_MEMTEST_START	0x0400000	/* memtest works on	*/
-#define CFG_MEMTEST_END		0x0C00000	/* 4 ... 12 MB in DRAM	*/
+#define CONFIG_SYS_MEMTEST_START	0x0400000	/* memtest works on	*/
+#define CONFIG_SYS_MEMTEST_END		0x0C00000	/* 4 ... 12 MB in DRAM	*/
 
-#undef	CFG_EXT_SERIAL_CLOCK	       /* no external serial clock used */
-#define CFG_IGNORE_405_UART_ERRATA_59	/* ignore ppc405gp errata #59	*/
-#define CFG_BASE_BAUD	    691200
+#undef	CONFIG_SYS_EXT_SERIAL_CLOCK	       /* no external serial clock used */
+#define CONFIG_SYS_IGNORE_405_UART_ERRATA_59	/* ignore ppc405gp errata #59	*/
+#define CONFIG_SYS_BASE_BAUD	    691200
 
 /* The following table includes the supported baudrates */
-#define CFG_BAUDRATE_TABLE	\
+#define CONFIG_SYS_BAUDRATE_TABLE	\
 	{ 300, 600, 1200, 2400, 4800, 9600, 19200, 38400,     \
 	 57600, 115200, 230400, 460800, 921600 }
 
-#define CFG_LOAD_ADDR	0x100000	/* default load address */
-#define CFG_EXTBDINFO	1		/* To use extended board_into (bd_t) */
+#define CONFIG_SYS_LOAD_ADDR	0x100000	/* default load address */
+#define CONFIG_SYS_EXTBDINFO	1		/* To use extended board_into (bd_t) */
 
-#define CFG_HZ		1000		/* decrementer freq: 1 ms ticks */
+#define CONFIG_SYS_HZ		1000		/* decrementer freq: 1 ms ticks */
 
 #undef CONFIG_ZERO_BOOTDELAY_CHECK	/* check for keypress on bootdelay==0 */
 
@@ -158,98 +143,79 @@
 
 #define CONFIG_PCI_SCAN_SHOW		/* print pci devices @ startup	*/
 
-#define CFG_PCI_SUBSYS_VENDORID 0x12FE	/* PCI Vendor ID: esd gmbh	*/
-#define CFG_PCI_SUBSYS_DEVICEID 0x0407	/* PCI Device ID: PCI-405	*/
-#define CFG_PCI_CLASSCODE	0x0280	/* PCI Class Code: Network/Other*/
-#define CFG_PCI_PTM1LA	0x00000000	/* point to sdram		*/
-#define CFG_PCI_PTM1MS	0xff000001	/* 16MB, enable hard-wired to 1 */
-#define CFG_PCI_PTM1PCI 0x00000000	/* Host: use this pci address	*/
-
-#if 0 /* test-only */
-#define CFG_PCI_PTM2LA	0xffc00000	/* point to flash		*/
-#define CFG_PCI_PTM2MS	0xffc00001	/* 4MB, enable			*/
-#define CFG_PCI_PTM2PCI 0x04000000	/* Host: use this pci address	*/
-#else
-#define CFG_PCI_PTM2LA	0xef600000	/* point to internal regs	*/
-#define CFG_PCI_PTM2MS	0xffe00001	/* 2MB, enable			*/
-#define CFG_PCI_PTM2PCI 0x00000000	/* Host: use this pci address	*/
-#endif
+#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x12FE	/* PCI Vendor ID: esd gmbh	*/
+#define CONFIG_SYS_PCI_SUBSYS_DEVICEID 0x0407	/* PCI Device ID: PCI-405	*/
+#define CONFIG_SYS_PCI_CLASSCODE	0x0280	/* PCI Class Code: Network/Other*/
+#define CONFIG_SYS_PCI_PTM1LA	0x00000000	/* point to sdram		*/
+#define CONFIG_SYS_PCI_PTM1MS	0xff000001	/* 16MB, enable hard-wired to 1 */
+#define CONFIG_SYS_PCI_PTM1PCI 0x00000000	/* Host: use this pci address	*/
+
+#define CONFIG_SYS_PCI_PTM2LA	0xef600000	/* point to internal regs	*/
+#define CONFIG_SYS_PCI_PTM2MS	0xffe00001	/* 2MB, enable			*/
+#define CONFIG_SYS_PCI_PTM2PCI 0x00000000	/* Host: use this pci address	*/
 
 /*-----------------------------------------------------------------------
  * Start addresses for the final memory configuration
  * (Set up by the startup code)
- * Please note that CFG_SDRAM_BASE _must_ start at 0
+ * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
  */
-#define CFG_SDRAM_BASE		0x00000000
-#define CFG_FLASH_BASE		0xFFFD0000
-#define CFG_MONITOR_BASE	CFG_FLASH_BASE
-#define CFG_MONITOR_LEN		(192 * 1024)	/* Reserve 196 kB for Monitor	*/
-#define CFG_MALLOC_LEN		(128 * 1024)	/* Reserve 128 kB for malloc()	*/
+#define CONFIG_SYS_SDRAM_BASE		0x00000000
+#define CONFIG_SYS_FLASH_BASE		0xFFFD0000
+#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_FLASH_BASE
+#define CONFIG_SYS_MONITOR_LEN		(192 * 1024)	/* Reserve 196 kB for Monitor	*/
+#define CONFIG_SYS_MALLOC_LEN		(128 * 1024)	/* Reserve 128 kB for malloc()	*/
 
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
+#define CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
 /*-----------------------------------------------------------------------
  * FLASH organization
  */
-#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
-#define CFG_MAX_FLASH_SECT	256	/* max number of sectors on one chip	*/
+#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
+#define CONFIG_SYS_MAX_FLASH_SECT	256	/* max number of sectors on one chip	*/
 
-#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
-#define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
+#define CONFIG_SYS_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
+#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
 
-#define CFG_FLASH_WORD_SIZE	unsigned short	/* flash word size (width)	*/
-#define CFG_FLASH_ADDR0		0x5555	/* 1st address for flash config cycles	*/
-#define CFG_FLASH_ADDR1		0x2AAA	/* 2nd address for flash config cycles	*/
+#define CONFIG_SYS_FLASH_WORD_SIZE	unsigned short	/* flash word size (width)	*/
+#define CONFIG_SYS_FLASH_ADDR0		0x5555	/* 1st address for flash config cycles	*/
+#define CONFIG_SYS_FLASH_ADDR1		0x2AAA	/* 2nd address for flash config cycles	*/
 /*
  * The following defines are added for buggy IOP480 byte interface.
  * All other boards should use the standard values (CPCI405 etc.)
  */
-#define CFG_FLASH_READ0		0x0000	/* 0 is standard			*/
-#define CFG_FLASH_READ1		0x0001	/* 1 is standard			*/
-#define CFG_FLASH_READ2		0x0002	/* 2 is standard			*/
-
-#define CFG_FLASH_EMPTY_INFO		/* print 'E' for empty sector on flinfo */
-
-#if 0 /* Use NVRAM for environment variables */
-/*-----------------------------------------------------------------------
- * NVRAM organization
- */
-#define CFG_ENV_IS_IN_NVRAM	1	/* use NVRAM for environment vars	*/
-#define CFG_ENV_SIZE		0x0ff8		/* Size of Environment vars	*/
-#define CFG_ENV_ADDR		\
-	(CFG_NVRAM_BASE_ADDR+CFG_NVRAM_SIZE-(CFG_ENV_SIZE+8))	/* Env	*/
+#define CONFIG_SYS_FLASH_READ0		0x0000	/* 0 is standard			*/
+#define CONFIG_SYS_FLASH_READ1		0x0001	/* 1 is standard			*/
+#define CONFIG_SYS_FLASH_READ2		0x0002	/* 2 is standard			*/
 
-#else /* Use EEPROM for environment variables */
+#define CONFIG_SYS_FLASH_EMPTY_INFO		/* print 'E' for empty sector on flinfo */
 
-#define CFG_ENV_IS_IN_EEPROM	1	/* use EEPROM for environment vars */
-#define CFG_ENV_OFFSET		0x000	/* environment starts at the beginning of the EEPROM */
-#define CFG_ENV_SIZE		0x400	/* 1024 bytes may be used for env vars*/
+#define CONFIG_ENV_IS_IN_EEPROM	1	/* use EEPROM for environment vars */
+#define CONFIG_ENV_OFFSET		0x000	/* environment starts at the beginning of the EEPROM */
+#define CONFIG_ENV_SIZE		0x400	/* 1024 bytes may be used for env vars*/
 				   /* total size of a CAT24WC08 is 1024 bytes */
-#endif
 
-#define CFG_NVRAM_BASE_ADDR	0xf0200000		/* NVRAM base address	*/
-#define CFG_NVRAM_SIZE		(32*1024)		/* NVRAM size		*/
+#define CONFIG_SYS_NVRAM_BASE_ADDR	0xf0200000		/* NVRAM base address	*/
+#define CONFIG_SYS_NVRAM_SIZE		(32*1024)		/* NVRAM size		*/
 
 /*-----------------------------------------------------------------------
  * I2C EEPROM (CAT24WC16) for environment
  */
 #define CONFIG_HARD_I2C			/* I2c with hardware support */
-#define CFG_I2C_SPEED		400000	/* I2C speed and slave address */
-#define CFG_I2C_SLAVE		0x7F
+#define CONFIG_SYS_I2C_SPEED		400000	/* I2C speed and slave address */
+#define CONFIG_SYS_I2C_SLAVE		0x7F
 
-#define CFG_I2C_EEPROM_ADDR	0x50	/* EEPROM CAT28WC08		*/
-#define CFG_I2C_EEPROM_ADDR_LEN 1	/* Bytes of address		*/
+#define CONFIG_SYS_I2C_EEPROM_ADDR	0x50	/* EEPROM CAT28WC08		*/
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1	/* Bytes of address		*/
 /* mask of address bits that overflow into the "EEPROM chip address"	*/
-#define CFG_I2C_EEPROM_ADDR_OVERFLOW	0x07
-#define CFG_EEPROM_PAGE_WRITE_BITS 4	/* The Catalyst CAT24WC08 has	*/
+#define CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW	0x07
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 4	/* The Catalyst CAT24WC08 has	*/
 					/* 16 byte page write mode using*/
 					/* last 4 bits of the address	*/
-#define CFG_EEPROM_PAGE_WRITE_DELAY_MS	10   /* and takes up to 10 msec */
-#define CFG_EEPROM_PAGE_WRITE_ENABLE
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	10   /* and takes up to 10 msec */
 
 /*
  * Init Memory Controller:
@@ -264,89 +230,80 @@
  */
 
 /* Memory Bank 0 (Flash Bank 0) initialization					*/
-#define CFG_EBC_PB0AP		0x92015480
-#define CFG_EBC_PB0CR		0xFFC5A000  /* BAS=0xFFC,BS=4MB,BU=R/W,BW=16bit */
+#define CONFIG_SYS_EBC_PB0AP		0x92015480
+#define CONFIG_SYS_EBC_PB0CR		0xFFC5A000  /* BAS=0xFFC,BS=4MB,BU=R/W,BW=16bit */
 
 /* Memory Bank 1 (NVRAM/RTC) initialization					*/
-#define CFG_EBC_PB1AP		0x01005280  /* TWT=2,WBN=1,WBF=1,TH=1,SOR=1	*/
-#define CFG_EBC_PB1CR		0xF0218000  /* BAS=0xF02,BS=1MB,BU=R/W,BW=8bit	*/
+#define CONFIG_SYS_EBC_PB1AP		0x01005280  /* TWT=2,WBN=1,WBF=1,TH=1,SOR=1	*/
+#define CONFIG_SYS_EBC_PB1CR		0xF0218000  /* BAS=0xF02,BS=1MB,BU=R/W,BW=8bit	*/
 
 /* Memory Bank 2 (CAN0, 1) initialization					*/
-#define CFG_EBC_PB2AP		0x010053C0  /* BWT=2,WBN=1,WBF=1,TH=1,RE=1,SOR=1,BEM=1 */
-/*#define CFG_EBC_PB2AP		  0x038056C0  / * BWT=2,WBN=1,WBF=1,TH=1,RE=1,SOR=1,BEM=1 */
-#define CFG_EBC_PB2CR		0xF0018000  /* BAS=0xF00,BS=1MB,BU=R/W,BW=8bit	*/
+#define CONFIG_SYS_EBC_PB2AP		0x010053C0  /* BWT=2,WBN=1,WBF=1,TH=1,RE=1,SOR=1,BEM=1 */
+/*#define CONFIG_SYS_EBC_PB2AP		  0x038056C0  / * BWT=2,WBN=1,WBF=1,TH=1,RE=1,SOR=1,BEM=1 */
+#define CONFIG_SYS_EBC_PB2CR		0xF0018000  /* BAS=0xF00,BS=1MB,BU=R/W,BW=8bit	*/
 
 /* Memory Bank 3 (FPGA internal) initialization					*/
-#define CFG_EBC_PB3AP		0x010053C0  /* BWT=2,WBN=1,WBF=1,TH=1,RE=1,SOR=1,BEM=1 */
-#define CFG_EBC_PB3CR		0xF041C000  /* BAS=0xF01,BS=1MB,BU=R/W,BW=32bit */
-#define CFG_FPGA_BASE_ADDR	0xF0400000
+#define CONFIG_SYS_EBC_PB3AP		0x010053C0  /* BWT=2,WBN=1,WBF=1,TH=1,RE=1,SOR=1,BEM=1 */
+#define CONFIG_SYS_EBC_PB3CR		0xF041C000  /* BAS=0xF01,BS=1MB,BU=R/W,BW=32bit */
+#define CONFIG_SYS_FPGA_BASE_ADDR	0xF0400000
 
 /*-----------------------------------------------------------------------
  * FPGA stuff
  */
 /* FPGA internal regs */
-#define CFG_FPGA_MODE		0x00
-#define CFG_FPGA_STATUS		0x02
-#define CFG_FPGA_TS		0x04
-#define CFG_FPGA_TS_LOW		0x06
-#define CFG_FPGA_TS_CAP0	0x10
-#define CFG_FPGA_TS_CAP0_LOW	0x12
-#define CFG_FPGA_TS_CAP1	0x14
-#define CFG_FPGA_TS_CAP1_LOW	0x16
-#define CFG_FPGA_TS_CAP2	0x18
-#define CFG_FPGA_TS_CAP2_LOW	0x1a
-#define CFG_FPGA_TS_CAP3	0x1c
-#define CFG_FPGA_TS_CAP3_LOW	0x1e
+#define CONFIG_SYS_FPGA_MODE		0x00
+#define CONFIG_SYS_FPGA_STATUS		0x02
+#define CONFIG_SYS_FPGA_TS		0x04
+#define CONFIG_SYS_FPGA_TS_LOW		0x06
+#define CONFIG_SYS_FPGA_TS_CAP0	0x10
+#define CONFIG_SYS_FPGA_TS_CAP0_LOW	0x12
+#define CONFIG_SYS_FPGA_TS_CAP1	0x14
+#define CONFIG_SYS_FPGA_TS_CAP1_LOW	0x16
+#define CONFIG_SYS_FPGA_TS_CAP2	0x18
+#define CONFIG_SYS_FPGA_TS_CAP2_LOW	0x1a
+#define CONFIG_SYS_FPGA_TS_CAP3	0x1c
+#define CONFIG_SYS_FPGA_TS_CAP3_LOW	0x1e
 
 /* FPGA Mode Reg */
-#define CFG_FPGA_MODE_CF_RESET	0x0001
-#define CFG_FPGA_MODE_TS_IRQ_ENABLE 0x0100
-#define CFG_FPGA_MODE_TS_IRQ_CLEAR  0x1000
-#define CFG_FPGA_MODE_TS_CLEAR	0x2000
+#define CONFIG_SYS_FPGA_MODE_CF_RESET	0x0001
+#define CONFIG_SYS_FPGA_MODE_TS_IRQ_ENABLE 0x0100
+#define CONFIG_SYS_FPGA_MODE_TS_IRQ_CLEAR  0x1000
+#define CONFIG_SYS_FPGA_MODE_TS_CLEAR	0x2000
 
 /* FPGA Status Reg */
-#define CFG_FPGA_STATUS_DIP0	0x0001
-#define CFG_FPGA_STATUS_DIP1	0x0002
-#define CFG_FPGA_STATUS_DIP2	0x0004
-#define CFG_FPGA_STATUS_FLASH	0x0008
-#define CFG_FPGA_STATUS_TS_IRQ	0x1000
+#define CONFIG_SYS_FPGA_STATUS_DIP0	0x0001
+#define CONFIG_SYS_FPGA_STATUS_DIP1	0x0002
+#define CONFIG_SYS_FPGA_STATUS_DIP2	0x0004
+#define CONFIG_SYS_FPGA_STATUS_FLASH	0x0008
+#define CONFIG_SYS_FPGA_STATUS_TS_IRQ	0x1000
 
-#define CFG_FPGA_SPARTAN2	1	    /* using Xilinx Spartan 2 now    */
-#define CFG_FPGA_MAX_SIZE	32*1024	    /* 32kByte is enough for XC2S15  */
+#define CONFIG_SYS_FPGA_SPARTAN2	1	    /* using Xilinx Spartan 2 now    */
+#define CONFIG_SYS_FPGA_MAX_SIZE	32*1024	    /* 32kByte is enough for XC2S15  */
 
 /* FPGA program pin configuration */
-#define CFG_FPGA_PRG		0x04000000  /* FPGA program pin (ppc output) */
-#define CFG_FPGA_CLK		0x02000000  /* FPGA clk pin (ppc output)     */
-#define CFG_FPGA_DATA		0x01000000  /* FPGA data pin (ppc output)    */
-#define CFG_FPGA_INIT		0x00400000  /* FPGA init pin (ppc input)     */
-#define CFG_FPGA_DONE		0x00800000  /* FPGA done pin (ppc input)     */
+#define CONFIG_SYS_FPGA_PRG		0x04000000  /* FPGA program pin (ppc output) */
+#define CONFIG_SYS_FPGA_CLK		0x02000000  /* FPGA clk pin (ppc output)     */
+#define CONFIG_SYS_FPGA_DATA		0x01000000  /* FPGA data pin (ppc output)    */
+#define CONFIG_SYS_FPGA_INIT		0x00400000  /* FPGA init pin (ppc input)     */
+#define CONFIG_SYS_FPGA_DONE		0x00800000  /* FPGA done pin (ppc input)     */
 /* new INIT and DONE pins since board revision 1.2 (for PPC405GPr support)   */
-#define CFG_FPGA_INIT_V12	0x00008000  /* FPGA init pin (ppc input)     */
-#define CFG_FPGA_DONE_V12	0x00010000  /* FPGA done pin (ppc input)     */
+#define CONFIG_SYS_FPGA_INIT_V12	0x00008000  /* FPGA init pin (ppc input)     */
+#define CONFIG_SYS_FPGA_DONE_V12	0x00010000  /* FPGA done pin (ppc input)     */
 
 /*-----------------------------------------------------------------------
  * Definitions for initial stack pointer and data area (in data cache)
  */
-#if 0 /* test-only */
-#define CFG_INIT_DCACHE_CS	7	/* use cs # 7 for data cache memory    */
-#define CFG_INIT_RAM_ADDR	0x40000000  /* use data cache		       */
-#define CFG_INIT_RAM_END	0x2000	/* End of used area in RAM	       */
-#define CFG_GBL_DATA_SIZE      128  /* size in bytes reserved for initial data */
-#define CFG_GBL_DATA_OFFSET    (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
-#else
 /* use on chip memory ( OCM ) for temperary stack until sdram is tested */
-#define CFG_TEMP_STACK_OCM	  1
+#define CONFIG_SYS_TEMP_STACK_OCM	  1
 /* On Chip Memory location */
-#define CFG_OCM_DATA_ADDR	0xF8000000
-#define CFG_OCM_DATA_SIZE	0x1000
-#define CFG_INIT_RAM_ADDR	CFG_OCM_DATA_ADDR /* inside of SDRAM		*/
-#define CFG_INIT_RAM_END	CFG_OCM_DATA_SIZE /* End of used area in RAM	*/
-
-#define CFG_GBL_DATA_SIZE      128  /* size in bytes reserved for initial data */
-#define CFG_GBL_DATA_OFFSET    (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
-#endif
+#define CONFIG_SYS_OCM_DATA_ADDR	0xF8000000
+#define CONFIG_SYS_OCM_DATA_SIZE	0x1000
+#define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_OCM_DATA_ADDR /* inside of SDRAM		*/
+#define CONFIG_SYS_INIT_RAM_END	CONFIG_SYS_OCM_DATA_SIZE /* End of used area in RAM	*/
+
+#define CONFIG_SYS_GBL_DATA_SIZE      128  /* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET    (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
 /*
  * Internal Definitions
diff --git a/include/configs/PCI5441.h b/include/configs/PCI5441.h
index abb9bfc25..481e3354b 100644
--- a/include/configs/PCI5441.h
+++ b/include/configs/PCI5441.h
@@ -30,27 +30,27 @@
 #define	CONFIG_PCI5441		1		/* PCI-5441 board	*/
 #define CONFIG_SYS_CLK_FREQ	50000000	/* 50 MHz core clk	*/
 
-#define CFG_RESET_ADDR		0x00000000	/* Hard-reset address	*/
-#define CFG_EXCEPTION_ADDR	0x01000020	/* Exception entry point*/
-#define CFG_NIOS_SYSID_BASE	0x00920828	/* System id address	*/
+#define CONFIG_SYS_RESET_ADDR		0x00000000	/* Hard-reset address	*/
+#define CONFIG_SYS_EXCEPTION_ADDR	0x01000020	/* Exception entry point*/
+#define CONFIG_SYS_NIOS_SYSID_BASE	0x00920828	/* System id address	*/
 #define	CONFIG_BOARD_EARLY_INIT_F 1	/* enable early board-spec. init*/
 
 /*------------------------------------------------------------------------
  * CACHE -- the following will support II/s and II/f. The II/s does not
  * have dcache, so the cache instructions will behave as NOPs.
  *----------------------------------------------------------------------*/
-#define CFG_ICACHE_SIZE		4096		/* 4 KByte total	*/
-#define CFG_ICACHELINE_SIZE	32		/* 32 bytes/line	*/
-#define CFG_DCACHE_SIZE		2048		/* 2 KByte (II/f)	*/
-#define CFG_DCACHELINE_SIZE	4		/* 4 bytes/line (II/f)	*/
+#define CONFIG_SYS_ICACHE_SIZE		4096		/* 4 KByte total	*/
+#define CONFIG_SYS_ICACHELINE_SIZE	32		/* 32 bytes/line	*/
+#define CONFIG_SYS_DCACHE_SIZE		2048		/* 2 KByte (II/f)	*/
+#define CONFIG_SYS_DCACHELINE_SIZE	4		/* 4 bytes/line (II/f)	*/
 
 /*------------------------------------------------------------------------
  * MEMORY BASE ADDRESSES
  *----------------------------------------------------------------------*/
-#define CFG_FLASH_BASE		0x00000000	/* FLASH base addr	*/
-#define CFG_FLASH_SIZE		0x00800000	/* 8 MByte		*/
-#define CFG_SDRAM_BASE		0x01000000	/* SDRAM base addr	*/
-#define CFG_SDRAM_SIZE		0x01000000	/* 16 MByte		*/
+#define CONFIG_SYS_FLASH_BASE		0x00000000	/* FLASH base addr	*/
+#define CONFIG_SYS_FLASH_SIZE		0x00800000	/* 8 MByte		*/
+#define CONFIG_SYS_SDRAM_BASE		0x01000000	/* SDRAM base addr	*/
+#define CONFIG_SYS_SDRAM_SIZE		0x01000000	/* 16 MByte		*/
 
 /*------------------------------------------------------------------------
  * MEMORY ORGANIZATION
@@ -59,50 +59,50 @@
  *	-Global data is placed below the heap.
  *	-The stack is placed below global data (&grows down).
  *----------------------------------------------------------------------*/
-#define CFG_MONITOR_LEN		(128 * 1024)	/* Reserve 128k		*/
-#define CFG_GBL_DATA_SIZE	128		/* Global data size rsvd*/
-#define CFG_MALLOC_LEN		(CFG_ENV_SIZE + 128*1024)
+#define CONFIG_SYS_MONITOR_LEN		(128 * 1024)	/* Reserve 128k		*/
+#define CONFIG_SYS_GBL_DATA_SIZE	128		/* Global data size rsvd*/
+#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + 128*1024)
 
-#define CFG_MONITOR_BASE	TEXT_BASE
-#define CFG_MALLOC_BASE		(CFG_MONITOR_BASE - CFG_MALLOC_LEN)
-#define CFG_GBL_DATA_OFFSET	(CFG_MALLOC_BASE - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP		CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_MONITOR_BASE	TEXT_BASE
+#define CONFIG_SYS_MALLOC_BASE		(CONFIG_SYS_MONITOR_BASE - CONFIG_SYS_MALLOC_LEN)
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_MALLOC_BASE - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP		CONFIG_SYS_GBL_DATA_OFFSET
 
 /*------------------------------------------------------------------------
  * FLASH (AM29LV065D)
  *----------------------------------------------------------------------*/
-#define CFG_MAX_FLASH_SECT	128		/* Max # sects per bank */
-#define CFG_MAX_FLASH_BANKS	1		/* Max # of flash banks */
-#define CFG_FLASH_ERASE_TOUT	8000		/* Erase timeout (msec) */
-#define CFG_FLASH_WRITE_TOUT	100		/* Write timeout (msec) */
-#define CFG_FLASH_WORD_SIZE	unsigned char	/* flash word size	*/
+#define CONFIG_SYS_MAX_FLASH_SECT	128		/* Max # sects per bank */
+#define CONFIG_SYS_MAX_FLASH_BANKS	1		/* Max # of flash banks */
+#define CONFIG_SYS_FLASH_ERASE_TOUT	8000		/* Erase timeout (msec) */
+#define CONFIG_SYS_FLASH_WRITE_TOUT	100		/* Write timeout (msec) */
+#define CONFIG_SYS_FLASH_WORD_SIZE	unsigned char	/* flash word size	*/
 
 /*------------------------------------------------------------------------
- * ENVIRONMENT -- Put environment in sector CFG_MONITOR_LEN above
- * CFG_RESET_ADDR, since we assume the monitor is stored at the
+ * ENVIRONMENT -- Put environment in sector CONFIG_SYS_MONITOR_LEN above
+ * CONFIG_SYS_RESET_ADDR, since we assume the monitor is stored at the
  * reset address, no? This will keep the environment in user region
  * of flash. NOTE: the monitor length must be multiple of sector size
  * (which is common practice).
  *----------------------------------------------------------------------*/
-#define	CFG_ENV_IS_IN_FLASH	1		/* Environment in flash */
-#define CFG_ENV_SIZE		(64 * 1024)	/* 64 KByte (1 sector)	*/
+#define	CONFIG_ENV_IS_IN_FLASH	1		/* Environment in flash */
+#define CONFIG_ENV_SIZE		(64 * 1024)	/* 64 KByte (1 sector)	*/
 #define CONFIG_ENV_OVERWRITE			/* Serial change Ok	*/
-#define CFG_ENV_ADDR	(CFG_RESET_ADDR + CFG_MONITOR_LEN)
+#define CONFIG_ENV_ADDR	(CONFIG_SYS_RESET_ADDR + CONFIG_SYS_MONITOR_LEN)
 
 /*------------------------------------------------------------------------
  * CONSOLE
  *----------------------------------------------------------------------*/
 #if defined(CONFIG_CONSOLE_JTAG)
-#define CFG_NIOS_CONSOLE	0x00920820	/* JTAG UART base addr	*/
+#define CONFIG_SYS_NIOS_CONSOLE	0x00920820	/* JTAG UART base addr	*/
 #else
-#define CFG_NIOS_CONSOLE	0x009208a0	/* UART base addr	*/
+#define CONFIG_SYS_NIOS_CONSOLE	0x009208a0	/* UART base addr	*/
 #endif
 
-#define CFG_NIOS_FIXEDBAUD	1		/* Baudrate is fixed	*/
+#define CONFIG_SYS_NIOS_FIXEDBAUD	1		/* Baudrate is fixed	*/
 #define CONFIG_BAUDRATE		115200		/* Initial baudrate	*/
-#define CFG_BAUDRATE_TABLE	{115200}	/* It's fixed ;-)	*/
+#define CONFIG_SYS_BAUDRATE_TABLE	{115200}	/* It's fixed ;-)	*/
 
-#define CFG_CONSOLE_INFO_QUIET	1		/* Suppress console info*/
+#define CONFIG_SYS_CONSOLE_INFO_QUIET	1		/* Suppress console info*/
 
 /*------------------------------------------------------------------------
  * DEBUG
@@ -116,11 +116,11 @@
  * registers, we can slow it down to 10 msec using TMRCNT. If the default
  * period is acceptable, TMRCNT can be left undefined.
  *----------------------------------------------------------------------*/
-#define CFG_NIOS_TMRBASE	0x00920860	/* Tick timer base addr	*/
-#define CFG_NIOS_TMRIRQ		3		/* Timer IRQ num	*/
-#define CFG_NIOS_TMRMS		10		/* 10 msec per tick	*/
-#define CFG_NIOS_TMRCNT	(CFG_NIOS_TMRMS * (CONFIG_SYS_CLK_FREQ/1000))
-#define	CFG_HZ		(CONFIG_SYS_CLK_FREQ/(CFG_NIOS_TMRCNT + 1))
+#define CONFIG_SYS_NIOS_TMRBASE	0x00920860	/* Tick timer base addr	*/
+#define CONFIG_SYS_NIOS_TMRIRQ		3		/* Timer IRQ num	*/
+#define CONFIG_SYS_NIOS_TMRMS		10		/* 10 msec per tick	*/
+#define CONFIG_SYS_NIOS_TMRCNT	(CONFIG_SYS_NIOS_TMRMS * (CONFIG_SYS_CLK_FREQ/1000))
+#define	CONFIG_SYS_HZ		(CONFIG_SYS_CLK_FREQ/(CONFIG_SYS_NIOS_TMRCNT + 1))
 
 
 /*
@@ -152,14 +152,14 @@
 /*------------------------------------------------------------------------
  * MISC
  *----------------------------------------------------------------------*/
-#define	CFG_LONGHELP				/* Provide extended help*/
-#define	CFG_PROMPT		"==> "		/* Command prompt	*/
-#define	CFG_CBSIZE		256		/* Console I/O buf size	*/
-#define	CFG_MAXARGS		16		/* Max command args	*/
-#define CFG_BARGSIZE		CFG_CBSIZE	/* Boot arg buf size	*/
-#define	CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print buf size	*/
-#define	CFG_LOAD_ADDR		CFG_SDRAM_BASE	/* Default load address	*/
-#define CFG_MEMTEST_START	CFG_SDRAM_BASE	/* Start addr for test	*/
-#define CFG_MEMTEST_END		CFG_INIT_SP - 0x00020000
+#define	CONFIG_SYS_LONGHELP				/* Provide extended help*/
+#define	CONFIG_SYS_PROMPT		"==> "		/* Command prompt	*/
+#define	CONFIG_SYS_CBSIZE		256		/* Console I/O buf size	*/
+#define	CONFIG_SYS_MAXARGS		16		/* Max command args	*/
+#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot arg buf size	*/
+#define	CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print buf size	*/
+#define	CONFIG_SYS_LOAD_ADDR		CONFIG_SYS_SDRAM_BASE	/* Default load address	*/
+#define CONFIG_SYS_MEMTEST_START	CONFIG_SYS_SDRAM_BASE	/* Start addr for test	*/
+#define CONFIG_SYS_MEMTEST_END		CONFIG_SYS_INIT_SP - 0x00020000
 
 #endif	/* __CONFIG_H */
diff --git a/include/configs/PCIPPC2.h b/include/configs/PCIPPC2.h
index 6ebaa85e8..5951d007d 100644
--- a/include/configs/PCIPPC2.h
+++ b/include/configs/PCIPPC2.h
@@ -48,7 +48,7 @@
 
 #define CONFIG_CONS_INDEX	1
 #define CONFIG_BAUDRATE		9600
-#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
 
 #define CONFIG_PREBOOT		""
 #define CONFIG_BOOTDELAY	5
@@ -89,51 +89,51 @@
 /*
  * Miscellaneous configurable options
  */
-#define CFG_LONGHELP			/* undef to save memory		*/
-#define CFG_PROMPT	"=> "		/* Monitor Command Prompt	*/
+#define CONFIG_SYS_LONGHELP			/* undef to save memory		*/
+#define CONFIG_SYS_PROMPT	"=> "		/* Monitor Command Prompt	*/
 
-#define	CFG_HUSH_PARSER		1	/* use "hush" command parser	*/
-#ifdef	CFG_HUSH_PARSER
-#define	CFG_PROMPT_HUSH_PS2	"> "
+#define	CONFIG_SYS_HUSH_PARSER		1	/* use "hush" command parser	*/
+#ifdef	CONFIG_SYS_HUSH_PARSER
+#define	CONFIG_SYS_PROMPT_HUSH_PS2	"> "
 #endif
-#define CFG_CBSIZE	256		/* Console I/O Buffer Size	*/
+#define CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size	*/
 
 /* Print Buffer Size
  */
-#define CFG_PBSIZE	(CFG_CBSIZE + sizeof(CFG_PROMPT) + 16)
+#define CONFIG_SYS_PBSIZE	(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
 
-#define	CFG_MAXARGS	64		/* max number of command args	*/
-#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size	*/
-#define CFG_LOAD_ADDR	0x00100000	/* Default load address		*/
+#define	CONFIG_SYS_MAXARGS	64		/* max number of command args	*/
+#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
+#define CONFIG_SYS_LOAD_ADDR	0x00100000	/* Default load address		*/
 
 /*-----------------------------------------------------------------------
  * Start addresses for the final memory configuration
  * (Set up by the startup code)
- * Please note that CFG_SDRAM_BASE _must_ start at 0
+ * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
  */
-#define CFG_SDRAM_BASE	    0x00000000
-#define CFG_FLASH_BASE	    0xFFF00000
-#define CFG_FLASH_MAX_SIZE  0x00100000
+#define CONFIG_SYS_SDRAM_BASE	    0x00000000
+#define CONFIG_SYS_FLASH_BASE	    0xFFF00000
+#define CONFIG_SYS_FLASH_MAX_SIZE  0x00100000
 /* Maximum amount of RAM.
  */
-#define CFG_MAX_RAM_SIZE    0x20000000  /* 512Mb			*/
+#define CONFIG_SYS_MAX_RAM_SIZE    0x20000000  /* 512Mb			*/
 
-#define CFG_RESET_ADDRESS   0xFFF00100
+#define CONFIG_SYS_RESET_ADDRESS   0xFFF00100
 
-#define CFG_MONITOR_BASE    TEXT_BASE
+#define CONFIG_SYS_MONITOR_BASE    TEXT_BASE
 
-#define CFG_MONITOR_LEN	    (256 << 10) /* Reserve 256 kB for Monitor	*/
-#define CFG_MALLOC_LEN	    (128 << 10) /* Reserve 128 kB for malloc()	*/
+#define CONFIG_SYS_MONITOR_LEN	    (256 << 10) /* Reserve 256 kB for Monitor	*/
+#define CONFIG_SYS_MALLOC_LEN	    (128 << 10) /* Reserve 128 kB for malloc()	*/
 
-#if CFG_MONITOR_BASE >= CFG_SDRAM_BASE && \
-    CFG_MONITOR_BASE < CFG_SDRAM_BASE + CFG_MAX_RAM_SIZE
-#define CFG_RAMBOOT
+#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_SDRAM_BASE && \
+    CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_SDRAM_BASE + CONFIG_SYS_MAX_RAM_SIZE
+#define CONFIG_SYS_RAMBOOT
 #else
-#undef CFG_RAMBOOT
+#undef CONFIG_SYS_RAMBOOT
 #endif
 
-#define CFG_MEMTEST_START   0x00004000	/* memtest works on		*/
-#define CFG_MEMTEST_END	    0x02000000	/* 0 ... 32 MB in DRAM		*/
+#define CONFIG_SYS_MEMTEST_START   0x00004000	/* memtest works on		*/
+#define CONFIG_SYS_MEMTEST_END	    0x02000000	/* 0 ... 32 MB in DRAM		*/
 
 /*-----------------------------------------------------------------------
  * Definitions for initial stack pointer and data area
@@ -141,54 +141,54 @@
 
 /* Size in bytes reserved for initial data
  */
-#define CFG_GBL_DATA_SIZE    128
+#define CONFIG_SYS_GBL_DATA_SIZE    128
 
-#define CFG_INIT_RAM_ADDR     0x40000000
-#define CFG_INIT_RAM_END      0x8000
-#define CFG_GBL_DATA_OFFSET  (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP_OFFSET    CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_INIT_RAM_ADDR     0x40000000
+#define CONFIG_SYS_INIT_RAM_END      0x8000
+#define CONFIG_SYS_GBL_DATA_OFFSET  (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET    CONFIG_SYS_GBL_DATA_OFFSET
 
-#define CFG_INIT_RAM_LOCK
+#define CONFIG_SYS_INIT_RAM_LOCK
 
 /*
  * Temporary buffer for serial data until the real serial driver
  * is initialised (memtest will destroy this buffer)
  */
-#define CFG_SCONSOLE_ADDR     CFG_INIT_RAM_ADDR
-#define CFG_SCONSOLE_SIZE     0x0002000
+#define CONFIG_SYS_SCONSOLE_ADDR     CONFIG_SYS_INIT_RAM_ADDR
+#define CONFIG_SYS_SCONSOLE_SIZE     0x0002000
 
 /* SDRAM 0 - 256MB
  */
-#define CFG_DBAT0L	      (CFG_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
-#define CFG_DBAT0U	      (CFG_SDRAM_BASE | \
+#define CONFIG_SYS_DBAT0L	      (CONFIG_SYS_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
+#define CONFIG_SYS_DBAT0U	      (CONFIG_SYS_SDRAM_BASE | \
 			       BATU_BL_256M | BATU_VS | BATU_VP)
 /* SDRAM 1 - 256MB
  */
-#define CFG_DBAT1L	      ((CFG_SDRAM_BASE + 0x10000000) | \
+#define CONFIG_SYS_DBAT1L	      ((CONFIG_SYS_SDRAM_BASE + 0x10000000) | \
 			       BATL_PP_10 | BATL_MEMCOHERENCE)
-#define CFG_DBAT1U	      ((CFG_SDRAM_BASE + 0x10000000) | \
+#define CONFIG_SYS_DBAT1U	      ((CONFIG_SYS_SDRAM_BASE + 0x10000000) | \
 			       BATU_BL_256M | BATU_VS | BATU_VP)
 
 /* Init RAM in the CPU DCache (no backing memory)
  */
-#define CFG_DBAT2L	      (CFG_INIT_RAM_ADDR | \
+#define CONFIG_SYS_DBAT2L	      (CONFIG_SYS_INIT_RAM_ADDR | \
 			       BATL_PP_10 | BATL_MEMCOHERENCE)
-#define CFG_DBAT2U	      (CFG_INIT_RAM_ADDR | \
+#define CONFIG_SYS_DBAT2U	      (CONFIG_SYS_INIT_RAM_ADDR | \
 			       BATU_BL_128K | BATU_VS | BATU_VP)
 
 /* I/O and PCI memory at 0xf0000000
  */
-#define CFG_DBAT3L	      (0xf0000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
-#define CFG_DBAT3U	      (0xf0000000 | BATU_BL_256M | BATU_VS | BATU_VP)
-
-#define CFG_IBAT0L	      CFG_DBAT0L
-#define CFG_IBAT0U	      CFG_DBAT0U
-#define CFG_IBAT1L	      CFG_DBAT1L
-#define CFG_IBAT1U	      CFG_DBAT1U
-#define CFG_IBAT2L	      CFG_DBAT2L
-#define CFG_IBAT2U	      CFG_DBAT2U
-#define CFG_IBAT3L	      CFG_DBAT3L
-#define CFG_IBAT3U	      CFG_DBAT3U
+#define CONFIG_SYS_DBAT3L	      (0xf0000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
+#define CONFIG_SYS_DBAT3U	      (0xf0000000 | BATU_BL_256M | BATU_VS | BATU_VP)
+
+#define CONFIG_SYS_IBAT0L	      CONFIG_SYS_DBAT0L
+#define CONFIG_SYS_IBAT0U	      CONFIG_SYS_DBAT0U
+#define CONFIG_SYS_IBAT1L	      CONFIG_SYS_DBAT1L
+#define CONFIG_SYS_IBAT1U	      CONFIG_SYS_DBAT1U
+#define CONFIG_SYS_IBAT2L	      CONFIG_SYS_DBAT2L
+#define CONFIG_SYS_IBAT2U	      CONFIG_SYS_DBAT2U
+#define CONFIG_SYS_IBAT3L	      CONFIG_SYS_DBAT3L
+#define CONFIG_SYS_IBAT3U	      CONFIG_SYS_DBAT3U
 
 /*
  * Low Level Configuration Settings
@@ -196,48 +196,48 @@
  * You should know what you are doing if you make changes here.
  * For the detail description refer to the PCIPPC2 user's manual.
  */
-#define CFG_HZ		      1000
-#define CFG_BUS_HZ            100000000 /* bus speed - 100 mhz          */
-#define CFG_CPU_CLK	      300000000
-#define CFG_BUS_CLK	      100000000
+#define CONFIG_SYS_HZ		      1000
+#define CONFIG_SYS_BUS_HZ            100000000 /* bus speed - 100 mhz          */
+#define CONFIG_SYS_CPU_CLK	      300000000
+#define CONFIG_SYS_BUS_CLK	      100000000
 
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define CFG_BOOTMAPSZ	      (8 << 20)	/* Initial Memory map for Linux */
+#define CONFIG_SYS_BOOTMAPSZ	      (8 << 20)	/* Initial Memory map for Linux */
 
 /*-----------------------------------------------------------------------
  * FLASH organization
  */
-#define CFG_MAX_FLASH_BANKS	1	/* Max number of flash banks		*/
-#define CFG_MAX_FLASH_SECT	16	/* Max number of sectors in one bank	*/
+#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* Max number of flash banks		*/
+#define CONFIG_SYS_MAX_FLASH_SECT	16	/* Max number of sectors in one bank	*/
 
-#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
-#define CFG_FLASH_WRITE_TOUT	1000	/* Timeout for Flash Write (in ms)	*/
+#define CONFIG_SYS_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
+#define CONFIG_SYS_FLASH_WRITE_TOUT	1000	/* Timeout for Flash Write (in ms)	*/
 
 /*
  * Note: environment is not EMBEDDED in the U-Boot code.
  * It's stored in flash separately.
  */
-#define CFG_ENV_IS_IN_FLASH	1
-#define CFG_ENV_ADDR		(CFG_FLASH_BASE + 0x70000)
-#define CFG_ENV_SIZE		0x1000	/* Size of the Environment		*/
-#define CFG_ENV_SECT_SIZE	0x10000 /* Size of the Environment Sector	*/
+#define CONFIG_ENV_IS_IN_FLASH	1
+#define CONFIG_ENV_ADDR		(CONFIG_SYS_FLASH_BASE + 0x70000)
+#define CONFIG_ENV_SIZE		0x1000	/* Size of the Environment		*/
+#define CONFIG_ENV_SECT_SIZE	0x10000 /* Size of the Environment Sector	*/
 
 /*-----------------------------------------------------------------------
  * Cache Configuration
  */
-#define CFG_CACHELINE_SIZE	32
+#define CONFIG_SYS_CACHELINE_SIZE	32
 #if defined(CONFIG_CMD_KGDB)
-#  define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value	*/
+#  define CONFIG_SYS_CACHELINE_SHIFT	5	/* log base 2 of the above value	*/
 #endif
 
 /*
  * L2 cache
  */
-#undef CFG_L2
+#undef CONFIG_SYS_L2
 #define L2_INIT   (L2CR_L2SIZ_2M | L2CR_L2CLK_3 | L2CR_L2RAM_BURST | \
 		   L2CR_L2OH_5 | L2CR_L2CTL | L2CR_L2WT)
 #define L2_ENABLE (L2_INIT | L2CR_L2E)
@@ -254,10 +254,10 @@
  * Disk-On-Chip configuration
  */
 
-#define CFG_MAX_DOC_DEVICE	1	/* Max number of DOC devices		*/
+#define CONFIG_SYS_MAX_DOC_DEVICE	1	/* Max number of DOC devices		*/
 
-#define CFG_DOC_SUPPORT_2000
-#undef CFG_DOC_SUPPORT_MILLENNIUM
+#define CONFIG_SYS_DOC_SUPPORT_2000
+#undef CONFIG_SYS_DOC_SUPPORT_MILLENNIUM
 
 /*-----------------------------------------------------------------------
   RTC m48t59
@@ -269,7 +269,7 @@
 #define CONFIG_NET_MULTI			/* Multi ethernet cards support */
 
 #define CONFIG_EEPRO100
-#define CFG_RX_ETH_BUFFER	8               /* use 8 rx buffer on eepro100  */
+#define CONFIG_SYS_RX_ETH_BUFFER	8               /* use 8 rx buffer on eepro100  */
 #define CONFIG_TULIP
 
 #endif	/* __CONFIG_H */
diff --git a/include/configs/PCIPPC6.h b/include/configs/PCIPPC6.h
index 9202794ab..a683a8fbb 100644
--- a/include/configs/PCIPPC6.h
+++ b/include/configs/PCIPPC6.h
@@ -48,7 +48,7 @@
 
 #define CONFIG_CONS_INDEX	1
 #define CONFIG_BAUDRATE		9600
-#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
 
 #define CONFIG_PREBOOT		""
 #define CONFIG_BOOTDELAY	5
@@ -91,51 +91,51 @@
 /*
  * Miscellaneous configurable options
  */
-#define CFG_LONGHELP			/* undef to save memory		*/
-#define CFG_PROMPT	"=> "		/* Monitor Command Prompt	*/
+#define CONFIG_SYS_LONGHELP			/* undef to save memory		*/
+#define CONFIG_SYS_PROMPT	"=> "		/* Monitor Command Prompt	*/
 
-#define CFG_HUSH_PARSER		1	/* use "hush" command parser	*/
-#ifdef	CFG_HUSH_PARSER
-#define CFG_PROMPT_HUSH_PS2	"> "
+#define CONFIG_SYS_HUSH_PARSER		1	/* use "hush" command parser	*/
+#ifdef	CONFIG_SYS_HUSH_PARSER
+#define CONFIG_SYS_PROMPT_HUSH_PS2	"> "
 #endif
-#define CFG_CBSIZE	256		/* Console I/O Buffer Size	*/
+#define CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size	*/
 
 /* Print Buffer Size
  */
-#define CFG_PBSIZE	(CFG_CBSIZE + sizeof(CFG_PROMPT) + 16)
+#define CONFIG_SYS_PBSIZE	(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
 
-#define CFG_MAXARGS	64		/* max number of command args	*/
-#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size	*/
-#define CFG_LOAD_ADDR	0x00100000	/* Default load address		*/
+#define CONFIG_SYS_MAXARGS	64		/* max number of command args	*/
+#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
+#define CONFIG_SYS_LOAD_ADDR	0x00100000	/* Default load address		*/
 
 /*-----------------------------------------------------------------------
  * Start addresses for the final memory configuration
  * (Set up by the startup code)
- * Please note that CFG_SDRAM_BASE _must_ start at 0
+ * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
  */
-#define CFG_SDRAM_BASE	    0x00000000
-#define CFG_FLASH_BASE	    0xFFF00000
-#define CFG_FLASH_MAX_SIZE  0x00100000
+#define CONFIG_SYS_SDRAM_BASE	    0x00000000
+#define CONFIG_SYS_FLASH_BASE	    0xFFF00000
+#define CONFIG_SYS_FLASH_MAX_SIZE  0x00100000
 /* Maximum amount of RAM.
  */
-#define CFG_MAX_RAM_SIZE    0x20000000	/* 512Mb			*/
+#define CONFIG_SYS_MAX_RAM_SIZE    0x20000000	/* 512Mb			*/
 
-#define CFG_RESET_ADDRESS   0xFFF00100
+#define CONFIG_SYS_RESET_ADDRESS   0xFFF00100
 
-#define CFG_MONITOR_BASE    TEXT_BASE
+#define CONFIG_SYS_MONITOR_BASE    TEXT_BASE
 
-#define CFG_MONITOR_LEN	    (256 << 10) /* Reserve 256 kB for Monitor	*/
-#define CFG_MALLOC_LEN	    (128 << 10) /* Reserve 128 kB for malloc()	*/
+#define CONFIG_SYS_MONITOR_LEN	    (256 << 10) /* Reserve 256 kB for Monitor	*/
+#define CONFIG_SYS_MALLOC_LEN	    (128 << 10) /* Reserve 128 kB for malloc()	*/
 
-#if CFG_MONITOR_BASE >= CFG_SDRAM_BASE && \
-    CFG_MONITOR_BASE < CFG_SDRAM_BASE + CFG_MAX_RAM_SIZE
-#define CFG_RAMBOOT
+#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_SDRAM_BASE && \
+    CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_SDRAM_BASE + CONFIG_SYS_MAX_RAM_SIZE
+#define CONFIG_SYS_RAMBOOT
 #else
-#undef CFG_RAMBOOT
+#undef CONFIG_SYS_RAMBOOT
 #endif
 
-#define CFG_MEMTEST_START   0x00004000	/* memtest works on		*/
-#define CFG_MEMTEST_END	    0x02000000	/* 0 ... 32 MB in DRAM		*/
+#define CONFIG_SYS_MEMTEST_START   0x00004000	/* memtest works on		*/
+#define CONFIG_SYS_MEMTEST_END	    0x02000000	/* 0 ... 32 MB in DRAM		*/
 
 /*-----------------------------------------------------------------------
  * Definitions for initial stack pointer and data area
@@ -143,54 +143,54 @@
 
 /* Size in bytes reserved for initial data
  */
-#define CFG_GBL_DATA_SIZE    128
+#define CONFIG_SYS_GBL_DATA_SIZE    128
 
-#define CFG_INIT_RAM_ADDR     0x40000000
-#define CFG_INIT_RAM_END      0x8000
-#define CFG_GBL_DATA_OFFSET  (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP_OFFSET    CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_INIT_RAM_ADDR     0x40000000
+#define CONFIG_SYS_INIT_RAM_END      0x8000
+#define CONFIG_SYS_GBL_DATA_OFFSET  (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET    CONFIG_SYS_GBL_DATA_OFFSET
 
-#define CFG_INIT_RAM_LOCK
+#define CONFIG_SYS_INIT_RAM_LOCK
 
 /*
  * Temporary buffer for serial data until the real serial driver
  * is initialised (memtest will destroy this buffer)
  */
-#define CFG_SCONSOLE_ADDR     CFG_INIT_RAM_ADDR
-#define CFG_SCONSOLE_SIZE     0x0002000
+#define CONFIG_SYS_SCONSOLE_ADDR     CONFIG_SYS_INIT_RAM_ADDR
+#define CONFIG_SYS_SCONSOLE_SIZE     0x0002000
 
 /* SDRAM 0 - 256MB
  */
-#define CFG_DBAT0L	      (CFG_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
-#define CFG_DBAT0U	      (CFG_SDRAM_BASE | \
+#define CONFIG_SYS_DBAT0L	      (CONFIG_SYS_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
+#define CONFIG_SYS_DBAT0U	      (CONFIG_SYS_SDRAM_BASE | \
 			       BATU_BL_256M | BATU_VS | BATU_VP)
 /* SDRAM 1 - 256MB
  */
-#define CFG_DBAT1L	      ((CFG_SDRAM_BASE + 0x10000000) | \
+#define CONFIG_SYS_DBAT1L	      ((CONFIG_SYS_SDRAM_BASE + 0x10000000) | \
 			       BATL_PP_10 | BATL_MEMCOHERENCE)
-#define CFG_DBAT1U	      ((CFG_SDRAM_BASE + 0x10000000) | \
+#define CONFIG_SYS_DBAT1U	      ((CONFIG_SYS_SDRAM_BASE + 0x10000000) | \
 			       BATU_BL_256M | BATU_VS | BATU_VP)
 
 /* Init RAM in the CPU DCache (no backing memory)
  */
-#define CFG_DBAT2L	      (CFG_INIT_RAM_ADDR | \
+#define CONFIG_SYS_DBAT2L	      (CONFIG_SYS_INIT_RAM_ADDR | \
 			       BATL_PP_10 | BATL_MEMCOHERENCE)
-#define CFG_DBAT2U	      (CFG_INIT_RAM_ADDR | \
+#define CONFIG_SYS_DBAT2U	      (CONFIG_SYS_INIT_RAM_ADDR | \
 			       BATU_BL_128K | BATU_VS | BATU_VP)
 
 /* I/O and PCI memory at 0xf0000000
  */
-#define CFG_DBAT3L	      (0xf0000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
-#define CFG_DBAT3U	      (0xf0000000 | BATU_BL_256M | BATU_VS | BATU_VP)
-
-#define CFG_IBAT0L	      CFG_DBAT0L
-#define CFG_IBAT0U	      CFG_DBAT0U
-#define CFG_IBAT1L	      CFG_DBAT1L
-#define CFG_IBAT1U	      CFG_DBAT1U
-#define CFG_IBAT2L	      CFG_DBAT2L
-#define CFG_IBAT2U	      CFG_DBAT2U
-#define CFG_IBAT3L	      CFG_DBAT3L
-#define CFG_IBAT3U	      CFG_DBAT3U
+#define CONFIG_SYS_DBAT3L	      (0xf0000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
+#define CONFIG_SYS_DBAT3U	      (0xf0000000 | BATU_BL_256M | BATU_VS | BATU_VP)
+
+#define CONFIG_SYS_IBAT0L	      CONFIG_SYS_DBAT0L
+#define CONFIG_SYS_IBAT0U	      CONFIG_SYS_DBAT0U
+#define CONFIG_SYS_IBAT1L	      CONFIG_SYS_DBAT1L
+#define CONFIG_SYS_IBAT1U	      CONFIG_SYS_DBAT1U
+#define CONFIG_SYS_IBAT2L	      CONFIG_SYS_DBAT2L
+#define CONFIG_SYS_IBAT2U	      CONFIG_SYS_DBAT2U
+#define CONFIG_SYS_IBAT3L	      CONFIG_SYS_DBAT3L
+#define CONFIG_SYS_IBAT3U	      CONFIG_SYS_DBAT3U
 
 /*
  * Low Level Configuration Settings
@@ -198,48 +198,48 @@
  * You should know what you are doing if you make changes here.
  * For the detail description refer to the PCIPPC2 user's manual.
  */
-#define CFG_HZ		      1000
-#define CFG_BUS_HZ	      100000000 /* bus speed - 100 mhz		*/
-#define CFG_CPU_CLK	      300000000
-#define CFG_BUS_CLK	      100000000
+#define CONFIG_SYS_HZ		      1000
+#define CONFIG_SYS_BUS_HZ	      100000000 /* bus speed - 100 mhz		*/
+#define CONFIG_SYS_CPU_CLK	      300000000
+#define CONFIG_SYS_BUS_CLK	      100000000
 
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define CFG_BOOTMAPSZ	      (8 << 20) /* Initial Memory map for Linux */
+#define CONFIG_SYS_BOOTMAPSZ	      (8 << 20) /* Initial Memory map for Linux */
 
 /*-----------------------------------------------------------------------
  * FLASH organization
  */
-#define CFG_MAX_FLASH_BANKS	1	/* Max number of flash banks		*/
-#define CFG_MAX_FLASH_SECT	16	/* Max number of sectors in one bank	*/
+#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* Max number of flash banks		*/
+#define CONFIG_SYS_MAX_FLASH_SECT	16	/* Max number of sectors in one bank	*/
 
-#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
-#define CFG_FLASH_WRITE_TOUT	1000	/* Timeout for Flash Write (in ms)	*/
+#define CONFIG_SYS_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
+#define CONFIG_SYS_FLASH_WRITE_TOUT	1000	/* Timeout for Flash Write (in ms)	*/
 
 /*
  * Note: environment is not EMBEDDED in the U-Boot code.
  * It's stored in flash separately.
  */
-#define CFG_ENV_IS_IN_FLASH	1
-#define CFG_ENV_ADDR		(CFG_FLASH_BASE + 0x70000)
-#define CFG_ENV_SIZE		0x1000	/* Size of the Environment		*/
-#define CFG_ENV_SECT_SIZE	0x10000 /* Size of the Environment Sector	*/
+#define CONFIG_ENV_IS_IN_FLASH	1
+#define CONFIG_ENV_ADDR		(CONFIG_SYS_FLASH_BASE + 0x70000)
+#define CONFIG_ENV_SIZE		0x1000	/* Size of the Environment		*/
+#define CONFIG_ENV_SECT_SIZE	0x10000 /* Size of the Environment Sector	*/
 
 /*-----------------------------------------------------------------------
  * Cache Configuration
  */
-#define CFG_CACHELINE_SIZE	32
+#define CONFIG_SYS_CACHELINE_SIZE	32
 #if defined(CONFIG_CMD_KGDB)
-#  define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value	*/
+#  define CONFIG_SYS_CACHELINE_SHIFT	5	/* log base 2 of the above value	*/
 #endif
 
 /*
  * L2 cache
  */
-#undef CFG_L2
+#undef CONFIG_SYS_L2
 #define L2_INIT	  (L2CR_L2SIZ_2M | L2CR_L2CLK_3 | L2CR_L2RAM_BURST | \
 		   L2CR_L2OH_5 | L2CR_L2CTL | L2CR_L2WT)
 #define L2_ENABLE (L2_INIT | L2CR_L2E)
@@ -256,10 +256,10 @@
  * Disk-On-Chip configuration
  */
 
-#define CFG_MAX_DOC_DEVICE	1	/* Max number of DOC devices		*/
+#define CONFIG_SYS_MAX_DOC_DEVICE	1	/* Max number of DOC devices		*/
 
-#define CFG_DOC_SUPPORT_2000
-#undef CFG_DOC_SUPPORT_MILLENNIUM
+#define CONFIG_SYS_DOC_SUPPORT_2000
+#undef CONFIG_SYS_DOC_SUPPORT_MILLENNIUM
 
 /*-----------------------------------------------------------------------
   RTC m48t59
@@ -271,17 +271,17 @@
 #define CONFIG_NET_MULTI		/* Multi ethernet cards support */
 
 #define CONFIG_EEPRO100
-#define CFG_RX_ETH_BUFFER	8               /* use 8 rx buffer on eepro100  */
+#define CONFIG_SYS_RX_ETH_BUFFER	8               /* use 8 rx buffer on eepro100  */
 #define CONFIG_TULIP
 
 
 #define CONFIG_SCSI_SYM53C8XX
 #define CONFIG_SCSI_DEV_ID	0x000B	/* 53c896 */
-#define CFG_SCSI_MAX_LUN	8	/* number of supported LUNs */
-#define CFG_SCSI_MAX_SCSI_ID	15	/* maximum SCSI ID (0..6) */
-#define CFG_SCSI_MAX_DEVICE	CFG_SCSI_MAX_SCSI_ID * CFG_SCSI_MAX_LUN /* maximum Target devices */
-#define CFG_SCSI_SPIN_UP_TIME	2
-#define CFG_SCSI_SCAN_BUS_REVERSE 0
+#define CONFIG_SYS_SCSI_MAX_LUN	8	/* number of supported LUNs */
+#define CONFIG_SYS_SCSI_MAX_SCSI_ID	15	/* maximum SCSI ID (0..6) */
+#define CONFIG_SYS_SCSI_MAX_DEVICE	CONFIG_SYS_SCSI_MAX_SCSI_ID * CONFIG_SYS_SCSI_MAX_LUN /* maximum Target devices */
+#define CONFIG_SYS_SCSI_SPIN_UP_TIME	2
+#define CONFIG_SYS_SCSI_SCAN_BUS_REVERSE 0
 #define CONFIG_DOS_PARTITION
 #define CONFIG_MAC_PARTITION
 #define CONFIG_ISO_PARTITION
diff --git a/include/configs/PIP405.h b/include/configs/PIP405.h
index 2ceda001c..5c4d69b20 100644
--- a/include/configs/PIP405.h
+++ b/include/configs/PIP405.h
@@ -79,8 +79,8 @@
 
 #define CONFIG_NAND_LEGACY
 
-#define	 CFG_HUSH_PARSER
-#define	 CFG_PROMPT_HUSH_PS2 "> "
+#define	 CONFIG_SYS_HUSH_PARSER
+#define	 CONFIG_SYS_PROMPT_HUSH_PS2 "> "
 /**************************************************************
  * I2C Stuff:
  * the PIP405 is equiped with an Atmel 24C128/256 EEPROM at address
@@ -90,21 +90,20 @@
  * The Atmel EEPROM uses 16Bit addressing.
  ***************************************************************/
 #define CONFIG_HARD_I2C			/* I2c with hardware support */
-#define CFG_I2C_SPEED		50000	/* I2C speed and slave address */
-#define CFG_I2C_SLAVE		0x7F
+#define CONFIG_SYS_I2C_SPEED		50000	/* I2C speed and slave address */
+#define CONFIG_SYS_I2C_SLAVE		0x7F
 
-#define CFG_I2C_EEPROM_ADDR	0x53
-#define CFG_I2C_EEPROM_ADDR_LEN	2
-#define CFG_ENV_IS_IN_EEPROM    1       /* use EEPROM for environment vars */
-#define CFG_ENV_OFFSET          0x000   /* environment starts at the beginning of the EEPROM */
-#define CFG_ENV_SIZE            0x800   /* 2 kBytes may be used for env vars */
+#define CONFIG_SYS_I2C_EEPROM_ADDR	0x53
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN	2
+#define CONFIG_ENV_IS_IN_EEPROM    1       /* use EEPROM for environment vars */
+#define CONFIG_ENV_OFFSET          0x000   /* environment starts at the beginning of the EEPROM */
+#define CONFIG_ENV_SIZE            0x800   /* 2 kBytes may be used for env vars */
 
-#undef CFG_I2C_EEPROM_ADDR_OVERFLOW
-#define CFG_EEPROM_PAGE_WRITE_BITS 6	/* The Atmel 24C128/256 has	*/
+#undef CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 6	/* The Atmel 24C128/256 has	*/
 					/* 64 byte page write mode using*/
 					/* last	6 bits of the address	*/
-#define CFG_EEPROM_PAGE_WRITE_ENABLE	/* enable Page write */
-#define CFG_EEPROM_PAGE_WRITE_DELAY_MS	10	/* and takes up to 10 msec */
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	10	/* and takes up to 10 msec */
 
 
 /***************************************************************
@@ -135,54 +134,54 @@
 /***************************************************************
  * defines if the console is stored in the environment
  ***************************************************************/
-#define CFG_CONSOLE_IS_IN_ENV	/* stdin, stdout and stderr are in evironment */
+#define CONFIG_SYS_CONSOLE_IS_IN_ENV	/* stdin, stdout and stderr are in evironment */
 /***************************************************************
  * defines if an overwrite_console function exists
  *************************************************************/
-#define CFG_CONSOLE_OVERWRITE_ROUTINE
-#define CFG_CONSOLE_INFO_QUIET
+#define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
+#define CONFIG_SYS_CONSOLE_INFO_QUIET
 /***************************************************************
  * defines if the overwrite_console should be stored in the
  * environment
  **************************************************************/
-#undef CFG_CONSOLE_ENV_OVERWRITE
+#undef CONFIG_SYS_CONSOLE_ENV_OVERWRITE
 
 /**************************************************************
  * loads config
  *************************************************************/
 #define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
-#define CFG_LOADS_BAUD_CHANGE	1	/* allow baudrate change	*/
+#define CONFIG_SYS_LOADS_BAUD_CHANGE	1	/* allow baudrate change	*/
 
 #define CONFIG_MISC_INIT_R
 /***********************************************************
  * Miscellaneous configurable options
  **********************************************************/
-#define CFG_LONGHELP			/* undef to save memory		*/
-#define CFG_PROMPT	"=> "		/* Monitor Command Prompt	*/
+#define CONFIG_SYS_LONGHELP			/* undef to save memory		*/
+#define CONFIG_SYS_PROMPT	"=> "		/* Monitor Command Prompt	*/
 #if defined(CONFIG_CMD_KGDB)
-#define CFG_CBSIZE	1024		/* Console I/O Buffer Size	*/
+#define CONFIG_SYS_CBSIZE	1024		/* Console I/O Buffer Size	*/
 #else
-#define CFG_CBSIZE	256		/* Console I/O Buffer Size	*/
+#define CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size	*/
 #endif
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define CFG_MAXARGS	16		/* max number of command args	*/
-#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS	16		/* max number of command args	*/
+#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
 
-#define CFG_MEMTEST_START	0x0100000	/* memtest works on	*/
-#define CFG_MEMTEST_END		0x0C00000	/* 1 ... 12 MB in DRAM	*/
+#define CONFIG_SYS_MEMTEST_START	0x0100000	/* memtest works on	*/
+#define CONFIG_SYS_MEMTEST_END		0x0C00000	/* 1 ... 12 MB in DRAM	*/
 
-#undef	CFG_EXT_SERIAL_CLOCK	       /* no external serial clock used */
-#define CFG_BASE_BAUD       691200
+#undef	CONFIG_SYS_EXT_SERIAL_CLOCK	       /* no external serial clock used */
+#define CONFIG_SYS_BASE_BAUD       691200
 
 /* The following table includes the supported baudrates */
-#define CFG_BAUDRATE_TABLE	\
+#define CONFIG_SYS_BAUDRATE_TABLE	\
 	{ 300, 600, 1200, 2400, 4800, 9600, 19200, 38400,     \
 	 57600, 115200, 230400, 460800, 921600 }
 
-#define CFG_LOAD_ADDR		0x400000	/* default load address */
-#define CFG_EXTBDINFO		1	/* To use extended board_into (bd_t) */
+#define CONFIG_SYS_LOAD_ADDR		0x400000	/* default load address */
+#define CONFIG_SYS_EXTBDINFO		1	/* To use extended board_into (bd_t) */
 
-#define CFG_HZ		1000		/* decrementer freq: 1 ms ticks */
+#define CONFIG_SYS_HZ		1000		/* decrementer freq: 1 ms ticks */
 
 /*-----------------------------------------------------------------------
  * PCI stuff
@@ -196,40 +195,40 @@
 #define CONFIG_PCI_HOST PCI_HOST_FORCE	/* configure as pci-host	*/
 #define CONFIG_PCI_PNP			/* pci plug-and-play		*/
 					/* resource configuration	*/
-#define CFG_PCI_SUBSYS_VENDORID 0x0000	/* PCI Vendor ID: to-do!!!	*/
-#define CFG_PCI_SUBSYS_DEVICEID 0x0000	/* PCI Device ID: to-do!!!	*/
-#define CFG_PCI_PTM1LA	0x00000000	/* point to sdram		*/
-#define CFG_PCI_PTM1MS	0x80000001	/* 2GB, enable hard-wired to 1	*/
-#define CFG_PCI_PTM1PCI 0x00000000      /* Host: use this pci address   */
-#define CFG_PCI_PTM2LA	0x00000000	/* disabled			*/
-#define CFG_PCI_PTM2MS	0x00000000	/* disabled			*/
-#define CFG_PCI_PTM2PCI 0x00000000      /* Host: use this pci address   */
+#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x0000	/* PCI Vendor ID: to-do!!!	*/
+#define CONFIG_SYS_PCI_SUBSYS_DEVICEID 0x0000	/* PCI Device ID: to-do!!!	*/
+#define CONFIG_SYS_PCI_PTM1LA	0x00000000	/* point to sdram		*/
+#define CONFIG_SYS_PCI_PTM1MS	0x80000001	/* 2GB, enable hard-wired to 1	*/
+#define CONFIG_SYS_PCI_PTM1PCI 0x00000000      /* Host: use this pci address   */
+#define CONFIG_SYS_PCI_PTM2LA	0x00000000	/* disabled			*/
+#define CONFIG_SYS_PCI_PTM2MS	0x00000000	/* disabled			*/
+#define CONFIG_SYS_PCI_PTM2PCI 0x00000000      /* Host: use this pci address   */
 
 /*-----------------------------------------------------------------------
  * Start addresses for the final memory configuration
  * (Set up by the startup code)
- * Please note that CFG_SDRAM_BASE _must_ start at 0
+ * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
  */
-#define CFG_SDRAM_BASE		0x00000000
-#define CFG_FLASH_BASE		0xFFF80000
-#define CFG_MONITOR_BASE	CFG_FLASH_BASE
-#define CFG_MONITOR_LEN		(512 * 1024)	/* Reserve 512 kB for Monitor	*/
-#define CFG_MALLOC_LEN		(1024 * 1024)	/* Reserve 1024 kB for malloc()	*/
+#define CONFIG_SYS_SDRAM_BASE		0x00000000
+#define CONFIG_SYS_FLASH_BASE		0xFFF80000
+#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_FLASH_BASE
+#define CONFIG_SYS_MONITOR_LEN		(512 * 1024)	/* Reserve 512 kB for Monitor	*/
+#define CONFIG_SYS_MALLOC_LEN		(1024 * 1024)	/* Reserve 1024 kB for malloc()	*/
 
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
+#define CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
 /*-----------------------------------------------------------------------
  * FLASH organization
  */
-#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
-#define CFG_MAX_FLASH_SECT	256	/* max number of sectors on one chip	*/
+#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
+#define CONFIG_SYS_MAX_FLASH_SECT	256	/* max number of sectors on one chip	*/
 
-#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
-#define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
+#define CONFIG_SYS_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
+#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
 
 /*
  * Init Memory Controller:
@@ -249,14 +248,14 @@
 /*-----------------------------------------------------------------------
  * Definitions for initial stack pointer and data area (in On Chip SRAM)
  */
-#define CFG_TEMP_STACK_OCM	1
-#define CFG_OCM_DATA_ADDR	0xF0000000
-#define CFG_OCM_DATA_SIZE	0x1000
-#define CFG_INIT_RAM_ADDR	CFG_OCM_DATA_ADDR	/* inside of On Chip SRAM    */
-#define CFG_INIT_RAM_END	CFG_OCM_DATA_SIZE	/* End of On Chip SRAM	       */
-#define CFG_GBL_DATA_SIZE	64		/* size in bytes reserved for initial data */
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_TEMP_STACK_OCM	1
+#define CONFIG_SYS_OCM_DATA_ADDR	0xF0000000
+#define CONFIG_SYS_OCM_DATA_SIZE	0x1000
+#define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_OCM_DATA_ADDR	/* inside of On Chip SRAM    */
+#define CONFIG_SYS_INIT_RAM_END	CONFIG_SYS_OCM_DATA_SIZE	/* End of On Chip SRAM	       */
+#define CONFIG_SYS_GBL_DATA_SIZE	64		/* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
 /*
  * Internal Definitions
@@ -270,7 +269,7 @@
 /***********************************************************************
  * External peripheral base address
  ***********************************************************************/
-#define CFG_ISA_IO_BASE_ADDRESS 0xE8000000
+#define CONFIG_SYS_ISA_IO_BASE_ADDRESS 0xE8000000
 
 /***********************************************************************
  * Last Stage Init
@@ -279,9 +278,9 @@
 /************************************************************
  * Ethernet Stuff
  ***********************************************************/
+#define CONFIG_PPC4xx_EMAC
 #define CONFIG_MII		1	/* MII PHY management		*/
 #define CONFIG_PHY_ADDR		1	/* PHY address			*/
-#define CONFIG_CS8952_PHY	1	/* its a CS8952 PHY		*/
 /************************************************************
  * RTC
  ***********************************************************/
@@ -291,15 +290,15 @@
 /************************************************************
  * IDE/ATA stuff
  ************************************************************/
-#define CFG_IDE_MAXBUS		2   /* max. 2 IDE busses	*/
-#define CFG_IDE_MAXDEVICE	(CFG_IDE_MAXBUS*2) /* max. 2 drives per IDE bus */
+#define CONFIG_SYS_IDE_MAXBUS		2   /* max. 2 IDE busses	*/
+#define CONFIG_SYS_IDE_MAXDEVICE	(CONFIG_SYS_IDE_MAXBUS*2) /* max. 2 drives per IDE bus */
 
-#define CFG_ATA_BASE_ADDR	CFG_ISA_IO_BASE_ADDRESS /* base address */
-#define CFG_ATA_IDE0_OFFSET	0x01F0	/* ide0 offste */
-#define CFG_ATA_IDE1_OFFSET	0x0170	/* ide1 offset */
-#define CFG_ATA_DATA_OFFSET	0	/* data reg offset	*/
-#define CFG_ATA_REG_OFFSET	0	/* reg offset */
-#define CFG_ATA_ALT_OFFSET	0x200	/* alternate register offset */
+#define CONFIG_SYS_ATA_BASE_ADDR	CONFIG_SYS_ISA_IO_BASE_ADDRESS /* base address */
+#define CONFIG_SYS_ATA_IDE0_OFFSET	0x01F0	/* ide0 offste */
+#define CONFIG_SYS_ATA_IDE1_OFFSET	0x0170	/* ide1 offset */
+#define CONFIG_SYS_ATA_DATA_OFFSET	0	/* data reg offset	*/
+#define CONFIG_SYS_ATA_REG_OFFSET	0	/* reg offset */
+#define CONFIG_SYS_ATA_ALT_OFFSET	0x200	/* alternate register offset */
 
 #undef	CONFIG_IDE_8xx_DIRECT		/* no pcmcia interface required */
 #undef	CONFIG_IDE_LED			/* no led for ide supported	*/
@@ -316,18 +315,18 @@
  * SCSI support (experimental) only SYM53C8xx supported
  ************************************************************/
 #define CONFIG_SCSI_SYM53C8XX
-#define CFG_SCSI_MAX_LUN	8	/* number of supported LUNs */
-#define CFG_SCSI_MAX_SCSI_ID	7	/* maximum SCSI ID (0..6) */
-#define CFG_SCSI_MAX_DEVICE	CFG_SCSI_MAX_SCSI_ID * CFG_SCSI_MAX_LUN /* maximum Target devices */
-#define CFG_SCSI_SPIN_UP_TIME	2
+#define CONFIG_SYS_SCSI_MAX_LUN	8	/* number of supported LUNs */
+#define CONFIG_SYS_SCSI_MAX_SCSI_ID	7	/* maximum SCSI ID (0..6) */
+#define CONFIG_SYS_SCSI_MAX_DEVICE	CONFIG_SYS_SCSI_MAX_SCSI_ID * CONFIG_SYS_SCSI_MAX_LUN /* maximum Target devices */
+#define CONFIG_SYS_SCSI_SPIN_UP_TIME	2
 
 /************************************************************
  * Disk-On-Chip configuration
  ************************************************************/
-#define CFG_MAX_DOC_DEVICE	1	/* Max number of DOC devices		*/
-#define CFG_DOC_SHORT_TIMEOUT
-#define CFG_DOC_SUPPORT_2000
-#define CFG_DOC_SUPPORT_MILLENNIUM
+#define CONFIG_SYS_MAX_DOC_DEVICE	1	/* Max number of DOC devices		*/
+#define CONFIG_SYS_DOC_SHORT_TIMEOUT
+#define CONFIG_SYS_DOC_SUPPORT_2000
+#define CONFIG_SYS_DOC_SUPPORT_MILLENNIUM
 
 /************************************************************
  * DISK Partition support
@@ -361,7 +360,7 @@
 #define CONFIG_USB_STORAGE
 
 /* Enable needed helper functions */
-#define CFG_DEVICE_DEREGISTER		/* needs device_deregister */
+#define CONFIG_SYS_DEVICE_DEREGISTER		/* needs device_deregister */
 
 /************************************************************
  * Debug support
diff --git a/include/configs/PK1C20.h b/include/configs/PK1C20.h
index d90351add..5b1fcff9c 100644
--- a/include/configs/PK1C20.h
+++ b/include/configs/PK1C20.h
@@ -30,29 +30,29 @@
 #define CONFIG_PK1C20		1		/* PK1C20 board		*/
 #define CONFIG_SYS_CLK_FREQ	50000000	/* 50 MHz core clk	*/
 
-#define CFG_RESET_ADDR		0x00000000	/* Hard-reset address	*/
-#define CFG_EXCEPTION_ADDR	0x01000020	/* Exception entry point*/
-#define CFG_NIOS_SYSID_BASE	0x021208b8	/* System id address	*/
+#define CONFIG_SYS_RESET_ADDR		0x00000000	/* Hard-reset address	*/
+#define CONFIG_SYS_EXCEPTION_ADDR	0x01000020	/* Exception entry point*/
+#define CONFIG_SYS_NIOS_SYSID_BASE	0x021208b8	/* System id address	*/
 #define CONFIG_BOARD_EARLY_INIT_F 1	/* enable early board-spec. init*/
 
 /*------------------------------------------------------------------------
  * CACHE -- the following will support II/s and II/f. The II/s does not
  * have dcache, so the cache instructions will behave as NOPs.
  *----------------------------------------------------------------------*/
-#define CFG_ICACHE_SIZE		4096		/* 4 KByte total	*/
-#define CFG_ICACHELINE_SIZE	32		/* 32 bytes/line	*/
-#define CFG_DCACHE_SIZE		2048		/* 2 KByte (II/f)	*/
-#define CFG_DCACHELINE_SIZE	4		/* 4 bytes/line (II/f)	*/
+#define CONFIG_SYS_ICACHE_SIZE		4096		/* 4 KByte total	*/
+#define CONFIG_SYS_ICACHELINE_SIZE	32		/* 32 bytes/line	*/
+#define CONFIG_SYS_DCACHE_SIZE		2048		/* 2 KByte (II/f)	*/
+#define CONFIG_SYS_DCACHELINE_SIZE	4		/* 4 bytes/line (II/f)	*/
 
 /*------------------------------------------------------------------------
  * MEMORY BASE ADDRESSES
  *----------------------------------------------------------------------*/
-#define CFG_FLASH_BASE		0x00000000	/* FLASH base addr	*/
-#define CFG_FLASH_SIZE		0x00800000	/* 8 MByte		*/
-#define CFG_SDRAM_BASE		0x01000000	/* SDRAM base addr	*/
-#define CFG_SDRAM_SIZE		0x01000000	/* 16 MByte		*/
-#define CFG_SRAM_BASE		0x02000000	/* SRAM base addr	*/
-#define CFG_SRAM_SIZE		0x00100000	/* 1 MB (only 1M mapped)*/
+#define CONFIG_SYS_FLASH_BASE		0x00000000	/* FLASH base addr	*/
+#define CONFIG_SYS_FLASH_SIZE		0x00800000	/* 8 MByte		*/
+#define CONFIG_SYS_SDRAM_BASE		0x01000000	/* SDRAM base addr	*/
+#define CONFIG_SYS_SDRAM_SIZE		0x01000000	/* 16 MByte		*/
+#define CONFIG_SYS_SRAM_BASE		0x02000000	/* SRAM base addr	*/
+#define CONFIG_SYS_SRAM_SIZE		0x00100000	/* 1 MB (only 1M mapped)*/
 
 /*------------------------------------------------------------------------
  * MEMORY ORGANIZATION
@@ -61,58 +61,58 @@
  *	-Global data is placed below the heap.
  *	-The stack is placed below global data (&grows down).
  *----------------------------------------------------------------------*/
-#define CFG_MONITOR_LEN		(256 * 1024)	/* Reserve 128k		*/
-#define CFG_GBL_DATA_SIZE	128		/* Global data size rsvd*/
-#define CFG_MALLOC_LEN		(CFG_ENV_SIZE + 128*1024)
+#define CONFIG_SYS_MONITOR_LEN		(256 * 1024)	/* Reserve 128k		*/
+#define CONFIG_SYS_GBL_DATA_SIZE	128		/* Global data size rsvd*/
+#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + 128*1024)
 
-#define CFG_MONITOR_BASE	TEXT_BASE
-#define CFG_MALLOC_BASE		(CFG_MONITOR_BASE - CFG_MALLOC_LEN)
-#define CFG_GBL_DATA_OFFSET	(CFG_MALLOC_BASE - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP		CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_MONITOR_BASE	TEXT_BASE
+#define CONFIG_SYS_MALLOC_BASE		(CONFIG_SYS_MONITOR_BASE - CONFIG_SYS_MALLOC_LEN)
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_MALLOC_BASE - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP		CONFIG_SYS_GBL_DATA_OFFSET
 
 /*------------------------------------------------------------------------
  * FLASH (AM29LV065D)
  *----------------------------------------------------------------------*/
-#define CFG_MAX_FLASH_SECT	128		/* Max # sects per bank */
-#define CFG_MAX_FLASH_BANKS	1		/* Max # of flash banks */
-#define CFG_FLASH_ERASE_TOUT	8000		/* Erase timeout (msec) */
-#define CFG_FLASH_WRITE_TOUT	100		/* Write timeout (msec) */
-#define CFG_FLASH_WORD_SIZE	unsigned char	/* flash word size	*/
+#define CONFIG_SYS_MAX_FLASH_SECT	128		/* Max # sects per bank */
+#define CONFIG_SYS_MAX_FLASH_BANKS	1		/* Max # of flash banks */
+#define CONFIG_SYS_FLASH_ERASE_TOUT	8000		/* Erase timeout (msec) */
+#define CONFIG_SYS_FLASH_WRITE_TOUT	100		/* Write timeout (msec) */
+#define CONFIG_SYS_FLASH_WORD_SIZE	unsigned char	/* flash word size	*/
 
 /*------------------------------------------------------------------------
- * ENVIRONMENT -- Put environment in sector CFG_MONITOR_LEN above
- * CFG_RESET_ADDR, since we assume the monitor is stored at the
+ * ENVIRONMENT -- Put environment in sector CONFIG_SYS_MONITOR_LEN above
+ * CONFIG_SYS_RESET_ADDR, since we assume the monitor is stored at the
  * reset address, no? This will keep the environment in user region
  * of flash. NOTE: the monitor length must be multiple of sector size
  * (which is common practice).
  *----------------------------------------------------------------------*/
-#define CFG_ENV_IS_IN_FLASH	1		/* Environment in flash */
-#define CFG_ENV_SIZE		(64 * 1024)	/* 64 KByte (1 sector)	*/
+#define CONFIG_ENV_IS_IN_FLASH	1		/* Environment in flash */
+#define CONFIG_ENV_SIZE		(64 * 1024)	/* 64 KByte (1 sector)	*/
 #define CONFIG_ENV_OVERWRITE			/* Serial change Ok	*/
-#define CFG_ENV_ADDR	(CFG_RESET_ADDR + CFG_MONITOR_LEN)
+#define CONFIG_ENV_ADDR	(CONFIG_SYS_RESET_ADDR + CONFIG_SYS_MONITOR_LEN)
 
 /*------------------------------------------------------------------------
  * CONSOLE
  *----------------------------------------------------------------------*/
 #if defined(CONFIG_CONSOLE_JTAG)
-#define CFG_NIOS_CONSOLE	0x021208b0	/* JTAG UART base addr	*/
+#define CONFIG_SYS_NIOS_CONSOLE	0x021208b0	/* JTAG UART base addr	*/
 #else
-#define CFG_NIOS_CONSOLE	0x02120840	/* UART base addr	*/
+#define CONFIG_SYS_NIOS_CONSOLE	0x02120840	/* UART base addr	*/
 #endif
 
-#define CFG_NIOS_FIXEDBAUD	1		/* Baudrate is fixed	*/
+#define CONFIG_SYS_NIOS_FIXEDBAUD	1		/* Baudrate is fixed	*/
 #define CONFIG_BAUDRATE		115200		/* Initial baudrate	*/
-#define CFG_BAUDRATE_TABLE	{115200}	/* It's fixed ;-)	*/
+#define CONFIG_SYS_BAUDRATE_TABLE	{115200}	/* It's fixed ;-)	*/
 
-#define CFG_CONSOLE_INFO_QUIET	1		/* Suppress console info*/
+#define CONFIG_SYS_CONSOLE_INFO_QUIET	1		/* Suppress console info*/
 
 /*------------------------------------------------------------------------
- * EPCS Device -- wne CFG_NIOS_EPCSBASE is defined code/commands for
+ * EPCS Device -- wne CONFIG_SYS_NIOS_EPCSBASE is defined code/commands for
  * epcs device access is enabled. The base address is the epcs
  * _register_ base address, NOT THE ADDRESS OF THE MEMORY BLOCK.
  * The register base is currently at offset 0x600 from the memory base.
  *----------------------------------------------------------------------*/
-#define CFG_NIOS_EPCSBASE	0x02100200	/* EPCS register base	*/
+#define CONFIG_SYS_NIOS_EPCSBASE	0x02100200	/* EPCS register base	*/
 
 /*------------------------------------------------------------------------
  * DEBUG
@@ -126,23 +126,23 @@
  * registers, we can slow it down to 10 msec using TMRCNT. If the default
  * period is acceptable, TMRCNT can be left undefined.
  *----------------------------------------------------------------------*/
-#define CFG_NIOS_TMRBASE	0x02120820	/* Tick timer base addr */
-#define CFG_NIOS_TMRIRQ		3		/* Timer IRQ num	*/
-#define CFG_NIOS_TMRMS		10		/* 10 msec per tick	*/
-#define CFG_NIOS_TMRCNT (CFG_NIOS_TMRMS * (CONFIG_SYS_CLK_FREQ/1000))
-#define CFG_HZ		(CONFIG_SYS_CLK_FREQ/(CFG_NIOS_TMRCNT + 1))
+#define CONFIG_SYS_NIOS_TMRBASE	0x02120820	/* Tick timer base addr */
+#define CONFIG_SYS_NIOS_TMRIRQ		3		/* Timer IRQ num	*/
+#define CONFIG_SYS_NIOS_TMRMS		10		/* 10 msec per tick	*/
+#define CONFIG_SYS_NIOS_TMRCNT (CONFIG_SYS_NIOS_TMRMS * (CONFIG_SYS_CLK_FREQ/1000))
+#define CONFIG_SYS_HZ		(CONFIG_SYS_CLK_FREQ/(CONFIG_SYS_NIOS_TMRCNT + 1))
 
 /*------------------------------------------------------------------------
  * STATUS LED -- Provides a simple blinking led. For Nios2 each board
  * must implement its own led routines -- leds are, after all,
  * board-specific, no?
  *----------------------------------------------------------------------*/
-#define CFG_LEDPIO_ADDR		0x02120870	/* LED PIO base addr	*/
+#define CONFIG_SYS_LEDPIO_ADDR		0x02120870	/* LED PIO base addr	*/
 #define CONFIG_STATUS_LED			/* Enable status driver */
 
 #define STATUS_LED_BIT		1		/* Bit-0 on PIO		*/
 #define STATUS_LED_STATE	1		/* Blinking		*/
-#define STATUS_LED_PERIOD	(500/CFG_NIOS_TMRMS) /* Every 500 msec	*/
+#define STATUS_LED_PERIOD	(500/CONFIG_SYS_NIOS_TMRMS) /* Every 500 msec	*/
 
 /*------------------------------------------------------------------------
  * ETHERNET -- The header file for the SMC91111 driver hurts my eyes ...
@@ -196,21 +196,21 @@
  *----------------------------------------------------------------------*/
 #if defined(CONFIG_CMD_IDE)
 #define CONFIG_IDE_PREINIT			/* Implement id_preinit	*/
-#define CFG_IDE_MAXBUS		1		/* 1 IDE bus		*/
-#define CFG_IDE_MAXDEVICE	1		/* 1 drive per IDE bus	*/
-
-#define CFG_ATA_BASE_ADDR	0x00900800	/* ATA base addr	*/
-#define CFG_ATA_IDE0_OFFSET	0x0000		/* IDE0 offset		*/
-#define CFG_ATA_DATA_OFFSET	0x0040		/* Data IO offset	*/
-#define CFG_ATA_REG_OFFSET	0x0040		/* Register offset	*/
-#define CFG_ATA_ALT_OFFSET	0x0100		/* Alternate reg offset	*/
-#define CFG_ATA_STRIDE          4		/* Width betwix addrs	*/
+#define CONFIG_SYS_IDE_MAXBUS		1		/* 1 IDE bus		*/
+#define CONFIG_SYS_IDE_MAXDEVICE	1		/* 1 drive per IDE bus	*/
+
+#define CONFIG_SYS_ATA_BASE_ADDR	0x00900800	/* ATA base addr	*/
+#define CONFIG_SYS_ATA_IDE0_OFFSET	0x0000		/* IDE0 offset		*/
+#define CONFIG_SYS_ATA_DATA_OFFSET	0x0040		/* Data IO offset	*/
+#define CONFIG_SYS_ATA_REG_OFFSET	0x0040		/* Register offset	*/
+#define CONFIG_SYS_ATA_ALT_OFFSET	0x0100		/* Alternate reg offset	*/
+#define CONFIG_SYS_ATA_STRIDE          4		/* Width betwix addrs	*/
 #define CONFIG_DOS_PARTITION
 
 /* Board-specific cf regs */
-#define CFG_CF_PRESENT		0x00900880	/* CF Present PIO base	*/
-#define CFG_CF_POWER		0x00900890	/* CF Power FET PIO base*/
-#define CFG_CF_ATASEL		0x009008a0	/* CF ATASEL PIO base	*/
+#define CONFIG_SYS_CF_PRESENT		0x00900880	/* CF Present PIO base	*/
+#define CONFIG_SYS_CF_POWER		0x00900890	/* CF Power FET PIO base*/
+#define CONFIG_SYS_CF_ATASEL		0x009008a0	/* CF ATASEL PIO base	*/
 
 #endif
 
@@ -218,23 +218,23 @@
  * JFFS2
  *----------------------------------------------------------------------*/
 #if defined(CONFIG_CMD_JFFS2)
-#define CFG_JFFS_CUSTOM_PART			/* board defined part	*/
+#define CONFIG_SYS_JFFS_CUSTOM_PART			/* board defined part	*/
 #endif
 
 /*------------------------------------------------------------------------
  * MISC
  *----------------------------------------------------------------------*/
-#define CFG_LONGHELP				/* Provide extended help*/
-#define CFG_PROMPT		"==> "		/* Command prompt	*/
-#define CFG_CBSIZE		256		/* Console I/O buf size */
-#define CFG_MAXARGS		16		/* Max command args	*/
-#define CFG_BARGSIZE		CFG_CBSIZE	/* Boot arg buf size	*/
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print buf size */
-#define CFG_LOAD_ADDR		CFG_SDRAM_BASE	/* Default load address */
-#define CFG_MEMTEST_START	CFG_SDRAM_BASE	/* Start addr for test	*/
-#define CFG_MEMTEST_END		CFG_INIT_SP - 0x00020000
-
-#define CFG_HUSH_PARSER
-#define CFG_PROMPT_HUSH_PS2	"> "
+#define CONFIG_SYS_LONGHELP				/* Provide extended help*/
+#define CONFIG_SYS_PROMPT		"==> "		/* Command prompt	*/
+#define CONFIG_SYS_CBSIZE		256		/* Console I/O buf size */
+#define CONFIG_SYS_MAXARGS		16		/* Max command args	*/
+#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot arg buf size	*/
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print buf size */
+#define CONFIG_SYS_LOAD_ADDR		CONFIG_SYS_SDRAM_BASE	/* Default load address */
+#define CONFIG_SYS_MEMTEST_START	CONFIG_SYS_SDRAM_BASE	/* Start addr for test	*/
+#define CONFIG_SYS_MEMTEST_END		CONFIG_SYS_INIT_SP - 0x00020000
+
+#define CONFIG_SYS_HUSH_PARSER
+#define CONFIG_SYS_PROMPT_HUSH_PS2	"> "
 
 #endif	/* __CONFIG_H */
diff --git a/include/configs/PLU405.h b/include/configs/PLU405.h
index a3d1c56dc..11ce0080f 100644
--- a/include/configs/PLU405.h
+++ b/include/configs/PLU405.h
@@ -49,15 +49,16 @@
 
 #define CONFIG_PREBOOT                  /* enable preboot variable      */
 
-#define CFG_LOADS_BAUD_CHANGE	1	/* allow baudrate change	*/
+#define CONFIG_SYS_LOADS_BAUD_CHANGE	1	/* allow baudrate change	*/
 
 #define CONFIG_NET_MULTI	1
 #undef  CONFIG_HAS_ETH1
 
+#define CONFIG_PPC4xx_EMAC
 #define CONFIG_MII		1	/* MII PHY management		*/
 #define CONFIG_PHY_ADDR		0	/* PHY address			*/
 #define CONFIG_LXT971_NO_SLEEP  1       /* disable sleep mode in LXT971 */
-#define CONFIG_RESET_PHY_R      1       /* use reset_phy() to disable phy sleep mode */
+#define CONFIG_RESET_PHY_R      1       /* use reset_phy()              */
 
 #define CONFIG_PHY_CLK_FREQ	EMAC_STACR_CLK_66MHZ /* 66 MHz OPB clock*/
 
@@ -88,7 +89,10 @@
 #define CONFIG_CMD_MII
 #define CONFIG_CMD_PING
 #define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_USB
 
+#define CONFIG_OF_LIBFDT
+#define CONFIG_OF_BOARD_SETUP
 
 #define CONFIG_MAC_PARTITION
 #define CONFIG_DOS_PARTITION
@@ -100,54 +104,55 @@
 #undef	CONFIG_WATCHDOG			/* watchdog disabled		*/
 
 #define CONFIG_RTC_MC146818		/* DS1685 is MC146818 compatible*/
-#define CFG_RTC_REG_BASE_ADDR	 0xF0000500 /* RTC Base Address		*/
+#define CONFIG_SYS_RTC_REG_BASE_ADDR	 0xF0000500 /* RTC Base Address		*/
 
 #define CONFIG_SDRAM_BANK0	1	/* init onboard SDRAM bank 0	*/
 
 /*
  * Miscellaneous configurable options
  */
-#define CFG_LONGHELP			/* undef to save memory		*/
-#define CFG_PROMPT	"=> "		/* Monitor Command Prompt	*/
+#define CONFIG_SYS_LONGHELP			/* undef to save memory		*/
+#define CONFIG_SYS_PROMPT	"=> "		/* Monitor Command Prompt	*/
 
-#undef	CFG_HUSH_PARSER			/* use "hush" command parser	*/
-#ifdef	CFG_HUSH_PARSER
-#define CFG_PROMPT_HUSH_PS2	"> "
+#undef	CONFIG_SYS_HUSH_PARSER			/* use "hush" command parser	*/
+#ifdef	CONFIG_SYS_HUSH_PARSER
+#define CONFIG_SYS_PROMPT_HUSH_PS2	"> "
 #endif
 
 #if defined(CONFIG_CMD_KGDB)
-#define CFG_CBSIZE	1024		/* Console I/O Buffer Size	*/
+#define CONFIG_SYS_CBSIZE	1024		/* Console I/O Buffer Size	*/
 #else
-#define CFG_CBSIZE	256		/* Console I/O Buffer Size	*/
+#define CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size	*/
 #endif
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define CFG_MAXARGS	16		/* max number of command args	*/
-#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS	16		/* max number of command args	*/
+#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
 
-#define CFG_DEVICE_NULLDEV	1	/* include nulldev device	*/
+#define CONFIG_SYS_DEVICE_NULLDEV	1	/* include nulldev device	*/
 
-#define CFG_CONSOLE_INFO_QUIET	1	/* don't print console @ startup*/
+#define CONFIG_SYS_CONSOLE_INFO_QUIET	1	/* don't print console @ startup*/
 
 #define CONFIG_AUTO_COMPLETE	1       /* add autocompletion support   */
 
-#define CFG_MEMTEST_START	0x0400000	/* memtest works on	*/
-#define CFG_MEMTEST_END		0x0C00000	/* 4 ... 12 MB in DRAM	*/
+#define CONFIG_SYS_MEMTEST_START	0x0400000	/* memtest works on	*/
+#define CONFIG_SYS_MEMTEST_END		0x0C00000	/* 4 ... 12 MB in DRAM	*/
 
-#undef	CFG_EXT_SERIAL_CLOCK	       /* no external serial clock used */
-#define CFG_IGNORE_405_UART_ERRATA_59	/* ignore ppc405gp errata #59	*/
-#define CFG_BASE_BAUD	    691200
+#undef	CONFIG_SYS_EXT_SERIAL_CLOCK	       /* no external serial clock used */
+#define CONFIG_SYS_IGNORE_405_UART_ERRATA_59	/* ignore ppc405gp errata #59	*/
+#define CONFIG_SYS_BASE_BAUD	    691200
 #undef	CONFIG_UART1_CONSOLE		/* define for uart1 as console	*/
 
 /* The following table includes the supported baudrates */
-#define CFG_BAUDRATE_TABLE	\
+#define CONFIG_SYS_BAUDRATE_TABLE	\
 	{ 300, 600, 1200, 2400, 4800, 9600, 19200, 38400,     \
 	 57600, 115200, 230400, 460800, 921600 }
 
-#define CFG_LOAD_ADDR	0x100000	/* default load address */
-#define CFG_EXTBDINFO	1		/* To use extended board_into (bd_t) */
+#define CONFIG_SYS_LOAD_ADDR	0x100000	/* default load address */
+#define CONFIG_SYS_EXTBDINFO	1		/* To use extended board_into (bd_t) */
 
-#define CFG_HZ		1000		/* decrementer freq: 1 ms ticks */
+#define CONFIG_SYS_HZ		1000		/* decrementer freq: 1 ms ticks */
 
+#define CONFIG_CMDLINE_EDITING	1	/* add command line history	*/
 #define CONFIG_ZERO_BOOTDELAY_CHECK	/* check for keypress on bootdelay==0 */
 #define CONFIG_BOOTDELAY	3	/* autoboot after 3 seconds	*/
 
@@ -162,35 +167,33 @@
 
 #define CONFIG_VERSION_VARIABLE 1	/* include version env variable */
 
-#define CFG_RX_ETH_BUFFER	16	/* use 16 rx buffer on 405 emac */
+#define CONFIG_SYS_RX_ETH_BUFFER	16	/* use 16 rx buffer on 405 emac */
 
-/*-----------------------------------------------------------------------
+/*
  * NAND-FLASH stuff
- *-----------------------------------------------------------------------
  */
-#define CFG_NAND_BASE_LIST	{ CFG_NAND_BASE }
+#define CONFIG_SYS_NAND_BASE_LIST	{CONFIG_SYS_NAND_BASE}
 #define NAND_MAX_CHIPS          1
-#define CFG_MAX_NAND_DEVICE	1         /* Max number of NAND devices */
+#define CONFIG_SYS_MAX_NAND_DEVICE	1         /* Max number of NAND devices */
 #define NAND_BIG_DELAY_US	25
 
-#define CFG_NAND_CE             (0x80000000 >> 1)   /* our CE is GPIO1  */
-#define CFG_NAND_RDY            (0x80000000 >> 4)   /* our RDY is GPIO4 */
-#define CFG_NAND_CLE            (0x80000000 >> 2)   /* our CLE is GPIO2 */
-#define CFG_NAND_ALE            (0x80000000 >> 3)   /* our ALE is GPIO3 */
+#define CONFIG_SYS_NAND_CE             (0x80000000 >> 1)   /* our CE is GPIO1  */
+#define CONFIG_SYS_NAND_RDY            (0x80000000 >> 4)   /* our RDY is GPIO4 */
+#define CONFIG_SYS_NAND_CLE            (0x80000000 >> 2)   /* our CLE is GPIO2 */
+#define CONFIG_SYS_NAND_ALE            (0x80000000 >> 3)   /* our ALE is GPIO3 */
 
-#define CFG_NAND_SKIP_BAD_DOT_I 1       /* ".i" read skips bad blocks   */
-#define CFG_NAND_QUIET          1
+#define CONFIG_SYS_NAND_SKIP_BAD_DOT_I 1       /* ".i" read skips bad blocks   */
+#define CONFIG_SYS_NAND_QUIET          1
 
-/*-----------------------------------------------------------------------
+/*
  * PCI stuff
- *-----------------------------------------------------------------------
  */
 #define PCI_HOST_ADAPTER 0              /* configure as pci adapter     */
 #define PCI_HOST_FORCE  1               /* configure as pci host        */
 #define PCI_HOST_AUTO   2               /* detected via arbiter enable  */
 
 #define CONFIG_PCI			/* include pci support	        */
-#define CONFIG_PCI_HOST	PCI_HOST_HOST   /* select pci host function     */
+#define CONFIG_PCI_HOST	PCI_HOST_FORCE  /* select pci host function     */
 #define CONFIG_PCI_PNP			/* do pci plug-and-play         */
 					/* resource configuration       */
 
@@ -198,178 +201,175 @@
 
 #define CONFIG_PCI_CONFIG_HOST_BRIDGE 1 /* don't skip host bridge config*/
 
-#define CFG_PCI_SUBSYS_VENDORID 0x12FE  /* PCI Vendor ID: esd gmbh      */
-#define CFG_PCI_SUBSYS_DEVICEID 0x0405  /* PCI Device ID: CPCI-405      */
-#define CFG_PCI_CLASSCODE       0x0b20  /* PCI Class Code: Processor/PPC*/
-#define CFG_PCI_PTM1LA  0x00000000      /* point to sdram               */
-#define CFG_PCI_PTM1MS  0xf8000001      /* 128MB, enable hard-wired to 1 */
-#define CFG_PCI_PTM1PCI 0x00000000      /* Host: use this pci address   */
-#define CFG_PCI_PTM2LA  0xffc00000      /* point to flash               */
-#define CFG_PCI_PTM2MS  0xffc00001      /* 4MB, enable                  */
-#define CFG_PCI_PTM2PCI 0x04000000      /* Host: use this pci address   */
-
-/*-----------------------------------------------------------------------
+#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x12FE  /* PCI Vendor ID: esd gmbh      */
+#define CONFIG_SYS_PCI_SUBSYS_DEVICEID 0x0405  /* PCI Device ID: CPCI-405      */
+#define CONFIG_SYS_PCI_CLASSCODE       0x0b20  /* PCI Class Code: Processor/PPC*/
+#define CONFIG_SYS_PCI_PTM1LA  0x00000000      /* point to sdram               */
+#define CONFIG_SYS_PCI_PTM1MS  0xf8000001      /* 128MB, enable hard-wired to 1 */
+#define CONFIG_SYS_PCI_PTM1PCI 0x00000000      /* Host: use this pci address   */
+#define CONFIG_SYS_PCI_PTM2LA  0xffc00000      /* point to flash               */
+#define CONFIG_SYS_PCI_PTM2MS  0xffc00001      /* 4MB, enable                  */
+#define CONFIG_SYS_PCI_PTM2PCI 0x08000000      /* Host: use this pci address   */
+
+/*
  * IDE/ATA stuff
- *-----------------------------------------------------------------------
  */
 #undef	CONFIG_IDE_8xx_DIRECT		    /* no pcmcia interface required */
 #undef	CONFIG_IDE_LED			/* no led for ide supported	*/
 #define CONFIG_IDE_RESET	1	/* reset for ide supported	*/
 
-#define CFG_IDE_MAXBUS		1		/* max. 1 IDE busses	*/
-#define CFG_IDE_MAXDEVICE	(CFG_IDE_MAXBUS*1) /* max. 1 drives per IDE bus */
+#define CONFIG_SYS_IDE_MAXBUS		1		/* max. 1 IDE busses	*/
+/* max. 1 drives per IDE bus */
+#define CONFIG_SYS_IDE_MAXDEVICE	(CONFIG_SYS_IDE_MAXBUS*1)
 
-#define CFG_ATA_BASE_ADDR	0xF0100000
-#define CFG_ATA_IDE0_OFFSET	0x0000
+#define CONFIG_SYS_ATA_BASE_ADDR	0xF0100000
+#define CONFIG_SYS_ATA_IDE0_OFFSET	0x0000
 
-#define CFG_ATA_DATA_OFFSET	0x0000	/* Offset for data I/O			*/
-#define CFG_ATA_REG_OFFSET	0x0000	/* Offset for normal register accesses	*/
-#define CFG_ATA_ALT_OFFSET	0x0000	/* Offset for alternate registers	*/
+#define CONFIG_SYS_ATA_DATA_OFFSET	0x0000	/* Offset for data I/O */
+#define CONFIG_SYS_ATA_REG_OFFSET	0x0000	/* Offset for normal register access */
+#define CONFIG_SYS_ATA_ALT_OFFSET	0x0000	/* Offset for alternate registers */
 
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
-/*-----------------------------------------------------------------------
+#define CONFIG_SYS_BOOTMAPSZ		(8 << 20) /* Initial Memory map for Linux */
+
+/*
  * FLASH organization
  */
-#define FLASH_BASE0_PRELIM	0xFFC00000	/* FLASH bank #0	*/
+#define FLASH_BASE0_PRELIM	0xFFC00000 /* FLASH bank #0 */
 
-#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
-#define CFG_MAX_FLASH_SECT	256	/* max number of sectors on one chip	*/
+#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks */
+#define CONFIG_SYS_MAX_FLASH_SECT	256	/* max number of sectors on one chip */
 
-#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
-#define CFG_FLASH_WRITE_TOUT	1000	/* Timeout for Flash Write (in ms)	*/
+#define CONFIG_SYS_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms) */
+#define CONFIG_SYS_FLASH_WRITE_TOUT	1000	/* Timeout for Flash Write (in ms) */
 
-#define CFG_FLASH_WORD_SIZE	unsigned short	/* flash word size (width)	*/
-#define CFG_FLASH_ADDR0		0x5555	/* 1st address for flash config cycles	*/
-#define CFG_FLASH_ADDR1		0x2AAA	/* 2nd address for flash config cycles	*/
+#define CONFIG_SYS_FLASH_WORD_SIZE	unsigned short	/* flash word size (width) */
+#define CONFIG_SYS_FLASH_ADDR0		0x5555	/* 1st addr for flash config cycles */
+#define CONFIG_SYS_FLASH_ADDR1		0x2AAA	/* 2nd addr for flash config cycles */
 /*
  * The following defines are added for buggy IOP480 byte interface.
  * All other boards should use the standard values (CPCI405 etc.)
  */
-#define CFG_FLASH_READ0		0x0000	/* 0 is standard			*/
-#define CFG_FLASH_READ1		0x0001	/* 1 is standard			*/
-#define CFG_FLASH_READ2		0x0002	/* 2 is standard			*/
+#define CONFIG_SYS_FLASH_READ0		0x0000	/* 0 is standard */
+#define CONFIG_SYS_FLASH_READ1		0x0001	/* 1 is standard */
+#define CONFIG_SYS_FLASH_READ2		0x0002	/* 2 is standard */
 
-#define CFG_FLASH_EMPTY_INFO		/* print 'E' for empty sector on flinfo */
+#define CONFIG_SYS_FLASH_EMPTY_INFO		/* print 'E' for empty sector */
 
-/*-----------------------------------------------------------------------
+/*
  * Start addresses for the final memory configuration
  * (Set up by the startup code)
- * Please note that CFG_SDRAM_BASE _must_ start at 0
+ * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
  */
-#define CFG_SDRAM_BASE		0x00000000
-#define CFG_FLASH_BASE		0xFFFC0000
-#define CFG_MONITOR_BASE	TEXT_BASE
-#define CFG_MONITOR_LEN		(256 * 1024)	/* Reserve 256 kB for Monitor	*/
-#define CFG_MALLOC_LEN		(256 * 1024)	/* Reserve 256 kB for malloc()	*/
-
-#if (CFG_MONITOR_BASE < FLASH_BASE0_PRELIM)
-# define CFG_RAMBOOT		1
-#else
-# undef CFG_RAMBOOT
-#endif
+#define CONFIG_SYS_SDRAM_BASE		0x00000000
+#define CONFIG_SYS_FLASH_BASE		0xFFFA0000
+#define CONFIG_SYS_MONITOR_BASE	TEXT_BASE
+#define CONFIG_SYS_MONITOR_LEN		(384 * 1024)	/* Reserve 384kB for Monitor */
+#define CONFIG_SYS_MALLOC_LEN		(384 * 1024)	/* Reserve 384kB for malloc() */
 
-/*-----------------------------------------------------------------------
+/*
  * Environment Variable setup
  */
-#define CFG_ENV_IS_IN_EEPROM	1	/* use EEPROM for environment vars */
-#define CFG_ENV_OFFSET		0x100	/* environment starts at the beginning of the EEPROM */
-#define CFG_ENV_SIZE		0x700	/* 2048 bytes may be used for env vars*/
-				   /* total size of a CAT24WC16 is 2048 bytes */
+#define CONFIG_ENV_IS_IN_EEPROM	1	/* use EEPROM for environment vars */
+#define CONFIG_ENV_OFFSET		0x100	/* reseve 0x100 bytes for strapping */
+#define CONFIG_ENV_SIZE		0x700
 
-/*-----------------------------------------------------------------------
- * I2C EEPROM (CAT24WC16) for environment
+/*
+ * I2C EEPROM (24WC16) for environment
  */
 #define CONFIG_HARD_I2C			/* I2c with hardware support */
-#define CFG_I2C_SPEED		400000	/* I2C speed and slave address */
-#define CFG_I2C_SLAVE		0x7F
-
-#define CFG_I2C_EEPROM_ADDR	0x50	/* EEPROM CAT24WC08		*/
-#define CFG_EEPROM_WREN         1
-
-/* CAT24WC08/16... */
-#define CFG_I2C_EEPROM_ADDR_LEN 1	/* Bytes of address		*/
-/* mask of address bits that overflow into the "EEPROM chip address"	*/
-#define CFG_I2C_EEPROM_ADDR_OVERFLOW	0x07
-#define CFG_EEPROM_PAGE_WRITE_BITS 4	/* The Catalyst CAT24WC08 has	*/
-					/* 16 byte page write mode using*/
-					/* last 4 bits of the address	*/
-#define CFG_EEPROM_PAGE_WRITE_DELAY_MS	10   /* and takes up to 10 msec */
-#define CFG_EEPROM_PAGE_WRITE_ENABLE
-
-/*-----------------------------------------------------------------------
- * External Bus Controller (EBC) Setup
- */
-
-#define CAN_BA		0xF0000000	    /* CAN Base Address			*/
-#define DUART0_BA	0xF0000400	    /* DUART Base Address		*/
-#define DUART1_BA	0xF0000408	    /* DUART Base Address		*/
-#define RTC_BA		0xF0000500	    /* RTC Base Address			*/
-#define VGA_BA		0xF1000000	    /* Epson VGA Base Address		*/
-#define CFG_NAND_BASE	0xF4000000	    /* NAND FLASH Base Address		*/
-
-/* Memory Bank 0 (Flash Bank 0, NOR-FLASH) initialization			*/
-#define CFG_EBC_PB0AP		0x92015480
-/*#define CFG_EBC_PB0AP		  0x08055880  /XXX* TWT=16,CSN=1,OEN=1,WBN=1,WBF=1,TH=4,SOR=1 */
-#define CFG_EBC_PB0CR		0xFFC5A000  /* BAS=0xFFC,BS=4MB,BU=R/W,BW=16bit */
+#define CONFIG_SYS_I2C_SPEED		400000	/* I2C speed and slave address */
+#define CONFIG_SYS_I2C_SLAVE		0x7F
 
-/* Memory Bank 1 (Flash Bank 1, NAND-FLASH) initialization			*/
-#define CFG_EBC_PB1AP		0x92015480
-#define CFG_EBC_PB1CR		0xF4018000  /* BAS=0xF40,BS=1MB,BU=R/W,BW=8bit	*/
+#define CONFIG_SYS_I2C_EEPROM_ADDR	0x50	/* EEPROM 24WC16 */
+#define CONFIG_SYS_EEPROM_WREN         1
 
-/* Memory Bank 2 (8 Bit Peripheral: CAN, UART, RTC) initialization		*/
-#define CFG_EBC_PB2AP		0x010053C0  /* BWT=2,WBN=1,WBF=1,TH=1,RE=1,SOR=1,BEM=1 */
-#define CFG_EBC_PB2CR		0xF0018000  /* BAS=0xF00,BS=1MB,BU=R/W,BW=8bit	*/
+/* 24WC16 */
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1	/* Bytes of address		*/
+/* mask of address bits that overflow into the "EEPROM chip address"    */
+#define CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW	0x07
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 4	/* The 24WC16 has   */
+					/* 16 byte page write mode using */
+					/* last 4 bits of the address   */
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	10   /* and takes up to 10 msec */
 
-/* Memory Bank 3 (16 Bit Peripheral: FPGA internal, dig. IO) initialization	*/
-#define CFG_EBC_PB3AP		0x010053C0  /* BWT=2,WBN=1,WBF=1,TH=1,RE=1,SOR=1,BEM=1 */
-#define CFG_EBC_PB3CR		0xF011A000  /* BAS=0xF01,BS=1MB,BU=R/W,BW=16bit */
+/*
+ * External Bus Controller (EBC) Setup
+ */
+#define CAN_BA		0xF0000000	    /* CAN Base Address	        */
+#define DUART0_BA	0xF0000400	    /* DUART Base Address       */
+#define DUART1_BA	0xF0000408	    /* DUART Base Address       */
+#define RTC_BA		0xF0000500	    /* RTC Base Address         */
+#define VGA_BA		0xF1000000	    /* Epson VGA Base Address   */
+#define CONFIG_SYS_NAND_BASE	0xF4000000	    /* NAND FLASH Base Address  */
+
+/* Memory Bank 0 (Flash Bank 0, NOR-FLASH) initialization */
+/* TWT=16,CSN=1,OEN=1,WBN=1,WBF=1,TH=4,SOR=1 */
+#define CONFIG_SYS_EBC_PB0AP		0x92015480
+/* BAS=0xFFC,BS=4MB,BU=R/W,BW=16bit */
+#define CONFIG_SYS_EBC_PB0CR		0xFFC5A000
+
+/* Memory Bank 1 (Flash Bank 1, NAND-FLASH) initialization */
+#define CONFIG_SYS_EBC_PB1AP		0x92015480
+/* BAS=0xF40,BS=1MB,BU=R/W,BW=8bit */
+#define CONFIG_SYS_EBC_PB1CR		0xF4018000
+
+/* Memory Bank 2 (8 Bit Peripheral: CAN, UART, RTC) initialization */
+/* BWT=2,WBN=1,WBF=1,TH=1,RE=1,SOR=1,BEM=1 */
+#define CONFIG_SYS_EBC_PB2AP		0x010053C0
+/* BAS=0xF00,BS=1MB,BU=R/W,BW=8bit */
+#define CONFIG_SYS_EBC_PB2CR		0xF0018000
+
+/* Memory Bank 3 (16 Bit Peripheral: FPGA internal, dig. IO) initialization */
+/* BWT=2,WBN=1,WBF=1,TH=1,RE=1,SOR=1,BEM=1 */
+#define CONFIG_SYS_EBC_PB3AP		0x010053C0
+/* BAS=0xF01,BS=1MB,BU=R/W,BW=16bit */
+#define CONFIG_SYS_EBC_PB3CR		0xF011A000
 
-/*-----------------------------------------------------------------------
+/*
  * FPGA stuff
  */
-
-#define CFG_FPGA_BASE_ADDR 0xF0100100	    /* FPGA internal Base Address	*/
+#define CONFIG_SYS_FPGA_BASE_ADDR 0xF0100100	    /* FPGA internal Base Address */
 
 /* FPGA internal regs */
-#define CFG_FPGA_CTRL		0x000
+#define CONFIG_SYS_FPGA_CTRL		0x000
 
 /* FPGA Control Reg */
-#define CFG_FPGA_CTRL_CF_RESET	0x0001
-#define CFG_FPGA_CTRL_WDI	0x0002
-#define CFG_FPGA_CTRL_PS2_RESET 0x0020
+#define CONFIG_SYS_FPGA_CTRL_CF_RESET	0x0001
+#define CONFIG_SYS_FPGA_CTRL_WDI	0x0002
+#define CONFIG_SYS_FPGA_CTRL_PS2_RESET 0x0020
 
-#define CFG_FPGA_SPARTAN2	1	    /* using Xilinx Spartan 2 now    */
-#define CFG_FPGA_MAX_SIZE	128*1024    /* 128kByte is enough for XC2S50E*/
+#define CONFIG_SYS_FPGA_SPARTAN2	1	    /* using Xilinx Spartan 2 now */
+#define CONFIG_SYS_FPGA_MAX_SIZE	128*1024    /* 128kByte is enough for XC2S50E*/
 
 /* FPGA program pin configuration */
-#define CFG_FPGA_PRG		0x04000000  /* FPGA program pin (ppc output) */
-#define CFG_FPGA_CLK		0x02000000  /* FPGA clk pin (ppc output)     */
-#define CFG_FPGA_DATA		0x01000000  /* FPGA data pin (ppc output)    */
-#define CFG_FPGA_INIT		0x00010000  /* FPGA init pin (ppc input)     */
-#define CFG_FPGA_DONE		0x00008000  /* FPGA done pin (ppc input)     */
+#define CONFIG_SYS_FPGA_PRG		0x04000000  /* FPGA program pin (ppc output) */
+#define CONFIG_SYS_FPGA_CLK		0x02000000  /* FPGA clk pin (ppc output) */
+#define CONFIG_SYS_FPGA_DATA		0x01000000  /* FPGA data pin (ppc output) */
+#define CONFIG_SYS_FPGA_INIT		0x00010000  /* FPGA init pin (ppc input) */
+#define CONFIG_SYS_FPGA_DONE		0x00008000  /* FPGA done pin (ppc input) */
 
-/*-----------------------------------------------------------------------
+/*
  * Definitions for initial stack pointer and data area (in data cache)
  */
 /* use on chip memory ( OCM ) for temperary stack until sdram is tested */
-#define CFG_TEMP_STACK_OCM	  1
+#define CONFIG_SYS_TEMP_STACK_OCM	  1
 
 /* On Chip Memory location */
-#define CFG_OCM_DATA_ADDR	0xF8000000
-#define CFG_OCM_DATA_SIZE	0x1000
-#define CFG_INIT_RAM_ADDR	CFG_OCM_DATA_ADDR /* inside of SDRAM		*/
-#define CFG_INIT_RAM_END	CFG_OCM_DATA_SIZE /* End of used area in RAM	*/
+#define CONFIG_SYS_OCM_DATA_ADDR	0xF8000000
+#define CONFIG_SYS_OCM_DATA_SIZE	0x1000
+#define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_OCM_DATA_ADDR /* inside of SDRAM */
+#define CONFIG_SYS_INIT_RAM_END	CONFIG_SYS_OCM_DATA_SIZE /* End of used area in RAM  */
 
-#define CFG_GBL_DATA_SIZE      128  /* size in bytes reserved for initial data */
-#define CFG_GBL_DATA_OFFSET    (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_GBL_DATA_SIZE      128 /* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET    (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
-/*-----------------------------------------------------------------------
+/*
  * Definitions for GPIO setup (PPC405EP specific)
  *
  * GPIO0[0]	- External Bus Controller BLAST output
@@ -381,30 +381,30 @@
  * GPIO0[28-29] - UART1 data signal input/output
  * GPIO0[30-31] - EMAC0 and EMAC1 reject packet inputs
  */
-#define CFG_GPIO0_OSRH		0x00000550
-#define CFG_GPIO0_OSRL		0x00000110
-#define CFG_GPIO0_ISR1H		0x00000000
-#define CFG_GPIO0_ISR1L		0x15555445
-#define CFG_GPIO0_TSRH		0x00000000
-#define CFG_GPIO0_TSRL		0x00000000
-#define CFG_GPIO0_TCR		0x77FE0014
+#define CONFIG_SYS_GPIO0_OSRH		0x00000550
+#define CONFIG_SYS_GPIO0_OSRL		0x00000110
+#define CONFIG_SYS_GPIO0_ISR1H		0x00000000
+#define CONFIG_SYS_GPIO0_ISR1L		0x15555445
+#define CONFIG_SYS_GPIO0_TSRH		0x00000000
+#define CONFIG_SYS_GPIO0_TSRL		0x00000000
+#define CONFIG_SYS_GPIO0_TCR		0x77FE0014
 
-#define CFG_DUART_RST		(0x80000000 >> 14)
-#define CFG_EEPROM_WP		(0x80000000 >> 0)
+#define CONFIG_SYS_DUART_RST		(0x80000000 >> 14)
+#define CONFIG_SYS_EEPROM_WP		(0x80000000 >> 0)
 
 /*
  * Internal Definitions
  *
  * Boot Flags
  */
-#define BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH	*/
-#define BOOTFLAG_WARM	0x02		/* Software reboot			*/
+#define BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH */
+#define BOOTFLAG_WARM	0x02		/* Software reboot */
 
 /*
- * Default speed selection (cpu_plb_opb_ebc) in mhz.
+ * Default speed selection (cpu_plb_opb_ebc) in MHz.
  * This value will be set if iic boot eprom is disabled.
  */
-#if 0
+#if 1
 #define PLLMR0_DEFAULT	 PLLMR0_266_133_66_33
 #define PLLMR1_DEFAULT	 PLLMR1_266_133_66_33
 #endif
@@ -412,9 +412,19 @@
 #define PLLMR0_DEFAULT	 PLLMR0_200_100_50_33
 #define PLLMR1_DEFAULT	 PLLMR1_200_100_50_33
 #endif
-#if 1
+#if 0
 #define PLLMR0_DEFAULT	 PLLMR0_133_66_66_33
 #define PLLMR1_DEFAULT	 PLLMR1_133_66_66_33
 #endif
 
+/*
+ * PCI OHCI controller
+ */
+#define CONFIG_USB_OHCI_NEW	1
+#define CONFIG_PCI_OHCI		1
+#define CONFIG_SYS_OHCI_SWAP_REG_ACCESS 1
+#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 15
+#define CONFIG_SYS_USB_OHCI_SLOT_NAME	"ohci_pci"
+#define CONFIG_USB_STORAGE	1
+
 #endif	/* __CONFIG_H */
diff --git a/include/configs/PM520.h b/include/configs/PM520.h
index 5e0bb056d..e250e0338 100644
--- a/include/configs/PM520.h
+++ b/include/configs/PM520.h
@@ -33,7 +33,7 @@
 #define CONFIG_MPC5xxx		1	/* This is an MPC5xxx CPU */
 #define CONFIG_PM520		1	/* ... on PM520 board */
 
-#define CFG_MPC5XXX_CLKIN	33000000 /* ... running at 33MHz */
+#define CONFIG_SYS_MPC5XXX_CLKIN	33000000 /* ... running at 33MHz */
 
 #define CONFIG_MISC_INIT_R
 
@@ -47,7 +47,7 @@
  */
 #define CONFIG_PSC_CONSOLE	1	/* console is on PSC1 */
 #define CONFIG_BAUDRATE		9600	/* ... at 9600 bps */
-#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
 
 
 #ifdef CONFIG_MPC5200	/* MPC5100 PCI is not supported yet. */
@@ -72,7 +72,7 @@
 #define CONFIG_NET_MULTI	1
 #define CONFIG_MII		1
 #define CONFIG_EEPRO100		1
-#define CFG_RX_ETH_BUFFER	8  /* use 8 rx buffer on eepro100  */
+#define CONFIG_SYS_RX_ETH_BUFFER	8  /* use 8 rx buffer on eepro100  */
 #undef  CONFIG_NS8382X
 
 #endif
@@ -161,42 +161,42 @@
 /*
  * IPB Bus clocking configuration.
  */
-#undef CFG_IPBCLK_EQUALS_XLBCLK		/* define for 133MHz speed */
+#undef CONFIG_SYS_IPBCLK_EQUALS_XLBCLK		/* define for 133MHz speed */
 #endif
 /*
  * I2C configuration
  */
 #define CONFIG_HARD_I2C		1	/* I2C with hardware support */
-#define CFG_I2C_MODULE		2	/* Select I2C module #1 or #2 */
+#define CONFIG_SYS_I2C_MODULE		2	/* Select I2C module #1 or #2 */
 
-#define CFG_I2C_SPEED		100000 /* 100 kHz */
-#define CFG_I2C_SLAVE		0x7F
+#define CONFIG_SYS_I2C_SPEED		100000 /* 100 kHz */
+#define CONFIG_SYS_I2C_SLAVE		0x7F
 
 /*
  * EEPROM configuration
  */
-#define CFG_I2C_EEPROM_ADDR		0x58
-#define CFG_I2C_EEPROM_ADDR_LEN		1
-#define CFG_EEPROM_PAGE_WRITE_BITS	4
-#define CFG_EEPROM_PAGE_WRITE_DELAY_MS	10
+#define CONFIG_SYS_I2C_EEPROM_ADDR		0x58
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN		1
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS	4
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	10
 
 /*
  * RTC configuration
  */
 #define CONFIG_RTC_PCF8563
-#define CFG_I2C_RTC_ADDR		0x51
+#define CONFIG_SYS_I2C_RTC_ADDR		0x51
 
 /*
  * Disk-On-Chip configuration
  */
 
-#define CFG_DOC_SHORT_TIMEOUT
-#define CFG_MAX_DOC_DEVICE	1	/* Max number of DOC devices	*/
+#define CONFIG_SYS_DOC_SHORT_TIMEOUT
+#define CONFIG_SYS_MAX_DOC_DEVICE	1	/* Max number of DOC devices	*/
 
-#define CFG_DOC_SUPPORT_2000
-#define CFG_DOC_SUPPORT_MILLENNIUM
-#define CFG_DOC_BASE		0xE0000000
-#define CFG_DOC_SIZE		0x00100000
+#define CONFIG_SYS_DOC_SUPPORT_2000
+#define CONFIG_SYS_DOC_SUPPORT_MILLENNIUM
+#define CONFIG_SYS_DOC_BASE		0xE0000000
+#define CONFIG_SYS_DOC_SIZE		0x00100000
 
 #if defined(CONFIG_BOOT_ROM)
 /*
@@ -208,11 +208,11 @@
  *               0xFD000000 for 16 MB
  *               0xFD800000 for  8 MB
  */
-#define CFG_FLASH_BASE		0xFA000000
-#define CFG_FLASH_SIZE		0x04000000
-#define CFG_BOOTROM_BASE	0xFFF00000
-#define CFG_BOOTROM_SIZE	0x00080000
-#define CFG_ENV_ADDR		(0xFDF00000 + 0x40000)
+#define CONFIG_SYS_FLASH_BASE		0xFA000000
+#define CONFIG_SYS_FLASH_SIZE		0x04000000
+#define CONFIG_SYS_BOOTROM_BASE	0xFFF00000
+#define CONFIG_SYS_BOOTROM_SIZE	0x00080000
+#define CONFIG_ENV_ADDR		(0xFDF00000 + 0x40000)
 #else
 /*
  * Flash configuration (8,16 or 32 MB)
@@ -223,19 +223,19 @@
  *               0xFF000000 for 16 MB
  *               0xFF800000 for  8 MB
  */
-#define CFG_FLASH_BASE		0xFC000000
-#define CFG_FLASH_SIZE		0x04000000
-#define CFG_ENV_ADDR		(0xFFF00000 + 0x40000)
+#define CONFIG_SYS_FLASH_BASE		0xFC000000
+#define CONFIG_SYS_FLASH_SIZE		0x04000000
+#define CONFIG_ENV_ADDR		(0xFFF00000 + 0x40000)
 #endif
-#define CFG_MAX_FLASH_BANKS	1	/* max num of memory banks      */
+#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max num of memory banks      */
 
-#define CFG_MAX_FLASH_SECT	256	/* max num of sects on one chip */
+#define CONFIG_SYS_MAX_FLASH_SECT	256	/* max num of sects on one chip */
 
-#define CFG_FLASH_ERASE_TOUT	240000	/* Flash Erase Timeout (in ms)  */
-#define CFG_FLASH_WRITE_TOUT	500	/* Flash Write Timeout (in ms)  */
-#define CFG_FLASH_LOCK_TOUT	5	/* Timeout for Flash Set Lock Bit (in ms) */
-#define CFG_FLASH_UNLOCK_TOUT	10000	/* Timeout for Flash Clear Lock Bits (in ms) */
-#define CFG_FLASH_PROTECTION		/* "Real" (hardware) sectors protection */
+#define CONFIG_SYS_FLASH_ERASE_TOUT	240000	/* Flash Erase Timeout (in ms)  */
+#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Flash Write Timeout (in ms)  */
+#define CONFIG_SYS_FLASH_LOCK_TOUT	5	/* Timeout for Flash Set Lock Bit (in ms) */
+#define CONFIG_SYS_FLASH_UNLOCK_TOUT	10000	/* Timeout for Flash Clear Lock Bits (in ms) */
+#define CONFIG_SYS_FLASH_PROTECTION		/* "Real" (hardware) sectors protection */
 
 #define PHYS_FLASH_SECT_SIZE	0x00040000 /* 256 KB sectors (x2) */
 
@@ -245,35 +245,35 @@
 /*
  * Environment settings
  */
-#define CFG_ENV_IS_IN_FLASH	1
-#define CFG_ENV_SIZE		0x10000
-#define CFG_ENV_SECT_SIZE	0x40000
+#define CONFIG_ENV_IS_IN_FLASH	1
+#define CONFIG_ENV_SIZE		0x10000
+#define CONFIG_ENV_SECT_SIZE	0x40000
 #define CONFIG_ENV_OVERWRITE	1
 
 /*
  * Memory map
  */
-#define CFG_MBAR		0xf0000000
-#define CFG_SDRAM_BASE		0x00000000
-#define CFG_DEFAULT_MBAR	0x80000000
+#define CONFIG_SYS_MBAR		0xf0000000
+#define CONFIG_SYS_SDRAM_BASE		0x00000000
+#define CONFIG_SYS_DEFAULT_MBAR	0x80000000
 
 /* Use SRAM until RAM will be available */
-#define CFG_INIT_RAM_ADDR	MPC5XXX_SRAM
-#define CFG_INIT_RAM_END	MPC5XXX_SRAM_SIZE	/* End of used area in DPRAM */
+#define CONFIG_SYS_INIT_RAM_ADDR	MPC5XXX_SRAM
+#define CONFIG_SYS_INIT_RAM_END	MPC5XXX_SRAM_SIZE	/* End of used area in DPRAM */
 
 
-#define CFG_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
-#define CFG_MONITOR_BASE    TEXT_BASE
-#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
-#   define CFG_RAMBOOT		1
+#define CONFIG_SYS_MONITOR_BASE    TEXT_BASE
+#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
+#   define CONFIG_SYS_RAMBOOT		1
 #endif
 
-#define CFG_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor	*/
-#define CFG_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/
-#define CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
+#define CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor	*/
+#define CONFIG_SYS_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/
+#define CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
 
 /*
  * Ethernet configuration
@@ -288,69 +288,69 @@
 /*
  * GPIO configuration
  */
-#define CFG_GPS_PORT_CONFIG	0x10000004
+#define CONFIG_SYS_GPS_PORT_CONFIG	0x10000004
 
 /*
  * Miscellaneous configurable options
  */
-#define CFG_LONGHELP			/* undef to save memory	    */
-#define CFG_PROMPT		"=> "	/* Monitor Command Prompt   */
+#define CONFIG_SYS_LONGHELP			/* undef to save memory	    */
+#define CONFIG_SYS_PROMPT		"=> "	/* Monitor Command Prompt   */
 #if defined(CONFIG_CMD_KGDB)
-#define CFG_CBSIZE		1024	/* Console I/O Buffer Size  */
+#define CONFIG_SYS_CBSIZE		1024	/* Console I/O Buffer Size  */
 #else
-#define CFG_CBSIZE		256	/* Console I/O Buffer Size  */
+#define CONFIG_SYS_CBSIZE		256	/* Console I/O Buffer Size  */
 #endif
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16)	/* Print Buffer Size */
-#define CFG_MAXARGS		16		/* max number of command args	*/
-#define CFG_BARGSIZE		CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)	/* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS		16		/* max number of command args	*/
+#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
 
-#define CFG_MEMTEST_START	0x00100000	/* memtest works on */
-#define CFG_MEMTEST_END		0x00f00000	/* 1 ... 15 MB in DRAM	*/
+#define CONFIG_SYS_MEMTEST_START	0x00100000	/* memtest works on */
+#define CONFIG_SYS_MEMTEST_END		0x00f00000	/* 1 ... 15 MB in DRAM	*/
 
-#define CFG_LOAD_ADDR		0x100000	/* default load address */
+#define CONFIG_SYS_LOAD_ADDR		0x100000	/* default load address */
 
-#define CFG_HZ			1000	/* decrementer freq: 1 ms ticks */
+#define CONFIG_SYS_HZ			1000	/* decrementer freq: 1 ms ticks */
 
-#define CFG_CACHELINE_SIZE	32	/* For MPC5xxx CPUs */
+#define CONFIG_SYS_CACHELINE_SIZE	32	/* For MPC5xxx CPUs */
 #if defined(CONFIG_CMD_KGDB)
-#  define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value */
+#  define CONFIG_SYS_CACHELINE_SHIFT	5	/* log base 2 of the above value */
 #endif
 
 /*
  * Various low-level settings
  */
 #if defined(CONFIG_MPC5200)
-#define CFG_HID0_INIT		HID0_ICE | HID0_ICFI
-#define CFG_HID0_FINAL		HID0_ICE
+#define CONFIG_SYS_HID0_INIT		HID0_ICE | HID0_ICFI
+#define CONFIG_SYS_HID0_FINAL		HID0_ICE
 #else
-#define CFG_HID0_INIT		0
-#define CFG_HID0_FINAL		0
+#define CONFIG_SYS_HID0_INIT		0
+#define CONFIG_SYS_HID0_FINAL		0
 #endif
 
 #if defined(CONFIG_BOOT_ROM)
-#define CFG_BOOTCS_START	CFG_BOOTROM_BASE
-#define CFG_BOOTCS_SIZE		CFG_BOOTROM_SIZE
-#define CFG_BOOTCS_CFG		0x00047800
-#define CFG_CS0_START		CFG_BOOTROM_BASE
-#define CFG_CS0_SIZE		CFG_BOOTROM_SIZE
-#define CFG_CS1_START		CFG_FLASH_BASE
-#define CFG_CS1_SIZE		CFG_FLASH_SIZE
-#define CFG_CS1_CFG		0x0004FF00
+#define CONFIG_SYS_BOOTCS_START	CONFIG_SYS_BOOTROM_BASE
+#define CONFIG_SYS_BOOTCS_SIZE		CONFIG_SYS_BOOTROM_SIZE
+#define CONFIG_SYS_BOOTCS_CFG		0x00047800
+#define CONFIG_SYS_CS0_START		CONFIG_SYS_BOOTROM_BASE
+#define CONFIG_SYS_CS0_SIZE		CONFIG_SYS_BOOTROM_SIZE
+#define CONFIG_SYS_CS1_START		CONFIG_SYS_FLASH_BASE
+#define CONFIG_SYS_CS1_SIZE		CONFIG_SYS_FLASH_SIZE
+#define CONFIG_SYS_CS1_CFG		0x0004FF00
 #else
-#define CFG_BOOTCS_START	CFG_FLASH_BASE
-#define CFG_BOOTCS_SIZE		CFG_FLASH_SIZE
-#define CFG_BOOTCS_CFG		0x0004FF00
-#define CFG_CS0_START		CFG_FLASH_BASE
-#define CFG_CS0_SIZE		CFG_FLASH_SIZE
-#define CFG_CS1_START		CFG_DOC_BASE
-#define CFG_CS1_SIZE		CFG_DOC_SIZE
-#define CFG_CS1_CFG		0x00047800
+#define CONFIG_SYS_BOOTCS_START	CONFIG_SYS_FLASH_BASE
+#define CONFIG_SYS_BOOTCS_SIZE		CONFIG_SYS_FLASH_SIZE
+#define CONFIG_SYS_BOOTCS_CFG		0x0004FF00
+#define CONFIG_SYS_CS0_START		CONFIG_SYS_FLASH_BASE
+#define CONFIG_SYS_CS0_SIZE		CONFIG_SYS_FLASH_SIZE
+#define CONFIG_SYS_CS1_START		CONFIG_SYS_DOC_BASE
+#define CONFIG_SYS_CS1_SIZE		CONFIG_SYS_DOC_SIZE
+#define CONFIG_SYS_CS1_CFG		0x00047800
 #endif
 
-#define CFG_CS_BURST		0x00000000
-#define CFG_CS_DEADCYCLE	0x33333333
+#define CONFIG_SYS_CS_BURST		0x00000000
+#define CONFIG_SYS_CS_DEADCYCLE	0x33333333
 
-#define CFG_RESET_ADDRESS	0xff000000
+#define CONFIG_SYS_RESET_ADDRESS	0xff000000
 
 /*-----------------------------------------------------------------------
  * USB stuff
@@ -372,23 +372,23 @@
 #undef	CONFIG_IDE_RESET		/* reset for ide supported	*/
 #define CONFIG_IDE_PREINIT
 
-#define CFG_IDE_MAXBUS		1	/* max. 1 IDE bus		*/
-#define CFG_IDE_MAXDEVICE	2	/* max. 2 drive per IDE bus	*/
+#define CONFIG_SYS_IDE_MAXBUS		1	/* max. 1 IDE bus		*/
+#define CONFIG_SYS_IDE_MAXDEVICE	2	/* max. 2 drive per IDE bus	*/
 
-#define CFG_ATA_IDE0_OFFSET	0x0000
+#define CONFIG_SYS_ATA_IDE0_OFFSET	0x0000
 
-#define CFG_ATA_BASE_ADDR	MPC5XXX_ATA
+#define CONFIG_SYS_ATA_BASE_ADDR	MPC5XXX_ATA
 
 /* Offset for data I/O			*/
-#define CFG_ATA_DATA_OFFSET	(0x0060)
+#define CONFIG_SYS_ATA_DATA_OFFSET	(0x0060)
 
 /* Offset for normal register accesses	*/
-#define CFG_ATA_REG_OFFSET	(CFG_ATA_DATA_OFFSET)
+#define CONFIG_SYS_ATA_REG_OFFSET	(CONFIG_SYS_ATA_DATA_OFFSET)
 
 /* Offset for alternate registers	*/
-#define CFG_ATA_ALT_OFFSET	(0x005C)
+#define CONFIG_SYS_ATA_ALT_OFFSET	(0x005C)
 
 /* Interval between registers                                                */
-#define CFG_ATA_STRIDE          4
+#define CONFIG_SYS_ATA_STRIDE          4
 
 #endif /* __CONFIG_H */
diff --git a/include/configs/PM826.h b/include/configs/PM826.h
index 190e2a442..b58f529b9 100644
--- a/include/configs/PM826.h
+++ b/include/configs/PM826.h
@@ -28,7 +28,7 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
-#undef CFG_RAMBOOT
+#undef CONFIG_SYS_RAMBOOT
 
 /*
  * High Level Configuration Options
@@ -55,8 +55,8 @@
 /* enable I2C and select the hardware/software driver */
 #undef  CONFIG_HARD_I2C
 #define CONFIG_SOFT_I2C		1	/* I2C bit-banged		*/
-# define CFG_I2C_SPEED		50000
-# define CFG_I2C_SLAVE		0xFE
+# define CONFIG_SYS_I2C_SPEED		50000
+# define CONFIG_SYS_I2C_SLAVE		0xFE
 /*
  * Software (bit-bang) I2C driver configuration
  */
@@ -72,7 +72,7 @@
 
 
 #define CONFIG_RTC_PCF8563
-#define CFG_I2C_RTC_ADDR	0x51
+#define CONFIG_SYS_I2C_RTC_ADDR	0x51
 
 /*
  * select serial console configuration
@@ -117,25 +117,25 @@
  * - Tx-CLK is CLK10
  */
 #define	CONFIG_ETHER_ON_FCC1
-# define CFG_CMXFCR_MASK1	(CMXFCR_FC1|CMXFCR_RF1CS_MSK|CMXFCR_TF1CS_MSK)
+# define CONFIG_SYS_CMXFCR_MASK1	(CMXFCR_FC1|CMXFCR_RF1CS_MSK|CMXFCR_TF1CS_MSK)
 #ifndef CONFIG_DB_CR826_J30x_ON
-# define CFG_CMXFCR_VALUE1	(CMXFCR_RF1CS_CLK11|CMXFCR_TF1CS_CLK10)
+# define CONFIG_SYS_CMXFCR_VALUE1	(CMXFCR_RF1CS_CLK11|CMXFCR_TF1CS_CLK10)
 #else
-# define CFG_CMXFCR_VALUE1	(CMXFCR_RF1CS_CLK11|CMXFCR_TF1CS_CLK12)
+# define CONFIG_SYS_CMXFCR_VALUE1	(CMXFCR_RF1CS_CLK11|CMXFCR_TF1CS_CLK12)
 #endif
 /*
  * - Rx-CLK is CLK15
  * - Tx-CLK is CLK14
  */
 #define	CONFIG_ETHER_ON_FCC2
-# define CFG_CMXFCR_MASK2	(CMXFCR_FC2|CMXFCR_RF2CS_MSK|CMXFCR_TF2CS_MSK)
-# define CFG_CMXFCR_VALUE2	(CMXFCR_RF2CS_CLK13|CMXFCR_TF2CS_CLK14)
+# define CONFIG_SYS_CMXFCR_MASK2	(CMXFCR_FC2|CMXFCR_RF2CS_MSK|CMXFCR_TF2CS_MSK)
+# define CONFIG_SYS_CMXFCR_VALUE2	(CMXFCR_RF2CS_CLK13|CMXFCR_TF2CS_CLK14)
 /*
  * - RAM for BD/Buffers is on the 60x Bus (see 28-13)
  * - Enable Full Duplex in FSMR
  */
-# define CFG_CPMFCR_RAMTYPE	0
-# define CFG_FCC_PSMR		(FCC_PSMR_FDE|FCC_PSMR_LPB)
+# define CONFIG_SYS_CPMFCR_RAMTYPE	0
+# define CONFIG_SYS_FCC_PSMR		(FCC_PSMR_FDE|FCC_PSMR_LPB)
 
 /* system clock rate (CLKIN) - equal to the 60x and local bus speed */
 #define CONFIG_8260_CLKIN	64000000	/* in Hz */
@@ -147,7 +147,7 @@
 #endif
 
 #define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
-#undef	CFG_LOADS_BAUD_CHANGE		/* don't allow baudrate change	*/
+#undef	CONFIG_SYS_LOADS_BAUD_CHANGE		/* don't allow baudrate change	*/
 
 #undef	CONFIG_WATCHDOG			/* watchdog disabled		*/
 
@@ -186,150 +186,150 @@
  * Disk-On-Chip configuration
  */
 
-#define CFG_DOC_SHORT_TIMEOUT
-#define CFG_MAX_DOC_DEVICE	1	/* Max number of DOC devices	*/
+#define CONFIG_SYS_DOC_SHORT_TIMEOUT
+#define CONFIG_SYS_MAX_DOC_DEVICE	1	/* Max number of DOC devices	*/
 
-#define CFG_DOC_SUPPORT_2000
-#define CFG_DOC_SUPPORT_MILLENNIUM
+#define CONFIG_SYS_DOC_SUPPORT_2000
+#define CONFIG_SYS_DOC_SUPPORT_MILLENNIUM
 
 /*
  * Miscellaneous configurable options
  */
-#define	CFG_LONGHELP			/* undef to save memory		*/
-#define	CFG_PROMPT	"=> "		/* Monitor Command Prompt	*/
+#define	CONFIG_SYS_LONGHELP			/* undef to save memory		*/
+#define	CONFIG_SYS_PROMPT	"=> "		/* Monitor Command Prompt	*/
 #if defined(CONFIG_CMD_KGDB)
-#define	CFG_CBSIZE	1024		/* Console I/O Buffer Size	*/
+#define	CONFIG_SYS_CBSIZE	1024		/* Console I/O Buffer Size	*/
 #else
-#define	CFG_CBSIZE	256		/* Console I/O Buffer Size	*/
+#define	CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size	*/
 #endif
-#define	CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define	CFG_MAXARGS	16		/* max number of command args	*/
-#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+#define	CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define	CONFIG_SYS_MAXARGS	16		/* max number of command args	*/
+#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
 
-#define CFG_MEMTEST_START	0x0400000	/* memtest works on	*/
-#define CFG_MEMTEST_END	0x0C00000	/* 4 ... 12 MB in DRAM	*/
+#define CONFIG_SYS_MEMTEST_START	0x0400000	/* memtest works on	*/
+#define CONFIG_SYS_MEMTEST_END	0x0C00000	/* 4 ... 12 MB in DRAM	*/
 
-#define	CFG_LOAD_ADDR	0x100000	/* default load address	*/
+#define	CONFIG_SYS_LOAD_ADDR	0x100000	/* default load address	*/
 
-#define	CFG_HZ		1000		/* decrementer freq: 1 ms ticks	*/
+#define	CONFIG_SYS_HZ		1000		/* decrementer freq: 1 ms ticks	*/
 
-#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
 
-#define	CFG_RESET_ADDRESS 0xFDFFFFFC	/* "bad" address		*/
+#define	CONFIG_SYS_RESET_ADDRESS 0xFDFFFFFC	/* "bad" address		*/
 
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define CFG_BOOTMAPSZ        (8 << 20)       /* Initial Memory map for Linux */
+#define CONFIG_SYS_BOOTMAPSZ        (8 << 20)       /* Initial Memory map for Linux */
 
 /*-----------------------------------------------------------------------
  * Flash and Boot ROM mapping
  */
 #ifdef CONFIG_FLASH_32MB
-#define	CFG_FLASH0_BASE		0x40000000
-#define	CFG_FLASH0_SIZE		0x02000000
+#define	CONFIG_SYS_FLASH0_BASE		0x40000000
+#define	CONFIG_SYS_FLASH0_SIZE		0x02000000
 #else
-#define	CFG_FLASH0_BASE		0xFF000000
-#define	CFG_FLASH0_SIZE		0x00800000
+#define	CONFIG_SYS_FLASH0_BASE		0xFF000000
+#define	CONFIG_SYS_FLASH0_SIZE		0x00800000
 #endif
-#define	CFG_BOOTROM_BASE	0xFF800000
-#define	CFG_BOOTROM_SIZE	0x00080000
-#define CFG_DOC_BASE		0xFF800000
-#define CFG_DOC_SIZE		0x00100000
+#define	CONFIG_SYS_BOOTROM_BASE	0xFF800000
+#define	CONFIG_SYS_BOOTROM_SIZE	0x00080000
+#define CONFIG_SYS_DOC_BASE		0xFF800000
+#define CONFIG_SYS_DOC_SIZE		0x00100000
 
 /* Flash bank size (for preliminary settings)
  */
-#define CFG_FLASH_SIZE CFG_FLASH0_SIZE
+#define CONFIG_SYS_FLASH_SIZE CONFIG_SYS_FLASH0_SIZE
 
 /*-----------------------------------------------------------------------
  * FLASH organization
  */
-#define CFG_MAX_FLASH_BANKS	1	/* max num of memory banks      */
+#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max num of memory banks      */
 #ifdef CONFIG_FLASH_32MB
-#define CFG_MAX_FLASH_SECT	135	/* max num of sects on one chip */
+#define CONFIG_SYS_MAX_FLASH_SECT	135	/* max num of sects on one chip */
 #else
-#define CFG_MAX_FLASH_SECT	128	/* max num of sects on one chip */
+#define CONFIG_SYS_MAX_FLASH_SECT	128	/* max num of sects on one chip */
 #endif
-#define CFG_FLASH_ERASE_TOUT	240000	/* Flash Erase Timeout (in ms)  */
-#define CFG_FLASH_WRITE_TOUT	500	/* Flash Write Timeout (in ms)  */
+#define CONFIG_SYS_FLASH_ERASE_TOUT	240000	/* Flash Erase Timeout (in ms)  */
+#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Flash Write Timeout (in ms)  */
 
 #if 0
 /* Start port with environment in flash; switch to EEPROM later */
-#define CFG_ENV_IS_IN_FLASH	1
-#define CFG_ENV_ADDR		(CFG_FLASH_BASE+0x40000)
-#define CFG_ENV_SIZE		0x40000
-#define CFG_ENV_SECT_SIZE	0x40000
+#define CONFIG_ENV_IS_IN_FLASH	1
+#define CONFIG_ENV_ADDR		(CONFIG_SYS_FLASH_BASE+0x40000)
+#define CONFIG_ENV_SIZE		0x40000
+#define CONFIG_ENV_SECT_SIZE	0x40000
 #else
 /* Final version: environment in EEPROM */
-#define CFG_ENV_IS_IN_EEPROM	1
-#define CFG_I2C_EEPROM_ADDR	0x58
-#define CFG_I2C_EEPROM_ADDR_LEN	1
-#define CFG_EEPROM_PAGE_WRITE_BITS	4
-#define CFG_EEPROM_PAGE_WRITE_DELAY_MS	10	/* and takes up to 10 msec */
-#define CFG_ENV_OFFSET		512
-#define CFG_ENV_SIZE		(2048 - 512)
+#define CONFIG_ENV_IS_IN_EEPROM	1
+#define CONFIG_SYS_I2C_EEPROM_ADDR	0x58
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN	1
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS	4
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	10	/* and takes up to 10 msec */
+#define CONFIG_ENV_OFFSET		512
+#define CONFIG_ENV_SIZE		(2048 - 512)
 #endif
 
 /*-----------------------------------------------------------------------
  * Hard Reset Configuration Words
  *
- * if you change bits in the HRCW, you must also change the CFG_*
+ * if you change bits in the HRCW, you must also change the CONFIG_SYS_*
  * defines for the various registers affected by the HRCW e.g. changing
- * HRCW_DPPCxx requires you to also change CFG_SIUMCR.
+ * HRCW_DPPCxx requires you to also change CONFIG_SYS_SIUMCR.
  */
 #if defined(CONFIG_BOOT_ROM)
-#define CFG_HRCW_MASTER		(HRCW_BPS01 | HRCW_CIP | HRCW_ISB100 | HRCW_BMS)
+#define CONFIG_SYS_HRCW_MASTER		(HRCW_BPS01 | HRCW_CIP | HRCW_ISB100 | HRCW_BMS)
 #else
-#define CFG_HRCW_MASTER		(HRCW_CIP | HRCW_ISB100 | HRCW_BMS)
+#define CONFIG_SYS_HRCW_MASTER		(HRCW_CIP | HRCW_ISB100 | HRCW_BMS)
 #endif
 
 /* no slaves so just fill with zeros */
-#define CFG_HRCW_SLAVE1		0
-#define CFG_HRCW_SLAVE2		0
-#define CFG_HRCW_SLAVE3		0
-#define CFG_HRCW_SLAVE4		0
-#define CFG_HRCW_SLAVE5		0
-#define CFG_HRCW_SLAVE6		0
-#define CFG_HRCW_SLAVE7		0
+#define CONFIG_SYS_HRCW_SLAVE1		0
+#define CONFIG_SYS_HRCW_SLAVE2		0
+#define CONFIG_SYS_HRCW_SLAVE3		0
+#define CONFIG_SYS_HRCW_SLAVE4		0
+#define CONFIG_SYS_HRCW_SLAVE5		0
+#define CONFIG_SYS_HRCW_SLAVE6		0
+#define CONFIG_SYS_HRCW_SLAVE7		0
 
 /*-----------------------------------------------------------------------
  * Internal Memory Mapped Register
  */
-#define CFG_IMMR		0xF0000000
+#define CONFIG_SYS_IMMR		0xF0000000
 
 /*-----------------------------------------------------------------------
  * Definitions for initial stack pointer and data area (in DPRAM)
  */
-#define CFG_INIT_RAM_ADDR	CFG_IMMR
-#define CFG_INIT_RAM_END	0x4000  /* End of used area in DPRAM    */
-#define CFG_GBL_DATA_SIZE	128 /* size in bytes reserved for initial data*/
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_IMMR
+#define CONFIG_SYS_INIT_RAM_END	0x4000  /* End of used area in DPRAM    */
+#define CONFIG_SYS_GBL_DATA_SIZE	128 /* size in bytes reserved for initial data*/
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
 /*-----------------------------------------------------------------------
  * Start addresses for the final memory configuration
  * (Set up by the startup code)
- * Please note that CFG_SDRAM_BASE _must_ start at 0
+ * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
  *
- * 60x SDRAM is mapped at CFG_SDRAM_BASE, local SDRAM
+ * 60x SDRAM is mapped at CONFIG_SYS_SDRAM_BASE, local SDRAM
  * is mapped at SDRAM_BASE2_PRELIM.
  */
-#define CFG_SDRAM_BASE		0x00000000
-#define CFG_FLASH_BASE		CFG_FLASH0_BASE
-#define CFG_MONITOR_BASE	TEXT_BASE
-#define CFG_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor */
-#define CFG_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()*/
+#define CONFIG_SYS_SDRAM_BASE		0x00000000
+#define CONFIG_SYS_FLASH_BASE		CONFIG_SYS_FLASH0_BASE
+#define CONFIG_SYS_MONITOR_BASE	TEXT_BASE
+#define CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor */
+#define CONFIG_SYS_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()*/
 
-#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
-# define CFG_RAMBOOT
+#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
+# define CONFIG_SYS_RAMBOOT
 #endif
 
 #ifdef	CONFIG_PCI
 #define CONFIG_PCI_PNP
 #define CONFIG_EEPRO100
-#define CFG_RX_ETH_BUFFER	8               /* use 8 rx buffer on eepro100  */
+#define CONFIG_SYS_RX_ETH_BUFFER	8               /* use 8 rx buffer on eepro100  */
 #endif
 
 /*
@@ -344,9 +344,9 @@
 /*-----------------------------------------------------------------------
  * Cache Configuration
  */
-#define CFG_CACHELINE_SIZE      32      /* For MPC8260 CPU              */
+#define CONFIG_SYS_CACHELINE_SIZE      32      /* For MPC8260 CPU              */
 #if defined(CONFIG_CMD_KGDB)
-#  define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value */
+#  define CONFIG_SYS_CACHELINE_SHIFT	5	/* log base 2 of the above value */
 #endif
 
 /*-----------------------------------------------------------------------
@@ -359,17 +359,17 @@
  *
  * HID1 has only read-only information - nothing to set.
  */
-#define CFG_HID0_INIT   (HID0_ICE|HID0_DCE|HID0_ICFI|HID0_DCI|\
+#define CONFIG_SYS_HID0_INIT   (HID0_ICE|HID0_DCE|HID0_ICFI|HID0_DCI|\
 				HID0_IFEM|HID0_ABE)
-#define CFG_HID0_FINAL  (HID0_ICE|HID0_IFEM|HID0_ABE)
-#define CFG_HID2        0
+#define CONFIG_SYS_HID0_FINAL  (HID0_ICE|HID0_IFEM|HID0_ABE)
+#define CONFIG_SYS_HID2        0
 
 /*-----------------------------------------------------------------------
  * RMR - Reset Mode Register                                     5-5
  *-----------------------------------------------------------------------
  * turn on Checkstop Reset Enable
  */
-#define CFG_RMR         RMR_CSRE
+#define CONFIG_SYS_RMR         RMR_CSRE
 
 /*-----------------------------------------------------------------------
  * BCR - Bus Configuration                                       4-25
@@ -377,16 +377,16 @@
  */
 
 #define BCR_APD01       0x10000000
-#define CFG_BCR         (BCR_APD01|BCR_ETM|BCR_LETM)    /* 8260 mode */
+#define CONFIG_SYS_BCR         (BCR_APD01|BCR_ETM|BCR_LETM)    /* 8260 mode */
 
 /*-----------------------------------------------------------------------
  * SIUMCR - SIU Module Configuration                             4-31
  *-----------------------------------------------------------------------
  */
 #if 0
-#define CFG_SIUMCR	(SIUMCR_DPPC00|SIUMCR_APPC10|SIUMCR_CS10PC01)
+#define CONFIG_SYS_SIUMCR	(SIUMCR_DPPC00|SIUMCR_APPC10|SIUMCR_CS10PC01)
 #else
-#define CFG_SIUMCR	(SIUMCR_DPPC10|SIUMCR_APPC10)
+#define CONFIG_SYS_SIUMCR	(SIUMCR_DPPC10|SIUMCR_APPC10)
 #endif
 
 
@@ -397,10 +397,10 @@
  * Watchdog & Bus Monitor Timer max, 60x Bus Monitor enable
  */
 #if defined(CONFIG_WATCHDOG)
-#define CFG_SYPCR       (SYPCR_SWTC|SYPCR_BMT|SYPCR_PBME|SYPCR_LBME|\
+#define CONFIG_SYS_SYPCR       (SYPCR_SWTC|SYPCR_BMT|SYPCR_PBME|SYPCR_LBME|\
 			 SYPCR_SWRI|SYPCR_SWP|SYPCR_SWE)
 #else
-#define CFG_SYPCR       (SYPCR_SWTC|SYPCR_BMT|SYPCR_PBME|SYPCR_LBME|\
+#define CONFIG_SYS_SYPCR       (SYPCR_SWTC|SYPCR_BMT|SYPCR_PBME|SYPCR_LBME|\
 			 SYPCR_SWRI|SYPCR_SWP)
 #endif /* CONFIG_WATCHDOG */
 
@@ -410,7 +410,7 @@
  * Clear once per Second and Alarm Interrupt Status, Set 32KHz timersclk,
  * and enable Time Counter
  */
-#define CFG_TMCNTSC     (TMCNTSC_SEC|TMCNTSC_ALR|TMCNTSC_TCF|TMCNTSC_TCE)
+#define CONFIG_SYS_TMCNTSC     (TMCNTSC_SEC|TMCNTSC_ALR|TMCNTSC_TCF|TMCNTSC_TCE)
 
 /*-----------------------------------------------------------------------
  * PISCR - Periodic Interrupt Status and Control                 4-42
@@ -418,19 +418,19 @@
  * Clear Periodic Interrupt Status, Set 32KHz timersclk, and enable
  * Periodic timer
  */
-#define CFG_PISCR       (PISCR_PS|PISCR_PTF|PISCR_PTE)
+#define CONFIG_SYS_PISCR       (PISCR_PS|PISCR_PTF|PISCR_PTE)
 
 /*-----------------------------------------------------------------------
  * SCCR - System Clock Control                                   9-8
  *-----------------------------------------------------------------------
  */
-#define CFG_SCCR        (SCCR_DFBRG00)
+#define CONFIG_SYS_SCCR        (SCCR_DFBRG00)
 
 /*-----------------------------------------------------------------------
  * RCCR - RISC Controller Configuration                         13-7
  *-----------------------------------------------------------------------
  */
-#define CFG_RCCR        0
+#define CONFIG_SYS_RCCR        0
 
 /*
  * Init Memory Controller:
@@ -444,34 +444,34 @@
 
 	/* Initialize SDRAM on local bus
 	 */
-#define CFG_INIT_LOCAL_SDRAM
+#define CONFIG_SYS_INIT_LOCAL_SDRAM
 
 
 /* Minimum mask to separate preliminary
  * address ranges for CS[0:2]
  */
-#define CFG_MIN_AM_MASK	0xC0000000
+#define CONFIG_SYS_MIN_AM_MASK	0xC0000000
 
 /*
  * we use the same values for 32 MB and 128 MB SDRAM
  * refresh rate = 7.73 uS (64 MHz Bus Clock)
  */
-#define CFG_MPTPR       0x2000
-#define CFG_PSRT        0x0E
+#define CONFIG_SYS_MPTPR       0x2000
+#define CONFIG_SYS_PSRT        0x0E
 
-#define CFG_MRS_OFFS	0x00000000
+#define CONFIG_SYS_MRS_OFFS	0x00000000
 
 
 #if defined(CONFIG_BOOT_ROM)
 /*
  * Bank 0 - Boot ROM (8 bit wide)
  */
-#define CFG_BR0_PRELIM	((CFG_BOOTROM_BASE & BRx_BA_MSK)|\
+#define CONFIG_SYS_BR0_PRELIM	((CONFIG_SYS_BOOTROM_BASE & BRx_BA_MSK)|\
 			 BRx_PS_8			|\
 			 BRx_MS_GPCM_P			|\
 			 BRx_V)
 
-#define CFG_OR0_PRELIM	(P2SZ_TO_AM(CFG_BOOTROM_SIZE)	|\
+#define CONFIG_SYS_OR0_PRELIM	(P2SZ_TO_AM(CONFIG_SYS_BOOTROM_SIZE)	|\
 			 ORxG_CSNT			|\
 			 ORxG_ACS_DIV1			|\
 			 ORxG_SCY_3_CLK			|\
@@ -481,12 +481,12 @@
 /*
  * Bank 1 - Flash (64 bit wide)
  */
-#define CFG_BR1_PRELIM	((CFG_FLASH_BASE & BRx_BA_MSK)	|\
+#define CONFIG_SYS_BR1_PRELIM	((CONFIG_SYS_FLASH_BASE & BRx_BA_MSK)	|\
 			 BRx_PS_64			|\
 			 BRx_MS_GPCM_P			|\
 			 BRx_V)
 
-#define CFG_OR1_PRELIM	(P2SZ_TO_AM(CFG_FLASH_SIZE)	|\
+#define CONFIG_SYS_OR1_PRELIM	(P2SZ_TO_AM(CONFIG_SYS_FLASH_SIZE)	|\
 			 ORxG_CSNT			|\
 			 ORxG_ACS_DIV1			|\
 			 ORxG_SCY_3_CLK			|\
@@ -498,12 +498,12 @@
 /*
  * Bank 0 - Flash (64 bit wide)
  */
-#define CFG_BR0_PRELIM  ((CFG_FLASH_BASE & BRx_BA_MSK)  |\
+#define CONFIG_SYS_BR0_PRELIM  ((CONFIG_SYS_FLASH_BASE & BRx_BA_MSK)  |\
 			 BRx_PS_64                      |\
 			 BRx_MS_GPCM_P                  |\
 			 BRx_V)
 
-#define CFG_OR0_PRELIM  (P2SZ_TO_AM(CFG_FLASH_SIZE)	|\
+#define CONFIG_SYS_OR0_PRELIM  (P2SZ_TO_AM(CONFIG_SYS_FLASH_SIZE)	|\
 			 ORxG_CSNT                      |\
 			 ORxG_ACS_DIV1                  |\
 			 ORxG_SCY_3_CLK                 |\
@@ -513,12 +513,12 @@
 /*
  * Bank 1 - Disk-On-Chip
  */
-#define CFG_BR1_PRELIM	((CFG_DOC_BASE & BRx_BA_MSK)	|\
+#define CONFIG_SYS_BR1_PRELIM	((CONFIG_SYS_DOC_BASE & BRx_BA_MSK)	|\
 			 BRx_PS_8			|\
 			 BRx_MS_GPCM_P			|\
 			 BRx_V)
 
-#define CFG_OR1_PRELIM	(P2SZ_TO_AM(CFG_DOC_SIZE)	|\
+#define CONFIG_SYS_OR1_PRELIM	(P2SZ_TO_AM(CONFIG_SYS_DOC_SIZE)	|\
 			 ORxG_CSNT			|\
 			 ORxG_ACS_DIV1			|\
 			 ORxG_SCY_3_CLK			|\
@@ -530,20 +530,20 @@
 /* Bank 2 - SDRAM
  */
 
-#ifndef CFG_RAMBOOT
-#define CFG_BR2_PRELIM  ((CFG_SDRAM_BASE & BRx_BA_MSK)  |\
+#ifndef CONFIG_SYS_RAMBOOT
+#define CONFIG_SYS_BR2_PRELIM  ((CONFIG_SYS_SDRAM_BASE & BRx_BA_MSK)  |\
 			 BRx_PS_64                      |\
 			 BRx_MS_SDRAM_P                 |\
 			 BRx_V)
 
 	/* SDRAM initialization values for 8-column chips
 	 */
-#define CFG_OR2_8COL    (CFG_MIN_AM_MASK	        |\
+#define CONFIG_SYS_OR2_8COL    (CONFIG_SYS_MIN_AM_MASK	        |\
 			 ORxS_BPD_4                     |\
 			 ORxS_ROWST_PBI0_A9             |\
 			 ORxS_NUMR_12)
 
-#define CFG_PSDMR_8COL  (PSDMR_SDAM_A13_IS_A5           |\
+#define CONFIG_SYS_PSDMR_8COL  (PSDMR_SDAM_A13_IS_A5           |\
 			 PSDMR_BSMA_A14_A16             |\
 			 PSDMR_SDA10_PBI0_A10           |\
 			 PSDMR_RFRC_7_CLK               |\
@@ -555,12 +555,12 @@
 
 	/* SDRAM initialization values for 9-column chips
 	 */
-#define CFG_OR2_9COL    (CFG_MIN_AM_MASK                |\
+#define CONFIG_SYS_OR2_9COL    (CONFIG_SYS_MIN_AM_MASK                |\
 			 ORxS_BPD_4                     |\
 			 ORxS_ROWST_PBI0_A7             |\
 			 ORxS_NUMR_13)
 
-#define CFG_PSDMR_9COL  (PSDMR_SDAM_A14_IS_A5           |\
+#define CONFIG_SYS_PSDMR_9COL  (PSDMR_SDAM_A14_IS_A5           |\
 			 PSDMR_BSMA_A13_A15             |\
 			 PSDMR_SDA10_PBI0_A9            |\
 			 PSDMR_RFRC_7_CLK               |\
@@ -570,9 +570,9 @@
 			 PSDMR_WRC_1C                   |\
 			 PSDMR_CL_2)
 
-#define CFG_OR2_PRELIM   CFG_OR2_9COL
-#define CFG_PSDMR        CFG_PSDMR_9COL
+#define CONFIG_SYS_OR2_PRELIM   CONFIG_SYS_OR2_9COL
+#define CONFIG_SYS_PSDMR        CONFIG_SYS_PSDMR_9COL
 
-#endif /* CFG_RAMBOOT */
+#endif /* CONFIG_SYS_RAMBOOT */
 
 #endif	/* __CONFIG_H */
diff --git a/include/configs/PM828.h b/include/configs/PM828.h
index 96c0edf93..96c86f7e9 100644
--- a/include/configs/PM828.h
+++ b/include/configs/PM828.h
@@ -28,7 +28,7 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
-#undef CFG_RAMBOOT
+#undef CONFIG_SYS_RAMBOOT
 
 /*
  * High Level Configuration Options
@@ -55,8 +55,8 @@
 /* enable I2C and select the hardware/software driver */
 #undef	CONFIG_HARD_I2C
 #define CONFIG_SOFT_I2C		1	/* I2C bit-banged		*/
-# define CFG_I2C_SPEED		50000
-# define CFG_I2C_SLAVE		0xFE
+# define CONFIG_SYS_I2C_SPEED		50000
+# define CONFIG_SYS_I2C_SLAVE		0xFE
 /*
  * Software (bit-bang) I2C driver configuration
  */
@@ -72,7 +72,7 @@
 
 
 #define CONFIG_RTC_PCF8563
-#define CFG_I2C_RTC_ADDR	0x51
+#define CONFIG_SYS_I2C_RTC_ADDR	0x51
 
 /*
  * select serial console configuration
@@ -117,25 +117,25 @@
  * - Tx-CLK is CLK10
  */
 #define CONFIG_ETHER_ON_FCC1
-# define CFG_CMXFCR_MASK1	(CMXFCR_FC1|CMXFCR_RF1CS_MSK|CMXFCR_TF1CS_MSK)
+# define CONFIG_SYS_CMXFCR_MASK1	(CMXFCR_FC1|CMXFCR_RF1CS_MSK|CMXFCR_TF1CS_MSK)
 #ifndef CONFIG_DB_CR826_J30x_ON
-# define CFG_CMXFCR_VALUE1	(CMXFCR_RF1CS_CLK11|CMXFCR_TF1CS_CLK10)
+# define CONFIG_SYS_CMXFCR_VALUE1	(CMXFCR_RF1CS_CLK11|CMXFCR_TF1CS_CLK10)
 #else
-# define CFG_CMXFCR_VALUE1	(CMXFCR_RF1CS_CLK11|CMXFCR_TF1CS_CLK12)
+# define CONFIG_SYS_CMXFCR_VALUE1	(CMXFCR_RF1CS_CLK11|CMXFCR_TF1CS_CLK12)
 #endif
 /*
  * - Rx-CLK is CLK15
  * - Tx-CLK is CLK14
  */
 #define CONFIG_ETHER_ON_FCC2
-# define CFG_CMXFCR_MASK2	(CMXFCR_FC2|CMXFCR_RF2CS_MSK|CMXFCR_TF2CS_MSK)
-# define CFG_CMXFCR_VALUE2	(CMXFCR_RF2CS_CLK13|CMXFCR_TF2CS_CLK14)
+# define CONFIG_SYS_CMXFCR_MASK2	(CMXFCR_FC2|CMXFCR_RF2CS_MSK|CMXFCR_TF2CS_MSK)
+# define CONFIG_SYS_CMXFCR_VALUE2	(CMXFCR_RF2CS_CLK13|CMXFCR_TF2CS_CLK14)
 /*
  * - RAM for BD/Buffers is on the 60x Bus (see 28-13)
  * - Enable Full Duplex in FSMR
  */
-# define CFG_CPMFCR_RAMTYPE	0
-# define CFG_FCC_PSMR		(FCC_PSMR_FDE|FCC_PSMR_LPB)
+# define CONFIG_SYS_CPMFCR_RAMTYPE	0
+# define CONFIG_SYS_FCC_PSMR		(FCC_PSMR_FDE|FCC_PSMR_LPB)
 
 /* system clock rate (CLKIN) - equal to the 60x and local bus speed */
 #define CONFIG_8260_CLKIN	100000000	/* in Hz */
@@ -147,7 +147,7 @@
 #endif
 
 #define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
-#undef	CFG_LOADS_BAUD_CHANGE		/* don't allow baudrate change	*/
+#undef	CONFIG_SYS_LOADS_BAUD_CHANGE		/* don't allow baudrate change	*/
 
 #undef	CONFIG_WATCHDOG			/* watchdog disabled		*/
 
@@ -185,144 +185,144 @@
  */
 #define CONFIG_NAND_LEGACY
 
-#define CFG_DOC_SHORT_TIMEOUT
-#define CFG_MAX_DOC_DEVICE	1	/* Max number of DOC devices	*/
+#define CONFIG_SYS_DOC_SHORT_TIMEOUT
+#define CONFIG_SYS_MAX_DOC_DEVICE	1	/* Max number of DOC devices	*/
 
-#define CFG_DOC_SUPPORT_2000
-#define CFG_DOC_SUPPORT_MILLENNIUM
+#define CONFIG_SYS_DOC_SUPPORT_2000
+#define CONFIG_SYS_DOC_SUPPORT_MILLENNIUM
 
 /*
  * Miscellaneous configurable options
  */
-#define CFG_LONGHELP			/* undef to save memory		*/
-#define CFG_PROMPT	"=> "		/* Monitor Command Prompt	*/
+#define CONFIG_SYS_LONGHELP			/* undef to save memory		*/
+#define CONFIG_SYS_PROMPT	"=> "		/* Monitor Command Prompt	*/
 #if defined(CONFIG_CMD_KGDB)
-#define CFG_CBSIZE	1024		/* Console I/O Buffer Size	*/
+#define CONFIG_SYS_CBSIZE	1024		/* Console I/O Buffer Size	*/
 #else
-#define CFG_CBSIZE	256		/* Console I/O Buffer Size	*/
+#define CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size	*/
 #endif
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define CFG_MAXARGS	16		/* max number of command args	*/
-#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS	16		/* max number of command args	*/
+#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
 
-#define CFG_MEMTEST_START	0x0400000	/* memtest works on	*/
-#define CFG_MEMTEST_END 0x0C00000	/* 4 ... 12 MB in DRAM	*/
+#define CONFIG_SYS_MEMTEST_START	0x0400000	/* memtest works on	*/
+#define CONFIG_SYS_MEMTEST_END 0x0C00000	/* 4 ... 12 MB in DRAM	*/
 
-#define CFG_LOAD_ADDR	0x100000	/* default load address */
+#define CONFIG_SYS_LOAD_ADDR	0x100000	/* default load address */
 
-#define CFG_HZ		1000		/* decrementer freq: 1 ms ticks */
+#define CONFIG_SYS_HZ		1000		/* decrementer freq: 1 ms ticks */
 
-#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
 
-#define CFG_RESET_ADDRESS 0xFDFFFFFC	/* "bad" address		*/
+#define CONFIG_SYS_RESET_ADDRESS 0xFDFFFFFC	/* "bad" address		*/
 
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define CFG_BOOTMAPSZ	     (8 << 20)	     /* Initial Memory map for Linux */
+#define CONFIG_SYS_BOOTMAPSZ	     (8 << 20)	     /* Initial Memory map for Linux */
 
 /*-----------------------------------------------------------------------
  * Flash and Boot ROM mapping
  */
 
-#define CFG_BOOTROM_BASE	0xFF800000
-#define CFG_BOOTROM_SIZE	0x00080000
-#define CFG_FLASH0_BASE		0x40000000
-#define CFG_FLASH0_SIZE		0x02000000
-#define CFG_DOC_BASE		0xFF800000
-#define CFG_DOC_SIZE		0x00100000
+#define CONFIG_SYS_BOOTROM_BASE	0xFF800000
+#define CONFIG_SYS_BOOTROM_SIZE	0x00080000
+#define CONFIG_SYS_FLASH0_BASE		0x40000000
+#define CONFIG_SYS_FLASH0_SIZE		0x02000000
+#define CONFIG_SYS_DOC_BASE		0xFF800000
+#define CONFIG_SYS_DOC_SIZE		0x00100000
 
 
 /* Flash bank size (for preliminary settings)
  */
-#define CFG_FLASH_SIZE CFG_FLASH0_SIZE
+#define CONFIG_SYS_FLASH_SIZE CONFIG_SYS_FLASH0_SIZE
 
 /*-----------------------------------------------------------------------
  * FLASH organization
  */
-#define CFG_MAX_FLASH_BANKS	1	/* max num of memory banks	*/
-#define CFG_MAX_FLASH_SECT	135	/* max num of sects on one chip */
+#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max num of memory banks	*/
+#define CONFIG_SYS_MAX_FLASH_SECT	135	/* max num of sects on one chip */
 
-#define CFG_FLASH_ERASE_TOUT	240000	/* Flash Erase Timeout (in ms)	*/
-#define CFG_FLASH_WRITE_TOUT	500	/* Flash Write Timeout (in ms)	*/
+#define CONFIG_SYS_FLASH_ERASE_TOUT	240000	/* Flash Erase Timeout (in ms)	*/
+#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Flash Write Timeout (in ms)	*/
 
 #if 0
 /* Start port with environment in flash; switch to EEPROM later */
-#define CFG_ENV_IS_IN_FLASH	1
-#define CFG_ENV_ADDR		(CFG_FLASH_BASE+0x40000)
-#define CFG_ENV_SIZE		0x40000
-#define CFG_ENV_SECT_SIZE	0x40000
+#define CONFIG_ENV_IS_IN_FLASH	1
+#define CONFIG_ENV_ADDR		(CONFIG_SYS_FLASH_BASE+0x40000)
+#define CONFIG_ENV_SIZE		0x40000
+#define CONFIG_ENV_SECT_SIZE	0x40000
 #else
 /* Final version: environment in EEPROM */
-#define CFG_ENV_IS_IN_EEPROM	1
-#define CFG_I2C_EEPROM_ADDR	0x58
-#define CFG_I2C_EEPROM_ADDR_LEN 1
-#define CFG_EEPROM_PAGE_WRITE_BITS	4
-#define CFG_EEPROM_PAGE_WRITE_DELAY_MS	10	/* and takes up to 10 msec */
-#define CFG_ENV_OFFSET		512
-#define CFG_ENV_SIZE		(2048 - 512)
+#define CONFIG_ENV_IS_IN_EEPROM	1
+#define CONFIG_SYS_I2C_EEPROM_ADDR	0x58
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS	4
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	10	/* and takes up to 10 msec */
+#define CONFIG_ENV_OFFSET		512
+#define CONFIG_ENV_SIZE		(2048 - 512)
 #endif
 
 /*-----------------------------------------------------------------------
  * Hard Reset Configuration Words
  *
- * if you change bits in the HRCW, you must also change the CFG_*
+ * if you change bits in the HRCW, you must also change the CONFIG_SYS_*
  * defines for the various registers affected by the HRCW e.g. changing
- * HRCW_DPPCxx requires you to also change CFG_SIUMCR.
+ * HRCW_DPPCxx requires you to also change CONFIG_SYS_SIUMCR.
  */
 #if defined(CONFIG_BOOT_ROM)
-#define CFG_HRCW_MASTER		(HRCW_BPS01 | HRCW_CIP | HRCW_ISB100 | HRCW_BMS)
+#define CONFIG_SYS_HRCW_MASTER		(HRCW_BPS01 | HRCW_CIP | HRCW_ISB100 | HRCW_BMS)
 #else
-#define CFG_HRCW_MASTER		(HRCW_CIP | HRCW_ISB100 | HRCW_BMS)
+#define CONFIG_SYS_HRCW_MASTER		(HRCW_CIP | HRCW_ISB100 | HRCW_BMS)
 #endif
 
 /* no slaves so just fill with zeros */
-#define CFG_HRCW_SLAVE1		0
-#define CFG_HRCW_SLAVE2		0
-#define CFG_HRCW_SLAVE3		0
-#define CFG_HRCW_SLAVE4		0
-#define CFG_HRCW_SLAVE5		0
-#define CFG_HRCW_SLAVE6		0
-#define CFG_HRCW_SLAVE7		0
+#define CONFIG_SYS_HRCW_SLAVE1		0
+#define CONFIG_SYS_HRCW_SLAVE2		0
+#define CONFIG_SYS_HRCW_SLAVE3		0
+#define CONFIG_SYS_HRCW_SLAVE4		0
+#define CONFIG_SYS_HRCW_SLAVE5		0
+#define CONFIG_SYS_HRCW_SLAVE6		0
+#define CONFIG_SYS_HRCW_SLAVE7		0
 
 /*-----------------------------------------------------------------------
  * Internal Memory Mapped Register
  */
-#define CFG_IMMR		0xF0000000
+#define CONFIG_SYS_IMMR		0xF0000000
 
 /*-----------------------------------------------------------------------
  * Definitions for initial stack pointer and data area (in DPRAM)
  */
-#define CFG_INIT_RAM_ADDR	CFG_IMMR
-#define CFG_INIT_RAM_END	0x4000	/* End of used area in DPRAM	*/
-#define CFG_GBL_DATA_SIZE	128 /* size in bytes reserved for initial data*/
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_IMMR
+#define CONFIG_SYS_INIT_RAM_END	0x4000	/* End of used area in DPRAM	*/
+#define CONFIG_SYS_GBL_DATA_SIZE	128 /* size in bytes reserved for initial data*/
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
 /*-----------------------------------------------------------------------
  * Start addresses for the final memory configuration
  * (Set up by the startup code)
- * Please note that CFG_SDRAM_BASE _must_ start at 0
+ * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
  *
- * 60x SDRAM is mapped at CFG_SDRAM_BASE, local SDRAM
+ * 60x SDRAM is mapped at CONFIG_SYS_SDRAM_BASE, local SDRAM
  * is mapped at SDRAM_BASE2_PRELIM.
  */
-#define CFG_SDRAM_BASE		0x00000000
-#define CFG_FLASH_BASE		CFG_FLASH0_BASE
-#define CFG_MONITOR_BASE	TEXT_BASE
-#define CFG_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor */
-#define CFG_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()*/
+#define CONFIG_SYS_SDRAM_BASE		0x00000000
+#define CONFIG_SYS_FLASH_BASE		CONFIG_SYS_FLASH0_BASE
+#define CONFIG_SYS_MONITOR_BASE	TEXT_BASE
+#define CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor */
+#define CONFIG_SYS_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()*/
 
-#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
-# define CFG_RAMBOOT
+#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
+# define CONFIG_SYS_RAMBOOT
 #endif
 
 #ifdef	CONFIG_PCI
 #define CONFIG_PCI_PNP
 #define CONFIG_EEPRO100
-#define CFG_RX_ETH_BUFFER	8		/* use 8 rx buffer on eepro100	*/
+#define CONFIG_SYS_RX_ETH_BUFFER	8		/* use 8 rx buffer on eepro100	*/
 #endif
 
 /*
@@ -337,9 +337,9 @@
 /*-----------------------------------------------------------------------
  * Cache Configuration
  */
-#define CFG_CACHELINE_SIZE	32	/* For MPC8260 CPU		*/
+#define CONFIG_SYS_CACHELINE_SIZE	32	/* For MPC8260 CPU		*/
 #if defined(CONFIG_CMD_KGDB)
-#  define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value */
+#  define CONFIG_SYS_CACHELINE_SHIFT	5	/* log base 2 of the above value */
 #endif
 
 /*-----------------------------------------------------------------------
@@ -352,17 +352,17 @@
  *
  * HID1 has only read-only information - nothing to set.
  */
-#define CFG_HID0_INIT	(HID0_ICE|HID0_DCE|HID0_ICFI|HID0_DCI|\
+#define CONFIG_SYS_HID0_INIT	(HID0_ICE|HID0_DCE|HID0_ICFI|HID0_DCI|\
 				HID0_IFEM|HID0_ABE)
-#define CFG_HID0_FINAL	(HID0_ICE|HID0_IFEM|HID0_ABE)
-#define CFG_HID2	0
+#define CONFIG_SYS_HID0_FINAL	(HID0_ICE|HID0_IFEM|HID0_ABE)
+#define CONFIG_SYS_HID2	0
 
 /*-----------------------------------------------------------------------
  * RMR - Reset Mode Register					 5-5
  *-----------------------------------------------------------------------
  * turn on Checkstop Reset Enable
  */
-#define CFG_RMR		RMR_CSRE
+#define CONFIG_SYS_RMR		RMR_CSRE
 
 /*-----------------------------------------------------------------------
  * BCR - Bus Configuration					 4-25
@@ -370,16 +370,16 @@
  */
 
 #define BCR_APD01	0x10000000
-#define CFG_BCR		(BCR_APD01|BCR_ETM|BCR_LETM)	/* 8260 mode */
+#define CONFIG_SYS_BCR		(BCR_APD01|BCR_ETM|BCR_LETM)	/* 8260 mode */
 
 /*-----------------------------------------------------------------------
  * SIUMCR - SIU Module Configuration				 4-31
  *-----------------------------------------------------------------------
  */
 #if 0
-#define CFG_SIUMCR	(SIUMCR_DPPC00|SIUMCR_APPC10|SIUMCR_CS10PC01)
+#define CONFIG_SYS_SIUMCR	(SIUMCR_DPPC00|SIUMCR_APPC10|SIUMCR_CS10PC01)
 #else
-#define CFG_SIUMCR	(SIUMCR_DPPC10|SIUMCR_APPC10)
+#define CONFIG_SYS_SIUMCR	(SIUMCR_DPPC10|SIUMCR_APPC10)
 #endif
 
 
@@ -390,10 +390,10 @@
  * Watchdog & Bus Monitor Timer max, 60x Bus Monitor enable
  */
 #if defined(CONFIG_WATCHDOG)
-#define CFG_SYPCR	(SYPCR_SWTC|SYPCR_BMT|SYPCR_PBME|SYPCR_LBME|\
+#define CONFIG_SYS_SYPCR	(SYPCR_SWTC|SYPCR_BMT|SYPCR_PBME|SYPCR_LBME|\
 			 SYPCR_SWRI|SYPCR_SWP|SYPCR_SWE)
 #else
-#define CFG_SYPCR	(SYPCR_SWTC|SYPCR_BMT|SYPCR_PBME|SYPCR_LBME|\
+#define CONFIG_SYS_SYPCR	(SYPCR_SWTC|SYPCR_BMT|SYPCR_PBME|SYPCR_LBME|\
 			 SYPCR_SWRI|SYPCR_SWP)
 #endif /* CONFIG_WATCHDOG */
 
@@ -403,7 +403,7 @@
  * Clear once per Second and Alarm Interrupt Status, Set 32KHz timersclk,
  * and enable Time Counter
  */
-#define CFG_TMCNTSC	(TMCNTSC_SEC|TMCNTSC_ALR|TMCNTSC_TCF|TMCNTSC_TCE)
+#define CONFIG_SYS_TMCNTSC	(TMCNTSC_SEC|TMCNTSC_ALR|TMCNTSC_TCF|TMCNTSC_TCE)
 
 /*-----------------------------------------------------------------------
  * PISCR - Periodic Interrupt Status and Control		 4-42
@@ -411,19 +411,19 @@
  * Clear Periodic Interrupt Status, Set 32KHz timersclk, and enable
  * Periodic timer
  */
-#define CFG_PISCR	(PISCR_PS|PISCR_PTF|PISCR_PTE)
+#define CONFIG_SYS_PISCR	(PISCR_PS|PISCR_PTF|PISCR_PTE)
 
 /*-----------------------------------------------------------------------
  * SCCR - System Clock Control					 9-8
  *-----------------------------------------------------------------------
  */
-#define CFG_SCCR	(SCCR_DFBRG00)
+#define CONFIG_SYS_SCCR	(SCCR_DFBRG00)
 
 /*-----------------------------------------------------------------------
  * RCCR - RISC Controller Configuration				13-7
  *-----------------------------------------------------------------------
  */
-#define CFG_RCCR	0
+#define CONFIG_SYS_RCCR	0
 
 /*
  * Init Memory Controller:
@@ -437,34 +437,34 @@
 
 	/* Initialize SDRAM on local bus
 	 */
-#define CFG_INIT_LOCAL_SDRAM
+#define CONFIG_SYS_INIT_LOCAL_SDRAM
 
 
 /* Minimum mask to separate preliminary
  * address ranges for CS[0:2]
  */
-#define CFG_MIN_AM_MASK 0xC0000000
+#define CONFIG_SYS_MIN_AM_MASK 0xC0000000
 
 /*
  * we use the same values for 32 MB and 128 MB SDRAM
  * refresh rate = 7.68 uS (100 MHz Bus Clock)
  */
-#define CFG_MPTPR	0x2000
-#define CFG_PSRT	0x16
+#define CONFIG_SYS_MPTPR	0x2000
+#define CONFIG_SYS_PSRT	0x16
 
-#define CFG_MRS_OFFS	0x00000000
+#define CONFIG_SYS_MRS_OFFS	0x00000000
 
 
 #if defined(CONFIG_BOOT_ROM)
 /*
  * Bank 0 - Boot ROM (8 bit wide)
  */
-#define CFG_BR0_PRELIM	((CFG_BOOTROM_BASE & BRx_BA_MSK)|\
+#define CONFIG_SYS_BR0_PRELIM	((CONFIG_SYS_BOOTROM_BASE & BRx_BA_MSK)|\
 			 BRx_PS_8			|\
 			 BRx_MS_GPCM_P			|\
 			 BRx_V)
 
-#define CFG_OR0_PRELIM	(P2SZ_TO_AM(CFG_BOOTROM_SIZE)	|\
+#define CONFIG_SYS_OR0_PRELIM	(P2SZ_TO_AM(CONFIG_SYS_BOOTROM_SIZE)	|\
 			 ORxG_CSNT			|\
 			 ORxG_ACS_DIV1			|\
 			 ORxG_SCY_5_CLK			|\
@@ -474,12 +474,12 @@
 /*
  * Bank 1 - Flash (64 bit wide)
  */
-#define CFG_BR1_PRELIM	((CFG_FLASH_BASE & BRx_BA_MSK)	|\
+#define CONFIG_SYS_BR1_PRELIM	((CONFIG_SYS_FLASH_BASE & BRx_BA_MSK)	|\
 			 BRx_PS_64			|\
 			 BRx_MS_GPCM_P			|\
 			 BRx_V)
 
-#define CFG_OR1_PRELIM	(P2SZ_TO_AM(CFG_FLASH_SIZE)	|\
+#define CONFIG_SYS_OR1_PRELIM	(P2SZ_TO_AM(CONFIG_SYS_FLASH_SIZE)	|\
 			 ORxG_CSNT			|\
 			 ORxG_ACS_DIV1			|\
 			 ORxG_SCY_5_CLK			|\
@@ -491,12 +491,12 @@
 /*
  * Bank 0 - Flash (64 bit wide)
  */
-#define CFG_BR0_PRELIM	((CFG_FLASH_BASE & BRx_BA_MSK)	|\
+#define CONFIG_SYS_BR0_PRELIM	((CONFIG_SYS_FLASH_BASE & BRx_BA_MSK)	|\
 			 BRx_PS_64			|\
 			 BRx_MS_GPCM_P			|\
 			 BRx_V)
 
-#define CFG_OR0_PRELIM	(P2SZ_TO_AM(CFG_FLASH_SIZE)	|\
+#define CONFIG_SYS_OR0_PRELIM	(P2SZ_TO_AM(CONFIG_SYS_FLASH_SIZE)	|\
 			 ORxG_CSNT			|\
 			 ORxG_ACS_DIV1			|\
 			 ORxG_SCY_5_CLK			|\
@@ -506,12 +506,12 @@
 /*
  * Bank 1 - Disk-On-Chip
  */
-#define CFG_BR1_PRELIM	((CFG_DOC_BASE & BRx_BA_MSK)	|\
+#define CONFIG_SYS_BR1_PRELIM	((CONFIG_SYS_DOC_BASE & BRx_BA_MSK)	|\
 			 BRx_PS_8			|\
 			 BRx_MS_GPCM_P			|\
 			 BRx_V)
 
-#define CFG_OR1_PRELIM	(P2SZ_TO_AM(CFG_DOC_SIZE)	|\
+#define CONFIG_SYS_OR1_PRELIM	(P2SZ_TO_AM(CONFIG_SYS_DOC_SIZE)	|\
 			 ORxG_CSNT			|\
 			 ORxG_ACS_DIV1			|\
 			 ORxG_SCY_5_CLK			|\
@@ -523,20 +523,20 @@
 /* Bank 2 - SDRAM
  */
 
-#ifndef CFG_RAMBOOT
-#define CFG_BR2_PRELIM	((CFG_SDRAM_BASE & BRx_BA_MSK)	|\
+#ifndef CONFIG_SYS_RAMBOOT
+#define CONFIG_SYS_BR2_PRELIM	((CONFIG_SYS_SDRAM_BASE & BRx_BA_MSK)	|\
 			 BRx_PS_64			|\
 			 BRx_MS_SDRAM_P			|\
 			 BRx_V)
 
 	/* SDRAM initialization values for 8-column chips
 	 */
-#define CFG_OR2_8COL	(CFG_MIN_AM_MASK		|\
+#define CONFIG_SYS_OR2_8COL	(CONFIG_SYS_MIN_AM_MASK		|\
 			 ORxS_BPD_4			|\
 			 ORxS_ROWST_PBI0_A9		|\
 			 ORxS_NUMR_12)
 
-#define CFG_PSDMR_8COL	(PSDMR_SDAM_A13_IS_A5		|\
+#define CONFIG_SYS_PSDMR_8COL	(PSDMR_SDAM_A13_IS_A5		|\
 			 PSDMR_BSMA_A14_A16		|\
 			 PSDMR_SDA10_PBI0_A10		|\
 			 PSDMR_RFRC_7_CLK		|\
@@ -548,12 +548,12 @@
 
 	/* SDRAM initialization values for 9-column chips
 	 */
-#define CFG_OR2_9COL	(CFG_MIN_AM_MASK		|\
+#define CONFIG_SYS_OR2_9COL	(CONFIG_SYS_MIN_AM_MASK		|\
 			 ORxS_BPD_4			|\
 			 ORxS_ROWST_PBI0_A7		|\
 			 ORxS_NUMR_13)
 
-#define CFG_PSDMR_9COL	(PSDMR_SDAM_A14_IS_A5		|\
+#define CONFIG_SYS_PSDMR_9COL	(PSDMR_SDAM_A14_IS_A5		|\
 			 PSDMR_BSMA_A13_A15		|\
 			 PSDMR_SDA10_PBI0_A9		|\
 			 PSDMR_RFRC_7_CLK		|\
@@ -563,9 +563,9 @@
 			 PSDMR_WRC_1C			|\
 			 PSDMR_CL_2)
 
-#define CFG_OR2_PRELIM	 CFG_OR2_9COL
-#define CFG_PSDMR	 CFG_PSDMR_9COL
+#define CONFIG_SYS_OR2_PRELIM	 CONFIG_SYS_OR2_9COL
+#define CONFIG_SYS_PSDMR	 CONFIG_SYS_PSDMR_9COL
 
-#endif /* CFG_RAMBOOT */
+#endif /* CONFIG_SYS_RAMBOOT */
 
 #endif	/* __CONFIG_H */
diff --git a/include/configs/PM854.h b/include/configs/PM854.h
index aa6095fa0..41e290d0b 100644
--- a/include/configs/PM854.h
+++ b/include/configs/PM854.h
@@ -71,23 +71,22 @@
  */
 #define CONFIG_L2_CACHE			/* toggle L2 cache */
 #define CONFIG_BTB			/* toggle branch predition */
-#define CONFIG_ADDR_STREAMING		/* toggle addr streaming */
 
 #define CONFIG_BOARD_EARLY_INIT_F	1	/* Call board_pre_init */
 
-#undef	CFG_DRAM_TEST			/* memory test, takes time */
-#define CFG_MEMTEST_START	0x00200000	/* memtest region */
-#define CFG_MEMTEST_END		0x00400000
+#undef	CONFIG_SYS_DRAM_TEST			/* memory test, takes time */
+#define CONFIG_SYS_MEMTEST_START	0x00200000	/* memtest region */
+#define CONFIG_SYS_MEMTEST_END		0x00400000
 
 
 /*
  * Base addresses -- Note these are effective addresses where the
  * actual resources get mapped (not physical addresses)
  */
-#define CFG_CCSRBAR_DEFAULT	0xff700000	/* CCSRBAR Default */
-#define CFG_CCSRBAR		0xe0000000	/* relocated CCSRBAR */
-#define CFG_CCSRBAR_PHYS	CFG_CCSRBAR	/* physical addr of CCSRBAR */
-#define CFG_IMMR		CFG_CCSRBAR	/* PQII uses CFG_IMMR */
+#define CONFIG_SYS_CCSRBAR_DEFAULT	0xff700000	/* CCSRBAR Default */
+#define CONFIG_SYS_CCSRBAR		0xe0000000	/* relocated CCSRBAR */
+#define CONFIG_SYS_CCSRBAR_PHYS	CONFIG_SYS_CCSRBAR	/* physical addr of CCSRBAR */
+#define CONFIG_SYS_IMMR		CONFIG_SYS_CCSRBAR	/* PQII uses CONFIG_SYS_IMMR */
 
 
 /* DDR Setup */
@@ -100,8 +99,8 @@
 
 #define CONFIG_MEM_INIT_VALUE	0xDeadBeef
 
-#define CFG_DDR_SDRAM_BASE	0x00000000
-#define CFG_SDRAM_BASE		CFG_DDR_SDRAM_BASE
+#define CONFIG_SYS_DDR_SDRAM_BASE	0x00000000
+#define CONFIG_SYS_SDRAM_BASE		CONFIG_SYS_DDR_SDRAM_BASE
 #define CONFIG_VERY_BIG_RAM
 
 #define CONFIG_NUM_DDR_CONTROLLERS	1
@@ -112,85 +111,84 @@
 #define SPD_EEPROM_ADDRESS	0x58	/* CTLR 0 DIMM 0 */
 
 /* Manually set up DDR parameters */
-#define CFG_SDRAM_SIZE	256		/* DDR is 256 MB */
-#define CFG_DDR_CS0_BNDS	0x0000000f	/* 0-256MB */
-#define CFG_DDR_CS0_CONFIG	0x80000102
-#define CFG_DDR_TIMING_1	0x47444321
-#define CFG_DDR_TIMING_2	0x00000800	/* P9-45,may need tuning */
-#define CFG_DDR_CONTROL	0xc2008000	/* unbuffered,no DYN_PWR */
-#define CFG_DDR_MODE	0x00000062	/* DLL,normal,seq,4/2.5 */
-#define CFG_DDR_INTERVAL	0x045b0100	/* autocharge,no open page */
+#define CONFIG_SYS_SDRAM_SIZE	256		/* DDR is 256 MB */
+#define CONFIG_SYS_DDR_CS0_BNDS	0x0000000f	/* 0-256MB */
+#define CONFIG_SYS_DDR_CS0_CONFIG	0x80000102
+#define CONFIG_SYS_DDR_TIMING_1	0x47444321
+#define CONFIG_SYS_DDR_TIMING_2	0x00000800	/* P9-45,may need tuning */
+#define CONFIG_SYS_DDR_CONTROL	0xc2008000	/* unbuffered,no DYN_PWR */
+#define CONFIG_SYS_DDR_MODE	0x00000062	/* DLL,normal,seq,4/2.5 */
+#define CONFIG_SYS_DDR_INTERVAL	0x045b0100	/* autocharge,no open page */
 
 /*
  * SDRAM on the Local Bus
  */
-#define CFG_LBC_SDRAM_BASE	0xf0000000	/* Localbus SDRAM */
-#define CFG_LBC_SDRAM_SIZE	0		/* LBC SDRAM is 0 MB */
+#define CONFIG_SYS_LBC_SDRAM_BASE	0xf0000000	/* Localbus SDRAM */
+#define CONFIG_SYS_LBC_SDRAM_SIZE	0		/* LBC SDRAM is 0 MB */
 
-#define CFG_FLASH_BASE		0xfe000000	/* start of 32 MB FLASH */
-#define CFG_BR0_PRELIM		0xfe001801	/* port size 32bit */
+#define CONFIG_SYS_FLASH_BASE		0xfe000000	/* start of 32 MB FLASH */
+#define CONFIG_SYS_BR0_PRELIM		0xfe001801	/* port size 32bit */
 
-#define CFG_OR0_PRELIM		0xfe006f67	/* 32 MB Flash */
-#define CFG_MAX_FLASH_BANKS	1		/* number of banks */
-#define CFG_MAX_FLASH_SECT	128		/* sectors per device */
-#undef	CFG_FLASH_CHECKSUM
-#define CFG_FLASH_ERASE_TOUT	60000	/* Flash Erase Timeout (ms) */
-#define CFG_FLASH_WRITE_TOUT	500	/* Flash Write Timeout (ms) */
+#define CONFIG_SYS_OR0_PRELIM		0xfe006f67	/* 32 MB Flash */
+#define CONFIG_SYS_MAX_FLASH_BANKS	1		/* number of banks */
+#define CONFIG_SYS_MAX_FLASH_SECT	128		/* sectors per device */
+#undef	CONFIG_SYS_FLASH_CHECKSUM
+#define CONFIG_SYS_FLASH_ERASE_TOUT	60000	/* Flash Erase Timeout (ms) */
+#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Flash Write Timeout (ms) */
 
-#define CFG_MONITOR_BASE	TEXT_BASE	/* start of monitor */
+#define CONFIG_SYS_MONITOR_BASE	TEXT_BASE	/* start of monitor */
 
 
-#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
-#define CFG_RAMBOOT
+#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
+#define CONFIG_SYS_RAMBOOT
 #else
-#undef	CFG_RAMBOOT
+#undef	CONFIG_SYS_RAMBOOT
 #endif
 
 #define CONFIG_FLASH_CFI_DRIVER
-#define CFG_FLASH_CFI
-#define CFG_FLASH_EMPTY_INFO
+#define CONFIG_SYS_FLASH_CFI
+#define CONFIG_SYS_FLASH_EMPTY_INFO
 
 #undef CONFIG_CLOCKS_IN_MHZ
 
 /*
  * Local Bus Definitions
  */
-#define CFG_LBC_LCRR		0x00030004    /* LB clock ratio reg */
-#define CFG_LBC_LBCR		0x00000000    /* LB config reg */
-#define CFG_LBC_LSRT		0x20000000    /* LB sdram refresh timer */
-#define CFG_LBC_MRTPR		0x20000000    /* LB refresh timer prescal*/
+#define CONFIG_SYS_LBC_LCRR		0x00030004    /* LB clock ratio reg */
+#define CONFIG_SYS_LBC_LBCR		0x00000000    /* LB config reg */
+#define CONFIG_SYS_LBC_LSRT		0x20000000    /* LB sdram refresh timer */
+#define CONFIG_SYS_LBC_MRTPR		0x20000000    /* LB refresh timer prescal*/
 
 
-#define CONFIG_L1_INIT_RAM
-#define CFG_INIT_RAM_LOCK	1
-#define CFG_INIT_RAM_ADDR	0xe4010000	/* Initial RAM address */
-#define CFG_INIT_RAM_END	0x4000		/* End of used area in RAM */
+#define CONFIG_SYS_INIT_RAM_LOCK	1
+#define CONFIG_SYS_INIT_RAM_ADDR	0xe4010000	/* Initial RAM address */
+#define CONFIG_SYS_INIT_RAM_END	0x4000		/* End of used area in RAM */
 
-#define CFG_GBL_DATA_SIZE	128		/* num bytes initial data */
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_GBL_DATA_SIZE	128		/* num bytes initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
-#define CFG_MONITOR_LEN		(512 * 1024)	/* Reserve 512 kB for Mon */
-#define CFG_MALLOC_LEN		(128 * 1024)	/* Reserved for malloc */
+#define CONFIG_SYS_MONITOR_LEN		(512 * 1024)	/* Reserve 512 kB for Mon */
+#define CONFIG_SYS_MALLOC_LEN		(128 * 1024)	/* Reserved for malloc */
 
 /* Serial Port */
 #define CONFIG_CONS_INDEX     1
 #undef	CONFIG_SERIAL_SOFTWARE_FIFO
-#define CFG_NS16550
-#define CFG_NS16550_SERIAL
-#define CFG_NS16550_REG_SIZE	1
-#define CFG_NS16550_CLK		get_bus_freq(0)
+#define CONFIG_SYS_NS16550
+#define CONFIG_SYS_NS16550_SERIAL
+#define CONFIG_SYS_NS16550_REG_SIZE	1
+#define CONFIG_SYS_NS16550_CLK		get_bus_freq(0)
 
-#define CFG_BAUDRATE_TABLE  \
+#define CONFIG_SYS_BAUDRATE_TABLE  \
 	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200}
 
-#define CFG_NS16550_COM1	(CFG_CCSRBAR+0x4500)
-#define CFG_NS16550_COM2	(CFG_CCSRBAR+0x4600)
+#define CONFIG_SYS_NS16550_COM1	(CONFIG_SYS_CCSRBAR+0x4500)
+#define CONFIG_SYS_NS16550_COM2	(CONFIG_SYS_CCSRBAR+0x4600)
 
 /* Use the HUSH parser */
-#define CFG_HUSH_PARSER
-#ifdef	CFG_HUSH_PARSER
-#define CFG_PROMPT_HUSH_PS2 "> "
+#define CONFIG_SYS_HUSH_PARSER
+#ifdef	CONFIG_SYS_HUSH_PARSER
+#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
 #endif
 
 /*
@@ -199,40 +197,40 @@
 #define CONFIG_FSL_I2C		/* Use FSL common I2C driver */
 #define CONFIG_HARD_I2C		/* I2C with hardware support*/
 #undef	CONFIG_SOFT_I2C			/* I2C bit-banged */
-#define CFG_I2C_SPEED		400000	/* I2C speed and slave address */
-#define CFG_I2C_SLAVE		0x7F
-#define CFG_I2C_NOPROBES	{0x69}	/* Don't probe these addrs */
-#define CFG_I2C_OFFSET		0x3000
+#define CONFIG_SYS_I2C_SPEED		400000	/* I2C speed and slave address */
+#define CONFIG_SYS_I2C_SLAVE		0x7F
+#define CONFIG_SYS_I2C_NOPROBES	{0x69}	/* Don't probe these addrs */
+#define CONFIG_SYS_I2C_OFFSET		0x3000
 
 /*
  * EEPROM configuration
  */
-#define CFG_I2C_EEPROM_ADDR		0x58
-#define CFG_I2C_EEPROM_ADDR_LEN		1
-#define CFG_EEPROM_PAGE_WRITE_BITS	4
-#define CFG_EEPROM_PAGE_WRITE_DELAY_MS	10
+#define CONFIG_SYS_I2C_EEPROM_ADDR		0x58
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN		1
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS	4
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	10
 
 /*
  * RTC configuration
  */
 #define CONFIG_RTC_PCF8563
-#define CFG_I2C_RTC_ADDR		0x51
+#define CONFIG_SYS_I2C_RTC_ADDR		0x51
 
 /* RapidIO MMU */
-#define CFG_RIO_MEM_BASE	0xc0000000	/* base address */
-#define CFG_RIO_MEM_PHYS	CFG_RIO_MEM_BASE
-#define CFG_RIO_MEM_SIZE	0x20000000	/* 128M */
+#define CONFIG_SYS_RIO_MEM_BASE	0xc0000000	/* base address */
+#define CONFIG_SYS_RIO_MEM_PHYS	CONFIG_SYS_RIO_MEM_BASE
+#define CONFIG_SYS_RIO_MEM_SIZE	0x20000000	/* 128M */
 
 /*
  * General PCI
  * Addresses are mapped 1-1.
  */
-#define CFG_PCI1_MEM_BASE	0x80000000
-#define CFG_PCI1_MEM_PHYS	CFG_PCI1_MEM_BASE
-#define CFG_PCI1_MEM_SIZE	0x20000000	/* 512M */
-#define CFG_PCI1_IO_BASE	0xe2000000
-#define CFG_PCI1_IO_PHYS	CFG_PCI1_IO_BASE
-#define CFG_PCI1_IO_SIZE	0x1000000	/* 16M */
+#define CONFIG_SYS_PCI1_MEM_BASE	0x80000000
+#define CONFIG_SYS_PCI1_MEM_PHYS	CONFIG_SYS_PCI1_MEM_BASE
+#define CONFIG_SYS_PCI1_MEM_SIZE	0x20000000	/* 512M */
+#define CONFIG_SYS_PCI1_IO_BASE	0xe2000000
+#define CONFIG_SYS_PCI1_IO_PHYS	CONFIG_SYS_PCI1_IO_BASE
+#define CONFIG_SYS_PCI1_IO_SIZE	0x1000000	/* 16M */
 
 #if defined(CONFIG_PCI)
 
@@ -250,7 +248,7 @@
 #endif
 
 #undef CONFIG_PCI_SCAN_SHOW		/* show pci devices on startup */
-#define CFG_PCI_SUBSYS_VENDORID 0x1057	/* Motorola */
+#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x1057	/* Motorola */
 
 #endif	/* CONFIG_PCI */
 
@@ -292,20 +290,20 @@
 /*
  * Environment
  */
-#ifndef CFG_RAMBOOT
-  #define CFG_ENV_IS_IN_FLASH	1
-  #define CFG_ENV_ADDR		(CFG_MONITOR_BASE - 0x80000)
-  #define CFG_ENV_SECT_SIZE	0x40000 /* 256K(one sector) for env */
-  #define CFG_ENV_SIZE		0x2000
+#ifndef CONFIG_SYS_RAMBOOT
+  #define CONFIG_ENV_IS_IN_FLASH	1
+  #define CONFIG_ENV_ADDR		(CONFIG_SYS_MONITOR_BASE - 0x80000)
+  #define CONFIG_ENV_SECT_SIZE	0x40000 /* 256K(one sector) for env */
+  #define CONFIG_ENV_SIZE		0x2000
 #else
-  #define CFG_NO_FLASH		1	/* Flash is not usable now */
-  #define CFG_ENV_IS_NOWHERE	1	/* Store ENV in memory only */
-  #define CFG_ENV_ADDR		(CFG_MONITOR_BASE - 0x1000)
-  #define CFG_ENV_SIZE		0x2000
+  #define CONFIG_SYS_NO_FLASH		1	/* Flash is not usable now */
+  #define CONFIG_ENV_IS_NOWHERE	1	/* Store ENV in memory only */
+  #define CONFIG_ENV_ADDR		(CONFIG_SYS_MONITOR_BASE - 0x1000)
+  #define CONFIG_ENV_SIZE		0x2000
 #endif
 
 #define CONFIG_LOADS_ECHO	1	/* echo on for serial download */
-#define CFG_LOADS_BAUD_CHANGE	1	/* allow baudrate change */
+#define CONFIG_SYS_LOADS_BAUD_CHANGE	1	/* allow baudrate change */
 
 
 /*
@@ -332,7 +330,7 @@
     #define CONFIG_CMD_PCI
 #endif
 
-#if defined(CFG_RAMBOOT)
+#if defined(CONFIG_SYS_RAMBOOT)
     #undef CONFIG_CMD_ENV
     #undef CONFIG_CMD_LOADS
 #endif
@@ -343,20 +341,20 @@
 /*
  * Miscellaneous configurable options
  */
-#define CFG_LONGHELP			/* undef to save memory */
-#define CFG_LOAD_ADDR	0x2000000	/* default load address */
-#define CFG_PROMPT	"=> "		/* Monitor Command Prompt */
+#define CONFIG_SYS_LONGHELP			/* undef to save memory */
+#define CONFIG_SYS_LOAD_ADDR	0x2000000	/* default load address */
+#define CONFIG_SYS_PROMPT	"=> "		/* Monitor Command Prompt */
 
 #if defined(CONFIG_CMD_KGDB)
-    #define CFG_CBSIZE	1024		/* Console I/O Buffer Size */
+    #define CONFIG_SYS_CBSIZE	1024		/* Console I/O Buffer Size */
 #else
-    #define CFG_CBSIZE	256		/* Console I/O Buffer Size */
+    #define CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size */
 #endif
 
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define CFG_MAXARGS	16		/* max number of command args */
-#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size */
-#define CFG_HZ		1000		/* decrementer freq: 1ms ticks */
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS	16		/* max number of command args */
+#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size */
+#define CONFIG_SYS_HZ		1000		/* decrementer freq: 1ms ticks */
 #define CONFIG_LOOPW
 
 /*
@@ -364,7 +362,7 @@
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define CFG_BOOTMAPSZ	(8 << 20)	/* Initial Memory map for Linux*/
+#define CONFIG_SYS_BOOTMAPSZ	(8 << 20)	/* Initial Memory map for Linux*/
 
 /*
  * Internal Definitions
diff --git a/include/configs/PM856.h b/include/configs/PM856.h
index 244f09aa9..6b4e2dd42 100644
--- a/include/configs/PM856.h
+++ b/include/configs/PM856.h
@@ -72,25 +72,24 @@
  */
 #define CONFIG_L2_CACHE			/* toggle L2 cache */
 #define CONFIG_BTB			/* toggle branch predition */
-#define CONFIG_ADDR_STREAMING		/* toggle addr streaming */
 
 #define CONFIG_BOARD_EARLY_INIT_F	1	/* Call board_pre_init */
 
-#define CFG_INIT_DBCR DBCR_IDM		/* Enable Debug Exceptions */
+#define CONFIG_SYS_INIT_DBCR DBCR_IDM		/* Enable Debug Exceptions */
 
-#undef	CFG_DRAM_TEST			/* memory test, takes time */
-#define CFG_MEMTEST_START	0x00200000	/* memtest region */
-#define CFG_MEMTEST_END		0x00400000
+#undef	CONFIG_SYS_DRAM_TEST			/* memory test, takes time */
+#define CONFIG_SYS_MEMTEST_START	0x00200000	/* memtest region */
+#define CONFIG_SYS_MEMTEST_END		0x00400000
 
 
 /*
  * Base addresses -- Note these are effective addresses where the
  * actual resources get mapped (not physical addresses)
  */
-#define CFG_CCSRBAR_DEFAULT	0xff700000	/* CCSRBAR Default */
-#define CFG_CCSRBAR		0xe0000000	/* relocated CCSRBAR */
-#define CFG_CCSRBAR_PHYS	CFG_CCSRBAR	/* physical addr of CCSRBAR */
-#define CFG_IMMR		CFG_CCSRBAR	/* PQII uses CFG_IMMR */
+#define CONFIG_SYS_CCSRBAR_DEFAULT	0xff700000	/* CCSRBAR Default */
+#define CONFIG_SYS_CCSRBAR		0xe0000000	/* relocated CCSRBAR */
+#define CONFIG_SYS_CCSRBAR_PHYS	CONFIG_SYS_CCSRBAR	/* physical addr of CCSRBAR */
+#define CONFIG_SYS_IMMR		CONFIG_SYS_CCSRBAR	/* PQII uses CONFIG_SYS_IMMR */
 
 /* DDR Setup */
 #define CONFIG_FSL_DDR1
@@ -102,8 +101,8 @@
 
 #define CONFIG_MEM_INIT_VALUE	0xDeadBeef
 
-#define CFG_DDR_SDRAM_BASE	0x00000000
-#define CFG_SDRAM_BASE		CFG_DDR_SDRAM_BASE
+#define CONFIG_SYS_DDR_SDRAM_BASE	0x00000000
+#define CONFIG_SYS_SDRAM_BASE		CONFIG_SYS_DDR_SDRAM_BASE
 #define CONFIG_VERY_BIG_RAM
 
 #define CONFIG_NUM_DDR_CONTROLLERS	1
@@ -114,42 +113,42 @@
 #define SPD_EEPROM_ADDRESS	0x58	/* CTLR 0 DIMM 0 */
 
 /* Manually set up DDR parameters */
-#define CFG_SDRAM_SIZE	256		/* DDR is 256 MB */
-#define CFG_DDR_CS0_BNDS	0x0000000f	/* 0-256MB */
-#define CFG_DDR_CS0_CONFIG	0x80000102
-#define CFG_DDR_TIMING_1	0x47444321
-#define CFG_DDR_TIMING_2	0x00000800	/* P9-45,may need tuning */
-#define CFG_DDR_CONTROL	0xc2008000	/* unbuffered,no DYN_PWR */
-#define CFG_DDR_MODE	0x00000062	/* DLL,normal,seq,4/2.5 */
-#define CFG_DDR_INTERVAL	0x045b0100	/* autocharge,no open page */
+#define CONFIG_SYS_SDRAM_SIZE	256		/* DDR is 256 MB */
+#define CONFIG_SYS_DDR_CS0_BNDS	0x0000000f	/* 0-256MB */
+#define CONFIG_SYS_DDR_CS0_CONFIG	0x80000102
+#define CONFIG_SYS_DDR_TIMING_1	0x47444321
+#define CONFIG_SYS_DDR_TIMING_2	0x00000800	/* P9-45,may need tuning */
+#define CONFIG_SYS_DDR_CONTROL	0xc2008000	/* unbuffered,no DYN_PWR */
+#define CONFIG_SYS_DDR_MODE	0x00000062	/* DLL,normal,seq,4/2.5 */
+#define CONFIG_SYS_DDR_INTERVAL	0x045b0100	/* autocharge,no open page */
 
 /*
  * SDRAM on the Local Bus
  */
-#define CFG_LBC_SDRAM_BASE	0xf0000000	/* Localbus SDRAM */
-#define CFG_LBC_SDRAM_SIZE	0		/* LBC SDRAM is 0 MB */
+#define CONFIG_SYS_LBC_SDRAM_BASE	0xf0000000	/* Localbus SDRAM */
+#define CONFIG_SYS_LBC_SDRAM_SIZE	0		/* LBC SDRAM is 0 MB */
 
-#define CFG_FLASH_BASE		0xfe000000	/* start of FLASH 32M */
-#define CFG_BR0_PRELIM		0xfe001801	/* port size 32bit */
+#define CONFIG_SYS_FLASH_BASE		0xfe000000	/* start of FLASH 32M */
+#define CONFIG_SYS_BR0_PRELIM		0xfe001801	/* port size 32bit */
 
-#define CFG_OR0_PRELIM		0xfe006f67	/* 32MB Flash */
-#define CFG_MAX_FLASH_BANKS	1		/* number of banks */
-#define CFG_MAX_FLASH_SECT	128		/* sectors per device */
-#undef	CFG_FLASH_CHECKSUM
-#define CFG_FLASH_ERASE_TOUT	60000	/* Flash Erase Timeout (ms) */
-#define CFG_FLASH_WRITE_TOUT	500	/* Flash Write Timeout (ms) */
+#define CONFIG_SYS_OR0_PRELIM		0xfe006f67	/* 32MB Flash */
+#define CONFIG_SYS_MAX_FLASH_BANKS	1		/* number of banks */
+#define CONFIG_SYS_MAX_FLASH_SECT	128		/* sectors per device */
+#undef	CONFIG_SYS_FLASH_CHECKSUM
+#define CONFIG_SYS_FLASH_ERASE_TOUT	60000	/* Flash Erase Timeout (ms) */
+#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Flash Write Timeout (ms) */
 
-#define CFG_MONITOR_BASE	TEXT_BASE	/* start of monitor */
+#define CONFIG_SYS_MONITOR_BASE	TEXT_BASE	/* start of monitor */
 
-#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
-#define CFG_RAMBOOT
+#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
+#define CONFIG_SYS_RAMBOOT
 #else
-#undef  CFG_RAMBOOT
+#undef  CONFIG_SYS_RAMBOOT
 #endif
 
 #define CONFIG_FLASH_CFI_DRIVER
-#define CFG_FLASH_CFI
-#define CFG_FLASH_EMPTY_INFO
+#define CONFIG_SYS_FLASH_CFI
+#define CONFIG_SYS_FLASH_EMPTY_INFO
 
 #undef CONFIG_CLOCKS_IN_MHZ
 
@@ -158,36 +157,35 @@
  * Local Bus Definitions
  */
 
-#define CFG_LBC_LCRR		0x00030004    /* LB clock ratio reg */
-#define CFG_LBC_LBCR		0x00000000    /* LB config reg */
-#define CFG_LBC_LSRT		0x20000000    /* LB sdram refresh timer */
-#define CFG_LBC_MRTPR		0x20000000    /* LB refresh timer prescal*/
+#define CONFIG_SYS_LBC_LCRR		0x00030004    /* LB clock ratio reg */
+#define CONFIG_SYS_LBC_LBCR		0x00000000    /* LB config reg */
+#define CONFIG_SYS_LBC_LSRT		0x20000000    /* LB sdram refresh timer */
+#define CONFIG_SYS_LBC_MRTPR		0x20000000    /* LB refresh timer prescal*/
 
 
-#define CONFIG_L1_INIT_RAM
-#define CFG_INIT_RAM_LOCK	1
-#define CFG_INIT_RAM_ADDR	0xe4010000	/* Initial RAM address */
-#define CFG_INIT_RAM_END	0x4000		/* End of used area in RAM */
+#define CONFIG_SYS_INIT_RAM_LOCK	1
+#define CONFIG_SYS_INIT_RAM_ADDR	0xe4010000	/* Initial RAM address */
+#define CONFIG_SYS_INIT_RAM_END	0x4000		/* End of used area in RAM */
 
-#define CFG_GBL_DATA_SIZE	128		/* num bytes initial data */
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_GBL_DATA_SIZE	128		/* num bytes initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
-#define CFG_MONITOR_LEN		(512 * 1024)    /* Reserve 512 kB for Mon */
-#define CFG_MALLOC_LEN		(128 * 1024)    /* Reserved for malloc */
+#define CONFIG_SYS_MONITOR_LEN		(512 * 1024)    /* Reserve 512 kB for Mon */
+#define CONFIG_SYS_MALLOC_LEN		(128 * 1024)    /* Reserved for malloc */
 
 /* Serial Port */
 #define CONFIG_CONS_ON_SCC	/* define if console on SCC */
 #undef  CONFIG_CONS_NONE	/* define if console on something else */
 #define CONFIG_CONS_INDEX       1  /* which serial channel for console */
 
-#define CFG_BAUDRATE_TABLE  \
+#define CONFIG_SYS_BAUDRATE_TABLE  \
 	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200}
 
 /* Use the HUSH parser */
-#define CFG_HUSH_PARSER
-#ifdef  CFG_HUSH_PARSER
-#define CFG_PROMPT_HUSH_PS2 "> "
+#define CONFIG_SYS_HUSH_PARSER
+#ifdef  CONFIG_SYS_HUSH_PARSER
+#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
 #endif
 
 /*
@@ -196,40 +194,40 @@
 #define CONFIG_FSL_I2C		/* Use FSL common I2C driver */
 #define CONFIG_HARD_I2C		/* I2C with hardware support*/
 #undef	CONFIG_SOFT_I2C			/* I2C bit-banged */
-#define CFG_I2C_SPEED		400000	/* I2C speed and slave address */
-#define CFG_I2C_SLAVE		0x7F
-#define CFG_I2C_NOPROBES        {0x69}	/* Don't probe these addrs */
-#define CFG_I2C_OFFSET		0x3000
+#define CONFIG_SYS_I2C_SPEED		400000	/* I2C speed and slave address */
+#define CONFIG_SYS_I2C_SLAVE		0x7F
+#define CONFIG_SYS_I2C_NOPROBES        {0x69}	/* Don't probe these addrs */
+#define CONFIG_SYS_I2C_OFFSET		0x3000
 
 /*
  * EEPROM configuration
  */
-#define CFG_I2C_EEPROM_ADDR		0x58
-#define CFG_I2C_EEPROM_ADDR_LEN		1
-#define CFG_EEPROM_PAGE_WRITE_BITS	4
-#define CFG_EEPROM_PAGE_WRITE_DELAY_MS	10
+#define CONFIG_SYS_I2C_EEPROM_ADDR		0x58
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN		1
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS	4
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	10
 
 /*
  * RTC configuration
  */
 #define CONFIG_RTC_PCF8563
-#define CFG_I2C_RTC_ADDR		0x51
+#define CONFIG_SYS_I2C_RTC_ADDR		0x51
 
 /* RapidIO MMU */
-#define CFG_RIO_MEM_BASE	0xc0000000	/* base address */
-#define CFG_RIO_MEM_PHYS	CFG_RIO_MEM_BASE
-#define CFG_RIO_MEM_SIZE	0x20000000	/* 128M */
+#define CONFIG_SYS_RIO_MEM_BASE	0xc0000000	/* base address */
+#define CONFIG_SYS_RIO_MEM_PHYS	CONFIG_SYS_RIO_MEM_BASE
+#define CONFIG_SYS_RIO_MEM_SIZE	0x20000000	/* 128M */
 
 /*
  * General PCI
  * Addresses are mapped 1-1.
  */
-#define CFG_PCI1_MEM_BASE	0x80000000
-#define CFG_PCI1_MEM_PHYS	CFG_PCI1_MEM_BASE
-#define CFG_PCI1_MEM_SIZE	0x20000000	/* 512M */
-#define CFG_PCI1_IO_BASE	0xe2000000
-#define CFG_PCI1_IO_PHYS	CFG_PCI1_IO_BASE
-#define CFG_PCI1_IO_SIZE	0x1000000	/* 16M */
+#define CONFIG_SYS_PCI1_MEM_BASE	0x80000000
+#define CONFIG_SYS_PCI1_MEM_PHYS	CONFIG_SYS_PCI1_MEM_BASE
+#define CONFIG_SYS_PCI1_MEM_SIZE	0x20000000	/* 512M */
+#define CONFIG_SYS_PCI1_IO_BASE	0xe2000000
+#define CONFIG_SYS_PCI1_IO_PHYS	CONFIG_SYS_PCI1_IO_BASE
+#define CONFIG_SYS_PCI1_IO_SIZE	0x1000000	/* 16M */
 
 #if defined(CONFIG_PCI)
 
@@ -246,7 +244,7 @@
 #endif
 
 #undef CONFIG_PCI_SCAN_SHOW		/* show pci devices on startup */
-#define CFG_PCI_SUBSYS_VENDORID 0x1057  /* Motorola */
+#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x1057  /* Motorola */
 
 #endif	/* CONFIG_PCI */
 
@@ -284,28 +282,28 @@
    * - Full duplex
  */
 #define CONFIG_ETHER_ON_FCC3
-#define CFG_CMXFCR_MASK3	(CMXFCR_FC3 | CMXFCR_RF3CS_MSK | CMXFCR_TF3CS_MSK)
-#define CFG_CMXFCR_VALUE3	(CMXFCR_RF3CS_CLK15 | CMXFCR_TF3CS_CLK14)
-#define CFG_CPMFCR_RAMTYPE	0
-#define CFG_FCC_PSMR		(FCC_PSMR_FDE)
+#define CONFIG_SYS_CMXFCR_MASK3	(CMXFCR_FC3 | CMXFCR_RF3CS_MSK | CMXFCR_TF3CS_MSK)
+#define CONFIG_SYS_CMXFCR_VALUE3	(CMXFCR_RF3CS_CLK15 | CMXFCR_TF3CS_CLK14)
+#define CONFIG_SYS_CPMFCR_RAMTYPE	0
+#define CONFIG_SYS_FCC_PSMR		(FCC_PSMR_FDE)
 
 /*
  * Environment
  */
-#ifndef CFG_RAMBOOT
-  #define CFG_ENV_IS_IN_FLASH	1
-  #define CFG_ENV_ADDR		(CFG_MONITOR_BASE - 0x80000)
-  #define CFG_ENV_SECT_SIZE	0x40000	/* 256K(one sector) for env */
-  #define CFG_ENV_SIZE		0x2000
+#ifndef CONFIG_SYS_RAMBOOT
+  #define CONFIG_ENV_IS_IN_FLASH	1
+  #define CONFIG_ENV_ADDR		(CONFIG_SYS_MONITOR_BASE - 0x80000)
+  #define CONFIG_ENV_SECT_SIZE	0x40000	/* 256K(one sector) for env */
+  #define CONFIG_ENV_SIZE		0x2000
 #else
-  #define CFG_NO_FLASH		1	/* Flash is not usable now */
-  #define CFG_ENV_IS_NOWHERE	1	/* Store ENV in memory only */
-  #define CFG_ENV_ADDR		(CFG_MONITOR_BASE - 0x1000)
-  #define CFG_ENV_SIZE		0x2000
+  #define CONFIG_SYS_NO_FLASH		1	/* Flash is not usable now */
+  #define CONFIG_ENV_IS_NOWHERE	1	/* Store ENV in memory only */
+  #define CONFIG_ENV_ADDR		(CONFIG_SYS_MONITOR_BASE - 0x1000)
+  #define CONFIG_ENV_SIZE		0x2000
 #endif
 
 #define CONFIG_LOADS_ECHO	1	/* echo on for serial download */
-#define CFG_LOADS_BAUD_CHANGE	1	/* allow baudrate change */
+#define CONFIG_SYS_LOADS_BAUD_CHANGE	1	/* allow baudrate change */
 
 
 /*
@@ -331,7 +329,7 @@
     #define CONFIG_CMD_PCI
 #endif
 
-#if defined(CFG_RAMBOOT)
+#if defined(CONFIG_SYS_RAMBOOT)
     #undef CONFIG_CMD_ENV
     #undef CONFIG_CMD_LOADS
 #endif
@@ -342,20 +340,20 @@
 /*
  * Miscellaneous configurable options
  */
-#define CFG_LONGHELP			/* undef to save memory	*/
-#define CFG_LOAD_ADDR	0x1000000	/* default load address */
-#define CFG_PROMPT	"=> "		/* Monitor Command Prompt */
+#define CONFIG_SYS_LONGHELP			/* undef to save memory	*/
+#define CONFIG_SYS_LOAD_ADDR	0x1000000	/* default load address */
+#define CONFIG_SYS_PROMPT	"=> "		/* Monitor Command Prompt */
 
 #if defined(CONFIG_CMD_KGDB)
-    #define CFG_CBSIZE	1024		/* Console I/O Buffer Size */
+    #define CONFIG_SYS_CBSIZE	1024		/* Console I/O Buffer Size */
 #else
-    #define CFG_CBSIZE	256		/* Console I/O Buffer Size */
+    #define CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size */
 #endif
 
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define CFG_MAXARGS	16		/* max number of command args */
-#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size */
-#define CFG_HZ		1000		/* decrementer freq: 1ms ticks */
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS	16		/* max number of command args */
+#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size */
+#define CONFIG_SYS_HZ		1000		/* decrementer freq: 1ms ticks */
 #define CONFIG_LOOPW
 
 /*
@@ -363,7 +361,7 @@
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define CFG_BOOTMAPSZ	(8 << 20)	/* Initial Memory map for Linux*/
+#define CONFIG_SYS_BOOTMAPSZ	(8 << 20)	/* Initial Memory map for Linux*/
 
 /*
  * Internal Definitions
diff --git a/include/configs/PMC405.h b/include/configs/PMC405.h
index 966bbf9a3..8d07d7705 100644
--- a/include/configs/PMC405.h
+++ b/include/configs/PMC405.h
@@ -51,11 +51,12 @@
 #define CONFIG_PREBOOT                  /* enable preboot variable      */
 
 #define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
-#define CFG_LOADS_BAUD_CHANGE	1	/* allow baudrate change	*/
+#define CONFIG_SYS_LOADS_BAUD_CHANGE	1	/* allow baudrate change	*/
 
 #define CONFIG_NET_MULTI	1
 #undef  CONFIG_HAS_ETH1
 
+#define CONFIG_PPC4xx_EMAC
 #define CONFIG_MII		1	/* MII PHY management		*/
 #define CONFIG_PHY_ADDR		0	/* PHY address			*/
 #define CONFIG_LXT971_NO_SLEEP  1       /* disable sleep mode in LXT971 */
@@ -97,52 +98,52 @@
 #undef	CONFIG_WATCHDOG			/* watchdog disabled		*/
 
 #define CONFIG_RTC_MC146818             /* DS1685 is MC146818 compatible*/
-#define CFG_RTC_REG_BASE_ADDR	 0xF0000500 /* RTC Base Address         */
+#define CONFIG_SYS_RTC_REG_BASE_ADDR	 0xF0000500 /* RTC Base Address         */
 
 #define CONFIG_SDRAM_BANK0	1	/* init onboard SDRAM bank 0	*/
 
 /*
  * Miscellaneous configurable options
  */
-#define CFG_LONGHELP			/* undef to save memory		*/
-#define CFG_PROMPT	"=> "		/* Monitor Command Prompt	*/
+#define CONFIG_SYS_LONGHELP			/* undef to save memory		*/
+#define CONFIG_SYS_PROMPT	"=> "		/* Monitor Command Prompt	*/
 
-#undef	CFG_HUSH_PARSER			/* use "hush" command parser	*/
-#ifdef	CFG_HUSH_PARSER
-#define CFG_PROMPT_HUSH_PS2	"> "
+#undef	CONFIG_SYS_HUSH_PARSER			/* use "hush" command parser	*/
+#ifdef	CONFIG_SYS_HUSH_PARSER
+#define CONFIG_SYS_PROMPT_HUSH_PS2	"> "
 #endif
 
 #if defined(CONFIG_CMD_KGDB)
-#define CFG_CBSIZE	1024		/* Console I/O Buffer Size	*/
+#define CONFIG_SYS_CBSIZE	1024		/* Console I/O Buffer Size	*/
 #else
-#define CFG_CBSIZE	256		/* Console I/O Buffer Size	*/
+#define CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size	*/
 #endif
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define CFG_MAXARGS	16		/* max number of command args	*/
-#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS	16		/* max number of command args	*/
+#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
 
-#define CFG_DEVICE_NULLDEV	1	/* include nulldev device	*/
+#define CONFIG_SYS_DEVICE_NULLDEV	1	/* include nulldev device	*/
 
-#define CFG_CONSOLE_INFO_QUIET	1	/* don't print console @ startup*/
+#define CONFIG_SYS_CONSOLE_INFO_QUIET	1	/* don't print console @ startup*/
 
 #define CONFIG_AUTO_COMPLETE	1       /* add autocompletion support   */
 
-#define CFG_MEMTEST_START	0x0400000	/* memtest works on	*/
-#define CFG_MEMTEST_END		0x0C00000	/* 4 ... 12 MB in DRAM	*/
+#define CONFIG_SYS_MEMTEST_START	0x0400000	/* memtest works on	*/
+#define CONFIG_SYS_MEMTEST_END		0x0C00000	/* 4 ... 12 MB in DRAM	*/
 
-#undef	CFG_EXT_SERIAL_CLOCK	       /* no external serial clock used */
-#define CFG_IGNORE_405_UART_ERRATA_59	/* ignore ppc405gp errata #59	*/
-#define CFG_BASE_BAUD	    691200
+#undef	CONFIG_SYS_EXT_SERIAL_CLOCK	       /* no external serial clock used */
+#define CONFIG_SYS_IGNORE_405_UART_ERRATA_59	/* ignore ppc405gp errata #59	*/
+#define CONFIG_SYS_BASE_BAUD	    691200
 
 /* The following table includes the supported baudrates */
-#define CFG_BAUDRATE_TABLE	\
+#define CONFIG_SYS_BAUDRATE_TABLE	\
 	{ 300, 600, 1200, 2400, 4800, 9600, 19200, 38400,     \
 	 57600, 115200, 230400, 460800, 921600 }
 
-#define CFG_LOAD_ADDR	0x100000	/* default load address */
-#define CFG_EXTBDINFO	1		/* To use extended board_into (bd_t) */
+#define CONFIG_SYS_LOAD_ADDR	0x100000	/* default load address */
+#define CONFIG_SYS_EXTBDINFO	1		/* To use extended board_into (bd_t) */
 
-#define CFG_HZ		1000		/* decrementer freq: 1 ms ticks */
+#define CONFIG_SYS_HZ		1000		/* decrementer freq: 1 ms ticks */
 
 #define CONFIG_LOOPW            1       /* enable loopw command         */
 
@@ -150,7 +151,7 @@
 
 #define CONFIG_VERSION_VARIABLE 1	/* include version env variable */
 
-#define CFG_RX_ETH_BUFFER	16	/* use 16 rx buffer on 405 emac */
+#define CONFIG_SYS_RX_ETH_BUFFER	16	/* use 16 rx buffer on 405 emac */
 
 /*-----------------------------------------------------------------------
  * PCI stuff
@@ -171,57 +172,57 @@
 
 #define CONFIG_PCI_BOOTDELAY    0       /* enable pci bootdelay variable*/
 
-#define CFG_PCI_SUBSYS_VENDORID 0x12FE  /* PCI Vendor ID: esd gmbh      */
-#define CFG_PCI_SUBSYS_DEVICEID_NONMONARCH 0x0408  /* PCI Device ID: Non-Monarch */
-#define CFG_PCI_SUBSYS_DEVICEID_MONARCH 0x0409     /* PCI Device ID: Monarch */
-#define CFG_PCI_SUBSYS_DEVICEID pmc405_pci_subsys_deviceid()
+#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x12FE  /* PCI Vendor ID: esd gmbh      */
+#define CONFIG_SYS_PCI_SUBSYS_DEVICEID_NONMONARCH 0x0408  /* PCI Device ID: Non-Monarch */
+#define CONFIG_SYS_PCI_SUBSYS_DEVICEID_MONARCH 0x0409     /* PCI Device ID: Monarch */
+#define CONFIG_SYS_PCI_SUBSYS_DEVICEID pmc405_pci_subsys_deviceid()
 
-#define CFG_PCI_CLASSCODE       0x0b20  /* PCI Class Code: Processor/PPC*/
+#define CONFIG_SYS_PCI_CLASSCODE       0x0b20  /* PCI Class Code: Processor/PPC*/
 
-#define CFG_PCI_PTM1LA  (bd->bi_memstart) /* point to sdram               */
-#define CFG_PCI_PTM1MS  (~(bd->bi_memsize - 1) | 1) /* memsize, enable hard-wired to 1 */
-#define CFG_PCI_PTM1PCI 0x00000000      /* Host: use this pci address   */
+#define CONFIG_SYS_PCI_PTM1LA  (bd->bi_memstart) /* point to sdram               */
+#define CONFIG_SYS_PCI_PTM1MS  (~(bd->bi_memsize - 1) | 1) /* memsize, enable hard-wired to 1 */
+#define CONFIG_SYS_PCI_PTM1PCI 0x00000000      /* Host: use this pci address   */
 #if 1
-#define CFG_PCI_PTM2LA	0xef000000	/* point to internal regs       */
-#define CFG_PCI_PTM2MS  0xff000001      /* 16MB, enable                 */
-#define CFG_PCI_PTM2PCI 0x00000000      /* Host: use this pci address   */
+#define CONFIG_SYS_PCI_PTM2LA	0xef000000	/* point to internal regs       */
+#define CONFIG_SYS_PCI_PTM2MS  0xff000001      /* 16MB, enable                 */
+#define CONFIG_SYS_PCI_PTM2PCI 0x00000000      /* Host: use this pci address   */
 #else /* old mapping */
-#define CFG_PCI_PTM2LA  0xffc00000      /* point to flash               */
-#define CFG_PCI_PTM2MS  0xffc00001      /* 4MB, enable                  */
-#define CFG_PCI_PTM2PCI 0x04000000      /* Host: use this pci address   */
+#define CONFIG_SYS_PCI_PTM2LA  0xffc00000      /* point to flash               */
+#define CONFIG_SYS_PCI_PTM2MS  0xffc00001      /* 4MB, enable                  */
+#define CONFIG_SYS_PCI_PTM2PCI 0x04000000      /* Host: use this pci address   */
 #endif
 /*-----------------------------------------------------------------------
  * Start addresses for the final memory configuration
  * (Set up by the startup code)
- * Please note that CFG_SDRAM_BASE _must_ start at 0
+ * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
  */
-#define CFG_SDRAM_BASE		0x00000000
-#define CFG_MONITOR_BASE	0xFFFC0000
-#define CFG_MONITOR_LEN		(256 * 1024)	/* Reserve 256 kB for Monitor	*/
-#define CFG_MALLOC_LEN		(128 * 1024)	/* Reserve 128 kB for malloc()	*/
+#define CONFIG_SYS_SDRAM_BASE		0x00000000
+#define CONFIG_SYS_MONITOR_BASE	0xFFFC0000
+#define CONFIG_SYS_MONITOR_LEN		(256 * 1024)	/* Reserve 256 kB for Monitor	*/
+#define CONFIG_SYS_MALLOC_LEN		(128 * 1024)	/* Reserve 128 kB for malloc()	*/
 
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
+#define CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
 
 /*-----------------------------------------------------------------------
  * FLASH organization
  */
-#define CFG_FLASH_BASE		0xFE000000
-#define CFG_FLASH_INCREMENT	0x01000000
+#define CONFIG_SYS_FLASH_BASE		0xFE000000
+#define CONFIG_SYS_FLASH_INCREMENT	0x01000000
 
-#define CFG_FLASH_CFI         1       /* Flash is CFI conformant */
+#define CONFIG_SYS_FLASH_CFI         1       /* Flash is CFI conformant */
 #define CONFIG_FLASH_CFI_DRIVER  1       /* Use the common driver */
-#define CFG_FLASH_PROTECTION  1       /* don't use hardware protection        */
-#define CFG_FLASH_USE_BUFFER_WRITE 1  /* use buffered writes (20x faster)     */
-#define CFG_MAX_FLASH_BANKS   2       /* max num of flash banks */
-#define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE, CFG_FLASH_BASE + CFG_FLASH_INCREMENT }
-#define CFG_MAX_FLASH_SECT    128     /* max num of sects on one chip */
+#define CONFIG_SYS_FLASH_PROTECTION  1       /* don't use hardware protection        */
+#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1  /* use buffered writes (20x faster)     */
+#define CONFIG_SYS_MAX_FLASH_BANKS   2       /* max num of flash banks */
+#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE + CONFIG_SYS_FLASH_INCREMENT }
+#define CONFIG_SYS_MAX_FLASH_SECT    128     /* max num of sects on one chip */
 
-#define CFG_FLASH_EMPTY_INFO		/* print 'E' for empty sector on flinfo */
+#define CONFIG_SYS_FLASH_EMPTY_INFO		/* print 'E' for empty sector on flinfo */
 
 /*
  * JFFS2 partitions - second bank contains u-boot
@@ -244,30 +245,29 @@
 /*-----------------------------------------------------------------------
  * Environment Variable setup
  */
-#define CFG_ENV_IS_IN_EEPROM	1	/* use EEPROM for environment vars */
-#define CFG_ENV_OFFSET		0x000	/* environment starts at the beginning of the EEPROM */
-#define CFG_ENV_SIZE		0x800	/* 2048 bytes may be used for env vars*/
+#define CONFIG_ENV_IS_IN_EEPROM	1	/* use EEPROM for environment vars */
+#define CONFIG_ENV_OFFSET		0x000	/* environment starts at the beginning of the EEPROM */
+#define CONFIG_ENV_SIZE		0x800	/* 2048 bytes may be used for env vars*/
 				   /* total size of a CAT24WC16 is 2048 bytes */
 
-#define CFG_NVRAM_BASE_ADDR	0xF0000500		/* NVRAM base address	*/
-#define CFG_NVRAM_SIZE		242			/* NVRAM size		*/
+#define CONFIG_SYS_NVRAM_BASE_ADDR	0xF0000500		/* NVRAM base address	*/
+#define CONFIG_SYS_NVRAM_SIZE		242			/* NVRAM size		*/
 
 /*-----------------------------------------------------------------------
  * I2C EEPROM (CAT24WC16) for environment
  */
 #define CONFIG_HARD_I2C			/* I2c with hardware support */
-#define CFG_I2C_SPEED		400000	/* I2C speed and slave address */
-#define CFG_I2C_SLAVE		0x7F
+#define CONFIG_SYS_I2C_SPEED		400000	/* I2C speed and slave address */
+#define CONFIG_SYS_I2C_SLAVE		0x7F
 
-#define CFG_I2C_EEPROM_ADDR	0x50	/* EEPROM CAT28WC08		*/
-#define CFG_I2C_EEPROM_ADDR_LEN 1	/* Bytes of address		*/
+#define CONFIG_SYS_I2C_EEPROM_ADDR	0x50	/* EEPROM CAT28WC08		*/
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1	/* Bytes of address		*/
 /* mask of address bits that overflow into the "EEPROM chip address"	*/
-#define CFG_I2C_EEPROM_ADDR_OVERFLOW	0x07
-#define CFG_EEPROM_PAGE_WRITE_BITS 4	/* The Catalyst CAT24WC08 has	*/
+#define CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW	0x07
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 4	/* The Catalyst CAT24WC08 has	*/
 					/* 16 byte page write mode using*/
 					/* last 4 bits of the address	*/
-#define CFG_EEPROM_PAGE_WRITE_DELAY_MS	10   /* and takes up to 10 msec */
-#define CFG_EEPROM_PAGE_WRITE_ENABLE
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	10   /* and takes up to 10 msec */
 
 /*-----------------------------------------------------------------------
  * External Bus Controller (EBC) Setup
@@ -279,63 +279,63 @@
 #define NVRAM_BA        0xF0200000          /* NVRAM Base Address               */
 
 /* Memory Bank 0 (Flash Bank 0) initialization					*/
-#define CFG_EBC_PB0AP	0x92015480
-#define CFG_EBC_PB0CR	FLASH0_BA | 0x9A000 /* BAS=0xFF0,BS=16MB,BU=R/W,BW=16bit*/
+#define CONFIG_SYS_EBC_PB0AP	0x92015480
+#define CONFIG_SYS_EBC_PB0CR	FLASH0_BA | 0x9A000 /* BAS=0xFF0,BS=16MB,BU=R/W,BW=16bit*/
 
 /* Memory Bank 1 (Flash Bank 1) initialization					*/
-#define CFG_EBC_PB1AP	0x92015480
-#define CFG_EBC_PB1CR	FLASH1_BA | 0x9A000 /* BAS=0xFE0,BS=16MB,BU=R/W,BW=16bit*/
+#define CONFIG_SYS_EBC_PB1AP	0x92015480
+#define CONFIG_SYS_EBC_PB1CR	FLASH1_BA | 0x9A000 /* BAS=0xFE0,BS=16MB,BU=R/W,BW=16bit*/
 
 /* Memory Bank 2 (CAN0, 1, RTC) initialization					*/
-#define CFG_EBC_PB2AP	0x03000440   /* TWT=5,TH=2,CSN=0,OEN=0,WBN=0,WBF=0      */
-#define CFG_EBC_PB2CR	CAN_BA | 0x18000    /* BAS=0xF00,BS=1MB,BU=R/W,BW=8bit	*/
+#define CONFIG_SYS_EBC_PB2AP	0x03000440   /* TWT=5,TH=2,CSN=0,OEN=0,WBN=0,WBF=0      */
+#define CONFIG_SYS_EBC_PB2CR	CAN_BA | 0x18000    /* BAS=0xF00,BS=1MB,BU=R/W,BW=8bit	*/
 
 /* Memory Bank 3 -> unused */
 
 /* Memory Bank 4 (NVRAM) initialization					*/
-#define CFG_EBC_PB4AP	0x03000440   /* TWT=5,TH=2,CSN=0,OEN=0,WBN=0,WBF=0      */
-#define CFG_EBC_PB4CR	NVRAM_BA | 0x18000    /* BAS=0xF00,BS=1MB,BU=R/W,BW=8bit	*/
+#define CONFIG_SYS_EBC_PB4AP	0x03000440   /* TWT=5,TH=2,CSN=0,OEN=0,WBN=0,WBF=0      */
+#define CONFIG_SYS_EBC_PB4CR	NVRAM_BA | 0x18000    /* BAS=0xF00,BS=1MB,BU=R/W,BW=8bit	*/
 
 /*-----------------------------------------------------------------------
  * FPGA stuff
  */
-#define CFG_FPGA_XC95XL		1	    /* using Xilinx XC95XL CPLD	     */
-#define CFG_FPGA_MAX_SIZE	32*1024	    /* 32kByte is enough for CPLD    */
+#define CONFIG_SYS_FPGA_XC95XL		1	    /* using Xilinx XC95XL CPLD	     */
+#define CONFIG_SYS_FPGA_MAX_SIZE	32*1024	    /* 32kByte is enough for CPLD    */
 
 /* FPGA program pin configuration */
-#define CFG_FPGA_PRG		0x04000000  /* JTAG TMS pin (ppc output)     */
-#define CFG_FPGA_CLK		0x02000000  /* JTAG TCK pin (ppc output)     */
-#define CFG_FPGA_DATA		0x01000000  /* JTAG TDO->TDI data pin (ppc output) */
-#define CFG_FPGA_INIT		0x00010000  /* unused (ppc input)	     */
-#define CFG_FPGA_DONE		0x00008000  /* JTAG TDI->TDO pin (ppc input) */
+#define CONFIG_SYS_FPGA_PRG		0x04000000  /* JTAG TMS pin (ppc output)     */
+#define CONFIG_SYS_FPGA_CLK		0x02000000  /* JTAG TCK pin (ppc output)     */
+#define CONFIG_SYS_FPGA_DATA		0x01000000  /* JTAG TDO->TDI data pin (ppc output) */
+#define CONFIG_SYS_FPGA_INIT		0x00010000  /* unused (ppc input)	     */
+#define CONFIG_SYS_FPGA_DONE		0x00008000  /* JTAG TDI->TDO pin (ppc input) */
 
-#define CFG_VXWORKS_MAC_PTR	0x00000000	/* Pass Ethernet MAC to VxWorks */
+#define CONFIG_SYS_VXWORKS_MAC_PTR	0x00000000	/* Pass Ethernet MAC to VxWorks */
 
 /*-----------------------------------------------------------------------
  * GPIOs
  */
-#define CFG_NONMONARCH		(0x80000000 >> 14)   /* GPIO24 */
-#define CFG_XEREADY		(0x80000000 >> 15)   /* GPIO15 */
-#define CFG_INTA_FAKE		(0x80000000 >> 19)   /* GPIO19 */
-#define CFG_SELF_RST		(0x80000000 >> 21)   /* GPIO21 */
-#define CFG_REV1_2		(0x80000000 >> 23)   /* GPIO23 */
+#define CONFIG_SYS_NONMONARCH		(0x80000000 >> 14)   /* GPIO24 */
+#define CONFIG_SYS_XEREADY		(0x80000000 >> 15)   /* GPIO15 */
+#define CONFIG_SYS_INTA_FAKE		(0x80000000 >> 19)   /* GPIO19 */
+#define CONFIG_SYS_SELF_RST		(0x80000000 >> 21)   /* GPIO21 */
+#define CONFIG_SYS_REV1_2		(0x80000000 >> 23)   /* GPIO23 */
 
 /*-----------------------------------------------------------------------
  * Definitions for initial stack pointer and data area (in data cache)
  */
 
 /* use on chip memory ( OCM ) for temperary stack until sdram is tested */
-#define CFG_TEMP_STACK_OCM	1
+#define CONFIG_SYS_TEMP_STACK_OCM	1
 
 /* On Chip Memory location */
-#define CFG_OCM_DATA_ADDR	0xF8000000
-#define CFG_OCM_DATA_SIZE	0x1000
-
-#define CFG_INIT_RAM_ADDR	CFG_OCM_DATA_ADDR /* inside of SDRAM		*/
-#define CFG_INIT_RAM_END	CFG_OCM_DATA_SIZE /* End of used area in RAM	*/
-#define CFG_GBL_DATA_SIZE      128  /* size in bytes reserved for initial data */
-#define CFG_GBL_DATA_OFFSET    (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_OCM_DATA_ADDR	0xF8000000
+#define CONFIG_SYS_OCM_DATA_SIZE	0x1000
+
+#define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_OCM_DATA_ADDR /* inside of SDRAM		*/
+#define CONFIG_SYS_INIT_RAM_END	CONFIG_SYS_OCM_DATA_SIZE /* End of used area in RAM	*/
+#define CONFIG_SYS_GBL_DATA_SIZE      128  /* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET    (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
 /*
  * Internal Definitions
diff --git a/include/configs/PMC440.h b/include/configs/PMC440.h
index 9140287c8..f9f10021b 100644
--- a/include/configs/PMC440.h
+++ b/include/configs/PMC440.h
@@ -1,5 +1,5 @@
 /*
- * (C) Copyright 2007
+ * (C) Copyright 2007-2008
  * Matthias Fuchs, esd gmbh, matthias.fuchs@esd-electronics.com.
  * Based on the sequoia configuration file.
  *
@@ -46,69 +46,71 @@
 #endif
 
 #define CONFIG_BOARD_EARLY_INIT_F 1	/* Call board_early_init_f */
+#define CONFIG_MISC_INIT_F	1
 #define CONFIG_MISC_INIT_R	1	/* Call misc_init_r     */
 #define CONFIG_BOARD_TYPES	1	/* support board types  */
 /*-----------------------------------------------------------------------
  * Base addresses -- Note these are effective addresses where the
  * actual resources get mapped (not physical addresses)
  *----------------------------------------------------------------------*/
-#define CFG_MONITOR_LEN		(384  * 1024)	/* Reserve 384 kB for Monitor   */
-#define CFG_MALLOC_LEN		(1024 * 1024)	/* Reserve 256 kB for malloc()  */
+#define CONFIG_SYS_MONITOR_LEN		(384  * 1024)	/* Reserve 384 kB for Monitor   */
+#define CONFIG_SYS_MALLOC_LEN		(1024 * 1024)	/* Reserve 256 kB for malloc()  */
 
 #define CONFIG_PRAM		0	/* use pram variable to overwrite */
 
-#define CFG_BOOT_BASE_ADDR	0xf0000000
-#define CFG_SDRAM_BASE		0x00000000	/* _must_ be 0          */
-#define CFG_FLASH_BASE		0xfc000000	/* start of FLASH       */
-#define CFG_MONITOR_BASE	TEXT_BASE
-#define CFG_NAND_ADDR		0xd0000000	/* NAND Flash           */
-#define CFG_OCM_BASE		0xe0010000	/* ocm                  */
-#define CFG_OCM_DATA_ADDR	CFG_OCM_BASE
-#define CFG_PCI_BASE		0xe0000000	/* Internal PCI regs    */
-#define CFG_PCI_MEMBASE		0x80000000	/* mapped pci memory    */
-#define CFG_PCI_MEMBASE1	CFG_PCI_MEMBASE  + 0x10000000
-#define CFG_PCI_MEMBASE2	CFG_PCI_MEMBASE1 + 0x10000000
-#define CFG_PCI_MEMBASE3	CFG_PCI_MEMBASE2 + 0x10000000
-#define CFG_PCI_MEMSIZE		0x80000000	/* 2GB! */
+#define CONFIG_SYS_BOOT_BASE_ADDR	0xf0000000
+#define CONFIG_SYS_SDRAM_BASE		0x00000000	/* _must_ be 0          */
+#define CONFIG_SYS_FLASH_BASE		0xfc000000	/* start of FLASH       */
+#define CONFIG_SYS_MONITOR_BASE	TEXT_BASE
+#define CONFIG_SYS_NAND_ADDR		0xd0000000	/* NAND Flash           */
+#define CONFIG_SYS_OCM_BASE		0xe0010000	/* ocm                  */
+#define CONFIG_SYS_OCM_DATA_ADDR	CONFIG_SYS_OCM_BASE
+#define CONFIG_SYS_PCI_BASE		0xe0000000	/* Internal PCI regs    */
+#define CONFIG_SYS_PCI_MEMBASE		0x80000000	/* mapped pci memory    */
+#define CONFIG_SYS_PCI_MEMBASE1	CONFIG_SYS_PCI_MEMBASE  + 0x10000000
+#define CONFIG_SYS_PCI_MEMBASE2	CONFIG_SYS_PCI_MEMBASE1 + 0x10000000
+#define CONFIG_SYS_PCI_MEMBASE3	CONFIG_SYS_PCI_MEMBASE2 + 0x10000000
+#define CONFIG_SYS_PCI_MEMSIZE		0x80000000	/* 2GB! */
 
 /* Don't change either of these */
-#define CFG_PERIPHERAL_BASE	0xef600000	/* internal peripherals */
+#define CONFIG_SYS_PERIPHERAL_BASE	0xef600000	/* internal peripherals */
 
-#define CFG_USB2D0_BASE		0xe0000100
-#define CFG_USB_DEVICE		0xe0000000
-#define CFG_USB_HOST		0xe0000400
-#define CFG_FPGA_BASE0		0xef000000	/* 32 bit */
-#define CFG_FPGA_BASE1		0xef100000	/* 16 bit */
+#define CONFIG_SYS_USB2D0_BASE		0xe0000100
+#define CONFIG_SYS_USB_DEVICE		0xe0000000
+#define CONFIG_SYS_USB_HOST		0xe0000400
+#define CONFIG_SYS_FPGA_BASE0		0xef000000	/* 32 bit */
+#define CONFIG_SYS_FPGA_BASE1		0xef100000	/* 16 bit */
+#define CONFIG_SYS_RESET_BASE		0xef200000
 
 /*-----------------------------------------------------------------------
  * Initial RAM & stack pointer
  *----------------------------------------------------------------------*/
 /* 440EPx/440GRx have 16KB of internal SRAM, so no need for D-Cache	*/
-#define CFG_INIT_RAM_ADDR	CFG_OCM_BASE	/* OCM                  */
-#define CFG_INIT_RAM_END	(4 << 10)
-#define CFG_GBL_DATA_SIZE	256	/* num bytes initial data */
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP_OFFSET	CFG_POST_WORD_ADDR
+#define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_OCM_BASE	/* OCM                  */
+#define CONFIG_SYS_INIT_RAM_END	(4 << 10)
+#define CONFIG_SYS_GBL_DATA_SIZE	256	/* num bytes initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_POST_WORD_ADDR
 
 /*-----------------------------------------------------------------------
  * Serial Port
  *----------------------------------------------------------------------*/
-#undef CFG_EXT_SERIAL_CLOCK
+#undef CONFIG_SYS_EXT_SERIAL_CLOCK
 #define CONFIG_BAUDRATE		115200
 #define CONFIG_SERIAL_MULTI	1
 #undef CONFIG_UART1_CONSOLE	/* console on front panel */
 
-#define CFG_BAUDRATE_TABLE						\
+#define CONFIG_SYS_BAUDRATE_TABLE						\
 	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
 
 /*-----------------------------------------------------------------------
  * Environment
  *----------------------------------------------------------------------*/
 #if !defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL)
-#define CFG_ENV_IS_IN_EEPROM	1	/* use FLASH for environment vars */
+#define CONFIG_ENV_IS_IN_EEPROM	1	/* use FLASH for environment vars */
 #else
-#define CFG_ENV_IS_IN_NAND	1	/* use NAND for environment vars */
-#define CFG_ENV_IS_EMBEDDED	1	/* use embedded environment */
+#define CONFIG_ENV_IS_IN_NAND	1	/* use NAND for environment vars */
+#define CONFIG_ENV_IS_EMBEDDED	1	/* use embedded environment */
 #endif
 
 /*-----------------------------------------------------------------------
@@ -119,36 +121,36 @@
 /*-----------------------------------------------------------------------
  * FLASH related
  *----------------------------------------------------------------------*/
-#define CFG_FLASH_CFI		/* The flash is CFI compatible  */
+#define CONFIG_SYS_FLASH_CFI		/* The flash is CFI compatible  */
 #define CONFIG_FLASH_CFI_DRIVER	/* Use common CFI driver        */
 
-#define CFG_FLASH_BANKS_LIST	{ CFG_FLASH_BASE }
+#define CONFIG_SYS_FLASH_BANKS_LIST	{ CONFIG_SYS_FLASH_BASE }
 
-#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks           */
-#define CFG_MAX_FLASH_SECT	512	/* max number of sectors on one chip    */
+#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks           */
+#define CONFIG_SYS_MAX_FLASH_SECT	512	/* max number of sectors on one chip    */
 
-#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)      */
-#define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)      */
+#define CONFIG_SYS_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)      */
+#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)      */
 
-#define CFG_FLASH_USE_BUFFER_WRITE 1	/* use buffered writes (20x faster)     */
-#define CFG_FLASH_PROTECTION	1	/* use hardware flash protection        */
+#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1	/* use buffered writes (20x faster)     */
+#define CONFIG_SYS_FLASH_PROTECTION	1	/* use hardware flash protection        */
 
-#define CFG_FLASH_EMPTY_INFO	/* print 'E' for empty sector on flinfo */
-#define CFG_FLASH_QUIET_TEST	1	/* don't warn upon unknown flash        */
+#define CONFIG_SYS_FLASH_EMPTY_INFO	/* print 'E' for empty sector on flinfo */
+#define CONFIG_SYS_FLASH_QUIET_TEST	1	/* don't warn upon unknown flash        */
 
-#ifdef CFG_ENV_IS_IN_FLASH
-#define CFG_ENV_SECT_SIZE	0x20000	/* size of one complete sector          */
-#define CFG_ENV_ADDR		((-CFG_MONITOR_LEN)-CFG_ENV_SECT_SIZE)
-#define	CFG_ENV_SIZE		0x2000	/* Total Size of Environment Sector     */
+#ifdef CONFIG_ENV_IS_IN_FLASH
+#define CONFIG_ENV_SECT_SIZE	0x20000	/* size of one complete sector          */
+#define CONFIG_ENV_ADDR		((-CONFIG_SYS_MONITOR_LEN)-CONFIG_ENV_SECT_SIZE)
+#define CONFIG_ENV_SIZE		0x2000	/* Total Size of Environment Sector     */
 
 /* Address and size of Redundant Environment Sector	*/
-#define CFG_ENV_ADDR_REDUND	(CFG_ENV_ADDR-CFG_ENV_SECT_SIZE)
-#define CFG_ENV_SIZE_REDUND	(CFG_ENV_SIZE)
+#define CONFIG_ENV_ADDR_REDUND	(CONFIG_ENV_ADDR-CONFIG_ENV_SECT_SIZE)
+#define CONFIG_ENV_SIZE_REDUND	(CONFIG_ENV_SIZE)
 #endif
 
-#ifdef CFG_ENV_IS_IN_EEPROM
-#define CFG_ENV_OFFSET		0	/* environment starts at the beginning of the EEPROM */
-#define CFG_ENV_SIZE		0x1000	/* 4096 bytes may be used for env vars */
+#ifdef CONFIG_ENV_IS_IN_EEPROM
+#define CONFIG_ENV_OFFSET		0	/* environment starts at the beginning of the EEPROM */
+#define CONFIG_ENV_SIZE		0x1000	/* 4096 bytes may be used for env vars */
 #endif
 
 /*
@@ -170,76 +172,77 @@
  * the NAND controller.	sr - 2006-08-25
  */
 #if defined (CONFIG_NAND_U_BOOT)
-#define CFG_NAND_BOOT_SPL_SRC	0xfffff000	/* SPL location                 */
-#define CFG_NAND_BOOT_SPL_SIZE	(4 << 10)	/* SPL size                     */
-#define CFG_NAND_BOOT_SPL_DST	(CFG_OCM_BASE + (12 << 10)) /* Copy SPL here    */
-#define CFG_NAND_U_BOOT_DST	0x01000000	/* Load NUB to this addr        */
-#define CFG_NAND_U_BOOT_START	CFG_NAND_U_BOOT_DST /* Start NUB from this addr */
-#define CFG_NAND_BOOT_SPL_DELTA	(CFG_NAND_BOOT_SPL_SRC - CFG_NAND_BOOT_SPL_DST)
+#define CONFIG_SYS_NAND_BOOT_SPL_SRC	0xfffff000	/* SPL location                 */
+#define CONFIG_SYS_NAND_BOOT_SPL_SIZE	(4 << 10)	/* SPL size                     */
+#define CONFIG_SYS_NAND_BOOT_SPL_DST	(CONFIG_SYS_OCM_BASE + (12 << 10)) /* Copy SPL here    */
+#define CONFIG_SYS_NAND_U_BOOT_DST	0x01000000	/* Load NUB to this addr        */
+#define CONFIG_SYS_NAND_U_BOOT_START	CONFIG_SYS_NAND_U_BOOT_DST /* Start NUB from this addr */
+#define CONFIG_SYS_NAND_BOOT_SPL_DELTA	(CONFIG_SYS_NAND_BOOT_SPL_SRC - CONFIG_SYS_NAND_BOOT_SPL_DST)
 
 /*
  * Define the partitioning of the NAND chip (only RAM U-Boot is needed here)
  */
-#define CFG_NAND_U_BOOT_OFFS	(16 << 10)	/* Offset to RAM U-Boot image   */
-#define CFG_NAND_U_BOOT_SIZE	(384 << 10)	/* Size of RAM U-Boot image     */
+#define CONFIG_SYS_NAND_U_BOOT_OFFS	(16 << 10)	/* Offset to RAM U-Boot image   */
+#define CONFIG_SYS_NAND_U_BOOT_SIZE	(384 << 10)	/* Size of RAM U-Boot image     */
 
 /*
  * Now the NAND chip has to be defined (no autodetection used!)
  */
-#define CFG_NAND_PAGE_SIZE	512	/* NAND chip page size          */
-#define CFG_NAND_BLOCK_SIZE	(16 << 10) /* NAND chip block size      */
-#define CFG_NAND_PAGE_COUNT	32	/* NAND chip page count         */
-#define CFG_NAND_BAD_BLOCK_POS	5	/* Location of bad block marker */
-#undef CFG_NAND_4_ADDR_CYCLE		/* No fourth addr used (<=32MB) */
-
-#define CFG_NAND_ECCSIZE	256
-#define CFG_NAND_ECCBYTES	3
-#define CFG_NAND_ECCSTEPS	(CFG_NAND_PAGE_SIZE / CFG_NAND_ECCSIZE)
-#define CFG_NAND_OOBSIZE	16
-#define CFG_NAND_ECCTOTAL	(CFG_NAND_ECCBYTES * CFG_NAND_ECCSTEPS)
-#define CFG_NAND_ECCPOS		{0, 1, 2, 3, 6, 7}
+#define CONFIG_SYS_NAND_PAGE_SIZE	512	/* NAND chip page size          */
+#define CONFIG_SYS_NAND_BLOCK_SIZE	(16 << 10) /* NAND chip block size      */
+#define CONFIG_SYS_NAND_PAGE_COUNT	32	/* NAND chip page count         */
+#define CONFIG_SYS_NAND_BAD_BLOCK_POS	5	/* Location of bad block marker */
+#undef CONFIG_SYS_NAND_4_ADDR_CYCLE		/* No fourth addr used (<=32MB) */
+
+#define CONFIG_SYS_NAND_ECCSIZE	256
+#define CONFIG_SYS_NAND_ECCBYTES	3
+#define CONFIG_SYS_NAND_ECCSTEPS	(CONFIG_SYS_NAND_PAGE_SIZE / CONFIG_SYS_NAND_ECCSIZE)
+#define CONFIG_SYS_NAND_OOBSIZE	16
+#define CONFIG_SYS_NAND_ECCTOTAL	(CONFIG_SYS_NAND_ECCBYTES * CONFIG_SYS_NAND_ECCSTEPS)
+#define CONFIG_SYS_NAND_ECCPOS		{0, 1, 2, 3, 6, 7}
 #endif
 
-#ifdef CFG_ENV_IS_IN_NAND
+#ifdef CONFIG_ENV_IS_IN_NAND
 /*
  * For NAND booting the environment is embedded in the U-Boot image. Please take
  * look at the file board/amcc/sequoia/u-boot-nand.lds for details.
  */
-#define CFG_ENV_SIZE		CFG_NAND_BLOCK_SIZE
-#define CFG_ENV_OFFSET		(CFG_NAND_U_BOOT_OFFS + CFG_ENV_SIZE)
-#define CFG_ENV_OFFSET_REDUND	(CFG_ENV_OFFSET + CFG_ENV_SIZE)
+#define CONFIG_ENV_SIZE		CONFIG_SYS_NAND_BLOCK_SIZE
+#define CONFIG_ENV_OFFSET		(CONFIG_SYS_NAND_U_BOOT_OFFS + CONFIG_ENV_SIZE)
+#define CONFIG_ENV_OFFSET_REDUND	(CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)
 #endif
 
 /*-----------------------------------------------------------------------
  * DDR SDRAM
  *----------------------------------------------------------------------*/
-#define CFG_MBYTES_SDRAM	(256)	/* 256MB                        */
+#define CONFIG_SYS_MBYTES_SDRAM	(256)	/* 256MB                        */
 #if !defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL)
 #define CONFIG_DDR_DATA_EYE	/* use DDR2 optimization        */
 #endif
+#define CONFIG_SYS_MEM_TOP_HIDE	(4 << 10) /* don't use last 4kbytes */
+						  /* 440EPx errata CHIP 11 */
 
 /*-----------------------------------------------------------------------
  * I2C
  *----------------------------------------------------------------------*/
 #define CONFIG_HARD_I2C		1	/* I2C with hardware support    */
 #undef	CONFIG_SOFT_I2C		/* I2C bit-banged               */
-#define CFG_I2C_SPEED		100000	/* I2C speed and slave address  */
-#define CFG_I2C_SLAVE		0x7F
+#define CONFIG_SYS_I2C_SPEED		400000	/* I2C speed and slave address  */
+#define CONFIG_SYS_I2C_SLAVE		0x7F
 
 #define CONFIG_I2C_CMD_TREE	1
 #define CONFIG_I2C_MULTI_BUS	1
 
-#define CFG_I2C_MULTI_EEPROMS
+#define CONFIG_SYS_I2C_MULTI_EEPROMS
 
-#define CFG_I2C_EEPROM_ADDR		0x54
-#define CFG_I2C_EEPROM_ADDR_LEN		2
-#define CFG_EEPROM_PAGE_WRITE_ENABLE
-#define CFG_EEPROM_PAGE_WRITE_BITS	5
-#define CFG_EEPROM_PAGE_WRITE_DELAY_MS	10
-#define CFG_I2C_EEPROM_ADDR_OVERFLOW	0x01
+#define CONFIG_SYS_I2C_EEPROM_ADDR		0x54
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN		2
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS	5
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	10
+#define CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW	0x01
 
-#define CFG_EEPROM_WREN			1
-#define CFG_I2C_BOOT_EEPROM_ADDR	0x52
+#define CONFIG_SYS_EEPROM_WREN			1
+#define CONFIG_SYS_I2C_BOOT_EEPROM_ADDR	0x52
 
 /*
  * standard dtt sensor configuration - bottom bit will determine local or
@@ -259,47 +262,60 @@
  * - remote temp sensor enabled, min set to 0 deg, max set to 70 deg
  */
 #define CONFIG_DTT_ADM1021
-#define CFG_DTT_ADM1021		{ { 0x4c, 0x02, 0, 1, 70, 0, 1, 70, 0} }
+#define CONFIG_SYS_DTT_ADM1021		{ { 0x4c, 0x02, 0, 1, 70, 0, 1, 70, 0} }
 
-#define CONFIG_PREBOOT		/* enable preboot variable */
+#define CONFIG_PREBOOT		"echo Add \\\"run fpga\\\" and "	\
+				"\\\"painit\\\" to preboot command"
 
 #undef	CONFIG_BOOTARGS
 
 /* Setup some board specific values for the default environment variables */
 #define CONFIG_HOSTNAME		pmc440
-#define CFG_BOOTFILE		"bootfile=/tftpboot/pmc440/uImage\0"
-#define CFG_ROOTPATH		"rootpath=/opt/eldk_410/ppc_4xx\0"
+#define CONFIG_SYS_BOOTFILE	"bootfile=/tftpboot/pmc440/uImage\0"
+#define CONFIG_SYS_ROOTPATH	"rootpath=/opt/eldk/ppc_4xxFP\0"
 
 #define CONFIG_EXTRA_ENV_SETTINGS					\
-	CFG_BOOTFILE							\
-	CFG_ROOTPATH							\
+	CONFIG_SYS_BOOTFILE						\
+	CONFIG_SYS_ROOTPATH						\
+	"fdt_file=/tftpboot/pmc440/pmc440.dtb\0"			\
 	"netdev=eth0\0"							\
 	"ethrotate=no\0"						\
 	"nfsargs=setenv bootargs root=/dev/nfs rw "			\
 	"nfsroot=${serverip}:${rootpath}\0"				\
 	"ramargs=setenv bootargs root=/dev/ram rw\0"			\
 	"addip=setenv bootargs ${bootargs} "				\
-	"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"		\
-	":${hostname}:${netdev}:off panic=1\0"				\
+		"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"	\
+		":${hostname}:${netdev}:off panic=1\0"			\
 	"addtty=setenv bootargs ${bootargs} console=ttyS0,${baudrate}\0" \
-	"flash_nfs=run nfsargs addip addtty;"				\
-	"bootm ${kernel_addr}\0"					\
-	"flash_self=run ramargs addip addtty;"				\
-	"bootm ${kernel_addr} ${ramdisk_addr}\0"			\
-	"net_nfs=tftp 200000 ${bootfile};run nfsargs addip addtty;"     \
-	"bootm\0"							\
-	"kernel_addr=FC000000\0"					\
-	"ramdisk_addr=FC180000\0"					\
+	"addmisc=setenv bootargs ${bootargs} mem=${mem}\0"		\
+	"nandargs=setenv bootargs root=/dev/mtdblock6 rootfstype=jffs2 rw\0" \
+	"nand_boot=run nandargs addip addtty addmisc;bootm ${kernel_addr}\0" \
+	"nand_boot_fdt=run nandargs addip addtty addmisc;"		\
+		"bootm ${kernel_addr} - ${fdt_addr}\0"			\
+	"net_nfs=tftp ${kernel_addr_r} ${bootfile};"			\
+		"run nfsargs addip addtty addmisc;"			\
+		"bootm\0"						\
+	"net_nfs_fdt=tftp ${kernel_addr_r} ${bootfile};"		\
+		"tftp  ${fdt_addr_r} ${fdt_file};"			\
+		"run nfsargs addip addtty addmisc;"			\
+		"bootm ${kernel_addr_r} - ${fdt_addr_r}\0"		\
+	"kernel_addr=ffc00000\0"					\
+	"kernel_addr_r=200000\0"					\
+	"fpga_addr=fff00000\0"						\
+	"fdt_addr=fff80000\0"						\
+	"fdt_addr_r=800000\0"						\
+	"fpga=fpga loadb 0 ${fpga_addr}\0"				\
 	"load=tftp 200000 /tftpboot/pmc440/u-boot.bin\0"		\
-	"update=protect off FFFA0000 FFFFFFFF;era FFFA0000 FFFFFFFF;"	\
-	"cp.b 200000 FFFA0000 60000\0"					\
+	"update=protect off fffa0000 ffffffff;era fffa0000 ffffffff;"	\
+		"cp.b 200000 fffa0000 60000\0"				\
 	""
 
 #define CONFIG_BOOTDELAY	3	/* autoboot after 3 seconds     */
 
 #define CONFIG_LOADS_ECHO	1	/* echo on for serial download  */
-#define CFG_LOADS_BAUD_CHANGE	1	/* allow baudrate change        */
+#define CONFIG_SYS_LOADS_BAUD_CHANGE	1	/* allow baudrate change        */
 
+#define CONFIG_PPC4xx_EMAC
 #define CONFIG_IBM_EMAC4_V4	1
 #define CONFIG_MII		1	/* MII PHY management           */
 #define CONFIG_PHY_ADDR		0	/* PHY address, See schematics  */
@@ -307,7 +323,7 @@
 #define CONFIG_PHY_GIGE		1	/* Include GbE speed/duplex detection */
 
 #define CONFIG_HAS_ETH0
-#define CFG_RX_ETH_BUFFER	32	/* Number of ethernet rx buffers & descriptors */
+#define CONFIG_SYS_RX_ETH_BUFFER	32	/* Number of ethernet rx buffers & descriptors */
 
 #define CONFIG_NET_MULTI	1
 #define CONFIG_HAS_ETH1		1	/* add support for "eth1addr"   */
@@ -317,13 +333,13 @@
 /* USB */
 #define CONFIG_USB_OHCI_NEW
 #define CONFIG_USB_STORAGE
-#define CFG_OHCI_BE_CONTROLLER
+#define CONFIG_SYS_OHCI_BE_CONTROLLER
 
-#define CFG_USB_OHCI_BOARD_INIT 1
-#define CFG_USB_OHCI_CPU_INIT	1
-#define CFG_USB_OHCI_REGS_BASE	CFG_USB_HOST
-#define CFG_USB_OHCI_SLOT_NAME	"ppc440"
-#define CFG_USB_OHCI_MAX_ROOT_PORTS	15
+#define CONFIG_SYS_USB_OHCI_BOARD_INIT 1
+#define CONFIG_SYS_USB_OHCI_CPU_INIT	1
+#define CONFIG_SYS_USB_OHCI_REGS_BASE	CONFIG_SYS_USB_HOST
+#define CONFIG_SYS_USB_OHCI_SLOT_NAME	"ppc440"
+#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS	15
 
 /* Comment this out to enable USB 1.1 device */
 #define USB_2_0_DEVICE
@@ -357,50 +373,44 @@
 #define CONFIG_CMD_SDRAM
 
 /* POST support */
-#define CONFIG_POST		(CFG_POST_MEMORY |	\
-				 CFG_POST_CPU    |	\
-				 CFG_POST_UART   |	\
-				 CFG_POST_I2C    |	\
-				 CFG_POST_CACHE  |	\
-				 CFG_POST_FPU    |	\
-				 CFG_POST_ETHER  |	\
-				 CFG_POST_SPR)
-
-#define CFG_POST_WORD_ADDR	(CFG_GBL_DATA_OFFSET - 0x4)
-
-/* esd expects pram at end of physical memory.
- * So no logbuffer at the moment.
- */
-#if 0
+#define CONFIG_POST		(CONFIG_SYS_POST_MEMORY |	\
+				 CONFIG_SYS_POST_CPU    |	\
+				 CONFIG_SYS_POST_UART   |	\
+				 CONFIG_SYS_POST_I2C    |	\
+				 CONFIG_SYS_POST_CACHE  |	\
+				 CONFIG_SYS_POST_FPU    |	\
+				 CONFIG_SYS_POST_ETHER  |	\
+				 CONFIG_SYS_POST_SPR)
+
+#define CONFIG_SYS_POST_WORD_ADDR	(CONFIG_SYS_GBL_DATA_OFFSET - 0x4)
 #define CONFIG_LOGBUFFER
-#endif
-#define CFG_POST_CACHE_ADDR	0x10000000	/* free virtual address     */
+#define CONFIG_SYS_POST_CACHE_ADDR	0x7fff0000	/* free virtual address     */
 
-#define CFG_CONSOLE_IS_IN_ENV	/* Otherwise it catches logbuffer as output */
+#define CONFIG_SYS_CONSOLE_IS_IN_ENV	/* Otherwise it catches logbuffer as output */
 
 #define CONFIG_SUPPORT_VFAT
 
 /*-----------------------------------------------------------------------
  * Miscellaneous configurable options
  *----------------------------------------------------------------------*/
-#define CFG_LONGHELP			/* undef to save memory         */
-#define CFG_PROMPT		"=> "	/* Monitor Command Prompt       */
+#define CONFIG_SYS_LONGHELP			/* undef to save memory         */
+#define CONFIG_SYS_PROMPT		"=> "	/* Monitor Command Prompt       */
 #if defined(CONFIG_CMD_KGDB)
-#define CFG_CBSIZE		1024	/* Console I/O Buffer Size      */
+#define CONFIG_SYS_CBSIZE		1024	/* Console I/O Buffer Size      */
 #else
-#define CFG_CBSIZE		256	/* Console I/O Buffer Size      */
+#define CONFIG_SYS_CBSIZE		256	/* Console I/O Buffer Size      */
 #endif
-#define CFG_PBSIZE		(CFG_CBSIZE+sizeof(CFG_PROMPT)+16)
-#define CFG_MAXARGS		16	/* max number of command args   */
-#define CFG_BARGSIZE		CFG_CBSIZE	/* Boot Argument Buffer Size */
+#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
+#define CONFIG_SYS_MAXARGS		16	/* max number of command args   */
+#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size */
 
-#define CFG_MEMTEST_START	0x0400000	/* memtest works on          */
-#define CFG_MEMTEST_END		0x0C00000	/* 4 ... 12 MB in DRAM       */
+#define CONFIG_SYS_MEMTEST_START	0x0400000	/* memtest works on          */
+#define CONFIG_SYS_MEMTEST_END		0x0C00000	/* 4 ... 12 MB in DRAM       */
 
-#define CFG_LOAD_ADDR		0x100000	/* default load address      */
-#define CFG_EXTBDINFO		1	/* To use extended board_into (bd_t) */
+#define CONFIG_SYS_LOAD_ADDR		0x100000	/* default load address      */
+#define CONFIG_SYS_EXTBDINFO		1	/* To use extended board_into (bd_t) */
 
-#define CFG_HZ			1000	/* decrementer freq: 1 ms ticks */
+#define CONFIG_SYS_HZ			1000	/* decrementer freq: 1 ms ticks */
 
 #define CONFIG_CMDLINE_EDITING	1	/* add command line history     */
 #define CONFIG_LOOPW		1	/* enable loopw command         */
@@ -420,27 +430,27 @@
 /* General PCI */
 #define CONFIG_PCI		/* include pci support          */
 #define CONFIG_PCI_PNP		/* do (not) pci plug-and-play   */
-#define CFG_PCI_CACHE_LINE_SIZE	0	/* to avoid problems with PNP   */
+#define CONFIG_SYS_PCI_CACHE_LINE_SIZE	0	/* to avoid problems with PNP   */
 #define CONFIG_PCI_SCAN_SHOW	/* show pci devices on startup  */
-#define CFG_PCI_TARGBASE	0x80000000 /* PCIaddr mapped to CFG_PCI_MEMBASE */
+#define CONFIG_SYS_PCI_TARGBASE	0x80000000 /* PCIaddr mapped to CONFIG_SYS_PCI_MEMBASE */
 
 /* Board-specific PCI */
-#define CFG_PCI_TARGET_INIT
-#define CFG_PCI_MASTER_INIT
+#define CONFIG_SYS_PCI_TARGET_INIT
+#define CONFIG_SYS_PCI_MASTER_INIT
 
 /* PCI identification */
-#define CFG_PCI_SUBSYS_VENDORID 0x12FE	/* PCI Vendor ID: esd gmbh      */
-#define CFG_PCI_SUBSYS_ID_NONMONARCH 0x0441	/* PCI Device ID: Non-Monarch */
-#define CFG_PCI_SUBSYS_ID_MONARCH 0x0440	/* PCI Device ID: Monarch */
-#define CFG_PCI_CLASSCODE_NONMONARCH	PCI_CLASS_PROCESSOR_POWERPC
-#define CFG_PCI_CLASSCODE_MONARCH	PCI_CLASS_BRIDGE_HOST
+#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x12FE	/* PCI Vendor ID: esd gmbh      */
+#define CONFIG_SYS_PCI_SUBSYS_ID_NONMONARCH 0x0441	/* PCI Device ID: Non-Monarch */
+#define CONFIG_SYS_PCI_SUBSYS_ID_MONARCH 0x0440	/* PCI Device ID: Monarch */
+#define CONFIG_SYS_PCI_CLASSCODE_NONMONARCH	PCI_CLASS_PROCESSOR_POWERPC
+#define CONFIG_SYS_PCI_CLASSCODE_MONARCH	PCI_CLASS_BRIDGE_HOST
 
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
+#define CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
 
 /*-----------------------------------------------------------------------
  * FPGA stuff
@@ -459,42 +469,46 @@
  * On Sequoia CS0 and CS3 are switched when configuring for NAND booting
  */
 #if !defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL)
-#define CFG_NAND_CS		2	/* NAND chip connected to CSx   */
+#define CONFIG_SYS_NAND_CS		2	/* NAND chip connected to CSx   */
 
 /* Memory Bank 0 (NOR-FLASH) initialization */
-#define CFG_EBC_PB0AP		0x03017200
-#define CFG_EBC_PB0CR		(CFG_FLASH_BASE | 0xda000)
+#define CONFIG_SYS_EBC_PB0AP		0x03017200
+#define CONFIG_SYS_EBC_PB0CR		(CONFIG_SYS_FLASH_BASE | 0xda000)
 
 /* Memory Bank 2 (NAND-FLASH) initialization */
-#define CFG_EBC_PB2AP		0x018003c0
-#define CFG_EBC_PB2CR		(CFG_NAND_ADDR | 0x1c000)
+#define CONFIG_SYS_EBC_PB2AP		0x018003c0
+#define CONFIG_SYS_EBC_PB2CR		(CONFIG_SYS_NAND_ADDR | 0x1c000)
 #else
-#define CFG_NAND_CS		0	/* NAND chip connected to CSx   */
+#define CONFIG_SYS_NAND_CS		0	/* NAND chip connected to CSx   */
 /* Memory Bank 2 (NOR-FLASH) initialization */
-#define CFG_EBC_PB2AP		0x03017200
-#define CFG_EBC_PB2CR		(CFG_FLASH_BASE | 0xda000)
+#define CONFIG_SYS_EBC_PB2AP		0x03017200
+#define CONFIG_SYS_EBC_PB2CR		(CONFIG_SYS_FLASH_BASE | 0xda000)
 
 /* Memory Bank 0 (NAND-FLASH) initialization */
-#define CFG_EBC_PB0AP		0x018003c0
-#define CFG_EBC_PB0CR		(CFG_NAND_ADDR | 0x1c000)
+#define CONFIG_SYS_EBC_PB0AP		0x018003c0
+#define CONFIG_SYS_EBC_PB0CR		(CONFIG_SYS_NAND_ADDR | 0x1c000)
 #endif
 
+/* Memory Bank 1 (RESET) initialization */
+#define CONFIG_SYS_EBC_PB1AP		0x7f817200 /* 0x03017200 */
+#define CONFIG_SYS_EBC_PB1CR		(CONFIG_SYS_RESET_BASE | 0x1c000)
+
 /* Memory Bank 4 (FPGA / 32Bit) initialization */
-#define CFG_EBC_PB4AP		0x03840f40	/* BME=0,TWT=7,CSN=1,TH=7,RE=1,SOR=0,BEM=1 */
-#define CFG_EBC_PB4CR		(CFG_FPGA_BASE0 | 0x1c000)	/* BS=1M,BU=R/W,BW=32bit */
+#define CONFIG_SYS_EBC_PB4AP		0x03840f40	/* BME=0,TWT=7,CSN=1,TH=7,RE=1,SOR=0,BEM=1 */
+#define CONFIG_SYS_EBC_PB4CR		(CONFIG_SYS_FPGA_BASE0 | 0x1c000)	/* BS=1M,BU=R/W,BW=32bit */
 
 /* Memory Bank 5 (FPGA / 16Bit) initialization */
-#define CFG_EBC_PB5AP		0x03840f40	/* BME=0,TWT=3,CSN=1,TH=0,RE=1,SOR=0,BEM=1 */
-#define CFG_EBC_PB5CR		(CFG_FPGA_BASE1 | 0x1a000)	/* BS=1M,BU=R/W,BW=16bit */
+#define CONFIG_SYS_EBC_PB5AP		0x03840f40	/* BME=0,TWT=3,CSN=1,TH=0,RE=1,SOR=0,BEM=1 */
+#define CONFIG_SYS_EBC_PB5CR		(CONFIG_SYS_FPGA_BASE1 | 0x1a000)	/* BS=1M,BU=R/W,BW=16bit */
 
 /*-----------------------------------------------------------------------
  * NAND FLASH
  *----------------------------------------------------------------------*/
-#define CFG_MAX_NAND_DEVICE	1
+#define CONFIG_SYS_MAX_NAND_DEVICE	1
 #define NAND_MAX_CHIPS		1
-#define CFG_NAND_BASE		(CFG_NAND_ADDR + CFG_NAND_CS)
-#define CFG_NAND_SELECT_DEVICE	1 /* nand driver supports mutipl. chips */
-#define CFG_NAND_QUIET_TEST	1
+#define CONFIG_SYS_NAND_BASE		(CONFIG_SYS_NAND_ADDR + CONFIG_SYS_NAND_CS)
+#define CONFIG_SYS_NAND_SELECT_DEVICE	1 /* nand driver supports mutipl. chips */
+#define CONFIG_SYS_NAND_QUIET_TEST	1
 
 /*
  * Internal Definitions
@@ -513,4 +527,6 @@
 #define CONFIG_OF_LIBFDT	1
 #define CONFIG_OF_BOARD_SETUP	1
 
+#define CONFIG_API		1
+
 #endif /* __CONFIG_H */
diff --git a/include/configs/PN62.h b/include/configs/PN62.h
index da7d8b82b..2c0774fea 100644
--- a/include/configs/PN62.h
+++ b/include/configs/PN62.h
@@ -99,14 +99,14 @@
 /*
  * Miscellaneous configurable options
  */
-#define CFG_LONGHELP		1		/* undef to save memory		*/
-#define CFG_PROMPT		"=> "		/* Monitor Command Prompt	*/
-#define CFG_CBSIZE		256		/* Console I/O Buffer Size	*/
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16)	/* Print Buffer Size	*/
-#define CFG_MAXARGS		16		/* max number of command args	*/
-#define CFG_BARGSIZE		CFG_CBSIZE	/* Boot Argument Buffer Size	*/
-#define CFG_LOAD_ADDR		0x00100000	/* default load address		*/
-#define CFG_HZ			1000		/* decrementer freq: 1 ms ticks */
+#define CONFIG_SYS_LONGHELP		1		/* undef to save memory		*/
+#define CONFIG_SYS_PROMPT		"=> "		/* Monitor Command Prompt	*/
+#define CONFIG_SYS_CBSIZE		256		/* Console I/O Buffer Size	*/
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)	/* Print Buffer Size	*/
+#define CONFIG_SYS_MAXARGS		16		/* max number of command args	*/
+#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
+#define CONFIG_SYS_LOAD_ADDR		0x00100000	/* default load address		*/
+#define CONFIG_SYS_HZ			1000		/* decrementer freq: 1 ms ticks */
 
 #define CONFIG_PRAM		1024		/* reserve 1 MB protected RAM	*/
 
@@ -139,50 +139,50 @@
 /*
  * Start addresses for the final memory configuration
  * (Set up by the startup code)
- * Please note that CFG_SDRAM_BASE _must_ start at 0
+ * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
  */
-#define CFG_SDRAM_BASE		0x00000000
-#define CFG_MAX_RAM_SIZE	0x10000000
+#define CONFIG_SYS_SDRAM_BASE		0x00000000
+#define CONFIG_SYS_MAX_RAM_SIZE	0x10000000
 
-#define CFG_RESET_ADDRESS	0xfff00100
+#define CONFIG_SYS_RESET_ADDRESS	0xfff00100
 
-#undef	CFG_RAMBOOT
-#define CFG_MONITOR_LEN		0x00030000
-#define CFG_MONITOR_BASE	TEXT_BASE
+#undef	CONFIG_SYS_RAMBOOT
+#define CONFIG_SYS_MONITOR_LEN		0x00030000
+#define CONFIG_SYS_MONITOR_BASE	TEXT_BASE
 
-/*#define CFG_GBL_DATA_SIZE    256*/
-#define CFG_GBL_DATA_SIZE	128
+/*#define CONFIG_SYS_GBL_DATA_SIZE    256*/
+#define CONFIG_SYS_GBL_DATA_SIZE	128
 
-#define CFG_INIT_RAM_ADDR	0x40000000
-#define CFG_INIT_RAM_END	0x1000
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_RAM_ADDR	0x40000000
+#define CONFIG_SYS_INIT_RAM_END	0x1000
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
 
 
-#define CFG_NO_FLASH		1		/* There is no FLASH memory	*/
+#define CONFIG_SYS_NO_FLASH		1		/* There is no FLASH memory	*/
 
-#define CFG_ENV_IS_NOWHERE	1		/* Store ENV in memory only	*/
-#define CFG_ENV_OFFSET		0x00004000	/* Offset of Environment Sector */
-#define CFG_ENV_SIZE		0x00002000	/* Total Size of Environment Sector */
+#define CONFIG_ENV_IS_NOWHERE	1		/* Store ENV in memory only	*/
+#define CONFIG_ENV_OFFSET		0x00004000	/* Offset of Environment Sector */
+#define CONFIG_ENV_SIZE		0x00002000	/* Total Size of Environment Sector */
 
-#define CFG_MALLOC_LEN		(512 << 10)	/* Reserve 512 kB for malloc()	*/
+#define CONFIG_SYS_MALLOC_LEN		(512 << 10)	/* Reserve 512 kB for malloc()	*/
 
-#define CFG_MEMTEST_START	0x00004000	/* memtest works on		*/
-#define CFG_MEMTEST_END		0x01f00000	/* 0 ... 32 MB in DRAM		*/
+#define CONFIG_SYS_MEMTEST_START	0x00004000	/* memtest works on		*/
+#define CONFIG_SYS_MEMTEST_END		0x01f00000	/* 0 ... 32 MB in DRAM		*/
 
 /*
  * Serial port configuration
  */
-#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
 
-#define CFG_NS16550
-#define CFG_NS16550_SERIAL
+#define CONFIG_SYS_NS16550
+#define CONFIG_SYS_NS16550_SERIAL
 
-#define CFG_NS16550_REG_SIZE	1
+#define CONFIG_SYS_NS16550_REG_SIZE	1
 
-#define CFG_NS16550_CLK		1843200
+#define CONFIG_SYS_NS16550_CLK		1843200
 
-#define CFG_NS16550_COM1	0xff800008
-#define CFG_NS16550_COM2	0xff800000
+#define CONFIG_SYS_NS16550_COM1	0xff800008
+#define CONFIG_SYS_NS16550_COM2	0xff800000
 
 /*
  * Low Level Configuration Settings
@@ -193,30 +193,30 @@
 #define CONFIG_SYS_CLK_FREQ  33333333	/* external frequency to pll */
 #define CONFIG_PLL_PCI_TO_MEM_MULTIPLIER  3
 
-#define CFG_EUMB_ADDR		0xFCE00000
+#define CONFIG_SYS_EUMB_ADDR		0xFCE00000
 
 /* MCCR1 */
-#define CFG_ROMNAL		3	/* rom/flash next access time		*/
-#define CFG_ROMFAL		7	/* rom/flash access time		*/
+#define CONFIG_SYS_ROMNAL		3	/* rom/flash next access time		*/
+#define CONFIG_SYS_ROMFAL		7	/* rom/flash access time		*/
 
 /* MCCR2 */
-#define CFG_ASRISE		6	/* ASRISE in clocks			*/
-#define CFG_ASFALL		12	/* ASFALL in clocks			*/
-#define CFG_REFINT		5600	/* REFINT in clocks			*/
+#define CONFIG_SYS_ASRISE		6	/* ASRISE in clocks			*/
+#define CONFIG_SYS_ASFALL		12	/* ASFALL in clocks			*/
+#define CONFIG_SYS_REFINT		5600	/* REFINT in clocks			*/
 
 /* MCCR3 */
-#define CFG_BSTOPRE		0x3cf	/* Burst To Precharge			*/
-#define CFG_REFREC		2	/* Refresh to activate interval		*/
-#define CFG_RDLAT		3	/* data latency from read command	*/
+#define CONFIG_SYS_BSTOPRE		0x3cf	/* Burst To Precharge			*/
+#define CONFIG_SYS_REFREC		2	/* Refresh to activate interval		*/
+#define CONFIG_SYS_RDLAT		3	/* data latency from read command	*/
 
 /* MCCR4 */
-#define CFG_PRETOACT		1	/* Precharge to activate interval	*/
-#define CFG_ACTTOPRE		3	/* Activate to Precharge interval	*/
-#define CFG_ACTORW		2	/* Activate to R/W			*/
-#define CFG_SDMODE_CAS_LAT	2	/* SDMODE CAS latency			*/
-#define CFG_SDMODE_WRAP		0	/* SDMODE Wrap type			*/
-#define CFG_SDMODE_BURSTLEN	2	/* SDMODE Burst length 2=4, 3=8		*/
-#define CFG_REGISTERD_TYPE_BUFFER   1
+#define CONFIG_SYS_PRETOACT		1	/* Precharge to activate interval	*/
+#define CONFIG_SYS_ACTTOPRE		3	/* Activate to Precharge interval	*/
+#define CONFIG_SYS_ACTORW		2	/* Activate to R/W			*/
+#define CONFIG_SYS_SDMODE_CAS_LAT	2	/* SDMODE CAS latency			*/
+#define CONFIG_SYS_SDMODE_WRAP		0	/* SDMODE Wrap type			*/
+#define CONFIG_SYS_SDMODE_BURSTLEN	2	/* SDMODE Burst length 2=4, 3=8		*/
+#define CONFIG_SYS_REGISTERD_TYPE_BUFFER   1
 
 /* Memory bank settings:
  *
@@ -225,80 +225,80 @@
  * bits will be set to 0x00000 for a start address, or 0xfffff for an
  * end address
  */
-#define CFG_BANK0_START		0x00000000
-#define CFG_BANK0_END		(CFG_MAX_RAM_SIZE - 1)
-#define CFG_BANK0_ENABLE	1
-#define CFG_BANK1_START		0x00000000
-#define CFG_BANK1_END		0x00000000
-#define CFG_BANK1_ENABLE	0
-#define CFG_BANK2_START		0x00000000
-#define CFG_BANK2_END		0x00000000
-#define CFG_BANK2_ENABLE	0
-#define CFG_BANK3_START		0x00000000
-#define CFG_BANK3_END		0x00000000
-#define CFG_BANK3_ENABLE	0
-#define CFG_BANK4_START		0x00000000
-#define CFG_BANK4_END		0x00000000
-#define CFG_BANK4_ENABLE	0
-#define CFG_BANK5_START		0x00000000
-#define CFG_BANK5_END		0x00000000
-#define CFG_BANK5_ENABLE	0
-#define CFG_BANK6_START		0x00000000
-#define CFG_BANK6_END		0x00000000
-#define CFG_BANK6_ENABLE	0
-#define CFG_BANK7_START		0x00000000
-#define CFG_BANK7_END		0x00000000
-#define CFG_BANK7_ENABLE	0
+#define CONFIG_SYS_BANK0_START		0x00000000
+#define CONFIG_SYS_BANK0_END		(CONFIG_SYS_MAX_RAM_SIZE - 1)
+#define CONFIG_SYS_BANK0_ENABLE	1
+#define CONFIG_SYS_BANK1_START		0x00000000
+#define CONFIG_SYS_BANK1_END		0x00000000
+#define CONFIG_SYS_BANK1_ENABLE	0
+#define CONFIG_SYS_BANK2_START		0x00000000
+#define CONFIG_SYS_BANK2_END		0x00000000
+#define CONFIG_SYS_BANK2_ENABLE	0
+#define CONFIG_SYS_BANK3_START		0x00000000
+#define CONFIG_SYS_BANK3_END		0x00000000
+#define CONFIG_SYS_BANK3_ENABLE	0
+#define CONFIG_SYS_BANK4_START		0x00000000
+#define CONFIG_SYS_BANK4_END		0x00000000
+#define CONFIG_SYS_BANK4_ENABLE	0
+#define CONFIG_SYS_BANK5_START		0x00000000
+#define CONFIG_SYS_BANK5_END		0x00000000
+#define CONFIG_SYS_BANK5_ENABLE	0
+#define CONFIG_SYS_BANK6_START		0x00000000
+#define CONFIG_SYS_BANK6_END		0x00000000
+#define CONFIG_SYS_BANK6_ENABLE	0
+#define CONFIG_SYS_BANK7_START		0x00000000
+#define CONFIG_SYS_BANK7_END		0x00000000
+#define CONFIG_SYS_BANK7_ENABLE	0
 
 /*
  * Memory bank enable bitmask, specifying which of the banks defined above
  * are actually present. MSB is for bank #7, LSB is for bank #0.
  */
-#define CFG_BANK_ENABLE		0x01
+#define CONFIG_SYS_BANK_ENABLE		0x01
 
-#define CFG_ODCR		0xff	/* configures line driver impedances,	*/
+#define CONFIG_SYS_ODCR		0xff	/* configures line driver impedances,	*/
 					/* see 8240 book for bit definitions	*/
-#define CFG_PGMAX		0x32	/* how long the 8240 retains the	*/
+#define CONFIG_SYS_PGMAX		0x32	/* how long the 8240 retains the	*/
 					/* currently accessed page in memory	*/
 					/* see 8240 book for details		*/
 
 /* SDRAM 0 - 256MB */
-#define CFG_IBAT0L	(CFG_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
-#define CFG_IBAT0U	(CFG_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CONFIG_SYS_IBAT0L	(CONFIG_SYS_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
+#define CONFIG_SYS_IBAT0U	(CONFIG_SYS_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
 
-#define CFG_IBAT1L	(CFG_INIT_RAM_ADDR | BATL_PP_10 | BATL_MEMCOHERENCE)
-#define CFG_IBAT1U	(CFG_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP)
+#define CONFIG_SYS_IBAT1L	(CONFIG_SYS_INIT_RAM_ADDR | BATL_PP_10 | BATL_MEMCOHERENCE)
+#define CONFIG_SYS_IBAT1U	(CONFIG_SYS_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP)
 
 /* PCI memory space */
-#define CFG_IBAT2L	(0x80000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
-#define CFG_IBAT2U	(0x80000000 | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CONFIG_SYS_IBAT2L	(0x80000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
+#define CONFIG_SYS_IBAT2U	(0x80000000 | BATU_BL_256M | BATU_VS | BATU_VP)
 
 /* Config addrs, etc */
-#define CFG_IBAT3L	(0xF0000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
-#define CFG_IBAT3U	(0xF0000000 | BATU_BL_256M | BATU_VS | BATU_VP)
-
-#define CFG_DBAT0L	CFG_IBAT0L
-#define CFG_DBAT0U	CFG_IBAT0U
-#define CFG_DBAT1L	CFG_IBAT1L
-#define CFG_DBAT1U	CFG_IBAT1U
-#define CFG_DBAT2L	CFG_IBAT2L
-#define CFG_DBAT2U	CFG_IBAT2U
-#define CFG_DBAT3L	CFG_IBAT3L
-#define CFG_DBAT3U	CFG_IBAT3U
+#define CONFIG_SYS_IBAT3L	(0xF0000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
+#define CONFIG_SYS_IBAT3U	(0xF0000000 | BATU_BL_256M | BATU_VS | BATU_VP)
+
+#define CONFIG_SYS_DBAT0L	CONFIG_SYS_IBAT0L
+#define CONFIG_SYS_DBAT0U	CONFIG_SYS_IBAT0U
+#define CONFIG_SYS_DBAT1L	CONFIG_SYS_IBAT1L
+#define CONFIG_SYS_DBAT1U	CONFIG_SYS_IBAT1U
+#define CONFIG_SYS_DBAT2L	CONFIG_SYS_IBAT2L
+#define CONFIG_SYS_DBAT2U	CONFIG_SYS_IBAT2U
+#define CONFIG_SYS_DBAT3L	CONFIG_SYS_IBAT3L
+#define CONFIG_SYS_DBAT3U	CONFIG_SYS_IBAT3U
 
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
+#define CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
 
 /*
  * Cache Configuration
  */
-#define CFG_CACHELINE_SIZE	32	/* For MPC8240 CPU			*/
+#define CONFIG_SYS_CACHELINE_SIZE	32	/* For MPC8240 CPU			*/
 #if defined(CONFIG_CMD_KGDB)
-#  define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value */
+#  define CONFIG_SYS_CACHELINE_SHIFT	5	/* log base 2 of the above value */
 #endif
 
 
diff --git a/include/configs/PPChameleonEVB.h b/include/configs/PPChameleonEVB.h
index cf9832434..09a96417f 100644
--- a/include/configs/PPChameleonEVB.h
+++ b/include/configs/PPChameleonEVB.h
@@ -63,7 +63,7 @@
 #define __DISABLE_MACHINE_EXCEPTION__
 
 #ifdef __DEBUG_START_FROM_SRAM__
-#define CFG_DUMMY_FLASH_SIZE		1024*1024*4
+#define CONFIG_SYS_DUMMY_FLASH_SIZE		1024*1024*4
 #endif
 
 /*
@@ -99,11 +99,12 @@
 #define CONFIG_ETH1ADDR 00:50:c2:1e:af:fd
 
 #define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
-#define CFG_LOADS_BAUD_CHANGE	1	/* allow baudrate change	*/
+#define CONFIG_SYS_LOADS_BAUD_CHANGE	1	/* allow baudrate change	*/
 
 #undef CONFIG_EXT_PHY
 #define CONFIG_NET_MULTI	1
 
+#define CONFIG_PPC4xx_EMAC
 #define CONFIG_MII		1	/* MII PHY management		*/
 #ifndef	 CONFIG_EXT_PHY
 #define CONFIG_PHY_ADDR		1	/* EMAC0 PHY address		*/
@@ -148,8 +149,8 @@
 #undef	CONFIG_WATCHDOG			/* watchdog disabled		*/
 
 #define CONFIG_RTC_M41T11	1	/* uses a M41T00 RTC		*/
-#define CFG_I2C_RTC_ADDR	0x68
-#define CFG_M41T11_BASE_YEAR	1900
+#define CONFIG_SYS_I2C_RTC_ADDR	0x68
+#define CONFIG_SYS_M41T11_BASE_YEAR	1900
 
 /*
  * SDRAM configuration (please see cpu/ppc/sdram.[ch])
@@ -157,52 +158,52 @@
 #define CONFIG_SDRAM_BANK0	1	/* init onboard SDRAM bank 0	*/
 
 /* SDRAM timings used in datasheet */
-#define CFG_SDRAM_CL            2
-#define CFG_SDRAM_tRP           20
-#define CFG_SDRAM_tRC           65
-#define CFG_SDRAM_tRCD          20
-#undef  CFG_SDRAM_tRFC
+#define CONFIG_SYS_SDRAM_CL            2
+#define CONFIG_SYS_SDRAM_tRP           20
+#define CONFIG_SYS_SDRAM_tRC           65
+#define CONFIG_SYS_SDRAM_tRCD          20
+#undef  CONFIG_SYS_SDRAM_tRFC
 
 /*
  * Miscellaneous configurable options
  */
-#define CFG_LONGHELP			/* undef to save memory		*/
-#define CFG_PROMPT		"=> "	/* Monitor Command Prompt	*/
+#define CONFIG_SYS_LONGHELP			/* undef to save memory		*/
+#define CONFIG_SYS_PROMPT		"=> "	/* Monitor Command Prompt	*/
 
-#undef	CFG_HUSH_PARSER			/* use "hush" command parser	*/
-#ifdef	CFG_HUSH_PARSER
-#define CFG_PROMPT_HUSH_PS2	"> "
+#undef	CONFIG_SYS_HUSH_PARSER			/* use "hush" command parser	*/
+#ifdef	CONFIG_SYS_HUSH_PARSER
+#define CONFIG_SYS_PROMPT_HUSH_PS2	"> "
 #endif
 
 #if defined(CONFIG_CMD_KGDB)
-#define CFG_CBSIZE	1024		/* Console I/O Buffer Size	*/
+#define CONFIG_SYS_CBSIZE	1024		/* Console I/O Buffer Size	*/
 #else
-#define CFG_CBSIZE	256		/* Console I/O Buffer Size	*/
+#define CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size	*/
 #endif
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define CFG_MAXARGS	16		/* max number of command args	*/
-#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS	16		/* max number of command args	*/
+#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
 
-#define CFG_DEVICE_NULLDEV	1	/* include nulldev device	*/
+#define CONFIG_SYS_DEVICE_NULLDEV	1	/* include nulldev device	*/
 
-#define CFG_CONSOLE_INFO_QUIET	1	/* don't print console @ startup*/
+#define CONFIG_SYS_CONSOLE_INFO_QUIET	1	/* don't print console @ startup*/
 
-#define CFG_MEMTEST_START	0x0400000	/* memtest works on	*/
-#define CFG_MEMTEST_END		0x0C00000	/* 4 ... 12 MB in DRAM	*/
+#define CONFIG_SYS_MEMTEST_START	0x0400000	/* memtest works on	*/
+#define CONFIG_SYS_MEMTEST_END		0x0C00000	/* 4 ... 12 MB in DRAM	*/
 
-#undef	CFG_EXT_SERIAL_CLOCK		/* no external serial clock used */
-#define CFG_IGNORE_405_UART_ERRATA_59	/* ignore ppc405gp errata #59	*/
-#define CFG_BASE_BAUD		691200
+#undef	CONFIG_SYS_EXT_SERIAL_CLOCK		/* no external serial clock used */
+#define CONFIG_SYS_IGNORE_405_UART_ERRATA_59	/* ignore ppc405gp errata #59	*/
+#define CONFIG_SYS_BASE_BAUD		691200
 
 /* The following table includes the supported baudrates */
-#define CFG_BAUDRATE_TABLE	\
+#define CONFIG_SYS_BAUDRATE_TABLE	\
 	{ 300, 600, 1200, 2400, 4800, 9600, 19200, 38400,     \
 	 57600, 115200, 230400, 460800, 921600 }
 
-#define CFG_LOAD_ADDR	0x100000	/* default load address */
-#define CFG_EXTBDINFO	1		/* To use extended board_into (bd_t) */
+#define CONFIG_SYS_LOAD_ADDR	0x100000	/* default load address */
+#define CONFIG_SYS_EXTBDINFO	1		/* To use extended board_into (bd_t) */
 
-#define CFG_HZ		1000		/* decrementer freq: 1 ms ticks */
+#define CONFIG_SYS_HZ		1000		/* decrementer freq: 1 ms ticks */
 
 #define CONFIG_ZERO_BOOTDELAY_CHECK	/* check for keypress on bootdelay==0 */
 
@@ -217,33 +218,33 @@
  */
 #define PPCHAMELON_NAND_TIMER_HACK
 
-#define CFG_NAND0_BASE 0xFF400000
-#define CFG_NAND1_BASE 0xFF000000
-#define CFG_NAND_BASE_LIST	{ CFG_NAND0_BASE, CFG_NAND1_BASE }
+#define CONFIG_SYS_NAND0_BASE 0xFF400000
+#define CONFIG_SYS_NAND1_BASE 0xFF000000
+#define CONFIG_SYS_NAND_BASE_LIST	{ CONFIG_SYS_NAND0_BASE, CONFIG_SYS_NAND1_BASE }
 #define NAND_BIG_DELAY_US	25
-#define CFG_MAX_NAND_DEVICE	2	/* Max number of NAND devices */
+#define CONFIG_SYS_MAX_NAND_DEVICE	2	/* Max number of NAND devices */
 
 #define NAND_MAX_CHIPS 1
 
-#define CFG_NAND0_CE  (0x80000000 >> 1)	 /* our CE is GPIO1 */
-#define CFG_NAND0_RDY (0x80000000 >> 4)	 /* our RDY is GPIO4 */
-#define CFG_NAND0_CLE (0x80000000 >> 2)	 /* our CLE is GPIO2 */
-#define CFG_NAND0_ALE (0x80000000 >> 3)	 /* our ALE is GPIO3 */
+#define CONFIG_SYS_NAND0_CE  (0x80000000 >> 1)	 /* our CE is GPIO1 */
+#define CONFIG_SYS_NAND0_RDY (0x80000000 >> 4)	 /* our RDY is GPIO4 */
+#define CONFIG_SYS_NAND0_CLE (0x80000000 >> 2)	 /* our CLE is GPIO2 */
+#define CONFIG_SYS_NAND0_ALE (0x80000000 >> 3)	 /* our ALE is GPIO3 */
 
-#define CFG_NAND1_CE  (0x80000000 >> 14)  /* our CE is GPIO14 */
-#define CFG_NAND1_RDY (0x80000000 >> 31)  /* our RDY is GPIO31 */
-#define CFG_NAND1_CLE (0x80000000 >> 15)  /* our CLE is GPIO15 */
-#define CFG_NAND1_ALE (0x80000000 >> 16)  /* our ALE is GPIO16 */
+#define CONFIG_SYS_NAND1_CE  (0x80000000 >> 14)  /* our CE is GPIO14 */
+#define CONFIG_SYS_NAND1_RDY (0x80000000 >> 31)  /* our RDY is GPIO31 */
+#define CONFIG_SYS_NAND1_CLE (0x80000000 >> 15)  /* our CLE is GPIO15 */
+#define CONFIG_SYS_NAND1_ALE (0x80000000 >> 16)  /* our ALE is GPIO16 */
 
 #define MACRO_NAND_DISABLE_CE(nandptr) do \
 { \
 	switch((unsigned long)nandptr) \
 	{ \
-	    case CFG_NAND0_BASE: \
-		out32(GPIO0_OR, in32(GPIO0_OR) | CFG_NAND0_CE); \
+	    case CONFIG_SYS_NAND0_BASE: \
+		out32(GPIO0_OR, in32(GPIO0_OR) | CONFIG_SYS_NAND0_CE); \
 		break; \
-	    case CFG_NAND1_BASE: \
-		out32(GPIO0_OR, in32(GPIO0_OR) | CFG_NAND1_CE); \
+	    case CONFIG_SYS_NAND1_BASE: \
+		out32(GPIO0_OR, in32(GPIO0_OR) | CONFIG_SYS_NAND1_CE); \
 		break; \
 	} \
 } while(0)
@@ -252,11 +253,11 @@
 { \
 	switch((unsigned long)nandptr) \
 	{ \
-	    case CFG_NAND0_BASE: \
-		out32(GPIO0_OR, in32(GPIO0_OR) & ~CFG_NAND0_CE); \
+	    case CONFIG_SYS_NAND0_BASE: \
+		out32(GPIO0_OR, in32(GPIO0_OR) & ~CONFIG_SYS_NAND0_CE); \
 		break; \
-	    case CFG_NAND1_BASE: \
-		out32(GPIO0_OR, in32(GPIO0_OR) & ~CFG_NAND1_CE); \
+	    case CONFIG_SYS_NAND1_BASE: \
+		out32(GPIO0_OR, in32(GPIO0_OR) & ~CONFIG_SYS_NAND1_CE); \
 		break; \
 	} \
 } while(0)
@@ -265,11 +266,11 @@
 { \
 	switch((unsigned long)nandptr) \
 	{ \
-	    case CFG_NAND0_BASE: \
-		out32(GPIO0_OR, in32(GPIO0_OR) & ~CFG_NAND0_ALE); \
+	    case CONFIG_SYS_NAND0_BASE: \
+		out32(GPIO0_OR, in32(GPIO0_OR) & ~CONFIG_SYS_NAND0_ALE); \
 		break; \
-	    case CFG_NAND1_BASE: \
-		out32(GPIO0_OR, in32(GPIO0_OR) & ~CFG_NAND1_ALE); \
+	    case CONFIG_SYS_NAND1_BASE: \
+		out32(GPIO0_OR, in32(GPIO0_OR) & ~CONFIG_SYS_NAND1_ALE); \
 		break; \
 	} \
 } while(0)
@@ -278,11 +279,11 @@
 { \
 	switch((unsigned long)nandptr) \
 	{ \
-	    case CFG_NAND0_BASE: \
-		out32(GPIO0_OR, in32(GPIO0_OR) | CFG_NAND0_ALE); \
+	    case CONFIG_SYS_NAND0_BASE: \
+		out32(GPIO0_OR, in32(GPIO0_OR) | CONFIG_SYS_NAND0_ALE); \
 		break; \
-	    case CFG_NAND1_BASE: \
-		out32(GPIO0_OR, in32(GPIO0_OR) | CFG_NAND1_ALE); \
+	    case CONFIG_SYS_NAND1_BASE: \
+		out32(GPIO0_OR, in32(GPIO0_OR) | CONFIG_SYS_NAND1_ALE); \
 		break; \
 	} \
 } while(0)
@@ -291,22 +292,22 @@
 { \
 	switch((unsigned long)nandptr) \
 	{ \
-	    case CFG_NAND0_BASE: \
-		out32(GPIO0_OR, in32(GPIO0_OR) & ~CFG_NAND0_CLE); \
+	    case CONFIG_SYS_NAND0_BASE: \
+		out32(GPIO0_OR, in32(GPIO0_OR) & ~CONFIG_SYS_NAND0_CLE); \
 		break; \
-	    case CFG_NAND1_BASE: \
-		out32(GPIO0_OR, in32(GPIO0_OR) & ~CFG_NAND1_CLE); \
+	    case CONFIG_SYS_NAND1_BASE: \
+		out32(GPIO0_OR, in32(GPIO0_OR) & ~CONFIG_SYS_NAND1_CLE); \
 		break; \
 	} \
 } while(0)
 
 #define MACRO_NAND_CTL_SETCLE(nandptr) do { \
 	switch((unsigned long)nandptr) { \
-	case CFG_NAND0_BASE: \
-		out32(GPIO0_OR, in32(GPIO0_OR) | CFG_NAND0_CLE); \
+	case CONFIG_SYS_NAND0_BASE: \
+		out32(GPIO0_OR, in32(GPIO0_OR) | CONFIG_SYS_NAND0_CLE); \
 		break; \
-	case CFG_NAND1_BASE: \
-		out32(GPIO0_OR, in32(GPIO0_OR) | CFG_NAND1_CLE); \
+	case CONFIG_SYS_NAND1_BASE: \
+		out32(GPIO0_OR, in32(GPIO0_OR) | CONFIG_SYS_NAND1_CLE); \
 		break; \
 	} \
 } while(0)
@@ -352,107 +353,106 @@
 
 #define CONFIG_PCI_SCAN_SHOW		/* print pci devices @ startup	*/
 
-#define CFG_PCI_SUBSYS_VENDORID 0x1014	/* PCI Vendor ID: IBM	*/
-#define CFG_PCI_SUBSYS_DEVICEID 0x0000	/* PCI Device ID: ---	*/
-#define CFG_PCI_CLASSCODE	0x0b20	/* PCI Class Code: Processor/PPC*/
+#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x1014	/* PCI Vendor ID: IBM	*/
+#define CONFIG_SYS_PCI_SUBSYS_DEVICEID 0x0000	/* PCI Device ID: ---	*/
+#define CONFIG_SYS_PCI_CLASSCODE	0x0b20	/* PCI Class Code: Processor/PPC*/
 
-#define CFG_PCI_PTM1LA	0x00000000	/* point to sdram		*/
-#define CFG_PCI_PTM1MS	0xfc000001	/* 64MB, enable hard-wired to 1 */
-#define CFG_PCI_PTM1PCI 0x00000000	/* Host: use this pci address	*/
-#define CFG_PCI_PTM2LA	0xffc00000	/* point to flash		*/
-#define CFG_PCI_PTM2MS	0xffc00001	/* 4MB, enable			*/
-#define CFG_PCI_PTM2PCI 0x04000000	/* Host: use this pci address	*/
+#define CONFIG_SYS_PCI_PTM1LA	0x00000000	/* point to sdram		*/
+#define CONFIG_SYS_PCI_PTM1MS	0xfc000001	/* 64MB, enable hard-wired to 1 */
+#define CONFIG_SYS_PCI_PTM1PCI 0x00000000	/* Host: use this pci address	*/
+#define CONFIG_SYS_PCI_PTM2LA	0xffc00000	/* point to flash		*/
+#define CONFIG_SYS_PCI_PTM2MS	0xffc00001	/* 4MB, enable			*/
+#define CONFIG_SYS_PCI_PTM2PCI 0x04000000	/* Host: use this pci address	*/
 
 /*-----------------------------------------------------------------------
  * Start addresses for the final memory configuration
  * (Set up by the startup code)
- * Please note that CFG_SDRAM_BASE _must_ start at 0
+ * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
  */
-#define CFG_SDRAM_BASE		0x00000000
+#define CONFIG_SYS_SDRAM_BASE		0x00000000
 
 /* Reserve 256 kB for Monitor	*/
 /*
-#define CFG_FLASH_BASE		0xFFFC0000
-#define CFG_MONITOR_BASE	CFG_FLASH_BASE
-#define CFG_MONITOR_LEN		(256 * 1024)
+#define CONFIG_SYS_FLASH_BASE		0xFFFC0000
+#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_FLASH_BASE
+#define CONFIG_SYS_MONITOR_LEN		(256 * 1024)
 */
 
 /* Reserve 320 kB for Monitor	*/
-#define CFG_FLASH_BASE		0xFFFB0000
-#define CFG_MONITOR_BASE	CFG_FLASH_BASE
-#define CFG_MONITOR_LEN		(320 * 1024)
+#define CONFIG_SYS_FLASH_BASE		0xFFFB0000
+#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_FLASH_BASE
+#define CONFIG_SYS_MONITOR_LEN		(320 * 1024)
 
-#define CFG_MALLOC_LEN		(256 * 1024)	/* Reserve 256 kB for malloc()	*/
+#define CONFIG_SYS_MALLOC_LEN		(256 * 1024)	/* Reserve 256 kB for malloc()	*/
 
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
+#define CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
 /*-----------------------------------------------------------------------
  * FLASH organization
  */
-#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
-#define CFG_MAX_FLASH_SECT	256	/* max number of sectors on one chip	*/
+#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
+#define CONFIG_SYS_MAX_FLASH_SECT	256	/* max number of sectors on one chip	*/
 
-#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
-#define CFG_FLASH_WRITE_TOUT	1000	/* Timeout for Flash Write (in ms)	*/
+#define CONFIG_SYS_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
+#define CONFIG_SYS_FLASH_WRITE_TOUT	1000	/* Timeout for Flash Write (in ms)	*/
 
-#define CFG_FLASH_WORD_SIZE	unsigned short	/* flash word size (width)	*/
-#define CFG_FLASH_ADDR0		0x5555	/* 1st address for flash config cycles	*/
-#define CFG_FLASH_ADDR1		0x2AAA	/* 2nd address for flash config cycles	*/
+#define CONFIG_SYS_FLASH_WORD_SIZE	unsigned short	/* flash word size (width)	*/
+#define CONFIG_SYS_FLASH_ADDR0		0x5555	/* 1st address for flash config cycles	*/
+#define CONFIG_SYS_FLASH_ADDR1		0x2AAA	/* 2nd address for flash config cycles	*/
 /*
  * The following defines are added for buggy IOP480 byte interface.
  * All other boards should use the standard values (CPCI405 etc.)
  */
-#define CFG_FLASH_READ0		0x0000	/* 0 is standard			*/
-#define CFG_FLASH_READ1		0x0001	/* 1 is standard			*/
-#define CFG_FLASH_READ2		0x0002	/* 2 is standard			*/
+#define CONFIG_SYS_FLASH_READ0		0x0000	/* 0 is standard			*/
+#define CONFIG_SYS_FLASH_READ1		0x0001	/* 1 is standard			*/
+#define CONFIG_SYS_FLASH_READ2		0x0002	/* 2 is standard			*/
 
-#define CFG_FLASH_EMPTY_INFO		/* print 'E' for empty sector on flinfo */
+#define CONFIG_SYS_FLASH_EMPTY_INFO		/* print 'E' for empty sector on flinfo */
 
 /*-----------------------------------------------------------------------
  * Environment Variable setup
  */
 #ifdef ENVIRONMENT_IN_EEPROM
 
-#define CFG_ENV_IS_IN_EEPROM	1	/* use EEPROM for environment vars */
-#define CFG_ENV_OFFSET		0x100	/* environment starts at the beginning of the EEPROM */
-#define CFG_ENV_SIZE		0x700	/* 2048-256 bytes may be used for env vars (total size of a CAT24WC16 is 2048 bytes)*/
+#define CONFIG_ENV_IS_IN_EEPROM	1	/* use EEPROM for environment vars */
+#define CONFIG_ENV_OFFSET		0x100	/* environment starts at the beginning of the EEPROM */
+#define CONFIG_ENV_SIZE		0x700	/* 2048-256 bytes may be used for env vars (total size of a CAT24WC16 is 2048 bytes)*/
 
 #else	/* DEFAULT: environment in flash, using redundand flash sectors */
 
-#define CFG_ENV_IS_IN_FLASH	1	/* use FLASH for environment vars */
-#define CFG_ENV_ADDR		0xFFFF8000	/* environment starts at the first small sector */
-#define CFG_ENV_SECT_SIZE	0x2000	/* 8196 bytes may be used for env vars*/
-#define CFG_ENV_ADDR_REDUND	0xFFFFA000
-#define CFG_ENV_SIZE_REDUND	0x2000
+#define CONFIG_ENV_IS_IN_FLASH	1	/* use FLASH for environment vars */
+#define CONFIG_ENV_ADDR		0xFFFF8000	/* environment starts at the first small sector */
+#define CONFIG_ENV_SECT_SIZE	0x2000	/* 8196 bytes may be used for env vars*/
+#define CONFIG_ENV_ADDR_REDUND	0xFFFFA000
+#define CONFIG_ENV_SIZE_REDUND	0x2000
 
-#define	CFG_USE_PPCENV			/* Environment embedded in sect .ppcenv */
+#define	CONFIG_SYS_USE_PPCENV			/* Environment embedded in sect .ppcenv */
 
 #endif	/* ENVIRONMENT_IN_EEPROM */
 
 
-#define CFG_NVRAM_BASE_ADDR	0xF0000500		/* NVRAM base address	*/
-#define CFG_NVRAM_SIZE		242			/* NVRAM size		*/
+#define CONFIG_SYS_NVRAM_BASE_ADDR	0xF0000500		/* NVRAM base address	*/
+#define CONFIG_SYS_NVRAM_SIZE		242			/* NVRAM size		*/
 
 /*-----------------------------------------------------------------------
  * I2C EEPROM (CAT24WC16) for environment
  */
 #define CONFIG_HARD_I2C			/* I2c with hardware support */
-#define CFG_I2C_SPEED		400000	/* I2C speed and slave address */
-#define CFG_I2C_SLAVE		0x7F
+#define CONFIG_SYS_I2C_SPEED		400000	/* I2C speed and slave address */
+#define CONFIG_SYS_I2C_SLAVE		0x7F
 
-#define CFG_I2C_EEPROM_ADDR	0x50	/* EEPROM CAT28WC08		*/
-#define CFG_I2C_EEPROM_ADDR_LEN 1	/* Bytes of address		*/
+#define CONFIG_SYS_I2C_EEPROM_ADDR	0x50	/* EEPROM CAT28WC08		*/
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1	/* Bytes of address		*/
 /* mask of address bits that overflow into the "EEPROM chip address"	*/
-/*#define CFG_I2C_EEPROM_ADDR_OVERFLOW	0x07*/
-#define CFG_EEPROM_PAGE_WRITE_BITS 4	/* The Catalyst CAT24WC08 has	*/
+/*#define CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW	0x07*/
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 4	/* The Catalyst CAT24WC08 has	*/
 					/* 16 byte page write mode using*/
 					/* last 4 bits of the address	*/
-#define CFG_EEPROM_PAGE_WRITE_DELAY_MS	10   /* and takes up to 10 msec */
-#define CFG_EEPROM_PAGE_WRITE_ENABLE
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	10   /* and takes up to 10 msec */
 
 /*
  * Init Memory Controller:
@@ -467,21 +467,21 @@
  */
 
 /* Memory Bank 0 (Flash Bank 0, NOR-FLASH) initialization			*/
-#define CFG_EBC_PB0AP		0x92015480
-#define CFG_EBC_PB0CR		0xFFC5A000  /* BAS=0xFFC,BS=4MB,BU=R/W,BW=16bit */
+#define CONFIG_SYS_EBC_PB0AP		0x92015480
+#define CONFIG_SYS_EBC_PB0CR		0xFFC5A000  /* BAS=0xFFC,BS=4MB,BU=R/W,BW=16bit */
 
 /* Memory Bank 1 (External SRAM) initialization					*/
 /* Since this must replace NOR Flash, we use the same settings for CS0		*/
-#define CFG_EBC_PB1AP		0x92015480
-#define CFG_EBC_PB1CR		0xFF85A000  /* BAS=0xFF8,BS=4MB,BU=R/W,BW=8bit	*/
+#define CONFIG_SYS_EBC_PB1AP		0x92015480
+#define CONFIG_SYS_EBC_PB1CR		0xFF85A000  /* BAS=0xFF8,BS=4MB,BU=R/W,BW=8bit	*/
 
 /* Memory Bank 2 (Flash Bank 1, NAND-FLASH) initialization			*/
-#define CFG_EBC_PB2AP		0x92015480
-#define CFG_EBC_PB2CR		0xFF458000  /* BAS=0xFF4,BS=4MB,BU=R/W,BW=8bit	*/
+#define CONFIG_SYS_EBC_PB2AP		0x92015480
+#define CONFIG_SYS_EBC_PB2CR		0xFF458000  /* BAS=0xFF4,BS=4MB,BU=R/W,BW=8bit	*/
 
 /* Memory Bank 3 (Flash Bank 2, NAND-FLASH) initialization			*/
-#define CFG_EBC_PB3AP		0x92015480
-#define CFG_EBC_PB3CR		0xFF058000  /* BAS=0xFF0,BS=4MB,BU=R/W,BW=8bit	*/
+#define CONFIG_SYS_EBC_PB3AP		0x92015480
+#define CONFIG_SYS_EBC_PB3CR		0xFF058000  /* BAS=0xFF0,BS=4MB,BU=R/W,BW=8bit	*/
 
 #ifdef CONFIG_PPCHAMELEON_SMI712
 /*
@@ -495,66 +495,66 @@
 #define CONFIG_CONSOLE_EXTRA_INFO
 #define CONFIG_VGA_AS_SINGLE_DEVICE
 /* This is the base address (on 405EP-side) used to generate I/O accesses on PCI bus */
-#define CFG_ISA_IO 0xE8000000
+#define CONFIG_SYS_ISA_IO 0xE8000000
 /* see also drivers/video/videomodes.c */
-#define CFG_DEFAULT_VIDEO_MODE 0x303
+#define CONFIG_SYS_DEFAULT_VIDEO_MODE 0x303
 #endif
 
 /*-----------------------------------------------------------------------
  * FPGA stuff
  */
 /* FPGA internal regs */
-#define CFG_FPGA_MODE		0x00
-#define CFG_FPGA_STATUS		0x02
-#define CFG_FPGA_TS		0x04
-#define CFG_FPGA_TS_LOW		0x06
-#define CFG_FPGA_TS_CAP0	0x10
-#define CFG_FPGA_TS_CAP0_LOW	0x12
-#define CFG_FPGA_TS_CAP1	0x14
-#define CFG_FPGA_TS_CAP1_LOW	0x16
-#define CFG_FPGA_TS_CAP2	0x18
-#define CFG_FPGA_TS_CAP2_LOW	0x1a
-#define CFG_FPGA_TS_CAP3	0x1c
-#define CFG_FPGA_TS_CAP3_LOW	0x1e
+#define CONFIG_SYS_FPGA_MODE		0x00
+#define CONFIG_SYS_FPGA_STATUS		0x02
+#define CONFIG_SYS_FPGA_TS		0x04
+#define CONFIG_SYS_FPGA_TS_LOW		0x06
+#define CONFIG_SYS_FPGA_TS_CAP0	0x10
+#define CONFIG_SYS_FPGA_TS_CAP0_LOW	0x12
+#define CONFIG_SYS_FPGA_TS_CAP1	0x14
+#define CONFIG_SYS_FPGA_TS_CAP1_LOW	0x16
+#define CONFIG_SYS_FPGA_TS_CAP2	0x18
+#define CONFIG_SYS_FPGA_TS_CAP2_LOW	0x1a
+#define CONFIG_SYS_FPGA_TS_CAP3	0x1c
+#define CONFIG_SYS_FPGA_TS_CAP3_LOW	0x1e
 
 /* FPGA Mode Reg */
-#define CFG_FPGA_MODE_CF_RESET	0x0001
-#define CFG_FPGA_MODE_TS_IRQ_ENABLE 0x0100
-#define CFG_FPGA_MODE_TS_IRQ_CLEAR  0x1000
-#define CFG_FPGA_MODE_TS_CLEAR	0x2000
+#define CONFIG_SYS_FPGA_MODE_CF_RESET	0x0001
+#define CONFIG_SYS_FPGA_MODE_TS_IRQ_ENABLE 0x0100
+#define CONFIG_SYS_FPGA_MODE_TS_IRQ_CLEAR  0x1000
+#define CONFIG_SYS_FPGA_MODE_TS_CLEAR	0x2000
 
 /* FPGA Status Reg */
-#define CFG_FPGA_STATUS_DIP0	0x0001
-#define CFG_FPGA_STATUS_DIP1	0x0002
-#define CFG_FPGA_STATUS_DIP2	0x0004
-#define CFG_FPGA_STATUS_FLASH	0x0008
-#define CFG_FPGA_STATUS_TS_IRQ	0x1000
+#define CONFIG_SYS_FPGA_STATUS_DIP0	0x0001
+#define CONFIG_SYS_FPGA_STATUS_DIP1	0x0002
+#define CONFIG_SYS_FPGA_STATUS_DIP2	0x0004
+#define CONFIG_SYS_FPGA_STATUS_FLASH	0x0008
+#define CONFIG_SYS_FPGA_STATUS_TS_IRQ	0x1000
 
-#define CFG_FPGA_SPARTAN2	1		/* using Xilinx Spartan 2 now	 */
-#define CFG_FPGA_MAX_SIZE	128*1024	/* 128kByte is enough for XC2S50E*/
+#define CONFIG_SYS_FPGA_SPARTAN2	1		/* using Xilinx Spartan 2 now	 */
+#define CONFIG_SYS_FPGA_MAX_SIZE	128*1024	/* 128kByte is enough for XC2S50E*/
 
 /* FPGA program pin configuration */
-#define CFG_FPGA_PRG		0x04000000	/* FPGA program pin (ppc output) */
-#define CFG_FPGA_CLK		0x02000000	/* FPGA clk pin (ppc output)	 */
-#define CFG_FPGA_DATA		0x01000000	/* FPGA data pin (ppc output)	 */
-#define CFG_FPGA_INIT		0x00010000	/* FPGA init pin (ppc input)	 */
-#define CFG_FPGA_DONE		0x00008000	/* FPGA done pin (ppc input)	 */
+#define CONFIG_SYS_FPGA_PRG		0x04000000	/* FPGA program pin (ppc output) */
+#define CONFIG_SYS_FPGA_CLK		0x02000000	/* FPGA clk pin (ppc output)	 */
+#define CONFIG_SYS_FPGA_DATA		0x01000000	/* FPGA data pin (ppc output)	 */
+#define CONFIG_SYS_FPGA_INIT		0x00010000	/* FPGA init pin (ppc input)	 */
+#define CONFIG_SYS_FPGA_DONE		0x00008000	/* FPGA done pin (ppc input)	 */
 
 /*-----------------------------------------------------------------------
  * Definitions for initial stack pointer and data area (in data cache)
  */
 /* use on chip memory ( OCM ) for temperary stack until sdram is tested */
-#define CFG_TEMP_STACK_OCM	1
+#define CONFIG_SYS_TEMP_STACK_OCM	1
 
 /* On Chip Memory location */
-#define CFG_OCM_DATA_ADDR	0xF8000000
-#define CFG_OCM_DATA_SIZE	0x1000
-#define CFG_INIT_RAM_ADDR	CFG_OCM_DATA_ADDR /* inside of SDRAM		*/
-#define CFG_INIT_RAM_END	CFG_OCM_DATA_SIZE /* End of used area in RAM	*/
+#define CONFIG_SYS_OCM_DATA_ADDR	0xF8000000
+#define CONFIG_SYS_OCM_DATA_SIZE	0x1000
+#define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_OCM_DATA_ADDR /* inside of SDRAM		*/
+#define CONFIG_SYS_INIT_RAM_END	CONFIG_SYS_OCM_DATA_SIZE /* End of used area in RAM	*/
 
-#define CFG_GBL_DATA_SIZE      128  /* size in bytes reserved for initial data */
-#define CFG_GBL_DATA_OFFSET    (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_GBL_DATA_SIZE      128  /* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET    (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
 /*-----------------------------------------------------------------------
  * Definitions for GPIO setup (PPC405EP specific)
@@ -569,14 +569,14 @@
  * GPIO0[30]	- EMAC0 input
  * GPIO0[31]	- EMAC1 reject packet as output
  */
-#define CFG_GPIO0_OSRH		0x40000550
-#define CFG_GPIO0_OSRL		0x00000110
-#define CFG_GPIO0_ISR1H		0x00000000
-/*#define CFG_GPIO0_ISR1L	0x15555445*/
-#define CFG_GPIO0_ISR1L		0x15555444
-#define CFG_GPIO0_TSRH		0x00000000
-#define CFG_GPIO0_TSRL		0x00000000
-#define CFG_GPIO0_TCR		0xF7FF8014
+#define CONFIG_SYS_GPIO0_OSRH		0x40000550
+#define CONFIG_SYS_GPIO0_OSRL		0x00000110
+#define CONFIG_SYS_GPIO0_ISR1H		0x00000000
+/*#define CONFIG_SYS_GPIO0_ISR1L	0x15555445*/
+#define CONFIG_SYS_GPIO0_ISR1L		0x15555444
+#define CONFIG_SYS_GPIO0_TSRH		0x00000000
+#define CONFIG_SYS_GPIO0_TSRL		0x00000000
+#define CONFIG_SYS_GPIO0_TCR		0xF7FF8014
 
 /*
  * Internal Definitions
@@ -784,17 +784,17 @@
 /* Model HI */
 #define PLLMR0_DEFAULT	PPCHAMELEON_PLLMR0_333_111_37_55_55
 #define PLLMR1_DEFAULT	PPCHAMELEON_PLLMR1_333_111_37_55_55
-#define CFG_OPB_FREQ	55555555
+#define CONFIG_SYS_OPB_FREQ	55555555
 /* Model ME */
 #elif (CONFIG_PPCHAMELEON_MODULE_MODEL == CONFIG_PPCHAMELEON_MODULE_ME)
 #define PLLMR0_DEFAULT	PPCHAMELEON_PLLMR0_266_133_33_66_33
 #define PLLMR1_DEFAULT	PPCHAMELEON_PLLMR1_266_133_33_66_33
-#define CFG_OPB_FREQ	66666666
+#define CONFIG_SYS_OPB_FREQ	66666666
 #else
 /* Model BA (default) */
 #define PLLMR0_DEFAULT	PPCHAMELEON_PLLMR0_133_133_33_66_33
 #define PLLMR1_DEFAULT	PPCHAMELEON_PLLMR1_133_133_33_66_33
-#define CFG_OPB_FREQ	66666666
+#define CONFIG_SYS_OPB_FREQ	66666666
 #endif
 
 #endif /* CONFIG_NO_SERIAL_EEPROM */
diff --git a/include/configs/QS823.h b/include/configs/QS823.h
index cef9f42df..4ac31b1c0 100644
--- a/include/configs/QS823.h
+++ b/include/configs/QS823.h
@@ -35,14 +35,14 @@
 #define __CONFIG_H
 
 /* various debug settings */
-#undef CFG_DEVICE_NULLDEV		/* null device */
+#undef CONFIG_SYS_DEVICE_NULLDEV		/* null device */
 #undef CONFIG_SILENT_CONSOLE		/* silent console */
-#undef CFG_CONSOLE_INFO_QUIET		/* silent console ? */
+#undef CONFIG_SYS_CONSOLE_INFO_QUIET		/* silent console ? */
 #undef DEBUG_FLASH			/* debug flash code */
 #undef FLASH_DEBUG			/* debug fash code */
 #undef DEBUG_ENV			/* debug environment code */
 
-#define CFG_DIRECT_FLASH_TFTP	1	/* allow direct tftp to flash */
+#define CONFIG_SYS_DIRECT_FLASH_TFTP	1	/* allow direct tftp to flash */
 #define CONFIG_ENV_OVERWRITE	1	/* allow overwrite MAC address */
 
 /*
@@ -183,7 +183,7 @@
 #endif /* CONFIG_FLASH_8MB */
 
 #define CONFIG_LOADS_ECHO	1	/* echo on for serial download */
-#undef CFG_LOADS_BAUD_CHANGE		/* don't allow baudrate change */
+#undef CONFIG_SYS_LOADS_BAUD_CHANGE		/* don't allow baudrate change */
 #undef CONFIG_WATCHDOG			/* watchdog disabled */
 #undef CONFIG_STATUS_LED		/* Status LED disabled */
 #undef CONFIG_CAN_DRIVER		/* CAN Driver support disabled */
@@ -223,37 +223,37 @@
 /*-----------------------------------------------------------------------
  * Environment variable storage is in FLASH, one sector before U-boot
  */
-#define CFG_ENV_IS_IN_FLASH	1
-#define CFG_ENV_SECT_SIZE	0x20000		/* 128Kb, one whole sector */
-#define CFG_ENV_SIZE		0x2000		/* 8kb */
-#define CFG_ENV_ADDR		0xffee0000	/* address of env sector */
+#define CONFIG_ENV_IS_IN_FLASH	1
+#define CONFIG_ENV_SECT_SIZE	0x20000		/* 128Kb, one whole sector */
+#define CONFIG_ENV_SIZE		0x2000		/* 8kb */
+#define CONFIG_ENV_ADDR		0xffee0000	/* address of env sector */
 
 /*-----------------------------------------------------------------------
  * Miscellaneous configurable options
  */
-#define CFG_LONGHELP				/* undef to save memory */
-#define CFG_PROMPT		"=> "		/* Monitor Command Prompt */
+#define CONFIG_SYS_LONGHELP				/* undef to save memory */
+#define CONFIG_SYS_PROMPT		"=> "		/* Monitor Command Prompt */
 
-#define CFG_HUSH_PARSER		1		/* use "hush" command parser */
-#define CFG_PROMPT_HUSH_PS2	"> "
+#define CONFIG_SYS_HUSH_PARSER		1		/* use "hush" command parser */
+#define CONFIG_SYS_PROMPT_HUSH_PS2	"> "
 
 #if defined(CONFIG_CMD_KGDB)
-#define CFG_CBSIZE		1024		/* Console I/O Buffer Size */
+#define CONFIG_SYS_CBSIZE		1024		/* Console I/O Buffer Size */
 #else
-#define CFG_CBSIZE		256		/* Console I/O Buffer Size */
+#define CONFIG_SYS_CBSIZE		256		/* Console I/O Buffer Size */
 #endif
-#define CFG_PBSIZE		(CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define CFG_MAXARGS		16		/* max number of command args */
-#define CFG_BARGSIZE		CFG_CBSIZE	/* Boot Argument Buffer Size */
+#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS		16		/* max number of command args */
+#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size */
 
-#define CFG_MEMTEST_START	0x0400000	/* memtest works */
-#define CFG_MEMTEST_END		0x0C00000	/* 4 ... 12 MB in DRAM */
+#define CONFIG_SYS_MEMTEST_START	0x0400000	/* memtest works */
+#define CONFIG_SYS_MEMTEST_END		0x0C00000	/* 4 ... 12 MB in DRAM */
 
-#define CFG_LOAD_ADDR		0x400000	/* default load address */
+#define CONFIG_SYS_LOAD_ADDR		0x400000	/* default load address */
 
-#define CFG_HZ			1000		/* decrementer freq: 1 ms ticks */
+#define CONFIG_SYS_HZ			1000		/* decrementer freq: 1 ms ticks */
 
-#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
 
 /*-----------------------------------------------------------------------
  * Low Level Configuration Settings
@@ -264,56 +264,56 @@
 /*-----------------------------------------------------------------------
  * Internal Memory Mapped Register
  */
-#define CFG_IMMR		0xFF000000
+#define CONFIG_SYS_IMMR		0xFF000000
 
 /*-----------------------------------------------------------------------
  * Definitions for initial stack pointer and data area (in DPRAM)
  */
-#define CFG_INIT_RAM_ADDR	CFG_IMMR
-#define CFG_INIT_RAM_END	0x2F00		/* End of used area in DPRAM */
-#define CFG_GBL_DATA_SIZE	64		/* size in bytes reserved for initial data */
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_IMMR
+#define CONFIG_SYS_INIT_RAM_END	0x2F00		/* End of used area in DPRAM */
+#define CONFIG_SYS_GBL_DATA_SIZE	64		/* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
 /*-----------------------------------------------------------------------
  * Start addresses for the final memory configuration
  * (Set up by the startup code)
- * Please note that CFG_SDRAM_BASE _must_ start at 0
+ * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
  */
-#define CFG_SDRAM_BASE		0x00000000
-#define CFG_FLASH_BASE		0xFF800000	/* Allow an 8Mbyte window */
+#define CONFIG_SYS_SDRAM_BASE		0x00000000
+#define CONFIG_SYS_FLASH_BASE		0xFF800000	/* Allow an 8Mbyte window */
 
 #define FLASH_BASE0_4M_PRELIM	0xFFC00000	/* Base for 4M Flash */
 #define FLASH_BASE0_8M_PRELIM	0xFF800000	/* Base for 8M Flash */
 
-#define CFG_MONITOR_LEN		(192 << 10)	/* Reserve 192 kB for Monitor */
-#define CFG_MONITOR_BASE	0xFFF00000	/* U-boot location */
-#define CFG_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc() */
+#define CONFIG_SYS_MONITOR_LEN		(192 << 10)	/* Reserve 192 kB for Monitor */
+#define CONFIG_SYS_MONITOR_BASE	0xFFF00000	/* U-boot location */
+#define CONFIG_SYS_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc() */
 
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
+#define CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
 
 /*-----------------------------------------------------------------------
  * TODO flash parameters
  * FLASH organization for Intel Strataflash
  */
-#undef  CFG_FLASH_16BIT				/* 32-bit wide flash memory */
-#define CFG_MAX_FLASH_BANKS	1		/* max number of memory banks */
-#define CFG_MAX_FLASH_SECT	71		/* max number of sectors on one chip */
+#undef  CONFIG_SYS_FLASH_16BIT				/* 32-bit wide flash memory */
+#define CONFIG_SYS_MAX_FLASH_BANKS	1		/* max number of memory banks */
+#define CONFIG_SYS_MAX_FLASH_SECT	71		/* max number of sectors on one chip */
 
-#define CFG_FLASH_ERASE_TOUT	120000		/* Timeout for Flash Erase (in ms) */
-#define CFG_FLASH_WRITE_TOUT	500		/* Timeout for Flash Write (in ms) */
+#define CONFIG_SYS_FLASH_ERASE_TOUT	120000		/* Timeout for Flash Erase (in ms) */
+#define CONFIG_SYS_FLASH_WRITE_TOUT	500		/* Timeout for Flash Write (in ms) */
 
 /*-----------------------------------------------------------------------
  * Cache Configuration
  */
-#define CFG_CACHELINE_SIZE	16		/* For all MPC8xx CPUs */
+#define CONFIG_SYS_CACHELINE_SIZE	16		/* For all MPC8xx CPUs */
 #if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT	4		/* log base 2 of the above value */
+#define CONFIG_SYS_CACHELINE_SHIFT	4		/* log base 2 of the above value */
 #endif
 
 /*-----------------------------------------------------------------------
@@ -324,34 +324,34 @@
  */
 
 #ifdef CONFIG_WATCHDOG
-#define CFG_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWE | SYPCR_SWRI | SYPCR_SWP)
+#define CONFIG_SYS_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWE | SYPCR_SWRI | SYPCR_SWP)
 #else
-#define CFG_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWRI | SYPCR_SWP)
+#define CONFIG_SYS_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWRI | SYPCR_SWP)
 #endif
 
 /*-----------------------------------------------------------------------
  * SIUMCR - SIU Module Configuration 11-6
  *-----------------------------------------------------------------------
  */
-#define CFG_SIUMCR	(SIUMCR_DLK | SIUMCR_DPC | SIUMCR_MPRE | SIUMCR_MLRC01 | SIUMCR_GB5E)
+#define CONFIG_SYS_SIUMCR	(SIUMCR_DLK | SIUMCR_DPC | SIUMCR_MPRE | SIUMCR_MLRC01 | SIUMCR_GB5E)
 
 /*-----------------------------------------------------------------------
  * TBSCR - Time Base Status and Control 11-26
  *-----------------------------------------------------------------------
  */
-#define CFG_TBSCR	(TBSCR_REFA | TBSCR_REFB | TBSCR_TBF)
+#define CONFIG_SYS_TBSCR	(TBSCR_REFA | TBSCR_REFB | TBSCR_TBF)
 
 /*-----------------------------------------------------------------------
  * RTCSC - Real-Time Clock Status and Control Register 11-27
  *-----------------------------------------------------------------------
  */
-#define CFG_RTCSC	(RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE)
+#define CONFIG_SYS_RTCSC	(RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE)
 
 /*-----------------------------------------------------------------------
  * PISCR - Periodic Interrupt Status and Control 11-31
  *-----------------------------------------------------------------------
  */
-#define CFG_PISCR	(PISCR_PS | PISCR_PITF)
+#define CONFIG_SYS_PISCR	(PISCR_PS | PISCR_PITF)
 
 /*-----------------------------------------------------------------------
  * PLPRCR - PLL, Low-Power, and Reset Control Register 15-30
@@ -361,36 +361,36 @@
 /* MF (Multiplication Factor of SPLL) */
 /* Sets the QS823 to specified clock from 32KHz clock at EXTAL. */
 #define vPLPRCR_MF	((CONFIG_CLOCK_MULT+1) << 20)
-#define CFG_PLPRCR	(vPLPRCR_MF | PLPRCR_SPLSS | PLPRCR_TEXPS | PLPRCR_TMIST | PLPRCR_LOLRE)
+#define CONFIG_SYS_PLPRCR	(vPLPRCR_MF | PLPRCR_SPLSS | PLPRCR_TEXPS | PLPRCR_TMIST | PLPRCR_LOLRE)
 
 /*-----------------------------------------------------------------------
  * SCCR - System Clock and reset Control Register		15-27
  *-----------------------------------------------------------------------
  */
 #if defined(CONFIG_CLOCK_16MHZ) || defined(CONFIG_CLOCK_33MHZ) || defined(CONFIG_CLOCK_50MHZ)
-#define CFG_SCCR		(SCCR_TBS | SCCR_EBDF00 | SCCR_DFBRG00)
-#define CFG_BRGCLK_PRESCALE	1
+#define CONFIG_SYS_SCCR		(SCCR_TBS | SCCR_EBDF00 | SCCR_DFBRG00)
+#define CONFIG_SYS_BRGCLK_PRESCALE	1
 #endif
 
 #if defined(CONFIG_CLOCK_66MHZ)
-#define CFG_SCCR		(SCCR_TBS | SCCR_EBDF00 | SCCR_DFBRG01)
-#define CFG_BRGCLK_PRESCALE	4
+#define CONFIG_SYS_SCCR		(SCCR_TBS | SCCR_EBDF00 | SCCR_DFBRG01)
+#define CONFIG_SYS_BRGCLK_PRESCALE	4
 #endif
 
 #if defined(CONFIG_CLOCK_80MHZ)
-#define CFG_SCCR		(SCCR_TBS | SCCR_EBDF01 | SCCR_DFBRG01)
-#define CFG_BRGCLK_PRESCALE	4
+#define CONFIG_SYS_SCCR		(SCCR_TBS | SCCR_EBDF01 | SCCR_DFBRG01)
+#define CONFIG_SYS_BRGCLK_PRESCALE	4
 #endif
 
-#define SCCR_MASK		CFG_SCCR
+#define SCCR_MASK		CONFIG_SYS_SCCR
 
 /*-----------------------------------------------------------------------
  * Debug Enable Register
  * 0x73E67C0F - All interrupts handled by BDM
  * 0x00824001 - Only interrupts needed by MWDebug.exe handled by BDM
  *-----------------------------------------------------------------------
-#define CFG_DER			0x73E67C0F
-#define CFG_DER			0x0082400F
+#define CONFIG_SYS_DER			0x73E67C0F
+#define CONFIG_SYS_DER			0x0082400F
 
  #-------------------------------------------------------------------------
  # Program the Debug Enable Register (DER). This register provides the user
@@ -400,7 +400,7 @@
  # MPC860 User Manual for a description of this register.
  #-------------------------------------------------------------------------
 */
-#define CFG_DER			0
+#define CONFIG_SYS_DER			0
 
 /*-----------------------------------------------------------------------
  * Memory Controller Initialization Constants
@@ -411,8 +411,8 @@
  * BR0 and OR0 (AMD dual FLASH devices)
  * Base address = 0xFFF0_0000 - 0xFFF7_FFFF (After relocation)
  */
-#define CFG_PRELIM_OR_AM
-#define CFG_OR_TIMING_FLASH
+#define CONFIG_SYS_PRELIM_OR_AM
+#define CONFIG_SYS_OR_TIMING_FLASH
 
 /*
  *-----------------------------------------------------------------------
@@ -424,7 +424,7 @@
 /* BA (Base Address) = 0xFF80+0b for a total of 17 bits. 17 bit base addr */
 /*                     represents a minumum 32K block size. */
 #define vBR0_BA			((0xFF80 << 16) + (0 << 15))
-#define CFG_BR0_PRELIM		(vBR0_BA | BR_V)
+#define CONFIG_SYS_BR0_PRELIM		(vBR0_BA | BR_V)
 
 /* AM (Address Mask) = 0xFF80+0b = We've masked the upper 9 bits        */
 /*                                 which defines a 8 Mbyte memory block. */
@@ -432,18 +432,18 @@
 
 #if defined(CONFIG_CLOCK_50MHZ) || defined(CONFIG_CLOCK_80MHZ)
 /*  0101 = Add a 5 clock cycle wait state */
-#define CFG_OR0_PRELIM		(vOR0_AM | OR_CSNT_SAM | 0R_ACS_DIV4 | OR_BI | OR_SCY_5_CLK)
+#define CONFIG_SYS_OR0_PRELIM		(vOR0_AM | OR_CSNT_SAM | 0R_ACS_DIV4 | OR_BI | OR_SCY_5_CLK)
 #endif
 
 #if defined(CONFIG_CLOCK_33MHZ) || defined(CONFIG_CLOCK_66MHZ)
 /*  0011 = Add a 3 clock cycle wait state */
 /*  29.8ns clock * (3 + 2) = 149ns cycle time */
-#define CFG_OR0_PRELIM		(vOR0_AM | OR_CSNT_SAM | OR_ACS_DIV4 | OR_BI | OR_SCY_3_CLK)
+#define CONFIG_SYS_OR0_PRELIM		(vOR0_AM | OR_CSNT_SAM | OR_ACS_DIV4 | OR_BI | OR_SCY_3_CLK)
 #endif
 
 #if defined(CONFIG_CLOCK_16MHZ)
 /*  0010 = Add a 2 clock cycle wait state */
-#define CFG_OR0_PRELIM		(vOR0_AM | OR_CSNT_SAM | OR_ACS_DIV4 | OR_BI | OR_SCY_2_CLK)
+#define CONFIG_SYS_OR0_PRELIM		(vOR0_AM | OR_CSNT_SAM | OR_ACS_DIV4 | OR_BI | OR_SCY_2_CLK)
 #endif
 
 /*
@@ -463,8 +463,8 @@
  */
 #define vOR1_AM			((0xF800 << 16) + (0 << 15))
 #define vBR1_BA			((0x0000 << 16) + (0 << 15))
-#define CFG_OR1			(vOR1_AM | OR_CSNT_SAM | OR_BI)
-#define CFG_BR1			(vBR1_BA | BR_MS_UPMA | BR_V)
+#define CONFIG_SYS_OR1			(vOR1_AM | OR_CSNT_SAM | OR_BI)
+#define CONFIG_SYS_BR1			(vBR1_BA | BR_MS_UPMA | BR_V)
 
 /* Machine A Mode Register */
 
@@ -492,12 +492,12 @@
 
 /* For boards with 16M of SDRAM */
 #define SDRAM_16M_MAX_SIZE	0x01000000	/* max 16MB SDRAM */
-#define CFG_16M_MAMR		(vMAMR_PTA | MAMR_AMA_TYPE_0 | MAMR_DSA_2_CYCL | MAMR_G0CLA_A11 |\
+#define CONFIG_SYS_16M_MAMR		(vMAMR_PTA | MAMR_AMA_TYPE_0 | MAMR_DSA_2_CYCL | MAMR_G0CLA_A11 |\
 MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X)
 
 /* For boards with 32M of SDRAM */
 #define SDRAM_32M_MAX_SIZE	0x02000000	/* max 32MB SDRAM */
-#define CFG_32M_MAMR		(vMAMR_PTA | MAMR_AMA_TYPE_1 | MAMR_DSA_2_CYCL | MAMR_G0CLA_A10 |\
+#define CONFIG_SYS_32M_MAMR		(vMAMR_PTA | MAMR_AMA_TYPE_1 | MAMR_DSA_2_CYCL | MAMR_G0CLA_A10 |\
 MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X)
 
 
@@ -505,12 +505,12 @@ MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X)
 
 #if defined(CONFIG_CLOCK_66MHZ) || defined(CONFIG_CLOCK_80MHZ)
 /* Divide by 32 */
-#define CFG_MPTPR		0x02
+#define CONFIG_SYS_MPTPR		0x02
 #endif
 
 #if defined(CONFIG_CLOCK_16MHZ) || defined(CONFIG_CLOCK_33MHZ) || defined(CONFIG_CLOCK_50MHZ)
 /* Divide by 16 */
-#define CFG_MPTPR		0x04
+#define CONFIG_SYS_MPTPR		0x04
 #endif
 
 /*
@@ -518,24 +518,24 @@ MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X)
  * Base address = 0xF020_0000 - 0xF020_0FFF
  *
  */
-#define CFG_OR2_PRELIM		0xFFF00000
-#define CFG_BR2_PRELIM		0xF0200000
+#define CONFIG_SYS_OR2_PRELIM		0xFFF00000
+#define CONFIG_SYS_BR2_PRELIM		0xF0200000
 
 /*
  * BR3 and OR3 (External Bus CS3)
  * Base address = 0xF030_0000 - 0xF030_0FFF
  *
  */
-#define CFG_OR3_PRELIM		0xFFF00000
-#define CFG_BR3_PRELIM		0xF0300000
+#define CONFIG_SYS_OR3_PRELIM		0xFFF00000
+#define CONFIG_SYS_BR3_PRELIM		0xF0300000
 
 /*
  * BR4 and OR4 (External Bus CS3)
  * Base address = 0xF040_0000 - 0xF040_0FFF
  *
  */
-#define CFG_OR4_PRELIM		0xFFF00000
-#define CFG_BR4_PRELIM		0xF0400000
+#define CONFIG_SYS_OR4_PRELIM		0xFFF00000
+#define CONFIG_SYS_BR4_PRELIM		0xF0400000
 
 
 /*
@@ -543,24 +543,24 @@ MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X)
  * Base address = 0xF050_0000 - 0xF050_0FFF
  *
  */
-#define CFG_OR5_PRELIM		0xFFF00000
-#define CFG_BR5_PRELIM		0xF0500000
+#define CONFIG_SYS_OR5_PRELIM		0xFFF00000
+#define CONFIG_SYS_BR5_PRELIM		0xF0500000
 
 /*
  * BR6 and OR6 (Unused)
  * Base address = 0xF060_0000 - 0xF060_0FFF
  *
  */
-#define CFG_OR6_PRELIM		0xFFF00000
-#define CFG_BR6_PRELIM		0xF0600000
+#define CONFIG_SYS_OR6_PRELIM		0xFFF00000
+#define CONFIG_SYS_BR6_PRELIM		0xF0600000
 
 /*
  * BR7 and OR7 (Unused)
  * Base address = 0xF070_0000 - 0xF070_0FFF
  *
  */
-#define CFG_OR7_PRELIM		0xFFF00000
-#define CFG_BR7_PRELIM		0xF0700000
+#define CONFIG_SYS_OR7_PRELIM		0xFFF00000
+#define CONFIG_SYS_BR7_PRELIM		0xF0700000
 
 /*
  * Internal Definitions
diff --git a/include/configs/QS850.h b/include/configs/QS850.h
index ba5827a22..65f41e6a7 100644
--- a/include/configs/QS850.h
+++ b/include/configs/QS850.h
@@ -35,14 +35,14 @@
 #define __CONFIG_H
 
 /* various debug settings */
-#undef CFG_DEVICE_NULLDEV		/* null device */
+#undef CONFIG_SYS_DEVICE_NULLDEV		/* null device */
 #undef CONFIG_SILENT_CONSOLE		/* silent console */
-#undef CFG_CONSOLE_INFO_QUIET		/* silent console ? */
+#undef CONFIG_SYS_CONSOLE_INFO_QUIET		/* silent console ? */
 #undef DEBUG_FLASH			/* debug flash code */
 #undef FLASH_DEBUG			/* debug fash code */
 #undef DEBUG_ENV			/* debug environment code */
 
-#define CFG_DIRECT_FLASH_TFTP	1	/* allow direct tftp to flash */
+#define CONFIG_SYS_DIRECT_FLASH_TFTP	1	/* allow direct tftp to flash */
 #define CONFIG_ENV_OVERWRITE	1	/* allow overwrite MAC address */
 
 /*
@@ -183,7 +183,7 @@
 #endif /* CONFIG_FLASH_8MB */
 
 #define CONFIG_LOADS_ECHO	1	/* echo on for serial download */
-#undef CFG_LOADS_BAUD_CHANGE		/* don't allow baudrate change */
+#undef CONFIG_SYS_LOADS_BAUD_CHANGE		/* don't allow baudrate change */
 #undef CONFIG_WATCHDOG			/* watchdog disabled */
 #undef CONFIG_STATUS_LED		/* Status LED disabled */
 #undef CONFIG_CAN_DRIVER		/* CAN Driver support disabled */
@@ -223,37 +223,37 @@
 /*-----------------------------------------------------------------------
  * Environment variable storage is in FLASH, one sector before U-boot
  */
-#define CFG_ENV_IS_IN_FLASH	1
-#define CFG_ENV_SECT_SIZE	0x20000		/* 128Kb, one whole sector */
-#define CFG_ENV_SIZE		0x2000		/* 8kb */
-#define CFG_ENV_ADDR		0xffee0000	/* address of env sector */
+#define CONFIG_ENV_IS_IN_FLASH	1
+#define CONFIG_ENV_SECT_SIZE	0x20000		/* 128Kb, one whole sector */
+#define CONFIG_ENV_SIZE		0x2000		/* 8kb */
+#define CONFIG_ENV_ADDR		0xffee0000	/* address of env sector */
 
 /*-----------------------------------------------------------------------
  * Miscellaneous configurable options
  */
-#define CFG_LONGHELP				/* undef to save memory */
-#define CFG_PROMPT		"=> "		/* Monitor Command Prompt */
+#define CONFIG_SYS_LONGHELP				/* undef to save memory */
+#define CONFIG_SYS_PROMPT		"=> "		/* Monitor Command Prompt */
 
-#define CFG_HUSH_PARSER		1		/* use "hush" command parser */
-#define CFG_PROMPT_HUSH_PS2	"> "
+#define CONFIG_SYS_HUSH_PARSER		1		/* use "hush" command parser */
+#define CONFIG_SYS_PROMPT_HUSH_PS2	"> "
 
 #if defined(CONFIG_CMD_KGDB)
-#define CFG_CBSIZE		1024		/* Console I/O Buffer Size */
+#define CONFIG_SYS_CBSIZE		1024		/* Console I/O Buffer Size */
 #else
-#define CFG_CBSIZE		256		/* Console I/O Buffer Size */
+#define CONFIG_SYS_CBSIZE		256		/* Console I/O Buffer Size */
 #endif
-#define CFG_PBSIZE		(CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define CFG_MAXARGS		16		/* max number of command args */
-#define CFG_BARGSIZE		CFG_CBSIZE	/* Boot Argument Buffer Size */
+#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS		16		/* max number of command args */
+#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size */
 
-#define CFG_MEMTEST_START	0x0400000	/* memtest works */
-#define CFG_MEMTEST_END		0x0C00000	/* 4 ... 12 MB in DRAM */
+#define CONFIG_SYS_MEMTEST_START	0x0400000	/* memtest works */
+#define CONFIG_SYS_MEMTEST_END		0x0C00000	/* 4 ... 12 MB in DRAM */
 
-#define CFG_LOAD_ADDR		0x400000	/* default load address */
+#define CONFIG_SYS_LOAD_ADDR		0x400000	/* default load address */
 
-#define CFG_HZ			1000		/* decrementer freq: 1 ms ticks */
+#define CONFIG_SYS_HZ			1000		/* decrementer freq: 1 ms ticks */
 
-#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
 
 /*-----------------------------------------------------------------------
  * Low Level Configuration Settings
@@ -264,56 +264,56 @@
 /*-----------------------------------------------------------------------
  * Internal Memory Mapped Register
  */
-#define CFG_IMMR		0xFF000000
+#define CONFIG_SYS_IMMR		0xFF000000
 
 /*-----------------------------------------------------------------------
  * Definitions for initial stack pointer and data area (in DPRAM)
  */
-#define CFG_INIT_RAM_ADDR	CFG_IMMR
-#define CFG_INIT_RAM_END	0x2F00		/* End of used area in DPRAM */
-#define CFG_GBL_DATA_SIZE	64		/* size in bytes reserved for initial data */
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_IMMR
+#define CONFIG_SYS_INIT_RAM_END	0x2F00		/* End of used area in DPRAM */
+#define CONFIG_SYS_GBL_DATA_SIZE	64		/* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
 /*-----------------------------------------------------------------------
  * Start addresses for the final memory configuration
  * (Set up by the startup code)
- * Please note that CFG_SDRAM_BASE _must_ start at 0
+ * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
  */
-#define CFG_SDRAM_BASE		0x00000000
-#define CFG_FLASH_BASE		0xFF800000	/* Allow an 8Mbyte window */
+#define CONFIG_SYS_SDRAM_BASE		0x00000000
+#define CONFIG_SYS_FLASH_BASE		0xFF800000	/* Allow an 8Mbyte window */
 
 #define FLASH_BASE0_4M_PRELIM	0xFFC00000	/* Base for 4M Flash */
 #define FLASH_BASE0_8M_PRELIM	0xFF800000	/* Base for 8M Flash */
 
-#define CFG_MONITOR_LEN		(192 << 10)	/* Reserve 192 kB for Monitor */
-#define CFG_MONITOR_BASE	0xFFF00000	/* U-boot location */
-#define CFG_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc() */
+#define CONFIG_SYS_MONITOR_LEN		(192 << 10)	/* Reserve 192 kB for Monitor */
+#define CONFIG_SYS_MONITOR_BASE	0xFFF00000	/* U-boot location */
+#define CONFIG_SYS_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc() */
 
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
+#define CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
 
 /*-----------------------------------------------------------------------
  * TODO flash parameters
  * FLASH organization for Intel Strataflash
  */
-#undef  CFG_FLASH_16BIT				/* 32-bit wide flash memory */
-#define CFG_MAX_FLASH_BANKS	1		/* max number of memory banks */
-#define CFG_MAX_FLASH_SECT	71		/* max number of sectors on one chip */
+#undef  CONFIG_SYS_FLASH_16BIT				/* 32-bit wide flash memory */
+#define CONFIG_SYS_MAX_FLASH_BANKS	1		/* max number of memory banks */
+#define CONFIG_SYS_MAX_FLASH_SECT	71		/* max number of sectors on one chip */
 
-#define CFG_FLASH_ERASE_TOUT	120000		/* Timeout for Flash Erase (in ms) */
-#define CFG_FLASH_WRITE_TOUT	500		/* Timeout for Flash Write (in ms) */
+#define CONFIG_SYS_FLASH_ERASE_TOUT	120000		/* Timeout for Flash Erase (in ms) */
+#define CONFIG_SYS_FLASH_WRITE_TOUT	500		/* Timeout for Flash Write (in ms) */
 
 /*-----------------------------------------------------------------------
  * Cache Configuration
  */
-#define CFG_CACHELINE_SIZE	16		/* For all MPC8xx CPUs */
+#define CONFIG_SYS_CACHELINE_SIZE	16		/* For all MPC8xx CPUs */
 #if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT	4		/* log base 2 of the above value */
+#define CONFIG_SYS_CACHELINE_SHIFT	4		/* log base 2 of the above value */
 #endif
 
 /*-----------------------------------------------------------------------
@@ -324,34 +324,34 @@
  */
 
 #ifdef CONFIG_WATCHDOG
-#define CFG_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWE | SYPCR_SWRI | SYPCR_SWP)
+#define CONFIG_SYS_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWE | SYPCR_SWRI | SYPCR_SWP)
 #else
-#define CFG_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWRI | SYPCR_SWP)
+#define CONFIG_SYS_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWRI | SYPCR_SWP)
 #endif
 
 /*-----------------------------------------------------------------------
  * SIUMCR - SIU Module Configuration 11-6
  *-----------------------------------------------------------------------
  */
-#define CFG_SIUMCR	(SIUMCR_DLK | SIUMCR_DPC | SIUMCR_MPRE | SIUMCR_MLRC01 | SIUMCR_GB5E)
+#define CONFIG_SYS_SIUMCR	(SIUMCR_DLK | SIUMCR_DPC | SIUMCR_MPRE | SIUMCR_MLRC01 | SIUMCR_GB5E)
 
 /*-----------------------------------------------------------------------
  * TBSCR - Time Base Status and Control 11-26
  *-----------------------------------------------------------------------
  */
-#define CFG_TBSCR	(TBSCR_REFA | TBSCR_REFB | TBSCR_TBF)
+#define CONFIG_SYS_TBSCR	(TBSCR_REFA | TBSCR_REFB | TBSCR_TBF)
 
 /*-----------------------------------------------------------------------
  * RTCSC - Real-Time Clock Status and Control Register 11-27
  *-----------------------------------------------------------------------
  */
-#define CFG_RTCSC	(RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE)
+#define CONFIG_SYS_RTCSC	(RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE)
 
 /*-----------------------------------------------------------------------
  * PISCR - Periodic Interrupt Status and Control 11-31
  *-----------------------------------------------------------------------
  */
-#define CFG_PISCR	(PISCR_PS | PISCR_PITF)
+#define CONFIG_SYS_PISCR	(PISCR_PS | PISCR_PITF)
 
 /*-----------------------------------------------------------------------
  * PLPRCR - PLL, Low-Power, and Reset Control Register 15-30
@@ -361,36 +361,36 @@
 /* MF (Multiplication Factor of SPLL) */
 /* Sets the QS850 to specified clock from 32KHz clock at EXTAL. */
 #define vPLPRCR_MF	((CONFIG_CLOCK_MULT+1) << 20)
-#define CFG_PLPRCR	(vPLPRCR_MF | PLPRCR_SPLSS | PLPRCR_TEXPS | PLPRCR_TMIST | PLPRCR_LOLRE)
+#define CONFIG_SYS_PLPRCR	(vPLPRCR_MF | PLPRCR_SPLSS | PLPRCR_TEXPS | PLPRCR_TMIST | PLPRCR_LOLRE)
 
 /*-----------------------------------------------------------------------
  * SCCR - System Clock and reset Control Register		15-27
  *-----------------------------------------------------------------------
  */
 #if defined(CONFIG_CLOCK_16MHZ) || defined(CONFIG_CLOCK_33MHZ) || defined(CONFIG_CLOCK_50MHZ)
-#define CFG_SCCR		(SCCR_TBS | SCCR_EBDF00 | SCCR_DFBRG00)
-#define CFG_BRGCLK_PRESCALE	1
+#define CONFIG_SYS_SCCR		(SCCR_TBS | SCCR_EBDF00 | SCCR_DFBRG00)
+#define CONFIG_SYS_BRGCLK_PRESCALE	1
 #endif
 
 #if defined(CONFIG_CLOCK_66MHZ)
-#define CFG_SCCR		(SCCR_TBS | SCCR_EBDF00 | SCCR_DFBRG01)
-#define CFG_BRGCLK_PRESCALE	4
+#define CONFIG_SYS_SCCR		(SCCR_TBS | SCCR_EBDF00 | SCCR_DFBRG01)
+#define CONFIG_SYS_BRGCLK_PRESCALE	4
 #endif
 
 #if defined(CONFIG_CLOCK_80MHZ)
-#define CFG_SCCR		(SCCR_TBS | SCCR_EBDF01 | SCCR_DFBRG01)
-#define CFG_BRGCLK_PRESCALE	4
+#define CONFIG_SYS_SCCR		(SCCR_TBS | SCCR_EBDF01 | SCCR_DFBRG01)
+#define CONFIG_SYS_BRGCLK_PRESCALE	4
 #endif
 
-#define SCCR_MASK		CFG_SCCR
+#define SCCR_MASK		CONFIG_SYS_SCCR
 
 /*-----------------------------------------------------------------------
  * Debug Enable Register
  * 0x73E67C0F - All interrupts handled by BDM
  * 0x00824001 - Only interrupts needed by MWDebug.exe handled by BDM
  *-----------------------------------------------------------------------
-#define CFG_DER			0x73E67C0F
-#define CFG_DER			0x0082400F
+#define CONFIG_SYS_DER			0x73E67C0F
+#define CONFIG_SYS_DER			0x0082400F
 
  #-------------------------------------------------------------------------
  # Program the Debug Enable Register (DER). This register provides the user
@@ -400,7 +400,7 @@
  # MPC860 User Manual for a description of this register.
  #-------------------------------------------------------------------------
 */
-#define CFG_DER			0
+#define CONFIG_SYS_DER			0
 
 /*-----------------------------------------------------------------------
  * Memory Controller Initialization Constants
@@ -411,8 +411,8 @@
  * BR0 and OR0 (AMD dual FLASH devices)
  * Base address = 0xFFF0_0000 - 0xFFF7_FFFF (After relocation)
  */
-#define CFG_PRELIM_OR_AM
-#define CFG_OR_TIMING_FLASH
+#define CONFIG_SYS_PRELIM_OR_AM
+#define CONFIG_SYS_OR_TIMING_FLASH
 
 /*
  *-----------------------------------------------------------------------
@@ -424,7 +424,7 @@
 /* BA (Base Address) = 0xFF80+0b for a total of 17 bits. 17 bit base addr */
 /*                     represents a minumum 32K block size. */
 #define vBR0_BA			((0xFF80 << 16) + (0 << 15))
-#define CFG_BR0_PRELIM		(vBR0_BA | BR_V)
+#define CONFIG_SYS_BR0_PRELIM		(vBR0_BA | BR_V)
 
 /* AM (Address Mask) = 0xFF80+0b = We've masked the upper 9 bits        */
 /*                                 which defines a 8 Mbyte memory block. */
@@ -432,18 +432,18 @@
 
 #if defined(CONFIG_CLOCK_50MHZ) || defined(CONFIG_CLOCK_80MHZ)
 /*  0101 = Add a 5 clock cycle wait state */
-#define CFG_OR0_PRELIM		(vOR0_AM | OR_CSNT_SAM | 0R_ACS_DIV4 | OR_BI | OR_SCY_5_CLK)
+#define CONFIG_SYS_OR0_PRELIM		(vOR0_AM | OR_CSNT_SAM | 0R_ACS_DIV4 | OR_BI | OR_SCY_5_CLK)
 #endif
 
 #if defined(CONFIG_CLOCK_33MHZ) || defined(CONFIG_CLOCK_66MHZ)
 /*  0011 = Add a 3 clock cycle wait state */
 /*  29.8ns clock * (3 + 2) = 149ns cycle time */
-#define CFG_OR0_PRELIM		(vOR0_AM | OR_CSNT_SAM | OR_ACS_DIV4 | OR_BI | OR_SCY_3_CLK)
+#define CONFIG_SYS_OR0_PRELIM		(vOR0_AM | OR_CSNT_SAM | OR_ACS_DIV4 | OR_BI | OR_SCY_3_CLK)
 #endif
 
 #if defined(CONFIG_CLOCK_16MHZ)
 /*  0010 = Add a 2 clock cycle wait state */
-#define CFG_OR0_PRELIM		(vOR0_AM | OR_CSNT_SAM | OR_ACS_DIV4 | OR_BI | OR_SCY_2_CLK)
+#define CONFIG_SYS_OR0_PRELIM		(vOR0_AM | OR_CSNT_SAM | OR_ACS_DIV4 | OR_BI | OR_SCY_2_CLK)
 #endif
 
 /*
@@ -463,8 +463,8 @@
  */
 #define vOR1_AM			((0xF800 << 16) + (0 << 15))
 #define vBR1_BA			((0x0000 << 16) + (0 << 15))
-#define CFG_OR1			(vOR1_AM | OR_CSNT_SAM | OR_BI)
-#define CFG_BR1			(vBR1_BA | BR_MS_UPMA | BR_V)
+#define CONFIG_SYS_OR1			(vOR1_AM | OR_CSNT_SAM | OR_BI)
+#define CONFIG_SYS_BR1			(vBR1_BA | BR_MS_UPMA | BR_V)
 
 /* Machine A Mode Register */
 
@@ -492,12 +492,12 @@
 
 /* For boards with 16M of SDRAM */
 #define SDRAM_16M_MAX_SIZE	0x01000000	/* max 16MB SDRAM */
-#define CFG_16M_MAMR		(vMAMR_PTA | MAMR_AMA_TYPE_0 | MAMR_DSA_2_CYCL | MAMR_G0CLA_A11 |\
+#define CONFIG_SYS_16M_MAMR		(vMAMR_PTA | MAMR_AMA_TYPE_0 | MAMR_DSA_2_CYCL | MAMR_G0CLA_A11 |\
 MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X)
 
 /* For boards with 32M of SDRAM */
 #define SDRAM_32M_MAX_SIZE	0x02000000	/* max 32MB SDRAM */
-#define CFG_32M_MAMR		(vMAMR_PTA | MAMR_AMA_TYPE_1 | MAMR_DSA_2_CYCL | MAMR_G0CLA_A10 |\
+#define CONFIG_SYS_32M_MAMR		(vMAMR_PTA | MAMR_AMA_TYPE_1 | MAMR_DSA_2_CYCL | MAMR_G0CLA_A10 |\
 MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X)
 
 
@@ -505,12 +505,12 @@ MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X)
 
 #if defined(CONFIG_CLOCK_66MHZ) || defined(CONFIG_CLOCK_80MHZ)
 /* Divide by 32 */
-#define CFG_MPTPR		0x02
+#define CONFIG_SYS_MPTPR		0x02
 #endif
 
 #if defined(CONFIG_CLOCK_16MHZ) || defined(CONFIG_CLOCK_33MHZ) || defined(CONFIG_CLOCK_50MHZ)
 /* Divide by 16 */
-#define CFG_MPTPR		0x04
+#define CONFIG_SYS_MPTPR		0x04
 #endif
 
 /*
@@ -518,24 +518,24 @@ MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X)
  * Base address = 0xF020_0000 - 0xF020_0FFF
  *
  */
-#define CFG_OR2_PRELIM		0xFFF00000
-#define CFG_BR2_PRELIM		0xF0200000
+#define CONFIG_SYS_OR2_PRELIM		0xFFF00000
+#define CONFIG_SYS_BR2_PRELIM		0xF0200000
 
 /*
  * BR3 and OR3 (External Bus CS3)
  * Base address = 0xF030_0000 - 0xF030_0FFF
  *
  */
-#define CFG_OR3_PRELIM		0xFFF00000
-#define CFG_BR3_PRELIM		0xF0300000
+#define CONFIG_SYS_OR3_PRELIM		0xFFF00000
+#define CONFIG_SYS_BR3_PRELIM		0xF0300000
 
 /*
  * BR4 and OR4 (External Bus CS3)
  * Base address = 0xF040_0000 - 0xF040_0FFF
  *
  */
-#define CFG_OR4_PRELIM		0xFFF00000
-#define CFG_BR4_PRELIM		0xF0400000
+#define CONFIG_SYS_OR4_PRELIM		0xFFF00000
+#define CONFIG_SYS_BR4_PRELIM		0xF0400000
 
 
 /*
@@ -543,24 +543,24 @@ MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X)
  * Base address = 0xF050_0000 - 0xF050_0FFF
  *
  */
-#define CFG_OR5_PRELIM		0xFFF00000
-#define CFG_BR5_PRELIM		0xF0500000
+#define CONFIG_SYS_OR5_PRELIM		0xFFF00000
+#define CONFIG_SYS_BR5_PRELIM		0xF0500000
 
 /*
  * BR6 and OR6 (Unused)
  * Base address = 0xF060_0000 - 0xF060_0FFF
  *
  */
-#define CFG_OR6_PRELIM		0xFFF00000
-#define CFG_BR6_PRELIM		0xF0600000
+#define CONFIG_SYS_OR6_PRELIM		0xFFF00000
+#define CONFIG_SYS_BR6_PRELIM		0xF0600000
 
 /*
  * BR7 and OR7 (Unused)
  * Base address = 0xF070_0000 - 0xF070_0FFF
  *
  */
-#define CFG_OR7_PRELIM		0xFFF00000
-#define CFG_BR7_PRELIM		0xF0700000
+#define CONFIG_SYS_OR7_PRELIM		0xFFF00000
+#define CONFIG_SYS_BR7_PRELIM		0xF0700000
 
 /*
  * Internal Definitions
diff --git a/include/configs/QS860T.h b/include/configs/QS860T.h
index c98090185..705d37524 100644
--- a/include/configs/QS860T.h
+++ b/include/configs/QS860T.h
@@ -35,14 +35,14 @@
 #define __CONFIG_H
 
 /* various debug settings */
-#undef CFG_DEVICE_NULLDEV		/* null device */
+#undef CONFIG_SYS_DEVICE_NULLDEV		/* null device */
 #undef CONFIG_SILENT_CONSOLE		/* silent console */
-#undef CFG_CONSOLE_INFO_QUIET		/* silent console ? */
+#undef CONFIG_SYS_CONSOLE_INFO_QUIET		/* silent console ? */
 #undef DEBUG_FLASH			/* debug flash code */
 #undef FLASH_DEBUG			/* debug fash code */
 #undef DEBUG_ENV			/* debug environment code */
 
-#define CFG_DIRECT_FLASH_TFTP	1	/* allow direct tftp to flash */
+#define CONFIG_SYS_DIRECT_FLASH_TFTP	1	/* allow direct tftp to flash */
 #define CONFIG_ENV_OVERWRITE	1	/* allow overwrite MAC address */
 
 
@@ -58,7 +58,7 @@
 #define CONFIG_MII
 #define FEC_INTERRUPT		SIU_LEVEL1
 #undef CONFIG_SCC1_ENET			/* SCC1 10BaseT ethernet */
-#define CFG_DISCOVER_PHY
+#define CONFIG_SYS_DISCOVER_PHY
 
 #undef CONFIG_8xx_CONS_SMC1
 #define CONFIG_8xx_CONS_SMC2	1	/* Console is on SMC */
@@ -83,7 +83,7 @@
 	"bootm"
 
 #define CONFIG_LOADS_ECHO	1	/* echo on for serial download */
-#undef CFG_LOADS_BAUD_CHANGE		/* don't allow baudrate change */
+#undef CONFIG_SYS_LOADS_BAUD_CHANGE		/* don't allow baudrate change */
 
 #undef CONFIG_WATCHDOG			/* watchdog disabled */
 
@@ -132,37 +132,37 @@ CONFIG_SPI
 /*
  * Environment variable storage is in NVRAM
  */
-#define CFG_ENV_IS_IN_NVRAM	1
-#define CFG_ENV_SIZE		0x00001000	/* We use only the last 4K for PPCBoot */
-#define CFG_ENV_ADDR		0xD100E000
+#define CONFIG_ENV_IS_IN_NVRAM	1
+#define CONFIG_ENV_SIZE		0x00001000	/* We use only the last 4K for PPCBoot */
+#define CONFIG_ENV_ADDR		0xD100E000
 
 /*
  * Miscellaneous configurable options
  */
-#define CFG_LONGHELP				/* undef to save memory */
-#define CFG_PROMPT		"=> "		/* Monitor Command Prompt */
+#define CONFIG_SYS_LONGHELP				/* undef to save memory */
+#define CONFIG_SYS_PROMPT		"=> "		/* Monitor Command Prompt */
 
-#define CFG_HUSH_PARSER		1		/* use "hush" command parser */
-#define CFG_PROMPT_HUSH_PS2	"> "
+#define CONFIG_SYS_HUSH_PARSER		1		/* use "hush" command parser */
+#define CONFIG_SYS_PROMPT_HUSH_PS2	"> "
 
 #if defined(CONFIG_CMD_KGDB)
-#define CFG_CBSIZE		1024		/* Console I/O Buffer Size */
+#define CONFIG_SYS_CBSIZE		1024		/* Console I/O Buffer Size */
 #else
-#define CFG_CBSIZE		256		/* Console I/O Buffer Size */
+#define CONFIG_SYS_CBSIZE		256		/* Console I/O Buffer Size */
 #endif
-#define CFG_PBSIZE		(CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define CFG_MAXARGS		16		/* max number of command args */
-#define CFG_BARGSIZE		CFG_CBSIZE	/* Boot Argument Buffer Size */
+#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS		16		/* max number of command args */
+#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size */
 
 /* TODO - size? */
-#define CFG_MEMTEST_START	0x0400000	/* memtest works */
-#define CFG_MEMTEST_END		0x0C00000	/* 4 ... 12 MB in DRAM */
+#define CONFIG_SYS_MEMTEST_START	0x0400000	/* memtest works */
+#define CONFIG_SYS_MEMTEST_END		0x0C00000	/* 4 ... 12 MB in DRAM */
 
-#define CFG_LOAD_ADDR		0x100000	/* default load address */
+#define CONFIG_SYS_LOAD_ADDR		0x100000	/* default load address */
 
-#define CFG_HZ			1000		/* decrementer freq: 1 ms ticks */
+#define CONFIG_SYS_HZ			1000		/* decrementer freq: 1 ms ticks */
 
-#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
 
 /*-----------------------------------------------------------------------
  * Low Level Configuration Settings
@@ -172,55 +172,55 @@ CONFIG_SPI
 /*-----------------------------------------------------------------------
  * Internal Memory Mapped Register
  */
-#define CFG_IMMR		0xF0000000
+#define CONFIG_SYS_IMMR		0xF0000000
 
 /*-----------------------------------------------------------------------
  * Definitions for initial stack pointer and data area (in DPRAM)
  */
-#define CFG_INIT_RAM_ADDR	CFG_IMMR
-#define CFG_INIT_RAM_END	0x2F00		/* End of used area in DPRAM */
-#define CFG_GBL_DATA_SIZE	64		/* size in bytes reserved for initial data */
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_IMMR
+#define CONFIG_SYS_INIT_RAM_END	0x2F00		/* End of used area in DPRAM */
+#define CONFIG_SYS_GBL_DATA_SIZE	64		/* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
 /*-----------------------------------------------------------------------
  * Start addresses for the final memory configuration
  * (Set up by the startup code)
- * Please note that CFG_SDRAM_BASE _must_ start at 0
+ * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
  */
-#define CFG_SDRAM_BASE		0x00000000
-#define CFG_FLASH_BASE		0xFFF00000
+#define CONFIG_SYS_SDRAM_BASE		0x00000000
+#define CONFIG_SYS_FLASH_BASE		0xFFF00000
 
-#define CFG_MONITOR_LEN		(192 << 10)	/* Reserve 192 kB for Monitor */
-#define CFG_MONITOR_BASE	CFG_FLASH_BASE
-#define CFG_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc() */
+#define CONFIG_SYS_MONITOR_LEN		(192 << 10)	/* Reserve 192 kB for Monitor */
+#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_FLASH_BASE
+#define CONFIG_SYS_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc() */
 
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
+#define CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
 
 /* TODO flash parameters */
 /*-----------------------------------------------------------------------
  * FLASH organization for Intel Strataflash
  */
-#define CFG_FLASH_16BIT		1		/* 16-bit wide flash memory */
-#define CFG_MAX_FLASH_BANKS	1		/* max number of memory banks */
-#define CFG_MAX_FLASH_SECT	64		/* max number of sectors on one chip */
+#define CONFIG_SYS_FLASH_16BIT		1		/* 16-bit wide flash memory */
+#define CONFIG_SYS_MAX_FLASH_BANKS	1		/* max number of memory banks */
+#define CONFIG_SYS_MAX_FLASH_SECT	64		/* max number of sectors on one chip */
 
-#define CFG_FLASH_ERASE_TOUT	120000		/* Timeout for Flash Erase (in ms) */
-#define CFG_FLASH_WRITE_TOUT	500		/* Timeout for Flash Write (in ms) */
+#define CONFIG_SYS_FLASH_ERASE_TOUT	120000		/* Timeout for Flash Erase (in ms) */
+#define CONFIG_SYS_FLASH_WRITE_TOUT	500		/* Timeout for Flash Write (in ms) */
 
-#undef	CFG_ENV_IS_IN_FLASH
+#undef	CONFIG_ENV_IS_IN_FLASH
 
 /*-----------------------------------------------------------------------
  * Cache Configuration
  */
-#define CFG_CACHELINE_SIZE	16		/* For all MPC8xx CPUs */
+#define CONFIG_SYS_CACHELINE_SIZE	16		/* For all MPC8xx CPUs */
 #if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT	4		/* log base 2 of the above value */
+#define CONFIG_SYS_CACHELINE_SHIFT	4		/* log base 2 of the above value */
 #endif
 
 /*-----------------------------------------------------------------------
@@ -230,47 +230,47 @@ CONFIG_SPI
  * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze
  */
 #if defined(CONFIG_WATCHDOG)
-#define CFG_SYPCR	(0xFFFFFF88 | SYPCR_SWE | SYPCR_SWRI)
+#define CONFIG_SYS_SYPCR	(0xFFFFFF88 | SYPCR_SWE | SYPCR_SWRI)
 #else
-#define CFG_SYPCR	0xFFFFFF88
+#define CONFIG_SYS_SYPCR	0xFFFFFF88
 #endif
 
 /*-----------------------------------------------------------------------
  * SIUMCR - SIU Module Configuration 11-6
  *-----------------------------------------------------------------------
  */
-#define CFG_SIUMCR	0x00620000
+#define CONFIG_SYS_SIUMCR	0x00620000
 
 /*-----------------------------------------------------------------------
  * TBSCR - Time Base Status and Control 11-26
  *-----------------------------------------------------------------------
  */
-#define CFG_TBSCR	0x00C3
+#define CONFIG_SYS_TBSCR	0x00C3
 
 /*-----------------------------------------------------------------------
  * RTCSC - Real-Time Clock Status and Control Register 11-27
  *-----------------------------------------------------------------------
  */
-#define CFG_RTCSC	(RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE)
+#define CONFIG_SYS_RTCSC	(RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE)
 
 /*-----------------------------------------------------------------------
  * PISCR - Periodic Interrupt Status and Control 11-31
  *-----------------------------------------------------------------------
  */
-#define CFG_PISCR	0x0082
+#define CONFIG_SYS_PISCR	0x0082
 
 /*-----------------------------------------------------------------------
  * PLPRCR - PLL, Low-Power, and Reset Control Register 15-30
  *-----------------------------------------------------------------------
  */
-#define CFG_PLPRCR	0x0090D000
+#define CONFIG_SYS_PLPRCR	0x0090D000
 
 /*-----------------------------------------------------------------------
  * SCCR - System Clock and reset Control Register		15-27
  *-----------------------------------------------------------------------
  */
 #define SCCR_MASK	SCCR_EBDF11
-#define CFG_SCCR	0x02000000
+#define CONFIG_SYS_SCCR	0x02000000
 
 
 /*-----------------------------------------------------------------------
@@ -278,9 +278,9 @@ CONFIG_SPI
  * 0x73E67C0F - All interrupts handled by BDM
  * 0x00824001 - Only interrupts needed by MWDebug.exe handled by BDM
  *-----------------------------------------------------------------------
-#define CFG_DER			0x73E67C0F
+#define CONFIG_SYS_DER			0x73E67C0F
 */
-#define CFG_DER			0x0082400F
+#define CONFIG_SYS_DER			0x0082400F
 
 
 /*-----------------------------------------------------------------------
@@ -292,12 +292,12 @@ CONFIG_SPI
  * BR0 and OR0 (AMD 512K Socketed FLASH)
  * Base address = 0xFFF0_0000 - 0xFFF7_FFFF (After relocation)
  */
-#define CFG_PRELIM_OR_AM
-#define CFG_OR_TIMING_FLASH
+#define CONFIG_SYS_PRELIM_OR_AM
+#define CONFIG_SYS_OR_TIMING_FLASH
 
 #define FLASH_BASE0_PRELIM	0xFFF00001
-#define CFG_OR0_PRELIM		0xFFF80D42
-#define CFG_BR0_PRELIM		0xFFF00401
+#define CONFIG_SYS_OR0_PRELIM		0xFFF80D42
+#define CONFIG_SYS_BR0_PRELIM		0xFFF00401
 
 
 /*
@@ -306,10 +306,10 @@ CONFIG_SPI
  */
 
 #define FLASH_BASE1_PRELIM	0xD0000000
-#define CFG_OR1_PRELIM		0xFF800D42
-#define CFG_BR1_PRELIM		0xD0000801
-/* #define CFG_OR1		0xFF800D42 */
-/* #define CFG_BR1		0xD0000801 */
+#define CONFIG_SYS_OR1_PRELIM		0xFF800D42
+#define CONFIG_SYS_BR1_PRELIM		0xD0000801
+/* #define CONFIG_SYS_OR1		0xFF800D42 */
+/* #define CONFIG_SYS_BR1		0xD0000801 */
 
 
 /*
@@ -327,15 +327,15 @@ CONFIG_SPI
 
 /* For boards with 16M of SDRAM */
 #define SDRAM_16M_MAX_SIZE	0x01000000	/* max 16MB SDRAM */
-#define CFG_16M_MBMR		0x18802114	/* Mem Periodic Timer Prescaler */
+#define CONFIG_SYS_16M_MBMR		0x18802114	/* Mem Periodic Timer Prescaler */
 
 /* For boards with 64M of SDRAM */
 #define SDRAM_64M_MAX_SIZE	0x04000000	/* max 64MB SDRAM */
 /* TODO - determine real value */
-#define CFG_64M_MBMR		0x18802114	/* Mem Period Timer Prescaler */
+#define CONFIG_SYS_64M_MBMR		0x18802114	/* Mem Period Timer Prescaler */
 
-#define CFG_OR2			(SDRAM_PRELIM_OR_AM | SDRAM_TIMING)
-#define CFG_BR2			(SDRAM_BASE | 0x000000C1)
+#define CONFIG_SYS_OR2			(SDRAM_PRELIM_OR_AM | SDRAM_TIMING)
+#define CONFIG_SYS_BR2			(SDRAM_BASE | 0x000000C1)
 
 
 /*
@@ -347,10 +347,10 @@ CONFIG_SPI
  *
  */
 
-#define CFG_OR3_PRELIM		0xFFC00DF6
-#define CFG_BR3_PRELIM		0xD1000401
-/* #define CFG_OR3		0xFFC00DF6 */
-/* #define CFG_BR3		0xD1000401 */
+#define CONFIG_SYS_OR3_PRELIM		0xFFC00DF6
+#define CONFIG_SYS_BR3_PRELIM		0xD1000401
+/* #define CONFIG_SYS_OR3		0xFFC00DF6 */
+/* #define CONFIG_SYS_BR3		0xD1000401 */
 
 
 /*
@@ -359,10 +359,10 @@ CONFIG_SPI
  *
  */
 
-#define CFG_OR4_PRELIM		0xFF000000
-#define CFG_BR4_PRELIM		0xE0000000
-/* #define CFG_OR4		0xFF000000 */
-/* #define CFG_BR4		0xE0000000 */
+#define CONFIG_SYS_OR4_PRELIM		0xFF000000
+#define CONFIG_SYS_BR4_PRELIM		0xE0000000
+/* #define CONFIG_SYS_OR4		0xFF000000 */
+/* #define CONFIG_SYS_BR4		0xE0000000 */
 
 
 /*
@@ -371,10 +371,10 @@ CONFIG_SPI
  *
  */
 
-#define CFG_OR5_PRELIM		0xFF000000
-#define CFG_BR5_PRELIM		0xE4000000
-/* #define CFG_OR5		0xFF000000 */
-/* #define CFG_BR5		0xE4000000 */
+#define CONFIG_SYS_OR5_PRELIM		0xFF000000
+#define CONFIG_SYS_BR5_PRELIM		0xE4000000
+/* #define CONFIG_SYS_OR5		0xFF000000 */
+/* #define CONFIG_SYS_BR5		0xE4000000 */
 
 
 /*
@@ -383,10 +383,10 @@ CONFIG_SPI
  *
  */
 
-#define CFG_OR6_PRELIM		0xFF000000
-#define CFG_BR6_PRELIM		0xE8000000
-/* #define CFG_OR6		0xFF000000 */
-/* #define CFG_BR6		0xE8000000 */
+#define CONFIG_SYS_OR6_PRELIM		0xFF000000
+#define CONFIG_SYS_BR6_PRELIM		0xE8000000
+/* #define CONFIG_SYS_OR6		0xFF000000 */
+/* #define CONFIG_SYS_BR6		0xE8000000 */
 
 
 /*
@@ -395,10 +395,10 @@ CONFIG_SPI
  *
  */
 
-#define CFG_OR7_PRELIM		0xFF000000
-#define CFG_BR7_PRELIM		0xE8000000
-/* #define CFG_OR7		0xFF000000 */
-/* #define CFG_BR7		0xE8000000 */
+#define CONFIG_SYS_OR7_PRELIM		0xFF000000
+#define CONFIG_SYS_BR7_PRELIM		0xE8000000
+/* #define CONFIG_SYS_OR7		0xFF000000 */
+/* #define CONFIG_SYS_BR7		0xE8000000 */
 
 
 /*
diff --git a/include/configs/R360MPI.h b/include/configs/R360MPI.h
index a653cca96..bab44606d 100644
--- a/include/configs/R360MPI.h
+++ b/include/configs/R360MPI.h
@@ -71,7 +71,7 @@
 #define	CONFIG_SCC2_ENET
 
 #define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
-#undef	CFG_LOADS_BAUD_CHANGE		/* don't allow baudrate change	*/
+#undef	CONFIG_SYS_LOADS_BAUD_CHANGE		/* don't allow baudrate change	*/
 
 #define	CONFIG_MISC_INIT_R		/* have misc_init_r() function	*/
 
@@ -95,8 +95,8 @@
 
 #define CONFIG_HARD_I2C		1	/* To I2C with hardware support */
 #undef CONFIG_SORT_I2C			/* To I2C with software support */
-#define CFG_I2C_SPEED		4700	/* I2C speed and slave address */
-#define CFG_I2C_SLAVE		0x7F
+#define CONFIG_SYS_I2C_SPEED		4700	/* I2C speed and slave address */
+#define CONFIG_SYS_I2C_SLAVE		0x7F
 
 /*
  * Software (bit-bang) I2C driver configuration
@@ -114,9 +114,9 @@
 				else    immr->im_cpm.cp_pbdat &= ~PB_SCL
 #define I2C_DELAY		udelay(50)
 
-#define CFG_I2C_LCD_ADDR	0x8	/* LCD Control */
-#define CFG_I2C_KEY_ADDR	0x9	/* Keyboard coprocessor */
-#define CFG_I2C_TEM_ADDR	0x49	/* Temperature Sensors */
+#define CONFIG_SYS_I2C_LCD_ADDR	0x8	/* LCD Control */
+#define CONFIG_SYS_I2C_KEY_ADDR	0x9	/* Keyboard coprocessor */
+#define CONFIG_SYS_I2C_TEM_ADDR	0x49	/* Temperature Sensors */
 
 
 /*
@@ -139,28 +139,28 @@
 /*
  * Miscellaneous configurable options
  */
-#define CFG_DEVICE_NULLDEV	1	/* we need the null device	*/
-#define CFG_CONSOLE_IS_IN_ENV	1	/* must set console from env	*/
+#define CONFIG_SYS_DEVICE_NULLDEV	1	/* we need the null device	*/
+#define CONFIG_SYS_CONSOLE_IS_IN_ENV	1	/* must set console from env	*/
 
-#define	CFG_LONGHELP			/* undef to save memory		*/
-#define	CFG_PROMPT	"=> "		/* Monitor Command Prompt	*/
+#define	CONFIG_SYS_LONGHELP			/* undef to save memory		*/
+#define	CONFIG_SYS_PROMPT	"=> "		/* Monitor Command Prompt	*/
 #if defined(CONFIG_CMD_KGDB)
-#define	CFG_CBSIZE	1024		/* Console I/O Buffer Size	*/
+#define	CONFIG_SYS_CBSIZE	1024		/* Console I/O Buffer Size	*/
 #else
-#define	CFG_CBSIZE	256		/* Console I/O Buffer Size	*/
+#define	CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size	*/
 #endif
-#define	CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define	CFG_MAXARGS	16		/* max number of command args	*/
-#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+#define	CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define	CONFIG_SYS_MAXARGS	16		/* max number of command args	*/
+#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
 
-#define CFG_MEMTEST_START	0x0400000	/* memtest works on	*/
-#define CFG_MEMTEST_END		0x0C00000	/* 4 ... 12 MB in DRAM	*/
+#define CONFIG_SYS_MEMTEST_START	0x0400000	/* memtest works on	*/
+#define CONFIG_SYS_MEMTEST_END		0x0C00000	/* 4 ... 12 MB in DRAM	*/
 
-#define	CFG_LOAD_ADDR		0x100000	/* default load address	*/
+#define	CONFIG_SYS_LOAD_ADDR		0x100000	/* default load address	*/
 
-#define	CFG_HZ		1000		/* decrementer freq: 1 ms ticks	*/
+#define	CONFIG_SYS_HZ		1000		/* decrementer freq: 1 ms ticks	*/
 
-#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
 
 /*
  * JFFS2 partitions
@@ -187,60 +187,60 @@
 /*-----------------------------------------------------------------------
  * Internal Memory Mapped Register
  */
-#define CFG_IMMR		0xFF000000
+#define CONFIG_SYS_IMMR		0xFF000000
 
 /*-----------------------------------------------------------------------
  * Definitions for initial stack pointer and data area (in DPRAM)
  */
-#define CFG_INIT_RAM_ADDR	CFG_IMMR
-#define	CFG_INIT_RAM_END	0x2F00	/* End of used area in DPRAM	*/
-#define	CFG_GBL_DATA_SIZE	64  /* size in bytes reserved for initial data */
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define	CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_IMMR
+#define	CONFIG_SYS_INIT_RAM_END	0x2F00	/* End of used area in DPRAM	*/
+#define	CONFIG_SYS_GBL_DATA_SIZE	64  /* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define	CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
 /*-----------------------------------------------------------------------
  * Start addresses for the final memory configuration
  * (Set up by the startup code)
- * Please note that CFG_SDRAM_BASE _must_ start at 0
+ * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
  */
-#define	CFG_SDRAM_BASE		0x00000000
-#define CFG_FLASH_BASE		0x40000000
+#define	CONFIG_SYS_SDRAM_BASE		0x00000000
+#define CONFIG_SYS_FLASH_BASE		0x40000000
 #if defined(DEBUG)
-#define	CFG_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor	*/
+#define	CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor	*/
 #else
-#define	CFG_MONITOR_LEN		(192 << 10)	/* Reserve 192 kB for Monitor	*/
+#define	CONFIG_SYS_MONITOR_LEN		(192 << 10)	/* Reserve 192 kB for Monitor	*/
 #endif
-#define CFG_MONITOR_BASE	CFG_FLASH_BASE
-#define	CFG_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/
+#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_FLASH_BASE
+#define	CONFIG_SYS_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/
 
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define	CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux	*/
+#define	CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux	*/
 
 /*-----------------------------------------------------------------------
  * FLASH organization
  */
-#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
-#define CFG_MAX_FLASH_SECT	128	/* max number of sectors on one chip	*/
+#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
+#define CONFIG_SYS_MAX_FLASH_SECT	128	/* max number of sectors on one chip	*/
 
-#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
-#define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
+#define CONFIG_SYS_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
+#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
 
-#define	CFG_ENV_IS_IN_FLASH	1
-#define	CFG_ENV_OFFSET		0x40000	/* Offset of Environment		*/
-#define	CFG_ENV_SECT_SIZE	0x20000	/* Total Size of Environment sector	*/
-#define	CFG_ENV_SIZE		0x4000	/* Used Size of Environment sector	*/
-#define	CFG_USE_PPCENV			/* Environment embedded in sect .ppcenv */
+#define	CONFIG_ENV_IS_IN_FLASH	1
+#define	CONFIG_ENV_OFFSET		0x40000	/* Offset of Environment		*/
+#define	CONFIG_ENV_SECT_SIZE	0x20000	/* Total Size of Environment sector	*/
+#define	CONFIG_ENV_SIZE		0x4000	/* Used Size of Environment sector	*/
+#define	CONFIG_SYS_USE_PPCENV			/* Environment embedded in sect .ppcenv */
 
 /*-----------------------------------------------------------------------
  * Cache Configuration
  */
-#define CFG_CACHELINE_SIZE	16	/* For all MPC8xx CPUs			*/
+#define CONFIG_SYS_CACHELINE_SIZE	16	/* For all MPC8xx CPUs			*/
 #if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT	4	/* log base 2 of the above value	*/
+#define CONFIG_SYS_CACHELINE_SHIFT	4	/* log base 2 of the above value	*/
 #endif
 
 /*-----------------------------------------------------------------------
@@ -250,10 +250,10 @@
  * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze
  */
 #if defined(CONFIG_WATCHDOG)
-#define CFG_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
+#define CONFIG_SYS_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
 			 SYPCR_SWE  | SYPCR_SWRI| SYPCR_SWP)
 #else
-#define CFG_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
+#define CONFIG_SYS_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
 #endif
 
 /*-----------------------------------------------------------------------
@@ -261,27 +261,27 @@
  *-----------------------------------------------------------------------
  * PCMCIA config., multi-function pin tri-state
  */
-#define CFG_SIUMCR	(SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_MLRC01)
+#define CONFIG_SYS_SIUMCR	(SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_MLRC01)
 
 /*-----------------------------------------------------------------------
  * TBSCR - Time Base Status and Control				11-26
  *-----------------------------------------------------------------------
  * Clear Reference Interrupt Status, Timebase freezing enabled
  */
-#define CFG_TBSCR	(TBSCR_REFA | TBSCR_REFB | TBSCR_TBE)
+#define CONFIG_SYS_TBSCR	(TBSCR_REFA | TBSCR_REFB | TBSCR_TBE)
 
 /*-----------------------------------------------------------------------
  * RTCSC - Real-Time Clock Status and Control Register		11-27
  *-----------------------------------------------------------------------
  */
-#define CFG_RTCSC	(RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE)
+#define CONFIG_SYS_RTCSC	(RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE)
 
 /*-----------------------------------------------------------------------
  * PISCR - Periodic Interrupt Status and Control		11-31
  *-----------------------------------------------------------------------
  * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
  */
-#define CFG_PISCR	(PISCR_PS | PISCR_PITF)
+#define CONFIG_SYS_PISCR	(PISCR_PS | PISCR_PITF)
 
 /*-----------------------------------------------------------------------
  * PLPRCR - PLL, Low-Power, and Reset Control Register		15-30
@@ -292,10 +292,10 @@
  * If this is a 80 MHz CPU, set PLL multiplication factor to 5 (5*16=80)!
  */
 #ifdef	CONFIG_80MHz	/* for 80 MHz, we use a 16 MHz clock * 5 */
-#define CFG_PLPRCR							\
+#define CONFIG_SYS_PLPRCR							\
 		( (5-1)<<PLPRCR_MF_SHIFT | PLPRCR_TEXPS | PLPRCR_TMIST )
 #else			/* up to 50 MHz we use a 1:1 clock */
-#define CFG_PLPRCR	(PLPRCR_SPLSS | PLPRCR_TEXPS | PLPRCR_TMIST)
+#define CONFIG_SYS_PLPRCR	(PLPRCR_SPLSS | PLPRCR_TEXPS | PLPRCR_TMIST)
 #endif	/* CONFIG_80MHz */
 
 /*-----------------------------------------------------------------------
@@ -305,7 +305,7 @@
  * power management and some other internal clocks
  */
 #define SCCR_MASK	SCCR_EBDF11
-#define CFG_SCCR	(SCCR_TBS     | \
+#define CONFIG_SYS_SCCR	(SCCR_TBS     | \
 			 SCCR_COM00   | SCCR_DFSYNC00 | SCCR_DFBRG00  | \
 			 SCCR_DFNL000 | SCCR_DFNH000  | SCCR_DFLCD000 | \
 			 SCCR_DFALCD00)
@@ -315,14 +315,14 @@
  *-----------------------------------------------------------------------
  *
  */
-#define CFG_PCMCIA_MEM_ADDR	(0xE0000000)
-#define CFG_PCMCIA_MEM_SIZE	( 64 << 20 )
-#define CFG_PCMCIA_DMA_ADDR	(0xE4000000)
-#define CFG_PCMCIA_DMA_SIZE	( 64 << 20 )
-#define CFG_PCMCIA_ATTRB_ADDR	(0xE8000000)
-#define CFG_PCMCIA_ATTRB_SIZE	( 64 << 20 )
-#define CFG_PCMCIA_IO_ADDR	(0xEC000000)
-#define CFG_PCMCIA_IO_SIZE	( 64 << 20 )
+#define CONFIG_SYS_PCMCIA_MEM_ADDR	(0xE0000000)
+#define CONFIG_SYS_PCMCIA_MEM_SIZE	( 64 << 20 )
+#define CONFIG_SYS_PCMCIA_DMA_ADDR	(0xE4000000)
+#define CONFIG_SYS_PCMCIA_DMA_SIZE	( 64 << 20 )
+#define CONFIG_SYS_PCMCIA_ATTRB_ADDR	(0xE8000000)
+#define CONFIG_SYS_PCMCIA_ATTRB_SIZE	( 64 << 20 )
+#define CONFIG_SYS_PCMCIA_IO_ADDR	(0xEC000000)
+#define CONFIG_SYS_PCMCIA_IO_SIZE	( 64 << 20 )
 
 /*-----------------------------------------------------------------------
  * IDE/ATA stuff (Supports IDE harddisk on PCMCIA Adapter)
@@ -336,21 +336,21 @@
 #undef	CONFIG_IDE_LED			/* LED   for ide not supported	*/
 #undef	CONFIG_IDE_RESET		/* reset for ide not supported	*/
 
-#define CFG_IDE_MAXBUS		1	/* max. 1 IDE bus		*/
-#define CFG_IDE_MAXDEVICE	1	/* max. 1 drive per IDE bus	*/
+#define CONFIG_SYS_IDE_MAXBUS		1	/* max. 1 IDE bus		*/
+#define CONFIG_SYS_IDE_MAXDEVICE	1	/* max. 1 drive per IDE bus	*/
 
-#define CFG_ATA_IDE0_OFFSET	0x0000
+#define CONFIG_SYS_ATA_IDE0_OFFSET	0x0000
 
-#define CFG_ATA_BASE_ADDR	CFG_PCMCIA_MEM_ADDR
+#define CONFIG_SYS_ATA_BASE_ADDR	CONFIG_SYS_PCMCIA_MEM_ADDR
 
 /* Offset for data I/O			*/
-#define CFG_ATA_DATA_OFFSET	(CFG_PCMCIA_MEM_SIZE + 0x320)
+#define CONFIG_SYS_ATA_DATA_OFFSET	(CONFIG_SYS_PCMCIA_MEM_SIZE + 0x320)
 
 /* Offset for normal register accesses	*/
-#define CFG_ATA_REG_OFFSET	(2 * CFG_PCMCIA_MEM_SIZE + 0x320)
+#define CONFIG_SYS_ATA_REG_OFFSET	(2 * CONFIG_SYS_PCMCIA_MEM_SIZE + 0x320)
 
 /* Offset for alternate registers	*/
-#define CFG_ATA_ALT_OFFSET	0x0100
+#define CONFIG_SYS_ATA_ALT_OFFSET	0x0100
 #endif
 
 /*-----------------------------------------------------------------------
@@ -358,7 +358,7 @@
  *-----------------------------------------------------------------------
  *
  */
-#define CFG_DER	0
+#define CONFIG_SYS_DER	0
 
 /*
  * Init Memory Controller:
@@ -372,17 +372,17 @@
  * restrict access enough to keep SRAM working (if any)
  * but not too much to meddle with FLASH accesses
  */
-#define CFG_REMAP_OR_AM		0x80000000	/* OR addr mask */
-#define CFG_PRELIM_OR_AM	0xFF000000	/* OR addr mask */
+#define CONFIG_SYS_REMAP_OR_AM		0x80000000	/* OR addr mask */
+#define CONFIG_SYS_PRELIM_OR_AM	0xFF000000	/* OR addr mask */
 
 /*
  * FLASH timing:
  */
-#define CFG_OR_TIMING_FLASH	(OR_ACS_DIV1 | OR_SCY_7_CLK | OR_BI)
+#define CONFIG_SYS_OR_TIMING_FLASH	(OR_ACS_DIV1 | OR_SCY_7_CLK | OR_BI)
 
-#define CFG_OR0_REMAP	(CFG_REMAP_OR_AM  | CFG_OR_TIMING_FLASH)
-#define CFG_OR0_PRELIM	(CFG_PRELIM_OR_AM | CFG_OR_TIMING_FLASH)
-#define CFG_BR0_PRELIM	((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_PS_16 | BR_V )
+#define CONFIG_SYS_OR0_REMAP	(CONFIG_SYS_REMAP_OR_AM  | CONFIG_SYS_OR_TIMING_FLASH)
+#define CONFIG_SYS_OR0_PRELIM	(CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_FLASH)
+#define CONFIG_SYS_BR0_PRELIM	((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_PS_16 | BR_V )
 
 
 /*
@@ -392,23 +392,23 @@
 #define SDRAM_BASE2_PRELIM	0x00000000	/* SDRAM bank #0	*/
 #define	SDRAM_MAX_SIZE		0x04000000	/* max 64 MB per bank	*/
 
-#define CFG_PRELIM_OR2_AM	0xF8000000	/* OR addr mask */
+#define CONFIG_SYS_PRELIM_OR2_AM	0xF8000000	/* OR addr mask */
 
 /* SDRAM timing: Multiplexed addresses, GPL5 output to GPL5_A (don't care)	*/
-#define CFG_OR_TIMING_SDRAM	(OR_ACS_DIV1  | OR_CSNT_SAM | \
+#define CONFIG_SYS_OR_TIMING_SDRAM	(OR_ACS_DIV1  | OR_CSNT_SAM | \
 				 OR_SCY_0_CLK | OR_G5LS)
 
-#define CFG_OR2_PRELIM	(CFG_PRELIM_OR2_AM | CFG_OR_TIMING_SDRAM )
-#define CFG_BR2_PRELIM	((SDRAM_BASE2_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
+#define CONFIG_SYS_OR2_PRELIM	(CONFIG_SYS_PRELIM_OR2_AM | CONFIG_SYS_OR_TIMING_SDRAM )
+#define CONFIG_SYS_BR2_PRELIM	((SDRAM_BASE2_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
 
 /*
  * BR3 and OR3 (CAN Controller)
  */
 #ifdef CONFIG_CAN_DRIVER
-#define CFG_CAN_BASE		0xC0000000	/* CAN base address   */
-#define CFG_CAN_OR_AM		0xFFFF8000	/* 32 kB address mask */
-#define CFG_OR3_CAN		(CFG_CAN_OR_AM | OR_G5LA |OR_BI)
-#define CFG_BR3_CAN		((CFG_CAN_BASE & BR_BA_MSK) | \
+#define CONFIG_SYS_CAN_BASE		0xC0000000	/* CAN base address   */
+#define CONFIG_SYS_CAN_OR_AM		0xFFFF8000	/* 32 kB address mask */
+#define CONFIG_SYS_OR3_CAN		(CONFIG_SYS_CAN_OR_AM | OR_G5LA |OR_BI)
+#define CONFIG_SYS_BR3_CAN		((CONFIG_SYS_CAN_BASE & BR_BA_MSK) | \
 				 BR_PS_8 | BR_MS_UPMB | BR_V)
 #endif	/* CONFIG_CAN_DRIVER */
 
@@ -440,11 +440,11 @@
  * 80 Mhz => 80.000.000 / Divider = 156
  */
 #if   defined(CONFIG_80MHz)
-#define CFG_MAMR_PTA		156
+#define CONFIG_SYS_MAMR_PTA		156
 #elif defined(CONFIG_66MHz)
-#define CFG_MAMR_PTA		129
+#define CONFIG_SYS_MAMR_PTA		129
 #else		/*   50 MHz */
-#define CFG_MAMR_PTA		 98
+#define CONFIG_SYS_MAMR_PTA		 98
 #endif	/*CONFIG_??MHz */
 
 /*
@@ -452,26 +452,26 @@
  * (= 64 ms / 2K = 125 / quad bursts).
  * For a simpler initialization, 15.6 us is used instead.
  *
- * #define CFG_MPTPR_2BK_2K	MPTPR_PTP_DIV32		for 2 banks
- * #define CFG_MPTPR_1BK_2K	MPTPR_PTP_DIV64		for 1 bank
+ * #define CONFIG_SYS_MPTPR_2BK_2K	MPTPR_PTP_DIV32		for 2 banks
+ * #define CONFIG_SYS_MPTPR_1BK_2K	MPTPR_PTP_DIV64		for 1 bank
  */
-#define CFG_MPTPR_2BK_4K	MPTPR_PTP_DIV16		/* setting for 2 banks	*/
-#define CFG_MPTPR_1BK_4K	MPTPR_PTP_DIV32		/* setting for 1 bank	*/
+#define CONFIG_SYS_MPTPR_2BK_4K	MPTPR_PTP_DIV16		/* setting for 2 banks	*/
+#define CONFIG_SYS_MPTPR_1BK_4K	MPTPR_PTP_DIV32		/* setting for 1 bank	*/
 
 /* refresh rate 7.8 us (= 64 ms / 8K = 31.2 / quad bursts) for 256 MBit		*/
-#define CFG_MPTPR_2BK_8K	MPTPR_PTP_DIV8		/* setting for 2 banks	*/
-#define CFG_MPTPR_1BK_8K	MPTPR_PTP_DIV16		/* setting for 1 bank	*/
+#define CONFIG_SYS_MPTPR_2BK_8K	MPTPR_PTP_DIV8		/* setting for 2 banks	*/
+#define CONFIG_SYS_MPTPR_1BK_8K	MPTPR_PTP_DIV16		/* setting for 1 bank	*/
 
 /*
  * MAMR settings for SDRAM
  */
 
 /* 8 column SDRAM */
-#define CFG_MAMR_8COL	((CFG_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
+#define CONFIG_SYS_MAMR_8COL	((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
 			 MAMR_AMA_TYPE_0 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A11 |	\
 			 MAMR_RLFA_1X	 | MAMR_WLFA_1X	   | MAMR_TLFA_4X)
 /* 9 column SDRAM */
-#define CFG_MAMR_9COL	((CFG_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
+#define CONFIG_SYS_MAMR_9COL	((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
 			 MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 |	\
 			 MAMR_RLFA_1X	 | MAMR_WLFA_1X	   | MAMR_TLFA_4X)
 
diff --git a/include/configs/RBC823.h b/include/configs/RBC823.h
index 9222d2155..280175af1 100644
--- a/include/configs/RBC823.h
+++ b/include/configs/RBC823.h
@@ -71,7 +71,7 @@
 	"bootm"
 
 #define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
-#undef	CFG_LOADS_BAUD_CHANGE		/* don't allow baudrate change	*/
+#undef	CONFIG_SYS_LOADS_BAUD_CHANGE		/* don't allow baudrate change	*/
 
 #undef	CONFIG_WATCHDOG			/* watchdog disabled		*/
 
@@ -95,12 +95,12 @@
 #undef	CONFIG_RTC_MPC8xx		/* don't use internal RTC of MPC8xx (no battery)	*/
 
 #define CONFIG_HARD_I2C
-#define CFG_I2C_SPEED 40000
-#define CFG_I2C_SLAVE 0xfe
-#define CFG_I2C_EEPROM_ADDR		0x50
-#define CFG_I2C_EEPROM_ADDR_LEN		1
-#define CFG_EEPROM_WRITE_BITS		4
-#define CFG_EEPROM_WRITE_DELAY_MS	10
+#define CONFIG_SYS_I2C_SPEED 40000
+#define CONFIG_SYS_I2C_SLAVE 0xfe
+#define CONFIG_SYS_I2C_EEPROM_ADDR		0x50
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN		1
+#define CONFIG_SYS_EEPROM_WRITE_BITS		4
+#define CONFIG_SYS_EEPROM_WRITE_DELAY_MS	10
 
 /*
  * Command line configuration.
@@ -133,25 +133,25 @@
 /*
  * Miscellaneous configurable options
  */
-#define	CFG_LONGHELP			/* undef to save memory		*/
-#define	CFG_PROMPT	"=> "		/* Monitor Command Prompt	*/
+#define	CONFIG_SYS_LONGHELP			/* undef to save memory		*/
+#define	CONFIG_SYS_PROMPT	"=> "		/* Monitor Command Prompt	*/
 #if defined(CONFIG_CMD_KGDB)
-#define	CFG_CBSIZE	1024		/* Console I/O Buffer Size	*/
+#define	CONFIG_SYS_CBSIZE	1024		/* Console I/O Buffer Size	*/
 #else
-#define	CFG_CBSIZE	256		/* Console I/O Buffer Size	*/
+#define	CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size	*/
 #endif
-#define	CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define	CFG_MAXARGS	16		/* max number of command args	*/
-#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+#define	CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define	CONFIG_SYS_MAXARGS	16		/* max number of command args	*/
+#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
 
-#define CFG_MEMTEST_START	0x0400000	/* memtest works on	*/
-#define CFG_MEMTEST_END		0x0C00000	/* 4 ... 12 MB in DRAM	*/
+#define CONFIG_SYS_MEMTEST_START	0x0400000	/* memtest works on	*/
+#define CONFIG_SYS_MEMTEST_END		0x0C00000	/* 4 ... 12 MB in DRAM	*/
 
-#define	CFG_LOAD_ADDR		0x0100000	/* default load address	*/
+#define	CONFIG_SYS_LOAD_ADDR		0x0100000	/* default load address	*/
 
-#define	CFG_HZ		1000		/* decrementer freq: 1 ms ticks	*/
+#define	CONFIG_SYS_HZ		1000		/* decrementer freq: 1 ms ticks	*/
 
-#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
 
 /*
  * Low Level Configuration Settings
@@ -161,58 +161,58 @@
 /*-----------------------------------------------------------------------
  * Internal Memory Mapped Register
  */
-#define CFG_IMMR		0xFF000000
+#define CONFIG_SYS_IMMR		0xFF000000
 
 /*-----------------------------------------------------------------------
  * Definitions for initial stack pointer and data area (in DPRAM)
  */
-#define CFG_INIT_RAM_ADDR	CFG_IMMR
-#define	CFG_INIT_RAM_END	0x2F00	/* End of used area in DPRAM	*/
-#define	CFG_GBL_DATA_SIZE	64  /* size in bytes reserved for initial data */
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define	CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_IMMR
+#define	CONFIG_SYS_INIT_RAM_END	0x2F00	/* End of used area in DPRAM	*/
+#define	CONFIG_SYS_GBL_DATA_SIZE	64  /* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define	CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
 /*-----------------------------------------------------------------------
  * Start addresses for the final memory configuration
  * (Set up by the startup code)
- * Please note that CFG_SDRAM_BASE _must_ start at 0
+ * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
  */
-#define	CFG_SDRAM_BASE		0x00000000
-#define CFG_FLASH_BASE		0xFFF00000
+#define	CONFIG_SYS_SDRAM_BASE		0x00000000
+#define CONFIG_SYS_FLASH_BASE		0xFFF00000
 #if defined(DEBUG)
-#define	CFG_MONITOR_LEN		(384 << 10)	/* Reserve 256 kB for Monitor	*/
+#define	CONFIG_SYS_MONITOR_LEN		(384 << 10)	/* Reserve 256 kB for Monitor	*/
 #else
-#define	CFG_MONITOR_LEN		(384 << 10)	/* Reserve 192 kB for Monitor	*/
+#define	CONFIG_SYS_MONITOR_LEN		(384 << 10)	/* Reserve 192 kB for Monitor	*/
 #endif
-#define CFG_MONITOR_BASE	CFG_FLASH_BASE
-#define	CFG_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/
+#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_FLASH_BASE
+#define	CONFIG_SYS_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/
 
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define	CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux	*/
+#define	CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux	*/
 
 /*-----------------------------------------------------------------------
  * FLASH organization
  */
-#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
-#define CFG_MAX_FLASH_SECT	67	/* max number of sectors on one chip	*/
+#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
+#define CONFIG_SYS_MAX_FLASH_SECT	67	/* max number of sectors on one chip	*/
 
-#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
-#define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
+#define CONFIG_SYS_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
+#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
 
-#define	CFG_ENV_IS_IN_FLASH	1
-#define	CFG_ENV_OFFSET		0x10000	/*   Offset   of Environment Sector	*/
-#define	CFG_ENV_SIZE		0x10000	/* Total Size of Environment Sector	*/
+#define	CONFIG_ENV_IS_IN_FLASH	1
+#define	CONFIG_ENV_OFFSET		0x10000	/*   Offset   of Environment Sector	*/
+#define	CONFIG_ENV_SIZE		0x10000	/* Total Size of Environment Sector	*/
 
 /*-----------------------------------------------------------------------
  * Cache Configuration
  */
-#define CFG_CACHELINE_SIZE	16	/* For all MPC8xx CPUs			*/
+#define CONFIG_SYS_CACHELINE_SIZE	16	/* For all MPC8xx CPUs			*/
 #if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT	4	/* log base 2 of the above value	*/
+#define CONFIG_SYS_CACHELINE_SHIFT	4	/* log base 2 of the above value	*/
 #endif
 
 /*-----------------------------------------------------------------------
@@ -222,13 +222,13 @@
  * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze
  */
 #if defined(CONFIG_WATCHDOG)
-#define CFG_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
+#define CONFIG_SYS_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
 			 SYPCR_SWE  | SYPCR_SWRI| SYPCR_SWP)
 #else
 /*
-#define CFG_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
+#define CONFIG_SYS_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
 */
-#define CFG_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWRI | SYPCR_SWP)
+#define CONFIG_SYS_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWRI | SYPCR_SWP)
 #endif
 
 /*-----------------------------------------------------------------------
@@ -236,27 +236,27 @@
  *-----------------------------------------------------------------------
  * PCMCIA config., multi-function pin tri-state
  */
-#define CFG_SIUMCR	(SIUMCR_DBGC11 | SIUMCR_DBPC00 | SIUMCR_MLRC00 | SIUMCR_FRC)
+#define CONFIG_SYS_SIUMCR	(SIUMCR_DBGC11 | SIUMCR_DBPC00 | SIUMCR_MLRC00 | SIUMCR_FRC)
 
 /*-----------------------------------------------------------------------
  * TBSCR - Time Base Status and Control				11-26
  *-----------------------------------------------------------------------
  * Clear Reference Interrupt Status, Timebase freezing enabled
  */
-#define CFG_TBSCR	(TBSCR_REFA | TBSCR_REFB | TBSCR_TBF)
+#define CONFIG_SYS_TBSCR	(TBSCR_REFA | TBSCR_REFB | TBSCR_TBF)
 
 /*-----------------------------------------------------------------------
  * RTCSC - Real-Time Clock Status and Control Register		11-27
  *-----------------------------------------------------------------------
  */
-#define CFG_RTCSC	(RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE)
+#define CONFIG_SYS_RTCSC	(RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE)
 
 /*-----------------------------------------------------------------------
  * PISCR - Periodic Interrupt Status and Control		11-31
  *-----------------------------------------------------------------------
  * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
  */
-#define CFG_PISCR	(PISCR_PS | PISCR_PITF)
+#define CONFIG_SYS_PISCR	(PISCR_PS | PISCR_PITF)
 
 /*-----------------------------------------------------------------------
  * PLPRCR - PLL, Low-Power, and Reset Control Register		15-30
@@ -269,7 +269,7 @@
 /*
  * for 48 MHz, we use a 4 MHz clock * 12
  */
-#define CFG_PLPRCR							\
+#define CONFIG_SYS_PLPRCR							\
 		( (12-1)<<PLPRCR_MF_SHIFT | PLPRCR_TEXPS | PLPRCR_LOLRE )
 
 /*-----------------------------------------------------------------------
@@ -279,7 +279,7 @@
  * power management and some other internal clocks
  */
 #define SCCR_MASK	SCCR_EBDF11
-#define CFG_SCCR	(SCCR_RTDIV   | SCCR_RTSEL    | SCCR_CRQEN    | \
+#define CONFIG_SYS_SCCR	(SCCR_RTDIV   | SCCR_RTSEL    | SCCR_CRQEN    | \
 		         SCCR_PRQEN   | SCCR_EBDF00   | \
 		         SCCR_COM01   | SCCR_DFSYNC00 | SCCR_DFBRG00  | \
 			 SCCR_DFNL000 | SCCR_DFNH000  | SCCR_DFLCD001 | \
@@ -291,14 +291,14 @@
  *-----------------------------------------------------------------------
  *
  */
-#define CFG_PCMCIA_MEM_ADDR	(0xE0000000)
-#define CFG_PCMCIA_MEM_SIZE	( 64 << 20 )
-#define CFG_PCMCIA_DMA_ADDR	(0xE4000000)
-#define CFG_PCMCIA_DMA_SIZE	( 64 << 20 )
-#define CFG_PCMCIA_ATTRB_ADDR	(0xE8000000)
-#define CFG_PCMCIA_ATTRB_SIZE	( 64 << 20 )
-#define CFG_PCMCIA_IO_ADDR	(0xEC000000)
-#define CFG_PCMCIA_IO_SIZE	( 64 << 20 )
+#define CONFIG_SYS_PCMCIA_MEM_ADDR	(0xE0000000)
+#define CONFIG_SYS_PCMCIA_MEM_SIZE	( 64 << 20 )
+#define CONFIG_SYS_PCMCIA_DMA_ADDR	(0xE4000000)
+#define CONFIG_SYS_PCMCIA_DMA_SIZE	( 64 << 20 )
+#define CONFIG_SYS_PCMCIA_ATTRB_ADDR	(0xE8000000)
+#define CONFIG_SYS_PCMCIA_ATTRB_SIZE	( 64 << 20 )
+#define CONFIG_SYS_PCMCIA_IO_ADDR	(0xEC000000)
+#define CONFIG_SYS_PCMCIA_IO_SIZE	( 64 << 20 )
 
 /*-----------------------------------------------------------------------
  * IDE/ATA stuff (Supports IDE harddisk on PCMCIA Adapter)
@@ -311,39 +311,39 @@
 #undef	CONFIG_IDE_LED			/* LED   for ide not supported	*/
 #undef	CONFIG_IDE_RESET		/* reset for ide not supported	*/
 
-#define CFG_IDE_MAXBUS		1	/* max. 1 IDE bus		*/
-#define CFG_IDE_MAXDEVICE	1	/* max. 1 drive per IDE bus	*/
+#define CONFIG_SYS_IDE_MAXBUS		1	/* max. 1 IDE bus		*/
+#define CONFIG_SYS_IDE_MAXDEVICE	1	/* max. 1 drive per IDE bus	*/
 
-#define CFG_ATA_IDE0_OFFSET	0x0000
+#define CONFIG_SYS_ATA_IDE0_OFFSET	0x0000
 
-#define CFG_ATA_BASE_ADDR	CFG_PCMCIA_MEM_ADDR
+#define CONFIG_SYS_ATA_BASE_ADDR	CONFIG_SYS_PCMCIA_MEM_ADDR
 
 /* Offset for data I/O			*/
-#define CFG_ATA_DATA_OFFSET	(CFG_PCMCIA_MEM_SIZE + 0x320)
+#define CONFIG_SYS_ATA_DATA_OFFSET	(CONFIG_SYS_PCMCIA_MEM_SIZE + 0x320)
 
 /* Offset for normal register accesses	*/
-#define CFG_ATA_REG_OFFSET	(2 * CFG_PCMCIA_MEM_SIZE + 0x320)
+#define CONFIG_SYS_ATA_REG_OFFSET	(2 * CONFIG_SYS_PCMCIA_MEM_SIZE + 0x320)
 
 /* Offset for alternate registers	*/
-#define CFG_ATA_ALT_OFFSET	0x0100
+#define CONFIG_SYS_ATA_ALT_OFFSET	0x0100
 
 #endif
 
 /************************************************************
  * Disk-On-Chip configuration
  ************************************************************/
-#define CFG_MAX_DOC_DEVICE	1	/* Max number of DOC devices		*/
-#define CFG_DOC_SHORT_TIMEOUT
-#define CFG_DOC_SUPPORT_2000
-#define CFG_DOC_SUPPORT_MILLENNIUM
+#define CONFIG_SYS_MAX_DOC_DEVICE	1	/* Max number of DOC devices		*/
+#define CONFIG_SYS_DOC_SHORT_TIMEOUT
+#define CONFIG_SYS_DOC_SUPPORT_2000
+#define CONFIG_SYS_DOC_SUPPORT_MILLENNIUM
 
 /*-----------------------------------------------------------------------
  *
  *-----------------------------------------------------------------------
  *
  */
-/*#define	CFG_DER	0x2002000F*/
-#define CFG_DER	0
+/*#define	CONFIG_SYS_DER	0x2002000F*/
+#define CONFIG_SYS_DER	0
 
 /*
  * Init Memory Controller:
@@ -358,18 +358,18 @@
  * restrict access enough to keep SRAM working (if any)
  * but not too much to meddle with FLASH accesses
  */
-#define CFG_PRELIM_OR_AM	0xFFF80000	/* OR addr mask */
+#define CONFIG_SYS_PRELIM_OR_AM	0xFFF80000	/* OR addr mask */
 
 /* FLASH timing: ACS = 00, TRLX = 0, CSNT = 1, SCY = 7, EHTR = 1	*/
-#define CFG_OR_TIMING_FLASH  (OR_ACS_DIV1 | OR_BI | OR_SCY_7_CLK | OR_EHTR)
+#define CONFIG_SYS_OR_TIMING_FLASH  (OR_ACS_DIV1 | OR_BI | OR_SCY_7_CLK | OR_EHTR)
 
-#define CFG_OR_TIMING_MSYS   (OR_ACS_DIV1 | OR_BI)
+#define CONFIG_SYS_OR_TIMING_MSYS   (OR_ACS_DIV1 | OR_BI)
 
-#define CFG_OR0_PRELIM	(CFG_PRELIM_OR_AM | CFG_OR_TIMING_FLASH)
-#define CFG_BR0_PRELIM	((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_PS_8 | BR_V)
+#define CONFIG_SYS_OR0_PRELIM	(CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_FLASH)
+#define CONFIG_SYS_BR0_PRELIM	((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_PS_8 | BR_V)
 
-#define CFG_OR1_PRELIM	(CFG_PRELIM_OR_AM | CFG_OR_TIMING_MSYS)
-#define CFG_BR1_PRELIM	((FLASH_BASE1_PRELIM & BR_BA_MSK) | BR_MS_UPMB | \
+#define CONFIG_SYS_OR1_PRELIM	(CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_MSYS)
+#define CONFIG_SYS_BR1_PRELIM	((FLASH_BASE1_PRELIM & BR_BA_MSK) | BR_MS_UPMB | \
 		          BR_PS_8 | BR_V)
 
 /*
@@ -382,36 +382,36 @@
 /*
  * SDRAM timing:
  */
-#define CFG_OR_TIMING_SDRAM	(OR_CSNT_SAM)
+#define CONFIG_SYS_OR_TIMING_SDRAM	(OR_CSNT_SAM)
 
-#define CFG_OR4_PRELIM	(~(SDRAM_MAX_SIZE-1) | CFG_OR_TIMING_SDRAM )
-#define CFG_BR4_PRELIM	((SDRAM_BASE4_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
+#define CONFIG_SYS_OR4_PRELIM	(~(SDRAM_MAX_SIZE-1) | CONFIG_SYS_OR_TIMING_SDRAM )
+#define CONFIG_SYS_BR4_PRELIM	((SDRAM_BASE4_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
 
 /*
  * Memory Periodic Timer Prescaler
  */
 
 /* periodic timer for refresh */
-#define CFG_MAMR_PTA	187		/* start with divider for 48 MHz	*/
+#define CONFIG_SYS_MAMR_PTA	187		/* start with divider for 48 MHz	*/
 
 /* refresh rate 15.6 us (= 64 ms / 4K = 62.4 / quad bursts) for <= 128 MBit	*/
-#define CFG_MPTPR_2BK_4K	MPTPR_PTP_DIV16		/* setting for 2 banks	*/
-#define CFG_MPTPR_1BK_4K	MPTPR_PTP_DIV32		/* setting for 1 bank	*/
+#define CONFIG_SYS_MPTPR_2BK_4K	MPTPR_PTP_DIV16		/* setting for 2 banks	*/
+#define CONFIG_SYS_MPTPR_1BK_4K	MPTPR_PTP_DIV32		/* setting for 1 bank	*/
 
 /* refresh rate 7.8 us (= 64 ms / 8K = 31.2 / quad bursts) for 256 MBit		*/
-#define CFG_MPTPR_2BK_8K	MPTPR_PTP_DIV8		/* setting for 2 banks	*/
-#define CFG_MPTPR_1BK_8K	MPTPR_PTP_DIV16		/* setting for 1 bank	*/
+#define CONFIG_SYS_MPTPR_2BK_8K	MPTPR_PTP_DIV8		/* setting for 2 banks	*/
+#define CONFIG_SYS_MPTPR_1BK_8K	MPTPR_PTP_DIV16		/* setting for 1 bank	*/
 
 /*
  * MAMR settings for SDRAM
  */
 
 /* 8 column SDRAM */
-#define CFG_MAMR_8COL	((CFG_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
+#define CONFIG_SYS_MAMR_8COL	((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
 			 MAMR_AMA_TYPE_0 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A11 |	\
 			 MAMR_RLFA_1X	 | MAMR_WLFA_1X	   | MAMR_TLFA_4X)
 /* 9 column SDRAM */
-#define CFG_MAMR_9COL	((CFG_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
+#define CONFIG_SYS_MAMR_9COL	((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
 			 MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 |	\
 			 MAMR_RLFA_1X	 | MAMR_WLFA_1X	   | MAMR_TLFA_4X)
 
diff --git a/include/configs/RPXClassic.h b/include/configs/RPXClassic.h
index 706e2aadc..162ef09e0 100644
--- a/include/configs/RPXClassic.h
+++ b/include/configs/RPXClassic.h
@@ -50,7 +50,7 @@
 /* Define CONFIG_FEC_ENET to use Fast ethernet instead of ethernet on SCC1   */
 #define CONFIG_FEC_ENET
 #ifdef CONFIG_FEC_ENET
-#define CFG_DISCOVER_PHY        1
+#define CONFIG_SYS_DISCOVER_PHY        1
 #define CONFIG_MII              1
 #endif /* CONFIG_FEC_ENET */
 
@@ -84,7 +84,7 @@
 	"bootm"
 
 #define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
-#undef	CFG_LOADS_BAUD_CHANGE		/* don't allow baudrate change	*/
+#undef	CONFIG_SYS_LOADS_BAUD_CHANGE		/* don't allow baudrate change	*/
 
 #undef	CONFIG_WATCHDOG			/* watchdog disabled		*/
 
@@ -112,26 +112,26 @@
 /*
  * Miscellaneous configurable options
  */
-#define CFG_RESET_ADDRESS	0x80000000
-#define	CFG_LONGHELP			/* undef to save memory		*/
-#define	CFG_PROMPT	"=> "		/* Monitor Command Prompt	*/
+#define CONFIG_SYS_RESET_ADDRESS	0x80000000
+#define	CONFIG_SYS_LONGHELP			/* undef to save memory		*/
+#define	CONFIG_SYS_PROMPT	"=> "		/* Monitor Command Prompt	*/
 #if defined(CONFIG_CMD_KGDB)
-#define	CFG_CBSIZE	1024		/* Console I/O Buffer Size	*/
+#define	CONFIG_SYS_CBSIZE	1024		/* Console I/O Buffer Size	*/
 #else
-#define	CFG_CBSIZE	256		/* Console I/O Buffer Size	*/
+#define	CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size	*/
 #endif
-#define	CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define	CFG_MAXARGS	16		/* max number of command args	*/
-#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+#define	CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define	CONFIG_SYS_MAXARGS	16		/* max number of command args	*/
+#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
 
-#define CFG_MEMTEST_START	0x0040000	/* memtest works on	*/
-#define CFG_MEMTEST_END		0x00C0000	/* 4 ... 12 MB in DRAM	*/
+#define CONFIG_SYS_MEMTEST_START	0x0040000	/* memtest works on	*/
+#define CONFIG_SYS_MEMTEST_END		0x00C0000	/* 4 ... 12 MB in DRAM	*/
 
-#define	CFG_LOAD_ADDR		0x100000	/* default load address	*/
+#define	CONFIG_SYS_LOAD_ADDR		0x100000	/* default load address	*/
 
-#define	CFG_HZ		1000		/* decrementer freq: 1 ms ticks	*/
+#define	CONFIG_SYS_HZ		1000		/* decrementer freq: 1 ms ticks	*/
 
-#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
 
 /*
  * Low Level Configuration Settings
@@ -141,15 +141,15 @@
 /*-----------------------------------------------------------------------
  * Internal Memory Mapped Register
  */
-#define CFG_IMMR		0xFA200000
+#define CONFIG_SYS_IMMR		0xFA200000
 
 /*-----------------------------------------------------------------------------
  * I2C Configuration
  *-----------------------------------------------------------------------------
  */
 #define CONFIG_I2C              1
-#define CFG_I2C_SPEED           50000
-#define CFG_I2C_SLAVE           0x34
+#define CONFIG_SYS_I2C_SPEED           50000
+#define CONFIG_SYS_I2C_SLAVE           0x34
 
 
 /* enable I2C and select the hardware/software driver */
@@ -169,72 +169,72 @@
 #define I2C_DELAY	udelay(5)	/* 1/4 I2C clock duration */
 
 
-# define CFG_I2C_SPEED		50000
-# define CFG_I2C_SLAVE		0x34
-# define CFG_I2C_EEPROM_ADDR	0x50	/* EEPROM X24C16		*/
-# define CFG_I2C_EEPROM_ADDR_LEN 1	/* bytes of address		*/
+# define CONFIG_SYS_I2C_SPEED		50000
+# define CONFIG_SYS_I2C_SLAVE		0x34
+# define CONFIG_SYS_I2C_EEPROM_ADDR	0x50	/* EEPROM X24C16		*/
+# define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1	/* bytes of address		*/
 /* mask of address bits that overflow into the "EEPROM chip address"    */
-#define CFG_I2C_EEPROM_ADDR_OVERFLOW	0x07
+#define CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW	0x07
 
 /*-----------------------------------------------------------------------
  * Definitions for initial stack pointer and data area (in DPRAM)
  */
-#define CFG_INIT_RAM_ADDR	CFG_IMMR
-#define	CFG_INIT_RAM_END	0x3000	/* End of used area in DPRAM	*/
-#define	CFG_GBL_DATA_SIZE	64  /* size in bytes reserved for initial data */
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define	CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_IMMR
+#define	CONFIG_SYS_INIT_RAM_END	0x3000	/* End of used area in DPRAM	*/
+#define	CONFIG_SYS_GBL_DATA_SIZE	64  /* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define	CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
 /*-----------------------------------------------------------------------
  * Start addresses for the final memory configuration
  * (Set up by the startup code)
- * Please note that CFG_SDRAM_BASE _must_ start at 0
+ * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
  */
-#define	CFG_SDRAM_BASE		0x00000000
-#define CFG_FLASH_BASE	0xFF000000
+#define	CONFIG_SYS_SDRAM_BASE		0x00000000
+#define CONFIG_SYS_FLASH_BASE	0xFF000000
 
 #if defined(DEBUG) || defined (CONFIG_VIDEO_SED13806) || defined(CONFIG_CMD_IDE)
-#define	CFG_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor	*/
+#define	CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor	*/
 #else
-#define	CFG_MONITOR_LEN		(128 << 10)	/* Reserve 128 kB for Monitor	*/
+#define	CONFIG_SYS_MONITOR_LEN		(128 << 10)	/* Reserve 128 kB for Monitor	*/
 #endif
-#define CFG_MONITOR_BASE	0xFF000000
-/*%%% #define CFG_MONITOR_BASE	CFG_FLASH_BASE */
-#define	CFG_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/
+#define CONFIG_SYS_MONITOR_BASE	0xFF000000
+/*%%% #define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_FLASH_BASE */
+#define	CONFIG_SYS_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/
 
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define	CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux	*/
+#define	CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux	*/
 
 /*-----------------------------------------------------------------------
  * FLASH organization
  */
-#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
-#define CFG_MAX_FLASH_SECT	71	/* max number of sectors on one chip	*/
+#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
+#define CONFIG_SYS_MAX_FLASH_SECT	71	/* max number of sectors on one chip	*/
 
-#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
-#define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
+#define CONFIG_SYS_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
+#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
 
 #if 0
-#define	CFG_ENV_IS_IN_FLASH	1
-#define	CFG_ENV_OFFSET		0x20000	/*   Offset   of Environment Sector  */
-#define CFG_ENV_SECT_SIZE       0x8000
-#define	CFG_ENV_SIZE		0x8000	/* Total Size of Environment Sector  */
+#define	CONFIG_ENV_IS_IN_FLASH	1
+#define	CONFIG_ENV_OFFSET		0x20000	/*   Offset   of Environment Sector  */
+#define CONFIG_ENV_SECT_SIZE       0x8000
+#define	CONFIG_ENV_SIZE		0x8000	/* Total Size of Environment Sector  */
 #else
-#define CFG_ENV_IS_IN_NVRAM     1
-#define CFG_ENV_ADDR            0xfa000100
-#define CFG_ENV_SIZE            0x1000
+#define CONFIG_ENV_IS_IN_NVRAM     1
+#define CONFIG_ENV_ADDR            0xfa000100
+#define CONFIG_ENV_SIZE            0x1000
 #endif
 
 /*-----------------------------------------------------------------------
  * Cache Configuration
  */
-#define CFG_CACHELINE_SIZE	16	/* For all MPC8xx CPUs			*/
+#define CONFIG_SYS_CACHELINE_SIZE	16	/* For all MPC8xx CPUs			*/
 #if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT	4	/* log base 2 of the above value	*/
+#define CONFIG_SYS_CACHELINE_SHIFT	4	/* log base 2 of the above value	*/
 #endif
 
 /*-----------------------------------------------------------------------
@@ -243,7 +243,7 @@
  *-----------------------------------------------------------------------
  * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze
  */
-#define CFG_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
+#define CONFIG_SYS_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
 			 SYPCR_SWP)
 
 /*-----------------------------------------------------------------------
@@ -251,28 +251,28 @@
  *-----------------------------------------------------------------------
  * PCMCIA config., multi-function pin tri-state
  */
-#define CFG_SIUMCR	(SIUMCR_MLRC10)
+#define CONFIG_SYS_SIUMCR	(SIUMCR_MLRC10)
 
 /*-----------------------------------------------------------------------
  * TBSCR - Time Base Status and Control				11-26
  *-----------------------------------------------------------------------
  * Clear Reference Interrupt Status, Timebase freezing enabled
  */
-#define CFG_TBSCR	(TBSCR_REFA | TBSCR_REFB | TBSCR_TBF | TBSCR_TBE)
+#define CONFIG_SYS_TBSCR	(TBSCR_REFA | TBSCR_REFB | TBSCR_TBF | TBSCR_TBE)
 
 /*-----------------------------------------------------------------------
  * RTCSC - Real-Time Clock Status and Control Register		11-27
  *-----------------------------------------------------------------------
  */
-/*%%%#define CFG_RTCSC	(RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE) */
-#define CFG_RTCSC	(RTCSC_SEC |  RTCSC_ALR | RTCSC_RTE)
+/*%%%#define CONFIG_SYS_RTCSC	(RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE) */
+#define CONFIG_SYS_RTCSC	(RTCSC_SEC |  RTCSC_ALR | RTCSC_RTE)
 
 /*-----------------------------------------------------------------------
  * PISCR - Periodic Interrupt Status and Control		11-31
  *-----------------------------------------------------------------------
  * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
  */
-#define CFG_PISCR (PISCR_PS | PISCR_PITF | PISCR_PTE)
+#define CONFIG_SYS_PISCR (PISCR_PS | PISCR_PITF | PISCR_PTE)
 
 /*-----------------------------------------------------------------------
  * PLPRCR - PLL, Low-Power, and Reset Control Register		15-30
@@ -283,7 +283,7 @@
  * If this is a 80 MHz CPU, set PLL multiplication factor to 5 (5*16=80)!
  */
 /* up to 50 MHz we use a 1:1 clock */
-#define CFG_PLPRCR	( (4 << PLPRCR_MF_SHIFT) | PLPRCR_TEXPS | PLPRCR_SPLSS | PLPRCR_TMIST)
+#define CONFIG_SYS_PLPRCR	( (4 << PLPRCR_MF_SHIFT) | PLPRCR_TEXPS | PLPRCR_SPLSS | PLPRCR_TMIST)
 
 /*-----------------------------------------------------------------------
  * SCCR - System Clock and reset Control Register		15-27
@@ -293,21 +293,21 @@
  */
 #define SCCR_MASK	SCCR_EBDF00
 /* up to 50 MHz we use a 1:1 clock */
-#define CFG_SCCR	(SCCR_COM00 | SCCR_TBS)
+#define CONFIG_SYS_SCCR	(SCCR_COM00 | SCCR_TBS)
 
 /*-----------------------------------------------------------------------
  * PCMCIA stuff
  *-----------------------------------------------------------------------
  *
  */
-#define CFG_PCMCIA_MEM_ADDR	(0xE0000000)
-#define CFG_PCMCIA_MEM_SIZE	( 64 << 20 )
-#define CFG_PCMCIA_DMA_ADDR	(0xE4000000)
-#define CFG_PCMCIA_DMA_SIZE	( 64 << 20 )
-#define CFG_PCMCIA_ATTRB_ADDR	(0xE8000000)
-#define CFG_PCMCIA_ATTRB_SIZE	( 64 << 20 )
-#define CFG_PCMCIA_IO_ADDR	(0xEC000000)
-#define CFG_PCMCIA_IO_SIZE	( 64 << 20 )
+#define CONFIG_SYS_PCMCIA_MEM_ADDR	(0xE0000000)
+#define CONFIG_SYS_PCMCIA_MEM_SIZE	( 64 << 20 )
+#define CONFIG_SYS_PCMCIA_DMA_ADDR	(0xE4000000)
+#define CONFIG_SYS_PCMCIA_DMA_SIZE	( 64 << 20 )
+#define CONFIG_SYS_PCMCIA_ATTRB_ADDR	(0xE8000000)
+#define CONFIG_SYS_PCMCIA_ATTRB_SIZE	( 64 << 20 )
+#define CONFIG_SYS_PCMCIA_IO_ADDR	(0xEC000000)
+#define CONFIG_SYS_PCMCIA_IO_SIZE	( 64 << 20 )
 
 /*-----------------------------------------------------------------------
  * IDE/ATA stuff (Supports IDE harddisk on PCMCIA Adapter)
@@ -320,29 +320,29 @@
 #undef	CONFIG_IDE_LED			/* LED   for ide not supported	*/
 #undef	CONFIG_IDE_RESET		/* reset for ide not supported	*/
 
-#define CFG_IDE_MAXBUS		1	/* max. 1 IDE bus		*/
-#define CFG_IDE_MAXDEVICE	1	/* max. 1 drive per IDE bus	*/
+#define CONFIG_SYS_IDE_MAXBUS		1	/* max. 1 IDE bus		*/
+#define CONFIG_SYS_IDE_MAXDEVICE	1	/* max. 1 drive per IDE bus	*/
 
-#define CFG_ATA_IDE0_OFFSET	0x0000
+#define CONFIG_SYS_ATA_IDE0_OFFSET	0x0000
 
-#define CFG_ATA_BASE_ADDR	CFG_PCMCIA_MEM_ADDR
+#define CONFIG_SYS_ATA_BASE_ADDR	CONFIG_SYS_PCMCIA_MEM_ADDR
 
 /* Offset for data I/O			*/
-#define CFG_ATA_DATA_OFFSET	(CFG_PCMCIA_MEM_SIZE + 0x320)
+#define CONFIG_SYS_ATA_DATA_OFFSET	(CONFIG_SYS_PCMCIA_MEM_SIZE + 0x320)
 
 /* Offset for normal register accesses	*/
-#define CFG_ATA_REG_OFFSET	(2 * CFG_PCMCIA_MEM_SIZE + 0x320)
+#define CONFIG_SYS_ATA_REG_OFFSET	(2 * CONFIG_SYS_PCMCIA_MEM_SIZE + 0x320)
 
 /* Offset for alternate registers	*/
-#define CFG_ATA_ALT_OFFSET	0x0100
+#define CONFIG_SYS_ATA_ALT_OFFSET	0x0100
 
 /*-----------------------------------------------------------------------
  *
  *-----------------------------------------------------------------------
  *
  */
-/* #define	CFG_DER	0x2002000F */
-#define CFG_DER	0
+/* #define	CONFIG_SYS_DER	0x2002000F */
+#define CONFIG_SYS_DER	0
 
 /*
  * Init Memory Controller:
@@ -351,13 +351,13 @@
  */
 
 #define FLASH_BASE_PRELIM	0xFE000000	/* FLASH base */
-#define CFG_PRELIM_OR_AM	0xFE000000	/* OR addr mask */
+#define CONFIG_SYS_PRELIM_OR_AM	0xFE000000	/* OR addr mask */
 
 /* FLASH timing: ACS = 0, TRLX = 0, CSNT = 0, SCY = 4, ETHR = 0, BIH = 1 */
-#define CFG_OR_TIMING_FLASH (OR_SCY_4_CLK | OR_BI)
+#define CONFIG_SYS_OR_TIMING_FLASH (OR_SCY_4_CLK | OR_BI)
 
-#define CFG_OR0_PRELIM	(CFG_PRELIM_OR_AM | CFG_OR_TIMING_FLASH)
-#define CFG_BR0_PRELIM	((FLASH_BASE_PRELIM & BR_BA_MSK) | BR_V)
+#define CONFIG_SYS_OR0_PRELIM	(CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_FLASH)
+#define CONFIG_SYS_BR0_PRELIM	((FLASH_BASE_PRELIM & BR_BA_MSK) | BR_V)
 
 /*
  * BR1 and OR1 (SDRAM)
@@ -367,16 +367,16 @@
 #define	SDRAM_MAX_SIZE		0x01000000	/* max 16 MB */
 
 /* SDRAM timing: Multiplexed addresses, GPL5 output to GPL5_A (don't care)	*/
-#define CFG_OR_TIMING_SDRAM	0x00000E00
+#define CONFIG_SYS_OR_TIMING_SDRAM	0x00000E00
 
-#define CFG_OR1_PRELIM	(CFG_PRELIM_OR_AM | CFG_OR_TIMING_SDRAM )
-#define CFG_BR1_PRELIM	((SDRAM_BASE_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
+#define CONFIG_SYS_OR1_PRELIM	(CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_SDRAM )
+#define CONFIG_SYS_BR1_PRELIM	((SDRAM_BASE_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
 
 /* RPXLITE mem setting */
-#define	CFG_BR3_PRELIM	0xFA400001		/* BCSR */
-#define CFG_OR3_PRELIM	0xff7f8970
-#define	CFG_BR4_PRELIM	0xFA000401		/* NVRAM&SRAM */
-#define CFG_OR4_PRELIM	0xFFF80970
+#define	CONFIG_SYS_BR3_PRELIM	0xFA400001		/* BCSR */
+#define CONFIG_SYS_OR3_PRELIM	0xff7f8970
+#define	CONFIG_SYS_BR4_PRELIM	0xFA000401		/* NVRAM&SRAM */
+#define CONFIG_SYS_OR4_PRELIM	0xFFF80970
 
 /* ECCX CS settings                                                          */
 #define SED13806_OR             0xFFC00108     /* - 4 Mo
@@ -425,19 +425,19 @@
  */
 
 /* periodic timer for refresh */
-#define CFG_MAMR_PTA	58
+#define CONFIG_SYS_MAMR_PTA	58
 
 /*
  * Refresh clock Prescalar
  */
-#define CFG_MPTPR	MPTPR_PTP_DIV8
+#define CONFIG_SYS_MPTPR	MPTPR_PTP_DIV8
 
 /*
  * MAMR settings for SDRAM
  */
 
 /* 10 column SDRAM */
-#define CFG_MAMR_10COL	((CFG_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
+#define CONFIG_SYS_MAMR_10COL	((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
 			 MAMR_AMA_TYPE_2 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A12 |	\
 			 MAMR_GPL_A4DIS | MAMR_RLFA_4X | MAMR_WLFA_3X | MAMR_TLFA_16X)
 
diff --git a/include/configs/RPXlite.h b/include/configs/RPXlite.h
index 671094b69..dd9134da1 100644
--- a/include/configs/RPXlite.h
+++ b/include/configs/RPXlite.h
@@ -57,7 +57,7 @@
 	"bootm"
 
 #define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
-#undef	CFG_LOADS_BAUD_CHANGE		/* don't allow baudrate change	*/
+#undef	CONFIG_SYS_LOADS_BAUD_CHANGE		/* don't allow baudrate change	*/
 
 #define CONFIG_BZIP2		/* Include support for bzip2 compressed images  */
 #undef	CONFIG_WATCHDOG			/* watchdog disabled		*/
@@ -81,27 +81,27 @@
 /*
  * Miscellaneous configurable options
  */
-#define	CFG_LONGHELP			/* undef to save memory		*/
-#define	CFG_PROMPT	"=> "		/* Monitor Command Prompt	*/
+#define	CONFIG_SYS_LONGHELP			/* undef to save memory		*/
+#define	CONFIG_SYS_PROMPT	"=> "		/* Monitor Command Prompt	*/
 #if defined(CONFIG_CMD_KGDB)
-#define	CFG_CBSIZE	1024		/* Console I/O Buffer Size	*/
+#define	CONFIG_SYS_CBSIZE	1024		/* Console I/O Buffer Size	*/
 #else
-#define	CFG_CBSIZE	256		/* Console I/O Buffer Size	*/
+#define	CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size	*/
 #endif
-#define	CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define	CFG_MAXARGS	16		/* max number of command args	*/
-#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+#define	CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define	CONFIG_SYS_MAXARGS	16		/* max number of command args	*/
+#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
 
-#define CFG_MEMTEST_START	0x00400000	/* memtest works on	*/
-#define CFG_MEMTEST_END		0x00C00000	/* 4 ... 12 MB in DRAM	*/
+#define CONFIG_SYS_MEMTEST_START	0x00400000	/* memtest works on	*/
+#define CONFIG_SYS_MEMTEST_END		0x00C00000	/* 4 ... 12 MB in DRAM	*/
 
-#define CFG_RESET_ADDRESS	0x09900000
+#define CONFIG_SYS_RESET_ADDRESS	0x09900000
 
-#define	CFG_LOAD_ADDR		0x400000	/* default load address	*/
+#define	CONFIG_SYS_LOAD_ADDR		0x400000	/* default load address	*/
 
-#define	CFG_HZ			1000		/* decrementer freq: 1 ms ticks	*/
+#define	CONFIG_SYS_HZ			1000		/* decrementer freq: 1 ms ticks	*/
 
-#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
 
 /*
  * Low Level Configuration Settings
@@ -111,30 +111,30 @@
 /*-----------------------------------------------------------------------
  * Internal Memory Mapped Register
  */
-#define CFG_IMMR		0xFA200000
+#define CONFIG_SYS_IMMR		0xFA200000
 
 /*-----------------------------------------------------------------------
  * Definitions for initial stack pointer and data area (in DPRAM)
  */
-#define CFG_INIT_RAM_ADDR	CFG_IMMR
-#define	CFG_INIT_RAM_END	0x2F00	/* End of used area in DPRAM	*/
-#define	CFG_GBL_DATA_SIZE	64  /* size in bytes reserved for initial data */
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define	CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_IMMR
+#define	CONFIG_SYS_INIT_RAM_END	0x2F00	/* End of used area in DPRAM	*/
+#define	CONFIG_SYS_GBL_DATA_SIZE	64  /* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define	CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
 /*-----------------------------------------------------------------------
  * Start addresses for the final memory configuration
  * (Set up by the startup code)
- * Please note that CFG_SDRAM_BASE _must_ start at 0
+ * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
  */
-#define	CFG_SDRAM_BASE		0x00000000
-#define CFG_FLASH_BASE		0xFFC00000
-#define CFG_MONITOR_BASE	TEXT_BASE
-#define	CFG_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor	*/
+#define	CONFIG_SYS_SDRAM_BASE		0x00000000
+#define CONFIG_SYS_FLASH_BASE		0xFFC00000
+#define CONFIG_SYS_MONITOR_BASE	TEXT_BASE
+#define	CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor	*/
 #ifdef CONFIG_BZIP2
-#define CFG_MALLOC_LEN		(4096 << 10)	/* Reserve ~4 MB for malloc()   */
+#define CONFIG_SYS_MALLOC_LEN		(4096 << 10)	/* Reserve ~4 MB for malloc()   */
 #else
-#define CFG_MALLOC_LEN		(128 << 10)	/* Reserve 128 KB for malloc()  */
+#define CONFIG_SYS_MALLOC_LEN		(128 << 10)	/* Reserve 128 KB for malloc()  */
 #endif /* CONFIG_BZIP2 */
 
 /*
@@ -142,31 +142,31 @@
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define	CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux	*/
+#define	CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux	*/
 
 /*-----------------------------------------------------------------------
  * FLASH organization
  */
-#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
-#define CFG_MAX_FLASH_SECT	19	/* max number of sectors on one chip	*/
+#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
+#define CONFIG_SYS_MAX_FLASH_SECT	19	/* max number of sectors on one chip	*/
 
-#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
-#define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
+#define CONFIG_SYS_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
+#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
 
-#define	CFG_DIRECT_FLASH_TFTP
+#define	CONFIG_SYS_DIRECT_FLASH_TFTP
 
-#define	CFG_ENV_IS_IN_FLASH	1
-#define CFG_ENV_SECT_SIZE	0x40000	/* We use one complete sector		*/
-#define CFG_ENV_ADDR		(CFG_MONITOR_BASE + CFG_MONITOR_LEN)
+#define	CONFIG_ENV_IS_IN_FLASH	1
+#define CONFIG_ENV_SECT_SIZE	0x40000	/* We use one complete sector		*/
+#define CONFIG_ENV_ADDR		(CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)
 
 #define CONFIG_ENV_OVERWRITE
 
 /*-----------------------------------------------------------------------
  * Cache Configuration
  */
-#define CFG_CACHELINE_SIZE	16	/* For all MPC8xx CPUs			*/
+#define CONFIG_SYS_CACHELINE_SIZE	16	/* For all MPC8xx CPUs			*/
 #if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT	4	/* log base 2 of the above value	*/
+#define CONFIG_SYS_CACHELINE_SHIFT	4	/* log base 2 of the above value	*/
 #endif
 
 /*-----------------------------------------------------------------------
@@ -176,10 +176,10 @@
  * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze
  */
 #if defined(CONFIG_WATCHDOG)
-#define CFG_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
+#define CONFIG_SYS_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
 			 SYPCR_SWE  | SYPCR_SWRI| SYPCR_SWP)
 #else
-#define CFG_SYPCR	(SYPCR_SWTC | 0x00000600 | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
+#define CONFIG_SYS_SYPCR	(SYPCR_SWTC | 0x00000600 | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
 #endif
 
 /*-----------------------------------------------------------------------
@@ -187,28 +187,28 @@
  *-----------------------------------------------------------------------
  * PCMCIA config., multi-function pin tri-state
  */
-#define CFG_SIUMCR	(SIUMCR_MLRC10)
+#define CONFIG_SYS_SIUMCR	(SIUMCR_MLRC10)
 
 /*-----------------------------------------------------------------------
  * TBSCR - Time Base Status and Control				11-26
  *-----------------------------------------------------------------------
  * Clear Reference Interrupt Status, Timebase freezing enabled
  */
-#define CFG_TBSCR	(TBSCR_REFA | TBSCR_REFB | TBSCR_TBF | TBSCR_TBE)
+#define CONFIG_SYS_TBSCR	(TBSCR_REFA | TBSCR_REFB | TBSCR_TBF | TBSCR_TBE)
 
 /*-----------------------------------------------------------------------
  * RTCSC - Real-Time Clock Status and Control Register		11-27
  *-----------------------------------------------------------------------
  */
-/*%%%#define CFG_RTCSC	(RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE) */
-#define CFG_RTCSC	(RTCSC_SEC | RTCSC_RTE)
+/*%%%#define CONFIG_SYS_RTCSC	(RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE) */
+#define CONFIG_SYS_RTCSC	(RTCSC_SEC | RTCSC_RTE)
 
 /*-----------------------------------------------------------------------
  * PISCR - Periodic Interrupt Status and Control		11-31
  *-----------------------------------------------------------------------
  * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
  */
-#define CFG_PISCR (PISCR_PS | PISCR_PITF)
+#define CONFIG_SYS_PISCR (PISCR_PS | PISCR_PITF)
 
 /*-----------------------------------------------------------------------
  * PLPRCR - PLL, Low-Power, and Reset Control Register		15-30
@@ -219,7 +219,7 @@
  * If this is a 80 MHz CPU, set PLL multiplication factor to 5 (5*16=80)!
  */
 /* up to 50 MHz we use a 1:1 clock */
-#define CFG_PLPRCR	( (5 << PLPRCR_MF_SHIFT) | PLPRCR_TEXPS )
+#define CONFIG_SYS_PLPRCR	( (5 << PLPRCR_MF_SHIFT) | PLPRCR_TEXPS )
 
 /*-----------------------------------------------------------------------
  * SCCR - System Clock and reset Control Register		15-27
@@ -229,21 +229,21 @@
  */
 #define SCCR_MASK	SCCR_EBDF00
 /* up to 50 MHz we use a 1:1 clock */
-#define CFG_SCCR	(SCCR_COM11 | SCCR_TBS)
+#define CONFIG_SYS_SCCR	(SCCR_COM11 | SCCR_TBS)
 
 /*-----------------------------------------------------------------------
  * PCMCIA stuff
  *-----------------------------------------------------------------------
  *
  */
-#define CFG_PCMCIA_MEM_ADDR	(0xE0000000)
-#define CFG_PCMCIA_MEM_SIZE	( 64 << 20 )
-#define CFG_PCMCIA_DMA_ADDR	(0xE4000000)
-#define CFG_PCMCIA_DMA_SIZE	( 64 << 20 )
-#define CFG_PCMCIA_ATTRB_ADDR	(0xE8000000)
-#define CFG_PCMCIA_ATTRB_SIZE	( 64 << 20 )
-#define CFG_PCMCIA_IO_ADDR	(0xEC000000)
-#define CFG_PCMCIA_IO_SIZE	( 64 << 20 )
+#define CONFIG_SYS_PCMCIA_MEM_ADDR	(0xE0000000)
+#define CONFIG_SYS_PCMCIA_MEM_SIZE	( 64 << 20 )
+#define CONFIG_SYS_PCMCIA_DMA_ADDR	(0xE4000000)
+#define CONFIG_SYS_PCMCIA_DMA_SIZE	( 64 << 20 )
+#define CONFIG_SYS_PCMCIA_ATTRB_ADDR	(0xE8000000)
+#define CONFIG_SYS_PCMCIA_ATTRB_SIZE	( 64 << 20 )
+#define CONFIG_SYS_PCMCIA_IO_ADDR	(0xEC000000)
+#define CONFIG_SYS_PCMCIA_IO_SIZE	( 64 << 20 )
 
 /*-----------------------------------------------------------------------
  * IDE/ATA stuff (Supports IDE harddisk on PCMCIA Adapter)
@@ -256,29 +256,29 @@
 #undef	CONFIG_IDE_LED			/* LED   for ide not supported	*/
 #undef	CONFIG_IDE_RESET		/* reset for ide not supported	*/
 
-#define CFG_IDE_MAXBUS		1	/* max. 1 IDE bus		*/
-#define CFG_IDE_MAXDEVICE	1	/* max. 1 drive per IDE bus	*/
+#define CONFIG_SYS_IDE_MAXBUS		1	/* max. 1 IDE bus		*/
+#define CONFIG_SYS_IDE_MAXDEVICE	1	/* max. 1 drive per IDE bus	*/
 
-#define CFG_ATA_IDE0_OFFSET	0x0000
+#define CONFIG_SYS_ATA_IDE0_OFFSET	0x0000
 
-#define CFG_ATA_BASE_ADDR	CFG_PCMCIA_MEM_ADDR
+#define CONFIG_SYS_ATA_BASE_ADDR	CONFIG_SYS_PCMCIA_MEM_ADDR
 
 /* Offset for data I/O			*/
-#define CFG_ATA_DATA_OFFSET	(CFG_PCMCIA_MEM_SIZE + 0x320)
+#define CONFIG_SYS_ATA_DATA_OFFSET	(CONFIG_SYS_PCMCIA_MEM_SIZE + 0x320)
 
 /* Offset for normal register accesses	*/
-#define CFG_ATA_REG_OFFSET	(2 * CFG_PCMCIA_MEM_SIZE + 0x320)
+#define CONFIG_SYS_ATA_REG_OFFSET	(2 * CONFIG_SYS_PCMCIA_MEM_SIZE + 0x320)
 
 /* Offset for alternate registers	*/
-#define CFG_ATA_ALT_OFFSET	0x0100
+#define CONFIG_SYS_ATA_ALT_OFFSET	0x0100
 
 /*-----------------------------------------------------------------------
  *
  *-----------------------------------------------------------------------
  *
  */
-/*#define	CFG_DER	0x2002000F*/
-#define CFG_DER	0
+/*#define	CONFIG_SYS_DER	0x2002000F*/
+#define CONFIG_SYS_DER	0
 
 /*
  * Init Memory Controller:
@@ -287,13 +287,13 @@
  */
 
 #define FLASH_BASE_PRELIM	0xFE000000	/* FLASH base */
-#define CFG_PRELIM_OR_AM	0xFE000000	/* OR addr mask */
+#define CONFIG_SYS_PRELIM_OR_AM	0xFE000000	/* OR addr mask */
 
 /* FLASH timing: ACS = 0, TRLX = 0, CSNT = 0, SCY = 4, ETHR = 0, BIH = 1 */
-#define CFG_OR_TIMING_FLASH (OR_SCY_4_CLK | OR_BI)
+#define CONFIG_SYS_OR_TIMING_FLASH (OR_SCY_4_CLK | OR_BI)
 
-#define CFG_OR0_PRELIM	(CFG_PRELIM_OR_AM | CFG_OR_TIMING_FLASH)
-#define CFG_BR0_PRELIM	((FLASH_BASE_PRELIM & BR_BA_MSK) | BR_V)
+#define CONFIG_SYS_OR0_PRELIM	(CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_FLASH)
+#define CONFIG_SYS_BR0_PRELIM	((FLASH_BASE_PRELIM & BR_BA_MSK) | BR_V)
 
 /*
  * BR1 and OR1 (SDRAM)
@@ -303,35 +303,35 @@
 #define	SDRAM_MAX_SIZE		0x01000000	/* max 16 MB */
 
 /* SDRAM timing: Multiplexed addresses, GPL5 output to GPL5_A (don't care)	*/
-#define CFG_OR_TIMING_SDRAM	0x00000E00
+#define CONFIG_SYS_OR_TIMING_SDRAM	0x00000E00
 
-#define CFG_OR1_PRELIM	(CFG_PRELIM_OR_AM | CFG_OR_TIMING_SDRAM )
-#define CFG_BR1_PRELIM	((SDRAM_BASE_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
+#define CONFIG_SYS_OR1_PRELIM	(CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_SDRAM )
+#define CONFIG_SYS_BR1_PRELIM	((SDRAM_BASE_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
 
 /* RPXLITE mem setting */
-#define	CFG_BR3_PRELIM	0xFA400001		/* BCSR */
-#define CFG_OR3_PRELIM	0xFFFF8910
-#define	CFG_BR4_PRELIM	0xFA000401		/* NVRAM&SRAM */
-#define CFG_OR4_PRELIM	0xFFFE0970
+#define	CONFIG_SYS_BR3_PRELIM	0xFA400001		/* BCSR */
+#define CONFIG_SYS_OR3_PRELIM	0xFFFF8910
+#define	CONFIG_SYS_BR4_PRELIM	0xFA000401		/* NVRAM&SRAM */
+#define CONFIG_SYS_OR4_PRELIM	0xFFFE0970
 
 /*
  * Memory Periodic Timer Prescaler
  */
 
 /* periodic timer for refresh */
-#define CFG_MAMR_PTA	58
+#define CONFIG_SYS_MAMR_PTA	58
 
 /*
  * Refresh clock Prescalar
  */
-#define CFG_MPTPR	MPTPR_PTP_DIV8
+#define CONFIG_SYS_MPTPR	MPTPR_PTP_DIV8
 
 /*
  * MAMR settings for SDRAM
  */
 
 /* 10 column SDRAM */
-#define CFG_MAMR_10COL	((CFG_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
+#define CONFIG_SYS_MAMR_10COL	((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
 			 MAMR_AMA_TYPE_2 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A12 |	\
 			 MAMR_GPL_A4DIS | MAMR_RLFA_4X | MAMR_WLFA_3X | MAMR_TLFA_16X)
 
diff --git a/include/configs/RPXlite_DW.h b/include/configs/RPXlite_DW.h
index faae407da..a59053c0e 100644
--- a/include/configs/RPXlite_DW.h
+++ b/include/configs/RPXlite_DW.h
@@ -112,7 +112,7 @@
 #define CONFIG_BOOTCOMMAND	"run flash_self"
 
 #define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
-#undef	CFG_LOADS_BAUD_CHANGE		/* don't allow baudrate change	*/
+#undef	CONFIG_SYS_LOADS_BAUD_CHANGE		/* don't allow baudrate change	*/
 #undef	CONFIG_WATCHDOG			/* watchdog disabled		*/
 #undef	CONFIG_STATUS_LED		/* disturbs display. Status LED disabled. */
 
@@ -148,8 +148,8 @@
 
 
 /* test-only */
-#define CFG_JFFS2_FIRST_BANK	0	    /* use for JFFS2 */
-#define CFG_JFFS2_NUM_BANKS	1	    /* ! second bank contains U-Boot */
+#define CONFIG_SYS_JFFS2_FIRST_BANK	0	    /* use for JFFS2 */
+#define CONFIG_SYS_JFFS2_NUM_BANKS	1	    /* ! second bank contains U-Boot */
 
 #define CONFIG_NETCONSOLE
 
@@ -158,25 +158,25 @@
 /*
  * Miscellaneous configurable options
  */
-#define CFG_LONGHELP			/* undef to save memory		*/
-#define CFG_PROMPT	"u-boot>"	/* Monitor Command Prompt   */
+#define CONFIG_SYS_LONGHELP			/* undef to save memory		*/
+#define CONFIG_SYS_PROMPT	"u-boot>"	/* Monitor Command Prompt   */
 
 #if defined(CONFIG_CMD_KGDB)
-#define CFG_CBSIZE	1024		/* Console I/O Buffer Size	*/
+#define CONFIG_SYS_CBSIZE	1024		/* Console I/O Buffer Size	*/
 #else
-#define CFG_CBSIZE	256		/* Console I/O Buffer Size	*/
+#define CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size	*/
 #endif
 
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define CFG_MAXARGS	16		/* max number of command args	*/
-#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS	16		/* max number of command args	*/
+#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
 
-#define CFG_MEMTEST_START	0x0040000	/* memtest works on	*/
-#define CFG_MEMTEST_END		0x00C0000	/* 4 ... 12 MB in DRAM	*/
-#define CFG_LOAD_ADDR		0x100000	/* default load address */
+#define CONFIG_SYS_MEMTEST_START	0x0040000	/* memtest works on	*/
+#define CONFIG_SYS_MEMTEST_END		0x00C0000	/* 4 ... 12 MB in DRAM	*/
+#define CONFIG_SYS_LOAD_ADDR		0x100000	/* default load address */
 
-#define CFG_HZ		1000		/* decrementer freq: 1 ms ticks */
-#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+#define CONFIG_SYS_HZ		1000		/* decrementer freq: 1 ms ticks */
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
 
 /*
  * Low Level Configuration Settings
@@ -186,66 +186,66 @@
 /*-----------------------------------------------------------------------
  * Internal Memory Mapped Register
  */
-#define CFG_IMMR		0xFA200000
+#define CONFIG_SYS_IMMR		0xFA200000
 
 /*-----------------------------------------------------------------------
  * Definitions for initial stack pointer and data area (in DPRAM)
  */
-#define CFG_INIT_RAM_ADDR	CFG_IMMR
-#define CFG_INIT_RAM_END	0x2F00		/* End of used area in DPRAM	*/
-#define CFG_GBL_DATA_SIZE	64		/* size in bytes reserved for initial data */
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_IMMR
+#define CONFIG_SYS_INIT_RAM_END	0x2F00		/* End of used area in DPRAM	*/
+#define CONFIG_SYS_GBL_DATA_SIZE	64		/* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
 /*-----------------------------------------------------------------------
  * Start addresses for the final memory configuration
  * (Set up by the startup code)
- * Please note that CFG_SDRAM_BASE _must_ start at 0
+ * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
  */
-#define CFG_SDRAM_BASE		0x00000000
-#define CFG_FLASH_BASE		0xFF000000
+#define CONFIG_SYS_SDRAM_BASE		0x00000000
+#define CONFIG_SYS_FLASH_BASE		0xFF000000
 
 #if defined(DEBUG) || defined(CONFIG_CMD_IDE)
-#define CFG_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor	*/
+#define CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor	*/
 #else
-#define CFG_MONITOR_LEN		(128 << 10)	/* Reserve 128 kB for Monitor */
+#define CONFIG_SYS_MONITOR_LEN		(128 << 10)	/* Reserve 128 kB for Monitor */
 #endif
 
-#define CFG_MONITOR_BASE	0xFF000000
-#define CFG_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/
+#define CONFIG_SYS_MONITOR_BASE	0xFF000000
+#define CONFIG_SYS_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/
 
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
+#define CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
 
 /*-----------------------------------------------------------------------
  * FLASH organization
  */
-#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
-#define CFG_MAX_FLASH_SECT	71	/* max number of sectors on one chip	*/
-#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
-#define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
+#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
+#define CONFIG_SYS_MAX_FLASH_SECT	71	/* max number of sectors on one chip	*/
+#define CONFIG_SYS_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
+#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
 
-#ifdef	CFG_ENV_IS_IN_NVRAM
-#define CFG_ENV_ADDR		0xFA000100
-#define CFG_ENV_SIZE		0x1000
+#ifdef	CONFIG_ENV_IS_IN_NVRAM
+#define CONFIG_ENV_ADDR		0xFA000100
+#define CONFIG_ENV_SIZE		0x1000
 #else
-#define CFG_ENV_IS_IN_FLASH
-#define CFG_ENV_OFFSET		0x30000 /* Offset of Environment Sector		*/
-#define CFG_ENV_SIZE		0x8000	/* Total Size of Environment Sector	*/
-#endif	/* CFG_ENV_IS_IN_NVRAM */
+#define CONFIG_ENV_IS_IN_FLASH
+#define CONFIG_ENV_OFFSET		0x30000 /* Offset of Environment Sector		*/
+#define CONFIG_ENV_SIZE		0x8000	/* Total Size of Environment Sector	*/
+#endif	/* CONFIG_ENV_IS_IN_NVRAM */
 
-#define CFG_RESET_ADDRESS	((ulong)((((immap_t *)CFG_IMMR)->im_clkrst.res)))
+#define CONFIG_SYS_RESET_ADDRESS	((ulong)((((immap_t *)CONFIG_SYS_IMMR)->im_clkrst.res)))
 
 /*-----------------------------------------------------------------------
  * Cache Configuration
  */
-#define CFG_CACHELINE_SIZE	16	/* For all MPC8xx CPUs			*/
+#define CONFIG_SYS_CACHELINE_SIZE	16	/* For all MPC8xx CPUs			*/
 #if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT	4	/* log base 2 of the above value	*/
+#define CONFIG_SYS_CACHELINE_SHIFT	4	/* log base 2 of the above value	*/
 #endif
 
 /*-----------------------------------------------------------------------
@@ -255,10 +255,10 @@
  * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze
  */
 #if defined(CONFIG_WATCHDOG)
-#define CFG_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
+#define CONFIG_SYS_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
 			 SYPCR_SWE  | SYPCR_SWRI| SYPCR_SWP)
 #else
-#define CFG_SYPCR	(SYPCR_SWTC | 0x00000600 | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
+#define CONFIG_SYS_SYPCR	(SYPCR_SWTC | 0x00000600 | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
 #endif	/* We can get SYPCR: 0xFFFF0689. */
 
 /*-----------------------------------------------------------------------
@@ -266,14 +266,14 @@
  *-----------------------------------------------------------------------
  * PCMCIA config., multi-function pin tri-state
  */
-#define CFG_SIUMCR	(SIUMCR_MLRC10)	       /* SIUMCR:0x00000800 */
+#define CONFIG_SYS_SIUMCR	(SIUMCR_MLRC10)	       /* SIUMCR:0x00000800 */
 
 /*---------------------------------------------------------------------
  * TBSCR - Time Base Status and Control	 16-bit			 12-16
  *---------------------------------------------------------------------
  * Clear Reference Interrupt Status, Timebase freezing enabled
  */
-#define CFG_TBSCR	(TBSCR_REFA | TBSCR_REFB | TBSCR_TBF | TBSCR_TBE)
+#define CONFIG_SYS_TBSCR	(TBSCR_REFA | TBSCR_REFB | TBSCR_TBF | TBSCR_TBE)
 /* TBSCR: 0x00C3 [SAM] */
 
 /*-----------------------------------------------------------------------
@@ -281,7 +281,7 @@
  *-----------------------------------------------------------------------
  * [RTC enabled but not stopped on FRZ]
  */
-#define CFG_RTCSC    (RTCSC_SEC | RTCSC_ALR | RTCSC_RTE) /* RTCSC:0x00C1	*/
+#define CONFIG_SYS_RTCSC    (RTCSC_SEC | RTCSC_ALR | RTCSC_RTE) /* RTCSC:0x00C1	*/
 
 /*-----------------------------------------------------------------------
  * PISCR - Periodic Interrupt Status and Control 16-bit		 12-23
@@ -289,7 +289,7 @@
  * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
  * [Periodic timer enabled,Periodic timer interrupt disable. ]
  */
-#define CFG_PISCR (PISCR_PS | PISCR_PITF | PISCR_PTE)  /* PISCR:0x0083		*/
+#define CONFIG_SYS_PISCR (PISCR_PS | PISCR_PITF | PISCR_PTE)  /* PISCR:0x0083		*/
 
 /*-----------------------------------------------------------------------
  * PLPRCR - PLL, Low-Power, and Reset Control Register	32-bit	 5-7
@@ -299,9 +299,9 @@
  */
 /* up to 64 MHz we use a 1:2 clock */
 #if defined(RPXlite_64MHz)
-#define CFG_PLPRCR	( (7 << PLPRCR_MF_SHIFT) | PLPRCR_TEXPS )   /*PLPRCR: 0x00700000. */
+#define CONFIG_SYS_PLPRCR	( (7 << PLPRCR_MF_SHIFT) | PLPRCR_TEXPS )   /*PLPRCR: 0x00700000. */
 #else
-#define CFG_PLPRCR	( (5 << PLPRCR_MF_SHIFT) | PLPRCR_TEXPS )
+#define CONFIG_SYS_PLPRCR	( (5 << PLPRCR_MF_SHIFT) | PLPRCR_TEXPS )
 #endif
 
 /*-----------------------------------------------------------------------
@@ -313,23 +313,23 @@
 #define SCCR_MASK	SCCR_EBDF00
 /* Up to 48MHz system clock, we use 1:1 SYSTEM/BUS ratio */
 #if defined(RPXlite_64MHz)
-#define CFG_SCCR	( SCCR_TBS | SCCR_EBDF01 )  /* %%%SCCR:0x02020000 */
+#define CONFIG_SYS_SCCR	( SCCR_TBS | SCCR_EBDF01 )  /* %%%SCCR:0x02020000 */
 #else
-#define CFG_SCCR	( SCCR_TBS | SCCR_EBDF00 )  /* %%%SCCR:0x02000000 */
+#define CONFIG_SYS_SCCR	( SCCR_TBS | SCCR_EBDF00 )  /* %%%SCCR:0x02000000 */
 #endif
 
 /*-----------------------------------------------------------------------
  * PCMCIA stuff
  *-----------------------------------------------------------------------
  */
-#define CFG_PCMCIA_MEM_ADDR	(0xE0000000)
-#define CFG_PCMCIA_MEM_SIZE	( 64 << 20 )
-#define CFG_PCMCIA_DMA_ADDR	(0xE4000000)
-#define CFG_PCMCIA_DMA_SIZE	( 64 << 20 )
-#define CFG_PCMCIA_ATTRB_ADDR	(0xE8000000)
-#define CFG_PCMCIA_ATTRB_SIZE	( 64 << 20 )
-#define CFG_PCMCIA_IO_ADDR	(0xEC000000)
-#define CFG_PCMCIA_IO_SIZE	( 64 << 20 )
+#define CONFIG_SYS_PCMCIA_MEM_ADDR	(0xE0000000)
+#define CONFIG_SYS_PCMCIA_MEM_SIZE	( 64 << 20 )
+#define CONFIG_SYS_PCMCIA_DMA_ADDR	(0xE4000000)
+#define CONFIG_SYS_PCMCIA_DMA_SIZE	( 64 << 20 )
+#define CONFIG_SYS_PCMCIA_ATTRB_ADDR	(0xE8000000)
+#define CONFIG_SYS_PCMCIA_ATTRB_SIZE	( 64 << 20 )
+#define CONFIG_SYS_PCMCIA_IO_ADDR	(0xEC000000)
+#define CONFIG_SYS_PCMCIA_IO_SIZE	( 64 << 20 )
 
 /*-----------------------------------------------------------------------
  * IDE/ATA stuff (Supports IDE harddisk on PCMCIA Adapter)
@@ -341,22 +341,22 @@
 #undef	CONFIG_IDE_LED			/* LED	 for ide not supported	*/
 #undef	CONFIG_IDE_RESET		/* reset for ide not supported	*/
 
-#define CFG_IDE_MAXBUS		1	/* max. 1 IDE bus		*/
-#define CFG_IDE_MAXDEVICE	1	/* max. 1 drive per IDE bus	*/
+#define CONFIG_SYS_IDE_MAXBUS		1	/* max. 1 IDE bus		*/
+#define CONFIG_SYS_IDE_MAXDEVICE	1	/* max. 1 drive per IDE bus	*/
 
-#define CFG_ATA_IDE0_OFFSET	0x0000
-#define CFG_ATA_BASE_ADDR	CFG_PCMCIA_MEM_ADDR
+#define CONFIG_SYS_ATA_IDE0_OFFSET	0x0000
+#define CONFIG_SYS_ATA_BASE_ADDR	CONFIG_SYS_PCMCIA_MEM_ADDR
 
 /* Offset for data I/O			*/
-#define CFG_ATA_DATA_OFFSET	(CFG_PCMCIA_MEM_SIZE + 0x320)
+#define CONFIG_SYS_ATA_DATA_OFFSET	(CONFIG_SYS_PCMCIA_MEM_SIZE + 0x320)
 
 /* Offset for normal register accesses	*/
-#define CFG_ATA_REG_OFFSET	(2 * CFG_PCMCIA_MEM_SIZE + 0x320)
+#define CONFIG_SYS_ATA_REG_OFFSET	(2 * CONFIG_SYS_PCMCIA_MEM_SIZE + 0x320)
 
 /* Offset for alternate registers	*/
-#define CFG_ATA_ALT_OFFSET	0x0100
+#define CONFIG_SYS_ATA_ALT_OFFSET	0x0100
 
-#define		CFG_DER		0
+#define		CONFIG_SYS_DER		0
 
 /*
  * Init Memory Controller:
@@ -364,12 +364,12 @@
  * BR0 and OR0 (FLASH)
  */
 #define FLASH_BASE_PRELIM	0xFC000000	/* FLASH base	*/
-#define CFG_PRELIM_OR_AM	0xFC000000	/* OR addr mask */
+#define CONFIG_SYS_PRELIM_OR_AM	0xFC000000	/* OR addr mask */
 
 /* FLASH timing: ACS = 0, TRLX = 0, CSNT = 0, SCY = 8, ETHR = 0, BIH = 1 */
-#define CFG_OR_TIMING_FLASH (OR_SCY_8_CLK | OR_BI)
-#define CFG_OR0_PRELIM	(CFG_PRELIM_OR_AM | CFG_OR_TIMING_FLASH)
-#define CFG_BR0_PRELIM	((FLASH_BASE_PRELIM & BR_BA_MSK) | BR_V)
+#define CONFIG_SYS_OR_TIMING_FLASH (OR_SCY_8_CLK | OR_BI)
+#define CONFIG_SYS_OR0_PRELIM	(CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_FLASH)
+#define CONFIG_SYS_BR0_PRELIM	((FLASH_BASE_PRELIM & BR_BA_MSK) | BR_V)
 
 /*
  * BR1 and OR1 (SDRAM)
@@ -379,40 +379,40 @@
 #define SDRAM_MAX_SIZE		0x08000000	/* max 128 MB in system */
 
 /* SDRAM timing: Multiplexed addresses, GPL5 output to GPL5_A (don't care)	*/
-#define CFG_OR_TIMING_SDRAM	0x00000E00
-#define CFG_OR_AM_SDRAM		(-(SDRAM_MAX_SIZE & OR_AM_MSK))
-#define CFG_OR1_PRELIM	( CFG_OR_AM_SDRAM | CFG_OR_TIMING_SDRAM )
-#define CFG_BR1_PRELIM	((SDRAM_BASE_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
+#define CONFIG_SYS_OR_TIMING_SDRAM	0x00000E00
+#define CONFIG_SYS_OR_AM_SDRAM		(-(SDRAM_MAX_SIZE & OR_AM_MSK))
+#define CONFIG_SYS_OR1_PRELIM	( CONFIG_SYS_OR_AM_SDRAM | CONFIG_SYS_OR_TIMING_SDRAM )
+#define CONFIG_SYS_BR1_PRELIM	((SDRAM_BASE_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
 
 /* RPXlite mem setting */
-#define CFG_BR3_PRELIM	0xFA400001		/* BCSR */
-#define CFG_OR3_PRELIM	0xFF7F8900
-#define CFG_BR4_PRELIM	0xFA000401		/* NVRAM&SRAM */
-#define CFG_OR4_PRELIM	0xFFFE0040
+#define CONFIG_SYS_BR3_PRELIM	0xFA400001		/* BCSR */
+#define CONFIG_SYS_OR3_PRELIM	0xFF7F8900
+#define CONFIG_SYS_BR4_PRELIM	0xFA000401		/* NVRAM&SRAM */
+#define CONFIG_SYS_OR4_PRELIM	0xFFFE0040
 
 /*
  * Memory Periodic Timer Prescaler
  */
 /* periodic timer for refresh */
 #if defined(RPXlite_64MHz)
-#define CFG_MAMR_PTA	32
+#define CONFIG_SYS_MAMR_PTA	32
 #else
-#define CFG_MAMR_PTA	20
+#define CONFIG_SYS_MAMR_PTA	20
 #endif
 
 /*
  * Refresh clock Prescalar
  */
-#define CFG_MPTPR	MPTPR_PTP_DIV2
+#define CONFIG_SYS_MPTPR	MPTPR_PTP_DIV2
 
 /*
  * MAMR settings for SDRAM
  */
 
 /* 9 column SDRAM */
-#define CFG_MAMR_9COL  ((CFG_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE | \
+#define CONFIG_SYS_MAMR_9COL  ((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE | \
 			MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10)
-/* CFG_MAMR_9COL:0x20904000 @ 64MHz */
+/* CONFIG_SYS_MAMR_9COL:0x20904000 @ 64MHz */
 
 /*
  * Internal Definitions
diff --git a/include/configs/RPXsuper.h b/include/configs/RPXsuper.h
index dfadd2a11..e97ef9565 100644
--- a/include/configs/RPXsuper.h
+++ b/include/configs/RPXsuper.h
@@ -8,7 +8,7 @@
  *
  *****************************************************************************/
 /* for the AY-Revision which does not use the HRCW */
-#define CFG_DEFAULT_IMMR	0x00010000
+#define CONFIG_SYS_DEFAULT_IMMR	0x00010000
 
 /* What is the oscillator's (UX2) frequency in Hz? */
 #define CONFIG_8260_CLKIN  (66 * 1000 * 1000)
@@ -16,7 +16,7 @@
 /* How is switch S2 set? We really only want the MODCK[1-3] bits, so
  * only the 3 least significant bits are important.
 */
-#define CFG_SBC_S2  0x04
+#define CONFIG_SYS_SBC_S2  0x04
 
 /* What should MODCK_H be? It is dependent on the oscillator
  * frequency, MODCK[1-3], and desired CPM and core frequencies.
@@ -28,45 +28,45 @@
  * 0x5       0x5         66     133    133
  * 0x5       0x7         66     133    200
  */
-#define CFG_SBC_MODCK_H 0x06
+#define CONFIG_SYS_SBC_MODCK_H 0x06
 
-#define CFG_SBC_BOOT_LOW 1	/* only for HRCW */
-#undef CFG_SBC_BOOT_LOW
+#define CONFIG_SYS_SBC_BOOT_LOW 1	/* only for HRCW */
+#undef CONFIG_SYS_SBC_BOOT_LOW
 
 /* What should the base address of the main FLASH be and how big is
  * it (in MBytes)? This must contain TEXT_BASE from board/sbc8260/config.mk
  * The main FLASH is whichever is connected to *CS0. U-Boot expects
  * this to be the SIMM.
  */
-#define CFG_FLASH0_BASE 0x80000000
-#define CFG_FLASH0_SIZE 16
+#define CONFIG_SYS_FLASH0_BASE 0x80000000
+#define CONFIG_SYS_FLASH0_SIZE 16
 
 /* What should the base address of the secondary FLASH be and how big
  * is it (in Mbytes)? The secondary FLASH is whichever is connected
  * to *CS6. U-Boot expects this to be the on board FLASH. If you don't
  * want it enabled, don't define these constants.
  */
-#define CFG_FLASH1_BASE 0
-#define CFG_FLASH1_SIZE 0
-#undef CFG_FLASH1_BASE
-#undef CFG_FLASH1_SIZE
+#define CONFIG_SYS_FLASH1_BASE 0
+#define CONFIG_SYS_FLASH1_SIZE 0
+#undef CONFIG_SYS_FLASH1_BASE
+#undef CONFIG_SYS_FLASH1_SIZE
 
 /* What should be the base address of SDRAM DIMM and how big is
  * it (in Mbytes)?
 */
-#define CFG_SDRAM0_BASE 0x00000000
-#define CFG_SDRAM0_SIZE 64
+#define CONFIG_SYS_SDRAM0_BASE 0x00000000
+#define CONFIG_SYS_SDRAM0_SIZE 64
 
 /* What should be the base address of SDRAM DIMM and how big is
  * it (in Mbytes)?
 */
-#define CFG_SDRAM1_BASE 0x04000000
-#define CFG_SDRAM1_SIZE 32
+#define CONFIG_SYS_SDRAM1_BASE 0x04000000
+#define CONFIG_SYS_SDRAM1_SIZE 32
 
 /* What should be the base address of the LEDs and switch S0?
  * If you don't want them enabled, don't define this.
  */
-#define CFG_LED_BASE 0x00000000
+#define CONFIG_SYS_LED_BASE 0x00000000
 
 /*
  * select serial console configuration
@@ -106,19 +106,19 @@
  * - RAM for BD/Buffers is on the 60x Bus (see 28-13)
  * - Enable Half Duplex in FSMR
  */
-# define CFG_CMXFCR_MASK	(CMXFCR_FC3|CMXFCR_RF3CS_MSK|CMXFCR_TF3CS_MSK)
-# define CFG_CMXFCR_VALUE	(CMXFCR_RF3CS_CLK15|CMXFCR_TF3CS_CLK16)
-# define CFG_CPMFCR_RAMTYPE	0
-/*#define CFG_FCC_PSMR		(FCC_PSMR_FDE|FCC_PSMR_LPB) */
-# define CFG_FCC_PSMR		0
+# define CONFIG_SYS_CMXFCR_MASK	(CMXFCR_FC3|CMXFCR_RF3CS_MSK|CMXFCR_TF3CS_MSK)
+# define CONFIG_SYS_CMXFCR_VALUE	(CMXFCR_RF3CS_CLK15|CMXFCR_TF3CS_CLK16)
+# define CONFIG_SYS_CPMFCR_RAMTYPE	0
+/*#define CONFIG_SYS_FCC_PSMR		(FCC_PSMR_FDE|FCC_PSMR_LPB) */
+# define CONFIG_SYS_FCC_PSMR		0
 
 #else /* CONFIG_ETHER_INDEX */
 # error "on RPX Super ethernet must be FCC3"
 #endif /* CONFIG_ETHER_INDEX */
 
 #define CONFIG_HARD_I2C         1	/* I2C with hardware support	*/
-#define CFG_I2C_SPEED		400000	/* I2C speed and slave address	*/
-#define CFG_I2C_SLAVE		0x7F
+#define CONFIG_SYS_I2C_SPEED		400000	/* I2C speed and slave address	*/
+#define CONFIG_SYS_I2C_SLAVE		0x7F
 
 
 /* Define this to reserve an entire FLASH sector (256 KB) for
@@ -126,7 +126,7 @@
  * put in the same sector as U-Boot, and changing variables
  * will erase U-Boot temporarily
  */
-#define CFG_ENV_IN_OWN_SECT
+#define CONFIG_ENV_IN_OWN_SECT
 
 /* Define to allow the user to overwrite serial and ethaddr */
 #define CONFIG_ENV_OVERWRITE
@@ -144,10 +144,10 @@
 #define CONFIG_BOOTDELAY        -1
 
 /* undef this to save memory */
-#define CFG_LONGHELP
+#define CONFIG_SYS_LONGHELP
 
 /* Monitor Command Prompt       */
-#define CFG_PROMPT              "=> "
+#define CONFIG_SYS_PROMPT              "=> "
 
 
 /*
@@ -173,10 +173,10 @@
 
 
 /* Where do the internal registers live? */
-#define CFG_IMMR               0xF0000000
+#define CONFIG_SYS_IMMR               0xF0000000
 
 /* Where do the on board registers (CS4) live? */
-#define CFG_REGS_BASE          0xFA000000
+#define CONFIG_SYS_REGS_BASE          0xFA000000
 
 /*****************************************************************************
  *
@@ -194,28 +194,28 @@
  * Miscellaneous configurable options
  */
 #if defined(CONFIG_CMD_KGDB)
-#  define CFG_CBSIZE              1024       /* Console I/O Buffer Size      */
+#  define CONFIG_SYS_CBSIZE              1024       /* Console I/O Buffer Size      */
 #else
-#  define CFG_CBSIZE              256        /* Console I/O Buffer Size      */
+#  define CONFIG_SYS_CBSIZE              256        /* Console I/O Buffer Size      */
 #endif
 
 /* Print Buffer Size */
-#define CFG_PBSIZE        (CFG_CBSIZE + sizeof(CFG_PROMPT)+16)
+#define CONFIG_SYS_PBSIZE        (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT)+16)
 
-#define CFG_MAXARGS       8            /* max number of command args   */
+#define CONFIG_SYS_MAXARGS       8            /* max number of command args   */
 
-#define CFG_BARGSIZE      CFG_CBSIZE   /* Boot Argument Buffer Size    */
+#define CONFIG_SYS_BARGSIZE      CONFIG_SYS_CBSIZE   /* Boot Argument Buffer Size    */
 
-#define CFG_MEMTEST_START 0x04000000   /* memtest works on  */
-#define CFG_MEMTEST_END   0x06000000   /* 64-96 MB in SDRAM */
+#define CONFIG_SYS_MEMTEST_START 0x04000000   /* memtest works on  */
+#define CONFIG_SYS_MEMTEST_END   0x06000000   /* 64-96 MB in SDRAM */
 
 #define	CONFIG_CLOCKS_IN_MHZ	1	/* clocks passsed to Linux in MHz */
 
-#define CFG_LOAD_ADDR     0x100000     /* default load address */
-#define CFG_HZ            1000         /* decrementer freq: 1 ms ticks */
+#define CONFIG_SYS_LOAD_ADDR     0x100000     /* default load address */
+#define CONFIG_SYS_HZ            1000         /* decrementer freq: 1 ms ticks */
 
 /* valid baudrates */
-#define CFG_BAUDRATE_TABLE      { 9600, 19200, 38400, 57600, 115200 }
+#define CONFIG_SYS_BAUDRATE_TABLE      { 9600, 19200, 38400, 57600, 115200 }
 
 /*
  * Low Level Configuration Settings
@@ -223,106 +223,106 @@
  * You should know what you are doing if you make changes here.
  */
 
-#define CFG_FLASH_BASE    CFG_FLASH0_BASE
-#define CFG_SDRAM_BASE    CFG_SDRAM0_BASE
+#define CONFIG_SYS_FLASH_BASE    CONFIG_SYS_FLASH0_BASE
+#define CONFIG_SYS_SDRAM_BASE    CONFIG_SYS_SDRAM0_BASE
 
 /*-----------------------------------------------------------------------
  * Hard Reset Configuration Words
  */
-#if defined(CFG_SBC_BOOT_LOW)
-#  define  CFG_SBC_HRCW_BOOT_FLAGS  (HRCW_CIP | HRCW_BMS)
+#if defined(CONFIG_SYS_SBC_BOOT_LOW)
+#  define  CONFIG_SYS_SBC_HRCW_BOOT_FLAGS  (HRCW_CIP | HRCW_BMS)
 #else
-#  define  CFG_SBC_HRCW_BOOT_FLAGS  (0)
-#endif /* defined(CFG_SBC_BOOT_LOW) */
+#  define  CONFIG_SYS_SBC_HRCW_BOOT_FLAGS  (0)
+#endif /* defined(CONFIG_SYS_SBC_BOOT_LOW) */
 
-/* get the HRCW ISB field from CFG_IMMR */
-#define CFG_SBC_HRCW_IMMR ( ((CFG_IMMR & 0x10000000) >> 10) |\
-			    ((CFG_IMMR & 0x01000000) >> 7)  |\
-			    ((CFG_IMMR & 0x00100000) >> 4) )
+/* get the HRCW ISB field from CONFIG_SYS_IMMR */
+#define CONFIG_SYS_SBC_HRCW_IMMR ( ((CONFIG_SYS_IMMR & 0x10000000) >> 10) |\
+			    ((CONFIG_SYS_IMMR & 0x01000000) >> 7)  |\
+			    ((CONFIG_SYS_IMMR & 0x00100000) >> 4) )
 
-#define CFG_HRCW_MASTER (HRCW_BPS11                           |\
+#define CONFIG_SYS_HRCW_MASTER (HRCW_BPS11                           |\
 			 HRCW_DPPC11                          |\
-			 CFG_SBC_HRCW_IMMR                    |\
+			 CONFIG_SYS_SBC_HRCW_IMMR                    |\
 			 HRCW_MMR00                           |\
 			 HRCW_LBPC11                          |\
 			 HRCW_APPC10                          |\
 			 HRCW_CS10PC00                        |\
-			 (CFG_SBC_MODCK_H & HRCW_MODCK_H1111) |\
-			 CFG_SBC_HRCW_BOOT_FLAGS)
+			 (CONFIG_SYS_SBC_MODCK_H & HRCW_MODCK_H1111) |\
+			 CONFIG_SYS_SBC_HRCW_BOOT_FLAGS)
 
 /* no slaves */
-#define CFG_HRCW_SLAVE1 0
-#define CFG_HRCW_SLAVE2 0
-#define CFG_HRCW_SLAVE3 0
-#define CFG_HRCW_SLAVE4 0
-#define CFG_HRCW_SLAVE5 0
-#define CFG_HRCW_SLAVE6 0
-#define CFG_HRCW_SLAVE7 0
+#define CONFIG_SYS_HRCW_SLAVE1 0
+#define CONFIG_SYS_HRCW_SLAVE2 0
+#define CONFIG_SYS_HRCW_SLAVE3 0
+#define CONFIG_SYS_HRCW_SLAVE4 0
+#define CONFIG_SYS_HRCW_SLAVE5 0
+#define CONFIG_SYS_HRCW_SLAVE6 0
+#define CONFIG_SYS_HRCW_SLAVE7 0
 
 /*-----------------------------------------------------------------------
  * Definitions for initial stack pointer and data area (in DPRAM)
  */
-#define CFG_INIT_RAM_ADDR       CFG_IMMR
-#define CFG_INIT_RAM_END        0x4000  /* End of used area in DPRAM    */
-#define CFG_GBL_DATA_SIZE      128     /* bytes reserved for initial data */
-#define CFG_GBL_DATA_OFFSET    (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP_OFFSET      CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_INIT_RAM_ADDR       CONFIG_SYS_IMMR
+#define CONFIG_SYS_INIT_RAM_END        0x4000  /* End of used area in DPRAM    */
+#define CONFIG_SYS_GBL_DATA_SIZE      128     /* bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET    (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET      CONFIG_SYS_GBL_DATA_OFFSET
 
 /*-----------------------------------------------------------------------
  * Start addresses for the final memory configuration
  * (Set up by the startup code)
- * Please note that CFG_SDRAM_BASE _must_ start at 0
- * Note also that the logic that sets CFG_RAMBOOT is platform dependent.
+ * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
+ * Note also that the logic that sets CONFIG_SYS_RAMBOOT is platform dependent.
  */
-#define CFG_MONITOR_BASE        (CFG_FLASH0_BASE + 0x00F00000)
+#define CONFIG_SYS_MONITOR_BASE        (CONFIG_SYS_FLASH0_BASE + 0x00F00000)
 
-#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
-#  define CFG_RAMBOOT
+#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
+#  define CONFIG_SYS_RAMBOOT
 #endif
 
-#define CFG_MONITOR_LEN      (256 << 10)     /* Reserve 256 kB for Monitor   */
-#define CFG_MALLOC_LEN       (128 << 10)     /* Reserve 128 kB for malloc()  */
+#define CONFIG_SYS_MONITOR_LEN      (256 << 10)     /* Reserve 256 kB for Monitor   */
+#define CONFIG_SYS_MALLOC_LEN       (128 << 10)     /* Reserve 128 kB for malloc()  */
 
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define CFG_BOOTMAPSZ        (8 << 20)       /* Initial Memory map for Linux */
+#define CONFIG_SYS_BOOTMAPSZ        (8 << 20)       /* Initial Memory map for Linux */
 
 /*-----------------------------------------------------------------------
  * FLASH and environment organization
  */
-#define CFG_MAX_FLASH_BANKS   1       /* max number of memory banks         */
-#define CFG_MAX_FLASH_SECT    71      /* max number of sectors on one chip  */
+#define CONFIG_SYS_MAX_FLASH_BANKS   1       /* max number of memory banks         */
+#define CONFIG_SYS_MAX_FLASH_SECT    71      /* max number of sectors on one chip  */
 
-#define CFG_FLASH_ERASE_TOUT  8000    /* Timeout for Flash Erase (in ms)    */
-#define CFG_FLASH_WRITE_TOUT  1       /* Timeout for Flash Write (in ms)    */
+#define CONFIG_SYS_FLASH_ERASE_TOUT  8000    /* Timeout for Flash Erase (in ms)    */
+#define CONFIG_SYS_FLASH_WRITE_TOUT  1       /* Timeout for Flash Write (in ms)    */
 
-#ifndef CFG_RAMBOOT
-#  define CFG_ENV_IS_IN_FLASH  1
+#ifndef CONFIG_SYS_RAMBOOT
+#  define CONFIG_ENV_IS_IN_FLASH  1
 
-#  ifdef CFG_ENV_IN_OWN_SECT
-#    define CFG_ENV_ADDR       (CFG_MONITOR_BASE + 0x40000)
-#    define CFG_ENV_SECT_SIZE  0x40000
+#  ifdef CONFIG_ENV_IN_OWN_SECT
+#    define CONFIG_ENV_ADDR       (CONFIG_SYS_MONITOR_BASE + 0x40000)
+#    define CONFIG_ENV_SECT_SIZE  0x40000
 #  else
-#    define CFG_ENV_ADDR (CFG_FLASH_BASE + CFG_MONITOR_LEN - CFG_ENV_SECT_SIZE)
-#    define CFG_ENV_SIZE       0x1000  /* Total Size of Environment Sector */
-#    define CFG_ENV_SECT_SIZE  0x10000 /* see README - env sect real size */
-#  endif /* CFG_ENV_IN_OWN_SECT */
+#    define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + CONFIG_SYS_MONITOR_LEN - CONFIG_ENV_SECT_SIZE)
+#    define CONFIG_ENV_SIZE       0x1000  /* Total Size of Environment Sector */
+#    define CONFIG_ENV_SECT_SIZE  0x10000 /* see README - env sect real size */
+#  endif /* CONFIG_ENV_IN_OWN_SECT */
 #else
-#  define CFG_ENV_IS_IN_NVRAM  1
-#  define CFG_ENV_ADDR         (CFG_MONITOR_BASE - 0x1000)
-#  define CFG_ENV_SIZE         0x200
-#endif /* CFG_RAMBOOT */
+#  define CONFIG_ENV_IS_IN_NVRAM  1
+#  define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE - 0x1000)
+#  define CONFIG_ENV_SIZE         0x200
+#endif /* CONFIG_SYS_RAMBOOT */
 
 /*-----------------------------------------------------------------------
  * Cache Configuration
  */
-#define CFG_CACHELINE_SIZE      32      /* For MPC8260 CPU */
+#define CONFIG_SYS_CACHELINE_SIZE      32      /* For MPC8260 CPU */
 
 #if defined(CONFIG_CMD_KGDB)
-#  define CFG_CACHELINE_SHIFT     5     /* log base 2 of the above value */
+#  define CONFIG_SYS_CACHELINE_SHIFT     5     /* log base 2 of the above value */
 #endif
 
 /*-----------------------------------------------------------------------
@@ -335,30 +335,30 @@
  *
  * HID1 has only read-only information - nothing to set.
  */
-#define CFG_HID0_INIT   (/*HID0_ICE  |*/\
+#define CONFIG_SYS_HID0_INIT   (/*HID0_ICE  |*/\
 			 /*HID0_DCE  |*/\
 			 HID0_ICFI |\
 			 HID0_DCI  |\
 			 HID0_IFEM |\
 			 HID0_ABE)
 
-#define CFG_HID0_FINAL  (/*HID0_ICE  |*/\
+#define CONFIG_SYS_HID0_FINAL  (/*HID0_ICE  |*/\
 			 HID0_IFEM |\
 			 HID0_ABE  |\
 			 HID0_EMCP)
-#define CFG_HID2        0
+#define CONFIG_SYS_HID2        0
 
 /*-----------------------------------------------------------------------
  * RMR - Reset Mode Register
  *-----------------------------------------------------------------------
  */
-#define CFG_RMR         0
+#define CONFIG_SYS_RMR         0
 
 /*-----------------------------------------------------------------------
  * BCR - Bus Configuration                                       4-25
  *-----------------------------------------------------------------------
  */
-#define CFG_BCR         (BCR_EBM   |\
+#define CONFIG_SYS_BCR         (BCR_EBM   |\
 			 BCR_PLDP  |\
 			 BCR_EAV   |\
 			 BCR_NPQM0)
@@ -368,7 +368,7 @@
  *-----------------------------------------------------------------------
  */
 
-#define CFG_SIUMCR      (SIUMCR_L2CPC01 |\
+#define CONFIG_SYS_SIUMCR      (SIUMCR_L2CPC01 |\
 			 SIUMCR_APPC10  |\
 			 SIUMCR_CS10PC01)
 
@@ -379,7 +379,7 @@
  *-----------------------------------------------------------------------
  * Watchdog & Bus Monitor Timer max, 60x Bus Monitor enable
  */
-#define CFG_SYPCR       (SYPCR_SWTC |\
+#define CONFIG_SYS_SYPCR       (SYPCR_SWTC |\
 			 SYPCR_BMT  |\
 			 SYPCR_PBME |\
 			 SYPCR_LBME |\
@@ -392,7 +392,7 @@
  * Clear once per Second and Alarm Interrupt Status, Set 32KHz timersclk,
  * and enable Time Counter
  */
-#define CFG_TMCNTSC     (TMCNTSC_SEC |\
+#define CONFIG_SYS_TMCNTSC     (TMCNTSC_SEC |\
 			 TMCNTSC_ALR |\
 			 TMCNTSC_TCF |\
 			 TMCNTSC_TCE)
@@ -403,7 +403,7 @@
  * Clear Periodic Interrupt Status, Set 32KHz timersclk, and enable
  * Periodic timer
  */
-#define CFG_PISCR       (PISCR_PS  |\
+#define CONFIG_SYS_PISCR       (PISCR_PS  |\
 			 PISCR_PTF |\
 			 PISCR_PTE)
 
@@ -411,13 +411,13 @@
  * SCCR - System Clock Control                                   9-8
  *-----------------------------------------------------------------------
  */
-#define CFG_SCCR        (SCCR_DFBRG01)
+#define CONFIG_SYS_SCCR        (SCCR_DFBRG01)
 
 /*-----------------------------------------------------------------------
  * RCCR - RISC Controller Configuration                         13-7
  *-----------------------------------------------------------------------
  */
-#define CFG_RCCR        0
+#define CONFIG_SYS_RCCR        0
 
 /*
  * Init Memory Controller:
@@ -441,13 +441,13 @@
 /* Bank 0 - FLASH
  *
  */
-#define CFG_BR0_PRELIM  ((CFG_FLASH0_BASE & BRx_BA_MSK) |\
+#define CONFIG_SYS_BR0_PRELIM  ((CONFIG_SYS_FLASH0_BASE & BRx_BA_MSK) |\
 			 BRx_PS_64                      |\
 			 BRx_DECC_NONE                  |\
 			 BRx_MS_GPCM_P                  |\
 			 BRx_V)
 
-#define CFG_OR0_PRELIM  (MEG_TO_AM(CFG_FLASH0_SIZE)     |\
+#define CONFIG_SYS_OR0_PRELIM  (MEG_TO_AM(CONFIG_SYS_FLASH0_SIZE)     |\
 			 ORxG_CSNT                      |\
 			 ORxG_ACS_DIV1                  |\
 			 ORxG_SCY_6_CLK                 |\
@@ -456,48 +456,48 @@
 /* Bank 1 - SDRAM
  *
  */
-#define CFG_BR1_PRELIM  ((CFG_SDRAM0_BASE & BRx_BA_MSK) |\
+#define CONFIG_SYS_BR1_PRELIM  ((CONFIG_SYS_SDRAM0_BASE & BRx_BA_MSK) |\
 			 BRx_PS_64                      |\
 			 BRx_MS_SDRAM_P                 |\
 			 BRx_V)
 
-#define CFG_OR1_PRELIM  (MEG_TO_AM(CFG_SDRAM0_SIZE)     |\
+#define CONFIG_SYS_OR1_PRELIM  (MEG_TO_AM(CONFIG_SYS_SDRAM0_SIZE)     |\
 			 ORxS_BPD_4                     |\
 			 ORxS_ROWST_PBI0_A8             |\
 			 ORxS_NUMR_12                   |\
 			 ORxS_IBID)
 
-#define CFG_PSDMR       0x014DA412
-#define CFG_PSRT	0x79
+#define CONFIG_SYS_PSDMR       0x014DA412
+#define CONFIG_SYS_PSRT	0x79
 
 
 /* Bank 2 - SDRAM
  *
  */
-#define CFG_BR2_PRELIM  ((CFG_SDRAM1_BASE & BRx_BA_MSK) |\
+#define CONFIG_SYS_BR2_PRELIM  ((CONFIG_SYS_SDRAM1_BASE & BRx_BA_MSK) |\
 			 BRx_PS_32                      |\
 			 BRx_MS_SDRAM_L                 |\
 			 BRx_V)
 
-#define CFG_OR2_PRELIM  (MEG_TO_AM(CFG_SDRAM1_SIZE)     |\
+#define CONFIG_SYS_OR2_PRELIM  (MEG_TO_AM(CONFIG_SYS_SDRAM1_SIZE)     |\
 			 ORxS_BPD_4                     |\
 			 ORxS_ROWST_PBI0_A9             |\
 			 ORxS_NUMR_12)
 
-#define CFG_LSDMR       0x0169A512
-#define CFG_LSRT	0x79
+#define CONFIG_SYS_LSDMR       0x0169A512
+#define CONFIG_SYS_LSRT	0x79
 
-#define CFG_MPTPR	(0x0800 & MPTPR_PTP_MSK)
+#define CONFIG_SYS_MPTPR	(0x0800 & MPTPR_PTP_MSK)
 
 /* Bank 4 - On board registers
  *
  */
-#define CFG_BR4_PRELIM   ((CFG_REGS_BASE & BRx_BA_MSK)  |\
+#define CONFIG_SYS_BR4_PRELIM   ((CONFIG_SYS_REGS_BASE & BRx_BA_MSK)  |\
 			   BRx_PS_8                     |\
 			   BRx_MS_GPCM_P                |\
 			   BRx_V)
 
-#define CFG_OR4_PRELIM    (ORxG_AM_MSK                 |\
+#define CONFIG_SYS_OR4_PRELIM    (ORxG_AM_MSK                 |\
 			   ORxG_CSNT                   |\
 			   ORxG_ACS_DIV1               |\
 			   ORxG_SCY_5_CLK              |\
diff --git a/include/configs/RRvision.h b/include/configs/RRvision.h
index 6a7180193..6ec5be01c 100644
--- a/include/configs/RRvision.h
+++ b/include/configs/RRvision.h
@@ -84,7 +84,7 @@
 
 
 #define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
-#undef	CFG_LOADS_BAUD_CHANGE		/* don't allow baudrate change	*/
+#undef	CONFIG_SYS_LOADS_BAUD_CHANGE		/* don't allow baudrate change	*/
 
 #undef	CONFIG_WATCHDOG			/* watchdog disabled		*/
 
@@ -121,8 +121,8 @@
 #undef	CONFIG_HARD_I2C			/* I2C with hardware support	*/
 #define	CONFIG_SOFT_I2C			/* I2C bit-banged		*/
 
-# define CFG_I2C_SPEED		50000	/* 50 kHz is supposed to work	*/
-# define CFG_I2C_SLAVE		0xFE
+# define CONFIG_SYS_I2C_SPEED		50000	/* 50 kHz is supposed to work	*/
+# define CONFIG_SYS_I2C_SLAVE		0xFE
 
 #ifdef CONFIG_SOFT_I2C
 /*
@@ -160,25 +160,25 @@
 /*
  * Miscellaneous configurable options
  */
-#define	CFG_LONGHELP			/* undef to save memory		*/
-#define	CFG_PROMPT	"=> "		/* Monitor Command Prompt	*/
+#define	CONFIG_SYS_LONGHELP			/* undef to save memory		*/
+#define	CONFIG_SYS_PROMPT	"=> "		/* Monitor Command Prompt	*/
 #if defined(CONFIG_CMD_KGDB)
-#define	CFG_CBSIZE	1024		/* Console I/O Buffer Size	*/
+#define	CONFIG_SYS_CBSIZE	1024		/* Console I/O Buffer Size	*/
 #else
-#define	CFG_CBSIZE	256		/* Console I/O Buffer Size	*/
+#define	CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size	*/
 #endif
-#define	CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define	CFG_MAXARGS	16		/* max number of command args	*/
-#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+#define	CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define	CONFIG_SYS_MAXARGS	16		/* max number of command args	*/
+#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
 
-#define CFG_MEMTEST_START	0x0400000	/* memtest works on	*/
-#define CFG_MEMTEST_END		0x0C00000	/* 4 ... 12 MB in DRAM	*/
+#define CONFIG_SYS_MEMTEST_START	0x0400000	/* memtest works on	*/
+#define CONFIG_SYS_MEMTEST_END		0x0C00000	/* 4 ... 12 MB in DRAM	*/
 
-#define	CFG_LOAD_ADDR		0x100000	/* default load address	*/
+#define	CONFIG_SYS_LOAD_ADDR		0x100000	/* default load address	*/
 
-#define	CFG_HZ		1000		/* decrementer freq: 1 ms ticks	*/
+#define	CONFIG_SYS_HZ		1000		/* decrementer freq: 1 ms ticks	*/
 
-#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
 
 /*
  * Low Level Configuration Settings
@@ -188,61 +188,61 @@
 /*-----------------------------------------------------------------------
  * Internal Memory Mapped Register
  */
-#define CFG_IMMR		0xFFF00000
+#define CONFIG_SYS_IMMR		0xFFF00000
 
 /*-----------------------------------------------------------------------
  * Definitions for initial stack pointer and data area (in DPRAM)
  */
-#define CFG_INIT_RAM_ADDR	CFG_IMMR
-#define	CFG_INIT_RAM_END	0x2F00	/* End of used area in DPRAM	*/
-#define	CFG_GBL_DATA_SIZE	64  /* size in bytes reserved for initial data */
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define	CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_IMMR
+#define	CONFIG_SYS_INIT_RAM_END	0x2F00	/* End of used area in DPRAM	*/
+#define	CONFIG_SYS_GBL_DATA_SIZE	64  /* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define	CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
 /*-----------------------------------------------------------------------
  * Start addresses for the final memory configuration
  * (Set up by the startup code)
- * Please note that CFG_SDRAM_BASE _must_ start at 0
+ * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
  */
-#define	CFG_SDRAM_BASE		0x00000000
-#define CFG_FLASH_BASE		0x40000000
-#define	CFG_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor	*/
-#define CFG_MONITOR_BASE	CFG_FLASH_BASE
-#define	CFG_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/
+#define	CONFIG_SYS_SDRAM_BASE		0x00000000
+#define CONFIG_SYS_FLASH_BASE		0x40000000
+#define	CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor	*/
+#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_FLASH_BASE
+#define	CONFIG_SYS_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/
 
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define	CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux	*/
+#define	CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux	*/
 
 /*-----------------------------------------------------------------------
  * FLASH organization
  */
-#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
-#define CFG_MAX_FLASH_SECT	71	/* max number of sectors on one chip	*/
+#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
+#define CONFIG_SYS_MAX_FLASH_SECT	71	/* max number of sectors on one chip	*/
 
 /* timeout values are in ticks = ms */
-#define CFG_FLASH_ERASE_TOUT	(120*CFG_HZ)	/* Timeout for Flash Erase	*/
-#define CFG_FLASH_WRITE_TOUT	(1 * CFG_HZ)	/* Timeout for Flash Write	*/
+#define CONFIG_SYS_FLASH_ERASE_TOUT	(120*CONFIG_SYS_HZ)	/* Timeout for Flash Erase	*/
+#define CONFIG_SYS_FLASH_WRITE_TOUT	(1 * CONFIG_SYS_HZ)	/* Timeout for Flash Write	*/
 
-#define	CFG_ENV_IS_IN_FLASH	1
-#define	CFG_ENV_OFFSET		0x8000	/*   Offset   of Environment Sector	*/
-#define	CFG_ENV_SIZE		0x4000	/* Total Size of Environment Sector	*/
+#define	CONFIG_ENV_IS_IN_FLASH	1
+#define	CONFIG_ENV_OFFSET		0x8000	/*   Offset   of Environment Sector	*/
+#define	CONFIG_ENV_SIZE		0x4000	/* Total Size of Environment Sector	*/
 
 /* Address and size of Redundant Environment Sector	*/
-#define CFG_ENV_OFFSET_REDUND	(CFG_ENV_OFFSET+CFG_ENV_SIZE)
-#define CFG_ENV_SIZE_REDUND	(CFG_ENV_SIZE)
+#define CONFIG_ENV_OFFSET_REDUND	(CONFIG_ENV_OFFSET+CONFIG_ENV_SIZE)
+#define CONFIG_ENV_SIZE_REDUND	(CONFIG_ENV_SIZE)
 
-#define	CFG_USE_PPCENV			/* Environment embedded in sect .ppcenv */
+#define	CONFIG_SYS_USE_PPCENV			/* Environment embedded in sect .ppcenv */
 
 /*-----------------------------------------------------------------------
  * Cache Configuration
  */
-#define CFG_CACHELINE_SIZE	16	/* For all MPC8xx CPUs			*/
+#define CONFIG_SYS_CACHELINE_SIZE	16	/* For all MPC8xx CPUs			*/
 #if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT	4	/* log base 2 of the above value	*/
+#define CONFIG_SYS_CACHELINE_SHIFT	4	/* log base 2 of the above value	*/
 #endif
 
 /*-----------------------------------------------------------------------
@@ -252,10 +252,10 @@
  * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze
  */
 #if defined(CONFIG_WATCHDOG)
-#define CFG_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
+#define CONFIG_SYS_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
 			 SYPCR_SWE  | SYPCR_SWRI| SYPCR_SWP)
 #else
-#define CFG_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
+#define CONFIG_SYS_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
 #endif
 
 /*-----------------------------------------------------------------------
@@ -264,9 +264,9 @@
  * PCMCIA config., multi-function pin tri-state
  */
 #ifndef	CONFIG_CAN_DRIVER
-#define CFG_SIUMCR	(SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_MLRC01)
+#define CONFIG_SYS_SIUMCR	(SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_MLRC01)
 #else	/* we must activate GPL5 in the SIUMCR for CAN */
-#define CFG_SIUMCR	(SIUMCR_DBGC11 | SIUMCR_DBPC00 | SIUMCR_MLRC01)
+#define CONFIG_SYS_SIUMCR	(SIUMCR_DBGC11 | SIUMCR_DBPC00 | SIUMCR_MLRC01)
 #endif	/* CONFIG_CAN_DRIVER */
 
 /*-----------------------------------------------------------------------
@@ -274,20 +274,20 @@
  *-----------------------------------------------------------------------
  * Clear Reference Interrupt Status, Timebase freezing enabled
  */
-#define CFG_TBSCR	(TBSCR_REFA | TBSCR_REFB | TBSCR_TBF)
+#define CONFIG_SYS_TBSCR	(TBSCR_REFA | TBSCR_REFB | TBSCR_TBF)
 
 /*-----------------------------------------------------------------------
  * RTCSC - Real-Time Clock Status and Control Register		11-27
  *-----------------------------------------------------------------------
  */
-#define CFG_RTCSC	(RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE)
+#define CONFIG_SYS_RTCSC	(RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE)
 
 /*-----------------------------------------------------------------------
  * PISCR - Periodic Interrupt Status and Control		11-31
  *-----------------------------------------------------------------------
  * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
  */
-#define CFG_PISCR	(PISCR_PS | PISCR_PITF | PISCR_PTE)
+#define CONFIG_SYS_PISCR	(PISCR_PS | PISCR_PITF | PISCR_PTE)
 
 /*-----------------------------------------------------------------------
  * PLPRCR - PLL, Low-Power, and Reset Control Register		15-30
@@ -297,7 +297,7 @@
  */
 
 /* for 64 MHz, we use a 16 MHz clock * 4 */
-#define CFG_PLPRCR ( (4-1)<<PLPRCR_MF_SHIFT | PLPRCR_TEXPS | PLPRCR_TMIST )
+#define CONFIG_SYS_PLPRCR ( (4-1)<<PLPRCR_MF_SHIFT | PLPRCR_TEXPS | PLPRCR_TMIST )
 
 /*-----------------------------------------------------------------------
  * SCCR - System Clock and reset Control Register		15-27
@@ -306,7 +306,7 @@
  * power management and some other internal clocks
  */
 #define SCCR_MASK	SCCR_EBDF11
-#define CFG_SCCR	(/* SCCR_TBS  | */ SCCR_RTSEL | SCCR_RTDIV    | \
+#define CONFIG_SYS_SCCR	(/* SCCR_TBS  | */ SCCR_RTSEL | SCCR_RTDIV    | \
 			 SCCR_COM00   | SCCR_DFSYNC00 | SCCR_DFBRG00  | \
 			 SCCR_DFNL000 | SCCR_DFNH000  | SCCR_DFLCD000 | \
 			 SCCR_DFALCD00)
@@ -316,14 +316,14 @@
  *-----------------------------------------------------------------------
  *
  */
-#define CFG_PCMCIA_MEM_ADDR	(0xE0000000)
-#define CFG_PCMCIA_MEM_SIZE	( 64 << 20 )
-#define CFG_PCMCIA_DMA_ADDR	(0xE4000000)
-#define CFG_PCMCIA_DMA_SIZE	( 64 << 20 )
-#define CFG_PCMCIA_ATTRB_ADDR	(0xE8000000)
-#define CFG_PCMCIA_ATTRB_SIZE	( 64 << 20 )
-#define CFG_PCMCIA_IO_ADDR	(0xEC000000)
-#define CFG_PCMCIA_IO_SIZE	( 64 << 20 )
+#define CONFIG_SYS_PCMCIA_MEM_ADDR	(0xE0000000)
+#define CONFIG_SYS_PCMCIA_MEM_SIZE	( 64 << 20 )
+#define CONFIG_SYS_PCMCIA_DMA_ADDR	(0xE4000000)
+#define CONFIG_SYS_PCMCIA_DMA_SIZE	( 64 << 20 )
+#define CONFIG_SYS_PCMCIA_ATTRB_ADDR	(0xE8000000)
+#define CONFIG_SYS_PCMCIA_ATTRB_SIZE	( 64 << 20 )
+#define CONFIG_SYS_PCMCIA_IO_ADDR	(0xEC000000)
+#define CONFIG_SYS_PCMCIA_IO_SIZE	( 64 << 20 )
 
 /*-----------------------------------------------------------------------
  * IDE/ATA stuff (Supports IDE harddisk on PCMCIA Adapter)
@@ -336,29 +336,29 @@
 #undef	CONFIG_IDE_LED			/* LED   for ide not supported	*/
 #undef	CONFIG_IDE_RESET		/* reset for ide not supported	*/
 
-#define CFG_IDE_MAXBUS		1	/* max. 1 IDE bus		*/
-#define CFG_IDE_MAXDEVICE	1	/* max. 1 drive per IDE bus	*/
+#define CONFIG_SYS_IDE_MAXBUS		1	/* max. 1 IDE bus		*/
+#define CONFIG_SYS_IDE_MAXDEVICE	1	/* max. 1 drive per IDE bus	*/
 
-#define CFG_ATA_IDE0_OFFSET	0x0000
+#define CONFIG_SYS_ATA_IDE0_OFFSET	0x0000
 
-#define CFG_ATA_BASE_ADDR	CFG_PCMCIA_MEM_ADDR
+#define CONFIG_SYS_ATA_BASE_ADDR	CONFIG_SYS_PCMCIA_MEM_ADDR
 
 /* Offset for data I/O			*/
-#define CFG_ATA_DATA_OFFSET	(CFG_PCMCIA_MEM_SIZE + 0x320)
+#define CONFIG_SYS_ATA_DATA_OFFSET	(CONFIG_SYS_PCMCIA_MEM_SIZE + 0x320)
 
 /* Offset for normal register accesses	*/
-#define CFG_ATA_REG_OFFSET	(2 * CFG_PCMCIA_MEM_SIZE + 0x320)
+#define CONFIG_SYS_ATA_REG_OFFSET	(2 * CONFIG_SYS_PCMCIA_MEM_SIZE + 0x320)
 
 /* Offset for alternate registers	*/
-#define CFG_ATA_ALT_OFFSET	0x0100
+#define CONFIG_SYS_ATA_ALT_OFFSET	0x0100
 
 /*-----------------------------------------------------------------------
  *
  *-----------------------------------------------------------------------
  *
  */
-/*#define	CFG_DER	0x2002000F*/
-#define CFG_DER	0
+/*#define	CONFIG_SYS_DER	0x2002000F*/
+#define CONFIG_SYS_DER	0
 
 /*
  * Init Memory Controller:
@@ -372,19 +372,19 @@
  * restrict access enough to keep SRAM working (if any)
  * but not too much to meddle with FLASH accesses
  */
-#define CFG_REMAP_OR_AM		0x80000000	/* OR addr mask */
-#define CFG_PRELIM_OR_AM	0xE0000000	/* OR addr mask */
+#define CONFIG_SYS_REMAP_OR_AM		0x80000000	/* OR addr mask */
+#define CONFIG_SYS_PRELIM_OR_AM	0xE0000000	/* OR addr mask */
 
 /*
  * FLASH timing:
  */
 /* 66 MHz CPU - 66 MHz bus: ACS = 00, TRLX = 1, CSNT = 1, SCY = 3, EHTR = 1 */
-#define CFG_OR_TIMING_FLASH	(OR_ACS_DIV1  | OR_TRLX | OR_CSNT_SAM | \
+#define CONFIG_SYS_OR_TIMING_FLASH	(OR_ACS_DIV1  | OR_TRLX | OR_CSNT_SAM | \
 				 OR_SCY_3_CLK | OR_EHTR | OR_BI)
 
-#define CFG_OR0_REMAP	(CFG_REMAP_OR_AM  | CFG_OR_TIMING_FLASH)
-#define CFG_OR0_PRELIM	(CFG_PRELIM_OR_AM | CFG_OR_TIMING_FLASH)
-#define CFG_BR0_PRELIM	((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_V )
+#define CONFIG_SYS_OR0_REMAP	(CONFIG_SYS_REMAP_OR_AM  | CONFIG_SYS_OR_TIMING_FLASH)
+#define CONFIG_SYS_OR0_PRELIM	(CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_FLASH)
+#define CONFIG_SYS_BR0_PRELIM	((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_V )
 
 /*
  * BR2/3 and OR2/3 (SDRAM)
@@ -395,19 +395,19 @@
 #define	SDRAM_MAX_SIZE		0x04000000	/* max 64 MB per bank	*/
 
 /* SDRAM timing: Multiplexed addresses, GPL5 output to GPL5_A (don't care)	*/
-#define CFG_OR_TIMING_SDRAM	0x00000A00
+#define CONFIG_SYS_OR_TIMING_SDRAM	0x00000A00
 
-#define CFG_OR2_PRELIM	(CFG_PRELIM_OR_AM | CFG_OR_TIMING_SDRAM )
-#define CFG_BR2_PRELIM	((SDRAM_BASE2_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
+#define CONFIG_SYS_OR2_PRELIM	(CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_SDRAM )
+#define CONFIG_SYS_BR2_PRELIM	((SDRAM_BASE2_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
 
 #ifndef	CONFIG_CAN_DRIVER
-#define	CFG_OR3_PRELIM	CFG_OR2_PRELIM
-#define CFG_BR3_PRELIM	((SDRAM_BASE3_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
+#define	CONFIG_SYS_OR3_PRELIM	CONFIG_SYS_OR2_PRELIM
+#define CONFIG_SYS_BR3_PRELIM	((SDRAM_BASE3_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
 #else	/* CAN uses CS3#, so we can have only one SDRAM bank anyway */
-#define	CFG_CAN_BASE		0xC0000000	/* CAN mapped at 0xC0000000	*/
-#define CFG_CAN_OR_AM		0xFFFF8000	/* 32 kB address mask		*/
-#define CFG_OR3_CAN		(CFG_CAN_OR_AM | OR_G5LA | OR_BI)
-#define CFG_BR3_CAN		((CFG_CAN_BASE & BR_BA_MSK) | \
+#define	CONFIG_SYS_CAN_BASE		0xC0000000	/* CAN mapped at 0xC0000000	*/
+#define CONFIG_SYS_CAN_OR_AM		0xFFFF8000	/* 32 kB address mask		*/
+#define CONFIG_SYS_OR3_CAN		(CONFIG_SYS_CAN_OR_AM | OR_G5LA | OR_BI)
+#define CONFIG_SYS_BR3_CAN		((CONFIG_SYS_CAN_BASE & BR_BA_MSK) | \
 					BR_PS_8 | BR_MS_UPMB | BR_V )
 #endif	/* CONFIG_CAN_DRIVER */
 
@@ -437,33 +437,33 @@
  * 66 Mhz => 66.000.000 / Divider = 129
  * 80 Mhz => 80.000.000 / Divider = 156
  */
-#define CFG_MAMR_PTA		129
+#define CONFIG_SYS_MAMR_PTA		129
 
 /*
  * For 16 MBit, refresh rates could be 31.3 us
  * (= 64 ms / 2K = 125 / quad bursts).
  * For a simpler initialization, 15.6 us is used instead.
  *
- * #define CFG_MPTPR_2BK_2K	MPTPR_PTP_DIV32		for 2 banks
- * #define CFG_MPTPR_1BK_2K	MPTPR_PTP_DIV64		for 1 bank
+ * #define CONFIG_SYS_MPTPR_2BK_2K	MPTPR_PTP_DIV32		for 2 banks
+ * #define CONFIG_SYS_MPTPR_1BK_2K	MPTPR_PTP_DIV64		for 1 bank
  */
-#define CFG_MPTPR_2BK_4K	MPTPR_PTP_DIV16		/* setting for 2 banks	*/
-#define CFG_MPTPR_1BK_4K	MPTPR_PTP_DIV32		/* setting for 1 bank	*/
+#define CONFIG_SYS_MPTPR_2BK_4K	MPTPR_PTP_DIV16		/* setting for 2 banks	*/
+#define CONFIG_SYS_MPTPR_1BK_4K	MPTPR_PTP_DIV32		/* setting for 1 bank	*/
 
 /* refresh rate 7.8 us (= 64 ms / 8K = 31.2 / quad bursts) for 256 MBit		*/
-#define CFG_MPTPR_2BK_8K	MPTPR_PTP_DIV8		/* setting for 2 banks	*/
-#define CFG_MPTPR_1BK_8K	MPTPR_PTP_DIV16		/* setting for 1 bank	*/
+#define CONFIG_SYS_MPTPR_2BK_8K	MPTPR_PTP_DIV8		/* setting for 2 banks	*/
+#define CONFIG_SYS_MPTPR_1BK_8K	MPTPR_PTP_DIV16		/* setting for 1 bank	*/
 
 /*
  * MAMR settings for SDRAM
  */
 
 /* 8 column SDRAM */
-#define CFG_MAMR_8COL	((CFG_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
+#define CONFIG_SYS_MAMR_8COL	((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
 			 MAMR_AMA_TYPE_0 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A11 |	\
 			 MAMR_RLFA_1X	 | MAMR_WLFA_1X	   | MAMR_TLFA_4X)
 /* 9 column SDRAM */
-#define CFG_MAMR_9COL	((CFG_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
+#define CONFIG_SYS_MAMR_9COL	((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
 			 MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 |	\
 			 MAMR_RLFA_1X	 | MAMR_WLFA_1X	   | MAMR_TLFA_4X)
 
diff --git a/include/configs/Rattler.h b/include/configs/Rattler.h
index e8ed0951c..01d0d5fc3 100644
--- a/include/configs/Rattler.h
+++ b/include/configs/Rattler.h
@@ -78,10 +78,10 @@
  * - BDs/buffers on 60x bus
  * - Full duplex
  */
-#define CFG_CMXFCR_MASK	(CMXFCR_FC1 | CMXFCR_RF1CS_MSK | CMXFCR_TF1CS_MSK)
-#define CFG_CMXFCR_VALUE	(CMXFCR_RF1CS_CLK11 | CMXFCR_TF1CS_CLK10)
-#define CFG_CPMFCR_RAMTYPE	0
-#define CFG_FCC_PSMR		(FCC_PSMR_FDE | FCC_PSMR_LPB)
+#define CONFIG_SYS_CMXFCR_MASK	(CMXFCR_FC1 | CMXFCR_RF1CS_MSK | CMXFCR_TF1CS_MSK)
+#define CONFIG_SYS_CMXFCR_VALUE	(CMXFCR_RF1CS_CLK11 | CMXFCR_TF1CS_CLK10)
+#define CONFIG_SYS_CPMFCR_RAMTYPE	0
+#define CONFIG_SYS_FCC_PSMR		(FCC_PSMR_FDE | FCC_PSMR_LPB)
 
 #elif (CONFIG_ETHER_INDEX == 2)
 
@@ -90,10 +90,10 @@
  * - BDs/buffers on 60x bus
  * - Full duplex
  */
-#define CFG_CMXFCR_MASK	(CMXFCR_FC2 | CMXFCR_RF2CS_MSK | CMXFCR_TF2CS_MSK)
-#define CFG_CMXFCR_VALUE	(CMXFCR_RF2CS_CLK15 | CMXFCR_TF2CS_CLK14)
-#define CFG_CPMFCR_RAMTYPE	0
-#define CFG_FCC_PSMR		(FCC_PSMR_FDE | FCC_PSMR_LPB)
+#define CONFIG_SYS_CMXFCR_MASK	(CMXFCR_FC2 | CMXFCR_RF2CS_MSK | CMXFCR_TF2CS_MSK)
+#define CONFIG_SYS_CMXFCR_VALUE	(CMXFCR_RF2CS_CLK15 | CMXFCR_TF2CS_CLK14)
+#define CONFIG_SYS_CPMFCR_RAMTYPE	0
+#define CONFIG_SYS_FCC_PSMR		(FCC_PSMR_FDE | FCC_PSMR_LPB)
 
 #endif /* CONFIG_ETHER_INDEX */
 
@@ -163,39 +163,39 @@
 /*
  * Miscellaneous configurable options
  */
-#define CFG_HUSH_PARSER
-#define CFG_PROMPT_HUSH_PS2	"> "
-#define CFG_LONGHELP			/* undef to save memory	    */
-#define CFG_PROMPT		"=> "	/* Monitor Command Prompt   */
+#define CONFIG_SYS_HUSH_PARSER
+#define CONFIG_SYS_PROMPT_HUSH_PS2	"> "
+#define CONFIG_SYS_LONGHELP			/* undef to save memory	    */
+#define CONFIG_SYS_PROMPT		"=> "	/* Monitor Command Prompt   */
 #if defined(CONFIG_CMD_KGDB)
-#define CFG_CBSIZE		1024	/* Console I/O Buffer Size  */
+#define CONFIG_SYS_CBSIZE		1024	/* Console I/O Buffer Size  */
 #else
-#define CFG_CBSIZE		256	/* Console I/O Buffer Size  */
+#define CONFIG_SYS_CBSIZE		256	/* Console I/O Buffer Size  */
 #endif
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16)	/* Print Buffer Size  */
-#define CFG_MAXARGS		16		/* max number of command args */
-#define CFG_BARGSIZE		CFG_CBSIZE	/* Boot Argument Buffer Size  */
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)	/* Print Buffer Size  */
+#define CONFIG_SYS_MAXARGS		16		/* max number of command args */
+#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size  */
 
-#define CFG_MEMTEST_START	0x00100000	/* memtest works on */
-#define CFG_MEMTEST_END		0x00f00000	/* 1 ... 15 MB in DRAM	*/
+#define CONFIG_SYS_MEMTEST_START	0x00100000	/* memtest works on */
+#define CONFIG_SYS_MEMTEST_END		0x00f00000	/* 1 ... 15 MB in DRAM	*/
 
-#define CFG_LOAD_ADDR		0x100000	/* default load address */
+#define CONFIG_SYS_LOAD_ADDR		0x100000	/* default load address */
 
-#define CFG_HZ			1000	/* decrementer freq: 1 ms ticks */
+#define CONFIG_SYS_HZ			1000	/* decrementer freq: 1 ms ticks */
 
-#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
 
-#define CFG_FLASH_BASE		0xFE000000
-#define CFG_FLASH_CFI
+#define CONFIG_SYS_FLASH_BASE		0xFE000000
+#define CONFIG_SYS_FLASH_CFI
 #define CONFIG_FLASH_CFI_DRIVER
-#define CFG_MAX_FLASH_BANKS	1	/* max num of flash banks	*/
-#define CFG_MAX_FLASH_SECT	256	/* max num of sects on one chip */
+#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max num of flash banks	*/
+#define CONFIG_SYS_MAX_FLASH_SECT	256	/* max num of sects on one chip */
 
-#define	CFG_DIRECT_FLASH_TFTP
+#define	CONFIG_SYS_DIRECT_FLASH_TFTP
 
 #if defined(CONFIG_CMD_JFFS2)
-#define CFG_JFFS2_NUM_BANKS	CFG_MAX_FLASH_BANKS
-#define CFG_JFFS2_SORT_FRAGMENTS
+#define CONFIG_SYS_JFFS2_NUM_BANKS	CONFIG_SYS_MAX_FLASH_BANKS
+#define CONFIG_SYS_JFFS2_SORT_FRAGMENTS
 
 /*
  * JFFS2 partitions
@@ -216,83 +216,83 @@
 */
 #endif /* CONFIG_CMD_JFFS2 */
 
-#define CFG_MONITOR_BASE	TEXT_BASE
-#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
-#define CFG_RAMBOOT
+#define CONFIG_SYS_MONITOR_BASE	TEXT_BASE
+#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
+#define CONFIG_SYS_RAMBOOT
 #endif
 
-#define CFG_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor	*/
+#define CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor	*/
 
-#define CFG_ENV_IS_IN_FLASH
+#define CONFIG_ENV_IS_IN_FLASH
 
-#ifdef CFG_ENV_IS_IN_FLASH
-#define CFG_ENV_SECT_SIZE	0x10000
-#define CFG_ENV_ADDR		(CFG_MONITOR_BASE + CFG_MONITOR_LEN)
-#endif /* CFG_ENV_IS_IN_FLASH */
+#ifdef CONFIG_ENV_IS_IN_FLASH
+#define CONFIG_ENV_SECT_SIZE	0x10000
+#define CONFIG_ENV_ADDR		(CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)
+#endif /* CONFIG_ENV_IS_IN_FLASH */
 
-#define CFG_DEFAULT_IMMR	0xFF010000
+#define CONFIG_SYS_DEFAULT_IMMR	0xFF010000
 
-#define CFG_IMMR		0xF0000000
+#define CONFIG_SYS_IMMR		0xF0000000
 
-#define CFG_INIT_RAM_ADDR	CFG_IMMR
-#define CFG_INIT_RAM_END	0x2000	/* End of used area in DPRAM	*/
-#define CFG_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_IMMR
+#define CONFIG_SYS_INIT_RAM_END	0x2000	/* End of used area in DPRAM	*/
+#define CONFIG_SYS_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
-#define CFG_SDRAM_BASE		0x00000000
-#define CFG_SDRAM_SIZE		32
-#define CFG_SDRAM_BR		(CFG_SDRAM_BASE | 0x00000041)
-#define CFG_SDRAM_OR		0xFE002EC0
+#define CONFIG_SYS_SDRAM_BASE		0x00000000
+#define CONFIG_SYS_SDRAM_SIZE		32
+#define CONFIG_SYS_SDRAM_BR		(CONFIG_SYS_SDRAM_BASE | 0x00000041)
+#define CONFIG_SYS_SDRAM_OR		0xFE002EC0
 
-#define CFG_BCSR		0xFC000000
+#define CONFIG_SYS_BCSR		0xFC000000
 
 /* Hard reset configuration word */
-#define CFG_HRCW_MASTER		0x0A06875A /* Not used - provided by FPGA */
+#define CONFIG_SYS_HRCW_MASTER		0x0A06875A /* Not used - provided by FPGA */
 /* No slaves */
-#define CFG_HRCW_SLAVE1		0
-#define CFG_HRCW_SLAVE2		0
-#define CFG_HRCW_SLAVE3		0
-#define CFG_HRCW_SLAVE4		0
-#define CFG_HRCW_SLAVE5		0
-#define CFG_HRCW_SLAVE6		0
-#define CFG_HRCW_SLAVE7		0
+#define CONFIG_SYS_HRCW_SLAVE1		0
+#define CONFIG_SYS_HRCW_SLAVE2		0
+#define CONFIG_SYS_HRCW_SLAVE3		0
+#define CONFIG_SYS_HRCW_SLAVE4		0
+#define CONFIG_SYS_HRCW_SLAVE5		0
+#define CONFIG_SYS_HRCW_SLAVE6		0
+#define CONFIG_SYS_HRCW_SLAVE7		0
 
 #define BOOTFLAG_COLD		0x01	/* Normal Power-On: Boot from FLASH */
 #define BOOTFLAG_WARM		0x02	/* Software reboot                  */
 
-#define CFG_MALLOC_LEN		(4096 << 10)	/* Reserve 4 MB for malloc()	*/
-#define CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
+#define CONFIG_SYS_MALLOC_LEN		(4096 << 10)	/* Reserve 4 MB for malloc()	*/
+#define CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
 
-#define CFG_CACHELINE_SIZE	32	/* For MPC8260 CPUs */
+#define CONFIG_SYS_CACHELINE_SIZE	32	/* For MPC8260 CPUs */
 #if defined(CONFIG_CMD_KGDB)
-#  define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value */
+#  define CONFIG_SYS_CACHELINE_SHIFT	5	/* log base 2 of the above value */
 #endif
 
-#define CFG_HID0_INIT		0
-#define CFG_HID0_FINAL		(HID0_ICE | HID0_IFEM | HID0_ABE)
+#define CONFIG_SYS_HID0_INIT		0
+#define CONFIG_SYS_HID0_FINAL		(HID0_ICE | HID0_IFEM | HID0_ABE)
 
-#define CFG_HID2		0
+#define CONFIG_SYS_HID2		0
 
-#define CFG_SIUMCR		0x0E04C000
-#define CFG_SYPCR		0xFFFFFFC3
-#define CFG_BCR			0x00000000
-#define CFG_SCCR		SCCR_DFBRG01
+#define CONFIG_SYS_SIUMCR		0x0E04C000
+#define CONFIG_SYS_SYPCR		0xFFFFFFC3
+#define CONFIG_SYS_BCR			0x00000000
+#define CONFIG_SYS_SCCR		SCCR_DFBRG01
 
-#define CFG_RMR			RMR_CSRE
-#define CFG_TMCNTSC		(TMCNTSC_SEC|TMCNTSC_ALR|TMCNTSC_TCF|TMCNTSC_TCE)
-#define CFG_PISCR		(PISCR_PS|PISCR_PTF|PISCR_PTE)
-#define CFG_RCCR		0
+#define CONFIG_SYS_RMR			RMR_CSRE
+#define CONFIG_SYS_TMCNTSC		(TMCNTSC_SEC|TMCNTSC_ALR|TMCNTSC_TCF|TMCNTSC_TCE)
+#define CONFIG_SYS_PISCR		(PISCR_PS|PISCR_PTF|PISCR_PTE)
+#define CONFIG_SYS_RCCR		0
 
-#define CFG_PSDMR		0x8249A452
-#define CFG_PSRT		0x1F
-#define CFG_MPTPR		0x2000
+#define CONFIG_SYS_PSDMR		0x8249A452
+#define CONFIG_SYS_PSRT		0x1F
+#define CONFIG_SYS_MPTPR		0x2000
 
-#define CFG_BR0_PRELIM		(CFG_FLASH_BASE | 0x00001001)
-#define CFG_OR0_PRELIM		0xFF001ED6
-#define CFG_BR7_PRELIM		(CFG_BCSR | 0x00000801)
-#define CFG_OR7_PRELIM		0xFFFF87F6
+#define CONFIG_SYS_BR0_PRELIM		(CONFIG_SYS_FLASH_BASE | 0x00001001)
+#define CONFIG_SYS_OR0_PRELIM		0xFF001ED6
+#define CONFIG_SYS_BR7_PRELIM		(CONFIG_SYS_BCSR | 0x00000801)
+#define CONFIG_SYS_OR7_PRELIM		0xFFFF87F6
 
-#define CFG_RESET_ADDRESS	0xC0000000
+#define CONFIG_SYS_RESET_ADDRESS	0xC0000000
 
 #endif /* __CONFIG_H */
diff --git a/include/configs/SBC8540.h b/include/configs/SBC8540.h
index 93509ee08..34196319c 100644
--- a/include/configs/SBC8540.h
+++ b/include/configs/SBC8540.h
@@ -75,13 +75,12 @@
 /* below can be toggled for performance analysis. otherwise use default */
 #define CONFIG_L2_CACHE			    /* toggle L2 cache		*/
 #undef	CONFIG_BTB			    /* toggle branch predition	*/
-#undef	CONFIG_ADDR_STREAMING		    /* toggle addr streaming	*/
 
 #define CONFIG_BOARD_EARLY_INIT_F 1	    /* Call board_early_init_f	*/
 
-#undef	CFG_DRAM_TEST			    /* memory test, takes time	*/
-#define CFG_MEMTEST_START	0x00200000  /* memtest region */
-#define CFG_MEMTEST_END		0x00400000
+#undef	CONFIG_SYS_DRAM_TEST			    /* memory test, takes time	*/
+#define CONFIG_SYS_MEMTEST_START	0x00200000  /* memtest region */
+#define CONFIG_SYS_MEMTEST_END		0x00400000
 
 #if (defined(CONFIG_PCI) && defined(CONFIG_TSEC_ENET) || \
      defined(CONFIG_PCI) && defined(CONFIG_ETHER_ON_FCC) || \
@@ -93,17 +92,17 @@
  * Base addresses -- Note these are effective addresses where the
  * actual resources get mapped (not physical addresses)
  */
-#define CFG_CCSRBAR_DEFAULT	0xff700000	/* CCSRBAR Default	*/
+#define CONFIG_SYS_CCSRBAR_DEFAULT	0xff700000	/* CCSRBAR Default	*/
 
 #if XXX
-  #define CFG_CCSRBAR		0xfdf00000	/* relocated CCSRBAR	*/
+  #define CONFIG_SYS_CCSRBAR		0xfdf00000	/* relocated CCSRBAR	*/
 #else
-  #define CFG_CCSRBAR		0xff700000	/* default CCSRBAR	*/
+  #define CONFIG_SYS_CCSRBAR		0xff700000	/* default CCSRBAR	*/
 #endif
-#define CFG_CCSRBAR_PHYS	CFG_CCSRBAR	/* physical addr of CCSRBAR */
-#define CFG_IMMR		CFG_CCSRBAR	/* PQII uses CFG_IMMR	*/
+#define CONFIG_SYS_CCSRBAR_PHYS	CONFIG_SYS_CCSRBAR	/* physical addr of CCSRBAR */
+#define CONFIG_SYS_IMMR		CONFIG_SYS_CCSRBAR	/* PQII uses CONFIG_SYS_IMMR	*/
 
-#define CFG_SDRAM_SIZE		512		/* DDR is 512MB */
+#define CONFIG_SYS_SDRAM_SIZE		512		/* DDR is 512MB */
 
 /* DDR Setup */
 #define CONFIG_FSL_DDR1
@@ -120,8 +119,8 @@
 #undef CONFIG_ECC_INIT_VIA_DDRCONTROLLER	/* DDR controller or DMA? */
 #define CONFIG_MEM_INIT_VALUE	0xDeadBeef
 
-#define CFG_DDR_SDRAM_BASE	0x00000000
-#define CFG_SDRAM_BASE		CFG_DDR_SDRAM_BASE
+#define CONFIG_SYS_DDR_SDRAM_BASE	0x00000000
+#define CONFIG_SYS_SDRAM_BASE		CONFIG_SYS_DDR_SDRAM_BASE
 #define CONFIG_VERY_BIG_RAM
 
 #define CONFIG_NUM_DDR_CONTROLLERS	1
@@ -134,69 +133,68 @@
 #undef CONFIG_CLOCKS_IN_MHZ
 
 #if defined(CONFIG_RAM_AS_FLASH)
-  #define CFG_LBC_SDRAM_BASE	0xfc000000	/* Localbus SDRAM */
-  #define CFG_FLASH_BASE	0xf8000000      /* start of FLASH 8M  */
-  #define CFG_BR0_PRELIM	0xf8000801      /* port size 8bit */
-  #define CFG_OR0_PRELIM	0xf8000ff7	/* 8MB Flash		*/
+  #define CONFIG_SYS_LBC_SDRAM_BASE	0xfc000000	/* Localbus SDRAM */
+  #define CONFIG_SYS_FLASH_BASE	0xf8000000      /* start of FLASH 8M  */
+  #define CONFIG_SYS_BR0_PRELIM	0xf8000801      /* port size 8bit */
+  #define CONFIG_SYS_OR0_PRELIM	0xf8000ff7	/* 8MB Flash		*/
 #else /* Boot from real Flash */
-  #define CFG_LBC_SDRAM_BASE	0xf8000000	/* Localbus SDRAM */
-  #define CFG_FLASH_BASE	0xff800000      /* start of FLASH 8M    */
-  #define CFG_BR0_PRELIM	0xff800801      /* port size 8bit      */
-  #define CFG_OR0_PRELIM	0xff800ff7	/* 8MB Flash		*/
+  #define CONFIG_SYS_LBC_SDRAM_BASE	0xf8000000	/* Localbus SDRAM */
+  #define CONFIG_SYS_FLASH_BASE	0xff800000      /* start of FLASH 8M    */
+  #define CONFIG_SYS_BR0_PRELIM	0xff800801      /* port size 8bit      */
+  #define CONFIG_SYS_OR0_PRELIM	0xff800ff7	/* 8MB Flash		*/
 #endif
-#define CFG_LBC_SDRAM_SIZE	64		/* LBC SDRAM is 64MB	*/
+#define CONFIG_SYS_LBC_SDRAM_SIZE	64		/* LBC SDRAM is 64MB	*/
 
 /* local bus definitions */
-#define CFG_BR1_PRELIM		0xe4001801	/* 64M, 32-bit flash */
-#define CFG_OR1_PRELIM		0xfc000ff7
+#define CONFIG_SYS_BR1_PRELIM		0xe4001801	/* 64M, 32-bit flash */
+#define CONFIG_SYS_OR1_PRELIM		0xfc000ff7
 
-#define CFG_BR2_PRELIM		0x00000000	/* CS2 not used */
-#define CFG_OR2_PRELIM		0x00000000
+#define CONFIG_SYS_BR2_PRELIM		0x00000000	/* CS2 not used */
+#define CONFIG_SYS_OR2_PRELIM		0x00000000
 
-#define CFG_BR3_PRELIM		0xf0001861	/* 64MB localbus SDRAM	*/
-#define CFG_OR3_PRELIM		0xfc000cc1
+#define CONFIG_SYS_BR3_PRELIM		0xf0001861	/* 64MB localbus SDRAM	*/
+#define CONFIG_SYS_OR3_PRELIM		0xfc000cc1
 
 #if defined(CONFIG_RAM_AS_FLASH)
-  #define CFG_BR4_PRELIM	0xf4001861	/* 64M localbus SDRAM */
+  #define CONFIG_SYS_BR4_PRELIM	0xf4001861	/* 64M localbus SDRAM */
 #else
-  #define CFG_BR4_PRELIM	0xf8001861	/* 64M localbus SDRAM */
+  #define CONFIG_SYS_BR4_PRELIM	0xf8001861	/* 64M localbus SDRAM */
 #endif
-#define CFG_OR4_PRELIM		0xfc000cc1
+#define CONFIG_SYS_OR4_PRELIM		0xfc000cc1
 
-#define CFG_BR5_PRELIM		0xfc000801	/* 16M CS5 misc devices */
+#define CONFIG_SYS_BR5_PRELIM		0xfc000801	/* 16M CS5 misc devices */
 #if 1
-  #define CFG_OR5_PRELIM	0xff000ff7
+  #define CONFIG_SYS_OR5_PRELIM	0xff000ff7
 #else
-  #define CFG_OR5_PRELIM	0xff0000f0
+  #define CONFIG_SYS_OR5_PRELIM	0xff0000f0
 #endif
 
-#define CFG_BR6_PRELIM		0xe0001801	/* 64M, 32-bit flash */
-#define CFG_OR6_PRELIM		0xfc000ff7
-#define CFG_LBC_LCRR		0x00030002	/* local bus freq	*/
-#define CFG_LBC_LBCR		0x00000000
-#define CFG_LBC_LSRT		0x20000000
-#define CFG_LBC_MRTPR		0x20000000
-#define CFG_LBC_LSDMR_1		0x2861b723
-#define CFG_LBC_LSDMR_2		0x0861b723
-#define CFG_LBC_LSDMR_3		0x0861b723
-#define CFG_LBC_LSDMR_4		0x1861b723
-#define CFG_LBC_LSDMR_5		0x4061b723
+#define CONFIG_SYS_BR6_PRELIM		0xe0001801	/* 64M, 32-bit flash */
+#define CONFIG_SYS_OR6_PRELIM		0xfc000ff7
+#define CONFIG_SYS_LBC_LCRR		0x00030002	/* local bus freq	*/
+#define CONFIG_SYS_LBC_LBCR		0x00000000
+#define CONFIG_SYS_LBC_LSRT		0x20000000
+#define CONFIG_SYS_LBC_MRTPR		0x20000000
+#define CONFIG_SYS_LBC_LSDMR_1		0x2861b723
+#define CONFIG_SYS_LBC_LSDMR_2		0x0861b723
+#define CONFIG_SYS_LBC_LSDMR_3		0x0861b723
+#define CONFIG_SYS_LBC_LSDMR_4		0x1861b723
+#define CONFIG_SYS_LBC_LSDMR_5		0x4061b723
 
 /* just hijack the MOT BCSR def for SBC8560 misc devices */
-#define CFG_BCSR		((CFG_BR5_PRELIM & 0xff000000)|0x00400000)
+#define CONFIG_SYS_BCSR		((CONFIG_SYS_BR5_PRELIM & 0xff000000)|0x00400000)
 /* the size of CS5 needs to be >= 16M for TLB and LAW setups */
 
-#define CONFIG_L1_INIT_RAM
-#define CFG_INIT_RAM_LOCK	1
-#define CFG_INIT_RAM_ADDR	0x70000000	/* Initial RAM address	*/
-#define CFG_INIT_RAM_END	0x4000		/* End of used area in RAM */
+#define CONFIG_SYS_INIT_RAM_LOCK	1
+#define CONFIG_SYS_INIT_RAM_ADDR	0x70000000	/* Initial RAM address	*/
+#define CONFIG_SYS_INIT_RAM_END	0x4000		/* End of used area in RAM */
 
-#define CFG_GBL_DATA_SIZE	128		/* num bytes initial data */
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_GBL_DATA_SIZE	128		/* num bytes initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
-#define CFG_MONITOR_LEN		(256 * 1024)	/* Reserve 256 kB for Mon */
-#define CFG_MALLOC_LEN		(128 * 1024)	/* Reserved for malloc */
+#define CONFIG_SYS_MONITOR_LEN		(256 * 1024)	/* Reserve 256 kB for Mon */
+#define CONFIG_SYS_MALLOC_LEN		(128 * 1024)	/* Reserved for malloc */
 
 /* Serial Port */
 #undef  CONFIG_CONS_ON_SCC			/* define if console on SCC */
@@ -204,33 +202,33 @@
 
 #define CONFIG_CONS_INDEX     1
 #undef	CONFIG_SERIAL_SOFTWARE_FIFO
-#define CFG_NS16550
-#define CFG_NS16550_SERIAL
-#define CFG_NS16550_REG_SIZE	1
+#define CONFIG_SYS_NS16550
+#define CONFIG_SYS_NS16550_SERIAL
+#define CONFIG_SYS_NS16550_REG_SIZE	1
 #if 0
-#define CFG_NS16550_CLK		1843200 /* get_bus_freq(0) */
+#define CONFIG_SYS_NS16550_CLK		1843200 /* get_bus_freq(0) */
 #else
-#define CFG_NS16550_CLK		264000000 /* get_bus_freq(0) */
+#define CONFIG_SYS_NS16550_CLK		264000000 /* get_bus_freq(0) */
 #endif
 
 #define CONFIG_BAUDRATE		9600
 
-#define CFG_BAUDRATE_TABLE  \
+#define CONFIG_SYS_BAUDRATE_TABLE  \
 	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200}
 
 #if 0
-#define CFG_NS16550_COM1	((CFG_BR5_PRELIM & 0xff000000)+0x00700000)
-#define CFG_NS16550_COM2	((CFG_BR5_PRELIM & 0xff000000)+0x00800000)
+#define CONFIG_SYS_NS16550_COM1	((CONFIG_SYS_BR5_PRELIM & 0xff000000)+0x00700000)
+#define CONFIG_SYS_NS16550_COM2	((CONFIG_SYS_BR5_PRELIM & 0xff000000)+0x00800000)
 #else
 /* SBC8540 uses internal COMM controller */
-#define CFG_NS16550_COM1	((CFG_CCSRBAR & 0xfff00000)+0x00004500)
-#define CFG_NS16550_COM2	((CFG_CCSRBAR & 0xfff00000)+0x00004600)
+#define CONFIG_SYS_NS16550_COM1	((CONFIG_SYS_CCSRBAR & 0xfff00000)+0x00004500)
+#define CONFIG_SYS_NS16550_COM2	((CONFIG_SYS_CCSRBAR & 0xfff00000)+0x00004600)
 #endif
 
 /* Use the HUSH parser */
-#define CFG_HUSH_PARSER
-#ifdef	CFG_HUSH_PARSER
-#define CFG_PROMPT_HUSH_PS2 "> "
+#define CONFIG_SYS_HUSH_PARSER
+#ifdef	CONFIG_SYS_HUSH_PARSER
+#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
 #endif
 
 /*
@@ -239,14 +237,14 @@
 #define CONFIG_FSL_I2C		/* Use FSL common I2C driver */
 #define CONFIG_HARD_I2C		/* I2C with hardware support*/
 #undef	CONFIG_SOFT_I2C			/* I2C bit-banged */
-#define CFG_I2C_SPEED		400000	/* I2C speed and slave address	*/
-#define CFG_I2C_SLAVE		0x7F
-#define CFG_I2C_NOPROBES	{0x69}	/* Don't probe these addrs */
-#define CFG_I2C_OFFSET		0x3000
+#define CONFIG_SYS_I2C_SPEED		400000	/* I2C speed and slave address	*/
+#define CONFIG_SYS_I2C_SLAVE		0x7F
+#define CONFIG_SYS_I2C_NOPROBES	{0x69}	/* Don't probe these addrs */
+#define CONFIG_SYS_I2C_OFFSET		0x3000
 
-#define CFG_PCI_MEM_BASE	0xC0000000
-#define CFG_PCI_MEM_PHYS	0xC0000000
-#define CFG_PCI_MEM_SIZE	0x10000000
+#define CONFIG_SYS_PCI_MEM_BASE	0xC0000000
+#define CONFIG_SYS_PCI_MEM_PHYS	0xC0000000
+#define CONFIG_SYS_PCI_MEM_SIZE	0x10000000
 
 #if defined(CONFIG_TSEC_ENET)		/* TSEC Ethernet port */
 
@@ -273,10 +271,10 @@
      * - Select bus for bd/buffers
      * - Full duplex
      */
-    #define CFG_CMXFCR_MASK	(CMXFCR_FC2 | CMXFCR_RF2CS_MSK | CMXFCR_TF2CS_MSK)
-    #define CFG_CMXFCR_VALUE	(CMXFCR_RF2CS_CLK13 | CMXFCR_TF2CS_CLK14)
-    #define CFG_CPMFCR_RAMTYPE	0
-    #define CFG_FCC_PSMR	(FCC_PSMR_FDE)
+    #define CONFIG_SYS_CMXFCR_MASK	(CMXFCR_FC2 | CMXFCR_RF2CS_MSK | CMXFCR_TF2CS_MSK)
+    #define CONFIG_SYS_CMXFCR_VALUE	(CMXFCR_RF2CS_CLK13 | CMXFCR_TF2CS_CLK14)
+    #define CONFIG_SYS_CPMFCR_RAMTYPE	0
+    #define CONFIG_SYS_FCC_PSMR	(FCC_PSMR_FDE)
 
   #elif (CONFIG_ETHER_INDEX == 3)
     /* need more definitions here for FE3 */
@@ -306,47 +304,47 @@
  * FLASH and environment organization
  */
 
-#define CFG_FLASH_CFI		1	/* Flash is CFI conformant		*/
+#define CONFIG_SYS_FLASH_CFI		1	/* Flash is CFI conformant		*/
 #define CONFIG_FLASH_CFI_DRIVER	1	/* Use the common driver		*/
 #if 0
-#define CFG_FLASH_USE_BUFFER_WRITE 1    /* use buffered writes (20x faster)     */
-#define CFG_FLASH_PROTECTION		/* use hardware protection		*/
+#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1    /* use buffered writes (20x faster)     */
+#define CONFIG_SYS_FLASH_PROTECTION		/* use hardware protection		*/
 #endif
-#define CFG_MAX_FLASH_SECT	64	/* max number of sectors on one chip	*/
-#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
+#define CONFIG_SYS_MAX_FLASH_SECT	64	/* max number of sectors on one chip	*/
+#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
 
-#undef	CFG_FLASH_CHECKSUM
-#define CFG_FLASH_ERASE_TOUT	200000		/* Timeout for Flash Erase (in ms)	*/
-#define CFG_FLASH_WRITE_TOUT	50000		/* Timeout for Flash Write (in ms)	*/
+#undef	CONFIG_SYS_FLASH_CHECKSUM
+#define CONFIG_SYS_FLASH_ERASE_TOUT	200000		/* Timeout for Flash Erase (in ms)	*/
+#define CONFIG_SYS_FLASH_WRITE_TOUT	50000		/* Timeout for Flash Write (in ms)	*/
 
-#define CFG_MONITOR_BASE	TEXT_BASE	/* start of monitor	*/
+#define CONFIG_SYS_MONITOR_BASE	TEXT_BASE	/* start of monitor	*/
 
 #if 0
 /* XXX This doesn't work and I don't want to fix it */
-#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
-  #define CFG_RAMBOOT
+#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
+  #define CONFIG_SYS_RAMBOOT
 #else
-  #undef  CFG_RAMBOOT
+  #undef  CONFIG_SYS_RAMBOOT
 #endif
 #endif
 
 /* Environment */
-#if !defined(CFG_RAMBOOT)
+#if !defined(CONFIG_SYS_RAMBOOT)
   #if defined(CONFIG_RAM_AS_FLASH)
-    #define CFG_ENV_IS_NOWHERE
-    #define CFG_ENV_ADDR	(CFG_FLASH_BASE + 0x100000)
-    #define CFG_ENV_SIZE	0x2000
+    #define CONFIG_ENV_IS_NOWHERE
+    #define CONFIG_ENV_ADDR	(CONFIG_SYS_FLASH_BASE + 0x100000)
+    #define CONFIG_ENV_SIZE	0x2000
   #else
-    #define CFG_ENV_IS_IN_FLASH	1
-    #define CFG_ENV_SECT_SIZE	0x20000 /* 128K(one sector) for env */
-    #define CFG_ENV_ADDR	(CFG_MONITOR_BASE - CFG_ENV_SECT_SIZE)
-    #define CFG_ENV_SIZE	0x2000 /* CFG_ENV_SECT_SIZE */
+    #define CONFIG_ENV_IS_IN_FLASH	1
+    #define CONFIG_ENV_SECT_SIZE	0x20000 /* 128K(one sector) for env */
+    #define CONFIG_ENV_ADDR	(CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
+    #define CONFIG_ENV_SIZE	0x2000 /* CONFIG_ENV_SECT_SIZE */
   #endif
 #else
-  #define CFG_NO_FLASH		1	/* Flash is not usable now	*/
-  #define CFG_ENV_IS_NOWHERE	1	/* Store ENV in memory only	*/
-  #define CFG_ENV_ADDR		(CFG_MONITOR_BASE - 0x1000)
-  #define CFG_ENV_SIZE		0x2000
+  #define CONFIG_SYS_NO_FLASH		1	/* Flash is not usable now	*/
+  #define CONFIG_ENV_IS_NOWHERE	1	/* Store ENV in memory only	*/
+  #define CONFIG_ENV_ADDR		(CONFIG_SYS_MONITOR_BASE - 0x1000)
+  #define CONFIG_ENV_SIZE		0x2000
 #endif
 
 #define CONFIG_BOOTARGS "root=/dev/nfs rw nfsroot=192.168.0.251:/tftpboot ip=192.168.0.105:192.168.0.251::255.255.255.0:sbc8560:eth0:off console=ttyS0,9600"
@@ -355,7 +353,7 @@
 #define CONFIG_BOOTDELAY	5	/* -1 disable autoboot */
 
 #define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
-#define CFG_LOADS_BAUD_CHANGE	1	/* allow baudrate change	*/
+#define CONFIG_SYS_LOADS_BAUD_CHANGE	1	/* allow baudrate change	*/
 
 
 /*
@@ -383,7 +381,7 @@
     #define CONFIG_CMD_MII
 #endif
 
-#if defined(CFG_RAMBOOT)
+#if defined(CONFIG_SYS_RAMBOOT)
     #undef CONFIG_CMD_ENV
     #undef CONFIG_CMD_LOADS
 #endif
@@ -394,25 +392,25 @@
 /*
  * Miscellaneous configurable options
  */
-#define CFG_LONGHELP			/* undef to save memory		*/
-#define CFG_PROMPT	"SBC8540=> " /* Monitor Command Prompt	*/
+#define CONFIG_SYS_LONGHELP			/* undef to save memory		*/
+#define CONFIG_SYS_PROMPT	"SBC8540=> " /* Monitor Command Prompt	*/
 #if defined(CONFIG_CMD_KGDB)
-  #define CFG_CBSIZE	1024		/* Console I/O Buffer Size	*/
+  #define CONFIG_SYS_CBSIZE	1024		/* Console I/O Buffer Size	*/
 #else
-  #define CFG_CBSIZE	256		/* Console I/O Buffer Size	*/
+  #define CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size	*/
 #endif
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define CFG_MAXARGS	16		/* max number of command args	*/
-#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size	*/
-#define CFG_LOAD_ADDR	0x1000000	/* default load address */
-#define CFG_HZ		1000		/* decrementer freq: 1 ms ticks */
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS	16		/* max number of command args	*/
+#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
+#define CONFIG_SYS_LOAD_ADDR	0x1000000	/* default load address */
+#define CONFIG_SYS_HZ		1000		/* decrementer freq: 1 ms ticks */
 
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define CFG_BOOTMAPSZ		(8 << 20) /* Initial Memory map for Linux */
+#define CONFIG_SYS_BOOTMAPSZ		(8 << 20) /* Initial Memory map for Linux */
 
 /*
  * Internal Definitions
diff --git a/include/configs/SCM.h b/include/configs/SCM.h
index febfc3926..c6fb07499 100644
--- a/include/configs/SCM.h
+++ b/include/configs/SCM.h
@@ -75,8 +75,8 @@
 /* enable I2C and select the hardware/software driver */
 #undef  CONFIG_HARD_I2C			/* I2C with hardware support	*/
 #define CONFIG_SOFT_I2C		1	/* I2C bit-banged		*/
-#define CFG_I2C_SPEED		400000	/* I2C speed and slave address	*/
-#define CFG_I2C_SLAVE		0x7F
+#define CONFIG_SYS_I2C_SPEED		400000	/* I2C speed and slave address	*/
+#define CONFIG_SYS_I2C_SLAVE		0x7F
 
 /*
  * Software (bit-bang) I2C driver configuration
@@ -92,10 +92,10 @@
 			else    iop->pdat &= ~0x00020000
 #define I2C_DELAY	udelay(5)	/* 1/4 I2C clock duration */
 
-#define CFG_I2C_EEPROM_ADDR	0x50
-#define CFG_I2C_EEPROM_ADDR_LEN 2
-#define CFG_EEPROM_PAGE_WRITE_BITS	4
-#define CFG_EEPROM_PAGE_WRITE_DELAY_MS	10	/* and takes up to 10 msec */
+#define CONFIG_SYS_I2C_EEPROM_ADDR	0x50
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS	4
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	10	/* and takes up to 10 msec */
 
 #define CONFIG_I2C_X
 
@@ -151,10 +151,10 @@
  * - RAM for BD/Buffers is on the 60x Bus (see 28-13)
  * - Enable Full Duplex in FSMR
  */
-# define CFG_CMXFCR_MASK	(CMXFCR_FC1|CMXFCR_RF1CS_MSK|CMXFCR_TF1CS_MSK)
-# define CFG_CMXFCR_VALUE	(CMXFCR_RF1CS_CLK12|CMXFCR_TF1CS_CLK11)
-# define CFG_CPMFCR_RAMTYPE	0
-# define CFG_FCC_PSMR		(FCC_PSMR_FDE|FCC_PSMR_LPB)
+# define CONFIG_SYS_CMXFCR_MASK	(CMXFCR_FC1|CMXFCR_RF1CS_MSK|CMXFCR_TF1CS_MSK)
+# define CONFIG_SYS_CMXFCR_VALUE	(CMXFCR_RF1CS_CLK12|CMXFCR_TF1CS_CLK11)
+# define CONFIG_SYS_CPMFCR_RAMTYPE	0
+# define CONFIG_SYS_FCC_PSMR		(FCC_PSMR_FDE|FCC_PSMR_LPB)
 
 #elif defined(CONFIG_ETHER_ON_FCC) && (CONFIG_ETHER_INDEX == 3)
 
@@ -164,10 +164,10 @@
  * - RAM for BD/Buffers is on the 60x Bus (see 28-13)
  * - Enable Full Duplex in FSMR
  */
-# define CFG_CMXFCR_MASK	(CMXFCR_FC3|CMXFCR_RF3CS_MSK|CMXFCR_TF3CS_MSK)
-# define CFG_CMXFCR_VALUE	(CMXFCR_RF3CS_CLK15|CMXFCR_TF3CS_CLK16)
-# define CFG_CPMFCR_RAMTYPE	0
-# define CFG_FCC_PSMR		(FCC_PSMR_FDE|FCC_PSMR_LPB)
+# define CONFIG_SYS_CMXFCR_MASK	(CMXFCR_FC3|CMXFCR_RF3CS_MSK|CMXFCR_TF3CS_MSK)
+# define CONFIG_SYS_CMXFCR_VALUE	(CMXFCR_RF3CS_CLK15|CMXFCR_TF3CS_CLK16)
+# define CONFIG_SYS_CPMFCR_RAMTYPE	0
+# define CONFIG_SYS_FCC_PSMR		(FCC_PSMR_FDE|FCC_PSMR_LPB)
 
 #endif /* CONFIG_ETHER_ON_FCC, CONFIG_ETHER_INDEX */
 
@@ -186,7 +186,7 @@
 #endif
 
 #define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
-#undef	CFG_LOADS_BAUD_CHANGE		/* don't allow baudrate change	*/
+#undef	CONFIG_SYS_LOADS_BAUD_CHANGE		/* don't allow baudrate change	*/
 
 #undef	CONFIG_WATCHDOG			/* watchdog disabled		*/
 
@@ -214,27 +214,27 @@
 /*
  * Miscellaneous configurable options
  */
-#define	CFG_LONGHELP			/* undef to save memory		*/
-#define	CFG_PROMPT	"=> "		/* Monitor Command Prompt	*/
+#define	CONFIG_SYS_LONGHELP			/* undef to save memory		*/
+#define	CONFIG_SYS_PROMPT	"=> "		/* Monitor Command Prompt	*/
 #if defined(CONFIG_CMD_KGDB)
-#define	CFG_CBSIZE	1024		/* Console I/O Buffer Size	*/
+#define	CONFIG_SYS_CBSIZE	1024		/* Console I/O Buffer Size	*/
 #else
-#define	CFG_CBSIZE	256		/* Console I/O Buffer Size	*/
+#define	CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size	*/
 #endif
-#define	CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define	CFG_MAXARGS	16		/* max number of command args	*/
-#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+#define	CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define	CONFIG_SYS_MAXARGS	16		/* max number of command args	*/
+#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
 
-#define CFG_MEMTEST_START 0x0400000	/* memtest works on		*/
-#define CFG_MEMTEST_END	0x0C00000	/* 4 ... 12 MB in DRAM		*/
+#define CONFIG_SYS_MEMTEST_START 0x0400000	/* memtest works on		*/
+#define CONFIG_SYS_MEMTEST_END	0x0C00000	/* 4 ... 12 MB in DRAM		*/
 
-#define	CFG_LOAD_ADDR	0x100000	/* default load address		*/
+#define	CONFIG_SYS_LOAD_ADDR	0x100000	/* default load address		*/
 
-#define	CFG_HZ		1000		/* decrementer freq: 1 ms ticks	*/
+#define	CONFIG_SYS_HZ		1000		/* decrementer freq: 1 ms ticks	*/
 
-#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
 
-#define	CFG_RESET_ADDRESS 0xFFFFFFFC	/* "bad" address		*/
+#define	CONFIG_SYS_RESET_ADDRESS 0xFFFFFFFC	/* "bad" address		*/
 
 #define CONFIG_MISC_INIT_R		/* have misc_init_r() function	*/
 
@@ -243,104 +243,104 @@
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define CFG_BOOTMAPSZ        (8 << 20)       /* Initial Memory map for Linux */
+#define CONFIG_SYS_BOOTMAPSZ        (8 << 20)       /* Initial Memory map for Linux */
 
 
 /* What should the base address of the main FLASH be and how big is
  * it (in MBytes)? This must contain TEXT_BASE from board/tqm8260/config.mk
  * The main FLASH is whichever is connected to *CS0.
  */
-#define CFG_FLASH0_BASE 0x40000000
-#define CFG_FLASH1_BASE 0x60000000
-#define CFG_FLASH0_SIZE 32
-#define CFG_FLASH1_SIZE 32
+#define CONFIG_SYS_FLASH0_BASE 0x40000000
+#define CONFIG_SYS_FLASH1_BASE 0x60000000
+#define CONFIG_SYS_FLASH0_SIZE 32
+#define CONFIG_SYS_FLASH1_SIZE 32
 
 /* Flash bank size (for preliminary settings)
  */
-#define CFG_FLASH_SIZE CFG_FLASH0_SIZE
+#define CONFIG_SYS_FLASH_SIZE CONFIG_SYS_FLASH0_SIZE
 
 /*-----------------------------------------------------------------------
  * FLASH organization
  */
-#define CFG_MAX_FLASH_BANKS	1	/* max num of memory banks      */
-#define CFG_MAX_FLASH_SECT	128	/* max num of sects on one chip */
+#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max num of memory banks      */
+#define CONFIG_SYS_MAX_FLASH_SECT	128	/* max num of sects on one chip */
 
-#define CFG_FLASH_ERASE_TOUT	240000	/* Flash Erase Timeout (in ms)  */
-#define CFG_FLASH_WRITE_TOUT	500	/* Flash Write Timeout (in ms)  */
+#define CONFIG_SYS_FLASH_ERASE_TOUT	240000	/* Flash Erase Timeout (in ms)  */
+#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Flash Write Timeout (in ms)  */
 
 #if 0
 /* Start port with environment in flash; switch to EEPROM later */
-#define CFG_ENV_IS_IN_FLASH	1
-#define CFG_ENV_ADDR		(CFG_FLASH_BASE+0x40000)
-#define CFG_ENV_SIZE		0x40000
-#define CFG_ENV_SECT_SIZE	0x40000
+#define CONFIG_ENV_IS_IN_FLASH	1
+#define CONFIG_ENV_ADDR		(CONFIG_SYS_FLASH_BASE+0x40000)
+#define CONFIG_ENV_SIZE		0x40000
+#define CONFIG_ENV_SECT_SIZE	0x40000
 #else
 /* Final version: environment in EEPROM */
-#define CFG_ENV_IS_IN_EEPROM	1
-#define CFG_ENV_OFFSET		0
-#define CFG_ENV_SIZE		2048
+#define CONFIG_ENV_IS_IN_EEPROM	1
+#define CONFIG_ENV_OFFSET		0
+#define CONFIG_ENV_SIZE		2048
 #endif
 
 /*-----------------------------------------------------------------------
  * Hardware Information Block
  */
-#define CFG_HWINFO_OFFSET	0x0003FFC0	/* offset of HW Info block */
-#define CFG_HWINFO_SIZE		0x00000040	/* size   of HW Info block */
-#define CFG_HWINFO_MAGIC	0x54514D38	/* 'TQM8' */
+#define CONFIG_SYS_HWINFO_OFFSET	0x0003FFC0	/* offset of HW Info block */
+#define CONFIG_SYS_HWINFO_SIZE		0x00000040	/* size   of HW Info block */
+#define CONFIG_SYS_HWINFO_MAGIC	0x54514D38	/* 'TQM8' */
 
 /*-----------------------------------------------------------------------
  * Hard Reset Configuration Words
  *
- * if you change bits in the HRCW, you must also change the CFG_*
+ * if you change bits in the HRCW, you must also change the CONFIG_SYS_*
  * defines for the various registers affected by the HRCW e.g. changing
- * HRCW_DPPCxx requires you to also change CFG_SIUMCR.
+ * HRCW_DPPCxx requires you to also change CONFIG_SYS_SIUMCR.
  */
 #if defined(CONFIG_266MHz)
-#define CFG_HRCW_MASTER		(HRCW_CIP | HRCW_ISB111 | HRCW_BMS | \
+#define CONFIG_SYS_HRCW_MASTER		(HRCW_CIP | HRCW_ISB111 | HRCW_BMS | \
 							      HRCW_MODCK_H0111)
 #elif defined(CONFIG_300MHz)
-#define CFG_HRCW_MASTER		(HRCW_CIP | HRCW_ISB111 | HRCW_BMS | \
+#define CONFIG_SYS_HRCW_MASTER		(HRCW_CIP | HRCW_ISB111 | HRCW_BMS | \
 							      HRCW_MODCK_H0110)
 #else
-#define CFG_HRCW_MASTER		(HRCW_CIP | HRCW_ISB111 | HRCW_BMS)
+#define CONFIG_SYS_HRCW_MASTER		(HRCW_CIP | HRCW_ISB111 | HRCW_BMS)
 #endif
 
 /* no slaves so just fill with zeros */
-#define CFG_HRCW_SLAVE1		0
-#define CFG_HRCW_SLAVE2		0
-#define CFG_HRCW_SLAVE3		0
-#define CFG_HRCW_SLAVE4		0
-#define CFG_HRCW_SLAVE5		0
-#define CFG_HRCW_SLAVE6		0
-#define CFG_HRCW_SLAVE7		0
+#define CONFIG_SYS_HRCW_SLAVE1		0
+#define CONFIG_SYS_HRCW_SLAVE2		0
+#define CONFIG_SYS_HRCW_SLAVE3		0
+#define CONFIG_SYS_HRCW_SLAVE4		0
+#define CONFIG_SYS_HRCW_SLAVE5		0
+#define CONFIG_SYS_HRCW_SLAVE6		0
+#define CONFIG_SYS_HRCW_SLAVE7		0
 
 /*-----------------------------------------------------------------------
  * Internal Memory Mapped Register
  */
-#define CFG_IMMR		0xFFF00000
+#define CONFIG_SYS_IMMR		0xFFF00000
 
 /*-----------------------------------------------------------------------
  * Definitions for initial stack pointer and data area (in DPRAM)
  */
-#define CFG_INIT_RAM_ADDR	CFG_IMMR
-#define CFG_INIT_RAM_END	0x4000  /* End of used area in DPRAM    */
-#define CFG_GBL_DATA_SIZE	128 /* size in bytes reserved for initial data*/
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_IMMR
+#define CONFIG_SYS_INIT_RAM_END	0x4000  /* End of used area in DPRAM    */
+#define CONFIG_SYS_GBL_DATA_SIZE	128 /* size in bytes reserved for initial data*/
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
 /*-----------------------------------------------------------------------
  * Start addresses for the final memory configuration
  * (Set up by the startup code)
- * Please note that CFG_SDRAM_BASE _must_ start at 0
+ * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
  *
- * 60x SDRAM is mapped at CFG_SDRAM_BASE, local SDRAM
+ * 60x SDRAM is mapped at CONFIG_SYS_SDRAM_BASE, local SDRAM
  * is mapped at SDRAM_BASE2_PRELIM.
  */
-#define CFG_SDRAM_BASE		0x00000000
-#define CFG_FLASH_BASE		CFG_FLASH0_BASE
-#define CFG_MONITOR_BASE	TEXT_BASE
-#define CFG_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor */
-#define CFG_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()*/
+#define CONFIG_SYS_SDRAM_BASE		0x00000000
+#define CONFIG_SYS_FLASH_BASE		CONFIG_SYS_FLASH0_BASE
+#define CONFIG_SYS_MONITOR_BASE	TEXT_BASE
+#define CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor */
+#define CONFIG_SYS_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()*/
 
 /*
  * Internal Definitions
@@ -354,16 +354,16 @@
 /*-----------------------------------------------------------------------
  * Hardware Information Block
  */
-#define CFG_HWINFO_OFFSET	0x0003FFC0	/* offset of HW Info block */
-#define CFG_HWINFO_SIZE		0x00000040	/* size   of HW Info block */
-#define CFG_HWINFO_MAGIC	0x54514D38	/* 'TQM8' */
+#define CONFIG_SYS_HWINFO_OFFSET	0x0003FFC0	/* offset of HW Info block */
+#define CONFIG_SYS_HWINFO_SIZE		0x00000040	/* size   of HW Info block */
+#define CONFIG_SYS_HWINFO_MAGIC	0x54514D38	/* 'TQM8' */
 
 /*-----------------------------------------------------------------------
  * Cache Configuration
  */
-#define CFG_CACHELINE_SIZE      32      /* For MPC8260 CPU              */
+#define CONFIG_SYS_CACHELINE_SIZE      32      /* For MPC8260 CPU              */
 #if defined(CONFIG_CMD_KGDB)
-# define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value */
+# define CONFIG_SYS_CACHELINE_SHIFT	5	/* log base 2 of the above value */
 #endif
 
 /*-----------------------------------------------------------------------
@@ -376,28 +376,28 @@
  *
  * HID1 has only read-only information - nothing to set.
  */
-#define CFG_HID0_INIT   (HID0_ICE|HID0_DCE|HID0_ICFI|HID0_DCI|\
+#define CONFIG_SYS_HID0_INIT   (HID0_ICE|HID0_DCE|HID0_ICFI|HID0_DCI|\
 				HID0_IFEM|HID0_ABE)
-#define CFG_HID0_FINAL  (HID0_IFEM|HID0_ABE)
-#define CFG_HID2        0
+#define CONFIG_SYS_HID0_FINAL  (HID0_IFEM|HID0_ABE)
+#define CONFIG_SYS_HID2        0
 
 /*-----------------------------------------------------------------------
  * RMR - Reset Mode Register                                     5-5
  *-----------------------------------------------------------------------
  * turn on Checkstop Reset Enable
  */
-#define CFG_RMR         RMR_CSRE
+#define CONFIG_SYS_RMR         RMR_CSRE
 
 /*-----------------------------------------------------------------------
  * BCR - Bus Configuration                                       4-25
  *-----------------------------------------------------------------------
  */
 #ifdef	CONFIG_BUSMODE_60x
-#define CFG_BCR         (BCR_EBM|BCR_L2C|BCR_LETM|\
+#define CONFIG_SYS_BCR         (BCR_EBM|BCR_L2C|BCR_LETM|\
 			 BCR_NPQM0|BCR_NPQM1|BCR_NPQM2)	/* 60x mode  */
 #else
 #define BCR_APD01	0x10000000
-#define CFG_BCR		(BCR_APD01|BCR_ETM|BCR_LETM)	/* 8260 mode */
+#define CONFIG_SYS_BCR		(BCR_APD01|BCR_ETM|BCR_LETM)	/* 8260 mode */
 #endif
 
 /*-----------------------------------------------------------------------
@@ -405,9 +405,9 @@
  *-----------------------------------------------------------------------
  */
 #if 0
-#define CFG_SIUMCR      (SIUMCR_DPPC10|SIUMCR_APPC10)
+#define CONFIG_SYS_SIUMCR      (SIUMCR_DPPC10|SIUMCR_APPC10)
 #else
-#define CFG_SIUMCR      (SIUMCR_DPPC00|SIUMCR_APPC10)
+#define CONFIG_SYS_SIUMCR      (SIUMCR_DPPC00|SIUMCR_APPC10)
 #endif
 
 
@@ -418,10 +418,10 @@
  * Watchdog & Bus Monitor Timer max, 60x Bus Monitor enable
  */
 #if defined(CONFIG_WATCHDOG)
-#define CFG_SYPCR       (SYPCR_SWTC|SYPCR_BMT|SYPCR_PBME|SYPCR_LBME|\
+#define CONFIG_SYS_SYPCR       (SYPCR_SWTC|SYPCR_BMT|SYPCR_PBME|SYPCR_LBME|\
 			 SYPCR_SWRI|SYPCR_SWP|SYPCR_SWE)
 #else
-#define CFG_SYPCR       (SYPCR_SWTC|SYPCR_BMT|SYPCR_PBME|SYPCR_LBME|\
+#define CONFIG_SYS_SYPCR       (SYPCR_SWTC|SYPCR_BMT|SYPCR_PBME|SYPCR_LBME|\
 			 SYPCR_SWRI|SYPCR_SWP)
 #endif /* CONFIG_WATCHDOG */
 
@@ -431,7 +431,7 @@
  * Clear once per Second and Alarm Interrupt Status, Set 32KHz timersclk,
  * and enable Time Counter
  */
-#define CFG_TMCNTSC     (TMCNTSC_SEC|TMCNTSC_ALR|TMCNTSC_TCF|TMCNTSC_TCE)
+#define CONFIG_SYS_TMCNTSC     (TMCNTSC_SEC|TMCNTSC_ALR|TMCNTSC_TCF|TMCNTSC_TCE)
 
 /*-----------------------------------------------------------------------
  * PISCR - Periodic Interrupt Status and Control                 4-42
@@ -439,20 +439,20 @@
  * Clear Periodic Interrupt Status, Set 32KHz timersclk, and enable
  * Periodic timer
  */
-#define CFG_PISCR       (PISCR_PS|PISCR_PTF|PISCR_PTE)
+#define CONFIG_SYS_PISCR       (PISCR_PS|PISCR_PTF|PISCR_PTE)
 
 /*-----------------------------------------------------------------------
  * SCCR - System Clock Control                                   9-8
  *-----------------------------------------------------------------------
  * Ensure DFBRG is Divide by 16
  */
-#define CFG_SCCR        0
+#define CONFIG_SYS_SCCR        0
 
 /*-----------------------------------------------------------------------
  * RCCR - RISC Controller Configuration                         13-7
  *-----------------------------------------------------------------------
  */
-#define CFG_RCCR        0
+#define CONFIG_SYS_RCCR        0
 
 /*
  * Init Memory Controller:
@@ -467,17 +467,17 @@
 
 	/* Initialize SDRAM on local bus
 	 */
-#define CFG_INIT_LOCAL_SDRAM
+#define CONFIG_SYS_INIT_LOCAL_SDRAM
 
 #define SDRAM_MAX_SIZE	0x08000000	/* max. 128 MB		*/
 
 /* Minimum mask to separate preliminary
  * address ranges for CS[0:2]
  */
-#define CFG_GLOBAL_SDRAM_LIMIT	(512<<20)	/* less than 512 MB */
-#define CFG_LOCAL_SDRAM_LIMIT	(128<<20)	/* less than 128 MB */
+#define CONFIG_SYS_GLOBAL_SDRAM_LIMIT	(512<<20)	/* less than 512 MB */
+#define CONFIG_SYS_LOCAL_SDRAM_LIMIT	(128<<20)	/* less than 128 MB */
 
-#define CFG_MPTPR       0x4000
+#define CONFIG_SYS_MPTPR       0x4000
 
 /*-----------------------------------------------------------------------------
  * Address for Mode Register Set (MRS) command
@@ -494,17 +494,17 @@
  *  Settings:              |  0  |  0    0  |  0  1  0  |  0  |   0  1  0    |
  *-----------------------------------------------------------------------------
  */
-#define CFG_MRS_OFFS	0x00000110
+#define CONFIG_SYS_MRS_OFFS	0x00000110
 
 
 /* Bank 0 - FLASH
  */
-#define CFG_BR0_PRELIM  ((CFG_FLASH_BASE & BRx_BA_MSK)  |\
+#define CONFIG_SYS_BR0_PRELIM  ((CONFIG_SYS_FLASH_BASE & BRx_BA_MSK)  |\
 			 BRx_PS_64                      |\
 			 BRx_MS_GPCM_P                  |\
 			 BRx_V)
 
-#define CFG_OR0_PRELIM  (MEG_TO_AM(CFG_FLASH_SIZE)      |\
+#define CONFIG_SYS_OR0_PRELIM  (MEG_TO_AM(CONFIG_SYS_FLASH_SIZE)      |\
 			 ORxG_CSNT                      |\
 			 ORxG_ACS_DIV1                  |\
 			 ORxG_SCY_3_CLK                 |\
@@ -517,25 +517,25 @@
 
 /* Bank 1 - 60x bus SDRAM
  */
-#define CFG_PSRT        0x20
-#define CFG_LSRT        0x20
-#ifndef CFG_RAMBOOT
-#define CFG_BR1_PRELIM  ((CFG_SDRAM_BASE & BRx_BA_MSK)  |\
+#define CONFIG_SYS_PSRT        0x20
+#define CONFIG_SYS_LSRT        0x20
+#ifndef CONFIG_SYS_RAMBOOT
+#define CONFIG_SYS_BR1_PRELIM  ((CONFIG_SYS_SDRAM_BASE & BRx_BA_MSK)  |\
 			 BRx_PS_64                      |\
 			 BRx_MS_SDRAM_P                 |\
 			 BRx_V)
 
-#define CFG_OR1_PRELIM	CFG_OR1_8COL
+#define CONFIG_SYS_OR1_PRELIM	CONFIG_SYS_OR1_8COL
 
 
 	/* SDRAM initialization values for 8-column chips
 	 */
-#define CFG_OR1_8COL    ((~(CFG_GLOBAL_SDRAM_LIMIT-1) & ORxS_SDAM_MSK) |\
+#define CONFIG_SYS_OR1_8COL    ((~(CONFIG_SYS_GLOBAL_SDRAM_LIMIT-1) & ORxS_SDAM_MSK) |\
 			 ORxS_BPD_4                     |\
 			 ORxS_ROWST_PBI1_A7             |\
 			 ORxS_NUMR_12)
 
-#define CFG_PSDMR_8COL  (PSDMR_PBI                      |\
+#define CONFIG_SYS_PSDMR_8COL  (PSDMR_PBI                      |\
 			 PSDMR_SDAM_A15_IS_A5           |\
 			 PSDMR_BSMA_A12_A14             |\
 			 PSDMR_SDA10_PBI1_A8            |\
@@ -549,12 +549,12 @@
 
 	/* SDRAM initialization values for 9-column chips
 	 */
-#define CFG_OR1_9COL    ((~(CFG_GLOBAL_SDRAM_LIMIT-1) & ORxS_SDAM_MSK) |\
+#define CONFIG_SYS_OR1_9COL    ((~(CONFIG_SYS_GLOBAL_SDRAM_LIMIT-1) & ORxS_SDAM_MSK) |\
 			 ORxS_BPD_4                     |\
 			 ORxS_ROWST_PBI1_A5             |\
 			 ORxS_NUMR_13)
 
-#define CFG_PSDMR_9COL  (PSDMR_PBI                      |\
+#define CONFIG_SYS_PSDMR_9COL  (PSDMR_PBI                      |\
 			 PSDMR_SDAM_A16_IS_A5           |\
 			 PSDMR_BSMA_A12_A14             |\
 			 PSDMR_SDA10_PBI1_A7            |\
@@ -568,24 +568,24 @@
 
 /* Bank 2 - Local bus SDRAM
  */
-#ifdef CFG_INIT_LOCAL_SDRAM
-#define CFG_BR2_PRELIM  ((SDRAM_BASE2_PRELIM & BRx_BA_MSK) |\
+#ifdef CONFIG_SYS_INIT_LOCAL_SDRAM
+#define CONFIG_SYS_BR2_PRELIM  ((SDRAM_BASE2_PRELIM & BRx_BA_MSK) |\
 			 BRx_PS_32                      |\
 			 BRx_MS_SDRAM_L                 |\
 			 BRx_V)
 
-#define CFG_OR2_PRELIM	CFG_OR2_8COL
+#define CONFIG_SYS_OR2_PRELIM	CONFIG_SYS_OR2_8COL
 
 #define SDRAM_BASE2_PRELIM	0x80000000
 
 	/* SDRAM initialization values for 8-column chips
 	 */
-#define CFG_OR2_8COL    ((~(CFG_LOCAL_SDRAM_LIMIT-1) & ORxS_SDAM_MSK) |\
+#define CONFIG_SYS_OR2_8COL    ((~(CONFIG_SYS_LOCAL_SDRAM_LIMIT-1) & ORxS_SDAM_MSK) |\
 			 ORxS_BPD_4                     |\
 			 ORxS_ROWST_PBI1_A8             |\
 			 ORxS_NUMR_12)
 
-#define CFG_LSDMR_8COL  (PSDMR_PBI                      |\
+#define CONFIG_SYS_LSDMR_8COL  (PSDMR_PBI                      |\
 			 PSDMR_SDAM_A15_IS_A5           |\
 			 PSDMR_BSMA_A13_A15             |\
 			 PSDMR_SDA10_PBI1_A9            |\
@@ -599,12 +599,12 @@
 
 	/* SDRAM initialization values for 9-column chips
 	 */
-#define CFG_OR2_9COL    ((~(CFG_LOCAL_SDRAM_LIMIT-1) & ORxS_SDAM_MSK) |\
+#define CONFIG_SYS_OR2_9COL    ((~(CONFIG_SYS_LOCAL_SDRAM_LIMIT-1) & ORxS_SDAM_MSK) |\
 			 ORxS_BPD_4                     |\
 			 ORxS_ROWST_PBI1_A6             |\
 			 ORxS_NUMR_13)
 
-#define CFG_LSDMR_9COL  (PSDMR_PBI                      |\
+#define CONFIG_SYS_LSDMR_9COL  (PSDMR_PBI                      |\
 			 PSDMR_SDAM_A16_IS_A5           |\
 			 PSDMR_BSMA_A13_A15             |\
 			 PSDMR_SDA10_PBI1_A8            |\
@@ -616,53 +616,53 @@
 			 PSDMR_WRC_2C                   |\
 			 PSDMR_CL_2)
 
-#endif /* CFG_INIT_LOCAL_SDRAM */
+#endif /* CONFIG_SYS_INIT_LOCAL_SDRAM */
 
-#endif /* CFG_RAMBOOT */
+#endif /* CONFIG_SYS_RAMBOOT */
 
-#define CFG_CAN0_BASE		0xc0000000
-#define CFG_CAN1_BASE		0xc0008000
-#define CFG_FIOX_BASE		0xc0010000
-#define CFG_FDOHM_BASE		0xc0018000
-#define CFG_EXTPROM_BASE	0xc2000000
+#define CONFIG_SYS_CAN0_BASE		0xc0000000
+#define CONFIG_SYS_CAN1_BASE		0xc0008000
+#define CONFIG_SYS_FIOX_BASE		0xc0010000
+#define CONFIG_SYS_FDOHM_BASE		0xc0018000
+#define CONFIG_SYS_EXTPROM_BASE	0xc2000000
 
-#define CFG_CAN_SIZE		0x00000100
-#define CFG_FIOX_SIZE		0x00000020
-#define CFG_FDOHM_SIZE		0x00002000
-#define CFG_EXTPROM_BANK_SIZE	0x01000000
+#define CONFIG_SYS_CAN_SIZE		0x00000100
+#define CONFIG_SYS_FIOX_SIZE		0x00000020
+#define CONFIG_SYS_FDOHM_SIZE		0x00002000
+#define CONFIG_SYS_EXTPROM_BANK_SIZE	0x01000000
 
 #define EXT_EEPROM_MAX_FLASH_BANKS	0x02
 
 /* CS3 - CAN 0
  */
-#define CFG_CAN0_BR3   ((CFG_CAN0_BASE & BRx_BA_MSK)	|\
+#define CONFIG_SYS_CAN0_BR3   ((CONFIG_SYS_CAN0_BASE & BRx_BA_MSK)	|\
 			BRx_PS_8			|\
 			BRx_MS_UPMA			|\
 			BRx_V)
 
-#define CFG_CAN0_OR3   (P2SZ_TO_AM(CFG_CAN_SIZE)	|\
+#define CONFIG_SYS_CAN0_OR3   (P2SZ_TO_AM(CONFIG_SYS_CAN_SIZE)	|\
 			ORxU_BI				|\
 			ORxU_EHTR_4IDLE)
 
 /* CS4 - CAN 1
  */
-#define CFG_CAN1_BR4   ((CFG_CAN1_BASE & BRx_BA_MSK)	|\
+#define CONFIG_SYS_CAN1_BR4   ((CONFIG_SYS_CAN1_BASE & BRx_BA_MSK)	|\
 			BRx_PS_8			|\
 			BRx_MS_UPMA			|\
 			BRx_V)
 
-#define CFG_CAN1_OR4   (P2SZ_TO_AM(CFG_CAN_SIZE)	|\
+#define CONFIG_SYS_CAN1_OR4   (P2SZ_TO_AM(CONFIG_SYS_CAN_SIZE)	|\
 			ORxU_BI				|\
 			ORxU_EHTR_4IDLE)
 
 /* CS5 - Extended PROM (16MB optional)
  */
-#define CFG_EXTPROM_BR5 ((CFG_EXTPROM_BASE & BRx_BA_MSK)|\
+#define CONFIG_SYS_EXTPROM_BR5 ((CONFIG_SYS_EXTPROM_BASE & BRx_BA_MSK)|\
 			BRx_PS_32			|\
 			BRx_MS_GPCM_P			|\
 			BRx_V)
 
-#define CFG_EXTPROM_OR5 (P2SZ_TO_AM(CFG_EXTPROM_BANK_SIZE)|\
+#define CONFIG_SYS_EXTPROM_OR5 (P2SZ_TO_AM(CONFIG_SYS_EXTPROM_BANK_SIZE)|\
 			ORxG_CSNT			|\
 			ORxG_ACS_DIV4			|\
 			ORxG_SCY_5_CLK			|\
@@ -670,13 +670,13 @@
 
 /* CS6 - Extended PROM (16MB optional)
  */
-#define CFG_EXTPROM_BR6 (((CFG_EXTPROM_BASE + \
-			CFG_EXTPROM_BANK_SIZE) & BRx_BA_MSK)|\
+#define CONFIG_SYS_EXTPROM_BR6 (((CONFIG_SYS_EXTPROM_BASE + \
+			CONFIG_SYS_EXTPROM_BANK_SIZE) & BRx_BA_MSK)|\
 			BRx_PS_32			|\
 			BRx_MS_GPCM_P			|\
 			BRx_V)
 
-#define CFG_EXTPROM_OR6 (P2SZ_TO_AM(CFG_EXTPROM_BANK_SIZE)|\
+#define CONFIG_SYS_EXTPROM_OR6 (P2SZ_TO_AM(CONFIG_SYS_EXTPROM_BANK_SIZE)|\
 			ORxG_CSNT			|\
 			ORxG_ACS_DIV4			|\
 			ORxG_SCY_5_CLK			|\
@@ -684,37 +684,37 @@
 
 /* CS7 - FPGA FIOX: Glue Logic
  */
-#define CFG_FIOX_BR7   ((CFG_FIOX_BASE & BRx_BA_MSK)	|\
+#define CONFIG_SYS_FIOX_BR7   ((CONFIG_SYS_FIOX_BASE & BRx_BA_MSK)	|\
 			BRx_PS_32			|\
 			BRx_MS_GPCM_P			|\
 			BRx_V)
 
-#define CFG_FIOX_OR7   (P2SZ_TO_AM(CFG_FIOX_SIZE)	|\
+#define CONFIG_SYS_FIOX_OR7   (P2SZ_TO_AM(CONFIG_SYS_FIOX_SIZE)	|\
 			ORxG_ACS_DIV4			|\
 			ORxG_SCY_5_CLK			|\
 			ORxG_TRLX)
 
 /* CS8 - FPGA DOH Master
  */
-#define CFG_FDOHM_BR8  ((CFG_FDOHM_BASE & BRx_BA_MSK)	|\
+#define CONFIG_SYS_FDOHM_BR8  ((CONFIG_SYS_FDOHM_BASE & BRx_BA_MSK)	|\
 			BRx_PS_16			|\
 			BRx_MS_GPCM_P			|\
 			BRx_V)
 
-#define CFG_FDOHM_OR8  (P2SZ_TO_AM(CFG_FDOHM_SIZE)	|\
+#define CONFIG_SYS_FDOHM_OR8  (P2SZ_TO_AM(CONFIG_SYS_FDOHM_SIZE)	|\
 			ORxG_ACS_DIV4			|\
 			ORxG_SCY_5_CLK			|\
 			ORxG_TRLX)
 
 
 /* FPGA configuration */
-#define CFG_PD_FIOX_PROG	(1 << (31- 5))	/* PD  5 */
-#define CFG_PD_FIOX_DONE	(1 << (31-28))	/* PD 28 */
-#define CFG_PD_FIOX_INIT	(1 << (31-29))	/* PD 29 */
+#define CONFIG_SYS_PD_FIOX_PROG	(1 << (31- 5))	/* PD  5 */
+#define CONFIG_SYS_PD_FIOX_DONE	(1 << (31-28))	/* PD 28 */
+#define CONFIG_SYS_PD_FIOX_INIT	(1 << (31-29))	/* PD 29 */
 
-#define CFG_PD_FDOHM_PROG	(1 << (31- 4))	/* PD  4 */
-#define CFG_PD_FDOHM_DONE	(1 << (31-26))	/* PD 26 */
-#define CFG_PD_FDOHM_INIT	(1 << (31-27))	/* PD 27 */
+#define CONFIG_SYS_PD_FDOHM_PROG	(1 << (31- 4))	/* PD  4 */
+#define CONFIG_SYS_PD_FDOHM_DONE	(1 << (31-26))	/* PD 26 */
+#define CONFIG_SYS_PD_FDOHM_INIT	(1 << (31-27))	/* PD 27 */
 
 
 #endif	/* __CONFIG_H */
diff --git a/include/configs/SL8245.h b/include/configs/SL8245.h
index 31853c8de..876d8828a 100644
--- a/include/configs/SL8245.h
+++ b/include/configs/SL8245.h
@@ -47,7 +47,7 @@
 
 #define CONFIG_CONS_INDEX	1
 #define CONFIG_BAUDRATE		115200
-#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
 
 #define CONFIG_BOOTDELAY	5
 
@@ -74,70 +74,70 @@
 /*
  * Miscellaneous configurable options
  */
-#undef CFG_LONGHELP			/* undef to save memory		*/
-#define CFG_PROMPT	"=> "		/* Monitor Command Prompt	*/
-#define CFG_CBSIZE	256		/* Console I/O Buffer Size	*/
+#undef CONFIG_SYS_LONGHELP			/* undef to save memory		*/
+#define CONFIG_SYS_PROMPT	"=> "		/* Monitor Command Prompt	*/
+#define CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size	*/
 
 /* Print Buffer Size
  */
-#define CFG_PBSIZE	(CFG_CBSIZE + sizeof(CFG_PROMPT) + 16)
-#define CFG_MAXARGS	32		/* Max number of command args	*/
-#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size	*/
-#define CFG_LOAD_ADDR	0x00400000	/* Default load address		*/
+#define CONFIG_SYS_PBSIZE	(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
+#define CONFIG_SYS_MAXARGS	32		/* Max number of command args	*/
+#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
+#define CONFIG_SYS_LOAD_ADDR	0x00400000	/* Default load address		*/
 
 /*-----------------------------------------------------------------------
  * Start addresses for the final memory configuration
  * (Set up by the startup code)
- * Please note that CFG_SDRAM_BASE _must_ start at 0
+ * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
  */
-#define CFG_SDRAM_BASE		0x00000000
+#define CONFIG_SYS_SDRAM_BASE		0x00000000
 
-#define CFG_FLASH_BASE0_PRELIM	0xFF800000	/* FLASH bank on RCS#0 */
-#define CFG_FLASH_BASE		CFG_FLASH_BASE0_PRELIM
-#define CFG_FLASH_BANKS		{ CFG_FLASH_BASE0_PRELIM }
+#define CONFIG_SYS_FLASH_BASE0_PRELIM	0xFF800000	/* FLASH bank on RCS#0 */
+#define CONFIG_SYS_FLASH_BASE		CONFIG_SYS_FLASH_BASE0_PRELIM
+#define CONFIG_SYS_FLASH_BANKS		{ CONFIG_SYS_FLASH_BASE0_PRELIM }
 
-#define CFG_RESET_ADDRESS   0xFFF00100
+#define CONFIG_SYS_RESET_ADDRESS   0xFFF00100
 
-#define CFG_EUMB_ADDR	    0xFC000000
+#define CONFIG_SYS_EUMB_ADDR	    0xFC000000
 
-#define CFG_MONITOR_BASE    TEXT_BASE
-#define CFG_MONITOR_LEN	    (256 << 10) /* Reserve 256 kB for Monitor	*/
-#define CFG_MALLOC_LEN	    (128 << 10) /* Reserve 128 kB for malloc()	*/
+#define CONFIG_SYS_MONITOR_BASE    TEXT_BASE
+#define CONFIG_SYS_MONITOR_LEN	    (256 << 10) /* Reserve 256 kB for Monitor	*/
+#define CONFIG_SYS_MALLOC_LEN	    (128 << 10) /* Reserve 128 kB for malloc()	*/
 
-#define CFG_MEMTEST_START   0x00004000	/* memtest works on		*/
-#define CFG_MEMTEST_END	    0x02000000	/* 0 ... 32 MB in DRAM		*/
+#define CONFIG_SYS_MEMTEST_START   0x00004000	/* memtest works on		*/
+#define CONFIG_SYS_MEMTEST_END	    0x02000000	/* 0 ... 32 MB in DRAM		*/
 
 	/* Maximum amount of RAM.
 	 */
-#define CFG_MAX_RAM_SIZE    0x10000000	/* 0 .. 256 MB of (S)DRAM */
+#define CONFIG_SYS_MAX_RAM_SIZE    0x10000000	/* 0 .. 256 MB of (S)DRAM */
 
 
-#if CFG_MONITOR_BASE >= CFG_FLASH_BASE
-#undef CFG_RAMBOOT
+#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE
+#undef CONFIG_SYS_RAMBOOT
 #else
-#define CFG_RAMBOOT
+#define CONFIG_SYS_RAMBOOT
 #endif
 
 /*
  * NS16550 Configuration
  */
-#define CFG_NS16550
-#define CFG_NS16550_SERIAL
+#define CONFIG_SYS_NS16550
+#define CONFIG_SYS_NS16550_SERIAL
 
-#define CFG_NS16550_REG_SIZE	1
+#define CONFIG_SYS_NS16550_REG_SIZE	1
 
-#define CFG_NS16550_CLK		get_bus_freq(0)
+#define CONFIG_SYS_NS16550_CLK		get_bus_freq(0)
 
-#define CFG_NS16550_COM1	(CFG_EUMB_ADDR + 0x4500)
+#define CONFIG_SYS_NS16550_COM1	(CONFIG_SYS_EUMB_ADDR + 0x4500)
 
 /*-----------------------------------------------------------------------
  * Definitions for initial stack pointer and data area
  */
 
-#define CFG_GBL_DATA_SIZE      128
-#define CFG_INIT_RAM_ADDR     0x40000000
-#define CFG_INIT_RAM_END      0x1000
-#define CFG_GBL_DATA_OFFSET  (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define CONFIG_SYS_GBL_DATA_SIZE      128
+#define CONFIG_SYS_INIT_RAM_ADDR     0x40000000
+#define CONFIG_SYS_INIT_RAM_END      0x1000
+#define CONFIG_SYS_GBL_DATA_OFFSET  (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
 
 /*
  * Low Level Configuration Settings
@@ -147,40 +147,40 @@
  */
 
 #define CONFIG_SYS_CLK_FREQ  66666666	/* external frequency to pll */
-#define CFG_HZ		     1000
+#define CONFIG_SYS_HZ		     1000
 
 	/* Bit-field values for MCCR1.
 	 */
-#define CFG_ROMNAL	    0
-#define CFG_ROMFAL	    7
-#define CFG_BANK0_ROW       2
+#define CONFIG_SYS_ROMNAL	    0
+#define CONFIG_SYS_ROMFAL	    7
+#define CONFIG_SYS_BANK0_ROW       2
 
 	/* Bit-field values for MCCR2.
 	 */
-#define CFG_REFINT	    0x400	    /* Refresh interval	FIXME: was 0t430		*/
+#define CONFIG_SYS_REFINT	    0x400	    /* Refresh interval	FIXME: was 0t430		*/
 
 	/* Burst To Precharge. Bits of this value go to MCCR3 and MCCR4.
 	 */
-#define CFG_BSTOPRE	    192
+#define CONFIG_SYS_BSTOPRE	    192
 
 	/* Bit-field values for MCCR3.
 	 */
-#define CFG_REFREC	    2	    /* Refresh to activate interval */
+#define CONFIG_SYS_REFREC	    2	    /* Refresh to activate interval */
 
 	/* Bit-field values for MCCR4.
 	 */
-#define CFG_PRETOACT	    2	    /* Precharge to activate interval */
-#define CFG_ACTTOPRE	    5	    /* Activate to Precharge interval */
-#define CFG_ACTORW	    3       /* FIXME was 2 */
-#define CFG_SDMODE_CAS_LAT  3	    /* SDMODE CAS latancy */
-#define CFG_SDMODE_WRAP	    0	    /* SDMODE wrap type	*/
-#define CFG_REGISTERD_TYPE_BUFFER 1
-#define CFG_EXTROM	    1
-#define CFG_REGDIMM	    0
-
-#define CFG_ODCR		0xff	/* configures line driver impedances,	*/
+#define CONFIG_SYS_PRETOACT	    2	    /* Precharge to activate interval */
+#define CONFIG_SYS_ACTTOPRE	    5	    /* Activate to Precharge interval */
+#define CONFIG_SYS_ACTORW	    3       /* FIXME was 2 */
+#define CONFIG_SYS_SDMODE_CAS_LAT  3	    /* SDMODE CAS latancy */
+#define CONFIG_SYS_SDMODE_WRAP	    0	    /* SDMODE wrap type	*/
+#define CONFIG_SYS_REGISTERD_TYPE_BUFFER 1
+#define CONFIG_SYS_EXTROM	    1
+#define CONFIG_SYS_REGDIMM	    0
+
+#define CONFIG_SYS_ODCR		0xff	/* configures line driver impedances,	*/
 					/* see 8245 book for bit definitions	*/
-#define CFG_PGMAX		0x32	/* how long the 8245 retains the	*/
+#define CONFIG_SYS_PGMAX		0x32	/* how long the 8245 retains the	*/
 					/* currently accessed page in memory	*/
 					/* see 8245 book for details		*/
 
@@ -191,83 +191,83 @@
  * address. Refer to the MPC8240 book.
  */
 
-#define CFG_BANK0_START	    0x00000000
-#define CFG_BANK0_END	    (CFG_MAX_RAM_SIZE - 1)
-#define CFG_BANK0_ENABLE    1
-#define CFG_BANK1_START	    0x3ff00000
-#define CFG_BANK1_END	    0x3fffffff
-#define CFG_BANK1_ENABLE    0
-#define CFG_BANK2_START	    0x3ff00000
-#define CFG_BANK2_END	    0x3fffffff
-#define CFG_BANK2_ENABLE    0
-#define CFG_BANK3_START	    0x3ff00000
-#define CFG_BANK3_END	    0x3fffffff
-#define CFG_BANK3_ENABLE    0
-#define CFG_BANK4_START	    0x3ff00000
-#define CFG_BANK4_END	    0x3fffffff
-#define CFG_BANK4_ENABLE    0
-#define CFG_BANK5_START	    0x3ff00000
-#define CFG_BANK5_END	    0x3fffffff
-#define CFG_BANK5_ENABLE    0
-#define CFG_BANK6_START	    0x3ff00000
-#define CFG_BANK6_END	    0x3fffffff
-#define CFG_BANK6_ENABLE    0
-#define CFG_BANK7_START	    0x3ff00000
-#define CFG_BANK7_END	    0x3fffffff
-#define CFG_BANK7_ENABLE    0
-
-#define CFG_IBAT0L  (CFG_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
-#define CFG_IBAT0U  (CFG_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
-
-#define CFG_IBAT1L  (CFG_INIT_RAM_ADDR | BATL_PP_10 | BATL_MEMCOHERENCE)
-#define CFG_IBAT1U  (CFG_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP)
-
-#define CFG_IBAT2L  (0x80000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
-#define CFG_IBAT2U  (0x80000000 | BATU_BL_256M | BATU_VS | BATU_VP)
-
-#define CFG_IBAT3L  (0xF0000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
-#define CFG_IBAT3U  (0xF0000000 | BATU_BL_256M | BATU_VS | BATU_VP)
-
-#define CFG_DBAT0L  CFG_IBAT0L
-#define CFG_DBAT0U  CFG_IBAT0U
-#define CFG_DBAT1L  CFG_IBAT1L
-#define CFG_DBAT1U  CFG_IBAT1U
-#define CFG_DBAT2L  CFG_IBAT2L
-#define CFG_DBAT2U  CFG_IBAT2U
-#define CFG_DBAT3L  CFG_IBAT3L
-#define CFG_DBAT3U  CFG_IBAT3U
+#define CONFIG_SYS_BANK0_START	    0x00000000
+#define CONFIG_SYS_BANK0_END	    (CONFIG_SYS_MAX_RAM_SIZE - 1)
+#define CONFIG_SYS_BANK0_ENABLE    1
+#define CONFIG_SYS_BANK1_START	    0x3ff00000
+#define CONFIG_SYS_BANK1_END	    0x3fffffff
+#define CONFIG_SYS_BANK1_ENABLE    0
+#define CONFIG_SYS_BANK2_START	    0x3ff00000
+#define CONFIG_SYS_BANK2_END	    0x3fffffff
+#define CONFIG_SYS_BANK2_ENABLE    0
+#define CONFIG_SYS_BANK3_START	    0x3ff00000
+#define CONFIG_SYS_BANK3_END	    0x3fffffff
+#define CONFIG_SYS_BANK3_ENABLE    0
+#define CONFIG_SYS_BANK4_START	    0x3ff00000
+#define CONFIG_SYS_BANK4_END	    0x3fffffff
+#define CONFIG_SYS_BANK4_ENABLE    0
+#define CONFIG_SYS_BANK5_START	    0x3ff00000
+#define CONFIG_SYS_BANK5_END	    0x3fffffff
+#define CONFIG_SYS_BANK5_ENABLE    0
+#define CONFIG_SYS_BANK6_START	    0x3ff00000
+#define CONFIG_SYS_BANK6_END	    0x3fffffff
+#define CONFIG_SYS_BANK6_ENABLE    0
+#define CONFIG_SYS_BANK7_START	    0x3ff00000
+#define CONFIG_SYS_BANK7_END	    0x3fffffff
+#define CONFIG_SYS_BANK7_ENABLE    0
+
+#define CONFIG_SYS_IBAT0L  (CONFIG_SYS_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
+#define CONFIG_SYS_IBAT0U  (CONFIG_SYS_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
+
+#define CONFIG_SYS_IBAT1L  (CONFIG_SYS_INIT_RAM_ADDR | BATL_PP_10 | BATL_MEMCOHERENCE)
+#define CONFIG_SYS_IBAT1U  (CONFIG_SYS_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP)
+
+#define CONFIG_SYS_IBAT2L  (0x80000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
+#define CONFIG_SYS_IBAT2U  (0x80000000 | BATU_BL_256M | BATU_VS | BATU_VP)
+
+#define CONFIG_SYS_IBAT3L  (0xF0000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
+#define CONFIG_SYS_IBAT3U  (0xF0000000 | BATU_BL_256M | BATU_VS | BATU_VP)
+
+#define CONFIG_SYS_DBAT0L  CONFIG_SYS_IBAT0L
+#define CONFIG_SYS_DBAT0U  CONFIG_SYS_IBAT0U
+#define CONFIG_SYS_DBAT1L  CONFIG_SYS_IBAT1L
+#define CONFIG_SYS_DBAT1U  CONFIG_SYS_IBAT1U
+#define CONFIG_SYS_DBAT2L  CONFIG_SYS_IBAT2L
+#define CONFIG_SYS_DBAT2U  CONFIG_SYS_IBAT2U
+#define CONFIG_SYS_DBAT3L  CONFIG_SYS_IBAT3L
+#define CONFIG_SYS_DBAT3U  CONFIG_SYS_IBAT3U
 
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define CFG_BOOTMAPSZ	    (8 << 20)	/* Initial Memory map for Linux */
+#define CONFIG_SYS_BOOTMAPSZ	    (8 << 20)	/* Initial Memory map for Linux */
 
 /*-----------------------------------------------------------------------
  * FLASH organization
  */
-#define CFG_MAX_FLASH_BANKS	1	/* Max number of flash banks		*/
-#define CFG_MAX_FLASH_SECT	35	/* Max number of sectors per flash	*/
+#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* Max number of flash banks		*/
+#define CONFIG_SYS_MAX_FLASH_SECT	35	/* Max number of sectors per flash	*/
 
-#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms) */
-#define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms) */
+#define CONFIG_SYS_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms) */
+#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms) */
 
 
 	/* Warining: environment is not EMBEDDED in the U-Boot code.
 	 * It's stored in flash separately.
 	 */
-#define CFG_ENV_IS_IN_FLASH	    1
-#define CFG_ENV_ADDR		0xFFFF0000
-#define CFG_ENV_SIZE		0x00010000 /* Size of the Environment		*/
-#define CFG_ENV_SECT_SIZE	0x00010000 /* Size of the Environment Sector	*/
+#define CONFIG_ENV_IS_IN_FLASH	    1
+#define CONFIG_ENV_ADDR		0xFFFF0000
+#define CONFIG_ENV_SIZE		0x00010000 /* Size of the Environment		*/
+#define CONFIG_ENV_SECT_SIZE	0x00010000 /* Size of the Environment Sector	*/
 
 /*-----------------------------------------------------------------------
  * Cache Configuration
  */
-#define CFG_CACHELINE_SIZE	32
+#define CONFIG_SYS_CACHELINE_SIZE	32
 #if defined(CONFIG_CMD_KGDB)
-#  define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value	*/
+#  define CONFIG_SYS_CACHELINE_SHIFT	5	/* log base 2 of the above value	*/
 #endif
 
 /*
diff --git a/include/configs/SM850.h b/include/configs/SM850.h
index 465db4735..4c469e3ba 100644
--- a/include/configs/SM850.h
+++ b/include/configs/SM850.h
@@ -1,5 +1,5 @@
 /*
- * (C) Copyright 2000
+ * (C) Copyright 2000-2008
  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
  *
  * See file CREDITS for list of people who contributed to this
@@ -60,7 +60,7 @@
 	"bootm"
 
 #define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
-#undef	CFG_LOADS_BAUD_CHANGE		/* don't allow baudrate change	*/
+#undef	CONFIG_SYS_LOADS_BAUD_CHANGE		/* don't allow baudrate change	*/
 
 #undef	CONFIG_WATCHDOG			/* watchdog disabled		*/
 
@@ -93,25 +93,25 @@
 /*
  * Miscellaneous configurable options
  */
-#define	CFG_LONGHELP			/* undef to save memory		*/
-#define	CFG_PROMPT	"=> "		/* Monitor Command Prompt	*/
+#define	CONFIG_SYS_LONGHELP			/* undef to save memory		*/
+#define	CONFIG_SYS_PROMPT	"=> "		/* Monitor Command Prompt	*/
 #if defined(CONFIG_CMD_KGDB) && defined(KGDB_DEBUG)
-#define	CFG_CBSIZE	1024		/* Console I/O Buffer Size	*/
+#define	CONFIG_SYS_CBSIZE	1024		/* Console I/O Buffer Size	*/
 #else
-#define	CFG_CBSIZE	256		/* Console I/O Buffer Size	*/
+#define	CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size	*/
 #endif
-#define	CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define	CFG_MAXARGS	16		/* max number of command args	*/
-#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+#define	CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define	CONFIG_SYS_MAXARGS	16		/* max number of command args	*/
+#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
 
-#define CFG_MEMTEST_START	0x0400000	/* memtest works on	*/
-#define CFG_MEMTEST_END		0x0C00000	/* 4 ... 12 MB in DRAM	*/
+#define CONFIG_SYS_MEMTEST_START	0x0400000	/* memtest works on	*/
+#define CONFIG_SYS_MEMTEST_END		0x0C00000	/* 4 ... 12 MB in DRAM	*/
 
-#define	CFG_LOAD_ADDR		0x100000	/* default load address	*/
+#define	CONFIG_SYS_LOAD_ADDR		0x100000	/* default load address	*/
 
-#define	CFG_HZ		1000		/* decrementer freq: 1 ms ticks	*/
+#define	CONFIG_SYS_HZ		1000		/* decrementer freq: 1 ms ticks	*/
 
-#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
 
 /*
  * Low Level Configuration Settings
@@ -121,65 +121,70 @@
 /*-----------------------------------------------------------------------
  * Internal Memory Mapped Register
  */
-#define CFG_IMMR		0xFFF00000
+#define CONFIG_SYS_IMMR		0xFFF00000
 
 /*-----------------------------------------------------------------------
  * Definitions for initial stack pointer and data area (in DPRAM)
  */
-#define CFG_INIT_RAM_ADDR	CFG_IMMR
-#define	CFG_INIT_RAM_END	0x2F00	/* End of used area in DPRAM	*/
-#define	CFG_GBL_DATA_SIZE	64  /* size in bytes reserved for initial data */
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define	CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_IMMR
+#define	CONFIG_SYS_INIT_RAM_END	0x2F00	/* End of used area in DPRAM	*/
+#define	CONFIG_SYS_GBL_DATA_SIZE	64  /* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define	CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
 /*-----------------------------------------------------------------------
  * Start addresses for the final memory configuration
  * (Set up by the startup code)
- * Please note that CFG_SDRAM_BASE _must_ start at 0
+ * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
  */
-#define	CFG_SDRAM_BASE		0x00000000
-#define CFG_FLASH_BASE		0x40000000
+#define	CONFIG_SYS_SDRAM_BASE		0x00000000
+#define CONFIG_SYS_FLASH_BASE		0x40000000
 #if defined(DEBUG)
-#define	CFG_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor	*/
+#define	CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor	*/
 #else
-#define	CFG_MONITOR_LEN		(192 << 10)	/* Reserve 192 kB for Monitor	*/
+#define	CONFIG_SYS_MONITOR_LEN		(192 << 10)	/* Reserve 192 kB for Monitor	*/
 #endif
-#define CFG_MONITOR_BASE	CFG_FLASH_BASE
-#define	CFG_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/
+#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_FLASH_BASE
+#define	CONFIG_SYS_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/
 
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define	CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux	*/
+#define	CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux	*/
 
 /*-----------------------------------------------------------------------
  * FLASH organization
  */
-#define CFG_MAX_FLASH_BANKS	2	/* max number of memory banks		*/
-#define CFG_MAX_FLASH_SECT	67	/* max number of sectors on one chip	*/
+/* use CFI flash driver */
+#define CONFIG_SYS_FLASH_CFI		1	/* Flash is CFI conformant */
+#define CONFIG_FLASH_CFI_DRIVER	1	/* Use the common driver */
+#define CONFIG_SYS_FLASH_BANKS_LIST	{ CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE+flash_info[0].size }
+#define CONFIG_SYS_FLASH_EMPTY_INFO
+#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE	1
+#define CONFIG_SYS_MAX_FLASH_BANKS	2	/* max number of memory banks		*/
+#define CONFIG_SYS_MAX_FLASH_SECT	71	/* max number of sectors on one chip */
 
-#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
-#define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
+#define	CONFIG_ENV_IS_IN_FLASH	1
+#define	CONFIG_ENV_OFFSET	0x8000	/*   Offset   of Environment Sector	*/
+#define	CONFIG_ENV_SIZE		0x4000	/* Total Size of Environment Sector	*/
 
-#define	CFG_ENV_IS_IN_FLASH	1
-#define	CFG_ENV_OFFSET		0x8000	/*   Offset   of Environment Sector	*/
-#define	CFG_ENV_SIZE		0x4000	/* Total Size of Environment Sector	*/
+#define CONFIG_MISC_INIT_R		/* Make sure to remap flashes correctly */
 
 /*-----------------------------------------------------------------------
  * Hardware Information Block
  */
-#define CFG_HWINFO_OFFSET	0x0003FFC0	/* offset of HW Info block */
-#define CFG_HWINFO_SIZE		0x00000040	/* size   of HW Info block */
-#define CFG_HWINFO_MAGIC	0x54514D38	/* 'TQM8' */
+#define CONFIG_SYS_HWINFO_OFFSET	0x0003FFC0	/* offset of HW Info block */
+#define CONFIG_SYS_HWINFO_SIZE		0x00000040	/* size   of HW Info block */
+#define CONFIG_SYS_HWINFO_MAGIC	0x54514D38	/* 'TQM8' */
 
 /*-----------------------------------------------------------------------
  * Cache Configuration
  */
-#define CFG_CACHELINE_SIZE	16	/* For all MPC8xx CPUs			*/
+#define CONFIG_SYS_CACHELINE_SIZE	16	/* For all MPC8xx CPUs			*/
 #if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT	4	/* log base 2 of the above value	*/
+#define CONFIG_SYS_CACHELINE_SHIFT	4	/* log base 2 of the above value	*/
 #endif
 
 /*-----------------------------------------------------------------------
@@ -189,10 +194,10 @@
  * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze
  */
 #if defined(CONFIG_WATCHDOG)
-#define CFG_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
+#define CONFIG_SYS_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
 			 SYPCR_SWE  | SYPCR_SWRI| SYPCR_SWP)
 #else
-#define CFG_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
+#define CONFIG_SYS_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
 #endif
 
 /*-----------------------------------------------------------------------
@@ -201,9 +206,9 @@
  * PCMCIA config., multi-function pin tri-state
  */
 #ifndef CONFIG_CAN_DRIVER
-#define CFG_SIUMCR	(SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_MLRC01)
+#define CONFIG_SYS_SIUMCR	(SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_MLRC01)
 #else	/* we must activate GPL5 in the SIUMCR for CAN */
-#define CFG_SIUMCR	(SIUMCR_DBGC11 | SIUMCR_DBPC00 | SIUMCR_MLRC01)
+#define CONFIG_SYS_SIUMCR	(SIUMCR_DBGC11 | SIUMCR_DBPC00 | SIUMCR_MLRC01)
 #endif	/* CONFIG_CAN_DRIVER */
 
 /*-----------------------------------------------------------------------
@@ -211,20 +216,20 @@
  *-----------------------------------------------------------------------
  * Clear Reference Interrupt Status, Timebase freezing enabled
  */
-#define CFG_TBSCR	(TBSCR_REFA | TBSCR_REFB | TBSCR_TBF)
+#define CONFIG_SYS_TBSCR	(TBSCR_REFA | TBSCR_REFB | TBSCR_TBF)
 
 /*-----------------------------------------------------------------------
  * RTCSC - Real-Time Clock Status and Control Register		11-27
  *-----------------------------------------------------------------------
  */
-#define CFG_RTCSC	(RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE)
+#define CONFIG_SYS_RTCSC	(RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE)
 
 /*-----------------------------------------------------------------------
  * PISCR - Periodic Interrupt Status and Control		11-31
  *-----------------------------------------------------------------------
  * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
  */
-#define CFG_PISCR	(PISCR_PS | PISCR_PITF)
+#define CONFIG_SYS_PISCR	(PISCR_PS | PISCR_PITF)
 
 /*-----------------------------------------------------------------------
  * PLPRCR - PLL, Low-Power, and Reset Control Register		15-30
@@ -235,10 +240,10 @@
  * If this is a 80 MHz CPU, set PLL multiplication factor to 5 (5*16=80)!
  */
 #ifdef TQM8xxL_80MHz	/* for 80 MHz, we use a 16 MHz clock * 5 */
-#define CFG_PLPRCR							\
+#define CONFIG_SYS_PLPRCR							\
 		( (5-1)<<PLPRCR_MF_SHIFT | PLPRCR_TEXPS | PLPRCR_TMIST )
 #else
-#define CFG_PLPRCR	(PLPRCR_SPLSS | PLPRCR_TEXPS | PLPRCR_TMIST)
+#define CONFIG_SYS_PLPRCR	(PLPRCR_SPLSS | PLPRCR_TEXPS | PLPRCR_TMIST)
 #endif	/* TQM8xxL_80MHz */
 
 /*-----------------------------------------------------------------------
@@ -249,12 +254,12 @@
  */
 #define SCCR_MASK	SCCR_EBDF11
 #ifdef TQM8xxL_80MHz	/* for 80 MHz, we use a 16 MHz clock * 5 */
-#define CFG_SCCR	(/* SCCR_TBS  | */ \
+#define CONFIG_SYS_SCCR	(/* SCCR_TBS  | */ \
 			 SCCR_COM00   | SCCR_DFSYNC00 | SCCR_DFBRG00  | \
 			 SCCR_DFNL000 | SCCR_DFNH000  | SCCR_DFLCD000 | \
 			 SCCR_DFALCD00)
 #else			/* up to 50 MHz we use a 1:1 clock */
-#define CFG_SCCR	(SCCR_TBS     | \
+#define CONFIG_SYS_SCCR	(SCCR_TBS     | \
 			 SCCR_COM00   | SCCR_DFSYNC00 | SCCR_DFBRG00  | \
 			 SCCR_DFNL000 | SCCR_DFNH000  | SCCR_DFLCD000 | \
 			 SCCR_DFALCD00)
@@ -265,21 +270,21 @@
  *-----------------------------------------------------------------------
  *
  */
-#define CFG_PCMCIA_MEM_ADDR	(0xE0000000)
-#define CFG_PCMCIA_MEM_SIZE	( 64 << 20 )
-#define CFG_PCMCIA_DMA_ADDR	(0xE4000000)
-#define CFG_PCMCIA_DMA_SIZE	( 64 << 20 )
-#define CFG_PCMCIA_ATTRB_ADDR	(0xE8000000)
-#define CFG_PCMCIA_ATTRB_SIZE	( 64 << 20 )
-#define CFG_PCMCIA_IO_ADDR	(0xEC000000)
-#define CFG_PCMCIA_IO_SIZE	( 64 << 20 )
+#define CONFIG_SYS_PCMCIA_MEM_ADDR	(0xE0000000)
+#define CONFIG_SYS_PCMCIA_MEM_SIZE	( 64 << 20 )
+#define CONFIG_SYS_PCMCIA_DMA_ADDR	(0xE4000000)
+#define CONFIG_SYS_PCMCIA_DMA_SIZE	( 64 << 20 )
+#define CONFIG_SYS_PCMCIA_ATTRB_ADDR	(0xE8000000)
+#define CONFIG_SYS_PCMCIA_ATTRB_SIZE	( 64 << 20 )
+#define CONFIG_SYS_PCMCIA_IO_ADDR	(0xEC000000)
+#define CONFIG_SYS_PCMCIA_IO_SIZE	( 64 << 20 )
 
 /*-----------------------------------------------------------------------
  *
  *-----------------------------------------------------------------------
  *
  */
-#define CFG_DER	0
+#define CONFIG_SYS_DER	0
 
 /*
  * Init Memory Controller:
@@ -294,20 +299,20 @@
  * restrict access enough to keep SRAM working (if any)
  * but not too much to meddle with FLASH accesses
  */
-#define CFG_REMAP_OR_AM		0x80000000	/* OR addr mask */
-#define CFG_PRELIM_OR_AM	0xE0000000	/* OR addr mask */
+#define CONFIG_SYS_REMAP_OR_AM		0x80000000	/* OR addr mask */
+#define CONFIG_SYS_PRELIM_OR_AM	0xE0000000	/* OR addr mask */
 
 /* FLASH timing: ACS = 11, TRLX = 0, CSNT = 1, SCY = 5, EHTR = 1	*/
-#define CFG_OR_TIMING_FLASH	(OR_CSNT_SAM  | OR_ACS_DIV2 | OR_BI | \
+#define CONFIG_SYS_OR_TIMING_FLASH	(OR_CSNT_SAM  | OR_ACS_DIV2 | OR_BI | \
 				 OR_SCY_5_CLK | OR_EHTR)
 
-#define CFG_OR0_REMAP	(CFG_REMAP_OR_AM  | CFG_OR_TIMING_FLASH)
-#define CFG_OR0_PRELIM	(CFG_PRELIM_OR_AM | CFG_OR_TIMING_FLASH)
-#define CFG_BR0_PRELIM	((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_V )
+#define CONFIG_SYS_OR0_REMAP	(CONFIG_SYS_REMAP_OR_AM  | CONFIG_SYS_OR_TIMING_FLASH)
+#define CONFIG_SYS_OR0_PRELIM	(CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_FLASH)
+#define CONFIG_SYS_BR0_PRELIM	((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_V )
 
-#define CFG_OR1_REMAP	CFG_OR0_REMAP
-#define CFG_OR1_PRELIM	CFG_OR0_PRELIM
-#define CFG_BR1_PRELIM	((FLASH_BASE1_PRELIM & BR_BA_MSK) | BR_V )
+#define CONFIG_SYS_OR1_REMAP	CONFIG_SYS_OR0_REMAP
+#define CONFIG_SYS_OR1_PRELIM	CONFIG_SYS_OR0_PRELIM
+#define CONFIG_SYS_BR1_PRELIM	((FLASH_BASE1_PRELIM & BR_BA_MSK) | BR_V )
 
 /*
  * BR2/3 and OR2/3 (SDRAM)
@@ -318,19 +323,19 @@
 #define	SDRAM_MAX_SIZE		0x04000000	/* max 64 MB per bank	*/
 
 /* SDRAM timing: Multiplexed addresses, GPL5 output to GPL5_A (don't care)	*/
-#define CFG_OR_TIMING_SDRAM	0x00000A00
+#define CONFIG_SYS_OR_TIMING_SDRAM	0x00000A00
 
-#define CFG_OR2_PRELIM	(CFG_PRELIM_OR_AM | CFG_OR_TIMING_SDRAM )
-#define CFG_BR2_PRELIM	((SDRAM_BASE2_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
+#define CONFIG_SYS_OR2_PRELIM	(CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_SDRAM )
+#define CONFIG_SYS_BR2_PRELIM	((SDRAM_BASE2_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
 
 #ifndef	CONFIG_CAN_DRIVER
-#define	CFG_OR3_PRELIM	CFG_OR2_PRELIM
-#define CFG_BR3_PRELIM	((SDRAM_BASE3_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
+#define	CONFIG_SYS_OR3_PRELIM	CONFIG_SYS_OR2_PRELIM
+#define CONFIG_SYS_BR3_PRELIM	((SDRAM_BASE3_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
 #else	/* CAN uses CS3#, so we can have only one SDRAM bank anyway */
-#define CFG_CAN_BASE		0xC0000000	/* CAN mapped at 0xC0000000	*/
-#define CFG_CAN_OR_AM		0xFFFF8000	/* 32 kB address mask		*/
-#define CFG_OR3_CAN		(CFG_CAN_OR_AM | OR_G5LA | OR_BI)
-#define CFG_BR3_CAN		((CFG_CAN_BASE & BR_BA_MSK) | \
+#define CONFIG_SYS_CAN_BASE		0xC0000000	/* CAN mapped at 0xC0000000	*/
+#define CONFIG_SYS_CAN_OR_AM		0xFFFF8000	/* 32 kB address mask		*/
+#define CONFIG_SYS_OR3_CAN		(CONFIG_SYS_CAN_OR_AM | OR_G5LA | OR_BI)
+#define CONFIG_SYS_BR3_CAN		((CONFIG_SYS_CAN_BASE & BR_BA_MSK) | \
 					BR_PS_8 | BR_MS_UPMB | BR_V )
 #endif	/* CONFIG_CAN_DRIVER */
 
@@ -339,26 +344,26 @@
  */
 
 /* periodic timer for refresh */
-#define CFG_MAMR_PTA	97		/* start with divider for 100 MHz	*/
+#define CONFIG_SYS_MAMR_PTA	97		/* start with divider for 100 MHz	*/
 
 /* refresh rate 15.6 us (= 64 ms / 4K = 62.4 / quad bursts) for <= 128 MBit	*/
-#define CFG_MPTPR_2BK_4K	MPTPR_PTP_DIV16		/* setting for 2 banks	*/
-#define CFG_MPTPR_1BK_4K	MPTPR_PTP_DIV32		/* setting for 1 bank	*/
+#define CONFIG_SYS_MPTPR_2BK_4K	MPTPR_PTP_DIV16		/* setting for 2 banks	*/
+#define CONFIG_SYS_MPTPR_1BK_4K	MPTPR_PTP_DIV32		/* setting for 1 bank	*/
 
 /* refresh rate 7.8 us (= 64 ms / 8K = 31.2 / quad bursts) for 256 MBit		*/
-#define CFG_MPTPR_2BK_8K	MPTPR_PTP_DIV8		/* setting for 2 banks	*/
-#define CFG_MPTPR_1BK_8K	MPTPR_PTP_DIV16		/* setting for 1 bank	*/
+#define CONFIG_SYS_MPTPR_2BK_8K	MPTPR_PTP_DIV8		/* setting for 2 banks	*/
+#define CONFIG_SYS_MPTPR_1BK_8K	MPTPR_PTP_DIV16		/* setting for 1 bank	*/
 
 /*
  * MAMR settings for SDRAM
  */
 
 /* 8 column SDRAM */
-#define CFG_MAMR_8COL	((CFG_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
+#define CONFIG_SYS_MAMR_8COL	((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
 			 MAMR_AMA_TYPE_0 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A11 |	\
 			 MAMR_RLFA_1X	 | MAMR_WLFA_1X	   | MAMR_TLFA_4X)
 /* 9 column SDRAM */
-#define CFG_MAMR_9COL	((CFG_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
+#define CONFIG_SYS_MAMR_9COL	((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
 			 MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 |	\
 			 MAMR_RLFA_1X	 | MAMR_WLFA_1X	   | MAMR_TLFA_4X)
 
diff --git a/include/configs/SMN42.h b/include/configs/SMN42.h
index a5d3d6958..45e6a58d9 100644
--- a/include/configs/SMN42.h
+++ b/include/configs/SMN42.h
@@ -49,8 +49,8 @@
 /*
  * Size of malloc() pool
  */
-#define CFG_MALLOC_LEN		(CFG_ENV_SIZE + 128*1024)
-#define CFG_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
+#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + 128*1024)
+#define CONFIG_SYS_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
 
 /*
  * Hardware drivers
@@ -80,13 +80,13 @@
 #undef	CONFIG_HARD_I2C			/* I2C with hardware support	*/
 #define CONFIG_SOFT_I2C		1	/* I2C bit-banged		*/
 /* this would be 0xAE if E0, E1 and E2 were pulled high */
-#define CFG_I2C_SLAVE		0xA0
-#define CFG_I2C_EEPROM_ADDR	(0xA0 >> 1)
-#define CFG_I2C_EEPROM_ADDR_LEN 2 /* 16 bit address */
-#define CFG_EEPROM_PAGE_WRITE_BITS 6 /* 64 bytes per write */
-#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 20
+#define CONFIG_SYS_I2C_SLAVE		0xA0
+#define CONFIG_SYS_I2C_EEPROM_ADDR	(0xA0 >> 1)
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 /* 16 bit address */
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 6 /* 64 bytes per write */
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 20
 /* not used but required by devices.c */
-#define CFG_I2C_SPEED 10000
+#define CONFIG_SYS_I2C_SPEED 10000
 
 #ifdef CONFIG_SOFT_I2C
 /*
@@ -129,26 +129,26 @@
 /*
  * Miscellaneous configurable options
  */
-#define	CFG_LONGHELP				/* undef to save memory		*/
-#define	CFG_PROMPT		"SMN42 # " /* Monitor Command Prompt	*/
-#define	CFG_CBSIZE		256		/* Console I/O Buffer Size	*/
-#define	CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define	CFG_MAXARGS		16		/* max number of command args	*/
-#define CFG_BARGSIZE		CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+#define	CONFIG_SYS_LONGHELP				/* undef to save memory		*/
+#define	CONFIG_SYS_PROMPT		"SMN42 # " /* Monitor Command Prompt	*/
+#define	CONFIG_SYS_CBSIZE		256		/* Console I/O Buffer Size	*/
+#define	CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define	CONFIG_SYS_MAXARGS		16		/* max number of command args	*/
+#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
 
-#define CFG_MEMTEST_START	0x81800000	/* memtest works on	*/
-#define CFG_MEMTEST_END		0x83000000	/* 24 MB in SRAM	*/
+#define CONFIG_SYS_MEMTEST_START	0x81800000	/* memtest works on	*/
+#define CONFIG_SYS_MEMTEST_END		0x83000000	/* 24 MB in SRAM	*/
 
-#undef	CFG_CLKS_IN_HZ		/* everything, incl board info, in Hz */
+#undef	CONFIG_SYS_CLKS_IN_HZ		/* everything, incl board info, in Hz */
 
-#define	CFG_LOAD_ADDR		0x81000000	/* default load address	*/
+#define	CONFIG_SYS_LOAD_ADDR		0x81000000	/* default load address	*/
 						/* for uClinux img is here*/
 
-#define CFG_SYS_CLK_FREQ	58982400	/* Hz */
-#define	CFG_HZ			2048		/* decrementer freq in Hz */
+#define CONFIG_SYS_SYS_CLK_FREQ	58982400	/* Hz */
+#define	CONFIG_SYS_HZ			2048		/* decrementer freq in Hz */
 
 						/* valid baudrates */
-#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
 
 /*-----------------------------------------------------------------------
  * Stack sizes
@@ -177,24 +177,24 @@
  */
 
 /*
- * The first entry in CFG_FLASH_BANKS_LIST is a dummy, but it must be present.
+ * The first entry in CONFIG_SYS_FLASH_BANKS_LIST is a dummy, but it must be present.
  */
-#define CFG_FLASH_BANKS_LIST	{ 0, PHYS_FLASH_1 }
-#define CFG_FLASH_ADDR0			0x555
-#define CFG_FLASH_ADDR1			0x2AA
-#define CFG_FLASH_ERASE_TOUT	16384	/* Timeout for Flash Erase (in ms) */
-#define CFG_FLASH_WRITE_TOUT	5	/* Timeout for Flash Write (in ms) */
+#define CONFIG_SYS_FLASH_BANKS_LIST	{ 0, PHYS_FLASH_1 }
+#define CONFIG_SYS_FLASH_ADDR0			0x555
+#define CONFIG_SYS_FLASH_ADDR1			0x2AA
+#define CONFIG_SYS_FLASH_ERASE_TOUT	16384	/* Timeout for Flash Erase (in ms) */
+#define CONFIG_SYS_FLASH_WRITE_TOUT	5	/* Timeout for Flash Write (in ms) */
 
-#define CFG_MAX_FLASH_SECT	128  /* max number of sectors on one chip    */
+#define CONFIG_SYS_MAX_FLASH_SECT	128  /* max number of sectors on one chip    */
 
-#define CFG_MAX_FLASH_BANKS	2	/* max number of memory banks		*/
+#define CONFIG_SYS_MAX_FLASH_BANKS	2	/* max number of memory banks		*/
 
-#define	CFG_ENV_IS_IN_FLASH	1
+#define	CONFIG_ENV_IS_IN_FLASH	1
 /* The Environment Sector is in the CPU-internal flash */
-#define CFG_FLASH_BASE		0
-#define CFG_ENV_OFFSET		0x3C000
-#define CFG_ENV_ADDR		(CFG_FLASH_BASE + CFG_ENV_OFFSET)
-#define CFG_ENV_SIZE		0x2000 /* Total Size of Environment Sector	*/
+#define CONFIG_SYS_FLASH_BASE		0
+#define CONFIG_ENV_OFFSET		0x3C000
+#define CONFIG_ENV_ADDR		(CONFIG_SYS_FLASH_BASE + CONFIG_ENV_OFFSET)
+#define CONFIG_ENV_SIZE		0x2000 /* Total Size of Environment Sector	*/
 
 #define CONFIG_CMDLINE_TAG
 #define CONFIG_SETUP_MEMORY_TAGS
diff --git a/include/configs/SPD823TS.h b/include/configs/SPD823TS.h
index 395c7a1e7..920134699 100644
--- a/include/configs/SPD823TS.h
+++ b/include/configs/SPD823TS.h
@@ -55,7 +55,7 @@
 				"nfsaddrs=10.0.0.99:10.0.0.2"
 
 #define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
-#undef	CFG_LOADS_BAUD_CHANGE		/* don't allow baudrate change	*/
+#undef	CONFIG_SYS_LOADS_BAUD_CHANGE		/* don't allow baudrate change	*/
 
 #undef	CONFIG_WATCHDOG			/* watchdog disabled		*/
 
@@ -94,29 +94,29 @@
 /*
  * Miscellaneous configurable options
  */
-#define CFG_LONGHELP			/* undef to save memory		*/
-#define CFG_PROMPT	"=> "		/* Monitor Command Prompt	*/
+#define CONFIG_SYS_LONGHELP			/* undef to save memory		*/
+#define CONFIG_SYS_PROMPT	"=> "		/* Monitor Command Prompt	*/
 #if defined(CONFIG_CMD_KGDB)
-#define CFG_CBSIZE	1024		/* Console I/O Buffer Size	*/
+#define CONFIG_SYS_CBSIZE	1024		/* Console I/O Buffer Size	*/
 #else
-#define CFG_CBSIZE	256		/* Console I/O Buffer Size	*/
+#define CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size	*/
 #endif
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define CFG_MAXARGS	16		/* max number of command args	*/
-#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS	16		/* max number of command args	*/
+#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
 
-#define CFG_MEMTEST_START	0x00100000	/* memtest works on	*/
-#define CFG_MEMTEST_END		0x00F00000	/* 1 ... 15MB in DRAM	*/
+#define CONFIG_SYS_MEMTEST_START	0x00100000	/* memtest works on	*/
+#define CONFIG_SYS_MEMTEST_END		0x00F00000	/* 1 ... 15MB in DRAM	*/
 
-#define CFG_LOAD_ADDR		0x00100000	/* default load address */
+#define CONFIG_SYS_LOAD_ADDR		0x00100000	/* default load address */
 
-#define CFG_PIO_MODE		0	/* IDE interface in PIO Mode 0	*/
+#define CONFIG_SYS_PIO_MODE		0	/* IDE interface in PIO Mode 0	*/
 
-#define CFG_PC_IDE_RESET	((ushort)0x0008)	/* PC 12	*/
+#define CONFIG_SYS_PC_IDE_RESET	((ushort)0x0008)	/* PC 12	*/
 
-#define	CFG_HZ		1000		/* decrementer freq: 1 ms ticks	*/
+#define	CONFIG_SYS_HZ		1000		/* decrementer freq: 1 ms ticks	*/
 
-#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
 
 /*
  * Low Level Configuration Settings
@@ -126,56 +126,56 @@
 /*-----------------------------------------------------------------------
  * Internal Memory Mapped Register
  */
-#define CFG_IMMR		0xFFF00000 /* was: 0xFF000000 */
+#define CONFIG_SYS_IMMR		0xFFF00000 /* was: 0xFF000000 */
 
 /*-----------------------------------------------------------------------
  * Definitions for initial stack pointer and data area (in DPRAM)
  */
-#define CFG_INIT_RAM_ADDR	CFG_IMMR
-#define CFG_INIT_RAM_END	0x2F00	/* End of used area in DPRAM	*/
-#define CFG_GBL_DATA_SIZE	64  /* size in bytes reserved for initial data */
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_IMMR
+#define CONFIG_SYS_INIT_RAM_END	0x2F00	/* End of used area in DPRAM	*/
+#define CONFIG_SYS_GBL_DATA_SIZE	64  /* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
 /*-----------------------------------------------------------------------
  * Start addresses for the final memory configuration
  * (Set up by the startup code)
- * Please note that CFG_SDRAM_BASE _must_ start at 0
+ * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
  */
-#define CFG_SDRAM_BASE		0x00000000
-#define CFG_FLASH_BASE		0xFF000000
+#define CONFIG_SYS_SDRAM_BASE		0x00000000
+#define CONFIG_SYS_FLASH_BASE		0xFF000000
 #ifdef	DEBUG
-#define CFG_MONITOR_LEN		(512 << 10)	/* Reserve 512 kB for Monitor	*/
+#define CONFIG_SYS_MONITOR_LEN		(512 << 10)	/* Reserve 512 kB for Monitor	*/
 #else
-#define CFG_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor	*/
+#define CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor	*/
 #endif
-#define CFG_MONITOR_BASE	CFG_FLASH_BASE
-#define CFG_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/
+#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_FLASH_BASE
+#define CONFIG_SYS_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/
 
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
+#define CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
 /*-----------------------------------------------------------------------
  * FLASH organization
  */
-#define CFG_MAX_FLASH_BANKS	0	/* max number of memory banks		*/
-#define CFG_MAX_FLASH_SECT	0	/* max number of sectors on one chip	*/
+#define CONFIG_SYS_MAX_FLASH_BANKS	0	/* max number of memory banks		*/
+#define CONFIG_SYS_MAX_FLASH_SECT	0	/* max number of sectors on one chip	*/
 
-#define CFG_FLASH_ERASE_TOUT	0	/* Timeout for Flash Erase (in ms)	*/
-#define CFG_FLASH_WRITE_TOUT	0	/* Timeout for Flash Write (in ms)	*/
+#define CONFIG_SYS_FLASH_ERASE_TOUT	0	/* Timeout for Flash Erase (in ms)	*/
+#define CONFIG_SYS_FLASH_WRITE_TOUT	0	/* Timeout for Flash Write (in ms)	*/
 
-#define	CFG_ENV_IS_IN_FLASH	1
-#define CFG_ENV_OFFSET		0x8000	/*   Offset   of Environment Sector	*/
-#define CFG_ENV_SIZE		0x0800	/* Total Size of Environment Sector	*/
+#define	CONFIG_ENV_IS_IN_FLASH	1
+#define CONFIG_ENV_OFFSET		0x8000	/*   Offset   of Environment Sector	*/
+#define CONFIG_ENV_SIZE		0x0800	/* Total Size of Environment Sector	*/
 /*-----------------------------------------------------------------------
  * Cache Configuration
  */
-#define CFG_CACHELINE_SIZE	16	/* For all MPC8xx CPUs			*/
+#define CONFIG_SYS_CACHELINE_SIZE	16	/* For all MPC8xx CPUs			*/
 #if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT	4	/* log base 2 of the above value	*/
+#define CONFIG_SYS_CACHELINE_SHIFT	4	/* log base 2 of the above value	*/
 #endif
 
 /*-----------------------------------------------------------------------
@@ -185,10 +185,10 @@
  * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze
  */
 #if defined(CONFIG_WATCHDOG)
-#define CFG_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
+#define CONFIG_SYS_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
 			 SYPCR_SWE  | SYPCR_SWRI| SYPCR_SWP)
 #else
-#define CFG_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
+#define CONFIG_SYS_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
 #endif
 
 /*-----------------------------------------------------------------------
@@ -197,21 +197,21 @@
  * PCMCIA config., multi-function pin tri-state
  */
 /* 0x00000040 */
-#define CFG_SIUMCR	(SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_MLRC00 | SIUMCR_GB5E)
+#define CONFIG_SYS_SIUMCR	(SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_MLRC00 | SIUMCR_GB5E)
 
 /*-----------------------------------------------------------------------
  * TBSCR - Time Base Status and Control				11-26
  *-----------------------------------------------------------------------
  * Clear Reference Interrupt Status, Timebase freezing enabled
  */
-#define CFG_TBSCR	(TBSCR_REFA | TBSCR_REFB | TBSCR_TBF)
+#define CONFIG_SYS_TBSCR	(TBSCR_REFA | TBSCR_REFB | TBSCR_TBF)
 
 /*-----------------------------------------------------------------------
  * PISCR - Periodic Interrupt Status and Control		11-31
  *-----------------------------------------------------------------------
  * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
  */
-#define CFG_PISCR	(PISCR_PS | PISCR_PITF)
+#define CONFIG_SYS_PISCR	(PISCR_PS | PISCR_PITF)
 
 /*-----------------------------------------------------------------------
  * PLPRCR - PLL, Low-Power, and Reset Control Register		15-30
@@ -220,7 +220,7 @@
  * interrupt status bit, set PLL multiplication factor !
  */
 /* 0x00b0c0c0 */
-#define CFG_PLPRCR							\
+#define CONFIG_SYS_PLPRCR							\
 		(	(11 << PLPRCR_MF_SHIFT) |			\
 			PLPRCR_SPLSS | PLPRCR_TEXPS | /*PLPRCR_TMIST|*/ \
 			/*PLPRCR_CSRC|*/ PLPRCR_LPM_NORMAL |		\
@@ -235,7 +235,7 @@
  */
 #define SCCR_MASK	SCCR_EBDF11
 /* 0x01800014 */
-#define CFG_SCCR	(SCCR_COM00	| /*SCCR_TBS|*/		\
+#define CONFIG_SYS_SCCR	(SCCR_COM00	| /*SCCR_TBS|*/		\
 			 SCCR_RTDIV	|   SCCR_RTSEL	  |	\
 			 /*SCCR_CRQEN|*/  /*SCCR_PRQEN|*/	\
 			 SCCR_EBDF00	|   SCCR_DFSYNC00 |	\
@@ -248,7 +248,7 @@
  *-----------------------------------------------------------------------
  */
 /* 0x00C3 */
-#define CFG_RTCSC	(RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE)
+#define CONFIG_SYS_RTCSC	(RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE)
 
 
 /*-----------------------------------------------------------------------
@@ -256,46 +256,46 @@
  *-----------------------------------------------------------------------
  */
 /* TIMEP=2 */
-#define CFG_RCCR 0x0200
+#define CONFIG_SYS_RCCR 0x0200
 
 /*-----------------------------------------------------------------------
  * RMDS - RISC Microcode Development Support Control Register
  *-----------------------------------------------------------------------
  */
-#define CFG_RMDS 0
+#define CONFIG_SYS_RMDS 0
 
 /*-----------------------------------------------------------------------
  * SDSR - SDMA Status Register
  *-----------------------------------------------------------------------
  */
-#define CFG_SDSR ((u_char)0x83)
+#define CONFIG_SYS_SDSR ((u_char)0x83)
 
 /*-----------------------------------------------------------------------
  * SDMR - SDMA Mask Register
  *-----------------------------------------------------------------------
  */
-#define CFG_SDMR ((u_char)0x00)
+#define CONFIG_SYS_SDMR ((u_char)0x00)
 
 /*-----------------------------------------------------------------------
  *
  * Interrupt Levels
  *-----------------------------------------------------------------------
  */
-#define CFG_CPM_INTERRUPT	13	/* SIU_LEVEL6	*/
+#define CONFIG_SYS_CPM_INTERRUPT	13	/* SIU_LEVEL6	*/
 
 /*-----------------------------------------------------------------------
  * PCMCIA stuff
  *-----------------------------------------------------------------------
  *
  */
-#define CFG_PCMCIA_MEM_ADDR	(0xE0000000)
-#define CFG_PCMCIA_MEM_SIZE	( 64 << 20 )
-#define CFG_PCMCIA_DMA_ADDR	(0xE4000000)
-#define CFG_PCMCIA_DMA_SIZE	( 64 << 20 )
-#define CFG_PCMCIA_ATTRB_ADDR	(0xE8000000)
-#define CFG_PCMCIA_ATTRB_SIZE	( 64 << 20 )
-#define CFG_PCMCIA_IO_ADDR	(0xEC000000)
-#define CFG_PCMCIA_IO_SIZE	( 64 << 20 )
+#define CONFIG_SYS_PCMCIA_MEM_ADDR	(0xE0000000)
+#define CONFIG_SYS_PCMCIA_MEM_SIZE	( 64 << 20 )
+#define CONFIG_SYS_PCMCIA_DMA_ADDR	(0xE4000000)
+#define CONFIG_SYS_PCMCIA_DMA_SIZE	( 64 << 20 )
+#define CONFIG_SYS_PCMCIA_ATTRB_ADDR	(0xE8000000)
+#define CONFIG_SYS_PCMCIA_ATTRB_SIZE	( 64 << 20 )
+#define CONFIG_SYS_PCMCIA_IO_ADDR	(0xEC000000)
+#define CONFIG_SYS_PCMCIA_IO_SIZE	( 64 << 20 )
 
 /*-----------------------------------------------------------------------
  * IDE/ATA stuff
@@ -305,23 +305,23 @@
 #define CONFIG_IDE_LED		1	/* LED   for ide supported	*/
 #define CONFIG_IDE_RESET	1	/* reset for ide supported	*/
 
-#define CFG_IDE_MAXBUS		2	/* max. 2 IDE busses		*/
-#define CFG_IDE_MAXDEVICE	(CFG_IDE_MAXBUS*2) /* max. 2 drives per IDE bus */
+#define CONFIG_SYS_IDE_MAXBUS		2	/* max. 2 IDE busses		*/
+#define CONFIG_SYS_IDE_MAXDEVICE	(CONFIG_SYS_IDE_MAXBUS*2) /* max. 2 drives per IDE bus */
 
-#define CFG_ATA_BASE_ADDR	0xFE100000
-#define CFG_ATA_IDE0_OFFSET	0x0000
-#define CFG_ATA_IDE1_OFFSET	0x0C00
+#define CONFIG_SYS_ATA_BASE_ADDR	0xFE100000
+#define CONFIG_SYS_ATA_IDE0_OFFSET	0x0000
+#define CONFIG_SYS_ATA_IDE1_OFFSET	0x0C00
 
-#define CFG_ATA_DATA_OFFSET	0x0000	/* Offset for data I/O			*/
-#define CFG_ATA_REG_OFFSET	0x0080	/* Offset for normal register accesses	*/
-#define CFG_ATA_ALT_OFFSET	0x0100	/* Offset for alternate registers	*/
+#define CONFIG_SYS_ATA_DATA_OFFSET	0x0000	/* Offset for data I/O			*/
+#define CONFIG_SYS_ATA_REG_OFFSET	0x0080	/* Offset for normal register accesses	*/
+#define CONFIG_SYS_ATA_ALT_OFFSET	0x0100	/* Offset for alternate registers	*/
 
 /*-----------------------------------------------------------------------
  *
  *-----------------------------------------------------------------------
  *
  */
-#define CFG_DER 0
+#define CONFIG_SYS_DER 0
 
 /*
  * Init Memory Controller:
@@ -337,22 +337,22 @@
  * but not too much to meddle with FLASH accesses
  */
 /* EPROMs are 512kb */
-#define CFG_REMAP_OR_AM		0xFFF80000	/* OR addr mask */
-#define CFG_PRELIM_OR_AM	0xFFF80000	/* OR addr mask */
+#define CONFIG_SYS_REMAP_OR_AM		0xFFF80000	/* OR addr mask */
+#define CONFIG_SYS_PRELIM_OR_AM	0xFFF80000	/* OR addr mask */
 
 /* FLASH timing: ACS = 11, TRLX = 0, CSNT = 1, SCY = 5, EHTR = 1	*/
-#define CFG_OR_TIMING_FLASH	(/* OR_CSNT_SAM | */ OR_ACS_DIV4 | OR_BI | \
+#define CONFIG_SYS_OR_TIMING_FLASH	(/* OR_CSNT_SAM | */ OR_ACS_DIV4 | OR_BI | \
 				 OR_SCY_5_CLK | OR_EHTR)
 
-#define CFG_OR0_REMAP	(CFG_REMAP_OR_AM  | CFG_OR_TIMING_FLASH)
-#define CFG_OR0_PRELIM	(CFG_PRELIM_OR_AM | CFG_OR_TIMING_FLASH)
+#define CONFIG_SYS_OR0_REMAP	(CONFIG_SYS_REMAP_OR_AM  | CONFIG_SYS_OR_TIMING_FLASH)
+#define CONFIG_SYS_OR0_PRELIM	(CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_FLASH)
 /* 16 bit, bank valid */
-#define CFG_BR0_PRELIM	((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_PS_16 | BR_V )
+#define CONFIG_SYS_BR0_PRELIM	((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_PS_16 | BR_V )
 
-#define CFG_OR1_REMAP	CFG_OR0_REMAP
-#define CFG_OR1_PRELIM	CFG_OR0_PRELIM
+#define CONFIG_SYS_OR1_REMAP	CONFIG_SYS_OR0_REMAP
+#define CONFIG_SYS_OR1_PRELIM	CONFIG_SYS_OR0_PRELIM
 /* 16 bit, bank valid */
-#define CFG_BR1_PRELIM	((FLASH_BASE1_PRELIM & BR_BA_MSK) | BR_PS_16 | BR_V )
+#define CONFIG_SYS_BR1_PRELIM	((FLASH_BASE1_PRELIM & BR_BA_MSK) | BR_PS_16 | BR_V )
 
 /*
  * BR2-5 and OR2-5 (SRAM/SDRAM/PER8/SHARC)
@@ -373,44 +373,44 @@
 
 /* SRAM timing: Multiplexed addresses, GPL5 output to GPL5_A (don't care)	*/
 
-#define CFG_OR_TIMING_SRAM	0x00000D42	/* SRAM-Timing */
-#define CFG_OR2 (SRAM_OR_AM | CFG_OR_TIMING_SRAM )
-#define CFG_BR2 ((SRAM_BASE & BR_BA_MSK) | BR_PS_16 | BR_V )
+#define CONFIG_SYS_OR_TIMING_SRAM	0x00000D42	/* SRAM-Timing */
+#define CONFIG_SYS_OR2 (SRAM_OR_AM | CONFIG_SYS_OR_TIMING_SRAM )
+#define CONFIG_SYS_BR2 ((SRAM_BASE & BR_BA_MSK) | BR_PS_16 | BR_V )
 
 /* SDRAM timing: Multiplexed addresses, GPL5 output to GPL5_A (don't care)	*/
 
-#define CFG_OR_TIMING_SDRAM	0x00000A00	/* SDRAM-Timing */
-#define CFG_OR3_PRELIM	(SDRAM_PRELIM_OR_AM | CFG_OR_TIMING_SDRAM )
-#define CFG_BR3_PRELIM	((SDRAM_BASE3_PRELIM & BR_BA_MSK) | BR_MS_UPMB | BR_V )
+#define CONFIG_SYS_OR_TIMING_SDRAM	0x00000A00	/* SDRAM-Timing */
+#define CONFIG_SYS_OR3_PRELIM	(SDRAM_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_SDRAM )
+#define CONFIG_SYS_BR3_PRELIM	((SDRAM_BASE3_PRELIM & BR_BA_MSK) | BR_MS_UPMB | BR_V )
 
-#define CFG_OR_TIMING_PER8	0x00000F32	/* PER8-Timing */
-#define CFG_OR4 (PER8_OR_AM | CFG_OR_TIMING_PER8 )
-#define CFG_BR4 ((PER8_BASE & BR_BA_MSK) | BR_PS_8 | BR_V )
+#define CONFIG_SYS_OR_TIMING_PER8	0x00000F32	/* PER8-Timing */
+#define CONFIG_SYS_OR4 (PER8_OR_AM | CONFIG_SYS_OR_TIMING_PER8 )
+#define CONFIG_SYS_BR4 ((PER8_BASE & BR_BA_MSK) | BR_PS_8 | BR_V )
 
-#define CFG_OR_TIMING_SHARC	0x00000700	/* SHARC-Timing */
-#define CFG_OR5 (SHARC_OR_AM | CFG_OR_TIMING_SHARC )
-#define CFG_BR5 ((SHARC_BASE & BR_BA_MSK) | BR_PS_32 | BR_MS_UPMA | BR_V )
+#define CONFIG_SYS_OR_TIMING_SHARC	0x00000700	/* SHARC-Timing */
+#define CONFIG_SYS_OR5 (SHARC_OR_AM | CONFIG_SYS_OR_TIMING_SHARC )
+#define CONFIG_SYS_BR5 ((SHARC_BASE & BR_BA_MSK) | BR_PS_32 | BR_MS_UPMA | BR_V )
 /*
  * Memory Periodic Timer Prescaler
  */
 
 /* periodic timer for refresh */
-#define CFG_MBMR_PTB	204
+#define CONFIG_SYS_MBMR_PTB	204
 
 /* refresh rate 15.6 us (= 64 ms / 4K = 62.4 / quad bursts) for <= 128 MBit	*/
-#define CFG_MPTPR_2BK_4K	MPTPR_PTP_DIV16		/* setting for 2 banks	*/
-#define CFG_MPTPR_1BK_4K	MPTPR_PTP_DIV32		/* setting for 1 bank	*/
+#define CONFIG_SYS_MPTPR_2BK_4K	MPTPR_PTP_DIV16		/* setting for 2 banks	*/
+#define CONFIG_SYS_MPTPR_1BK_4K	MPTPR_PTP_DIV32		/* setting for 1 bank	*/
 
 /* refresh rate 7.8 us (= 64 ms / 8K = 31.2 / quad bursts) for 256 MBit		*/
-#define CFG_MPTPR_2BK_8K	MPTPR_PTP_DIV8		/* setting for 2 banks	*/
-#define CFG_MPTPR_1BK_8K	MPTPR_PTP_DIV16		/* setting for 1 bank	*/
+#define CONFIG_SYS_MPTPR_2BK_8K	MPTPR_PTP_DIV8		/* setting for 2 banks	*/
+#define CONFIG_SYS_MPTPR_1BK_8K	MPTPR_PTP_DIV16		/* setting for 1 bank	*/
 
 /*
  * MBMR settings for SDRAM
  */
 
 /* 8 column SDRAM */
-#define CFG_MBMR_8COL	((CFG_MBMR_PTB << MBMR_PTB_SHIFT)  | \
+#define CONFIG_SYS_MBMR_8COL	((CONFIG_SYS_MBMR_PTB << MBMR_PTB_SHIFT)  | \
 			 MBMR_AMB_TYPE_0 | MBMR_DSB_1_CYCL | MBMR_G0CLB_A11 |	\
 			 MBMR_RLFB_1X	 | MBMR_WLFB_1X	   | MBMR_TLFB_4X)
 
diff --git a/include/configs/SX1.h b/include/configs/SX1.h
index d23367979..fd1a3bdd5 100644
--- a/include/configs/SX1.h
+++ b/include/configs/SX1.h
@@ -46,8 +46,8 @@
 /*
  * Size of malloc() pool
  */
-#define CFG_MALLOC_LEN		(CFG_ENV_SIZE + 128*1024)
-#define CFG_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
+#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + 128*1024)
+#define CONFIG_SYS_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
 
 /*
  * Hardware drivers
@@ -56,11 +56,11 @@
 /*
  * NS16550 Configuration
  */
-#define CFG_NS16550
-#define CFG_NS16550_SERIAL
-#define CFG_NS16550_REG_SIZE	(-4)
-#define CFG_NS16550_CLK		(CONFIG_SYS_CLK_FREQ)	/* can be 12M/32Khz or 48Mhz  */
-#define CFG_NS16550_COM1	0xfffb0000		/* uart1, bluetooth uart on helen */
+#define CONFIG_SYS_NS16550
+#define CONFIG_SYS_NS16550_SERIAL
+#define CONFIG_SYS_NS16550_REG_SIZE	(-4)
+#define CONFIG_SYS_NS16550_CLK		(CONFIG_SYS_CLK_FREQ)	/* can be 12M/32Khz or 48Mhz  */
+#define CONFIG_SYS_NS16550_COM1	0xfffb0000		/* uart1, bluetooth uart on helen */
 
 /*
  * select serial console configuration
@@ -82,8 +82,8 @@
  * I2C configuration
  */
 #define CONFIG_HARD_I2C
-#define CFG_I2C_SPEED		100000
-#define CFG_I2C_SLAVE		1
+#define CONFIG_SYS_I2C_SPEED		100000
+#define CONFIG_SYS_I2C_SLAVE		1
 #define CONFIG_DRIVER_OMAP1510_I2C
 
 #define CONFIG_ENV_OVERWRITE
@@ -91,7 +91,7 @@
 #define CONFIG_ENV_OVERWRITE
 #define CONFIG_CONS_INDEX	1
 #define CONFIG_BAUDRATE		115200
-#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
 
 
 /*
@@ -121,26 +121,26 @@
 /*
  * Miscellaneous configurable options
  */
-#define CFG_LONGHELP				/* undef to save memory		*/
-#define CFG_PROMPT		"SX1# " /* Monitor Command Prompt	*/
-#define CFG_CBSIZE		256		/* Console I/O Buffer Size	*/
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define CFG_MAXARGS		16		/* max number of command args	*/
-#define CFG_BARGSIZE		CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+#define CONFIG_SYS_LONGHELP				/* undef to save memory		*/
+#define CONFIG_SYS_PROMPT		"SX1# " /* Monitor Command Prompt	*/
+#define CONFIG_SYS_CBSIZE		256		/* Console I/O Buffer Size	*/
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS		16		/* max number of command args	*/
+#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
 
-#define CFG_MEMTEST_START	0x10000000	/* memtest works on	*/
-#define CFG_MEMTEST_END		0x12000000	/* 32 MB in DRAM	*/
+#define CONFIG_SYS_MEMTEST_START	0x10000000	/* memtest works on	*/
+#define CONFIG_SYS_MEMTEST_END		0x12000000	/* 32 MB in DRAM	*/
 
-#undef	CFG_CLKS_IN_HZ		/* everything, incl board info, in Hz */
+#undef	CONFIG_SYS_CLKS_IN_HZ		/* everything, incl board info, in Hz */
 
-#define CFG_LOAD_ADDR		0x10000000	/* default load address */
+#define CONFIG_SYS_LOAD_ADDR		0x10000000	/* default load address */
 
 /* The 1510 has 3 timers, they can be driven by the RefClk (12Mhz) or by DPLL1.
  * This time is further subdivided by a local divisor.
  */
-#define CFG_TIMERBASE	0xFFFEC500	    /* use timer 1 */
-#define CFG_PVT		7		    /* 2^(pvt+1), divide by 256 */
-#define CFG_HZ			((CONFIG_SYS_CLK_FREQ)/(2 << CFG_PVT))
+#define CONFIG_SYS_TIMERBASE	0xFFFEC500	    /* use timer 1 */
+#define CONFIG_SYS_PVT		7		    /* 2^(pvt+1), divide by 256 */
+#define CONFIG_SYS_HZ			((CONFIG_SYS_CLK_FREQ)/(2 << CONFIG_SYS_PVT))
 
 /*-----------------------------------------------------------------------
  * Stack sizes
@@ -163,39 +163,39 @@
 #define PHYS_FLASH_1		0x00000000 /* Flash Bank #1 */
 #define PHYS_FLASH_2		0x04000000 /* Flash Bank #2 */
 
-#define CFG_FLASH_BASE		PHYS_FLASH_1
+#define CONFIG_SYS_FLASH_BASE		PHYS_FLASH_1
 
 /*-----------------------------------------------------------------------
  * FLASH and environment organization
  */
-#define CFG_MAX_FLASH_BANKS	2	/* max number of memory banks */
+#define CONFIG_SYS_MAX_FLASH_BANKS	2	/* max number of memory banks */
 #define PHYS_FLASH_SIZE		(16 << 10) /* 16 MB */
 #define PHYS_FLASH_SECT_SIZE	(128*1024) /* Size of a sector (128kB) */
-#define CFG_MAX_FLASH_SECT	(128)	/* max number of sectors on one chip */
-#define CFG_ENV_ADDR	(CFG_FLASH_BASE + PHYS_FLASH_SECT_SIZE) /* addr of environment */
-#define CFG_MONITOR_BASE	CFG_FLASH_BASE	/* Monitor at beginning of flash */
-#define CFG_MONITOR_LEN		PHYS_FLASH_SECT_SIZE	/* Reserve 1 sector */
-#define CFG_FLASH_BANKS_LIST	{ CFG_FLASH_BASE, CFG_FLASH_BASE + PHYS_FLASH_SIZE }
+#define CONFIG_SYS_MAX_FLASH_SECT	(128)	/* max number of sectors on one chip */
+#define CONFIG_ENV_ADDR	(CONFIG_SYS_FLASH_BASE + PHYS_FLASH_SECT_SIZE) /* addr of environment */
+#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_FLASH_BASE	/* Monitor at beginning of flash */
+#define CONFIG_SYS_MONITOR_LEN		PHYS_FLASH_SECT_SIZE	/* Reserve 1 sector */
+#define CONFIG_SYS_FLASH_BANKS_LIST	{ CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE + PHYS_FLASH_SIZE }
 
 /*-----------------------------------------------------------------------
  * FLASH driver setup
  */
-#define CFG_FLASH_CFI		1	/* Flash memory is CFI compliant */
+#define CONFIG_SYS_FLASH_CFI		1	/* Flash memory is CFI compliant */
 #define CONFIG_FLASH_CFI_DRIVER	1	/* Use drivers/mtd/cfi_flash.c */
-#define CFG_FLASH_USE_BUFFER_WRITE 1	/* Use buffered writes (~10x faster) */
-#define CFG_FLASH_PROTECTION	1	/* Use hardware sector protection */
+#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1	/* Use buffered writes (~10x faster) */
+#define CONFIG_SYS_FLASH_PROTECTION	1	/* Use hardware sector protection */
 
 /* timeout values are in ticks */
-#define CFG_FLASH_ERASE_TOUT	(20*CFG_HZ) /* Timeout for Flash Erase */
-#define CFG_FLASH_WRITE_TOUT	(20*CFG_HZ) /* Timeout for Flash Write */
+#define CONFIG_SYS_FLASH_ERASE_TOUT	(20*CONFIG_SYS_HZ) /* Timeout for Flash Erase */
+#define CONFIG_SYS_FLASH_WRITE_TOUT	(20*CONFIG_SYS_HZ) /* Timeout for Flash Write */
 
-#define CFG_ENV_IS_IN_FLASH	1
-#define CFG_ENV_SECT_SIZE	PHYS_FLASH_SECT_SIZE
-#define CFG_ENV_SIZE		CFG_ENV_SECT_SIZE /* Total Size of Environment Sector */
-#define CFG_ENV_OFFSET	( CFG_MONITOR_BASE + CFG_MONITOR_LEN ) /* Environment after Monitor */
+#define CONFIG_ENV_IS_IN_FLASH	1
+#define CONFIG_ENV_SECT_SIZE	PHYS_FLASH_SECT_SIZE
+#define CONFIG_ENV_SIZE		CONFIG_ENV_SECT_SIZE /* Total Size of Environment Sector */
+#define CONFIG_ENV_OFFSET	( CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN ) /* Environment after Monitor */
 
 /* Address and size of Redundant Environment Sector	*/
-#define CFG_ENV_SIZE_REDUND	0x20000
-#define CFG_ENV_OFFSET_REDUND	0x40000
+#define CONFIG_ENV_SIZE_REDUND	0x20000
+#define CONFIG_ENV_OFFSET_REDUND	0x40000
 
 #endif	/* __CONFIG_H */
diff --git a/include/configs/SXNI855T.h b/include/configs/SXNI855T.h
index c5d538686..7fc455b8c 100644
--- a/include/configs/SXNI855T.h
+++ b/include/configs/SXNI855T.h
@@ -94,7 +94,7 @@
 # define STATUS_LED_DAT		im_ioport.iop_padat
 
 # define STATUS_LED_BIT		0x8000		/* LED 0 is on PA.0 */
-# define STATUS_LED_PERIOD	((CFG_HZ / 2) / 5)	/* blink at 5 Hz */
+# define STATUS_LED_PERIOD	((CONFIG_SYS_HZ / 2) / 5)	/* blink at 5 Hz */
 # define STATUS_LED_STATE	STATUS_LED_BLINKING
 
 # define STATUS_LED_ACTIVE	0		/* LED on for bit == 0	*/
@@ -136,15 +136,15 @@
 			else    immr->im_cpm.cp_pbdat &= ~PB_SCL
 #define I2C_DELAY	udelay(5)	/* 1/4 I2C clock duration */
 
-# define CFG_I2C_SPEED		50000
-# define CFG_I2C_SLAVE		0xFE
-# define CFG_I2C_EEPROM_ADDR	0x50	/* Atmel 24C64			*/
-# define CFG_I2C_EEPROM_ADDR_LEN 2	/* two byte address		*/
+# define CONFIG_SYS_I2C_SPEED		50000
+# define CONFIG_SYS_I2C_SLAVE		0xFE
+# define CONFIG_SYS_I2C_EEPROM_ADDR	0x50	/* Atmel 24C64			*/
+# define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2	/* two byte address		*/
 
 #define	CONFIG_FEC_ENET		1	/* use FEC ethernet  */
 #define	CONFIG_MII		1
 
-#define CFG_DISCOVER_PHY
+#define CONFIG_SYS_DISCOVER_PHY
 
 
 /*
@@ -167,7 +167,7 @@
 #define CONFIG_CMD_DATE
 
 
-#define CFG_JFFS2_SORT_FRAGMENTS
+#define CONFIG_SYS_JFFS2_SORT_FRAGMENTS
 
 /*
  * JFFS2 partitions
@@ -197,7 +197,7 @@
 /* NAND flash support */
 #define CONFIG_NAND_LEGACY
 #define CONFIG_MTD_NAND_ECC_JFFS2
-#define CFG_MAX_NAND_DEVICE	1	/* Max number of NAND devices	*/
+#define CONFIG_SYS_MAX_NAND_DEVICE	1	/* Max number of NAND devices	*/
 #define SECTORSIZE 512
 
 #define ADDR_COLUMN 1
@@ -210,7 +210,7 @@
 
 /* DFBUSY is available on Port C, bit 12; 0 if busy */
 #define NAND_WAIT_READY(nand)	\
-	while (!(((volatile immap_t *)CFG_IMMR)->im_ioport.iop_pcdat & 0x0008));
+	while (!(((volatile immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pcdat & 0x0008));
 #define WRITE_NAND_COMMAND(d, adr) WRITE_NAND((d), (adr))
 #define WRITE_NAND_ADDRESS(d, adr) WRITE_NAND((d), (adr))
 #define WRITE_NAND(d, adr)	\
@@ -236,25 +236,25 @@
 /*
  * Miscellaneous configurable options
  */
-#define	CFG_LONGHELP			/* undef to save a little memory */
-#define	CFG_PROMPT		"=>"	/* Monitor Command Prompt	*/
+#define	CONFIG_SYS_LONGHELP			/* undef to save a little memory */
+#define	CONFIG_SYS_PROMPT		"=>"	/* Monitor Command Prompt	*/
 #if defined(CONFIG_CMD_KGDB)
-#define	CFG_CBSIZE	1024		/* Console I/O Buffer Size	*/
+#define	CONFIG_SYS_CBSIZE	1024		/* Console I/O Buffer Size	*/
 #else
-#define	CFG_CBSIZE	256		/* Console I/O Buffer Size	*/
+#define	CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size	*/
 #endif
-#define	CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define	CFG_MAXARGS	16		/* max number of command args	*/
-#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+#define	CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define	CONFIG_SYS_MAXARGS	16		/* max number of command args	*/
+#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
 
-#define CFG_MEMTEST_START	0x0100000	/* memtest works on	*/
-#define CFG_MEMTEST_END		0x0400000	/* 1 ... 4 MB in DRAM	*/
+#define CONFIG_SYS_MEMTEST_START	0x0100000	/* memtest works on	*/
+#define CONFIG_SYS_MEMTEST_END		0x0400000	/* 1 ... 4 MB in DRAM	*/
 
-#define CFG_LOAD_ADDR		0x00100000
+#define CONFIG_SYS_LOAD_ADDR		0x00100000
 
-#define	CFG_HZ		1000		/* decrementer freq: 1 ms ticks	*/
+#define	CONFIG_SYS_HZ		1000		/* decrementer freq: 1 ms ticks	*/
 
-#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
 
 /*
  * Low Level Configuration Settings
@@ -264,65 +264,65 @@
 /*-----------------------------------------------------------------------
  * Internal Memory Mapped Register
  */
-#define CFG_IMMR		0xFF000000
-#define CFG_IMMR_SIZE		((uint)(64 * 1024))
+#define CONFIG_SYS_IMMR		0xFF000000
+#define CONFIG_SYS_IMMR_SIZE		((uint)(64 * 1024))
 
 /*-----------------------------------------------------------------------
  * Definitions for initial stack pointer and data area (in DPRAM)
  */
-#define CFG_INIT_RAM_ADDR	CFG_IMMR
-#define	CFG_INIT_RAM_END	0x2F00	/* End of used area in DPRAM	*/
-#define	CFG_GBL_DATA_SIZE	64  /* size in bytes reserved for initial data */
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define	CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_IMMR
+#define	CONFIG_SYS_INIT_RAM_END	0x2F00	/* End of used area in DPRAM	*/
+#define	CONFIG_SYS_GBL_DATA_SIZE	64  /* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define	CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
 /*-----------------------------------------------------------------------
  * Start addresses for the final memory configuration
  * (Set up by the startup code)
- * Please note that CFG_SDRAM_BASE _must_ start at 0
+ * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
  */
-#define	CFG_SDRAM_BASE		0x00000000
-#define	CFG_SRAM_BASE		0xF4000000
-#define	CFG_SRAM_SIZE		0x04000000	/* autosize up to 64Mbyte */
+#define	CONFIG_SYS_SDRAM_BASE		0x00000000
+#define	CONFIG_SYS_SRAM_BASE		0xF4000000
+#define	CONFIG_SYS_SRAM_SIZE		0x04000000	/* autosize up to 64Mbyte */
 
-#define CFG_FLASH_BASE		0xF8000000
-#define CFG_FLASH_SIZE		((uint)(8 * 1024 * 1024))	/* max 8Mbyte */
+#define CONFIG_SYS_FLASH_BASE		0xF8000000
+#define CONFIG_SYS_FLASH_SIZE		((uint)(8 * 1024 * 1024))	/* max 8Mbyte */
 
-#define CFG_DFLASH_BASE		0xff020000 /* DiskOnChip or NAND FLASH */
-#define CFG_DFLASH_SIZE		0x00010000
+#define CONFIG_SYS_DFLASH_BASE		0xff020000 /* DiskOnChip or NAND FLASH */
+#define CONFIG_SYS_DFLASH_SIZE		0x00010000
 
-#define CFG_FPGA_BASE		0xFF100000	/* Xilinx FPGA */
-#define CFG_FPGA_PROG		0xFF130000	/* Programming address */
-#define CFG_FPGA_SIZE		0x00040000	/* 256KiB usable */
+#define CONFIG_SYS_FPGA_BASE		0xFF100000	/* Xilinx FPGA */
+#define CONFIG_SYS_FPGA_PROG		0xFF130000	/* Programming address */
+#define CONFIG_SYS_FPGA_SIZE		0x00040000	/* 256KiB usable */
 
-#define	CFG_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor	*/
-#define CFG_MONITOR_BASE	CFG_FLASH_BASE
-#define	CFG_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/
+#define	CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor	*/
+#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_FLASH_BASE
+#define	CONFIG_SYS_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/
 
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define	CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux	*/
+#define	CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux	*/
 /*-----------------------------------------------------------------------
  * FLASH organization
  */
-#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
+#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
 /* Intel 28F640 has 135, 127 64K sectors in 8MB, + 8 more for 8K boot blocks.
  * AMD 29LV641 has 128 64K sectors in 8MB
  */
-#define CFG_MAX_FLASH_SECT	135	/* max number of sectors on one chip	*/
+#define CONFIG_SYS_MAX_FLASH_SECT	135	/* max number of sectors on one chip	*/
 
-#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
-#define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
+#define CONFIG_SYS_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
+#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
 
 /*-----------------------------------------------------------------------
  * Cache Configuration
  */
-#define CFG_CACHELINE_SIZE	16	/* For all MPC8xx CPUs			*/
+#define CONFIG_SYS_CACHELINE_SIZE	16	/* For all MPC8xx CPUs			*/
 #if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT	4	/* log base 2 of the above value	*/
+#define CONFIG_SYS_CACHELINE_SHIFT	4	/* log base 2 of the above value	*/
 #endif
 
 /*-----------------------------------------------------------------------
@@ -332,10 +332,10 @@
  * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze
  */
 #if defined(CONFIG_WATCHDOG)
-#define CFG_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
+#define CONFIG_SYS_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
 			 SYPCR_SWE  | SYPCR_SWRI| SYPCR_SWP)
 #else
-#define CFG_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
+#define CONFIG_SYS_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
 #endif
 
 /*-----------------------------------------------------------------------
@@ -343,28 +343,28 @@
  *-----------------------------------------------------------------------
  * PCMCIA config., multi-function pin tri-state
  */
-#define CFG_SIUMCR	(SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_MLRC01)
+#define CONFIG_SYS_SIUMCR	(SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_MLRC01)
 
 /*-----------------------------------------------------------------------
  * TBSCR - Time Base Status and Control					11-26
  *-----------------------------------------------------------------------
  * Clear Reference Interrupt Status, Timebase freezing enabled
  */
-#define CFG_TBSCR	(TBSCR_REFA | TBSCR_REFB | TBSCR_TBE)
+#define CONFIG_SYS_TBSCR	(TBSCR_REFA | TBSCR_REFB | TBSCR_TBE)
 
 /*-----------------------------------------------------------------------
  * PISCR - Periodic Interrupt Status and Control		11-31
  *-----------------------------------------------------------------------
  * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
  */
-#define CFG_PISCR	(PISCR_PS | PISCR_PITF)
+#define CONFIG_SYS_PISCR	(PISCR_PS | PISCR_PITF)
 
 /*-----------------------------------------------------------------------
  * PLPRCR - PLL, Low-Power, and Reset Control Register	15-30
  *-----------------------------------------------------------------------
  * set the PLL, the low-power modes and the reset control (15-29)
  */
-#define CFG_PLPRCR	(((MPC8XX_FACT-1) << PLPRCR_MF_SHIFT) |	\
+#define CONFIG_SYS_PLPRCR	(((MPC8XX_FACT-1) << PLPRCR_MF_SHIFT) |	\
 				PLPRCR_SPLSS | PLPRCR_TEXPS | PLPRCR_TMIST)
 
 /*-----------------------------------------------------------------------
@@ -374,14 +374,14 @@
  * power management and some other internal clocks
  */
 #define SCCR_MASK	SCCR_EBDF11
-#define CFG_SCCR	(SCCR_TBS|SCCR_COM00|SCCR_DFSYNC00|SCCR_DFBRG00|SCCR_DFNL000|SCCR_DFNH000|SCCR_DFLCD000|SCCR_DFALCD00)
+#define CONFIG_SYS_SCCR	(SCCR_TBS|SCCR_COM00|SCCR_DFSYNC00|SCCR_DFBRG00|SCCR_DFNL000|SCCR_DFNH000|SCCR_DFLCD000|SCCR_DFALCD00)
 
  /*-----------------------------------------------------------------------
  *
  *-----------------------------------------------------------------------
  *
  */
-#define CFG_DER		0
+#define CONFIG_SYS_DER		0
 
 /* Because of the way the 860 starts up and assigns CS0 the
  * entire address space, we have to set the memory controller
@@ -398,47 +398,47 @@
  * BR0 and OR0 (FLASH)
  */
 
-#define CFG_PRELIM_OR0_AM	0xFC000000	/* OR addr mask */
+#define CONFIG_SYS_PRELIM_OR0_AM	0xFC000000	/* OR addr mask */
 
 /* FLASH timing: ACS = 10, TRLX = 1, CSNT = 1, SCY = 3, EHTR = 0	*/
-#define CFG_OR_TIMING_FLASH	(OR_CSNT_SAM  | OR_ACS_DIV4 | OR_BI | OR_SCY_3_CLK | OR_TRLX)
+#define CONFIG_SYS_OR_TIMING_FLASH	(OR_CSNT_SAM  | OR_ACS_DIV4 | OR_BI | OR_SCY_3_CLK | OR_TRLX)
 
-#define CFG_OR0_PRELIM	(CFG_PRELIM_OR0_AM | CFG_OR_TIMING_FLASH)
+#define CONFIG_SYS_OR0_PRELIM	(CONFIG_SYS_PRELIM_OR0_AM | CONFIG_SYS_OR_TIMING_FLASH)
 
 #define CONFIG_FLASH_16BIT
-#define CFG_BR0_PRELIM	((CFG_FLASH_BASE & BR_BA_MSK) | BR_PS_16 | BR_V )
-#define CFG_FLASH_PROTECTION	/* need to lock/unlock sectors in hardware */
+#define CONFIG_SYS_BR0_PRELIM	((CONFIG_SYS_FLASH_BASE & BR_BA_MSK) | BR_PS_16 | BR_V )
+#define CONFIG_SYS_FLASH_PROTECTION	/* need to lock/unlock sectors in hardware */
 
 /**********************************************************
  * BR1 and OR1 (FPGA)
  * These preliminary values are also the final values.
  */
-#define CFG_OR_TIMING_FPGA \
+#define CONFIG_SYS_OR_TIMING_FPGA \
 	(OR_CSNT_SAM | OR_ACS_DIV2 | OR_BI | OR_SCY_4_CLK | OR_EHTR | OR_TRLX)
-#define CFG_BR1_PRELIM	((CFG_FPGA_BASE & BR_BA_MSK) | BR_PS_8 | BR_V )
-#define CFG_OR1_PRELIM	(((-CFG_FPGA_SIZE) & OR_AM_MSK) | CFG_OR_TIMING_FPGA)
+#define CONFIG_SYS_BR1_PRELIM	((CONFIG_SYS_FPGA_BASE & BR_BA_MSK) | BR_PS_8 | BR_V )
+#define CONFIG_SYS_OR1_PRELIM	(((-CONFIG_SYS_FPGA_SIZE) & OR_AM_MSK) | CONFIG_SYS_OR_TIMING_FPGA)
 
 /**********************************************************
  * BR4 and OR4 (data flash)
  * These preliminary values are also the final values.
  */
-#define CFG_OR_TIMING_DFLASH \
+#define CONFIG_SYS_OR_TIMING_DFLASH \
 	(OR_CSNT_SAM | OR_ACS_DIV4 | OR_BI | OR_SCY_2_CLK | OR_EHTR | OR_TRLX)
-#define CFG_BR4_PRELIM	((CFG_DFLASH_BASE & BR_BA_MSK) | BR_PS_8 | BR_V )
-#define CFG_OR4_PRELIM	(((-CFG_DFLASH_SIZE) & OR_AM_MSK) | CFG_OR_TIMING_DFLASH)
+#define CONFIG_SYS_BR4_PRELIM	((CONFIG_SYS_DFLASH_BASE & BR_BA_MSK) | BR_PS_8 | BR_V )
+#define CONFIG_SYS_OR4_PRELIM	(((-CONFIG_SYS_DFLASH_SIZE) & OR_AM_MSK) | CONFIG_SYS_OR_TIMING_DFLASH)
 
 /**********************************************************
  * BR5/6 and OR5/6 (Dual UART)
  */
-#define CFG_DUART_SIZE	0x8000	/* 32K window, only uses 8 bytes */
-#define CFG_DUARTA_BASE	0xff010000
-#define CFG_DUARTB_BASE	0xff018000
+#define CONFIG_SYS_DUART_SIZE	0x8000	/* 32K window, only uses 8 bytes */
+#define CONFIG_SYS_DUARTA_BASE	0xff010000
+#define CONFIG_SYS_DUARTB_BASE	0xff018000
 
 #define DUART_MBMR	0
-#define DUART_OR_VALUE (ORMASK(CFG_DUART_SIZE) | OR_G5LS| OR_BI)
+#define DUART_OR_VALUE (ORMASK(CONFIG_SYS_DUART_SIZE) | OR_G5LS| OR_BI)
 #define DUART_BR_VALUE (BR_MS_UPMB | BR_PS_8 | BR_V)
-#define DUART_BR5_VALUE ((CFG_DUARTA_BASE & BR_BA_MSK ) | DUART_BR_VALUE)
-#define DUART_BR6_VALUE ((CFG_DUARTB_BASE & BR_BA_MSK ) | DUART_BR_VALUE)
+#define DUART_BR5_VALUE ((CONFIG_SYS_DUARTA_BASE & BR_BA_MSK ) | DUART_BR_VALUE)
+#define DUART_BR6_VALUE ((CONFIG_SYS_DUARTB_BASE & BR_BA_MSK ) | DUART_BR_VALUE)
 
 /**********************************************************
  *
@@ -449,18 +449,18 @@
 
 #define CONFIG_RESET_ON_PANIC		/* reset if system panic() */
 
-#define CFG_ENV_IS_IN_FLASH
-#ifdef CFG_ENV_IS_IN_FLASH
+#define CONFIG_ENV_IS_IN_FLASH
+#ifdef CONFIG_ENV_IS_IN_FLASH
   /* environment is in FLASH */
-  #define CFG_ENV_ADDR		0xF8040000	/* AM29LV641 or AM29LV800BT */
-  #define CFG_ENV_ADDR_REDUND	0xF8050000	/* AM29LV641 or AM29LV800BT */
-  #define CFG_ENV_SECT_SIZE	0x00010000
-  #define CFG_ENV_SIZE		0x00002000
+  #define CONFIG_ENV_ADDR		0xF8040000	/* AM29LV641 or AM29LV800BT */
+  #define CONFIG_ENV_ADDR_REDUND	0xF8050000	/* AM29LV641 or AM29LV800BT */
+  #define CONFIG_ENV_SECT_SIZE	0x00010000
+  #define CONFIG_ENV_SIZE		0x00002000
 #else
   /* environment is in EEPROM */
-  #define CFG_ENV_IS_IN_EEPROM		1
-  #define CFG_ENV_OFFSET		0	/* at beginning of EEPROM */
-  #define CFG_ENV_SIZE		     1024	/* Use only a part of it*/
+  #define CONFIG_ENV_IS_IN_EEPROM		1
+  #define CONFIG_ENV_OFFSET		0	/* at beginning of EEPROM */
+  #define CONFIG_ENV_SIZE		     1024	/* Use only a part of it*/
 #endif
 
 #if 1
diff --git a/include/configs/Sandpoint8240.h b/include/configs/Sandpoint8240.h
index cfd16d312..125b9a257 100644
--- a/include/configs/Sandpoint8240.h
+++ b/include/configs/Sandpoint8240.h
@@ -110,14 +110,14 @@
 /*
  * Miscellaneous configurable options
  */
-#define CFG_LONGHELP		1		/* undef to save memory		*/
-#define CFG_PROMPT		"=> "		/* Monitor Command Prompt	*/
-#define CFG_CBSIZE		256		/* Console I/O Buffer Size	*/
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16)	/* Print Buffer Size	*/
-#define CFG_MAXARGS		16		/* max number of command args	*/
-#define CFG_BARGSIZE		CFG_CBSIZE	/* Boot Argument Buffer Size	*/
-#define CFG_LOAD_ADDR		0x00100000	/* default load address		*/
-#define CFG_HZ			1000		/* decrementer freq: 1 ms ticks */
+#define CONFIG_SYS_LONGHELP		1		/* undef to save memory		*/
+#define CONFIG_SYS_PROMPT		"=> "		/* Monitor Command Prompt	*/
+#define CONFIG_SYS_CBSIZE		256		/* Console I/O Buffer Size	*/
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)	/* Print Buffer Size	*/
+#define CONFIG_SYS_MAXARGS		16		/* max number of command args	*/
+#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
+#define CONFIG_SYS_LOAD_ADDR		0x00100000	/* default load address		*/
+#define CONFIG_SYS_HZ			1000		/* decrementer freq: 1 ms ticks */
 
 /*-----------------------------------------------------------------------
  * PCI stuff
@@ -129,7 +129,7 @@
 #define CONFIG_NET_MULTI			/* Multi ethernet cards support */
 
 #define CONFIG_EEPRO100
-#define CFG_RX_ETH_BUFFER	8               /* use 8 rx buffer on eepro100  */
+#define CONFIG_SYS_RX_ETH_BUFFER	8               /* use 8 rx buffer on eepro100  */
 
 #define PCI_ENET0_IOADDR	0x80000000
 #define PCI_ENET0_MEMADDR	0x80000000
@@ -140,58 +140,58 @@
 /*-----------------------------------------------------------------------
  * Start addresses for the final memory configuration
  * (Set up by the startup code)
- * Please note that CFG_SDRAM_BASE _must_ start at 0
+ * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
  */
-#define CFG_SDRAM_BASE		0x00000000
-#define CFG_MAX_RAM_SIZE	0x10000000
+#define CONFIG_SYS_SDRAM_BASE		0x00000000
+#define CONFIG_SYS_MAX_RAM_SIZE	0x10000000
 
-#define CFG_RESET_ADDRESS	0xFFF00100
+#define CONFIG_SYS_RESET_ADDRESS	0xFFF00100
 
 #if defined (USE_DINK32)
-#define CFG_MONITOR_LEN		0x00030000
-#define CFG_MONITOR_BASE	0x00090000
-#define CFG_RAMBOOT		1
-#define CFG_INIT_RAM_ADDR	(CFG_MONITOR_BASE + CFG_MONITOR_LEN)
-#define CFG_INIT_RAM_END	0x10000
-#define CFG_GBL_DATA_SIZE	256  /* size in bytes reserved for initial data */
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_MONITOR_LEN		0x00030000
+#define CONFIG_SYS_MONITOR_BASE	0x00090000
+#define CONFIG_SYS_RAMBOOT		1
+#define CONFIG_SYS_INIT_RAM_ADDR	(CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)
+#define CONFIG_SYS_INIT_RAM_END	0x10000
+#define CONFIG_SYS_GBL_DATA_SIZE	256  /* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 #else
-#undef	CFG_RAMBOOT
-#define CFG_MONITOR_LEN		0x00030000
-#define CFG_MONITOR_BASE	TEXT_BASE
+#undef	CONFIG_SYS_RAMBOOT
+#define CONFIG_SYS_MONITOR_LEN		0x00030000
+#define CONFIG_SYS_MONITOR_BASE	TEXT_BASE
 
-/*#define CFG_GBL_DATA_SIZE    256*/
-#define CFG_GBL_DATA_SIZE	128
+/*#define CONFIG_SYS_GBL_DATA_SIZE    256*/
+#define CONFIG_SYS_GBL_DATA_SIZE	128
 
-#define CFG_INIT_RAM_ADDR     0x40000000
-#define CFG_INIT_RAM_END      0x1000
-#define CFG_GBL_DATA_OFFSET  (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_RAM_ADDR     0x40000000
+#define CONFIG_SYS_INIT_RAM_END      0x1000
+#define CONFIG_SYS_GBL_DATA_OFFSET  (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
 
 #endif
 
-#define CFG_FLASH_BASE		0xFFF00000
+#define CONFIG_SYS_FLASH_BASE		0xFFF00000
 #if 0
-#define CFG_FLASH_SIZE		(512 * 1024)	/* sandpoint has tiny eeprom	*/
+#define CONFIG_SYS_FLASH_SIZE		(512 * 1024)	/* sandpoint has tiny eeprom	*/
 #else
-#define CFG_FLASH_SIZE		(1024 * 1024)	/* Unity has onboard 1MByte flash */
+#define CONFIG_SYS_FLASH_SIZE		(1024 * 1024)	/* Unity has onboard 1MByte flash */
 #endif
-#define CFG_ENV_IS_IN_FLASH	1
-#define CFG_ENV_OFFSET		0x00004000	/* Offset of Environment Sector */
-#define CFG_ENV_SIZE		0x00002000	/* Total Size of Environment Sector */
+#define CONFIG_ENV_IS_IN_FLASH	1
+#define CONFIG_ENV_OFFSET		0x00004000	/* Offset of Environment Sector */
+#define CONFIG_ENV_SIZE		0x00002000	/* Total Size of Environment Sector */
 
-#define CFG_MALLOC_LEN		(512 << 10)	/* Reserve 512 kB for malloc()	*/
+#define CONFIG_SYS_MALLOC_LEN		(512 << 10)	/* Reserve 512 kB for malloc()	*/
 
-#define CFG_MEMTEST_START	0x00000000	/* memtest works on		*/
-#define CFG_MEMTEST_END		0x04000000	/* 0 ... 32 MB in DRAM		*/
+#define CONFIG_SYS_MEMTEST_START	0x00000000	/* memtest works on		*/
+#define CONFIG_SYS_MEMTEST_END		0x04000000	/* 0 ... 32 MB in DRAM		*/
 
-#define CFG_EUMB_ADDR		0xFC000000
+#define CONFIG_SYS_EUMB_ADDR		0xFC000000
 
-#define CFG_ISA_MEM		0xFD000000
-#define CFG_ISA_IO		0xFE000000
+#define CONFIG_SYS_ISA_MEM		0xFD000000
+#define CONFIG_SYS_ISA_IO		0xFE000000
 
-#define CFG_FLASH_RANGE_BASE	0xFF000000	/* flash memory address range	*/
-#define CFG_FLASH_RANGE_SIZE	0x01000000
+#define CONFIG_SYS_FLASH_RANGE_BASE	0xFF000000	/* flash memory address range	*/
+#define CONFIG_SYS_FLASH_RANGE_SIZE	0x01000000
 #define FLASH_BASE0_PRELIM	0xFFF00000	/* sandpoint flash		*/
 #define FLASH_BASE1_PRELIM	0xFF000000	/* PMC onboard flash		*/
 
@@ -204,8 +204,8 @@
  */
 #define CONFIG_HARD_I2C		1		/* To enable I2C support	*/
 #undef  CONFIG_SOFT_I2C				/* I2C bit-banged		*/
-#define CFG_I2C_SPEED		400000		/* I2C speed and slave address	*/
-#define CFG_I2C_SLAVE		0x7F
+#define CONFIG_SYS_I2C_SPEED		400000		/* I2C speed and slave address	*/
+#define CONFIG_SYS_I2C_SLAVE		0x7F
 
 #ifdef CONFIG_SOFT_I2C
 #error "Soft I2C is not configured properly.  Please review!"
@@ -221,14 +221,14 @@
 #endif /* CONFIG_SOFT_I2C */
 
 
-#define CFG_I2C_EEPROM_ADDR	0x57		/* EEPROM IS24C02		*/
-#define CFG_I2C_EEPROM_ADDR_LEN	1		/* Bytes of address		*/
-#define CFG_EEPROM_PAGE_WRITE_BITS	3	/* write page size		*/
-#define CFG_EEPROM_PAGE_WRITE_DELAY_MS	10	/* takes up to 10 msec		*/
+#define CONFIG_SYS_I2C_EEPROM_ADDR	0x57		/* EEPROM IS24C02		*/
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN	1		/* Bytes of address		*/
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS	3	/* write page size		*/
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	10	/* takes up to 10 msec		*/
 
 
-#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
-#define CFG_FLASH_BANKS		{ FLASH_BASE0_PRELIM , FLASH_BASE1_PRELIM }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+#define CONFIG_SYS_FLASH_BANKS		{ FLASH_BASE0_PRELIM , FLASH_BASE1_PRELIM }
 
 /*-----------------------------------------------------------------------
  * Definitions for initial stack pointer and data area (in DPRAM)
@@ -236,46 +236,46 @@
 
 
 #define CONFIG_WINBOND_83C553	1	/*has a winbond bridge			*/
-#define CFG_USE_WINBOND_IDE	0	/*use winbond 83c553 internal IDE ctrlr */
-#define CFG_WINBOND_ISA_CFG_ADDR    0x80005800	/*pci-isa bridge config addr	*/
-#define CFG_WINBOND_IDE_CFG_ADDR    0x80005900	/*ide config addr		*/
+#define CONFIG_SYS_USE_WINBOND_IDE	0	/*use winbond 83c553 internal IDE ctrlr */
+#define CONFIG_SYS_WINBOND_ISA_CFG_ADDR    0x80005800	/*pci-isa bridge config addr	*/
+#define CONFIG_SYS_WINBOND_IDE_CFG_ADDR    0x80005900	/*ide config addr		*/
 
-#define CFG_IDE_MAXBUS		2   /* max. 2 IDE busses	*/
-#define CFG_IDE_MAXDEVICE	(CFG_IDE_MAXBUS*2) /* max. 2 drives per IDE bus */
+#define CONFIG_SYS_IDE_MAXBUS		2   /* max. 2 IDE busses	*/
+#define CONFIG_SYS_IDE_MAXDEVICE	(CONFIG_SYS_IDE_MAXBUS*2) /* max. 2 drives per IDE bus */
 
 /*
  * NS87308 Configuration
  */
 #define CONFIG_NS87308			/* Nat Semi super-io controller on ISA bus */
 
-#define CFG_NS87308_BADDR_10	1
+#define CONFIG_SYS_NS87308_BADDR_10	1
 
-#define CFG_NS87308_DEVS	( CFG_NS87308_UART1   | \
-				  CFG_NS87308_UART2   | \
-				  CFG_NS87308_POWRMAN | \
-				  CFG_NS87308_RTC_APC )
+#define CONFIG_SYS_NS87308_DEVS	( CONFIG_SYS_NS87308_UART1   | \
+				  CONFIG_SYS_NS87308_UART2   | \
+				  CONFIG_SYS_NS87308_POWRMAN | \
+				  CONFIG_SYS_NS87308_RTC_APC )
 
-#undef  CFG_NS87308_PS2MOD
+#undef  CONFIG_SYS_NS87308_PS2MOD
 
-#define CFG_NS87308_CS0_BASE	0x0076
-#define CFG_NS87308_CS0_CONF	0x30
-#define CFG_NS87308_CS1_BASE	0x0075
-#define CFG_NS87308_CS1_CONF	0x30
-#define CFG_NS87308_CS2_BASE	0x0074
-#define CFG_NS87308_CS2_CONF	0x30
+#define CONFIG_SYS_NS87308_CS0_BASE	0x0076
+#define CONFIG_SYS_NS87308_CS0_CONF	0x30
+#define CONFIG_SYS_NS87308_CS1_BASE	0x0075
+#define CONFIG_SYS_NS87308_CS1_CONF	0x30
+#define CONFIG_SYS_NS87308_CS2_BASE	0x0074
+#define CONFIG_SYS_NS87308_CS2_CONF	0x30
 
 /*
  * NS16550 Configuration
  */
-#define CFG_NS16550
-#define CFG_NS16550_SERIAL
+#define CONFIG_SYS_NS16550
+#define CONFIG_SYS_NS16550_SERIAL
 
-#define CFG_NS16550_REG_SIZE	1
+#define CONFIG_SYS_NS16550_REG_SIZE	1
 
-#define CFG_NS16550_CLK		1843200
+#define CONFIG_SYS_NS16550_CLK		1843200
 
-#define CFG_NS16550_COM1	(CFG_ISA_IO + CFG_NS87308_UART1_BASE)
-#define CFG_NS16550_COM2	(CFG_ISA_IO + CFG_NS87308_UART2_BASE)
+#define CONFIG_SYS_NS16550_COM1	(CONFIG_SYS_ISA_IO + CONFIG_SYS_NS87308_UART1_BASE)
+#define CONFIG_SYS_NS16550_COM2	(CONFIG_SYS_ISA_IO + CONFIG_SYS_NS87308_UART2_BASE)
 
 /*
  * Low Level Configuration Settings
@@ -286,23 +286,23 @@
 #define CONFIG_SYS_CLK_FREQ  33000000	/* external frequency to pll */
 #define CONFIG_PLL_PCI_TO_MEM_MULTIPLIER  1
 
-#define CFG_ROMNAL		7	/*rom/flash next access time		*/
-#define CFG_ROMFAL		11	/*rom/flash access time			*/
+#define CONFIG_SYS_ROMNAL		7	/*rom/flash next access time		*/
+#define CONFIG_SYS_ROMFAL		11	/*rom/flash access time			*/
 
-#define CFG_REFINT	430	/* no of clock cycles between CBR refresh cycles */
+#define CONFIG_SYS_REFINT	430	/* no of clock cycles between CBR refresh cycles */
 
 /* the following are for SDRAM only*/
-#define CFG_BSTOPRE	121	/* Burst To Precharge, sets open page interval */
-#define CFG_REFREC		8	/* Refresh to activate interval		*/
-#define CFG_RDLAT		4	/* data latency from read command	*/
-#define CFG_PRETOACT		3	/* Precharge to activate interval	*/
-#define CFG_ACTTOPRE		5	/* Activate to Precharge interval	*/
-#define CFG_ACTORW		3	/* Activate to R/W			*/
-#define CFG_SDMODE_CAS_LAT	3	/* SDMODE CAS latency			*/
-#define CFG_SDMODE_WRAP		0	/* SDMODE wrap type			*/
-#define CFG_SDMODE_BURSTLEN	2	/* SDMODE Burst length 2=4, 3=8		*/
-
-#define CFG_REGISTERD_TYPE_BUFFER   1
+#define CONFIG_SYS_BSTOPRE	121	/* Burst To Precharge, sets open page interval */
+#define CONFIG_SYS_REFREC		8	/* Refresh to activate interval		*/
+#define CONFIG_SYS_RDLAT		4	/* data latency from read command	*/
+#define CONFIG_SYS_PRETOACT		3	/* Precharge to activate interval	*/
+#define CONFIG_SYS_ACTTOPRE		5	/* Activate to Precharge interval	*/
+#define CONFIG_SYS_ACTORW		3	/* Activate to R/W			*/
+#define CONFIG_SYS_SDMODE_CAS_LAT	3	/* SDMODE CAS latency			*/
+#define CONFIG_SYS_SDMODE_WRAP		0	/* SDMODE wrap type			*/
+#define CONFIG_SYS_SDMODE_BURSTLEN	2	/* SDMODE Burst length 2=4, 3=8		*/
+
+#define CONFIG_SYS_REGISTERD_TYPE_BUFFER   1
 
 /* memory bank settings*/
 /*
@@ -311,93 +311,93 @@
  * bits will be set to 0x00000 for a start address, or 0xfffff for an
  * end address
  */
-#define CFG_BANK0_START		0x00000000
-#define CFG_BANK0_END		(CFG_MAX_RAM_SIZE - 1)
-#define CFG_BANK0_ENABLE	1
-#define CFG_BANK1_START		0x3ff00000
-#define CFG_BANK1_END		0x3fffffff
-#define CFG_BANK1_ENABLE	0
-#define CFG_BANK2_START		0x3ff00000
-#define CFG_BANK2_END		0x3fffffff
-#define CFG_BANK2_ENABLE	0
-#define CFG_BANK3_START		0x3ff00000
-#define CFG_BANK3_END		0x3fffffff
-#define CFG_BANK3_ENABLE	0
-#define CFG_BANK4_START		0x00000000
-#define CFG_BANK4_END		0x00000000
-#define CFG_BANK4_ENABLE	0
-#define CFG_BANK5_START		0x00000000
-#define CFG_BANK5_END		0x00000000
-#define CFG_BANK5_ENABLE	0
-#define CFG_BANK6_START		0x00000000
-#define CFG_BANK6_END		0x00000000
-#define CFG_BANK6_ENABLE	0
-#define CFG_BANK7_START		0x00000000
-#define CFG_BANK7_END		0x00000000
-#define CFG_BANK7_ENABLE	0
+#define CONFIG_SYS_BANK0_START		0x00000000
+#define CONFIG_SYS_BANK0_END		(CONFIG_SYS_MAX_RAM_SIZE - 1)
+#define CONFIG_SYS_BANK0_ENABLE	1
+#define CONFIG_SYS_BANK1_START		0x3ff00000
+#define CONFIG_SYS_BANK1_END		0x3fffffff
+#define CONFIG_SYS_BANK1_ENABLE	0
+#define CONFIG_SYS_BANK2_START		0x3ff00000
+#define CONFIG_SYS_BANK2_END		0x3fffffff
+#define CONFIG_SYS_BANK2_ENABLE	0
+#define CONFIG_SYS_BANK3_START		0x3ff00000
+#define CONFIG_SYS_BANK3_END		0x3fffffff
+#define CONFIG_SYS_BANK3_ENABLE	0
+#define CONFIG_SYS_BANK4_START		0x00000000
+#define CONFIG_SYS_BANK4_END		0x00000000
+#define CONFIG_SYS_BANK4_ENABLE	0
+#define CONFIG_SYS_BANK5_START		0x00000000
+#define CONFIG_SYS_BANK5_END		0x00000000
+#define CONFIG_SYS_BANK5_ENABLE	0
+#define CONFIG_SYS_BANK6_START		0x00000000
+#define CONFIG_SYS_BANK6_END		0x00000000
+#define CONFIG_SYS_BANK6_ENABLE	0
+#define CONFIG_SYS_BANK7_START		0x00000000
+#define CONFIG_SYS_BANK7_END		0x00000000
+#define CONFIG_SYS_BANK7_ENABLE	0
 /*
  * Memory bank enable bitmask, specifying which of the banks defined above
  are actually present. MSB is for bank #7, LSB is for bank #0.
  */
-#define CFG_BANK_ENABLE		0x01
+#define CONFIG_SYS_BANK_ENABLE		0x01
 
-#define CFG_ODCR		0xff	/* configures line driver impedances,	*/
+#define CONFIG_SYS_ODCR		0xff	/* configures line driver impedances,	*/
 					/* see 8240 book for bit definitions	*/
-#define CFG_PGMAX		0x32	/* how long the 8240 retains the	*/
+#define CONFIG_SYS_PGMAX		0x32	/* how long the 8240 retains the	*/
 					/* currently accessed page in memory	*/
 					/* see 8240 book for details		*/
 
 /* SDRAM 0 - 256MB */
-#define CFG_IBAT0L	(CFG_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
-#define CFG_IBAT0U	(CFG_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CONFIG_SYS_IBAT0L	(CONFIG_SYS_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
+#define CONFIG_SYS_IBAT0U	(CONFIG_SYS_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
 
 /* stack in DCACHE @ 1GB (no backing mem) */
 #if defined(USE_DINK32)
-#define CFG_IBAT1L	(0x40000000 | BATL_PP_00 )
-#define CFG_IBAT1U	(0x40000000 | BATU_BL_128K )
+#define CONFIG_SYS_IBAT1L	(0x40000000 | BATL_PP_00 )
+#define CONFIG_SYS_IBAT1U	(0x40000000 | BATU_BL_128K )
 #else
-#define CFG_IBAT1L	(CFG_INIT_RAM_ADDR | BATL_PP_10 | BATL_MEMCOHERENCE)
-#define CFG_IBAT1U	(CFG_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP)
+#define CONFIG_SYS_IBAT1L	(CONFIG_SYS_INIT_RAM_ADDR | BATL_PP_10 | BATL_MEMCOHERENCE)
+#define CONFIG_SYS_IBAT1U	(CONFIG_SYS_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP)
 #endif
 
 /* PCI memory */
-#define CFG_IBAT2L	(0x80000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
-#define CFG_IBAT2U	(0x80000000 | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CONFIG_SYS_IBAT2L	(0x80000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
+#define CONFIG_SYS_IBAT2U	(0x80000000 | BATU_BL_256M | BATU_VS | BATU_VP)
 
 /* Flash, config addrs, etc */
-#define CFG_IBAT3L	(0xF0000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
-#define CFG_IBAT3U	(0xF0000000 | BATU_BL_256M | BATU_VS | BATU_VP)
-
-#define CFG_DBAT0L	CFG_IBAT0L
-#define CFG_DBAT0U	CFG_IBAT0U
-#define CFG_DBAT1L	CFG_IBAT1L
-#define CFG_DBAT1U	CFG_IBAT1U
-#define CFG_DBAT2L	CFG_IBAT2L
-#define CFG_DBAT2U	CFG_IBAT2U
-#define CFG_DBAT3L	CFG_IBAT3L
-#define CFG_DBAT3U	CFG_IBAT3U
+#define CONFIG_SYS_IBAT3L	(0xF0000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
+#define CONFIG_SYS_IBAT3U	(0xF0000000 | BATU_BL_256M | BATU_VS | BATU_VP)
+
+#define CONFIG_SYS_DBAT0L	CONFIG_SYS_IBAT0L
+#define CONFIG_SYS_DBAT0U	CONFIG_SYS_IBAT0U
+#define CONFIG_SYS_DBAT1L	CONFIG_SYS_IBAT1L
+#define CONFIG_SYS_DBAT1U	CONFIG_SYS_IBAT1U
+#define CONFIG_SYS_DBAT2L	CONFIG_SYS_IBAT2L
+#define CONFIG_SYS_DBAT2U	CONFIG_SYS_IBAT2U
+#define CONFIG_SYS_DBAT3L	CONFIG_SYS_IBAT3L
+#define CONFIG_SYS_DBAT3U	CONFIG_SYS_IBAT3U
 
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
+#define CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
 /*-----------------------------------------------------------------------
  * FLASH organization
  */
-#define CFG_MAX_FLASH_BANKS	2	/* max number of memory banks		*/
-#define CFG_MAX_FLASH_SECT	20	/* max number of sectors on one chip	*/
+#define CONFIG_SYS_MAX_FLASH_BANKS	2	/* max number of memory banks		*/
+#define CONFIG_SYS_MAX_FLASH_SECT	20	/* max number of sectors on one chip	*/
 
-#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
-#define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
+#define CONFIG_SYS_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
+#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
 
 /*-----------------------------------------------------------------------
  * Cache Configuration
  */
-#define CFG_CACHELINE_SIZE	32	/* For MPC8240 CPU			*/
+#define CONFIG_SYS_CACHELINE_SIZE	32	/* For MPC8240 CPU			*/
 #if defined(CONFIG_CMD_KGDB)
-#  define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value */
+#  define CONFIG_SYS_CACHELINE_SHIFT	5	/* log base 2 of the above value */
 #endif
 
 
diff --git a/include/configs/Sandpoint8245.h b/include/configs/Sandpoint8245.h
index c0f2c5796..8cb920e0a 100644
--- a/include/configs/Sandpoint8245.h
+++ b/include/configs/Sandpoint8245.h
@@ -78,14 +78,14 @@
 /*
  * Miscellaneous configurable options
  */
-#define CFG_LONGHELP		1		/* undef to save memory		*/
-#define CFG_PROMPT		"=> "		/* Monitor Command Prompt	*/
-#define CFG_CBSIZE		256		/* Console I/O Buffer Size	*/
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16)	/* Print Buffer Size	*/
-#define CFG_MAXARGS		16		/* max number of command args	*/
-#define CFG_BARGSIZE		CFG_CBSIZE	/* Boot Argument Buffer Size	*/
-#define CFG_LOAD_ADDR		0x00100000	/* default load address		*/
-#define CFG_HZ			1000		/* decrementer freq: 1 ms ticks */
+#define CONFIG_SYS_LONGHELP		1		/* undef to save memory		*/
+#define CONFIG_SYS_PROMPT		"=> "		/* Monitor Command Prompt	*/
+#define CONFIG_SYS_CBSIZE		256		/* Console I/O Buffer Size	*/
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)	/* Print Buffer Size	*/
+#define CONFIG_SYS_MAXARGS		16		/* max number of command args	*/
+#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
+#define CONFIG_SYS_LOAD_ADDR		0x00100000	/* default load address		*/
+#define CONFIG_SYS_HZ			1000		/* decrementer freq: 1 ms ticks */
 
 /*-----------------------------------------------------------------------
  * PCI stuff
@@ -97,7 +97,7 @@
 #define CONFIG_NET_MULTI			/* Multi ethernet cards support */
 
 #define CONFIG_EEPRO100
-#define CFG_RX_ETH_BUFFER	8               /* use 8 rx buffer on eepro100  */
+#define CONFIG_SYS_RX_ETH_BUFFER	8               /* use 8 rx buffer on eepro100  */
 #define CONFIG_NATSEMI
 #define CONFIG_NS8382X
 
@@ -110,58 +110,58 @@
 /*-----------------------------------------------------------------------
  * Start addresses for the final memory configuration
  * (Set up by the startup code)
- * Please note that CFG_SDRAM_BASE _must_ start at 0
+ * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
  */
-#define CFG_SDRAM_BASE		0x00000000
-#define CFG_MAX_RAM_SIZE	0x10000000
+#define CONFIG_SYS_SDRAM_BASE		0x00000000
+#define CONFIG_SYS_MAX_RAM_SIZE	0x10000000
 
-#define CFG_RESET_ADDRESS	0xFFF00100
+#define CONFIG_SYS_RESET_ADDRESS	0xFFF00100
 
 #if defined (USE_DINK32)
-#define CFG_MONITOR_LEN		0x00030000
-#define CFG_MONITOR_BASE	0x00090000
-#define CFG_RAMBOOT		1
-#define CFG_INIT_RAM_ADDR	(CFG_MONITOR_BASE + CFG_MONITOR_LEN)
-#define CFG_INIT_RAM_END	0x10000
-#define CFG_GBL_DATA_SIZE	256  /* size in bytes reserved for initial data */
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_MONITOR_LEN		0x00030000
+#define CONFIG_SYS_MONITOR_BASE	0x00090000
+#define CONFIG_SYS_RAMBOOT		1
+#define CONFIG_SYS_INIT_RAM_ADDR	(CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)
+#define CONFIG_SYS_INIT_RAM_END	0x10000
+#define CONFIG_SYS_GBL_DATA_SIZE	256  /* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 #else
-#undef	CFG_RAMBOOT
-#define CFG_MONITOR_LEN		0x00030000
-#define CFG_MONITOR_BASE	TEXT_BASE
+#undef	CONFIG_SYS_RAMBOOT
+#define CONFIG_SYS_MONITOR_LEN		0x00030000
+#define CONFIG_SYS_MONITOR_BASE	TEXT_BASE
 
-/*#define CFG_GBL_DATA_SIZE    256*/
-#define CFG_GBL_DATA_SIZE	128
+/*#define CONFIG_SYS_GBL_DATA_SIZE    256*/
+#define CONFIG_SYS_GBL_DATA_SIZE	128
 
-#define CFG_INIT_RAM_ADDR     0x40000000
-#define CFG_INIT_RAM_END      0x1000
-#define CFG_GBL_DATA_OFFSET  (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_RAM_ADDR     0x40000000
+#define CONFIG_SYS_INIT_RAM_END      0x1000
+#define CONFIG_SYS_GBL_DATA_OFFSET  (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
 
 #endif
 
-#define CFG_FLASH_BASE		0xFFF00000
+#define CONFIG_SYS_FLASH_BASE		0xFFF00000
 #if 0
-#define CFG_FLASH_SIZE		(512 * 1024)	/* sandpoint has tiny eeprom	*/
+#define CONFIG_SYS_FLASH_SIZE		(512 * 1024)	/* sandpoint has tiny eeprom	*/
 #else
-#define CFG_FLASH_SIZE		(1024 * 1024)	/* Unity has onboard 1MByte flash */
+#define CONFIG_SYS_FLASH_SIZE		(1024 * 1024)	/* Unity has onboard 1MByte flash */
 #endif
-#define CFG_ENV_IS_IN_FLASH	1
-#define CFG_ENV_OFFSET		0x00004000	/* Offset of Environment Sector */
-#define CFG_ENV_SIZE		0x00002000	/* Total Size of Environment Sector */
+#define CONFIG_ENV_IS_IN_FLASH	1
+#define CONFIG_ENV_OFFSET		0x00004000	/* Offset of Environment Sector */
+#define CONFIG_ENV_SIZE		0x00002000	/* Total Size of Environment Sector */
 
-#define CFG_MALLOC_LEN		(512 << 10)	/* Reserve 512 kB for malloc()	*/
+#define CONFIG_SYS_MALLOC_LEN		(512 << 10)	/* Reserve 512 kB for malloc()	*/
 
-#define CFG_MEMTEST_START	0x00000000	/* memtest works on		*/
-#define CFG_MEMTEST_END		0x04000000	/* 0 ... 32 MB in DRAM		*/
+#define CONFIG_SYS_MEMTEST_START	0x00000000	/* memtest works on		*/
+#define CONFIG_SYS_MEMTEST_END		0x04000000	/* 0 ... 32 MB in DRAM		*/
 
-#define CFG_EUMB_ADDR		0xFC000000
+#define CONFIG_SYS_EUMB_ADDR		0xFC000000
 
-#define CFG_ISA_MEM		0xFD000000
-#define CFG_ISA_IO		0xFE000000
+#define CONFIG_SYS_ISA_MEM		0xFD000000
+#define CONFIG_SYS_ISA_IO		0xFE000000
 
-#define CFG_FLASH_RANGE_BASE	0xFF000000	/* flash memory address range	*/
-#define CFG_FLASH_RANGE_SIZE	0x01000000
+#define CONFIG_SYS_FLASH_RANGE_BASE	0xFF000000	/* flash memory address range	*/
+#define CONFIG_SYS_FLASH_RANGE_SIZE	0x01000000
 #define FLASH_BASE0_PRELIM	0xFFF00000	/* sandpoint flash		*/
 #define FLASH_BASE1_PRELIM	0xFF000000	/* PMC onboard flash		*/
 
@@ -174,8 +174,8 @@
  */
 #define CONFIG_HARD_I2C		1		/* To enable I2C support	*/
 #undef  CONFIG_SOFT_I2C				/* I2C bit-banged		*/
-#define CFG_I2C_SPEED		400000		/* I2C speed and slave address	*/
-#define CFG_I2C_SLAVE		0x7F
+#define CONFIG_SYS_I2C_SPEED		400000		/* I2C speed and slave address	*/
+#define CONFIG_SYS_I2C_SLAVE		0x7F
 
 #ifdef CONFIG_SOFT_I2C
 #error "Soft I2C is not configured properly.  Please review!"
@@ -190,13 +190,13 @@
 #define I2C_DELAY		udelay(5)	/* 1/4 I2C clock duration */
 #endif /* CONFIG_SOFT_I2C */
 
-#define CFG_I2C_EEPROM_ADDR	0x57		/* EEPROM IS24C02		*/
-#define CFG_I2C_EEPROM_ADDR_LEN	1		/* Bytes of address		*/
-#define CFG_EEPROM_PAGE_WRITE_BITS	3
-#define CFG_EEPROM_PAGE_WRITE_DELAY_MS	10	/* and takes up to 10 msec */
+#define CONFIG_SYS_I2C_EEPROM_ADDR	0x57		/* EEPROM IS24C02		*/
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN	1		/* Bytes of address		*/
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS	3
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	10	/* and takes up to 10 msec */
 
-#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
-#define CFG_FLASH_BANKS		{ FLASH_BASE0_PRELIM , FLASH_BASE1_PRELIM }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+#define CONFIG_SYS_FLASH_BANKS		{ FLASH_BASE0_PRELIM , FLASH_BASE1_PRELIM }
 
 /*-----------------------------------------------------------------------
  * Definitions for initial stack pointer and data area (in DPRAM)
@@ -204,52 +204,52 @@
 
 
 #define CONFIG_WINBOND_83C553	1	/*has a winbond bridge			*/
-#define CFG_USE_WINBOND_IDE	0	/*use winbond 83c553 internal IDE ctrlr */
-#define CFG_WINBOND_ISA_CFG_ADDR    0x80005800	/*pci-isa bridge config addr	*/
-#define CFG_WINBOND_IDE_CFG_ADDR    0x80005900	/*ide config addr		*/
+#define CONFIG_SYS_USE_WINBOND_IDE	0	/*use winbond 83c553 internal IDE ctrlr */
+#define CONFIG_SYS_WINBOND_ISA_CFG_ADDR    0x80005800	/*pci-isa bridge config addr	*/
+#define CONFIG_SYS_WINBOND_IDE_CFG_ADDR    0x80005900	/*ide config addr		*/
 
-#define CFG_IDE_MAXBUS		2   /* max. 2 IDE busses	*/
-#define CFG_IDE_MAXDEVICE	(CFG_IDE_MAXBUS*2) /* max. 2 drives per IDE bus */
+#define CONFIG_SYS_IDE_MAXBUS		2   /* max. 2 IDE busses	*/
+#define CONFIG_SYS_IDE_MAXDEVICE	(CONFIG_SYS_IDE_MAXBUS*2) /* max. 2 drives per IDE bus */
 
 /*
  * NS87308 Configuration
  */
 #define CONFIG_NS87308			/* Nat Semi super-io controller on ISA bus */
 
-#define CFG_NS87308_BADDR_10	1
+#define CONFIG_SYS_NS87308_BADDR_10	1
 
-#define CFG_NS87308_DEVS	( CFG_NS87308_UART1   | \
-				  CFG_NS87308_UART2   | \
-				  CFG_NS87308_POWRMAN | \
-				  CFG_NS87308_RTC_APC )
+#define CONFIG_SYS_NS87308_DEVS	( CONFIG_SYS_NS87308_UART1   | \
+				  CONFIG_SYS_NS87308_UART2   | \
+				  CONFIG_SYS_NS87308_POWRMAN | \
+				  CONFIG_SYS_NS87308_RTC_APC )
 
-#undef  CFG_NS87308_PS2MOD
+#undef  CONFIG_SYS_NS87308_PS2MOD
 
-#define CFG_NS87308_CS0_BASE	0x0076
-#define CFG_NS87308_CS0_CONF	0x30
-#define CFG_NS87308_CS1_BASE	0x0075
-#define CFG_NS87308_CS1_CONF	0x30
-#define CFG_NS87308_CS2_BASE	0x0074
-#define CFG_NS87308_CS2_CONF	0x30
+#define CONFIG_SYS_NS87308_CS0_BASE	0x0076
+#define CONFIG_SYS_NS87308_CS0_CONF	0x30
+#define CONFIG_SYS_NS87308_CS1_BASE	0x0075
+#define CONFIG_SYS_NS87308_CS1_CONF	0x30
+#define CONFIG_SYS_NS87308_CS2_BASE	0x0074
+#define CONFIG_SYS_NS87308_CS2_CONF	0x30
 
 /*
  * NS16550 Configuration
  */
-#define CFG_NS16550
-#define CFG_NS16550_SERIAL
+#define CONFIG_SYS_NS16550
+#define CONFIG_SYS_NS16550_SERIAL
 
-#define CFG_NS16550_REG_SIZE	1
+#define CONFIG_SYS_NS16550_REG_SIZE	1
 
 #if (CONFIG_CONS_INDEX > 2)
-#define CFG_NS16550_CLK         CONFIG_DRAM_SPEED*1000000
+#define CONFIG_SYS_NS16550_CLK         CONFIG_DRAM_SPEED*1000000
 #else
-#define CFG_NS16550_CLK         1843200
+#define CONFIG_SYS_NS16550_CLK         1843200
 #endif
 
-#define CFG_NS16550_COM1	(CFG_ISA_IO + CFG_NS87308_UART1_BASE)
-#define CFG_NS16550_COM2	(CFG_ISA_IO + CFG_NS87308_UART2_BASE)
-#define CFG_NS16550_COM3	(CFG_EUMB_ADDR + 0x4500)
-#define CFG_NS16550_COM4	(CFG_EUMB_ADDR + 0x4600)
+#define CONFIG_SYS_NS16550_COM1	(CONFIG_SYS_ISA_IO + CONFIG_SYS_NS87308_UART1_BASE)
+#define CONFIG_SYS_NS16550_COM2	(CONFIG_SYS_ISA_IO + CONFIG_SYS_NS87308_UART2_BASE)
+#define CONFIG_SYS_NS16550_COM3	(CONFIG_SYS_EUMB_ADDR + 0x4500)
+#define CONFIG_SYS_NS16550_COM4	(CONFIG_SYS_EUMB_ADDR + 0x4600)
 
 /*
  * Low Level Configuration Settings
@@ -259,27 +259,27 @@
 
 #define CONFIG_SYS_CLK_FREQ  33333333	/* external frequency to pll */
 
-#define CFG_ROMNAL		7	/*rom/flash next access time		*/
-#define CFG_ROMFAL		11	/*rom/flash access time			*/
+#define CONFIG_SYS_ROMNAL		7	/*rom/flash next access time		*/
+#define CONFIG_SYS_ROMFAL		11	/*rom/flash access time			*/
 
-#define CFG_REFINT	430	/* no of clock cycles between CBR refresh cycles */
+#define CONFIG_SYS_REFINT	430	/* no of clock cycles between CBR refresh cycles */
 
 /* the following are for SDRAM only*/
-#define CFG_BSTOPRE	121	/* Burst To Precharge, sets open page interval */
-#define CFG_REFREC		8	/* Refresh to activate interval		*/
-#define CFG_RDLAT		4	/* data latency from read command	*/
-#define CFG_PRETOACT		3	/* Precharge to activate interval	*/
-#define CFG_ACTTOPRE		5	/* Activate to Precharge interval	*/
-#define CFG_ACTORW		3	/* Activate to R/W			*/
-#define CFG_SDMODE_CAS_LAT	3	/* SDMODE CAS latency			*/
-#define CFG_SDMODE_WRAP		0	/* SDMODE wrap type			*/
+#define CONFIG_SYS_BSTOPRE	121	/* Burst To Precharge, sets open page interval */
+#define CONFIG_SYS_REFREC		8	/* Refresh to activate interval		*/
+#define CONFIG_SYS_RDLAT		4	/* data latency from read command	*/
+#define CONFIG_SYS_PRETOACT		3	/* Precharge to activate interval	*/
+#define CONFIG_SYS_ACTTOPRE		5	/* Activate to Precharge interval	*/
+#define CONFIG_SYS_ACTORW		3	/* Activate to R/W			*/
+#define CONFIG_SYS_SDMODE_CAS_LAT	3	/* SDMODE CAS latency			*/
+#define CONFIG_SYS_SDMODE_WRAP		0	/* SDMODE wrap type			*/
 #if 0
-#define CFG_SDMODE_BURSTLEN	2	/* OBSOLETE!  SDMODE Burst length 2=4, 3=8		*/
+#define CONFIG_SYS_SDMODE_BURSTLEN	2	/* OBSOLETE!  SDMODE Burst length 2=4, 3=8		*/
 #endif
 
-#define CFG_REGISTERD_TYPE_BUFFER   1
-#define CFG_EXTROM 1
-#define CFG_REGDIMM 0
+#define CONFIG_SYS_REGISTERD_TYPE_BUFFER   1
+#define CONFIG_SYS_EXTROM 1
+#define CONFIG_SYS_REGDIMM 0
 
 
 /* memory bank settings*/
@@ -289,93 +289,93 @@
  * bits will be set to 0x00000 for a start address, or 0xfffff for an
  * end address
  */
-#define CFG_BANK0_START		0x00000000
-#define CFG_BANK0_END		(CFG_MAX_RAM_SIZE - 1)
-#define CFG_BANK0_ENABLE	1
-#define CFG_BANK1_START		0x3ff00000
-#define CFG_BANK1_END		0x3fffffff
-#define CFG_BANK1_ENABLE	0
-#define CFG_BANK2_START		0x3ff00000
-#define CFG_BANK2_END		0x3fffffff
-#define CFG_BANK2_ENABLE	0
-#define CFG_BANK3_START		0x3ff00000
-#define CFG_BANK3_END		0x3fffffff
-#define CFG_BANK3_ENABLE	0
-#define CFG_BANK4_START		0x00000000
-#define CFG_BANK4_END		0x00000000
-#define CFG_BANK4_ENABLE	0
-#define CFG_BANK5_START		0x00000000
-#define CFG_BANK5_END		0x00000000
-#define CFG_BANK5_ENABLE	0
-#define CFG_BANK6_START		0x00000000
-#define CFG_BANK6_END		0x00000000
-#define CFG_BANK6_ENABLE	0
-#define CFG_BANK7_START		0x00000000
-#define CFG_BANK7_END		0x00000000
-#define CFG_BANK7_ENABLE	0
+#define CONFIG_SYS_BANK0_START		0x00000000
+#define CONFIG_SYS_BANK0_END		(CONFIG_SYS_MAX_RAM_SIZE - 1)
+#define CONFIG_SYS_BANK0_ENABLE	1
+#define CONFIG_SYS_BANK1_START		0x3ff00000
+#define CONFIG_SYS_BANK1_END		0x3fffffff
+#define CONFIG_SYS_BANK1_ENABLE	0
+#define CONFIG_SYS_BANK2_START		0x3ff00000
+#define CONFIG_SYS_BANK2_END		0x3fffffff
+#define CONFIG_SYS_BANK2_ENABLE	0
+#define CONFIG_SYS_BANK3_START		0x3ff00000
+#define CONFIG_SYS_BANK3_END		0x3fffffff
+#define CONFIG_SYS_BANK3_ENABLE	0
+#define CONFIG_SYS_BANK4_START		0x00000000
+#define CONFIG_SYS_BANK4_END		0x00000000
+#define CONFIG_SYS_BANK4_ENABLE	0
+#define CONFIG_SYS_BANK5_START		0x00000000
+#define CONFIG_SYS_BANK5_END		0x00000000
+#define CONFIG_SYS_BANK5_ENABLE	0
+#define CONFIG_SYS_BANK6_START		0x00000000
+#define CONFIG_SYS_BANK6_END		0x00000000
+#define CONFIG_SYS_BANK6_ENABLE	0
+#define CONFIG_SYS_BANK7_START		0x00000000
+#define CONFIG_SYS_BANK7_END		0x00000000
+#define CONFIG_SYS_BANK7_ENABLE	0
 /*
  * Memory bank enable bitmask, specifying which of the banks defined above
  are actually present. MSB is for bank #7, LSB is for bank #0.
  */
-#define CFG_BANK_ENABLE		0x01
+#define CONFIG_SYS_BANK_ENABLE		0x01
 
-#define CFG_ODCR		0xff	/* configures line driver impedances,	*/
+#define CONFIG_SYS_ODCR		0xff	/* configures line driver impedances,	*/
 					/* see 8240 book for bit definitions	*/
-#define CFG_PGMAX		0x32	/* how long the 8240 retains the	*/
+#define CONFIG_SYS_PGMAX		0x32	/* how long the 8240 retains the	*/
 					/* currently accessed page in memory	*/
 					/* see 8240 book for details		*/
 
 /* SDRAM 0 - 256MB */
-#define CFG_IBAT0L	(CFG_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
-#define CFG_IBAT0U	(CFG_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CONFIG_SYS_IBAT0L	(CONFIG_SYS_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
+#define CONFIG_SYS_IBAT0U	(CONFIG_SYS_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
 
 /* stack in DCACHE @ 1GB (no backing mem) */
 #if defined(USE_DINK32)
-#define CFG_IBAT1L	(0x40000000 | BATL_PP_00 )
-#define CFG_IBAT1U	(0x40000000 | BATU_BL_128K )
+#define CONFIG_SYS_IBAT1L	(0x40000000 | BATL_PP_00 )
+#define CONFIG_SYS_IBAT1U	(0x40000000 | BATU_BL_128K )
 #else
-#define CFG_IBAT1L	(CFG_INIT_RAM_ADDR | BATL_PP_10 | BATL_MEMCOHERENCE)
-#define CFG_IBAT1U	(CFG_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP)
+#define CONFIG_SYS_IBAT1L	(CONFIG_SYS_INIT_RAM_ADDR | BATL_PP_10 | BATL_MEMCOHERENCE)
+#define CONFIG_SYS_IBAT1U	(CONFIG_SYS_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP)
 #endif
 
 /* PCI memory */
-#define CFG_IBAT2L	(0x80000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
-#define CFG_IBAT2U	(0x80000000 | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CONFIG_SYS_IBAT2L	(0x80000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
+#define CONFIG_SYS_IBAT2U	(0x80000000 | BATU_BL_256M | BATU_VS | BATU_VP)
 
 /* Flash, config addrs, etc */
-#define CFG_IBAT3L	(0xF0000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
-#define CFG_IBAT3U	(0xF0000000 | BATU_BL_256M | BATU_VS | BATU_VP)
-
-#define CFG_DBAT0L	CFG_IBAT0L
-#define CFG_DBAT0U	CFG_IBAT0U
-#define CFG_DBAT1L	CFG_IBAT1L
-#define CFG_DBAT1U	CFG_IBAT1U
-#define CFG_DBAT2L	CFG_IBAT2L
-#define CFG_DBAT2U	CFG_IBAT2U
-#define CFG_DBAT3L	CFG_IBAT3L
-#define CFG_DBAT3U	CFG_IBAT3U
+#define CONFIG_SYS_IBAT3L	(0xF0000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
+#define CONFIG_SYS_IBAT3U	(0xF0000000 | BATU_BL_256M | BATU_VS | BATU_VP)
+
+#define CONFIG_SYS_DBAT0L	CONFIG_SYS_IBAT0L
+#define CONFIG_SYS_DBAT0U	CONFIG_SYS_IBAT0U
+#define CONFIG_SYS_DBAT1L	CONFIG_SYS_IBAT1L
+#define CONFIG_SYS_DBAT1U	CONFIG_SYS_IBAT1U
+#define CONFIG_SYS_DBAT2L	CONFIG_SYS_IBAT2L
+#define CONFIG_SYS_DBAT2U	CONFIG_SYS_IBAT2U
+#define CONFIG_SYS_DBAT3L	CONFIG_SYS_IBAT3L
+#define CONFIG_SYS_DBAT3U	CONFIG_SYS_IBAT3U
 
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
+#define CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
 /*-----------------------------------------------------------------------
  * FLASH organization
  */
-#define CFG_MAX_FLASH_BANKS	2	/* max number of memory banks		*/
-#define CFG_MAX_FLASH_SECT	20	/* max number of sectors on one chip	*/
+#define CONFIG_SYS_MAX_FLASH_BANKS	2	/* max number of memory banks		*/
+#define CONFIG_SYS_MAX_FLASH_SECT	20	/* max number of sectors on one chip	*/
 
-#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
-#define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
+#define CONFIG_SYS_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
+#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
 
 /*-----------------------------------------------------------------------
  * Cache Configuration
  */
-#define CFG_CACHELINE_SIZE	32	/* For MPC8240 CPU			*/
+#define CONFIG_SYS_CACHELINE_SIZE	32	/* For MPC8240 CPU			*/
 #if defined(CONFIG_CMD_KGDB)
-#  define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value */
+#  define CONFIG_SYS_CACHELINE_SHIFT	5	/* log base 2 of the above value */
 #endif
 
 
diff --git a/include/configs/TASREG.h b/include/configs/TASREG.h
index dccdf0ca9..25f3a26f3 100644
--- a/include/configs/TASREG.h
+++ b/include/configs/TASREG.h
@@ -46,9 +46,9 @@
 #define CONFIG_MCFTMR
 
 #define CONFIG_MCFUART
-#define CFG_UART_PORT		(0)
+#define CONFIG_SYS_UART_PORT		(0)
 #define CONFIG_BAUDRATE		19200
-#define CFG_BAUDRATE_TABLE { 9600 , 19200 , 38400 , 57600, 115200 }
+#define CONFIG_SYS_BAUDRATE_TABLE { 9600 , 19200 , 38400 , 57600, 115200 }
 
 #undef  CONFIG_WATCHDOG
 
@@ -78,51 +78,51 @@
 
 #define CONFIG_BOOTDELAY	3
 
-#define CFG_PROMPT		"=> "
-#define CFG_LONGHELP				/* undef to save memory		*/
+#define CONFIG_SYS_PROMPT		"=> "
+#define CONFIG_SYS_LONGHELP				/* undef to save memory		*/
 
 #if defined(CONFIG_CMD_KGDB)
-#define CFG_CBSIZE		1024		/* Console I/O Buffer Size	*/
+#define CONFIG_SYS_CBSIZE		1024		/* Console I/O Buffer Size	*/
 #else
-#define CFG_CBSIZE		256		/* Console I/O Buffer Size	*/
+#define CONFIG_SYS_CBSIZE		256		/* Console I/O Buffer Size	*/
 #endif
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define CFG_MAXARGS		16		/* max number of command args	*/
-#define CFG_BARGSIZE		CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS		16		/* max number of command args	*/
+#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
 
-#define CFG_DEVICE_NULLDEV	1	/* include nulldev device	*/
-#define CFG_CONSOLE_INFO_QUIET	1	/* don't print console @ startup*/
+#define CONFIG_SYS_DEVICE_NULLDEV	1	/* include nulldev device	*/
+#define CONFIG_SYS_CONSOLE_INFO_QUIET	1	/* don't print console @ startup*/
 #define CONFIG_AUTO_COMPLETE	1       /* add autocompletion support   */
 #define CONFIG_LOOPW            1       /* enable loopw command         */
 #define CONFIG_MX_CYCLIC        1       /* enable mdc/mwc commands      */
 
-#define CFG_LOAD_ADDR	        0x200000	/* default load address */
+#define CONFIG_SYS_LOAD_ADDR	        0x200000	/* default load address */
 
-#define CFG_MEMTEST_START	0x400
-#define CFG_MEMTEST_END		0x380000
+#define CONFIG_SYS_MEMTEST_START	0x400
+#define CONFIG_SYS_MEMTEST_END		0x380000
 
-#define CFG_HZ			1000
+#define CONFIG_SYS_HZ			1000
 
 /*
  * Clock configuration: enable only one of the following options
  */
 
 #if 0 /* this setting will run the cpu at 11MHz */
-#define CFG_PLL_BYPASS          1                /* bypass PLL for test purpose */
-#undef  CFG_FAST_CLK                             /* MCF5249 can run at 140MHz   */
-#define CFG_CLK		        11289600         /* PLL bypass                  */
+#define CONFIG_SYS_PLL_BYPASS          1                /* bypass PLL for test purpose */
+#undef  CONFIG_SYS_FAST_CLK                             /* MCF5249 can run at 140MHz   */
+#define CONFIG_SYS_CLK		        11289600         /* PLL bypass                  */
 #endif
 
 #if 0 /* this setting will run the cpu at 70MHz */
-#undef  CFG_PLL_BYPASS                           /* bypass PLL for test purpose */
-#undef  CFG_FAST_CLK                             /* MCF5249 can run at 140MHz   */
-#define CFG_CLK		        72185018         /* The next lower speed        */
+#undef  CONFIG_SYS_PLL_BYPASS                           /* bypass PLL for test purpose */
+#undef  CONFIG_SYS_FAST_CLK                             /* MCF5249 can run at 140MHz   */
+#define CONFIG_SYS_CLK		        72185018         /* The next lower speed        */
 #endif
 
 #if 1 /* this setting will run the cpu at 140MHz */
-#undef  CFG_PLL_BYPASS                           /* bypass PLL for test purpose */
-#define CFG_FAST_CLK            1                /* MCF5249 can run at 140MHz   */
-#define	CFG_CLK		        132025600        /* MCF5249 can run at 140MHz   */
+#undef  CONFIG_SYS_PLL_BYPASS                           /* bypass PLL for test purpose */
+#define CONFIG_SYS_FAST_CLK            1                /* MCF5249 can run at 140MHz   */
+#define	CONFIG_SYS_CLK		        132025600        /* MCF5249 can run at 140MHz   */
 #endif
 
 /*
@@ -131,35 +131,34 @@
  * You should know what you are doing if you make changes here.
  */
 
-#define CFG_MBAR		0x10000000	/* Register Base Addrs */
-#define	CFG_MBAR2	        0x80000000
+#define CONFIG_SYS_MBAR		0x10000000	/* Register Base Addrs */
+#define	CONFIG_SYS_MBAR2	        0x80000000
 
 /*-----------------------------------------------------------------------
  * I2C
  */
 #define	CONFIG_SOFT_I2C
-#define CFG_I2C_SPEED		100000	/* I2C speed and slave address */
-#define CFG_I2C_SLAVE		0x7F
-#define CFG_I2C_EEPROM_ADDR	0x50	/* EEPROM CAT28WC32		*/
-#define CFG_I2C_EEPROM_ADDR_LEN 2	/* Bytes of address		*/
+#define CONFIG_SYS_I2C_SPEED		100000	/* I2C speed and slave address */
+#define CONFIG_SYS_I2C_SLAVE		0x7F
+#define CONFIG_SYS_I2C_EEPROM_ADDR	0x50	/* EEPROM CAT28WC32		*/
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2	/* Bytes of address		*/
 /* mask of address bits that overflow into the "EEPROM chip address"	*/
-#define CFG_I2C_EEPROM_ADDR_OVERFLOW	0x01
-#define CFG_EEPROM_PAGE_WRITE_BITS 5	/* The Catalyst CAT24WC32 has	*/
+#define CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW	0x01
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 5	/* The Catalyst CAT24WC32 has	*/
 					/* 32 byte page write mode using*/
 					/* last 5 bits of the address	*/
-#define CFG_EEPROM_PAGE_WRITE_DELAY_MS	10   /* and takes up to 10 msec */
-#define CFG_EEPROM_PAGE_WRITE_ENABLE
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	10   /* and takes up to 10 msec */
 
 #if defined (CONFIG_SOFT_I2C)
 #if 0 /* push-pull */
 #define	SDA	        0x00800000
 #define	SCL	        0x00000008
-#define DIR0            *((volatile ulong*)(CFG_MBAR2+MCFSIM_GPIO_EN))
-#define DIR1            *((volatile ulong*)(CFG_MBAR2+MCFSIM_GPIO1_EN))
-#define OUT0	        *((volatile ulong*)(CFG_MBAR2+MCFSIM_GPIO_OUT))
-#define OUT1	        *((volatile ulong*)(CFG_MBAR2+MCFSIM_GPIO1_OUT))
-#define IN0	        *((volatile ulong*)(CFG_MBAR2+MCFSIM_GPIO_READ))
-#define IN1	        *((volatile ulong*)(CFG_MBAR2+MCFSIM_GPIO1_READ))
+#define DIR0            *((volatile ulong*)(CONFIG_SYS_MBAR2+MCFSIM_GPIO_EN))
+#define DIR1            *((volatile ulong*)(CONFIG_SYS_MBAR2+MCFSIM_GPIO1_EN))
+#define OUT0	        *((volatile ulong*)(CONFIG_SYS_MBAR2+MCFSIM_GPIO_OUT))
+#define OUT1	        *((volatile ulong*)(CONFIG_SYS_MBAR2+MCFSIM_GPIO1_OUT))
+#define IN0	        *((volatile ulong*)(CONFIG_SYS_MBAR2+MCFSIM_GPIO_READ))
+#define IN1	        *((volatile ulong*)(CONFIG_SYS_MBAR2+MCFSIM_GPIO1_READ))
 #define	I2C_INIT	{OUT1|=SDA;OUT0|=SCL;}
 #define	I2C_READ	((IN1&SDA)?1:0)
 #define	I2C_SDA(x)	{if(x)OUT1|=SDA;else OUT1&=~SDA;}
@@ -170,12 +169,12 @@
 #else /* open-collector */
 #define	SDA	        0x00800000
 #define	SCL	        0x00000008
-#define DIR0            *((volatile ulong*)(CFG_MBAR2+MCFSIM_GPIO_EN))
-#define DIR1            *((volatile ulong*)(CFG_MBAR2+MCFSIM_GPIO1_EN))
-#define OUT0	        *((volatile ulong*)(CFG_MBAR2+MCFSIM_GPIO_OUT))
-#define OUT1	        *((volatile ulong*)(CFG_MBAR2+MCFSIM_GPIO1_OUT))
-#define IN0	        *((volatile ulong*)(CFG_MBAR2+MCFSIM_GPIO_READ))
-#define IN1	        *((volatile ulong*)(CFG_MBAR2+MCFSIM_GPIO1_READ))
+#define DIR0            *((volatile ulong*)(CONFIG_SYS_MBAR2+MCFSIM_GPIO_EN))
+#define DIR1            *((volatile ulong*)(CONFIG_SYS_MBAR2+MCFSIM_GPIO1_EN))
+#define OUT0	        *((volatile ulong*)(CONFIG_SYS_MBAR2+MCFSIM_GPIO_OUT))
+#define OUT1	        *((volatile ulong*)(CONFIG_SYS_MBAR2+MCFSIM_GPIO1_OUT))
+#define IN0	        *((volatile ulong*)(CONFIG_SYS_MBAR2+MCFSIM_GPIO_READ))
+#define IN1	        *((volatile ulong*)(CONFIG_SYS_MBAR2+MCFSIM_GPIO1_READ))
 #define	I2C_INIT	{DIR1&=~SDA;DIR0&=~SCL;OUT1&=~SDA;OUT0&=~SCL;}
 #define	I2C_READ	((IN1&SDA)?1:0)
 #define	I2C_SDA(x)	{if(x)DIR1&=~SDA;else DIR1|=SDA;}
@@ -189,108 +188,108 @@
 /*-----------------------------------------------------------------------
  * Definitions for initial stack pointer and data area (in DPRAM)
  */
-#define CFG_INIT_RAM_ADDR	0x20000000
-#define CFG_INIT_RAM_END	0x1000	/* End of used area in internal SRAM	*/
-#define CFG_GBL_DATA_SIZE	64	/* size in bytes reserved for initial data */
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_INIT_RAM_ADDR	0x20000000
+#define CONFIG_SYS_INIT_RAM_END	0x1000	/* End of used area in internal SRAM	*/
+#define CONFIG_SYS_GBL_DATA_SIZE	64	/* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
-#define CFG_ENV_IS_IN_FLASH	1
-#define CFG_ENV_ADDR		0xFFC40000	/* Address of Environment Sector*/
-#define CFG_ENV_SIZE		0x10000	/* Total Size of Environment Sector	*/
-#define CFG_ENV_SECT_SIZE	0x10000 /* see README - env sector total size	*/
+#define CONFIG_ENV_IS_IN_FLASH	1
+#define CONFIG_ENV_ADDR		0xFFC40000	/* Address of Environment Sector*/
+#define CONFIG_ENV_SIZE		0x10000	/* Total Size of Environment Sector	*/
+#define CONFIG_ENV_SECT_SIZE	0x10000 /* see README - env sector total size	*/
 
 /*-----------------------------------------------------------------------
  * Start addresses for the final memory configuration
  * (Set up by the startup code)
- * Please note that CFG_SDRAM_BASE _must_ start at 0
+ * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
  */
-#define CFG_SDRAM_BASE		0x00000000
-#define CFG_SDRAM_SIZE		16		/* SDRAM size in MB */
-#define CFG_FLASH_BASE		0xffc00000
+#define CONFIG_SYS_SDRAM_BASE		0x00000000
+#define CONFIG_SYS_SDRAM_SIZE		16		/* SDRAM size in MB */
+#define CONFIG_SYS_FLASH_BASE		CONFIG_SYS_CS0_BASE
 
 #if 0 /* test-only */
 #define CONFIG_PRAM             512 /* test-only for SDRAM problem!!!!!!!!!!!!!!!!!!!! */
 #endif
 
-#define CFG_MONITOR_BASE	(CFG_FLASH_BASE + 0x400)
+#define CONFIG_SYS_MONITOR_BASE	(CONFIG_SYS_FLASH_BASE + 0x400)
 
-#define CFG_MONITOR_LEN		0x20000
-#define CFG_MALLOC_LEN		(1 * 1024*1024)	/* Reserve 1 MB for malloc()	*/
-#define CFG_BOOTPARAMS_LEN	64*1024
+#define CONFIG_SYS_MONITOR_LEN		0x20000
+#define CONFIG_SYS_MALLOC_LEN		(1 * 1024*1024)	/* Reserve 1 MB for malloc()	*/
+#define CONFIG_SYS_BOOTPARAMS_LEN	64*1024
 
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization ??
  */
-#define CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
+#define CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
 
 /*-----------------------------------------------------------------------
  * FLASH organization
  */
-#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
-#define CFG_MAX_FLASH_SECT	256	/* max number of sectors on one chip	*/
+#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
+#define CONFIG_SYS_MAX_FLASH_SECT	256	/* max number of sectors on one chip	*/
 
-#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
-#define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
+#define CONFIG_SYS_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
+#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
 
-#define CFG_FLASH_WORD_SIZE	unsigned short	/* flash word size (width)	*/
-#define CFG_FLASH_ADDR0		0x5555	/* 1st address for flash config cycles	*/
-#define CFG_FLASH_ADDR1		0x2AAA	/* 2nd address for flash config cycles	*/
+#define CONFIG_SYS_FLASH_WORD_SIZE	unsigned short	/* flash word size (width)	*/
+#define CONFIG_SYS_FLASH_ADDR0		0x5555	/* 1st address for flash config cycles	*/
+#define CONFIG_SYS_FLASH_ADDR1		0x2AAA	/* 2nd address for flash config cycles	*/
 /*
  * The following defines are added for buggy IOP480 byte interface.
  * All other boards should use the standard values (CPCI405 etc.)
  */
-#define CFG_FLASH_READ0		0x0000	/* 0 is standard			*/
-#define CFG_FLASH_READ1		0x0001	/* 1 is standard			*/
-#define CFG_FLASH_READ2		0x0002	/* 2 is standard			*/
+#define CONFIG_SYS_FLASH_READ0		0x0000	/* 0 is standard			*/
+#define CONFIG_SYS_FLASH_READ1		0x0001	/* 1 is standard			*/
+#define CONFIG_SYS_FLASH_READ2		0x0002	/* 2 is standard			*/
 
-#define CFG_FLASH_EMPTY_INFO		/* print 'E' for empty sector on flinfo */
+#define CONFIG_SYS_FLASH_EMPTY_INFO		/* print 'E' for empty sector on flinfo */
 
 /*-----------------------------------------------------------------------
  * Cache Configuration
  */
-#define CFG_CACHELINE_SIZE	16
+#define CONFIG_SYS_CACHELINE_SIZE	16
 
 /*-----------------------------------------------------------------------
  * Memory bank definitions
  */
 
 /* CS0 - AMD Flash, address 0xffc00000 */
-#define	CFG_CSAR0               0xffc0
-#define	CFG_CSCR0               0x1980          /* WS=0110, AA=1, PS=10         */
+#define	CONFIG_SYS_CS0_BASE		0xffc00000
+#define	CONFIG_SYS_CS0_CTRL		0x00001980	/* WS=0110, AA=1, PS=10         */
 /** Note: There is a CSMR0/DRAM vector problem, need to disable C/I ***/
-#define	CFG_CSMR0               0x003f0021      /* 4MB, AA=0, WP=0, C/I=1, V=1  */
+#define	CONFIG_SYS_CS0_MASK		0x003f0021	/* 4MB, AA=0, WP=0, C/I=1, V=1  */
 
 /* CS1 - FPGA, address 0xe0000000 */
-#define	CFG_CSAR1               0xe000
-#define	CFG_CSCR1               0x0d80          /* WS=0011, AA=1, PS=10         */
-#define	CFG_CSMR1               0x00010001      /* 128kB, AA=0, WP=0, C/I=0, V=1*/
+#define	CONFIG_SYS_CS1_BASE		0xe0000000
+#define	CONFIG_SYS_CS1_CTRL		0x00000d80	/* WS=0011, AA=1, PS=10         */
+#define	CONFIG_SYS_CS1_MASK		0x00010001	/* 128kB, AA=0, WP=0, C/I=0, V=1*/
 
 /*-----------------------------------------------------------------------
  * Port configuration
  */
-#define	CFG_GPIO_FUNC           0x00000008      /* Set gpio pins: none          */
-#define	CFG_GPIO1_FUNC          0x00df00f0      /* 36-39(SWITCH),48-52(FPGAs),54*/
-#define	CFG_GPIO_EN             0x00000008      /* Set gpio output enable       */
-#define	CFG_GPIO1_EN            0x00c70000      /* Set gpio output enable       */
-#define	CFG_GPIO_OUT            0x00000008      /* Set outputs to default state */
-#define	CFG_GPIO1_OUT           0x00c70000      /* Set outputs to default state */
+#define	CONFIG_SYS_GPIO_FUNC           0x00000008      /* Set gpio pins: none          */
+#define	CONFIG_SYS_GPIO1_FUNC          0x00df00f0      /* 36-39(SWITCH),48-52(FPGAs),54*/
+#define	CONFIG_SYS_GPIO_EN             0x00000008      /* Set gpio output enable       */
+#define	CONFIG_SYS_GPIO1_EN            0x00c70000      /* Set gpio output enable       */
+#define	CONFIG_SYS_GPIO_OUT            0x00000008      /* Set outputs to default state */
+#define	CONFIG_SYS_GPIO1_OUT           0x00c70000      /* Set outputs to default state */
 
-#define CFG_GPIO1_LED           0x00400000      /* user led                     */
+#define CONFIG_SYS_GPIO1_LED           0x00400000      /* user led                     */
 
 /*-----------------------------------------------------------------------
  * FPGA stuff
  */
-#define CFG_FPGA_SPARTAN2	1	    /* using Xilinx Spartan 2 now    */
-#define CFG_FPGA_MAX_SIZE	512*1024    /* 512kByte is enough for XC2S200*/
+#define CONFIG_SYS_FPGA_SPARTAN2	1	    /* using Xilinx Spartan 2 now    */
+#define CONFIG_SYS_FPGA_MAX_SIZE	512*1024    /* 512kByte is enough for XC2S200*/
 
 /* FPGA program pin configuration */
-#define CFG_FPGA_PRG		0x00010000  /* FPGA program pin (ppc output) */
-#define CFG_FPGA_CLK		0x00040000  /* FPGA clk pin (ppc output)     */
-#define CFG_FPGA_DATA		0x00020000  /* FPGA data pin (ppc output)    */
-#define CFG_FPGA_INIT		0x00080000  /* FPGA init pin (ppc input)     */
-#define CFG_FPGA_DONE		0x00100000  /* FPGA done pin (ppc input)     */
+#define CONFIG_SYS_FPGA_PRG		0x00010000  /* FPGA program pin (ppc output) */
+#define CONFIG_SYS_FPGA_CLK		0x00040000  /* FPGA clk pin (ppc output)     */
+#define CONFIG_SYS_FPGA_DATA		0x00020000  /* FPGA data pin (ppc output)    */
+#define CONFIG_SYS_FPGA_INIT		0x00080000  /* FPGA init pin (ppc input)     */
+#define CONFIG_SYS_FPGA_DONE		0x00100000  /* FPGA done pin (ppc input)     */
 
 #endif	/* _TASREG_H */
diff --git a/include/configs/TB5200.h b/include/configs/TB5200.h
index 3b6816675..60102469c 100644
--- a/include/configs/TB5200.h
+++ b/include/configs/TB5200.h
@@ -37,7 +37,7 @@
 #define CONFIG_TQM5200		1	/* ... on TQM5200 module */
 #define CONFIG_TB5200		1	/* ... on a TB5200 base board */
 
-#define CFG_MPC5XXX_CLKIN	33000000 /* ... running at 33.000000MHz */
+#define CONFIG_SYS_MPC5XXX_CLKIN	33000000 /* ... running at 33.000000MHz */
 
 #define BOOTFLAG_COLD		0x01	/* Normal Power-On: Boot from FLASH  */
 #define BOOTFLAG_WARM		0x02	/* Software reboot	     */
@@ -51,7 +51,7 @@
 #define CONFIG_SERIAL_MULTI	1	/* support multiple consoles */
 #define CONFIG_PSC_CONSOLE2	6	/* second console is on PSC6 */
 #define CONFIG_BAUDRATE		115200	/* ... at 115200 bps */
-#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
 
 /*
  * Video console
@@ -66,7 +66,7 @@
 #define CONFIG_CONSOLE_EXTRA_INFO
 #define CONFIG_VIDEO_SW_CURSOR
 #define CONFIG_SPLASH_SCREEN
-#define CFG_CONSOLE_IS_IN_ENV
+#define CONFIG_SYS_CONSOLE_IS_IN_ENV
 #endif
 
 /* Partitions */
@@ -79,9 +79,9 @@
 #define CONFIG_USB_STORAGE
 
 /* POST support */
-#define CONFIG_POST		(CFG_POST_MEMORY   | \
-				 CFG_POST_CPU	   | \
-				 CFG_POST_I2C)
+#define CONFIG_POST		(CONFIG_SYS_POST_MEMORY   | \
+				 CONFIG_SYS_POST_CPU	   | \
+				 CONFIG_SYS_POST_I2C)
 
 #ifdef CONFIG_POST
 /* preserve space for the post_word at end of on-chip SRAM */
@@ -133,7 +133,7 @@
 #define	CONFIG_TIMESTAMP		/* display image timestamps */
 
 #if (TEXT_BASE == 0xFC000000)		/* Boot low */
-#   define CFG_LOWBOOT		1
+#   define CONFIG_SYS_LOWBOOT		1
 #endif
 
 /*
@@ -200,24 +200,24 @@
 /*
  * IPB Bus clocking configuration.
  */
-#define CFG_IPBCLK_EQUALS_XLBCLK		/* define for 133MHz speed */
+#define CONFIG_SYS_IPBCLK_EQUALS_XLBCLK		/* define for 133MHz speed */
 
-#if defined(CFG_IPBCLK_EQUALS_XLBCLK)
+#if defined(CONFIG_SYS_IPBCLK_EQUALS_XLBCLK)
 /*
  * PCI Bus clocking configuration
  *
  * Actually a PCI Clock of 66 MHz is only set (in cpu_init.c) if
- * CFG_IPBCLK_EQUALS_XLBCLK is defined. This is because a PCI Clock
+ * CONFIG_SYS_IPBCLK_EQUALS_XLBCLK is defined. This is because a PCI Clock
  * of 66 MHz yet hasn't been tested with a IPB Bus Clock of 66 MHz.
  */
-#define CFG_PCICLK_EQUALS_IPBCLK_DIV2		/* define for 66MHz speed */
+#define CONFIG_SYS_PCICLK_EQUALS_IPBCLK_DIV2		/* define for 66MHz speed */
 #endif
 
 /*
  * I2C configuration
  */
 #define CONFIG_HARD_I2C		1	/* I2C with hardware support */
-#define CFG_I2C_MODULE		2	/* Select I2C module #2 */
+#define CONFIG_SYS_I2C_MODULE		2	/* Select I2C module #2 */
 
 /*
  * I2C clock frequency
@@ -225,11 +225,11 @@
  * Please notice, that the resulting clock frequency could differ from the
  * configured value. This is because the I2C clock is derived from system
  * clock over a frequency divider with only a few divider values. U-boot
- * calculates the best approximation for CFG_I2C_SPEED. However the calculated
+ * calculates the best approximation for CONFIG_SYS_I2C_SPEED. However the calculated
  * approximation allways lies below the configured value, never above.
  */
-#define CFG_I2C_SPEED		100000 /* 100 kHz */
-#define CFG_I2C_SLAVE		0x7F
+#define CONFIG_SYS_I2C_SPEED		100000 /* 100 kHz */
+#define CONFIG_SYS_I2C_SLAVE		0x7F
 
 /*
  * EEPROM configuration for onboard EEPROM M24C32 (M24C64 should work
@@ -237,41 +237,41 @@
  * EEPROM (24C64) is on the same I2C address (but on other I2C bus), so the
  * same configuration could be used.
  */
-#define CFG_I2C_EEPROM_ADDR		0x50	/* 1010000x */
-#define CFG_I2C_EEPROM_ADDR_LEN		2
-#define CFG_EEPROM_PAGE_WRITE_BITS	5	/* =32 Bytes per write */
-#define CFG_EEPROM_PAGE_WRITE_DELAY_MS	20
+#define CONFIG_SYS_I2C_EEPROM_ADDR		0x50	/* 1010000x */
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN		2
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS	5	/* =32 Bytes per write */
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	20
 
 /* List of I2C addresses to be verified by POST */
 #undef I2C_ADDR_LIST
-#define I2C_ADDR_LIST	{	CFG_I2C_EEPROM_ADDR,	\
-				CFG_I2C_RTC_ADDR,	\
-				CFG_I2C_SLAVE }
+#define I2C_ADDR_LIST	{	CONFIG_SYS_I2C_EEPROM_ADDR,	\
+				CONFIG_SYS_I2C_RTC_ADDR,	\
+				CONFIG_SYS_I2C_SLAVE }
 
 /*
  * Flash configuration
  */
-#define CFG_FLASH_BASE		TEXT_BASE /* 0xFC000000 */
+#define CONFIG_SYS_FLASH_BASE		TEXT_BASE /* 0xFC000000 */
 
 /* use CFI flash driver */
-#define CFG_FLASH_CFI		1	/* Flash is CFI conformant */
+#define CONFIG_SYS_FLASH_CFI		1	/* Flash is CFI conformant */
 #define CONFIG_FLASH_CFI_DRIVER	1	/* Use the common driver */
-#define CFG_FLASH_BANKS_LIST	{ CFG_BOOTCS_START }
-#define CFG_FLASH_EMPTY_INFO
-#define CFG_FLASH_SIZE		0x04000000 /* 64 MByte */
-#define CFG_MAX_FLASH_SECT	512	/* max num of sects on one chip */
-#define CFG_FLASH_USE_BUFFER_WRITE	1
-
-#if !defined(CFG_LOWBOOT)
-#define CFG_ENV_ADDR		(CFG_FLASH_BASE + 0x00760000 + 0x00800000)
-#else	/* CFG_LOWBOOT */
+#define CONFIG_SYS_FLASH_BANKS_LIST	{ CONFIG_SYS_BOOTCS_START }
+#define CONFIG_SYS_FLASH_EMPTY_INFO
+#define CONFIG_SYS_FLASH_SIZE		0x04000000 /* 64 MByte */
+#define CONFIG_SYS_MAX_FLASH_SECT	512	/* max num of sects on one chip */
+#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE	1
+
+#if !defined(CONFIG_SYS_LOWBOOT)
+#define CONFIG_ENV_ADDR		(CONFIG_SYS_FLASH_BASE + 0x00760000 + 0x00800000)
+#else	/* CONFIG_SYS_LOWBOOT */
 #if defined(CONFIG_TQM5200_B)
-#define CFG_ENV_ADDR		(CFG_FLASH_BASE + 0x00080000)
+#define CONFIG_ENV_ADDR		(CONFIG_SYS_FLASH_BASE + 0x00080000)
 #else
-#define CFG_ENV_ADDR		(CFG_FLASH_BASE + 0x00060000)
+#define CONFIG_ENV_ADDR		(CONFIG_SYS_FLASH_BASE + 0x00060000)
 #endif /* CONFIG_TQM5200_B */
-#endif	/* CFG_LOWBOOT */
-#define CFG_MAX_FLASH_BANKS	1	/* max num of flash banks
+#endif	/* CONFIG_SYS_LOWBOOT */
+#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max num of flash banks
 					   (= chip selects) */
 
 /* Dynamic MTD partition support */
@@ -296,49 +296,49 @@
 /*
  * Environment settings
  */
-#define CFG_ENV_IS_IN_FLASH	1
-#define CFG_ENV_SIZE		0x10000
+#define CONFIG_ENV_IS_IN_FLASH	1
+#define CONFIG_ENV_SIZE		0x10000
 #if defined(CONFIG_TQM5200_B)
-#define CFG_ENV_SECT_SIZE	0x40000
+#define CONFIG_ENV_SECT_SIZE	0x40000
 #else
-#define CFG_ENV_SECT_SIZE	0x20000
-#define CFG_ENV_ADDR_REDUND	(CFG_ENV_ADDR + CFG_ENV_SECT_SIZE)
-#define CFG_ENV_SIZE_REDUND	(CFG_ENV_SIZE)
+#define CONFIG_ENV_SECT_SIZE	0x20000
+#define CONFIG_ENV_ADDR_REDUND	(CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE)
+#define CONFIG_ENV_SIZE_REDUND	(CONFIG_ENV_SIZE)
 #endif /* CONFIG_TQM5200_B */
 
 /*
  * Memory map
  */
-#define CFG_MBAR		0xF0000000
-#define CFG_SDRAM_BASE		0x00000000
-#define CFG_DEFAULT_MBAR	0x80000000
+#define CONFIG_SYS_MBAR		0xF0000000
+#define CONFIG_SYS_SDRAM_BASE		0x00000000
+#define CONFIG_SYS_DEFAULT_MBAR	0x80000000
 
 /* Use ON-Chip SRAM until RAM will be available */
-#define CFG_INIT_RAM_ADDR	MPC5XXX_SRAM
+#define CONFIG_SYS_INIT_RAM_ADDR	MPC5XXX_SRAM
 #ifdef CONFIG_POST
 /* preserve space for the post_word at end of on-chip SRAM */
-#define CFG_INIT_RAM_END	MPC5XXX_SRAM_POST_SIZE
+#define CONFIG_SYS_INIT_RAM_END	MPC5XXX_SRAM_POST_SIZE
 #else
-#define CFG_INIT_RAM_END	MPC5XXX_SRAM_SIZE
+#define CONFIG_SYS_INIT_RAM_END	MPC5XXX_SRAM_SIZE
 #endif
 
 
-#define CFG_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
-#define CFG_MONITOR_BASE	TEXT_BASE
-#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
-#   define CFG_RAMBOOT		1
+#define CONFIG_SYS_MONITOR_BASE	TEXT_BASE
+#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
+#   define CONFIG_SYS_RAMBOOT		1
 #endif
 
 #if defined(CONFIG_TQM5200_B)
-#define CFG_MONITOR_LEN		(512 << 10)	/* Reserve 512 kB for Monitor	*/
+#define CONFIG_SYS_MONITOR_LEN		(512 << 10)	/* Reserve 512 kB for Monitor	*/
 #else
-#define CFG_MONITOR_LEN		(384 << 10)	/* Reserve 384 kB for Monitor	*/
+#define CONFIG_SYS_MONITOR_LEN		(384 << 10)	/* Reserve 384 kB for Monitor	*/
 #endif /* CONFIG_TQM5200_B */
-#define CFG_MALLOC_LEN		(1024 << 10)	/* Reserve 1024 kB for malloc()	*/
-#define CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
+#define CONFIG_SYS_MALLOC_LEN		(1024 << 10)	/* Reserve 1024 kB for malloc()	*/
+#define CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
 
 /*
  * Ethernet configuration
@@ -379,45 +379,45 @@
  *   GPIO on PSC6_3 is used in post_hotkeys_pressed() to enable extended POST
  *   tests.
  */
-#define CFG_GPS_PORT_CONFIG	0x81500114
+#define CONFIG_SYS_GPS_PORT_CONFIG	0x81500114
 
 /*
  * RTC configuration
  */
 #define CONFIG_RTC_M41T11	1
-#define CFG_I2C_RTC_ADDR	0x68
-#define CFG_M41T11_BASE_YEAR	1900    /* because Linux uses the same base
+#define CONFIG_SYS_I2C_RTC_ADDR	0x68
+#define CONFIG_SYS_M41T11_BASE_YEAR	1900    /* because Linux uses the same base
 					   year */
 
 /*
  * Miscellaneous configurable options
  */
-#define CFG_LONGHELP			/* undef to save memory	    */
-#define CFG_PROMPT		"=> "	/* Monitor Command Prompt   */
+#define CONFIG_SYS_LONGHELP			/* undef to save memory	    */
+#define CONFIG_SYS_PROMPT		"=> "	/* Monitor Command Prompt   */
 #define CONFIG_CMDLINE_EDITING	1	/* add command line history */
 #if defined(CONFIG_CMD_KGDB)
-#define CFG_CBSIZE		1024	/* Console I/O Buffer Size  */
+#define CONFIG_SYS_CBSIZE		1024	/* Console I/O Buffer Size  */
 #else
-#define CFG_CBSIZE		256	/* Console I/O Buffer Size  */
+#define CONFIG_SYS_CBSIZE		256	/* Console I/O Buffer Size  */
 #endif
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define CFG_MAXARGS		16	/* max number of command args	*/
-#define CFG_BARGSIZE		CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS		16	/* max number of command args	*/
+#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
 
-#define CFG_CACHELINE_SIZE	32	/* For MPC5xxx CPUs */
+#define CONFIG_SYS_CACHELINE_SIZE	32	/* For MPC5xxx CPUs */
 #if defined(CONFIG_CMD_KGDB)
-#  define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value */
+#  define CONFIG_SYS_CACHELINE_SHIFT	5	/* log base 2 of the above value */
 #endif
 
 /* Enable an alternate, more extensive memory test */
-#define CFG_ALT_MEMTEST
+#define CONFIG_SYS_ALT_MEMTEST
 
-#define CFG_MEMTEST_START	0x00100000	/* memtest works on */
-#define CFG_MEMTEST_END		0x00f00000	/* 1 ... 15 MB in DRAM	*/
+#define CONFIG_SYS_MEMTEST_START	0x00100000	/* memtest works on */
+#define CONFIG_SYS_MEMTEST_END		0x00f00000	/* 1 ... 15 MB in DRAM	*/
 
-#define CFG_LOAD_ADDR		0x100000	/* default load address */
+#define CONFIG_SYS_LOAD_ADDR		0x100000	/* default load address */
 
-#define CFG_HZ			1000	/* decrementer freq: 1 ms ticks */
+#define CONFIG_SYS_HZ			1000	/* decrementer freq: 1 ms ticks */
 
 /*
  * Enable loopw command.
@@ -428,22 +428,22 @@
  * Various low-level settings
  */
 #if defined(CONFIG_MPC5200)
-#define CFG_HID0_INIT		HID0_ICE | HID0_ICFI
-#define CFG_HID0_FINAL		HID0_ICE
+#define CONFIG_SYS_HID0_INIT		HID0_ICE | HID0_ICFI
+#define CONFIG_SYS_HID0_FINAL		HID0_ICE
 #else
-#define CFG_HID0_INIT		0
-#define CFG_HID0_FINAL		0
+#define CONFIG_SYS_HID0_INIT		0
+#define CONFIG_SYS_HID0_FINAL		0
 #endif
 
-#define CFG_BOOTCS_START	CFG_FLASH_BASE
-#define CFG_BOOTCS_SIZE		CFG_FLASH_SIZE
-#ifdef CFG_PCICLK_EQUALS_IPBCLK_DIV2
-#define CFG_BOOTCS_CFG		0x0008DF30 /* for pci_clk  = 66 MHz */
+#define CONFIG_SYS_BOOTCS_START	CONFIG_SYS_FLASH_BASE
+#define CONFIG_SYS_BOOTCS_SIZE		CONFIG_SYS_FLASH_SIZE
+#ifdef CONFIG_SYS_PCICLK_EQUALS_IPBCLK_DIV2
+#define CONFIG_SYS_BOOTCS_CFG		0x0008DF30 /* for pci_clk  = 66 MHz */
 #else
-#define CFG_BOOTCS_CFG		0x0004DF30 /* for pci_clk = 33 MHz */
+#define CONFIG_SYS_BOOTCS_CFG		0x0004DF30 /* for pci_clk = 33 MHz */
 #endif
-#define CFG_CS0_START		CFG_FLASH_BASE
-#define CFG_CS0_SIZE		CFG_FLASH_SIZE
+#define CONFIG_SYS_CS0_START		CONFIG_SYS_FLASH_BASE
+#define CONFIG_SYS_CS0_SIZE		CONFIG_SYS_FLASH_SIZE
 
 #define CONFIG_LAST_STAGE_INIT
 
@@ -451,24 +451,24 @@
  * SRAM - Do not map below 2 GB in address space, because this area is used
  * for SDRAM autosizing.
  */
-#define CFG_CS2_START		0xE5000000
-#define CFG_CS2_SIZE		0x100000	/* 1 MByte */
-#define CFG_CS2_CFG		0x0004D930
+#define CONFIG_SYS_CS2_START		0xE5000000
+#define CONFIG_SYS_CS2_SIZE		0x100000	/* 1 MByte */
+#define CONFIG_SYS_CS2_CFG		0x0004D930
 
 /*
  * Grafic controller - Do not map below 2 GB in address space, because this
  * area is used for SDRAM autosizing.
  */
 #define SM501_FB_BASE		0xE0000000
-#define CFG_CS1_START		(SM501_FB_BASE)
-#define CFG_CS1_SIZE		0x4000000	/* 64 MByte */
-#define CFG_CS1_CFG		0x8F48FF70
-#define SM501_MMIO_BASE		CFG_CS1_START + 0x03E00000
+#define CONFIG_SYS_CS1_START		(SM501_FB_BASE)
+#define CONFIG_SYS_CS1_SIZE		0x4000000	/* 64 MByte */
+#define CONFIG_SYS_CS1_CFG		0x8F48FF70
+#define SM501_MMIO_BASE		CONFIG_SYS_CS1_START + 0x03E00000
 
-#define CFG_CS_BURST		0x00000000
-#define CFG_CS_DEADCYCLE	0x33333311	/* 1 dead cycle for flash and SM501 */
+#define CONFIG_SYS_CS_BURST		0x00000000
+#define CONFIG_SYS_CS_DEADCYCLE	0x33333311	/* 1 dead cycle for flash and SM501 */
 
-#define CFG_RESET_ADDRESS	0xff000000
+#define CONFIG_SYS_RESET_ADDRESS	0xff000000
 
 /*-----------------------------------------------------------------------
  * USB stuff
@@ -490,23 +490,23 @@
 #define CONFIG_IDE_RESET		/* reset for ide supported	*/
 #define CONFIG_IDE_PREINIT
 
-#define CFG_IDE_MAXBUS		1	/* max. 1 IDE bus		*/
-#define CFG_IDE_MAXDEVICE	2	/* max. 2 drives per IDE bus	*/
+#define CONFIG_SYS_IDE_MAXBUS		1	/* max. 1 IDE bus		*/
+#define CONFIG_SYS_IDE_MAXDEVICE	2	/* max. 2 drives per IDE bus	*/
 
-#define CFG_ATA_IDE0_OFFSET	0x0000
+#define CONFIG_SYS_ATA_IDE0_OFFSET	0x0000
 
-#define CFG_ATA_BASE_ADDR	MPC5XXX_ATA
+#define CONFIG_SYS_ATA_BASE_ADDR	MPC5XXX_ATA
 
 /* Offset for data I/O			*/
-#define CFG_ATA_DATA_OFFSET	(0x0060)
+#define CONFIG_SYS_ATA_DATA_OFFSET	(0x0060)
 
 /* Offset for normal register accesses	*/
-#define CFG_ATA_REG_OFFSET	(CFG_ATA_DATA_OFFSET)
+#define CONFIG_SYS_ATA_REG_OFFSET	(CONFIG_SYS_ATA_DATA_OFFSET)
 
 /* Offset for alternate registers	*/
-#define CFG_ATA_ALT_OFFSET	(0x005C)
+#define CONFIG_SYS_ATA_ALT_OFFSET	(0x005C)
 
 /* Interval between registers						     */
-#define CFG_ATA_STRIDE		4
+#define CONFIG_SYS_ATA_STRIDE		4
 
 #endif /* __CONFIG_H */
diff --git a/include/configs/TK885D.h b/include/configs/TK885D.h
index 8073b7ec6..14ff62c52 100644
--- a/include/configs/TK885D.h
+++ b/include/configs/TK885D.h
@@ -41,8 +41,8 @@
 #define CONFIG_TK885D		1	/* ...in a TK885D base board	*/
 
 #define CONFIG_8xx_OSCLK		10000000	/*  10 MHz - PLL input clock	*/
-#define CFG_8xx_CPUCLK_MIN		15000000	/*  15 MHz - CPU minimum clock	*/
-#define CFG_8xx_CPUCLK_MAX		133000000	/* 133 MHz - CPU maximum clock	*/
+#define CONFIG_SYS_8xx_CPUCLK_MIN		15000000	/*  15 MHz - CPU minimum clock	*/
+#define CONFIG_SYS_8xx_CPUCLK_MAX		133000000	/* 133 MHz - CPU maximum clock	*/
 #define CONFIG_8xx_CPUCLK_DEFAULT	66000000	/*  66 MHz - CPU default clock	*/
 						/* (it will be used if there is no	*/
 						/* 'cpuclk' variable with valid value)	*/
@@ -92,7 +92,7 @@
 #define CONFIG_BOOTCOMMAND	"run flash_self"
 
 #define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
-#undef	CFG_LOADS_BAUD_CHANGE		/* don't allow baudrate change	*/
+#undef	CONFIG_SYS_LOADS_BAUD_CHANGE		/* don't allow baudrate change	*/
 
 #undef	CONFIG_WATCHDOG			/* watchdog disabled		*/
 
@@ -104,8 +104,8 @@
 #undef	CONFIG_HARD_I2C			/* I2C with hardware support	*/
 #define CONFIG_SOFT_I2C		1	/* I2C bit-banged		*/
 
-#define CFG_I2C_SPEED		93000	/* 93 kHz is supposed to work	*/
-#define CFG_I2C_SLAVE		0xFE
+#define CONFIG_SYS_I2C_SPEED		93000	/* 93 kHz is supposed to work	*/
+#define CONFIG_SYS_I2C_SLAVE		0xFE
 
 #ifdef CONFIG_SOFT_I2C
 /*
@@ -125,13 +125,13 @@
 #define I2C_DELAY	udelay(2)	/* 1/4 I2C clock duration */
 #endif	/* CONFIG_SOFT_I2C */
 
-#define CFG_I2C_EEPROM_ADDR	0x50		/* EEPROM AT24C??	*/
-#define CFG_I2C_EEPROM_ADDR_LEN 2		/* two byte address	*/
-#define CFG_EEPROM_PAGE_WRITE_BITS	4
-#define CFG_EEPROM_PAGE_WRITE_DELAY_MS	10	/* and takes up to 10 msec */
+#define CONFIG_SYS_I2C_EEPROM_ADDR	0x50		/* EEPROM AT24C??	*/
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2		/* two byte address	*/
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS	4
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	10	/* and takes up to 10 msec */
 
 # define CONFIG_RTC_DS1337 1
-# define CFG_I2C_RTC_ADDR 0x68
+# define CONFIG_SYS_I2C_RTC_ADDR 0x68
 
 /*
  * BOOTP options
@@ -170,34 +170,34 @@
 /*
  * Miscellaneous configurable options
  */
-#define CFG_LONGHELP			/* undef to save memory		*/
-#define CFG_PROMPT		"=> "	/* Monitor Command Prompt	*/
+#define CONFIG_SYS_LONGHELP			/* undef to save memory		*/
+#define CONFIG_SYS_PROMPT		"=> "	/* Monitor Command Prompt	*/
 
 #define CONFIG_CMDLINE_EDITING	1	/* add command line history	*/
-#define CFG_HUSH_PARSER		1	/* Use the HUSH parser		*/
-#ifdef	CFG_HUSH_PARSER
-#define	CFG_PROMPT_HUSH_PS2	"> "
+#define CONFIG_SYS_HUSH_PARSER		1	/* Use the HUSH parser		*/
+#ifdef	CONFIG_SYS_HUSH_PARSER
+#define	CONFIG_SYS_PROMPT_HUSH_PS2	"> "
 #endif
 
 #if defined(CONFIG_CMD_KGDB)
-#define CFG_CBSIZE		1024	/* Console I/O Buffer Size	*/
+#define CONFIG_SYS_CBSIZE		1024	/* Console I/O Buffer Size	*/
 #else
-#define CFG_CBSIZE		256	/* Console I/O Buffer Size	*/
+#define CONFIG_SYS_CBSIZE		256	/* Console I/O Buffer Size	*/
 #endif
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define CFG_MAXARGS		16	/* max number of command args	*/
-#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS		16	/* max number of command args	*/
+#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
 
-#define CFG_MEMTEST_START	0x0100000	/* memtest works on	*/
-#define CFG_MEMTEST_END		0x0300000	/* 1 ... 3 MB in DRAM	*/
-#define CFG_ALT_MEMTEST				/* alternate, more extensive
+#define CONFIG_SYS_MEMTEST_START	0x0100000	/* memtest works on	*/
+#define CONFIG_SYS_MEMTEST_END		0x0300000	/* 1 ... 3 MB in DRAM	*/
+#define CONFIG_SYS_ALT_MEMTEST				/* alternate, more extensive
 						   memory test.*/
 
-#define CFG_LOAD_ADDR		0x100000	/* default load address */
+#define CONFIG_SYS_LOAD_ADDR		0x100000	/* default load address */
 
-#define CFG_HZ			1000	/* decrementer freq: 1 ms ticks */
+#define CONFIG_SYS_HZ			1000	/* decrementer freq: 1 ms ticks */
 
-#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
 
 /*
  * Enable loopw command.
@@ -212,70 +212,70 @@
 /*-----------------------------------------------------------------------
  * Internal Memory Mapped Register
  */
-#define CFG_IMMR		0xFFF00000
+#define CONFIG_SYS_IMMR		0xFFF00000
 
 /*-----------------------------------------------------------------------
  * Definitions for initial stack pointer and data area (in DPRAM)
  */
-#define CFG_INIT_RAM_ADDR	CFG_IMMR
-#define CFG_INIT_RAM_END	0x2F00	/* End of used area in DPRAM	*/
-#define CFG_GBL_DATA_SIZE	64  /* size in bytes reserved for initial data */
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_IMMR
+#define CONFIG_SYS_INIT_RAM_END	0x2F00	/* End of used area in DPRAM	*/
+#define CONFIG_SYS_GBL_DATA_SIZE	64  /* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
 /*-----------------------------------------------------------------------
  * Start addresses for the final memory configuration
  * (Set up by the startup code)
- * Please note that CFG_SDRAM_BASE _must_ start at 0
+ * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
  */
-#define CFG_SDRAM_BASE		0x00000000
-#define CFG_FLASH_BASE		0x40000000
-#define CFG_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor	*/
-#define CFG_MONITOR_BASE	CFG_FLASH_BASE
-#define CFG_MALLOC_LEN		(256 << 10)	/* Reserve 128 kB for malloc()	*/
+#define CONFIG_SYS_SDRAM_BASE		0x00000000
+#define CONFIG_SYS_FLASH_BASE		0x40000000
+#define CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor	*/
+#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_FLASH_BASE
+#define CONFIG_SYS_MALLOC_LEN		(256 << 10)	/* Reserve 128 kB for malloc()	*/
 
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
+#define CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
 
 /*-----------------------------------------------------------------------
  * FLASH organization
  */
 
 /* use CFI flash driver */
-#define CFG_FLASH_CFI		1	/* Flash is CFI conformant */
+#define CONFIG_SYS_FLASH_CFI		1	/* Flash is CFI conformant */
 #define CONFIG_FLASH_CFI_DRIVER	1	/* Use the common driver */
-#define CFG_FLASH_BANKS_LIST	{ CFG_FLASH_BASE }
-#define CFG_FLASH_EMPTY_INFO
-#define CFG_FLASH_USE_BUFFER_WRITE	1
-#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks */
-#define CFG_MAX_FLASH_SECT	256	/* max number of sectors on one chip */
+#define CONFIG_SYS_FLASH_BANKS_LIST	{ CONFIG_SYS_FLASH_BASE }
+#define CONFIG_SYS_FLASH_EMPTY_INFO
+#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE	1
+#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks */
+#define CONFIG_SYS_MAX_FLASH_SECT	256	/* max number of sectors on one chip */
 
-#define CFG_ENV_IS_IN_FLASH	1
-#define CFG_ENV_OFFSET		0x40000 /*   Offset   of Environment Sector	*/
-#define CFG_ENV_SIZE		0x08000 /* Total Size of Environment		*/
-#define CFG_ENV_SECT_SIZE	0x40000 /* Total Size of Environment Sector	*/
+#define CONFIG_ENV_IS_IN_FLASH	1
+#define CONFIG_ENV_OFFSET		0x40000 /*   Offset   of Environment Sector	*/
+#define CONFIG_ENV_SIZE		0x08000 /* Total Size of Environment		*/
+#define CONFIG_ENV_SECT_SIZE	0x40000 /* Total Size of Environment Sector	*/
 
 /* Address and size of Redundant Environment Sector	*/
-#define CFG_ENV_OFFSET_REDUND	(CFG_ENV_OFFSET+CFG_ENV_SECT_SIZE)
-#define CFG_ENV_SIZE_REDUND	(CFG_ENV_SIZE)
+#define CONFIG_ENV_OFFSET_REDUND	(CONFIG_ENV_OFFSET+CONFIG_ENV_SECT_SIZE)
+#define CONFIG_ENV_SIZE_REDUND	(CONFIG_ENV_SIZE)
 
 /*-----------------------------------------------------------------------
  * Hardware Information Block
  */
-#define CFG_HWINFO_OFFSET	0x0003FFC0	/* offset of HW Info block */
-#define CFG_HWINFO_SIZE		0x00000040	/* size	  of HW Info block */
-#define CFG_HWINFO_MAGIC	0x54514D38	/* 'TQM8' */
+#define CONFIG_SYS_HWINFO_OFFSET	0x0003FFC0	/* offset of HW Info block */
+#define CONFIG_SYS_HWINFO_SIZE		0x00000040	/* size	  of HW Info block */
+#define CONFIG_SYS_HWINFO_MAGIC	0x54514D38	/* 'TQM8' */
 
 /*-----------------------------------------------------------------------
  * Cache Configuration
  */
-#define CFG_CACHELINE_SIZE	16	/* For all MPC8xx CPUs			*/
+#define CONFIG_SYS_CACHELINE_SIZE	16	/* For all MPC8xx CPUs			*/
 #if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT	4	/* log base 2 of the above value	*/
+#define CONFIG_SYS_CACHELINE_SHIFT	4	/* log base 2 of the above value	*/
 #endif
 
 /*-----------------------------------------------------------------------
@@ -285,10 +285,10 @@
  * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze
  */
 #if defined(CONFIG_WATCHDOG)
-#define CFG_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
+#define CONFIG_SYS_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
 			 SYPCR_SWE  | SYPCR_SWRI| SYPCR_SWP)
 #else
-#define CFG_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
+#define CONFIG_SYS_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
 #endif
 
 /*-----------------------------------------------------------------------
@@ -297,9 +297,9 @@
  * PCMCIA config., multi-function pin tri-state
  */
 #ifndef CONFIG_CAN_DRIVER
-#define CFG_SIUMCR	(SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_MLRC01)
+#define CONFIG_SYS_SIUMCR	(SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_MLRC01)
 #else	/* we must activate GPL5 in the SIUMCR for CAN */
-#define CFG_SIUMCR	(SIUMCR_DBGC11 | SIUMCR_DBPC00 | SIUMCR_MLRC01)
+#define CONFIG_SYS_SIUMCR	(SIUMCR_DBGC11 | SIUMCR_DBPC00 | SIUMCR_MLRC01)
 #endif	/* CONFIG_CAN_DRIVER */
 
 /*-----------------------------------------------------------------------
@@ -307,14 +307,14 @@
  *-----------------------------------------------------------------------
  * Clear Reference Interrupt Status, Timebase freezing enabled
  */
-#define CFG_TBSCR	(TBSCR_REFA | TBSCR_REFB | TBSCR_TBF)
+#define CONFIG_SYS_TBSCR	(TBSCR_REFA | TBSCR_REFB | TBSCR_TBF)
 
 /*-----------------------------------------------------------------------
  * PISCR - Periodic Interrupt Status and Control		11-31
  *-----------------------------------------------------------------------
  * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
  */
-#define CFG_PISCR	(PISCR_PS | PISCR_PITF)
+#define CONFIG_SYS_PISCR	(PISCR_PS | PISCR_PITF)
 
 /*-----------------------------------------------------------------------
  * SCCR - System Clock and reset Control Register		15-27
@@ -323,7 +323,7 @@
  * power management and some other internal clocks
  */
 #define SCCR_MASK	SCCR_EBDF11
-#define CFG_SCCR	(SCCR_COM00   | SCCR_DFSYNC00 | SCCR_DFBRG00  | \
+#define CONFIG_SYS_SCCR	(SCCR_COM00   | SCCR_DFSYNC00 | SCCR_DFBRG00  | \
 			 SCCR_DFNL000 | SCCR_DFNH000  | SCCR_DFLCD000 | \
 			 SCCR_DFALCD00)
 
@@ -332,14 +332,14 @@
  *-----------------------------------------------------------------------
  *
  */
-#define CFG_PCMCIA_MEM_ADDR	(0xE0000000)
-#define CFG_PCMCIA_MEM_SIZE	( 64 << 20 )
-#define CFG_PCMCIA_DMA_ADDR	(0xE4000000)
-#define CFG_PCMCIA_DMA_SIZE	( 64 << 20 )
-#define CFG_PCMCIA_ATTRB_ADDR	(0xE8000000)
-#define CFG_PCMCIA_ATTRB_SIZE	( 64 << 20 )
-#define CFG_PCMCIA_IO_ADDR	(0xEC000000)
-#define CFG_PCMCIA_IO_SIZE	( 64 << 20 )
+#define CONFIG_SYS_PCMCIA_MEM_ADDR	(0xE0000000)
+#define CONFIG_SYS_PCMCIA_MEM_SIZE	( 64 << 20 )
+#define CONFIG_SYS_PCMCIA_DMA_ADDR	(0xE4000000)
+#define CONFIG_SYS_PCMCIA_DMA_SIZE	( 64 << 20 )
+#define CONFIG_SYS_PCMCIA_ATTRB_ADDR	(0xE8000000)
+#define CONFIG_SYS_PCMCIA_ATTRB_SIZE	( 64 << 20 )
+#define CONFIG_SYS_PCMCIA_IO_ADDR	(0xEC000000)
+#define CONFIG_SYS_PCMCIA_IO_SIZE	( 64 << 20 )
 
 /*-----------------------------------------------------------------------
  * IDE/ATA stuff (Supports IDE harddisk on PCMCIA Adapter)
@@ -352,28 +352,28 @@
 #undef	CONFIG_IDE_LED			/* LED	 for ide not supported	*/
 #undef	CONFIG_IDE_RESET		/* reset for ide not supported	*/
 
-#define CFG_IDE_MAXBUS		1	/* max. 1 IDE bus		*/
-#define CFG_IDE_MAXDEVICE	1	/* max. 1 drive per IDE bus	*/
+#define CONFIG_SYS_IDE_MAXBUS		1	/* max. 1 IDE bus		*/
+#define CONFIG_SYS_IDE_MAXDEVICE	1	/* max. 1 drive per IDE bus	*/
 
-#define CFG_ATA_IDE0_OFFSET	0x0000
+#define CONFIG_SYS_ATA_IDE0_OFFSET	0x0000
 
-#define CFG_ATA_BASE_ADDR	CFG_PCMCIA_MEM_ADDR
+#define CONFIG_SYS_ATA_BASE_ADDR	CONFIG_SYS_PCMCIA_MEM_ADDR
 
 /* Offset for data I/O			*/
-#define CFG_ATA_DATA_OFFSET	(CFG_PCMCIA_MEM_SIZE + 0x320)
+#define CONFIG_SYS_ATA_DATA_OFFSET	(CONFIG_SYS_PCMCIA_MEM_SIZE + 0x320)
 
 /* Offset for normal register accesses	*/
-#define CFG_ATA_REG_OFFSET	(2 * CFG_PCMCIA_MEM_SIZE + 0x320)
+#define CONFIG_SYS_ATA_REG_OFFSET	(2 * CONFIG_SYS_PCMCIA_MEM_SIZE + 0x320)
 
 /* Offset for alternate registers	*/
-#define CFG_ATA_ALT_OFFSET	0x0100
+#define CONFIG_SYS_ATA_ALT_OFFSET	0x0100
 
 /*-----------------------------------------------------------------------
  *
  *-----------------------------------------------------------------------
  *
  */
-#define CFG_DER 0
+#define CONFIG_SYS_DER 0
 
 /*
  * Init Memory Controller:
@@ -388,22 +388,22 @@
  * restrict access enough to keep SRAM working (if any)
  * but not too much to meddle with FLASH accesses
  */
-#define CFG_REMAP_OR_AM		0x80000000	/* OR addr mask */
-#define CFG_PRELIM_OR_AM	0xE0000000	/* OR addr mask */
+#define CONFIG_SYS_REMAP_OR_AM		0x80000000	/* OR addr mask */
+#define CONFIG_SYS_PRELIM_OR_AM	0xE0000000	/* OR addr mask */
 
 /*
  * FLASH timing: Default value of OR0 after reset
  */
-#define CFG_OR_TIMING_FLASH	(OR_CSNT_SAM | OR_ACS_MSK | OR_BI | \
+#define CONFIG_SYS_OR_TIMING_FLASH	(OR_CSNT_SAM | OR_ACS_MSK | OR_BI | \
 				 OR_SCY_6_CLK | OR_TRLX)
 
-#define CFG_OR0_REMAP	(CFG_REMAP_OR_AM  | CFG_OR_TIMING_FLASH)
-#define CFG_OR0_PRELIM	(CFG_PRELIM_OR_AM | CFG_OR_TIMING_FLASH)
-#define CFG_BR0_PRELIM	((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_V )
+#define CONFIG_SYS_OR0_REMAP	(CONFIG_SYS_REMAP_OR_AM  | CONFIG_SYS_OR_TIMING_FLASH)
+#define CONFIG_SYS_OR0_PRELIM	(CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_FLASH)
+#define CONFIG_SYS_BR0_PRELIM	((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_V )
 
-#define CFG_OR1_REMAP	CFG_OR0_REMAP
-#define CFG_OR1_PRELIM	CFG_OR0_PRELIM
-#define CFG_BR1_PRELIM	((FLASH_BASE1_PRELIM & BR_BA_MSK) | BR_V )
+#define CONFIG_SYS_OR1_REMAP	CONFIG_SYS_OR0_REMAP
+#define CONFIG_SYS_OR1_PRELIM	CONFIG_SYS_OR0_PRELIM
+#define CONFIG_SYS_BR1_PRELIM	((FLASH_BASE1_PRELIM & BR_BA_MSK) | BR_V )
 
 /*
  * BR2/3 and OR2/3 (SDRAM)
@@ -414,19 +414,19 @@
 #define SDRAM_MAX_SIZE		(256 << 20)	/* max 256 MB per bank	*/
 
 /* SDRAM timing: Multiplexed addresses, GPL5 output to GPL5_A (don't care)	*/
-#define CFG_OR_TIMING_SDRAM	0x00000A00
+#define CONFIG_SYS_OR_TIMING_SDRAM	0x00000A00
 
-#define CFG_OR2_PRELIM	(CFG_PRELIM_OR_AM | CFG_OR_TIMING_SDRAM )
-#define CFG_BR2_PRELIM	((SDRAM_BASE2_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
+#define CONFIG_SYS_OR2_PRELIM	(CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_SDRAM )
+#define CONFIG_SYS_BR2_PRELIM	((SDRAM_BASE2_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
 
 #ifndef CONFIG_CAN_DRIVER
-#define CFG_OR3_PRELIM	CFG_OR2_PRELIM
-#define CFG_BR3_PRELIM	((SDRAM_BASE3_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
+#define CONFIG_SYS_OR3_PRELIM	CONFIG_SYS_OR2_PRELIM
+#define CONFIG_SYS_BR3_PRELIM	((SDRAM_BASE3_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
 #else	/* CAN uses CS3#, so we can have only one SDRAM bank anyway */
-#define CFG_CAN_BASE		0xC0000000	/* CAN mapped at 0xC0000000	*/
-#define CFG_CAN_OR_AM		0xFFFF8000	/* 32 kB address mask		*/
-#define CFG_OR3_CAN		(CFG_CAN_OR_AM | OR_G5LA | OR_BI)
-#define CFG_BR3_CAN		((CFG_CAN_BASE & BR_BA_MSK) | \
+#define CONFIG_SYS_CAN_BASE		0xC0000000	/* CAN mapped at 0xC0000000	*/
+#define CONFIG_SYS_CAN_OR_AM		0xFFFF8000	/* 32 kB address mask		*/
+#define CONFIG_SYS_OR3_CAN		(CONFIG_SYS_CAN_OR_AM | OR_G5LA | OR_BI)
+#define CONFIG_SYS_BR3_CAN		((CONFIG_SYS_CAN_BASE & BR_BA_MSK) | \
 					BR_PS_8 | BR_MS_UPMB | BR_V )
 #endif	/* CONFIG_CAN_DRIVER */
 
@@ -437,48 +437,48 @@
  * 4	Number of refresh cycles per period
  * 64	Refresh cycle in ms per number of rows
  */
-#define CFG_PTA_PER_CLK	((4096 * 64 * 1000) / (4 * 64))
+#define CONFIG_SYS_PTA_PER_CLK	((4096 * 64 * 1000) / (4 * 64))
 
 /*
  * Periodic timer (MAMR[PTx]) for 4 * 7.8 us refresh (= 31.2 us per quad)
  *
  *                        CPUclock(MHz) * 31.2
- * CFG_MAMR_PTA = -----------------------------------     with DFBRG = 0
+ * CONFIG_SYS_MAMR_PTA = -----------------------------------     with DFBRG = 0
  *                2^(2*SCCR[DFBRG]) * MPTPR_PTP_DIV16
  *
- * CPU clock =  15 MHz:  CFG_MAMR_PTA =  29   ->  4 * 7.73 us
- * CPU clock =  50 MHz:  CFG_MAMR_PTA =  97   ->  4 * 7.76 us
- * CPU clock =  66 MHz:  CFG_MAMR_PTA = 128   ->  4 * 7.75 us
- * CPU clock = 133 MHz:  CFG_MAMR_PTA = 255   ->  4 * 7.67 us
+ * CPU clock =  15 MHz:  CONFIG_SYS_MAMR_PTA =  29   ->  4 * 7.73 us
+ * CPU clock =  50 MHz:  CONFIG_SYS_MAMR_PTA =  97   ->  4 * 7.76 us
+ * CPU clock =  66 MHz:  CONFIG_SYS_MAMR_PTA = 128   ->  4 * 7.75 us
+ * CPU clock = 133 MHz:  CONFIG_SYS_MAMR_PTA = 255   ->  4 * 7.67 us
  *
  * Value 97 is for 4 * 7.8 us at 50 MHz. So the refresh cycle requirement will
  * be met also in the default configuration, i.e. if environment variable
  * 'cpuclk' is not set.
  */
-#define CFG_MAMR_PTA		128
+#define CONFIG_SYS_MAMR_PTA		128
 
 /*
  * Memory Periodic Timer Prescaler Register (MPTPR) values.
  */
 /* 4 * 7.8 us refresh (= 31.2 us per quad) at 50 MHz and PTA = 97 */
-#define CFG_MPTPR_2BK_4K	MPTPR_PTP_DIV16
+#define CONFIG_SYS_MPTPR_2BK_4K	MPTPR_PTP_DIV16
 /* 4 * 3.9 us refresh (= 15.6 us per quad) at 50 MHz and PTA = 97 */
-#define CFG_MPTPR_2BK_8K	MPTPR_PTP_DIV8
+#define CONFIG_SYS_MPTPR_2BK_8K	MPTPR_PTP_DIV8
 
 /*
  * MAMR settings for SDRAM
  */
 
 /* 8 column SDRAM */
-#define CFG_MAMR_8COL	((CFG_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
+#define CONFIG_SYS_MAMR_8COL	((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
 			 MAMR_AMA_TYPE_0 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A11 |	\
 			 MAMR_RLFA_1X	 | MAMR_WLFA_1X	   | MAMR_TLFA_4X)
 /* 9 column SDRAM */
-#define CFG_MAMR_9COL	((CFG_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
+#define CONFIG_SYS_MAMR_9COL	((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
 			 MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 |	\
 			 MAMR_RLFA_1X	 | MAMR_WLFA_1X	   | MAMR_TLFA_4X)
 /* 10 column SDRAM */
-#define CFG_MAMR_10COL	((CFG_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
+#define CONFIG_SYS_MAMR_10COL	((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
 			 MAMR_AMA_TYPE_2 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A9  |	\
 			 MAMR_RLFA_1X	 | MAMR_WLFA_1X	   | MAMR_TLFA_4X)
 
@@ -499,12 +499,12 @@
 
 #define CONFIG_LAST_STAGE_INIT		1 /* Have to configure PHYs for Linux */
 
-/* CFG_DISCOVER_PHY only works with FEC if only one interface is enabled */
+/* CONFIG_SYS_DISCOVER_PHY only works with FEC if only one interface is enabled */
 #if (!defined(CONFIG_ETHER_ON_FEC1) || !defined(CONFIG_ETHER_ON_FEC2))
-#define CFG_DISCOVER_PHY
+#define CONFIG_SYS_DISCOVER_PHY
 #endif
 
-#ifndef CFG_DISCOVER_PHY
+#ifndef CONFIG_SYS_DISCOVER_PHY
 /* PHY addresses - hard wired in hardware */
 #define CONFIG_FEC1_PHY	1
 #define CONFIG_FEC2_PHY	2
diff --git a/include/configs/TOP5200.h b/include/configs/TOP5200.h
index 4c447356a..046948e74 100644
--- a/include/configs/TOP5200.h
+++ b/include/configs/TOP5200.h
@@ -45,7 +45,7 @@
 #define CONFIG_MPC5200		1	/* More exactly a MPC5200 */
 #define CONFIG_TOP5200		1	/* ... on TOP5200 board - we need this for FEC.C */
 
-#define CFG_MPC5XXX_CLKIN	33000000 /* ... running at 33.000000MHz */
+#define CONFIG_SYS_MPC5XXX_CLKIN	33000000 /* ... running at 33.000000MHz */
 
 #define BOOTFLAG_COLD		0x01	/* Normal Power-On: Boot from FLASH  */
 #define BOOTFLAG_WARM		0x02	/* Software reboot	     */
@@ -57,7 +57,7 @@
  */
 #define CONFIG_PSC_CONSOLE	1	/* console is on PSC1 */
 #define CONFIG_BAUDRATE		9600	/* ... at 9600 bps */
-#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
 
 
 #if defined (CONFIG_EVAL5200) || defined (CONFIG_LITE5200)
@@ -139,8 +139,8 @@
  * MUST be low boot - HIGHBOOT is not supported anymore
  */
 #if (TEXT_BASE == 0xFF000000)		/* Boot low with 16 MB Flash */
-#   define CFG_LOWBOOT		1
-#   define CFG_LOWBOOT16	1
+#   define CONFIG_SYS_LOWBOOT		1
+#   define CONFIG_SYS_LOWBOOT16	1
 #else
 #   error "TEXT_BASE must be 0xff000000"
 #endif
@@ -178,7 +178,7 @@
 /*
  * IPB Bus clocking configuration.
  */
-#undef CFG_IPBCLK_EQUALS_XLBCLK		/* define for 133MHz speed */
+#undef CONFIG_SYS_IPBCLK_EQUALS_XLBCLK		/* define for 133MHz speed */
 
 /*
  * I2C configuration
@@ -186,11 +186,11 @@
 /*
  * EEPROM configuration
  */
-#define CFG_EEPROM_PAGE_WRITE_BITS	3
-#define CFG_EEPROM_PAGE_WRITE_DELAY_MS	70
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS	3
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	70
 
-#define CFG_I2C_EEPROM_ADDR_LEN 2
-#define CFG_EEPROM_SIZE 0x2000
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
+#define CONFIG_SYS_EEPROM_SIZE 0x2000
 
 #define CONFIG_ENV_OVERWRITE
 #define CONFIG_MISC_INIT_R
@@ -201,11 +201,11 @@
 #if defined (CONFIG_SOFT_I2C)
 #  define SDA0			0x40
 #  define SCL0			0x80
-#  define GPIOE0		*((volatile uchar*)(CFG_MBAR+0x0c00))
-#  define DDR0			*((volatile uchar*)(CFG_MBAR+0x0c08))
-#  define DVO0			*((volatile uchar*)(CFG_MBAR+0x0c0c))
-#  define DVI0			*((volatile uchar*)(CFG_MBAR+0x0c20))
-#  define ODE0			*((volatile uchar*)(CFG_MBAR+0x0c04))
+#  define GPIOE0		*((volatile uchar*)(CONFIG_SYS_MBAR+0x0c00))
+#  define DDR0			*((volatile uchar*)(CONFIG_SYS_MBAR+0x0c08))
+#  define DVO0			*((volatile uchar*)(CONFIG_SYS_MBAR+0x0c0c))
+#  define DVI0			*((volatile uchar*)(CONFIG_SYS_MBAR+0x0c20))
+#  define ODE0			*((volatile uchar*)(CONFIG_SYS_MBAR+0x0c04))
 #  define I2C_INIT		{GPIOE0|=(SDA0|SCL0);ODE0|=(SDA0|SCL0);DVO0|=(SDA0|SCL0);DDR0|=(SDA0|SCL0);}
 #  define I2C_READ		((DVI0&SDA0)?1:0)
 #  define I2C_SDA(x)	{if(x)DVO0|=SDA0;else DVO0&=~SDA0;}
@@ -213,32 +213,32 @@
 #  define I2C_DELAY		{udelay(5);}
 #  define I2C_ACTIVE	{DDR0|=SDA0;}
 #  define I2C_TRISTATE	{DDR0&=~SDA0;}
-#  define CFG_I2C_SPEED		100000
-#  define CFG_I2C_SLAVE		0x7F
-#define CFG_I2C_EEPROM_ADDR 0x57
-#define CFG_I2C_FACT_ADDR	0x57
+#  define CONFIG_SYS_I2C_SPEED		100000
+#  define CONFIG_SYS_I2C_SLAVE		0x7F
+#define CONFIG_SYS_I2C_EEPROM_ADDR 0x57
+#define CONFIG_SYS_I2C_FACT_ADDR	0x57
 #endif
 
 #if defined (CONFIG_HARD_I2C)
-#  define CFG_I2C_MODULE	2		/* Select I2C module #1 or #2 */
-#  define CFG_I2C_SPEED		100000	/* 100 kHz */
-#  define CFG_I2C_SLAVE		0x7F
-#define CFG_I2C_EEPROM_ADDR 0x54
-#define CFG_I2C_FACT_ADDR	0x54
+#  define CONFIG_SYS_I2C_MODULE	2		/* Select I2C module #1 or #2 */
+#  define CONFIG_SYS_I2C_SPEED		100000	/* 100 kHz */
+#  define CONFIG_SYS_I2C_SLAVE		0x7F
+#define CONFIG_SYS_I2C_EEPROM_ADDR 0x54
+#define CONFIG_SYS_I2C_FACT_ADDR	0x54
 #endif
 
 /*
  * Flash configuration, expect one 16 Megabyte Bank at most
  */
-#define CFG_FLASH_BASE		0xff000000
-#define CFG_FLASH_SIZE		0x01000000
-#define CFG_MAX_FLASH_BANKS	1	/* max num of memory banks      */
-#define CFG_ENV_ADDR		(CFG_FLASH_BASE + 0)
+#define CONFIG_SYS_FLASH_BASE		0xff000000
+#define CONFIG_SYS_FLASH_SIZE		0x01000000
+#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max num of memory banks      */
+#define CONFIG_ENV_ADDR		(CONFIG_SYS_FLASH_BASE + 0)
 
-#define CFG_MAX_FLASH_SECT	256	/* max num of sects on one chip */
+#define CONFIG_SYS_MAX_FLASH_SECT	256	/* max num of sects on one chip */
 
-#define CFG_FLASH_ERASE_TOUT	240000	/* Flash Erase Timeout (in ms)  */
-#define CFG_FLASH_WRITE_TOUT	500	/* Flash Write Timeout (in ms)  */
+#define CONFIG_SYS_FLASH_ERASE_TOUT	240000	/* Flash Erase Timeout (in ms)  */
+#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Flash Write Timeout (in ms)  */
 
 #undef CONFIG_FLASH_16BIT	/* Flash is 8-bit */
 
@@ -247,66 +247,66 @@
  */
 #if 0
 /* 2x MT48LC16M16A2 - 7.0 ns SDRAMS = 64 MegaBytes Total */
-#define	CFG_DRAM_DDR		0
-#define CFG_DRAM_EMODE		0
-#define CFG_DRAM_MODE		0x008D
-#define CFG_DRAM_CONTROL	0x514F0000
-#define CFG_DRAM_CONFIG1	0xC2233A00
-#define CFG_DRAM_CONFIG2	0x88B70004
-#define	CFG_DRAM_TAP_DEL	0x08
-#define CFG_DRAM_RAM_SIZE	0x19
+#define	CONFIG_SYS_DRAM_DDR		0
+#define CONFIG_SYS_DRAM_EMODE		0
+#define CONFIG_SYS_DRAM_MODE		0x008D
+#define CONFIG_SYS_DRAM_CONTROL	0x514F0000
+#define CONFIG_SYS_DRAM_CONFIG1	0xC2233A00
+#define CONFIG_SYS_DRAM_CONFIG2	0x88B70004
+#define	CONFIG_SYS_DRAM_TAP_DEL	0x08
+#define CONFIG_SYS_DRAM_RAM_SIZE	0x19
 #endif
 #if 1
 /* 2x MT48LC16M16A2 - 7.5 ns SDRAMS = 64 MegaBytes Total */
-#define	CFG_DRAM_DDR		0
-#define CFG_DRAM_EMODE		0
-#define CFG_DRAM_MODE		0x00CD
-#define CFG_DRAM_CONTROL	0x514F0000
-#define CFG_DRAM_CONFIG1	0xD2333A00
-#define CFG_DRAM_CONFIG2	0x8AD70004
-#define	CFG_DRAM_TAP_DEL	0x08
-#define CFG_DRAM_RAM_SIZE	0x19
+#define	CONFIG_SYS_DRAM_DDR		0
+#define CONFIG_SYS_DRAM_EMODE		0
+#define CONFIG_SYS_DRAM_MODE		0x00CD
+#define CONFIG_SYS_DRAM_CONTROL	0x514F0000
+#define CONFIG_SYS_DRAM_CONFIG1	0xD2333A00
+#define CONFIG_SYS_DRAM_CONFIG2	0x8AD70004
+#define	CONFIG_SYS_DRAM_TAP_DEL	0x08
+#define CONFIG_SYS_DRAM_RAM_SIZE	0x19
 #endif
 
 /*
  * Environment settings
  */
-#define CFG_ENV_IS_IN_EEPROM	1	/* turn on EEPROM env feature */
-#define CFG_ENV_OFFSET		0x1000
-#define CFG_ENV_SIZE		0x0700
+#define CONFIG_ENV_IS_IN_EEPROM	1	/* turn on EEPROM env feature */
+#define CONFIG_ENV_OFFSET		0x1000
+#define CONFIG_ENV_SIZE		0x0700
 
 /*
  * VPD settings
  */
-#define CFG_FACT_OFFSET		0x1800
-#define CFG_FACT_SIZE		0x0800
+#define CONFIG_SYS_FACT_OFFSET		0x1800
+#define CONFIG_SYS_FACT_SIZE		0x0800
 
 /*
  * Memory map
  *
  * Warning!!! with the current BestComm Task, MBAR MUST BE set to 0xf0000000
  */
-#define CFG_MBAR			0xf0000000	/* DO NOT CHANGE this */
-#define CFG_SDRAM_BASE		0x00000000
-#define CFG_DEFAULT_MBAR	0x80000000
+#define CONFIG_SYS_MBAR			0xf0000000	/* DO NOT CHANGE this */
+#define CONFIG_SYS_SDRAM_BASE		0x00000000
+#define CONFIG_SYS_DEFAULT_MBAR	0x80000000
 
 /* Use SRAM until RAM will be available */
-#define CFG_INIT_RAM_ADDR	MPC5XXX_SRAM
-#define CFG_INIT_RAM_END	MPC5XXX_SRAM_SIZE	/* End of used area in DPRAM */
+#define CONFIG_SYS_INIT_RAM_ADDR	MPC5XXX_SRAM
+#define CONFIG_SYS_INIT_RAM_END	MPC5XXX_SRAM_SIZE	/* End of used area in DPRAM */
 
 
-#define CFG_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
-#define CFG_MONITOR_BASE    TEXT_BASE
-#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
-#   define CFG_RAMBOOT		1
+#define CONFIG_SYS_MONITOR_BASE    TEXT_BASE
+#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
+#   define CONFIG_SYS_RAMBOOT		1
 #endif
 
-#define CFG_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor	*/
-#define CFG_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/
-#define CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
+#define CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor	*/
+#define CONFIG_SYS_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/
+#define CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
 
 /*
  * Ethernet configuration
@@ -321,32 +321,32 @@
  * PCI disabled
  * Ethernet 100 with MD
  */
-#define CFG_GPS_PORT_CONFIG	0x00058044
+#define CONFIG_SYS_GPS_PORT_CONFIG	0x00058044
 
 /*
  * Miscellaneous configurable options
  */
-#define CFG_LONGHELP			/* undef to save memory	    */
-#define CFG_PROMPT		"=> "	/* Monitor Command Prompt   */
+#define CONFIG_SYS_LONGHELP			/* undef to save memory	    */
+#define CONFIG_SYS_PROMPT		"=> "	/* Monitor Command Prompt   */
 #if defined(CONFIG_CMD_KGDB)
-#  define CFG_CBSIZE		1024	/* Console I/O Buffer Size  */
+#  define CONFIG_SYS_CBSIZE		1024	/* Console I/O Buffer Size  */
 #else
-#  define CFG_CBSIZE		256	/* Console I/O Buffer Size  */
+#  define CONFIG_SYS_CBSIZE		256	/* Console I/O Buffer Size  */
 #endif
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16)	/* Print Buffer Size */
-#define CFG_MAXARGS		16		/* max number of command args	*/
-#define CFG_BARGSIZE		CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)	/* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS		16		/* max number of command args	*/
+#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
 
-#define CFG_MEMTEST_START	0x00100000	/* memtest works on */
-#define CFG_MEMTEST_END		0x01f00000	/* 1 ... 31 MB in DRAM	*/
+#define CONFIG_SYS_MEMTEST_START	0x00100000	/* memtest works on */
+#define CONFIG_SYS_MEMTEST_END		0x01f00000	/* 1 ... 31 MB in DRAM	*/
 
-#define CFG_LOAD_ADDR		0x200000	/* default load address */
+#define CONFIG_SYS_LOAD_ADDR		0x200000	/* default load address */
 
-#define CFG_HZ			1000	/* decrementer freq: 1 ms ticks */
+#define CONFIG_SYS_HZ			1000	/* decrementer freq: 1 ms ticks */
 
-#define CFG_CACHELINE_SIZE	32	/* For MPC5xxx CPUs */
+#define CONFIG_SYS_CACHELINE_SIZE	32	/* For MPC5xxx CPUs */
 #if defined(CONFIG_CMD_KGDB)
-#  define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value */
+#  define CONFIG_SYS_CACHELINE_SHIFT	5	/* log base 2 of the above value */
 #endif
 
 
@@ -354,12 +354,12 @@
   #define CONFIG_RTC_MK48T59	1	/* use M48T08 on EVAL5200 */
   #define RTC(reg)		(0xf0010000+reg)
   /* setup CS2 for M48T08. Must MAP 64kB */
-  #define CFG_CS2_START	RTC(0)
-  #define CFG_CS2_SIZE	0x10000
+  #define CONFIG_SYS_CS2_START	RTC(0)
+  #define CONFIG_SYS_CS2_SIZE	0x10000
   /* setup CS2 configuration register: */
   /* WaitP = 0, WaitX = 4, MX=0, AL=1, AA=1, CE=1 */
   /* AS=2, DS=0, Bank=0, WTyp=0, WS=0, RS=0, WO=0, RO=0 */
-  #define CFG_CS2_CFG	0x00047800
+  #define CONFIG_SYS_CS2_CFG	0x00047800
 #else
   #define CONFIG_RTC_MPC5200	1	/* use internal MPC5200 RTC */
 #endif
@@ -367,19 +367,19 @@
 /*
  * Various low-level settings
  */
-#define CFG_HID0_INIT		HID0_ICE | HID0_ICFI
-#define CFG_HID0_FINAL		HID0_ICE
+#define CONFIG_SYS_HID0_INIT		HID0_ICE | HID0_ICFI
+#define CONFIG_SYS_HID0_FINAL		HID0_ICE
 
-#define CFG_BOOTCS_START	CFG_FLASH_BASE
-#define CFG_BOOTCS_SIZE		CFG_FLASH_SIZE
-#define CFG_BOOTCS_CFG		0x00047801
-#define CFG_CS0_START		CFG_FLASH_BASE
-#define CFG_CS0_SIZE		CFG_FLASH_SIZE
+#define CONFIG_SYS_BOOTCS_START	CONFIG_SYS_FLASH_BASE
+#define CONFIG_SYS_BOOTCS_SIZE		CONFIG_SYS_FLASH_SIZE
+#define CONFIG_SYS_BOOTCS_CFG		0x00047801
+#define CONFIG_SYS_CS0_START		CONFIG_SYS_FLASH_BASE
+#define CONFIG_SYS_CS0_SIZE		CONFIG_SYS_FLASH_SIZE
 
-#define CFG_CS_BURST		0x00000000
-#define CFG_CS_DEADCYCLE	0x33333333
+#define CONFIG_SYS_CS_BURST		0x00000000
+#define CONFIG_SYS_CS_DEADCYCLE	0x33333333
 
-#define CFG_RESET_ADDRESS	0x7f000000
+#define CONFIG_SYS_RESET_ADDRESS	0x7f000000
 
 /*-----------------------------------------------------------------------
  * IDE/ATA stuff Supports IDE harddisk
@@ -394,23 +394,23 @@
 #define CONFIG_IDE_RESET	1
 #define CONFIG_IDE_PREINIT
 
-#define CFG_IDE_MAXBUS		1	/* max. 1 IDE bus		*/
-#define CFG_IDE_MAXDEVICE	1	/* max. 1 drive per IDE bus	*/
+#define CONFIG_SYS_IDE_MAXBUS		1	/* max. 1 IDE bus		*/
+#define CONFIG_SYS_IDE_MAXDEVICE	1	/* max. 1 drive per IDE bus	*/
 
-#define CFG_ATA_IDE0_OFFSET	0x0000
+#define CONFIG_SYS_ATA_IDE0_OFFSET	0x0000
 
-#define CFG_ATA_BASE_ADDR	MPC5XXX_ATA
+#define CONFIG_SYS_ATA_BASE_ADDR	MPC5XXX_ATA
 
 /* Offset for data I/O			*/
-#define CFG_ATA_DATA_OFFSET	(0x0060)
+#define CONFIG_SYS_ATA_DATA_OFFSET	(0x0060)
 
 /* Offset for normal register accesses	*/
-#define CFG_ATA_REG_OFFSET	(CFG_ATA_DATA_OFFSET)
+#define CONFIG_SYS_ATA_REG_OFFSET	(CONFIG_SYS_ATA_DATA_OFFSET)
 
 /* Offset for alternate registers	*/
-#define CFG_ATA_ALT_OFFSET	(0x005c)
+#define CONFIG_SYS_ATA_ALT_OFFSET	(0x005c)
 
 /* Interval between registers                                                */
-#define CFG_ATA_STRIDE          4
+#define CONFIG_SYS_ATA_STRIDE          4
 
 #endif /* __CONFIG_H */
diff --git a/include/configs/TOP860.h b/include/configs/TOP860.h
index 151c407c8..8c2befbf0 100644
--- a/include/configs/TOP860.h
+++ b/include/configs/TOP860.h
@@ -60,7 +60,7 @@
  * CLOCK settings
  */
 #define	CONFIG_SYSCLK	49152000
-#define	CFG_XTAL		32768
+#define	CONFIG_SYS_XTAL		32768
 #define	CONFIG_EBDF		1
 #define	CONFIG_COM		3
 #define	CONFIG_RTC_MPC8xx
@@ -68,32 +68,32 @@
 /*-----------------------------------------------------------------------
  * Physical memory map as defined by EMK
  */
-#define CFG_IMMR		0xFFF00000	/* Internal Memory Mapped Register */
-#define	CFG_FLASH_BASE	0x80000000	/* FLASH in final mapping */
-#define	CFG_DRAM_BASE	0x00000000	/* DRAM in final mapping */
-#define	CFG_FLASH_MAX	0x00400000	/* max FLASH to expect */
-#define	CFG_DRAM_MAX	0x01000000	/* max DRAM to expect */
+#define CONFIG_SYS_IMMR		0xFFF00000	/* Internal Memory Mapped Register */
+#define	CONFIG_SYS_FLASH_BASE	0x80000000	/* FLASH in final mapping */
+#define	CONFIG_SYS_DRAM_BASE	0x00000000	/* DRAM in final mapping */
+#define	CONFIG_SYS_FLASH_MAX	0x00400000	/* max FLASH to expect */
+#define	CONFIG_SYS_DRAM_MAX	0x01000000	/* max DRAM to expect */
 
 /*-----------------------------------------------------------------------
  * derived values
  */
-#define	CFG_MF			(CONFIG_SYSCLK/CFG_XTAL)
-#define	CFG_CPUCLOCK	CONFIG_SYSCLK
-#define	CFG_BRGCLOCK	CONFIG_SYSCLK
-#define	CFG_BUSCLOCK	(CONFIG_SYSCLK >> CONFIG_EBDF)
-#define CFG_HZ			1000	/* decrementer freq: 1 ms ticks */
+#define	CONFIG_SYS_MF			(CONFIG_SYSCLK/CONFIG_SYS_XTAL)
+#define	CONFIG_SYS_CPUCLOCK	CONFIG_SYSCLK
+#define	CONFIG_SYS_BRGCLOCK	CONFIG_SYSCLK
+#define	CONFIG_SYS_BUSCLOCK	(CONFIG_SYSCLK >> CONFIG_EBDF)
+#define CONFIG_SYS_HZ			1000	/* decrementer freq: 1 ms ticks */
 #define	CONFIG_8xx_GCLK_FREQ	CONFIG_SYSCLK
 
 /*-----------------------------------------------------------------------
  * FLASH organization
  */
-#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
-#define CFG_MAX_FLASH_SECT	128	/* max number of sectors on one chip	*/
+#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
+#define CONFIG_SYS_MAX_FLASH_SECT	128	/* max number of sectors on one chip	*/
 
-#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
-#define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
+#define CONFIG_SYS_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
+#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
 
-#define	CFG_FLASH_CFI
+#define	CONFIG_SYS_FLASH_CFI
 
 /*-----------------------------------------------------------------------
  * Command interpreter
@@ -105,7 +105,7 @@
 /*
  * Allow partial commands to be matched to uniqueness.
  */
-#define CFG_MATCH_PARTIAL_CMD
+#define CONFIG_SYS_MATCH_PARTIAL_CMD
 
 
 /*
@@ -126,53 +126,53 @@
 
 
 #define	CONFIG_AUTOSCRIPT		1
-#define	CFG_LOADS_BAUD_CHANGE	1
+#define	CONFIG_SYS_LOADS_BAUD_CHANGE	1
 #undef	CONFIG_LOADS_ECHO			/* NO echo on for serial download	*/
 
 
-#define CFG_LONGHELP			/* undef to save memory		*/
-#define CFG_PROMPT	"=> "		/* Monitor Command Prompt	*/
+#define CONFIG_SYS_LONGHELP			/* undef to save memory		*/
+#define CONFIG_SYS_PROMPT	"=> "		/* Monitor Command Prompt	*/
 
-#undef	CFG_HUSH_PARSER			/* Hush parse for U-Boot	*/
+#undef	CONFIG_SYS_HUSH_PARSER			/* Hush parse for U-Boot	*/
 
-#ifdef	CFG_HUSH_PARSER
- #define CFG_PROMPT_HUSH_PS2	"> "
+#ifdef	CONFIG_SYS_HUSH_PARSER
+ #define CONFIG_SYS_PROMPT_HUSH_PS2	"> "
 #endif
 
 #if defined(CONFIG_CMD_KGDB)
- #define CFG_CBSIZE	1024		/* Console I/O Buffer Size	*/
+ #define CONFIG_SYS_CBSIZE	1024		/* Console I/O Buffer Size	*/
 #else
- #define CFG_CBSIZE	256		/* Console I/O Buffer Size	*/
+ #define CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size	*/
 #endif
 
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define CFG_MAXARGS	16		/* max number of command args	*/
-#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS	16		/* max number of command args	*/
+#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
 
 /*-----------------------------------------------------------------------
  * Memory Test Command
  */
-#define CFG_MEMTEST_START	0x0400000	/* memtest works on	*/
-#define CFG_MEMTEST_END		0x0C00000	/* 4 ... 12 MB in DRAM	*/
+#define CONFIG_SYS_MEMTEST_START	0x0400000	/* memtest works on	*/
+#define CONFIG_SYS_MEMTEST_END		0x0C00000	/* 4 ... 12 MB in DRAM	*/
 
 /*-----------------------------------------------------------------------
  * Environment handler
  * only the first 6k in EEPROM are available for user. Of that we use 256b
  */
 #define	CONFIG_SOFT_I2C
-#define CFG_ENV_IS_IN_EEPROM	1	/* turn on EEPROM env feature */
-#define CFG_ENV_OFFSET		0x1000
-#define CFG_ENV_SIZE		0x0700
-#define CFG_I2C_EEPROM_ADDR 0x57
-#define CFG_FACT_OFFSET		0x1800
-#define CFG_FACT_SIZE		0x0800
-#define CFG_I2C_FACT_ADDR	0x57
-#define CFG_EEPROM_PAGE_WRITE_BITS 3
-#define CFG_I2C_EEPROM_ADDR_LEN 2
-#define CFG_EEPROM_SIZE 0x2000
-#define	CFG_I2C_SPEED	100000
-#define	CFG_I2C_SLAVE	0xFE
-#define	CFG_EEPROM_PAGE_WRITE_DELAY_MS 12
+#define CONFIG_ENV_IS_IN_EEPROM	1	/* turn on EEPROM env feature */
+#define CONFIG_ENV_OFFSET		0x1000
+#define CONFIG_ENV_SIZE		0x0700
+#define CONFIG_SYS_I2C_EEPROM_ADDR 0x57
+#define CONFIG_SYS_FACT_OFFSET		0x1800
+#define CONFIG_SYS_FACT_SIZE		0x0800
+#define CONFIG_SYS_I2C_FACT_ADDR	0x57
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
+#define CONFIG_SYS_EEPROM_SIZE 0x2000
+#define	CONFIG_SYS_I2C_SPEED	100000
+#define	CONFIG_SYS_I2C_SLAVE	0xFE
+#define	CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 12
 #define CONFIG_ENV_OVERWRITE
 #define CONFIG_MISC_INIT_R
 
@@ -195,7 +195,7 @@
 #define	I2C_TRISTATE	{ __I2C_DIR &= ~SDA; }
 #endif
 
-#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
 
 /*-----------------------------------------------------------------------
  * defines we need to get FEC running
@@ -203,7 +203,7 @@
 #define	CONFIG_NET_MULTI	1	/* the only way to get the FEC in */
 #define CONFIG_FEC_ENET		1	/* Ethernet only via FEC	*/
 #define	FEC_ENET		1	/* eth.c needs it that way... */
-#define CFG_DISCOVER_PHY	1
+#define CONFIG_SYS_DISCOVER_PHY	1
 #define CONFIG_MII		1
 #define CONFIG_MII_INIT		1
 #define CONFIG_PHY_ADDR		31
@@ -211,35 +211,35 @@
 /*-----------------------------------------------------------------------
  * adresses
  */
-#define CFG_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor	*/
-#define CFG_MONITOR_BASE	TEXT_BASE
-#define CFG_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/
+#define CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor	*/
+#define CONFIG_SYS_MONITOR_BASE	TEXT_BASE
+#define CONFIG_SYS_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/
 
 /*-----------------------------------------------------------------------
  * Start addresses for the final memory configuration
  * (Set up by the startup code)
- * Please note that CFG_SDRAM_BASE _must_ start at 0
+ * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
  */
-#define CFG_SDRAM_BASE		0x00000000
-#define CFG_FLASH_BASE		0x80000000
+#define CONFIG_SYS_SDRAM_BASE		0x00000000
+#define CONFIG_SYS_FLASH_BASE		0x80000000
 
 /*-----------------------------------------------------------------------
  * Definitions for initial stack pointer and data area (in DPRAM)
  */
-#define CFG_INIT_RAM_ADDR	CFG_IMMR
-#define CFG_INIT_RAM_END	0x2f00	/* End of used area in DPRAM	*/
-#define CFG_GBL_DATA_SIZE	64  /* size in bytes reserved for initial data */
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_VPD_SIZE	256 /* size in bytes reserved for vpd buffer */
-#define CFG_INIT_VPD_OFFSET	(CFG_GBL_DATA_OFFSET - CFG_INIT_VPD_SIZE)
-#define CFG_INIT_SP_OFFSET	(CFG_INIT_VPD_OFFSET-8)
+#define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_IMMR
+#define CONFIG_SYS_INIT_RAM_END	0x2f00	/* End of used area in DPRAM	*/
+#define CONFIG_SYS_GBL_DATA_SIZE	64  /* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_VPD_SIZE	256 /* size in bytes reserved for vpd buffer */
+#define CONFIG_SYS_INIT_VPD_OFFSET	(CONFIG_SYS_GBL_DATA_OFFSET - CONFIG_SYS_INIT_VPD_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET	(CONFIG_SYS_INIT_VPD_OFFSET-8)
 
 /*-----------------------------------------------------------------------
  * Cache Configuration
  */
-#define CFG_CACHELINE_SIZE	16	/* For all MPC8xx CPUs			*/
+#define CONFIG_SYS_CACHELINE_SIZE	16	/* For all MPC8xx CPUs			*/
 #if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT	4	/* log base 2 of the above value	*/
+#define CONFIG_SYS_CACHELINE_SHIFT	4	/* log base 2 of the above value	*/
 #endif
 
 /* Interrupt level assignments.
@@ -259,7 +259,7 @@
  *-----------------------------------------------------------------------
  *
  */
-#define CFG_DER 0					/* used in start.S */
+#define CONFIG_SYS_DER 0					/* used in start.S */
 
 /*-----------------------------------------------------------------------
  * PLPRCR - PLL, Low-Power, and Reset Control Register		15-30
@@ -279,7 +279,7 @@
  *	1	FIOPD	0			Force I/O pull down
  *	5	0		00000
  */
-#define CFG_PLPRCR	(PLPRCR_TEXPS | ((CFG_MF-1)<<20))
+#define CONFIG_SYS_PLPRCR	(PLPRCR_TEXPS | ((CONFIG_SYS_MF-1)<<20))
 
 /*-----------------------------------------------------------------------
  * SYPCR - System Protection Control				11-9
@@ -296,10 +296,10 @@
  *	1	SWP		0/1			Software watchdog prescale (1=/2048)
  */
 #if defined (CONFIG_WATCHDOG)
- #define CFG_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
+ #define CONFIG_SYS_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
 					 SYPCR_SWE  | SYPCR_SWRI| SYPCR_SWP)
 #else
- #define CFG_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF)
+ #define CONFIG_SYS_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF)
 #endif
 
 /*-----------------------------------------------------------------------
@@ -328,21 +328,21 @@
  *	1	B3DD	0			Bank 3 double drive
  *	4	0		0000
  */
-#define CFG_SIUMCR	(SIUMCR_MLRC11)
+#define CONFIG_SYS_SIUMCR	(SIUMCR_MLRC11)
 
 /*-----------------------------------------------------------------------
  * TBSCR - Time Base Status and Control				11-26
  *-----------------------------------------------------------------------
  * Clear Reference Interrupt Status, Timebase freezing enabled
  */
-#define CFG_TBSCR	(TBSCR_REFA | TBSCR_REFB | TBSCR_TBF)
+#define CONFIG_SYS_TBSCR	(TBSCR_REFA | TBSCR_REFB | TBSCR_TBF)
 
 /*-----------------------------------------------------------------------
  * PISCR - Periodic Interrupt Status and Control		11-31
  *-----------------------------------------------------------------------
  * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
  */
-#define CFG_PISCR	(PISCR_PS | PISCR_PITF | PISCR_PTE)
+#define CONFIG_SYS_PISCR	(PISCR_PS | PISCR_PITF | PISCR_PTE)
 
 /*-----------------------------------------------------------------------
  * SCCR - System Clock and reset Control Register		15-27
@@ -367,9 +367,9 @@
  */
 #define SCCR_MASK	0
 #ifdef CONFIG_EBDF
- #define CFG_SCCR	(SCCR_COM11 | SCCR_TBS | SCCR_EBDF01)
+ #define CONFIG_SYS_SCCR	(SCCR_COM11 | SCCR_TBS | SCCR_EBDF01)
 #else
- #define CFG_SCCR	(SCCR_COM11 | SCCR_TBS)
+ #define CONFIG_SYS_SCCR	(SCCR_COM11 | SCCR_TBS)
 #endif
 
 /*-----------------------------------------------------------------------
@@ -378,9 +378,9 @@
  * Preliminary Values
  */
 /* FLASH timing: CSNT=1 ACS=10 BIH=1 SCY=4 SETA=0 TLRX=1 EHTR=1	*/
-#define CFG_OR_TIMING_FLASH	(OR_CSNT_SAM  | OR_ACS_DIV4 | OR_BI | OR_SCY_4_CLK | OR_TRLX | OR_EHTR)
-#define CFG_OR0_PRELIM	(-CFG_FLASH_MAX | CFG_OR_TIMING_FLASH)
-#define CFG_BR0_PRELIM	(CFG_FLASH_BASE | BR_PS_16 | BR_V )
+#define CONFIG_SYS_OR_TIMING_FLASH	(OR_CSNT_SAM  | OR_ACS_DIV4 | OR_BI | OR_SCY_4_CLK | OR_TRLX | OR_EHTR)
+#define CONFIG_SYS_OR0_PRELIM	(-CONFIG_SYS_FLASH_MAX | CONFIG_SYS_OR_TIMING_FLASH)
+#define CONFIG_SYS_BR0_PRELIM	(CONFIG_SYS_FLASH_BASE | BR_PS_16 | BR_V )
 
 /*-----------------------------------------------------------------------
  * misc
@@ -428,15 +428,15 @@
 /*-----------------------------------------------------------------------
  * Defaults for Autoscript
  */
-#define CFG_LOAD_ADDR		0x00100000	/* default load address */
-#define	CFG_TFTP_LOADADDR	0x00100000
+#define CONFIG_SYS_LOAD_ADDR		0x00100000	/* default load address */
+#define	CONFIG_SYS_TFTP_LOADADDR	0x00100000
 
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
+#define CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
 
 
 #endif	/* __CONFIG_H */
diff --git a/include/configs/TQM5200.h b/include/configs/TQM5200.h
index 0ba745589..db7f51d4e 100644
--- a/include/configs/TQM5200.h
+++ b/include/configs/TQM5200.h
@@ -42,7 +42,7 @@
 #define CONFIG_STK52XX		1	/* ... on a STK52XX board		*/
 #endif
 
-#define CFG_MPC5XXX_CLKIN	33000000 /* ... running at 33.000000MHz		*/
+#define CONFIG_SYS_MPC5XXX_CLKIN	33000000 /* ... running at 33.000000MHz		*/
 
 #define BOOTFLAG_COLD		0x01	/* Normal Power-On: Boot from FLASH	*/
 #define BOOTFLAG_WARM		0x02	/* Software reboot			*/
@@ -54,11 +54,11 @@
  */
 #define CONFIG_PSC_CONSOLE	1	/* console is on PSC1			*/
 #define CONFIG_BAUDRATE		115200	/* ... at 115200 bps			*/
-#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
 #define CONFIG_BOOTCOUNT_LIMIT	1
 
 #ifdef CONFIG_FO300
-#define CFG_DEVICE_NULLDEV		1	/* enable null device */
+#define CONFIG_SYS_DEVICE_NULLDEV		1	/* enable null device */
 #define CONFIG_SILENT_CONSOLE		1	/* enable silent startup */
 #define CONFIG_BOARD_EARLY_INIT_F	1	/* used to detect S1 switch position */
 #define CONFIG_USB_BIN_FIXUP		1	/* for a buggy USB device */
@@ -75,7 +75,7 @@
 #define CONFIG_PS2KBD			/* AT-PS/2 Keyboard		*/
 #define CONFIG_PS2MULT			/* .. on PS/2 Multiplexer	*/
 #define CONFIG_PS2SERIAL	6	/* .. on PSC6			*/
-#define CONFIG_PS2MULT_DELAY	(CFG_HZ/2)	/* Initial delay	*/
+#define CONFIG_PS2MULT_DELAY	(CONFIG_SYS_HZ/2)	/* Initial delay	*/
 #define CONFIG_BOARD_EARLY_INIT_R
 #endif /* CONFIG_STK52XX */
 
@@ -99,7 +99,7 @@
 
 #define CONFIG_NET_MULTI	1
 #define CONFIG_EEPRO100		1
-#define CFG_RX_ETH_BUFFER	8  /* use 8 rx buffer on eepro100  */
+#define CONFIG_SYS_RX_ETH_BUFFER	8  /* use 8 rx buffer on eepro100  */
 #define CONFIG_NS8382X		1
 #endif	/* CONFIG_STK52XX */
 
@@ -122,7 +122,7 @@
 #define CONFIG_VGA_AS_SINGLE_DEVICE
 #define CONFIG_VIDEO_SW_CURSOR
 #define CONFIG_SPLASH_SCREEN
-#define CFG_CONSOLE_IS_IN_ENV
+#define CONFIG_SYS_CONSOLE_IS_IN_ENV
 #endif /* #ifndef CONFIG_TQM5200S */
 
 
@@ -134,24 +134,24 @@
 /* USB */
 #if defined(CONFIG_STK52XX) || defined(CONFIG_FO300)
 #define CONFIG_USB_OHCI_NEW
-#define CFG_OHCI_BE_CONTROLLER
+#define CONFIG_SYS_OHCI_BE_CONTROLLER
 #define CONFIG_USB_STORAGE
 #define CONFIG_CMD_FAT
 #define CONFIG_CMD_USB
 
-#undef CFG_USB_OHCI_BOARD_INIT
-#define CFG_USB_OHCI_CPU_INIT
-#define CFG_USB_OHCI_REGS_BASE	MPC5XXX_USB
-#define CFG_USB_OHCI_SLOT_NAME	"mpc5200"
-#define CFG_USB_OHCI_MAX_ROOT_PORTS	15
+#undef CONFIG_SYS_USB_OHCI_BOARD_INIT
+#define CONFIG_SYS_USB_OHCI_CPU_INIT
+#define CONFIG_SYS_USB_OHCI_REGS_BASE	MPC5XXX_USB
+#define CONFIG_SYS_USB_OHCI_SLOT_NAME	"mpc5200"
+#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS	15
 
 #endif
 
 #ifndef CONFIG_CAM5200
 /* POST support */
-#define CONFIG_POST		(CFG_POST_MEMORY   | \
-				 CFG_POST_CPU	   | \
-				 CFG_POST_I2C)
+#define CONFIG_POST		(CONFIG_SYS_POST_MEMORY   | \
+				 CONFIG_SYS_POST_CPU	   | \
+				 CONFIG_SYS_POST_I2C)
 #endif
 
 #ifdef CONFIG_POST
@@ -215,7 +215,7 @@
 #define	CONFIG_TIMESTAMP		/* display image timestamps */
 
 #if (TEXT_BASE != 0xFFF00000)
-#   define CFG_LOWBOOT		1	/* Boot low */
+#   define CONFIG_SYS_LOWBOOT		1	/* Boot low */
 #endif
 
 /*
@@ -229,7 +229,7 @@
 
 #undef	CONFIG_BOOTARGS
 
-#if defined(CONFIG_TQM5200_B) && !defined(CFG_LOWBOOT)
+#if defined(CONFIG_TQM5200_B) && !defined(CONFIG_SYS_LOWBOOT)
 # define ENV_UPDT							\
 	"update=protect off FFF00000 +${filesize};"			\
 		"erase FFF00000 +${filesize};"				\
@@ -307,17 +307,17 @@
 /*
  * IPB Bus clocking configuration.
  */
-#define CFG_IPBCLK_EQUALS_XLBCLK		/* define for 133MHz speed */
+#define CONFIG_SYS_IPBCLK_EQUALS_XLBCLK		/* define for 133MHz speed */
 
-#if defined(CFG_IPBCLK_EQUALS_XLBCLK) && !defined(CONFIG_CAM5200)
+#if defined(CONFIG_SYS_IPBCLK_EQUALS_XLBCLK) && !defined(CONFIG_CAM5200)
 /*
  * PCI Bus clocking configuration
  *
  * Actually a PCI Clock of 66 MHz is only set (in cpu_init.c) if
- * CFG_IPBCLK_EQUALS_XLBCLK is defined. This is because a PCI Clock of
+ * CONFIG_SYS_IPBCLK_EQUALS_XLBCLK is defined. This is because a PCI Clock of
  * 66 MHz yet hasn't been tested with a IPB Bus Clock of 66 MHz.
  */
-#define CFG_PCICLK_EQUALS_IPBCLK_DIV2	/* define for 66MHz speed */
+#define CONFIG_SYS_PCICLK_EQUALS_IPBCLK_DIV2	/* define for 66MHz speed */
 #endif
 
 /*
@@ -325,9 +325,9 @@
  */
 #define CONFIG_HARD_I2C		1	/* I2C with hardware support */
 #ifdef CONFIG_TQM5200_REV100
-#define CFG_I2C_MODULE		1	/* Select I2C module #1 for rev. 100 board */
+#define CONFIG_SYS_I2C_MODULE		1	/* Select I2C module #1 for rev. 100 board */
 #else
-#define CFG_I2C_MODULE		2	/* Select I2C module #2 for all other revs */
+#define CONFIG_SYS_I2C_MODULE		2	/* Select I2C module #2 for all other revs */
 #endif
 
 /*
@@ -336,11 +336,11 @@
  * Please notice, that the resulting clock frequency could differ from the
  * configured value. This is because the I2C clock is derived from system
  * clock over a frequency divider with only a few divider values. U-boot
- * calculates the best approximation for CFG_I2C_SPEED. However the calculated
+ * calculates the best approximation for CONFIG_SYS_I2C_SPEED. However the calculated
  * approximation allways lies below the configured value, never above.
  */
-#define CFG_I2C_SPEED		100000 /* 100 kHz */
-#define CFG_I2C_SLAVE		0x7F
+#define CONFIG_SYS_I2C_SPEED		100000 /* 100 kHz */
+#define CONFIG_SYS_I2C_SLAVE		0x7F
 
 /*
  * EEPROM configuration for onboard EEPROM M24C32 (M24C64 should work
@@ -348,62 +348,62 @@
  * EEPROM (24C64) is on the same I2C address (but on other I2C bus), so the
  * same configuration could be used.
  */
-#define CFG_I2C_EEPROM_ADDR		0x50	/* 1010000x */
-#define CFG_I2C_EEPROM_ADDR_LEN		2
-#define CFG_EEPROM_PAGE_WRITE_BITS	5	/* =32 Bytes per write */
-#define CFG_EEPROM_PAGE_WRITE_DELAY_MS	20
+#define CONFIG_SYS_I2C_EEPROM_ADDR		0x50	/* 1010000x */
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN		2
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS	5	/* =32 Bytes per write */
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	20
 
 /*
  * HW-Monitor configuration on Mini-FAP
  */
 #if defined (CONFIG_MINIFAP)
-#define CFG_I2C_HWMON_ADDR		0x2C
+#define CONFIG_SYS_I2C_HWMON_ADDR		0x2C
 #endif
 
 /* List of I2C addresses to be verified by POST */
 #if defined (CONFIG_MINIFAP)
 #undef I2C_ADDR_LIST
-#define I2C_ADDR_LIST	{	CFG_I2C_EEPROM_ADDR,	\
-				CFG_I2C_HWMON_ADDR,	\
-				CFG_I2C_SLAVE }
+#define I2C_ADDR_LIST	{	CONFIG_SYS_I2C_EEPROM_ADDR,	\
+				CONFIG_SYS_I2C_HWMON_ADDR,	\
+				CONFIG_SYS_I2C_SLAVE }
 #endif
 
 /*
  * Flash configuration
  */
-#define CFG_FLASH_BASE		0xFC000000
+#define CONFIG_SYS_FLASH_BASE		0xFC000000
 
 #if defined(CONFIG_CAM5200) && defined(CONFIG_CAM5200_NIOSFLASH)
-#define CFG_MAX_FLASH_BANKS	2	/* max num of flash banks
+#define CONFIG_SYS_MAX_FLASH_BANKS	2	/* max num of flash banks
 					   (= chip selects) */
-#define CFG_FLASH_WORD_SIZE	unsigned int /* main flash device with */
-#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms) */
-#define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms) */
-
-#define CFG_FLASH_ADDR0		0x555
-#define CFG_FLASH_ADDR1		0x2AA
-#define CFG_FLASH_2ND_16BIT_DEV	1	/* NIOS flash is a 16bit device */
-#define CFG_MAX_FLASH_SECT	128
+#define CONFIG_SYS_FLASH_WORD_SIZE	unsigned int /* main flash device with */
+#define CONFIG_SYS_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms) */
+#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms) */
+
+#define CONFIG_SYS_FLASH_ADDR0		0x555
+#define CONFIG_SYS_FLASH_ADDR1		0x2AA
+#define CONFIG_SYS_FLASH_2ND_16BIT_DEV	1	/* NIOS flash is a 16bit device */
+#define CONFIG_SYS_MAX_FLASH_SECT	128
 #else
 /* use CFI flash driver */
-#define CFG_FLASH_CFI		1	/* Flash is CFI conformant */
+#define CONFIG_SYS_FLASH_CFI		1	/* Flash is CFI conformant */
 #define CONFIG_FLASH_CFI_DRIVER	1	/* Use the common driver */
-#define CFG_FLASH_BANKS_LIST	{ CFG_BOOTCS_START }
-#define CFG_MAX_FLASH_BANKS	1	/* max num of flash banks
+#define CONFIG_SYS_FLASH_BANKS_LIST	{ CONFIG_SYS_BOOTCS_START }
+#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max num of flash banks
 					   (= chip selects) */
-#define CFG_MAX_FLASH_SECT	512	/* max num of sects on one chip */
+#define CONFIG_SYS_MAX_FLASH_SECT	512	/* max num of sects on one chip */
 #endif
 
-#define CFG_FLASH_EMPTY_INFO
-#define CFG_FLASH_SIZE		0x04000000 /* 64 MByte */
-#define CFG_FLASH_USE_BUFFER_WRITE	1
+#define CONFIG_SYS_FLASH_EMPTY_INFO
+#define CONFIG_SYS_FLASH_SIZE		0x04000000 /* 64 MByte */
+#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE	1
 
 #if defined (CONFIG_CAM5200)
-# define CFG_ENV_ADDR		(CFG_FLASH_BASE + 0x00040000)
+# define CONFIG_ENV_ADDR		(CONFIG_SYS_FLASH_BASE + 0x00040000)
 #elif defined(CONFIG_TQM5200_B)
-# define CFG_ENV_ADDR		(CFG_FLASH_BASE + 0x00080000)
+# define CONFIG_ENV_ADDR		(CONFIG_SYS_FLASH_BASE + 0x00080000)
 #else
-# define CFG_ENV_ADDR		(CFG_FLASH_BASE + 0x00060000)
+# define CONFIG_ENV_ADDR		(CONFIG_SYS_FLASH_BASE + 0x00060000)
 #endif
 
 /* Dynamic MTD partition support */
@@ -412,7 +412,7 @@
 
 #ifdef CONFIG_STK52XX
 # if defined(CONFIG_TQM5200_B)
-#  if defined(CFG_LOWBOOT)
+#  if defined(CONFIG_SYS_LOWBOOT)
 #   define MTDPARTS_DEFAULT	"mtdparts=TQM5200-0:1m(firmware),"	\
 						"256k(dtb),"		\
 						"2304k(kernel),"	\
@@ -427,7 +427,7 @@
 						"8m(misc),"		\
 						"15m(big-fs),"		\
 						"1m(firmware)"
-#  endif /* CFG_LOWBOOT */
+#  endif /* CONFIG_SYS_LOWBOOT */
 # else	/* !CONFIG_TQM5200_B */
 #   define MTDPARTS_DEFAULT	"mtdparts=TQM5200-0:640k(firmware),"	\
 						"128k(dtb),"		\
@@ -456,52 +456,52 @@
 /*
  * Environment settings
  */
-#define CFG_ENV_IS_IN_FLASH	1
-#define CFG_ENV_SIZE		0x4000	/* 16 k - keep small for fast booting */
+#define CONFIG_ENV_IS_IN_FLASH	1
+#define CONFIG_ENV_SIZE		0x4000	/* 16 k - keep small for fast booting */
 #if defined(CONFIG_TQM5200_B) || defined (CONFIG_CAM5200)
-#define CFG_ENV_SECT_SIZE	0x40000
+#define CONFIG_ENV_SECT_SIZE	0x40000
 #else
-#define CFG_ENV_SECT_SIZE	0x20000
+#define CONFIG_ENV_SECT_SIZE	0x20000
 #endif /* CONFIG_TQM5200_B */
-#define CFG_ENV_ADDR_REDUND	(CFG_ENV_ADDR + CFG_ENV_SECT_SIZE)
-#define CFG_ENV_SIZE_REDUND	(CFG_ENV_SIZE)
+#define CONFIG_ENV_ADDR_REDUND	(CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE)
+#define CONFIG_ENV_SIZE_REDUND	(CONFIG_ENV_SIZE)
 
 /*
  * Memory map
  */
-#define CFG_MBAR		0xF0000000
-#define CFG_SDRAM_BASE		0x00000000
-#define CFG_DEFAULT_MBAR	0x80000000
+#define CONFIG_SYS_MBAR		0xF0000000
+#define CONFIG_SYS_SDRAM_BASE		0x00000000
+#define CONFIG_SYS_DEFAULT_MBAR	0x80000000
 
 /* Use ON-Chip SRAM until RAM will be available */
-#define CFG_INIT_RAM_ADDR	MPC5XXX_SRAM
+#define CONFIG_SYS_INIT_RAM_ADDR	MPC5XXX_SRAM
 #ifdef CONFIG_POST
 /* preserve space for the post_word at end of on-chip SRAM */
-#define CFG_INIT_RAM_END	MPC5XXX_SRAM_POST_SIZE
+#define CONFIG_SYS_INIT_RAM_END	MPC5XXX_SRAM_POST_SIZE
 #else
-#define CFG_INIT_RAM_END	MPC5XXX_SRAM_SIZE
+#define CONFIG_SYS_INIT_RAM_END	MPC5XXX_SRAM_SIZE
 #endif
 
 
-#define CFG_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
-#define CFG_MONITOR_BASE	TEXT_BASE
-#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
-#   define CFG_RAMBOOT		1
+#define CONFIG_SYS_MONITOR_BASE	TEXT_BASE
+#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
+#   define CONFIG_SYS_RAMBOOT		1
 #endif
 
 #if defined (CONFIG_CAM5200)
-# define CFG_MONITOR_LEN	(256 << 10)	/* Reserve 256 kB for Monitor	*/
+# define CONFIG_SYS_MONITOR_LEN	(256 << 10)	/* Reserve 256 kB for Monitor	*/
 #elif defined(CONFIG_TQM5200_B)
-# define CFG_MONITOR_LEN	(512 << 10)	/* Reserve 512 kB for Monitor	*/
+# define CONFIG_SYS_MONITOR_LEN	(512 << 10)	/* Reserve 512 kB for Monitor	*/
 #else
-# define CFG_MONITOR_LEN	(384 << 10)	/* Reserve 384 kB for Monitor	*/
+# define CONFIG_SYS_MONITOR_LEN	(384 << 10)	/* Reserve 384 kB for Monitor	*/
 #endif
 
-#define CFG_MALLOC_LEN		(1024 << 10)	/* Reserve 1024 kB for malloc()	*/
-#define CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
+#define CONFIG_SYS_MALLOC_LEN		(1024 << 10)	/* Reserve 1024 kB for malloc()	*/
+#define CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
 
 /*
  * Ethernet configuration
@@ -555,23 +555,23 @@
  *	 100 -> UART (on all boards).
  */
 #if defined (CONFIG_MINIFAP)
-# define CFG_GPS_PORT_CONFIG	0x91000004
+# define CONFIG_SYS_GPS_PORT_CONFIG	0x91000004
 #elif defined (CONFIG_STK52XX)
 # if defined (CONFIG_STK52XX_REV100)
-#  define CFG_GPS_PORT_CONFIG	0x81500014
+#  define CONFIG_SYS_GPS_PORT_CONFIG	0x81500014
 # else /* STK52xx REV200 and above */
 #  if defined (CONFIG_TQM5200_REV100)
 #   error TQM5200 REV100 not supported on STK52XX REV200 or above
 #  else/* TQM5200 REV200 and above */
-#   define CFG_GPS_PORT_CONFIG	0x91500404
+#   define CONFIG_SYS_GPS_PORT_CONFIG	0x91500404
 #  endif
 # endif
 #elif defined (CONFIG_FO300)
-# define CFG_GPS_PORT_CONFIG	0x91502c24
+# define CONFIG_SYS_GPS_PORT_CONFIG	0x91502c24
 #elif defined (CONFIG_CAM5200)
-# define CFG_GPS_PORT_CONFIG	0x8050A444
+# define CONFIG_SYS_GPS_PORT_CONFIG	0x8050A444
 #else  /* TMQ5200 Inbetriebnahme-Board */
-# define CFG_GPS_PORT_CONFIG	0x81000004
+# define CONFIG_SYS_GPS_PORT_CONFIG	0x81000004
 #endif
 
 /*
@@ -579,8 +579,8 @@
  */
 #if defined (CONFIG_STK52XX) && !defined (CONFIG_STK52XX_REV100)
 # define CONFIG_RTC_M41T11 1
-# define CFG_I2C_RTC_ADDR 0x68
-# define CFG_M41T11_BASE_YEAR	1900    /* because Linux uses the same base
+# define CONFIG_SYS_I2C_RTC_ADDR 0x68
+# define CONFIG_SYS_M41T11_BASE_YEAR	1900    /* because Linux uses the same base
 					   year */
 #else
 # define CONFIG_RTC_MPC5200	1	/* use internal MPC5200 RTC */
@@ -589,36 +589,36 @@
 /*
  * Miscellaneous configurable options
  */
-#define CFG_LONGHELP			/* undef to save memory	    */
-#define CFG_PROMPT		"=> "	/* Monitor Command Prompt   */
+#define CONFIG_SYS_LONGHELP			/* undef to save memory	    */
+#define CONFIG_SYS_PROMPT		"=> "	/* Monitor Command Prompt   */
 
 #define CONFIG_CMDLINE_EDITING	1	/* add command line history	*/
-#define	CFG_HUSH_PARSER		1	/* use "hush" command parser	*/
-#define	CFG_PROMPT_HUSH_PS2	"> "
+#define	CONFIG_SYS_HUSH_PARSER		1	/* use "hush" command parser	*/
+#define	CONFIG_SYS_PROMPT_HUSH_PS2	"> "
 
-#define CFG_CACHELINE_SIZE	32	/* For MPC5xxx CPUs */
+#define CONFIG_SYS_CACHELINE_SIZE	32	/* For MPC5xxx CPUs */
 #if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value */
+#define CONFIG_SYS_CACHELINE_SHIFT	5	/* log base 2 of the above value */
 #endif
 
 #if defined(CONFIG_CMD_KGDB)
-#define CFG_CBSIZE		1024	/* Console I/O Buffer Size  */
+#define CONFIG_SYS_CBSIZE		1024	/* Console I/O Buffer Size  */
 #else
-#define CFG_CBSIZE		256	/* Console I/O Buffer Size  */
+#define CONFIG_SYS_CBSIZE		256	/* Console I/O Buffer Size  */
 #endif
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define CFG_MAXARGS		16	/* max number of command args	*/
-#define CFG_BARGSIZE		CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS		16	/* max number of command args	*/
+#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
 
 /* Enable an alternate, more extensive memory test */
-#define CFG_ALT_MEMTEST
+#define CONFIG_SYS_ALT_MEMTEST
 
-#define CFG_MEMTEST_START	0x00100000	/* memtest works on */
-#define CFG_MEMTEST_END		0x00f00000	/* 1 ... 15 MB in DRAM	*/
+#define CONFIG_SYS_MEMTEST_START	0x00100000	/* memtest works on */
+#define CONFIG_SYS_MEMTEST_END		0x00f00000	/* 1 ... 15 MB in DRAM	*/
 
-#define CFG_LOAD_ADDR		0x100000	/* default load address */
+#define CONFIG_SYS_LOAD_ADDR		0x100000	/* default load address */
 
-#define CFG_HZ			1000	/* decrementer freq: 1 ms ticks */
+#define CONFIG_SYS_HZ			1000	/* decrementer freq: 1 ms ticks */
 
 /*
  * Enable loopw command.
@@ -629,22 +629,22 @@
  * Various low-level settings
  */
 #if defined(CONFIG_MPC5200)
-#define CFG_HID0_INIT		HID0_ICE | HID0_ICFI
-#define CFG_HID0_FINAL		HID0_ICE
+#define CONFIG_SYS_HID0_INIT		HID0_ICE | HID0_ICFI
+#define CONFIG_SYS_HID0_FINAL		HID0_ICE
 #else
-#define CFG_HID0_INIT		0
-#define CFG_HID0_FINAL		0
+#define CONFIG_SYS_HID0_INIT		0
+#define CONFIG_SYS_HID0_FINAL		0
 #endif
 
-#define CFG_BOOTCS_START	CFG_FLASH_BASE
-#define CFG_BOOTCS_SIZE		CFG_FLASH_SIZE
-#ifdef CFG_PCICLK_EQUALS_IPBCLK_DIV2
-#define CFG_BOOTCS_CFG		0x0008DF30 /* for pci_clk  = 66 MHz */
+#define CONFIG_SYS_BOOTCS_START	CONFIG_SYS_FLASH_BASE
+#define CONFIG_SYS_BOOTCS_SIZE		CONFIG_SYS_FLASH_SIZE
+#ifdef CONFIG_SYS_PCICLK_EQUALS_IPBCLK_DIV2
+#define CONFIG_SYS_BOOTCS_CFG		0x0008DF30 /* for pci_clk  = 66 MHz */
 #else
-#define CFG_BOOTCS_CFG		0x0004DF30 /* for pci_clk = 33 MHz */
+#define CONFIG_SYS_BOOTCS_CFG		0x0004DF30 /* for pci_clk = 33 MHz */
 #endif
-#define CFG_CS0_START		CFG_FLASH_BASE
-#define CFG_CS0_SIZE		CFG_FLASH_SIZE
+#define CONFIG_SYS_CS0_START		CONFIG_SYS_FLASH_BASE
+#define CONFIG_SYS_CS0_SIZE		CONFIG_SYS_FLASH_SIZE
 
 #define CONFIG_LAST_STAGE_INIT
 
@@ -652,34 +652,34 @@
  * SRAM - Do not map below 2 GB in address space, because this area is used
  * for SDRAM autosizing.
  */
-#define CFG_CS2_START		0xE5000000
-#define CFG_CS2_SIZE		0x100000	/* 1 MByte */
-#define CFG_CS2_CFG		0x0004D930
+#define CONFIG_SYS_CS2_START		0xE5000000
+#define CONFIG_SYS_CS2_SIZE		0x100000	/* 1 MByte */
+#define CONFIG_SYS_CS2_CFG		0x0004D930
 
 /*
  * Grafic controller - Do not map below 2 GB in address space, because this
  * area is used for SDRAM autosizing.
  */
 #define SM501_FB_BASE		0xE0000000
-#define CFG_CS1_START		(SM501_FB_BASE)
-#define CFG_CS1_SIZE		0x4000000	/* 64 MByte */
-#define CFG_CS1_CFG		0x8F48FF70
-#define SM501_MMIO_BASE		CFG_CS1_START + 0x03E00000
+#define CONFIG_SYS_CS1_START		(SM501_FB_BASE)
+#define CONFIG_SYS_CS1_SIZE		0x4000000	/* 64 MByte */
+#define CONFIG_SYS_CS1_CFG		0x8F48FF70
+#define SM501_MMIO_BASE		CONFIG_SYS_CS1_START + 0x03E00000
 
-#define CFG_CS_BURST		0x00000000
-#define CFG_CS_DEADCYCLE	0x33333311	/* 1 dead cycle for flash and SM501 */
+#define CONFIG_SYS_CS_BURST		0x00000000
+#define CONFIG_SYS_CS_DEADCYCLE	0x33333311	/* 1 dead cycle for flash and SM501 */
 
 #if defined(CONFIG_CAM5200)
-#define CFG_CS4_START		0xB0000000
-#define CFG_CS4_SIZE		0x00010000
-#define CFG_CS4_CFG		0x01019C10
+#define CONFIG_SYS_CS4_START		0xB0000000
+#define CONFIG_SYS_CS4_SIZE		0x00010000
+#define CONFIG_SYS_CS4_CFG		0x01019C10
 
-#define CFG_CS5_START		0xD0000000
-#define CFG_CS5_SIZE		0x01208000
-#define CFG_CS5_CFG		0x1414BF10
+#define CONFIG_SYS_CS5_START		0xD0000000
+#define CONFIG_SYS_CS5_SIZE		0x01208000
+#define CONFIG_SYS_CS5_CFG		0x1414BF10
 #endif
 
-#define CFG_RESET_ADDRESS	0xff000000
+#define CONFIG_SYS_RESET_ADDRESS	0xff000000
 
 /*-----------------------------------------------------------------------
  * USB stuff
@@ -701,24 +701,27 @@
 #define CONFIG_IDE_RESET		/* reset for ide supported	*/
 #define CONFIG_IDE_PREINIT
 
-#define CFG_IDE_MAXBUS		1	/* max. 1 IDE bus		*/
-#define CFG_IDE_MAXDEVICE	2	/* max. 2 drives per IDE bus	*/
+#define CONFIG_SYS_IDE_MAXBUS		1	/* max. 1 IDE bus		*/
+#define CONFIG_SYS_IDE_MAXDEVICE	2	/* max. 2 drives per IDE bus	*/
 
-#define CFG_ATA_IDE0_OFFSET	0x0000
+#define CONFIG_SYS_ATA_IDE0_OFFSET	0x0000
 
-#define CFG_ATA_BASE_ADDR	MPC5XXX_ATA
+#define CONFIG_SYS_ATA_BASE_ADDR	MPC5XXX_ATA
 
 /* Offset for data I/O			*/
-#define CFG_ATA_DATA_OFFSET	(0x0060)
+#define CONFIG_SYS_ATA_DATA_OFFSET	(0x0060)
 
 /* Offset for normal register accesses	*/
-#define CFG_ATA_REG_OFFSET	(CFG_ATA_DATA_OFFSET)
+#define CONFIG_SYS_ATA_REG_OFFSET	(CONFIG_SYS_ATA_DATA_OFFSET)
 
 /* Offset for alternate registers	*/
-#define CFG_ATA_ALT_OFFSET	(0x005C)
+#define CONFIG_SYS_ATA_ALT_OFFSET	(0x005C)
 
 /* Interval between registers						     */
-#define CFG_ATA_STRIDE		4
+#define CONFIG_SYS_ATA_STRIDE		4
+
+/* Support ATAPI devices */
+#define CONFIG_ATAPI            1
 
 /*-----------------------------------------------------------------------
  * Open firmware flat tree support
diff --git a/include/configs/TQM823L.h b/include/configs/TQM823L.h
index 839b6be91..223269ff0 100644
--- a/include/configs/TQM823L.h
+++ b/include/configs/TQM823L.h
@@ -86,7 +86,7 @@
 #define CONFIG_BOOTCOMMAND	"run flash_self"
 
 #define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
-#undef	CFG_LOADS_BAUD_CHANGE		/* don't allow baudrate change	*/
+#undef	CONFIG_SYS_LOADS_BAUD_CHANGE		/* don't allow baudrate change	*/
 
 #undef	CONFIG_WATCHDOG			/* watchdog disabled		*/
 
@@ -138,32 +138,32 @@
 /*
  * Miscellaneous configurable options
  */
-#define	CFG_LONGHELP			/* undef to save memory		*/
-#define	CFG_PROMPT		"=> "	/* Monitor Command Prompt	*/
+#define	CONFIG_SYS_LONGHELP			/* undef to save memory		*/
+#define	CONFIG_SYS_PROMPT		"=> "	/* Monitor Command Prompt	*/
 
 #define CONFIG_CMDLINE_EDITING	1	/* add command line history	*/
-#define CFG_HUSH_PARSER		1	/* Use the HUSH parser		*/
-#ifdef	CFG_HUSH_PARSER
-#define	CFG_PROMPT_HUSH_PS2	"> "
+#define CONFIG_SYS_HUSH_PARSER		1	/* Use the HUSH parser		*/
+#ifdef	CONFIG_SYS_HUSH_PARSER
+#define	CONFIG_SYS_PROMPT_HUSH_PS2	"> "
 #endif
 
 #if defined(CONFIG_CMD_KGDB)
-#define	CFG_CBSIZE		1024	/* Console I/O Buffer Size	*/
+#define	CONFIG_SYS_CBSIZE		1024	/* Console I/O Buffer Size	*/
 #else
-#define	CFG_CBSIZE		256	/* Console I/O Buffer Size	*/
+#define	CONFIG_SYS_CBSIZE		256	/* Console I/O Buffer Size	*/
 #endif
-#define	CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define	CFG_MAXARGS		16	/* max number of command args	*/
-#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+#define	CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define	CONFIG_SYS_MAXARGS		16	/* max number of command args	*/
+#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
 
-#define CFG_MEMTEST_START	0x0400000	/* memtest works on	*/
-#define CFG_MEMTEST_END		0x0C00000	/* 4 ... 12 MB in DRAM	*/
+#define CONFIG_SYS_MEMTEST_START	0x0400000	/* memtest works on	*/
+#define CONFIG_SYS_MEMTEST_END		0x0C00000	/* 4 ... 12 MB in DRAM	*/
 
-#define	CFG_LOAD_ADDR		0x100000	/* default load address	*/
+#define	CONFIG_SYS_LOAD_ADDR		0x100000	/* default load address	*/
 
-#define	CFG_HZ			1000	/* decrementer freq: 1 ms ticks	*/
+#define	CONFIG_SYS_HZ			1000	/* decrementer freq: 1 ms ticks	*/
 
-#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
 
 /*
  * Low Level Configuration Settings
@@ -173,57 +173,59 @@
 /*-----------------------------------------------------------------------
  * Internal Memory Mapped Register
  */
-#define CFG_IMMR		0xFFF00000
+#define CONFIG_SYS_IMMR		0xFFF00000
 
 /*-----------------------------------------------------------------------
  * Definitions for initial stack pointer and data area (in DPRAM)
  */
-#define CFG_INIT_RAM_ADDR	CFG_IMMR
-#define	CFG_INIT_RAM_END	0x2F00	/* End of used area in DPRAM	*/
-#define	CFG_GBL_DATA_SIZE	64  /* size in bytes reserved for initial data */
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define	CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_IMMR
+#define	CONFIG_SYS_INIT_RAM_END	0x2F00	/* End of used area in DPRAM	*/
+#define	CONFIG_SYS_GBL_DATA_SIZE	64  /* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define	CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
 /*-----------------------------------------------------------------------
  * Start addresses for the final memory configuration
  * (Set up by the startup code)
- * Please note that CFG_SDRAM_BASE _must_ start at 0
+ * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
  */
-#define	CFG_SDRAM_BASE		0x00000000
-#define CFG_FLASH_BASE		0x40000000
-#define	CFG_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor	*/
-#define CFG_MONITOR_BASE	CFG_FLASH_BASE
-#define	CFG_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/
+#define	CONFIG_SYS_SDRAM_BASE		0x00000000
+#define CONFIG_SYS_FLASH_BASE		0x40000000
+#define	CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor	*/
+#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_FLASH_BASE
+#define	CONFIG_SYS_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/
 
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define	CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux	*/
+#define	CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux	*/
 
 /*-----------------------------------------------------------------------
  * FLASH organization
  */
 
 /* use CFI flash driver */
-#define CFG_FLASH_CFI		1	/* Flash is CFI conformant */
+#define CONFIG_SYS_FLASH_CFI		1	/* Flash is CFI conformant */
 #define CONFIG_FLASH_CFI_DRIVER	1	/* Use the common driver */
-#define CFG_FLASH_BANKS_LIST	{ CFG_FLASH_BASE, CFG_FLASH_BASE+flash_info[0].size }
-#define CFG_FLASH_EMPTY_INFO
-#define CFG_FLASH_USE_BUFFER_WRITE	1
-#define CFG_MAX_FLASH_BANKS	2	/* max number of memory banks */
-#define CFG_MAX_FLASH_SECT	71	/* max number of sectors on one chip */
+#define CONFIG_SYS_FLASH_BANKS_LIST	{ CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE+flash_info[0].size }
+#define CONFIG_SYS_FLASH_EMPTY_INFO
+#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE	1
+#define CONFIG_SYS_MAX_FLASH_BANKS	2	/* max number of memory banks */
+#define CONFIG_SYS_MAX_FLASH_SECT	71	/* max number of sectors on one chip */
 
-#define	CFG_ENV_IS_IN_FLASH	1
-#define	CFG_ENV_OFFSET		0x8000	/*   Offset   of Environment Sector	*/
-#define	CFG_ENV_SIZE		0x4000	/* Total Size of Environment Sector	*/
+#define	CONFIG_ENV_IS_IN_FLASH	1
+#define	CONFIG_ENV_OFFSET		0x8000	/*   Offset   of Environment Sector	*/
+#define	CONFIG_ENV_SIZE		0x4000	/* Total Size of Environment Sector	*/
 
 /* Address and size of Redundant Environment Sector	*/
-#define CFG_ENV_OFFSET_REDUND	(CFG_ENV_OFFSET+CFG_ENV_SIZE)
-#define CFG_ENV_SIZE_REDUND	(CFG_ENV_SIZE)
+#define CONFIG_ENV_OFFSET_REDUND	(CONFIG_ENV_OFFSET+CONFIG_ENV_SIZE)
+#define CONFIG_ENV_SIZE_REDUND	(CONFIG_ENV_SIZE)
 
-#define	CFG_USE_PPCENV			/* Environment embedded in sect .ppcenv */
+#define	CONFIG_SYS_USE_PPCENV			/* Environment embedded in sect .ppcenv */
+
+#define CONFIG_MISC_INIT_R		/* Make sure to remap flashes correctly */
 
 /*-----------------------------------------------------------------------
  * Dynamic MTD partition support
@@ -240,16 +242,16 @@
 /*-----------------------------------------------------------------------
  * Hardware Information Block
  */
-#define CFG_HWINFO_OFFSET	0x0003FFC0	/* offset of HW Info block */
-#define CFG_HWINFO_SIZE		0x00000040	/* size   of HW Info block */
-#define CFG_HWINFO_MAGIC	0x54514D38	/* 'TQM8' */
+#define CONFIG_SYS_HWINFO_OFFSET	0x0003FFC0	/* offset of HW Info block */
+#define CONFIG_SYS_HWINFO_SIZE		0x00000040	/* size   of HW Info block */
+#define CONFIG_SYS_HWINFO_MAGIC	0x54514D38	/* 'TQM8' */
 
 /*-----------------------------------------------------------------------
  * Cache Configuration
  */
-#define CFG_CACHELINE_SIZE	16	/* For all MPC8xx CPUs			*/
+#define CONFIG_SYS_CACHELINE_SIZE	16	/* For all MPC8xx CPUs			*/
 #if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT	4	/* log base 2 of the above value	*/
+#define CONFIG_SYS_CACHELINE_SHIFT	4	/* log base 2 of the above value	*/
 #endif
 
 /*-----------------------------------------------------------------------
@@ -259,10 +261,10 @@
  * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze
  */
 #if defined(CONFIG_WATCHDOG)
-#define CFG_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
+#define CONFIG_SYS_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
 			 SYPCR_SWE  | SYPCR_SWRI| SYPCR_SWP)
 #else
-#define CFG_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
+#define CONFIG_SYS_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
 #endif
 
 /*-----------------------------------------------------------------------
@@ -271,9 +273,9 @@
  * PCMCIA config., multi-function pin tri-state
  */
 #ifndef	CONFIG_CAN_DRIVER
-#define CFG_SIUMCR	(SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_MLRC01)
+#define CONFIG_SYS_SIUMCR	(SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_MLRC01)
 #else	/* we must activate GPL5 in the SIUMCR for CAN */
-#define CFG_SIUMCR	(SIUMCR_DBGC11 | SIUMCR_DBPC00 | SIUMCR_MLRC01)
+#define CONFIG_SYS_SIUMCR	(SIUMCR_DBGC11 | SIUMCR_DBPC00 | SIUMCR_MLRC01)
 #endif	/* CONFIG_CAN_DRIVER */
 
 /*-----------------------------------------------------------------------
@@ -281,20 +283,20 @@
  *-----------------------------------------------------------------------
  * Clear Reference Interrupt Status, Timebase freezing enabled
  */
-#define CFG_TBSCR	(TBSCR_REFA | TBSCR_REFB | TBSCR_TBF)
+#define CONFIG_SYS_TBSCR	(TBSCR_REFA | TBSCR_REFB | TBSCR_TBF)
 
 /*-----------------------------------------------------------------------
  * RTCSC - Real-Time Clock Status and Control Register		11-27
  *-----------------------------------------------------------------------
  */
-#define CFG_RTCSC	(RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE)
+#define CONFIG_SYS_RTCSC	(RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE)
 
 /*-----------------------------------------------------------------------
  * PISCR - Periodic Interrupt Status and Control		11-31
  *-----------------------------------------------------------------------
  * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
  */
-#define CFG_PISCR	(PISCR_PS | PISCR_PITF)
+#define CONFIG_SYS_PISCR	(PISCR_PS | PISCR_PITF)
 
 /*-----------------------------------------------------------------------
  * PLPRCR - PLL, Low-Power, and Reset Control Register		15-30
@@ -302,7 +304,7 @@
  * Reset PLL lock status sticky bit, timer expired status bit and timer
  * interrupt status bit
  */
-#define CFG_PLPRCR	(PLPRCR_SPLSS | PLPRCR_TEXPS | PLPRCR_TMIST)
+#define CONFIG_SYS_PLPRCR	(PLPRCR_SPLSS | PLPRCR_TEXPS | PLPRCR_TMIST)
 
 /*-----------------------------------------------------------------------
  * SCCR - System Clock and reset Control Register		15-27
@@ -311,7 +313,7 @@
  * power management and some other internal clocks
  */
 #define SCCR_MASK	SCCR_EBDF11
-#define CFG_SCCR	(SCCR_COM00   | SCCR_DFSYNC00 | SCCR_DFBRG00  | \
+#define CONFIG_SYS_SCCR	(SCCR_COM00   | SCCR_DFSYNC00 | SCCR_DFBRG00  | \
 			 SCCR_DFNL000 | SCCR_DFNH000  | SCCR_DFLCD000 | \
 			 SCCR_DFALCD00)
 
@@ -320,14 +322,14 @@
  *-----------------------------------------------------------------------
  *
  */
-#define CFG_PCMCIA_MEM_ADDR	(0xE0000000)
-#define CFG_PCMCIA_MEM_SIZE	( 64 << 20 )
-#define CFG_PCMCIA_DMA_ADDR	(0xE4000000)
-#define CFG_PCMCIA_DMA_SIZE	( 64 << 20 )
-#define CFG_PCMCIA_ATTRB_ADDR	(0xE8000000)
-#define CFG_PCMCIA_ATTRB_SIZE	( 64 << 20 )
-#define CFG_PCMCIA_IO_ADDR	(0xEC000000)
-#define CFG_PCMCIA_IO_SIZE	( 64 << 20 )
+#define CONFIG_SYS_PCMCIA_MEM_ADDR	(0xE0000000)
+#define CONFIG_SYS_PCMCIA_MEM_SIZE	( 64 << 20 )
+#define CONFIG_SYS_PCMCIA_DMA_ADDR	(0xE4000000)
+#define CONFIG_SYS_PCMCIA_DMA_SIZE	( 64 << 20 )
+#define CONFIG_SYS_PCMCIA_ATTRB_ADDR	(0xE8000000)
+#define CONFIG_SYS_PCMCIA_ATTRB_SIZE	( 64 << 20 )
+#define CONFIG_SYS_PCMCIA_IO_ADDR	(0xEC000000)
+#define CONFIG_SYS_PCMCIA_IO_SIZE	( 64 << 20 )
 
 /*-----------------------------------------------------------------------
  * IDE/ATA stuff (Supports IDE harddisk on PCMCIA Adapter)
@@ -340,28 +342,28 @@
 #undef	CONFIG_IDE_LED			/* LED   for ide not supported	*/
 #undef	CONFIG_IDE_RESET		/* reset for ide not supported	*/
 
-#define CFG_IDE_MAXBUS		1	/* max. 1 IDE bus		*/
-#define CFG_IDE_MAXDEVICE	1	/* max. 1 drive per IDE bus	*/
+#define CONFIG_SYS_IDE_MAXBUS		1	/* max. 1 IDE bus		*/
+#define CONFIG_SYS_IDE_MAXDEVICE	1	/* max. 1 drive per IDE bus	*/
 
-#define CFG_ATA_IDE0_OFFSET	0x0000
+#define CONFIG_SYS_ATA_IDE0_OFFSET	0x0000
 
-#define CFG_ATA_BASE_ADDR	CFG_PCMCIA_MEM_ADDR
+#define CONFIG_SYS_ATA_BASE_ADDR	CONFIG_SYS_PCMCIA_MEM_ADDR
 
 /* Offset for data I/O			*/
-#define CFG_ATA_DATA_OFFSET	(CFG_PCMCIA_MEM_SIZE + 0x320)
+#define CONFIG_SYS_ATA_DATA_OFFSET	(CONFIG_SYS_PCMCIA_MEM_SIZE + 0x320)
 
 /* Offset for normal register accesses	*/
-#define CFG_ATA_REG_OFFSET	(2 * CFG_PCMCIA_MEM_SIZE + 0x320)
+#define CONFIG_SYS_ATA_REG_OFFSET	(2 * CONFIG_SYS_PCMCIA_MEM_SIZE + 0x320)
 
 /* Offset for alternate registers	*/
-#define CFG_ATA_ALT_OFFSET	0x0100
+#define CONFIG_SYS_ATA_ALT_OFFSET	0x0100
 
 /*-----------------------------------------------------------------------
  *
  *-----------------------------------------------------------------------
  *
  */
-#define CFG_DER	0
+#define CONFIG_SYS_DER	0
 
 /*
  * Init Memory Controller:
@@ -376,22 +378,22 @@
  * restrict access enough to keep SRAM working (if any)
  * but not too much to meddle with FLASH accesses
  */
-#define CFG_REMAP_OR_AM		0x80000000	/* OR addr mask */
-#define CFG_PRELIM_OR_AM	0xE0000000	/* OR addr mask */
+#define CONFIG_SYS_REMAP_OR_AM		0x80000000	/* OR addr mask */
+#define CONFIG_SYS_PRELIM_OR_AM	0xE0000000	/* OR addr mask */
 
 /*
  * FLASH timing:
  */
-#define CFG_OR_TIMING_FLASH	(OR_ACS_DIV1  | OR_TRLX | OR_CSNT_SAM | \
+#define CONFIG_SYS_OR_TIMING_FLASH	(OR_ACS_DIV1  | OR_TRLX | OR_CSNT_SAM | \
 				 OR_SCY_3_CLK | OR_EHTR | OR_BI)
 
-#define CFG_OR0_REMAP	(CFG_REMAP_OR_AM  | CFG_OR_TIMING_FLASH)
-#define CFG_OR0_PRELIM	(CFG_PRELIM_OR_AM | CFG_OR_TIMING_FLASH)
-#define CFG_BR0_PRELIM	((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_V )
+#define CONFIG_SYS_OR0_REMAP	(CONFIG_SYS_REMAP_OR_AM  | CONFIG_SYS_OR_TIMING_FLASH)
+#define CONFIG_SYS_OR0_PRELIM	(CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_FLASH)
+#define CONFIG_SYS_BR0_PRELIM	((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_V )
 
-#define CFG_OR1_REMAP	CFG_OR0_REMAP
-#define CFG_OR1_PRELIM	CFG_OR0_PRELIM
-#define CFG_BR1_PRELIM	((FLASH_BASE1_PRELIM & BR_BA_MSK) | BR_V )
+#define CONFIG_SYS_OR1_REMAP	CONFIG_SYS_OR0_REMAP
+#define CONFIG_SYS_OR1_PRELIM	CONFIG_SYS_OR0_PRELIM
+#define CONFIG_SYS_BR1_PRELIM	((FLASH_BASE1_PRELIM & BR_BA_MSK) | BR_V )
 
 /*
  * BR2/3 and OR2/3 (SDRAM)
@@ -402,19 +404,19 @@
 #define	SDRAM_MAX_SIZE		0x04000000	/* max 64 MB per bank	*/
 
 /* SDRAM timing: Multiplexed addresses, GPL5 output to GPL5_A (don't care)	*/
-#define CFG_OR_TIMING_SDRAM	0x00000A00
+#define CONFIG_SYS_OR_TIMING_SDRAM	0x00000A00
 
-#define CFG_OR2_PRELIM	(CFG_PRELIM_OR_AM | CFG_OR_TIMING_SDRAM )
-#define CFG_BR2_PRELIM	((SDRAM_BASE2_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
+#define CONFIG_SYS_OR2_PRELIM	(CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_SDRAM )
+#define CONFIG_SYS_BR2_PRELIM	((SDRAM_BASE2_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
 
 #ifndef	CONFIG_CAN_DRIVER
-#define	CFG_OR3_PRELIM	CFG_OR2_PRELIM
-#define CFG_BR3_PRELIM	((SDRAM_BASE3_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
+#define	CONFIG_SYS_OR3_PRELIM	CONFIG_SYS_OR2_PRELIM
+#define CONFIG_SYS_BR3_PRELIM	((SDRAM_BASE3_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
 #else	/* CAN uses CS3#, so we can have only one SDRAM bank anyway */
-#define	CFG_CAN_BASE		0xC0000000	/* CAN mapped at 0xC0000000	*/
-#define CFG_CAN_OR_AM		0xFFFF8000	/* 32 kB address mask		*/
-#define CFG_OR3_CAN		(CFG_CAN_OR_AM | OR_G5LA | OR_BI)
-#define CFG_BR3_CAN		((CFG_CAN_BASE & BR_BA_MSK) | \
+#define	CONFIG_SYS_CAN_BASE		0xC0000000	/* CAN mapped at 0xC0000000	*/
+#define CONFIG_SYS_CAN_OR_AM		0xFFFF8000	/* 32 kB address mask		*/
+#define CONFIG_SYS_OR3_CAN		(CONFIG_SYS_CAN_OR_AM | OR_G5LA | OR_BI)
+#define CONFIG_SYS_BR3_CAN		((CONFIG_SYS_CAN_BASE & BR_BA_MSK) | \
 					BR_PS_8 | BR_MS_UPMB | BR_V )
 #endif	/* CONFIG_CAN_DRIVER */
 
@@ -445,34 +447,34 @@
  * 80 Mhz => 80.000.000 / Divider = 156
  */
 
-#define CFG_PTA_PER_CLK	((4096 * 32 * 1000) / (4 * 64))
-#define CFG_MAMR_PTA	98
+#define CONFIG_SYS_PTA_PER_CLK	((4096 * 32 * 1000) / (4 * 64))
+#define CONFIG_SYS_MAMR_PTA	98
 
 /*
  * For 16 MBit, refresh rates could be 31.3 us
  * (= 64 ms / 2K = 125 / quad bursts).
  * For a simpler initialization, 15.6 us is used instead.
  *
- * #define CFG_MPTPR_2BK_2K	MPTPR_PTP_DIV32		for 2 banks
- * #define CFG_MPTPR_1BK_2K	MPTPR_PTP_DIV64		for 1 bank
+ * #define CONFIG_SYS_MPTPR_2BK_2K	MPTPR_PTP_DIV32		for 2 banks
+ * #define CONFIG_SYS_MPTPR_1BK_2K	MPTPR_PTP_DIV64		for 1 bank
  */
-#define CFG_MPTPR_2BK_4K	MPTPR_PTP_DIV16		/* setting for 2 banks	*/
-#define CFG_MPTPR_1BK_4K	MPTPR_PTP_DIV32		/* setting for 1 bank	*/
+#define CONFIG_SYS_MPTPR_2BK_4K	MPTPR_PTP_DIV16		/* setting for 2 banks	*/
+#define CONFIG_SYS_MPTPR_1BK_4K	MPTPR_PTP_DIV32		/* setting for 1 bank	*/
 
 /* refresh rate 7.8 us (= 64 ms / 8K = 31.2 / quad bursts) for 256 MBit		*/
-#define CFG_MPTPR_2BK_8K	MPTPR_PTP_DIV8		/* setting for 2 banks	*/
-#define CFG_MPTPR_1BK_8K	MPTPR_PTP_DIV16		/* setting for 1 bank	*/
+#define CONFIG_SYS_MPTPR_2BK_8K	MPTPR_PTP_DIV8		/* setting for 2 banks	*/
+#define CONFIG_SYS_MPTPR_1BK_8K	MPTPR_PTP_DIV16		/* setting for 1 bank	*/
 
 /*
  * MAMR settings for SDRAM
  */
 
 /* 8 column SDRAM */
-#define CFG_MAMR_8COL	((CFG_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
+#define CONFIG_SYS_MAMR_8COL	((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
 			 MAMR_AMA_TYPE_0 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A11 |	\
 			 MAMR_RLFA_1X	 | MAMR_WLFA_1X	   | MAMR_TLFA_4X)
 /* 9 column SDRAM */
-#define CFG_MAMR_9COL	((CFG_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
+#define CONFIG_SYS_MAMR_9COL	((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
 			 MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 |	\
 			 MAMR_RLFA_1X	 | MAMR_WLFA_1X	   | MAMR_TLFA_4X)
 
diff --git a/include/configs/TQM823M.h b/include/configs/TQM823M.h
index b9a7a59c2..aed5d5bab 100644
--- a/include/configs/TQM823M.h
+++ b/include/configs/TQM823M.h
@@ -84,7 +84,7 @@
 #define CONFIG_BOOTCOMMAND	"run flash_self"
 
 #define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
-#undef	CFG_LOADS_BAUD_CHANGE		/* don't allow baudrate change	*/
+#undef	CONFIG_SYS_LOADS_BAUD_CHANGE		/* don't allow baudrate change	*/
 
 #undef	CONFIG_WATCHDOG			/* watchdog disabled		*/
 
@@ -133,32 +133,32 @@
 /*
  * Miscellaneous configurable options
  */
-#define	CFG_LONGHELP			/* undef to save memory		*/
-#define	CFG_PROMPT		"=> "	/* Monitor Command Prompt	*/
+#define	CONFIG_SYS_LONGHELP			/* undef to save memory		*/
+#define	CONFIG_SYS_PROMPT		"=> "	/* Monitor Command Prompt	*/
 
 #define CONFIG_CMDLINE_EDITING	1	/* add command line history	*/
-#define CFG_HUSH_PARSER		1	/* Use the HUSH parser		*/
-#ifdef	CFG_HUSH_PARSER
-#define	CFG_PROMPT_HUSH_PS2	"> "
+#define CONFIG_SYS_HUSH_PARSER		1	/* Use the HUSH parser		*/
+#ifdef	CONFIG_SYS_HUSH_PARSER
+#define	CONFIG_SYS_PROMPT_HUSH_PS2	"> "
 #endif
 
 #if defined(CONFIG_CMD_KGDB)
-#define	CFG_CBSIZE		1024	/* Console I/O Buffer Size	*/
+#define	CONFIG_SYS_CBSIZE		1024	/* Console I/O Buffer Size	*/
 #else
-#define	CFG_CBSIZE		256	/* Console I/O Buffer Size	*/
+#define	CONFIG_SYS_CBSIZE		256	/* Console I/O Buffer Size	*/
 #endif
-#define	CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define	CFG_MAXARGS		16	/* max number of command args	*/
-#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+#define	CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define	CONFIG_SYS_MAXARGS		16	/* max number of command args	*/
+#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
 
-#define CFG_MEMTEST_START	0x0400000	/* memtest works on	*/
-#define CFG_MEMTEST_END		0x0C00000	/* 4 ... 12 MB in DRAM	*/
+#define CONFIG_SYS_MEMTEST_START	0x0400000	/* memtest works on	*/
+#define CONFIG_SYS_MEMTEST_END		0x0C00000	/* 4 ... 12 MB in DRAM	*/
 
-#define	CFG_LOAD_ADDR		0x100000	/* default load address	*/
+#define	CONFIG_SYS_LOAD_ADDR		0x100000	/* default load address	*/
 
-#define	CFG_HZ			1000	/* decrementer freq: 1 ms ticks	*/
+#define	CONFIG_SYS_HZ			1000	/* decrementer freq: 1 ms ticks	*/
 
-#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
 
 /*
  * Low Level Configuration Settings
@@ -168,58 +168,60 @@
 /*-----------------------------------------------------------------------
  * Internal Memory Mapped Register
  */
-#define CFG_IMMR		0xFFF00000
+#define CONFIG_SYS_IMMR		0xFFF00000
 
 /*-----------------------------------------------------------------------
  * Definitions for initial stack pointer and data area (in DPRAM)
  */
-#define CFG_INIT_RAM_ADDR	CFG_IMMR
-#define	CFG_INIT_RAM_END	0x2F00	/* End of used area in DPRAM	*/
-#define	CFG_GBL_DATA_SIZE	64  /* size in bytes reserved for initial data */
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define	CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_IMMR
+#define	CONFIG_SYS_INIT_RAM_END	0x2F00	/* End of used area in DPRAM	*/
+#define	CONFIG_SYS_GBL_DATA_SIZE	64  /* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define	CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
 /*-----------------------------------------------------------------------
  * Start addresses for the final memory configuration
  * (Set up by the startup code)
- * Please note that CFG_SDRAM_BASE _must_ start at 0
+ * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
  */
-#define	CFG_SDRAM_BASE		0x00000000
-#define CFG_FLASH_BASE		0x40000000
-#define	CFG_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor	*/
-#define CFG_MONITOR_BASE	CFG_FLASH_BASE
-#define	CFG_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/
+#define	CONFIG_SYS_SDRAM_BASE		0x00000000
+#define CONFIG_SYS_FLASH_BASE		0x40000000
+#define	CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor	*/
+#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_FLASH_BASE
+#define	CONFIG_SYS_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/
 
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define	CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux	*/
+#define	CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux	*/
 
 /*-----------------------------------------------------------------------
  * FLASH organization
  */
 
 /* use CFI flash driver */
-#define CFG_FLASH_CFI		1	/* Flash is CFI conformant */
+#define CONFIG_SYS_FLASH_CFI		1	/* Flash is CFI conformant */
 #define CONFIG_FLASH_CFI_DRIVER	1	/* Use the common driver */
-#define CFG_FLASH_BANKS_LIST	{ CFG_FLASH_BASE }
-#define CFG_FLASH_EMPTY_INFO
-#define CFG_FLASH_USE_BUFFER_WRITE	1
-#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks */
-#define CFG_MAX_FLASH_SECT	256	/* max number of sectors on one chip */
+#define CONFIG_SYS_FLASH_BANKS_LIST	{ CONFIG_SYS_FLASH_BASE }
+#define CONFIG_SYS_FLASH_EMPTY_INFO
+#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE	1
+#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks */
+#define CONFIG_SYS_MAX_FLASH_SECT	256	/* max number of sectors on one chip */
 
-#define	CFG_ENV_IS_IN_FLASH	1
-#define	CFG_ENV_OFFSET		0x40000	/*   Offset   of Environment Sector	*/
-#define	CFG_ENV_SIZE		0x08000	/* Total Size of Environment		*/
-#define	CFG_ENV_SECT_SIZE	0x20000	/* Total Size of Environment Sector	*/
+#define	CONFIG_ENV_IS_IN_FLASH	1
+#define	CONFIG_ENV_OFFSET		0x40000	/*   Offset   of Environment Sector	*/
+#define	CONFIG_ENV_SIZE		0x08000	/* Total Size of Environment		*/
+#define	CONFIG_ENV_SECT_SIZE	0x20000	/* Total Size of Environment Sector	*/
 
 /* Address and size of Redundant Environment Sector	*/
-#define CFG_ENV_OFFSET_REDUND	(CFG_ENV_OFFSET+CFG_ENV_SECT_SIZE)
-#define CFG_ENV_SIZE_REDUND	(CFG_ENV_SIZE)
+#define CONFIG_ENV_OFFSET_REDUND	(CONFIG_ENV_OFFSET+CONFIG_ENV_SECT_SIZE)
+#define CONFIG_ENV_SIZE_REDUND	(CONFIG_ENV_SIZE)
 
-#define	CFG_USE_PPCENV			/* Environment embedded in sect .ppcenv */
+#define	CONFIG_SYS_USE_PPCENV			/* Environment embedded in sect .ppcenv */
+
+#define CONFIG_MISC_INIT_R		/* Make sure to remap flashes correctly */
 
 /*-----------------------------------------------------------------------
  * Dynamic MTD partition support
@@ -236,16 +238,16 @@
 /*-----------------------------------------------------------------------
  * Hardware Information Block
  */
-#define CFG_HWINFO_OFFSET	0x0003FFC0	/* offset of HW Info block */
-#define CFG_HWINFO_SIZE		0x00000040	/* size   of HW Info block */
-#define CFG_HWINFO_MAGIC	0x54514D38	/* 'TQM8' */
+#define CONFIG_SYS_HWINFO_OFFSET	0x0003FFC0	/* offset of HW Info block */
+#define CONFIG_SYS_HWINFO_SIZE		0x00000040	/* size   of HW Info block */
+#define CONFIG_SYS_HWINFO_MAGIC	0x54514D38	/* 'TQM8' */
 
 /*-----------------------------------------------------------------------
  * Cache Configuration
  */
-#define CFG_CACHELINE_SIZE	16	/* For all MPC8xx CPUs			*/
+#define CONFIG_SYS_CACHELINE_SIZE	16	/* For all MPC8xx CPUs			*/
 #if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT	4	/* log base 2 of the above value	*/
+#define CONFIG_SYS_CACHELINE_SHIFT	4	/* log base 2 of the above value	*/
 #endif
 
 /*-----------------------------------------------------------------------
@@ -255,10 +257,10 @@
  * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze
  */
 #if defined(CONFIG_WATCHDOG)
-#define CFG_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
+#define CONFIG_SYS_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
 			 SYPCR_SWE  | SYPCR_SWRI| SYPCR_SWP)
 #else
-#define CFG_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
+#define CONFIG_SYS_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
 #endif
 
 /*-----------------------------------------------------------------------
@@ -267,9 +269,9 @@
  * PCMCIA config., multi-function pin tri-state
  */
 #ifndef	CONFIG_CAN_DRIVER
-#define CFG_SIUMCR	(SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_MLRC01)
+#define CONFIG_SYS_SIUMCR	(SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_MLRC01)
 #else	/* we must activate GPL5 in the SIUMCR for CAN */
-#define CFG_SIUMCR	(SIUMCR_DBGC11 | SIUMCR_DBPC00 | SIUMCR_MLRC01)
+#define CONFIG_SYS_SIUMCR	(SIUMCR_DBGC11 | SIUMCR_DBPC00 | SIUMCR_MLRC01)
 #endif	/* CONFIG_CAN_DRIVER */
 
 /*-----------------------------------------------------------------------
@@ -277,20 +279,20 @@
  *-----------------------------------------------------------------------
  * Clear Reference Interrupt Status, Timebase freezing enabled
  */
-#define CFG_TBSCR	(TBSCR_REFA | TBSCR_REFB | TBSCR_TBF)
+#define CONFIG_SYS_TBSCR	(TBSCR_REFA | TBSCR_REFB | TBSCR_TBF)
 
 /*-----------------------------------------------------------------------
  * RTCSC - Real-Time Clock Status and Control Register		11-27
  *-----------------------------------------------------------------------
  */
-#define CFG_RTCSC	(RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE)
+#define CONFIG_SYS_RTCSC	(RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE)
 
 /*-----------------------------------------------------------------------
  * PISCR - Periodic Interrupt Status and Control		11-31
  *-----------------------------------------------------------------------
  * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
  */
-#define CFG_PISCR	(PISCR_PS | PISCR_PITF)
+#define CONFIG_SYS_PISCR	(PISCR_PS | PISCR_PITF)
 
 /*-----------------------------------------------------------------------
  * PLPRCR - PLL, Low-Power, and Reset Control Register		15-30
@@ -298,7 +300,7 @@
  * Reset PLL lock status sticky bit, timer expired status bit and timer
  * interrupt status bit
  */
-#define CFG_PLPRCR	(PLPRCR_SPLSS | PLPRCR_TEXPS | PLPRCR_TMIST)
+#define CONFIG_SYS_PLPRCR	(PLPRCR_SPLSS | PLPRCR_TEXPS | PLPRCR_TMIST)
 
 /*-----------------------------------------------------------------------
  * SCCR - System Clock and reset Control Register		15-27
@@ -307,7 +309,7 @@
  * power management and some other internal clocks
  */
 #define SCCR_MASK	SCCR_EBDF11
-#define CFG_SCCR	(SCCR_COM00   | SCCR_DFSYNC00 | SCCR_DFBRG00  | \
+#define CONFIG_SYS_SCCR	(SCCR_COM00   | SCCR_DFSYNC00 | SCCR_DFBRG00  | \
 			 SCCR_DFNL000 | SCCR_DFNH000  | SCCR_DFLCD000 | \
 			 SCCR_DFALCD00)
 
@@ -316,14 +318,14 @@
  *-----------------------------------------------------------------------
  *
  */
-#define CFG_PCMCIA_MEM_ADDR	(0xE0000000)
-#define CFG_PCMCIA_MEM_SIZE	( 64 << 20 )
-#define CFG_PCMCIA_DMA_ADDR	(0xE4000000)
-#define CFG_PCMCIA_DMA_SIZE	( 64 << 20 )
-#define CFG_PCMCIA_ATTRB_ADDR	(0xE8000000)
-#define CFG_PCMCIA_ATTRB_SIZE	( 64 << 20 )
-#define CFG_PCMCIA_IO_ADDR	(0xEC000000)
-#define CFG_PCMCIA_IO_SIZE	( 64 << 20 )
+#define CONFIG_SYS_PCMCIA_MEM_ADDR	(0xE0000000)
+#define CONFIG_SYS_PCMCIA_MEM_SIZE	( 64 << 20 )
+#define CONFIG_SYS_PCMCIA_DMA_ADDR	(0xE4000000)
+#define CONFIG_SYS_PCMCIA_DMA_SIZE	( 64 << 20 )
+#define CONFIG_SYS_PCMCIA_ATTRB_ADDR	(0xE8000000)
+#define CONFIG_SYS_PCMCIA_ATTRB_SIZE	( 64 << 20 )
+#define CONFIG_SYS_PCMCIA_IO_ADDR	(0xEC000000)
+#define CONFIG_SYS_PCMCIA_IO_SIZE	( 64 << 20 )
 
 /*-----------------------------------------------------------------------
  * IDE/ATA stuff (Supports IDE harddisk on PCMCIA Adapter)
@@ -336,28 +338,28 @@
 #undef	CONFIG_IDE_LED			/* LED   for ide not supported	*/
 #undef	CONFIG_IDE_RESET		/* reset for ide not supported	*/
 
-#define CFG_IDE_MAXBUS		1	/* max. 1 IDE bus		*/
-#define CFG_IDE_MAXDEVICE	1	/* max. 1 drive per IDE bus	*/
+#define CONFIG_SYS_IDE_MAXBUS		1	/* max. 1 IDE bus		*/
+#define CONFIG_SYS_IDE_MAXDEVICE	1	/* max. 1 drive per IDE bus	*/
 
-#define CFG_ATA_IDE0_OFFSET	0x0000
+#define CONFIG_SYS_ATA_IDE0_OFFSET	0x0000
 
-#define CFG_ATA_BASE_ADDR	CFG_PCMCIA_MEM_ADDR
+#define CONFIG_SYS_ATA_BASE_ADDR	CONFIG_SYS_PCMCIA_MEM_ADDR
 
 /* Offset for data I/O			*/
-#define CFG_ATA_DATA_OFFSET	(CFG_PCMCIA_MEM_SIZE + 0x320)
+#define CONFIG_SYS_ATA_DATA_OFFSET	(CONFIG_SYS_PCMCIA_MEM_SIZE + 0x320)
 
 /* Offset for normal register accesses	*/
-#define CFG_ATA_REG_OFFSET	(2 * CFG_PCMCIA_MEM_SIZE + 0x320)
+#define CONFIG_SYS_ATA_REG_OFFSET	(2 * CONFIG_SYS_PCMCIA_MEM_SIZE + 0x320)
 
 /* Offset for alternate registers	*/
-#define CFG_ATA_ALT_OFFSET	0x0100
+#define CONFIG_SYS_ATA_ALT_OFFSET	0x0100
 
 /*-----------------------------------------------------------------------
  *
  *-----------------------------------------------------------------------
  *
  */
-#define CFG_DER	0
+#define CONFIG_SYS_DER	0
 
 /*
  * Init Memory Controller:
@@ -372,22 +374,22 @@
  * restrict access enough to keep SRAM working (if any)
  * but not too much to meddle with FLASH accesses
  */
-#define CFG_REMAP_OR_AM		0x80000000	/* OR addr mask */
-#define CFG_PRELIM_OR_AM	0xE0000000	/* OR addr mask */
+#define CONFIG_SYS_REMAP_OR_AM		0x80000000	/* OR addr mask */
+#define CONFIG_SYS_PRELIM_OR_AM	0xE0000000	/* OR addr mask */
 
 /*
  * FLASH timing:
  */
-#define CFG_OR_TIMING_FLASH	(OR_ACS_DIV1  | OR_TRLX | OR_CSNT_SAM | \
+#define CONFIG_SYS_OR_TIMING_FLASH	(OR_ACS_DIV1  | OR_TRLX | OR_CSNT_SAM | \
 				 OR_SCY_3_CLK | OR_EHTR | OR_BI)
 
-#define CFG_OR0_REMAP	(CFG_REMAP_OR_AM  | CFG_OR_TIMING_FLASH)
-#define CFG_OR0_PRELIM	(CFG_PRELIM_OR_AM | CFG_OR_TIMING_FLASH)
-#define CFG_BR0_PRELIM	((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_V )
+#define CONFIG_SYS_OR0_REMAP	(CONFIG_SYS_REMAP_OR_AM  | CONFIG_SYS_OR_TIMING_FLASH)
+#define CONFIG_SYS_OR0_PRELIM	(CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_FLASH)
+#define CONFIG_SYS_BR0_PRELIM	((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_V )
 
-#define CFG_OR1_REMAP	CFG_OR0_REMAP
-#define CFG_OR1_PRELIM	CFG_OR0_PRELIM
-#define CFG_BR1_PRELIM	((FLASH_BASE1_PRELIM & BR_BA_MSK) | BR_V )
+#define CONFIG_SYS_OR1_REMAP	CONFIG_SYS_OR0_REMAP
+#define CONFIG_SYS_OR1_PRELIM	CONFIG_SYS_OR0_PRELIM
+#define CONFIG_SYS_BR1_PRELIM	((FLASH_BASE1_PRELIM & BR_BA_MSK) | BR_V )
 
 /*
  * BR2/3 and OR2/3 (SDRAM)
@@ -398,19 +400,19 @@
 #define	SDRAM_MAX_SIZE		0x04000000	/* max 64 MB per bank	*/
 
 /* SDRAM timing: Multiplexed addresses, GPL5 output to GPL5_A (don't care)	*/
-#define CFG_OR_TIMING_SDRAM	0x00000A00
+#define CONFIG_SYS_OR_TIMING_SDRAM	0x00000A00
 
-#define CFG_OR2_PRELIM	(CFG_PRELIM_OR_AM | CFG_OR_TIMING_SDRAM )
-#define CFG_BR2_PRELIM	((SDRAM_BASE2_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
+#define CONFIG_SYS_OR2_PRELIM	(CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_SDRAM )
+#define CONFIG_SYS_BR2_PRELIM	((SDRAM_BASE2_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
 
 #ifndef	CONFIG_CAN_DRIVER
-#define	CFG_OR3_PRELIM	CFG_OR2_PRELIM
-#define CFG_BR3_PRELIM	((SDRAM_BASE3_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
+#define	CONFIG_SYS_OR3_PRELIM	CONFIG_SYS_OR2_PRELIM
+#define CONFIG_SYS_BR3_PRELIM	((SDRAM_BASE3_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
 #else	/* CAN uses CS3#, so we can have only one SDRAM bank anyway */
-#define	CFG_CAN_BASE		0xC0000000	/* CAN mapped at 0xC0000000	*/
-#define CFG_CAN_OR_AM		0xFFFF8000	/* 32 kB address mask		*/
-#define CFG_OR3_CAN		(CFG_CAN_OR_AM | OR_G5LA | OR_BI)
-#define CFG_BR3_CAN		((CFG_CAN_BASE & BR_BA_MSK) | \
+#define	CONFIG_SYS_CAN_BASE		0xC0000000	/* CAN mapped at 0xC0000000	*/
+#define CONFIG_SYS_CAN_OR_AM		0xFFFF8000	/* 32 kB address mask		*/
+#define CONFIG_SYS_OR3_CAN		(CONFIG_SYS_CAN_OR_AM | OR_G5LA | OR_BI)
+#define CONFIG_SYS_BR3_CAN		((CONFIG_SYS_CAN_BASE & BR_BA_MSK) | \
 					BR_PS_8 | BR_MS_UPMB | BR_V )
 #endif	/* CONFIG_CAN_DRIVER */
 
@@ -441,34 +443,34 @@
  * 80 Mhz => 80.000.000 / Divider = 156
  */
 
-#define CFG_PTA_PER_CLK	((4096 * 32 * 1000) / (4 * 64))
-#define CFG_MAMR_PTA	98
+#define CONFIG_SYS_PTA_PER_CLK	((4096 * 32 * 1000) / (4 * 64))
+#define CONFIG_SYS_MAMR_PTA	98
 
 /*
  * For 16 MBit, refresh rates could be 31.3 us
  * (= 64 ms / 2K = 125 / quad bursts).
  * For a simpler initialization, 15.6 us is used instead.
  *
- * #define CFG_MPTPR_2BK_2K	MPTPR_PTP_DIV32		for 2 banks
- * #define CFG_MPTPR_1BK_2K	MPTPR_PTP_DIV64		for 1 bank
+ * #define CONFIG_SYS_MPTPR_2BK_2K	MPTPR_PTP_DIV32		for 2 banks
+ * #define CONFIG_SYS_MPTPR_1BK_2K	MPTPR_PTP_DIV64		for 1 bank
  */
-#define CFG_MPTPR_2BK_4K	MPTPR_PTP_DIV16		/* setting for 2 banks	*/
-#define CFG_MPTPR_1BK_4K	MPTPR_PTP_DIV32		/* setting for 1 bank	*/
+#define CONFIG_SYS_MPTPR_2BK_4K	MPTPR_PTP_DIV16		/* setting for 2 banks	*/
+#define CONFIG_SYS_MPTPR_1BK_4K	MPTPR_PTP_DIV32		/* setting for 1 bank	*/
 
 /* refresh rate 7.8 us (= 64 ms / 8K = 31.2 / quad bursts) for 256 MBit		*/
-#define CFG_MPTPR_2BK_8K	MPTPR_PTP_DIV8		/* setting for 2 banks	*/
-#define CFG_MPTPR_1BK_8K	MPTPR_PTP_DIV16		/* setting for 1 bank	*/
+#define CONFIG_SYS_MPTPR_2BK_8K	MPTPR_PTP_DIV8		/* setting for 2 banks	*/
+#define CONFIG_SYS_MPTPR_1BK_8K	MPTPR_PTP_DIV16		/* setting for 1 bank	*/
 
 /*
  * MAMR settings for SDRAM
  */
 
 /* 8 column SDRAM */
-#define CFG_MAMR_8COL	((CFG_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
+#define CONFIG_SYS_MAMR_8COL	((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
 			 MAMR_AMA_TYPE_0 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A11 |	\
 			 MAMR_RLFA_1X	 | MAMR_WLFA_1X	   | MAMR_TLFA_4X)
 /* 9 column SDRAM */
-#define CFG_MAMR_9COL	((CFG_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
+#define CONFIG_SYS_MAMR_9COL	((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
 			 MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 |	\
 			 MAMR_RLFA_1X	 | MAMR_WLFA_1X	   | MAMR_TLFA_4X)
 
diff --git a/include/configs/TQM8260.h b/include/configs/TQM8260.h
index ced87b507..ac9c94e68 100644
--- a/include/configs/TQM8260.h
+++ b/include/configs/TQM8260.h
@@ -60,11 +60,7 @@
 
 #define	CONFIG_BOOTCOUNT_LIMIT
 
-#if defined(CONFIG_CONS_NONE) || defined(CONFIG_CONS_USE_EXTC)
-#define CONFIG_BAUDRATE		230400
-#else
-#define CONFIG_BAUDRATE		9600
-#endif
+#define CONFIG_BAUDRATE		115200
 
 #define CONFIG_PREBOOT	"echo;echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;echo"
 
@@ -83,18 +79,18 @@
 	"flash_self=run ramargs addip;"					\
 		"bootm ${kernel_addr} ${ramdisk_addr}\0"		\
 	"net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0"	\
-	"rootpath=/opt/eldk/ppc_82xx\0"					\
-	"bootfile=/tftpboot/TQM8260/uImage\0"				\
-	"kernel_addr=40040000\0"					\
-	"ramdisk_addr=40100000\0"					\
+	"rootpath=/opt/eldk/ppc_6xx\0"					\
+	"bootfile=tqm8260/uImage\0"				\
+	"kernel_addr=40080000\0"					\
+	"ramdisk_addr=40200000\0"					\
 	""
 #define CONFIG_BOOTCOMMAND	"run flash_self"
 
 /* enable I2C and select the hardware/software driver */
 #undef  CONFIG_HARD_I2C			/* I2C with hardware support	*/
 #define CONFIG_SOFT_I2C		1	/* I2C bit-banged		*/
-#define CFG_I2C_SPEED		400000	/* I2C speed and slave address	*/
-#define CFG_I2C_SLAVE		0x7F
+#define CONFIG_SYS_I2C_SPEED		400000	/* I2C speed and slave address	*/
+#define CONFIG_SYS_I2C_SLAVE		0x7F
 
 /*
  * Software (bit-bang) I2C driver configuration
@@ -126,10 +122,10 @@
 #define I2C_DELAY	udelay(5)	/* 1/4 I2C clock duration */
 #endif
 
-#define CFG_I2C_EEPROM_ADDR	0x50
-#define CFG_I2C_EEPROM_ADDR_LEN 2
-#define CFG_EEPROM_PAGE_WRITE_BITS	4
-#define CFG_EEPROM_PAGE_WRITE_DELAY_MS	10	/* and takes up to 10 msec */
+#define CONFIG_SYS_I2C_EEPROM_ADDR	0x50
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS	4
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	10	/* and takes up to 10 msec */
 
 #define CONFIG_I2C_X
 
@@ -183,7 +179,7 @@
  *  - RX clk is CLK11
  *  - TX clk is CLK12
  */
-# define CFG_CMXSCR_VALUE	(CMXSCR_RS1CS_CLK11 | CMXSCR_TS1CS_CLK12)
+# define CONFIG_SYS_CMXSCR_VALUE	(CMXSCR_RS1CS_CLK11 | CMXSCR_TS1CS_CLK12)
 
 #elif defined(CONFIG_ETHER_ON_FCC) && (CONFIG_ETHER_INDEX == 2)
 
@@ -193,10 +189,10 @@
  * - RAM for BD/Buffers is on the 60x Bus (see 28-13)
  * - Enable Full Duplex in FSMR
  */
-# define CFG_CMXFCR_MASK	(CMXFCR_FC2|CMXFCR_RF2CS_MSK|CMXFCR_TF2CS_MSK)
-# define CFG_CMXFCR_VALUE	(CMXFCR_RF2CS_CLK13|CMXFCR_TF2CS_CLK14)
-# define CFG_CPMFCR_RAMTYPE	0
-# define CFG_FCC_PSMR		(FCC_PSMR_FDE|FCC_PSMR_LPB)
+# define CONFIG_SYS_CMXFCR_MASK	(CMXFCR_FC2|CMXFCR_RF2CS_MSK|CMXFCR_TF2CS_MSK)
+# define CONFIG_SYS_CMXFCR_VALUE	(CMXFCR_RF2CS_CLK13|CMXFCR_TF2CS_CLK14)
+# define CONFIG_SYS_CPMFCR_RAMTYPE	0
+# define CONFIG_SYS_FCC_PSMR		(FCC_PSMR_FDE|FCC_PSMR_LPB)
 
 #endif /* CONFIG_ETHER_ON_FCC, CONFIG_ETHER_INDEX */
 
@@ -213,7 +209,7 @@
 #endif	/* CONFIG_MPC8255 */
 
 #define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
-#undef	CFG_LOADS_BAUD_CHANGE		/* don't allow baudrate change	*/
+#undef	CONFIG_SYS_LOADS_BAUD_CHANGE		/* don't allow baudrate change	*/
 
 #undef	CONFIG_WATCHDOG			/* watchdog disabled		*/
 
@@ -245,142 +241,143 @@
 /*
  * Miscellaneous configurable options
  */
-#define	CFG_LONGHELP			/* undef to save memory		*/
-#define	CFG_PROMPT	"=> "		/* Monitor Command Prompt	*/
+#define	CONFIG_SYS_LONGHELP			/* undef to save memory		*/
+#define	CONFIG_SYS_PROMPT	"=> "		/* Monitor Command Prompt	*/
 
 #define CONFIG_CMDLINE_EDITING	1	/* add command line history	*/
-#define CFG_HUSH_PARSER		1	/* Use the HUSH parser		*/
-#ifdef	CFG_HUSH_PARSER
-#define	CFG_PROMPT_HUSH_PS2	"> "
+#define CONFIG_SYS_HUSH_PARSER		1	/* Use the HUSH parser		*/
+#ifdef	CONFIG_SYS_HUSH_PARSER
+#define	CONFIG_SYS_PROMPT_HUSH_PS2	"> "
 #endif
 
 #if defined(CONFIG_CMD_KGDB)
-#define	CFG_CBSIZE	1024		/* Console I/O Buffer Size	*/
+#define	CONFIG_SYS_CBSIZE	1024		/* Console I/O Buffer Size	*/
 #else
-#define	CFG_CBSIZE	256		/* Console I/O Buffer Size	*/
+#define	CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size	*/
 #endif
-#define	CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define	CFG_MAXARGS	16		/* max number of command args	*/
-#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+#define	CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define	CONFIG_SYS_MAXARGS	16		/* max number of command args	*/
+#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
 
-#define CFG_MEMTEST_START	0x0400000	/* memtest works on	*/
-#define CFG_MEMTEST_END	0x0C00000	/* 4 ... 12 MB in DRAM	*/
+#define CONFIG_SYS_MEMTEST_START	0x0400000	/* memtest works on	*/
+#define CONFIG_SYS_MEMTEST_END	0x0C00000	/* 4 ... 12 MB in DRAM	*/
 
-#define	CFG_LOAD_ADDR	0x100000	/* default load address	*/
+#define	CONFIG_SYS_LOAD_ADDR	0x100000	/* default load address	*/
 
-#define	CFG_HZ		1000		/* decrementer freq: 1 ms ticks	*/
+#define	CONFIG_SYS_HZ		1000		/* decrementer freq: 1 ms ticks	*/
 
-#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
 
-#define	CFG_RESET_ADDRESS 0xFFFFFFFC	/* "bad" address		*/
+#define	CONFIG_SYS_RESET_ADDRESS 0xFFFFFFFC	/* "bad" address		*/
 
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define CFG_BOOTMAPSZ        (8 << 20)       /* Initial Memory map for Linux */
+#define CONFIG_SYS_BOOTMAPSZ        (8 << 20)       /* Initial Memory map for Linux */
 
 
 /* What should the base address of the main FLASH be and how big is
  * it (in MBytes)? This must contain TEXT_BASE from board/tqm8260/config.mk
  * The main FLASH is whichever is connected to *CS0.
  */
-#define CFG_FLASH0_BASE 0x40000000
-#define CFG_FLASH1_BASE 0x60000000
-#define CFG_FLASH0_SIZE 32
-#define CFG_FLASH1_SIZE 32
+#define CONFIG_SYS_FLASH0_BASE 0x40000000
+#define CONFIG_SYS_FLASH1_BASE 0x60000000
+#define CONFIG_SYS_FLASH0_SIZE 32
+#define CONFIG_SYS_FLASH1_SIZE 32
 
 /* Flash bank size (for preliminary settings)
  */
-#define CFG_FLASH_SIZE CFG_FLASH0_SIZE
+#define CONFIG_SYS_FLASH_SIZE CONFIG_SYS_FLASH0_SIZE
 
 /*-----------------------------------------------------------------------
  * FLASH organization
  */
-#define CFG_MAX_FLASH_BANKS	1	/* max num of memory banks      */
-#define CFG_MAX_FLASH_SECT	128	/* max num of sects on one chip */
+#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max num of memory banks      */
+#define CONFIG_SYS_MAX_FLASH_SECT	128	/* max num of sects on one chip */
 
-#define CFG_FLASH_ERASE_TOUT	240000	/* Flash Erase Timeout (in ms)  */
-#define CFG_FLASH_WRITE_TOUT	500	/* Flash Write Timeout (in ms)  */
+#define CONFIG_SYS_FLASH_ERASE_TOUT	240000	/* Flash Erase Timeout (in ms)  */
+#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Flash Write Timeout (in ms)  */
 
-#if 0
-/* Start port with environment in flash; switch to EEPROM later */
-#define CFG_ENV_IS_IN_FLASH	1
-#define CFG_ENV_ADDR		(CFG_FLASH_BASE+0x40000)
-#define CFG_ENV_SIZE		0x40000
-#define CFG_ENV_SECT_SIZE	0x40000
-#else
-/* Final version: environment in EEPROM */
-#define CFG_ENV_IS_IN_EEPROM	1
-#define CFG_ENV_OFFSET		0
-#define CFG_ENV_SIZE		2048
-#endif
+/* use CFI flash driver */
+#define CONFIG_SYS_FLASH_CFI		1	/* Flash is CFI conformant */
+#define CONFIG_FLASH_CFI_DRIVER		1	/* Use the common driver */
+#define CONFIG_SYS_FLASH_BANKS_LIST	{ CONFIG_SYS_FLASH_BASE }
+#define CONFIG_SYS_FLASH_EMPTY_INFO	1
+#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1
+
+#define CONFIG_ENV_IS_IN_FLASH	1
+#define CONFIG_ENV_ADDR		(CONFIG_SYS_FLASH_BASE + 0x40000)
+#define CONFIG_ENV_SIZE		0x08000
+#define CONFIG_ENV_SECT_SIZE	0x40000
+#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE)
+#define CONFIG_ENV_SIZE_REDUND	CONFIG_ENV_SIZE
 
 /*-----------------------------------------------------------------------
  * Hardware Information Block
  */
-#define CFG_HWINFO_OFFSET	0x0003FFC0	/* offset of HW Info block */
-#define CFG_HWINFO_SIZE		0x00000040	/* size   of HW Info block */
-#define CFG_HWINFO_MAGIC	0x54514D38	/* 'TQM8' */
+#define CONFIG_SYS_HWINFO_OFFSET	0x0003FFC0	/* offset of HW Info block */
+#define CONFIG_SYS_HWINFO_SIZE		0x00000040	/* size   of HW Info block */
+#define CONFIG_SYS_HWINFO_MAGIC	0x54514D38	/* 'TQM8' */
 
 /*-----------------------------------------------------------------------
  * Hard Reset Configuration Words
  *
- * if you change bits in the HRCW, you must also change the CFG_*
+ * if you change bits in the HRCW, you must also change the CONFIG_SYS_*
  * defines for the various registers affected by the HRCW e.g. changing
- * HRCW_DPPCxx requires you to also change CFG_SIUMCR.
+ * HRCW_DPPCxx requires you to also change CONFIG_SYS_SIUMCR.
  */
 #define	__HRCW__ALL__		(HRCW_CIP | HRCW_ISB111 | HRCW_BMS)
 
 #if defined(CONFIG_MPC8255) || defined(CONFIG_MPC8265)
-#  define CFG_HRCW_MASTER	(__HRCW__ALL__ | HRCW_MODCK_H0111)
+#  define CONFIG_SYS_HRCW_MASTER	(__HRCW__ALL__ | HRCW_MODCK_H0111)
 #else	/* ! MPC8255 && !MPC8265 */
 # if defined(CONFIG_266MHz)
-#  define CFG_HRCW_MASTER	(__HRCW__ALL__ | HRCW_MODCK_H0111)
+#  define CONFIG_SYS_HRCW_MASTER	(__HRCW__ALL__ | HRCW_MODCK_H0111)
 # elif defined(CONFIG_300MHz)
-#  define CFG_HRCW_MASTER	(__HRCW__ALL__ | HRCW_MODCK_H0110)
+#  define CONFIG_SYS_HRCW_MASTER	(__HRCW__ALL__ | HRCW_MODCK_H0110)
 # else
-#  define CFG_HRCW_MASTER	(__HRCW__ALL__)
+#  define CONFIG_SYS_HRCW_MASTER	(__HRCW__ALL__)
 # endif
 #endif	/* CONFIG_MPC8255 */
 
 /* no slaves so just fill with zeros */
-#define CFG_HRCW_SLAVE1		0
-#define CFG_HRCW_SLAVE2		0
-#define CFG_HRCW_SLAVE3		0
-#define CFG_HRCW_SLAVE4		0
-#define CFG_HRCW_SLAVE5		0
-#define CFG_HRCW_SLAVE6		0
-#define CFG_HRCW_SLAVE7		0
+#define CONFIG_SYS_HRCW_SLAVE1		0
+#define CONFIG_SYS_HRCW_SLAVE2		0
+#define CONFIG_SYS_HRCW_SLAVE3		0
+#define CONFIG_SYS_HRCW_SLAVE4		0
+#define CONFIG_SYS_HRCW_SLAVE5		0
+#define CONFIG_SYS_HRCW_SLAVE6		0
+#define CONFIG_SYS_HRCW_SLAVE7		0
 
 /*-----------------------------------------------------------------------
  * Internal Memory Mapped Register
  */
-#define CFG_IMMR		0xFFF00000
+#define CONFIG_SYS_IMMR		0xFFF00000
 
 /*-----------------------------------------------------------------------
  * Definitions for initial stack pointer and data area (in DPRAM)
  */
-#define CFG_INIT_RAM_ADDR	CFG_IMMR
-#define CFG_INIT_RAM_END	0x4000  /* End of used area in DPRAM    */
-#define CFG_GBL_DATA_SIZE	128 /* size in bytes reserved for initial data*/
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_IMMR
+#define CONFIG_SYS_INIT_RAM_END	0x4000  /* End of used area in DPRAM    */
+#define CONFIG_SYS_GBL_DATA_SIZE	128 /* size in bytes reserved for initial data*/
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
 /*-----------------------------------------------------------------------
  * Start addresses for the final memory configuration
  * (Set up by the startup code)
- * Please note that CFG_SDRAM_BASE _must_ start at 0
+ * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
  *
- * 60x SDRAM is mapped at CFG_SDRAM_BASE, local SDRAM
+ * 60x SDRAM is mapped at CONFIG_SYS_SDRAM_BASE, local SDRAM
  * is mapped at SDRAM_BASE2_PRELIM.
  */
-#define CFG_SDRAM_BASE		0x00000000
-#define CFG_FLASH_BASE		CFG_FLASH0_BASE
-#define CFG_MONITOR_BASE	TEXT_BASE
-#define CFG_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor */
-#define CFG_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()*/
+#define CONFIG_SYS_SDRAM_BASE		0x00000000
+#define CONFIG_SYS_FLASH_BASE		CONFIG_SYS_FLASH0_BASE
+#define CONFIG_SYS_MONITOR_BASE	TEXT_BASE
+#define CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor */
+#define CONFIG_SYS_MALLOC_LEN		(512 << 10)	/* Reserve 512 kB for malloc()*/
 
 /*
  * Internal Definitions
@@ -394,9 +391,9 @@
 /*-----------------------------------------------------------------------
  * Cache Configuration
  */
-#define CFG_CACHELINE_SIZE      32      /* For MPC8260 CPU              */
+#define CONFIG_SYS_CACHELINE_SIZE      32      /* For MPC8260 CPU              */
 #if defined(CONFIG_CMD_KGDB)
-# define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value */
+# define CONFIG_SYS_CACHELINE_SHIFT	5	/* log base 2 of the above value */
 #endif
 
 /*-----------------------------------------------------------------------
@@ -409,28 +406,28 @@
  *
  * HID1 has only read-only information - nothing to set.
  */
-#define CFG_HID0_INIT   (HID0_ICE|HID0_DCE|HID0_ICFI|HID0_DCI|\
+#define CONFIG_SYS_HID0_INIT   (HID0_ICE|HID0_DCE|HID0_ICFI|HID0_DCI|\
 				HID0_IFEM|HID0_ABE)
-#define CFG_HID0_FINAL  (HID0_IFEM|HID0_ABE)
-#define CFG_HID2        0
+#define CONFIG_SYS_HID0_FINAL  (HID0_IFEM|HID0_ABE)
+#define CONFIG_SYS_HID2        0
 
 /*-----------------------------------------------------------------------
  * RMR - Reset Mode Register                                     5-5
  *-----------------------------------------------------------------------
  * turn on Checkstop Reset Enable
  */
-#define CFG_RMR         RMR_CSRE
+#define CONFIG_SYS_RMR         RMR_CSRE
 
 /*-----------------------------------------------------------------------
  * BCR - Bus Configuration                                       4-25
  *-----------------------------------------------------------------------
  */
 #ifdef	CONFIG_BUSMODE_60x
-#define CFG_BCR         (BCR_EBM|BCR_L2C|BCR_LETM|\
+#define CONFIG_SYS_BCR         (BCR_EBM|BCR_L2C|BCR_LETM|\
 			 BCR_NPQM0|BCR_NPQM1|BCR_NPQM2)	/* 60x mode  */
 #else
 #define BCR_APD01	0x10000000
-#define CFG_BCR		(BCR_APD01|BCR_ETM|BCR_LETM)	/* 8260 mode */
+#define CONFIG_SYS_BCR		(BCR_APD01|BCR_ETM|BCR_LETM)	/* 8260 mode */
 #endif
 
 /*-----------------------------------------------------------------------
@@ -438,9 +435,9 @@
  *-----------------------------------------------------------------------
  */
 #if 0
-#define CFG_SIUMCR      (SIUMCR_DPPC10|SIUMCR_APPC10)
+#define CONFIG_SYS_SIUMCR      (SIUMCR_DPPC10|SIUMCR_APPC10)
 #else
-#define CFG_SIUMCR      (SIUMCR_DPPC00|SIUMCR_APPC10)
+#define CONFIG_SYS_SIUMCR      (SIUMCR_DPPC00|SIUMCR_APPC10)
 #endif
 
 
@@ -451,10 +448,10 @@
  * Watchdog & Bus Monitor Timer max, 60x Bus Monitor enable
  */
 #if defined(CONFIG_WATCHDOG)
-#define CFG_SYPCR       (SYPCR_SWTC|SYPCR_BMT|SYPCR_PBME|SYPCR_LBME|\
+#define CONFIG_SYS_SYPCR       (SYPCR_SWTC|SYPCR_BMT|SYPCR_PBME|SYPCR_LBME|\
 			 SYPCR_SWRI|SYPCR_SWP|SYPCR_SWE)
 #else
-#define CFG_SYPCR       (SYPCR_SWTC|SYPCR_BMT|SYPCR_PBME|SYPCR_LBME|\
+#define CONFIG_SYS_SYPCR       (SYPCR_SWTC|SYPCR_BMT|SYPCR_PBME|SYPCR_LBME|\
 			 SYPCR_SWRI|SYPCR_SWP)
 #endif /* CONFIG_WATCHDOG */
 
@@ -464,7 +461,7 @@
  * Clear once per Second and Alarm Interrupt Status, Set 32KHz timersclk,
  * and enable Time Counter
  */
-#define CFG_TMCNTSC     (TMCNTSC_SEC|TMCNTSC_ALR|TMCNTSC_TCF|TMCNTSC_TCE)
+#define CONFIG_SYS_TMCNTSC     (TMCNTSC_SEC|TMCNTSC_ALR|TMCNTSC_TCF|TMCNTSC_TCE)
 
 /*-----------------------------------------------------------------------
  * PISCR - Periodic Interrupt Status and Control                 4-42
@@ -472,20 +469,20 @@
  * Clear Periodic Interrupt Status, Set 32KHz timersclk, and enable
  * Periodic timer
  */
-#define CFG_PISCR       (PISCR_PS|PISCR_PTF|PISCR_PTE)
+#define CONFIG_SYS_PISCR       (PISCR_PS|PISCR_PTF|PISCR_PTE)
 
 /*-----------------------------------------------------------------------
  * SCCR - System Clock Control                                   9-8
  *-----------------------------------------------------------------------
  * Ensure DFBRG is Divide by 16
  */
-#define CFG_SCCR        0
+#define CONFIG_SYS_SCCR        0
 
 /*-----------------------------------------------------------------------
  * RCCR - RISC Controller Configuration                         13-7
  *-----------------------------------------------------------------------
  */
-#define CFG_RCCR        0
+#define CONFIG_SYS_RCCR        0
 
 /*
  * Init Memory Controller:
@@ -500,17 +497,17 @@
 
 	/* Initialize SDRAM on local bus
 	 */
-#define CFG_INIT_LOCAL_SDRAM
+#define CONFIG_SYS_INIT_LOCAL_SDRAM
 
 #define SDRAM_MAX_SIZE	0x08000000	/* max. 128 MB		*/
 
 /* Minimum mask to separate preliminary
  * address ranges for CS[0:2]
  */
-#define CFG_GLOBAL_SDRAM_LIMIT	(512<<20)	/* less than 512 MB */
-#define CFG_LOCAL_SDRAM_LIMIT	(128<<20)	/* less than 128 MB */
+#define CONFIG_SYS_GLOBAL_SDRAM_LIMIT	(512<<20)	/* less than 512 MB */
+#define CONFIG_SYS_LOCAL_SDRAM_LIMIT	(128<<20)	/* less than 128 MB */
 
-#define CFG_MPTPR       0x4000
+#define CONFIG_SYS_MPTPR       0x4000
 
 /*-----------------------------------------------------------------------------
  * Address for Mode Register Set (MRS) command
@@ -527,17 +524,17 @@
  *  Settings:              |  0  |  0    0  |  0  1  0  |  0  |   0  1  0    |
  *-----------------------------------------------------------------------------
  */
-#define CFG_MRS_OFFS	0x00000110
+#define CONFIG_SYS_MRS_OFFS	0x00000110
 
 
 /* Bank 0 - FLASH
  */
-#define CFG_BR0_PRELIM  ((CFG_FLASH_BASE & BRx_BA_MSK)  |\
+#define CONFIG_SYS_BR0_PRELIM  ((CONFIG_SYS_FLASH_BASE & BRx_BA_MSK)  |\
 			 BRx_PS_64                      |\
 			 BRx_MS_GPCM_P                  |\
 			 BRx_V)
 
-#define CFG_OR0_PRELIM  (MEG_TO_AM(CFG_FLASH_SIZE)      |\
+#define CONFIG_SYS_OR0_PRELIM  (MEG_TO_AM(CONFIG_SYS_FLASH_SIZE)      |\
 			 ORxG_CSNT                      |\
 			 ORxG_ACS_DIV1                  |\
 			 ORxG_SCY_3_CLK                 |\
@@ -550,25 +547,25 @@
 
 /* Bank 1 - 60x bus SDRAM
  */
-#define CFG_PSRT        0x20
-#define CFG_LSRT        0x20
-#ifndef CFG_RAMBOOT
-#define CFG_BR1_PRELIM  ((CFG_SDRAM_BASE & BRx_BA_MSK)  |\
+#define CONFIG_SYS_PSRT        0x20
+#define CONFIG_SYS_LSRT        0x20
+#ifndef CONFIG_SYS_RAMBOOT
+#define CONFIG_SYS_BR1_PRELIM  ((CONFIG_SYS_SDRAM_BASE & BRx_BA_MSK)  |\
 			 BRx_PS_64                      |\
 			 BRx_MS_SDRAM_P                 |\
 			 BRx_V)
 
-#define CFG_OR1_PRELIM	CFG_OR1_8COL
+#define CONFIG_SYS_OR1_PRELIM	CONFIG_SYS_OR1_8COL
 
 
 	/* SDRAM initialization values for 8-column chips
 	 */
-#define CFG_OR1_8COL    ((~(CFG_GLOBAL_SDRAM_LIMIT-1) & ORxS_SDAM_MSK) |\
+#define CONFIG_SYS_OR1_8COL    ((~(CONFIG_SYS_GLOBAL_SDRAM_LIMIT-1) & ORxS_SDAM_MSK) |\
 			 ORxS_BPD_4                     |\
 			 ORxS_ROWST_PBI1_A7             |\
 			 ORxS_NUMR_12)
 
-#define CFG_PSDMR_8COL  (PSDMR_PBI                      |\
+#define CONFIG_SYS_PSDMR_8COL  (PSDMR_PBI                      |\
 			 PSDMR_SDAM_A15_IS_A5           |\
 			 PSDMR_BSMA_A12_A14             |\
 			 PSDMR_SDA10_PBI1_A8            |\
@@ -582,12 +579,12 @@
 
 	/* SDRAM initialization values for 9-column chips
 	 */
-#define CFG_OR1_9COL    ((~(CFG_GLOBAL_SDRAM_LIMIT-1) & ORxS_SDAM_MSK) |\
+#define CONFIG_SYS_OR1_9COL    ((~(CONFIG_SYS_GLOBAL_SDRAM_LIMIT-1) & ORxS_SDAM_MSK) |\
 			 ORxS_BPD_4                     |\
 			 ORxS_ROWST_PBI1_A5             |\
 			 ORxS_NUMR_13)
 
-#define CFG_PSDMR_9COL  (PSDMR_PBI                      |\
+#define CONFIG_SYS_PSDMR_9COL  (PSDMR_PBI                      |\
 			 PSDMR_SDAM_A16_IS_A5           |\
 			 PSDMR_BSMA_A12_A14             |\
 			 PSDMR_SDA10_PBI1_A7            |\
@@ -601,24 +598,24 @@
 
 /* Bank 2 - Local bus SDRAM
  */
-#ifdef CFG_INIT_LOCAL_SDRAM
-#define CFG_BR2_PRELIM  ((SDRAM_BASE2_PRELIM & BRx_BA_MSK) |\
+#ifdef CONFIG_SYS_INIT_LOCAL_SDRAM
+#define CONFIG_SYS_BR2_PRELIM  ((SDRAM_BASE2_PRELIM & BRx_BA_MSK) |\
 			 BRx_PS_32                      |\
 			 BRx_MS_SDRAM_L                 |\
 			 BRx_V)
 
-#define CFG_OR2_PRELIM	CFG_OR2_8COL
+#define CONFIG_SYS_OR2_PRELIM	CONFIG_SYS_OR2_8COL
 
 #define SDRAM_BASE2_PRELIM	0x80000000
 
 	/* SDRAM initialization values for 8-column chips
 	 */
-#define CFG_OR2_8COL    ((~(CFG_LOCAL_SDRAM_LIMIT-1) & ORxS_SDAM_MSK) |\
+#define CONFIG_SYS_OR2_8COL    ((~(CONFIG_SYS_LOCAL_SDRAM_LIMIT-1) & ORxS_SDAM_MSK) |\
 			 ORxS_BPD_4                     |\
 			 ORxS_ROWST_PBI1_A8             |\
 			 ORxS_NUMR_12)
 
-#define CFG_LSDMR_8COL  (PSDMR_PBI                      |\
+#define CONFIG_SYS_LSDMR_8COL  (PSDMR_PBI                      |\
 			 PSDMR_SDAM_A15_IS_A5           |\
 			 PSDMR_BSMA_A13_A15             |\
 			 PSDMR_SDA10_PBI1_A9            |\
@@ -632,12 +629,12 @@
 
 	/* SDRAM initialization values for 9-column chips
 	 */
-#define CFG_OR2_9COL    ((~(CFG_LOCAL_SDRAM_LIMIT-1) & ORxS_SDAM_MSK) |\
+#define CONFIG_SYS_OR2_9COL    ((~(CONFIG_SYS_LOCAL_SDRAM_LIMIT-1) & ORxS_SDAM_MSK) |\
 			 ORxS_BPD_4                     |\
 			 ORxS_ROWST_PBI1_A6             |\
 			 ORxS_NUMR_13)
 
-#define CFG_LSDMR_9COL  (PSDMR_PBI                      |\
+#define CONFIG_SYS_LSDMR_9COL  (PSDMR_PBI                      |\
 			 PSDMR_SDAM_A16_IS_A5           |\
 			 PSDMR_BSMA_A13_A15             |\
 			 PSDMR_SDA10_PBI1_A8            |\
@@ -649,8 +646,8 @@
 			 PSDMR_WRC_2C                   |\
 			 PSDMR_CL_2)
 
-#endif /* CFG_INIT_LOCAL_SDRAM */
+#endif /* CONFIG_SYS_INIT_LOCAL_SDRAM */
 
-#endif /* CFG_RAMBOOT */
+#endif /* CONFIG_SYS_RAMBOOT */
 
 #endif	/* __CONFIG_H */
diff --git a/include/configs/TQM8272.h b/include/configs/TQM8272.h
index 039ecf17b..1915a73a6 100644
--- a/include/configs/TQM8272.h
+++ b/include/configs/TQM8272.h
@@ -97,8 +97,8 @@
 /* enable I2C and select the hardware/software driver */
 #undef  CONFIG_HARD_I2C			/* I2C with hardware support	*/
 #define CONFIG_SOFT_I2C		1	/* I2C bit-banged		*/
-#define CFG_I2C_SPEED		400000	/* I2C speed and slave address	*/
-#define CFG_I2C_SLAVE		0x7F
+#define CONFIG_SYS_I2C_SPEED		400000	/* I2C speed and slave address	*/
+#define CONFIG_SYS_I2C_SLAVE		0x7F
 
 /*
  * Software (bit-bang) I2C driver configuration
@@ -116,22 +116,21 @@
 #define CONFIG_I2C_X
 
 /* EEPROM */
-#define CFG_I2C_EEPROM_ADDR_LEN 2
-#define CFG_EEPROM_PAGE_WRITE_BITS	4
-#define CFG_EEPROM_PAGE_WRITE_DELAY_MS	10	/* and takes up to 10 msec */
-#define CFG_EEPROM_PAGE_WRITE_ENABLE	/* necessary for the LM75 chip */
-#define CFG_I2C_MULTI_EEPROMS		1	/* more than one eeprom */
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS	4
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	10	/* and takes up to 10 msec */
+#define CONFIG_SYS_I2C_MULTI_EEPROMS		1	/* more than one eeprom */
 
 /* I2C RTC */
 #define CONFIG_RTC_DS1337		/* Use ds1337 rtc via i2c	*/
-#define CFG_I2C_RTC_ADDR	0x68	/* at address 0x68		*/
+#define CONFIG_SYS_I2C_RTC_ADDR	0x68	/* at address 0x68		*/
 
 /* I2C SYSMON (LM75) */
 #define CONFIG_DTT_LM75		1		/* ON Semi's LM75	*/
 #define CONFIG_DTT_SENSORS	{0}		/* Sensor addresses	*/
-#define CFG_DTT_MAX_TEMP	70
-#define CFG_DTT_LOW_TEMP	-30
-#define CFG_DTT_HYSTERESIS	3
+#define CONFIG_SYS_DTT_MAX_TEMP	70
+#define CONFIG_SYS_DTT_LOW_TEMP	-30
+#define CONFIG_SYS_DTT_HYSTERESIS	3
 
 #else
 #undef CONFIG_HARD_I2C
@@ -177,9 +176,9 @@
  * (On TQM8272 either SCC1 or FCC2 may be chosen: SCC1 is hardwired to the
  * X.29 connector, and FCC2 is hardwired to the X.1 connector)
  */
-#define CFG_FCC_ETHERNET
+#define CONFIG_SYS_FCC_ETHERNET
 
-#if defined(CFG_FCC_ETHERNET)
+#if defined(CONFIG_SYS_FCC_ETHERNET)
 #undef	CONFIG_ETHER_ON_SCC		/* define if ether on SCC       */
 #define	CONFIG_ETHER_ON_FCC		/* define if ether on FCC       */
 #undef	CONFIG_ETHER_NONE		/* define if ether on something else */
@@ -197,7 +196,7 @@
  *  - RX clk is CLK11
  *  - TX clk is CLK12
  */
-# define CFG_CMXSCR_VALUE	(CMXSCR_RS1CS_CLK11 | CMXSCR_TS1CS_CLK12)
+# define CONFIG_SYS_CMXSCR_VALUE	(CMXSCR_RS1CS_CLK11 | CMXSCR_TS1CS_CLK12)
 
 #elif defined(CONFIG_ETHER_ON_FCC) && (CONFIG_ETHER_INDEX == 2)
 
@@ -207,10 +206,10 @@
  * - RAM for BD/Buffers is on the 60x Bus (see 28-13)
  * - Enable Full Duplex in FSMR
  */
-# define CFG_CMXFCR_MASK	(CMXFCR_FC2|CMXFCR_RF2CS_MSK|CMXFCR_TF2CS_MSK)
-# define CFG_CMXFCR_VALUE	(CMXFCR_RF2CS_CLK13|CMXFCR_TF2CS_CLK14)
-# define CFG_CPMFCR_RAMTYPE	0
-# define CFG_FCC_PSMR		(FCC_PSMR_FDE|FCC_PSMR_LPB)
+# define CONFIG_SYS_CMXFCR_MASK	(CMXFCR_FC2|CMXFCR_RF2CS_MSK|CMXFCR_TF2CS_MSK)
+# define CONFIG_SYS_CMXFCR_VALUE	(CMXFCR_RF2CS_CLK13|CMXFCR_TF2CS_CLK14)
+# define CONFIG_SYS_CPMFCR_RAMTYPE	0
+# define CONFIG_SYS_FCC_PSMR		(FCC_PSMR_FDE|FCC_PSMR_LPB)
 
 #endif /* CONFIG_ETHER_ON_FCC, CONFIG_ETHER_INDEX */
 
@@ -222,35 +221,35 @@
 #define MDIO_PORT	2		/* Port C */
 
 #if STK82xx_150
-#define CFG_MDIO_PIN	0x00008000	/* PC16 */
-#define CFG_MDC_PIN	0x00004000	/* PC17 */
+#define CONFIG_SYS_MDIO_PIN	0x00008000	/* PC16 */
+#define CONFIG_SYS_MDC_PIN	0x00004000	/* PC17 */
 #endif
 
 #if STK82xx_100
-#define CFG_MDIO_PIN	0x00000002	/* PC30 */
-#define CFG_MDC_PIN	0x00000001	/* PC31 */
+#define CONFIG_SYS_MDIO_PIN	0x00000002	/* PC30 */
+#define CONFIG_SYS_MDC_PIN	0x00000001	/* PC31 */
 #endif
 
 #if 1
-#define MDIO_ACTIVE	(iop->pdir |=  CFG_MDIO_PIN)
-#define MDIO_TRISTATE	(iop->pdir &= ~CFG_MDIO_PIN)
-#define MDIO_READ	((iop->pdat &  CFG_MDIO_PIN) != 0)
+#define MDIO_ACTIVE	(iop->pdir |=  CONFIG_SYS_MDIO_PIN)
+#define MDIO_TRISTATE	(iop->pdir &= ~CONFIG_SYS_MDIO_PIN)
+#define MDIO_READ	((iop->pdat &  CONFIG_SYS_MDIO_PIN) != 0)
 
-#define MDIO(bit)	if(bit) iop->pdat |=  CFG_MDIO_PIN; \
-			else	iop->pdat &= ~CFG_MDIO_PIN
+#define MDIO(bit)	if(bit) iop->pdat |=  CONFIG_SYS_MDIO_PIN; \
+			else	iop->pdat &= ~CONFIG_SYS_MDIO_PIN
 
-#define MDC(bit)	if(bit) iop->pdat |=  CFG_MDC_PIN; \
-			else	iop->pdat &= ~CFG_MDC_PIN
+#define MDC(bit)	if(bit) iop->pdat |=  CONFIG_SYS_MDC_PIN; \
+			else	iop->pdat &= ~CONFIG_SYS_MDC_PIN
 #else
-#define MDIO_ACTIVE	({unsigned long tmp; tmp = iop->pdir; tmp |=  CFG_MDIO_PIN; iop->pdir = tmp;})
-#define MDIO_TRISTATE	({unsigned long tmp; tmp = iop->pdir; tmp &= ~CFG_MDIO_PIN; iop->pdir = tmp;})
-#define MDIO_READ	((iop->pdat &  CFG_MDIO_PIN) != 0)
+#define MDIO_ACTIVE	({unsigned long tmp; tmp = iop->pdir; tmp |=  CONFIG_SYS_MDIO_PIN; iop->pdir = tmp;})
+#define MDIO_TRISTATE	({unsigned long tmp; tmp = iop->pdir; tmp &= ~CONFIG_SYS_MDIO_PIN; iop->pdir = tmp;})
+#define MDIO_READ	((iop->pdat &  CONFIG_SYS_MDIO_PIN) != 0)
 
-#define MDIO(bit)	if(bit) {unsigned long tmp; tmp = iop->pdat; tmp |=  CFG_MDIO_PIN; iop->pdat = tmp;}\
-			else	{unsigned long tmp; tmp = iop->pdat; tmp &= ~CFG_MDIO_PIN; iop->pdat = tmp;}
+#define MDIO(bit)	if(bit) {unsigned long tmp; tmp = iop->pdat; tmp |=  CONFIG_SYS_MDIO_PIN; iop->pdat = tmp;}\
+			else	{unsigned long tmp; tmp = iop->pdat; tmp &= ~CONFIG_SYS_MDIO_PIN; iop->pdat = tmp;}
 
-#define MDC(bit)	if(bit) {unsigned long tmp; tmp = iop->pdat; tmp |=  CFG_MDC_PIN; iop->pdat = tmp;}\
-			else	{unsigned long tmp; tmp = iop->pdat; tmp &= ~CFG_MDC_PIN; iop->pdat = tmp;}
+#define MDC(bit)	if(bit) {unsigned long tmp; tmp = iop->pdat; tmp |=  CONFIG_SYS_MDC_PIN; iop->pdat = tmp;}\
+			else	{unsigned long tmp; tmp = iop->pdat; tmp &= ~CONFIG_SYS_MDC_PIN; iop->pdat = tmp;}
 #endif
 
 #define MIIDELAY	udelay(1)
@@ -260,7 +259,7 @@
 #define CONFIG_8260_CLKIN	66666666	/* in Hz */
 
 #define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
-#undef	CFG_LOADS_BAUD_CHANGE		/* don't allow baudrate change	*/
+#undef	CONFIG_SYS_LOADS_BAUD_CHANGE		/* don't allow baudrate change	*/
 
 #undef	CONFIG_WATCHDOG			/* watchdog disabled		*/
 
@@ -301,56 +300,56 @@
 /*
  * Miscellaneous configurable options
  */
-#define	CFG_LONGHELP			/* undef to save memory		*/
-#define	CFG_PROMPT	"=> "		/* Monitor Command Prompt	*/
+#define	CONFIG_SYS_LONGHELP			/* undef to save memory		*/
+#define	CONFIG_SYS_PROMPT	"=> "		/* Monitor Command Prompt	*/
 
 #if 0
 #define CONFIG_CMDLINE_EDITING	1	/* add command line history	*/
-#define CFG_HUSH_PARSER		1	/* Use the HUSH parser		*/
-#ifdef	CFG_HUSH_PARSER
-#define	CFG_PROMPT_HUSH_PS2	"> "
+#define CONFIG_SYS_HUSH_PARSER		1	/* Use the HUSH parser		*/
+#ifdef	CONFIG_SYS_HUSH_PARSER
+#define	CONFIG_SYS_PROMPT_HUSH_PS2	"> "
 #endif
 #endif
 
 #if defined(CONFIG_CMD_KGDB)
-#define	CFG_CBSIZE	1024		/* Console I/O Buffer Size	*/
+#define	CONFIG_SYS_CBSIZE	1024		/* Console I/O Buffer Size	*/
 #else
-#define	CFG_CBSIZE	256		/* Console I/O Buffer Size	*/
+#define	CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size	*/
 #endif
-#define	CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define	CFG_MAXARGS	16		/* max number of command args	*/
-#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+#define	CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define	CONFIG_SYS_MAXARGS	16		/* max number of command args	*/
+#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
 
-#define CFG_MEMTEST_START	0x0400000	/* memtest works on	*/
-#define CFG_MEMTEST_END	0x0C00000	/* 4 ... 12 MB in DRAM	*/
+#define CONFIG_SYS_MEMTEST_START	0x0400000	/* memtest works on	*/
+#define CONFIG_SYS_MEMTEST_END	0x0C00000	/* 4 ... 12 MB in DRAM	*/
 
-#define	CFG_LOAD_ADDR	0x300000	/* default load address	*/
+#define	CONFIG_SYS_LOAD_ADDR	0x300000	/* default load address	*/
 
-#define	CFG_HZ		1000		/* decrementer freq: 1 ms ticks	*/
+#define	CONFIG_SYS_HZ		1000		/* decrementer freq: 1 ms ticks	*/
 
-#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
 
-#define	CFG_RESET_ADDRESS 0x40000104	/* "bad" address		*/
+#define	CONFIG_SYS_RESET_ADDRESS 0x40000104	/* "bad" address		*/
 
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define CFG_BOOTMAPSZ        (8 << 20)       /* Initial Memory map for Linux */
+#define CONFIG_SYS_BOOTMAPSZ        (8 << 20)       /* Initial Memory map for Linux */
 
 /*-----------------------------------------------------------------------
  * CAN stuff
  *-----------------------------------------------------------------------
  */
-#define CFG_CAN_BASE	0x51000000
-#define	CFG_CAN_SIZE	1
-#define CFG_CAN_BR	((CFG_CAN_BASE & BRx_BA_MSK)	|\
+#define CONFIG_SYS_CAN_BASE	0x51000000
+#define	CONFIG_SYS_CAN_SIZE	1
+#define CONFIG_SYS_CAN_BR	((CONFIG_SYS_CAN_BASE & BRx_BA_MSK)	|\
 			 BRx_PS_8			|\
 			 BRx_MS_UPMC			|\
 			 BRx_V)
 
-#define CFG_CAN_OR	(MEG_TO_AM(CFG_CAN_SIZE)	|\
+#define CONFIG_SYS_CAN_OR	(MEG_TO_AM(CONFIG_SYS_CAN_SIZE)	|\
 			 ORxU_BI)
 
 
@@ -358,46 +357,46 @@
  * it (in MBytes)? This must contain TEXT_BASE from board/tqm8272/config.mk
  * The main FLASH is whichever is connected to *CS0.
  */
-#define CFG_FLASH0_BASE 0x40000000
-#define CFG_FLASH0_SIZE 32	/* 32 MB */
+#define CONFIG_SYS_FLASH0_BASE 0x40000000
+#define CONFIG_SYS_FLASH0_SIZE 32	/* 32 MB */
 
 /* Flash bank size (for preliminary settings)
  */
-#define CFG_FLASH_SIZE CFG_FLASH0_SIZE
+#define CONFIG_SYS_FLASH_SIZE CONFIG_SYS_FLASH0_SIZE
 
 /*-----------------------------------------------------------------------
  * FLASH organization
  */
-#define CFG_MAX_FLASH_BANKS	1	/* max num of memory banks      */
-#define CFG_MAX_FLASH_SECT	128	/* max num of sects on one chip */
+#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max num of memory banks      */
+#define CONFIG_SYS_MAX_FLASH_SECT	128	/* max num of sects on one chip */
 
-#define CFG_FLASH_CFI				/* flash is CFI compat.	*/
+#define CONFIG_SYS_FLASH_CFI				/* flash is CFI compat.	*/
 #define CONFIG_FLASH_CFI_DRIVER			/* Use common CFI driver*/
-#define CFG_FLASH_EMPTY_INFO		/* print 'E' for empty sector	*/
-#define CFG_FLASH_QUIET_TEST	1	/* don't warn upon unknown flash*/
+#define CONFIG_SYS_FLASH_EMPTY_INFO		/* print 'E' for empty sector	*/
+#define CONFIG_SYS_FLASH_QUIET_TEST	1	/* don't warn upon unknown flash*/
 
-#define CFG_FLASH_ERASE_TOUT	240000	/* Flash Erase Timeout (in ms)  */
-#define CFG_FLASH_WRITE_TOUT	500	/* Flash Write Timeout (in ms)  */
+#define CONFIG_SYS_FLASH_ERASE_TOUT	240000	/* Flash Erase Timeout (in ms)  */
+#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Flash Write Timeout (in ms)  */
 
-#define CFG_UPDATE_FLASH_SIZE
+#define CONFIG_SYS_UPDATE_FLASH_SIZE
 
-#define CFG_ENV_IS_IN_FLASH	1
-#define CFG_ENV_ADDR		(CFG_FLASH_BASE + 0x40000)
-#define CFG_ENV_SIZE		0x20000
-#define CFG_ENV_SECT_SIZE	0x20000
-#define CFG_ENV_ADDR_REDUND	(CFG_ENV_ADDR + CFG_ENV_SIZE)
-#define CFG_ENV_SIZE_REDUND	0x20000
+#define CONFIG_ENV_IS_IN_FLASH	1
+#define CONFIG_ENV_ADDR		(CONFIG_SYS_FLASH_BASE + 0x40000)
+#define CONFIG_ENV_SIZE		0x20000
+#define CONFIG_ENV_SECT_SIZE	0x20000
+#define CONFIG_ENV_ADDR_REDUND	(CONFIG_ENV_ADDR + CONFIG_ENV_SIZE)
+#define CONFIG_ENV_SIZE_REDUND	0x20000
 
 /* Where is the Hardwareinformation Block (from Monitor Sources) */
 #define MON_RES_LENGTH		(0x0003FC00)
-#define HWIB_INFO_START_ADDR    (CFG_FLASH_BASE + MON_RES_LENGTH)
+#define HWIB_INFO_START_ADDR    (CONFIG_SYS_FLASH_BASE + MON_RES_LENGTH)
 #define HWIB_INFO_LEN           512
-#define CIB_INFO_START_ADDR     (CFG_FLASH_BASE + MON_RES_LENGTH + HWIB_INFO_LEN)
+#define CIB_INFO_START_ADDR     (CONFIG_SYS_FLASH_BASE + MON_RES_LENGTH + HWIB_INFO_LEN)
 #define CIB_INFO_LEN            512
 
-#define CFG_HWINFO_OFFSET	0x3fc00	/* offset of HW Info block */
-#define CFG_HWINFO_SIZE		0x00000060	/* size   of HW Info block */
-#define CFG_HWINFO_MAGIC	0x54514D38	/* 'TQM8' */
+#define CONFIG_SYS_HWINFO_OFFSET	0x3fc00	/* offset of HW Info block */
+#define CONFIG_SYS_HWINFO_SIZE		0x00000060	/* size   of HW Info block */
+#define CONFIG_SYS_HWINFO_MAGIC	0x54514D38	/* 'TQM8' */
 
 /*-----------------------------------------------------------------------
  * NAND-FLASH stuff
@@ -405,32 +404,32 @@
  */
 #if defined(CONFIG_CMD_NAND)
 
-#define CFG_NAND_CS_DIST		0x80
-#define CFG_NAND_UPM_WRITE_CMD_OFS	0x20
-#define CFG_NAND_UPM_WRITE_ADDR_OFS	0x40
+#define CONFIG_SYS_NAND_CS_DIST		0x80
+#define CONFIG_SYS_NAND_UPM_WRITE_CMD_OFS	0x20
+#define CONFIG_SYS_NAND_UPM_WRITE_ADDR_OFS	0x40
 
-#define CFG_NAND_BR	((CFG_NAND0_BASE & BRx_BA_MSK)	|\
+#define CONFIG_SYS_NAND_BR	((CONFIG_SYS_NAND0_BASE & BRx_BA_MSK)	|\
 			 BRx_PS_8			|\
 			 BRx_MS_UPMB			|\
 			 BRx_V)
 
-#define CFG_NAND_OR	(MEG_TO_AM(CFG_NAND_SIZE)	|\
+#define CONFIG_SYS_NAND_OR	(MEG_TO_AM(CONFIG_SYS_NAND_SIZE)	|\
 			 ORxU_BI			|\
 			 ORxU_EHTR_8IDLE)
 
-#define CFG_NAND_SIZE	1
-#define CFG_NAND0_BASE 0x50000000
-#define CFG_NAND1_BASE (CFG_NAND0_BASE + CFG_NAND_CS_DIST)
-#define CFG_NAND2_BASE (CFG_NAND1_BASE + CFG_NAND_CS_DIST)
-#define CFG_NAND3_BASE (CFG_NAND2_BASE + CFG_NAND_CS_DIST)
+#define CONFIG_SYS_NAND_SIZE	1
+#define CONFIG_SYS_NAND0_BASE 0x50000000
+#define CONFIG_SYS_NAND1_BASE (CONFIG_SYS_NAND0_BASE + CONFIG_SYS_NAND_CS_DIST)
+#define CONFIG_SYS_NAND2_BASE (CONFIG_SYS_NAND1_BASE + CONFIG_SYS_NAND_CS_DIST)
+#define CONFIG_SYS_NAND3_BASE (CONFIG_SYS_NAND2_BASE + CONFIG_SYS_NAND_CS_DIST)
 
-#define CFG_MAX_NAND_DEVICE     4       /* Max number of NAND devices           */
+#define CONFIG_SYS_MAX_NAND_DEVICE     4       /* Max number of NAND devices           */
 #define NAND_MAX_CHIPS 1
 
-#define CFG_NAND_BASE_LIST { CFG_NAND0_BASE, \
-			     CFG_NAND1_BASE, \
-			     CFG_NAND2_BASE, \
-			     CFG_NAND3_BASE, \
+#define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND0_BASE, \
+			     CONFIG_SYS_NAND1_BASE, \
+			     CONFIG_SYS_NAND2_BASE, \
+			     CONFIG_SYS_NAND3_BASE, \
 			   }
 
 #define WRITE_NAND(d, adr) do{ *(volatile __u8 *)((unsigned long)(adr)) = (__u8)d; } while(0)
@@ -448,58 +447,58 @@
 #define CONFIG_BOARD_EARLY_INIT_F 1	/* Call board_early_init_f	*/
 #define CONFIG_PCI_PNP
 #define CONFIG_EEPRO100
-#define CFG_RX_ETH_BUFFER	8		/* use 8 rx buffer on eepro100	*/
+#define CONFIG_SYS_RX_ETH_BUFFER	8		/* use 8 rx buffer on eepro100	*/
 #define CONFIG_PCI_SCAN_SHOW
 #endif
 
 /*-----------------------------------------------------------------------
  * Hard Reset Configuration Words
  *
- * if you change bits in the HRCW, you must also change the CFG_*
+ * if you change bits in the HRCW, you must also change the CONFIG_SYS_*
  * defines for the various registers affected by the HRCW e.g. changing
- * HRCW_DPPCxx requires you to also change CFG_SIUMCR.
+ * HRCW_DPPCxx requires you to also change CONFIG_SYS_SIUMCR.
  */
 #if 0
 #define	__HRCW__ALL__		(HRCW_CIP | HRCW_ISB111 | HRCW_BMS)
 
-#  define CFG_HRCW_MASTER	(__HRCW__ALL__ | HRCW_MODCK_H0111)
+#  define CONFIG_SYS_HRCW_MASTER	(__HRCW__ALL__ | HRCW_MODCK_H0111)
 #else
-#define CFG_HRCW_MASTER	(HRCW_BPS11 | HRCW_ISB111 | HRCW_BMS | HRCW_MODCK_H0111)
+#define CONFIG_SYS_HRCW_MASTER	(HRCW_BPS11 | HRCW_ISB111 | HRCW_BMS | HRCW_MODCK_H0111)
 #endif
 
 /* no slaves so just fill with zeros */
-#define CFG_HRCW_SLAVE1		0
-#define CFG_HRCW_SLAVE2		0
-#define CFG_HRCW_SLAVE3		0
-#define CFG_HRCW_SLAVE4		0
-#define CFG_HRCW_SLAVE5		0
-#define CFG_HRCW_SLAVE6		0
-#define CFG_HRCW_SLAVE7		0
+#define CONFIG_SYS_HRCW_SLAVE1		0
+#define CONFIG_SYS_HRCW_SLAVE2		0
+#define CONFIG_SYS_HRCW_SLAVE3		0
+#define CONFIG_SYS_HRCW_SLAVE4		0
+#define CONFIG_SYS_HRCW_SLAVE5		0
+#define CONFIG_SYS_HRCW_SLAVE6		0
+#define CONFIG_SYS_HRCW_SLAVE7		0
 
 /*-----------------------------------------------------------------------
  * Internal Memory Mapped Register
  */
-#define CFG_IMMR		0xFFF00000
+#define CONFIG_SYS_IMMR		0xFFF00000
 
 /*-----------------------------------------------------------------------
  * Definitions for initial stack pointer and data area (in DPRAM)
  */
-#define CFG_INIT_RAM_ADDR	CFG_IMMR
-#define CFG_INIT_RAM_END	0x2000  /* End of used area in DPRAM    */
-#define CFG_GBL_DATA_SIZE	128 /* size in bytes reserved for initial data*/
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_IMMR
+#define CONFIG_SYS_INIT_RAM_END	0x2000  /* End of used area in DPRAM    */
+#define CONFIG_SYS_GBL_DATA_SIZE	128 /* size in bytes reserved for initial data*/
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
 /*-----------------------------------------------------------------------
  * Start addresses for the final memory configuration
  * (Set up by the startup code)
- * Please note that CFG_SDRAM_BASE _must_ start at 0
+ * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
  */
-#define CFG_SDRAM_BASE		0x00000000
-#define CFG_FLASH_BASE		CFG_FLASH0_BASE
-#define CFG_MONITOR_BASE	TEXT_BASE
-#define CFG_MONITOR_LEN		(192 << 10)	/* Reserve 192 kB for Monitor */
-#define CFG_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()*/
+#define CONFIG_SYS_SDRAM_BASE		0x00000000
+#define CONFIG_SYS_FLASH_BASE		CONFIG_SYS_FLASH0_BASE
+#define CONFIG_SYS_MONITOR_BASE	TEXT_BASE
+#define CONFIG_SYS_MONITOR_LEN		(192 << 10)	/* Reserve 192 kB for Monitor */
+#define CONFIG_SYS_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()*/
 
 /*
  * Internal Definitions
@@ -512,9 +511,9 @@
 /*-----------------------------------------------------------------------
  * Cache Configuration
  */
-#define CFG_CACHELINE_SIZE      32      /* For MPC8260 CPU              */
+#define CONFIG_SYS_CACHELINE_SIZE      32      /* For MPC8260 CPU              */
 #if defined(CONFIG_CMD_KGDB)
-# define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value */
+# define CONFIG_SYS_CACHELINE_SHIFT	5	/* log base 2 of the above value */
 #endif
 
 /*-----------------------------------------------------------------------
@@ -527,35 +526,35 @@
  *
  * HID1 has only read-only information - nothing to set.
  */
-#define CFG_HID0_INIT   (HID0_ICE|HID0_DCE|HID0_ICFI|HID0_DCI|\
+#define CONFIG_SYS_HID0_INIT   (HID0_ICE|HID0_DCE|HID0_ICFI|HID0_DCI|\
 				HID0_IFEM|HID0_ABE)
-#define CFG_HID0_FINAL  (HID0_IFEM|HID0_ABE)
-#define CFG_HID2        0
+#define CONFIG_SYS_HID0_FINAL  (HID0_IFEM|HID0_ABE)
+#define CONFIG_SYS_HID2        0
 
 /*-----------------------------------------------------------------------
  * RMR - Reset Mode Register                                     5-5
  *-----------------------------------------------------------------------
  * turn on Checkstop Reset Enable
  */
-#define CFG_RMR         RMR_CSRE
+#define CONFIG_SYS_RMR         RMR_CSRE
 
 /*-----------------------------------------------------------------------
  * BCR - Bus Configuration                                       4-25
  *-----------------------------------------------------------------------
  */
-#define CFG_BCR_60x         (BCR_EBM|BCR_NPQM0|BCR_NPQM2)	/* 60x mode  */
+#define CONFIG_SYS_BCR_60x         (BCR_EBM|BCR_NPQM0|BCR_NPQM2)	/* 60x mode  */
 #define BCR_APD01	0x10000000
-#define CFG_BCR_SINGLE		(BCR_APD01|BCR_ETM)	/* 8260 mode */
+#define CONFIG_SYS_BCR_SINGLE		(BCR_APD01|BCR_ETM)	/* 8260 mode */
 
 /*-----------------------------------------------------------------------
  * SIUMCR - SIU Module Configuration                             4-31
  *-----------------------------------------------------------------------
  */
 #if defined(CONFIG_BOARD_GET_CPU_CLK_F)
-#define CFG_SIUMCR_LOW		(SIUMCR_DPPC00)
-#define CFG_SIUMCR_HIGH		(SIUMCR_DPPC00 | SIUMCR_ABE)
+#define CONFIG_SYS_SIUMCR_LOW		(SIUMCR_DPPC00)
+#define CONFIG_SYS_SIUMCR_HIGH		(SIUMCR_DPPC00 | SIUMCR_ABE)
 #else
-#define CFG_SIUMCR		(SIUMCR_DPPC00)
+#define CONFIG_SYS_SIUMCR		(SIUMCR_DPPC00)
 #endif
 
 /*-----------------------------------------------------------------------
@@ -565,10 +564,10 @@
  * Watchdog & Bus Monitor Timer max, 60x Bus Monitor enable
  */
 #if defined(CONFIG_WATCHDOG)
-#define CFG_SYPCR       (SYPCR_SWTC|SYPCR_BMT|SYPCR_PBME|SYPCR_LBME|\
+#define CONFIG_SYS_SYPCR       (SYPCR_SWTC|SYPCR_BMT|SYPCR_PBME|SYPCR_LBME|\
 			 SYPCR_SWRI|SYPCR_SWP|SYPCR_SWE)
 #else
-#define CFG_SYPCR       (SYPCR_SWTC|SYPCR_BMT|SYPCR_PBME|SYPCR_LBME|\
+#define CONFIG_SYS_SYPCR       (SYPCR_SWTC|SYPCR_BMT|SYPCR_PBME|SYPCR_LBME|\
 			 SYPCR_SWRI|SYPCR_SWP)
 #endif /* CONFIG_WATCHDOG */
 
@@ -578,7 +577,7 @@
  * Clear once per Second and Alarm Interrupt Status, Set 32KHz timersclk,
  * and enable Time Counter
  */
-#define CFG_TMCNTSC     (TMCNTSC_SEC|TMCNTSC_ALR|TMCNTSC_TCF|TMCNTSC_TCE)
+#define CONFIG_SYS_TMCNTSC     (TMCNTSC_SEC|TMCNTSC_ALR|TMCNTSC_TCF|TMCNTSC_TCE)
 
 /*-----------------------------------------------------------------------
  * PISCR - Periodic Interrupt Status and Control                 4-42
@@ -586,20 +585,20 @@
  * Clear Periodic Interrupt Status, Set 32KHz timersclk, and enable
  * Periodic timer
  */
-#define CFG_PISCR       (PISCR_PS|PISCR_PTF|PISCR_PTE)
+#define CONFIG_SYS_PISCR       (PISCR_PS|PISCR_PTF|PISCR_PTE)
 
 /*-----------------------------------------------------------------------
  * SCCR - System Clock Control                                   9-8
  *-----------------------------------------------------------------------
  * Ensure DFBRG is Divide by 16
  */
-#define CFG_SCCR        SCCR_DFBRG01
+#define CONFIG_SYS_SCCR        SCCR_DFBRG01
 
 /*-----------------------------------------------------------------------
  * RCCR - RISC Controller Configuration                         13-7
  *-----------------------------------------------------------------------
  */
-#define CFG_RCCR        0
+#define CONFIG_SYS_RCCR        0
 
 /*
  * Init Memory Controller:
@@ -615,16 +614,16 @@
 
 /* Initialize SDRAM
 	 */
-#undef CFG_INIT_LOCAL_SDRAM		/* No SDRAM on Local Bus */
+#undef CONFIG_SYS_INIT_LOCAL_SDRAM		/* No SDRAM on Local Bus */
 
 #define SDRAM_MAX_SIZE	0x20000000	/* max. 512 MB		*/
 
 /* Minimum mask to separate preliminary
  * address ranges for CS[0:2]
  */
-#define CFG_GLOBAL_SDRAM_LIMIT	(512<<20)	/* less than 512 MB */
+#define CONFIG_SYS_GLOBAL_SDRAM_LIMIT	(512<<20)	/* less than 512 MB */
 
-#define CFG_MPTPR       0x4000
+#define CONFIG_SYS_MPTPR       0x4000
 
 /*-----------------------------------------------------------------------------
  * Address for Mode Register Set (MRS) command
@@ -641,16 +640,16 @@
  *  Settings:              |  0  |  0    0  |  0  1  0  |  0  |   0  1  0    |
  *-----------------------------------------------------------------------------
  */
-#define CFG_MRS_OFFS	0x00000110
+#define CONFIG_SYS_MRS_OFFS	0x00000110
 
 /* Bank 0 - FLASH
  */
-#define CFG_BR0_PRELIM  ((CFG_FLASH_BASE & BRx_BA_MSK)  |\
+#define CONFIG_SYS_BR0_PRELIM  ((CONFIG_SYS_FLASH_BASE & BRx_BA_MSK)  |\
 			 BRx_PS_32                      |\
 			 BRx_MS_GPCM_P                  |\
 			 BRx_V)
 
-#define CFG_OR0_PRELIM  (MEG_TO_AM(CFG_FLASH_SIZE)      |\
+#define CONFIG_SYS_OR0_PRELIM  (MEG_TO_AM(CONFIG_SYS_FLASH_SIZE)      |\
 			 ORxG_CSNT                      |\
 			 ORxG_ACS_DIV4                  |\
 			 ORxG_SCY_8_CLK                 |\
@@ -662,25 +661,25 @@
 
 /* Bank 1 - 60x bus SDRAM
  */
-#define CFG_PSRT        0x20	/* Low Value */
-/* #define CFG_PSRT        0x10	 Fast Value */
-#define CFG_LSRT        0x20	/* Local Bus */
-#ifndef CFG_RAMBOOT
-#define CFG_BR1_PRELIM  ((CFG_SDRAM_BASE & BRx_BA_MSK)  |\
+#define CONFIG_SYS_PSRT        0x20	/* Low Value */
+/* #define CONFIG_SYS_PSRT        0x10	 Fast Value */
+#define CONFIG_SYS_LSRT        0x20	/* Local Bus */
+#ifndef CONFIG_SYS_RAMBOOT
+#define CONFIG_SYS_BR1_PRELIM  ((CONFIG_SYS_SDRAM_BASE & BRx_BA_MSK)  |\
 			 BRx_PS_64                      |\
 			 BRx_MS_SDRAM_P                 |\
 			 BRx_V)
 
-#define CFG_OR1_PRELIM	CFG_OR1_8COL
+#define CONFIG_SYS_OR1_PRELIM	CONFIG_SYS_OR1_8COL
 
 /* SDRAM initialization values for 8-column chips
  */
-#define CFG_OR1_8COL    ((~(CFG_GLOBAL_SDRAM_LIMIT-1) & ORxS_SDAM_MSK) |\
+#define CONFIG_SYS_OR1_8COL    ((~(CONFIG_SYS_GLOBAL_SDRAM_LIMIT-1) & ORxS_SDAM_MSK) |\
 			 ORxS_BPD_4                     |\
 			 ORxS_ROWST_PBI1_A7             |\
 			 ORxS_NUMR_12)
 
-#define CFG_PSDMR_8COL  (PSDMR_PBI                      |\
+#define CONFIG_SYS_PSDMR_8COL  (PSDMR_PBI                      |\
 			 PSDMR_SDAM_A15_IS_A5           |\
 			 PSDMR_BSMA_A12_A14             |\
 			 PSDMR_SDA10_PBI1_A8            |\
@@ -696,12 +695,12 @@
 
 /* SDRAM initialization values for 9-column chips
  */
-#define CFG_OR1_9COL    ((~(CFG_GLOBAL_SDRAM_LIMIT-1) & ORxS_SDAM_MSK) |\
+#define CONFIG_SYS_OR1_9COL    ((~(CONFIG_SYS_GLOBAL_SDRAM_LIMIT-1) & ORxS_SDAM_MSK) |\
 			 ORxS_BPD_4                     |\
 			 ORxS_ROWST_PBI1_A5             |\
 			 ORxS_NUMR_13)
 
-#define CFG_PSDMR_9COL  (PSDMR_PBI                      |\
+#define CONFIG_SYS_PSDMR_9COL  (PSDMR_PBI                      |\
 			 PSDMR_SDAM_A16_IS_A5           |\
 			 PSDMR_BSMA_A12_A14             |\
 			 PSDMR_SDA10_PBI1_A7            |\
@@ -714,12 +713,12 @@
 			 PSDMR_BUFCMD			|\
 			 PSDMR_CL_2)
 
-#define CFG_OR1_10COL    ((~(CFG_GLOBAL_SDRAM_LIMIT-1) & ORxS_SDAM_MSK) |\
+#define CONFIG_SYS_OR1_10COL    ((~(CONFIG_SYS_GLOBAL_SDRAM_LIMIT-1) & ORxS_SDAM_MSK) |\
 			 ORxS_BPD_4                     |\
 			 ORxS_ROWST_PBI1_A4             |\
 			 ORxS_NUMR_13)
 
-#define CFG_PSDMR_10COL  (PSDMR_PBI                      |\
+#define CONFIG_SYS_PSDMR_10COL  (PSDMR_PBI                      |\
 			 PSDMR_SDAM_A17_IS_A5           |\
 			 PSDMR_BSMA_A12_A14             |\
 			 PSDMR_SDA10_PBI1_A4            |\
@@ -760,6 +759,6 @@
 #define PSDMR_BUFCMD_100MHZ_60X         0x00000000  /* PSDMR[BUFCMD] at 100 MHz 60x mode */
 #define PSDMR_BUFCMD_DEFAULT            PSDMR_BUFCMD_133MHZ_SINGLE  /* PSDMR[BUFCMD] default value */
 
-#endif /* CFG_RAMBOOT */
+#endif /* CONFIG_SYS_RAMBOOT */
 
 #endif	/* __CONFIG_H */
diff --git a/include/configs/TQM834x.h b/include/configs/TQM834x.h
index e8f69f6dc..796030d06 100644
--- a/include/configs/TQM834x.h
+++ b/include/configs/TQM834x.h
@@ -38,7 +38,7 @@
 #define CONFIG_TQM834X		1	/* TQM834X board specific */
 
 /* IMMR Base Addres Register, use Freescale default: 0xff400000 */
-#define CFG_IMMR		0xff400000
+#define CONFIG_SYS_IMMR		0xff400000
 
 /* System clock. Primary input clock when in PCI host mode */
 #define CONFIG_83XX_CLKIN	66666000	/* 66,666 MHz */
@@ -52,7 +52,7 @@
  * External Local Bus rate is
  *    CLKIN * HRCWL_CSB_TO_CLKIN / HRCWL_LCL_BUS_TO_SCB_CLK / LCRR_CLKDIV
  */
-#define CFG_LCRR		(LCRR_DBYP | LCRR_CLKDIV_8)
+#define CONFIG_SYS_LCRR		(LCRR_DBYP | LCRR_CLKDIV_8)
 
 /* board pre init: do not call, nothing to do */
 #undef CONFIG_BOARD_EARLY_INIT_F
@@ -63,141 +63,140 @@
 /*
  * DDR Setup
  */
-#define CFG_DDR_BASE		0x00000000	/* DDR is system memory*/
-#define CFG_SDRAM_BASE		CFG_DDR_BASE
-#define CFG_DDR_SDRAM_BASE	CFG_DDR_BASE
+#define CONFIG_SYS_DDR_BASE		0x00000000	/* DDR is system memory*/
+#define CONFIG_SYS_SDRAM_BASE		CONFIG_SYS_DDR_BASE
+#define CONFIG_SYS_DDR_SDRAM_BASE	CONFIG_SYS_DDR_BASE
 #define DDR_CASLAT_25				/* CASLAT set to 2.5 */
 #undef CONFIG_DDR_ECC				/* only for ECC DDR module */
 #undef CONFIG_SPD_EEPROM			/* do not use SPD EEPROM for DDR setup */
 
-#undef CFG_DRAM_TEST				/* memory test, takes time */
-#define CFG_MEMTEST_START	0x00000000	/* memtest region */
-#define CFG_MEMTEST_END		0x00100000
+#undef CONFIG_SYS_DRAM_TEST				/* memory test, takes time */
+#define CONFIG_SYS_MEMTEST_START	0x00000000	/* memtest region */
+#define CONFIG_SYS_MEMTEST_END		0x00100000
 
 /*
  * FLASH on the Local Bus
  */
-#define CFG_FLASH_CFI				/* use the Common Flash Interface */
+#define CONFIG_SYS_FLASH_CFI				/* use the Common Flash Interface */
 #define CONFIG_FLASH_CFI_DRIVER			/* use the CFI driver */
-#undef CFG_FLASH_CHECKSUM
-#define CFG_FLASH_BASE		0x80000000	/* start of FLASH   */
-#define CFG_FLASH_SIZE		8		/* FLASH size in MB */
+#undef CONFIG_SYS_FLASH_CHECKSUM
+#define CONFIG_SYS_FLASH_BASE		0x80000000	/* start of FLASH   */
+#define CONFIG_SYS_FLASH_SIZE		8		/* FLASH size in MB */
 
 /* buffered writes in the AMD chip set is not supported yet */
-#undef CFG_FLASH_USE_BUFFER_WRITE
+#undef CONFIG_SYS_FLASH_USE_BUFFER_WRITE
 
 /*
  * FLASH bank number detection
  */
 
 /*
- * When CFG_MAX_FLASH_BANKS_DETECT is defined, the actual number of Flash
+ * When CONFIG_SYS_MAX_FLASH_BANKS_DETECT is defined, the actual number of Flash
  * banks has to be determined at runtime and stored in a gloabl variable
- * tqm834x_num_flash_banks. The value of CFG_MAX_FLASH_BANKS_DETECT is only
- * used instead of CFG_MAX_FLASH_BANKS to allocate the array flash_info, and
+ * tqm834x_num_flash_banks. The value of CONFIG_SYS_MAX_FLASH_BANKS_DETECT is only
+ * used instead of CONFIG_SYS_MAX_FLASH_BANKS to allocate the array flash_info, and
  * should be made sufficiently large to accomodate the number of banks that
  * might actually be detected.  Since most (all?) Flash related functions use
- * CFG_MAX_FLASH_BANKS as the number of actual banks on the board, it is
+ * CONFIG_SYS_MAX_FLASH_BANKS as the number of actual banks on the board, it is
  * defined as tqm834x_num_flash_banks.
  */
-#define CFG_MAX_FLASH_BANKS_DETECT	2
+#define CONFIG_SYS_MAX_FLASH_BANKS_DETECT	2
 #ifndef __ASSEMBLY__
 extern int tqm834x_num_flash_banks;
 #endif
-#define CFG_MAX_FLASH_BANKS (tqm834x_num_flash_banks)
+#define CONFIG_SYS_MAX_FLASH_BANKS (tqm834x_num_flash_banks)
 
-#define CFG_MAX_FLASH_SECT		512	/* max sectors per device */
+#define CONFIG_SYS_MAX_FLASH_SECT		512	/* max sectors per device */
 
 /* 32 bit device at 0x80000000 via GPCM (0x8000_1801) */
-#define CFG_BR0_PRELIM		((CFG_FLASH_BASE & BR_BA) | \
+#define CONFIG_SYS_BR0_PRELIM		((CONFIG_SYS_FLASH_BASE & BR_BA) | \
 					BR_MS_GPCM | BR_PS_32 | BR_V)
 
 /* FLASH timing (0x0000_0c54) */
-#define CFG_OR_TIMING_FLASH	(OR_GPCM_CSNT | OR_GPCM_ACS_DIV4 | \
+#define CONFIG_SYS_OR_TIMING_FLASH	(OR_GPCM_CSNT | OR_GPCM_ACS_DIV4 | \
 					OR_GPCM_SCY_5 | OR_GPCM_TRLX)
 
-#define CFG_PRELIM_OR_AM	0xc0000000	/* OR addr mask: 1 GiB */
+#define CONFIG_SYS_PRELIM_OR_AM	0xc0000000	/* OR addr mask: 1 GiB */
 
-#define CFG_OR0_PRELIM		(CFG_PRELIM_OR_AM  | CFG_OR_TIMING_FLASH)
+#define CONFIG_SYS_OR0_PRELIM		(CONFIG_SYS_PRELIM_OR_AM  | CONFIG_SYS_OR_TIMING_FLASH)
 
-#define CFG_LBLAWAR0_PRELIM	0x8000001D	/* 1 GiB window size (2^(size + 1)) */
+#define CONFIG_SYS_LBLAWAR0_PRELIM	0x8000001D	/* 1 GiB window size (2^(size + 1)) */
 
-#define CFG_LBLAWBAR0_PRELIM	CFG_FLASH_BASE	/* Window base at flash base */
+#define CONFIG_SYS_LBLAWBAR0_PRELIM	CONFIG_SYS_FLASH_BASE	/* Window base at flash base */
 
 /* disable remaining mappings */
-#define CFG_BR1_PRELIM		0x00000000
-#define CFG_OR1_PRELIM		0x00000000
-#define CFG_LBLAWBAR1_PRELIM	0x00000000
-#define CFG_LBLAWAR1_PRELIM	0x00000000
-
-#define CFG_BR2_PRELIM		0x00000000
-#define CFG_OR2_PRELIM		0x00000000
-#define CFG_LBLAWBAR2_PRELIM	0x00000000
-#define CFG_LBLAWAR2_PRELIM	0x00000000
-
-#define CFG_BR3_PRELIM		0x00000000
-#define CFG_OR3_PRELIM		0x00000000
-#define CFG_LBLAWBAR3_PRELIM	0x00000000
-#define CFG_LBLAWAR3_PRELIM	0x00000000
-
-#define CFG_BR4_PRELIM		0x00000000
-#define CFG_OR4_PRELIM		0x00000000
-#define CFG_LBLAWBAR4_PRELIM	0x00000000
-#define CFG_LBLAWAR4_PRELIM	0x00000000
-
-#define CFG_BR5_PRELIM		0x00000000
-#define CFG_OR5_PRELIM		0x00000000
-#define CFG_LBLAWBAR5_PRELIM	0x00000000
-#define CFG_LBLAWAR5_PRELIM	0x00000000
-
-#define CFG_BR6_PRELIM		0x00000000
-#define CFG_OR6_PRELIM		0x00000000
-#define CFG_LBLAWBAR6_PRELIM	0x00000000
-#define CFG_LBLAWAR6_PRELIM	0x00000000
-
-#define CFG_BR7_PRELIM		0x00000000
-#define CFG_OR7_PRELIM		0x00000000
-#define CFG_LBLAWBAR7_PRELIM	0x00000000
-#define CFG_LBLAWAR7_PRELIM	0x00000000
+#define CONFIG_SYS_BR1_PRELIM		0x00000000
+#define CONFIG_SYS_OR1_PRELIM		0x00000000
+#define CONFIG_SYS_LBLAWBAR1_PRELIM	0x00000000
+#define CONFIG_SYS_LBLAWAR1_PRELIM	0x00000000
+
+#define CONFIG_SYS_BR2_PRELIM		0x00000000
+#define CONFIG_SYS_OR2_PRELIM		0x00000000
+#define CONFIG_SYS_LBLAWBAR2_PRELIM	0x00000000
+#define CONFIG_SYS_LBLAWAR2_PRELIM	0x00000000
+
+#define CONFIG_SYS_BR3_PRELIM		0x00000000
+#define CONFIG_SYS_OR3_PRELIM		0x00000000
+#define CONFIG_SYS_LBLAWBAR3_PRELIM	0x00000000
+#define CONFIG_SYS_LBLAWAR3_PRELIM	0x00000000
+
+#define CONFIG_SYS_BR4_PRELIM		0x00000000
+#define CONFIG_SYS_OR4_PRELIM		0x00000000
+#define CONFIG_SYS_LBLAWBAR4_PRELIM	0x00000000
+#define CONFIG_SYS_LBLAWAR4_PRELIM	0x00000000
+
+#define CONFIG_SYS_BR5_PRELIM		0x00000000
+#define CONFIG_SYS_OR5_PRELIM		0x00000000
+#define CONFIG_SYS_LBLAWBAR5_PRELIM	0x00000000
+#define CONFIG_SYS_LBLAWAR5_PRELIM	0x00000000
+
+#define CONFIG_SYS_BR6_PRELIM		0x00000000
+#define CONFIG_SYS_OR6_PRELIM		0x00000000
+#define CONFIG_SYS_LBLAWBAR6_PRELIM	0x00000000
+#define CONFIG_SYS_LBLAWAR6_PRELIM	0x00000000
+
+#define CONFIG_SYS_BR7_PRELIM		0x00000000
+#define CONFIG_SYS_OR7_PRELIM		0x00000000
+#define CONFIG_SYS_LBLAWBAR7_PRELIM	0x00000000
+#define CONFIG_SYS_LBLAWAR7_PRELIM	0x00000000
 
 /*
  * Monitor config
  */
-#define CFG_MONITOR_BASE	TEXT_BASE	/* start of monitor */
+#define CONFIG_SYS_MONITOR_BASE	TEXT_BASE	/* start of monitor */
 
-#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
-#define CFG_RAMBOOT
+#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
+#define CONFIG_SYS_RAMBOOT
 #else
-#undef  CFG_RAMBOOT
+#undef  CONFIG_SYS_RAMBOOT
 #endif
 
-#define CONFIG_L1_INIT_RAM
-#define CFG_INIT_RAM_LOCK	1
-#define CFG_INIT_RAM_ADDR	0x20000000	/* Initial RAM address */
-#define CFG_INIT_RAM_END	0x1000		/* End of used area in RAM*/
+#define CONFIG_SYS_INIT_RAM_LOCK	1
+#define CONFIG_SYS_INIT_RAM_ADDR	0x20000000	/* Initial RAM address */
+#define CONFIG_SYS_INIT_RAM_END	0x1000		/* End of used area in RAM*/
 
-#define CFG_GBL_DATA_SIZE	0x100		/* num bytes initial data */
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_GBL_DATA_SIZE	0x100		/* num bytes initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
-#define CFG_MONITOR_LEN		(256 * 1024) /* Reserve 256 kB for Mon */
-#define CFG_MALLOC_LEN		(256 * 1024) /* Reserve 256 kB for malloc */
+#define CONFIG_SYS_MONITOR_LEN		(256 * 1024) /* Reserve 256 kB for Mon */
+#define CONFIG_SYS_MALLOC_LEN		(256 * 1024) /* Reserve 256 kB for malloc */
 
 /*
  * Serial Port
  */
 #define CONFIG_CONS_INDEX	1
 #undef CONFIG_SERIAL_SOFTWARE_FIFO
-#define CFG_NS16550
-#define CFG_NS16550_SERIAL
-#define CFG_NS16550_REG_SIZE	1
-#define CFG_NS16550_CLK		get_bus_freq(0)
+#define CONFIG_SYS_NS16550
+#define CONFIG_SYS_NS16550_SERIAL
+#define CONFIG_SYS_NS16550_REG_SIZE	1
+#define CONFIG_SYS_NS16550_CLK		get_bus_freq(0)
 
-#define CFG_BAUDRATE_TABLE  \
+#define CONFIG_SYS_BAUDRATE_TABLE  \
 	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200}
 
-#define CFG_NS16550_COM1	(CFG_IMMR + 0x4500)
-#define CFG_NS16550_COM2	(CFG_IMMR + 0x4600)
+#define CONFIG_SYS_NS16550_COM1	(CONFIG_SYS_IMMR + 0x4500)
+#define CONFIG_SYS_NS16550_COM2	(CONFIG_SYS_IMMR + 0x4600)
 
 /*
  * I2C
@@ -205,28 +204,27 @@ extern int tqm834x_num_flash_banks;
 #define CONFIG_HARD_I2C				/* I2C with hardware support	*/
 #undef CONFIG_SOFT_I2C				/* I2C bit-banged		*/
 #define CONFIG_FSL_I2C
-#define CFG_I2C_SPEED			400000	/* I2C speed: 400KHz		*/
-#define CFG_I2C_SLAVE			0x7F	/* slave address		*/
-#define CFG_I2C_OFFSET			0x3000
+#define CONFIG_SYS_I2C_SPEED			400000	/* I2C speed: 400KHz		*/
+#define CONFIG_SYS_I2C_SLAVE			0x7F	/* slave address		*/
+#define CONFIG_SYS_I2C_OFFSET			0x3000
 
 /* I2C EEPROM, configuration for onboard EEPROMs 24C256 and 24C32 */
-#define CFG_I2C_EEPROM_ADDR		0x50	/* 1010000x			*/
-#define CFG_I2C_EEPROM_ADDR_LEN		2	/* 16 bit			*/
-#define CFG_EEPROM_PAGE_WRITE_BITS	5	/* 32 bytes per write		*/
-#define CFG_EEPROM_PAGE_WRITE_ENABLE
-#define CFG_EEPROM_PAGE_WRITE_DELAY_MS	12	/* 10ms +/- 20%			*/
-#define CFG_I2C_MULTI_EEPROMS		1       /* more than one eeprom		*/
+#define CONFIG_SYS_I2C_EEPROM_ADDR		0x50	/* 1010000x			*/
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN		2	/* 16 bit			*/
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS	5	/* 32 bytes per write		*/
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	12	/* 10ms +/- 20%			*/
+#define CONFIG_SYS_I2C_MULTI_EEPROMS		1       /* more than one eeprom		*/
 
 /* I2C RTC */
 #define CONFIG_RTC_DS1337			/* use ds1337 rtc via i2c	*/
-#define CFG_I2C_RTC_ADDR		0x68	/* at address 0x68		*/
+#define CONFIG_SYS_I2C_RTC_ADDR		0x68	/* at address 0x68		*/
 
 /* I2C SYSMON (LM75) */
 #define CONFIG_DTT_LM75			1	/* ON Semi's LM75		*/
 #define CONFIG_DTT_SENSORS		{0}	/* Sensor addresses		*/
-#define CFG_DTT_MAX_TEMP		70
-#define CFG_DTT_LOW_TEMP		-30
-#define CFG_DTT_HYSTERESIS		3
+#define CONFIG_SYS_DTT_MAX_TEMP		70
+#define CONFIG_SYS_DTT_LOW_TEMP		-30
+#define CONFIG_SYS_DTT_HYSTERESIS		3
 
 /*
  * TSEC
@@ -234,10 +232,10 @@ extern int tqm834x_num_flash_banks;
 #define CONFIG_TSEC_ENET		/* tsec ethernet support */
 #define CONFIG_MII
 
-#define CFG_TSEC1_OFFSET	0x24000
-#define CFG_TSEC1		(CFG_IMMR + CFG_TSEC1_OFFSET)
-#define CFG_TSEC2_OFFSET	0x25000
-#define CFG_TSEC2		(CFG_IMMR + CFG_TSEC2_OFFSET)
+#define CONFIG_SYS_TSEC1_OFFSET	0x24000
+#define CONFIG_SYS_TSEC1		(CONFIG_SYS_IMMR + CONFIG_SYS_TSEC1_OFFSET)
+#define CONFIG_SYS_TSEC2_OFFSET	0x25000
+#define CONFIG_SYS_TSEC2		(CONFIG_SYS_IMMR + CONFIG_SYS_TSEC2_OFFSET)
 
 #if defined(CONFIG_TSEC_ENET)
 
@@ -273,24 +271,24 @@ extern int tqm834x_num_flash_banks;
 #define CONFIG_PCI_SCAN_SHOW            /* show pci devices on startup */
 
 /* PCI1 host bridge */
-#define CFG_PCI1_MEM_BASE       0xc0000000
-#define CFG_PCI1_MEM_PHYS       CFG_PCI1_MEM_BASE
-#define CFG_PCI1_MEM_SIZE       0x20000000      /* 512M */
-#define CFG_PCI1_IO_BASE        0xe2000000
-#define CFG_PCI1_IO_PHYS        CFG_PCI1_IO_BASE
-#define CFG_PCI1_IO_SIZE        0x1000000       /* 16M */
+#define CONFIG_SYS_PCI1_MEM_BASE       0xc0000000
+#define CONFIG_SYS_PCI1_MEM_PHYS       CONFIG_SYS_PCI1_MEM_BASE
+#define CONFIG_SYS_PCI1_MEM_SIZE       0x20000000      /* 512M */
+#define CONFIG_SYS_PCI1_IO_BASE        0xe2000000
+#define CONFIG_SYS_PCI1_IO_PHYS        CONFIG_SYS_PCI1_IO_BASE
+#define CONFIG_SYS_PCI1_IO_SIZE        0x1000000       /* 16M */
 
 #undef CONFIG_EEPRO100
 #define CONFIG_EEPRO100
 #undef CONFIG_TULIP
 
 #if !defined(CONFIG_PCI_PNP)
-	#define PCI_ENET0_IOADDR	CFG_PCI1_IO_BASE
-	#define PCI_ENET0_MEMADDR	CFG_PCI1_MEM_BASE
+	#define PCI_ENET0_IOADDR	CONFIG_SYS_PCI1_IO_BASE
+	#define PCI_ENET0_MEMADDR	CONFIG_SYS_PCI1_MEM_BASE
 	#define PCI_IDSEL_NUMBER	0x1c    /* slot0 (IDSEL) = 28 */
 #endif
 
-#define CFG_PCI_SUBSYS_VENDORID		0x1957  /* Freescale */
+#define CONFIG_SYS_PCI_SUBSYS_VENDORID		0x1957  /* Freescale */
 
 #endif	/* CONFIG_PCI */
 
@@ -299,20 +297,20 @@ extern int tqm834x_num_flash_banks;
  */
 #define CONFIG_ENV_OVERWRITE
 
-#ifndef CFG_RAMBOOT
-	#define CFG_ENV_IS_IN_FLASH	1
-	#define CFG_ENV_ADDR		(CFG_MONITOR_BASE + 0x40000)
-	#define CFG_ENV_SECT_SIZE	0x40000	/* 256K(one sector) for env */
-	#define CFG_ENV_SIZE		0x2000
+#ifndef CONFIG_SYS_RAMBOOT
+	#define CONFIG_ENV_IS_IN_FLASH	1
+	#define CONFIG_ENV_ADDR		(CONFIG_SYS_MONITOR_BASE + 0x40000)
+	#define CONFIG_ENV_SECT_SIZE	0x40000	/* 256K(one sector) for env */
+	#define CONFIG_ENV_SIZE		0x2000
 #else
-	#define CFG_NO_FLASH		1	/* Flash is not usable now */
-	#define CFG_ENV_IS_NOWHERE	1	/* Store ENV in memory only */
-	#define CFG_ENV_ADDR		(CFG_MONITOR_BASE - 0x1000)
-	#define CFG_ENV_SIZE		0x2000
+	#define CONFIG_SYS_NO_FLASH		1	/* Flash is not usable now */
+	#define CONFIG_ENV_IS_NOWHERE	1	/* Store ENV in memory only */
+	#define CONFIG_ENV_ADDR		(CONFIG_SYS_MONITOR_BASE - 0x1000)
+	#define CONFIG_ENV_SIZE		0x2000
 #endif
 
 #define CONFIG_LOADS_ECHO		1	/* echo on for serial download */
-#define CFG_LOADS_BAUD_CHANGE		1	/* allow baudrate change */
+#define CONFIG_SYS_LOADS_BAUD_CHANGE		1	/* allow baudrate change */
 
 /*
  * BOOTP options
@@ -341,7 +339,7 @@ extern int tqm834x_num_flash_banks;
     #define CONFIG_CMD_PCI
 #endif
 
-#if defined(CFG_RAMBOOT)
+#if defined(CONFIG_SYS_RAMBOOT)
     #undef CONFIG_CMD_ENV
     #undef CONFIG_CMD_LOADS
 #endif
@@ -349,26 +347,26 @@ extern int tqm834x_num_flash_banks;
 /*
  * Miscellaneous configurable options
  */
-#define CFG_LONGHELP				/* undef to save memory	*/
-#define CFG_LOAD_ADDR		0x2000000	/* default load address */
-#define CFG_PROMPT		"=> "		/* Monitor Command Prompt */
+#define CONFIG_SYS_LONGHELP				/* undef to save memory	*/
+#define CONFIG_SYS_LOAD_ADDR		0x2000000	/* default load address */
+#define CONFIG_SYS_PROMPT		"=> "		/* Monitor Command Prompt */
 
 #define CONFIG_CMDLINE_EDITING	1	/* add command line history	*/
-#define CFG_HUSH_PARSER		1	/* Use the HUSH parser		*/
-#ifdef	CFG_HUSH_PARSER
-#define	CFG_PROMPT_HUSH_PS2	"> "
+#define CONFIG_SYS_HUSH_PARSER		1	/* Use the HUSH parser		*/
+#ifdef	CONFIG_SYS_HUSH_PARSER
+#define	CONFIG_SYS_PROMPT_HUSH_PS2	"> "
 #endif
 
 #if defined(CONFIG_CMD_KGDB)
-	#define CFG_CBSIZE	1024		/* Console I/O Buffer Size */
+	#define CONFIG_SYS_CBSIZE	1024		/* Console I/O Buffer Size */
 #else
-	#define CFG_CBSIZE	256		/* Console I/O Buffer Size */
+	#define CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size */
 #endif
 
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define CFG_MAXARGS		16		/* max number of command args */
-#define CFG_BARGSIZE		CFG_CBSIZE	/* Boot Argument Buffer Size */
-#define CFG_HZ			1000		/* decrementer freq: 1ms ticks */
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS		16		/* max number of command args */
+#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size */
+#define CONFIG_SYS_HZ			1000		/* decrementer freq: 1ms ticks */
 
 #undef CONFIG_WATCHDOG				/* watchdog disabled */
 
@@ -377,9 +375,9 @@ extern int tqm834x_num_flash_banks;
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define CFG_BOOTMAPSZ	(8 << 20)	/* Initial Memory map for Linux*/
+#define CONFIG_SYS_BOOTMAPSZ	(8 << 20)	/* Initial Memory map for Linux*/
 
-#define CFG_HRCW_LOW (\
+#define CONFIG_SYS_HRCW_LOW (\
 	HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\
 	HRCWL_DDR_TO_SCB_CLK_1X1 |\
 	HRCWL_CSB_TO_CLKIN_4X1 |\
@@ -387,7 +385,7 @@ extern int tqm834x_num_flash_banks;
 	HRCWL_CORE_TO_CSB_2X1)
 
 #if defined(PCI_64BIT)
-#define CFG_HRCW_HIGH (\
+#define CONFIG_SYS_HRCW_HIGH (\
 	HRCWH_PCI_HOST |\
 	HRCWH_64_BIT_PCI |\
 	HRCWH_PCI1_ARBITER_ENABLE |\
@@ -400,7 +398,7 @@ extern int tqm834x_num_flash_banks;
 	HRCWH_TSEC1M_IN_GMII |\
 	HRCWH_TSEC2M_IN_GMII )
 #else
-#define CFG_HRCW_HIGH (\
+#define CONFIG_SYS_HRCW_HIGH (\
 	HRCWH_PCI_HOST |\
 	HRCWH_32_BIT_PCI |\
 	HRCWH_PCI1_ARBITER_ENABLE |\
@@ -415,67 +413,67 @@ extern int tqm834x_num_flash_banks;
 #endif
 
 /* System IO Config */
-#define CFG_SICRH	SICRH_TSOBI1
-#define CFG_SICRL	SICRL_LDP_A
+#define CONFIG_SYS_SICRH	SICRH_TSOBI1
+#define CONFIG_SYS_SICRL	SICRL_LDP_A
 
 /* i-cache and d-cache disabled */
-#define CFG_HID0_INIT	0x000000000
-#define CFG_HID0_FINAL	CFG_HID0_INIT
-#define CFG_HID2	HID2_HBE
+#define CONFIG_SYS_HID0_INIT	0x000000000
+#define CONFIG_SYS_HID0_FINAL	CONFIG_SYS_HID0_INIT
+#define CONFIG_SYS_HID2	HID2_HBE
 
 #define CONFIG_HIGH_BATS	1	/* High BATs supported */
 
 /* DDR 0 - 512M */
-#define CFG_IBAT0L	(CFG_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
-#define CFG_IBAT0U	(CFG_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
-#define CFG_IBAT1L	(CFG_SDRAM_BASE + 0x10000000 | BATL_PP_10 | BATL_MEMCOHERENCE)
-#define CFG_IBAT1U	(CFG_SDRAM_BASE + 0x10000000 | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CONFIG_SYS_IBAT0L	(CONFIG_SYS_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
+#define CONFIG_SYS_IBAT0U	(CONFIG_SYS_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CONFIG_SYS_IBAT1L	(CONFIG_SYS_SDRAM_BASE + 0x10000000 | BATL_PP_10 | BATL_MEMCOHERENCE)
+#define CONFIG_SYS_IBAT1U	(CONFIG_SYS_SDRAM_BASE + 0x10000000 | BATU_BL_256M | BATU_VS | BATU_VP)
 
 /* stack in DCACHE @ 512M (no backing mem) */
-#define CFG_IBAT2L	(CFG_INIT_RAM_ADDR | BATL_PP_10 | BATL_MEMCOHERENCE)
-#define CFG_IBAT2U	(CFG_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP)
+#define CONFIG_SYS_IBAT2L	(CONFIG_SYS_INIT_RAM_ADDR | BATL_PP_10 | BATL_MEMCOHERENCE)
+#define CONFIG_SYS_IBAT2U	(CONFIG_SYS_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP)
 
 /* PCI */
 #ifdef CONFIG_PCI
-#define CFG_IBAT3L	(CFG_PCI1_MEM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
-#define CFG_IBAT3U	(CFG_PCI1_MEM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
-#define CFG_IBAT4L	(CFG_PCI1_MEM_BASE + 0x10000000 | BATL_PP_10 | BATL_MEMCOHERENCE)
-#define CFG_IBAT4U	(CFG_PCI1_MEM_BASE + 0x10000000 | BATU_BL_256M | BATU_VS | BATU_VP)
-#define CFG_IBAT5L	(CFG_PCI1_IO_BASE | BATL_PP_10 | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
-#define CFG_IBAT5U	(CFG_PCI1_IO_BASE + 0x10000000 | BATU_BL_16M | BATU_VS | BATU_VP)
+#define CONFIG_SYS_IBAT3L	(CONFIG_SYS_PCI1_MEM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
+#define CONFIG_SYS_IBAT3U	(CONFIG_SYS_PCI1_MEM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CONFIG_SYS_IBAT4L	(CONFIG_SYS_PCI1_MEM_BASE + 0x10000000 | BATL_PP_10 | BATL_MEMCOHERENCE)
+#define CONFIG_SYS_IBAT4U	(CONFIG_SYS_PCI1_MEM_BASE + 0x10000000 | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CONFIG_SYS_IBAT5L	(CONFIG_SYS_PCI1_IO_BASE | BATL_PP_10 | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
+#define CONFIG_SYS_IBAT5U	(CONFIG_SYS_PCI1_IO_BASE + 0x10000000 | BATU_BL_16M | BATU_VS | BATU_VP)
 #else
-#define CFG_IBAT3L	(0)
-#define CFG_IBAT3U	(0)
-#define CFG_IBAT4L	(0)
-#define CFG_IBAT4U	(0)
-#define CFG_IBAT5L	(0)
-#define CFG_IBAT5U	(0)
+#define CONFIG_SYS_IBAT3L	(0)
+#define CONFIG_SYS_IBAT3U	(0)
+#define CONFIG_SYS_IBAT4L	(0)
+#define CONFIG_SYS_IBAT4U	(0)
+#define CONFIG_SYS_IBAT5L	(0)
+#define CONFIG_SYS_IBAT5U	(0)
 #endif
 
 /* IMMRBAR */
-#define CFG_IBAT6L	(CFG_IMMR | BATL_PP_10 | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
-#define CFG_IBAT6U	(CFG_IMMR | BATU_BL_1M | BATU_VS | BATU_VP)
+#define CONFIG_SYS_IBAT6L	(CONFIG_SYS_IMMR | BATL_PP_10 | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
+#define CONFIG_SYS_IBAT6U	(CONFIG_SYS_IMMR | BATU_BL_1M | BATU_VS | BATU_VP)
 
 /* FLASH */
-#define CFG_IBAT7L	(CFG_FLASH_BASE | BATL_PP_10 | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
-#define CFG_IBAT7U	(CFG_FLASH_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
-
-#define CFG_DBAT0L	CFG_IBAT0L
-#define CFG_DBAT0U	CFG_IBAT0U
-#define CFG_DBAT1L	CFG_IBAT1L
-#define CFG_DBAT1U	CFG_IBAT1U
-#define CFG_DBAT2L	CFG_IBAT2L
-#define CFG_DBAT2U	CFG_IBAT2U
-#define CFG_DBAT3L	CFG_IBAT3L
-#define CFG_DBAT3U	CFG_IBAT3U
-#define CFG_DBAT4L	CFG_IBAT4L
-#define CFG_DBAT4U	CFG_IBAT4U
-#define CFG_DBAT5L	CFG_IBAT5L
-#define CFG_DBAT5U	CFG_IBAT5U
-#define CFG_DBAT6L	CFG_IBAT6L
-#define CFG_DBAT6U	CFG_IBAT6U
-#define CFG_DBAT7L	CFG_IBAT7L
-#define CFG_DBAT7U	CFG_IBAT7U
+#define CONFIG_SYS_IBAT7L	(CONFIG_SYS_FLASH_BASE | BATL_PP_10 | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
+#define CONFIG_SYS_IBAT7U	(CONFIG_SYS_FLASH_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
+
+#define CONFIG_SYS_DBAT0L	CONFIG_SYS_IBAT0L
+#define CONFIG_SYS_DBAT0U	CONFIG_SYS_IBAT0U
+#define CONFIG_SYS_DBAT1L	CONFIG_SYS_IBAT1L
+#define CONFIG_SYS_DBAT1U	CONFIG_SYS_IBAT1U
+#define CONFIG_SYS_DBAT2L	CONFIG_SYS_IBAT2L
+#define CONFIG_SYS_DBAT2U	CONFIG_SYS_IBAT2U
+#define CONFIG_SYS_DBAT3L	CONFIG_SYS_IBAT3L
+#define CONFIG_SYS_DBAT3U	CONFIG_SYS_IBAT3U
+#define CONFIG_SYS_DBAT4L	CONFIG_SYS_IBAT4L
+#define CONFIG_SYS_DBAT4U	CONFIG_SYS_IBAT4U
+#define CONFIG_SYS_DBAT5L	CONFIG_SYS_IBAT5L
+#define CONFIG_SYS_DBAT5U	CONFIG_SYS_IBAT5U
+#define CONFIG_SYS_DBAT6L	CONFIG_SYS_IBAT6L
+#define CONFIG_SYS_DBAT6U	CONFIG_SYS_IBAT6U
+#define CONFIG_SYS_DBAT7L	CONFIG_SYS_IBAT7L
+#define CONFIG_SYS_DBAT7U	CONFIG_SYS_IBAT7U
 
 /*
  * Internal Definitions
diff --git a/include/configs/TQM850L.h b/include/configs/TQM850L.h
index 388fafc55..4aa8db824 100644
--- a/include/configs/TQM850L.h
+++ b/include/configs/TQM850L.h
@@ -80,7 +80,7 @@
 #define CONFIG_BOOTCOMMAND	"run flash_self"
 
 #define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
-#undef	CFG_LOADS_BAUD_CHANGE		/* don't allow baudrate change	*/
+#undef	CONFIG_SYS_LOADS_BAUD_CHANGE		/* don't allow baudrate change	*/
 
 #undef	CONFIG_WATCHDOG			/* watchdog disabled		*/
 
@@ -123,32 +123,32 @@
 /*
  * Miscellaneous configurable options
  */
-#define	CFG_LONGHELP			/* undef to save memory		*/
-#define	CFG_PROMPT		"=> "	/* Monitor Command Prompt	*/
+#define	CONFIG_SYS_LONGHELP			/* undef to save memory		*/
+#define	CONFIG_SYS_PROMPT		"=> "	/* Monitor Command Prompt	*/
 
 #define CONFIG_CMDLINE_EDITING	1	/* add command line history	*/
-#define CFG_HUSH_PARSER		1	/* Use the HUSH parser		*/
-#ifdef	CFG_HUSH_PARSER
-#define	CFG_PROMPT_HUSH_PS2	"> "
+#define CONFIG_SYS_HUSH_PARSER		1	/* Use the HUSH parser		*/
+#ifdef	CONFIG_SYS_HUSH_PARSER
+#define	CONFIG_SYS_PROMPT_HUSH_PS2	"> "
 #endif
 
 #if defined(CONFIG_CMD_KGDB)
-#define	CFG_CBSIZE		1024	/* Console I/O Buffer Size	*/
+#define	CONFIG_SYS_CBSIZE		1024	/* Console I/O Buffer Size	*/
 #else
-#define	CFG_CBSIZE		256	/* Console I/O Buffer Size	*/
+#define	CONFIG_SYS_CBSIZE		256	/* Console I/O Buffer Size	*/
 #endif
-#define	CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define	CFG_MAXARGS		16	/* max number of command args	*/
-#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+#define	CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define	CONFIG_SYS_MAXARGS		16	/* max number of command args	*/
+#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
 
-#define CFG_MEMTEST_START	0x0400000	/* memtest works on	*/
-#define CFG_MEMTEST_END		0x0C00000	/* 4 ... 12 MB in DRAM	*/
+#define CONFIG_SYS_MEMTEST_START	0x0400000	/* memtest works on	*/
+#define CONFIG_SYS_MEMTEST_END		0x0C00000	/* 4 ... 12 MB in DRAM	*/
 
-#define	CFG_LOAD_ADDR		0x100000	/* default load address	*/
+#define	CONFIG_SYS_LOAD_ADDR		0x100000	/* default load address	*/
 
-#define	CFG_HZ			1000	/* decrementer freq: 1 ms ticks	*/
+#define	CONFIG_SYS_HZ			1000	/* decrementer freq: 1 ms ticks	*/
 
-#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
 
 /*
  * Low Level Configuration Settings
@@ -158,57 +158,59 @@
 /*-----------------------------------------------------------------------
  * Internal Memory Mapped Register
  */
-#define CFG_IMMR		0xFFF00000
+#define CONFIG_SYS_IMMR		0xFFF00000
 
 /*-----------------------------------------------------------------------
  * Definitions for initial stack pointer and data area (in DPRAM)
  */
-#define CFG_INIT_RAM_ADDR	CFG_IMMR
-#define	CFG_INIT_RAM_END	0x2F00	/* End of used area in DPRAM	*/
-#define	CFG_GBL_DATA_SIZE	64  /* size in bytes reserved for initial data */
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define	CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_IMMR
+#define	CONFIG_SYS_INIT_RAM_END	0x2F00	/* End of used area in DPRAM	*/
+#define	CONFIG_SYS_GBL_DATA_SIZE	64  /* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define	CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
 /*-----------------------------------------------------------------------
  * Start addresses for the final memory configuration
  * (Set up by the startup code)
- * Please note that CFG_SDRAM_BASE _must_ start at 0
+ * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
  */
-#define	CFG_SDRAM_BASE		0x00000000
-#define CFG_FLASH_BASE		0x40000000
-#define	CFG_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor	*/
-#define CFG_MONITOR_BASE	CFG_FLASH_BASE
-#define	CFG_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/
+#define	CONFIG_SYS_SDRAM_BASE		0x00000000
+#define CONFIG_SYS_FLASH_BASE		0x40000000
+#define	CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor	*/
+#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_FLASH_BASE
+#define	CONFIG_SYS_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/
 
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define	CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux	*/
+#define	CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux	*/
 
 /*-----------------------------------------------------------------------
  * FLASH organization
  */
 
 /* use CFI flash driver */
-#define CFG_FLASH_CFI		1	/* Flash is CFI conformant */
+#define CONFIG_SYS_FLASH_CFI		1	/* Flash is CFI conformant */
 #define CONFIG_FLASH_CFI_DRIVER	1	/* Use the common driver */
-#define CFG_FLASH_BANKS_LIST	{ CFG_FLASH_BASE, CFG_FLASH_BASE+flash_info[0].size }
-#define CFG_FLASH_EMPTY_INFO
-#define CFG_FLASH_USE_BUFFER_WRITE	1
-#define CFG_MAX_FLASH_BANKS	2	/* max number of memory banks */
-#define CFG_MAX_FLASH_SECT	71	/* max number of sectors on one chip */
+#define CONFIG_SYS_FLASH_BANKS_LIST	{ CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE+flash_info[0].size }
+#define CONFIG_SYS_FLASH_EMPTY_INFO
+#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE	1
+#define CONFIG_SYS_MAX_FLASH_BANKS	2	/* max number of memory banks */
+#define CONFIG_SYS_MAX_FLASH_SECT	71	/* max number of sectors on one chip */
 
-#define	CFG_ENV_IS_IN_FLASH	1
-#define	CFG_ENV_OFFSET		0x8000	/*   Offset   of Environment Sector	*/
-#define	CFG_ENV_SIZE		0x4000	/* Total Size of Environment Sector	*/
+#define	CONFIG_ENV_IS_IN_FLASH	1
+#define	CONFIG_ENV_OFFSET		0x8000	/*   Offset   of Environment Sector	*/
+#define	CONFIG_ENV_SIZE		0x4000	/* Total Size of Environment Sector	*/
 
 /* Address and size of Redundant Environment Sector	*/
-#define CFG_ENV_OFFSET_REDUND	(CFG_ENV_OFFSET+CFG_ENV_SIZE)
-#define CFG_ENV_SIZE_REDUND	(CFG_ENV_SIZE)
+#define CONFIG_ENV_OFFSET_REDUND	(CONFIG_ENV_OFFSET+CONFIG_ENV_SIZE)
+#define CONFIG_ENV_SIZE_REDUND	(CONFIG_ENV_SIZE)
 
-#define	CFG_USE_PPCENV			/* Environment embedded in sect .ppcenv */
+#define	CONFIG_SYS_USE_PPCENV			/* Environment embedded in sect .ppcenv */
+
+#define CONFIG_MISC_INIT_R		/* Make sure to remap flashes correctly */
 
 /*-----------------------------------------------------------------------
  * Dynamic MTD partition support
@@ -225,16 +227,16 @@
 /*-----------------------------------------------------------------------
  * Hardware Information Block
  */
-#define CFG_HWINFO_OFFSET	0x0003FFC0	/* offset of HW Info block */
-#define CFG_HWINFO_SIZE		0x00000040	/* size   of HW Info block */
-#define CFG_HWINFO_MAGIC	0x54514D38	/* 'TQM8' */
+#define CONFIG_SYS_HWINFO_OFFSET	0x0003FFC0	/* offset of HW Info block */
+#define CONFIG_SYS_HWINFO_SIZE		0x00000040	/* size   of HW Info block */
+#define CONFIG_SYS_HWINFO_MAGIC	0x54514D38	/* 'TQM8' */
 
 /*-----------------------------------------------------------------------
  * Cache Configuration
  */
-#define CFG_CACHELINE_SIZE	16	/* For all MPC8xx CPUs			*/
+#define CONFIG_SYS_CACHELINE_SIZE	16	/* For all MPC8xx CPUs			*/
 #if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT	4	/* log base 2 of the above value	*/
+#define CONFIG_SYS_CACHELINE_SHIFT	4	/* log base 2 of the above value	*/
 #endif
 
 /*-----------------------------------------------------------------------
@@ -244,10 +246,10 @@
  * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze
  */
 #if defined(CONFIG_WATCHDOG)
-#define CFG_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
+#define CONFIG_SYS_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
 			 SYPCR_SWE  | SYPCR_SWRI| SYPCR_SWP)
 #else
-#define CFG_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
+#define CONFIG_SYS_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
 #endif
 
 /*-----------------------------------------------------------------------
@@ -256,9 +258,9 @@
  * PCMCIA config., multi-function pin tri-state
  */
 #ifndef	CONFIG_CAN_DRIVER
-#define CFG_SIUMCR	(SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_MLRC01)
+#define CONFIG_SYS_SIUMCR	(SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_MLRC01)
 #else	/* we must activate GPL5 in the SIUMCR for CAN */
-#define CFG_SIUMCR	(SIUMCR_DBGC11 | SIUMCR_DBPC00 | SIUMCR_MLRC01)
+#define CONFIG_SYS_SIUMCR	(SIUMCR_DBGC11 | SIUMCR_DBPC00 | SIUMCR_MLRC01)
 #endif	/* CONFIG_CAN_DRIVER */
 
 /*-----------------------------------------------------------------------
@@ -266,20 +268,20 @@
  *-----------------------------------------------------------------------
  * Clear Reference Interrupt Status, Timebase freezing enabled
  */
-#define CFG_TBSCR	(TBSCR_REFA | TBSCR_REFB | TBSCR_TBF)
+#define CONFIG_SYS_TBSCR	(TBSCR_REFA | TBSCR_REFB | TBSCR_TBF)
 
 /*-----------------------------------------------------------------------
  * RTCSC - Real-Time Clock Status and Control Register		11-27
  *-----------------------------------------------------------------------
  */
-#define CFG_RTCSC	(RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE)
+#define CONFIG_SYS_RTCSC	(RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE)
 
 /*-----------------------------------------------------------------------
  * PISCR - Periodic Interrupt Status and Control		11-31
  *-----------------------------------------------------------------------
  * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
  */
-#define CFG_PISCR	(PISCR_PS | PISCR_PITF)
+#define CONFIG_SYS_PISCR	(PISCR_PS | PISCR_PITF)
 
 /*-----------------------------------------------------------------------
  * PLPRCR - PLL, Low-Power, and Reset Control Register		15-30
@@ -287,7 +289,7 @@
  * Reset PLL lock status sticky bit, timer expired status bit and timer
  * interrupt status bit
  */
-#define CFG_PLPRCR	(PLPRCR_SPLSS | PLPRCR_TEXPS | PLPRCR_TMIST)
+#define CONFIG_SYS_PLPRCR	(PLPRCR_SPLSS | PLPRCR_TEXPS | PLPRCR_TMIST)
 
 /*-----------------------------------------------------------------------
  * SCCR - System Clock and reset Control Register		15-27
@@ -296,7 +298,7 @@
  * power management and some other internal clocks
  */
 #define SCCR_MASK	SCCR_EBDF11
-#define CFG_SCCR	(SCCR_COM00   | SCCR_DFSYNC00 | SCCR_DFBRG00  | \
+#define CONFIG_SYS_SCCR	(SCCR_COM00   | SCCR_DFSYNC00 | SCCR_DFBRG00  | \
 			 SCCR_DFNL000 | SCCR_DFNH000  | SCCR_DFLCD000 | \
 			 SCCR_DFALCD00)
 
@@ -305,14 +307,14 @@
  *-----------------------------------------------------------------------
  *
  */
-#define CFG_PCMCIA_MEM_ADDR	(0xE0000000)
-#define CFG_PCMCIA_MEM_SIZE	( 64 << 20 )
-#define CFG_PCMCIA_DMA_ADDR	(0xE4000000)
-#define CFG_PCMCIA_DMA_SIZE	( 64 << 20 )
-#define CFG_PCMCIA_ATTRB_ADDR	(0xE8000000)
-#define CFG_PCMCIA_ATTRB_SIZE	( 64 << 20 )
-#define CFG_PCMCIA_IO_ADDR	(0xEC000000)
-#define CFG_PCMCIA_IO_SIZE	( 64 << 20 )
+#define CONFIG_SYS_PCMCIA_MEM_ADDR	(0xE0000000)
+#define CONFIG_SYS_PCMCIA_MEM_SIZE	( 64 << 20 )
+#define CONFIG_SYS_PCMCIA_DMA_ADDR	(0xE4000000)
+#define CONFIG_SYS_PCMCIA_DMA_SIZE	( 64 << 20 )
+#define CONFIG_SYS_PCMCIA_ATTRB_ADDR	(0xE8000000)
+#define CONFIG_SYS_PCMCIA_ATTRB_SIZE	( 64 << 20 )
+#define CONFIG_SYS_PCMCIA_IO_ADDR	(0xEC000000)
+#define CONFIG_SYS_PCMCIA_IO_SIZE	( 64 << 20 )
 
 /*-----------------------------------------------------------------------
  * IDE/ATA stuff (Supports IDE harddisk on PCMCIA Adapter)
@@ -325,28 +327,28 @@
 #undef	CONFIG_IDE_LED			/* LED   for ide not supported	*/
 #undef	CONFIG_IDE_RESET		/* reset for ide not supported	*/
 
-#define CFG_IDE_MAXBUS		1	/* max. 1 IDE bus		*/
-#define CFG_IDE_MAXDEVICE	1	/* max. 1 drive per IDE bus	*/
+#define CONFIG_SYS_IDE_MAXBUS		1	/* max. 1 IDE bus		*/
+#define CONFIG_SYS_IDE_MAXDEVICE	1	/* max. 1 drive per IDE bus	*/
 
-#define CFG_ATA_IDE0_OFFSET	0x0000
+#define CONFIG_SYS_ATA_IDE0_OFFSET	0x0000
 
-#define CFG_ATA_BASE_ADDR	CFG_PCMCIA_MEM_ADDR
+#define CONFIG_SYS_ATA_BASE_ADDR	CONFIG_SYS_PCMCIA_MEM_ADDR
 
 /* Offset for data I/O			*/
-#define CFG_ATA_DATA_OFFSET	(CFG_PCMCIA_MEM_SIZE + 0x320)
+#define CONFIG_SYS_ATA_DATA_OFFSET	(CONFIG_SYS_PCMCIA_MEM_SIZE + 0x320)
 
 /* Offset for normal register accesses	*/
-#define CFG_ATA_REG_OFFSET	(2 * CFG_PCMCIA_MEM_SIZE + 0x320)
+#define CONFIG_SYS_ATA_REG_OFFSET	(2 * CONFIG_SYS_PCMCIA_MEM_SIZE + 0x320)
 
 /* Offset for alternate registers	*/
-#define CFG_ATA_ALT_OFFSET	0x0100
+#define CONFIG_SYS_ATA_ALT_OFFSET	0x0100
 
 /*-----------------------------------------------------------------------
  *
  *-----------------------------------------------------------------------
  *
  */
-#define CFG_DER	0
+#define CONFIG_SYS_DER	0
 
 /*
  * Init Memory Controller:
@@ -361,22 +363,22 @@
  * restrict access enough to keep SRAM working (if any)
  * but not too much to meddle with FLASH accesses
  */
-#define CFG_REMAP_OR_AM		0x80000000	/* OR addr mask */
-#define CFG_PRELIM_OR_AM	0xE0000000	/* OR addr mask */
+#define CONFIG_SYS_REMAP_OR_AM		0x80000000	/* OR addr mask */
+#define CONFIG_SYS_PRELIM_OR_AM	0xE0000000	/* OR addr mask */
 
 /*
  * FLASH timing:
  */
-#define CFG_OR_TIMING_FLASH	(OR_ACS_DIV1  | OR_TRLX | OR_CSNT_SAM | \
+#define CONFIG_SYS_OR_TIMING_FLASH	(OR_ACS_DIV1  | OR_TRLX | OR_CSNT_SAM | \
 				 OR_SCY_3_CLK | OR_EHTR | OR_BI)
 
-#define CFG_OR0_REMAP	(CFG_REMAP_OR_AM  | CFG_OR_TIMING_FLASH)
-#define CFG_OR0_PRELIM	(CFG_PRELIM_OR_AM | CFG_OR_TIMING_FLASH)
-#define CFG_BR0_PRELIM	((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_V )
+#define CONFIG_SYS_OR0_REMAP	(CONFIG_SYS_REMAP_OR_AM  | CONFIG_SYS_OR_TIMING_FLASH)
+#define CONFIG_SYS_OR0_PRELIM	(CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_FLASH)
+#define CONFIG_SYS_BR0_PRELIM	((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_V )
 
-#define CFG_OR1_REMAP	CFG_OR0_REMAP
-#define CFG_OR1_PRELIM	CFG_OR0_PRELIM
-#define CFG_BR1_PRELIM	((FLASH_BASE1_PRELIM & BR_BA_MSK) | BR_V )
+#define CONFIG_SYS_OR1_REMAP	CONFIG_SYS_OR0_REMAP
+#define CONFIG_SYS_OR1_PRELIM	CONFIG_SYS_OR0_PRELIM
+#define CONFIG_SYS_BR1_PRELIM	((FLASH_BASE1_PRELIM & BR_BA_MSK) | BR_V )
 
 /*
  * BR2/3 and OR2/3 (SDRAM)
@@ -387,19 +389,19 @@
 #define	SDRAM_MAX_SIZE		0x04000000	/* max 64 MB per bank	*/
 
 /* SDRAM timing: Multiplexed addresses, GPL5 output to GPL5_A (don't care)	*/
-#define CFG_OR_TIMING_SDRAM	0x00000A00
+#define CONFIG_SYS_OR_TIMING_SDRAM	0x00000A00
 
-#define CFG_OR2_PRELIM	(CFG_PRELIM_OR_AM | CFG_OR_TIMING_SDRAM )
-#define CFG_BR2_PRELIM	((SDRAM_BASE2_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
+#define CONFIG_SYS_OR2_PRELIM	(CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_SDRAM )
+#define CONFIG_SYS_BR2_PRELIM	((SDRAM_BASE2_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
 
 #ifndef	CONFIG_CAN_DRIVER
-#define	CFG_OR3_PRELIM	CFG_OR2_PRELIM
-#define CFG_BR3_PRELIM	((SDRAM_BASE3_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
+#define	CONFIG_SYS_OR3_PRELIM	CONFIG_SYS_OR2_PRELIM
+#define CONFIG_SYS_BR3_PRELIM	((SDRAM_BASE3_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
 #else	/* CAN uses CS3#, so we can have only one SDRAM bank anyway */
-#define	CFG_CAN_BASE		0xC0000000	/* CAN mapped at 0xC0000000	*/
-#define CFG_CAN_OR_AM		0xFFFF8000	/* 32 kB address mask		*/
-#define CFG_OR3_CAN		(CFG_CAN_OR_AM | OR_G5LA | OR_BI)
-#define CFG_BR3_CAN		((CFG_CAN_BASE & BR_BA_MSK) | \
+#define	CONFIG_SYS_CAN_BASE		0xC0000000	/* CAN mapped at 0xC0000000	*/
+#define CONFIG_SYS_CAN_OR_AM		0xFFFF8000	/* 32 kB address mask		*/
+#define CONFIG_SYS_OR3_CAN		(CONFIG_SYS_CAN_OR_AM | OR_G5LA | OR_BI)
+#define CONFIG_SYS_BR3_CAN		((CONFIG_SYS_CAN_BASE & BR_BA_MSK) | \
 					BR_PS_8 | BR_MS_UPMB | BR_V )
 #endif	/* CONFIG_CAN_DRIVER */
 
@@ -430,34 +432,34 @@
  * 80 Mhz => 80.000.000 / Divider = 156
  */
 
-#define CFG_PTA_PER_CLK	((4096 * 32 * 1000) / (4 * 64))
-#define CFG_MAMR_PTA	98
+#define CONFIG_SYS_PTA_PER_CLK	((4096 * 32 * 1000) / (4 * 64))
+#define CONFIG_SYS_MAMR_PTA	98
 
 /*
  * For 16 MBit, refresh rates could be 31.3 us
  * (= 64 ms / 2K = 125 / quad bursts).
  * For a simpler initialization, 15.6 us is used instead.
  *
- * #define CFG_MPTPR_2BK_2K	MPTPR_PTP_DIV32		for 2 banks
- * #define CFG_MPTPR_1BK_2K	MPTPR_PTP_DIV64		for 1 bank
+ * #define CONFIG_SYS_MPTPR_2BK_2K	MPTPR_PTP_DIV32		for 2 banks
+ * #define CONFIG_SYS_MPTPR_1BK_2K	MPTPR_PTP_DIV64		for 1 bank
  */
-#define CFG_MPTPR_2BK_4K	MPTPR_PTP_DIV16		/* setting for 2 banks	*/
-#define CFG_MPTPR_1BK_4K	MPTPR_PTP_DIV32		/* setting for 1 bank	*/
+#define CONFIG_SYS_MPTPR_2BK_4K	MPTPR_PTP_DIV16		/* setting for 2 banks	*/
+#define CONFIG_SYS_MPTPR_1BK_4K	MPTPR_PTP_DIV32		/* setting for 1 bank	*/
 
 /* refresh rate 7.8 us (= 64 ms / 8K = 31.2 / quad bursts) for 256 MBit		*/
-#define CFG_MPTPR_2BK_8K	MPTPR_PTP_DIV8		/* setting for 2 banks	*/
-#define CFG_MPTPR_1BK_8K	MPTPR_PTP_DIV16		/* setting for 1 bank	*/
+#define CONFIG_SYS_MPTPR_2BK_8K	MPTPR_PTP_DIV8		/* setting for 2 banks	*/
+#define CONFIG_SYS_MPTPR_1BK_8K	MPTPR_PTP_DIV16		/* setting for 1 bank	*/
 
 /*
  * MAMR settings for SDRAM
  */
 
 /* 8 column SDRAM */
-#define CFG_MAMR_8COL	((CFG_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
+#define CONFIG_SYS_MAMR_8COL	((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
 			 MAMR_AMA_TYPE_0 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A11 |	\
 			 MAMR_RLFA_1X	 | MAMR_WLFA_1X	   | MAMR_TLFA_4X)
 /* 9 column SDRAM */
-#define CFG_MAMR_9COL	((CFG_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
+#define CONFIG_SYS_MAMR_9COL	((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
 			 MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 |	\
 			 MAMR_RLFA_1X	 | MAMR_WLFA_1X	   | MAMR_TLFA_4X)
 
diff --git a/include/configs/TQM850M.h b/include/configs/TQM850M.h
index 6f0864f47..ce5dcc190 100644
--- a/include/configs/TQM850M.h
+++ b/include/configs/TQM850M.h
@@ -78,7 +78,7 @@
 #define CONFIG_BOOTCOMMAND	"run flash_self"
 
 #define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
-#undef	CFG_LOADS_BAUD_CHANGE		/* don't allow baudrate change	*/
+#undef	CONFIG_SYS_LOADS_BAUD_CHANGE		/* don't allow baudrate change	*/
 
 #undef	CONFIG_WATCHDOG			/* watchdog disabled		*/
 
@@ -122,32 +122,32 @@
 /*
  * Miscellaneous configurable options
  */
-#define	CFG_LONGHELP			/* undef to save memory		*/
-#define	CFG_PROMPT		"=> "	/* Monitor Command Prompt	*/
+#define	CONFIG_SYS_LONGHELP			/* undef to save memory		*/
+#define	CONFIG_SYS_PROMPT		"=> "	/* Monitor Command Prompt	*/
 
 #define CONFIG_CMDLINE_EDITING	1	/* add command line history	*/
-#define CFG_HUSH_PARSER		1	/* Use the HUSH parser		*/
-#ifdef	CFG_HUSH_PARSER
-#define	CFG_PROMPT_HUSH_PS2	"> "
+#define CONFIG_SYS_HUSH_PARSER		1	/* Use the HUSH parser		*/
+#ifdef	CONFIG_SYS_HUSH_PARSER
+#define	CONFIG_SYS_PROMPT_HUSH_PS2	"> "
 #endif
 
 #if defined(CONFIG_CMD_KGDB)
-#define	CFG_CBSIZE		1024	/* Console I/O Buffer Size	*/
+#define	CONFIG_SYS_CBSIZE		1024	/* Console I/O Buffer Size	*/
 #else
-#define	CFG_CBSIZE		256	/* Console I/O Buffer Size	*/
+#define	CONFIG_SYS_CBSIZE		256	/* Console I/O Buffer Size	*/
 #endif
-#define	CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define	CFG_MAXARGS		16	/* max number of command args	*/
-#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+#define	CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define	CONFIG_SYS_MAXARGS		16	/* max number of command args	*/
+#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
 
-#define CFG_MEMTEST_START	0x0400000	/* memtest works on	*/
-#define CFG_MEMTEST_END		0x0C00000	/* 4 ... 12 MB in DRAM	*/
+#define CONFIG_SYS_MEMTEST_START	0x0400000	/* memtest works on	*/
+#define CONFIG_SYS_MEMTEST_END		0x0C00000	/* 4 ... 12 MB in DRAM	*/
 
-#define	CFG_LOAD_ADDR		0x100000	/* default load address	*/
+#define	CONFIG_SYS_LOAD_ADDR		0x100000	/* default load address	*/
 
-#define	CFG_HZ			1000	/* decrementer freq: 1 ms ticks	*/
+#define	CONFIG_SYS_HZ			1000	/* decrementer freq: 1 ms ticks	*/
 
-#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
 
 /*
  * Low Level Configuration Settings
@@ -157,58 +157,60 @@
 /*-----------------------------------------------------------------------
  * Internal Memory Mapped Register
  */
-#define CFG_IMMR		0xFFF00000
+#define CONFIG_SYS_IMMR		0xFFF00000
 
 /*-----------------------------------------------------------------------
  * Definitions for initial stack pointer and data area (in DPRAM)
  */
-#define CFG_INIT_RAM_ADDR	CFG_IMMR
-#define	CFG_INIT_RAM_END	0x2F00	/* End of used area in DPRAM	*/
-#define	CFG_GBL_DATA_SIZE	64  /* size in bytes reserved for initial data */
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define	CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_IMMR
+#define	CONFIG_SYS_INIT_RAM_END	0x2F00	/* End of used area in DPRAM	*/
+#define	CONFIG_SYS_GBL_DATA_SIZE	64  /* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define	CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
 /*-----------------------------------------------------------------------
  * Start addresses for the final memory configuration
  * (Set up by the startup code)
- * Please note that CFG_SDRAM_BASE _must_ start at 0
+ * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
  */
-#define	CFG_SDRAM_BASE		0x00000000
-#define CFG_FLASH_BASE		0x40000000
-#define	CFG_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor	*/
-#define CFG_MONITOR_BASE	CFG_FLASH_BASE
-#define	CFG_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/
+#define	CONFIG_SYS_SDRAM_BASE		0x00000000
+#define CONFIG_SYS_FLASH_BASE		0x40000000
+#define	CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor	*/
+#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_FLASH_BASE
+#define	CONFIG_SYS_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/
 
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define	CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux	*/
+#define	CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux	*/
 
 /*-----------------------------------------------------------------------
  * FLASH organization
  */
 
 /* use CFI flash driver */
-#define CFG_FLASH_CFI		1	/* Flash is CFI conformant */
+#define CONFIG_SYS_FLASH_CFI		1	/* Flash is CFI conformant */
 #define CONFIG_FLASH_CFI_DRIVER	1	/* Use the common driver */
-#define CFG_FLASH_BANKS_LIST	{ CFG_FLASH_BASE }
-#define CFG_FLASH_EMPTY_INFO
-#define CFG_FLASH_USE_BUFFER_WRITE	1
-#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks */
-#define CFG_MAX_FLASH_SECT	256	/* max number of sectors on one chip */
+#define CONFIG_SYS_FLASH_BANKS_LIST	{ CONFIG_SYS_FLASH_BASE }
+#define CONFIG_SYS_FLASH_EMPTY_INFO
+#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE	1
+#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks */
+#define CONFIG_SYS_MAX_FLASH_SECT	256	/* max number of sectors on one chip */
 
-#define	CFG_ENV_IS_IN_FLASH	1
-#define	CFG_ENV_OFFSET		0x40000	/*   Offset   of Environment Sector	*/
-#define	CFG_ENV_SIZE		0x08000	/* Total Size of Environment		*/
-#define	CFG_ENV_SECT_SIZE	0x20000	/* Total Size of Environment Sector	*/
+#define	CONFIG_ENV_IS_IN_FLASH	1
+#define	CONFIG_ENV_OFFSET		0x40000	/*   Offset   of Environment Sector	*/
+#define	CONFIG_ENV_SIZE		0x08000	/* Total Size of Environment		*/
+#define	CONFIG_ENV_SECT_SIZE	0x20000	/* Total Size of Environment Sector	*/
 
 /* Address and size of Redundant Environment Sector	*/
-#define CFG_ENV_OFFSET_REDUND	(CFG_ENV_OFFSET+CFG_ENV_SECT_SIZE)
-#define CFG_ENV_SIZE_REDUND	(CFG_ENV_SIZE)
+#define CONFIG_ENV_OFFSET_REDUND	(CONFIG_ENV_OFFSET+CONFIG_ENV_SECT_SIZE)
+#define CONFIG_ENV_SIZE_REDUND	(CONFIG_ENV_SIZE)
 
-#define	CFG_USE_PPCENV			/* Environment embedded in sect .ppcenv */
+#define	CONFIG_SYS_USE_PPCENV			/* Environment embedded in sect .ppcenv */
+
+#define CONFIG_MISC_INIT_R		/* Make sure to remap flashes correctly */
 
 /*-----------------------------------------------------------------------
  * Dynamic MTD partition support
@@ -225,16 +227,16 @@
 /*-----------------------------------------------------------------------
  * Hardware Information Block
  */
-#define CFG_HWINFO_OFFSET	0x0003FFC0	/* offset of HW Info block */
-#define CFG_HWINFO_SIZE		0x00000040	/* size   of HW Info block */
-#define CFG_HWINFO_MAGIC	0x54514D38	/* 'TQM8' */
+#define CONFIG_SYS_HWINFO_OFFSET	0x0003FFC0	/* offset of HW Info block */
+#define CONFIG_SYS_HWINFO_SIZE		0x00000040	/* size   of HW Info block */
+#define CONFIG_SYS_HWINFO_MAGIC	0x54514D38	/* 'TQM8' */
 
 /*-----------------------------------------------------------------------
  * Cache Configuration
  */
-#define CFG_CACHELINE_SIZE	16	/* For all MPC8xx CPUs			*/
+#define CONFIG_SYS_CACHELINE_SIZE	16	/* For all MPC8xx CPUs			*/
 #if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT	4	/* log base 2 of the above value	*/
+#define CONFIG_SYS_CACHELINE_SHIFT	4	/* log base 2 of the above value	*/
 #endif
 
 /*-----------------------------------------------------------------------
@@ -244,10 +246,10 @@
  * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze
  */
 #if defined(CONFIG_WATCHDOG)
-#define CFG_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
+#define CONFIG_SYS_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
 			 SYPCR_SWE  | SYPCR_SWRI| SYPCR_SWP)
 #else
-#define CFG_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
+#define CONFIG_SYS_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
 #endif
 
 /*-----------------------------------------------------------------------
@@ -256,9 +258,9 @@
  * PCMCIA config., multi-function pin tri-state
  */
 #ifndef	CONFIG_CAN_DRIVER
-#define CFG_SIUMCR	(SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_MLRC01)
+#define CONFIG_SYS_SIUMCR	(SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_MLRC01)
 #else	/* we must activate GPL5 in the SIUMCR for CAN */
-#define CFG_SIUMCR	(SIUMCR_DBGC11 | SIUMCR_DBPC00 | SIUMCR_MLRC01)
+#define CONFIG_SYS_SIUMCR	(SIUMCR_DBGC11 | SIUMCR_DBPC00 | SIUMCR_MLRC01)
 #endif	/* CONFIG_CAN_DRIVER */
 
 /*-----------------------------------------------------------------------
@@ -266,20 +268,20 @@
  *-----------------------------------------------------------------------
  * Clear Reference Interrupt Status, Timebase freezing enabled
  */
-#define CFG_TBSCR	(TBSCR_REFA | TBSCR_REFB | TBSCR_TBF)
+#define CONFIG_SYS_TBSCR	(TBSCR_REFA | TBSCR_REFB | TBSCR_TBF)
 
 /*-----------------------------------------------------------------------
  * RTCSC - Real-Time Clock Status and Control Register		11-27
  *-----------------------------------------------------------------------
  */
-#define CFG_RTCSC	(RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE)
+#define CONFIG_SYS_RTCSC	(RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE)
 
 /*-----------------------------------------------------------------------
  * PISCR - Periodic Interrupt Status and Control		11-31
  *-----------------------------------------------------------------------
  * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
  */
-#define CFG_PISCR	(PISCR_PS | PISCR_PITF)
+#define CONFIG_SYS_PISCR	(PISCR_PS | PISCR_PITF)
 
 /*-----------------------------------------------------------------------
  * PLPRCR - PLL, Low-Power, and Reset Control Register		15-30
@@ -287,7 +289,7 @@
  * Reset PLL lock status sticky bit, timer expired status bit and timer
  * interrupt status bit
  */
-#define CFG_PLPRCR	(PLPRCR_SPLSS | PLPRCR_TEXPS | PLPRCR_TMIST)
+#define CONFIG_SYS_PLPRCR	(PLPRCR_SPLSS | PLPRCR_TEXPS | PLPRCR_TMIST)
 
 /*-----------------------------------------------------------------------
  * SCCR - System Clock and reset Control Register		15-27
@@ -296,7 +298,7 @@
  * power management and some other internal clocks
  */
 #define SCCR_MASK	SCCR_EBDF11
-#define CFG_SCCR	(SCCR_COM00   | SCCR_DFSYNC00 | SCCR_DFBRG00  | \
+#define CONFIG_SYS_SCCR	(SCCR_COM00   | SCCR_DFSYNC00 | SCCR_DFBRG00  | \
 			 SCCR_DFNL000 | SCCR_DFNH000  | SCCR_DFLCD000 | \
 			 SCCR_DFALCD00)
 
@@ -305,14 +307,14 @@
  *-----------------------------------------------------------------------
  *
  */
-#define CFG_PCMCIA_MEM_ADDR	(0xE0000000)
-#define CFG_PCMCIA_MEM_SIZE	( 64 << 20 )
-#define CFG_PCMCIA_DMA_ADDR	(0xE4000000)
-#define CFG_PCMCIA_DMA_SIZE	( 64 << 20 )
-#define CFG_PCMCIA_ATTRB_ADDR	(0xE8000000)
-#define CFG_PCMCIA_ATTRB_SIZE	( 64 << 20 )
-#define CFG_PCMCIA_IO_ADDR	(0xEC000000)
-#define CFG_PCMCIA_IO_SIZE	( 64 << 20 )
+#define CONFIG_SYS_PCMCIA_MEM_ADDR	(0xE0000000)
+#define CONFIG_SYS_PCMCIA_MEM_SIZE	( 64 << 20 )
+#define CONFIG_SYS_PCMCIA_DMA_ADDR	(0xE4000000)
+#define CONFIG_SYS_PCMCIA_DMA_SIZE	( 64 << 20 )
+#define CONFIG_SYS_PCMCIA_ATTRB_ADDR	(0xE8000000)
+#define CONFIG_SYS_PCMCIA_ATTRB_SIZE	( 64 << 20 )
+#define CONFIG_SYS_PCMCIA_IO_ADDR	(0xEC000000)
+#define CONFIG_SYS_PCMCIA_IO_SIZE	( 64 << 20 )
 
 /*-----------------------------------------------------------------------
  * IDE/ATA stuff (Supports IDE harddisk on PCMCIA Adapter)
@@ -325,28 +327,28 @@
 #undef	CONFIG_IDE_LED			/* LED   for ide not supported	*/
 #undef	CONFIG_IDE_RESET		/* reset for ide not supported	*/
 
-#define CFG_IDE_MAXBUS		1	/* max. 1 IDE bus		*/
-#define CFG_IDE_MAXDEVICE	1	/* max. 1 drive per IDE bus	*/
+#define CONFIG_SYS_IDE_MAXBUS		1	/* max. 1 IDE bus		*/
+#define CONFIG_SYS_IDE_MAXDEVICE	1	/* max. 1 drive per IDE bus	*/
 
-#define CFG_ATA_IDE0_OFFSET	0x0000
+#define CONFIG_SYS_ATA_IDE0_OFFSET	0x0000
 
-#define CFG_ATA_BASE_ADDR	CFG_PCMCIA_MEM_ADDR
+#define CONFIG_SYS_ATA_BASE_ADDR	CONFIG_SYS_PCMCIA_MEM_ADDR
 
 /* Offset for data I/O			*/
-#define CFG_ATA_DATA_OFFSET	(CFG_PCMCIA_MEM_SIZE + 0x320)
+#define CONFIG_SYS_ATA_DATA_OFFSET	(CONFIG_SYS_PCMCIA_MEM_SIZE + 0x320)
 
 /* Offset for normal register accesses	*/
-#define CFG_ATA_REG_OFFSET	(2 * CFG_PCMCIA_MEM_SIZE + 0x320)
+#define CONFIG_SYS_ATA_REG_OFFSET	(2 * CONFIG_SYS_PCMCIA_MEM_SIZE + 0x320)
 
 /* Offset for alternate registers	*/
-#define CFG_ATA_ALT_OFFSET	0x0100
+#define CONFIG_SYS_ATA_ALT_OFFSET	0x0100
 
 /*-----------------------------------------------------------------------
  *
  *-----------------------------------------------------------------------
  *
  */
-#define CFG_DER	0
+#define CONFIG_SYS_DER	0
 
 /*
  * Init Memory Controller:
@@ -361,22 +363,22 @@
  * restrict access enough to keep SRAM working (if any)
  * but not too much to meddle with FLASH accesses
  */
-#define CFG_REMAP_OR_AM		0x80000000	/* OR addr mask */
-#define CFG_PRELIM_OR_AM	0xE0000000	/* OR addr mask */
+#define CONFIG_SYS_REMAP_OR_AM		0x80000000	/* OR addr mask */
+#define CONFIG_SYS_PRELIM_OR_AM	0xE0000000	/* OR addr mask */
 
 /*
  * FLASH timing:
  */
-#define CFG_OR_TIMING_FLASH	(OR_ACS_DIV1  | OR_TRLX | OR_CSNT_SAM | \
+#define CONFIG_SYS_OR_TIMING_FLASH	(OR_ACS_DIV1  | OR_TRLX | OR_CSNT_SAM | \
 				 OR_SCY_3_CLK | OR_EHTR | OR_BI)
 
-#define CFG_OR0_REMAP	(CFG_REMAP_OR_AM  | CFG_OR_TIMING_FLASH)
-#define CFG_OR0_PRELIM	(CFG_PRELIM_OR_AM | CFG_OR_TIMING_FLASH)
-#define CFG_BR0_PRELIM	((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_V )
+#define CONFIG_SYS_OR0_REMAP	(CONFIG_SYS_REMAP_OR_AM  | CONFIG_SYS_OR_TIMING_FLASH)
+#define CONFIG_SYS_OR0_PRELIM	(CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_FLASH)
+#define CONFIG_SYS_BR0_PRELIM	((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_V )
 
-#define CFG_OR1_REMAP	CFG_OR0_REMAP
-#define CFG_OR1_PRELIM	CFG_OR0_PRELIM
-#define CFG_BR1_PRELIM	((FLASH_BASE1_PRELIM & BR_BA_MSK) | BR_V )
+#define CONFIG_SYS_OR1_REMAP	CONFIG_SYS_OR0_REMAP
+#define CONFIG_SYS_OR1_PRELIM	CONFIG_SYS_OR0_PRELIM
+#define CONFIG_SYS_BR1_PRELIM	((FLASH_BASE1_PRELIM & BR_BA_MSK) | BR_V )
 
 /*
  * BR2/3 and OR2/3 (SDRAM)
@@ -387,19 +389,19 @@
 #define	SDRAM_MAX_SIZE		0x04000000	/* max 64 MB per bank	*/
 
 /* SDRAM timing: Multiplexed addresses, GPL5 output to GPL5_A (don't care)	*/
-#define CFG_OR_TIMING_SDRAM	0x00000A00
+#define CONFIG_SYS_OR_TIMING_SDRAM	0x00000A00
 
-#define CFG_OR2_PRELIM	(CFG_PRELIM_OR_AM | CFG_OR_TIMING_SDRAM )
-#define CFG_BR2_PRELIM	((SDRAM_BASE2_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
+#define CONFIG_SYS_OR2_PRELIM	(CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_SDRAM )
+#define CONFIG_SYS_BR2_PRELIM	((SDRAM_BASE2_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
 
 #ifndef	CONFIG_CAN_DRIVER
-#define	CFG_OR3_PRELIM	CFG_OR2_PRELIM
-#define CFG_BR3_PRELIM	((SDRAM_BASE3_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
+#define	CONFIG_SYS_OR3_PRELIM	CONFIG_SYS_OR2_PRELIM
+#define CONFIG_SYS_BR3_PRELIM	((SDRAM_BASE3_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
 #else	/* CAN uses CS3#, so we can have only one SDRAM bank anyway */
-#define	CFG_CAN_BASE		0xC0000000	/* CAN mapped at 0xC0000000	*/
-#define CFG_CAN_OR_AM		0xFFFF8000	/* 32 kB address mask		*/
-#define CFG_OR3_CAN		(CFG_CAN_OR_AM | OR_G5LA | OR_BI)
-#define CFG_BR3_CAN		((CFG_CAN_BASE & BR_BA_MSK) | \
+#define	CONFIG_SYS_CAN_BASE		0xC0000000	/* CAN mapped at 0xC0000000	*/
+#define CONFIG_SYS_CAN_OR_AM		0xFFFF8000	/* 32 kB address mask		*/
+#define CONFIG_SYS_OR3_CAN		(CONFIG_SYS_CAN_OR_AM | OR_G5LA | OR_BI)
+#define CONFIG_SYS_BR3_CAN		((CONFIG_SYS_CAN_BASE & BR_BA_MSK) | \
 					BR_PS_8 | BR_MS_UPMB | BR_V )
 #endif	/* CONFIG_CAN_DRIVER */
 
@@ -430,34 +432,34 @@
  * 80 Mhz => 80.000.000 / Divider = 156
  */
 
-#define CFG_PTA_PER_CLK	((4096 * 32 * 1000) / (4 * 64))
-#define CFG_MAMR_PTA	98
+#define CONFIG_SYS_PTA_PER_CLK	((4096 * 32 * 1000) / (4 * 64))
+#define CONFIG_SYS_MAMR_PTA	98
 
 /*
  * For 16 MBit, refresh rates could be 31.3 us
  * (= 64 ms / 2K = 125 / quad bursts).
  * For a simpler initialization, 15.6 us is used instead.
  *
- * #define CFG_MPTPR_2BK_2K	MPTPR_PTP_DIV32		for 2 banks
- * #define CFG_MPTPR_1BK_2K	MPTPR_PTP_DIV64		for 1 bank
+ * #define CONFIG_SYS_MPTPR_2BK_2K	MPTPR_PTP_DIV32		for 2 banks
+ * #define CONFIG_SYS_MPTPR_1BK_2K	MPTPR_PTP_DIV64		for 1 bank
  */
-#define CFG_MPTPR_2BK_4K	MPTPR_PTP_DIV16		/* setting for 2 banks	*/
-#define CFG_MPTPR_1BK_4K	MPTPR_PTP_DIV32		/* setting for 1 bank	*/
+#define CONFIG_SYS_MPTPR_2BK_4K	MPTPR_PTP_DIV16		/* setting for 2 banks	*/
+#define CONFIG_SYS_MPTPR_1BK_4K	MPTPR_PTP_DIV32		/* setting for 1 bank	*/
 
 /* refresh rate 7.8 us (= 64 ms / 8K = 31.2 / quad bursts) for 256 MBit		*/
-#define CFG_MPTPR_2BK_8K	MPTPR_PTP_DIV8		/* setting for 2 banks	*/
-#define CFG_MPTPR_1BK_8K	MPTPR_PTP_DIV16		/* setting for 1 bank	*/
+#define CONFIG_SYS_MPTPR_2BK_8K	MPTPR_PTP_DIV8		/* setting for 2 banks	*/
+#define CONFIG_SYS_MPTPR_1BK_8K	MPTPR_PTP_DIV16		/* setting for 1 bank	*/
 
 /*
  * MAMR settings for SDRAM
  */
 
 /* 8 column SDRAM */
-#define CFG_MAMR_8COL	((CFG_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
+#define CONFIG_SYS_MAMR_8COL	((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
 			 MAMR_AMA_TYPE_0 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A11 |	\
 			 MAMR_RLFA_1X	 | MAMR_WLFA_1X	   | MAMR_TLFA_4X)
 /* 9 column SDRAM */
-#define CFG_MAMR_9COL	((CFG_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
+#define CONFIG_SYS_MAMR_9COL	((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
 			 MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 |	\
 			 MAMR_RLFA_1X	 | MAMR_WLFA_1X	   | MAMR_TLFA_4X)
 
diff --git a/include/configs/TQM855L.h b/include/configs/TQM855L.h
index 093d6599e..012e20396 100644
--- a/include/configs/TQM855L.h
+++ b/include/configs/TQM855L.h
@@ -83,7 +83,7 @@
 #define CONFIG_BOOTCOMMAND	"run flash_self"
 
 #define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
-#undef	CFG_LOADS_BAUD_CHANGE		/* don't allow baudrate change	*/
+#undef	CONFIG_SYS_LOADS_BAUD_CHANGE		/* don't allow baudrate change	*/
 
 #undef	CONFIG_WATCHDOG			/* watchdog disabled		*/
 
@@ -128,32 +128,32 @@
 /*
  * Miscellaneous configurable options
  */
-#define	CFG_LONGHELP			/* undef to save memory		*/
-#define	CFG_PROMPT		"=> "	/* Monitor Command Prompt	*/
+#define	CONFIG_SYS_LONGHELP			/* undef to save memory		*/
+#define	CONFIG_SYS_PROMPT		"=> "	/* Monitor Command Prompt	*/
 
 #define CONFIG_CMDLINE_EDITING	1	/* add command line history	*/
-#define CFG_HUSH_PARSER		1	/* Use the HUSH parser		*/
-#ifdef	CFG_HUSH_PARSER
-#define	CFG_PROMPT_HUSH_PS2	"> "
+#define CONFIG_SYS_HUSH_PARSER		1	/* Use the HUSH parser		*/
+#ifdef	CONFIG_SYS_HUSH_PARSER
+#define	CONFIG_SYS_PROMPT_HUSH_PS2	"> "
 #endif
 
 #if defined(CONFIG_CMD_KGDB)
-#define	CFG_CBSIZE		1024	/* Console I/O Buffer Size	*/
+#define	CONFIG_SYS_CBSIZE		1024	/* Console I/O Buffer Size	*/
 #else
-#define	CFG_CBSIZE		256	/* Console I/O Buffer Size	*/
+#define	CONFIG_SYS_CBSIZE		256	/* Console I/O Buffer Size	*/
 #endif
-#define	CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define	CFG_MAXARGS		16	/* max number of command args	*/
-#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+#define	CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define	CONFIG_SYS_MAXARGS		16	/* max number of command args	*/
+#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
 
-#define CFG_MEMTEST_START	0x0400000	/* memtest works on	*/
-#define CFG_MEMTEST_END		0x0C00000	/* 4 ... 12 MB in DRAM	*/
+#define CONFIG_SYS_MEMTEST_START	0x0400000	/* memtest works on	*/
+#define CONFIG_SYS_MEMTEST_END		0x0C00000	/* 4 ... 12 MB in DRAM	*/
 
-#define	CFG_LOAD_ADDR		0x100000	/* default load address	*/
+#define	CONFIG_SYS_LOAD_ADDR		0x100000	/* default load address	*/
 
-#define	CFG_HZ			1000	/* decrementer freq: 1 ms ticks	*/
+#define	CONFIG_SYS_HZ			1000	/* decrementer freq: 1 ms ticks	*/
 
-#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
 
 /*
  * Low Level Configuration Settings
@@ -163,57 +163,59 @@
 /*-----------------------------------------------------------------------
  * Internal Memory Mapped Register
  */
-#define CFG_IMMR		0xFFF00000
+#define CONFIG_SYS_IMMR		0xFFF00000
 
 /*-----------------------------------------------------------------------
  * Definitions for initial stack pointer and data area (in DPRAM)
  */
-#define CFG_INIT_RAM_ADDR	CFG_IMMR
-#define	CFG_INIT_RAM_END	0x2F00	/* End of used area in DPRAM	*/
-#define	CFG_GBL_DATA_SIZE	64  /* size in bytes reserved for initial data */
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define	CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_IMMR
+#define	CONFIG_SYS_INIT_RAM_END	0x2F00	/* End of used area in DPRAM	*/
+#define	CONFIG_SYS_GBL_DATA_SIZE	64  /* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define	CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
 /*-----------------------------------------------------------------------
  * Start addresses for the final memory configuration
  * (Set up by the startup code)
- * Please note that CFG_SDRAM_BASE _must_ start at 0
+ * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
  */
-#define	CFG_SDRAM_BASE		0x00000000
-#define CFG_FLASH_BASE		0x40000000
-#define	CFG_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor	*/
-#define CFG_MONITOR_BASE	CFG_FLASH_BASE
-#define	CFG_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/
+#define	CONFIG_SYS_SDRAM_BASE		0x00000000
+#define CONFIG_SYS_FLASH_BASE		0x40000000
+#define	CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor	*/
+#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_FLASH_BASE
+#define	CONFIG_SYS_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/
 
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define	CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux	*/
+#define	CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux	*/
 
 /*-----------------------------------------------------------------------
  * FLASH organization
  */
 
 /* use CFI flash driver */
-#define CFG_FLASH_CFI		1	/* Flash is CFI conformant */
+#define CONFIG_SYS_FLASH_CFI		1	/* Flash is CFI conformant */
 #define CONFIG_FLASH_CFI_DRIVER	1	/* Use the common driver */
-#define CFG_FLASH_BANKS_LIST	{ CFG_FLASH_BASE, CFG_FLASH_BASE+flash_info[0].size }
-#define CFG_FLASH_EMPTY_INFO
-#define CFG_FLASH_USE_BUFFER_WRITE	1
-#define CFG_MAX_FLASH_BANKS	2	/* max number of memory banks */
-#define CFG_MAX_FLASH_SECT	71	/* max number of sectors on one chip */
+#define CONFIG_SYS_FLASH_BANKS_LIST	{ CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE+flash_info[0].size }
+#define CONFIG_SYS_FLASH_EMPTY_INFO
+#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE	1
+#define CONFIG_SYS_MAX_FLASH_BANKS	2	/* max number of memory banks */
+#define CONFIG_SYS_MAX_FLASH_SECT	71	/* max number of sectors on one chip */
 
-#define	CFG_ENV_IS_IN_FLASH	1
-#define	CFG_ENV_OFFSET		0x8000	/*   Offset   of Environment Sector	*/
-#define	CFG_ENV_SIZE		0x4000	/* Total Size of Environment Sector	*/
+#define	CONFIG_ENV_IS_IN_FLASH	1
+#define	CONFIG_ENV_OFFSET		0x8000	/*   Offset   of Environment Sector	*/
+#define	CONFIG_ENV_SIZE		0x4000	/* Total Size of Environment Sector	*/
 
 /* Address and size of Redundant Environment Sector	*/
-#define CFG_ENV_OFFSET_REDUND	(CFG_ENV_OFFSET+CFG_ENV_SIZE)
-#define CFG_ENV_SIZE_REDUND	(CFG_ENV_SIZE)
+#define CONFIG_ENV_OFFSET_REDUND	(CONFIG_ENV_OFFSET+CONFIG_ENV_SIZE)
+#define CONFIG_ENV_SIZE_REDUND	(CONFIG_ENV_SIZE)
 
-#define	CFG_USE_PPCENV			/* Environment embedded in sect .ppcenv */
+#define	CONFIG_SYS_USE_PPCENV			/* Environment embedded in sect .ppcenv */
+
+#define CONFIG_MISC_INIT_R		/* Make sure to remap flashes correctly */
 
 /*-----------------------------------------------------------------------
  * Dynamic MTD partition support
@@ -230,16 +232,16 @@
 /*-----------------------------------------------------------------------
  * Hardware Information Block
  */
-#define CFG_HWINFO_OFFSET	0x0003FFC0	/* offset of HW Info block */
-#define CFG_HWINFO_SIZE		0x00000040	/* size   of HW Info block */
-#define CFG_HWINFO_MAGIC	0x54514D38	/* 'TQM8' */
+#define CONFIG_SYS_HWINFO_OFFSET	0x0003FFC0	/* offset of HW Info block */
+#define CONFIG_SYS_HWINFO_SIZE		0x00000040	/* size   of HW Info block */
+#define CONFIG_SYS_HWINFO_MAGIC	0x54514D38	/* 'TQM8' */
 
 /*-----------------------------------------------------------------------
  * Cache Configuration
  */
-#define CFG_CACHELINE_SIZE	16	/* For all MPC8xx CPUs			*/
+#define CONFIG_SYS_CACHELINE_SIZE	16	/* For all MPC8xx CPUs			*/
 #if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT	4	/* log base 2 of the above value	*/
+#define CONFIG_SYS_CACHELINE_SHIFT	4	/* log base 2 of the above value	*/
 #endif
 
 /*-----------------------------------------------------------------------
@@ -249,10 +251,10 @@
  * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze
  */
 #if defined(CONFIG_WATCHDOG)
-#define CFG_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
+#define CONFIG_SYS_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
 			 SYPCR_SWE  | SYPCR_SWRI| SYPCR_SWP)
 #else
-#define CFG_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
+#define CONFIG_SYS_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
 #endif
 
 /*-----------------------------------------------------------------------
@@ -261,9 +263,9 @@
  * PCMCIA config., multi-function pin tri-state
  */
 #ifndef	CONFIG_CAN_DRIVER
-#define CFG_SIUMCR	(SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_MLRC01)
+#define CONFIG_SYS_SIUMCR	(SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_MLRC01)
 #else	/* we must activate GPL5 in the SIUMCR for CAN */
-#define CFG_SIUMCR	(SIUMCR_DBGC11 | SIUMCR_DBPC00 | SIUMCR_MLRC01)
+#define CONFIG_SYS_SIUMCR	(SIUMCR_DBGC11 | SIUMCR_DBPC00 | SIUMCR_MLRC01)
 #endif	/* CONFIG_CAN_DRIVER */
 
 /*-----------------------------------------------------------------------
@@ -271,20 +273,20 @@
  *-----------------------------------------------------------------------
  * Clear Reference Interrupt Status, Timebase freezing enabled
  */
-#define CFG_TBSCR	(TBSCR_REFA | TBSCR_REFB | TBSCR_TBF)
+#define CONFIG_SYS_TBSCR	(TBSCR_REFA | TBSCR_REFB | TBSCR_TBF)
 
 /*-----------------------------------------------------------------------
  * RTCSC - Real-Time Clock Status and Control Register		11-27
  *-----------------------------------------------------------------------
  */
-#define CFG_RTCSC	(RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE)
+#define CONFIG_SYS_RTCSC	(RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE)
 
 /*-----------------------------------------------------------------------
  * PISCR - Periodic Interrupt Status and Control		11-31
  *-----------------------------------------------------------------------
  * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
  */
-#define CFG_PISCR	(PISCR_PS | PISCR_PITF)
+#define CONFIG_SYS_PISCR	(PISCR_PS | PISCR_PITF)
 
 /*-----------------------------------------------------------------------
  * PLPRCR - PLL, Low-Power, and Reset Control Register		15-30
@@ -292,7 +294,7 @@
  * Reset PLL lock status sticky bit, timer expired status bit and timer
  * interrupt status bit
  */
-#define CFG_PLPRCR	(PLPRCR_SPLSS | PLPRCR_TEXPS | PLPRCR_TMIST)
+#define CONFIG_SYS_PLPRCR	(PLPRCR_SPLSS | PLPRCR_TEXPS | PLPRCR_TMIST)
 
 /*-----------------------------------------------------------------------
  * SCCR - System Clock and reset Control Register		15-27
@@ -301,7 +303,7 @@
  * power management and some other internal clocks
  */
 #define SCCR_MASK	SCCR_EBDF11
-#define CFG_SCCR	(SCCR_COM00   | SCCR_DFSYNC00 | SCCR_DFBRG00  | \
+#define CONFIG_SYS_SCCR	(SCCR_COM00   | SCCR_DFSYNC00 | SCCR_DFBRG00  | \
 			 SCCR_DFNL000 | SCCR_DFNH000  | SCCR_DFLCD000 | \
 			 SCCR_DFALCD00)
 
@@ -310,14 +312,14 @@
  *-----------------------------------------------------------------------
  *
  */
-#define CFG_PCMCIA_MEM_ADDR	(0xE0000000)
-#define CFG_PCMCIA_MEM_SIZE	( 64 << 20 )
-#define CFG_PCMCIA_DMA_ADDR	(0xE4000000)
-#define CFG_PCMCIA_DMA_SIZE	( 64 << 20 )
-#define CFG_PCMCIA_ATTRB_ADDR	(0xE8000000)
-#define CFG_PCMCIA_ATTRB_SIZE	( 64 << 20 )
-#define CFG_PCMCIA_IO_ADDR	(0xEC000000)
-#define CFG_PCMCIA_IO_SIZE	( 64 << 20 )
+#define CONFIG_SYS_PCMCIA_MEM_ADDR	(0xE0000000)
+#define CONFIG_SYS_PCMCIA_MEM_SIZE	( 64 << 20 )
+#define CONFIG_SYS_PCMCIA_DMA_ADDR	(0xE4000000)
+#define CONFIG_SYS_PCMCIA_DMA_SIZE	( 64 << 20 )
+#define CONFIG_SYS_PCMCIA_ATTRB_ADDR	(0xE8000000)
+#define CONFIG_SYS_PCMCIA_ATTRB_SIZE	( 64 << 20 )
+#define CONFIG_SYS_PCMCIA_IO_ADDR	(0xEC000000)
+#define CONFIG_SYS_PCMCIA_IO_SIZE	( 64 << 20 )
 
 /*-----------------------------------------------------------------------
  * IDE/ATA stuff (Supports IDE harddisk on PCMCIA Adapter)
@@ -330,28 +332,28 @@
 #undef	CONFIG_IDE_LED			/* LED   for ide not supported	*/
 #undef	CONFIG_IDE_RESET		/* reset for ide not supported	*/
 
-#define CFG_IDE_MAXBUS		1	/* max. 1 IDE bus		*/
-#define CFG_IDE_MAXDEVICE	1	/* max. 1 drive per IDE bus	*/
+#define CONFIG_SYS_IDE_MAXBUS		1	/* max. 1 IDE bus		*/
+#define CONFIG_SYS_IDE_MAXDEVICE	1	/* max. 1 drive per IDE bus	*/
 
-#define CFG_ATA_IDE0_OFFSET	0x0000
+#define CONFIG_SYS_ATA_IDE0_OFFSET	0x0000
 
-#define CFG_ATA_BASE_ADDR	CFG_PCMCIA_MEM_ADDR
+#define CONFIG_SYS_ATA_BASE_ADDR	CONFIG_SYS_PCMCIA_MEM_ADDR
 
 /* Offset for data I/O			*/
-#define CFG_ATA_DATA_OFFSET	(CFG_PCMCIA_MEM_SIZE + 0x320)
+#define CONFIG_SYS_ATA_DATA_OFFSET	(CONFIG_SYS_PCMCIA_MEM_SIZE + 0x320)
 
 /* Offset for normal register accesses	*/
-#define CFG_ATA_REG_OFFSET	(2 * CFG_PCMCIA_MEM_SIZE + 0x320)
+#define CONFIG_SYS_ATA_REG_OFFSET	(2 * CONFIG_SYS_PCMCIA_MEM_SIZE + 0x320)
 
 /* Offset for alternate registers	*/
-#define CFG_ATA_ALT_OFFSET	0x0100
+#define CONFIG_SYS_ATA_ALT_OFFSET	0x0100
 
 /*-----------------------------------------------------------------------
  *
  *-----------------------------------------------------------------------
  *
  */
-#define CFG_DER	0
+#define CONFIG_SYS_DER	0
 
 /*
  * Init Memory Controller:
@@ -366,22 +368,22 @@
  * restrict access enough to keep SRAM working (if any)
  * but not too much to meddle with FLASH accesses
  */
-#define CFG_REMAP_OR_AM		0x80000000	/* OR addr mask */
-#define CFG_PRELIM_OR_AM	0xE0000000	/* OR addr mask */
+#define CONFIG_SYS_REMAP_OR_AM		0x80000000	/* OR addr mask */
+#define CONFIG_SYS_PRELIM_OR_AM	0xE0000000	/* OR addr mask */
 
 /*
  * FLASH timing:
  */
-#define CFG_OR_TIMING_FLASH	(OR_ACS_DIV1  | OR_TRLX | OR_CSNT_SAM | \
+#define CONFIG_SYS_OR_TIMING_FLASH	(OR_ACS_DIV1  | OR_TRLX | OR_CSNT_SAM | \
 				 OR_SCY_3_CLK | OR_EHTR | OR_BI)
 
-#define CFG_OR0_REMAP	(CFG_REMAP_OR_AM  | CFG_OR_TIMING_FLASH)
-#define CFG_OR0_PRELIM	(CFG_PRELIM_OR_AM | CFG_OR_TIMING_FLASH)
-#define CFG_BR0_PRELIM	((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_V )
+#define CONFIG_SYS_OR0_REMAP	(CONFIG_SYS_REMAP_OR_AM  | CONFIG_SYS_OR_TIMING_FLASH)
+#define CONFIG_SYS_OR0_PRELIM	(CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_FLASH)
+#define CONFIG_SYS_BR0_PRELIM	((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_V )
 
-#define CFG_OR1_REMAP	CFG_OR0_REMAP
-#define CFG_OR1_PRELIM	CFG_OR0_PRELIM
-#define CFG_BR1_PRELIM	((FLASH_BASE1_PRELIM & BR_BA_MSK) | BR_V )
+#define CONFIG_SYS_OR1_REMAP	CONFIG_SYS_OR0_REMAP
+#define CONFIG_SYS_OR1_PRELIM	CONFIG_SYS_OR0_PRELIM
+#define CONFIG_SYS_BR1_PRELIM	((FLASH_BASE1_PRELIM & BR_BA_MSK) | BR_V )
 
 /*
  * BR2/3 and OR2/3 (SDRAM)
@@ -392,19 +394,19 @@
 #define	SDRAM_MAX_SIZE		0x04000000	/* max 64 MB per bank	*/
 
 /* SDRAM timing: Multiplexed addresses, GPL5 output to GPL5_A (don't care)	*/
-#define CFG_OR_TIMING_SDRAM	0x00000A00
+#define CONFIG_SYS_OR_TIMING_SDRAM	0x00000A00
 
-#define CFG_OR2_PRELIM	(CFG_PRELIM_OR_AM | CFG_OR_TIMING_SDRAM )
-#define CFG_BR2_PRELIM	((SDRAM_BASE2_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
+#define CONFIG_SYS_OR2_PRELIM	(CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_SDRAM )
+#define CONFIG_SYS_BR2_PRELIM	((SDRAM_BASE2_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
 
 #ifndef	CONFIG_CAN_DRIVER
-#define	CFG_OR3_PRELIM	CFG_OR2_PRELIM
-#define CFG_BR3_PRELIM	((SDRAM_BASE3_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
+#define	CONFIG_SYS_OR3_PRELIM	CONFIG_SYS_OR2_PRELIM
+#define CONFIG_SYS_BR3_PRELIM	((SDRAM_BASE3_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
 #else	/* CAN uses CS3#, so we can have only one SDRAM bank anyway */
-#define	CFG_CAN_BASE		0xC0000000	/* CAN mapped at 0xC0000000	*/
-#define CFG_CAN_OR_AM		0xFFFF8000	/* 32 kB address mask		*/
-#define CFG_OR3_CAN		(CFG_CAN_OR_AM | OR_G5LA | OR_BI)
-#define CFG_BR3_CAN		((CFG_CAN_BASE & BR_BA_MSK) | \
+#define	CONFIG_SYS_CAN_BASE		0xC0000000	/* CAN mapped at 0xC0000000	*/
+#define CONFIG_SYS_CAN_OR_AM		0xFFFF8000	/* 32 kB address mask		*/
+#define CONFIG_SYS_OR3_CAN		(CONFIG_SYS_CAN_OR_AM | OR_G5LA | OR_BI)
+#define CONFIG_SYS_BR3_CAN		((CONFIG_SYS_CAN_BASE & BR_BA_MSK) | \
 					BR_PS_8 | BR_MS_UPMB | BR_V )
 #endif	/* CONFIG_CAN_DRIVER */
 
@@ -435,34 +437,34 @@
  * 80 Mhz => 80.000.000 / Divider = 156
  */
 
-#define CFG_PTA_PER_CLK	((4096 * 32 * 1000) / (4 * 64))
-#define CFG_MAMR_PTA	98
+#define CONFIG_SYS_PTA_PER_CLK	((4096 * 32 * 1000) / (4 * 64))
+#define CONFIG_SYS_MAMR_PTA	98
 
 /*
  * For 16 MBit, refresh rates could be 31.3 us
  * (= 64 ms / 2K = 125 / quad bursts).
  * For a simpler initialization, 15.6 us is used instead.
  *
- * #define CFG_MPTPR_2BK_2K	MPTPR_PTP_DIV32		for 2 banks
- * #define CFG_MPTPR_1BK_2K	MPTPR_PTP_DIV64		for 1 bank
+ * #define CONFIG_SYS_MPTPR_2BK_2K	MPTPR_PTP_DIV32		for 2 banks
+ * #define CONFIG_SYS_MPTPR_1BK_2K	MPTPR_PTP_DIV64		for 1 bank
  */
-#define CFG_MPTPR_2BK_4K	MPTPR_PTP_DIV16		/* setting for 2 banks	*/
-#define CFG_MPTPR_1BK_4K	MPTPR_PTP_DIV32		/* setting for 1 bank	*/
+#define CONFIG_SYS_MPTPR_2BK_4K	MPTPR_PTP_DIV16		/* setting for 2 banks	*/
+#define CONFIG_SYS_MPTPR_1BK_4K	MPTPR_PTP_DIV32		/* setting for 1 bank	*/
 
 /* refresh rate 7.8 us (= 64 ms / 8K = 31.2 / quad bursts) for 256 MBit		*/
-#define CFG_MPTPR_2BK_8K	MPTPR_PTP_DIV8		/* setting for 2 banks	*/
-#define CFG_MPTPR_1BK_8K	MPTPR_PTP_DIV16		/* setting for 1 bank	*/
+#define CONFIG_SYS_MPTPR_2BK_8K	MPTPR_PTP_DIV8		/* setting for 2 banks	*/
+#define CONFIG_SYS_MPTPR_1BK_8K	MPTPR_PTP_DIV16		/* setting for 1 bank	*/
 
 /*
  * MAMR settings for SDRAM
  */
 
 /* 8 column SDRAM */
-#define CFG_MAMR_8COL	((CFG_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
+#define CONFIG_SYS_MAMR_8COL	((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
 			 MAMR_AMA_TYPE_0 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A11 |	\
 			 MAMR_RLFA_1X	 | MAMR_WLFA_1X	   | MAMR_TLFA_4X)
 /* 9 column SDRAM */
-#define CFG_MAMR_9COL	((CFG_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
+#define CONFIG_SYS_MAMR_9COL	((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
 			 MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 |	\
 			 MAMR_RLFA_1X	 | MAMR_WLFA_1X	   | MAMR_TLFA_4X)
 
diff --git a/include/configs/TQM855M.h b/include/configs/TQM855M.h
index 64bbc39cf..84889ea17 100644
--- a/include/configs/TQM855M.h
+++ b/include/configs/TQM855M.h
@@ -83,7 +83,7 @@
 #define CONFIG_BOOTCOMMAND	"run flash_self"
 
 #define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
-#undef	CFG_LOADS_BAUD_CHANGE		/* don't allow baudrate change	*/
+#undef	CONFIG_SYS_LOADS_BAUD_CHANGE		/* don't allow baudrate change	*/
 
 #undef	CONFIG_WATCHDOG			/* watchdog disabled		*/
 
@@ -95,8 +95,8 @@
 #undef	CONFIG_HARD_I2C			/* I2C with hardware support	*/
 #define	CONFIG_SOFT_I2C         1	/* I2C bit-banged		*/
 
-#define CFG_I2C_SPEED		93000	/* 93 kHz is supposed to work	*/
-#define CFG_I2C_SLAVE		0xFE
+#define CONFIG_SYS_I2C_SPEED		93000	/* 93 kHz is supposed to work	*/
+#define CONFIG_SYS_I2C_SLAVE		0xFE
 
 #ifdef CONFIG_SOFT_I2C
 /*
@@ -116,12 +116,12 @@
 #define I2C_DELAY	udelay(2)	/* 1/4 I2C clock duration */
 #endif	/* CONFIG_SOFT_I2C */
 
-#define CFG_I2C_EEPROM_ADDR	0x50		/* EEPROM AT24C64	*/
-#define CFG_I2C_EEPROM_ADDR_LEN	2		/* two byte address	*/
+#define CONFIG_SYS_I2C_EEPROM_ADDR	0x50		/* EEPROM AT24C64	*/
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN	2		/* two byte address	*/
 #if 0
-#define CFG_EEPROM_PAGE_WRITE_DELAY_MS	10	/* takes up to 10 msec	*/
-#define CFG_I2C_EEPROM_ADDR_OVERFLOW 0x01
-#define CFG_EEPROM_PAGE_WRITE_BITS	5
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	10	/* takes up to 10 msec	*/
+#define CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW 0x01
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS	5
 #endif
 
 /*
@@ -162,32 +162,32 @@
 /*
  * Miscellaneous configurable options
  */
-#define	CFG_LONGHELP			/* undef to save memory		*/
-#define	CFG_PROMPT		"=> "	/* Monitor Command Prompt	*/
+#define	CONFIG_SYS_LONGHELP			/* undef to save memory		*/
+#define	CONFIG_SYS_PROMPT		"=> "	/* Monitor Command Prompt	*/
 
 #define CONFIG_CMDLINE_EDITING	1	/* add command line history	*/
-#define CFG_HUSH_PARSER		1	/* Use the HUSH parser		*/
-#ifdef	CFG_HUSH_PARSER
-#define	CFG_PROMPT_HUSH_PS2	"> "
+#define CONFIG_SYS_HUSH_PARSER		1	/* Use the HUSH parser		*/
+#ifdef	CONFIG_SYS_HUSH_PARSER
+#define	CONFIG_SYS_PROMPT_HUSH_PS2	"> "
 #endif
 
 #if defined(CONFIG_CMD_KGDB)
-#define	CFG_CBSIZE		1024	/* Console I/O Buffer Size	*/
+#define	CONFIG_SYS_CBSIZE		1024	/* Console I/O Buffer Size	*/
 #else
-#define	CFG_CBSIZE		256	/* Console I/O Buffer Size	*/
+#define	CONFIG_SYS_CBSIZE		256	/* Console I/O Buffer Size	*/
 #endif
-#define	CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define	CFG_MAXARGS		16	/* max number of command args	*/
-#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+#define	CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define	CONFIG_SYS_MAXARGS		16	/* max number of command args	*/
+#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
 
-#define CFG_MEMTEST_START	0x0400000	/* memtest works on	*/
-#define CFG_MEMTEST_END		0x0C00000	/* 4 ... 12 MB in DRAM	*/
+#define CONFIG_SYS_MEMTEST_START	0x0400000	/* memtest works on	*/
+#define CONFIG_SYS_MEMTEST_END		0x0C00000	/* 4 ... 12 MB in DRAM	*/
 
-#define	CFG_LOAD_ADDR		0x100000	/* default load address	*/
+#define	CONFIG_SYS_LOAD_ADDR		0x100000	/* default load address	*/
 
-#define	CFG_HZ			1000	/* decrementer freq: 1 ms ticks	*/
+#define	CONFIG_SYS_HZ			1000	/* decrementer freq: 1 ms ticks	*/
 
-#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
 
 /*
  * Low Level Configuration Settings
@@ -197,58 +197,60 @@
 /*-----------------------------------------------------------------------
  * Internal Memory Mapped Register
  */
-#define CFG_IMMR		0xFFF00000
+#define CONFIG_SYS_IMMR		0xFFF00000
 
 /*-----------------------------------------------------------------------
  * Definitions for initial stack pointer and data area (in DPRAM)
  */
-#define CFG_INIT_RAM_ADDR	CFG_IMMR
-#define	CFG_INIT_RAM_END	0x2F00	/* End of used area in DPRAM	*/
-#define	CFG_GBL_DATA_SIZE	64  /* size in bytes reserved for initial data */
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define	CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_IMMR
+#define	CONFIG_SYS_INIT_RAM_END	0x2F00	/* End of used area in DPRAM	*/
+#define	CONFIG_SYS_GBL_DATA_SIZE	64  /* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define	CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
 /*-----------------------------------------------------------------------
  * Start addresses for the final memory configuration
  * (Set up by the startup code)
- * Please note that CFG_SDRAM_BASE _must_ start at 0
+ * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
  */
-#define	CFG_SDRAM_BASE		0x00000000
-#define CFG_FLASH_BASE		0x40000000
-#define	CFG_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor	*/
-#define CFG_MONITOR_BASE	CFG_FLASH_BASE
-#define	CFG_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/
+#define	CONFIG_SYS_SDRAM_BASE		0x00000000
+#define CONFIG_SYS_FLASH_BASE		0x40000000
+#define	CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor	*/
+#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_FLASH_BASE
+#define	CONFIG_SYS_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/
 
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define	CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux	*/
+#define	CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux	*/
 
 /*-----------------------------------------------------------------------
  * FLASH organization
  */
 
 /* use CFI flash driver */
-#define CFG_FLASH_CFI		1	/* Flash is CFI conformant */
+#define CONFIG_SYS_FLASH_CFI		1	/* Flash is CFI conformant */
 #define CONFIG_FLASH_CFI_DRIVER	1	/* Use the common driver */
-#define CFG_FLASH_BANKS_LIST	{ CFG_FLASH_BASE }
-#define CFG_FLASH_EMPTY_INFO
-#define CFG_FLASH_USE_BUFFER_WRITE	1
-#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks */
-#define CFG_MAX_FLASH_SECT	256	/* max number of sectors on one chip */
+#define CONFIG_SYS_FLASH_BANKS_LIST	{ CONFIG_SYS_FLASH_BASE }
+#define CONFIG_SYS_FLASH_EMPTY_INFO
+#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE	1
+#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks */
+#define CONFIG_SYS_MAX_FLASH_SECT	256	/* max number of sectors on one chip */
 
-#define	CFG_ENV_IS_IN_FLASH	1
-#define	CFG_ENV_OFFSET		0x40000	/*   Offset   of Environment Sector	*/
-#define	CFG_ENV_SIZE		0x08000	/* Total Size of Environment		*/
-#define	CFG_ENV_SECT_SIZE	0x20000	/* Total Size of Environment Sector	*/
+#define	CONFIG_ENV_IS_IN_FLASH	1
+#define	CONFIG_ENV_OFFSET		0x40000	/*   Offset   of Environment Sector	*/
+#define	CONFIG_ENV_SIZE		0x08000	/* Total Size of Environment		*/
+#define	CONFIG_ENV_SECT_SIZE	0x20000	/* Total Size of Environment Sector	*/
 
 /* Address and size of Redundant Environment Sector	*/
-#define CFG_ENV_OFFSET_REDUND	(CFG_ENV_OFFSET+CFG_ENV_SECT_SIZE)
-#define CFG_ENV_SIZE_REDUND	(CFG_ENV_SIZE)
+#define CONFIG_ENV_OFFSET_REDUND	(CONFIG_ENV_OFFSET+CONFIG_ENV_SECT_SIZE)
+#define CONFIG_ENV_SIZE_REDUND	(CONFIG_ENV_SIZE)
 
-#define	CFG_USE_PPCENV			/* Environment embedded in sect .ppcenv */
+#define	CONFIG_SYS_USE_PPCENV			/* Environment embedded in sect .ppcenv */
+
+#define CONFIG_MISC_INIT_R		/* Make sure to remap flashes correctly */
 
 /*-----------------------------------------------------------------------
  * Dynamic MTD partition support
@@ -265,16 +267,16 @@
 /*-----------------------------------------------------------------------
  * Hardware Information Block
  */
-#define CFG_HWINFO_OFFSET	0x0003FFC0	/* offset of HW Info block */
-#define CFG_HWINFO_SIZE		0x00000040	/* size   of HW Info block */
-#define CFG_HWINFO_MAGIC	0x54514D38	/* 'TQM8' */
+#define CONFIG_SYS_HWINFO_OFFSET	0x0003FFC0	/* offset of HW Info block */
+#define CONFIG_SYS_HWINFO_SIZE		0x00000040	/* size   of HW Info block */
+#define CONFIG_SYS_HWINFO_MAGIC	0x54514D38	/* 'TQM8' */
 
 /*-----------------------------------------------------------------------
  * Cache Configuration
  */
-#define CFG_CACHELINE_SIZE	16	/* For all MPC8xx CPUs			*/
+#define CONFIG_SYS_CACHELINE_SIZE	16	/* For all MPC8xx CPUs			*/
 #if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT	4	/* log base 2 of the above value	*/
+#define CONFIG_SYS_CACHELINE_SHIFT	4	/* log base 2 of the above value	*/
 #endif
 
 /*-----------------------------------------------------------------------
@@ -284,10 +286,10 @@
  * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze
  */
 #if defined(CONFIG_WATCHDOG)
-#define CFG_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
+#define CONFIG_SYS_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
 			 SYPCR_SWE  | SYPCR_SWRI| SYPCR_SWP)
 #else
-#define CFG_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
+#define CONFIG_SYS_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
 #endif
 
 /*-----------------------------------------------------------------------
@@ -296,9 +298,9 @@
  * PCMCIA config., multi-function pin tri-state
  */
 #ifndef	CONFIG_CAN_DRIVER
-#define CFG_SIUMCR	(SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_MLRC01)
+#define CONFIG_SYS_SIUMCR	(SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_MLRC01)
 #else	/* we must activate GPL5 in the SIUMCR for CAN */
-#define CFG_SIUMCR	(SIUMCR_DBGC11 | SIUMCR_DBPC00 | SIUMCR_MLRC01)
+#define CONFIG_SYS_SIUMCR	(SIUMCR_DBGC11 | SIUMCR_DBPC00 | SIUMCR_MLRC01)
 #endif	/* CONFIG_CAN_DRIVER */
 
 /*-----------------------------------------------------------------------
@@ -306,20 +308,20 @@
  *-----------------------------------------------------------------------
  * Clear Reference Interrupt Status, Timebase freezing enabled
  */
-#define CFG_TBSCR	(TBSCR_REFA | TBSCR_REFB | TBSCR_TBF)
+#define CONFIG_SYS_TBSCR	(TBSCR_REFA | TBSCR_REFB | TBSCR_TBF)
 
 /*-----------------------------------------------------------------------
  * RTCSC - Real-Time Clock Status and Control Register		11-27
  *-----------------------------------------------------------------------
  */
-#define CFG_RTCSC	(RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE)
+#define CONFIG_SYS_RTCSC	(RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE)
 
 /*-----------------------------------------------------------------------
  * PISCR - Periodic Interrupt Status and Control		11-31
  *-----------------------------------------------------------------------
  * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
  */
-#define CFG_PISCR	(PISCR_PS | PISCR_PITF)
+#define CONFIG_SYS_PISCR	(PISCR_PS | PISCR_PITF)
 
 /*-----------------------------------------------------------------------
  * PLPRCR - PLL, Low-Power, and Reset Control Register		15-30
@@ -327,7 +329,7 @@
  * Reset PLL lock status sticky bit, timer expired status bit and timer
  * interrupt status bit
  */
-#define CFG_PLPRCR	(PLPRCR_SPLSS | PLPRCR_TEXPS | PLPRCR_TMIST)
+#define CONFIG_SYS_PLPRCR	(PLPRCR_SPLSS | PLPRCR_TEXPS | PLPRCR_TMIST)
 
 /*-----------------------------------------------------------------------
  * SCCR - System Clock and reset Control Register		15-27
@@ -336,7 +338,7 @@
  * power management and some other internal clocks
  */
 #define SCCR_MASK	SCCR_EBDF11
-#define CFG_SCCR	(SCCR_COM00   | SCCR_DFSYNC00 | SCCR_DFBRG00  | \
+#define CONFIG_SYS_SCCR	(SCCR_COM00   | SCCR_DFSYNC00 | SCCR_DFBRG00  | \
 			 SCCR_DFNL000 | SCCR_DFNH000  | SCCR_DFLCD000 | \
 			 SCCR_DFALCD00)
 
@@ -345,14 +347,14 @@
  *-----------------------------------------------------------------------
  *
  */
-#define CFG_PCMCIA_MEM_ADDR	(0xE0000000)
-#define CFG_PCMCIA_MEM_SIZE	( 64 << 20 )
-#define CFG_PCMCIA_DMA_ADDR	(0xE4000000)
-#define CFG_PCMCIA_DMA_SIZE	( 64 << 20 )
-#define CFG_PCMCIA_ATTRB_ADDR	(0xE8000000)
-#define CFG_PCMCIA_ATTRB_SIZE	( 64 << 20 )
-#define CFG_PCMCIA_IO_ADDR	(0xEC000000)
-#define CFG_PCMCIA_IO_SIZE	( 64 << 20 )
+#define CONFIG_SYS_PCMCIA_MEM_ADDR	(0xE0000000)
+#define CONFIG_SYS_PCMCIA_MEM_SIZE	( 64 << 20 )
+#define CONFIG_SYS_PCMCIA_DMA_ADDR	(0xE4000000)
+#define CONFIG_SYS_PCMCIA_DMA_SIZE	( 64 << 20 )
+#define CONFIG_SYS_PCMCIA_ATTRB_ADDR	(0xE8000000)
+#define CONFIG_SYS_PCMCIA_ATTRB_SIZE	( 64 << 20 )
+#define CONFIG_SYS_PCMCIA_IO_ADDR	(0xEC000000)
+#define CONFIG_SYS_PCMCIA_IO_SIZE	( 64 << 20 )
 
 /*-----------------------------------------------------------------------
  * IDE/ATA stuff (Supports IDE harddisk on PCMCIA Adapter)
@@ -365,28 +367,28 @@
 #undef	CONFIG_IDE_LED			/* LED   for ide not supported	*/
 #undef	CONFIG_IDE_RESET		/* reset for ide not supported	*/
 
-#define CFG_IDE_MAXBUS		1	/* max. 1 IDE bus		*/
-#define CFG_IDE_MAXDEVICE	1	/* max. 1 drive per IDE bus	*/
+#define CONFIG_SYS_IDE_MAXBUS		1	/* max. 1 IDE bus		*/
+#define CONFIG_SYS_IDE_MAXDEVICE	1	/* max. 1 drive per IDE bus	*/
 
-#define CFG_ATA_IDE0_OFFSET	0x0000
+#define CONFIG_SYS_ATA_IDE0_OFFSET	0x0000
 
-#define CFG_ATA_BASE_ADDR	CFG_PCMCIA_MEM_ADDR
+#define CONFIG_SYS_ATA_BASE_ADDR	CONFIG_SYS_PCMCIA_MEM_ADDR
 
 /* Offset for data I/O			*/
-#define CFG_ATA_DATA_OFFSET	(CFG_PCMCIA_MEM_SIZE + 0x320)
+#define CONFIG_SYS_ATA_DATA_OFFSET	(CONFIG_SYS_PCMCIA_MEM_SIZE + 0x320)
 
 /* Offset for normal register accesses	*/
-#define CFG_ATA_REG_OFFSET	(2 * CFG_PCMCIA_MEM_SIZE + 0x320)
+#define CONFIG_SYS_ATA_REG_OFFSET	(2 * CONFIG_SYS_PCMCIA_MEM_SIZE + 0x320)
 
 /* Offset for alternate registers	*/
-#define CFG_ATA_ALT_OFFSET	0x0100
+#define CONFIG_SYS_ATA_ALT_OFFSET	0x0100
 
 /*-----------------------------------------------------------------------
  *
  *-----------------------------------------------------------------------
  *
  */
-#define CFG_DER	0
+#define CONFIG_SYS_DER	0
 
 /*
  * Init Memory Controller:
@@ -401,22 +403,22 @@
  * restrict access enough to keep SRAM working (if any)
  * but not too much to meddle with FLASH accesses
  */
-#define CFG_REMAP_OR_AM		0x80000000	/* OR addr mask */
-#define CFG_PRELIM_OR_AM	0xE0000000	/* OR addr mask */
+#define CONFIG_SYS_REMAP_OR_AM		0x80000000	/* OR addr mask */
+#define CONFIG_SYS_PRELIM_OR_AM	0xE0000000	/* OR addr mask */
 
 /*
  * FLASH timing:
  */
-#define CFG_OR_TIMING_FLASH	(OR_ACS_DIV1  | OR_TRLX | OR_CSNT_SAM | \
+#define CONFIG_SYS_OR_TIMING_FLASH	(OR_ACS_DIV1  | OR_TRLX | OR_CSNT_SAM | \
 				 OR_SCY_3_CLK | OR_EHTR | OR_BI)
 
-#define CFG_OR0_REMAP	(CFG_REMAP_OR_AM  | CFG_OR_TIMING_FLASH)
-#define CFG_OR0_PRELIM	(CFG_PRELIM_OR_AM | CFG_OR_TIMING_FLASH)
-#define CFG_BR0_PRELIM	((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_V )
+#define CONFIG_SYS_OR0_REMAP	(CONFIG_SYS_REMAP_OR_AM  | CONFIG_SYS_OR_TIMING_FLASH)
+#define CONFIG_SYS_OR0_PRELIM	(CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_FLASH)
+#define CONFIG_SYS_BR0_PRELIM	((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_V )
 
-#define CFG_OR1_REMAP	CFG_OR0_REMAP
-#define CFG_OR1_PRELIM	CFG_OR0_PRELIM
-#define CFG_BR1_PRELIM	((FLASH_BASE1_PRELIM & BR_BA_MSK) | BR_V )
+#define CONFIG_SYS_OR1_REMAP	CONFIG_SYS_OR0_REMAP
+#define CONFIG_SYS_OR1_PRELIM	CONFIG_SYS_OR0_PRELIM
+#define CONFIG_SYS_BR1_PRELIM	((FLASH_BASE1_PRELIM & BR_BA_MSK) | BR_V )
 
 /*
  * BR2/3 and OR2/3 (SDRAM)
@@ -427,19 +429,19 @@
 #define	SDRAM_MAX_SIZE		0x04000000	/* max 64 MB per bank	*/
 
 /* SDRAM timing: Multiplexed addresses, GPL5 output to GPL5_A (don't care)	*/
-#define CFG_OR_TIMING_SDRAM	0x00000A00
+#define CONFIG_SYS_OR_TIMING_SDRAM	0x00000A00
 
-#define CFG_OR2_PRELIM	(CFG_PRELIM_OR_AM | CFG_OR_TIMING_SDRAM )
-#define CFG_BR2_PRELIM	((SDRAM_BASE2_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
+#define CONFIG_SYS_OR2_PRELIM	(CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_SDRAM )
+#define CONFIG_SYS_BR2_PRELIM	((SDRAM_BASE2_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
 
 #ifndef	CONFIG_CAN_DRIVER
-#define	CFG_OR3_PRELIM	CFG_OR2_PRELIM
-#define CFG_BR3_PRELIM	((SDRAM_BASE3_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
+#define	CONFIG_SYS_OR3_PRELIM	CONFIG_SYS_OR2_PRELIM
+#define CONFIG_SYS_BR3_PRELIM	((SDRAM_BASE3_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
 #else	/* CAN uses CS3#, so we can have only one SDRAM bank anyway */
-#define	CFG_CAN_BASE		0xC0000000	/* CAN mapped at 0xC0000000	*/
-#define CFG_CAN_OR_AM		0xFFFF8000	/* 32 kB address mask		*/
-#define CFG_OR3_CAN		(CFG_CAN_OR_AM | OR_G5LA | OR_BI)
-#define CFG_BR3_CAN		((CFG_CAN_BASE & BR_BA_MSK) | \
+#define	CONFIG_SYS_CAN_BASE		0xC0000000	/* CAN mapped at 0xC0000000	*/
+#define CONFIG_SYS_CAN_OR_AM		0xFFFF8000	/* 32 kB address mask		*/
+#define CONFIG_SYS_OR3_CAN		(CONFIG_SYS_CAN_OR_AM | OR_G5LA | OR_BI)
+#define CONFIG_SYS_BR3_CAN		((CONFIG_SYS_CAN_BASE & BR_BA_MSK) | \
 					BR_PS_8 | BR_MS_UPMB | BR_V )
 #endif	/* CONFIG_CAN_DRIVER */
 
@@ -470,34 +472,34 @@
  * 80 Mhz => 80.000.000 / Divider = 156
  */
 
-#define CFG_PTA_PER_CLK	((4096 * 32 * 1000) / (4 * 64))
-#define CFG_MAMR_PTA	98
+#define CONFIG_SYS_PTA_PER_CLK	((4096 * 32 * 1000) / (4 * 64))
+#define CONFIG_SYS_MAMR_PTA	98
 
 /*
  * For 16 MBit, refresh rates could be 31.3 us
  * (= 64 ms / 2K = 125 / quad bursts).
  * For a simpler initialization, 15.6 us is used instead.
  *
- * #define CFG_MPTPR_2BK_2K	MPTPR_PTP_DIV32		for 2 banks
- * #define CFG_MPTPR_1BK_2K	MPTPR_PTP_DIV64		for 1 bank
+ * #define CONFIG_SYS_MPTPR_2BK_2K	MPTPR_PTP_DIV32		for 2 banks
+ * #define CONFIG_SYS_MPTPR_1BK_2K	MPTPR_PTP_DIV64		for 1 bank
  */
-#define CFG_MPTPR_2BK_4K	MPTPR_PTP_DIV16		/* setting for 2 banks	*/
-#define CFG_MPTPR_1BK_4K	MPTPR_PTP_DIV32		/* setting for 1 bank	*/
+#define CONFIG_SYS_MPTPR_2BK_4K	MPTPR_PTP_DIV16		/* setting for 2 banks	*/
+#define CONFIG_SYS_MPTPR_1BK_4K	MPTPR_PTP_DIV32		/* setting for 1 bank	*/
 
 /* refresh rate 7.8 us (= 64 ms / 8K = 31.2 / quad bursts) for 256 MBit		*/
-#define CFG_MPTPR_2BK_8K	MPTPR_PTP_DIV8		/* setting for 2 banks	*/
-#define CFG_MPTPR_1BK_8K	MPTPR_PTP_DIV16		/* setting for 1 bank	*/
+#define CONFIG_SYS_MPTPR_2BK_8K	MPTPR_PTP_DIV8		/* setting for 2 banks	*/
+#define CONFIG_SYS_MPTPR_1BK_8K	MPTPR_PTP_DIV16		/* setting for 1 bank	*/
 
 /*
  * MAMR settings for SDRAM
  */
 
 /* 8 column SDRAM */
-#define CFG_MAMR_8COL	((CFG_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
+#define CONFIG_SYS_MAMR_8COL	((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
 			 MAMR_AMA_TYPE_0 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A11 |	\
 			 MAMR_RLFA_1X	 | MAMR_WLFA_1X	   | MAMR_TLFA_4X)
 /* 9 column SDRAM */
-#define CFG_MAMR_9COL	((CFG_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
+#define CONFIG_SYS_MAMR_9COL	((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
 			 MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 |	\
 			 MAMR_RLFA_1X	 | MAMR_WLFA_1X	   | MAMR_TLFA_4X)
 
diff --git a/include/configs/TQM85xx.h b/include/configs/TQM85xx.h
index 5e1cf956f..6d205a7a1 100644
--- a/include/configs/TQM85xx.h
+++ b/include/configs/TQM85xx.h
@@ -106,36 +106,35 @@
  */
 #define CONFIG_L2_CACHE			/* toggle L2 cache		*/
 #define CONFIG_BTB			/* toggle branch predition	*/
-#define CONFIG_ADDR_STREAMING		/* toggle addr streaming	*/
 
-#define CFG_INIT_DBCR DBCR_IDM		/* Enable Debug Exceptions	*/
+#define CONFIG_SYS_INIT_DBCR DBCR_IDM		/* Enable Debug Exceptions	*/
 
-#undef	CFG_DRAM_TEST			/* memory test, takes time	*/
-#define CFG_MEMTEST_START	0x00000000
-#define CFG_MEMTEST_END		0x10000000
+#undef	CONFIG_SYS_DRAM_TEST			/* memory test, takes time	*/
+#define CONFIG_SYS_MEMTEST_START	0x00000000
+#define CONFIG_SYS_MEMTEST_END		0x10000000
 
 /*
  * Base addresses -- Note these are effective addresses where the
  * actual resources get mapped (not physical addresses)
  */
-#define CFG_CCSRBAR_DEFAULT	0xFF700000	/* CCSRBAR Default	*/
+#define CONFIG_SYS_CCSRBAR_DEFAULT	0xFF700000	/* CCSRBAR Default	*/
 #ifdef CONFIG_TQM_BIGFLASH
-#define CFG_CCSRBAR	 	0xA0000000	/* relocated CCSRBAR	*/
+#define CONFIG_SYS_CCSRBAR	 	0xA0000000	/* relocated CCSRBAR	*/
 #else /* !CONFIG_TQM_BIGFLASH */
-#define CFG_CCSRBAR		0xE0000000	/* relocated CCSRBAR	*/
+#define CONFIG_SYS_CCSRBAR		0xE0000000	/* relocated CCSRBAR	*/
 #endif /* CONFIG_TQM_BIGFLASH */
-#define CFG_CCSRBAR_PHYS	CFG_CCSRBAR	/* physical addr of CCSRBAR */
-#define CFG_IMMR		CFG_CCSRBAR	/* PQII uses CFG_IMMR	*/
+#define CONFIG_SYS_CCSRBAR_PHYS	CONFIG_SYS_CCSRBAR	/* physical addr of CCSRBAR */
+#define CONFIG_SYS_IMMR		CONFIG_SYS_CCSRBAR	/* PQII uses CONFIG_SYS_IMMR	*/
 
-#define CFG_PCI1_ADDR		(CFG_CCSRBAR + 0x8000)
-#define CFG_PCI2_ADDR		(CFG_CCSRBAR + 0x9000)
-#define CFG_PCIE1_ADDR		(CFG_CCSRBAR + 0xa000)
+#define CONFIG_SYS_PCI1_ADDR		(CONFIG_SYS_CCSRBAR + 0x8000)
+#define CONFIG_SYS_PCI2_ADDR		(CONFIG_SYS_CCSRBAR + 0x9000)
+#define CONFIG_SYS_PCIE1_ADDR		(CONFIG_SYS_CCSRBAR + 0xa000)
 
 /*
  * DDR Setup
  */
-#define CFG_DDR_SDRAM_BASE	0x00000000	/* DDR is system memory	*/
-#define CFG_SDRAM_BASE		CFG_DDR_SDRAM_BASE
+#define CONFIG_SYS_DDR_SDRAM_BASE	0x00000000	/* DDR is system memory	*/
+#define CONFIG_SYS_SDRAM_BASE		CONFIG_SYS_DDR_SDRAM_BASE
 
 #define CONFIG_NUM_DDR_CONTROLLERS	1
 #define CONFIG_DIMM_SLOTS_PER_CTLR	1
@@ -165,16 +164,16 @@
  * Flash on the Local Bus
  */
 #ifdef CONFIG_TQM_BIGFLASH
-#define CFG_FLASH0		0xE0000000
-#define CFG_FLASH1		0xC0000000
+#define CONFIG_SYS_FLASH0		0xE0000000
+#define CONFIG_SYS_FLASH1		0xC0000000
 #else /* !CONFIG_TQM_BIGFLASH */
-#define CFG_FLASH0		0xFC000000
-#define CFG_FLASH1		0xF8000000
+#define CONFIG_SYS_FLASH0		0xFC000000
+#define CONFIG_SYS_FLASH1		0xF8000000
 #endif /* CONFIG_TQM_BIGFLASH */
-#define CFG_FLASH_BANKS_LIST	{ CFG_FLASH1, CFG_FLASH0 }
+#define CONFIG_SYS_FLASH_BANKS_LIST	{ CONFIG_SYS_FLASH1, CONFIG_SYS_FLASH0 }
 
-#define CFG_LBC_FLASH_BASE	CFG_FLASH1	/* Localbus flash start	*/
-#define CFG_FLASH_BASE		CFG_LBC_FLASH_BASE  /* start of FLASH	*/
+#define CONFIG_SYS_LBC_FLASH_BASE	CONFIG_SYS_FLASH1	/* Localbus flash start	*/
+#define CONFIG_SYS_FLASH_BASE		CONFIG_SYS_LBC_FLASH_BASE  /* start of FLASH	*/
 
 /* Default ORx timings are for <= 41.7 MHz Local Bus Clock.
  *
@@ -183,7 +182,7 @@
  *
  * For other Local Bus Clocks see following table:
  *
- * Clock/MHz   CFG_ORx_PRELIM
+ * Clock/MHz   CONFIG_SYS_ORx_PRELIM
  * 166         0x.....CA5
  * 133         0x.....C85
  * 100         0x.....C65
@@ -196,56 +195,55 @@
  *
  */
 #ifdef CONFIG_TQM_BIGFLASH
-#define CFG_BR0_PRELIM		0xE0001801	/* port size 32bit	*/
-#define CFG_OR0_PRELIM		0xE0000040	/* 512MB Flash		*/
-#define CFG_BR1_PRELIM		0xC0001801	/* port size 32bit	*/
-#define CFG_OR1_PRELIM		0xE0000040	/* 512MB Flash		*/
+#define CONFIG_SYS_BR0_PRELIM		0xE0001801	/* port size 32bit	*/
+#define CONFIG_SYS_OR0_PRELIM		0xE0000040	/* 512MB Flash		*/
+#define CONFIG_SYS_BR1_PRELIM		0xC0001801	/* port size 32bit	*/
+#define CONFIG_SYS_OR1_PRELIM		0xE0000040	/* 512MB Flash		*/
 #else /* !CONFIG_TQM_BIGFLASH */
-#define CFG_BR0_PRELIM		0xfc001801	/* port size 32bit	*/
-#define CFG_OR0_PRELIM		0xfc000040	/* 64MB Flash		*/
-#define CFG_BR1_PRELIM		0xf8001801	/* port size 32bit	*/
-#define CFG_OR1_PRELIM		0xfc000040	/* 64MB Flash		*/
+#define CONFIG_SYS_BR0_PRELIM		0xfc001801	/* port size 32bit	*/
+#define CONFIG_SYS_OR0_PRELIM		0xfc000040	/* 64MB Flash		*/
+#define CONFIG_SYS_BR1_PRELIM		0xf8001801	/* port size 32bit	*/
+#define CONFIG_SYS_OR1_PRELIM		0xfc000040	/* 64MB Flash		*/
 #endif /* CONFIG_TQM_BIGFLASH */
 
-#define CFG_FLASH_CFI			/* flash is CFI compat.		*/
+#define CONFIG_SYS_FLASH_CFI			/* flash is CFI compat.		*/
 #define CONFIG_FLASH_CFI_DRIVER		/* Use common CFI driver	*/
-#define CFG_FLASH_EMPTY_INFO		/* print 'E' for empty sector	*/
-#define CFG_FLASH_QUIET_TEST	1	/* don't warn upon unknown flash*/
-#define CFG_FLASH_USE_BUFFER_WRITE	1 /* speed up output to Flash	*/
+#define CONFIG_SYS_FLASH_EMPTY_INFO		/* print 'E' for empty sector	*/
+#define CONFIG_SYS_FLASH_QUIET_TEST	1	/* don't warn upon unknown flash*/
+#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE	1 /* speed up output to Flash	*/
 
-#define CFG_MAX_FLASH_BANKS	2	/* number of banks		*/
-#define CFG_MAX_FLASH_SECT	512	/* sectors per device		*/
-#undef	CFG_FLASH_CHECKSUM
-#define CFG_FLASH_ERASE_TOUT	60000	/* Flash Erase Timeout (ms)	*/
-#define CFG_FLASH_WRITE_TOUT	500	/* Flash Write Timeout (ms)	*/
+#define CONFIG_SYS_MAX_FLASH_BANKS	2	/* number of banks		*/
+#define CONFIG_SYS_MAX_FLASH_SECT	512	/* sectors per device		*/
+#undef	CONFIG_SYS_FLASH_CHECKSUM
+#define CONFIG_SYS_FLASH_ERASE_TOUT	60000	/* Flash Erase Timeout (ms)	*/
+#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Flash Write Timeout (ms)	*/
 
-#define CFG_MONITOR_BASE	TEXT_BASE	/* start of monitor	*/
+#define CONFIG_SYS_MONITOR_BASE	TEXT_BASE	/* start of monitor	*/
 
 /*
  * Note: when changing the Local Bus clock divider you have to
- * change the timing values in CFG_ORx_PRELIM.
+ * change the timing values in CONFIG_SYS_ORx_PRELIM.
  *
  * LCRR[00:03] CLKDIV: System (CCB) clock divider. Valid values are 2, 4, 8.
  * LCRR[16:17] EADC  : External address delay cycles. It should be set to 2
  *                     for Local Bus Clock > 83.3 MHz.
  */
-#define CFG_LBC_LCRR		0x00030008	/* LB clock ratio reg	*/
-#define CFG_LBC_LBCR		0x00000000	/* LB config reg	*/
-#define CFG_LBC_LSRT		0x20000000	/* LB sdram refresh timer */
-#define CFG_LBC_MRTPR		0x20000000	/* LB refresh timer presc.*/
-
-#define CONFIG_L1_INIT_RAM
-#define CFG_INIT_RAM_LOCK	1
-#define CFG_INIT_RAM_ADDR	(CFG_CCSRBAR \
+#define CONFIG_SYS_LBC_LCRR		0x00030008	/* LB clock ratio reg	*/
+#define CONFIG_SYS_LBC_LBCR		0x00000000	/* LB config reg	*/
+#define CONFIG_SYS_LBC_LSRT		0x20000000	/* LB sdram refresh timer */
+#define CONFIG_SYS_LBC_MRTPR		0x20000000	/* LB refresh timer presc.*/
+
+#define CONFIG_SYS_INIT_RAM_LOCK	1
+#define CONFIG_SYS_INIT_RAM_ADDR	(CONFIG_SYS_CCSRBAR \
 				 + 0x04010000)	/* Initial RAM address	*/
-#define CFG_INIT_RAM_END	0x4000		/* End used area in RAM	*/
+#define CONFIG_SYS_INIT_RAM_END	0x4000		/* End used area in RAM	*/
 
-#define CFG_GBL_DATA_SIZE	128	/* num bytes initial data	*/
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_GBL_DATA_SIZE	128	/* num bytes initial data	*/
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
-#define CFG_MONITOR_LEN		(~TEXT_BASE + 1)/* Reserved for Monitor	*/
-#define CFG_MALLOC_LEN		(384 * 1024)	/* Reserved for malloc	*/
+#define CONFIG_SYS_MONITOR_LEN		(~TEXT_BASE + 1)/* Reserved for Monitor	*/
+#define CONFIG_SYS_MALLOC_LEN		(384 * 1024)	/* Reserved for malloc	*/
 
 /* Serial Port */
 #if defined(CONFIG_TQM8560)
@@ -258,32 +256,32 @@
 
 #define CONFIG_CONS_INDEX     1
 #undef	CONFIG_SERIAL_SOFTWARE_FIFO
-#define CFG_NS16550
-#define CFG_NS16550_SERIAL
-#define CFG_NS16550_REG_SIZE	1
-#define CFG_NS16550_CLK		get_bus_freq(0)
+#define CONFIG_SYS_NS16550
+#define CONFIG_SYS_NS16550_SERIAL
+#define CONFIG_SYS_NS16550_REG_SIZE	1
+#define CONFIG_SYS_NS16550_CLK		get_bus_freq(0)
 
-#define CFG_NS16550_COM1	(CFG_CCSRBAR+0x4500)
-#define CFG_NS16550_COM2	(CFG_CCSRBAR+0x4600)
+#define CONFIG_SYS_NS16550_COM1	(CONFIG_SYS_CCSRBAR+0x4500)
+#define CONFIG_SYS_NS16550_COM2	(CONFIG_SYS_CCSRBAR+0x4600)
 
 /* PS/2 Keyboard */
 #define CONFIG_PS2KBD			/* AT-PS/2 Keyboard		*/
 #define CONFIG_PS2MULT			/* .. on PS/2 Multiplexer	*/
 #define CONFIG_PS2SERIAL	2	/* .. on DUART2			*/
-#define CONFIG_PS2MULT_DELAY	(CFG_HZ/2)	/* Initial delay	*/
+#define CONFIG_PS2MULT_DELAY	(CONFIG_SYS_HZ/2)	/* Initial delay	*/
 #define CONFIG_BOARD_EARLY_INIT_R	1
 
 #endif /* CONFIG_TQM8560 */
 
 #define CONFIG_BAUDRATE		115200
 
-#define CFG_BAUDRATE_TABLE	\
+#define CONFIG_SYS_BAUDRATE_TABLE	\
 	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 115200}
 
 #define CONFIG_CMDLINE_EDITING	1	/* add command line history	*/
-#define CFG_HUSH_PARSER		1	/* Use the HUSH parser		*/
-#ifdef	CFG_HUSH_PARSER
-#define	CFG_PROMPT_HUSH_PS2	"> "
+#define CONFIG_SYS_HUSH_PARSER		1	/* Use the HUSH parser		*/
+#ifdef	CONFIG_SYS_HUSH_PARSER
+#define	CONFIG_SYS_PROMPT_HUSH_PS2	"> "
 #endif
 
 /* pass open firmware flat tree */
@@ -292,12 +290,12 @@
 #define CONFIG_OF_STDOUT_VIA_ALIAS	1
 
 /* CAN */
-#define CFG_CAN_BASE		(CFG_CCSRBAR \
+#define CONFIG_SYS_CAN_BASE		(CONFIG_SYS_CCSRBAR \
 				 + 0x03000000)	/* CAN base address     */
 #ifdef CONFIG_CAN_DRIVER
-#define CFG_CAN_OR_AM		0xFFFF8000	/* 32 KiB address mask  */
-#define CFG_OR2_CAN		(CFG_CAN_OR_AM | OR_UPM_BI)
-#define CFG_BR2_CAN		((CFG_CAN_BASE & BR_BA) | \
+#define CONFIG_SYS_CAN_OR_AM		0xFFFF8000	/* 32 KiB address mask  */
+#define CONFIG_SYS_OR2_CAN		(CONFIG_SYS_CAN_OR_AM | OR_UPM_BI)
+#define CONFIG_SYS_BR2_CAN		((CONFIG_SYS_CAN_BASE & BR_BA) | \
 				 BR_PS_8 | BR_MS_UPMC | BR_V)
 #endif /* CONFIG_CAN_DRIVER */
 
@@ -307,43 +305,42 @@
 #define CONFIG_FSL_I2C			/* Use FSL common I2C driver	*/
 #define CONFIG_HARD_I2C			/* I2C with hardware support	*/
 #undef	CONFIG_SOFT_I2C			/* I2C bit-banged		*/
-#define CFG_I2C_SPEED		400000	/* I2C speed and slave address	*/
-#define CFG_I2C_SLAVE		0x7F
-#define CFG_I2C_NOPROBES	{0x48}	/* Don't probe these addrs	*/
-#define CFG_I2C_OFFSET		0x3000
+#define CONFIG_SYS_I2C_SPEED		400000	/* I2C speed and slave address	*/
+#define CONFIG_SYS_I2C_SLAVE		0x7F
+#define CONFIG_SYS_I2C_NOPROBES	{0x48}	/* Don't probe these addrs	*/
+#define CONFIG_SYS_I2C_OFFSET		0x3000
 
 /* I2C RTC */
 #define CONFIG_RTC_DS1337		/* Use ds1337 rtc via i2c	*/
-#define CFG_I2C_RTC_ADDR	0x68	/* at address 0x68		*/
+#define CONFIG_SYS_I2C_RTC_ADDR	0x68	/* at address 0x68		*/
 
 /* I2C EEPROM */
 /*
  * EEPROM configuration for onboard EEPROM M24C32 (M24C64 should work also).
  */
-#define CFG_I2C_EEPROM_ADDR		0x50	/* 1010000x		*/
-#define CFG_I2C_EEPROM_ADDR_LEN		2
-#define CFG_EEPROM_PAGE_WRITE_BITS	5	/* =32 Bytes per write	*/
-#define CFG_EEPROM_PAGE_WRITE_ENABLE
-#define CFG_EEPROM_PAGE_WRITE_DELAY_MS	20
-#define CFG_I2C_MULTI_EEPROMS		1	/* more than one eeprom	*/
+#define CONFIG_SYS_I2C_EEPROM_ADDR		0x50	/* 1010000x		*/
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN		2
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS	5	/* =32 Bytes per write	*/
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	20
+#define CONFIG_SYS_I2C_MULTI_EEPROMS		1	/* more than one eeprom	*/
 
 /* I2C SYSMON (LM75) */
 #define CONFIG_DTT_LM75		1		/* ON Semi's LM75	*/
 #define CONFIG_DTT_SENSORS	{0}		/* Sensor addresses	*/
-#define CFG_DTT_MAX_TEMP	70
-#define CFG_DTT_LOW_TEMP	-30
-#define CFG_DTT_HYSTERESIS	3
+#define CONFIG_SYS_DTT_MAX_TEMP	70
+#define CONFIG_SYS_DTT_LOW_TEMP	-30
+#define CONFIG_SYS_DTT_HYSTERESIS	3
 
 #ifndef CONFIG_PCIE1
 /* RapidIO MMU */
 #ifdef CONFIG_TQM_BIGFLASH
-#define CFG_RIO_MEM_BASE	0xb0000000	/* base address		*/
-#define CFG_RIO_MEM_SIZE	0x10000000	/* 256M			*/
+#define CONFIG_SYS_RIO_MEM_BASE	0xb0000000	/* base address		*/
+#define CONFIG_SYS_RIO_MEM_SIZE	0x10000000	/* 256M			*/
 #else /* !CONFIG_TQM_BIGFLASH */
-#define CFG_RIO_MEM_BASE	0xc0000000	/* base address		*/
-#define CFG_RIO_MEM_SIZE	0x20000000	/* 512M			*/
+#define CONFIG_SYS_RIO_MEM_BASE	0xc0000000	/* base address		*/
+#define CONFIG_SYS_RIO_MEM_SIZE	0x20000000	/* 512M			*/
 #endif /* CONFIG_TQM_BIGFLASH */
-#define CFG_RIO_MEM_PHYS	CFG_RIO_MEM_BASE
+#define CONFIG_SYS_RIO_MEM_PHYS	CONFIG_SYS_RIO_MEM_BASE
 #endif /* CONFIG_PCIE1 */
 
 /* NAND FLASH */
@@ -356,38 +353,38 @@
 #define	CONFIG_MTD_NAND_ECC_JFFS2	1	/* use JFFS2 ECC	*/
 
 /* address distance between chip selects */
-#define	CFG_NAND_SELECT_DEVICE	1
-#define	CFG_NAND_CS_DIST	0x200
+#define	CONFIG_SYS_NAND_SELECT_DEVICE	1
+#define	CONFIG_SYS_NAND_CS_DIST	0x200
 
-#define CFG_NAND_SIZE		0x8000
-#define CFG_NAND0_BASE		(CFG_CCSRBAR + 0x03010000)
-#define CFG_NAND1_BASE		(CFG_NAND0_BASE + CFG_NAND_CS_DIST)
-#define CFG_NAND2_BASE		(CFG_NAND1_BASE + CFG_NAND_CS_DIST)
-#define CFG_NAND3_BASE		(CFG_NAND2_BASE + CFG_NAND_CS_DIST)
+#define CONFIG_SYS_NAND_SIZE		0x8000
+#define CONFIG_SYS_NAND0_BASE		(CONFIG_SYS_CCSRBAR + 0x03010000)
+#define CONFIG_SYS_NAND1_BASE		(CONFIG_SYS_NAND0_BASE + CONFIG_SYS_NAND_CS_DIST)
+#define CONFIG_SYS_NAND2_BASE		(CONFIG_SYS_NAND1_BASE + CONFIG_SYS_NAND_CS_DIST)
+#define CONFIG_SYS_NAND3_BASE		(CONFIG_SYS_NAND2_BASE + CONFIG_SYS_NAND_CS_DIST)
 
-#define CFG_MAX_NAND_DEVICE     2	/* Max number of NAND devices	*/
+#define CONFIG_SYS_MAX_NAND_DEVICE     2	/* Max number of NAND devices	*/
 #define NAND_MAX_CHIPS		1
 
-#if (CFG_MAX_NAND_DEVICE == 1)
-#define CFG_NAND_BASE_LIST { CFG_NAND0_BASE }
-#elif (CFG_MAX_NAND_DEVICE == 2)
-#define	CFG_NAND_QUIET_TEST	1
-#define CFG_NAND_BASE_LIST { CFG_NAND0_BASE, \
-			     CFG_NAND1_BASE, \
+#if (CONFIG_SYS_MAX_NAND_DEVICE == 1)
+#define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND0_BASE }
+#elif (CONFIG_SYS_MAX_NAND_DEVICE == 2)
+#define	CONFIG_SYS_NAND_QUIET_TEST	1
+#define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND0_BASE, \
+			     CONFIG_SYS_NAND1_BASE, \
 }
-#elif (CFG_MAX_NAND_DEVICE == 4)
-#define	CFG_NAND_QUIET_TEST	1
-#define CFG_NAND_BASE_LIST { CFG_NAND0_BASE, \
-			     CFG_NAND1_BASE, \
-			     CFG_NAND2_BASE, \
-			     CFG_NAND3_BASE, \
+#elif (CONFIG_SYS_MAX_NAND_DEVICE == 4)
+#define	CONFIG_SYS_NAND_QUIET_TEST	1
+#define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND0_BASE, \
+			     CONFIG_SYS_NAND1_BASE, \
+			     CONFIG_SYS_NAND2_BASE, \
+			     CONFIG_SYS_NAND3_BASE, \
 }
 #endif
 
 /* CS3 for NAND Flash */
-#define CFG_BR3_PRELIM		((CFG_NAND0_BASE & BR_BA) | BR_PS_8 | \
+#define CONFIG_SYS_BR3_PRELIM		((CONFIG_SYS_NAND0_BASE & BR_BA) | BR_PS_8 | \
 				 BR_MS_UPMB | BR_V)
-#define CFG_OR3_PRELIM		(P2SZ_TO_AM(CFG_NAND_SIZE) | OR_UPM_BI)
+#define CONFIG_SYS_OR3_PRELIM		(P2SZ_TO_AM(CONFIG_SYS_NAND_SIZE) | OR_UPM_BI)
 
 #define NAND_BIG_DELAY_US       25	/* max tR for Samsung devices	*/
 
@@ -397,17 +394,12 @@
  * General PCI
  * Addresses are mapped 1-1.
  */
-#define CFG_PCI1_MEM_BASE	0x80000000
-#define CFG_PCI1_MEM_PHYS	CFG_PCI1_MEM_BASE
-#define CFG_PCI1_MEM_SIZE	0x20000000	/* 512M			*/
-#define CFG_PCI1_IO_BASE	(CFG_CCSRBAR + 0x02000000)
-#define CFG_PCI1_IO_PHYS	CFG_PCI1_IO_BASE
-#define CFG_PCI1_IO_SIZE	0x1000000	/*  16M			*/
-
-/* PCI view of System Memory */
-#define CFG_PCI_MEMORY_BUS	0x00000000
-#define CFG_PCI_MEMORY_PHYS	0x00000000
-#define CFG_PCI_MEMORY_SIZE	0x80000000
+#define CONFIG_SYS_PCI1_MEM_BASE	0x80000000
+#define CONFIG_SYS_PCI1_MEM_PHYS	CONFIG_SYS_PCI1_MEM_BASE
+#define CONFIG_SYS_PCI1_MEM_SIZE	0x20000000	/* 512M			*/
+#define CONFIG_SYS_PCI1_IO_BASE	(CONFIG_SYS_CCSRBAR + 0x02000000)
+#define CONFIG_SYS_PCI1_IO_PHYS	CONFIG_SYS_PCI1_IO_BASE
+#define CONFIG_SYS_PCI1_IO_SIZE	0x1000000	/*  16M			*/
 
 #ifdef CONFIG_PCIE1
 /*
@@ -415,17 +407,17 @@
  * Addresses are mapped 1-1.
  */
 #ifdef CONFIG_TQM_BIGFLASH
-#define CFG_PCIE1_MEM_BASE	0xb0000000
-#define CFG_PCIE1_MEM_SIZE	0x10000000      /* 512M                 */
-#define CFG_PCIE1_IO_BASE	0xaf000000
+#define CONFIG_SYS_PCIE1_MEM_BASE	0xb0000000
+#define CONFIG_SYS_PCIE1_MEM_SIZE	0x10000000      /* 512M                 */
+#define CONFIG_SYS_PCIE1_IO_BASE	0xaf000000
 #else /* !CONFIG_TQM_BIGFLASH */
-#define CFG_PCIE1_MEM_BASE	0xc0000000
-#define CFG_PCIE1_MEM_SIZE	0x20000000      /* 512M                 */
-#define CFG_PCIE1_IO_BASE	0xef000000
+#define CONFIG_SYS_PCIE1_MEM_BASE	0xc0000000
+#define CONFIG_SYS_PCIE1_MEM_SIZE	0x20000000      /* 512M                 */
+#define CONFIG_SYS_PCIE1_IO_BASE	0xef000000
 #endif /* CONFIG_TQM_BIGFLASH */
-#define CFG_PCIE1_MEM_PHYS	CFG_PCIE1_MEM_BASE
-#define CFG_PCIE1_IO_PHYS	CFG_PCIE1_IO_BASE
-#define CFG_PCIE1_IO_SIZE	0x1000000       /* 16M                  */
+#define CONFIG_SYS_PCIE1_MEM_PHYS	CONFIG_SYS_PCIE1_MEM_BASE
+#define CONFIG_SYS_PCIE1_IO_PHYS	CONFIG_SYS_PCIE1_IO_BASE
+#define CONFIG_SYS_PCIE1_IO_SIZE	0x1000000       /* 16M                  */
 #endif /* CONFIG_PCIE1 */
 
 #if defined(CONFIG_PCI)
@@ -436,7 +428,7 @@
 #undef CONFIG_TULIP
 
 #undef CONFIG_PCI_SCAN_SHOW		/* show pci devices on startup	*/
-#define CFG_PCI_SUBSYS_VENDORID 0x1057	/* Motorola			*/
+#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x1057	/* Motorola			*/
 
 #endif /* CONFIG_PCI */
 
@@ -530,48 +522,48 @@
 
 #if defined(CONFIG_ETHER_ON_FCC) && (CONFIG_ETHER_INDEX == 1)
 #define CONFIG_ETHER_ON_FCC1
-#define CFG_CMXFCR_MASK1	(CMXFCR_FC1 | CMXFCR_RF1CS_MSK | \
+#define CONFIG_SYS_CMXFCR_MASK1	(CMXFCR_FC1 | CMXFCR_RF1CS_MSK | \
 				 CMXFCR_TF1CS_MSK)
-#define CFG_CMXFCR_VALUE1	(CMXFCR_RF1CS_CLK11 | CMXFCR_TF1CS_CLK12)
-#define CFG_CPMFCR_RAMTYPE	0
-#define CFG_FCC_PSMR		(FCC_PSMR_FDE | FCC_PSMR_LPB)
+#define CONFIG_SYS_CMXFCR_VALUE1	(CMXFCR_RF1CS_CLK11 | CMXFCR_TF1CS_CLK12)
+#define CONFIG_SYS_CPMFCR_RAMTYPE	0
+#define CONFIG_SYS_FCC_PSMR		(FCC_PSMR_FDE | FCC_PSMR_LPB)
 #endif
 
 #if defined(CONFIG_ETHER_ON_FCC) && (CONFIG_ETHER_INDEX == 2)
 #define CONFIG_ETHER_ON_FCC2
-#define CFG_CMXFCR_MASK2	(CMXFCR_FC2 | CMXFCR_RF2CS_MSK | \
+#define CONFIG_SYS_CMXFCR_MASK2	(CMXFCR_FC2 | CMXFCR_RF2CS_MSK | \
 				 CMXFCR_TF2CS_MSK)
-#define CFG_CMXFCR_VALUE2	(CMXFCR_RF2CS_CLK16 | CMXFCR_TF2CS_CLK13)
-#define CFG_CPMFCR_RAMTYPE	0
-#define CFG_FCC_PSMR		(FCC_PSMR_FDE | FCC_PSMR_LPB)
+#define CONFIG_SYS_CMXFCR_VALUE2	(CMXFCR_RF2CS_CLK16 | CMXFCR_TF2CS_CLK13)
+#define CONFIG_SYS_CPMFCR_RAMTYPE	0
+#define CONFIG_SYS_FCC_PSMR		(FCC_PSMR_FDE | FCC_PSMR_LPB)
 #endif
 
 #if defined(CONFIG_ETHER_ON_FCC) && (CONFIG_ETHER_INDEX == 3)
 #define CONFIG_ETHER_ON_FCC3
-#define CFG_CMXFCR_MASK3	(CMXFCR_FC3 | CMXFCR_RF3CS_MSK | \
+#define CONFIG_SYS_CMXFCR_MASK3	(CMXFCR_FC3 | CMXFCR_RF3CS_MSK | \
 				 CMXFCR_TF3CS_MSK)
-#define CFG_CMXFCR_VALUE3	(CMXFCR_RF3CS_CLK15 | CMXFCR_TF3CS_CLK14)
-#define CFG_CPMFCR_RAMTYPE	0
-#define CFG_FCC_PSMR		(FCC_PSMR_FDE | FCC_PSMR_LPB)
+#define CONFIG_SYS_CMXFCR_VALUE3	(CMXFCR_RF3CS_CLK15 | CMXFCR_TF3CS_CLK14)
+#define CONFIG_SYS_CPMFCR_RAMTYPE	0
+#define CONFIG_SYS_FCC_PSMR		(FCC_PSMR_FDE | FCC_PSMR_LPB)
 #endif
 
 /*
  * Environment
  */
-#define CFG_ENV_IS_IN_FLASH	1
+#define CONFIG_ENV_IS_IN_FLASH	1
 
 #ifdef CONFIG_TQM_FLASH_N_TYPE
-#define CFG_ENV_SECT_SIZE	0x40000 /* 256K (one sector) for env	*/
+#define CONFIG_ENV_SECT_SIZE	0x40000 /* 256K (one sector) for env	*/
 #else /* !CONFIG_TQM_FLASH_N_TYPE */
-#define CFG_ENV_SECT_SIZE	0x20000 /* 128K (one sector) for env	*/
+#define CONFIG_ENV_SECT_SIZE	0x20000 /* 128K (one sector) for env	*/
 #endif /* CONFIG_TQM_FLASH_N_TYPE */
-#define CFG_ENV_ADDR		(CFG_MONITOR_BASE - CFG_ENV_SECT_SIZE)
-#define CFG_ENV_SIZE		0x2000
-#define CFG_ENV_ADDR_REDUND	(CFG_ENV_ADDR - CFG_ENV_SECT_SIZE)
-#define CFG_ENV_SIZE_REDUND	(CFG_ENV_SIZE)
+#define CONFIG_ENV_ADDR		(CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
+#define CONFIG_ENV_SIZE		0x2000
+#define CONFIG_ENV_ADDR_REDUND	(CONFIG_ENV_ADDR - CONFIG_ENV_SECT_SIZE)
+#define CONFIG_ENV_SIZE_REDUND	(CONFIG_ENV_SIZE)
 
 #define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
-#define CFG_LOADS_BAUD_CHANGE	1	/* allow baudrate change	*/
+#define CONFIG_SYS_LOADS_BAUD_CHANGE	1	/* allow baudrate change	*/
 
 #define	CONFIG_TIMESTAMP	/* Print image info with ts	*/
 
@@ -627,28 +619,28 @@
 /*
  * Miscellaneous configurable options
  */
-#define CFG_LONGHELP			/* undef to save memory		*/
-#define CFG_LOAD_ADDR	0x2000000	/* default load address		*/
-#define CFG_PROMPT	"=> "		/* Monitor Command Prompt	*/
+#define CONFIG_SYS_LONGHELP			/* undef to save memory		*/
+#define CONFIG_SYS_LOAD_ADDR	0x2000000	/* default load address		*/
+#define CONFIG_SYS_PROMPT	"=> "		/* Monitor Command Prompt	*/
 
 #if defined(CONFIG_CMD_KGDB)
-#define CFG_CBSIZE	1024		/* Console I/O Buffer Size	*/
+#define CONFIG_SYS_CBSIZE	1024		/* Console I/O Buffer Size	*/
 #else
-#define CFG_CBSIZE	256		/* Console I/O Buffer Size	*/
+#define CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size	*/
 #endif
 
-#define CFG_PBSIZE	(CFG_CBSIZE + \
-			 sizeof(CFG_PROMPT) + 16)   /* Print Buf Size	*/
-#define CFG_MAXARGS	16		/* max number of command args	*/
-#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size	*/
-#define CFG_HZ		1000		/* decrementer freq: 1ms ticks	*/
+#define CONFIG_SYS_PBSIZE	(CONFIG_SYS_CBSIZE + \
+			 sizeof(CONFIG_SYS_PROMPT) + 16)   /* Print Buf Size	*/
+#define CONFIG_SYS_MAXARGS	16		/* max number of command args	*/
+#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
+#define CONFIG_SYS_HZ		1000		/* decrementer freq: 1ms ticks	*/
 
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define CFG_BOOTMAPSZ	(8 << 20)	/* Initial Memory map for Linux	*/
+#define CONFIG_SYS_BOOTMAPSZ	(8 << 20)	/* Initial Memory map for Linux	*/
 
 /*
  * Internal Definitions
@@ -678,20 +670,20 @@
  * Setup some board specific values for the default environment variables
  */
 #ifdef CONFIG_CPM2
-#define CFG_ENV_CONSDEV		"consdev=ttyCPM0\0"
+#define CONFIG_ENV_CONSDEV		"consdev=ttyCPM0\0"
 #else
-#define CFG_ENV_CONSDEV		"consdev=ttyS0\0"
+#define CONFIG_ENV_CONSDEV		"consdev=ttyS0\0"
 #endif
-#define CFG_ENV_FDT_FILE	"fdt_file="MK_STR(CONFIG_HOSTNAME)"/" \
+#define CONFIG_ENV_FDT_FILE	"fdt_file="MK_STR(CONFIG_HOSTNAME)"/" \
 				MK_STR(CONFIG_HOSTNAME)".dtb\0"
-#define CFG_ENV_BOOTFILE	"bootfile="MK_STR(CONFIG_HOSTNAME)"/uImage\0"
-#define CFG_ENV_UBOOT		"uboot="MK_STR(CONFIG_HOSTNAME)"/u-boot.bin\0" \
+#define CONFIG_ENV_BOOTFILE	"bootfile="MK_STR(CONFIG_HOSTNAME)"/uImage\0"
+#define CONFIG_ENV_UBOOT		"uboot="MK_STR(CONFIG_HOSTNAME)"/u-boot.bin\0" \
 				"uboot_addr="MK_STR(TEXT_BASE)"\0"
 
 #define	CONFIG_EXTRA_ENV_SETTINGS					\
-	CFG_ENV_BOOTFILE						\
-	CFG_ENV_FDT_FILE						\
-	CFG_ENV_CONSDEV							\
+	CONFIG_ENV_BOOTFILE						\
+	CONFIG_ENV_FDT_FILE						\
+	CONFIG_ENV_CONSDEV							\
 	"netdev=eth0\0"							\
 	"nfsargs=setenv bootargs root=/dev/nfs rw "			\
 		"nfsroot=$serverip:$rootpath\0"				\
@@ -715,7 +707,7 @@
 	"fdt_addr=ffec0000\0"						\
 	"kernel_addr=ffd00000\0"					\
 	"ramdisk_addr=ff800000\0"					\
-	CFG_ENV_UBOOT							\
+	CONFIG_ENV_UBOOT							\
 	"load=tftp 100000 $uboot\0"					\
 	"update=protect off $uboot_addr +$filesize;"			\
 		"erase $uboot_addr +$filesize;"				\
diff --git a/include/configs/TQM860L.h b/include/configs/TQM860L.h
index dacc3406b..b67cdcd89 100644
--- a/include/configs/TQM860L.h
+++ b/include/configs/TQM860L.h
@@ -83,7 +83,7 @@
 #define CONFIG_BOOTCOMMAND	"run flash_self"
 
 #define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
-#undef	CFG_LOADS_BAUD_CHANGE		/* don't allow baudrate change	*/
+#undef	CONFIG_SYS_LOADS_BAUD_CHANGE		/* don't allow baudrate change	*/
 
 #undef	CONFIG_WATCHDOG			/* watchdog disabled		*/
 
@@ -127,32 +127,32 @@
 /*
  * Miscellaneous configurable options
  */
-#define	CFG_LONGHELP			/* undef to save memory		*/
-#define	CFG_PROMPT		"=> "	/* Monitor Command Prompt	*/
+#define	CONFIG_SYS_LONGHELP			/* undef to save memory		*/
+#define	CONFIG_SYS_PROMPT		"=> "	/* Monitor Command Prompt	*/
 
 #define CONFIG_CMDLINE_EDITING	1	/* add command line history	*/
-#define CFG_HUSH_PARSER		1	/* Use the HUSH parser		*/
-#ifdef	CFG_HUSH_PARSER
-#define	CFG_PROMPT_HUSH_PS2	"> "
+#define CONFIG_SYS_HUSH_PARSER		1	/* Use the HUSH parser		*/
+#ifdef	CONFIG_SYS_HUSH_PARSER
+#define	CONFIG_SYS_PROMPT_HUSH_PS2	"> "
 #endif
 
 #if defined(CONFIG_CMD_KGDB)
-#define	CFG_CBSIZE		1024	/* Console I/O Buffer Size	*/
+#define	CONFIG_SYS_CBSIZE		1024	/* Console I/O Buffer Size	*/
 #else
-#define	CFG_CBSIZE		256	/* Console I/O Buffer Size	*/
+#define	CONFIG_SYS_CBSIZE		256	/* Console I/O Buffer Size	*/
 #endif
-#define	CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define	CFG_MAXARGS		16	/* max number of command args	*/
-#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+#define	CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define	CONFIG_SYS_MAXARGS		16	/* max number of command args	*/
+#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
 
-#define CFG_MEMTEST_START	0x0400000	/* memtest works on	*/
-#define CFG_MEMTEST_END		0x0C00000	/* 4 ... 12 MB in DRAM	*/
+#define CONFIG_SYS_MEMTEST_START	0x0400000	/* memtest works on	*/
+#define CONFIG_SYS_MEMTEST_END		0x0C00000	/* 4 ... 12 MB in DRAM	*/
 
-#define	CFG_LOAD_ADDR		0x100000	/* default load address	*/
+#define	CONFIG_SYS_LOAD_ADDR		0x100000	/* default load address	*/
 
-#define	CFG_HZ			1000	/* decrementer freq: 1 ms ticks	*/
+#define	CONFIG_SYS_HZ			1000	/* decrementer freq: 1 ms ticks	*/
 
-#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
 
 /*
  * Low Level Configuration Settings
@@ -162,57 +162,59 @@
 /*-----------------------------------------------------------------------
  * Internal Memory Mapped Register
  */
-#define CFG_IMMR		0xFFF00000
+#define CONFIG_SYS_IMMR		0xFFF00000
 
 /*-----------------------------------------------------------------------
  * Definitions for initial stack pointer and data area (in DPRAM)
  */
-#define CFG_INIT_RAM_ADDR	CFG_IMMR
-#define	CFG_INIT_RAM_END	0x2F00	/* End of used area in DPRAM	*/
-#define	CFG_GBL_DATA_SIZE	64  /* size in bytes reserved for initial data */
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define	CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_IMMR
+#define	CONFIG_SYS_INIT_RAM_END	0x2F00	/* End of used area in DPRAM	*/
+#define	CONFIG_SYS_GBL_DATA_SIZE	64  /* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define	CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
 /*-----------------------------------------------------------------------
  * Start addresses for the final memory configuration
  * (Set up by the startup code)
- * Please note that CFG_SDRAM_BASE _must_ start at 0
+ * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
  */
-#define	CFG_SDRAM_BASE		0x00000000
-#define CFG_FLASH_BASE		0x40000000
-#define	CFG_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor	*/
-#define CFG_MONITOR_BASE	CFG_FLASH_BASE
-#define	CFG_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/
+#define	CONFIG_SYS_SDRAM_BASE		0x00000000
+#define CONFIG_SYS_FLASH_BASE		0x40000000
+#define	CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor	*/
+#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_FLASH_BASE
+#define	CONFIG_SYS_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/
 
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define	CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux	*/
+#define	CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux	*/
 
 /*-----------------------------------------------------------------------
  * FLASH organization
  */
 
 /* use CFI flash driver */
-#define CFG_FLASH_CFI		1	/* Flash is CFI conformant */
+#define CONFIG_SYS_FLASH_CFI		1	/* Flash is CFI conformant */
 #define CONFIG_FLASH_CFI_DRIVER	1	/* Use the common driver */
-#define CFG_FLASH_BANKS_LIST	{ CFG_FLASH_BASE, CFG_FLASH_BASE+flash_info[0].size }
-#define CFG_FLASH_EMPTY_INFO
-#define CFG_FLASH_USE_BUFFER_WRITE	1
-#define CFG_MAX_FLASH_BANKS	2	/* max number of memory banks */
-#define CFG_MAX_FLASH_SECT	71	/* max number of sectors on one chip */
+#define CONFIG_SYS_FLASH_BANKS_LIST	{ CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE+flash_info[0].size }
+#define CONFIG_SYS_FLASH_EMPTY_INFO
+#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE	1
+#define CONFIG_SYS_MAX_FLASH_BANKS	2	/* max number of memory banks */
+#define CONFIG_SYS_MAX_FLASH_SECT	71	/* max number of sectors on one chip */
 
-#define	CFG_ENV_IS_IN_FLASH	1
-#define	CFG_ENV_OFFSET		0x8000	/*   Offset   of Environment Sector	*/
-#define	CFG_ENV_SIZE		0x4000	/* Total Size of Environment Sector	*/
+#define	CONFIG_ENV_IS_IN_FLASH	1
+#define	CONFIG_ENV_OFFSET		0x8000	/*   Offset   of Environment Sector	*/
+#define	CONFIG_ENV_SIZE		0x4000	/* Total Size of Environment Sector	*/
 
 /* Address and size of Redundant Environment Sector	*/
-#define CFG_ENV_OFFSET_REDUND	(CFG_ENV_OFFSET+CFG_ENV_SIZE)
-#define CFG_ENV_SIZE_REDUND	(CFG_ENV_SIZE)
+#define CONFIG_ENV_OFFSET_REDUND	(CONFIG_ENV_OFFSET+CONFIG_ENV_SIZE)
+#define CONFIG_ENV_SIZE_REDUND	(CONFIG_ENV_SIZE)
 
-#define	CFG_USE_PPCENV			/* Environment embedded in sect .ppcenv */
+#define	CONFIG_SYS_USE_PPCENV			/* Environment embedded in sect .ppcenv */
+
+#define CONFIG_MISC_INIT_R		/* Make sure to remap flashes correctly */
 
 /*-----------------------------------------------------------------------
  * Dynamic MTD partition support
@@ -229,16 +231,16 @@
 /*-----------------------------------------------------------------------
  * Hardware Information Block
  */
-#define CFG_HWINFO_OFFSET	0x0003FFC0	/* offset of HW Info block */
-#define CFG_HWINFO_SIZE		0x00000040	/* size   of HW Info block */
-#define CFG_HWINFO_MAGIC	0x54514D38	/* 'TQM8' */
+#define CONFIG_SYS_HWINFO_OFFSET	0x0003FFC0	/* offset of HW Info block */
+#define CONFIG_SYS_HWINFO_SIZE		0x00000040	/* size   of HW Info block */
+#define CONFIG_SYS_HWINFO_MAGIC	0x54514D38	/* 'TQM8' */
 
 /*-----------------------------------------------------------------------
  * Cache Configuration
  */
-#define CFG_CACHELINE_SIZE	16	/* For all MPC8xx CPUs			*/
+#define CONFIG_SYS_CACHELINE_SIZE	16	/* For all MPC8xx CPUs			*/
 #if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT	4	/* log base 2 of the above value	*/
+#define CONFIG_SYS_CACHELINE_SHIFT	4	/* log base 2 of the above value	*/
 #endif
 
 /*-----------------------------------------------------------------------
@@ -248,10 +250,10 @@
  * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze
  */
 #if defined(CONFIG_WATCHDOG)
-#define CFG_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
+#define CONFIG_SYS_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
 			 SYPCR_SWE  | SYPCR_SWRI| SYPCR_SWP)
 #else
-#define CFG_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
+#define CONFIG_SYS_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
 #endif
 
 /*-----------------------------------------------------------------------
@@ -260,9 +262,9 @@
  * PCMCIA config., multi-function pin tri-state
  */
 #ifndef	CONFIG_CAN_DRIVER
-#define CFG_SIUMCR	(SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_MLRC01)
+#define CONFIG_SYS_SIUMCR	(SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_MLRC01)
 #else	/* we must activate GPL5 in the SIUMCR for CAN */
-#define CFG_SIUMCR	(SIUMCR_DBGC11 | SIUMCR_DBPC00 | SIUMCR_MLRC01)
+#define CONFIG_SYS_SIUMCR	(SIUMCR_DBGC11 | SIUMCR_DBPC00 | SIUMCR_MLRC01)
 #endif	/* CONFIG_CAN_DRIVER */
 
 /*-----------------------------------------------------------------------
@@ -270,20 +272,20 @@
  *-----------------------------------------------------------------------
  * Clear Reference Interrupt Status, Timebase freezing enabled
  */
-#define CFG_TBSCR	(TBSCR_REFA | TBSCR_REFB | TBSCR_TBF)
+#define CONFIG_SYS_TBSCR	(TBSCR_REFA | TBSCR_REFB | TBSCR_TBF)
 
 /*-----------------------------------------------------------------------
  * RTCSC - Real-Time Clock Status and Control Register		11-27
  *-----------------------------------------------------------------------
  */
-#define CFG_RTCSC	(RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE)
+#define CONFIG_SYS_RTCSC	(RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE)
 
 /*-----------------------------------------------------------------------
  * PISCR - Periodic Interrupt Status and Control		11-31
  *-----------------------------------------------------------------------
  * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
  */
-#define CFG_PISCR	(PISCR_PS | PISCR_PITF)
+#define CONFIG_SYS_PISCR	(PISCR_PS | PISCR_PITF)
 
 /*-----------------------------------------------------------------------
  * PLPRCR - PLL, Low-Power, and Reset Control Register		15-30
@@ -291,7 +293,7 @@
  * Reset PLL lock status sticky bit, timer expired status bit and timer
  * interrupt status bit
  */
-#define CFG_PLPRCR	(PLPRCR_SPLSS | PLPRCR_TEXPS | PLPRCR_TMIST)
+#define CONFIG_SYS_PLPRCR	(PLPRCR_SPLSS | PLPRCR_TEXPS | PLPRCR_TMIST)
 
 /*-----------------------------------------------------------------------
  * SCCR - System Clock and reset Control Register		15-27
@@ -300,7 +302,7 @@
  * power management and some other internal clocks
  */
 #define SCCR_MASK	SCCR_EBDF11
-#define CFG_SCCR	(SCCR_COM00   | SCCR_DFSYNC00 | SCCR_DFBRG00  | \
+#define CONFIG_SYS_SCCR	(SCCR_COM00   | SCCR_DFSYNC00 | SCCR_DFBRG00  | \
 			 SCCR_DFNL000 | SCCR_DFNH000  | SCCR_DFLCD000 | \
 			 SCCR_DFALCD00)
 
@@ -309,14 +311,14 @@
  *-----------------------------------------------------------------------
  *
  */
-#define CFG_PCMCIA_MEM_ADDR	(0xE0000000)
-#define CFG_PCMCIA_MEM_SIZE	( 64 << 20 )
-#define CFG_PCMCIA_DMA_ADDR	(0xE4000000)
-#define CFG_PCMCIA_DMA_SIZE	( 64 << 20 )
-#define CFG_PCMCIA_ATTRB_ADDR	(0xE8000000)
-#define CFG_PCMCIA_ATTRB_SIZE	( 64 << 20 )
-#define CFG_PCMCIA_IO_ADDR	(0xEC000000)
-#define CFG_PCMCIA_IO_SIZE	( 64 << 20 )
+#define CONFIG_SYS_PCMCIA_MEM_ADDR	(0xE0000000)
+#define CONFIG_SYS_PCMCIA_MEM_SIZE	( 64 << 20 )
+#define CONFIG_SYS_PCMCIA_DMA_ADDR	(0xE4000000)
+#define CONFIG_SYS_PCMCIA_DMA_SIZE	( 64 << 20 )
+#define CONFIG_SYS_PCMCIA_ATTRB_ADDR	(0xE8000000)
+#define CONFIG_SYS_PCMCIA_ATTRB_SIZE	( 64 << 20 )
+#define CONFIG_SYS_PCMCIA_IO_ADDR	(0xEC000000)
+#define CONFIG_SYS_PCMCIA_IO_SIZE	( 64 << 20 )
 
 /*-----------------------------------------------------------------------
  * IDE/ATA stuff (Supports IDE harddisk on PCMCIA Adapter)
@@ -329,28 +331,28 @@
 #undef	CONFIG_IDE_LED			/* LED   for ide not supported	*/
 #undef	CONFIG_IDE_RESET		/* reset for ide not supported	*/
 
-#define CFG_IDE_MAXBUS		1	/* max. 1 IDE bus		*/
-#define CFG_IDE_MAXDEVICE	1	/* max. 1 drive per IDE bus	*/
+#define CONFIG_SYS_IDE_MAXBUS		1	/* max. 1 IDE bus		*/
+#define CONFIG_SYS_IDE_MAXDEVICE	1	/* max. 1 drive per IDE bus	*/
 
-#define CFG_ATA_IDE0_OFFSET	0x0000
+#define CONFIG_SYS_ATA_IDE0_OFFSET	0x0000
 
-#define CFG_ATA_BASE_ADDR	CFG_PCMCIA_MEM_ADDR
+#define CONFIG_SYS_ATA_BASE_ADDR	CONFIG_SYS_PCMCIA_MEM_ADDR
 
 /* Offset for data I/O			*/
-#define CFG_ATA_DATA_OFFSET	(CFG_PCMCIA_MEM_SIZE + 0x320)
+#define CONFIG_SYS_ATA_DATA_OFFSET	(CONFIG_SYS_PCMCIA_MEM_SIZE + 0x320)
 
 /* Offset for normal register accesses	*/
-#define CFG_ATA_REG_OFFSET	(2 * CFG_PCMCIA_MEM_SIZE + 0x320)
+#define CONFIG_SYS_ATA_REG_OFFSET	(2 * CONFIG_SYS_PCMCIA_MEM_SIZE + 0x320)
 
 /* Offset for alternate registers	*/
-#define CFG_ATA_ALT_OFFSET	0x0100
+#define CONFIG_SYS_ATA_ALT_OFFSET	0x0100
 
 /*-----------------------------------------------------------------------
  *
  *-----------------------------------------------------------------------
  *
  */
-#define CFG_DER	0
+#define CONFIG_SYS_DER	0
 
 /*
  * Init Memory Controller:
@@ -365,22 +367,22 @@
  * restrict access enough to keep SRAM working (if any)
  * but not too much to meddle with FLASH accesses
  */
-#define CFG_REMAP_OR_AM		0x80000000	/* OR addr mask */
-#define CFG_PRELIM_OR_AM	0xE0000000	/* OR addr mask */
+#define CONFIG_SYS_REMAP_OR_AM		0x80000000	/* OR addr mask */
+#define CONFIG_SYS_PRELIM_OR_AM	0xE0000000	/* OR addr mask */
 
 /*
  * FLASH timing:
  */
-#define CFG_OR_TIMING_FLASH	(OR_ACS_DIV1  | OR_TRLX | OR_CSNT_SAM | \
+#define CONFIG_SYS_OR_TIMING_FLASH	(OR_ACS_DIV1  | OR_TRLX | OR_CSNT_SAM | \
 				 OR_SCY_3_CLK | OR_EHTR | OR_BI)
 
-#define CFG_OR0_REMAP	(CFG_REMAP_OR_AM  | CFG_OR_TIMING_FLASH)
-#define CFG_OR0_PRELIM	(CFG_PRELIM_OR_AM | CFG_OR_TIMING_FLASH)
-#define CFG_BR0_PRELIM	((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_V )
+#define CONFIG_SYS_OR0_REMAP	(CONFIG_SYS_REMAP_OR_AM  | CONFIG_SYS_OR_TIMING_FLASH)
+#define CONFIG_SYS_OR0_PRELIM	(CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_FLASH)
+#define CONFIG_SYS_BR0_PRELIM	((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_V )
 
-#define CFG_OR1_REMAP	CFG_OR0_REMAP
-#define CFG_OR1_PRELIM	CFG_OR0_PRELIM
-#define CFG_BR1_PRELIM	((FLASH_BASE1_PRELIM & BR_BA_MSK) | BR_V )
+#define CONFIG_SYS_OR1_REMAP	CONFIG_SYS_OR0_REMAP
+#define CONFIG_SYS_OR1_PRELIM	CONFIG_SYS_OR0_PRELIM
+#define CONFIG_SYS_BR1_PRELIM	((FLASH_BASE1_PRELIM & BR_BA_MSK) | BR_V )
 
 /*
  * BR2/3 and OR2/3 (SDRAM)
@@ -391,19 +393,19 @@
 #define	SDRAM_MAX_SIZE		0x04000000	/* max 64 MB per bank	*/
 
 /* SDRAM timing: Multiplexed addresses, GPL5 output to GPL5_A (don't care)	*/
-#define CFG_OR_TIMING_SDRAM	0x00000A00
+#define CONFIG_SYS_OR_TIMING_SDRAM	0x00000A00
 
-#define CFG_OR2_PRELIM	(CFG_PRELIM_OR_AM | CFG_OR_TIMING_SDRAM )
-#define CFG_BR2_PRELIM	((SDRAM_BASE2_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
+#define CONFIG_SYS_OR2_PRELIM	(CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_SDRAM )
+#define CONFIG_SYS_BR2_PRELIM	((SDRAM_BASE2_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
 
 #ifndef	CONFIG_CAN_DRIVER
-#define	CFG_OR3_PRELIM	CFG_OR2_PRELIM
-#define CFG_BR3_PRELIM	((SDRAM_BASE3_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
+#define	CONFIG_SYS_OR3_PRELIM	CONFIG_SYS_OR2_PRELIM
+#define CONFIG_SYS_BR3_PRELIM	((SDRAM_BASE3_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
 #else	/* CAN uses CS3#, so we can have only one SDRAM bank anyway */
-#define	CFG_CAN_BASE		0xC0000000	/* CAN mapped at 0xC0000000	*/
-#define CFG_CAN_OR_AM		0xFFFF8000	/* 32 kB address mask		*/
-#define CFG_OR3_CAN		(CFG_CAN_OR_AM | OR_G5LA | OR_BI)
-#define CFG_BR3_CAN		((CFG_CAN_BASE & BR_BA_MSK) | \
+#define	CONFIG_SYS_CAN_BASE		0xC0000000	/* CAN mapped at 0xC0000000	*/
+#define CONFIG_SYS_CAN_OR_AM		0xFFFF8000	/* 32 kB address mask		*/
+#define CONFIG_SYS_OR3_CAN		(CONFIG_SYS_CAN_OR_AM | OR_G5LA | OR_BI)
+#define CONFIG_SYS_BR3_CAN		((CONFIG_SYS_CAN_BASE & BR_BA_MSK) | \
 					BR_PS_8 | BR_MS_UPMB | BR_V )
 #endif	/* CONFIG_CAN_DRIVER */
 
@@ -434,34 +436,34 @@
  * 80 Mhz => 80.000.000 / Divider = 156
  */
 
-#define CFG_PTA_PER_CLK	((4096 * 32 * 1000) / (4 * 64))
-#define CFG_MAMR_PTA	98
+#define CONFIG_SYS_PTA_PER_CLK	((4096 * 32 * 1000) / (4 * 64))
+#define CONFIG_SYS_MAMR_PTA	98
 
 /*
  * For 16 MBit, refresh rates could be 31.3 us
  * (= 64 ms / 2K = 125 / quad bursts).
  * For a simpler initialization, 15.6 us is used instead.
  *
- * #define CFG_MPTPR_2BK_2K	MPTPR_PTP_DIV32		for 2 banks
- * #define CFG_MPTPR_1BK_2K	MPTPR_PTP_DIV64		for 1 bank
+ * #define CONFIG_SYS_MPTPR_2BK_2K	MPTPR_PTP_DIV32		for 2 banks
+ * #define CONFIG_SYS_MPTPR_1BK_2K	MPTPR_PTP_DIV64		for 1 bank
  */
-#define CFG_MPTPR_2BK_4K	MPTPR_PTP_DIV16		/* setting for 2 banks	*/
-#define CFG_MPTPR_1BK_4K	MPTPR_PTP_DIV32		/* setting for 1 bank	*/
+#define CONFIG_SYS_MPTPR_2BK_4K	MPTPR_PTP_DIV16		/* setting for 2 banks	*/
+#define CONFIG_SYS_MPTPR_1BK_4K	MPTPR_PTP_DIV32		/* setting for 1 bank	*/
 
 /* refresh rate 7.8 us (= 64 ms / 8K = 31.2 / quad bursts) for 256 MBit		*/
-#define CFG_MPTPR_2BK_8K	MPTPR_PTP_DIV8		/* setting for 2 banks	*/
-#define CFG_MPTPR_1BK_8K	MPTPR_PTP_DIV16		/* setting for 1 bank	*/
+#define CONFIG_SYS_MPTPR_2BK_8K	MPTPR_PTP_DIV8		/* setting for 2 banks	*/
+#define CONFIG_SYS_MPTPR_1BK_8K	MPTPR_PTP_DIV16		/* setting for 1 bank	*/
 
 /*
  * MAMR settings for SDRAM
  */
 
 /* 8 column SDRAM */
-#define CFG_MAMR_8COL	((CFG_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
+#define CONFIG_SYS_MAMR_8COL	((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
 			 MAMR_AMA_TYPE_0 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A11 |	\
 			 MAMR_RLFA_1X	 | MAMR_WLFA_1X	   | MAMR_TLFA_4X)
 /* 9 column SDRAM */
-#define CFG_MAMR_9COL	((CFG_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
+#define CONFIG_SYS_MAMR_9COL	((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
 			 MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 |	\
 			 MAMR_RLFA_1X	 | MAMR_WLFA_1X	   | MAMR_TLFA_4X)
 
diff --git a/include/configs/TQM860M.h b/include/configs/TQM860M.h
index 3ec849c8b..46852dd11 100644
--- a/include/configs/TQM860M.h
+++ b/include/configs/TQM860M.h
@@ -1,5 +1,5 @@
 /*
- * (C) Copyright 2000-2005
+ * (C) Copyright 2000-2008
  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
  *
  * See file CREDITS for list of people who contributed to this
@@ -83,7 +83,7 @@
 #define CONFIG_BOOTCOMMAND	"run flash_self"
 
 #define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
-#undef	CFG_LOADS_BAUD_CHANGE		/* don't allow baudrate change	*/
+#undef	CONFIG_SYS_LOADS_BAUD_CHANGE		/* don't allow baudrate change	*/
 
 #undef	CONFIG_WATCHDOG			/* watchdog disabled		*/
 
@@ -128,32 +128,32 @@
 /*
  * Miscellaneous configurable options
  */
-#define	CFG_LONGHELP			/* undef to save memory		*/
-#define	CFG_PROMPT		"=> "	/* Monitor Command Prompt	*/
+#define	CONFIG_SYS_LONGHELP			/* undef to save memory		*/
+#define	CONFIG_SYS_PROMPT		"=> "	/* Monitor Command Prompt	*/
 
 #define CONFIG_CMDLINE_EDITING	1	/* add command line history	*/
-#define CFG_HUSH_PARSER		1	/* Use the HUSH parser		*/
-#ifdef	CFG_HUSH_PARSER
-#define	CFG_PROMPT_HUSH_PS2	"> "
+#define CONFIG_SYS_HUSH_PARSER		1	/* Use the HUSH parser		*/
+#ifdef	CONFIG_SYS_HUSH_PARSER
+#define	CONFIG_SYS_PROMPT_HUSH_PS2	"> "
 #endif
 
 #if defined(CONFIG_CMD_KGDB)
-#define	CFG_CBSIZE		1024	/* Console I/O Buffer Size	*/
+#define	CONFIG_SYS_CBSIZE		1024	/* Console I/O Buffer Size	*/
 #else
-#define	CFG_CBSIZE		256	/* Console I/O Buffer Size	*/
+#define	CONFIG_SYS_CBSIZE		256	/* Console I/O Buffer Size	*/
 #endif
-#define	CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define	CFG_MAXARGS		16	/* max number of command args	*/
-#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+#define	CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define	CONFIG_SYS_MAXARGS		16	/* max number of command args	*/
+#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
 
-#define CFG_MEMTEST_START	0x0400000	/* memtest works on	*/
-#define CFG_MEMTEST_END		0x0C00000	/* 4 ... 12 MB in DRAM	*/
+#define CONFIG_SYS_MEMTEST_START	0x0400000	/* memtest works on	*/
+#define CONFIG_SYS_MEMTEST_END		0x0C00000	/* 4 ... 12 MB in DRAM	*/
 
-#define	CFG_LOAD_ADDR		0x100000	/* default load address	*/
+#define	CONFIG_SYS_LOAD_ADDR		0x100000	/* default load address	*/
 
-#define	CFG_HZ			1000	/* decrementer freq: 1 ms ticks	*/
+#define	CONFIG_SYS_HZ			1000	/* decrementer freq: 1 ms ticks	*/
 
-#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
 
 /*
  * Low Level Configuration Settings
@@ -163,57 +163,59 @@
 /*-----------------------------------------------------------------------
  * Internal Memory Mapped Register
  */
-#define CFG_IMMR		0xFFF00000
+#define CONFIG_SYS_IMMR		0xFFF00000
 
 /*-----------------------------------------------------------------------
  * Definitions for initial stack pointer and data area (in DPRAM)
  */
-#define CFG_INIT_RAM_ADDR	CFG_IMMR
-#define	CFG_INIT_RAM_END	0x2F00	/* End of used area in DPRAM	*/
-#define	CFG_GBL_DATA_SIZE	64  /* size in bytes reserved for initial data */
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define	CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_IMMR
+#define	CONFIG_SYS_INIT_RAM_END	0x2F00	/* End of used area in DPRAM	*/
+#define	CONFIG_SYS_GBL_DATA_SIZE	64  /* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define	CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
 /*-----------------------------------------------------------------------
  * Start addresses for the final memory configuration
  * (Set up by the startup code)
- * Please note that CFG_SDRAM_BASE _must_ start at 0
+ * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
  */
-#define	CFG_SDRAM_BASE		0x00000000
-#define CFG_FLASH_BASE		0x40000000
-#define	CFG_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor	*/
-#define CFG_MONITOR_BASE	CFG_FLASH_BASE
-#define	CFG_MALLOC_LEN		(256 << 10)	/* Reserve 256 kB for malloc()	*/
+#define	CONFIG_SYS_SDRAM_BASE		0x00000000
+#define CONFIG_SYS_FLASH_BASE		0x40000000
+#define	CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor	*/
+#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_FLASH_BASE
+#define	CONFIG_SYS_MALLOC_LEN		(256 << 10)	/* Reserve 256 kB for malloc()	*/
 
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define	CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux	*/
+#define	CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux	*/
 
 /*-----------------------------------------------------------------------
  * FLASH organization
  */
 /* use CFI flash driver */
-#define CFG_FLASH_CFI		1	/* Flash is CFI conformant */
+#define CONFIG_SYS_FLASH_CFI		1	/* Flash is CFI conformant */
 #define CONFIG_FLASH_CFI_DRIVER	1	/* Use the common driver */
-#define CFG_FLASH_BANKS_LIST	{ CFG_FLASH_BASE }
-#define CFG_FLASH_EMPTY_INFO
-#define CFG_FLASH_USE_BUFFER_WRITE	1
-#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks */
-#define CFG_MAX_FLASH_SECT	256	/* max number of sectors on one chip */
+#define CONFIG_SYS_FLASH_BANKS_LIST	{ CONFIG_SYS_FLASH_BASE }
+#define CONFIG_SYS_FLASH_EMPTY_INFO
+#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE	1
+#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks */
+#define CONFIG_SYS_MAX_FLASH_SECT	256	/* max number of sectors on one chip */
 
-#define	CFG_ENV_IS_IN_FLASH	1
-#define	CFG_ENV_OFFSET		0x40000	/*   Offset   of Environment Sector	*/
-#define	CFG_ENV_SIZE		0x08000	/* Total Size of Environment Sector	*/
-#define	CFG_ENV_SECT_SIZE	0x40000	/* Total Size of Environment Sector	*/
+#define	CONFIG_ENV_IS_IN_FLASH	1
+#define	CONFIG_ENV_OFFSET		0x40000	/*   Offset   of Environment Sector	*/
+#define	CONFIG_ENV_SIZE		0x08000	/* Total Size of Environment Sector	*/
+#define	CONFIG_ENV_SECT_SIZE	0x40000	/* Total Size of Environment Sector	*/
 
 /* Address and size of Redundant Environment Sector	*/
-#define CFG_ENV_OFFSET_REDUND	(CFG_ENV_OFFSET+CFG_ENV_SECT_SIZE)
-#define CFG_ENV_SIZE_REDUND	(CFG_ENV_SIZE)
+#define CONFIG_ENV_OFFSET_REDUND	(CONFIG_ENV_OFFSET+CONFIG_ENV_SECT_SIZE)
+#define CONFIG_ENV_SIZE_REDUND	(CONFIG_ENV_SIZE)
 
-#define	CFG_USE_PPCENV			/* Environment embedded in sect .ppcenv */
+#define	CONFIG_SYS_USE_PPCENV			/* Environment embedded in sect .ppcenv */
+
+#define CONFIG_MISC_INIT_R		/* Make sure to remap flashes correctly */
 
 /*-----------------------------------------------------------------------
  * Dynamic MTD partition support
@@ -230,16 +232,16 @@
 /*-----------------------------------------------------------------------
  * Hardware Information Block
  */
-#define CFG_HWINFO_OFFSET	0x0003FFC0	/* offset of HW Info block */
-#define CFG_HWINFO_SIZE		0x00000040	/* size   of HW Info block */
-#define CFG_HWINFO_MAGIC	0x54514D38	/* 'TQM8' */
+#define CONFIG_SYS_HWINFO_OFFSET	0x0003FFC0	/* offset of HW Info block */
+#define CONFIG_SYS_HWINFO_SIZE		0x00000040	/* size   of HW Info block */
+#define CONFIG_SYS_HWINFO_MAGIC	0x54514D38	/* 'TQM8' */
 
 /*-----------------------------------------------------------------------
  * Cache Configuration
  */
-#define CFG_CACHELINE_SIZE	16	/* For all MPC8xx CPUs			*/
+#define CONFIG_SYS_CACHELINE_SIZE	16	/* For all MPC8xx CPUs			*/
 #if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT	4	/* log base 2 of the above value	*/
+#define CONFIG_SYS_CACHELINE_SHIFT	4	/* log base 2 of the above value	*/
 #endif
 
 /*-----------------------------------------------------------------------
@@ -249,10 +251,10 @@
  * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze
  */
 #if defined(CONFIG_WATCHDOG)
-#define CFG_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
+#define CONFIG_SYS_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
 			 SYPCR_SWE  | SYPCR_SWRI| SYPCR_SWP)
 #else
-#define CFG_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
+#define CONFIG_SYS_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
 #endif
 
 /*-----------------------------------------------------------------------
@@ -261,9 +263,9 @@
  * PCMCIA config., multi-function pin tri-state
  */
 #ifndef	CONFIG_CAN_DRIVER
-#define CFG_SIUMCR	(SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_MLRC01)
+#define CONFIG_SYS_SIUMCR	(SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_MLRC01)
 #else	/* we must activate GPL5 in the SIUMCR for CAN */
-#define CFG_SIUMCR	(SIUMCR_DBGC11 | SIUMCR_DBPC00 | SIUMCR_MLRC01)
+#define CONFIG_SYS_SIUMCR	(SIUMCR_DBGC11 | SIUMCR_DBPC00 | SIUMCR_MLRC01)
 #endif	/* CONFIG_CAN_DRIVER */
 
 /*-----------------------------------------------------------------------
@@ -271,20 +273,20 @@
  *-----------------------------------------------------------------------
  * Clear Reference Interrupt Status, Timebase freezing enabled
  */
-#define CFG_TBSCR	(TBSCR_REFA | TBSCR_REFB | TBSCR_TBF)
+#define CONFIG_SYS_TBSCR	(TBSCR_REFA | TBSCR_REFB | TBSCR_TBF)
 
 /*-----------------------------------------------------------------------
  * RTCSC - Real-Time Clock Status and Control Register		11-27
  *-----------------------------------------------------------------------
  */
-#define CFG_RTCSC	(RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE)
+#define CONFIG_SYS_RTCSC	(RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE)
 
 /*-----------------------------------------------------------------------
  * PISCR - Periodic Interrupt Status and Control		11-31
  *-----------------------------------------------------------------------
  * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
  */
-#define CFG_PISCR	(PISCR_PS | PISCR_PITF)
+#define CONFIG_SYS_PISCR	(PISCR_PS | PISCR_PITF)
 
 /*-----------------------------------------------------------------------
  * PLPRCR - PLL, Low-Power, and Reset Control Register		15-30
@@ -292,7 +294,7 @@
  * Reset PLL lock status sticky bit, timer expired status bit and timer
  * interrupt status bit
  */
-#define CFG_PLPRCR	(PLPRCR_SPLSS | PLPRCR_TEXPS | PLPRCR_TMIST)
+#define CONFIG_SYS_PLPRCR	(PLPRCR_SPLSS | PLPRCR_TEXPS | PLPRCR_TMIST)
 
 /*-----------------------------------------------------------------------
  * SCCR - System Clock and reset Control Register		15-27
@@ -301,7 +303,7 @@
  * power management and some other internal clocks
  */
 #define SCCR_MASK	SCCR_EBDF11
-#define CFG_SCCR	(SCCR_COM00   | SCCR_DFSYNC00 | SCCR_DFBRG00  | \
+#define CONFIG_SYS_SCCR	(SCCR_COM00   | SCCR_DFSYNC00 | SCCR_DFBRG00  | \
 			 SCCR_DFNL000 | SCCR_DFNH000  | SCCR_DFLCD000 | \
 			 SCCR_DFALCD00)
 
@@ -310,14 +312,14 @@
  *-----------------------------------------------------------------------
  *
  */
-#define CFG_PCMCIA_MEM_ADDR	(0xE0000000)
-#define CFG_PCMCIA_MEM_SIZE	( 64 << 20 )
-#define CFG_PCMCIA_DMA_ADDR	(0xE4000000)
-#define CFG_PCMCIA_DMA_SIZE	( 64 << 20 )
-#define CFG_PCMCIA_ATTRB_ADDR	(0xE8000000)
-#define CFG_PCMCIA_ATTRB_SIZE	( 64 << 20 )
-#define CFG_PCMCIA_IO_ADDR	(0xEC000000)
-#define CFG_PCMCIA_IO_SIZE	( 64 << 20 )
+#define CONFIG_SYS_PCMCIA_MEM_ADDR	(0xE0000000)
+#define CONFIG_SYS_PCMCIA_MEM_SIZE	( 64 << 20 )
+#define CONFIG_SYS_PCMCIA_DMA_ADDR	(0xE4000000)
+#define CONFIG_SYS_PCMCIA_DMA_SIZE	( 64 << 20 )
+#define CONFIG_SYS_PCMCIA_ATTRB_ADDR	(0xE8000000)
+#define CONFIG_SYS_PCMCIA_ATTRB_SIZE	( 64 << 20 )
+#define CONFIG_SYS_PCMCIA_IO_ADDR	(0xEC000000)
+#define CONFIG_SYS_PCMCIA_IO_SIZE	( 64 << 20 )
 
 /*-----------------------------------------------------------------------
  * IDE/ATA stuff (Supports IDE harddisk on PCMCIA Adapter)
@@ -330,28 +332,28 @@
 #undef	CONFIG_IDE_LED			/* LED   for ide not supported	*/
 #undef	CONFIG_IDE_RESET		/* reset for ide not supported	*/
 
-#define CFG_IDE_MAXBUS		1	/* max. 1 IDE bus		*/
-#define CFG_IDE_MAXDEVICE	1	/* max. 1 drive per IDE bus	*/
+#define CONFIG_SYS_IDE_MAXBUS		1	/* max. 1 IDE bus		*/
+#define CONFIG_SYS_IDE_MAXDEVICE	1	/* max. 1 drive per IDE bus	*/
 
-#define CFG_ATA_IDE0_OFFSET	0x0000
+#define CONFIG_SYS_ATA_IDE0_OFFSET	0x0000
 
-#define CFG_ATA_BASE_ADDR	CFG_PCMCIA_MEM_ADDR
+#define CONFIG_SYS_ATA_BASE_ADDR	CONFIG_SYS_PCMCIA_MEM_ADDR
 
 /* Offset for data I/O			*/
-#define CFG_ATA_DATA_OFFSET	(CFG_PCMCIA_MEM_SIZE + 0x320)
+#define CONFIG_SYS_ATA_DATA_OFFSET	(CONFIG_SYS_PCMCIA_MEM_SIZE + 0x320)
 
 /* Offset for normal register accesses	*/
-#define CFG_ATA_REG_OFFSET	(2 * CFG_PCMCIA_MEM_SIZE + 0x320)
+#define CONFIG_SYS_ATA_REG_OFFSET	(2 * CONFIG_SYS_PCMCIA_MEM_SIZE + 0x320)
 
 /* Offset for alternate registers	*/
-#define CFG_ATA_ALT_OFFSET	0x0100
+#define CONFIG_SYS_ATA_ALT_OFFSET	0x0100
 
 /*-----------------------------------------------------------------------
  *
  *-----------------------------------------------------------------------
  *
  */
-#define CFG_DER	0
+#define CONFIG_SYS_DER	0
 
 /*
  * Init Memory Controller:
@@ -366,22 +368,22 @@
  * restrict access enough to keep SRAM working (if any)
  * but not too much to meddle with FLASH accesses
  */
-#define CFG_REMAP_OR_AM		0x80000000	/* OR addr mask */
-#define CFG_PRELIM_OR_AM	0xE0000000	/* OR addr mask */
+#define CONFIG_SYS_REMAP_OR_AM		0x80000000	/* OR addr mask */
+#define CONFIG_SYS_PRELIM_OR_AM	0xE0000000	/* OR addr mask */
 
 /*
  * FLASH timing:
  */
-#define CFG_OR_TIMING_FLASH	(OR_ACS_DIV1  | OR_TRLX | OR_CSNT_SAM | \
+#define CONFIG_SYS_OR_TIMING_FLASH	(OR_ACS_DIV1  | OR_TRLX | OR_CSNT_SAM | \
 				 OR_SCY_3_CLK | OR_EHTR | OR_BI)
 
-#define CFG_OR0_REMAP	(CFG_REMAP_OR_AM  | CFG_OR_TIMING_FLASH)
-#define CFG_OR0_PRELIM	(CFG_PRELIM_OR_AM | CFG_OR_TIMING_FLASH)
-#define CFG_BR0_PRELIM	((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_V )
+#define CONFIG_SYS_OR0_REMAP	(CONFIG_SYS_REMAP_OR_AM  | CONFIG_SYS_OR_TIMING_FLASH)
+#define CONFIG_SYS_OR0_PRELIM	(CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_FLASH)
+#define CONFIG_SYS_BR0_PRELIM	((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_V )
 
-#define CFG_OR1_REMAP	CFG_OR0_REMAP
-#define CFG_OR1_PRELIM	CFG_OR0_PRELIM
-#define CFG_BR1_PRELIM	((FLASH_BASE1_PRELIM & BR_BA_MSK) | BR_V )
+#define CONFIG_SYS_OR1_REMAP	CONFIG_SYS_OR0_REMAP
+#define CONFIG_SYS_OR1_PRELIM	CONFIG_SYS_OR0_PRELIM
+#define CONFIG_SYS_BR1_PRELIM	((FLASH_BASE1_PRELIM & BR_BA_MSK) | BR_V )
 
 /*
  * BR2/3 and OR2/3 (SDRAM)
@@ -392,19 +394,19 @@
 #define	SDRAM_MAX_SIZE		0x08000000	/* max 128 MB per bank	*/
 
 /* SDRAM timing: Multiplexed addresses, GPL5 output to GPL5_A (don't care)	*/
-#define CFG_OR_TIMING_SDRAM	0x00000A00
+#define CONFIG_SYS_OR_TIMING_SDRAM	0x00000A00
 
-#define CFG_OR2_PRELIM	(CFG_PRELIM_OR_AM | CFG_OR_TIMING_SDRAM )
-#define CFG_BR2_PRELIM	((SDRAM_BASE2_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
+#define CONFIG_SYS_OR2_PRELIM	(CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_SDRAM )
+#define CONFIG_SYS_BR2_PRELIM	((SDRAM_BASE2_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
 
 #ifndef	CONFIG_CAN_DRIVER
-#define	CFG_OR3_PRELIM	CFG_OR2_PRELIM
-#define CFG_BR3_PRELIM	((SDRAM_BASE3_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
+#define	CONFIG_SYS_OR3_PRELIM	CONFIG_SYS_OR2_PRELIM
+#define CONFIG_SYS_BR3_PRELIM	((SDRAM_BASE3_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
 #else	/* CAN uses CS3#, so we can have only one SDRAM bank anyway */
-#define	CFG_CAN_BASE		0xC0000000	/* CAN mapped at 0xC0000000	*/
-#define CFG_CAN_OR_AM		0xFFFF8000	/* 32 kB address mask		*/
-#define CFG_OR3_CAN		(CFG_CAN_OR_AM | OR_G5LA | OR_BI)
-#define CFG_BR3_CAN		((CFG_CAN_BASE & BR_BA_MSK) | \
+#define	CONFIG_SYS_CAN_BASE		0xC0000000	/* CAN mapped at 0xC0000000	*/
+#define CONFIG_SYS_CAN_OR_AM		0xFFFF8000	/* 32 kB address mask		*/
+#define CONFIG_SYS_OR3_CAN		(CONFIG_SYS_CAN_OR_AM | OR_G5LA | OR_BI)
+#define CONFIG_SYS_BR3_CAN		((CONFIG_SYS_CAN_BASE & BR_BA_MSK) | \
 					BR_PS_8 | BR_MS_UPMB | BR_V )
 #endif	/* CONFIG_CAN_DRIVER */
 
@@ -435,38 +437,38 @@
  * 80 Mhz => 80.000.000 / Divider = 156
  */
 
-#define CFG_PTA_PER_CLK	((4096 * 32 * 1000) / (4 * 64))
-#define CFG_MAMR_PTA	98
+#define CONFIG_SYS_PTA_PER_CLK	((4096 * 32 * 1000) / (4 * 64))
+#define CONFIG_SYS_MAMR_PTA	98
 
 /*
  * For 16 MBit, refresh rates could be 31.3 us
  * (= 64 ms / 2K = 125 / quad bursts).
  * For a simpler initialization, 15.6 us is used instead.
  *
- * #define CFG_MPTPR_2BK_2K	MPTPR_PTP_DIV32		for 2 banks
- * #define CFG_MPTPR_1BK_2K	MPTPR_PTP_DIV64		for 1 bank
+ * #define CONFIG_SYS_MPTPR_2BK_2K	MPTPR_PTP_DIV32		for 2 banks
+ * #define CONFIG_SYS_MPTPR_1BK_2K	MPTPR_PTP_DIV64		for 1 bank
  */
-#define CFG_MPTPR_2BK_4K	MPTPR_PTP_DIV16		/* setting for 2 banks	*/
-#define CFG_MPTPR_1BK_4K	MPTPR_PTP_DIV32		/* setting for 1 bank	*/
+#define CONFIG_SYS_MPTPR_2BK_4K	MPTPR_PTP_DIV16		/* setting for 2 banks	*/
+#define CONFIG_SYS_MPTPR_1BK_4K	MPTPR_PTP_DIV32		/* setting for 1 bank	*/
 
 /* refresh rate 7.8 us (= 64 ms / 8K = 31.2 / quad bursts) for 256 MBit		*/
-#define CFG_MPTPR_2BK_8K	MPTPR_PTP_DIV8		/* setting for 2 banks	*/
-#define CFG_MPTPR_1BK_8K	MPTPR_PTP_DIV16		/* setting for 1 bank	*/
+#define CONFIG_SYS_MPTPR_2BK_8K	MPTPR_PTP_DIV8		/* setting for 2 banks	*/
+#define CONFIG_SYS_MPTPR_1BK_8K	MPTPR_PTP_DIV16		/* setting for 1 bank	*/
 
 /*
  * MAMR settings for SDRAM
  */
 
 /* 8 column SDRAM */
-#define CFG_MAMR_8COL	((CFG_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
+#define CONFIG_SYS_MAMR_8COL	((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
 			 MAMR_AMA_TYPE_0 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A11 |	\
 			 MAMR_RLFA_1X	 | MAMR_WLFA_1X	   | MAMR_TLFA_4X)
 /* 9 column SDRAM */
-#define CFG_MAMR_9COL	((CFG_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
+#define CONFIG_SYS_MAMR_9COL	((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
 			 MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 |	\
 			 MAMR_RLFA_1X	 | MAMR_WLFA_1X	   | MAMR_TLFA_4X)
 /* 10 column SDRAM */
-#define CFG_MAMR_10COL	((CFG_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
+#define CONFIG_SYS_MAMR_10COL	((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
 			 MAMR_AMA_TYPE_2 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A9  |	\
 			 MAMR_RLFA_1X	 | MAMR_WLFA_1X	   | MAMR_TLFA_4X)
 
diff --git a/include/configs/TQM862L.h b/include/configs/TQM862L.h
index 6c610ee59..a7fcb1aaf 100644
--- a/include/configs/TQM862L.h
+++ b/include/configs/TQM862L.h
@@ -86,7 +86,7 @@
 #define CONFIG_BOOTCOMMAND	"run flash_self"
 
 #define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
-#undef	CFG_LOADS_BAUD_CHANGE		/* don't allow baudrate change	*/
+#undef	CONFIG_SYS_LOADS_BAUD_CHANGE		/* don't allow baudrate change	*/
 
 #undef	CONFIG_WATCHDOG			/* watchdog disabled		*/
 
@@ -131,32 +131,32 @@
 /*
  * Miscellaneous configurable options
  */
-#define	CFG_LONGHELP			/* undef to save memory		*/
-#define	CFG_PROMPT		"=> "	/* Monitor Command Prompt	*/
+#define	CONFIG_SYS_LONGHELP			/* undef to save memory		*/
+#define	CONFIG_SYS_PROMPT		"=> "	/* Monitor Command Prompt	*/
 
 #define CONFIG_CMDLINE_EDITING	1	/* add command line history	*/
-#define CFG_HUSH_PARSER		1	/* Use the HUSH parser		*/
-#ifdef	CFG_HUSH_PARSER
-#define	CFG_PROMPT_HUSH_PS2	"> "
+#define CONFIG_SYS_HUSH_PARSER		1	/* Use the HUSH parser		*/
+#ifdef	CONFIG_SYS_HUSH_PARSER
+#define	CONFIG_SYS_PROMPT_HUSH_PS2	"> "
 #endif
 
 #if defined(CONFIG_CMD_KGDB)
-#define	CFG_CBSIZE		1024	/* Console I/O Buffer Size	*/
+#define	CONFIG_SYS_CBSIZE		1024	/* Console I/O Buffer Size	*/
 #else
-#define	CFG_CBSIZE		256	/* Console I/O Buffer Size	*/
+#define	CONFIG_SYS_CBSIZE		256	/* Console I/O Buffer Size	*/
 #endif
-#define	CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define	CFG_MAXARGS		16	/* max number of command args	*/
-#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+#define	CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define	CONFIG_SYS_MAXARGS		16	/* max number of command args	*/
+#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
 
-#define CFG_MEMTEST_START	0x0400000	/* memtest works on	*/
-#define CFG_MEMTEST_END		0x0C00000	/* 4 ... 12 MB in DRAM	*/
+#define CONFIG_SYS_MEMTEST_START	0x0400000	/* memtest works on	*/
+#define CONFIG_SYS_MEMTEST_END		0x0C00000	/* 4 ... 12 MB in DRAM	*/
 
-#define	CFG_LOAD_ADDR		0x100000	/* default load address	*/
+#define	CONFIG_SYS_LOAD_ADDR		0x100000	/* default load address	*/
 
-#define	CFG_HZ			1000	/* decrementer freq: 1 ms ticks	*/
+#define	CONFIG_SYS_HZ			1000	/* decrementer freq: 1 ms ticks	*/
 
-#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
 
 /*
  * Low Level Configuration Settings
@@ -166,57 +166,59 @@
 /*-----------------------------------------------------------------------
  * Internal Memory Mapped Register
  */
-#define CFG_IMMR		0xFFF00000
+#define CONFIG_SYS_IMMR		0xFFF00000
 
 /*-----------------------------------------------------------------------
  * Definitions for initial stack pointer and data area (in DPRAM)
  */
-#define CFG_INIT_RAM_ADDR	CFG_IMMR
-#define	CFG_INIT_RAM_END	0x2F00	/* End of used area in DPRAM	*/
-#define	CFG_GBL_DATA_SIZE	64  /* size in bytes reserved for initial data */
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define	CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_IMMR
+#define	CONFIG_SYS_INIT_RAM_END	0x2F00	/* End of used area in DPRAM	*/
+#define	CONFIG_SYS_GBL_DATA_SIZE	64  /* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define	CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
 /*-----------------------------------------------------------------------
  * Start addresses for the final memory configuration
  * (Set up by the startup code)
- * Please note that CFG_SDRAM_BASE _must_ start at 0
+ * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
  */
-#define	CFG_SDRAM_BASE		0x00000000
-#define CFG_FLASH_BASE		0x40000000
-#define	CFG_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor	*/
-#define CFG_MONITOR_BASE	CFG_FLASH_BASE
-#define	CFG_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/
+#define	CONFIG_SYS_SDRAM_BASE		0x00000000
+#define CONFIG_SYS_FLASH_BASE		0x40000000
+#define	CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor	*/
+#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_FLASH_BASE
+#define	CONFIG_SYS_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/
 
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define	CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux	*/
+#define	CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux	*/
 
 /*-----------------------------------------------------------------------
  * FLASH organization
  */
 
 /* use CFI flash driver */
-#define CFG_FLASH_CFI		1	/* Flash is CFI conformant */
+#define CONFIG_SYS_FLASH_CFI		1	/* Flash is CFI conformant */
 #define CONFIG_FLASH_CFI_DRIVER	1	/* Use the common driver */
-#define CFG_FLASH_BANKS_LIST	{ CFG_FLASH_BASE, CFG_FLASH_BASE+flash_info[0].size }
-#define CFG_FLASH_EMPTY_INFO
-#define CFG_FLASH_USE_BUFFER_WRITE	1
-#define CFG_MAX_FLASH_BANKS	2	/* max number of memory banks */
-#define CFG_MAX_FLASH_SECT	71	/* max number of sectors on one chip */
+#define CONFIG_SYS_FLASH_BANKS_LIST	{ CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE+flash_info[0].size }
+#define CONFIG_SYS_FLASH_EMPTY_INFO
+#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE	1
+#define CONFIG_SYS_MAX_FLASH_BANKS	2	/* max number of memory banks */
+#define CONFIG_SYS_MAX_FLASH_SECT	71	/* max number of sectors on one chip */
 
-#define	CFG_ENV_IS_IN_FLASH	1
-#define	CFG_ENV_OFFSET		0x8000	/*   Offset   of Environment Sector	*/
-#define	CFG_ENV_SIZE		0x4000	/* Total Size of Environment Sector	*/
+#define	CONFIG_ENV_IS_IN_FLASH	1
+#define	CONFIG_ENV_OFFSET		0x8000	/*   Offset   of Environment Sector	*/
+#define	CONFIG_ENV_SIZE		0x4000	/* Total Size of Environment Sector	*/
 
 /* Address and size of Redundant Environment Sector	*/
-#define CFG_ENV_OFFSET_REDUND	(CFG_ENV_OFFSET+CFG_ENV_SIZE)
-#define CFG_ENV_SIZE_REDUND	(CFG_ENV_SIZE)
+#define CONFIG_ENV_OFFSET_REDUND	(CONFIG_ENV_OFFSET+CONFIG_ENV_SIZE)
+#define CONFIG_ENV_SIZE_REDUND	(CONFIG_ENV_SIZE)
 
-#define	CFG_USE_PPCENV			/* Environment embedded in sect .ppcenv */
+#define	CONFIG_SYS_USE_PPCENV			/* Environment embedded in sect .ppcenv */
+
+#define CONFIG_MISC_INIT_R		/* Make sure to remap flashes correctly */
 
 /*-----------------------------------------------------------------------
  * Dynamic MTD partition support
@@ -233,16 +235,16 @@
 /*-----------------------------------------------------------------------
  * Hardware Information Block
  */
-#define CFG_HWINFO_OFFSET	0x0003FFC0	/* offset of HW Info block */
-#define CFG_HWINFO_SIZE		0x00000040	/* size   of HW Info block */
-#define CFG_HWINFO_MAGIC	0x54514D38	/* 'TQM8' */
+#define CONFIG_SYS_HWINFO_OFFSET	0x0003FFC0	/* offset of HW Info block */
+#define CONFIG_SYS_HWINFO_SIZE		0x00000040	/* size   of HW Info block */
+#define CONFIG_SYS_HWINFO_MAGIC	0x54514D38	/* 'TQM8' */
 
 /*-----------------------------------------------------------------------
  * Cache Configuration
  */
-#define CFG_CACHELINE_SIZE	16	/* For all MPC8xx CPUs			*/
+#define CONFIG_SYS_CACHELINE_SIZE	16	/* For all MPC8xx CPUs			*/
 #if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT	4	/* log base 2 of the above value	*/
+#define CONFIG_SYS_CACHELINE_SHIFT	4	/* log base 2 of the above value	*/
 #endif
 
 /*-----------------------------------------------------------------------
@@ -252,10 +254,10 @@
  * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze
  */
 #if defined(CONFIG_WATCHDOG)
-#define CFG_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
+#define CONFIG_SYS_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
 			 SYPCR_SWE  | SYPCR_SWRI| SYPCR_SWP)
 #else
-#define CFG_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
+#define CONFIG_SYS_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
 #endif
 
 /*-----------------------------------------------------------------------
@@ -264,9 +266,9 @@
  * PCMCIA config., multi-function pin tri-state
  */
 #ifndef	CONFIG_CAN_DRIVER
-#define CFG_SIUMCR	(SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_MLRC01)
+#define CONFIG_SYS_SIUMCR	(SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_MLRC01)
 #else	/* we must activate GPL5 in the SIUMCR for CAN */
-#define CFG_SIUMCR	(SIUMCR_DBGC11 | SIUMCR_DBPC00 | SIUMCR_MLRC01)
+#define CONFIG_SYS_SIUMCR	(SIUMCR_DBGC11 | SIUMCR_DBPC00 | SIUMCR_MLRC01)
 #endif	/* CONFIG_CAN_DRIVER */
 
 /*-----------------------------------------------------------------------
@@ -274,20 +276,20 @@
  *-----------------------------------------------------------------------
  * Clear Reference Interrupt Status, Timebase freezing enabled
  */
-#define CFG_TBSCR	(TBSCR_REFA | TBSCR_REFB | TBSCR_TBF)
+#define CONFIG_SYS_TBSCR	(TBSCR_REFA | TBSCR_REFB | TBSCR_TBF)
 
 /*-----------------------------------------------------------------------
  * RTCSC - Real-Time Clock Status and Control Register		11-27
  *-----------------------------------------------------------------------
  */
-#define CFG_RTCSC	(RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE)
+#define CONFIG_SYS_RTCSC	(RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE)
 
 /*-----------------------------------------------------------------------
  * PISCR - Periodic Interrupt Status and Control		11-31
  *-----------------------------------------------------------------------
  * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
  */
-#define CFG_PISCR	(PISCR_PS | PISCR_PITF)
+#define CONFIG_SYS_PISCR	(PISCR_PS | PISCR_PITF)
 
 /*-----------------------------------------------------------------------
  * PLPRCR - PLL, Low-Power, and Reset Control Register		15-30
@@ -295,7 +297,7 @@
  * Reset PLL lock status sticky bit, timer expired status bit and timer
  * interrupt status bit
  */
-#define CFG_PLPRCR	(PLPRCR_SPLSS | PLPRCR_TEXPS | PLPRCR_TMIST)
+#define CONFIG_SYS_PLPRCR	(PLPRCR_SPLSS | PLPRCR_TEXPS | PLPRCR_TMIST)
 
 /*-----------------------------------------------------------------------
  * SCCR - System Clock and reset Control Register		15-27
@@ -304,7 +306,7 @@
  * power management and some other internal clocks
  */
 #define SCCR_MASK	SCCR_EBDF11
-#define CFG_SCCR	(SCCR_COM00   | SCCR_DFSYNC00 | SCCR_DFBRG00  | \
+#define CONFIG_SYS_SCCR	(SCCR_COM00   | SCCR_DFSYNC00 | SCCR_DFBRG00  | \
 			 SCCR_DFNL000 | SCCR_DFNH000  | SCCR_DFLCD000 | \
 			 SCCR_DFALCD00)
 
@@ -313,14 +315,14 @@
  *-----------------------------------------------------------------------
  *
  */
-#define CFG_PCMCIA_MEM_ADDR	(0xE0000000)
-#define CFG_PCMCIA_MEM_SIZE	( 64 << 20 )
-#define CFG_PCMCIA_DMA_ADDR	(0xE4000000)
-#define CFG_PCMCIA_DMA_SIZE	( 64 << 20 )
-#define CFG_PCMCIA_ATTRB_ADDR	(0xE8000000)
-#define CFG_PCMCIA_ATTRB_SIZE	( 64 << 20 )
-#define CFG_PCMCIA_IO_ADDR	(0xEC000000)
-#define CFG_PCMCIA_IO_SIZE	( 64 << 20 )
+#define CONFIG_SYS_PCMCIA_MEM_ADDR	(0xE0000000)
+#define CONFIG_SYS_PCMCIA_MEM_SIZE	( 64 << 20 )
+#define CONFIG_SYS_PCMCIA_DMA_ADDR	(0xE4000000)
+#define CONFIG_SYS_PCMCIA_DMA_SIZE	( 64 << 20 )
+#define CONFIG_SYS_PCMCIA_ATTRB_ADDR	(0xE8000000)
+#define CONFIG_SYS_PCMCIA_ATTRB_SIZE	( 64 << 20 )
+#define CONFIG_SYS_PCMCIA_IO_ADDR	(0xEC000000)
+#define CONFIG_SYS_PCMCIA_IO_SIZE	( 64 << 20 )
 
 /*-----------------------------------------------------------------------
  * IDE/ATA stuff (Supports IDE harddisk on PCMCIA Adapter)
@@ -333,28 +335,28 @@
 #undef	CONFIG_IDE_LED			/* LED   for ide not supported	*/
 #undef	CONFIG_IDE_RESET		/* reset for ide not supported	*/
 
-#define CFG_IDE_MAXBUS		1	/* max. 1 IDE bus		*/
-#define CFG_IDE_MAXDEVICE	1	/* max. 1 drive per IDE bus	*/
+#define CONFIG_SYS_IDE_MAXBUS		1	/* max. 1 IDE bus		*/
+#define CONFIG_SYS_IDE_MAXDEVICE	1	/* max. 1 drive per IDE bus	*/
 
-#define CFG_ATA_IDE0_OFFSET	0x0000
+#define CONFIG_SYS_ATA_IDE0_OFFSET	0x0000
 
-#define CFG_ATA_BASE_ADDR	CFG_PCMCIA_MEM_ADDR
+#define CONFIG_SYS_ATA_BASE_ADDR	CONFIG_SYS_PCMCIA_MEM_ADDR
 
 /* Offset for data I/O			*/
-#define CFG_ATA_DATA_OFFSET	(CFG_PCMCIA_MEM_SIZE + 0x320)
+#define CONFIG_SYS_ATA_DATA_OFFSET	(CONFIG_SYS_PCMCIA_MEM_SIZE + 0x320)
 
 /* Offset for normal register accesses	*/
-#define CFG_ATA_REG_OFFSET	(2 * CFG_PCMCIA_MEM_SIZE + 0x320)
+#define CONFIG_SYS_ATA_REG_OFFSET	(2 * CONFIG_SYS_PCMCIA_MEM_SIZE + 0x320)
 
 /* Offset for alternate registers	*/
-#define CFG_ATA_ALT_OFFSET	0x0100
+#define CONFIG_SYS_ATA_ALT_OFFSET	0x0100
 
 /*-----------------------------------------------------------------------
  *
  *-----------------------------------------------------------------------
  *
  */
-#define CFG_DER	0
+#define CONFIG_SYS_DER	0
 
 /*
  * Init Memory Controller:
@@ -369,22 +371,22 @@
  * restrict access enough to keep SRAM working (if any)
  * but not too much to meddle with FLASH accesses
  */
-#define CFG_REMAP_OR_AM		0x80000000	/* OR addr mask */
-#define CFG_PRELIM_OR_AM	0xE0000000	/* OR addr mask */
+#define CONFIG_SYS_REMAP_OR_AM		0x80000000	/* OR addr mask */
+#define CONFIG_SYS_PRELIM_OR_AM	0xE0000000	/* OR addr mask */
 
 /*
  * FLASH timing:
  */
-#define CFG_OR_TIMING_FLASH	(OR_ACS_DIV1  | OR_TRLX | OR_CSNT_SAM | \
+#define CONFIG_SYS_OR_TIMING_FLASH	(OR_ACS_DIV1  | OR_TRLX | OR_CSNT_SAM | \
 				 OR_SCY_3_CLK | OR_EHTR | OR_BI)
 
-#define CFG_OR0_REMAP	(CFG_REMAP_OR_AM  | CFG_OR_TIMING_FLASH)
-#define CFG_OR0_PRELIM	(CFG_PRELIM_OR_AM | CFG_OR_TIMING_FLASH)
-#define CFG_BR0_PRELIM	((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_V )
+#define CONFIG_SYS_OR0_REMAP	(CONFIG_SYS_REMAP_OR_AM  | CONFIG_SYS_OR_TIMING_FLASH)
+#define CONFIG_SYS_OR0_PRELIM	(CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_FLASH)
+#define CONFIG_SYS_BR0_PRELIM	((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_V )
 
-#define CFG_OR1_REMAP	CFG_OR0_REMAP
-#define CFG_OR1_PRELIM	CFG_OR0_PRELIM
-#define CFG_BR1_PRELIM	((FLASH_BASE1_PRELIM & BR_BA_MSK) | BR_V )
+#define CONFIG_SYS_OR1_REMAP	CONFIG_SYS_OR0_REMAP
+#define CONFIG_SYS_OR1_PRELIM	CONFIG_SYS_OR0_PRELIM
+#define CONFIG_SYS_BR1_PRELIM	((FLASH_BASE1_PRELIM & BR_BA_MSK) | BR_V )
 
 /*
  * BR2/3 and OR2/3 (SDRAM)
@@ -395,19 +397,19 @@
 #define	SDRAM_MAX_SIZE		0x04000000	/* max 64 MB per bank	*/
 
 /* SDRAM timing: Multiplexed addresses, GPL5 output to GPL5_A (don't care)	*/
-#define CFG_OR_TIMING_SDRAM	0x00000A00
+#define CONFIG_SYS_OR_TIMING_SDRAM	0x00000A00
 
-#define CFG_OR2_PRELIM	(CFG_PRELIM_OR_AM | CFG_OR_TIMING_SDRAM )
-#define CFG_BR2_PRELIM	((SDRAM_BASE2_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
+#define CONFIG_SYS_OR2_PRELIM	(CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_SDRAM )
+#define CONFIG_SYS_BR2_PRELIM	((SDRAM_BASE2_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
 
 #ifndef	CONFIG_CAN_DRIVER
-#define	CFG_OR3_PRELIM	CFG_OR2_PRELIM
-#define CFG_BR3_PRELIM	((SDRAM_BASE3_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
+#define	CONFIG_SYS_OR3_PRELIM	CONFIG_SYS_OR2_PRELIM
+#define CONFIG_SYS_BR3_PRELIM	((SDRAM_BASE3_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
 #else	/* CAN uses CS3#, so we can have only one SDRAM bank anyway */
-#define	CFG_CAN_BASE		0xC0000000	/* CAN mapped at 0xC0000000	*/
-#define CFG_CAN_OR_AM		0xFFFF8000	/* 32 kB address mask		*/
-#define CFG_OR3_CAN		(CFG_CAN_OR_AM | OR_G5LA | OR_BI)
-#define CFG_BR3_CAN		((CFG_CAN_BASE & BR_BA_MSK) | \
+#define	CONFIG_SYS_CAN_BASE		0xC0000000	/* CAN mapped at 0xC0000000	*/
+#define CONFIG_SYS_CAN_OR_AM		0xFFFF8000	/* 32 kB address mask		*/
+#define CONFIG_SYS_OR3_CAN		(CONFIG_SYS_CAN_OR_AM | OR_G5LA | OR_BI)
+#define CONFIG_SYS_BR3_CAN		((CONFIG_SYS_CAN_BASE & BR_BA_MSK) | \
 					BR_PS_8 | BR_MS_UPMB | BR_V )
 #endif	/* CONFIG_CAN_DRIVER */
 
@@ -439,34 +441,34 @@
  * 100 Mhz => 100.000.000 / Divider = 195
  */
 
-#define CFG_PTA_PER_CLK	((4096 * 32 * 1000) / (4 * 64))
-#define CFG_MAMR_PTA	98
+#define CONFIG_SYS_PTA_PER_CLK	((4096 * 32 * 1000) / (4 * 64))
+#define CONFIG_SYS_MAMR_PTA	98
 
 /*
  * For 16 MBit, refresh rates could be 31.3 us
  * (= 64 ms / 2K = 125 / quad bursts).
  * For a simpler initialization, 15.6 us is used instead.
  *
- * #define CFG_MPTPR_2BK_2K	MPTPR_PTP_DIV32		for 2 banks
- * #define CFG_MPTPR_1BK_2K	MPTPR_PTP_DIV64		for 1 bank
+ * #define CONFIG_SYS_MPTPR_2BK_2K	MPTPR_PTP_DIV32		for 2 banks
+ * #define CONFIG_SYS_MPTPR_1BK_2K	MPTPR_PTP_DIV64		for 1 bank
  */
-#define CFG_MPTPR_2BK_4K	MPTPR_PTP_DIV16		/* setting for 2 banks	*/
-#define CFG_MPTPR_1BK_4K	MPTPR_PTP_DIV32		/* setting for 1 bank	*/
+#define CONFIG_SYS_MPTPR_2BK_4K	MPTPR_PTP_DIV16		/* setting for 2 banks	*/
+#define CONFIG_SYS_MPTPR_1BK_4K	MPTPR_PTP_DIV32		/* setting for 1 bank	*/
 
 /* refresh rate 7.8 us (= 64 ms / 8K = 31.2 / quad bursts) for 256 MBit		*/
-#define CFG_MPTPR_2BK_8K	MPTPR_PTP_DIV8		/* setting for 2 banks	*/
-#define CFG_MPTPR_1BK_8K	MPTPR_PTP_DIV16		/* setting for 1 bank	*/
+#define CONFIG_SYS_MPTPR_2BK_8K	MPTPR_PTP_DIV8		/* setting for 2 banks	*/
+#define CONFIG_SYS_MPTPR_1BK_8K	MPTPR_PTP_DIV16		/* setting for 1 bank	*/
 
 /*
  * MAMR settings for SDRAM
  */
 
 /* 8 column SDRAM */
-#define CFG_MAMR_8COL	((CFG_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
+#define CONFIG_SYS_MAMR_8COL	((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
 			 MAMR_AMA_TYPE_0 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A11 |	\
 			 MAMR_RLFA_1X	 | MAMR_WLFA_1X	   | MAMR_TLFA_4X)
 /* 9 column SDRAM */
-#define CFG_MAMR_9COL	((CFG_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
+#define CONFIG_SYS_MAMR_9COL	((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
 			 MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 |	\
 			 MAMR_RLFA_1X	 | MAMR_WLFA_1X	   | MAMR_TLFA_4X)
 
diff --git a/include/configs/TQM862M.h b/include/configs/TQM862M.h
index 2eca59b99..bcf37d911 100644
--- a/include/configs/TQM862M.h
+++ b/include/configs/TQM862M.h
@@ -1,5 +1,5 @@
 /*
- * (C) Copyright 2000-2005
+ * (C) Copyright 2000-2008
  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
  *
  * See file CREDITS for list of people who contributed to this
@@ -86,7 +86,7 @@
 #define CONFIG_BOOTCOMMAND	"run flash_self"
 
 #define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
-#undef	CFG_LOADS_BAUD_CHANGE		/* don't allow baudrate change	*/
+#undef	CONFIG_SYS_LOADS_BAUD_CHANGE		/* don't allow baudrate change	*/
 
 #undef	CONFIG_WATCHDOG			/* watchdog disabled		*/
 
@@ -131,32 +131,32 @@
 /*
  * Miscellaneous configurable options
  */
-#define	CFG_LONGHELP			/* undef to save memory		*/
-#define	CFG_PROMPT		"=> "	/* Monitor Command Prompt	*/
+#define	CONFIG_SYS_LONGHELP			/* undef to save memory		*/
+#define	CONFIG_SYS_PROMPT		"=> "	/* Monitor Command Prompt	*/
 
 #define CONFIG_CMDLINE_EDITING	1	/* add command line history	*/
-#define CFG_HUSH_PARSER		1	/* Use the HUSH parser		*/
-#ifdef	CFG_HUSH_PARSER
-#define	CFG_PROMPT_HUSH_PS2	"> "
+#define CONFIG_SYS_HUSH_PARSER		1	/* Use the HUSH parser		*/
+#ifdef	CONFIG_SYS_HUSH_PARSER
+#define	CONFIG_SYS_PROMPT_HUSH_PS2	"> "
 #endif
 
 #if defined(CONFIG_CMD_KGDB)
-#define	CFG_CBSIZE		1024	/* Console I/O Buffer Size	*/
+#define	CONFIG_SYS_CBSIZE		1024	/* Console I/O Buffer Size	*/
 #else
-#define	CFG_CBSIZE		256	/* Console I/O Buffer Size	*/
+#define	CONFIG_SYS_CBSIZE		256	/* Console I/O Buffer Size	*/
 #endif
-#define	CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define	CFG_MAXARGS		16	/* max number of command args	*/
-#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+#define	CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define	CONFIG_SYS_MAXARGS		16	/* max number of command args	*/
+#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
 
-#define CFG_MEMTEST_START	0x0400000	/* memtest works on	*/
-#define CFG_MEMTEST_END		0x0C00000	/* 4 ... 12 MB in DRAM	*/
+#define CONFIG_SYS_MEMTEST_START	0x0400000	/* memtest works on	*/
+#define CONFIG_SYS_MEMTEST_END		0x0C00000	/* 4 ... 12 MB in DRAM	*/
 
-#define	CFG_LOAD_ADDR		0x100000	/* default load address	*/
+#define	CONFIG_SYS_LOAD_ADDR		0x100000	/* default load address	*/
 
-#define	CFG_HZ			1000	/* decrementer freq: 1 ms ticks	*/
+#define	CONFIG_SYS_HZ			1000	/* decrementer freq: 1 ms ticks	*/
 
-#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
 
 /*
  * Low Level Configuration Settings
@@ -166,58 +166,60 @@
 /*-----------------------------------------------------------------------
  * Internal Memory Mapped Register
  */
-#define CFG_IMMR		0xFFF00000
+#define CONFIG_SYS_IMMR		0xFFF00000
 
 /*-----------------------------------------------------------------------
  * Definitions for initial stack pointer and data area (in DPRAM)
  */
-#define CFG_INIT_RAM_ADDR	CFG_IMMR
-#define	CFG_INIT_RAM_END	0x2F00	/* End of used area in DPRAM	*/
-#define	CFG_GBL_DATA_SIZE	64  /* size in bytes reserved for initial data */
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define	CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_IMMR
+#define	CONFIG_SYS_INIT_RAM_END	0x2F00	/* End of used area in DPRAM	*/
+#define	CONFIG_SYS_GBL_DATA_SIZE	64  /* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define	CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
 /*-----------------------------------------------------------------------
  * Start addresses for the final memory configuration
  * (Set up by the startup code)
- * Please note that CFG_SDRAM_BASE _must_ start at 0
+ * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
  */
-#define	CFG_SDRAM_BASE		0x00000000
-#define CFG_FLASH_BASE		0x40000000
-#define	CFG_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor	*/
-#define CFG_MONITOR_BASE	CFG_FLASH_BASE
-#define	CFG_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/
+#define	CONFIG_SYS_SDRAM_BASE		0x00000000
+#define CONFIG_SYS_FLASH_BASE		0x40000000
+#define	CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor	*/
+#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_FLASH_BASE
+#define	CONFIG_SYS_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/
 
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define	CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux	*/
+#define	CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux	*/
 
 /*-----------------------------------------------------------------------
  * FLASH organization
  */
 
 /* use CFI flash driver */
-#define CFG_FLASH_CFI		1	/* Flash is CFI conformant */
+#define CONFIG_SYS_FLASH_CFI		1	/* Flash is CFI conformant */
 #define CONFIG_FLASH_CFI_DRIVER	1	/* Use the common driver */
-#define CFG_FLASH_BANKS_LIST	{ CFG_FLASH_BASE }
-#define CFG_FLASH_EMPTY_INFO
-#define CFG_FLASH_USE_BUFFER_WRITE	1
-#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks */
-#define CFG_MAX_FLASH_SECT	256	/* max number of sectors on one chip */
+#define CONFIG_SYS_FLASH_BANKS_LIST	{ CONFIG_SYS_FLASH_BASE }
+#define CONFIG_SYS_FLASH_EMPTY_INFO
+#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE	1
+#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks */
+#define CONFIG_SYS_MAX_FLASH_SECT	256	/* max number of sectors on one chip */
 
-#define	CFG_ENV_IS_IN_FLASH	1
-#define	CFG_ENV_OFFSET		0x40000	/*   Offset   of Environment Sector	*/
-#define	CFG_ENV_SIZE		0x08000	/* Total Size of Environment		*/
-#define	CFG_ENV_SECT_SIZE	0x20000	/* Total Size of Environment Sector	*/
+#define	CONFIG_ENV_IS_IN_FLASH	1
+#define	CONFIG_ENV_OFFSET		0x40000	/*   Offset   of Environment Sector	*/
+#define	CONFIG_ENV_SIZE		0x08000	/* Total Size of Environment		*/
+#define	CONFIG_ENV_SECT_SIZE	0x20000	/* Total Size of Environment Sector	*/
 
 /* Address and size of Redundant Environment Sector	*/
-#define CFG_ENV_OFFSET_REDUND	(CFG_ENV_OFFSET+CFG_ENV_SECT_SIZE)
-#define CFG_ENV_SIZE_REDUND	(CFG_ENV_SIZE)
+#define CONFIG_ENV_OFFSET_REDUND	(CONFIG_ENV_OFFSET+CONFIG_ENV_SECT_SIZE)
+#define CONFIG_ENV_SIZE_REDUND	(CONFIG_ENV_SIZE)
 
-#define	CFG_USE_PPCENV			/* Environment embedded in sect .ppcenv */
+#define	CONFIG_SYS_USE_PPCENV			/* Environment embedded in sect .ppcenv */
+
+#define CONFIG_MISC_INIT_R		/* Make sure to remap flashes correctly */
 
 /*-----------------------------------------------------------------------
  * Dynamic MTD partition support
@@ -234,16 +236,16 @@
 /*-----------------------------------------------------------------------
  * Hardware Information Block
  */
-#define CFG_HWINFO_OFFSET	0x0003FFC0	/* offset of HW Info block */
-#define CFG_HWINFO_SIZE		0x00000040	/* size   of HW Info block */
-#define CFG_HWINFO_MAGIC	0x54514D38	/* 'TQM8' */
+#define CONFIG_SYS_HWINFO_OFFSET	0x0003FFC0	/* offset of HW Info block */
+#define CONFIG_SYS_HWINFO_SIZE		0x00000040	/* size   of HW Info block */
+#define CONFIG_SYS_HWINFO_MAGIC	0x54514D38	/* 'TQM8' */
 
 /*-----------------------------------------------------------------------
  * Cache Configuration
  */
-#define CFG_CACHELINE_SIZE	16	/* For all MPC8xx CPUs			*/
+#define CONFIG_SYS_CACHELINE_SIZE	16	/* For all MPC8xx CPUs			*/
 #if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT	4	/* log base 2 of the above value	*/
+#define CONFIG_SYS_CACHELINE_SHIFT	4	/* log base 2 of the above value	*/
 #endif
 
 /*-----------------------------------------------------------------------
@@ -253,10 +255,10 @@
  * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze
  */
 #if defined(CONFIG_WATCHDOG)
-#define CFG_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
+#define CONFIG_SYS_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
 			 SYPCR_SWE  | SYPCR_SWRI| SYPCR_SWP)
 #else
-#define CFG_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
+#define CONFIG_SYS_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
 #endif
 
 /*-----------------------------------------------------------------------
@@ -265,9 +267,9 @@
  * PCMCIA config., multi-function pin tri-state
  */
 #ifndef	CONFIG_CAN_DRIVER
-#define CFG_SIUMCR	(SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_MLRC01)
+#define CONFIG_SYS_SIUMCR	(SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_MLRC01)
 #else	/* we must activate GPL5 in the SIUMCR for CAN */
-#define CFG_SIUMCR	(SIUMCR_DBGC11 | SIUMCR_DBPC00 | SIUMCR_MLRC01)
+#define CONFIG_SYS_SIUMCR	(SIUMCR_DBGC11 | SIUMCR_DBPC00 | SIUMCR_MLRC01)
 #endif	/* CONFIG_CAN_DRIVER */
 
 /*-----------------------------------------------------------------------
@@ -275,20 +277,20 @@
  *-----------------------------------------------------------------------
  * Clear Reference Interrupt Status, Timebase freezing enabled
  */
-#define CFG_TBSCR	(TBSCR_REFA | TBSCR_REFB | TBSCR_TBF)
+#define CONFIG_SYS_TBSCR	(TBSCR_REFA | TBSCR_REFB | TBSCR_TBF)
 
 /*-----------------------------------------------------------------------
  * RTCSC - Real-Time Clock Status and Control Register		11-27
  *-----------------------------------------------------------------------
  */
-#define CFG_RTCSC	(RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE)
+#define CONFIG_SYS_RTCSC	(RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE)
 
 /*-----------------------------------------------------------------------
  * PISCR - Periodic Interrupt Status and Control		11-31
  *-----------------------------------------------------------------------
  * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
  */
-#define CFG_PISCR	(PISCR_PS | PISCR_PITF)
+#define CONFIG_SYS_PISCR	(PISCR_PS | PISCR_PITF)
 
 /*-----------------------------------------------------------------------
  * PLPRCR - PLL, Low-Power, and Reset Control Register		15-30
@@ -296,7 +298,7 @@
  * Reset PLL lock status sticky bit, timer expired status bit and timer
  * interrupt status bit
  */
-#define CFG_PLPRCR	(PLPRCR_SPLSS | PLPRCR_TEXPS | PLPRCR_TMIST)
+#define CONFIG_SYS_PLPRCR	(PLPRCR_SPLSS | PLPRCR_TEXPS | PLPRCR_TMIST)
 
 /*-----------------------------------------------------------------------
  * SCCR - System Clock and reset Control Register		15-27
@@ -305,7 +307,7 @@
  * power management and some other internal clocks
  */
 #define SCCR_MASK	SCCR_EBDF11
-#define CFG_SCCR	(SCCR_COM00   | SCCR_DFSYNC00 | SCCR_DFBRG00  | \
+#define CONFIG_SYS_SCCR	(SCCR_COM00   | SCCR_DFSYNC00 | SCCR_DFBRG00  | \
 			 SCCR_DFNL000 | SCCR_DFNH000  | SCCR_DFLCD000 | \
 			 SCCR_DFALCD00)
 
@@ -314,14 +316,14 @@
  *-----------------------------------------------------------------------
  *
  */
-#define CFG_PCMCIA_MEM_ADDR	(0xE0000000)
-#define CFG_PCMCIA_MEM_SIZE	( 64 << 20 )
-#define CFG_PCMCIA_DMA_ADDR	(0xE4000000)
-#define CFG_PCMCIA_DMA_SIZE	( 64 << 20 )
-#define CFG_PCMCIA_ATTRB_ADDR	(0xE8000000)
-#define CFG_PCMCIA_ATTRB_SIZE	( 64 << 20 )
-#define CFG_PCMCIA_IO_ADDR	(0xEC000000)
-#define CFG_PCMCIA_IO_SIZE	( 64 << 20 )
+#define CONFIG_SYS_PCMCIA_MEM_ADDR	(0xE0000000)
+#define CONFIG_SYS_PCMCIA_MEM_SIZE	( 64 << 20 )
+#define CONFIG_SYS_PCMCIA_DMA_ADDR	(0xE4000000)
+#define CONFIG_SYS_PCMCIA_DMA_SIZE	( 64 << 20 )
+#define CONFIG_SYS_PCMCIA_ATTRB_ADDR	(0xE8000000)
+#define CONFIG_SYS_PCMCIA_ATTRB_SIZE	( 64 << 20 )
+#define CONFIG_SYS_PCMCIA_IO_ADDR	(0xEC000000)
+#define CONFIG_SYS_PCMCIA_IO_SIZE	( 64 << 20 )
 
 /*-----------------------------------------------------------------------
  * IDE/ATA stuff (Supports IDE harddisk on PCMCIA Adapter)
@@ -334,28 +336,28 @@
 #undef	CONFIG_IDE_LED			/* LED   for ide not supported	*/
 #undef	CONFIG_IDE_RESET		/* reset for ide not supported	*/
 
-#define CFG_IDE_MAXBUS		1	/* max. 1 IDE bus		*/
-#define CFG_IDE_MAXDEVICE	1	/* max. 1 drive per IDE bus	*/
+#define CONFIG_SYS_IDE_MAXBUS		1	/* max. 1 IDE bus		*/
+#define CONFIG_SYS_IDE_MAXDEVICE	1	/* max. 1 drive per IDE bus	*/
 
-#define CFG_ATA_IDE0_OFFSET	0x0000
+#define CONFIG_SYS_ATA_IDE0_OFFSET	0x0000
 
-#define CFG_ATA_BASE_ADDR	CFG_PCMCIA_MEM_ADDR
+#define CONFIG_SYS_ATA_BASE_ADDR	CONFIG_SYS_PCMCIA_MEM_ADDR
 
 /* Offset for data I/O			*/
-#define CFG_ATA_DATA_OFFSET	(CFG_PCMCIA_MEM_SIZE + 0x320)
+#define CONFIG_SYS_ATA_DATA_OFFSET	(CONFIG_SYS_PCMCIA_MEM_SIZE + 0x320)
 
 /* Offset for normal register accesses	*/
-#define CFG_ATA_REG_OFFSET	(2 * CFG_PCMCIA_MEM_SIZE + 0x320)
+#define CONFIG_SYS_ATA_REG_OFFSET	(2 * CONFIG_SYS_PCMCIA_MEM_SIZE + 0x320)
 
 /* Offset for alternate registers	*/
-#define CFG_ATA_ALT_OFFSET	0x0100
+#define CONFIG_SYS_ATA_ALT_OFFSET	0x0100
 
 /*-----------------------------------------------------------------------
  *
  *-----------------------------------------------------------------------
  *
  */
-#define CFG_DER	0
+#define CONFIG_SYS_DER	0
 
 /*
  * Init Memory Controller:
@@ -370,22 +372,22 @@
  * restrict access enough to keep SRAM working (if any)
  * but not too much to meddle with FLASH accesses
  */
-#define CFG_REMAP_OR_AM		0x80000000	/* OR addr mask */
-#define CFG_PRELIM_OR_AM	0xE0000000	/* OR addr mask */
+#define CONFIG_SYS_REMAP_OR_AM		0x80000000	/* OR addr mask */
+#define CONFIG_SYS_PRELIM_OR_AM	0xE0000000	/* OR addr mask */
 
 /*
  * FLASH timing:
  */
-#define CFG_OR_TIMING_FLASH	(OR_ACS_DIV1  | OR_TRLX | OR_CSNT_SAM | \
+#define CONFIG_SYS_OR_TIMING_FLASH	(OR_ACS_DIV1  | OR_TRLX | OR_CSNT_SAM | \
 				 OR_SCY_3_CLK | OR_EHTR | OR_BI)
 
-#define CFG_OR0_REMAP	(CFG_REMAP_OR_AM  | CFG_OR_TIMING_FLASH)
-#define CFG_OR0_PRELIM	(CFG_PRELIM_OR_AM | CFG_OR_TIMING_FLASH)
-#define CFG_BR0_PRELIM	((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_V )
+#define CONFIG_SYS_OR0_REMAP	(CONFIG_SYS_REMAP_OR_AM  | CONFIG_SYS_OR_TIMING_FLASH)
+#define CONFIG_SYS_OR0_PRELIM	(CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_FLASH)
+#define CONFIG_SYS_BR0_PRELIM	((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_V )
 
-#define CFG_OR1_REMAP	CFG_OR0_REMAP
-#define CFG_OR1_PRELIM	CFG_OR0_PRELIM
-#define CFG_BR1_PRELIM	((FLASH_BASE1_PRELIM & BR_BA_MSK) | BR_V )
+#define CONFIG_SYS_OR1_REMAP	CONFIG_SYS_OR0_REMAP
+#define CONFIG_SYS_OR1_PRELIM	CONFIG_SYS_OR0_PRELIM
+#define CONFIG_SYS_BR1_PRELIM	((FLASH_BASE1_PRELIM & BR_BA_MSK) | BR_V )
 
 /*
  * BR2/3 and OR2/3 (SDRAM)
@@ -396,19 +398,19 @@
 #define	SDRAM_MAX_SIZE		0x04000000	/* max 64 MB per bank	*/
 
 /* SDRAM timing: Multiplexed addresses, GPL5 output to GPL5_A (don't care)	*/
-#define CFG_OR_TIMING_SDRAM	0x00000A00
+#define CONFIG_SYS_OR_TIMING_SDRAM	0x00000A00
 
-#define CFG_OR2_PRELIM	(CFG_PRELIM_OR_AM | CFG_OR_TIMING_SDRAM )
-#define CFG_BR2_PRELIM	((SDRAM_BASE2_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
+#define CONFIG_SYS_OR2_PRELIM	(CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_SDRAM )
+#define CONFIG_SYS_BR2_PRELIM	((SDRAM_BASE2_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
 
 #ifndef	CONFIG_CAN_DRIVER
-#define	CFG_OR3_PRELIM	CFG_OR2_PRELIM
-#define CFG_BR3_PRELIM	((SDRAM_BASE3_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
+#define	CONFIG_SYS_OR3_PRELIM	CONFIG_SYS_OR2_PRELIM
+#define CONFIG_SYS_BR3_PRELIM	((SDRAM_BASE3_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
 #else	/* CAN uses CS3#, so we can have only one SDRAM bank anyway */
-#define	CFG_CAN_BASE		0xC0000000	/* CAN mapped at 0xC0000000	*/
-#define CFG_CAN_OR_AM		0xFFFF8000	/* 32 kB address mask		*/
-#define CFG_OR3_CAN		(CFG_CAN_OR_AM | OR_G5LA | OR_BI)
-#define CFG_BR3_CAN		((CFG_CAN_BASE & BR_BA_MSK) | \
+#define	CONFIG_SYS_CAN_BASE		0xC0000000	/* CAN mapped at 0xC0000000	*/
+#define CONFIG_SYS_CAN_OR_AM		0xFFFF8000	/* 32 kB address mask		*/
+#define CONFIG_SYS_OR3_CAN		(CONFIG_SYS_CAN_OR_AM | OR_G5LA | OR_BI)
+#define CONFIG_SYS_BR3_CAN		((CONFIG_SYS_CAN_BASE & BR_BA_MSK) | \
 					BR_PS_8 | BR_MS_UPMB | BR_V )
 #endif	/* CONFIG_CAN_DRIVER */
 
@@ -440,34 +442,34 @@
  * 100 Mhz => 100.000.000 / Divider = 195
  */
 
-#define CFG_PTA_PER_CLK	((4096 * 32 * 1000) / (4 * 64))
-#define CFG_MAMR_PTA	98
+#define CONFIG_SYS_PTA_PER_CLK	((4096 * 32 * 1000) / (4 * 64))
+#define CONFIG_SYS_MAMR_PTA	98
 
 /*
  * For 16 MBit, refresh rates could be 31.3 us
  * (= 64 ms / 2K = 125 / quad bursts).
  * For a simpler initialization, 15.6 us is used instead.
  *
- * #define CFG_MPTPR_2BK_2K	MPTPR_PTP_DIV32		for 2 banks
- * #define CFG_MPTPR_1BK_2K	MPTPR_PTP_DIV64		for 1 bank
+ * #define CONFIG_SYS_MPTPR_2BK_2K	MPTPR_PTP_DIV32		for 2 banks
+ * #define CONFIG_SYS_MPTPR_1BK_2K	MPTPR_PTP_DIV64		for 1 bank
  */
-#define CFG_MPTPR_2BK_4K	MPTPR_PTP_DIV16		/* setting for 2 banks	*/
-#define CFG_MPTPR_1BK_4K	MPTPR_PTP_DIV32		/* setting for 1 bank	*/
+#define CONFIG_SYS_MPTPR_2BK_4K	MPTPR_PTP_DIV16		/* setting for 2 banks	*/
+#define CONFIG_SYS_MPTPR_1BK_4K	MPTPR_PTP_DIV32		/* setting for 1 bank	*/
 
 /* refresh rate 7.8 us (= 64 ms / 8K = 31.2 / quad bursts) for 256 MBit		*/
-#define CFG_MPTPR_2BK_8K	MPTPR_PTP_DIV8		/* setting for 2 banks	*/
-#define CFG_MPTPR_1BK_8K	MPTPR_PTP_DIV16		/* setting for 1 bank	*/
+#define CONFIG_SYS_MPTPR_2BK_8K	MPTPR_PTP_DIV8		/* setting for 2 banks	*/
+#define CONFIG_SYS_MPTPR_1BK_8K	MPTPR_PTP_DIV16		/* setting for 1 bank	*/
 
 /*
  * MAMR settings for SDRAM
  */
 
 /* 8 column SDRAM */
-#define CFG_MAMR_8COL	((CFG_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
+#define CONFIG_SYS_MAMR_8COL	((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
 			 MAMR_AMA_TYPE_0 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A11 |	\
 			 MAMR_RLFA_1X	 | MAMR_WLFA_1X	   | MAMR_TLFA_4X)
 /* 9 column SDRAM */
-#define CFG_MAMR_9COL	((CFG_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
+#define CONFIG_SYS_MAMR_9COL	((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
 			 MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 |	\
 			 MAMR_RLFA_1X	 | MAMR_WLFA_1X	   | MAMR_TLFA_4X)
 
diff --git a/include/configs/TQM866M.h b/include/configs/TQM866M.h
index 4683286d7..87dc2649f 100644
--- a/include/configs/TQM866M.h
+++ b/include/configs/TQM866M.h
@@ -1,5 +1,5 @@
 /*
- * (C) Copyright 2000-2005
+ * (C) Copyright 2000-2008
  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
  *
  * See file CREDITS for list of people who contributed to this
@@ -37,17 +37,17 @@
 #define CONFIG_TQM866M		1	/* ...on a TQM8xxM module	*/
 
 #define CONFIG_8xx_OSCLK		10000000	/*  10 MHz - PLL input clock	*/
-#define CFG_8xx_CPUCLK_MIN		15000000	/*  15 MHz - CPU minimum clock	*/
-#define CFG_8xx_CPUCLK_MAX		133000000	/* 133 MHz - CPU maximum clock	*/
+#define CONFIG_SYS_8xx_CPUCLK_MIN		15000000	/*  15 MHz - CPU minimum clock	*/
+#define CONFIG_SYS_8xx_CPUCLK_MAX		133000000	/* 133 MHz - CPU maximum clock	*/
 #define CONFIG_8xx_CPUCLK_DEFAULT	50000000	/*  50 MHz - CPU default clock	*/
 						/* (it will be used if there is no	*/
 						/* 'cpuclk' variable with valid value)	*/
 
-#undef CFG_MEASURE_CPUCLK			/* Measure real cpu clock	*/
+#undef CONFIG_SYS_MEASURE_CPUCLK			/* Measure real cpu clock	*/
 						/* (function measure_gclk()	*/
 						/* will be called)		*/
-#ifdef CFG_MEASURE_CPUCLK
-#define CFG_8XX_XIN		10000000	/* measure_gclk() needs this	*/
+#ifdef CONFIG_SYS_MEASURE_CPUCLK
+#define CONFIG_SYS_8XX_XIN		10000000	/* measure_gclk() needs this	*/
 #endif
 
 #define CONFIG_8xx_CONS_SMC1	1	/* Console is on SMC1		*/
@@ -95,7 +95,7 @@
 #define CONFIG_BOOTCOMMAND	"run flash_self"
 
 #define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
-#undef	CFG_LOADS_BAUD_CHANGE		/* don't allow baudrate change	*/
+#undef	CONFIG_SYS_LOADS_BAUD_CHANGE		/* don't allow baudrate change	*/
 
 #undef	CONFIG_WATCHDOG			/* watchdog disabled		*/
 
@@ -107,8 +107,8 @@
 #undef	CONFIG_HARD_I2C			/* I2C with hardware support	*/
 #define CONFIG_SOFT_I2C		1	/* I2C bit-banged		*/
 
-#define CFG_I2C_SPEED		93000	/* 93 kHz is supposed to work	*/
-#define CFG_I2C_SLAVE		0xFE
+#define CONFIG_SYS_I2C_SPEED		93000	/* 93 kHz is supposed to work	*/
+#define CONFIG_SYS_I2C_SLAVE		0xFE
 
 #ifdef CONFIG_SOFT_I2C
 /*
@@ -128,10 +128,10 @@
 #define I2C_DELAY	udelay(2)	/* 1/4 I2C clock duration */
 #endif	/* CONFIG_SOFT_I2C */
 
-#define CFG_I2C_EEPROM_ADDR	0x50		/* EEPROM AT24C256	*/
-#define CFG_I2C_EEPROM_ADDR_LEN 2		/* two byte address	*/
-#define CFG_EEPROM_PAGE_WRITE_BITS	4
-#define CFG_EEPROM_PAGE_WRITE_DELAY_MS	10	/* and takes up to 10 msec */
+#define CONFIG_SYS_I2C_EEPROM_ADDR	0x50		/* EEPROM AT24C256	*/
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2		/* two byte address	*/
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS	4
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	10	/* and takes up to 10 msec */
 
 /*
  * BOOTP options
@@ -172,32 +172,32 @@
 /*
  * Miscellaneous configurable options
  */
-#define CFG_LONGHELP			/* undef to save memory		*/
-#define CFG_PROMPT		"=> "	/* Monitor Command Prompt	*/
+#define CONFIG_SYS_LONGHELP			/* undef to save memory		*/
+#define CONFIG_SYS_PROMPT		"=> "	/* Monitor Command Prompt	*/
 
 #define CONFIG_CMDLINE_EDITING	1	/* add command line history	*/
-#define CFG_HUSH_PARSER		1	/* Use the HUSH parser		*/
-#ifdef	CFG_HUSH_PARSER
-#define	CFG_PROMPT_HUSH_PS2	"> "
+#define CONFIG_SYS_HUSH_PARSER		1	/* Use the HUSH parser		*/
+#ifdef	CONFIG_SYS_HUSH_PARSER
+#define	CONFIG_SYS_PROMPT_HUSH_PS2	"> "
 #endif
 
 #if defined(CONFIG_CMD_KGDB)
-#define CFG_CBSIZE		1024	/* Console I/O Buffer Size	*/
+#define CONFIG_SYS_CBSIZE		1024	/* Console I/O Buffer Size	*/
 #else
-#define CFG_CBSIZE		256	/* Console I/O Buffer Size	*/
+#define CONFIG_SYS_CBSIZE		256	/* Console I/O Buffer Size	*/
 #endif
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define CFG_MAXARGS		16	/* max number of command args	*/
-#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS		16	/* max number of command args	*/
+#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
 
-#define CFG_MEMTEST_START	0x0400000	/* memtest works on	*/
-#define CFG_MEMTEST_END		0x0C00000	/* 4 ... 12 MB in DRAM	*/
+#define CONFIG_SYS_MEMTEST_START	0x0400000	/* memtest works on	*/
+#define CONFIG_SYS_MEMTEST_END		0x0C00000	/* 4 ... 12 MB in DRAM	*/
 
-#define CFG_LOAD_ADDR		0x100000	/* default load address */
+#define CONFIG_SYS_LOAD_ADDR		0x100000	/* default load address */
 
-#define CFG_HZ			1000	/* decrementer freq: 1 ms ticks */
+#define CONFIG_SYS_HZ			1000	/* decrementer freq: 1 ms ticks */
 
-#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
 
 /*
  * Low Level Configuration Settings
@@ -207,57 +207,59 @@
 /*-----------------------------------------------------------------------
  * Internal Memory Mapped Register
  */
-#define CFG_IMMR		0xFFF00000
+#define CONFIG_SYS_IMMR		0xFFF00000
 
 /*-----------------------------------------------------------------------
  * Definitions for initial stack pointer and data area (in DPRAM)
  */
-#define CFG_INIT_RAM_ADDR	CFG_IMMR
-#define CFG_INIT_RAM_END	0x2F00	/* End of used area in DPRAM	*/
-#define CFG_GBL_DATA_SIZE	64  /* size in bytes reserved for initial data */
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_IMMR
+#define CONFIG_SYS_INIT_RAM_END	0x2F00	/* End of used area in DPRAM	*/
+#define CONFIG_SYS_GBL_DATA_SIZE	64  /* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
 /*-----------------------------------------------------------------------
  * Start addresses for the final memory configuration
  * (Set up by the startup code)
- * Please note that CFG_SDRAM_BASE _must_ start at 0
+ * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
  */
-#define CFG_SDRAM_BASE		0x00000000
-#define CFG_FLASH_BASE		0x40000000
-#define CFG_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor	*/
-#define CFG_MONITOR_BASE	CFG_FLASH_BASE
-#define CFG_MALLOC_LEN		(256 << 10)	/* Reserve 256 kB for malloc()	*/
+#define CONFIG_SYS_SDRAM_BASE		0x00000000
+#define CONFIG_SYS_FLASH_BASE		0x40000000
+#define CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor	*/
+#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_FLASH_BASE
+#define CONFIG_SYS_MALLOC_LEN		(256 << 10)	/* Reserve 256 kB for malloc()	*/
 
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
+#define CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
 
 /*-----------------------------------------------------------------------
  * FLASH organization
  */
 /* use CFI flash driver */
-#define CFG_FLASH_CFI		1	/* Flash is CFI conformant */
+#define CONFIG_SYS_FLASH_CFI		1	/* Flash is CFI conformant */
 #define CONFIG_FLASH_CFI_DRIVER	1	/* Use the common driver */
-#define CFG_FLASH_BANKS_LIST	{ CFG_FLASH_BASE }
-#define CFG_FLASH_EMPTY_INFO
-#define CFG_FLASH_USE_BUFFER_WRITE	1
-#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks */
-#define CFG_MAX_FLASH_SECT	256	/* max number of sectors on one chip */
+#define CONFIG_SYS_FLASH_BANKS_LIST	{ CONFIG_SYS_FLASH_BASE }
+#define CONFIG_SYS_FLASH_EMPTY_INFO
+#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE	1
+#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks */
+#define CONFIG_SYS_MAX_FLASH_SECT	256	/* max number of sectors on one chip */
 
-#define CFG_ENV_IS_IN_FLASH	1
-#define CFG_ENV_OFFSET		0x40000 /*   Offset   of Environment Sector	*/
-#define CFG_ENV_SIZE		0x08000 /* Total Size of Environment Sector	*/
-#define CFG_ENV_SECT_SIZE	0x40000 /* Total Size of Environment Sector	*/
+#define CONFIG_ENV_IS_IN_FLASH	1
+#define CONFIG_ENV_OFFSET		0x40000 /*   Offset   of Environment Sector	*/
+#define CONFIG_ENV_SIZE		0x08000 /* Total Size of Environment Sector	*/
+#define CONFIG_ENV_SECT_SIZE	0x40000 /* Total Size of Environment Sector	*/
 
 /* Address and size of Redundant Environment Sector	*/
-#define CFG_ENV_OFFSET_REDUND	(CFG_ENV_OFFSET+CFG_ENV_SECT_SIZE)
-#define CFG_ENV_SIZE_REDUND	(CFG_ENV_SIZE)
+#define CONFIG_ENV_OFFSET_REDUND	(CONFIG_ENV_OFFSET+CONFIG_ENV_SECT_SIZE)
+#define CONFIG_ENV_SIZE_REDUND	(CONFIG_ENV_SIZE)
 
-#define	CFG_USE_PPCENV			/* Environment embedded in sect .ppcenv */
+#define	CONFIG_SYS_USE_PPCENV			/* Environment embedded in sect .ppcenv */
+
+#define CONFIG_MISC_INIT_R		/* Make sure to remap flashes correctly */
 
 /*-----------------------------------------------------------------------
  * Dynamic MTD partition support
@@ -274,16 +276,16 @@
 /*-----------------------------------------------------------------------
  * Hardware Information Block
  */
-#define CFG_HWINFO_OFFSET	0x0003FFC0	/* offset of HW Info block */
-#define CFG_HWINFO_SIZE		0x00000040	/* size	  of HW Info block */
-#define CFG_HWINFO_MAGIC	0x54514D38	/* 'TQM8' */
+#define CONFIG_SYS_HWINFO_OFFSET	0x0003FFC0	/* offset of HW Info block */
+#define CONFIG_SYS_HWINFO_SIZE		0x00000040	/* size	  of HW Info block */
+#define CONFIG_SYS_HWINFO_MAGIC	0x54514D38	/* 'TQM8' */
 
 /*-----------------------------------------------------------------------
  * Cache Configuration
  */
-#define CFG_CACHELINE_SIZE	16	/* For all MPC8xx CPUs			*/
+#define CONFIG_SYS_CACHELINE_SIZE	16	/* For all MPC8xx CPUs			*/
 #if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT	4	/* log base 2 of the above value	*/
+#define CONFIG_SYS_CACHELINE_SHIFT	4	/* log base 2 of the above value	*/
 #endif
 
 /*-----------------------------------------------------------------------
@@ -293,10 +295,10 @@
  * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze
  */
 #if defined(CONFIG_WATCHDOG)
-#define CFG_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
+#define CONFIG_SYS_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
 			 SYPCR_SWE  | SYPCR_SWRI| SYPCR_SWP)
 #else
-#define CFG_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
+#define CONFIG_SYS_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
 #endif
 
 /*-----------------------------------------------------------------------
@@ -305,9 +307,9 @@
  * PCMCIA config., multi-function pin tri-state
  */
 #ifndef CONFIG_CAN_DRIVER
-#define CFG_SIUMCR	(SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_MLRC01)
+#define CONFIG_SYS_SIUMCR	(SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_MLRC01)
 #else	/* we must activate GPL5 in the SIUMCR for CAN */
-#define CFG_SIUMCR	(SIUMCR_DBGC11 | SIUMCR_DBPC00 | SIUMCR_MLRC01)
+#define CONFIG_SYS_SIUMCR	(SIUMCR_DBGC11 | SIUMCR_DBPC00 | SIUMCR_MLRC01)
 #endif	/* CONFIG_CAN_DRIVER */
 
 /*-----------------------------------------------------------------------
@@ -315,14 +317,14 @@
  *-----------------------------------------------------------------------
  * Clear Reference Interrupt Status, Timebase freezing enabled
  */
-#define CFG_TBSCR	(TBSCR_REFA | TBSCR_REFB | TBSCR_TBF)
+#define CONFIG_SYS_TBSCR	(TBSCR_REFA | TBSCR_REFB | TBSCR_TBF)
 
 /*-----------------------------------------------------------------------
  * PISCR - Periodic Interrupt Status and Control		11-31
  *-----------------------------------------------------------------------
  * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
  */
-#define CFG_PISCR	(PISCR_PS | PISCR_PITF)
+#define CONFIG_SYS_PISCR	(PISCR_PS | PISCR_PITF)
 
 /*-----------------------------------------------------------------------
  * SCCR - System Clock and reset Control Register		15-27
@@ -331,7 +333,7 @@
  * power management and some other internal clocks
  */
 #define SCCR_MASK	SCCR_EBDF11
-#define CFG_SCCR	(SCCR_COM00   | SCCR_DFSYNC00 | SCCR_DFBRG00  | \
+#define CONFIG_SYS_SCCR	(SCCR_COM00   | SCCR_DFSYNC00 | SCCR_DFBRG00  | \
 			 SCCR_DFNL000 | SCCR_DFNH000  | SCCR_DFLCD000 | \
 			 SCCR_DFALCD00)
 
@@ -340,14 +342,14 @@
  *-----------------------------------------------------------------------
  *
  */
-#define CFG_PCMCIA_MEM_ADDR	(0xE0000000)
-#define CFG_PCMCIA_MEM_SIZE	( 64 << 20 )
-#define CFG_PCMCIA_DMA_ADDR	(0xE4000000)
-#define CFG_PCMCIA_DMA_SIZE	( 64 << 20 )
-#define CFG_PCMCIA_ATTRB_ADDR	(0xE8000000)
-#define CFG_PCMCIA_ATTRB_SIZE	( 64 << 20 )
-#define CFG_PCMCIA_IO_ADDR	(0xEC000000)
-#define CFG_PCMCIA_IO_SIZE	( 64 << 20 )
+#define CONFIG_SYS_PCMCIA_MEM_ADDR	(0xE0000000)
+#define CONFIG_SYS_PCMCIA_MEM_SIZE	( 64 << 20 )
+#define CONFIG_SYS_PCMCIA_DMA_ADDR	(0xE4000000)
+#define CONFIG_SYS_PCMCIA_DMA_SIZE	( 64 << 20 )
+#define CONFIG_SYS_PCMCIA_ATTRB_ADDR	(0xE8000000)
+#define CONFIG_SYS_PCMCIA_ATTRB_SIZE	( 64 << 20 )
+#define CONFIG_SYS_PCMCIA_IO_ADDR	(0xEC000000)
+#define CONFIG_SYS_PCMCIA_IO_SIZE	( 64 << 20 )
 
 /*-----------------------------------------------------------------------
  * IDE/ATA stuff (Supports IDE harddisk on PCMCIA Adapter)
@@ -360,28 +362,28 @@
 #undef	CONFIG_IDE_LED			/* LED	 for ide not supported	*/
 #undef	CONFIG_IDE_RESET		/* reset for ide not supported	*/
 
-#define CFG_IDE_MAXBUS		1	/* max. 1 IDE bus		*/
-#define CFG_IDE_MAXDEVICE	1	/* max. 1 drive per IDE bus	*/
+#define CONFIG_SYS_IDE_MAXBUS		1	/* max. 1 IDE bus		*/
+#define CONFIG_SYS_IDE_MAXDEVICE	1	/* max. 1 drive per IDE bus	*/
 
-#define CFG_ATA_IDE0_OFFSET	0x0000
+#define CONFIG_SYS_ATA_IDE0_OFFSET	0x0000
 
-#define CFG_ATA_BASE_ADDR	CFG_PCMCIA_MEM_ADDR
+#define CONFIG_SYS_ATA_BASE_ADDR	CONFIG_SYS_PCMCIA_MEM_ADDR
 
 /* Offset for data I/O			*/
-#define CFG_ATA_DATA_OFFSET	(CFG_PCMCIA_MEM_SIZE + 0x320)
+#define CONFIG_SYS_ATA_DATA_OFFSET	(CONFIG_SYS_PCMCIA_MEM_SIZE + 0x320)
 
 /* Offset for normal register accesses	*/
-#define CFG_ATA_REG_OFFSET	(2 * CFG_PCMCIA_MEM_SIZE + 0x320)
+#define CONFIG_SYS_ATA_REG_OFFSET	(2 * CONFIG_SYS_PCMCIA_MEM_SIZE + 0x320)
 
 /* Offset for alternate registers	*/
-#define CFG_ATA_ALT_OFFSET	0x0100
+#define CONFIG_SYS_ATA_ALT_OFFSET	0x0100
 
 /*-----------------------------------------------------------------------
  *
  *-----------------------------------------------------------------------
  *
  */
-#define CFG_DER 0
+#define CONFIG_SYS_DER 0
 
 /*
  * Init Memory Controller:
@@ -396,22 +398,22 @@
  * restrict access enough to keep SRAM working (if any)
  * but not too much to meddle with FLASH accesses
  */
-#define CFG_REMAP_OR_AM		0x80000000	/* OR addr mask */
-#define CFG_PRELIM_OR_AM	0xE0000000	/* OR addr mask */
+#define CONFIG_SYS_REMAP_OR_AM		0x80000000	/* OR addr mask */
+#define CONFIG_SYS_PRELIM_OR_AM	0xE0000000	/* OR addr mask */
 
 /*
  * FLASH timing: Default value of OR0 after reset
  */
-#define CFG_OR_TIMING_FLASH	(OR_CSNT_SAM | OR_ACS_MSK | OR_BI | \
+#define CONFIG_SYS_OR_TIMING_FLASH	(OR_CSNT_SAM | OR_ACS_MSK | OR_BI | \
 				 OR_SCY_15_CLK | OR_TRLX)
 
-#define CFG_OR0_REMAP	(CFG_REMAP_OR_AM  | CFG_OR_TIMING_FLASH)
-#define CFG_OR0_PRELIM	(CFG_PRELIM_OR_AM | CFG_OR_TIMING_FLASH)
-#define CFG_BR0_PRELIM	((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_V )
+#define CONFIG_SYS_OR0_REMAP	(CONFIG_SYS_REMAP_OR_AM  | CONFIG_SYS_OR_TIMING_FLASH)
+#define CONFIG_SYS_OR0_PRELIM	(CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_FLASH)
+#define CONFIG_SYS_BR0_PRELIM	((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_V )
 
-#define CFG_OR1_REMAP	CFG_OR0_REMAP
-#define CFG_OR1_PRELIM	CFG_OR0_PRELIM
-#define CFG_BR1_PRELIM	((FLASH_BASE1_PRELIM & BR_BA_MSK) | BR_V )
+#define CONFIG_SYS_OR1_REMAP	CONFIG_SYS_OR0_REMAP
+#define CONFIG_SYS_OR1_PRELIM	CONFIG_SYS_OR0_PRELIM
+#define CONFIG_SYS_BR1_PRELIM	((FLASH_BASE1_PRELIM & BR_BA_MSK) | BR_V )
 
 /*
  * BR2/3 and OR2/3 (SDRAM)
@@ -422,19 +424,19 @@
 #define SDRAM_MAX_SIZE		(256 << 20)	/* max 256 MB per bank	*/
 
 /* SDRAM timing: Multiplexed addresses, GPL5 output to GPL5_A (don't care)	*/
-#define CFG_OR_TIMING_SDRAM	0x00000A00
+#define CONFIG_SYS_OR_TIMING_SDRAM	0x00000A00
 
-#define CFG_OR2_PRELIM	(CFG_PRELIM_OR_AM | CFG_OR_TIMING_SDRAM )
-#define CFG_BR2_PRELIM	((SDRAM_BASE2_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
+#define CONFIG_SYS_OR2_PRELIM	(CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_SDRAM )
+#define CONFIG_SYS_BR2_PRELIM	((SDRAM_BASE2_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
 
 #ifndef CONFIG_CAN_DRIVER
-#define CFG_OR3_PRELIM	CFG_OR2_PRELIM
-#define CFG_BR3_PRELIM	((SDRAM_BASE3_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
+#define CONFIG_SYS_OR3_PRELIM	CONFIG_SYS_OR2_PRELIM
+#define CONFIG_SYS_BR3_PRELIM	((SDRAM_BASE3_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
 #else	/* CAN uses CS3#, so we can have only one SDRAM bank anyway */
-#define CFG_CAN_BASE		0xC0000000	/* CAN mapped at 0xC0000000	*/
-#define CFG_CAN_OR_AM		0xFFFF8000	/* 32 kB address mask		*/
-#define CFG_OR3_CAN		(CFG_CAN_OR_AM | OR_G5LA | OR_BI)
-#define CFG_BR3_CAN		((CFG_CAN_BASE & BR_BA_MSK) | \
+#define CONFIG_SYS_CAN_BASE		0xC0000000	/* CAN mapped at 0xC0000000	*/
+#define CONFIG_SYS_CAN_OR_AM		0xFFFF8000	/* 32 kB address mask		*/
+#define CONFIG_SYS_OR3_CAN		(CONFIG_SYS_CAN_OR_AM | OR_G5LA | OR_BI)
+#define CONFIG_SYS_BR3_CAN		((CONFIG_SYS_CAN_BASE & BR_BA_MSK) | \
 					BR_PS_8 | BR_MS_UPMB | BR_V )
 #endif	/* CONFIG_CAN_DRIVER */
 
@@ -445,48 +447,48 @@
  * 4	Number of refresh cycles per period
  * 64	Refresh cycle in ms per number of rows
  */
-#define CFG_PTA_PER_CLK	((4096 * 64 * 1000) / (4 * 64))
+#define CONFIG_SYS_PTA_PER_CLK	((4096 * 64 * 1000) / (4 * 64))
 
 /*
  * Periodic timer (MAMR[PTx]) for 4 * 7.8 us refresh (= 31.2 us per quad)
  *
  *                        CPUclock(MHz) * 31.2
- * CFG_MAMR_PTA = -----------------------------------     with DFBRG = 0
+ * CONFIG_SYS_MAMR_PTA = -----------------------------------     with DFBRG = 0
  *                2^(2*SCCR[DFBRG]) * MPTPR_PTP_DIV16
  *
- * CPU clock =  15 MHz:  CFG_MAMR_PTA =  29   ->  4 * 7.73 us
- * CPU clock =  50 MHz:  CFG_MAMR_PTA =  97   ->  4 * 7.76 us
- * CPU clock =  66 MHz:  CFG_MAMR_PTA = 128   ->  4 * 7.75 us
- * CPU clock = 133 MHz:  CFG_MAMR_PTA = 255   ->  4 * 7.67 us
+ * CPU clock =  15 MHz:  CONFIG_SYS_MAMR_PTA =  29   ->  4 * 7.73 us
+ * CPU clock =  50 MHz:  CONFIG_SYS_MAMR_PTA =  97   ->  4 * 7.76 us
+ * CPU clock =  66 MHz:  CONFIG_SYS_MAMR_PTA = 128   ->  4 * 7.75 us
+ * CPU clock = 133 MHz:  CONFIG_SYS_MAMR_PTA = 255   ->  4 * 7.67 us
  *
  * Value 97 is for 4 * 7.8 us at 50 MHz. So the refresh cycle requirement will
  * be met also in the default configuration, i.e. if environment variable
  * 'cpuclk' is not set.
  */
-#define CFG_MAMR_PTA		97
+#define CONFIG_SYS_MAMR_PTA		97
 
 /*
  * Memory Periodic Timer Prescaler Register (MPTPR) values.
  */
 /* 4 * 7.8 us refresh (= 31.2 us per quad) at 50 MHz and PTA = 97 */
-#define CFG_MPTPR_2BK_4K	MPTPR_PTP_DIV16
+#define CONFIG_SYS_MPTPR_2BK_4K	MPTPR_PTP_DIV16
 /* 4 * 3.9 us refresh (= 15.6 us per quad) at 50 MHz and PTA = 97 */
-#define CFG_MPTPR_2BK_8K	MPTPR_PTP_DIV8
+#define CONFIG_SYS_MPTPR_2BK_8K	MPTPR_PTP_DIV8
 
 /*
  * MAMR settings for SDRAM
  */
 
 /* 8 column SDRAM */
-#define CFG_MAMR_8COL	((CFG_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
+#define CONFIG_SYS_MAMR_8COL	((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
 			 MAMR_AMA_TYPE_0 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A11 |	\
 			 MAMR_RLFA_1X	 | MAMR_WLFA_1X	   | MAMR_TLFA_4X)
 /* 9 column SDRAM */
-#define CFG_MAMR_9COL	((CFG_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
+#define CONFIG_SYS_MAMR_9COL	((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
 			 MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 |	\
 			 MAMR_RLFA_1X	 | MAMR_WLFA_1X	   | MAMR_TLFA_4X)
 /* 10 column SDRAM */
-#define CFG_MAMR_10COL	((CFG_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
+#define CONFIG_SYS_MAMR_10COL	((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
 			 MAMR_AMA_TYPE_2 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A9  |	\
 			 MAMR_RLFA_1X	 | MAMR_WLFA_1X	   | MAMR_TLFA_4X)
 
diff --git a/include/configs/TQM885D.h b/include/configs/TQM885D.h
index 5daaf04be..942bbf604 100644
--- a/include/configs/TQM885D.h
+++ b/include/configs/TQM885D.h
@@ -40,8 +40,8 @@
 #define CONFIG_TQM885D		1	/* ...on a TQM88D module	*/
 
 #define CONFIG_8xx_OSCLK		10000000	/*  10 MHz - PLL input clock	*/
-#define CFG_8xx_CPUCLK_MIN		15000000	/*  15 MHz - CPU minimum clock	*/
-#define CFG_8xx_CPUCLK_MAX		133000000	/* 133 MHz - CPU maximum clock	*/
+#define CONFIG_SYS_8xx_CPUCLK_MIN		15000000	/*  15 MHz - CPU minimum clock	*/
+#define CONFIG_SYS_8xx_CPUCLK_MAX		133000000	/* 133 MHz - CPU maximum clock	*/
 #define CONFIG_8xx_CPUCLK_DEFAULT	66000000	/*  66 MHz - CPU default clock	*/
 						/* (it will be used if there is no	*/
 						/* 'cpuclk' variable with valid value)	*/
@@ -89,7 +89,7 @@
 #define CONFIG_BOOTCOMMAND	"run flash_self"
 
 #define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
-#undef	CFG_LOADS_BAUD_CHANGE		/* don't allow baudrate change	*/
+#undef	CONFIG_SYS_LOADS_BAUD_CHANGE		/* don't allow baudrate change	*/
 
 #undef	CONFIG_WATCHDOG			/* watchdog disabled		*/
 
@@ -101,8 +101,8 @@
 #undef	CONFIG_HARD_I2C			/* I2C with hardware support	*/
 #define CONFIG_SOFT_I2C		1	/* I2C bit-banged		*/
 
-#define CFG_I2C_SPEED		93000	/* 93 kHz is supposed to work	*/
-#define CFG_I2C_SLAVE		0xFE
+#define CONFIG_SYS_I2C_SPEED		93000	/* 93 kHz is supposed to work	*/
+#define CONFIG_SYS_I2C_SLAVE		0xFE
 
 #ifdef CONFIG_SOFT_I2C
 /*
@@ -122,13 +122,13 @@
 #define I2C_DELAY	udelay(2)	/* 1/4 I2C clock duration */
 #endif	/* CONFIG_SOFT_I2C */
 
-#define CFG_I2C_EEPROM_ADDR	0x50		/* EEPROM AT24C??	*/
-#define CFG_I2C_EEPROM_ADDR_LEN 2		/* two byte address	*/
-#define CFG_EEPROM_PAGE_WRITE_BITS	4
-#define CFG_EEPROM_PAGE_WRITE_DELAY_MS	10	/* and takes up to 10 msec */
+#define CONFIG_SYS_I2C_EEPROM_ADDR	0x50		/* EEPROM AT24C??	*/
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2		/* two byte address	*/
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS	4
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	10	/* and takes up to 10 msec */
 
 # define CONFIG_RTC_DS1337 1
-# define CFG_I2C_RTC_ADDR 0x68
+# define CONFIG_SYS_I2C_RTC_ADDR 0x68
 
 /*
  * BOOTP options
@@ -167,34 +167,34 @@
 /*
  * Miscellaneous configurable options
  */
-#define CFG_LONGHELP			/* undef to save memory		*/
-#define CFG_PROMPT		"=> "	/* Monitor Command Prompt	*/
+#define CONFIG_SYS_LONGHELP			/* undef to save memory		*/
+#define CONFIG_SYS_PROMPT		"=> "	/* Monitor Command Prompt	*/
 
 #define CONFIG_CMDLINE_EDITING	1	/* add command line history	*/
-#define CFG_HUSH_PARSER		1	/* Use the HUSH parser		*/
-#ifdef	CFG_HUSH_PARSER
-#define	CFG_PROMPT_HUSH_PS2	"> "
+#define CONFIG_SYS_HUSH_PARSER		1	/* Use the HUSH parser		*/
+#ifdef	CONFIG_SYS_HUSH_PARSER
+#define	CONFIG_SYS_PROMPT_HUSH_PS2	"> "
 #endif
 
 #if defined(CONFIG_CMD_KGDB)
-#define CFG_CBSIZE		1024	/* Console I/O Buffer Size	*/
+#define CONFIG_SYS_CBSIZE		1024	/* Console I/O Buffer Size	*/
 #else
-#define CFG_CBSIZE		256	/* Console I/O Buffer Size	*/
+#define CONFIG_SYS_CBSIZE		256	/* Console I/O Buffer Size	*/
 #endif
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define CFG_MAXARGS		16	/* max number of command args	*/
-#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS		16	/* max number of command args	*/
+#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
 
-#define CFG_MEMTEST_START	0x0100000	/* memtest works on	*/
-#define CFG_MEMTEST_END		0x0300000	/* 1 ... 3 MB in DRAM	*/
-#define CFG_ALT_MEMTEST				/* alternate, more extensive
+#define CONFIG_SYS_MEMTEST_START	0x0100000	/* memtest works on	*/
+#define CONFIG_SYS_MEMTEST_END		0x0300000	/* 1 ... 3 MB in DRAM	*/
+#define CONFIG_SYS_ALT_MEMTEST				/* alternate, more extensive
 						   memory test.*/
 
-#define CFG_LOAD_ADDR		0x100000	/* default load address */
+#define CONFIG_SYS_LOAD_ADDR		0x100000	/* default load address */
 
-#define CFG_HZ			1000	/* decrementer freq: 1 ms ticks */
+#define CONFIG_SYS_HZ			1000	/* decrementer freq: 1 ms ticks */
 
-#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
 
 /*
  * Enable loopw command.
@@ -209,70 +209,70 @@
 /*-----------------------------------------------------------------------
  * Internal Memory Mapped Register
  */
-#define CFG_IMMR		0xFFF00000
+#define CONFIG_SYS_IMMR		0xFFF00000
 
 /*-----------------------------------------------------------------------
  * Definitions for initial stack pointer and data area (in DPRAM)
  */
-#define CFG_INIT_RAM_ADDR	CFG_IMMR
-#define CFG_INIT_RAM_END	0x2F00	/* End of used area in DPRAM	*/
-#define CFG_GBL_DATA_SIZE	64  /* size in bytes reserved for initial data */
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_IMMR
+#define CONFIG_SYS_INIT_RAM_END	0x2F00	/* End of used area in DPRAM	*/
+#define CONFIG_SYS_GBL_DATA_SIZE	64  /* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
 /*-----------------------------------------------------------------------
  * Start addresses for the final memory configuration
  * (Set up by the startup code)
- * Please note that CFG_SDRAM_BASE _must_ start at 0
+ * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
  */
-#define CFG_SDRAM_BASE		0x00000000
-#define CFG_FLASH_BASE		0x40000000
-#define CFG_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor	*/
-#define CFG_MONITOR_BASE	CFG_FLASH_BASE
-#define CFG_MALLOC_LEN		(256 << 10)	/* Reserve 128 kB for malloc()	*/
+#define CONFIG_SYS_SDRAM_BASE		0x00000000
+#define CONFIG_SYS_FLASH_BASE		0x40000000
+#define CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor	*/
+#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_FLASH_BASE
+#define CONFIG_SYS_MALLOC_LEN		(256 << 10)	/* Reserve 128 kB for malloc()	*/
 
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
+#define CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
 
 /*-----------------------------------------------------------------------
  * FLASH organization
  */
 
 /* use CFI flash driver */
-#define CFG_FLASH_CFI		1	/* Flash is CFI conformant */
+#define CONFIG_SYS_FLASH_CFI		1	/* Flash is CFI conformant */
 #define CONFIG_FLASH_CFI_DRIVER	1	/* Use the common driver */
-#define CFG_FLASH_BANKS_LIST	{ CFG_FLASH_BASE }
-#define CFG_FLASH_EMPTY_INFO
-#define CFG_FLASH_USE_BUFFER_WRITE	1
-#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks */
-#define CFG_MAX_FLASH_SECT	256	/* max number of sectors on one chip */
+#define CONFIG_SYS_FLASH_BANKS_LIST	{ CONFIG_SYS_FLASH_BASE }
+#define CONFIG_SYS_FLASH_EMPTY_INFO
+#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE	1
+#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks */
+#define CONFIG_SYS_MAX_FLASH_SECT	256	/* max number of sectors on one chip */
 
-#define CFG_ENV_IS_IN_FLASH	1
-#define CFG_ENV_OFFSET		0x40000 /*   Offset   of Environment Sector	*/
-#define CFG_ENV_SIZE		0x08000 /* Total Size of Environment		*/
-#define CFG_ENV_SECT_SIZE	0x40000 /* Total Size of Environment Sector	*/
+#define CONFIG_ENV_IS_IN_FLASH	1
+#define CONFIG_ENV_OFFSET		0x40000 /*   Offset   of Environment Sector	*/
+#define CONFIG_ENV_SIZE		0x08000 /* Total Size of Environment		*/
+#define CONFIG_ENV_SECT_SIZE	0x40000 /* Total Size of Environment Sector	*/
 
 /* Address and size of Redundant Environment Sector	*/
-#define CFG_ENV_OFFSET_REDUND	(CFG_ENV_OFFSET+CFG_ENV_SECT_SIZE)
-#define CFG_ENV_SIZE_REDUND	(CFG_ENV_SIZE)
+#define CONFIG_ENV_OFFSET_REDUND	(CONFIG_ENV_OFFSET+CONFIG_ENV_SECT_SIZE)
+#define CONFIG_ENV_SIZE_REDUND	(CONFIG_ENV_SIZE)
 
 /*-----------------------------------------------------------------------
  * Hardware Information Block
  */
-#define CFG_HWINFO_OFFSET	0x0003FFC0	/* offset of HW Info block */
-#define CFG_HWINFO_SIZE		0x00000040	/* size	  of HW Info block */
-#define CFG_HWINFO_MAGIC	0x54514D38	/* 'TQM8' */
+#define CONFIG_SYS_HWINFO_OFFSET	0x0003FFC0	/* offset of HW Info block */
+#define CONFIG_SYS_HWINFO_SIZE		0x00000040	/* size	  of HW Info block */
+#define CONFIG_SYS_HWINFO_MAGIC	0x54514D38	/* 'TQM8' */
 
 /*-----------------------------------------------------------------------
  * Cache Configuration
  */
-#define CFG_CACHELINE_SIZE	16	/* For all MPC8xx CPUs			*/
+#define CONFIG_SYS_CACHELINE_SIZE	16	/* For all MPC8xx CPUs			*/
 #if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT	4	/* log base 2 of the above value	*/
+#define CONFIG_SYS_CACHELINE_SHIFT	4	/* log base 2 of the above value	*/
 #endif
 
 /*-----------------------------------------------------------------------
@@ -282,10 +282,10 @@
  * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze
  */
 #if defined(CONFIG_WATCHDOG)
-#define CFG_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
+#define CONFIG_SYS_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
 			 SYPCR_SWE  | SYPCR_SWRI| SYPCR_SWP)
 #else
-#define CFG_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
+#define CONFIG_SYS_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
 #endif
 
 /*-----------------------------------------------------------------------
@@ -294,9 +294,9 @@
  * PCMCIA config., multi-function pin tri-state
  */
 #ifndef CONFIG_CAN_DRIVER
-#define CFG_SIUMCR	(SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_MLRC01)
+#define CONFIG_SYS_SIUMCR	(SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_MLRC01)
 #else	/* we must activate GPL5 in the SIUMCR for CAN */
-#define CFG_SIUMCR	(SIUMCR_DBGC11 | SIUMCR_DBPC00 | SIUMCR_MLRC01)
+#define CONFIG_SYS_SIUMCR	(SIUMCR_DBGC11 | SIUMCR_DBPC00 | SIUMCR_MLRC01)
 #endif	/* CONFIG_CAN_DRIVER */
 
 /*-----------------------------------------------------------------------
@@ -304,14 +304,14 @@
  *-----------------------------------------------------------------------
  * Clear Reference Interrupt Status, Timebase freezing enabled
  */
-#define CFG_TBSCR	(TBSCR_REFA | TBSCR_REFB | TBSCR_TBF)
+#define CONFIG_SYS_TBSCR	(TBSCR_REFA | TBSCR_REFB | TBSCR_TBF)
 
 /*-----------------------------------------------------------------------
  * PISCR - Periodic Interrupt Status and Control		11-31
  *-----------------------------------------------------------------------
  * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
  */
-#define CFG_PISCR	(PISCR_PS | PISCR_PITF)
+#define CONFIG_SYS_PISCR	(PISCR_PS | PISCR_PITF)
 
 /*-----------------------------------------------------------------------
  * SCCR - System Clock and reset Control Register		15-27
@@ -320,7 +320,7 @@
  * power management and some other internal clocks
  */
 #define SCCR_MASK	SCCR_EBDF11
-#define CFG_SCCR	(SCCR_COM00   | SCCR_DFSYNC00 | SCCR_DFBRG00  | \
+#define CONFIG_SYS_SCCR	(SCCR_COM00   | SCCR_DFSYNC00 | SCCR_DFBRG00  | \
 			 SCCR_DFNL000 | SCCR_DFNH000  | SCCR_DFLCD000 | \
 			 SCCR_DFALCD00)
 
@@ -329,14 +329,14 @@
  *-----------------------------------------------------------------------
  *
  */
-#define CFG_PCMCIA_MEM_ADDR	(0xE0000000)
-#define CFG_PCMCIA_MEM_SIZE	( 64 << 20 )
-#define CFG_PCMCIA_DMA_ADDR	(0xE4000000)
-#define CFG_PCMCIA_DMA_SIZE	( 64 << 20 )
-#define CFG_PCMCIA_ATTRB_ADDR	(0xE8000000)
-#define CFG_PCMCIA_ATTRB_SIZE	( 64 << 20 )
-#define CFG_PCMCIA_IO_ADDR	(0xEC000000)
-#define CFG_PCMCIA_IO_SIZE	( 64 << 20 )
+#define CONFIG_SYS_PCMCIA_MEM_ADDR	(0xE0000000)
+#define CONFIG_SYS_PCMCIA_MEM_SIZE	( 64 << 20 )
+#define CONFIG_SYS_PCMCIA_DMA_ADDR	(0xE4000000)
+#define CONFIG_SYS_PCMCIA_DMA_SIZE	( 64 << 20 )
+#define CONFIG_SYS_PCMCIA_ATTRB_ADDR	(0xE8000000)
+#define CONFIG_SYS_PCMCIA_ATTRB_SIZE	( 64 << 20 )
+#define CONFIG_SYS_PCMCIA_IO_ADDR	(0xEC000000)
+#define CONFIG_SYS_PCMCIA_IO_SIZE	( 64 << 20 )
 
 /*-----------------------------------------------------------------------
  * IDE/ATA stuff (Supports IDE harddisk on PCMCIA Adapter)
@@ -349,28 +349,28 @@
 #undef	CONFIG_IDE_LED			/* LED	 for ide not supported	*/
 #undef	CONFIG_IDE_RESET		/* reset for ide not supported	*/
 
-#define CFG_IDE_MAXBUS		1	/* max. 1 IDE bus		*/
-#define CFG_IDE_MAXDEVICE	1	/* max. 1 drive per IDE bus	*/
+#define CONFIG_SYS_IDE_MAXBUS		1	/* max. 1 IDE bus		*/
+#define CONFIG_SYS_IDE_MAXDEVICE	1	/* max. 1 drive per IDE bus	*/
 
-#define CFG_ATA_IDE0_OFFSET	0x0000
+#define CONFIG_SYS_ATA_IDE0_OFFSET	0x0000
 
-#define CFG_ATA_BASE_ADDR	CFG_PCMCIA_MEM_ADDR
+#define CONFIG_SYS_ATA_BASE_ADDR	CONFIG_SYS_PCMCIA_MEM_ADDR
 
 /* Offset for data I/O			*/
-#define CFG_ATA_DATA_OFFSET	(CFG_PCMCIA_MEM_SIZE + 0x320)
+#define CONFIG_SYS_ATA_DATA_OFFSET	(CONFIG_SYS_PCMCIA_MEM_SIZE + 0x320)
 
 /* Offset for normal register accesses	*/
-#define CFG_ATA_REG_OFFSET	(2 * CFG_PCMCIA_MEM_SIZE + 0x320)
+#define CONFIG_SYS_ATA_REG_OFFSET	(2 * CONFIG_SYS_PCMCIA_MEM_SIZE + 0x320)
 
 /* Offset for alternate registers	*/
-#define CFG_ATA_ALT_OFFSET	0x0100
+#define CONFIG_SYS_ATA_ALT_OFFSET	0x0100
 
 /*-----------------------------------------------------------------------
  *
  *-----------------------------------------------------------------------
  *
  */
-#define CFG_DER 0
+#define CONFIG_SYS_DER 0
 
 /*
  * Init Memory Controller:
@@ -385,22 +385,22 @@
  * restrict access enough to keep SRAM working (if any)
  * but not too much to meddle with FLASH accesses
  */
-#define CFG_REMAP_OR_AM		0x80000000	/* OR addr mask */
-#define CFG_PRELIM_OR_AM	0xE0000000	/* OR addr mask */
+#define CONFIG_SYS_REMAP_OR_AM		0x80000000	/* OR addr mask */
+#define CONFIG_SYS_PRELIM_OR_AM	0xE0000000	/* OR addr mask */
 
 /*
  * FLASH timing: Default value of OR0 after reset
  */
-#define CFG_OR_TIMING_FLASH	(OR_CSNT_SAM | OR_ACS_MSK | OR_BI | \
+#define CONFIG_SYS_OR_TIMING_FLASH	(OR_CSNT_SAM | OR_ACS_MSK | OR_BI | \
 				 OR_SCY_6_CLK | OR_TRLX)
 
-#define CFG_OR0_REMAP	(CFG_REMAP_OR_AM  | CFG_OR_TIMING_FLASH)
-#define CFG_OR0_PRELIM	(CFG_PRELIM_OR_AM | CFG_OR_TIMING_FLASH)
-#define CFG_BR0_PRELIM	((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_V )
+#define CONFIG_SYS_OR0_REMAP	(CONFIG_SYS_REMAP_OR_AM  | CONFIG_SYS_OR_TIMING_FLASH)
+#define CONFIG_SYS_OR0_PRELIM	(CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_FLASH)
+#define CONFIG_SYS_BR0_PRELIM	((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_V )
 
-#define CFG_OR1_REMAP	CFG_OR0_REMAP
-#define CFG_OR1_PRELIM	CFG_OR0_PRELIM
-#define CFG_BR1_PRELIM	((FLASH_BASE1_PRELIM & BR_BA_MSK) | BR_V )
+#define CONFIG_SYS_OR1_REMAP	CONFIG_SYS_OR0_REMAP
+#define CONFIG_SYS_OR1_PRELIM	CONFIG_SYS_OR0_PRELIM
+#define CONFIG_SYS_BR1_PRELIM	((FLASH_BASE1_PRELIM & BR_BA_MSK) | BR_V )
 
 /*
  * BR2/3 and OR2/3 (SDRAM)
@@ -411,19 +411,19 @@
 #define SDRAM_MAX_SIZE		(256 << 20)	/* max 256 MB per bank	*/
 
 /* SDRAM timing: Multiplexed addresses, GPL5 output to GPL5_A (don't care)	*/
-#define CFG_OR_TIMING_SDRAM	0x00000A00
+#define CONFIG_SYS_OR_TIMING_SDRAM	0x00000A00
 
-#define CFG_OR2_PRELIM	(CFG_PRELIM_OR_AM | CFG_OR_TIMING_SDRAM )
-#define CFG_BR2_PRELIM	((SDRAM_BASE2_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
+#define CONFIG_SYS_OR2_PRELIM	(CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_SDRAM )
+#define CONFIG_SYS_BR2_PRELIM	((SDRAM_BASE2_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
 
 #ifndef CONFIG_CAN_DRIVER
-#define CFG_OR3_PRELIM	CFG_OR2_PRELIM
-#define CFG_BR3_PRELIM	((SDRAM_BASE3_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
+#define CONFIG_SYS_OR3_PRELIM	CONFIG_SYS_OR2_PRELIM
+#define CONFIG_SYS_BR3_PRELIM	((SDRAM_BASE3_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
 #else	/* CAN uses CS3#, so we can have only one SDRAM bank anyway */
-#define CFG_CAN_BASE		0xC0000000	/* CAN mapped at 0xC0000000	*/
-#define CFG_CAN_OR_AM		0xFFFF8000	/* 32 kB address mask		*/
-#define CFG_OR3_CAN		(CFG_CAN_OR_AM | OR_G5LA | OR_BI)
-#define CFG_BR3_CAN		((CFG_CAN_BASE & BR_BA_MSK) | \
+#define CONFIG_SYS_CAN_BASE		0xC0000000	/* CAN mapped at 0xC0000000	*/
+#define CONFIG_SYS_CAN_OR_AM		0xFFFF8000	/* 32 kB address mask		*/
+#define CONFIG_SYS_OR3_CAN		(CONFIG_SYS_CAN_OR_AM | OR_G5LA | OR_BI)
+#define CONFIG_SYS_BR3_CAN		((CONFIG_SYS_CAN_BASE & BR_BA_MSK) | \
 					BR_PS_8 | BR_MS_UPMB | BR_V )
 #endif	/* CONFIG_CAN_DRIVER */
 
@@ -434,48 +434,48 @@
  * 4	Number of refresh cycles per period
  * 64	Refresh cycle in ms per number of rows
  */
-#define CFG_PTA_PER_CLK	((4096 * 64 * 1000) / (4 * 64))
+#define CONFIG_SYS_PTA_PER_CLK	((4096 * 64 * 1000) / (4 * 64))
 
 /*
  * Periodic timer (MAMR[PTx]) for 4 * 7.8 us refresh (= 31.2 us per quad)
  *
  *                        CPUclock(MHz) * 31.2
- * CFG_MAMR_PTA = -----------------------------------     with DFBRG = 0
+ * CONFIG_SYS_MAMR_PTA = -----------------------------------     with DFBRG = 0
  *                2^(2*SCCR[DFBRG]) * MPTPR_PTP_DIV16
  *
- * CPU clock =  15 MHz:  CFG_MAMR_PTA =  29   ->  4 * 7.73 us
- * CPU clock =  50 MHz:  CFG_MAMR_PTA =  97   ->  4 * 7.76 us
- * CPU clock =  66 MHz:  CFG_MAMR_PTA = 128   ->  4 * 7.75 us
- * CPU clock = 133 MHz:  CFG_MAMR_PTA = 255   ->  4 * 7.67 us
+ * CPU clock =  15 MHz:  CONFIG_SYS_MAMR_PTA =  29   ->  4 * 7.73 us
+ * CPU clock =  50 MHz:  CONFIG_SYS_MAMR_PTA =  97   ->  4 * 7.76 us
+ * CPU clock =  66 MHz:  CONFIG_SYS_MAMR_PTA = 128   ->  4 * 7.75 us
+ * CPU clock = 133 MHz:  CONFIG_SYS_MAMR_PTA = 255   ->  4 * 7.67 us
  *
  * Value 97 is for 4 * 7.8 us at 50 MHz. So the refresh cycle requirement will
  * be met also in the default configuration, i.e. if environment variable
  * 'cpuclk' is not set.
  */
-#define CFG_MAMR_PTA		128
+#define CONFIG_SYS_MAMR_PTA		128
 
 /*
  * Memory Periodic Timer Prescaler Register (MPTPR) values.
  */
 /* 4 * 7.8 us refresh (= 31.2 us per quad) at 50 MHz and PTA = 97 */
-#define CFG_MPTPR_2BK_4K	MPTPR_PTP_DIV16
+#define CONFIG_SYS_MPTPR_2BK_4K	MPTPR_PTP_DIV16
 /* 4 * 3.9 us refresh (= 15.6 us per quad) at 50 MHz and PTA = 97 */
-#define CFG_MPTPR_2BK_8K	MPTPR_PTP_DIV8
+#define CONFIG_SYS_MPTPR_2BK_8K	MPTPR_PTP_DIV8
 
 /*
  * MAMR settings for SDRAM
  */
 
 /* 8 column SDRAM */
-#define CFG_MAMR_8COL	((CFG_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
+#define CONFIG_SYS_MAMR_8COL	((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
 			 MAMR_AMA_TYPE_0 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A11 |	\
 			 MAMR_RLFA_1X	 | MAMR_WLFA_1X	   | MAMR_TLFA_4X)
 /* 9 column SDRAM */
-#define CFG_MAMR_9COL	((CFG_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
+#define CONFIG_SYS_MAMR_9COL	((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
 			 MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 |	\
 			 MAMR_RLFA_1X	 | MAMR_WLFA_1X	   | MAMR_TLFA_4X)
 /* 10 column SDRAM */
-#define CFG_MAMR_10COL	((CFG_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
+#define CONFIG_SYS_MAMR_10COL	((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
 			 MAMR_AMA_TYPE_2 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A9  |	\
 			 MAMR_RLFA_1X	 | MAMR_WLFA_1X	   | MAMR_TLFA_4X)
 
@@ -496,7 +496,7 @@
 #define CONFIG_ETHER_ON_FEC2		/* ... for FEC2 */
 
 #if defined(CONFIG_CMD_MII)
-#define CFG_DISCOVER_PHY
+#define CONFIG_SYS_DISCOVER_PHY
 #define CONFIG_MII_INIT	1
 #endif
 
diff --git a/include/configs/Total5200.h b/include/configs/Total5200.h
index 25e98e249..75d1985ff 100644
--- a/include/configs/Total5200.h
+++ b/include/configs/Total5200.h
@@ -43,7 +43,7 @@
 #define CONFIG_MPC5xxx		1	/* This is an MPC5xxx CPU */
 #define CONFIG_TOTAL5200	1	/* ... on Total5200 board */
 
-#define CFG_MPC5XXX_CLKIN	33000000 /* ... running at 33.000000MHz */
+#define CONFIG_SYS_MPC5XXX_CLKIN	33000000 /* ... running at 33.000000MHz */
 
 #define BOOTFLAG_COLD		0x01	/* Normal Power-On: Boot from FLASH  */
 #define BOOTFLAG_WARM		0x02	/* Software reboot	     */
@@ -55,7 +55,7 @@
  */
 #define CONFIG_PSC_CONSOLE	3	/* console is on PSC3 */
 #define CONFIG_BAUDRATE		115200	/* ... at 115200 bps */
-#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
 
 /*
  * Video console
@@ -95,7 +95,7 @@
 #define CONFIG_NET_MULTI	1
 #define CONFIG_MII		1
 #define CONFIG_EEPRO100		1
-#define CFG_RX_ETH_BUFFER	8  /* use 8 rx buffer on eepro100  */
+#define CONFIG_SYS_RX_ETH_BUFFER	8  /* use 8 rx buffer on eepro100  */
 #define CONFIG_NS8382X		1
 
 #else	/* MGT5100 */
@@ -141,7 +141,7 @@
 
 
 #if (TEXT_BASE == 0xFE000000)		/* Boot low */
-#   define CFG_LOWBOOT		1
+#   define CONFIG_SYS_LOWBOOT		1
 #endif
 
 /*
@@ -180,89 +180,89 @@
 /*
  * IPB Bus clocking configuration.
  */
-#undef CFG_IPBCLK_EQUALS_XLBCLK		/* define for 133MHz speed */
+#undef CONFIG_SYS_IPBCLK_EQUALS_XLBCLK		/* define for 133MHz speed */
 #endif
 
 /*
  * I2C configuration
  */
 #define CONFIG_HARD_I2C		1	/* I2C with hardware support */
-#define CFG_I2C_MODULE		1	/* Select I2C module #1 or #2 */
+#define CONFIG_SYS_I2C_MODULE		1	/* Select I2C module #1 or #2 */
 
-#define CFG_I2C_SPEED		100000 /* 100 kHz */
-#define CFG_I2C_SLAVE		0x7F
+#define CONFIG_SYS_I2C_SPEED		100000 /* 100 kHz */
+#define CONFIG_SYS_I2C_SLAVE		0x7F
 
 /*
  * EEPROM configuration
  */
-#define CFG_I2C_EEPROM_ADDR		0x50	/* 1010000x */
-#define CFG_I2C_EEPROM_ADDR_LEN		1
-#define CFG_EEPROM_PAGE_WRITE_BITS	3
-#define CFG_EEPROM_PAGE_WRITE_DELAY_MS	70
+#define CONFIG_SYS_I2C_EEPROM_ADDR		0x50	/* 1010000x */
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN		1
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS	3
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	70
 
 /*
  * Flash configuration
  */
-#define CFG_FLASH_CFI		1	/* Flash is CFI conformant */
+#define CONFIG_SYS_FLASH_CFI		1	/* Flash is CFI conformant */
 #define CONFIG_FLASH_CFI_DRIVER	1	/* Use the common driver */
 #if CONFIG_TOTAL5200_REV==2
-#   define CFG_MAX_FLASH_BANKS	3	/* max num of flash banks */
-#   define CFG_FLASH_BANKS_LIST { CFG_CS5_START, CFG_CS4_START, CFG_BOOTCS_START }
+#   define CONFIG_SYS_MAX_FLASH_BANKS	3	/* max num of flash banks */
+#   define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_CS5_START, CONFIG_SYS_CS4_START, CONFIG_SYS_BOOTCS_START }
 #else
-#   define CFG_MAX_FLASH_BANKS	1	/* max num of flash banks  */
-#   define CFG_FLASH_BANKS_LIST { CFG_BOOTCS_START }
+#   define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max num of flash banks  */
+#   define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_BOOTCS_START }
 #endif
-#define CFG_FLASH_EMPTY_INFO
-#define CFG_MAX_FLASH_SECT	128	/* max num of sects on one chip */
+#define CONFIG_SYS_FLASH_EMPTY_INFO
+#define CONFIG_SYS_MAX_FLASH_SECT	128	/* max num of sects on one chip */
 
 #if CONFIG_TOTAL5200_REV==1
-#   define CFG_FLASH_BASE	0xFE000000
-#   define CFG_FLASH_SIZE	0x02000000
+#   define CONFIG_SYS_FLASH_BASE	0xFE000000
+#   define CONFIG_SYS_FLASH_SIZE	0x02000000
 #elif CONFIG_TOTAL5200_REV==2
-#   define CFG_FLASH_BASE	0xFA000000
-#   define CFG_FLASH_SIZE	0x06000000
+#   define CONFIG_SYS_FLASH_BASE	0xFA000000
+#   define CONFIG_SYS_FLASH_SIZE	0x06000000
 #endif /* CONFIG_TOTAL5200_REV */
 
-#if defined(CFG_LOWBOOT)
-#   define CFG_ENV_ADDR		0xFE040000
-#else	/* CFG_LOWBOOT */
-#   define CFG_ENV_ADDR		0xFFF40000
-#endif	/* CFG_LOWBOOT */
+#if defined(CONFIG_SYS_LOWBOOT)
+#   define CONFIG_ENV_ADDR		0xFE040000
+#else	/* CONFIG_SYS_LOWBOOT */
+#   define CONFIG_ENV_ADDR		0xFFF40000
+#endif	/* CONFIG_SYS_LOWBOOT */
 
 /*
  * Environment settings
  */
-#define CFG_ENV_IS_IN_FLASH	1
-#define CFG_ENV_SIZE		0x40000
-#define CFG_ENV_SECT_SIZE	0x40000
+#define CONFIG_ENV_IS_IN_FLASH	1
+#define CONFIG_ENV_SIZE		0x40000
+#define CONFIG_ENV_SECT_SIZE	0x40000
 #define CONFIG_ENV_OVERWRITE	1
 
 /*
  * Memory map
  */
-#define CFG_SDRAM_BASE		0x00000000
-#define CFG_DEFAULT_MBAR	0x80000000
-#define CFG_MBAR		0xF0000000	/*   64 kB */
-#define CFG_FPGA_BASE		0xF0010000	/*   64 kB */
-#define CFG_CPLD_BASE		0xF0020000	/*   64 kB */
-#define CFG_LCD_BASE		0xF1000000	/* 4096 kB */
+#define CONFIG_SYS_SDRAM_BASE		0x00000000
+#define CONFIG_SYS_DEFAULT_MBAR	0x80000000
+#define CONFIG_SYS_MBAR		0xF0000000	/*   64 kB */
+#define CONFIG_SYS_FPGA_BASE		0xF0010000	/*   64 kB */
+#define CONFIG_SYS_CPLD_BASE		0xF0020000	/*   64 kB */
+#define CONFIG_SYS_LCD_BASE		0xF1000000	/* 4096 kB */
 
 /* Use SRAM until RAM will be available */
-#define CFG_INIT_RAM_ADDR	MPC5XXX_SRAM
-#define CFG_INIT_RAM_END	MPC5XXX_SRAM_SIZE	/* End of used area in DPRAM */
+#define CONFIG_SYS_INIT_RAM_ADDR	MPC5XXX_SRAM
+#define CONFIG_SYS_INIT_RAM_END	MPC5XXX_SRAM_SIZE	/* End of used area in DPRAM */
 
-#define CFG_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
-#define CFG_MONITOR_BASE    TEXT_BASE
-#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
-#   define CFG_RAMBOOT		1
+#define CONFIG_SYS_MONITOR_BASE    TEXT_BASE
+#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
+#   define CONFIG_SYS_RAMBOOT		1
 #endif
 
-#define CFG_MONITOR_LEN		(192 << 10)	/* Reserve 192 kB for Monitor	*/
-#define CFG_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/
-#define CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
+#define CONFIG_SYS_MONITOR_LEN		(192 << 10)	/* Reserve 192 kB for Monitor	*/
+#define CONFIG_SYS_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/
+#define CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
 
 /*
  * Ethernet configuration
@@ -293,32 +293,32 @@
  * PSC1:  reset default, changed in AC'97 driver                 000
  *
  */
-#define CFG_GPS_PORT_CONFIG	0x00000C10
+#define CONFIG_SYS_GPS_PORT_CONFIG	0x00000C10
 
 /*
  * Miscellaneous configurable options
  */
-#define CFG_LONGHELP			/* undef to save memory	    */
-#define CFG_PROMPT		"=> "	/* Monitor Command Prompt   */
+#define CONFIG_SYS_LONGHELP			/* undef to save memory	    */
+#define CONFIG_SYS_PROMPT		"=> "	/* Monitor Command Prompt   */
 #if defined(CONFIG_CMD_KGDB)
-#define CFG_CBSIZE		1024	/* Console I/O Buffer Size  */
+#define CONFIG_SYS_CBSIZE		1024	/* Console I/O Buffer Size  */
 #else
-#define CFG_CBSIZE		256	/* Console I/O Buffer Size  */
+#define CONFIG_SYS_CBSIZE		256	/* Console I/O Buffer Size  */
 #endif
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16)	/* Print Buffer Size */
-#define CFG_MAXARGS		16		/* max number of command args	*/
-#define CFG_BARGSIZE		CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)	/* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS		16		/* max number of command args	*/
+#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
 
-#define CFG_MEMTEST_START	0x00100000	/* memtest works on */
-#define CFG_MEMTEST_END		0x00f00000	/* 1 ... 15 MB in DRAM	*/
+#define CONFIG_SYS_MEMTEST_START	0x00100000	/* memtest works on */
+#define CONFIG_SYS_MEMTEST_END		0x00f00000	/* 1 ... 15 MB in DRAM	*/
 
-#define CFG_LOAD_ADDR		0x100000	/* default load address */
+#define CONFIG_SYS_LOAD_ADDR		0x100000	/* default load address */
 
-#define CFG_HZ			1000	/* decrementer freq: 1 ms ticks */
+#define CONFIG_SYS_HZ			1000	/* decrementer freq: 1 ms ticks */
 
-#define CFG_CACHELINE_SIZE	32	/* For MPC5xxx CPUs */
+#define CONFIG_SYS_CACHELINE_SIZE	32	/* For MPC5xxx CPUs */
 #if defined(CONFIG_CMD_KGDB)
-#  define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value */
+#  define CONFIG_SYS_CACHELINE_SHIFT	5	/* log base 2 of the above value */
 #endif
 
 
@@ -326,11 +326,11 @@
  * Various low-level settings
  */
 #if defined(CONFIG_MPC5200)
-#define CFG_HID0_INIT		HID0_ICE | HID0_ICFI
-#define CFG_HID0_FINAL		HID0_ICE
+#define CONFIG_SYS_HID0_INIT		HID0_ICE | HID0_ICFI
+#define CONFIG_SYS_HID0_FINAL		HID0_ICE
 #else
-#define CFG_HID0_INIT		0
-#define CFG_HID0_FINAL		0
+#define CONFIG_SYS_HID0_INIT		0
+#define CONFIG_SYS_HID0_FINAL		0
 #endif
 
 #if defined (CONFIG_MGT5100)
@@ -338,43 +338,43 @@
 #endif
 
 #if CONFIG_TOTAL5200_REV==1
-#   define CFG_BOOTCS_START	CFG_FLASH_BASE
-#   define CFG_BOOTCS_SIZE	0x02000000	/* 32 MB */
-#   define CFG_BOOTCS_CFG	0x0004DF00	/* 4WS, MX, AL, CE, AS_25, DS_32 */
-#   define CFG_CS0_START	CFG_FLASH_BASE
-#   define CFG_CS0_SIZE		0x02000000	/* 32 MB */
+#   define CONFIG_SYS_BOOTCS_START	CONFIG_SYS_FLASH_BASE
+#   define CONFIG_SYS_BOOTCS_SIZE	0x02000000	/* 32 MB */
+#   define CONFIG_SYS_BOOTCS_CFG	0x0004DF00	/* 4WS, MX, AL, CE, AS_25, DS_32 */
+#   define CONFIG_SYS_CS0_START	CONFIG_SYS_FLASH_BASE
+#   define CONFIG_SYS_CS0_SIZE		0x02000000	/* 32 MB */
 #else
-#   define CFG_BOOTCS_START	(CFG_CS4_START + CFG_CS4_SIZE)
-#   define CFG_BOOTCS_SIZE	0x02000000	/* 32 MB */
-#   define CFG_BOOTCS_CFG	0x0004DF00	/* 4WS, MX, AL, CE, AS_25, DS_32 */
-#   define CFG_CS4_START	(CFG_CS5_START + CFG_CS5_SIZE)
-#   define CFG_CS4_SIZE		0x02000000	/* 32 MB */
-#   define CFG_CS4_CFG		0x0004DF00	/* 4WS, MX, AL, CE, AS_25, DS_32 */
-#   define CFG_CS5_START	CFG_FLASH_BASE
-#   define CFG_CS5_SIZE		0x02000000	/* 32 MB */
-#   define CFG_CS5_CFG		0x0004DF00	/* 4WS, MX, AL, CE, AS_25, DS_32 */
+#   define CONFIG_SYS_BOOTCS_START	(CONFIG_SYS_CS4_START + CONFIG_SYS_CS4_SIZE)
+#   define CONFIG_SYS_BOOTCS_SIZE	0x02000000	/* 32 MB */
+#   define CONFIG_SYS_BOOTCS_CFG	0x0004DF00	/* 4WS, MX, AL, CE, AS_25, DS_32 */
+#   define CONFIG_SYS_CS4_START	(CONFIG_SYS_CS5_START + CONFIG_SYS_CS5_SIZE)
+#   define CONFIG_SYS_CS4_SIZE		0x02000000	/* 32 MB */
+#   define CONFIG_SYS_CS4_CFG		0x0004DF00	/* 4WS, MX, AL, CE, AS_25, DS_32 */
+#   define CONFIG_SYS_CS5_START	CONFIG_SYS_FLASH_BASE
+#   define CONFIG_SYS_CS5_SIZE		0x02000000	/* 32 MB */
+#   define CONFIG_SYS_CS5_CFG		0x0004DF00	/* 4WS, MX, AL, CE, AS_25, DS_32 */
 #endif
 
-#define CFG_CS1_START		CFG_FPGA_BASE
-#define CFG_CS1_SIZE		0x00010000	/* 64 kB */
-#define CFG_CS1_CFG		0x0019FF00	/* 25WS, MX, AL, AA, CE, AS_25, DS_32 */
+#define CONFIG_SYS_CS1_START		CONFIG_SYS_FPGA_BASE
+#define CONFIG_SYS_CS1_SIZE		0x00010000	/* 64 kB */
+#define CONFIG_SYS_CS1_CFG		0x0019FF00	/* 25WS, MX, AL, AA, CE, AS_25, DS_32 */
 
-#define CFG_CS2_START		CFG_LCD_BASE
-#define CFG_CS2_SIZE		0x00400000	/* 4096 kB */
-#define CFG_CS2_CFG		0x0032FD0C	/* 50WS, MX, AL, AA, CE, AS_25, DS_16, endian swapping */
+#define CONFIG_SYS_CS2_START		CONFIG_SYS_LCD_BASE
+#define CONFIG_SYS_CS2_SIZE		0x00400000	/* 4096 kB */
+#define CONFIG_SYS_CS2_CFG		0x0032FD0C	/* 50WS, MX, AL, AA, CE, AS_25, DS_16, endian swapping */
 
 #if CONFIG_TOTAL5200_REV==1
-#   define CFG_CS3_START	CFG_CPLD_BASE
-#   define CFG_CS3_SIZE		0x00010000	/* 64 kB */
-#   define CFG_CS3_CFG		0x000ADF00	/* 10WS, MX, AL, CE, AS_25, DS_32 */
+#   define CONFIG_SYS_CS3_START	CONFIG_SYS_CPLD_BASE
+#   define CONFIG_SYS_CS3_SIZE		0x00010000	/* 64 kB */
+#   define CONFIG_SYS_CS3_CFG		0x000ADF00	/* 10WS, MX, AL, CE, AS_25, DS_32 */
 #else
-#   define CFG_CS3_START	CFG_CPLD_BASE
-#   define CFG_CS3_SIZE		0x00010000	/* 64 kB */
-#   define CFG_CS3_CFG		0x000AD800	/* 10WS, MX, AL, CE, AS_24, DS_8 */
+#   define CONFIG_SYS_CS3_START	CONFIG_SYS_CPLD_BASE
+#   define CONFIG_SYS_CS3_SIZE		0x00010000	/* 64 kB */
+#   define CONFIG_SYS_CS3_CFG		0x000AD800	/* 10WS, MX, AL, CE, AS_24, DS_8 */
 #endif
 
-#define CFG_CS_BURST		0x00000000
-#define CFG_CS_DEADCYCLE	0x33333333
+#define CONFIG_SYS_CS_BURST		0x00000000
+#define CONFIG_SYS_CS_DEADCYCLE	0x33333333
 
 /*-----------------------------------------------------------------------
  * USB stuff
@@ -396,23 +396,23 @@
 #define	CONFIG_IDE_RESET		/* reset for ide supported	*/
 #define CONFIG_IDE_PREINIT
 
-#define CFG_IDE_MAXBUS		1	/* max. 1 IDE bus		*/
-#define CFG_IDE_MAXDEVICE	1	/* max. 1 drive per IDE bus	*/
+#define CONFIG_SYS_IDE_MAXBUS		1	/* max. 1 IDE bus		*/
+#define CONFIG_SYS_IDE_MAXDEVICE	1	/* max. 1 drive per IDE bus	*/
 
-#define CFG_ATA_IDE0_OFFSET	0x0000
+#define CONFIG_SYS_ATA_IDE0_OFFSET	0x0000
 
-#define CFG_ATA_BASE_ADDR	MPC5XXX_ATA
+#define CONFIG_SYS_ATA_BASE_ADDR	MPC5XXX_ATA
 
 /* Offset for data I/O			*/
-#define CFG_ATA_DATA_OFFSET	(0x0060)
+#define CONFIG_SYS_ATA_DATA_OFFSET	(0x0060)
 
 /* Offset for normal register accesses	*/
-#define CFG_ATA_REG_OFFSET	(CFG_ATA_DATA_OFFSET)
+#define CONFIG_SYS_ATA_REG_OFFSET	(CONFIG_SYS_ATA_DATA_OFFSET)
 
 /* Offset for alternate registers	*/
-#define CFG_ATA_ALT_OFFSET	(0x005C)
+#define CONFIG_SYS_ATA_ALT_OFFSET	(0x005C)
 
 /* Interval between registers                                                */
-#define CFG_ATA_STRIDE          4
+#define CONFIG_SYS_ATA_STRIDE          4
 
 #endif /* __CONFIG_H */
diff --git a/include/configs/VCMA9.h b/include/configs/VCMA9.h
index 02cabb2fb..0bc2f6889 100644
--- a/include/configs/VCMA9.h
+++ b/include/configs/VCMA9.h
@@ -76,35 +76,35 @@
 #define CONFIG_CMD_BSP
 
 
-#define CFG_HUSH_PARSER
-#define CFG_PROMPT_HUSH_PS2 "> "
+#define CONFIG_SYS_HUSH_PARSER
+#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
 /***********************************************************
  * I2C stuff:
  * the MPL VCMA9 is equipped with an ATMEL 24C256 EEPROM at
  * address 0x50 with 16bit addressing
  ***********************************************************/
 #define CONFIG_HARD_I2C			/* I2C with hardware support */
-#define CFG_I2C_SPEED		100000	/* I2C speed */
-#define CFG_I2C_SLAVE		0x7F	/* I2C slave addr */
+#define CONFIG_SYS_I2C_SPEED		100000	/* I2C speed */
+#define CONFIG_SYS_I2C_SLAVE		0x7F	/* I2C slave addr */
 
-#define CFG_I2C_EEPROM_ADDR	0x50
-#define CFG_I2C_EEPROM_ADDR_LEN	2
-#define CFG_ENV_IS_IN_EEPROM	1	/* use EEPROM for environment vars */
-#define CFG_ENV_OFFSET		0x000	/* environment starts at offset 0 */
-#define CFG_ENV_SIZE		0x800	/* 2KB should be more than enough */
+#define CONFIG_SYS_I2C_EEPROM_ADDR	0x50
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN	2
+#define CONFIG_ENV_IS_IN_EEPROM	1	/* use EEPROM for environment vars */
+#define CONFIG_ENV_OFFSET		0x000	/* environment starts at offset 0 */
+#define CONFIG_ENV_SIZE		0x800	/* 2KB should be more than enough */
 
-#undef CFG_I2C_EEPROM_ADDR_OVERFLOW
-#define CFG_EEPROM_PAGE_WRITE_BITS 6	/* 64 bytes page write mode on 24C256 */
-#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10
+#undef CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 6	/* 64 bytes page write mode on 24C256 */
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10
 
 /*
  * Size of malloc() pool
  */
-/*#define CONFIG_MALLOC_SIZE	(CFG_ENV_SIZE + 128*1024)*/
-#define CFG_GBL_DATA_SIZE	128		/* size in bytes reserved for initial data */
+/*#define CONFIG_MALLOC_SIZE	(CONFIG_ENV_SIZE + 128*1024)*/
+#define CONFIG_SYS_GBL_DATA_SIZE	128		/* size in bytes reserved for initial data */
 
-#define CFG_MONITOR_LEN		(256 * 1024)
-#define CFG_MALLOC_LEN		(1024 * 1024)	/* BUNZIP2 needs a lot of RAM */
+#define CONFIG_SYS_MONITOR_LEN		(256 * 1024)
+#define CONFIG_SYS_MALLOC_LEN		(1024 * 1024)	/* BUNZIP2 needs a lot of RAM */
 
 /*
  * Hardware drivers
@@ -129,7 +129,7 @@
 #define CONFIG_DOS_PARTITION	1
 
 /* Enable needed helper functions */
-#define CFG_DEVICE_DEREGISTER		/* needs device_deregister */
+#define CONFIG_SYS_DEVICE_DEREGISTER		/* needs device_deregister */
 
 /************************************************************
  * RTC
@@ -160,28 +160,28 @@
 /*
  * Miscellaneous configurable options
  */
-#define	CFG_LONGHELP				/* undef to save memory		*/
-#define	CFG_PROMPT		"VCMA9 # "	/* Monitor Command Prompt	*/
-#define	CFG_CBSIZE		256		/* Console I/O Buffer Size	*/
-#define	CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define	CFG_MAXARGS		16		/* max number of command args	*/
-#define CFG_BARGSIZE		CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+#define	CONFIG_SYS_LONGHELP				/* undef to save memory		*/
+#define	CONFIG_SYS_PROMPT		"VCMA9 # "	/* Monitor Command Prompt	*/
+#define	CONFIG_SYS_CBSIZE		256		/* Console I/O Buffer Size	*/
+#define	CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define	CONFIG_SYS_MAXARGS		16		/* max number of command args	*/
+#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
 
-#define CFG_MEMTEST_START	0x30000000	/* memtest works on	*/
-#define CFG_MEMTEST_END		0x30F80000	/* 15.5 MB in DRAM	*/
+#define CONFIG_SYS_MEMTEST_START	0x30000000	/* memtest works on	*/
+#define CONFIG_SYS_MEMTEST_END		0x30F80000	/* 15.5 MB in DRAM	*/
 
-#define CFG_ALT_MEMTEST
-#define	CFG_LOAD_ADDR		0x30800000	/* default load address	*/
+#define CONFIG_SYS_ALT_MEMTEST
+#define	CONFIG_SYS_LOAD_ADDR		0x30800000	/* default load address	*/
 
 
-#undef  CFG_CLKS_IN_HZ		/* everything, incl board info, in Hz */
+#undef  CONFIG_SYS_CLKS_IN_HZ		/* everything, incl board info, in Hz */
 
 /* we configure PWM Timer 4 to 1us ~ 1MHz */
-/*#define	CFG_HZ			1000000 */
-#define	CFG_HZ			1562500
+/*#define	CONFIG_SYS_HZ			1000000 */
+#define	CONFIG_SYS_HZ			1562500
 
 /* valid baudrates */
-#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
 
 /* support BZIP2 compression */
 #define CONFIG_BZIP2		1
@@ -211,7 +211,7 @@
 #define PHYS_SDRAM_1		0x30000000 /* SDRAM Bank #1 */
 #define PHYS_FLASH_1		0x00000000 /* Flash Bank #1 */
 
-#define CFG_FLASH_BASE		PHYS_FLASH_1
+#define CONFIG_SYS_FLASH_BASE		PHYS_FLASH_1
 
 /*-----------------------------------------------------------------------
  * FLASH and environment organization
@@ -222,30 +222,30 @@
 #define CONFIG_AMD_LV800	1	/* uncomment this if you have a LV800 flash */
 #endif
 
-#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks */
+#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks */
 #ifdef CONFIG_AMD_LV800
 #define PHYS_FLASH_SIZE		0x00100000 /* 1MB */
-#define CFG_MAX_FLASH_SECT	(19)	/* max number of sectors on one chip */
-#define CFG_ENV_ADDR		(CFG_FLASH_BASE + 0x0F0000) /* addr of environment */
+#define CONFIG_SYS_MAX_FLASH_SECT	(19)	/* max number of sectors on one chip */
+#define CONFIG_ENV_ADDR		(CONFIG_SYS_FLASH_BASE + 0x0F0000) /* addr of environment */
 #endif
 #ifdef CONFIG_AMD_LV400
 #define PHYS_FLASH_SIZE		0x00080000 /* 512KB */
-#define CFG_MAX_FLASH_SECT	(11)	/* max number of sectors on one chip */
-#define CFG_ENV_ADDR		(CFG_FLASH_BASE + 0x070000) /* addr of environment */
+#define CONFIG_SYS_MAX_FLASH_SECT	(11)	/* max number of sectors on one chip */
+#define CONFIG_ENV_ADDR		(CONFIG_SYS_FLASH_BASE + 0x070000) /* addr of environment */
 #endif
 
 /* timeout values are in ticks */
-#define CFG_FLASH_ERASE_TOUT	(5*CFG_HZ) /* Timeout for Flash Erase */
-#define CFG_FLASH_WRITE_TOUT	(5*CFG_HZ) /* Timeout for Flash Write */
+#define CONFIG_SYS_FLASH_ERASE_TOUT	(5*CONFIG_SYS_HZ) /* Timeout for Flash Erase */
+#define CONFIG_SYS_FLASH_WRITE_TOUT	(5*CONFIG_SYS_HZ) /* Timeout for Flash Write */
 
 #if 0
-#define	CFG_ENV_IS_IN_FLASH	1
-#define CFG_ENV_SIZE		0x10000	/* Total Size of Environment Sector */
+#define	CONFIG_ENV_IS_IN_FLASH	1
+#define CONFIG_ENV_SIZE		0x10000	/* Total Size of Environment Sector */
 #endif
 
 
-#define CFG_JFFS2_FIRST_BANK	0
-#define CFG_JFFS2_NUM_BANKS	1
+#define CONFIG_SYS_JFFS2_FIRST_BANK	0
+#define CONFIG_SYS_JFFS2_NUM_BANKS	1
 
 #define MULTI_PURPOSE_SOCKET_ADDR 0x08000000
 
@@ -255,7 +255,7 @@
 #if defined(CONFIG_CMD_NAND)
 
 #define CONFIG_NAND_LEGACY
-#define CFG_MAX_NAND_DEVICE	1	/* Max number of NAND devices		*/
+#define CONFIG_SYS_MAX_NAND_DEVICE	1	/* Max number of NAND devices		*/
 #define SECTORSIZE 512
 
 #define ADDR_COLUMN 1
diff --git a/include/configs/VOH405.h b/include/configs/VOH405.h
index 3ca928ec9..10ef620d8 100644
--- a/include/configs/VOH405.h
+++ b/include/configs/VOH405.h
@@ -50,11 +50,12 @@
 
 #define CONFIG_PREBOOT                  /* enable preboot variable      */
 
-#define CFG_LOADS_BAUD_CHANGE	1	/* allow baudrate change	*/
+#define CONFIG_SYS_LOADS_BAUD_CHANGE	1	/* allow baudrate change	*/
 
 #define CONFIG_NET_MULTI	1
 #undef  CONFIG_HAS_ETH1
 
+#define CONFIG_PPC4xx_EMAC
 #define CONFIG_MII		1	/* MII PHY management		*/
 #define CONFIG_PHY_ADDR		0	/* PHY address			*/
 #define CONFIG_LXT971_NO_SLEEP  1       /* disable sleep mode in LXT971 */
@@ -99,76 +100,76 @@
 #undef	CONFIG_WATCHDOG			/* watchdog disabled		*/
 
 #define CONFIG_RTC_MC146818		/* DS1685 is MC146818 compatible*/
-#define CFG_RTC_REG_BASE_ADDR	 0xF0000500 /* RTC Base Address		*/
+#define CONFIG_SYS_RTC_REG_BASE_ADDR	 0xF0000500 /* RTC Base Address		*/
 
 #define CONFIG_SDRAM_BANK0	1	/* init onboard SDRAM bank 0	*/
 
 /*
  * Miscellaneous configurable options
  */
-#define CFG_LONGHELP			/* undef to save memory		*/
-#define CFG_PROMPT	"=> "		/* Monitor Command Prompt	*/
+#define CONFIG_SYS_LONGHELP			/* undef to save memory		*/
+#define CONFIG_SYS_PROMPT	"=> "		/* Monitor Command Prompt	*/
 
-#undef	CFG_HUSH_PARSER			/* use "hush" command parser	*/
-#ifdef	CFG_HUSH_PARSER
-#define CFG_PROMPT_HUSH_PS2	"> "
+#undef	CONFIG_SYS_HUSH_PARSER			/* use "hush" command parser	*/
+#ifdef	CONFIG_SYS_HUSH_PARSER
+#define CONFIG_SYS_PROMPT_HUSH_PS2	"> "
 #endif
 
 #if defined(CONFIG_CMD_KGDB)
-#define CFG_CBSIZE	1024		/* Console I/O Buffer Size	*/
+#define CONFIG_SYS_CBSIZE	1024		/* Console I/O Buffer Size	*/
 #else
-#define CFG_CBSIZE	256		/* Console I/O Buffer Size	*/
+#define CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size	*/
 #endif
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define CFG_MAXARGS	16		/* max number of command args	*/
-#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS	16		/* max number of command args	*/
+#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
 
-#define CFG_DEVICE_NULLDEV	1	/* include nulldev device	*/
+#define CONFIG_SYS_DEVICE_NULLDEV	1	/* include nulldev device	*/
 
-#define CFG_CONSOLE_INFO_QUIET	1	/* don't print console @ startup*/
+#define CONFIG_SYS_CONSOLE_INFO_QUIET	1	/* don't print console @ startup*/
 
 #define CONFIG_AUTO_COMPLETE	1       /* add autocompletion support   */
 
-#define CFG_MEMTEST_START	0x0400000	/* memtest works on	*/
-#define CFG_MEMTEST_END		0x0C00000	/* 4 ... 12 MB in DRAM	*/
+#define CONFIG_SYS_MEMTEST_START	0x0400000	/* memtest works on	*/
+#define CONFIG_SYS_MEMTEST_END		0x0C00000	/* 4 ... 12 MB in DRAM	*/
 
-#undef  CFG_EXT_SERIAL_CLOCK           /* no external serial clock used */
-#define CFG_IGNORE_405_UART_ERRATA_59   /* ignore ppc405gp errata #59   */
-#define CFG_BASE_BAUD       691200
+#undef  CONFIG_SYS_EXT_SERIAL_CLOCK           /* no external serial clock used */
+#define CONFIG_SYS_IGNORE_405_UART_ERRATA_59   /* ignore ppc405gp errata #59   */
+#define CONFIG_SYS_BASE_BAUD       691200
 #define CONFIG_UART1_CONSOLE            /* define for uart1 as console  */
 
 /* The following table includes the supported baudrates */
-#define CFG_BAUDRATE_TABLE	\
+#define CONFIG_SYS_BAUDRATE_TABLE	\
 	{ 300, 600, 1200, 2400, 4800, 9600, 19200, 38400,     \
 	 57600, 115200, 230400, 460800, 921600 }
 
-#define CFG_LOAD_ADDR	0x100000	/* default load address */
-#define CFG_EXTBDINFO	1		/* To use extended board_into (bd_t) */
+#define CONFIG_SYS_LOAD_ADDR	0x100000	/* default load address */
+#define CONFIG_SYS_EXTBDINFO	1		/* To use extended board_into (bd_t) */
 
-#define CFG_HZ		1000		/* decrementer freq: 1 ms ticks */
+#define CONFIG_SYS_HZ		1000		/* decrementer freq: 1 ms ticks */
 
 #define CONFIG_ZERO_BOOTDELAY_CHECK	/* check for keypress on bootdelay==0 */
 
 #define CONFIG_VERSION_VARIABLE 1	/* include version env variable */
 
-#define CFG_RX_ETH_BUFFER	16	/* use 16 rx buffer on 405 emac */
+#define CONFIG_SYS_RX_ETH_BUFFER	16	/* use 16 rx buffer on 405 emac */
 
 /*-----------------------------------------------------------------------
  * NAND-FLASH stuff
  *-----------------------------------------------------------------------
  */
-#define CFG_NAND_BASE_LIST	{ CFG_NAND_BASE }
+#define CONFIG_SYS_NAND_BASE_LIST	{ CONFIG_SYS_NAND_BASE }
 #define NAND_MAX_CHIPS          1
-#define CFG_MAX_NAND_DEVICE	1         /* Max number of NAND devices */
+#define CONFIG_SYS_MAX_NAND_DEVICE	1         /* Max number of NAND devices */
 #define NAND_BIG_DELAY_US	25
 
-#define CFG_NAND_CE             (0x80000000 >> 1)   /* our CE is GPIO1  */
-#define CFG_NAND_RDY            (0x80000000 >> 4)   /* our RDY is GPIO4 */
-#define CFG_NAND_CLE            (0x80000000 >> 2)   /* our CLE is GPIO2 */
-#define CFG_NAND_ALE            (0x80000000 >> 3)   /* our ALE is GPIO3 */
+#define CONFIG_SYS_NAND_CE             (0x80000000 >> 1)   /* our CE is GPIO1  */
+#define CONFIG_SYS_NAND_RDY            (0x80000000 >> 4)   /* our RDY is GPIO4 */
+#define CONFIG_SYS_NAND_CLE            (0x80000000 >> 2)   /* our CLE is GPIO2 */
+#define CONFIG_SYS_NAND_ALE            (0x80000000 >> 3)   /* our ALE is GPIO3 */
 
-#define CFG_NAND_SKIP_BAD_DOT_I 1       /* ".i" read skips bad blocks   */
-#define CFG_NAND_QUIET          1
+#define CONFIG_SYS_NAND_SKIP_BAD_DOT_I 1       /* ".i" read skips bad blocks   */
+#define CONFIG_SYS_NAND_QUIET          1
 
 /*-----------------------------------------------------------------------
  * PCI stuff
@@ -187,15 +188,15 @@
 
 #define CONFIG_PCI_CONFIG_HOST_BRIDGE 1 /* don't skip host bridge config*/
 
-#define CFG_PCI_SUBSYS_VENDORID 0x12FE  /* PCI Vendor ID: esd gmbh      */
-#define CFG_PCI_SUBSYS_DEVICEID 0x0405  /* PCI Device ID: CPCI-405      */
-#define CFG_PCI_CLASSCODE       0x0b20  /* PCI Class Code: Processor/PPC*/
-#define CFG_PCI_PTM1LA  0x00000000      /* point to sdram               */
-#define CFG_PCI_PTM1MS  0xfc000001      /* 64MB, enable hard-wired to 1 */
-#define CFG_PCI_PTM1PCI 0x00000000      /* Host: use this pci address   */
-#define CFG_PCI_PTM2LA  0xffc00000      /* point to flash               */
-#define CFG_PCI_PTM2MS  0xffc00001      /* 4MB, enable                  */
-#define CFG_PCI_PTM2PCI 0x04000000      /* Host: use this pci address   */
+#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x12FE  /* PCI Vendor ID: esd gmbh      */
+#define CONFIG_SYS_PCI_SUBSYS_DEVICEID 0x0405  /* PCI Device ID: CPCI-405      */
+#define CONFIG_SYS_PCI_CLASSCODE       0x0b20  /* PCI Class Code: Processor/PPC*/
+#define CONFIG_SYS_PCI_PTM1LA  0x00000000      /* point to sdram               */
+#define CONFIG_SYS_PCI_PTM1MS  0xfc000001      /* 64MB, enable hard-wired to 1 */
+#define CONFIG_SYS_PCI_PTM1PCI 0x00000000      /* Host: use this pci address   */
+#define CONFIG_SYS_PCI_PTM2LA  0xffc00000      /* point to flash               */
+#define CONFIG_SYS_PCI_PTM2MS  0xffc00001      /* 4MB, enable                  */
+#define CONFIG_SYS_PCI_PTM2PCI 0x04000000      /* Host: use this pci address   */
 
 /*-----------------------------------------------------------------------
  * IDE/ATA stuff
@@ -205,94 +206,93 @@
 #undef	CONFIG_IDE_LED			/* no led for ide supported	*/
 #define CONFIG_IDE_RESET	1	/* reset for ide supported	*/
 
-#define CFG_IDE_MAXBUS		2		/* max. 2 IDE busses	*/
-#define CFG_IDE_MAXDEVICE	(CFG_IDE_MAXBUS*2) /* max. 2 drives per IDE bus */
+#define CONFIG_SYS_IDE_MAXBUS		2		/* max. 2 IDE busses	*/
+#define CONFIG_SYS_IDE_MAXDEVICE	(CONFIG_SYS_IDE_MAXBUS*2) /* max. 2 drives per IDE bus */
 
-#define CFG_ATA_BASE_ADDR	0xF0100000
-#define CFG_ATA_IDE0_OFFSET	0x0000
-#define CFG_ATA_IDE1_OFFSET	0x0010
+#define CONFIG_SYS_ATA_BASE_ADDR	0xF0100000
+#define CONFIG_SYS_ATA_IDE0_OFFSET	0x0000
+#define CONFIG_SYS_ATA_IDE1_OFFSET	0x0010
 
-#define CFG_ATA_DATA_OFFSET	0x0000	/* Offset for data I/O			*/
-#define CFG_ATA_REG_OFFSET	0x0000	/* Offset for normal register accesses	*/
-#define CFG_ATA_ALT_OFFSET	0x0000	/* Offset for alternate registers	*/
+#define CONFIG_SYS_ATA_DATA_OFFSET	0x0000	/* Offset for data I/O			*/
+#define CONFIG_SYS_ATA_REG_OFFSET	0x0000	/* Offset for normal register accesses	*/
+#define CONFIG_SYS_ATA_ALT_OFFSET	0x0000	/* Offset for alternate registers	*/
 
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
+#define CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
 /*-----------------------------------------------------------------------
  * FLASH organization
  */
 #define FLASH_BASE0_PRELIM	0xFFC00000	/* FLASH bank #0	*/
 
-#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
-#define CFG_MAX_FLASH_SECT	256	/* max number of sectors on one chip	*/
+#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
+#define CONFIG_SYS_MAX_FLASH_SECT	256	/* max number of sectors on one chip	*/
 
-#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
-#define CFG_FLASH_WRITE_TOUT	1000	/* Timeout for Flash Write (in ms)	*/
+#define CONFIG_SYS_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
+#define CONFIG_SYS_FLASH_WRITE_TOUT	1000	/* Timeout for Flash Write (in ms)	*/
 
-#define CFG_FLASH_WORD_SIZE	unsigned short	/* flash word size (width)	*/
-#define CFG_FLASH_ADDR0		0x5555	/* 1st address for flash config cycles	*/
-#define CFG_FLASH_ADDR1		0x2AAA	/* 2nd address for flash config cycles	*/
+#define CONFIG_SYS_FLASH_WORD_SIZE	unsigned short	/* flash word size (width)	*/
+#define CONFIG_SYS_FLASH_ADDR0		0x5555	/* 1st address for flash config cycles	*/
+#define CONFIG_SYS_FLASH_ADDR1		0x2AAA	/* 2nd address for flash config cycles	*/
 /*
  * The following defines are added for buggy IOP480 byte interface.
  * All other boards should use the standard values (CPCI405 etc.)
  */
-#define CFG_FLASH_READ0		0x0000	/* 0 is standard			*/
-#define CFG_FLASH_READ1		0x0001	/* 1 is standard			*/
-#define CFG_FLASH_READ2		0x0002	/* 2 is standard			*/
+#define CONFIG_SYS_FLASH_READ0		0x0000	/* 0 is standard			*/
+#define CONFIG_SYS_FLASH_READ1		0x0001	/* 1 is standard			*/
+#define CONFIG_SYS_FLASH_READ2		0x0002	/* 2 is standard			*/
 
-#define CFG_FLASH_EMPTY_INFO		/* print 'E' for empty sector on flinfo */
+#define CONFIG_SYS_FLASH_EMPTY_INFO		/* print 'E' for empty sector on flinfo */
 
 /*-----------------------------------------------------------------------
  * Start addresses for the final memory configuration
  * (Set up by the startup code)
- * Please note that CFG_SDRAM_BASE _must_ start at 0
+ * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
  */
-#define CFG_SDRAM_BASE		0x00000000
-#define CFG_FLASH_BASE		0xFFF80000
-#define CFG_MONITOR_BASE	TEXT_BASE
-#define CFG_MONITOR_LEN		(512 * 1024)	/* Reserve 512 kB for Monitor	*/
-#define CFG_MALLOC_LEN		(2 * 1024*1024)	/* Reserve 2 MB for malloc()	*/
-
-#if (CFG_MONITOR_BASE < FLASH_BASE0_PRELIM)
-# define CFG_RAMBOOT		1
+#define CONFIG_SYS_SDRAM_BASE		0x00000000
+#define CONFIG_SYS_FLASH_BASE		0xFFF80000
+#define CONFIG_SYS_MONITOR_BASE	TEXT_BASE
+#define CONFIG_SYS_MONITOR_LEN		(512 * 1024)	/* Reserve 512 kB for Monitor	*/
+#define CONFIG_SYS_MALLOC_LEN		(2 * 1024*1024)	/* Reserve 2 MB for malloc()	*/
+
+#if (CONFIG_SYS_MONITOR_BASE < FLASH_BASE0_PRELIM)
+# define CONFIG_SYS_RAMBOOT		1
 #else
-# undef CFG_RAMBOOT
+# undef CONFIG_SYS_RAMBOOT
 #endif
 
 /*-----------------------------------------------------------------------
  * Environment Variable setup
  */
-#define CFG_ENV_IS_IN_EEPROM	1	/* use EEPROM for environment vars */
-#define CFG_ENV_OFFSET		0x100	/* environment starts at the beginning of the EEPROM */
-#define CFG_ENV_SIZE		0x700	/* 2048 bytes may be used for env vars*/
+#define CONFIG_ENV_IS_IN_EEPROM	1	/* use EEPROM for environment vars */
+#define CONFIG_ENV_OFFSET		0x100	/* environment starts at the beginning of the EEPROM */
+#define CONFIG_ENV_SIZE		0x700	/* 2048 bytes may be used for env vars*/
 				   /* total size of a CAT24WC16 is 2048 bytes */
 
-#define CFG_NVRAM_BASE_ADDR	0xF0000500		/* NVRAM base address	*/
-#define CFG_NVRAM_SIZE		242			/* NVRAM size		*/
+#define CONFIG_SYS_NVRAM_BASE_ADDR	0xF0000500		/* NVRAM base address	*/
+#define CONFIG_SYS_NVRAM_SIZE		242			/* NVRAM size		*/
 
 /*-----------------------------------------------------------------------
  * I2C EEPROM (CAT24WC16) for environment
  */
 #define CONFIG_HARD_I2C			/* I2c with hardware support */
-#define CFG_I2C_SPEED		100000	/* I2C speed and slave address */
-#define CFG_I2C_SLAVE		0x7F
+#define CONFIG_SYS_I2C_SPEED		100000	/* I2C speed and slave address */
+#define CONFIG_SYS_I2C_SLAVE		0x7F
 
-#define CFG_I2C_EEPROM_ADDR	0x50	/* EEPROM CAT24WC08		*/
-#define CFG_EEPROM_WREN         1
+#define CONFIG_SYS_I2C_EEPROM_ADDR	0x50	/* EEPROM CAT24WC08		*/
+#define CONFIG_SYS_EEPROM_WREN         1
 
 /* CAT24WC32/64... */
-#define CFG_I2C_EEPROM_ADDR_LEN 2	/* Bytes of address		*/
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2	/* Bytes of address		*/
 /* mask of address bits that overflow into the "EEPROM chip address"	*/
-#define CFG_I2C_EEPROM_ADDR_OVERFLOW	0x01
-#define CFG_EEPROM_PAGE_WRITE_BITS 5	/* The Catalyst CAT24WC32 has	*/
+#define CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW	0x01
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 5	/* The Catalyst CAT24WC32 has	*/
 					/* 32 byte page write mode using*/
 					/* last 5 bits of the address	*/
-#define CFG_EEPROM_PAGE_WRITE_DELAY_MS	10   /* and takes up to 10 msec */
-#define CFG_EEPROM_PAGE_WRITE_ENABLE
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	10   /* and takes up to 10 msec */
 
 /*-----------------------------------------------------------------------
  * External Bus Controller (EBC) Setup
@@ -303,79 +303,79 @@
 #define DUART1_BA	0xF0000408	    /* DUART Base Address		*/
 #define RTC_BA		0xF0000500	    /* RTC Base Address			*/
 #define VGA_BA		0xF1000000	    /* Epson VGA Base Address		*/
-#define CFG_NAND_BASE	0xF4000000	    /* NAND FLASH Base Address		*/
+#define CONFIG_SYS_NAND_BASE	0xF4000000	    /* NAND FLASH Base Address		*/
 
 /* Memory Bank 0 (Flash Bank 0, NOR-FLASH) initialization			*/
-#define CFG_EBC_PB0AP		0x92015480
-/*#define CFG_EBC_PB0AP		  0x08055880  /XXX* TWT=16,CSN=1,OEN=1,WBN=1,WBF=1,TH=4,SOR=1 */
-#define CFG_EBC_PB0CR		0xFFC5A000  /* BAS=0xFFC,BS=4MB,BU=R/W,BW=16bit */
+#define CONFIG_SYS_EBC_PB0AP		0x92015480
+/*#define CONFIG_SYS_EBC_PB0AP		  0x08055880  /XXX* TWT=16,CSN=1,OEN=1,WBN=1,WBF=1,TH=4,SOR=1 */
+#define CONFIG_SYS_EBC_PB0CR		0xFFC5A000  /* BAS=0xFFC,BS=4MB,BU=R/W,BW=16bit */
 
 /* Memory Bank 1 (Flash Bank 1, NAND-FLASH) initialization			*/
-#define CFG_EBC_PB1AP		0x92015480
-#define CFG_EBC_PB1CR		0xF4018000  /* BAS=0xF40,BS=1MB,BU=R/W,BW=8bit	*/
+#define CONFIG_SYS_EBC_PB1AP		0x92015480
+#define CONFIG_SYS_EBC_PB1CR		0xF4018000  /* BAS=0xF40,BS=1MB,BU=R/W,BW=8bit	*/
 
 /* Memory Bank 2 (8 Bit Peripheral: CAN, UART, RTC) initialization		*/
-#define CFG_EBC_PB2AP		0x010053C0  /* BWT=2,WBN=1,WBF=1,TH=1,RE=1,SOR=1,BEM=1 */
-#define CFG_EBC_PB2CR		0xF0018000  /* BAS=0xF00,BS=1MB,BU=R/W,BW=8bit	*/
+#define CONFIG_SYS_EBC_PB2AP		0x010053C0  /* BWT=2,WBN=1,WBF=1,TH=1,RE=1,SOR=1,BEM=1 */
+#define CONFIG_SYS_EBC_PB2CR		0xF0018000  /* BAS=0xF00,BS=1MB,BU=R/W,BW=8bit	*/
 
 /* Memory Bank 3 (16 Bit Peripheral: FPGA internal, dig. IO) initialization	*/
-#define CFG_EBC_PB3AP		0x010053C0  /* BWT=2,WBN=1,WBF=1,TH=1,RE=1,SOR=1,BEM=1 */
-#define CFG_EBC_PB3CR		0xF011A000  /* BAS=0xF01,BS=1MB,BU=R/W,BW=16bit */
+#define CONFIG_SYS_EBC_PB3AP		0x010053C0  /* BWT=2,WBN=1,WBF=1,TH=1,RE=1,SOR=1,BEM=1 */
+#define CONFIG_SYS_EBC_PB3CR		0xF011A000  /* BAS=0xF01,BS=1MB,BU=R/W,BW=16bit */
 
 /* Memory Bank 4 (Epson VGA) initialization					*/
-#define CFG_EBC_PB4AP	0x03805380   /* BWT=2,WBN=1,WBF=1,TH=1,RE=1,SOR=1,BEM=0 */
-#define CFG_EBC_PB4CR	VGA_BA | 0x7A000    /* BAS=0xF10,BS=8MB,BU=R/W,BW=16bit */
+#define CONFIG_SYS_EBC_PB4AP	0x03805380   /* BWT=2,WBN=1,WBF=1,TH=1,RE=1,SOR=1,BEM=0 */
+#define CONFIG_SYS_EBC_PB4CR	VGA_BA | 0x7A000    /* BAS=0xF10,BS=8MB,BU=R/W,BW=16bit */
 
 /*-----------------------------------------------------------------------
  * LCD Setup
  */
 
-#define CFG_LCD_BIG_MEM         0xF1200000  /* Epson S1D13806 Mem Base Address  */
-#define CFG_LCD_BIG_REG         0xF1000000  /* Epson S1D13806 Reg Base Address  */
-#define CFG_LCD_SMALL_MEM       0xF1400000  /* Epson S1D13704 Mem Base Address  */
-#define CFG_LCD_SMALL_REG       0xF140FFE0  /* Epson S1D13704 Reg Base Address  */
+#define CONFIG_SYS_LCD_BIG_MEM         0xF1200000  /* Epson S1D13806 Mem Base Address  */
+#define CONFIG_SYS_LCD_BIG_REG         0xF1000000  /* Epson S1D13806 Reg Base Address  */
+#define CONFIG_SYS_LCD_SMALL_MEM       0xF1400000  /* Epson S1D13704 Mem Base Address  */
+#define CONFIG_SYS_LCD_SMALL_REG       0xF140FFE0  /* Epson S1D13704 Reg Base Address  */
 
-#define CFG_VIDEO_LOGO_MAX_SIZE (1 << 20)
+#define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE (1 << 20)
 
 /*-----------------------------------------------------------------------
  * FPGA stuff
  */
 
-#define CFG_FPGA_BASE_ADDR 0xF0100100	    /* FPGA internal Base Address	*/
+#define CONFIG_SYS_FPGA_BASE_ADDR 0xF0100100	    /* FPGA internal Base Address	*/
 
 /* FPGA internal regs */
-#define CFG_FPGA_CTRL		0x000
+#define CONFIG_SYS_FPGA_CTRL		0x000
 
 /* FPGA Control Reg */
-#define CFG_FPGA_CTRL_CF_RESET	0x0001
-#define CFG_FPGA_CTRL_WDI	0x0002
-#define CFG_FPGA_CTRL_PS2_RESET 0x0020
+#define CONFIG_SYS_FPGA_CTRL_CF_RESET	0x0001
+#define CONFIG_SYS_FPGA_CTRL_WDI	0x0002
+#define CONFIG_SYS_FPGA_CTRL_PS2_RESET 0x0020
 
-#define CFG_FPGA_SPARTAN2	1	    /* using Xilinx Spartan 2 now    */
-#define CFG_FPGA_MAX_SIZE	128*1024    /* 128kByte is enough for XC2S50E*/
+#define CONFIG_SYS_FPGA_SPARTAN2	1	    /* using Xilinx Spartan 2 now    */
+#define CONFIG_SYS_FPGA_MAX_SIZE	128*1024    /* 128kByte is enough for XC2S50E*/
 
 /* FPGA program pin configuration */
-#define CFG_FPGA_PRG		0x04000000  /* FPGA program pin (ppc output) */
-#define CFG_FPGA_CLK		0x02000000  /* FPGA clk pin (ppc output)     */
-#define CFG_FPGA_DATA		0x01000000  /* FPGA data pin (ppc output)    */
-#define CFG_FPGA_INIT		0x00010000  /* FPGA init pin (ppc input)     */
-#define CFG_FPGA_DONE		0x00008000  /* FPGA done pin (ppc input)     */
+#define CONFIG_SYS_FPGA_PRG		0x04000000  /* FPGA program pin (ppc output) */
+#define CONFIG_SYS_FPGA_CLK		0x02000000  /* FPGA clk pin (ppc output)     */
+#define CONFIG_SYS_FPGA_DATA		0x01000000  /* FPGA data pin (ppc output)    */
+#define CONFIG_SYS_FPGA_INIT		0x00010000  /* FPGA init pin (ppc input)     */
+#define CONFIG_SYS_FPGA_DONE		0x00008000  /* FPGA done pin (ppc input)     */
 
 /*-----------------------------------------------------------------------
  * Definitions for initial stack pointer and data area (in data cache)
  */
 /* use on chip memory ( OCM ) for temperary stack until sdram is tested */
-#define CFG_TEMP_STACK_OCM	  1
+#define CONFIG_SYS_TEMP_STACK_OCM	  1
 
 /* On Chip Memory location */
-#define CFG_OCM_DATA_ADDR	0xF8000000
-#define CFG_OCM_DATA_SIZE	0x1000
-#define CFG_INIT_RAM_ADDR	CFG_OCM_DATA_ADDR /* inside of SDRAM		*/
-#define CFG_INIT_RAM_END	CFG_OCM_DATA_SIZE /* End of used area in RAM	*/
+#define CONFIG_SYS_OCM_DATA_ADDR	0xF8000000
+#define CONFIG_SYS_OCM_DATA_SIZE	0x1000
+#define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_OCM_DATA_ADDR /* inside of SDRAM		*/
+#define CONFIG_SYS_INIT_RAM_END	CONFIG_SYS_OCM_DATA_SIZE /* End of used area in RAM	*/
 
-#define CFG_GBL_DATA_SIZE      128  /* size in bytes reserved for initial data */
-#define CFG_GBL_DATA_OFFSET    (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_GBL_DATA_SIZE      128  /* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET    (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
 /*-----------------------------------------------------------------------
  * Definitions for GPIO setup (PPC405EP specific)
@@ -389,20 +389,20 @@
  * GPIO0[28-29] - UART1 data signal input/output
  * GPIO0[30-31] - EMAC0 and EMAC1 reject packet inputs -> GPIO
  */
-#define CFG_GPIO0_OSRH		0x00000550
-#define CFG_GPIO0_OSRL		0x00000110
-#define CFG_GPIO0_ISR1H		0x00000000
-#define CFG_GPIO0_ISR1L		0x15555440
-#define CFG_GPIO0_TSRH		0x00000000
-#define CFG_GPIO0_TSRL		0x00000000
-#define CFG_GPIO0_TCR		0x777E0017
-
-#define CFG_DUART_RST		(0x80000000 >> 14)
-#define CFG_LCD_ENDIAN		(0x80000000 >> 7)
-#define CFG_IIC_ON		(0x80000000 >> 8)
-#define CFG_LCD0_RST		(0x80000000 >> 30)
-#define CFG_LCD1_RST		(0x80000000 >> 31)
-#define CFG_EEPROM_WP		(0x80000000 >> 0)
+#define CONFIG_SYS_GPIO0_OSRH		0x00000550
+#define CONFIG_SYS_GPIO0_OSRL		0x00000110
+#define CONFIG_SYS_GPIO0_ISR1H		0x00000000
+#define CONFIG_SYS_GPIO0_ISR1L		0x15555440
+#define CONFIG_SYS_GPIO0_TSRH		0x00000000
+#define CONFIG_SYS_GPIO0_TSRL		0x00000000
+#define CONFIG_SYS_GPIO0_TCR		0x777E0017
+
+#define CONFIG_SYS_DUART_RST		(0x80000000 >> 14)
+#define CONFIG_SYS_LCD_ENDIAN		(0x80000000 >> 7)
+#define CONFIG_SYS_IIC_ON		(0x80000000 >> 8)
+#define CONFIG_SYS_LCD0_RST		(0x80000000 >> 30)
+#define CONFIG_SYS_LCD1_RST		(0x80000000 >> 31)
+#define CONFIG_SYS_EEPROM_WP		(0x80000000 >> 0)
 
 /*
  * Internal Definitions
diff --git a/include/configs/VOM405.h b/include/configs/VOM405.h
index ec6f20554..90efc6d81 100644
--- a/include/configs/VOM405.h
+++ b/include/configs/VOM405.h
@@ -24,7 +24,6 @@
 /*
  * board/config.h - configuration options, board specific
  */
-
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
@@ -32,7 +31,6 @@
  * High Level Configuration Options
  * (easy to change)
  */
-
 #define CONFIG_405EP		1	/* This is a PPC405 CPU		*/
 #define CONFIG_4xx		1	/* ...member of PPC4xx family	*/
 #define CONFIG_VOM405		1	/* ...on a VOM405 board		*/
@@ -50,11 +48,12 @@
 
 #define CONFIG_PREBOOT                  /* enable preboot variable      */
 
-#define CFG_LOADS_BAUD_CHANGE	1	/* allow baudrate change	*/
+#define CONFIG_SYS_LOADS_BAUD_CHANGE	1	/* allow baudrate change	*/
 
 #define CONFIG_NET_MULTI	1
 #undef  CONFIG_HAS_ETH1
 
+#define CONFIG_PPC4xx_EMAC
 #define CONFIG_MII		1	/* MII PHY management		*/
 #define CONFIG_PHY_ADDR		0	/* PHY address			*/
 #define CONFIG_LXT971_NO_SLEEP  1       /* disable sleep mode in LXT971 */
@@ -71,7 +70,6 @@
 #define CONFIG_BOOTP_DNS2
 #define CONFIG_BOOTP_SEND_HOSTNAME
 
-
 /*
  * Command line configuration.
  */
@@ -79,7 +77,6 @@
 
 #define CONFIG_CMD_DHCP
 #define CONFIG_CMD_BSP
-#define CONFIG_CMD_PCI
 #define CONFIG_CMD_IRQ
 #define CONFIG_CMD_ELF
 #define CONFIG_CMD_I2C
@@ -87,6 +84,8 @@
 #define CONFIG_CMD_PING
 #define CONFIG_CMD_EEPROM
 
+#define CONFIG_OF_LIBFDT
+#define CONFIG_OF_BOARD_SETUP
 
 #undef	CONFIG_WATCHDOG			/* watchdog disabled		*/
 
@@ -97,200 +96,169 @@
 /*
  * Miscellaneous configurable options
  */
-#define CFG_LONGHELP			/* undef to save memory		*/
-#define CFG_PROMPT	"=> "		/* Monitor Command Prompt	*/
+#define CONFIG_SYS_LONGHELP			/* undef to save memory		*/
+#define CONFIG_SYS_PROMPT	"=> "		/* Monitor Command Prompt	*/
 
-#undef	CFG_HUSH_PARSER			/* use "hush" command parser	*/
-#ifdef	CFG_HUSH_PARSER
-#define CFG_PROMPT_HUSH_PS2	"> "
+#undef	CONFIG_SYS_HUSH_PARSER			/* use "hush" command parser	*/
+#ifdef	CONFIG_SYS_HUSH_PARSER
+#define CONFIG_SYS_PROMPT_HUSH_PS2	"> "
 #endif
 
 #if defined(CONFIG_CMD_KGDB)
-#define CFG_CBSIZE	1024		/* Console I/O Buffer Size	*/
+#define CONFIG_SYS_CBSIZE	1024		/* Console I/O Buffer Size	*/
 #else
-#define CFG_CBSIZE	256		/* Console I/O Buffer Size	*/
+#define CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size	*/
 #endif
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define CFG_MAXARGS	16		/* max number of command args	*/
-#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS	16		/* max number of command args	*/
+#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
 
-#define CFG_DEVICE_NULLDEV	1	/* include nulldev device	*/
+#define CONFIG_SYS_DEVICE_NULLDEV	1	/* include nulldev device	*/
 
-#define CFG_CONSOLE_INFO_QUIET	1	/* don't print console @ startup*/
+#define CONFIG_SYS_CONSOLE_INFO_QUIET	1	/* don't print console @ startup*/
 
-#define CFG_MEMTEST_START	0x0400000	/* memtest works on	*/
-#define CFG_MEMTEST_END		0x0C00000	/* 4 ... 12 MB in DRAM	*/
+#define CONFIG_SYS_MEMTEST_START	0x0400000	/* memtest works on	*/
+#define CONFIG_SYS_MEMTEST_END		0x0C00000	/* 4 ... 12 MB in DRAM	*/
 
-#undef	CFG_EXT_SERIAL_CLOCK	       /* no external serial clock used */
-#define CFG_IGNORE_405_UART_ERRATA_59	/* ignore ppc405gp errata #59	*/
-#define CFG_BASE_BAUD	    691200
+#undef	CONFIG_SYS_EXT_SERIAL_CLOCK	       /* no external serial clock used */
+#define CONFIG_SYS_IGNORE_405_UART_ERRATA_59	/* ignore ppc405gp errata #59	*/
+#define CONFIG_SYS_BASE_BAUD	    691200
 #undef	CONFIG_UART1_CONSOLE		/* define for uart1 as console	*/
 
 /* The following table includes the supported baudrates */
-#define CFG_BAUDRATE_TABLE	\
+#define CONFIG_SYS_BAUDRATE_TABLE	\
 	{ 300, 600, 1200, 2400, 4800, 9600, 19200, 38400,     \
 	 57600, 115200, 230400, 460800, 921600 }
 
-#define CFG_LOAD_ADDR	0x100000	/* default load address */
-#define CFG_EXTBDINFO	1		/* To use extended board_into (bd_t) */
+#define CONFIG_SYS_LOAD_ADDR	0x100000	/* default load address */
+#define CONFIG_SYS_EXTBDINFO	1		/* To use extended board_into (bd_t) */
 
-#define CFG_HZ		1000		/* decrementer freq: 1 ms ticks */
+#define CONFIG_SYS_HZ		1000		/* decrementer freq: 1 ms ticks */
 
+#define CONFIG_CMDLINE_EDITING	1	/* add command line history	*/
 #define CONFIG_ZERO_BOOTDELAY_CHECK	/* check for keypress on bootdelay==0 */
 
 #define CONFIG_VERSION_VARIABLE 1	/* include version env variable */
 
-#define CFG_RX_ETH_BUFFER	16	/* use 16 rx buffer on 405 emac */
-
-/*-----------------------------------------------------------------------
- * PCI stuff
- *-----------------------------------------------------------------------
- */
-#define PCI_HOST_ADAPTER 0		/* configure as pci adapter	*/
-#define PCI_HOST_FORCE	1		/* configure as pci host	*/
-#define PCI_HOST_AUTO	2		/* detected via arbiter enable	*/
-
-#define CONFIG_PCI			/* include pci support		*/
-#define CONFIG_PCI_HOST PCI_HOST_HOST	/* select pci host function	*/
-#undef	CONFIG_PCI_PNP			/* do pci plug-and-play		*/
-					/* resource configuration	*/
-
-#undef	CONFIG_PCI_SCAN_SHOW		/* print pci devices @ startup	*/
-
-#define CFG_PCI_SUBSYS_VENDORID 0x12FE	/* PCI Vendor ID: esd gmbh	*/
-#define CFG_PCI_SUBSYS_DEVICEID 0x0405	/* PCI Device ID: CPCI-405	*/
-#define CFG_PCI_CLASSCODE	0x0b20	/* PCI Class Code: Processor/PPC*/
-#define CFG_PCI_PTM1LA	0x00000000	/* point to sdram		*/
-#define CFG_PCI_PTM1MS	0xfc000001	/* 64MB, enable hard-wired to 1 */
-#define CFG_PCI_PTM1PCI 0x00000000	/* Host: use this pci address	*/
-#define CFG_PCI_PTM2LA	0xffc00000	/* point to flash		*/
-#define CFG_PCI_PTM2MS	0xffc00001	/* 4MB, enable			*/
-#define CFG_PCI_PTM2PCI 0x04000000	/* Host: use this pci address	*/
+#define CONFIG_SYS_RX_ETH_BUFFER	16	/* use 16 rx buffer on 405 emac */
 
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
-/*-----------------------------------------------------------------------
+#define CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
+/*
  * FLASH organization
  */
 #define FLASH_BASE0_PRELIM	0xFFC00000	/* FLASH bank #0	*/
 
-#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
-#define CFG_MAX_FLASH_SECT	256	/* max number of sectors on one chip	*/
+#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
+#define CONFIG_SYS_MAX_FLASH_SECT	256	/* max number of sectors on one chip	*/
 
-#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
-#define CFG_FLASH_WRITE_TOUT	1000	/* Timeout for Flash Write (in ms)	*/
+#define CONFIG_SYS_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
+#define CONFIG_SYS_FLASH_WRITE_TOUT	1000	/* Timeout for Flash Write (in ms)	*/
 
-#define CFG_FLASH_WORD_SIZE	unsigned short	/* flash word size (width)	*/
-#define CFG_FLASH_ADDR0		0x5555	/* 1st address for flash config cycles	*/
-#define CFG_FLASH_ADDR1		0x2AAA	/* 2nd address for flash config cycles	*/
+#define CONFIG_SYS_FLASH_WORD_SIZE	unsigned short	/* flash word size (width)	*/
+#define CONFIG_SYS_FLASH_ADDR0		0x5555	/* 1st address for flash config cycles	*/
+#define CONFIG_SYS_FLASH_ADDR1		0x2AAA	/* 2nd address for flash config cycles	*/
 /*
  * The following defines are added for buggy IOP480 byte interface.
  * All other boards should use the standard values (CPCI405 etc.)
  */
-#define CFG_FLASH_READ0		0x0000	/* 0 is standard			*/
-#define CFG_FLASH_READ1		0x0001	/* 1 is standard			*/
-#define CFG_FLASH_READ2		0x0002	/* 2 is standard			*/
+#define CONFIG_SYS_FLASH_READ0		0x0000	/* 0 is standard			*/
+#define CONFIG_SYS_FLASH_READ1		0x0001	/* 1 is standard			*/
+#define CONFIG_SYS_FLASH_READ2		0x0002	/* 2 is standard			*/
 
-#define CFG_FLASH_EMPTY_INFO		/* print 'E' for empty sector on flinfo */
-
-#if 0 /* test-only */
-#define CFG_JFFS2_FIRST_BANK	0	    /* use for JFFS2 */
-#define CFG_JFFS2_NUM_BANKS	1	    /* ! second bank contains U-Boot */
-#endif
+#define CONFIG_SYS_FLASH_EMPTY_INFO		/* print 'E' for empty sector on flinfo */
 
-/*-----------------------------------------------------------------------
+/*
  * Start addresses for the final memory configuration
  * (Set up by the startup code)
- * Please note that CFG_SDRAM_BASE _must_ start at 0
+ * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
  */
-#define CFG_SDRAM_BASE		0x00000000
-#define CFG_FLASH_BASE		0xFFFC0000
-#define CFG_MONITOR_BASE	TEXT_BASE
-#define CFG_MONITOR_LEN		(256 * 1024)	/* Reserve 256 kB for Monitor	*/
-#define CFG_MALLOC_LEN		(256 * 1024)	/* Reserve 256 kB for malloc()	*/
-
-#if (CFG_MONITOR_BASE < FLASH_BASE0_PRELIM)
-# define CFG_RAMBOOT		1
+#define CONFIG_SYS_SDRAM_BASE		0x00000000
+#define CONFIG_SYS_FLASH_BASE		0xFFFC0000
+#define CONFIG_SYS_MONITOR_BASE	TEXT_BASE
+#define CONFIG_SYS_MONITOR_LEN		(256 * 1024)	/* Reserve 256 kB for Monitor	*/
+#define CONFIG_SYS_MALLOC_LEN		(256 * 1024)	/* Reserve 256 kB for malloc()	*/
+
+#if (CONFIG_SYS_MONITOR_BASE < FLASH_BASE0_PRELIM)
+# define CONFIG_SYS_RAMBOOT		1
 #else
-# undef CFG_RAMBOOT
+# undef CONFIG_SYS_RAMBOOT
 #endif
 
-/*-----------------------------------------------------------------------
+/*
  * Environment Variable setup
  */
-#define CFG_ENV_IS_IN_EEPROM	1	/* use EEPROM for environment vars */
-#define CFG_ENV_OFFSET		0x100	/* environment starts at the beginning of the EEPROM */
-#define CFG_ENV_SIZE		0x700	/* 2048 bytes may be used for env vars*/
+#define CONFIG_ENV_IS_IN_EEPROM	1	/* use EEPROM for environment vars */
+#define CONFIG_ENV_OFFSET		0x100	/* environment starts at the beginning of the EEPROM */
+#define CONFIG_ENV_SIZE		0x700	/* 2048 bytes may be used for env vars*/
 				   /* total size of a CAT24WC16 is 2048 bytes */
 
-#define CFG_NVRAM_BASE_ADDR	0xF0000500		/* NVRAM base address	*/
-#define CFG_NVRAM_SIZE		242			/* NVRAM size		*/
+#define CONFIG_SYS_NVRAM_BASE_ADDR	0xF0000500		/* NVRAM base address	*/
+#define CONFIG_SYS_NVRAM_SIZE		242			/* NVRAM size		*/
 
-/*-----------------------------------------------------------------------
+/*
  * I2C EEPROM (CAT24WC16) for environment
  */
 #define CONFIG_HARD_I2C			/* I2c with hardware support */
-#define CFG_I2C_SPEED		400000	/* I2C speed and slave address */
-#define CFG_I2C_SLAVE		0x7F
+#define CONFIG_SYS_I2C_SPEED		400000	/* I2C speed and slave address */
+#define CONFIG_SYS_I2C_SLAVE		0x7F
 
-#define CFG_I2C_EEPROM_ADDR	0x50	/* EEPROM CAT28WC08		*/
-#define CFG_I2C_EEPROM_ADDR_LEN 1	/* Bytes of address		*/
+#define CONFIG_SYS_I2C_EEPROM_ADDR	0x50	/* EEPROM CAT28WC08		*/
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1	/* Bytes of address		*/
 /* mask of address bits that overflow into the "EEPROM chip address"	*/
-#define CFG_I2C_EEPROM_ADDR_OVERFLOW	0x07
-#define CFG_EEPROM_PAGE_WRITE_BITS 4	/* The Catalyst CAT24WC08 has	*/
+#define CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW	0x07
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 4	/* The Catalyst CAT24WC08 has	*/
 					/* 16 byte page write mode using*/
 					/* last 4 bits of the address	*/
-#define CFG_EEPROM_PAGE_WRITE_DELAY_MS	10   /* and takes up to 10 msec */
-#define CFG_EEPROM_PAGE_WRITE_ENABLE
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	10   /* and takes up to 10 msec */
 
-/*-----------------------------------------------------------------------
+/*
  * External Bus Controller (EBC) Setup
  */
-
 #define CAN_BA		0xF0000000	    /* CAN Base Address			*/
 
 /* Memory Bank 0 (Flash Bank 0, NOR-FLASH) initialization			*/
-#define CFG_EBC_PB0AP		0x92015480
-#define CFG_EBC_PB0CR		0xFFC5A000  /* BAS=0xFFC,BS=4MB,BU=R/W,BW=16bit */
+#define CONFIG_SYS_EBC_PB0AP		0x92015480
+#define CONFIG_SYS_EBC_PB0CR		0xFFC5A000  /* BAS=0xFFC,BS=4MB,BU=R/W,BW=16bit */
 
 /* Memory Bank 2 (8 Bit Peripheral: CAN, UART, RTC) initialization		*/
-#define CFG_EBC_PB2AP		0x010053C0  /* BWT=2,WBN=1,WBF=1,TH=1,RE=1,SOR=1,BEM=1 */
-#define CFG_EBC_PB2CR		0xF0018000  /* BAS=0xF00,BS=1MB,BU=R/W,BW=8bit	*/
+#define CONFIG_SYS_EBC_PB2AP		0x010053C0  /* BWT=2,WBN=1,WBF=1,TH=1,RE=1,SOR=1,BEM=1 */
+#define CONFIG_SYS_EBC_PB2CR		0xF0018000  /* BAS=0xF00,BS=1MB,BU=R/W,BW=8bit	*/
 
-/*-----------------------------------------------------------------------
+/*
  * FPGA stuff
  */
-#define CFG_FPGA_XC95XL		1	    /* using Xilinx XC95XL CPLD	     */
-#define CFG_FPGA_MAX_SIZE	32*1024	    /* 32kByte is enough for CPLD    */
+#define CONFIG_SYS_FPGA_XC95XL		1	    /* using Xilinx XC95XL CPLD	     */
+#define CONFIG_SYS_FPGA_MAX_SIZE	32*1024	    /* 32kByte is enough for CPLD    */
 
 /* FPGA program pin configuration */
-#define CFG_FPGA_PRG		0x04000000  /* JTAG TMS pin (ppc output)     */
-#define CFG_FPGA_CLK		0x02000000  /* JTAG TCK pin (ppc output)     */
-#define CFG_FPGA_DATA		0x01000000  /* JTAG TDO->TDI data pin (ppc output) */
-#define CFG_FPGA_INIT		0x00010000  /* unused (ppc input)	     */
-#define CFG_FPGA_DONE		0x00008000  /* JTAG TDI->TDO pin (ppc input) */
+#define CONFIG_SYS_FPGA_PRG		0x04000000  /* JTAG TMS pin (ppc output)     */
+#define CONFIG_SYS_FPGA_CLK		0x02000000  /* JTAG TCK pin (ppc output)     */
+#define CONFIG_SYS_FPGA_DATA		0x01000000  /* JTAG TDO->TDI data pin (ppc output) */
+#define CONFIG_SYS_FPGA_INIT		0x00010000  /* unused (ppc input)	     */
+#define CONFIG_SYS_FPGA_DONE		0x00008000  /* JTAG TDI->TDO pin (ppc input) */
 
-/*-----------------------------------------------------------------------
+/*
  * Definitions for initial stack pointer and data area (in data cache)
  */
 /* use on chip memory ( OCM ) for temperary stack until sdram is tested */
-#define CFG_TEMP_STACK_OCM	  1
+#define CONFIG_SYS_TEMP_STACK_OCM	  1
 
 /* On Chip Memory location */
-#define CFG_OCM_DATA_ADDR	0xF8000000
-#define CFG_OCM_DATA_SIZE	0x1000
-#define CFG_INIT_RAM_ADDR	CFG_OCM_DATA_ADDR /* inside of SDRAM		*/
-#define CFG_INIT_RAM_END	CFG_OCM_DATA_SIZE /* End of used area in RAM	*/
+#define CONFIG_SYS_OCM_DATA_ADDR	0xF8000000
+#define CONFIG_SYS_OCM_DATA_SIZE	0x1000
+#define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_OCM_DATA_ADDR /* inside of SDRAM		*/
+#define CONFIG_SYS_INIT_RAM_END	CONFIG_SYS_OCM_DATA_SIZE /* End of used area in RAM	*/
 
-#define CFG_GBL_DATA_SIZE      128  /* size in bytes reserved for initial data */
-#define CFG_GBL_DATA_OFFSET    (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_GBL_DATA_SIZE      128  /* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET    (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
-/*-----------------------------------------------------------------------
+/*
  * Definitions for GPIO setup (PPC405EP specific)
  *
  * GPIO0[0]	- External Bus Controller BLAST output
@@ -306,13 +274,13 @@
 /* GPIO Output:		OSR=00, ISR=00, TSR=00, TCR=1 */
 /* Alt. Funtion Input:	OSR=00, ISR=01, TSR=00, TCR=0 */
 /* Alt. Funtion Output: OSR=01, ISR=00, TSR=00, TCR=1 */
-#define CFG_GPIO0_OSRH		0x40000500  /*	0 ... 15 */
-#define CFG_GPIO0_OSRL		0x00000110  /* 16 ... 31 */
-#define CFG_GPIO0_ISR1H		0x00000000  /*	0 ... 15 */
-#define CFG_GPIO0_ISR1L		0x14000045  /* 16 ... 31 */
-#define CFG_GPIO0_TSRH		0x00000000  /*	0 ... 15 */
-#define CFG_GPIO0_TSRL		0x00000000  /* 16 ... 31 */
-#define CFG_GPIO0_TCR		0xF7FE0014  /*	0 ... 31 */
+#define CONFIG_SYS_GPIO0_OSRH		0x40000500  /*	0 ... 15 */
+#define CONFIG_SYS_GPIO0_OSRL		0x00000110  /* 16 ... 31 */
+#define CONFIG_SYS_GPIO0_ISR1H		0x00000000  /*	0 ... 15 */
+#define CONFIG_SYS_GPIO0_ISR1L		0x14000045  /* 16 ... 31 */
+#define CONFIG_SYS_GPIO0_TSRH		0x00000000  /*	0 ... 15 */
+#define CONFIG_SYS_GPIO0_TSRL		0x00000000  /* 16 ... 31 */
+#define CONFIG_SYS_GPIO0_TCR		0xF7FE0014  /*	0 ... 31 */
 
 /*
  * Internal Definitions
diff --git a/include/configs/VoVPN-GW.h b/include/configs/VoVPN-GW.h
index db05d82bf..982f8d801 100644
--- a/include/configs/VoVPN-GW.h
+++ b/include/configs/VoVPN-GW.h
@@ -82,10 +82,10 @@
 #define CONFIG_LOADS_ECHO		1
 
 /* don't allow baudrate change	*/
-#undef	CFG_LOADS_BAUD_CHANGE
+#undef	CONFIG_SYS_LOADS_BAUD_CHANGE
 
 /* supported baudrates */
-#define CFG_BAUDRATE_TABLE		{ 9600, 19200, 38400, 57600, 115200 }
+#define CONFIG_SYS_BAUDRATE_TABLE		{ 9600, 19200, 38400, 57600, 115200 }
 
 /*
  * select ethernet configuration
@@ -107,32 +107,32 @@
 #define	CONFIG_ETHER_INDEX		1
 
 /* Marvell Switch SMI base addr */
-#define CFG_PHY_ADDR			0x10
+#define CONFIG_SYS_PHY_ADDR			0x10
 
 /* FCC1 RMII REFCLK is CLK10 */
-#define CFG_CMXFCR_VALUE		CMXFCR_TF1CS_CLK10
-#define CFG_CMXFCR_MASK			(CMXFCR_FC1|CMXFCR_TF1CS_MSK)
+#define CONFIG_SYS_CMXFCR_VALUE		CMXFCR_TF1CS_CLK10
+#define CONFIG_SYS_CMXFCR_MASK			(CMXFCR_FC1|CMXFCR_TF1CS_MSK)
 
 /* BDs and buffers on 60x bus */
-#define CFG_CPMFCR_RAMTYPE		0
+#define CONFIG_SYS_CPMFCR_RAMTYPE		0
 
 /* Local Protect, Full duplex, Flowcontrol, RMII */
-#define CFG_FCC_PSMR			(FCC_PSMR_LPB|FCC_PSMR_FDE|\
+#define CONFIG_SYS_FCC_PSMR			(FCC_PSMR_LPB|FCC_PSMR_FDE|\
 					 FCC_PSMR_FCE|FCC_PSMR_RMII)
 
 /* bit-bang MII PHY management	*/
 #define CONFIG_BITBANGMII
 
 #define MDIO_PORT			1		/* Port B */
-#define CFG_MDIO_PIN			0x00002000	/* PB18 */
-#define CFG_MDC_PIN			0x00001000	/* PB19 */
-#define MDIO_ACTIVE			(iop->pdir |=  CFG_MDIO_PIN)
-#define MDIO_TRISTATE			(iop->pdir &= ~CFG_MDIO_PIN)
-#define MDIO_READ			((iop->pdat &  CFG_MDIO_PIN) != 0)
-#define MDIO(bit)			if(bit) iop->pdat |=  CFG_MDIO_PIN; \
-					else	iop->pdat &= ~CFG_MDIO_PIN
-#define MDC(bit)			if(bit) iop->pdat |=  CFG_MDC_PIN; \
-					else	iop->pdat &= ~CFG_MDC_PIN
+#define CONFIG_SYS_MDIO_PIN			0x00002000	/* PB18 */
+#define CONFIG_SYS_MDC_PIN			0x00001000	/* PB19 */
+#define MDIO_ACTIVE			(iop->pdir |=  CONFIG_SYS_MDIO_PIN)
+#define MDIO_TRISTATE			(iop->pdir &= ~CONFIG_SYS_MDIO_PIN)
+#define MDIO_READ			((iop->pdat &  CONFIG_SYS_MDIO_PIN) != 0)
+#define MDIO(bit)			if(bit) iop->pdat |=  CONFIG_SYS_MDIO_PIN; \
+					else	iop->pdat &= ~CONFIG_SYS_MDIO_PIN
+#define MDC(bit)			if(bit) iop->pdat |=  CONFIG_SYS_MDC_PIN; \
+					else	iop->pdat &= ~CONFIG_SYS_MDC_PIN
 #define MIIDELAY			udelay(1)
 
 #endif
@@ -209,60 +209,60 @@
  */
 
 /* undef to save memory */
-#define	CFG_LONGHELP
+#define	CONFIG_SYS_LONGHELP
 
 /* monitor command prompt */
-#define	CFG_PROMPT			"=> "
+#define	CONFIG_SYS_PROMPT			"=> "
 
 /* console i/o buffer size */
 #if defined(CONFIG_CMD_KGDB)
-#define	CFG_CBSIZE			1024
+#define	CONFIG_SYS_CBSIZE			1024
 #else
-#define	CFG_CBSIZE			256
+#define	CONFIG_SYS_CBSIZE			256
 #endif
 
 /* print buffer size */
-#define	CFG_PBSIZE			(CFG_CBSIZE + sizeof(CFG_PROMPT) + 16)
+#define	CONFIG_SYS_PBSIZE			(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
 
 /* max number of command args */
-#define	CFG_MAXARGS			16
+#define	CONFIG_SYS_MAXARGS			16
 
 /* boot argument buffer size */
-#define CFG_BARGSIZE			CFG_CBSIZE
+#define CONFIG_SYS_BARGSIZE			CONFIG_SYS_CBSIZE
 
 /* memtest works on */
-#define CFG_MEMTEST_START		0x00100000
+#define CONFIG_SYS_MEMTEST_START		0x00100000
 /* 1 ... 15 MB in DRAM */
-#define CFG_MEMTEST_END			0x00f00000
+#define CONFIG_SYS_MEMTEST_END			0x00f00000
 /* full featured memtest */
-#define CFG_ALT_MEMTEST
+#define CONFIG_SYS_ALT_MEMTEST
 
 /* default load address */
-#define	CFG_LOAD_ADDR			0x00100000
+#define	CONFIG_SYS_LOAD_ADDR			0x00100000
 
 /* decrementer freq: 1 ms ticks	*/
-#define	CFG_HZ				1000
+#define	CONFIG_SYS_HZ				1000
 
 /* configure flash */
-#define CFG_FLASH_BASE			0xff800000
-#define CFG_MAX_FLASH_BANKS		1
-#define CFG_MAX_FLASH_SECT		64
-#define CFG_FLASH_SIZE			8
-#undef	CFG_FLASH_16BIT
-#define CFG_FLASH_ERASE_TOUT		240000
-#define CFG_FLASH_WRITE_TOUT		500
-#define CFG_FLASH_LOCK_TOUT		500
-#define CFG_FLASH_UNLOCK_TOUT		10000
-#define CFG_FLASH_PROTECTION
+#define CONFIG_SYS_FLASH_BASE			0xff800000
+#define CONFIG_SYS_MAX_FLASH_BANKS		1
+#define CONFIG_SYS_MAX_FLASH_SECT		64
+#define CONFIG_SYS_FLASH_SIZE			8
+#undef	CONFIG_SYS_FLASH_16BIT
+#define CONFIG_SYS_FLASH_ERASE_TOUT		240000
+#define CONFIG_SYS_FLASH_WRITE_TOUT		500
+#define CONFIG_SYS_FLASH_LOCK_TOUT		500
+#define CONFIG_SYS_FLASH_UNLOCK_TOUT		10000
+#define CONFIG_SYS_FLASH_PROTECTION
 
 /* monitor in flash */
-#define CFG_MONITOR_OFFSET		0x00700000
+#define CONFIG_SYS_MONITOR_OFFSET		0x00700000
 
 /* environment in flash */
-#define CFG_ENV_IS_IN_FLASH		1
-#define CFG_ENV_ADDR			(CFG_FLASH_BASE + 0x00020000)
-#define CFG_ENV_SIZE			0x00020000
-#define CFG_ENV_SECT_SIZE		0x00020000
+#define CONFIG_ENV_IS_IN_FLASH		1
+#define CONFIG_ENV_ADDR			(CONFIG_SYS_FLASH_BASE + 0x00020000)
+#define CONFIG_ENV_SIZE			0x00020000
+#define CONFIG_ENV_SECT_SIZE		0x00020000
 
 /*
  * Initial memory map for linux
@@ -270,52 +270,52 @@
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define CFG_BOOTMAPSZ			(8 << 20)
+#define CONFIG_SYS_BOOTMAPSZ			(8 << 20)
 
 /* hard reset configuration words */
 #ifdef	CONFIG_CLKIN_66MHz
-#define CFG_HRCW_MASTER			0x04643050
+#define CONFIG_SYS_HRCW_MASTER			0x04643050
 #else
 #error NO HRCW FOR 100MHZ SPECIFIED !!!
 #endif
-#define CFG_HRCW_SLAVE1			0x00000000
-#define CFG_HRCW_SLAVE2			0x00000000
-#define CFG_HRCW_SLAVE3			0x00000000
-#define CFG_HRCW_SLAVE4			0x00000000
-#define CFG_HRCW_SLAVE5			0x00000000
-#define CFG_HRCW_SLAVE6			0x00000000
-#define CFG_HRCW_SLAVE7			0x00000000
+#define CONFIG_SYS_HRCW_SLAVE1			0x00000000
+#define CONFIG_SYS_HRCW_SLAVE2			0x00000000
+#define CONFIG_SYS_HRCW_SLAVE3			0x00000000
+#define CONFIG_SYS_HRCW_SLAVE4			0x00000000
+#define CONFIG_SYS_HRCW_SLAVE5			0x00000000
+#define CONFIG_SYS_HRCW_SLAVE6			0x00000000
+#define CONFIG_SYS_HRCW_SLAVE7			0x00000000
 
 /* internal memory mapped register */
-#define CFG_IMMR			0xF0000000
+#define CONFIG_SYS_IMMR			0xF0000000
 
 /* definitions for initial stack pointer and data area (in DPRAM) */
-#define CFG_INIT_RAM_ADDR		CFG_IMMR
-#define CFG_INIT_RAM_END		0x2000
-#define CFG_GBL_DATA_SIZE		128
-#define CFG_GBL_DATA_OFFSET		(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP_OFFSET		CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_INIT_RAM_ADDR		CONFIG_SYS_IMMR
+#define CONFIG_SYS_INIT_RAM_END		0x2000
+#define CONFIG_SYS_GBL_DATA_SIZE		128
+#define CONFIG_SYS_GBL_DATA_OFFSET		(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET		CONFIG_SYS_GBL_DATA_OFFSET
 
 /*
  * Start addresses for the final memory configuration
  * (Set up by the startup code)
- * Please note that CFG_SDRAM_BASE _must_ start at 0
+ * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
  */
-#define CFG_SDRAM_BASE			0x00000000
-#define CFG_SDRAM_SIZE			(32*1024*1024)
-#define CFG_MONITOR_BASE		TEXT_BASE
-#define CFG_MONITOR_FLASH		(CFG_FLASH_BASE + CFG_MONITOR_OFFSET)
-#define CFG_MONITOR_LEN			0x00020000
-#define CFG_MALLOC_LEN			0x00020000
+#define CONFIG_SYS_SDRAM_BASE			0x00000000
+#define CONFIG_SYS_SDRAM_SIZE			(32*1024*1024)
+#define CONFIG_SYS_MONITOR_BASE		TEXT_BASE
+#define CONFIG_SYS_MONITOR_FLASH		(CONFIG_SYS_FLASH_BASE + CONFIG_SYS_MONITOR_OFFSET)
+#define CONFIG_SYS_MONITOR_LEN			0x00020000
+#define CONFIG_SYS_MALLOC_LEN			0x00020000
 
 /* boot flags */
 #define BOOTFLAG_COLD			0x01	/* normal power-on */
 #define BOOTFLAG_WARM			0x02	/* software reboot */
 
 /* cache configuration */
-#define CFG_CACHELINE_SIZE		32      /* for MPC8260 */
+#define CONFIG_SYS_CACHELINE_SIZE		32      /* for MPC8260 */
 #if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT		5	/* log base 2 of above */
+#define CONFIG_SYS_CACHELINE_SHIFT		5	/* log base 2 of above */
 #endif
 
 /*
@@ -328,43 +328,43 @@
  *
  * HID1 has only read-only information - nothing to set.
  */
-#define CFG_HID0_INIT			(HID0_ICE|HID0_DCE|\
+#define CONFIG_SYS_HID0_INIT			(HID0_ICE|HID0_DCE|\
 					 HID0_ICFI|HID0_DCI|HID0_IFEM|HID0_ABE)
-#define CFG_HID0_FINAL			(HID0_IFEM|HID0_ABE)
-#define CFG_HID2			0
+#define CONFIG_SYS_HID0_FINAL			(HID0_IFEM|HID0_ABE)
+#define CONFIG_SYS_HID2			0
 
 /* RMR - reset mode register - turn on checkstop reset enable */
-#define CFG_RMR				RMR_CSRE
+#define CONFIG_SYS_RMR				RMR_CSRE
 
 /* BCR - bus configuration */
-#define CFG_BCR				0x00000000
+#define CONFIG_SYS_BCR				0x00000000
 
 /* SIUMCR - siu module configuration */
-#define CFG_SIUMCR			0x4905c000
+#define CONFIG_SYS_SIUMCR			0x4905c000
 
 /* SYPCR - system protection control */
 #if defined(CONFIG_WATCHDOG)
-#define CFG_SYPCR			0xffffff87
+#define CONFIG_SYS_SYPCR			0xffffff87
 #else
-#define CFG_SYPCR			0xffffff83
+#define CONFIG_SYS_SYPCR			0xffffff83
 #endif
 
 /* TMCNTSC - time counter status and control */
 /* clear interrupts XXX jse */
-/*#define CFG_TMCNTSC			(TMCNTSC_SEC|TMCNTSC_ALR) */
-#define CFG_TMCNTSC			(TMCNTSC_SEC|TMCNTSC_ALR|\
+/*#define CONFIG_SYS_TMCNTSC			(TMCNTSC_SEC|TMCNTSC_ALR) */
+#define CONFIG_SYS_TMCNTSC			(TMCNTSC_SEC|TMCNTSC_ALR|\
 					 TMCNTSC_TCF|TMCNTSC_TCE)
 
 /* PISCR - periodic interrupt status and control */
 /* clear interrupts XXX jse */
-/*#define CFG_PISCR			(PISCR_PS) */
-#define CFG_PISCR			(PISCR_PS|PISCR_PTF|PISCR_PTE)
+/*#define CONFIG_SYS_PISCR			(PISCR_PS) */
+#define CONFIG_SYS_PISCR			(PISCR_PS|PISCR_PTF|PISCR_PTE)
 
 /* SCCR - system clock control */
-#define CFG_SCCR			0x000001a9
+#define CONFIG_SYS_SCCR			0x000001a9
 
 /* RCCR - risc controller configuration */
-#define CFG_RCCR			0
+#define CONFIG_SYS_RCCR			0
 
 /*
  * MEMORY MAP
@@ -379,37 +379,37 @@
  *  x  - IMMR     384KB		base=0xf0000000
  */
 /* XXX jse 100MHz TODO */
-#define CFG_BR0_PRELIM			0xff800801
-#define CFG_OR0_PRELIM			0xff801e44
-#define CFG_BR1_PRELIM			0x00000041
-#define CFG_OR1_PRELIM			0xfe002ec0
+#define CONFIG_SYS_BR0_PRELIM			0xff800801
+#define CONFIG_SYS_OR0_PRELIM			0xff801e44
+#define CONFIG_SYS_BR1_PRELIM			0x00000041
+#define CONFIG_SYS_OR1_PRELIM			0xfe002ec0
 #if 1
-#define CFG_BR2_PRELIM			0xf0101001
-#define CFG_OR2_PRELIM			0xfff00ef4
-#define CFG_BR3_PRELIM			0xf0201001
-#define CFG_OR3_PRELIM			0xfff00ef4
-#define CFG_BR4_PRELIM			0xf0301001
-#define CFG_OR4_PRELIM			0xfff00ef4
-#define CFG_BR5_PRELIM			0xf0401001
-#define CFG_OR5_PRELIM			0xfff00ef4
+#define CONFIG_SYS_BR2_PRELIM			0xf0101001
+#define CONFIG_SYS_OR2_PRELIM			0xfff00ef4
+#define CONFIG_SYS_BR3_PRELIM			0xf0201001
+#define CONFIG_SYS_OR3_PRELIM			0xfff00ef4
+#define CONFIG_SYS_BR4_PRELIM			0xf0301001
+#define CONFIG_SYS_OR4_PRELIM			0xfff00ef4
+#define CONFIG_SYS_BR5_PRELIM			0xf0401001
+#define CONFIG_SYS_OR5_PRELIM			0xfff00ef4
 #else
-#define CFG_BR2_PRELIM			0xf0101081
-#define CFG_OR2_PRELIM			0xfff00104
-#define CFG_BR3_PRELIM			0xf0201081
-#define CFG_OR3_PRELIM			0xfff00104
-#define CFG_BR4_PRELIM			0xf0301081
-#define CFG_OR4_PRELIM			0xfff00104
-#define CFG_BR5_PRELIM			0xf0401081
-#define CFG_OR5_PRELIM			0xfff00104
+#define CONFIG_SYS_BR2_PRELIM			0xf0101081
+#define CONFIG_SYS_OR2_PRELIM			0xfff00104
+#define CONFIG_SYS_BR3_PRELIM			0xf0201081
+#define CONFIG_SYS_OR3_PRELIM			0xfff00104
+#define CONFIG_SYS_BR4_PRELIM			0xf0301081
+#define CONFIG_SYS_OR4_PRELIM			0xfff00104
+#define CONFIG_SYS_BR5_PRELIM			0xf0401081
+#define CONFIG_SYS_OR5_PRELIM			0xfff00104
 #endif
-#define CFG_BR7_PRELIM			0xf0500881
-#define CFG_OR7_PRELIM			0xffff8104
-#define CFG_MPTPR			0x2700
-#define CFG_PSDMR			0x822a2452	/* optimal */
-/*#define CFG_PSDMR			0x822a48a3 */	/* relaxed */
-#define CFG_PSRT			0x1a
+#define CONFIG_SYS_BR7_PRELIM			0xf0500881
+#define CONFIG_SYS_OR7_PRELIM			0xffff8104
+#define CONFIG_SYS_MPTPR			0x2700
+#define CONFIG_SYS_PSDMR			0x822a2452	/* optimal */
+/*#define CONFIG_SYS_PSDMR			0x822a48a3 */	/* relaxed */
+#define CONFIG_SYS_PSRT			0x1a
 
 /* "bad" address */
-#define	CFG_RESET_ADDRESS		0x40000000
+#define	CONFIG_SYS_RESET_ADDRESS		0x40000000
 
 #endif	/* __CONFIG_H */
diff --git a/include/configs/W7OLMC.h b/include/configs/W7OLMC.h
index bb6b6b9d2..51d0a0a6a 100644
--- a/include/configs/W7OLMC.h
+++ b/include/configs/W7OLMC.h
@@ -63,8 +63,9 @@
 #define CONFIG_SERVERIP		192.168.1.2
 
 #define CONFIG_LOADS_ECHO	1		/* echo on for serial download	*/
-#undef CFG_LOADS_BAUD_CHANGE			/* disallow baudrate change	*/
+#undef CONFIG_SYS_LOADS_BAUD_CHANGE			/* disallow baudrate change	*/
 
+#define CONFIG_PPC4xx_EMAC
 #define CONFIG_MII		1		/* MII PHY management		*/
 #define CONFIG_PHY_ADDR		0		/* PHY address			*/
 
@@ -104,38 +105,38 @@
 /*
  * Miscellaneous configurable options
  */
-#define CFG_LONGHELP				/* undef to save memory		*/
-#define CFG_PROMPT		"Wave7Optics> " /* Monitor Command Prompt	*/
-#undef  CFG_HUSH_PARSER				/* No hush parse for U-Boot       */
-#ifdef  CFG_HUSH_PARSER
-#define CFG_PROMPT_HUSH_PS2     "> "
+#define CONFIG_SYS_LONGHELP				/* undef to save memory		*/
+#define CONFIG_SYS_PROMPT		"Wave7Optics> " /* Monitor Command Prompt	*/
+#undef  CONFIG_SYS_HUSH_PARSER				/* No hush parse for U-Boot       */
+#ifdef  CONFIG_SYS_HUSH_PARSER
+#define CONFIG_SYS_PROMPT_HUSH_PS2     "> "
 #endif
 #if defined(CONFIG_CMD_KGDB)
-#define CFG_CBSIZE		1024		/* Console I/O Buffer Size	*/
+#define CONFIG_SYS_CBSIZE		1024		/* Console I/O Buffer Size	*/
 #else
-#define CFG_CBSIZE		256		/* Console I/O Buffer Size	*/
+#define CONFIG_SYS_CBSIZE		256		/* Console I/O Buffer Size	*/
 #endif
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size	*/
-#define CFG_MAXARGS		16		/* max number of command args	*/
-#define CFG_BARGSIZE		CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size	*/
+#define CONFIG_SYS_MAXARGS		16		/* max number of command args	*/
+#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
 
-#define CFG_MEMTEST_START	0x0400000	/* memtest works on		*/
-#define CFG_MEMTEST_END		0x0C00000	/* 4 ... 12 MB in DRAM		*/
+#define CONFIG_SYS_MEMTEST_START	0x0400000	/* memtest works on		*/
+#define CONFIG_SYS_MEMTEST_END		0x0C00000	/* 4 ... 12 MB in DRAM		*/
 
-#undef  CFG_EXT_SERIAL_CLOCK			/* external serial clock */
-#define CFG_405_UART_ERRATA_59			/* 405GP/CR Rev. D silicon */
-#define CFG_BASE_BAUD		384000
+#undef  CONFIG_SYS_EXT_SERIAL_CLOCK			/* external serial clock */
+#define CONFIG_SYS_405_UART_ERRATA_59			/* 405GP/CR Rev. D silicon */
+#define CONFIG_SYS_BASE_BAUD		384000
 
 
 /* The following table includes the supported baudrates */
-#define CFG_BAUDRATE_TABLE	{9600}
+#define CONFIG_SYS_BAUDRATE_TABLE	{9600}
 
-#define CFG_CLKS_IN_HZ		1		/* everything, incl board info, in Hz */
+#define CONFIG_SYS_CLKS_IN_HZ		1		/* everything, incl board info, in Hz */
 
-#define CFG_LOAD_ADDR		0x100000	/* default load address		*/
-#define CFG_EXTBDINFO		1		/* use extended board_info (bd_t) */
+#define CONFIG_SYS_LOAD_ADDR		0x100000	/* default load address		*/
+#define CONFIG_SYS_EXTBDINFO		1		/* use extended board_info (bd_t) */
 
-#define CFG_HZ			1000		/* decrementer freq: 1 ms ticks */
+#define CONFIG_SYS_HZ			1000		/* decrementer freq: 1 ms ticks */
 
 /*-----------------------------------------------------------------------
  * PCI stuff
@@ -150,14 +151,14 @@
 #define CONFIG_PCI_HOST		PCI_HOST_AUTO	/* select pci host function	*/
 #define CONFIG_PCI_PNP				/* pci plug-and-play		*/
 /* resource configuration	*/
-#define CFG_PCI_SUBSYS_VENDORID 0x1014		/* PCI Vendor ID: IBM		*/
-#define CFG_PCI_SUBSYS_DEVICEID 0x0156		/* PCI Device ID: 405GP		*/
-#define CFG_PCI_PTM1LA		0x00000000	/* point to sdram		*/
-#define CFG_PCI_PTM1MS		0x80000001	/* 2GB, enable hard-wired to 1	*/
-#define CFG_PCI_PTM1PCI		0x00000000      /* Host: use this pci address   */
-#define CFG_PCI_PTM2LA		0x00000000	/* disabled			*/
-#define CFG_PCI_PTM2MS		0x00000000	/* disabled			*/
-#define CFG_PCI_PTM2PCI		0x00000000      /* Host: use this pci address   */
+#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x1014		/* PCI Vendor ID: IBM		*/
+#define CONFIG_SYS_PCI_SUBSYS_DEVICEID 0x0156		/* PCI Device ID: 405GP		*/
+#define CONFIG_SYS_PCI_PTM1LA		0x00000000	/* point to sdram		*/
+#define CONFIG_SYS_PCI_PTM1MS		0x80000001	/* 2GB, enable hard-wired to 1	*/
+#define CONFIG_SYS_PCI_PTM1PCI		0x00000000      /* Host: use this pci address   */
+#define CONFIG_SYS_PCI_PTM2LA		0x00000000	/* disabled			*/
+#define CONFIG_SYS_PCI_PTM2MS		0x00000000	/* disabled			*/
+#define CONFIG_SYS_PCI_PTM2PCI		0x00000000      /* Host: use this pci address   */
 
 /*-----------------------------------------------------------------------
  * Set up values for external bus controller
@@ -168,122 +169,121 @@
 #undef CONFIG_USE_PERWE
 
 /* use on chip memory ( OCM ) for temperary stack until sdram is tested */
-#define CFG_TEMP_STACK_OCM        1
+#define CONFIG_SYS_TEMP_STACK_OCM        1
 
 /* bank 0 is boot flash */
 /* BME=0,TWT=6,CSN=1,OEN=1,WBN=0,WBF=0,TH=2,RE=0,SOR=0,BEM=1,PEN=0 */
-#define CFG_W7O_EBC_PB0AP   0x03050440
+#define CONFIG_SYS_W7O_EBC_PB0AP   0x03050440
 /* BAS=0xFFE,BS=0x1(2MB),BU=0x3(R/W),BW=0x0(8 bits) */
-#define CFG_W7O_EBC_PB0CR   0xFFE38000
+#define CONFIG_SYS_W7O_EBC_PB0CR   0xFFE38000
 
 /* bank 1 is main flash */
 /* BME=0,TWT=11,CSN=1,OEN=1,WBN=0,WBF=0,TH=1,RE=0,SOR=0,BEM=1,PEN=0 */
-#define CFG_EBC_PB1AP   0x05850240
+#define CONFIG_SYS_EBC_PB1AP   0x05850240
 /* BAS=0xF00,BS=0x7(128MB),BU=0x3(R/W),BW=0x10(32 bits) */
-#define CFG_EBC_PB1CR   0xF00FC000
+#define CONFIG_SYS_EBC_PB1CR   0xF00FC000
 
 /* bank 2 is RTC/NVRAM */
 /* BME=0,TWT=6,CSN=0,OEN=0,WBN=0,WBF=0,TH=2,RE=0,SOR=0,BEM=1,PEN=0 */
-#define CFG_EBC_PB2AP   0x03000440
+#define CONFIG_SYS_EBC_PB2AP   0x03000440
 /* BAS=0xFC0,BS=0x0(1MB),BU=0x3(R/W),BW=0x0(8 bits) */
-#define CFG_EBC_PB2CR   0xFC018000
+#define CONFIG_SYS_EBC_PB2CR   0xFC018000
 
 /* bank 3 is FPGA 0 */
 /* BME=0,TWT=4,CSN=0,OEN=0,WBN=0,WBF=0,TH=2,RE=0,SOR=0,BEM=0,PEN=0 */
-#define CFG_EBC_PB3AP   0x02000400
+#define CONFIG_SYS_EBC_PB3AP   0x02000400
 /* BAS=0xFD0,BS=0x0(1MB),BU=0x3(R/W),BW=0x1(16 bits) */
-#define CFG_EBC_PB3CR   0xFD01A000
+#define CONFIG_SYS_EBC_PB3CR   0xFD01A000
 
 /* bank 4 is FPGA 1 */
 /* BME=,TWT=,CSN=,OEN=,WBN=,WBF=,TH=,RE=,SOR=,BEM=,PEN= */
-#define CFG_EBC_PB4AP   0x02000400
+#define CONFIG_SYS_EBC_PB4AP   0x02000400
 /* BAS=,BS=,BU=0x3(R/W),BW=0x0(8 bits) */
-#define CFG_EBC_PB4CR   0xFD11A000
+#define CONFIG_SYS_EBC_PB4CR   0xFD11A000
 
 /* bank 5 is FPGA 2 */
 /* BME=,TWT=,CSN=,OEN=,WBN=,WBF=,TH=,RE=,SOR=,BEM=,PEN= */
-#define CFG_EBC_PB5AP   0x02000400
+#define CONFIG_SYS_EBC_PB5AP   0x02000400
 /* BAS=,BS=,BU=0x3(R/W),BW=0x1(16 bits) */
-#define CFG_EBC_PB5CR   0xFD21A000
+#define CONFIG_SYS_EBC_PB5CR   0xFD21A000
 
 /* bank 6 is unused */
 /* pb6ap = 0 */
-#define CFG_EBC_PB6AP   0x00000000
+#define CONFIG_SYS_EBC_PB6AP   0x00000000
 /* pb6cr = 0 */
-#define CFG_EBC_PB6CR   0x00000000
+#define CONFIG_SYS_EBC_PB6CR   0x00000000
 
 /* bank 7 is LED register */
 /* BME=0,TWT=6,CSN=1,OEN=1,WBN=0,WBF=0,TH=2,RE=0,SOR=0,BEM=1,PEN=0 */
-#define CFG_W7O_EBC_PB7AP   0x03050440
+#define CONFIG_SYS_W7O_EBC_PB7AP   0x03050440
 /* BAS=0xFE0,BS=0x0(1MB),BU=0x3(R/W),BW=0x2(32 bits) */
-#define CFG_W7O_EBC_PB7CR   0xFE01C000
+#define CONFIG_SYS_W7O_EBC_PB7CR   0xFE01C000
 
 /*-----------------------------------------------------------------------
  * Start addresses for the final memory configuration
  * (Set up by the startup code)
- * Please note that CFG_SDRAM_BASE _must_ start at 0
+ * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
  */
-#define CFG_SDRAM_BASE		0x00000000
-#define CFG_FLASH_BASE		0xFFFC0000
-#define CFG_MONITOR_BASE	CFG_FLASH_BASE
-#define CFG_MONITOR_LEN		(256 * 1024)	/* Reserve 256 kB for Monitor	*/
-#define CFG_MALLOC_LEN		(128 * 1024)	/* Reserve 128 kB for malloc()	*/
+#define CONFIG_SYS_SDRAM_BASE		0x00000000
+#define CONFIG_SYS_FLASH_BASE		0xFFFC0000
+#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_FLASH_BASE
+#define CONFIG_SYS_MONITOR_LEN		(256 * 1024)	/* Reserve 256 kB for Monitor	*/
+#define CONFIG_SYS_MALLOC_LEN		(128 * 1024)	/* Reserve 128 kB for malloc()	*/
 
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
+#define CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
 /*-----------------------------------------------------------------------
  * FLASH organization
  */
-#define CFG_MAX_FLASH_BANKS	2		/* max number of memory banks	*/
-#define CFG_MAX_FLASH_SECT	256		/* max number of sec on 1 chip	*/
+#define CONFIG_SYS_MAX_FLASH_BANKS	2		/* max number of memory banks	*/
+#define CONFIG_SYS_MAX_FLASH_SECT	256		/* max number of sec on 1 chip	*/
 
-#define CFG_FLASH_ERASE_TOUT	120000		/* Timeout, Flash Erase, in ms	*/
-#define CFG_FLASH_WRITE_TOUT	500		/* Timeout, Flash Write, in ms	*/
-#define CFG_FLASH_PROTECTION	1		/* Use real Flash protection	*/
+#define CONFIG_SYS_FLASH_ERASE_TOUT	120000		/* Timeout, Flash Erase, in ms	*/
+#define CONFIG_SYS_FLASH_WRITE_TOUT	500		/* Timeout, Flash Write, in ms	*/
+#define CONFIG_SYS_FLASH_PROTECTION	1		/* Use real Flash protection	*/
 
 #if 1 /* Use NVRAM for environment variables */
 /*-----------------------------------------------------------------------
  * NVRAM organization
  */
-#define CFG_ENV_IS_IN_NVRAM	1		/* use NVRAM for env vars	*/
-#define CFG_NVRAM_BASE_ADDR	0xfc000000	/* NVRAM base address		*/
-#define CFG_NVRAM_SIZE		(32*1024)	/* NVRAM size			*/
-#define CFG_ENV_SIZE		0x1000		/* Size of Environment vars	*/
-/*define CFG_ENV_ADDR		 \
-	(CFG_NVRAM_BASE_ADDR+CFG_NVRAM_SIZE-CFG_ENV_SIZE) Env  */
-#define CFG_ENV_ADDR		CFG_NVRAM_BASE_ADDR
+#define CONFIG_ENV_IS_IN_NVRAM	1		/* use NVRAM for env vars	*/
+#define CONFIG_SYS_NVRAM_BASE_ADDR	0xfc000000	/* NVRAM base address		*/
+#define CONFIG_SYS_NVRAM_SIZE		(32*1024)	/* NVRAM size			*/
+#define CONFIG_ENV_SIZE		0x1000		/* Size of Environment vars	*/
+/*define CONFIG_ENV_ADDR		 \
+	(CONFIG_SYS_NVRAM_BASE_ADDR+CONFIG_SYS_NVRAM_SIZE-CONFIG_ENV_SIZE) Env  */
+#define CONFIG_ENV_ADDR		CONFIG_SYS_NVRAM_BASE_ADDR
 
 #else /* Use Boot Flash for environment variables */
 /*-----------------------------------------------------------------------
  * Flash EEPROM for environment
  */
-#define CFG_ENV_IS_IN_FLASH 1
-#define CFG_ENV_OFFSET		0x00040000	/* Offset of Environment Sector */
-#define CFG_ENV_SIZE		0x10000		/* Total Size of env. sector	*/
+#define CONFIG_ENV_IS_IN_FLASH 1
+#define CONFIG_ENV_OFFSET		0x00040000	/* Offset of Environment Sector */
+#define CONFIG_ENV_SIZE		0x10000		/* Total Size of env. sector	*/
 
-#define CFG_ENV_SECT_SIZE	0x10000		/* see README - env sec tot sze */
+#define CONFIG_ENV_SECT_SIZE	0x10000		/* see README - env sec tot sze */
 #endif
 
 /*-----------------------------------------------------------------------
  * I2C EEPROM (CAT24WC08) for environment
  */
 #define CONFIG_HARD_I2C			/* I2c with hardware support */
-#define CFG_I2C_SPEED		400000	/* I2C speed and slave address */
-#define CFG_I2C_SLAVE		0x7F
+#define CONFIG_SYS_I2C_SPEED		400000	/* I2C speed and slave address */
+#define CONFIG_SYS_I2C_SLAVE		0x7F
 
-#define CFG_I2C_EEPROM_ADDR	0x50	/* EEPROM CAT28WC08		*/
-#define CFG_I2C_EEPROM_ADDR_LEN	1	/* Bytes of address		*/
+#define CONFIG_SYS_I2C_EEPROM_ADDR	0x50	/* EEPROM CAT28WC08		*/
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN	1	/* Bytes of address		*/
 /* mask of address bits that overflow into the "EEPROM chip address"    */
-#define CFG_I2C_EEPROM_ADDR_OVERFLOW	0x07
-#define CFG_EEPROM_PAGE_WRITE_ENABLE
-#define CFG_EEPROM_PAGE_WRITE_BITS 4	/* The Catalyst CAT24WC08 has	*/
+#define CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW	0x07
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 4	/* The Catalyst CAT24WC08 has	*/
 					/* 16 byte page write mode using*/
 					/* last	4 bits of the address	*/
-#define CFG_I2C_MULTI_EEPROMS
+#define CONFIG_SYS_I2C_MULTI_EEPROMS
 /*-----------------------------------------------------------------------
  * Definitions for Serial Presence Detect EEPROM address
  * (to get SDRAM settings)
@@ -297,17 +297,17 @@
 #define FLASH_BASE1_PRELIM	0xF0000000	/* FLASH bank #1		*/
 
 /* On Chip Memory location */
-#define CFG_OCM_DATA_ADDR	0xF8000000
-#define CFG_OCM_DATA_SIZE	0x1000
+#define CONFIG_SYS_OCM_DATA_ADDR	0xF8000000
+#define CONFIG_SYS_OCM_DATA_SIZE	0x1000
 
 /*-----------------------------------------------------------------------
  * Definitions for initial stack pointer and data area (in RAM)
  */
-#define CFG_INIT_RAM_ADDR	CFG_OCM_DATA_ADDR /* inside of SDRAM		*/
-#define CFG_INIT_RAM_END	CFG_OCM_DATA_SIZE /* End of used area in RAM	*/
-#define CFG_GBL_DATA_SIZE	64		/* size in bytes reserved for initial data */
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_OCM_DATA_ADDR /* inside of SDRAM		*/
+#define CONFIG_SYS_INIT_RAM_END	CONFIG_SYS_OCM_DATA_SIZE /* End of used area in RAM	*/
+#define CONFIG_SYS_GBL_DATA_SIZE	64		/* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
 
 /*
@@ -326,7 +326,7 @@
 /*
  * FPGA(s) configuration
  */
-#define CFG_FPGA_IMAGE_LEN	0x80000		/* 512KB FPGA image		*/
+#define CONFIG_SYS_FPGA_IMAGE_LEN	0x80000		/* 512KB FPGA image		*/
 #define CONFIG_NUM_FPGAS	3		/* Number of FPGAs on board	*/
 #define CONFIG_MAX_FPGAS	6		/* Maximum number of FPGAs	*/
 #define CONFIG_FPGAS_BASE	0xFD000000L	/* Base address of FPGAs	*/
diff --git a/include/configs/W7OLMG.h b/include/configs/W7OLMG.h
index 3050cafa1..ca1a9d4a7 100644
--- a/include/configs/W7OLMG.h
+++ b/include/configs/W7OLMG.h
@@ -63,17 +63,18 @@
 #define CONFIG_SERVERIP		192.168.1.2
 
 #define CONFIG_LOADS_ECHO	1		/* echo on for serial download	*/
-#undef CFG_LOADS_BAUD_CHANGE			/* disallow baudrate change	*/
+#undef CONFIG_SYS_LOADS_BAUD_CHANGE			/* disallow baudrate change	*/
 
+#define CONFIG_PPC4xx_EMAC
 #define CONFIG_MII		1		/* MII PHY management		*/
 #define CONFIG_PHY_ADDR		0		/* PHY address			*/
 
 #define CONFIG_RTC_M48T35A	1		/* ST Electronics M48 timekeeper */
 #define CONFIG_DTT_LM75     1                /* ON Semi's LM75 */
 #define CONFIG_DTT_SENSORS  {2, 4}           /* Sensor addresses */
-#define CFG_DTT_MAX_TEMP	70
-#define CFG_DTT_LOW_TEMP	-30
-#define CFG_DTT_HYSTERESIS	3
+#define CONFIG_SYS_DTT_MAX_TEMP	70
+#define CONFIG_SYS_DTT_LOW_TEMP	-30
+#define CONFIG_SYS_DTT_HYSTERESIS	3
 
 
 /*
@@ -112,38 +113,38 @@
 /*
  * Miscellaneous configurable options
  */
-#define CFG_LONGHELP				/* undef to save memory		*/
-#define CFG_PROMPT		"Wave7Optics> " /* Monitor Command Prompt	*/
-#undef  CFG_HUSH_PARSER				/* No hush parse for U-Boot       */
-#ifdef  CFG_HUSH_PARSER
-#define CFG_PROMPT_HUSH_PS2     "> "
+#define CONFIG_SYS_LONGHELP				/* undef to save memory		*/
+#define CONFIG_SYS_PROMPT		"Wave7Optics> " /* Monitor Command Prompt	*/
+#undef  CONFIG_SYS_HUSH_PARSER				/* No hush parse for U-Boot       */
+#ifdef  CONFIG_SYS_HUSH_PARSER
+#define CONFIG_SYS_PROMPT_HUSH_PS2     "> "
 #endif
 #if defined(CONFIG_CMD_KGDB)
-#define CFG_CBSIZE		1024		/* Console I/O Buffer Size	*/
+#define CONFIG_SYS_CBSIZE		1024		/* Console I/O Buffer Size	*/
 #else
-#define CFG_CBSIZE		256		/* Console I/O Buffer Size	*/
+#define CONFIG_SYS_CBSIZE		256		/* Console I/O Buffer Size	*/
 #endif
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size	*/
-#define CFG_MAXARGS		16		/* max number of command args	*/
-#define CFG_BARGSIZE		CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size	*/
+#define CONFIG_SYS_MAXARGS		16		/* max number of command args	*/
+#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
 
-#define CFG_MEMTEST_START	0x0400000	/* memtest works on		*/
-#define CFG_MEMTEST_END		0x0C00000	/* 4 ... 12 MB in DRAM		*/
+#define CONFIG_SYS_MEMTEST_START	0x0400000	/* memtest works on		*/
+#define CONFIG_SYS_MEMTEST_END		0x0C00000	/* 4 ... 12 MB in DRAM		*/
 
-#undef  CFG_EXT_SERIAL_CLOCK			/* external serial clock */
-#define CFG_405_UART_ERRATA_59			/* 405GP/CR Rev. D silicon */
-#define CFG_BASE_BAUD		384000
+#undef  CONFIG_SYS_EXT_SERIAL_CLOCK			/* external serial clock */
+#define CONFIG_SYS_405_UART_ERRATA_59			/* 405GP/CR Rev. D silicon */
+#define CONFIG_SYS_BASE_BAUD		384000
 
 
 /* The following table includes the supported baudrates */
-#define CFG_BAUDRATE_TABLE	{9600}
+#define CONFIG_SYS_BAUDRATE_TABLE	{9600}
 
-#define CFG_CLKS_IN_HZ		1		/* everything, incl board info, in Hz */
+#define CONFIG_SYS_CLKS_IN_HZ		1		/* everything, incl board info, in Hz */
 
-#define CFG_LOAD_ADDR		0x100000	/* default load address		*/
-#define CFG_EXTBDINFO		1		/* use extended board_info (bd_t) */
+#define CONFIG_SYS_LOAD_ADDR		0x100000	/* default load address		*/
+#define CONFIG_SYS_EXTBDINFO		1		/* use extended board_info (bd_t) */
 
-#define CFG_HZ			1000		/* decrementer freq: 1 ms ticks */
+#define CONFIG_SYS_HZ			1000		/* decrementer freq: 1 ms ticks */
 
 /*-----------------------------------------------------------------------
  * PCI stuff
@@ -157,14 +158,14 @@
 #define CONFIG_PCI_HOST		PCI_HOST_AUTO	/* select pci host function	*/
 #define CONFIG_PCI_PNP				/* pci plug-and-play		*/
 /* resource configuration	*/
-#define CFG_PCI_SUBSYS_VENDORID 0x1014		/* PCI Vendor ID: IBM		*/
-#define CFG_PCI_SUBSYS_DEVICEID 0x0156		/* PCI Device ID: 405GP		*/
-#define CFG_PCI_PTM1LA		0x00000000	/* point to sdram		*/
-#define CFG_PCI_PTM1MS		0x80000001	/* 2GB, enable hard-wired to 1	*/
-#define CFG_PCI_PTM1PCI		0x00000000      /* Host: use this pci address   */
-#define CFG_PCI_PTM2LA		0x00000000	/* disabled			*/
-#define CFG_PCI_PTM2MS		0x00000000	/* disabled			*/
-#define CFG_PCI_PTM2PCI		0x00000000      /* Host: use this pci address   */
+#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x1014		/* PCI Vendor ID: IBM		*/
+#define CONFIG_SYS_PCI_SUBSYS_DEVICEID 0x0156		/* PCI Device ID: 405GP		*/
+#define CONFIG_SYS_PCI_PTM1LA		0x00000000	/* point to sdram		*/
+#define CONFIG_SYS_PCI_PTM1MS		0x80000001	/* 2GB, enable hard-wired to 1	*/
+#define CONFIG_SYS_PCI_PTM1PCI		0x00000000      /* Host: use this pci address   */
+#define CONFIG_SYS_PCI_PTM2LA		0x00000000	/* disabled			*/
+#define CONFIG_SYS_PCI_PTM2MS		0x00000000	/* disabled			*/
+#define CONFIG_SYS_PCI_PTM2PCI		0x00000000      /* Host: use this pci address   */
 
 /*-----------------------------------------------------------------------
  * Set up values for external bus controller
@@ -175,118 +176,117 @@
 #define CONFIG_USE_PERWE 1
 
 /* use on chip memory ( OCM ) for temperary stack until sdram is tested */
-#define CFG_TEMP_STACK_OCM        1
+#define CONFIG_SYS_TEMP_STACK_OCM        1
 
 /* bank 0 is boot flash */
 /* BME=0,TWT=6,CSN=1,OEN=1,WBN=0,WBF=0,TH=2,RE=0,SOR=0,BEM=1,PEN=0 */
-#define CFG_W7O_EBC_PB0AP   0x03050440
+#define CONFIG_SYS_W7O_EBC_PB0AP   0x03050440
 /* BAS=0xFFE,BS=0x1(2MB),BU=0x3(R/W),BW=0x0(8 bits) */
-#define CFG_W7O_EBC_PB0CR   0xFFE38000
+#define CONFIG_SYS_W7O_EBC_PB0CR   0xFFE38000
 
 /* bank 1 is main flash */
 /* BME=0,TWT=9,CSN=1,OEN=1,WBN=0,WBF=0,TH=1,RE=0,SOR=0,BEM=1,PEN=0 */
-#define CFG_EBC_PB1AP   0x04850240
+#define CONFIG_SYS_EBC_PB1AP   0x04850240
 /* BAS=0xF00,BS=0x7(128MB),BU=0x3(R/W),BW=0x10(32 bits) */
-#define CFG_EBC_PB1CR   0xF00FC000
+#define CONFIG_SYS_EBC_PB1CR   0xF00FC000
 
 /* bank 2 is RTC/NVRAM */
 /* BME=0,TWT=6,CSN=0,OEN=0,WBN=0,WBF=0,TH=2,RE=0,SOR=0,BEM=1,PEN=0 */
-#define CFG_EBC_PB2AP   0x03000440
+#define CONFIG_SYS_EBC_PB2AP   0x03000440
 /* BAS=0xFC0,BS=0x0(1MB),BU=0x3(R/W),BW=0x0(8 bits) */
-#define CFG_EBC_PB2CR   0xFC018000
+#define CONFIG_SYS_EBC_PB2CR   0xFC018000
 
 /* bank 3 is FPGA 0 */
 /* BME=0,TWT=4,CSN=0,OEN=0,WBN=0,WBF=0,TH=2,RE=0,SOR=0,BEM=0,PEN=0 */
-#define CFG_EBC_PB3AP   0x02000400
+#define CONFIG_SYS_EBC_PB3AP   0x02000400
 /* BAS=0xFD0,BS=0x0(1MB),BU=0x3(R/W),BW=0x1(16 bits) */
-#define CFG_EBC_PB3CR   0xFD01A000
+#define CONFIG_SYS_EBC_PB3CR   0xFD01A000
 
 /* bank 4 is SAM 8 bit range */
 /* BME=,TWT=,CSN=,OEN=,WBN=,WBF=,TH=,RE=,SOR=,BEM=,PEN= */
-#define CFG_EBC_PB4AP   0x02840380
+#define CONFIG_SYS_EBC_PB4AP   0x02840380
 /* BAS=,BS=,BU=0x3(R/W),BW=0x0(8 bits) */
-#define CFG_EBC_PB4CR   0xFE878000
+#define CONFIG_SYS_EBC_PB4CR   0xFE878000
 
 /* bank 5 is SAM 16 bit range */
 /* BME=0,TWT=10,CSN=2,OEN=0,WBN=0,WBF=0,TH=6,RE=1,SOR=1,BEM=0,PEN=0 */
-#define CFG_EBC_PB5AP   0x05040d80
+#define CONFIG_SYS_EBC_PB5AP   0x05040d80
 /* BAS=,BS=,BU=0x3(R/W),BW=0x1(16 bits) */
-#define CFG_EBC_PB5CR   0xFD87A000
+#define CONFIG_SYS_EBC_PB5CR   0xFD87A000
 
 /* bank 6 is unused */
 /* pb6ap = 0 */
-#define CFG_EBC_PB6AP   0x00000000
+#define CONFIG_SYS_EBC_PB6AP   0x00000000
 /* pb6cr = 0 */
-#define CFG_EBC_PB6CR   0x00000000
+#define CONFIG_SYS_EBC_PB6CR   0x00000000
 
 /* bank 7 is LED register */
 /* BME=0,TWT=6,CSN=1,OEN=1,WBN=0,WBF=0,TH=2,RE=0,SOR=0,BEM=1,PEN=0 */
-#define CFG_W7O_EBC_PB7AP   0x03050440
+#define CONFIG_SYS_W7O_EBC_PB7AP   0x03050440
 /* BAS=0xFE0,BS=0x0(1MB),BU=0x3(R/W),BW=0x2(32 bits) */
-#define CFG_W7O_EBC_PB7CR   0xFE01C000
+#define CONFIG_SYS_W7O_EBC_PB7CR   0xFE01C000
 
 /*-----------------------------------------------------------------------
  * Start addresses for the final memory configuration
  * (Set up by the startup code)
- * Please note that CFG_SDRAM_BASE _must_ start at 0
+ * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
  */
-#define CFG_SDRAM_BASE		0x00000000
-#define CFG_FLASH_BASE		0xFFFC0000
-#define CFG_MONITOR_BASE	CFG_FLASH_BASE
-#define CFG_MONITOR_LEN		(256 * 1024)	/* Reserve 196 kB for Monitor	*/
-#define CFG_MALLOC_LEN		(128 * 1024)	/* Reserve 128 kB for malloc()	*/
+#define CONFIG_SYS_SDRAM_BASE		0x00000000
+#define CONFIG_SYS_FLASH_BASE		0xFFFC0000
+#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_FLASH_BASE
+#define CONFIG_SYS_MONITOR_LEN		(256 * 1024)	/* Reserve 196 kB for Monitor	*/
+#define CONFIG_SYS_MALLOC_LEN		(128 * 1024)	/* Reserve 128 kB for malloc()	*/
 
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
+#define CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
 /*-----------------------------------------------------------------------
  * FLASH organization
  */
-#define CFG_MAX_FLASH_BANKS	2		/* max number of memory banks	*/
-#define CFG_MAX_FLASH_SECT	256		/* max number of sec on 1 chip	*/
+#define CONFIG_SYS_MAX_FLASH_BANKS	2		/* max number of memory banks	*/
+#define CONFIG_SYS_MAX_FLASH_SECT	256		/* max number of sec on 1 chip	*/
 
-#define CFG_FLASH_ERASE_TOUT	120000		/* Timeout, Flash Erase, in ms	*/
-#define CFG_FLASH_WRITE_TOUT	500		/* Timeout, Flash Write, in ms	*/
-#define CFG_FLASH_PROTECTION	1		/* Use real Flash protection	*/
+#define CONFIG_SYS_FLASH_ERASE_TOUT	120000		/* Timeout, Flash Erase, in ms	*/
+#define CONFIG_SYS_FLASH_WRITE_TOUT	500		/* Timeout, Flash Write, in ms	*/
+#define CONFIG_SYS_FLASH_PROTECTION	1		/* Use real Flash protection	*/
 
 #if 1 /* Use NVRAM for environment variables */
 /*-----------------------------------------------------------------------
  * NVRAM organization
  */
-#define CFG_ENV_IS_IN_NVRAM	1		/* use NVRAM for env vars	*/
-#define CFG_NVRAM_BASE_ADDR	0xfc000000	/* NVRAM base address		*/
-#define CFG_NVRAM_SIZE		(32*1024)	/* NVRAM size			*/
-#define CFG_ENV_SIZE		0x1000		/* Size of Environment vars	*/
-/*define CFG_ENV_ADDR		 \
-	(CFG_NVRAM_BASE_ADDR+CFG_NVRAM_SIZE-CFG_ENV_SIZE) Env  */
-#define CFG_ENV_ADDR		CFG_NVRAM_BASE_ADDR
+#define CONFIG_ENV_IS_IN_NVRAM	1		/* use NVRAM for env vars	*/
+#define CONFIG_SYS_NVRAM_BASE_ADDR	0xfc000000	/* NVRAM base address		*/
+#define CONFIG_SYS_NVRAM_SIZE		(32*1024)	/* NVRAM size			*/
+#define CONFIG_ENV_SIZE		0x1000		/* Size of Environment vars	*/
+/*define CONFIG_ENV_ADDR		 \
+	(CONFIG_SYS_NVRAM_BASE_ADDR+CONFIG_SYS_NVRAM_SIZE-CONFIG_ENV_SIZE) Env  */
+#define CONFIG_ENV_ADDR		CONFIG_SYS_NVRAM_BASE_ADDR
 
 #else /* Use Boot Flash for environment variables */
 /*-----------------------------------------------------------------------
  * Flash EEPROM for environment
  */
-#define CFG_ENV_IS_IN_FLASH 1
-#define CFG_ENV_OFFSET		0x00040000	/* Offset of Environment Sector */
-#define CFG_ENV_SIZE		0x10000		/* Total Size of env. sector	*/
+#define CONFIG_ENV_IS_IN_FLASH 1
+#define CONFIG_ENV_OFFSET		0x00040000	/* Offset of Environment Sector */
+#define CONFIG_ENV_SIZE		0x10000		/* Total Size of env. sector	*/
 
-#define CFG_ENV_SECT_SIZE	0x10000		/* see README - env sec tot sze */
+#define CONFIG_ENV_SECT_SIZE	0x10000		/* see README - env sec tot sze */
 #endif
 
 /*-----------------------------------------------------------------------
  * I2C EEPROM (ATMEL 24C04N)
  */
 #define CONFIG_HARD_I2C		1		/* Hardware assisted I2C	*/
-#define CFG_I2C_SPEED		400000		/* I2C speed and slave address */
-#define CFG_I2C_SLAVE		0x7F
-
-#define CFG_I2C_EEPROM_ADDR	0x50		/* EEPROM ATMEL 24C04N		*/
-#define CFG_I2C_EEPROM_ADDR_LEN	1		/* Bytes of address		*/
-#define CFG_EEPROM_PAGE_WRITE_ENABLE
-#define CFG_EEPROM_PAGE_WRITE_BITS 3
-#define CFG_I2C_MULTI_EEPROMS
+#define CONFIG_SYS_I2C_SPEED		400000		/* I2C speed and slave address */
+#define CONFIG_SYS_I2C_SLAVE		0x7F
+
+#define CONFIG_SYS_I2C_EEPROM_ADDR	0x50		/* EEPROM ATMEL 24C04N		*/
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN	1		/* Bytes of address		*/
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
+#define CONFIG_SYS_I2C_MULTI_EEPROMS
 /*-----------------------------------------------------------------------
  * Definitions for Serial Presence Detect EEPROM address
  * (to get SDRAM settings)
@@ -300,17 +300,17 @@
 #define FLASH_BASE1_PRELIM	0xF0000000	/* FLASH bank #1		*/
 
 /* On Chip Memory location */
-#define CFG_OCM_DATA_ADDR	0xF8000000
-#define CFG_OCM_DATA_SIZE	0x1000
+#define CONFIG_SYS_OCM_DATA_ADDR	0xF8000000
+#define CONFIG_SYS_OCM_DATA_SIZE	0x1000
 
 /*-----------------------------------------------------------------------
  * Definitions for initial stack pointer and data area (in RAM)
  */
-#define CFG_INIT_RAM_ADDR	CFG_OCM_DATA_ADDR /* inside of SDRAM		*/
-#define CFG_INIT_RAM_END	CFG_OCM_DATA_SIZE /* End of used area in RAM	*/
-#define CFG_GBL_DATA_SIZE	64		/* size in bytes reserved for initial data */
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_OCM_DATA_ADDR /* inside of SDRAM		*/
+#define CONFIG_SYS_INIT_RAM_END	CONFIG_SYS_OCM_DATA_SIZE /* End of used area in RAM	*/
+#define CONFIG_SYS_GBL_DATA_SIZE	64		/* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
 
 /*
@@ -329,7 +329,7 @@
 /*
  * FPGA(s) configuration
  */
-#define CFG_FPGA_IMAGE_LEN	0x80000		/* 512KB FPGA image		*/
+#define CONFIG_SYS_FPGA_IMAGE_LEN	0x80000		/* 512KB FPGA image		*/
 #define CONFIG_NUM_FPGAS	1		/* Number of FPGAs on board	*/
 #define CONFIG_MAX_FPGAS	6		/* Maximum number of FPGAs	*/
 #define CONFIG_FPGAS_BASE	0xFD000000L	/* Base address of FPGAs	*/
diff --git a/include/configs/WUH405.h b/include/configs/WUH405.h
index 582d8cf86..01cdf3a6f 100644
--- a/include/configs/WUH405.h
+++ b/include/configs/WUH405.h
@@ -52,8 +52,9 @@
 #define CONFIG_PREBOOT                  /* enable preboot variable      */
 
 #define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
-#define CFG_LOADS_BAUD_CHANGE	1	/* allow baudrate change	*/
+#define CONFIG_SYS_LOADS_BAUD_CHANGE	1	/* allow baudrate change	*/
 
+#define CONFIG_PPC4xx_EMAC
 #define CONFIG_MII		1	/* MII PHY management		*/
 #define CONFIG_PHY_ADDR		0	/* PHY address			*/
 #define CONFIG_LXT971_NO_SLEEP  1       /* disable sleep mode in LXT971 */
@@ -89,73 +90,73 @@
 #undef	CONFIG_WATCHDOG			/* watchdog disabled		*/
 
 #define CONFIG_RTC_MC146818		/* DS1685 is MC146818 compatible*/
-#define CFG_RTC_REG_BASE_ADDR	 0xF0000500 /* RTC Base Address		*/
+#define CONFIG_SYS_RTC_REG_BASE_ADDR	 0xF0000500 /* RTC Base Address		*/
 
 #define CONFIG_SDRAM_BANK0	1	/* init onboard SDRAM bank 0	*/
 
 /*
  * Miscellaneous configurable options
  */
-#define CFG_LONGHELP			/* undef to save memory		*/
-#define CFG_PROMPT	"=> "		/* Monitor Command Prompt	*/
+#define CONFIG_SYS_LONGHELP			/* undef to save memory		*/
+#define CONFIG_SYS_PROMPT	"=> "		/* Monitor Command Prompt	*/
 
-#undef	CFG_HUSH_PARSER			/* use "hush" command parser	*/
-#ifdef	CFG_HUSH_PARSER
-#define CFG_PROMPT_HUSH_PS2	"> "
+#undef	CONFIG_SYS_HUSH_PARSER			/* use "hush" command parser	*/
+#ifdef	CONFIG_SYS_HUSH_PARSER
+#define CONFIG_SYS_PROMPT_HUSH_PS2	"> "
 #endif
 
 #if defined(CONFIG_CMD_KGDB)
-#define CFG_CBSIZE	1024		/* Console I/O Buffer Size	*/
+#define CONFIG_SYS_CBSIZE	1024		/* Console I/O Buffer Size	*/
 #else
-#define CFG_CBSIZE	256		/* Console I/O Buffer Size	*/
+#define CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size	*/
 #endif
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define CFG_MAXARGS	16		/* max number of command args	*/
-#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS	16		/* max number of command args	*/
+#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
 
-#define CFG_DEVICE_NULLDEV	1	/* include nulldev device	*/
+#define CONFIG_SYS_DEVICE_NULLDEV	1	/* include nulldev device	*/
 
-#define CFG_CONSOLE_INFO_QUIET	1	/* don't print console @ startup*/
+#define CONFIG_SYS_CONSOLE_INFO_QUIET	1	/* don't print console @ startup*/
 
-#define CFG_MEMTEST_START	0x0400000	/* memtest works on	*/
-#define CFG_MEMTEST_END		0x0C00000	/* 4 ... 12 MB in DRAM	*/
+#define CONFIG_SYS_MEMTEST_START	0x0400000	/* memtest works on	*/
+#define CONFIG_SYS_MEMTEST_END		0x0C00000	/* 4 ... 12 MB in DRAM	*/
 
-#undef	CFG_EXT_SERIAL_CLOCK	       /* no external serial clock used */
-#define CFG_IGNORE_405_UART_ERRATA_59	/* ignore ppc405gp errata #59	*/
-#define CFG_BASE_BAUD	    691200
+#undef	CONFIG_SYS_EXT_SERIAL_CLOCK	       /* no external serial clock used */
+#define CONFIG_SYS_IGNORE_405_UART_ERRATA_59	/* ignore ppc405gp errata #59	*/
+#define CONFIG_SYS_BASE_BAUD	    691200
 #define	CONFIG_UART1_CONSOLE		/* define for uart1 as console	*/
 
 /* The following table includes the supported baudrates */
-#define CFG_BAUDRATE_TABLE	\
+#define CONFIG_SYS_BAUDRATE_TABLE	\
 	{ 300, 600, 1200, 2400, 4800, 9600, 19200, 38400,     \
 	 57600, 115200, 230400, 460800, 921600 }
 
-#define CFG_LOAD_ADDR	0x100000	/* default load address */
-#define CFG_EXTBDINFO	1		/* To use extended board_into (bd_t) */
+#define CONFIG_SYS_LOAD_ADDR	0x100000	/* default load address */
+#define CONFIG_SYS_EXTBDINFO	1		/* To use extended board_into (bd_t) */
 
-#define CFG_HZ		1000		/* decrementer freq: 1 ms ticks */
+#define CONFIG_SYS_HZ		1000		/* decrementer freq: 1 ms ticks */
 
 #define CONFIG_ZERO_BOOTDELAY_CHECK	/* check for keypress on bootdelay==0 */
 
 #define CONFIG_VERSION_VARIABLE 1	/* include version env variable */
 
-#define CFG_RX_ETH_BUFFER	16	/* use 16 rx buffer on 405 emac */
+#define CONFIG_SYS_RX_ETH_BUFFER	16	/* use 16 rx buffer on 405 emac */
 
 /*-----------------------------------------------------------------------
  * NAND-FLASH stuff
  *-----------------------------------------------------------------------
  */
-#define CFG_NAND_BASE_LIST	{ CFG_NAND_BASE }
+#define CONFIG_SYS_NAND_BASE_LIST	{ CONFIG_SYS_NAND_BASE }
 #define NAND_MAX_CHIPS          1
-#define CFG_MAX_NAND_DEVICE	1         /* Max number of NAND devices */
+#define CONFIG_SYS_MAX_NAND_DEVICE	1         /* Max number of NAND devices */
 #define NAND_BIG_DELAY_US	25
 
-#define CFG_NAND_CE             (0x80000000 >> 1)   /* our CE is GPIO1  */
-#define CFG_NAND_RDY            (0x80000000 >> 4)   /* our RDY is GPIO4 */
-#define CFG_NAND_CLE            (0x80000000 >> 2)   /* our CLE is GPIO2 */
-#define CFG_NAND_ALE            (0x80000000 >> 3)   /* our ALE is GPIO3 */
+#define CONFIG_SYS_NAND_CE             (0x80000000 >> 1)   /* our CE is GPIO1  */
+#define CONFIG_SYS_NAND_RDY            (0x80000000 >> 4)   /* our RDY is GPIO4 */
+#define CONFIG_SYS_NAND_CLE            (0x80000000 >> 2)   /* our CLE is GPIO2 */
+#define CONFIG_SYS_NAND_ALE            (0x80000000 >> 3)   /* our ALE is GPIO3 */
 
-#define CFG_NAND_SKIP_BAD_DOT_I      1  /* ".i" read skips bad blocks   */
+#define CONFIG_SYS_NAND_SKIP_BAD_DOT_I      1  /* ".i" read skips bad blocks   */
 
 /*-----------------------------------------------------------------------
  * PCI stuff
@@ -172,87 +173,86 @@
 
 #undef	CONFIG_PCI_SCAN_SHOW		/* print pci devices @ startup	*/
 
-#define CFG_PCI_SUBSYS_VENDORID 0x12FE	/* PCI Vendor ID: esd gmbh	*/
-#define CFG_PCI_SUBSYS_DEVICEID 0x0405	/* PCI Device ID: CPCI-405	*/
-#define CFG_PCI_CLASSCODE	0x0b20	/* PCI Class Code: Processor/PPC*/
-#define CFG_PCI_PTM1LA	0x00000000	/* point to sdram		*/
-#define CFG_PCI_PTM1MS	0xfc000001	/* 64MB, enable hard-wired to 1 */
-#define CFG_PCI_PTM1PCI 0x00000000	/* Host: use this pci address	*/
-#define CFG_PCI_PTM2LA	0xffc00000	/* point to flash		*/
-#define CFG_PCI_PTM2MS	0xffc00001	/* 4MB, enable			*/
-#define CFG_PCI_PTM2PCI 0x04000000	/* Host: use this pci address	*/
+#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x12FE	/* PCI Vendor ID: esd gmbh	*/
+#define CONFIG_SYS_PCI_SUBSYS_DEVICEID 0x0405	/* PCI Device ID: CPCI-405	*/
+#define CONFIG_SYS_PCI_CLASSCODE	0x0b20	/* PCI Class Code: Processor/PPC*/
+#define CONFIG_SYS_PCI_PTM1LA	0x00000000	/* point to sdram		*/
+#define CONFIG_SYS_PCI_PTM1MS	0xfc000001	/* 64MB, enable hard-wired to 1 */
+#define CONFIG_SYS_PCI_PTM1PCI 0x00000000	/* Host: use this pci address	*/
+#define CONFIG_SYS_PCI_PTM2LA	0xffc00000	/* point to flash		*/
+#define CONFIG_SYS_PCI_PTM2MS	0xffc00001	/* 4MB, enable			*/
+#define CONFIG_SYS_PCI_PTM2PCI 0x04000000	/* Host: use this pci address	*/
 
 /*-----------------------------------------------------------------------
  * Start addresses for the final memory configuration
  * (Set up by the startup code)
- * Please note that CFG_SDRAM_BASE _must_ start at 0
+ * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
  */
-#define CFG_SDRAM_BASE		0x00000000
-#define CFG_FLASH_BASE		0xFFFC0000
-#define CFG_MONITOR_BASE	CFG_FLASH_BASE
-#define CFG_MONITOR_LEN		(256 * 1024)	/* Reserve 256 kB for Monitor	*/
-#define CFG_MALLOC_LEN		(256 * 1024)	/* Reserve 256 kB for malloc()	*/
+#define CONFIG_SYS_SDRAM_BASE		0x00000000
+#define CONFIG_SYS_FLASH_BASE		0xFFFC0000
+#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_FLASH_BASE
+#define CONFIG_SYS_MONITOR_LEN		(256 * 1024)	/* Reserve 256 kB for Monitor	*/
+#define CONFIG_SYS_MALLOC_LEN		(256 * 1024)	/* Reserve 256 kB for malloc()	*/
 
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
+#define CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
 /*-----------------------------------------------------------------------
  * FLASH organization
  */
-#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
-#define CFG_MAX_FLASH_SECT	256	/* max number of sectors on one chip	*/
+#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
+#define CONFIG_SYS_MAX_FLASH_SECT	256	/* max number of sectors on one chip	*/
 
-#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
-#define CFG_FLASH_WRITE_TOUT	1000	/* Timeout for Flash Write (in ms)	*/
+#define CONFIG_SYS_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
+#define CONFIG_SYS_FLASH_WRITE_TOUT	1000	/* Timeout for Flash Write (in ms)	*/
 
-#define CFG_FLASH_WORD_SIZE	unsigned short	/* flash word size (width)	*/
-#define CFG_FLASH_ADDR0		0x5555	/* 1st address for flash config cycles	*/
-#define CFG_FLASH_ADDR1		0x2AAA	/* 2nd address for flash config cycles	*/
+#define CONFIG_SYS_FLASH_WORD_SIZE	unsigned short	/* flash word size (width)	*/
+#define CONFIG_SYS_FLASH_ADDR0		0x5555	/* 1st address for flash config cycles	*/
+#define CONFIG_SYS_FLASH_ADDR1		0x2AAA	/* 2nd address for flash config cycles	*/
 /*
  * The following defines are added for buggy IOP480 byte interface.
  * All other boards should use the standard values (CPCI405 etc.)
  */
-#define CFG_FLASH_READ0		0x0000	/* 0 is standard			*/
-#define CFG_FLASH_READ1		0x0001	/* 1 is standard			*/
-#define CFG_FLASH_READ2		0x0002	/* 2 is standard			*/
+#define CONFIG_SYS_FLASH_READ0		0x0000	/* 0 is standard			*/
+#define CONFIG_SYS_FLASH_READ1		0x0001	/* 1 is standard			*/
+#define CONFIG_SYS_FLASH_READ2		0x0002	/* 2 is standard			*/
 
-#define CFG_FLASH_EMPTY_INFO		/* print 'E' for empty sector on flinfo */
+#define CONFIG_SYS_FLASH_EMPTY_INFO		/* print 'E' for empty sector on flinfo */
 
 #if 0 /* test-only */
-#define CFG_JFFS2_FIRST_BANK	0	    /* use for JFFS2 */
-#define CFG_JFFS2_NUM_BANKS	1	    /* ! second bank contains U-Boot */
+#define CONFIG_SYS_JFFS2_FIRST_BANK	0	    /* use for JFFS2 */
+#define CONFIG_SYS_JFFS2_NUM_BANKS	1	    /* ! second bank contains U-Boot */
 #endif
 
 /*-----------------------------------------------------------------------
  * Environment Variable setup
  */
-#define CFG_ENV_IS_IN_EEPROM	1	/* use EEPROM for environment vars */
-#define CFG_ENV_OFFSET		0x100	/* environment starts at the beginning of the EEPROM */
-#define CFG_ENV_SIZE		0x700	/* 2048 bytes may be used for env vars*/
+#define CONFIG_ENV_IS_IN_EEPROM	1	/* use EEPROM for environment vars */
+#define CONFIG_ENV_OFFSET		0x100	/* environment starts at the beginning of the EEPROM */
+#define CONFIG_ENV_SIZE		0x700	/* 2048 bytes may be used for env vars*/
 				   /* total size of a CAT24WC16 is 2048 bytes */
 
-#define CFG_NVRAM_BASE_ADDR	0xF0000500		/* NVRAM base address	*/
-#define CFG_NVRAM_SIZE		242			/* NVRAM size		*/
+#define CONFIG_SYS_NVRAM_BASE_ADDR	0xF0000500		/* NVRAM base address	*/
+#define CONFIG_SYS_NVRAM_SIZE		242			/* NVRAM size		*/
 
 /*-----------------------------------------------------------------------
  * I2C EEPROM (CAT24WC16) for environment
  */
 #define CONFIG_HARD_I2C			/* I2c with hardware support */
-#define CFG_I2C_SPEED		400000	/* I2C speed and slave address */
-#define CFG_I2C_SLAVE		0x7F
+#define CONFIG_SYS_I2C_SPEED		400000	/* I2C speed and slave address */
+#define CONFIG_SYS_I2C_SLAVE		0x7F
 
-#define CFG_I2C_EEPROM_ADDR	0x50	/* EEPROM CAT28WC08		*/
-#define CFG_I2C_EEPROM_ADDR_LEN 1	/* Bytes of address		*/
+#define CONFIG_SYS_I2C_EEPROM_ADDR	0x50	/* EEPROM CAT28WC08		*/
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1	/* Bytes of address		*/
 /* mask of address bits that overflow into the "EEPROM chip address"	*/
-#define CFG_I2C_EEPROM_ADDR_OVERFLOW	0x07
-#define CFG_EEPROM_PAGE_WRITE_BITS 4	/* The Catalyst CAT24WC08 has	*/
+#define CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW	0x07
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 4	/* The Catalyst CAT24WC08 has	*/
 					/* 16 byte page write mode using*/
 					/* last 4 bits of the address	*/
-#define CFG_EEPROM_PAGE_WRITE_DELAY_MS	10   /* and takes up to 10 msec */
-#define CFG_EEPROM_PAGE_WRITE_ENABLE
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	10   /* and takes up to 10 msec */
 
 /*
  * Init Memory Controller:
@@ -267,21 +267,21 @@
  */
 
 /* Memory Bank 0 (Flash Bank 0, NOR-FLASH) initialization			*/
-#define CFG_EBC_PB0AP		0x92015480
-/*#define CFG_EBC_PB0AP		  0x08055880  /XXX* TWT=16,CSN=1,OEN=1,WBN=1,WBF=1,TH=4,SOR=1 */
-#define CFG_EBC_PB0CR		0xFFC5A000  /* BAS=0xFFC,BS=4MB,BU=R/W,BW=16bit */
+#define CONFIG_SYS_EBC_PB0AP		0x92015480
+/*#define CONFIG_SYS_EBC_PB0AP		  0x08055880  /XXX* TWT=16,CSN=1,OEN=1,WBN=1,WBF=1,TH=4,SOR=1 */
+#define CONFIG_SYS_EBC_PB0CR		0xFFC5A000  /* BAS=0xFFC,BS=4MB,BU=R/W,BW=16bit */
 
 /* Memory Bank 1 (Flash Bank 1, NAND-FLASH) initialization			*/
-#define CFG_EBC_PB1AP		0x92015480
-#define CFG_EBC_PB1CR		0xF4018000  /* BAS=0xF40,BS=1MB,BU=R/W,BW=8bit	*/
+#define CONFIG_SYS_EBC_PB1AP		0x92015480
+#define CONFIG_SYS_EBC_PB1CR		0xF4018000  /* BAS=0xF40,BS=1MB,BU=R/W,BW=8bit	*/
 
 /* Memory Bank 2 (8 Bit Peripheral: CAN, UART, RTC) initialization		*/
-#define CFG_EBC_PB2AP		0x010053C0  /* BWT=2,WBN=1,WBF=1,TH=1,RE=1,SOR=1,BEM=1 */
-#define CFG_EBC_PB2CR		0xF0018000  /* BAS=0xF00,BS=1MB,BU=R/W,BW=8bit	*/
+#define CONFIG_SYS_EBC_PB2AP		0x010053C0  /* BWT=2,WBN=1,WBF=1,TH=1,RE=1,SOR=1,BEM=1 */
+#define CONFIG_SYS_EBC_PB2CR		0xF0018000  /* BAS=0xF00,BS=1MB,BU=R/W,BW=8bit	*/
 
 /* Memory Bank 3 (16 Bit Peripheral: FPGA internal, dig. IO) initialization	*/
-#define CFG_EBC_PB3AP		0x010053C0  /* BWT=2,WBN=1,WBF=1,TH=1,RE=1,SOR=1,BEM=1 */
-#define CFG_EBC_PB3CR		0xF011A000  /* BAS=0xF01,BS=1MB,BU=R/W,BW=16bit */
+#define CONFIG_SYS_EBC_PB3AP		0x010053C0  /* BWT=2,WBN=1,WBF=1,TH=1,RE=1,SOR=1,BEM=1 */
+#define CONFIG_SYS_EBC_PB3CR		0xF011A000  /* BAS=0xF01,BS=1MB,BU=R/W,BW=16bit */
 
 #define CAN_BA		0xF0000000	    /* CAN Base Address			*/
 #define DUART0_BA	0xF0000400	    /* DUART Base Address		*/
@@ -289,36 +289,36 @@
 #define DUART2_BA	0xF0000410	    /* DUART Base Address		*/
 #define DUART3_BA	0xF0000418	    /* DUART Base Address		*/
 #define RTC_BA		0xF0000500	    /* RTC Base Address			*/
-#define CFG_NAND_BASE	0xF4000000
+#define CONFIG_SYS_NAND_BASE	0xF4000000
 
 /*-----------------------------------------------------------------------
  * FPGA stuff
  */
-#define CFG_FPGA_SPARTAN2	1	    /* using Xilinx Spartan 2 now    */
-#define CFG_FPGA_MAX_SIZE	128*1024    /* 128kByte is enough for XC2S50E*/
+#define CONFIG_SYS_FPGA_SPARTAN2	1	    /* using Xilinx Spartan 2 now    */
+#define CONFIG_SYS_FPGA_MAX_SIZE	128*1024    /* 128kByte is enough for XC2S50E*/
 
 /* FPGA program pin configuration */
-#define CFG_FPGA_PRG		0x04000000  /* FPGA program pin (ppc output) */
-#define CFG_FPGA_CLK		0x02000000  /* FPGA clk pin (ppc output)     */
-#define CFG_FPGA_DATA		0x01000000  /* FPGA data pin (ppc output)    */
-#define CFG_FPGA_INIT		0x00010000  /* FPGA init pin (ppc input)     */
-#define CFG_FPGA_DONE		0x00008000  /* FPGA done pin (ppc input)     */
+#define CONFIG_SYS_FPGA_PRG		0x04000000  /* FPGA program pin (ppc output) */
+#define CONFIG_SYS_FPGA_CLK		0x02000000  /* FPGA clk pin (ppc output)     */
+#define CONFIG_SYS_FPGA_DATA		0x01000000  /* FPGA data pin (ppc output)    */
+#define CONFIG_SYS_FPGA_INIT		0x00010000  /* FPGA init pin (ppc input)     */
+#define CONFIG_SYS_FPGA_DONE		0x00008000  /* FPGA done pin (ppc input)     */
 
 /*-----------------------------------------------------------------------
  * Definitions for initial stack pointer and data area (in data cache)
  */
 /* use on chip memory ( OCM ) for temperary stack until sdram is tested */
-#define CFG_TEMP_STACK_OCM	  1
+#define CONFIG_SYS_TEMP_STACK_OCM	  1
 
 /* On Chip Memory location */
-#define CFG_OCM_DATA_ADDR	0xF8000000
-#define CFG_OCM_DATA_SIZE	0x1000
-#define CFG_INIT_RAM_ADDR	CFG_OCM_DATA_ADDR /* inside of SDRAM		*/
-#define CFG_INIT_RAM_END	CFG_OCM_DATA_SIZE /* End of used area in RAM	*/
+#define CONFIG_SYS_OCM_DATA_ADDR	0xF8000000
+#define CONFIG_SYS_OCM_DATA_SIZE	0x1000
+#define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_OCM_DATA_ADDR /* inside of SDRAM		*/
+#define CONFIG_SYS_INIT_RAM_END	CONFIG_SYS_OCM_DATA_SIZE /* End of used area in RAM	*/
 
-#define CFG_GBL_DATA_SIZE      128  /* size in bytes reserved for initial data */
-#define CFG_GBL_DATA_OFFSET    (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_GBL_DATA_SIZE      128  /* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET    (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
 /*-----------------------------------------------------------------------
  * Definitions for GPIO setup (PPC405EP specific)
@@ -332,15 +332,15 @@
  * GPIO0[28-29] - UART1 data signal input/output
  * GPIO0[30-31] - EMAC0 and EMAC1 reject packet inputs
  */
-#define CFG_GPIO0_OSRH		0x40000550
-#define CFG_GPIO0_OSRL		0x00000110
-#define CFG_GPIO0_ISR1H		0x00000000
-#define CFG_GPIO0_ISR1L		0x15555445
-#define CFG_GPIO0_TSRH		0x00000000
-#define CFG_GPIO0_TSRL		0x00000000
-#define CFG_GPIO0_TCR		0xF7FE0014
-
-#define CFG_DUART_RST		(0x80000000 >> 14)
+#define CONFIG_SYS_GPIO0_OSRH		0x40000550
+#define CONFIG_SYS_GPIO0_OSRL		0x00000110
+#define CONFIG_SYS_GPIO0_ISR1H		0x00000000
+#define CONFIG_SYS_GPIO0_ISR1L		0x15555445
+#define CONFIG_SYS_GPIO0_TSRH		0x00000000
+#define CONFIG_SYS_GPIO0_TSRL		0x00000000
+#define CONFIG_SYS_GPIO0_TCR		0xF7FE0014
+
+#define CONFIG_SYS_DUART_RST		(0x80000000 >> 14)
 
 /*
  * Internal Definitions
diff --git a/include/configs/XPEDITE1K.h b/include/configs/XPEDITE1K.h
index 38ea576a6..8d44ec6d7 100644
--- a/include/configs/XPEDITE1K.h
+++ b/include/configs/XPEDITE1K.h
@@ -38,29 +38,29 @@
 #define CONFIG_440		1
 #define CONFIG_440GX		1		/* 440 GX */
 #define CONFIG_BOARD_EARLY_INIT_F 1		/* Call board_pre_init	*/
-#undef	CFG_DRAM_TEST				/* Disable-takes long time! */
+#undef	CONFIG_SYS_DRAM_TEST				/* Disable-takes long time! */
 #define CONFIG_SYS_CLK_FREQ	33333333	/* external freq to pll */
 
 
 /* POST support */
-#define CONFIG_POST		(CFG_POST_RTC	   | \
-				 CFG_POST_I2C)
+#define CONFIG_POST		(CONFIG_SYS_POST_RTC	   | \
+				 CONFIG_SYS_POST_I2C)
 
 /*-----------------------------------------------------------------------
  * Base addresses -- Note these are effective addresses where the
  * actual resources get mapped (not physical addresses)
  *----------------------------------------------------------------------*/
-#define CFG_SDRAM_BASE	    0x00000000		/* _must_ be 0		*/
-#define CFG_FLASH_BASE	    0xfff80000		/* start of FLASH	*/
+#define CONFIG_SYS_SDRAM_BASE	    0x00000000		/* _must_ be 0		*/
+#define CONFIG_SYS_FLASH_BASE	    0xfff80000		/* start of FLASH	*/
 
-#define CFG_MONITOR_BASE    CFG_FLASH_BASE	/* start of monitor	*/
-#define CFG_PCI_MEMBASE	    0x80000000		/* mapped pci memory	*/
-#define CFG_PERIPHERAL_BASE 0xe0000000		/* internal peripherals */
-#define CFG_ISRAM_BASE	    0xc0000000		/* internal SRAM	*/
-#define CFG_PCI_BASE	    0xd0000000		/* internal PCI regs	*/
+#define CONFIG_SYS_MONITOR_BASE    CONFIG_SYS_FLASH_BASE	/* start of monitor	*/
+#define CONFIG_SYS_PCI_MEMBASE	    0x80000000		/* mapped pci memory	*/
+#define CONFIG_SYS_PERIPHERAL_BASE 0xe0000000		/* internal peripherals */
+#define CONFIG_SYS_ISRAM_BASE	    0xc0000000		/* internal SRAM	*/
+#define CONFIG_SYS_PCI_BASE	    0xd0000000		/* internal PCI regs	*/
 
-#define CFG_NVRAM_BASE_ADDR (CFG_PERIPHERAL_BASE + 0x08000000)
-#define CFG_GPIO_BASE	    (CFG_PERIPHERAL_BASE + 0x00000700)
+#define CONFIG_SYS_NVRAM_BASE_ADDR (CONFIG_SYS_PERIPHERAL_BASE + 0x08000000)
+#define CONFIG_SYS_GPIO_BASE	    (CONFIG_SYS_PERIPHERAL_BASE + 0x00000700)
 
 #define USR_LED0	    0x00000080
 #define USR_LED1	    0x00000100
@@ -71,33 +71,33 @@
 extern unsigned long in32(unsigned int);
 extern void out32(unsigned int, unsigned long);
 
-#define LED0_ON() out32(CFG_GPIO_BASE, (in32(CFG_GPIO_BASE) & ~USR_LED0))
-#define LED1_ON() out32(CFG_GPIO_BASE, (in32(CFG_GPIO_BASE) & ~USR_LED1))
-#define LED2_ON() out32(CFG_GPIO_BASE, (in32(CFG_GPIO_BASE) & ~USR_LED2))
-#define LED3_ON() out32(CFG_GPIO_BASE, (in32(CFG_GPIO_BASE) & ~USR_LED3))
+#define LED0_ON() out32(CONFIG_SYS_GPIO_BASE, (in32(CONFIG_SYS_GPIO_BASE) & ~USR_LED0))
+#define LED1_ON() out32(CONFIG_SYS_GPIO_BASE, (in32(CONFIG_SYS_GPIO_BASE) & ~USR_LED1))
+#define LED2_ON() out32(CONFIG_SYS_GPIO_BASE, (in32(CONFIG_SYS_GPIO_BASE) & ~USR_LED2))
+#define LED3_ON() out32(CONFIG_SYS_GPIO_BASE, (in32(CONFIG_SYS_GPIO_BASE) & ~USR_LED3))
 
-#define LED0_OFF() out32(CFG_GPIO_BASE, (in32(CFG_GPIO_BASE) | USR_LED0))
-#define LED1_OFF() out32(CFG_GPIO_BASE, (in32(CFG_GPIO_BASE) | USR_LED1))
-#define LED2_OFF() out32(CFG_GPIO_BASE, (in32(CFG_GPIO_BASE) | USR_LED2))
-#define LED3_OFF() out32(CFG_GPIO_BASE, (in32(CFG_GPIO_BASE) | USR_LED3))
+#define LED0_OFF() out32(CONFIG_SYS_GPIO_BASE, (in32(CONFIG_SYS_GPIO_BASE) | USR_LED0))
+#define LED1_OFF() out32(CONFIG_SYS_GPIO_BASE, (in32(CONFIG_SYS_GPIO_BASE) | USR_LED1))
+#define LED2_OFF() out32(CONFIG_SYS_GPIO_BASE, (in32(CONFIG_SYS_GPIO_BASE) | USR_LED2))
+#define LED3_OFF() out32(CONFIG_SYS_GPIO_BASE, (in32(CONFIG_SYS_GPIO_BASE) | USR_LED3))
 #endif
 
 /*-----------------------------------------------------------------------
  * Initial RAM & stack pointer (placed in internal SRAM)
  *----------------------------------------------------------------------*/
-#define CFG_TEMP_STACK_OCM  1
-#define CFG_OCM_DATA_ADDR   CFG_ISRAM_BASE
-#define CFG_INIT_RAM_ADDR   CFG_ISRAM_BASE  /* Initial RAM address	*/
-#define CFG_INIT_RAM_END    0x2000	    /* End of used area in RAM	*/
-#define CFG_GBL_DATA_SIZE   128		    /* num bytes initial data	*/
+#define CONFIG_SYS_TEMP_STACK_OCM  1
+#define CONFIG_SYS_OCM_DATA_ADDR   CONFIG_SYS_ISRAM_BASE
+#define CONFIG_SYS_INIT_RAM_ADDR   CONFIG_SYS_ISRAM_BASE  /* Initial RAM address	*/
+#define CONFIG_SYS_INIT_RAM_END    0x2000	    /* End of used area in RAM	*/
+#define CONFIG_SYS_GBL_DATA_SIZE   128		    /* num bytes initial data	*/
 
 
-#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_POST_WORD_ADDR  (CFG_GBL_DATA_OFFSET - 0x4)
-#define CFG_INIT_SP_OFFSET  CFG_POST_WORD_ADDR
+#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_POST_WORD_ADDR  (CONFIG_SYS_GBL_DATA_OFFSET - 0x4)
+#define CONFIG_SYS_INIT_SP_OFFSET  CONFIG_SYS_POST_WORD_ADDR
 
-#define CFG_MONITOR_LEN	    (256 * 1024)    /* Reserve 256 kB for Mon	*/
-#define CFG_MALLOC_LEN	    (128 * 1024)    /* Reserve 128 kB for malloc*/
+#define CONFIG_SYS_MONITOR_LEN	    (256 * 1024)    /* Reserve 256 kB for Mon	*/
+#define CONFIG_SYS_MALLOC_LEN	    (128 * 1024)    /* Reserve 128 kB for malloc*/
 
 /*-----------------------------------------------------------------------
  * Serial Port
@@ -105,7 +105,7 @@ extern void out32(unsigned int, unsigned long);
 #undef	CONFIG_SERIAL_SOFTWARE_FIFO
 #define CONFIG_BAUDRATE		9600
 
-#define CFG_BAUDRATE_TABLE  \
+#define CONFIG_SYS_BAUDRATE_TABLE  \
     {300, 600, 1200, 2400, 4800, 9600, 19200, 38400}
 
 /*-----------------------------------------------------------------------
@@ -115,23 +115,23 @@ extern void out32(unsigned int, unsigned long);
  * The DS1743 code assumes this condition (i.e. -- it assumes the base
  * address for the RTC registers is:
  *
- *	CFG_NVRAM_BASE_ADDR + CFG_NVRAM_SIZE
+ *	CONFIG_SYS_NVRAM_BASE_ADDR + CONFIG_SYS_NVRAM_SIZE
  *
  *----------------------------------------------------------------------*/
 /* TBS:	 Xpedite 1000 has STMicro M41T00 via IIC */
 #define CONFIG_RTC_M41T11 1
-#define CFG_I2C_RTC_ADDR 0x68
-#define CFG_M41T11_BASE_YEAR 2000
+#define CONFIG_SYS_I2C_RTC_ADDR 0x68
+#define CONFIG_SYS_M41T11_BASE_YEAR 2000
 
 /*-----------------------------------------------------------------------
  * FLASH related
  *----------------------------------------------------------------------*/
-#define CFG_MAX_FLASH_BANKS	1		    /* number of banks	    */
-#define CFG_MAX_FLASH_SECT	8		    /* sectors per device   */
+#define CONFIG_SYS_MAX_FLASH_BANKS	1		    /* number of banks	    */
+#define CONFIG_SYS_MAX_FLASH_SECT	8		    /* sectors per device   */
 
-#undef	CFG_FLASH_CHECKSUM
-#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
-#define CFG_FLASH_WRITE_TOUT	500	    /* Timeout for Flash Write (in ms)	*/
+#undef	CONFIG_SYS_FLASH_CHECKSUM
+#define CONFIG_SYS_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
+#define CONFIG_SYS_FLASH_WRITE_TOUT	500	    /* Timeout for Flash Write (in ms)	*/
 
 /*-----------------------------------------------------------------------
  * DDR SDRAM
@@ -144,21 +144,20 @@ extern void out32(unsigned int, unsigned long);
  *----------------------------------------------------------------------*/
 #define CONFIG_HARD_I2C		1	    /* I2C with hardware support	*/
 #undef	CONFIG_SOFT_I2C			    /* I2C bit-banged		*/
-#define CFG_I2C_SPEED		400000	/* I2C speed and slave address	*/
-#define CFG_I2C_SLAVE		0x7f
-#define CFG_I2C_NOPROBES	{0x55,0x56,0x57,0x58,0x59,0x5a,0x5b,0x5c,0x69}	/* Don't probe these addrs */
+#define CONFIG_SYS_I2C_SPEED		400000	/* I2C speed and slave address	*/
+#define CONFIG_SYS_I2C_SLAVE		0x7f
+#define CONFIG_SYS_I2C_NOPROBES	{0x55,0x56,0x57,0x58,0x59,0x5a,0x5b,0x5c,0x69}	/* Don't probe these addrs */
 
 /*-----------------------------------------------------------------------
  * Environment
  *----------------------------------------------------------------------*/
-#define CFG_ENV_IS_IN_EEPROM 1
-#define CFG_ENV_SIZE		0x100	    /* Size of Environment vars */
-#define CFG_ENV_OFFSET		0x100
-#define CFG_I2C_EEPROM_ADDR	0x50		/* this is actually the second page of the eeprom */
-#define CFG_I2C_EEPROM_ADDR_LEN 1
-#define CFG_EEPROM_PAGE_WRITE_ENABLE
-#define CFG_EEPROM_PAGE_WRITE_BITS 3
-#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10
+#define CONFIG_ENV_IS_IN_EEPROM 1
+#define CONFIG_ENV_SIZE		0x100	    /* Size of Environment vars */
+#define CONFIG_ENV_OFFSET		0x100
+#define CONFIG_SYS_I2C_EEPROM_ADDR	0x50		/* this is actually the second page of the eeprom */
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10
 
 #define CONFIG_BOOTARGS		"root=/dev/hda1 "
 #define CONFIG_BOOTCOMMAND	"bootm ffc00000"    /* autoboot command */
@@ -166,8 +165,9 @@ extern void out32(unsigned int, unsigned long);
 #define CONFIG_BAUDRATE		9600
 
 #define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
-#define CFG_LOADS_BAUD_CHANGE	1	/* allow baudrate change	*/
+#define CONFIG_SYS_LOADS_BAUD_CHANGE	1	/* allow baudrate change	*/
 
+#define CONFIG_PPC4xx_EMAC
 #define CONFIG_MII			1	/* MII PHY management		*/
 #define CONFIG_PHY_ADDR		0	/* PHY address phy0 not populated */
 #define CONFIG_PHY1_ADDR	1	/* PHY address phy1 not populated */
@@ -176,7 +176,7 @@ extern void out32(unsigned int, unsigned long);
 #define CONFIG_NET_MULTI	1
 #define CONFIG_PHY_GIGE		1	/* Include GbE speed/duplex detection */
 #define CONFIG_PHY_RESET        1       /* reset phy upon startup         */
-#define CFG_RX_ETH_BUFFER   32	/* Number of ethernet rx buffers & descriptors */
+#define CONFIG_SYS_RX_ETH_BUFFER   32	/* Number of ethernet rx buffers & descriptors */
 
 #define CONFIG_HAS_ETH1		1	/* add support for "eth1addr"	*/
 #define CONFIG_HAS_ETH2		1	/* add support for "eth2addr"	*/
@@ -215,24 +215,24 @@ extern void out32(unsigned int, unsigned long);
 /*
  * Miscellaneous configurable options
  */
-#define CFG_LONGHELP			/* undef to save memory		*/
-#define CFG_PROMPT	"=> "		/* Monitor Command Prompt	*/
+#define CONFIG_SYS_LONGHELP			/* undef to save memory		*/
+#define CONFIG_SYS_PROMPT	"=> "		/* Monitor Command Prompt	*/
 #if defined(CONFIG_CMD_KGDB)
-#define CFG_CBSIZE	1024		/* Console I/O Buffer Size	*/
+#define CONFIG_SYS_CBSIZE	1024		/* Console I/O Buffer Size	*/
 #else
-#define CFG_CBSIZE	256		/* Console I/O Buffer Size	*/
+#define CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size	*/
 #endif
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define CFG_MAXARGS	16		/* max number of command args	*/
-#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS	16		/* max number of command args	*/
+#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
 
-#define CFG_MEMTEST_START	0x0400000	/* memtest works on	*/
-#define CFG_MEMTEST_END		0x0C00000	/* 4 ... 12 MB in DRAM	*/
+#define CONFIG_SYS_MEMTEST_START	0x0400000	/* memtest works on	*/
+#define CONFIG_SYS_MEMTEST_END		0x0C00000	/* 4 ... 12 MB in DRAM	*/
 
-#define CFG_LOAD_ADDR		0x100000	/* default load address */
-#define CFG_EXTBDINFO		1	/* To use extended board_into (bd_t) */
+#define CONFIG_SYS_LOAD_ADDR		0x100000	/* default load address */
+#define CONFIG_SYS_EXTBDINFO		1	/* To use extended board_into (bd_t) */
 
-#define CFG_HZ		1000		/* decrementer freq: 1 ms ticks */
+#define CONFIG_SYS_HZ		1000		/* decrementer freq: 1 ms ticks */
 
 
 /*-----------------------------------------------------------------------
@@ -243,20 +243,20 @@ extern void out32(unsigned int, unsigned long);
 #define CONFIG_PCI				    /* include pci support		*/
 #define CONFIG_PCI_PNP				/* do pci plug-and-play		*/
 #define CONFIG_PCI_SCAN_SHOW		/* show pci devices on startup	*/
-#define CFG_PCI_TARGBASE    0x80000000	/* PCIaddr mapped to CFG_PCI_MEMBASE */
+#define CONFIG_SYS_PCI_TARGBASE    0x80000000	/* PCIaddr mapped to CONFIG_SYS_PCI_MEMBASE */
 
 /* Board-specific PCI */
-#define CFG_PCI_TARGET_INIT		    /* let board init pci target    */
+#define CONFIG_SYS_PCI_TARGET_INIT		    /* let board init pci target    */
 
-#define CFG_PCI_SUBSYS_VENDORID 0x1014	/* IBM */
-#define CFG_PCI_SUBSYS_DEVICEID 0xcafe	/* Whatever */
-#define CFG_PCI_FORCE_PCI_CONV          /* Force PCI Conventional Mode */
+#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x1014	/* IBM */
+#define CONFIG_SYS_PCI_SUBSYS_DEVICEID 0xcafe	/* Whatever */
+#define CONFIG_SYS_PCI_FORCE_PCI_CONV          /* Force PCI Conventional Mode */
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
+#define CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
 
 /*
  * Internal Definitions
diff --git a/include/configs/Yukon8220.h b/include/configs/Yukon8220.h
index 1b4195a08..c439068f5 100644
--- a/include/configs/Yukon8220.h
+++ b/include/configs/Yukon8220.h
@@ -35,8 +35,8 @@
 
 /* Input clock running at 30Mhz, read Hid1 for the CPU multiplier to
    determine the CPU speed. */
-#define CFG_MPC8220_CLKIN	30000000/* ... running at 30MHz */
-#define CFG_MPC8220_SYSPLL_VCO_MULTIPLIER 16 /* VCO multiplier can't be read from any register */
+#define CONFIG_SYS_MPC8220_CLKIN	30000000/* ... running at 30MHz */
+#define CONFIG_SYS_MPC8220_SYSPLL_VCO_MULTIPLIER 16 /* VCO multiplier can't be read from any register */
 
 #define BOOTFLAG_COLD		0x01	/* Normal Power-On: Boot from FLASH */
 #define BOOTFLAG_WARM		0x02	/* Software reboot	*/
@@ -53,16 +53,16 @@
 
 #ifdef CONFIG_EXTUART_CONSOLE
 #   define CONFIG_CONS_INDEX	1
-#   define CFG_NS16550_SERIAL
-#   define CFG_NS16550
-#   define CFG_NS16550_REG_SIZE 1
-#   define CFG_NS16550_COM1	(CFG_CPLD_BASE + 0x1008)
-#   define CFG_NS16550_CLK	18432000
+#   define CONFIG_SYS_NS16550_SERIAL
+#   define CONFIG_SYS_NS16550
+#   define CONFIG_SYS_NS16550_REG_SIZE 1
+#   define CONFIG_SYS_NS16550_COM1	(CONFIG_SYS_CPLD_BASE + 0x1008)
+#   define CONFIG_SYS_NS16550_CLK	18432000
 #endif
 
 #define CONFIG_BAUDRATE		115200	    /* ... at 115200 bps */
 
-#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
 
 #define CONFIG_TIMESTAMP			/* Print image info with timestamp */
 
@@ -120,166 +120,166 @@
  * I2C configuration
  */
 #define CONFIG_HARD_I2C		1
-#define CFG_I2C_MODULE		1
+#define CONFIG_SYS_I2C_MODULE		1
 
-#define CFG_I2C_SPEED		100000 /* 100 kHz */
-#define CFG_I2C_SLAVE		0x7F
+#define CONFIG_SYS_I2C_SPEED		100000 /* 100 kHz */
+#define CONFIG_SYS_I2C_SLAVE		0x7F
 
 /*
  * EEPROM configuration
  */
-#define CFG_I2C_EEPROM_ADDR		0x52	/* 1011000xb */
-#define CFG_I2C_EEPROM_ADDR_LEN		1
-#define CFG_EEPROM_PAGE_WRITE_BITS	3
-#define CFG_EEPROM_PAGE_WRITE_DELAY_MS	70
+#define CONFIG_SYS_I2C_EEPROM_ADDR		0x52	/* 1011000xb */
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN		1
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS	3
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	70
 /*
-#define CFG_ENV_IS_IN_EEPROM	1
-#define CFG_ENV_OFFSET		0
-#define CFG_ENV_SIZE		256
+#define CONFIG_ENV_IS_IN_EEPROM	1
+#define CONFIG_ENV_OFFSET		0
+#define CONFIG_ENV_SIZE		256
 */
 
-/* If CFG_AMD_BOOT is defined, the the system will boot from AMD.
+/* If CONFIG_SYS_AMD_BOOT is defined, the the system will boot from AMD.
    else undefined it will boot from Intel Strata flash */
-#define CFG_AMD_BOOT		1
+#define CONFIG_SYS_AMD_BOOT		1
 
 /*
  * Flexbus Chipselect configuration
  */
-#if defined (CFG_AMD_BOOT)
-#define CFG_CS0_BASE		0xfff0
-#define CFG_CS0_MASK		0x00080000  /* 512 KB */
-#define CFG_CS0_CTRL		0x003f0d40
-
-#define CFG_CS1_BASE		0xfe00
-#define CFG_CS1_MASK		0x01000000  /* 16 MB */
-#define CFG_CS1_CTRL		0x003f1540
+#if defined (CONFIG_SYS_AMD_BOOT)
+#define CONFIG_SYS_CS0_BASE		0xfff0
+#define CONFIG_SYS_CS0_MASK		0x00080000  /* 512 KB */
+#define CONFIG_SYS_CS0_CTRL		0x003f0d40
+
+#define CONFIG_SYS_CS1_BASE		0xfe00
+#define CONFIG_SYS_CS1_MASK		0x01000000  /* 16 MB */
+#define CONFIG_SYS_CS1_CTRL		0x003f1540
 #else
-#define CFG_CS0_BASE		0xff00
-#define CFG_CS0_MASK		0x01000000  /* 16 MB */
-#define CFG_CS0_CTRL		0x003f1540
+#define CONFIG_SYS_CS0_BASE		0xff00
+#define CONFIG_SYS_CS0_MASK		0x01000000  /* 16 MB */
+#define CONFIG_SYS_CS0_CTRL		0x003f1540
 
-#define CFG_CS1_BASE		0xfe08
-#define CFG_CS1_MASK		0x00080000  /* 512 KB */
-#define CFG_CS1_CTRL		0x003f0d40
+#define CONFIG_SYS_CS1_BASE		0xfe08
+#define CONFIG_SYS_CS1_MASK		0x00080000  /* 512 KB */
+#define CONFIG_SYS_CS1_CTRL		0x003f0d40
 #endif
 
-#define CFG_CS2_BASE		0xf100
-#define CFG_CS2_MASK		0x00040000
-#define CFG_CS2_CTRL		0x003f1140
+#define CONFIG_SYS_CS2_BASE		0xf100
+#define CONFIG_SYS_CS2_MASK		0x00040000
+#define CONFIG_SYS_CS2_CTRL		0x003f1140
 
-#define CFG_CS3_BASE		0xf200
-#define CFG_CS3_MASK		0x00040000
-#define CFG_CS3_CTRL		0x003f1100
+#define CONFIG_SYS_CS3_BASE		0xf200
+#define CONFIG_SYS_CS3_MASK		0x00040000
+#define CONFIG_SYS_CS3_CTRL		0x003f1100
 
 
-#define CFG_FLASH0_BASE		(CFG_CS0_BASE << 16)
-#define CFG_FLASH1_BASE		(CFG_CS1_BASE << 16)
+#define CONFIG_SYS_FLASH0_BASE		(CONFIG_SYS_CS0_BASE << 16)
+#define CONFIG_SYS_FLASH1_BASE		(CONFIG_SYS_CS1_BASE << 16)
 
-#if defined (CFG_AMD_BOOT)
-#define CFG_AMD_BASE		CFG_FLASH0_BASE
-#define CFG_INTEL_BASE		CFG_FLASH1_BASE + 0xf00000
-#define CFG_FLASH_BASE		CFG_AMD_BASE
+#if defined (CONFIG_SYS_AMD_BOOT)
+#define CONFIG_SYS_AMD_BASE		CONFIG_SYS_FLASH0_BASE
+#define CONFIG_SYS_INTEL_BASE		CONFIG_SYS_FLASH1_BASE + 0xf00000
+#define CONFIG_SYS_FLASH_BASE		CONFIG_SYS_AMD_BASE
 #else
-#define CFG_INTEL_BASE		CFG_FLASH0_BASE + 0xf00000
-#define CFG_AMD_BASE		CFG_FLASH1_BASE
-#define CFG_FLASH_BASE		CFG_INTEL_BASE
+#define CONFIG_SYS_INTEL_BASE		CONFIG_SYS_FLASH0_BASE + 0xf00000
+#define CONFIG_SYS_AMD_BASE		CONFIG_SYS_FLASH1_BASE
+#define CONFIG_SYS_FLASH_BASE		CONFIG_SYS_INTEL_BASE
 #endif
 
-#define CFG_CPLD_BASE		(CFG_CS2_BASE << 16)
-#define CFG_FPGA_BASE		(CFG_CS3_BASE << 16)
+#define CONFIG_SYS_CPLD_BASE		(CONFIG_SYS_CS2_BASE << 16)
+#define CONFIG_SYS_FPGA_BASE		(CONFIG_SYS_CS3_BASE << 16)
 
 
-#define CFG_MAX_FLASH_BANKS	4	/* max num of memory banks	*/
-#define CFG_MAX_FLASH_SECT	128	/* max num of sects on one chip */
+#define CONFIG_SYS_MAX_FLASH_BANKS	4	/* max num of memory banks	*/
+#define CONFIG_SYS_MAX_FLASH_SECT	128	/* max num of sects on one chip */
 
-#define CFG_FLASH_ERASE_TOUT	240000	/* Flash Erase Timeout (in ms)	*/
-#define CFG_FLASH_WRITE_TOUT	500	/* Flash Write Timeout (in ms)	*/
-#define CFG_FLASH_LOCK_TOUT	5	/* Timeout for Flash Set Lock Bit (in ms) */
-#define CFG_FLASH_UNLOCK_TOUT	10000	/* Timeout for Flash Clear Lock Bits (in ms) */
-#define CFG_FLASH_PROTECTION		/* "Real" (hardware) sectors protection */
+#define CONFIG_SYS_FLASH_ERASE_TOUT	240000	/* Flash Erase Timeout (in ms)	*/
+#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Flash Write Timeout (in ms)	*/
+#define CONFIG_SYS_FLASH_LOCK_TOUT	5	/* Timeout for Flash Set Lock Bit (in ms) */
+#define CONFIG_SYS_FLASH_UNLOCK_TOUT	10000	/* Timeout for Flash Clear Lock Bits (in ms) */
+#define CONFIG_SYS_FLASH_PROTECTION		/* "Real" (hardware) sectors protection */
 
 #define PHYS_AMD_SECT_SIZE	0x00010000 /*  64 KB sectors (x2) */
 #define PHYS_INTEL_SECT_SIZE	0x00020000 /* 128 KB sectors (x2) */
 
-#define CFG_FLASH_CHECKSUM
+#define CONFIG_SYS_FLASH_CHECKSUM
 /*
  * Environment settings
  */
-#define CFG_ENV_IS_IN_FLASH	1
-#if defined (CFG_AMD_BOOT)
-#define CFG_ENV_ADDR		(CFG_FLASH0_BASE + CFG_CS0_MASK - PHYS_AMD_SECT_SIZE)
-#define CFG_ENV_SIZE		PHYS_AMD_SECT_SIZE
-#define CFG_ENV_SECT_SIZE	PHYS_AMD_SECT_SIZE
-#define CFG_ENV1_ADDR		(CFG_FLASH1_BASE + CFG_CS1_MASK - PHYS_INTEL_SECT_SIZE)
-#define CFG_ENV1_SIZE		PHYS_INTEL_SECT_SIZE
-#define CFG_ENV1_SECT_SIZE	PHYS_INTEL_SECT_SIZE
+#define CONFIG_ENV_IS_IN_FLASH	1
+#if defined (CONFIG_SYS_AMD_BOOT)
+#define CONFIG_ENV_ADDR		(CONFIG_SYS_FLASH0_BASE + CONFIG_SYS_CS0_MASK - PHYS_AMD_SECT_SIZE)
+#define CONFIG_ENV_SIZE		PHYS_AMD_SECT_SIZE
+#define CONFIG_ENV_SECT_SIZE	PHYS_AMD_SECT_SIZE
+#define CONFIG_ENV1_ADDR		(CONFIG_SYS_FLASH1_BASE + CONFIG_SYS_CS1_MASK - PHYS_INTEL_SECT_SIZE)
+#define CONFIG_ENV1_SIZE		PHYS_INTEL_SECT_SIZE
+#define CONFIG_ENV1_SECT_SIZE	PHYS_INTEL_SECT_SIZE
 #else
-#define CFG_ENV_ADDR		(CFG_FLASH0_BASE + CFG_CS0_MASK - PHYS_INTEL_SECT_SIZE)
-#define CFG_ENV_SIZE		PHYS_INTEL_SECT_SIZE
-#define CFG_ENV_SECT_SIZE	PHYS_INTEL_SECT_SIZE
-#define CFG_ENV1_ADDR		(CFG_FLASH1_BASE + CFG_CS1_MASK - PHYS_AMD_SECT_SIZE)
-#define CFG_ENV1_SIZE		PHYS_AMD_SECT_SIZE
-#define CFG_ENV1_SECT_SIZE	PHYS_AMD_SECT_SIZE
+#define CONFIG_ENV_ADDR		(CONFIG_SYS_FLASH0_BASE + CONFIG_SYS_CS0_MASK - PHYS_INTEL_SECT_SIZE)
+#define CONFIG_ENV_SIZE		PHYS_INTEL_SECT_SIZE
+#define CONFIG_ENV_SECT_SIZE	PHYS_INTEL_SECT_SIZE
+#define CONFIG_ENV1_ADDR		(CONFIG_SYS_FLASH1_BASE + CONFIG_SYS_CS1_MASK - PHYS_AMD_SECT_SIZE)
+#define CONFIG_ENV1_SIZE		PHYS_AMD_SECT_SIZE
+#define CONFIG_ENV1_SECT_SIZE	PHYS_AMD_SECT_SIZE
 #endif
 
 #define CONFIG_ENV_OVERWRITE	1
 
-#if defined CFG_ENV_IS_IN_FLASH
-#undef CFG_ENV_IS_IN_NVRAM
-#undef CFG_ENV_IS_IN_EEPROM
-#elif defined CFG_ENV_IS_IN_NVRAM
-#undef CFG_ENV_IS_IN_FLASH
-#undef CFG_ENV_IS_IN_EEPROM
-#elif defined CFG_ENV_IS_IN_EEPROM
-#undef CFG_ENV_IS_IN_NVRAM
-#undef CFG_ENV_IS_IN_FLASH
+#if defined CONFIG_ENV_IS_IN_FLASH
+#undef CONFIG_ENV_IS_IN_NVRAM
+#undef CONFIG_ENV_IS_IN_EEPROM
+#elif defined CONFIG_ENV_IS_IN_NVRAM
+#undef CONFIG_ENV_IS_IN_FLASH
+#undef CONFIG_ENV_IS_IN_EEPROM
+#elif defined CONFIG_ENV_IS_IN_EEPROM
+#undef CONFIG_ENV_IS_IN_NVRAM
+#undef CONFIG_ENV_IS_IN_FLASH
 #endif
 
-#ifndef CFG_JFFS2_FIRST_SECTOR
-#define CFG_JFFS2_FIRST_SECTOR	0
+#ifndef CONFIG_SYS_JFFS2_FIRST_SECTOR
+#define CONFIG_SYS_JFFS2_FIRST_SECTOR	0
 #endif
-#ifndef CFG_JFFS2_FIRST_BANK
-#define CFG_JFFS2_FIRST_BANK	0
+#ifndef CONFIG_SYS_JFFS2_FIRST_BANK
+#define CONFIG_SYS_JFFS2_FIRST_BANK	0
 #endif
-#ifndef CFG_JFFS2_NUM_BANKS
-#define CFG_JFFS2_NUM_BANKS	1
+#ifndef CONFIG_SYS_JFFS2_NUM_BANKS
+#define CONFIG_SYS_JFFS2_NUM_BANKS	1
 #endif
-#define CFG_JFFS2_LAST_BANK (CFG_JFFS2_FIRST_BANK + CFG_JFFS2_NUM_BANKS - 1)
+#define CONFIG_SYS_JFFS2_LAST_BANK (CONFIG_SYS_JFFS2_FIRST_BANK + CONFIG_SYS_JFFS2_NUM_BANKS - 1)
 
 /*
  * Memory map
  */
-#define CFG_MBAR		0xF0000000
-#define CFG_SDRAM_BASE		0x00000000
-#define CFG_DEFAULT_MBAR	0x80000000
-#define CFG_SRAM_BASE		(CFG_MBAR + 0x20000)
-#define CFG_SRAM_SIZE		0x8000
+#define CONFIG_SYS_MBAR		0xF0000000
+#define CONFIG_SYS_SDRAM_BASE		0x00000000
+#define CONFIG_SYS_DEFAULT_MBAR	0x80000000
+#define CONFIG_SYS_SRAM_BASE		(CONFIG_SYS_MBAR + 0x20000)
+#define CONFIG_SYS_SRAM_SIZE		0x8000
 
 /* Use SRAM until RAM will be available */
-#define CFG_INIT_RAM_ADDR	(CFG_MBAR + 0x20000)
-#define CFG_INIT_RAM_END	0x8000	/* End of used area in DPRAM */
+#define CONFIG_SYS_INIT_RAM_ADDR	(CONFIG_SYS_MBAR + 0x20000)
+#define CONFIG_SYS_INIT_RAM_END	0x8000	/* End of used area in DPRAM */
 
-#define CFG_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
-#define CFG_MONITOR_BASE	TEXT_BASE
-#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
-#   define CFG_RAMBOOT		1
+#define CONFIG_SYS_MONITOR_BASE	TEXT_BASE
+#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
+#   define CONFIG_SYS_RAMBOOT		1
 #endif
 
-#define CFG_MONITOR_LEN		(256 << 10) /* Reserve 256 kB for Monitor   */
-#define CFG_MALLOC_LEN		(128 << 10) /* Reserve 128 kB for malloc()  */
-#define CFG_BOOTMAPSZ		(8 << 20)   /* Initial Memory map for Linux */
+#define CONFIG_SYS_MONITOR_LEN		(256 << 10) /* Reserve 256 kB for Monitor   */
+#define CONFIG_SYS_MALLOC_LEN		(128 << 10) /* Reserve 128 kB for malloc()  */
+#define CONFIG_SYS_BOOTMAPSZ		(8 << 20)   /* Initial Memory map for Linux */
 
 /* SDRAM configuration */
-#define CFG_SDRAM_TOTAL_BANKS		2
-#define CFG_SDRAM_SPD_I2C_ADDR		0x51		/* 7bit */
-#define CFG_SDRAM_SPD_SIZE		0x40
-#define CFG_SDRAM_CAS_LATENCY		4		/* (CL=2)x2 */
+#define CONFIG_SYS_SDRAM_TOTAL_BANKS		2
+#define CONFIG_SYS_SDRAM_SPD_I2C_ADDR		0x51		/* 7bit */
+#define CONFIG_SYS_SDRAM_SPD_SIZE		0x40
+#define CONFIG_SYS_SDRAM_CAS_LATENCY		4		/* (CL=2)x2 */
 
 /* SDRAM drive strength register */
-#define CFG_SDRAM_DRIVE_STRENGTH	((DRIVE_STRENGTH_LOW  << SDRAMDS_SBE_SHIFT) | \
+#define CONFIG_SYS_SDRAM_DRIVE_STRENGTH	((DRIVE_STRENGTH_LOW  << SDRAMDS_SBE_SHIFT) | \
 					 (DRIVE_STRENGTH_HIGH << SDRAMDS_SBC_SHIFT) | \
 					 (DRIVE_STRENGTH_LOW  << SDRAMDS_SBA_SHIFT) | \
 					 (DRIVE_STRENGTH_OFF  << SDRAMDS_SBS_SHIFT) | \
@@ -296,33 +296,33 @@
 /*
  * Miscellaneous configurable options
  */
-#define CFG_LONGHELP			    /* undef to save memory	*/
-#define CFG_PROMPT		"=> "	    /* Monitor Command Prompt	*/
+#define CONFIG_SYS_LONGHELP			    /* undef to save memory	*/
+#define CONFIG_SYS_PROMPT		"=> "	    /* Monitor Command Prompt	*/
 #if defined(CONFIG_CMD_KGDB)
-#define CFG_CBSIZE		1024	    /* Console I/O Buffer Size	*/
+#define CONFIG_SYS_CBSIZE		1024	    /* Console I/O Buffer Size	*/
 #else
-#define CFG_CBSIZE		256	    /* Console I/O Buffer Size	*/
+#define CONFIG_SYS_CBSIZE		256	    /* Console I/O Buffer Size	*/
 #endif
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16)	/* Print Buffer Size */
-#define CFG_MAXARGS		16	    /* max number of command args   */
-#define CFG_BARGSIZE		CFG_CBSIZE  /* Boot Argument Buffer Size    */
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)	/* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS		16	    /* max number of command args   */
+#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE  /* Boot Argument Buffer Size    */
 
-#define CFG_MEMTEST_START	0x00100000  /* memtest works on */
-#define CFG_MEMTEST_END		0x00f00000  /* 1 ... 15 MB in DRAM  */
+#define CONFIG_SYS_MEMTEST_START	0x00100000  /* memtest works on */
+#define CONFIG_SYS_MEMTEST_END		0x00f00000  /* 1 ... 15 MB in DRAM  */
 
-#define CFG_LOAD_ADDR		0x100000    /* default load address */
+#define CONFIG_SYS_LOAD_ADDR		0x100000    /* default load address */
 
-#define CFG_HZ			1000	    /* decrementer freq: 1 ms ticks */
+#define CONFIG_SYS_HZ			1000	    /* decrementer freq: 1 ms ticks */
 
-#define CFG_CACHELINE_SIZE	32	/* For MPC8220 CPUs */
+#define CONFIG_SYS_CACHELINE_SIZE	32	/* For MPC8220 CPUs */
 #if defined(CONFIG_CMD_KGDB)
-#  define CFG_CACHELINE_SHIFT	5   /* log base 2 of the above value */
+#  define CONFIG_SYS_CACHELINE_SHIFT	5   /* log base 2 of the above value */
 #endif
 
 /*
  * Various low-level settings
  */
-#define CFG_HID0_INIT		HID0_ICE | HID0_ICFI
-#define CFG_HID0_FINAL		HID0_ICE
+#define CONFIG_SYS_HID0_INIT		HID0_ICE | HID0_ICFI
+#define CONFIG_SYS_HID0_FINAL		HID0_ICE
 
 #endif /* __CONFIG_H */
diff --git a/include/configs/ZPC1900.h b/include/configs/ZPC1900.h
index 388c74768..9cda3f9bd 100644
--- a/include/configs/ZPC1900.h
+++ b/include/configs/ZPC1900.h
@@ -73,10 +73,10 @@
  * - Select bus for bd/buffers (see 28-13)
  * - Full duplex
  */
-# define CFG_CMXFCR_MASK	(CMXFCR_FC2 | CMXFCR_RF2CS_MSK | CMXFCR_TF2CS_MSK)
-# define CFG_CMXFCR_VALUE	(CMXFCR_RF2CS_CLK13 | CMXFCR_TF2CS_CLK14)
-# define CFG_CPMFCR_RAMTYPE	0
-# define CFG_FCC_PSMR		(FCC_PSMR_FDE | FCC_PSMR_LPB)
+# define CONFIG_SYS_CMXFCR_MASK	(CMXFCR_FC2 | CMXFCR_RF2CS_MSK | CMXFCR_TF2CS_MSK)
+# define CONFIG_SYS_CMXFCR_VALUE	(CMXFCR_RF2CS_CLK13 | CMXFCR_TF2CS_CLK14)
+# define CONFIG_SYS_CPMFCR_RAMTYPE	0
+# define CONFIG_SYS_FCC_PSMR		(FCC_PSMR_FDE | FCC_PSMR_LPB)
 
 #endif /* CONFIG_ETHER_INDEX */
 
@@ -146,133 +146,133 @@
 /*
  * Miscellaneous configurable options
  */
-#define CFG_HUSH_PARSER
-#define CFG_PROMPT_HUSH_PS2	"> "
-#define CFG_LONGHELP			/* undef to save memory	    */
-#define CFG_PROMPT		"=> "	/* Monitor Command Prompt   */
+#define CONFIG_SYS_HUSH_PARSER
+#define CONFIG_SYS_PROMPT_HUSH_PS2	"> "
+#define CONFIG_SYS_LONGHELP			/* undef to save memory	    */
+#define CONFIG_SYS_PROMPT		"=> "	/* Monitor Command Prompt   */
 #if defined(CONFIG_CMD_KGDB)
-#define CFG_CBSIZE		1024	/* Console I/O Buffer Size  */
+#define CONFIG_SYS_CBSIZE		1024	/* Console I/O Buffer Size  */
 #else
-#define CFG_CBSIZE		256	/* Console I/O Buffer Size  */
+#define CONFIG_SYS_CBSIZE		256	/* Console I/O Buffer Size  */
 #endif
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16)	/* Print Buffer Size  */
-#define CFG_MAXARGS		16		/* max number of command args */
-#define CFG_BARGSIZE		CFG_CBSIZE	/* Boot Argument Buffer Size  */
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)	/* Print Buffer Size  */
+#define CONFIG_SYS_MAXARGS		16		/* max number of command args */
+#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size  */
 
-#define CFG_MEMTEST_START	0x00100000	/* memtest works on */
-#define CFG_MEMTEST_END		0x03800000	/* 1 ... 56 MB in DRAM	*/
+#define CONFIG_SYS_MEMTEST_START	0x00100000	/* memtest works on */
+#define CONFIG_SYS_MEMTEST_END		0x03800000	/* 1 ... 56 MB in DRAM	*/
 
-#define CFG_LOAD_ADDR		0x400000	/* default load address */
+#define CONFIG_SYS_LOAD_ADDR		0x400000	/* default load address */
 
-#define CFG_HZ			1000	/* decrementer freq: 1 ms ticks */
+#define CONFIG_SYS_HZ			1000	/* decrementer freq: 1 ms ticks */
 
-#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
 
-#define CFG_SDRAM_BASE		0x00000000
-#define CFG_SDRAM_SIZE		64
+#define CONFIG_SYS_SDRAM_BASE		0x00000000
+#define CONFIG_SYS_SDRAM_SIZE		64
 
-#define CFG_IMMR		0xF0000000
-#define CFG_LSDRAM_BASE		0xFC000000
-#define CFG_FLASH_BASE		0xFE000000
-#define CFG_BCSR		0xFEA00000
-#define CFG_EEPROM		0xFEB00000
-#define CFG_FLSIMM_BASE		0xFF000000
+#define CONFIG_SYS_IMMR		0xF0000000
+#define CONFIG_SYS_LSDRAM_BASE		0xFC000000
+#define CONFIG_SYS_FLASH_BASE		0xFE000000
+#define CONFIG_SYS_BCSR		0xFEA00000
+#define CONFIG_SYS_EEPROM		0xFEB00000
+#define CONFIG_SYS_FLSIMM_BASE		0xFF000000
 
-#define CFG_FLASH_CFI
+#define CONFIG_SYS_FLASH_CFI
 #define CONFIG_FLASH_CFI_DRIVER
-#define CFG_MAX_FLASH_BANKS	2	/* max num of flash banks	*/
-#define CFG_MAX_FLASH_SECT	32	/* max num of sects on one chip */
+#define CONFIG_SYS_MAX_FLASH_BANKS	2	/* max num of flash banks	*/
+#define CONFIG_SYS_MAX_FLASH_SECT	32	/* max num of sects on one chip */
 
-#define CFG_FLASH_BANKS_LIST	{ CFG_FLASH_BASE, CFG_FLSIMM_BASE }
+#define CONFIG_SYS_FLASH_BANKS_LIST	{ CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLSIMM_BASE }
 
 #define BCSR_PCI_MODE		0x01
 
-#define CFG_INIT_RAM_ADDR	CFG_IMMR
-#define CFG_INIT_RAM_END	0x4000	/* End of used area in DPRAM	*/
-#define CFG_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_IMMR
+#define CONFIG_SYS_INIT_RAM_END	0x4000	/* End of used area in DPRAM	*/
+#define CONFIG_SYS_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
 /* Hard reset configuration word */
-#define CFG_HRCW_MASTER		(HRCW_EBM | HRCW_BPS01| HRCW_CIP          |\
+#define CONFIG_SYS_HRCW_MASTER		(HRCW_EBM | HRCW_BPS01| HRCW_CIP          |\
 				 HRCW_L2CPC10 | HRCW_DPPC00 | HRCW_ISB100 |\
 				 HRCW_BMS | HRCW_LBPC00 | HRCW_APPC10     |\
 				 HRCW_MODCK_H0111                          \
 				) /* 0x16848207 */
 /* No slaves */
-#define CFG_HRCW_SLAVE1		0
-#define CFG_HRCW_SLAVE2		0
-#define CFG_HRCW_SLAVE3		0
-#define CFG_HRCW_SLAVE4		0
-#define CFG_HRCW_SLAVE5		0
-#define CFG_HRCW_SLAVE6		0
-#define CFG_HRCW_SLAVE7		0
+#define CONFIG_SYS_HRCW_SLAVE1		0
+#define CONFIG_SYS_HRCW_SLAVE2		0
+#define CONFIG_SYS_HRCW_SLAVE3		0
+#define CONFIG_SYS_HRCW_SLAVE4		0
+#define CONFIG_SYS_HRCW_SLAVE5		0
+#define CONFIG_SYS_HRCW_SLAVE6		0
+#define CONFIG_SYS_HRCW_SLAVE7		0
 
 #define BOOTFLAG_COLD		0x01	/* Normal Power-On: Boot from FLASH */
 #define BOOTFLAG_WARM		0x02	/* Software reboot                  */
 
-#define CFG_MONITOR_BASE	TEXT_BASE
-#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
-#define CFG_RAMBOOT
+#define CONFIG_SYS_MONITOR_BASE	TEXT_BASE
+#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
+#define CONFIG_SYS_RAMBOOT
 #endif
 
-#define CFG_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor	*/
-#define CFG_MALLOC_LEN		(4096 << 10)	/* Reserve 4 MB for malloc()	*/
-#define CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
+#define CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor	*/
+#define CONFIG_SYS_MALLOC_LEN		(4096 << 10)	/* Reserve 4 MB for malloc()	*/
+#define CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
 
-#if !defined(CFG_ENV_IS_IN_FLASH) && !defined(CFG_ENV_IS_IN_NVRAM)
-#define CFG_ENV_IS_IN_NVRAM	1
+#if !defined(CONFIG_ENV_IS_IN_FLASH) && !defined(CONFIG_ENV_IS_IN_NVRAM)
+#define CONFIG_ENV_IS_IN_NVRAM	1
 #endif
 
-#ifdef CFG_ENV_IS_IN_FLASH
-#  define CFG_ENV_SECT_SIZE	0x10000
-#  define CFG_ENV_ADDR		(CFG_MONITOR_BASE + CFG_MONITOR_LEN)
+#ifdef CONFIG_ENV_IS_IN_FLASH
+#  define CONFIG_ENV_SECT_SIZE	0x10000
+#  define CONFIG_ENV_ADDR		(CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)
 #else
-#  define CFG_ENV_ADDR		(CFG_EEPROM + 0x400)
-#  define CFG_ENV_SIZE		0x1000
-#  define CFG_NVRAM_ACCESS_ROUTINE
+#  define CONFIG_ENV_ADDR		(CONFIG_SYS_EEPROM + 0x400)
+#  define CONFIG_ENV_SIZE		0x1000
+#  define CONFIG_SYS_NVRAM_ACCESS_ROUTINE
 #endif
 
-#define CFG_CACHELINE_SIZE	32	/* For MPC8260 CPU */
+#define CONFIG_SYS_CACHELINE_SIZE	32	/* For MPC8260 CPU */
 #if defined(CONFIG_CMD_KGDB)
-#  define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value */
+#  define CONFIG_SYS_CACHELINE_SHIFT	5	/* log base 2 of the above value */
 #endif
 
-#define CFG_HID0_INIT		(HID0_ICFI)
-#define CFG_HID0_FINAL		(HID0_ICE | HID0_IFEM | HID0_ABE)
-
-#define CFG_HID2		0
-
-#define CFG_SIUMCR		0x42200000
-#define CFG_SYPCR		0xFFFFFFC3
-#define CFG_BCR			0x90000000
-#define CFG_SCCR		SCCR_DFBRG01
-
-#define CFG_RMR			RMR_CSRE
-#define CFG_TMCNTSC		(TMCNTSC_SEC|TMCNTSC_ALR|TMCNTSC_TCF|TMCNTSC_TCE)
-#define CFG_PISCR		(PISCR_PS|PISCR_PTF|PISCR_PTE)
-#define CFG_RCCR		0
-
-#define CFG_PSDMR		/* 0x834DA43B */0x014DA43A
-#define CFG_PSRT		0x0F/* 0x0C */
-#define CFG_LSDMR		0x0085A562
-#define CFG_LSRT		0x0F
-#define CFG_MPTPR		0x4000
-
-#define CFG_PSDRAM_BR		(CFG_SDRAM_BASE | 0x00000041)
-#define CFG_PSDRAM_OR		0xFC0028C0
-#define CFG_LSDRAM_BR		(CFG_LSDRAM_BASE | 0x00001861)
-#define CFG_LSDRAM_OR		0xFF803480
-
-#define CFG_BR0_PRELIM		(CFG_FLASH_BASE | 0x00000801)
-#define CFG_OR0_PRELIM		0xFFE00856
-#define CFG_BR5_PRELIM		(CFG_EEPROM | 0x00000801)
-#define CFG_OR5_PRELIM		0xFFFF03F6
-#define CFG_BR6_PRELIM		(CFG_FLSIMM_BASE | 0x00001801)
-#define CFG_OR6_PRELIM		0xFF000856
-#define CFG_BR7_PRELIM		(CFG_BCSR | 0x00000801)
-#define CFG_OR7_PRELIM		0xFFFF83F6
-
-#define CFG_RESET_ADDRESS	0xC0000000
+#define CONFIG_SYS_HID0_INIT		(HID0_ICFI)
+#define CONFIG_SYS_HID0_FINAL		(HID0_ICE | HID0_IFEM | HID0_ABE)
+
+#define CONFIG_SYS_HID2		0
+
+#define CONFIG_SYS_SIUMCR		0x42200000
+#define CONFIG_SYS_SYPCR		0xFFFFFFC3
+#define CONFIG_SYS_BCR			0x90000000
+#define CONFIG_SYS_SCCR		SCCR_DFBRG01
+
+#define CONFIG_SYS_RMR			RMR_CSRE
+#define CONFIG_SYS_TMCNTSC		(TMCNTSC_SEC|TMCNTSC_ALR|TMCNTSC_TCF|TMCNTSC_TCE)
+#define CONFIG_SYS_PISCR		(PISCR_PS|PISCR_PTF|PISCR_PTE)
+#define CONFIG_SYS_RCCR		0
+
+#define CONFIG_SYS_PSDMR		/* 0x834DA43B */0x014DA43A
+#define CONFIG_SYS_PSRT		0x0F/* 0x0C */
+#define CONFIG_SYS_LSDMR		0x0085A562
+#define CONFIG_SYS_LSRT		0x0F
+#define CONFIG_SYS_MPTPR		0x4000
+
+#define CONFIG_SYS_PSDRAM_BR		(CONFIG_SYS_SDRAM_BASE | 0x00000041)
+#define CONFIG_SYS_PSDRAM_OR		0xFC0028C0
+#define CONFIG_SYS_LSDRAM_BR		(CONFIG_SYS_LSDRAM_BASE | 0x00001861)
+#define CONFIG_SYS_LSDRAM_OR		0xFF803480
+
+#define CONFIG_SYS_BR0_PRELIM		(CONFIG_SYS_FLASH_BASE | 0x00000801)
+#define CONFIG_SYS_OR0_PRELIM		0xFFE00856
+#define CONFIG_SYS_BR5_PRELIM		(CONFIG_SYS_EEPROM | 0x00000801)
+#define CONFIG_SYS_OR5_PRELIM		0xFFFF03F6
+#define CONFIG_SYS_BR6_PRELIM		(CONFIG_SYS_FLSIMM_BASE | 0x00001801)
+#define CONFIG_SYS_OR6_PRELIM		0xFF000856
+#define CONFIG_SYS_BR7_PRELIM		(CONFIG_SYS_BCSR | 0x00000801)
+#define CONFIG_SYS_OR7_PRELIM		0xFFFF83F6
+
+#define CONFIG_SYS_RESET_ADDRESS	0xC0000000
 
 #endif /* __CONFIG_H */
diff --git a/include/configs/ZUMA.h b/include/configs/ZUMA.h
index 5ba8d1a71..08c4ced1c 100644
--- a/include/configs/ZUMA.h
+++ b/include/configs/ZUMA.h
@@ -28,7 +28,7 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
-#define CFG_GT_6426x        GT_64260 /* with a 64260 system controller */
+#define CONFIG_SYS_GT_6426x        GT_64260 /* with a 64260 system controller */
 #define CONFIG_ETHER_PORT_MII	/* use two MII ports */
 #define CONFIG_INTEL_LXT97X	/* Intel LXT97X phy */
 
@@ -52,12 +52,12 @@
 /* which initialization functions to call for this board */
 #define CONFIG_MISC_INIT_R
 #define CONFIG_BOARD_EARLY_INIT_F
-#define CFG_BOARD_ASM_INIT
+#define CONFIG_SYS_BOARD_ASM_INIT
 
-#define CFG_BOARD_NAME		"Zuma APv2"
+#define CONFIG_SYS_BOARD_NAME		"Zuma APv2"
 
-#define CFG_HUSH_PARSER
-#define CFG_PROMPT_HUSH_PS2	"> "
+#define CONFIG_SYS_HUSH_PARSER
+#define CONFIG_SYS_PROMPT_HUSH_PS2	"> "
 
 /*
  * The following defines let you select what serial you want to use
@@ -65,7 +65,7 @@
  *
  * what to do:
  * to use the DUART, undef CONFIG_MPSC.	 If you have hacked a serial
- * cable onto the second DUART channel, change the CFG_DUART port from 1
+ * cable onto the second DUART channel, change the CONFIG_SYS_DUART port from 1
  * to 0 below.
  *
  * to use the MPSC, #define CONFIG_MPSC.  If you have wired up another
@@ -96,7 +96,7 @@
 	"$netmask:$hostname:eth0:none panic=5 && bootm"
 
 #define CONFIG_LOADS_ECHO	0	/* echo off for serial download */
-#define CFG_LOADS_BAUD_CHANGE		/* allow baudrate changes	*/
+#define CONFIG_SYS_LOADS_BAUD_CHANGE		/* allow baudrate changes	*/
 
 #undef	CONFIG_WATCHDOG			/* watchdog disabled		*/
 #undef	CONFIG_ALTIVEC			/* undef to disable		*/
@@ -146,29 +146,29 @@
 /*
  * Miscellaneous configurable options
  */
-#define CFG_LONGHELP			/* undef to save memory		*/
-#define CFG_PROMPT	"=> "		/* Monitor Command Prompt	*/
+#define CONFIG_SYS_LONGHELP			/* undef to save memory		*/
+#define CONFIG_SYS_PROMPT	"=> "		/* Monitor Command Prompt	*/
 #if defined(CONFIG_CMD_KGDB)
-#define CFG_CBSIZE	1024		/* Console I/O Buffer Size	*/
+#define CONFIG_SYS_CBSIZE	1024		/* Console I/O Buffer Size	*/
 #else
-#define CFG_CBSIZE	256		/* Console I/O Buffer Size	*/
+#define CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size	*/
 #endif
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define CFG_MAXARGS	16		/* max number of command args	*/
-#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS	16		/* max number of command args	*/
+#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
 
-#define CFG_MEMTEST_START	0x00400000	/* memtest works on	*/
-#define CFG_MEMTEST_END		0x00C00000	/* 4 ... 12 MB in DRAM	*/
+#define CONFIG_SYS_MEMTEST_START	0x00400000	/* memtest works on	*/
+#define CONFIG_SYS_MEMTEST_END		0x00C00000	/* 4 ... 12 MB in DRAM	*/
 
-#define CFG_LOAD_ADDR		0x00300000	/* default load address */
+#define CONFIG_SYS_LOAD_ADDR		0x00300000	/* default load address */
 
-#define CFG_HZ			1000		/* decr freq: 1ms ticks */
+#define CONFIG_SYS_HZ			1000		/* decr freq: 1ms ticks */
 
-#define CFG_BUS_HZ		133000000	/* 133 MHz		*/
+#define CONFIG_SYS_BUS_HZ		133000000	/* 133 MHz		*/
 
-#define CFG_BUS_CLK		CFG_BUS_HZ
+#define CONFIG_SYS_BUS_CLK		CONFIG_SYS_BUS_HZ
 
-#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
 
 /*
  * Low Level Configuration Settings
@@ -179,48 +179,48 @@
 /*-----------------------------------------------------------------------
  * Definitions for initial stack pointer and data area
  */
-#define CFG_INIT_RAM_ADDR	0x40000000
-#define CFG_INIT_RAM_END	0x1000
-#define CFG_GBL_DATA_SIZE	128  /* size in bytes reserved for init data */
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_RAM_LOCK
+#define CONFIG_SYS_INIT_RAM_ADDR	0x40000000
+#define CONFIG_SYS_INIT_RAM_END	0x1000
+#define CONFIG_SYS_GBL_DATA_SIZE	128  /* size in bytes reserved for init data */
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_RAM_LOCK
 
 
 /*-----------------------------------------------------------------------
  * Start addresses for the final memory configuration
  * (Set up by the startup code)
- * Please note that CFG_SDRAM_BASE _must_ start at 0
+ * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
  */
-#define CFG_SDRAM_BASE		0x00000000
-#define CFG_FLASH_BASE		0xfff00000
-#define CFG_RESET_ADDRESS	0xfff00100
-#define CFG_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor */
-#define CFG_MONITOR_BASE	CFG_FLASH_BASE
-#define CFG_MALLOC_LEN		(256 << 10)	/* Reserve 256 kB for malloc */
+#define CONFIG_SYS_SDRAM_BASE		0x00000000
+#define CONFIG_SYS_FLASH_BASE		0xfff00000
+#define CONFIG_SYS_RESET_ADDRESS	0xfff00100
+#define CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor */
+#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_FLASH_BASE
+#define CONFIG_SYS_MALLOC_LEN		(256 << 10)	/* Reserve 256 kB for malloc */
 
 /* areas to map different things with the GT in physical space */
-#define CFG_DRAM_BANKS		4
-#define CFG_DFL_GT_REGS		0x14000000	/* boot time GT_REGS */
+#define CONFIG_SYS_DRAM_BANKS		4
+#define CONFIG_SYS_DFL_GT_REGS		0x14000000	/* boot time GT_REGS */
 
 /* What to put in the bats. */
-#define CFG_MISC_REGION_BASE	0xf0000000
+#define CONFIG_SYS_MISC_REGION_BASE	0xf0000000
 
 /* Peripheral Device section */
-#define CFG_GT_REGS		0xf8000000	/* later mapped GT_REGS */
-#define CFG_DEV_BASE		0xf0000000
-#define CFG_DEV0_SIZE		_64M /* zuma flash @ 0xf000.0000*/
-#define CFG_DEV1_SIZE		 _8M /* zuma IDE   @ 0xf400.0000 */
-#define CFG_DEV2_SIZE		 _8M /* unused */
-#define CFG_DEV3_SIZE		 _8M /* unused */
-
-#define CFG_DEV0_PAR		0xc498243c
+#define CONFIG_SYS_GT_REGS		0xf8000000	/* later mapped GT_REGS */
+#define CONFIG_SYS_DEV_BASE		0xf0000000
+#define CONFIG_SYS_DEV0_SIZE		_64M /* zuma flash @ 0xf000.0000*/
+#define CONFIG_SYS_DEV1_SIZE		 _8M /* zuma IDE   @ 0xf400.0000 */
+#define CONFIG_SYS_DEV2_SIZE		 _8M /* unused */
+#define CONFIG_SYS_DEV3_SIZE		 _8M /* unused */
+
+#define CONFIG_SYS_DEV0_PAR		0xc498243c
 	/*     c    4     9     8     2	    4     3     c */
 	/* 33 22|2222|22 22|111 1|11 11|1 1  |	   |      */
 	/* 10 98|7654|32 10|987 6|54 32|1 098|7 654|3 210 */
 	/* 11|00|0100|10 01|100|0 00|10 0|100 0|011 1|100 */
 	/*  3| 0|.... ..| 1| 4 |  0 |  4 |   8 |   7 | 4  */
 
-#define CFG_DEV1_PAR		0xc01b6ac5
+#define CONFIG_SYS_DEV1_PAR		0xc01b6ac5
 	/*     c    0     1     b     6	    a     c     5 */
 	/* 33 22|2222|22 22|111 1|11 11|1 1  |	   |      */
 	/* 10 98|7654|32 10|987 6|54 32|1 098|7 654|3 210 */
@@ -228,18 +228,18 @@
 	/*  3| 0|.... ..| 1| 5 |  5 |  5 |   5 |   8 | 5  */
 
 
-#define CFG_8BIT_BOOT_PAR	0xc00b5e7c
+#define CONFIG_SYS_8BIT_BOOT_PAR	0xc00b5e7c
 
-#define CFG_MPP_CONTROL_0	0x00007777 /* GPP[7:4] : REQ0[1:0] GNT0[1:0] */
-#define CFG_MPP_CONTROL_1	0x00000000 /* GPP[15:12] : GPP[11:8] */
-#define CFG_MPP_CONTROL_2	0x00008888 /* GPP[23:20] : REQ1[1:0] GNT1[1:0] */
-#define CFG_MPP_CONTROL_3	0x00000000 /* GPP[31:28] (int[3:0]) */
+#define CONFIG_SYS_MPP_CONTROL_0	0x00007777 /* GPP[7:4] : REQ0[1:0] GNT0[1:0] */
+#define CONFIG_SYS_MPP_CONTROL_1	0x00000000 /* GPP[15:12] : GPP[11:8] */
+#define CONFIG_SYS_MPP_CONTROL_2	0x00008888 /* GPP[23:20] : REQ1[1:0] GNT1[1:0] */
+#define CONFIG_SYS_MPP_CONTROL_3	0x00000000 /* GPP[31:28] (int[3:0]) */
 					   /* GPP[27:24] (27 is int4, rest are GPP) */
 
-#define CFG_SERIAL_PORT_MUX	0x00001101 /* 11=MPSC1/MPSC0 01=ETH,  0=only MII */
-#define CFG_GPP_LEVEL_CONTROL	0xf8000000 /* interrupt inputs: GPP[31:27] */
+#define CONFIG_SYS_SERIAL_PORT_MUX	0x00001101 /* 11=MPSC1/MPSC0 01=ETH,  0=only MII */
+#define CONFIG_SYS_GPP_LEVEL_CONTROL	0xf8000000 /* interrupt inputs: GPP[31:27] */
 
-#define CFG_SDRAM_CONFIG	0xe4e18200	/* 0x448 */
+#define CONFIG_SYS_SDRAM_CONFIG	0xe4e18200	/* 0x448 */
 				/* idmas use buffer 1,1
 				   comm use buffer 1
 				   pci use buffer 0,0 (pci1->0 pci0->0)
@@ -257,10 +257,10 @@
 				/* 15 14 13:0 */
 				/* 1  0	 0x200 */
 
-#define CFG_DEV0_SPACE		CFG_DEV_BASE
-#define CFG_DEV1_SPACE		(CFG_DEV0_SPACE + CFG_DEV0_SIZE)
-#define CFG_DEV2_SPACE		(CFG_DEV1_SPACE + CFG_DEV1_SIZE)
-#define CFG_DEV3_SPACE		(CFG_DEV2_SPACE + CFG_DEV2_SIZE)
+#define CONFIG_SYS_DEV0_SPACE		CONFIG_SYS_DEV_BASE
+#define CONFIG_SYS_DEV1_SPACE		(CONFIG_SYS_DEV0_SPACE + CONFIG_SYS_DEV0_SIZE)
+#define CONFIG_SYS_DEV2_SPACE		(CONFIG_SYS_DEV1_SPACE + CONFIG_SYS_DEV1_SIZE)
+#define CONFIG_SYS_DEV3_SPACE		(CONFIG_SYS_DEV2_SPACE + CONFIG_SYS_DEV2_SIZE)
 
 /*-----------------------------------------------------------------------
  * PCI stuff
@@ -275,24 +275,24 @@
 #define CONFIG_PCI_PNP			/* do pci plug-and-play		*/
 
 /* PCI MEMORY MAP section */
-#define CFG_PCI0_MEM_BASE	0x80000000
-#define CFG_PCI0_MEM_SIZE	_128M
-#define CFG_PCI1_MEM_BASE	0x88000000
-#define CFG_PCI1_MEM_SIZE	_128M
+#define CONFIG_SYS_PCI0_MEM_BASE	0x80000000
+#define CONFIG_SYS_PCI0_MEM_SIZE	_128M
+#define CONFIG_SYS_PCI1_MEM_BASE	0x88000000
+#define CONFIG_SYS_PCI1_MEM_SIZE	_128M
 
-#define CFG_PCI0_0_MEM_SPACE	(CFG_PCI0_MEM_BASE)
-#define CFG_PCI1_0_MEM_SPACE	(CFG_PCI1_MEM_BASE)
+#define CONFIG_SYS_PCI0_0_MEM_SPACE	(CONFIG_SYS_PCI0_MEM_BASE)
+#define CONFIG_SYS_PCI1_0_MEM_SPACE	(CONFIG_SYS_PCI1_MEM_BASE)
 
 /* PCI I/O MAP section */
-#define CFG_PCI0_IO_BASE	0xfa000000
-#define CFG_PCI0_IO_SIZE	_16M
-#define CFG_PCI1_IO_BASE	0xfb000000
-#define CFG_PCI1_IO_SIZE	_16M
+#define CONFIG_SYS_PCI0_IO_BASE	0xfa000000
+#define CONFIG_SYS_PCI0_IO_SIZE	_16M
+#define CONFIG_SYS_PCI1_IO_BASE	0xfb000000
+#define CONFIG_SYS_PCI1_IO_SIZE	_16M
 
-#define CFG_PCI0_IO_SPACE	(CFG_PCI0_IO_BASE)
-#define CFG_PCI0_IO_SPACE_PCI	0x00000000
-#define CFG_PCI1_IO_SPACE	(CFG_PCI1_IO_BASE)
-#define CFG_PCI1_IO_SPACE_PCI	0x00000000
+#define CONFIG_SYS_PCI0_IO_SPACE	(CONFIG_SYS_PCI0_IO_BASE)
+#define CONFIG_SYS_PCI0_IO_SPACE_PCI	0x00000000
+#define CONFIG_SYS_PCI1_IO_SPACE	(CONFIG_SYS_PCI1_IO_BASE)
+#define CONFIG_SYS_PCI1_IO_SPACE_PCI	0x00000000
 
 
 /*----------------------------------------------------------------------
@@ -305,61 +305,61 @@
  */
 
 /* SDRAM */
-#define CFG_IBAT0L (CFG_SDRAM_BASE | BATL_PP_RW | BATL_CACHEINHIBIT)
-#define CFG_IBAT0U (CFG_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
-#define CFG_DBAT0L (CFG_SDRAM_BASE | BATL_PP_RW | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
-#define CFG_DBAT0U CFG_IBAT0U
+#define CONFIG_SYS_IBAT0L (CONFIG_SYS_SDRAM_BASE | BATL_PP_RW | BATL_CACHEINHIBIT)
+#define CONFIG_SYS_IBAT0U (CONFIG_SYS_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CONFIG_SYS_DBAT0L (CONFIG_SYS_SDRAM_BASE | BATL_PP_RW | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
+#define CONFIG_SYS_DBAT0U CONFIG_SYS_IBAT0U
 
 /* init ram */
-#define CFG_IBAT1L  (CFG_INIT_RAM_ADDR | BATL_PP_RW | BATL_MEMCOHERENCE)
-#define CFG_IBAT1U  (CFG_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP)
-#define CFG_DBAT1L  CFG_IBAT1L
-#define CFG_DBAT1U  CFG_IBAT1U
+#define CONFIG_SYS_IBAT1L  (CONFIG_SYS_INIT_RAM_ADDR | BATL_PP_RW | BATL_MEMCOHERENCE)
+#define CONFIG_SYS_IBAT1U  (CONFIG_SYS_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP)
+#define CONFIG_SYS_DBAT1L  CONFIG_SYS_IBAT1L
+#define CONFIG_SYS_DBAT1U  CONFIG_SYS_IBAT1U
 
 /* PCI0, PCI1 memory space (starting at PCI0 base, mapped in one BAT) */
-#define CFG_IBAT2L BATL_NO_ACCESS
-#define CFG_IBAT2U CFG_DBAT2U
-#define CFG_DBAT2L (CFG_PCI0_MEM_BASE | BATL_CACHEINHIBIT | BATL_PP_RW | BATL_GUARDEDSTORAGE)
-#define CFG_DBAT2U (CFG_PCI0_MEM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CONFIG_SYS_IBAT2L BATL_NO_ACCESS
+#define CONFIG_SYS_IBAT2U CONFIG_SYS_DBAT2U
+#define CONFIG_SYS_DBAT2L (CONFIG_SYS_PCI0_MEM_BASE | BATL_CACHEINHIBIT | BATL_PP_RW | BATL_GUARDEDSTORAGE)
+#define CONFIG_SYS_DBAT2U (CONFIG_SYS_PCI0_MEM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
 
 /* GT regs, bootrom, all the devices, PCI I/O */
-#define CFG_IBAT3L (CFG_MISC_REGION_BASE | BATL_CACHEINHIBIT | BATL_PP_RW)
-#define CFG_IBAT3U (CFG_MISC_REGION_BASE | BATU_VS | BATU_VP | BATU_BL_256M)
-#define CFG_DBAT3L (CFG_MISC_REGION_BASE | BATL_CACHEINHIBIT | BATL_PP_RW | BATL_GUARDEDSTORAGE)
-#define CFG_DBAT3U CFG_IBAT3U
+#define CONFIG_SYS_IBAT3L (CONFIG_SYS_MISC_REGION_BASE | BATL_CACHEINHIBIT | BATL_PP_RW)
+#define CONFIG_SYS_IBAT3U (CONFIG_SYS_MISC_REGION_BASE | BATU_VS | BATU_VP | BATU_BL_256M)
+#define CONFIG_SYS_DBAT3L (CONFIG_SYS_MISC_REGION_BASE | BATL_CACHEINHIBIT | BATL_PP_RW | BATL_GUARDEDSTORAGE)
+#define CONFIG_SYS_DBAT3U CONFIG_SYS_IBAT3U
 
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define CFG_BOOTMAPSZ		(8<<20) /* Initial Memory map for Linux */
+#define CONFIG_SYS_BOOTMAPSZ		(8<<20) /* Initial Memory map for Linux */
 
 
 /*-----------------------------------------------------------------------
  * FLASH organization
  */
-#define CFG_MAX_FLASH_BANKS	3	/* max number of memory banks	*/
-#define CFG_MAX_FLASH_SECT	130	/* max number of sectors on one chip */
+#define CONFIG_SYS_MAX_FLASH_BANKS	3	/* max number of memory banks	*/
+#define CONFIG_SYS_MAX_FLASH_SECT	130	/* max number of sectors on one chip */
 
-#define CFG_EXTRA_FLASH_DEVICE	DEVICE0 /* extra flash at device 0 */
-#define CFG_EXTRA_FLASH_WIDTH	2	/* 16 bit */
+#define CONFIG_SYS_EXTRA_FLASH_DEVICE	DEVICE0 /* extra flash at device 0 */
+#define CONFIG_SYS_EXTRA_FLASH_WIDTH	2	/* 16 bit */
 
-#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms) */
-#define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms) */
-#define CFG_FLASH_CFI		1
+#define CONFIG_SYS_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms) */
+#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms) */
+#define CONFIG_SYS_FLASH_CFI		1
 
-#define CFG_ENV_IS_IN_FLASH	1
-#define CFG_ENV_SIZE		0x1000	/* Total Size of Environment Sector */
-#define CFG_ENV_SECT_SIZE	0x10000 /* see README - env sect real size */
-#define CFG_ENV_ADDR		(0xfff80000 - CFG_ENV_SECT_SIZE)
+#define CONFIG_ENV_IS_IN_FLASH	1
+#define CONFIG_ENV_SIZE		0x1000	/* Total Size of Environment Sector */
+#define CONFIG_ENV_SECT_SIZE	0x10000 /* see README - env sect real size */
+#define CONFIG_ENV_ADDR		(0xfff80000 - CONFIG_ENV_SECT_SIZE)
 
 /*-----------------------------------------------------------------------
  * Cache Configuration
  */
-#define CFG_CACHELINE_SIZE	32	/* For all MPC74xx CPUs		 */
+#define CONFIG_SYS_CACHELINE_SIZE	32	/* For all MPC74xx CPUs		 */
 #if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value */
+#define CONFIG_SYS_CACHELINE_SHIFT	5	/* log base 2 of the above value */
 #endif
 
 /*-----------------------------------------------------------------------
@@ -367,7 +367,7 @@
  * look in include/74xx_7xx.h for the defines used here
  */
 
-#define CFG_L2
+#define CONFIG_SYS_L2
 
 #ifdef CONFIG_750CX
 #define L2_INIT		0
diff --git a/include/configs/acadia.h b/include/configs/acadia.h
index ed2754d66..52ccdb5b9 100644
--- a/include/configs/acadia.h
+++ b/include/configs/acadia.h
@@ -42,7 +42,7 @@
 #include "amcc-common.h"
 
 /* Detect Acadia PLL input clock automatically via CPLD bit		*/
-#define CONFIG_SYS_CLK_FREQ    ((in8(CFG_CPLD_BASE + 0) == 0x0c) ? \
+#define CONFIG_SYS_CLK_FREQ    ((in8(CONFIG_SYS_CPLD_BASE + 0) == 0x0c) ? \
 				66666666 : 33333000)
 
 #define CONFIG_BOARD_EARLY_INIT_F 1		/* Call board_early_init_f */
@@ -66,71 +66,71 @@
  * Base addresses -- Note these are effective addresses where the
  * actual resources get mapped (not physical addresses)
  *----------------------------------------------------------------------*/
-#define CFG_FLASH_BASE		0xfe000000
-#define CFG_CPLD_BASE		0x80000000
-#define CFG_NAND_ADDR		0xd0000000
-#define CFG_USB_HOST		0xef603000	/* USB OHCI 1.1 controller	*/
+#define CONFIG_SYS_FLASH_BASE		0xfe000000
+#define CONFIG_SYS_CPLD_BASE		0x80000000
+#define CONFIG_SYS_NAND_ADDR		0xd0000000
+#define CONFIG_SYS_USB_HOST		0xef603000	/* USB OHCI 1.1 controller	*/
 
 /*-----------------------------------------------------------------------
  * Initial RAM & stack pointer
  *----------------------------------------------------------------------*/
-#define CFG_TEMP_STACK_OCM	1		/* OCM as init ram	*/
+#define CONFIG_SYS_TEMP_STACK_OCM	1		/* OCM as init ram	*/
 
 /* On Chip Memory location */
-#define CFG_OCM_DATA_ADDR	0xf8000000
-#define CFG_OCM_DATA_SIZE	0x4000			/* 16K of onchip SRAM		*/
-#define CFG_INIT_RAM_ADDR	CFG_OCM_DATA_ADDR	/* inside of SRAM		*/
-#define CFG_INIT_RAM_END	CFG_OCM_DATA_SIZE	/* End of used area in RAM	*/
+#define CONFIG_SYS_OCM_DATA_ADDR	0xf8000000
+#define CONFIG_SYS_OCM_DATA_SIZE	0x4000			/* 16K of onchip SRAM		*/
+#define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_OCM_DATA_ADDR	/* inside of SRAM		*/
+#define CONFIG_SYS_INIT_RAM_END	CONFIG_SYS_OCM_DATA_SIZE	/* End of used area in RAM	*/
 
-#define CFG_GBL_DATA_SIZE	128			/* size for initial data	*/
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_GBL_DATA_SIZE	128			/* size for initial data	*/
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
 /*-----------------------------------------------------------------------
  * Serial Port
  *----------------------------------------------------------------------*/
-#undef	CFG_EXT_SERIAL_CLOCK			/* external serial clock */
-#define CFG_BASE_BAUD		691200
+#undef	CONFIG_SYS_EXT_SERIAL_CLOCK			/* external serial clock */
+#define CONFIG_SYS_BASE_BAUD		691200
 
 /*-----------------------------------------------------------------------
  * Environment
  *----------------------------------------------------------------------*/
 #if !defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL)
-#define CFG_ENV_IS_IN_FLASH     1	/* use FLASH for environment vars	*/
+#define CONFIG_ENV_IS_IN_FLASH     1	/* use FLASH for environment vars	*/
 #else
-#define CFG_ENV_IS_IN_NAND	1	/* use NAND for environment vars	*/
-#define CFG_ENV_IS_EMBEDDED	1	/* use embedded environment */
+#define CONFIG_ENV_IS_IN_NAND	1	/* use NAND for environment vars	*/
+#define CONFIG_ENV_IS_EMBEDDED	1	/* use embedded environment */
 #endif
 
 /*-----------------------------------------------------------------------
  * FLASH related
  *----------------------------------------------------------------------*/
 #if !defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL)
-#define CFG_FLASH_CFI			/* The flash is CFI compatible	*/
+#define CONFIG_SYS_FLASH_CFI			/* The flash is CFI compatible	*/
 #define CONFIG_FLASH_CFI_DRIVER		/* Use common CFI driver	*/
 
-#define CFG_FLASH_BANKS_LIST    {CFG_FLASH_BASE}
-#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
-#define CFG_MAX_FLASH_SECT	512	/* max number of sectors on one chip	*/
+#define CONFIG_SYS_FLASH_BANKS_LIST    {CONFIG_SYS_FLASH_BASE}
+#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
+#define CONFIG_SYS_MAX_FLASH_SECT	512	/* max number of sectors on one chip	*/
 
-#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
-#define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
+#define CONFIG_SYS_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
+#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
 
-#define CFG_FLASH_USE_BUFFER_WRITE 1	/* use buffered writes (20x faster)	*/
-#define CFG_FLASH_EMPTY_INFO		/* print 'E' for empty sector on flinfo */
+#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1	/* use buffered writes (20x faster)	*/
+#define CONFIG_SYS_FLASH_EMPTY_INFO		/* print 'E' for empty sector on flinfo */
 
 #else
-#define	CFG_NO_FLASH		1	/* No NOR on Acadia when NAND-booting	*/
+#define	CONFIG_SYS_NO_FLASH		1	/* No NOR on Acadia when NAND-booting	*/
 #endif
 
-#ifdef CFG_ENV_IS_IN_FLASH
-#define CFG_ENV_SECT_SIZE	0x40000 /* size of one complete sector	*/
-#define CFG_ENV_ADDR		(CFG_MONITOR_BASE-CFG_ENV_SECT_SIZE)
-#define	CFG_ENV_SIZE		0x4000	/* Total Size of Environment Sector	*/
+#ifdef CONFIG_ENV_IS_IN_FLASH
+#define CONFIG_ENV_SECT_SIZE	0x40000 /* size of one complete sector	*/
+#define CONFIG_ENV_ADDR		(CONFIG_SYS_MONITOR_BASE-CONFIG_ENV_SECT_SIZE)
+#define	CONFIG_ENV_SIZE		0x4000	/* Total Size of Environment Sector	*/
 
 /* Address and size of Redundant Environment Sector	*/
-#define CFG_ENV_ADDR_REDUND	(CFG_ENV_ADDR-CFG_ENV_SECT_SIZE)
-#define CFG_ENV_SIZE_REDUND	(CFG_ENV_SIZE)
+#define CONFIG_ENV_ADDR_REDUND	(CONFIG_ENV_ADDR-CONFIG_ENV_SECT_SIZE)
+#define CONFIG_ENV_SIZE_REDUND	(CONFIG_ENV_SIZE)
 #endif
 
 /*
@@ -151,69 +151,68 @@
  * set up. While still running from cache, I experienced problems accessing
  * the NAND controller.	sr - 2006-08-25
  */
-#define CFG_NAND_BOOT_SPL_SRC	0xfffff000	/* SPL location			*/
-#define CFG_NAND_BOOT_SPL_SIZE	(4 << 10)	/* SPL size			*/
-#define CFG_NAND_BOOT_SPL_DST	(CFG_OCM_DATA_ADDR + (16 << 10)) /* Copy SPL here*/
-#define CFG_NAND_U_BOOT_DST	0x01000000	/* Load NUB to this addr	*/
-#define CFG_NAND_U_BOOT_START	CFG_NAND_U_BOOT_DST /* Start NUB from this addr	*/
-#define CFG_NAND_BOOT_SPL_DELTA	(CFG_NAND_BOOT_SPL_SRC - CFG_NAND_BOOT_SPL_DST)
+#define CONFIG_SYS_NAND_BOOT_SPL_SRC	0xfffff000	/* SPL location			*/
+#define CONFIG_SYS_NAND_BOOT_SPL_SIZE	(4 << 10)	/* SPL size			*/
+#define CONFIG_SYS_NAND_BOOT_SPL_DST	(CONFIG_SYS_OCM_DATA_ADDR + (16 << 10)) /* Copy SPL here*/
+#define CONFIG_SYS_NAND_U_BOOT_DST	0x01000000	/* Load NUB to this addr	*/
+#define CONFIG_SYS_NAND_U_BOOT_START	CONFIG_SYS_NAND_U_BOOT_DST /* Start NUB from this addr	*/
+#define CONFIG_SYS_NAND_BOOT_SPL_DELTA	(CONFIG_SYS_NAND_BOOT_SPL_SRC - CONFIG_SYS_NAND_BOOT_SPL_DST)
 
 /*
  * Define the partitioning of the NAND chip (only RAM U-Boot is needed here)
  */
-#define CFG_NAND_U_BOOT_OFFS	(16 << 10)	/* Offset to RAM U-Boot image	*/
-#define CFG_NAND_U_BOOT_SIZE	(384 << 10)	/* Size of RAM U-Boot image	*/
+#define CONFIG_SYS_NAND_U_BOOT_OFFS	(16 << 10)	/* Offset to RAM U-Boot image	*/
+#define CONFIG_SYS_NAND_U_BOOT_SIZE	(384 << 10)	/* Size of RAM U-Boot image	*/
 
 /*
  * Now the NAND chip has to be defined (no autodetection used!)
  */
-#define CFG_NAND_PAGE_SIZE	512		/* NAND chip page size		*/
-#define CFG_NAND_BLOCK_SIZE	(16 << 10)	/* NAND chip block size		*/
-#define CFG_NAND_PAGE_COUNT	32		/* NAND chip page count		*/
-#define CFG_NAND_BAD_BLOCK_POS	5		/* Location of bad block marker	*/
-#undef CFG_NAND_4_ADDR_CYCLE			/* No fourth addr used (<=32MB)	*/
-
-#define CFG_NAND_ECCSIZE	256
-#define CFG_NAND_ECCBYTES	3
-#define CFG_NAND_ECCSTEPS	(CFG_NAND_PAGE_SIZE / CFG_NAND_ECCSIZE)
-#define CFG_NAND_OOBSIZE	16
-#define CFG_NAND_ECCTOTAL	(CFG_NAND_ECCBYTES * CFG_NAND_ECCSTEPS)
-#define CFG_NAND_ECCPOS		{0, 1, 2, 3, 6, 7}
-
-#ifdef CFG_ENV_IS_IN_NAND
+#define CONFIG_SYS_NAND_PAGE_SIZE	512		/* NAND chip page size		*/
+#define CONFIG_SYS_NAND_BLOCK_SIZE	(16 << 10)	/* NAND chip block size		*/
+#define CONFIG_SYS_NAND_PAGE_COUNT	32		/* NAND chip page count		*/
+#define CONFIG_SYS_NAND_BAD_BLOCK_POS	5		/* Location of bad block marker	*/
+#undef CONFIG_SYS_NAND_4_ADDR_CYCLE			/* No fourth addr used (<=32MB)	*/
+
+#define CONFIG_SYS_NAND_ECCSIZE	256
+#define CONFIG_SYS_NAND_ECCBYTES	3
+#define CONFIG_SYS_NAND_ECCSTEPS	(CONFIG_SYS_NAND_PAGE_SIZE / CONFIG_SYS_NAND_ECCSIZE)
+#define CONFIG_SYS_NAND_OOBSIZE	16
+#define CONFIG_SYS_NAND_ECCTOTAL	(CONFIG_SYS_NAND_ECCBYTES * CONFIG_SYS_NAND_ECCSTEPS)
+#define CONFIG_SYS_NAND_ECCPOS		{0, 1, 2, 3, 6, 7}
+
+#ifdef CONFIG_ENV_IS_IN_NAND
 /*
  * For NAND booting the environment is embedded in the U-Boot image. Please take
  * look at the file board/amcc/sequoia/u-boot-nand.lds for details.
  */
-#define CFG_ENV_SIZE		CFG_NAND_BLOCK_SIZE
-#define CFG_ENV_OFFSET		(CFG_NAND_U_BOOT_OFFS + CFG_ENV_SIZE)
-#define CFG_ENV_OFFSET_REDUND	(CFG_ENV_OFFSET + CFG_ENV_SIZE)
+#define CONFIG_ENV_SIZE		CONFIG_SYS_NAND_BLOCK_SIZE
+#define CONFIG_ENV_OFFSET		(CONFIG_SYS_NAND_U_BOOT_OFFS + CONFIG_ENV_SIZE)
+#define CONFIG_ENV_OFFSET_REDUND	(CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)
 #endif
 
 /*-----------------------------------------------------------------------
  * RAM (CRAM)
  *----------------------------------------------------------------------*/
-#define CFG_MBYTES_RAM		64		/* 64MB			*/
+#define CONFIG_SYS_MBYTES_RAM		64		/* 64MB			*/
 
 /*-----------------------------------------------------------------------
  * I2C
  *----------------------------------------------------------------------*/
-#define CFG_I2C_SPEED		400000		/* I2C speed and slave address	*/
+#define CONFIG_SYS_I2C_SPEED		400000		/* I2C speed and slave address	*/
 
-#define CFG_I2C_MULTI_EEPROMS
-#define CFG_I2C_EEPROM_ADDR	(0xa8>>1)
-#define CFG_I2C_EEPROM_ADDR_LEN 1
-#define CFG_EEPROM_PAGE_WRITE_ENABLE
-#define CFG_EEPROM_PAGE_WRITE_BITS 3
-#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10
+#define CONFIG_SYS_I2C_MULTI_EEPROMS
+#define CONFIG_SYS_I2C_EEPROM_ADDR	(0xa8>>1)
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10
 
 /* I2C SYSMON (LM75, AD7414 is almost compatible)			*/
 #define CONFIG_DTT_LM75		1		/* ON Semi's LM75	*/
 #define CONFIG_DTT_AD7414	1		/* use AD7414		*/
 #define CONFIG_DTT_SENSORS	{0}		/* Sensor addresses	*/
-#define CFG_DTT_MAX_TEMP	70
-#define CFG_DTT_LOW_TEMP	-30
-#define CFG_DTT_HYSTERESIS	3
+#define CONFIG_SYS_DTT_MAX_TEMP	70
+#define CONFIG_SYS_DTT_LOW_TEMP	-30
+#define CONFIG_SYS_DTT_HYSTERESIS	3
 
 /*-----------------------------------------------------------------------
  * Ethernet
@@ -262,64 +261,64 @@
 /*-----------------------------------------------------------------------
  * NAND FLASH
  *----------------------------------------------------------------------*/
-#define CFG_MAX_NAND_DEVICE	1
+#define CONFIG_SYS_MAX_NAND_DEVICE	1
 #define NAND_MAX_CHIPS		1
-#define CFG_NAND_BASE		(CFG_NAND_ADDR + CFG_NAND_CS)
-#define CFG_NAND_SELECT_DEVICE  1	/* nand driver supports mutipl. chips	*/
+#define CONFIG_SYS_NAND_BASE		(CONFIG_SYS_NAND_ADDR + CONFIG_SYS_NAND_CS)
+#define CONFIG_SYS_NAND_SELECT_DEVICE  1	/* nand driver supports mutipl. chips	*/
 
 /*-----------------------------------------------------------------------
  * External Bus Controller (EBC) Setup
  *----------------------------------------------------------------------*/
 #if !defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL)
-#define CFG_NAND_CS		3
+#define CONFIG_SYS_NAND_CS		3
 /* Memory Bank 0 (Flash) initialization						*/
-#define CFG_EBC_PB0AP		0x03337200
-#define CFG_EBC_PB0CR		0xfe0bc000
+#define CONFIG_SYS_EBC_PB0AP		0x03337200
+#define CONFIG_SYS_EBC_PB0CR		0xfe0bc000
 
 /* Memory Bank 3 (NAND-FLASH) initialization					*/
-#define CFG_EBC_PB3AP		0x018003c0
-#define CFG_EBC_PB3CR		(CFG_NAND_ADDR | 0x1c000)
+#define CONFIG_SYS_EBC_PB3AP		0x018003c0
+#define CONFIG_SYS_EBC_PB3CR		(CONFIG_SYS_NAND_ADDR | 0x1c000)
 
 /* Just initial configuration for CRAM. Will be changed in memory.c to sync mode*/
 /* Memory Bank 1 (CRAM) initialization						*/
-#define CFG_EBC_PB1AP		0x030400c0
-#define CFG_EBC_PB1CR		0x000bc000
+#define CONFIG_SYS_EBC_PB1AP		0x030400c0
+#define CONFIG_SYS_EBC_PB1CR		0x000bc000
 
 /* Memory Bank 2 (CRAM) initialization						*/
-#define CFG_EBC_PB2AP		0x030400c0
-#define CFG_EBC_PB2CR		0x020bc000
+#define CONFIG_SYS_EBC_PB2AP		0x030400c0
+#define CONFIG_SYS_EBC_PB2CR		0x020bc000
 #else
-#define CFG_NAND_CS		0		/* NAND chip connected to CSx	*/
+#define CONFIG_SYS_NAND_CS		0		/* NAND chip connected to CSx	*/
 /* Memory Bank 0 (NAND-FLASH) initialization					*/
-#define CFG_EBC_PB0AP		0x018003c0
-#define CFG_EBC_PB0CR		(CFG_NAND_ADDR | 0x1c000)
+#define CONFIG_SYS_EBC_PB0AP		0x018003c0
+#define CONFIG_SYS_EBC_PB0CR		(CONFIG_SYS_NAND_ADDR | 0x1c000)
 
 /*
  * When NAND-booting the CRAM EBC setup must be done in sync mode, since the
  * NAND-SPL already initialized the CRAM and EBC to sync mode.
  */
 /* Memory Bank 1 (CRAM) initialization						*/
-#define CFG_EBC_PB1AP		0x9C0201C0
-#define CFG_EBC_PB1CR		0x000bc000
+#define CONFIG_SYS_EBC_PB1AP		0x9C0201C0
+#define CONFIG_SYS_EBC_PB1CR		0x000bc000
 
 /* Memory Bank 2 (CRAM) initialization						*/
-#define CFG_EBC_PB2AP		0x9C0201C0
-#define CFG_EBC_PB2CR		0x020bc000
+#define CONFIG_SYS_EBC_PB2AP		0x9C0201C0
+#define CONFIG_SYS_EBC_PB2CR		0x020bc000
 #endif
 
 /* Memory Bank 4 (CPLD) initialization						*/
-#define CFG_EBC_PB4AP		0x04006000
-#define CFG_EBC_PB4CR		(CFG_CPLD_BASE | 0x18000)
+#define CONFIG_SYS_EBC_PB4AP		0x04006000
+#define CONFIG_SYS_EBC_PB4CR		(CONFIG_SYS_CPLD_BASE | 0x18000)
 
-#define CFG_EBC_CFG		0xf8400000
+#define CONFIG_SYS_EBC_CFG		0xf8400000
 
 /*-----------------------------------------------------------------------
  * GPIO Setup
  *----------------------------------------------------------------------*/
-#define CFG_GPIO_CRAM_CLK	8
-#define CFG_GPIO_CRAM_WAIT	9		/* GPIO-In		*/
-#define CFG_GPIO_CRAM_ADV	10
-#define CFG_GPIO_CRAM_CRE	(32 + 21)	/* GPIO-Out		*/
+#define CONFIG_SYS_GPIO_CRAM_CLK	8
+#define CONFIG_SYS_GPIO_CRAM_WAIT	9		/* GPIO-In		*/
+#define CONFIG_SYS_GPIO_CRAM_ADV	10
+#define CONFIG_SYS_GPIO_CRAM_CRE	(32 + 21)	/* GPIO-Out		*/
 
 /*-----------------------------------------------------------------------
  * Definitions for GPIO_0 setup (PPC405EZ specific)
@@ -341,13 +340,13 @@
  * GPIO0[28-30]	- Trace Outputs / PWM Inputs
  * GPIO0[31]	- PWM_8 I/O
  */
-#define CFG_GPIO0_TCR		0xC0A00000
-#define CFG_GPIO0_OSRL		0x50004400
-#define CFG_GPIO0_OSRH		0x02000055
-#define CFG_GPIO0_ISR1L		0x00001000
-#define CFG_GPIO0_ISR1H		0x00000055
-#define CFG_GPIO0_TSRL		0x02000000
-#define CFG_GPIO0_TSRH		0x00000055
+#define CONFIG_SYS_GPIO0_TCR		0xC0A00000
+#define CONFIG_SYS_GPIO0_OSRL		0x50004400
+#define CONFIG_SYS_GPIO0_OSRH		0x02000055
+#define CONFIG_SYS_GPIO0_ISR1L		0x00001000
+#define CONFIG_SYS_GPIO0_ISR1H		0x00000055
+#define CONFIG_SYS_GPIO0_TSRL		0x02000000
+#define CONFIG_SYS_GPIO0_TSRH		0x00000055
 
 /*-----------------------------------------------------------------------
  * Definitions for GPIO_1 setup (PPC405EZ specific)
@@ -363,12 +362,12 @@
  * GPIO1[16]	- SPI_SS_1_N Output
  * GPIO1[17-20]	- Trace Output/External Interrupts IRQ0 - IRQ3 inputs
  */
-#define CFG_GPIO1_TCR		0xFFFF8414
-#define CFG_GPIO1_OSRL		0x40000110
-#define CFG_GPIO1_OSRH		0x55455555
-#define CFG_GPIO1_ISR1L		0x15555445
-#define CFG_GPIO1_ISR1H		0x00000000
-#define CFG_GPIO1_TSRL		0x00000000
-#define CFG_GPIO1_TSRH		0x00000000
+#define CONFIG_SYS_GPIO1_TCR		0xFFFF8414
+#define CONFIG_SYS_GPIO1_OSRL		0x40000110
+#define CONFIG_SYS_GPIO1_OSRH		0x55455555
+#define CONFIG_SYS_GPIO1_ISR1L		0x15555445
+#define CONFIG_SYS_GPIO1_ISR1H		0x00000000
+#define CONFIG_SYS_GPIO1_TSRL		0x00000000
+#define CONFIG_SYS_GPIO1_TSRH		0x00000000
 
 #endif	/* __CONFIG_H */
diff --git a/include/configs/actux1.h b/include/configs/actux1.h
index 33a74949a..a3b04b1af 100644
--- a/include/configs/actux1.h
+++ b/include/configs/actux1.h
@@ -39,7 +39,7 @@
 #define CONFIG_DISPLAY_CPUINFO		1
 #define CONFIG_DISPLAY_BOARDINFO	1
 
-#define CFG_IXP425_CONSOLE		IXP425_UART2
+#define CONFIG_SYS_IXP425_CONSOLE		IXP425_UART2
 #define CONFIG_BAUDRATE			115200
 #define CONFIG_BOOTDELAY		3
 #define CONFIG_ZERO_BOOTDELAY_CHECK	/* check for keypress on bootdelay==0 */
@@ -52,9 +52,9 @@
 /*
  * Size of malloc() pool
  */
-#define CFG_MALLOC_LEN			(CFG_ENV_SIZE + 128*1024)
+#define CONFIG_SYS_MALLOC_LEN			(CONFIG_ENV_SIZE + 128*1024)
 /* size in bytes reserved for initial data */
-#define CFG_GBL_DATA_SIZE		128
+#define CONFIG_SYS_GBL_DATA_SIZE		128
 
 /* allow to overwrite serial and ethaddr */
 #define CONFIG_ENV_OVERWRITE
@@ -80,30 +80,30 @@
 #endif
 
 /* Miscellaneous configurable options */
-#define CFG_LONGHELP
-#define CFG_PROMPT			"=> "
+#define CONFIG_SYS_LONGHELP
+#define CONFIG_SYS_PROMPT			"=> "
 /* Console I/O Buffer Size */
-#define CFG_CBSIZE			256
+#define CONFIG_SYS_CBSIZE			256
 /* Print Buffer Size */
-#define CFG_PBSIZE			(CFG_CBSIZE+sizeof(CFG_PROMPT)+16)
+#define CONFIG_SYS_PBSIZE			(CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
 /* max number of command args */
-#define CFG_MAXARGS			16
+#define CONFIG_SYS_MAXARGS			16
 /* Boot Argument Buffer Size */
-#define CFG_BARGSIZE			CFG_CBSIZE
+#define CONFIG_SYS_BARGSIZE			CONFIG_SYS_CBSIZE
 
-#define CFG_MEMTEST_START		0x00400000
-#define CFG_MEMTEST_END			0x00800000
+#define CONFIG_SYS_MEMTEST_START		0x00400000
+#define CONFIG_SYS_MEMTEST_END			0x00800000
 
 /* everything, incl board info, in Hz */
-#undef  CFG_CLKS_IN_HZ
+#undef  CONFIG_SYS_CLKS_IN_HZ
 /* spec says 66.666 MHz, but it appears to be 33 */
-#define CFG_HZ				3333333
+#define CONFIG_SYS_HZ				3333333
 
 /* default load address */
-#define CFG_LOAD_ADDR			0x00010000
+#define CONFIG_SYS_LOAD_ADDR			0x00010000
 
 /* valid baudrates */
-#define CFG_BAUDRATE_TABLE		{ 9600, 19200, 38400, 57600,	\
+#define CONFIG_SYS_BAUDRATE_TABLE		{ 9600, 19200, 38400, 57600,	\
 					  115200, 230400 }
 #define CONFIG_SERIAL_RTS_ACTIVE	1
 
@@ -118,55 +118,55 @@
 #endif
 
 /* Expansion bus settings */
-#define CFG_EXP_CS0			0xbd113842
+#define CONFIG_SYS_EXP_CS0			0xbd113842
 
 /* SDRAM settings */
 #define CONFIG_NR_DRAM_BANKS		1
 #define PHYS_SDRAM_1			0x00000000
-#define CFG_DRAM_BASE			0x00000000
+#define CONFIG_SYS_DRAM_BASE			0x00000000
 
 #if CONFIG_ACTUX1_32MB
-# define CFG_SDR_CONFIG			0x18
+# define CONFIG_SYS_SDR_CONFIG			0x18
 # define PHYS_SDRAM_1_SIZE		0x02000000
-# define CFG_SDRAM_REFRESH_CNT		0x81a
-# define CFG_SDR_MODE_CONFIG		0x1
-# define CFG_DRAM_SIZE			0x02000000
+# define CONFIG_SYS_SDRAM_REFRESH_CNT		0x81a
+# define CONFIG_SYS_SDR_MODE_CONFIG		0x1
+# define CONFIG_SYS_DRAM_SIZE			0x02000000
 #else /* 16MB SDRAM */
-# define CFG_SDR_CONFIG			0x3A
+# define CONFIG_SYS_SDR_CONFIG			0x3A
 # define PHYS_SDRAM_1_SIZE		0x01000000
-# define CFG_SDRAM_REFRESH_CNT		0x81a
-# define CFG_SDR_MODE_CONFIG		0x1
-# define CFG_DRAM_SIZE			0x01000000
+# define CONFIG_SYS_SDRAM_REFRESH_CNT		0x81a
+# define CONFIG_SYS_SDR_MODE_CONFIG		0x1
+# define CONFIG_SYS_DRAM_SIZE			0x01000000
 #endif
 
 /* FLASH organization */
 #if CONFIG_ACTUX1_FLASH2X2
-# define CFG_MAX_FLASH_BANKS		2
+# define CONFIG_SYS_MAX_FLASH_BANKS		2
 /* max number of sectors on one chip */
-# define CFG_MAX_FLASH_SECT		40
+# define CONFIG_SYS_MAX_FLASH_SECT		40
 # define PHYS_FLASH_1			0x50000000
 # define PHYS_FLASH_2			0x50200000
-# define CFG_FLASH_BANKS_LIST		{ PHYS_FLASH_1, PHYS_FLASH_2 }
+# define CONFIG_SYS_FLASH_BANKS_LIST		{ PHYS_FLASH_1, PHYS_FLASH_2 }
 #endif
 #if CONFIG_ACTUX1_FLASH1X8
-# define CFG_MAX_FLASH_BANKS		1
+# define CONFIG_SYS_MAX_FLASH_BANKS		1
 /* max number of sectors on one chip */
-# define CFG_MAX_FLASH_SECT		140
+# define CONFIG_SYS_MAX_FLASH_SECT		140
 # define PHYS_FLASH_1			0x50000000
-# define CFG_FLASH_BANKS_LIST		{ PHYS_FLASH_1 }
+# define CONFIG_SYS_FLASH_BANKS_LIST		{ PHYS_FLASH_1 }
 #endif
 
-#define CFG_FLASH_BASE			PHYS_FLASH_1
-#define CFG_MONITOR_BASE		PHYS_FLASH_1
-#define CFG_MONITOR_LEN			(256 << 10)
+#define CONFIG_SYS_FLASH_BASE			PHYS_FLASH_1
+#define CONFIG_SYS_MONITOR_BASE		PHYS_FLASH_1
+#define CONFIG_SYS_MONITOR_LEN			(256 << 10)
 
 /* Use common CFI driver */
-#define CFG_FLASH_CFI
+#define CONFIG_SYS_FLASH_CFI
 #define CONFIG_FLASH_CFI_DRIVER
 /* no byte writes on IXP4xx */
-#define CFG_FLASH_CFI_WIDTH		FLASH_CFI_16BIT
+#define CONFIG_SYS_FLASH_CFI_WIDTH		FLASH_CFI_16BIT
 /* print 'E' for empty sector on flinfo */
-#define CFG_FLASH_EMPTY_INFO
+#define CONFIG_SYS_FLASH_EMPTY_INFO
 
 /* Ethernet */
 
@@ -180,7 +180,7 @@
 /* MII PHY management */
 #define CONFIG_MII			1
 /* Number of ethernet rx buffers & descriptors */
-#define CFG_RX_ETH_BUFFER		16
+#define CONFIG_SYS_RX_ETH_BUFFER		16
 #define CONFIG_RESET_PHY_R		1
 
 #define CONFIG_CMD_DHCP
@@ -196,16 +196,16 @@
 #define CONFIG_BOOTP_HOSTNAME
 
 /* Cache Configuration */
-#define CFG_CACHELINE_SIZE		32
+#define CONFIG_SYS_CACHELINE_SIZE		32
 
 /*
  * environment organization:
  * one flash sector, embedded in uboot area (bottom bootblock flash)
  */
-#define	CFG_ENV_IS_IN_FLASH		1
-#define CFG_ENV_SIZE			0x2000
-#define CFG_ENV_ADDR			(PHYS_FLASH_1 + 0x4000)
-#define CFG_USE_PPCENV			1
+#define	CONFIG_ENV_IS_IN_FLASH		1
+#define CONFIG_ENV_SIZE			0x2000
+#define CONFIG_ENV_ADDR			(PHYS_FLASH_1 + 0x4000)
+#define CONFIG_SYS_USE_PPCENV			1
 
 #define CONFIG_EXTRA_ENV_SETTINGS \
 	"mtd=IXP4XX-Flash.0:256k(uboot),64k(ucode),1152k(linux),-(root)\0" \
diff --git a/include/configs/actux2.h b/include/configs/actux2.h
index 75aaa1184..7e6e8f282 100644
--- a/include/configs/actux2.h
+++ b/include/configs/actux2.h
@@ -32,7 +32,7 @@
 #define CONFIG_DISPLAY_CPUINFO		1
 #define CONFIG_DISPLAY_BOARDINFO	1
 
-#define CFG_IXP425_CONSOLE		IXP425_UART2
+#define CONFIG_SYS_IXP425_CONSOLE		IXP425_UART2
 #define CONFIG_BAUDRATE			115200
 #define CONFIG_BOOTDELAY		5
 #define CONFIG_ZERO_BOOTDELAY_CHECK	/* check for keypress on bootdelay==0 */
@@ -43,9 +43,9 @@
 #undef CONFIG_USE_IRQ
 
 /* Size of malloc() pool */
-#define CFG_MALLOC_LEN			(CFG_ENV_SIZE + 128*1024)
+#define CONFIG_SYS_MALLOC_LEN			(CONFIG_ENV_SIZE + 128*1024)
 /* size in bytes reserved for initial data */
-#define CFG_GBL_DATA_SIZE		128
+#define CONFIG_SYS_GBL_DATA_SIZE		128
 
 /* allow to overwrite serial and ethaddr */
 #define CONFIG_ENV_OVERWRITE
@@ -71,30 +71,30 @@
 #endif
 
 /* Miscellaneous configurable options */
-#define CFG_LONGHELP
-#define CFG_PROMPT			"=> "
+#define CONFIG_SYS_LONGHELP
+#define CONFIG_SYS_PROMPT			"=> "
 /* Console I/O Buffer Size */
-#define CFG_CBSIZE			256
+#define CONFIG_SYS_CBSIZE			256
 /* Print Buffer Size */
-#define CFG_PBSIZE			(CFG_CBSIZE+sizeof(CFG_PROMPT)+16)
+#define CONFIG_SYS_PBSIZE			(CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
 /* max number of command args */
-#define CFG_MAXARGS			16
+#define CONFIG_SYS_MAXARGS			16
 /* Boot Argument Buffer Size */
-#define CFG_BARGSIZE			CFG_CBSIZE
+#define CONFIG_SYS_BARGSIZE			CONFIG_SYS_CBSIZE
 
-#define CFG_MEMTEST_START		0x00400000
-#define CFG_MEMTEST_END			0x00800000
+#define CONFIG_SYS_MEMTEST_START		0x00400000
+#define CONFIG_SYS_MEMTEST_END			0x00800000
 
 /* everything, incl board info, in Hz */
-#undef  CFG_CLKS_IN_HZ
+#undef  CONFIG_SYS_CLKS_IN_HZ
 /* spec says 66.666 MHz, but it appears to be 33 */
-#define CFG_HZ				3333333
+#define CONFIG_SYS_HZ				3333333
 
 /* default load address */
-#define CFG_LOAD_ADDR			0x00010000
+#define CONFIG_SYS_LOAD_ADDR			0x00010000
 
 /* valid baudrates */
-#define CFG_BAUDRATE_TABLE		{ 9600, 19200, 38400, 57600, \
+#define CONFIG_SYS_BAUDRATE_TABLE		{ 9600, 19200, 38400, 57600, \
 					  115200, 230400 }
 #define CONFIG_SERIAL_RTS_ACTIVE	1
 
@@ -109,39 +109,39 @@
 #endif
 
 /* Expansion bus settings */
-#define CFG_EXP_CS0			0xbd113042
+#define CONFIG_SYS_EXP_CS0			0xbd113042
 
 /* SDRAM settings */
 #define CONFIG_NR_DRAM_BANKS		1
 #define PHYS_SDRAM_1			0x00000000
-#define CFG_DRAM_BASE			0x00000000
+#define CONFIG_SYS_DRAM_BASE			0x00000000
 
 /* 16MB SDRAM */
-#define CFG_SDR_CONFIG			0x3A
+#define CONFIG_SYS_SDR_CONFIG			0x3A
 #define PHYS_SDRAM_1_SIZE		0x01000000
-#define CFG_SDRAM_REFRESH_CNT		0x81a
-#define CFG_SDR_MODE_CONFIG		0x1
-#define CFG_DRAM_SIZE			0x01000000
+#define CONFIG_SYS_SDRAM_REFRESH_CNT		0x81a
+#define CONFIG_SYS_SDR_MODE_CONFIG		0x1
+#define CONFIG_SYS_DRAM_SIZE			0x01000000
 
 /* FLASH organization */
-#define CFG_MAX_FLASH_BANKS		1
+#define CONFIG_SYS_MAX_FLASH_BANKS		1
 /* max number of sectors on one chip */
-#define CFG_MAX_FLASH_SECT		140
+#define CONFIG_SYS_MAX_FLASH_SECT		140
 #define PHYS_FLASH_1			0x50000000
-#define CFG_FLASH_BANKS_LIST		{ PHYS_FLASH_1 }
+#define CONFIG_SYS_FLASH_BANKS_LIST		{ PHYS_FLASH_1 }
 
-#define CFG_FLASH_BASE			PHYS_FLASH_1
-#define CFG_MONITOR_BASE		PHYS_FLASH_1
-#define CFG_MONITOR_LEN			(256 << 10)
+#define CONFIG_SYS_FLASH_BASE			PHYS_FLASH_1
+#define CONFIG_SYS_MONITOR_BASE		PHYS_FLASH_1
+#define CONFIG_SYS_MONITOR_LEN			(256 << 10)
 
 /* Use common CFI driver */
-#define CFG_FLASH_CFI
+#define CONFIG_SYS_FLASH_CFI
 #define CONFIG_FLASH_CFI_DRIVER
 /* no byte writes on IXP4xx */
-#define CFG_FLASH_CFI_WIDTH		FLASH_CFI_16BIT
+#define CONFIG_SYS_FLASH_CFI_WIDTH		FLASH_CFI_16BIT
 
 /* print 'E' for empty sector on flinfo */
-#define CFG_FLASH_EMPTY_INFO
+#define CONFIG_SYS_FLASH_EMPTY_INFO
 
 /* Ethernet */
 
@@ -155,7 +155,7 @@
 /* MII PHY management */
 #define CONFIG_MII			1
 /* Number of ethernet rx buffers & descriptors */
-#define CFG_RX_ETH_BUFFER		16
+#define CONFIG_SYS_RX_ETH_BUFFER		16
 #define CONFIG_RESET_PHY_R		1
 /* ethernet switch connected to MII port */
 #define CONFIG_MII_ETHSWITCH		1
@@ -173,16 +173,16 @@
 #define CONFIG_BOOTP_HOSTNAME
 
 /* Cache Configuration */
-#define CFG_CACHELINE_SIZE		32
+#define CONFIG_SYS_CACHELINE_SIZE		32
 
 /*
  * environment organization:
  * one flash sector, embedded in uboot area (bottom bootblock flash)
  */
-#define	CFG_ENV_IS_IN_FLASH		1
-#define CFG_ENV_SIZE			0x2000
-#define CFG_ENV_ADDR			(PHYS_FLASH_1 + 0x4000)
-#define CFG_USE_PPCENV			1
+#define	CONFIG_ENV_IS_IN_FLASH		1
+#define CONFIG_ENV_SIZE			0x2000
+#define CONFIG_ENV_ADDR			(PHYS_FLASH_1 + 0x4000)
+#define CONFIG_SYS_USE_PPCENV			1
 
 #define CONFIG_EXTRA_ENV_SETTINGS					\
 	"mtd=IXP4XX-Flash.0:256k(uboot),64k(ucode),1152k(linux),-(root)\0" \
diff --git a/include/configs/actux3.h b/include/configs/actux3.h
index 693c2847f..3f42ed497 100644
--- a/include/configs/actux3.h
+++ b/include/configs/actux3.h
@@ -32,7 +32,7 @@
 #define CONFIG_DISPLAY_CPUINFO		1
 #define CONFIG_DISPLAY_BOARDINFO	1
 
-#define CFG_IXP425_CONSOLE		IXP425_UART2
+#define CONFIG_SYS_IXP425_CONSOLE		IXP425_UART2
 #define CONFIG_BAUDRATE			115200
 #define CONFIG_BOOTDELAY		3
 #define CONFIG_ZERO_BOOTDELAY_CHECK	/* check for keypress on bootdelay==0 */
@@ -43,9 +43,9 @@
 #undef CONFIG_USE_IRQ
 
 /* Size of malloc() pool */
-#define CFG_MALLOC_LEN			(CFG_ENV_SIZE + 128*1024)
+#define CONFIG_SYS_MALLOC_LEN			(CONFIG_ENV_SIZE + 128*1024)
 /* size in bytes reserved for initial data */
-#define CFG_GBL_DATA_SIZE		128
+#define CONFIG_SYS_GBL_DATA_SIZE		128
 
 /* allow to overwrite serial and ethaddr */
 #define CONFIG_ENV_OVERWRITE
@@ -69,30 +69,30 @@
 #endif
 
 /* Miscellaneous configurable options */
-#define CFG_LONGHELP
-#define CFG_PROMPT			"=> "
+#define CONFIG_SYS_LONGHELP
+#define CONFIG_SYS_PROMPT			"=> "
 /* Console I/O Buffer Size */
-#define CFG_CBSIZE			256
+#define CONFIG_SYS_CBSIZE			256
 /* Print Buffer Size */
-#define CFG_PBSIZE			(CFG_CBSIZE+sizeof(CFG_PROMPT)+16)
+#define CONFIG_SYS_PBSIZE			(CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
 /* max number of command args */
-#define CFG_MAXARGS			16
+#define CONFIG_SYS_MAXARGS			16
 /* Boot Argument Buffer Size */
-#define CFG_BARGSIZE			CFG_CBSIZE
+#define CONFIG_SYS_BARGSIZE			CONFIG_SYS_CBSIZE
 
-#define CFG_MEMTEST_START		0x00400000
-#define CFG_MEMTEST_END			0x00800000
+#define CONFIG_SYS_MEMTEST_START		0x00400000
+#define CONFIG_SYS_MEMTEST_END			0x00800000
 
 /* everything, incl board info, in Hz */
-#undef  CFG_CLKS_IN_HZ
+#undef  CONFIG_SYS_CLKS_IN_HZ
 /* spec says 66.666 MHz, but it appears to be 33 */
-#define CFG_HZ				3333333
+#define CONFIG_SYS_HZ				3333333
 
 /* default load address */
-#define CFG_LOAD_ADDR			0x00010000
+#define CONFIG_SYS_LOAD_ADDR			0x00010000
 
 /* valid baudrates */
-#define CFG_BAUDRATE_TABLE		{ 9600, 19200, 38400, 57600, \
+#define CONFIG_SYS_BAUDRATE_TABLE		{ 9600, 19200, 38400, 57600, \
 					  115200, 230400 }
 #define CONFIG_SERIAL_RTS_ACTIVE	1
 
@@ -108,39 +108,39 @@
 #endif
 
 /* Expansion bus settings */
-#define CFG_EXP_CS0			0xbd113442
+#define CONFIG_SYS_EXP_CS0			0xbd113442
 
 /* SDRAM settings */
 #define CONFIG_NR_DRAM_BANKS		1
 #define PHYS_SDRAM_1			0x00000000
-#define CFG_DRAM_BASE			0x00000000
+#define CONFIG_SYS_DRAM_BASE			0x00000000
 
 /* 16MB SDRAM */
-#define CFG_SDR_CONFIG			0x3A
+#define CONFIG_SYS_SDR_CONFIG			0x3A
 #define PHYS_SDRAM_1_SIZE		0x01000000
-#define CFG_SDRAM_REFRESH_CNT		0x81a
-#define CFG_SDR_MODE_CONFIG		0x1
-#define CFG_DRAM_SIZE			0x01000000
+#define CONFIG_SYS_SDRAM_REFRESH_CNT		0x81a
+#define CONFIG_SYS_SDR_MODE_CONFIG		0x1
+#define CONFIG_SYS_DRAM_SIZE			0x01000000
 
 /* FLASH organization */
-#define CFG_MAX_FLASH_BANKS		1
+#define CONFIG_SYS_MAX_FLASH_BANKS		1
 /* max number of sectors on one chip */
-#define CFG_MAX_FLASH_SECT		140
+#define CONFIG_SYS_MAX_FLASH_SECT		140
 #define PHYS_FLASH_1			0x50000000
-#define CFG_FLASH_BANKS_LIST		{ PHYS_FLASH_1 }
+#define CONFIG_SYS_FLASH_BANKS_LIST		{ PHYS_FLASH_1 }
 
-#define CFG_FLASH_BASE			PHYS_FLASH_1
-#define CFG_MONITOR_BASE		PHYS_FLASH_1
-#define CFG_MONITOR_LEN			(256 << 10)
+#define CONFIG_SYS_FLASH_BASE			PHYS_FLASH_1
+#define CONFIG_SYS_MONITOR_BASE		PHYS_FLASH_1
+#define CONFIG_SYS_MONITOR_LEN			(256 << 10)
 
 /* Use common CFI driver */
-#define CFG_FLASH_CFI
+#define CONFIG_SYS_FLASH_CFI
 #define CONFIG_FLASH_CFI_DRIVER
 /* no byte writes on IXP4xx */
-#define CFG_FLASH_CFI_WIDTH		FLASH_CFI_16BIT
+#define CONFIG_SYS_FLASH_CFI_WIDTH		FLASH_CFI_16BIT
 
 /* print 'E' for empty sector on flinfo */
-#define CFG_FLASH_EMPTY_INFO
+#define CONFIG_SYS_FLASH_EMPTY_INFO
 
 /* Ethernet */
 
@@ -155,7 +155,7 @@
 /* MII PHY management */
 #define CONFIG_MII			1
 /* Number of ethernet rx buffers & descriptors */
-#define CFG_RX_ETH_BUFFER		16
+#define CONFIG_SYS_RX_ETH_BUFFER		16
 #define CONFIG_RESET_PHY_R		1
 /* ethernet switch connected to MII port */
 #define CONFIG_MII_ETHSWITCH		1
@@ -173,16 +173,16 @@
 #define CONFIG_BOOTP_HOSTNAME
 
 /* Cache Configuration */
-#define CFG_CACHELINE_SIZE		32
+#define CONFIG_SYS_CACHELINE_SIZE		32
 
 /*
  * environment organization:
  * one flash sector, embedded in uboot area (bottom bootblock flash)
  */
-#define	CFG_ENV_IS_IN_FLASH		1
-#define CFG_ENV_SIZE			0x2000
-#define CFG_ENV_ADDR			(PHYS_FLASH_1 + 0x4000)
-#define CFG_USE_PPCENV			1
+#define	CONFIG_ENV_IS_IN_FLASH		1
+#define CONFIG_ENV_SIZE			0x2000
+#define CONFIG_ENV_ADDR			(PHYS_FLASH_1 + 0x4000)
+#define CONFIG_SYS_USE_PPCENV			1
 
 #define CONFIG_EXTRA_ENV_SETTINGS					\
 	"mtd=IXP4XX-Flash.0:256k(uboot),64k(ucode),1152k(linux),-(root)\0" \
diff --git a/include/configs/actux4.h b/include/configs/actux4.h
index 7f8e0f4d0..3cf1b2058 100644
--- a/include/configs/actux4.h
+++ b/include/configs/actux4.h
@@ -32,7 +32,7 @@
 #define CONFIG_DISPLAY_CPUINFO		1
 #define CONFIG_DISPLAY_BOARDINFO	1
 
-#define CFG_IXP425_CONSOLE		IXP425_UART1
+#define CONFIG_SYS_IXP425_CONSOLE		IXP425_UART1
 #define CONFIG_BAUDRATE			115200
 #define CONFIG_BOOTDELAY		3
 #define CONFIG_ZERO_BOOTDELAY_CHECK	/* check for keypress on bootdelay==0 */
@@ -43,9 +43,9 @@
 #undef CONFIG_USE_IRQ
 
 /* Size of malloc() pool */
-#define CFG_MALLOC_LEN			(CFG_ENV_SIZE + 128*1024)
+#define CONFIG_SYS_MALLOC_LEN			(CONFIG_ENV_SIZE + 128*1024)
 /* size in bytes reserved for initial data */
-#define CFG_GBL_DATA_SIZE		128
+#define CONFIG_SYS_GBL_DATA_SIZE		128
 
 /* allow to overwrite serial and ethaddr */
 #define CONFIG_ENV_OVERWRITE
@@ -68,30 +68,30 @@
 #endif
 
 /* Miscellaneous configurable options */
-#define CFG_LONGHELP
-#define CFG_PROMPT			"=> "
+#define CONFIG_SYS_LONGHELP
+#define CONFIG_SYS_PROMPT			"=> "
 /* Console I/O Buffer Size */
-#define CFG_CBSIZE			256
+#define CONFIG_SYS_CBSIZE			256
 /* Print Buffer Size */
-#define CFG_PBSIZE			(CFG_CBSIZE+sizeof(CFG_PROMPT)+16)
+#define CONFIG_SYS_PBSIZE			(CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
 /* max number of command args */
-#define CFG_MAXARGS			16
+#define CONFIG_SYS_MAXARGS			16
 /* Boot Argument Buffer Size */
-#define CFG_BARGSIZE			CFG_CBSIZE
+#define CONFIG_SYS_BARGSIZE			CONFIG_SYS_CBSIZE
 
-#define CFG_MEMTEST_START		0x00400000
-#define CFG_MEMTEST_END			0x00800000
+#define CONFIG_SYS_MEMTEST_START		0x00400000
+#define CONFIG_SYS_MEMTEST_END			0x00800000
 
 /* everything, incl board info, in Hz */
-#undef  CFG_CLKS_IN_HZ
+#undef  CONFIG_SYS_CLKS_IN_HZ
 /* spec says 66.666 MHz, but it appears to be 33 */
-#define CFG_HZ				3333333
+#define CONFIG_SYS_HZ				3333333
 
 /* default load address */
-#define CFG_LOAD_ADDR			0x00010000
+#define CONFIG_SYS_LOAD_ADDR			0x00010000
 
 /* valid baudrates */
-#define CFG_BAUDRATE_TABLE		{ 9600, 19200, 38400, 57600, \
+#define CONFIG_SYS_BAUDRATE_TABLE		{ 9600, 19200, 38400, 57600, \
 					  115200, 230400 }
 #define CONFIG_SERIAL_RTS_ACTIVE	1
 
@@ -106,44 +106,44 @@
 #endif
 
 /* Expansion bus settings */
-#define CFG_EXP_CS0			0xbd113003
+#define CONFIG_SYS_EXP_CS0			0xbd113003
 
 /* SDRAM settings */
 #define CONFIG_NR_DRAM_BANKS		1
 #define PHYS_SDRAM_1			0x00000000
-#define CFG_DRAM_BASE			0x00000000
+#define CONFIG_SYS_DRAM_BASE			0x00000000
 
 /* 32MB SDRAM */
-#define CFG_SDR_CONFIG			0x18
+#define CONFIG_SYS_SDR_CONFIG			0x18
 #define PHYS_SDRAM_1_SIZE		0x02000000
-#define CFG_SDRAM_REFRESH_CNT		0x81a
-#define CFG_SDR_MODE_CONFIG		0x1
-#define CFG_DRAM_SIZE			0x02000000
+#define CONFIG_SYS_SDRAM_REFRESH_CNT		0x81a
+#define CONFIG_SYS_SDR_MODE_CONFIG		0x1
+#define CONFIG_SYS_DRAM_SIZE			0x02000000
 
 /* FLASH organization */
-#define CFG_MAX_FLASH_BANKS		2
+#define CONFIG_SYS_MAX_FLASH_BANKS		2
 /* max # of sectors per chip */
-#define CFG_MAX_FLASH_SECT		70
+#define CONFIG_SYS_MAX_FLASH_SECT		70
 #define PHYS_FLASH_1			0x50000000
 #define PHYS_FLASH_2			0x51000000
-#define CFG_FLASH_BANKS_LIST		{ PHYS_FLASH_1, PHYS_FLASH_2 }
+#define CONFIG_SYS_FLASH_BANKS_LIST		{ PHYS_FLASH_1, PHYS_FLASH_2 }
 
-#define CFG_FLASH_BASE			PHYS_FLASH_1
-#define CFG_MONITOR_BASE		PHYS_FLASH_1
-#define CFG_MONITOR_LEN			(252 << 10)
+#define CONFIG_SYS_FLASH_BASE			PHYS_FLASH_1
+#define CONFIG_SYS_MONITOR_BASE		PHYS_FLASH_1
+#define CONFIG_SYS_MONITOR_LEN			(252 << 10)
 
 /* Use common CFI driver */
-#define CFG_FLASH_CFI
+#define CONFIG_SYS_FLASH_CFI
 #define CONFIG_FLASH_CFI_DRIVER
 /* board provides its own flash_init code */
 #define CONFIG_FLASH_CFI_LEGACY		1
 /* no byte writes on IXP4xx */
-#define CFG_FLASH_CFI_WIDTH		FLASH_CFI_16BIT
+#define CONFIG_SYS_FLASH_CFI_WIDTH		FLASH_CFI_16BIT
 /* SST 39VF020 etc. support */
-#define CFG_FLASH_LEGACY_256Kx8	1
+#define CONFIG_SYS_FLASH_LEGACY_256Kx8	1
 
 /* print 'E' for empty sector on flinfo */
-#define CFG_FLASH_EMPTY_INFO
+#define CONFIG_SYS_FLASH_EMPTY_INFO
 
 /* Ethernet */
 
@@ -158,7 +158,7 @@
 /* MII PHY management */
 #define CONFIG_MII			1
 /* Number of ethernet rx buffers & descriptors */
-#define CFG_RX_ETH_BUFFER		16
+#define CONFIG_SYS_RX_ETH_BUFFER		16
 
 #define CONFIG_CMD_DHCP
 #define CONFIG_CMD_NET
@@ -173,12 +173,12 @@
 #define CONFIG_BOOTP_HOSTNAME
 
 /* Cache Configuration */
-#define CFG_CACHELINE_SIZE		32
+#define CONFIG_SYS_CACHELINE_SIZE		32
 
 /* environment organization: one complete 4k flash sector */
-#define	CFG_ENV_IS_IN_FLASH		1
-#define CFG_ENV_SIZE			0x1000
-#define CFG_ENV_ADDR			(PHYS_FLASH_1 + 0x3f000)
+#define	CONFIG_ENV_IS_IN_FLASH		1
+#define CONFIG_ENV_SIZE			0x1000
+#define CONFIG_ENV_ADDR			(PHYS_FLASH_1 + 0x3f000)
 
 #define CONFIG_EXTRA_ENV_SETTINGS					\
 	"mtd=IXP4XX-Flash.0:252k(uboot),4k(uboot_env);"			\
diff --git a/include/configs/ads5121.h b/include/configs/ads5121.h
index f516c4602..bb3525f17 100644
--- a/include/configs/ads5121.h
+++ b/include/configs/ads5121.h
@@ -59,31 +59,31 @@
 /* CONFIG_PCI is defined at config time */
 
 #ifdef CONFIG_ADS5121_REV2
-#define CFG_MPC512X_CLKIN	66000000	/* in Hz */
+#define CONFIG_SYS_MPC512X_CLKIN	66000000	/* in Hz */
 #else
-#define CFG_MPC512X_CLKIN	33333333	/* in Hz */
+#define CONFIG_SYS_MPC512X_CLKIN	33333333	/* in Hz */
 #define CONFIG_PCI
 #endif
 
 #define CONFIG_BOARD_EARLY_INIT_F		/* call board_early_init_f() */
 #define CONFIG_MISC_INIT_R
 
-#define CFG_IMMR		0x80000000
-#define CFG_DIU_ADDR		(CFG_IMMR+0x2100)
+#define CONFIG_SYS_IMMR		0x80000000
+#define CONFIG_SYS_DIU_ADDR		(CONFIG_SYS_IMMR+0x2100)
 
-#define CFG_MEMTEST_START	0x00200000      /* memtest region */
-#define CFG_MEMTEST_END		0x00400000
+#define CONFIG_SYS_MEMTEST_START	0x00200000      /* memtest region */
+#define CONFIG_SYS_MEMTEST_END		0x00400000
 
 /*
  * DDR Setup - manually set all parameters as there's no SPD etc.
  */
 #ifdef CONFIG_ADS5121_REV2
-#define CFG_DDR_SIZE		256		/* MB */
+#define CONFIG_SYS_DDR_SIZE		256		/* MB */
 #else
-#define CFG_DDR_SIZE		512		/* MB */
+#define CONFIG_SYS_DDR_SIZE		512		/* MB */
 #endif
-#define CFG_DDR_BASE		0x00000000	/* DDR is system memory*/
-#define CFG_SDRAM_BASE		CFG_DDR_BASE
+#define CONFIG_SYS_DDR_BASE		0x00000000	/* DDR is system memory*/
+#define CONFIG_SYS_SDRAM_BASE		CONFIG_SYS_DDR_BASE
 
 /* DDR Controller Configuration
  *
@@ -130,102 +130,102 @@
  *	[04:00] DRAM tRPA
  */
 #ifdef CONFIG_ADS5121_REV2
-#define CFG_MDDRC_SYS_CFG	0xF8604A00
-#define CFG_MDDRC_SYS_CFG_RUN	0xE8604A00
-#define CFG_MDDRC_TIME_CFG1	0x54EC1168
-#define CFG_MDDRC_TIME_CFG2	0x35210864
+#define CONFIG_SYS_MDDRC_SYS_CFG	0xF8604A00
+#define CONFIG_SYS_MDDRC_SYS_CFG_RUN	0xE8604A00
+#define CONFIG_SYS_MDDRC_TIME_CFG1	0x54EC1168
+#define CONFIG_SYS_MDDRC_TIME_CFG2	0x35210864
 #else
-#define CFG_MDDRC_SYS_CFG	 0xFA804A00
-#define CFG_MDDRC_SYS_CFG_RUN	 0xEA804A00
-#define CFG_MDDRC_TIME_CFG1	 0x68EC1168
-#define CFG_MDDRC_TIME_CFG2	 0x34310864
+#define CONFIG_SYS_MDDRC_SYS_CFG	 0xFA804A00
+#define CONFIG_SYS_MDDRC_SYS_CFG_RUN	 0xEA804A00
+#define CONFIG_SYS_MDDRC_TIME_CFG1	 0x68EC1168
+#define CONFIG_SYS_MDDRC_TIME_CFG2	 0x34310864
 #endif
-#define CFG_MDDRC_SYS_CFG_EN	0xF0000000
-#define CFG_MDDRC_TIME_CFG0	0x00003D2E
-#define CFG_MDDRC_TIME_CFG0_RUN	0x06183D2E
-
-#define CFG_MICRON_NOP		0x01380000
-#define CFG_MICRON_PCHG_ALL	0x01100400
-#define CFG_MICRON_EM2		0x01020000
-#define CFG_MICRON_EM3		0x01030000
-#define CFG_MICRON_EN_DLL	0x01010000
-#define CFG_MICRON_RFSH		0x01080000
-#define CFG_MICRON_INIT_DEV_OP	0x01000432
-#define CFG_MICRON_OCD_DEFAULT	0x01010780
+#define CONFIG_SYS_MDDRC_SYS_CFG_EN	0xF0000000
+#define CONFIG_SYS_MDDRC_TIME_CFG0	0x00003D2E
+#define CONFIG_SYS_MDDRC_TIME_CFG0_RUN	0x06183D2E
+
+#define CONFIG_SYS_MICRON_NOP		0x01380000
+#define CONFIG_SYS_MICRON_PCHG_ALL	0x01100400
+#define CONFIG_SYS_MICRON_EM2		0x01020000
+#define CONFIG_SYS_MICRON_EM3		0x01030000
+#define CONFIG_SYS_MICRON_EN_DLL	0x01010000
+#define CONFIG_SYS_MICRON_RFSH		0x01080000
+#define CONFIG_SYS_MICRON_INIT_DEV_OP	0x01000432
+#define CONFIG_SYS_MICRON_OCD_DEFAULT	0x01010780
 
 /* DDR Priority Manager Configuration */
-#define CFG_MDDRCGRP_PM_CFG1	0x00077777
-#define CFG_MDDRCGRP_PM_CFG2	0x00000000
-#define CFG_MDDRCGRP_HIPRIO_CFG	0x00000001
-#define CFG_MDDRCGRP_LUT0_MU	0xFFEEDDCC
-#define CFG_MDDRCGRP_LUT0_ML	0xBBAAAAAA
-#define CFG_MDDRCGRP_LUT1_MU	0x66666666
-#define CFG_MDDRCGRP_LUT1_ML	0x55555555
-#define CFG_MDDRCGRP_LUT2_MU	0x44444444
-#define CFG_MDDRCGRP_LUT2_ML	0x44444444
-#define CFG_MDDRCGRP_LUT3_MU	0x55555555
-#define CFG_MDDRCGRP_LUT3_ML	0x55555558
-#define CFG_MDDRCGRP_LUT4_MU	0x11111111
-#define CFG_MDDRCGRP_LUT4_ML	0x11111122
-#define CFG_MDDRCGRP_LUT0_AU	0xaaaaaaaa
-#define CFG_MDDRCGRP_LUT0_AL	0xaaaaaaaa
-#define CFG_MDDRCGRP_LUT1_AU	0x66666666
-#define CFG_MDDRCGRP_LUT1_AL	0x66666666
-#define CFG_MDDRCGRP_LUT2_AU	0x11111111
-#define CFG_MDDRCGRP_LUT2_AL	0x11111111
-#define CFG_MDDRCGRP_LUT3_AU	0x11111111
-#define CFG_MDDRCGRP_LUT3_AL	0x11111111
-#define CFG_MDDRCGRP_LUT4_AU	0x11111111
-#define CFG_MDDRCGRP_LUT4_AL	0x11111111
+#define CONFIG_SYS_MDDRCGRP_PM_CFG1	0x00077777
+#define CONFIG_SYS_MDDRCGRP_PM_CFG2	0x00000000
+#define CONFIG_SYS_MDDRCGRP_HIPRIO_CFG	0x00000001
+#define CONFIG_SYS_MDDRCGRP_LUT0_MU	0xFFEEDDCC
+#define CONFIG_SYS_MDDRCGRP_LUT0_ML	0xBBAAAAAA
+#define CONFIG_SYS_MDDRCGRP_LUT1_MU	0x66666666
+#define CONFIG_SYS_MDDRCGRP_LUT1_ML	0x55555555
+#define CONFIG_SYS_MDDRCGRP_LUT2_MU	0x44444444
+#define CONFIG_SYS_MDDRCGRP_LUT2_ML	0x44444444
+#define CONFIG_SYS_MDDRCGRP_LUT3_MU	0x55555555
+#define CONFIG_SYS_MDDRCGRP_LUT3_ML	0x55555558
+#define CONFIG_SYS_MDDRCGRP_LUT4_MU	0x11111111
+#define CONFIG_SYS_MDDRCGRP_LUT4_ML	0x11111122
+#define CONFIG_SYS_MDDRCGRP_LUT0_AU	0xaaaaaaaa
+#define CONFIG_SYS_MDDRCGRP_LUT0_AL	0xaaaaaaaa
+#define CONFIG_SYS_MDDRCGRP_LUT1_AU	0x66666666
+#define CONFIG_SYS_MDDRCGRP_LUT1_AL	0x66666666
+#define CONFIG_SYS_MDDRCGRP_LUT2_AU	0x11111111
+#define CONFIG_SYS_MDDRCGRP_LUT2_AL	0x11111111
+#define CONFIG_SYS_MDDRCGRP_LUT3_AU	0x11111111
+#define CONFIG_SYS_MDDRCGRP_LUT3_AL	0x11111111
+#define CONFIG_SYS_MDDRCGRP_LUT4_AU	0x11111111
+#define CONFIG_SYS_MDDRCGRP_LUT4_AL	0x11111111
 
 /*
  * NOR FLASH on the Local Bus
  */
 #undef CONFIG_BKUP_FLASH
-#define CFG_FLASH_CFI				/* use the Common Flash Interface */
+#define CONFIG_SYS_FLASH_CFI				/* use the Common Flash Interface */
 #define CONFIG_FLASH_CFI_DRIVER			/* use the CFI driver */
 #ifdef CONFIG_BKUP_FLASH
-#define CFG_FLASH_BASE		0xFF800000	/* start of FLASH   */
-#define CFG_FLASH_SIZE		0x00800000	/* max flash size in bytes */
+#define CONFIG_SYS_FLASH_BASE		0xFF800000	/* start of FLASH   */
+#define CONFIG_SYS_FLASH_SIZE		0x00800000	/* max flash size in bytes */
 #else
-#define CFG_FLASH_BASE		0xFC000000	/* start of FLASH   */
-#define CFG_FLASH_SIZE		0x04000000	/* max flash size in bytes */
+#define CONFIG_SYS_FLASH_BASE		0xFC000000	/* start of FLASH   */
+#define CONFIG_SYS_FLASH_SIZE		0x04000000	/* max flash size in bytes */
 #endif
-#define CFG_FLASH_USE_BUFFER_WRITE
-#define CFG_MAX_FLASH_BANKS	1		/* number of banks */
-#define CFG_FLASH_BANKS_LIST	{CFG_FLASH_BASE}
-#define CFG_MAX_FLASH_SECT	256		/* max sectors per device */
+#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
+#define CONFIG_SYS_MAX_FLASH_BANKS	1		/* number of banks */
+#define CONFIG_SYS_FLASH_BANKS_LIST	{CONFIG_SYS_FLASH_BASE}
+#define CONFIG_SYS_MAX_FLASH_SECT	256		/* max sectors per device */
 
-#undef CFG_FLASH_CHECKSUM
+#undef CONFIG_SYS_FLASH_CHECKSUM
 
 /*
  * CPLD registers area is really only 32 bytes in size, but the smallest possible LP
  * window is 64KB
  */
-#define CFG_CPLD_BASE		0x82000000
-#define CFG_CPLD_SIZE		0x00010000	/* 64 KB */
+#define CONFIG_SYS_CPLD_BASE		0x82000000
+#define CONFIG_SYS_CPLD_SIZE		0x00010000	/* 64 KB */
 
-#define CFG_SRAM_BASE		0x30000000
-#define CFG_SRAM_SIZE		0x00020000	/* 128 KB */
+#define CONFIG_SYS_SRAM_BASE		0x30000000
+#define CONFIG_SYS_SRAM_SIZE		0x00020000	/* 128 KB */
 
-#define CFG_CS0_CFG		0x05059310	/* ALE active low, data size 4bytes */
-#define CFG_CS2_CFG		0x05059010	/* ALE active low, data size 1byte */
-#define CFG_CS_ALETIMING	0x00000005	/* Use alternative CS timing for CS0 and CS2 */
+#define CONFIG_SYS_CS0_CFG		0x05059310	/* ALE active low, data size 4bytes */
+#define CONFIG_SYS_CS2_CFG		0x05059010	/* ALE active low, data size 1byte */
+#define CONFIG_SYS_CS_ALETIMING	0x00000005	/* Use alternative CS timing for CS0 and CS2 */
 
 /* Use SRAM for initial stack */
-#define CFG_INIT_RAM_ADDR	CFG_SRAM_BASE		/* Initial RAM address */
-#define CFG_INIT_RAM_END	CFG_SRAM_SIZE		/* End of used area in RAM */
+#define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_SRAM_BASE		/* Initial RAM address */
+#define CONFIG_SYS_INIT_RAM_END	CONFIG_SYS_SRAM_SIZE		/* End of used area in RAM */
 
-#define CFG_GBL_DATA_SIZE	0x100			/* num bytes initial data */
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_GBL_DATA_SIZE	0x100			/* num bytes initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
-#define CFG_MONITOR_BASE	TEXT_BASE		/* Start of monitor */
-#define CFG_MONITOR_LEN		(256 * 1024)		/* Reserve 256 kB for Mon */
+#define CONFIG_SYS_MONITOR_BASE	TEXT_BASE		/* Start of monitor */
+#define CONFIG_SYS_MONITOR_LEN		(256 * 1024)		/* Reserve 256 kB for Mon */
 #ifdef	CONFIG_FSL_DIU_FB
-#define CFG_MALLOC_LEN		(6 * 1024 * 1024)	/* Reserved for malloc */
+#define CONFIG_SYS_MALLOC_LEN		(6 * 1024 * 1024)	/* Reserved for malloc */
 #else
-#define CFG_MALLOC_LEN		(512 * 1024)
+#define CONFIG_SYS_MALLOC_LEN		(512 * 1024)
 #endif
 
 /*
@@ -242,7 +242,7 @@
 #error CONFIG_PSC_CONSOLE must be 3
 #endif
 #define CONFIG_BAUDRATE		115200	/* ... at 115200 bps */
-#define CFG_BAUDRATE_TABLE  \
+#define CONFIG_SYS_BAUDRATE_TABLE  \
 	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200}
 
 #define CONSOLE_FIFO_TX_SIZE	FIFOC_PSC3_TX_SIZE
@@ -252,9 +252,9 @@
 
 #define CONFIG_CMDLINE_EDITING	1	/* add command line history	*/
 /* Use the HUSH parser */
-#define CFG_HUSH_PARSER
-#ifdef  CFG_HUSH_PARSER
-#define CFG_PROMPT_HUSH_PS2 "> "
+#define CONFIG_SYS_HUSH_PARSER
+#ifdef  CONFIG_SYS_HUSH_PARSER
+#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
 #endif
 
 /*
@@ -265,15 +265,15 @@
 /*
  * General PCI
  */
-#define CFG_PCI_MEM_BASE	0xA0000000
-#define CFG_PCI_MEM_PHYS	CFG_PCI_MEM_BASE
-#define CFG_PCI_MEM_SIZE	0x10000000	/* 256M */
-#define CFG_PCI_MMIO_BASE	(CFG_PCI_MEM_BASE + CFG_PCI_MEM_SIZE)
-#define CFG_PCI_MMIO_PHYS	CFG_PCI_MMIO_BASE
-#define CFG_PCI_MMIO_SIZE	0x10000000	/* 256M */
-#define CFG_PCI_IO_BASE		0x00000000
-#define CFG_PCI_IO_PHYS		0x84000000
-#define CFG_PCI_IO_SIZE		0x01000000	/* 16M */
+#define CONFIG_SYS_PCI_MEM_BASE	0xA0000000
+#define CONFIG_SYS_PCI_MEM_PHYS	CONFIG_SYS_PCI_MEM_BASE
+#define CONFIG_SYS_PCI_MEM_SIZE	0x10000000	/* 256M */
+#define CONFIG_SYS_PCI_MMIO_BASE	(CONFIG_SYS_PCI_MEM_BASE + CONFIG_SYS_PCI_MEM_SIZE)
+#define CONFIG_SYS_PCI_MMIO_PHYS	CONFIG_SYS_PCI_MMIO_BASE
+#define CONFIG_SYS_PCI_MMIO_SIZE	0x10000000	/* 256M */
+#define CONFIG_SYS_PCI_IO_BASE		0x00000000
+#define CONFIG_SYS_PCI_IO_PHYS		0x84000000
+#define CONFIG_SYS_PCI_IO_SIZE		0x01000000	/* 16M */
 
 
 #define CONFIG_PCI_PNP			/* do pci plug-and-play */
@@ -287,19 +287,19 @@
 #undef CONFIG_SOFT_I2C			/* so disable bit-banged I2C */
 #define CONFIG_I2C_MULTI_BUS
 #define CONFIG_I2C_CMD_TREE
-#define CFG_I2C_SPEED		100000	/* I2C speed and slave address */
-#define CFG_I2C_SLAVE		0x7F
+#define CONFIG_SYS_I2C_SPEED		100000	/* I2C speed and slave address */
+#define CONFIG_SYS_I2C_SLAVE		0x7F
 #if 0
-#define CFG_I2C_NOPROBES	{{0,0x69}}	/* Don't probe these addrs */
+#define CONFIG_SYS_I2C_NOPROBES	{{0,0x69}}	/* Don't probe these addrs */
 #endif
 
 /*
  * EEPROM configuration
  */
-#define CFG_I2C_EEPROM_ADDR_LEN		2	/* 16-bit EEPROM address */
-#define CFG_I2C_EEPROM_ADDR		0x50	/* Atmel: AT24C32A-10TQ-2.7 */
-#define CFG_EEPROM_PAGE_WRITE_DELAY_MS	10	/* 10ms of delay */
-#define CFG_EEPROM_PAGE_WRITE_BITS	5	/* 32-Byte Page Write Mode */
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN		2	/* 16-bit EEPROM address */
+#define CONFIG_SYS_I2C_EEPROM_ADDR		0x50	/* Atmel: AT24C32A-10TQ-2.7 */
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	10	/* 10ms of delay */
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS	5	/* 32-Byte Page Write Mode */
 
 /*
  * Ethernet configuration
@@ -315,27 +315,27 @@
  * Configure on-board RTC
  */
 #define CONFIG_RTC_M41T62			/* use M41T62 rtc via i2 */
-#define CFG_I2C_RTC_ADDR		0x68	/* at address 0x68		*/
+#define CONFIG_SYS_I2C_RTC_ADDR		0x68	/* at address 0x68		*/
 
 /*
  * Environment
  */
-#define CFG_ENV_IS_IN_FLASH	1
+#define CONFIG_ENV_IS_IN_FLASH	1
 /* This has to be a multiple of the Flash sector size */
-#define CFG_ENV_ADDR		(CFG_MONITOR_BASE + CFG_MONITOR_LEN)
-#define CFG_ENV_SIZE		0x2000
+#define CONFIG_ENV_ADDR		(CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)
+#define CONFIG_ENV_SIZE		0x2000
 #ifdef CONFIG_BKUP_FLASH
-#define CFG_ENV_SECT_SIZE	0x20000	/* one sector (256K) for env */
+#define CONFIG_ENV_SECT_SIZE	0x20000	/* one sector (256K) for env */
 #else
-#define CFG_ENV_SECT_SIZE	0x40000	/* one sector (256K) for env */
+#define CONFIG_ENV_SECT_SIZE	0x40000	/* one sector (256K) for env */
 #endif
 
 /* Address and size of Redundant Environment Sector	*/
-#define CFG_ENV_ADDR_REDUND	(CFG_ENV_ADDR + CFG_ENV_SECT_SIZE)
-#define CFG_ENV_SIZE_REDUND	(CFG_ENV_SIZE)
+#define CONFIG_ENV_ADDR_REDUND	(CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE)
+#define CONFIG_ENV_SIZE_REDUND	(CONFIG_ENV_SIZE)
 
 #define CONFIG_LOADS_ECHO	1	/* echo on for serial download */
-#define CFG_LOADS_BAUD_CHANGE	1	/* allow baudrate change */
+#define CONFIG_SYS_LOADS_BAUD_CHANGE	1	/* allow baudrate change */
 
 #include <config_cmd_default.h>
 
@@ -354,50 +354,50 @@
 #endif
 
 /*
- * Watchdog timeout = CFG_WATCHDOG_VALUE * 65536 / IPS clock.
- * For example, when IPS is set to 66MHz and CFG_WATCHDOG_VALUE is set
+ * Watchdog timeout = CONFIG_SYS_WATCHDOG_VALUE * 65536 / IPS clock.
+ * For example, when IPS is set to 66MHz and CONFIG_SYS_WATCHDOG_VALUE is set
  * to 0xFFFF, watchdog timeouts after about 64s. For details refer
  * to chapter 36 of the MPC5121e Reference Manual.
  */
 /* #define CONFIG_WATCHDOG */		/* enable watchdog */
-#define CFG_WATCHDOG_VALUE 0xFFFF
+#define CONFIG_SYS_WATCHDOG_VALUE 0xFFFF
 
  /*
  * Miscellaneous configurable options
  */
-#define CFG_LONGHELP			/* undef to save memory */
-#define CFG_LOAD_ADDR	0x2000000	/* default load address */
-#define CFG_PROMPT	"=> "		/* Monitor Command Prompt */
+#define CONFIG_SYS_LONGHELP			/* undef to save memory */
+#define CONFIG_SYS_LOAD_ADDR	0x2000000	/* default load address */
+#define CONFIG_SYS_PROMPT	"=> "		/* Monitor Command Prompt */
 
 #ifdef CONFIG_CMD_KGDB
-	#define CFG_CBSIZE	1024	/* Console I/O Buffer Size */
+	#define CONFIG_SYS_CBSIZE	1024	/* Console I/O Buffer Size */
 #else
-	#define CFG_CBSIZE	256	/* Console I/O Buffer Size */
+	#define CONFIG_SYS_CBSIZE	256	/* Console I/O Buffer Size */
 #endif
 
 
-#define CFG_PBSIZE (CFG_CBSIZE + sizeof(CFG_PROMPT) + 16) /* Print Buffer Size */
-#define CFG_MAXARGS	16		/* max number of command args */
-#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size */
-#define CFG_HZ		1000		/* decrementer freq: 1ms ticks */
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) /* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS	16		/* max number of command args */
+#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size */
+#define CONFIG_SYS_HZ		1000		/* decrementer freq: 1ms ticks */
 
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define CFG_BOOTMAPSZ	(8 << 20)	/* Initial Memory map for Linux*/
+#define CONFIG_SYS_BOOTMAPSZ	(8 << 20)	/* Initial Memory map for Linux*/
 
 /* Cache Configuration */
-#define CFG_DCACHE_SIZE		32768
-#define CFG_CACHELINE_SIZE	32
+#define CONFIG_SYS_DCACHE_SIZE		32768
+#define CONFIG_SYS_CACHELINE_SIZE	32
 #ifdef CONFIG_CMD_KGDB
-#define CFG_CACHELINE_SHIFT	5	/*log base 2 of the above value*/
+#define CONFIG_SYS_CACHELINE_SHIFT	5	/*log base 2 of the above value*/
 #endif
 
-#define CFG_HID0_INIT	0x000000000
-#define CFG_HID0_FINAL	HID0_ENABLE_MACHINE_CHECK
-#define CFG_HID2	HID2_HBE
+#define CONFIG_SYS_HID0_INIT	0x000000000
+#define CONFIG_SYS_HID0_FINAL	HID0_ENABLE_MACHINE_CHECK
+#define CONFIG_SYS_HID2	HID2_HBE
 
 #define CONFIG_HIGH_BATS	1	/* High BATs supported */
 
@@ -421,7 +421,7 @@
 
 #define CONFIG_HOSTNAME		ads5121
 #define CONFIG_BOOTFILE		ads5121/uImage
-#define CONFIG_ROOTPATH		/opt/eldk/pcc_6xx
+#define CONFIG_ROOTPATH		/opt/eldk/ppc_6xx
 
 #define CONFIG_LOADADDR		400000	/* default location for tftp and bootm */
 
diff --git a/include/configs/aev.h b/include/configs/aev.h
index f27cc4a15..2b4826d90 100644
--- a/include/configs/aev.h
+++ b/include/configs/aev.h
@@ -39,7 +39,7 @@
 #define CONFIG_STK52XX		1	/* ... on a STK52XX base board */
 #define CONFIG_STK52XX_REV100	1	/*  define for revision 100 baseboards */
 #define CONFIG_AEVFIFO		1
-#define CFG_MPC5XXX_CLKIN	33000000 /* ... running at 33.000000MHz */
+#define CONFIG_SYS_MPC5XXX_CLKIN	33000000 /* ... running at 33.000000MHz */
 
 #define CONFIG_HIGH_BATS	1	/* High BATs supported */
 
@@ -51,7 +51,7 @@
  */
 #define CONFIG_PSC_CONSOLE	1	/* console is on PSC1 */
 #define CONFIG_BAUDRATE		115200	/* ... at 115200 bps */
-#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
 
 /*
  * PCI Mapping:
@@ -74,7 +74,7 @@
 
 #define CONFIG_NET_MULTI	1
 #define CONFIG_EEPRO100		1
-#define CFG_RX_ETH_BUFFER	8  /* use 8 rx buffer on eepro100  */
+#define CONFIG_SYS_RX_ETH_BUFFER	8  /* use 8 rx buffer on eepro100  */
 #define CONFIG_NS8382X		1
 #endif	/* CONFIG_AEVFIFO */
 
@@ -84,9 +84,9 @@
 #define CONFIG_ISO_PARTITION
 
 /* POST support */
-#define CONFIG_POST		(CFG_POST_MEMORY   | \
-				 CFG_POST_CPU	   | \
-				 CFG_POST_I2C)
+#define CONFIG_POST		(CONFIG_SYS_POST_MEMORY   | \
+				 CONFIG_SYS_POST_CPU	   | \
+				 CONFIG_SYS_POST_I2C)
 
 #ifdef CONFIG_POST
 /* preserve space for the post_word at end of on-chip SRAM */
@@ -129,7 +129,7 @@
 #define	CONFIG_TIMESTAMP		/* display image timestamps */
 
 #if (TEXT_BASE == 0xFC000000)		/* Boot low */
-#   define CFG_LOWBOOT		1
+#   define CONFIG_SYS_LOWBOOT		1
 #endif
 
 /*
@@ -172,17 +172,17 @@
 /*
  * IPB Bus clocking configuration.
  */
-#define CFG_IPBCLK_EQUALS_XLBCLK		/* define for 133MHz speed */
+#define CONFIG_SYS_IPBCLK_EQUALS_XLBCLK		/* define for 133MHz speed */
 
-#if defined(CFG_IPBCLK_EQUALS_XLBCLK)
+#if defined(CONFIG_SYS_IPBCLK_EQUALS_XLBCLK)
 /*
  * PCI Bus clocking configuration
  *
  * Actually a PCI Clock of 66 MHz is only set (in cpu_init.c) if
- * CFG_IPBCLK_EQUALS_XLBCLK is defined. This is because a PCI Clock
+ * CONFIG_SYS_IPBCLK_EQUALS_XLBCLK is defined. This is because a PCI Clock
  * of 66 MHz yet hasn't been tested with a IPB Bus Clock of 66 MHz.
  */
-#define CFG_PCICLK_EQUALS_IPBCLK_DIV2	/* define for 66MHz speed */
+#define CONFIG_SYS_PCICLK_EQUALS_IPBCLK_DIV2	/* define for 66MHz speed */
 #endif
 
 /*
@@ -190,9 +190,9 @@
  */
 #define CONFIG_HARD_I2C		1	/* I2C with hardware support */
 #ifdef CONFIG_TQM5200_REV100
-#define CFG_I2C_MODULE		1	/* Select I2C module #1 for rev. 100 board */
+#define CONFIG_SYS_I2C_MODULE		1	/* Select I2C module #1 for rev. 100 board */
 #else
-#define CFG_I2C_MODULE		2	/* Select I2C module #2 for all other revs */
+#define CONFIG_SYS_I2C_MODULE		2	/* Select I2C module #2 for all other revs */
 #endif
 
 /*
@@ -201,11 +201,11 @@
  * Please notice, that the resulting clock frequency could differ from the
  * configured value. This is because the I2C clock is derived from system
  * clock over a frequency divider with only a few divider values. U-boot
- * calculates the best approximation for CFG_I2C_SPEED. However the calculated
+ * calculates the best approximation for CONFIG_SYS_I2C_SPEED. However the calculated
  * approximation allways lies below the configured value, never above.
  */
-#define CFG_I2C_SPEED		100000 /* 100 kHz */
-#define CFG_I2C_SLAVE		0x7F
+#define CONFIG_SYS_I2C_SPEED		100000 /* 100 kHz */
+#define CONFIG_SYS_I2C_SLAVE		0x7F
 
 /*
  * EEPROM configuration for onboard EEPROM M24C32 (M24C64 should work
@@ -213,74 +213,74 @@
  * EEPROM (24C64) is on the same I2C address (but on other I2C bus), so the
  * same configuration could be used.
  */
-#define CFG_I2C_EEPROM_ADDR		0x50	/* 1010000x */
-#define CFG_I2C_EEPROM_ADDR_LEN		2
-#define CFG_EEPROM_PAGE_WRITE_BITS	5	/* =32 Bytes per write */
-#define CFG_EEPROM_PAGE_WRITE_DELAY_MS	20
+#define CONFIG_SYS_I2C_EEPROM_ADDR		0x50	/* 1010000x */
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN		2
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS	5	/* =32 Bytes per write */
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	20
 
 /*
  * Flash configuration
  */
-#define CFG_FLASH_BASE		TEXT_BASE /* 0xFC000000 */
+#define CONFIG_SYS_FLASH_BASE		TEXT_BASE /* 0xFC000000 */
 
 /* use CFI flash driver if no module variant is spezified */
-#define CFG_FLASH_CFI		1	/* Flash is CFI conformant */
+#define CONFIG_SYS_FLASH_CFI		1	/* Flash is CFI conformant */
 #define CONFIG_FLASH_CFI_DRIVER	1	/* Use the common driver */
-#define CFG_FLASH_BANKS_LIST	{ CFG_BOOTCS_START }
-#define CFG_FLASH_EMPTY_INFO
-#define CFG_FLASH_SIZE		0x04000000 /* 64 MByte */
-#define CFG_MAX_FLASH_SECT	512	/* max num of sects on one chip */
-#undef CFG_FLASH_USE_BUFFER_WRITE	/* not supported yet for AMD */
-
-#if !defined(CFG_LOWBOOT)
-#define CFG_ENV_ADDR		(CFG_FLASH_BASE + 0x00760000 + 0x00800000)
-#else	/* CFG_LOWBOOT */
-#define CFG_ENV_ADDR		(CFG_FLASH_BASE + 0x00060000)
-#endif	/* CFG_LOWBOOT */
-#define CFG_MAX_FLASH_BANKS	1	/* max num of flash banks
+#define CONFIG_SYS_FLASH_BANKS_LIST	{ CONFIG_SYS_BOOTCS_START }
+#define CONFIG_SYS_FLASH_EMPTY_INFO
+#define CONFIG_SYS_FLASH_SIZE		0x04000000 /* 64 MByte */
+#define CONFIG_SYS_MAX_FLASH_SECT	512	/* max num of sects on one chip */
+#undef CONFIG_SYS_FLASH_USE_BUFFER_WRITE	/* not supported yet for AMD */
+
+#if !defined(CONFIG_SYS_LOWBOOT)
+#define CONFIG_ENV_ADDR		(CONFIG_SYS_FLASH_BASE + 0x00760000 + 0x00800000)
+#else	/* CONFIG_SYS_LOWBOOT */
+#define CONFIG_ENV_ADDR		(CONFIG_SYS_FLASH_BASE + 0x00060000)
+#endif	/* CONFIG_SYS_LOWBOOT */
+#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max num of flash banks
 					   (= chip selects) */
-#define CFG_FLASH_ERASE_TOUT	240000	/* Flash Erase Timeout (in ms)	*/
-#define CFG_FLASH_WRITE_TOUT	500	/* Flash Write Timeout (in ms)	*/
+#define CONFIG_SYS_FLASH_ERASE_TOUT	240000	/* Flash Erase Timeout (in ms)	*/
+#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Flash Write Timeout (in ms)	*/
 
 
 /*
  * Environment settings
  */
-#define CFG_ENV_IS_IN_FLASH	1
-#define CFG_ENV_SIZE		0x10000
-#define CFG_ENV_SECT_SIZE	0x20000
-#define CFG_ENV_ADDR_REDUND	(CFG_ENV_ADDR + CFG_ENV_SECT_SIZE)
-#define	CFG_ENV_SIZE_REDUND	(CFG_ENV_SIZE)
+#define CONFIG_ENV_IS_IN_FLASH	1
+#define CONFIG_ENV_SIZE		0x10000
+#define CONFIG_ENV_SECT_SIZE	0x20000
+#define CONFIG_ENV_ADDR_REDUND	(CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE)
+#define	CONFIG_ENV_SIZE_REDUND	(CONFIG_ENV_SIZE)
 
 /*
  * Memory map
  */
-#define CFG_MBAR		0xF0000000
-#define CFG_SDRAM_BASE		0x00000000
-#define CFG_DEFAULT_MBAR	0x80000000
+#define CONFIG_SYS_MBAR		0xF0000000
+#define CONFIG_SYS_SDRAM_BASE		0x00000000
+#define CONFIG_SYS_DEFAULT_MBAR	0x80000000
 
 /* Use ON-Chip SRAM until RAM will be available */
-#define CFG_INIT_RAM_ADDR	MPC5XXX_SRAM
+#define CONFIG_SYS_INIT_RAM_ADDR	MPC5XXX_SRAM
 #ifdef CONFIG_POST
 /* preserve space for the post_word at end of on-chip SRAM */
-#define CFG_INIT_RAM_END	MPC5XXX_SRAM_POST_SIZE
+#define CONFIG_SYS_INIT_RAM_END	MPC5XXX_SRAM_POST_SIZE
 #else
-#define CFG_INIT_RAM_END	MPC5XXX_SRAM_SIZE
+#define CONFIG_SYS_INIT_RAM_END	MPC5XXX_SRAM_SIZE
 #endif
 
 
-#define CFG_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
-#define CFG_MONITOR_BASE	TEXT_BASE
-#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
-#   define CFG_RAMBOOT		1
+#define CONFIG_SYS_MONITOR_BASE	TEXT_BASE
+#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
+#   define CONFIG_SYS_RAMBOOT		1
 #endif
 
-#define CFG_MONITOR_LEN		(384 << 10)	/* Reserve 384 kB for Monitor	*/
-#define CFG_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/
-#define CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
+#define CONFIG_SYS_MONITOR_LEN		(384 << 10)	/* Reserve 384 kB for Monitor	*/
+#define CONFIG_SYS_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/
+#define CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
 
 /*
  * Ethernet configuration
@@ -318,7 +318,7 @@
  *   GPIO on PSC6_3 is used in post_hotkeys_pressed() to enable extended POST
  *   tests.
  */
-#define CFG_GPS_PORT_CONFIG	0x81500014
+#define CONFIG_SYS_GPS_PORT_CONFIG	0x81500014
 
 /*
  * RTC configuration
@@ -328,30 +328,30 @@
 /*
  * Miscellaneous configurable options
  */
-#define CFG_LONGHELP			/* undef to save memory	    */
-#define CFG_PROMPT		"=> "	/* Monitor Command Prompt   */
+#define CONFIG_SYS_LONGHELP			/* undef to save memory	    */
+#define CONFIG_SYS_PROMPT		"=> "	/* Monitor Command Prompt   */
 #if defined(CONFIG_CMD_KGDB)
-#define CFG_CBSIZE		1024	/* Console I/O Buffer Size  */
+#define CONFIG_SYS_CBSIZE		1024	/* Console I/O Buffer Size  */
 #else
-#define CFG_CBSIZE		256	/* Console I/O Buffer Size  */
+#define CONFIG_SYS_CBSIZE		256	/* Console I/O Buffer Size  */
 #endif
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define CFG_MAXARGS		16	/* max number of command args	*/
-#define CFG_BARGSIZE		CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS		16	/* max number of command args	*/
+#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
 
 /* Enable an alternate, more extensive memory test */
-#define CFG_ALT_MEMTEST
+#define CONFIG_SYS_ALT_MEMTEST
 
-#define CFG_MEMTEST_START	0x00100000	/* memtest works on */
-#define CFG_MEMTEST_END		0x00f00000	/* 1 ... 15 MB in DRAM	*/
+#define CONFIG_SYS_MEMTEST_START	0x00100000	/* memtest works on */
+#define CONFIG_SYS_MEMTEST_END		0x00f00000	/* 1 ... 15 MB in DRAM	*/
 
-#define CFG_LOAD_ADDR		0x100000	/* default load address */
+#define CONFIG_SYS_LOAD_ADDR		0x100000	/* default load address */
 
-#define CFG_HZ			1000	/* decrementer freq: 1 ms ticks */
+#define CONFIG_SYS_HZ			1000	/* decrementer freq: 1 ms ticks */
 
-#define CFG_CACHELINE_SIZE	32	/* For MPC5xxx CPUs */
+#define CONFIG_SYS_CACHELINE_SIZE	32	/* For MPC5xxx CPUs */
 #if defined(CONFIG_CMD_KGDB)
-#  define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value */
+#  define CONFIG_SYS_CACHELINE_SHIFT	5	/* log base 2 of the above value */
 #endif
 
 /*
@@ -363,22 +363,22 @@
  * Various low-level settings
  */
 #if defined(CONFIG_MPC5200)
-#define CFG_HID0_INIT		HID0_ICE | HID0_ICFI
-#define CFG_HID0_FINAL		HID0_ICE
+#define CONFIG_SYS_HID0_INIT		HID0_ICE | HID0_ICFI
+#define CONFIG_SYS_HID0_FINAL		HID0_ICE
 #else
-#define CFG_HID0_INIT		0
-#define CFG_HID0_FINAL		0
+#define CONFIG_SYS_HID0_INIT		0
+#define CONFIG_SYS_HID0_FINAL		0
 #endif
 
-#define CFG_BOOTCS_START	CFG_FLASH_BASE
-#define CFG_BOOTCS_SIZE		CFG_FLASH_SIZE
-#ifdef CFG_PCICLK_EQUALS_IPBCLK_DIV2
-#define CFG_BOOTCS_CFG		0x0008DF30 /* for pci_clk  = 66 MHz */
+#define CONFIG_SYS_BOOTCS_START	CONFIG_SYS_FLASH_BASE
+#define CONFIG_SYS_BOOTCS_SIZE		CONFIG_SYS_FLASH_SIZE
+#ifdef CONFIG_SYS_PCICLK_EQUALS_IPBCLK_DIV2
+#define CONFIG_SYS_BOOTCS_CFG		0x0008DF30 /* for pci_clk  = 66 MHz */
 #else
-#define CFG_BOOTCS_CFG		0x0004DF30 /* for pci_clk = 33 MHz */
+#define CONFIG_SYS_BOOTCS_CFG		0x0004DF30 /* for pci_clk = 33 MHz */
 #endif
-#define CFG_CS0_START		CFG_FLASH_BASE
-#define CFG_CS0_SIZE		CFG_FLASH_SIZE
+#define CONFIG_SYS_CS0_START		CONFIG_SYS_FLASH_BASE
+#define CONFIG_SYS_CS0_SIZE		CONFIG_SYS_FLASH_SIZE
 
 #define CONFIG_LAST_STAGE_INIT
 
@@ -386,23 +386,23 @@
  * SRAM - Do not map below 2 GB in address space, because this area is used
  * for SDRAM autosizing.
  */
-#define CFG_CS2_START		0xE5000000
-#define CFG_CS2_SIZE		0x80000		/* 512 kByte */
-#define CFG_CS2_CFG		0x0004D930
+#define CONFIG_SYS_CS2_START		0xE5000000
+#define CONFIG_SYS_CS2_SIZE		0x80000		/* 512 kByte */
+#define CONFIG_SYS_CS2_CFG		0x0004D930
 
 /*
  * Grafic controller - Do not map below 2 GB in address space, because this
  * area is used for SDRAM autosizing.
  */
 #define SM501_FB_BASE           0xE0000000
-#define CFG_CS1_START           (SM501_FB_BASE)
-#define CFG_CS1_SIZE            0x4000000       /* 64 MByte */
-#define CFG_CS1_CFG             0x8F48FF70
-#define SM501_MMIO_BASE         CFG_CS1_START + 0x03E00000
+#define CONFIG_SYS_CS1_START           (SM501_FB_BASE)
+#define CONFIG_SYS_CS1_SIZE            0x4000000       /* 64 MByte */
+#define CONFIG_SYS_CS1_CFG             0x8F48FF70
+#define SM501_MMIO_BASE         CONFIG_SYS_CS1_START + 0x03E00000
 
-#define CFG_CS_BURST            0x00000000
-#define CFG_CS_DEADCYCLE        0x33333311      /* 1 dead cycle for flash and SM501 */
+#define CONFIG_SYS_CS_BURST            0x00000000
+#define CONFIG_SYS_CS_DEADCYCLE        0x33333311      /* 1 dead cycle for flash and SM501 */
 
-#define CFG_RESET_ADDRESS	0xff000000
+#define CONFIG_SYS_RESET_ADDRESS	0xff000000
 
 #endif /* __CONFIG_H */
diff --git a/include/configs/afeb9260.h b/include/configs/afeb9260.h
new file mode 100644
index 000000000..d63a1a07f
--- /dev/null
+++ b/include/configs/afeb9260.h
@@ -0,0 +1,169 @@
+/*
+ * (C) Copyright 2008 Sergey Lapin <slapin@ossfans.org>
+ *
+ * Configuation settings for the AFEB9260 board.
+ * Based on configuration for AT91SAM9260-EK
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/* ARM asynchronous clock */
+#define AT91_MAIN_CLOCK		18429952	/* from 18.432 MHz crystal */
+#define AT91_MASTER_CLOCK	89999598	/* peripheral = main / 2 */
+#define CONFIG_SYS_AT91_PLLB	0x107c3e18	/* PLLB settings for USB */
+#define CONFIG_SYS_HZ		1000000		/* 1us resolution */
+
+#define AT91_SLOW_CLOCK		32768	/* slow clock */
+
+#define CONFIG_AT91SAM9260	1	/* It's an Atmel AT91SAM9260 SoC*/
+#define CONFIG_AFEB9260		1	/* on an AFEB9260 Board	*/
+#undef CONFIG_USE_IRQ			/* we don't need IRQ/FIQ stuff	*/
+
+#define CONFIG_CMDLINE_TAG	1	/* enable passing of ATAGs	*/
+#define CONFIG_SETUP_MEMORY_TAGS 1
+#define CONFIG_INITRD_TAG	1
+
+#define CONFIG_SKIP_LOWLEVEL_INIT
+#define CONFIG_SKIP_RELOCATE_UBOOT
+
+/*
+ * Hardware drivers
+ */
+#define CONFIG_ATMEL_USART	1
+#undef CONFIG_USART0
+#undef CONFIG_USART1
+#undef CONFIG_USART2
+#define CONFIG_USART3		1	/* USART 3 is DBGU */
+
+#define CONFIG_BOOTDELAY	3
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE	1
+#define CONFIG_BOOTP_BOOTPATH		1
+#define CONFIG_BOOTP_GATEWAY		1
+#define CONFIG_BOOTP_HOSTNAME		1
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+#undef CONFIG_CMD_BDI
+#undef CONFIG_CMD_IMI
+#undef CONFIG_CMD_AUTOSCRIPT
+#undef CONFIG_CMD_FPGA
+#undef CONFIG_CMD_LOADS
+#undef CONFIG_CMD_IMLS
+
+#define CONFIG_CMD_PING		1
+#define CONFIG_CMD_DHCP		1
+
+#define CONFIG_CMD_NAND		1
+#define CONFIG_CMD_USB		1
+
+/* SDRAM */
+#define CONFIG_NR_DRAM_BANKS		1
+#define PHYS_SDRAM			0x20000000
+#define PHYS_SDRAM_SIZE			0x04000000	/* 64 megs */
+
+/* DataFlash */
+#define CONFIG_HAS_DATAFLASH		1
+#define CONFIG_SYS_SPI_WRITE_TOUT		(5 * CONFIG_SYS_HZ)
+#define CONFIG_SYS_MAX_DATAFLASH_BANKS		2
+#define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0	0xC0000000	/* CS0 */
+#define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS1	0xD0000000	/* CS1 */
+#define AT91_SPI_CLK			15000000
+#define DATAFLASH_TCSS			(0x1a << 16)
+#define DATAFLASH_TCHS			(0x1 << 24)
+
+/* NAND flash */
+#define NAND_MAX_CHIPS			1
+#define CONFIG_SYS_MAX_NAND_DEVICE		1
+#define CONFIG_SYS_NAND_BASE			0x40000000
+#define CONFIG_SYS_NAND_DBW_8			1
+
+/* NOR flash - no real flash on this board */
+#define CONFIG_SYS_NO_FLASH		1
+
+/* Ethernet */
+#define CONFIG_MACB			1
+#undef CONFIG_RMII			/* We have full MII there */
+#define CONFIG_RESET_PHY_R		1
+
+#define CONFIG_NET_MULTI		1
+#define CONFIG_NET_RETRY_COUNT		20
+
+/* USB */
+#define CONFIG_USB_OHCI_NEW		1
+#define LITTLEENDIAN			1
+#define CONFIG_DOS_PARTITION		1
+#define CONFIG_SYS_USB_OHCI_CPU_INIT		1
+#define CONFIG_SYS_USB_OHCI_REGS_BASE		0x00500000	/* AT91SAM9260_UHP_BASE */
+#define CONFIG_SYS_USB_OHCI_SLOT_NAME		"at91sam9260"
+#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS	1
+#define CONFIG_USB_STORAGE		1
+
+#define CONFIG_SYS_LOAD_ADDR			0x21000000	/* load address */
+
+#define CONFIG_SYS_MEMTEST_START		PHYS_SDRAM
+#define CONFIG_SYS_MEMTEST_END			0x21e00000
+
+#undef CONFIG_SYS_USE_DATAFLASH_CS0
+#define CONFIG_SYS_USE_DATAFLASH_CS1		1
+#undef CONFIG_SYS_USE_NANDFLASH
+
+/* bootstrap + u-boot + env + linux in dataflash on CS1 */
+#define CONFIG_ENV_IS_IN_DATAFLASH	1
+#define CONFIG_SYS_MONITOR_BASE	(CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS1 + 0x8400)
+#define CONFIG_ENV_OFFSET		0x4200
+#define CONFIG_ENV_ADDR		(CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS1 + CONFIG_ENV_OFFSET)
+#define CONFIG_ENV_SIZE		0x4200
+#define CONFIG_BOOTCOMMAND	"nand read 0x21000000 0xa0000 0x200000; bootm"
+#define CONFIG_BOOTARGS		"console=ttyS0,115200 "			\
+				"root=/dev/mtdblock2 "			\
+				"rw rootfstype=jffs2 panic=20"
+
+#define CONFIG_BAUDRATE		115200
+#define CONFIG_SYS_BAUDRATE_TABLE	{115200 , 19200, 38400, 57600, 9600 }
+
+#define CONFIG_SYS_PROMPT		"U-Boot> "
+#define CONFIG_SYS_CBSIZE		256
+#define CONFIG_SYS_MAXARGS		16
+#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
+#define CONFIG_SYS_LONGHELP		1
+#define CONFIG_CMDLINE_EDITING	1
+
+#define ROUND(A, B)		(((A) + (B)) & ~((B) - 1))
+/*
+ * Size of malloc() pool
+ */
+#define CONFIG_SYS_MALLOC_LEN		ROUND(3 * CONFIG_ENV_SIZE + 128*1024, 0x1000)
+#define CONFIG_SYS_GBL_DATA_SIZE	128	/* 128 bytes for initial data */
+
+#define CONFIG_STACKSIZE	(32 * 1024)	/* regular stack */
+
+#ifdef CONFIG_USE_IRQ
+#error CONFIG_USE_IRQ not supported
+#endif
+
+#endif
diff --git a/include/configs/alpr.h b/include/configs/alpr.h
index f342c7a6d..7ce820518 100644
--- a/include/configs/alpr.h
+++ b/include/configs/alpr.h
@@ -40,68 +40,68 @@
  * Base addresses -- Note these are effective addresses where the
  * actual resources get mapped (not physical addresses)
  *----------------------------------------------------------------------*/
-#define CFG_SDRAM_BASE		0x00000000	/* _must_ be 0			*/
-#define CFG_FLASH_BASE		0xffe00000	/* start of FLASH		*/
-#define CFG_MONITOR_BASE	0xfffc0000	/* start of monitor		*/
-#define CFG_PCI_MEMBASE		0x80000000	/* mapped pci memory		*/
-#define	CFG_PCI_MEMSIZE		0x40000000	/* size of mapped pci memory	*/
-#define CFG_PERIPHERAL_BASE	0xe0000000	/* internal peripherals		*/
-#define CFG_ISRAM_BASE		0xc0000000	/* internal SRAM		*/
-#define CFG_PCI_BASE		0xd0000000	/* internal PCI regs		*/
-#define CFG_PCI_MEMBASE1	CFG_PCI_MEMBASE  + 0x10000000
-#define CFG_PCI_MEMBASE2	CFG_PCI_MEMBASE1 + 0x10000000
-#define CFG_PCI_MEMBASE3	CFG_PCI_MEMBASE2 + 0x10000000
-
-
-#define CFG_FPGA_BASE	    (CFG_PERIPHERAL_BASE + 0x08300000)
-#define CFG_NVRAM_BASE_ADDR (CFG_PERIPHERAL_BASE + 0x08000000)
+#define CONFIG_SYS_SDRAM_BASE		0x00000000	/* _must_ be 0			*/
+#define CONFIG_SYS_FLASH_BASE		0xffe00000	/* start of FLASH		*/
+#define CONFIG_SYS_MONITOR_BASE	0xfffc0000	/* start of monitor		*/
+#define CONFIG_SYS_PCI_MEMBASE		0x80000000	/* mapped pci memory		*/
+#define	CONFIG_SYS_PCI_MEMSIZE		0x40000000	/* size of mapped pci memory	*/
+#define CONFIG_SYS_PERIPHERAL_BASE	0xe0000000	/* internal peripherals		*/
+#define CONFIG_SYS_ISRAM_BASE		0xc0000000	/* internal SRAM		*/
+#define CONFIG_SYS_PCI_BASE		0xd0000000	/* internal PCI regs		*/
+#define CONFIG_SYS_PCI_MEMBASE1	CONFIG_SYS_PCI_MEMBASE  + 0x10000000
+#define CONFIG_SYS_PCI_MEMBASE2	CONFIG_SYS_PCI_MEMBASE1 + 0x10000000
+#define CONFIG_SYS_PCI_MEMBASE3	CONFIG_SYS_PCI_MEMBASE2 + 0x10000000
+
+
+#define CONFIG_SYS_FPGA_BASE	    (CONFIG_SYS_PERIPHERAL_BASE + 0x08300000)
+#define CONFIG_SYS_NVRAM_BASE_ADDR (CONFIG_SYS_PERIPHERAL_BASE + 0x08000000)
 
 /*-----------------------------------------------------------------------
  * Initial RAM & stack pointer (placed in internal SRAM)
  *----------------------------------------------------------------------*/
-#define CFG_TEMP_STACK_OCM  1
-#define CFG_OCM_DATA_ADDR   CFG_ISRAM_BASE
-#define CFG_INIT_RAM_ADDR   CFG_ISRAM_BASE  /* Initial RAM address	*/
-#define CFG_INIT_RAM_END    0x2000	    /* End of used area in RAM	*/
-#define CFG_GBL_DATA_SIZE   128		    /* num bytes initial data	*/
+#define CONFIG_SYS_TEMP_STACK_OCM  1
+#define CONFIG_SYS_OCM_DATA_ADDR   CONFIG_SYS_ISRAM_BASE
+#define CONFIG_SYS_INIT_RAM_ADDR   CONFIG_SYS_ISRAM_BASE  /* Initial RAM address	*/
+#define CONFIG_SYS_INIT_RAM_END    0x2000	    /* End of used area in RAM	*/
+#define CONFIG_SYS_GBL_DATA_SIZE   128		    /* num bytes initial data	*/
 
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_POST_WORD_ADDR	(CFG_GBL_DATA_OFFSET - 0x4)
-#define CFG_INIT_SP_OFFSET	CFG_POST_WORD_ADDR
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_POST_WORD_ADDR	(CONFIG_SYS_GBL_DATA_OFFSET - 0x4)
+#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_POST_WORD_ADDR
 
-#define CFG_MONITOR_LEN	    (256 * 1024)    /* Reserve 256 kB for Mon	*/
-#define CFG_MALLOC_LEN	    (128 * 1024)    /* Reserve 128 kB for malloc*/
+#define CONFIG_SYS_MONITOR_LEN	    (256 * 1024)    /* Reserve 256 kB for Mon	*/
+#define CONFIG_SYS_MALLOC_LEN	    (128 * 1024)    /* Reserve 128 kB for malloc*/
 
 /*-----------------------------------------------------------------------
  * Serial Port
  *----------------------------------------------------------------------*/
-#undef	CFG_EXT_SERIAL_CLOCK
+#undef	CONFIG_SYS_EXT_SERIAL_CLOCK
 #define CONFIG_BAUDRATE		115200
 #define	CONFIG_UART1_CONSOLE		/* define for uart1 as console	*/
 
-#define CFG_BAUDRATE_TABLE  \
+#define CONFIG_SYS_BAUDRATE_TABLE  \
     {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
 
 /*-----------------------------------------------------------------------
  * FLASH related
  *----------------------------------------------------------------------*/
-#define CFG_FLASH_CFI		1	/* The flash is CFI compatible		*/
+#define CONFIG_SYS_FLASH_CFI		1	/* The flash is CFI compatible		*/
 #define CONFIG_FLASH_CFI_DRIVER	1	/* Use common CFI driver		*/
-#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
-#define CFG_MAX_FLASH_SECT	512	/* max number of sectors on one chip	*/
-#define CFG_FLASH_USE_BUFFER_WRITE 1	/* use buffered writes (20x faster)	*/
-#define CFG_FLASH_EMPTY_INFO		/* print 'E' for empty sector on flinfo */
-#define CFG_FLASH_QUIET_TEST	1	/* don't warn upon unknown flash	*/
+#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
+#define CONFIG_SYS_MAX_FLASH_SECT	512	/* max number of sectors on one chip	*/
+#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1	/* use buffered writes (20x faster)	*/
+#define CONFIG_SYS_FLASH_EMPTY_INFO		/* print 'E' for empty sector on flinfo */
+#define CONFIG_SYS_FLASH_QUIET_TEST	1	/* don't warn upon unknown flash	*/
 
-#define CFG_ENV_IS_IN_FLASH     1	/* use FLASH for environment vars	*/
+#define CONFIG_ENV_IS_IN_FLASH     1	/* use FLASH for environment vars	*/
 
-#define CFG_ENV_SECT_SIZE	0x10000	/* size of one complete sector		*/
-#define CFG_ENV_ADDR		(CFG_MONITOR_BASE-CFG_ENV_SECT_SIZE)
-#define	CFG_ENV_SIZE		0x2000	/* Total Size of Environment Sector	*/
+#define CONFIG_ENV_SECT_SIZE	0x10000	/* size of one complete sector		*/
+#define CONFIG_ENV_ADDR		(CONFIG_SYS_MONITOR_BASE-CONFIG_ENV_SECT_SIZE)
+#define	CONFIG_ENV_SIZE		0x2000	/* Total Size of Environment Sector	*/
 
 /* Address and size of Redundant Environment Sector	*/
-#define CFG_ENV_ADDR_REDUND	(CFG_ENV_ADDR-CFG_ENV_SECT_SIZE)
-#define CFG_ENV_SIZE_REDUND	(CFG_ENV_SIZE)
+#define CONFIG_ENV_ADDR_REDUND	(CONFIG_ENV_ADDR-CONFIG_ENV_SECT_SIZE)
+#define CONFIG_ENV_SIZE_REDUND	(CONFIG_ENV_SIZE)
 
 /*-----------------------------------------------------------------------
  * DDR SDRAM
@@ -109,7 +109,7 @@
 #undef CONFIG_SPD_EEPROM		/* Don't use SPD EEPROM for setup	*/
 #define CONFIG_SDRAM_BANK0	1	/* init onboard DDR SDRAM bank 0	*/
 #undef CONFIG_SDRAM_ECC			/* enable ECC support			*/
-#define CFG_SDRAM_TABLE	{ \
+#define CONFIG_SYS_SDRAM_TABLE	{ \
 		{(256 << 20), 13, 0x000C4001}, /* 256MB mode 3, 13x10(4)*/ \
 		{(64 << 20),  12, 0x00082001}} /* 64MB mode 2, 12x9(4)	*/
 
@@ -118,22 +118,21 @@
  *----------------------------------------------------------------------*/
 #define CONFIG_HARD_I2C		1	/* I2C with hardware support	*/
 #undef	CONFIG_SOFT_I2C			/* I2C bit-banged		*/
-#define CFG_I2C_SPEED		100000	/* I2C speed and slave address	*/
-#define CFG_I2C_SLAVE		0x7F
-#define CFG_I2C_NOPROBES	{0x69}	/* Don't probe these addrs	*/
+#define CONFIG_SYS_I2C_SPEED		100000	/* I2C speed and slave address	*/
+#define CONFIG_SYS_I2C_SLAVE		0x7F
+#define CONFIG_SYS_I2C_NOPROBES	{0x69}	/* Don't probe these addrs	*/
 
 /*-----------------------------------------------------------------------
  * I2C EEPROM (PCF8594C)
  *----------------------------------------------------------------------*/
-#define CFG_I2C_EEPROM_ADDR	0x54	/* EEPROM PCF8594C		*/
-#define CFG_I2C_EEPROM_ADDR_LEN 1	/* Bytes of address		*/
+#define CONFIG_SYS_I2C_EEPROM_ADDR	0x54	/* EEPROM PCF8594C		*/
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1	/* Bytes of address		*/
 /* mask of address bits that overflow into the "EEPROM chip address"	*/
-#define CFG_I2C_EEPROM_ADDR_OVERFLOW	0x07
-#define CFG_EEPROM_PAGE_WRITE_BITS 3	/* The Philips PCF8594C has	*/
+#define CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW	0x07
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3	/* The Philips PCF8594C has	*/
 					/* 8 byte page write mode using */
 					/* last 3 bits of the address	*/
-#define CFG_EEPROM_PAGE_WRITE_DELAY_MS	40   /* and takes up to 40 msec */
-#define CFG_EEPROM_PAGE_WRITE_ENABLE
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	40   /* and takes up to 40 msec */
 
 #define CONFIG_PREBOOT	"echo;"	\
 	"echo Type \"run kernelx\" to boot the system;"			\
@@ -197,8 +196,9 @@
 #define CONFIG_BAUDRATE		115200
 
 #define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
-#define CFG_LOADS_BAUD_CHANGE	1	/* allow baudrate change	*/
+#define CONFIG_SYS_LOADS_BAUD_CHANGE	1	/* allow baudrate change	*/
 
+#define CONFIG_PPC4xx_EMAC
 #define CONFIG_MII		1	/* MII PHY management		*/
 #define CONFIG_NET_MULTI	1
 #define CONFIG_PHY_ADDR		0x02	/* dummy setting, no EMAC0 used	*/
@@ -212,7 +212,7 @@
 #define CONFIG_PHY_RESET	1	/* reset phy upon startup	*/
 #define CONFIG_M88E1111_PHY	1	/* needed for PHY specific setup*/
 #define CONFIG_PHY_GIGE		1	/* Include GbE speed/duplex detection */
-#define CFG_RX_ETH_BUFFER	32	/* Number of ethernet rx buffers & descriptors */
+#define CONFIG_SYS_RX_ETH_BUFFER	32	/* Number of ethernet rx buffers & descriptors */
 
 #define CONFIG_NETCONSOLE		/* include NetConsole support	*/
 
@@ -235,43 +235,40 @@
 #define CONFIG_CMD_DHCP
 #define CONFIG_CMD_DIAG
 #define CONFIG_CMD_EEPROM
-#define CONFIG_CMD_ELF
 #define CONFIG_CMD_FPGA
 #define CONFIG_CMD_I2C
 #define CONFIG_CMD_IRQ
 #define CONFIG_CMD_MII
 #define CONFIG_CMD_NAND
 #define CONFIG_CMD_NET
-#define CONFIG_CMD_NFS
 #define CONFIG_CMD_PCI
 #define CONFIG_CMD_PING
-#define CONFIG_CMD_REGINFO
-
+#undef CONFIG_CMD_NFS
 
 #undef CONFIG_WATCHDOG			/* watchdog disabled		*/
 
 /*
  * Miscellaneous configurable options
  */
-#define CFG_LONGHELP			/* undef to save memory		*/
-#define CFG_PROMPT	"=> "		/* Monitor Command Prompt	*/
+#define CONFIG_SYS_LONGHELP			/* undef to save memory		*/
+#define CONFIG_SYS_PROMPT	"=> "		/* Monitor Command Prompt	*/
 #if defined(CONFIG_CMD_KGDB)
-#define CFG_CBSIZE	1024		/* Console I/O Buffer Size	*/
+#define CONFIG_SYS_CBSIZE	1024		/* Console I/O Buffer Size	*/
 #else
-#define CFG_CBSIZE	256		/* Console I/O Buffer Size	*/
+#define CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size	*/
 #endif
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define CFG_MAXARGS	16		/* max number of command args	*/
-#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS	16		/* max number of command args	*/
+#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
 
-#define CFG_ALT_MEMTEST		1	/* Enable more extensive memtest*/
-#define CFG_MEMTEST_START	0x0400000	/* memtest works on	*/
-#define CFG_MEMTEST_END		0x0C00000	/* 4 ... 12 MB in DRAM	*/
+#define CONFIG_SYS_ALT_MEMTEST		1	/* Enable more extensive memtest*/
+#define CONFIG_SYS_MEMTEST_START	0x0400000	/* memtest works on	*/
+#define CONFIG_SYS_MEMTEST_END		0x0C00000	/* 4 ... 12 MB in DRAM	*/
 
-#define CFG_LOAD_ADDR		0x100000	/* default load address */
-#define CFG_EXTBDINFO		1	/* To use extended board_into (bd_t) */
+#define CONFIG_SYS_LOAD_ADDR		0x100000	/* default load address */
+#define CONFIG_SYS_EXTBDINFO		1	/* To use extended board_into (bd_t) */
 
-#define CFG_HZ			1000	/* decrementer freq: 1 ms ticks */
+#define CONFIG_SYS_HZ			1000	/* decrementer freq: 1 ms ticks */
 
 #define CONFIG_CMDLINE_EDITING	1	/* add command line history	*/
 #define CONFIG_LOOPW            1       /* enable loopw command         */
@@ -279,7 +276,7 @@
 #define CONFIG_ZERO_BOOTDELAY_CHECK	/* check for keypress on bootdelay==0 */
 #define CONFIG_VERSION_VARIABLE	1	/* include version env variable */
 
-#define CFG_4xx_RESET_TYPE	0x2	/* use chip reset on this board	*/
+#define CONFIG_SYS_4xx_RESET_TYPE	0x2	/* use chip reset on this board	*/
 
 /*-----------------------------------------------------------------------
  * PCI stuff
@@ -289,15 +286,15 @@
 #define CONFIG_PCI			/* include pci support		*/
 #define CONFIG_PCI_PNP			/* do pci plug-and-play		*/
 #define CONFIG_PCI_SCAN_SHOW		/* show pci devices on startup	*/
-#define CFG_PCI_TARGBASE    0x80000000	/* PCIaddr mapped to CFG_PCI_MEMBASE */
+#define CONFIG_SYS_PCI_TARGBASE    0x80000000	/* PCIaddr mapped to CONFIG_SYS_PCI_MEMBASE */
 #define CONFIG_PCI_BOOTDELAY	1       /* enable pci bootdelay variable*/
 
 /* Board-specific PCI */
-#define CFG_PCI_TARGET_INIT		/* let board init pci target    */
-#define CFG_PCI_MASTER_INIT
+#define CONFIG_SYS_PCI_TARGET_INIT		/* let board init pci target    */
+#define CONFIG_SYS_PCI_MASTER_INIT
 
-#define CFG_PCI_SUBSYS_VENDORID 0x10e8	/* AMCC */
-#define CFG_PCI_SUBSYS_DEVICEID 0xcafe	/* Whatever */
+#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x10e8	/* AMCC */
+#define CONFIG_SYS_PCI_SUBSYS_DEVICEID 0xcafe	/* Whatever */
 
 /*-----------------------------------------------------------------------
  * FPGA stuff
@@ -305,8 +302,8 @@
 #define CONFIG_FPGA
 #define CONFIG_FPGA_ALTERA
 #define CONFIG_FPGA_CYCLON2
-#define CFG_FPGA_CHECK_CTRLC
-#define CFG_FPGA_PROG_FEEDBACK
+#define CONFIG_SYS_FPGA_CHECK_CTRLC
+#define CONFIG_SYS_FPGA_PROG_FEEDBACK
 #define CONFIG_FPGA_COUNT       1		/* Ich habe 2 ... aber in
 					Reihe geschaltet -> sollte gehen,
 					aufpassen mit Datasize ist jetzt
@@ -315,54 +312,54 @@
 					Mode erklaert ...*/
 
 /* FPGA program pin configuration */
-#define CFG_GPIO_CLK		18	/* FPGA clk pin (cpu output)		*/
-#define CFG_GPIO_DATA		19	/* FPGA data pin (cpu output)		*/
-#define CFG_GPIO_STATUS		20	/* FPGA status pin (cpu input)		*/
-#define CFG_GPIO_CONFIG		21	/* FPGA CONFIG pin (cpu output)		*/
-#define CFG_GPIO_CON_DON	22	/* FPGA CONFIG_DONE pin (cpu input)	*/
+#define CONFIG_SYS_GPIO_CLK		18	/* FPGA clk pin (cpu output)		*/
+#define CONFIG_SYS_GPIO_DATA		19	/* FPGA data pin (cpu output)		*/
+#define CONFIG_SYS_GPIO_STATUS		20	/* FPGA status pin (cpu input)		*/
+#define CONFIG_SYS_GPIO_CONFIG		21	/* FPGA CONFIG pin (cpu output)		*/
+#define CONFIG_SYS_GPIO_CON_DON	22	/* FPGA CONFIG_DONE pin (cpu input)	*/
 
-#define CFG_GPIO_SEL_DPR	14	/* cpu output */
-#define CFG_GPIO_SEL_AVR	15	/* cpu output */
-#define CFG_GPIO_PROG_EN	23	/* cpu output */
+#define CONFIG_SYS_GPIO_SEL_DPR	14	/* cpu output */
+#define CONFIG_SYS_GPIO_SEL_AVR	15	/* cpu output */
+#define CONFIG_SYS_GPIO_PROG_EN	23	/* cpu output */
 
 /*-----------------------------------------------------------------------
  * Definitions for GPIO setup
  *-----------------------------------------------------------------------*/
-#define CFG_GPIO_SHUTDOWN	(0x80000000 >> 6)
-#define CFG_GPIO_SSD_EMPTY	(0x80000000 >> 9)
-#define CFG_GPIO_EREADY		(0x80000000 >> 26)
-#define CFG_GPIO_REV0		(0x80000000 >> 14)
-#define CFG_GPIO_REV1		(0x80000000 >> 15)
+#define CONFIG_SYS_GPIO_SHUTDOWN	(0x80000000 >> 6)
+#define CONFIG_SYS_GPIO_SSD_EMPTY	(0x80000000 >> 9)
+#define CONFIG_SYS_GPIO_EREADY		(0x80000000 >> 26)
+#define CONFIG_SYS_GPIO_REV0		(0x80000000 >> 14)
+#define CONFIG_SYS_GPIO_REV1		(0x80000000 >> 15)
 
 /*-----------------------------------------------------------------------
  * NAND-FLASH stuff
  *-----------------------------------------------------------------------*/
-#define CFG_MAX_NAND_DEVICE	4
-#define NAND_MAX_CHIPS		CFG_MAX_NAND_DEVICE
-#define CFG_NAND_BASE		0xF0000000	/* NAND FLASH Base Address	*/
-#define CFG_NAND_BASE_LIST	{ CFG_NAND_BASE + 0, CFG_NAND_BASE + 2,	\
-				  CFG_NAND_BASE + 4, CFG_NAND_BASE + 6 }
-#define CFG_NAND_QUIET_TEST	1	/* don't warn upon unknown NAND flash	*/
+#define CONFIG_SYS_MAX_NAND_DEVICE	4
+#define NAND_MAX_CHIPS		CONFIG_SYS_MAX_NAND_DEVICE
+#define CONFIG_SYS_NAND_BASE		0xF0000000	/* NAND FLASH Base Address	*/
+#define CONFIG_SYS_NAND_BASE_LIST	{ CONFIG_SYS_NAND_BASE + 0, CONFIG_SYS_NAND_BASE + 2,	\
+				  CONFIG_SYS_NAND_BASE + 4, CONFIG_SYS_NAND_BASE + 6 }
+#define CONFIG_SYS_NAND_QUIET_TEST	1	/* don't warn upon unknown NAND flash	*/
 
 /*-----------------------------------------------------------------------
  * External Bus Controller (EBC) Setup
  *----------------------------------------------------------------------*/
-#define CFG_FLASH		CFG_FLASH_BASE
+#define CONFIG_SYS_FLASH		CONFIG_SYS_FLASH_BASE
 
 /* Memory Bank 0 (Flash Bank 0, NOR-FLASH) initialization			*/
-#define CFG_EBC_PB0AP		0x92015480
-#define CFG_EBC_PB0CR		(CFG_FLASH | 0x3A000) /* BS=2MB,BU=R/W,BW=16bit */
+#define CONFIG_SYS_EBC_PB0AP		0x92015480
+#define CONFIG_SYS_EBC_PB0CR		(CONFIG_SYS_FLASH | 0x3A000) /* BS=2MB,BU=R/W,BW=16bit */
 
 /* Memory Bank 1 (NAND-FLASH) initialization					*/
-#define CFG_EBC_PB1AP		0x01840380	/* TWT=3			*/
-#define CFG_EBC_PB1CR		(CFG_NAND_BASE | 0x18000) /* BS=1MB,BU=R/W,BW=8bit */
+#define CONFIG_SYS_EBC_PB1AP		0x01840380	/* TWT=3			*/
+#define CONFIG_SYS_EBC_PB1CR		(CONFIG_SYS_NAND_BASE | 0x18000) /* BS=1MB,BU=R/W,BW=8bit */
 
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
+#define CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
 
 /*
  * Internal Definitions
diff --git a/include/configs/amcc-common.h b/include/configs/amcc-common.h
index 1f27d785b..d3dc3e533 100644
--- a/include/configs/amcc-common.h
+++ b/include/configs/amcc-common.h
@@ -23,35 +23,36 @@
 #ifndef __AMCC_COMMON_H
 #define __AMCC_COMMON_H
 
-#define CFG_SDRAM_BASE		0x00000000	/* _must_ be 0		*/
-#define CFG_MONITOR_BASE	TEXT_BASE	/* Start of U-Boot	*/
-#define CFG_MONITOR_LEN		(0xFFFFFFFF - CFG_MONITOR_BASE + 1)
-#define CFG_MALLOC_LEN		(1 << 20)	/* Reserved for malloc	*/
+#define CONFIG_SYS_SDRAM_BASE		0x00000000	/* _must_ be 0		*/
+#define CONFIG_SYS_MONITOR_BASE	TEXT_BASE	/* Start of U-Boot	*/
+#define CONFIG_SYS_MONITOR_LEN		(0xFFFFFFFF - CONFIG_SYS_MONITOR_BASE + 1)
+#define CONFIG_SYS_MALLOC_LEN		(1 << 20)	/* Reserved for malloc	*/
 
 /*
  * UART
  */
 #define CONFIG_BAUDRATE		115200
 #define CONFIG_SERIAL_MULTI
-#define CFG_BAUDRATE_TABLE  \
+#define CONFIG_SYS_BAUDRATE_TABLE  \
     {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400}
 
 /*
  * I2C
  */
 #define CONFIG_HARD_I2C			/* I2C with hardware support	*/
-#define CFG_I2C_SLAVE		0x7F
+#define CONFIG_SYS_I2C_SLAVE		0x7F
 
 /*
  * Ethernet/EMAC/PHY
  */
+#define CONFIG_PPC4xx_EMAC
 #define CONFIG_MII			/* MII PHY management		*/
 #define CONFIG_NET_MULTI
 #define CONFIG_NETCONSOLE		/* include NetConsole support	*/
 #if defined(CONFIG_440)
-#define CFG_RX_ETH_BUFFER	32	/* number of eth rx buffers	*/
+#define CONFIG_SYS_RX_ETH_BUFFER	32	/* number of eth rx buffers	*/
 #else
-#define CFG_RX_ETH_BUFFER	16	/* number of eth rx buffers	*/
+#define CONFIG_SYS_RX_ETH_BUFFER	16	/* number of eth rx buffers	*/
 #endif
 
 /*
@@ -79,24 +80,24 @@
  * Miscellaneous configurable options
  */
 #define CONFIG_BOOTDELAY	5	/* autoboot after 5 seconds	*/
-#define CFG_LONGHELP			/* undef to save memory		*/
-#define CFG_PROMPT		"=> "	/* Monitor Command Prompt	*/
+#define CONFIG_SYS_LONGHELP			/* undef to save memory		*/
+#define CONFIG_SYS_PROMPT		"=> "	/* Monitor Command Prompt	*/
 #if defined(CONFIG_CMD_KGDB)
-#define CFG_CBSIZE		1024	/* Console I/O Buffer Size	*/
+#define CONFIG_SYS_CBSIZE		1024	/* Console I/O Buffer Size	*/
 #else
-#define CFG_CBSIZE		256	/* Console I/O Buffer Size	*/
+#define CONFIG_SYS_CBSIZE		256	/* Console I/O Buffer Size	*/
 #endif
-#define CFG_PBSIZE		(CFG_CBSIZE+sizeof(CFG_PROMPT)+16)
-#define CFG_MAXARGS		16	/* max number of command args	*/
-#define CFG_BARGSIZE		CFG_CBSIZE /* Boot Argument Buffer Size	*/
+#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
+#define CONFIG_SYS_MAXARGS		16	/* max number of command args	*/
+#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size	*/
 
-#define CFG_MEMTEST_START	0x0400000 /* memtest works on		*/
-#define CFG_MEMTEST_END		0x0C00000 /* 4 ... 12 MB in DRAM	*/
+#define CONFIG_SYS_MEMTEST_START	0x0400000 /* memtest works on		*/
+#define CONFIG_SYS_MEMTEST_END		0x0C00000 /* 4 ... 12 MB in DRAM	*/
 
-#define CFG_LOAD_ADDR		0x100000  /* default load address	*/
-#define CFG_EXTBDINFO			/* To use extended board_into (bd_t) */
+#define CONFIG_SYS_LOAD_ADDR		0x100000  /* default load address	*/
+#define CONFIG_SYS_EXTBDINFO			/* To use extended board_into (bd_t) */
 
-#define CFG_HZ			1000	/* decrementer freq: 1 ms ticks	*/
+#define CONFIG_SYS_HZ			1000	/* decrementer freq: 1 ms ticks	*/
 
 #define CONFIG_CMDLINE_EDITING		/* add command line history	*/
 #define CONFIG_AUTO_COMPLETE		/* add autocompletion support	*/
@@ -104,15 +105,15 @@
 #define CONFIG_MX_CYCLIC		/* enable mdc/mwc commands      */
 #define CONFIG_ZERO_BOOTDELAY_CHECK	/* check for keypress on bootdelay==0 */
 #define CONFIG_VERSION_VARIABLE 	/* include version env variable */
-#define CFG_CONSOLE_INFO_QUIET		/* don't print console @ startup*/
+#define CONFIG_SYS_CONSOLE_INFO_QUIET		/* don't print console @ startup*/
 
-#define CFG_HUSH_PARSER			/* Use the HUSH parser		*/
-#ifdef	CFG_HUSH_PARSER
-#define	CFG_PROMPT_HUSH_PS2	"> "
+#define CONFIG_SYS_HUSH_PARSER			/* Use the HUSH parser		*/
+#ifdef	CONFIG_SYS_HUSH_PARSER
+#define	CONFIG_SYS_PROMPT_HUSH_PS2	"> "
 #endif
 
 #define CONFIG_LOADS_ECHO		/* echo on for serial download	*/
-#define CFG_LOADS_BAUD_CHANGE		/* allow baudrate change	*/
+#define CONFIG_SYS_LOADS_BAUD_CHANGE		/* allow baudrate change	*/
 
 /*
  * BOOTP options
@@ -128,7 +129,7 @@
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define CFG_BOOTMAPSZ		(8 << 20) /* Initial Memory map for Linux */
+#define CONFIG_SYS_BOOTMAPSZ		(8 << 20) /* Initial Memory map for Linux */
 
 /*
  * Internal Definitions
@@ -160,6 +161,13 @@
 #endif
 
 /*
+ * Only very few boards have default netdev not set to eth0 (like Arches)
+ */
+#if !defined(CONFIG_USE_NETDEV)
+#define CONFIG_USE_NETDEV	eth0
+#endif
+
+/*
  * Only some 4xx PPC's are equipped with an FPU
  */
 #if defined(CONFIG_440EP) || defined(CONFIG_440EPX) || \
@@ -184,7 +192,7 @@
  * General common environment variables shared on all AMCC eval boards
  */
 #define CONFIG_AMCC_DEF_ENV						\
-	"netdev=eth0\0"							\
+	"netdev=" xstr(CONFIG_USE_NETDEV) "\0"				\
 	"nfsargs=setenv bootargs root=/dev/nfs rw "			\
 		"nfsroot=${serverip}:${rootpath}\0"			\
 	"ramargs=setenv bootargs root=/dev/ram rw\0"			\
@@ -197,8 +205,10 @@
 	"initrd_high=30000000\0"					\
 	"kernel_addr_r=400000\0"					\
 	"fdt_addr_r=800000\0"						\
+	"ramdisk_addr_r=C00000\0"					\
 	"hostname=" xstr(CONFIG_HOSTNAME) "\0"				\
 	"bootfile=" xstr(CONFIG_HOSTNAME) "/uImage\0"			\
+	"ramdisk_file=" xstr(CONFIG_HOSTNAME) "/uRamdisk\0"		\
 	CONFIG_AMCC_DEF_ENV_ROOTPATH
 
 /*
@@ -214,6 +224,12 @@
 		"tftp ${fdt_addr_r} ${fdt_file}; "			\
 		"run nfsargs addip addtty addmisc;"			\
 		"bootm ${kernel_addr_r} - ${fdt_addr_r}\0"		\
+	"net_self_load=tftp ${kernel_addr_r} ${bootfile};"		\
+		"tftp ${fdt_addr_r} ${fdt_file};"			\
+		"tftp ${ramdisk_addr_r} ${ramdisk_file};\0"		\
+	"net_self=run net_self_load;"					\
+		"run ramargs addip addtty addmisc;"			\
+		"bootm ${kernel_addr_r} ${ramdisk_addr_r} ${fdt_addr_r}\0" \
 	"fdt_file=" xstr(CONFIG_HOSTNAME) "/" xstr(CONFIG_HOSTNAME) ".dtb\0"
 
 /*
@@ -244,9 +260,9 @@
 
 #define CONFIG_AMCC_DEF_ENV_NOR_UPD					\
 	"load=tftp 200000 " xstr(CONFIG_HOSTNAME) "/u-boot.bin\0"	\
-	"update=protect off " xstr(CFG_MONITOR_BASE) " FFFFFFFF;"	\
-		"era " xstr(CFG_MONITOR_BASE) " FFFFFFFF;"		\
-		"cp.b ${fileaddr} " xstr(CFG_MONITOR_BASE) " ${filesize};" \
+	"update=protect off " xstr(CONFIG_SYS_MONITOR_BASE) " FFFFFFFF;"	\
+		"era " xstr(CONFIG_SYS_MONITOR_BASE) " FFFFFFFF;"		\
+		"cp.b ${fileaddr} " xstr(CONFIG_SYS_MONITOR_BASE) " ${filesize};" \
 		"setenv filesize;saveenv\0"				\
 	"upd=run load update\0"						\
 
diff --git a/include/configs/ap325rxa.h b/include/configs/ap325rxa.h
index 81a118dc5..9134ad1dc 100644
--- a/include/configs/ap325rxa.h
+++ b/include/configs/ap325rxa.h
@@ -63,19 +63,19 @@
 #define AP325RXA_FLASH_BANK_SIZE	(128 * 1024 * 1024)
 
 /* undef to save memory	*/
-#define CFG_LONGHELP
+#define CONFIG_SYS_LONGHELP
 /* Monitor Command Prompt */
-#define CFG_PROMPT		"=> "
+#define CONFIG_SYS_PROMPT		"=> "
 /* Buffer size for input from the Console */
-#define CFG_CBSIZE		256
+#define CONFIG_SYS_CBSIZE		256
 /* Buffer size for Console output */
-#define CFG_PBSIZE		256
+#define CONFIG_SYS_PBSIZE		256
 /* max args accepted for monitor commands */
-#define CFG_MAXARGS		16
+#define CONFIG_SYS_MAXARGS		16
 /* Buffer size for Boot Arguments passed to kernel */
-#define CFG_BARGSIZE	512
+#define CONFIG_SYS_BARGSIZE	512
 /* List of legal baudrate settings for this board */
-#define CFG_BAUDRATE_TABLE	{ 38400 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 38400 }
 
 /* SCIF */
 #define CONFIG_SCIF_CONSOLE 1
@@ -83,95 +83,94 @@
 #define CONFIG_CONS_SCIF5	1
 
 /* Suppress display of console information at boot */
-#undef  CFG_CONSOLE_INFO_QUIET
-#undef  CFG_CONSOLE_OVERWRITE_ROUTINE
-#undef  CFG_CONSOLE_ENV_OVERWRITE
+#undef  CONFIG_SYS_CONSOLE_INFO_QUIET
+#undef  CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
+#undef  CONFIG_SYS_CONSOLE_ENV_OVERWRITE
 
-#define CFG_MEMTEST_START	(AP325RXA_SDRAM_BASE)
-#define CFG_MEMTEST_END		(CFG_MEMTEST_START + (60 * 1024 * 1024))
+#define CONFIG_SYS_MEMTEST_START	(AP325RXA_SDRAM_BASE)
+#define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_MEMTEST_START + (60 * 1024 * 1024))
 
 /* Enable alternate, more extensive, memory test */
-#undef  CFG_ALT_MEMTEST
+#undef  CONFIG_SYS_ALT_MEMTEST
 /* Scratch address used by the alternate memory test */
-#undef  CFG_MEMTEST_SCRATCH
+#undef  CONFIG_SYS_MEMTEST_SCRATCH
 
 /* Enable temporary baudrate change while serial download */
-#undef  CFG_LOADS_BAUD_CHANGE
+#undef  CONFIG_SYS_LOADS_BAUD_CHANGE
 
-#define CFG_SDRAM_BASE	(AP325RXA_SDRAM_BASE)
+#define CONFIG_SYS_SDRAM_BASE	(AP325RXA_SDRAM_BASE)
 /* maybe more, but if so u-boot doesn't know about it... */
-#define CFG_SDRAM_SIZE	(128 * 1024 * 1024)
+#define CONFIG_SYS_SDRAM_SIZE	(128 * 1024 * 1024)
 /* default load address for scripts ?!? */
-#define CFG_LOAD_ADDR	(CFG_SDRAM_BASE + 16 * 1024 * 1024)
+#define CONFIG_SYS_LOAD_ADDR	(CONFIG_SYS_SDRAM_BASE + 16 * 1024 * 1024)
 
 /* Address of u-boot image in Flash (NOT run time address in SDRAM) ?!? */
-#define CFG_MONITOR_BASE	(AP325RXA_FLASH_BASE_1)
+#define CONFIG_SYS_MONITOR_BASE	(AP325RXA_FLASH_BASE_1)
 /* Monitor size */
-#define CFG_MONITOR_LEN	(128 * 1024)
+#define CONFIG_SYS_MONITOR_LEN	(128 * 1024)
 /* Size of DRAM reserved for malloc() use */
-#define CFG_MALLOC_LEN	(256 * 1024)
+#define CONFIG_SYS_MALLOC_LEN	(256 * 1024)
 /* size in bytes reserved for initial data */
-#define CFG_GBL_DATA_SIZE	(256)
-#define CFG_BOOTMAPSZ	(8 * 1024 * 1024)
+#define CONFIG_SYS_GBL_DATA_SIZE	(256)
+#define CONFIG_SYS_BOOTMAPSZ	(8 * 1024 * 1024)
 
 /* FLASH */
 #define CONFIG_FLASH_CFI_DRIVER 1
-#define CFG_FLASH_CFI
-#define CFG_FLASH_CFI_DRIVER
-#undef  CFG_FLASH_QUIET_TEST
+#define CONFIG_SYS_FLASH_CFI
+#undef  CONFIG_SYS_FLASH_QUIET_TEST
 /* print 'E' for empty sector on flinfo */
-#define CFG_FLASH_EMPTY_INFO
+#define CONFIG_SYS_FLASH_EMPTY_INFO
 /* Physical start address of Flash memory */
-#define CFG_FLASH_BASE	(AP325RXA_FLASH_BASE_1)
+#define CONFIG_SYS_FLASH_BASE	(AP325RXA_FLASH_BASE_1)
 /* Max number of sectors on each Flash chip */
-#define CFG_MAX_FLASH_SECT	512
+#define CONFIG_SYS_MAX_FLASH_SECT	512
 
 /*
  * IDE support
  */
 #define CONFIG_IDE_RESET	1
-#define CFG_PIO_MODE		1
-#define CFG_IDE_MAXBUS		1	/* IDE bus */
-#define CFG_IDE_MAXDEVICE	1
-#define CFG_ATA_BASE_ADDR	0xB4180000
-#define CFG_ATA_STRIDE		2	/* 1bit shift */
-#define CFG_ATA_DATA_OFFSET	0x200	/* data reg offset */
-#define CFG_ATA_REG_OFFSET	0x200	/* reg offset */
-#define CFG_ATA_ALT_OFFSET	0x210	/* alternate register offset */
+#define CONFIG_SYS_PIO_MODE		1
+#define CONFIG_SYS_IDE_MAXBUS		1	/* IDE bus */
+#define CONFIG_SYS_IDE_MAXDEVICE	1
+#define CONFIG_SYS_ATA_BASE_ADDR	0xB4180000
+#define CONFIG_SYS_ATA_STRIDE		2	/* 1bit shift */
+#define CONFIG_SYS_ATA_DATA_OFFSET	0x200	/* data reg offset */
+#define CONFIG_SYS_ATA_REG_OFFSET	0x200	/* reg offset */
+#define CONFIG_SYS_ATA_ALT_OFFSET	0x210	/* alternate register offset */
 
 /* if you use all NOR Flash , you change dip-switch. Please see Manual. */
-#define CFG_MAX_FLASH_BANKS	1
-#define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE + (0 * AP325RXA_FLASH_BANK_SIZE)}
+#define CONFIG_SYS_MAX_FLASH_BANKS	1
+#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE + (0 * AP325RXA_FLASH_BANK_SIZE)}
 
 /* Timeout for Flash erase operations (in ms) */
-#define CFG_FLASH_ERASE_TOUT	(3 * 1000)
+#define CONFIG_SYS_FLASH_ERASE_TOUT	(3 * 1000)
 /* Timeout for Flash write operations (in ms) */
-#define CFG_FLASH_WRITE_TOUT	(3 * 1000)
+#define CONFIG_SYS_FLASH_WRITE_TOUT	(3 * 1000)
 /* Timeout for Flash set sector lock bit operations (in ms) */
-#define CFG_FLASH_LOCK_TOUT	(3 * 1000)
+#define CONFIG_SYS_FLASH_LOCK_TOUT	(3 * 1000)
 /* Timeout for Flash clear lock bit operations (in ms) */
-#define CFG_FLASH_UNLOCK_TOUT	(3 * 1000)
+#define CONFIG_SYS_FLASH_UNLOCK_TOUT	(3 * 1000)
 
 /*
  * Use hardware flash sectors protection instead
  * of U-Boot software protection
  */
-#undef  CFG_FLASH_PROTECTION
-#undef  CFG_DIRECT_FLASH_TFTP
+#undef  CONFIG_SYS_FLASH_PROTECTION
+#undef  CONFIG_SYS_DIRECT_FLASH_TFTP
 
 /* ENV setting */
-#define CFG_ENV_IS_IN_FLASH
+#define CONFIG_ENV_IS_IN_FLASH
 #define CONFIG_ENV_OVERWRITE	1
-#define CFG_ENV_SECT_SIZE	(128 * 1024)
-#define CFG_ENV_SIZE		(CFG_ENV_SECT_SIZE)
-#define CFG_ENV_ADDR		(CFG_FLASH_BASE + CFG_MONITOR_LEN)
-/* Offset of env Flash sector relative to CFG_FLASH_BASE */
-#define CFG_ENV_OFFSET		(CFG_ENV_ADDR - CFG_FLASH_BASE)
-#define CFG_ENV_SIZE_REDUND	(CFG_ENV_SECT_SIZE)
+#define CONFIG_ENV_SECT_SIZE	(128 * 1024)
+#define CONFIG_ENV_SIZE		(CONFIG_ENV_SECT_SIZE)
+#define CONFIG_ENV_ADDR		(CONFIG_SYS_FLASH_BASE + CONFIG_SYS_MONITOR_LEN)
+/* Offset of env Flash sector relative to CONFIG_SYS_FLASH_BASE */
+#define CONFIG_ENV_OFFSET		(CONFIG_ENV_ADDR - CONFIG_SYS_FLASH_BASE)
+#define CONFIG_ENV_SIZE_REDUND	(CONFIG_ENV_SECT_SIZE)
 
 /* Board Clock */
 #define CONFIG_SYS_CLK_FREQ	33333333
 #define TMU_CLK_DIVIDER		(4)	/* 4 (default), 16, 64, 256 or 1024 */
-#define CFG_HZ			(CONFIG_SYS_CLK_FREQ / TMU_CLK_DIVIDER)
+#define CONFIG_SYS_HZ			(CONFIG_SYS_CLK_FREQ / TMU_CLK_DIVIDER)
 
 #endif	/* __AP325RXA_H */
diff --git a/include/configs/apollon.h b/include/configs/apollon.h
index c93e77a2e..dff47fc6a 100644
--- a/include/configs/apollon.h
+++ b/include/configs/apollon.h
@@ -43,16 +43,19 @@
 
 /* Boot method */
 /* uncomment if you use NOR boot */
-/* #define CFG_NOR_BOOT		1 */
+/* #define CONFIG_SYS_NOR_BOOT		1 */
 
 /* uncomment if you use NOR on CS3 */
-/* #define CFG_USE_NOR		1 */
+/* #define CONFIG_SYS_USE_NOR		1 */
 
-#ifdef CFG_NOR_BOOT
-#undef CFG_USE_NOR
-#define CFG_USE_NOR		1
+#ifdef CONFIG_SYS_NOR_BOOT
+#undef CONFIG_SYS_USE_NOR
+#define CONFIG_SYS_USE_NOR		1
 #endif
 
+/* uncommnet if you want to use UBI */
+#define CONFIG_SYS_USE_UBI
+
 #include <asm/arch/omap2420.h>	/* get chip and board defs */
 
 #define	V_SCLK	12000000
@@ -72,9 +75,10 @@
 /*
  * Size of malloc() pool
  */
-#define	CFG_ENV_SIZE SZ_128K	/* Total Size of Environment Sector */
-#define	CFG_MALLOC_LEN	(CFG_ENV_SIZE + SZ_128K)
-#define	CFG_GBL_DATA_SIZE	128	/* bytes reserved for initial data */
+#define	CONFIG_ENV_SIZE SZ_128K	/* Total Size of Environment Sector */
+#define	CONFIG_SYS_MALLOC_LEN	(CONFIG_ENV_SIZE + SZ_1M)
+/* bytes reserved for initial data */
+#define	CONFIG_SYS_GBL_DATA_SIZE	128
 
 /*
  * Hardware drivers
@@ -92,11 +96,11 @@
  */
 #define	V_NS16550_CLK	(48000000)	/* 48MHz (APLL96/2) */
 
-#define	CFG_NS16550
-#define	CFG_NS16550_SERIAL
-#define	CFG_NS16550_REG_SIZE	(-4)
-#define	CFG_NS16550_CLK	V_NS16550_CLK	/* 3MHz (1.5MHz*2) */
-#define	CFG_NS16550_COM1	OMAP2420_UART1
+#define	CONFIG_SYS_NS16550
+#define	CONFIG_SYS_NS16550_SERIAL
+#define	CONFIG_SYS_NS16550_REG_SIZE	(-4)
+#define	CONFIG_SYS_NS16550_CLK	V_NS16550_CLK	/* 3MHz (1.5MHz*2) */
+#define	CONFIG_SYS_NS16550_COM1	OMAP2420_UART1
 
 /*
  * select serial console configuration
@@ -107,7 +111,7 @@
 #define	CONFIG_ENV_OVERWRITE
 #define	CONFIG_CONS_INDEX	1
 #define	CONFIG_BAUDRATE		115200
-#define	CFG_BAUDRATE_TABLE	{9600, 19200, 38400, 57600, 115200}
+#define	CONFIG_SYS_BAUDRATE_TABLE	{9600, 19200, 38400, 57600, 115200}
 
 /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
 #include	<config_cmd_default.h>
@@ -116,9 +120,16 @@
 #define	CONFIG_CMD_DIAG
 #define	CONFIG_CMD_ONENAND
 
+#ifdef CONFIG_SYS_USE_UBI
+#define	CONFIG_CMD_JFFS2
+#define	CONFIG_CMD_UBI
+#define	CONFIG_RBTREE
+#define CONFIG_MTD_PARTITIONS
+#endif
+
 #undef	CONFIG_CMD_AUTOSCRIPT
 
-#ifndef	CFG_USE_NOR
+#ifndef	CONFIG_SYS_USE_NOR
 # undef	CONFIG_CMD_FLASH
 # undef	CONFIG_CMD_IMLS
 #endif
@@ -133,24 +144,39 @@
 #define	CONFIG_BOOTFILE	"uImage"
 #define	CONFIG_ETHADDR	00:0E:99:00:24:20
 
-#ifdef	CONFIG_APOLLON_PLUS
-# define	CONFIG_BOOTARGS "root=/dev/nfs rw mem=64M console=ttyS0,115200n8 ip=192.168.116.25:192.168.116.1:192.168.116.1:255.255.255.0:apollon:eth0:off nfsroot=/tftpboot/nfsroot profile=2"
+#ifdef CONFIG_APOLLON_PLUS
+#define CONFIG_SYS_MEM	"mem=64M"
+#else
+#define CONFIG_SYS_MEM	"mem=128"
+#endif
+
+#ifdef CONFIG_SYS_USE_UBI
+#define CONFIG_SYS_UBI "ubi.mtd=4"
 #else
-# define	CONFIG_BOOTARGS "root=/dev/nfs rw mem=128M console=ttyS0,115200n8 ip=192.168.116.25:192.168.116.1:192.168.116.1:255.255.255.0:apollon:eth0:off nfsroot=/tftpboot/nfsroot profile=2"
+#define CONFIG_SYS_UBI ""
 #endif
 
+#define CONFIG_BOOTARGS "root=/dev/nfs rw " CONFIG_SYS_MEM \
+	" console=ttyS0,115200n8" \
+	" ip=192.168.116.25:192.168.116.1:192.168.116.1:255.255.255.0:" \
+	"apollon:eth0:off nfsroot=/tftpboot/nfsroot profile=2 " \
+	CONFIG_SYS_UBI
+
 #define	CONFIG_EXTRA_ENV_SETTINGS					\
 	"Image=tftp 0x80008000 Image; go 0x80008000\0"			\
 	"zImage=tftp 0x80180000 zImage; go 0x80180000\0"		\
 	"uImage=tftp 0x80180000 uImage; bootm 0x80180000\0"		\
 	"uboot=tftp 0x80008000 u-boot.bin; go 0x80008000\0"		\
-	"xloader=tftp 0x80180000 x-load.bin; cp.w 0x80180000 0x00000400 0x1000; go 0x00000400\0"	\
+	"xloader=tftp 0x80180000 x-load.bin; "				\
+	" cp.w 0x80180000 0x00000400 0x1000; go 0x00000400\0"		\
 	"syncmode50=mw.w 0x1e442 0xc0c4; mw 0x6800a060 0xe30d1201\0"	\
 	"syncmode=mw.w 0x1e442 0xe0f4; mw 0x6800a060 0xe30d1201\0"	\
 	"norboot=cp32 0x18040000 0x80008000 0x200000; go 0x80008000\0"	\
-	"oneboot=onenand read 0x80008000 0x40000 0x200000; go 0x80008000\0"\
+	"oneboot=onenand read 0x80008000 0x40000 0x200000; go 0x80008000\0" \
 	"onesyncboot=run syncmode oneboot\0"				\
-	"updateb=tftp 0x80180000 u-boot-onenand.bin; onenand erase 0x0 0x20000; onenand write 0x80180000 0x0 0x20000\0"					\
+	"updateb=tftp 0x80180000 u-boot-onenand.bin; "			\
+	" onenand erase 0x0 0x20000; onenand write 0x80180000 0x0 0x20000\0" \
+	"ubi=setenv bootargs ${bootargs} ubi.mtd=4 ${mtdparts}; run uImage\0" \
 	"bootcmd=run uboot\0"
 
 /*
@@ -158,20 +184,21 @@
  */
 #define	V_PROMPT	"Apollon # "
 
-#define	CFG_LONGHELP	/* undef to save memory */
-#define	CFG_PROMPT	V_PROMPT
-#define	CFG_CBSIZE	256	/* Console I/O Buffer Size */
+#define	CONFIG_SYS_LONGHELP	/* undef to save memory */
+#define	CONFIG_SYS_PROMPT	V_PROMPT
+#define	CONFIG_SYS_CBSIZE	256	/* Console I/O Buffer Size */
 /* Print Buffer Size */
-#define	CFG_PBSIZE	(CFG_CBSIZE+sizeof(CFG_PROMPT)+16)
-#define	CFG_MAXARGS	16	/* max number of command args */
-#define	CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size */
-
-#define	CFG_MEMTEST_START	(OMAP2420_SDRC_CS0)	/* memtest works on */
-#define	CFG_MEMTEST_END		(OMAP2420_SDRC_CS0+SZ_31M)
-
-#undef	CFG_CLKS_IN_HZ	/* everything, incl board info, in Hz */
-
-#define	CFG_LOAD_ADDR	(OMAP2420_SDRC_CS0)	/* default load address */
+#define	CONFIG_SYS_PBSIZE	(CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
+#define	CONFIG_SYS_MAXARGS	16	/* max number of command args */
+/* Boot Argument Buffer Size */
+#define	CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE
+/* memtest works on */
+#define	CONFIG_SYS_MEMTEST_START	(OMAP2420_SDRC_CS0)
+#define	CONFIG_SYS_MEMTEST_END		(OMAP2420_SDRC_CS0+SZ_31M)
+
+#undef	CONFIG_SYS_CLKS_IN_HZ	/* everything, incl board info, in Hz */
+/* default load address */
+#define	CONFIG_SYS_LOAD_ADDR	(OMAP2420_SDRC_CS0)
 
 /* The 2420 has 12 GP timers, they can be driven by the SysClk (12/13/19.2)
  * or by 32KHz clk, or from external sig. This rate is divided by a local
@@ -179,9 +206,9 @@
  */
 #define	V_PVT	7	/* use with 12MHz/128 */
 
-#define	CFG_TIMERBASE	OMAP2420_GPT2
-#define	CFG_PVT	V_PVT	/* 2^(pvt+1) */
-#define	CFG_HZ		((CONFIG_SYS_CLK_FREQ)/(2 << CFG_PVT))
+#define	CONFIG_SYS_TIMERBASE	OMAP2420_GPT2
+#define	CONFIG_SYS_PVT	V_PVT	/* 2^(pvt+1) */
+#define	CONFIG_SYS_HZ		((CONFIG_SYS_CLK_FREQ)/(2 << CONFIG_SYS_PVT))
 
 /*-----------------------------------------------------------------------
  * Stack sizes
@@ -205,27 +232,40 @@
 /*-----------------------------------------------------------------------
  * FLASH and environment organization
  */
-#ifdef	CFG_USE_NOR
+#ifdef	CONFIG_SYS_USE_NOR
 /* OneNAND boot, NOR has CS3, But NOR has CS0 when NOR boot */
-# define	CFG_FLASH_BASE		0x18000000
-# define	CFG_MAX_FLASH_BANKS	1
-# define	CFG_MAX_FLASH_SECT	1024
+# define	CONFIG_SYS_FLASH_BASE		0x18000000
+# define	CONFIG_SYS_MAX_FLASH_BANKS	1
+# define	CONFIG_SYS_MAX_FLASH_SECT	1024
 /*-----------------------------------------------------------------------
-
  * CFI FLASH driver setup
  */
-# define	CFG_FLASH_CFI	1	/* Flash memory is CFI compliant */
+/* Flash memory is CFI compliant */
+# define	CONFIG_SYS_FLASH_CFI	1
 # define	CONFIG_FLASH_CFI_DRIVER	1	/* Use drivers/cfi_flash.c */
-/* #define CFG_FLASH_USE_BUFFER_WRITE 1 */ /* Use buffered writes (~10x faster) */
-# define	CFG_FLASH_PROTECTION	1	/* Use h/w sector protection*/
+/* Use buffered writes (~10x faster) */
+/* #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 */
+/* Use h/w sector protection*/
+# define	CONFIG_SYS_FLASH_PROTECTION	1
 
-#else	/* !CFG_USE_NOR */
-# define	CFG_NO_FLASH	1
-#endif	/* CFG_USE_NOR */
+#else	/* !CONFIG_SYS_USE_NOR */
+# define	CONFIG_SYS_NO_FLASH	1
+#endif	/* CONFIG_SYS_USE_NOR */
 
 /* OneNAND boot, OneNAND has CS0, NOR boot ONeNAND has CS2 */
-#define	CFG_ONENAND_BASE	0x00000000
-#define	CFG_ENV_IS_IN_ONENAND	1
-#define CFG_ENV_ADDR		0x00020000
+#define	CONFIG_SYS_ONENAND_BASE	0x00000000
+#define	CONFIG_ENV_IS_IN_ONENAND	1
+#define CONFIG_ENV_ADDR		0x00020000
+
+#ifdef CONFIG_SYS_USE_UBI
+#define CONFIG_JFFS2_CMDLINE
+#define MTDIDS_DEFAULT		"onenand0=onenand"
+#define MTDPARTS_DEFAULT	"mtdparts=onenand:128k(bootloader),"	\
+					"128k(params),"			\
+					"2m(kernel),"			\
+					"16m(rootfs),"			\
+					"32m(fs),"			\
+					"-(ubifs)"
+#endif
 
 #endif /* __CONFIG_H */
diff --git a/include/configs/armadillo.h b/include/configs/armadillo.h
index 98a83db29..5a4ceaf69 100644
--- a/include/configs/armadillo.h
+++ b/include/configs/armadillo.h
@@ -50,8 +50,8 @@
 /*
  * Size of malloc() pool
  */
-#define CFG_MALLOC_LEN		(CFG_ENV_SIZE + 128*1024)
-#define CFG_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
+#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + 128*1024)
+#define CONFIG_SYS_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
 
 /*
  * Hardware drivers
@@ -95,24 +95,24 @@
 /*
  * Miscellaneous configurable options
  */
-#define	CFG_LONGHELP				/* undef to save memory		*/
-#define	CFG_PROMPT		"ARMADILLO # "	/* Monitor Command Prompt	*/
-#define	CFG_CBSIZE		256		/* Console I/O Buffer Size	*/
-#define	CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define	CFG_MAXARGS		16		/* max number of command args	*/
-#define CFG_BARGSIZE		CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+#define	CONFIG_SYS_LONGHELP				/* undef to save memory		*/
+#define	CONFIG_SYS_PROMPT		"ARMADILLO # "	/* Monitor Command Prompt	*/
+#define	CONFIG_SYS_CBSIZE		256		/* Console I/O Buffer Size	*/
+#define	CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define	CONFIG_SYS_MAXARGS		16		/* max number of command args	*/
+#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
 
-#define CFG_MEMTEST_START	0xc0400000	/* memtest works on	*/
-#define CFG_MEMTEST_END		0xc0800000	/* 4 ... 8 MB in DRAM	*/
+#define CONFIG_SYS_MEMTEST_START	0xc0400000	/* memtest works on	*/
+#define CONFIG_SYS_MEMTEST_END		0xc0800000	/* 4 ... 8 MB in DRAM	*/
 
-#undef  CFG_CLKS_IN_HZ		/* everything, incl board info, in Hz */
+#undef  CONFIG_SYS_CLKS_IN_HZ		/* everything, incl board info, in Hz */
 
-#define	CFG_LOAD_ADDR		0x00040000	/* default load address	for armadillo: kernel img is here*/
+#define	CONFIG_SYS_LOAD_ADDR		0x00040000	/* default load address	for armadillo: kernel img is here*/
 
-#define	CFG_HZ			2000		/* decrementer freq: 2 kHz */
+#define	CONFIG_SYS_HZ			2000		/* decrementer freq: 2 kHz */
 
 						/* valid baudrates */
-#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
 
 /*-----------------------------------------------------------------------
  * Stack sizes
@@ -135,21 +135,21 @@
 #define PHYS_FLASH_1		0x00000000 /* Flash Bank #1 */
 #define PHYS_FLASH_SIZE		0x00400000 /* 4 MB */
 
-#define CFG_FLASH_BASE		PHYS_FLASH_1
+#define CONFIG_SYS_FLASH_BASE		PHYS_FLASH_1
 
 /*-----------------------------------------------------------------------
  * FLASH and environment organization
  */
-#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
-#define CFG_MAX_FLASH_SECT	512	/* max number of sectors on one chip	*/
+#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
+#define CONFIG_SYS_MAX_FLASH_SECT	512	/* max number of sectors on one chip	*/
 
 /* timeout values are in ticks */
-#define CFG_FLASH_ERASE_TOUT	(2*CFG_HZ) /* Timeout for Flash Erase */
-#define CFG_FLASH_WRITE_TOUT	(2*CFG_HZ) /* Timeout for Flash Write */
+#define CONFIG_SYS_FLASH_ERASE_TOUT	(2*CONFIG_SYS_HZ) /* Timeout for Flash Erase */
+#define CONFIG_SYS_FLASH_WRITE_TOUT	(2*CONFIG_SYS_HZ) /* Timeout for Flash Write */
 
-#define	CFG_ENV_IS_IN_FLASH	1
-#define CFG_ENV_ADDR		(PHYS_FLASH_1 + 0x20000)	/* Addr of Environment Sector	*/
-#define CFG_ENV_SIZE		0x20000	/* Total Size of Environment Sector	*/
+#define	CONFIG_ENV_IS_IN_FLASH	1
+#define CONFIG_ENV_ADDR		(PHYS_FLASH_1 + 0x20000)	/* Addr of Environment Sector	*/
+#define CONFIG_ENV_SIZE		0x20000	/* Total Size of Environment Sector	*/
 
 #define CONFIG_CMDLINE_TAG
 #define CONFIG_SETUP_MEMORY_TAGS
diff --git a/include/configs/assabet.h b/include/configs/assabet.h
index ed7b5ef8f..024fa207e 100644
--- a/include/configs/assabet.h
+++ b/include/configs/assabet.h
@@ -45,8 +45,8 @@
 /*
  * Size of malloc() pool
  */
-#define CFG_MALLOC_LEN          (CFG_ENV_SIZE + 128*1024)
-#define CFG_GBL_DATA_SIZE       128	/* size rsrvd for initial data */
+#define CONFIG_SYS_MALLOC_LEN          (CONFIG_ENV_SIZE + 128*1024)
+#define CONFIG_SYS_GBL_DATA_SIZE       128	/* size rsrvd for initial data */
 
 /*
  * Hardware drivers
@@ -85,7 +85,7 @@
 #define CONFIG_BOOTDELAY	3
 #define CONFIG_BOOTARGS		"console=ttySA0,115200n8 root=/dev/nfs ip=bootp"
 #define CONFIG_BOOTCOMMAND	"bootp;tftp;bootm"
-#define CFG_AUTOLOAD            "n"	/* No autoload */
+#define CONFIG_SYS_AUTOLOAD            "n"	/* No autoload */
 
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	115200	/* speed to run kgdb serial port */
@@ -95,25 +95,25 @@
 /*
  * Miscellaneous configurable options
  */
-#define CFG_LONGHELP		/* undef to save memory         */
-#define CFG_PROMPT		"Intel Assabet # "	/* Monitor Command Prompt       */
-#define CFG_CBSIZE		256	/* Console I/O Buffer Size      */
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16)	/* Print Buffer Size */
-#define CFG_MAXARGS		16	/* max number of command args   */
-#define CFG_BARGSIZE		CFG_CBSIZE	/* Boot Argument Buffer Size    */
+#define CONFIG_SYS_LONGHELP		/* undef to save memory         */
+#define CONFIG_SYS_PROMPT		"Intel Assabet # "	/* Monitor Command Prompt       */
+#define CONFIG_SYS_CBSIZE		256	/* Console I/O Buffer Size      */
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)	/* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS		16	/* max number of command args   */
+#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size    */
 
-#define CFG_MEMTEST_START	0xc0400000	/* memtest works on     */
-#define CFG_MEMTEST_END		0xc0800000	/* 4 ... 8 MB in DRAM   */
+#define CONFIG_SYS_MEMTEST_START	0xc0400000	/* memtest works on     */
+#define CONFIG_SYS_MEMTEST_END		0xc0800000	/* 4 ... 8 MB in DRAM   */
 
-#undef  CFG_CLKS_IN_HZ
+#undef  CONFIG_SYS_CLKS_IN_HZ
 
-#define CFG_LOAD_ADDR		0xc0000000	/* default load address */
+#define CONFIG_SYS_LOAD_ADDR		0xc0000000	/* default load address */
 
-#define CFG_HZ			3686400	/* incrementer freq: 3.6864 MHz */
-#define CFG_CPUSPEED		0x0a	/* set core clock to 206MHz */
+#define CONFIG_SYS_HZ			3686400	/* incrementer freq: 3.6864 MHz */
+#define CONFIG_SYS_CPUSPEED		0x0a	/* set core clock to 206MHz */
 
 						/* valid baudrates */
-#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
 
 /*-----------------------------------------------------------------------
  * Stack sizes
@@ -138,35 +138,35 @@
 #define PHYS_FLASH_BANK_SIZE    0x01000000	/* 16 MB Banks */
 #define PHYS_FLASH_SECT_SIZE    0x00040000	/* 256 KB sectors (x2) */
 
-#define CFG_MONITOR_BASE        TEXT_BASE
-#define CFG_MONITOR_LEN         (256 * 1024)	/* Reserve 256 KB for Monitor */
+#define CONFIG_SYS_MONITOR_BASE        TEXT_BASE
+#define CONFIG_SYS_MONITOR_LEN         (256 * 1024)	/* Reserve 256 KB for Monitor */
 
-#if CFG_MONITOR_BASE < CFG_FLASH_BASE
-#define CFG_RAMSTART
+#if CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE
+#define CONFIG_SYS_RAMSTART
 #endif
 
 /*-----------------------------------------------------------------------
  * FLASH and environment organization
  */
 
-#define CFG_FLASH_BASE		PHYS_FLASH_1
-#define CFG_FLASH_SIZE          PHYS_FLASH_SIZE
-#define CFG_FLASH_CFI           1	/* flash is CFI conformant      */
+#define CONFIG_SYS_FLASH_BASE		PHYS_FLASH_1
+#define CONFIG_SYS_FLASH_SIZE          PHYS_FLASH_SIZE
+#define CONFIG_SYS_FLASH_CFI           1	/* flash is CFI conformant      */
 #define CONFIG_FLASH_CFI_DRIVER    1	/* use common cfi driver        */
-#define CFG_FLASH_USE_BUFFER_WRITE 1	/* use buffered writes (20x faster) */
-#define CFG_MAX_FLASH_BANKS     1	/* max # of memory banks        */
-#define CFG_FLASH_INCREMENT     0	/* there is only one bank       */
-#define CFG_MAX_FLASH_SECT      128	/* max # of sectors on one chip */
-#undef CFG_FLASH_PROTECTION
-#define CFG_FLASH_BANKS_LIST    { CFG_FLASH_BASE }
-
-#define CFG_ENV_IS_IN_FLASH	1
-
-#if defined(CFG_ENV_IS_IN_FLASH)
-#define CFG_ENV_IN_OWN_SECTOR	1
-#define CFG_ENV_ADDR		(PHYS_FLASH_1 + PHYS_FLASH_SECT_SIZE)
-#define CFG_ENV_SIZE		PHYS_FLASH_SECT_SIZE
-#define CFG_ENV_SECT_SIZE	PHYS_FLASH_SECT_SIZE
+#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1	/* use buffered writes (20x faster) */
+#define CONFIG_SYS_MAX_FLASH_BANKS     1	/* max # of memory banks        */
+#define CONFIG_SYS_FLASH_INCREMENT     0	/* there is only one bank       */
+#define CONFIG_SYS_MAX_FLASH_SECT      128	/* max # of sectors on one chip */
+#undef CONFIG_SYS_FLASH_PROTECTION
+#define CONFIG_SYS_FLASH_BANKS_LIST    { CONFIG_SYS_FLASH_BASE }
+
+#define CONFIG_ENV_IS_IN_FLASH	1
+
+#if defined(CONFIG_ENV_IS_IN_FLASH)
+#define CONFIG_ENV_IN_OWN_SECTOR	1
+#define CONFIG_ENV_ADDR		(PHYS_FLASH_1 + PHYS_FLASH_SECT_SIZE)
+#define CONFIG_ENV_SIZE		PHYS_FLASH_SECT_SIZE
+#define CONFIG_ENV_SECT_SIZE	PHYS_FLASH_SECT_SIZE
 #endif
 
 #endif /* __CONFIG_H */
diff --git a/include/configs/at91cap9adk.h b/include/configs/at91cap9adk.h
index 520c67685..b2baf1b34 100644
--- a/include/configs/at91cap9adk.h
+++ b/include/configs/at91cap9adk.h
@@ -29,9 +29,11 @@
 
 /* ARM asynchronous clock */
 #define AT91_CPU_NAME		"AT91CAP9"
-#define AT91_MAIN_CLOCK		200000000	/* from 12 MHz crystal */
-#define AT91_MASTER_CLOCK	100000000	/* peripheral = main / 2 */
-#define CFG_HZ			1000000		/* 1us resolution */
+#define AT91_MAIN_CLOCK		12000000	/* 12 MHz crystal */
+#define AT91_MASTER_CLOCK	100000000	/* peripheral */
+#define AT91_CPU_CLOCK		200000000	/* cpu */
+#define CONFIG_SYS_AT91_PLLB	0x10073e01	/* PLLB settings for USB */
+#define CONFIG_SYS_HZ		1000000		/* 1us resolution */
 
 #define AT91_SLOW_CLOCK		32768	/* slow clock */
 
@@ -63,10 +65,10 @@
 #undef LCD_TEST_PATTERN
 #define CONFIG_LCD_INFO			1
 #define CONFIG_LCD_INFO_BELOW_LOGO	1
-#define CFG_WHITE_ON_BLACK		1
+#define CONFIG_SYS_WHITE_ON_BLACK		1
 #define CONFIG_ATMEL_LCD		1
 #define CONFIG_ATMEL_LCD_BGR555		1
-#define CFG_CONSOLE_IS_IN_ENV		1
+#define CONFIG_SYS_CONSOLE_IS_IN_ENV		1
 
 #define CONFIG_BOOTDELAY	3
 
@@ -100,26 +102,26 @@
 
 /* DataFlash */
 #define CONFIG_HAS_DATAFLASH		1
-#define CFG_SPI_WRITE_TOUT		(5*CFG_HZ)
-#define CFG_MAX_DATAFLASH_BANKS		1
-#define CFG_DATAFLASH_LOGIC_ADDR_CS0	0xC0000000	/* CS0 */
+#define CONFIG_SYS_SPI_WRITE_TOUT		(5*CONFIG_SYS_HZ)
+#define CONFIG_SYS_MAX_DATAFLASH_BANKS		1
+#define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0	0xC0000000	/* CS0 */
 #define AT91_SPI_CLK			15000000
 #define DATAFLASH_TCSS			(0x1a << 16)
 #define DATAFLASH_TCHS			(0x1 << 24)
 
 /* NOR flash */
-#define CFG_FLASH_CFI			1
+#define CONFIG_SYS_FLASH_CFI			1
 #define CONFIG_FLASH_CFI_DRIVER		1
 #define PHYS_FLASH_1			0x10000000
-#define CFG_FLASH_BASE			PHYS_FLASH_1
-#define CFG_MAX_FLASH_SECT		256
-#define CFG_MAX_FLASH_BANKS		1
+#define CONFIG_SYS_FLASH_BASE			PHYS_FLASH_1
+#define CONFIG_SYS_MAX_FLASH_SECT		256
+#define CONFIG_SYS_MAX_FLASH_BANKS		1
 
 /* NAND flash */
 #define NAND_MAX_CHIPS			1
-#define CFG_MAX_NAND_DEVICE		1
-#define CFG_NAND_BASE			0x40000000
-#define CFG_NAND_DBW_8			1
+#define CONFIG_SYS_MAX_NAND_DEVICE		1
+#define CONFIG_SYS_NAND_BASE			0x40000000
+#define CONFIG_SYS_NAND_DBW_8			1
 
 /* Ethernet */
 #define CONFIG_MACB			1
@@ -132,27 +134,29 @@
 #define CONFIG_USB_OHCI_NEW		1
 #define LITTLEENDIAN			1
 #define CONFIG_DOS_PARTITION		1
-#define CFG_USB_OHCI_CPU_INIT		1
-#define CFG_USB_OHCI_REGS_BASE		0x00700000	/* AT91_BASE_UHP */
-#define CFG_USB_OHCI_SLOT_NAME		"at91cap9"
-#define CFG_USB_OHCI_MAX_ROOT_PORTS	2
+#define CONFIG_SYS_USB_OHCI_CPU_INIT		1
+#define CONFIG_SYS_USB_OHCI_REGS_BASE		0x00700000	/* AT91_BASE_UHP */
+#define CONFIG_SYS_USB_OHCI_SLOT_NAME		"at91cap9"
+#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS	2
+#define CONFIG_USB_STORAGE		1
+#define CONFIG_CMD_FAT			1
 
-#define CFG_LOAD_ADDR			0x72000000	/* load address */
+#define CONFIG_SYS_LOAD_ADDR			0x72000000	/* load address */
 
-#define CFG_MEMTEST_START		PHYS_SDRAM
-#define CFG_MEMTEST_END			0x73e00000
+#define CONFIG_SYS_MEMTEST_START		PHYS_SDRAM
+#define CONFIG_SYS_MEMTEST_END			0x73e00000
 
-#define CFG_USE_DATAFLASH		1
-#undef CFG_USE_NORFLASH
+#define CONFIG_SYS_USE_DATAFLASH		1
+#undef CONFIG_SYS_USE_NORFLASH
 
-#ifdef CFG_USE_DATAFLASH
+#ifdef CONFIG_SYS_USE_DATAFLASH
 
 /* bootstrap + u-boot + env + linux in dataflash */
-#define CFG_ENV_IS_IN_DATAFLASH	1
-#define CFG_MONITOR_BASE	(CFG_DATAFLASH_LOGIC_ADDR_CS0 + 0x8400)
-#define CFG_ENV_OFFSET		0x4200
-#define CFG_ENV_ADDR		(CFG_DATAFLASH_LOGIC_ADDR_CS0 + CFG_ENV_OFFSET)
-#define CFG_ENV_SIZE		0x4200
+#define CONFIG_ENV_IS_IN_DATAFLASH	1
+#define CONFIG_SYS_MONITOR_BASE	(CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 + 0x8400)
+#define CONFIG_ENV_OFFSET		0x4200
+#define CONFIG_ENV_ADDR		(CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 + CONFIG_ENV_OFFSET)
+#define CONFIG_ENV_SIZE		0x4200
 #define CONFIG_BOOTCOMMAND	"cp.b 0xC0042000 0x72000000 0x210000; bootm"
 #define CONFIG_BOOTARGS		"console=ttyS0,115200 "			\
 				"root=/dev/mtdblock1 "			\
@@ -163,11 +167,11 @@
 #else
 
 /* bootstrap + u-boot + env + linux in norflash */
-#define CFG_ENV_IS_IN_FLASH	1
-#define CFG_MONITOR_BASE	(PHYS_FLASH_1 + 0x8000)
-#define CFG_ENV_OFFSET		0x4000
-#define CFG_ENV_ADDR		(PHYS_FLASH_1 + CFG_ENV_OFFSET)
-#define CFG_ENV_SIZE		0x4000
+#define CONFIG_ENV_IS_IN_FLASH	1
+#define CONFIG_SYS_MONITOR_BASE	(PHYS_FLASH_1 + 0x8000)
+#define CONFIG_ENV_OFFSET		0x4000
+#define CONFIG_ENV_ADDR		(PHYS_FLASH_1 + CONFIG_ENV_OFFSET)
+#define CONFIG_ENV_SIZE		0x4000
 #define CONFIG_BOOTCOMMAND	"cp.b 0x10040000 0x72000000 0x200000; bootm"
 #define CONFIG_BOOTARGS		"console=ttyS0,115200 "			\
 				"root=/dev/mtdblock4 "			\
@@ -179,21 +183,21 @@
 #endif
 
 #define CONFIG_BAUDRATE		115200
-#define CFG_BAUDRATE_TABLE	{115200 , 19200, 38400, 57600, 9600 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{115200 , 19200, 38400, 57600, 9600 }
 
-#define CFG_PROMPT		"U-Boot> "
-#define CFG_CBSIZE		256
-#define CFG_MAXARGS		16
-#define CFG_PBSIZE		(CFG_CBSIZE + sizeof(CFG_PROMPT) + 16)
-#define CFG_LONGHELP		1
+#define CONFIG_SYS_PROMPT		"U-Boot> "
+#define CONFIG_SYS_CBSIZE		256
+#define CONFIG_SYS_MAXARGS		16
+#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
+#define CONFIG_SYS_LONGHELP		1
 #define CONFIG_CMDLINE_EDITING	1
 
 #define ROUND(A, B)		(((A) + (B)) & ~((B) - 1))
 /*
  * Size of malloc() pool
  */
-#define CFG_MALLOC_LEN		ROUND(CFG_ENV_SIZE + 128*1024, 0x1000)
-#define CFG_GBL_DATA_SIZE	128	/* 128 bytes for initial data */
+#define CONFIG_SYS_MALLOC_LEN		ROUND(CONFIG_ENV_SIZE + 128*1024, 0x1000)
+#define CONFIG_SYS_GBL_DATA_SIZE	128	/* 128 bytes for initial data */
 
 #define CONFIG_STACKSIZE	(32*1024)	/* regular stack */
 
diff --git a/include/configs/at91rm9200dk.h b/include/configs/at91rm9200dk.h
index fca431e3b..746f0ef10 100644
--- a/include/configs/at91rm9200dk.h
+++ b/include/configs/at91rm9200dk.h
@@ -1,7 +1,7 @@
 /*
  * Rick Bronson <rick@efn.org>
  *
- * Configuation settings for the AT91RM9200DK board.
+ * Configuration settings for the AT91RM9200DK board.
  *
  * See file CREDITS for list of people who contributed to this
  * project.
@@ -43,7 +43,7 @@
 #define CONFIG_INITRD_TAG	1
 
 #ifndef CONFIG_SKIP_LOWLEVEL_INIT
-#define CFG_USE_MAIN_OSCILLATOR		1
+#define CONFIG_SYS_USE_MAIN_OSCILLATOR		1
 /* flash */
 #define MC_PUIA_VAL	0x00000000
 #define MC_PUP_VAL	0x00000000
@@ -72,12 +72,14 @@
 #define SDRC_MR_VAL2	0x00000003 /* Load Mode Register */
 #define SDRC_MR_VAL3	0x00000000 /* Normal Mode */
 #define SDRC_TR_VAL	0x000002E0 /* Write refresh rate */
+#else
+#define CONFIG_SKIP_RELOCATE_UBOOT
 #endif	/* CONFIG_SKIP_LOWLEVEL_INIT */
 /*
  * Size of malloc() pool
  */
-#define CFG_MALLOC_LEN	(CFG_ENV_SIZE + 128*1024)
-#define CFG_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
+#define CONFIG_SYS_MALLOC_LEN	(CONFIG_ENV_SIZE + 128*1024)
+#define CONFIG_SYS_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
 
 #define CONFIG_BAUDRATE 115200
 
@@ -118,7 +120,7 @@
 
 #define CONFIG_NAND_LEGACY
 
-#define CFG_MAX_NAND_DEVICE	1	/* Max number of NAND devices		*/
+#define CONFIG_SYS_MAX_NAND_DEVICE	1	/* Max number of NAND devices		*/
 #define SECTORSIZE 512
 
 #define ADDR_COLUMN 1
@@ -152,8 +154,8 @@
 #define PHYS_SDRAM 0x20000000
 #define PHYS_SDRAM_SIZE 0x2000000  /* 32 megs */
 
-#define CFG_MEMTEST_START		PHYS_SDRAM
-#define CFG_MEMTEST_END			CFG_MEMTEST_START + PHYS_SDRAM_SIZE - 262144
+#define CONFIG_SYS_MEMTEST_START		PHYS_SDRAM
+#define CONFIG_SYS_MEMTEST_END			CONFIG_SYS_MEMTEST_START + PHYS_SDRAM_SIZE - 262144
 
 #define CONFIG_DRIVER_ETHER
 #define CONFIG_NET_RETRY_COUNT		20
@@ -165,59 +167,59 @@
 #define DATAFLASH_TCHS	(0x1 << 24)
 
 #define CONFIG_HAS_DATAFLASH		1
-#define CFG_SPI_WRITE_TOUT		(5*CFG_HZ)
-#define CFG_MAX_DATAFLASH_BANKS		2
-#define CFG_MAX_DATAFLASH_PAGES		16384
-#define CFG_DATAFLASH_LOGIC_ADDR_CS0	0xC0000000	/* Logical adress for CS0 */
-#define CFG_DATAFLASH_LOGIC_ADDR_CS3	0xD0000000	/* Logical adress for CS3 */
+#define CONFIG_SYS_SPI_WRITE_TOUT		(5*CONFIG_SYS_HZ)
+#define CONFIG_SYS_MAX_DATAFLASH_BANKS		2
+#define CONFIG_SYS_MAX_DATAFLASH_PAGES		16384
+#define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0	0xC0000000	/* Logical adress for CS0 */
+#define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS3	0xD0000000	/* Logical adress for CS3 */
 
 #define PHYS_FLASH_1			0x10000000
 #define PHYS_FLASH_SIZE			0x200000  /* 2 megs main flash */
-#define CFG_FLASH_BASE			PHYS_FLASH_1
-#define CFG_MAX_FLASH_BANKS		1
-#define CFG_MAX_FLASH_SECT		256
-#define CFG_FLASH_ERASE_TOUT		(2*CFG_HZ) /* Timeout for Flash Erase */
-#define CFG_FLASH_WRITE_TOUT		(2*CFG_HZ) /* Timeout for Flash Write */
-
-#undef	CFG_ENV_IS_IN_DATAFLASH
-
-#ifdef CFG_ENV_IS_IN_DATAFLASH
-#define CFG_ENV_OFFSET			0x20000
-#define CFG_ENV_ADDR			(CFG_DATAFLASH_LOGIC_ADDR_CS0 + CFG_ENV_OFFSET)
-#define CFG_ENV_SIZE			0x2000  /* 0x8000 */
+#define CONFIG_SYS_FLASH_BASE			PHYS_FLASH_1
+#define CONFIG_SYS_MAX_FLASH_BANKS		1
+#define CONFIG_SYS_MAX_FLASH_SECT		256
+#define CONFIG_SYS_FLASH_ERASE_TOUT		(2*CONFIG_SYS_HZ) /* Timeout for Flash Erase */
+#define CONFIG_SYS_FLASH_WRITE_TOUT		(2*CONFIG_SYS_HZ) /* Timeout for Flash Write */
+
+#undef	CONFIG_ENV_IS_IN_DATAFLASH
+
+#ifdef CONFIG_ENV_IS_IN_DATAFLASH
+#define CONFIG_ENV_OFFSET			0x20000
+#define CONFIG_ENV_ADDR			(CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 + CONFIG_ENV_OFFSET)
+#define CONFIG_ENV_SIZE			0x2000  /* 0x8000 */
 #else
-#define CFG_ENV_IS_IN_FLASH		1
+#define CONFIG_ENV_IS_IN_FLASH		1
 #ifdef CONFIG_SKIP_LOWLEVEL_INIT
-#define CFG_ENV_ADDR			(PHYS_FLASH_1 + 0xe000)  /* between boot.bin and u-boot.bin.gz */
-#define CFG_ENV_SIZE			0x2000  /* 0x8000 */
+#define CONFIG_ENV_ADDR			(PHYS_FLASH_1 + 0xe000)  /* between boot.bin and u-boot.bin.gz */
+#define CONFIG_ENV_SIZE			0x2000  /* 0x8000 */
 #else
-#define CFG_ENV_ADDR			(PHYS_FLASH_1 + 0x60000)  /* after u-boot.bin */
-#define CFG_ENV_SIZE			0x10000 /* sectors are 64K here */
+#define CONFIG_ENV_ADDR			(PHYS_FLASH_1 + 0x60000)  /* after u-boot.bin */
+#define CONFIG_ENV_SIZE			0x10000 /* sectors are 64K here */
 #endif	/* CONFIG_SKIP_LOWLEVEL_INIT */
-#endif	/* CFG_ENV_IS_IN_DATAFLASH */
+#endif	/* CONFIG_ENV_IS_IN_DATAFLASH */
 
 
-#define CFG_LOAD_ADDR		0x21000000  /* default load address */
+#define CONFIG_SYS_LOAD_ADDR		0x21000000  /* default load address */
 
 #ifdef CONFIG_SKIP_LOWLEVEL_INIT
-#define CFG_BOOT_SIZE		0x6000 /* 24 KBytes */
-#define CFG_U_BOOT_BASE		(PHYS_FLASH_1 + 0x10000)
-#define CFG_U_BOOT_SIZE		0x10000 /* 64 KBytes */
+#define CONFIG_SYS_BOOT_SIZE		0x6000 /* 24 KBytes */
+#define CONFIG_SYS_U_BOOT_BASE		(PHYS_FLASH_1 + 0x10000)
+#define CONFIG_SYS_U_BOOT_SIZE		0x10000 /* 64 KBytes */
 #else
-#define CFG_BOOT_SIZE		0x00 /* 0 KBytes */
-#define CFG_U_BOOT_BASE		PHYS_FLASH_1
-#define CFG_U_BOOT_SIZE		0x60000 /* 384 KBytes */
+#define CONFIG_SYS_BOOT_SIZE		0x00 /* 0 KBytes */
+#define CONFIG_SYS_U_BOOT_BASE		PHYS_FLASH_1
+#define CONFIG_SYS_U_BOOT_SIZE		0x60000 /* 384 KBytes */
 #endif	/* CONFIG_SKIP_LOWLEVEL_INIT */
 
-#define CFG_BAUDRATE_TABLE	{ 115200, 19200, 38400, 57600, 9600 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 115200, 19200, 38400, 57600, 9600 }
 
-#define CFG_PROMPT		"U-Boot> "	/* Monitor Command Prompt */
-#define CFG_CBSIZE		256		/* Console I/O Buffer Size */
-#define CFG_MAXARGS		16		/* max number of command args */
-#define CFG_PBSIZE		(CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define CONFIG_SYS_PROMPT		"U-Boot> "	/* Monitor Command Prompt */
+#define CONFIG_SYS_CBSIZE		256		/* Console I/O Buffer Size */
+#define CONFIG_SYS_MAXARGS		16		/* max number of command args */
+#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
 
-#define CFG_HZ 1000
-#define CFG_HZ_CLOCK AT91C_MASTER_CLOCK/2	/* AT91C_TC0_CMR is implicitly set to */
+#define CONFIG_SYS_HZ 1000
+#define CONFIG_SYS_HZ_CLOCK AT91C_MASTER_CLOCK/2	/* AT91C_TC0_CMR is implicitly set to */
 						/* AT91C_TC_TIMER_DIV1_CLOCK */
 
 #define CONFIG_STACKSIZE	(32*1024)	/* regular stack */
diff --git a/include/configs/at91sam9260ek.h b/include/configs/at91sam9260ek.h
index 675224e0b..15389296f 100644
--- a/include/configs/at91sam9260ek.h
+++ b/include/configs/at91sam9260ek.h
@@ -28,9 +28,12 @@
 #define __CONFIG_H
 
 /* ARM asynchronous clock */
-#define AT91_MAIN_CLOCK		198656000	/* from 18.432 MHz crystal */
-#define AT91_MASTER_CLOCK	99328000	/* peripheral = main / 2 */
-#define CFG_HZ			1000000		/* 1us resolution */
+#define AT91_CPU_NAME		"AT91SAM9260"
+#define AT91_MAIN_CLOCK		18432000	/* 18.432 MHz crystal */
+#define AT91_MASTER_CLOCK	100000000	/* peripheral */
+#define AT91_CPU_CLOCK		200000000	/* cpu */
+#define CONFIG_SYS_AT91_PLLB	0x107c3e18	/* PLLB settings for USB */
+#define CONFIG_SYS_HZ		1000000		/* 1us resolution */
 
 #define AT91_SLOW_CLOCK		32768	/* slow clock */
 
@@ -88,22 +91,22 @@
 
 /* DataFlash */
 #define CONFIG_HAS_DATAFLASH		1
-#define CFG_SPI_WRITE_TOUT		(5*CFG_HZ)
-#define CFG_MAX_DATAFLASH_BANKS		2
-#define CFG_DATAFLASH_LOGIC_ADDR_CS0	0xC0000000	/* CS0 */
-#define CFG_DATAFLASH_LOGIC_ADDR_CS1	0xD0000000	/* CS1 */
+#define CONFIG_SYS_SPI_WRITE_TOUT		(5*CONFIG_SYS_HZ)
+#define CONFIG_SYS_MAX_DATAFLASH_BANKS		2
+#define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0	0xC0000000	/* CS0 */
+#define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS1	0xD0000000	/* CS1 */
 #define AT91_SPI_CLK			15000000
 #define DATAFLASH_TCSS			(0x1a << 16)
 #define DATAFLASH_TCHS			(0x1 << 24)
 
 /* NAND flash */
 #define NAND_MAX_CHIPS			1
-#define CFG_MAX_NAND_DEVICE		1
-#define CFG_NAND_BASE			0x40000000
-#define CFG_NAND_DBW_8			1
+#define CONFIG_SYS_MAX_NAND_DEVICE		1
+#define CONFIG_SYS_NAND_BASE			0x40000000
+#define CONFIG_SYS_NAND_DBW_8			1
 
 /* NOR flash - no real flash on this board */
-#define CFG_NO_FLASH			1
+#define CONFIG_SYS_NO_FLASH			1
 
 /* Ethernet */
 #define CONFIG_MACB			1
@@ -116,56 +119,53 @@
 #define CONFIG_USB_OHCI_NEW		1
 #define LITTLEENDIAN			1
 #define CONFIG_DOS_PARTITION		1
-#define CFG_USB_OHCI_CPU_INIT		1
-#define CFG_USB_OHCI_REGS_BASE		0x00500000	/* AT91SAM9260_UHP_BASE */
-#define CFG_USB_OHCI_SLOT_NAME		"at91sam9260"
-#define CFG_USB_OHCI_MAX_ROOT_PORTS	2
+#define CONFIG_SYS_USB_OHCI_CPU_INIT		1
+#define CONFIG_SYS_USB_OHCI_REGS_BASE		0x00500000	/* AT91SAM9260_UHP_BASE */
+#define CONFIG_SYS_USB_OHCI_SLOT_NAME		"at91sam9260"
+#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS	2
 #define CONFIG_USB_STORAGE		1
+#define CONFIG_CMD_FAT			1
 
-#define CFG_LOAD_ADDR			0x22000000	/* load address */
+#define CONFIG_SYS_LOAD_ADDR			0x22000000	/* load address */
 
-#define CFG_MEMTEST_START		PHYS_SDRAM
-#define CFG_MEMTEST_END			0x23e00000
+#define CONFIG_SYS_MEMTEST_START		PHYS_SDRAM
+#define CONFIG_SYS_MEMTEST_END			0x23e00000
 
-#undef CFG_USE_DATAFLASH_CS0
-#define CFG_USE_DATAFLASH_CS1		1
-#undef CFG_USE_NANDFLASH
-
-#ifdef CFG_USE_DATAFLASH_CS0
+#ifdef CONFIG_SYS_USE_DATAFLASH_CS0
 
 /* bootstrap + u-boot + env + linux in dataflash on CS0 */
-#define CFG_ENV_IS_IN_DATAFLASH	1
-#define CFG_MONITOR_BASE	(CFG_DATAFLASH_LOGIC_ADDR_CS0 + 0x8400)
-#define CFG_ENV_OFFSET		0x4200
-#define CFG_ENV_ADDR		(CFG_DATAFLASH_LOGIC_ADDR_CS0 + CFG_ENV_OFFSET)
-#define CFG_ENV_SIZE		0x4200
+#define CONFIG_ENV_IS_IN_DATAFLASH	1
+#define CONFIG_SYS_MONITOR_BASE	(CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 + 0x8400)
+#define CONFIG_ENV_OFFSET		0x4200
+#define CONFIG_ENV_ADDR		(CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 + CONFIG_ENV_OFFSET)
+#define CONFIG_ENV_SIZE		0x4200
 #define CONFIG_BOOTCOMMAND	"cp.b 0xC0042000 0x22000000 0x210000; bootm"
 #define CONFIG_BOOTARGS		"console=ttyS0,115200 "			\
 				"root=/dev/mtdblock0 "			\
 				"mtdparts=at91_nand:-(root) "		\
 				"rw rootfstype=jffs2"
 
-#elif CFG_USE_DATAFLASH_CS1
+#elif CONFIG_SYS_USE_DATAFLASH_CS1
 
 /* bootstrap + u-boot + env + linux in dataflash on CS1 */
-#define CFG_ENV_IS_IN_DATAFLASH	1
-#define CFG_MONITOR_BASE	(CFG_DATAFLASH_LOGIC_ADDR_CS1 + 0x8400)
-#define CFG_ENV_OFFSET		0x4200
-#define CFG_ENV_ADDR		(CFG_DATAFLASH_LOGIC_ADDR_CS1 + CFG_ENV_OFFSET)
-#define CFG_ENV_SIZE		0x4200
+#define CONFIG_ENV_IS_IN_DATAFLASH	1
+#define CONFIG_SYS_MONITOR_BASE	(CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS1 + 0x8400)
+#define CONFIG_ENV_OFFSET		0x4200
+#define CONFIG_ENV_ADDR		(CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS1 + CONFIG_ENV_OFFSET)
+#define CONFIG_ENV_SIZE		0x4200
 #define CONFIG_BOOTCOMMAND	"cp.b 0xD0042000 0x22000000 0x210000; bootm"
 #define CONFIG_BOOTARGS		"console=ttyS0,115200 "			\
 				"root=/dev/mtdblock0 "			\
 				"mtdparts=at91_nand:-(root) "		\
 				"rw rootfstype=jffs2"
 
-#else /* CFG_USE_NANDFLASH */
+#else /* CONFIG_SYS_USE_NANDFLASH */
 
 /* bootstrap + u-boot + env + linux in nandflash */
-#define CFG_ENV_IS_IN_NAND	1
-#define CFG_ENV_OFFSET		0x60000
-#define CFG_ENV_OFFSET_REDUND	0x80000
-#define CFG_ENV_SIZE		0x20000		/* 1 sector = 128 kB */
+#define CONFIG_ENV_IS_IN_NAND	1
+#define CONFIG_ENV_OFFSET		0x60000
+#define CONFIG_ENV_OFFSET_REDUND	0x80000
+#define CONFIG_ENV_SIZE		0x20000		/* 1 sector = 128 kB */
 #define CONFIG_BOOTCOMMAND	"nand read 0x22000000 0xA0000 0x200000; bootm"
 #define CONFIG_BOOTARGS		"console=ttyS0,115200 "			\
 				"root=/dev/mtdblock5 "			\
@@ -177,21 +177,21 @@
 #endif
 
 #define CONFIG_BAUDRATE		115200
-#define CFG_BAUDRATE_TABLE	{115200 , 19200, 38400, 57600, 9600 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{115200 , 19200, 38400, 57600, 9600 }
 
-#define CFG_PROMPT		"U-Boot> "
-#define CFG_CBSIZE		256
-#define CFG_MAXARGS		16
-#define CFG_PBSIZE		(CFG_CBSIZE + sizeof(CFG_PROMPT) + 16)
-#define CFG_LONGHELP		1
+#define CONFIG_SYS_PROMPT		"U-Boot> "
+#define CONFIG_SYS_CBSIZE		256
+#define CONFIG_SYS_MAXARGS		16
+#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
+#define CONFIG_SYS_LONGHELP		1
 #define CONFIG_CMDLINE_EDITING	1
 
 #define ROUND(A, B)		(((A) + (B)) & ~((B) - 1))
 /*
  * Size of malloc() pool
  */
-#define CFG_MALLOC_LEN		ROUND(3 * CFG_ENV_SIZE + 128*1024, 0x1000)
-#define CFG_GBL_DATA_SIZE	128	/* 128 bytes for initial data */
+#define CONFIG_SYS_MALLOC_LEN		ROUND(3 * CONFIG_ENV_SIZE + 128*1024, 0x1000)
+#define CONFIG_SYS_GBL_DATA_SIZE	128	/* 128 bytes for initial data */
 
 #define CONFIG_STACKSIZE	(32*1024)	/* regular stack */
 
diff --git a/include/configs/at91sam9261ek.h b/include/configs/at91sam9261ek.h
index e53a23f33..0016b4fbf 100644
--- a/include/configs/at91sam9261ek.h
+++ b/include/configs/at91sam9261ek.h
@@ -29,9 +29,10 @@
 
 /* ARM asynchronous clock */
 #define AT91_CPU_NAME		"AT91SAM9261"
-#define AT91_MAIN_CLOCK		198656000	/* from 18.432 MHz crystal */
-#define AT91_MASTER_CLOCK	99328000	/* peripheral = main / 2 */
-#define CFG_HZ			1000000		/* 1us resolution */
+#define AT91_MAIN_CLOCK		18432000	/* 18.432 MHz crystal */
+#define AT91_MASTER_CLOCK	100000000	/* peripheral */
+#define AT91_CPU_CLOCK		200000000	/* cpu */
+#define CONFIG_SYS_HZ		1000000		/* 1us resolution */
 
 #define AT91_SLOW_CLOCK		32768	/* slow clock */
 
@@ -63,10 +64,10 @@
 #undef LCD_TEST_PATTERN
 #define CONFIG_LCD_INFO			1
 #define CONFIG_LCD_INFO_BELOW_LOGO	1
-#define CFG_WHITE_ON_BLACK		1
+#define CONFIG_SYS_WHITE_ON_BLACK		1
 #define CONFIG_ATMEL_LCD		1
 #define CONFIG_ATMEL_LCD_BGR555		1
-#define CFG_CONSOLE_IS_IN_ENV		1
+#define CONFIG_SYS_CONSOLE_IS_IN_ENV		1
 
 #define CONFIG_BOOTDELAY	3
 
@@ -101,22 +102,22 @@
 
 /* DataFlash */
 #define CONFIG_HAS_DATAFLASH		1
-#define CFG_SPI_WRITE_TOUT		(5*CFG_HZ)
-#define CFG_MAX_DATAFLASH_BANKS		2
-#define CFG_DATAFLASH_LOGIC_ADDR_CS0	0xC0000000	/* CS0 */
-#define CFG_DATAFLASH_LOGIC_ADDR_CS3	0xD0000000	/* CS3 */
+#define CONFIG_SYS_SPI_WRITE_TOUT		(5*CONFIG_SYS_HZ)
+#define CONFIG_SYS_MAX_DATAFLASH_BANKS		2
+#define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0	0xC0000000	/* CS0 */
+#define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS3	0xD0000000	/* CS3 */
 #define AT91_SPI_CLK			15000000
 #define DATAFLASH_TCSS			(0x1a << 16)
 #define DATAFLASH_TCHS			(0x1 << 24)
 
 /* NAND flash */
 #define NAND_MAX_CHIPS			1
-#define CFG_MAX_NAND_DEVICE		1
-#define CFG_NAND_BASE			0x40000000
-#define CFG_NAND_DBW_8			1
+#define CONFIG_SYS_MAX_NAND_DEVICE		1
+#define CONFIG_SYS_NAND_BASE			0x40000000
+#define CONFIG_SYS_NAND_DBW_8			1
 
 /* NOR flash - no real flash on this board */
-#define CFG_NO_FLASH			1
+#define CONFIG_SYS_NO_FLASH			1
 
 /* Ethernet */
 #define CONFIG_DRIVER_DM9000		1
@@ -131,41 +132,53 @@
 #define CONFIG_USB_OHCI_NEW		1
 #define LITTLEENDIAN			1
 #define CONFIG_DOS_PARTITION		1
-#define CFG_USB_OHCI_CPU_INIT		1
-#define CFG_USB_OHCI_REGS_BASE		0x00500000	/* AT91SAM9261_UHP_BASE */
-#define CFG_USB_OHCI_SLOT_NAME		"at91sam9261"
-#define CFG_USB_OHCI_MAX_ROOT_PORTS	2
+#define CONFIG_SYS_USB_OHCI_CPU_INIT		1
+#define CONFIG_SYS_USB_OHCI_REGS_BASE		0x00500000	/* AT91SAM9261_UHP_BASE */
+#define CONFIG_SYS_USB_OHCI_SLOT_NAME		"at91sam9261"
+#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS	2
 #define CONFIG_USB_STORAGE		1
+#define CONFIG_CMD_FAT			1
 
-#define CFG_LOAD_ADDR			0x22000000	/* load address */
+#define CONFIG_SYS_LOAD_ADDR			0x22000000	/* load address */
 
-#define CFG_MEMTEST_START		PHYS_SDRAM
-#define CFG_MEMTEST_END			0x23e00000
+#define CONFIG_SYS_MEMTEST_START		PHYS_SDRAM
+#define CONFIG_SYS_MEMTEST_END			0x23e00000
 
-#define CFG_USE_DATAFLASH_CS0		1
-#undef CFG_USE_NANDFLASH
-
-#ifdef CFG_USE_DATAFLASH_CS0
+#ifdef CONFIG_SYS_USE_DATAFLASH_CS0
 
 /* bootstrap + u-boot + env + linux in dataflash on CS0 */
-#define CFG_ENV_IS_IN_DATAFLASH	1
-#define CFG_MONITOR_BASE	(CFG_DATAFLASH_LOGIC_ADDR_CS0 + 0x8400)
-#define CFG_ENV_OFFSET		0x4200
-#define CFG_ENV_ADDR		(CFG_DATAFLASH_LOGIC_ADDR_CS0 + CFG_ENV_OFFSET)
-#define CFG_ENV_SIZE		0x4200
+#define CONFIG_ENV_IS_IN_DATAFLASH	1
+#define CONFIG_SYS_MONITOR_BASE	(CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 + 0x8400)
+#define CONFIG_ENV_OFFSET	0x4200
+#define CONFIG_ENV_ADDR		(CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 + CONFIG_ENV_OFFSET)
+#define CONFIG_ENV_SIZE		0x4200
 #define CONFIG_BOOTCOMMAND	"cp.b 0xC0042000 0x22000000 0x210000; bootm"
 #define CONFIG_BOOTARGS		"console=ttyS0,115200 "			\
 				"root=/dev/mtdblock0 "			\
 				"mtdparts=at91_nand:-(root) "		\
 				"rw rootfstype=jffs2"
 
-#else /* CFG_USE_NANDFLASH */
+#elif CONFIG_SYS_USE_DATAFLASH_CS3
+
+/* bootstrap + u-boot + env + linux in dataflash on CS3 */
+#define CONFIG_ENV_IS_IN_DATAFLASH	1
+#define CONFIG_SYS_MONITOR_BASE	(CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS3 + 0x8400)
+#define CONFIG_ENV_OFFSET	0x4200
+#define CONFIG_ENV_ADDR		(CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS3 + CONFIG_ENV_OFFSET)
+#define CONFIG_ENV_SIZE		0x4200
+#define CONFIG_BOOTCOMMAND	"cp.b 0xD0042000 0x22000000 0x210000; bootm"
+#define CONFIG_BOOTARGS		"console=ttyS0,115200 "			\
+				"root=/dev/mtdblock0 "			\
+				"mtdparts=at91_nand:-(root) "		\
+				"rw rootfstype=jffs2"
+
+#else /* CONFIG_SYS_USE_NANDFLASH */
 
 /* bootstrap + u-boot + env + linux in nandflash */
-#define CFG_ENV_IS_IN_NAND	1
-#define CFG_ENV_OFFSET		0x60000
-#define CFG_ENV_OFFSET_REDUND	0x80000
-#define CFG_ENV_SIZE		0x20000		/* 1 sector = 128 kB */
+#define CONFIG_ENV_IS_IN_NAND	1
+#define CONFIG_ENV_OFFSET		0x60000
+#define CONFIG_ENV_OFFSET_REDUND	0x80000
+#define CONFIG_ENV_SIZE		0x20000		/* 1 sector = 128 kB */
 #define CONFIG_BOOTCOMMAND	"nand read 0x22000000 0xA0000 0x200000; bootm"
 #define CONFIG_BOOTARGS		"console=ttyS0,115200 "			\
 				"root=/dev/mtdblock5 "			\
@@ -177,21 +190,21 @@
 #endif
 
 #define CONFIG_BAUDRATE		115200
-#define CFG_BAUDRATE_TABLE	{115200 , 19200, 38400, 57600, 9600 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{115200 , 19200, 38400, 57600, 9600 }
 
-#define CFG_PROMPT		"U-Boot> "
-#define CFG_CBSIZE		256
-#define CFG_MAXARGS		16
-#define CFG_PBSIZE		(CFG_CBSIZE + sizeof(CFG_PROMPT) + 16)
-#define CFG_LONGHELP		1
+#define CONFIG_SYS_PROMPT		"U-Boot> "
+#define CONFIG_SYS_CBSIZE		256
+#define CONFIG_SYS_MAXARGS		16
+#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
+#define CONFIG_SYS_LONGHELP		1
 #define CONFIG_CMDLINE_EDITING	1
 
 #define ROUND(A, B)		(((A) + (B)) & ~((B) - 1))
 /*
  * Size of malloc() pool
  */
-#define CFG_MALLOC_LEN		ROUND(3 * CFG_ENV_SIZE + 128*1024, 0x1000)
-#define CFG_GBL_DATA_SIZE	128	/* 128 bytes for initial data */
+#define CONFIG_SYS_MALLOC_LEN		ROUND(3 * CONFIG_ENV_SIZE + 128*1024, 0x1000)
+#define CONFIG_SYS_GBL_DATA_SIZE	128	/* 128 bytes for initial data */
 
 #define CONFIG_STACKSIZE	(32*1024)	/* regular stack */
 
diff --git a/include/configs/at91sam9263ek.h b/include/configs/at91sam9263ek.h
index 5f90d39d5..d9ebc87ae 100644
--- a/include/configs/at91sam9263ek.h
+++ b/include/configs/at91sam9263ek.h
@@ -29,9 +29,11 @@
 
 /* ARM asynchronous clock */
 #define AT91_CPU_NAME		"AT91SAM9263"
-#define AT91_MAIN_CLOCK		199919000	/* from 16.367 MHz crystal */
-#define AT91_MASTER_CLOCK	99959500	/* peripheral = main / 2 */
-#define CFG_HZ			1000000		/* 1us resolution */
+#define AT91_MAIN_CLOCK		16367660	/* 16.367 MHz crystal */
+#define AT91_MASTER_CLOCK	100000000	/* peripheral */
+#define AT91_CPU_CLOCK		200000000	/* cpu */
+#define CONFIG_SYS_AT91_PLLB	0x133a3e8d	/* PLLB settings for USB */
+#define CONFIG_SYS_HZ		1000000		/* 1us resolution */
 
 #define AT91_SLOW_CLOCK		32768	/* slow clock */
 
@@ -63,10 +65,10 @@
 #undef LCD_TEST_PATTERN
 #define CONFIG_LCD_INFO			1
 #define CONFIG_LCD_INFO_BELOW_LOGO	1
-#define CFG_WHITE_ON_BLACK		1
+#define CONFIG_SYS_WHITE_ON_BLACK		1
 #define CONFIG_ATMEL_LCD		1
 #define CONFIG_ATMEL_LCD_BGR555		1
-#define CFG_CONSOLE_IS_IN_ENV		1
+#define CONFIG_SYS_CONSOLE_IS_IN_ENV		1
 
 #define CONFIG_BOOTDELAY	3
 
@@ -101,30 +103,30 @@
 
 /* DataFlash */
 #define CONFIG_HAS_DATAFLASH		1
-#define CFG_SPI_WRITE_TOUT		(5*CFG_HZ)
-#define CFG_MAX_DATAFLASH_BANKS		1
-#define CFG_DATAFLASH_LOGIC_ADDR_CS0	0xC0000000	/* CS0 */
+#define CONFIG_SYS_SPI_WRITE_TOUT		(5*CONFIG_SYS_HZ)
+#define CONFIG_SYS_MAX_DATAFLASH_BANKS		1
+#define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0	0xC0000000	/* CS0 */
 #define AT91_SPI_CLK			15000000
 #define DATAFLASH_TCSS			(0x1a << 16)
 #define DATAFLASH_TCHS			(0x1 << 24)
 
 /* NOR flash, if populated */
 #if 1
-#define CFG_NO_FLASH			1
+#define CONFIG_SYS_NO_FLASH			1
 #else
-#define CFG_FLASH_CFI			1
+#define CONFIG_SYS_FLASH_CFI			1
 #define CONFIG_FLASH_CFI_DRIVER		1
 #define PHYS_FLASH_1			0x10000000
-#define CFG_FLASH_BASE			PHYS_FLASH_1
-#define CFG_MAX_FLASH_SECT		256
-#define CFG_MAX_FLASH_BANKS		1
+#define CONFIG_SYS_FLASH_BASE			PHYS_FLASH_1
+#define CONFIG_SYS_MAX_FLASH_SECT		256
+#define CONFIG_SYS_MAX_FLASH_BANKS		1
 #endif
 
 /* NAND flash */
 #define NAND_MAX_CHIPS			1
-#define CFG_MAX_NAND_DEVICE		1
-#define CFG_NAND_BASE			0x40000000
-#define CFG_NAND_DBW_8			1
+#define CONFIG_SYS_MAX_NAND_DEVICE		1
+#define CONFIG_SYS_NAND_BASE			0x40000000
+#define CONFIG_SYS_NAND_DBW_8			1
 
 /* Ethernet */
 #define CONFIG_MACB			1
@@ -137,41 +139,39 @@
 #define CONFIG_USB_OHCI_NEW		1
 #define LITTLEENDIAN			1
 #define CONFIG_DOS_PARTITION		1
-#define CFG_USB_OHCI_CPU_INIT		1
-#define CFG_USB_OHCI_REGS_BASE		0x00a00000	/* AT91SAM9263_UHP_BASE */
-#define CFG_USB_OHCI_SLOT_NAME		"at91sam9263"
-#define CFG_USB_OHCI_MAX_ROOT_PORTS	2
+#define CONFIG_SYS_USB_OHCI_CPU_INIT		1
+#define CONFIG_SYS_USB_OHCI_REGS_BASE		0x00a00000	/* AT91SAM9263_UHP_BASE */
+#define CONFIG_SYS_USB_OHCI_SLOT_NAME		"at91sam9263"
+#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS	2
 #define CONFIG_USB_STORAGE		1
+#define CONFIG_CMD_FAT			1
 
-#define CFG_LOAD_ADDR			0x22000000	/* load address */
+#define CONFIG_SYS_LOAD_ADDR			0x22000000	/* load address */
 
-#define CFG_MEMTEST_START		PHYS_SDRAM
-#define CFG_MEMTEST_END			0x23e00000
+#define CONFIG_SYS_MEMTEST_START		PHYS_SDRAM
+#define CONFIG_SYS_MEMTEST_END			0x23e00000
 
-#define CFG_USE_DATAFLASH		1
-#undef CFG_USE_NANDFLASH
-
-#ifdef CFG_USE_DATAFLASH
+#ifdef CONFIG_SYS_USE_DATAFLASH
 
 /* bootstrap + u-boot + env + linux in dataflash on CS0 */
-#define CFG_ENV_IS_IN_DATAFLASH	1
-#define CFG_MONITOR_BASE	(CFG_DATAFLASH_LOGIC_ADDR_CS0 + 0x8400)
-#define CFG_ENV_OFFSET		0x4200
-#define CFG_ENV_ADDR		(CFG_DATAFLASH_LOGIC_ADDR_CS0 + CFG_ENV_OFFSET)
-#define CFG_ENV_SIZE		0x4200
+#define CONFIG_ENV_IS_IN_DATAFLASH	1
+#define CONFIG_SYS_MONITOR_BASE	(CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 + 0x8400)
+#define CONFIG_ENV_OFFSET		0x4200
+#define CONFIG_ENV_ADDR		(CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 + CONFIG_ENV_OFFSET)
+#define CONFIG_ENV_SIZE		0x4200
 #define CONFIG_BOOTCOMMAND	"cp.b 0xC0042000 0x22000000 0x210000; bootm"
 #define CONFIG_BOOTARGS		"console=ttyS0,115200 " \
 				"root=/dev/mtdblock0 " \
 				"mtdparts=at91_nand:-(root) "\
 				"rw rootfstype=jffs2"
 
-#else /* CFG_USE_NANDFLASH */
+#else /* CONFIG_SYS_USE_NANDFLASH */
 
 /* bootstrap + u-boot + env + linux in nandflash */
-#define CFG_ENV_IS_IN_NAND	1
-#define CFG_ENV_OFFSET		0x60000
-#define CFG_ENV_OFFSET_REDUND	0x80000
-#define CFG_ENV_SIZE		0x20000		/* 1 sector = 128 kB */
+#define CONFIG_ENV_IS_IN_NAND	1
+#define CONFIG_ENV_OFFSET		0x60000
+#define CONFIG_ENV_OFFSET_REDUND	0x80000
+#define CONFIG_ENV_SIZE		0x20000		/* 1 sector = 128 kB */
 #define CONFIG_BOOTCOMMAND	"nand read 0x22000000 0xA0000 0x200000; bootm"
 #define CONFIG_BOOTARGS		"console=ttyS0,115200 " \
 				"root=/dev/mtdblock5 " \
@@ -181,21 +181,21 @@
 #endif
 
 #define CONFIG_BAUDRATE		115200
-#define CFG_BAUDRATE_TABLE	{115200 , 19200, 38400, 57600, 9600 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{115200 , 19200, 38400, 57600, 9600 }
 
-#define CFG_PROMPT		"U-Boot> "
-#define CFG_CBSIZE		256
-#define CFG_MAXARGS		16
-#define CFG_PBSIZE		(CFG_CBSIZE + sizeof(CFG_PROMPT) + 16)
-#define CFG_LONGHELP		1
+#define CONFIG_SYS_PROMPT		"U-Boot> "
+#define CONFIG_SYS_CBSIZE		256
+#define CONFIG_SYS_MAXARGS		16
+#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
+#define CONFIG_SYS_LONGHELP		1
 #define CONFIG_CMDLINE_EDITING	1
 
 #define ROUND(A, B)		(((A) + (B)) & ~((B) - 1))
 /*
  * Size of malloc() pool
  */
-#define CFG_MALLOC_LEN		ROUND(3 * CFG_ENV_SIZE + 128*1024, 0x1000)
-#define CFG_GBL_DATA_SIZE	128	/* 128 bytes for initial data */
+#define CONFIG_SYS_MALLOC_LEN		ROUND(3 * CONFIG_ENV_SIZE + 128*1024, 0x1000)
+#define CONFIG_SYS_GBL_DATA_SIZE	128	/* 128 bytes for initial data */
 
 #define CONFIG_STACKSIZE	(32*1024)	/* regular stack */
 
diff --git a/include/configs/at91sam9rlek.h b/include/configs/at91sam9rlek.h
index 2ad8d05eb..35fefc421 100644
--- a/include/configs/at91sam9rlek.h
+++ b/include/configs/at91sam9rlek.h
@@ -29,9 +29,10 @@
 
 /* ARM asynchronous clock */
 #define AT91_CPU_NAME		"AT91SAM9RL"
-#define AT91_MAIN_CLOCK		200000000	/* from 12.000 MHz crystal */
-#define AT91_MASTER_CLOCK	100000000	/* peripheral = main / 2 */
-#define CFG_HZ			1000000		/* 1us resolution */
+#define AT91_MAIN_CLOCK		12000000	/* 12 MHz crystal */
+#define AT91_MASTER_CLOCK	100000000	/* peripheral */
+#define AT91_CPU_CLOCK		200000000	/* cpu */
+#define CONFIG_SYS_HZ		1000000		/* 1us resolution */
 
 #define AT91_SLOW_CLOCK		32768	/* slow clock */
 
@@ -63,10 +64,10 @@
 #undef LCD_TEST_PATTERN
 #define CONFIG_LCD_INFO			1
 #define CONFIG_LCD_INFO_BELOW_LOGO	1
-#define CFG_WHITE_ON_BLACK		1
+#define CONFIG_SYS_WHITE_ON_BLACK		1
 #define CONFIG_ATMEL_LCD		1
 #define CONFIG_ATMEL_LCD_RGB565		1
-#define CFG_CONSOLE_IS_IN_ENV		1
+#define CONFIG_SYS_CONSOLE_IS_IN_ENV		1
 
 #define CONFIG_BOOTDELAY	3
 
@@ -92,55 +93,52 @@
 
 /* DataFlash */
 #define CONFIG_HAS_DATAFLASH		1
-#define CFG_SPI_WRITE_TOUT		(5*CFG_HZ)
-#define CFG_MAX_DATAFLASH_BANKS		1
-#define CFG_DATAFLASH_LOGIC_ADDR_CS0	0xC0000000	/* CS0 */
+#define CONFIG_SYS_SPI_WRITE_TOUT		(5*CONFIG_SYS_HZ)
+#define CONFIG_SYS_MAX_DATAFLASH_BANKS		1
+#define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0	0xC0000000	/* CS0 */
 #define AT91_SPI_CLK			15000000
 #define DATAFLASH_TCSS			(0x1a << 16)
 #define DATAFLASH_TCHS			(0x1 << 24)
 
 /* NOR flash - not present */
-#define CFG_NO_FLASH			1
+#define CONFIG_SYS_NO_FLASH			1
 
 /* NAND flash */
 #define NAND_MAX_CHIPS			1
-#define CFG_MAX_NAND_DEVICE		1
-#define CFG_NAND_BASE			0x40000000
-#define CFG_NAND_DBW_8			1
+#define CONFIG_SYS_MAX_NAND_DEVICE		1
+#define CONFIG_SYS_NAND_BASE			0x40000000
+#define CONFIG_SYS_NAND_DBW_8			1
 
 /* Ethernet - not present */
 
 /* USB - not supported */
 
-#define CFG_LOAD_ADDR			0x22000000	/* load address */
+#define CONFIG_SYS_LOAD_ADDR			0x22000000	/* load address */
 
-#define CFG_MEMTEST_START		PHYS_SDRAM
-#define CFG_MEMTEST_END			0x23e00000
+#define CONFIG_SYS_MEMTEST_START		PHYS_SDRAM
+#define CONFIG_SYS_MEMTEST_END			0x23e00000
 
-#define CFG_USE_DATAFLASH		1
-#undef CFG_USE_NANDFLASH
-
-#ifdef CFG_USE_DATAFLASH
+#ifdef CONFIG_SYS_USE_DATAFLASH
 
 /* bootstrap + u-boot + env + linux in dataflash on CS0 */
-#define CFG_ENV_IS_IN_DATAFLASH	1
-#define CFG_MONITOR_BASE	(CFG_DATAFLASH_LOGIC_ADDR_CS0 + 0x8400)
-#define CFG_ENV_OFFSET		0x4200
-#define CFG_ENV_ADDR		(CFG_DATAFLASH_LOGIC_ADDR_CS0 + CFG_ENV_OFFSET)
-#define CFG_ENV_SIZE		0x4200
+#define CONFIG_ENV_IS_IN_DATAFLASH	1
+#define CONFIG_SYS_MONITOR_BASE	(CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 + 0x8400)
+#define CONFIG_ENV_OFFSET		0x4200
+#define CONFIG_ENV_ADDR		(CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 + CONFIG_ENV_OFFSET)
+#define CONFIG_ENV_SIZE		0x4200
 #define CONFIG_BOOTCOMMAND	"cp.b 0xC0042000 0x22000000 0x210000; bootm"
 #define CONFIG_BOOTARGS		"console=ttyS0,115200 " \
 				"root=/dev/mtdblock0 " \
 				"mtdparts=at91_nand:-(root) "\
 				"rw rootfstype=jffs2"
 
-#else /* CFG_USE_NANDFLASH */
+#else /* CONFIG_SYS_USE_NANDFLASH */
 
 /* bootstrap + u-boot + env + linux in nandflash */
-#define CFG_ENV_IS_IN_NAND	1
-#define CFG_ENV_OFFSET		0x60000
-#define CFG_ENV_OFFSET_REDUND	0x80000
-#define CFG_ENV_SIZE		0x20000		/* 1 sector = 128 kB */
+#define CONFIG_ENV_IS_IN_NAND	1
+#define CONFIG_ENV_OFFSET		0x60000
+#define CONFIG_ENV_OFFSET_REDUND	0x80000
+#define CONFIG_ENV_SIZE		0x20000		/* 1 sector = 128 kB */
 #define CONFIG_BOOTCOMMAND	"nand read 0x22000000 0xA0000 0x200000; bootm"
 #define CONFIG_BOOTARGS		"console=ttyS0,115200 " \
 				"root=/dev/mtdblock5 " \
@@ -150,21 +148,21 @@
 #endif
 
 #define CONFIG_BAUDRATE		115200
-#define CFG_BAUDRATE_TABLE	{115200 , 19200, 38400, 57600, 9600 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{115200 , 19200, 38400, 57600, 9600 }
 
-#define CFG_PROMPT		"U-Boot> "
-#define CFG_CBSIZE		256
-#define CFG_MAXARGS		16
-#define CFG_PBSIZE		(CFG_CBSIZE + sizeof(CFG_PROMPT) + 16)
-#define CFG_LONGHELP		1
+#define CONFIG_SYS_PROMPT		"U-Boot> "
+#define CONFIG_SYS_CBSIZE		256
+#define CONFIG_SYS_MAXARGS		16
+#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
+#define CONFIG_SYS_LONGHELP		1
 #define CONFIG_CMDLINE_EDITING	1
 
 #define ROUND(A, B)		(((A) + (B)) & ~((B) - 1))
 /*
  * Size of malloc() pool
  */
-#define CFG_MALLOC_LEN		ROUND(3 * CFG_ENV_SIZE + 128*1024, 0x1000)
-#define CFG_GBL_DATA_SIZE	128	/* 128 bytes for initial data */
+#define CONFIG_SYS_MALLOC_LEN		ROUND(3 * CONFIG_ENV_SIZE + 128*1024, 0x1000)
+#define CONFIG_SYS_GBL_DATA_SIZE	128	/* 128 bytes for initial data */
 
 #define CONFIG_STACKSIZE	(32*1024)	/* regular stack */
 
diff --git a/include/configs/atc.h b/include/configs/atc.h
index 285b4e4da..24015b79e 100644
--- a/include/configs/atc.h
+++ b/include/configs/atc.h
@@ -79,10 +79,10 @@
  * - RAM for BD/Buffers is on the 60x Bus (see 28-13)
  * - Enable Full Duplex in FSMR
  */
-# define CFG_CMXFCR_MASK2	(CMXFCR_FC2|CMXFCR_RF2CS_MSK|CMXFCR_TF2CS_MSK)
-# define CFG_CMXFCR_VALUE2	(CMXFCR_RF2CS_CLK13|CMXFCR_TF2CS_CLK14)
-# define CFG_CPMFCR_RAMTYPE	0
-# define CFG_FCC_PSMR		(FCC_PSMR_FDE|FCC_PSMR_LPB)
+# define CONFIG_SYS_CMXFCR_MASK2	(CMXFCR_FC2|CMXFCR_RF2CS_MSK|CMXFCR_TF2CS_MSK)
+# define CONFIG_SYS_CMXFCR_VALUE2	(CMXFCR_RF2CS_CLK13|CMXFCR_TF2CS_CLK14)
+# define CONFIG_SYS_CPMFCR_RAMTYPE	0
+# define CONFIG_SYS_FCC_PSMR		(FCC_PSMR_FDE|FCC_PSMR_LPB)
 
 #define CONFIG_ETHER_ON_FCC3
 
@@ -92,8 +92,8 @@
  * - RAM for BD/Buffers is on the local Bus (see 28-13)
  * - Enable Half Duplex in FSMR
  */
-# define CFG_CMXFCR_MASK3	(CMXFCR_FC3|CMXFCR_RF3CS_MSK|CMXFCR_TF3CS_MSK)
-# define CFG_CMXFCR_VALUE3	(CMXFCR_RF3CS_CLK15|CMXFCR_TF3CS_CLK16)
+# define CONFIG_SYS_CMXFCR_MASK3	(CMXFCR_FC3|CMXFCR_RF3CS_MSK|CMXFCR_TF3CS_MSK)
+# define CONFIG_SYS_CMXFCR_VALUE3	(CMXFCR_RF3CS_CLK15|CMXFCR_TF3CS_CLK16)
 
 /* system clock rate (CLKIN) - equal to the 60x and local bus speed */
 #define CONFIG_8260_CLKIN	64000000	/* in Hz */
@@ -120,7 +120,7 @@
  */
 
 #define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
-#undef	CFG_LOADS_BAUD_CHANGE		/* don't allow baudrate change	*/
+#undef	CONFIG_SYS_LOADS_BAUD_CHANGE		/* don't allow baudrate change	*/
 
 
 /*
@@ -150,31 +150,31 @@
 /*
  * Miscellaneous configurable options
  */
-#define	CFG_LONGHELP			/* undef to save memory		*/
-#define	CFG_PROMPT	"=> "		/* Monitor Command Prompt	*/
+#define	CONFIG_SYS_LONGHELP			/* undef to save memory		*/
+#define	CONFIG_SYS_PROMPT	"=> "		/* Monitor Command Prompt	*/
 #if defined(CONFIG_CMD_KGDB)
-#define	CFG_CBSIZE	1024		/* Console I/O Buffer Size	*/
+#define	CONFIG_SYS_CBSIZE	1024		/* Console I/O Buffer Size	*/
 #else
-#define	CFG_CBSIZE	256		/* Console I/O Buffer Size	*/
+#define	CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size	*/
 #endif
-#define	CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define	CFG_MAXARGS	16		/* max number of command args	*/
-#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+#define	CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define	CONFIG_SYS_MAXARGS	16		/* max number of command args	*/
+#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
 
-#define CFG_MEMTEST_START	0x0400000	/* memtest works on	*/
-#define CFG_MEMTEST_END	0x0C00000	/* 4 ... 12 MB in DRAM	*/
+#define CONFIG_SYS_MEMTEST_START	0x0400000	/* memtest works on	*/
+#define CONFIG_SYS_MEMTEST_END	0x0C00000	/* 4 ... 12 MB in DRAM	*/
 
-#define	CFG_LOAD_ADDR	0x100000	/* default load address	*/
+#define	CONFIG_SYS_LOAD_ADDR	0x100000	/* default load address	*/
 
-#define CFG_PIO_MODE		0	/* IDE interface in PIO Mode 0	*/
+#define CONFIG_SYS_PIO_MODE		0	/* IDE interface in PIO Mode 0	*/
 
-#define	CFG_HZ		1000		/* decrementer freq: 1 ms ticks	*/
+#define	CONFIG_SYS_HZ		1000		/* decrementer freq: 1 ms ticks	*/
 
-#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
 
-#define	CFG_RESET_ADDRESS 0xFFF00100	/* "bad" address		*/
+#define	CONFIG_SYS_RESET_ADDRESS 0xFFF00100	/* "bad" address		*/
 
-#define CFG_ALLOC_DPRAM
+#define CONFIG_SYS_ALLOC_DPRAM
 
 #undef	CONFIG_WATCHDOG			/* watchdog disabled		*/
 
@@ -193,92 +193,92 @@
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define CFG_BOOTMAPSZ		(8 << 20) /* Initial Memory map for Linux */
+#define CONFIG_SYS_BOOTMAPSZ		(8 << 20) /* Initial Memory map for Linux */
 
 /*-----------------------------------------------------------------------
  * Flash configuration
  */
 
-#define CFG_FLASH_BASE		0xFF000000
-#define CFG_FLASH_SIZE		0x00800000
+#define CONFIG_SYS_FLASH_BASE		0xFF000000
+#define CONFIG_SYS_FLASH_SIZE		0x00800000
 
 /*-----------------------------------------------------------------------
  * FLASH organization
  */
-#define CFG_MAX_FLASH_BANKS	1	/* max num of memory banks      */
-#define CFG_MAX_FLASH_SECT	128	/* max num of sects on one chip */
+#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max num of memory banks      */
+#define CONFIG_SYS_MAX_FLASH_SECT	128	/* max num of sects on one chip */
 
-#define CFG_FLASH_ERASE_TOUT	240000	/* Flash Erase Timeout (in ms)  */
-#define CFG_FLASH_WRITE_TOUT	500	/* Flash Write Timeout (in ms)  */
+#define CONFIG_SYS_FLASH_ERASE_TOUT	240000	/* Flash Erase Timeout (in ms)  */
+#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Flash Write Timeout (in ms)  */
 
 #define CONFIG_FLASH_16BIT
 
 /*-----------------------------------------------------------------------
  * Hard Reset Configuration Words
  *
- * if you change bits in the HRCW, you must also change the CFG_*
+ * if you change bits in the HRCW, you must also change the CONFIG_SYS_*
  * defines for the various registers affected by the HRCW e.g. changing
- * HRCW_DPPCxx requires you to also change CFG_SIUMCR.
+ * HRCW_DPPCxx requires you to also change CONFIG_SYS_SIUMCR.
  */
-#define CFG_HRCW_MASTER		(HRCW_CIP | HRCW_ISB100 | HRCW_BMS | \
+#define CONFIG_SYS_HRCW_MASTER		(HRCW_CIP | HRCW_ISB100 | HRCW_BMS | \
 				 HRCW_BPS10 |\
 				 HRCW_APPC10)
 
 /* no slaves so just fill with zeros */
-#define CFG_HRCW_SLAVE1		0
-#define CFG_HRCW_SLAVE2		0
-#define CFG_HRCW_SLAVE3		0
-#define CFG_HRCW_SLAVE4		0
-#define CFG_HRCW_SLAVE5		0
-#define CFG_HRCW_SLAVE6		0
-#define CFG_HRCW_SLAVE7		0
+#define CONFIG_SYS_HRCW_SLAVE1		0
+#define CONFIG_SYS_HRCW_SLAVE2		0
+#define CONFIG_SYS_HRCW_SLAVE3		0
+#define CONFIG_SYS_HRCW_SLAVE4		0
+#define CONFIG_SYS_HRCW_SLAVE5		0
+#define CONFIG_SYS_HRCW_SLAVE6		0
+#define CONFIG_SYS_HRCW_SLAVE7		0
 
 /*-----------------------------------------------------------------------
  * Internal Memory Mapped Register
  */
-#define CFG_IMMR		0xF0000000
+#define CONFIG_SYS_IMMR		0xF0000000
 
 /*-----------------------------------------------------------------------
  * Definitions for initial stack pointer and data area (in DPRAM)
  */
-#define CFG_INIT_RAM_ADDR	CFG_IMMR
-#define CFG_INIT_RAM_END	0x2F00  /* End of used area in DPRAM    */
-#define CFG_GBL_DATA_SIZE	128 /* size in bytes reserved for initial data*/
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_IMMR
+#define CONFIG_SYS_INIT_RAM_END	0x2F00  /* End of used area in DPRAM    */
+#define CONFIG_SYS_GBL_DATA_SIZE	128 /* size in bytes reserved for initial data*/
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
 /*-----------------------------------------------------------------------
  * Start addresses for the final memory configuration
  * (Set up by the startup code)
- * Please note that CFG_SDRAM_BASE _must_ start at 0
+ * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
  *
- * 60x SDRAM is mapped at CFG_SDRAM_BASE.
+ * 60x SDRAM is mapped at CONFIG_SYS_SDRAM_BASE.
  */
-#define CFG_SDRAM_BASE		0x00000000
-#define CFG_SDRAM_MAX_SIZE	0x08000000	/* max. 128 MB		*/
-#define CFG_MONITOR_BASE	TEXT_BASE
-#define CFG_MONITOR_LEN		(192 << 10)	/* Reserve 192 kB for Monitor */
-#define CFG_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()*/
+#define CONFIG_SYS_SDRAM_BASE		0x00000000
+#define CONFIG_SYS_SDRAM_MAX_SIZE	0x08000000	/* max. 128 MB		*/
+#define CONFIG_SYS_MONITOR_BASE	TEXT_BASE
+#define CONFIG_SYS_MONITOR_LEN		(192 << 10)	/* Reserve 192 kB for Monitor */
+#define CONFIG_SYS_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()*/
 
-#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
-# define CFG_RAMBOOT
+#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
+# define CONFIG_SYS_RAMBOOT
 #endif
 
 #define	CONFIG_PCI
 #define	CONFIG_PCI_PNP
-#define	CFG_PCI_MSTR_IO_BUS	0x00000000	/* PCI base   */
+#define	CONFIG_SYS_PCI_MSTR_IO_BUS	0x00000000	/* PCI base   */
 
 #if 1
 /* environment is in Flash */
-#define CFG_ENV_IS_IN_FLASH	1
-# define CFG_ENV_ADDR		(CFG_FLASH_BASE+0x30000)
-# define CFG_ENV_SIZE		0x10000
-# define CFG_ENV_SECT_SIZE	0x10000
+#define CONFIG_ENV_IS_IN_FLASH	1
+# define CONFIG_ENV_ADDR		(CONFIG_SYS_FLASH_BASE+0x30000)
+# define CONFIG_ENV_SIZE		0x10000
+# define CONFIG_ENV_SECT_SIZE	0x10000
 #else
-#define CFG_ENV_IS_IN_EEPROM	1
-#define CFG_ENV_OFFSET		0
-#define CFG_ENV_SIZE		2048
-#define CFG_EEPROM_PAGE_WRITE_BITS	4	/* 16-byte page size	*/
+#define CONFIG_ENV_IS_IN_EEPROM	1
+#define CONFIG_ENV_OFFSET		0
+#define CONFIG_ENV_SIZE		2048
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS	4	/* 16-byte page size	*/
 #endif
 /*
  * Internal Definitions
@@ -292,9 +292,9 @@
 /*-----------------------------------------------------------------------
  * Cache Configuration
  */
-#define CFG_CACHELINE_SIZE      32      /* For MPC8260 CPU              */
+#define CONFIG_SYS_CACHELINE_SIZE      32      /* For MPC8260 CPU              */
 #if defined(CONFIG_CMD_KGDB)
-# define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value */
+# define CONFIG_SYS_CACHELINE_SHIFT	5	/* log base 2 of the above value */
 #endif
 
 /*-----------------------------------------------------------------------
@@ -307,30 +307,30 @@
  *
  * HID1 has only read-only information - nothing to set.
  */
-#define CFG_HID0_INIT   (HID0_ICE|HID0_DCE|HID0_ICFI|\
+#define CONFIG_SYS_HID0_INIT   (HID0_ICE|HID0_DCE|HID0_ICFI|\
 			 HID0_DCI|HID0_IFEM|HID0_ABE)
-#define CFG_HID0_FINAL  (HID0_IFEM|HID0_ABE)
-#define CFG_HID2        0
+#define CONFIG_SYS_HID0_FINAL  (HID0_IFEM|HID0_ABE)
+#define CONFIG_SYS_HID2        0
 
 /*-----------------------------------------------------------------------
  * RMR - Reset Mode Register                                     5-5
  *-----------------------------------------------------------------------
  * turn on Checkstop Reset Enable
  */
-#define CFG_RMR         RMR_CSRE
+#define CONFIG_SYS_RMR         RMR_CSRE
 
 /*-----------------------------------------------------------------------
  * BCR - Bus Configuration                                       4-25
  *-----------------------------------------------------------------------
  */
 #define BCR_APD01	0x10000000
-#define CFG_BCR		(BCR_APD01|BCR_ETM|BCR_LETM)	/* 8260 mode */
+#define CONFIG_SYS_BCR		(BCR_APD01|BCR_ETM|BCR_LETM)	/* 8260 mode */
 
 /*-----------------------------------------------------------------------
  * SIUMCR - SIU Module Configuration                             4-31
  *-----------------------------------------------------------------------
  */
-#define CFG_SIUMCR      (SIUMCR_BBD|SIUMCR_APPC10|\
+#define CONFIG_SYS_SIUMCR      (SIUMCR_BBD|SIUMCR_APPC10|\
 			 SIUMCR_CS10PC00|SIUMCR_BCTLC10)
 
 /*-----------------------------------------------------------------------
@@ -340,10 +340,10 @@
  * Watchdog & Bus Monitor Timer max, 60x Bus Monitor enable
  */
 #if defined(CONFIG_WATCHDOG)
-#define CFG_SYPCR       (SYPCR_SWTC|SYPCR_BMT|SYPCR_PBME|SYPCR_LBME|\
+#define CONFIG_SYS_SYPCR       (SYPCR_SWTC|SYPCR_BMT|SYPCR_PBME|SYPCR_LBME|\
 			 SYPCR_SWRI|SYPCR_SWP|SYPCR_SWE)
 #else
-#define CFG_SYPCR       (SYPCR_SWTC|SYPCR_BMT|SYPCR_PBME|SYPCR_LBME|\
+#define CONFIG_SYS_SYPCR       (SYPCR_SWTC|SYPCR_BMT|SYPCR_PBME|SYPCR_LBME|\
 			 SYPCR_SWRI|SYPCR_SWP)
 #endif /* CONFIG_WATCHDOG */
 
@@ -353,7 +353,7 @@
  * Clear once per Second and Alarm Interrupt Status, Set 32KHz timersclk,
  * and enable Time Counter
  */
-#define CFG_TMCNTSC     (TMCNTSC_SEC|TMCNTSC_ALR|TMCNTSC_TCF|TMCNTSC_TCE)
+#define CONFIG_SYS_TMCNTSC     (TMCNTSC_SEC|TMCNTSC_ALR|TMCNTSC_TCF|TMCNTSC_TCE)
 
 /*-----------------------------------------------------------------------
  * PISCR - Periodic Interrupt Status and Control                 4-42
@@ -361,33 +361,33 @@
  * Clear Periodic Interrupt Status, Set 32KHz timersclk, and enable
  * Periodic timer
  */
-#define CFG_PISCR       (PISCR_PS|PISCR_PTF|PISCR_PTE)
+#define CONFIG_SYS_PISCR       (PISCR_PS|PISCR_PTF|PISCR_PTE)
 
 /*-----------------------------------------------------------------------
  * SCCR - System Clock Control                                   9-8
  *-----------------------------------------------------------------------
  * Ensure DFBRG is Divide by 16
  */
-#define CFG_SCCR        SCCR_DFBRG01
+#define CONFIG_SYS_SCCR        SCCR_DFBRG01
 
 /*-----------------------------------------------------------------------
  * RCCR - RISC Controller Configuration                         13-7
  *-----------------------------------------------------------------------
  */
-#define CFG_RCCR        0
+#define CONFIG_SYS_RCCR        0
 
-#define CFG_MIN_AM_MASK	0xC0000000
+#define CONFIG_SYS_MIN_AM_MASK	0xC0000000
 /*-----------------------------------------------------------------------
  * MPTPR - Memory Refresh Timer Prescaler Register              10-18
  *-----------------------------------------------------------------------
  */
-#define CFG_MPTPR       0x1F00
+#define CONFIG_SYS_MPTPR       0x1F00
 
 /*-----------------------------------------------------------------------
  * PSRT - Refresh Timer Register                                10-16
  *-----------------------------------------------------------------------
  */
-#define CFG_PSRT        0x0f
+#define CONFIG_SYS_PSRT        0x0f
 
 /*-----------------------------------------------------------------------
  * PSRT - SDRAM Mode Register                                   10-10
@@ -396,12 +396,12 @@
 
 	/* SDRAM initialization values for 8-column chips
 	 */
-#define CFG_OR2_8COL	(CFG_MIN_AM_MASK		|\
+#define CONFIG_SYS_OR2_8COL	(CONFIG_SYS_MIN_AM_MASK		|\
 			 ORxS_BPD_4			|\
 			 ORxS_ROWST_PBI1_A7		|\
 			 ORxS_NUMR_12)
 
-#define CFG_PSDMR_8COL	(PSDMR_PBI			|\
+#define CONFIG_SYS_PSDMR_8COL	(PSDMR_PBI			|\
 			 PSDMR_SDAM_A15_IS_A5		|\
 			 PSDMR_BSMA_A15_A17		|\
 			 PSDMR_SDA10_PBI1_A7		|\
@@ -414,12 +414,12 @@
 
 	/* SDRAM initialization values for 9-column chips
 	 */
-#define CFG_OR2_9COL	(CFG_MIN_AM_MASK		|\
+#define CONFIG_SYS_OR2_9COL	(CONFIG_SYS_MIN_AM_MASK		|\
 			 ORxS_BPD_4			|\
 			 ORxS_ROWST_PBI1_A6		|\
 			 ORxS_NUMR_12)
 
-#define CFG_PSDMR_9COL	(PSDMR_PBI			|\
+#define CONFIG_SYS_PSDMR_9COL	(PSDMR_PBI			|\
 			 PSDMR_SDAM_A16_IS_A5		|\
 			 PSDMR_BSMA_A15_A17		|\
 			 PSDMR_SDA10_PBI1_A6		|\
@@ -441,16 +441,16 @@
  *
  */
 
-#define CFG_MRS_OFFS	0x00000000
+#define CONFIG_SYS_MRS_OFFS	0x00000000
 
 /* Bank 0 - FLASH
  */
-#define CFG_BR0_PRELIM  ((CFG_FLASH_BASE & BRx_BA_MSK)  |\
+#define CONFIG_SYS_BR0_PRELIM  ((CONFIG_SYS_FLASH_BASE & BRx_BA_MSK)  |\
 			 BRx_PS_16                      |\
 			 BRx_MS_GPCM_P                  |\
 			 BRx_V)
 
-#define CFG_OR0_PRELIM  (P2SZ_TO_AM(CFG_FLASH_SIZE)     |\
+#define CONFIG_SYS_OR0_PRELIM  (P2SZ_TO_AM(CONFIG_SYS_FLASH_SIZE)     |\
 			 ORxG_CSNT                      |\
 			 ORxG_ACS_DIV1                  |\
 			 ORxG_SCY_3_CLK                 |\
@@ -459,23 +459,23 @@
 
 /* Bank 2 - 60x bus SDRAM
  */
-#ifndef CFG_RAMBOOT
-#define CFG_BR2_PRELIM  ((CFG_SDRAM_BASE & BRx_BA_MSK)  |\
+#ifndef CONFIG_SYS_RAMBOOT
+#define CONFIG_SYS_BR2_PRELIM  ((CONFIG_SYS_SDRAM_BASE & BRx_BA_MSK)  |\
 			 BRx_PS_64                      |\
 			 BRx_MS_SDRAM_P                 |\
 			 BRx_V)
 
-#define CFG_OR2_PRELIM	 CFG_OR2_8COL
+#define CONFIG_SYS_OR2_PRELIM	 CONFIG_SYS_OR2_8COL
 
-#define CFG_PSDMR	 CFG_PSDMR_8COL
-#endif /* CFG_RAMBOOT */
+#define CONFIG_SYS_PSDMR	 CONFIG_SYS_PSDMR_8COL
+#endif /* CONFIG_SYS_RAMBOOT */
 
-#define CFG_BR4_PRELIM  ((RTC_BASE_ADDR & BRx_BA_MSK)   |\
+#define CONFIG_SYS_BR4_PRELIM  ((RTC_BASE_ADDR & BRx_BA_MSK)   |\
 			 BRx_PS_8                       |\
 			 BRx_MS_UPMA                    |\
 			 BRx_V)
 
-#define CFG_OR4_PRELIM  (ORxU_AM_MSK | ORxU_BI)
+#define CONFIG_SYS_OR4_PRELIM  (ORxU_AM_MSK | ORxU_BI)
 
 /*-----------------------------------------------------------------------
  * PCMCIA stuff
@@ -484,8 +484,8 @@
  */
 #define CONFIG_I82365
 
-#define CFG_PCMCIA_MEM_ADDR	0x81000000
-#define CFG_PCMCIA_MEM_SIZE	0x1000
+#define CONFIG_SYS_PCMCIA_MEM_ADDR	0x81000000
+#define CONFIG_SYS_PCMCIA_MEM_SIZE	0x1000
 
 /*-----------------------------------------------------------------------
  * IDE/ATA stuff (Supports IDE harddisk on PCMCIA Adapter)
@@ -498,20 +498,20 @@
 #undef	CONFIG_IDE_LED			/* LED	 for ide not supported	*/
 #undef	CONFIG_IDE_RESET		/* reset for ide not supported	*/
 
-#define CFG_IDE_MAXBUS		1	/* max. 1 IDE bus		*/
-#define CFG_IDE_MAXDEVICE	1	/* max. 1 drive per IDE bus	*/
+#define CONFIG_SYS_IDE_MAXBUS		1	/* max. 1 IDE bus		*/
+#define CONFIG_SYS_IDE_MAXDEVICE	1	/* max. 1 drive per IDE bus	*/
 
-#define CFG_ATA_IDE0_OFFSET	0x0000
+#define CONFIG_SYS_ATA_IDE0_OFFSET	0x0000
 
-#define CFG_ATA_BASE_ADDR	0xa0000000
+#define CONFIG_SYS_ATA_BASE_ADDR	0xa0000000
 
 /* Offset for data I/O			*/
-#define CFG_ATA_DATA_OFFSET	0x100
+#define CONFIG_SYS_ATA_DATA_OFFSET	0x100
 
 /* Offset for normal register accesses	*/
-#define CFG_ATA_REG_OFFSET	0x100
+#define CONFIG_SYS_ATA_REG_OFFSET	0x100
 
 /* Offset for alternate registers	*/
-#define CFG_ATA_ALT_OFFSET	0x108
+#define CONFIG_SYS_ATA_ALT_OFFSET	0x108
 
 #endif	/* __CONFIG_H */
diff --git a/include/configs/atngw100.h b/include/configs/atngw100.h
index 323b096ab..c998952fb 100644
--- a/include/configs/atngw100.h
+++ b/include/configs/atngw100.h
@@ -31,7 +31,7 @@
 #define CONFIG_AT32AP7000		1
 #define CONFIG_ATNGW100			1
 
-#define CFG_HZ				1000
+#define CONFIG_SYS_HZ				1000
 
 /*
  * Set up the PLL to run at 140 MHz, the CPU to run at the PLL
@@ -39,15 +39,15 @@
  * and the PBA bus to run at 1/4 the PLL frequency.
  */
 #define CONFIG_PLL			1
-#define CFG_POWER_MANAGER		1
-#define CFG_OSC0_HZ			20000000
-#define CFG_PLL0_DIV			1
-#define CFG_PLL0_MUL			7
-#define CFG_PLL0_SUPPRESS_CYCLES	16
-#define CFG_CLKDIV_CPU			0
-#define CFG_CLKDIV_HSB			1
-#define CFG_CLKDIV_PBA			2
-#define CFG_CLKDIV_PBB			1
+#define CONFIG_SYS_POWER_MANAGER		1
+#define CONFIG_SYS_OSC0_HZ			20000000
+#define CONFIG_SYS_PLL0_DIV			1
+#define CONFIG_SYS_PLL0_MUL			7
+#define CONFIG_SYS_PLL0_SUPPRESS_CYCLES	16
+#define CONFIG_SYS_CLKDIV_CPU			0
+#define CONFIG_SYS_CLKDIV_HSB			1
+#define CONFIG_SYS_CLKDIV_PBA			2
+#define CONFIG_SYS_CLKDIV_PBB			1
 
 /*
  * The PLLOPT register controls the PLL like this:
@@ -56,7 +56,7 @@
  *
  * We want icp=1 (default) and ivco=0 (80-160 MHz) or ivco=2 (150-240MHz).
  */
-#define CFG_PLL0_OPT			0x04
+#define CONFIG_SYS_PLL0_OPT			0x04
 
 #define CONFIG_USART1			1
 
@@ -125,8 +125,8 @@
 #define CONFIG_ATMEL_USART		1
 #define CONFIG_MACB			1
 #define CONFIG_PORTMUX_PIO		1
-#define CFG_NR_PIOS			5
-#define CFG_HSDRAMC			1
+#define CONFIG_SYS_NR_PIOS			5
+#define CONFIG_SYS_HSDRAMC			1
 #define CONFIG_MMC			1
 #define CONFIG_ATMEL_MCI		1
 #define CONFIG_ATMEL_SPI		1
@@ -134,48 +134,48 @@
 #define CONFIG_SPI_FLASH		1
 #define CONFIG_SPI_FLASH_ATMEL		1
 
-#define CFG_DCACHE_LINESZ		32
-#define CFG_ICACHE_LINESZ		32
+#define CONFIG_SYS_DCACHE_LINESZ		32
+#define CONFIG_SYS_ICACHE_LINESZ		32
 
 #define CONFIG_NR_DRAM_BANKS		1
 
-#define CFG_FLASH_CFI			1
+#define CONFIG_SYS_FLASH_CFI			1
 #define CONFIG_FLASH_CFI_DRIVER		1
 
-#define CFG_FLASH_BASE			0x00000000
-#define CFG_FLASH_SIZE			0x800000
-#define CFG_MAX_FLASH_BANKS		1
-#define CFG_MAX_FLASH_SECT		135
+#define CONFIG_SYS_FLASH_BASE			0x00000000
+#define CONFIG_SYS_FLASH_SIZE			0x800000
+#define CONFIG_SYS_MAX_FLASH_BANKS		1
+#define CONFIG_SYS_MAX_FLASH_SECT		135
 
-#define CFG_MONITOR_BASE		CFG_FLASH_BASE
+#define CONFIG_SYS_MONITOR_BASE		CONFIG_SYS_FLASH_BASE
 
-#define CFG_INTRAM_BASE			INTERNAL_SRAM_BASE
-#define CFG_INTRAM_SIZE			INTERNAL_SRAM_SIZE
-#define CFG_SDRAM_BASE			EBI_SDRAM_BASE
+#define CONFIG_SYS_INTRAM_BASE			INTERNAL_SRAM_BASE
+#define CONFIG_SYS_INTRAM_SIZE			INTERNAL_SRAM_SIZE
+#define CONFIG_SYS_SDRAM_BASE			EBI_SDRAM_BASE
 
-#define CFG_ENV_IS_IN_FLASH		1
-#define CFG_ENV_SIZE			65536
-#define CFG_ENV_ADDR			(CFG_FLASH_BASE + CFG_FLASH_SIZE - CFG_ENV_SIZE)
+#define CONFIG_ENV_IS_IN_FLASH		1
+#define CONFIG_ENV_SIZE			65536
+#define CONFIG_ENV_ADDR			(CONFIG_SYS_FLASH_BASE + CONFIG_SYS_FLASH_SIZE - CONFIG_ENV_SIZE)
 
-#define CFG_INIT_SP_ADDR		(CFG_INTRAM_BASE + CFG_INTRAM_SIZE)
+#define CONFIG_SYS_INIT_SP_ADDR		(CONFIG_SYS_INTRAM_BASE + CONFIG_SYS_INTRAM_SIZE)
 
-#define CFG_MALLOC_LEN			(256*1024)
-#define CFG_DMA_ALLOC_LEN		(16384)
+#define CONFIG_SYS_MALLOC_LEN			(256*1024)
+#define CONFIG_SYS_DMA_ALLOC_LEN		(16384)
 
 /* Allow 4MB for the kernel run-time image */
-#define CFG_LOAD_ADDR			(EBI_SDRAM_BASE + 0x00400000)
-#define CFG_BOOTPARAMS_LEN		(16 * 1024)
+#define CONFIG_SYS_LOAD_ADDR			(EBI_SDRAM_BASE + 0x00400000)
+#define CONFIG_SYS_BOOTPARAMS_LEN		(16 * 1024)
 
 /* Other configuration settings that shouldn't have to change all that often */
-#define CFG_PROMPT			"U-Boot> "
-#define CFG_CBSIZE			256
-#define CFG_MAXARGS			16
-#define CFG_PBSIZE			(CFG_CBSIZE + sizeof(CFG_PROMPT) + 16)
-#define CFG_LONGHELP			1
+#define CONFIG_SYS_PROMPT			"U-Boot> "
+#define CONFIG_SYS_CBSIZE			256
+#define CONFIG_SYS_MAXARGS			16
+#define CONFIG_SYS_PBSIZE			(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
+#define CONFIG_SYS_LONGHELP			1
 
-#define CFG_MEMTEST_START		EBI_SDRAM_BASE
-#define CFG_MEMTEST_END			(CFG_MEMTEST_START + 0x1f00000)
+#define CONFIG_SYS_MEMTEST_START		EBI_SDRAM_BASE
+#define CONFIG_SYS_MEMTEST_END			(CONFIG_SYS_MEMTEST_START + 0x1f00000)
 
-#define CFG_BAUDRATE_TABLE { 115200, 38400, 19200, 9600, 2400 }
+#define CONFIG_SYS_BAUDRATE_TABLE { 115200, 38400, 19200, 9600, 2400 }
 
 #endif /* __CONFIG_H */
diff --git a/include/configs/atstk1002.h b/include/configs/atstk1002.h
index 85cedb2fb..2284277da 100644
--- a/include/configs/atstk1002.h
+++ b/include/configs/atstk1002.h
@@ -38,40 +38,40 @@
  * Timer clock frequency. We're using the CPU-internal COUNT register
  * for this, so this is equivalent to the CPU core clock frequency
  */
-#define CFG_HZ				1000
+#define CONFIG_SYS_HZ				1000
 
 /*
  * Set up the PLL to run at 140 MHz, the CPU to run at the PLL
  * frequency, the HSB and PBB at 1/2, and the PBA to run at 1/4 the
  * PLL frequency.
- * (CFG_OSC0_HZ * CFG_PLL0_MUL) / CFG_PLL0_DIV = PLL MHz
+ * (CONFIG_SYS_OSC0_HZ * CONFIG_SYS_PLL0_MUL) / CONFIG_SYS_PLL0_DIV = PLL MHz
  */
 #define CONFIG_PLL			1
-#define CFG_POWER_MANAGER		1
-#define CFG_OSC0_HZ			20000000
-#define CFG_PLL0_DIV			1
-#define CFG_PLL0_MUL			7
-#define CFG_PLL0_SUPPRESS_CYCLES	16
+#define CONFIG_SYS_POWER_MANAGER		1
+#define CONFIG_SYS_OSC0_HZ			20000000
+#define CONFIG_SYS_PLL0_DIV			1
+#define CONFIG_SYS_PLL0_MUL			7
+#define CONFIG_SYS_PLL0_SUPPRESS_CYCLES	16
 /*
  * Set the CPU running at:
- * PLL / (2^CFG_CLKDIV_CPU) = CPU MHz
+ * PLL / (2^CONFIG_SYS_CLKDIV_CPU) = CPU MHz
  */
-#define CFG_CLKDIV_CPU			0
+#define CONFIG_SYS_CLKDIV_CPU			0
 /*
  * Set the HSB running at:
- * PLL / (2^CFG_CLKDIV_HSB) = HSB MHz
+ * PLL / (2^CONFIG_SYS_CLKDIV_HSB) = HSB MHz
  */
-#define CFG_CLKDIV_HSB			1
+#define CONFIG_SYS_CLKDIV_HSB			1
 /*
  * Set the PBA running at:
- * PLL / (2^CFG_CLKDIV_PBA) = PBA MHz
+ * PLL / (2^CONFIG_SYS_CLKDIV_PBA) = PBA MHz
  */
-#define CFG_CLKDIV_PBA			2
+#define CONFIG_SYS_CLKDIV_PBA			2
 /*
  * Set the PBB running at:
- * PLL / (2^CFG_CLKDIV_PBB) = PBB MHz
+ * PLL / (2^CONFIG_SYS_CLKDIV_PBB) = PBB MHz
  */
-#define CFG_CLKDIV_PBB			1
+#define CONFIG_SYS_CLKDIV_PBB			1
 
 /*
  * The PLLOPT register controls the PLL like this:
@@ -80,7 +80,7 @@
  *
  * We want icp=1 (default) and ivco=0 (80-160 MHz) or ivco=2 (150-240MHz).
  */
-#define CFG_PLL0_OPT			0x04
+#define CONFIG_SYS_PLL0_OPT			0x04
 
 #undef CONFIG_USART0
 #define CONFIG_USART1			1
@@ -150,55 +150,55 @@
 #define CONFIG_ATMEL_USART		1
 #define CONFIG_MACB			1
 #define CONFIG_PORTMUX_PIO		1
-#define CFG_NR_PIOS			5
-#define CFG_HSDRAMC			1
+#define CONFIG_SYS_NR_PIOS			5
+#define CONFIG_SYS_HSDRAMC			1
 #define CONFIG_MMC			1
 #define CONFIG_ATMEL_MCI		1
 
-#define CFG_DCACHE_LINESZ		32
-#define CFG_ICACHE_LINESZ		32
+#define CONFIG_SYS_DCACHE_LINESZ		32
+#define CONFIG_SYS_ICACHE_LINESZ		32
 
 #define CONFIG_NR_DRAM_BANKS		1
 
 /* External flash on STK1000 */
 #if 0
-#define CFG_FLASH_CFI			1
+#define CONFIG_SYS_FLASH_CFI			1
 #define CONFIG_FLASH_CFI_DRIVER		1
 #endif
 
-#define CFG_FLASH_BASE			0x00000000
-#define CFG_FLASH_SIZE			0x800000
-#define CFG_MAX_FLASH_BANKS		1
-#define CFG_MAX_FLASH_SECT		135
+#define CONFIG_SYS_FLASH_BASE			0x00000000
+#define CONFIG_SYS_FLASH_SIZE			0x800000
+#define CONFIG_SYS_MAX_FLASH_BANKS		1
+#define CONFIG_SYS_MAX_FLASH_SECT		135
 
-#define CFG_MONITOR_BASE		CFG_FLASH_BASE
+#define CONFIG_SYS_MONITOR_BASE		CONFIG_SYS_FLASH_BASE
 
-#define CFG_INTRAM_BASE			INTERNAL_SRAM_BASE
-#define CFG_INTRAM_SIZE			INTERNAL_SRAM_SIZE
-#define CFG_SDRAM_BASE			EBI_SDRAM_BASE
+#define CONFIG_SYS_INTRAM_BASE			INTERNAL_SRAM_BASE
+#define CONFIG_SYS_INTRAM_SIZE			INTERNAL_SRAM_SIZE
+#define CONFIG_SYS_SDRAM_BASE			EBI_SDRAM_BASE
 
-#define CFG_ENV_IS_IN_FLASH		1
-#define CFG_ENV_SIZE			65536
-#define CFG_ENV_ADDR			(CFG_FLASH_BASE + CFG_FLASH_SIZE - CFG_ENV_SIZE)
+#define CONFIG_ENV_IS_IN_FLASH		1
+#define CONFIG_ENV_SIZE			65536
+#define CONFIG_ENV_ADDR			(CONFIG_SYS_FLASH_BASE + CONFIG_SYS_FLASH_SIZE - CONFIG_ENV_SIZE)
 
-#define CFG_INIT_SP_ADDR		(CFG_INTRAM_BASE + CFG_INTRAM_SIZE)
+#define CONFIG_SYS_INIT_SP_ADDR		(CONFIG_SYS_INTRAM_BASE + CONFIG_SYS_INTRAM_SIZE)
 
-#define CFG_MALLOC_LEN			(256*1024)
-#define CFG_DMA_ALLOC_LEN		(16384)
+#define CONFIG_SYS_MALLOC_LEN			(256*1024)
+#define CONFIG_SYS_DMA_ALLOC_LEN		(16384)
 
 /* Allow 4MB for the kernel run-time image */
-#define CFG_LOAD_ADDR			(EBI_SDRAM_BASE + 0x00400000)
-#define CFG_BOOTPARAMS_LEN		(16 * 1024)
+#define CONFIG_SYS_LOAD_ADDR			(EBI_SDRAM_BASE + 0x00400000)
+#define CONFIG_SYS_BOOTPARAMS_LEN		(16 * 1024)
 
 /* Other configuration settings that shouldn't have to change all that often */
-#define CFG_PROMPT			"U-Boot> "
-#define CFG_CBSIZE			256
-#define CFG_MAXARGS			16
-#define CFG_PBSIZE			(CFG_CBSIZE + sizeof(CFG_PROMPT) + 16)
-#define CFG_LONGHELP			1
-
-#define CFG_MEMTEST_START		EBI_SDRAM_BASE
-#define CFG_MEMTEST_END			(CFG_MEMTEST_START + 0x700000)
-#define CFG_BAUDRATE_TABLE { 115200, 38400, 19200, 9600, 2400 }
+#define CONFIG_SYS_PROMPT			"U-Boot> "
+#define CONFIG_SYS_CBSIZE			256
+#define CONFIG_SYS_MAXARGS			16
+#define CONFIG_SYS_PBSIZE			(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
+#define CONFIG_SYS_LONGHELP			1
+
+#define CONFIG_SYS_MEMTEST_START		EBI_SDRAM_BASE
+#define CONFIG_SYS_MEMTEST_END			(CONFIG_SYS_MEMTEST_START + 0x700000)
+#define CONFIG_SYS_BAUDRATE_TABLE { 115200, 38400, 19200, 9600, 2400 }
 
 #endif /* __CONFIG_H */
diff --git a/include/configs/atstk1003.h b/include/configs/atstk1003.h
index 9aa0692c0..2ef255274 100644
--- a/include/configs/atstk1003.h
+++ b/include/configs/atstk1003.h
@@ -38,40 +38,40 @@
  * Timer clock frequency. We're using the CPU-internal COUNT register
  * for this, so this is equivalent to the CPU core clock frequency
  */
-#define CFG_HZ				1000
+#define CONFIG_SYS_HZ				1000
 
 /*
  * Set up the PLL to run at 140 MHz, the CPU to run at the PLL
  * frequency, the HSB and PBB at 1/2, and the PBA to run at 1/4 the
  * PLL frequency.
- * (CFG_OSC0_HZ * CFG_PLL0_MUL) / CFG_PLL0_DIV = PLL MHz
+ * (CONFIG_SYS_OSC0_HZ * CONFIG_SYS_PLL0_MUL) / CONFIG_SYS_PLL0_DIV = PLL MHz
  */
 #define CONFIG_PLL			1
-#define CFG_POWER_MANAGER		1
-#define CFG_OSC0_HZ			20000000
-#define CFG_PLL0_DIV			1
-#define CFG_PLL0_MUL			7
-#define CFG_PLL0_SUPPRESS_CYCLES	16
+#define CONFIG_SYS_POWER_MANAGER		1
+#define CONFIG_SYS_OSC0_HZ			20000000
+#define CONFIG_SYS_PLL0_DIV			1
+#define CONFIG_SYS_PLL0_MUL			7
+#define CONFIG_SYS_PLL0_SUPPRESS_CYCLES	16
 /*
  * Set the CPU running at:
- * PLL / (2^CFG_CLKDIV_CPU) = CPU MHz
+ * PLL / (2^CONFIG_SYS_CLKDIV_CPU) = CPU MHz
  */
-#define CFG_CLKDIV_CPU			0
+#define CONFIG_SYS_CLKDIV_CPU			0
 /*
  * Set the HSB running at:
- * PLL / (2^CFG_CLKDIV_HSB) = HSB MHz
+ * PLL / (2^CONFIG_SYS_CLKDIV_HSB) = HSB MHz
  */
-#define CFG_CLKDIV_HSB			1
+#define CONFIG_SYS_CLKDIV_HSB			1
 /*
  * Set the PBA running at:
- * PLL / (2^CFG_CLKDIV_PBA) = PBA MHz
+ * PLL / (2^CONFIG_SYS_CLKDIV_PBA) = PBA MHz
  */
-#define CFG_CLKDIV_PBA			2
+#define CONFIG_SYS_CLKDIV_PBA			2
 /*
  * Set the PBB running at:
- * PLL / (2^CFG_CLKDIV_PBB) = PBB MHz
+ * PLL / (2^CONFIG_SYS_CLKDIV_PBB) = PBB MHz
  */
-#define CFG_CLKDIV_PBB			1
+#define CONFIG_SYS_CLKDIV_PBB			1
 
 /*
  * The PLLOPT register controls the PLL like this:
@@ -80,7 +80,7 @@
  *
  * We want icp=1 (default) and ivco=0 (80-160 MHz) or ivco=2 (150-240MHz).
  */
-#define CFG_PLL0_OPT			0x04
+#define CONFIG_SYS_PLL0_OPT			0x04
 
 #undef CONFIG_USART0
 #define CONFIG_USART1			1
@@ -134,53 +134,53 @@
 
 #define CONFIG_ATMEL_USART		1
 #define CONFIG_PORTMUX_PIO		1
-#define CFG_HSDRAMC			1
+#define CONFIG_SYS_HSDRAMC			1
 #define CONFIG_MMC			1
 #define CONFIG_ATMEL_MCI		1
 
-#define CFG_DCACHE_LINESZ		32
-#define CFG_ICACHE_LINESZ		32
+#define CONFIG_SYS_DCACHE_LINESZ		32
+#define CONFIG_SYS_ICACHE_LINESZ		32
 
 #define CONFIG_NR_DRAM_BANKS		1
 
 /* External flash on STK1000 */
 #if 0
-#define CFG_FLASH_CFI			1
+#define CONFIG_SYS_FLASH_CFI			1
 #define CONFIG_FLASH_CFI_DRIVER		1
 #endif
 
-#define CFG_FLASH_BASE			0x00000000
-#define CFG_FLASH_SIZE			0x800000
-#define CFG_MAX_FLASH_BANKS		1
-#define CFG_MAX_FLASH_SECT		135
+#define CONFIG_SYS_FLASH_BASE			0x00000000
+#define CONFIG_SYS_FLASH_SIZE			0x800000
+#define CONFIG_SYS_MAX_FLASH_BANKS		1
+#define CONFIG_SYS_MAX_FLASH_SECT		135
 
-#define CFG_MONITOR_BASE		CFG_FLASH_BASE
+#define CONFIG_SYS_MONITOR_BASE		CONFIG_SYS_FLASH_BASE
 
-#define CFG_INTRAM_BASE			INTERNAL_SRAM_BASE
-#define CFG_INTRAM_SIZE			INTERNAL_SRAM_SIZE
-#define CFG_SDRAM_BASE			EBI_SDRAM_BASE
+#define CONFIG_SYS_INTRAM_BASE			INTERNAL_SRAM_BASE
+#define CONFIG_SYS_INTRAM_SIZE			INTERNAL_SRAM_SIZE
+#define CONFIG_SYS_SDRAM_BASE			EBI_SDRAM_BASE
 
-#define CFG_ENV_IS_IN_FLASH		1
-#define CFG_ENV_SIZE			65536
-#define CFG_ENV_ADDR			(CFG_FLASH_BASE + CFG_FLASH_SIZE - CFG_ENV_SIZE)
+#define CONFIG_ENV_IS_IN_FLASH		1
+#define CONFIG_ENV_SIZE			65536
+#define CONFIG_ENV_ADDR			(CONFIG_SYS_FLASH_BASE + CONFIG_SYS_FLASH_SIZE - CONFIG_ENV_SIZE)
 
-#define CFG_INIT_SP_ADDR		(CFG_INTRAM_BASE + CFG_INTRAM_SIZE)
+#define CONFIG_SYS_INIT_SP_ADDR		(CONFIG_SYS_INTRAM_BASE + CONFIG_SYS_INTRAM_SIZE)
 
-#define CFG_MALLOC_LEN			(256*1024)
+#define CONFIG_SYS_MALLOC_LEN			(256*1024)
 
 /* Allow 4MB for the kernel run-time image */
-#define CFG_LOAD_ADDR			(EBI_SDRAM_BASE + 0x00400000)
-#define CFG_BOOTPARAMS_LEN		(16 * 1024)
+#define CONFIG_SYS_LOAD_ADDR			(EBI_SDRAM_BASE + 0x00400000)
+#define CONFIG_SYS_BOOTPARAMS_LEN		(16 * 1024)
 
 /* Other configuration settings that shouldn't have to change all that often */
-#define CFG_PROMPT			"U-Boot> "
-#define CFG_CBSIZE			256
-#define CFG_MAXARGS			16
-#define CFG_PBSIZE			(CFG_CBSIZE + sizeof(CFG_PROMPT) + 16)
-#define CFG_LONGHELP			1
-
-#define CFG_MEMTEST_START		EBI_SDRAM_BASE
-#define CFG_MEMTEST_END			(CFG_MEMTEST_START + 0x700000)
-#define CFG_BAUDRATE_TABLE { 115200, 38400, 19200, 9600, 2400 }
+#define CONFIG_SYS_PROMPT			"U-Boot> "
+#define CONFIG_SYS_CBSIZE			256
+#define CONFIG_SYS_MAXARGS			16
+#define CONFIG_SYS_PBSIZE			(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
+#define CONFIG_SYS_LONGHELP			1
+
+#define CONFIG_SYS_MEMTEST_START		EBI_SDRAM_BASE
+#define CONFIG_SYS_MEMTEST_END			(CONFIG_SYS_MEMTEST_START + 0x700000)
+#define CONFIG_SYS_BAUDRATE_TABLE { 115200, 38400, 19200, 9600, 2400 }
 
 #endif /* __CONFIG_H */
diff --git a/include/configs/atstk1004.h b/include/configs/atstk1004.h
index d8ce339c2..195be8209 100644
--- a/include/configs/atstk1004.h
+++ b/include/configs/atstk1004.h
@@ -38,40 +38,40 @@
  * Timer clock frequency. We're using the CPU-internal COUNT register
  * for this, so this is equivalent to the CPU core clock frequency
  */
-#define CFG_HZ				1000
+#define CONFIG_SYS_HZ				1000
 
 /*
  * Set up the PLL to run at 140 MHz, the CPU to run at the PLL
  * frequency, the HSB and PBB at 1/2, and the PBA to run at 1/4 the
  * PLL frequency.
- * (CFG_OSC0_HZ * CFG_PLL0_MUL) / CFG_PLL0_DIV = PLL MHz
+ * (CONFIG_SYS_OSC0_HZ * CONFIG_SYS_PLL0_MUL) / CONFIG_SYS_PLL0_DIV = PLL MHz
  */
 #define CONFIG_PLL			1
-#define CFG_POWER_MANAGER		1
-#define CFG_OSC0_HZ			20000000
-#define CFG_PLL0_DIV			1
-#define CFG_PLL0_MUL			7
-#define CFG_PLL0_SUPPRESS_CYCLES	16
+#define CONFIG_SYS_POWER_MANAGER		1
+#define CONFIG_SYS_OSC0_HZ			20000000
+#define CONFIG_SYS_PLL0_DIV			1
+#define CONFIG_SYS_PLL0_MUL			7
+#define CONFIG_SYS_PLL0_SUPPRESS_CYCLES	16
 /*
  * Set the CPU running at:
- * PLL / (2^CFG_CLKDIV_CPU) = CPU MHz
+ * PLL / (2^CONFIG_SYS_CLKDIV_CPU) = CPU MHz
  */
-#define CFG_CLKDIV_CPU			0
+#define CONFIG_SYS_CLKDIV_CPU			0
 /*
  * Set the HSB running at:
- * PLL / (2^CFG_CLKDIV_HSB) = HSB MHz
+ * PLL / (2^CONFIG_SYS_CLKDIV_HSB) = HSB MHz
  */
-#define CFG_CLKDIV_HSB			1
+#define CONFIG_SYS_CLKDIV_HSB			1
 /*
  * Set the PBA running at:
- * PLL / (2^CFG_CLKDIV_PBA) = PBA MHz
+ * PLL / (2^CONFIG_SYS_CLKDIV_PBA) = PBA MHz
  */
-#define CFG_CLKDIV_PBA			2
+#define CONFIG_SYS_CLKDIV_PBA			2
 /*
  * Set the PBB running at:
- * PLL / (2^CFG_CLKDIV_PBB) = PBB MHz
+ * PLL / (2^CONFIG_SYS_CLKDIV_PBB) = PBB MHz
  */
-#define CFG_CLKDIV_PBB			1
+#define CONFIG_SYS_CLKDIV_PBB			1
 
 /*
  * The PLLOPT register controls the PLL like this:
@@ -80,7 +80,7 @@
  *
  * We want icp=1 (default) and ivco=0 (80-160 MHz) or ivco=2 (150-240MHz).
  */
-#define CFG_PLL0_OPT			0x04
+#define CONFIG_SYS_PLL0_OPT			0x04
 
 #undef CONFIG_USART0
 #define CONFIG_USART1			1
@@ -134,53 +134,53 @@
 
 #define CONFIG_ATMEL_USART		1
 #define CONFIG_PORTMUX_PIO		1
-#define CFG_HSDRAMC			1
+#define CONFIG_SYS_HSDRAMC			1
 #define CONFIG_MMC			1
 #define CONFIG_ATMEL_MCI		1
 
-#define CFG_DCACHE_LINESZ		32
-#define CFG_ICACHE_LINESZ		32
+#define CONFIG_SYS_DCACHE_LINESZ		32
+#define CONFIG_SYS_ICACHE_LINESZ		32
 
 #define CONFIG_NR_DRAM_BANKS		1
 
 /* External flash on STK1000 */
 #if 0
-#define CFG_FLASH_CFI			1
+#define CONFIG_SYS_FLASH_CFI			1
 #define CONFIG_FLASH_CFI_DRIVER		1
 #endif
 
-#define CFG_FLASH_BASE			0x00000000
-#define CFG_FLASH_SIZE			0x800000
-#define CFG_MAX_FLASH_BANKS		1
-#define CFG_MAX_FLASH_SECT		135
+#define CONFIG_SYS_FLASH_BASE			0x00000000
+#define CONFIG_SYS_FLASH_SIZE			0x800000
+#define CONFIG_SYS_MAX_FLASH_BANKS		1
+#define CONFIG_SYS_MAX_FLASH_SECT		135
 
-#define CFG_MONITOR_BASE		CFG_FLASH_BASE
+#define CONFIG_SYS_MONITOR_BASE		CONFIG_SYS_FLASH_BASE
 
-#define CFG_INTRAM_BASE			INTERNAL_SRAM_BASE
-#define CFG_INTRAM_SIZE			INTERNAL_SRAM_SIZE
-#define CFG_SDRAM_BASE			EBI_SDRAM_BASE
+#define CONFIG_SYS_INTRAM_BASE			INTERNAL_SRAM_BASE
+#define CONFIG_SYS_INTRAM_SIZE			INTERNAL_SRAM_SIZE
+#define CONFIG_SYS_SDRAM_BASE			EBI_SDRAM_BASE
 
-#define CFG_ENV_IS_IN_FLASH		1
-#define CFG_ENV_SIZE			65536
-#define CFG_ENV_ADDR			(CFG_FLASH_BASE + CFG_FLASH_SIZE - CFG_ENV_SIZE)
+#define CONFIG_ENV_IS_IN_FLASH		1
+#define CONFIG_ENV_SIZE			65536
+#define CONFIG_ENV_ADDR			(CONFIG_SYS_FLASH_BASE + CONFIG_SYS_FLASH_SIZE - CONFIG_ENV_SIZE)
 
-#define CFG_INIT_SP_ADDR		(CFG_INTRAM_BASE + CFG_INTRAM_SIZE)
+#define CONFIG_SYS_INIT_SP_ADDR		(CONFIG_SYS_INTRAM_BASE + CONFIG_SYS_INTRAM_SIZE)
 
-#define CFG_MALLOC_LEN			(256*1024)
+#define CONFIG_SYS_MALLOC_LEN			(256*1024)
 
 /* Allow 2MB for the kernel run-time image */
-#define CFG_LOAD_ADDR			(EBI_SDRAM_BASE + 0x00200000)
-#define CFG_BOOTPARAMS_LEN		(16 * 1024)
+#define CONFIG_SYS_LOAD_ADDR			(EBI_SDRAM_BASE + 0x00200000)
+#define CONFIG_SYS_BOOTPARAMS_LEN		(16 * 1024)
 
 /* Other configuration settings that shouldn't have to change all that often */
-#define CFG_PROMPT			"U-Boot> "
-#define CFG_CBSIZE			256
-#define CFG_MAXARGS			16
-#define CFG_PBSIZE			(CFG_CBSIZE + sizeof(CFG_PROMPT) + 16)
-#define CFG_LONGHELP			1
-
-#define CFG_MEMTEST_START		EBI_SDRAM_BASE
-#define CFG_MEMTEST_END			(CFG_MEMTEST_START + 0x700000)
-#define CFG_BAUDRATE_TABLE { 115200, 38400, 19200, 9600, 2400 }
+#define CONFIG_SYS_PROMPT			"U-Boot> "
+#define CONFIG_SYS_CBSIZE			256
+#define CONFIG_SYS_MAXARGS			16
+#define CONFIG_SYS_PBSIZE			(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
+#define CONFIG_SYS_LONGHELP			1
+
+#define CONFIG_SYS_MEMTEST_START		EBI_SDRAM_BASE
+#define CONFIG_SYS_MEMTEST_END			(CONFIG_SYS_MEMTEST_START + 0x700000)
+#define CONFIG_SYS_BAUDRATE_TABLE { 115200, 38400, 19200, 9600, 2400 }
 
 #endif /* __CONFIG_H */
diff --git a/include/configs/atstk1006.h b/include/configs/atstk1006.h
index d4b2f12aa..8cfa31269 100644
--- a/include/configs/atstk1006.h
+++ b/include/configs/atstk1006.h
@@ -38,40 +38,40 @@
  * Timer clock frequency. We're using the CPU-internal COUNT register
  * for this, so this is equivalent to the CPU core clock frequency
  */
-#define CFG_HZ				1000
+#define CONFIG_SYS_HZ				1000
 
 /*
  * Set up the PLL to run at 140 MHz, the CPU to run at the PLL
  * frequency, the HSB and PBB at 1/2, and the PBA to run at 1/4 the
  * PLL frequency.
- * (CFG_OSC0_HZ * CFG_PLL0_MUL) / CFG_PLL0_DIV = PLL MHz
+ * (CONFIG_SYS_OSC0_HZ * CONFIG_SYS_PLL0_MUL) / CONFIG_SYS_PLL0_DIV = PLL MHz
  */
 #define CONFIG_PLL			1
-#define CFG_POWER_MANAGER		1
-#define CFG_OSC0_HZ			20000000
-#define CFG_PLL0_DIV			1
-#define CFG_PLL0_MUL			7
-#define CFG_PLL0_SUPPRESS_CYCLES	16
+#define CONFIG_SYS_POWER_MANAGER		1
+#define CONFIG_SYS_OSC0_HZ			20000000
+#define CONFIG_SYS_PLL0_DIV			1
+#define CONFIG_SYS_PLL0_MUL			7
+#define CONFIG_SYS_PLL0_SUPPRESS_CYCLES	16
 /*
  * Set the CPU running at:
- * PLL / (2^CFG_CLKDIV_CPU) = CPU MHz
+ * PLL / (2^CONFIG_SYS_CLKDIV_CPU) = CPU MHz
  */
-#define CFG_CLKDIV_CPU			0
+#define CONFIG_SYS_CLKDIV_CPU			0
 /*
  * Set the HSB running at:
- * PLL / (2^CFG_CLKDIV_HSB) = HSB MHz
+ * PLL / (2^CONFIG_SYS_CLKDIV_HSB) = HSB MHz
  */
-#define CFG_CLKDIV_HSB			1
+#define CONFIG_SYS_CLKDIV_HSB			1
 /*
  * Set the PBA running at:
- * PLL / (2^CFG_CLKDIV_PBA) = PBA MHz
+ * PLL / (2^CONFIG_SYS_CLKDIV_PBA) = PBA MHz
  */
-#define CFG_CLKDIV_PBA			2
+#define CONFIG_SYS_CLKDIV_PBA			2
 /*
  * Set the PBB running at:
- * PLL / (2^CFG_CLKDIV_PBB) = PBB MHz
+ * PLL / (2^CONFIG_SYS_CLKDIV_PBB) = PBB MHz
  */
-#define CFG_CLKDIV_PBB			1
+#define CONFIG_SYS_CLKDIV_PBB			1
 
 /*
  * The PLLOPT register controls the PLL like this:
@@ -80,7 +80,7 @@
  *
  * We want icp=1 (default) and ivco=0 (80-160 MHz) or ivco=2 (150-240MHz).
  */
-#define CFG_PLL0_OPT			0x04
+#define CONFIG_SYS_PLL0_OPT			0x04
 
 #undef CONFIG_USART0
 #define CONFIG_USART1			1
@@ -150,55 +150,55 @@
 #define CONFIG_ATMEL_USART		1
 #define CONFIG_MACB			1
 #define CONFIG_PORTMUX_PIO		1
-#define CFG_NR_PIOS			5
-#define CFG_HSDRAMC			1
+#define CONFIG_SYS_NR_PIOS			5
+#define CONFIG_SYS_HSDRAMC			1
 #define CONFIG_MMC			1
 #define CONFIG_ATMEL_MCI		1
 
-#define CFG_DCACHE_LINESZ		32
-#define CFG_ICACHE_LINESZ		32
+#define CONFIG_SYS_DCACHE_LINESZ		32
+#define CONFIG_SYS_ICACHE_LINESZ		32
 
 #define CONFIG_NR_DRAM_BANKS		1
 
 /* External flash on STK1000 */
 #if 0
-#define CFG_FLASH_CFI			1
+#define CONFIG_SYS_FLASH_CFI			1
 #define CONFIG_FLASH_CFI_DRIVER		1
 #endif
 
-#define CFG_FLASH_BASE			0x00000000
-#define CFG_FLASH_SIZE			0x800000
-#define CFG_MAX_FLASH_BANKS		1
-#define CFG_MAX_FLASH_SECT		135
+#define CONFIG_SYS_FLASH_BASE			0x00000000
+#define CONFIG_SYS_FLASH_SIZE			0x800000
+#define CONFIG_SYS_MAX_FLASH_BANKS		1
+#define CONFIG_SYS_MAX_FLASH_SECT		135
 
-#define CFG_MONITOR_BASE		CFG_FLASH_BASE
+#define CONFIG_SYS_MONITOR_BASE		CONFIG_SYS_FLASH_BASE
 
-#define CFG_INTRAM_BASE			INTERNAL_SRAM_BASE
-#define CFG_INTRAM_SIZE			INTERNAL_SRAM_SIZE
-#define CFG_SDRAM_BASE			EBI_SDRAM_BASE
+#define CONFIG_SYS_INTRAM_BASE			INTERNAL_SRAM_BASE
+#define CONFIG_SYS_INTRAM_SIZE			INTERNAL_SRAM_SIZE
+#define CONFIG_SYS_SDRAM_BASE			EBI_SDRAM_BASE
 
-#define CFG_ENV_IS_IN_FLASH		1
-#define CFG_ENV_SIZE			65536
-#define CFG_ENV_ADDR			(CFG_FLASH_BASE + CFG_FLASH_SIZE - CFG_ENV_SIZE)
+#define CONFIG_ENV_IS_IN_FLASH		1
+#define CONFIG_ENV_SIZE			65536
+#define CONFIG_ENV_ADDR			(CONFIG_SYS_FLASH_BASE + CONFIG_SYS_FLASH_SIZE - CONFIG_ENV_SIZE)
 
-#define CFG_INIT_SP_ADDR		(CFG_INTRAM_BASE + CFG_INTRAM_SIZE)
+#define CONFIG_SYS_INIT_SP_ADDR		(CONFIG_SYS_INTRAM_BASE + CONFIG_SYS_INTRAM_SIZE)
 
-#define CFG_MALLOC_LEN			(256*1024)
-#define CFG_DMA_ALLOC_LEN		(16384)
+#define CONFIG_SYS_MALLOC_LEN			(256*1024)
+#define CONFIG_SYS_DMA_ALLOC_LEN		(16384)
 
 /* Allow 4MB for the kernel run-time image */
-#define CFG_LOAD_ADDR			(EBI_SDRAM_BASE + 0x00400000)
-#define CFG_BOOTPARAMS_LEN		(16 * 1024)
+#define CONFIG_SYS_LOAD_ADDR			(EBI_SDRAM_BASE + 0x00400000)
+#define CONFIG_SYS_BOOTPARAMS_LEN		(16 * 1024)
 
 /* Other configuration settings that shouldn't have to change all that often */
-#define CFG_PROMPT			"U-Boot> "
-#define CFG_CBSIZE			256
-#define CFG_MAXARGS			16
-#define CFG_PBSIZE			(CFG_CBSIZE + sizeof(CFG_PROMPT) + 16)
-#define CFG_LONGHELP			1
-
-#define CFG_MEMTEST_START		EBI_SDRAM_BASE
-#define CFG_MEMTEST_END			(CFG_MEMTEST_START + 0x3f00000)
-#define CFG_BAUDRATE_TABLE { 115200, 38400, 19200, 9600, 2400 }
+#define CONFIG_SYS_PROMPT			"U-Boot> "
+#define CONFIG_SYS_CBSIZE			256
+#define CONFIG_SYS_MAXARGS			16
+#define CONFIG_SYS_PBSIZE			(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
+#define CONFIG_SYS_LONGHELP			1
+
+#define CONFIG_SYS_MEMTEST_START		EBI_SDRAM_BASE
+#define CONFIG_SYS_MEMTEST_END			(CONFIG_SYS_MEMTEST_START + 0x3f00000)
+#define CONFIG_SYS_BAUDRATE_TABLE { 115200, 38400, 19200, 9600, 2400 }
 
 #endif /* __CONFIG_H */
diff --git a/include/configs/bamboo.h b/include/configs/bamboo.h
index 41058f88c..f3ffe1cca 100644
--- a/include/configs/bamboo.h
+++ b/include/configs/bamboo.h
@@ -55,37 +55,37 @@
  * Base addresses -- Note these are effective addresses where the
  * actual resources get mapped (not physical addresses)
  *----------------------------------------------------------------------*/
-#define CFG_FLASH_BASE	        0xfff00000	    /* start of FLASH	*/
-#define CFG_PCI_MEMBASE	        0xa0000000	    /* mapped pci memory*/
-#define CFG_PCI_MEMBASE1        CFG_PCI_MEMBASE  + 0x10000000
-#define CFG_PCI_MEMBASE2        CFG_PCI_MEMBASE1 + 0x10000000
-#define CFG_PCI_MEMBASE3        CFG_PCI_MEMBASE2 + 0x10000000
+#define CONFIG_SYS_FLASH_BASE	        0xfff00000	    /* start of FLASH	*/
+#define CONFIG_SYS_PCI_MEMBASE	        0xa0000000	    /* mapped pci memory*/
+#define CONFIG_SYS_PCI_MEMBASE1        CONFIG_SYS_PCI_MEMBASE  + 0x10000000
+#define CONFIG_SYS_PCI_MEMBASE2        CONFIG_SYS_PCI_MEMBASE1 + 0x10000000
+#define CONFIG_SYS_PCI_MEMBASE3        CONFIG_SYS_PCI_MEMBASE2 + 0x10000000
 
 /*Don't change either of these*/
-#define CFG_PERIPHERAL_BASE     0xef600000	    /* internal peripherals*/
-#define CFG_PCI_BASE	        0xe0000000	    /* internal PCI regs*/
+#define CONFIG_SYS_PERIPHERAL_BASE     0xef600000	    /* internal peripherals*/
+#define CONFIG_SYS_PCI_BASE	        0xe0000000	    /* internal PCI regs*/
 /*Don't change either of these*/
 
-#define CFG_USB_DEVICE          0x50000000
-#define CFG_NVRAM_BASE_ADDR     0x80000000
-#define CFG_BOOT_BASE_ADDR      0xf0000000
-#define CFG_NAND_ADDR           0x90000000
-#define CFG_NAND2_ADDR          0x94000000
+#define CONFIG_SYS_USB_DEVICE          0x50000000
+#define CONFIG_SYS_NVRAM_BASE_ADDR     0x80000000
+#define CONFIG_SYS_BOOT_BASE_ADDR      0xf0000000
+#define CONFIG_SYS_NAND_ADDR           0x90000000
+#define CONFIG_SYS_NAND2_ADDR          0x94000000
 
 /*-----------------------------------------------------------------------
  * Initial RAM & stack pointer (placed in SDRAM)
  *----------------------------------------------------------------------*/
-#define CFG_INIT_RAM_DCACHE	1		/* d-cache as init ram	*/
-#define CFG_INIT_RAM_ADDR	0x70000000	/* DCache       */
-#define CFG_INIT_RAM_END	(4 << 10)
-#define CFG_GBL_DATA_SIZE	256		/* num bytes initial data	*/
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_INIT_RAM_DCACHE	1		/* d-cache as init ram	*/
+#define CONFIG_SYS_INIT_RAM_ADDR	0x70000000	/* DCache       */
+#define CONFIG_SYS_INIT_RAM_END	(4 << 10)
+#define CONFIG_SYS_GBL_DATA_SIZE	256		/* num bytes initial data	*/
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
 /*-----------------------------------------------------------------------
  * Serial Port
  *----------------------------------------------------------------------*/
-#define CFG_EXT_SERIAL_CLOCK	11059200 /* use external 11.059MHz clk	*/
+#define CONFIG_SYS_EXT_SERIAL_CLOCK	11059200 /* use external 11.059MHz clk	*/
 /* define this if you want console on UART1 */
 #undef CONFIG_UART1_CONSOLE
 
@@ -96,45 +96,45 @@
  * The DS1558 code assumes this condition
  *
  *----------------------------------------------------------------------*/
-#define CFG_NVRAM_SIZE	        (0x2000 - 0x10) /* NVRAM size(8k)- RTC regs     */
+#define CONFIG_SYS_NVRAM_SIZE	        (0x2000 - 0x10) /* NVRAM size(8k)- RTC regs     */
 #define CONFIG_RTC_DS1556	1		         /* DS1556 RTC		*/
 
 /*-----------------------------------------------------------------------
  * Environment
  *----------------------------------------------------------------------*/
 #if !defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL)
-#define CFG_ENV_IS_IN_FLASH     1	/* use FLASH for environment vars	*/
+#define CONFIG_ENV_IS_IN_FLASH     1	/* use FLASH for environment vars	*/
 #else
-#define CFG_ENV_IS_IN_NAND	1	/* use NAND for environment vars	*/
-#define CFG_ENV_IS_EMBEDDED	1	/* use embedded environment */
+#define CONFIG_ENV_IS_IN_NAND	1	/* use NAND for environment vars	*/
+#define CONFIG_ENV_IS_EMBEDDED	1	/* use embedded environment */
 #endif
 
 /*-----------------------------------------------------------------------
  * FLASH related
  *----------------------------------------------------------------------*/
-#define CFG_MAX_FLASH_BANKS	3	/* number of banks			*/
-#define CFG_MAX_FLASH_SECT	256	/* sectors per device			*/
+#define CONFIG_SYS_MAX_FLASH_BANKS	3	/* number of banks			*/
+#define CONFIG_SYS_MAX_FLASH_SECT	256	/* sectors per device			*/
 
-#undef	CFG_FLASH_CHECKSUM
-#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
-#define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
+#undef	CONFIG_SYS_FLASH_CHECKSUM
+#define CONFIG_SYS_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
+#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
 
-#define CFG_FLASH_ADDR0         0x555
-#define CFG_FLASH_ADDR1         0x2aa
-#define CFG_FLASH_WORD_SIZE     unsigned char
+#define CONFIG_SYS_FLASH_ADDR0         0x555
+#define CONFIG_SYS_FLASH_ADDR1         0x2aa
+#define CONFIG_SYS_FLASH_WORD_SIZE     unsigned char
 
-#define CFG_FLASH_2ND_16BIT_DEV 1	/* bamboo has 8 and 16bit device	*/
-#define CFG_FLASH_2ND_ADDR      0x87800000  /* bamboo has 8 and 16bit device	*/
+#define CONFIG_SYS_FLASH_2ND_16BIT_DEV 1	/* bamboo has 8 and 16bit device	*/
+#define CONFIG_SYS_FLASH_2ND_ADDR      0x87800000  /* bamboo has 8 and 16bit device	*/
 
-#ifdef CFG_ENV_IS_IN_FLASH
-#define CFG_ENV_SECT_SIZE	0x10000	/* size of one complete sector		*/
-#define CFG_ENV_ADDR		((-CFG_MONITOR_LEN)-CFG_ENV_SECT_SIZE)
-#define	CFG_ENV_SIZE		0x2000	/* Total Size of Environment Sector	*/
+#ifdef CONFIG_ENV_IS_IN_FLASH
+#define CONFIG_ENV_SECT_SIZE	0x10000	/* size of one complete sector		*/
+#define CONFIG_ENV_ADDR		((-CONFIG_SYS_MONITOR_LEN)-CONFIG_ENV_SECT_SIZE)
+#define	CONFIG_ENV_SIZE		0x2000	/* Total Size of Environment Sector	*/
 
 /* Address and size of Redundant Environment Sector	*/
-#define CFG_ENV_ADDR_REDUND	(CFG_ENV_ADDR-CFG_ENV_SECT_SIZE)
-#define CFG_ENV_SIZE_REDUND	(CFG_ENV_SIZE)
-#endif /* CFG_ENV_IS_IN_FLASH */
+#define CONFIG_ENV_ADDR_REDUND	(CONFIG_ENV_ADDR-CONFIG_ENV_SECT_SIZE)
+#define CONFIG_ENV_SIZE_REDUND	(CONFIG_ENV_SIZE)
+#endif /* CONFIG_ENV_IS_IN_FLASH */
 
 /*
  * IPL (Initial Program Loader, integrated inside CPU)
@@ -154,61 +154,61 @@
  * set up. While still running from cache, I experienced problems accessing
  * the NAND controller.	sr - 2006-08-25
  */
-#define CFG_NAND_BOOT_SPL_SRC	0xfffff000	/* SPL location			*/
-#define CFG_NAND_BOOT_SPL_SIZE	(4 << 10)	/* SPL size			*/
-#define CFG_NAND_BOOT_SPL_DST	0x00800000	/* Copy SPL here		*/
-#define CFG_NAND_U_BOOT_DST	0x01000000	/* Load NUB to this addr	*/
-#define CFG_NAND_U_BOOT_START	CFG_NAND_U_BOOT_DST /* Start NUB from this addr	*/
-#define CFG_NAND_BOOT_SPL_DELTA	(CFG_NAND_BOOT_SPL_SRC - CFG_NAND_BOOT_SPL_DST)
+#define CONFIG_SYS_NAND_BOOT_SPL_SRC	0xfffff000	/* SPL location			*/
+#define CONFIG_SYS_NAND_BOOT_SPL_SIZE	(4 << 10)	/* SPL size			*/
+#define CONFIG_SYS_NAND_BOOT_SPL_DST	0x00800000	/* Copy SPL here		*/
+#define CONFIG_SYS_NAND_U_BOOT_DST	0x01000000	/* Load NUB to this addr	*/
+#define CONFIG_SYS_NAND_U_BOOT_START	CONFIG_SYS_NAND_U_BOOT_DST /* Start NUB from this addr	*/
+#define CONFIG_SYS_NAND_BOOT_SPL_DELTA	(CONFIG_SYS_NAND_BOOT_SPL_SRC - CONFIG_SYS_NAND_BOOT_SPL_DST)
 
 /*
  * Define the partitioning of the NAND chip (only RAM U-Boot is needed here)
  */
-#define CFG_NAND_U_BOOT_OFFS	(16 << 10)	/* Offset to RAM U-Boot image	*/
-#define CFG_NAND_U_BOOT_SIZE	(384 << 10)	/* Size of RAM U-Boot image	*/
+#define CONFIG_SYS_NAND_U_BOOT_OFFS	(16 << 10)	/* Offset to RAM U-Boot image	*/
+#define CONFIG_SYS_NAND_U_BOOT_SIZE	(384 << 10)	/* Size of RAM U-Boot image	*/
 
 /*
  * Now the NAND chip has to be defined (no autodetection used!)
  */
-#define CFG_NAND_PAGE_SIZE	512		/* NAND chip page size		*/
-#define CFG_NAND_BLOCK_SIZE	(16 << 10)	/* NAND chip block size		*/
-#define CFG_NAND_PAGE_COUNT	32		/* NAND chip page count		*/
-#define CFG_NAND_BAD_BLOCK_POS	5		/* Location of bad block marker	*/
-#define CFG_NAND_4_ADDR_CYCLE	1		/* Fourth addr used (>32MB)	*/
-
-#define CFG_NAND_ECCSIZE	256
-#define CFG_NAND_ECCBYTES	3
-#define CFG_NAND_ECCSTEPS	(CFG_NAND_PAGE_SIZE / CFG_NAND_ECCSIZE)
-#define CFG_NAND_OOBSIZE	16
-#define CFG_NAND_ECCTOTAL	(CFG_NAND_ECCBYTES * CFG_NAND_ECCSTEPS)
-#define CFG_NAND_ECCPOS		{0, 1, 2, 3, 6, 7}
-
-#ifdef CFG_ENV_IS_IN_NAND
+#define CONFIG_SYS_NAND_PAGE_SIZE	512		/* NAND chip page size		*/
+#define CONFIG_SYS_NAND_BLOCK_SIZE	(16 << 10)	/* NAND chip block size		*/
+#define CONFIG_SYS_NAND_PAGE_COUNT	32		/* NAND chip page count		*/
+#define CONFIG_SYS_NAND_BAD_BLOCK_POS	5		/* Location of bad block marker	*/
+#define CONFIG_SYS_NAND_4_ADDR_CYCLE	1		/* Fourth addr used (>32MB)	*/
+
+#define CONFIG_SYS_NAND_ECCSIZE	256
+#define CONFIG_SYS_NAND_ECCBYTES	3
+#define CONFIG_SYS_NAND_ECCSTEPS	(CONFIG_SYS_NAND_PAGE_SIZE / CONFIG_SYS_NAND_ECCSIZE)
+#define CONFIG_SYS_NAND_OOBSIZE	16
+#define CONFIG_SYS_NAND_ECCTOTAL	(CONFIG_SYS_NAND_ECCBYTES * CONFIG_SYS_NAND_ECCSTEPS)
+#define CONFIG_SYS_NAND_ECCPOS		{0, 1, 2, 3, 6, 7}
+
+#ifdef CONFIG_ENV_IS_IN_NAND
 /*
  * For NAND booting the environment is embedded in the U-Boot image. Please take
  * look at the file board/amcc/sequoia/u-boot-nand.lds for details.
  */
-#define CFG_ENV_SIZE		CFG_NAND_BLOCK_SIZE
-#define CFG_ENV_OFFSET		(CFG_NAND_U_BOOT_OFFS + CFG_ENV_SIZE)
-#define CFG_ENV_OFFSET_REDUND	(CFG_ENV_OFFSET + CFG_ENV_SIZE)
+#define CONFIG_ENV_SIZE		CONFIG_SYS_NAND_BLOCK_SIZE
+#define CONFIG_ENV_OFFSET		(CONFIG_SYS_NAND_U_BOOT_OFFS + CONFIG_ENV_SIZE)
+#define CONFIG_ENV_OFFSET_REDUND	(CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)
 #endif
 
 /*-----------------------------------------------------------------------
  * NAND FLASH
  *----------------------------------------------------------------------*/
-#define CFG_MAX_NAND_DEVICE	2
-#define NAND_MAX_CHIPS		CFG_MAX_NAND_DEVICE
-#define CFG_NAND_BASE		(CFG_NAND_ADDR + CFG_NAND_CS)
-#define CFG_NAND_BASE_LIST	{ CFG_NAND_BASE, CFG_NAND_ADDR + 2 }
-#define CFG_NAND_SELECT_DEVICE  1	/* nand driver supports mutipl. chips	*/
+#define CONFIG_SYS_MAX_NAND_DEVICE	2
+#define NAND_MAX_CHIPS		CONFIG_SYS_MAX_NAND_DEVICE
+#define CONFIG_SYS_NAND_BASE		(CONFIG_SYS_NAND_ADDR + CONFIG_SYS_NAND_CS)
+#define CONFIG_SYS_NAND_BASE_LIST	{ CONFIG_SYS_NAND_BASE, CONFIG_SYS_NAND_ADDR + 2 }
+#define CONFIG_SYS_NAND_SELECT_DEVICE  1	/* nand driver supports mutipl. chips	*/
 
 #if !defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL)
-#define CFG_NAND_CS		1
+#define CONFIG_SYS_NAND_CS		1
 #else
-#define CFG_NAND_CS		0		/* NAND chip connected to CSx	*/
+#define CONFIG_SYS_NAND_CS		0		/* NAND chip connected to CSx	*/
 /* Memory Bank 0 (NAND-FLASH) initialization					*/
-#define CFG_EBC_PB0AP		0x018003c0
-#define CFG_EBC_PB0CR		(CFG_NAND_ADDR | 0x1c000)
+#define CONFIG_SYS_EBC_PB0AP		0x018003c0
+#define CONFIG_SYS_EBC_PB0CR		(CONFIG_SYS_NAND_ADDR | 0x1c000)
 #endif
 
 /*-----------------------------------------------------------------------
@@ -216,27 +216,26 @@
  *----------------------------------------------------------------------------- */
 #define CONFIG_SPD_EEPROM               /* Use SPD EEPROM for setup             */
 #undef CONFIG_DDR_ECC			/* don't use ECC			*/
-#define CFG_SIMULATE_SPD_EEPROM	0xff	/* simulate spd eeprom on this address	*/
-#define SPD_EEPROM_ADDRESS	{CFG_SIMULATE_SPD_EEPROM, 0x50, 0x51}
-#define CFG_MBYTES_SDRAM	(64)	/* 64MB fixed size for early-sdram-init */
+#define CONFIG_SYS_SIMULATE_SPD_EEPROM	0xff	/* simulate spd eeprom on this address	*/
+#define SPD_EEPROM_ADDRESS	{CONFIG_SYS_SIMULATE_SPD_EEPROM, 0x50, 0x51}
+#define CONFIG_SYS_MBYTES_SDRAM	(64)	/* 64MB fixed size for early-sdram-init */
 #define CONFIG_PROG_SDRAM_TLB
 
 /*-----------------------------------------------------------------------
  * I2C
  *----------------------------------------------------------------------*/
-#define CFG_I2C_SPEED		400000	/* I2C speed and slave address	*/
+#define CONFIG_SYS_I2C_SPEED		400000	/* I2C speed and slave address	*/
 
-#define CFG_I2C_MULTI_EEPROMS
-#define CFG_I2C_EEPROM_ADDR	(0xa8>>1)
-#define CFG_I2C_EEPROM_ADDR_LEN 1
-#define CFG_EEPROM_PAGE_WRITE_ENABLE
-#define CFG_EEPROM_PAGE_WRITE_BITS 3
-#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10
+#define CONFIG_SYS_I2C_MULTI_EEPROMS
+#define CONFIG_SYS_I2C_EEPROM_ADDR	(0xa8>>1)
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10
 
-#ifdef CFG_ENV_IS_IN_EEPROM
-#define CFG_ENV_SIZE		0x200	    /* Size of Environment vars */
-#define CFG_ENV_OFFSET		0x0
-#endif /* CFG_ENV_IS_IN_EEPROM */
+#ifdef CONFIG_ENV_IS_IN_EEPROM
+#define CONFIG_ENV_SIZE		0x200	    /* Size of Environment vars */
+#define CONFIG_ENV_OFFSET		0x0
+#endif /* CONFIG_ENV_IS_IN_EEPROM */
 
 /*
  * Default environment variables
@@ -298,13 +297,13 @@
 #define CONFIG_PCI			/* include pci support	        */
 #undef  CONFIG_PCI_PNP			/* do (not) pci plug-and-play   */
 #define CONFIG_PCI_SCAN_SHOW            /* show pci devices on startup  */
-#define CFG_PCI_TARGBASE        0x80000000 /* PCIaddr mapped to CFG_PCI_MEMBASE*/
+#define CONFIG_SYS_PCI_TARGBASE        0x80000000 /* PCIaddr mapped to CONFIG_SYS_PCI_MEMBASE*/
 
 /* Board-specific PCI */
-#define CFG_PCI_TARGET_INIT
-#define CFG_PCI_MASTER_INIT
+#define CONFIG_SYS_PCI_TARGET_INIT
+#define CONFIG_SYS_PCI_MASTER_INIT
 
-#define CFG_PCI_SUBSYS_VENDORID 0x10e8	/* AMCC */
-#define CFG_PCI_SUBSYS_ID       0xcafe	/* Whatever */
+#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x10e8	/* AMCC */
+#define CONFIG_SYS_PCI_SUBSYS_ID       0xcafe	/* Whatever */
 
 #endif	/* __CONFIG_H */
diff --git a/include/configs/barco.h b/include/configs/barco.h
index 4f57067db..e00f84aab 100644
--- a/include/configs/barco.h
+++ b/include/configs/barco.h
@@ -102,14 +102,14 @@
 /*
  * Miscellaneous configurable options
  */
-#define CFG_LONGHELP		1		/* undef to save memory		*/
-#define CFG_PROMPT		"=> "		/* Monitor Command Prompt	*/
-#define CFG_CBSIZE		256		/* Console I/O Buffer Size	*/
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16)	/* Print Buffer Size	*/
-#define CFG_MAXARGS		16		/* max number of command args	*/
-#define CFG_BARGSIZE		CFG_CBSIZE	/* Boot Argument Buffer Size	*/
-#define CFG_LOAD_ADDR		0x00100000	/* default load address		*/
-#define CFG_HZ			1000		/* decrementer freq: 1 ms ticks */
+#define CONFIG_SYS_LONGHELP		1		/* undef to save memory		*/
+#define CONFIG_SYS_PROMPT		"=> "		/* Monitor Command Prompt	*/
+#define CONFIG_SYS_CBSIZE		256		/* Console I/O Buffer Size	*/
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)	/* Print Buffer Size	*/
+#define CONFIG_SYS_MAXARGS		16		/* max number of command args	*/
+#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
+#define CONFIG_SYS_LOAD_ADDR		0x00100000	/* default load address		*/
+#define CONFIG_SYS_HZ			1000		/* decrementer freq: 1 ms ticks */
 
 
 /*-----------------------------------------------------------------------
@@ -128,58 +128,58 @@
 /*-----------------------------------------------------------------------
  * Start addresses for the final memory configuration
  * (Set up by the startup code)
- * Please note that CFG_SDRAM_BASE _must_ start at 0
+ * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
  */
-#define CFG_SDRAM_BASE		0x00000000
-#define CFG_MAX_RAM_SIZE	0x02000000
+#define CONFIG_SYS_SDRAM_BASE		0x00000000
+#define CONFIG_SYS_MAX_RAM_SIZE	0x02000000
 
 #define CONFIG_LOGBUFFER
 #ifdef	CONFIG_LOGBUFFER
-#define CFG_STDOUT_ADDR		0x1FFC000
+#define CONFIG_SYS_STDOUT_ADDR		0x1FFC000
 #else
-#define CFG_STDOUT_ADDR		0x2B9000
+#define CONFIG_SYS_STDOUT_ADDR		0x2B9000
 #endif
 
-#define CFG_RESET_ADDRESS	0xFFF00100
+#define CONFIG_SYS_RESET_ADDRESS	0xFFF00100
 
 #if defined (USE_DINK32)
-#define CFG_MONITOR_LEN		0x00030000
-#define CFG_MONITOR_BASE	0x00090000
-#define CFG_RAMBOOT		1
-#define CFG_INIT_RAM_ADDR	(CFG_MONITOR_BASE + CFG_MONITOR_LEN)
-#define CFG_INIT_RAM_END	0x10000
-#define CFG_GBL_DATA_SIZE	256  /* size in bytes reserved for initial data */
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_MONITOR_LEN		0x00030000
+#define CONFIG_SYS_MONITOR_BASE	0x00090000
+#define CONFIG_SYS_RAMBOOT		1
+#define CONFIG_SYS_INIT_RAM_ADDR	(CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)
+#define CONFIG_SYS_INIT_RAM_END	0x10000
+#define CONFIG_SYS_GBL_DATA_SIZE	256  /* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 #else
-#undef	CFG_RAMBOOT
-#define CFG_MONITOR_LEN		0x00030000
-#define CFG_MONITOR_BASE	TEXT_BASE
+#undef	CONFIG_SYS_RAMBOOT
+#define CONFIG_SYS_MONITOR_LEN		0x00030000
+#define CONFIG_SYS_MONITOR_BASE	TEXT_BASE
 
-#define CFG_GBL_DATA_SIZE	128
+#define CONFIG_SYS_GBL_DATA_SIZE	128
 
-#define CFG_INIT_RAM_ADDR	0x40000000
-#define CFG_INIT_RAM_END	0x1000
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_RAM_ADDR	0x40000000
+#define CONFIG_SYS_INIT_RAM_END	0x1000
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
 
 #endif
 
-#define CFG_FLASH_BASE		0xFFF00000
-#define CFG_FLASH_SIZE		(8 * 1024 * 1024)	/* Unity has onboard 1MByte flash */
-#define CFG_ENV_IS_IN_FLASH	1
-#define CFG_ENV_OFFSET		0x000047A4	/* Offset of Environment Sector */
-#define CFG_ENV_SIZE		0x00002000	/* Total Size of Environment Sector */
+#define CONFIG_SYS_FLASH_BASE		0xFFF00000
+#define CONFIG_SYS_FLASH_SIZE		(8 * 1024 * 1024)	/* Unity has onboard 1MByte flash */
+#define CONFIG_ENV_IS_IN_FLASH	1
+#define CONFIG_ENV_OFFSET		0x000047A4	/* Offset of Environment Sector */
+#define CONFIG_ENV_SIZE		0x00002000	/* Total Size of Environment Sector */
 /* #define ENV_CRC		0x8BF6F24B	XXX - FIXME: gets defined automatically */
 
-#define CFG_MALLOC_LEN		(512 << 10)	/* Reserve 512 kB for malloc()	*/
+#define CONFIG_SYS_MALLOC_LEN		(512 << 10)	/* Reserve 512 kB for malloc()	*/
 
-#define CFG_MEMTEST_START	0x00000000	/* memtest works on		*/
-#define CFG_MEMTEST_END		0x04000000	/* 0 ... 32 MB in DRAM		*/
+#define CONFIG_SYS_MEMTEST_START	0x00000000	/* memtest works on		*/
+#define CONFIG_SYS_MEMTEST_END		0x04000000	/* 0 ... 32 MB in DRAM		*/
 
-#define CFG_EUMB_ADDR		0xFDF00000
+#define CONFIG_SYS_EUMB_ADDR		0xFDF00000
 
-#define CFG_FLASH_RANGE_BASE	0xFFC00000	/* flash memory address range	*/
-#define CFG_FLASH_RANGE_SIZE	0x00400000
+#define CONFIG_SYS_FLASH_RANGE_BASE	0xFFC00000	/* flash memory address range	*/
+#define CONFIG_SYS_FLASH_RANGE_SIZE	0x00400000
 #define FLASH_BASE0_PRELIM	0xFFF00000	/* sandpoint flash		*/
 #define FLASH_BASE1_PRELIM	0xFF000000	/* PMC onboard flash		*/
 
@@ -192,8 +192,8 @@
  */
 #define CONFIG_HARD_I2C		1		/* To enable I2C support	*/
 #undef  CONFIG_SOFT_I2C				/* I2C bit-banged		*/
-#define CFG_I2C_SPEED		400000		/* I2C speed and slave address	*/
-#define CFG_I2C_SLAVE		0x7F
+#define CONFIG_SYS_I2C_SPEED		400000		/* I2C speed and slave address	*/
+#define CONFIG_SYS_I2C_SLAVE		0x7F
 
 #ifdef CONFIG_SOFT_I2C
 #error "Soft I2C is not configured properly.  Please review!"
@@ -208,14 +208,14 @@
 #define I2C_DELAY		udelay(5)	/* 1/4 I2C clock duration */
 #endif /* CONFIG_SOFT_I2C */
 
-#define CFG_I2C_EEPROM_ADDR	0x57		/* EEPROM IS24C02		*/
-#define CFG_I2C_EEPROM_ADDR_LEN	1		/* Bytes of address		*/
-#define CFG_EEPROM_PAGE_WRITE_BITS	3
-#define CFG_EEPROM_PAGE_WRITE_DELAY_MS	10	/* and takes up to 10 msec */
+#define CONFIG_SYS_I2C_EEPROM_ADDR	0x57		/* EEPROM IS24C02		*/
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN	1		/* Bytes of address		*/
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS	3
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	10	/* and takes up to 10 msec */
 
-#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
-#define CFG_FLASH_BANKS		{ FLASH_BASE0_PRELIM , FLASH_BASE1_PRELIM }
-#define CFG_DBUS_SIZE2		1
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+#define CONFIG_SYS_FLASH_BANKS		{ FLASH_BASE0_PRELIM , FLASH_BASE1_PRELIM }
+#define CONFIG_SYS_DBUS_SIZE2		1
 
 /*-----------------------------------------------------------------------
  * Definitions for initial stack pointer and data area (in DPRAM)
@@ -233,24 +233,24 @@
 
 #define CONFIG_SYS_CLK_FREQ  33333333	/* external frequency to pll */
 
-#define CFG_ROMNAL		0x0F	/*rom/flash next access time		*/
-#define CFG_ROMFAL		0x1E	/*rom/flash access time			*/
+#define CONFIG_SYS_ROMNAL		0x0F	/*rom/flash next access time		*/
+#define CONFIG_SYS_ROMFAL		0x1E	/*rom/flash access time			*/
 
-#define CFG_REFINT	0x8F	/* no of clock cycles between CBR refresh cycles */
+#define CONFIG_SYS_REFINT	0x8F	/* no of clock cycles between CBR refresh cycles */
 
 /* the following are for SDRAM only*/
-#define CFG_BSTOPRE	0x25C	/* Burst To Precharge, sets open page interval */
-#define CFG_REFREC		8	/* Refresh to activate interval		*/
-#define CFG_RDLAT		4	/* data latency from read command	*/
-#define CFG_PRETOACT		3	/* Precharge to activate interval	*/
-#define CFG_ACTTOPRE		5	/* Activate to Precharge interval	*/
-#define CFG_ACTORW		2	/* Activate to R/W			*/
-#define CFG_SDMODE_CAS_LAT	3	/* SDMODE CAS latency			*/
-#define CFG_SDMODE_WRAP		0	/* SDMODE wrap type			*/
+#define CONFIG_SYS_BSTOPRE	0x25C	/* Burst To Precharge, sets open page interval */
+#define CONFIG_SYS_REFREC		8	/* Refresh to activate interval		*/
+#define CONFIG_SYS_RDLAT		4	/* data latency from read command	*/
+#define CONFIG_SYS_PRETOACT		3	/* Precharge to activate interval	*/
+#define CONFIG_SYS_ACTTOPRE		5	/* Activate to Precharge interval	*/
+#define CONFIG_SYS_ACTORW		2	/* Activate to R/W			*/
+#define CONFIG_SYS_SDMODE_CAS_LAT	3	/* SDMODE CAS latency			*/
+#define CONFIG_SYS_SDMODE_WRAP		0	/* SDMODE wrap type			*/
 
-#define CFG_REGISTERD_TYPE_BUFFER   1
-#define CFG_EXTROM 0
-#define CFG_REGDIMM 0
+#define CONFIG_SYS_REGISTERD_TYPE_BUFFER   1
+#define CONFIG_SYS_EXTROM 0
+#define CONFIG_SYS_REGDIMM 0
 
 
 /* memory bank settings*/
@@ -260,95 +260,95 @@
  * bits will be set to 0x00000 for a start address, or 0xfffff for an
  * end address
  */
-#define CFG_BANK0_START		0x00000000
-#define CFG_BANK0_END		0x01FFFFFF
-#define CFG_BANK0_ENABLE	1
-#define CFG_BANK1_START		0x02000000
-#define CFG_BANK1_END		0x02ffffff
-#define CFG_BANK1_ENABLE	0
-#define CFG_BANK2_START		0x03f00000
-#define CFG_BANK2_END		0x03ffffff
-#define CFG_BANK2_ENABLE	0
-#define CFG_BANK3_START		0x04000000
-#define CFG_BANK3_END		0x04ffffff
-#define CFG_BANK3_ENABLE	0
-#define CFG_BANK4_START		0x05000000
-#define CFG_BANK4_END		0x05FFFFFF
-#define CFG_BANK4_ENABLE	0
-#define CFG_BANK5_START		0x06000000
-#define CFG_BANK5_END		0x06FFFFFF
-#define CFG_BANK5_ENABLE	0
-#define CFG_BANK6_START		0x07000000
-#define CFG_BANK6_END		0x07FFFFFF
-#define CFG_BANK6_ENABLE	0
-#define CFG_BANK7_START		0x08000000
-#define CFG_BANK7_END		0x08FFFFFF
-#define CFG_BANK7_ENABLE	0
+#define CONFIG_SYS_BANK0_START		0x00000000
+#define CONFIG_SYS_BANK0_END		0x01FFFFFF
+#define CONFIG_SYS_BANK0_ENABLE	1
+#define CONFIG_SYS_BANK1_START		0x02000000
+#define CONFIG_SYS_BANK1_END		0x02ffffff
+#define CONFIG_SYS_BANK1_ENABLE	0
+#define CONFIG_SYS_BANK2_START		0x03f00000
+#define CONFIG_SYS_BANK2_END		0x03ffffff
+#define CONFIG_SYS_BANK2_ENABLE	0
+#define CONFIG_SYS_BANK3_START		0x04000000
+#define CONFIG_SYS_BANK3_END		0x04ffffff
+#define CONFIG_SYS_BANK3_ENABLE	0
+#define CONFIG_SYS_BANK4_START		0x05000000
+#define CONFIG_SYS_BANK4_END		0x05FFFFFF
+#define CONFIG_SYS_BANK4_ENABLE	0
+#define CONFIG_SYS_BANK5_START		0x06000000
+#define CONFIG_SYS_BANK5_END		0x06FFFFFF
+#define CONFIG_SYS_BANK5_ENABLE	0
+#define CONFIG_SYS_BANK6_START		0x07000000
+#define CONFIG_SYS_BANK6_END		0x07FFFFFF
+#define CONFIG_SYS_BANK6_ENABLE	0
+#define CONFIG_SYS_BANK7_START		0x08000000
+#define CONFIG_SYS_BANK7_END		0x08FFFFFF
+#define CONFIG_SYS_BANK7_ENABLE	0
 /*
  * Memory bank enable bitmask, specifying which of the banks defined above
  are actually present. MSB is for bank #7, LSB is for bank #0.
  */
-#define CFG_BANK_ENABLE		0x01
+#define CONFIG_SYS_BANK_ENABLE		0x01
 
-#define CFG_ODCR		0xff	/* configures line driver impedances,	*/
+#define CONFIG_SYS_ODCR		0xff	/* configures line driver impedances,	*/
 					/* see 8240 book for bit definitions	*/
-#define CFG_PGMAX		0x32	/* how long the 8240 retains the	*/
+#define CONFIG_SYS_PGMAX		0x32	/* how long the 8240 retains the	*/
 					/* currently accessed page in memory	*/
 					/* see 8240 book for details		*/
 
 /* SDRAM 0 - 256MB */
-#define CFG_IBAT0L	(CFG_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
-#define CFG_IBAT0U	(CFG_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CONFIG_SYS_IBAT0L	(CONFIG_SYS_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
+#define CONFIG_SYS_IBAT0U	(CONFIG_SYS_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
 
 /* stack in DCACHE @ 1GB (no backing mem) */
 #if defined(USE_DINK32)
-#define CFG_IBAT1L	(0x40000000 | BATL_PP_00 )
-#define CFG_IBAT1U	(0x40000000 | BATU_BL_128K )
+#define CONFIG_SYS_IBAT1L	(0x40000000 | BATL_PP_00 )
+#define CONFIG_SYS_IBAT1U	(0x40000000 | BATU_BL_128K )
 #else
-#define CFG_IBAT1L	(CFG_INIT_RAM_ADDR | BATL_PP_10 | BATL_MEMCOHERENCE)
-#define CFG_IBAT1U	(CFG_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP)
+#define CONFIG_SYS_IBAT1L	(CONFIG_SYS_INIT_RAM_ADDR | BATL_PP_10 | BATL_MEMCOHERENCE)
+#define CONFIG_SYS_IBAT1U	(CONFIG_SYS_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP)
 #endif
 
 /* PCI memory */
-#define CFG_IBAT2L	(0x80000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
-#define CFG_IBAT2U	(0x80000000 | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CONFIG_SYS_IBAT2L	(0x80000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
+#define CONFIG_SYS_IBAT2U	(0x80000000 | BATU_BL_256M | BATU_VS | BATU_VP)
 
 /* Flash, config addrs, etc */
-#define CFG_IBAT3L	(0xF0000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
-#define CFG_IBAT3U	(0xF0000000 | BATU_BL_256M | BATU_VS | BATU_VP)
-
-#define CFG_DBAT0L	CFG_IBAT0L
-#define CFG_DBAT0U	CFG_IBAT0U
-#define CFG_DBAT1L	CFG_IBAT1L
-#define CFG_DBAT1U	CFG_IBAT1U
-#define CFG_DBAT2L	CFG_IBAT2L
-#define CFG_DBAT2U	CFG_IBAT2U
-#define CFG_DBAT3L	CFG_IBAT3L
-#define CFG_DBAT3U	CFG_IBAT3U
+#define CONFIG_SYS_IBAT3L	(0xF0000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
+#define CONFIG_SYS_IBAT3U	(0xF0000000 | BATU_BL_256M | BATU_VS | BATU_VP)
+
+#define CONFIG_SYS_DBAT0L	CONFIG_SYS_IBAT0L
+#define CONFIG_SYS_DBAT0U	CONFIG_SYS_IBAT0U
+#define CONFIG_SYS_DBAT1L	CONFIG_SYS_IBAT1L
+#define CONFIG_SYS_DBAT1U	CONFIG_SYS_IBAT1U
+#define CONFIG_SYS_DBAT2L	CONFIG_SYS_IBAT2L
+#define CONFIG_SYS_DBAT2U	CONFIG_SYS_IBAT2U
+#define CONFIG_SYS_DBAT3L	CONFIG_SYS_IBAT3L
+#define CONFIG_SYS_DBAT3U	CONFIG_SYS_IBAT3U
 
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
+#define CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
 /*-----------------------------------------------------------------------
  * FLASH organization
  */
-#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
-#define CFG_MAX_FLASH_SECT	20	/* max number of sectors on one chip	*/
+#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
+#define CONFIG_SYS_MAX_FLASH_SECT	20	/* max number of sectors on one chip	*/
 
-#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
-#define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
+#define CONFIG_SYS_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
+#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
 
-#define CFG_FLASH_CHECKSUM
+#define CONFIG_SYS_FLASH_CHECKSUM
 
 /*-----------------------------------------------------------------------
  * Cache Configuration
  */
-#define CFG_CACHELINE_SIZE	32	/* For MPC8240 CPU			*/
+#define CONFIG_SYS_CACHELINE_SIZE	32	/* For MPC8240 CPU			*/
 #if defined(CONFIG_CMD_KGDB)
-#  define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value */
+#  define CONFIG_SYS_CACHELINE_SHIFT	5	/* log base 2 of the above value */
 #endif
 
 
diff --git a/include/configs/bf533-ezkit.h b/include/configs/bf533-ezkit.h
index 2f551adca..e87173717 100644
--- a/include/configs/bf533-ezkit.h
+++ b/include/configs/bf533-ezkit.h
@@ -10,9 +10,9 @@
 #define CONFIG_BAUDRATE		57600
 
 #define CONFIG_BOOTDELAY	5
-#define CFG_AUTOLOAD		"no"	/*rarpb, bootp or dhcp commands will perform only a */
+#define CONFIG_SYS_AUTOLOAD		"no"	/*rarpb, bootp or dhcp commands will perform only a */
 
-#define CFG_LONGHELP		1
+#define CONFIG_SYS_LONGHELP		1
 #define CONFIG_CMDLINE_EDITING	1
 #define CONFIG_LOADADDR		0x01000000	/* default load address */
 #define CONFIG_BOOTCOMMAND	"tftp $(loadaddr) linux"
@@ -23,7 +23,7 @@
 
 #if 0
 #define	CONFIG_MII
-#define CFG_DISCOVER_PHY
+#define CONFIG_SYS_DISCOVER_PHY
 #endif
 
 #define CONFIG_RTC_BFIN		1
@@ -105,48 +105,48 @@
 
 #define CONFIG_BOOTARGS "root=/dev/mtdblock0 ip=192.168.0.15:192.168.0.2:192.168.0.1:255.255.255.0:ezkit:eth0:off console=ttyBF0,57600"
 
-#define	CFG_PROMPT		"bfin> "	/* Monitor Command Prompt */
+#define	CONFIG_SYS_PROMPT		"bfin> "	/* Monitor Command Prompt */
 #if defined(CONFIG_CMD_KGDB)
-#define	CFG_CBSIZE		1024	/* Console I/O Buffer Size */
+#define	CONFIG_SYS_CBSIZE		1024	/* Console I/O Buffer Size */
 #else
-#define	CFG_CBSIZE		256	/* Console I/O Buffer Size */
+#define	CONFIG_SYS_CBSIZE		256	/* Console I/O Buffer Size */
 #endif
-#define	CFG_PBSIZE		(CFG_CBSIZE+sizeof(CFG_PROMPT)+16)	/* Print Buffer Size */
-#define	CFG_MAXARGS		16	/* max number of command args */
-#define CFG_BARGSIZE		CFG_CBSIZE	/* Boot Argument Buffer Size */
-#define CFG_MEMTEST_START	0x00000000	/* memtest works on */
-#define CFG_MEMTEST_END		( (CONFIG_MEM_SIZE - 1) * 1024 * 1024)	/* 1 ... 31 MB in DRAM */
-#define	CFG_LOAD_ADDR		0x01000000	/* default load address */
-#define	CFG_HZ			1000	/* decrementer freq: 10 ms ticks */
-#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
-#define	CFG_SDRAM_BASE		0x00000000
-#define CFG_MAX_RAM_SIZE	(CONFIG_MEM_SIZE * 1024 * 1024)
-#define CFG_FLASH_BASE		0x20000000
-
-#define	CFG_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor	*/
-#define CFG_MONITOR_BASE	(CFG_MAX_RAM_SIZE - CFG_MONITOR_LEN)
-#define	CFG_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/
-#define CFG_MALLOC_BASE		(CFG_MONITOR_BASE - CFG_MALLOC_LEN)
-#define CFG_GBL_DATA_SIZE	0x4000
-#define CFG_GBL_DATA_ADDR	(CFG_MALLOC_BASE - CFG_GBL_DATA_SIZE)
-#define CONFIG_STACKBASE	(CFG_GBL_DATA_ADDR  - 4)
-
-#define	CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
-#define CFG_FLASH0_BASE		0x20000000
-#define CFG_FLASH1_BASE		0x20200000
-#define CFG_FLASH2_BASE		0x20280000
-#define CFG_MAX_FLASH_BANKS	3	/* max number of memory banks */
-#define CFG_MAX_FLASH_SECT	40	/* max number of sectors on one chip */
-
-#define	CFG_ENV_IS_IN_FLASH	1
-#define CFG_ENV_ADDR		0x20020000
-#define	CFG_ENV_SECT_SIZE	0x10000	/* Total Size of Environment Sector */
+#define	CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)	/* Print Buffer Size */
+#define	CONFIG_SYS_MAXARGS		16	/* max number of command args */
+#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size */
+#define CONFIG_SYS_MEMTEST_START	0x00000000	/* memtest works on */
+#define CONFIG_SYS_MEMTEST_END		( (CONFIG_MEM_SIZE - 1) * 1024 * 1024)	/* 1 ... 31 MB in DRAM */
+#define	CONFIG_SYS_LOAD_ADDR		0x01000000	/* default load address */
+#define	CONFIG_SYS_HZ			1000	/* decrementer freq: 10 ms ticks */
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+#define	CONFIG_SYS_SDRAM_BASE		0x00000000
+#define CONFIG_SYS_MAX_RAM_SIZE	(CONFIG_MEM_SIZE * 1024 * 1024)
+#define CONFIG_SYS_FLASH_BASE		0x20000000
+
+#define	CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor	*/
+#define CONFIG_SYS_MONITOR_BASE	(CONFIG_SYS_MAX_RAM_SIZE - CONFIG_SYS_MONITOR_LEN)
+#define	CONFIG_SYS_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/
+#define CONFIG_SYS_MALLOC_BASE		(CONFIG_SYS_MONITOR_BASE - CONFIG_SYS_MALLOC_LEN)
+#define CONFIG_SYS_GBL_DATA_SIZE	0x4000
+#define CONFIG_SYS_GBL_DATA_ADDR	(CONFIG_SYS_MALLOC_BASE - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_STACKBASE	(CONFIG_SYS_GBL_DATA_ADDR  - 4)
+
+#define	CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
+#define CONFIG_SYS_FLASH0_BASE		0x20000000
+#define CONFIG_SYS_FLASH1_BASE		0x20200000
+#define CONFIG_SYS_FLASH2_BASE		0x20280000
+#define CONFIG_SYS_MAX_FLASH_BANKS	3	/* max number of memory banks */
+#define CONFIG_SYS_MAX_FLASH_SECT	40	/* max number of sectors on one chip */
+
+#define	CONFIG_ENV_IS_IN_FLASH	1
+#define CONFIG_ENV_ADDR		0x20020000
+#define	CONFIG_ENV_SECT_SIZE	0x10000	/* Total Size of Environment Sector */
 
 /* JFFS Partition offset set  */
-#define CFG_JFFS2_FIRST_BANK	0
-#define CFG_JFFS2_NUM_BANKS	1
+#define CONFIG_SYS_JFFS2_FIRST_BANK	0
+#define CONFIG_SYS_JFFS2_NUM_BANKS	1
 /* 512k reserved for u-boot */
-#define CFG_JFFS2_FIRST_SECTOR	11
+#define CONFIG_SYS_JFFS2_FIRST_SECTOR	11
 
 
 /*
@@ -157,7 +157,7 @@
 #define POLL_MODE		1
 #define FLASH_TOT_SECT		40
 #define FLASH_SIZE		0x220000
-#define CFG_FLASH_SIZE		0x220000
+#define CONFIG_SYS_FLASH_SIZE		0x220000
 
 /*
  * Initialize PSD4256 registers for using I2C
@@ -197,10 +197,10 @@
 				}
 #define I2C_DELAY	udelay(5)	/* 1/4 I2C clock duration */
 
-#define CFG_I2C_SPEED		50000
-#define CFG_I2C_SLAVE		0xFE
+#define CONFIG_SYS_I2C_SPEED		50000
+#define CONFIG_SYS_I2C_SLAVE		0xFE
 
-#define CFG_BOOTM_LEN		0x4000000	/* Large Image Length, set to 64 Meg */
+#define CONFIG_SYS_BOOTM_LEN		0x4000000	/* Large Image Length, set to 64 Meg */
 
 #define CONFIG_EBIU_SDRRC_VAL  0x398
 #define CONFIG_EBIU_SDGCTL_VAL 0x91118d
diff --git a/include/configs/bf533-stamp.h b/include/configs/bf533-stamp.h
index 9f5667bcb..5ad99a2fd 100644
--- a/include/configs/bf533-stamp.h
+++ b/include/configs/bf533-stamp.h
@@ -93,44 +93,44 @@
  * Flash settings
  */
 
-#define CFG_FLASH_CFI		/* The flash is CFI compatible  */
+#define CONFIG_SYS_FLASH_CFI		/* The flash is CFI compatible  */
 #define CONFIG_FLASH_CFI_DRIVER	/* Use common CFI driver	*/
-#define	CFG_FLASH_CFI_AMD_RESET
+#define	CONFIG_SYS_FLASH_CFI_AMD_RESET
 
-#define CFG_FLASH_BASE		0x20000000
-#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks */
-#define CFG_MAX_FLASH_SECT	67	/* max number of sectors on one chip */
+#define CONFIG_SYS_FLASH_BASE		0x20000000
+#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks */
+#define CONFIG_SYS_MAX_FLASH_SECT	67	/* max number of sectors on one chip */
 
 #if (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_SPI_MASTER)
-#define CFG_ENV_IS_IN_EEPROM	1
-#define CFG_ENV_OFFSET		0x4000
-#define CFG_ENV_HEADER		(CFG_ENV_OFFSET + 0x12A)	/* 0x12A is the length of LDR file header */
+#define CONFIG_ENV_IS_IN_EEPROM	1
+#define CONFIG_ENV_OFFSET		0x4000
+#define CONFIG_ENV_HEADER		(CONFIG_ENV_OFFSET + 0x12A)	/* 0x12A is the length of LDR file header */
 #else
-#define CFG_ENV_IS_IN_FLASH	1
-#define CFG_ENV_ADDR		0x20004000
-#define	CFG_ENV_OFFSET		(CFG_ENV_ADDR - CFG_FLASH_BASE)
+#define CONFIG_ENV_IS_IN_FLASH	1
+#define CONFIG_ENV_ADDR		0x20004000
+#define	CONFIG_ENV_OFFSET		(CONFIG_ENV_ADDR - CONFIG_SYS_FLASH_BASE)
 #endif
 
-#define	CFG_ENV_SIZE		0x2000
-#define CFG_ENV_SECT_SIZE	0x2000	/* Total Size of Environment Sector */
+#define	CONFIG_ENV_SIZE		0x2000
+#define CONFIG_ENV_SECT_SIZE	0x2000	/* Total Size of Environment Sector */
 #define	ENV_IS_EMBEDDED
 
-#define CFG_FLASH_ERASE_TOUT	30000	/* Timeout for Chip Erase (in ms) */
-#define CFG_FLASH_ERASEBLOCK_TOUT	5000	/* Timeout for Block Erase (in ms) */
-#define CFG_FLASH_WRITE_TOUT	1	/* Timeout for Flash Write (in ms) */
+#define CONFIG_SYS_FLASH_ERASE_TOUT	30000	/* Timeout for Chip Erase (in ms) */
+#define CONFIG_SYS_FLASH_ERASEBLOCK_TOUT	5000	/* Timeout for Block Erase (in ms) */
+#define CONFIG_SYS_FLASH_WRITE_TOUT	1	/* Timeout for Flash Write (in ms) */
 
 /* JFFS Partition offset set  */
-#define CFG_JFFS2_FIRST_BANK 0
-#define CFG_JFFS2_NUM_BANKS  1
+#define CONFIG_SYS_JFFS2_FIRST_BANK 0
+#define CONFIG_SYS_JFFS2_NUM_BANKS  1
 /* 512k reserved for u-boot */
-#define CFG_JFFS2_FIRST_SECTOR	11
+#define CONFIG_SYS_JFFS2_FIRST_SECTOR	11
 
 /*
  * following timeouts shall be used once the
  * Flash real protection is enabled
  */
-#define CFG_FLASH_LOCK_TOUT	5	/* Timeout for Flash Set Lock Bit (in ms) */
-#define CFG_FLASH_UNLOCK_TOUT	10000	/* Timeout for Flash Clear Lock Bits (in ms) */
+#define CONFIG_SYS_FLASH_LOCK_TOUT	5	/* Timeout for Flash Set Lock Bit (in ms) */
+#define CONFIG_SYS_FLASH_UNLOCK_TOUT	10000	/* Timeout for Flash Clear Lock Bits (in ms) */
 
 /*
  * SDRAM settings & memory map
@@ -140,27 +140,27 @@
 #define CONFIG_MEM_ADD_WDTH     11	/* 8, 9, 10, 11    */
 #define CONFIG_MEM_MT48LC64M4A2FB_7E	1
 
-#define CFG_MEMTEST_START	0x00000000	/* memtest works on */
+#define CONFIG_SYS_MEMTEST_START	0x00000000	/* memtest works on */
 
-#define	CFG_SDRAM_BASE		0x00000000
+#define	CONFIG_SYS_SDRAM_BASE		0x00000000
 
-#define CFG_MAX_RAM_SIZE	(CONFIG_MEM_SIZE * 1024 *1024)
-#define CFG_MEMTEST_END		(CFG_MAX_RAM_SIZE - 0x80000 - 1)
+#define CONFIG_SYS_MAX_RAM_SIZE	(CONFIG_MEM_SIZE * 1024 *1024)
+#define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_MAX_RAM_SIZE - 0x80000 - 1)
 #define CONFIG_LOADADDR		0x01000000
 
-#define CFG_LOAD_ADDR		CONFIG_LOADADDR
-#define	CFG_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor	*/
-#define CFG_MALLOC_LEN		(128 << 10)     /* Reserve 128 kB for malloc()	*/
-#define CFG_GBL_DATA_SIZE	0x4000		/* Reserve 16k for Global Data  */
+#define CONFIG_SYS_LOAD_ADDR		CONFIG_LOADADDR
+#define	CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor	*/
+#define CONFIG_SYS_MALLOC_LEN		(128 << 10)     /* Reserve 128 kB for malloc()	*/
+#define CONFIG_SYS_GBL_DATA_SIZE	0x4000		/* Reserve 16k for Global Data  */
 #define CONFIG_STACKSIZE	(128*1024)	/* regular stack */
 
-#define CFG_MONITOR_BASE		(CFG_MAX_RAM_SIZE - 0x40000)
-#define CFG_MALLOC_BASE		(CFG_MONITOR_BASE - CFG_MALLOC_LEN)
-#define CFG_GBL_DATA_ADDR	(CFG_MALLOC_BASE - CFG_GBL_DATA_SIZE)
-#define CONFIG_STACKBASE	(CFG_GBL_DATA_ADDR  - 4)
+#define CONFIG_SYS_MONITOR_BASE		(CONFIG_SYS_MAX_RAM_SIZE - 0x40000)
+#define CONFIG_SYS_MALLOC_BASE		(CONFIG_SYS_MONITOR_BASE - CONFIG_SYS_MALLOC_LEN)
+#define CONFIG_SYS_GBL_DATA_ADDR	(CONFIG_SYS_MALLOC_BASE - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_STACKBASE	(CONFIG_SYS_GBL_DATA_ADDR  - 4)
 
 /* Check to make sure everything fits in SDRAM */
-#if ((CFG_MONITOR_BASE + CFG_MONITOR_LEN) > CFG_MAX_RAM_SIZE)
+#if ((CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN) > CONFIG_SYS_MAX_RAM_SIZE)
 	#error Memory Map does not fit into configuration
 #endif
 
@@ -182,10 +182,10 @@
  * Command settings
  */
 
-#define CFG_LONGHELP		1
+#define CONFIG_SYS_LONGHELP		1
 #define CONFIG_CMDLINE_EDITING	1
 
-#define CFG_AUTOLOAD		"no"	/*rarpb, bootp or dhcp commands will perform only a */
+#define CONFIG_SYS_AUTOLOAD		"no"	/*rarpb, bootp or dhcp commands will perform only a */
 
 /* configuration lookup from the BOOTP/DHCP server, */
 /* but not try to load any image using TFTP	    */
@@ -256,18 +256,18 @@
  */
 
 #define CONFIG_BAUDRATE		57600
-#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
 
-#define	CFG_PROMPT		"bfin> "	/* Monitor Command Prompt */
+#define	CONFIG_SYS_PROMPT		"bfin> "	/* Monitor Command Prompt */
 
 #if defined(CONFIG_CMD_KGDB)
-#define CFG_CBSIZE	1024		/* Console I/O Buffer Size */
+#define CONFIG_SYS_CBSIZE	1024		/* Console I/O Buffer Size */
 #else
-#define CFG_CBSIZE	256		/* Console I/O Buffer Size */
+#define CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size */
 #endif
-#define CFG_PBSIZE	(CFG_CBSIZE+sizeof(CFG_PROMPT)+16)	/* Print Buffer Size */
-#define CFG_MAXARGS	16		/* max number of command args */
-#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size */
+#define CONFIG_SYS_PBSIZE	(CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)	/* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS	16		/* max number of command args */
+#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size */
 
 #define CONFIG_LOADS_ECHO	1
 
@@ -299,8 +299,8 @@
 				}
 #define I2C_DELAY		udelay(5)	/* 1/4 I2C clock duration */
 
-#define CFG_I2C_SPEED		50000
-#define CFG_I2C_SLAVE		0xFE
+#define CONFIG_SYS_I2C_SPEED		50000
+#define CONFIG_SYS_I2C_SLAVE		0xFE
 #endif /* CONFIG_SOFT_I2C */
 
 /*
@@ -321,26 +321,26 @@
 #undef  CONFIG_IDE_LED			/* no led for ide supported */
 #undef  CONFIG_IDE_RESET		/* no reset for ide supported */
 
-#define CFG_IDE_MAXBUS		1	/* max. 1 IDE busses */
-#define CFG_IDE_MAXDEVICE	(CFG_IDE_MAXBUS*1) /* max. 1 drives per IDE bus */
+#define CONFIG_SYS_IDE_MAXBUS		1	/* max. 1 IDE busses */
+#define CONFIG_SYS_IDE_MAXDEVICE	(CONFIG_SYS_IDE_MAXBUS*1) /* max. 1 drives per IDE bus */
 
-#define CFG_ATA_BASE_ADDR	0x20200000
-#define CFG_ATA_IDE0_OFFSET	0x0000
+#define CONFIG_SYS_ATA_BASE_ADDR	0x20200000
+#define CONFIG_SYS_ATA_IDE0_OFFSET	0x0000
 
-#define CFG_ATA_DATA_OFFSET	0x0020	/* Offset for data I/O */
-#define CFG_ATA_REG_OFFSET	0x0020	/* Offset for normal register accesses */
-#define CFG_ATA_ALT_OFFSET	0x0007	/* Offset for alternate registers */
+#define CONFIG_SYS_ATA_DATA_OFFSET	0x0020	/* Offset for data I/O */
+#define CONFIG_SYS_ATA_REG_OFFSET	0x0020	/* Offset for normal register accesses */
+#define CONFIG_SYS_ATA_ALT_OFFSET	0x0007	/* Offset for alternate registers */
 
-#define CFG_ATA_STRIDE		2
+#define CONFIG_SYS_ATA_STRIDE		2
 #endif
 
 /*
  * Miscellaneous configurable options
  */
 
-#define	CFG_HZ			1000	/* 1ms time tick */
+#define	CONFIG_SYS_HZ			1000	/* 1ms time tick */
 
-#define CFG_BOOTM_LEN		0x4000000/* Large Image Length, set to 64 Meg */
+#define CONFIG_SYS_BOOTM_LEN		0x4000000/* Large Image Length, set to 64 Meg */
 
 #define CONFIG_SHOW_BOOT_PROGRESS 1	/* Show boot progress on LEDs */
 
diff --git a/include/configs/bf537-stamp.h b/include/configs/bf537-stamp.h
index a06c1dccf..1b54d3b88 100644
--- a/include/configs/bf537-stamp.h
+++ b/include/configs/bf537-stamp.h
@@ -7,7 +7,7 @@
 
 #include <asm/blackfin-config-pre.h>
 
-#define CFG_LONGHELP		1
+#define CONFIG_SYS_LONGHELP		1
 #define CONFIG_CMDLINE_EDITING	1
 #define CONFIG_BAUDRATE		57600
 /* Set default serial console for bf537 */
@@ -81,7 +81,7 @@
  * configuration lookup from the BOOTP/DHCP server
  * but not try to load any image using TFTP
  */
-#define CFG_AUTOLOAD			"no"
+#define CONFIG_SYS_AUTOLOAD			"no"
 
 /*
  * Network Settings
@@ -100,19 +100,19 @@
 /* #define CONFIG_ETHADDR	02:80:ad:20:31:e8 */
 /* This is the routine that copies the MAC in Flash to the 'ethaddr' setting */
 
-#define CFG_LONGHELP		1
+#define CONFIG_SYS_LONGHELP		1
 #define CONFIG_BOOTDELAY	5
 #define CONFIG_BOOT_RETRY_TIME	-1	/* Enable this if bootretry required, currently its disabled */
 #define CONFIG_BOOTCOMMAND	"run ramboot"
 
 #if defined(CONFIG_POST_TEST)
 /* POST support */
-#define CONFIG_POST		( CFG_POST_MEMORY | \
-				  CFG_POST_UART	  | \
-				  CFG_POST_FLASH  | \
-				  CFG_POST_ETHER  | \
-				  CFG_POST_LED	  | \
-				  CFG_POST_BUTTON)
+#define CONFIG_POST		( CONFIG_SYS_POST_MEMORY | \
+				  CONFIG_SYS_POST_UART	  | \
+				  CONFIG_SYS_POST_FLASH  | \
+				  CONFIG_SYS_POST_ETHER  | \
+				  CONFIG_SYS_POST_LED	  | \
+				  CONFIG_SYS_POST_BUTTON)
 #else
 #undef CONFIG_POST
 #endif
@@ -201,57 +201,57 @@
 	"erase 0x20000000 0x2007FFFF;cp.b 0x1000000 0x20000000 $(filesize)\0"	\
 	""
 
-#define	CFG_PROMPT		"bfin> "	/* Monitor Command Prompt */
+#define	CONFIG_SYS_PROMPT		"bfin> "	/* Monitor Command Prompt */
 
 #if defined(CONFIG_CMD_KGDB)
-#define	CFG_CBSIZE		1024	/* Console I/O Buffer Size */
+#define	CONFIG_SYS_CBSIZE		1024	/* Console I/O Buffer Size */
 #else
-#define	CFG_CBSIZE		256	/* Console I/O Buffer Size */
+#define	CONFIG_SYS_CBSIZE		256	/* Console I/O Buffer Size */
 #endif
-#define CFG_MAX_RAM_SIZE	(CONFIG_MEM_SIZE * 1024*1024)
-#define	CFG_PBSIZE		(CFG_CBSIZE+sizeof(CFG_PROMPT)+16)	/* Print Buffer Size */
-#define	CFG_MAXARGS		16	/* max number of command args */
-#define CFG_BARGSIZE		CFG_CBSIZE	/* Boot Argument Buffer Size */
-#define CFG_MEMTEST_START	0x0	/* memtest works on */
-#define CFG_MEMTEST_END		( (CONFIG_MEM_SIZE - 1) * 1024*1024)	/* 1 ... 63 MB in DRAM */
-#define	CFG_LOAD_ADDR		CONFIG_LOADADDR	/* default load address */
-#define	CFG_HZ			1000	/* decrementer freq: 10 ms ticks */
-#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
-#define	CFG_SDRAM_BASE		0x00000000
-
-#define CFG_FLASH_BASE		0x20000000
-#define CFG_FLASH_CFI		/* The flash is CFI compatible */
+#define CONFIG_SYS_MAX_RAM_SIZE	(CONFIG_MEM_SIZE * 1024*1024)
+#define	CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)	/* Print Buffer Size */
+#define	CONFIG_SYS_MAXARGS		16	/* max number of command args */
+#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size */
+#define CONFIG_SYS_MEMTEST_START	0x0	/* memtest works on */
+#define CONFIG_SYS_MEMTEST_END		( (CONFIG_MEM_SIZE - 1) * 1024*1024)	/* 1 ... 63 MB in DRAM */
+#define	CONFIG_SYS_LOAD_ADDR		CONFIG_LOADADDR	/* default load address */
+#define	CONFIG_SYS_HZ			1000	/* decrementer freq: 10 ms ticks */
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+#define	CONFIG_SYS_SDRAM_BASE		0x00000000
+
+#define CONFIG_SYS_FLASH_BASE		0x20000000
+#define CONFIG_SYS_FLASH_CFI		/* The flash is CFI compatible */
 #define CONFIG_FLASH_CFI_DRIVER	/* Use common CFI driver */
-#define CFG_FLASH_PROTECTION
-#define CFG_MAX_FLASH_BANKS	1
-#define CFG_MAX_FLASH_SECT	71	/* some have 67 sectors (M29W320DB), but newer have 71 (M29W320EB) */
-
-#define	CFG_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor	*/
-#define CFG_MONITOR_BASE	(CFG_MAX_RAM_SIZE - CFG_MONITOR_LEN)
-#define	CFG_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/
-#define CFG_MALLOC_BASE		(CFG_MONITOR_BASE - CFG_MALLOC_LEN)
-#define CFG_GBL_DATA_SIZE	0x4000
-#define CFG_GBL_DATA_ADDR	(CFG_MALLOC_BASE - CFG_GBL_DATA_SIZE)
-#define CONFIG_STACKBASE	(CFG_GBL_DATA_ADDR  - 4)
+#define CONFIG_SYS_FLASH_PROTECTION
+#define CONFIG_SYS_MAX_FLASH_BANKS	1
+#define CONFIG_SYS_MAX_FLASH_SECT	71	/* some have 67 sectors (M29W320DB), but newer have 71 (M29W320EB) */
+
+#define	CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor	*/
+#define CONFIG_SYS_MONITOR_BASE	(CONFIG_SYS_MAX_RAM_SIZE - CONFIG_SYS_MONITOR_LEN)
+#define	CONFIG_SYS_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/
+#define CONFIG_SYS_MALLOC_BASE		(CONFIG_SYS_MONITOR_BASE - CONFIG_SYS_MALLOC_LEN)
+#define CONFIG_SYS_GBL_DATA_SIZE	0x4000
+#define CONFIG_SYS_GBL_DATA_ADDR	(CONFIG_SYS_MALLOC_BASE - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_STACKBASE	(CONFIG_SYS_GBL_DATA_ADDR  - 4)
 
 #if (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_SPI_MASTER)
-#define CFG_ENV_IS_IN_EEPROM	1
-#define CFG_ENV_OFFSET		0x4000
-#define CFG_ENV_HEADER		(CFG_ENV_OFFSET + 0x16e) /* 0x12A is the length of LDR file header */
+#define CONFIG_ENV_IS_IN_EEPROM	1
+#define CONFIG_ENV_OFFSET		0x4000
+#define CONFIG_ENV_HEADER		(CONFIG_ENV_OFFSET + 0x16e) /* 0x12A is the length of LDR file header */
 #else
-#define	CFG_ENV_IS_IN_FLASH	1
-#define CFG_ENV_ADDR		0x20004000
-#define CFG_ENV_OFFSET		(CFG_ENV_ADDR - CFG_FLASH_BASE)
+#define	CONFIG_ENV_IS_IN_FLASH	1
+#define CONFIG_ENV_ADDR		0x20004000
+#define CONFIG_ENV_OFFSET		(CONFIG_ENV_ADDR - CONFIG_SYS_FLASH_BASE)
 #endif
-#define CFG_ENV_SIZE		0x2000
-#define	CFG_ENV_SECT_SIZE	0x2000	/* Total Size of Environment Sector */
+#define CONFIG_ENV_SIZE		0x2000
+#define	CONFIG_ENV_SECT_SIZE	0x2000	/* Total Size of Environment Sector */
 #define ENV_IS_EMBEDDED
 
 /* JFFS Partition offset set  */
-#define CFG_JFFS2_FIRST_BANK	0
-#define CFG_JFFS2_NUM_BANKS	1
+#define CONFIG_SYS_JFFS2_FIRST_BANK	0
+#define CONFIG_SYS_JFFS2_NUM_BANKS	1
 /* 512k reserved for u-boot */
-#define CFG_JFFS2_FIRST_SECTOR	15
+#define CONFIG_SYS_JFFS2_FIRST_SECTOR	15
 
 #define CONFIG_SPI
 
@@ -263,15 +263,15 @@
 #define POLL_MODE		1
 #define FLASH_TOT_SECT		71
 #define FLASH_SIZE		0x400000
-#define CFG_FLASH_SIZE		0x400000
+#define CONFIG_SYS_FLASH_SIZE		0x400000
 
 /*
  * Board NAND Infomation
  */
 
-#define CFG_NAND_ADDR		0x20212000
-#define CFG_NAND_BASE		CFG_NAND_ADDR
-#define CFG_MAX_NAND_DEVICE	1
+#define CONFIG_SYS_NAND_ADDR		0x20212000
+#define CONFIG_SYS_NAND_BASE		CONFIG_SYS_NAND_ADDR
+#define CONFIG_SYS_MAX_NAND_DEVICE	1
 #define SECTORSIZE		512
 #define ADDR_COLUMN		1
 #define ADDR_PAGE		2
@@ -302,7 +302,7 @@
  */
 #define CONFIG_MISC_INIT_R
 
-#define CFG_BOOTM_LEN		0x4000000	/* Large Image Length, set to 64 Meg */
+#define CONFIG_SYS_BOOTM_LEN		0x4000000	/* Large Image Length, set to 64 Meg */
 
 /*
  * I2C settings
@@ -352,8 +352,8 @@
 #define I2C_DELAY		udelay(5)	/* 1/4 I2C clock duration */
 #endif
 
-#define CFG_I2C_SPEED		50000
-#define CFG_I2C_SLAVE		0xFE
+#define CONFIG_SYS_I2C_SPEED		50000
+#define CONFIG_SYS_I2C_SLAVE		0xFE
 
 /* 0xFF, 0x7BB07BB0, 0x22547BB0 */
 /* #define AMGCTLVAL		(AMBEN_P0 | AMBEN_P1 | AMBEN_P2 | AMCKEN)
@@ -377,8 +377,8 @@
 #undef  CONFIG_IDE_LED		/* no led for ide supported */
 #undef  CONFIG_IDE_RESET	/* no reset for ide supported */
 
-#define CFG_IDE_MAXBUS		1	/* max. 1 IDE busses */
-#define CFG_IDE_MAXDEVICE	(CFG_IDE_MAXBUS*1)	/* max. 1 drives per IDE bus */
+#define CONFIG_SYS_IDE_MAXBUS		1	/* max. 1 IDE busses */
+#define CONFIG_SYS_IDE_MAXDEVICE	(CONFIG_SYS_IDE_MAXBUS*1)	/* max. 1 drives per IDE bus */
 
 #undef  AMBCTL1VAL
 #define AMBCTL1VAL		0xFFC3FFC3
@@ -391,30 +391,30 @@
  * Note that these settings aren't for the most part used in include/ata.h
  * when all of the ATA registers are setup
  */
-#define CFG_ATA_BASE_ADDR	0x2031C000
-#define CFG_ATA_IDE0_OFFSET	0x0000
-#define CFG_ATA_DATA_OFFSET	0x0020	/* Offset for data I/O */
-#define CFG_ATA_REG_OFFSET	0x0020	/* Offset for normal register accesses */
-#define CFG_ATA_ALT_OFFSET	0x001C	/* Offset for alternate registers */
-#define CFG_ATA_STRIDE		2	/* CF.A0 --> Blackfin.Ax */
+#define CONFIG_SYS_ATA_BASE_ADDR	0x2031C000
+#define CONFIG_SYS_ATA_IDE0_OFFSET	0x0000
+#define CONFIG_SYS_ATA_DATA_OFFSET	0x0020	/* Offset for data I/O */
+#define CONFIG_SYS_ATA_REG_OFFSET	0x0020	/* Offset for normal register accesses */
+#define CONFIG_SYS_ATA_ALT_OFFSET	0x001C	/* Offset for alternate registers */
+#define CONFIG_SYS_ATA_STRIDE		2	/* CF.A0 --> Blackfin.Ax */
 #endif				/* CONFIG_BFIN_TRUE_IDE */
 
 #if defined(CONFIG_BFIN_CF_IDE)	/* USE CompactFlash Storage Card in the common memory space */
-#define CFG_ATA_BASE_ADDR	0x20211800
-#define CFG_ATA_IDE0_OFFSET	0x0000
-#define CFG_ATA_DATA_OFFSET	0x0000	/* Offset for data I/O */
-#define CFG_ATA_REG_OFFSET	0x0000	/* Offset for normal register accesses */
-#define CFG_ATA_ALT_OFFSET	0x000E	/* Offset for alternate registers */
-#define CFG_ATA_STRIDE		1	/* CF.A0 --> Blackfin.Ax */
+#define CONFIG_SYS_ATA_BASE_ADDR	0x20211800
+#define CONFIG_SYS_ATA_IDE0_OFFSET	0x0000
+#define CONFIG_SYS_ATA_DATA_OFFSET	0x0000	/* Offset for data I/O */
+#define CONFIG_SYS_ATA_REG_OFFSET	0x0000	/* Offset for normal register accesses */
+#define CONFIG_SYS_ATA_ALT_OFFSET	0x000E	/* Offset for alternate registers */
+#define CONFIG_SYS_ATA_STRIDE		1	/* CF.A0 --> Blackfin.Ax */
 #endif				/* CONFIG_BFIN_CF_IDE */
 
 #if defined(CONFIG_BFIN_HDD_IDE)	/* USE TRUE IDE */
-#define CFG_ATA_BASE_ADDR	0x20314000
-#define CFG_ATA_IDE0_OFFSET	0x0000
-#define CFG_ATA_DATA_OFFSET	0x0020	/* Offset for data I/O */
-#define CFG_ATA_REG_OFFSET	0x0020	/* Offset for normal register accesses */
-#define CFG_ATA_ALT_OFFSET	0x001C	/* Offset for alternate registers */
-#define CFG_ATA_STRIDE		2	/* CF.A0 --> Blackfin.A1 */
+#define CONFIG_SYS_ATA_BASE_ADDR	0x20314000
+#define CONFIG_SYS_ATA_IDE0_OFFSET	0x0000
+#define CONFIG_SYS_ATA_DATA_OFFSET	0x0020	/* Offset for data I/O */
+#define CONFIG_SYS_ATA_REG_OFFSET	0x0020	/* Offset for normal register accesses */
+#define CONFIG_SYS_ATA_ALT_OFFSET	0x001C	/* Offset for alternate registers */
+#define CONFIG_SYS_ATA_STRIDE		2	/* CF.A0 --> Blackfin.A1 */
 
 #undef  CONFIG_SCLK_DIV
 #define CONFIG_SCLK_DIV		8
diff --git a/include/configs/bf561-ezkit.h b/include/configs/bf561-ezkit.h
index e4a7f9dbc..320a8c69a 100644
--- a/include/configs/bf561-ezkit.h
+++ b/include/configs/bf561-ezkit.h
@@ -7,7 +7,7 @@
 
 #include <asm/blackfin-config-pre.h>
 
-#define CFG_LONGHELP		1
+#define CONFIG_SYS_LONGHELP		1
 #define CONFIG_CMDLINE_EDITING	1
 #define CONFIG_BAUDRATE		57600
 /* Set default serial console for bf537 */
@@ -76,20 +76,20 @@
  * Flash settings
  */
 
-#define CFG_FLASH_CFI		/* The flash is CFI compatible */
+#define CONFIG_SYS_FLASH_CFI		/* The flash is CFI compatible */
 #define CONFIG_FLASH_CFI_DRIVER	/* Use common CFI driver */
-#define CFG_FLASH_CFI_AMD_RESET
-#define	CFG_ENV_IS_IN_FLASH	1
-#define CFG_FLASH_BASE		0x20000000
-#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks */
-#define CFG_MAX_FLASH_SECT	135	/* max number of sectors on one chip */
-#define CFG_ENV_ADDR		0x20020000
-#define	CFG_ENV_SECT_SIZE	0x10000	/* Total Size of Environment Sector */
+#define CONFIG_SYS_FLASH_CFI_AMD_RESET
+#define	CONFIG_ENV_IS_IN_FLASH	1
+#define CONFIG_SYS_FLASH_BASE		0x20000000
+#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks */
+#define CONFIG_SYS_MAX_FLASH_SECT	135	/* max number of sectors on one chip */
+#define CONFIG_ENV_ADDR		0x20020000
+#define	CONFIG_ENV_SECT_SIZE	0x10000	/* Total Size of Environment Sector */
 /* JFFS Partition offset set  */
-#define CFG_JFFS2_FIRST_BANK	0
-#define CFG_JFFS2_NUM_BANKS	1
+#define CONFIG_SYS_JFFS2_FIRST_BANK	0
+#define CONFIG_SYS_JFFS2_NUM_BANKS	1
 /* 512k reserved for u-boot */
-#define CFG_JFFS2_FIRST_SECTOR	8
+#define CONFIG_SYS_JFFS2_FIRST_SECTOR	8
 
 /*
  * SDRAM settings & memory map
@@ -99,23 +99,23 @@
 #define CONFIG_MEM_ADD_WDTH		9	/* 8, 9, 10, 11    */
 #define CONFIG_MEM_MT48LC16M16A2TG_75	1
 
-#define	CFG_SDRAM_BASE		0x00000000
-#define CFG_MAX_RAM_SIZE	(CONFIG_MEM_SIZE * 1024 * 1024)
+#define	CONFIG_SYS_SDRAM_BASE		0x00000000
+#define CONFIG_SYS_MAX_RAM_SIZE	(CONFIG_MEM_SIZE * 1024 * 1024)
 
-#define CFG_MEMTEST_START	0x0	/* memtest works on */
-#define CFG_MEMTEST_END		( (CONFIG_MEM_SIZE - 1) * 1024*1024)	/* 1 ... 63 MB in DRAM */
+#define CONFIG_SYS_MEMTEST_START	0x0	/* memtest works on */
+#define CONFIG_SYS_MEMTEST_END		( (CONFIG_MEM_SIZE - 1) * 1024*1024)	/* 1 ... 63 MB in DRAM */
 
 #define	CONFIG_LOADADDR		0x01000000	/* default load address */
-#define CFG_LOAD_ADDR		CONFIG_LOADADDR
-#define	CFG_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor   */
-#define CFG_MONITOR_BASE	(CFG_MAX_RAM_SIZE - CFG_MONITOR_LEN)
+#define CONFIG_SYS_LOAD_ADDR		CONFIG_LOADADDR
+#define	CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor   */
+#define CONFIG_SYS_MONITOR_BASE	(CONFIG_SYS_MAX_RAM_SIZE - CONFIG_SYS_MONITOR_LEN)
 
-#define	CFG_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()  */
-#define CFG_MALLOC_BASE		(CFG_MONITOR_BASE - CFG_MALLOC_LEN)
+#define	CONFIG_SYS_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()  */
+#define CONFIG_SYS_MALLOC_BASE		(CONFIG_SYS_MONITOR_BASE - CONFIG_SYS_MALLOC_LEN)
 
-#define CFG_GBL_DATA_SIZE	0x4000
-#define CFG_GBL_DATA_ADDR	(CFG_MALLOC_BASE - CFG_GBL_DATA_SIZE)
-#define CONFIG_STACKBASE	(CFG_GBL_DATA_ADDR  - 4)
+#define CONFIG_SYS_GBL_DATA_SIZE	0x4000
+#define CONFIG_SYS_GBL_DATA_ADDR	(CONFIG_SYS_MALLOC_BASE - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_STACKBASE	(CONFIG_SYS_GBL_DATA_ADDR  - 4)
 #define CONFIG_STACKSIZE	(128*1024)	/* regular stack */
 
 #if ( CONFIG_CLKIN_HALF == 0 )
@@ -136,7 +136,7 @@
  * Command settings
  */
 
-#define CFG_AUTOLOAD	"no"	/* rarpb, bootp, dhcp commands will	*/
+#define CONFIG_SYS_AUTOLOAD	"no"	/* rarpb, bootp, dhcp commands will	*/
 				/* only perform a configuration		*/
 				/* lookup from the BOOTP/DHCP server	*/
 				/* but not try to load any image	*/
@@ -194,26 +194,26 @@
 /*
  * Console settings
  */
-#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
 
-#define	CFG_PROMPT		"bfin> "	/* Monitor Command Prompt */
+#define	CONFIG_SYS_PROMPT		"bfin> "	/* Monitor Command Prompt */
 
 #if defined(CONFIG_CMD_KGDB)
-#define	CFG_CBSIZE		1024		/* Console I/O Buffer Size */
+#define	CONFIG_SYS_CBSIZE		1024		/* Console I/O Buffer Size */
 #else
-#define	CFG_CBSIZE		256		/* Console I/O Buffer Size */
+#define	CONFIG_SYS_CBSIZE		256		/* Console I/O Buffer Size */
 #endif
-#define	CFG_PBSIZE		(CFG_CBSIZE+sizeof(CFG_PROMPT)+16)	/* Print Buffer Size */
-#define	CFG_MAXARGS		16		/* max number of command args */
-#define CFG_BARGSIZE		CFG_CBSIZE	/* Boot Argument Buffer Size */
+#define	CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)	/* Print Buffer Size */
+#define	CONFIG_SYS_MAXARGS		16		/* max number of command args */
+#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size */
 
 #define CONFIG_LOADS_ECHO	1
 
 /*
  * Miscellaneous configurable options
  */
-#define	CFG_HZ			1000		/* decrementer freq: 10 ms ticks */
-#define CFG_BOOTM_LEN		0x4000000	/* Large Image Length, set to 64 Meg */
+#define	CONFIG_SYS_HZ			1000		/* decrementer freq: 10 ms ticks */
+#define CONFIG_SYS_BOOTM_LEN		0x4000000	/* Large Image Length, set to 64 Meg */
 
 /*
  * FLASH organization and environment definitions
diff --git a/include/configs/bubinga.h b/include/configs/bubinga.h
index acce82f62..dcf5b6de0 100644
--- a/include/configs/bubinga.h
+++ b/include/configs/bubinga.h
@@ -81,9 +81,9 @@
  *       supported for backward compatibility.
  */
 #if 1
-#define CFG_ENV_IS_IN_FLASH     1	/* use FLASH for environment vars	*/
+#define CONFIG_ENV_IS_IN_FLASH     1	/* use FLASH for environment vars	*/
 #else
-#define CFG_ENV_IS_IN_NVRAM	1	/* use NVRAM for environment vars	*/
+#define CONFIG_ENV_IS_IN_NVRAM	1	/* use NVRAM for environment vars	*/
 #endif
 
 /*
@@ -115,31 +115,31 @@
 #define CONFIG_SPD_EEPROM      1       /* use SPD EEPROM for setup    */
 
 /*
- * If CFG_EXT_SERIAL_CLOCK, then the UART divisor is 1.
- * If CFG_405_UART_ERRATA_59, then UART divisor is 31.
- * Otherwise, UART divisor is determined by CPU Clock and CFG_BASE_BAUD value.
+ * If CONFIG_SYS_EXT_SERIAL_CLOCK, then the UART divisor is 1.
+ * If CONFIG_SYS_405_UART_ERRATA_59, then UART divisor is 31.
+ * Otherwise, UART divisor is determined by CPU Clock and CONFIG_SYS_BASE_BAUD value.
  * The Linux BASE_BAUD define should match this configuration.
  *    baseBaud = cpuClock/(uartDivisor*16)
- * If CFG_405_UART_ERRATA_59 and 200MHz CPU clock,
+ * If CONFIG_SYS_405_UART_ERRATA_59 and 200MHz CPU clock,
  * set Linux BASE_BAUD to 403200.
  */
 #undef	CONFIG_SERIAL_SOFTWARE_FIFO
-#undef  CFG_EXT_SERIAL_CLOCK           /* external serial clock */
-#undef  CFG_405_UART_ERRATA_59         /* 405GP/CR Rev. D silicon */
-#define CFG_BASE_BAUD       691200
+#undef  CONFIG_SYS_EXT_SERIAL_CLOCK           /* external serial clock */
+#undef  CONFIG_SYS_405_UART_ERRATA_59         /* 405GP/CR Rev. D silicon */
+#define CONFIG_SYS_BASE_BAUD       691200
 
 /*-----------------------------------------------------------------------
  * I2C stuff
  *-----------------------------------------------------------------------
  */
-#define CFG_I2C_SPEED		400000	/* I2C speed and slave address	*/
+#define CONFIG_SYS_I2C_SPEED		400000	/* I2C speed and slave address	*/
 
-#define CFG_I2C_NOPROBES	{ 0x69 }	/* avoid iprobe hangup (why?) */
-#define CFG_EEPROM_PAGE_WRITE_DELAY_MS	6	/* 24C02 requires 5ms delay */
+#define CONFIG_SYS_I2C_NOPROBES	{ 0x69 }	/* avoid iprobe hangup (why?) */
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	6	/* 24C02 requires 5ms delay */
 
 #if defined(CONFIG_CMD_EEPROM)
-#define CFG_I2C_EEPROM_ADDR	0x50	/* I2C boot EEPROM (24C02W)	*/
-#define CFG_I2C_EEPROM_ADDR_LEN	1	/* Bytes of address		*/
+#define CONFIG_SYS_I2C_EEPROM_ADDR	0x50	/* I2C boot EEPROM (24C02W)	*/
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN	1	/* Bytes of address		*/
 #endif
 
 /*-----------------------------------------------------------------------
@@ -156,64 +156,64 @@
 					/* resource configuration       */
 #define CONFIG_PCI_SCAN_SHOW            /* show pci devices on startup  */
 
-#define CFG_PCI_SUBSYS_VENDORID 0x10e8	/* AMCC */
-#define CFG_PCI_SUBSYS_DEVICEID 0xcafe	/* Whatever */
-#define CFG_PCI_CLASSCODE       0x0600  /* PCI Class Code: bridge/host  */
-#define CFG_PCI_PTM1LA  0x00000000      /* point to sdram               */
-#define CFG_PCI_PTM1MS  0x80000001      /* 2GB, enable hard-wired to 1  */
-#define CFG_PCI_PTM1PCI 0x00000000      /* Host: use this pci address   */
-#define CFG_PCI_PTM2LA  0x00000000      /* disabled                     */
-#define CFG_PCI_PTM2MS  0x00000000      /* disabled                     */
-#define CFG_PCI_PTM2PCI 0x04000000      /* Host: use this pci address   */
+#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x10e8	/* AMCC */
+#define CONFIG_SYS_PCI_SUBSYS_DEVICEID 0xcafe	/* Whatever */
+#define CONFIG_SYS_PCI_CLASSCODE       0x0600  /* PCI Class Code: bridge/host  */
+#define CONFIG_SYS_PCI_PTM1LA  0x00000000      /* point to sdram               */
+#define CONFIG_SYS_PCI_PTM1MS  0x80000001      /* 2GB, enable hard-wired to 1  */
+#define CONFIG_SYS_PCI_PTM1PCI 0x00000000      /* Host: use this pci address   */
+#define CONFIG_SYS_PCI_PTM2LA  0x00000000      /* disabled                     */
+#define CONFIG_SYS_PCI_PTM2MS  0x00000000      /* disabled                     */
+#define CONFIG_SYS_PCI_PTM2PCI 0x04000000      /* Host: use this pci address   */
 
 /*-----------------------------------------------------------------------
  * External peripheral base address
  *-----------------------------------------------------------------------
  */
-#define	CFG_KEY_REG_BASE_ADDR	0xF0100000
-#define	CFG_IR_REG_BASE_ADDR	0xF0200000
-#define	CFG_FPGA_REG_BASE_ADDR	0xF0300000
+#define	CONFIG_SYS_KEY_REG_BASE_ADDR	0xF0100000
+#define	CONFIG_SYS_IR_REG_BASE_ADDR	0xF0200000
+#define	CONFIG_SYS_FPGA_REG_BASE_ADDR	0xF0300000
 
 /*-----------------------------------------------------------------------
  * Start addresses for the final memory configuration
  * (Set up by the startup code)
  */
-#define CFG_SRAM_BASE		0xFFF00000
-#define CFG_FLASH_BASE		0xFFF80000
+#define CONFIG_SYS_SRAM_BASE		0xFFF00000
+#define CONFIG_SYS_FLASH_BASE		0xFFF80000
 
 /*-----------------------------------------------------------------------
  * FLASH organization
  */
-#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
-#define CFG_MAX_FLASH_SECT	256	/* max number of sectors on one chip	*/
+#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
+#define CONFIG_SYS_MAX_FLASH_SECT	256	/* max number of sectors on one chip	*/
 
-#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
-#define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
+#define CONFIG_SYS_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
+#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
 
-#define CFG_FLASH_ADDR0         0x5555
-#define CFG_FLASH_ADDR1         0x2aaa
-#define CFG_FLASH_WORD_SIZE     unsigned char
+#define CONFIG_SYS_FLASH_ADDR0         0x5555
+#define CONFIG_SYS_FLASH_ADDR1         0x2aaa
+#define CONFIG_SYS_FLASH_WORD_SIZE     unsigned char
 
-#ifdef CFG_ENV_IS_IN_FLASH
-#define CFG_ENV_SECT_SIZE	0x10000	/* size of one complete sector	*/
-#define CFG_ENV_ADDR		(CFG_MONITOR_BASE-CFG_ENV_SECT_SIZE)
-#define	CFG_ENV_SIZE		0x4000	/* Total Size of Environment Sector	*/
+#ifdef CONFIG_ENV_IS_IN_FLASH
+#define CONFIG_ENV_SECT_SIZE	0x10000	/* size of one complete sector	*/
+#define CONFIG_ENV_ADDR		(CONFIG_SYS_MONITOR_BASE-CONFIG_ENV_SECT_SIZE)
+#define	CONFIG_ENV_SIZE		0x4000	/* Total Size of Environment Sector	*/
 
 /* Address and size of Redundant Environment Sector	*/
-#define CFG_ENV_ADDR_REDUND	(CFG_ENV_ADDR-CFG_ENV_SECT_SIZE)
-#define CFG_ENV_SIZE_REDUND	(CFG_ENV_SIZE)
-#endif /* CFG_ENV_IS_IN_FLASH */
+#define CONFIG_ENV_ADDR_REDUND	(CONFIG_ENV_ADDR-CONFIG_ENV_SECT_SIZE)
+#define CONFIG_ENV_SIZE_REDUND	(CONFIG_ENV_SIZE)
+#endif /* CONFIG_ENV_IS_IN_FLASH */
 
 /*-----------------------------------------------------------------------
  * NVRAM organization
  */
-#define CFG_NVRAM_BASE_ADDR	0xf0000000	/* NVRAM base address	*/
-#define CFG_NVRAM_SIZE		0x1ff8		/* NVRAM size	*/
+#define CONFIG_SYS_NVRAM_BASE_ADDR	0xf0000000	/* NVRAM base address	*/
+#define CONFIG_SYS_NVRAM_SIZE		0x1ff8		/* NVRAM size	*/
 
-#ifdef CFG_ENV_IS_IN_NVRAM
-#define CFG_ENV_SIZE		0x0ff8		/* Size of Environment vars	*/
-#define CFG_ENV_ADDR		\
-	(CFG_NVRAM_BASE_ADDR+CFG_NVRAM_SIZE-CFG_ENV_SIZE)	/* Env	*/
+#ifdef CONFIG_ENV_IS_IN_NVRAM
+#define CONFIG_ENV_SIZE		0x0ff8		/* Size of Environment vars	*/
+#define CONFIG_ENV_ADDR		\
+	(CONFIG_SYS_NVRAM_BASE_ADDR+CONFIG_SYS_NVRAM_SIZE-CONFIG_ENV_SIZE)	/* Env	*/
 #endif
 
 /*
@@ -222,48 +222,48 @@
  * BR0/1 and OR0/1 (FLASH)
  */
 
-#define FLASH_BASE0_PRELIM	CFG_FLASH_BASE	/* FLASH bank #0	*/
+#define FLASH_BASE0_PRELIM	CONFIG_SYS_FLASH_BASE	/* FLASH bank #0	*/
 #define FLASH_BASE1_PRELIM	0		/* FLASH bank #1	*/
 
 /*-----------------------------------------------------------------------
  * Definitions for initial stack pointer and data area (in data cache)
  */
 /* use on chip memory ( OCM ) for temperary stack until sdram is tested */
-#define CFG_TEMP_STACK_OCM        1
+#define CONFIG_SYS_TEMP_STACK_OCM        1
 
 /* On Chip Memory location */
-#define CFG_OCM_DATA_ADDR	0xF8000000
-#define CFG_OCM_DATA_SIZE	0x1000
-#define CFG_INIT_RAM_ADDR	CFG_OCM_DATA_ADDR /* inside of SDRAM		*/
-#define CFG_INIT_RAM_END	CFG_OCM_DATA_SIZE /* End of used area in RAM	*/
+#define CONFIG_SYS_OCM_DATA_ADDR	0xF8000000
+#define CONFIG_SYS_OCM_DATA_SIZE	0x1000
+#define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_OCM_DATA_ADDR /* inside of SDRAM		*/
+#define CONFIG_SYS_INIT_RAM_END	CONFIG_SYS_OCM_DATA_SIZE /* End of used area in RAM	*/
 
-#define CFG_GBL_DATA_SIZE      128  /* size in bytes reserved for initial data */
-#define CFG_GBL_DATA_OFFSET    (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP_OFFSET      CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_GBL_DATA_SIZE      128  /* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET    (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET      CONFIG_SYS_GBL_DATA_OFFSET
 
 /*-----------------------------------------------------------------------
  * External Bus Controller (EBC) Setup
  */
 
 /* Memory Bank 0 (Flash/SRAM) initialization                                    */
-#define CFG_EBC_PB0AP           0x04006000
-#define CFG_EBC_PB0CR           0xFFF18000  /* BAS=0xFFF,BS=1MB,BU=R/W,BW=8bit  */
+#define CONFIG_SYS_EBC_PB0AP           0x04006000
+#define CONFIG_SYS_EBC_PB0CR           0xFFF18000  /* BAS=0xFFF,BS=1MB,BU=R/W,BW=8bit  */
 
 /* Memory Bank 1 (NVRAM/RTC) initialization                                     */
-#define CFG_EBC_PB1AP           0x04041000
-#define CFG_EBC_PB1CR           0xF0018000  /* BAS=0xF00,BS=1MB,BU=R/W,BW=8bit  */
+#define CONFIG_SYS_EBC_PB1AP           0x04041000
+#define CONFIG_SYS_EBC_PB1CR           0xF0018000  /* BAS=0xF00,BS=1MB,BU=R/W,BW=8bit  */
 
 /* Memory Bank 2 (not used) initialization                                      */
-#define CFG_EBC_PB2AP           0x00000000
-#define CFG_EBC_PB2CR           0x00000000
+#define CONFIG_SYS_EBC_PB2AP           0x00000000
+#define CONFIG_SYS_EBC_PB2CR           0x00000000
 
 /* Memory Bank 2 (not used) initialization                                      */
-#define CFG_EBC_PB3AP           0x00000000
-#define CFG_EBC_PB3CR           0x00000000
+#define CONFIG_SYS_EBC_PB3AP           0x00000000
+#define CONFIG_SYS_EBC_PB3CR           0x00000000
 
 /* Memory Bank 4 (FPGA regs) initialization                                     */
-#define CFG_EBC_PB4AP           0x01815000
-#define CFG_EBC_PB4CR           0xF0318000  /* BAS=0xF03,BS=1MB,BU=R/W,BW=8bit  */
+#define CONFIG_SYS_EBC_PB4AP           0x01815000
+#define CONFIG_SYS_EBC_PB4CR           0xF0318000  /* BAS=0xF03,BS=1MB,BU=R/W,BW=8bit  */
 
 /*-----------------------------------------------------------------------
  * Definitions for Serial Presence Detect EEPROM address
@@ -283,13 +283,13 @@
  * GPIO0[28-29] - UART1 data signal input/output
  * GPIO0[30-31] - EMAC0 and EMAC1 reject packet inputs
  */
-#define CFG_GPIO0_OSRH          0x55555555
-#define CFG_GPIO0_OSRL          0x40000110
-#define CFG_GPIO0_ISR1H         0x00000000
-#define CFG_GPIO0_ISR1L         0x15555445
-#define CFG_GPIO0_TSRH          0x00000000
-#define CFG_GPIO0_TSRL          0x00000000
-#define CFG_GPIO0_TCR           0xFFFF8014
+#define CONFIG_SYS_GPIO0_OSRH          0x55555555
+#define CONFIG_SYS_GPIO0_OSRL          0x40000110
+#define CONFIG_SYS_GPIO0_ISR1H         0x00000000
+#define CONFIG_SYS_GPIO0_ISR1L         0x15555445
+#define CONFIG_SYS_GPIO0_TSRH          0x00000000
+#define CONFIG_SYS_GPIO0_TSRL          0x00000000
+#define CONFIG_SYS_GPIO0_TCR           0xFFFF8014
 
 /*-----------------------------------------------------------------------
  * Some BUBINGA stuff...
diff --git a/include/configs/c2mon.h b/include/configs/c2mon.h
index 6f0d4b0f8..4508d757a 100644
--- a/include/configs/c2mon.h
+++ b/include/configs/c2mon.h
@@ -60,7 +60,7 @@
 	"bootm"
 
 #define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
-#undef	CFG_LOADS_BAUD_CHANGE		/* don't allow baudrate change	*/
+#undef	CONFIG_SYS_LOADS_BAUD_CHANGE		/* don't allow baudrate change	*/
 
 #undef	CONFIG_WATCHDOG			/* watchdog disabled		*/
 
@@ -101,31 +101,31 @@
 /*
  * Miscellaneous configurable options
  */
-#define	CFG_LONGHELP			/* undef to save memory		*/
-#define	CFG_PROMPT		"=> "	/* Monitor Command Prompt	*/
+#define	CONFIG_SYS_LONGHELP			/* undef to save memory		*/
+#define	CONFIG_SYS_PROMPT		"=> "	/* Monitor Command Prompt	*/
 
-#undef	CFG_HUSH_PARSER			/* use "hush" command parser	*/
-#ifdef	CFG_HUSH_PARSER
-#define	CFG_PROMPT_HUSH_PS2	"> "
+#undef	CONFIG_SYS_HUSH_PARSER			/* use "hush" command parser	*/
+#ifdef	CONFIG_SYS_HUSH_PARSER
+#define	CONFIG_SYS_PROMPT_HUSH_PS2	"> "
 #endif
 
 #if defined(CONFIG_CMD_KGDB)
-#define	CFG_CBSIZE		1024	/* Console I/O Buffer Size	*/
+#define	CONFIG_SYS_CBSIZE		1024	/* Console I/O Buffer Size	*/
 #else
-#define	CFG_CBSIZE		256	/* Console I/O Buffer Size	*/
+#define	CONFIG_SYS_CBSIZE		256	/* Console I/O Buffer Size	*/
 #endif
-#define	CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define	CFG_MAXARGS		16	/* max number of command args	*/
-#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+#define	CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define	CONFIG_SYS_MAXARGS		16	/* max number of command args	*/
+#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
 
-#define CFG_MEMTEST_START	0x0400000	/* memtest works on	*/
-#define CFG_MEMTEST_END		0x0C00000	/* 4 ... 12 MB in DRAM	*/
+#define CONFIG_SYS_MEMTEST_START	0x0400000	/* memtest works on	*/
+#define CONFIG_SYS_MEMTEST_END		0x0C00000	/* 4 ... 12 MB in DRAM	*/
 
-#define	CFG_LOAD_ADDR		0x100000	/* default load address	*/
+#define	CONFIG_SYS_LOAD_ADDR		0x100000	/* default load address	*/
 
-#define	CFG_HZ			1000	/* decrementer freq: 1 ms ticks	*/
+#define	CONFIG_SYS_HZ			1000	/* decrementer freq: 1 ms ticks	*/
 
-#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
 
 /*
  * Low Level Configuration Settings
@@ -135,58 +135,58 @@
 /*-----------------------------------------------------------------------
  * Internal Memory Mapped Register
  */
-#define CFG_IMMR		0xFFF00000
+#define CONFIG_SYS_IMMR		0xFFF00000
 
 /*-----------------------------------------------------------------------
  * Definitions for initial stack pointer and data area (in DPRAM)
  */
-#define CFG_INIT_RAM_ADDR	CFG_IMMR
-#define	CFG_INIT_RAM_END	0x2F00	/* End of used area in DPRAM	*/
-#define	CFG_GBL_DATA_SIZE	64  /* size in bytes reserved for initial data */
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define	CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_IMMR
+#define	CONFIG_SYS_INIT_RAM_END	0x2F00	/* End of used area in DPRAM	*/
+#define	CONFIG_SYS_GBL_DATA_SIZE	64  /* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define	CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
 /*-----------------------------------------------------------------------
  * Start addresses for the final memory configuration
  * (Set up by the startup code)
- * Please note that CFG_SDRAM_BASE _must_ start at 0
+ * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
  */
-#define	CFG_SDRAM_BASE		0x00000000
-#define CFG_FLASH_BASE		0x40000000
+#define	CONFIG_SYS_SDRAM_BASE		0x00000000
+#define CONFIG_SYS_FLASH_BASE		0x40000000
 #if defined(DEBUG)
-#define	CFG_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor	*/
+#define	CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor	*/
 #else
-#define	CFG_MONITOR_LEN		(192 << 10)	/* Reserve 192 kB for Monitor	*/
+#define	CONFIG_SYS_MONITOR_LEN		(192 << 10)	/* Reserve 192 kB for Monitor	*/
 #endif
-#define CFG_MONITOR_BASE	CFG_FLASH_BASE
-#define	CFG_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/
+#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_FLASH_BASE
+#define	CONFIG_SYS_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/
 
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define	CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux	*/
+#define	CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux	*/
 
 /*-----------------------------------------------------------------------
  * FLASH organization
  */
-#define CFG_MAX_FLASH_BANKS	2	/* max number of memory banks		*/
-#define CFG_MAX_FLASH_SECT	67	/* max number of sectors on one chip	*/
+#define CONFIG_SYS_MAX_FLASH_BANKS	2	/* max number of memory banks		*/
+#define CONFIG_SYS_MAX_FLASH_SECT	67	/* max number of sectors on one chip	*/
 
-#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
-#define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
+#define CONFIG_SYS_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
+#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
 
-#define	CFG_ENV_IS_IN_FLASH	1
-#define	CFG_ENV_OFFSET		0x8000	/*   Offset   of Environment Sector	*/
-#define	CFG_ENV_SIZE		0x4000	/* Total Size of Environment Sector	*/
+#define	CONFIG_ENV_IS_IN_FLASH	1
+#define	CONFIG_ENV_OFFSET		0x8000	/*   Offset   of Environment Sector	*/
+#define	CONFIG_ENV_SIZE		0x4000	/* Total Size of Environment Sector	*/
 
 /*-----------------------------------------------------------------------
  * Cache Configuration
  */
-#define CFG_CACHELINE_SIZE	16	/* For all MPC8xx CPUs			*/
+#define CONFIG_SYS_CACHELINE_SIZE	16	/* For all MPC8xx CPUs			*/
 #if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT	4	/* log base 2 of the above value	*/
+#define CONFIG_SYS_CACHELINE_SHIFT	4	/* log base 2 of the above value	*/
 #endif
 
 /*-----------------------------------------------------------------------
@@ -196,10 +196,10 @@
  * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze
  */
 #if defined(CONFIG_WATCHDOG)
-#define CFG_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
+#define CONFIG_SYS_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
 			 SYPCR_SWE  | SYPCR_SWRI| SYPCR_SWP)
 #else
-#define CFG_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
+#define CONFIG_SYS_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
 #endif
 
 /*-----------------------------------------------------------------------
@@ -208,9 +208,9 @@
  * PCMCIA config., multi-function pin tri-state
  */
 #ifndef	CONFIG_CAN_DRIVER
-#define CFG_SIUMCR	(SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_MLRC01)
+#define CONFIG_SYS_SIUMCR	(SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_MLRC01)
 #else	/* we must activate GPL5 in the SIUMCR for CAN */
-#define CFG_SIUMCR	(SIUMCR_DBGC11 | SIUMCR_DBPC00 | SIUMCR_MLRC01)
+#define CONFIG_SYS_SIUMCR	(SIUMCR_DBGC11 | SIUMCR_DBPC00 | SIUMCR_MLRC01)
 #endif	/* CONFIG_CAN_DRIVER */
 
 /*-----------------------------------------------------------------------
@@ -218,20 +218,20 @@
  *-----------------------------------------------------------------------
  * Clear Reference Interrupt Status, Timebase freezing enabled
  */
-#define CFG_TBSCR	(TBSCR_REFA | TBSCR_REFB | TBSCR_TBF)
+#define CONFIG_SYS_TBSCR	(TBSCR_REFA | TBSCR_REFB | TBSCR_TBF)
 
 /*-----------------------------------------------------------------------
  * RTCSC - Real-Time Clock Status and Control Register		11-27
  *-----------------------------------------------------------------------
  */
-#define CFG_RTCSC	(RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE)
+#define CONFIG_SYS_RTCSC	(RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE)
 
 /*-----------------------------------------------------------------------
  * PISCR - Periodic Interrupt Status and Control		11-31
  *-----------------------------------------------------------------------
  * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
  */
-#define CFG_PISCR	(PISCR_PS | PISCR_PITF)
+#define CONFIG_SYS_PISCR	(PISCR_PS | PISCR_PITF)
 
 /*-----------------------------------------------------------------------
  * PLPRCR - PLL, Low-Power, and Reset Control Register		15-30
@@ -242,10 +242,10 @@
  * If this is a 80 MHz CPU, set PLL multiplication factor to 5 (5*16=80)!
  */
 #ifdef	CONFIG_80MHz	/* for 80 MHz, we use a 16 MHz clock * 5 */
-#define CFG_PLPRCR							\
+#define CONFIG_SYS_PLPRCR							\
 		( (5-1)<<PLPRCR_MF_SHIFT | PLPRCR_TEXPS | PLPRCR_TMIST )
 #else			/* up to 50 MHz we use a 1:1 clock */
-#define CFG_PLPRCR	(PLPRCR_SPLSS | PLPRCR_TEXPS | PLPRCR_TMIST)
+#define CONFIG_SYS_PLPRCR	(PLPRCR_SPLSS | PLPRCR_TEXPS | PLPRCR_TMIST)
 #endif	/* CONFIG_80MHz */
 
 /*-----------------------------------------------------------------------
@@ -256,12 +256,12 @@
  */
 #define SCCR_MASK	SCCR_EBDF11
 #ifdef	CONFIG_80MHz	/* for 80 MHz, we use a 16 MHz clock * 5 */
-#define CFG_SCCR	(/* SCCR_TBS  | */ \
+#define CONFIG_SYS_SCCR	(/* SCCR_TBS  | */ \
 			 SCCR_COM00   | SCCR_DFSYNC00 | SCCR_DFBRG00  | \
 			 SCCR_DFNL000 | SCCR_DFNH000  | SCCR_DFLCD000 | \
 			 SCCR_DFALCD00)
 #else			/* up to 50 MHz we use a 1:1 clock */
-#define CFG_SCCR	(SCCR_TBS     | \
+#define CONFIG_SYS_SCCR	(SCCR_TBS     | \
 			 SCCR_COM00   | SCCR_DFSYNC00 | SCCR_DFBRG00  | \
 			 SCCR_DFNL000 | SCCR_DFNH000  | SCCR_DFLCD000 | \
 			 SCCR_DFALCD00)
@@ -272,14 +272,14 @@
  *-----------------------------------------------------------------------
  *
  */
-#define CFG_PCMCIA_MEM_ADDR	(0xE0000000)
-#define CFG_PCMCIA_MEM_SIZE	( 64 << 20 )
-#define CFG_PCMCIA_DMA_ADDR	(0xE4000000)
-#define CFG_PCMCIA_DMA_SIZE	( 64 << 20 )
-#define CFG_PCMCIA_ATTRB_ADDR	(0xE8000000)
-#define CFG_PCMCIA_ATTRB_SIZE	( 64 << 20 )
-#define CFG_PCMCIA_IO_ADDR	(0xEC000000)
-#define CFG_PCMCIA_IO_SIZE	( 64 << 20 )
+#define CONFIG_SYS_PCMCIA_MEM_ADDR	(0xE0000000)
+#define CONFIG_SYS_PCMCIA_MEM_SIZE	( 64 << 20 )
+#define CONFIG_SYS_PCMCIA_DMA_ADDR	(0xE4000000)
+#define CONFIG_SYS_PCMCIA_DMA_SIZE	( 64 << 20 )
+#define CONFIG_SYS_PCMCIA_ATTRB_ADDR	(0xE8000000)
+#define CONFIG_SYS_PCMCIA_ATTRB_SIZE	( 64 << 20 )
+#define CONFIG_SYS_PCMCIA_IO_ADDR	(0xEC000000)
+#define CONFIG_SYS_PCMCIA_IO_SIZE	( 64 << 20 )
 
 /*-----------------------------------------------------------------------
  * PCMCIA Power Switch
@@ -312,21 +312,21 @@
 #undef	CONFIG_IDE_LED			/* LED   for ide not supported	*/
 #undef	CONFIG_IDE_RESET		/* reset for ide not supported	*/
 
-#define CFG_IDE_MAXBUS		1	/* max. 1 IDE bus		*/
-#define CFG_IDE_MAXDEVICE	1	/* max. 1 drive per IDE bus	*/
+#define CONFIG_SYS_IDE_MAXBUS		1	/* max. 1 IDE bus		*/
+#define CONFIG_SYS_IDE_MAXDEVICE	1	/* max. 1 drive per IDE bus	*/
 
-#define CFG_ATA_IDE0_OFFSET	0x0000
+#define CONFIG_SYS_ATA_IDE0_OFFSET	0x0000
 
-#define CFG_ATA_BASE_ADDR	CFG_PCMCIA_MEM_ADDR
+#define CONFIG_SYS_ATA_BASE_ADDR	CONFIG_SYS_PCMCIA_MEM_ADDR
 
 /* Offset for data I/O			*/
-#define CFG_ATA_DATA_OFFSET	(CFG_PCMCIA_MEM_SIZE + 0x320)
+#define CONFIG_SYS_ATA_DATA_OFFSET	(CONFIG_SYS_PCMCIA_MEM_SIZE + 0x320)
 
 /* Offset for normal register accesses	*/
-#define CFG_ATA_REG_OFFSET	(2 * CFG_PCMCIA_MEM_SIZE + 0x320)
+#define CONFIG_SYS_ATA_REG_OFFSET	(2 * CONFIG_SYS_PCMCIA_MEM_SIZE + 0x320)
 
 /* Offset for alternate registers	*/
-#define CFG_ATA_ALT_OFFSET	0x0100
+#define CONFIG_SYS_ATA_ALT_OFFSET	0x0100
 
 
 /*-----------------------------------------------------------------------
@@ -334,7 +334,7 @@
  *-----------------------------------------------------------------------
  *
  */
-#define CFG_DER	0
+#define CONFIG_SYS_DER	0
 
 /*
  * Init Memory Controller:
@@ -349,20 +349,20 @@
  * restrict access enough to keep SRAM working (if any)
  * but not too much to meddle with FLASH accesses
  */
-#define CFG_REMAP_OR_AM		0x80000000	/* OR addr mask */
-#define CFG_PRELIM_OR_AM	0xE0000000	/* OR addr mask */
+#define CONFIG_SYS_REMAP_OR_AM		0x80000000	/* OR addr mask */
+#define CONFIG_SYS_PRELIM_OR_AM	0xE0000000	/* OR addr mask */
 
 /* FLASH timing: ACS = 11, TRLX = 0, CSNT = 1, SCY = 5, EHTR = 1	*/
-#define CFG_OR_TIMING_FLASH	(OR_CSNT_SAM  | OR_ACS_DIV2 | OR_BI | \
+#define CONFIG_SYS_OR_TIMING_FLASH	(OR_CSNT_SAM  | OR_ACS_DIV2 | OR_BI | \
 				 OR_SCY_5_CLK | OR_EHTR)
 
-#define CFG_OR0_REMAP	(CFG_REMAP_OR_AM  | CFG_OR_TIMING_FLASH)
-#define CFG_OR0_PRELIM	(CFG_PRELIM_OR_AM | CFG_OR_TIMING_FLASH)
-#define CFG_BR0_PRELIM	((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_V )
+#define CONFIG_SYS_OR0_REMAP	(CONFIG_SYS_REMAP_OR_AM  | CONFIG_SYS_OR_TIMING_FLASH)
+#define CONFIG_SYS_OR0_PRELIM	(CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_FLASH)
+#define CONFIG_SYS_BR0_PRELIM	((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_V )
 
-#define CFG_OR1_REMAP	CFG_OR0_REMAP
-#define CFG_OR1_PRELIM	CFG_OR0_PRELIM
-#define CFG_BR1_PRELIM	((FLASH_BASE1_PRELIM & BR_BA_MSK) | BR_V )
+#define CONFIG_SYS_OR1_REMAP	CONFIG_SYS_OR0_REMAP
+#define CONFIG_SYS_OR1_PRELIM	CONFIG_SYS_OR0_PRELIM
+#define CONFIG_SYS_BR1_PRELIM	((FLASH_BASE1_PRELIM & BR_BA_MSK) | BR_V )
 
 /*
  * BR2/3 and OR2/3 (SDRAM)
@@ -373,19 +373,19 @@
 #define	SDRAM_MAX_SIZE		0x04000000	/* max 64 MB per bank	*/
 
 /* SDRAM timing: Multiplexed addresses, GPL5 output to GPL5_A (don't care)	*/
-#define CFG_OR_TIMING_SDRAM	0x00000A00
+#define CONFIG_SYS_OR_TIMING_SDRAM	0x00000A00
 
-#define CFG_OR2_PRELIM	(CFG_PRELIM_OR_AM | CFG_OR_TIMING_SDRAM )
-#define CFG_BR2_PRELIM	((SDRAM_BASE2_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
+#define CONFIG_SYS_OR2_PRELIM	(CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_SDRAM )
+#define CONFIG_SYS_BR2_PRELIM	((SDRAM_BASE2_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
 
 #ifndef	CONFIG_CAN_DRIVER
-#define	CFG_OR3_PRELIM	CFG_OR2_PRELIM
-#define CFG_BR3_PRELIM	((SDRAM_BASE3_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
+#define	CONFIG_SYS_OR3_PRELIM	CONFIG_SYS_OR2_PRELIM
+#define CONFIG_SYS_BR3_PRELIM	((SDRAM_BASE3_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
 #else	/* CAN uses CS3#, so we can have only one SDRAM bank anyway */
-#define	CFG_CAN_BASE		0xC0000000	/* CAN mapped at 0xC0000000	*/
-#define CFG_CAN_OR_AM		0xFFFF8000	/* 32 kB address mask		*/
-#define CFG_OR3_CAN		(CFG_CAN_OR_AM | OR_G5LA | OR_BI)
-#define CFG_BR3_CAN		((CFG_CAN_BASE & BR_BA_MSK) | \
+#define	CONFIG_SYS_CAN_BASE		0xC0000000	/* CAN mapped at 0xC0000000	*/
+#define CONFIG_SYS_CAN_OR_AM		0xFFFF8000	/* 32 kB address mask		*/
+#define CONFIG_SYS_OR3_CAN		(CONFIG_SYS_CAN_OR_AM | OR_G5LA | OR_BI)
+#define CONFIG_SYS_BR3_CAN		((CONFIG_SYS_CAN_BASE & BR_BA_MSK) | \
 					BR_PS_8 | BR_MS_UPMB | BR_V )
 #endif	/* CONFIG_CAN_DRIVER */
 
@@ -394,26 +394,26 @@
  */
 
 /* periodic timer for refresh */
-#define CFG_MAMR_PTA	97		/* start with divider for 100 MHz	*/
+#define CONFIG_SYS_MAMR_PTA	97		/* start with divider for 100 MHz	*/
 
 /* refresh rate 15.6 us (= 64 ms / 4K = 62.4 / quad bursts) for <= 128 MBit	*/
-#define CFG_MPTPR_2BK_4K	MPTPR_PTP_DIV16		/* setting for 2 banks	*/
-#define CFG_MPTPR_1BK_4K	MPTPR_PTP_DIV32		/* setting for 1 bank	*/
+#define CONFIG_SYS_MPTPR_2BK_4K	MPTPR_PTP_DIV16		/* setting for 2 banks	*/
+#define CONFIG_SYS_MPTPR_1BK_4K	MPTPR_PTP_DIV32		/* setting for 1 bank	*/
 
 /* refresh rate 7.8 us (= 64 ms / 8K = 31.2 / quad bursts) for 256 MBit		*/
-#define CFG_MPTPR_2BK_8K	MPTPR_PTP_DIV8		/* setting for 2 banks	*/
-#define CFG_MPTPR_1BK_8K	MPTPR_PTP_DIV16		/* setting for 1 bank	*/
+#define CONFIG_SYS_MPTPR_2BK_8K	MPTPR_PTP_DIV8		/* setting for 2 banks	*/
+#define CONFIG_SYS_MPTPR_1BK_8K	MPTPR_PTP_DIV16		/* setting for 1 bank	*/
 
 /*
  * MAMR settings for SDRAM
  */
 
 /* 8 column SDRAM */
-#define CFG_MAMR_8COL	((CFG_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
+#define CONFIG_SYS_MAMR_8COL	((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
 			 MAMR_AMA_TYPE_0 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A11 |	\
 			 MAMR_RLFA_1X	 | MAMR_WLFA_1X	   | MAMR_TLFA_4X)
 /* 9 column SDRAM */
-#define CFG_MAMR_9COL	((CFG_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
+#define CONFIG_SYS_MAMR_9COL	((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
 			 MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 |	\
 			 MAMR_RLFA_1X	 | MAMR_WLFA_1X	   | MAMR_TLFA_4X)
 
diff --git a/include/configs/canmb.h b/include/configs/canmb.h
index 38714cc30..ff7b6e5ca 100644
--- a/include/configs/canmb.h
+++ b/include/configs/canmb.h
@@ -33,7 +33,7 @@
 #define CONFIG_MPC5200		1	/* More exactly a MPC5200 */
 #define CONFIG_CANMB		1	/* ... on canmb board - we need this for FEC.C */
 
-#define CFG_MPC5XXX_CLKIN	33000000 /* ... running at 33.000000MHz */
+#define CONFIG_SYS_MPC5XXX_CLKIN	33000000 /* ... running at 33.000000MHz */
 
 #define BOOTFLAG_COLD		0x01	/* Normal Power-On: Boot from FLASH  */
 #define BOOTFLAG_WARM		0x02	/* Software reboot	     */
@@ -47,7 +47,7 @@
  */
 #define CONFIG_PSC_CONSOLE	1	/* console is on PSC1 */
 #define CONFIG_BAUDRATE		115200	/* ... at 115200 bps */
-#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
 
 
 /*
@@ -78,8 +78,8 @@
  * MUST be low boot - HIGHBOOT is not supported anymore
  */
 #if (TEXT_BASE == 0xFE000000)		/* Boot low with 32 MB Flash */
-#   define CFG_LOWBOOT		1
-#   define CFG_LOWBOOT16	1
+#   define CONFIG_SYS_LOWBOOT		1
+#   define CONFIG_SYS_LOWBOOT16	1
 #else
 #   error "TEXT_BASE must be 0xFE000000"
 #endif
@@ -117,57 +117,57 @@
 /*
  * IPB Bus clocking configuration.
  */
-#undef CFG_IPBCLK_EQUALS_XLBCLK		/* define for 133MHz speed */
+#undef CONFIG_SYS_IPBCLK_EQUALS_XLBCLK		/* define for 133MHz speed */
 
 /*
  * Flash configuration, expect one 16 Megabyte Bank at most
  */
-#define CFG_FLASH_BASE		0xFE000000
-#define CFG_FLASH_SIZE		0x02000000
-#define CFG_MAX_FLASH_BANKS	1	/* max num of memory banks      */
-#define CFG_MAX_FLASH_SECT	256	/* max num of sects on one chip */
+#define CONFIG_SYS_FLASH_BASE		0xFE000000
+#define CONFIG_SYS_FLASH_SIZE		0x02000000
+#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max num of memory banks      */
+#define CONFIG_SYS_MAX_FLASH_SECT	256	/* max num of sects on one chip */
 
-#define CFG_FLASH_ERASE_TOUT	240000	/* Flash Erase Timeout (in ms)  */
-#define CFG_FLASH_WRITE_TOUT	500	/* Flash Write Timeout (in ms)  */
+#define CONFIG_SYS_FLASH_ERASE_TOUT	240000	/* Flash Erase Timeout (in ms)  */
+#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Flash Write Timeout (in ms)  */
 
 #define CONFIG_FLASH_CFI_DRIVER
-#define CFG_FLASH_CFI
-#define CFG_FLASH_EMPTY_INFO
+#define CONFIG_SYS_FLASH_CFI
+#define CONFIG_SYS_FLASH_EMPTY_INFO
 
 /*
  * Environment settings
  */
-#define CFG_ENV_IS_IN_FLASH	1
-#define CFG_ENV_OFFSET		(2*128*1024)
-#define CFG_ENV_SIZE		0x2000
-#define CFG_ENV_SECT_SIZE       (128*1024)
+#define CONFIG_ENV_IS_IN_FLASH	1
+#define CONFIG_ENV_OFFSET		(2*128*1024)
+#define CONFIG_ENV_SIZE		0x2000
+#define CONFIG_ENV_SECT_SIZE       (128*1024)
 
 /*
  * Memory map
  *
  * Warning!!! with the current BestComm Task, MBAR MUST BE set to 0xf0000000
  */
-#define CFG_MBAR			0xf0000000	/* DO NOT CHANGE this */
-#define CFG_SDRAM_BASE		0x00000000
-#define CFG_DEFAULT_MBAR	0x80000000
+#define CONFIG_SYS_MBAR			0xf0000000	/* DO NOT CHANGE this */
+#define CONFIG_SYS_SDRAM_BASE		0x00000000
+#define CONFIG_SYS_DEFAULT_MBAR	0x80000000
 
 /* Use SRAM until RAM will be available */
-#define CFG_INIT_RAM_ADDR	MPC5XXX_SRAM
-#define CFG_INIT_RAM_END	MPC5XXX_SRAM_SIZE	/* End of used area in DPRAM */
+#define CONFIG_SYS_INIT_RAM_ADDR	MPC5XXX_SRAM
+#define CONFIG_SYS_INIT_RAM_END	MPC5XXX_SRAM_SIZE	/* End of used area in DPRAM */
 
 
-#define CFG_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
-#define CFG_MONITOR_BASE    TEXT_BASE
-#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
-#   define CFG_RAMBOOT		1
+#define CONFIG_SYS_MONITOR_BASE    TEXT_BASE
+#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
+#   define CONFIG_SYS_RAMBOOT		1
 #endif
 
-#define CFG_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor	*/
-#define CFG_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/
-#define CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
+#define CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor	*/
+#define CONFIG_SYS_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/
+#define CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
 
 /*
  * Ethernet configuration
@@ -180,51 +180,51 @@
  * PCI disabled
  * Ethernet 100 with MD
  */
-#define CFG_GPS_PORT_CONFIG	0x00058444
+#define CONFIG_SYS_GPS_PORT_CONFIG	0x00058444
 
 /*
  * Miscellaneous configurable options
  */
-#define CFG_LONGHELP			/* undef to save memory	    */
-#define CFG_PROMPT		"=> "	/* Monitor Command Prompt   */
+#define CONFIG_SYS_LONGHELP			/* undef to save memory	    */
+#define CONFIG_SYS_PROMPT		"=> "	/* Monitor Command Prompt   */
 #if defined(CONFIG_CMD_KGDB)
-#  define CFG_CBSIZE		1024	/* Console I/O Buffer Size  */
+#  define CONFIG_SYS_CBSIZE		1024	/* Console I/O Buffer Size  */
 #else
-#  define CFG_CBSIZE		256	/* Console I/O Buffer Size  */
+#  define CONFIG_SYS_CBSIZE		256	/* Console I/O Buffer Size  */
 #endif
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16)	/* Print Buffer Size */
-#define CFG_MAXARGS		16		/* max number of command args	*/
-#define CFG_BARGSIZE		CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)	/* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS		16		/* max number of command args	*/
+#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
 
-#define CFG_MEMTEST_START	0x00100000	/* memtest works on */
-#define CFG_MEMTEST_END		0x01f00000	/* 1 ... 31 MB in DRAM	*/
+#define CONFIG_SYS_MEMTEST_START	0x00100000	/* memtest works on */
+#define CONFIG_SYS_MEMTEST_END		0x01f00000	/* 1 ... 31 MB in DRAM	*/
 
-#define CFG_LOAD_ADDR		0x200000	/* default load address */
+#define CONFIG_SYS_LOAD_ADDR		0x200000	/* default load address */
 
-#define CFG_HZ			1000	/* decrementer freq: 1 ms ticks */
+#define CONFIG_SYS_HZ			1000	/* decrementer freq: 1 ms ticks */
 
 #define CONFIG_RTC_MPC5200	1	/* use internal MPC5200 RTC */
 
-#define CFG_CACHELINE_SIZE	32	/* For MPC5xxx CPUs */
+#define CONFIG_SYS_CACHELINE_SIZE	32	/* For MPC5xxx CPUs */
 #if defined(CONFIG_CMD_KGDB)
-#  define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value */
+#  define CONFIG_SYS_CACHELINE_SHIFT	5	/* log base 2 of the above value */
 #endif
 
 /*
  * Various low-level settings
  */
-#define CFG_HID0_INIT		HID0_ICE | HID0_ICFI
-#define CFG_HID0_FINAL		HID0_ICE
+#define CONFIG_SYS_HID0_INIT		HID0_ICE | HID0_ICFI
+#define CONFIG_SYS_HID0_FINAL		HID0_ICE
 
-#define CFG_BOOTCS_START	CFG_FLASH_BASE
-#define CFG_BOOTCS_SIZE		CFG_FLASH_SIZE
-#define CFG_BOOTCS_CFG		0x00047D01
-#define CFG_CS0_START		CFG_FLASH_BASE
-#define CFG_CS0_SIZE		CFG_FLASH_SIZE
+#define CONFIG_SYS_BOOTCS_START	CONFIG_SYS_FLASH_BASE
+#define CONFIG_SYS_BOOTCS_SIZE		CONFIG_SYS_FLASH_SIZE
+#define CONFIG_SYS_BOOTCS_CFG		0x00047D01
+#define CONFIG_SYS_CS0_START		CONFIG_SYS_FLASH_BASE
+#define CONFIG_SYS_CS0_SIZE		CONFIG_SYS_FLASH_SIZE
 
-#define CFG_CS_BURST		0x00000000
-#define CFG_CS_DEADCYCLE	0x33333333
+#define CONFIG_SYS_CS_BURST		0x00000000
+#define CONFIG_SYS_CS_DEADCYCLE	0x33333333
 
-#define CFG_RESET_ADDRESS	0x7f000000
+#define CONFIG_SYS_RESET_ADDRESS	0x7f000000
 
 #endif /* __CONFIG_H */
diff --git a/include/configs/canyonlands.h b/include/configs/canyonlands.h
index 3b5b28093..faf630496 100644
--- a/include/configs/canyonlands.h
+++ b/include/configs/canyonlands.h
@@ -27,14 +27,24 @@
 /*-----------------------------------------------------------------------
  * High Level Configuration Options
  *----------------------------------------------------------------------*/
-/* This config file is used for Canyonlands (460EX) and Glacier (460GT)	*/
-#ifndef CONFIG_CANYONLANDS
+/*
+ * This config file is used for Canyonlands (460EX) Glacier (460GT)
+ * and Arches dual (460GT)
+ */
+#ifdef CONFIG_CANYONLANDS
+#define CONFIG_460EX		1	/* Specific PPC460EX		*/
+#define CONFIG_HOSTNAME		canyonlands
+#else
 #define CONFIG_460GT		1	/* Specific PPC460GT		*/
+#ifdef CONFIG_GLACIER
 #define CONFIG_HOSTNAME		glacier
 #else
-#define CONFIG_460EX		1	/* Specific PPC460EX		*/
-#define CONFIG_HOSTNAME		canyonlands
+#define CONFIG_HOSTNAME		arches
+#define CONFIG_USE_NETDEV	eth1
+#define CONFIG_BD_NUM_CPUS	2
 #endif
+#endif
+
 #define CONFIG_440		1
 #define CONFIG_4xx		1	/* ... PPC4xx family */
 
@@ -54,51 +64,60 @@
  * Base addresses -- Note these are effective addresses where the
  * actual resources get mapped (not physical addresses)
  *----------------------------------------------------------------------*/
-#define CFG_PCI_MEMBASE		0x80000000	/* mapped PCI memory	*/
-#define CFG_PCI_BASE		0xd0000000	/* internal PCI regs	*/
-#define CFG_PCI_TARGBASE	CFG_PCI_MEMBASE
+#define CONFIG_SYS_PCI_MEMBASE		0x80000000	/* mapped PCI memory	*/
+#define CONFIG_SYS_PCI_BASE		0xd0000000	/* internal PCI regs	*/
+#define CONFIG_SYS_PCI_TARGBASE	CONFIG_SYS_PCI_MEMBASE
 
-#define CFG_PCIE_MEMBASE	0xb0000000	/* mapped PCIe memory	*/
-#define CFG_PCIE_MEMSIZE	0x08000000	/* smallest incr for PCIe port */
-#define CFG_PCIE_BASE		0xc4000000	/* PCIe UTL regs */
+#define CONFIG_SYS_PCIE_MEMBASE	0xb0000000	/* mapped PCIe memory	*/
+#define CONFIG_SYS_PCIE_MEMSIZE	0x08000000	/* smallest incr for PCIe port */
+#define CONFIG_SYS_PCIE_BASE		0xc4000000	/* PCIe UTL regs */
 
-#define CFG_PCIE0_CFGBASE	0xc0000000
-#define CFG_PCIE1_CFGBASE	0xc1000000
-#define CFG_PCIE0_XCFGBASE	0xc3000000
-#define CFG_PCIE1_XCFGBASE	0xc3001000
+#define CONFIG_SYS_PCIE0_CFGBASE	0xc0000000
+#define CONFIG_SYS_PCIE1_CFGBASE	0xc1000000
+#define CONFIG_SYS_PCIE0_XCFGBASE	0xc3000000
+#define CONFIG_SYS_PCIE1_XCFGBASE	0xc3001000
 
-#define	CFG_PCIE0_UTLBASE	0xc08010000ULL	/* 36bit physical addr	*/
+#define	CONFIG_SYS_PCIE0_UTLBASE	0xc08010000ULL	/* 36bit physical addr	*/
 
 /* base address of inbound PCIe window */
-#define CFG_PCIE_INBOUND_BASE	0x000000000ULL	/* 36bit physical addr	*/
+#define CONFIG_SYS_PCIE_INBOUND_BASE	0x000000000ULL	/* 36bit physical addr	*/
 
 /* EBC stuff */
-#define CFG_NAND_ADDR		0xE0000000
-#define CFG_BCSR_BASE		0xE1000000
-#define CFG_BOOT_BASE_ADDR	0xFF000000	/* EBC Boot Space: 0xFF000000	*/
-#define CFG_FLASH_BASE		0xFC000000	/* later mapped to this addr	*/
-#define CFG_FLASH_BASE_PHYS_H	0x4
-#define CFG_FLASH_BASE_PHYS_L	0xCC000000
-#define CFG_FLASH_BASE_PHYS	(((u64)CFG_FLASH_BASE_PHYS_H << 32) | \
-				 (u64)CFG_FLASH_BASE_PHYS_L)
-#define CFG_FLASH_SIZE		(64 << 20)
+#if !defined(CONFIG_ARCHES)
+#define CONFIG_SYS_BCSR_BASE		0xE1000000
+#define CONFIG_SYS_FLASH_BASE		0xFC000000	/* later mapped to this addr */
+#define CONFIG_SYS_FLASH_SIZE		(64 << 20)
+#else
+#define CONFIG_SYS_FPGA_BASE		0xE1000000
+#define CONFIG_SYS_CPLD_ADDR		(CONFIG_SYS_FPGA_BASE + 0x00080000)
+#define CONFIG_SYS_CPLD_DATA		(CONFIG_SYS_FPGA_BASE + 0x00080002)
+#define CONFIG_SYS_FLASH_BASE		0xFE000000	/* later mapped to this addr  */
+#define CONFIG_SYS_FLASH_SIZE		(32 << 20)
+#endif
 
-#define CFG_OCM_BASE		0xE3000000	/* OCM: 16k		*/
-#define CFG_SRAM_BASE		0xE8000000	/* SRAM: 256k		*/
-#define CFG_LOCAL_CONF_REGS	0xEF000000
+#define CONFIG_SYS_NAND_ADDR		0xE0000000
+#define CONFIG_SYS_BOOT_BASE_ADDR	0xFF000000	/* EBC Boot Space: 0xFF000000 */
+#define CONFIG_SYS_FLASH_BASE_PHYS_H	0x4
+#define CONFIG_SYS_FLASH_BASE_PHYS_L	0xCC000000
+#define CONFIG_SYS_FLASH_BASE_PHYS	(((u64)CONFIG_SYS_FLASH_BASE_PHYS_H << 32) |	\
+					 (u64)CONFIG_SYS_FLASH_BASE_PHYS_L)
 
-#define CFG_PERIPHERAL_BASE	0xEF600000	/* internal peripherals */
+#define CONFIG_SYS_OCM_BASE		0xE3000000	/* OCM: 64k		*/
+#define CONFIG_SYS_SRAM_BASE		0xE8000000	/* SRAM: 256k		*/
+#define CONFIG_SYS_LOCAL_CONF_REGS	0xEF000000
 
-#define CFG_AHB_BASE		0xE2000000	/* internal AHB peripherals	*/
+#define CONFIG_SYS_PERIPHERAL_BASE	0xEF600000	/* internal peripherals */
+
+#define CONFIG_SYS_AHB_BASE		0xE2000000	/* internal AHB peripherals	*/
 
 /*-----------------------------------------------------------------------
  * Initial RAM & stack pointer (placed in OCM)
  *----------------------------------------------------------------------*/
-#define CFG_INIT_RAM_ADDR	CFG_OCM_BASE	/* OCM			*/
-#define CFG_INIT_RAM_END	(4 << 10)
-#define CFG_GBL_DATA_SIZE	256		/* num bytes initial data */
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_OCM_BASE	/* OCM			*/
+#define CONFIG_SYS_INIT_RAM_END	(4 << 10)
+#define CONFIG_SYS_GBL_DATA_SIZE	256		/* num bytes initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
 /*-----------------------------------------------------------------------
  * Serial Port
@@ -112,12 +131,12 @@
  * Define here the location of the environment variables (FLASH).
  */
 #if !defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL)
-#define	CFG_ENV_IS_IN_FLASH	1	/* use FLASH for environment vars */
-#define CFG_NAND_CS		3	/* NAND chip connected to CSx */
+#define	CONFIG_ENV_IS_IN_FLASH	1	/* use FLASH for environment vars */
+#define CONFIG_SYS_NAND_CS		3	/* NAND chip connected to CSx */
 #else
-#define	CFG_ENV_IS_IN_NAND	1	/* use NAND for environment vars  */
-#define CFG_NAND_CS		0	/* NAND chip connected to CSx */
-#define CFG_ENV_IS_EMBEDDED	1	/* use embedded environment */
+#define	CONFIG_ENV_IS_IN_NAND	1	/* use NAND for environment vars  */
+#define CONFIG_SYS_NAND_CS		0	/* NAND chip connected to CSx */
+#define CONFIG_ENV_IS_EMBEDDED	1	/* use embedded environment */
 #endif
 
 /*
@@ -141,88 +160,89 @@
  * This is the first official implementation of booting from 2k page sized
  * NAND devices (e.g. Micron 29F2G08AA 256Mbit * 8)
  */
-#define CFG_NAND_BOOT_SPL_SRC	0xfffff000	/* SPL location		      */
-#define CFG_NAND_BOOT_SPL_SIZE	(4 << 10)	/* SPL size		      */
-#define CFG_NAND_BOOT_SPL_DST	(CFG_OCM_BASE + (12 << 10)) /* Copy SPL here  */
-#define CFG_NAND_U_BOOT_DST	0x01000000	/* Load NUB to this addr      */
-#define CFG_NAND_U_BOOT_START	CFG_NAND_U_BOOT_DST	/* Start NUB from     */
+#define CONFIG_SYS_NAND_BOOT_SPL_SRC	0xfffff000	/* SPL location		      */
+#define CONFIG_SYS_NAND_BOOT_SPL_SIZE	(4 << 10)	/* SPL size		      */
+#define CONFIG_SYS_NAND_BOOT_SPL_DST	(CONFIG_SYS_OCM_BASE + (12 << 10)) /* Copy SPL here  */
+#define CONFIG_SYS_NAND_U_BOOT_DST	0x01000000	/* Load NUB to this addr      */
+#define CONFIG_SYS_NAND_U_BOOT_START	CONFIG_SYS_NAND_U_BOOT_DST	/* Start NUB from     */
 							/*   this addr	      */
-#define CFG_NAND_BOOT_SPL_DELTA	(CFG_NAND_BOOT_SPL_SRC - CFG_NAND_BOOT_SPL_DST)
+#define CONFIG_SYS_NAND_BOOT_SPL_DELTA	(CONFIG_SYS_NAND_BOOT_SPL_SRC - CONFIG_SYS_NAND_BOOT_SPL_DST)
 
 /*
  * Define the partitioning of the NAND chip (only RAM U-Boot is needed here)
  */
-#define CFG_NAND_U_BOOT_OFFS	(128 << 10)	/* Offset to RAM U-Boot image */
-#define CFG_NAND_U_BOOT_SIZE	(1 << 20)	/* Size of RAM U-Boot image   */
+#define CONFIG_SYS_NAND_U_BOOT_OFFS	(128 << 10)	/* Offset to RAM U-Boot image */
+#define CONFIG_SYS_NAND_U_BOOT_SIZE	(1 << 20)	/* Size of RAM U-Boot image   */
 
 /*
  * Now the NAND chip has to be defined (no autodetection used!)
  */
-#define CFG_NAND_PAGE_SIZE	(2 << 10)	/* NAND chip page size	      */
-#define CFG_NAND_BLOCK_SIZE	(128 << 10)	/* NAND chip block size	      */
-#define CFG_NAND_PAGE_COUNT	(CFG_NAND_BLOCK_SIZE / CFG_NAND_PAGE_SIZE)
+#define CONFIG_SYS_NAND_PAGE_SIZE	(2 << 10)	/* NAND chip page size	      */
+#define CONFIG_SYS_NAND_BLOCK_SIZE	(128 << 10)	/* NAND chip block size	      */
+#define CONFIG_SYS_NAND_PAGE_COUNT	(CONFIG_SYS_NAND_BLOCK_SIZE / CONFIG_SYS_NAND_PAGE_SIZE)
 						/* NAND chip page count	      */
-#define CFG_NAND_BAD_BLOCK_POS	0		/* Location of bad block marker*/
-#define CFG_NAND_5_ADDR_CYCLE			/* Fifth addr used (<=128MB)  */
-
-#define CFG_NAND_ECCSIZE	256
-#define CFG_NAND_ECCBYTES	3
-#define CFG_NAND_ECCSTEPS	(CFG_NAND_PAGE_SIZE / CFG_NAND_ECCSIZE)
-#define CFG_NAND_OOBSIZE	64
-#define CFG_NAND_ECCTOTAL	(CFG_NAND_ECCBYTES * CFG_NAND_ECCSTEPS)
-#define CFG_NAND_ECCPOS		{40, 41, 42, 43, 44, 45, 46, 47, \
+#define CONFIG_SYS_NAND_BAD_BLOCK_POS	0		/* Location of bad block marker*/
+#define CONFIG_SYS_NAND_5_ADDR_CYCLE			/* Fifth addr used (<=128MB)  */
+
+#define CONFIG_SYS_NAND_ECCSIZE	256
+#define CONFIG_SYS_NAND_ECCBYTES	3
+#define CONFIG_SYS_NAND_ECCSTEPS	(CONFIG_SYS_NAND_PAGE_SIZE / CONFIG_SYS_NAND_ECCSIZE)
+#define CONFIG_SYS_NAND_OOBSIZE	64
+#define CONFIG_SYS_NAND_ECCTOTAL	(CONFIG_SYS_NAND_ECCBYTES * CONFIG_SYS_NAND_ECCSTEPS)
+#define CONFIG_SYS_NAND_ECCPOS		{40, 41, 42, 43, 44, 45, 46, 47, \
 				 48, 49, 50, 51, 52, 53, 54, 55, \
 				 56, 57, 58, 59, 60, 61, 62, 63}
 
-#ifdef CFG_ENV_IS_IN_NAND
+#ifdef CONFIG_ENV_IS_IN_NAND
 /*
  * For NAND booting the environment is embedded in the U-Boot image. Please take
  * look at the file board/amcc/canyonlands/u-boot-nand.lds for details.
  */
-#define CFG_ENV_SIZE		CFG_NAND_BLOCK_SIZE
-#define CFG_ENV_OFFSET		(CFG_NAND_U_BOOT_OFFS + CFG_ENV_SIZE)
-#define CFG_ENV_OFFSET_REDUND	(CFG_ENV_OFFSET + CFG_ENV_SIZE)
+#define CONFIG_ENV_SIZE		CONFIG_SYS_NAND_BLOCK_SIZE
+#define CONFIG_ENV_OFFSET		(CONFIG_SYS_NAND_U_BOOT_OFFS + CONFIG_ENV_SIZE)
+#define CONFIG_ENV_OFFSET_REDUND	(CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)
 #endif
 
 /*-----------------------------------------------------------------------
  * FLASH related
  *----------------------------------------------------------------------*/
-#define CFG_FLASH_CFI			/* The flash is CFI compatible	*/
+#define CONFIG_SYS_FLASH_CFI			/* The flash is CFI compatible	*/
 #define CONFIG_FLASH_CFI_DRIVER		/* Use common CFI driver	*/
-#define CFG_FLASH_CFI_AMD_RESET	1	/* Use AMD (Spansion) reset cmd */
+#define CONFIG_SYS_FLASH_CFI_AMD_RESET	1	/* Use AMD (Spansion) reset cmd */
 
-#define CFG_FLASH_BANKS_LIST    {CFG_FLASH_BASE}
-#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
-#define CFG_MAX_FLASH_SECT	512	/* max number of sectors on one chip	*/
+#define CONFIG_SYS_FLASH_BANKS_LIST    {CONFIG_SYS_FLASH_BASE}
+#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
+#define CONFIG_SYS_MAX_FLASH_SECT	512	/* max number of sectors on one chip	*/
 
-#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
-#define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
+#define CONFIG_SYS_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
+#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
 
-#define CFG_FLASH_USE_BUFFER_WRITE 1	/* use buffered writes (20x faster)	*/
-#define CFG_FLASH_EMPTY_INFO		/* print 'E' for empty sector on flinfo */
+#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1	/* use buffered writes (20x faster)	*/
+#define CONFIG_SYS_FLASH_EMPTY_INFO		/* print 'E' for empty sector on flinfo */
 
-#ifdef CFG_ENV_IS_IN_FLASH
-#define CFG_ENV_SECT_SIZE	0x20000		/* size of one complete sector	*/
-#define CFG_ENV_ADDR		(CFG_MONITOR_BASE - CFG_ENV_SECT_SIZE)
-#define	CFG_ENV_SIZE		0x4000	/* Total Size of Environment Sector	*/
+#ifdef CONFIG_ENV_IS_IN_FLASH
+#define CONFIG_ENV_SECT_SIZE	0x20000		/* size of one complete sector	*/
+#define CONFIG_ENV_ADDR		(CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
+#define	CONFIG_ENV_SIZE		0x4000	/* Total Size of Environment Sector	*/
 
 /* Address and size of Redundant Environment Sector	*/
-#define CFG_ENV_ADDR_REDUND	(CFG_ENV_ADDR - CFG_ENV_SECT_SIZE)
-#define CFG_ENV_SIZE_REDUND	(CFG_ENV_SIZE)
-#endif /* CFG_ENV_IS_IN_FLASH */
+#define CONFIG_ENV_ADDR_REDUND	(CONFIG_ENV_ADDR - CONFIG_ENV_SECT_SIZE)
+#define CONFIG_ENV_SIZE_REDUND	(CONFIG_ENV_SIZE)
+#endif /* CONFIG_ENV_IS_IN_FLASH */
 
 /*-----------------------------------------------------------------------
  * NAND-FLASH related
  *----------------------------------------------------------------------*/
-#define CFG_MAX_NAND_DEVICE	1
+#define CONFIG_SYS_MAX_NAND_DEVICE	1
 #define NAND_MAX_CHIPS		1
-#define CFG_NAND_BASE		(CFG_NAND_ADDR + CFG_NAND_CS)
-#define CFG_NAND_SELECT_DEVICE  1	/* nand driver supports mutipl. chips	*/
+#define CONFIG_SYS_NAND_BASE		(CONFIG_SYS_NAND_ADDR + CONFIG_SYS_NAND_CS)
+#define CONFIG_SYS_NAND_SELECT_DEVICE  1	/* nand driver supports mutipl. chips	*/
 
 /*------------------------------------------------------------------------------
  * DDR SDRAM
  *----------------------------------------------------------------------------*/
 #if !defined(CONFIG_NAND_U_BOOT)
+#if !defined(CONFIG_ARCHES)
 /*
  * NAND booting U-Boot version uses a fixed initialization, since the whole
  * I2C SPD DIMM autodetection/calibration doesn't fit into the 4k of boot
@@ -232,41 +252,112 @@
 #define SPD_EEPROM_ADDRESS	{0x50, 0x51}	/* SPD i2c spd addresses*/
 #define CONFIG_DDR_ECC		1	/* with ECC support		*/
 #define CONFIG_DDR_RQDC_FIXED	0x80000038 /* fixed value for RQDC	*/
-#endif
-#define CFG_MBYTES_SDRAM	512	/* 512MB			*/
+
+#else /* defined(CONFIG_ARCHES) */
+
+#define CONFIG_AUTOCALIB	"silent\0"	/* default is non-verbose    */
+
+#define CONFIG_PPC4xx_DDR_AUTOCALIBRATION	/* IBM DDR autocalibration   */
+#define DEBUG_PPC4xx_DDR_AUTOCALIBRATION	/* dynamic DDR autocal debug */
+#undef CONFIG_PPC4xx_DDR_METHOD_A
+
+/* DDR1/2 SDRAM Device Control Register Data Values */
+/* Memory Queue */
+#define CONFIG_SYS_SDRAM_R0BAS		0x0000f000
+#define CONFIG_SYS_SDRAM_R1BAS		0x00000000
+#define CONFIG_SYS_SDRAM_R2BAS		0x00000000
+#define CONFIG_SYS_SDRAM_R3BAS		0x00000000
+#define CONFIG_SYS_SDRAM_PLBADDULL	0x00000000
+#define CONFIG_SYS_SDRAM_PLBADDUHB	0x00000008
+#define CONFIG_SYS_SDRAM_CONF1LL	0x00001080
+#define CONFIG_SYS_SDRAM_CONF1HB	0x00001080
+#define CONFIG_SYS_SDRAM_CONFPATHB	0x10a68000
+
+/* SDRAM Controller */
+#define CONFIG_SYS_SDRAM0_MB0CF		0x00000701
+#define CONFIG_SYS_SDRAM0_MB1CF		0x00000000
+#define CONFIG_SYS_SDRAM0_MB2CF		0x00000000
+#define CONFIG_SYS_SDRAM0_MB3CF		0x00000000
+#define CONFIG_SYS_SDRAM0_MCOPT1	0x05322000
+#define CONFIG_SYS_SDRAM0_MCOPT2	0x00000000
+#define CONFIG_SYS_SDRAM0_MODT0		0x01000000
+#define CONFIG_SYS_SDRAM0_MODT1		0x00000000
+#define CONFIG_SYS_SDRAM0_MODT2		0x00000000
+#define CONFIG_SYS_SDRAM0_MODT3		0x00000000
+#define CONFIG_SYS_SDRAM0_CODT		0x00800021
+#define CONFIG_SYS_SDRAM0_RTR		0x06180000
+#define CONFIG_SYS_SDRAM0_INITPLR0	0xb5380000
+#define CONFIG_SYS_SDRAM0_INITPLR1	0x82100400
+#define CONFIG_SYS_SDRAM0_INITPLR2	0x80820000
+#define CONFIG_SYS_SDRAM0_INITPLR3	0x80830000
+#define CONFIG_SYS_SDRAM0_INITPLR4	0x80810040
+#define CONFIG_SYS_SDRAM0_INITPLR5	0x80800532
+#define CONFIG_SYS_SDRAM0_INITPLR6	0x82100400
+#define CONFIG_SYS_SDRAM0_INITPLR7	0x8a080000
+#define CONFIG_SYS_SDRAM0_INITPLR8	0x8a080000
+#define CONFIG_SYS_SDRAM0_INITPLR9	0x8a080000
+#define CONFIG_SYS_SDRAM0_INITPLR10	0x8a080000
+#define CONFIG_SYS_SDRAM0_INITPLR11	0x80000432
+#define CONFIG_SYS_SDRAM0_INITPLR12	0x808103c0
+#define CONFIG_SYS_SDRAM0_INITPLR13	0x80810040
+#define CONFIG_SYS_SDRAM0_INITPLR14	0x00000000
+#define CONFIG_SYS_SDRAM0_INITPLR15	0x00000000
+#define CONFIG_SYS_SDRAM0_RQDC		0x80000038
+#define CONFIG_SYS_SDRAM0_RFDC		0x00000257
+#define CONFIG_SYS_SDRAM0_RDCC		0x40000000
+#define CONFIG_SYS_SDRAM0_DLCR		0x03000091
+#define CONFIG_SYS_SDRAM0_CLKTR		0x40000000
+#define CONFIG_SYS_SDRAM0_WRDTR		0x82000823
+#define CONFIG_SYS_SDRAM0_SDTR1		0x80201000
+#define CONFIG_SYS_SDRAM0_SDTR2		0x42204243
+#define CONFIG_SYS_SDRAM0_SDTR3		0x090c0d1a
+#define CONFIG_SYS_SDRAM0_MMODE		0x00000432
+#define CONFIG_SYS_SDRAM0_MEMODE	0x00000004
+#endif	/* !defined(CONFIG_ARCHES) */
+#endif	/* !defined(CONFIG_NAND_U_BOOT) */
+
+#define CONFIG_SYS_MBYTES_SDRAM	512	/* 512MB			*/
 
 /*-----------------------------------------------------------------------
  * I2C
  *----------------------------------------------------------------------*/
-#define CFG_I2C_SPEED		400000	/* I2C speed			*/
+#define CONFIG_SYS_I2C_SPEED		400000	/* I2C speed			*/
 
-#define CFG_I2C_MULTI_EEPROMS
-#define CFG_I2C_EEPROM_ADDR		(0xa8>>1)
-#define CFG_I2C_EEPROM_ADDR_LEN		1
-#define CFG_EEPROM_PAGE_WRITE_ENABLE
-#define CFG_EEPROM_PAGE_WRITE_BITS	3
-#define CFG_EEPROM_PAGE_WRITE_DELAY_MS	10
+#define CONFIG_SYS_I2C_MULTI_EEPROMS
+#define CONFIG_SYS_I2C_EEPROM_ADDR		(0xa8>>1)
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN		1
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS	3
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	10
 
 /* I2C SYSMON (LM75, AD7414 is almost compatible)			*/
 #define CONFIG_DTT_LM75		1		/* ON Semi's LM75	*/
 #define CONFIG_DTT_AD7414	1		/* use AD7414		*/
 #define CONFIG_DTT_SENSORS	{0}		/* Sensor addresses	*/
-#define CFG_DTT_MAX_TEMP	70
-#define CFG_DTT_LOW_TEMP	-30
-#define CFG_DTT_HYSTERESIS	3
+#define CONFIG_SYS_DTT_MAX_TEMP	70
+#define CONFIG_SYS_DTT_LOW_TEMP	-30
+#define CONFIG_SYS_DTT_HYSTERESIS	3
+
+#if defined(CONFIG_ARCHES)
+#define CONFIG_SYS_I2C_DTT_ADDR	0x4a		/* AD7414 I2C address	*/
+#endif
 
+#if !defined(CONFIG_ARCHES)
 /* RTC configuration */
 #define CONFIG_RTC_M41T62	1
-#define CFG_I2C_RTC_ADDR	0x68
+#define CONFIG_SYS_I2C_RTC_ADDR	0x68
+#endif
 
 /*-----------------------------------------------------------------------
  * Ethernet
  *----------------------------------------------------------------------*/
 #define CONFIG_IBM_EMAC4_V4	1
-#define CONFIG_PHY_ADDR		0	/* PHY address, See schematics	*/
-#define CONFIG_PHY1_ADDR	1
+
 #define CONFIG_HAS_ETH0
 #define CONFIG_HAS_ETH1
+
+#if !defined(CONFIG_ARCHES)
+#define CONFIG_PHY_ADDR		0	/* PHY address, See schematics	*/
+#define CONFIG_PHY1_ADDR	1
 /* Only Glacier (460GT) has 4 EMAC interfaces */
 #ifdef CONFIG_460GT
 #define CONFIG_PHY2_ADDR	2
@@ -275,6 +366,30 @@
 #define CONFIG_HAS_ETH3
 #endif
 
+#else /* defined(CONFIG_ARCHES) */
+
+#define CONFIG_FIXED_PHY	0xFFFFFFFF
+#define CONFIG_PHY_ADDR		CONFIG_FIXED_PHY
+#define CONFIG_PHY1_ADDR	0
+#define CONFIG_PHY2_ADDR	1
+#define CONFIG_HAS_ETH2
+
+#define CONFIG_SYS_FIXED_PHY_PORT(devnum, speed, duplex) \
+		{devnum, speed, duplex}
+#define CONFIG_SYS_FIXED_PHY_PORTS \
+		CONFIG_SYS_FIXED_PHY_PORT(0, 1000, FULL)
+
+#define CONFIG_M88E1112_PHY
+
+/*
+ * For the GPCS_PHYx_ADDR PHY address, choose some PHY address not
+ * used by CONFIG_PHYx_ADDR
+ */
+#define CONFIG_GPCS_PHY_ADDR    0xA
+#define CONFIG_GPCS_PHY1_ADDR   0xB
+#define CONFIG_GPCS_PHY2_ADDR   0xC
+#endif	/* !defined(CONFIG_ARCHES) */
+
 #define CONFIG_PHY_RESET	1	/* reset phy upon startup	*/
 #define CONFIG_PHY_GIGE		1	/* Include GbE speed/duplex detection */
 #define CONFIG_PHY_DYNAMIC_ANEG	1
@@ -286,18 +401,19 @@
 #ifdef CONFIG_460EX
 #define CONFIG_USB_OHCI_NEW
 #define CONFIG_USB_STORAGE
-#undef CFG_OHCI_BE_CONTROLLER		/* 460EX has little endian descriptors	*/
-#define CFG_OHCI_SWAP_REG_ACCESS	/* 460EX has little endian register	*/
-#define CFG_OHCI_USE_NPS		/* force NoPowerSwitching mode		*/
-#define CFG_USB_OHCI_REGS_BASE	(CFG_AHB_BASE | 0xd0000)
-#define CFG_USB_OHCI_SLOT_NAME	"ppc440"
-#define CFG_USB_OHCI_MAX_ROOT_PORTS 15
+#undef CONFIG_SYS_OHCI_BE_CONTROLLER		/* 460EX has little endian descriptors	*/
+#define CONFIG_SYS_OHCI_SWAP_REG_ACCESS	/* 460EX has little endian register	*/
+#define CONFIG_SYS_OHCI_USE_NPS		/* force NoPowerSwitching mode		*/
+#define CONFIG_SYS_USB_OHCI_REGS_BASE	(CONFIG_SYS_AHB_BASE | 0xd0000)
+#define CONFIG_SYS_USB_OHCI_SLOT_NAME	"ppc440"
+#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 15
 #endif
 
 /*
  * Default environment variables
  */
-#define	CONFIG_EXTRA_ENV_SETTINGS					\
+#if !defined(CONFIG_ARCHES)
+#define CONFIG_EXTRA_ENV_SETTINGS					\
 	CONFIG_AMCC_DEF_ENV						\
 	CONFIG_AMCC_DEF_ENV_POWERPC					\
 	CONFIG_AMCC_DEF_ENV_NOR_UPD					\
@@ -308,20 +424,46 @@
 	"pciconfighost=1\0"						\
 	"pcie_mode=RP:RP\0"						\
 	""
+#else /* defined(CONFIG_ARCHES) */
+#define CONFIG_EXTRA_ENV_SETTINGS					\
+	CONFIG_AMCC_DEF_ENV						\
+	CONFIG_AMCC_DEF_ENV_POWERPC					\
+	CONFIG_AMCC_DEF_ENV_NOR_UPD					\
+	"kernel_addr=fe000000\0"					\
+	"fdt_addr=fe1e0000\0"						\
+	"ramdisk_addr=fe200000\0"					\
+	"pciconfighost=1\0"						\
+	"pcie_mode=RP:RP\0"						\
+	"ethprime=ppc_4xx_eth1\0"					\
+	""
+#endif	/* !defined(CONFIG_ARCHES) */
 
 /*
  * Commands additional to the ones defined in amcc-common.h
  */
+#if defined(CONFIG_ARCHES)
+#define CONFIG_CMD_DTT
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_SDRAM
+#elif defined(CONFIG_CANYONLANDS)
 #define CONFIG_CMD_DATE
 #define CONFIG_CMD_DTT
+#define CONFIG_CMD_EXT2
+#define CONFIG_CMD_FAT
 #define CONFIG_CMD_NAND
 #define CONFIG_CMD_PCI
 #define CONFIG_CMD_SDRAM
 #define CONFIG_CMD_SNTP
-#ifdef CONFIG_460EX
-#define CONFIG_CMD_EXT2
-#define CONFIG_CMD_FAT
 #define CONFIG_CMD_USB
+#elif defined(CONFIG_GLACIER)
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_DTT
+#define CONFIG_CMD_NAND
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_SDRAM
+#define CONFIG_CMD_SNTP
+#else
+#error "board type not defined"
 #endif
 
 /* Partitions */
@@ -339,11 +481,41 @@
 #define CONFIG_PCI_CONFIG_HOST_BRIDGE
 
 /* Board-specific PCI */
-#define CFG_PCI_TARGET_INIT		/* let board init pci target    */
-#undef	CFG_PCI_MASTER_INIT
+#define CONFIG_SYS_PCI_TARGET_INIT		/* let board init pci target    */
+#undef	CONFIG_SYS_PCI_MASTER_INIT
 
-#define CFG_PCI_SUBSYS_VENDORID 0x1014	/* IBM				*/
-#define CFG_PCI_SUBSYS_DEVICEID 0xcafe	/* Whatever			*/
+#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x1014	/* IBM				*/
+#define CONFIG_SYS_PCI_SUBSYS_DEVICEID 0xcafe	/* Whatever			*/
+
+#ifdef CONFIG_460GT
+#if defined(CONFIG_ARCHES)
+/*-----------------------------------------------------------------------
+ * RapidIO I/O and Registers
+ *----------------------------------------------------------------------*/
+#define CONFIG_RAPIDIO
+#define CONFIG_SYS_460GT_SRIO_ERRATA_1
+
+#define SRGPL0_REG_BAR		0x0000000DAA000000ull	/*  16MB */
+#define SRGPL0_CFG_BAR		0x0000000DAB000000ull	/*  16MB */
+#define SRGPL0_MNT_BAR		0x0000000DAC000000ull	/*  16MB */
+#define SRGPL0_MSG_BAR		0x0000000DAD000000ull	/*  16MB */
+#define SRGPL0_OUT_BAR		0x0000000DB0000000ull	/* 256MB */
+
+#define CONFIG_SYS_SRGPL0_REG_BAR	0xAA000000		/*  16MB */
+#define CONFIG_SYS_SRGPL0_CFG_BAR	0xAB000000		/*  16MB */
+#define CONFIG_SYS_SRGPL0_MNT_BAR	0xAC000000		/*  16MB */
+#define CONFIG_SYS_SRGPL0_MSG_BAR	0xAD000000		/*  16MB */
+
+#define CONFIG_SYS_I2ODMA_BASE		0xCF000000
+#define CONFIG_SYS_I2ODMA_PHYS_ADDR	0x0000000400100000ull
+
+#define CONFIG_PPC4XX_RAPIDIO_PROMISCUOUS_MODE
+#undef CONFIG_PPC4XX_RAPIDIO_DEBUG
+#undef CONFIG_PPC4XX_RAPIDIO_IN_BAR_USE_OCM
+#define CONFIG_PPC4XX_RAPIDIO_USE_HB_PLB
+#undef CONFIG_PPC4XX_RAPIDIO_LOOPBACK
+#endif /* CONFIG_ARCHES */
+#endif /* CONFIG_460GT */
 
 /*-----------------------------------------------------------------------
  * External Bus Controller (EBC) Setup
@@ -357,38 +529,63 @@
  * EBC address which accepts bigger regions:
  *
  * 0xfc00.0000 -> 4.cc00.0000
+ *
+ * Arches has 32MBytes of NOR FLASH (Spansion 29GL256), it will be
+ * remapped to:
+ *
+ * 0xfe00.0000 -> 4.ce00.0000
  */
 
 #if defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_NAND_SPL)
 /* Memory Bank 3 (NOR-FLASH) initialization					*/
-#define CFG_EBC_PB3AP		0x10055e00
-#define CFG_EBC_PB3CR		(CFG_BOOT_BASE_ADDR | 0x9a000)
+#define CONFIG_SYS_EBC_PB3AP		0x10055e00
+#define CONFIG_SYS_EBC_PB3CR		(CONFIG_SYS_BOOT_BASE_ADDR | 0x9a000)
 
 /* Memory Bank 0 (NAND-FLASH) initialization						*/
-#define CFG_EBC_PB0AP		0x018003c0
-#define CFG_EBC_PB0CR		(CFG_NAND_ADDR | 0x1E000) /* BAS=NAND,BS=1MB,BU=R/W,BW=32bit*/
+#define CONFIG_SYS_EBC_PB0AP		0x018003c0
+#define CONFIG_SYS_EBC_PB0CR		(CONFIG_SYS_NAND_ADDR | 0x1E000) /* BAS=NAND,BS=1MB,BU=R/W,BW=32bit*/
 #else
 /* Memory Bank 0 (NOR-FLASH) initialization					*/
-#define CFG_EBC_PB0AP		0x10055e00
-#define CFG_EBC_PB0CR		(CFG_BOOT_BASE_ADDR | 0x9a000)
+#define CONFIG_SYS_EBC_PB0AP		0x10055e00
+#define CONFIG_SYS_EBC_PB0CR		(CONFIG_SYS_BOOT_BASE_ADDR | 0x9a000)
 
+#if !defined(CONFIG_ARCHES)
 /* Memory Bank 3 (NAND-FLASH) initialization						*/
-#define CFG_EBC_PB3AP		0x018003c0
-#define CFG_EBC_PB3CR		(CFG_NAND_ADDR | 0x1E000) /* BAS=NAND,BS=1MB,BU=R/W,BW=32bit*/
+#define CONFIG_SYS_EBC_PB3AP		0x018003c0
+#define CONFIG_SYS_EBC_PB3CR		(CONFIG_SYS_NAND_ADDR | 0x1E000) /* BAS=NAND,BS=1MB,BU=R/W,BW=32bit*/
 #endif
+#endif	/*defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_NAND_SPL) */
 
+#if !defined(CONFIG_ARCHES)
 /* Memory Bank 2 (CPLD) initialization						*/
-#define CFG_EBC_PB2AP		0x00804240
-#define CFG_EBC_PB2CR		(CFG_BCSR_BASE | 0x18000) /* BAS=CPLD,BS=1M,BU=RW,BW=32bit */
+#define CONFIG_SYS_EBC_PB2AP		0x00804240
+#define CONFIG_SYS_EBC_PB2CR		(CONFIG_SYS_BCSR_BASE | 0x18000) /* BAS=CPLD,BS=1M,BU=RW,BW=32bit */
 
-#define CFG_EBC_CFG		0xB8400000		/*  EBC0_CFG */
+#else /* defined(CONFIG_ARCHES) */
+
+/* Memory Bank 1 (FPGA) initialization  */
+#define CONFIG_SYS_EBC_PB1AP		0x7f8ffe80
+#define CONFIG_SYS_EBC_PB1CR		(CONFIG_SYS_FPGA_BASE | 0x3a000) /* BAS=FPGA,BS=2MB,BU=R/W,BW=16bit*/
+#endif	/* !defined(CONFIG_ARCHES) */
+
+#define CONFIG_SYS_EBC_CFG		0xB8400000		/*  EBC0_CFG */
+
+/*
+ * Arches doesn't use PerCS3 but GPIO43, so let's configure the GPIO
+ * pin multiplexing correctly
+ */
+#if defined(CONFIG_ARCHES)
+#define GPIO43_USE		GPIO_SEL	/* On Arches this pin is used as GPIO */
+#else
+#define GPIO43_USE		GPIO_ALT1	/* On Glacier this pin is used as ALT1 -> PerCS3 */
+#endif
 
 /*
  * PPC4xx GPIO Configuration
  */
 #ifdef CONFIG_460EX
 /* 460EX: Use USB configuration */
-#define CFG_4xx_GPIO_TABLE { /*	  Out		  GPIO	Alternate1	Alternate2	Alternate3 */ \
+#define CONFIG_SYS_4xx_GPIO_TABLE { /*	  Out		  GPIO	Alternate1	Alternate2	Alternate3 */ \
 {											\
 /* GPIO Core 0 */									\
 {GPIO0_BASE, GPIO_BI , GPIO_ALT1, GPIO_OUT_0}, /* GPIO0	GMC1TxD(0)	USB2HostD(0)	*/	\
@@ -462,7 +659,7 @@
 }
 #else
 /* 460GT: Use EMAC2+3 configuration */
-#define CFG_4xx_GPIO_TABLE { /*	  Out		  GPIO	Alternate1	Alternate2	Alternate3 */ \
+#define CONFIG_SYS_4xx_GPIO_TABLE { /*	  Out		  GPIO	Alternate1	Alternate2	Alternate3 */ \
 {											\
 /* GPIO Core 0 */									\
 {GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO0	GMC1TxD(0)	USB2HostD(0)	*/	\
@@ -511,7 +708,7 @@
 {GPIO1_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO40 IRQ(3)				*/	\
 {GPIO1_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO41 CS(1)				*/	\
 {GPIO1_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO42 CS(2)				*/	\
-{GPIO1_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO43 CS(3)		DMAReq1		IRQ(10)*/ \
+{GPIO1_BASE, GPIO_OUT, GPIO43_USE, GPIO_OUT_0},/* GPIO43 CS(3)		DMAReq1		IRQ(10)*/ \
 {GPIO1_BASE, GPIO_IN , GPIO_ALT3, GPIO_OUT_0}, /* GPIO44 CS(4)		DMAAck1		IRQ(11)*/ \
 {GPIO1_BASE, GPIO_IN , GPIO_ALT3, GPIO_OUT_0}, /* GPIO45 CS(5)		EOT/TC1		IRQ(12)*/ \
 {GPIO1_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO46 PerAddr(5)	DMAReq0		IRQ(13)*/ \
diff --git a/include/configs/cerf250.h b/include/configs/cerf250.h
index c801f037e..71e5b58dd 100644
--- a/include/configs/cerf250.h
+++ b/include/configs/cerf250.h
@@ -44,8 +44,8 @@
 /*
  * Size of malloc() pool
  */
-#define CFG_MALLOC_LEN	    (CFG_ENV_SIZE + 128*1024)
-#define CFG_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
+#define CONFIG_SYS_MALLOC_LEN	    (CONFIG_ENV_SIZE + 128*1024)
+#define CONFIG_SYS_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
 
 /*
  * Hardware drivers
@@ -94,33 +94,33 @@
 /*
  * Miscellaneous configurable options
  */
-#define CFG_HUSH_PARSER		1
-#define CFG_PROMPT_HUSH_PS2	"> "
+#define CONFIG_SYS_HUSH_PARSER		1
+#define CONFIG_SYS_PROMPT_HUSH_PS2	"> "
 
-#define CFG_LONGHELP					/* undef to save memory		*/
-#ifdef CFG_HUSH_PARSER
-#define CFG_PROMPT			"uboot$ "	/* Monitor Command Prompt */
+#define CONFIG_SYS_LONGHELP					/* undef to save memory		*/
+#ifdef CONFIG_SYS_HUSH_PARSER
+#define CONFIG_SYS_PROMPT			"uboot$ "	/* Monitor Command Prompt */
 #else
-#define CFG_PROMPT			"=> "		/* Monitor Command Prompt */
+#define CONFIG_SYS_PROMPT			"=> "		/* Monitor Command Prompt */
 #endif
-#define CFG_CBSIZE			256			/* Console I/O Buffer Size	*/
-#define CFG_PBSIZE			(CFG_CBSIZE+sizeof(CFG_PROMPT)+16)
+#define CONFIG_SYS_CBSIZE			256			/* Console I/O Buffer Size	*/
+#define CONFIG_SYS_PBSIZE			(CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
 										/* Print Buffer Size */
-#define CFG_MAXARGS			16			/* max number of command args	*/
-#define CFG_BARGSIZE		CFG_CBSIZE	/* Boot Argument Buffer Size	*/
-#define CFG_DEVICE_NULLDEV	1
+#define CONFIG_SYS_MAXARGS			16			/* max number of command args	*/
+#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
+#define CONFIG_SYS_DEVICE_NULLDEV	1
 
-#define CFG_MEMTEST_START	0xa0400000	/* memtest works on	*/
-#define CFG_MEMTEST_END		0xa0800000	/* 4 ... 8 MB in DRAM	*/
+#define CONFIG_SYS_MEMTEST_START	0xa0400000	/* memtest works on	*/
+#define CONFIG_SYS_MEMTEST_END		0xa0800000	/* 4 ... 8 MB in DRAM	*/
 
-#undef	CFG_CLKS_IN_HZ
+#undef	CONFIG_SYS_CLKS_IN_HZ
 
-#define CFG_LOAD_ADDR		0xa2000000	/* default load address */
+#define CONFIG_SYS_LOAD_ADDR		0xa2000000	/* default load address */
 
-#define CFG_HZ				3686400		/* incrementer freq: 3.6864 MHz */
-#define CFG_CPUSPEED		0x141		/* set core clock to 400/200/100 MHz */
+#define CONFIG_SYS_HZ				3686400		/* incrementer freq: 3.6864 MHz */
+#define CONFIG_SYS_CPUSPEED		0x141		/* set core clock to 400/200/100 MHz */
 
-#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
 
 
 /*
@@ -153,54 +153,54 @@
 #define PHYS_FLASH_BANK_SIZE		0x02000000	/* 32 MB Banks */
 #define PHYS_FLASH_SECT_SIZE		0x00040000	/* 256 KB sectors (x2) */
 
-#define CFG_DRAM_BASE			0xa0000000
-#define CFG_DRAM_SIZE			0x04000000
+#define CONFIG_SYS_DRAM_BASE			0xa0000000
+#define CONFIG_SYS_DRAM_SIZE			0x04000000
 
-#define CFG_FLASH_BASE			PHYS_FLASH_1
+#define CONFIG_SYS_FLASH_BASE			PHYS_FLASH_1
 
 /*
  * GPIO settings
  */
 
 
-#define CFG_GPSR0_VAL		0x00408030
-#define CFG_GPSR1_VAL		0x00BFA882
-#define CFG_GPSR2_VAL		0x0001C000
-#define CFG_GPCR0_VAL		0xC0031100
-#define CFG_GPCR1_VAL		0xFC400300
-#define CFG_GPCR2_VAL		0x00003FFF
-#define CFG_GPDR0_VAL		0xC0439330
-#define CFG_GPDR1_VAL		0xFCFFAB82
-#define CFG_GPDR2_VAL		0x0001FFFF
-#define CFG_GAFR0_L_VAL		0x80000000
-#define CFG_GAFR0_U_VAL		0xA5000010
-#define CFG_GAFR1_L_VAL		0x60008018
-#define CFG_GAFR1_U_VAL		0xAAA5AAAA
-#define CFG_GAFR2_L_VAL		0xAAA0000A
-#define CFG_GAFR2_U_VAL		0x00000002
-
-#define CFG_PSSR_VAL		0x20
+#define CONFIG_SYS_GPSR0_VAL		0x00408030
+#define CONFIG_SYS_GPSR1_VAL		0x00BFA882
+#define CONFIG_SYS_GPSR2_VAL		0x0001C000
+#define CONFIG_SYS_GPCR0_VAL		0xC0031100
+#define CONFIG_SYS_GPCR1_VAL		0xFC400300
+#define CONFIG_SYS_GPCR2_VAL		0x00003FFF
+#define CONFIG_SYS_GPDR0_VAL		0xC0439330
+#define CONFIG_SYS_GPDR1_VAL		0xFCFFAB82
+#define CONFIG_SYS_GPDR2_VAL		0x0001FFFF
+#define CONFIG_SYS_GAFR0_L_VAL		0x80000000
+#define CONFIG_SYS_GAFR0_U_VAL		0xA5000010
+#define CONFIG_SYS_GAFR1_L_VAL		0x60008018
+#define CONFIG_SYS_GAFR1_U_VAL		0xAAA5AAAA
+#define CONFIG_SYS_GAFR2_L_VAL		0xAAA0000A
+#define CONFIG_SYS_GAFR2_U_VAL		0x00000002
+
+#define CONFIG_SYS_PSSR_VAL		0x20
 
 /*
  * Memory settings
  */
-#define CFG_MSC0_VAL		0x12447FF0
-#define CFG_MSC1_VAL		0x12BC5554
-#define CFG_MSC2_VAL		0x7FF97FF1
-#define CFG_MDCNFG_VAL		0x00001AC9
-#define CFG_MDREFR_VAL		0x03CDC017
-#define CFG_MDMRS_VAL		0x00000000
+#define CONFIG_SYS_MSC0_VAL		0x12447FF0
+#define CONFIG_SYS_MSC1_VAL		0x12BC5554
+#define CONFIG_SYS_MSC2_VAL		0x7FF97FF1
+#define CONFIG_SYS_MDCNFG_VAL		0x00001AC9
+#define CONFIG_SYS_MDREFR_VAL		0x03CDC017
+#define CONFIG_SYS_MDMRS_VAL		0x00000000
 
 /*
  * PCMCIA and CF Interfaces
  */
-#define CFG_MECR_VAL		0x00000000
-#define CFG_MCMEM0_VAL		0x00010504
-#define CFG_MCMEM1_VAL		0x00010504
-#define CFG_MCATT0_VAL		0x00010504
-#define CFG_MCATT1_VAL		0x00010504
-#define CFG_MCIO0_VAL		0x00004715
-#define CFG_MCIO1_VAL		0x00004715
+#define CONFIG_SYS_MECR_VAL		0x00000000
+#define CONFIG_SYS_MCMEM0_VAL		0x00010504
+#define CONFIG_SYS_MCMEM1_VAL		0x00010504
+#define CONFIG_SYS_MCATT0_VAL		0x00010504
+#define CONFIG_SYS_MCATT1_VAL		0x00010504
+#define CONFIG_SYS_MCIO0_VAL		0x00004715
+#define CONFIG_SYS_MCIO1_VAL		0x00004715
 
 #define _LED			0x08000010	/*check this */
 #define LED_BLANK		0x08000040
@@ -209,17 +209,17 @@
 /*
  * FLASH and environment organization
  */
-#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
-#define CFG_MAX_FLASH_SECT	128	/* max number of sectors on one chip    */
+#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
+#define CONFIG_SYS_MAX_FLASH_SECT	128	/* max number of sectors on one chip    */
 
 /* timeout values are in ticks */
-#define CFG_FLASH_ERASE_TOUT	(25*CFG_HZ) /* Timeout for Flash Erase */
-#define CFG_FLASH_WRITE_TOUT	(25*CFG_HZ) /* Timeout for Flash Write */
+#define CONFIG_SYS_FLASH_ERASE_TOUT	(25*CONFIG_SYS_HZ) /* Timeout for Flash Erase */
+#define CONFIG_SYS_FLASH_WRITE_TOUT	(25*CONFIG_SYS_HZ) /* Timeout for Flash Write */
 
-#define CFG_MONITOR_LEN		0x40000		/* 256 KiB */
-#define CFG_ENV_IS_IN_FLASH	1
-#define CFG_ENV_ADDR		(PHYS_FLASH_1 + CFG_MONITOR_LEN)
-#define CFG_ENV_SIZE		0x40000	/* Total Size of Environment Sector	*/
+#define CONFIG_SYS_MONITOR_LEN		0x40000		/* 256 KiB */
+#define CONFIG_ENV_IS_IN_FLASH	1
+#define CONFIG_ENV_ADDR		(PHYS_FLASH_1 + CONFIG_SYS_MONITOR_LEN)
+#define CONFIG_ENV_SIZE		0x40000	/* Total Size of Environment Sector	*/
 
 
 #endif	/* __CONFIG_H */
diff --git a/include/configs/cm4008.h b/include/configs/cm4008.h
index ae40b358e..cfe6de79f 100644
--- a/include/configs/cm4008.h
+++ b/include/configs/cm4008.h
@@ -42,8 +42,8 @@
 /*
  * Size of malloc() pool
  */
-#define CFG_MALLOC_LEN		(CFG_ENV_SIZE + 128*1024)
-#define CFG_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
+#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + 128*1024)
+#define CONFIG_SYS_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
 
 /*
  * Hardware drivers
@@ -52,11 +52,11 @@
 /*
  * select serial console configuration
  */
-#define CFG_ENV_IS_NOWHERE
+#define CONFIG_ENV_IS_NOWHERE
 #define	CONFIG_SERIAL1
 #define CONFIG_CONS_INDEX	1
 #define CONFIG_BAUDRATE		115200
-#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
 
 
 /*
@@ -83,21 +83,21 @@
 /*
  * Miscellaneous configurable options
  */
-#define CFG_LONGHELP				/* undef to save memory		*/
-#define CFG_PROMPT		"boot > "	/* Monitor Command Prompt	*/
-#define CFG_CBSIZE		256		/* Console I/O Buffer Size	*/
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define CFG_MAXARGS		16		/* max number of command args	*/
-#define CFG_BARGSIZE		CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+#define CONFIG_SYS_LONGHELP				/* undef to save memory		*/
+#define CONFIG_SYS_PROMPT		"boot > "	/* Monitor Command Prompt	*/
+#define CONFIG_SYS_CBSIZE		256		/* Console I/O Buffer Size	*/
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS		16		/* max number of command args	*/
+#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
 
-#define CFG_MEMTEST_START	0x00800000	/* memtest works on	*/
-#define CFG_MEMTEST_END		0x01000000	/* 16 MB in DRAM	*/
+#define CONFIG_SYS_MEMTEST_START	0x00800000	/* memtest works on	*/
+#define CONFIG_SYS_MEMTEST_END		0x01000000	/* 16 MB in DRAM	*/
 
-#undef	CFG_CLKS_IN_HZ		/* everything, incl board info, in Hz */
+#undef	CONFIG_SYS_CLKS_IN_HZ		/* everything, incl board info, in Hz */
 
-#define CFG_LOAD_ADDR		0x00008000	/* default load address */
+#define CONFIG_SYS_LOAD_ADDR		0x00008000	/* default load address */
 
-#define CFG_HZ			(1000)		/* 1ms resolution ticks */
+#define CONFIG_SYS_HZ			(1000)		/* 1ms resolution ticks */
 
 /*-----------------------------------------------------------------------
  * Stack sizes
@@ -119,18 +119,18 @@
 
 #define PHYS_FLASH_1		0x02000000 /* Flash Bank #1 */
 #define PHYS_FLASH_SECT_SIZE    0x00020000 /* 128 KB sectors (x1) */
-#define CFG_FLASH_BASE		PHYS_FLASH_1
+#define CONFIG_SYS_FLASH_BASE		PHYS_FLASH_1
 
 /*-----------------------------------------------------------------------
  * FLASH and environment organization
  */
-#define CFG_MAX_FLASH_BANKS	2	/* max number of flash banks */
-#define CFG_MAX_FLASH_SECT	(128)	/* max number of sectors on one chip */
+#define CONFIG_SYS_MAX_FLASH_BANKS	2	/* max number of flash banks */
+#define CONFIG_SYS_MAX_FLASH_SECT	(128)	/* max number of sectors on one chip */
 
 /* timeout values are in ticks */
-#define CFG_FLASH_ERASE_TOUT	(20*CFG_HZ) /* Timeout for Flash Erase */
-#define CFG_FLASH_WRITE_TOUT	(20*CFG_HZ) /* Timeout for Flash Write */
+#define CONFIG_SYS_FLASH_ERASE_TOUT	(20*CONFIG_SYS_HZ) /* Timeout for Flash Erase */
+#define CONFIG_SYS_FLASH_WRITE_TOUT	(20*CONFIG_SYS_HZ) /* Timeout for Flash Write */
 
-#define CFG_ENV_SIZE		0x20000     /* Total Size of Environment */
+#define CONFIG_ENV_SIZE		0x20000     /* Total Size of Environment */
 
 #endif	/* __CONFIG_H */
diff --git a/include/configs/cm41xx.h b/include/configs/cm41xx.h
index c1dd33d1d..5454c2e5b 100644
--- a/include/configs/cm41xx.h
+++ b/include/configs/cm41xx.h
@@ -42,8 +42,8 @@
 /*
  * Size of malloc() pool
  */
-#define CFG_MALLOC_LEN		(CFG_ENV_SIZE + 128*1024)
-#define CFG_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
+#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + 128*1024)
+#define CONFIG_SYS_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
 
 /*
  * Hardware drivers
@@ -52,11 +52,11 @@
 /*
  * select serial console configuration
  */
-#define CFG_ENV_IS_NOWHERE
+#define CONFIG_ENV_IS_NOWHERE
 #define	CONFIG_SERIAL1
 #define CONFIG_CONS_INDEX	1
 #define CONFIG_BAUDRATE		115200
-#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
 
 
 /*
@@ -83,21 +83,21 @@
 /*
  * Miscellaneous configurable options
  */
-#define CFG_LONGHELP				/* undef to save memory		*/
-#define CFG_PROMPT		"boot > "	/* Monitor Command Prompt	*/
-#define CFG_CBSIZE		256		/* Console I/O Buffer Size	*/
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define CFG_MAXARGS		16		/* max number of command args	*/
-#define CFG_BARGSIZE		CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+#define CONFIG_SYS_LONGHELP				/* undef to save memory		*/
+#define CONFIG_SYS_PROMPT		"boot > "	/* Monitor Command Prompt	*/
+#define CONFIG_SYS_CBSIZE		256		/* Console I/O Buffer Size	*/
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS		16		/* max number of command args	*/
+#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
 
-#define CFG_MEMTEST_START	0x00800000	/* memtest works on	*/
-#define CFG_MEMTEST_END		0x01000000	/* 16 MB in DRAM	*/
+#define CONFIG_SYS_MEMTEST_START	0x00800000	/* memtest works on	*/
+#define CONFIG_SYS_MEMTEST_END		0x01000000	/* 16 MB in DRAM	*/
 
-#undef	CFG_CLKS_IN_HZ		/* everything, incl board info, in Hz */
+#undef	CONFIG_SYS_CLKS_IN_HZ		/* everything, incl board info, in Hz */
 
-#define CFG_LOAD_ADDR		0x00008000	/* default load address */
+#define CONFIG_SYS_LOAD_ADDR		0x00008000	/* default load address */
 
-#define CFG_HZ			(1000)		/* 1ms resolution ticks */
+#define CONFIG_SYS_HZ			(1000)		/* 1ms resolution ticks */
 
 /*-----------------------------------------------------------------------
  * Stack sizes
@@ -119,18 +119,18 @@
 
 #define PHYS_FLASH_1		0x02000000 /* Flash Bank #1 */
 #define PHYS_FLASH_SECT_SIZE    0x00020000 /* 128 KB sectors (x1) */
-#define CFG_FLASH_BASE		PHYS_FLASH_1
+#define CONFIG_SYS_FLASH_BASE		PHYS_FLASH_1
 
 /*-----------------------------------------------------------------------
  * FLASH and environment organization
  */
-#define CFG_MAX_FLASH_BANKS	2	/* max number of flash banks */
-#define CFG_MAX_FLASH_SECT	(128)	/* max number of sectors on one chip */
+#define CONFIG_SYS_MAX_FLASH_BANKS	2	/* max number of flash banks */
+#define CONFIG_SYS_MAX_FLASH_SECT	(128)	/* max number of sectors on one chip */
 
 /* timeout values are in ticks */
-#define CFG_FLASH_ERASE_TOUT	(20*CFG_HZ) /* Timeout for Flash Erase */
-#define CFG_FLASH_WRITE_TOUT	(20*CFG_HZ) /* Timeout for Flash Write */
+#define CONFIG_SYS_FLASH_ERASE_TOUT	(20*CONFIG_SYS_HZ) /* Timeout for Flash Erase */
+#define CONFIG_SYS_FLASH_WRITE_TOUT	(20*CONFIG_SYS_HZ) /* Timeout for Flash Write */
 
-#define CFG_ENV_SIZE		0x20000     /* Total Size of Environment */
+#define CONFIG_ENV_SIZE		0x20000     /* Total Size of Environment */
 
 #endif	/* __CONFIG_H */
diff --git a/include/configs/cm5200.h b/include/configs/cm5200.h
index 0221dfeb8..620ffea08 100644
--- a/include/configs/cm5200.h
+++ b/include/configs/cm5200.h
@@ -58,7 +58,7 @@
  */
 #define CONFIG_PSC_CONSOLE	1	/* console is on PSC1 */
 #define CONFIG_BAUDRATE		57600	/* ... at 57600 bps */
-#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
 #define CONFIG_SILENT_CONSOLE	1	/* needed to silence i2c_init() */
 
 /*
@@ -67,17 +67,17 @@
 #define CONFIG_MPC5xxx_FEC	1
 #define CONFIG_PHY_ADDR		0x00
 #define CONFIG_ENV_OVERWRITE	1	/* allow overwriting of ethaddr */
-/* use misc_init_r() to read ethaddr from I2C EEPROM (see CFG_I2C_EEPROM) */
+/* use misc_init_r() to read ethaddr from I2C EEPROM (see CONFIG_SYS_I2C_EEPROM) */
 #define CONFIG_MISC_INIT_R	1
 #define CONFIG_MAC_OFFSET	0x35	/* MAC address offset in I2C EEPROM */
 
 /*
  * POST support
  */
-#define CONFIG_POST		(CFG_POST_MEMORY | CFG_POST_CPU | CFG_POST_I2C)
+#define CONFIG_POST		(CONFIG_SYS_POST_MEMORY | CONFIG_SYS_POST_CPU | CONFIG_SYS_POST_I2C)
 #define MPC5XXX_SRAM_POST_SIZE	(MPC5XXX_SRAM_SIZE - 4)
 /* List of I2C addresses to be verified by POST */
-#define I2C_ADDR_LIST		{ CFG_I2C_SLAVE, CFG_I2C_IO, CFG_I2C_EEPROM }
+#define I2C_ADDR_LIST		{ CONFIG_SYS_I2C_SLAVE, CONFIG_SYS_I2C_IO, CONFIG_SYS_I2C_EEPROM }
 
 /* display image timestamps */
 #define CONFIG_TIMESTAMP	1
@@ -141,53 +141,53 @@
 /*
  * Clock configuration
  */
-#define CFG_MPC5XXX_CLKIN	33000000	/* SYS_XTAL_IN = 33MHz */
-#define CFG_IPBCLK_EQUALS_XLBCLK	1	/* IPB = 133MHz */
+#define CONFIG_SYS_MPC5XXX_CLKIN	33000000	/* SYS_XTAL_IN = 33MHz */
+#define CONFIG_SYS_IPBCLK_EQUALS_XLBCLK	1	/* IPB = 133MHz */
 
 /*
  * Memory map
  */
-#define CFG_MBAR		0xF0000000
-#define CFG_SDRAM_BASE		0x00000000
-#define CFG_DEFAULT_MBAR	0x80000000
+#define CONFIG_SYS_MBAR		0xF0000000
+#define CONFIG_SYS_SDRAM_BASE		0x00000000
+#define CONFIG_SYS_DEFAULT_MBAR	0x80000000
 
-#define CFG_LOWBOOT		1
+#define CONFIG_SYS_LOWBOOT		1
 
 /* Use ON-Chip SRAM until RAM will be available */
-#define CFG_INIT_RAM_ADDR	MPC5XXX_SRAM
+#define CONFIG_SYS_INIT_RAM_ADDR	MPC5XXX_SRAM
 #ifdef CONFIG_POST
 /* preserve space for the post_word at end of on-chip SRAM */
-#define CFG_INIT_RAM_END	MPC5XXX_SRAM_POST_SIZE
+#define CONFIG_SYS_INIT_RAM_END	MPC5XXX_SRAM_POST_SIZE
 #else
-#define CFG_INIT_RAM_END	MPC5XXX_SRAM_SIZE
+#define CONFIG_SYS_INIT_RAM_END	MPC5XXX_SRAM_SIZE
 #endif
 
-#define CFG_GBL_DATA_SIZE	128	/* size in bytes for initial data */
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define CONFIG_SYS_GBL_DATA_SIZE	128	/* size in bytes for initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
 #define CONFIG_BOARD_TYPES	1	/* we use board_type */
 
-#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
-#define CFG_MONITOR_BASE	TEXT_BASE
-#define CFG_MONITOR_LEN		(384 << 10)	/* 384 kB for Monitor */
-#define CFG_MALLOC_LEN		(256 << 10)	/* 256 kB for malloc() */
-#define CFG_BOOTMAPSZ		(8 << 20)	/* initial mem map for Linux */
+#define CONFIG_SYS_MONITOR_BASE	TEXT_BASE
+#define CONFIG_SYS_MONITOR_LEN		(384 << 10)	/* 384 kB for Monitor */
+#define CONFIG_SYS_MALLOC_LEN		(256 << 10)	/* 256 kB for malloc() */
+#define CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* initial mem map for Linux */
 
 /*
  * Flash configuration
  */
-#define CFG_FLASH_CFI		1
+#define CONFIG_SYS_FLASH_CFI		1
 #define CONFIG_FLASH_CFI_DRIVER	1
-#define CFG_FLASH_BASE		0xfc000000
+#define CONFIG_SYS_FLASH_BASE		0xfc000000
 /* we need these despite using CFI */
-#define CFG_MAX_FLASH_BANKS	1	/* max num of flash banks */
-#define CFG_MAX_FLASH_SECT	256	/* max num of sectors on one chip */
-#define CFG_FLASH_SIZE		0x02000000 /* 32 MiB */
+#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max num of flash banks */
+#define CONFIG_SYS_MAX_FLASH_SECT	256	/* max num of sectors on one chip */
+#define CONFIG_SYS_FLASH_SIZE		0x02000000 /* 32 MiB */
 
 
-#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
-#define CFG_RAMBOOT		1
-#undef CFG_LOWBOOT
+#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
+#define CONFIG_SYS_RAMBOOT		1
+#undef CONFIG_SYS_LOWBOOT
 #endif
 
 
@@ -195,19 +195,19 @@
  * Chip selects configuration
  */
 /* Boot Chipselect */
-#define CFG_BOOTCS_START	CFG_FLASH_BASE
-#define CFG_BOOTCS_SIZE		CFG_FLASH_SIZE
-#define CFG_BOOTCS_CFG		0x00087D31	/* for pci_clk = 33 MHz */
+#define CONFIG_SYS_BOOTCS_START	CONFIG_SYS_FLASH_BASE
+#define CONFIG_SYS_BOOTCS_SIZE		CONFIG_SYS_FLASH_SIZE
+#define CONFIG_SYS_BOOTCS_CFG		0x00087D31	/* for pci_clk = 33 MHz */
 /* use board_early_init_r to enable flash write in CS_BOOT */
 #define CONFIG_BOARD_EARLY_INIT_R
 
 /* Flash memory addressing */
-#define CFG_CS0_START		CFG_FLASH_BASE
-#define CFG_CS0_SIZE		CFG_FLASH_SIZE
+#define CONFIG_SYS_CS0_START		CONFIG_SYS_FLASH_BASE
+#define CONFIG_SYS_CS0_SIZE		CONFIG_SYS_FLASH_SIZE
 
 /* No burst, dead cycle = 1 for CS0 (Flash) */
-#define CFG_CS_BURST		0x00000000
-#define CFG_CS_DEADCYCLE	0x00000001
+#define CONFIG_SYS_CS_BURST		0x00000000
+#define CONFIG_SYS_CS_DEADCYCLE	0x00000001
 
 /*
  * SDRAM configuration
@@ -233,11 +233,11 @@
  * I2C configuration
  */
 #define CONFIG_HARD_I2C		1	/* I2C with hardware support */
-#define CFG_I2C_MODULE		2	/* Select I2C module #2 */
-#define CFG_I2C_SPEED		40000	/* 40 kHz */
-#define CFG_I2C_SLAVE		0x0
-#define CFG_I2C_IO		0x38	/* PCA9554AD I2C I/O port address */
-#define CFG_I2C_EEPROM		0x53	/* I2C EEPROM device address */
+#define CONFIG_SYS_I2C_MODULE		2	/* Select I2C module #2 */
+#define CONFIG_SYS_I2C_SPEED		40000	/* 40 kHz */
+#define CONFIG_SYS_I2C_SLAVE		0x0
+#define CONFIG_SYS_I2C_IO		0x38	/* PCA9554AD I2C I/O port address */
+#define CONFIG_SYS_I2C_EEPROM		0x53	/* I2C EEPROM device address */
 
 /*
  * RTC configuration
@@ -264,13 +264,13 @@
 /*
  * Environment settings
  */
-#define CFG_ENV_IS_IN_FLASH	1
-#define CFG_ENV_SIZE		0x10000
-#define CFG_ENV_SECT_SIZE	0x20000
-#define CFG_ENV_ADDR		(CFG_FLASH_BASE + CFG_MONITOR_LEN)
+#define CONFIG_ENV_IS_IN_FLASH	1
+#define CONFIG_ENV_SIZE		0x10000
+#define CONFIG_ENV_SECT_SIZE	0x20000
+#define CONFIG_ENV_ADDR		(CONFIG_SYS_FLASH_BASE + CONFIG_SYS_MONITOR_LEN)
 /* Configuration of redundant environment */
-#define CFG_ENV_ADDR_REDUND	(CFG_ENV_ADDR + CFG_ENV_SECT_SIZE)
-#define CFG_ENV_SIZE_REDUND	(CFG_ENV_SIZE)
+#define CONFIG_ENV_ADDR_REDUND	(CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE)
+#define CONFIG_ENV_SIZE_REDUND	(CONFIG_ENV_SIZE)
 
 /*
  * Pin multiplexing configuration
@@ -287,44 +287,44 @@
  * PSC2: UART
  * PSC1: UART
  */
-#define CFG_GPS_PORT_CONFIG	0x10559C44
+#define CONFIG_SYS_GPS_PORT_CONFIG	0x10559C44
 
 /*
  * Miscellaneous configurable options
  */
-#define CFG_LONGHELP		1	/* undef to save memory */
-#define CFG_PROMPT		"=> "	/* Monitor Command Prompt */
-#define CFG_CBSIZE		1024	/* Console I/O Buffer Size */
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define CFG_MAXARGS		16	/* max number of command args */
-#define CFG_BARGSIZE		CFG_CBSIZE	/* Boot Argument Buffer Size */
+#define CONFIG_SYS_LONGHELP		1	/* undef to save memory */
+#define CONFIG_SYS_PROMPT		"=> "	/* Monitor Command Prompt */
+#define CONFIG_SYS_CBSIZE		1024	/* Console I/O Buffer Size */
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS		16	/* max number of command args */
+#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size */
 
-#define CFG_ALT_MEMTEST		1
-#define CFG_MEMTEST_START	0x00100000	/* memtest works on */
-#define CFG_MEMTEST_END		0x03f00000	/* 1 .. 63 MiB in SDRAM */
+#define CONFIG_SYS_ALT_MEMTEST		1
+#define CONFIG_SYS_MEMTEST_START	0x00100000	/* memtest works on */
+#define CONFIG_SYS_MEMTEST_END		0x03f00000	/* 1 .. 63 MiB in SDRAM */
 
 #define CONFIG_LOOPW		1
 
-#define CFG_LOAD_ADDR		0x100000	/* default load address */
-#define CFG_HZ			1000	/* decrementer freq: 1 ms ticks */
+#define CONFIG_SYS_LOAD_ADDR		0x100000	/* default load address */
+#define CONFIG_SYS_HZ			1000	/* decrementer freq: 1 ms ticks */
 
 /*
  * Various low-level settings
  */
-#define CFG_HID0_INIT		HID0_ICE | HID0_ICFI
-#define CFG_HID0_FINAL		HID0_ICE
+#define CONFIG_SYS_HID0_INIT		HID0_ICE | HID0_ICFI
+#define CONFIG_SYS_HID0_FINAL		HID0_ICE
 
 #define BOOTFLAG_COLD		0x01	/* Normal Power-On: Boot from FLASH */
 #define BOOTFLAG_WARM		0x02	/* Software reboot */
 
-#define CFG_XLB_PIPELINING	1	/* enable transaction pipeling */
+#define CONFIG_SYS_XLB_PIPELINING	1	/* enable transaction pipeling */
 
 /*
  * Cache Configuration
  */
-#define CFG_CACHELINE_SIZE	32	/* For MPC5xxx CPUs */
+#define CONFIG_SYS_CACHELINE_SIZE	32	/* For MPC5xxx CPUs */
 #ifdef CONFIG_CMD_KGDB
-#define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value */
+#define CONFIG_SYS_CACHELINE_SHIFT	5	/* log base 2 of the above value */
 #endif
 
 /*
diff --git a/include/configs/cmc_pu2.h b/include/configs/cmc_pu2.h
index bce5fcd82..cdd308d8b 100644
--- a/include/configs/cmc_pu2.h
+++ b/include/configs/cmc_pu2.h
@@ -42,7 +42,7 @@
 #define CONFIG_INITRD_TAG	1
 
 #ifndef CONFIG_SKIP_LOWLEVEL_INIT
-#define CFG_USE_MAIN_OSCILLATOR		1
+#define CONFIG_SYS_USE_MAIN_OSCILLATOR		1
 /* flash */
 #define MC_PUIA_VAL	0x00000000
 #define MC_PUP_VAL	0x00000000
@@ -71,13 +71,15 @@
 #define SDRC_MR_VAL2	0x00000003 /* Load Mode Register */
 #define SDRC_MR_VAL3	0x00000000 /* Normal Mode */
 #define SDRC_TR_VAL	0x000002E0 /* Write refresh rate */
+#else
+#define CONFIG_SKIP_RELOCATE_UBOOT
 #endif	/* CONFIG_SKIP_LOWLEVEL_INIT */
 
 /*
  * Size of malloc() pool
  */
-#define CFG_MALLOC_LEN	(CFG_ENV_SIZE + 128*1024)
-#define CFG_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
+#define CONFIG_SYS_MALLOC_LEN	(CONFIG_ENV_SIZE + 128*1024)
+#define CONFIG_SYS_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
 
 #define CONFIG_BAUDRATE		9600
 
@@ -97,18 +99,18 @@
 #define CONFIG_HARD_I2C
 
 #ifdef CONFIG_HARD_I2C
-#define CFG_I2C_SPEED		0	/* not used */
-#define CFG_I2C_SLAVE		0	/* not used */
+#define CONFIG_SYS_I2C_SPEED		0	/* not used */
+#define CONFIG_SYS_I2C_SLAVE		0	/* not used */
 #define CONFIG_RTC_RS5C372A		/* RICOH I2C RTC */
-#define CFG_I2C_RTC_ADDR	0x32
-#define CFG_I2C_EEPROM_ADDR	0x50
-#define CFG_I2C_EEPROM_ADDR_LEN 1
-#define CFG_I2C_EEPROM_ADDR_OVERFLOW
+#define CONFIG_SYS_I2C_RTC_ADDR	0x32
+#define CONFIG_SYS_I2C_EEPROM_ADDR	0x50
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
+#define CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW
 #else
 #define CONFIG_TIMESTAMP
 #endif
 /* still about 20 kB free with this defined */
-#define CFG_LONGHELP
+#define CONFIG_SYS_LONGHELP
 
 #define CONFIG_BOOTDELAY      1
 
@@ -141,7 +143,7 @@
 #endif
 
 
-#define CFG_LONGHELP
+#define CONFIG_SYS_LONGHELP
 
 #define AT91_SMART_MEDIA_ALE	(1 << 22)	/* our ALE is AD22 */
 #define AT91_SMART_MEDIA_CLE	(1 << 21)	/* our CLE is AD21 */
@@ -150,44 +152,44 @@
 #define PHYS_SDRAM		0x20000000
 #define PHYS_SDRAM_SIZE		0x1000000	/* 16 megs */
 
-#define CFG_MEMTEST_START	PHYS_SDRAM
-#define CFG_MEMTEST_END		CFG_MEMTEST_START + PHYS_SDRAM_SIZE - 262144
+#define CONFIG_SYS_MEMTEST_START	PHYS_SDRAM
+#define CONFIG_SYS_MEMTEST_END		CONFIG_SYS_MEMTEST_START + PHYS_SDRAM_SIZE - 262144
 
 #define CONFIG_DRIVER_ETHER
 #define CONFIG_NET_RETRY_COUNT		20
 #define CONFIG_AT91C_USE_RMII
 
-#define CFG_SPI_WRITE_TOUT		(5*CFG_HZ)
-#define CFG_MAX_DATAFLASH_BANKS		2
-#define CFG_MAX_DATAFLASH_PAGES		16384
-#define CFG_DATAFLASH_LOGIC_ADDR_CS0	0xC0000000	/* Logical adress for CS0 */
-#define CFG_DATAFLASH_LOGIC_ADDR_CS3	0xD0000000	/* Logical adress for CS3 */
+#define CONFIG_SYS_SPI_WRITE_TOUT		(5*CONFIG_SYS_HZ)
+#define CONFIG_SYS_MAX_DATAFLASH_BANKS		2
+#define CONFIG_SYS_MAX_DATAFLASH_PAGES		16384
+#define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0	0xC0000000	/* Logical adress for CS0 */
+#define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS3	0xD0000000	/* Logical adress for CS3 */
 
 #define PHYS_FLASH_1			0x10000000
 #define PHYS_FLASH_SIZE			0x800000  /* 8 megs main flash */
-#define CFG_FLASH_BASE			PHYS_FLASH_1
-#define CFG_MONITOR_BASE		CFG_FLASH_BASE
-#define CFG_MAX_FLASH_BANKS		1
-#define CFG_MAX_FLASH_SECT		256
-#define CFG_FLASH_ERASE_TOUT		(11 * CFG_HZ)	/* Timeout for Flash Erase */
-#define CFG_FLASH_WRITE_TOUT		( 2 * CFG_HZ)	/* Timeout for Flash Write */
+#define CONFIG_SYS_FLASH_BASE			PHYS_FLASH_1
+#define CONFIG_SYS_MONITOR_BASE		CONFIG_SYS_FLASH_BASE
+#define CONFIG_SYS_MAX_FLASH_BANKS		1
+#define CONFIG_SYS_MAX_FLASH_SECT		256
+#define CONFIG_SYS_FLASH_ERASE_TOUT		(11 * CONFIG_SYS_HZ)	/* Timeout for Flash Erase */
+#define CONFIG_SYS_FLASH_WRITE_TOUT		( 2 * CONFIG_SYS_HZ)	/* Timeout for Flash Write */
 
-#define CFG_ENV_IS_IN_FLASH		1
-#define CFG_ENV_OFFSET			0x20000		/* after u-boot.bin */
-#define CFG_ENV_SECT_SIZE		(64 << 10)	/* sectors are 64 kB */
-#define CFG_ENV_SIZE			(16 << 10)	/* Use only 16 kB */
+#define CONFIG_ENV_IS_IN_FLASH		1
+#define CONFIG_ENV_OFFSET			0x20000		/* after u-boot.bin */
+#define CONFIG_ENV_SECT_SIZE		(64 << 10)	/* sectors are 64 kB */
+#define CONFIG_ENV_SIZE			(16 << 10)	/* Use only 16 kB */
 
-#define CFG_LOAD_ADDR		0x21000000  /* default load address */
+#define CONFIG_SYS_LOAD_ADDR		0x21000000  /* default load address */
 
-#define CFG_BAUDRATE_TABLE	{ 115200, 57600, 38400, 19200, 9600 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 115200, 57600, 38400, 19200, 9600 }
 
-#define CFG_PROMPT		"=> "		/* Monitor Command Prompt */
-#define CFG_CBSIZE		256		/* Console I/O Buffer Size */
-#define CFG_MAXARGS		32		/* max number of command args */
-#define CFG_PBSIZE		(CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define CONFIG_SYS_PROMPT		"=> "		/* Monitor Command Prompt */
+#define CONFIG_SYS_CBSIZE		256		/* Console I/O Buffer Size */
+#define CONFIG_SYS_MAXARGS		32		/* max number of command args */
+#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
 
-#define CFG_HZ 1000
-#define CFG_HZ_CLOCK (AT91C_MASTER_CLOCK/2)	/* AT91C_TC0_CMR is implicitly set to */
+#define CONFIG_SYS_HZ 1000
+#define CONFIG_SYS_HZ_CLOCK (AT91C_MASTER_CLOCK/2)	/* AT91C_TC0_CMR is implicitly set to */
 						/* AT91C_TC_TIMER_DIV1_CLOCK */
 
 #define CONFIG_STACKSIZE	(32*1024)	/* regular stack */
diff --git a/include/configs/cmi_mpc5xx.h b/include/configs/cmi_mpc5xx.h
index ac2b7a1e7..fa70a09f6 100644
--- a/include/configs/cmi_mpc5xx.h
+++ b/include/configs/cmi_mpc5xx.h
@@ -93,25 +93,25 @@
  * Miscellaneous configurable options
  */
 
-#define	CFG_LONGHELP				/* undef to save memory		*/
-#define	CFG_PROMPT		"=> "		/* Monitor Command Prompt	*/
+#define	CONFIG_SYS_LONGHELP				/* undef to save memory		*/
+#define	CONFIG_SYS_PROMPT		"=> "		/* Monitor Command Prompt	*/
 #if defined(CONFIG_CMD_KGDB)
-#define	CFG_CBSIZE		1024		/* Console I/O Buffer Size	*/
+#define	CONFIG_SYS_CBSIZE		1024		/* Console I/O Buffer Size	*/
 #else
-#define	CFG_CBSIZE		256		/* Console I/O Buffer Size	*/
+#define	CONFIG_SYS_CBSIZE		256		/* Console I/O Buffer Size	*/
 #endif
-#define	CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define	CFG_MAXARGS		16	       /* max number of command args	*/
-#define CFG_BARGSIZE		CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+#define	CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define	CONFIG_SYS_MAXARGS		16	       /* max number of command args	*/
+#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
 
-#define CFG_MEMTEST_START	0x00000000	/* memtest works on		*/
-#define CFG_MEMTEST_END		0x000fa000	/* 1 MB in SRAM			*/
+#define CONFIG_SYS_MEMTEST_START	0x00000000	/* memtest works on		*/
+#define CONFIG_SYS_MEMTEST_END		0x000fa000	/* 1 MB in SRAM			*/
 
-#define	CFG_LOAD_ADDR		0x100000	/* default load address		*/
+#define	CONFIG_SYS_LOAD_ADDR		0x100000	/* default load address		*/
 
-#define	CFG_HZ			1000		/* Decrementer freq: 1 ms ticks	*/
+#define	CONFIG_SYS_HZ			1000		/* Decrementer freq: 1 ms ticks	*/
 
-#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 1250000 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 1250000 }
 
 
 /*
@@ -121,39 +121,39 @@
 /*
  * Internal Memory Mapped (This is not the IMMR content)
  */
-#define CFG_IMMR		0x01000000		/* Physical start adress of internal memory map */
+#define CONFIG_SYS_IMMR		0x01000000		/* Physical start adress of internal memory map */
 
 /*
  * Definitions for initial stack pointer and data area
  */
-#define CFG_INIT_RAM_ADDR	(CFG_IMMR + 0x003f9800)	/* Physical start adress of internal MPC555 writable RAM */
-#define	CFG_INIT_RAM_END	(CFG_IMMR + 0x003fffff)	/* Physical end adress of internal MPC555 used RAM area	*/
-#define	CFG_GBL_DATA_SIZE	64			/* Size in bytes reserved for initial global data */
-#define CFG_GBL_DATA_OFFSET	((CFG_INIT_RAM_END - CFG_INIT_RAM_ADDR) - CFG_GBL_DATA_SIZE) /* Offset from the beginning of ram */
-#define	CFG_INIT_SP_ADDR	0x013fa000		/* Physical start adress of inital stack */
+#define CONFIG_SYS_INIT_RAM_ADDR	(CONFIG_SYS_IMMR + 0x003f9800)	/* Physical start adress of internal MPC555 writable RAM */
+#define	CONFIG_SYS_INIT_RAM_END	(CONFIG_SYS_IMMR + 0x003fffff)	/* Physical end adress of internal MPC555 used RAM area	*/
+#define	CONFIG_SYS_GBL_DATA_SIZE	64			/* Size in bytes reserved for initial global data */
+#define CONFIG_SYS_GBL_DATA_OFFSET	((CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_INIT_RAM_ADDR) - CONFIG_SYS_GBL_DATA_SIZE) /* Offset from the beginning of ram */
+#define	CONFIG_SYS_INIT_SP_ADDR	0x013fa000		/* Physical start adress of inital stack */
 
 /*
  * Start addresses for the final memory configuration
- * Please note that CFG_SDRAM_BASE _must_ start at 0
+ * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
  */
-#define	CFG_SDRAM_BASE		0x00000000	/* Monitor won't change memory map			*/
-#define CFG_FLASH_BASE		0x02000000	/* External flash */
+#define	CONFIG_SYS_SDRAM_BASE		0x00000000	/* Monitor won't change memory map			*/
+#define CONFIG_SYS_FLASH_BASE		0x02000000	/* External flash */
 #define PLD_BASE		0x03000000	/* PLD  */
 #define ANYBUS_BASE		0x03010000	/* Anybus Module */
 
-#define CFG_RESET_ADRESS	0x01000000	/* Adress which causes reset */
-#define	CFG_MONITOR_BASE	CFG_FLASH_BASE	/* TEXT_BASE is defined in the board config.mk file.	*/
+#define CONFIG_SYS_RESET_ADRESS	0x01000000	/* Adress which causes reset */
+#define	CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_FLASH_BASE	/* TEXT_BASE is defined in the board config.mk file.	*/
 						/* This adress is given to the linker with -Ttext to	*/
 						/* locate the text section at this adress.		*/
-#define	CFG_MONITOR_LEN		(192 << 10)	/* Reserve 192 kB for Monitor				*/
-#define	CFG_MALLOC_LEN		(64 << 10)	/* Reserve 128 kB for malloc()				*/
+#define	CONFIG_SYS_MONITOR_LEN		(192 << 10)	/* Reserve 192 kB for Monitor				*/
+#define	CONFIG_SYS_MALLOC_LEN		(64 << 10)	/* Reserve 128 kB for malloc()				*/
 
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define	CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux		*/
+#define	CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux		*/
 
 
 /*-----------------------------------------------------------------------
@@ -162,18 +162,18 @@
  *
  */
 
-#define CFG_MAX_FLASH_BANKS	1		/* Max number of memory banks		*/
-#define CFG_MAX_FLASH_SECT	64		/* Max number of sectors on one chip	*/
-#define CFG_FLASH_ERASE_TOUT	180000		/* Timeout for Flash Erase (in ms)	*/
-#define CFG_FLASH_WRITE_TOUT	600		/* Timeout for Flash Write (in ms)	*/
-#define CFG_FLASH_PROTECTION    1		/* Physically section protection on	*/
+#define CONFIG_SYS_MAX_FLASH_BANKS	1		/* Max number of memory banks		*/
+#define CONFIG_SYS_MAX_FLASH_SECT	64		/* Max number of sectors on one chip	*/
+#define CONFIG_SYS_FLASH_ERASE_TOUT	180000		/* Timeout for Flash Erase (in ms)	*/
+#define CONFIG_SYS_FLASH_WRITE_TOUT	600		/* Timeout for Flash Write (in ms)	*/
+#define CONFIG_SYS_FLASH_PROTECTION    1		/* Physically section protection on	*/
 
-#define	CFG_ENV_IS_IN_FLASH	1
+#define	CONFIG_ENV_IS_IN_FLASH	1
 
-#ifdef	CFG_ENV_IS_IN_FLASH
-#define CFG_ENV_OFFSET		0x00020000	/* Environment starts at this adress	*/
-#define	CFG_ENV_SIZE		0x00010000	/* Set whole sector as env		*/
-#define	CFG_USE_PPCENV				/* Environment embedded in sect .ppcenv */
+#ifdef	CONFIG_ENV_IS_IN_FLASH
+#define CONFIG_ENV_OFFSET		0x00020000	/* Environment starts at this adress	*/
+#define	CONFIG_ENV_SIZE		0x00010000	/* Set whole sector as env		*/
+#define	CONFIG_SYS_USE_PPCENV				/* Environment embedded in sect .ppcenv */
 #endif
 
 /*-----------------------------------------------------------------------
@@ -183,10 +183,10 @@
  * SW Watchdog freeze
  */
 #if defined(CONFIG_WATCHDOG)
-#define CFG_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
+#define CONFIG_SYS_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
 			 SYPCR_SWE | SYPCR_SWRI| SYPCR_SWP)
 #else
-#define CFG_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
+#define CONFIG_SYS_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
 			 SYPCR_SWP)
 #endif	/* CONFIG_WATCHDOG */
 
@@ -195,14 +195,14 @@
  *-----------------------------------------------------------------------
  * Clear Reference Interrupt Status, Timebase freezing enabled
  */
-#define CFG_TBSCR	(TBSCR_REFA | TBSCR_REFB | TBSCR_TBF)
+#define CONFIG_SYS_TBSCR	(TBSCR_REFA | TBSCR_REFB | TBSCR_TBF)
 
 /*-----------------------------------------------------------------------
  * PISCR - Periodic Interrupt Status and Control
  *-----------------------------------------------------------------------
  * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
  */
-#define CFG_PISCR	(PISCR_PITF)
+#define CONFIG_SYS_PISCR	(PISCR_PITF)
 
 /*-----------------------------------------------------------------------
  * SCCR - System Clock and reset Control Register
@@ -211,7 +211,7 @@
  * power management and some other internal clocks
  */
 #define SCCR_MASK	SCCR_EBDF00
-#define CFG_SCCR	(SCCR_TBS     | SCCR_RTDIV    | SCCR_RTSEL    | \
+#define CONFIG_SYS_SCCR	(SCCR_TBS     | SCCR_RTDIV    | SCCR_RTSEL    | \
 			 SCCR_COM00   | SCCR_DFNL000 | SCCR_DFNH000)
 
 /*-----------------------------------------------------------------------
@@ -219,7 +219,7 @@
  *-----------------------------------------------------------------------
  * Data show cycle
  */
-#define CFG_SIUMCR	(SIUMCR_DBGC00)		/* Disable data show cycle	*/
+#define CONFIG_SYS_SIUMCR	(SIUMCR_DBGC00)		/* Disable data show cycle	*/
 
 /*-----------------------------------------------------------------------
  * PLPRCR - PLL, Low-Power, and Reset Control Register
@@ -227,8 +227,8 @@
  * Set all bits to 40 Mhz
  *
  */
-#define CFG_OSC_CLK	((uint)4000000)		/* Oscillator clock is 4MHz	*/
-#define CFG_PLPRCR	(PLPRCR_MF_9 | PLPRCR_DIVF_0)
+#define CONFIG_SYS_OSC_CLK	((uint)4000000)		/* Oscillator clock is 4MHz	*/
+#define CONFIG_SYS_PLPRCR	(PLPRCR_MF_9 | PLPRCR_DIVF_0)
 
 
 /*-----------------------------------------------------------------------
@@ -236,36 +236,36 @@
  *-----------------------------------------------------------------------
  *
  */
-#define CFG_UMCR	(UMCR_FSPEED)		/* IMB clock same as U-bus	*/
+#define CONFIG_SYS_UMCR	(UMCR_FSPEED)		/* IMB clock same as U-bus	*/
 
 /*-----------------------------------------------------------------------
  * ICTRL - I-Bus Support Control Register
  */
-#define CFG_ICTRL	(ICTRL_ISCT_SER_7)	/* Take out of serialized mode	*/
+#define CONFIG_SYS_ICTRL	(ICTRL_ISCT_SER_7)	/* Take out of serialized mode	*/
 
 /*-----------------------------------------------------------------------
  * USIU - Memory Controller Register
  *-----------------------------------------------------------------------
  */
 
-#define CFG_BR0_PRELIM		(CFG_FLASH_BASE | BR_V | BR_BI | BR_PS_16)
-#define CFG_OR0_PRELIM		(OR_ADDR_MK_FF | OR_SCY_3)
-#define CFG_BR1_PRELIM		(ANYBUS_BASE)
-#define CFG_OR1_PRELIM		(OR_ADDR_MK_FFFF | OR_SCY_1 | OR_ETHR)
-#define CFG_BR2_PRELIM		(CFG_SDRAM_BASE | BR_V | BR_PS_32)
-#define CFG_OR2_PRELIM		(OR_ADDR_MK_FF)
-#define CFG_BR3_PRELIM		(PLD_BASE | BR_V | BR_BI | BR_LBDIR | BR_PS_8)
-#define CFG_OR3_PRELIM		(OR_ADDR_MK_FF | OR_TRLX | OR_BSCY | OR_SCY_8 | \
+#define CONFIG_SYS_BR0_PRELIM		(CONFIG_SYS_FLASH_BASE | BR_V | BR_BI | BR_PS_16)
+#define CONFIG_SYS_OR0_PRELIM		(OR_ADDR_MK_FF | OR_SCY_3)
+#define CONFIG_SYS_BR1_PRELIM		(ANYBUS_BASE)
+#define CONFIG_SYS_OR1_PRELIM		(OR_ADDR_MK_FFFF | OR_SCY_1 | OR_ETHR)
+#define CONFIG_SYS_BR2_PRELIM		(CONFIG_SYS_SDRAM_BASE | BR_V | BR_PS_32)
+#define CONFIG_SYS_OR2_PRELIM		(OR_ADDR_MK_FF)
+#define CONFIG_SYS_BR3_PRELIM		(PLD_BASE | BR_V | BR_BI | BR_LBDIR | BR_PS_8)
+#define CONFIG_SYS_OR3_PRELIM		(OR_ADDR_MK_FF | OR_TRLX | OR_BSCY | OR_SCY_8 | \
 				 OR_ACS_10 | OR_ETHR | OR_CSNT)
 
-#define FLASH_BASE0_PRELIM	CFG_FLASH_BASE	/* We don't realign the flash	*/
+#define FLASH_BASE0_PRELIM	CONFIG_SYS_FLASH_BASE	/* We don't realign the flash	*/
 
 /*-----------------------------------------------------------------------
  * DER - Timer Decrementer
  *-----------------------------------------------------------------------
  * Initialise to zero
  */
-#define CFG_DER			0x00000000
+#define CONFIG_SYS_DER			0x00000000
 
 
 /*
diff --git a/include/configs/cobra5272.h b/include/configs/cobra5272.h
index 649b053c2..fb32f3f3c 100644
--- a/include/configs/cobra5272.h
+++ b/include/configs/cobra5272.h
@@ -53,13 +53,13 @@
 /* ---
  * Defines processor clock - important for correct timings concerning serial
  * interface etc.
- * CFG_HZ gives unit: 1000 -> 1 Hz ^= 1000 ms
+ * CONFIG_SYS_HZ gives unit: 1000 -> 1 Hz ^= 1000 ms
  * ---
  */
 
-#define CFG_HZ			1000
-#define CFG_CLK			66000000
-#define CFG_SDRAM_SIZE		16		/* SDRAM size in MB */
+#define CONFIG_SYS_HZ			1000
+#define CONFIG_SYS_CLK			66000000
+#define CONFIG_SYS_SDRAM_SIZE		16		/* SDRAM size in MB */
 
 /* ---
  * Enable use of Ethernet
@@ -73,15 +73,15 @@
 /* ---
  * Define baudrate for UART1 (console output, tftp, ...)
  * default value of CONFIG_BAUDRATE for Sentec board: 19200 baud
- * CFG_BAUDRATE_TABLE defines values that can be selected in u-boot command
+ * CONFIG_SYS_BAUDRATE_TABLE defines values that can be selected in u-boot command
  * interface
  * ---
  */
 
 #define CONFIG_MCFUART
-#define CFG_UART_PORT		(0)
+#define CONFIG_SYS_UART_PORT		(0)
 #define CONFIG_BAUDRATE		19200
-#define CFG_BAUDRATE_TABLE { 9600 , 19200 , 38400 , 57600, 115200 }
+#define CONFIG_SYS_BAUDRATE_TABLE { 9600 , 19200 , 38400 , 57600, 115200 }
 
 /* ---
  * set "#if 0" to "#if 1" if (Hardware)-WATCHDOG should be enabled & change
@@ -124,14 +124,14 @@
  */
 
 #ifndef CONFIG_MONITOR_IS_IN_RAM
-#define CFG_ENV_OFFSET		0x4000
-#define CFG_ENV_SECT_SIZE	0x2000
-#define CFG_ENV_IS_IN_FLASH	1
-#define CFG_ENV_IS_EMBEDDED	1
+#define CONFIG_ENV_OFFSET		0x4000
+#define CONFIG_ENV_SECT_SIZE	0x2000
+#define CONFIG_ENV_IS_IN_FLASH	1
+#define CONFIG_ENV_IS_EMBEDDED	1
 #else
-#define CFG_ENV_ADDR		0xffe04000
-#define CFG_ENV_SECT_SIZE	0x2000
-#define CFG_ENV_IS_IN_FLASH	1
+#define CONFIG_ENV_ADDR		0xffe04000
+#define CONFIG_ENV_SECT_SIZE	0x2000
+#define CONFIG_ENV_IS_IN_FLASH	1
 #endif
 
 
@@ -159,22 +159,22 @@
 #	define CONFIG_NET_MULTI		1
 #	define CONFIG_MII		1
 #	define CONFIG_MII_INIT		1
-#	define CFG_DISCOVER_PHY
-#	define CFG_RX_ETH_BUFFER	8
-#	define CFG_FAULT_ECHO_LINK_DOWN
+#	define CONFIG_SYS_DISCOVER_PHY
+#	define CONFIG_SYS_RX_ETH_BUFFER	8
+#	define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
 
-#	define CFG_FEC0_PINMUX		0
-#	define CFG_FEC0_MIIBASE		CFG_FEC0_IOBASE
+#	define CONFIG_SYS_FEC0_PINMUX		0
+#	define CONFIG_SYS_FEC0_MIIBASE		CONFIG_SYS_FEC0_IOBASE
 #	define MCFFEC_TOUT_LOOP		50000
-/* If CFG_DISCOVER_PHY is not defined - hardcoded */
-#	ifndef CFG_DISCOVER_PHY
+/* If CONFIG_SYS_DISCOVER_PHY is not defined - hardcoded */
+#	ifndef CONFIG_SYS_DISCOVER_PHY
 #		define FECDUPLEX	FULL
 #		define FECSPEED		_100BASET
 #	else
-#		ifndef CFG_FAULT_ECHO_LINK_DOWN
-#			define CFG_FAULT_ECHO_LINK_DOWN
+#		ifndef CONFIG_SYS_FAULT_ECHO_LINK_DOWN
+#			define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
 #		endif
-#	endif			/* CFG_DISCOVER_PHY */
+#	endif			/* CONFIG_SYS_DISCOVER_PHY */
 #endif
 
 /*
@@ -211,23 +211,23 @@ considered during boot */
 
 #endif
 
-#define CFG_PROMPT		"COBRA > "	/* Layout of u-boot prompt*/
+#define CONFIG_SYS_PROMPT		"COBRA > "	/* Layout of u-boot prompt*/
 
-#define CFG_LOAD_ADDR		0x20000		/*Defines default RAM address
+#define CONFIG_SYS_LOAD_ADDR		0x20000		/*Defines default RAM address
 from which user programs will be started */
 
 /*---*/
 
-#define CFG_LONGHELP				/* undef to save memory		*/
+#define CONFIG_SYS_LONGHELP				/* undef to save memory		*/
 
 #if defined(CONFIG_CMD_KGDB)
-#define CFG_CBSIZE		1024		/* Console I/O Buffer Size	*/
+#define CONFIG_SYS_CBSIZE		1024		/* Console I/O Buffer Size	*/
 #else
-#define CFG_CBSIZE		256		/* Console I/O Buffer Size	*/
+#define CONFIG_SYS_CBSIZE		256		/* Console I/O Buffer Size	*/
 #endif
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define CFG_MAXARGS		16		/* max number of command args	*/
-#define CFG_BARGSIZE		CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS		16		/* max number of command args	*/
+#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
 
 /*
  *-----------------------------------------------------------------------------
@@ -240,8 +240,8 @@ from which user programs will be started */
  * ---
  */
 
-#define CFG_MEMTEST_START	0x400
-#define CFG_MEMTEST_END		0x380000
+#define CONFIG_SYS_MEMTEST_START	0x400
+#define CONFIG_SYS_MEMTEST_END		0x380000
 
 /* ---
  * Low Level Configuration Settings
@@ -255,39 +255,39 @@ from which user programs will be started */
  * ---
  */
 
-#define CFG_MBAR		0x10000000	/* Register Base Addrs */
+#define CONFIG_SYS_MBAR		0x10000000	/* Register Base Addrs */
 
 /* ---
  * System Conf. Reg. & System Protection Reg.
  * ---
  */
 
-#define CFG_SCR			0x0003;
-#define CFG_SPR			0xffff;
+#define CONFIG_SYS_SCR			0x0003
+#define CONFIG_SYS_SPR			0xffff
 
 /* ---
  * Ethernet settings
  * ---
  */
 
-#define CFG_DISCOVER_PHY
-#define CFG_ENET_BD_BASE	0x780000
+#define CONFIG_SYS_DISCOVER_PHY
+#define CONFIG_SYS_ENET_BD_BASE	0x780000
 
 /*-----------------------------------------------------------------------
  * Definitions for initial stack pointer and data area (in internal SRAM)
  */
-#define CFG_INIT_RAM_ADDR	0x20000000
-#define CFG_INIT_RAM_END	0x1000	/* End of used area in internal SRAM	*/
-#define CFG_GBL_DATA_SIZE	64	/* size in bytes reserved for initial data */
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_INIT_RAM_ADDR	0x20000000
+#define CONFIG_SYS_INIT_RAM_END	0x1000	/* End of used area in internal SRAM	*/
+#define CONFIG_SYS_GBL_DATA_SIZE	64	/* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
 /*-----------------------------------------------------------------------
  * Start addresses for the final memory configuration
  * (Set up by the startup code)
- * Please note that CFG_SDRAM_BASE _must_ start at 0
+ * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
  */
-#define CFG_SDRAM_BASE		0x00000000
+#define CONFIG_SYS_SDRAM_BASE		0x00000000
 
 /*
  *-------------------------------------------------------------------------
@@ -295,42 +295,42 @@ from which user programs will be started */
  *-----------------------------------------------------------------------
  */
 
-/* #define CFG_SDRAM_SIZE		16 */
+/* #define CONFIG_SYS_SDRAM_SIZE		16 */
 
 /*
  *-----------------------------------------------------------------------
  */
 
-#define CFG_FLASH_BASE		0xffe00000
+#define CONFIG_SYS_FLASH_BASE		0xffe00000
 
 #ifdef	CONFIG_MONITOR_IS_IN_RAM
-#define CFG_MONITOR_BASE	0x20000
+#define CONFIG_SYS_MONITOR_BASE	0x20000
 #else
-#define CFG_MONITOR_BASE	(CFG_FLASH_BASE + 0x400)
+#define CONFIG_SYS_MONITOR_BASE	(CONFIG_SYS_FLASH_BASE + 0x400)
 #endif
 
-#define CFG_MONITOR_LEN		0x20000
-#define CFG_MALLOC_LEN		(256 << 10)
-#define CFG_BOOTPARAMS_LEN	64*1024
+#define CONFIG_SYS_MONITOR_LEN		0x20000
+#define CONFIG_SYS_MALLOC_LEN		(256 << 10)
+#define CONFIG_SYS_BOOTPARAMS_LEN	64*1024
 
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization ??
  */
-#define CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
+#define CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
 
 /*-----------------------------------------------------------------------
  * FLASH organization
  */
-#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
-#define CFG_MAX_FLASH_SECT	11	/* max number of sectors on one chip	*/
-#define CFG_FLASH_ERASE_TOUT	1000	/* flash timeout */
+#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
+#define CONFIG_SYS_MAX_FLASH_SECT	11	/* max number of sectors on one chip	*/
+#define CONFIG_SYS_FLASH_ERASE_TOUT	1000	/* flash timeout */
 
 /*-----------------------------------------------------------------------
  * Cache Configuration
  */
-#define CFG_CACHELINE_SIZE	16
+#define CONFIG_SYS_CACHELINE_SIZE	16
 
 /*-----------------------------------------------------------------------
  * Memory bank definitions
@@ -338,29 +338,29 @@ from which user programs will be started */
  * Please refer also to Motorola Coldfire user manual - Chapter XXX
  * <http://e-www.motorola.com/files/dsp/doc/ref_manual/MCF5272UM.pdf>
  */
-#define CFG_BR0_PRELIM		0xFFE00201
-#define CFG_OR0_PRELIM		0xFFE00014
+#define CONFIG_SYS_BR0_PRELIM		0xFFE00201
+#define CONFIG_SYS_OR0_PRELIM		0xFFE00014
 
-#define CFG_BR1_PRELIM		0
-#define CFG_OR1_PRELIM		0
+#define CONFIG_SYS_BR1_PRELIM		0
+#define CONFIG_SYS_OR1_PRELIM		0
 
-#define CFG_BR2_PRELIM		0
-#define CFG_OR2_PRELIM		0
+#define CONFIG_SYS_BR2_PRELIM		0
+#define CONFIG_SYS_OR2_PRELIM		0
 
-#define CFG_BR3_PRELIM		0
-#define CFG_OR3_PRELIM		0
+#define CONFIG_SYS_BR3_PRELIM		0
+#define CONFIG_SYS_OR3_PRELIM		0
 
-#define CFG_BR4_PRELIM		0
-#define CFG_OR4_PRELIM		0
+#define CONFIG_SYS_BR4_PRELIM		0
+#define CONFIG_SYS_OR4_PRELIM		0
 
-#define CFG_BR5_PRELIM		0
-#define CFG_OR5_PRELIM		0
+#define CONFIG_SYS_BR5_PRELIM		0
+#define CONFIG_SYS_OR5_PRELIM		0
 
-#define CFG_BR6_PRELIM		0
-#define CFG_OR6_PRELIM		0
+#define CONFIG_SYS_BR6_PRELIM		0
+#define CONFIG_SYS_OR6_PRELIM		0
 
-#define CFG_BR7_PRELIM		0x00000701
-#define CFG_OR7_PRELIM		0xFF00007C
+#define CONFIG_SYS_BR7_PRELIM		0x00000701
+#define CONFIG_SYS_OR7_PRELIM		0xFF00007C
 
 /*-----------------------------------------------------------------------
  * LED config
@@ -377,15 +377,15 @@ from which user programs will be started */
 /*-----------------------------------------------------------------------
  * Port configuration (GPIO)
  */
-#define CFG_PACNT		0x00000000		/* PortA control reg.: All pins are external
+#define CONFIG_SYS_PACNT		0x00000000		/* PortA control reg.: All pins are external
 GPIO*/
-#define CFG_PADDR		0x00FF			/* PortA direction reg.: PA7 to PA0 are outputs
+#define CONFIG_SYS_PADDR		0x00FF			/* PortA direction reg.: PA7 to PA0 are outputs
 (1^=output, 0^=input) */
-#define CFG_PADAT		LED_STAT_0		/* PortA value reg.: Turn all LED off */
-#define CFG_PBCNT		0x55554155		/* PortB control reg.: Ethernet/UART
+#define CONFIG_SYS_PADAT		LED_STAT_0		/* PortA value reg.: Turn all LED off */
+#define CONFIG_SYS_PBCNT		0x55554155		/* PortB control reg.: Ethernet/UART
 configuration */
-#define CFG_PBDDR		0x0000			/* PortB direction: All pins configured as inputs */
-#define CFG_PBDAT		0x0000			/* PortB value reg. */
-#define CFG_PDCNT		0x00000000		/* PortD control reg. */
+#define CONFIG_SYS_PBDDR		0x0000			/* PortB direction: All pins configured as inputs */
+#define CONFIG_SYS_PBDAT		0x0000			/* PortB value reg. */
+#define CONFIG_SYS_PDCNT		0x00000000		/* PortD control reg. */
 
 #endif	/* _CONFIG_COBRA5272_H */
diff --git a/include/configs/cogent_mpc8260.h b/include/configs/cogent_mpc8260.h
index 84d50c71d..c58023022 100644
--- a/include/configs/cogent_mpc8260.h
+++ b/include/configs/cogent_mpc8260.h
@@ -136,25 +136,25 @@
 /*
  * Miscellaneous configurable options
  */
-#define	CFG_LONGHELP			/* undef to save memory		*/
-#define	CFG_PROMPT	"=> "		/* Monitor Command Prompt	*/
+#define	CONFIG_SYS_LONGHELP			/* undef to save memory		*/
+#define	CONFIG_SYS_PROMPT	"=> "		/* Monitor Command Prompt	*/
 #if defined(CONFIG_CMD_KGDB)
-#define	CFG_CBSIZE	1024		/* Console I/O Buffer Size	*/
+#define	CONFIG_SYS_CBSIZE	1024		/* Console I/O Buffer Size	*/
 #else
-#define	CFG_CBSIZE	256		/* Console I/O Buffer Size	*/
+#define	CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size	*/
 #endif
-#define	CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define	CFG_MAXARGS	16		/* max number of command args	*/
-#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+#define	CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define	CONFIG_SYS_MAXARGS	16		/* max number of command args	*/
+#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
 
-#define CFG_MEMTEST_START	0x00400000	/* memtest works on	*/
-#define CFG_MEMTEST_END		0x01c00000	/* 4 ... 28 MB in DRAM	*/
+#define CONFIG_SYS_MEMTEST_START	0x00400000	/* memtest works on	*/
+#define CONFIG_SYS_MEMTEST_END		0x01c00000	/* 4 ... 28 MB in DRAM	*/
 
-#define	CFG_LOAD_ADDR		0x100000	/* default load address	*/
+#define	CONFIG_SYS_LOAD_ADDR		0x100000	/* default load address	*/
 
-#define	CFG_HZ		1000		/* decrementer freq: 1 ms ticks	*/
+#define	CONFIG_SYS_HZ		1000		/* decrementer freq: 1 ms ticks	*/
 
-#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
 
 /*
  * Low Level Configuration Settings
@@ -164,19 +164,19 @@
 
 /*-----------------------------------------------------------------------
  * Low Level Cogent settings
- * if CFG_CMA_CONS_SERIAL is defined, make sure the 8260 CPM serial is not.
+ * if CONFIG_SYS_CMA_CONS_SERIAL is defined, make sure the 8260 CPM serial is not.
  * also, make sure CONFIG_CONS_INDEX is still defined - the index will be
  * 1 for serialA, 2 for serialB, 3 for ser2A, 4 for ser2B
  * (second 2 for CMA120 only)
  */
-#define CFG_CMA_MB_BASE		0x00000000	/* base of m/b address space */
+#define CONFIG_SYS_CMA_MB_BASE		0x00000000	/* base of m/b address space */
 
 #include <configs/cogent_common.h>
 
 #ifdef CONFIG_CONS_NONE
-#define CFG_CMA_CONS_SERIAL	/* use Cogent motherboard serial for console */
+#define CONFIG_SYS_CMA_CONS_SERIAL	/* use Cogent motherboard serial for console */
 #endif
-#define CFG_CMA_LCD_HEARTBEAT	/* define for sec rotator in lcd corner */
+#define CONFIG_SYS_CMA_LCD_HEARTBEAT	/* define for sec rotator in lcd corner */
 #define CONFIG_SHOW_ACTIVITY
 
 #if (CMA_MB_CAPS & CMA_MB_CAP_FLASH)
@@ -197,81 +197,81 @@
 /*-----------------------------------------------------------------------
  * Hard Reset Configuration Words
  *
- * if you change bits in the HRCW, you must also change the CFG_*
+ * if you change bits in the HRCW, you must also change the CONFIG_SYS_*
  * defines for the various registers affected by the HRCW e.g. changing
- * HRCW_DPPCxx requires you to also change CFG_SIUMCR.
+ * HRCW_DPPCxx requires you to also change CONFIG_SYS_SIUMCR.
  */
-#define CFG_HRCW_MASTER	(HRCW_EBM|HRCW_BPS10|HRCW_L2CPC10|HRCW_DPPC11|\
+#define CONFIG_SYS_HRCW_MASTER	(HRCW_EBM|HRCW_BPS10|HRCW_L2CPC10|HRCW_DPPC11|\
 			 HRCW_ISB100|HRCW_MMR11|HRCW_MODCK_H0101)
 /* no slaves so just duplicate the master hrcw */
-#define CFG_HRCW_SLAVE1	CFG_HRCW_MASTER
-#define CFG_HRCW_SLAVE2	CFG_HRCW_MASTER
-#define CFG_HRCW_SLAVE3	CFG_HRCW_MASTER
-#define CFG_HRCW_SLAVE4	CFG_HRCW_MASTER
-#define CFG_HRCW_SLAVE5	CFG_HRCW_MASTER
-#define CFG_HRCW_SLAVE6	CFG_HRCW_MASTER
-#define CFG_HRCW_SLAVE7	CFG_HRCW_MASTER
+#define CONFIG_SYS_HRCW_SLAVE1	CONFIG_SYS_HRCW_MASTER
+#define CONFIG_SYS_HRCW_SLAVE2	CONFIG_SYS_HRCW_MASTER
+#define CONFIG_SYS_HRCW_SLAVE3	CONFIG_SYS_HRCW_MASTER
+#define CONFIG_SYS_HRCW_SLAVE4	CONFIG_SYS_HRCW_MASTER
+#define CONFIG_SYS_HRCW_SLAVE5	CONFIG_SYS_HRCW_MASTER
+#define CONFIG_SYS_HRCW_SLAVE6	CONFIG_SYS_HRCW_MASTER
+#define CONFIG_SYS_HRCW_SLAVE7	CONFIG_SYS_HRCW_MASTER
 
 /*-----------------------------------------------------------------------
  * Internal Memory Mapped Register
  */
-#define CFG_IMMR		0xF0000000
+#define CONFIG_SYS_IMMR		0xF0000000
 
 /*-----------------------------------------------------------------------
  * Definitions for initial stack pointer and data area (in DPRAM)
  */
-#define CFG_INIT_RAM_ADDR	CFG_IMMR
-#define	CFG_INIT_RAM_END	0x4000	/* End of used area in DPRAM	*/
-#define	CFG_GBL_DATA_SIZE	128  /* size in bytes reserved for initial data */
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define	CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_IMMR
+#define	CONFIG_SYS_INIT_RAM_END	0x4000	/* End of used area in DPRAM	*/
+#define	CONFIG_SYS_GBL_DATA_SIZE	128  /* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define	CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
 /*-----------------------------------------------------------------------
  * Start addresses for the final memory configuration
  * (Set up by the startup code)
- * Please note that CFG_SDRAM_BASE _must_ start at 0
+ * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
  */
-#define	CFG_SDRAM_BASE		CMA_MB_RAM_BASE
+#define	CONFIG_SYS_SDRAM_BASE		CMA_MB_RAM_BASE
 #ifdef CONFIG_CMA302
-#define CFG_FLASH_BASE		CMA_MB_SLOT2_BASE	/* cma302 in slot 2 */
+#define CONFIG_SYS_FLASH_BASE		CMA_MB_SLOT2_BASE	/* cma302 in slot 2 */
 #else
-#define CFG_FLASH_BASE		CMA_MB_FLASH_BASE	/* flash on m/b */
+#define CONFIG_SYS_FLASH_BASE		CMA_MB_FLASH_BASE	/* flash on m/b */
 #endif
-#define	CFG_MONITOR_BASE	TEXT_BASE
-#define	CFG_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor	*/
-#define	CFG_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()*/
+#define	CONFIG_SYS_MONITOR_BASE	TEXT_BASE
+#define	CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor	*/
+#define	CONFIG_SYS_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()*/
 
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define	CFG_BOOTMAPSZ		(8 << 20)	/* Initial Mem map for Linux*/
+#define	CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Mem map for Linux*/
 
 /*-----------------------------------------------------------------------
  * FLASH organization
  */
-#define CFG_MAX_FLASH_BANKS	2	/* max num of memory banks	*/
-#define CFG_MAX_FLASH_SECT	67	/* max num of sects on one chip	*/
+#define CONFIG_SYS_MAX_FLASH_BANKS	2	/* max num of memory banks	*/
+#define CONFIG_SYS_MAX_FLASH_SECT	67	/* max num of sects on one chip	*/
 
-#define CFG_FLASH_ERASE_TOUT	120000	/* Flash Erase Timeout (in ms)	*/
-#define CFG_FLASH_WRITE_TOUT	500	/* Flash Write Timeout (in ms)	*/
+#define CONFIG_SYS_FLASH_ERASE_TOUT	120000	/* Flash Erase Timeout (in ms)	*/
+#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Flash Write Timeout (in ms)	*/
 
-#define	CFG_ENV_IS_IN_FLASH	1
-#define CFG_ENV_ADDR		CFG_FLASH_BASE /* Addr of Environment Sector */
+#define	CONFIG_ENV_IS_IN_FLASH	1
+#define CONFIG_ENV_ADDR		CONFIG_SYS_FLASH_BASE /* Addr of Environment Sector */
 #ifdef CONFIG_CMA302
-#define	CFG_ENV_SIZE		0x1000	/* Total Size of Environment Sector */
-#define CFG_ENV_SECT_SIZE	(512*1024) /* see README - env sect real size */
+#define	CONFIG_ENV_SIZE		0x1000	/* Total Size of Environment Sector */
+#define CONFIG_ENV_SECT_SIZE	(512*1024) /* see README - env sect real size */
 #else
-#define	CFG_ENV_SIZE		0x4000	/* Total Size of Environment Sector */
+#define	CONFIG_ENV_SIZE		0x4000	/* Total Size of Environment Sector */
 #endif
 
 /*-----------------------------------------------------------------------
  * Cache Configuration
  */
-#define CFG_CACHELINE_SIZE	32	/* For MPC8260 CPU		*/
+#define CONFIG_SYS_CACHELINE_SIZE	32	/* For MPC8260 CPU		*/
 #if defined(CONFIG_CMD_KGDB)
-# define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value*/
+# define CONFIG_SYS_CACHELINE_SHIFT	5	/* log base 2 of the above value*/
 #endif
 
 /*-----------------------------------------------------------------------
@@ -284,29 +284,29 @@
  *
  * HID1 has only read-only information - nothing to set.
  */
-#define CFG_HID0_INIT	(HID0_ICE|HID0_DCE|HID0_ICFI|HID0_DCI|\
+#define CONFIG_SYS_HID0_INIT	(HID0_ICE|HID0_DCE|HID0_ICFI|HID0_DCI|\
 				HID0_IFEM|HID0_ABE)
-#define CFG_HID0_FINAL	(HID0_ICE|HID0_IFEM|HID0_ABE)
-#define CFG_HID2	0
+#define CONFIG_SYS_HID0_FINAL	(HID0_ICE|HID0_IFEM|HID0_ABE)
+#define CONFIG_SYS_HID2	0
 
 /*-----------------------------------------------------------------------
  * RMR - Reset Mode Register					 5-5
  *-----------------------------------------------------------------------
  * turn on Checkstop Reset Enable
  */
-#define CFG_RMR		RMR_CSRE
+#define CONFIG_SYS_RMR		RMR_CSRE
 
 /*-----------------------------------------------------------------------
  * BCR - Bus Configuration					 4-25
  *-----------------------------------------------------------------------
  */
-#define CFG_BCR		BCR_EBM
+#define CONFIG_SYS_BCR		BCR_EBM
 
 /*-----------------------------------------------------------------------
  * SIUMCR - SIU Module Configuration				 4-31
  *-----------------------------------------------------------------------
  */
-#define CFG_SIUMCR	(SIUMCR_DPPC11|SIUMCR_L2CPC10|SIUMCR_MMR11)
+#define CONFIG_SYS_SIUMCR	(SIUMCR_DPPC11|SIUMCR_L2CPC10|SIUMCR_MMR11)
 
 /*-----------------------------------------------------------------------
  * SYPCR - System Protection Control				 4-35
@@ -315,10 +315,10 @@
  * Watchdog & Bus Monitor Timer max, 60x Bus Monitor enable
  */
 #if defined(CONFIG_WATCHDOG)
-#define CFG_SYPCR	(SYPCR_SWTC|SYPCR_BMT|SYPCR_PBME|SYPCR_LBME|\
+#define CONFIG_SYS_SYPCR	(SYPCR_SWTC|SYPCR_BMT|SYPCR_PBME|SYPCR_LBME|\
 			 SYPCR_SWRI|SYPCR_SWP|SYPCR_SWE)
 #else
-#define CFG_SYPCR	(SYPCR_SWTC|SYPCR_BMT|SYPCR_PBME|SYPCR_LBME|\
+#define CONFIG_SYS_SYPCR	(SYPCR_SWTC|SYPCR_BMT|SYPCR_PBME|SYPCR_LBME|\
 			 SYPCR_SWRI|SYPCR_SWP)
 #endif /* CONFIG_WATCHDOG */
 
@@ -328,7 +328,7 @@
  * Clear once per Second and Alarm Interrupt Status, Set 32KHz timersclk,
  * and enable Time Counter
  */
-#define CFG_TMCNTSC	(TMCNTSC_SEC|TMCNTSC_ALR|TMCNTSC_TCF|TMCNTSC_TCE)
+#define CONFIG_SYS_TMCNTSC	(TMCNTSC_SEC|TMCNTSC_ALR|TMCNTSC_TCF|TMCNTSC_TCE)
 
 /*-----------------------------------------------------------------------
  * PISCR - Periodic Interrupt Status and Control		 4-42
@@ -336,20 +336,20 @@
  * Clear Periodic Interrupt Status, Set 32KHz timersclk, and enable
  * Periodic timer
  */
-#define CFG_PISCR	(PISCR_PS|PISCR_PTF|PISCR_PTE)
+#define CONFIG_SYS_PISCR	(PISCR_PS|PISCR_PTF|PISCR_PTE)
 
 /*-----------------------------------------------------------------------
  * SCCR - System Clock Control					 9-8
  *-----------------------------------------------------------------------
  * Ensure DFBRG is Divide by 16
  */
-#define CFG_SCCR	(SCCR_DFBRG01)
+#define CONFIG_SYS_SCCR	(SCCR_DFBRG01)
 
 /*-----------------------------------------------------------------------
  * RCCR - RISC Controller Configuration				13-7
  *-----------------------------------------------------------------------
  */
-#define CFG_RCCR	0
+#define CONFIG_SYS_RCCR	0
 
 #if defined(CONFIG_CMA282)
 
@@ -367,26 +367,26 @@
  * (the *_SIZE vars must be a power of 2)
  */
 
-#define CFG_CMA_CS0_BASE	TEXT_BASE	/* EPROM */
-#define CFG_CMA_CS0_SIZE	(1 << 20)
+#define CONFIG_SYS_CMA_CS0_BASE	TEXT_BASE	/* EPROM */
+#define CONFIG_SYS_CMA_CS0_SIZE	(1 << 20)
 #if 0
-#define CFG_CMA_CS2_BASE	0x10000000	/* Local Bus SDRAM */
-#define CFG_CMA_CS2_SIZE	(16 << 20)
+#define CONFIG_SYS_CMA_CS2_BASE	0x10000000	/* Local Bus SDRAM */
+#define CONFIG_SYS_CMA_CS2_SIZE	(16 << 20)
 #endif
 
 /*
  * CS0 maps the EPROM on the cpu module
- * Set it for 10 wait states, address CFG_MONITOR_BASE and size 1M
+ * Set it for 10 wait states, address CONFIG_SYS_MONITOR_BASE and size 1M
  *
  * Note: We must have already transferred control to the final location
  * of the EPROM before these are used, because when BR0/OR0 are set, the
  * mirror of the eprom at any other addresses will disappear.
  */
 
-/* base address = CFG_CMA_CS0_BASE, 16-bit, no parity, r/o, gpcm (60x bus) */
-#define CFG_BR0_PRELIM	((CFG_CMA_CS0_BASE&BRx_BA_MSK)|BRx_PS_16|BRx_WP|BRx_V)
-/* mask size CFG_CMA_CS0_SIZE, csneg 1/4 early, adr-to-cs 1/2, 10-wait states */
-#define CFG_OR0_PRELIM	(P2SZ_TO_AM(CFG_CMA_CS0_SIZE)|\
+/* base address = CONFIG_SYS_CMA_CS0_BASE, 16-bit, no parity, r/o, gpcm (60x bus) */
+#define CONFIG_SYS_BR0_PRELIM	((CONFIG_SYS_CMA_CS0_BASE&BRx_BA_MSK)|BRx_PS_16|BRx_WP|BRx_V)
+/* mask size CONFIG_SYS_CMA_CS0_SIZE, csneg 1/4 early, adr-to-cs 1/2, 10-wait states */
+#define CONFIG_SYS_OR0_PRELIM	(P2SZ_TO_AM(CONFIG_SYS_CMA_CS0_SIZE)|\
 				ORxG_CSNT|ORxG_ACS_DIV2|ORxG_SCY_10_CLK)
 
 /*
@@ -399,10 +399,10 @@
  */
 
 #if 0
-/* base address = CFG_CMA_CS2_BASE, 32-bit, no parity, ??? */
-#define CFG_BR0_PRELIM	((CFG_CMA_CS2_BASE&BRx_BA_MSK)|BRx_PS_32|/*???*/|BRx_V)
-/* mask size CFG_CMA_CS2_SIZE, CS time normal, ??? */
-#define CFG_OR2_PRELIM	((~(CFG_CMA_CS2_SIZE-1)&ORx_AM_MSK)|/*???*/)
+/* base address = CONFIG_SYS_CMA_CS2_BASE, 32-bit, no parity, ??? */
+#define CONFIG_SYS_BR0_PRELIM	((CONFIG_SYS_CMA_CS2_BASE&BRx_BA_MSK)|BRx_PS_32|/*???*/|BRx_V)
+/* mask size CONFIG_SYS_CMA_CS2_SIZE, CS time normal, ??? */
+#define CONFIG_SYS_OR2_PRELIM	((~(CONFIG_SYS_CMA_CS2_SIZE-1)&ORx_AM_MSK)|/*???*/)
 #endif
 
 #endif
diff --git a/include/configs/cogent_mpc8xx.h b/include/configs/cogent_mpc8xx.h
index ce38af1dd..17bd9a027 100644
--- a/include/configs/cogent_mpc8xx.h
+++ b/include/configs/cogent_mpc8xx.h
@@ -55,8 +55,8 @@
 #define CONFIG_BAUDRATE		230400
 
 #define CONFIG_HARD_I2C		/* I2C with hardware support */
-#define CFG_I2C_SPEED		400000  /* I2C speed and slave address */
-#define CFG_I2C_SLAVE		0x7F
+#define CONFIG_SYS_I2C_SPEED		400000  /* I2C speed and slave address */
+#define CONFIG_SYS_I2C_SLAVE		0x7F
 
 
 /*
@@ -101,27 +101,27 @@
 /*
  * Miscellaneous configurable options
  */
-#define	CFG_LONGHELP			/* undef to save memory		*/
-#define	CFG_PROMPT	"=> "		/* Monitor Command Prompt	*/
+#define	CONFIG_SYS_LONGHELP			/* undef to save memory		*/
+#define	CONFIG_SYS_PROMPT	"=> "		/* Monitor Command Prompt	*/
 #if defined(CONFIG_CMD_KGDB)
-#define	CFG_CBSIZE	1024		/* Console I/O Buffer Size	*/
+#define	CONFIG_SYS_CBSIZE	1024		/* Console I/O Buffer Size	*/
 #else
-#define	CFG_CBSIZE	256		/* Console I/O Buffer Size	*/
+#define	CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size	*/
 #endif
-#define	CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define	CFG_MAXARGS	16		/* max number of command args	*/
-#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+#define	CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define	CONFIG_SYS_MAXARGS	16		/* max number of command args	*/
+#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
 
-#define CFG_MEMTEST_START	0x00400000	/* memtest works on	*/
-#define CFG_MEMTEST_END		0x01c00000	/* 4 ... 28 MB in DRAM	*/
+#define CONFIG_SYS_MEMTEST_START	0x00400000	/* memtest works on	*/
+#define CONFIG_SYS_MEMTEST_END		0x01c00000	/* 4 ... 28 MB in DRAM	*/
 
-#define	CFG_LOAD_ADDR		0x100000	/* default load address	*/
+#define	CONFIG_SYS_LOAD_ADDR		0x100000	/* default load address	*/
 
-#define	CFG_HZ		1000		/* decrementer freq: 1 ms ticks	*/
+#define	CONFIG_SYS_HZ		1000		/* decrementer freq: 1 ms ticks	*/
 
-#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
 
-#define CFG_ALLOC_DPRAM
+#define CONFIG_SYS_ALLOC_DPRAM
 
 /*
  * Low Level Configuration Settings
@@ -131,18 +131,18 @@
 
 /*-----------------------------------------------------------------------
  * Low Level Cogent settings
- * if CFG_CMA_CONS_SERIAL is defined, make sure the 8xx CPM serial is not.
+ * if CONFIG_SYS_CMA_CONS_SERIAL is defined, make sure the 8xx CPM serial is not.
  * also, make sure CONFIG_CONS_INDEX is still defined - the index will be
  * 1 for serialA, 2 for serialB, 3 for ser2A, 4 for ser2B
  * (second 2 for CMA120 only)
  */
-#define CFG_CMA_MB_BASE		0x00000000	/* base of m/b address space */
+#define CONFIG_SYS_CMA_MB_BASE		0x00000000	/* base of m/b address space */
 
 #include <configs/cogent_common.h>
 
-#define CFG_CMA_CONS_SERIAL	/* use Cogent motherboard serial for console */
+#define CONFIG_SYS_CMA_CONS_SERIAL	/* use Cogent motherboard serial for console */
 #define CONFIG_CONS_INDEX	1
-#define CFG_CMA_LCD_HEARTBEAT	/* define for sec rotator in lcd corner */
+#define CONFIG_SYS_CMA_LCD_HEARTBEAT	/* define for sec rotator in lcd corner */
 #define CONFIG_SHOW_ACTIVITY
 #if (CMA_MB_CAPS & CMA_MB_CAP_FLASH)
 /*
@@ -162,61 +162,61 @@
 /*-----------------------------------------------------------------------
  * Internal Memory Mapped Register
  */
-#define CFG_IMMR		0xFF000000
+#define CONFIG_SYS_IMMR		0xFF000000
 
 /*-----------------------------------------------------------------------
  * Definitions for initial stack pointer and data area (in DPRAM)
  */
-#define CFG_INIT_RAM_ADDR	CFG_IMMR
-#define	CFG_INIT_RAM_END	0x2F00	/* End of used area in DPRAM	*/
-#define	CFG_GBL_DATA_SIZE	64  /* size in bytes reserved for initial data */
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define	CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_IMMR
+#define	CONFIG_SYS_INIT_RAM_END	0x2F00	/* End of used area in DPRAM	*/
+#define	CONFIG_SYS_GBL_DATA_SIZE	64  /* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define	CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
 /*-----------------------------------------------------------------------
  * Start addresses for the final memory configuration
  * (Set up by the startup code)
- * Please note that CFG_SDRAM_BASE _must_ start at 0
+ * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
  */
-#define	CFG_SDRAM_BASE		CMA_MB_RAM_BASE
+#define	CONFIG_SYS_SDRAM_BASE		CMA_MB_RAM_BASE
 #ifdef CONFIG_CMA302
-#define CFG_FLASH_BASE		CMA_MB_SLOT2_BASE	/* cma302 in slot 2 */
+#define CONFIG_SYS_FLASH_BASE		CMA_MB_SLOT2_BASE	/* cma302 in slot 2 */
 #else
-#define CFG_FLASH_BASE		CMA_MB_FLASH_BASE	/* flash on m/b */
+#define CONFIG_SYS_FLASH_BASE		CMA_MB_FLASH_BASE	/* flash on m/b */
 #endif
-#define	CFG_MONITOR_BASE	TEXT_BASE
-#define	CFG_MONITOR_LEN		(128 << 10)	/* Reserve 128 kB for Monitor	*/
-#define	CFG_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/
+#define	CONFIG_SYS_MONITOR_BASE	TEXT_BASE
+#define	CONFIG_SYS_MONITOR_LEN		(128 << 10)	/* Reserve 128 kB for Monitor	*/
+#define	CONFIG_SYS_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/
 
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define	CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux	*/
+#define	CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux	*/
 /*-----------------------------------------------------------------------
  * FLASH organization
  */
-#define CFG_MAX_FLASH_BANKS	2	/* max number of memory banks		*/
-#define CFG_MAX_FLASH_SECT	67	/* max number of sectors on one chip	*/
+#define CONFIG_SYS_MAX_FLASH_BANKS	2	/* max number of memory banks		*/
+#define CONFIG_SYS_MAX_FLASH_SECT	67	/* max number of sectors on one chip	*/
 
-#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
-#define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
+#define CONFIG_SYS_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
+#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
 
-#define	CFG_ENV_IS_IN_FLASH	1
-#define CFG_ENV_ADDR		CFG_FLASH_BASE /* Addr of Environment Sector */
+#define	CONFIG_ENV_IS_IN_FLASH	1
+#define CONFIG_ENV_ADDR		CONFIG_SYS_FLASH_BASE /* Addr of Environment Sector */
 #ifdef CONFIG_CMA302
-#define	CFG_ENV_SIZE		0x1000	/* Total Size of Environment Sector	*/
-#define CFG_ENV_SECT_SIZE	(512*1024) /* see README - env sect real size */
+#define	CONFIG_ENV_SIZE		0x1000	/* Total Size of Environment Sector	*/
+#define CONFIG_ENV_SECT_SIZE	(512*1024) /* see README - env sect real size */
 #else
-#define	CFG_ENV_SIZE		0x4000	/* Total Size of Environment Sector	*/
+#define	CONFIG_ENV_SIZE		0x4000	/* Total Size of Environment Sector	*/
 #endif
 /*-----------------------------------------------------------------------
  * Cache Configuration
  */
-#define CFG_CACHELINE_SIZE	16	/* For all MPC8xx CPUs			*/
+#define CONFIG_SYS_CACHELINE_SIZE	16	/* For all MPC8xx CPUs			*/
 #if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT	4	/* log base 2 of the above value	*/
+#define CONFIG_SYS_CACHELINE_SHIFT	4	/* log base 2 of the above value	*/
 #endif
 
 
@@ -227,10 +227,10 @@
  * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze
  */
 #if defined(CONFIG_WATCHDOG)
-#define CFG_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
+#define CONFIG_SYS_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
 			 SYPCR_SWE  | SYPCR_SWRI| SYPCR_SWP)
 #else
-#define CFG_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
+#define CONFIG_SYS_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
 #endif	/* CONFIG_WATCHDOG */
 
 /*-----------------------------------------------------------------------
@@ -238,21 +238,21 @@
  *-----------------------------------------------------------------------
  * PCMCIA config., multi-function pin tri-state
  */
-#define CFG_SIUMCR	(SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_MLRC01)
+#define CONFIG_SYS_SIUMCR	(SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_MLRC01)
 
 /*-----------------------------------------------------------------------
  * TBSCR - Time Base Status and Control				11-26
  *-----------------------------------------------------------------------
  * Clear Reference Interrupt Status, Timebase freezing enabled
  */
-#define CFG_TBSCR	(TBSCR_REFA | TBSCR_REFB | TBSCR_TBF)
+#define CONFIG_SYS_TBSCR	(TBSCR_REFA | TBSCR_REFB | TBSCR_TBF)
 
 /*-----------------------------------------------------------------------
  * PISCR - Periodic Interrupt Status and Control		11-31
  *-----------------------------------------------------------------------
  * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
  */
-#define CFG_PISCR	(PISCR_PS | PISCR_PITF)
+#define CONFIG_SYS_PISCR	(PISCR_PS | PISCR_PITF)
 
 /*-----------------------------------------------------------------------
  * PLPRCR - PLL, Low-Power, and Reset Control Register		15-30
@@ -260,7 +260,7 @@
  * Reset PLL lock status sticky bit, timer expired status bit and timer
  * interrupt status bit - leave PLL multiplication factor unchanged !
  */
-#define CFG_PLPRCR	(PLPRCR_SPLSS | PLPRCR_TEXPS | PLPRCR_TMIST)
+#define CONFIG_SYS_PLPRCR	(PLPRCR_SPLSS | PLPRCR_TEXPS | PLPRCR_TMIST)
 
 /*-----------------------------------------------------------------------
  * SCCR - System Clock and reset Control Register		15-27
@@ -269,7 +269,7 @@
  * power management and some other internal clocks
  */
 #define SCCR_MASK	SCCR_EBDF11
-#define CFG_SCCR	(SCCR_TBS     | SCCR_RTDIV    | SCCR_RTSEL    | \
+#define CONFIG_SYS_SCCR	(SCCR_TBS     | SCCR_RTDIV    | SCCR_RTSEL    | \
 			 SCCR_COM00   | SCCR_DFSYNC00 | SCCR_DFBRG00  | \
 			 SCCR_DFNL000 | SCCR_DFNH000  | SCCR_DFLCD000 | \
 			 SCCR_DFALCD00)
@@ -279,29 +279,29 @@
  *-----------------------------------------------------------------------
  *
  */
-#define CFG_PCMCIA_MEM_ADDR	(0xE0000000)
-#define CFG_PCMCIA_MEM_SIZE	( 64 << 20 )
-#define CFG_PCMCIA_DMA_ADDR	(0xE4000000)
-#define CFG_PCMCIA_DMA_SIZE	( 64 << 20 )
-#define CFG_PCMCIA_ATTRB_ADDR	(0xE8000000)
-#define CFG_PCMCIA_ATTRB_SIZE	( 64 << 20 )
-#define CFG_PCMCIA_IO_ADDR	(0xEC000000)
-#define CFG_PCMCIA_IO_SIZE	( 64 << 20 )
+#define CONFIG_SYS_PCMCIA_MEM_ADDR	(0xE0000000)
+#define CONFIG_SYS_PCMCIA_MEM_SIZE	( 64 << 20 )
+#define CONFIG_SYS_PCMCIA_DMA_ADDR	(0xE4000000)
+#define CONFIG_SYS_PCMCIA_DMA_SIZE	( 64 << 20 )
+#define CONFIG_SYS_PCMCIA_ATTRB_ADDR	(0xE8000000)
+#define CONFIG_SYS_PCMCIA_ATTRB_SIZE	( 64 << 20 )
+#define CONFIG_SYS_PCMCIA_IO_ADDR	(0xEC000000)
+#define CONFIG_SYS_PCMCIA_IO_SIZE	( 64 << 20 )
 
 /*-----------------------------------------------------------------------
  *
  *-----------------------------------------------------------------------
  *
  */
-/*#define	CFG_DER	0x2002000F*/
-#define CFG_DER	0
+/*#define	CONFIG_SYS_DER	0x2002000F*/
+#define CONFIG_SYS_DER	0
 
 #if defined(CONFIG_CMA286_60_OLD)
 
 /*
  * Init Memory Controller:
  *
- * NOTE: although the names (CFG_xRn_PRELIM) suggest preliminary settings,
+ * NOTE: although the names (CONFIG_SYS_xRn_PRELIM) suggest preliminary settings,
  * they are actually the final settings for this cpu/board, because the
  * flash and RAM are on the motherboard, accessed via the CMAbus, and the
  * mappings are pretty much fixed.
@@ -309,58 +309,58 @@
  * (the *_SIZE vars must be a power of 2)
  */
 
-#define CFG_CMA_CS0_BASE	TEXT_BASE		/* EPROM */
-#define CFG_CMA_CS0_SIZE	(1 << 20)
-#define CFG_CMA_CS1_BASE	CMA_MB_RAM_BASE		/* RAM + I/O SLOT 1 */
-#define CFG_CMA_CS1_SIZE	(64 << 20)
-#define CFG_CMA_CS2_BASE	CMA_MB_SLOT2_BASE	/* I/O SLOTS 2 + 3 */
-#define CFG_CMA_CS2_SIZE	(64 << 20)
-#define CFG_CMA_CS3_BASE	CMA_MB_ROMLOW_BASE	/* M/B I/O */
-#define CFG_CMA_CS3_SIZE	(32 << 20)
+#define CONFIG_SYS_CMA_CS0_BASE	TEXT_BASE		/* EPROM */
+#define CONFIG_SYS_CMA_CS0_SIZE	(1 << 20)
+#define CONFIG_SYS_CMA_CS1_BASE	CMA_MB_RAM_BASE		/* RAM + I/O SLOT 1 */
+#define CONFIG_SYS_CMA_CS1_SIZE	(64 << 20)
+#define CONFIG_SYS_CMA_CS2_BASE	CMA_MB_SLOT2_BASE	/* I/O SLOTS 2 + 3 */
+#define CONFIG_SYS_CMA_CS2_SIZE	(64 << 20)
+#define CONFIG_SYS_CMA_CS3_BASE	CMA_MB_ROMLOW_BASE	/* M/B I/O */
+#define CONFIG_SYS_CMA_CS3_SIZE	(32 << 20)
 
 /*
  * CS0 maps the EPROM on the cpu module
- * Set it for 4 wait states, address CFG_MONITOR_BASE and size 1M
+ * Set it for 4 wait states, address CONFIG_SYS_MONITOR_BASE and size 1M
  *
  * Note: We must have already transferred control to the final location
  * of the EPROM before these are used, because when BR0/OR0 are set, the
  * mirror of the eprom at any other addresses will disappear.
  */
 
-/* base address = CFG_CMA_CS0_BASE, 16-bit, no parity, r/o, gpcm */
-#define CFG_BR0_PRELIM	((CFG_CMA_CS0_BASE&BR_BA_MSK)|BR_PS_16|BR_WP|BR_V)
-/* mask size CFG_CMA_CS0_SIZE, CS time normal, burst inhibit, 4-wait states */
-#define CFG_OR0_PRELIM	((~(CFG_CMA_CS0_SIZE-1)&OR_AM_MSK)|OR_BI|OR_SCY_4_CLK)
+/* base address = CONFIG_SYS_CMA_CS0_BASE, 16-bit, no parity, r/o, gpcm */
+#define CONFIG_SYS_BR0_PRELIM	((CONFIG_SYS_CMA_CS0_BASE&BR_BA_MSK)|BR_PS_16|BR_WP|BR_V)
+/* mask size CONFIG_SYS_CMA_CS0_SIZE, CS time normal, burst inhibit, 4-wait states */
+#define CONFIG_SYS_OR0_PRELIM	((~(CONFIG_SYS_CMA_CS0_SIZE-1)&OR_AM_MSK)|OR_BI|OR_SCY_4_CLK)
 
 /*
  * CS1 maps motherboard DRAM and motherboard I/O slot 1
  * (each 32Mbyte in size)
  */
 
-/* base address = CFG_CMA_CS1_BASE, 32-bit, no parity, r/w, gpcm */
-#define CFG_BR1_PRELIM	((CFG_CMA_CS1_BASE&BR_BA_MSK)|BR_V)
-/* mask size CFG_CMA_CS1_SIZE, CS time normal, burst ok, ext xfer ack */
-#define CFG_OR1_PRELIM	((~(CFG_CMA_CS1_SIZE-1)&OR_AM_MSK)|OR_SETA)
+/* base address = CONFIG_SYS_CMA_CS1_BASE, 32-bit, no parity, r/w, gpcm */
+#define CONFIG_SYS_BR1_PRELIM	((CONFIG_SYS_CMA_CS1_BASE&BR_BA_MSK)|BR_V)
+/* mask size CONFIG_SYS_CMA_CS1_SIZE, CS time normal, burst ok, ext xfer ack */
+#define CONFIG_SYS_OR1_PRELIM	((~(CONFIG_SYS_CMA_CS1_SIZE-1)&OR_AM_MSK)|OR_SETA)
 
 /*
  * CS2 maps motherboard I/O slots 2 and 3
  * (each 32Mbyte in size)
  */
 
-/* base address = CFG_CMA_CS2_BASE, 32-bit, no parity, r/w, gpcm */
-#define CFG_BR2_PRELIM	((CFG_CMA_CS2_BASE&BR_BA_MSK)|BR_V)
-/* mask size CFG_CMA_CS2_SIZE, CS time normal, burst ok, ext xfer ack */
-#define CFG_OR2_PRELIM	((~(CFG_CMA_CS2_SIZE-1)&OR_AM_MSK)|OR_SETA)
+/* base address = CONFIG_SYS_CMA_CS2_BASE, 32-bit, no parity, r/w, gpcm */
+#define CONFIG_SYS_BR2_PRELIM	((CONFIG_SYS_CMA_CS2_BASE&BR_BA_MSK)|BR_V)
+/* mask size CONFIG_SYS_CMA_CS2_SIZE, CS time normal, burst ok, ext xfer ack */
+#define CONFIG_SYS_OR2_PRELIM	((~(CONFIG_SYS_CMA_CS2_SIZE-1)&OR_AM_MSK)|OR_SETA)
 
 /*
  * CS3 maps motherboard I/O
  * (32Mbyte in size)
  */
 
-/* base address = CFG_CMA_CS3_BASE, 32-bit, no parity, r/w, gpcm */
-#define CFG_BR3_PRELIM	((CFG_CMA_CS3_BASE&BR_BA_MSK)|BR_V)
-/* mask size CFG_CMA_CS3_SIZE, CS time normal, burst inhibit, ext xfer ack */
-#define CFG_OR3_PRELIM	((~(CFG_CMA_CS3_SIZE-1)&OR_AM_MSK)|OR_BI|OR_SETA)
+/* base address = CONFIG_SYS_CMA_CS3_BASE, 32-bit, no parity, r/w, gpcm */
+#define CONFIG_SYS_BR3_PRELIM	((CONFIG_SYS_CMA_CS3_BASE&BR_BA_MSK)|BR_V)
+/* mask size CONFIG_SYS_CMA_CS3_SIZE, CS time normal, burst inhibit, ext xfer ack */
+#define CONFIG_SYS_OR3_PRELIM	((~(CONFIG_SYS_CMA_CS3_SIZE-1)&OR_AM_MSK)|OR_BI|OR_SETA)
 
 #endif
 
diff --git a/include/configs/cpci5200.h b/include/configs/cpci5200.h
index fffd1fe1f..b9dabac98 100644
--- a/include/configs/cpci5200.h
+++ b/include/configs/cpci5200.h
@@ -45,7 +45,7 @@
 #define CONFIG_CPCI5200		1	/* ... on CPCI5200  board */
 #define CONFIG_MPC5200_DDR	1	/* ... use DDR RAM	  */
 
-#define CFG_MPC5XXX_CLKIN	33000000	/* ... running at 33.000000MHz */
+#define CONFIG_SYS_MPC5XXX_CLKIN	33000000	/* ... running at 33.000000MHz */
 
 #define BOOTFLAG_COLD		0x01	/* Normal Power-On: Boot from FLASH  */
 #define BOOTFLAG_WARM		0x02	/* Software reboot	     */
@@ -57,7 +57,7 @@
  */
 #define CONFIG_PSC_CONSOLE	1	/* console is on PSC1 */
 #define CONFIG_BAUDRATE		9600	/* ... at 115200 bps */
-#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
 
 #ifdef CONFIG_MPC5200		/* MPC5100 PCI is not supported yet. */
 /*
@@ -86,7 +86,7 @@
 #if 0				/* test-only !!! */
 #define CONFIG_NET_MULTI	1
 #define CONFIG_EEPRO100		1
-#define CFG_RX_ETH_BUFFER	8	/* use 8 rx buffer on eepro100	*/
+#define CONFIG_SYS_RX_ETH_BUFFER	8	/* use 8 rx buffer on eepro100	*/
 #define CONFIG_NS8382X		1
 #endif
 
@@ -130,12 +130,12 @@
 #define CONFIG_CMD_DATE
 
 #if (TEXT_BASE == 0xFF000000)	/* Boot low with 16 MB Flash */
-#   define CFG_LOWBOOT		1
-#   define CFG_LOWBOOT16	1
+#   define CONFIG_SYS_LOWBOOT		1
+#   define CONFIG_SYS_LOWBOOT16	1
 #endif
 #if (TEXT_BASE == 0xFF800000)	/* Boot low with  8 MB Flash */
-#   define CFG_LOWBOOT		1
-#   define CFG_LOWBOOT08	1
+#   define CONFIG_SYS_LOWBOOT		1
+#   define CONFIG_SYS_LOWBOOT08	1
 #endif
 
 /*
@@ -172,61 +172,61 @@
 #if defined(CONFIG_MPC5200)
 
 #define CONFIG_RTC_M48T35A	1	/* ST Electronics M48 timekeeper */
-#define CFG_NVRAM_BASE_ADDR	0xfd010000
-#define CFG_NVRAM_SIZE		32*1024
+#define CONFIG_SYS_NVRAM_BASE_ADDR	0xfd010000
+#define CONFIG_SYS_NVRAM_SIZE		32*1024
 
 /*
  * IPB Bus clocking configuration.
  */
-#undef CFG_IPBCLK_EQUALS_XLBCLK		/* define for 133MHz speed */
+#undef CONFIG_SYS_IPBCLK_EQUALS_XLBCLK		/* define for 133MHz speed */
 #endif
 /*
  * I2C configuration
  */
 #define CONFIG_HARD_I2C		1	/* I2C with hardware support */
-#define CFG_I2C_MODULE		1	/* Select I2C module #1 or #2 */
+#define CONFIG_SYS_I2C_MODULE		1	/* Select I2C module #1 or #2 */
 
-#define CFG_I2C_SPEED		86000	/* 100 kHz */
-#define CFG_I2C_SLAVE		0x7F
+#define CONFIG_SYS_I2C_SPEED		86000	/* 100 kHz */
+#define CONFIG_SYS_I2C_SLAVE		0x7F
 
 /*
  * EEPROM configuration
  */
-#define CFG_I2C_EEPROM_ADDR		0x50	/* 1010000x */
-#define CFG_I2C_EEPROM_ADDR_LEN		2
-#define CFG_EEPROM_PAGE_WRITE_BITS	5
-#define CFG_EEPROM_PAGE_WRITE_DELAY_MS	20
-#define CFG_I2C_MULTI_EEPROMS		1
+#define CONFIG_SYS_I2C_EEPROM_ADDR		0x50	/* 1010000x */
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN		2
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS	5
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	20
+#define CONFIG_SYS_I2C_MULTI_EEPROMS		1
 /*
  * Flash configuration
  */
 
-#define CFG_FLASH_CFI		1	/* Flash is CFI conformant	     */
-#define CFG_FLASH_BASE		0xFE000000
-#define CFG_FLASH_SIZE		0x02000000
-#define CFG_FLASH_INCREMENT	0x01000000
-#define CFG_ENV_ADDR		(CFG_FLASH_BASE + 0x00000000)
-#define CFG_MAX_FLASH_BANKS	2	/* max num of memory banks	*/
-#define CFG_MAX_FLASH_SECT	128
+#define CONFIG_SYS_FLASH_CFI		1	/* Flash is CFI conformant	     */
+#define CONFIG_SYS_FLASH_BASE		0xFE000000
+#define CONFIG_SYS_FLASH_SIZE		0x02000000
+#define CONFIG_SYS_FLASH_INCREMENT	0x01000000
+#define CONFIG_ENV_ADDR		(CONFIG_SYS_FLASH_BASE + 0x00000000)
+#define CONFIG_SYS_MAX_FLASH_BANKS	2	/* max num of memory banks	*/
+#define CONFIG_SYS_MAX_FLASH_SECT	128
 
-#define CFG_FLASH_PROTECTION	1	/* use hardware protection	     */
-#define CFG_FLASH_USE_BUFFER_WRITE 1	/* use buffered writes (20x faster)  */
+#define CONFIG_SYS_FLASH_PROTECTION	1	/* use hardware protection	     */
+#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1	/* use buffered writes (20x faster)  */
 
-#define CFG_FLASH_ERASE_TOUT	240000	/* Flash Erase Timeout (in ms)	*/
-#define CFG_FLASH_WRITE_TOUT	500	/* Flash Write Timeout (in ms)	*/
+#define CONFIG_SYS_FLASH_ERASE_TOUT	240000	/* Flash Erase Timeout (in ms)	*/
+#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Flash Write Timeout (in ms)	*/
 
 /*
  * Environment settings
  */
 #if 1				/* test-only */
-#define CFG_ENV_IS_IN_FLASH	1
-#define CFG_ENV_SIZE		0x20000
-#define CFG_ENV_SECT_SIZE	0x20000
+#define CONFIG_ENV_IS_IN_FLASH	1
+#define CONFIG_ENV_SIZE		0x20000
+#define CONFIG_ENV_SECT_SIZE	0x20000
 #define CONFIG_ENV_OVERWRITE	1
 #else
-#define CFG_ENV_IS_IN_EEPROM	1	/* use EEPROM for environment vars */
-#define CFG_ENV_OFFSET		0x0000	/* environment starts at the beginning of the EEPROM */
-#define CFG_ENV_SIZE		0x0400	/* 8192 bytes may be used for env vars */
+#define CONFIG_ENV_IS_IN_EEPROM	1	/* use EEPROM for environment vars */
+#define CONFIG_ENV_OFFSET		0x0000	/* environment starts at the beginning of the EEPROM */
+#define CONFIG_ENV_SIZE		0x0400	/* 8192 bytes may be used for env vars */
 				   /* total size of a CAT24WC32 is 8192 bytes */
 #define CONFIG_ENV_OVERWRITE	1
 #endif
@@ -234,26 +234,26 @@
 /*
  * Memory map
  */
-#define CFG_MBAR		0xF0000000
-#define CFG_SDRAM_BASE		0x00000000
-#define CFG_DEFAULT_MBAR	0x80000000
+#define CONFIG_SYS_MBAR		0xF0000000
+#define CONFIG_SYS_SDRAM_BASE		0x00000000
+#define CONFIG_SYS_DEFAULT_MBAR	0x80000000
 
 /* Use SRAM until RAM will be available */
-#define CFG_INIT_RAM_ADDR	MPC5XXX_SRAM
-#define CFG_INIT_RAM_END	MPC5XXX_SRAM_SIZE	/* End of used area in DPRAM */
+#define CONFIG_SYS_INIT_RAM_ADDR	MPC5XXX_SRAM
+#define CONFIG_SYS_INIT_RAM_END	MPC5XXX_SRAM_SIZE	/* End of used area in DPRAM */
 
-#define CFG_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
-#define CFG_MONITOR_BASE    TEXT_BASE
-#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
-#   define CFG_RAMBOOT		1
+#define CONFIG_SYS_MONITOR_BASE    TEXT_BASE
+#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
+#   define CONFIG_SYS_RAMBOOT		1
 #endif
 
-#define CFG_MONITOR_LEN		(192 << 10)	/* Reserve 192 kB for Monitor	*/
-#define CFG_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/
-#define CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
+#define CONFIG_SYS_MONITOR_LEN		(192 << 10)	/* Reserve 192 kB for Monitor	*/
+#define CONFIG_SYS_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/
+#define CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
 
 /*
  * Ethernet configuration
@@ -269,66 +269,66 @@
 /*
  * GPIO configuration
  */
-#define CFG_GPS_PORT_CONFIG	0x01052444
+#define CONFIG_SYS_GPS_PORT_CONFIG	0x01052444
 
 /*
  * Miscellaneous configurable options
  */
-#define CFG_LONGHELP		/* undef to save memory	    */
-#define CFG_PROMPT		"=> "	/* Monitor Command Prompt   */
+#define CONFIG_SYS_LONGHELP		/* undef to save memory	    */
+#define CONFIG_SYS_PROMPT		"=> "	/* Monitor Command Prompt   */
 #if defined(CONFIG_CMD_KGDB)
-#define CFG_CBSIZE		1024	/* Console I/O Buffer Size  */
+#define CONFIG_SYS_CBSIZE		1024	/* Console I/O Buffer Size  */
 #else
-#define CFG_CBSIZE		256	/* Console I/O Buffer Size  */
+#define CONFIG_SYS_CBSIZE		256	/* Console I/O Buffer Size  */
 #endif
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16)	/* Print Buffer Size */
-#define CFG_MAXARGS		16	/* max number of command args	*/
-#define CFG_BARGSIZE		CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)	/* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS		16	/* max number of command args	*/
+#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
 
-#define CFG_MEMTEST_START	0x00100000	/* memtest works on */
-#define CFG_MEMTEST_END		0x00f00000	/* 1 ... 15 MB in DRAM	*/
+#define CONFIG_SYS_MEMTEST_START	0x00100000	/* memtest works on */
+#define CONFIG_SYS_MEMTEST_END		0x00f00000	/* 1 ... 15 MB in DRAM	*/
 
-#define CFG_LOAD_ADDR		0x100000	/* default load address */
+#define CONFIG_SYS_LOAD_ADDR		0x100000	/* default load address */
 
-#define CFG_HZ			1000	/* decrementer freq: 1 ms ticks */
+#define CONFIG_SYS_HZ			1000	/* decrementer freq: 1 ms ticks */
 
-#define CFG_VXWORKS_MAC_PTR	0x00000000	/* Pass Ethernet MAC to VxWorks */
+#define CONFIG_SYS_VXWORKS_MAC_PTR	0x00000000	/* Pass Ethernet MAC to VxWorks */
 
-#define CFG_CACHELINE_SIZE	32	/* For MPC5xxx CPUs */
+#define CONFIG_SYS_CACHELINE_SIZE	32	/* For MPC5xxx CPUs */
 #if defined(CONFIG_CMD_KGDB)
-#  define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value */
+#  define CONFIG_SYS_CACHELINE_SHIFT	5	/* log base 2 of the above value */
 #endif
 
 /*
  * Various low-level settings
  */
 #if defined(CONFIG_MPC5200)
-#define CFG_HID0_INIT		HID0_ICE | HID0_ICFI
-#define CFG_HID0_FINAL		HID0_ICE
+#define CONFIG_SYS_HID0_INIT		HID0_ICE | HID0_ICFI
+#define CONFIG_SYS_HID0_FINAL		HID0_ICE
 #else
-#define CFG_HID0_INIT		0
-#define CFG_HID0_FINAL		0
+#define CONFIG_SYS_HID0_INIT		0
+#define CONFIG_SYS_HID0_FINAL		0
 #endif
 
-#define CFG_BOOTCS_START	CFG_FLASH_BASE
-#define CFG_BOOTCS_SIZE		CFG_FLASH_SIZE
-#define CFG_BOOTCS_CFG		0x0004DD00
+#define CONFIG_SYS_BOOTCS_START	CONFIG_SYS_FLASH_BASE
+#define CONFIG_SYS_BOOTCS_SIZE		CONFIG_SYS_FLASH_SIZE
+#define CONFIG_SYS_BOOTCS_CFG		0x0004DD00
 
-#define CFG_CS0_START		CFG_FLASH_BASE
-#define CFG_CS0_SIZE		CFG_FLASH_SIZE
+#define CONFIG_SYS_CS0_START		CONFIG_SYS_FLASH_BASE
+#define CONFIG_SYS_CS0_SIZE		CONFIG_SYS_FLASH_SIZE
 
-#define CFG_CS1_START		0xfd000000
-#define CFG_CS1_SIZE		0x00010000
-#define CFG_CS1_CFG		0x10101410
+#define CONFIG_SYS_CS1_START		0xfd000000
+#define CONFIG_SYS_CS1_SIZE		0x00010000
+#define CONFIG_SYS_CS1_CFG		0x10101410
 
-#define CFG_CS3_START		0xfd010000
-#define CFG_CS3_SIZE		0x00010000
-#define CFG_CS3_CFG		0x10109410
+#define CONFIG_SYS_CS3_START		0xfd010000
+#define CONFIG_SYS_CS3_SIZE		0x00010000
+#define CONFIG_SYS_CS3_CFG		0x10109410
 
-#define CFG_CS_BURST		0x00000000
-#define CFG_CS_DEADCYCLE	0x33333333
+#define CONFIG_SYS_CS_BURST		0x00000000
+#define CONFIG_SYS_CS_DEADCYCLE	0x33333333
 
-#define CFG_RESET_ADDRESS	0xff000000
+#define CONFIG_SYS_RESET_ADDRESS	0xff000000
 
 /*-----------------------------------------------------------------------
  * USB stuff
@@ -350,71 +350,71 @@
 #define	CONFIG_IDE_RESET	/* reset for ide supported	*/
 #define CONFIG_IDE_PREINIT
 
-#define CFG_IDE_MAXBUS		1	/* max. 1 IDE bus		*/
-#define CFG_IDE_MAXDEVICE	1	/* max. 1 drive per IDE bus	*/
+#define CONFIG_SYS_IDE_MAXBUS		1	/* max. 1 IDE bus		*/
+#define CONFIG_SYS_IDE_MAXDEVICE	1	/* max. 1 drive per IDE bus	*/
 
-#define CFG_ATA_IDE0_OFFSET	0x0000
+#define CONFIG_SYS_ATA_IDE0_OFFSET	0x0000
 
-#define CFG_ATA_BASE_ADDR	MPC5XXX_ATA
+#define CONFIG_SYS_ATA_BASE_ADDR	MPC5XXX_ATA
 
 /* Offset for data I/O			*/
-#define CFG_ATA_DATA_OFFSET	(0x0060)
+#define CONFIG_SYS_ATA_DATA_OFFSET	(0x0060)
 
 /* Offset for normal register accesses	*/
-#define CFG_ATA_REG_OFFSET	(CFG_ATA_DATA_OFFSET)
+#define CONFIG_SYS_ATA_REG_OFFSET	(CONFIG_SYS_ATA_DATA_OFFSET)
 
 /* Offset for alternate registers	*/
-#define CFG_ATA_ALT_OFFSET	(0x005C)
+#define CONFIG_SYS_ATA_ALT_OFFSET	(0x005C)
 
 /* Interval between registers						     */
-#define CFG_ATA_STRIDE		4
+#define CONFIG_SYS_ATA_STRIDE		4
 
 /*-----------------------------------------------------------------------
  * CPLD stuff
  */
-#define CFG_FPGA_XC95XL		1	/* using Xilinx XC95XL CPLD	 */
-#define CFG_FPGA_MAX_SIZE	32*1024	/* 32kByte is enough for CPLD	 */
+#define CONFIG_SYS_FPGA_XC95XL		1	/* using Xilinx XC95XL CPLD	 */
+#define CONFIG_SYS_FPGA_MAX_SIZE	32*1024	/* 32kByte is enough for CPLD	 */
 
 /* CPLD program pin configuration */
-#define CFG_FPGA_PRG		0x20000000	/* JTAG TMS pin (ppc output)	       */
-#define CFG_FPGA_CLK		0x10000000	/* JTAG TCK pin (ppc output)	       */
-#define CFG_FPGA_DATA		0x20000000	/* JTAG TDO->TDI data pin (ppc output) */
-#define CFG_FPGA_DONE		0x10000000	/* JTAG TDI->TDO pin (ppc input)       */
+#define CONFIG_SYS_FPGA_PRG		0x20000000	/* JTAG TMS pin (ppc output)	       */
+#define CONFIG_SYS_FPGA_CLK		0x10000000	/* JTAG TCK pin (ppc output)	       */
+#define CONFIG_SYS_FPGA_DATA		0x20000000	/* JTAG TDO->TDI data pin (ppc output) */
+#define CONFIG_SYS_FPGA_DONE		0x10000000	/* JTAG TDI->TDO pin (ppc input)       */
 
-#define JTAG_GPIO_ADDR_TMS	(CFG_MBAR + 0xB10)	/* JTAG TMS pin (GPS data out value reg.)      */
-#define JTAG_GPIO_ADDR_TCK	(CFG_MBAR + 0xC0C)	/* JTAG TCK pin (GPW data out value reg.)      */
-#define JTAG_GPIO_ADDR_TDI	(CFG_MBAR + 0xC0C)	/* JTAG TDO->TDI pin (GPW data out value reg.) */
-#define JTAG_GPIO_ADDR_TDO	(CFG_MBAR + 0xB14)	/* JTAG TDI->TDO pin (GPS data in value reg.)  */
+#define JTAG_GPIO_ADDR_TMS	(CONFIG_SYS_MBAR + 0xB10)	/* JTAG TMS pin (GPS data out value reg.)      */
+#define JTAG_GPIO_ADDR_TCK	(CONFIG_SYS_MBAR + 0xC0C)	/* JTAG TCK pin (GPW data out value reg.)      */
+#define JTAG_GPIO_ADDR_TDI	(CONFIG_SYS_MBAR + 0xC0C)	/* JTAG TDO->TDI pin (GPW data out value reg.) */
+#define JTAG_GPIO_ADDR_TDO	(CONFIG_SYS_MBAR + 0xB14)	/* JTAG TDI->TDO pin (GPS data in value reg.)  */
 
-#define JTAG_GPIO_ADDR_CFG	(CFG_MBAR + 0xB00)
+#define JTAG_GPIO_ADDR_CFG	(CONFIG_SYS_MBAR + 0xB00)
 #define JTAG_GPIO_CFG_SET	0x00000000
 #define JTAG_GPIO_CFG_RESET	0x00F00000
 
-#define JTAG_GPIO_ADDR_EN_TMS	(CFG_MBAR + 0xB04)
+#define JTAG_GPIO_ADDR_EN_TMS	(CONFIG_SYS_MBAR + 0xB04)
 #define JTAG_GPIO_TMS_EN_SET	0x20000000	/* Enable for GPIO */
 #define JTAG_GPIO_TMS_EN_RESET	0x00000000
-#define JTAG_GPIO_ADDR_DDR_TMS	(CFG_MBAR + 0xB0C)
+#define JTAG_GPIO_ADDR_DDR_TMS	(CONFIG_SYS_MBAR + 0xB0C)
 #define JTAG_GPIO_TMS_DDR_SET	0x20000000	/* Set as output   */
 #define JTAG_GPIO_TMS_DDR_RESET 0x00000000
 
-#define JTAG_GPIO_ADDR_EN_TCK	(CFG_MBAR + 0xC00)
+#define JTAG_GPIO_ADDR_EN_TCK	(CONFIG_SYS_MBAR + 0xC00)
 #define JTAG_GPIO_TCK_EN_SET	0x20000000	/* Enable for GPIO */
 #define JTAG_GPIO_TCK_EN_RESET	0x00000000
-#define JTAG_GPIO_ADDR_DDR_TCK	(CFG_MBAR + 0xC08)
+#define JTAG_GPIO_ADDR_DDR_TCK	(CONFIG_SYS_MBAR + 0xC08)
 #define JTAG_GPIO_TCK_DDR_SET	0x20000000	/* Set as output   */
 #define JTAG_GPIO_TCK_DDR_RESET 0x00000000
 
-#define JTAG_GPIO_ADDR_EN_TDI	(CFG_MBAR + 0xC00)
+#define JTAG_GPIO_ADDR_EN_TDI	(CONFIG_SYS_MBAR + 0xC00)
 #define JTAG_GPIO_TDI_EN_SET	0x10000000	/* Enable as GPIO  */
 #define JTAG_GPIO_TDI_EN_RESET	0x00000000
-#define JTAG_GPIO_ADDR_DDR_TDI	(CFG_MBAR + 0xC08)
+#define JTAG_GPIO_ADDR_DDR_TDI	(CONFIG_SYS_MBAR + 0xC08)
 #define JTAG_GPIO_TDI_DDR_SET	0x10000000	/* Set as output   */
 #define JTAG_GPIO_TDI_DDR_RESET 0x00000000
 
-#define JTAG_GPIO_ADDR_EN_TDO	(CFG_MBAR + 0xB04)
+#define JTAG_GPIO_ADDR_EN_TDO	(CONFIG_SYS_MBAR + 0xB04)
 #define JTAG_GPIO_TDO_EN_SET	0x10000000	/* Enable as GPIO  */
 #define JTAG_GPIO_TDO_EN_RESET	0x00000000
-#define JTAG_GPIO_ADDR_DDR_TDO	(CFG_MBAR + 0xB0C)
+#define JTAG_GPIO_ADDR_DDR_TDO	(CONFIG_SYS_MBAR + 0xB0C)
 #define JTAG_GPIO_TDO_DDR_SET	0x00000000
 #define JTAG_GPIO_TDO_DDR_RESET 0x10000000	/* Set as input	   */
 
diff --git a/include/configs/cradle.h b/include/configs/cradle.h
index eb93a8f08..e80504a09 100644
--- a/include/configs/cradle.h
+++ b/include/configs/cradle.h
@@ -40,8 +40,8 @@
 /*
  * Size of malloc() pool
  */
-#define CFG_MALLOC_LEN		(CFG_ENV_SIZE + 128*1024)
-#define CFG_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
+#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + 128*1024)
+#define CONFIG_SYS_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
 
 /*
  * Hardware drivers
@@ -89,25 +89,25 @@
 /*
  * Miscellaneous configurable options
  */
-#define CFG_LONGHELP                            /* undef to save memory         */
-#define CFG_PROMPT              "=> "   /* Monitor Command Prompt       */
-#define CFG_CBSIZE              256             /* Console I/O Buffer Size      */
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define CFG_MAXARGS             16              /* max number of command args   */
-#define CFG_BARGSIZE            CFG_CBSIZE      /* Boot Argument Buffer Size    */
+#define CONFIG_SYS_LONGHELP                            /* undef to save memory         */
+#define CONFIG_SYS_PROMPT              "=> "   /* Monitor Command Prompt       */
+#define CONFIG_SYS_CBSIZE              256             /* Console I/O Buffer Size      */
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS             16              /* max number of command args   */
+#define CONFIG_SYS_BARGSIZE            CONFIG_SYS_CBSIZE      /* Boot Argument Buffer Size    */
 
-#define CFG_MEMTEST_START       0xa0400000      /* memtest works on     */
-#define CFG_MEMTEST_END         0xa0800000      /* 4 ... 8 MB in DRAM   */
+#define CONFIG_SYS_MEMTEST_START       0xa0400000      /* memtest works on     */
+#define CONFIG_SYS_MEMTEST_END         0xa0800000      /* 4 ... 8 MB in DRAM   */
 
-#undef  CFG_CLKS_IN_HZ          /* everything, incl board info, in Hz */
+#undef  CONFIG_SYS_CLKS_IN_HZ          /* everything, incl board info, in Hz */
 
-#define CFG_LOAD_ADDR           0xa2000000      /* default load address */
+#define CONFIG_SYS_LOAD_ADDR           0xa2000000      /* default load address */
 
-#define CFG_HZ                  3686400         /* incrementer freq: 3.6864 MHz */
-#define CFG_CPUSPEED            0x141           /* set core clock to 200/200/100 MHz */
+#define CONFIG_SYS_HZ                  3686400         /* incrementer freq: 3.6864 MHz */
+#define CONFIG_SYS_CPUSPEED            0x141           /* set core clock to 200/200/100 MHz */
 
 						/* valid baudrates */
-#define CFG_BAUDRATE_TABLE      { 9600, 19200, 38400, 57600, 115200 }
+#define CONFIG_SYS_BAUDRATE_TABLE      { 9600, 19200, 38400, 57600, 115200 }
 
 /*
  * Stack sizes
@@ -137,24 +137,24 @@
 #define PHYS_FLASH_2            0x04000000 /* Flash Bank #1 */
 #define PHYS_FLASH_SIZE         0x02000000 /* 32 MB */
 
-#define CFG_DRAM_BASE           0xa0000000
-#define CFG_DRAM_SIZE           0x04000000
+#define CONFIG_SYS_DRAM_BASE           0xa0000000
+#define CONFIG_SYS_DRAM_SIZE           0x04000000
 
-#define CFG_FLASH_BASE          PHYS_FLASH_1
+#define CONFIG_SYS_FLASH_BASE          PHYS_FLASH_1
 
 /*
  * FLASH and environment organization
  */
-#define CFG_MAX_FLASH_BANKS     1     /* max number of memory banks           */
-#define CFG_MAX_FLASH_SECT      32    /* max number of sectors on one chip    */
+#define CONFIG_SYS_MAX_FLASH_BANKS     1     /* max number of memory banks           */
+#define CONFIG_SYS_MAX_FLASH_SECT      32    /* max number of sectors on one chip    */
 
 /* timeout values are in ticks */
-#define CFG_FLASH_ERASE_TOUT    (2*CFG_HZ) /* Timeout for Flash Erase */
-#define CFG_FLASH_WRITE_TOUT    (2*CFG_HZ) /* Timeout for Flash Write */
+#define CONFIG_SYS_FLASH_ERASE_TOUT    (2*CONFIG_SYS_HZ) /* Timeout for Flash Erase */
+#define CONFIG_SYS_FLASH_WRITE_TOUT    (2*CONFIG_SYS_HZ) /* Timeout for Flash Write */
 
-#define CFG_ENV_IS_IN_FLASH	1
-#define CFG_ENV_ADDR				0x00020000	/* absolute address for now   */
-#define CFG_ENV_SIZE				0x20000	   /* 8K ouch, this may later be */
+#define CONFIG_ENV_IS_IN_FLASH	1
+#define CONFIG_ENV_ADDR				0x00020000	/* absolute address for now   */
+#define CONFIG_ENV_SIZE				0x20000	   /* 8K ouch, this may later be */
 
 /******************************************************************************
  *
@@ -254,38 +254,38 @@
  */
 /* Pin direction control */
 /* NOTE GPIO 0, 61, 62 are set for inputs due to CPLD SPAREs */
-#define CFG_GPDR0_VAL       0xfff3bf02
-#define CFG_GPDR1_VAL       0xfbffbf83
-#define CFG_GPDR2_VAL       0x0001ffff
+#define CONFIG_SYS_GPDR0_VAL       0xfff3bf02
+#define CONFIG_SYS_GPDR1_VAL       0xfbffbf83
+#define CONFIG_SYS_GPDR2_VAL       0x0001ffff
 /* Set and Clear registers */
-#define CFG_GPSR0_VAL       0x00400800
-#define CFG_GPSR1_VAL       0x00000480
-#define CFG_GPSR2_VAL       0x00014000
-#define CFG_GPCR0_VAL       0x00000000
-#define CFG_GPCR1_VAL       0x00000000
-#define CFG_GPCR2_VAL       0x00000000
+#define CONFIG_SYS_GPSR0_VAL       0x00400800
+#define CONFIG_SYS_GPSR1_VAL       0x00000480
+#define CONFIG_SYS_GPSR2_VAL       0x00014000
+#define CONFIG_SYS_GPCR0_VAL       0x00000000
+#define CONFIG_SYS_GPCR1_VAL       0x00000000
+#define CONFIG_SYS_GPCR2_VAL       0x00000000
 /* Edge detect registers (these are set by the kernel) */
-#define CFG_GRER0_VAL       0x00000000
-#define CFG_GRER1_VAL       0x00000000
-#define CFG_GRER2_VAL       0x00000000
-#define CFG_GFER0_VAL       0x00000000
-#define CFG_GFER1_VAL       0x00000000
-#define CFG_GFER2_VAL       0x00000000
+#define CONFIG_SYS_GRER0_VAL       0x00000000
+#define CONFIG_SYS_GRER1_VAL       0x00000000
+#define CONFIG_SYS_GRER2_VAL       0x00000000
+#define CONFIG_SYS_GFER0_VAL       0x00000000
+#define CONFIG_SYS_GFER1_VAL       0x00000000
+#define CONFIG_SYS_GFER2_VAL       0x00000000
 /* Alternate function registers */
-#define CFG_GAFR0_L_VAL     0x00000000
-#define CFG_GAFR0_U_VAL     0x00000010
-#define CFG_GAFR1_L_VAL     0x900a9550
-#define CFG_GAFR1_U_VAL     0x00000008
-#define CFG_GAFR2_L_VAL     0x20000000
-#define CFG_GAFR2_U_VAL     0x00000002
+#define CONFIG_SYS_GAFR0_L_VAL     0x00000000
+#define CONFIG_SYS_GAFR0_U_VAL     0x00000010
+#define CONFIG_SYS_GAFR1_L_VAL     0x900a9550
+#define CONFIG_SYS_GAFR1_U_VAL     0x00000008
+#define CONFIG_SYS_GAFR2_L_VAL     0x20000000
+#define CONFIG_SYS_GAFR2_U_VAL     0x00000002
 
 /*
  * Clocks, power control and interrupts
  */
-#define CFG_PSSR_VAL        0x00000020
-#define CFG_CCCR_VAL        0x00000141  /* 100 MHz memory, 200 MHz CPU  */
-#define CFG_CKEN_VAL        0x00000060  /* FFUART and STUART enabled    */
-#define CFG_ICMR_VAL        0x00000000  /* No interrupts enabled        */
+#define CONFIG_SYS_PSSR_VAL        0x00000020
+#define CONFIG_SYS_CCCR_VAL        0x00000141  /* 100 MHz memory, 200 MHz CPU  */
+#define CONFIG_SYS_CKEN_VAL        0x00000060  /* FFUART and STUART enabled    */
+#define CONFIG_SYS_ICMR_VAL        0x00000000  /* No interrupts enabled        */
 
 /* FIXME
  *
@@ -300,30 +300,30 @@
  * FIXME Can ethernet be burst read and/or write?? This is set for lubbock
  *       Verify timings on all
  */
-#define CFG_MSC0_VAL        0x000023FA  /* flash bank    (cs0)   */
-/*#define CFG_MSC1_VAL        0x00003549  / * SuperIO bank  (cs2)   */
-#define CFG_MSC1_VAL        0x0000354c  /* SuperIO bank  (cs2)   */
-#define CFG_MSC2_VAL        0x00001224  /* Ethernet bank (cs4)   */
+#define CONFIG_SYS_MSC0_VAL        0x000023FA  /* flash bank    (cs0)   */
+/*#define CONFIG_SYS_MSC1_VAL        0x00003549  / * SuperIO bank  (cs2)   */
+#define CONFIG_SYS_MSC1_VAL        0x0000354c  /* SuperIO bank  (cs2)   */
+#define CONFIG_SYS_MSC2_VAL        0x00001224  /* Ethernet bank (cs4)   */
 #ifdef REDBOOT_WAY
-#define CFG_MDCNFG_VAL      0x00001aa1  /* FIXME can DTC be 01?     */
-#define CFG_MDMRS_VAL       0x00000000
-#define CFG_MDREFR_VAL      0x00018018
+#define CONFIG_SYS_MDCNFG_VAL      0x00001aa1  /* FIXME can DTC be 01?     */
+#define CONFIG_SYS_MDMRS_VAL       0x00000000
+#define CONFIG_SYS_MDREFR_VAL      0x00018018
 #else
-#define CFG_MDCNFG_VAL      0x00001aa1  /* FIXME can DTC be 01?     */
-#define CFG_MDMRS_VAL       0x00000000
-#define CFG_MDREFR_VAL      0x00403018  /* Initial setting, individual bits set in lowlevel_init.S */
+#define CONFIG_SYS_MDCNFG_VAL      0x00001aa1  /* FIXME can DTC be 01?     */
+#define CONFIG_SYS_MDMRS_VAL       0x00000000
+#define CONFIG_SYS_MDREFR_VAL      0x00403018  /* Initial setting, individual bits set in lowlevel_init.S */
 #endif
 
 /*
  * PCMCIA and CF Interfaces (NOT USED, these values from lubbock init)
  */
-#define CFG_MECR_VAL          0x00000000
-#define CFG_MCMEM0_VAL        0x00010504
-#define CFG_MCMEM1_VAL        0x00010504
-#define CFG_MCATT0_VAL        0x00010504
-#define CFG_MCATT1_VAL        0x00010504
-#define CFG_MCIO0_VAL         0x00004715
-#define CFG_MCIO1_VAL         0x00004715
+#define CONFIG_SYS_MECR_VAL          0x00000000
+#define CONFIG_SYS_MCMEM0_VAL        0x00010504
+#define CONFIG_SYS_MCMEM1_VAL        0x00010504
+#define CONFIG_SYS_MCATT0_VAL        0x00010504
+#define CONFIG_SYS_MCATT1_VAL        0x00010504
+#define CONFIG_SYS_MCIO0_VAL         0x00004715
+#define CONFIG_SYS_MCIO1_VAL         0x00004715
 
 /* Board specific defines */
 
diff --git a/include/configs/csb226.h b/include/configs/csb226.h
index a807d0084..a24e34a50 100644
--- a/include/configs/csb226.h
+++ b/include/configs/csb226.h
@@ -111,38 +111,38 @@
  * used for the RAM copy of the uboot code
  *
  */
-#define CFG_MALLOC_LEN		(128*1024)
-#define CFG_GBL_DATA_SIZE	128		/* size in bytes reserved for initial data */
+#define CONFIG_SYS_MALLOC_LEN		(128*1024)
+#define CONFIG_SYS_GBL_DATA_SIZE	128		/* size in bytes reserved for initial data */
 
-#define CFG_LONGHELP				/* undef to save memory         */
-#define CFG_PROMPT		"uboot> "	/* Monitor Command Prompt       */
-#define CFG_CBSIZE		128		/* Console I/O Buffer Size      */
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define CFG_MAXARGS		16		/* max number of command args   */
-#define CFG_BARGSIZE		CFG_CBSIZE	/* Boot Argument Buffer Size    */
+#define CONFIG_SYS_LONGHELP				/* undef to save memory         */
+#define CONFIG_SYS_PROMPT		"uboot> "	/* Monitor Command Prompt       */
+#define CONFIG_SYS_CBSIZE		128		/* Console I/O Buffer Size      */
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS		16		/* max number of command args   */
+#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size    */
 
-#define CFG_MEMTEST_START	0xa0400000      /* memtest works on     */
-#define CFG_MEMTEST_END         0xa0800000      /* 4 ... 8 MB in DRAM   */
+#define CONFIG_SYS_MEMTEST_START	0xa0400000      /* memtest works on     */
+#define CONFIG_SYS_MEMTEST_END         0xa0800000      /* 4 ... 8 MB in DRAM   */
 
-#undef  CFG_CLKS_IN_HZ          /* everything, incl board info, in Hz */
+#undef  CONFIG_SYS_CLKS_IN_HZ          /* everything, incl board info, in Hz */
 
-#define CFG_LOAD_ADDR           0xa3000000	/* default load address */
+#define CONFIG_SYS_LOAD_ADDR           0xa3000000	/* default load address */
 						/* RS: where is this documented? */
 						/* RS: is this where U-Boot is  */
 						/* RS: relocated to in RAM?      */
 
-#define CFG_HZ                  3686400         /* incrementer freq: 3.6864 MHz */
+#define CONFIG_SYS_HZ                  3686400         /* incrementer freq: 3.6864 MHz */
 						/* RS: the oscillator is actually 3680130?? */
-#define CFG_CPUSPEED            0x141           /* set core clock to 200/200/100 MHz */
+#define CONFIG_SYS_CPUSPEED            0x141           /* set core clock to 200/200/100 MHz */
 						/* 0101000001 */
 						/*      ^^^^^ Memory Speed 99.53 MHz         */
 						/*    ^^      Run Mode Speed = 2x Mem Speed  */
 						/* ^^         Turbo Mode Sp. = 1x Run M. Sp. */
 
-#define CFG_MONITOR_LEN		0x20000		/* 128 KiB */
+#define CONFIG_SYS_MONITOR_LEN		0x20000		/* 128 KiB */
 
 						/* valid baudrates */
-#define CFG_BAUDRATE_TABLE      { 9600, 19200, 38400, 57600, 115200 }
+#define CONFIG_SYS_BAUDRATE_TABLE      { 9600, 19200, 38400, 57600, 115200 }
 
 /*
  * Network chip
@@ -172,10 +172,10 @@
 #define PHYS_FLASH_1		0x00000000	/* Flash Bank #1            */
 #define PHYS_FLASH_SIZE		0x02000000	/* 32 MB                    */
 
-#define CFG_DRAM_BASE		0xa0000000	/* RAM starts here          */
-#define CFG_DRAM_SIZE		0x02000000
+#define CONFIG_SYS_DRAM_BASE		0xa0000000	/* RAM starts here          */
+#define CONFIG_SYS_DRAM_SIZE		0x02000000
 
-#define CFG_FLASH_BASE          PHYS_FLASH_1
+#define CONFIG_SYS_FLASH_BASE          PHYS_FLASH_1
 
 # if 0
 /* FIXME: switch to _documented_ registers */
@@ -196,9 +196,9 @@
  * GP79 == nCS3      is 1
  * GP80 == nCS4      is 1
  */
-#define CFG_GPSR0_VAL       0x03008000
-#define CFG_GPSR1_VAL       0xC0028282
-#define CFG_GPSR2_VAL       0x0001C000
+#define CONFIG_SYS_GPSR0_VAL       0x03008000
+#define CONFIG_SYS_GPSR1_VAL       0xC0028282
+#define CONFIG_SYS_GPSR2_VAL       0x0001C000
 
 /* GP02 == DON_RST   is 0
  * GP23 == SCLK      is 0
@@ -207,9 +207,9 @@
  * GP61 == LED_A     is 0
  * GP73 == SWUPD_LED is 0
  */
-#define CFG_GPCR0_VAL       0x00800004
-#define CFG_GPCR1_VAL       0x30002000
-#define CFG_GPCR2_VAL       0x00000100
+#define CONFIG_SYS_GPCR0_VAL       0x00800004
+#define CONFIG_SYS_GPCR1_VAL       0x30002000
+#define CONFIG_SYS_GPCR2_VAL       0x00000100
 
 /* GP00 == DON_READY is input
  * GP01 == DON_OK    is input
@@ -254,9 +254,9 @@
  * GP79 == nCS3      is output
  * GP80 == nCS4      is output
  */
-#define CFG_GPDR0_VAL       0x03808004
-#define CFG_GPDR1_VAL       0xF002A282
-#define CFG_GPDR2_VAL       0x0001C200
+#define CONFIG_SYS_GPDR0_VAL       0x03808004
+#define CONFIG_SYS_GPDR1_VAL       0xF002A282
+#define CONFIG_SYS_GPDR2_VAL       0x0001C200
 
 /* GP15 == nCS1  is AF10
  * GP18 == RDY   is AF01
@@ -276,12 +276,12 @@
  * GP79 == nCS3  is AF10
  * GP80 == nCS4  is AF10
  */
-#define CFG_GAFR0_L_VAL     0x80000000
-#define CFG_GAFR0_U_VAL     0x001A8010
-#define CFG_GAFR1_L_VAL     0x60088058
-#define CFG_GAFR1_U_VAL     0x00000008
-#define CFG_GAFR2_L_VAL     0xA0000000
-#define CFG_GAFR2_U_VAL     0x00000002
+#define CONFIG_SYS_GAFR0_L_VAL     0x80000000
+#define CONFIG_SYS_GAFR0_U_VAL     0x001A8010
+#define CONFIG_SYS_GAFR1_L_VAL     0x60088058
+#define CONFIG_SYS_GAFR1_U_VAL     0x00000008
+#define CONFIG_SYS_GAFR2_L_VAL     0xA0000000
+#define CONFIG_SYS_GAFR2_U_VAL     0x00000002
 
 
 /* FIXME: set GPIO_RER/FER */
@@ -292,7 +292,7 @@
  * BFS = 1
  * SSS = 1
  */
-#define CFG_PSSR_VAL		0x37
+#define CONFIG_SYS_PSSR_VAL		0x37
 
 /*
  * Memory settings
@@ -313,7 +313,7 @@
  * [03]    1    - 16 Bit bus width
  * [02:00] 000  - nonburst RAM or FLASH
  */
-#define CFG_MSC0_VAL		0x25b825b8 /* flash banks                   */
+#define CONFIG_SYS_MSC0_VAL		0x25b825b8 /* flash banks                   */
 
 /* This is the configuration for nCS2/3 -> TDM-Switch, DSP
  * configuration for nCS3: DSP
@@ -331,7 +331,7 @@
  * [03]    1    - 16 Bit bus width
  * [02:00] 100  - variable latency I/O
  */
-#define CFG_MSC1_VAL		0x123C593C /* TDM switch, DSP               */
+#define CONFIG_SYS_MSC1_VAL		0x123C593C /* TDM switch, DSP               */
 
 /* This is the configuration for nCS4/5 -> ExtBus, LAN Controller
  *
@@ -350,7 +350,7 @@
  * [03]    1    - 16 Bit bus width
  * [02:00] 100  - variable latency I/O
  */
-#define CFG_MSC2_VAL		0x123C6CDC /* extra bus, LAN controller     */
+#define CONFIG_SYS_MSC2_VAL		0x123C6CDC /* extra bus, LAN controller     */
 
 /* MDCNFG: SDRAM Configuration Register
  *
@@ -378,7 +378,7 @@
  * [00]      1   - enable  SDRAM partition 0
  */
 /* use the configuration above but disable partition 0 */
-#define CFG_MDCNFG_VAL		0x000019c8
+#define CONFIG_SYS_MDCNFG_VAL		0x000019c8
 
 /* MDREFR: SDRAM Refresh Control Register
  *
@@ -399,7 +399,7 @@
  * [12]    1     - E0PIN: disable SDCKE0
  * [11:00] 000000011000 - (64ms/8192)*MemClkFreq/32 = 24
  */
-#define CFG_MDREFR_VAL		0x0081D018
+#define CONFIG_SYS_MDREFR_VAL		0x0081D018
 
 /* MDMRS: Mode Register Set Configuration Register
  *
@@ -414,64 +414,64 @@
  * [03]      0       - MDADD0: SDRAM0/1 burst Type. Fixed to sequential.
  * [02:00]   010     - MDBL0:  SDRAM0/1 burst Length. Fixed to 4.
  */
-#define CFG_MDMRS_VAL		0x00020022
+#define CONFIG_SYS_MDMRS_VAL		0x00020022
 
 /*
  * PCMCIA and CF Interfaces
  */
-#define CFG_MECR_VAL		0x00000000
-#define CFG_MCMEM0_VAL		0x00000000
-#define CFG_MCMEM1_VAL		0x00000000
-#define CFG_MCATT0_VAL		0x00000000
-#define CFG_MCATT1_VAL		0x00000000
-#define CFG_MCIO0_VAL		0x00000000
-#define CFG_MCIO1_VAL		0x00000000
+#define CONFIG_SYS_MECR_VAL		0x00000000
+#define CONFIG_SYS_MCMEM0_VAL		0x00000000
+#define CONFIG_SYS_MCMEM1_VAL		0x00000000
+#define CONFIG_SYS_MCATT0_VAL		0x00000000
+#define CONFIG_SYS_MCATT1_VAL		0x00000000
+#define CONFIG_SYS_MCIO0_VAL		0x00000000
+#define CONFIG_SYS_MCIO1_VAL		0x00000000
 #endif
 
 /*
  * GPIO settings
  */
-#define CFG_GPSR0_VAL		0xFFFFFFFF
-#define CFG_GPSR1_VAL		0xFFFFFFFF
-#define CFG_GPSR2_VAL		0xFFFFFFFF
-#define CFG_GPCR0_VAL		0x08022080
-#define CFG_GPCR1_VAL		0x00000000
-#define CFG_GPCR2_VAL		0x00000000
-#define CFG_GPDR0_VAL		0xCD82A878
-#define CFG_GPDR1_VAL		0xFCFFAB80
-#define CFG_GPDR2_VAL		0x0001FFFF
-#define CFG_GAFR0_L_VAL		0x80000000
-#define CFG_GAFR0_U_VAL		0xA5254010
-#define CFG_GAFR1_L_VAL		0x599A9550
-#define CFG_GAFR1_U_VAL		0xAAA5AAAA
-#define CFG_GAFR2_L_VAL		0xAAAAAAAA
-#define CFG_GAFR2_U_VAL		0x00000002
+#define CONFIG_SYS_GPSR0_VAL		0xFFFFFFFF
+#define CONFIG_SYS_GPSR1_VAL		0xFFFFFFFF
+#define CONFIG_SYS_GPSR2_VAL		0xFFFFFFFF
+#define CONFIG_SYS_GPCR0_VAL		0x08022080
+#define CONFIG_SYS_GPCR1_VAL		0x00000000
+#define CONFIG_SYS_GPCR2_VAL		0x00000000
+#define CONFIG_SYS_GPDR0_VAL		0xCD82A878
+#define CONFIG_SYS_GPDR1_VAL		0xFCFFAB80
+#define CONFIG_SYS_GPDR2_VAL		0x0001FFFF
+#define CONFIG_SYS_GAFR0_L_VAL		0x80000000
+#define CONFIG_SYS_GAFR0_U_VAL		0xA5254010
+#define CONFIG_SYS_GAFR1_L_VAL		0x599A9550
+#define CONFIG_SYS_GAFR1_U_VAL		0xAAA5AAAA
+#define CONFIG_SYS_GAFR2_L_VAL		0xAAAAAAAA
+#define CONFIG_SYS_GAFR2_U_VAL		0x00000002
 
 /* FIXME: set GPIO_RER/FER */
 
-#define CFG_PSSR_VAL        0x20
+#define CONFIG_SYS_PSSR_VAL        0x20
 
 /*
  * Memory settings
  */
 
-#define CFG_MSC0_VAL            0x2ef15af0
-#define CFG_MSC1_VAL            0x00003ff4
-#define CFG_MSC2_VAL            0x7ff07ff0
-#define CFG_MDCNFG_VAL          0x09a909a9
-#define CFG_MDREFR_VAL          0x038ff030
-#define CFG_MDMRS_VAL           0x00220022
+#define CONFIG_SYS_MSC0_VAL            0x2ef15af0
+#define CONFIG_SYS_MSC1_VAL            0x00003ff4
+#define CONFIG_SYS_MSC2_VAL            0x7ff07ff0
+#define CONFIG_SYS_MDCNFG_VAL          0x09a909a9
+#define CONFIG_SYS_MDREFR_VAL          0x038ff030
+#define CONFIG_SYS_MDMRS_VAL           0x00220022
 
 /*
  * PCMCIA and CF Interfaces
  */
-#define CFG_MECR_VAL        0x00000000
-#define CFG_MCMEM0_VAL      0x00000000
-#define CFG_MCMEM1_VAL      0x00000000
-#define CFG_MCATT0_VAL      0x00000000
-#define CFG_MCATT1_VAL      0x00000000
-#define CFG_MCIO0_VAL       0x00000000
-#define CFG_MCIO1_VAL       0x00000000
+#define CONFIG_SYS_MECR_VAL        0x00000000
+#define CONFIG_SYS_MCMEM0_VAL      0x00000000
+#define CONFIG_SYS_MCMEM1_VAL      0x00000000
+#define CONFIG_SYS_MCATT0_VAL      0x00000000
+#define CONFIG_SYS_MCATT1_VAL      0x00000000
+#define CONFIG_SYS_MCIO0_VAL       0x00000000
+#define CONFIG_SYS_MCIO1_VAL       0x00000000
 
 #define CSB226_USER_LED0	0x00000008
 #define CSB226_USER_LED1	0x00000010
@@ -481,16 +481,16 @@
 /*
  * FLASH and environment organization
  */
-#define CFG_MAX_FLASH_BANKS     1	/* max number of memory banks       */
-#define CFG_MAX_FLASH_SECT	128	/* max number of sect. on one chip  */
+#define CONFIG_SYS_MAX_FLASH_BANKS     1	/* max number of memory banks       */
+#define CONFIG_SYS_MAX_FLASH_SECT	128	/* max number of sect. on one chip  */
 
 /* timeout values are in ticks */
-#define CFG_FLASH_ERASE_TOUT    (2*CFG_HZ) /* Timeout for Flash Erase       */
-#define CFG_FLASH_WRITE_TOUT    (2*CFG_HZ) /* Timeout for Flash Write       */
+#define CONFIG_SYS_FLASH_ERASE_TOUT    (2*CONFIG_SYS_HZ) /* Timeout for Flash Erase       */
+#define CONFIG_SYS_FLASH_WRITE_TOUT    (2*CONFIG_SYS_HZ) /* Timeout for Flash Write       */
 
-#define	CFG_ENV_IS_IN_FLASH	1
-#define CFG_ENV_ADDR            (PHYS_FLASH_1 + 0x1C000)
+#define	CONFIG_ENV_IS_IN_FLASH	1
+#define CONFIG_ENV_ADDR            (PHYS_FLASH_1 + 0x1C000)
 					/* Addr of Environment Sector       */
-#define CFG_ENV_SIZE            0x4000  /* Total Size of Environment Sector */
+#define CONFIG_ENV_SIZE            0x4000  /* Total Size of Environment Sector */
 
 #endif  /* __CONFIG_H */
diff --git a/include/configs/csb272.h b/include/configs/csb272.h
index 5145c0042..874f2c0b3 100644
--- a/include/configs/csb272.h
+++ b/include/configs/csb272.h
@@ -105,7 +105,7 @@
  *
  */
 #define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
-#define CFG_LOADS_BAUD_CHANGE	1	/* allow baudrate change	*/
+#define CONFIG_SYS_LOADS_BAUD_CHANGE	1	/* allow baudrate change	*/
 
 /*
  * KGDB Configuration
@@ -120,36 +120,36 @@
  * Miscellaneous configurable options
  *
  */
-#undef	CFG_HUSH_PARSER			/* use "hush" command parser */
-#ifdef	CFG_HUSH_PARSER
-#define	CFG_PROMPT_HUSH_PS2	"> "	/* hush shell secondary prompt */
+#undef	CONFIG_SYS_HUSH_PARSER			/* use "hush" command parser */
+#ifdef	CONFIG_SYS_HUSH_PARSER
+#define	CONFIG_SYS_PROMPT_HUSH_PS2	"> "	/* hush shell secondary prompt */
 #endif
 
-#define CFG_LONGHELP			/* undef to save memory	*/
-#define CFG_PROMPT		"=> "	/* Monitor Command Prompt */
+#define CONFIG_SYS_LONGHELP			/* undef to save memory	*/
+#define CONFIG_SYS_PROMPT		"=> "	/* Monitor Command Prompt */
 #if defined(CONFIG_CMD_KGDB)
-#define	CFG_CBSIZE		1024	/* Console I/O Buffer Size */
+#define	CONFIG_SYS_CBSIZE		1024	/* Console I/O Buffer Size */
 #else
-#define	CFG_CBSIZE		256	/* Console I/O Buffer Size */
+#define	CONFIG_SYS_CBSIZE		256	/* Console I/O Buffer Size */
 #endif
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define CFG_MAXARGS		16	/* max number of command args */
-#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size */
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS		16	/* max number of command args */
+#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size */
 
-#define CFG_MEMTEST_START	0x0400000 /* memtest works on */
-#define CFG_MEMTEST_END		0x0C00000 /* 4 ... 12 MB in DRAM */
+#define CONFIG_SYS_MEMTEST_START	0x0400000 /* memtest works on */
+#define CONFIG_SYS_MEMTEST_END		0x0C00000 /* 4 ... 12 MB in DRAM */
 
-#define	CFG_HZ			1000	/* decrementer freq: 1 ms ticks	*/
-#define CFG_CLKS_IN_HZ		1	/* everything, incl board info, in Hz */
-#define CFG_EXTBDINFO		1	/* To use extended board_info (bd_t) */
-#define CFG_LOAD_ADDR		0x100000 /* default load address */
+#define	CONFIG_SYS_HZ			1000	/* decrementer freq: 1 ms ticks	*/
+#define CONFIG_SYS_CLKS_IN_HZ		1	/* everything, incl board info, in Hz */
+#define CONFIG_SYS_EXTBDINFO		1	/* To use extended board_info (bd_t) */
+#define CONFIG_SYS_LOAD_ADDR		0x100000 /* default load address */
 
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define CFG_BOOTMAPSZ		(8 << 20) /* Initial Memory map for Linux */
+#define CONFIG_SYS_BOOTMAPSZ		(8 << 20) /* Initial Memory map for Linux */
 
 /*
  * watchdog configuration
@@ -161,11 +161,11 @@
  * UART configuration
  *
  */
-#define CFG_EXT_SERIAL_CLOCK	3868400	/* use external serial clock */
-#undef  CFG_IGNORE_405_UART_ERRATA_59	/* ignore ppc405gp errata #59 */
-#undef  CFG_BASE_BAUD
+#define CONFIG_SYS_EXT_SERIAL_CLOCK	3868400	/* use external serial clock */
+#undef  CONFIG_SYS_IGNORE_405_UART_ERRATA_59	/* ignore ppc405gp errata #59 */
+#undef  CONFIG_SYS_BASE_BAUD
 #define CONFIG_BAUDRATE		38400	/* Default baud rate */
-#define CFG_BAUDRATE_TABLE      \
+#define CONFIG_SYS_BAUDRATE_TABLE      \
     { 300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400 }
 
 /*
@@ -173,13 +173,14 @@
  *
  */
 #define CONFIG_HARD_I2C		1	/* I2C with hardware support	*/
-#define CFG_I2C_SPEED		100000	/* I2C speed			*/
-#define CFG_I2C_SLAVE		0x7F	/* I2C slave address		*/
+#define CONFIG_SYS_I2C_SPEED		100000	/* I2C speed			*/
+#define CONFIG_SYS_I2C_SLAVE		0x7F	/* I2C slave address		*/
 
 /*
  * MII PHY configuration
  *
  */
+#define CONFIG_PPC4xx_EMAC
 #define CONFIG_MII		1	/* MII PHY management		*/
 #define CONFIG_PHY_ADDR		0	/* PHY address			*/
 #define CONFIG_PHY_CMD_DELAY	40	/* PHY COMMAND delay		*/
@@ -209,14 +210,14 @@
 #undef  CONFIG_PCI_SCAN_SHOW            /* print pci devices @ startup  */
 #define CONFIG_PCI_BOOTDELAY    0       /* enable pci bootdelay variable*/
 
-#define CFG_PCI_SUBSYS_VENDORID 0x0000  /* PCI Vendor ID: to-do!!!      */
-#define CFG_PCI_SUBSYS_DEVICEID 0x0000  /* PCI Device ID: to-do!!!      */
-#define CFG_PCI_PTM1LA  0x00000000      /* point to sdram               */
-#define CFG_PCI_PTM1MS  0x80000001      /* 2GB, enable hard-wired to 1  */
-#define CFG_PCI_PTM1PCI 0x00000000      /* Host: use this pci address   */
-#define CFG_PCI_PTM2LA  0x00000000      /* disabled                     */
-#define CFG_PCI_PTM2MS  0x00000000      /* disabled                     */
-#define CFG_PCI_PTM2PCI 0x04000000      /* Host: use this pci address   */
+#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x0000  /* PCI Vendor ID: to-do!!!      */
+#define CONFIG_SYS_PCI_SUBSYS_DEVICEID 0x0000  /* PCI Device ID: to-do!!!      */
+#define CONFIG_SYS_PCI_PTM1LA  0x00000000      /* point to sdram               */
+#define CONFIG_SYS_PCI_PTM1MS  0x80000001      /* 2GB, enable hard-wired to 1  */
+#define CONFIG_SYS_PCI_PTM1PCI 0x00000000      /* Host: use this pci address   */
+#define CONFIG_SYS_PCI_PTM2LA  0x00000000      /* disabled                     */
+#define CONFIG_SYS_PCI_PTM2MS  0x00000000      /* disabled                     */
+#define CONFIG_SYS_PCI_PTM2PCI 0x04000000      /* Host: use this pci address   */
 
 /*
  * IDE stuff
@@ -230,70 +231,70 @@
  * Environment configuration
  *
  */
-#define CFG_ENV_IS_IN_FLASH	1	/* environment is in FLASH	*/
-#undef CFG_ENV_IS_IN_NVRAM
-#undef CFG_ENV_IS_IN_EEPROM
+#define CONFIG_ENV_IS_IN_FLASH	1	/* environment is in FLASH	*/
+#undef CONFIG_ENV_IS_IN_NVRAM
+#undef CONFIG_ENV_IS_IN_EEPROM
 
 /*
  * General Memory organization
  *
  * Start addresses for the final memory configuration
  * (Set up by the startup code)
- * Please note that CFG_SDRAM_BASE _must_ start at 0
+ * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
  */
-#define CFG_SDRAM_BASE		0x00000000
-#define CFG_FLASH_BASE		0xFE000000
-#define CFG_FLASH_SIZE		0x02000000
-#define CFG_MONITOR_BASE	TEXT_BASE
-#define CFG_MONITOR_LEN		(256 * 1024) /* Reserve 256 KB for Monitor */
-#define CFG_MALLOC_LEN		(128 * 1024) /* Reserve 128 KB for malloc() */
-
-#if CFG_MONITOR_BASE < CFG_FLASH_BASE
-#define CFG_RAMSTART
+#define CONFIG_SYS_SDRAM_BASE		0x00000000
+#define CONFIG_SYS_FLASH_BASE		0xFE000000
+#define CONFIG_SYS_FLASH_SIZE		0x02000000
+#define CONFIG_SYS_MONITOR_BASE	TEXT_BASE
+#define CONFIG_SYS_MONITOR_LEN		(256 * 1024) /* Reserve 256 KB for Monitor */
+#define CONFIG_SYS_MALLOC_LEN		(128 * 1024) /* Reserve 128 KB for malloc() */
+
+#if CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE
+#define CONFIG_SYS_RAMSTART
 #endif
 
-#if defined(CFG_ENV_IS_IN_FLASH)
-#define CFG_ENV_IN_OWN_SECTOR	1	   /* Give Environment own sector */
-#define CFG_ENV_ADDR		0xFFF00000 /* Address of Environment Sector */
-#define	CFG_ENV_SIZE		0x00001000 /* Size of Environment */
-#define CFG_ENV_SECT_SIZE	0x00040000 /* Size of Environment Sector */
+#if defined(CONFIG_ENV_IS_IN_FLASH)
+#define CONFIG_ENV_IN_OWN_SECTOR	1	   /* Give Environment own sector */
+#define CONFIG_ENV_ADDR		0xFFF00000 /* Address of Environment Sector */
+#define	CONFIG_ENV_SIZE		0x00001000 /* Size of Environment */
+#define CONFIG_ENV_SECT_SIZE	0x00040000 /* Size of Environment Sector */
 #endif
 
 /*
  * FLASH Device configuration
  *
  */
-#define CFG_FLASH_CFI		1	/* flash is CFI conformant	*/
+#define CONFIG_SYS_FLASH_CFI		1	/* flash is CFI conformant	*/
 #define CONFIG_FLASH_CFI_DRIVER	1	/* use common cfi driver	*/
-#define CFG_FLASH_USE_BUFFER_WRITE 1	/* use buffered writes (20x faster) */
-#define CFG_MAX_FLASH_BANKS	1	/* max # of memory banks	*/
-#define CFG_FLASH_INCREMENT	0	/* there is only one bank	*/
-#define CFG_MAX_FLASH_SECT	128	/* max # of sectors on one chip	*/
-#define CFG_FLASH_PROTECTION	1	/* hardware flash protection	*/
-#define CFG_FLASH_BANKS_LIST	{ CFG_FLASH_BASE }
+#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1	/* use buffered writes (20x faster) */
+#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max # of memory banks	*/
+#define CONFIG_SYS_FLASH_INCREMENT	0	/* there is only one bank	*/
+#define CONFIG_SYS_MAX_FLASH_SECT	128	/* max # of sectors on one chip	*/
+#define CONFIG_SYS_FLASH_PROTECTION	1	/* hardware flash protection	*/
+#define CONFIG_SYS_FLASH_BANKS_LIST	{ CONFIG_SYS_FLASH_BASE }
 
 /*
  * On Chip Memory location/size
  *
  */
-#define CFG_OCM_DATA_ADDR	0xF8000000
-#define CFG_OCM_DATA_SIZE	0x1000
+#define CONFIG_SYS_OCM_DATA_ADDR	0xF8000000
+#define CONFIG_SYS_OCM_DATA_SIZE	0x1000
 
 /*
  * Global info and initial stack
  *
  */
-#define CFG_INIT_RAM_ADDR	CFG_OCM_DATA_ADDR /* inside of on-chip SRAM */
-#define CFG_INIT_RAM_END	CFG_OCM_DATA_SIZE /* End of used area in RAM */
-#define CFG_GBL_DATA_SIZE	128 /* byte size reserved for initial data */
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_OCM_DATA_ADDR /* inside of on-chip SRAM */
+#define CONFIG_SYS_INIT_RAM_END	CONFIG_SYS_OCM_DATA_SIZE /* End of used area in RAM */
+#define CONFIG_SYS_GBL_DATA_SIZE	128 /* byte size reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
 /*
  * Miscellaneous board specific definitions
  *
  */
-#define CFG_I2C_PLL_ADDR	0x58	/* I2C address of AMIS FS6377-01 PLL */
+#define CONFIG_SYS_I2C_PLL_ADDR	0x58	/* I2C address of AMIS FS6377-01 PLL */
 #define CONFIG_I2CFAST		1	/* enable "i2cfast" env. setting     */
 
 /*
diff --git a/include/configs/csb472.h b/include/configs/csb472.h
index d3e5ea86b..2e30e6964 100644
--- a/include/configs/csb472.h
+++ b/include/configs/csb472.h
@@ -104,7 +104,7 @@
  *
  */
 #define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
-#define CFG_LOADS_BAUD_CHANGE	1	/* allow baudrate change	*/
+#define CONFIG_SYS_LOADS_BAUD_CHANGE	1	/* allow baudrate change	*/
 
 /*
  * KGDB Configuration
@@ -119,36 +119,36 @@
  * Miscellaneous configurable options
  *
  */
-#undef	CFG_HUSH_PARSER			/* use "hush" command parser */
-#ifdef	CFG_HUSH_PARSER
-#define	CFG_PROMPT_HUSH_PS2	"> "	/* hush shell secondary prompt */
+#undef	CONFIG_SYS_HUSH_PARSER			/* use "hush" command parser */
+#ifdef	CONFIG_SYS_HUSH_PARSER
+#define	CONFIG_SYS_PROMPT_HUSH_PS2	"> "	/* hush shell secondary prompt */
 #endif
 
-#define CFG_LONGHELP			/* undef to save memory	*/
-#define CFG_PROMPT		"=> "	/* Monitor Command Prompt */
+#define CONFIG_SYS_LONGHELP			/* undef to save memory	*/
+#define CONFIG_SYS_PROMPT		"=> "	/* Monitor Command Prompt */
 #if defined(CONFIG_CMD_KGDB)
-#define	CFG_CBSIZE		1024	/* Console I/O Buffer Size */
+#define	CONFIG_SYS_CBSIZE		1024	/* Console I/O Buffer Size */
 #else
-#define	CFG_CBSIZE		256	/* Console I/O Buffer Size */
+#define	CONFIG_SYS_CBSIZE		256	/* Console I/O Buffer Size */
 #endif
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define CFG_MAXARGS		16	/* max number of command args */
-#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size */
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS		16	/* max number of command args */
+#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size */
 
-#define CFG_MEMTEST_START	0x0400000 /* memtest works on */
-#define CFG_MEMTEST_END		0x0C00000 /* 4 ... 12 MB in DRAM */
+#define CONFIG_SYS_MEMTEST_START	0x0400000 /* memtest works on */
+#define CONFIG_SYS_MEMTEST_END		0x0C00000 /* 4 ... 12 MB in DRAM */
 
-#define	CFG_HZ			1000	/* decrementer freq: 1 ms ticks	*/
-#define CFG_CLKS_IN_HZ		1	/* everything, incl board info, in Hz */
-#define CFG_EXTBDINFO		1	/* To use extended board_info (bd_t) */
-#define CFG_LOAD_ADDR		0x100000 /* default load address */
+#define	CONFIG_SYS_HZ			1000	/* decrementer freq: 1 ms ticks	*/
+#define CONFIG_SYS_CLKS_IN_HZ		1	/* everything, incl board info, in Hz */
+#define CONFIG_SYS_EXTBDINFO		1	/* To use extended board_info (bd_t) */
+#define CONFIG_SYS_LOAD_ADDR		0x100000 /* default load address */
 
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define CFG_BOOTMAPSZ		(8 << 20) /* Initial Memory map for Linux */
+#define CONFIG_SYS_BOOTMAPSZ		(8 << 20) /* Initial Memory map for Linux */
 
 /*
  * watchdog configuration
@@ -160,11 +160,11 @@
  * UART configuration
  *
  */
-#undef CFG_EXT_SERIAL_CLOCK		/* use internal serial clock */
-#undef  CFG_IGNORE_405_UART_ERRATA_59	/* ignore ppc405gp errata #59 */
-#define CFG_BASE_BAUD		691200
+#undef CONFIG_SYS_EXT_SERIAL_CLOCK		/* use internal serial clock */
+#undef  CONFIG_SYS_IGNORE_405_UART_ERRATA_59	/* ignore ppc405gp errata #59 */
+#define CONFIG_SYS_BASE_BAUD		691200
 #define CONFIG_BAUDRATE		38400	/* Default baud rate */
-#define CFG_BAUDRATE_TABLE      \
+#define CONFIG_SYS_BAUDRATE_TABLE      \
     { 300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400 }
 
 /*
@@ -172,13 +172,14 @@
  *
  */
 #define CONFIG_HARD_I2C		1	/* I2C with hardware support	*/
-#define CFG_I2C_SPEED		100000	/* I2C speed			*/
-#define CFG_I2C_SLAVE		0x7F	/* I2C slave address		*/
+#define CONFIG_SYS_I2C_SPEED		100000	/* I2C speed			*/
+#define CONFIG_SYS_I2C_SLAVE		0x7F	/* I2C slave address		*/
 
 /*
  * MII PHY configuration
  *
  */
+#define CONFIG_PPC4xx_EMAC
 #define CONFIG_MII		1	/* MII PHY management		*/
 #define CONFIG_PHY_ADDR		0	/* PHY address			*/
 #define CONFIG_PHY_CMD_DELAY	40	/* PHY COMMAND delay		*/
@@ -208,14 +209,14 @@
 #undef  CONFIG_PCI_SCAN_SHOW            /* print pci devices @ startup  */
 #define CONFIG_PCI_BOOTDELAY    0       /* enable pci bootdelay variable*/
 
-#define CFG_PCI_SUBSYS_VENDORID 0x0000  /* PCI Vendor ID: to-do!!!      */
-#define CFG_PCI_SUBSYS_DEVICEID 0x0000  /* PCI Device ID: to-do!!!      */
-#define CFG_PCI_PTM1LA  0x00000000      /* point to sdram               */
-#define CFG_PCI_PTM1MS  0x80000001      /* 2GB, enable hard-wired to 1  */
-#define CFG_PCI_PTM1PCI 0x00000000      /* Host: use this pci address   */
-#define CFG_PCI_PTM2LA  0x00000000      /* disabled                     */
-#define CFG_PCI_PTM2MS  0x00000000      /* disabled                     */
-#define CFG_PCI_PTM2PCI 0x04000000      /* Host: use this pci address   */
+#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x0000  /* PCI Vendor ID: to-do!!!      */
+#define CONFIG_SYS_PCI_SUBSYS_DEVICEID 0x0000  /* PCI Device ID: to-do!!!      */
+#define CONFIG_SYS_PCI_PTM1LA  0x00000000      /* point to sdram               */
+#define CONFIG_SYS_PCI_PTM1MS  0x80000001      /* 2GB, enable hard-wired to 1  */
+#define CONFIG_SYS_PCI_PTM1PCI 0x00000000      /* Host: use this pci address   */
+#define CONFIG_SYS_PCI_PTM2LA  0x00000000      /* disabled                     */
+#define CONFIG_SYS_PCI_PTM2MS  0x00000000      /* disabled                     */
+#define CONFIG_SYS_PCI_PTM2PCI 0x04000000      /* Host: use this pci address   */
 
 /*
  * IDE stuff
@@ -229,64 +230,64 @@
  * Environment configuration
  *
  */
-#define CFG_ENV_IS_IN_FLASH	1	/* environment is in FLASH	*/
-#undef CFG_ENV_IS_IN_NVRAM
-#undef CFG_ENV_IS_IN_EEPROM
+#define CONFIG_ENV_IS_IN_FLASH	1	/* environment is in FLASH	*/
+#undef CONFIG_ENV_IS_IN_NVRAM
+#undef CONFIG_ENV_IS_IN_EEPROM
 
 /*
  * General Memory organization
  *
  * Start addresses for the final memory configuration
  * (Set up by the startup code)
- * Please note that CFG_SDRAM_BASE _must_ start at 0
+ * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
  */
-#define CFG_SDRAM_BASE		0x00000000
-#define CFG_FLASH_BASE		0xFF800000
-#define CFG_FLASH_SIZE		0x00800000
-#define CFG_MONITOR_BASE	TEXT_BASE
-#define CFG_MONITOR_LEN		(256 * 1024) /* Reserve 256 KB for Monitor */
-#define CFG_MALLOC_LEN		(128 * 1024) /* Reserve 128 KB for malloc() */
-
-#if CFG_MONITOR_BASE < CFG_FLASH_BASE
-#define CFG_RAMSTART
+#define CONFIG_SYS_SDRAM_BASE		0x00000000
+#define CONFIG_SYS_FLASH_BASE		0xFF800000
+#define CONFIG_SYS_FLASH_SIZE		0x00800000
+#define CONFIG_SYS_MONITOR_BASE	TEXT_BASE
+#define CONFIG_SYS_MONITOR_LEN		(256 * 1024) /* Reserve 256 KB for Monitor */
+#define CONFIG_SYS_MALLOC_LEN		(128 * 1024) /* Reserve 128 KB for malloc() */
+
+#if CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE
+#define CONFIG_SYS_RAMSTART
 #endif
 
-#if defined(CFG_ENV_IS_IN_FLASH)
-#define CFG_ENV_IN_OWN_SECTOR	1	   /* Give Environment own sector */
-#define CFG_ENV_ADDR		0xFFF00000 /* Address of Environment Sector */
-#define	CFG_ENV_SIZE		0x00001000 /* Size of Environment */
-#define CFG_ENV_SECT_SIZE	0x00040000 /* Size of Environment Sector */
+#if defined(CONFIG_ENV_IS_IN_FLASH)
+#define CONFIG_ENV_IN_OWN_SECTOR	1	   /* Give Environment own sector */
+#define CONFIG_ENV_ADDR		0xFFF00000 /* Address of Environment Sector */
+#define	CONFIG_ENV_SIZE		0x00001000 /* Size of Environment */
+#define CONFIG_ENV_SECT_SIZE	0x00040000 /* Size of Environment Sector */
 #endif
 
 /*
  * FLASH Device configuration
  *
  */
-#define CFG_FLASH_CFI		1	/* flash is CFI conformant	*/
+#define CONFIG_SYS_FLASH_CFI		1	/* flash is CFI conformant	*/
 #define CONFIG_FLASH_CFI_DRIVER	1	/* use common cfi driver	*/
-#define CFG_FLASH_USE_BUFFER_WRITE 1	/* use buffered writes (20x faster) */
-#define CFG_MAX_FLASH_BANKS	1	/* max # of memory banks	*/
-#define CFG_FLASH_INCREMENT	0	/* there is only one bank	*/
-#define CFG_MAX_FLASH_SECT	64	/* max # of sectors on one chip	*/
-#define CFG_FLASH_PROTECTION	1	/* hardware flash protection	*/
-#define CFG_FLASH_BANKS_LIST	{ CFG_FLASH_BASE }
+#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1	/* use buffered writes (20x faster) */
+#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max # of memory banks	*/
+#define CONFIG_SYS_FLASH_INCREMENT	0	/* there is only one bank	*/
+#define CONFIG_SYS_MAX_FLASH_SECT	64	/* max # of sectors on one chip	*/
+#define CONFIG_SYS_FLASH_PROTECTION	1	/* hardware flash protection	*/
+#define CONFIG_SYS_FLASH_BANKS_LIST	{ CONFIG_SYS_FLASH_BASE }
 
 /*
  * On Chip Memory location/size
  *
  */
-#define CFG_OCM_DATA_ADDR	0xF8000000
-#define CFG_OCM_DATA_SIZE	0x1000
+#define CONFIG_SYS_OCM_DATA_ADDR	0xF8000000
+#define CONFIG_SYS_OCM_DATA_SIZE	0x1000
 
 /*
  * Global info and initial stack
  *
  */
-#define CFG_INIT_RAM_ADDR	CFG_OCM_DATA_ADDR /* inside of on-chip SRAM */
-#define CFG_INIT_RAM_END	CFG_OCM_DATA_SIZE /* End of used area in RAM */
-#define CFG_GBL_DATA_SIZE	128 /* byte size reserved for initial data */
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_OCM_DATA_ADDR /* inside of on-chip SRAM */
+#define CONFIG_SYS_INIT_RAM_END	CONFIG_SYS_OCM_DATA_SIZE /* End of used area in RAM */
+#define CONFIG_SYS_GBL_DATA_SIZE	128 /* byte size reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
 /*
  * Miscellaneous board specific definitions
diff --git a/include/configs/csb637.h b/include/configs/csb637.h
index 88c8fdbf7..682db447d 100644
--- a/include/configs/csb637.h
+++ b/include/configs/csb637.h
@@ -43,7 +43,7 @@
 #define CONFIG_INITRD_TAG	1
 
 #ifndef CONFIG_SKIP_LOWLEVEL_INIT
-#define CFG_USE_MAIN_OSCILLATOR		1
+#define CONFIG_SYS_USE_MAIN_OSCILLATOR		1
 /* flash */
 #define MC_PUIA_VAL	0x00000000
 #define MC_PUP_VAL	0x00000000
@@ -72,16 +72,18 @@
 #define SDRC_MR_VAL2	0x00000003 /* Load Mode Register */
 #define SDRC_MR_VAL3	0x00000000 /* Normal Mode */
 #define SDRC_TR_VAL	0x000002E0 /* Write refresh rate */
+#else
+#define CONFIG_SKIP_RELOCATE_UBOOT
 #endif	/* CONFIG_SKIP_LOWLEVEL_INIT */
 /*
  * Size of malloc() pool
  */
-#define CFG_MALLOC_LEN	(CFG_ENV_SIZE + 128*1024)
-#define CFG_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
+#define CONFIG_SYS_MALLOC_LEN	(CONFIG_ENV_SIZE + 128*1024)
+#define CONFIG_SYS_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
 
 #define CONFIG_BAUDRATE 115200
 
-#define CFG_AT91C_BRGR_DIVISOR	75	/* hardcode so no __divsi3 : AT91C_MASTER_CLOCK / baudrate / 16 */
+#define CONFIG_SYS_AT91C_BRGR_DIVISOR	75	/* hardcode so no __divsi3 : AT91C_MASTER_CLOCK / baudrate / 16 */
 
 /*
  * Hardware drivers
@@ -120,7 +122,7 @@
 
 #ifdef	NAND_SUPPORT_HAS_BEEN_FIXED	/* NAND support is broken / unimplemented */
 
-#define CFG_MAX_NAND_DEVICE	1	/* Max number of NAND devices		*/
+#define CONFIG_SYS_MAX_NAND_DEVICE	1	/* Max number of NAND devices		*/
 #define SECTORSIZE 512
 
 #define ADDR_COLUMN 1
@@ -156,65 +158,65 @@
 #define PHYS_SDRAM			0x20000000
 #define PHYS_SDRAM_SIZE			0x4000000  /* 64 megs */
 
-#define CFG_MEMTEST_START		PHYS_SDRAM
-#define CFG_MEMTEST_END			CFG_MEMTEST_START + PHYS_SDRAM_SIZE - 512*1024 - 4
-#define CFG_ALT_MEMTEST			1
-#define CFG_MEMTEST_SCRATCH		CFG_MEMTEST_START + PHYS_SDRAM_SIZE - 4
+#define CONFIG_SYS_MEMTEST_START		PHYS_SDRAM
+#define CONFIG_SYS_MEMTEST_END			CONFIG_SYS_MEMTEST_START + PHYS_SDRAM_SIZE - 512*1024 - 4
+#define CONFIG_SYS_ALT_MEMTEST			1
+#define CONFIG_SYS_MEMTEST_SCRATCH		CONFIG_SYS_MEMTEST_START + PHYS_SDRAM_SIZE - 4
 
 #define CONFIG_DRIVER_ETHER
 #define CONFIG_NET_RETRY_COUNT		20
 #undef CONFIG_AT91C_USE_RMII
 
 #undef CONFIG_HAS_DATAFLASH
-#define CFG_SPI_WRITE_TOUT		(5*CFG_HZ)
-#define CFG_MAX_DATAFLASH_BANKS		0
-#define CFG_MAX_DATAFLASH_PAGES		16384
-#define CFG_DATAFLASH_LOGIC_ADDR_CS0	0xC0000000	/* Logical adress for CS0 */
-#define CFG_DATAFLASH_LOGIC_ADDR_CS3	0xD0000000	/* Logical adress for CS3 */
+#define CONFIG_SYS_SPI_WRITE_TOUT		(5*CONFIG_SYS_HZ)
+#define CONFIG_SYS_MAX_DATAFLASH_BANKS		0
+#define CONFIG_SYS_MAX_DATAFLASH_PAGES		16384
+#define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0	0xC0000000	/* Logical adress for CS0 */
+#define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS3	0xD0000000	/* Logical adress for CS3 */
 
 /*
  * FLASH Device configuration
  */
 #define PHYS_FLASH_1			0x10000000
 #define PHYS_FLASH_SIZE			0x800000  /* 8 megs main flash */
-#define CFG_FLASH_BASE			PHYS_FLASH_1
-#define CFG_FLASH_CFI		1	/* flash is CFI conformant	*/
+#define CONFIG_SYS_FLASH_BASE			PHYS_FLASH_1
+#define CONFIG_SYS_FLASH_CFI		1	/* flash is CFI conformant	*/
 #define CONFIG_FLASH_CFI_DRIVER	1	/* use common cfi driver	*/
-#define CFG_FLASH_EMPTY_INFO
-#define CFG_FLASH_USE_BUFFER_WRITE 1	/* use buffered writes (20x faster) */
-#define CFG_MAX_FLASH_BANKS	1	/* max # of memory banks	*/
-#define CFG_FLASH_INCREMENT	0	/* there is only one bank	*/
-#define CFG_FLASH_PROTECTION	1	/* hardware flash protection	*/
-#define CFG_MAX_FLASH_SECT		64
-
-#define CFG_JFFS2_FIRST_BANK	0
-#define CFG_JFFS2_FIRST_SECTOR	3
-#define CFG_JFFS2_NUM_BANKS	1
-
-#undef	CFG_ENV_IS_IN_DATAFLASH
-
-#ifdef CFG_ENV_IS_IN_DATAFLASH
-#define CFG_ENV_OFFSET			0x20000
-#define CFG_ENV_ADDR			(CFG_DATAFLASH_LOGIC_ADDR_CS0 + CFG_ENV_OFFSET)
-#define CFG_ENV_SIZE			0x2000  /* 0x8000 */
+#define CONFIG_SYS_FLASH_EMPTY_INFO
+#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1	/* use buffered writes (20x faster) */
+#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max # of memory banks	*/
+#define CONFIG_SYS_FLASH_INCREMENT	0	/* there is only one bank	*/
+#define CONFIG_SYS_FLASH_PROTECTION	1	/* hardware flash protection	*/
+#define CONFIG_SYS_MAX_FLASH_SECT		64
+
+#define CONFIG_SYS_JFFS2_FIRST_BANK	0
+#define CONFIG_SYS_JFFS2_FIRST_SECTOR	3
+#define CONFIG_SYS_JFFS2_NUM_BANKS	1
+
+#undef	CONFIG_ENV_IS_IN_DATAFLASH
+
+#ifdef CONFIG_ENV_IS_IN_DATAFLASH
+#define CONFIG_ENV_OFFSET			0x20000
+#define CONFIG_ENV_ADDR			(CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 + CONFIG_ENV_OFFSET)
+#define CONFIG_ENV_SIZE			0x2000  /* 0x8000 */
 #else
-#define CFG_ENV_IS_IN_FLASH		1
-#define CFG_ENV_ADDR			(PHYS_FLASH_1 + 0x20000)  /* after u-boot.bin */
-#define CFG_ENV_SIZE			0x20000 /* sectors are 128K here */
-#endif	/* CFG_ENV_IS_IN_DATAFLASH */
+#define CONFIG_ENV_IS_IN_FLASH		1
+#define CONFIG_ENV_ADDR			(PHYS_FLASH_1 + 0x20000)  /* after u-boot.bin */
+#define CONFIG_ENV_SIZE			0x20000 /* sectors are 128K here */
+#endif	/* CONFIG_ENV_IS_IN_DATAFLASH */
 
 
-#define CFG_LOAD_ADDR		0x21000000  /* default load address */
+#define CONFIG_SYS_LOAD_ADDR		0x21000000  /* default load address */
 
-#define CFG_BAUDRATE_TABLE	{ 115200, 57600, 38400, 19200, 9600 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 115200, 57600, 38400, 19200, 9600 }
 
-#define CFG_PROMPT		"U-Boot> "	/* Monitor Command Prompt */
-#define CFG_CBSIZE		256		/* Console I/O Buffer Size */
-#define CFG_MAXARGS		16		/* max number of command args */
-#define CFG_PBSIZE		(CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define CONFIG_SYS_PROMPT		"U-Boot> "	/* Monitor Command Prompt */
+#define CONFIG_SYS_CBSIZE		256		/* Console I/O Buffer Size */
+#define CONFIG_SYS_MAXARGS		16		/* max number of command args */
+#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
 
-#define CFG_HZ 1000
-#define CFG_HZ_CLOCK AT91C_MASTER_CLOCK/2	/* AT91C_TC0_CMR is implicitly set to */
+#define CONFIG_SYS_HZ 1000
+#define CONFIG_SYS_HZ_CLOCK AT91C_MASTER_CLOCK/2	/* AT91C_TC0_CMR is implicitly set to */
 						/* AT91C_TC_TIMER_DIV1_CLOCK */
 
 #define CONFIG_STACKSIZE	(32*1024)	/* regular stack */
diff --git a/include/configs/davinci_dvevm.h b/include/configs/davinci_dvevm.h
index c27ce18ff..6885b2cbd 100644
--- a/include/configs/davinci_dvevm.h
+++ b/include/configs/davinci_dvevm.h
@@ -50,31 +50,31 @@
 /* Board */
 /*=======*/
 #define DV_EVM
-#define CFG_NAND_SMALLPAGE
-#define CFG_USE_NOR
+#define CONFIG_SYS_NAND_SMALLPAGE
+#define CONFIG_SYS_USE_NOR
 /*===================*/
 /* SoC Configuration */
 /*===================*/
 #define CONFIG_ARM926EJS			/* arm926ejs CPU core */
 #define CONFIG_SYS_CLK_FREQ	297000000	/* Arm Clock frequency */
-#define CFG_TIMERBASE		0x01c21400	/* use timer 0 */
-#define CFG_HZ_CLOCK		27000000	/* Timer Input clock freq */
-#define CFG_HZ			1000
+#define CONFIG_SYS_TIMERBASE		0x01c21400	/* use timer 0 */
+#define CONFIG_SYS_HZ_CLOCK		27000000	/* Timer Input clock freq */
+#define CONFIG_SYS_HZ			1000
 /*====================================================*/
 /* EEPROM definitions for Atmel 24C256BN SEEPROM chip */
 /* on Sonata/DV_EVM board. No EEPROM on schmoogie.    */
 /*====================================================*/
-#define CFG_I2C_EEPROM_ADDR_LEN		2
-#define CFG_I2C_EEPROM_ADDR		0x50
-#define CFG_EEPROM_PAGE_WRITE_BITS	6
-#define CFG_EEPROM_PAGE_WRITE_DELAY_MS	20
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN		2
+#define CONFIG_SYS_I2C_EEPROM_ADDR		0x50
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS	6
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	20
 /*=============*/
 /* Memory Info */
 /*=============*/
-#define CFG_MALLOC_LEN		(0x10000 + 128*1024)	/* malloc() len */
-#define CFG_GBL_DATA_SIZE	128		/* reserved for initial data */
-#define CFG_MEMTEST_START	0x80000000	/* memtest start address */
-#define CFG_MEMTEST_END		0x81000000	/* 16MB RAM test */
+#define CONFIG_SYS_MALLOC_LEN		(0x10000 + 128*1024)	/* malloc() len */
+#define CONFIG_SYS_GBL_DATA_SIZE	128		/* reserved for initial data */
+#define CONFIG_SYS_MEMTEST_START	0x80000000	/* memtest start address */
+#define CONFIG_SYS_MEMTEST_END		0x81000000	/* 16MB RAM test */
 #define CONFIG_NR_DRAM_BANKS	1		/* we have 1 bank of DRAM */
 #define CONFIG_STACKSIZE	(256*1024)	/* regular stack */
 #define PHYS_SDRAM_1		0x80000000	/* DDR Start */
@@ -83,21 +83,21 @@
 /*====================*/
 /* Serial Driver info */
 /*====================*/
-#define CFG_NS16550
-#define CFG_NS16550_SERIAL
-#define CFG_NS16550_REG_SIZE	4		/* NS16550 register size */
-#define CFG_NS16550_COM1	0x01c20000	/* Base address of UART0 */
-#define CFG_NS16550_CLK		27000000	/* Input clock to NS16550 */
+#define CONFIG_SYS_NS16550
+#define CONFIG_SYS_NS16550_SERIAL
+#define CONFIG_SYS_NS16550_REG_SIZE	4		/* NS16550 register size */
+#define CONFIG_SYS_NS16550_COM1	0x01c20000	/* Base address of UART0 */
+#define CONFIG_SYS_NS16550_CLK		27000000	/* Input clock to NS16550 */
 #define CONFIG_CONS_INDEX	1		/* use UART0 for console */
 #define CONFIG_BAUDRATE		115200		/* Default baud rate */
-#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
 /*===================*/
 /* I2C Configuration */
 /*===================*/
 #define CONFIG_HARD_I2C
 #define CONFIG_DRIVER_DAVINCI_I2C
-#define CFG_I2C_SPEED		80000	/* 100Kbps won't work, silicon bug */
-#define CFG_I2C_SLAVE		10	/* Bogus, master-only in U-Boot */
+#define CONFIG_SYS_I2C_SPEED		80000	/* 100Kbps won't work, silicon bug */
+#define CONFIG_SYS_I2C_SLAVE		10	/* Bogus, master-only in U-Boot */
 /*==================================*/
 /* Network & Ethernet Configuration */
 /*==================================*/
@@ -111,26 +111,26 @@
 /*=====================*/
 /* Flash & Environment */
 /*=====================*/
-#ifdef CFG_USE_NAND
-#undef CFG_ENV_IS_IN_FLASH
-#define CFG_NO_FLASH
-#define CFG_ENV_IS_IN_NAND		/* U-Boot env in NAND Flash  */
-#ifdef CFG_NAND_SMALLPAGE
-#define CFG_ENV_SECT_SIZE	512	/* Env sector Size */
-#define CFG_ENV_SIZE		SZ_16K
+#ifdef CONFIG_SYS_USE_NAND
+#undef CONFIG_ENV_IS_IN_FLASH
+#define CONFIG_SYS_NO_FLASH
+#define CONFIG_ENV_IS_IN_NAND		/* U-Boot env in NAND Flash  */
+#ifdef CONFIG_SYS_NAND_SMALLPAGE
+#define CONFIG_ENV_SECT_SIZE	512	/* Env sector Size */
+#define CONFIG_ENV_SIZE		SZ_16K
 #else
-#define CFG_ENV_SECT_SIZE	2048	/* Env sector Size */
-#define CFG_ENV_SIZE		SZ_128K
+#define CONFIG_ENV_SECT_SIZE	2048	/* Env sector Size */
+#define CONFIG_ENV_SIZE		SZ_128K
 #endif
 #define CONFIG_SKIP_LOWLEVEL_INIT	/* U-Boot is loaded by a bootloader */
 #define CONFIG_SKIP_RELOCATE_UBOOT	/* to a proper address, init done */
-#define CFG_NAND_BASE		0x02000000
-#define CFG_NAND_HW_ECC
-#define CFG_MAX_NAND_DEVICE	1	/* Max number of NAND devices */
+#define CONFIG_SYS_NAND_BASE		0x02000000
+#define CONFIG_SYS_NAND_HW_ECC
+#define CONFIG_SYS_MAX_NAND_DEVICE	1	/* Max number of NAND devices */
 #define NAND_MAX_CHIPS		1
-#define CFG_ENV_OFFSET		0x0	/* Block 0--not used by bootcode */
+#define CONFIG_ENV_OFFSET		0x0	/* Block 0--not used by bootcode */
 #define DEF_BOOTM		""
-#elif defined(CFG_USE_NOR)
+#elif defined(CONFIG_SYS_USE_NOR)
 #ifdef CONFIG_NOR_UART_BOOT
 #define CONFIG_SKIP_LOWLEVEL_INIT	/* U-Boot is loaded by a bootloader */
 #define CONFIG_SKIP_RELOCATE_UBOOT	/* to a proper address, init done */
@@ -138,18 +138,18 @@
 #undef CONFIG_SKIP_LOWLEVEL_INIT
 #undef CONFIG_SKIP_RELOCATE_UBOOT
 #endif
-#define CFG_ENV_IS_IN_FLASH
-#undef CFG_NO_FLASH
+#define CONFIG_ENV_IS_IN_FLASH
+#undef CONFIG_SYS_NO_FLASH
 #define CONFIG_FLASH_CFI_DRIVER
-#define CFG_FLASH_CFI
-#define CFG_MAX_FLASH_BANKS	1		/* max number of flash banks */
-#define CFG_FLASH_SECT_SZ	0x10000		/* 64KB sect size AMD Flash */
-#define CFG_ENV_OFFSET		(CFG_FLASH_SECT_SZ*3)
+#define CONFIG_SYS_FLASH_CFI
+#define CONFIG_SYS_MAX_FLASH_BANKS	1		/* max number of flash banks */
+#define CONFIG_SYS_FLASH_SECT_SZ	0x10000		/* 64KB sect size AMD Flash */
+#define CONFIG_ENV_OFFSET		(CONFIG_SYS_FLASH_SECT_SZ*3)
 #define PHYS_FLASH_1		0x02000000	/* CS2 Base address	 */
-#define CFG_FLASH_BASE		PHYS_FLASH_1	/* Flash Base for U-Boot */
+#define CONFIG_SYS_FLASH_BASE		PHYS_FLASH_1	/* Flash Base for U-Boot */
 #define PHYS_FLASH_SIZE		0x2000000	/* Flash size 32MB	 */
-#define CFG_MAX_FLASH_SECT	(PHYS_FLASH_SIZE/CFG_FLASH_SECT_SZ)
-#define CFG_ENV_SECT_SIZE	CFG_FLASH_SECT_SZ	/* Env sector Size */
+#define CONFIG_SYS_MAX_FLASH_SECT	(PHYS_FLASH_SIZE/CONFIG_SYS_FLASH_SECT_SZ)
+#define CONFIG_ENV_SECT_SIZE	CONFIG_SYS_FLASH_SECT_SZ	/* Env sector Size */
 #endif
 /*==============================*/
 /* U-Boot general configuration */
@@ -158,18 +158,18 @@
 #define CONFIG_MISC_INIT_R
 #undef CONFIG_BOOTDELAY
 #define CONFIG_BOOTFILE		"uImage"	/* Boot file name */
-#define CFG_PROMPT		"U-Boot > "	/* Monitor Command Prompt */
-#define CFG_CBSIZE		1024		/* Console I/O Buffer Size  */
-#define CFG_PBSIZE		(CFG_CBSIZE+sizeof(CFG_PROMPT)+16)	/* Print buffer sz */
-#define CFG_MAXARGS		16		/* max number of command args */
-#define CFG_BARGSIZE		CFG_CBSIZE	/* Boot Argument Buffer Size */
-#define CFG_LOAD_ADDR		0x80700000	/* default Linux kernel load address */
+#define CONFIG_SYS_PROMPT		"U-Boot > "	/* Monitor Command Prompt */
+#define CONFIG_SYS_CBSIZE		1024		/* Console I/O Buffer Size  */
+#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)	/* Print buffer sz */
+#define CONFIG_SYS_MAXARGS		16		/* max number of command args */
+#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size */
+#define CONFIG_SYS_LOAD_ADDR		0x80700000	/* default Linux kernel load address */
 #define CONFIG_VERSION_VARIABLE
 #define CONFIG_AUTO_COMPLETE		/* Won't work with hush so far, may be later */
-#define CFG_HUSH_PARSER
-#define CFG_PROMPT_HUSH_PS2	"> "
+#define CONFIG_SYS_HUSH_PARSER
+#define CONFIG_SYS_PROMPT_HUSH_PS2	"> "
 #define CONFIG_CMDLINE_EDITING
-#define CFG_LONGHELP
+#define CONFIG_SYS_LONGHELP
 #define CONFIG_CRC32_VERIFY
 #define CONFIG_MX_CYCLIC
 /*===================*/
@@ -195,14 +195,14 @@
 #undef CONFIG_CMD_BDI
 #undef CONFIG_CMD_FPGA
 #undef CONFIG_CMD_SETGETDCR
-#ifdef CFG_USE_NAND
+#ifdef CONFIG_SYS_USE_NAND
 #undef CONFIG_CMD_FLASH
 #undef CONFIG_CMD_IMLS
 #define CONFIG_CMD_NAND
-#elif defined(CFG_USE_NOR)
+#elif defined(CONFIG_SYS_USE_NOR)
 #define CONFIG_CMD_JFFS2
 #else
-#error "Either CFG_USE_NAND or CFG_USE_NOR _MUST_ be defined !!!"
+#error "Either CONFIG_SYS_USE_NAND or CONFIG_SYS_USE_NOR _MUST_ be defined !!!"
 #endif
 /*=======================*/
 /* KGDB support (if any) */
diff --git a/include/configs/davinci_schmoogie.h b/include/configs/davinci_schmoogie.h
index 10166a147..8d7bcf57c 100644
--- a/include/configs/davinci_schmoogie.h
+++ b/include/configs/davinci_schmoogie.h
@@ -25,23 +25,23 @@
 /* Board */
 /*=======*/
 #define SCHMOOGIE
-#define CFG_NAND_LARGEPAGE
-#define CFG_USE_NAND
+#define CONFIG_SYS_NAND_LARGEPAGE
+#define CONFIG_SYS_USE_NAND
 /*===================*/
 /* SoC Configuration */
 /*===================*/
 #define CONFIG_ARM926EJS			/* arm926ejs CPU core */
 #define CONFIG_SYS_CLK_FREQ	297000000	/* Arm Clock frequency */
-#define CFG_TIMERBASE		0x01c21400	/* use timer 0 */
-#define CFG_HZ_CLOCK		27000000	/* Timer Input clock freq */
-#define CFG_HZ			1000
+#define CONFIG_SYS_TIMERBASE		0x01c21400	/* use timer 0 */
+#define CONFIG_SYS_HZ_CLOCK		27000000	/* Timer Input clock freq */
+#define CONFIG_SYS_HZ			1000
 /*=============*/
 /* Memory Info */
 /*=============*/
-#define CFG_MALLOC_LEN		(0x10000 + 256*1024)	/* malloc() len */
-#define CFG_GBL_DATA_SIZE	128		/* reserved for initial data */
-#define CFG_MEMTEST_START	0x80000000	/* memtest start address */
-#define CFG_MEMTEST_END		0x81000000	/* 16MB RAM test */
+#define CONFIG_SYS_MALLOC_LEN		(0x10000 + 256*1024)	/* malloc() len */
+#define CONFIG_SYS_GBL_DATA_SIZE	128		/* reserved for initial data */
+#define CONFIG_SYS_MEMTEST_START	0x80000000	/* memtest start address */
+#define CONFIG_SYS_MEMTEST_END		0x81000000	/* 16MB RAM test */
 #define CONFIG_NR_DRAM_BANKS	1		/* we have 1 bank of DRAM */
 #define CONFIG_STACKSIZE	(256*1024)	/* regular stack */
 #define PHYS_SDRAM_1		0x80000000	/* DDR Start */
@@ -50,21 +50,21 @@
 /*====================*/
 /* Serial Driver info */
 /*====================*/
-#define CFG_NS16550
-#define CFG_NS16550_SERIAL
-#define CFG_NS16550_REG_SIZE	4		/* NS16550 register size */
-#define CFG_NS16550_COM1	0x01c20000	/* Base address of UART0 */
-#define CFG_NS16550_CLK		27000000	/* Input clock to NS16550 */
+#define CONFIG_SYS_NS16550
+#define CONFIG_SYS_NS16550_SERIAL
+#define CONFIG_SYS_NS16550_REG_SIZE	4		/* NS16550 register size */
+#define CONFIG_SYS_NS16550_COM1	0x01c20000	/* Base address of UART0 */
+#define CONFIG_SYS_NS16550_CLK		27000000	/* Input clock to NS16550 */
 #define CONFIG_CONS_INDEX	1		/* use UART0 for console */
 #define CONFIG_BAUDRATE		115200		/* Default baud rate */
-#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
 /*===================*/
 /* I2C Configuration */
 /*===================*/
 #define CONFIG_HARD_I2C
 #define CONFIG_DRIVER_DAVINCI_I2C
-#define CFG_I2C_SPEED		80000	/* 100Kbps won't work, silicon bug */
-#define CFG_I2C_SLAVE		10	/* Bogus, master-only in U-Boot */
+#define CONFIG_SYS_I2C_SPEED		80000	/* 100Kbps won't work, silicon bug */
+#define CONFIG_SYS_I2C_SLAVE		10	/* Bogus, master-only in U-Boot */
 /*==================================*/
 /* Network & Ethernet Configuration */
 /*==================================*/
@@ -79,26 +79,26 @@
 /*=====================*/
 /* Flash & Environment */
 /*=====================*/
-#undef CFG_ENV_IS_IN_FLASH
-#define CFG_NO_FLASH
-#define CFG_ENV_IS_IN_NAND		/* U-Boot env in NAND Flash  */
-#define CFG_ENV_SECT_SIZE	2048	/* Env sector Size */
-#define CFG_ENV_SIZE		SZ_128K
+#undef CONFIG_ENV_IS_IN_FLASH
+#define CONFIG_SYS_NO_FLASH
+#define CONFIG_ENV_IS_IN_NAND		/* U-Boot env in NAND Flash  */
+#define CONFIG_ENV_SECT_SIZE	2048	/* Env sector Size */
+#define CONFIG_ENV_SIZE		SZ_128K
 #define CONFIG_SKIP_LOWLEVEL_INIT	/* U-Boot is loaded by a bootloader */
 #define CONFIG_SKIP_RELOCATE_UBOOT	/* to a proper address, init done */
-#define CFG_NAND_BASE		0x02000000
-#define CFG_NAND_HW_ECC
-#define CFG_MAX_NAND_DEVICE	1	/* Max number of NAND devices */
+#define CONFIG_SYS_NAND_BASE		0x02000000
+#define CONFIG_SYS_NAND_HW_ECC
+#define CONFIG_SYS_MAX_NAND_DEVICE	1	/* Max number of NAND devices */
 #define NAND_MAX_CHIPS		1
-#define CFG_ENV_OFFSET		0x0	/* Block 0--not used by bootcode */
+#define CONFIG_ENV_OFFSET		0x0	/* Block 0--not used by bootcode */
 /*=====================*/
 /* Board related stuff */
 /*=====================*/
 #define CONFIG_RTC_DS1307		/* RTC chip on SCHMOOGIE */
-#define CFG_I2C_RTC_ADDR	0x6f	/* RTC chip I2C address */
+#define CONFIG_SYS_I2C_RTC_ADDR	0x6f	/* RTC chip I2C address */
 #define CONFIG_HAS_UID
 #define CONFIG_UID_DS28CM00		/* Unique ID on SCHMOOGIE */
-#define CFG_UID_ADDR		0x50	/* UID chip I2C address */
+#define CONFIG_SYS_UID_ADDR		0x50	/* UID chip I2C address */
 /*==============================*/
 /* U-Boot general configuration */
 /*==============================*/
@@ -106,18 +106,18 @@
 #define CONFIG_MISC_INIT_R
 #undef CONFIG_BOOTDELAY
 #define CONFIG_BOOTFILE		"uImage"	/* Boot file name */
-#define CFG_PROMPT		"U-Boot > "	/* Monitor Command Prompt */
-#define CFG_CBSIZE		1024		/* Console I/O Buffer Size  */
-#define CFG_PBSIZE		(CFG_CBSIZE+sizeof(CFG_PROMPT)+16)	/* Print buffer sz */
-#define CFG_MAXARGS		16		/* max number of command args */
-#define CFG_BARGSIZE		CFG_CBSIZE	/* Boot Argument Buffer Size */
-#define CFG_LOAD_ADDR		0x80700000	/* default Linux kernel load address */
+#define CONFIG_SYS_PROMPT		"U-Boot > "	/* Monitor Command Prompt */
+#define CONFIG_SYS_CBSIZE		1024		/* Console I/O Buffer Size  */
+#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)	/* Print buffer sz */
+#define CONFIG_SYS_MAXARGS		16		/* max number of command args */
+#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size */
+#define CONFIG_SYS_LOAD_ADDR		0x80700000	/* default Linux kernel load address */
 #define CONFIG_VERSION_VARIABLE
 #define CONFIG_AUTO_COMPLETE		/* Won't work with hush so far, may be later */
-#define CFG_HUSH_PARSER
-#define CFG_PROMPT_HUSH_PS2	"> "
+#define CONFIG_SYS_HUSH_PARSER
+#define CONFIG_SYS_PROMPT_HUSH_PS2	"> "
 #define CONFIG_CMDLINE_EDITING
-#define CFG_LONGHELP
+#define CONFIG_SYS_LONGHELP
 #define CONFIG_CRC32_VERIFY
 #define CONFIG_MX_CYCLIC
 /*===================*/
diff --git a/include/configs/davinci_sffsdr.h b/include/configs/davinci_sffsdr.h
index 7c860e5f0..e9cd5a662 100644
--- a/include/configs/davinci_sffsdr.h
+++ b/include/configs/davinci_sffsdr.h
@@ -26,45 +26,45 @@
 
 /* Board */
 #define SFFSDR
-#define CFG_NAND_LARGEPAGE
-#define CFG_USE_NAND
-#define CFG_USE_DSPLINK		/* This is to prevent U-Boot from
+#define CONFIG_SYS_NAND_LARGEPAGE
+#define CONFIG_SYS_USE_NAND
+#define CONFIG_SYS_USE_DSPLINK		/* This is to prevent U-Boot from
 				 * powering ON the DSP. */
 /* SoC Configuration */
 #define CONFIG_ARM926EJS			/* arm926ejs CPU core */
 #define CONFIG_SYS_CLK_FREQ	297000000	/* Arm Clock frequency */
-#define CFG_TIMERBASE		0x01c21400	/* use timer 0 */
-#define CFG_HZ_CLOCK		27000000	/* Timer Input clock freq */
-#define CFG_HZ			1000
+#define CONFIG_SYS_TIMERBASE		0x01c21400	/* use timer 0 */
+#define CONFIG_SYS_HZ_CLOCK		27000000	/* Timer Input clock freq */
+#define CONFIG_SYS_HZ			1000
 /* EEPROM definitions for Atmel 24LC64 EEPROM chip */
-#define CFG_I2C_EEPROM_ADDR_LEN		2
-#define CFG_I2C_EEPROM_ADDR		0x50
-#define CFG_EEPROM_PAGE_WRITE_BITS	5
-#define CFG_EEPROM_PAGE_WRITE_DELAY_MS	20
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN		2
+#define CONFIG_SYS_I2C_EEPROM_ADDR		0x50
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS	5
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	20
 /* Memory Info */
-#define CFG_MALLOC_LEN		(0x10000 + 256*1024)	/* malloc() len */
-#define CFG_GBL_DATA_SIZE	128		/* reserved for initial data */
-#define CFG_MEMTEST_START	0x80000000	/* memtest start address */
-#define CFG_MEMTEST_END		0x81000000	/* 16MB RAM test */
+#define CONFIG_SYS_MALLOC_LEN		(0x10000 + 256*1024)	/* malloc() len */
+#define CONFIG_SYS_GBL_DATA_SIZE	128		/* reserved for initial data */
+#define CONFIG_SYS_MEMTEST_START	0x80000000	/* memtest start address */
+#define CONFIG_SYS_MEMTEST_END		0x81000000	/* 16MB RAM test */
 #define CONFIG_NR_DRAM_BANKS	1		/* we have 1 bank of DRAM */
 #define CONFIG_STACKSIZE	(256*1024)	/* regular stack */
 #define PHYS_SDRAM_1		0x80000000	/* DDR Start */
 #define PHYS_SDRAM_1_SIZE	0x08000000	/* DDR size 128MB */
 #define DDR_4BANKS				/* 4-bank DDR2 (128MB) */
 /* Serial Driver info */
-#define CFG_NS16550
-#define CFG_NS16550_SERIAL
-#define CFG_NS16550_REG_SIZE	4		/* NS16550 register size */
-#define CFG_NS16550_COM1	0x01c20000	/* Base address of UART0 */
-#define CFG_NS16550_CLK		27000000	/* Input clock to NS16550 */
+#define CONFIG_SYS_NS16550
+#define CONFIG_SYS_NS16550_SERIAL
+#define CONFIG_SYS_NS16550_REG_SIZE	4		/* NS16550 register size */
+#define CONFIG_SYS_NS16550_COM1	0x01c20000	/* Base address of UART0 */
+#define CONFIG_SYS_NS16550_CLK		27000000	/* Input clock to NS16550 */
 #define CONFIG_CONS_INDEX	1		/* use UART0 for console */
 #define CONFIG_BAUDRATE		115200		/* Default baud rate */
-#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
 /* I2C Configuration */
 #define CONFIG_HARD_I2C
 #define CONFIG_DRIVER_DAVINCI_I2C
-#define CFG_I2C_SPEED		80000	/* 100Kbps won't work, silicon bug */
-#define CFG_I2C_SLAVE		10	/* Bogus, master-only in U-Boot */
+#define CONFIG_SYS_I2C_SPEED		80000	/* 100Kbps won't work, silicon bug */
+#define CONFIG_SYS_I2C_SLAVE		10	/* Bogus, master-only in U-Boot */
 /* Network & Ethernet Configuration */
 #define CONFIG_DRIVER_TI_EMAC
 #define CONFIG_MII
@@ -75,42 +75,42 @@
 #define CONFIG_NET_RETRY_COUNT	10
 #define CONFIG_OVERWRITE_ETHADDR_ONCE
 /* Flash & Environment */
-#undef CFG_ENV_IS_IN_FLASH
-#define CFG_NO_FLASH
-#define CFG_ENV_IS_IN_NAND		/* U-Boot env in NAND Flash  */
-#define CFG_ENV_SECT_SIZE	2048	/* Env sector Size */
-#define CFG_ENV_SIZE		SZ_128K
+#undef CONFIG_ENV_IS_IN_FLASH
+#define CONFIG_SYS_NO_FLASH
+#define CONFIG_ENV_IS_IN_NAND		/* U-Boot env in NAND Flash  */
+#define CONFIG_ENV_SECT_SIZE	2048	/* Env sector Size */
+#define CONFIG_ENV_SIZE		SZ_128K
 #define CONFIG_SKIP_LOWLEVEL_INIT	/* U-Boot is loaded by a bootloader */
 #define CONFIG_SKIP_RELOCATE_UBOOT	/* to a proper address, init done */
-#define CFG_NAND_BASE		0x02000000
-#define CFG_NAND_HW_ECC
-#define CFG_MAX_NAND_DEVICE	1	/* Max number of NAND devices */
+#define CONFIG_SYS_NAND_BASE		0x02000000
+#define CONFIG_SYS_NAND_HW_ECC
+#define CONFIG_SYS_MAX_NAND_DEVICE	1	/* Max number of NAND devices */
 #define NAND_MAX_CHIPS		1
-#define CFG_ENV_OFFSET		0x0	/* Block 0--not used by bootcode */
+#define CONFIG_ENV_OFFSET		0x0	/* Block 0--not used by bootcode */
 /* I2C switch definitions for PCA9543 chip */
-#define CFG_I2C_PCA9543_ADDR		0x70
-#define CFG_I2C_PCA9543_ADDR_LEN	0	/* Single register. */
-#define CFG_I2C_PCA9543_ENABLE_CH0	0x01	/* Enable channel 0. */
+#define CONFIG_SYS_I2C_PCA9543_ADDR		0x70
+#define CONFIG_SYS_I2C_PCA9543_ADDR_LEN	0	/* Single register. */
+#define CONFIG_SYS_I2C_PCA9543_ENABLE_CH0	0x01	/* Enable channel 0. */
 /* U-Boot general configuration */
 #undef CONFIG_USE_IRQ				/* No IRQ/FIQ in U-Boot */
 #define CONFIG_MISC_INIT_R
 #define CONFIG_BOOTDELAY	5		/* Autoboot after 5 seconds. */
 #define CONFIG_BOOTFILE		"uImage"	/* Boot file name */
-#define CFG_PROMPT		"U-Boot > "	/* Monitor Command Prompt */
-#define CFG_CBSIZE		1024		/* Console I/O Buffer Size  */
-#define CFG_PBSIZE							\
-		(CFG_CBSIZE + sizeof(CFG_PROMPT) + 16)	/* Print buffer size */
-#define CFG_MAXARGS		16		/* max number of command args */
-#define CFG_BARGSIZE		CFG_CBSIZE	/* Boot Argument Buffer Size */
-#define CFG_LOAD_ADDR		0x80700000	/* Default Linux kernel
+#define CONFIG_SYS_PROMPT		"U-Boot > "	/* Monitor Command Prompt */
+#define CONFIG_SYS_CBSIZE		1024		/* Console I/O Buffer Size  */
+#define CONFIG_SYS_PBSIZE							\
+		(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)	/* Print buffer size */
+#define CONFIG_SYS_MAXARGS		16		/* max number of command args */
+#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size */
+#define CONFIG_SYS_LOAD_ADDR		0x80700000	/* Default Linux kernel
 						 * load address. */
 #define CONFIG_VERSION_VARIABLE
 #define CONFIG_AUTO_COMPLETE		/* Won't work with hush so far,
 					 * may be later */
-#define CFG_HUSH_PARSER
-#define CFG_PROMPT_HUSH_PS2	"> "
+#define CONFIG_SYS_HUSH_PARSER
+#define CONFIG_SYS_PROMPT_HUSH_PS2	"> "
 #define CONFIG_CMDLINE_EDITING
-#define CFG_LONGHELP
+#define CONFIG_SYS_LONGHELP
 #define CONFIG_CRC32_VERIFY
 #define CONFIG_MX_CYCLIC
 /* Linux Information */
diff --git a/include/configs/davinci_sonata.h b/include/configs/davinci_sonata.h
index c55766ce3..381eeb7a1 100644
--- a/include/configs/davinci_sonata.h
+++ b/include/configs/davinci_sonata.h
@@ -50,31 +50,31 @@
 /* Board */
 /*=======*/
 #define SONATA_BOARD
-#define CFG_NAND_SMALLPAGE
-#define CFG_USE_NOR
+#define CONFIG_SYS_NAND_SMALLPAGE
+#define CONFIG_SYS_USE_NOR
 /*===================*/
 /* SoC Configuration */
 /*===================*/
 #define CONFIG_ARM926EJS			/* arm926ejs CPU core */
 #define CONFIG_SYS_CLK_FREQ	297000000	/* Arm Clock frequency */
-#define CFG_TIMERBASE		0x01c21400	/* use timer 0 */
-#define CFG_HZ_CLOCK		27000000	/* Timer Input clock freq */
-#define CFG_HZ			1000
+#define CONFIG_SYS_TIMERBASE		0x01c21400	/* use timer 0 */
+#define CONFIG_SYS_HZ_CLOCK		27000000	/* Timer Input clock freq */
+#define CONFIG_SYS_HZ			1000
 /*====================================================*/
 /* EEPROM definitions for Atmel 24C256BN SEEPROM chip */
 /* on Sonata/DV_EVM board. No EEPROM on schmoogie.    */
 /*====================================================*/
-#define CFG_I2C_EEPROM_ADDR_LEN		2
-#define CFG_I2C_EEPROM_ADDR		0x50
-#define CFG_EEPROM_PAGE_WRITE_BITS	6
-#define CFG_EEPROM_PAGE_WRITE_DELAY_MS	20
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN		2
+#define CONFIG_SYS_I2C_EEPROM_ADDR		0x50
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS	6
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	20
 /*=============*/
 /* Memory Info */
 /*=============*/
-#define CFG_MALLOC_LEN		(0x10000 + 128*1024)	/* malloc() len */
-#define CFG_GBL_DATA_SIZE	128		/* reserved for initial data */
-#define CFG_MEMTEST_START	0x80000000	/* memtest start address */
-#define CFG_MEMTEST_END		0x81000000	/* 16MB RAM test */
+#define CONFIG_SYS_MALLOC_LEN		(0x10000 + 128*1024)	/* malloc() len */
+#define CONFIG_SYS_GBL_DATA_SIZE	128		/* reserved for initial data */
+#define CONFIG_SYS_MEMTEST_START	0x80000000	/* memtest start address */
+#define CONFIG_SYS_MEMTEST_END		0x81000000	/* 16MB RAM test */
 #define CONFIG_NR_DRAM_BANKS	1		/* we have 1 bank of DRAM */
 #define CONFIG_STACKSIZE	(256*1024)	/* regular stack */
 #define PHYS_SDRAM_1		0x80000000	/* DDR Start */
@@ -83,21 +83,21 @@
 /*====================*/
 /* Serial Driver info */
 /*====================*/
-#define CFG_NS16550
-#define CFG_NS16550_SERIAL
-#define CFG_NS16550_REG_SIZE	4		/* NS16550 register size */
-#define CFG_NS16550_COM1	0x01c20000	/* Base address of UART0 */
-#define CFG_NS16550_CLK		27000000	/* Input clock to NS16550 */
+#define CONFIG_SYS_NS16550
+#define CONFIG_SYS_NS16550_SERIAL
+#define CONFIG_SYS_NS16550_REG_SIZE	4		/* NS16550 register size */
+#define CONFIG_SYS_NS16550_COM1	0x01c20000	/* Base address of UART0 */
+#define CONFIG_SYS_NS16550_CLK		27000000	/* Input clock to NS16550 */
 #define CONFIG_CONS_INDEX	1		/* use UART0 for console */
 #define CONFIG_BAUDRATE		115200		/* Default baud rate */
-#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
 /*===================*/
 /* I2C Configuration */
 /*===================*/
 #define CONFIG_HARD_I2C
 #define CONFIG_DRIVER_DAVINCI_I2C
-#define CFG_I2C_SPEED		80000	/* 100Kbps won't work, silicon bug */
-#define CFG_I2C_SLAVE		10	/* Bogus, master-only in U-Boot */
+#define CONFIG_SYS_I2C_SPEED		80000	/* 100Kbps won't work, silicon bug */
+#define CONFIG_SYS_I2C_SLAVE		10	/* Bogus, master-only in U-Boot */
 /*==================================*/
 /* Network & Ethernet Configuration */
 /*==================================*/
@@ -111,21 +111,21 @@
 /*=====================*/
 /* Flash & Environment */
 /*=====================*/
-#ifdef CFG_USE_NAND
-#undef CFG_ENV_IS_IN_FLASH
-#define CFG_NO_FLASH
-#define CFG_ENV_IS_IN_NAND		/* U-Boot env in NAND Flash  */
-#define CFG_ENV_SECT_SIZE	512	/* Env sector Size */
-#define CFG_ENV_SIZE		SZ_16K
+#ifdef CONFIG_SYS_USE_NAND
+#undef CONFIG_ENV_IS_IN_FLASH
+#define CONFIG_SYS_NO_FLASH
+#define CONFIG_ENV_IS_IN_NAND		/* U-Boot env in NAND Flash  */
+#define CONFIG_ENV_SECT_SIZE	512	/* Env sector Size */
+#define CONFIG_ENV_SIZE		SZ_16K
 #define CONFIG_SKIP_LOWLEVEL_INIT	/* U-Boot is loaded by a bootloader */
 #define CONFIG_SKIP_RELOCATE_UBOOT	/* to a proper address, init done */
-#define CFG_NAND_BASE		0x02000000
-#define CFG_NAND_HW_ECC
-#define CFG_MAX_NAND_DEVICE	1	/* Max number of NAND devices */
+#define CONFIG_SYS_NAND_BASE		0x02000000
+#define CONFIG_SYS_NAND_HW_ECC
+#define CONFIG_SYS_MAX_NAND_DEVICE	1	/* Max number of NAND devices */
 #define NAND_MAX_CHIPS		1
-#define CFG_ENV_OFFSET		0x0	/* Block 0--not used by bootcode */
+#define CONFIG_ENV_OFFSET		0x0	/* Block 0--not used by bootcode */
 #define DEF_BOOTM		""
-#elif defined(CFG_USE_NOR)
+#elif defined(CONFIG_SYS_USE_NOR)
 #ifdef CONFIG_NOR_UART_BOOT
 #define CONFIG_SKIP_LOWLEVEL_INIT	/* U-Boot is loaded by a bootloader */
 #define CONFIG_SKIP_RELOCATE_UBOOT	/* to a proper address, init done */
@@ -133,18 +133,18 @@
 #undef CONFIG_SKIP_LOWLEVEL_INIT
 #undef CONFIG_SKIP_RELOCATE_UBOOT
 #endif
-#define CFG_ENV_IS_IN_FLASH
-#undef CFG_NO_FLASH
+#define CONFIG_ENV_IS_IN_FLASH
+#undef CONFIG_SYS_NO_FLASH
 #define CONFIG_FLASH_CFI_DRIVER
-#define CFG_FLASH_CFI
-#define CFG_MAX_FLASH_BANKS	1		/* max number of flash banks */
-#define CFG_FLASH_SECT_SZ	0x20000		/* 128KB sect size AMD Flash */
-#define CFG_ENV_OFFSET		(CFG_FLASH_SECT_SZ*2)
+#define CONFIG_SYS_FLASH_CFI
+#define CONFIG_SYS_MAX_FLASH_BANKS	1		/* max number of flash banks */
+#define CONFIG_SYS_FLASH_SECT_SZ	0x20000		/* 128KB sect size AMD Flash */
+#define CONFIG_ENV_OFFSET		(CONFIG_SYS_FLASH_SECT_SZ*2)
 #define PHYS_FLASH_1		0x02000000	/* CS2 Base address	 */
-#define CFG_FLASH_BASE		PHYS_FLASH_1	/* Flash Base for U-Boot */
+#define CONFIG_SYS_FLASH_BASE		PHYS_FLASH_1	/* Flash Base for U-Boot */
 #define PHYS_FLASH_SIZE		0x2000000	/* Flash size 32MB	 */
-#define CFG_MAX_FLASH_SECT	(PHYS_FLASH_SIZE/CFG_FLASH_SECT_SZ)
-#define CFG_ENV_SECT_SIZE	CFG_FLASH_SECT_SZ	/* Env sector Size */
+#define CONFIG_SYS_MAX_FLASH_SECT	(PHYS_FLASH_SIZE/CONFIG_SYS_FLASH_SECT_SZ)
+#define CONFIG_ENV_SECT_SIZE	CONFIG_SYS_FLASH_SECT_SZ	/* Env sector Size */
 #endif
 /*==============================*/
 /* U-Boot general configuration */
@@ -153,18 +153,18 @@
 #define CONFIG_MISC_INIT_R
 #undef CONFIG_BOOTDELAY
 #define CONFIG_BOOTFILE		"uImage"	/* Boot file name */
-#define CFG_PROMPT		"U-Boot > "	/* Monitor Command Prompt */
-#define CFG_CBSIZE		1024		/* Console I/O Buffer Size  */
-#define CFG_PBSIZE		(CFG_CBSIZE+sizeof(CFG_PROMPT)+16)	/* Print buffer sz */
-#define CFG_MAXARGS		16		/* max number of command args */
-#define CFG_BARGSIZE		CFG_CBSIZE	/* Boot Argument Buffer Size */
-#define CFG_LOAD_ADDR		0x80700000	/* default Linux kernel load address */
+#define CONFIG_SYS_PROMPT		"U-Boot > "	/* Monitor Command Prompt */
+#define CONFIG_SYS_CBSIZE		1024		/* Console I/O Buffer Size  */
+#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)	/* Print buffer sz */
+#define CONFIG_SYS_MAXARGS		16		/* max number of command args */
+#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size */
+#define CONFIG_SYS_LOAD_ADDR		0x80700000	/* default Linux kernel load address */
 #define CONFIG_VERSION_VARIABLE
 #define CONFIG_AUTO_COMPLETE		/* Won't work with hush so far, may be later */
-#define CFG_HUSH_PARSER
-#define CFG_PROMPT_HUSH_PS2	"> "
+#define CONFIG_SYS_HUSH_PARSER
+#define CONFIG_SYS_PROMPT_HUSH_PS2	"> "
 #define CONFIG_CMDLINE_EDITING
-#define CFG_LONGHELP
+#define CONFIG_SYS_LONGHELP
 #define CONFIG_CRC32_VERIFY
 #define CONFIG_MX_CYCLIC
 /*===================*/
@@ -190,14 +190,14 @@
 #undef CONFIG_CMD_BDI
 #undef CONFIG_CMD_FPGA
 #undef CONFIG_CMD_SETGETDCR
-#ifdef CFG_USE_NAND
+#ifdef CONFIG_SYS_USE_NAND
 #undef CONFIG_CMD_FLASH
 #undef CONFIG_CMD_IMLS
 #define CONFIG_CMD_NAND
-#elif defined(CFG_USE_NOR)
+#elif defined(CONFIG_SYS_USE_NOR)
 #define CONFIG_CMD_JFFS2
 #else
-#error "Either CFG_USE_NAND or CFG_USE_NOR _MUST_ be defined !!!"
+#error "Either CONFIG_SYS_USE_NAND or CONFIG_SYS_USE_NOR _MUST_ be defined !!!"
 #endif
 /*=======================*/
 /* KGDB support (if any) */
diff --git a/include/configs/dbau1x00.h b/include/configs/dbau1x00.h
index 8941c5eb1..a578038b5 100644
--- a/include/configs/dbau1x00.h
+++ b/include/configs/dbau1x00.h
@@ -59,7 +59,7 @@
 #define CONFIG_BAUDRATE		115200
 
 /* valid baudrates */
-#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
 
 #define	CONFIG_TIMESTAMP		/* Print image info with timestamp */
 #undef	CONFIG_BOOTARGS
@@ -130,79 +130,79 @@
 /*
  * Miscellaneous configurable options
  */
-#define	CFG_LONGHELP				/* undef to save memory      */
+#define	CONFIG_SYS_LONGHELP				/* undef to save memory      */
 
-#define	CFG_PROMPT		"DbAu1xx0 # "	/* Monitor Command Prompt    */
+#define	CONFIG_SYS_PROMPT		"DbAu1xx0 # "	/* Monitor Command Prompt    */
 
-#define	CFG_CBSIZE		256		/* Console I/O Buffer Size   */
-#define	CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16)  /* Print Buffer Size */
-#define	CFG_MAXARGS		16		/* max number of command args*/
+#define	CONFIG_SYS_CBSIZE		256		/* Console I/O Buffer Size   */
+#define	CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)  /* Print Buffer Size */
+#define	CONFIG_SYS_MAXARGS		16		/* max number of command args*/
 
-#define CFG_MALLOC_LEN		128*1024
+#define CONFIG_SYS_MALLOC_LEN		128*1024
 
-#define CFG_BOOTPARAMS_LEN	128*1024
+#define CONFIG_SYS_BOOTPARAMS_LEN	128*1024
 
-#define CFG_MHZ			396
+#define CONFIG_SYS_MHZ			396
 
-#if (CFG_MHZ % 12) != 0
+#if (CONFIG_SYS_MHZ % 12) != 0
 #error "Invalid CPU frequency - must be multiple of 12!"
 #endif
 
-#define CFG_MIPS_TIMER_FREQ	(CFG_MHZ * 1000000)
+#define CONFIG_SYS_MIPS_TIMER_FREQ	(CONFIG_SYS_MHZ * 1000000)
 
-#define CFG_HZ			1000
+#define CONFIG_SYS_HZ			1000
 
-#define CFG_SDRAM_BASE		0x80000000     /* Cached addr */
+#define CONFIG_SYS_SDRAM_BASE		0x80000000     /* Cached addr */
 
-#define	CFG_LOAD_ADDR		0x81000000     /* default load address	*/
+#define	CONFIG_SYS_LOAD_ADDR		0x81000000     /* default load address	*/
 
-#define CFG_MEMTEST_START	0x80100000
-#define CFG_MEMTEST_END		0x80800000
+#define CONFIG_SYS_MEMTEST_START	0x80100000
+#define CONFIG_SYS_MEMTEST_END		0x80800000
 
 /*-----------------------------------------------------------------------
  * FLASH and environment organization
  */
 #ifdef CONFIG_DBAU1550
 
-#define CFG_MAX_FLASH_BANKS	2	/* max number of memory banks */
-#define CFG_MAX_FLASH_SECT	(512)	/* max number of sectors on one chip */
+#define CONFIG_SYS_MAX_FLASH_BANKS	2	/* max number of memory banks */
+#define CONFIG_SYS_MAX_FLASH_SECT	(512)	/* max number of sectors on one chip */
 
 #define PHYS_FLASH_1		0xb8000000 /* Flash Bank #1 */
 #define PHYS_FLASH_2		0xbc000000 /* Flash Bank #2 */
 
 #else /* CONFIG_DBAU1550 */
 
-#define CFG_MAX_FLASH_BANKS	2	/* max number of memory banks */
-#define CFG_MAX_FLASH_SECT	(128)	/* max number of sectors on one chip */
+#define CONFIG_SYS_MAX_FLASH_BANKS	2	/* max number of memory banks */
+#define CONFIG_SYS_MAX_FLASH_SECT	(128)	/* max number of sectors on one chip */
 
 #define PHYS_FLASH_1		0xbec00000 /* Flash Bank #1 */
 #define PHYS_FLASH_2		0xbfc00000 /* Flash Bank #2 */
 
 #endif /* CONFIG_DBAU1550 */
 
-#define CFG_FLASH_BANKS_LIST {PHYS_FLASH_1, PHYS_FLASH_2}
+#define CONFIG_SYS_FLASH_BANKS_LIST {PHYS_FLASH_1, PHYS_FLASH_2}
 
-#define CFG_FLASH_CFI           1
+#define CONFIG_SYS_FLASH_CFI           1
 #define CONFIG_FLASH_CFI_DRIVER    1
 
 /* The following #defines are needed to get flash environment right */
-#define	CFG_MONITOR_BASE	TEXT_BASE
-#define	CFG_MONITOR_LEN		(192 << 10)
+#define	CONFIG_SYS_MONITOR_BASE	TEXT_BASE
+#define	CONFIG_SYS_MONITOR_LEN		(192 << 10)
 
-#define CFG_INIT_SP_OFFSET	0x400000
+#define CONFIG_SYS_INIT_SP_OFFSET	0x400000
 
 /* We boot from this flash, selected with dip switch */
-#define CFG_FLASH_BASE		PHYS_FLASH_2
+#define CONFIG_SYS_FLASH_BASE		PHYS_FLASH_2
 
 /* timeout values are in ticks */
-#define CFG_FLASH_ERASE_TOUT	(2 * CFG_HZ) /* Timeout for Flash Erase */
-#define CFG_FLASH_WRITE_TOUT	(2 * CFG_HZ) /* Timeout for Flash Write */
+#define CONFIG_SYS_FLASH_ERASE_TOUT	(2 * CONFIG_SYS_HZ) /* Timeout for Flash Erase */
+#define CONFIG_SYS_FLASH_WRITE_TOUT	(2 * CONFIG_SYS_HZ) /* Timeout for Flash Write */
 
-#define	CFG_ENV_IS_NOWHERE	1
+#define	CONFIG_ENV_IS_NOWHERE	1
 
 /* Address and size of Primary Environment Sector	*/
-#define CFG_ENV_ADDR		0xB0030000
-#define CFG_ENV_SIZE		0x10000
+#define CONFIG_ENV_ADDR		0xB0030000
+#define CONFIG_ENV_SIZE		0x10000
 
 #define CONFIG_FLASH_16BIT
 
@@ -220,8 +220,8 @@
 
 #ifndef CONFIG_DBAU1550
 /*---ATA PCMCIA ------------------------------------*/
-#define CFG_PCMCIA_MEM_SIZE 0x4000000 /* Offset to slot 1 FIXME!!! */
-#define CFG_PCMCIA_MEM_ADDR 0x20000000
+#define CONFIG_SYS_PCMCIA_MEM_SIZE 0x4000000 /* Offset to slot 1 FIXME!!! */
+#define CONFIG_SYS_PCMCIA_MEM_ADDR 0x20000000
 #define CONFIG_PCMCIA_SLOT_A
 
 #define CONFIG_ATAPI 1
@@ -231,31 +231,31 @@
 #define CONFIG_IDE_PCMCIA 1
 
 /* We only support one slot for now */
-#define CFG_IDE_MAXBUS		1	/* max. 1 IDE bus		*/
-#define CFG_IDE_MAXDEVICE	1	/* max. 1 drive per IDE bus	*/
+#define CONFIG_SYS_IDE_MAXBUS		1	/* max. 1 IDE bus		*/
+#define CONFIG_SYS_IDE_MAXDEVICE	1	/* max. 1 drive per IDE bus	*/
 
 #undef	CONFIG_IDE_LED			/* LED   for ide not supported	*/
 #undef	CONFIG_IDE_RESET		/* reset for ide not supported	*/
 
-#define CFG_ATA_IDE0_OFFSET	0x0000
+#define CONFIG_SYS_ATA_IDE0_OFFSET	0x0000
 
-#define CFG_ATA_BASE_ADDR       CFG_PCMCIA_MEM_ADDR
+#define CONFIG_SYS_ATA_BASE_ADDR       CONFIG_SYS_PCMCIA_MEM_ADDR
 
 /* Offset for data I/O			*/
-#define CFG_ATA_DATA_OFFSET     8
+#define CONFIG_SYS_ATA_DATA_OFFSET     8
 
 /* Offset for normal register accesses  */
-#define CFG_ATA_REG_OFFSET      0
+#define CONFIG_SYS_ATA_REG_OFFSET      0
 
 /* Offset for alternate registers       */
-#define CFG_ATA_ALT_OFFSET      0x0100
+#define CONFIG_SYS_ATA_ALT_OFFSET      0x0100
 #endif /* CONFIG_DBAU1550 */
 
 /*-----------------------------------------------------------------------
  * Cache Configuration
  */
-#define CFG_DCACHE_SIZE		16384
-#define CFG_ICACHE_SIZE		16384
-#define CFG_CACHELINE_SIZE	32
+#define CONFIG_SYS_DCACHE_SIZE		16384
+#define CONFIG_SYS_ICACHE_SIZE		16384
+#define CONFIG_SYS_CACHELINE_SIZE	32
 
 #endif	/* __CONFIG_H */
diff --git a/include/configs/debris.h b/include/configs/debris.h
index 7667e5e60..4d65f6a44 100644
--- a/include/configs/debris.h
+++ b/include/configs/debris.h
@@ -76,7 +76,7 @@
 #define CONFIG_SERVERIP	192.168.0.1
 
 /* autoload */
-#undef CFG_AUTOLOAD
+#undef CONFIG_SYS_AUTOLOAD
 
 /* rootpath */
 #define CONFIG_ROOTPATH /tftpboot/target
@@ -156,14 +156,14 @@
 /*
  * Miscellaneous configurable options
  */
-#define CFG_LONGHELP		1		/* undef to save memory		*/
-#define CFG_PROMPT		"=> "		/* Monitor Command Prompt	*/
-#define CFG_CBSIZE		256		/* Console I/O Buffer Size	*/
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16)	/* Print Buffer Size	*/
-#define CFG_MAXARGS		16		/* max number of command args	*/
-#define CFG_BARGSIZE		CFG_CBSIZE	/* Boot Argument Buffer Size	*/
-#define CFG_LOAD_ADDR		0x00100000	/* default load address		*/
-#define CFG_HZ			1000		/* decrementer freq: 1 ms ticks */
+#define CONFIG_SYS_LONGHELP		1		/* undef to save memory		*/
+#define CONFIG_SYS_PROMPT		"=> "		/* Monitor Command Prompt	*/
+#define CONFIG_SYS_CBSIZE		256		/* Console I/O Buffer Size	*/
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)	/* Print Buffer Size	*/
+#define CONFIG_SYS_MAXARGS		16		/* max number of command args	*/
+#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
+#define CONFIG_SYS_LOAD_ADDR		0x00100000	/* default load address		*/
+#define CONFIG_SYS_HZ			1000		/* decrementer freq: 1 ms ticks */
 
 /*-----------------------------------------------------------------------
  * PCI stuff
@@ -174,7 +174,7 @@
 
 #define CONFIG_NET_MULTI		/* Multi ethernet cards support */
 #define CONFIG_EEPRO100
-#define CFG_RX_ETH_BUFFER	8	/* use 8 rx buffer on eepro100  */
+#define CONFIG_SYS_RX_ETH_BUFFER	8	/* use 8 rx buffer on eepro100  */
 #define CONFIG_EEPRO100_SROM_WRITE
 
 #define PCI_ENET0_IOADDR	0x80000000
@@ -184,49 +184,49 @@
 /*-----------------------------------------------------------------------
  * Start addresses for the final memory configuration
  * (Set up by the startup code)
- * Please note that CFG_SDRAM_BASE _must_ start at 0
+ * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
  */
-#define CFG_SDRAM_BASE		0x00000000
-#define CFG_MAX_RAM_SIZE	0x20000000
+#define CONFIG_SYS_SDRAM_BASE		0x00000000
+#define CONFIG_SYS_MAX_RAM_SIZE	0x20000000
 #define CONFIG_VERY_BIG_RAM
 
-#define CFG_RESET_ADDRESS	0xFFF00100
+#define CONFIG_SYS_RESET_ADDRESS	0xFFF00100
 
 #if defined (USE_DINK32)
-#define CFG_MONITOR_LEN		0x00040000
-#define CFG_MONITOR_BASE	0x00090000
-#define CFG_RAMBOOT		1
-#define CFG_INIT_RAM_ADDR	(CFG_MONITOR_BASE + CFG_MONITOR_LEN)
-#define CFG_INIT_RAM_END	0x10000
-#define CFG_GBL_DATA_SIZE	256  /* size in bytes reserved for initial data */
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_MONITOR_LEN		0x00040000
+#define CONFIG_SYS_MONITOR_BASE	0x00090000
+#define CONFIG_SYS_RAMBOOT		1
+#define CONFIG_SYS_INIT_RAM_ADDR	(CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)
+#define CONFIG_SYS_INIT_RAM_END	0x10000
+#define CONFIG_SYS_GBL_DATA_SIZE	256  /* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 #else
-#undef	CFG_RAMBOOT
-#define CFG_MONITOR_LEN		0x00040000
-#define CFG_MONITOR_BASE	TEXT_BASE
+#undef	CONFIG_SYS_RAMBOOT
+#define CONFIG_SYS_MONITOR_LEN		0x00040000
+#define CONFIG_SYS_MONITOR_BASE	TEXT_BASE
 
-/*#define CFG_GBL_DATA_SIZE    256*/
-#define CFG_GBL_DATA_SIZE	128
+/*#define CONFIG_SYS_GBL_DATA_SIZE    256*/
+#define CONFIG_SYS_GBL_DATA_SIZE	128
 
-#define CFG_INIT_RAM_ADDR     0x40000000
-#define CFG_INIT_RAM_END      0x1000
-#define CFG_GBL_DATA_OFFSET  (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_RAM_ADDR     0x40000000
+#define CONFIG_SYS_INIT_RAM_END      0x1000
+#define CONFIG_SYS_GBL_DATA_OFFSET  (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
 
 #endif
 
-#define CFG_FLASH_BASE		0x7C000000
-#define CFG_FLASH_SIZE		(16*1024*1024)	/* debris has tiny eeprom	*/
+#define CONFIG_SYS_FLASH_BASE		0x7C000000
+#define CONFIG_SYS_FLASH_SIZE		(16*1024*1024)	/* debris has tiny eeprom	*/
 
-#define CFG_MALLOC_LEN		(512 << 10)	/* Reserve 512 kB for malloc()	*/
+#define CONFIG_SYS_MALLOC_LEN		(512 << 10)	/* Reserve 512 kB for malloc()	*/
 
-#define CFG_MEMTEST_START	0x00000000	/* memtest works on		*/
-#define CFG_MEMTEST_END		0x04000000	/* 0 ... 32 MB in DRAM		*/
+#define CONFIG_SYS_MEMTEST_START	0x00000000	/* memtest works on		*/
+#define CONFIG_SYS_MEMTEST_END		0x04000000	/* 0 ... 32 MB in DRAM		*/
 
-#define CFG_EUMB_ADDR		0xFC000000
+#define CONFIG_SYS_EUMB_ADDR		0xFC000000
 
-#define CFG_FLASH_RANGE_BASE	0xFF000000	/* flash memory address range	*/
-#define CFG_FLASH_RANGE_SIZE	0x01000000
+#define CONFIG_SYS_FLASH_RANGE_BASE	0xFF000000	/* flash memory address range	*/
+#define CONFIG_SYS_FLASH_RANGE_SIZE	0x01000000
 #define FLASH_BASE0_PRELIM	0x7C000000	/* debris flash		*/
 
 /*
@@ -251,20 +251,20 @@
 #define MTDPARTS_DEFAULT	"mtdparts=debris-0:-(jffs2)"
 */
 
-#define CFG_ENV_IS_IN_NVRAM      1
+#define CONFIG_ENV_IS_IN_NVRAM      1
 #define CONFIG_ENV_OVERWRITE     1
-#define CFG_NVRAM_ACCESS_ROUTINE 1
-#define CFG_ENV_ADDR		0xFF000000 /* right at the start of NVRAM  */
-#define CFG_ENV_SIZE		0x400	/* Size of the Environment - 8K	   */
-#define CFG_ENV_OFFSET		0	/* starting right at the beginning */
+#define CONFIG_SYS_NVRAM_ACCESS_ROUTINE 1
+#define CONFIG_ENV_ADDR		0xFF000000 /* right at the start of NVRAM  */
+#define CONFIG_ENV_SIZE		0x400	/* Size of the Environment - 8K	   */
+#define CONFIG_ENV_OFFSET		0	/* starting right at the beginning */
 
-#define CFG_NVRAM_BASE_ADDR	0xff000000
+#define CONFIG_SYS_NVRAM_BASE_ADDR	0xff000000
 
 /*
- * CFG_NVRAM_BASE_ADDR + CFG_NVRAM_VXWORKS_OFFS =
+ * CONFIG_SYS_NVRAM_BASE_ADDR + CONFIG_SYS_NVRAM_VXWORKS_OFFS =
  * NV_RAM_ADDRS + NV_BOOT_OFFSET + NV_ENET_OFFSET
  */
-#define CFG_NVRAM_VXWORKS_OFFS	0x6900
+#define CONFIG_SYS_NVRAM_VXWORKS_OFFS	0x6900
 
 /*
  * select i2c support configuration
@@ -275,8 +275,8 @@
  */
 #define CONFIG_HARD_I2C		1		/* To enable I2C support	*/
 #undef  CONFIG_SOFT_I2C				/* I2C bit-banged		*/
-#define CFG_I2C_SPEED		400000		/* I2C speed and slave address	*/
-#define CFG_I2C_SLAVE		0x7F
+#define CONFIG_SYS_I2C_SPEED		400000		/* I2C speed and slave address	*/
+#define CONFIG_SYS_I2C_SLAVE		0x7F
 
 #ifdef CONFIG_SOFT_I2C
 #error "Soft I2C is not configured properly.  Please review!"
@@ -291,13 +291,13 @@
 #define I2C_DELAY		udelay(5)	/* 1/4 I2C clock duration */
 #endif /* CONFIG_SOFT_I2C */
 
-#define CFG_I2C_EEPROM_ADDR	0x57		/* EEPROM IS24C02		*/
-#define CFG_I2C_EEPROM_ADDR_LEN	1		/* Bytes of address		*/
-#define CFG_EEPROM_PAGE_WRITE_BITS	3
-#define CFG_EEPROM_PAGE_WRITE_DELAY_MS	10	/* and takes up to 10 msec */
+#define CONFIG_SYS_I2C_EEPROM_ADDR	0x57		/* EEPROM IS24C02		*/
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN	1		/* Bytes of address		*/
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS	3
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	10	/* and takes up to 10 msec */
 
-#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
-#define CFG_FLASH_BANKS		{ FLASH_BASE0_PRELIM }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+#define CONFIG_SYS_FLASH_BANKS		{ FLASH_BASE0_PRELIM }
 
 /*-----------------------------------------------------------------------
  * Definitions for initial stack pointer and data area (in DPRAM)
@@ -306,17 +306,17 @@
 /*
  * NS16550 Configuration
  */
-#define CFG_NS16550
-#define CFG_NS16550_SERIAL
+#define CONFIG_SYS_NS16550
+#define CONFIG_SYS_NS16550_SERIAL
 
-#define CFG_NS16550_REG_SIZE	1
+#define CONFIG_SYS_NS16550_REG_SIZE	1
 
-#define CFG_NS16550_CLK		7372800
+#define CONFIG_SYS_NS16550_CLK		7372800
 
-#define CFG_NS16550_COM1	0xFF080000
-#define CFG_NS16550_COM2	(CFG_NS16550_COM1 + 8)
-#define CFG_NS16550_COM3	(CFG_NS16550_COM1 + 16)
-#define CFG_NS16550_COM4	(CFG_NS16550_COM1 + 24)
+#define CONFIG_SYS_NS16550_COM1	0xFF080000
+#define CONFIG_SYS_NS16550_COM2	(CONFIG_SYS_NS16550_COM1 + 8)
+#define CONFIG_SYS_NS16550_COM3	(CONFIG_SYS_NS16550_COM1 + 16)
+#define CONFIG_SYS_NS16550_COM4	(CONFIG_SYS_NS16550_COM1 + 24)
 
 /*
  * Low Level Configuration Settings
@@ -327,32 +327,32 @@
 #define CONFIG_SYS_CLK_FREQ  33333333	/* external frequency to pll */
 #define CONFIG_PLL_PCI_TO_MEM_MULTIPLIER 3
 
-#define CFG_DLL_EXTEND		0x00
-#define CFG_PCI_HOLD_DEL	0x20
+#define CONFIG_SYS_DLL_EXTEND		0x00
+#define CONFIG_SYS_PCI_HOLD_DEL	0x20
 
-#define CFG_ROMNAL	15	/* rom/flash next access time */
-#define CFG_ROMFAL	31	/* rom/flash access time */
+#define CONFIG_SYS_ROMNAL	15	/* rom/flash next access time */
+#define CONFIG_SYS_ROMFAL	31	/* rom/flash access time */
 
-#define CFG_REFINT	430	/* # of clocks between CBR refresh cycles */
+#define CONFIG_SYS_REFINT	430	/* # of clocks between CBR refresh cycles */
 
-#define CFG_DBUS_SIZE2	1	/* set for 8-bit RCS1, clear for 32,64 */
+#define CONFIG_SYS_DBUS_SIZE2	1	/* set for 8-bit RCS1, clear for 32,64 */
 
 /* the following are for SDRAM only*/
-#define CFG_BSTOPRE	121	/* Burst To Precharge, sets open page interval */
-#define CFG_REFREC	8	/* Refresh to activate interval		*/
-#define CFG_RDLAT	4	/* data latency from read command	*/
-#define CFG_PRETOACT	3	/* Precharge to activate interval	*/
-#define CFG_ACTTOPRE	5	/* Activate to Precharge interval	*/
-#define CFG_ACTORW		3	/* Activate to R/W			*/
-#define CFG_SDMODE_CAS_LAT	3	/* SDMODE CAS latency			*/
-#define CFG_SDMODE_WRAP		0	/* SDMODE wrap type			*/
+#define CONFIG_SYS_BSTOPRE	121	/* Burst To Precharge, sets open page interval */
+#define CONFIG_SYS_REFREC	8	/* Refresh to activate interval		*/
+#define CONFIG_SYS_RDLAT	4	/* data latency from read command	*/
+#define CONFIG_SYS_PRETOACT	3	/* Precharge to activate interval	*/
+#define CONFIG_SYS_ACTTOPRE	5	/* Activate to Precharge interval	*/
+#define CONFIG_SYS_ACTORW		3	/* Activate to R/W			*/
+#define CONFIG_SYS_SDMODE_CAS_LAT	3	/* SDMODE CAS latency			*/
+#define CONFIG_SYS_SDMODE_WRAP		0	/* SDMODE wrap type			*/
 #if 0
-#define CFG_SDMODE_BURSTLEN	2	/* OBSOLETE!  SDMODE Burst length 2=4, 3=8		*/
+#define CONFIG_SYS_SDMODE_BURSTLEN	2	/* OBSOLETE!  SDMODE Burst length 2=4, 3=8		*/
 #endif
 
-#define CFG_REGISTERD_TYPE_BUFFER   1
-#define CFG_EXTROM 1
-#define CFG_REGDIMM 0
+#define CONFIG_SYS_REGISTERD_TYPE_BUFFER   1
+#define CONFIG_SYS_EXTROM 1
+#define CONFIG_SYS_REGDIMM 0
 
 
 /* memory bank settings*/
@@ -362,93 +362,93 @@
  * bits will be set to 0x00000 for a start address, or 0xfffff for an
  * end address
  */
-#define CFG_BANK0_START		0x00000000
-#define CFG_BANK0_END		(0x4000000 - 1)
-#define CFG_BANK0_ENABLE	1
-#define CFG_BANK1_START		0x04000000
-#define CFG_BANK1_END		(0x8000000 - 1)
-#define CFG_BANK1_ENABLE	1
-#define CFG_BANK2_START		0x3ff00000
-#define CFG_BANK2_END		0x3fffffff
-#define CFG_BANK2_ENABLE	0
-#define CFG_BANK3_START		0x3ff00000
-#define CFG_BANK3_END		0x3fffffff
-#define CFG_BANK3_ENABLE	0
-#define CFG_BANK4_START		0x00000000
-#define CFG_BANK4_END		0x00000000
-#define CFG_BANK4_ENABLE	0
-#define CFG_BANK5_START		0x00000000
-#define CFG_BANK5_END		0x00000000
-#define CFG_BANK5_ENABLE	0
-#define CFG_BANK6_START		0x00000000
-#define CFG_BANK6_END		0x00000000
-#define CFG_BANK6_ENABLE	0
-#define CFG_BANK7_START		0x00000000
-#define CFG_BANK7_END		0x00000000
-#define CFG_BANK7_ENABLE	0
+#define CONFIG_SYS_BANK0_START		0x00000000
+#define CONFIG_SYS_BANK0_END		(0x4000000 - 1)
+#define CONFIG_SYS_BANK0_ENABLE	1
+#define CONFIG_SYS_BANK1_START		0x04000000
+#define CONFIG_SYS_BANK1_END		(0x8000000 - 1)
+#define CONFIG_SYS_BANK1_ENABLE	1
+#define CONFIG_SYS_BANK2_START		0x3ff00000
+#define CONFIG_SYS_BANK2_END		0x3fffffff
+#define CONFIG_SYS_BANK2_ENABLE	0
+#define CONFIG_SYS_BANK3_START		0x3ff00000
+#define CONFIG_SYS_BANK3_END		0x3fffffff
+#define CONFIG_SYS_BANK3_ENABLE	0
+#define CONFIG_SYS_BANK4_START		0x00000000
+#define CONFIG_SYS_BANK4_END		0x00000000
+#define CONFIG_SYS_BANK4_ENABLE	0
+#define CONFIG_SYS_BANK5_START		0x00000000
+#define CONFIG_SYS_BANK5_END		0x00000000
+#define CONFIG_SYS_BANK5_ENABLE	0
+#define CONFIG_SYS_BANK6_START		0x00000000
+#define CONFIG_SYS_BANK6_END		0x00000000
+#define CONFIG_SYS_BANK6_ENABLE	0
+#define CONFIG_SYS_BANK7_START		0x00000000
+#define CONFIG_SYS_BANK7_END		0x00000000
+#define CONFIG_SYS_BANK7_ENABLE	0
 /*
  * Memory bank enable bitmask, specifying which of the banks defined above
  are actually present. MSB is for bank #7, LSB is for bank #0.
  */
-#define CFG_BANK_ENABLE		0x01
+#define CONFIG_SYS_BANK_ENABLE		0x01
 
-#define CFG_ODCR		0x75	/* configures line driver impedances,	*/
+#define CONFIG_SYS_ODCR		0x75	/* configures line driver impedances,	*/
 					/* see 8240 book for bit definitions	*/
-#define CFG_PGMAX		0x32	/* how long the 8240 retains the	*/
+#define CONFIG_SYS_PGMAX		0x32	/* how long the 8240 retains the	*/
 					/* currently accessed page in memory	*/
 					/* see 8240 book for details		*/
 
 /* SDRAM 0 - 256MB */
-#define CFG_IBAT0L	(CFG_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
-#define CFG_IBAT0U	(CFG_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CONFIG_SYS_IBAT0L	(CONFIG_SYS_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
+#define CONFIG_SYS_IBAT0U	(CONFIG_SYS_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
 
 /* stack in DCACHE @ 1GB (no backing mem) */
 #if defined(USE_DINK32)
-#define CFG_IBAT1L	(0x40000000 | BATL_PP_00 )
-#define CFG_IBAT1U	(0x40000000 | BATU_BL_128K )
+#define CONFIG_SYS_IBAT1L	(0x40000000 | BATL_PP_00 )
+#define CONFIG_SYS_IBAT1U	(0x40000000 | BATU_BL_128K )
 #else
-#define CFG_IBAT1L	(CFG_INIT_RAM_ADDR | BATL_PP_10 | BATL_MEMCOHERENCE)
-#define CFG_IBAT1U	(CFG_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP)
+#define CONFIG_SYS_IBAT1L	(CONFIG_SYS_INIT_RAM_ADDR | BATL_PP_10 | BATL_MEMCOHERENCE)
+#define CONFIG_SYS_IBAT1U	(CONFIG_SYS_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP)
 #endif
 
 /* PCI memory */
-#define CFG_IBAT2L	(0x80000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
-#define CFG_IBAT2U	(0x80000000 | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CONFIG_SYS_IBAT2L	(0x80000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
+#define CONFIG_SYS_IBAT2U	(0x80000000 | BATU_BL_256M | BATU_VS | BATU_VP)
 
 /* Flash, config addrs, etc */
-#define CFG_IBAT3L	(0xF0000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
-#define CFG_IBAT3U	(0xF0000000 | BATU_BL_256M | BATU_VS | BATU_VP)
-
-#define CFG_DBAT0L	CFG_IBAT0L
-#define CFG_DBAT0U	CFG_IBAT0U
-#define CFG_DBAT1L	CFG_IBAT1L
-#define CFG_DBAT1U	CFG_IBAT1U
-#define CFG_DBAT2L	CFG_IBAT2L
-#define CFG_DBAT2U	CFG_IBAT2U
-#define CFG_DBAT3L	CFG_IBAT3L
-#define CFG_DBAT3U	CFG_IBAT3U
+#define CONFIG_SYS_IBAT3L	(0xF0000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
+#define CONFIG_SYS_IBAT3U	(0xF0000000 | BATU_BL_256M | BATU_VS | BATU_VP)
+
+#define CONFIG_SYS_DBAT0L	CONFIG_SYS_IBAT0L
+#define CONFIG_SYS_DBAT0U	CONFIG_SYS_IBAT0U
+#define CONFIG_SYS_DBAT1L	CONFIG_SYS_IBAT1L
+#define CONFIG_SYS_DBAT1U	CONFIG_SYS_IBAT1U
+#define CONFIG_SYS_DBAT2L	CONFIG_SYS_IBAT2L
+#define CONFIG_SYS_DBAT2U	CONFIG_SYS_IBAT2U
+#define CONFIG_SYS_DBAT3L	CONFIG_SYS_IBAT3L
+#define CONFIG_SYS_DBAT3U	CONFIG_SYS_IBAT3U
 
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
+#define CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
 /*-----------------------------------------------------------------------
  * FLASH organization
  */
-#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
-#define CFG_MAX_FLASH_SECT	256	/* max number of sectors on one chip	*/
+#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
+#define CONFIG_SYS_MAX_FLASH_SECT	256	/* max number of sectors on one chip	*/
 
-#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
-#define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
+#define CONFIG_SYS_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
+#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
 
 /*-----------------------------------------------------------------------
  * Cache Configuration
  */
-#define CFG_CACHELINE_SIZE	32	/* For MPC8240 CPU			*/
+#define CONFIG_SYS_CACHELINE_SIZE	32	/* For MPC8240 CPU			*/
 #if defined(CONFIG_CMD_KGDB)
-#  define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value */
+#  define CONFIG_SYS_CACHELINE_SHIFT	5	/* log base 2 of the above value */
 #endif
 
 
diff --git a/include/configs/delta.h b/include/configs/delta.h
index 1db962aaf..08b28ca8a 100644
--- a/include/configs/delta.h
+++ b/include/configs/delta.h
@@ -43,8 +43,8 @@
 /*
  * Size of malloc() pool
  */
-#define CFG_MALLOC_LEN	    (CFG_ENV_SIZE + 256*1024)
-#define CFG_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
+#define CONFIG_SYS_MALLOC_LEN	    (CONFIG_ENV_SIZE + 256*1024)
+#define CONFIG_SYS_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
 
 /*
  * Hardware drivers
@@ -59,11 +59,11 @@
 #endif
 
 #define CONFIG_HARD_I2C		1	/* required for DA9030 access */
-#define CFG_I2C_SPEED		400000	/* I2C speed */
-#define CFG_I2C_SLAVE		1	/* I2C controllers address */
+#define CONFIG_SYS_I2C_SPEED		400000	/* I2C speed */
+#define CONFIG_SYS_I2C_SLAVE		1	/* I2C controllers address */
 #define DA9030_I2C_ADDR		0x49	/* I2C address of DA9030 */
-#define CFG_DA9030_EXTON_DELAY	100000	/* wait x us after DA9030 reset via EXTON */
-#define CFG_I2C_INIT_BOARD	1
+#define CONFIG_SYS_DA9030_EXTON_DELAY	100000	/* wait x us after DA9030 reset via EXTON */
+#define CONFIG_SYS_I2C_INIT_BOARD	1
 /* #define CONFIG_HW_WATCHDOG	1	/\* Required for hitting the DA9030 WD *\/ */
 
 #define DELTA_CHECK_KEYBD	1	/* check for keys pressed during boot */
@@ -125,11 +125,11 @@
 
 #include <asm/arch/pxa-regs.h> /* for OHCI_REGS_BASE */
 
-#undef CFG_USB_OHCI_BOARD_INIT
-#define CFG_USB_OHCI_CPU_INIT	1
-#define CFG_USB_OHCI_REGS_BASE	OHCI_REGS_BASE
-#define CFG_USB_OHCI_SLOT_NAME	"delta"
-#define CFG_USB_OHCI_MAX_ROOT_PORTS	3
+#undef CONFIG_SYS_USB_OHCI_BOARD_INIT
+#define CONFIG_SYS_USB_OHCI_CPU_INIT	1
+#define CONFIG_SYS_USB_OHCI_REGS_BASE	OHCI_REGS_BASE
+#define CONFIG_SYS_USB_OHCI_SLOT_NAME	"delta"
+#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS	3
 
 #define LITTLEENDIAN            1       /* used by usb_ohci.c  */
 
@@ -151,39 +151,39 @@
 /*
  * Miscellaneous configurable options
  */
-#define CFG_HUSH_PARSER		1
-#define CFG_PROMPT_HUSH_PS2	"> "
+#define CONFIG_SYS_HUSH_PARSER		1
+#define CONFIG_SYS_PROMPT_HUSH_PS2	"> "
 
-#define CFG_LONGHELP				/* undef to save memory		*/
-#ifdef CFG_HUSH_PARSER
-#define CFG_PROMPT		"$ "		/* Monitor Command Prompt */
+#define CONFIG_SYS_LONGHELP				/* undef to save memory		*/
+#ifdef CONFIG_SYS_HUSH_PARSER
+#define CONFIG_SYS_PROMPT		"$ "		/* Monitor Command Prompt */
 #else
-#define CFG_PROMPT		"=> "		/* Monitor Command Prompt */
+#define CONFIG_SYS_PROMPT		"=> "		/* Monitor Command Prompt */
 #endif
-#define CFG_CBSIZE		256		/* Console I/O Buffer Size	*/
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define CFG_MAXARGS		16		/* max number of command args	*/
-#define CFG_BARGSIZE		CFG_CBSIZE	/* Boot Argument Buffer Size	*/
-#define CFG_DEVICE_NULLDEV	1
+#define CONFIG_SYS_CBSIZE		256		/* Console I/O Buffer Size	*/
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS		16		/* max number of command args	*/
+#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
+#define CONFIG_SYS_DEVICE_NULLDEV	1
 
-#define CFG_MEMTEST_START	0x80400000	/* memtest works on	*/
-#define CFG_MEMTEST_END		0x80800000	/* 4 ... 8 MB in DRAM	*/
+#define CONFIG_SYS_MEMTEST_START	0x80400000	/* memtest works on	*/
+#define CONFIG_SYS_MEMTEST_END		0x80800000	/* 4 ... 8 MB in DRAM	*/
 
-#undef	CFG_CLKS_IN_HZ		/* everything, incl board info, in Hz */
+#undef	CONFIG_SYS_CLKS_IN_HZ		/* everything, incl board info, in Hz */
 
-#define CFG_LOAD_ADDR	(CFG_DRAM_BASE + 0x8000) /* default load address */
+#define CONFIG_SYS_LOAD_ADDR	(CONFIG_SYS_DRAM_BASE + 0x8000) /* default load address */
 
-#define CFG_HZ			3250000		/* incrementer freq: 3.25 MHz */
+#define CONFIG_SYS_HZ			3250000		/* incrementer freq: 3.25 MHz */
 
 /* Monahans Core Frequency */
-#define CFG_MONAHANS_RUN_MODE_OSC_RATIO		16 /* valid values: 8, 16, 24, 31 */
-#define CFG_MONAHANS_TURBO_RUN_MODE_RATIO	1  /* valid values: 1, 2 */
+#define CONFIG_SYS_MONAHANS_RUN_MODE_OSC_RATIO		16 /* valid values: 8, 16, 24, 31 */
+#define CONFIG_SYS_MONAHANS_TURBO_RUN_MODE_RATIO	1  /* valid values: 1, 2 */
 
 
 						/* valid baudrates */
-#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
 
-/* #define CFG_MMC_BASE		0xF0000000 */
+/* #define CONFIG_SYS_MMC_BASE		0xF0000000 */
 
 /*
  * Stack sizes
@@ -209,26 +209,26 @@
 #define PHYS_SDRAM_4		0x83000000 /* SDRAM Bank #4 */
 #define PHYS_SDRAM_4_SIZE	0x1000000  /* 64 MB */
 
-#define CFG_DRAM_BASE		0x80000000 /* at CS0 */
-#define CFG_DRAM_SIZE		0x04000000 /* 64 MB Ram */
+#define CONFIG_SYS_DRAM_BASE		0x80000000 /* at CS0 */
+#define CONFIG_SYS_DRAM_SIZE		0x04000000 /* 64 MB Ram */
 
-#undef CFG_SKIP_DRAM_SCRUB
+#undef CONFIG_SYS_SKIP_DRAM_SCRUB
 
 /*
  * NAND Flash
  */
 #undef CONFIG_NAND_LEGACY
 
-#define CFG_NAND0_BASE		0x0 /* 0x43100040 */ /* 0x10000000 */
-#undef CFG_NAND1_BASE
+#define CONFIG_SYS_NAND0_BASE		0x0 /* 0x43100040 */ /* 0x10000000 */
+#undef CONFIG_SYS_NAND1_BASE
 
-#define CFG_NAND_BASE_LIST	{ CFG_NAND0_BASE }
-#define CFG_MAX_NAND_DEVICE	1	/* Max number of NAND devices */
+#define CONFIG_SYS_NAND_BASE_LIST	{ CONFIG_SYS_NAND0_BASE }
+#define CONFIG_SYS_MAX_NAND_DEVICE	1	/* Max number of NAND devices */
 
 /* nand timeout values */
-#define CFG_NAND_PROG_ERASE_TO	3000
-#define CFG_NAND_OTHER_TO	100
-#define CFG_NAND_SENDCMD_RETRY	3
+#define CONFIG_SYS_NAND_PROG_ERASE_TO	3000
+#define CONFIG_SYS_NAND_OTHER_TO	100
+#define CONFIG_SYS_NAND_SENDCMD_RETRY	3
 #undef NAND_ALLOW_ERASE_ALL	/* Allow erasing bad blocks - don't use */
 
 /* NAND Timing Parameters (in ns) */
@@ -245,9 +245,9 @@
 #define NAND_TIMING_tAR		10
 
 /* NAND debugging */
-#define CFG_DFC_DEBUG1 /* usefull */
-#undef CFG_DFC_DEBUG2  /* noisy */
-#undef CFG_DFC_DEBUG3  /* extremly noisy  */
+#define CONFIG_SYS_DFC_DEBUG1 /* usefull */
+#undef CONFIG_SYS_DFC_DEBUG2  /* noisy */
+#undef CONFIG_SYS_DFC_DEBUG3  /* extremly noisy  */
 
 #define CONFIG_MTD_DEBUG
 #define CONFIG_MTD_DEBUG_VERBOSE 1
@@ -260,11 +260,11 @@
 #define NAND_MAX_FLOORS		1
 #define NAND_MAX_CHIPS		1
 
-#define CFG_NO_FLASH		1
+#define CONFIG_SYS_NO_FLASH		1
 
-#define CFG_ENV_IS_IN_NAND	1
-#define CFG_ENV_OFFSET		0x40000
-#define CFG_ENV_OFFSET_REDUND	0x44000
-#define CFG_ENV_SIZE		0x4000
+#define CONFIG_ENV_IS_IN_NAND	1
+#define CONFIG_ENV_OFFSET		0x40000
+#define CONFIG_ENV_OFFSET_REDUND	0x44000
+#define CONFIG_ENV_SIZE		0x4000
 
 #endif	/* __CONFIG_H */
diff --git a/include/configs/dnp1110.h b/include/configs/dnp1110.h
index e7873e95f..e329fd3a0 100644
--- a/include/configs/dnp1110.h
+++ b/include/configs/dnp1110.h
@@ -46,8 +46,8 @@
 /*
  * Size of malloc() pool
  */
-#define CFG_MALLOC_LEN		(CFG_ENV_SIZE + 128*1024)
-#define CFG_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
+#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + 128*1024)
+#define CONFIG_SYS_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
 
 /*
  * Hardware drivers
@@ -99,25 +99,25 @@
 /*
  * Miscellaneous configurable options
  */
-#define	CFG_LONGHELP				/* undef to save memory		*/
-#define	CFG_PROMPT		"DNP1110 # "	/* Monitor Command Prompt	*/
-#define	CFG_CBSIZE		256		/* Console I/O Buffer Size	*/
-#define	CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define	CFG_MAXARGS		16		/* max number of command args	*/
-#define CFG_BARGSIZE		CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+#define	CONFIG_SYS_LONGHELP				/* undef to save memory		*/
+#define	CONFIG_SYS_PROMPT		"DNP1110 # "	/* Monitor Command Prompt	*/
+#define	CONFIG_SYS_CBSIZE		256		/* Console I/O Buffer Size	*/
+#define	CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define	CONFIG_SYS_MAXARGS		16		/* max number of command args	*/
+#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
 
-#define CFG_MEMTEST_START	0xc0400000	/* memtest works on	*/
-#define CFG_MEMTEST_END		0xc0800000	/* 4 ... 8 MB in DRAM	*/
+#define CONFIG_SYS_MEMTEST_START	0xc0400000	/* memtest works on	*/
+#define CONFIG_SYS_MEMTEST_END		0xc0800000	/* 4 ... 8 MB in DRAM	*/
 
-#undef  CFG_CLKS_IN_HZ		/* everything, incl board info, in Hz */
+#undef  CONFIG_SYS_CLKS_IN_HZ		/* everything, incl board info, in Hz */
 
-#define	CFG_LOAD_ADDR		0xc0200000	/* default load address	*/
+#define	CONFIG_SYS_LOAD_ADDR		0xc0200000	/* default load address	*/
 
-#define	CFG_HZ			3686400		/* incrementer freq: 3.6864 MHz */
-#define CFG_CPUSPEED		0x0b		/* set core clock to 220 MHz */
+#define	CONFIG_SYS_HZ			3686400		/* incrementer freq: 3.6864 MHz */
+#define CONFIG_SYS_CPUSPEED		0x0b		/* set core clock to 220 MHz */
 
 						/* valid baudrates */
-#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
 
 /*-----------------------------------------------------------------------
  * Stack sizes
@@ -143,20 +143,20 @@
 #define PHYS_FLASH_BANK_SIZE    0x01000000 /* 32 MB Banks */
 #define PHYS_FLASH_SECT_SIZE    0x00020000 /* 256 KB sectors (x2) */
 
-#define CFG_FLASH_BASE		PHYS_FLASH_1
+#define CONFIG_SYS_FLASH_BASE		PHYS_FLASH_1
 
 /*-----------------------------------------------------------------------
  * FLASH and environment organization
  */
-#define CFG_MAX_FLASH_BANKS	1		/* max number of memory banks		*/
-#define CFG_MAX_FLASH_SECT	128		/* max number of sectors on one chip	*/
+#define CONFIG_SYS_MAX_FLASH_BANKS	1		/* max number of memory banks		*/
+#define CONFIG_SYS_MAX_FLASH_SECT	128		/* max number of sectors on one chip	*/
 
 /* timeout values are in ticks */
-#define CFG_FLASH_ERASE_TOUT	(2*CFG_HZ) /* Timeout for Flash Erase */
-#define CFG_FLASH_WRITE_TOUT	(2*CFG_HZ) /* Timeout for Flash Write */
+#define CONFIG_SYS_FLASH_ERASE_TOUT	(2*CONFIG_SYS_HZ) /* Timeout for Flash Erase */
+#define CONFIG_SYS_FLASH_WRITE_TOUT	(2*CONFIG_SYS_HZ) /* Timeout for Flash Write */
 
-#define	CFG_ENV_IS_IN_FLASH	1
-#define CFG_ENV_ADDR			(PHYS_FLASH_1 + 0xF80000)	/* Addr of Environment Sector	*/
-#define CFG_ENV_SIZE			0x20000						/* Total Size of Environment Sector	*/
+#define	CONFIG_ENV_IS_IN_FLASH	1
+#define CONFIG_ENV_ADDR			(PHYS_FLASH_1 + 0xF80000)	/* Addr of Environment Sector	*/
+#define CONFIG_ENV_SIZE			0x20000						/* Total Size of Environment Sector	*/
 
 #endif	/* __CONFIG_H */
diff --git a/include/configs/eXalion.h b/include/configs/eXalion.h
index 6ba0d3fe5..fc3174c63 100644
--- a/include/configs/eXalion.h
+++ b/include/configs/eXalion.h
@@ -84,84 +84,84 @@
 /*-----------------------------------------------------------------------
  * Miscellaneous configurable options
  */
-#define CFG_LONGHELP		1	/* undef to save memory		*/
-#define CFG_PROMPT		"=> "	/* Monitor Command Prompt	*/
-#define CFG_CBSIZE		256	/* Console I/O Buffer Size	*/
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16)	/* Print Buffer Size	*/
-#define CFG_MAXARGS		8	/* max number of command args	*/
-#define CFG_BARGSIZE		CFG_CBSIZE	/* Boot Argument Buffer Size	*/
-#define CFG_LOAD_ADDR		0x00100000	/* default load address		*/
+#define CONFIG_SYS_LONGHELP		1	/* undef to save memory		*/
+#define CONFIG_SYS_PROMPT		"=> "	/* Monitor Command Prompt	*/
+#define CONFIG_SYS_CBSIZE		256	/* Console I/O Buffer Size	*/
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)	/* Print Buffer Size	*/
+#define CONFIG_SYS_MAXARGS		8	/* max number of command args	*/
+#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
+#define CONFIG_SYS_LOAD_ADDR		0x00100000	/* default load address		*/
 
-#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
 
 #define CONFIG_MISC_INIT_R	1
 
 /*-----------------------------------------------------------------------
  * Start addresses for the final memory configuration
  * (Set up by the startup code)
- * Please note that CFG_SDRAM_BASE _must_ start at 0
+ * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
  */
-#define CFG_SDRAM_BASE		0x00000000
-#define CFG_MAX_RAM_SIZE	0x10000000	/* 1 GBytes - initdram() will	   */
+#define CONFIG_SYS_SDRAM_BASE		0x00000000
+#define CONFIG_SYS_MAX_RAM_SIZE	0x10000000	/* 1 GBytes - initdram() will	   */
 					     /* return real value.		*/
 
-#define CFG_RESET_ADDRESS	0xFFF00100
+#define CONFIG_SYS_RESET_ADDRESS	0xFFF00100
 
-#undef	CFG_RAMBOOT
-#define CFG_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor	    */
-#define CFG_MONITOR_BASE	TEXT_BASE
+#undef	CONFIG_SYS_RAMBOOT
+#define CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor	    */
+#define CONFIG_SYS_MONITOR_BASE	TEXT_BASE
 
 /*-----------------------------------------------------------------------
  * Definitions for initial stack pointer and data area
  */
-#define CFG_INIT_DATA_SIZE	128
+#define CONFIG_SYS_INIT_DATA_SIZE	128
 
-#define CFG_INIT_RAM_ADDR	0x40000000
-#define CFG_INIT_RAM_END	0x1000
-#define CFG_INIT_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_INIT_DATA_SIZE)
+#define CONFIG_SYS_INIT_RAM_ADDR	0x40000000
+#define CONFIG_SYS_INIT_RAM_END	0x1000
+#define CONFIG_SYS_INIT_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_INIT_DATA_SIZE)
 
-#define CFG_GBL_DATA_SIZE	 256	/* size in bytes reserved for initial data */
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_GBL_DATA_SIZE	 256	/* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
 
 #if defined (CONFIG_MPC8240)
-#define CFG_FLASH_BASE	    0xFFE00000
-#define CFG_FLASH_SIZE	    (2 * 1024 * 1024)	/* onboard 2MByte flash	    */
+#define CONFIG_SYS_FLASH_BASE	    0xFFE00000
+#define CONFIG_SYS_FLASH_SIZE	    (2 * 1024 * 1024)	/* onboard 2MByte flash	    */
 #elif defined (CONFIG_MPC8245)
-#define CFG_FLASH_BASE	    0xFFC00000
-#define CFG_FLASH_SIZE	    (4 * 1024 * 1024)	/* onboard 4MByte flash	    */
+#define CONFIG_SYS_FLASH_BASE	    0xFFC00000
+#define CONFIG_SYS_FLASH_SIZE	    (4 * 1024 * 1024)	/* onboard 4MByte flash	    */
 #else
 #error Specific type of MPC824x must be defined (i.e. CONFIG_MPC8240)
 #endif
 
-#define CFG_ENV_IS_IN_FLASH	1
-#define CFG_ENV_SECT_SIZE	0x20000 /* Size of one Flash sector */
-#define CFG_ENV_SIZE		CFG_ENV_SECT_SIZE	/* Use one Flash sector for enviroment	*/
-#define CFG_ENV_ADDR		0xFFFC0000
-#define CFG_ENV_OFFSET		0	/* starting right at the beginning  */
+#define CONFIG_ENV_IS_IN_FLASH	1
+#define CONFIG_ENV_SECT_SIZE	0x20000 /* Size of one Flash sector */
+#define CONFIG_ENV_SIZE		CONFIG_ENV_SECT_SIZE	/* Use one Flash sector for enviroment	*/
+#define CONFIG_ENV_ADDR		0xFFFC0000
+#define CONFIG_ENV_OFFSET		0	/* starting right at the beginning  */
 
-#define CFG_MALLOC_LEN		(128 * 1024)	/* Reserve 128 kB for malloc()	*/
+#define CONFIG_SYS_MALLOC_LEN		(128 * 1024)	/* Reserve 128 kB for malloc()	*/
 
-#define CFG_ALT_MEMTEST		1	/* use real memory test	    */
-#define CFG_MEMTEST_START	0x00004000	/* memtest works on	    */
-#define CFG_MEMTEST_END		0x02000000	/* 0 ... 32 MB in DRAM	    */
+#define CONFIG_SYS_ALT_MEMTEST		1	/* use real memory test	    */
+#define CONFIG_SYS_MEMTEST_START	0x00004000	/* memtest works on	    */
+#define CONFIG_SYS_MEMTEST_END		0x02000000	/* 0 ... 32 MB in DRAM	    */
 
-#define CFG_EUMB_ADDR		0xFC000000
+#define CONFIG_SYS_EUMB_ADDR		0xFC000000
 
-/* #define CFG_ISA_MEM		   0xFD000000 */
-#define CFG_ISA_IO		0xFE000000
+/* #define CONFIG_SYS_ISA_MEM		   0xFD000000 */
+#define CONFIG_SYS_ISA_IO		0xFE000000
 
 /*-----------------------------------------------------------------------
  * FLASH organization
  */
-#define CFG_MAX_FLASH_BANKS	1	/* Max number of flash banks	    */
-#define CFG_MAX_FLASH_SECT	64	/* Max number of sectors per flash  */
+#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* Max number of flash banks	    */
+#define CONFIG_SYS_MAX_FLASH_SECT	64	/* Max number of sectors per flash  */
 
-#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms) */
-#define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms) */
+#define CONFIG_SYS_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms) */
+#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms) */
 
-#define FLASH_BASE0_PRELIM	CFG_FLASH_BASE
+#define FLASH_BASE0_PRELIM	CONFIG_SYS_FLASH_BASE
 #define FLASH_BASE1_PRELIM	0
 
 
@@ -169,13 +169,13 @@
  * FLASH and environment organization
  */
 
-#define CFG_FLASH_CFI		1	/* Flash is CFI conformant		*/
+#define CONFIG_SYS_FLASH_CFI		1	/* Flash is CFI conformant		*/
 #define CONFIG_FLASH_CFI_DRIVER	1	/* Use the common driver		*/
-#define CFG_MAX_FLASH_SECT	64	/* max number of sectors on one chip	*/
-#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
-#define CFG_FLASH_INCREMENT	0	/* there is only one bank		*/
-#define CFG_FLASH_PROTECTION	1	/* use hardware protection		*/
-#define CFG_FLASH_USE_BUFFER_WRITE 1	/* use buffered writes (20x faster)	*/
+#define CONFIG_SYS_MAX_FLASH_SECT	64	/* max number of sectors on one chip	*/
+#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
+#define CONFIG_SYS_FLASH_INCREMENT	0	/* there is only one bank		*/
+#define CONFIG_SYS_FLASH_PROTECTION	1	/* use hardware protection		*/
+#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1	/* use buffered writes (20x faster)	*/
 
 
 /*-----------------------------------------------------------------------
@@ -200,23 +200,23 @@
 /*-----------------------------------------------------------------------
  * NS16550 Configuration
  */
-#define CFG_NS16550		1
-#define CFG_NS16550_SERIAL	1
+#define CONFIG_SYS_NS16550		1
+#define CONFIG_SYS_NS16550_SERIAL	1
 
 #define CONFIG_CONS_INDEX	1
 #define CONFIG_BAUDRATE		38400
 
-#define CFG_NS16550_REG_SIZE	1
+#define CONFIG_SYS_NS16550_REG_SIZE	1
 
 #if (CONFIG_CONS_INDEX == 1)
-#define CFG_NS16550_CLK		1843200 /* COM1 only !	*/
+#define CONFIG_SYS_NS16550_CLK		1843200 /* COM1 only !	*/
 #else
-#define CFG_NS16550_CLK ({ extern ulong get_bus_freq (ulong); get_bus_freq (0); })
+#define CONFIG_SYS_NS16550_CLK ({ extern ulong get_bus_freq (ulong); get_bus_freq (0); })
 #endif
 
-#define CFG_NS16550_COM1	(CFG_ISA_IO + 0x3F8)
-#define CFG_NS16550_COM2	(CFG_EUMB_ADDR + 0x4500)
-#define CFG_NS16550_COM3	(CFG_EUMB_ADDR + 0x4600)
+#define CONFIG_SYS_NS16550_COM1	(CONFIG_SYS_ISA_IO + 0x3F8)
+#define CONFIG_SYS_NS16550_COM2	(CONFIG_SYS_EUMB_ADDR + 0x4500)
+#define CONFIG_SYS_NS16550_COM3	(CONFIG_SYS_EUMB_ADDR + 0x4600)
 
 /*-----------------------------------------------------------------------
  * select i2c support configuration
@@ -227,15 +227,15 @@
  */
 #define CONFIG_HARD_I2C		1	/* To enable I2C support	*/
 #undef	CONFIG_SOFT_I2C		/* I2C bit-banged		*/
-#define CFG_I2C_SPEED		400000	/* I2C speed and slave address	*/
-#define CFG_I2C_SLAVE		0x7F
+#define CONFIG_SYS_I2C_SPEED		400000	/* I2C speed and slave address	*/
+#define CONFIG_SYS_I2C_SLAVE		0x7F
 
 /*-----------------------------------------------------------------------
  * Low Level Configuration Settings
  * (address mappings, register initial values, etc.)
  * You should know what you are doing if you make changes here.
  */
-#define CFG_HZ			1000
+#define CONFIG_SYS_HZ			1000
 
 #define CONFIG_SYS_CLK_FREQ	33333333	/* external frequency to pll	*/
 #define CONFIG_PLL_PCI_TO_MEM_MULTIPLIER  2	/* for MPC8240 only		*/
@@ -245,76 +245,76 @@
 #if defined (CONFIG_MPC8245)
 /* Bit-field values for PMCR2.							*/
 #if defined (CONFIG_133MHZ_DRAM)
-#define CFG_DLL_EXTEND		0x80	/* use DLL extended range - 133MHz only */
-#define CFG_PCI_HOLD_DEL	0x20	/* delay and hold timing - 133MHz only	*/
+#define CONFIG_SYS_DLL_EXTEND		0x80	/* use DLL extended range - 133MHz only */
+#define CONFIG_SYS_PCI_HOLD_DEL	0x20	/* delay and hold timing - 133MHz only	*/
 #endif
 
 /* Bit-field values for MIOCR1.							*/
 #if !defined (CONFIG_133MHZ_DRAM)
-#define CFG_DLL_MAX_DELAY	0x04	/*  longer DLL delay line - 66MHz only	*/
+#define CONFIG_SYS_DLL_MAX_DELAY	0x04	/*  longer DLL delay line - 66MHz only	*/
 #endif
 /* Bit-field values for MIOCR2.							*/
-#define CFG_SDRAM_DSCD		0x20	/* SDRAM data in sample clock delay	*/
+#define CONFIG_SYS_SDRAM_DSCD		0x20	/* SDRAM data in sample clock delay	*/
 					/*	- note bottom 3 bits MUST be 0	*/
 #endif
 
 /* Bit-field values for MCCR1.							*/
-#define CFG_ROMNAL		7	/*rom/flash next access time		*/
-#define CFG_ROMFAL	       11	/*rom/flash access time			*/
+#define CONFIG_SYS_ROMNAL		7	/*rom/flash next access time		*/
+#define CONFIG_SYS_ROMFAL	       11	/*rom/flash access time			*/
 
 /* Bit-field values for MCCR2.							*/
-#define CFG_TSWAIT		0x5	/* Transaction Start Wait States timer	*/
+#define CONFIG_SYS_TSWAIT		0x5	/* Transaction Start Wait States timer	*/
 #if defined (CONFIG_133MHZ_DRAM)
-#define CFG_REFINT		1300	/* no of clock cycles between CBR	*/
+#define CONFIG_SYS_REFINT		1300	/* no of clock cycles between CBR	*/
 #else  /* refresh cycles */
-#define CFG_REFINT		750
+#define CONFIG_SYS_REFINT		750
 #endif
 
 /* Burst To Precharge. Bits of this value go to MCCR3 and MCCR4.		*/
 #if defined (CONFIG_133MHZ_DRAM)
-#define CFG_BSTOPRE		1023
+#define CONFIG_SYS_BSTOPRE		1023
 #else
-#define CFG_BSTOPRE		250
+#define CONFIG_SYS_BSTOPRE		250
 #endif
 
 /* Bit-field values for MCCR3.							*/
 /* the following are for SDRAM only						*/
 
 #if defined (CONFIG_133MHZ_DRAM)
-#define CFG_REFREC		9	/* Refresh to activate interval		*/
+#define CONFIG_SYS_REFREC		9	/* Refresh to activate interval		*/
 #else
-#define CFG_REFREC		5	/* Refresh to activate interval		*/
+#define CONFIG_SYS_REFREC		5	/* Refresh to activate interval		*/
 #endif
 #if defined (CONFIG_MPC8240)
-#define CFG_RDLAT		2	/* data latency from read command	*/
+#define CONFIG_SYS_RDLAT		2	/* data latency from read command	*/
 #endif
 
 /* Bit-field values for MCCR4.	*/
 #if defined (CONFIG_133MHZ_DRAM)
-#define CFG_PRETOACT		3	/* Precharge to activate interval	*/
-#define CFG_ACTTOPRE		7	/* Activate to Precharge interval	*/
-#define CFG_ACTORW		5	/* Activate to R/W			*/
-#define CFG_SDMODE_CAS_LAT	3	/* SDMODE CAS latency			*/
+#define CONFIG_SYS_PRETOACT		3	/* Precharge to activate interval	*/
+#define CONFIG_SYS_ACTTOPRE		7	/* Activate to Precharge interval	*/
+#define CONFIG_SYS_ACTORW		5	/* Activate to R/W			*/
+#define CONFIG_SYS_SDMODE_CAS_LAT	3	/* SDMODE CAS latency			*/
 #else
 #if 0
-#define CFG_PRETOACT		2	/* Precharge to activate interval	*/
-#define CFG_ACTTOPRE		3	/* Activate to Precharge interval	*/
-#define CFG_ACTORW		3	/* Activate to R/W			*/
-#define CFG_SDMODE_CAS_LAT	2	/* SDMODE CAS latency			*/
+#define CONFIG_SYS_PRETOACT		2	/* Precharge to activate interval	*/
+#define CONFIG_SYS_ACTTOPRE		3	/* Activate to Precharge interval	*/
+#define CONFIG_SYS_ACTORW		3	/* Activate to R/W			*/
+#define CONFIG_SYS_SDMODE_CAS_LAT	2	/* SDMODE CAS latency			*/
 #endif
-#define CFG_PRETOACT		2	/* Precharge to activate interval	*/
-#define CFG_ACTTOPRE		5	/* Activate to Precharge interval	*/
-#define CFG_ACTORW		3	/* Activate to R/W			*/
-#define CFG_SDMODE_CAS_LAT	3	/* SDMODE CAS latency			*/
+#define CONFIG_SYS_PRETOACT		2	/* Precharge to activate interval	*/
+#define CONFIG_SYS_ACTTOPRE		5	/* Activate to Precharge interval	*/
+#define CONFIG_SYS_ACTORW		3	/* Activate to R/W			*/
+#define CONFIG_SYS_SDMODE_CAS_LAT	3	/* SDMODE CAS latency			*/
 #endif
-#define CFG_SDMODE_WRAP		0	/* SDMODE wrap type			*/
-#define CFG_SDMODE_BURSTLEN	2	/* SDMODE Burst length 2=4, 3=8		*/
-#define CFG_REGDIMM		0
+#define CONFIG_SYS_SDMODE_WRAP		0	/* SDMODE wrap type			*/
+#define CONFIG_SYS_SDMODE_BURSTLEN	2	/* SDMODE Burst length 2=4, 3=8		*/
+#define CONFIG_SYS_REGDIMM		0
 #if defined (CONFIG_MPC8240)
-#define CFG_REGISTERD_TYPE_BUFFER   0
+#define CONFIG_SYS_REGISTERD_TYPE_BUFFER   0
 #elif defined (CONFIG_MPC8245)
-#define CFG_REGISTERD_TYPE_BUFFER   1
-#define CFG_EXTROM		    0
+#define CONFIG_SYS_REGISTERD_TYPE_BUFFER   1
+#define CONFIG_SYS_EXTROM		    0
 #else
 #error Specific type of MPC824x must be defined (i.e. CONFIG_MPC8240)
 #endif
@@ -327,51 +327,51 @@
  * bits will be set to 0x00000 for a start address, or 0xfffff for an
  * end address
  */
-#define CFG_BANK0_START		0x00000000
-#define CFG_BANK0_END		(CFG_MAX_RAM_SIZE - 1)
-#define CFG_BANK0_ENABLE	1
-#define CFG_BANK1_START		0x3ff00000
-#define CFG_BANK1_END		0x3fffffff
-#define CFG_BANK1_ENABLE	0
-#define CFG_BANK2_START		0x3ff00000
-#define CFG_BANK2_END		0x3fffffff
-#define CFG_BANK2_ENABLE	0
-#define CFG_BANK3_START		0x3ff00000
-#define CFG_BANK3_END		0x3fffffff
-#define CFG_BANK3_ENABLE	0
-#define CFG_BANK4_START		0x00000000
-#define CFG_BANK4_END		0x00000000
-#define CFG_BANK4_ENABLE	0
-#define CFG_BANK5_START		0x00000000
-#define CFG_BANK5_END		0x00000000
-#define CFG_BANK5_ENABLE	0
-#define CFG_BANK6_START		0x00000000
-#define CFG_BANK6_END		0x00000000
-#define CFG_BANK6_ENABLE	0
-#define CFG_BANK7_START		0x00000000
-#define CFG_BANK7_END		0x00000000
-#define CFG_BANK7_ENABLE	0
+#define CONFIG_SYS_BANK0_START		0x00000000
+#define CONFIG_SYS_BANK0_END		(CONFIG_SYS_MAX_RAM_SIZE - 1)
+#define CONFIG_SYS_BANK0_ENABLE	1
+#define CONFIG_SYS_BANK1_START		0x3ff00000
+#define CONFIG_SYS_BANK1_END		0x3fffffff
+#define CONFIG_SYS_BANK1_ENABLE	0
+#define CONFIG_SYS_BANK2_START		0x3ff00000
+#define CONFIG_SYS_BANK2_END		0x3fffffff
+#define CONFIG_SYS_BANK2_ENABLE	0
+#define CONFIG_SYS_BANK3_START		0x3ff00000
+#define CONFIG_SYS_BANK3_END		0x3fffffff
+#define CONFIG_SYS_BANK3_ENABLE	0
+#define CONFIG_SYS_BANK4_START		0x00000000
+#define CONFIG_SYS_BANK4_END		0x00000000
+#define CONFIG_SYS_BANK4_ENABLE	0
+#define CONFIG_SYS_BANK5_START		0x00000000
+#define CONFIG_SYS_BANK5_END		0x00000000
+#define CONFIG_SYS_BANK5_ENABLE	0
+#define CONFIG_SYS_BANK6_START		0x00000000
+#define CONFIG_SYS_BANK6_END		0x00000000
+#define CONFIG_SYS_BANK6_ENABLE	0
+#define CONFIG_SYS_BANK7_START		0x00000000
+#define CONFIG_SYS_BANK7_END		0x00000000
+#define CONFIG_SYS_BANK7_ENABLE	0
 
 /*-----------------------------------------------------------------------
  * Memory bank enable bitmask, specifying which of the banks defined above
  are actually present. MSB is for bank #7, LSB is for bank #0.
  */
-#define CFG_BANK_ENABLE		0x01
+#define CONFIG_SYS_BANK_ENABLE		0x01
 
 #if defined (CONFIG_MPC8240)
-#define CFG_ODCR		0xDF	/* configures line driver impedances,	*/
+#define CONFIG_SYS_ODCR		0xDF	/* configures line driver impedances,	*/
 					/* see 8240 book for bit definitions	*/
 #elif defined (CONFIG_MPC8245)
 #if defined (CONFIG_133MHZ_DRAM)
-#define CFG_ODCR		0xFE	/* configures line driver impedances - 133MHz	*/
+#define CONFIG_SYS_ODCR		0xFE	/* configures line driver impedances - 133MHz	*/
 #else
-#define CFG_ODCR		0xDE	/* configures line driver impedances - 66MHz	*/
+#define CONFIG_SYS_ODCR		0xDE	/* configures line driver impedances - 66MHz	*/
 #endif
 #else
 #error Specific type of MPC824x must be defined (i.e. CONFIG_MPC8240)
 #endif
 
-#define CFG_PGMAX		0x32	/* how long the 8240 retains the	*/
+#define CONFIG_SYS_PGMAX		0x32	/* how long the 8240 retains the	*/
 					/* currently accessed page in memory	*/
 					/* see 8240 book for details		*/
 
@@ -379,37 +379,37 @@
  * Block Address Translation (BAT) register settings.
  */
 /* SDRAM 0 - 256MB */
-#define CFG_IBAT0L	(CFG_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
-#define CFG_IBAT0U	(CFG_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CONFIG_SYS_IBAT0L	(CONFIG_SYS_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
+#define CONFIG_SYS_IBAT0U	(CONFIG_SYS_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
 
 /* stack in DCACHE @ 1GB (no backing mem) */
-#define CFG_IBAT1L	(CFG_INIT_RAM_ADDR | BATL_PP_10 | BATL_MEMCOHERENCE)
-#define CFG_IBAT1U	(CFG_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP)
+#define CONFIG_SYS_IBAT1L	(CONFIG_SYS_INIT_RAM_ADDR | BATL_PP_10 | BATL_MEMCOHERENCE)
+#define CONFIG_SYS_IBAT1U	(CONFIG_SYS_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP)
 
 /* PCI memory */
-#define CFG_IBAT2L	(0x80000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
-#define CFG_IBAT2U	(0x80000000 | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CONFIG_SYS_IBAT2L	(0x80000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
+#define CONFIG_SYS_IBAT2U	(0x80000000 | BATU_BL_256M | BATU_VS | BATU_VP)
 
 /* Flash, config addrs, etc */
-#define CFG_IBAT3L	(0xF0000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
-#define CFG_IBAT3U	(0xF0000000 | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CONFIG_SYS_IBAT3L	(0xF0000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
+#define CONFIG_SYS_IBAT3U	(0xF0000000 | BATU_BL_256M | BATU_VS | BATU_VP)
 
-#define CFG_DBAT0L	CFG_IBAT0L
-#define CFG_DBAT0U	CFG_IBAT0U
-#define CFG_DBAT1L	CFG_IBAT1L
-#define CFG_DBAT1U	CFG_IBAT1U
-#define CFG_DBAT2L	CFG_IBAT2L
-#define CFG_DBAT2U	CFG_IBAT2U
-#define CFG_DBAT3L	CFG_IBAT3L
-#define CFG_DBAT3U	CFG_IBAT3U
+#define CONFIG_SYS_DBAT0L	CONFIG_SYS_IBAT0L
+#define CONFIG_SYS_DBAT0U	CONFIG_SYS_IBAT0U
+#define CONFIG_SYS_DBAT1L	CONFIG_SYS_IBAT1L
+#define CONFIG_SYS_DBAT1U	CONFIG_SYS_IBAT1U
+#define CONFIG_SYS_DBAT2L	CONFIG_SYS_IBAT2L
+#define CONFIG_SYS_DBAT2U	CONFIG_SYS_IBAT2U
+#define CONFIG_SYS_DBAT3L	CONFIG_SYS_IBAT3L
+#define CONFIG_SYS_DBAT3U	CONFIG_SYS_IBAT3U
 
 
 /*-----------------------------------------------------------------------
  * Cache Configuration
  */
-#define CFG_CACHELINE_SIZE	32
+#define CONFIG_SYS_CACHELINE_SIZE	32
 #if defined(CONFIG_CMD_KGDB)
-#  define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value */
+#  define CONFIG_SYS_CACHELINE_SHIFT	5	/* log base 2 of the above value */
 #endif
 
 
@@ -432,15 +432,15 @@
 /*-----------------------------------------------------------------------
  * IDE/ATA stuff
  */
-#define CFG_IDE_MAXBUS	    1	/* max. 2 IDE busses	*/
-#define CFG_IDE_MAXDEVICE   (CFG_IDE_MAXBUS*1)	/* max. 2 drives per IDE bus */
+#define CONFIG_SYS_IDE_MAXBUS	    1	/* max. 2 IDE busses	*/
+#define CONFIG_SYS_IDE_MAXDEVICE   (CONFIG_SYS_IDE_MAXBUS*1)	/* max. 2 drives per IDE bus */
 
-#define CFG_ATA_BASE_ADDR   CFG_ISA_IO	/* base address */
-#define CFG_ATA_IDE0_OFFSET 0x01F0	/* ide0 offste */
-#define CFG_ATA_IDE1_OFFSET 0x0170	/* ide1 offset */
-#define CFG_ATA_DATA_OFFSET 0	/* data reg offset  */
-#define CFG_ATA_REG_OFFSET  0	/* reg offset */
-#define CFG_ATA_ALT_OFFSET  0x200	/* alternate register offset */
+#define CONFIG_SYS_ATA_BASE_ADDR   CONFIG_SYS_ISA_IO	/* base address */
+#define CONFIG_SYS_ATA_IDE0_OFFSET 0x01F0	/* ide0 offste */
+#define CONFIG_SYS_ATA_IDE1_OFFSET 0x0170	/* ide1 offset */
+#define CONFIG_SYS_ATA_DATA_OFFSET 0	/* data reg offset  */
+#define CONFIG_SYS_ATA_REG_OFFSET  0	/* reg offset */
+#define CONFIG_SYS_ATA_ALT_OFFSET  0x200	/* alternate register offset */
 
 #define CONFIG_ATAPI
 
@@ -459,6 +459,6 @@
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
+#define CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
 
 #endif /* __CONFIG_H */
diff --git a/include/configs/ebony.h b/include/configs/ebony.h
index df444d8e9..10f425dd1 100644
--- a/include/configs/ebony.h
+++ b/include/configs/ebony.h
@@ -49,40 +49,40 @@
  *       supported for backward compatibility.
  */
 #if 1
-#define CFG_ENV_IS_IN_FLASH     1	/* use FLASH for environment vars	*/
+#define CONFIG_ENV_IS_IN_FLASH     1	/* use FLASH for environment vars	*/
 #else
-#define CFG_ENV_IS_IN_NVRAM	1	/* use NVRAM for environment vars	*/
+#define CONFIG_ENV_IS_IN_NVRAM	1	/* use NVRAM for environment vars	*/
 #endif
 
 /*-----------------------------------------------------------------------
  * Base addresses -- Note these are effective addresses where the
  * actual resources get mapped (not physical addresses)
  *----------------------------------------------------------------------*/
-#define CFG_SDRAM_BASE	    0x00000000	    /* _must_ be 0		*/
-#define CFG_FLASH_BASE	    0xff800000	    /* start of FLASH		*/
-#define CFG_PCI_MEMBASE	    0x80000000	    /* mapped pci memory	*/
-#define CFG_PERIPHERAL_BASE 0xe0000000	    /* internal peripherals	*/
-#define CFG_ISRAM_BASE	    0xc0000000	    /* internal SRAM		*/
-#define CFG_PCI_BASE	    0xd0000000	    /* internal PCI regs	*/
+#define CONFIG_SYS_SDRAM_BASE	    0x00000000	    /* _must_ be 0		*/
+#define CONFIG_SYS_FLASH_BASE	    0xff800000	    /* start of FLASH		*/
+#define CONFIG_SYS_PCI_MEMBASE	    0x80000000	    /* mapped pci memory	*/
+#define CONFIG_SYS_PERIPHERAL_BASE 0xe0000000	    /* internal peripherals	*/
+#define CONFIG_SYS_ISRAM_BASE	    0xc0000000	    /* internal SRAM		*/
+#define CONFIG_SYS_PCI_BASE	    0xd0000000	    /* internal PCI regs	*/
 
-#define CFG_NVRAM_BASE_ADDR (CFG_PERIPHERAL_BASE + 0x08000000)
-#define CFG_FPGA_BASE	    (CFG_PERIPHERAL_BASE + 0x08300000)
+#define CONFIG_SYS_NVRAM_BASE_ADDR (CONFIG_SYS_PERIPHERAL_BASE + 0x08000000)
+#define CONFIG_SYS_FPGA_BASE	    (CONFIG_SYS_PERIPHERAL_BASE + 0x08300000)
 
 /*-----------------------------------------------------------------------
  * Initial RAM & stack pointer (placed in internal SRAM)
  *----------------------------------------------------------------------*/
-#define CFG_INIT_RAM_ADDR   CFG_ISRAM_BASE  /* Initial RAM address	*/
-#define CFG_INIT_RAM_END    0x2000	    /* End of used area in RAM	*/
-#define CFG_GBL_DATA_SIZE  128		    /* num bytes initial data	*/
+#define CONFIG_SYS_INIT_RAM_ADDR   CONFIG_SYS_ISRAM_BASE  /* Initial RAM address	*/
+#define CONFIG_SYS_INIT_RAM_END    0x2000	    /* End of used area in RAM	*/
+#define CONFIG_SYS_GBL_DATA_SIZE  128		    /* num bytes initial data	*/
 
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
 /*-----------------------------------------------------------------------
  * Serial Port
  *----------------------------------------------------------------------*/
 #undef	CONFIG_SERIAL_SOFTWARE_FIFO
-#define CFG_EXT_SERIAL_CLOCK	(1843200 * 6)	/* Ext clk @ 11.059 MHz */
+#define CONFIG_SYS_EXT_SERIAL_CLOCK	(1843200 * 6)	/* Ext clk @ 11.059 MHz */
 
 /*-----------------------------------------------------------------------
  * NVRAM/RTC
@@ -91,42 +91,42 @@
  * The DS1743 code assumes this condition (i.e. -- it assumes the base
  * address for the RTC registers is:
  *
- *	CFG_NVRAM_BASE_ADDR + CFG_NVRAM_SIZE
+ *	CONFIG_SYS_NVRAM_BASE_ADDR + CONFIG_SYS_NVRAM_SIZE
  *
  *----------------------------------------------------------------------*/
-#define CFG_NVRAM_SIZE	    (0x2000 - 8)    /* NVRAM size(8k)- RTC regs */
+#define CONFIG_SYS_NVRAM_SIZE	    (0x2000 - 8)    /* NVRAM size(8k)- RTC regs */
 #define CONFIG_RTC_DS174x	1		    /* DS1743 RTC		*/
 
-#ifdef CFG_ENV_IS_IN_NVRAM
-#define CFG_ENV_SIZE		0x1000	    /* Size of Environment vars */
-#define CFG_ENV_ADDR		\
-	(CFG_NVRAM_BASE_ADDR+CFG_NVRAM_SIZE-CFG_ENV_SIZE)
-#endif /* CFG_ENV_IS_IN_NVRAM */
+#ifdef CONFIG_ENV_IS_IN_NVRAM
+#define CONFIG_ENV_SIZE		0x1000	    /* Size of Environment vars */
+#define CONFIG_ENV_ADDR		\
+	(CONFIG_SYS_NVRAM_BASE_ADDR+CONFIG_SYS_NVRAM_SIZE-CONFIG_ENV_SIZE)
+#endif /* CONFIG_ENV_IS_IN_NVRAM */
 
 /*-----------------------------------------------------------------------
  * FLASH related
  *----------------------------------------------------------------------*/
-#define CFG_MAX_FLASH_BANKS	3		    /* number of banks	    */
-#define CFG_MAX_FLASH_SECT	32		    /* sectors per device   */
+#define CONFIG_SYS_MAX_FLASH_BANKS	3		    /* number of banks	    */
+#define CONFIG_SYS_MAX_FLASH_SECT	32		    /* sectors per device   */
 
-#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
-#define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
+#define CONFIG_SYS_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
+#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
 
-#define CFG_FLASH_EMPTY_INFO		/* print 'E' for empty sector on flinfo */
+#define CONFIG_SYS_FLASH_EMPTY_INFO		/* print 'E' for empty sector on flinfo */
 
-#define CFG_FLASH_ADDR0         0x5555
-#define CFG_FLASH_ADDR1         0x2aaa
-#define CFG_FLASH_WORD_SIZE     unsigned char
+#define CONFIG_SYS_FLASH_ADDR0         0x5555
+#define CONFIG_SYS_FLASH_ADDR1         0x2aaa
+#define CONFIG_SYS_FLASH_WORD_SIZE     unsigned char
 
-#ifdef CFG_ENV_IS_IN_FLASH
-#define CFG_ENV_SECT_SIZE	0x10000	/* size of one complete sector		*/
-#define CFG_ENV_ADDR		(CFG_MONITOR_BASE-CFG_ENV_SECT_SIZE)
-#define	CFG_ENV_SIZE		0x4000	/* Total Size of Environment Sector	*/
+#ifdef CONFIG_ENV_IS_IN_FLASH
+#define CONFIG_ENV_SECT_SIZE	0x10000	/* size of one complete sector		*/
+#define CONFIG_ENV_ADDR		(CONFIG_SYS_MONITOR_BASE-CONFIG_ENV_SECT_SIZE)
+#define	CONFIG_ENV_SIZE		0x4000	/* Total Size of Environment Sector	*/
 
 /* Address and size of Redundant Environment Sector	*/
-#define CFG_ENV_ADDR_REDUND	(CFG_ENV_ADDR-CFG_ENV_SECT_SIZE)
-#define CFG_ENV_SIZE_REDUND	(CFG_ENV_SIZE)
-#endif /* CFG_ENV_IS_IN_FLASH */
+#define CONFIG_ENV_ADDR_REDUND	(CONFIG_ENV_ADDR-CONFIG_ENV_SECT_SIZE)
+#define CONFIG_ENV_SIZE_REDUND	(CONFIG_ENV_SIZE)
+#endif /* CONFIG_ENV_IS_IN_FLASH */
 
 /*-----------------------------------------------------------------------
  * DDR SDRAM
@@ -138,14 +138,13 @@
 /*-----------------------------------------------------------------------
  * I2C
  *----------------------------------------------------------------------*/
-#define CFG_I2C_SPEED		400000	/* I2C speed and slave address	*/
+#define CONFIG_SYS_I2C_SPEED		400000	/* I2C speed and slave address	*/
 
-#define CFG_I2C_MULTI_EEPROMS
-#define CFG_I2C_EEPROM_ADDR	(0xa8>>1)
-#define CFG_I2C_EEPROM_ADDR_LEN 1
-#define CFG_EEPROM_PAGE_WRITE_ENABLE
-#define CFG_EEPROM_PAGE_WRITE_BITS 3
-#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10
+#define CONFIG_SYS_I2C_MULTI_EEPROMS
+#define CONFIG_SYS_I2C_EEPROM_ADDR	(0xa8>>1)
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10
 
 /*
  * Default environment variables
@@ -180,12 +179,12 @@
 #define CONFIG_PCI			            /* include pci support	        */
 #define CONFIG_PCI_PNP			        /* do pci plug-and-play         */
 #define CONFIG_PCI_SCAN_SHOW            /* show pci devices on startup  */
-#define CFG_PCI_TARGBASE    0x80000000  /* PCIaddr mapped to CFG_PCI_MEMBASE */
+#define CONFIG_SYS_PCI_TARGBASE    0x80000000  /* PCIaddr mapped to CONFIG_SYS_PCI_MEMBASE */
 
 /* Board-specific PCI */
-#define CFG_PCI_TARGET_INIT	            /* let board init pci target    */
+#define CONFIG_SYS_PCI_TARGET_INIT	            /* let board init pci target    */
 
-#define CFG_PCI_SUBSYS_VENDORID 0x10e8	/* AMCC */
-#define CFG_PCI_SUBSYS_DEVICEID 0xcafe  /* Whatever */
+#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x10e8	/* AMCC */
+#define CONFIG_SYS_PCI_SUBSYS_DEVICEID 0xcafe  /* Whatever */
 
 #endif	/* __CONFIG_H */
diff --git a/include/configs/ep7312.h b/include/configs/ep7312.h
index 54330821b..0581842ec 100644
--- a/include/configs/ep7312.h
+++ b/include/configs/ep7312.h
@@ -41,8 +41,8 @@
 /*
  * Size of malloc() pool
  */
-#define CFG_MALLOC_LEN		(CFG_ENV_SIZE + 128*1024)
-#define CFG_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
+#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + 128*1024)
+#define CONFIG_SYS_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
 
 /*
  * Hardware drivers
@@ -97,24 +97,24 @@
 /*
  * Miscellaneous configurable options
  */
-#define	CFG_LONGHELP				/* undef to save memory		*/
-#define	CFG_PROMPT		"EP7312 # "	/* Monitor Command Prompt	*/
-#define	CFG_CBSIZE		256		/* Console I/O Buffer Size	*/
-#define	CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define	CFG_MAXARGS		16		/* max number of command args	*/
-#define CFG_BARGSIZE		CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+#define	CONFIG_SYS_LONGHELP				/* undef to save memory		*/
+#define	CONFIG_SYS_PROMPT		"EP7312 # "	/* Monitor Command Prompt	*/
+#define	CONFIG_SYS_CBSIZE		256		/* Console I/O Buffer Size	*/
+#define	CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define	CONFIG_SYS_MAXARGS		16		/* max number of command args	*/
+#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
 
-#define CFG_MEMTEST_START	0xc0400000	/* memtest works on	*/
-#define CFG_MEMTEST_END		0xc0800000	/* 4 ... 8 MB in DRAM	*/
+#define CONFIG_SYS_MEMTEST_START	0xc0400000	/* memtest works on	*/
+#define CONFIG_SYS_MEMTEST_END		0xc0800000	/* 4 ... 8 MB in DRAM	*/
 
-#undef  CFG_CLKS_IN_HZ		/* everything, incl board info, in Hz */
+#undef  CONFIG_SYS_CLKS_IN_HZ		/* everything, incl board info, in Hz */
 
-#define	CFG_LOAD_ADDR		0xc0500000	/* default load address	*/
+#define	CONFIG_SYS_LOAD_ADDR		0xc0500000	/* default load address	*/
 
-#define	CFG_HZ			2000		/* decrementer freq: 2 kHz */
+#define	CONFIG_SYS_HZ			2000		/* decrementer freq: 2 kHz */
 
 						/* valid baudrates */
-#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
 
 /*-----------------------------------------------------------------------
  * Stack sizes
@@ -137,21 +137,21 @@
 #define PHYS_FLASH_1		0x00000000 /* Flash Bank #1 */
 #define PHYS_FLASH_SIZE		0x01000000 /* 16 MB */
 
-#define CFG_FLASH_BASE		PHYS_FLASH_1
+#define CONFIG_SYS_FLASH_BASE		PHYS_FLASH_1
 
 /*-----------------------------------------------------------------------
  * FLASH and environment organization
  */
-#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
-#define CFG_MAX_FLASH_SECT	128	/* max number of sectors on one chip	*/
+#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
+#define CONFIG_SYS_MAX_FLASH_SECT	128	/* max number of sectors on one chip	*/
 
 /* timeout values are in ticks */
-#define CFG_FLASH_ERASE_TOUT	(2*CFG_HZ) /* Timeout for Flash Erase */
-#define CFG_FLASH_WRITE_TOUT	(2*CFG_HZ) /* Timeout for Flash Write */
+#define CONFIG_SYS_FLASH_ERASE_TOUT	(2*CONFIG_SYS_HZ) /* Timeout for Flash Erase */
+#define CONFIG_SYS_FLASH_WRITE_TOUT	(2*CONFIG_SYS_HZ) /* Timeout for Flash Write */
 
-#define	CFG_ENV_IS_IN_FLASH	1
-#define CFG_ENV_ADDR		(PHYS_FLASH_1 + 0x20000)	/* Addr of Environment Sector	*/
-#define CFG_ENV_SIZE		0x20000	/* Total Size of Environment Sector	*/
+#define	CONFIG_ENV_IS_IN_FLASH	1
+#define CONFIG_ENV_ADDR		(PHYS_FLASH_1 + 0x20000)	/* Addr of Environment Sector	*/
+#define CONFIG_ENV_SIZE		0x20000	/* Total Size of Environment Sector	*/
 
 /*
  * JFFS2 partitions
diff --git a/include/configs/ep8248.h b/include/configs/ep8248.h
index ccc0d5d22..f7b3fdea8 100644
--- a/include/configs/ep8248.h
+++ b/include/configs/ep8248.h
@@ -48,7 +48,7 @@
 #undef	CONFIG_CONS_NONE		/* It's not on external UART */
 #define CONFIG_CONS_INDEX	1	/* SMC1 is used for console  */
 
-#define CFG_BCSR		0xFA000000
+#define CONFIG_SYS_BCSR		0xFA000000
 
 /*
  * Select ethernet configuration
@@ -76,10 +76,10 @@
  * - BDs/buffers on 60x bus
  * - Full duplex
  */
-#define CFG_CMXFCR_MASK	(CMXFCR_FC1 | CMXFCR_RF1CS_MSK | CMXFCR_TF1CS_MSK)
-#define CFG_CMXFCR_VALUE	(CMXFCR_RF1CS_CLK10 | CMXFCR_TF1CS_CLK11)
-#define CFG_CPMFCR_RAMTYPE	0
-#define CFG_FCC_PSMR		(FCC_PSMR_FDE | FCC_PSMR_LPB)
+#define CONFIG_SYS_CMXFCR_MASK	(CMXFCR_FC1 | CMXFCR_RF1CS_MSK | CMXFCR_TF1CS_MSK)
+#define CONFIG_SYS_CMXFCR_VALUE	(CMXFCR_RF1CS_CLK10 | CMXFCR_TF1CS_CLK11)
+#define CONFIG_SYS_CPMFCR_RAMTYPE	0
+#define CONFIG_SYS_FCC_PSMR		(FCC_PSMR_FDE | FCC_PSMR_LPB)
 
 #elif (CONFIG_ETHER_INDEX == 2)
 
@@ -88,10 +88,10 @@
  * - BDs/buffers on 60x bus
  * - Full duplex
  */
-#define CFG_CMXFCR_MASK	(CMXFCR_FC2 | CMXFCR_RF2CS_MSK | CMXFCR_TF2CS_MSK)
-#define CFG_CMXFCR_VALUE	(CMXFCR_RF2CS_CLK13 | CMXFCR_TF2CS_CLK14)
-#define CFG_CPMFCR_RAMTYPE	0
-#define CFG_FCC_PSMR		(FCC_PSMR_FDE | FCC_PSMR_LPB)
+#define CONFIG_SYS_CMXFCR_MASK	(CMXFCR_FC2 | CMXFCR_RF2CS_MSK | CMXFCR_TF2CS_MSK)
+#define CONFIG_SYS_CMXFCR_VALUE	(CMXFCR_RF2CS_CLK13 | CMXFCR_TF2CS_CLK14)
+#define CONFIG_SYS_CPMFCR_RAMTYPE	0
+#define CONFIG_SYS_FCC_PSMR		(FCC_PSMR_FDE | FCC_PSMR_LPB)
 
 #endif /* CONFIG_ETHER_INDEX */
 
@@ -101,15 +101,15 @@
  * GPIO pins used for bit-banged MII communications
  */
 #define MDIO_PORT		0	/* Not used - implemented in BCSR */
-#define MDIO_ACTIVE		(*(vu_char *)(CFG_BCSR + 8) &= 0xFB)
-#define MDIO_TRISTATE		(*(vu_char *)(CFG_BCSR + 8) |= 0x04)
-#define MDIO_READ		(*(vu_char *)(CFG_BCSR + 8) & 1)
+#define MDIO_ACTIVE		(*(vu_char *)(CONFIG_SYS_BCSR + 8) &= 0xFB)
+#define MDIO_TRISTATE		(*(vu_char *)(CONFIG_SYS_BCSR + 8) |= 0x04)
+#define MDIO_READ		(*(vu_char *)(CONFIG_SYS_BCSR + 8) & 1)
 
-#define MDIO(bit)		if(bit) *(vu_char *)(CFG_BCSR + 8) |= 0x01; \
-				else	*(vu_char *)(CFG_BCSR + 8) &= 0xFE
+#define MDIO(bit)		if(bit) *(vu_char *)(CONFIG_SYS_BCSR + 8) |= 0x01; \
+				else	*(vu_char *)(CONFIG_SYS_BCSR + 8) &= 0xFE
 
-#define MDC(bit)		if(bit) *(vu_char *)(CFG_BCSR + 8) |= 0x02; \
-				else	*(vu_char *)(CFG_BCSR + 8) &= 0xFD
+#define MDC(bit)		if(bit) *(vu_char *)(CONFIG_SYS_BCSR + 8) |= 0x02; \
+				else	*(vu_char *)(CONFIG_SYS_BCSR + 8) &= 0xFD
 
 #define MIIDELAY		udelay(1)
 
@@ -162,125 +162,125 @@
 /*
  * Miscellaneous configurable options
  */
-#define CFG_HUSH_PARSER
-#define CFG_PROMPT_HUSH_PS2	"> "
-#define CFG_LONGHELP			/* undef to save memory	    */
-#define CFG_PROMPT		"=> "	/* Monitor Command Prompt   */
+#define CONFIG_SYS_HUSH_PARSER
+#define CONFIG_SYS_PROMPT_HUSH_PS2	"> "
+#define CONFIG_SYS_LONGHELP			/* undef to save memory	    */
+#define CONFIG_SYS_PROMPT		"=> "	/* Monitor Command Prompt   */
 #if defined(CONFIG_CMD_KGDB)
-#define CFG_CBSIZE		1024	/* Console I/O Buffer Size  */
+#define CONFIG_SYS_CBSIZE		1024	/* Console I/O Buffer Size  */
 #else
-#define CFG_CBSIZE		256	/* Console I/O Buffer Size  */
+#define CONFIG_SYS_CBSIZE		256	/* Console I/O Buffer Size  */
 #endif
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16)	/* Print Buffer Size  */
-#define CFG_MAXARGS		16		/* max number of command args */
-#define CFG_BARGSIZE		CFG_CBSIZE	/* Boot Argument Buffer Size  */
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)	/* Print Buffer Size  */
+#define CONFIG_SYS_MAXARGS		16		/* max number of command args */
+#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size  */
 
-#define CFG_MEMTEST_START	0x00100000	/* memtest works on */
-#define CFG_MEMTEST_END		0x00f00000	/* 1 ... 15 MB in DRAM	*/
+#define CONFIG_SYS_MEMTEST_START	0x00100000	/* memtest works on */
+#define CONFIG_SYS_MEMTEST_END		0x00f00000	/* 1 ... 15 MB in DRAM	*/
 
-#define CFG_LOAD_ADDR		0x100000	/* default load address */
+#define CONFIG_SYS_LOAD_ADDR		0x100000	/* default load address */
 
-#define CFG_HZ			1000	/* decrementer freq: 1 ms ticks */
+#define CONFIG_SYS_HZ			1000	/* decrementer freq: 1 ms ticks */
 
-#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
 
-#define CFG_FLASH_BASE		0xFF800000
-#define CFG_FLASH_CFI
+#define CONFIG_SYS_FLASH_BASE		0xFF800000
+#define CONFIG_SYS_FLASH_CFI
 #define CONFIG_FLASH_CFI_DRIVER
-#define CFG_MAX_FLASH_BANKS	1	/* max num of flash banks	*/
-#define CFG_MAX_FLASH_SECT	256	/* max num of sects on one chip */
+#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max num of flash banks	*/
+#define CONFIG_SYS_MAX_FLASH_SECT	256	/* max num of sects on one chip */
 
-#define	CFG_DIRECT_FLASH_TFTP
+#define	CONFIG_SYS_DIRECT_FLASH_TFTP
 
 #if defined(CONFIG_CMD_JFFS2)
-#define CFG_JFFS2_FIRST_BANK	0
-#define CFG_JFFS2_NUM_BANKS	CFG_MAX_FLASH_BANKS
-#define CFG_JFFS2_FIRST_SECTOR  0
-#define CFG_JFFS2_LAST_SECTOR   62
-#define CFG_JFFS2_SORT_FRAGMENTS
-#define CFG_JFFS_CUSTOM_PART
+#define CONFIG_SYS_JFFS2_FIRST_BANK	0
+#define CONFIG_SYS_JFFS2_NUM_BANKS	CONFIG_SYS_MAX_FLASH_BANKS
+#define CONFIG_SYS_JFFS2_FIRST_SECTOR  0
+#define CONFIG_SYS_JFFS2_LAST_SECTOR   62
+#define CONFIG_SYS_JFFS2_SORT_FRAGMENTS
+#define CONFIG_SYS_JFFS_CUSTOM_PART
 #endif
 
 #if defined(CONFIG_CMD_I2C)
 #define CONFIG_HARD_I2C		1	/* To enable I2C support	*/
-#define CFG_I2C_SPEED		100000	/* I2C speed			*/
-#define CFG_I2C_SLAVE		0x7F	/* I2C slave address		*/
+#define CONFIG_SYS_I2C_SPEED		100000	/* I2C speed			*/
+#define CONFIG_SYS_I2C_SLAVE		0x7F	/* I2C slave address		*/
 #endif
 
-#define CFG_MONITOR_BASE	TEXT_BASE
-#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
-#define CFG_RAMBOOT
+#define CONFIG_SYS_MONITOR_BASE	TEXT_BASE
+#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
+#define CONFIG_SYS_RAMBOOT
 #endif
 
-#define CFG_MONITOR_LEN		(256 << 10)	/* Reserve 256KB for Monitor */
+#define CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 256KB for Monitor */
 
-#define CFG_ENV_IS_IN_FLASH
+#define CONFIG_ENV_IS_IN_FLASH
 
-#ifdef CFG_ENV_IS_IN_FLASH
-#define CFG_ENV_SECT_SIZE	0x20000
-#define CFG_ENV_ADDR		(CFG_MONITOR_BASE + CFG_MONITOR_LEN)
-#endif /* CFG_ENV_IS_IN_FLASH */
+#ifdef CONFIG_ENV_IS_IN_FLASH
+#define CONFIG_ENV_SECT_SIZE	0x20000
+#define CONFIG_ENV_ADDR		(CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)
+#endif /* CONFIG_ENV_IS_IN_FLASH */
 
-#define CFG_DEFAULT_IMMR	0x00010000
+#define CONFIG_SYS_DEFAULT_IMMR	0x00010000
 
-#define CFG_IMMR		0xF0000000
+#define CONFIG_SYS_IMMR		0xF0000000
 
-#define CFG_INIT_RAM_ADDR	CFG_IMMR
-#define CFG_INIT_RAM_END	0x2000	/* End of used area in DPRAM	*/
-#define CFG_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_IMMR
+#define CONFIG_SYS_INIT_RAM_END	0x2000	/* End of used area in DPRAM	*/
+#define CONFIG_SYS_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
 /* Hard reset configuration word */
-#define CFG_HRCW_MASTER		0x0C40025A /* Not used - provided by FPGA */
+#define CONFIG_SYS_HRCW_MASTER		0x0C40025A /* Not used - provided by FPGA */
 /* No slaves */
-#define CFG_HRCW_SLAVE1		0
-#define CFG_HRCW_SLAVE2		0
-#define CFG_HRCW_SLAVE3		0
-#define CFG_HRCW_SLAVE4		0
-#define CFG_HRCW_SLAVE5		0
-#define CFG_HRCW_SLAVE6		0
-#define CFG_HRCW_SLAVE7		0
+#define CONFIG_SYS_HRCW_SLAVE1		0
+#define CONFIG_SYS_HRCW_SLAVE2		0
+#define CONFIG_SYS_HRCW_SLAVE3		0
+#define CONFIG_SYS_HRCW_SLAVE4		0
+#define CONFIG_SYS_HRCW_SLAVE5		0
+#define CONFIG_SYS_HRCW_SLAVE6		0
+#define CONFIG_SYS_HRCW_SLAVE7		0
 
 #define BOOTFLAG_COLD		0x01	/* Normal Power-On: Boot from FLASH */
 #define BOOTFLAG_WARM		0x02	/* Software reboot                  */
 
-#define CFG_MALLOC_LEN		(4096 << 10)	/* Reserve 4 MB for malloc()	*/
-#define CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
+#define CONFIG_SYS_MALLOC_LEN		(4096 << 10)	/* Reserve 4 MB for malloc()	*/
+#define CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
 
-#define CFG_CACHELINE_SIZE	32	/* For MPC8260 CPUs */
+#define CONFIG_SYS_CACHELINE_SIZE	32	/* For MPC8260 CPUs */
 #if defined(CONFIG_CMD_KGDB)
-#  define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value */
+#  define CONFIG_SYS_CACHELINE_SHIFT	5	/* log base 2 of the above value */
 #endif
 
-#define CFG_HID0_INIT		0
-#define CFG_HID0_FINAL		(HID0_ICE | HID0_IFEM | HID0_ABE)
+#define CONFIG_SYS_HID0_INIT		0
+#define CONFIG_SYS_HID0_FINAL		(HID0_ICE | HID0_IFEM | HID0_ABE)
 
-#define CFG_HID2		0
+#define CONFIG_SYS_HID2		0
 
-#define CFG_SIUMCR		0x01240200
-#define CFG_SYPCR		0xFFFF0683
-#define CFG_BCR			0x00000000
-#define CFG_SCCR		SCCR_DFBRG01
+#define CONFIG_SYS_SIUMCR		0x01240200
+#define CONFIG_SYS_SYPCR		0xFFFF0683
+#define CONFIG_SYS_BCR			0x00000000
+#define CONFIG_SYS_SCCR		SCCR_DFBRG01
 
-#define CFG_RMR			RMR_CSRE
-#define CFG_TMCNTSC		(TMCNTSC_SEC|TMCNTSC_ALR|TMCNTSC_TCF|TMCNTSC_TCE)
-#define CFG_PISCR		(PISCR_PS|PISCR_PTF|PISCR_PTE)
-#define CFG_RCCR		0
+#define CONFIG_SYS_RMR			RMR_CSRE
+#define CONFIG_SYS_TMCNTSC		(TMCNTSC_SEC|TMCNTSC_ALR|TMCNTSC_TCF|TMCNTSC_TCE)
+#define CONFIG_SYS_PISCR		(PISCR_PS|PISCR_PTF|PISCR_PTE)
+#define CONFIG_SYS_RCCR		0
 
-#define CFG_MPTPR		0x1300
-#define CFG_PSDMR		0x82672522
-#define CFG_PSRT		0x4B
+#define CONFIG_SYS_MPTPR		0x1300
+#define CONFIG_SYS_PSDMR		0x82672522
+#define CONFIG_SYS_PSRT		0x4B
 
-#define CFG_SDRAM_BASE		0x00000000
-#define CFG_SDRAM_BR		(CFG_SDRAM_BASE | 0x00001841)
-#define CFG_SDRAM_OR		0xFF0030C0
+#define CONFIG_SYS_SDRAM_BASE		0x00000000
+#define CONFIG_SYS_SDRAM_BR		(CONFIG_SYS_SDRAM_BASE | 0x00001841)
+#define CONFIG_SYS_SDRAM_OR		0xFF0030C0
 
-#define CFG_BR0_PRELIM		(CFG_FLASH_BASE | 0x00001801)
-#define CFG_OR0_PRELIM		0xFF8008C2
-#define CFG_BR2_PRELIM		(CFG_BCSR | 0x00000801)
-#define CFG_OR2_PRELIM		0xFFF00864
+#define CONFIG_SYS_BR0_PRELIM		(CONFIG_SYS_FLASH_BASE | 0x00001801)
+#define CONFIG_SYS_OR0_PRELIM		0xFF8008C2
+#define CONFIG_SYS_BR2_PRELIM		(CONFIG_SYS_BCSR | 0x00000801)
+#define CONFIG_SYS_OR2_PRELIM		0xFFF00864
 
-#define CFG_RESET_ADDRESS	0xC0000000
+#define CONFIG_SYS_RESET_ADDRESS	0xC0000000
 
 #endif /* __CONFIG_H */
diff --git a/include/configs/ep8260.h b/include/configs/ep8260.h
index 0ce6b80b9..d49d02f28 100644
--- a/include/configs/ep8260.h
+++ b/include/configs/ep8260.h
@@ -33,7 +33,7 @@
  *	- 16M Flash (4 x AM29DL323DB90WDI)
  *	- 128k NVRAM with RTC
  *
- * "EP8260 H2, V.1.3" (CFG_EP8260_H2)
+ * "EP8260 H2, V.1.3" (CONFIG_SYS_EP8260_H2)
  *	- 300MHz/133MHz/66MHz
  *	- 64M 60x Bus SDRAM
  *	- 32M Local Bus SDRAM
@@ -45,8 +45,8 @@
 #define __CONFIG_H
 
 /* Define this to enable support the EP8260 H2 version */
-#define CFG_EP8260_H2	1
-/* #undef CFG_EP8260_H2  */
+#define CONFIG_SYS_EP8260_H2	1
+/* #undef CONFIG_SYS_EP8260_H2  */
 
 #define CONFIG_CPM2		1	/* Has a CPM2 */
 
@@ -75,10 +75,10 @@
  * 0x6	     0x1	 66	133    266
  * 0x6	     0x2	 66	133    300
  */
-#ifdef CFG_EP8260_H2
-#define CFG_SBC_MODCK_H  (HRCW_MODCK_H0110)
+#ifdef CONFIG_SYS_EP8260_H2
+#define CONFIG_SYS_SBC_MODCK_H  (HRCW_MODCK_H0110)
 #else
-#define CFG_SBC_MODCK_H  (HRCW_MODCK_H0110)
+#define CONFIG_SYS_SBC_MODCK_H  (HRCW_MODCK_H0110)
 #endif
 
 /* Define this if you want to boot from 0x00000100. If you don't define
@@ -87,26 +87,26 @@
  * way to do that is to program the bootloader at both addresses.
  * It is suggested that you just let U-Boot live at 0x00000000.
  */
-/* #define CFG_SBC_BOOT_LOW 1 */	/* only for HRCW */
-/* #undef CFG_SBC_BOOT_LOW */
+/* #define CONFIG_SYS_SBC_BOOT_LOW 1 */	/* only for HRCW */
+/* #undef CONFIG_SYS_SBC_BOOT_LOW */
 
 /* The reset command will not work as expected if the reset address does
  * not point to the correct address.
  */
 
-#define CFG_RESET_ADDRESS	0xFFF00100
+#define CONFIG_SYS_RESET_ADDRESS	0xFFF00100
 
 /* What should the base address of the main FLASH be and how big is
  * it (in MBytes)? This must contain TEXT_BASE from board/ep8260/config.mk
  * The main FLASH is whichever is connected to *CS0. U-Boot expects
  * this to be the SIMM.
  */
-#ifdef CFG_EP8260_H2
-#define CFG_FLASH0_BASE 0xFE000000
-#define CFG_FLASH0_SIZE 32
+#ifdef CONFIG_SYS_EP8260_H2
+#define CONFIG_SYS_FLASH0_BASE 0xFE000000
+#define CONFIG_SYS_FLASH0_SIZE 32
 #else
-#define CFG_FLASH0_BASE 0xFF000000
-#define CFG_FLASH0_SIZE 16
+#define CONFIG_SYS_FLASH0_BASE 0xFF000000
+#define CONFIG_SYS_FLASH0_SIZE 16
 #endif
 
 /* What should the base address of the secondary FLASH be and how big
@@ -114,41 +114,41 @@
  * to *CS6. U-Boot expects this to be the on board FLASH. If you don't
  * want it enabled, don't define these constants.
  */
-#define CFG_FLASH1_BASE 0
-#define CFG_FLASH1_SIZE 0
-#undef CFG_FLASH1_BASE
-#undef CFG_FLASH1_SIZE
+#define CONFIG_SYS_FLASH1_BASE 0
+#define CONFIG_SYS_FLASH1_SIZE 0
+#undef CONFIG_SYS_FLASH1_BASE
+#undef CONFIG_SYS_FLASH1_SIZE
 
 /* What should be the base address of SDRAM DIMM (60x bus) and how big is
  * it (in Mbytes)?
 */
-#define CFG_SDRAM0_BASE 0x00000000
-#define CFG_SDRAM0_SIZE 64
+#define CONFIG_SYS_SDRAM0_BASE 0x00000000
+#define CONFIG_SYS_SDRAM0_SIZE 64
 
-/* define CFG_LSDRAM if you want to enable the 32M SDRAM on the
+/* define CONFIG_SYS_LSDRAM if you want to enable the 32M SDRAM on the
  * local bus (8260 local bus is NOT cacheable!)
 */
-/* #define CFG_LSDRAM */
-#undef CFG_LSDRAM
+/* #define CONFIG_SYS_LSDRAM */
+#undef CONFIG_SYS_LSDRAM
 
-#ifdef CFG_LSDRAM
+#ifdef CONFIG_SYS_LSDRAM
 /* What should be the base address of SDRAM DIMM (local bus) and how big is
  * it (in Mbytes)?
 */
-  #define CFG_SDRAM1_BASE 0x04000000
-  #define CFG_SDRAM1_SIZE 32
+  #define CONFIG_SYS_SDRAM1_BASE 0x04000000
+  #define CONFIG_SYS_SDRAM1_SIZE 32
 #else
-  #define CFG_SDRAM1_BASE 0
-  #define CFG_SDRAM1_SIZE 0
-  #undef CFG_SDRAM1_BASE
-  #undef CFG_SDRAM1_SIZE
-#endif /* CFG_LSDRAM */
+  #define CONFIG_SYS_SDRAM1_BASE 0
+  #define CONFIG_SYS_SDRAM1_SIZE 0
+  #undef CONFIG_SYS_SDRAM1_BASE
+  #undef CONFIG_SYS_SDRAM1_SIZE
+#endif /* CONFIG_SYS_LSDRAM */
 
 /* What should be the base address of NVRAM and how big is
  * it (in Bytes)
  */
-#define CFG_NVRAM_BASE_ADDR  0xFA080000
-#define CFG_NVRAM_SIZE       (128*1024)-16
+#define CONFIG_SYS_NVRAM_BASE_ADDR  0xFA080000
+#define CONFIG_SYS_NVRAM_SIZE       (128*1024)-16
 
 /* The RTC is a Dallas DS1556
  */
@@ -157,8 +157,8 @@
 /* What should be the base address of the LEDs and switch S0?
  * If you don't want them enabled, don't define this.
  */
-#define CFG_LED_BASE 0x00000000
-#undef CFG_LED_BASE
+#define CONFIG_SYS_LED_BASE 0x00000000
+#undef CONFIG_SYS_LED_BASE
 
 /*
  * select serial console configuration
@@ -198,21 +198,21 @@
  * - RAM for BD/Buffers is on the local Bus (see 28-13)
  * - Enable Half Duplex in FSMR
  */
-# define CFG_CMXFCR_MASK	(CMXFCR_FC3|CMXFCR_RF3CS_MSK|CMXFCR_TF3CS_MSK)
-# define CFG_CMXFCR_VALUE	(CMXFCR_RF3CS_CLK15|CMXFCR_TF3CS_CLK16)
+# define CONFIG_SYS_CMXFCR_MASK	(CMXFCR_FC3|CMXFCR_RF3CS_MSK|CMXFCR_TF3CS_MSK)
+# define CONFIG_SYS_CMXFCR_VALUE	(CMXFCR_RF3CS_CLK15|CMXFCR_TF3CS_CLK16)
 
 /*
  * - RAM for BD/Buffers is on the local Bus (see 28-13)
  */
-#ifdef CFG_LSDRAM
-  #define CFG_CPMFCR_RAMTYPE	3
-#else /* CFG_LSDRAM */
-  #define CFG_CPMFCR_RAMTYPE	0
-#endif /* CFG_LSDRAM */
+#ifdef CONFIG_SYS_LSDRAM
+  #define CONFIG_SYS_CPMFCR_RAMTYPE	3
+#else /* CONFIG_SYS_LSDRAM */
+  #define CONFIG_SYS_CPMFCR_RAMTYPE	0
+#endif /* CONFIG_SYS_LSDRAM */
 
 /* - Enable Half Duplex in FSMR */
-/* # define CFG_FCC_PSMR		(FCC_PSMR_FDE|FCC_PSMR_LPB) */
-# define CFG_FCC_PSMR		0
+/* # define CONFIG_SYS_FCC_PSMR		(FCC_PSMR_FDE|FCC_PSMR_LPB) */
+# define CONFIG_SYS_FCC_PSMR		0
 
 #else /* CONFIG_ETHER_INDEX */
 # error "on EP8260 ethernet must be FCC3"
@@ -227,8 +227,8 @@
  */
 #undef  CONFIG_HARD_I2C			/* I2C with hardware support	*/
 #define CONFIG_SOFT_I2C		1	/* I2C bit-banged		*/
-#define CFG_I2C_SPEED		400000	/* I2C speed and slave address	*/
-#define CFG_I2C_SLAVE		0x7F
+#define CONFIG_SYS_I2C_SPEED		400000	/* I2C speed and slave address	*/
+#define CONFIG_SYS_I2C_SLAVE		0x7F
 
 /*
  * Software (bit-bang) I2C driver configuration
@@ -252,13 +252,13 @@
  * put in the same sector as U-Boot, and changing variables
  * will erase U-Boot temporarily
  */
-#define CFG_ENV_IN_OWN_SECT
+#define CONFIG_ENV_IN_OWN_SECT
 
 /* Define to allow the user to overwrite serial and ethaddr */
 #define CONFIG_ENV_OVERWRITE
 
 /* What should the console's baud rate be? */
-#ifdef CFG_EP8260_H2
+#ifdef CONFIG_SYS_EP8260_H2
 #define CONFIG_BAUDRATE         9600
 #else
 #define CONFIG_BAUDRATE         115200
@@ -274,10 +274,10 @@
 #define CONFIG_BOOTDELAY        -1
 
 /* undef this to save memory */
-#define CFG_LONGHELP
+#define CONFIG_SYS_LONGHELP
 
 /* Monitor Command Prompt       */
-#define CFG_PROMPT              "=> "
+#define CONFIG_SYS_PROMPT              "=> "
 
 /* Define this variable to enable the "hush" shell (from
    Busybox) as command line interpreter, thus enabling
@@ -287,8 +287,8 @@
    If undefined, you get the old, much simpler behaviour
    with a somewhat smapper memory footprint.
 */
-#define CFG_HUSH_PARSER
-#define CFG_PROMPT_HUSH_PS2	"> "
+#define CONFIG_SYS_HUSH_PARSER
+#define CONFIG_SYS_PROMPT_HUSH_PS2	"> "
 
 
 /*
@@ -327,11 +327,11 @@
 #undef CONFIG_CMD_XIMG
 
 /* Where do the internal registers live? */
-#define CFG_IMMR               0xF0000000
-#define CFG_DEFAULT_IMMR       0x00010000
+#define CONFIG_SYS_IMMR               0xF0000000
+#define CONFIG_SYS_DEFAULT_IMMR       0x00010000
 
 /* Where do the on board registers (CS4) live? */
-#define CFG_REGS_BASE          0xFA000000
+#define CONFIG_SYS_REGS_BASE          0xFA000000
 
 /*****************************************************************************
  *
@@ -348,35 +348,35 @@
  * Miscellaneous configurable options
  */
 #if defined(CONFIG_CMD_KGDB)
-#  define CFG_CBSIZE              1024       /* Console I/O Buffer Size      */
+#  define CONFIG_SYS_CBSIZE              1024       /* Console I/O Buffer Size      */
 #else
-#  define CFG_CBSIZE              256        /* Console I/O Buffer Size      */
+#  define CONFIG_SYS_CBSIZE              256        /* Console I/O Buffer Size      */
 #endif
 
 /* Print Buffer Size */
-#define CFG_PBSIZE        (CFG_CBSIZE + sizeof(CFG_PROMPT)+16)
+#define CONFIG_SYS_PBSIZE        (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT)+16)
 
-#define CFG_MAXARGS       8            /* max number of command args   */
+#define CONFIG_SYS_MAXARGS       8            /* max number of command args   */
 
-#define CFG_BARGSIZE      CFG_CBSIZE   /* Boot Argument Buffer Size    */
+#define CONFIG_SYS_BARGSIZE      CONFIG_SYS_CBSIZE   /* Boot Argument Buffer Size    */
 
-#ifdef CFG_LSDRAM
-  #define CFG_MEMTEST_START 0x04000000   /* memtest works on  */
-  #define CFG_MEMTEST_END   0x06000000   /* 64-96 MB in SDRAM */
+#ifdef CONFIG_SYS_LSDRAM
+  #define CONFIG_SYS_MEMTEST_START 0x04000000   /* memtest works on  */
+  #define CONFIG_SYS_MEMTEST_END   0x06000000   /* 64-96 MB in SDRAM */
 #else
-  #define CFG_MEMTEST_START 0x00000000   /* memtest works on  */
-  #define CFG_MEMTEST_END   0x02000000   /* 0-32 MB in SDRAM */
-#endif /* CFG_LSDRAM */
+  #define CONFIG_SYS_MEMTEST_START 0x00000000   /* memtest works on  */
+  #define CONFIG_SYS_MEMTEST_END   0x02000000   /* 0-32 MB in SDRAM */
+#endif /* CONFIG_SYS_LSDRAM */
 
 #define	CONFIG_CLOCKS_IN_MHZ	1      /* clocks passsed to Linux in MHz */
 
-#define CFG_LOAD_ADDR     0x00100000   /* default load address */
-#define CFG_TFTP_LOADADDR 0x00100000   /* default load address for network file downloads */
+#define CONFIG_SYS_LOAD_ADDR     0x00100000   /* default load address */
+#define CONFIG_SYS_TFTP_LOADADDR 0x00100000   /* default load address for network file downloads */
 
-#define CFG_HZ            1000         /* decrementer freq: 1 ms ticks */
+#define CONFIG_SYS_HZ            1000         /* decrementer freq: 1 ms ticks */
 
 /* valid baudrates */
-#define CFG_BAUDRATE_TABLE      { 9600, 19200, 38400, 57600, 115200 }
+#define CONFIG_SYS_BAUDRATE_TABLE      { 9600, 19200, 38400, 57600, 115200 }
 
 /*
  * Low Level Configuration Settings
@@ -384,119 +384,119 @@
  * You should know what you are doing if you make changes here.
  */
 
-#define CFG_FLASH_BASE    CFG_FLASH0_BASE
-#define CFG_SDRAM_BASE    CFG_SDRAM0_BASE
+#define CONFIG_SYS_FLASH_BASE    CONFIG_SYS_FLASH0_BASE
+#define CONFIG_SYS_SDRAM_BASE    CONFIG_SYS_SDRAM0_BASE
 
 /*-----------------------------------------------------------------------
  * Hard Reset Configuration Words
  */
 
-#if defined(CFG_SBC_BOOT_LOW)
-#  define  CFG_SBC_HRCW_BOOT_FLAGS  (HRCW_CIP | HRCW_BMS)
+#if defined(CONFIG_SYS_SBC_BOOT_LOW)
+#  define  CONFIG_SYS_SBC_HRCW_BOOT_FLAGS  (HRCW_CIP | HRCW_BMS)
 #else
-#  define  CFG_SBC_HRCW_BOOT_FLAGS  (0x00000000)
-#endif /* defined(CFG_SBC_BOOT_LOW) */
+#  define  CONFIG_SYS_SBC_HRCW_BOOT_FLAGS  (0x00000000)
+#endif /* defined(CONFIG_SYS_SBC_BOOT_LOW) */
 
-#ifdef CFG_EP8260_H2
-/* get the HRCW ISB field from CFG_DEFAULT_IMMR */
-#define CFG_SBC_HRCW_IMMR ( ((CFG_DEFAULT_IMMR & 0x10000000) >> 10) |\
-			    ((CFG_DEFAULT_IMMR & 0x01000000) >> 7)  |\
-			    ((CFG_DEFAULT_IMMR & 0x00100000) >> 4) )
+#ifdef CONFIG_SYS_EP8260_H2
+/* get the HRCW ISB field from CONFIG_SYS_DEFAULT_IMMR */
+#define CONFIG_SYS_SBC_HRCW_IMMR ( ((CONFIG_SYS_DEFAULT_IMMR & 0x10000000) >> 10) |\
+			    ((CONFIG_SYS_DEFAULT_IMMR & 0x01000000) >> 7)  |\
+			    ((CONFIG_SYS_DEFAULT_IMMR & 0x00100000) >> 4) )
 
-#define CFG_HRCW_MASTER (HRCW_EBM                |\
+#define CONFIG_SYS_HRCW_MASTER (HRCW_EBM                |\
 			 HRCW_L2CPC01            |\
-			 CFG_SBC_HRCW_IMMR       |\
+			 CONFIG_SYS_SBC_HRCW_IMMR       |\
 			 HRCW_APPC10             |\
 			 HRCW_CS10PC01           |\
-			 CFG_SBC_MODCK_H	 |\
-			 CFG_SBC_HRCW_BOOT_FLAGS)
+			 CONFIG_SYS_SBC_MODCK_H	 |\
+			 CONFIG_SYS_SBC_HRCW_BOOT_FLAGS)
 #else
-#define CFG_HRCW_MASTER 0x10400245
+#define CONFIG_SYS_HRCW_MASTER 0x10400245
 #endif
 
 /* no slaves */
-#define CFG_HRCW_SLAVE1 0
-#define CFG_HRCW_SLAVE2 0
-#define CFG_HRCW_SLAVE3 0
-#define CFG_HRCW_SLAVE4 0
-#define CFG_HRCW_SLAVE5 0
-#define CFG_HRCW_SLAVE6 0
-#define CFG_HRCW_SLAVE7 0
+#define CONFIG_SYS_HRCW_SLAVE1 0
+#define CONFIG_SYS_HRCW_SLAVE2 0
+#define CONFIG_SYS_HRCW_SLAVE3 0
+#define CONFIG_SYS_HRCW_SLAVE4 0
+#define CONFIG_SYS_HRCW_SLAVE5 0
+#define CONFIG_SYS_HRCW_SLAVE6 0
+#define CONFIG_SYS_HRCW_SLAVE7 0
 
 /*-----------------------------------------------------------------------
  * Definitions for initial stack pointer and data area (in DPRAM)
  */
-#define CFG_INIT_RAM_ADDR       CFG_IMMR
-#define CFG_INIT_RAM_END        0x4000  /* End of used area in DPRAM    */
-#define CFG_GBL_DATA_SIZE      128     /* bytes reserved for initial data */
-#define CFG_GBL_DATA_OFFSET    (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP_OFFSET      CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_INIT_RAM_ADDR       CONFIG_SYS_IMMR
+#define CONFIG_SYS_INIT_RAM_END        0x4000  /* End of used area in DPRAM    */
+#define CONFIG_SYS_GBL_DATA_SIZE      128     /* bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET    (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET      CONFIG_SYS_GBL_DATA_OFFSET
 
 /*-----------------------------------------------------------------------
  * Start addresses for the final memory configuration
  * (Set up by the startup code)
- * Please note that CFG_SDRAM_BASE _must_ start at 0
- * Note also that the logic that sets CFG_RAMBOOT is platform dependent.
+ * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
+ * Note also that the logic that sets CONFIG_SYS_RAMBOOT is platform dependent.
  */
-#define CFG_MONITOR_BASE          TEXT_BASE
+#define CONFIG_SYS_MONITOR_BASE          TEXT_BASE
 
 
-#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
-#  define CFG_RAMBOOT
+#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
+#  define CONFIG_SYS_RAMBOOT
 #endif
 
-#define CFG_MONITOR_LEN      (256 << 10)     /* Reserve 256 kB for Monitor   */
-#define CFG_MALLOC_LEN       (128 << 10)     /* Reserve 128 kB for malloc()  */
+#define CONFIG_SYS_MONITOR_LEN      (256 << 10)     /* Reserve 256 kB for Monitor   */
+#define CONFIG_SYS_MALLOC_LEN       (128 << 10)     /* Reserve 128 kB for malloc()  */
 
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define CFG_BOOTMAPSZ        (8 << 20)       /* Initial Memory map for Linux */
+#define CONFIG_SYS_BOOTMAPSZ        (8 << 20)       /* Initial Memory map for Linux */
 
 /*-----------------------------------------------------------------------
  * FLASH and environment organization
  */
-#define CFG_MAX_FLASH_BANKS   1       /* max number of memory banks         */
-#ifdef CFG_EP8260_H2
-#define CFG_MAX_FLASH_SECT    128      /* max number of sectors on one chip  */
+#define CONFIG_SYS_MAX_FLASH_BANKS   1       /* max number of memory banks         */
+#ifdef CONFIG_SYS_EP8260_H2
+#define CONFIG_SYS_MAX_FLASH_SECT    128      /* max number of sectors on one chip  */
 #else
-#define CFG_MAX_FLASH_SECT    71      /* max number of sectors on one chip  */
+#define CONFIG_SYS_MAX_FLASH_SECT    71      /* max number of sectors on one chip  */
 #endif
 
-#ifdef CFG_EP8260_H2
-#define CFG_FLASH_ERASE_TOUT  240000  /* Timeout for Flash Erase (in ms)    */
-#define CFG_FLASH_WRITE_TOUT  500     /* Timeout for Flash Write (in ms)    */
+#ifdef CONFIG_SYS_EP8260_H2
+#define CONFIG_SYS_FLASH_ERASE_TOUT  240000  /* Timeout for Flash Erase (in ms)    */
+#define CONFIG_SYS_FLASH_WRITE_TOUT  500     /* Timeout for Flash Write (in ms)    */
 #else
-#define CFG_FLASH_ERASE_TOUT  8000    /* Timeout for Flash Erase (in ms)    */
-#define CFG_FLASH_WRITE_TOUT  1       /* Timeout for Flash Write (in ms)    */
+#define CONFIG_SYS_FLASH_ERASE_TOUT  8000    /* Timeout for Flash Erase (in ms)    */
+#define CONFIG_SYS_FLASH_WRITE_TOUT  1       /* Timeout for Flash Write (in ms)    */
 #endif
 
-#ifndef CFG_RAMBOOT
-#  define CFG_ENV_IS_IN_FLASH  1
+#ifndef CONFIG_SYS_RAMBOOT
+#  define CONFIG_ENV_IS_IN_FLASH  1
 
-#  ifdef CFG_ENV_IN_OWN_SECT
-#    define CFG_ENV_ADDR       (CFG_MONITOR_BASE + 0x40000)
-#    define CFG_ENV_SECT_SIZE  0x40000
+#  ifdef CONFIG_ENV_IN_OWN_SECT
+#    define CONFIG_ENV_ADDR       (CONFIG_SYS_MONITOR_BASE + 0x40000)
+#    define CONFIG_ENV_SECT_SIZE  0x40000
 #  else
-#    define CFG_ENV_ADDR (CFG_FLASH_BASE + CFG_MONITOR_LEN - CFG_ENV_SECT_SIZE)
-#    define CFG_ENV_SIZE       0x1000  /* Total Size of Environment Sector */
-#    define CFG_ENV_SECT_SIZE  0x10000 /* see README - env sect real size */
-#  endif /* CFG_ENV_IN_OWN_SECT */
+#    define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + CONFIG_SYS_MONITOR_LEN - CONFIG_ENV_SECT_SIZE)
+#    define CONFIG_ENV_SIZE       0x1000  /* Total Size of Environment Sector */
+#    define CONFIG_ENV_SECT_SIZE  0x10000 /* see README - env sect real size */
+#  endif /* CONFIG_ENV_IN_OWN_SECT */
 #else
-#  define CFG_ENV_IS_IN_NVRAM  1
-#  define CFG_ENV_ADDR         (CFG_MONITOR_BASE - 0x1000)
-#  define CFG_ENV_SIZE         0x200
-#endif /* CFG_RAMBOOT */
+#  define CONFIG_ENV_IS_IN_NVRAM  1
+#  define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE - 0x1000)
+#  define CONFIG_ENV_SIZE         0x200
+#endif /* CONFIG_SYS_RAMBOOT */
 
 /*-----------------------------------------------------------------------
  * Cache Configuration
  */
-#define CFG_CACHELINE_SIZE      32      /* For MPC8260 CPU */
+#define CONFIG_SYS_CACHELINE_SIZE      32      /* For MPC8260 CPU */
 
 #if defined(CONFIG_CMD_KGDB)
-#  define CFG_CACHELINE_SHIFT     5     /* log base 2 of the above value */
+#  define CONFIG_SYS_CACHELINE_SHIFT     5     /* log base 2 of the above value */
 #endif
 
 /*-----------------------------------------------------------------------
@@ -509,38 +509,38 @@
  *
  * HID1 has only read-only information - nothing to set.
  */
-#define CFG_HID0_INIT   (HID0_ICE  |\
+#define CONFIG_SYS_HID0_INIT   (HID0_ICE  |\
 			 HID0_DCE  |\
 			 HID0_ICFI |\
 			 HID0_DCI  |\
 			 HID0_IFEM |\
 			 HID0_ABE)
-#ifdef CFG_LSDRAM
+#ifdef CONFIG_SYS_LSDRAM
 /* 8260 local bus is NOT cacheable */
-#define CFG_HID0_FINAL  (/*HID0_ICE  |*/\
+#define CONFIG_SYS_HID0_FINAL  (/*HID0_ICE  |*/\
 			 HID0_IFEM |\
 			 HID0_ABE  |\
 			 HID0_EMCP)
-#else /* !CFG_LSDRAM */
-#define CFG_HID0_FINAL  (HID0_ICE  |\
+#else /* !CONFIG_SYS_LSDRAM */
+#define CONFIG_SYS_HID0_FINAL  (HID0_ICE  |\
 			 HID0_IFEM |\
 			 HID0_ABE  |\
 			 HID0_EMCP)
-#endif /* CFG_LSDRAM */
+#endif /* CONFIG_SYS_LSDRAM */
 
-#define CFG_HID2        0
+#define CONFIG_SYS_HID2        0
 
 /*-----------------------------------------------------------------------
  * RMR - Reset Mode Register
  *-----------------------------------------------------------------------
  */
-#define CFG_RMR         0
+#define CONFIG_SYS_RMR         0
 
 /*-----------------------------------------------------------------------
  * BCR - Bus Configuration                                       4-25
  *-----------------------------------------------------------------------
  */
-#define CFG_BCR         (BCR_EBM   |\
+#define CONFIG_SYS_BCR         (BCR_EBM   |\
 			 BCR_PLDP  |\
 			 BCR_EAV   |\
 			 BCR_NPQM0)
@@ -549,7 +549,7 @@
  * SIUMCR - SIU Module Configuration                             4-31
  *-----------------------------------------------------------------------
  */
-#define CFG_SIUMCR      (SIUMCR_L2CPC01 |\
+#define CONFIG_SYS_SIUMCR      (SIUMCR_L2CPC01 |\
 			 SIUMCR_APPC10  |\
 			 SIUMCR_CS10PC01)
 
@@ -559,25 +559,25 @@
  *-----------------------------------------------------------------------
  * Watchdog & Bus Monitor Timer max, 60x Bus Monitor enable
  */
-#ifdef CFG_EP8260_H2
+#ifdef CONFIG_SYS_EP8260_H2
 /* TBD: Find out why setting the BMT to 0xff causes the FCC to
  * generate TX buffer underrun errors for large packets under
  * Linux
  */
-#define CFG_SYPCR_BMT	0x00000600
+#define CONFIG_SYS_SYPCR_BMT	0x00000600
 #else
-#define CFG_SYPCR_BMT	SYPCR_BMT
+#define CONFIG_SYS_SYPCR_BMT	SYPCR_BMT
 #endif
 
-#ifdef CFG_LSDRAM
-#define CFG_SYPCR       (SYPCR_SWTC |\
-			 CFG_SYPCR_BMT  |\
+#ifdef CONFIG_SYS_LSDRAM
+#define CONFIG_SYS_SYPCR       (SYPCR_SWTC |\
+			 CONFIG_SYS_SYPCR_BMT  |\
 			 SYPCR_PBME |\
 			 SYPCR_LBME |\
 			 SYPCR_SWP)
 #else
-#define CFG_SYPCR       (SYPCR_SWTC |\
-			 CFG_SYPCR_BMT  |\
+#define CONFIG_SYS_SYPCR       (SYPCR_SWTC |\
+			 CONFIG_SYS_SYPCR_BMT  |\
 			 SYPCR_PBME |\
 			 SYPCR_SWP)
 #endif
@@ -588,7 +588,7 @@
  * Clear once per Second and Alarm Interrupt Status, Set 32KHz timersclk,
  * and enable Time Counter
  */
-#define CFG_TMCNTSC     (TMCNTSC_SEC |\
+#define CONFIG_SYS_TMCNTSC     (TMCNTSC_SEC |\
 			 TMCNTSC_ALR |\
 			 TMCNTSC_TCF |\
 			 TMCNTSC_TCE)
@@ -599,35 +599,35 @@
  * Clear Periodic Interrupt Status, Set 32KHz timersclk, and enable
  * Periodic timer
  */
-#ifdef CFG_EP8260_H2
-#define CFG_PISCR       (PISCR_PS  |\
+#ifdef CONFIG_SYS_EP8260_H2
+#define CONFIG_SYS_PISCR       (PISCR_PS  |\
 			 PISCR_PTF |\
 			 PISCR_PTE)
 #else
-#define CFG_PISCR	0
+#define CONFIG_SYS_PISCR	0
 #endif
 
 /*-----------------------------------------------------------------------
  * SCCR - System Clock Control                                   9-8
  *-----------------------------------------------------------------------
  */
-#ifdef CFG_EP8260_H2
-#define CFG_SCCR        (SCCR_DFBRG00)
+#ifdef CONFIG_SYS_EP8260_H2
+#define CONFIG_SYS_SCCR        (SCCR_DFBRG00)
 #else
-#define CFG_SCCR        (SCCR_DFBRG01)
+#define CONFIG_SYS_SCCR        (SCCR_DFBRG01)
 #endif
 
 /*-----------------------------------------------------------------------
  * RCCR - RISC Controller Configuration                         13-7
  *-----------------------------------------------------------------------
  */
-#define CFG_RCCR        0
+#define CONFIG_SYS_RCCR        0
 
 /*-----------------------------------------------------------------------
  * MPTPR - Memory Refresh Timer Prescale Register               10-32
  *-----------------------------------------------------------------------
  */
-#define CFG_MPTPR	(0x0A00 & MPTPR_PTP_MSK)
+#define CONFIG_SYS_MPTPR	(0x0A00 & MPTPR_PTP_MSK)
 
 /*
  * Init Memory Controller:
@@ -659,13 +659,13 @@
 /* Bank 0 - FLASH
  *
  */
-#define CFG_BR0_PRELIM  ((CFG_FLASH0_BASE & BRx_BA_MSK) |\
+#define CONFIG_SYS_BR0_PRELIM  ((CONFIG_SYS_FLASH0_BASE & BRx_BA_MSK) |\
 			 BRx_PS_64                      |\
 			 BRx_DECC_NONE                  |\
 			 BRx_MS_GPCM_P                  |\
 			 BRx_V)
 
-#define CFG_OR0_PRELIM  (MEG_TO_AM(CFG_FLASH0_SIZE)     |\
+#define CONFIG_SYS_OR0_PRELIM  (MEG_TO_AM(CONFIG_SYS_FLASH0_SIZE)     |\
 			 ORxG_CSNT                      |\
 			 ORxG_ACS_DIV1                  |\
 			 ORxG_SCY_8_CLK                 |\
@@ -674,71 +674,71 @@
 /* Bank 1 - SDRAM
  * PSDRAM
  */
-#define CFG_BR1_PRELIM  ((CFG_SDRAM0_BASE & BRx_BA_MSK) |\
+#define CONFIG_SYS_BR1_PRELIM  ((CONFIG_SYS_SDRAM0_BASE & BRx_BA_MSK) |\
 			 BRx_PS_64                      |\
 			 BRx_MS_SDRAM_P                 |\
 			 BRx_V)
 
-#define CFG_OR1_PRELIM  (MEG_TO_AM(CFG_SDRAM0_SIZE)     |\
+#define CONFIG_SYS_OR1_PRELIM  (MEG_TO_AM(CONFIG_SYS_SDRAM0_SIZE)     |\
 			 ORxS_BPD_4                     |\
 			 ORxS_ROWST_PBI1_A6             |\
 			 ORxS_NUMR_12)
 
-#ifdef CFG_EP8260_H2
-#define CFG_PSDMR       0xC34E246E
+#ifdef CONFIG_SYS_EP8260_H2
+#define CONFIG_SYS_PSDMR       0xC34E246E
 #else
-#define CFG_PSDMR       0xC34E2462
+#define CONFIG_SYS_PSDMR       0xC34E2462
 #endif
 
-#define CFG_PSRT	0x64
+#define CONFIG_SYS_PSRT	0x64
 
-#ifdef CFG_LSDRAM
+#ifdef CONFIG_SYS_LSDRAM
 /* Bank 2 - SDRAM
  * LSDRAM
  */
 
-  #define CFG_BR2_PRELIM  ((CFG_SDRAM1_BASE & BRx_BA_MSK) |\
+  #define CONFIG_SYS_BR2_PRELIM  ((CONFIG_SYS_SDRAM1_BASE & BRx_BA_MSK) |\
 			   BRx_PS_32                      |\
 			   BRx_MS_SDRAM_L                 |\
 			   BRx_V)
 
-  #define CFG_OR2_PRELIM  (MEG_TO_AM(CFG_SDRAM1_SIZE)     |\
+  #define CONFIG_SYS_OR2_PRELIM  (MEG_TO_AM(CONFIG_SYS_SDRAM1_SIZE)     |\
 			   ORxS_BPD_4                     |\
 			   ORxS_ROWST_PBI0_A9             |\
 			   ORxS_NUMR_12)
 
-  #define CFG_LSDMR      0x416A2562
-  #define CFG_LSRT	0x64
+  #define CONFIG_SYS_LSDMR      0x416A2562
+  #define CONFIG_SYS_LSRT	0x64
 #else
-  #define CFG_LSRT	0x0
-#endif /* CFG_LSDRAM */
+  #define CONFIG_SYS_LSRT	0x0
+#endif /* CONFIG_SYS_LSDRAM */
 
 /* Bank 4 - On board registers
  * NVRTC and BCSR
  */
-#define CFG_BR4_PRELIM   ((CFG_REGS_BASE & BRx_BA_MSK)  |\
+#define CONFIG_SYS_BR4_PRELIM   ((CONFIG_SYS_REGS_BASE & BRx_BA_MSK)  |\
 			   BRx_PS_8                     |\
 			   BRx_MS_GPCM_P                |\
 			   BRx_V)
 /*
-#define CFG_OR4_PRELIM    (ORxG_AM_MSK                 |\
+#define CONFIG_SYS_OR4_PRELIM    (ORxG_AM_MSK                 |\
 			   ORxG_CSNT                   |\
 			   ORxG_ACS_DIV1               |\
 			   ORxG_SCY_10_CLK              |\
 			   ORxG_TRLX)
 */
-#define CFG_OR4_PRELIM 0xfff00854
+#define CONFIG_SYS_OR4_PRELIM 0xfff00854
 
 #ifdef _NOT_USED_SINCE_NOT_WORKING_
 /* Bank 8 - On board registers
  * PCMCIA (currently not working!)
  */
-#define CFG_BR8_PRELIM   ((CFG_REGS_BASE & BRx_BA_MSK)  |\
+#define CONFIG_SYS_BR8_PRELIM   ((CONFIG_SYS_REGS_BASE & BRx_BA_MSK)  |\
 			   BRx_PS_16                     |\
 			   BRx_MS_GPCM_P                |\
 			   BRx_V)
 
-#define CFG_OR8_PRELIM    (ORxG_AM_MSK                 |\
+#define CONFIG_SYS_OR8_PRELIM    (ORxG_AM_MSK                 |\
 			   ORxG_CSNT                   |\
 			   ORxG_ACS_DIV1               |\
 			   ORxG_SETA                   |\
diff --git a/include/configs/ep82xxm.h b/include/configs/ep82xxm.h
index ac68c869a..239ff6733 100644
--- a/include/configs/ep82xxm.h
+++ b/include/configs/ep82xxm.h
@@ -48,7 +48,7 @@
 #undef	CONFIG_CONS_NONE		/* It's not on external UART */
 #define CONFIG_CONS_INDEX	1	/* SMC1 is used for console  */
 
-#define CFG_BCSR		0xFA000000
+#define CONFIG_SYS_BCSR		0xFA000000
 
 /*
  * Select ethernet configuration
@@ -70,13 +70,13 @@
 #define CONFIG_ETHER_ON_FCC2
 #define CONFIG_ETHER_ON_FCC3
 
-#define CFG_CMXFCR_MASK3	(CMXFCR_FC3 | CMXFCR_RF3CS_MSK | CMXFCR_TF3CS_MSK)
-#define CFG_CMXFCR_VALUE3	(CMXFCR_RF3CS_CLK15 | CMXFCR_TF3CS_CLK16)
-#define CFG_CMXFCR_MASK2	(CMXFCR_FC2 | CMXFCR_RF2CS_MSK | CMXFCR_TF2CS_MSK)
-#define CFG_CMXFCR_VALUE2	(CMXFCR_RF2CS_CLK13 | CMXFCR_TF2CS_CLK14)
+#define CONFIG_SYS_CMXFCR_MASK3	(CMXFCR_FC3 | CMXFCR_RF3CS_MSK | CMXFCR_TF3CS_MSK)
+#define CONFIG_SYS_CMXFCR_VALUE3	(CMXFCR_RF3CS_CLK15 | CMXFCR_TF3CS_CLK16)
+#define CONFIG_SYS_CMXFCR_MASK2	(CMXFCR_FC2 | CMXFCR_RF2CS_MSK | CMXFCR_TF2CS_MSK)
+#define CONFIG_SYS_CMXFCR_VALUE2	(CMXFCR_RF2CS_CLK13 | CMXFCR_TF2CS_CLK14)
 
-#define CFG_CPMFCR_RAMTYPE	0
-#define CFG_FCC_PSMR		(FCC_PSMR_FDE | FCC_PSMR_LPB)
+#define CONFIG_SYS_CPMFCR_RAMTYPE	0
+#define CONFIG_SYS_FCC_PSMR		(FCC_PSMR_FDE | FCC_PSMR_LPB)
 
 #define CONFIG_MII			/* MII PHY management        */
 #define CONFIG_BITBANGMII		/* Bit-banged MDIO interface */
@@ -85,15 +85,15 @@
  * GPIO pins used for bit-banged MII communications
  */
 #define MDIO_PORT		0	/* Not used - implemented in BCSR */
-#define MDIO_ACTIVE		(*(vu_char *)(CFG_BCSR + 8) &= 0xFB)
-#define MDIO_TRISTATE		(*(vu_char *)(CFG_BCSR + 8) |= 0x04)
-#define MDIO_READ		(*(vu_char *)(CFG_BCSR + 8) & 1)
+#define MDIO_ACTIVE		(*(vu_char *)(CONFIG_SYS_BCSR + 8) &= 0xFB)
+#define MDIO_TRISTATE		(*(vu_char *)(CONFIG_SYS_BCSR + 8) |= 0x04)
+#define MDIO_READ		(*(vu_char *)(CONFIG_SYS_BCSR + 8) & 1)
 
-#define MDIO(bit)		if(bit) *(vu_char *)(CFG_BCSR + 8) |= 0x01; \
-				else	*(vu_char *)(CFG_BCSR + 8) &= 0xFE
+#define MDIO(bit)		if(bit) *(vu_char *)(CONFIG_SYS_BCSR + 8) |= 0x01; \
+				else	*(vu_char *)(CONFIG_SYS_BCSR + 8) &= 0xFE
 
-#define MDC(bit)		if(bit) *(vu_char *)(CFG_BCSR + 8) |= 0x02; \
-				else	*(vu_char *)(CFG_BCSR + 8) &= 0xFD
+#define MDC(bit)		if(bit) *(vu_char *)(CONFIG_SYS_BCSR + 8) |= 0x02; \
+				else	*(vu_char *)(CONFIG_SYS_BCSR + 8) &= 0xFD
 
 #define MIIDELAY		udelay(1)
 
@@ -104,7 +104,7 @@
 
 #define CONFIG_BAUDRATE		115200
 
-#define CFG_VXWORKS_MAC_PTR 0x4300 /* Pass Ethernet MAC to VxWorks */
+#define CONFIG_SYS_VXWORKS_MAC_PTR 0x4300 /* Pass Ethernet MAC to VxWorks */
 
 
 /*
@@ -144,7 +144,7 @@
 #define CONFIG_GATEWAYIP	10.0.0.1
 #define CONFIG_NETMASK		255.255.255.0
 #define CONFIG_BOOTDELAY	5	/* autoboot after 5 seconds */
-#define CFG_ENV_IN_OWN_SECT	1
+#define CONFIG_ENV_IN_OWN_SECT	1
 #define CONFIG_AUTO_COMPLETE	1
 #define	CONFIG_EXTRA_ENV_SETTINGS	"ethprime=FCC3 ETHERNET"
 
@@ -162,27 +162,27 @@
 /*
  * Miscellaneous configurable options
  */
-#define CFG_HUSH_PARSER
-#define CFG_PROMPT_HUSH_PS2	"> "
-#define CFG_LONGHELP			/* undef to save memory	    */
-#define CFG_PROMPT		"ep82xxm=> "	/* Monitor Command Prompt   */
+#define CONFIG_SYS_HUSH_PARSER
+#define CONFIG_SYS_PROMPT_HUSH_PS2	"> "
+#define CONFIG_SYS_LONGHELP			/* undef to save memory	    */
+#define CONFIG_SYS_PROMPT		"ep82xxm=> "	/* Monitor Command Prompt   */
 #if defined(CONFIG_CMD_KGDB)
-#define CFG_CBSIZE		1024	/* Console I/O Buffer Size  */
+#define CONFIG_SYS_CBSIZE		1024	/* Console I/O Buffer Size  */
 #else
-#define CFG_CBSIZE		256	/* Console I/O Buffer Size  */
+#define CONFIG_SYS_CBSIZE		256	/* Console I/O Buffer Size  */
 #endif
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16)	/* Print Buffer Size  */
-#define CFG_MAXARGS		16		/* max number of command args */
-#define CFG_BARGSIZE		CFG_CBSIZE	/* Boot Argument Buffer Size  */
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)	/* Print Buffer Size  */
+#define CONFIG_SYS_MAXARGS		16		/* max number of command args */
+#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size  */
 
-#define CFG_MEMTEST_START	0x00100000	/* memtest works on */
-#define CFG_MEMTEST_END		0x00f00000	/* 1 ... 15 MB in DRAM	*/
+#define CONFIG_SYS_MEMTEST_START	0x00100000	/* memtest works on */
+#define CONFIG_SYS_MEMTEST_END		0x00f00000	/* 1 ... 15 MB in DRAM	*/
 
-#define CFG_LOAD_ADDR		0x100000	/* default load address */
+#define CONFIG_SYS_LOAD_ADDR		0x100000	/* default load address */
 
-#define CFG_HZ			1000	/* decrementer freq: 1 ms ticks */
+#define CONFIG_SYS_HZ			1000	/* decrementer freq: 1 ms ticks */
 
-#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
 
 /*-----------------------------------------------------------------------
  * Environment
@@ -192,60 +192,59 @@
  * Note: DENX encourages to use redundant environment in FLASH.
  */
 #if 1
-#define CFG_ENV_IS_IN_FLASH     1	/* use FLASH for environment vars	*/
+#define CONFIG_ENV_IS_IN_FLASH     1	/* use FLASH for environment vars	*/
 #else
-#define CFG_ENV_IS_IN_EEPROM	1	/* use EEPROM for environment vars	*/
+#define CONFIG_ENV_IS_IN_EEPROM	1	/* use EEPROM for environment vars	*/
 #endif
 
 /*-----------------------------------------------------------------------
  * FLASH related
  *----------------------------------------------------------------------*/
-#define CFG_FLASH_BASE		0xFC000000
-#define CFG_FLASH_CFI
+#define CONFIG_SYS_FLASH_BASE		0xFC000000
+#define CONFIG_SYS_FLASH_CFI
 #define CONFIG_FLASH_CFI_DRIVER
-#define CFG_MAX_FLASH_BANKS	1	/* max num of flash banks	*/
-#define CFG_MAX_FLASH_SECT	512	/* max num of sects on one chip */
-#define CFG_FLASH_EMPTY_INFO		/* print 'E' for empty sector in flinfo */
+#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max num of flash banks	*/
+#define CONFIG_SYS_MAX_FLASH_SECT	512	/* max num of sects on one chip */
+#define CONFIG_SYS_FLASH_EMPTY_INFO		/* print 'E' for empty sector in flinfo */
 
-#ifdef CFG_ENV_IS_IN_FLASH
-#define CFG_ENV_SECT_SIZE	0x20000
-#define CFG_ENV_ADDR		(CFG_MONITOR_BASE + CFG_MONITOR_LEN)
-#endif /* CFG_ENV_IS_IN_FLASH */
+#ifdef CONFIG_ENV_IS_IN_FLASH
+#define CONFIG_ENV_SECT_SIZE	0x20000
+#define CONFIG_ENV_ADDR		(CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)
+#endif /* CONFIG_ENV_IS_IN_FLASH */
 
 /*-----------------------------------------------------------------------
  * I2C
  *----------------------------------------------------------------------*/
 /* EEPROM Configuration */
-#define CFG_EEPROM_SIZE	0x1000
-#define CFG_I2C_EEPROM_ADDR	0x54
-#define CFG_I2C_EEPROM_ADDR_LEN	1
-#define CFG_EEPROM_PAGE_WRITE_BITS	3
-#define CFG_EEPROM_PAGE_WRITE_ENABLE
-#define CFG_EEPROM_PAGE_WRITE_DELAY_MS	10
-
-#ifdef CFG_ENV_IS_IN_EEPROM
-#define CFG_ENV_SIZE		0x200	    /* Size of Environment vars */
-#define CFG_ENV_OFFSET		0x0
-#endif /* CFG_ENV_IS_IN_EEPROM */
+#define CONFIG_SYS_EEPROM_SIZE	0x1000
+#define CONFIG_SYS_I2C_EEPROM_ADDR	0x54
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN	1
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS	3
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	10
+
+#ifdef CONFIG_ENV_IS_IN_EEPROM
+#define CONFIG_ENV_SIZE		0x200	    /* Size of Environment vars */
+#define CONFIG_ENV_OFFSET		0x0
+#endif /* CONFIG_ENV_IS_IN_EEPROM */
 
 /* RTC Configuration */
 #define CONFIG_RTC_M41T11	1	/* uses a M41T81 */
-#define CFG_I2C_RTC_ADDR	0x68
+#define CONFIG_SYS_I2C_RTC_ADDR	0x68
 #define CONFIG_M41T11_BASE_YEAR	1900
 
 /* I2C SYSMON (LM75) */
 #define CONFIG_DTT_LM75		1
 #define CONFIG_DTT_SENSORS	{0}
-#define CFG_DTT_MAX_TEMP	70
-#define CFG_DTT_LOW_TEMP	-30
-#define	CFG_DTT_HYSTERESIS	3
+#define CONFIG_SYS_DTT_MAX_TEMP	70
+#define CONFIG_SYS_DTT_LOW_TEMP	-30
+#define	CONFIG_SYS_DTT_HYSTERESIS	3
 
 /*-----------------------------------------------------------------------
  * NVRAM Configuration
  *-----------------------------------------------------------------------
  */
-#define CFG_NVRAM_BASE_ADDR	0xFA080000
-#define CFG_NVRAM_SIZE		(128*1024)-16
+#define CONFIG_SYS_NVRAM_BASE_ADDR	0xFA080000
+#define CONFIG_SYS_NVRAM_SIZE		(128*1024)-16
 
 
 /*-----------------------------------------------------------------------
@@ -259,9 +258,9 @@
 #define CONFIG_PCI_BOOTDELAY	0
 
 /* PCI Memory map (if different from default map */
-#define CFG_PCI_SLV_MEM_LOCAL	CFG_SDRAM_BASE		/* Local base */
-#define CFG_PCI_SLV_MEM_BUS		0x00000000	/* PCI base */
-#define CFG_PICMR0_MASK_ATTRIB	(PICMR_MASK_512MB | PICMR_ENABLE | \
+#define CONFIG_SYS_PCI_SLV_MEM_LOCAL	CONFIG_SYS_SDRAM_BASE		/* Local base */
+#define CONFIG_SYS_PCI_SLV_MEM_BUS		0x00000000	/* PCI base */
+#define CONFIG_SYS_PICMR0_MASK_ATTRIB	(PICMR_MASK_512MB | PICMR_ENABLE | \
 				 PICMR_PREFETCH_EN)
 
 /*
@@ -277,11 +276,11 @@
  * in the bridge.
  */
 
-#define CFG_PCI_MSTR_MEM_LOCAL	0x80000000          /* Local base */
-#define CFG_PCI_MSTR_MEM_BUS	0x80000000          /* PCI base   */
-#define	CFG_CPU_PCI_MEM_START	PCI_MSTR_MEM_LOCAL
-#define CFG_PCI_MSTR_MEM_SIZE	0x20000000          /* 512MB */
-#define CFG_POCMR0_MASK_ATTRIB	(POCMR_MASK_512MB | POCMR_ENABLE | POCMR_PREFETCH_EN)
+#define CONFIG_SYS_PCI_MSTR_MEM_LOCAL	0x80000000          /* Local base */
+#define CONFIG_SYS_PCI_MSTR_MEM_BUS	0x80000000          /* PCI base   */
+#define	CONFIG_SYS_CPU_PCI_MEM_START	PCI_MSTR_MEM_LOCAL
+#define CONFIG_SYS_PCI_MSTR_MEM_SIZE	0x20000000          /* 512MB */
+#define CONFIG_SYS_POCMR0_MASK_ATTRIB	(POCMR_MASK_512MB | POCMR_ENABLE | POCMR_PREFETCH_EN)
 
 /*
  * Master window that allows the CPU to access PCI Memory (non-prefetch).
@@ -289,11 +288,11 @@
  * in the bridge.
  */
 
-#define CFG_PCI_MSTR_MEMIO_LOCAL    0xA0000000          /* Local base */
-#define CFG_PCI_MSTR_MEMIO_BUS      0xA0000000          /* PCI base   */
-#define CFG_CPU_PCI_MEMIO_START     PCI_MSTR_MEMIO_LOCAL
-#define CFG_PCI_MSTR_MEMIO_SIZE     0x20000000          /* 512MB */
-#define CFG_POCMR1_MASK_ATTRIB      (POCMR_MASK_512MB | POCMR_ENABLE)
+#define CONFIG_SYS_PCI_MSTR_MEMIO_LOCAL    0xA0000000          /* Local base */
+#define CONFIG_SYS_PCI_MSTR_MEMIO_BUS      0xA0000000          /* PCI base   */
+#define CONFIG_SYS_CPU_PCI_MEMIO_START     PCI_MSTR_MEMIO_LOCAL
+#define CONFIG_SYS_PCI_MSTR_MEMIO_SIZE     0x20000000          /* 512MB */
+#define CONFIG_SYS_POCMR1_MASK_ATTRIB      (POCMR_MASK_512MB | POCMR_ENABLE)
 
 /*
  * Master window that allows the CPU to access PCI IO space.
@@ -301,105 +300,105 @@
  * in the bridge.
  */
 
-#define CFG_PCI_MSTR_IO_LOCAL       0xF6000000          /* Local base */
-#define CFG_PCI_MSTR_IO_BUS         0x00000000          /* PCI base   */
-#define CFG_CPU_PCI_IO_START        PCI_MSTR_IO_LOCAL
-#define CFG_PCI_MSTR_IO_SIZE        0x02000000          /* 64MB */
-#define CFG_POCMR2_MASK_ATTRIB      (POCMR_MASK_32MB | POCMR_ENABLE | POCMR_PCI_IO)
+#define CONFIG_SYS_PCI_MSTR_IO_LOCAL       0xF6000000          /* Local base */
+#define CONFIG_SYS_PCI_MSTR_IO_BUS         0x00000000          /* PCI base   */
+#define CONFIG_SYS_CPU_PCI_IO_START        PCI_MSTR_IO_LOCAL
+#define CONFIG_SYS_PCI_MSTR_IO_SIZE        0x02000000          /* 64MB */
+#define CONFIG_SYS_POCMR2_MASK_ATTRIB      (POCMR_MASK_32MB | POCMR_ENABLE | POCMR_PCI_IO)
 
 
 /* PCIBR0 - for PCI IO*/
-#define CFG_PCI_MSTR0_LOCAL		CFG_PCI_MSTR_IO_LOCAL		/* Local base */
-#define CFG_PCIMSK0_MASK		~(CFG_PCI_MSTR_IO_SIZE - 1U)	/* Size of window */
+#define CONFIG_SYS_PCI_MSTR0_LOCAL		CONFIG_SYS_PCI_MSTR_IO_LOCAL		/* Local base */
+#define CONFIG_SYS_PCIMSK0_MASK		~(CONFIG_SYS_PCI_MSTR_IO_SIZE - 1U)	/* Size of window */
 /* PCIBR1 - prefetch and non-prefetch regions joined together */
-#define CFG_PCI_MSTR1_LOCAL		CFG_PCI_MSTR_MEM_LOCAL
-#define CFG_PCIMSK1_MASK		~(CFG_PCI_MSTR_MEM_SIZE + CFG_PCI_MSTR_MEMIO_SIZE - 1U)
+#define CONFIG_SYS_PCI_MSTR1_LOCAL		CONFIG_SYS_PCI_MSTR_MEM_LOCAL
+#define CONFIG_SYS_PCIMSK1_MASK		~(CONFIG_SYS_PCI_MSTR_MEM_SIZE + CONFIG_SYS_PCI_MSTR_MEMIO_SIZE - 1U)
 
 
-#define	CFG_DIRECT_FLASH_TFTP
+#define	CONFIG_SYS_DIRECT_FLASH_TFTP
 
 #if defined(CONFIG_CMD_JFFS2)
-#define CFG_JFFS2_FIRST_BANK	0
-#define CFG_JFFS2_NUM_BANKS	CFG_MAX_FLASH_BANKS
-#define CFG_JFFS2_FIRST_SECTOR  0
-#define CFG_JFFS2_LAST_SECTOR   62
-#define CFG_JFFS2_SORT_FRAGMENTS
-#define CFG_JFFS_CUSTOM_PART
+#define CONFIG_SYS_JFFS2_FIRST_BANK	0
+#define CONFIG_SYS_JFFS2_NUM_BANKS	CONFIG_SYS_MAX_FLASH_BANKS
+#define CONFIG_SYS_JFFS2_FIRST_SECTOR  0
+#define CONFIG_SYS_JFFS2_LAST_SECTOR   62
+#define CONFIG_SYS_JFFS2_SORT_FRAGMENTS
+#define CONFIG_SYS_JFFS_CUSTOM_PART
 #endif
 
 #if defined(CONFIG_CMD_I2C)
 #define CONFIG_HARD_I2C		1	/* To enable I2C support	*/
-#define CFG_I2C_SPEED		100000	/* I2C speed			*/
-#define CFG_I2C_SLAVE		0x7F	/* I2C slave address		*/
+#define CONFIG_SYS_I2C_SPEED		100000	/* I2C speed			*/
+#define CONFIG_SYS_I2C_SLAVE		0x7F	/* I2C slave address		*/
 #endif
 
-#define CFG_MONITOR_BASE	TEXT_BASE
-#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
-#define CFG_RAMBOOT
+#define CONFIG_SYS_MONITOR_BASE	TEXT_BASE
+#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
+#define CONFIG_SYS_RAMBOOT
 #endif
 
-#define CFG_MONITOR_LEN		(512 << 10)	/* Reserve 256KB for Monitor */
+#define CONFIG_SYS_MONITOR_LEN		(512 << 10)	/* Reserve 256KB for Monitor */
 
-#define CFG_DEFAULT_IMMR	0x00010000
-#define CFG_IMMR		0xF0000000
+#define CONFIG_SYS_DEFAULT_IMMR	0x00010000
+#define CONFIG_SYS_IMMR		0xF0000000
 
-#define CFG_INIT_RAM_ADDR	CFG_IMMR
-#define CFG_INIT_RAM_END	0x2000	/* End of used area in DPRAM	*/
-#define CFG_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_IMMR
+#define CONFIG_SYS_INIT_RAM_END	0x2000	/* End of used area in DPRAM	*/
+#define CONFIG_SYS_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
 
 /* Hard reset configuration word */
-#define CFG_HRCW_MASTER		0 /*0x1C800641*/  /* Not used - provided by CPLD */
+#define CONFIG_SYS_HRCW_MASTER		0 /*0x1C800641*/  /* Not used - provided by CPLD */
 /* No slaves */
-#define CFG_HRCW_SLAVE1		0
-#define CFG_HRCW_SLAVE2		0
-#define CFG_HRCW_SLAVE3		0
-#define CFG_HRCW_SLAVE4		0
-#define CFG_HRCW_SLAVE5		0
-#define CFG_HRCW_SLAVE6		0
-#define CFG_HRCW_SLAVE7		0
+#define CONFIG_SYS_HRCW_SLAVE1		0
+#define CONFIG_SYS_HRCW_SLAVE2		0
+#define CONFIG_SYS_HRCW_SLAVE3		0
+#define CONFIG_SYS_HRCW_SLAVE4		0
+#define CONFIG_SYS_HRCW_SLAVE5		0
+#define CONFIG_SYS_HRCW_SLAVE6		0
+#define CONFIG_SYS_HRCW_SLAVE7		0
 
 #define BOOTFLAG_COLD		0x01	/* Normal Power-On: Boot from FLASH */
 #define BOOTFLAG_WARM		0x02	/* Software reboot                  */
 
-#define CFG_MALLOC_LEN		(4096 << 10)	/* Reserve 4 MB for malloc()	*/
-#define CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
+#define CONFIG_SYS_MALLOC_LEN		(4096 << 10)	/* Reserve 4 MB for malloc()	*/
+#define CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
 
-#define CFG_CACHELINE_SIZE	32	/* For MPC8260 CPUs */
+#define CONFIG_SYS_CACHELINE_SIZE	32	/* For MPC8260 CPUs */
 #if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value */
+#define CONFIG_SYS_CACHELINE_SHIFT	5	/* log base 2 of the above value */
 #endif
 
-#define CFG_HID0_INIT		0
-#define CFG_HID0_FINAL		0
+#define CONFIG_SYS_HID0_INIT		0
+#define CONFIG_SYS_HID0_FINAL		0
 
-#define CFG_HID2		0
+#define CONFIG_SYS_HID2		0
 
-#define CFG_SIUMCR		0x02610000
-#define CFG_SYPCR		0xFFFF0689
-#define CFG_BCR			0x8080E000
-#define CFG_SCCR		0x00000001
+#define CONFIG_SYS_SIUMCR		0x02610000
+#define CONFIG_SYS_SYPCR		0xFFFF0689
+#define CONFIG_SYS_BCR			0x8080E000
+#define CONFIG_SYS_SCCR		0x00000001
 
-#define CFG_RMR			0
-#define CFG_TMCNTSC		0x000000C3
-#define CFG_PISCR		0x00000083
-#define CFG_RCCR		0
+#define CONFIG_SYS_RMR			0
+#define CONFIG_SYS_TMCNTSC		0x000000C3
+#define CONFIG_SYS_PISCR		0x00000083
+#define CONFIG_SYS_RCCR		0
 
-#define CFG_MPTPR		0x0A00
-#define CFG_PSDMR		0xC432246E
-#define CFG_PSRT		0x32
+#define CONFIG_SYS_MPTPR		0x0A00
+#define CONFIG_SYS_PSDMR		0xC432246E
+#define CONFIG_SYS_PSRT		0x32
 
-#define CFG_SDRAM_BASE		0x00000000
-#define CFG_SDRAM_BR		(CFG_SDRAM_BASE | 0x00000041)
-#define CFG_SDRAM_OR		0xF0002900
+#define CONFIG_SYS_SDRAM_BASE		0x00000000
+#define CONFIG_SYS_SDRAM_BR		(CONFIG_SYS_SDRAM_BASE | 0x00000041)
+#define CONFIG_SYS_SDRAM_OR		0xF0002900
 
-#define CFG_BR0_PRELIM		(CFG_FLASH_BASE | 0x00001801)
-#define CFG_OR0_PRELIM		0xFC000882
-#define CFG_BR4_PRELIM		(CFG_BCSR | 0x00001001)
-#define CFG_OR4_PRELIM		0xFFF00050
+#define CONFIG_SYS_BR0_PRELIM		(CONFIG_SYS_FLASH_BASE | 0x00001801)
+#define CONFIG_SYS_OR0_PRELIM		0xFC000882
+#define CONFIG_SYS_BR4_PRELIM		(CONFIG_SYS_BCSR | 0x00001001)
+#define CONFIG_SYS_OR4_PRELIM		0xFFF00050
 
-#define CFG_RESET_ADDRESS	0xFFF00100
+#define CONFIG_SYS_RESET_ADDRESS	0xFFF00100
 
 #endif /* __CONFIG_H */
diff --git a/include/configs/evb4510.h b/include/configs/evb4510.h
index 1571477d0..cbaae6205 100644
--- a/include/configs/evb4510.h
+++ b/include/configs/evb4510.h
@@ -51,8 +51,8 @@
 /*
  * Size of malloc() pool
  */
-#define CFG_MALLOC_LEN		(CFG_ENV_SIZE + 128*1024)
-#define CFG_GBL_DATA_SIZE	128
+#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + 128*1024)
+#define CONFIG_SYS_GBL_DATA_SIZE	128
 
 /*
  * Hardware drivers
@@ -108,29 +108,29 @@
 /*
  * Miscellaneous configurable options
  */
-#define CFG_LONGHELP				/* undef to save memory */
-#define CFG_PROMPT		"evb4510 # "	/* Monitor Command Prompt */
-#define CFG_CBSIZE		256		/* Console I/O Buffer Size */
-#define CFG_PBSIZE		(CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define CFG_MAXARGS		16		/* max number of command args */
-#define CFG_BARGSIZE		CFG_CBSIZE	/* Boot Argument Buffer Size */
+#define CONFIG_SYS_LONGHELP				/* undef to save memory */
+#define CONFIG_SYS_PROMPT		"evb4510 # "	/* Monitor Command Prompt */
+#define CONFIG_SYS_CBSIZE		256		/* Console I/O Buffer Size */
+#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS		16		/* max number of command args */
+#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size */
 
 #define CONFIG_CMDLINE_TAG                      /* allow passing of command line args to linux */
 #define CONFIG_SETUP_MEMORY_TAGS
 #define CONFIG_INITRD_TAG
 
-#define CFG_MEMTEST_START	0x00000000	/* memtest works on	*/
-#define CFG_MEMTEST_END		0x00780000	/* 4 ... 8 MB in DRAM	*/
+#define CONFIG_SYS_MEMTEST_START	0x00000000	/* memtest works on	*/
+#define CONFIG_SYS_MEMTEST_END		0x00780000	/* 4 ... 8 MB in DRAM	*/
 
-#undef	CFG_CLKS_IN_HZ		/* everything, incl board info, in Hz */
+#undef	CONFIG_SYS_CLKS_IN_HZ		/* everything, incl board info, in Hz */
 
-#define CFG_LOAD_ADDR		0x00000000	/* default load address */
+#define CONFIG_SYS_LOAD_ADDR		0x00000000	/* default load address */
 
-#define CFG_SYS_CLK_FREQ	50000000	/* CPU freq: 50 MHz */
-#define CFG_HZ			1000		/* decrementer freq: 1 KHz */
+#define CONFIG_SYS_SYS_CLK_FREQ	50000000	/* CPU freq: 50 MHz */
+#define CONFIG_SYS_HZ			1000		/* decrementer freq: 1 KHz */
 
 						/* valid baudrates */
-#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
 
 /*-----------------------------------------------------------------------
  * Stack sizes
@@ -156,26 +156,26 @@
 #define PHYS_FLASH_2		0x02000000 /* Flash Bank #2 */
 #define PHYS_FLASH_2_SIZE	0x00080000 /* 512KB (one chip, 8bit access) */
 
-#define CFG_FLASH_BASE		PHYS_FLASH_1
-#define CFG_FLASH_SIZE		PHYS_FLASH_1_SIZE
+#define CONFIG_SYS_FLASH_BASE		PHYS_FLASH_1
+#define CONFIG_SYS_FLASH_SIZE		PHYS_FLASH_1_SIZE
 
 /*-----------------------------------------------------------------------
  * FLASH and environment organization
  */
-#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks */
-#define CFG_MAX_FLASH_SECT	35	/* max number of sectors on one chip */
-#define CFG_MAIN_SECT_SIZE	0x00010000  /* main size of sectors on one chip */
+#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks */
+#define CONFIG_SYS_MAX_FLASH_SECT	35	/* max number of sectors on one chip */
+#define CONFIG_SYS_MAIN_SECT_SIZE	0x00010000  /* main size of sectors on one chip */
 
 /* timeout values are in ticks */
-#define CFG_FLASH_ERASE_TOUT	(4*CFG_HZ) /* Timeout for Flash Erase */
-#define CFG_FLASH_WRITE_TOUT	(2*CFG_HZ) /* Timeout for Flash Write */
+#define CONFIG_SYS_FLASH_ERASE_TOUT	(4*CONFIG_SYS_HZ) /* Timeout for Flash Erase */
+#define CONFIG_SYS_FLASH_WRITE_TOUT	(2*CONFIG_SYS_HZ) /* Timeout for Flash Write */
 
 /* environment settings */
-#define CFG_ENV_IS_IN_FLASH
-#undef CFG_ENV_IS_NOWHERE
+#define CONFIG_ENV_IS_IN_FLASH
+#undef CONFIG_ENV_IS_NOWHERE
 
-#define CFG_ENV_ADDR		(CFG_FLASH_BASE + 0x20000) /* environment start address */
-#define CFG_ENV_SECT_SIZE	0x10000	   /* Total Size of Environment Sector */
-#define CFG_ENV_SIZE		0x1000	   /* max size for environment */
+#define CONFIG_ENV_ADDR		(CONFIG_SYS_FLASH_BASE + 0x20000) /* environment start address */
+#define CONFIG_ENV_SECT_SIZE	0x10000	   /* Total Size of Environment Sector */
+#define CONFIG_ENV_SIZE		0x1000	   /* max size for environment */
 
 #endif	/* __CONFIG_H */
diff --git a/include/configs/favr-32-ezkit.h b/include/configs/favr-32-ezkit.h
index 3c9420cf9..21802df1d 100644
--- a/include/configs/favr-32-ezkit.h
+++ b/include/configs/favr-32-ezkit.h
@@ -35,40 +35,40 @@
  * Timer clock frequency. We're using the CPU-internal COUNT register
  * for this, so this is equivalent to the CPU core clock frequency
  */
-#define CFG_HZ				1000
+#define CONFIG_SYS_HZ				1000
 
 /*
  * Set up the PLL to run at 140 MHz, the CPU to run at the PLL
  * frequency, the HSB and PBB at 1/2, and the PBA to run at 1/4 the
  * PLL frequency.
- * (CFG_OSC0_HZ * CFG_PLL0_MUL) / CFG_PLL0_DIV = PLL MHz
+ * (CONFIG_SYS_OSC0_HZ * CONFIG_SYS_PLL0_MUL) / CONFIG_SYS_PLL0_DIV = PLL MHz
  */
 #define CONFIG_PLL			1
-#define CFG_POWER_MANAGER		1
-#define CFG_OSC0_HZ			20000000
-#define CFG_PLL0_DIV			1
-#define CFG_PLL0_MUL			7
-#define CFG_PLL0_SUPPRESS_CYCLES	16
+#define CONFIG_SYS_POWER_MANAGER		1
+#define CONFIG_SYS_OSC0_HZ			20000000
+#define CONFIG_SYS_PLL0_DIV			1
+#define CONFIG_SYS_PLL0_MUL			7
+#define CONFIG_SYS_PLL0_SUPPRESS_CYCLES	16
 /*
  * Set the CPU running at:
- * PLL / (2^CFG_CLKDIV_CPU) = CPU MHz
+ * PLL / (2^CONFIG_SYS_CLKDIV_CPU) = CPU MHz
  */
-#define CFG_CLKDIV_CPU			0
+#define CONFIG_SYS_CLKDIV_CPU			0
 /*
  * Set the HSB running at:
- * PLL / (2^CFG_CLKDIV_HSB) = HSB MHz
+ * PLL / (2^CONFIG_SYS_CLKDIV_HSB) = HSB MHz
  */
-#define CFG_CLKDIV_HSB			1
+#define CONFIG_SYS_CLKDIV_HSB			1
 /*
  * Set the PBA running at:
- * PLL / (2^CFG_CLKDIV_PBA) = PBA MHz
+ * PLL / (2^CONFIG_SYS_CLKDIV_PBA) = PBA MHz
  */
-#define CFG_CLKDIV_PBA			2
+#define CONFIG_SYS_CLKDIV_PBA			2
 /*
  * Set the PBB running at:
- * PLL / (2^CFG_CLKDIV_PBB) = PBB MHz
+ * PLL / (2^CONFIG_SYS_CLKDIV_PBB) = PBB MHz
  */
-#define CFG_CLKDIV_PBB			1
+#define CONFIG_SYS_CLKDIV_PBB			1
 
 /*
  * The PLLOPT register controls the PLL like this:
@@ -77,7 +77,7 @@
  *
  * We want icp=1 (default) and ivco=0 (80-160 MHz) or ivco=2 (150-240MHz).
  */
-#define CFG_PLL0_OPT			0x04
+#define CONFIG_SYS_PLL0_OPT			0x04
 
 #undef CONFIG_USART0
 #undef CONFIG_USART1
@@ -147,55 +147,55 @@
 #define CONFIG_ATMEL_USART		1
 #define CONFIG_MACB			1
 #define CONFIG_PORTMUX_PIO		1
-#define CFG_NR_PIOS			5
-#define CFG_HSDRAMC			1
+#define CONFIG_SYS_NR_PIOS			5
+#define CONFIG_SYS_HSDRAMC			1
 #define CONFIG_MMC			1
 #define CONFIG_ATMEL_MCI		1
 
-#define CFG_DCACHE_LINESZ		32
-#define CFG_ICACHE_LINESZ		32
+#define CONFIG_SYS_DCACHE_LINESZ		32
+#define CONFIG_SYS_ICACHE_LINESZ		32
 
 #define CONFIG_NR_DRAM_BANKS		1
 
 /* External flash on Favr-32 */
 #if 0
-#define CFG_FLASH_CFI			1
-#define CFG_FLASH_CFI_DRIVER		1
+#define CONFIG_SYS_FLASH_CFI			1
+#define CONFIG_FLASH_CFI_DRIVER		1
 #endif
 
-#define CFG_FLASH_BASE			0x00000000
-#define CFG_FLASH_SIZE			0x800000
-#define CFG_MAX_FLASH_BANKS		1
-#define CFG_MAX_FLASH_SECT		135
+#define CONFIG_SYS_FLASH_BASE			0x00000000
+#define CONFIG_SYS_FLASH_SIZE			0x800000
+#define CONFIG_SYS_MAX_FLASH_BANKS		1
+#define CONFIG_SYS_MAX_FLASH_SECT		135
 
-#define CFG_MONITOR_BASE		CFG_FLASH_BASE
+#define CONFIG_SYS_MONITOR_BASE		CONFIG_SYS_FLASH_BASE
 
-#define CFG_INTRAM_BASE			INTERNAL_SRAM_BASE
-#define CFG_INTRAM_SIZE			INTERNAL_SRAM_SIZE
-#define CFG_SDRAM_BASE			EBI_SDRAM_BASE
+#define CONFIG_SYS_INTRAM_BASE			INTERNAL_SRAM_BASE
+#define CONFIG_SYS_INTRAM_SIZE			INTERNAL_SRAM_SIZE
+#define CONFIG_SYS_SDRAM_BASE			EBI_SDRAM_BASE
 
-#define CFG_ENV_IS_IN_FLASH		1
-#define CFG_ENV_SIZE			65536
-#define CFG_ENV_ADDR			(CFG_FLASH_BASE + CFG_FLASH_SIZE - CFG_ENV_SIZE)
+#define CONFIG_ENV_IS_IN_FLASH		1
+#define CONFIG_ENV_SIZE			65536
+#define CONFIG_ENV_ADDR			(CONFIG_SYS_FLASH_BASE + CONFIG_SYS_FLASH_SIZE - CONFIG_ENV_SIZE)
 
-#define CFG_INIT_SP_ADDR		(CFG_INTRAM_BASE + CFG_INTRAM_SIZE)
+#define CONFIG_SYS_INIT_SP_ADDR		(CONFIG_SYS_INTRAM_BASE + CONFIG_SYS_INTRAM_SIZE)
 
-#define CFG_MALLOC_LEN			(256*1024)
-#define CFG_DMA_ALLOC_LEN		(16384)
+#define CONFIG_SYS_MALLOC_LEN			(256*1024)
+#define CONFIG_SYS_DMA_ALLOC_LEN		(16384)
 
 /* Allow 4MB for the kernel run-time image */
-#define CFG_LOAD_ADDR			(EBI_SDRAM_BASE + 0x00400000)
-#define CFG_BOOTPARAMS_LEN		(16 * 1024)
+#define CONFIG_SYS_LOAD_ADDR			(EBI_SDRAM_BASE + 0x00400000)
+#define CONFIG_SYS_BOOTPARAMS_LEN		(16 * 1024)
 
 /* Other configuration settings that shouldn't have to change all that often */
-#define CFG_PROMPT			"U-Boot> "
-#define CFG_CBSIZE			256
-#define CFG_MAXARGS			16
-#define CFG_PBSIZE			(CFG_CBSIZE + sizeof(CFG_PROMPT) + 16)
-#define CFG_LONGHELP			1
-
-#define CFG_MEMTEST_START		EBI_SDRAM_BASE
-#define CFG_MEMTEST_END			(CFG_MEMTEST_START + 0x700000)
-#define CFG_BAUDRATE_TABLE { 115200, 38400, 19200, 9600, 2400 }
+#define CONFIG_SYS_PROMPT			"U-Boot> "
+#define CONFIG_SYS_CBSIZE			256
+#define CONFIG_SYS_MAXARGS			16
+#define CONFIG_SYS_PBSIZE			(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
+#define CONFIG_SYS_LONGHELP			1
+
+#define CONFIG_SYS_MEMTEST_START		EBI_SDRAM_BASE
+#define CONFIG_SYS_MEMTEST_END			(CONFIG_SYS_MEMTEST_START + 0x700000)
+#define CONFIG_SYS_BAUDRATE_TABLE { 115200, 38400, 19200, 9600, 2400 }
 
 #endif /* __CONFIG_H */
diff --git a/include/configs/fx12mm.h b/include/configs/fx12mm.h
new file mode 100644
index 000000000..58445674c
--- /dev/null
+++ b/include/configs/fx12mm.h
@@ -0,0 +1,66 @@
+/*
+ * (C) Copyright 2008
+ *
+ * Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@uam.es
+ * This work has been supported by: QTechnology  http://qtec.com
+ *
+ * Georg Schardt <schardt@team-ctech.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * Configuration file for the Virtex4FX12 Minimodul by Avnet/Memec,
+ * see http://www.em.avnet.com
+ */
+
+#ifndef __CONFIG_FX12_H
+#define __CONFIG_FX12_H
+
+#include "../board/avnet/fx12mm/xparameters.h"
+
+/* cmd config */
+#define CONFIG_CMD_JFFS2
+#define CONFIG_JFFS2_CMDLINE
+#undef CONFIG_CMD_NET
+
+/* sdram */
+#define CONFIG_SYS_SDRAM_SIZE_MB       64
+
+/* environment */
+#define CONFIG_ENV_IS_IN_FLASH  1
+#define CONFIG_ENV_SIZE         0x10000
+#define CONFIG_ENV_SECT_SIZE    0x10000
+#define CONFIG_SYS_ENV_OFFSET   0xA0000
+#define CONFIG_ENV_ADDR         (CONFIG_SYS_FLASH_BASE+CONFIG_SYS_ENV_OFFSET)
+#define CONFIG_ENV_OVERWRITE 	1
+
+/*Misc*/
+#define CONFIG_SYS_PROMPT	"FX12MM:/# " /* Monitor Command Prompt */
+#define CONFIG_PREBOOT      	"echo U-Boot is up and running;"
+
+/*Flash*/
+#define CONFIG_SYS_FLASH_SIZE          (4*1024*1024)
+#define CONFIG_SYS_MAX_FLASH_SECT      71
+#define MTDIDS_DEFAULT		"nor0=fx12mm-flash"
+#define MTDPARTS_DEFAULT	"mtdparts=fx12mm-flash:-(user)"
+
+#include "configs/xilinx-ppc405.h"
+
+#endif	/* __CONFIG_H */
diff --git a/include/configs/gcplus.h b/include/configs/gcplus.h
index 1d9c05b72..c0b3ab91e 100644
--- a/include/configs/gcplus.h
+++ b/include/configs/gcplus.h
@@ -57,8 +57,8 @@
 /*
  * Size of malloc() pool
  */
-#define CFG_MALLOC_LEN          (CFG_ENV_SIZE + 128*1024)
-#define CFG_GBL_DATA_SIZE       128     /* size rsrvd for initial data */
+#define CONFIG_SYS_MALLOC_LEN          (CONFIG_ENV_SIZE + 128*1024)
+#define CONFIG_SYS_GBL_DATA_SIZE       128     /* size rsrvd for initial data */
 
 
 /*
@@ -98,7 +98,7 @@
 #define CONFIG_BOOTDELAY	3
 #define CONFIG_BOOTARGS		"console=ttySA0,38400n8 mtdparts=sa1100-flash:1m@0(zImage),3m@1m(ramdisk.gz),12m@4m(userfs) root=/dev/nfs ip=bootp"
 #define CONFIG_BOOTCOMMAND	"bootp;tftp;bootm"
-#define CFG_AUTOLOAD            "n"             /* No autoload */
+#define CONFIG_SYS_AUTOLOAD            "n"             /* No autoload */
 
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	38400		/* speed to run kgdb serial port */
@@ -108,25 +108,25 @@
 /*
  * Miscellaneous configurable options
  */
-#define	CFG_LONGHELP				/* undef to save memory		*/
-#define	CFG_PROMPT		"ADS GCPlus # "	/* Monitor Command Prompt	*/
-#define	CFG_CBSIZE		256		/* Console I/O Buffer Size	*/
-#define	CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define	CFG_MAXARGS		16		/* max number of command args	*/
-#define CFG_BARGSIZE		CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+#define	CONFIG_SYS_LONGHELP				/* undef to save memory		*/
+#define	CONFIG_SYS_PROMPT		"ADS GCPlus # "	/* Monitor Command Prompt	*/
+#define	CONFIG_SYS_CBSIZE		256		/* Console I/O Buffer Size	*/
+#define	CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define	CONFIG_SYS_MAXARGS		16		/* max number of command args	*/
+#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
 
-#define CFG_MEMTEST_START	0xc0400000	/* memtest works on	*/
-#define CFG_MEMTEST_END		0xc0800000	/* 4 ... 8 MB in DRAM	*/
+#define CONFIG_SYS_MEMTEST_START	0xc0400000	/* memtest works on	*/
+#define CONFIG_SYS_MEMTEST_END		0xc0800000	/* 4 ... 8 MB in DRAM	*/
 
-#undef  CFG_CLKS_IN_HZ		/* everything, incl board info, in Hz */
+#undef  CONFIG_SYS_CLKS_IN_HZ		/* everything, incl board info, in Hz */
 
-#define	CFG_LOAD_ADDR		0xc0000000	/* default load address	*/
+#define	CONFIG_SYS_LOAD_ADDR		0xc0000000	/* default load address	*/
 
-#define	CFG_HZ			3686400		/* incrementer freq: 3.6864 MHz */
-#define CFG_CPUSPEED		0x0a		/* set core clock to 206MHz */
+#define	CONFIG_SYS_HZ			3686400		/* incrementer freq: 3.6864 MHz */
+#define CONFIG_SYS_CPUSPEED		0x0a		/* set core clock to 206MHz */
 
 						/* valid baudrates */
-#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
 
 /*-----------------------------------------------------------------------
  * Stack sizes
@@ -154,32 +154,32 @@
 #define PHYS_FLASH_BANK_SIZE    0x01000000 /* 16 MB Banks */
 #define PHYS_FLASH_SECT_SIZE    0x00040000 /* 256 KB sectors (x2) */
 
-#define CFG_FLASH_BASE		PHYS_FLASH_1
+#define CONFIG_SYS_FLASH_BASE		PHYS_FLASH_1
 
 /*-----------------------------------------------------------------------
  * FLASH and environment organization
  */
 #if	1
-#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks */
-#define CFG_MAX_FLASH_SECT	128	/* max number of sectors on one chip */
+#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks */
+#define CONFIG_SYS_MAX_FLASH_SECT	128	/* max number of sectors on one chip */
 
 /* timeout values are in ticks */
-#define CFG_FLASH_ERASE_TOUT	(2*CFG_HZ) /* Timeout for Flash Erase */
-#define CFG_FLASH_WRITE_TOUT	(2*CFG_HZ) /* Timeout for Flash Write */
+#define CONFIG_SYS_FLASH_ERASE_TOUT	(2*CONFIG_SYS_HZ) /* Timeout for Flash Erase */
+#define CONFIG_SYS_FLASH_WRITE_TOUT	(2*CONFIG_SYS_HZ) /* Timeout for Flash Write */
 #else
 /* REVISIT: This doesn't work on ADS GCPlus just yet: */
-#define CFG_FLASH_CFI           1       /* flash is CFI conformant      */
+#define CONFIG_SYS_FLASH_CFI           1       /* flash is CFI conformant      */
 #define CONFIG_FLASH_CFI_DRIVER    1       /* use common cfi driver        */
-#define CFG_FLASH_USE_BUFFER_WRITE 1    /* use buffered writes (20x faster) */
-#define CFG_MAX_FLASH_BANKS     1       /* max # of memory banks        */
-#define CFG_FLASH_INCREMENT     0       /* there is only one bank       */
-#define CFG_MAX_FLASH_SECT      128     /* max # of sectors on one chip */
-/*#define CFG_FLASH_PROTECTION    1       /--* hardware flash protection    */
-#define CFG_FLASH_BANKS_LIST    { CFG_FLASH_BASE }
+#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1    /* use buffered writes (20x faster) */
+#define CONFIG_SYS_MAX_FLASH_BANKS     1       /* max # of memory banks        */
+#define CONFIG_SYS_FLASH_INCREMENT     0       /* there is only one bank       */
+#define CONFIG_SYS_MAX_FLASH_SECT      128     /* max # of sectors on one chip */
+/*#define CONFIG_SYS_FLASH_PROTECTION    1       /--* hardware flash protection    */
+#define CONFIG_SYS_FLASH_BANKS_LIST    { CONFIG_SYS_FLASH_BASE }
 #endif
 
-#define	CFG_ENV_IS_IN_FLASH	1
-#define CFG_ENV_ADDR		(PHYS_FLASH_1 + PHYS_FLASH_SECT_SIZE)	/* Addr of Environment Sector	*/
-#define CFG_ENV_SIZE		PHYS_FLASH_SECT_SIZE
+#define	CONFIG_ENV_IS_IN_FLASH	1
+#define CONFIG_ENV_ADDR		(PHYS_FLASH_1 + PHYS_FLASH_SECT_SIZE)	/* Addr of Environment Sector	*/
+#define CONFIG_ENV_SIZE		PHYS_FLASH_SECT_SIZE
 
 #endif	/* __CONFIG_H */
diff --git a/include/configs/gr_cpci_ax2000.h b/include/configs/gr_cpci_ax2000.h
index 942609f8c..bbe635b9f 100644
--- a/include/configs/gr_cpci_ax2000.h
+++ b/include/configs/gr_cpci_ax2000.h
@@ -61,13 +61,13 @@
 #define CONFIG_SYS_CLK_FREQ	20000000	/* 20MHz */
 
 /* Number of SPARC register windows */
-#define CFG_SPARC_NWINDOWS 8
+#define CONFIG_SYS_SPARC_NWINDOWS 8
 
 /*
  * Serial console configuration
  */
 #define CONFIG_BAUDRATE		38400	/* ... at 38400 bps */
-#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
 
 /* Partitions */
 #define CONFIG_DOS_PARTITION
@@ -192,38 +192,38 @@
  *               0xFF000000 for 16 MB
  *               0xFF800000 for  8 MB
  */
-/*#define CFG_NO_FLASH		1*/
-#define CFG_FLASH_BASE		0x00000000
-#define CFG_FLASH_SIZE		0x00800000
+/*#define CONFIG_SYS_NO_FLASH		1*/
+#define CONFIG_SYS_FLASH_BASE		0x00000000
+#define CONFIG_SYS_FLASH_SIZE		0x00800000
 
 #define PHYS_FLASH_SECT_SIZE	0x00020000	/* 128 KB sectors */
-#define CFG_MAX_FLASH_SECT	64	/* max num of sects on one chip */
-#define CFG_MAX_FLASH_BANKS	1	/* max num of memory banks      */
+#define CONFIG_SYS_MAX_FLASH_SECT	64	/* max num of sects on one chip */
+#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max num of memory banks      */
 
-#define CFG_FLASH_ERASE_TOUT	240000	/* Flash Erase Timeout (in ms)  */
-#define CFG_FLASH_WRITE_TOUT	500	/* Flash Write Timeout (in ms)  */
-#define CFG_FLASH_LOCK_TOUT	5	/* Timeout for Flash Set Lock Bit (in ms) */
-#define CFG_FLASH_UNLOCK_TOUT	10000	/* Timeout for Flash Clear Lock Bits (in ms) */
-#define CFG_FLASH_PROTECTION	/* "Real" (hardware) sectors protection */
+#define CONFIG_SYS_FLASH_ERASE_TOUT	240000	/* Flash Erase Timeout (in ms)  */
+#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Flash Write Timeout (in ms)  */
+#define CONFIG_SYS_FLASH_LOCK_TOUT	5	/* Timeout for Flash Set Lock Bit (in ms) */
+#define CONFIG_SYS_FLASH_UNLOCK_TOUT	10000	/* Timeout for Flash Clear Lock Bits (in ms) */
+#define CONFIG_SYS_FLASH_PROTECTION	/* "Real" (hardware) sectors protection */
 
 /*** CFI CONFIG ***/
-#define CFG_FLASH_CFI_WIDTH	FLASH_CFI_8BIT
+#define CONFIG_SYS_FLASH_CFI_WIDTH	FLASH_CFI_8BIT
 #define CONFIG_FLASH_CFI_DRIVER
-#define CFG_FLASH_CFI
+#define CONFIG_SYS_FLASH_CFI
 /* Bypass cache when reading regs from flash memory */
-#define CFG_FLASH_CFI_BYPASS_READ
+#define CONFIG_SYS_FLASH_CFI_BYPASS_READ
 /* Buffered writes (32byte/go) instead of single accesses */
-#define CFG_FLASH_USE_BUFFER_WRITE
+#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
 
 /*
  * Environment settings
  */
-/*#define CFG_ENV_IS_NOWHERE 1*/
-#define CFG_ENV_IS_IN_FLASH	1
-/* CFG_ENV_ADDR need to be at sector boundary */
-#define CFG_ENV_SIZE		0x8000
-#define CFG_ENV_SECT_SIZE	0x20000
-#define CFG_ENV_ADDR		(CFG_FLASH_BASE+CFG_FLASH_SIZE-CFG_ENV_SECT_SIZE)
+/*#define CONFIG_ENV_IS_NOWHERE 1*/
+#define CONFIG_ENV_IS_IN_FLASH	1
+/* CONFIG_ENV_ADDR need to be at sector boundary */
+#define CONFIG_ENV_SIZE		0x8000
+#define CONFIG_ENV_SECT_SIZE	0x20000
+#define CONFIG_ENV_ADDR		(CONFIG_SYS_FLASH_BASE+CONFIG_SYS_FLASH_SIZE-CONFIG_ENV_SECT_SIZE)
 #define CONFIG_ENV_OVERWRITE	1
 
 /*
@@ -235,59 +235,59 @@
  */
 
 #if CONFIG_LEON_RAM_SELECT == CONFIG_LEON_RAM_SDRAM_NOSRAM
-#define CFG_SDRAM_BASE		0x40000000
+#define CONFIG_SYS_SDRAM_BASE		0x40000000
 #else
-#define CFG_SDRAM_BASE		0x60000000
+#define CONFIG_SYS_SDRAM_BASE		0x60000000
 #endif
 
-#define CFG_SDRAM_SIZE		0x08000000
-#define CFG_SDRAM_END		(CFG_SDRAM_BASE+CFG_SDRAM_SIZE)
+#define CONFIG_SYS_SDRAM_SIZE		0x08000000
+#define CONFIG_SYS_SDRAM_END		(CONFIG_SYS_SDRAM_BASE+CONFIG_SYS_SDRAM_SIZE)
 
 /* 4Mb SRAM available */
 #if CONFIG_LEON_RAM_SELECT != CONFIG_LEON_RAM_SDRAM_NOSRAM
-#define CFG_SRAM_BASE 0x40000000
-#define CFG_SRAM_SIZE 0x400000
-#define CFG_SRAM_END  (CFG_SRAM_BASE+CFG_SRAM_SIZE)
+#define CONFIG_SYS_SRAM_BASE 0x40000000
+#define CONFIG_SYS_SRAM_SIZE 0x400000
+#define CONFIG_SYS_SRAM_END  (CONFIG_SYS_SRAM_BASE+CONFIG_SYS_SRAM_SIZE)
 #endif
 
 /* Select RAM used to run U-BOOT from... */
 #if CONFIG_LEON_RAM_SELECT == CONFIG_LEON_RAM_SRAM
-#define CFG_RAM_BASE CFG_SRAM_BASE
-#define CFG_RAM_SIZE CFG_SRAM_SIZE
-#define CFG_RAM_END CFG_SRAM_END
+#define CONFIG_SYS_RAM_BASE CONFIG_SYS_SRAM_BASE
+#define CONFIG_SYS_RAM_SIZE CONFIG_SYS_SRAM_SIZE
+#define CONFIG_SYS_RAM_END CONFIG_SYS_SRAM_END
 #else
-#define CFG_RAM_BASE CFG_SDRAM_BASE
-#define CFG_RAM_SIZE CFG_SDRAM_SIZE
-#define CFG_RAM_END CFG_SDRAM_END
+#define CONFIG_SYS_RAM_BASE CONFIG_SYS_SDRAM_BASE
+#define CONFIG_SYS_RAM_SIZE CONFIG_SYS_SDRAM_SIZE
+#define CONFIG_SYS_RAM_END CONFIG_SYS_SDRAM_END
 #endif
 
-#define CFG_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
-#define CFG_GBL_DATA_OFFSET	(CFG_RAM_END - CFG_GBL_DATA_SIZE)
+#define CONFIG_SYS_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
 
-#define CFG_PROM_SIZE		(8192-CFG_GBL_DATA_SIZE)
-#define CFG_PROM_OFFSET		(CFG_GBL_DATA_OFFSET-CFG_PROM_SIZE)
+#define CONFIG_SYS_PROM_SIZE		(8192-CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_PROM_OFFSET		(CONFIG_SYS_GBL_DATA_OFFSET-CONFIG_SYS_PROM_SIZE)
 
-#define CFG_INIT_SP_OFFSET	(CFG_PROM_OFFSET-32)
-#define CFG_STACK_SIZE		(0x10000-32)
+#define CONFIG_SYS_INIT_SP_OFFSET	(CONFIG_SYS_PROM_OFFSET-32)
+#define CONFIG_SYS_STACK_SIZE		(0x10000-32)
 
-#define CFG_MONITOR_BASE    TEXT_BASE
-#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
-#   define CFG_RAMBOOT		1
+#define CONFIG_SYS_MONITOR_BASE    TEXT_BASE
+#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
+#   define CONFIG_SYS_RAMBOOT		1
 #endif
 
-#define CFG_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor   */
-#define CFG_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()  */
-#define CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
+#define CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor   */
+#define CONFIG_SYS_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()  */
+#define CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
 
-#define CFG_MALLOC_END		(CFG_INIT_SP_OFFSET-CFG_STACK_SIZE)
-#define CFG_MALLOC_BASE		(CFG_MALLOC_END-CFG_MALLOC_LEN)
+#define CONFIG_SYS_MALLOC_END		(CONFIG_SYS_INIT_SP_OFFSET-CONFIG_SYS_STACK_SIZE)
+#define CONFIG_SYS_MALLOC_BASE		(CONFIG_SYS_MALLOC_END-CONFIG_SYS_MALLOC_LEN)
 
 /* relocated monitor area */
-#define CFG_RELOC_MONITOR_MAX_END   CFG_MALLOC_BASE
-#define CFG_RELOC_MONITOR_BASE     (CFG_RELOC_MONITOR_MAX_END-CFG_MONITOR_LEN)
+#define CONFIG_SYS_RELOC_MONITOR_MAX_END   CONFIG_SYS_MALLOC_BASE
+#define CONFIG_SYS_RELOC_MONITOR_BASE     (CONFIG_SYS_RELOC_MONITOR_MAX_END-CONFIG_SYS_MONITOR_LEN)
 
 /* make un relocated address from relocated address */
-#define UN_RELOC(address) (address-(CFG_RELOC_MONITOR_BASE-TEXT_BASE))
+#define UN_RELOC(address) (address-(CONFIG_SYS_RELOC_MONITOR_BASE-TEXT_BASE))
 
 /*
  * Ethernet configuration uses on board SMC91C111
@@ -305,23 +305,23 @@
 /*
  * Miscellaneous configurable options
  */
-#define CFG_LONGHELP		/* undef to save memory     */
-#define CFG_PROMPT		"=> "	/* Monitor Command Prompt   */
+#define CONFIG_SYS_LONGHELP		/* undef to save memory     */
+#define CONFIG_SYS_PROMPT		"=> "	/* Monitor Command Prompt   */
 #if defined(CONFIG_CMD_KGDB)
-#define CFG_CBSIZE		1024	/* Console I/O Buffer Size  */
+#define CONFIG_SYS_CBSIZE		1024	/* Console I/O Buffer Size  */
 #else
-#define CFG_CBSIZE		256	/* Console I/O Buffer Size  */
+#define CONFIG_SYS_CBSIZE		256	/* Console I/O Buffer Size  */
 #endif
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16)	/* Print Buffer Size */
-#define CFG_MAXARGS		16	/* max number of command args   */
-#define CFG_BARGSIZE		CFG_CBSIZE	/* Boot Argument Buffer Size    */
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)	/* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS		16	/* max number of command args   */
+#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size    */
 
-#define CFG_MEMTEST_START	0x00100000	/* memtest works on */
-#define CFG_MEMTEST_END		0x00f00000	/* 1 ... 15 MB in DRAM  */
+#define CONFIG_SYS_MEMTEST_START	0x00100000	/* memtest works on */
+#define CONFIG_SYS_MEMTEST_END		0x00f00000	/* 1 ... 15 MB in DRAM  */
 
-#define CFG_LOAD_ADDR		0x100000	/* default load address */
+#define CONFIG_SYS_LOAD_ADDR		0x100000	/* default load address */
 
-#define CFG_HZ			1000	/* decrementer freq: 1 ms ticks */
+#define CONFIG_SYS_HZ			1000	/* decrementer freq: 1 ms ticks */
 
 /*
  * Various low-level settings
@@ -337,38 +337,38 @@
 /***** Gaisler GRLIB IP-Cores Config ********/
 
 /* AMBA Plug & Play info display on startup */
-/*#define CFG_AMBAPP_PRINT_ON_STARTUP*/
+/*#define CONFIG_SYS_AMBAPP_PRINT_ON_STARTUP*/
 
-#define CFG_GRLIB_SDRAM    0
+#define CONFIG_SYS_GRLIB_SDRAM    0
 
 /* See, GRLIB Docs (grip.pdf) on how to set up
  * These the memory controller registers.
  */
-#define CFG_GRLIB_MEMCFG1   (0x10f800ff | (1<<11))
+#define CONFIG_SYS_GRLIB_MEMCFG1   (0x10f800ff | (1<<11))
 #if CONFIG_LEON_RAM_SELECT == CONFIG_LEON_RAM_SDRAM_NOSRAM
-#define CFG_GRLIB_MEMCFG2   0x82206000
+#define CONFIG_SYS_GRLIB_MEMCFG2   0x82206000
 #else
-#define CFG_GRLIB_MEMCFG2   0x82205260
+#define CONFIG_SYS_GRLIB_MEMCFG2   0x82205260
 #endif
-#define CFG_GRLIB_MEMCFG3   0x0809a000
+#define CONFIG_SYS_GRLIB_MEMCFG3   0x0809a000
 
-#define CFG_GRLIB_FT_MEMCFG1   (0x10f800ff | (1<<11))
+#define CONFIG_SYS_GRLIB_FT_MEMCFG1   (0x10f800ff | (1<<11))
 #if CONFIG_LEON_RAM_SELECT == CONFIG_LEON_RAM_SDRAM_NOSRAM
-#define CFG_GRLIB_FT_MEMCFG2   0x82206000
+#define CONFIG_SYS_GRLIB_FT_MEMCFG2   0x82206000
 #else
-#define CFG_GRLIB_FT_MEMCFG2   0x82205260
+#define CONFIG_SYS_GRLIB_FT_MEMCFG2   0x82205260
 #endif
-#define CFG_GRLIB_FT_MEMCFG3   0x0809a000
+#define CONFIG_SYS_GRLIB_FT_MEMCFG3   0x0809a000
 
 /* no DDR controller */
-#define CFG_GRLIB_DDR_CFG   0x00000000
+#define CONFIG_SYS_GRLIB_DDR_CFG   0x00000000
 
 /* no DDR2 Controller */
-#define CFG_GRLIB_DDR2_CFG1 0x00000000
-#define CFG_GRLIB_DDR2_CFG3 0x00000000
+#define CONFIG_SYS_GRLIB_DDR2_CFG1 0x00000000
+#define CONFIG_SYS_GRLIB_DDR2_CFG3 0x00000000
 
 /* Calculate scaler register value from default baudrate */
-#define CFG_GRLIB_APBUART_SCALER \
+#define CONFIG_SYS_GRLIB_APBUART_SCALER \
  ((((CONFIG_SYS_CLK_FREQ*10)/(CONFIG_BAUDRATE*8))-5)/10)
 
 /* Identification string */
diff --git a/include/configs/gr_ep2s60.h b/include/configs/gr_ep2s60.h
index ae25fb291..6f58bac91 100644
--- a/include/configs/gr_ep2s60.h
+++ b/include/configs/gr_ep2s60.h
@@ -45,7 +45,7 @@
 #define CONFIG_SYS_CLK_FREQ	96000000	/* 96MHz */
 
 /* Number of SPARC register windows */
-#define CFG_SPARC_NWINDOWS 8
+#define CONFIG_SYS_SPARC_NWINDOWS 8
 
 /* Define this is the GR-2S60-MEZZ mezzanine is available and you
  * want to use the USB and GRETH functionality of the board
@@ -61,7 +61,7 @@
  * Serial console configuration
  */
 #define CONFIG_BAUDRATE		38400	/* ... at 38400 bps */
-#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
 
 /* Partitions */
 #define CONFIG_DOS_PARTITION
@@ -87,7 +87,7 @@
 #define CONFIG_CMD_USB
 #define CONFIG_USB_STORAGE
 /* Enable needed helper functions */
-#define CFG_DEVICE_DEREGISTER	/* needs device_deregister */
+#define CONFIG_SYS_DEVICE_DEREGISTER	/* needs device_deregister */
 #endif
 
 /*
@@ -180,82 +180,82 @@
  *               0xFF000000 for 16 MB
  *               0xFF800000 for  8 MB
  */
-/*#define CFG_NO_FLASH		1*/
-#define CFG_FLASH_BASE		0x00000000
-#define CFG_FLASH_SIZE		0x00400000	/* FPGA Bit file is in top of FLASH, we only ues the bottom 4Mb */
+/*#define CONFIG_SYS_NO_FLASH		1*/
+#define CONFIG_SYS_FLASH_BASE		0x00000000
+#define CONFIG_SYS_FLASH_SIZE		0x00400000	/* FPGA Bit file is in top of FLASH, we only ues the bottom 4Mb */
 
 #define PHYS_FLASH_SECT_SIZE	0x00010000	/* 64 KB sectors */
-#define CFG_MAX_FLASH_SECT	256	/* max num of sects on one chip */
-#define CFG_MAX_FLASH_BANKS	1	/* max num of memory banks      */
+#define CONFIG_SYS_MAX_FLASH_SECT	256	/* max num of sects on one chip */
+#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max num of memory banks      */
 
-#define CFG_FLASH_ERASE_TOUT	240000	/* Flash Erase Timeout (in ms)  */
-#define CFG_FLASH_WRITE_TOUT	500	/* Flash Write Timeout (in ms)  */
-#define CFG_FLASH_LOCK_TOUT	5	/* Timeout for Flash Set Lock Bit (in ms) */
-#define CFG_FLASH_UNLOCK_TOUT	10000	/* Timeout for Flash Clear Lock Bits (in ms) */
-#define CFG_FLASH_PROTECTION	/* "Real" (hardware) sectors protection */
+#define CONFIG_SYS_FLASH_ERASE_TOUT	240000	/* Flash Erase Timeout (in ms)  */
+#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Flash Write Timeout (in ms)  */
+#define CONFIG_SYS_FLASH_LOCK_TOUT	5	/* Timeout for Flash Set Lock Bit (in ms) */
+#define CONFIG_SYS_FLASH_UNLOCK_TOUT	10000	/* Timeout for Flash Clear Lock Bits (in ms) */
+#define CONFIG_SYS_FLASH_PROTECTION	/* "Real" (hardware) sectors protection */
 
 /*** CFI CONFIG ***/
-#define CFG_FLASH_CFI_WIDTH	FLASH_CFI_8BIT
+#define CONFIG_SYS_FLASH_CFI_WIDTH	FLASH_CFI_8BIT
 #define CONFIG_FLASH_CFI_DRIVER
-#define CFG_FLASH_CFI
+#define CONFIG_SYS_FLASH_CFI
 /* Bypass cache when reading regs from flash memory */
-#define CFG_FLASH_CFI_BYPASS_READ
+#define CONFIG_SYS_FLASH_CFI_BYPASS_READ
 /* Buffered writes (32byte/go) instead of single accesses */
-#define CFG_FLASH_USE_BUFFER_WRITE
+#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
 
 /*
  * Environment settings
  */
-/*#define CFG_ENV_IS_NOWHERE 1*/
-#define CFG_ENV_IS_IN_FLASH	1
-/* CFG_ENV_ADDR need to be at sector boundary */
-#define CFG_ENV_SIZE		0x8000
-#define CFG_ENV_SECT_SIZE	0x20000
-#define CFG_ENV_ADDR		(CFG_FLASH_BASE+CFG_FLASH_SIZE-CFG_ENV_SECT_SIZE)
+/*#define CONFIG_ENV_IS_NOWHERE 1*/
+#define CONFIG_ENV_IS_IN_FLASH	1
+/* CONFIG_ENV_ADDR need to be at sector boundary */
+#define CONFIG_ENV_SIZE		0x8000
+#define CONFIG_ENV_SECT_SIZE	0x20000
+#define CONFIG_ENV_ADDR		(CONFIG_SYS_FLASH_BASE+CONFIG_SYS_FLASH_SIZE-CONFIG_ENV_SECT_SIZE)
 #define CONFIG_ENV_OVERWRITE	1
 
 /*
  * Memory map
  */
-#define CFG_SDRAM_BASE		0x40000000
-#define CFG_SDRAM_SIZE		0x02000000
-#define CFG_SDRAM_END		(CFG_SDRAM_BASE+CFG_SDRAM_SIZE)
+#define CONFIG_SYS_SDRAM_BASE		0x40000000
+#define CONFIG_SYS_SDRAM_SIZE		0x02000000
+#define CONFIG_SYS_SDRAM_END		(CONFIG_SYS_SDRAM_BASE+CONFIG_SYS_SDRAM_SIZE)
 
 /* no SRAM available */
-#undef CFG_SRAM_BASE
-#undef CFG_SRAM_SIZE
+#undef CONFIG_SYS_SRAM_BASE
+#undef CONFIG_SYS_SRAM_SIZE
 
-#define CFG_RAM_BASE CFG_SDRAM_BASE
-#define CFG_RAM_SIZE CFG_SDRAM_SIZE
-#define CFG_RAM_END CFG_SDRAM_END
+#define CONFIG_SYS_RAM_BASE CONFIG_SYS_SDRAM_BASE
+#define CONFIG_SYS_RAM_SIZE CONFIG_SYS_SDRAM_SIZE
+#define CONFIG_SYS_RAM_END CONFIG_SYS_SDRAM_END
 
-#define CFG_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
-#define CFG_GBL_DATA_OFFSET	(CFG_SDRAM_END - CFG_GBL_DATA_SIZE)
+#define CONFIG_SYS_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_SDRAM_END - CONFIG_SYS_GBL_DATA_SIZE)
 
-#define CFG_PROM_SIZE		(8192-CFG_GBL_DATA_SIZE)
-#define CFG_PROM_OFFSET		(CFG_GBL_DATA_OFFSET-CFG_PROM_SIZE)
+#define CONFIG_SYS_PROM_SIZE		(8192-CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_PROM_OFFSET		(CONFIG_SYS_GBL_DATA_OFFSET-CONFIG_SYS_PROM_SIZE)
 
-#define CFG_INIT_SP_OFFSET	(CFG_PROM_OFFSET-32)
-#define CFG_STACK_SIZE		(0x10000-32)
+#define CONFIG_SYS_INIT_SP_OFFSET	(CONFIG_SYS_PROM_OFFSET-32)
+#define CONFIG_SYS_STACK_SIZE		(0x10000-32)
 
-#define CFG_MONITOR_BASE    TEXT_BASE
-#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
-#   define CFG_RAMBOOT		1
+#define CONFIG_SYS_MONITOR_BASE    TEXT_BASE
+#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
+#   define CONFIG_SYS_RAMBOOT		1
 #endif
 
-#define CFG_MONITOR_LEN		(512 << 10)	/* Reserve 512 kB for Monitor   */
-#define CFG_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()  */
-#define CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
+#define CONFIG_SYS_MONITOR_LEN		(512 << 10)	/* Reserve 512 kB for Monitor   */
+#define CONFIG_SYS_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()  */
+#define CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
 
-#define CFG_MALLOC_END		(CFG_INIT_SP_OFFSET-CFG_STACK_SIZE)
-#define CFG_MALLOC_BASE		(CFG_MALLOC_END-CFG_MALLOC_LEN)
+#define CONFIG_SYS_MALLOC_END		(CONFIG_SYS_INIT_SP_OFFSET-CONFIG_SYS_STACK_SIZE)
+#define CONFIG_SYS_MALLOC_BASE		(CONFIG_SYS_MALLOC_END-CONFIG_SYS_MALLOC_LEN)
 
 /* relocated monitor area */
-#define CFG_RELOC_MONITOR_MAX_END   CFG_MALLOC_BASE
-#define CFG_RELOC_MONITOR_BASE     (CFG_RELOC_MONITOR_MAX_END-CFG_MONITOR_LEN)
+#define CONFIG_SYS_RELOC_MONITOR_MAX_END   CONFIG_SYS_MALLOC_BASE
+#define CONFIG_SYS_RELOC_MONITOR_BASE     (CONFIG_SYS_RELOC_MONITOR_MAX_END-CONFIG_SYS_MONITOR_LEN)
 
 /* make un relocated address from relocated address */
-#define UN_RELOC(address) (address-(CFG_RELOC_MONITOR_BASE-TEXT_BASE))
+#define UN_RELOC(address) (address-(CONFIG_SYS_RELOC_MONITOR_BASE-TEXT_BASE))
 
 /*
  * Ethernet configuration uses on board SMC91C111, however if a mezzanine
@@ -295,23 +295,23 @@
 /*
  * Miscellaneous configurable options
  */
-#define CFG_LONGHELP		/* undef to save memory     */
-#define CFG_PROMPT		"=> "	/* Monitor Command Prompt   */
+#define CONFIG_SYS_LONGHELP		/* undef to save memory     */
+#define CONFIG_SYS_PROMPT		"=> "	/* Monitor Command Prompt   */
 #if defined(CONFIG_CMD_KGDB)
-#define CFG_CBSIZE		1024	/* Console I/O Buffer Size  */
+#define CONFIG_SYS_CBSIZE		1024	/* Console I/O Buffer Size  */
 #else
-#define CFG_CBSIZE		256	/* Console I/O Buffer Size  */
+#define CONFIG_SYS_CBSIZE		256	/* Console I/O Buffer Size  */
 #endif
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16)	/* Print Buffer Size */
-#define CFG_MAXARGS		16	/* max number of command args   */
-#define CFG_BARGSIZE		CFG_CBSIZE	/* Boot Argument Buffer Size    */
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)	/* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS		16	/* max number of command args   */
+#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size    */
 
-#define CFG_MEMTEST_START	0x00100000	/* memtest works on */
-#define CFG_MEMTEST_END		0x00f00000	/* 1 ... 15 MB in DRAM  */
+#define CONFIG_SYS_MEMTEST_START	0x00100000	/* memtest works on */
+#define CONFIG_SYS_MEMTEST_END		0x00f00000	/* 1 ... 15 MB in DRAM  */
 
-#define CFG_LOAD_ADDR		0x100000	/* default load address */
+#define CONFIG_SYS_LOAD_ADDR		0x100000	/* default load address */
 
-#define CFG_HZ			1000	/* decrementer freq: 1 ms ticks */
+#define CONFIG_SYS_HZ			1000	/* decrementer freq: 1 ms ticks */
 
 /*-----------------------------------------------------------------------
  * USB stuff
@@ -323,28 +323,28 @@
 /***** Gaisler GRLIB IP-Cores Config ********/
 
 /* AMBA Plug & Play info display on startup */
-/*#define CFG_AMBAPP_PRINT_ON_STARTUP*/
+/*#define CONFIG_SYS_AMBAPP_PRINT_ON_STARTUP*/
 
-#define CFG_GRLIB_SDRAM    0
+#define CONFIG_SYS_GRLIB_SDRAM    0
 
 /* See, GRLIB Docs (grip.pdf) on how to set up
  * These the memory controller registers.
  */
-#define CFG_GRLIB_MEMCFG1  (0x10f800ff | (1<<11))
-#define CFG_GRLIB_MEMCFG2  0x00000000
-#define CFG_GRLIB_MEMCFG3  0x00000000
+#define CONFIG_SYS_GRLIB_MEMCFG1  (0x10f800ff | (1<<11))
+#define CONFIG_SYS_GRLIB_MEMCFG2  0x00000000
+#define CONFIG_SYS_GRLIB_MEMCFG3  0x00000000
 
-#define CFG_GRLIB_FT_MEMCFG1  (0x10f800ff | (1<<11))
-#define CFG_GRLIB_FT_MEMCFG2  0x00000000
-#define CFG_GRLIB_FT_MEMCFG3  0x00000000
+#define CONFIG_SYS_GRLIB_FT_MEMCFG1  (0x10f800ff | (1<<11))
+#define CONFIG_SYS_GRLIB_FT_MEMCFG2  0x00000000
+#define CONFIG_SYS_GRLIB_FT_MEMCFG3  0x00000000
 
-#define CFG_GRLIB_DDR_CFG  0xa900830a
+#define CONFIG_SYS_GRLIB_DDR_CFG  0xa900830a
 
-#define CFG_GRLIB_DDR2_CFG1 0x00000000
-#define CFG_GRLIB_DDR2_CFG3 0x00000000
+#define CONFIG_SYS_GRLIB_DDR2_CFG1 0x00000000
+#define CONFIG_SYS_GRLIB_DDR2_CFG3 0x00000000
 
 /* Calculate scaler register value from default baudrate */
-#define CFG_GRLIB_APBUART_SCALER \
+#define CONFIG_SYS_GRLIB_APBUART_SCALER \
  ((((CONFIG_SYS_CLK_FREQ*10)/(CONFIG_BAUDRATE*8))-5)/10)
 
 /* Identification string */
diff --git a/include/configs/gr_xc3s_1500.h b/include/configs/gr_xc3s_1500.h
index f019bb44e..4dd9a0f3c 100644
--- a/include/configs/gr_xc3s_1500.h
+++ b/include/configs/gr_xc3s_1500.h
@@ -42,13 +42,13 @@
 #define CONFIG_SYS_CLK_FREQ	40000000	/* 40MHz */
 
 /* Number of SPARC register windows */
-#define CFG_SPARC_NWINDOWS 8
+#define CONFIG_SYS_SPARC_NWINDOWS 8
 
 /*
  * Serial console configuration
  */
 #define CONFIG_BAUDRATE		38400	/* ... at 38400 bps */
-#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
 
 /* Partitions */
 #define CONFIG_DOS_PARTITION
@@ -156,83 +156,83 @@
  *               0xFF000000 for 16 MB
  *               0xFF800000 for  8 MB
  */
-/*#define CFG_NO_FLASH		1*/
-#define CFG_FLASH_BASE		0x00000000
-#define CFG_FLASH_SIZE		0x00800000
+/*#define CONFIG_SYS_NO_FLASH		1*/
+#define CONFIG_SYS_FLASH_BASE		0x00000000
+#define CONFIG_SYS_FLASH_SIZE		0x00800000
 
 #define PHYS_FLASH_SECT_SIZE	0x00020000	/* 128 KB sectors */
-#define CFG_MAX_FLASH_SECT	64	/* max num of sects on one chip */
-#define CFG_MAX_FLASH_BANKS	1	/* max num of memory banks      */
+#define CONFIG_SYS_MAX_FLASH_SECT	64	/* max num of sects on one chip */
+#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max num of memory banks      */
 
-#define CFG_FLASH_ERASE_TOUT	240000	/* Flash Erase Timeout (in ms)  */
-#define CFG_FLASH_WRITE_TOUT	500	/* Flash Write Timeout (in ms)  */
-#define CFG_FLASH_LOCK_TOUT	5	/* Timeout for Flash Set Lock Bit (in ms) */
-#define CFG_FLASH_UNLOCK_TOUT	10000	/* Timeout for Flash Clear Lock Bits (in ms) */
-#define CFG_FLASH_PROTECTION	/* "Real" (hardware) sectors protection */
+#define CONFIG_SYS_FLASH_ERASE_TOUT	240000	/* Flash Erase Timeout (in ms)  */
+#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Flash Write Timeout (in ms)  */
+#define CONFIG_SYS_FLASH_LOCK_TOUT	5	/* Timeout for Flash Set Lock Bit (in ms) */
+#define CONFIG_SYS_FLASH_UNLOCK_TOUT	10000	/* Timeout for Flash Clear Lock Bits (in ms) */
+#define CONFIG_SYS_FLASH_PROTECTION	/* "Real" (hardware) sectors protection */
 
 /*** CFI CONFIG ***/
-#define CFG_FLASH_CFI_WIDTH	FLASH_CFI_8BIT
+#define CONFIG_SYS_FLASH_CFI_WIDTH	FLASH_CFI_8BIT
 #define CONFIG_FLASH_CFI_DRIVER
-#define CFG_FLASH_CFI
+#define CONFIG_SYS_FLASH_CFI
 /* Bypass cache when reading regs from flash memory */
-#define CFG_FLASH_CFI_BYPASS_READ
+#define CONFIG_SYS_FLASH_CFI_BYPASS_READ
 /* Buffered writes (32byte/go) instead of single accesses */
-#define CFG_FLASH_USE_BUFFER_WRITE
+#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
 
 /*
  * Environment settings
  */
-/*#define CFG_ENV_IS_NOWHERE 1*/
-#define CFG_ENV_IS_IN_FLASH	1
-/* CFG_ENV_ADDR need to be at sector boundary */
-#define CFG_ENV_SIZE		0x8000
-#define CFG_ENV_SECT_SIZE	0x20000
-#define CFG_ENV_ADDR		(CFG_FLASH_BASE+CFG_FLASH_SIZE-CFG_ENV_SECT_SIZE)
+/*#define CONFIG_ENV_IS_NOWHERE 1*/
+#define CONFIG_ENV_IS_IN_FLASH	1
+/* CONFIG_ENV_ADDR need to be at sector boundary */
+#define CONFIG_ENV_SIZE		0x8000
+#define CONFIG_ENV_SECT_SIZE	0x20000
+#define CONFIG_ENV_ADDR		(CONFIG_SYS_FLASH_BASE+CONFIG_SYS_FLASH_SIZE-CONFIG_ENV_SECT_SIZE)
 #define CONFIG_ENV_OVERWRITE	1
 
 /*
  * Memory map
  */
-#define CFG_SDRAM_BASE		0x40000000
-#define CFG_SDRAM_SIZE		0x4000000
-#define CFG_SDRAM_END		(CFG_SDRAM_BASE+CFG_SDRAM_SIZE)
+#define CONFIG_SYS_SDRAM_BASE		0x40000000
+#define CONFIG_SYS_SDRAM_SIZE		0x4000000
+#define CONFIG_SYS_SDRAM_END		(CONFIG_SYS_SDRAM_BASE+CONFIG_SYS_SDRAM_SIZE)
 
 /* no SRAM available */
-#undef CFG_SRAM_BASE
-#undef CFG_SRAM_SIZE
+#undef CONFIG_SYS_SRAM_BASE
+#undef CONFIG_SYS_SRAM_SIZE
 
 /* Always Run U-Boot from SDRAM */
-#define CFG_RAM_BASE CFG_SDRAM_BASE
-#define CFG_RAM_SIZE CFG_SDRAM_SIZE
-#define CFG_RAM_END CFG_SDRAM_END
+#define CONFIG_SYS_RAM_BASE CONFIG_SYS_SDRAM_BASE
+#define CONFIG_SYS_RAM_SIZE CONFIG_SYS_SDRAM_SIZE
+#define CONFIG_SYS_RAM_END CONFIG_SYS_SDRAM_END
 
-#define CFG_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
-#define CFG_GBL_DATA_OFFSET	(CFG_RAM_END - CFG_GBL_DATA_SIZE)
+#define CONFIG_SYS_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
 
-#define CFG_PROM_SIZE		(8192-CFG_GBL_DATA_SIZE)
-#define CFG_PROM_OFFSET		(CFG_GBL_DATA_OFFSET-CFG_PROM_SIZE)
+#define CONFIG_SYS_PROM_SIZE		(8192-CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_PROM_OFFSET		(CONFIG_SYS_GBL_DATA_OFFSET-CONFIG_SYS_PROM_SIZE)
 
-#define CFG_INIT_SP_OFFSET	(CFG_PROM_OFFSET-32)
-#define CFG_STACK_SIZE		(0x10000-32)
+#define CONFIG_SYS_INIT_SP_OFFSET	(CONFIG_SYS_PROM_OFFSET-32)
+#define CONFIG_SYS_STACK_SIZE		(0x10000-32)
 
-#define CFG_MONITOR_BASE    TEXT_BASE
-#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
-#   define CFG_RAMBOOT		1
+#define CONFIG_SYS_MONITOR_BASE    TEXT_BASE
+#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
+#   define CONFIG_SYS_RAMBOOT		1
 #endif
 
-#define CFG_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor   */
-#define CFG_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()  */
-#define CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
+#define CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor   */
+#define CONFIG_SYS_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()  */
+#define CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
 
-#define CFG_MALLOC_END		(CFG_INIT_SP_OFFSET-CFG_STACK_SIZE)
-#define CFG_MALLOC_BASE		(CFG_MALLOC_END-CFG_MALLOC_LEN)
+#define CONFIG_SYS_MALLOC_END		(CONFIG_SYS_INIT_SP_OFFSET-CONFIG_SYS_STACK_SIZE)
+#define CONFIG_SYS_MALLOC_BASE		(CONFIG_SYS_MALLOC_END-CONFIG_SYS_MALLOC_LEN)
 
 /* relocated monitor area */
-#define CFG_RELOC_MONITOR_MAX_END   CFG_MALLOC_BASE
-#define CFG_RELOC_MONITOR_BASE     (CFG_RELOC_MONITOR_MAX_END-CFG_MONITOR_LEN)
+#define CONFIG_SYS_RELOC_MONITOR_MAX_END   CONFIG_SYS_MALLOC_BASE
+#define CONFIG_SYS_RELOC_MONITOR_BASE     (CONFIG_SYS_RELOC_MONITOR_MAX_END-CONFIG_SYS_MONITOR_LEN)
 
 /* make un relocated address from relocated address */
-#define UN_RELOC(address) (address-(CFG_RELOC_MONITOR_BASE-TEXT_BASE))
+#define UN_RELOC(address) (address-(CONFIG_SYS_RELOC_MONITOR_BASE-TEXT_BASE))
 
 /*
  * Ethernet configuration
@@ -254,23 +254,23 @@
 /*
  * Miscellaneous configurable options
  */
-#define CFG_LONGHELP		/* undef to save memory     */
-#define CFG_PROMPT		"=> "	/* Monitor Command Prompt   */
+#define CONFIG_SYS_LONGHELP		/* undef to save memory     */
+#define CONFIG_SYS_PROMPT		"=> "	/* Monitor Command Prompt   */
 #if defined(CONFIG_CMD_KGDB)
-#define CFG_CBSIZE		1024	/* Console I/O Buffer Size  */
+#define CONFIG_SYS_CBSIZE		1024	/* Console I/O Buffer Size  */
 #else
-#define CFG_CBSIZE		256	/* Console I/O Buffer Size  */
+#define CONFIG_SYS_CBSIZE		256	/* Console I/O Buffer Size  */
 #endif
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16)	/* Print Buffer Size */
-#define CFG_MAXARGS		16	/* max number of command args   */
-#define CFG_BARGSIZE		CFG_CBSIZE	/* Boot Argument Buffer Size    */
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)	/* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS		16	/* max number of command args   */
+#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size    */
 
-#define CFG_MEMTEST_START	0x00100000	/* memtest works on */
-#define CFG_MEMTEST_END		0x00f00000	/* 1 ... 15 MB in DRAM  */
+#define CONFIG_SYS_MEMTEST_START	0x00100000	/* memtest works on */
+#define CONFIG_SYS_MEMTEST_END		0x00f00000	/* 1 ... 15 MB in DRAM  */
 
-#define CFG_LOAD_ADDR		0x100000	/* default load address */
+#define CONFIG_SYS_LOAD_ADDR		0x100000	/* default load address */
 
-#define CFG_HZ			1000	/* decrementer freq: 1 ms ticks */
+#define CONFIG_SYS_HZ			1000	/* decrementer freq: 1 ms ticks */
 
 /*
  * Various low-level settings
@@ -286,30 +286,30 @@
 /***** Gaisler GRLIB IP-Cores Config ********/
 
 /* AMBA Plug & Play info display on startup */
-/*#define CFG_AMBAPP_PRINT_ON_STARTUP*/
+/*#define CONFIG_SYS_AMBAPP_PRINT_ON_STARTUP*/
 
-#define CFG_GRLIB_SDRAM    0
+#define CONFIG_SYS_GRLIB_SDRAM    0
 
 /* See, GRLIB Docs (grip.pdf) on how to set up
  * These the memory controller registers.
  */
-#define CFG_GRLIB_MEMCFG1   (0x000000ff | (1<<11))
-#define CFG_GRLIB_MEMCFG2   0x82206000
-#define CFG_GRLIB_MEMCFG3   0x00136000
+#define CONFIG_SYS_GRLIB_MEMCFG1   (0x000000ff | (1<<11))
+#define CONFIG_SYS_GRLIB_MEMCFG2   0x82206000
+#define CONFIG_SYS_GRLIB_MEMCFG3   0x00136000
 
-#define CFG_GRLIB_FT_MEMCFG1   (0x000000ff | (1<<11))
-#define CFG_GRLIB_FT_MEMCFG2   0x82206000
-#define CFG_GRLIB_FT_MEMCFG3   0x00136000
+#define CONFIG_SYS_GRLIB_FT_MEMCFG1   (0x000000ff | (1<<11))
+#define CONFIG_SYS_GRLIB_FT_MEMCFG2   0x82206000
+#define CONFIG_SYS_GRLIB_FT_MEMCFG3   0x00136000
 
 /* no DDR controller */
-#define CFG_GRLIB_DDR_CFG   0x00000000
+#define CONFIG_SYS_GRLIB_DDR_CFG   0x00000000
 
 /* no DDR2 Controller */
-#define CFG_GRLIB_DDR2_CFG1 0x00000000
-#define CFG_GRLIB_DDR2_CFG3 0x00000000
+#define CONFIG_SYS_GRLIB_DDR2_CFG1 0x00000000
+#define CONFIG_SYS_GRLIB_DDR2_CFG3 0x00000000
 
 /* Calculate scaler register value from default baudrate */
-#define CFG_GRLIB_APBUART_SCALER \
+#define CONFIG_SYS_GRLIB_APBUART_SCALER \
  ((((CONFIG_SYS_CLK_FREQ*10)/(CONFIG_BAUDRATE*8))-5)/10)
 
 /* Identification string */
diff --git a/include/configs/grsim.h b/include/configs/grsim.h
index f880a7b51..a9eaa4a2c 100644
--- a/include/configs/grsim.h
+++ b/include/configs/grsim.h
@@ -49,13 +49,13 @@
 #define CONFIG_SYS_CLK_FREQ	40000000	/* 40MHz */
 
 /* Number of SPARC register windows */
-#define CFG_SPARC_NWINDOWS 8
+#define CONFIG_SYS_SPARC_NWINDOWS 8
 
 /*
  * Serial console configuration
  */
 #define CONFIG_BAUDRATE		38400	/* ... at 38400 bps */
-#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
 
 /* Partitions */
 #define CONFIG_DOS_PARTITION
@@ -93,9 +93,9 @@
 	"echo"
 
 #undef	CONFIG_BOOTARGS
-/*#define CFG_HUSH_PARSER 0*/
-#ifdef	CFG_HUSH_PARSER
-#define	CFG_PROMPT_HUSH_PS2	"> "
+/*#define CONFIG_SYS_HUSH_PARSER 0*/
+#ifdef	CONFIG_SYS_HUSH_PARSER
+#define	CONFIG_SYS_PROMPT_HUSH_PS2	"> "
 #endif
 
 #define	CONFIG_EXTRA_ENV_SETTINGS					\
@@ -178,86 +178,86 @@
  *               0xFF000000 for 16 MB
  *               0xFF800000 for  8 MB
  */
-#define CFG_NO_FLASH		1
-#define CFG_FLASH_BASE		0x00000000
-#define CFG_FLASH_SIZE		0x00800000
-#define CFG_ENV_SIZE		0x8000
+#define CONFIG_SYS_NO_FLASH		1
+#define CONFIG_SYS_FLASH_BASE		0x00000000
+#define CONFIG_SYS_FLASH_SIZE		0x00800000
+#define CONFIG_ENV_SIZE		0x8000
 
-#define CFG_ENV_ADDR		(CFG_FLASH_BASE+CFG_FLASH_SIZE-CFG_ENV_SIZE)
+#define CONFIG_ENV_ADDR		(CONFIG_SYS_FLASH_BASE+CONFIG_SYS_FLASH_SIZE-CONFIG_ENV_SIZE)
 
 #define PHYS_FLASH_SECT_SIZE	0x00020000	/* 128 KB sectors */
-#define CFG_MAX_FLASH_SECT	64	/* max num of sects on one chip */
-#define CFG_MAX_FLASH_BANKS	1	/* max num of memory banks      */
+#define CONFIG_SYS_MAX_FLASH_SECT	64	/* max num of sects on one chip */
+#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max num of memory banks      */
 
-#define CFG_FLASH_ERASE_TOUT	240000	/* Flash Erase Timeout (in ms)  */
-#define CFG_FLASH_WRITE_TOUT	500	/* Flash Write Timeout (in ms)  */
-#define CFG_FLASH_LOCK_TOUT	5	/* Timeout for Flash Set Lock Bit (in ms) */
-#define CFG_FLASH_UNLOCK_TOUT	10000	/* Timeout for Flash Clear Lock Bits (in ms) */
+#define CONFIG_SYS_FLASH_ERASE_TOUT	240000	/* Flash Erase Timeout (in ms)  */
+#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Flash Write Timeout (in ms)  */
+#define CONFIG_SYS_FLASH_LOCK_TOUT	5	/* Timeout for Flash Set Lock Bit (in ms) */
+#define CONFIG_SYS_FLASH_UNLOCK_TOUT	10000	/* Timeout for Flash Clear Lock Bits (in ms) */
 
 #ifdef ENABLE_FLASH_SUPPORT
 /* For use with grsim FLASH emulation extension */
-#define CFG_FLASH_PROTECTION	/* "Real" (hardware) sectors protection */
+#define CONFIG_SYS_FLASH_PROTECTION	/* "Real" (hardware) sectors protection */
 
 #undef CONFIG_FLASH_8BIT	/* Flash is 32-bit */
 
 /*** CFI CONFIG ***/
-#define CFG_FLASH_CFI_WIDTH	FLASH_CFI_8BIT
+#define CONFIG_SYS_FLASH_CFI_WIDTH	FLASH_CFI_8BIT
 #define CONFIG_FLASH_CFI_DRIVER
-#define CFG_FLASH_CFI
+#define CONFIG_SYS_FLASH_CFI
 #endif
 
 /*
  * Environment settings
  */
-#define CFG_ENV_IS_NOWHERE 1
-/*#define CFG_ENV_IS_IN_FLASH	0*/
-/*#define CFG_ENV_SIZE		0x8000*/
-#define CFG_ENV_SECT_SIZE	0x40000
+#define CONFIG_ENV_IS_NOWHERE 1
+/*#define CONFIG_ENV_IS_IN_FLASH*/
+/*#define CONFIG_ENV_SIZE		0x8000*/
+#define CONFIG_ENV_SECT_SIZE	0x40000
 #define CONFIG_ENV_OVERWRITE	1
 
 /*
  * Memory map
  */
-#define CFG_SDRAM_BASE		0x40000000
-#define CFG_SDRAM_SIZE		0x02000000
-#define CFG_SDRAM_END		(CFG_SDRAM_BASE+CFG_SDRAM_SIZE)
+#define CONFIG_SYS_SDRAM_BASE		0x40000000
+#define CONFIG_SYS_SDRAM_SIZE		0x02000000
+#define CONFIG_SYS_SDRAM_END		(CONFIG_SYS_SDRAM_BASE+CONFIG_SYS_SDRAM_SIZE)
 
 /* no SRAM available */
-#undef CFG_SRAM_BASE
-#undef CFG_SRAM_SIZE
+#undef CONFIG_SYS_SRAM_BASE
+#undef CONFIG_SYS_SRAM_SIZE
 
 /* Always Run U-Boot from SDRAM */
-#define CFG_RAM_BASE CFG_SDRAM_BASE
-#define CFG_RAM_SIZE CFG_SDRAM_SIZE
-#define CFG_RAM_END CFG_SDRAM_END
+#define CONFIG_SYS_RAM_BASE CONFIG_SYS_SDRAM_BASE
+#define CONFIG_SYS_RAM_SIZE CONFIG_SYS_SDRAM_SIZE
+#define CONFIG_SYS_RAM_END CONFIG_SYS_SDRAM_END
 
-#define CFG_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
-#define CFG_GBL_DATA_OFFSET	(CFG_RAM_END - CFG_GBL_DATA_SIZE)
+#define CONFIG_SYS_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
 
-#define CFG_PROM_SIZE		(8192-CFG_GBL_DATA_SIZE)
-#define CFG_PROM_OFFSET		(CFG_GBL_DATA_OFFSET-CFG_PROM_SIZE)
+#define CONFIG_SYS_PROM_SIZE		(8192-CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_PROM_OFFSET		(CONFIG_SYS_GBL_DATA_OFFSET-CONFIG_SYS_PROM_SIZE)
 
-#define CFG_INIT_SP_OFFSET	(CFG_PROM_OFFSET-32)
-#define CFG_STACK_SIZE		(0x10000-32)
+#define CONFIG_SYS_INIT_SP_OFFSET	(CONFIG_SYS_PROM_OFFSET-32)
+#define CONFIG_SYS_STACK_SIZE		(0x10000-32)
 
-#define CFG_MONITOR_BASE    TEXT_BASE
-#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
-#   define CFG_RAMBOOT		1
+#define CONFIG_SYS_MONITOR_BASE    TEXT_BASE
+#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
+#   define CONFIG_SYS_RAMBOOT		1
 #endif
 
-#define CFG_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor   */
-#define CFG_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()  */
-#define CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
+#define CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor   */
+#define CONFIG_SYS_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()  */
+#define CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
 
-#define CFG_MALLOC_END		(CFG_INIT_SP_OFFSET-CFG_STACK_SIZE)
-#define CFG_MALLOC_BASE		(CFG_MALLOC_END-CFG_MALLOC_LEN)
+#define CONFIG_SYS_MALLOC_END		(CONFIG_SYS_INIT_SP_OFFSET-CONFIG_SYS_STACK_SIZE)
+#define CONFIG_SYS_MALLOC_BASE		(CONFIG_SYS_MALLOC_END-CONFIG_SYS_MALLOC_LEN)
 
 /* relocated monitor area */
-#define CFG_RELOC_MONITOR_MAX_END   CFG_MALLOC_BASE
-#define CFG_RELOC_MONITOR_BASE     (CFG_RELOC_MONITOR_MAX_END-CFG_MONITOR_LEN)
+#define CONFIG_SYS_RELOC_MONITOR_MAX_END   CONFIG_SYS_MALLOC_BASE
+#define CONFIG_SYS_RELOC_MONITOR_BASE     (CONFIG_SYS_RELOC_MONITOR_MAX_END-CONFIG_SYS_MONITOR_LEN)
 
 /* make un relocated address from relocated address */
-#define UN_RELOC(address) (address-(CFG_RELOC_MONITOR_BASE-TEXT_BASE))
+#define UN_RELOC(address) (address-(CONFIG_SYS_RELOC_MONITOR_BASE-TEXT_BASE))
 
 /*
  * Ethernet configuration
@@ -284,52 +284,52 @@
 /*
  * Miscellaneous configurable options
  */
-#define CFG_LONGHELP		/* undef to save memory     */
-#define CFG_PROMPT		"=> "	/* Monitor Command Prompt   */
+#define CONFIG_SYS_LONGHELP		/* undef to save memory     */
+#define CONFIG_SYS_PROMPT		"=> "	/* Monitor Command Prompt   */
 #if defined(CONFIG_CMD_KGDB)
-#define CFG_CBSIZE		1024	/* Console I/O Buffer Size  */
+#define CONFIG_SYS_CBSIZE		1024	/* Console I/O Buffer Size  */
 #else
-#define CFG_CBSIZE		256	/* Console I/O Buffer Size  */
+#define CONFIG_SYS_CBSIZE		256	/* Console I/O Buffer Size  */
 #endif
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16)	/* Print Buffer Size */
-#define CFG_MAXARGS		16	/* max number of command args   */
-#define CFG_BARGSIZE		CFG_CBSIZE	/* Boot Argument Buffer Size    */
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)	/* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS		16	/* max number of command args   */
+#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size    */
 
-#define CFG_MEMTEST_START	0x00100000	/* memtest works on */
-#define CFG_MEMTEST_END		0x00f00000	/* 1 ... 15 MB in DRAM  */
+#define CONFIG_SYS_MEMTEST_START	0x00100000	/* memtest works on */
+#define CONFIG_SYS_MEMTEST_END		0x00f00000	/* 1 ... 15 MB in DRAM  */
 
-#define CFG_LOAD_ADDR		0x100000	/* default load address */
+#define CONFIG_SYS_LOAD_ADDR		0x100000	/* default load address */
 
-#define CFG_HZ			1000	/* decrementer freq: 1 ms ticks */
+#define CONFIG_SYS_HZ			1000	/* decrementer freq: 1 ms ticks */
 
 /***** Gaisler GRLIB IP-Cores Config ********/
 
 /* AMBA Plug & Play info display on startup */
-/*#define CFG_AMBAPP_PRINT_ON_STARTUP*/
+/*#define CONFIG_SYS_AMBAPP_PRINT_ON_STARTUP*/
 
-#define CFG_GRLIB_SDRAM     0
-#define CFG_GRLIB_MEMCFG1   (0x000000ff | (1<<11))
+#define CONFIG_SYS_GRLIB_SDRAM     0
+#define CONFIG_SYS_GRLIB_MEMCFG1   (0x000000ff | (1<<11))
 #if CONFIG_GRSIM
 /* GRSIM configuration */
-#define CFG_GRLIB_MEMCFG2   0x82206000
+#define CONFIG_SYS_GRLIB_MEMCFG2   0x82206000
 #else
 /* TSIM configuration */
-#define CFG_GRLIB_MEMCFG2   0x00001820
+#define CONFIG_SYS_GRLIB_MEMCFG2   0x00001820
 #endif
-#define CFG_GRLIB_MEMCFG3   0x00136000
+#define CONFIG_SYS_GRLIB_MEMCFG3   0x00136000
 
-#define CFG_GRLIB_FT_MEMCFG1   (0x000000ff | (1<<11))
-#define CFG_GRLIB_FT_MEMCFG2   0x82206000
-#define CFG_GRLIB_FT_MEMCFG3   0x00136000
+#define CONFIG_SYS_GRLIB_FT_MEMCFG1   (0x000000ff | (1<<11))
+#define CONFIG_SYS_GRLIB_FT_MEMCFG2   0x82206000
+#define CONFIG_SYS_GRLIB_FT_MEMCFG3   0x00136000
 
 /* no DDR controller */
-#define CFG_GRLIB_DDR_CFG   0x00000000
+#define CONFIG_SYS_GRLIB_DDR_CFG   0x00000000
 
 /* no DDR2 Controller */
-#define CFG_GRLIB_DDR2_CFG1 0x00000000
-#define CFG_GRLIB_DDR2_CFG3 0x00000000
+#define CONFIG_SYS_GRLIB_DDR2_CFG1 0x00000000
+#define CONFIG_SYS_GRLIB_DDR2_CFG3 0x00000000
 
-#define CFG_GRLIB_APBUART_SCALER \
+#define CONFIG_SYS_GRLIB_APBUART_SCALER \
  ((((CONFIG_SYS_CLK_FREQ*10)/(CONFIG_BAUDRATE*8))-5)/10)
 
 /* default kernel command line */
diff --git a/include/configs/grsim_leon2.h b/include/configs/grsim_leon2.h
index e5af9a6e9..58f26fd5a 100644
--- a/include/configs/grsim_leon2.h
+++ b/include/configs/grsim_leon2.h
@@ -48,13 +48,13 @@
 #define CONFIG_SYS_CLK_FREQ	40000000	/* 40MHz */
 
 /* Number of SPARC register windows */
-#define CFG_SPARC_NWINDOWS 8
+#define CONFIG_SYS_SPARC_NWINDOWS 8
 
 /*
  * Serial console configuration
  */
 #define CONFIG_BAUDRATE		38400	/* ... at 38400 bps */
-#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
 
 /* Partitions */
 #define CONFIG_DOS_PARTITION
@@ -90,9 +90,9 @@
 	"echo"
 
 #undef	CONFIG_BOOTARGS
-/*#define CFG_HUSH_PARSER 0*/
-#ifdef	CFG_HUSH_PARSER
-#define	CFG_PROMPT_HUSH_PS2	"> "
+/*#define CONFIG_SYS_HUSH_PARSER 0*/
+#ifdef	CONFIG_SYS_HUSH_PARSER
+#define	CONFIG_SYS_PROMPT_HUSH_PS2	"> "
 #endif
 
 #define	CONFIG_EXTRA_ENV_SETTINGS					\
@@ -175,87 +175,87 @@
  *               0xFF000000 for 16 MB
  *               0xFF800000 for  8 MB
  */
-#define CFG_NO_FLASH		1
-#define CFG_FLASH_BASE		0x00000000
-#define CFG_FLASH_SIZE		0x00800000
-#define CFG_ENV_SIZE		0x8000
+#define CONFIG_SYS_NO_FLASH		1
+#define CONFIG_SYS_FLASH_BASE		0x00000000
+#define CONFIG_SYS_FLASH_SIZE		0x00800000
+#define CONFIG_ENV_SIZE		0x8000
 
-#define CFG_ENV_ADDR		(CFG_FLASH_BASE+CFG_FLASH_SIZE-CFG_ENV_SIZE)
+#define CONFIG_ENV_ADDR		(CONFIG_SYS_FLASH_BASE+CONFIG_SYS_FLASH_SIZE-CONFIG_ENV_SIZE)
 
 #define PHYS_FLASH_SECT_SIZE	0x00020000	/* 128 KB sectors */
-#define CFG_MAX_FLASH_SECT	64	/* max num of sects on one chip */
-#define CFG_MAX_FLASH_BANKS	1	/* max num of memory banks      */
+#define CONFIG_SYS_MAX_FLASH_SECT	64	/* max num of sects on one chip */
+#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max num of memory banks      */
 
-#define CFG_FLASH_ERASE_TOUT	240000	/* Flash Erase Timeout (in ms)  */
-#define CFG_FLASH_WRITE_TOUT	500	/* Flash Write Timeout (in ms)  */
-#define CFG_FLASH_LOCK_TOUT	5	/* Timeout for Flash Set Lock Bit (in ms) */
-#define CFG_FLASH_UNLOCK_TOUT	10000	/* Timeout for Flash Clear Lock Bits (in ms) */
+#define CONFIG_SYS_FLASH_ERASE_TOUT	240000	/* Flash Erase Timeout (in ms)  */
+#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Flash Write Timeout (in ms)  */
+#define CONFIG_SYS_FLASH_LOCK_TOUT	5	/* Timeout for Flash Set Lock Bit (in ms) */
+#define CONFIG_SYS_FLASH_UNLOCK_TOUT	10000	/* Timeout for Flash Clear Lock Bits (in ms) */
 
 #ifdef ENABLE_FLASH_SUPPORT
 /* For use with grsim FLASH emulation extension */
-#define CFG_FLASH_PROTECTION	/* "Real" (hardware) sectors protection */
+#define CONFIG_SYS_FLASH_PROTECTION	/* "Real" (hardware) sectors protection */
 
 #undef CONFIG_FLASH_8BIT	/* Flash is 32-bit */
 
 /*** CFI CONFIG ***/
-#define CFG_FLASH_CFI_WIDTH	FLASH_CFI_8BIT
+#define CONFIG_SYS_FLASH_CFI_WIDTH	FLASH_CFI_8BIT
 #define CONFIG_FLASH_CFI_DRIVER
-#define CFG_FLASH_CFI
+#define CONFIG_SYS_FLASH_CFI
 #endif
 
 /*
  * Environment settings
  */
-#define CFG_ENV_IS_NOWHERE 1
-/*#define CFG_ENV_IS_IN_FLASH	0*/
-/*#define CFG_ENV_SIZE		0x8000*/
-#define CFG_ENV_SECT_SIZE	0x40000
+#define CONFIG_ENV_IS_NOWHERE 1
+/*#define CONFIG_ENV_IS_IN_FLASH*/
+/*#define CONFIG_ENV_SIZE		0x8000*/
+#define CONFIG_ENV_SECT_SIZE	0x40000
 #define CONFIG_ENV_OVERWRITE	1
 
 /*
  * Memory map
  */
-#define CFG_SDRAM_BASE		0x40000000
-#define CFG_SDRAM_SIZE		0x00800000
-#define CFG_SDRAM_END		(CFG_SDRAM_BASE+CFG_SDRAM_SIZE)
+#define CONFIG_SYS_SDRAM_BASE		0x40000000
+#define CONFIG_SYS_SDRAM_SIZE		0x00800000
+#define CONFIG_SYS_SDRAM_END		(CONFIG_SYS_SDRAM_BASE+CONFIG_SYS_SDRAM_SIZE)
 
 /* no SRAM available */
-#undef CFG_SRAM_BASE
-#undef CFG_SRAM_SIZE
+#undef CONFIG_SYS_SRAM_BASE
+#undef CONFIG_SYS_SRAM_SIZE
 
 
 /* Always Run U-Boot from SDRAM */
-#define CFG_RAM_BASE CFG_SDRAM_BASE
-#define CFG_RAM_SIZE CFG_SDRAM_SIZE
-#define CFG_RAM_END CFG_SDRAM_END
+#define CONFIG_SYS_RAM_BASE CONFIG_SYS_SDRAM_BASE
+#define CONFIG_SYS_RAM_SIZE CONFIG_SYS_SDRAM_SIZE
+#define CONFIG_SYS_RAM_END CONFIG_SYS_SDRAM_END
 
-#define CFG_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
-#define CFG_GBL_DATA_OFFSET	(CFG_RAM_END - CFG_GBL_DATA_SIZE)
+#define CONFIG_SYS_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
 
-#define CFG_PROM_SIZE		(8192-CFG_GBL_DATA_SIZE)
-#define CFG_PROM_OFFSET		(CFG_GBL_DATA_OFFSET-CFG_PROM_SIZE)
+#define CONFIG_SYS_PROM_SIZE		(8192-CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_PROM_OFFSET		(CONFIG_SYS_GBL_DATA_OFFSET-CONFIG_SYS_PROM_SIZE)
 
-#define CFG_INIT_SP_OFFSET	(CFG_PROM_OFFSET-32)
-#define CFG_STACK_SIZE		(0x10000-32)
+#define CONFIG_SYS_INIT_SP_OFFSET	(CONFIG_SYS_PROM_OFFSET-32)
+#define CONFIG_SYS_STACK_SIZE		(0x10000-32)
 
-#define CFG_MONITOR_BASE    TEXT_BASE
-#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
-#   define CFG_RAMBOOT		1
+#define CONFIG_SYS_MONITOR_BASE    TEXT_BASE
+#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
+#   define CONFIG_SYS_RAMBOOT		1
 #endif
 
-#define CFG_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor   */
-#define CFG_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()  */
-#define CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
+#define CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor   */
+#define CONFIG_SYS_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()  */
+#define CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
 
-#define CFG_MALLOC_END		(CFG_INIT_SP_OFFSET-CFG_STACK_SIZE)
-#define CFG_MALLOC_BASE		(CFG_MALLOC_END-CFG_MALLOC_LEN)
+#define CONFIG_SYS_MALLOC_END		(CONFIG_SYS_INIT_SP_OFFSET-CONFIG_SYS_STACK_SIZE)
+#define CONFIG_SYS_MALLOC_BASE		(CONFIG_SYS_MALLOC_END-CONFIG_SYS_MALLOC_LEN)
 
 /* relocated monitor area */
-#define CFG_RELOC_MONITOR_MAX_END   CFG_MALLOC_BASE
-#define CFG_RELOC_MONITOR_BASE     (CFG_RELOC_MONITOR_MAX_END-CFG_MONITOR_LEN)
+#define CONFIG_SYS_RELOC_MONITOR_MAX_END   CONFIG_SYS_MALLOC_BASE
+#define CONFIG_SYS_RELOC_MONITOR_BASE     (CONFIG_SYS_RELOC_MONITOR_MAX_END-CONFIG_SYS_MONITOR_LEN)
 
 /* make un relocated address from relocated address */
-#define UN_RELOC(address) (address-(CFG_RELOC_MONITOR_BASE-TEXT_BASE))
+#define UN_RELOC(address) (address-(CONFIG_SYS_RELOC_MONITOR_BASE-TEXT_BASE))
 
 /*
  * Ethernet configuration
@@ -282,37 +282,37 @@
 /*
  * Miscellaneous configurable options
  */
-#define CFG_LONGHELP		/* undef to save memory     */
-#define CFG_PROMPT		"=> "	/* Monitor Command Prompt   */
+#define CONFIG_SYS_LONGHELP		/* undef to save memory     */
+#define CONFIG_SYS_PROMPT		"=> "	/* Monitor Command Prompt   */
 #if defined(CONFIG_CMD_KGDB)
-#define CFG_CBSIZE		1024	/* Console I/O Buffer Size  */
+#define CONFIG_SYS_CBSIZE		1024	/* Console I/O Buffer Size  */
 #else
-#define CFG_CBSIZE		256	/* Console I/O Buffer Size  */
+#define CONFIG_SYS_CBSIZE		256	/* Console I/O Buffer Size  */
 #endif
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16)	/* Print Buffer Size */
-#define CFG_MAXARGS		16	/* max number of command args   */
-#define CFG_BARGSIZE		CFG_CBSIZE	/* Boot Argument Buffer Size    */
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)	/* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS		16	/* max number of command args   */
+#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size    */
 
-#define CFG_MEMTEST_START	0x00100000	/* memtest works on */
-#define CFG_MEMTEST_END		0x00f00000	/* 1 ... 15 MB in DRAM  */
+#define CONFIG_SYS_MEMTEST_START	0x00100000	/* memtest works on */
+#define CONFIG_SYS_MEMTEST_END		0x00f00000	/* 1 ... 15 MB in DRAM  */
 
-#define CFG_LOAD_ADDR		0x100000	/* default load address */
+#define CONFIG_SYS_LOAD_ADDR		0x100000	/* default load address */
 
-#define CFG_HZ			1000	/* decrementer freq: 1 ms ticks */
+#define CONFIG_SYS_HZ			1000	/* decrementer freq: 1 ms ticks */
 
 /***** Gaisler GRLIB IP-Cores Config ********/
 
-#define CFG_GRLIB_SDRAM    0
-#define CFG_GRLIB_MEMCFG1  (0x000000ff | (1<<11))
+#define CONFIG_SYS_GRLIB_SDRAM    0
+#define CONFIG_SYS_GRLIB_MEMCFG1  (0x000000ff | (1<<11))
 #if CONFIG_GRSIM
-#define CFG_GRLIB_MEMCFG2  0x82206000
+#define CONFIG_SYS_GRLIB_MEMCFG2  0x82206000
 #else
-#define CFG_GRLIB_MEMCFG2  0x00001820
+#define CONFIG_SYS_GRLIB_MEMCFG2  0x00001820
 #endif
-#define CFG_GRLIB_MEMCFG3  0x00136000
+#define CONFIG_SYS_GRLIB_MEMCFG3  0x00136000
 
 /*** LEON2 UART 1 ***/
-#define CFG_LEON2_UART1_SCALER \
+#define CONFIG_SYS_LEON2_UART1_SCALER \
 	((((CONFIG_SYS_CLK_FREQ*10)/(CONFIG_BAUDRATE*8))-5)/10)
 
 /* UART1 Define to 1 or 0 */
@@ -323,7 +323,7 @@
 
 /*** LEON2 UART 2 ***/
 
-#define CFG_LEON2_UART2_SCALER \
+#define CONFIG_SYS_LEON2_UART2_SCALER \
 	((((CONFIG_SYS_CLK_FREQ*10)/(CONFIG_BAUDRATE*8))-5)/10)
 
 /* UART2 Define to 1 or 0 */
diff --git a/include/configs/gth2.h b/include/configs/gth2.h
index 7f7190bcd..aeede0466 100644
--- a/include/configs/gth2.h
+++ b/include/configs/gth2.h
@@ -49,7 +49,7 @@
 #define CONFIG_BAUDRATE		115200
 
 /* valid baudrates */
-#define CFG_BAUDRATE_TABLE	{ 115200 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 115200 }
 
 /* Only interrupt boot if space is pressed */
 /* If a long serial cable is connected but */
@@ -107,57 +107,57 @@
 /*
  * Miscellaneous configurable options
  */
-#define CFG_LONGHELP				/* undef to save memory	     */
-#define CFG_PROMPT		"GTH2 # "	/* Monitor Command Prompt    */
-#define CFG_CBSIZE		256		/* Console I/O Buffer Size   */
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16)  /* Print Buffer Size */
-#define CFG_MAXARGS		16		/* max number of command args*/
+#define CONFIG_SYS_LONGHELP				/* undef to save memory	     */
+#define CONFIG_SYS_PROMPT		"GTH2 # "	/* Monitor Command Prompt    */
+#define CONFIG_SYS_CBSIZE		256		/* Console I/O Buffer Size   */
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)  /* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS		16		/* max number of command args*/
 
-#define CFG_MALLOC_LEN		128*1024
+#define CONFIG_SYS_MALLOC_LEN		128*1024
 
-#define CFG_BOOTPARAMS_LEN	128*1024
+#define CONFIG_SYS_BOOTPARAMS_LEN	128*1024
 
-#define CFG_MHZ			500
+#define CONFIG_SYS_MHZ			500
 
-#define CFG_MIPS_TIMER_FREQ	(CFG_MHZ * 1000000)
+#define CONFIG_SYS_MIPS_TIMER_FREQ	(CONFIG_SYS_MHZ * 1000000)
 
-#define CFG_HZ			1000
+#define CONFIG_SYS_HZ			1000
 
-#define CFG_SDRAM_BASE		0x80000000     /* Cached addr */
+#define CONFIG_SYS_SDRAM_BASE		0x80000000     /* Cached addr */
 
-#define CFG_LOAD_ADDR		0x81000000     /* default load address	*/
+#define CONFIG_SYS_LOAD_ADDR		0x81000000     /* default load address	*/
 
-#define CFG_MEMTEST_START	0x80100000
-#define CFG_MEMTEST_END		0x83000000
+#define CONFIG_SYS_MEMTEST_START	0x80100000
+#define CONFIG_SYS_MEMTEST_END		0x83000000
 
 #define CONFIG_HW_WATCHDOG	1
 
 /*-----------------------------------------------------------------------
  * FLASH and environment organization
  */
-#define CFG_MAX_FLASH_BANKS	2	/* max number of memory banks */
-#define CFG_MAX_FLASH_SECT	(128)	/* max number of sectors on one chip */
+#define CONFIG_SYS_MAX_FLASH_BANKS	2	/* max number of memory banks */
+#define CONFIG_SYS_MAX_FLASH_SECT	(128)	/* max number of sectors on one chip */
 
 #define PHYS_FLASH		0xbfc00000 /* Flash Bank #1 */
 
 /* The following #defines are needed to get flash environment right */
-#define CFG_MONITOR_BASE	TEXT_BASE
-#define CFG_MONITOR_LEN		(192 << 10)
+#define CONFIG_SYS_MONITOR_BASE	TEXT_BASE
+#define CONFIG_SYS_MONITOR_LEN		(192 << 10)
 
-#define CFG_INIT_SP_OFFSET	0x400000
+#define CONFIG_SYS_INIT_SP_OFFSET	0x400000
 
 /* We boot from this flash, selected with dip switch */
-#define CFG_FLASH_BASE		PHYS_FLASH
+#define CONFIG_SYS_FLASH_BASE		PHYS_FLASH
 
 /* timeout values are in ticks */
-#define CFG_FLASH_ERASE_TOUT	(2 * CFG_HZ) /* Timeout for Flash Erase */
-#define CFG_FLASH_WRITE_TOUT	(2 * CFG_HZ) /* Timeout for Flash Write */
+#define CONFIG_SYS_FLASH_ERASE_TOUT	(2 * CONFIG_SYS_HZ) /* Timeout for Flash Erase */
+#define CONFIG_SYS_FLASH_WRITE_TOUT	(2 * CONFIG_SYS_HZ) /* Timeout for Flash Write */
 
-#define CFG_ENV_IS_NOWHERE	1
+#define CONFIG_ENV_IS_NOWHERE	1
 
 /* Address and size of Primary Environment Sector	*/
-#define CFG_ENV_ADDR		0xB0030000
-#define CFG_ENV_SIZE		0x10000
+#define CONFIG_ENV_ADDR		0xB0030000
+#define CONFIG_ENV_SIZE		0x10000
 
 #define CONFIG_FLASH_16BIT
 
@@ -168,11 +168,11 @@
 #define CONFIG_MEMSIZE_IN_BYTES
 
 /*---ATA PCMCIA ------------------------------------*/
-#define CFG_PCMCIA_MEM_SIZE 0x4000000 /* Offset to slot 1 FIXME!!! */
+#define CONFIG_SYS_PCMCIA_MEM_SIZE 0x4000000 /* Offset to slot 1 FIXME!!! */
 
-#define CFG_PCMCIA_MEM_ADDR  0x20000000
-#define CFG_PCMCIA_IO_BASE   0x28000000
-#define CFG_PCMCIA_ATTR_BASE 0x30000000
+#define CONFIG_SYS_PCMCIA_MEM_ADDR  0x20000000
+#define CONFIG_SYS_PCMCIA_IO_BASE   0x28000000
+#define CONFIG_SYS_PCMCIA_ATTR_BASE 0x30000000
 
 #define CONFIG_PCMCIA_SLOT_A
 
@@ -183,31 +183,31 @@
 #define CONFIG_IDE_PCMCIA 1
 
 /* We only support one slot for now */
-#define CFG_IDE_MAXBUS		1	/* max. 1 IDE bus		*/
-#define CFG_IDE_MAXDEVICE	1	/* max. 1 drive per IDE bus	*/
+#define CONFIG_SYS_IDE_MAXBUS		1	/* max. 1 IDE bus		*/
+#define CONFIG_SYS_IDE_MAXDEVICE	1	/* max. 1 drive per IDE bus	*/
 
 #undef	CONFIG_IDE_LED			/* LED	 for ide not supported	*/
 #undef	CONFIG_IDE_RESET		/* reset for ide not supported	*/
 
-#define CFG_ATA_IDE0_OFFSET	0
+#define CONFIG_SYS_ATA_IDE0_OFFSET	0
 
-#define CFG_ATA_BASE_ADDR	CFG_PCMCIA_IO_BASE
+#define CONFIG_SYS_ATA_BASE_ADDR	CONFIG_SYS_PCMCIA_IO_BASE
 
 /* Offset for data I/O			*/
-#define CFG_ATA_DATA_OFFSET	0
+#define CONFIG_SYS_ATA_DATA_OFFSET	0
 
 /* Offset for normal register accesses	*/
-#define CFG_ATA_REG_OFFSET	0
+#define CONFIG_SYS_ATA_REG_OFFSET	0
 
 /* Offset for alternate registers	*/
-#define CFG_ATA_ALT_OFFSET	0x0200
+#define CONFIG_SYS_ATA_ALT_OFFSET	0x0200
 
 /*-----------------------------------------------------------------------
  * Cache Configuration
  */
-#define CFG_DCACHE_SIZE		16384
-#define CFG_ICACHE_SIZE		16384
-#define CFG_CACHELINE_SIZE	32
+#define CONFIG_SYS_DCACHE_SIZE		16384
+#define CONFIG_SYS_ICACHE_SIZE		16384
+#define CONFIG_SYS_CACHELINE_SIZE	32
 
 #define GPIO_CACONFIG  (1<<0)
 #define GPIO_DPACONFIG (1<<6)
diff --git a/include/configs/gw8260.h b/include/configs/gw8260.h
index d9187825e..53a001d21 100644
--- a/include/configs/gw8260.h
+++ b/include/configs/gw8260.h
@@ -72,7 +72,7 @@
  * 0x6       0x1     66 133     266    Close Close  Open
  * 0x6       0x2     66 133     300    Close Open   Close
  */
-#define CFG_SBC_MODCK_H 0x05
+#define CONFIG_SYS_SBC_MODCK_H 0x05
 
 /* Define this if you want to boot from 0x00000100. If you don't define
  * this, you will need to program the bootloader to 0xfff00000, and
@@ -80,48 +80,48 @@
  * way to do that is to program the bootloader at both addresses.
  * It is suggested that you just let U-Boot live at 0x00000000.
  */
-#define CFG_SBC_BOOT_LOW 1
+#define CONFIG_SYS_SBC_BOOT_LOW 1
 
 /* What should the base address of the main FLASH be and how big is
  * it (in MBytes)? This must contain TEXT_BASE from board/sbc8260/config.mk
  * The main FLASH is whichever is connected to *CS0. U-Boot expects
  * this to be the SIMM.
  */
-#define CFG_FLASH0_BASE 0x40000000
-#define CFG_FLASH0_SIZE 8
+#define CONFIG_SYS_FLASH0_BASE 0x40000000
+#define CONFIG_SYS_FLASH0_SIZE 8
 
-/* Define CFG_FLASH_CHECKSUM to enable flash checksum during boot.
+/* Define CONFIG_SYS_FLASH_CHECKSUM to enable flash checksum during boot.
  * Note: the 'flashchecksum' environment variable must also be set to 'y'.
  */
-#define CFG_FLASH_CHECKSUM
+#define CONFIG_SYS_FLASH_CHECKSUM
 
 /* What should be the base address of SDRAM DIMM and how big is
  * it (in Mbytes)?
  */
-#define CFG_SDRAM0_BASE 0x00000000
-#define CFG_SDRAM0_SIZE 64
+#define CONFIG_SYS_SDRAM0_BASE 0x00000000
+#define CONFIG_SYS_SDRAM0_SIZE 64
 
 /*
  * DRAM tests
- *   CFG_DRAM_TEST - enables the following tests.
+ *   CONFIG_SYS_DRAM_TEST - enables the following tests.
  *
- *   CFG_DRAM_TEST_DATA - Enables test for shorted or open data lines
+ *   CONFIG_SYS_DRAM_TEST_DATA - Enables test for shorted or open data lines
  *                        Environment variable 'test_dram_data' must be
  *                        set to 'y'.
- *   CFG_DRAM_TEST_DATA - Enables test to verify that each word is uniquely
+ *   CONFIG_SYS_DRAM_TEST_DATA - Enables test to verify that each word is uniquely
  *                        addressable. Environment variable
  *                        'test_dram_address' must be set to 'y'.
- *   CFG_DRAM_TEST_WALK - Enables test a 64-bit walking ones pattern test.
+ *   CONFIG_SYS_DRAM_TEST_WALK - Enables test a 64-bit walking ones pattern test.
  *                        This test takes about 6 minutes to test 64 MB.
  *                        Environment variable 'test_dram_walk' must be
  *                        set to 'y'.
  */
-#define CFG_DRAM_TEST
-#if defined(CFG_DRAM_TEST)
-#define CFG_DRAM_TEST_DATA
-#define CFG_DRAM_TEST_ADDRESS
-#define CFG_DRAM_TEST_WALK
-#endif /* CFG_DRAM_TEST */
+#define CONFIG_SYS_DRAM_TEST
+#if defined(CONFIG_SYS_DRAM_TEST)
+#define CONFIG_SYS_DRAM_TEST_DATA
+#define CONFIG_SYS_DRAM_TEST_ADDRESS
+#define CONFIG_SYS_DRAM_TEST_WALK
+#endif /* CONFIG_SYS_DRAM_TEST */
 
 /*
  * GW8260 with 16 MB DIMM:
@@ -139,11 +139,11 @@
  *                     Monitor Stack Buffer (0x80)
  *     0x00F5 FFB0     Board Info Data
  *     0x00F6 0000     Malloc Arena
- *           :          CFG_ENV_SECT_SIZE, 256k
- *           :          CFG_MALLOC_LEN,    128k
+ *           :          CONFIG_ENV_SECT_SIZE, 256k
+ *           :          CONFIG_SYS_MALLOC_LEN,    128k
  *     0x00FC 0000     RAM Copy of Monitor Code
- *           :              CFG_MONITOR_LEN,   256k
- *     0x00FF FFFF     [End of RAM], CFG_SDRAM_SIZE - 1
+ *           :              CONFIG_SYS_MONITOR_LEN,   256k
+ *     0x00FF FFFF     [End of RAM], CONFIG_SYS_SDRAM_SIZE - 1
  */
 
 /*
@@ -162,11 +162,11 @@
  *                     Monitor Stack Buffer (0x80)
  *     0x03F5 FFB0     Board Info Data
  *     0x03F6 0000     Malloc Arena
- *           :          CFG_ENV_SECT_SIZE, 256k
- *           :          CFG_MALLOC_LEN,    128k
+ *           :          CONFIG_ENV_SECT_SIZE, 256k
+ *           :          CONFIG_SYS_MALLOC_LEN,    128k
  *     0x03FC 0000     RAM Copy of Monitor Code
- *           :              CFG_MONITOR_LEN,   256k
- *     0x03FF FFFF     [End of RAM], CFG_SDRAM_SIZE - 1
+ *           :              CONFIG_SYS_MONITOR_LEN,   256k
+ *     0x03FF FFFF     [End of RAM], CONFIG_SYS_SDRAM_SIZE - 1
  */
 
 
@@ -233,10 +233,10 @@
  * - Select bus for bd/buffers (see 28-13)
  * - Enable Full Duplex in FSMR
  */
-# define CFG_CMXFCR_MASK	(CMXFCR_FC2|CMXFCR_RF2CS_MSK|CMXFCR_TF2CS_MSK)
-# define CFG_CMXFCR_VALUE	(CMXFCR_RF2CS_CLK13|CMXFCR_TF2CS_CLK14)
-# define CFG_CPMFCR_RAMTYPE	0
-# define CFG_FCC_PSMR		(FCC_PSMR_FDE | FCC_PSMR_LPB)
+# define CONFIG_SYS_CMXFCR_MASK	(CMXFCR_FC2|CMXFCR_RF2CS_MSK|CMXFCR_TF2CS_MSK)
+# define CONFIG_SYS_CMXFCR_VALUE	(CMXFCR_RF2CS_CLK13|CMXFCR_TF2CS_CLK14)
+# define CONFIG_SYS_CPMFCR_RAMTYPE	0
+# define CONFIG_SYS_FCC_PSMR		(FCC_PSMR_FDE | FCC_PSMR_LPB)
 
 #elif defined(CONFIG_ETHER_ON_FCC) && (CONFIG_ETHER_INDEX == 3)
 
@@ -246,10 +246,10 @@
  * - Select bus for bd/buffers (see 28-13)
  * - Enable Full Duplex in FSMR
  */
-# define CFG_CMXFCR_MASK	(CMXFCR_FC3|CMXFCR_RF3CS_MSK|CMXFCR_TF3CS_MSK)
-# define CFG_CMXFCR_VALUE	(CMXFCR_RF3CS_CLK15|CMXFCR_TF3CS_CLK16)
-# define CFG_CPMFCR_RAMTYPE	0
-# define CFG_FCC_PSMR		(FCC_PSMR_FDE | FCC_PSMR_LPB)
+# define CONFIG_SYS_CMXFCR_MASK	(CMXFCR_FC3|CMXFCR_RF3CS_MSK|CMXFCR_TF3CS_MSK)
+# define CONFIG_SYS_CMXFCR_VALUE	(CMXFCR_RF3CS_CLK15|CMXFCR_TF3CS_CLK16)
+# define CONFIG_SYS_CPMFCR_RAMTYPE	0
+# define CONFIG_SYS_FCC_PSMR		(FCC_PSMR_FDE | FCC_PSMR_LPB)
 
 #endif /* CONFIG_ETHER_ON_FCC, CONFIG_ETHER_INDEX */
 
@@ -258,7 +258,7 @@
  * put in the same sector as U-Boot, and changing variables
  * will erase U-Boot temporarily
  */
-#define CFG_ENV_IN_OWN_SECT
+#define CONFIG_ENV_IN_OWN_SECT
 
 /* Define to allow the user to overwrite serial and ethaddr */
 #define CONFIG_ENV_OVERWRITE
@@ -297,10 +297,10 @@
 #define CONFIG_BOOTP_DNS
 
 /* undef this to save memory */
-#define CFG_LONGHELP
+#define CONFIG_SYS_LONGHELP
 
 /* Monitor Command Prompt */
-#define CFG_PROMPT      "=> "
+#define CONFIG_SYS_PROMPT      "=> "
 
 
 /*
@@ -319,16 +319,16 @@
 
 
 /* Where do the internal registers live? */
-#define CFG_IMMR        0xf0000000
+#define CONFIG_SYS_IMMR        0xf0000000
 
 /* Use the HUSH parser */
-#define CFG_HUSH_PARSER
-#ifdef  CFG_HUSH_PARSER
-#define CFG_PROMPT_HUSH_PS2 "> "
+#define CONFIG_SYS_HUSH_PARSER
+#ifdef  CONFIG_SYS_HUSH_PARSER
+#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
 #endif
 
 /* What is the address of IO controller */
-#define CFG_IO_BASE 0xe0000000
+#define CONFIG_SYS_IO_BASE 0xe0000000
 
 /*****************************************************************************
  *
@@ -344,44 +344,44 @@
  * Miscellaneous configurable options
  */
 #if defined(CONFIG_CMD_KGDB)
-#  define CFG_CBSIZE        1024    /* Console I/O Buffer Size       */
+#  define CONFIG_SYS_CBSIZE        1024    /* Console I/O Buffer Size       */
 #else
-#  define CFG_CBSIZE        256     /* Console I/O Buffer Size       */
+#  define CONFIG_SYS_CBSIZE        256     /* Console I/O Buffer Size       */
 #endif
 
 /* Print Buffer Size */
-#define CFG_PBSIZE    (CFG_CBSIZE + sizeof(CFG_PROMPT)+16)
+#define CONFIG_SYS_PBSIZE    (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT)+16)
 
-#define CFG_MAXARGS     8          /* max number of command args   */
+#define CONFIG_SYS_MAXARGS     8          /* max number of command args   */
 
-#define CFG_BARGSIZE    CFG_CBSIZE /* Boot Argument Buffer Size    */
+#define CONFIG_SYS_BARGSIZE    CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size    */
 
 /* Convert clocks to MHZ when passing board info to kernel.
  * This must be defined for eariler 2.4 kernels (~2.4.4).
  */
 #define CONFIG_CLOCKS_IN_MHZ
 
-#define CFG_LOAD_ADDR   0x100000 /* default load address */
-#define CFG_HZ          1000     /* decrementer freq: 1 ms ticks */
+#define CONFIG_SYS_LOAD_ADDR   0x100000 /* default load address */
+#define CONFIG_SYS_HZ          1000     /* decrementer freq: 1 ms ticks */
 
 
 /* memtest works from the end of the exception vector table
  * to the end of the DRAM less monitor and malloc area
  */
-#define CFG_MEMTEST_START   0x2000
+#define CONFIG_SYS_MEMTEST_START   0x2000
 
-#define CFG_STACK_USAGE     0x10000 /* Reserve 64k for the stack usage */
+#define CONFIG_SYS_STACK_USAGE     0x10000 /* Reserve 64k for the stack usage */
 
-#define CFG_MEM_END_USAGE   ( CFG_MONITOR_LEN \
-			    + CFG_MALLOC_LEN \
-			    + CFG_ENV_SECT_SIZE \
-			    + CFG_STACK_USAGE )
+#define CONFIG_SYS_MEM_END_USAGE   ( CONFIG_SYS_MONITOR_LEN \
+			    + CONFIG_SYS_MALLOC_LEN \
+			    + CONFIG_ENV_SECT_SIZE \
+			    + CONFIG_SYS_STACK_USAGE )
 
-#define CFG_MEMTEST_END     ( CFG_SDRAM_SIZE * 1024 * 1024 \
-			    - CFG_MEM_END_USAGE )
+#define CONFIG_SYS_MEMTEST_END     ( CONFIG_SYS_SDRAM_SIZE * 1024 * 1024 \
+			    - CONFIG_SYS_MEM_END_USAGE )
 
 /* valid baudrates */
-#define CFG_BAUDRATE_TABLE  { 9600, 19200, 38400, 57600, 115200 }
+#define CONFIG_SYS_BAUDRATE_TABLE  { 9600, 19200, 38400, 57600, 115200 }
 
 /*
  * Low Level Configuration Settings
@@ -389,98 +389,98 @@
  * You should know what you are doing if you make changes here.
  */
 
-#define CFG_FLASH_BASE  CFG_FLASH0_BASE
-#define CFG_FLASH_SIZE  CFG_FLASH0_SIZE
-#define CFG_SDRAM_BASE  CFG_SDRAM0_BASE
-#define CFG_SDRAM_SIZE  CFG_SDRAM0_SIZE
+#define CONFIG_SYS_FLASH_BASE  CONFIG_SYS_FLASH0_BASE
+#define CONFIG_SYS_FLASH_SIZE  CONFIG_SYS_FLASH0_SIZE
+#define CONFIG_SYS_SDRAM_BASE  CONFIG_SYS_SDRAM0_BASE
+#define CONFIG_SYS_SDRAM_SIZE  CONFIG_SYS_SDRAM0_SIZE
 
 /*-----------------------------------------------------------------------
  * Hard Reset Configuration Words
  */
-#if defined(CFG_SBC_BOOT_LOW)
-#  define  CFG_SBC_HRCW_BOOT_FLAGS  (HRCW_CIP | HRCW_BMS)
+#if defined(CONFIG_SYS_SBC_BOOT_LOW)
+#  define  CONFIG_SYS_SBC_HRCW_BOOT_FLAGS  (HRCW_CIP | HRCW_BMS)
 #else
-#  define  CFG_SBC_HRCW_BOOT_FLAGS  (0)
-#endif /* defined(CFG_SBC_BOOT_LOW) */
+#  define  CONFIG_SYS_SBC_HRCW_BOOT_FLAGS  (0)
+#endif /* defined(CONFIG_SYS_SBC_BOOT_LOW) */
 
-/* get the HRCW ISB field from CFG_IMMR */
-#define CFG_SBC_HRCW_IMMR   ( ((CFG_IMMR & 0x10000000) >> 10) | \
-		  ((CFG_IMMR & 0x01000000) >>  7) | \
-		  ((CFG_IMMR & 0x00100000) >>  4) )
+/* get the HRCW ISB field from CONFIG_SYS_IMMR */
+#define CONFIG_SYS_SBC_HRCW_IMMR   ( ((CONFIG_SYS_IMMR & 0x10000000) >> 10) | \
+		  ((CONFIG_SYS_IMMR & 0x01000000) >>  7) | \
+		  ((CONFIG_SYS_IMMR & 0x00100000) >>  4) )
 
-#define CFG_HRCW_MASTER     ( HRCW_BPS11                | \
+#define CONFIG_SYS_HRCW_MASTER     ( HRCW_BPS11                | \
 		  HRCW_DPPC11               | \
-		  CFG_SBC_HRCW_IMMR         | \
+		  CONFIG_SYS_SBC_HRCW_IMMR         | \
 		  HRCW_MMR00                | \
 		  HRCW_LBPC11               | \
 		  HRCW_APPC10               | \
 		  HRCW_CS10PC00             | \
-		  (CFG_SBC_MODCK_H & HRCW_MODCK_H1111)  | \
-		  CFG_SBC_HRCW_BOOT_FLAGS )
+		  (CONFIG_SYS_SBC_MODCK_H & HRCW_MODCK_H1111)  | \
+		  CONFIG_SYS_SBC_HRCW_BOOT_FLAGS )
 
 /* no slaves */
-#define CFG_HRCW_SLAVE1     0
-#define CFG_HRCW_SLAVE2     0
-#define CFG_HRCW_SLAVE3     0
-#define CFG_HRCW_SLAVE4     0
-#define CFG_HRCW_SLAVE5     0
-#define CFG_HRCW_SLAVE6     0
-#define CFG_HRCW_SLAVE7     0
+#define CONFIG_SYS_HRCW_SLAVE1     0
+#define CONFIG_SYS_HRCW_SLAVE2     0
+#define CONFIG_SYS_HRCW_SLAVE3     0
+#define CONFIG_SYS_HRCW_SLAVE4     0
+#define CONFIG_SYS_HRCW_SLAVE5     0
+#define CONFIG_SYS_HRCW_SLAVE6     0
+#define CONFIG_SYS_HRCW_SLAVE7     0
 
 /*-----------------------------------------------------------------------
  * Definitions for initial stack pointer and data area (in DPRAM)
  */
-#define CFG_INIT_RAM_ADDR    CFG_IMMR
-#define CFG_INIT_RAM_END     0x4000  /* End of used area in DPRAM    */
-#define CFG_GBL_DATA_SIZE   128 /* bytes reserved for initial data */
-#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP_OFFSET   CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_INIT_RAM_ADDR    CONFIG_SYS_IMMR
+#define CONFIG_SYS_INIT_RAM_END     0x4000  /* End of used area in DPRAM    */
+#define CONFIG_SYS_GBL_DATA_SIZE   128 /* bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET   CONFIG_SYS_GBL_DATA_OFFSET
 
 /*-----------------------------------------------------------------------
  * Start addresses for the final memory configuration
  * (Set up by the startup code)
- * Please note that CFG_SDRAM_BASE _must_ start at 0
- * Note also that the logic that sets CFG_RAMBOOT is platform dependent.
+ * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
+ * Note also that the logic that sets CONFIG_SYS_RAMBOOT is platform dependent.
  */
-#define CFG_MONITOR_BASE    CFG_FLASH0_BASE
+#define CONFIG_SYS_MONITOR_BASE    CONFIG_SYS_FLASH0_BASE
 
-#define CFG_MONITOR_LEN     (256 * 1024) /* Reserve 256 kB for Monitor   */
-#define CFG_MALLOC_LEN      (128 * 1024) /* Reserve 128 kB for malloc()  */
+#define CONFIG_SYS_MONITOR_LEN     (256 * 1024) /* Reserve 256 kB for Monitor   */
+#define CONFIG_SYS_MALLOC_LEN      (128 * 1024) /* Reserve 128 kB for malloc()  */
 
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define CFG_BOOTMAPSZ       (8 * 1024 * 1024) /* Initial Memory map for Linux */
+#define CONFIG_SYS_BOOTMAPSZ       (8 * 1024 * 1024) /* Initial Memory map for Linux */
 
 /*-----------------------------------------------------------------------
  * FLASH and environment organization
  */
-#define CFG_MAX_FLASH_BANKS   1    /* max number of memory banks        */
-#define CFG_MAX_FLASH_SECT    32   /* max number of sectors on one chip */
+#define CONFIG_SYS_MAX_FLASH_BANKS   1    /* max number of memory banks        */
+#define CONFIG_SYS_MAX_FLASH_SECT    32   /* max number of sectors on one chip */
 
-#define CFG_FLASH_ERASE_TOUT  8000 /* Timeout for Flash Erase (in ms)   */
-#define CFG_FLASH_WRITE_TOUT  1    /* Timeout for Flash Write (in ms)   */
+#define CONFIG_SYS_FLASH_ERASE_TOUT  8000 /* Timeout for Flash Erase (in ms)   */
+#define CONFIG_SYS_FLASH_WRITE_TOUT  1    /* Timeout for Flash Write (in ms)   */
 
-#define CFG_ENV_IS_IN_FLASH   1
+#define CONFIG_ENV_IS_IN_FLASH   1
 
-#ifdef CFG_ENV_IN_OWN_SECT
-#  define CFG_ENV_ADDR        (CFG_MONITOR_BASE +  (256 * 1024))
-#  define CFG_ENV_SECT_SIZE   (256 * 1024)
+#ifdef CONFIG_ENV_IN_OWN_SECT
+#  define CONFIG_ENV_ADDR        (CONFIG_SYS_MONITOR_BASE +  (256 * 1024))
+#  define CONFIG_ENV_SECT_SIZE   (256 * 1024)
 #else
-#  define CFG_ENV_SIZE        (16 * 1024)/* Size of Environment Sector  */
-#  define CFG_ENV_ADD  ((CFG_MONITOR_BASE + CFG_MONITOR_LEN) - CFG_ENV_SIZE)
-#  define CFG_ENV_SECT_SIZE (256 * 1024)/* see README - env sect real size  */
-#endif /* CFG_ENV_IN_OWN_SECT */
+#  define CONFIG_ENV_SIZE        (16 * 1024)/* Size of Environment Sector  */
+#  define CONFIG_ENV_ADD  ((CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN) - CONFIG_ENV_SIZE)
+#  define CONFIG_ENV_SECT_SIZE (256 * 1024)/* see README - env sect real size  */
+#endif /* CONFIG_ENV_IN_OWN_SECT */
 
 /*-----------------------------------------------------------------------
  * Cache Configuration
  */
-#define CFG_CACHELINE_SIZE  32      /* For MPC8260 CPU */
+#define CONFIG_SYS_CACHELINE_SIZE  32      /* For MPC8260 CPU */
 
 #if defined(CONFIG_CMD_KGDB)
-# define CFG_CACHELINE_SHIFT    5   /* log base 2 of the above value */
+# define CONFIG_SYS_CACHELINE_SHIFT    5   /* log base 2 of the above value */
 #endif
 
 /*-----------------------------------------------------------------------
@@ -493,36 +493,36 @@
  *
  * HID1 has only read-only information - nothing to set.
  */
-#define CFG_HID0_INIT   (HID0_ICE  |\
+#define CONFIG_SYS_HID0_INIT   (HID0_ICE  |\
 			 HID0_DCE  |\
 			 HID0_ICFI |\
 			 HID0_DCI  |\
 			 HID0_IFEM |\
 			 HID0_ABE)
 
-#define CFG_HID0_FINAL  (HID0_ICE  |\
+#define CONFIG_SYS_HID0_FINAL  (HID0_ICE  |\
 			 HID0_IFEM |\
 			 HID0_ABE  |\
 			 HID0_EMCP)
-#define CFG_HID2    0
+#define CONFIG_SYS_HID2    0
 
 /*-----------------------------------------------------------------------
  * RMR - Reset Mode Register
  *-----------------------------------------------------------------------
  */
-#define CFG_RMR     0
+#define CONFIG_SYS_RMR     0
 
 /*-----------------------------------------------------------------------
  * BCR - Bus Configuration                           4-25
  *-----------------------------------------------------------------------
  */
-#define CFG_BCR     (BCR_ETM)
+#define CONFIG_SYS_BCR     (BCR_ETM)
 
 /*-----------------------------------------------------------------------
  * SIUMCR - SIU Module Configuration                 4-31
  *-----------------------------------------------------------------------
  */
-#define CFG_SIUMCR  (SIUMCR_DPPC11  |\
+#define CONFIG_SYS_SIUMCR  (SIUMCR_DPPC11  |\
 		     SIUMCR_L2CPC00 |\
 		     SIUMCR_APPC10  |\
 		     SIUMCR_MMR00)
@@ -534,7 +534,7 @@
  *-----------------------------------------------------------------------
  * Watchdog & Bus Monitor Timer max, 60x Bus Monitor enable
  */
-#define CFG_SYPCR   (SYPCR_SWTC |\
+#define CONFIG_SYS_SYPCR   (SYPCR_SWTC |\
 		     SYPCR_BMT  |\
 		     SYPCR_PBME |\
 		     SYPCR_LBME |\
@@ -547,7 +547,7 @@
  * Clear once per Second and Alarm Interrupt Status, Set 32KHz timersclk,
  * and enable Time Counter
  */
-#define CFG_TMCNTSC (TMCNTSC_SEC |\
+#define CONFIG_SYS_TMCNTSC (TMCNTSC_SEC |\
 		     TMCNTSC_ALR |\
 		     TMCNTSC_TCF |\
 		     TMCNTSC_TCE)
@@ -558,7 +558,7 @@
  * Clear Periodic Interrupt Status, Set 32KHz timersclk, and enable
  * Periodic timer
  */
-#define CFG_PISCR   (PISCR_PS  |\
+#define CONFIG_SYS_PISCR   (PISCR_PS  |\
 		     PISCR_PTF |\
 		     PISCR_PTE)
 
@@ -566,13 +566,13 @@
  * SCCR - System Clock Control                           9-8
  *-----------------------------------------------------------------------
  */
-#define CFG_SCCR    0
+#define CONFIG_SYS_SCCR    0
 
 /*-----------------------------------------------------------------------
  * RCCR - RISC Controller Configuration                 13-7
  *-----------------------------------------------------------------------
  */
-#define CFG_RCCR    0
+#define CONFIG_SYS_RCCR    0
 
 /*
  * Initialize Memory Controller:
@@ -618,7 +618,7 @@
  *     - No data pipelining is done
  *     - Valid
  */
-#define CFG_BR0_PRELIM  ((CFG_FLASH0_BASE & BRx_BA_MSK) |\
+#define CONFIG_SYS_BR0_PRELIM  ((CONFIG_SYS_FLASH0_BASE & BRx_BA_MSK) |\
 			  BRx_PS_32                     |\
 			  BRx_MS_GPCM_P                 |\
 			  BRx_V)
@@ -637,7 +637,7 @@
  *     - One idle clock is inserted between a read access from the
  *       current bank and the next access.
  */
-#define CFG_OR0_PRELIM  (MEG_TO_AM(CFG_FLASH0_SIZE) |\
+#define CONFIG_SYS_OR0_PRELIM  (MEG_TO_AM(CONFIG_SYS_FLASH0_SIZE) |\
 			 ORxG_CSNT          |\
 			 ORxG_ACS_DIV1      |\
 			 ORxG_SCY_5_CLK     |\
@@ -673,7 +673,7 @@
  *     - No data pipelining is done
  *     - Valid
  */
-#define CFG_BR2_PRELIM  ((CFG_SDRAM0_BASE & BRx_BA_MSK) |\
+#define CONFIG_SYS_BR2_PRELIM  ((CONFIG_SYS_SDRAM0_BASE & BRx_BA_MSK) |\
 			  BRx_PS_64          |\
 			  BRx_MS_SDRAM_P     |\
 			  BRx_V)
@@ -687,8 +687,8 @@
  *     - Back-to-back page mode
  *     - Internal bank interleaving within save device enabled
  */
-#if (CFG_SDRAM0_SIZE == 16)
-#define CFG_OR2_PRELIM  (MEG_TO_AM(CFG_SDRAM0_SIZE) |\
+#if (CONFIG_SYS_SDRAM0_SIZE == 16)
+#define CONFIG_SYS_OR2_PRELIM  (MEG_TO_AM(CONFIG_SYS_SDRAM0_SIZE) |\
 			 ORxS_BPD_2         |\
 			 ORxS_ROWST_PBI0_A9 |\
 			 ORxS_NUMR_11)
@@ -716,7 +716,7 @@
  *     Ref: Section 10.3.3 on page 10-21
  *-----------------------------------------------------------------------
  */
-#define CFG_PSDMR   (PSDMR_RFEN       |\
+#define CONFIG_SYS_PSDMR   (PSDMR_RFEN       |\
 		     PSDMR_SDAM_A14_IS_A5 |\
 		     PSDMR_BSMA_A16_A18   |\
 		     PSDMR_SDA10_PBI0_A9  |\
@@ -726,7 +726,7 @@
 		     PSDMR_LDOTOPRE_1C    |\
 		     PSDMR_WRC_1C         |\
 		     PSDMR_CL_2)
-#endif /* (CFG_SDRAM0_SIZE == 16) */
+#endif /* (CONFIG_SYS_SDRAM0_SIZE == 16) */
 
 /* With a 64 MB DIMM, the OR2 is configured as follows:
  *
@@ -737,8 +737,8 @@
  *     - Back-to-back page mode
  *     - Internal bank interleaving within save device enabled
  */
-#if (CFG_SDRAM0_SIZE == 64)
-#define CFG_OR2_PRELIM  (MEG_TO_AM(CFG_SDRAM0_SIZE) |\
+#if (CONFIG_SYS_SDRAM0_SIZE == 64)
+#define CONFIG_SYS_OR2_PRELIM  (MEG_TO_AM(CONFIG_SYS_SDRAM0_SIZE) |\
 	     ORxS_BPD_4         |\
 	     ORxS_ROWST_PBI0_A8     |\
 	     ORxS_NUMR_12)
@@ -766,7 +766,7 @@
  *     Ref: Section 10.3.3 on page 10-21
  *-----------------------------------------------------------------------
  */
-#define CFG_PSDMR   (PSDMR_RFEN       |\
+#define CONFIG_SYS_PSDMR   (PSDMR_RFEN       |\
 		     PSDMR_SDAM_A14_IS_A5 |\
 		     PSDMR_BSMA_A14_A16   |\
 		     PSDMR_SDA10_PBI0_A9  |\
@@ -776,10 +776,10 @@
 		     PSDMR_LDOTOPRE_1C    |\
 		     PSDMR_WRC_1C         |\
 		     PSDMR_CL_2)
-#endif  /* (CFG_SDRAM0_SIZE == 64) */
+#endif  /* (CONFIG_SYS_SDRAM0_SIZE == 64) */
 
-#define CFG_PSRT    0x0e
-#define CFG_MPTPR   MPTPR_PTP_DIV32
+#define CONFIG_SYS_PSRT    0x0e
+#define CONFIG_SYS_MPTPR   MPTPR_PTP_DIV32
 
 
 /*-----------------------------------------------------------------------
@@ -804,16 +804,16 @@
  *     - 11 wait states
  */
 
-#ifdef CFG_IO_BASE
-#  define CFG_BR4_PRELIM  ((CFG_IO_BASE & BRx_BA_MSK)  |\
+#ifdef CONFIG_SYS_IO_BASE
+#  define CONFIG_SYS_BR4_PRELIM  ((CONFIG_SYS_IO_BASE & BRx_BA_MSK)  |\
 			    BRx_PS_8                   |\
 			    BRx_MS_GPCM_L              |\
 			    BRx_V)
 
-#  define CFG_OR4_PRELIM   (ORxG_AM_MSK                |\
+#  define CONFIG_SYS_OR4_PRELIM   (ORxG_AM_MSK                |\
 			    ORxG_SCY_11_CLK            |\
 			    ORxG_EHTR)
-#endif /* CFG_IO_BASE */
+#endif /* CONFIG_SYS_IO_BASE */
 
 /*
  * Internal Definitions
diff --git a/include/configs/hammerhead.h b/include/configs/hammerhead.h
index fca411186..0c70af574 100644
--- a/include/configs/hammerhead.h
+++ b/include/configs/hammerhead.h
@@ -29,7 +29,7 @@
 #define CONFIG_AT32AP7000		1
 #define CONFIG_HAMMERHEAD		1
 
-#define CFG_HZ				1000
+#define CONFIG_SYS_HZ				1000
 
 /*
  * Set up the PLL to run at 125 MHz, the CPU to run at the PLL
@@ -37,15 +37,15 @@
  * and the PBA bus to run at 1/4 the PLL frequency.
  */
 #define CONFIG_PLL			1
-#define CFG_POWER_MANAGER		1
-#define CFG_OSC0_HZ			25000000
-#define CFG_PLL0_DIV			1
-#define CFG_PLL0_MUL			5
-#define CFG_PLL0_SUPPRESS_CYCLES	16
-#define CFG_CLKDIV_CPU			0
-#define CFG_CLKDIV_HSB			1
-#define CFG_CLKDIV_PBA			2
-#define CFG_CLKDIV_PBB			1
+#define CONFIG_SYS_POWER_MANAGER		1
+#define CONFIG_SYS_OSC0_HZ			25000000
+#define CONFIG_SYS_PLL0_DIV			1
+#define CONFIG_SYS_PLL0_MUL			5
+#define CONFIG_SYS_PLL0_SUPPRESS_CYCLES	16
+#define CONFIG_SYS_CLKDIV_CPU			0
+#define CONFIG_SYS_CLKDIV_HSB			1
+#define CONFIG_SYS_CLKDIV_PBA			2
+#define CONFIG_SYS_CLKDIV_PBB			1
 
 /*
  * The PLLOPT register controls the PLL like this:
@@ -54,7 +54,7 @@
  *
  * We want icp=1 (default) and ivco=0 (80-160 MHz) or ivco=2 (150-240MHz).
  */
-#define CFG_PLL0_OPT			0x04
+#define CONFIG_SYS_PLL0_OPT			0x04
 
 #define CONFIG_USART1			1
 
@@ -118,55 +118,55 @@
 #define CONFIG_ATMEL_USART		1
 #define CONFIG_MACB			1
 #define CONFIG_PORTMUX_PIO		1
-#define CFG_NR_PIOS			5
-#define CFG_HSDRAMC			1
+#define CONFIG_SYS_NR_PIOS			5
+#define CONFIG_SYS_HSDRAMC			1
 #define CONFIG_MMC			1
 #define CONFIG_ATMEL_MCI		1
 
-#define CFG_DCACHE_LINESZ		32
-#define CFG_ICACHE_LINESZ		32
+#define CONFIG_SYS_DCACHE_LINESZ		32
+#define CONFIG_SYS_ICACHE_LINESZ		32
 
 #define CONFIG_NR_DRAM_BANKS		1
 
-#define CFG_FLASH_CFI			1
+#define CONFIG_SYS_FLASH_CFI			1
 #define CONFIG_FLASH_CFI_DRIVER		1
 
-#define CFG_FLASH_BASE			0x00000000
-#define CFG_FLASH_SIZE			0x800000
-#define CFG_MAX_FLASH_BANKS		1
-#define CFG_MAX_FLASH_SECT		135
+#define CONFIG_SYS_FLASH_BASE			0x00000000
+#define CONFIG_SYS_FLASH_SIZE			0x800000
+#define CONFIG_SYS_MAX_FLASH_BANKS		1
+#define CONFIG_SYS_MAX_FLASH_SECT		135
 
-#define CFG_MONITOR_BASE		CFG_FLASH_BASE
+#define CONFIG_SYS_MONITOR_BASE		CONFIG_SYS_FLASH_BASE
 
-#define CFG_INTRAM_BASE			0x24000000
-#define CFG_INTRAM_SIZE			0x8000
+#define CONFIG_SYS_INTRAM_BASE			0x24000000
+#define CONFIG_SYS_INTRAM_SIZE			0x8000
 
-#define CFG_SDRAM_BASE			0x10000000
+#define CONFIG_SYS_SDRAM_BASE			0x10000000
 
-#define CFG_ENV_IS_IN_FLASH		1
-#define CFG_ENV_SIZE			65536
-#define CFG_ENV_ADDR			(CFG_FLASH_BASE + CFG_FLASH_SIZE - CFG_ENV_SIZE)
+#define CONFIG_ENV_IS_IN_FLASH		1
+#define CONFIG_ENV_SIZE			65536
+#define CONFIG_ENV_ADDR			(CONFIG_SYS_FLASH_BASE + CONFIG_SYS_FLASH_SIZE - CONFIG_ENV_SIZE)
 
-#define CFG_INIT_SP_ADDR		(CFG_INTRAM_BASE + CFG_INTRAM_SIZE)
+#define CONFIG_SYS_INIT_SP_ADDR		(CONFIG_SYS_INTRAM_BASE + CONFIG_SYS_INTRAM_SIZE)
 
-#define CFG_MALLOC_LEN			(256*1024)
+#define CONFIG_SYS_MALLOC_LEN			(256*1024)
 
-#define CFG_DMA_ALLOC_LEN		(16384)
+#define CONFIG_SYS_DMA_ALLOC_LEN		(16384)
 
 /* Allow 4MB for the kernel run-time image */
-#define CFG_LOAD_ADDR			(CFG_SDRAM_BASE + 0x00400000)
-#define CFG_BOOTPARAMS_LEN		(16 * 1024)
+#define CONFIG_SYS_LOAD_ADDR			(CONFIG_SYS_SDRAM_BASE + 0x00400000)
+#define CONFIG_SYS_BOOTPARAMS_LEN		(16 * 1024)
 
 /* Other configuration settings that shouldn't have to change all that often */
-#define CFG_PROMPT			"Hammerhead> "
-#define CFG_CBSIZE			256
-#define CFG_MAXARGS			16
-#define CFG_PBSIZE			(CFG_CBSIZE + sizeof(CFG_PROMPT) + 16)
-#define CFG_LONGHELP			1
+#define CONFIG_SYS_PROMPT			"Hammerhead> "
+#define CONFIG_SYS_CBSIZE			256
+#define CONFIG_SYS_MAXARGS			16
+#define CONFIG_SYS_PBSIZE			(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
+#define CONFIG_SYS_LONGHELP			1
 
-#define CFG_MEMTEST_START		CFG_SDRAM_BASE
-#define CFG_MEMTEST_END			(CFG_MEMTEST_START + 0x1f00000)
+#define CONFIG_SYS_MEMTEST_START		CONFIG_SYS_SDRAM_BASE
+#define CONFIG_SYS_MEMTEST_END			(CONFIG_SYS_MEMTEST_START + 0x1f00000)
 
-#define CFG_BAUDRATE_TABLE { 115200, 38400, 19200, 9600, 2400 }
+#define CONFIG_SYS_BAUDRATE_TABLE { 115200, 38400, 19200, 9600, 2400 }
 
 #endif /* __CONFIG_H */
diff --git a/include/configs/hcu4.h b/include/configs/hcu4.h
index d99ac5355..369b36894 100644
--- a/include/configs/hcu4.h
+++ b/include/configs/hcu4.h
@@ -35,6 +35,12 @@
 #define CONFIG_4xx		1		/* ... PPC4xx family	*/
 #define CONFIG_405GP 1
 #define CONFIG_4xx   1
+#define CONFIG_HOSTNAME		hcu4
+
+/*
+ * Include common defines/options for all boards produced by Netstal Maschinen
+ */
+#include "netstal-common.h"
 
 #define CONFIG_SYS_CLK_FREQ	33333333	/* external freq to pll	*/
 
@@ -45,179 +51,103 @@
  * Base addresses -- Note these are effective addresses where the
  * actual resources get mapped (not physical addresses)
 *----------------------------------------------------------------------*/
-#define CFG_MONITOR_LEN	(320 * 1024)	/* Reserve 320 kB for Monitor	*/
-#define CFG_MALLOC_LEN		(256 * 1024) /* Reserve 256 kB for malloc() */
+#define CONFIG_SYS_MONITOR_LEN	(320 * 1024)	/* Reserve 320 kB for Monitor	*/
+#define CONFIG_SYS_MALLOC_LEN		(256 * 1024) /* Reserve 256 kB for malloc() */
 
 
-#define CFG_SDRAM_BASE		0x00000000	/* _must_ be 0		*/
-#define CFG_FLASH_BASE		0xfff80000	/* start of FLASH	*/
-#define CFG_MONITOR_BASE	TEXT_BASE
+#define CONFIG_SYS_SDRAM_BASE		0x00000000	/* _must_ be 0		*/
+#define CONFIG_SYS_FLASH_BASE		0xfff80000	/* start of FLASH	*/
+#define CONFIG_SYS_MONITOR_BASE	TEXT_BASE
 
 /* ... with on-chip memory here (4KBytes) */
-#define CFG_OCM_DATA_ADDR 0xF4000000
-#define CFG_OCM_DATA_SIZE 0x00001000
+#define CONFIG_SYS_OCM_DATA_ADDR 0xF4000000
+#define CONFIG_SYS_OCM_DATA_SIZE 0x00001000
 /* Do not set up locked dcache as init ram. */
-#undef CFG_INIT_DCACHE_CS
+#undef CONFIG_SYS_INIT_DCACHE_CS
 
 /* Use the On-Chip-Memory (OCM) as a temporary stack for the startup code. */
-#define CFG_TEMP_STACK_OCM 1
+#define CONFIG_SYS_TEMP_STACK_OCM 1
 
-#define CFG_INIT_RAM_ADDR	CFG_OCM_DATA_ADDR	/* OCM		*/
-#define CFG_INIT_RAM_END	CFG_OCM_DATA_SIZE
-#define CFG_GBL_DATA_SIZE	256		/* num bytes initial data */
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP_OFFSET	CFG_POST_WORD_ADDR
+#define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_OCM_DATA_ADDR	/* OCM		*/
+#define CONFIG_SYS_INIT_RAM_END	CONFIG_SYS_OCM_DATA_SIZE
+#define CONFIG_SYS_GBL_DATA_SIZE	256		/* num bytes initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_POST_WORD_ADDR
 
 /*-----------------------------------------------------------------------
  * Serial Port
  *----------------------------------------------------------------------*/
 /*
- * If CFG_EXT_SERIAL_CLOCK, then the UART divisor is 1.
- * If CFG_405_UART_ERRATA_59, then UART divisor is 31.
- * Otherwise, UART divisor is determined by CPU Clock and CFG_BASE_BAUD value.
+ * If CONFIG_SYS_EXT_SERIAL_CLOCK, then the UART divisor is 1.
+ * If CONFIG_SYS_405_UART_ERRATA_59, then UART divisor is 31.
+ * Otherwise, UART divisor is determined by CPU Clock and CONFIG_SYS_BASE_BAUD value.
  * The Linux BASE_BAUD define should match this configuration.
  *    baseBaud = cpuClock/(uartDivisor*16)
- * If CFG_405_UART_ERRATA_59 and 200MHz CPU clock,
+ * If CONFIG_SYS_405_UART_ERRATA_59 and 200MHz CPU clock,
  * set Linux BASE_BAUD to 403200.
  */
-#undef CFG_EXT_SERIAL_CLOCK	       /* external serial clock */
-#define CONFIG_SERIAL_MULTI  1
-/* needed to be able to define CONFIG_SERIAL_SOFTWARE_FIFO */
-#undef	CFG_405_UART_ERRATA_59	       /* 405GP/CR Rev. D silicon */
-#define CFG_BASE_BAUD	    691200
-
-/* Size (bytes) of interrupt driven serial port buffer.
- * Set to 0 to use polling instead of interrupts.
- * Setting to 0 will also disable RTS/CTS handshaking.
- */
-#undef CONFIG_SERIAL_SOFTWARE_FIFO
+#undef	CONFIG_SYS_405_UART_ERRATA_59	       /* 405GP/CR Rev. D silicon */
+#define CONFIG_SYS_BASE_BAUD	    691200
 
 /* Set console baudrate to 9600 */
 #define CONFIG_BAUDRATE		9600
 
-
-#define CFG_BAUDRATE_TABLE						\
-	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
-
 /*-----------------------------------------------------------------------
  * Flash
  *----------------------------------------------------------------------*/
 
 /* Use common CFI driver */
-#define CFG_FLASH_CFI
+#define CONFIG_SYS_FLASH_CFI
 #define CONFIG_FLASH_CFI_DRIVER
 /* board provides its own flash_init code */
 #define CONFIG_FLASH_CFI_LEGACY		1
-#define CFG_FLASH_CFI_WIDTH		FLASH_CFI_8BIT
-#define CFG_FLASH_LEGACY_512Kx8 1
+#define CONFIG_SYS_FLASH_CFI_WIDTH		FLASH_CFI_8BIT
+#define CONFIG_SYS_FLASH_LEGACY_512Kx8 1
 
 /* print 'E' for empty sector on flinfo */
-#define CFG_FLASH_EMPTY_INFO
+#define CONFIG_SYS_FLASH_EMPTY_INFO
 
-#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks */
-#define CFG_MAX_FLASH_SECT	8	/* max number of sectors on one chip */
+#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks */
+#define CONFIG_SYS_MAX_FLASH_SECT	8	/* max number of sectors on one chip */
 
 /*-----------------------------------------------------------------------
  * Environment
  *----------------------------------------------------------------------*/
 
-#undef	CFG_ENV_IS_IN_NVRAM
-#define CFG_ENV_IS_IN_FLASH
-#undef  CFG_ENV_IS_NOWHERE
+#undef	CONFIG_ENV_IS_IN_NVRAM
+#define CONFIG_ENV_IS_IN_FLASH
+#undef  CONFIG_ENV_IS_NOWHERE
 
-#ifdef  CFG_ENV_IS_IN_EEPROM
+#ifdef  CONFIG_ENV_IS_IN_EEPROM
 /* Put the environment after the SDRAM configuration */
 #define PROM_SIZE	2048
-#define CFG_ENV_OFFSET	 512
-#define CFG_ENV_SIZE	(PROM_SIZE-CFG_ENV_OFFSET)
+#define CONFIG_ENV_OFFSET	 512
+#define CONFIG_ENV_SIZE	(PROM_SIZE-CONFIG_ENV_OFFSET)
 #endif
 
-#ifdef CFG_ENV_IS_IN_FLASH
+#ifdef CONFIG_ENV_IS_IN_FLASH
 /* Put the environment in Flash */
-#define CFG_ENV_SECT_SIZE	0x10000	/* size of one complete sector	*/
-#define CFG_ENV_ADDR		((-CFG_MONITOR_LEN)-CFG_ENV_SECT_SIZE)
-#define	CFG_ENV_SIZE		8*1024	/* 8 KB Environment Sector	*/
+#define CONFIG_ENV_SECT_SIZE	0x10000	/* size of one complete sector	*/
+#define CONFIG_ENV_ADDR		((-CONFIG_SYS_MONITOR_LEN)-CONFIG_ENV_SECT_SIZE)
+#define	CONFIG_ENV_SIZE		8*1024	/* 8 KB Environment Sector	*/
 
 /* Address and size of Redundant Environment Sector	*/
-#define CFG_ENV_ADDR_REDUND	(CFG_ENV_ADDR-CFG_ENV_SECT_SIZE)
-#define CFG_ENV_SIZE_REDUND	(CFG_ENV_SIZE)
+#define CONFIG_ENV_ADDR_REDUND	(CONFIG_ENV_ADDR-CONFIG_ENV_SECT_SIZE)
+#define CONFIG_ENV_SIZE_REDUND	(CONFIG_ENV_SIZE)
 #endif
 
 /*-----------------------------------------------------------------------
  * I2C stuff for a ATMEL AT24C16 (2kB holding ENV, we are using the
  * the first internal I2C controller of the PPC440EPx
  *----------------------------------------------------------------------*/
-#define CFG_SPD_BUS_NUM		0
-
-#define CONFIG_HARD_I2C		1	/* I2C with hardware support	*/
-#undef	CONFIG_SOFT_I2C			/* I2C bit-banged		*/
-#define CFG_I2C_SPEED		400000	/* I2C speed and slave address	*/
-#define CFG_I2C_SLAVE		0x7F
-
-/* This is the 7bit address of the device, not including P. */
-#define CFG_I2C_EEPROM_ADDR 0x50
-#define CFG_I2C_EEPROM_ADDR_LEN 1
-
-/* The EEPROM can do 16byte ( 1 << 4 ) page writes. */
-#define CFG_I2C_EEPROM_ADDR_OVERFLOW	0x07
-#define CFG_EEPROM_PAGE_WRITE_BITS 4
-#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10
-#define CFG_EEPROM_PAGE_WRITE_ENABLE
-#undef CFG_I2C_MULTI_EEPROMS
-
+#define CONFIG_SYS_SPD_BUS_NUM		0
 
-#define CONFIG_PREBOOT	"echo;"						\
-	"echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;" \
-	"echo"
+#define CONFIG_IPADDR		172.25.1.14
 
-#undef	CONFIG_BOOTARGS
-
-/* Setup some board specific values for the default environment variables */
-#define CONFIG_HOSTNAME		hcu4
-#define CONFIG_IPADDR		172.25.1.99
-#define CONFIG_ETHADDR      00:60:13:00:00:00   /* Netstal Machines AG MAC */
-#define CONFIG_OVERWRITE_ETHADDR_ONCE
-#define CONFIG_SERVERIP		172.25.1.3
-
-#define CFG_TFTP_LOADADDR 0x01000000 /* @16 MB */
-
-#define	CONFIG_EXTRA_ENV_SETTINGS				\
-	"netdev=eth0\0"							\
-	"loadaddr=0x01000000\0"						\
-	"nfsargs=setenv bootargs root=/dev/nfs rw "			\
-		"nfsroot=${serverip}:${rootpath}\0"			\
-	"ramargs=setenv bootargs root=/dev/ram rw\0"			\
-	"addip=setenv bootargs ${bootargs} "				\
-		"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"	\
-		":${hostname}:${netdev}:off panic=1\0"			\
-	"addtty=setenv bootargs ${bootargs} console=ttyS0,${baudrate}\0"\
-	"nfs=tftp 200000 ${bootfile};run nfsargs addip addtty;"		\
-	        "bootm\0"						\
-	"rootpath=/home/diagnose/eldk/ppc_4xx\0"			\
-	"bootfile=/tftpboot/hcu4/uImage\0"				\
-	"load=tftp 100000 hcu4/u-boot.bin\0"				\
-	"update=protect off FFFB0000 FFFFFFFF;era FFFB0000 FFFFFFFF;"	\
-		"cp.b 100000 FFFB0000 50000\0"			        \
-	"upd=run load update\0"						\
-	"vx_rom=hcu4/hcu4_vx_rom\0"					\
-	"vx=tftp ${loadaddr} ${vx_rom};run vxargs; bootvx\0"		\
-	"vxargs=setenv bootargs emac(0,0)c:${vx_rom} e=${ipaddr}"	\
-	" h=${serverip} u=dpu pw=netstal8752 tn=hcu5 f=0x3008\0"	\
+#define	CONFIG_EXTRA_ENV_SETTINGS					\
+	CONFIG_NETSTAL_DEF_ENV						\
+	CONFIG_NETSTAL_DEF_ENV_POWERPC					\
 	""
-#define CONFIG_BOOTCOMMAND	"run vx"
-
-#define CONFIG_BOOTDELAY	5	/* autoboot after 5 seconds	*/
-
-#define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
-#define CFG_LOADS_BAUD_CHANGE	1	/* allow baudrate change	*/
-
-#define CONFIG_MII		1	/* MII PHY management		*/
-#define CONFIG_PHY_ADDR	1	/* PHY address			*/
-
-#define CONFIG_PHY_RESET        1	/* reset phy upon startup */
-
-#define CONFIG_HAS_ETH0
-#define CFG_RX_ETH_BUFFER	16 /* Number of ethernet rx buffers & desC */
 
 /*
  * BOOTP options
@@ -253,95 +183,88 @@
 #define SPD_EEPROM_ADDRESS      0x50
 
 /* POST support */
-#define CONFIG_POST		(CFG_POST_MEMORY   | \
-				 CFG_POST_CPU	   | \
-				 CFG_POST_UART	   | \
-				 CFG_POST_I2C	   | \
-				 CFG_POST_CACHE	   | \
-				 CFG_POST_ETHER	   | \
-				 CFG_POST_SPR)
-
-#define CFG_POST_UART_TABLE	{UART0_BASE}
-#define CFG_POST_WORD_ADDR	(CFG_GBL_DATA_OFFSET - 0x4)
+#define CONFIG_POST		(CONFIG_SYS_POST_MEMORY   | \
+				 CONFIG_SYS_POST_CPU	   | \
+				 CONFIG_SYS_POST_UART	   | \
+				 CONFIG_SYS_POST_I2C	   | \
+				 CONFIG_SYS_POST_CACHE	   | \
+				 CONFIG_SYS_POST_ETHER	   | \
+				 CONFIG_SYS_POST_SPR)
+
+#define CONFIG_SYS_POST_UART_TABLE	{UART0_BASE}
+#define CONFIG_SYS_POST_WORD_ADDR	(CONFIG_SYS_GBL_DATA_OFFSET - 0x4)
 #undef  CONFIG_LOGBUFFER
-#define CFG_POST_CACHE_ADDR	0x00800000 /* free virtual address	*/
-#define CFG_CONSOLE_IS_IN_ENV /* Otherwise it catches logbuffer as output */
+#define CONFIG_SYS_POST_CACHE_ADDR	0x00800000 /* free virtual address	*/
+#define CONFIG_SYS_CONSOLE_IS_IN_ENV /* Otherwise it catches logbuffer as output */
 
 /*-----------------------------------------------------------------------
  * Miscellaneous configurable options
  *----------------------------------------------------------------------*/
-#define CFG_LONGHELP			/* undef to save memory		*/
-#define CFG_PROMPT	"=> "		/* Monitor Command Prompt	*/
+#define CONFIG_SYS_LONGHELP			/* undef to save memory		*/
+#define CONFIG_SYS_PROMPT	"=> "		/* Monitor Command Prompt	*/
 #if defined(CONFIG_CMD_KGDB)
-	#define CFG_CBSIZE	1024		/* Console I/O Buffer Size */
+	#define CONFIG_SYS_CBSIZE	1024		/* Console I/O Buffer Size */
 #else
-	#define CFG_CBSIZE	256		/* Console I/O Buffer Size */
+	#define CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size */
 #endif
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define CFG_MAXARGS	16		/* max number of command args	*/
-#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size	*/
-
-#define CFG_MEMTEST_START	0x0400000	/* memtest works on	*/
-#define CFG_MEMTEST_END		0x0C00000	/* 4 ... 12 MB in DRAM	*/
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS	16		/* max number of command args	*/
+#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
 
+#define CONFIG_SYS_MEMTEST_START	0x0400000	/* memtest works on	*/
+#define CONFIG_SYS_MEMTEST_END		0x0C00000	/* 4 ... 12 MB in DRAM	*/
 
-#define CFG_LOAD_ADDR		0x100000	/* default load address */
-#define CFG_EXTBDINFO		1	/* To use extended board_into (bd_t) */
 
-#define CFG_HZ		1000		/* decrementer freq: 1 ms ticks */
-
-#define CONFIG_CMDLINE_EDITING	1	/* add command line history	*/
-#define CONFIG_LOOPW            1       /* enable loopw command         */
-#define CONFIG_VERSION_VARIABLE 1	/* include version env variable */
+#define CONFIG_SYS_LOAD_ADDR		0x100000	/* default load address */
 
 /*-----------------------------------------------------------------------
  * External Bus Controller (EBC) Setup
  */
 
-#define CFG_EBC_CFG	0x98400000
+#define CONFIG_SYS_EBC_CFG	0x98400000
 
 /* Memory Bank 0 (Flash Bank 0) initialization	*/
-#define CFG_EBC_PB0AP	0x02005400
-#define CFG_EBC_PB0CR	0xFFF18000  /* BAS=0xFFF,BS=1MB,BU=R/W,BW=8bit */
+#define CONFIG_SYS_EBC_PB0AP	0x02005400
+#define CONFIG_SYS_EBC_PB0CR	0xFFF18000  /* BAS=0xFFF,BS=1MB,BU=R/W,BW=8bit */
 
-#define CFG_EBC_PB1AP	0x03041200
-#define CFG_EBC_PB1CR	0x7009A000  /* BAS=,BS=MB,BU=R/W,BW=bit	*/
+#define CONFIG_SYS_EBC_PB1AP	0x03041200
+#define CONFIG_SYS_EBC_PB1CR	0x7009A000  /* BAS=,BS=MB,BU=R/W,BW=bit	*/
 
-#define CFG_EBC_PB2AP	0x02054500
-#define CFG_EBC_PB2CR	0x78018000  /* BAS=,BS=MB,BU=R/W,BW=bit	*/
+#define CONFIG_SYS_EBC_PB2AP	0x02054500
+#define CONFIG_SYS_EBC_PB2CR	0x78018000  /* BAS=,BS=MB,BU=R/W,BW=bit	*/
 
-#define CFG_EBC_PB3AP	0x01840300
-#define CFG_EBC_PB3CR	0x7c0ba000  /* BAS=,BS=MB,BU=R/W,BW=bit	*/
+#define CONFIG_SYS_EBC_PB3AP	0x01840300
+#define CONFIG_SYS_EBC_PB3CR	0x7c0ba000  /* BAS=,BS=MB,BU=R/W,BW=bit	*/
 
-#define CFG_EBC_PB4AP	0x01800300
-#define CFG_EBC_PB4CR	0x7e0ba000  /* BAS=,BS=MB,BU=R/W,BW=bit	*/
+#define CONFIG_SYS_EBC_PB4AP	0x01800300
+#define CONFIG_SYS_EBC_PB4CR	0x7e0ba000  /* BAS=,BS=MB,BU=R/W,BW=bit	*/
 
-#define CFG_GPIO0_OR	0xF27FFFFF  /* GPIO value */
-#define CFG_GPIO0_TCR	0x7FFE0000  /* GPIO value */
-#define CFG_GPIO0_ODR	0x00E897FC  /* GPIO value */
+#define CONFIG_SYS_GPIO0_OR	0xF27FFFFF  /* GPIO value */
+#define CONFIG_SYS_GPIO0_TCR	0x7FFE0000  /* GPIO value */
+#define CONFIG_SYS_GPIO0_ODR	0x00E897FC  /* GPIO value */
 
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define CFG_BOOTMAPSZ		(8 << 20)/* Initial Memory map for Linux */
+#define CONFIG_SYS_BOOTMAPSZ		(8 << 20)/* Initial Memory map for Linux */
 
 /* Init Memory Controller:
  *
  * BR0/1 and OR0/1 (FLASH)
  */
 
-#define FLASH_BASE0_PRELIM	CFG_FLASH_BASE	/* FLASH bank #0	*/
+#define FLASH_BASE0_PRELIM	CONFIG_SYS_FLASH_BASE	/* FLASH bank #0	*/
 #define FLASH_BASE1_PRELIM	0		/* FLASH bank #1	*/
 
 
 /* Configuration Port location */
 #define CONFIG_PORT_ADDR	0xF0000500
 
-#define CFG_HUSH_PARSER                 /* use "hush" command parser    */
-#ifdef  CFG_HUSH_PARSER
-#define CFG_PROMPT_HUSH_PS2	"> "
+#define CONFIG_SYS_HUSH_PARSER                 /* use "hush" command parser    */
+#ifdef  CONFIG_SYS_HUSH_PARSER
+#define CONFIG_SYS_PROMPT_HUSH_PS2	"> "
 #endif
 
 #if defined(CONFIG_CMD_KGDB)
@@ -349,8 +272,4 @@
 #define CONFIG_KGDB_SER_INDEX	2	    /* which serial port to use */
 #endif
 
-/* pass open firmware flat tree */
-#define CONFIG_OF_LIBFDT	1
-#define CONFIG_OF_BOARD_SETUP	1
-
 #endif	/* __CONFIG_H */
diff --git a/include/configs/hcu5.h b/include/configs/hcu5.h
index 54d672114..26d2d0c9d 100644
--- a/include/configs/hcu5.h
+++ b/include/configs/hcu5.h
@@ -1,5 +1,5 @@
 /*
- * (C) Copyright 2007 Netstal Maschinen AG
+ * (C) Copyright 2007-2008 Netstal Maschinen AG
  * Niklaus Giger (Niklaus.Giger@netstal.com)
  *
  * (C) Copyright 2006-2007
@@ -39,8 +39,14 @@
 #define CONFIG_440EPX		1		/* Specific PPC440EPx	*/
 #define CONFIG_440		1		/* ... PPC440 family	*/
 #define CONFIG_4xx		1		/* ... PPC4xx family	*/
-#define CONFIG_SYS_CLK_FREQ	33333333	/* external freq to pll	*/
+#define CONFIG_HOSTNAME		hcu5
+
+/*
+ * Include common defines/options for all boards produced by Netstal Maschinen
+ */
+#include "netstal-common.h"
 
+#define CONFIG_SYS_CLK_FREQ	33333333	/* external freq to pll	*/
 #define CONFIG_BOARD_EARLY_INIT_F 1		/* Call board_early_init_f */
 #define CONFIG_MISC_INIT_R	1		/* Call misc_init_r	*/
 
@@ -48,94 +54,82 @@
  * Base addresses -- Note these are effective addresses where the
  * actual resources get mapped (not physical addresses)
  *----------------------------------------------------------------------*/
-#define CFG_MONITOR_LEN	(320 * 1024)	/* Reserve 320 kB for Monitor	*/
-#define CFG_MALLOC_LEN		(256 * 1024) /* Reserve 256 kB for malloc() */
-
-#define CFG_TLB_FOR_BOOT_FLASH  3
-#define CFG_BOOT_BASE_ADDR	0xfff00000
-#define CFG_SDRAM_BASE		0x00000000	/* _must_ be 0		*/
-#define CFG_FLASH_BASE		0xfff80000	/* start of FLASH	*/
-#define CFG_MONITOR_BASE	TEXT_BASE
-#define CFG_OCM_BASE		0xe0010000      /* ocm			*/
-#define CFG_OCM_DATA_ADDR	CFG_OCM_BASE
-#define CFG_PCI_BASE		0xe0000000      /* Internal PCI regs	*/
-#define CFG_PCI_MEMBASE		0x80000000	/* mapped pci memory	*/
-#define CFG_PCI_MEMBASE1	CFG_PCI_MEMBASE  + 0x10000000
-#define CFG_PCI_MEMBASE2	CFG_PCI_MEMBASE1 + 0x10000000
-#define CFG_PCI_MEMBASE3	CFG_PCI_MEMBASE2 + 0x10000000
+#define CONFIG_SYS_MONITOR_LEN	(320 * 1024)	/* Reserve 320 kB for Monitor	*/
+#define CONFIG_SYS_MALLOC_LEN		(256 * 1024) /* Reserve 256 kB for malloc() */
+
+#define CONFIG_SYS_TLB_FOR_BOOT_FLASH  3
+#define CONFIG_SYS_BOOT_BASE_ADDR	0xfff00000
+#define CONFIG_SYS_SDRAM_BASE		0x00000000	/* _must_ be 0		*/
+#define CONFIG_SYS_FLASH_BASE		0xfff80000	/* start of FLASH	*/
+#define CONFIG_SYS_MONITOR_BASE	TEXT_BASE
+#define CONFIG_SYS_OCM_BASE		0xe0010000      /* ocm			*/
+#define CONFIG_SYS_OCM_DATA_ADDR	CONFIG_SYS_OCM_BASE
+#define CONFIG_SYS_PCI_BASE		0xe0000000      /* Internal PCI regs	*/
+#define CONFIG_SYS_PCI_MEMBASE		0x80000000	/* mapped pci memory	*/
+#define CONFIG_SYS_PCI_MEMBASE1	CONFIG_SYS_PCI_MEMBASE  + 0x10000000
+#define CONFIG_SYS_PCI_MEMBASE2	CONFIG_SYS_PCI_MEMBASE1 + 0x10000000
+#define CONFIG_SYS_PCI_MEMBASE3	CONFIG_SYS_PCI_MEMBASE2 + 0x10000000
 
 /* Don't change either of these */
-#define CFG_PERIPHERAL_BASE	0xef600000	/* internal peripherals	*/
+#define CONFIG_SYS_PERIPHERAL_BASE	0xef600000	/* internal peripherals	*/
 
-#define CFG_USB2D0_BASE		0xe0000100
-#define CFG_USB_DEVICE		0xe0000000
-#define CFG_USB_HOST		0xe0000400
+#define CONFIG_SYS_USB2D0_BASE		0xe0000100
+#define CONFIG_SYS_USB_DEVICE		0xe0000000
+#define CONFIG_SYS_USB_HOST		0xe0000400
 
 /*-----------------------------------------------------------------------
  * Initial RAM & stack pointer
  *----------------------------------------------------------------------*/
 /* 440EPx/440GRx have 16KB of internal SRAM, so no need for D-Cache	*/
-#define CFG_INIT_RAM_ADDR	CFG_OCM_BASE	/* OCM			*/
+#define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_OCM_BASE	/* OCM			*/
 
-#define CFG_INIT_RAM_END	(4 << 10)
-#define CFG_GBL_DATA_SIZE	256		/* num bytes initial data */
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP_OFFSET	CFG_POST_WORD_ADDR
+#define CONFIG_SYS_INIT_RAM_END	(4 << 10)
+#define CONFIG_SYS_GBL_DATA_SIZE	256		/* num bytes initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_POST_WORD_ADDR
 
 /*-----------------------------------------------------------------------
  * Serial Port
  *----------------------------------------------------------------------*/
-#undef CFG_EXT_SERIAL_CLOCK	       /* external serial clock */
-#define CONFIG_BAUDRATE		9600
-#define CONFIG_SERIAL_MULTI     1
-/* needed to be able to define
-	CONFIG_SERIAL_SOFTWARE_FIFO, but
-	CONFIG_SERIAL_SOFTWARE_FIFO (16) does not work */
-/* Size (bytes) of interrupt driven serial port buffer.
- * Set to 0 to use polling instead of interrupts.
- * Setting to 0 will also disable RTS/CTS handshaking.
- */
+#undef CONFIG_SYS_EXT_SERIAL_CLOCK	       /* external serial clock */
+#define CONFIG_BAUDRATE		115200
 #undef CONFIG_SERIAL_SOFTWARE_FIFO
 #undef CONFIG_UART1_CONSOLE
 
-#undef CONFIG_CMD_HWFLOW
-#define CFG_BAUDRATE_TABLE						\
-	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
-
 /*-----------------------------------------------------------------------
  * Environment
  *----------------------------------------------------------------------*/
 
-#undef	CFG_ENV_IS_IN_NVRAM
-#define  CFG_ENV_IS_IN_FLASH
-#undef	CFG_ENV_IS_IN_EEPROM
-#undef  CFG_ENV_IS_NOWHERE
+#undef	CONFIG_ENV_IS_IN_NVRAM
+#define  CONFIG_ENV_IS_IN_FLASH
+#undef	CONFIG_ENV_IS_IN_EEPROM
+#undef  CONFIG_ENV_IS_NOWHERE
 
-#ifdef  CFG_ENV_IS_IN_EEPROM
+#ifdef  CONFIG_ENV_IS_IN_EEPROM
 /* Put the environment after the SDRAM and bootstrap configuration */
 #define PROM_SIZE	2048
-#define CFG_BOOSTRAP_OPTION_OFFSET	 512
-#define CFG_ENV_OFFSET	 (CFG_BOOSTRAP_OPTION_OFFSET + 0x10)
-#define CFG_ENV_SIZE	(PROM_SIZE-CFG_ENV_OFFSET)
+#define CONFIG_SYS_BOOSTRAP_OPTION_OFFSET	 512
+#define CONFIG_ENV_OFFSET	 (CONFIG_SYS_BOOSTRAP_OPTION_OFFSET + 0x10)
+#define CONFIG_ENV_SIZE	(PROM_SIZE-CONFIG_ENV_OFFSET)
 #endif
 
-#ifdef CFG_ENV_IS_IN_FLASH
+#ifdef CONFIG_ENV_IS_IN_FLASH
 /* Put the environment in Flash */
-#define CFG_ENV_SECT_SIZE	0x10000 /* size of one complete sector	*/
-#define CFG_ENV_ADDR		((-CFG_MONITOR_LEN)-CFG_ENV_SECT_SIZE)
-#define CFG_ENV_SIZE		8*1024	/* 8 KB Environment Sector	*/
+#define CONFIG_ENV_SECT_SIZE	0x10000 /* size of one complete sector	*/
+#define CONFIG_ENV_ADDR		((-CONFIG_SYS_MONITOR_LEN)-CONFIG_ENV_SECT_SIZE)
+#define CONFIG_ENV_SIZE		8*1024	/* 8 KB Environment Sector	*/
 
 /* Address and size of Redundant Environment Sector	*/
-#define CFG_ENV_ADDR_REDUND	(CFG_ENV_ADDR-CFG_ENV_SECT_SIZE)
-#define CFG_ENV_SIZE_REDUND	(CFG_ENV_SIZE)
+#define CONFIG_ENV_ADDR_REDUND	(CONFIG_ENV_ADDR-CONFIG_ENV_SECT_SIZE)
+#define CONFIG_ENV_SIZE_REDUND	(CONFIG_ENV_SIZE)
 
 #endif
 
 /*-----------------------------------------------------------------------
  * DDR SDRAM
  *----------------------------------------------------------------------*/
-#define CFG_MBYTES_SDRAM        (128)		/* 128 MB or 256 MB	*/
-#define CFG_DDR_CACHED_ADDR	0x50000000	/* setup 2nd TLB cached here */
+#define CONFIG_SYS_MBYTES_SDRAM        (128)		/* 128 MB or 256 MB	*/
+#define CONFIG_SYS_DDR_CACHED_ADDR	0x50000000	/* setup 2nd TLB cached here */
 #undef  CONFIG_DDR_DATA_EYE		/* Do not use DDR2 optimization	*/
 #define CONFIG_DDR_ECC		1	/* enable ECC			*/
 
@@ -144,94 +138,26 @@
 #define PM_RESERVED_MEM       (  64)  /* in kB: pmLib reserved area size */
 #define CONFIG_PRAM           ( USER_RESERVED_MEM + PM_RESERVED_MEM )
 
+#define CONFIG_SYS_MEM_TOP_HIDE	(4 << 10) /* don't use last 4kbytes	*/
+					/* 440EPx errata CHIP 11	*/
+
 /*-----------------------------------------------------------------------
  * I2C stuff for a ATMEL AT24C16 (2kB holding ENV, we are using the
  * the second internal I2C controller of the PPC440EPx
  *----------------------------------------------------------------------*/
-#define CFG_SPD_BUS_NUM	1
-
-#define CONFIG_HARD_I2C	1	/* I2C with hardware support	*/
-#undef	CONFIG_SOFT_I2C			/* I2C bit-banged		*/
-#define CFG_I2C_SPEED		400000	/* I2C speed and slave address	*/
-#define CFG_I2C_SLAVE		0x7F
-
-/* This is the 7bit address of the device, not including P. */
-#define CFG_I2C_EEPROM_ADDR 0x50
-#define CFG_I2C_EEPROM_ADDR_LEN 1
-
-/* The EEPROM can do 16byte ( 1 << 4 ) page writes. */
-#define CFG_I2C_EEPROM_ADDR_OVERFLOW	0x07
-#define CFG_EEPROM_PAGE_WRITE_BITS 4
-#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10
-#define CFG_EEPROM_PAGE_WRITE_ENABLE
-#undef CFG_I2C_MULTI_EEPROMS
-
-
-#define CONFIG_PREBOOT	"echo;"						\
-	"echo Type \"run nfs\" to mount Linux root filesystem over NFS;"\
-	"echo"
-
-#undef	CONFIG_BOOTARGS
+#define CONFIG_SYS_SPD_BUS_NUM	1
 
 /* Setup some board specific values for the default environment variables */
-#define CONFIG_HOSTNAME		hcu5
-#define CONFIG_IPADDR		172.25.1.99
-#define CONFIG_ETHADDR	00:60:13:00:00:00 /* Netstal Machines AG MAC */
-#define CONFIG_OVERWRITE_ETHADDR_ONCE
-#define CONFIG_SERVERIP		172.25.1.3
-
-#define CFG_TFTP_LOADADDR 0x01000000 /* @16 MB */
+#define CONFIG_IPADDR		172.25.1.15
 
 #define	CONFIG_EXTRA_ENV_SETTINGS					\
-	"netdev=eth0\0"							\
-	"loadaddr=0x01000000\0"						\
-	"nfsargs=setenv bootargs root=/dev/nfs rw "			\
-		"nfsroot=${serverip}:${rootpath}\0"			\
-	"ramargs=setenv bootargs root=/dev/ram rw\0"			\
-	"addip=setenv bootargs ${bootargs} "				\
-		"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"	\
-		":${hostname}:${netdev}:off panic=1\0"			\
-	"addtty=setenv bootargs ${bootargs} console=ttyS0,${baudrate}\0"\
-	"nfs=tftp 200000 ${bootfile};run nfsargs addip addtty;"		\
-		"bootm\0"						\
-		"bootfile=hcu5/uImage\0"				\
-		"rootpath=/home/hcu/eldk/ppc_4xxFP\0"			\
-		"load=tftp 100000 hcu5/u-boot.bin\0"			\
-	"update=protect off FFFB0000 FFFFFFFF;era FFFB0000 FFFFFFFF;"	\
-		"cp.b 100000 FFFB0000 50000\0"			        \
-	"upd=run load update\0"						\
-	"vx_rom=hcu5/hcu5_vx_rom\0"					\
-	"vx=tftp ${loadaddr} ${vx_rom};run vxargs; bootvx\0"		\
-	"vxargs=setenv bootargs emac(0,0)c:${vx_rom} e=${ipaddr}"	\
-	" h=${serverip} u=dpu pw=netstal8752 tn=hcu5 f=0x3008\0"	\
-	"usbargs=setenv bootargs root=/dev/sda1 ro\0"			\
-	"linux=usb start; ext2load usb 0 ${loadaddr} /boot/uImage;"     \
-	"run usbargs addip addtty; bootm\0"				\
-	"net_nfs_fdt=tftp 200000 ${bootfile};"				\
-		"tftp ${fdt_addr} ${fdt_file};"				\
-		"run nfsargs addip addtty;"				\
-		"bootm 200000 - ${fdt_addr}\0"				\
-		"fdt_file=hcu5/hcu5.dtb\0"				\
-	"fdt_addr=400000\0"						\
+	CONFIG_NETSTAL_DEF_ENV						\
+	CONFIG_NETSTAL_DEF_ENV_POWERPC					\
 	""
-#define CONFIG_BOOTCOMMAND	"run vx"
-
-#define CONFIG_BOOTDELAY	5	/* autoboot after 5 seconds	*/
-
-#define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
-#define CFG_LOADS_BAUD_CHANGE	1	/* allow baudrate change	*/
 
 #define CONFIG_M88E1111_PHY	1
 #define	CONFIG_IBM_EMAC4_V4	1
-#define CONFIG_MII		1	/* MII PHY management		*/
-#define CONFIG_PHY_ADDR	1	/* PHY address, like on HCU4	*/
-
-#define CONFIG_PHY_RESET       1	/* reset phy upon startup         */
-
-#define CONFIG_HAS_ETH0
-#define CFG_RX_ETH_BUFFER	32 /* Number of ethernet rx buffers & desc. */
 
-#define CONFIG_NET_MULTI	1
 #define CONFIG_HAS_ETH1	1	/* add support for "eth1addr" */
 #define CONFIG_PHY1_ADDR	2
 
@@ -279,48 +205,39 @@
 #define CONFIG_CMD_USB
 
 /* POST support */
-#define CONFIG_POST		(CFG_POST_MEMORY   | \
-				 CFG_POST_CPU	   | \
-				 CFG_POST_UART	   | \
-				 CFG_POST_I2C	   | \
-				 CFG_POST_CACHE	   | \
-				 CFG_POST_FPU	   | \
-				 CFG_POST_ETHER	   | \
-				 CFG_POST_SPR)
-#define CFG_POST_UART_TABLE	{UART0_BASE}
-
-#define CFG_POST_WORD_ADDR	(CFG_GBL_DATA_OFFSET - 0x4)
-#define CFG_POST_CACHE_ADDR	0x7fff0000 /* free virtual address	*/
-#define CFG_CONSOLE_IS_IN_ENV /* Otherwise it catches logbuffer as output */
+#define CONFIG_POST		(CONFIG_SYS_POST_MEMORY   | \
+				 CONFIG_SYS_POST_UART	   | \
+				 CONFIG_SYS_POST_I2C	   | \
+				 CONFIG_SYS_POST_CACHE	   | \
+				 CONFIG_SYS_POST_FPU	   | \
+				 CONFIG_SYS_POST_ETHER	   | \
+				 CONFIG_SYS_POST_SPR)
+#define CONFIG_SYS_POST_UART_TABLE	{UART0_BASE}
+
+#define CONFIG_SYS_POST_WORD_ADDR	(CONFIG_SYS_GBL_DATA_OFFSET - 0x4)
+#define CONFIG_SYS_POST_CACHE_ADDR	0x7fff0000 /* free virtual address	*/
+#define CONFIG_SYS_CONSOLE_IS_IN_ENV /* Otherwise it catches logbuffer as output */
 
 #define CONFIG_SUPPORT_VFAT
 
 /*-----------------------------------------------------------------------
  * Miscellaneous configurable options
  *----------------------------------------------------------------------*/
-#define CFG_LONGHELP			/* undef to save memory		*/
-#define CFG_PROMPT	        "=> "	/* Monitor Command Prompt	*/
+#define CONFIG_SYS_LONGHELP			/* undef to save memory		*/
+#define CONFIG_SYS_PROMPT	        "=> "	/* Monitor Command Prompt	*/
 #if defined(CONFIG_CMD_KGDB)
-#define CFG_CBSIZE	        1024	/* Console I/O Buffer Size	*/
+#define CONFIG_SYS_CBSIZE	        1024	/* Console I/O Buffer Size	*/
 #else
-#define CFG_CBSIZE	        256	/* Console I/O Buffer Size	*/
+#define CONFIG_SYS_CBSIZE	        256	/* Console I/O Buffer Size	*/
 #endif
-#define CFG_PBSIZE              (CFG_CBSIZE+sizeof(CFG_PROMPT)+16)
-#define CFG_MAXARGS	        16	/* max number of command args	*/
-#define CFG_BARGSIZE	        CFG_CBSIZE /* Boot Argument Buffer Size	*/
+#define CONFIG_SYS_PBSIZE              (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
+#define CONFIG_SYS_MAXARGS	        16	/* max number of command args	*/
+#define CONFIG_SYS_BARGSIZE	        CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size	*/
 
-#define CFG_MEMTEST_START	0x0400000 /* memtest works on		*/
-#define CFG_MEMTEST_END	0x0C00000 /* 4 ... 12 MB in DRAM	*/
+#define CONFIG_SYS_MEMTEST_START	0x0400000 /* memtest works on		*/
+#define CONFIG_SYS_MEMTEST_END		0x0C00000 /* 4 ... 12 MB in DRAM	*/
 
-#define CFG_LOAD_ADDR		0x100000  /* default load address	*/
-#define CFG_EXTBDINFO		1	/* To use extended board_into (bd_t) */
-
-#define CFG_HZ		        1000	/* decrementer freq: 1 ms ticks	*/
-
-#define CONFIG_CMDLINE_EDITING	1	/* add command line history	*/
-#define CONFIG_LOOPW            1       /* enable loopw command         */
-#define CONFIG_MX_CYCLIC        1       /* enable mdc/mwc commands      */
-#define CONFIG_VERSION_VARIABLE 1	/* include version env variable */
+#define CONFIG_SYS_LOAD_ADDR		0x100000  /* default load address	*/
 
 /*-----------------------------------------------------------------------
  * PCI stuff
@@ -329,80 +246,80 @@
 #define CONFIG_PCI		1	/* include pci support	        */
 #undef CONFIG_PCI_PNP			/* do (not) pci plug-and-play   */
 #undef CONFIG_PCI_SCAN_SHOW		/* show pci devices on startup  */
-#define CFG_PCI_TARGBASE        0x80000000 /* PCIaddr map to CFG_PCI_MEMBASE*/
+#define CONFIG_SYS_PCI_TARGBASE        0x80000000 /* PCIaddr map to CONFIG_SYS_PCI_MEMBASE*/
 
 /* Board-specific PCI */
-#define CFG_PCI_TARGET_INIT
-#define CFG_PCI_MASTER_INIT
+#define CONFIG_SYS_PCI_TARGET_INIT
+#define CONFIG_SYS_PCI_MASTER_INIT
 
-#define CFG_PCI_SUBSYS_VENDORID 0x10e8	/* AMCC				*/
-#define CFG_PCI_SUBSYS_ID       0xcafe	/* Whatever			*/
+#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x10e8	/* AMCC				*/
+#define CONFIG_SYS_PCI_SUBSYS_ID       0xcafe	/* Whatever			*/
 
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define CFG_BOOTMAPSZ		(8 << 20) /* Initial Memory map for Linux */
+#define CONFIG_SYS_BOOTMAPSZ		(8 << 20) /* Initial Memory map for Linux */
 
 /*-----------------------------------------------------------------------
  * Flash
  *----------------------------------------------------------------------*/
 
 /* Use common CFI driver */
-#define CFG_FLASH_CFI
+#define CONFIG_SYS_FLASH_CFI
 #define CONFIG_FLASH_CFI_DRIVER
 /* board provides its own flash_init code */
 #define CONFIG_FLASH_CFI_LEGACY		1
-#define CFG_FLASH_CFI_WIDTH		FLASH_CFI_8BIT
-#define CFG_FLASH_LEGACY_512Kx8 1
+#define CONFIG_SYS_FLASH_CFI_WIDTH		FLASH_CFI_8BIT
+#define CONFIG_SYS_FLASH_LEGACY_512Kx8 1
 
 /* print 'E' for empty sector on flinfo */
-#define CFG_FLASH_EMPTY_INFO
+#define CONFIG_SYS_FLASH_EMPTY_INFO
 
-#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks */
-#define CFG_MAX_FLASH_SECT	8	/* max number of sectors on one chip */
+#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks */
+#define CONFIG_SYS_MAX_FLASH_SECT	8	/* max number of sectors on one chip */
 
 /*-----------------------------------------------------------------------
  * External Bus Controller (EBC) Setup
  *----------------------------------------------------------------------*/
-#define CFG_FLASH		CFG_FLASH_BASE
-#define CFG_CS_1		0xC8000000 /* CAN */
-#define CFG_CS_2		0xCC000000 /* CPLD and IMC-Bus Standard */
-#define CFG_CPLD		CFG_CS_2
-#define CFG_CS_3		0xCE000000 /* CPLD and IMC-Bus Fast  */
+#define CONFIG_SYS_FLASH		CONFIG_SYS_FLASH_BASE
+#define CONFIG_SYS_CS_1		0xC8000000 /* CAN */
+#define CONFIG_SYS_CS_2		0xCC000000 /* CPLD and IMC-Bus Standard */
+#define CONFIG_SYS_CPLD		CONFIG_SYS_CS_2
+#define CONFIG_SYS_CS_3		0xCE000000 /* CPLD and IMC-Bus Fast  */
 
-#define CFG_BOOTFLASH_CS	0	/* Boot Flash chip connected to CSx */
-#define CFG_EBC_PB0AP		0x02005400
-#define CFG_EBC_PB0CR		0xFFF18000 /* (CFG_FLASH | 0xda000)  */
-#define FLASH_BASE0_PRELIM	CFG_FLASH_BASE	/* FLASH bank #0	*/
+#define CONFIG_SYS_BOOTFLASH_CS	0	/* Boot Flash chip connected to CSx */
+#define CONFIG_SYS_EBC_PB0AP		0x02005400
+#define CONFIG_SYS_EBC_PB0CR		0xFFF18000 /* (CONFIG_SYS_FLASH | 0xda000)  */
+#define FLASH_BASE0_PRELIM	CONFIG_SYS_FLASH_BASE	/* FLASH bank #0	*/
 
 /* Memory Bank 1 CAN-Chips initialization				*/
-#define CFG_EBC_PB1AP		0x02054500
-#define CFG_EBC_PB1CR		0xC8018000
+#define CONFIG_SYS_EBC_PB1AP		0x02054500
+#define CONFIG_SYS_EBC_PB1CR		0xC8018000
 
 /* Memory Bank 2 CPLD/IMC-Bus standard initialization			*/
-#define CFG_EBC_PB2AP		0x01840300
-#define CFG_EBC_PB2CR		0xCC0BA000
+#define CONFIG_SYS_EBC_PB2AP		0x01840300
+#define CONFIG_SYS_EBC_PB2CR		0xCC0BA000
 
 /* Memory Bank 3 IMC-Bus fast mode initialization			*/
-#define CFG_EBC_PB3AP		0x01800300
-#define CFG_EBC_PB3CR		0xCE0BA000
+#define CONFIG_SYS_EBC_PB3AP		0x01800300
+#define CONFIG_SYS_EBC_PB3CR		0xCE0BA000
 
 /* Memory Bank 4 (not used) initialization				*/
-#undef CFG_EBC_PB4AP
-#undef CFG_EBC_PB4CR
+#undef CONFIG_SYS_EBC_PB4AP
+#undef CONFIG_SYS_EBC_PB4CR
 
 /* Memory Bank 5 (not used) initialization				*/
-#undef CFG_EBC_PB5AP
-#undef CFG_EBC_PB5CR
+#undef CONFIG_SYS_EBC_PB5AP
+#undef CONFIG_SYS_EBC_PB5CR
 
-#define HCU_CPLD_VERSION_REGISTER ( CFG_CPLD + 0x0F00000 )
-#define HCU_HW_VERSION_REGISTER   ( CFG_CPLD + 0x1400000 )
+#define HCU_CPLD_VERSION_REGISTER ( CONFIG_SYS_CPLD + 0x0F00000 )
+#define HCU_HW_VERSION_REGISTER   ( CONFIG_SYS_CPLD + 0x1400000 )
 
-#define CFG_HUSH_PARSER                 /* use "hush" command parser    */
-#ifdef  CFG_HUSH_PARSER
-	#define CFG_PROMPT_HUSH_PS2     "> "
+#define CONFIG_SYS_HUSH_PARSER                 /* use "hush" command parser    */
+#ifdef  CONFIG_SYS_HUSH_PARSER
+	#define CONFIG_SYS_PROMPT_HUSH_PS2     "> "
 #endif
 
 #if defined(CONFIG_CMD_KGDB)
@@ -410,8 +327,4 @@
 #define CONFIG_KGDB_SER_INDEX	2	    /* which serial port to use */
 #endif
 
-/* pass open firmware flat tree */
-#define CONFIG_OF_LIBFDT	1
-#define CONFIG_OF_BOARD_SETUP	1
-
 #endif	/* __CONFIG_H */
diff --git a/include/configs/hermes.h b/include/configs/hermes.h
index 48b23bdcd..0df46fa4d 100644
--- a/include/configs/hermes.h
+++ b/include/configs/hermes.h
@@ -60,7 +60,7 @@
 	"bootm"
 
 #define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
-#undef	CFG_LOADS_BAUD_CHANGE		/* don't allow baudrate change	*/
+#undef	CONFIG_SYS_LOADS_BAUD_CHANGE		/* don't allow baudrate change	*/
 
 #undef	CONFIG_WATCHDOG			/* watchdog disabled		*/
 
@@ -83,29 +83,29 @@
 /*
  * Miscellaneous configurable options
  */
-#define	CFG_LONGHELP			/* undef to save memory		*/
-#define	CFG_PROMPT	"=> "		/* Monitor Command Prompt	*/
+#define	CONFIG_SYS_LONGHELP			/* undef to save memory		*/
+#define	CONFIG_SYS_PROMPT	"=> "		/* Monitor Command Prompt	*/
 #if defined(CONFIG_CMD_KGDB)
-#define	CFG_CBSIZE	1024		/* Console I/O Buffer Size	*/
+#define	CONFIG_SYS_CBSIZE	1024		/* Console I/O Buffer Size	*/
 #else
-#define	CFG_CBSIZE	256		/* Console I/O Buffer Size	*/
+#define	CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size	*/
 #endif
-#define	CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define	CFG_MAXARGS	16		/* max number of command args	*/
-#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+#define	CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define	CONFIG_SYS_MAXARGS	16		/* max number of command args	*/
+#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
 
-#define CFG_MEMTEST_START	0x00100000	/* memtest works on	*/
-#define CFG_MEMTEST_END		0x00F00000	/* 1 ... 15MB in DRAM	*/
+#define CONFIG_SYS_MEMTEST_START	0x00100000	/* memtest works on	*/
+#define CONFIG_SYS_MEMTEST_END		0x00F00000	/* 1 ... 15MB in DRAM	*/
 
-#define	CFG_LOAD_ADDR		0x00100000	/* default load address	*/
+#define	CONFIG_SYS_LOAD_ADDR		0x00100000	/* default load address	*/
 
-#define	CFG_PIO_MODE		0	/* IDE interface in PIO Mode 0	*/
+#define	CONFIG_SYS_PIO_MODE		0	/* IDE interface in PIO Mode 0	*/
 
-#define	CFG_HZ			1000	/* decrementer freq: 1 ms ticks	*/
+#define	CONFIG_SYS_HZ			1000	/* decrementer freq: 1 ms ticks	*/
 
-#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
 
-#define	CFG_ALLOC_DPRAM		1	/* use allocation routines	*/
+#define	CONFIG_SYS_ALLOC_DPRAM		1	/* use allocation routines	*/
 /*
  * Low Level Configuration Settings
  * (address mappings, register initial values, etc.)
@@ -114,56 +114,56 @@
 /*-----------------------------------------------------------------------
  * Internal Memory Mapped Register
  */
-#define CFG_IMMR		0xFF000000	/* Non-Standard value!	*/
+#define CONFIG_SYS_IMMR		0xFF000000	/* Non-Standard value!	*/
 
 /*-----------------------------------------------------------------------
  * Definitions for initial stack pointer and data area (in DPRAM)
  */
-#define CFG_INIT_RAM_ADDR	CFG_IMMR
-#define	CFG_INIT_RAM_END	0x2F00	/* End of used area in DPRAM	*/
-#define	CFG_GBL_DATA_SIZE	64  /* size in bytes reserved for initial data */
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define	CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_IMMR
+#define	CONFIG_SYS_INIT_RAM_END	0x2F00	/* End of used area in DPRAM	*/
+#define	CONFIG_SYS_GBL_DATA_SIZE	64  /* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define	CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
 /*-----------------------------------------------------------------------
  * Start addresses for the final memory configuration
  * (Set up by the startup code)
- * Please note that CFG_SDRAM_BASE _must_ start at 0
+ * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
  */
-#define	CFG_SDRAM_BASE		0x00000000
-#define CFG_FLASH_BASE		0xFE000000
+#define	CONFIG_SYS_SDRAM_BASE		0x00000000
+#define CONFIG_SYS_FLASH_BASE		0xFE000000
 #ifdef	DEBUG
-#define	CFG_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor	*/
+#define	CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor	*/
 #else
-#define	CFG_MONITOR_LEN		(128 << 10)	/* Reserve 128 kB for Monitor	*/
+#define	CONFIG_SYS_MONITOR_LEN		(128 << 10)	/* Reserve 128 kB for Monitor	*/
 #endif
-#define CFG_MONITOR_BASE	CFG_FLASH_BASE
-#define	CFG_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/
+#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_FLASH_BASE
+#define	CONFIG_SYS_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/
 
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define	CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux	*/
+#define	CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux	*/
 /*-----------------------------------------------------------------------
  * FLASH organization
  */
-#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
-#define CFG_MAX_FLASH_SECT	124	/* max number of sectors on one chip	*/
+#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
+#define CONFIG_SYS_MAX_FLASH_SECT	124	/* max number of sectors on one chip	*/
 
-#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
-#define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
+#define CONFIG_SYS_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
+#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
 
-#define	CFG_ENV_IS_IN_FLASH	1
-#define	CFG_ENV_OFFSET		0x4000	/*   Offset   of Environment Sector	*/
-#define	CFG_ENV_SIZE		0x2000	/* Total Size of Environment Sector	*/
+#define	CONFIG_ENV_IS_IN_FLASH	1
+#define	CONFIG_ENV_OFFSET		0x4000	/*   Offset   of Environment Sector	*/
+#define	CONFIG_ENV_SIZE		0x2000	/* Total Size of Environment Sector	*/
 /*-----------------------------------------------------------------------
  * Cache Configuration
  */
-#define CFG_CACHELINE_SIZE	16	/* For all MPC8xx CPUs			*/
+#define CONFIG_SYS_CACHELINE_SIZE	16	/* For all MPC8xx CPUs			*/
 #if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT	4	/* log base 2 of the above value	*/
+#define CONFIG_SYS_CACHELINE_SHIFT	4	/* log base 2 of the above value	*/
 #endif
 
 /*-----------------------------------------------------------------------
@@ -174,10 +174,10 @@
  * +0x0004
  */
 #if defined(CONFIG_WATCHDOG)
-#define CFG_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
+#define CONFIG_SYS_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
 			 SYPCR_SWE  | SYPCR_SWRI| SYPCR_SWP)
 #else
-#define CFG_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
+#define CONFIG_SYS_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
 #endif
 
 /*-----------------------------------------------------------------------
@@ -185,7 +185,7 @@
  *-----------------------------------------------------------------------
  * +0x0000 => 0x000000C0
  */
-#define CFG_SIUMCR	0
+#define CONFIG_SYS_SIUMCR	0
 
 /*-----------------------------------------------------------------------
  * TBSCR - Time Base Status and Control				11-26
@@ -193,7 +193,7 @@
  * Clear Reference Interrupt Status, Timebase freezing enabled
  * +0x0200 => 0x00C2
  */
-#define CFG_TBSCR	(TBSCR_REFA | TBSCR_REFB | TBSCR_TBF)
+#define CONFIG_SYS_TBSCR	(TBSCR_REFA | TBSCR_REFB | TBSCR_TBF)
 
 /*-----------------------------------------------------------------------
  * PISCR - Periodic Interrupt Status and Control		11-31
@@ -201,7 +201,7 @@
  * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
  * +0x0240 => 0x0082
  */
-#define CFG_PISCR	(PISCR_PS | PISCR_PITF)
+#define CONFIG_SYS_PISCR	(PISCR_PS | PISCR_PITF)
 
 /*-----------------------------------------------------------------------
  * PLPRCR - PLL, Low-Power, and Reset Control Register		15-30
@@ -210,7 +210,7 @@
  * interrupt status bit, set PLL multiplication factor !
  */
 /* +0x0286 => 0x00B0D0C0 */
-#define CFG_PLPRCR							\
+#define CONFIG_SYS_PLPRCR							\
 		(	(11 << PLPRCR_MF_SHIFT) |			\
 			PLPRCR_SPLSS | PLPRCR_TEXPS | PLPRCR_TMIST |	\
 			/*PLPRCR_CSRC|*/ PLPRCR_LPM_NORMAL |		\
@@ -225,7 +225,7 @@
  */
 #define SCCR_MASK	SCCR_EBDF11
 /* +0x0282 => 0x03800000 */
-#define CFG_SCCR	(SCCR_COM00	|   SCCR_TBS	  |	\
+#define CONFIG_SYS_SCCR	(SCCR_COM00	|   SCCR_TBS	  |	\
 			 SCCR_RTDIV	|   SCCR_RTSEL	  |	\
 			 /*SCCR_CRQEN|*/  /*SCCR_PRQEN|*/	\
 			 SCCR_EBDF00	|   SCCR_DFSYNC00 |	\
@@ -237,7 +237,7 @@
  *-----------------------------------------------------------------------
  */
 /* +0x0220 => 0x00C3 */
-#define CFG_RTCSC	(RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE)
+#define CONFIG_SYS_RTCSC	(RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE)
 
 
 /*-----------------------------------------------------------------------
@@ -245,20 +245,20 @@
  *-----------------------------------------------------------------------
  */
 /* +0x09C4 => TIMEP=1 */
-#define CFG_RCCR 0x0100
+#define CONFIG_SYS_RCCR 0x0100
 
 /*-----------------------------------------------------------------------
  * RMDS - RISC Microcode Development Support Control Register
  *-----------------------------------------------------------------------
  */
-#define CFG_RMDS 0
+#define CONFIG_SYS_RMDS 0
 
 /*-----------------------------------------------------------------------
  *
  *-----------------------------------------------------------------------
  *
  */
-#define CFG_DER	0
+#define CONFIG_SYS_DER	0
 
 /*
  * Init Memory Controller:
@@ -273,17 +273,17 @@
  * but not too much to meddle with FLASH accesses
  */
 /* allow for max 4 MB of Flash */
-#define CFG_REMAP_OR_AM		0xFFC00000	/* OR addr mask */
-#define CFG_PRELIM_OR_AM	0xFFC00000	/* OR addr mask */
+#define CONFIG_SYS_REMAP_OR_AM		0xFFC00000	/* OR addr mask */
+#define CONFIG_SYS_PRELIM_OR_AM	0xFFC00000	/* OR addr mask */
 
 /* FLASH timing: ACS = 11, TRLX = 1, CSNT = 1, SCY = 5, EHTR = 0	*/
-#define CFG_OR_TIMING_FLASH	( OR_CSNT_SAM | /*OR_ACS_DIV4 |*/ OR_BI | \
+#define CONFIG_SYS_OR_TIMING_FLASH	( OR_CSNT_SAM | /*OR_ACS_DIV4 |*/ OR_BI | \
 				 OR_SCY_5_CLK | OR_TRLX)
 
-#define CFG_OR0_REMAP	(CFG_REMAP_OR_AM  | CFG_OR_TIMING_FLASH)
-#define CFG_OR0_PRELIM	(CFG_PRELIM_OR_AM | CFG_OR_TIMING_FLASH)
+#define CONFIG_SYS_OR0_REMAP	(CONFIG_SYS_REMAP_OR_AM  | CONFIG_SYS_OR_TIMING_FLASH)
+#define CONFIG_SYS_OR0_PRELIM	(CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_FLASH)
 /* 8 bit, bank valid */
-#define CFG_BR0_PRELIM	((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_PS_8 | BR_V )
+#define CONFIG_SYS_BR0_PRELIM	((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_PS_8 | BR_V )
 
 /*
  * BR1/OR1 - SDRAM
@@ -296,8 +296,8 @@
 
 #define SDRAM_MAX_SIZE		0x04000000	/* max 64 MB SDRAM */
 
-#define CFG_OR1_PRELIM	(SDRAM_PRELIM_OR_AM | SDRAM_TIMING )
-#define CFG_BR1_PRELIM	((SDRAM_BASE_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
+#define CONFIG_SYS_OR1_PRELIM	(SDRAM_PRELIM_OR_AM | SDRAM_TIMING )
+#define CONFIG_SYS_BR1_PRELIM	((SDRAM_BASE_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
 
 /*
  * BR2/OR2 - HPRO2: PEB2256   @ 0xE0000000, 8 Bit wide
@@ -306,8 +306,8 @@
 #define HPRO2_OR_AM		0xFFFF8000
 #define HPRO2_TIMING		0x00000934
 
-#define CFG_OR2 (HPRO2_OR_AM | HPRO2_TIMING)
-#define CFG_BR2	((HPRO2_BASE & BR_BA_MSK) | BR_PS_8 | BR_V )
+#define CONFIG_SYS_OR2 (HPRO2_OR_AM | HPRO2_TIMING)
+#define CONFIG_SYS_BR2	((HPRO2_BASE & BR_BA_MSK) | BR_PS_8 | BR_V )
 
 /*
  * BR3/OR3: not used
@@ -322,14 +322,14 @@
  */
 
 /* periodic timer for refresh */
-#define CFG_MAMR_PTA	97		/* start with divider for 100 MHz	*/
+#define CONFIG_SYS_MAMR_PTA	97		/* start with divider for 100 MHz	*/
 
 /* 8 column SDRAM */
-#define CFG_MAMR_8COL	((CFG_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
+#define CONFIG_SYS_MAMR_8COL	((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
 			 MAMR_AMA_TYPE_0 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A11 |	\
 			 MAMR_RLFA_1X	 | MAMR_WLFA_1X	   | MAMR_TLFA_4X)
 /* 9 column SDRAM */
-#define CFG_MAMR_9COL	((CFG_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
+#define CONFIG_SYS_MAMR_9COL	((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
 			 MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 |	\
 			 MAMR_RLFA_1X	 | MAMR_WLFA_1X	   | MAMR_TLFA_4X)
 
diff --git a/include/configs/hmi1001.h b/include/configs/hmi1001.h
index 205f5ccb0..16b06cd8b 100644
--- a/include/configs/hmi1001.h
+++ b/include/configs/hmi1001.h
@@ -33,7 +33,7 @@
 #define CONFIG_MPC5200		1	/* (more precisely an MPC5200 CPU)	*/
 #define CONFIG_HMI1001		1	/* HMI1001 board			*/
 
-#define CFG_MPC5XXX_CLKIN	33000000 /* ... running at 33.000000MHz		*/
+#define CONFIG_SYS_MPC5XXX_CLKIN	33000000 /* ... running at 33.000000MHz		*/
 
 #define BOOTFLAG_COLD		0x01	/* Normal Power-On: Boot from FLASH	*/
 #define BOOTFLAG_WARM		0x02	/* Software reboot			*/
@@ -47,7 +47,7 @@
  */
 #define CONFIG_PSC_CONSOLE	1	/* console is on PSC1	*/
 #define CONFIG_BAUDRATE		115200	/* ... at 115200 bps	*/
-#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
 
 /* Partitions */
 #define CONFIG_DOS_PARTITION
@@ -81,7 +81,7 @@
 #define	CONFIG_TIMESTAMP	1	/* Print image info with timestamp */
 
 #if (TEXT_BASE == 0xFFF00000) /* Boot low */
-#   define CFG_LOWBOOT		1
+#   define CONFIG_SYS_LOWBOOT		1
 #endif
 
 /*
@@ -116,68 +116,68 @@
 /*
  * IPB Bus clocking configuration.
  */
-#undef CFG_IPBCLK_EQUALS_XLBCLK		/* define for 133MHz speed */
+#undef CONFIG_SYS_IPBCLK_EQUALS_XLBCLK		/* define for 133MHz speed */
 
 /*
  * I2C configuration
  */
 #define CONFIG_HARD_I2C		1	/* I2C with hardware support */
-#define CFG_I2C_MODULE		2	/* Select I2C module #1 or #2 */
+#define CONFIG_SYS_I2C_MODULE		2	/* Select I2C module #1 or #2 */
 
-#define CFG_I2C_SPEED		100000 /* 100 kHz */
-#define CFG_I2C_SLAVE		0x7F
+#define CONFIG_SYS_I2C_SPEED		100000 /* 100 kHz */
+#define CONFIG_SYS_I2C_SLAVE		0x7F
 
 /*
  * EEPROM configuration
  */
-#define CFG_I2C_EEPROM_ADDR		0x58
-#define CFG_I2C_EEPROM_ADDR_LEN		1
-#define CFG_EEPROM_PAGE_WRITE_BITS	4
-#define CFG_EEPROM_PAGE_WRITE_DELAY_MS	10
+#define CONFIG_SYS_I2C_EEPROM_ADDR		0x58
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN		1
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS	4
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	10
 
 /*
  * RTC configuration
  */
 #define CONFIG_RTC_PCF8563
-#define CFG_I2C_RTC_ADDR		0x51
+#define CONFIG_SYS_I2C_RTC_ADDR		0x51
 
 /*
  * Flash configuration
  */
-#define CFG_FLASH_BASE		0xFF800000
+#define CONFIG_SYS_FLASH_BASE		0xFF800000
 
-#define CFG_FLASH_SIZE		0x00800000 /* 8 MByte */
-#define CFG_MAX_FLASH_SECT	67	/* max num of sects on one chip */
+#define CONFIG_SYS_FLASH_SIZE		0x00800000 /* 8 MByte */
+#define CONFIG_SYS_MAX_FLASH_SECT	67	/* max num of sects on one chip */
 
-#define CFG_ENV_ADDR		(TEXT_BASE+0x40000) /* second sector */
-#define CFG_MAX_FLASH_BANKS	1	/* max num of flash banks
+#define CONFIG_ENV_ADDR		(TEXT_BASE+0x40000) /* second sector */
+#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max num of flash banks
 					   (= chip selects) */
-#define CFG_FLASH_ERASE_TOUT	240000	/* Flash Erase Timeout (in ms)	*/
-#define CFG_FLASH_WRITE_TOUT	500	/* Flash Write Timeout (in ms)	*/
+#define CONFIG_SYS_FLASH_ERASE_TOUT	240000	/* Flash Erase Timeout (in ms)	*/
+#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Flash Write Timeout (in ms)	*/
 
 #define CONFIG_FLASH_CFI_DRIVER
-#define CFG_FLASH_CFI
-#define CFG_FLASH_EMPTY_INFO
-#define CFG_FLASH_CFI_AMD_RESET
+#define CONFIG_SYS_FLASH_CFI
+#define CONFIG_SYS_FLASH_EMPTY_INFO
+#define CONFIG_SYS_FLASH_CFI_AMD_RESET
 
 /*
  * Environment settings
  */
-#define CFG_ENV_IS_IN_FLASH	1
-#define CFG_ENV_SIZE		0x4000
-#define CFG_ENV_SECT_SIZE	0x20000
-#define CFG_ENV_OFFSET_REDUND   (CFG_ENV_OFFSET+CFG_ENV_SECT_SIZE)
-#define CFG_ENV_SIZE_REDUND     (CFG_ENV_SIZE)
+#define CONFIG_ENV_IS_IN_FLASH	1
+#define CONFIG_ENV_SIZE		0x4000
+#define CONFIG_ENV_SECT_SIZE	0x20000
+#define CONFIG_ENV_OFFSET_REDUND   (CONFIG_ENV_OFFSET+CONFIG_ENV_SECT_SIZE)
+#define CONFIG_ENV_SIZE_REDUND     (CONFIG_ENV_SIZE)
 
 /*
  * Memory map
  */
-#define CFG_MBAR		0xF0000000
-#define CFG_SDRAM_BASE		0x00000000
-#define CFG_DEFAULT_MBAR	0x80000000
-#define CFG_DISPLAY_BASE	0x80600000
-#define CFG_STATUS1_BASE	0x80600200
-#define CFG_STATUS2_BASE	0x80600300
+#define CONFIG_SYS_MBAR		0xF0000000
+#define CONFIG_SYS_SDRAM_BASE		0x00000000
+#define CONFIG_SYS_DEFAULT_MBAR	0x80000000
+#define CONFIG_SYS_DISPLAY_BASE	0x80600000
+#define CONFIG_SYS_STATUS1_BASE	0x80600200
+#define CONFIG_SYS_STATUS2_BASE	0x80600300
 
 /* Settings for XLB = 132 MHz */
 #define SDRAM_DDR	 1
@@ -189,27 +189,27 @@
 #define SDRAM_TAPDELAY  0x10000000
 
 /* Use ON-Chip SRAM until RAM will be available */
-#define CFG_INIT_RAM_ADDR	MPC5XXX_SRAM
+#define CONFIG_SYS_INIT_RAM_ADDR	MPC5XXX_SRAM
 #ifdef CONFIG_POST
 /* preserve space for the post_word at end of on-chip SRAM */
-#define CFG_INIT_RAM_END	MPC5XXX_SRAM_POST_SIZE
+#define CONFIG_SYS_INIT_RAM_END	MPC5XXX_SRAM_POST_SIZE
 #else
-#define CFG_INIT_RAM_END	MPC5XXX_SRAM_SIZE
+#define CONFIG_SYS_INIT_RAM_END	MPC5XXX_SRAM_SIZE
 #endif
 
 
-#define CFG_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
-#define CFG_MONITOR_BASE    TEXT_BASE
-#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
-#   define CFG_RAMBOOT		1
+#define CONFIG_SYS_MONITOR_BASE    TEXT_BASE
+#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
+#   define CONFIG_SYS_RAMBOOT		1
 #endif
 
-#define CFG_MONITOR_LEN		(192 << 10)	/* Reserve 192 kB for Monitor	*/
-#define CFG_MALLOC_LEN		(512 << 10)	/* Reserve 128 kB for malloc()	*/
-#define CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
+#define CONFIG_SYS_MONITOR_LEN		(192 << 10)	/* Reserve 192 kB for Monitor	*/
+#define CONFIG_SYS_MALLOC_LEN		(512 << 10)	/* Reserve 128 kB for malloc()	*/
+#define CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
 
 /*
  * Ethernet configuration
@@ -221,36 +221,36 @@
 /*
  * GPIO configuration
  */
-#define CFG_GPS_PORT_CONFIG	0x01051004
+#define CONFIG_SYS_GPS_PORT_CONFIG	0x01051004
 
 /*
  * Miscellaneous configurable options
  */
-#define CFG_LONGHELP			/* undef to save memory	    */
-#define CFG_PROMPT		"=> "	/* Monitor Command Prompt   */
+#define CONFIG_SYS_LONGHELP			/* undef to save memory	    */
+#define CONFIG_SYS_PROMPT		"=> "	/* Monitor Command Prompt   */
 #if defined(CONFIG_CMD_KGDB)
-#define CFG_CBSIZE		1024	/* Console I/O Buffer Size  */
+#define CONFIG_SYS_CBSIZE		1024	/* Console I/O Buffer Size  */
 #else
-#define CFG_CBSIZE		256	/* Console I/O Buffer Size  */
+#define CONFIG_SYS_CBSIZE		256	/* Console I/O Buffer Size  */
 #endif
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define CFG_MAXARGS		16	/* max number of command args	*/
-#define CFG_BARGSIZE		CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS		16	/* max number of command args	*/
+#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
 
-#define CFG_CACHELINE_SIZE	32	/* For MPC5xxx CPUs			*/
+#define CONFIG_SYS_CACHELINE_SIZE	32	/* For MPC5xxx CPUs			*/
 #if defined(CONFIG_CMD_KGDB)
-#  define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value	*/
+#  define CONFIG_SYS_CACHELINE_SHIFT	5	/* log base 2 of the above value	*/
 #endif
 
 /* Enable an alternate, more extensive memory test */
-#define CFG_ALT_MEMTEST
+#define CONFIG_SYS_ALT_MEMTEST
 
-#define CFG_MEMTEST_START	0x00100000	/* memtest works on */
-#define CFG_MEMTEST_END		0x00f00000	/* 1 ... 15 MB in DRAM	*/
+#define CONFIG_SYS_MEMTEST_START	0x00100000	/* memtest works on */
+#define CONFIG_SYS_MEMTEST_END		0x00f00000	/* 1 ... 15 MB in DRAM	*/
 
-#define CFG_LOAD_ADDR		0x100000	/* default load address */
+#define CONFIG_SYS_LOAD_ADDR		0x100000	/* default load address */
 
-#define CFG_HZ			1000	/* decrementer freq: 1 ms ticks */
+#define CONFIG_SYS_HZ			1000	/* decrementer freq: 1 ms ticks */
 
 /*
  * Enable loopw command.
@@ -261,36 +261,36 @@
  * Various low-level settings
  */
 #if defined(CONFIG_MPC5200)
-#define CFG_HID0_INIT		HID0_ICE | HID0_ICFI
-#define CFG_HID0_FINAL		HID0_ICE
+#define CONFIG_SYS_HID0_INIT		HID0_ICE | HID0_ICFI
+#define CONFIG_SYS_HID0_FINAL		HID0_ICE
 #else
-#define CFG_HID0_INIT		0
-#define CFG_HID0_FINAL		0
+#define CONFIG_SYS_HID0_INIT		0
+#define CONFIG_SYS_HID0_FINAL		0
 #endif
 
-#define CFG_BOOTCS_START	CFG_FLASH_BASE
-#define CFG_BOOTCS_SIZE		CFG_FLASH_SIZE
-#define CFG_BOOTCS_CFG		0x0004FB00
-#define CFG_CS0_START		CFG_FLASH_BASE
-#define CFG_CS0_SIZE		CFG_FLASH_SIZE
+#define CONFIG_SYS_BOOTCS_START	CONFIG_SYS_FLASH_BASE
+#define CONFIG_SYS_BOOTCS_SIZE		CONFIG_SYS_FLASH_SIZE
+#define CONFIG_SYS_BOOTCS_CFG		0x0004FB00
+#define CONFIG_SYS_CS0_START		CONFIG_SYS_FLASH_BASE
+#define CONFIG_SYS_CS0_SIZE		CONFIG_SYS_FLASH_SIZE
 
 /* 8Mbit SRAM @0x80100000 */
-#define CFG_CS1_START		0x80100000
-#define CFG_CS1_SIZE		0x00100000
-#define CFG_CS1_CFG		0x19B00
+#define CONFIG_SYS_CS1_START		0x80100000
+#define CONFIG_SYS_CS1_SIZE		0x00100000
+#define CONFIG_SYS_CS1_CFG		0x19B00
 
 /* FRAM 32Kbyte @0x80700000 */
-#define CFG_CS2_START		0x80700000
-#define CFG_CS2_SIZE		0x00008000
-#define CFG_CS2_CFG		0x19800
+#define CONFIG_SYS_CS2_START		0x80700000
+#define CONFIG_SYS_CS2_SIZE		0x00008000
+#define CONFIG_SYS_CS2_CFG		0x19800
 
 /* Display H1, Status Inputs, EPLD @0x80600000 */
-#define CFG_CS3_START		0x80600000
-#define CFG_CS3_SIZE		0x00100000
-#define CFG_CS3_CFG		0x00019800
+#define CONFIG_SYS_CS3_START		0x80600000
+#define CONFIG_SYS_CS3_SIZE		0x00100000
+#define CONFIG_SYS_CS3_CFG		0x00019800
 
-#define CFG_CS_BURST		0x00000000
-#define CFG_CS_DEADCYCLE	0x33333333
+#define CONFIG_SYS_CS_BURST		0x00000000
+#define CONFIG_SYS_CS_DEADCYCLE	0x33333333
 
 /*-----------------------------------------------------------------------
  * IDE/ATA stuff Supports IDE harddisk
@@ -302,26 +302,26 @@
 #undef	CONFIG_IDE_8xx_DIRECT		/* Direct IDE    not supported	*/
 #undef	CONFIG_IDE_LED			/* LED   for ide not supported	*/
 
-#define CFG_IDE_MAXBUS		1	/* max. 1 IDE bus		*/
-#define CFG_IDE_MAXDEVICE	2	/* max. 2 drives per IDE bus	*/
+#define CONFIG_SYS_IDE_MAXBUS		1	/* max. 1 IDE bus		*/
+#define CONFIG_SYS_IDE_MAXDEVICE	2	/* max. 2 drives per IDE bus	*/
 
 #define CONFIG_IDE_PREINIT	1
 
-#define CFG_ATA_IDE0_OFFSET	0x0000
+#define CONFIG_SYS_ATA_IDE0_OFFSET	0x0000
 
-#define CFG_ATA_BASE_ADDR	MPC5XXX_ATA
+#define CONFIG_SYS_ATA_BASE_ADDR	MPC5XXX_ATA
 
 /* Offset for data I/O			*/
-#define CFG_ATA_DATA_OFFSET	(0x0060)
+#define CONFIG_SYS_ATA_DATA_OFFSET	(0x0060)
 
 /* Offset for normal register accesses	*/
-#define CFG_ATA_REG_OFFSET	(CFG_ATA_DATA_OFFSET)
+#define CONFIG_SYS_ATA_REG_OFFSET	(CONFIG_SYS_ATA_DATA_OFFSET)
 
 /* Offset for alternate registers	*/
-#define CFG_ATA_ALT_OFFSET	(0x005C)
+#define CONFIG_SYS_ATA_ALT_OFFSET	(0x005C)
 
 /* Interval between registers                                                */
-#define CFG_ATA_STRIDE          4
+#define CONFIG_SYS_ATA_STRIDE          4
 
 #define CONFIG_ATAPI            1
 
@@ -348,13 +348,13 @@
 #define CONFIG_PCI_IO_PHYS	CONFIG_PCI_IO_BUS
 #define CONFIG_PCI_IO_SIZE	0x01000000
 
-#define CFG_ISA_IO		CONFIG_PCI_IO_BUS
+#define CONFIG_SYS_ISA_IO		CONFIG_PCI_IO_BUS
 
 /*---------------------------------------------------------------------*/
 /* Display addresses						       */
 /*---------------------------------------------------------------------*/
 
-#define CFG_DISP_CHR_RAM	(CFG_DISPLAY_BASE + 0x38)
-#define CFG_DISP_CWORD		(CFG_DISPLAY_BASE + 0x30)
+#define CONFIG_SYS_DISP_CHR_RAM	(CONFIG_SYS_DISPLAY_BASE + 0x38)
+#define CONFIG_SYS_DISP_CWORD		(CONFIG_SYS_DISPLAY_BASE + 0x30)
 
 #endif /* __CONFIG_H */
diff --git a/include/configs/hymod.h b/include/configs/hymod.h
index 264192f26..0fdcda230 100644
--- a/include/configs/hymod.h
+++ b/include/configs/hymod.h
@@ -87,10 +87,10 @@
  * - RAM for BD/Buffers is on the 60x Bus (see 28-13)
  * - Enable Full Duplex in FSMR
  */
-# define CFG_CMXFCR_MASK	(CMXFCR_FC1|CMXFCR_RF1CS_MSK|CMXFCR_TF1CS_MSK)
-# define CFG_CMXFCR_VALUE	(CMXFCR_RF1CS_CLK10|CMXFCR_TF1CS_CLK11)
-# define CFG_CPMFCR_RAMTYPE	0
-# define CFG_FCC_PSMR		(FCC_PSMR_FDE|FCC_PSMR_LPB)
+# define CONFIG_SYS_CMXFCR_MASK	(CMXFCR_FC1|CMXFCR_RF1CS_MSK|CMXFCR_TF1CS_MSK)
+# define CONFIG_SYS_CMXFCR_VALUE	(CMXFCR_RF1CS_CLK10|CMXFCR_TF1CS_CLK11)
+# define CONFIG_SYS_CPMFCR_RAMTYPE	0
+# define CONFIG_SYS_FCC_PSMR		(FCC_PSMR_FDE|FCC_PSMR_LPB)
 
 # define MDIO_PORT		0		/* Port A */
 # define MDIO_DATA_PINMASK	0x00040000	/* Pin 13 */
@@ -104,10 +104,10 @@
  * - RAM for BD/Buffers is on the 60x Bus (see 28-13)
  * - Enable Full Duplex in FSMR
  */
-# define CFG_CMXFCR_MASK	(CMXFCR_FC2|CMXFCR_RF2CS_MSK|CMXFCR_TF2CS_MSK)
-# define CFG_CMXFCR_VALUE	(CMXFCR_RF2CS_CLK13|CMXFCR_TF2CS_CLK14)
-# define CFG_CPMFCR_RAMTYPE	0
-# define CFG_FCC_PSMR		(FCC_PSMR_FDE|FCC_PSMR_LPB)
+# define CONFIG_SYS_CMXFCR_MASK	(CMXFCR_FC2|CMXFCR_RF2CS_MSK|CMXFCR_TF2CS_MSK)
+# define CONFIG_SYS_CMXFCR_VALUE	(CMXFCR_RF2CS_CLK13|CMXFCR_TF2CS_CLK14)
+# define CONFIG_SYS_CPMFCR_RAMTYPE	0
+# define CONFIG_SYS_FCC_PSMR		(FCC_PSMR_FDE|FCC_PSMR_LPB)
 
 # define MDIO_PORT		0		/* Port A */
 # define MDIO_DATA_PINMASK	0x00000040	/* Pin 25 */
@@ -121,10 +121,10 @@
  * - RAM for BD/Buffers is on the 60x Bus (see 28-13)
  * - Enable Full Duplex in FSMR
  */
-# define CFG_CMXFCR_MASK	(CMXFCR_FC3|CMXFCR_RF3CS_MSK|CMXFCR_TF3CS_MSK)
-# define CFG_CMXFCR_VALUE	(CMXFCR_RF3CS_CLK15|CMXFCR_TF3CS_CLK16)
-# define CFG_CPMFCR_RAMTYPE	0
-# define CFG_FCC_PSMR		(FCC_PSMR_FDE|FCC_PSMR_LPB)
+# define CONFIG_SYS_CMXFCR_MASK	(CMXFCR_FC3|CMXFCR_RF3CS_MSK|CMXFCR_TF3CS_MSK)
+# define CONFIG_SYS_CMXFCR_VALUE	(CMXFCR_RF3CS_CLK15|CMXFCR_TF3CS_CLK16)
+# define CONFIG_SYS_CPMFCR_RAMTYPE	0
+# define CONFIG_SYS_FCC_PSMR		(FCC_PSMR_FDE|FCC_PSMR_LPB)
 
 # define MDIO_PORT		0		/* Port A */
 # define MDIO_DATA_PINMASK	0x00000100	/* Pin 23 */
@@ -252,54 +252,53 @@
 /*
  * Hymod specific configurable options
  */
-#undef	CFG_HYMOD_DBLEDS			/* walk mezz board LEDs */
+#undef	CONFIG_SYS_HYMOD_DBLEDS			/* walk mezz board LEDs */
 
 /*
  * Miscellaneous configurable options
  */
-#define	CFG_LONGHELP			/* undef to save memory		*/
-#define	CFG_PROMPT	"=> "		/* Monitor Command Prompt	*/
+#define	CONFIG_SYS_LONGHELP			/* undef to save memory		*/
+#define	CONFIG_SYS_PROMPT	"=> "		/* Monitor Command Prompt	*/
 #if defined(CONFIG_CMD_KGDB)
-#define	CFG_CBSIZE	1024		/* Console I/O Buffer Size	*/
+#define	CONFIG_SYS_CBSIZE	1024		/* Console I/O Buffer Size	*/
 #else
-#define	CFG_CBSIZE	256		/* Console I/O Buffer Size	*/
+#define	CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size	*/
 #endif
-#define	CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define	CFG_MAXARGS	16		/* max number of command args	*/
-#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+#define	CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define	CONFIG_SYS_MAXARGS	16		/* max number of command args	*/
+#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
 
-#define CFG_MEMTEST_START	0x00400000	/* memtest works on	*/
-#define CFG_MEMTEST_END		0x03c00000	/* 4 ... 60 MB in DRAM	*/
+#define CONFIG_SYS_MEMTEST_START	0x00400000	/* memtest works on	*/
+#define CONFIG_SYS_MEMTEST_END		0x03c00000	/* 4 ... 60 MB in DRAM	*/
 
-#define CFG_CLKS_IN_HZ		1	/* everything, incl board info, in Hz */
+#define CONFIG_SYS_CLKS_IN_HZ		1	/* everything, incl board info, in Hz */
 
-#define	CFG_LOAD_ADDR		0x100000	/* default load address	*/
+#define	CONFIG_SYS_LOAD_ADDR		0x100000	/* default load address	*/
 
-#define	CFG_HZ		1000		/* decrementer freq: 1 ms ticks	*/
+#define	CONFIG_SYS_HZ		1000		/* decrementer freq: 1 ms ticks	*/
 
-#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
 
-#define	CFG_I2C_SPEED		50000
-#define	CFG_I2C_SLAVE		0x7e
+#define	CONFIG_SYS_I2C_SPEED		50000
+#define	CONFIG_SYS_I2C_SLAVE		0x7e
 
 /* these are for the ST M24C02 2kbit serial i2c eeprom */
-#define CFG_I2C_EEPROM_ADDR	0x50		/* base address */
-#define CFG_I2C_EEPROM_ADDR_LEN	1		/* bytes of address */
+#define CONFIG_SYS_I2C_EEPROM_ADDR	0x50		/* base address */
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN	1		/* bytes of address */
 /* mask of address bits that overflow into the "EEPROM chip address"    */
-#define CFG_I2C_EEPROM_ADDR_OVERFLOW	0x07
+#define CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW	0x07
 
-#define CFG_EEPROM_PAGE_WRITE_ENABLE	1	/* write eeprom in pages */
-#define CFG_EEPROM_PAGE_WRITE_BITS	4	/* 16 byte write page size */
-#define CFG_EEPROM_PAGE_WRITE_DELAY_MS	10	/* and takes up to 10 msec */
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS	4	/* 16 byte write page size */
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	10	/* and takes up to 10 msec */
 
-#define CFG_I2C_MULTI_EEPROMS	1		/* hymod has two eeproms */
+#define CONFIG_SYS_I2C_MULTI_EEPROMS	1		/* hymod has two eeproms */
 
-#define CFG_I2C_RTC_ADDR	0x51	/* philips PCF8563 RTC address */
+#define CONFIG_SYS_I2C_RTC_ADDR	0x51	/* philips PCF8563 RTC address */
 
 /*
  * standard dtt sensor configuration - bottom bit will determine local or
  * remote sensor of the ADM1021, the rest determines index into
- * CFG_DTT_ADM1021 array below.
+ * CONFIG_SYS_DTT_ADM1021 array below.
  *
  * On HYMOD board, the remote sensor should be connected to the MPC8260
  * temperature diode thingy, but an errata said this didn't work and
@@ -324,7 +323,7 @@
  * - local temp sensor enabled, min set to 0 deg, max set to 85 deg
  * - remote temp sensor disabled (see comment for CONFIG_DTT_SENSORS above)
  */
-#define CFG_DTT_ADM1021		{ { 0x2a, 0x02, 0, 1, 0, 85, 0, } }
+#define CONFIG_SYS_DTT_ADM1021		{ { 0x2a, 0x02, 0, 1, 0, 85, 0, } }
 
 /*
  * Low Level Configuration Settings
@@ -335,86 +334,86 @@
 /*-----------------------------------------------------------------------
  * Hard Reset Configuration Words
  *
- * if you change bits in the HRCW, you must also change the CFG_*
+ * if you change bits in the HRCW, you must also change the CONFIG_SYS_*
  * defines for the various registers affected by the HRCW e.g. changing
- * HRCW_DPPCxx requires you to also change CFG_SIUMCR.
+ * HRCW_DPPCxx requires you to also change CONFIG_SYS_SIUMCR.
  */
 #ifdef DEBUG
-#define CFG_HRCW_MASTER	(HRCW_BPS11|HRCW_CIP|HRCW_L2CPC01|HRCW_DPPC10|\
+#define CONFIG_SYS_HRCW_MASTER	(HRCW_BPS11|HRCW_CIP|HRCW_L2CPC01|HRCW_DPPC10|\
 			 HRCW_ISB100|HRCW_BMS|HRCW_MMR11|HRCW_APPC10|\
 			 HRCW_MODCK_H0010)
 #else
-#define CFG_HRCW_MASTER	(HRCW_BPS11|HRCW_CIP|HRCW_L2CPC01|HRCW_DPPC10|\
+#define CONFIG_SYS_HRCW_MASTER	(HRCW_BPS11|HRCW_CIP|HRCW_L2CPC01|HRCW_DPPC10|\
 			 HRCW_ISB100|HRCW_BMS|HRCW_MMR11|HRCW_APPC10|\
 			 HRCW_MODCK_H0101)
 #endif
 /* no slaves so just duplicate the master hrcw */
-#define CFG_HRCW_SLAVE1	CFG_HRCW_MASTER
-#define CFG_HRCW_SLAVE2	CFG_HRCW_MASTER
-#define CFG_HRCW_SLAVE3	CFG_HRCW_MASTER
-#define CFG_HRCW_SLAVE4	CFG_HRCW_MASTER
-#define CFG_HRCW_SLAVE5	CFG_HRCW_MASTER
-#define CFG_HRCW_SLAVE6	CFG_HRCW_MASTER
-#define CFG_HRCW_SLAVE7	CFG_HRCW_MASTER
+#define CONFIG_SYS_HRCW_SLAVE1	CONFIG_SYS_HRCW_MASTER
+#define CONFIG_SYS_HRCW_SLAVE2	CONFIG_SYS_HRCW_MASTER
+#define CONFIG_SYS_HRCW_SLAVE3	CONFIG_SYS_HRCW_MASTER
+#define CONFIG_SYS_HRCW_SLAVE4	CONFIG_SYS_HRCW_MASTER
+#define CONFIG_SYS_HRCW_SLAVE5	CONFIG_SYS_HRCW_MASTER
+#define CONFIG_SYS_HRCW_SLAVE6	CONFIG_SYS_HRCW_MASTER
+#define CONFIG_SYS_HRCW_SLAVE7	CONFIG_SYS_HRCW_MASTER
 
 /*-----------------------------------------------------------------------
  * Internal Memory Mapped Register
  */
-#define CFG_IMMR		0xF0000000
+#define CONFIG_SYS_IMMR		0xF0000000
 
 /*-----------------------------------------------------------------------
  * Definitions for initial stack pointer and data area (in DPRAM)
  */
-#define CFG_INIT_RAM_ADDR	CFG_IMMR
-#define	CFG_INIT_RAM_END	0x4000	/* End of used area in DPRAM	*/
-#define	CFG_GBL_DATA_SIZE	128  /* size in bytes reserved for initial data */
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define	CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_IMMR
+#define	CONFIG_SYS_INIT_RAM_END	0x4000	/* End of used area in DPRAM	*/
+#define	CONFIG_SYS_GBL_DATA_SIZE	128  /* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define	CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
 /*-----------------------------------------------------------------------
  * Start addresses for the final memory configuration
  * (Set up by the startup code)
- * Please note that CFG_SDRAM_BASE _must_ start at 0
+ * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
  */
-#define	CFG_SDRAM_BASE		0x00000000
-#define CFG_FLASH_BASE		TEXT_BASE
-#define	CFG_MONITOR_BASE	TEXT_BASE
-#define CFG_FPGA_BASE		0x80000000
+#define	CONFIG_SYS_SDRAM_BASE		0x00000000
+#define CONFIG_SYS_FLASH_BASE		TEXT_BASE
+#define	CONFIG_SYS_MONITOR_BASE	TEXT_BASE
+#define CONFIG_SYS_FPGA_BASE		0x80000000
 /*
- * unfortunately, CFG_MONITOR_LEN must include the
+ * unfortunately, CONFIG_SYS_MONITOR_LEN must include the
  * (very large i.e. 256kB) environment flash sector
  */
-#define	CFG_MONITOR_LEN		(512 << 10)	/* Reserve 512 kB for Monitor*/
-#define	CFG_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()*/
+#define	CONFIG_SYS_MONITOR_LEN		(512 << 10)	/* Reserve 512 kB for Monitor*/
+#define	CONFIG_SYS_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()*/
 
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define	CFG_BOOTMAPSZ		(8 << 20)	/* Initial Mem map for Linux*/
+#define	CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Mem map for Linux*/
 
 /*-----------------------------------------------------------------------
  * FLASH organization
  */
-#define CFG_MAX_FLASH_BANKS	2	/* max num of memory banks	*/
-#define CFG_MAX_FLASH_SECT	67	/* max num of sects on one chip	*/
+#define CONFIG_SYS_MAX_FLASH_BANKS	2	/* max num of memory banks	*/
+#define CONFIG_SYS_MAX_FLASH_SECT	67	/* max num of sects on one chip	*/
 
-#define CFG_FLASH_ERASE_TOUT	120000	/* Flash Erase Timeout (in ms)	*/
-#define CFG_FLASH_WRITE_TOUT	500	/* Flash Write Timeout (in ms)	*/
+#define CONFIG_SYS_FLASH_ERASE_TOUT	120000	/* Flash Erase Timeout (in ms)	*/
+#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Flash Write Timeout (in ms)	*/
 
-#define	CFG_ENV_IS_IN_FLASH	1
-#define	CFG_ENV_SIZE		0x40000	/* Total Size of Environment Sector */
-#define CFG_ENV_SECT_SIZE	0x40000	/* see README - env sect real size */
-#define	CFG_ENV_ADDR	(CFG_FLASH_BASE+CFG_MONITOR_LEN-CFG_ENV_SECT_SIZE)
-#define	CFG_USE_PPCENV			/* Environment embedded in sect .ppcenv */
+#define	CONFIG_ENV_IS_IN_FLASH	1
+#define	CONFIG_ENV_SIZE		0x40000	/* Total Size of Environment Sector */
+#define CONFIG_ENV_SECT_SIZE	0x40000	/* see README - env sect real size */
+#define	CONFIG_ENV_ADDR	(CONFIG_SYS_FLASH_BASE+CONFIG_SYS_MONITOR_LEN-CONFIG_ENV_SECT_SIZE)
+#define	CONFIG_SYS_USE_PPCENV			/* Environment embedded in sect .ppcenv */
 
 /*-----------------------------------------------------------------------
  * Cache Configuration
  */
-#define CFG_CACHELINE_SIZE	32	/* For MPC8260 CPU		*/
+#define CONFIG_SYS_CACHELINE_SIZE	32	/* For MPC8260 CPU		*/
 #if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value*/
+#define CONFIG_SYS_CACHELINE_SHIFT	5	/* log base 2 of the above value*/
 #endif
 
 /*-----------------------------------------------------------------------
@@ -427,14 +426,14 @@
  *
  * HID1 has only read-only information - nothing to set.
  */
-#define CFG_HID0_INIT	(HID0_ICE|HID0_DCE|HID0_ICFI|HID0_DCI|\
+#define CONFIG_SYS_HID0_INIT	(HID0_ICE|HID0_DCE|HID0_ICFI|HID0_DCI|\
 				HID0_IFEM|HID0_ABE)
 #ifdef DEBUG
-#define CFG_HID0_FINAL	0
+#define CONFIG_SYS_HID0_FINAL	0
 #else
-#define CFG_HID0_FINAL	(HID0_ICE|HID0_IFEM|HID0_ABE)
+#define CONFIG_SYS_HID0_FINAL	(HID0_ICE|HID0_IFEM|HID0_ABE)
 #endif
-#define CFG_HID2	0
+#define CONFIG_SYS_HID2	0
 
 /*-----------------------------------------------------------------------
  * RMR - Reset Mode Register					 5-5
@@ -442,22 +441,22 @@
  * turn on Checkstop Reset Enable
  */
 #ifdef DEBUG
-#define CFG_RMR		0
+#define CONFIG_SYS_RMR		0
 #else
-#define CFG_RMR		RMR_CSRE
+#define CONFIG_SYS_RMR		RMR_CSRE
 #endif
 
 /*-----------------------------------------------------------------------
  * BCR - Bus Configuration					 4-25
  *-----------------------------------------------------------------------
  */
-#define CFG_BCR		(BCR_ETM)
+#define CONFIG_SYS_BCR		(BCR_ETM)
 
 /*-----------------------------------------------------------------------
  * SIUMCR - SIU Module Configuration				 4-31
  *-----------------------------------------------------------------------
  */
-#define CFG_SIUMCR	(SIUMCR_DPPC10|SIUMCR_L2CPC01|\
+#define CONFIG_SYS_SIUMCR	(SIUMCR_DPPC10|SIUMCR_L2CPC01|\
 			 SIUMCR_APPC10|SIUMCR_MMR11)
 
 /*-----------------------------------------------------------------------
@@ -467,10 +466,10 @@
  * Watchdog & Bus Monitor Timer max, 60x & Local Bus Monitor enable
  */
 #if defined(CONFIG_WATCHDOG)
-#define CFG_SYPCR	(SYPCR_SWTC|SYPCR_BMT|SYPCR_PBME|SYPCR_LBME|\
+#define CONFIG_SYS_SYPCR	(SYPCR_SWTC|SYPCR_BMT|SYPCR_PBME|SYPCR_LBME|\
 			 SYPCR_SWRI|SYPCR_SWP|SYPCR_SWE)
 #else
-#define CFG_SYPCR	(SYPCR_SWTC|SYPCR_BMT|SYPCR_PBME|SYPCR_LBME|\
+#define CONFIG_SYS_SYPCR	(SYPCR_SWTC|SYPCR_BMT|SYPCR_PBME|SYPCR_LBME|\
 			 SYPCR_SWRI|SYPCR_SWP)
 #endif /* CONFIG_WATCHDOG */
 
@@ -480,7 +479,7 @@
  * Clear once per Second and Alarm Interrupt Status, Set 32KHz timersclk,
  * and enable Time Counter
  */
-#define CFG_TMCNTSC	(TMCNTSC_SEC|TMCNTSC_ALR|TMCNTSC_TCF|TMCNTSC_TCE)
+#define CONFIG_SYS_TMCNTSC	(TMCNTSC_SEC|TMCNTSC_ALR|TMCNTSC_TCF|TMCNTSC_TCE)
 
 /*-----------------------------------------------------------------------
  * PISCR - Periodic Interrupt Status and Control		 4-42
@@ -488,20 +487,20 @@
  * Clear Periodic Interrupt Status, Set 32KHz timersclk, and enable
  * Periodic timer
  */
-#define CFG_PISCR	(PISCR_PS|PISCR_PTF|PISCR_PTE)
+#define CONFIG_SYS_PISCR	(PISCR_PS|PISCR_PTF|PISCR_PTE)
 
 /*-----------------------------------------------------------------------
  * SCCR - System Clock Control					 9-8
  *-----------------------------------------------------------------------
  * Ensure DFBRG is Divide by 16
  */
-#define CFG_SCCR	(SCCR_DFBRG01)
+#define CONFIG_SYS_SCCR	(SCCR_DFBRG01)
 
 /*-----------------------------------------------------------------------
  * RCCR - RISC Controller Configuration				13-7
  *-----------------------------------------------------------------------
  */
-#define CFG_RCCR	0
+#define CONFIG_SYS_RCCR	0
 
 /*
  * Init Memory Controller:
@@ -534,10 +533,10 @@
  */
 
 /* 32 bit, read-write, GPCM on 60x bus */
-#define	CFG_BR0_PRELIM	((CFG_FLASH_BASE&BRx_BA_MSK)|\
+#define	CONFIG_SYS_BR0_PRELIM	((CONFIG_SYS_FLASH_BASE&BRx_BA_MSK)|\
 				BRx_PS_32|BRx_MS_GPCM_P|BRx_V)
 /* up to 32 Mb */
-#define	CFG_OR0_PRELIM	(MEG_TO_AM(32)|ORxG_CSNT|ORxG_ACS_DIV2|ORxG_SCY_10_CLK)
+#define	CONFIG_SYS_OR0_PRELIM	(MEG_TO_AM(32)|ORxG_CSNT|ORxG_ACS_DIV2|ORxG_SCY_10_CLK)
 
 /*
  * Bank 2 - SDRAM
@@ -557,13 +556,13 @@
  *  address lines to be configured to the required multiplexing scheme."
  */
 
-#define CFG_SDRAM_SIZE	64
+#define CONFIG_SYS_SDRAM_SIZE	64
 
 /* 64 bit, read-write, SDRAM on 60x bus */
-#define	CFG_BR2_PRELIM	((CFG_SDRAM_BASE&BRx_BA_MSK)|\
+#define	CONFIG_SYS_BR2_PRELIM	((CONFIG_SYS_SDRAM_BASE&BRx_BA_MSK)|\
 				BRx_PS_64|BRx_MS_SDRAM_P|BRx_V)
 /* 64 Mb, 4 int banks per dev, row start addr bit = A6, 12 row addr lines */
-#define	CFG_OR2_PRELIM	(MEG_TO_AM(CFG_SDRAM_SIZE)|\
+#define	CONFIG_SYS_OR2_PRELIM	(MEG_TO_AM(CONFIG_SYS_SDRAM_SIZE)|\
 				ORxS_BPD_4|ORxS_ROWST_PBI1_A6|ORxS_NUMR_12)
 
 /*
@@ -580,7 +579,7 @@
  * was written is 1 clock, CAS Latency is 2.
  */
 
-#define CFG_PSDMR	(PSDMR_PBI|PSDMR_SDAM_A16_IS_A5|\
+#define CONFIG_SYS_PSDMR	(PSDMR_PBI|PSDMR_SDAM_A16_IS_A5|\
 				PSDMR_BSMA_A14_A16|PSDMR_SDA10_PBI1_A7|\
 				PSDMR_RFRC_6_CLK|PSDMR_PRETOACT_2W|\
 				PSDMR_ACTTORW_2W|PSDMR_LDOTOPRE_1C|\
@@ -612,11 +611,11 @@
  */
 
 #ifdef DEBUG
-#define CFG_PSRT	39
-#define CFG_MPTPR	MPTPR_PTP_DIV8
+#define CONFIG_SYS_PSRT	39
+#define CONFIG_SYS_MPTPR	MPTPR_PTP_DIV8
 #else
-#define CFG_PSRT	31
-#define CFG_MPTPR	MPTPR_PTP_DIV32
+#define CONFIG_SYS_PSRT	31
+#define CONFIG_SYS_MPTPR	MPTPR_PTP_DIV32
 #endif
 
 /*
@@ -652,7 +651,7 @@
  */
 
 /* all the bank sizes must be a power of two, greater or equal to 32768 */
-#define FPGA_MAIN_CFG_BASE	(CFG_FPGA_BASE)
+#define FPGA_MAIN_CFG_BASE	(CONFIG_SYS_FPGA_BASE)
 #define FPGA_MAIN_CFG_SIZE	32768
 #define FPGA_MAIN_REG_BASE	(FPGA_MAIN_CFG_BASE + FPGA_MAIN_CFG_SIZE)
 #define FPGA_MAIN_REG_SIZE	32768
@@ -662,36 +661,36 @@
 #define FPGA_MEZZ_CFG_SIZE	32768
 
 /* 8 bit, read-write, UPMC */
-#define	CFG_BR3_PRELIM	(FPGA_MAIN_CFG_BASE|BRx_PS_8|BRx_MS_UPMC|BRx_V)
+#define	CONFIG_SYS_BR3_PRELIM	(FPGA_MAIN_CFG_BASE|BRx_PS_8|BRx_MS_UPMC|BRx_V)
 /* up to 32Kbyte, burst inhibit */
-#define	CFG_OR3_PRELIM	(P2SZ_TO_AM(FPGA_MAIN_CFG_SIZE)|ORxU_BI)
+#define	CONFIG_SYS_OR3_PRELIM	(P2SZ_TO_AM(FPGA_MAIN_CFG_SIZE)|ORxU_BI)
 
 /* 32 bit, read-write, GPCM */
-#define	CFG_BR4_PRELIM	(FPGA_MAIN_REG_BASE|BRx_PS_32|BRx_MS_GPCM_L|BRx_V)
+#define	CONFIG_SYS_BR4_PRELIM	(FPGA_MAIN_REG_BASE|BRx_PS_32|BRx_MS_GPCM_L|BRx_V)
 /* up to 32Kbyte */
-#define	CFG_OR4_PRELIM	(P2SZ_TO_AM(FPGA_MAIN_REG_SIZE))
+#define	CONFIG_SYS_OR4_PRELIM	(P2SZ_TO_AM(FPGA_MAIN_REG_SIZE))
 
 /* 32 bit, read-write, UPMB */
-#define	CFG_BR5_PRELIM	(FPGA_MAIN_PORT_BASE|BRx_PS_32|BRx_MS_UPMB|BRx_V)
+#define	CONFIG_SYS_BR5_PRELIM	(FPGA_MAIN_PORT_BASE|BRx_PS_32|BRx_MS_UPMB|BRx_V)
 /* up to 32Kbyte */
-#define	CFG_OR5_PRELIM	(P2SZ_TO_AM(FPGA_MAIN_PORT_SIZE)|ORxU_BI)
+#define	CONFIG_SYS_OR5_PRELIM	(P2SZ_TO_AM(FPGA_MAIN_PORT_SIZE)|ORxU_BI)
 
 /* 8 bit, write-only, UPMC */
-#define	CFG_BR6_PRELIM	(FPGA_MEZZ_CFG_BASE|BRx_PS_8|BRx_MS_UPMC|BRx_V)
+#define	CONFIG_SYS_BR6_PRELIM	(FPGA_MEZZ_CFG_BASE|BRx_PS_8|BRx_MS_UPMC|BRx_V)
 /* up to 32Kbyte, burst inhibit */
-#define	CFG_OR6_PRELIM	(P2SZ_TO_AM(FPGA_MEZZ_CFG_SIZE)|ORxU_BI)
+#define	CONFIG_SYS_OR6_PRELIM	(P2SZ_TO_AM(FPGA_MEZZ_CFG_SIZE)|ORxU_BI)
 
 /*-----------------------------------------------------------------------
  * MBMR - Machine B Mode					10-27
  *-----------------------------------------------------------------------
  */
-#define CFG_MBMR	(MxMR_BSEL|MxMR_OP_NORM)	/* XXX - needs more */
+#define CONFIG_SYS_MBMR	(MxMR_BSEL|MxMR_OP_NORM)	/* XXX - needs more */
 
 /*-----------------------------------------------------------------------
  * MCMR - Machine C Mode					10-27
  *-----------------------------------------------------------------------
  */
-#define CFG_MCMR	(MxMR_BSEL|MxMR_DSx_2_CYCL)	/* XXX - needs more */
+#define CONFIG_SYS_MCMR	(MxMR_BSEL|MxMR_DSx_2_CYCL)	/* XXX - needs more */
 
 /*
  * FPGA I/O Port/Bit information
diff --git a/include/configs/idmr.h b/include/configs/idmr.h
index 7c3ebad4b..1dd89f90c 100644
--- a/include/configs/idmr.h
+++ b/include/configs/idmr.h
@@ -45,9 +45,9 @@
 #define CONFIG_BOOTCOMMAND	"run net_nfs"
 #define CONFIG_BOOTDELAY	5
 #define CONFIG_MCFUART
-#define CFG_UART_PORT		(0)
+#define CONFIG_SYS_UART_PORT		(0)
 #define CONFIG_BAUDRATE		19200
-#define CFG_BAUDRATE_TABLE	{ 9600 , 19200 , 38400 , 57600, 115200 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600 , 19200 , 38400 , 57600, 115200 }
 #define CONFIG_ETHADDR		00:06:3b:01:41:55
 #define CONFIG_ETHPRIME
 #define CONFIG_IPADDR		192.168.30.1
@@ -115,40 +115,40 @@
  * Configuration for environment, which occupies third sector in flash.
  */
 #ifndef CONFIG_MONITOR_IS_IN_RAM
-#define CFG_ENV_ADDR		0xff820000
-#define CFG_ENV_SECT_SIZE	0x10000
-#define CFG_ENV_SIZE		0x2000
-#define CFG_ENV_IS_IN_FLASH
+#define CONFIG_ENV_ADDR		0xff820000
+#define CONFIG_ENV_SECT_SIZE	0x10000
+#define CONFIG_ENV_SIZE		0x2000
+#define CONFIG_ENV_IS_IN_FLASH
 #else /* CONFIG_MONITOR_IS_IN_RAM */
-#define CFG_ENV_OFFSET		0x4000
-#define CFG_ENV_SECT_SIZE	0x2000
-#define CFG_ENV_IS_IN_FLASH
+#define CONFIG_ENV_OFFSET		0x4000
+#define CONFIG_ENV_SECT_SIZE	0x2000
+#define CONFIG_ENV_IS_IN_FLASH
 #endif /* !CONFIG_MONITOR_IS_IN_RAM */
 
-#define	CFG_USE_PPCENV			/* Environment embedded in sect .ppcenv */
+#define	CONFIG_SYS_USE_PPCENV			/* Environment embedded in sect .ppcenv */
 
-#define CFG_PROMPT		"=> "
-#define CFG_LONGHELP				/* undef to save memory */
+#define CONFIG_SYS_PROMPT		"=> "
+#define CONFIG_SYS_LONGHELP				/* undef to save memory */
 
 #if defined(CONFIG_CMD_KGDB)
-#define CFG_CBSIZE		1024		/* Console I/O Buffer Size */
+#define CONFIG_SYS_CBSIZE		1024		/* Console I/O Buffer Size */
 #else
-#define CFG_CBSIZE		256		/* Console I/O Buffer Size */
+#define CONFIG_SYS_CBSIZE		256		/* Console I/O Buffer Size */
 #endif
 
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define CFG_MAXARGS		16		/* max number of command args */
-#define CFG_BARGSIZE		CFG_CBSIZE	/* Boot Argument Buffer Size */
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS		16		/* max number of command args */
+#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size */
 
-#define CFG_LOAD_ADDR		0x00100000
+#define CONFIG_SYS_LOAD_ADDR		0x00100000
 
-#define CFG_MEMTEST_START	0x400
-#define CFG_MEMTEST_END		0x380000
+#define CONFIG_SYS_MEMTEST_START	0x400
+#define CONFIG_SYS_MEMTEST_END		0x380000
 
-#define CFG_HZ			(50000000 / 64)
-#define CFG_CLK			100000000
+#define CONFIG_SYS_HZ			(50000000 / 64)
+#define CONFIG_SYS_CLK			100000000
 
-#define CFG_MBAR		0x40000000	/* Register Base Addrs */
+#define CONFIG_SYS_MBAR		0x40000000	/* Register Base Addrs */
 
 /*
  * Ethernet
@@ -158,74 +158,74 @@
 #	define CONFIG_NET_MULTI		1
 #	define CONFIG_MII		1
 #	define CONFIG_MII_INIT		1
-#	define CFG_DISCOVER_PHY
-#	define CFG_RX_ETH_BUFFER	8
-#	define CFG_FAULT_ECHO_LINK_DOWN
+#	define CONFIG_SYS_DISCOVER_PHY
+#	define CONFIG_SYS_RX_ETH_BUFFER	8
+#	define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
 
-#	define CFG_FEC0_PINMUX		0
-#	define CFG_FEC0_MIIBASE		CFG_FEC0_IOBASE
+#	define CONFIG_SYS_FEC0_PINMUX		0
+#	define CONFIG_SYS_FEC0_MIIBASE		CONFIG_SYS_FEC0_IOBASE
 #	define MCFFEC_TOUT_LOOP		50000
-/* If CFG_DISCOVER_PHY is not defined - hardcoded */
-#	ifndef CFG_DISCOVER_PHY
+/* If CONFIG_SYS_DISCOVER_PHY is not defined - hardcoded */
+#	ifndef CONFIG_SYS_DISCOVER_PHY
 #		define FECDUPLEX	FULL
 #		define FECSPEED		_100BASET
 #	else
-#		ifndef CFG_FAULT_ECHO_LINK_DOWN
-#			define CFG_FAULT_ECHO_LINK_DOWN
+#		ifndef CONFIG_SYS_FAULT_ECHO_LINK_DOWN
+#			define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
 #		endif
-#	endif			/* CFG_DISCOVER_PHY */
+#	endif			/* CONFIG_SYS_DISCOVER_PHY */
 #endif
 
 /*
  * Definitions for initial stack pointer and data area (in DPRAM)
  */
-#define CFG_INIT_RAM_ADDR	0x20000000
-#define CFG_INIT_RAM_END	0x1000	/* End of used area in internal SRAM */
-#define CFG_GBL_DATA_SIZE	64	/* size in bytes reserved for initial data */
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_INIT_RAM_ADDR	0x20000000
+#define CONFIG_SYS_INIT_RAM_END	0x1000	/* End of used area in internal SRAM */
+#define CONFIG_SYS_GBL_DATA_SIZE	64	/* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
 /*
  * Start addresses for the final memory configuration
  * (Set up by the startup code)
- * Please note that CFG_SDRAM_BASE _must_ start at 0
+ * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
  */
-#define CFG_SDRAM_BASE		0x00000000
-#define CFG_SDRAM_SIZE		16		/* SDRAM size in MB */
-#define CFG_FLASH_BASE		0xff800000
+#define CONFIG_SYS_SDRAM_BASE		0x00000000
+#define CONFIG_SYS_SDRAM_SIZE		16		/* SDRAM size in MB */
+#define CONFIG_SYS_FLASH_BASE		0xff800000
 
 #ifdef CONFIG_MONITOR_IS_IN_RAM
-#define CFG_MONITOR_BASE	0x20000
+#define CONFIG_SYS_MONITOR_BASE	0x20000
 #else /* !CONFIG_MONITOR_IS_IN_RAM */
-#define CFG_MONITOR_BASE	(CFG_FLASH_BASE + 0x400)
+#define CONFIG_SYS_MONITOR_BASE	(CONFIG_SYS_FLASH_BASE + 0x400)
 #endif /* CONFIG_MONITOR_IS_IN_RAM */
 
-#define CFG_MONITOR_LEN		0x20000
-#define CFG_MALLOC_LEN		(256 << 10)
-#define CFG_BOOTPARAMS_LEN	(64*1024)
+#define CONFIG_SYS_MONITOR_LEN		0x20000
+#define CONFIG_SYS_MALLOC_LEN		(256 << 10)
+#define CONFIG_SYS_BOOTPARAMS_LEN	(64*1024)
 
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization ??
  */
-#define CFG_BOOTMAPSZ		(CFG_SDRAM_BASE + (CFG_SDRAM_SIZE << 20))
+#define CONFIG_SYS_BOOTMAPSZ		(CONFIG_SYS_SDRAM_BASE + (CONFIG_SYS_SDRAM_SIZE << 20))
 
 /* FLASH organization */
-#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks */
-#define CFG_MAX_FLASH_SECT	128	/* max number of sectors on one chip */
-#define CFG_FLASH_ERASE_TOUT	1000
+#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks */
+#define CONFIG_SYS_MAX_FLASH_SECT	128	/* max number of sectors on one chip */
+#define CONFIG_SYS_FLASH_ERASE_TOUT	1000
 
-#define CFG_FLASH_SIZE		0x800000
+#define CONFIG_SYS_FLASH_SIZE		0x800000
 /*
- * #define CFG_FLASH_USE_BUFFER_WRITE	1
+ * #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE	1
  */
 
 /* Cache Configuration */
-#define CFG_CACHELINE_SIZE	16
+#define CONFIG_SYS_CACHELINE_SIZE	16
 
 /* Port configuration */
-#define CFG_FECI2C		0xF0
+#define CONFIG_SYS_FECI2C		0xF0
 
 
 /* Dynamic MTD partition support */
diff --git a/include/configs/impa7.h b/include/configs/impa7.h
index e9704fc9a..bb3c02e72 100644
--- a/include/configs/impa7.h
+++ b/include/configs/impa7.h
@@ -41,8 +41,8 @@
 /*
  * Size of malloc() pool
  */
-#define CFG_MALLOC_LEN		(CFG_ENV_SIZE + 128*1024)
-#define CFG_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
+#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + 128*1024)
+#define CONFIG_SYS_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
 
 /*
  * Hardware drivers
@@ -96,24 +96,24 @@
 /*
  * Miscellaneous configurable options
  */
-#define	CFG_LONGHELP				/* undef to save memory		*/
-#define	CFG_PROMPT		"impA7 # "		/* Monitor Command Prompt	*/
-#define	CFG_CBSIZE		256		/* Console I/O Buffer Size	*/
-#define	CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define	CFG_MAXARGS		16		/* max number of command args	*/
-#define CFG_BARGSIZE		CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+#define	CONFIG_SYS_LONGHELP				/* undef to save memory		*/
+#define	CONFIG_SYS_PROMPT		"impA7 # "		/* Monitor Command Prompt	*/
+#define	CONFIG_SYS_CBSIZE		256		/* Console I/O Buffer Size	*/
+#define	CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define	CONFIG_SYS_MAXARGS		16		/* max number of command args	*/
+#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
 
-#define CFG_MEMTEST_START	0xc0400000	/* memtest works on	*/
-#define CFG_MEMTEST_END		0xc0800000	/* 4 ... 8 MB in DRAM	*/
+#define CONFIG_SYS_MEMTEST_START	0xc0400000	/* memtest works on	*/
+#define CONFIG_SYS_MEMTEST_END		0xc0800000	/* 4 ... 8 MB in DRAM	*/
 
-#undef  CFG_CLKS_IN_HZ		/* everything, incl board info, in Hz */
+#undef  CONFIG_SYS_CLKS_IN_HZ		/* everything, incl board info, in Hz */
 
-#define	CFG_LOAD_ADDR		0xc1000000	/* default load address	*/
+#define	CONFIG_SYS_LOAD_ADDR		0xc1000000	/* default load address	*/
 
-#define	CFG_HZ			2000		/* decrementer freq: 2 kHz */
+#define	CONFIG_SYS_HZ			2000		/* decrementer freq: 2 kHz */
 
 						/* valid baudrates */
-#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
 
 /*-----------------------------------------------------------------------
  * Stack sizes
@@ -139,21 +139,21 @@
 #define PHYS_FLASH_2		0x10000000 /* Flash Bank #2 */
 #define PHYS_FLASH_SIZE		0x00800000 /* 16 MB */
 
-#define CFG_FLASH_BASE		PHYS_FLASH_1
+#define CONFIG_SYS_FLASH_BASE		PHYS_FLASH_1
 
 /*-----------------------------------------------------------------------
  * FLASH and environment organization
  */
-#define CFG_MAX_FLASH_BANKS	2	/* max number of memory banks		*/
-#define CFG_MAX_FLASH_SECT	71	/* max number of sectors on one chip	*/
+#define CONFIG_SYS_MAX_FLASH_BANKS	2	/* max number of memory banks		*/
+#define CONFIG_SYS_MAX_FLASH_SECT	71	/* max number of sectors on one chip	*/
 
 /* timeout values are in ticks */
-#define CFG_FLASH_ERASE_TOUT	(2*CFG_HZ) /* Timeout for Flash Erase */
-#define CFG_FLASH_WRITE_TOUT	(2*CFG_HZ) /* Timeout for Flash Write */
+#define CONFIG_SYS_FLASH_ERASE_TOUT	(2*CONFIG_SYS_HZ) /* Timeout for Flash Erase */
+#define CONFIG_SYS_FLASH_WRITE_TOUT	(2*CONFIG_SYS_HZ) /* Timeout for Flash Write */
 
-#define	CFG_ENV_IS_IN_FLASH	1
-#define CFG_ENV_ADDR		(PHYS_FLASH_1 + 0x1C000)	/* Addr of Environment Sector	*/
-#define CFG_ENV_SIZE		0x4000	/* Total Size of Environment Sector	*/
+#define	CONFIG_ENV_IS_IN_FLASH	1
+#define CONFIG_ENV_ADDR		(PHYS_FLASH_1 + 0x1C000)	/* Addr of Environment Sector	*/
+#define CONFIG_ENV_SIZE		0x4000	/* Total Size of Environment Sector	*/
 
 /*
  * JFFS2 partitions
diff --git a/include/configs/imx31_litekit.h b/include/configs/imx31_litekit.h
index c4763335b..6c150aed3 100644
--- a/include/configs/imx31_litekit.h
+++ b/include/configs/imx31_litekit.h
@@ -53,15 +53,15 @@
 /*
  * Size of malloc() pool
  */
-#define CFG_MALLOC_LEN		(CFG_ENV_SIZE + 128 * 1024)
-#define CFG_GBL_DATA_SIZE	128  /* size in bytes reserved for initial data */
+#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + 128 * 1024)
+#define CONFIG_SYS_GBL_DATA_SIZE	128  /* size in bytes reserved for initial data */
 
 /*
  * Hardware drivers
  */
 
 #define CONFIG_MX31_UART	1
-#define CFG_MX31_UART1		1
+#define CONFIG_SYS_MX31_UART1		1
 
 #define CONFIG_HARD_SPI		1
 #define CONFIG_MXC_SPI		1
@@ -69,12 +69,15 @@
 #define CONFIG_DEFAULT_SPI_MODE	(SPI_MODE_2 | SPI_CS_HIGH)
 
 #define CONFIG_RTC_MC13783	1
+/* MC13783 connected to CSPI2 and SS0 */
+#define CONFIG_MC13783_SPI_BUS	1
+#define CONFIG_MC13783_SPI_CS	0
 
 /* allow to overwrite serial and ethaddr */
 #define CONFIG_ENV_OVERWRITE
 #define CONFIG_CONS_INDEX	1
 #define CONFIG_BAUDRATE		115200
-#define CFG_BAUDRATE_TABLE	{9600, 19200, 38400, 57600, 115200}
+#define CONFIG_SYS_BAUDRATE_TABLE	{9600, 19200, 38400, 57600, 115200}
 
 /***********************************************************
  * Command definition
@@ -108,22 +111,20 @@
 /*
  * Miscellaneous configurable options
  */
-#define CFG_LONGHELP		/* undef to save memory */
-#define CFG_PROMPT		"uboot> "
-#define CFG_CBSIZE		256  /* Console I/O Buffer Size */
+#define CONFIG_SYS_LONGHELP		/* undef to save memory */
+#define CONFIG_SYS_PROMPT		"uboot> "
+#define CONFIG_SYS_CBSIZE		256  /* Console I/O Buffer Size */
 /* Print Buffer Size */
-#define CFG_PBSIZE		(CFG_CBSIZE+sizeof(CFG_PROMPT)+16)
-#define CFG_MAXARGS		16          /* max number of command args */
-#define CFG_BARGSIZE		CFG_CBSIZE  /* Boot Argument Buffer Size */
+#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
+#define CONFIG_SYS_MAXARGS		16          /* max number of command args */
+#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE  /* Boot Argument Buffer Size */
 
-#define CFG_MEMTEST_START	0  /* memtest works on */
-#define CFG_MEMTEST_END		0x10000
+#define CONFIG_SYS_MEMTEST_START	0  /* memtest works on */
+#define CONFIG_SYS_MEMTEST_END		0x10000
 
-#undef	CFG_CLKS_IN_HZ		/* everything, incl board info, in Hz */
+#define CONFIG_SYS_LOAD_ADDR		0 /* default load address */
 
-#define CFG_LOAD_ADDR		0 /* default load address */
-
-#define CFG_HZ			32000
+#define CONFIG_SYS_HZ			1000
 
 #define CONFIG_CMDLINE_EDITING	1
 
@@ -144,27 +145,27 @@
 /*-----------------------------------------------------------------------
  * FLASH and environment organization
  */
-#define CFG_FLASH_BASE		CS0_BASE
-#define CFG_MAX_FLASH_BANKS	1           /* max number of memory banks */
-#define CFG_MAX_FLASH_SECT	128	     /* max number of sectors on one chip */
-#define CFG_MONITOR_BASE	CFG_FLASH_BASE /* Monitor at beginning of flash */
+#define CONFIG_SYS_FLASH_BASE		CS0_BASE
+#define CONFIG_SYS_MAX_FLASH_BANKS	1           /* max number of memory banks */
+#define CONFIG_SYS_MAX_FLASH_SECT	128	     /* max number of sectors on one chip */
+#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_FLASH_BASE /* Monitor at beginning of flash */
 
-#define CFG_ENV_ADDR		(CFG_FLASH_BASE + 0x001f0000)
-#define	CFG_ENV_IS_IN_FLASH	1
-#define CFG_ENV_SECT_SIZE	(64 * 1024)
-#define CFG_ENV_SIZE		(64 * 1024)
+#define CONFIG_ENV_ADDR		(CONFIG_SYS_FLASH_BASE + 0x001f0000)
+#define	CONFIG_ENV_IS_IN_FLASH	1
+#define CONFIG_ENV_SECT_SIZE	(64 * 1024)
+#define CONFIG_ENV_SIZE		(64 * 1024)
 
 /*-----------------------------------------------------------------------
  * CFI FLASH driver setup
  */
-#define CFG_FLASH_CFI		1	/* Flash memory is CFI compliant */
+#define CONFIG_SYS_FLASH_CFI		1	/* Flash memory is CFI compliant */
 #define CONFIG_FLASH_CFI_DRIVER	1	/* Use drivers/cfi_flash.c */
-#define CFG_FLASH_USE_BUFFER_WRITE 1	/* Use buffered writes (~10x faster) */
-#define CFG_FLASH_PROTECTION	1	/* Use hardware sector protection */
+#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1	/* Use buffered writes (~10x faster) */
+#define CONFIG_SYS_FLASH_PROTECTION	1	/* Use hardware sector protection */
 
 /* timeout values are in ticks */
-#define CFG_FLASH_ERASE_TOUT	(100*CFG_HZ) /* Timeout for Flash Erase */
-#define CFG_FLASH_WRITE_TOUT	(100*CFG_HZ) /* Timeout for Flash Write */
+#define CONFIG_SYS_FLASH_ERASE_TOUT	(100*CONFIG_SYS_HZ) /* Timeout for Flash Erase */
+#define CONFIG_SYS_FLASH_WRITE_TOUT	(100*CONFIG_SYS_HZ) /* Timeout for Flash Write */
 
 /*
  * JFFS2 partitions
diff --git a/include/configs/imx31_phycore.h b/include/configs/imx31_phycore.h
index 237f3616a..f0d28ee05 100644
--- a/include/configs/imx31_phycore.h
+++ b/include/configs/imx31_phycore.h
@@ -51,8 +51,8 @@
 /*
  * Size of malloc() pool
  */
-#define CFG_MALLOC_LEN		(CFG_ENV_SIZE + 128 * 1024)
-#define CFG_GBL_DATA_SIZE	128  /* size in bytes reserved for initial data */
+#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + 128 * 1024)
+#define CONFIG_SYS_GBL_DATA_SIZE	128  /* size in bytes reserved for initial data */
 
 /*
  * Hardware drivers
@@ -60,18 +60,18 @@
 
 #define CONFIG_HARD_I2C		1
 #define CONFIG_I2C_MXC		1
-#define CFG_I2C_MX31_PORT2	1
-#define CFG_I2C_SPEED		100000
-#define CFG_I2C_SLAVE		0xfe
+#define CONFIG_SYS_I2C_MX31_PORT2	1
+#define CONFIG_SYS_I2C_SPEED		100000
+#define CONFIG_SYS_I2C_SLAVE		0xfe
 
 #define CONFIG_MX31_UART	1
-#define CFG_MX31_UART1		1
+#define CONFIG_SYS_MX31_UART1		1
 
 /* allow to overwrite serial and ethaddr */
 #define CONFIG_ENV_OVERWRITE
 #define CONFIG_CONS_INDEX	1
 #define CONFIG_BAUDRATE		115200
-#define CFG_BAUDRATE_TABLE	{9600, 19200, 38400, 57600, 115200}
+#define CONFIG_SYS_BAUDRATE_TABLE	{9600, 19200, 38400, 57600, 115200}
 
 /***********************************************************
  * Command definition
@@ -113,20 +113,20 @@
 /*
  * Miscellaneous configurable options
  */
-#define CFG_LONGHELP		/* undef to save memory */
-#define CFG_PROMPT		"uboot> "
-#define CFG_CBSIZE		256  /* Console I/O Buffer Size */
+#define CONFIG_SYS_LONGHELP		/* undef to save memory */
+#define CONFIG_SYS_PROMPT		"uboot> "
+#define CONFIG_SYS_CBSIZE		256  /* Console I/O Buffer Size */
 /* Print Buffer Size */
-#define CFG_PBSIZE		(CFG_CBSIZE+sizeof(CFG_PROMPT)+16)
-#define CFG_MAXARGS		16          /* max number of command args */
-#define CFG_BARGSIZE		CFG_CBSIZE  /* Boot Argument Buffer Size */
+#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
+#define CONFIG_SYS_MAXARGS		16          /* max number of command args */
+#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE  /* Boot Argument Buffer Size */
 
-#define CFG_MEMTEST_START	0  /* memtest works on */
-#define CFG_MEMTEST_END		0x10000
+#define CONFIG_SYS_MEMTEST_START	0  /* memtest works on */
+#define CONFIG_SYS_MEMTEST_END		0x10000
 
-#define CFG_LOAD_ADDR		0 /* default load address */
+#define CONFIG_SYS_LOAD_ADDR		0 /* default load address */
 
-#define CFG_HZ			32000
+#define CONFIG_SYS_HZ			1000
 
 #define CONFIG_CMDLINE_EDITING	1
 
@@ -147,30 +147,30 @@
 /*-----------------------------------------------------------------------
  * FLASH and environment organization
  */
-#define CFG_FLASH_BASE		0xa0000000
-#define CFG_MAX_FLASH_BANKS	1           /* max number of memory banks */
-#define CFG_MAX_FLASH_SECT	259	     /* max number of sectors on one chip */
-#define CFG_MONITOR_BASE	CFG_FLASH_BASE /* Monitor at beginning of flash */
-
-#define	CFG_ENV_IS_IN_EEPROM		1
-#define CFG_ENV_OFFSET			0x00	/* environment starts here     */
-#define CFG_ENV_SIZE			4096
-#define CFG_I2C_EEPROM_ADDR		0x52
-#define CFG_EEPROM_PAGE_WRITE_BITS	5	/* 5 bits = 32 octets          */
-#define CFG_EEPROM_PAGE_WRITE_DELAY_MS	10	/* between stop and start      */
-#define CFG_I2C_EEPROM_ADDR_LEN		2	/* length of byte address      */
+#define CONFIG_SYS_FLASH_BASE		0xa0000000
+#define CONFIG_SYS_MAX_FLASH_BANKS	1           /* max number of memory banks */
+#define CONFIG_SYS_MAX_FLASH_SECT	259	     /* max number of sectors on one chip */
+#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_FLASH_BASE /* Monitor at beginning of flash */
+
+#define	CONFIG_ENV_IS_IN_EEPROM		1
+#define CONFIG_ENV_OFFSET			0x00	/* environment starts here     */
+#define CONFIG_ENV_SIZE			4096
+#define CONFIG_SYS_I2C_EEPROM_ADDR		0x52
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS	5	/* 5 bits = 32 octets          */
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	10	/* between stop and start      */
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN		2	/* length of byte address      */
 
 /*-----------------------------------------------------------------------
  * CFI FLASH driver setup
  */
-#define CFG_FLASH_CFI		1	/* Flash memory is CFI compliant */
+#define CONFIG_SYS_FLASH_CFI		1	/* Flash memory is CFI compliant */
 #define CONFIG_FLASH_CFI_DRIVER	1	/* Use drivers/cfi_flash.c */
-#define CFG_FLASH_USE_BUFFER_WRITE 1	/* Use buffered writes (~10x faster) */
-#define CFG_FLASH_PROTECTION	1	/* Use hardware sector protection */
+#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1	/* Use buffered writes (~10x faster) */
+#define CONFIG_SYS_FLASH_PROTECTION	1	/* Use hardware sector protection */
 
 /* timeout values are in ticks */
-#define CFG_FLASH_ERASE_TOUT	(100*CFG_HZ) /* Timeout for Flash Erase */
-#define CFG_FLASH_WRITE_TOUT	(100*CFG_HZ) /* Timeout for Flash Write */
+#define CONFIG_SYS_FLASH_ERASE_TOUT	(100*CONFIG_SYS_HZ) /* Timeout for Flash Erase */
+#define CONFIG_SYS_FLASH_WRITE_TOUT	(100*CONFIG_SYS_HZ) /* Timeout for Flash Write */
 
 /*
  * JFFS2 partitions
diff --git a/include/configs/incaip.h b/include/configs/incaip.h
index 2e4ee66cf..a18ba8019 100644
--- a/include/configs/incaip.h
+++ b/include/configs/incaip.h
@@ -43,7 +43,7 @@
 #define CONFIG_BAUDRATE		115200
 
 /* valid baudrates */
-#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
 
 #define	CONFIG_TIMESTAMP		/* Print image info with timestamp */
 
@@ -108,53 +108,53 @@
 /*
  * Miscellaneous configurable options
  */
-#define	CFG_LONGHELP				/* undef to save memory      */
-#define	CFG_PROMPT		"INCA-IP # "	/* Monitor Command Prompt    */
-#define	CFG_CBSIZE		256		/* Console I/O Buffer Size   */
-#define	CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16)  /* Print Buffer Size */
-#define	CFG_MAXARGS		16		/* max number of command args*/
+#define	CONFIG_SYS_LONGHELP				/* undef to save memory      */
+#define	CONFIG_SYS_PROMPT		"INCA-IP # "	/* Monitor Command Prompt    */
+#define	CONFIG_SYS_CBSIZE		256		/* Console I/O Buffer Size   */
+#define	CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)  /* Print Buffer Size */
+#define	CONFIG_SYS_MAXARGS		16		/* max number of command args*/
 
-#define CFG_MALLOC_LEN		128*1024
+#define CONFIG_SYS_MALLOC_LEN		128*1024
 
-#define CFG_BOOTPARAMS_LEN	128*1024
+#define CONFIG_SYS_BOOTPARAMS_LEN	128*1024
 
-#define CFG_MIPS_TIMER_FREQ	(incaip_get_cpuclk() / 2)
+#define CONFIG_SYS_MIPS_TIMER_FREQ	(incaip_get_cpuclk() / 2)
 
-#define CFG_HZ			1000
+#define CONFIG_SYS_HZ			1000
 
-#define CFG_SDRAM_BASE		0x80000000
+#define CONFIG_SYS_SDRAM_BASE		0x80000000
 
-#define	CFG_LOAD_ADDR		0x80100000	/* default load address	*/
+#define	CONFIG_SYS_LOAD_ADDR		0x80100000	/* default load address	*/
 
-#define CFG_MEMTEST_START	0x80100000
-#define CFG_MEMTEST_END		0x80800000
+#define CONFIG_SYS_MEMTEST_START	0x80100000
+#define CONFIG_SYS_MEMTEST_END		0x80800000
 
 /*-----------------------------------------------------------------------
  * FLASH and environment organization
  */
-#define CFG_MAX_FLASH_BANKS	2	/* max number of memory banks */
-#define CFG_MAX_FLASH_SECT	(128)	/* max number of sectors on one chip */
+#define CONFIG_SYS_MAX_FLASH_BANKS	2	/* max number of memory banks */
+#define CONFIG_SYS_MAX_FLASH_SECT	(128)	/* max number of sectors on one chip */
 
 #define PHYS_FLASH_1		0xb0000000 /* Flash Bank #1 */
 #define PHYS_FLASH_2		0xb0800000 /* Flash Bank #2 */
 
 /* The following #defines are needed to get flash environment right */
-#define	CFG_MONITOR_BASE	TEXT_BASE
-#define	CFG_MONITOR_LEN		(192 << 10)
+#define	CONFIG_SYS_MONITOR_BASE	TEXT_BASE
+#define	CONFIG_SYS_MONITOR_LEN		(192 << 10)
 
-#define CFG_INIT_SP_OFFSET	0x400000
+#define CONFIG_SYS_INIT_SP_OFFSET	0x400000
 
-#define CFG_FLASH_BASE		PHYS_FLASH_1
+#define CONFIG_SYS_FLASH_BASE		PHYS_FLASH_1
 
 /* timeout values are in ticks */
-#define CFG_FLASH_ERASE_TOUT	(2 * CFG_HZ) /* Timeout for Flash Erase */
-#define CFG_FLASH_WRITE_TOUT	(2 * CFG_HZ) /* Timeout for Flash Write */
+#define CONFIG_SYS_FLASH_ERASE_TOUT	(2 * CONFIG_SYS_HZ) /* Timeout for Flash Erase */
+#define CONFIG_SYS_FLASH_WRITE_TOUT	(2 * CONFIG_SYS_HZ) /* Timeout for Flash Write */
 
-#define	CFG_ENV_IS_IN_FLASH	1
+#define	CONFIG_ENV_IS_IN_FLASH	1
 
 /* Address and size of Primary Environment Sector	*/
-#define CFG_ENV_ADDR		0xB0030000
-#define CFG_ENV_SIZE		0x10000
+#define CONFIG_ENV_ADDR		0xB0030000
+#define CONFIG_ENV_SIZE		0x10000
 
 #define CONFIG_FLASH_16BIT
 
@@ -188,8 +188,8 @@
 /*-----------------------------------------------------------------------
  * Cache Configuration
  */
-#define CFG_DCACHE_SIZE		4096
-#define CFG_ICACHE_SIZE		4096
-#define CFG_CACHELINE_SIZE	16
+#define CONFIG_SYS_DCACHE_SIZE		4096
+#define CONFIG_SYS_ICACHE_SIZE		4096
+#define CONFIG_SYS_CACHELINE_SIZE	16
 
 #endif	/* __CONFIG_H */
diff --git a/include/configs/inka4x0.h b/include/configs/inka4x0.h
index efa2802fe..405234cc8 100644
--- a/include/configs/inka4x0.h
+++ b/include/configs/inka4x0.h
@@ -33,7 +33,7 @@
 #define CONFIG_MPC5200		1	/* (more precisely an MPC5200 CPU)	*/
 #define CONFIG_INKA4X0		1	/* INKA4x0 board			*/
 
-#define CFG_MPC5XXX_CLKIN	33000000 /* ... running at 33.000000MHz		*/
+#define CONFIG_SYS_MPC5XXX_CLKIN	33000000 /* ... running at 33.000000MHz		*/
 
 #define BOOTFLAG_COLD		0x01	/* Normal Power-On: Boot from FLASH	*/
 #define BOOTFLAG_WARM		0x02	/* Software reboot			*/
@@ -47,7 +47,7 @@
  */
 #define CONFIG_PSC_CONSOLE	1	/* console is on PSC1	*/
 #define CONFIG_BAUDRATE		115200	/* ... at 115200 bps	*/
-#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
 
 /*
  * PCI Mapping:
@@ -67,7 +67,7 @@
 #define CONFIG_PCI_IO_PHYS	CONFIG_PCI_IO_BUS
 #define CONFIG_PCI_IO_SIZE	0x01000000
 
-#define CFG_XLB_PIPELINING	1
+#define CONFIG_SYS_XLB_PIPELINING	1
 
 /* Partitions */
 #define CONFIG_MAC_PARTITION
@@ -102,7 +102,7 @@
 #define	CONFIG_TIMESTAMP	1	/* Print image info with timestamp */
 
 #if (TEXT_BASE == 0xFFE00000)		/* Boot low */
-#   define CFG_LOWBOOT		1
+#   define CONFIG_SYS_LOWBOOT		1
 #endif
 
 /*
@@ -154,36 +154,36 @@
 /*
  * IPB Bus clocking configuration.
  */
-#define CFG_IPBCLK_EQUALS_XLBCLK		/* define for 133MHz speed */
+#define CONFIG_SYS_IPBCLK_EQUALS_XLBCLK		/* define for 133MHz speed */
 
 /*
  * Flash configuration
  */
-#define CFG_FLASH_CFI		1	/* Flash is CFI conformant */
+#define CONFIG_SYS_FLASH_CFI		1	/* Flash is CFI conformant */
 #define CONFIG_FLASH_CFI_DRIVER	1
-#define CFG_FLASH_BASE		0xffe00000
-#define CFG_FLASH_SIZE		0x00200000
-#define CFG_MAX_FLASH_BANKS	1	/* max num of memory banks */
-#define CFG_FLASH_BANKS_LIST	{ CFG_FLASH_BASE }
-#define CFG_MAX_FLASH_SECT	128	/* max num of sects on one chip */
-#define CFG_FLASH_USE_BUFFER_WRITE 1	/* use buffered writes (20x faster) */
+#define CONFIG_SYS_FLASH_BASE		0xffe00000
+#define CONFIG_SYS_FLASH_SIZE		0x00200000
+#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max num of memory banks */
+#define CONFIG_SYS_FLASH_BANKS_LIST	{ CONFIG_SYS_FLASH_BASE }
+#define CONFIG_SYS_MAX_FLASH_SECT	128	/* max num of sects on one chip */
+#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1	/* use buffered writes (20x faster) */
 
 /*
  * Environment settings
  */
-#define CFG_ENV_IS_IN_FLASH	1
-#define CFG_ENV_ADDR		(CFG_FLASH_BASE + 0x4000)
-#define CFG_ENV_SIZE		0x2000
-#define CFG_ENV_SECT_SIZE	0x2000
+#define CONFIG_ENV_IS_IN_FLASH	1
+#define CONFIG_ENV_ADDR		(CONFIG_SYS_FLASH_BASE + 0x4000)
+#define CONFIG_ENV_SIZE		0x2000
+#define CONFIG_ENV_SECT_SIZE	0x2000
 #define CONFIG_ENV_OVERWRITE	1
-#define CFG_USE_PPCENV			/* Environment embedded in sect .ppcenv */
+#define CONFIG_SYS_USE_PPCENV			/* Environment embedded in sect .ppcenv */
 
 /*
  * Memory map
  */
-#define CFG_MBAR		0xF0000000
-#define CFG_SDRAM_BASE		0x00000000
-#define CFG_DEFAULT_MBAR	0x80000000
+#define CONFIG_SYS_MBAR		0xF0000000
+#define CONFIG_SYS_SDRAM_BASE		0x00000000
+#define CONFIG_SYS_DEFAULT_MBAR	0x80000000
 
 /*
  * SDRAM controller configuration
@@ -195,27 +195,27 @@
 #define CONFIG_DDR_K4H511638C
 
 /* Use ON-Chip SRAM until RAM will be available */
-#define CFG_INIT_RAM_ADDR	MPC5XXX_SRAM
+#define CONFIG_SYS_INIT_RAM_ADDR	MPC5XXX_SRAM
 #ifdef CONFIG_POST
 /* preserve space for the post_word at end of on-chip SRAM */
-#define CFG_INIT_RAM_END	MPC5XXX_SRAM_POST_SIZE
+#define CONFIG_SYS_INIT_RAM_END	MPC5XXX_SRAM_POST_SIZE
 #else
-#define CFG_INIT_RAM_END	MPC5XXX_SRAM_SIZE
+#define CONFIG_SYS_INIT_RAM_END	MPC5XXX_SRAM_SIZE
 #endif
 
 
-#define CFG_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
-#define CFG_MONITOR_BASE    TEXT_BASE
-#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
-#   define CFG_RAMBOOT		1
+#define CONFIG_SYS_MONITOR_BASE    TEXT_BASE
+#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
+#   define CONFIG_SYS_RAMBOOT		1
 #endif
 
-#define CFG_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor	*/
-#define CFG_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/
-#define CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
+#define CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor	*/
+#define CONFIG_SYS_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/
+#define CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
 
 /*
  * Ethernet configuration
@@ -241,7 +241,7 @@
  * use PSC6_1 and PSC6_3 as GPIO: Bits 9:11 (mask: 0x07000000):
  *	011 -> PSC6 could not be used as UART or CODEC. IrDA still possible.
  */
-#define CFG_GPS_PORT_CONFIG	0x01001004
+#define CONFIG_SYS_GPS_PORT_CONFIG	0x01001004
 
 /*
  * RTC configuration
@@ -251,31 +251,31 @@
 /*
  * Miscellaneous configurable options
  */
-#define CFG_LONGHELP			/* undef to save memory	    */
-#define CFG_PROMPT		"=> "	/* Monitor Command Prompt   */
+#define CONFIG_SYS_LONGHELP			/* undef to save memory	    */
+#define CONFIG_SYS_PROMPT		"=> "	/* Monitor Command Prompt   */
 #if defined(CONFIG_CMD_KGDB)
-#define CFG_CBSIZE		1024	/* Console I/O Buffer Size  */
+#define CONFIG_SYS_CBSIZE		1024	/* Console I/O Buffer Size  */
 #else
-#define CFG_CBSIZE		256	/* Console I/O Buffer Size  */
+#define CONFIG_SYS_CBSIZE		256	/* Console I/O Buffer Size  */
 #endif
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define CFG_MAXARGS		16	/* max number of command args	*/
-#define CFG_BARGSIZE		CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS		16	/* max number of command args	*/
+#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
 
-#define CFG_CACHELINE_SIZE	32	/* For MPC5xxx CPUs			*/
+#define CONFIG_SYS_CACHELINE_SIZE	32	/* For MPC5xxx CPUs			*/
 #if defined(CONFIG_CMD_KGDB)
-#  define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value	*/
+#  define CONFIG_SYS_CACHELINE_SHIFT	5	/* log base 2 of the above value	*/
 #endif
 
 /* Enable an alternate, more extensive memory test */
-#define CFG_ALT_MEMTEST
+#define CONFIG_SYS_ALT_MEMTEST
 
-#define CFG_MEMTEST_START	0x00100000	/* memtest works on */
-#define CFG_MEMTEST_END		0x00f00000	/* 1 ... 15 MB in DRAM	*/
+#define CONFIG_SYS_MEMTEST_START	0x00100000	/* memtest works on */
+#define CONFIG_SYS_MEMTEST_END		0x00f00000	/* 1 ... 15 MB in DRAM	*/
 
-#define CFG_LOAD_ADDR		0x100000	/* default load address */
+#define CONFIG_SYS_LOAD_ADDR		0x100000	/* default load address */
 
-#define CFG_HZ			1000	/* decrementer freq: 1 ms ticks */
+#define CONFIG_SYS_HZ			1000	/* decrementer freq: 1 ms ticks */
 
 /*
  * Enable loopw command.
@@ -286,36 +286,36 @@
  * Various low-level settings
  */
 #if defined(CONFIG_MPC5200)
-#define CFG_HID0_INIT		HID0_ICE | HID0_ICFI
-#define CFG_HID0_FINAL		HID0_ICE
+#define CONFIG_SYS_HID0_INIT		HID0_ICE | HID0_ICFI
+#define CONFIG_SYS_HID0_FINAL		HID0_ICE
 #else
-#define CFG_HID0_INIT		0
-#define CFG_HID0_FINAL		0
+#define CONFIG_SYS_HID0_INIT		0
+#define CONFIG_SYS_HID0_FINAL		0
 #endif
 
-#define CFG_BOOTCS_START	CFG_FLASH_BASE
-#define CFG_BOOTCS_SIZE		CFG_FLASH_SIZE
-#define CFG_BOOTCS_CFG		0x00087800 /* for pci_clk  = 66 MHz */
-#define CFG_CS0_START		CFG_FLASH_BASE
-#define CFG_CS0_SIZE		CFG_FLASH_SIZE
+#define CONFIG_SYS_BOOTCS_START	CONFIG_SYS_FLASH_BASE
+#define CONFIG_SYS_BOOTCS_SIZE		CONFIG_SYS_FLASH_SIZE
+#define CONFIG_SYS_BOOTCS_CFG		0x00087800 /* for pci_clk  = 66 MHz */
+#define CONFIG_SYS_CS0_START		CONFIG_SYS_FLASH_BASE
+#define CONFIG_SYS_CS0_SIZE		CONFIG_SYS_FLASH_SIZE
 
 /* 32Mbit SRAM @0x30000000 */
-#define CFG_CS1_START		0x30000000
-#define CFG_CS1_SIZE		0x00400000
-#define CFG_CS1_CFG		0x31800 /* for pci_clk = 33 MHz */
+#define CONFIG_SYS_CS1_START		0x30000000
+#define CONFIG_SYS_CS1_SIZE		0x00400000
+#define CONFIG_SYS_CS1_CFG		0x31800 /* for pci_clk = 33 MHz */
 
 /* 2 quad UART @0x80000000 (MBAR is relocated to 0xF0000000) */
-#define CFG_CS2_START		0x80000000
-#define CFG_CS2_SIZE		0x0001000
-#define CFG_CS2_CFG		0x21800  /* for pci_clk = 33 MHz */
+#define CONFIG_SYS_CS2_START		0x80000000
+#define CONFIG_SYS_CS2_SIZE		0x0001000
+#define CONFIG_SYS_CS2_CFG		0x21800  /* for pci_clk = 33 MHz */
 
 /* GPIO in @0x30400000 */
-#define CFG_CS3_START		0x30400000
-#define CFG_CS3_SIZE		0x00100000
-#define CFG_CS3_CFG		0x31800 /* for pci_clk = 33 MHz */
+#define CONFIG_SYS_CS3_START		0x30400000
+#define CONFIG_SYS_CS3_SIZE		0x00100000
+#define CONFIG_SYS_CS3_CFG		0x31800 /* for pci_clk = 33 MHz */
 
-#define CFG_CS_BURST		0x00000000
-#define CFG_CS_DEADCYCLE	0x33333333
+#define CONFIG_SYS_CS_BURST		0x00000000
+#define CONFIG_SYS_CS_DEADCYCLE	0x33333333
 
 /*-----------------------------------------------------------------------
  * USB stuff
@@ -339,18 +339,18 @@
 #define	CONFIG_IDE_RESET		/* reset for ide supported	*/
 #define CONFIG_IDE_PREINIT
 
-#define CFG_IDE_MAXBUS		1	/* max. 1 IDE bus		*/
-#define CFG_IDE_MAXDEVICE	2	/* max. 1 drive per IDE bus	*/
+#define CONFIG_SYS_IDE_MAXBUS		1	/* max. 1 IDE bus		*/
+#define CONFIG_SYS_IDE_MAXDEVICE	2	/* max. 1 drive per IDE bus	*/
 
-#define CFG_ATA_IDE0_OFFSET	0x0000
-#define CFG_ATA_BASE_ADDR	MPC5XXX_ATA
-#define CFG_ATA_DATA_OFFSET	0x0060	/* Offset for data I/O		*/
-#define CFG_ATA_REG_OFFSET (CFG_ATA_DATA_OFFSET) /* Offset for normal register accesses */
-#define CFG_ATA_ALT_OFFSET	0x005C	/* Offset for alternate registers */
-#define CFG_ATA_STRIDE          4	/* Interval between registers	*/
+#define CONFIG_SYS_ATA_IDE0_OFFSET	0x0000
+#define CONFIG_SYS_ATA_BASE_ADDR	MPC5XXX_ATA
+#define CONFIG_SYS_ATA_DATA_OFFSET	0x0060	/* Offset for data I/O		*/
+#define CONFIG_SYS_ATA_REG_OFFSET (CONFIG_SYS_ATA_DATA_OFFSET) /* Offset for normal register accesses */
+#define CONFIG_SYS_ATA_ALT_OFFSET	0x005C	/* Offset for alternate registers */
+#define CONFIG_SYS_ATA_STRIDE          4	/* Interval between registers	*/
 
 #define CONFIG_ATAPI            1
 
-#define CFG_BRIGHTNESS          0xFF	/* LCD Default Brightness (255 = off) */
+#define CONFIG_SYS_BRIGHTNESS          0xFF	/* LCD Default Brightness (255 = off) */
 
 #endif /* __CONFIG_H */
diff --git a/include/configs/innokom.h b/include/configs/innokom.h
index 2b6505267..1b05b8058 100644
--- a/include/configs/innokom.h
+++ b/include/configs/innokom.h
@@ -102,54 +102,54 @@
 /*
  * Size of malloc() pool
  */
-#define CFG_MALLOC_LEN		(256*1024)
-#define CFG_GBL_DATA_SIZE	128		/* size in bytes reserved for initial data */
+#define CONFIG_SYS_MALLOC_LEN		(256*1024)
+#define CONFIG_SYS_GBL_DATA_SIZE	128		/* size in bytes reserved for initial data */
 
-#define CFG_LONGHELP				/* undef to save memory         */
-#define CFG_PROMPT		"uboot> "	/* Monitor Command Prompt       */
-#define CFG_CBSIZE		256		/* Console I/O Buffer Size      */
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define CFG_MAXARGS		16		/* max number of command args   */
-#define CFG_BARGSIZE		CFG_CBSIZE	/* Boot Argument Buffer Size    */
+#define CONFIG_SYS_LONGHELP				/* undef to save memory         */
+#define CONFIG_SYS_PROMPT		"uboot> "	/* Monitor Command Prompt       */
+#define CONFIG_SYS_CBSIZE		256		/* Console I/O Buffer Size      */
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS		16		/* max number of command args   */
+#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size    */
 
-#define CFG_MEMTEST_START	0xa0400000      /* memtest works on     */
-#define CFG_MEMTEST_END         0xa0800000      /* 4 ... 8 MB in DRAM   */
+#define CONFIG_SYS_MEMTEST_START	0xa0400000      /* memtest works on     */
+#define CONFIG_SYS_MEMTEST_END         0xa0800000      /* 4 ... 8 MB in DRAM   */
 
-#undef  CFG_CLKS_IN_HZ          /* everything, incl board info, in Hz */
+#undef  CONFIG_SYS_CLKS_IN_HZ          /* everything, incl board info, in Hz */
 
-#define CFG_LOAD_ADDR           0xa3000000      /* load kernel to this address   */
+#define CONFIG_SYS_LOAD_ADDR           0xa3000000      /* load kernel to this address   */
 
-#define CFG_HZ                  3686400         /* incrementer freq: 3.6864 MHz */
+#define CONFIG_SYS_HZ                  3686400         /* incrementer freq: 3.6864 MHz */
 						/* RS: the oscillator is actually 3680130?? */
 
-#define CFG_CPUSPEED            0x141           /* set core clock to 200/200/100 MHz */
+#define CONFIG_SYS_CPUSPEED            0x141           /* set core clock to 200/200/100 MHz */
 						/* 0101000001 */
 						/*      ^^^^^ Memory Speed 99.53 MHz         */
 						/*    ^^      Run Mode Speed = 2x Mem Speed  */
 						/* ^^         Turbo Mode Sp. = 1x Run M. Sp. */
 
-#define CFG_MONITOR_LEN		0x20000		/* 128 KiB */
+#define CONFIG_SYS_MONITOR_LEN		0x20000		/* 128 KiB */
 
 						/* valid baudrates */
-#define CFG_BAUDRATE_TABLE      { 9600, 19200, 38400, 57600, 115200 }
+#define CONFIG_SYS_BAUDRATE_TABLE      { 9600, 19200, 38400, 57600, 115200 }
 
 /*
  * I2C bus
  */
 #define CONFIG_HARD_I2C			1
-#define CFG_I2C_SPEED			50000
-#define CFG_I2C_SLAVE			0xfe
+#define CONFIG_SYS_I2C_SPEED			50000
+#define CONFIG_SYS_I2C_SLAVE			0xfe
 
-#define CFG_ENV_IS_IN_EEPROM		1
+#define CONFIG_ENV_IS_IN_EEPROM		1
 
-#define CFG_ENV_OFFSET			0x00	/* environment starts here  */
-#define CFG_ENV_SIZE			1024	/* 1 KiB                    */
-#define CFG_I2C_EEPROM_ADDR		0x50	/* A0 = 0 (hardwired)       */
-#define CFG_EEPROM_PAGE_WRITE_BITS	5	/* 5 bits = 32 octets       */
-#define CFG_EEPROM_PAGE_WRITE_DELAY_MS	15	/* between stop and start   */
-#define CFG_I2C_EEPROM_ADDR_LEN		2	/* length of address        */
-#define CFG_EEPROM_SIZE			4096	/* size in bytes            */
-#define CFG_I2C_INIT_BOARD		1	/* board has it's own init  */
+#define CONFIG_ENV_OFFSET			0x00	/* environment starts here  */
+#define CONFIG_ENV_SIZE			1024	/* 1 KiB                    */
+#define CONFIG_SYS_I2C_EEPROM_ADDR		0x50	/* A0 = 0 (hardwired)       */
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS	5	/* 5 bits = 32 octets       */
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	15	/* between stop and start   */
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN		2	/* length of address        */
+#define CONFIG_SYS_EEPROM_SIZE			4096	/* size in bytes            */
+#define CONFIG_SYS_I2C_INIT_BOARD		1	/* board has it's own init  */
 
 /*
  * SMSC91C111 Network Card
@@ -183,10 +183,10 @@
 #define PHYS_FLASH_1		0x00000000	/* Flash Bank #1            */
 #define PHYS_FLASH_SIZE		0x01000000	/* 16 MB                    */
 
-#define CFG_DRAM_BASE		0xa0000000	/* RAM starts here          */
-#define CFG_DRAM_SIZE		0x04000000
+#define CONFIG_SYS_DRAM_BASE		0xa0000000	/* RAM starts here          */
+#define CONFIG_SYS_DRAM_SIZE		0x04000000
 
-#define CFG_FLASH_BASE          PHYS_FLASH_1
+#define CONFIG_SYS_FLASH_BASE          PHYS_FLASH_1
 
 /*
  * JFFS2 partitions
@@ -242,9 +242,9 @@
  * GP79 == nCS3      is 1
  * GP80 == nCS4      is 1
  */
-#define CFG_GPSR0_VAL       0x03008000
-#define CFG_GPSR1_VAL       0xC0028282
-#define CFG_GPSR2_VAL       0x0001C000
+#define CONFIG_SYS_GPSR0_VAL       0x03008000
+#define CONFIG_SYS_GPSR1_VAL       0xC0028282
+#define CONFIG_SYS_GPSR2_VAL       0x0001C000
 
 /* GP02 == DON_RST   is 0
  * GP23 == SCLK      is 0
@@ -253,9 +253,9 @@
  * GP61 == LED_A     is 0
  * GP73 == SWUPD_LED is 0
  */
-#define CFG_GPCR0_VAL       0x00800004
-#define CFG_GPCR1_VAL       0x30002000
-#define CFG_GPCR2_VAL       0x00000100
+#define CONFIG_SYS_GPCR0_VAL       0x00800004
+#define CONFIG_SYS_GPCR1_VAL       0x30002000
+#define CONFIG_SYS_GPCR2_VAL       0x00000100
 
 /* GP00 == DON_READY is input
  * GP01 == DON_OK    is input
@@ -300,9 +300,9 @@
  * GP79 == nCS3      is output
  * GP80 == nCS4      is output
  */
-#define CFG_GPDR0_VAL       0x03808004
-#define CFG_GPDR1_VAL       0xF002A282
-#define CFG_GPDR2_VAL       0x0001C200
+#define CONFIG_SYS_GPDR0_VAL       0x03808004
+#define CONFIG_SYS_GPDR1_VAL       0xF002A282
+#define CONFIG_SYS_GPDR2_VAL       0x0001C200
 
 /* GP15 == nCS1  is AF10
  * GP18 == RDY   is AF01
@@ -322,12 +322,12 @@
  * GP79 == nCS3  is AF10
  * GP80 == nCS4  is AF10
  */
-#define CFG_GAFR0_L_VAL     0x80000000
-#define CFG_GAFR0_U_VAL     0x001A8010
-#define CFG_GAFR1_L_VAL     0x60088058
-#define CFG_GAFR1_U_VAL     0x00000008
-#define CFG_GAFR2_L_VAL     0xA0000000
-#define CFG_GAFR2_U_VAL     0x00000002
+#define CONFIG_SYS_GAFR0_L_VAL     0x80000000
+#define CONFIG_SYS_GAFR0_U_VAL     0x001A8010
+#define CONFIG_SYS_GAFR1_L_VAL     0x60088058
+#define CONFIG_SYS_GAFR1_U_VAL     0x00000008
+#define CONFIG_SYS_GAFR2_L_VAL     0xA0000000
+#define CONFIG_SYS_GAFR2_U_VAL     0x00000002
 
 
 /* FIXME: set GPIO_RER/FER */
@@ -338,7 +338,7 @@
  * BFS = 1
  * SSS = 1
  */
-#define CFG_PSSR_VAL		0x37
+#define CONFIG_SYS_PSSR_VAL		0x37
 
 /*
  * Memory settings
@@ -359,7 +359,7 @@
  * [03]    1    - 16 Bit bus width
  * [02:00] 000  - nonburst RAM or FLASH
  */
-#define CFG_MSC0_VAL		0x25b825b8 /* flash banks                   */
+#define CONFIG_SYS_MSC0_VAL		0x25b825b8 /* flash banks                   */
 
 /* This is the configuration for nCS2/3 -> TDM-Switch, DSP
  * configuration for nCS3: DSP
@@ -377,7 +377,7 @@
  * [03]    1    - 16 Bit bus width
  * [02:00] 100  - variable latency I/O
  */
-#define CFG_MSC1_VAL		0x123C593C /* TDM switch, DSP               */
+#define CONFIG_SYS_MSC1_VAL		0x123C593C /* TDM switch, DSP               */
 
 /* This is the configuration for nCS4/5 -> ExtBus, LAN Controller
  *
@@ -396,7 +396,7 @@
  * [03]    1    - 16 Bit bus width
  * [02:00] 100  - variable latency I/O
  */
-#define CFG_MSC2_VAL		0x123C6CDC /* extra bus, LAN controller     */
+#define CONFIG_SYS_MSC2_VAL		0x123C6CDC /* extra bus, LAN controller     */
 
 /* MDCNFG: SDRAM Configuration Register
  *
@@ -424,7 +424,7 @@
  * [00]      1   - enable  SDRAM partition 0
  */
 /* use the configuration above but disable partition 0 */
-#define CFG_MDCNFG_VAL		0x000019c8
+#define CONFIG_SYS_MDCNFG_VAL		0x000019c8
 
 /* MDREFR: SDRAM Refresh Control Register
  *
@@ -445,7 +445,7 @@
  * [12]    1     - E0PIN: disable SDCKE0
  * [11:00] 000000011000 - (64ms/8192)*MemClkFreq/32 = 24
  */
-#define CFG_MDREFR_VAL		0x0081D018
+#define CONFIG_SYS_MDREFR_VAL		0x0081D018
 
 /* MDMRS: Mode Register Set Configuration Register
  *
@@ -460,18 +460,18 @@
  * [03]      0       - MDADD0: SDRAM0/1 burst Type. Fixed to sequential.
  * [02:00]   010     - MDBL0:  SDRAM0/1 burst Length. Fixed to 4.
  */
-#define CFG_MDMRS_VAL		0x00020022
+#define CONFIG_SYS_MDMRS_VAL		0x00020022
 
 /*
  * PCMCIA and CF Interfaces
  */
-#define CFG_MECR_VAL		0x00000000
-#define CFG_MCMEM0_VAL		0x00000000
-#define CFG_MCMEM1_VAL		0x00000000
-#define CFG_MCATT0_VAL		0x00000000
-#define CFG_MCATT1_VAL		0x00000000
-#define CFG_MCIO0_VAL		0x00000000
-#define CFG_MCIO1_VAL		0x00000000
+#define CONFIG_SYS_MECR_VAL		0x00000000
+#define CONFIG_SYS_MCMEM0_VAL		0x00000000
+#define CONFIG_SYS_MCMEM1_VAL		0x00000000
+#define CONFIG_SYS_MCATT0_VAL		0x00000000
+#define CONFIG_SYS_MCATT1_VAL		0x00000000
+#define CONFIG_SYS_MCIO0_VAL		0x00000000
+#define CONFIG_SYS_MCIO1_VAL		0x00000000
 
 /*
 #define CSB226_USER_LED0	0x00000008
@@ -482,11 +482,11 @@
 /*
  * FLASH and environment organization
  */
-#define CFG_MAX_FLASH_BANKS     1	/* max number of memory banks       */
-#define CFG_MAX_FLASH_SECT	128	/* max number of sect. on one chip  */
+#define CONFIG_SYS_MAX_FLASH_BANKS     1	/* max number of memory banks       */
+#define CONFIG_SYS_MAX_FLASH_SECT	128	/* max number of sect. on one chip  */
 
 /* timeout values are in ticks */
-#define CFG_FLASH_ERASE_TOUT    (2*CFG_HZ) /* Timeout for Flash Erase       */
-#define CFG_FLASH_WRITE_TOUT    (2*CFG_HZ) /* Timeout for Flash Write       */
+#define CONFIG_SYS_FLASH_ERASE_TOUT    (2*CONFIG_SYS_HZ) /* Timeout for Flash Erase       */
+#define CONFIG_SYS_FLASH_WRITE_TOUT    (2*CONFIG_SYS_HZ) /* Timeout for Flash Write       */
 
 #endif  /* __CONFIG_H */
diff --git a/include/configs/integratorap.h b/include/configs/integratorap.h
index 1452bf2c4..6ce3b4dc0 100644
--- a/include/configs/integratorap.h
+++ b/include/configs/integratorap.h
@@ -34,11 +34,11 @@
  * High Level Configuration Options
  * (easy to change)
  */
-#define CFG_MEMTEST_START	0x100000
-#define CFG_MEMTEST_END		0x10000000
-#define CFG_HZ			1000
-#define CFG_HZ_CLOCK		24000000	/* Timer 1 is clocked at 24Mhz */
-#define CFG_TIMERBASE		0x13000100	/* Timer1		       */
+#define CONFIG_SYS_MEMTEST_START	0x100000
+#define CONFIG_SYS_MEMTEST_END		0x10000000
+#define CONFIG_SYS_HZ			1000
+#define CONFIG_SYS_HZ_CLOCK		24000000	/* Timer 1 is clocked at 24Mhz */
+#define CONFIG_SYS_TIMERBASE		0x13000100	/* Timer1		       */
 
 #define CONFIG_CMDLINE_TAG	1	/* enable passing of ATAGs  */
 #define CONFIG_SETUP_MEMORY_TAGS	1
@@ -52,19 +52,19 @@
 /*
  * Size of malloc() pool
  */
-#define CFG_MALLOC_LEN	(CFG_ENV_SIZE + 128*1024)
-#define CFG_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
+#define CONFIG_SYS_MALLOC_LEN	(CONFIG_ENV_SIZE + 128*1024)
+#define CONFIG_SYS_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
 
 /*
  * PL010 Configuration
  */
-#define CFG_PL010_SERIAL
+#define CONFIG_PL010_SERIAL
 #define CONFIG_CONS_INDEX	0
 #define CONFIG_BAUDRATE		38400
-#define CONFIG_PL01x_PORTS	{ (void *) (CFG_SERIAL0), (void *) (CFG_SERIAL1) }
-#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
-#define CFG_SERIAL0		0x16000000
-#define CFG_SERIAL1		0x17000000
+#define CONFIG_PL01x_PORTS	{ (void *) (CONFIG_SYS_SERIAL0), (void *) (CONFIG_SYS_SERIAL1) }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+#define CONFIG_SYS_SERIAL0		0x16000000
+#define CONFIG_SYS_SERIAL1		0x17000000
 
 /*#define CONFIG_NET_MULTI */
 
@@ -94,16 +94,16 @@
 /*
  * Miscellaneous configurable options
  */
-#define CFG_LONGHELP	/* undef to save memory	    */
-#define CFG_PROMPT	"Integrator-AP # "	/* Monitor Command Prompt   */
-#define CFG_CBSIZE	256		/* Console I/O Buffer Size  */
+#define CONFIG_SYS_LONGHELP	/* undef to save memory	    */
+#define CONFIG_SYS_PROMPT	"Integrator-AP # "	/* Monitor Command Prompt   */
+#define CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size  */
 /* Print Buffer Size */
-#define CFG_PBSIZE	(CFG_CBSIZE+sizeof(CFG_PROMPT)+16)
-#define CFG_MAXARGS	16		/* max number of command args	*/
-#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+#define CONFIG_SYS_PBSIZE	(CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
+#define CONFIG_SYS_MAXARGS	16		/* max number of command args	*/
+#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
 
-#undef	CFG_CLKS_IN_HZ		/* everything, incl board info, in Hz */
-#define CFG_LOAD_ADDR	0x7fc0	/* default load address */
+#undef	CONFIG_SYS_CLKS_IN_HZ		/* everything, incl board info, in Hz */
+#define CONFIG_SYS_LOAD_ADDR	0x7fc0	/* default load address */
 
 /*-----------------------------------------------------------------------
  * Stack sizes
@@ -123,21 +123,21 @@
 #define PHYS_SDRAM_1		0x00000000	/* SDRAM Bank #1 */
 #define PHYS_SDRAM_1_SIZE	0x02000000	/* 32 MB */
 
-#define CFG_FLASH_BASE		0x24000000
+#define CONFIG_SYS_FLASH_BASE		0x24000000
 
 /*-----------------------------------------------------------------------
  * FLASH and environment organization
  */
-#define CFG_ENV_IS_NOWHERE
-#define CFG_MAX_FLASH_BANKS	1		/* max number of memory banks */
+#define CONFIG_ENV_IS_NOWHERE
+#define CONFIG_SYS_MAX_FLASH_BANKS	1		/* max number of memory banks */
 #define PHYS_FLASH_SIZE		0x01000000	/* 16MB */
 /* timeout values are in ticks */
-#define CFG_FLASH_ERASE_TOUT	(2*CFG_HZ)	/* Timeout for Flash Erase */
-#define CFG_FLASH_WRITE_TOUT	(2*CFG_HZ)	/* Timeout for Flash Write */
-#define CFG_MAX_FLASH_SECT	128
-#define CFG_ENV_SIZE		32768
+#define CONFIG_SYS_FLASH_ERASE_TOUT	(2*CONFIG_SYS_HZ)	/* Timeout for Flash Erase */
+#define CONFIG_SYS_FLASH_WRITE_TOUT	(2*CONFIG_SYS_HZ)	/* Timeout for Flash Write */
+#define CONFIG_SYS_MAX_FLASH_SECT	128
+#define CONFIG_ENV_SIZE		32768
 
-#define PHYS_FLASH_1		(CFG_FLASH_BASE)
+#define PHYS_FLASH_1		(CONFIG_SYS_FLASH_BASE)
 
 /*-----------------------------------------------------------------------
  * PCI definitions
@@ -149,7 +149,7 @@
 #define DEBUG
 
 #define CONFIG_EEPRO100
-#define CFG_RX_ETH_BUFFER	8	/* use 8 rx buffer on eepro100	*/
+#define CONFIG_SYS_RX_ETH_BUFFER	8	/* use 8 rx buffer on eepro100	*/
 
 
 #define INTEGRATOR_BOOT_ROM_BASE	0x20000000
diff --git a/include/configs/integratorcp.h b/include/configs/integratorcp.h
index 347fa0201..1a70af620 100644
--- a/include/configs/integratorcp.h
+++ b/include/configs/integratorcp.h
@@ -35,11 +35,11 @@
  * High Level Configuration Options
  * (easy to change)
  */
-#define CFG_MEMTEST_START	0x100000
-#define CFG_MEMTEST_END		0x10000000
-#define CFG_HZ			1000
-#define CFG_HZ_CLOCK		1000000	/* Timer 1 is clocked at 1Mhz */
-#define CFG_TIMERBASE		0x13000100
+#define CONFIG_SYS_MEMTEST_START	0x100000
+#define CONFIG_SYS_MEMTEST_END		0x10000000
+#define CONFIG_SYS_HZ			1000
+#define CONFIG_SYS_HZ_CLOCK		1000000	/* Timer 1 is clocked at 1Mhz */
+#define CONFIG_SYS_TIMERBASE		0x13000100
 
 #define CONFIG_CMDLINE_TAG		1	/* enable passing of ATAGs  */
 #define CONFIG_SETUP_MEMORY_TAGS	1
@@ -47,8 +47,8 @@
 /*
  * Size of malloc() pool
  */
-#define CFG_MALLOC_LEN		(CFG_ENV_SIZE + 128*1024)
-#define CFG_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
+#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + 128*1024)
+#define CONFIG_SYS_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
 
 /*
  * Hardware drivers
@@ -61,14 +61,14 @@
 /*
  * NS16550 Configuration
  */
-#define CFG_PL011_SERIAL
+#define CONFIG_PL011_SERIAL
 #define CONFIG_PL011_CLOCK	14745600
-#define CONFIG_PL01x_PORTS	{ (void *)CFG_SERIAL0, (void *)CFG_SERIAL1 }
+#define CONFIG_PL01x_PORTS	{ (void *)CONFIG_SYS_SERIAL0, (void *)CONFIG_SYS_SERIAL1 }
 #define CONFIG_CONS_INDEX	0
 #define CONFIG_BAUDRATE		38400
-#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
-#define CFG_SERIAL0		0x16000000
-#define CFG_SERIAL1		0x17000000
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+#define CONFIG_SYS_SERIAL0		0x16000000
+#define CONFIG_SYS_SERIAL1		0x17000000
 
 
 /*
@@ -113,16 +113,16 @@ SIB at Block62 End Block62 address 0x24f80000
 /*
  * Miscellaneous configurable options
  */
-#define CFG_LONGHELP				/* undef to save memory */
-#define CFG_PROMPT	"Integrator-CP # "	/* Monitor Command Prompt */
-#define CFG_CBSIZE	256			/* Console I/O Buffer Size*/
+#define CONFIG_SYS_LONGHELP				/* undef to save memory */
+#define CONFIG_SYS_PROMPT	"Integrator-CP # "	/* Monitor Command Prompt */
+#define CONFIG_SYS_CBSIZE	256			/* Console I/O Buffer Size*/
 /* Print Buffer Size */
-#define CFG_PBSIZE	(CFG_CBSIZE+sizeof(CFG_PROMPT)+16)
-#define CFG_MAXARGS	16			/* max number of command args */
-#define CFG_BARGSIZE	CFG_CBSIZE		/* Boot Argument Buffer Size*/
+#define CONFIG_SYS_PBSIZE	(CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
+#define CONFIG_SYS_MAXARGS	16			/* max number of command args */
+#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE		/* Boot Argument Buffer Size*/
 
-#undef	CFG_CLKS_IN_HZ		/* everything, incl board info, in Hz */
-#define CFG_LOAD_ADDR	0x7fc0	/* default load address */
+#undef	CONFIG_SYS_CLKS_IN_HZ		/* everything, incl board info, in Hz */
+#define CONFIG_SYS_LOAD_ADDR	0x7fc0	/* default load address */
 
 /*-----------------------------------------------------------------------
  * Stack sizes
@@ -155,43 +155,43 @@ SIB at Block62 End Block62 address 0x24f80000
  * Base is always 0x24000000
 
  */
-#define CFG_FLASH_BASE		0x24000000
-#define CFG_MAX_FLASH_SECT	64
-#define CFG_MAX_FLASH_BANKS	1		/* max number of memory banks */
+#define CONFIG_SYS_FLASH_BASE		0x24000000
+#define CONFIG_SYS_MAX_FLASH_SECT	64
+#define CONFIG_SYS_MAX_FLASH_BANKS	1		/* max number of memory banks */
 #define PHYS_FLASH_SIZE		0x01000000	/* 16MB */
-#define CFG_FLASH_ERASE_TOUT	(2*CFG_HZ)	/* Timeout for Flash Erase */
-#define CFG_FLASH_WRITE_TOUT	(2*CFG_HZ)	/* Timeout for Flash Write */
+#define CONFIG_SYS_FLASH_ERASE_TOUT	(2*CONFIG_SYS_HZ)	/* Timeout for Flash Erase */
+#define CONFIG_SYS_FLASH_WRITE_TOUT	(2*CONFIG_SYS_HZ)	/* Timeout for Flash Write */
 
-#define CFG_MONITOR_LEN		0x00100000
-#define CFG_ENV_IS_IN_FLASH	(1)
+#define CONFIG_SYS_MONITOR_LEN		0x00100000
+#define CONFIG_ENV_IS_IN_FLASH	1
 
 /*
  * Move up the U-Boot & monitor area if more flash is fitted.
  * If this U-Boot is to be run on Integrators with varying flash sizes,
  * drivers/mtd/cfi_flash.c::flash_init() can read the Integrator CP_FLASHPROG
- * register and dynamically assign CFG_ENV_ADDR & CFG_MONITOR_BASE
- * - CFG_MONITOR_BASE is set to indicate that the environment is not
+ * register and dynamically assign CONFIG_ENV_ADDR & CONFIG_SYS_MONITOR_BASE
+ * - CONFIG_SYS_MONITOR_BASE is set to indicate that the environment is not
  * embedded in the boot monitor(s) area
  */
 #if ( PHYS_FLASH_SIZE == 0x04000000 )
 
-#define CFG_ENV_ADDR		0x27F00000
-#define CFG_MONITOR_BASE	0x27F40000
+#define CONFIG_ENV_ADDR		0x27F00000
+#define CONFIG_SYS_MONITOR_BASE	0x27F40000
 
 #elif (PHYS_FLASH_SIZE == 0x02000000 )
 
-#define CFG_ENV_ADDR		0x25F00000
-#define CFG_MONITOR_BASE	0x25F40000
+#define CONFIG_ENV_ADDR		0x25F00000
+#define CONFIG_SYS_MONITOR_BASE	0x25F40000
 
 #else
 
-#define CFG_ENV_ADDR		0x24F00000
-#define CFG_MONITOR_BASE	0x27F40000
+#define CONFIG_ENV_ADDR		0x24F00000
+#define CONFIG_SYS_MONITOR_BASE	0x27F40000
 
 #endif
 
-#define CFG_ENV_SECT_SIZE	0x40000		/* 256KB */
-#define CFG_ENV_SIZE		8192		/* 8KB */
+#define CONFIG_ENV_SECT_SIZE	0x40000		/* 256KB */
+#define CONFIG_ENV_SIZE		8192		/* 8KB */
 /*-----------------------------------------------------------------------
  * CP control registers
  */
diff --git a/include/configs/ixdp425.h b/include/configs/ixdp425.h
index 6b73abe1f..35b045127 100644
--- a/include/configs/ixdp425.h
+++ b/include/configs/ixdp425.h
@@ -45,8 +45,8 @@
 /*
  * Size of malloc() pool
  */
-#define CFG_MALLOC_LEN      (CFG_ENV_SIZE + 128*1024)
-#define CFG_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
+#define CONFIG_SYS_MALLOC_LEN      (CONFIG_ENV_SIZE + 128*1024)
+#define CONFIG_SYS_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
 
 /* allow to overwrite serial and ethaddr */
 #define CONFIG_ENV_OVERWRITE
@@ -93,23 +93,23 @@
 /*
  * Miscellaneous configurable options
  */
-#define CFG_LONGHELP                            /* undef to save memory         */
-#define CFG_PROMPT              "=> "   /* Monitor Command Prompt       */
-#define CFG_CBSIZE              256             /* Console I/O Buffer Size      */
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define CFG_MAXARGS             16              /* max number of command args   */
-#define CFG_BARGSIZE            CFG_CBSIZE      /* Boot Argument Buffer Size    */
+#define CONFIG_SYS_LONGHELP                            /* undef to save memory         */
+#define CONFIG_SYS_PROMPT              "=> "   /* Monitor Command Prompt       */
+#define CONFIG_SYS_CBSIZE              256             /* Console I/O Buffer Size      */
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS             16              /* max number of command args   */
+#define CONFIG_SYS_BARGSIZE            CONFIG_SYS_CBSIZE      /* Boot Argument Buffer Size    */
 
-#define CFG_MEMTEST_START       0x00400000      /* memtest works on     */
-#define CFG_MEMTEST_END         0x00800000      /* 4 ... 8 MB in DRAM   */
+#define CONFIG_SYS_MEMTEST_START       0x00400000      /* memtest works on     */
+#define CONFIG_SYS_MEMTEST_END         0x00800000      /* 4 ... 8 MB in DRAM   */
 
-#undef  CFG_CLKS_IN_HZ          /* everything, incl board info, in Hz */
+#undef  CONFIG_SYS_CLKS_IN_HZ          /* everything, incl board info, in Hz */
 
-#define CFG_LOAD_ADDR           0x00010000      /* default load address */
+#define CONFIG_SYS_LOAD_ADDR           0x00010000      /* default load address */
 
-#define CFG_HZ                  3333333         /* spec says 66.666 MHz, but it appears to be 33 */
+#define CONFIG_SYS_HZ                  3333333         /* spec says 66.666 MHz, but it appears to be 33 */
 						/* valid baudrates */
-#define CFG_BAUDRATE_TABLE      { 9600, 19200, 38400, 57600, 115200 }
+#define CONFIG_SYS_BAUDRATE_TABLE      { 9600, 19200, 38400, 57600, 115200 }
 
 /*
  * Stack sizes
@@ -134,7 +134,7 @@
 /*
  * select serial console configuration
  */
-#define CFG_IXP425_CONSOLE	IXP425_UART1   /* we use UART1 for console */
+#define CONFIG_SYS_IXP425_CONSOLE	IXP425_UART1   /* we use UART1 for console */
 
 /*
  * Physical Memory Map
@@ -148,24 +148,24 @@
 #define PHYS_FLASH_BANK_SIZE    0x00800000 /* 8 MB Banks */
 #define PHYS_FLASH_SECT_SIZE    0x00020000 /* 128 KB sectors (x1) */
 
-#define CFG_DRAM_BASE           0x00000000
-#define CFG_DRAM_SIZE           0x01000000
+#define CONFIG_SYS_DRAM_BASE           0x00000000
+#define CONFIG_SYS_DRAM_SIZE           0x01000000
 
-#define CFG_FLASH_BASE          PHYS_FLASH_1
-#define CFG_MONITOR_BASE	CFG_FLASH_BASE
-#define CFG_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor	*/
+#define CONFIG_SYS_FLASH_BASE          PHYS_FLASH_1
+#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_FLASH_BASE
+#define CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor	*/
 
 /*
  * Expansion bus settings
  */
-#define CFG_EXP_CS0				0xbcd23c42
+#define CONFIG_SYS_EXP_CS0				0xbcd23c42
 
 /*
  * SDRAM settings
  */
-#define CFG_SDR_CONFIG		0xd
-#define CFG_SDR_MODE_CONFIG	0x1
-#define CFG_SDRAM_REFRESH_CNT	0x81a
+#define CONFIG_SYS_SDR_CONFIG		0xd
+#define CONFIG_SYS_SDR_MODE_CONFIG	0x1
+#define CONFIG_SYS_SDRAM_REFRESH_CNT	0x81a
 
 /*
  * GPIO settings
@@ -177,24 +177,24 @@
 /*
  * FLASH and environment organization
  */
-#define CFG_MAX_FLASH_BANKS     1       /* max number of memory banks           */
-#define CFG_MAX_FLASH_SECT      128	/* max number of sectors on one chip    */
+#define CONFIG_SYS_MAX_FLASH_BANKS     1       /* max number of memory banks           */
+#define CONFIG_SYS_MAX_FLASH_SECT      128	/* max number of sectors on one chip    */
 
-#define CFG_FLASH_CFI				/* The flash is CFI compatible	*/
+#define CONFIG_SYS_FLASH_CFI				/* The flash is CFI compatible	*/
 #define CONFIG_FLASH_CFI_DRIVER			/* Use common CFI driver	*/
-#define	CFG_ENV_IS_IN_FLASH	1
+#define	CONFIG_ENV_IS_IN_FLASH	1
 
-#define CFG_FLASH_BANKS_LIST	{ PHYS_FLASH_1 }
+#define CONFIG_SYS_FLASH_BANKS_LIST	{ PHYS_FLASH_1 }
 
-#define CFG_FLASH_CFI_WIDTH	FLASH_CFI_16BIT	/* no byte writes on IXP4xx	*/
+#define CONFIG_SYS_FLASH_CFI_WIDTH	FLASH_CFI_16BIT	/* no byte writes on IXP4xx	*/
 
-#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
-#define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
+#define CONFIG_SYS_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
+#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
 
-#define CFG_FLASH_EMPTY_INFO		/* print 'E' for empty sector on flinfo */
+#define CONFIG_SYS_FLASH_EMPTY_INFO		/* print 'E' for empty sector on flinfo */
 
-#define CFG_ENV_SECT_SIZE	0x20000	/* size of one complete sector	*/
-#define CFG_ENV_ADDR		(PHYS_FLASH_1 + 0x20000)
-#define	CFG_ENV_SIZE		0x2000	/* Total Size of Environment Sector	*/
+#define CONFIG_ENV_SECT_SIZE	0x20000	/* size of one complete sector	*/
+#define CONFIG_ENV_ADDR		(PHYS_FLASH_1 + 0x20000)
+#define	CONFIG_ENV_SIZE		0x2000	/* Total Size of Environment Sector	*/
 
 #endif  /* __CONFIG_H */
diff --git a/include/configs/ixdpg425.h b/include/configs/ixdpg425.h
index d4e487124..528bccdab 100644
--- a/include/configs/ixdpg425.h
+++ b/include/configs/ixdpg425.h
@@ -48,7 +48,7 @@
 #define CONFIG_HAS_ETH1
 #define CONFIG_PHY1_ADDR	4	/* NPE1 PHY address		*/
 #define CONFIG_MII		1	/* MII PHY management		*/
-#define CFG_RX_ETH_BUFFER	16	/* Number of ethernet rx buffers & descriptors */
+#define CONFIG_SYS_RX_ETH_BUFFER	16	/* Number of ethernet rx buffers & descriptors */
 
 /*
  * Misc configuration options
@@ -57,7 +57,7 @@
 #define CONFIG_USE_IRQ          1	/* we need IRQ stuff for timer	*/
 
 #define CONFIG_BOOTCOUNT_LIMIT		/* support for bootcount limit	*/
-#define CFG_BOOTCOUNT_ADDR	0x60003000 /* inside qmrg sram		*/
+#define CONFIG_SYS_BOOTCOUNT_ADDR	0x60003000 /* inside qmrg sram		*/
 
 #define CONFIG_CMDLINE_TAG	1	/* enable passing of ATAGs	*/
 #define CONFIG_SETUP_MEMORY_TAGS 1
@@ -66,14 +66,14 @@
 /*
  * Size of malloc() pool
  */
-#define CFG_MALLOC_LEN		(256 << 10)
-#define CFG_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
+#define CONFIG_SYS_MALLOC_LEN		(256 << 10)
+#define CONFIG_SYS_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
 
 /* allow to overwrite serial and ethaddr */
 #define CONFIG_ENV_OVERWRITE
 
 #define CONFIG_BAUDRATE         115200
-#define CFG_IXP425_CONSOLE	IXP425_UART1   /* we use UART1 for console */
+#define CONFIG_SYS_IXP425_CONSOLE	IXP425_UART1   /* we use UART1 for console */
 
 
 /*
@@ -103,22 +103,22 @@
 /*
  * Miscellaneous configurable options
  */
-#define CFG_LONGHELP                            /* undef to save memory         */
-#define CFG_PROMPT              "=> "   /* Monitor Command Prompt       */
-#define CFG_CBSIZE              256             /* Console I/O Buffer Size      */
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define CFG_MAXARGS             16              /* max number of command args   */
-#define CFG_BARGSIZE            CFG_CBSIZE      /* Boot Argument Buffer Size    */
+#define CONFIG_SYS_LONGHELP                            /* undef to save memory         */
+#define CONFIG_SYS_PROMPT              "=> "   /* Monitor Command Prompt       */
+#define CONFIG_SYS_CBSIZE              256             /* Console I/O Buffer Size      */
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS             16              /* max number of command args   */
+#define CONFIG_SYS_BARGSIZE            CONFIG_SYS_CBSIZE      /* Boot Argument Buffer Size    */
 
-#define CFG_MEMTEST_START       0x00400000      /* memtest works on     */
-#define CFG_MEMTEST_END         0x00800000      /* 4 ... 8 MB in DRAM   */
-#define CFG_LOAD_ADDR           0x00010000      /* default load address */
+#define CONFIG_SYS_MEMTEST_START       0x00400000      /* memtest works on     */
+#define CONFIG_SYS_MEMTEST_END         0x00800000      /* 4 ... 8 MB in DRAM   */
+#define CONFIG_SYS_LOAD_ADDR           0x00010000      /* default load address */
 
-#undef  CFG_CLKS_IN_HZ          /* everything, incl board info, in Hz */
-#define CFG_HZ			1000		/* decrementer freq: 1 ms ticks */
+#undef  CONFIG_SYS_CLKS_IN_HZ          /* everything, incl board info, in Hz */
+#define CONFIG_SYS_HZ			1000		/* decrementer freq: 1 ms ticks */
 
 						/* valid baudrates */
-#define CFG_BAUDRATE_TABLE      { 9600, 19200, 38400, 57600, 115200 }
+#define CONFIG_SYS_BAUDRATE_TABLE      { 9600, 19200, 38400, 57600, 115200 }
 
 /*
  * Stack sizes
@@ -184,68 +184,68 @@
 #define PHYS_FLASH_BANK_SIZE    0x01000000 /* 16 MB Banks */
 #define PHYS_FLASH_SECT_SIZE    0x00020000 /* 128 KB sectors (x1) */
 
-#define CFG_DRAM_BASE           0x00000000
-#define CFG_DRAM_SIZE           0x01000000
+#define CONFIG_SYS_DRAM_BASE           0x00000000
+#define CONFIG_SYS_DRAM_SIZE           0x01000000
 
-#define CFG_FLASH_BASE          PHYS_FLASH_1
-#define CFG_MONITOR_BASE	CFG_FLASH_BASE
-#define CFG_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor	*/
+#define CONFIG_SYS_FLASH_BASE          PHYS_FLASH_1
+#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_FLASH_BASE
+#define CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor	*/
 
 /*
  * Expansion bus settings
  */
-#define CFG_EXP_CS0		0xbcd23c42
+#define CONFIG_SYS_EXP_CS0		0xbcd23c42
 
 /*
  * SDRAM settings
  */
-#define CFG_SDR_CONFIG		0x18
-#define CFG_SDR_MODE_CONFIG	0x1
-#define CFG_SDRAM_REFRESH_CNT	0x81a
+#define CONFIG_SYS_SDR_CONFIG		0x18
+#define CONFIG_SYS_SDR_MODE_CONFIG	0x1
+#define CONFIG_SYS_SDRAM_REFRESH_CNT	0x81a
 
 /*
  * FLASH and environment organization
  */
-#define CFG_MAX_FLASH_BANKS     1       /* max number of memory banks           */
-#define CFG_MAX_FLASH_SECT      128	/* max number of sectors on one chip    */
+#define CONFIG_SYS_MAX_FLASH_BANKS     1       /* max number of memory banks           */
+#define CONFIG_SYS_MAX_FLASH_SECT      128	/* max number of sectors on one chip    */
 
-#define CFG_FLASH_CFI				/* The flash is CFI compatible	*/
+#define CONFIG_SYS_FLASH_CFI				/* The flash is CFI compatible	*/
 #define CONFIG_FLASH_CFI_DRIVER			/* Use common CFI driver	*/
-#define	CFG_ENV_IS_IN_FLASH	1
+#define	CONFIG_ENV_IS_IN_FLASH	1
 
-#define CFG_FLASH_USE_BUFFER_WRITE 1	/* use buffered writes (20x faster)	*/
-#define CFG_FLASH_PROTECTION	1	/* hardware flash protection		*/
+#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1	/* use buffered writes (20x faster)	*/
+#define CONFIG_SYS_FLASH_PROTECTION	1	/* hardware flash protection		*/
 
-#define CFG_FLASH_BANKS_LIST	{ PHYS_FLASH_1 }
+#define CONFIG_SYS_FLASH_BANKS_LIST	{ PHYS_FLASH_1 }
 
-#define CFG_FLASH_CFI_WIDTH	FLASH_CFI_16BIT	/* no byte writes on IXP4xx	*/
+#define CONFIG_SYS_FLASH_CFI_WIDTH	FLASH_CFI_16BIT	/* no byte writes on IXP4xx	*/
 
-#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
-#define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
+#define CONFIG_SYS_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
+#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
 
-#define CFG_FLASH_EMPTY_INFO		/* print 'E' for empty sector on flinfo */
+#define CONFIG_SYS_FLASH_EMPTY_INFO		/* print 'E' for empty sector on flinfo */
 
-#define CFG_ENV_SECT_SIZE	0x20000	/* size of one complete sector	*/
-#define CFG_ENV_ADDR		(PHYS_FLASH_1 + 0x40000)
-#define	CFG_ENV_SIZE		0x2000	/* Total Size of Environment Sector	*/
+#define CONFIG_ENV_SECT_SIZE	0x20000	/* size of one complete sector	*/
+#define CONFIG_ENV_ADDR		(PHYS_FLASH_1 + 0x40000)
+#define	CONFIG_ENV_SIZE		0x2000	/* Total Size of Environment Sector	*/
 
 /* Address and size of Redundant Environment Sector	*/
-#define CFG_ENV_ADDR_REDUND	(CFG_ENV_ADDR + CFG_ENV_SECT_SIZE)
-#define CFG_ENV_SIZE_REDUND	(CFG_ENV_SIZE)
+#define CONFIG_ENV_ADDR_REDUND	(CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE)
+#define CONFIG_ENV_SIZE_REDUND	(CONFIG_ENV_SIZE)
 
 /*
  * GPIO settings
  */
-#define CFG_GPIO_PCI_INTA_N	6
-#define CFG_GPIO_PCI_INTB_N	7
-#define CFG_GPIO_SWITCH_RESET_N	8
-#define CFG_GPIO_SLIC_RESET_N	13
-#define CFG_GPIO_PCI_CLK	14
-#define CFG_GPIO_EXTBUS_CLK	15
+#define CONFIG_SYS_GPIO_PCI_INTA_N	6
+#define CONFIG_SYS_GPIO_PCI_INTB_N	7
+#define CONFIG_SYS_GPIO_SWITCH_RESET_N	8
+#define CONFIG_SYS_GPIO_SLIC_RESET_N	13
+#define CONFIG_SYS_GPIO_PCI_CLK	14
+#define CONFIG_SYS_GPIO_EXTBUS_CLK	15
 
 /*
  * Cache Configuration
  */
-#define CFG_CACHELINE_SIZE	32
+#define CONFIG_SYS_CACHELINE_SIZE	32
 
 #endif  /* __CONFIG_H */
diff --git a/include/configs/jupiter.h b/include/configs/jupiter.h
index af88a3fa2..2ebe37057 100644
--- a/include/configs/jupiter.h
+++ b/include/configs/jupiter.h
@@ -33,7 +33,7 @@
 #define CONFIG_MPC5200		1	/* especially an MPC5200 */
 #define CONFIG_JUPITER		1	/* ... on Jupiter board */
 
-#define CFG_MPC5XXX_CLKIN	33000000 /* ... running at 33.000000MHz */
+#define CONFIG_SYS_MPC5XXX_CLKIN	33000000 /* ... running at 33.000000MHz */
 
 #define CONFIG_BOARD_EARLY_INIT_R	1
 #define CONFIG_BOARD_EARLY_INIT_F	1
@@ -48,7 +48,7 @@
  */
 #define CONFIG_PSC_CONSOLE	1	/* console is on PSC1 */
 #define CONFIG_BAUDRATE		115200	/* ... at 115200 bps */
-#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
 
 /*
  * PCI Mapping:
@@ -71,11 +71,11 @@
 #define CONFIG_PCI_IO_SIZE	0x01000000
 #endif
 
-#define CFG_XLB_PIPELINING	1
+#define CONFIG_SYS_XLB_PIPELINING	1
 
 #define CONFIG_NET_MULTI	1
 #define CONFIG_MII		1
-#define CFG_RX_ETH_BUFFER	8  /* use 8 rx buffer on eepro100  */
+#define CONFIG_SYS_RX_ETH_BUFFER	8  /* use 8 rx buffer on eepro100  */
 
 /* Partitions */
 #define CONFIG_MAC_PARTITION
@@ -144,7 +144,7 @@
 /*
  * IPB Bus clocking configuration.
  */
-#undef CFG_IPBSPEED_133			/* define for 133MHz speed */
+#undef CONFIG_SYS_IPBSPEED_133			/* define for 133MHz speed */
 
 #if 0
 /* pass open firmware flat tree */
@@ -162,78 +162,78 @@
  * I2C configuration
  */
 #define CONFIG_HARD_I2C		1	/* I2C with hardware support */
-#define CFG_I2C_MODULE		2	/* Select I2C module #1 or #2 */
+#define CONFIG_SYS_I2C_MODULE		2	/* Select I2C module #1 or #2 */
 
-#define CFG_I2C_SPEED		100000 /* 100 kHz */
-#define CFG_I2C_SLAVE		0x7F
+#define CONFIG_SYS_I2C_SPEED		100000 /* 100 kHz */
+#define CONFIG_SYS_I2C_SLAVE		0x7F
 
 /*
  * EEPROM configuration
  */
-#define CFG_I2C_EEPROM_ADDR		0x50	/* 1010000x */
-#define CFG_I2C_EEPROM_ADDR_LEN		1
-#define CFG_EEPROM_PAGE_WRITE_BITS	3
-#define CFG_EEPROM_PAGE_WRITE_DELAY_MS	70
+#define CONFIG_SYS_I2C_EEPROM_ADDR		0x50	/* 1010000x */
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN		1
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS	3
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	70
 #endif
 
 /*
  * Flash configuration
  */
-#define CFG_FLASH_BASE		0xFF000000
-#define CFG_FLASH_SIZE		0x01000000
+#define CONFIG_SYS_FLASH_BASE		0xFF000000
+#define CONFIG_SYS_FLASH_SIZE		0x01000000
 
-#define CFG_MAX_FLASH_SECT	128	/* max num of sects on one chip */
+#define CONFIG_SYS_MAX_FLASH_SECT	128	/* max num of sects on one chip */
 
-#define CFG_ENV_ADDR		(TEXT_BASE + 0x40000) /* third sector */
+#define CONFIG_ENV_ADDR		(TEXT_BASE + 0x40000) /* third sector */
 
-#define CFG_FLASH_ERASE_TOUT	240000	/* Flash Erase Timeout (in ms)  */
-#define CFG_FLASH_WRITE_TOUT	500	/* Flash Write Timeout (in ms)  */
+#define CONFIG_SYS_FLASH_ERASE_TOUT	240000	/* Flash Erase Timeout (in ms)  */
+#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Flash Write Timeout (in ms)  */
 
-#define CFG_MAX_FLASH_BANKS	1	/* max num of flash banks */
+#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max num of flash banks */
 
 #define CONFIG_FLASH_CFI_DRIVER
-#define CFG_FLASH_CFI
-#define CFG_FLASH_EMPTY_INFO
-#define CFG_FLASH_CFI_WIDTH	FLASH_CFI_8BIT
-#define CFG_UPDATE_FLASH_SIZE	1
-#define CFG_FLASH_USE_BUFFER_WRITE	1
+#define CONFIG_SYS_FLASH_CFI
+#define CONFIG_SYS_FLASH_EMPTY_INFO
+#define CONFIG_SYS_FLASH_CFI_WIDTH	FLASH_CFI_8BIT
+#define CONFIG_SYS_UPDATE_FLASH_SIZE	1
+#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE	1
 
 /*
  * Environment settings
  */
-#define CFG_ENV_IS_IN_FLASH	1
-#define CFG_ENV_SIZE		0x20000
-#define CFG_ENV_SECT_SIZE	0x20000
+#define CONFIG_ENV_IS_IN_FLASH	1
+#define CONFIG_ENV_SIZE		0x20000
+#define CONFIG_ENV_SECT_SIZE	0x20000
 #define CONFIG_ENV_OVERWRITE	1
 
 /* Address and size of Redundant Environment Sector	*/
-#define CFG_ENV_ADDR_REDUND	(CFG_ENV_ADDR + CFG_ENV_SECT_SIZE)
-#define CFG_ENV_SIZE_REDUND	(CFG_ENV_SIZE)
+#define CONFIG_ENV_ADDR_REDUND	(CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE)
+#define CONFIG_ENV_SIZE_REDUND	(CONFIG_ENV_SIZE)
 
 /*
  * Memory map
  */
-#define CFG_MBAR		0xF0000000
-#define CFG_SDRAM_BASE		0x00000000
-#define CFG_DEFAULT_MBAR	0x80000000
+#define CONFIG_SYS_MBAR		0xF0000000
+#define CONFIG_SYS_SDRAM_BASE		0x00000000
+#define CONFIG_SYS_DEFAULT_MBAR	0x80000000
 
 /* Use SRAM until RAM will be available */
-#define CFG_INIT_RAM_ADDR	MPC5XXX_SRAM
-#define CFG_INIT_RAM_END	MPC5XXX_SRAM_SIZE	/* End of used area in DPRAM */
+#define CONFIG_SYS_INIT_RAM_ADDR	MPC5XXX_SRAM
+#define CONFIG_SYS_INIT_RAM_END	MPC5XXX_SRAM_SIZE	/* End of used area in DPRAM */
 
 
-#define CFG_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
-#define CFG_MONITOR_BASE    TEXT_BASE
-#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
-#   define CFG_RAMBOOT		1
+#define CONFIG_SYS_MONITOR_BASE    TEXT_BASE
+#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
+#   define CONFIG_SYS_RAMBOOT		1
 #endif
 
-#define CFG_MONITOR_LEN		(192 << 10)	/* Reserve 192 kB for Monitor	*/
-#define CFG_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/
-#define CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
+#define CONFIG_SYS_MONITOR_LEN		(192 << 10)	/* Reserve 192 kB for Monitor	*/
+#define CONFIG_SYS_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/
+#define CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
 
 /*
  * Ethernet configuration
@@ -248,56 +248,56 @@
 /*
  * GPIO configuration
  */
-#define CFG_GPS_PORT_CONFIG	0x10000004
+#define CONFIG_SYS_GPS_PORT_CONFIG	0x10000004
 
 /*
  * Miscellaneous configurable options
  */
-#define CFG_LONGHELP			/* undef to save memory	    */
-#define CFG_PROMPT		"=> "	/* Monitor Command Prompt   */
+#define CONFIG_SYS_LONGHELP			/* undef to save memory	    */
+#define CONFIG_SYS_PROMPT		"=> "	/* Monitor Command Prompt   */
 
 #define CONFIG_CMDLINE_EDITING	1	/* add command line history	*/
-#define CFG_HUSH_PARSER		1	/* Use the HUSH parser		*/
-#ifdef	CFG_HUSH_PARSER
-#define	CFG_PROMPT_HUSH_PS2	"> "
+#define CONFIG_SYS_HUSH_PARSER		1	/* Use the HUSH parser		*/
+#ifdef	CONFIG_SYS_HUSH_PARSER
+#define	CONFIG_SYS_PROMPT_HUSH_PS2	"> "
 #endif
 #if defined(CONFIG_CMD_KGDB)
-#define CFG_CBSIZE		1024	/* Console I/O Buffer Size  */
+#define CONFIG_SYS_CBSIZE		1024	/* Console I/O Buffer Size  */
 #else
-#define CFG_CBSIZE		256	/* Console I/O Buffer Size  */
+#define CONFIG_SYS_CBSIZE		256	/* Console I/O Buffer Size  */
 #endif
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16)	/* Print Buffer Size */
-#define CFG_MAXARGS		16		/* max number of command args	*/
-#define CFG_BARGSIZE		CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)	/* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS		16		/* max number of command args	*/
+#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
 
-#define CFG_MEMTEST_START	0x00100000	/* memtest works on */
-#define CFG_MEMTEST_END		0x00f00000	/* 1 ... 15 MB in DRAM	*/
-#define CFG_ALT_MEMTEST		1
+#define CONFIG_SYS_MEMTEST_START	0x00100000	/* memtest works on */
+#define CONFIG_SYS_MEMTEST_END		0x00f00000	/* 1 ... 15 MB in DRAM	*/
+#define CONFIG_SYS_ALT_MEMTEST		1
 
-#define CFG_LOAD_ADDR		0x200000	/* default load address */
+#define CONFIG_SYS_LOAD_ADDR		0x200000	/* default load address */
 
-#define CFG_HZ			1000	/* decrementer freq: 1 ms ticks */
+#define CONFIG_SYS_HZ			1000	/* decrementer freq: 1 ms ticks */
 
-#define CFG_CACHELINE_SIZE	32	/* For MPC5xxx CPUs */
+#define CONFIG_SYS_CACHELINE_SIZE	32	/* For MPC5xxx CPUs */
 #if defined(CONFIG_CMD_KGDB)
-#  define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value */
+#  define CONFIG_SYS_CACHELINE_SHIFT	5	/* log base 2 of the above value */
 #endif
 
 /*
  * Various low-level settings
  */
-#define CFG_HID0_INIT		HID0_ICE | HID0_ICFI
-#define CFG_HID0_FINAL		HID0_ICE
+#define CONFIG_SYS_HID0_INIT		HID0_ICE | HID0_ICFI
+#define CONFIG_SYS_HID0_FINAL		HID0_ICE
 
-#define CFG_BOOTCS_START	CFG_FLASH_BASE
-#define CFG_BOOTCS_SIZE		CFG_FLASH_SIZE
-#define CFG_BOOTCS_CFG		0x00047801
-#define CFG_CS0_START		CFG_FLASH_BASE
-#define CFG_CS0_SIZE		CFG_FLASH_SIZE
+#define CONFIG_SYS_BOOTCS_START	CONFIG_SYS_FLASH_BASE
+#define CONFIG_SYS_BOOTCS_SIZE		CONFIG_SYS_FLASH_SIZE
+#define CONFIG_SYS_BOOTCS_CFG		0x00047801
+#define CONFIG_SYS_CS0_START		CONFIG_SYS_FLASH_BASE
+#define CONFIG_SYS_CS0_SIZE		CONFIG_SYS_FLASH_SIZE
 
-#define CFG_CS_BURST		0x00000000
-#define CFG_CS_DEADCYCLE	0x33333333
+#define CONFIG_SYS_CS_BURST		0x00000000
+#define CONFIG_SYS_CS_DEADCYCLE	0x33333333
 
-#define CFG_RESET_ADDRESS	0xff000000
+#define CONFIG_SYS_RESET_ADDRESS	0xff000000
 
 #endif /* __CONFIG_H */
diff --git a/include/configs/katmai.h b/include/configs/katmai.h
index 5dcca7573..ea6cf0d23 100644
--- a/include/configs/katmai.h
+++ b/include/configs/katmai.h
@@ -38,7 +38,7 @@
 #define CONFIG_440			1	/* ... PPC440 family	*/
 #define CONFIG_440SPE			1	/* Specifc SPe support	*/
 #define CONFIG_SYS_CLK_FREQ	33333333	/* external freq to pll	*/
-#define CFG_4xx_RESET_TYPE	0x2	/* use chip reset on this board	*/
+#define CONFIG_SYS_4xx_RESET_TYPE	0x2	/* use chip reset on this board	*/
 
 /*
  * Enable this board for more than 2GB of SDRAM
@@ -53,6 +53,13 @@
 #define CONFIG_HOSTNAME		katmai
 #include "amcc-common.h"
 
+/*
+ * For booting 256K-paged Linux we should have 16MB of memory
+ * for Linux initial memory map
+ */
+#undef CONFIG_SYS_BOOTMAPSZ
+#define CONFIG_SYS_BOOTMAPSZ	(16 << 20)
+
 #define CONFIG_BOARD_EARLY_INIT_F 1	/* Call board_pre_init		*/
 #undef  CONFIG_SHOW_BOOT_PROGRESS
 
@@ -60,53 +67,53 @@
  * Base addresses -- Note these are effective addresses where the
  * actual resources get mapped (not physical addresses)
  *----------------------------------------------------------------------*/
-#define CFG_FLASH_BASE		0xff000000	/* start of FLASH	*/
-#define CFG_PERIPHERAL_BASE	0xa0000000	/* internal peripherals	*/
-#define CFG_ISRAM_BASE		0x90000000	/* internal SRAM	*/
+#define CONFIG_SYS_FLASH_BASE		0xff000000	/* start of FLASH	*/
+#define CONFIG_SYS_PERIPHERAL_BASE	0xa0000000	/* internal peripherals	*/
+#define CONFIG_SYS_ISRAM_BASE		0x90000000	/* internal SRAM	*/
 
-#define CFG_PCI_MEMBASE		0x80000000	/* mapped PCI memory	*/
-#define CFG_PCI_BASE		0xd0000000	/* internal PCI regs	*/
-#define CFG_PCI_TARGBASE	CFG_PCI_MEMBASE
+#define CONFIG_SYS_PCI_MEMBASE		0x80000000	/* mapped PCI memory	*/
+#define CONFIG_SYS_PCI_BASE		0xd0000000	/* internal PCI regs	*/
+#define CONFIG_SYS_PCI_TARGBASE	CONFIG_SYS_PCI_MEMBASE
 
-#define CFG_PCIE_MEMBASE	0xb0000000	/* mapped PCIe memory	*/
-#define CFG_PCIE_MEMSIZE	0x08000000	/* smallest incr for PCIe port */
-#define CFG_PCIE_BASE		0xe0000000	/* PCIe UTL regs */
+#define CONFIG_SYS_PCIE_MEMBASE	0xb0000000	/* mapped PCIe memory	*/
+#define CONFIG_SYS_PCIE_MEMSIZE	0x08000000	/* smallest incr for PCIe port */
+#define CONFIG_SYS_PCIE_BASE		0xe0000000	/* PCIe UTL regs */
 
-#define CFG_PCIE0_CFGBASE	0xc0000000
-#define CFG_PCIE1_CFGBASE	0xc1000000
-#define CFG_PCIE2_CFGBASE	0xc2000000
-#define CFG_PCIE0_XCFGBASE	0xc3000000
-#define CFG_PCIE1_XCFGBASE	0xc3001000
-#define CFG_PCIE2_XCFGBASE	0xc3002000
+#define CONFIG_SYS_PCIE0_CFGBASE	0xc0000000
+#define CONFIG_SYS_PCIE1_CFGBASE	0xc1000000
+#define CONFIG_SYS_PCIE2_CFGBASE	0xc2000000
+#define CONFIG_SYS_PCIE0_XCFGBASE	0xc3000000
+#define CONFIG_SYS_PCIE1_XCFGBASE	0xc3001000
+#define CONFIG_SYS_PCIE2_XCFGBASE	0xc3002000
 
 /* base address of inbound PCIe window */
-#define CFG_PCIE_INBOUND_BASE	0x0000000000000000ULL
+#define CONFIG_SYS_PCIE_INBOUND_BASE	0x0000000000000000ULL
 
 /* System RAM mapped to PCI space */
-#define CONFIG_PCI_SYS_MEM_BUS	CFG_SDRAM_BASE
-#define CONFIG_PCI_SYS_MEM_PHYS	CFG_SDRAM_BASE
+#define CONFIG_PCI_SYS_MEM_BUS	CONFIG_SYS_SDRAM_BASE
+#define CONFIG_PCI_SYS_MEM_PHYS	CONFIG_SYS_SDRAM_BASE
 #define CONFIG_PCI_SYS_MEM_SIZE	(1024 * 1024 * 1024)
 
-#define CFG_ACE_BASE		0xfe000000	/* Xilinx ACE controller - Compact Flash */
+#define CONFIG_SYS_ACE_BASE		0xfe000000	/* Xilinx ACE controller - Compact Flash */
 
 /*-----------------------------------------------------------------------
  * Initial RAM & stack pointer (placed in internal SRAM)
  *----------------------------------------------------------------------*/
-#define CFG_TEMP_STACK_OCM	1
-#define CFG_OCM_DATA_ADDR	CFG_ISRAM_BASE
-#define CFG_INIT_RAM_ADDR	CFG_ISRAM_BASE	/* Initial RAM address	*/
-#define CFG_INIT_RAM_END	0x2000		/* End of used area in RAM */
-#define CFG_GBL_DATA_SIZE	128		/* num bytes initial data */
+#define CONFIG_SYS_TEMP_STACK_OCM	1
+#define CONFIG_SYS_OCM_DATA_ADDR	CONFIG_SYS_ISRAM_BASE
+#define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_ISRAM_BASE	/* Initial RAM address	*/
+#define CONFIG_SYS_INIT_RAM_END	0x2000		/* End of used area in RAM */
+#define CONFIG_SYS_GBL_DATA_SIZE	128		/* num bytes initial data */
 
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_POST_WORD_ADDR	(CFG_GBL_DATA_OFFSET - 0x4)
-#define CFG_INIT_SP_OFFSET	CFG_POST_WORD_ADDR
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_POST_WORD_ADDR	(CONFIG_SYS_GBL_DATA_OFFSET - 0x4)
+#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_POST_WORD_ADDR
 
 /*-----------------------------------------------------------------------
  * Serial Port
  *----------------------------------------------------------------------*/
 #undef CONFIG_UART1_CONSOLE
-#undef CFG_EXT_SERIAL_CLOCK
+#undef CONFIG_SYS_EXT_SERIAL_CLOCK
 
 /*-----------------------------------------------------------------------
  * DDR SDRAM
@@ -120,35 +127,34 @@
 /*-----------------------------------------------------------------------
  * I2C
  *----------------------------------------------------------------------*/
-#define CFG_I2C_SPEED		100000	/* I2C speed and slave address	*/
+#define CONFIG_SYS_I2C_SPEED		100000	/* I2C speed and slave address	*/
 
 #define CONFIG_I2C_MULTI_BUS
 #define CONFIG_I2C_CMD_TREE
-#define CFG_SPD_BUS_NUM		0	/* The I2C bus for SPD		*/
+#define CONFIG_SYS_SPD_BUS_NUM		0	/* The I2C bus for SPD		*/
 
 #define IIC0_BOOTPROM_ADDR	0x50
 #define IIC0_ALT_BOOTPROM_ADDR	0x54
 
-#define CFG_I2C_MULTI_EEPROMS
-#define CFG_I2C_EEPROM_ADDR	(0x50)
-#define CFG_I2C_EEPROM_ADDR_LEN 1
-#define CFG_EEPROM_PAGE_WRITE_ENABLE
-#define CFG_EEPROM_PAGE_WRITE_BITS 3
-#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10
+#define CONFIG_SYS_I2C_MULTI_EEPROMS
+#define CONFIG_SYS_I2C_EEPROM_ADDR	(0x50)
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10
 
 /* I2C RTC */
 #define CONFIG_RTC_M41T11	1
-#define CFG_RTC_BUS_NUM		1	/* The I2C bus for RTC		*/
-#define CFG_I2C_RTC_ADDR	0x68
-#define CFG_M41T11_BASE_YEAR	1900	/* play along with linux	*/
+#define CONFIG_SYS_RTC_BUS_NUM		1	/* The I2C bus for RTC		*/
+#define CONFIG_SYS_I2C_RTC_ADDR	0x68
+#define CONFIG_SYS_M41T11_BASE_YEAR	1900	/* play along with linux	*/
 
 /* I2C DTT */
 #define CONFIG_DTT_ADM1021	1	/* ADM1021 temp sensor support	*/
-#define CFG_DTT_BUS_NUM		1	/* The I2C bus for DTT		*/
+#define CONFIG_SYS_DTT_BUS_NUM		1	/* The I2C bus for DTT		*/
 /*
  * standard dtt sensor configuration - bottom bit will determine local or
  * remote sensor of the ADM1021, the rest determines index into
- * CFG_DTT_ADM1021 array below.
+ * CONFIG_SYS_DTT_ADM1021 array below.
  */
 #define CONFIG_DTT_SENSORS	{ 0, 1 }
 
@@ -165,12 +171,12 @@
  * - local temp sensor enabled, min set to 0 deg, max set to 85 deg
  * - remote temp sensor enabled, min set to 0 deg, max set to 85 deg
  */
-#define CFG_DTT_ADM1021		{ { 0x18, 0x02, 0, 1, 0, 85, 1, 0, 58} }
+#define CONFIG_SYS_DTT_ADM1021		{ { 0x18, 0x02, 0, 1, 0, 85, 1, 0, 58} }
 
 /*-----------------------------------------------------------------------
  * Environment
  *----------------------------------------------------------------------*/
-#define	CFG_ENV_IS_IN_FLASH	1	/* Environment uses flash	*/
+#define	CONFIG_ENV_IS_IN_FLASH	1	/* Environment uses flash	*/
 
 /*
  * Default environment variables
@@ -190,6 +196,7 @@
 /*
  * Commands additional to the ones defined in amcc-common.h
  */
+#define CONFIG_CMD_EXT2
 #define CONFIG_CMD_DATE
 #define CONFIG_CMD_PCI
 #define CONFIG_CMD_SDRAM
@@ -206,26 +213,26 @@
 /*-----------------------------------------------------------------------
  * FLASH related
  *----------------------------------------------------------------------*/
-#define CFG_FLASH_CFI
+#define CONFIG_SYS_FLASH_CFI
 #define CONFIG_FLASH_CFI_DRIVER
-#define CFG_FLASH_EMPTY_INFO		/* print 'E' for empty sector on flinfo */
-#define CFG_FLASH_USE_BUFFER_WRITE 1	/* use buffered writes (20x faster)	*/
+#define CONFIG_SYS_FLASH_EMPTY_INFO		/* print 'E' for empty sector on flinfo */
+#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1	/* use buffered writes (20x faster)	*/
 
-#define CFG_FLASH_BANKS_LIST    {CFG_FLASH_BASE}
-#define CFG_MAX_FLASH_BANKS     1		    /* number of banks	    */
-#define CFG_MAX_FLASH_SECT	1024		    /* sectors per device   */
+#define CONFIG_SYS_FLASH_BANKS_LIST    {CONFIG_SYS_FLASH_BASE}
+#define CONFIG_SYS_MAX_FLASH_BANKS     1		    /* number of banks	    */
+#define CONFIG_SYS_MAX_FLASH_SECT	1024		    /* sectors per device   */
 
-#undef	CFG_FLASH_CHECKSUM
-#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
-#define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
+#undef	CONFIG_SYS_FLASH_CHECKSUM
+#define CONFIG_SYS_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
+#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
 
-#define CFG_ENV_SECT_SIZE	0x20000 /* size of one complete sector	*/
-#define CFG_ENV_ADDR		(CFG_MONITOR_BASE-CFG_ENV_SECT_SIZE)
-#define	CFG_ENV_SIZE		0x4000	/* Total Size of Environment Sector	*/
+#define CONFIG_ENV_SECT_SIZE	0x20000 /* size of one complete sector	*/
+#define CONFIG_ENV_ADDR		(CONFIG_SYS_MONITOR_BASE-CONFIG_ENV_SECT_SIZE)
+#define	CONFIG_ENV_SIZE		0x4000	/* Total Size of Environment Sector	*/
 
 /* Address and size of Redundant Environment Sector	*/
-#define CFG_ENV_ADDR_REDUND	(CFG_ENV_ADDR-CFG_ENV_SECT_SIZE)
-#define CFG_ENV_SIZE_REDUND	(CFG_ENV_SIZE)
+#define CONFIG_ENV_ADDR_REDUND	(CONFIG_ENV_ADDR-CONFIG_ENV_SECT_SIZE)
+#define CONFIG_ENV_SIZE_REDUND	(CONFIG_ENV_SIZE)
 
 /*-----------------------------------------------------------------------
  * PCI stuff
@@ -238,12 +245,12 @@
 #define CONFIG_PCI_CONFIG_HOST_BRIDGE
 
 /* Board-specific PCI */
-#define CFG_PCI_TARGET_INIT		/* let board init pci target    */
-#undef	CFG_PCI_MASTER_INIT
+#define CONFIG_SYS_PCI_TARGET_INIT		/* let board init pci target    */
+#undef	CONFIG_SYS_PCI_MASTER_INIT
 
-#define CFG_PCI_SUBSYS_VENDORID 0x1014	/* IBM				*/
-#define CFG_PCI_SUBSYS_DEVICEID 0xcafe	/* Whatever			*/
-/* #define CFG_PCI_SUBSYS_ID	CFG_PCI_SUBSYS_DEVICEID */
+#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x1014	/* IBM				*/
+#define CONFIG_SYS_PCI_SUBSYS_DEVICEID 0xcafe	/* Whatever			*/
+/* #define CONFIG_SYS_PCI_SUBSYS_ID	CONFIG_SYS_PCI_SUBSYS_DEVICEID */
 
 /*
  *  NETWORK Support (PCI):
@@ -255,8 +262,8 @@
  * Xilinx System ACE support
  *----------------------------------------------------------------------*/
 #define CONFIG_SYSTEMACE	1	/* Enable SystemACE support	*/
-#define CFG_SYSTEMACE_WIDTH	16	/* Data bus width is 16		*/
-#define CFG_SYSTEMACE_BASE	CFG_ACE_BASE
+#define CONFIG_SYS_SYSTEMACE_WIDTH	16	/* Data bus width is 16		*/
+#define CONFIG_SYS_SYSTEMACE_BASE	CONFIG_SYS_ACE_BASE
 #define CONFIG_DOS_PARTITION	1
 
 /*-----------------------------------------------------------------------
@@ -264,7 +271,7 @@
  *----------------------------------------------------------------------*/
 
 /* Memory Bank 0 (Flash) initialization					*/
-#define CFG_EBC_PB0AP		(EBC_BXAP_BME_DISABLED      |		\
+#define CONFIG_SYS_EBC_PB0AP		(EBC_BXAP_BME_DISABLED      |		\
 				 EBC_BXAP_TWT_ENCODE(7)     |		\
 				 EBC_BXAP_BCE_DISABLE       |		\
 				 EBC_BXAP_BCT_2TRANS        |		\
@@ -277,13 +284,13 @@
 				 EBC_BXAP_SOR_DELAYED       |		\
 				 EBC_BXAP_BEM_WRITEONLY     |		\
 				 EBC_BXAP_PEN_DISABLED)
-#define CFG_EBC_PB0CR		(EBC_BXCR_BAS_ENCODE(CFG_FLASH_BASE) |	\
+#define CONFIG_SYS_EBC_PB0CR		(EBC_BXCR_BAS_ENCODE(CONFIG_SYS_FLASH_BASE) |	\
 				 EBC_BXCR_BS_16MB                    |	\
 				 EBC_BXCR_BU_RW                      |	\
 				 EBC_BXCR_BW_16BIT)
 
 /* Memory Bank 1 (Xilinx System ACE controller) initialization		*/
-#define CFG_EBC_PB1AP		(EBC_BXAP_BME_DISABLED      |		\
+#define CONFIG_SYS_EBC_PB1AP		(EBC_BXAP_BME_DISABLED      |		\
 				 EBC_BXAP_TWT_ENCODE(4)     |		\
 				 EBC_BXAP_BCE_DISABLE       |		\
 				 EBC_BXAP_BCT_2TRANS        |		\
@@ -296,7 +303,7 @@
 				 EBC_BXAP_SOR_NONDELAYED    |		\
 				 EBC_BXAP_BEM_WRITEONLY     |		\
 				 EBC_BXAP_PEN_DISABLED)
-#define CFG_EBC_PB1CR		(EBC_BXCR_BAS_ENCODE(CFG_ACE_BASE)  |	\
+#define CONFIG_SYS_EBC_PB1CR		(EBC_BXCR_BAS_ENCODE(CONFIG_SYS_ACE_BASE)  |	\
 				 EBC_BXCR_BS_1MB                    |	\
 				 EBC_BXCR_BU_RW                     |	\
 				 EBC_BXCR_BW_16BIT)
@@ -306,7 +313,7 @@
  * Keep the Default value, but the bit PDT which has to be set to 1 ?TBC
  * default value : 0x07C00000 - 0 0 000 1 1 1 1 1 0000 0 00000 000000000000
  *-------------------------------------------------------------------------*/
-#define CFG_EBC_CFG		(EBC_CFG_LE_UNLOCK    |	\
+#define CONFIG_SYS_EBC_CFG		(EBC_CFG_LE_UNLOCK    |	\
 				 EBC_CFG_PTD_ENABLE   |	\
 				 EBC_CFG_RTC_16PERCLK | \
 				 EBC_CFG_ATC_PREVIOUS | \
@@ -320,17 +327,17 @@
 /*-----------------------------------------------------------------------
  * GPIO Setup
  *----------------------------------------------------------------------*/
-#define CFG_GPIO_PCIE_PRESENT0	17
-#define CFG_GPIO_PCIE_PRESENT1	21
-#define CFG_GPIO_PCIE_PRESENT2	23
-#define CFG_GPIO_RS232_FORCEOFF	30
-
-#define CFG_PFC0		(GPIO_VAL(CFG_GPIO_PCIE_PRESENT0) | \
-				 GPIO_VAL(CFG_GPIO_PCIE_PRESENT1) | \
-				 GPIO_VAL(CFG_GPIO_PCIE_PRESENT2) | \
-				 GPIO_VAL(CFG_GPIO_RS232_FORCEOFF))
-#define CFG_GPIO_OR		GPIO_VAL(CFG_GPIO_RS232_FORCEOFF)
-#define CFG_GPIO_TCR		GPIO_VAL(CFG_GPIO_RS232_FORCEOFF)
-#define CFG_GPIO_ODR		0
+#define CONFIG_SYS_GPIO_PCIE_PRESENT0	17
+#define CONFIG_SYS_GPIO_PCIE_PRESENT1	21
+#define CONFIG_SYS_GPIO_PCIE_PRESENT2	23
+#define CONFIG_SYS_GPIO_RS232_FORCEOFF	30
+
+#define CONFIG_SYS_PFC0		(GPIO_VAL(CONFIG_SYS_GPIO_PCIE_PRESENT0) | \
+				 GPIO_VAL(CONFIG_SYS_GPIO_PCIE_PRESENT1) | \
+				 GPIO_VAL(CONFIG_SYS_GPIO_PCIE_PRESENT2) | \
+				 GPIO_VAL(CONFIG_SYS_GPIO_RS232_FORCEOFF))
+#define CONFIG_SYS_GPIO_OR		GPIO_VAL(CONFIG_SYS_GPIO_RS232_FORCEOFF)
+#define CONFIG_SYS_GPIO_TCR		GPIO_VAL(CONFIG_SYS_GPIO_RS232_FORCEOFF)
+#define CONFIG_SYS_GPIO_ODR		0
 
 #endif	/* __CONFIG_H */
diff --git a/include/configs/kb9202.h b/include/configs/kb9202.h
index e775e6094..1ce8c6974 100644
--- a/include/configs/kb9202.h
+++ b/include/configs/kb9202.h
@@ -51,8 +51,10 @@
 #define CONFIG_INITRD_TAG	1
 
 #define	CONFIG_SKIP_LOWLEVEL_INIT
+#define CONFIG_SKIP_RELOCATE_UBOOT	/* undef this for direct boot from */
+									/* NOR flash without preloader */
 
-#define	CFG_LONGHELP
+#define	CONFIG_SYS_LONGHELP
 
 #ifndef roundup
 #define roundup(x, y) ((((x) + ((y) - 1)) / (y)) * (y))
@@ -60,8 +62,8 @@
 /*
  * Size of malloc() pool
  */
-#define CFG_MALLOC_LEN	(roundup(CFG_ENV_SIZE,4096) + 128*1024)
-#define CFG_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
+#define CONFIG_SYS_MALLOC_LEN	(roundup(CONFIG_ENV_SIZE,4096) + 128*1024)
+#define CONFIG_SYS_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
 
 #define CONFIG_BAUDRATE 115200
 
@@ -109,13 +111,13 @@
 #define PHYS_SDRAM 0x20000000
 #define PHYS_SDRAM_SIZE 0x2000000  /* 32 megs */
 
-#define CFG_MEMTEST_START		PHYS_SDRAM
-#define CFG_MEMTEST_END			CFG_MEMTEST_START + PHYS_SDRAM_SIZE - (512*1024)
+#define CONFIG_SYS_MEMTEST_START		PHYS_SDRAM
+#define CONFIG_SYS_MEMTEST_END			CONFIG_SYS_MEMTEST_START + PHYS_SDRAM_SIZE - (512*1024)
 
 #define CONFIG_DRIVER_ETHER
 #define CONFIG_NET_RETRY_COUNT		20
 
-#define CFG_FLASH_BASE			0x10000000
+#define CONFIG_SYS_FLASH_BASE			0x10000000
 
 #ifdef CONFIG_KB9202
 #define PHYS_FLASH_SIZE			0x1000000
@@ -123,38 +125,38 @@
 #define PHYS_FLASH_SIZE			0x200000
 #endif
 
-#define CFG_MAX_FLASH_BANKS		1
-#define CFG_MAX_FLASH_SECT		256
+#define CONFIG_SYS_MAX_FLASH_BANKS		1
+#define CONFIG_SYS_MAX_FLASH_SECT		256
 
 #define	CONFIG_HARD_I2C
 
-#define	CFG_ENV_IS_IN_EEPROM
+#define	CONFIG_ENV_IS_IN_EEPROM
 
 #ifdef CONFIG_KB9202
-#define CFG_ENV_OFFSET			0x3E00
-#define CFG_ENV_SIZE			0x0200
+#define CONFIG_ENV_OFFSET			0x3E00
+#define CONFIG_ENV_SIZE			0x0200
 #else
-#define CFG_ENV_OFFSET			0x1000
-#define CFG_ENV_SIZE			0x1000
+#define CONFIG_ENV_OFFSET			0x1000
+#define CONFIG_ENV_SIZE			0x1000
 #endif
-#define	CFG_I2C_EEPROM_ADDR		0x50
-#define	CFG_EEPROM_PAGE_WRITE_BITS	6
-#define	CFG_I2C_EEPROM_ADDR_LEN		2
-#define	CFG_I2C_SPEED			50000
-#define	CFG_I2C_SLAVE			0 /* not used */
-#define	CFG_EEPROM_PAGE_WRITE_DELAY_MS	10
+#define	CONFIG_SYS_I2C_EEPROM_ADDR		0x50
+#define	CONFIG_SYS_EEPROM_PAGE_WRITE_BITS	6
+#define	CONFIG_SYS_I2C_EEPROM_ADDR_LEN		2
+#define	CONFIG_SYS_I2C_SPEED			50000
+#define	CONFIG_SYS_I2C_SLAVE			0 /* not used */
+#define	CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	10
 
-#define CFG_LOAD_ADDR		0x21000000  /* default load address */
+#define CONFIG_SYS_LOAD_ADDR		0x21000000  /* default load address */
 
-#define CFG_BAUDRATE_TABLE	{115200 , 19200, 38400, 57600, 9600 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{115200 , 19200, 38400, 57600, 9600 }
 
-#define CFG_PROMPT		"U-Boot> "	/* Monitor Command Prompt */
-#define CFG_CBSIZE		256		/* Console I/O Buffer Size */
-#define CFG_MAXARGS		16		/* max number of command args */
-#define CFG_PBSIZE		(CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define CONFIG_SYS_PROMPT		"U-Boot> "	/* Monitor Command Prompt */
+#define CONFIG_SYS_CBSIZE		256		/* Console I/O Buffer Size */
+#define CONFIG_SYS_MAXARGS		16		/* max number of command args */
+#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
 
 #define	CONFIG_FLASH_CFI_DRIVER
-#define	CFG_FLASH_CFI
+#define	CONFIG_SYS_FLASH_CFI
 
 #ifndef __ASSEMBLY__
 /*-----------------------------------------------------------------------
@@ -175,8 +177,8 @@ struct bd_info_ext {
 };
 #endif
 
-#define CFG_HZ 1000
-#define CFG_HZ_CLOCK AT91C_MASTER_CLOCK/2	/* AT91C_TC0_CMR is implicitly set to */
+#define CONFIG_SYS_HZ 1000
+#define CONFIG_SYS_HZ_CLOCK AT91C_MASTER_CLOCK/2	/* AT91C_TC0_CMR is implicitly set to */
 					/* AT91C_TC_TIMER_DIV1_CLOCK */
 
 #define CONFIG_STACKSIZE	(32*1024)	/* regular stack */
diff --git a/include/configs/kilauea.h b/include/configs/kilauea.h
index a475f97e6..b943f3153 100644
--- a/include/configs/kilauea.h
+++ b/include/configs/kilauea.h
@@ -53,10 +53,10 @@
  * Base addresses -- Note these are effective addresses where the
  * actual resources get mapped (not physical addresses)
  *----------------------------------------------------------------------*/
-#define CFG_FLASH_BASE		0xFC000000
-#define CFG_NAND_ADDR		0xF8000000
-#define CFG_FPGA_BASE		0xF0000000
-#define CFG_PERIPHERAL_BASE	0xEF600000      /* internal peripherals*/
+#define CONFIG_SYS_FLASH_BASE		0xFC000000
+#define CONFIG_SYS_NAND_ADDR		0xF8000000
+#define CONFIG_SYS_FPGA_BASE		0xF0000000
+#define CONFIG_SYS_PERIPHERAL_BASE	0xEF600000      /* internal peripherals*/
 
 /*-----------------------------------------------------------------------
  * Initial RAM & Stack Pointer Configuration Options
@@ -72,25 +72,25 @@
  *   the latter of which is less than desireable since it requires
  *   setting up the SDRAM and ECC in assembly code.
  *
- *   To use (2), define 'CFG_INIT_DCACHE_CS' to be an unused chip
+ *   To use (2), define 'CONFIG_SYS_INIT_DCACHE_CS' to be an unused chip
  *   select on the External Bus Controller (EBC) and then select a
- *   value for 'CFG_INIT_RAM_ADDR' outside of the range of valid,
- *   physical SDRAM. Otherwise, undefine 'CFG_INIT_DCACHE_CS' and
- *   select a value for 'CFG_INIT_RAM_ADDR' within the range of valid,
+ *   value for 'CONFIG_SYS_INIT_RAM_ADDR' outside of the range of valid,
+ *   physical SDRAM. Otherwise, undefine 'CONFIG_SYS_INIT_DCACHE_CS' and
+ *   select a value for 'CONFIG_SYS_INIT_RAM_ADDR' within the range of valid,
  *   physical SDRAM to use (3).
  *-----------------------------------------------------------------------*/
 
-#define CFG_INIT_DCACHE_CS	4
+#define CONFIG_SYS_INIT_DCACHE_CS	4
 
-#if defined(CFG_INIT_DCACHE_CS)
-#define CFG_INIT_RAM_ADDR	(CFG_SDRAM_BASE + ( 1 << 30))	/*  1 GiB */
+#if defined(CONFIG_SYS_INIT_DCACHE_CS)
+#define CONFIG_SYS_INIT_RAM_ADDR	(CONFIG_SYS_SDRAM_BASE + ( 1 << 30))	/*  1 GiB */
 #else
-#define CFG_INIT_RAM_ADDR	(CFG_SDRAM_BASE + (32 << 20))	/* 32 MiB */
-#endif /* defined(CFG_INIT_DCACHE_CS) */
+#define CONFIG_SYS_INIT_RAM_ADDR	(CONFIG_SYS_SDRAM_BASE + (32 << 20))	/* 32 MiB */
+#endif /* defined(CONFIG_SYS_INIT_DCACHE_CS) */
 
-#define CFG_INIT_RAM_END        (4 << 10)			/*  4 KiB */
-#define CFG_GBL_DATA_SIZE	256		/* num bytes initial data */
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_RAM_END        (4 << 10)			/*  4 KiB */
+#define CONFIG_SYS_GBL_DATA_SIZE	256		/* num bytes initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
 
 /*
  * If the data cache is being used for the primordial stack and global
@@ -100,20 +100,20 @@
  * for the POST word.
  */
 
-#if defined(CFG_INIT_DCACHE_CS)
-# define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
-# define CFG_POST_ALT_WORD_ADDR	(CFG_PERIPHERAL_BASE + GPT0_COMP6)
+#if defined(CONFIG_SYS_INIT_DCACHE_CS)
+# define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
+# define CONFIG_SYS_POST_ALT_WORD_ADDR	(CONFIG_SYS_PERIPHERAL_BASE + GPT0_COMP6)
 #else
-# define CFG_INIT_EXTRA_SIZE	16
-# define CFG_INIT_SP_OFFSET	(CFG_GBL_DATA_OFFSET - CFG_INIT_EXTRA_SIZE)
-# define CFG_POST_WORD_ADDR	(CFG_GBL_DATA_OFFSET - 4)
-# define CFG_OCM_DATA_ADDR	CFG_INIT_RAM_ADDR
-#endif /* defined(CFG_INIT_DCACHE_CS) */
+# define CONFIG_SYS_INIT_EXTRA_SIZE	16
+# define CONFIG_SYS_INIT_SP_OFFSET	(CONFIG_SYS_GBL_DATA_OFFSET - CONFIG_SYS_INIT_EXTRA_SIZE)
+# define CONFIG_SYS_POST_WORD_ADDR	(CONFIG_SYS_GBL_DATA_OFFSET - 4)
+# define CONFIG_SYS_OCM_DATA_ADDR	CONFIG_SYS_INIT_RAM_ADDR
+#endif /* defined(CONFIG_SYS_INIT_DCACHE_CS) */
 
 /*-----------------------------------------------------------------------
  * Serial Port
  *----------------------------------------------------------------------*/
-#define CFG_EXT_SERIAL_CLOCK	11059200	/* ext. 11.059MHz clk	*/
+#define CONFIG_SYS_EXT_SERIAL_CLOCK	11059200	/* ext. 11.059MHz clk	*/
 /* define this if you want console on UART1 */
 #undef CONFIG_UART1_CONSOLE
 
@@ -121,37 +121,37 @@
  * Environment
  *----------------------------------------------------------------------*/
 #if !defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL)
-#define CFG_ENV_IS_IN_FLASH     1	/* use FLASH for environment vars	*/
+#define CONFIG_ENV_IS_IN_FLASH     1	/* use FLASH for environment vars	*/
 #else
-#define CFG_ENV_IS_IN_NAND	1	/* use NAND for environment vars	*/
-#define CFG_ENV_IS_EMBEDDED	1	/* use embedded environment */
+#define CONFIG_ENV_IS_IN_NAND	1	/* use NAND for environment vars	*/
+#define CONFIG_ENV_IS_EMBEDDED	1	/* use embedded environment */
 #endif
 
 /*-----------------------------------------------------------------------
  * FLASH related
  *----------------------------------------------------------------------*/
-#define CFG_FLASH_CFI			/* The flash is CFI compatible	*/
+#define CONFIG_SYS_FLASH_CFI			/* The flash is CFI compatible	*/
 #define CONFIG_FLASH_CFI_DRIVER		/* Use common CFI driver	*/
 
-#define CFG_FLASH_BANKS_LIST    {CFG_FLASH_BASE}
-#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
-#define CFG_MAX_FLASH_SECT	512	/* max number of sectors on one chip	*/
+#define CONFIG_SYS_FLASH_BANKS_LIST    {CONFIG_SYS_FLASH_BASE}
+#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
+#define CONFIG_SYS_MAX_FLASH_SECT	512	/* max number of sectors on one chip	*/
 
-#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
-#define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
+#define CONFIG_SYS_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
+#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
 
-#define CFG_FLASH_USE_BUFFER_WRITE 1	/* use buffered writes (20x faster)	*/
-#define CFG_FLASH_EMPTY_INFO		/* print 'E' for empty sector on flinfo */
+#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1	/* use buffered writes (20x faster)	*/
+#define CONFIG_SYS_FLASH_EMPTY_INFO		/* print 'E' for empty sector on flinfo */
 
-#ifdef CFG_ENV_IS_IN_FLASH
-#define CFG_ENV_SECT_SIZE	0x20000	/* size of one complete sector	*/
-#define CFG_ENV_ADDR		(CFG_MONITOR_BASE-CFG_ENV_SECT_SIZE)
-#define	CFG_ENV_SIZE		0x4000	/* Total Size of Environment Sector	*/
+#ifdef CONFIG_ENV_IS_IN_FLASH
+#define CONFIG_ENV_SECT_SIZE	0x20000	/* size of one complete sector	*/
+#define CONFIG_ENV_ADDR		(CONFIG_SYS_MONITOR_BASE-CONFIG_ENV_SECT_SIZE)
+#define	CONFIG_ENV_SIZE		0x4000	/* Total Size of Environment Sector	*/
 
 /* Address and size of Redundant Environment Sector	*/
-#define CFG_ENV_ADDR_REDUND	(CFG_ENV_ADDR-CFG_ENV_SECT_SIZE)
-#define CFG_ENV_SIZE_REDUND	(CFG_ENV_SIZE)
-#endif /* CFG_ENV_IS_IN_FLASH */
+#define CONFIG_ENV_ADDR_REDUND	(CONFIG_ENV_ADDR-CONFIG_ENV_SECT_SIZE)
+#define CONFIG_ENV_SIZE_REDUND	(CONFIG_ENV_SIZE)
+#endif /* CONFIG_ENV_IS_IN_FLASH */
 
 /*
  * IPL (Initial Program Loader, integrated inside CPU)
@@ -171,107 +171,130 @@
  * set up. While still running from location 0xfffff000...0xffffffff the
  * NAND controller cannot be accessed since it is attached to CS0 too.
  */
-#define CFG_NAND_BOOT_SPL_SRC	0xfffff000	/* SPL location			*/
-#define CFG_NAND_BOOT_SPL_SIZE	(4 << 10)	/* SPL size			*/
-#define CFG_NAND_BOOT_SPL_DST	0x00800000	/* Copy SPL here		*/
-#define CFG_NAND_U_BOOT_DST	0x01000000	/* Load NUB to this addr	*/
-#define CFG_NAND_U_BOOT_START	CFG_NAND_U_BOOT_DST /* Start NUB from this addr	*/
-#define CFG_NAND_BOOT_SPL_DELTA	(CFG_NAND_BOOT_SPL_SRC - CFG_NAND_BOOT_SPL_DST)
+#define CONFIG_SYS_NAND_BOOT_SPL_SRC	0xfffff000	/* SPL location			*/
+#define CONFIG_SYS_NAND_BOOT_SPL_SIZE	(4 << 10)	/* SPL size			*/
+#define CONFIG_SYS_NAND_BOOT_SPL_DST	0x00800000	/* Copy SPL here		*/
+#define CONFIG_SYS_NAND_U_BOOT_DST	0x01000000	/* Load NUB to this addr	*/
+#define CONFIG_SYS_NAND_U_BOOT_START	CONFIG_SYS_NAND_U_BOOT_DST /* Start NUB from this addr	*/
+#define CONFIG_SYS_NAND_BOOT_SPL_DELTA	(CONFIG_SYS_NAND_BOOT_SPL_SRC - CONFIG_SYS_NAND_BOOT_SPL_DST)
 
 /*
  * Define the partitioning of the NAND chip (only RAM U-Boot is needed here)
  */
-#define CFG_NAND_U_BOOT_OFFS	(16 << 10)	/* Offset to RAM U-Boot image	*/
-#define CFG_NAND_U_BOOT_SIZE	(384 << 10)	/* Size of RAM U-Boot image	*/
+#define CONFIG_SYS_NAND_U_BOOT_OFFS	(16 << 10)	/* Offset to RAM U-Boot image	*/
+#define CONFIG_SYS_NAND_U_BOOT_SIZE	(384 << 10)	/* Size of RAM U-Boot image	*/
 
 /*
  * Now the NAND chip has to be defined (no autodetection used!)
  */
-#define CFG_NAND_PAGE_SIZE	512		/* NAND chip page size		*/
-#define CFG_NAND_BLOCK_SIZE	(16 << 10)	/* NAND chip block size		*/
-#define CFG_NAND_PAGE_COUNT	32		/* NAND chip page count		*/
-#define CFG_NAND_BAD_BLOCK_POS	5		/* Location of bad block marker	*/
-#define CFG_NAND_4_ADDR_CYCLE	1		/* Fourth addr used (>32MB)	*/
-
-#define CFG_NAND_ECCSIZE	256
-#define CFG_NAND_ECCBYTES	3
-#define CFG_NAND_ECCSTEPS	(CFG_NAND_PAGE_SIZE / CFG_NAND_ECCSIZE)
-#define CFG_NAND_OOBSIZE	16
-#define CFG_NAND_ECCTOTAL	(CFG_NAND_ECCBYTES * CFG_NAND_ECCSTEPS)
-#define CFG_NAND_ECCPOS		{0, 1, 2, 3, 6, 7}
-
-#ifdef CFG_ENV_IS_IN_NAND
+#define CONFIG_SYS_NAND_PAGE_SIZE	512		/* NAND chip page size		*/
+#define CONFIG_SYS_NAND_BLOCK_SIZE	(16 << 10)	/* NAND chip block size		*/
+#define CONFIG_SYS_NAND_PAGE_COUNT	32		/* NAND chip page count		*/
+#define CONFIG_SYS_NAND_BAD_BLOCK_POS	5		/* Location of bad block marker	*/
+#define CONFIG_SYS_NAND_4_ADDR_CYCLE	1		/* Fourth addr used (>32MB)	*/
+
+#define CONFIG_SYS_NAND_ECCSIZE	256
+#define CONFIG_SYS_NAND_ECCBYTES	3
+#define CONFIG_SYS_NAND_ECCSTEPS	(CONFIG_SYS_NAND_PAGE_SIZE / CONFIG_SYS_NAND_ECCSIZE)
+#define CONFIG_SYS_NAND_OOBSIZE	16
+#define CONFIG_SYS_NAND_ECCTOTAL	(CONFIG_SYS_NAND_ECCBYTES * CONFIG_SYS_NAND_ECCSTEPS)
+#define CONFIG_SYS_NAND_ECCPOS		{0, 1, 2, 3, 6, 7}
+
+#ifdef CONFIG_ENV_IS_IN_NAND
 /*
  * For NAND booting the environment is embedded in the U-Boot image. Please take
  * look at the file board/amcc/sequoia/u-boot-nand.lds for details.
  */
-#define CFG_ENV_SIZE		CFG_NAND_BLOCK_SIZE
-#define CFG_ENV_OFFSET		(CFG_NAND_U_BOOT_OFFS + CFG_ENV_SIZE)
-#define CFG_ENV_OFFSET_REDUND	(CFG_ENV_OFFSET + CFG_ENV_SIZE)
+#define CONFIG_ENV_SIZE		CONFIG_SYS_NAND_BLOCK_SIZE
+#define CONFIG_ENV_OFFSET		(CONFIG_SYS_NAND_U_BOOT_OFFS + CONFIG_ENV_SIZE)
+#define CONFIG_ENV_OFFSET_REDUND	(CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)
 #endif
 
 /*-----------------------------------------------------------------------
  * NAND FLASH
  *----------------------------------------------------------------------*/
-#define CFG_MAX_NAND_DEVICE	1
+#define CONFIG_SYS_MAX_NAND_DEVICE	1
 #define NAND_MAX_CHIPS		1
-#define CFG_NAND_BASE		(CFG_NAND_ADDR + CFG_NAND_CS)
-#define CFG_NAND_SELECT_DEVICE  1	/* nand driver supports mutipl. chips	*/
+#define CONFIG_SYS_NAND_BASE		(CONFIG_SYS_NAND_ADDR + CONFIG_SYS_NAND_CS)
+#define CONFIG_SYS_NAND_SELECT_DEVICE  1	/* nand driver supports mutipl. chips	*/
 
 /*-----------------------------------------------------------------------
  * DDR SDRAM
  *----------------------------------------------------------------------*/
-#define CFG_MBYTES_SDRAM        (256)		/* 256MB			*/
+#define CONFIG_SYS_MBYTES_SDRAM        (256)		/* 256MB			*/
 
-#define	CFG_SDRAM0_MB0CF_BASE	((  0 << 20) + CFG_SDRAM_BASE)
+/*
+ * CONFIG_PPC4xx_DDR_AUTOCALIBRATION
+ *
+ * Note: DDR Autocalibration Method_A scans the full range of possible PPC4xx
+ *       SDRAM Controller DDR autocalibration values and takes a lot longer
+ *       to run than Method_B.
+ * (See the Method_A and Method_B algorithm discription in the file:
+ *	cpu/ppc4xx/4xx_ibm_ddr2_autocalib.c)
+ * Define CONFIG_PPC4xx_DDR_METHOD_A to use DDR autocalibration Method_A
+ *
+ * DDR Autocalibration Method_B is the default.
+ */
+#if 0
+/*
+ * Needs FIX!!!
+ * Disable autocalibration for now, because of the unresolved problem
+ * with kilauea board using 200MHz PLB/DDR2 frequency
+ */
+#define	CONFIG_PPC4xx_DDR_AUTOCALIBRATION	/* IBM DDR autocalibration */
+#define	DEBUG_PPC4xx_DDR_AUTOCALIBRATION	/* dynamic DDR autocal debug */
+#undef	CONFIG_PPC4xx_DDR_METHOD_A
+#endif
+
+#define	CONFIG_SYS_SDRAM0_MB0CF_BASE	((  0 << 20) + CONFIG_SYS_SDRAM_BASE)
 
 /* DDR1/2 SDRAM Device Control Register Data Values */
-#define CFG_SDRAM0_MB0CF	((CFG_SDRAM0_MB0CF_BASE >> 3)	| \
+#define CONFIG_SYS_SDRAM0_MB0CF	((CONFIG_SYS_SDRAM0_MB0CF_BASE >> 3)	| \
 				 SDRAM_RXBAS_SDSZ_256MB		| \
 				 SDRAM_RXBAS_SDAM_MODE7		| \
 				 SDRAM_RXBAS_SDBE_ENABLE)
-#define CFG_SDRAM0_MB1CF	SDRAM_RXBAS_SDBE_DISABLE
-#define CFG_SDRAM0_MB2CF	SDRAM_RXBAS_SDBE_DISABLE
-#define CFG_SDRAM0_MB3CF	SDRAM_RXBAS_SDBE_DISABLE
-#define CFG_SDRAM0_MCOPT1	(SDRAM_MCOPT1_PMU_OPEN		| \
+#define CONFIG_SYS_SDRAM0_MB1CF	SDRAM_RXBAS_SDBE_DISABLE
+#define CONFIG_SYS_SDRAM0_MB2CF	SDRAM_RXBAS_SDBE_DISABLE
+#define CONFIG_SYS_SDRAM0_MB3CF	SDRAM_RXBAS_SDBE_DISABLE
+#define CONFIG_SYS_SDRAM0_MCOPT1	(SDRAM_MCOPT1_PMU_OPEN		| \
 				 SDRAM_MCOPT1_8_BANKS		| \
 				 SDRAM_MCOPT1_DDR2_TYPE		| \
 				 SDRAM_MCOPT1_QDEP		| \
 				 SDRAM_MCOPT1_DCOO_DISABLED)
-#define CFG_SDRAM0_MCOPT2	0x00000000
-#define CFG_SDRAM0_MODT0	(SDRAM_MODT_EB0W_ENABLE | \
+#define CONFIG_SYS_SDRAM0_MCOPT2	0x00000000
+#define CONFIG_SYS_SDRAM0_MODT0	(SDRAM_MODT_EB0W_ENABLE | \
 				 SDRAM_MODT_EB0R_ENABLE)
-#define CFG_SDRAM0_MODT1	0x00000000
-#define CFG_SDRAM0_CODT		(SDRAM_CODT_RK0R_ON		| \
+#define CONFIG_SYS_SDRAM0_MODT1	0x00000000
+#define CONFIG_SYS_SDRAM0_CODT		(SDRAM_CODT_RK0R_ON		| \
 				 SDRAM_CODT_CKLZ_36OHM		| \
 				 SDRAM_CODT_DQS_1_8_V_DDR2	| \
 				 SDRAM_CODT_IO_NMODE)
-#define CFG_SDRAM0_RTR		SDRAM_RTR_RINT_ENCODE(1560)
-#define CFG_SDRAM0_INITPLR0	(SDRAM_INITPLR_ENABLE			| \
+#define CONFIG_SYS_SDRAM0_RTR		SDRAM_RTR_RINT_ENCODE(1560)
+#define CONFIG_SYS_SDRAM0_INITPLR0	(SDRAM_INITPLR_ENABLE			| \
 		SDRAM_INITPLR_IMWT_ENCODE(80)				| \
 		SDRAM_INITPLR_ICMD_ENCODE(JEDEC_CMD_NOP))
-#define CFG_SDRAM0_INITPLR1	(SDRAM_INITPLR_ENABLE			| \
+#define CONFIG_SYS_SDRAM0_INITPLR1	(SDRAM_INITPLR_ENABLE			| \
 		SDRAM_INITPLR_IMWT_ENCODE(3)				| \
 		SDRAM_INITPLR_ICMD_ENCODE(JEDEC_CMD_PRECHARGE)		| \
 		SDRAM_INITPLR_IBA_ENCODE(JEDEC_BA_MR)			| \
 		SDRAM_INITPLR_IMA_ENCODE(JEDEC_MA_PRECHARGE_ALL))
-#define CFG_SDRAM0_INITPLR2	(SDRAM_INITPLR_ENABLE			| \
+#define CONFIG_SYS_SDRAM0_INITPLR2	(SDRAM_INITPLR_ENABLE			| \
 		SDRAM_INITPLR_IMWT_ENCODE(2)				| \
 		SDRAM_INITPLR_ICMD_ENCODE(JEDEC_CMD_EMR)		| \
 		SDRAM_INITPLR_IBA_ENCODE(JEDEC_BA_EMR2)			| \
 		SDRAM_INITPLR_IMA_ENCODE(JEDEC_MA_EMR2_TEMP_COMMERCIAL))
-#define CFG_SDRAM0_INITPLR3	(SDRAM_INITPLR_ENABLE			| \
+#define CONFIG_SYS_SDRAM0_INITPLR3	(SDRAM_INITPLR_ENABLE			| \
 		SDRAM_INITPLR_IMWT_ENCODE(2)				| \
 		SDRAM_INITPLR_ICMD_ENCODE(JEDEC_CMD_EMR)		| \
 		SDRAM_INITPLR_IBA_ENCODE(JEDEC_BA_EMR3)			| \
 		SDRAM_INITPLR_IMA_ENCODE(0))
-#define CFG_SDRAM0_INITPLR4	(SDRAM_INITPLR_ENABLE			| \
+#define CONFIG_SYS_SDRAM0_INITPLR4	(SDRAM_INITPLR_ENABLE			| \
 		SDRAM_INITPLR_IMWT_ENCODE(2)				| \
 		SDRAM_INITPLR_ICMD_ENCODE(JEDEC_CMD_EMR)		| \
 		SDRAM_INITPLR_IBA_ENCODE(JEDEC_BA_EMR)			| \
 		SDRAM_INITPLR_IMA_ENCODE(JEDEC_MA_EMR_DQS_DISABLE | \
 					 JEDEC_MA_EMR_RTT_75OHM))
-#define CFG_SDRAM0_INITPLR5	(SDRAM_INITPLR_ENABLE			| \
+#define CONFIG_SYS_SDRAM0_INITPLR5	(SDRAM_INITPLR_ENABLE			| \
 		SDRAM_INITPLR_IMWT_ENCODE(2)				| \
 		SDRAM_INITPLR_ICMD_ENCODE(JEDEC_CMD_EMR)		| \
 		SDRAM_INITPLR_IBA_ENCODE(JEDEC_BA_MR)			| \
@@ -279,31 +302,31 @@
 					 JEDEC_MA_MR_CL_DDR2_4_0_CLK | \
 					 JEDEC_MA_MR_BLEN_4 | \
 					 JEDEC_MA_MR_DLL_RESET))
-#define CFG_SDRAM0_INITPLR6	(SDRAM_INITPLR_ENABLE			| \
+#define CONFIG_SYS_SDRAM0_INITPLR6	(SDRAM_INITPLR_ENABLE			| \
 		SDRAM_INITPLR_IMWT_ENCODE(3)				| \
 		SDRAM_INITPLR_ICMD_ENCODE(JEDEC_CMD_PRECHARGE)		| \
 		SDRAM_INITPLR_IBA_ENCODE(0x0)				| \
 		SDRAM_INITPLR_IMA_ENCODE(JEDEC_MA_PRECHARGE_ALL))
-#define CFG_SDRAM0_INITPLR7	(SDRAM_INITPLR_ENABLE			| \
+#define CONFIG_SYS_SDRAM0_INITPLR7	(SDRAM_INITPLR_ENABLE			| \
 		SDRAM_INITPLR_IMWT_ENCODE(26)				| \
 		SDRAM_INITPLR_ICMD_ENCODE(JEDEC_CMD_REFRESH))
-#define CFG_SDRAM0_INITPLR8	(SDRAM_INITPLR_ENABLE			| \
+#define CONFIG_SYS_SDRAM0_INITPLR8	(SDRAM_INITPLR_ENABLE			| \
 		SDRAM_INITPLR_IMWT_ENCODE(26)				| \
 		SDRAM_INITPLR_ICMD_ENCODE(JEDEC_CMD_REFRESH))
-#define CFG_SDRAM0_INITPLR9	(SDRAM_INITPLR_ENABLE			| \
+#define CONFIG_SYS_SDRAM0_INITPLR9	(SDRAM_INITPLR_ENABLE			| \
 		SDRAM_INITPLR_IMWT_ENCODE(26)				| \
 		SDRAM_INITPLR_ICMD_ENCODE(JEDEC_CMD_REFRESH))
-#define CFG_SDRAM0_INITPLR10	(SDRAM_INITPLR_ENABLE			| \
+#define CONFIG_SYS_SDRAM0_INITPLR10	(SDRAM_INITPLR_ENABLE			| \
 		SDRAM_INITPLR_IMWT_ENCODE(26)				| \
 		SDRAM_INITPLR_ICMD_ENCODE(JEDEC_CMD_REFRESH))
-#define CFG_SDRAM0_INITPLR11	(SDRAM_INITPLR_ENABLE			| \
+#define CONFIG_SYS_SDRAM0_INITPLR11	(SDRAM_INITPLR_ENABLE			| \
 		SDRAM_INITPLR_IMWT_ENCODE(2)				| \
 		SDRAM_INITPLR_ICMD_ENCODE(JEDEC_CMD_EMR)		| \
 		SDRAM_INITPLR_IBA_ENCODE(JEDEC_BA_MR)			| \
 		SDRAM_INITPLR_IMA_ENCODE(JEDEC_MA_MR_WR_DDR2_3_CYC | \
 					 JEDEC_MA_MR_CL_DDR2_4_0_CLK | \
 					 JEDEC_MA_MR_BLEN_4))
-#define CFG_SDRAM0_INITPLR12	(SDRAM_INITPLR_ENABLE			| \
+#define CONFIG_SYS_SDRAM0_INITPLR12	(SDRAM_INITPLR_ENABLE			| \
 		SDRAM_INITPLR_IMWT_ENCODE(2)				| \
 		SDRAM_INITPLR_ICMD_ENCODE(JEDEC_CMD_EMR)		| \
 		SDRAM_INITPLR_IBA_ENCODE(JEDEC_BA_EMR)			| \
@@ -312,7 +335,7 @@
 					 JEDEC_MA_EMR_DQS_DISABLE | \
 					 JEDEC_MA_EMR_RTT_DISABLED | \
 					 JEDEC_MA_EMR_ODS_NORMAL))
-#define CFG_SDRAM0_INITPLR13	(SDRAM_INITPLR_ENABLE			| \
+#define CONFIG_SYS_SDRAM0_INITPLR13	(SDRAM_INITPLR_ENABLE			| \
 		SDRAM_INITPLR_IMWT_ENCODE(2)				| \
 		SDRAM_INITPLR_ICMD_ENCODE(JEDEC_CMD_EMR)		| \
 		SDRAM_INITPLR_IBA_ENCODE(JEDEC_BA_EMR)			| \
@@ -321,54 +344,54 @@
 					 JEDEC_MA_EMR_DQS_DISABLE | \
 					 JEDEC_MA_EMR_RTT_DISABLED | \
 					 JEDEC_MA_EMR_ODS_NORMAL))
-#define CFG_SDRAM0_INITPLR14	(SDRAM_INITPLR_DISABLE)
-#define CFG_SDRAM0_INITPLR15	(SDRAM_INITPLR_DISABLE)
-#define CFG_SDRAM0_RQDC		(SDRAM_RQDC_RQDE_ENABLE | \
+#define CONFIG_SYS_SDRAM0_INITPLR14	(SDRAM_INITPLR_DISABLE)
+#define CONFIG_SYS_SDRAM0_INITPLR15	(SDRAM_INITPLR_DISABLE)
+#define CONFIG_SYS_SDRAM0_RQDC		(SDRAM_RQDC_RQDE_ENABLE | \
 				 SDRAM_RQDC_RQFD_ENCODE(56))
-#define CFG_SDRAM0_RFDC		SDRAM_RFDC_RFFD_ENCODE(521)
-#define CFG_SDRAM0_RDCC		(SDRAM_RDCC_RDSS_T2)
-#define CFG_SDRAM0_DLCR		(SDRAM_DLCR_DCLM_AUTO		| \
+#define CONFIG_SYS_SDRAM0_RFDC		SDRAM_RFDC_RFFD_ENCODE(521)
+#define CONFIG_SYS_SDRAM0_RDCC		(SDRAM_RDCC_RDSS_T2)
+#define CONFIG_SYS_SDRAM0_DLCR		(SDRAM_DLCR_DCLM_AUTO		| \
 				 SDRAM_DLCR_DLCS_CONT_DONE	| \
 				 SDRAM_DLCR_DLCV_ENCODE(165))
-#define CFG_SDRAM0_CLKTR	(SDRAM_CLKTR_CLKP_180_DEG_ADV)
-#define CFG_SDRAM0_WRDTR	0x00000000
-#define CFG_SDRAM0_SDTR1	(SDRAM_SDTR1_LDOF_2_CLK	| \
+#define CONFIG_SYS_SDRAM0_CLKTR	(SDRAM_CLKTR_CLKP_180_DEG_ADV)
+#define CONFIG_SYS_SDRAM0_WRDTR	0x00000000
+#define CONFIG_SYS_SDRAM0_SDTR1	(SDRAM_SDTR1_LDOF_2_CLK	| \
 				 SDRAM_SDTR1_RTW_2_CLK	| \
 				 SDRAM_SDTR1_RTRO_1_CLK)
-#define CFG_SDRAM0_SDTR2	(SDRAM_SDTR2_RCD_3_CLK		| \
+#define CONFIG_SYS_SDRAM0_SDTR2	(SDRAM_SDTR2_RCD_3_CLK		| \
 				 SDRAM_SDTR2_WTR_2_CLK		| \
 				 SDRAM_SDTR2_XSNR_32_CLK	| \
 				 SDRAM_SDTR2_WPC_4_CLK		| \
 				 SDRAM_SDTR2_RPC_2_CLK		| \
 				 SDRAM_SDTR2_RP_3_CLK		| \
 				 SDRAM_SDTR2_RRD_2_CLK)
-#define CFG_SDRAM0_SDTR3	(SDRAM_SDTR3_RAS_ENCODE(8)	| \
+#define CONFIG_SYS_SDRAM0_SDTR3	(SDRAM_SDTR3_RAS_ENCODE(8)	| \
 				 SDRAM_SDTR3_RC_ENCODE(11)	| \
 				 SDRAM_SDTR3_XCS		| \
 				 SDRAM_SDTR3_RFC_ENCODE(26))
-#define CFG_SDRAM0_MMODE	(SDRAM_MMODE_WR_DDR2_3_CYC | \
+#define CONFIG_SYS_SDRAM0_MMODE	(SDRAM_MMODE_WR_DDR2_3_CYC | \
 				 SDRAM_MMODE_DCL_DDR2_4_0_CLK | \
 				 SDRAM_MMODE_BLEN_4)
-#define CFG_SDRAM0_MEMODE	(SDRAM_MEMODE_DQS_DISABLE | \
+#define CONFIG_SYS_SDRAM0_MEMODE	(SDRAM_MEMODE_DQS_DISABLE | \
 				 SDRAM_MEMODE_RTT_75OHM)
 
 /*-----------------------------------------------------------------------
  * I2C
  *----------------------------------------------------------------------*/
-#define CFG_I2C_SPEED		400000	/* I2C speed and slave address	*/
+#define CONFIG_SYS_I2C_SPEED		400000	/* I2C speed and slave address	*/
 
-#define CFG_EEPROM_PAGE_WRITE_DELAY_MS	6	/* 24C02 requires 5ms delay */
-#define CFG_I2C_EEPROM_ADDR	0x52	/* I2C boot EEPROM (24C02BN)	*/
-#define CFG_I2C_EEPROM_ADDR_LEN	1	/* Bytes of address		*/
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	6	/* 24C02 requires 5ms delay */
+#define CONFIG_SYS_I2C_EEPROM_ADDR	0x52	/* I2C boot EEPROM (24C02BN)	*/
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN	1	/* Bytes of address		*/
 
 /* Standard DTT sensor configuration */
 #define CONFIG_DTT_DS1775	1
 #define CONFIG_DTT_SENSORS	{ 0 }
-#define CFG_I2C_DTT_ADDR	0x48
+#define CONFIG_SYS_I2C_DTT_ADDR	0x48
 
 /* RTC configuration */
 #define CONFIG_RTC_DS1338	1
-#define CFG_I2C_RTC_ADDR	0x68
+#define CONFIG_SYS_I2C_RTC_ADDR	0x68
 
 /*-----------------------------------------------------------------------
  * Ethernet
@@ -386,6 +409,9 @@
 #define CONFIG_HAS_ETH1		1	/* add support for "eth1addr"   */
 #define CONFIG_PHY1_ADDR	2
 
+/* Debug messages for the DDR autocalibration */
+#define CONFIG_AUTOCALIB		"silent\0"  /* default is non-verbose */
+
 /*
  * Default environment variables
  */
@@ -413,20 +439,20 @@
 #define CONFIG_CMD_SNTP
 
 /* POST support */
-#define CONFIG_POST		(CFG_POST_CACHE		| \
-				 CFG_POST_CPU		| \
-				 CFG_POST_ETHER		| \
-				 CFG_POST_I2C		| \
-				 CFG_POST_MEMORY	| \
-				 CFG_POST_UART)
+#define CONFIG_POST		(CONFIG_SYS_POST_CACHE		| \
+				 CONFIG_SYS_POST_CPU		| \
+				 CONFIG_SYS_POST_ETHER		| \
+				 CONFIG_SYS_POST_I2C		| \
+				 CONFIG_SYS_POST_MEMORY	| \
+				 CONFIG_SYS_POST_UART)
 
 /* Define here the base-addresses of the UARTs to test in POST */
-#define CFG_POST_UART_TABLE	{UART0_BASE, UART1_BASE}
+#define CONFIG_SYS_POST_UART_TABLE	{UART0_BASE, UART1_BASE}
 
 #define CONFIG_LOGBUFFER
-#define CFG_POST_CACHE_ADDR	0x00800000 /* free virtual address	*/
+#define CONFIG_SYS_POST_CACHE_ADDR	0x00800000 /* free virtual address	*/
 
-#define CFG_CONSOLE_IS_IN_ENV /* Otherwise it catches logbuffer as output */
+#define CONFIG_SYS_CONSOLE_IS_IN_ENV /* Otherwise it catches logbuffer as output */
 
 /*-----------------------------------------------------------------------
  * PCI stuff
@@ -439,59 +465,59 @@
 /*-----------------------------------------------------------------------
  * PCIe stuff
  *----------------------------------------------------------------------*/
-#define CFG_PCIE_MEMBASE	0x90000000	/* mapped PCIe memory	*/
-#define CFG_PCIE_MEMSIZE	0x08000000      /* 128 Meg, smallest incr per port */
+#define CONFIG_SYS_PCIE_MEMBASE	0x90000000	/* mapped PCIe memory	*/
+#define CONFIG_SYS_PCIE_MEMSIZE	0x08000000      /* 128 Meg, smallest incr per port */
 
-#define	CFG_PCIE0_CFGBASE	0xa0000000      /* remote access */
-#define	CFG_PCIE0_XCFGBASE	0xb0000000      /* local access */
-#define	CFG_PCIE0_CFGMASK	0xe0000001      /* 512 Meg */
+#define	CONFIG_SYS_PCIE0_CFGBASE	0xa0000000      /* remote access */
+#define	CONFIG_SYS_PCIE0_XCFGBASE	0xb0000000      /* local access */
+#define	CONFIG_SYS_PCIE0_CFGMASK	0xe0000001      /* 512 Meg */
 
-#define	CFG_PCIE1_CFGBASE	0xc0000000      /* remote access */
-#define	CFG_PCIE1_XCFGBASE	0xd0000000      /* local access */
-#define	CFG_PCIE1_CFGMASK	0xe0000001      /* 512 Meg */
+#define	CONFIG_SYS_PCIE1_CFGBASE	0xc0000000      /* remote access */
+#define	CONFIG_SYS_PCIE1_XCFGBASE	0xd0000000      /* local access */
+#define	CONFIG_SYS_PCIE1_CFGMASK	0xe0000001      /* 512 Meg */
 
-#define	CFG_PCIE0_UTLBASE	0xef502000
-#define	CFG_PCIE1_UTLBASE	0xef503000
+#define	CONFIG_SYS_PCIE0_UTLBASE	0xef502000
+#define	CONFIG_SYS_PCIE1_UTLBASE	0xef503000
 
 /* base address of inbound PCIe window */
-#define CFG_PCIE_INBOUND_BASE	0x0000000000000000ULL
+#define CONFIG_SYS_PCIE_INBOUND_BASE	0x0000000000000000ULL
 
 /*-----------------------------------------------------------------------
  * External Bus Controller (EBC) Setup
  *----------------------------------------------------------------------*/
 #if defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_NAND_SPL)
 /* booting from NAND, so NAND chips select has to be on CS 0 */
-#define CFG_NAND_CS		0		/* NAND chip connected to CSx	*/
+#define CONFIG_SYS_NAND_CS		0		/* NAND chip connected to CSx	*/
 
 /* Memory Bank 1 (NOR-FLASH) initialization					*/
-#define CFG_EBC_PB1AP		0x05806500
-#define CFG_EBC_PB1CR           0xFC0DA000  /* BAS=0xFC0,BS=64MB,BU=R/W,BW=16bit*/
+#define CONFIG_SYS_EBC_PB1AP		0x05806500
+#define CONFIG_SYS_EBC_PB1CR           0xFC0DA000  /* BAS=0xFC0,BS=64MB,BU=R/W,BW=16bit*/
 
 /* Memory Bank 0 (NAND-FLASH) initialization					*/
-#define CFG_EBC_PB0AP		0x018003c0
-#define CFG_EBC_PB0CR		(CFG_NAND_ADDR | 0x1e000)
+#define CONFIG_SYS_EBC_PB0AP		0x018003c0
+#define CONFIG_SYS_EBC_PB0CR		(CONFIG_SYS_NAND_ADDR | 0x1e000)
 #else
-#define CFG_NAND_CS		1		/* NAND chip connected to CSx	*/
+#define CONFIG_SYS_NAND_CS		1		/* NAND chip connected to CSx	*/
 
 /* Memory Bank 0 (NOR-FLASH) initialization					*/
-#define CFG_EBC_PB0AP		0x05806500
-#define CFG_EBC_PB0CR           0xFC0DA000  /* BAS=0xFC0,BS=64MB,BU=R/W,BW=16bit*/
+#define CONFIG_SYS_EBC_PB0AP		0x05806500
+#define CONFIG_SYS_EBC_PB0CR           0xFC0DA000  /* BAS=0xFC0,BS=64MB,BU=R/W,BW=16bit*/
 
 /* Memory Bank 1 (NAND-FLASH) initialization					*/
-#define CFG_EBC_PB1AP		0x018003c0
-#define CFG_EBC_PB1CR		(CFG_NAND_ADDR | 0x1e000)
+#define CONFIG_SYS_EBC_PB1AP		0x018003c0
+#define CONFIG_SYS_EBC_PB1CR		(CONFIG_SYS_NAND_ADDR | 0x1e000)
 #endif
 
 /* Memory Bank 2 (FPGA) initialization						*/
-#define CFG_EBC_PB2AP           0x9400C800
-#define CFG_EBC_PB2CR		(CFG_FPGA_BASE | 0x18000)
+#define CONFIG_SYS_EBC_PB2AP           0x9400C800
+#define CONFIG_SYS_EBC_PB2CR		(CONFIG_SYS_FPGA_BASE | 0x18000)
 
-#define CFG_EBC_CFG		0x7FC00000 /*  EBC0_CFG */
+#define CONFIG_SYS_EBC_CFG		0x7FC00000 /*  EBC0_CFG */
 
 /*-----------------------------------------------------------------------
  * GPIO Setup
  *----------------------------------------------------------------------*/
-#define CFG_4xx_GPIO_TABLE { /*	  Out		  GPIO	Alternate1	Alternate2	Alternate3 */ \
+#define CONFIG_SYS_4xx_GPIO_TABLE { /*	  Out		  GPIO	Alternate1	Alternate2	Alternate3 */ \
 {											\
 /* GPIO Core 0 */									\
 {GPIO0_BASE, GPIO_IN,  GPIO_SEL,  GPIO_OUT_0}, /* GPIO0	EBC_DATA_PAR(0)			*/	\
@@ -532,36 +558,36 @@
 /*-----------------------------------------------------------------------
  * Some Kilauea stuff..., mainly fpga registers
  */
-#define CFG_FPGA_REG_BASE		CFG_FPGA_BASE
-#define CFG_FPGA_FIFO_BASE		(in32(CFG_FPGA_BASE) | (1 << 10))
+#define CONFIG_SYS_FPGA_REG_BASE		CONFIG_SYS_FPGA_BASE
+#define CONFIG_SYS_FPGA_FIFO_BASE		(in32(CONFIG_SYS_FPGA_BASE) | (1 << 10))
 
 /* interrupt */
-#define CFG_FPGA_SLIC0_R_DPRAM_INT	0x80000000
-#define CFG_FPGA_SLIC0_W_DPRAM_INT	0x40000000
-#define CFG_FPGA_SLIC1_R_DPRAM_INT	0x20000000
-#define CFG_FPGA_SLIC1_W_DPRAM_INT	0x10000000
-#define CFG_FPGA_PHY0_INT		0x08000000
-#define CFG_FPGA_PHY1_INT		0x04000000
-#define CFG_FPGA_SLIC0_INT		0x02000000
-#define CFG_FPGA_SLIC1_INT		0x01000000
+#define CONFIG_SYS_FPGA_SLIC0_R_DPRAM_INT	0x80000000
+#define CONFIG_SYS_FPGA_SLIC0_W_DPRAM_INT	0x40000000
+#define CONFIG_SYS_FPGA_SLIC1_R_DPRAM_INT	0x20000000
+#define CONFIG_SYS_FPGA_SLIC1_W_DPRAM_INT	0x10000000
+#define CONFIG_SYS_FPGA_PHY0_INT		0x08000000
+#define CONFIG_SYS_FPGA_PHY1_INT		0x04000000
+#define CONFIG_SYS_FPGA_SLIC0_INT		0x02000000
+#define CONFIG_SYS_FPGA_SLIC1_INT		0x01000000
 
 /* DPRAM setting */
 /* 00: 32B; 01: 64B; 10: 128B; 11: 256B  */
-#define CFG_FPGA_DPRAM_R_INT_LINE	0x00400000	/* 64 B */
-#define CFG_FPGA_DPRAM_W_INT_LINE	0x00100000	/* 64 B */
-#define CFG_FPGA_DPRAM_RW_TYPE		0x00080000
-#define CFG_FPGA_DPRAM_RST		0x00040000
-#define CFG_FPGA_UART0_FO		0x00020000
-#define CFG_FPGA_UART1_FO		0x00010000
+#define CONFIG_SYS_FPGA_DPRAM_R_INT_LINE	0x00400000	/* 64 B */
+#define CONFIG_SYS_FPGA_DPRAM_W_INT_LINE	0x00100000	/* 64 B */
+#define CONFIG_SYS_FPGA_DPRAM_RW_TYPE		0x00080000
+#define CONFIG_SYS_FPGA_DPRAM_RST		0x00040000
+#define CONFIG_SYS_FPGA_UART0_FO		0x00020000
+#define CONFIG_SYS_FPGA_UART1_FO		0x00010000
 
 /* loopback */
-#define CFG_FPGA_CHIPSIDE_LOOPBACK	0x00004000
-#define CFG_FPGA_LINESIDE_LOOPBACK	0x00008000
-#define CFG_FPGA_SLIC0_ENABLE		0x00002000
-#define CFG_FPGA_SLIC1_ENABLE		0x00001000
-#define CFG_FPGA_SLIC0_CS		0x00000800
-#define CFG_FPGA_SLIC1_CS		0x00000400
-#define CFG_FPGA_USER_LED0		0x00000200
-#define CFG_FPGA_USER_LED1		0x00000100
+#define CONFIG_SYS_FPGA_CHIPSIDE_LOOPBACK	0x00004000
+#define CONFIG_SYS_FPGA_LINESIDE_LOOPBACK	0x00008000
+#define CONFIG_SYS_FPGA_SLIC0_ENABLE		0x00002000
+#define CONFIG_SYS_FPGA_SLIC1_ENABLE		0x00001000
+#define CONFIG_SYS_FPGA_SLIC0_CS		0x00000800
+#define CONFIG_SYS_FPGA_SLIC1_CS		0x00000400
+#define CONFIG_SYS_FPGA_USER_LED0		0x00000200
+#define CONFIG_SYS_FPGA_USER_LED1		0x00000100
 
 #endif	/* __CONFIG_H */
diff --git a/include/configs/korat.h b/include/configs/korat.h
index a887446f2..d56da1448 100644
--- a/include/configs/korat.h
+++ b/include/configs/korat.h
@@ -54,98 +54,98 @@
  * Base addresses -- Note these are effective addresses where the actual
  * resources get mapped (not physical addresses).
  */
-#define CFG_MONITOR_LEN		(384 * 1024) /* Reserve 384 kiB for Monitor  */
-#define CFG_MALLOC_LEN		(256 * 1024) /* Reserve 256 kiB for malloc() */
-
-#define CFG_SDRAM_BASE		0x00000000	/* _must_ be 0		*/
-#define CFG_FLASH0_SIZE		0x01000000
-#define CFG_FLASH0_ADDR		(-CFG_FLASH0_SIZE)
-#define CFG_FLASH1_TOP		0xF8000000
-#define CFG_FLASH1_MAX_SIZE	0x08000000
-#define CFG_FLASH1_ADDR		(CFG_FLASH1_TOP - CFG_FLASH1_MAX_SIZE)
-#define CFG_FLASH_BASE		CFG_FLASH1_ADDR	/* start of FLASH	*/
-#define CFG_MONITOR_BASE	TEXT_BASE
-#define CFG_OCM_BASE		0xe0010000	/* ocm			*/
-#define CFG_OCM_DATA_ADDR	CFG_OCM_BASE
-#define CFG_PCI_BASE		0xe0000000	/* Internal PCI regs	*/
-#define CFG_PCI_MEMBASE		0x80000000	/* mapped pci memory	*/
+#define CONFIG_SYS_MONITOR_LEN		(384 * 1024) /* Reserve 384 kiB for Monitor  */
+#define CONFIG_SYS_MALLOC_LEN		(256 * 1024) /* Reserve 256 kiB for malloc() */
+
+#define CONFIG_SYS_SDRAM_BASE		0x00000000	/* _must_ be 0		*/
+#define CONFIG_SYS_FLASH0_SIZE		0x01000000
+#define CONFIG_SYS_FLASH0_ADDR		(-CONFIG_SYS_FLASH0_SIZE)
+#define CONFIG_SYS_FLASH1_TOP		0xF8000000
+#define CONFIG_SYS_FLASH1_MAX_SIZE	0x08000000
+#define CONFIG_SYS_FLASH1_ADDR		(CONFIG_SYS_FLASH1_TOP - CONFIG_SYS_FLASH1_MAX_SIZE)
+#define CONFIG_SYS_FLASH_BASE		CONFIG_SYS_FLASH1_ADDR	/* start of FLASH	*/
+#define CONFIG_SYS_MONITOR_BASE	TEXT_BASE
+#define CONFIG_SYS_OCM_BASE		0xe0010000	/* ocm			*/
+#define CONFIG_SYS_OCM_DATA_ADDR	CONFIG_SYS_OCM_BASE
+#define CONFIG_SYS_PCI_BASE		0xe0000000	/* Internal PCI regs	*/
+#define CONFIG_SYS_PCI_MEMBASE		0x80000000	/* mapped pci memory	*/
 
 /* Don't change either of these */
-#define CFG_PERIPHERAL_BASE	0xef600000	/* internal peripherals	*/
+#define CONFIG_SYS_PERIPHERAL_BASE	0xef600000	/* internal peripherals	*/
 
-#define CFG_USB2D0_BASE		0xe0000100
-#define CFG_USB_DEVICE		0xe0000000
-#define CFG_USB_HOST		0xe0000400
-#define CFG_CPLD_BASE		0xc0000000
+#define CONFIG_SYS_USB2D0_BASE		0xe0000100
+#define CONFIG_SYS_USB_DEVICE		0xe0000000
+#define CONFIG_SYS_USB_HOST		0xe0000400
+#define CONFIG_SYS_CPLD_BASE		0xc0000000
 
 /*
  * Initial RAM & stack pointer
  */
 /* 440EPx has 16KB of internal SRAM, so no need for D-Cache		*/
-#undef CFG_INIT_RAM_DCACHE
-#define CFG_INIT_RAM_ADDR	CFG_OCM_BASE	/* OCM			*/
-#define CFG_INIT_RAM_END	(4 << 10)
-#define CFG_GBL_DATA_SIZE	256	/* num bytes initial data	*/
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP_OFFSET	CFG_POST_WORD_ADDR
+#undef CONFIG_SYS_INIT_RAM_DCACHE
+#define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_OCM_BASE	/* OCM			*/
+#define CONFIG_SYS_INIT_RAM_END	(4 << 10)
+#define CONFIG_SYS_GBL_DATA_SIZE	256	/* num bytes initial data	*/
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_POST_WORD_ADDR
 
 /*
  * Serial Port
  */
-#define CFG_EXT_SERIAL_CLOCK	11059200	/* ext. 11.059MHz clk	*/
+#define CONFIG_SYS_EXT_SERIAL_CLOCK	11059200	/* ext. 11.059MHz clk	*/
 #define CONFIG_BAUDRATE		115200
 #define CONFIG_SERIAL_MULTI	1
 /* define this if you want console on UART1 */
 #undef CONFIG_UART1_CONSOLE
 
-#define CFG_BAUDRATE_TABLE						\
+#define CONFIG_SYS_BAUDRATE_TABLE						\
 	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
 
 /*
  * Environment
  */
-#define CFG_ENV_IS_IN_FLASH	1	/* use FLASH for environ vars	*/
+#define CONFIG_ENV_IS_IN_FLASH	1	/* use FLASH for environ vars	*/
 
 /*
  * FLASH related
  */
-#define CFG_FLASH_CFI			/* The flash is CFI compatible	      */
+#define CONFIG_SYS_FLASH_CFI			/* The flash is CFI compatible	      */
 #define CONFIG_FLASH_CFI_DRIVER		/* Use common CFI driver	      */
 #define CONFIG_FLASH_CFI_LEGACY		/* Allow hard-coded config for FLASH0 */
 
-#define CFG_FLASH_BANKS_LIST	{ CFG_FLASH1_ADDR, CFG_FLASH0_ADDR }
+#define CONFIG_SYS_FLASH_BANKS_LIST	{ CONFIG_SYS_FLASH1_ADDR, CONFIG_SYS_FLASH0_ADDR }
 
-#define CFG_MAX_FLASH_BANKS	2	/* max number of memory banks	      */
-#define CFG_MAX_FLASH_SECT	1024	/* max number of sectors on one chip  */
+#define CONFIG_SYS_MAX_FLASH_BANKS	2	/* max number of memory banks	      */
+#define CONFIG_SYS_MAX_FLASH_SECT	1024	/* max number of sectors on one chip  */
 
-#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)    */
-#define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)    */
+#define CONFIG_SYS_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)    */
+#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)    */
 
-#define CFG_FLASH_USE_BUFFER_WRITE 1	/* use buffered writes (20x faster)   */
-#define CFG_FLASH_PROTECTION	1	/* use hardware flash protection      */
+#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1	/* use buffered writes (20x faster)   */
+#define CONFIG_SYS_FLASH_PROTECTION	1	/* use hardware flash protection      */
 
-#define CFG_FLASH_EMPTY_INFO	      /* print 'E' for empty sector on flinfo */
-#define CFG_FLASH_QUIET_TEST	1	/* don't warn upon unknown flash      */
+#define CONFIG_SYS_FLASH_EMPTY_INFO	      /* print 'E' for empty sector on flinfo */
+#define CONFIG_SYS_FLASH_QUIET_TEST	1	/* don't warn upon unknown flash      */
 
-#define CFG_ENV_SECT_SIZE	0x20000	/* size of one complete sector	      */
-#define CFG_ENV_ADDR		(CFG_FLASH1_TOP - CFG_ENV_SECT_SIZE)
-#define CFG_ENV_SIZE		0x2000	/* Total Size of Environment Sector   */
+#define CONFIG_ENV_SECT_SIZE	0x20000	/* size of one complete sector	      */
+#define CONFIG_ENV_ADDR		(CONFIG_SYS_FLASH1_TOP - CONFIG_ENV_SECT_SIZE)
+#define CONFIG_ENV_SIZE		0x2000	/* Total Size of Environment Sector   */
 
 /* Address and size of Redundant Environment Sector */
-#define CFG_ENV_ADDR_REDUND	(CFG_ENV_ADDR - CFG_ENV_SECT_SIZE)
-#define CFG_ENV_SIZE_REDUND	CFG_ENV_SIZE
+#define CONFIG_ENV_ADDR_REDUND	(CONFIG_ENV_ADDR - CONFIG_ENV_SECT_SIZE)
+#define CONFIG_ENV_SIZE_REDUND	CONFIG_ENV_SIZE
 
 /*
  * DDR SDRAM
  */
-#define CFG_MBYTES_SDRAM        (512)	/* 512 MiB	TODO: remove	*/
+#define CONFIG_SYS_MBYTES_SDRAM        (512)	/* 512 MiB	TODO: remove	*/
 #define CONFIG_DDR_DATA_EYE		/* use DDR2 optimization	*/
 #define CONFIG_SPD_EEPROM		/* Use SPD EEPROM for setup	*/
 #define CONFIG_ZERO_SDRAM		/* Zero SDRAM after setup	*/
 #define CONFIG_DDR_ECC			/* Use ECC when available	*/
 #define SPD_EEPROM_ADDRESS	{0x50}
 #define CONFIG_PROG_SDRAM_TLB
-#define CFG_MEM_TOP_HIDE	(4 << 10) /* don't use last 4kbytes	*/
+#define CONFIG_SYS_MEM_TOP_HIDE	(4 << 10) /* don't use last 4kbytes	*/
 					/* 440EPx errata CHIP 11	*/
 
 /*
@@ -153,24 +153,24 @@
  */
 #define CONFIG_HARD_I2C		1	/* I2C with hardware support	*/
 #undef	CONFIG_SOFT_I2C			/* I2C bit-banged		*/
-#define CFG_I2C_SPEED		400000	/* I2C speed and slave address	*/
-#define CFG_I2C_SLAVE		0x7F
+#define CONFIG_SYS_I2C_SPEED		400000	/* I2C speed and slave address	*/
+#define CONFIG_SYS_I2C_SLAVE		0x7F
 
-#define CFG_I2C_MULTI_EEPROMS
-#define CFG_I2C_EEPROM_ADDR	(0xa8>>1)
-#define CFG_I2C_EEPROM_ADDR_LEN 1
-#define CFG_EEPROM_PAGE_WRITE_BITS 3
-#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10
+#define CONFIG_SYS_I2C_MULTI_EEPROMS
+#define CONFIG_SYS_I2C_EEPROM_ADDR	(0xa8>>1)
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10
 
 /* I2C RTC */
 #define CONFIG_RTC_M41T60	1
-#define CFG_I2C_RTC_ADDR	0x68
+#define CONFIG_SYS_I2C_RTC_ADDR	0x68
 
 /* I2C SYSMON (LM73)							*/
 #define CONFIG_DTT_LM73		1	/* National Semi's LM73		*/
 #define CONFIG_DTT_SENSORS	{2}	/* Sensor addresses		*/
-#define CFG_DTT_MAX_TEMP	70
-#define CFG_DTT_MIN_TEMP	-30
+#define CONFIG_SYS_DTT_MAX_TEMP	70
+#define CONFIG_SYS_DTT_MIN_TEMP	-30
 
 #define CONFIG_PREBOOT	"echo;"						\
 	"echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;" \
@@ -180,13 +180,13 @@
 
 /* Setup some board specific values for the default environment variables */
 #define CONFIG_HOSTNAME		korat
-#define CFG_BOOTFILE		"bootfile=/tftpboot/korat/uImage\0"
-#define CFG_ROOTPATH		"rootpath=/opt/eldk/ppc_4xxFP\0"
+#define CONFIG_SYS_BOOTFILE		"bootfile=/tftpboot/korat/uImage\0"
+#define CONFIG_SYS_ROOTPATH		"rootpath=/opt/eldk/ppc_4xxFP\0"
 
 /* Note: kernel_addr and ramdisk_addr assume that FLASH1 is 64 MiB. */
 #define CONFIG_EXTRA_ENV_SETTINGS					\
-	CFG_BOOTFILE							\
-	CFG_ROOTPATH							\
+	CONFIG_SYS_BOOTFILE							\
+	CONFIG_SYS_ROOTPATH							\
 	"netdev=eth0\0"							\
 	"nfsargs=setenv bootargs root=/dev/nfs rw "			\
 		"nfsroot=${serverip}:${rootpath}\0"			\
@@ -213,8 +213,9 @@
 #define CONFIG_BOOTDELAY	5	/* autoboot after 5 seconds	*/
 
 #define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
-#define CFG_LOADS_BAUD_CHANGE	1	/* allow baudrate change	*/
+#define CONFIG_SYS_LOADS_BAUD_CHANGE	1	/* allow baudrate change	*/
 
+#define CONFIG_PPC4xx_EMAC
 #define CONFIG_IBM_EMAC4_V4	1
 #define CONFIG_MII		1	/* MII PHY management		*/
 #define CONFIG_PHY_ADDR		2	/* PHY address, See schematics	*/
@@ -224,7 +225,7 @@
 #define CONFIG_PHY_GIGE		1	/* Include GbE speed/duplex detection */
 
 #define CONFIG_HAS_ETH0
-#define CFG_RX_ETH_BUFFER	32	/* Number of ethernet rx	*/
+#define CONFIG_SYS_RX_ETH_BUFFER	32	/* Number of ethernet rx	*/
 					/*   buffers & descriptors	*/
 #define CONFIG_NET_MULTI	1
 #define CONFIG_HAS_ETH1		1	/* add support for "eth1addr"	*/
@@ -277,47 +278,47 @@
 #define CONFIG_CMD_USB
 
 /* POST support */
-#define CONFIG_POST		(CFG_POST_CACHE	   | \
-				 CFG_POST_CPU	   | \
-				 CFG_POST_ECC	   | \
-				 CFG_POST_ETHER	   | \
-				 CFG_POST_FPU	   | \
-				 CFG_POST_I2C	   | \
-				 CFG_POST_MEMORY   | \
-				 CFG_POST_RTC	   | \
-				 CFG_POST_SPR	   | \
-				 CFG_POST_UART)
-
-#define CFG_POST_WORD_ADDR	(CFG_GBL_DATA_OFFSET - 0x4)
+#define CONFIG_POST		(CONFIG_SYS_POST_CACHE	   | \
+				 CONFIG_SYS_POST_CPU	   | \
+				 CONFIG_SYS_POST_ECC	   | \
+				 CONFIG_SYS_POST_ETHER	   | \
+				 CONFIG_SYS_POST_FPU	   | \
+				 CONFIG_SYS_POST_I2C	   | \
+				 CONFIG_SYS_POST_MEMORY   | \
+				 CONFIG_SYS_POST_RTC	   | \
+				 CONFIG_SYS_POST_SPR	   | \
+				 CONFIG_SYS_POST_UART)
+
+#define CONFIG_SYS_POST_WORD_ADDR	(CONFIG_SYS_GBL_DATA_OFFSET - 0x4)
 #define CONFIG_LOGBUFFER
-#define CFG_POST_CACHE_ADDR	0xC8000000	/* free virtual address     */
+#define CONFIG_SYS_POST_CACHE_ADDR	0xC8000000	/* free virtual address     */
 
-#define CFG_CONSOLE_IS_IN_ENV	/* Otherwise it catches logbuffer as output */
+#define CONFIG_SYS_CONSOLE_IS_IN_ENV	/* Otherwise it catches logbuffer as output */
 
 #define CONFIG_SUPPORT_VFAT
 
 /*
  * Miscellaneous configurable options
  */
-#define CFG_LONGHELP			/* undef to save memory		*/
-#define CFG_PROMPT	        "=> "	/* Monitor Command Prompt	*/
+#define CONFIG_SYS_LONGHELP			/* undef to save memory		*/
+#define CONFIG_SYS_PROMPT	        "=> "	/* Monitor Command Prompt	*/
 #if defined(CONFIG_CMD_KGDB)
-#define CFG_CBSIZE	        1024	/* Console I/O Buffer Size	*/
+#define CONFIG_SYS_CBSIZE	        1024	/* Console I/O Buffer Size	*/
 #else
-#define CFG_CBSIZE	        256	/* Console I/O Buffer Size	*/
+#define CONFIG_SYS_CBSIZE	        256	/* Console I/O Buffer Size	*/
 #endif
-#define CFG_PBSIZE              (CFG_CBSIZE+sizeof(CFG_PROMPT)+16)
+#define CONFIG_SYS_PBSIZE              (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
 					/* Print Buffer Size		*/
-#define CFG_MAXARGS	        16	/* max number of command args	*/
-#define CFG_BARGSIZE	        CFG_CBSIZE /* Boot Argument Buffer Size	*/
+#define CONFIG_SYS_MAXARGS	        16	/* max number of command args	*/
+#define CONFIG_SYS_BARGSIZE	        CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size	*/
 
-#define CFG_MEMTEST_START	0x0400000 /* memtest works on		*/
-#define CFG_MEMTEST_END		0x0C00000 /* 4 ... 12 MB in DRAM	*/
+#define CONFIG_SYS_MEMTEST_START	0x0400000 /* memtest works on		*/
+#define CONFIG_SYS_MEMTEST_END		0x0C00000 /* 4 ... 12 MB in DRAM	*/
 
-#define CFG_LOAD_ADDR		0x100000  /* default load address	*/
-#define CFG_EXTBDINFO		1  /* To use extended board_into (bd_t)	*/
+#define CONFIG_SYS_LOAD_ADDR		0x100000  /* default load address	*/
+#define CONFIG_SYS_EXTBDINFO		1  /* To use extended board_into (bd_t)	*/
 
-#define CFG_HZ		        1000	/* decrementer freq: 1 ms ticks	*/
+#define CONFIG_SYS_HZ		        1000	/* decrementer freq: 1 ms ticks	*/
 
 #define CONFIG_CMDLINE_EDITING	1	/* add command line history	*/
 #define CONFIG_LOOPW		1	/* enable loopw command		*/
@@ -328,7 +329,7 @@
 /*
  * Korat-specific options
  */
-#define CFG_KORAT_MAN_RESET_MS	10000	/* timeout for manufacturer reset */
+#define CONFIG_SYS_KORAT_MAN_RESET_MS	10000	/* timeout for manufacturer reset */
 
 /*
  * PCI stuff
@@ -336,50 +337,50 @@
 /* General PCI */
 #define CONFIG_PCI			/* include pci support		*/
 #define CONFIG_PCI_PNP			/* do pci plug-and-play		*/
-#define CFG_PCI_CACHE_LINE_SIZE	0	/* to avoid problems with PNP	*/
+#define CONFIG_SYS_PCI_CACHE_LINE_SIZE	0	/* to avoid problems with PNP	*/
 #define CONFIG_PCI_SCAN_SHOW		/* show pci devices on startup	*/
-#define CFG_PCI_TARGBASE	0x80000000	/* PCIaddr mapped to	*/
-						/*   CFG_PCI_MEMBASE	*/
+#define CONFIG_SYS_PCI_TARGBASE	0x80000000	/* PCIaddr mapped to	*/
+						/*   CONFIG_SYS_PCI_MEMBASE	*/
 /* Board-specific PCI */
-#define CFG_PCI_TARGET_INIT
-#define CFG_PCI_MASTER_INIT
+#define CONFIG_SYS_PCI_TARGET_INIT
+#define CONFIG_SYS_PCI_MASTER_INIT
 
-#define CFG_PCI_SUBSYS_VENDORID 0x10e8	/* AMCC				*/
-#define CFG_PCI_SUBSYS_ID       0xcafe	/* Whatever			*/
+#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x10e8	/* AMCC				*/
+#define CONFIG_SYS_PCI_SUBSYS_ID       0xcafe	/* Whatever			*/
 
 /*
  * For booting Linux, the board info and command line data have to be in the
  * first 8 MB of memory, since this is the maximum mapped by the Linux kernel
  * during initialization.
  */
-#define CFG_BOOTMAPSZ		(8 << 20) /* Initial Memory map for Linux */
+#define CONFIG_SYS_BOOTMAPSZ		(8 << 20) /* Initial Memory map for Linux */
 
 /*
  * External Bus Controller (EBC) Setup
  */
 
 /* Memory Bank 0 (NOR-FLASH) initialization				*/
-#if CFG_FLASH0_SIZE == 0x01000000
-#define CFG_EBC_PB0AP		0x04017300
-#define CFG_EBC_PB0CR		(CFG_FLASH0_ADDR | 0x0009A000)
-#elif CFG_FLASH0_SIZE == 0x04000000
-#define CFG_EBC_PB0AP		0x04017300
-#define CFG_EBC_PB0CR		(CFG_FLASH0_ADDR | 0x000DA000)
+#if CONFIG_SYS_FLASH0_SIZE == 0x01000000
+#define CONFIG_SYS_EBC_PB0AP		0x04017300
+#define CONFIG_SYS_EBC_PB0CR		(CONFIG_SYS_FLASH0_ADDR | 0x0009A000)
+#elif CONFIG_SYS_FLASH0_SIZE == 0x04000000
+#define CONFIG_SYS_EBC_PB0AP		0x04017300
+#define CONFIG_SYS_EBC_PB0CR		(CONFIG_SYS_FLASH0_ADDR | 0x000DA000)
 #else
-#error Unable to configure chip select for current CFG_FLASH0_SIZE
+#error Unable to configure chip select for current CONFIG_SYS_FLASH0_SIZE
 #endif
 
 /* Memory Bank 1 (NOR-FLASH) initialization				*/
-#if CFG_FLASH1_MAX_SIZE == 0x08000000
-#define CFG_EBC_PB1AP		0x04017300
-#define CFG_EBC_PB1CR		(CFG_FLASH1_ADDR | 0x000FA000)
+#if CONFIG_SYS_FLASH1_MAX_SIZE == 0x08000000
+#define CONFIG_SYS_EBC_PB1AP		0x04017300
+#define CONFIG_SYS_EBC_PB1CR		(CONFIG_SYS_FLASH1_ADDR | 0x000FA000)
 #else
-#error Unable to configure chip select for current CFG_FLASH1_MAX_SIZE
+#error Unable to configure chip select for current CONFIG_SYS_FLASH1_MAX_SIZE
 #endif
 
 /* Memory Bank 2 (CPLD) initialization					*/
-#define CFG_EBC_PB2AP		0x04017300
-#define CFG_EBC_PB2CR		(CFG_CPLD_BASE | 0x00038000)
+#define CONFIG_SYS_EBC_PB2AP		0x04017300
+#define CONFIG_SYS_EBC_PB2CR		(CONFIG_SYS_CPLD_BASE | 0x00038000)
 
 /*
  * GPIO Setup
@@ -446,22 +447,22 @@
  * GPIO63  xxxx   x    x   (reserved for trace port)
  */
 
-#define CFG_GPIO_ATMEGA_RESET_	12
-#define CFG_GPIO_ATMEGA_SS_	13
-#define CFG_GPIO_PHY0_FIBER_SEL	27
-#define CFG_GPIO_PHY1_FIBER_SEL	28
-#define CFG_GPIO_SFP0_PRESENT_	30
-#define CFG_GPIO_SFP1_PRESENT_	31
-#define CFG_GPIO_SFP0_TX_EN_	32
-#define CFG_GPIO_SFP1_TX_EN_	33
-#define CFG_GPIO_PHY0_EN	45
-#define CFG_GPIO_PHY1_EN	46
-#define CFG_GPIO_RESET_PRESSED_	47
+#define CONFIG_SYS_GPIO_ATMEGA_RESET_	12
+#define CONFIG_SYS_GPIO_ATMEGA_SS_	13
+#define CONFIG_SYS_GPIO_PHY0_FIBER_SEL	27
+#define CONFIG_SYS_GPIO_PHY1_FIBER_SEL	28
+#define CONFIG_SYS_GPIO_SFP0_PRESENT_	30
+#define CONFIG_SYS_GPIO_SFP1_PRESENT_	31
+#define CONFIG_SYS_GPIO_SFP0_TX_EN_	32
+#define CONFIG_SYS_GPIO_SFP1_TX_EN_	33
+#define CONFIG_SYS_GPIO_PHY0_EN	45
+#define CONFIG_SYS_GPIO_PHY1_EN	46
+#define CONFIG_SYS_GPIO_RESET_PRESSED_	47
 
 /*
  * PPC440 GPIO Configuration
  */
-#define CFG_4xx_GPIO_TABLE { /*	  Out		  GPIO	Alternate1	Alternate2	Alternate3 */ \
+#define CONFIG_SYS_4xx_GPIO_TABLE { /*	  Out		  GPIO	Alternate1	Alternate2	Alternate3 */ \
 {											\
 /* GPIO Core 0 */									\
 {GPIO0_BASE, GPIO_BI , GPIO_ALT1, GPIO_OUT_0}, /* GPIO0	EBC_ADDR(7)	DMA_REQ(2)	*/	\
diff --git a/include/configs/kvme080.h b/include/configs/kvme080.h
index 819e456e4..0d95263da 100644
--- a/include/configs/kvme080.h
+++ b/include/configs/kvme080.h
@@ -56,7 +56,7 @@
 #define CONFIG_MISC_INIT_R
 
 #define CONFIG_LOADS_ECHO	1
-#undef	CFG_LOADS_BAUD_CHANGE
+#undef	CONFIG_SYS_LOADS_BAUD_CHANGE
 
 #undef	CONFIG_WATCHDOG
 
@@ -99,75 +99,75 @@
 
 #define CONFIG_NETCONSOLE
 
-#define CFG_LONGHELP
-#define CFG_PROMPT		"=> "
-#define CFG_CBSIZE		256
-#define CFG_PBSIZE		(CFG_CBSIZE+sizeof(CFG_PROMPT)+16)
-#define CFG_MAXARGS		16
-#define CFG_BARGSIZE		CFG_CBSIZE
+#define CONFIG_SYS_LONGHELP
+#define CONFIG_SYS_PROMPT		"=> "
+#define CONFIG_SYS_CBSIZE		256
+#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
+#define CONFIG_SYS_MAXARGS		16
+#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE
 
-#define CFG_MEMTEST_START	0x00400000
-#define CFG_MEMTEST_END		0x07C00000
+#define CONFIG_SYS_MEMTEST_START	0x00400000
+#define CONFIG_SYS_MEMTEST_END		0x07C00000
 
-#define CFG_LOAD_ADDR		0x00100000
-#define CFG_HZ			1000
+#define CONFIG_SYS_LOAD_ADDR		0x00100000
+#define CONFIG_SYS_HZ			1000
 
-#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
 
-#define CFG_INIT_RAM_ADDR	0x40000000
-#define CFG_INIT_RAM_END	0x1000
-#define CFG_GBL_DATA_SIZE	128
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_RAM_ADDR	0x40000000
+#define CONFIG_SYS_INIT_RAM_END	0x1000
+#define CONFIG_SYS_GBL_DATA_SIZE	128
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
 
-#define CFG_SDRAM_BASE		0x00000000
-#define CFG_FLASH_BASE		0x7C000000
-#define CFG_EUMB_ADDR		0xFC000000
-#define CFG_NVRAM_BASE_ADDR	0xFF000000
-#define CFG_NS16550_COM1	0xFF080000
-#define CFG_NS16550_COM2	0xFF080010
-#define CFG_NS16550_COM3	0xFF080020
-#define CFG_NS16550_COM4	0xFF080030
-#define CFG_RESET_ADDRESS	0xFFF00100
+#define CONFIG_SYS_SDRAM_BASE		0x00000000
+#define CONFIG_SYS_FLASH_BASE		0x7C000000
+#define CONFIG_SYS_EUMB_ADDR		0xFC000000
+#define CONFIG_SYS_NVRAM_BASE_ADDR	0xFF000000
+#define CONFIG_SYS_NS16550_COM1	0xFF080000
+#define CONFIG_SYS_NS16550_COM2	0xFF080010
+#define CONFIG_SYS_NS16550_COM3	0xFF080020
+#define CONFIG_SYS_NS16550_COM4	0xFF080030
+#define CONFIG_SYS_RESET_ADDRESS	0xFFF00100
 
-#define CFG_MAX_RAM_SIZE	0x20000000
-#define CFG_FLASH_SIZE		(16 * 1024 * 1024)
-#define CFG_NVRAM_SIZE		0x7FFF8
+#define CONFIG_SYS_MAX_RAM_SIZE	0x20000000
+#define CONFIG_SYS_FLASH_SIZE		(16 * 1024 * 1024)
+#define CONFIG_SYS_NVRAM_SIZE		0x7FFF8
 
 #define CONFIG_VERY_BIG_RAM
 
-#define CFG_MONITOR_LEN		0x00040000
-#define CFG_MONITOR_BASE	TEXT_BASE
-#define CFG_MALLOC_LEN		(512 << 10)
+#define CONFIG_SYS_MONITOR_LEN		0x00040000
+#define CONFIG_SYS_MONITOR_BASE	TEXT_BASE
+#define CONFIG_SYS_MALLOC_LEN		(512 << 10)
 
-#define CFG_BOOTMAPSZ		(8 << 20)
+#define CONFIG_SYS_BOOTMAPSZ		(8 << 20)
 
-#define CFG_FLASH_CFI
+#define CONFIG_SYS_FLASH_CFI
 #define CONFIG_FLASH_CFI_DRIVER
-#define CFG_FLASH_USE_BUFFER_WRITE
-#define CFG_FLASH_PROTECTION
-#define CFG_FLASH_EMPTY_INFO
-#define CFG_FLASH_PROTECT_CLEAR
+#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
+#define CONFIG_SYS_FLASH_PROTECTION
+#define CONFIG_SYS_FLASH_EMPTY_INFO
+#define CONFIG_SYS_FLASH_PROTECT_CLEAR
 
-#define CFG_MAX_FLASH_BANKS	1
-#define CFG_MAX_FLASH_SECT	256
+#define CONFIG_SYS_MAX_FLASH_BANKS	1
+#define CONFIG_SYS_MAX_FLASH_SECT	256
 
-#define CFG_FLASH_ERASE_TOUT	120000
-#define CFG_FLASH_WRITE_TOUT	500
+#define CONFIG_SYS_FLASH_ERASE_TOUT	120000
+#define CONFIG_SYS_FLASH_WRITE_TOUT	500
 
-#define CFG_JFFS2_FIRST_BANK	0
-#define CFG_JFFS2_NUM_BANKS	1
+#define CONFIG_SYS_JFFS2_FIRST_BANK	0
+#define CONFIG_SYS_JFFS2_NUM_BANKS	1
 
-#define CFG_ENV_IS_IN_NVRAM	1
+#define CONFIG_ENV_IS_IN_NVRAM	1
 #define CONFIG_ENV_OVERWRITE	1
-#define CFG_NVRAM_ACCESS_ROUTINE
-#define CFG_ENV_ADDR		CFG_NVRAM_BASE_ADDR
-#define CFG_ENV_SIZE		0x400
-#define CFG_ENV_OFFSET		0
+#define CONFIG_SYS_NVRAM_ACCESS_ROUTINE
+#define CONFIG_ENV_ADDR		CONFIG_SYS_NVRAM_BASE_ADDR
+#define CONFIG_ENV_SIZE		0x400
+#define CONFIG_ENV_OFFSET		0
 
-#define CFG_NS16550
-#define CFG_NS16550_SERIAL
-#define CFG_NS16550_REG_SIZE	1
-#define CFG_NS16550_CLK		14745600
+#define CONFIG_SYS_NS16550
+#define CONFIG_SYS_NS16550_SERIAL
+#define CONFIG_SYS_NS16550_REG_SIZE	1
+#define CONFIG_SYS_NS16550_CLK		14745600
 
 #define CONFIG_PCI
 #define CONFIG_PCI_PNP
@@ -176,97 +176,97 @@
 #define CONFIG_EEPRO100
 #define CONFIG_EEPRO100_SROM_WRITE
 
-#define CFG_RX_ETH_BUFFER	8
+#define CONFIG_SYS_RX_ETH_BUFFER	8
 
 #define CONFIG_HARD_I2C		1
-#define CFG_I2C_SPEED		400000
-#define CFG_I2C_SLAVE		0x7F
+#define CONFIG_SYS_I2C_SPEED		400000
+#define CONFIG_SYS_I2C_SLAVE		0x7F
 
-#define CFG_I2C_EEPROM_ADDR		0x57
-#define CFG_I2C_EEPROM_ADDR_LEN		1
-#define CFG_EEPROM_PAGE_WRITE_BITS	3
-#define CFG_EEPROM_PAGE_WRITE_DELAY_MS	10
+#define CONFIG_SYS_I2C_EEPROM_ADDR		0x57
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN		1
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS	3
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	10
 
 #define CONFIG_SYS_CLK_FREQ	33333333
 
-#define CFG_CACHELINE_SIZE	32
+#define CONFIG_SYS_CACHELINE_SIZE	32
 #if defined(CONFIG_CMD_KGDB)
-#  define CFG_CACHELINE_SHIFT	5
+#  define CONFIG_SYS_CACHELINE_SHIFT	5
 #endif
 
-#define CFG_DLL_EXTEND		0x00
-#define CFG_PCI_HOLD_DEL	0x20
-
-#define CFG_ROMNAL		15
-#define CFG_ROMFAL		31
-
-#define CFG_REFINT		430
-
-#define CFG_DBUS_SIZE2		1
-
-#define CFG_BSTOPRE		121
-#define CFG_REFREC		8
-#define CFG_RDLAT		4
-#define CFG_PRETOACT		3
-#define CFG_ACTTOPRE		5
-#define CFG_ACTORW		3
-#define CFG_SDMODE_CAS_LAT	3
-#define CFG_SDMODE_WRAP		0
-
-#define CFG_REGISTERD_TYPE_BUFFER	1
-#define CFG_EXTROM			1
-#define CFG_REGDIMM			0
-
-#define CFG_BANK0_START		0x00000000
-#define CFG_BANK0_END		(0x4000000 - 1)
-#define CFG_BANK0_ENABLE	1
-#define CFG_BANK1_START		0x04000000
-#define CFG_BANK1_END		(0x8000000 - 1)
-#define CFG_BANK1_ENABLE	1
-#define CFG_BANK2_START		0x3ff00000
-#define CFG_BANK2_END		0x3fffffff
-#define CFG_BANK2_ENABLE	0
-#define CFG_BANK3_START		0x3ff00000
-#define CFG_BANK3_END		0x3fffffff
-#define CFG_BANK3_ENABLE	0
-#define CFG_BANK4_START		0x00000000
-#define CFG_BANK4_END		0x00000000
-#define CFG_BANK4_ENABLE	0
-#define CFG_BANK5_START		0x00000000
-#define CFG_BANK5_END		0x00000000
-#define CFG_BANK5_ENABLE	0
-#define CFG_BANK6_START		0x00000000
-#define CFG_BANK6_END		0x00000000
-#define CFG_BANK6_ENABLE	0
-#define CFG_BANK7_START		0x00000000
-#define CFG_BANK7_END		0x00000000
-#define CFG_BANK7_ENABLE	0
-
-#define CFG_BANK_ENABLE		0x03
-
-#define CFG_ODCR		0x75
-#define CFG_PGMAX		0x32
-
-#define CFG_IBAT0L	(CFG_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
-#define CFG_IBAT0U	(CFG_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
-
-#define CFG_IBAT1L	(CFG_INIT_RAM_ADDR | BATL_PP_10 | BATL_MEMCOHERENCE)
-#define CFG_IBAT1U	(CFG_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP)
-
-#define CFG_IBAT2L	(0x80000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
-#define CFG_IBAT2U	(0x80000000 | BATU_BL_256M | BATU_VS | BATU_VP)
-
-#define CFG_IBAT3L	(0xF0000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
-#define CFG_IBAT3U	(0xF0000000 | BATU_BL_256M | BATU_VS | BATU_VP)
-
-#define CFG_DBAT0L	CFG_IBAT0L
-#define CFG_DBAT0U	CFG_IBAT0U
-#define CFG_DBAT1L	CFG_IBAT1L
-#define CFG_DBAT1U	CFG_IBAT1U
-#define CFG_DBAT2L	CFG_IBAT2L
-#define CFG_DBAT2U	CFG_IBAT2U
-#define CFG_DBAT3L	CFG_IBAT3L
-#define CFG_DBAT3U	CFG_IBAT3U
+#define CONFIG_SYS_DLL_EXTEND		0x00
+#define CONFIG_SYS_PCI_HOLD_DEL	0x20
+
+#define CONFIG_SYS_ROMNAL		15
+#define CONFIG_SYS_ROMFAL		31
+
+#define CONFIG_SYS_REFINT		430
+
+#define CONFIG_SYS_DBUS_SIZE2		1
+
+#define CONFIG_SYS_BSTOPRE		121
+#define CONFIG_SYS_REFREC		8
+#define CONFIG_SYS_RDLAT		4
+#define CONFIG_SYS_PRETOACT		3
+#define CONFIG_SYS_ACTTOPRE		5
+#define CONFIG_SYS_ACTORW		3
+#define CONFIG_SYS_SDMODE_CAS_LAT	3
+#define CONFIG_SYS_SDMODE_WRAP		0
+
+#define CONFIG_SYS_REGISTERD_TYPE_BUFFER	1
+#define CONFIG_SYS_EXTROM			1
+#define CONFIG_SYS_REGDIMM			0
+
+#define CONFIG_SYS_BANK0_START		0x00000000
+#define CONFIG_SYS_BANK0_END		(0x4000000 - 1)
+#define CONFIG_SYS_BANK0_ENABLE	1
+#define CONFIG_SYS_BANK1_START		0x04000000
+#define CONFIG_SYS_BANK1_END		(0x8000000 - 1)
+#define CONFIG_SYS_BANK1_ENABLE	1
+#define CONFIG_SYS_BANK2_START		0x3ff00000
+#define CONFIG_SYS_BANK2_END		0x3fffffff
+#define CONFIG_SYS_BANK2_ENABLE	0
+#define CONFIG_SYS_BANK3_START		0x3ff00000
+#define CONFIG_SYS_BANK3_END		0x3fffffff
+#define CONFIG_SYS_BANK3_ENABLE	0
+#define CONFIG_SYS_BANK4_START		0x00000000
+#define CONFIG_SYS_BANK4_END		0x00000000
+#define CONFIG_SYS_BANK4_ENABLE	0
+#define CONFIG_SYS_BANK5_START		0x00000000
+#define CONFIG_SYS_BANK5_END		0x00000000
+#define CONFIG_SYS_BANK5_ENABLE	0
+#define CONFIG_SYS_BANK6_START		0x00000000
+#define CONFIG_SYS_BANK6_END		0x00000000
+#define CONFIG_SYS_BANK6_ENABLE	0
+#define CONFIG_SYS_BANK7_START		0x00000000
+#define CONFIG_SYS_BANK7_END		0x00000000
+#define CONFIG_SYS_BANK7_ENABLE	0
+
+#define CONFIG_SYS_BANK_ENABLE		0x03
+
+#define CONFIG_SYS_ODCR		0x75
+#define CONFIG_SYS_PGMAX		0x32
+
+#define CONFIG_SYS_IBAT0L	(CONFIG_SYS_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
+#define CONFIG_SYS_IBAT0U	(CONFIG_SYS_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
+
+#define CONFIG_SYS_IBAT1L	(CONFIG_SYS_INIT_RAM_ADDR | BATL_PP_10 | BATL_MEMCOHERENCE)
+#define CONFIG_SYS_IBAT1U	(CONFIG_SYS_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP)
+
+#define CONFIG_SYS_IBAT2L	(0x80000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
+#define CONFIG_SYS_IBAT2U	(0x80000000 | BATU_BL_256M | BATU_VS | BATU_VP)
+
+#define CONFIG_SYS_IBAT3L	(0xF0000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
+#define CONFIG_SYS_IBAT3U	(0xF0000000 | BATU_BL_256M | BATU_VS | BATU_VP)
+
+#define CONFIG_SYS_DBAT0L	CONFIG_SYS_IBAT0L
+#define CONFIG_SYS_DBAT0U	CONFIG_SYS_IBAT0U
+#define CONFIG_SYS_DBAT1L	CONFIG_SYS_IBAT1L
+#define CONFIG_SYS_DBAT1U	CONFIG_SYS_IBAT1U
+#define CONFIG_SYS_DBAT2L	CONFIG_SYS_IBAT2L
+#define CONFIG_SYS_DBAT2U	CONFIG_SYS_IBAT2U
+#define CONFIG_SYS_DBAT3L	CONFIG_SYS_IBAT3L
+#define CONFIG_SYS_DBAT3U	CONFIG_SYS_IBAT3U
 
 #define BOOTFLAG_COLD	0x01
 #define BOOTFLAG_WARM	0x02
diff --git a/include/configs/lart.h b/include/configs/lart.h
index 4570398cd..38b8e75f4 100644
--- a/include/configs/lart.h
+++ b/include/configs/lart.h
@@ -39,8 +39,8 @@
 /*
  * Size of malloc() pool
  */
-#define CFG_MALLOC_LEN		(CFG_ENV_SIZE + 128*1024)
-#define CFG_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
+#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + 128*1024)
+#define CONFIG_SYS_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
 
 /*
  * Hardware drivers
@@ -92,25 +92,25 @@
 /*
  * Miscellaneous configurable options
  */
-#define	CFG_LONGHELP				/* undef to save memory		*/
-#define	CFG_PROMPT		"LART # "	/* Monitor Command Prompt	*/
-#define	CFG_CBSIZE		256		/* Console I/O Buffer Size	*/
-#define	CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define	CFG_MAXARGS		16		/* max number of command args	*/
-#define CFG_BARGSIZE		CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+#define	CONFIG_SYS_LONGHELP				/* undef to save memory		*/
+#define	CONFIG_SYS_PROMPT		"LART # "	/* Monitor Command Prompt	*/
+#define	CONFIG_SYS_CBSIZE		256		/* Console I/O Buffer Size	*/
+#define	CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define	CONFIG_SYS_MAXARGS		16		/* max number of command args	*/
+#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
 
-#define CFG_MEMTEST_START	0xc0400000	/* memtest works on	*/
-#define CFG_MEMTEST_END		0xc0800000	/* 4 ... 8 MB in DRAM	*/
+#define CONFIG_SYS_MEMTEST_START	0xc0400000	/* memtest works on	*/
+#define CONFIG_SYS_MEMTEST_END		0xc0800000	/* 4 ... 8 MB in DRAM	*/
 
-#undef  CFG_CLKS_IN_HZ		/* everything, incl board info, in Hz */
+#undef  CONFIG_SYS_CLKS_IN_HZ		/* everything, incl board info, in Hz */
 
-#define	CFG_LOAD_ADDR		0xc8000000	/* default load address	*/
+#define	CONFIG_SYS_LOAD_ADDR		0xc8000000	/* default load address	*/
 
-#define	CFG_HZ			3686400		/* incrementer freq: 3.6864 MHz */
-#define CFG_CPUSPEED		0x0b		/* set core clock to 220 MHz */
+#define	CONFIG_SYS_HZ			3686400		/* incrementer freq: 3.6864 MHz */
+#define CONFIG_SYS_CPUSPEED		0x0b		/* set core clock to 220 MHz */
 
 						/* valid baudrates */
-#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
 
 /*-----------------------------------------------------------------------
  * Stack sizes
@@ -140,20 +140,20 @@
 #define PHYS_FLASH_1		0x00000000 /* Flash Bank #1 */
 #define PHYS_FLASH_SIZE		0x00400000 /* 4 MB */
 
-#define CFG_FLASH_BASE		PHYS_FLASH_1
+#define CONFIG_SYS_FLASH_BASE		PHYS_FLASH_1
 
 /*-----------------------------------------------------------------------
  * FLASH and environment organization
  */
-#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
-#define CFG_MAX_FLASH_SECT	(31+8)	/* max number of sectors on one chip	*/
+#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
+#define CONFIG_SYS_MAX_FLASH_SECT	(31+8)	/* max number of sectors on one chip	*/
 
 /* timeout values are in ticks */
-#define CFG_FLASH_ERASE_TOUT	(2*CFG_HZ) /* Timeout for Flash Erase */
-#define CFG_FLASH_WRITE_TOUT	(2*CFG_HZ) /* Timeout for Flash Write */
+#define CONFIG_SYS_FLASH_ERASE_TOUT	(2*CONFIG_SYS_HZ) /* Timeout for Flash Erase */
+#define CONFIG_SYS_FLASH_WRITE_TOUT	(2*CONFIG_SYS_HZ) /* Timeout for Flash Write */
 
-#define	CFG_ENV_IS_IN_FLASH	1
-#define CFG_ENV_ADDR		(PHYS_FLASH_1 + 0x1C000)	/* Addr of Environment Sector	*/
-#define CFG_ENV_SIZE		0x4000	/* Total Size of Environment Sector	*/
+#define	CONFIG_ENV_IS_IN_FLASH	1
+#define CONFIG_ENV_ADDR		(PHYS_FLASH_1 + 0x1C000)	/* Addr of Environment Sector	*/
+#define CONFIG_ENV_SIZE		0x4000	/* Total Size of Environment Sector	*/
 
 #endif	/* __CONFIG_H */
diff --git a/include/configs/linkstation.h b/include/configs/linkstation.h
index e5a0fb971..2feb3ae31 100644
--- a/include/configs/linkstation.h
+++ b/include/configs/linkstation.h
@@ -106,20 +106,20 @@
 /*
  * Miscellaneous configurable options
  */
-#define CFG_LONGHELP				/* undef to save memory		*/
-#define CFG_PROMPT		"=> "		/* Monitor Command Prompt	*/
-#define CFG_CBSIZE		256		/* Console I/O Buffer Size	*/
+#define CONFIG_SYS_LONGHELP				/* undef to save memory		*/
+#define CONFIG_SYS_PROMPT		"=> "		/* Monitor Command Prompt	*/
+#define CONFIG_SYS_CBSIZE		256		/* Console I/O Buffer Size	*/
 
-#define CFG_PBSIZE		(CFG_CBSIZE + sizeof(CFG_PROMPT) + 16)
-#define CFG_MAXARGS		16		/* Max number of command args	*/
-#define CFG_BARGSIZE		CFG_CBSIZE	/* Boot Argument Buffer Size	*/
-#define CFG_LOAD_ADDR		0x00800000	/* Default load address: 8 MB	*/
+#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
+#define CONFIG_SYS_MAXARGS		16		/* Max number of command args	*/
+#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
+#define CONFIG_SYS_LOAD_ADDR		0x00800000	/* Default load address: 8 MB	*/
 
 #define CONFIG_BOOTCOMMAND	"run bootcmd1"
 #define CONFIG_BOOTARGS		"root=/dev/sda1 console=ttyS1,57600 netconsole=@192.168.1.7/eth0,@192.168.1.1/00:50:BF:A4:59:71 rtc-rs5c372.probe=0,0x32 debug"
 #define CONFIG_NFSBOOTCOMMAND	"bootp;run nfsargs;bootm"
 
-#define CFG_CONSOLE_IS_IN_ENV
+#define CONFIG_SYS_CONSOLE_IS_IN_ENV
 
 #define XMK_STR(x)		#x
 #define MK_STR(x)		XMK_STR(x)
@@ -213,30 +213,30 @@
 /*-----------------------------------------------------------------------
  * Start addresses for the final memory configuration
  * (Set up by the startup code)
- * Please note that CFG_SDRAM_BASE _must_ start at 0
+ * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
  */
-#define CFG_SDRAM_BASE		0x00000000
+#define CONFIG_SYS_SDRAM_BASE		0x00000000
 
-#define CFG_FLASH_BASE		0xFFC00000
-#define CFG_FLASH_SIZE		0x00400000
-#define CFG_MONITOR_BASE	TEXT_BASE
+#define CONFIG_SYS_FLASH_BASE		0xFFC00000
+#define CONFIG_SYS_FLASH_SIZE		0x00400000
+#define CONFIG_SYS_MONITOR_BASE	TEXT_BASE
 
-#define CFG_RESET_ADDRESS	0xFFF00100
-#define CFG_EUMB_ADDR		0x80000000
-#define CFG_PCI_MEM_ADDR	0xB0000000
-#define CFG_MISC_REGION_ADDR	0xFE000000
+#define CONFIG_SYS_RESET_ADDRESS	0xFFF00100
+#define CONFIG_SYS_EUMB_ADDR		0x80000000
+#define CONFIG_SYS_PCI_MEM_ADDR	0xB0000000
+#define CONFIG_SYS_MISC_REGION_ADDR	0xFE000000
 
-#define CFG_MONITOR_LEN		0x00040000	/* 256 kB			*/
-#define CFG_MALLOC_LEN		(512 << 10)	/* Reserve some kB for malloc()	*/
+#define CONFIG_SYS_MONITOR_LEN		0x00040000	/* 256 kB			*/
+#define CONFIG_SYS_MALLOC_LEN		(512 << 10)	/* Reserve some kB for malloc()	*/
 
-#define CFG_MEMTEST_START	0x00100000	/* memtest works on		*/
-#define CFG_MEMTEST_END		0x00800000	/* 1M ... 8M in DRAM		*/
+#define CONFIG_SYS_MEMTEST_START	0x00100000	/* memtest works on		*/
+#define CONFIG_SYS_MEMTEST_END		0x00800000	/* 1M ... 8M in DRAM		*/
 
 /* Maximum amount of RAM */
 #if defined(CONFIG_HLAN) || defined(CONFIG_LAN)
-#define CFG_MAX_RAM_SIZE	0x04000000	/* 64MB of SDRAM  */
+#define CONFIG_SYS_MAX_RAM_SIZE	0x04000000	/* 64MB of SDRAM  */
 #elif defined(CONFIG_HGLAN) || defined(CONFIG_HTGL)
-#define CFG_MAX_RAM_SIZE	0x08000000	/* 128MB of SDRAM */
+#define CONFIG_SYS_MAX_RAM_SIZE	0x08000000	/* 128MB of SDRAM */
 #else
 #error Unknown LinkStation type
 #endif
@@ -249,38 +249,38 @@
  *
  * Always do "make clean" after changing the build type
  */
-#if CFG_MONITOR_BASE < CFG_FLASH_BASE
-#define CFG_RAMBOOT
+#if CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE
+#define CONFIG_SYS_RAMBOOT
 #endif
 
 /*-----------------------------------------------------------------------
  * Definitions for initial stack pointer and data area
  */
 #if 1 /* RAM is available when the first C function is called */
-#define CFG_INIT_RAM_ADDR	(CFG_SDRAM_BASE + CFG_MAX_RAM_SIZE - 0x1000)
+#define CONFIG_SYS_INIT_RAM_ADDR	(CONFIG_SYS_SDRAM_BASE + CONFIG_SYS_MAX_RAM_SIZE - 0x1000)
 #else
-#define CFG_INIT_RAM_ADDR	0x40000000
+#define CONFIG_SYS_INIT_RAM_ADDR	0x40000000
 #endif
-#define CFG_INIT_RAM_END	0x1000
-#define CFG_GBL_DATA_SIZE	128
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_RAM_END	0x1000
+#define CONFIG_SYS_GBL_DATA_SIZE	128
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
 
 /*----------------------------------------------------------------------
  * Serial configuration
  */
 #define CONFIG_CONS_INDEX	1
 #define CONFIG_BAUDRATE		57600
-#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
 
-#define CFG_NS16550
-#define CFG_NS16550_SERIAL
+#define CONFIG_SYS_NS16550
+#define CONFIG_SYS_NS16550_SERIAL
 
-#define CFG_NS16550_REG_SIZE	1
+#define CONFIG_SYS_NS16550_REG_SIZE	1
 
-#define CFG_NS16550_CLK		get_bus_freq(0)
+#define CONFIG_SYS_NS16550_CLK		get_bus_freq(0)
 
-#define CFG_NS16550_COM1	(CFG_EUMB_ADDR + 0x4600)	/* Console port	*/
-#define CFG_NS16550_COM2	(CFG_EUMB_ADDR + 0x4500)	/* AVR port	*/
+#define CONFIG_SYS_NS16550_COM1	(CONFIG_SYS_EUMB_ADDR + 0x4600)	/* Console port	*/
+#define CONFIG_SYS_NS16550_COM2	(CONFIG_SYS_EUMB_ADDR + 0x4500)	/* AVR port	*/
 
 /*
  * Low Level Configuration Settings
@@ -300,54 +300,54 @@
 /* FIXME: 32.768 MHz is the crystal frequency but */
 /* the real frequency is lower by about 0.75%     */
 #define CONFIG_SYS_CLK_FREQ	32768000
-#define CFG_HZ			1000
+#define CONFIG_SYS_HZ			1000
 
 /* Bit-field values for MCCR1.  */
-#define CFG_ROMNAL      0
-#define CFG_ROMFAL      11
-
-#define CFG_BANK0_ROW	2       /* Only bank 0 used: 13 x n x 4 */
-#define CFG_BANK1_ROW	0
-#define CFG_BANK2_ROW	0
-#define CFG_BANK3_ROW	0
-#define CFG_BANK4_ROW	0
-#define CFG_BANK5_ROW	0
-#define CFG_BANK6_ROW	0
-#define CFG_BANK7_ROW	0
+#define CONFIG_SYS_ROMNAL      0
+#define CONFIG_SYS_ROMFAL      11
+
+#define CONFIG_SYS_BANK0_ROW	2       /* Only bank 0 used: 13 x n x 4 */
+#define CONFIG_SYS_BANK1_ROW	0
+#define CONFIG_SYS_BANK2_ROW	0
+#define CONFIG_SYS_BANK3_ROW	0
+#define CONFIG_SYS_BANK4_ROW	0
+#define CONFIG_SYS_BANK5_ROW	0
+#define CONFIG_SYS_BANK6_ROW	0
+#define CONFIG_SYS_BANK7_ROW	0
 
 /* Bit-field values for MCCR2.  */
-#define CFG_TSWAIT      0
+#define CONFIG_SYS_TSWAIT      0
 #if defined(CONFIG_LAN) || defined(CONFIG_HLAN)
-#define CFG_REFINT      0x15e0
+#define CONFIG_SYS_REFINT      0x15e0
 #elif defined(CONFIG_HGLAN) || defined(CONFIG_HTGL)
-#define CFG_REFINT      0x1580
+#define CONFIG_SYS_REFINT      0x1580
 #endif
 
 /* Burst To Precharge. Bits of this value go to MCCR3 and MCCR4. */
-#define CFG_BSTOPRE	0x91c
+#define CONFIG_SYS_BSTOPRE	0x91c
 
 /* Bit-field values for MCCR3.  */
-#define CFG_REFREC      7
+#define CONFIG_SYS_REFREC      7
 
 /* Bit-field values for MCCR4.  */
-#define CFG_PRETOACT		2
-#define CFG_ACTTOPRE		2	/* Original value was 2	*/
-#define CFG_ACTORW		2
+#define CONFIG_SYS_PRETOACT		2
+#define CONFIG_SYS_ACTTOPRE		2	/* Original value was 2	*/
+#define CONFIG_SYS_ACTORW		2
 #if defined(CONFIG_LAN) || defined(CONFIG_HLAN)
-#define CFG_SDMODE_CAS_LAT	2	/* For 100MHz bus	*/
-/*#define CFG_SDMODE_BURSTLEN	3*/
+#define CONFIG_SYS_SDMODE_CAS_LAT	2	/* For 100MHz bus	*/
+/*#define CONFIG_SYS_SDMODE_BURSTLEN	3*/
 #elif defined(CONFIG_HGLAN) || defined(CONFIG_HTGL)
-#define CFG_SDMODE_CAS_LAT	3	/* For 133MHz bus	*/
-/*#define CFG_SDMODE_BURSTLEN	2*/
+#define CONFIG_SYS_SDMODE_CAS_LAT	3	/* For 133MHz bus	*/
+/*#define CONFIG_SYS_SDMODE_BURSTLEN	2*/
 #endif
-#define CFG_REGISTERD_TYPE_BUFFER 1
-#define CFG_EXTROM		1	/* Original setting but there is no EXTROM */
-#define CFG_REGDIMM		0
-#define CFG_DBUS_SIZE2		1
-#define CFG_SDMODE_WRAP		0
+#define CONFIG_SYS_REGISTERD_TYPE_BUFFER 1
+#define CONFIG_SYS_EXTROM		1	/* Original setting but there is no EXTROM */
+#define CONFIG_SYS_REGDIMM		0
+#define CONFIG_SYS_DBUS_SIZE2		1
+#define CONFIG_SYS_SDMODE_WRAP		0
 
-#define CFG_PGMAX		0x32	/* All boards use this setting. Original 0x92 */
-#define CFG_SDRAM_DSCD		0x30
+#define CONFIG_SYS_PGMAX		0x32	/* All boards use this setting. Original 0x92 */
+#define CONFIG_SYS_SDRAM_DSCD		0x30
 
 /* Memory bank settings.
  * Only bits 20-29 are actually used from these vales to set the
@@ -356,32 +356,32 @@
  * address. Refer to the MPC8240 book.
  */
 
-#define CFG_BANK0_START	    0x00000000
-#define CFG_BANK0_END	    (CFG_MAX_RAM_SIZE - 1)
-#define CFG_BANK0_ENABLE    1
-#define CFG_BANK1_START     0x3ff00000
-#define CFG_BANK1_END       0x3fffffff
-#define CFG_BANK1_ENABLE    0
-#define CFG_BANK2_START     0x3ff00000
-#define CFG_BANK2_END       0x3fffffff
-#define CFG_BANK2_ENABLE    0
-#define CFG_BANK3_START     0x3ff00000
-#define CFG_BANK3_END       0x3fffffff
-#define CFG_BANK3_ENABLE    0
-#define CFG_BANK4_START     0x3ff00000
-#define CFG_BANK4_END       0x3fffffff
-#define CFG_BANK4_ENABLE    0
-#define CFG_BANK5_START     0x3ff00000
-#define CFG_BANK5_END       0x3fffffff
-#define CFG_BANK5_ENABLE    0
-#define CFG_BANK6_START     0x3ff00000
-#define CFG_BANK6_END       0x3fffffff
-#define CFG_BANK6_ENABLE    0
-#define CFG_BANK7_START     0x3ff00000
-#define CFG_BANK7_END       0x3fffffff
-#define CFG_BANK7_ENABLE    0
-
-#define CFG_ODCR	    0x15
+#define CONFIG_SYS_BANK0_START	    0x00000000
+#define CONFIG_SYS_BANK0_END	    (CONFIG_SYS_MAX_RAM_SIZE - 1)
+#define CONFIG_SYS_BANK0_ENABLE    1
+#define CONFIG_SYS_BANK1_START     0x3ff00000
+#define CONFIG_SYS_BANK1_END       0x3fffffff
+#define CONFIG_SYS_BANK1_ENABLE    0
+#define CONFIG_SYS_BANK2_START     0x3ff00000
+#define CONFIG_SYS_BANK2_END       0x3fffffff
+#define CONFIG_SYS_BANK2_ENABLE    0
+#define CONFIG_SYS_BANK3_START     0x3ff00000
+#define CONFIG_SYS_BANK3_END       0x3fffffff
+#define CONFIG_SYS_BANK3_ENABLE    0
+#define CONFIG_SYS_BANK4_START     0x3ff00000
+#define CONFIG_SYS_BANK4_END       0x3fffffff
+#define CONFIG_SYS_BANK4_ENABLE    0
+#define CONFIG_SYS_BANK5_START     0x3ff00000
+#define CONFIG_SYS_BANK5_END       0x3fffffff
+#define CONFIG_SYS_BANK5_ENABLE    0
+#define CONFIG_SYS_BANK6_START     0x3ff00000
+#define CONFIG_SYS_BANK6_END       0x3fffffff
+#define CONFIG_SYS_BANK6_ENABLE    0
+#define CONFIG_SYS_BANK7_START     0x3ff00000
+#define CONFIG_SYS_BANK7_END       0x3fffffff
+#define CONFIG_SYS_BANK7_ENABLE    0
+
+#define CONFIG_SYS_ODCR	    0x15
 
 /*----------------------------------------------------------------------
  * Initial BAT mappings
@@ -393,32 +393,32 @@
  */
 
 /* SDRAM */
-#define CFG_IBAT0L	(CFG_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
-#define CFG_IBAT0U	(CFG_SDRAM_BASE | BATU_BL_128M | BATU_VS | BATU_VP)
+#define CONFIG_SYS_IBAT0L	(CONFIG_SYS_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
+#define CONFIG_SYS_IBAT0U	(CONFIG_SYS_SDRAM_BASE | BATU_BL_128M | BATU_VS | BATU_VP)
 
-#define CFG_DBAT0L	CFG_IBAT0L
-#define CFG_DBAT0U	CFG_IBAT0U
+#define CONFIG_SYS_DBAT0L	CONFIG_SYS_IBAT0L
+#define CONFIG_SYS_DBAT0U	CONFIG_SYS_IBAT0U
 
 /* EUMB: 1MB of address space */
-#define CFG_IBAT1L	(CFG_EUMB_ADDR | BATL_PP_10 | BATL_CACHEINHIBIT)
-#define CFG_IBAT1U	(CFG_EUMB_ADDR | BATU_BL_1M | BATU_VS | BATU_VP)
+#define CONFIG_SYS_IBAT1L	(CONFIG_SYS_EUMB_ADDR | BATL_PP_10 | BATL_CACHEINHIBIT)
+#define CONFIG_SYS_IBAT1U	(CONFIG_SYS_EUMB_ADDR | BATU_BL_1M | BATU_VS | BATU_VP)
 
-#define CFG_DBAT1L	(CFG_IBAT1L | BATL_GUARDEDSTORAGE)
-#define CFG_DBAT1U	CFG_IBAT1U
+#define CONFIG_SYS_DBAT1L	(CONFIG_SYS_IBAT1L | BATL_GUARDEDSTORAGE)
+#define CONFIG_SYS_DBAT1U	CONFIG_SYS_IBAT1U
 
 /* PCI Mem: 256MB of address space */
-#define CFG_IBAT2L	(CFG_PCI_MEM_ADDR | BATL_PP_10 | BATL_CACHEINHIBIT)
-#define CFG_IBAT2U	(CFG_PCI_MEM_ADDR | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CONFIG_SYS_IBAT2L	(CONFIG_SYS_PCI_MEM_ADDR | BATL_PP_10 | BATL_CACHEINHIBIT)
+#define CONFIG_SYS_IBAT2U	(CONFIG_SYS_PCI_MEM_ADDR | BATU_BL_256M | BATU_VS | BATU_VP)
 
-#define CFG_DBAT2L	(CFG_IBAT2L | BATL_GUARDEDSTORAGE)
-#define CFG_DBAT2U	CFG_IBAT2U
+#define CONFIG_SYS_DBAT2L	(CONFIG_SYS_IBAT2L | BATL_GUARDEDSTORAGE)
+#define CONFIG_SYS_DBAT2U	CONFIG_SYS_IBAT2U
 
 /* PCI and local ROM/Flash: last 32MB of address space */
-#define CFG_IBAT3L	(CFG_MISC_REGION_ADDR | BATL_PP_10 | BATL_CACHEINHIBIT)
-#define CFG_IBAT3U	(CFG_MISC_REGION_ADDR | BATU_BL_32M | BATU_VS | BATU_VP)
+#define CONFIG_SYS_IBAT3L	(CONFIG_SYS_MISC_REGION_ADDR | BATL_PP_10 | BATL_CACHEINHIBIT)
+#define CONFIG_SYS_IBAT3U	(CONFIG_SYS_MISC_REGION_ADDR | BATU_BL_32M | BATU_VS | BATU_VP)
 
-#define CFG_DBAT3L	(CFG_IBAT3L | BATL_GUARDEDSTORAGE)
-#define CFG_DBAT3U	CFG_IBAT3U
+#define CONFIG_SYS_DBAT3L	(CONFIG_SYS_IBAT3L | BATL_GUARDEDSTORAGE)
+#define CONFIG_SYS_DBAT3U	CONFIG_SYS_IBAT3U
 
 /*
  * For booting Linux, the board info and command line data
@@ -428,44 +428,44 @@
  * FIXME: This doesn't appear to be true for the newer kernels
  * which map more that 8 MB
  */
-#define CFG_BOOTMAPSZ	(8 << 20)	/* Initial Memory map for Linux */
+#define CONFIG_SYS_BOOTMAPSZ	(8 << 20)	/* Initial Memory map for Linux */
 
 /*-----------------------------------------------------------------------
  * FLASH organization
  */
-#define CFG_FLASH_CFI			/* The flash is CFI compatible	*/
+#define CONFIG_SYS_FLASH_CFI			/* The flash is CFI compatible	*/
 #define CONFIG_FLASH_CFI_DRIVER		/* Use common CFI driver	*/
 
-#undef  CFG_FLASH_PROTECTION
-#define CFG_FLASH_BANKS_LIST	{ CFG_FLASH_BASE }
-#define CFG_MAX_FLASH_BANKS	1	/* Max number of flash banks		*/
-#define CFG_MAX_FLASH_SECT	72	/* Max number of sectors per flash	*/
+#undef  CONFIG_SYS_FLASH_PROTECTION
+#define CONFIG_SYS_FLASH_BANKS_LIST	{ CONFIG_SYS_FLASH_BASE }
+#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* Max number of flash banks		*/
+#define CONFIG_SYS_MAX_FLASH_SECT	72	/* Max number of sectors per flash	*/
 
-#define CFG_FLASH_ERASE_TOUT	12000
-#define CFG_FLASH_WRITE_TOUT	1000
+#define CONFIG_SYS_FLASH_ERASE_TOUT	12000
+#define CONFIG_SYS_FLASH_WRITE_TOUT	1000
 
-#define CFG_FLASH_USE_BUFFER_WRITE 1	/* use buffered writes (20x faster)	*/
+#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1	/* use buffered writes (20x faster)	*/
 
-#define CFG_FLASH_EMPTY_INFO		/* print 'E' for empty sector on flinfo */
-#define CFG_FLASH_QUIET_TEST	1	/* don't warn upon unknown flash	*/
+#define CONFIG_SYS_FLASH_EMPTY_INFO		/* print 'E' for empty sector on flinfo */
+#define CONFIG_SYS_FLASH_QUIET_TEST	1	/* don't warn upon unknown flash	*/
 
-#define CFG_ENV_IS_IN_FLASH
+#define CONFIG_ENV_IS_IN_FLASH
 /*
  * The original LinkStation flash organisation uses
  * 448 kB (0xFFF00000 - 0xFFF6FFFF) for the boot loader
  * We use the last sector of this area to store the environment
  * which leaves max. 384 kB for the U-Boot itself
  */
-#define CFG_ENV_ADDR		0xFFF60000
-#define CFG_ENV_SIZE		0x00010000
-#define CFG_ENV_SECT_SIZE	0x00010000
+#define CONFIG_ENV_ADDR		0xFFF60000
+#define CONFIG_ENV_SIZE		0x00010000
+#define CONFIG_ENV_SECT_SIZE	0x00010000
 
 /*-----------------------------------------------------------------------
  * Cache Configuration
  */
-#define CFG_CACHELINE_SIZE	32
+#define CONFIG_SYS_CACHELINE_SIZE	32
 #ifdef CONFIG_CMD_KGDB
-#define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value	*/
+#define CONFIG_SYS_CACHELINE_SHIFT	5	/* log base 2 of the above value	*/
 #endif
 
 /*-----------------------------------------------------------------------
@@ -477,20 +477,20 @@
 #define CONFIG_LBA48				/* 48 bit LBA supported		*/
 
 #if defined(CONFIG_LAN) || defined(CONFIG_HLAN) || defined(CONFIG_HGLAN)
-#define CFG_IDE_MAXBUS		1		/* Scan only 1 IDE bus		*/
-#define CFG_IDE_MAXDEVICE	1		/* Only 1 drive per IDE bus	*/
+#define CONFIG_SYS_IDE_MAXBUS		1		/* Scan only 1 IDE bus		*/
+#define CONFIG_SYS_IDE_MAXDEVICE	1		/* Only 1 drive per IDE bus	*/
 #elif defined(CONFIG_HGTL)
-#define CFG_IDE_MAXBUS		2		/* Max. 2 IDE busses		*/
-#define CFG_IDE_MAXDEVICE	2		/* max. 2 drives per IDE bus	*/
+#define CONFIG_SYS_IDE_MAXBUS		2		/* Max. 2 IDE busses		*/
+#define CONFIG_SYS_IDE_MAXDEVICE	2		/* max. 2 drives per IDE bus	*/
 #else
 #error Config IDE: Unknown LinkStation type
 #endif
 
-#define CFG_ATA_BASE_ADDR	0
+#define CONFIG_SYS_ATA_BASE_ADDR	0
 
-#define CFG_ATA_DATA_OFFSET	0		/* Offset for data I/O		*/
-#define CFG_ATA_REG_OFFSET	0		/* Offset for normal registers	*/
-#define CFG_ATA_ALT_OFFSET	0		/* Offset for alternate registers */
+#define CONFIG_SYS_ATA_DATA_OFFSET	0		/* Offset for data I/O		*/
+#define CONFIG_SYS_ATA_REG_OFFSET	0		/* Offset for normal registers	*/
+#define CONFIG_SYS_ATA_ALT_OFFSET	0		/* Offset for alternate registers */
 
 /*-----------------------------------------------------------------------
  * Partitions and file system
diff --git a/include/configs/logodl.h b/include/configs/logodl.h
index 047b4a4f7..bb6f943ae 100644
--- a/include/configs/logodl.h
+++ b/include/configs/logodl.h
@@ -96,35 +96,35 @@
  * used for the RAM copy of the uboot code
  *
  */
-#define CFG_MALLOC_LEN		(256*1024)
+#define CONFIG_SYS_MALLOC_LEN		(256*1024)
 
-#define CFG_LONGHELP				/* undef to save memory         */
-#define CFG_PROMPT		"uboot> "	/* Monitor Command Prompt       */
-#define CFG_CBSIZE		256		/* Console I/O Buffer Size      */
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define CFG_MAXARGS		16		/* max number of command args   */
-#define CFG_BARGSIZE		CFG_CBSIZE	/* Boot Argument Buffer Size    */
+#define CONFIG_SYS_LONGHELP				/* undef to save memory         */
+#define CONFIG_SYS_PROMPT		"uboot> "	/* Monitor Command Prompt       */
+#define CONFIG_SYS_CBSIZE		256		/* Console I/O Buffer Size      */
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS		16		/* max number of command args   */
+#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size    */
 
-#define CFG_MEMTEST_START	0x08000000      /* memtest works on             */
-#define CFG_MEMTEST_END         0x0800ffff	/* 64 KiB                       */
+#define CONFIG_SYS_MEMTEST_START	0x08000000      /* memtest works on             */
+#define CONFIG_SYS_MEMTEST_END         0x0800ffff	/* 64 KiB                       */
 
-#undef  CFG_CLKS_IN_HZ          /* everything, incl board info, in Hz */
+#undef  CONFIG_SYS_CLKS_IN_HZ          /* everything, incl board info, in Hz */
 
-#define CFG_LOAD_ADDR           0x08000000      /* load kernel to this address   */
+#define CONFIG_SYS_LOAD_ADDR           0x08000000      /* load kernel to this address   */
 
-#define CFG_HZ                  3686400         /* incrementer freq: 3.6864 MHz */
+#define CONFIG_SYS_HZ                  3686400         /* incrementer freq: 3.6864 MHz */
 						/* RS: the oscillator is actually 3680130?? */
 
-#define CFG_CPUSPEED            0x141           /* set core clock to 200/200/100 MHz */
+#define CONFIG_SYS_CPUSPEED            0x141           /* set core clock to 200/200/100 MHz */
 						/* 0101000001 */
 						/*      ^^^^^ Memory Speed 99.53 MHz         */
 						/*    ^^      Run Mode Speed = 2x Mem Speed  */
 						/* ^^         Turbo Mode Sp. = 1x Run M. Sp. */
 
-#define CFG_MONITOR_LEN		0x20000		/* 128 KiB */
+#define CONFIG_SYS_MONITOR_LEN		0x20000		/* 128 KiB */
 
 						/* valid baudrates */
-#define CFG_BAUDRATE_TABLE      { 9600, 19200, 38400, 57600, 115200 }
+#define CONFIG_SYS_BAUDRATE_TABLE      { 9600, 19200, 38400, 57600, 115200 }
 
 /*
  * SMSC91C111 Network Card
@@ -160,10 +160,10 @@
 #define PHYS_FLASH_2		0x01000000	/* Flash Bank #2            */
 #define PHYS_FLASH_SIZE		(32*1024*1024)	/* 32 MB                    */
 
-#define CFG_DRAM_BASE		PHYS_SDRAM_1	/* RAM starts here          */
-#define CFG_DRAM_SIZE		PHYS_SDRAM_1_SIZE
+#define CONFIG_SYS_DRAM_BASE		PHYS_SDRAM_1	/* RAM starts here          */
+#define CONFIG_SYS_DRAM_SIZE		PHYS_SDRAM_1_SIZE
 
-#define CFG_FLASH_BASE          PHYS_FLASH_1
+#define CONFIG_SYS_FLASH_BASE          PHYS_FLASH_1
 
 
 /*
@@ -213,53 +213,53 @@
 #define _BIT31      0x80000000
 
 
-#define CFG_LED_A_BIT           (_BIT18)
-#define CFG_LED_A_SR            GPSR0
-#define CFG_LED_A_CR            GPCR0
+#define CONFIG_SYS_LED_A_BIT           (_BIT18)
+#define CONFIG_SYS_LED_A_SR            GPSR0
+#define CONFIG_SYS_LED_A_CR            GPCR0
 
-#define CFG_LED_B_BIT           (_BIT16)
-#define CFG_LED_B_SR            GPSR1
-#define CFG_LED_B_CR            GPCR1
+#define CONFIG_SYS_LED_B_BIT           (_BIT16)
+#define CONFIG_SYS_LED_B_SR            GPSR1
+#define CONFIG_SYS_LED_B_CR            GPCR1
 
 
 /* LED A: off, LED B: off */
-#define CFG_GPSR0_VAL       (_BIT1+_BIT6+_BIT8+_BIT9+_BIT11+_BIT15+_BIT16+_BIT18)
-#define CFG_GPSR1_VAL       (_BIT0+_BIT1+_BIT16+_BIT24+_BIT25  +_BIT7+_BIT8+_BIT9+_BIT11+_BIT13)
-#define CFG_GPSR2_VAL       (_BIT14+_BIT15+_BIT16)
+#define CONFIG_SYS_GPSR0_VAL       (_BIT1+_BIT6+_BIT8+_BIT9+_BIT11+_BIT15+_BIT16+_BIT18)
+#define CONFIG_SYS_GPSR1_VAL       (_BIT0+_BIT1+_BIT16+_BIT24+_BIT25  +_BIT7+_BIT8+_BIT9+_BIT11+_BIT13)
+#define CONFIG_SYS_GPSR2_VAL       (_BIT14+_BIT15+_BIT16)
 
-#define CFG_GPCR0_VAL       0x00000000
-#define CFG_GPCR1_VAL       0x00000000
-#define CFG_GPCR2_VAL       0x00000000
+#define CONFIG_SYS_GPCR0_VAL       0x00000000
+#define CONFIG_SYS_GPCR1_VAL       0x00000000
+#define CONFIG_SYS_GPCR2_VAL       0x00000000
 
-#define CFG_GPDR0_VAL       (_BIT1+_BIT6+_BIT8+_BIT9+_BIT11+_BIT15+_BIT16+_BIT17+_BIT18)
-#define CFG_GPDR1_VAL       (_BIT0+_BIT1+_BIT16+_BIT24+_BIT25  +_BIT7+_BIT8+_BIT9+_BIT11+_BIT13)
-#define CFG_GPDR2_VAL       (_BIT14+_BIT15+_BIT16)
+#define CONFIG_SYS_GPDR0_VAL       (_BIT1+_BIT6+_BIT8+_BIT9+_BIT11+_BIT15+_BIT16+_BIT17+_BIT18)
+#define CONFIG_SYS_GPDR1_VAL       (_BIT0+_BIT1+_BIT16+_BIT24+_BIT25  +_BIT7+_BIT8+_BIT9+_BIT11+_BIT13)
+#define CONFIG_SYS_GPDR2_VAL       (_BIT14+_BIT15+_BIT16)
 
-#define CFG_GAFR0_L_VAL     (_BIT22+_BIT24+_BIT31)
-#define CFG_GAFR0_U_VAL     (_BIT15+_BIT17+_BIT19+\
+#define CONFIG_SYS_GAFR0_L_VAL     (_BIT22+_BIT24+_BIT31)
+#define CONFIG_SYS_GAFR0_U_VAL     (_BIT15+_BIT17+_BIT19+\
 			     _BIT20+_BIT22+_BIT24+_BIT26+_BIT29+_BIT31)
-#define CFG_GAFR1_L_VAL     (_BIT3+_BIT4+_BIT6+_BIT8+_BIT10+_BIT12+_BIT15+_BIT17+_BIT19+\
+#define CONFIG_SYS_GAFR1_L_VAL     (_BIT3+_BIT4+_BIT6+_BIT8+_BIT10+_BIT12+_BIT15+_BIT17+_BIT19+\
 			     _BIT20+_BIT23+_BIT24+_BIT27+_BIT28+_BIT31)
-#define CFG_GAFR1_U_VAL     (_BIT21+_BIT23+_BIT25+_BIT27+_BIT29+_BIT31)
-#define CFG_GAFR2_L_VAL     (_BIT1+_BIT3+_BIT5+_BIT7+_BIT9+_BIT11+_BIT13+_BIT15+_BIT17+\
+#define CONFIG_SYS_GAFR1_U_VAL     (_BIT21+_BIT23+_BIT25+_BIT27+_BIT29+_BIT31)
+#define CONFIG_SYS_GAFR2_L_VAL     (_BIT1+_BIT3+_BIT5+_BIT7+_BIT9+_BIT11+_BIT13+_BIT15+_BIT17+\
 			     _BIT19+_BIT21+_BIT23+_BIT25+_BIT27+_BIT29+_BIT31)
-#define CFG_GAFR2_U_VAL     (_BIT1)
+#define CONFIG_SYS_GAFR2_U_VAL     (_BIT1)
 
-#define CFG_PSSR_VAL        (0x20)
+#define CONFIG_SYS_PSSR_VAL        (0x20)
 
 /*
  * Memory settings
  */
-#define CFG_MSC0_VAL	0x123c2980
-#define CFG_MSC1_VAL	0x123c2661
-#define CFG_MSC2_VAL	0x7ff87ff8
+#define CONFIG_SYS_MSC0_VAL	0x123c2980
+#define CONFIG_SYS_MSC1_VAL	0x123c2661
+#define CONFIG_SYS_MSC2_VAL	0x7ff87ff8
 
 
 /* no sdram/pcmcia here */
-#define CFG_MDCNFG_VAL		0x00000000
-#define CFG_MDREFR_VAL		0x00000000
-#define CFG_MDREFR_VAL_100	0x00000000
-#define CFG_MDMRS_VAL		0x00000000
+#define CONFIG_SYS_MDCNFG_VAL		0x00000000
+#define CONFIG_SYS_MDREFR_VAL		0x00000000
+#define CONFIG_SYS_MDREFR_VAL_100	0x00000000
+#define CONFIG_SYS_MDMRS_VAL		0x00000000
 
 /* only SRAM */
 #define SXCNFG_SETTINGS	0x00000000
@@ -268,28 +268,28 @@
  * PCMCIA and CF Interfaces
  */
 
-#define CFG_MECR_VAL        0x00000000
-#define CFG_MCMEM0_VAL      0x00010504
-#define CFG_MCMEM1_VAL      0x00010504
-#define CFG_MCATT0_VAL      0x00010504
-#define CFG_MCATT1_VAL      0x00010504
-#define CFG_MCIO0_VAL       0x00004715
-#define CFG_MCIO1_VAL       0x00004715
+#define CONFIG_SYS_MECR_VAL        0x00000000
+#define CONFIG_SYS_MCMEM0_VAL      0x00010504
+#define CONFIG_SYS_MCMEM1_VAL      0x00010504
+#define CONFIG_SYS_MCATT0_VAL      0x00010504
+#define CONFIG_SYS_MCATT1_VAL      0x00010504
+#define CONFIG_SYS_MCIO0_VAL       0x00004715
+#define CONFIG_SYS_MCIO1_VAL       0x00004715
 
 
 /*
  * FLASH and environment organization
  */
-#define CFG_MAX_FLASH_BANKS     2       /* max number of memory banks           */
-#define CFG_MAX_FLASH_SECT      128  /* max number of sectors on one chip    */
+#define CONFIG_SYS_MAX_FLASH_BANKS     2       /* max number of memory banks           */
+#define CONFIG_SYS_MAX_FLASH_SECT      128  /* max number of sectors on one chip    */
 
 /* timeout values are in ticks */
-#define CFG_FLASH_ERASE_TOUT    (2*CFG_HZ) /* Timeout for Flash Erase */
-#define CFG_FLASH_WRITE_TOUT    (2*CFG_HZ) /* Timeout for Flash Write */
+#define CONFIG_SYS_FLASH_ERASE_TOUT    (2*CONFIG_SYS_HZ) /* Timeout for Flash Erase */
+#define CONFIG_SYS_FLASH_WRITE_TOUT    (2*CONFIG_SYS_HZ) /* Timeout for Flash Write */
 
 /* FIXME */
-#define	CFG_ENV_IS_IN_FLASH	1
-#define CFG_ENV_ADDR            (PHYS_FLASH_1 + 0x1C000)        /* Addr of Environment Sector   */
-#define CFG_ENV_SIZE            0x4000  /* Total Size of Environment Sector     */
+#define	CONFIG_ENV_IS_IN_FLASH	1
+#define CONFIG_ENV_ADDR            (PHYS_FLASH_1 + 0x1C000)        /* Addr of Environment Sector   */
+#define CONFIG_ENV_SIZE            0x4000  /* Total Size of Environment Sector     */
 
 #endif  /* __CONFIG_H */
diff --git a/include/configs/lpc2292sodimm.h b/include/configs/lpc2292sodimm.h
index e3fef5e2c..563d35b20 100644
--- a/include/configs/lpc2292sodimm.h
+++ b/include/configs/lpc2292sodimm.h
@@ -49,8 +49,8 @@
 /*
  * Size of malloc() pool
  */
-#define CFG_MALLOC_LEN		(CFG_ENV_SIZE + 128*1024)
-#define CFG_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
+#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + 128*1024)
+#define CONFIG_SYS_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
 
 /*
  * Hardware drivers
@@ -96,26 +96,26 @@
 /*
  * Miscellaneous configurable options
  */
-#define	CFG_LONGHELP				/* undef to save memory		*/
-#define	CFG_PROMPT		"LPC2292SODIMM # " /* Monitor Command Prompt	*/
-#define	CFG_CBSIZE		256		/* Console I/O Buffer Size	*/
-#define	CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define	CFG_MAXARGS		16		/* max number of command args	*/
-#define CFG_BARGSIZE		CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+#define	CONFIG_SYS_LONGHELP				/* undef to save memory		*/
+#define	CONFIG_SYS_PROMPT		"LPC2292SODIMM # " /* Monitor Command Prompt	*/
+#define	CONFIG_SYS_CBSIZE		256		/* Console I/O Buffer Size	*/
+#define	CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define	CONFIG_SYS_MAXARGS		16		/* max number of command args	*/
+#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
 
-#define CFG_MEMTEST_START	0x40000000	/* memtest works on	*/
-#define CFG_MEMTEST_END		0x40000000	/* 4 ... 8 MB in DRAM	*/
+#define CONFIG_SYS_MEMTEST_START	0x40000000	/* memtest works on	*/
+#define CONFIG_SYS_MEMTEST_END		0x40000000	/* 4 ... 8 MB in DRAM	*/
 
-#undef	CFG_CLKS_IN_HZ		/* everything, incl board info, in Hz */
+#undef	CONFIG_SYS_CLKS_IN_HZ		/* everything, incl board info, in Hz */
 
-#define	CFG_LOAD_ADDR		0x00040000	/* default load address	for	*/
+#define	CONFIG_SYS_LOAD_ADDR		0x00040000	/* default load address	for	*/
 						/* armadillo: kernel img is here*/
 
-#define CFG_SYS_CLK_FREQ	58982400	/* Hz */
-#define	CFG_HZ			2048		/* decrementer freq in Hz */
+#define CONFIG_SYS_SYS_CLK_FREQ	58982400	/* Hz */
+#define	CONFIG_SYS_HZ			2048		/* decrementer freq in Hz */
 
 						/* valid baudrates */
-#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
 
 /*-----------------------------------------------------------------------
  * Stack sizes
@@ -138,21 +138,21 @@
 #define PHYS_FLASH_1		0x80000000 /* Flash Bank #1 */
 #define PHYS_FLASH_SIZE		0x00200000 /* 2 MB */
 
-#define CFG_FLASH_BASE		PHYS_FLASH_1
+#define CONFIG_SYS_FLASH_BASE		PHYS_FLASH_1
 
 /*-----------------------------------------------------------------------
  * FLASH and environment organization
  */
-#define CFG_MAX_FLASH_BANKS	2	/* max number of memory banks		*/
-#define CFG_MAX_FLASH_SECT	1024	/* max number of sectors on one chip	*/
+#define CONFIG_SYS_MAX_FLASH_BANKS	2	/* max number of memory banks		*/
+#define CONFIG_SYS_MAX_FLASH_SECT	1024	/* max number of sectors on one chip	*/
 
 /* timeout values are in ticks */
-#define CFG_FLASH_ERASE_TOUT	(2*CFG_HZ) /* Timeout for Flash Erase */
-#define CFG_FLASH_WRITE_TOUT	(2*CFG_HZ) /* Timeout for Flash Write */
+#define CONFIG_SYS_FLASH_ERASE_TOUT	(2*CONFIG_SYS_HZ) /* Timeout for Flash Erase */
+#define CONFIG_SYS_FLASH_WRITE_TOUT	(2*CONFIG_SYS_HZ) /* Timeout for Flash Write */
 
-#define	CFG_ENV_IS_IN_FLASH	1
-#define CFG_ENV_ADDR		(0x0 + 0x3C000)	/* Addr of Environment Sector	*/
-#define CFG_ENV_SIZE		0x2000 /* Total Size of Environment Sector	*/
+#define	CONFIG_ENV_IS_IN_FLASH	1
+#define CONFIG_ENV_ADDR		(0x0 + 0x3C000)	/* Addr of Environment Sector	*/
+#define CONFIG_ENV_SIZE		0x2000 /* Total Size of Environment Sector	*/
 
 #define CONFIG_CMDLINE_TAG
 #define CONFIG_SETUP_MEMORY_TAGS
diff --git a/include/configs/lpd7a400-10.h b/include/configs/lpd7a400-10.h
index 3722fd293..6145c37f7 100644
--- a/include/configs/lpd7a400-10.h
+++ b/include/configs/lpd7a400-10.h
@@ -34,7 +34,7 @@
 #define CONFIG_SYS_CLK_FREQ		14745600   /* System Clock PLL Input (Hz) */
 
 /* ticks per second */
-#define CFG_HZ	(508469)
+#define CONFIG_SYS_HZ	(508469)
 
 /*-----------------------------------------------------------------------
  * Stack sizes
@@ -54,17 +54,17 @@
 #define PHYS_SDRAM_1		0xc0000000 /* SDRAM Bank #1 */
 #define PHYS_SDRAM_1_SIZE	0x02000000 /* 32 MB */
 
-#define CFG_FLASH_BASE		0x00000000 /* Flash Bank #1 */
+#define CONFIG_SYS_FLASH_BASE		0x00000000 /* Flash Bank #1 */
 
 /*-----------------------------------------------------------------------
  * FLASH and environment organization
  */
-#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks */
-#define CFG_MAX_FLASH_SECT	(64)	/* max number of sectors on one chip */
+#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks */
+#define CONFIG_SYS_MAX_FLASH_SECT	(64)	/* max number of sectors on one chip */
 
 /* timeout values are in ticks */
-#define CFG_FLASH_ERASE_TOUT	(5*CFG_HZ) /* Timeout for Flash Erase */
-#define CFG_FLASH_WRITE_TOUT	(5*CFG_HZ) /* Timeout for Flash Write */
+#define CONFIG_SYS_FLASH_ERASE_TOUT	(5*CONFIG_SYS_HZ) /* Timeout for Flash Erase */
+#define CONFIG_SYS_FLASH_WRITE_TOUT	(5*CONFIG_SYS_HZ) /* Timeout for Flash Write */
 
 /*----------------------------------------------------------------------
  * Using SMC91C111 LAN chip
diff --git a/include/configs/lpd7a400.h b/include/configs/lpd7a400.h
index 04148898e..575f2a1c5 100644
--- a/include/configs/lpd7a400.h
+++ b/include/configs/lpd7a400.h
@@ -37,8 +37,8 @@
 /*
  * Size of malloc() pool
  */
-#define CFG_MALLOC_LEN		(CFG_ENV_SIZE + 128*1024)
-#define CFG_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
+#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + 128*1024)
+#define CONFIG_SYS_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
 
 /*
  * select serial console configuration
@@ -89,31 +89,31 @@
 /*
  * Miscellaneous configurable options
  */
-#define	CFG_LONGHELP				/* undef to save memory		*/
-#define	CFG_PROMPT		"LPD7A400> "	/* Monitor Command Prompt	*/
-#define	CFG_CBSIZE		256		/* Console I/O Buffer Size	*/
-#define	CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define	CFG_MAXARGS		16		/* max number of command args	*/
-#define CFG_BARGSIZE		CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+#define	CONFIG_SYS_LONGHELP				/* undef to save memory		*/
+#define	CONFIG_SYS_PROMPT		"LPD7A400> "	/* Monitor Command Prompt	*/
+#define	CONFIG_SYS_CBSIZE		256		/* Console I/O Buffer Size	*/
+#define	CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define	CONFIG_SYS_MAXARGS		16		/* max number of command args	*/
+#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
 
-#define CFG_MEMTEST_START	0xc0300000	/* memtest works on	*/
-#define CFG_MEMTEST_END		0xc0500000	/* 2 MB in DRAM	*/
+#define CONFIG_SYS_MEMTEST_START	0xc0300000	/* memtest works on	*/
+#define CONFIG_SYS_MEMTEST_END		0xc0500000	/* 2 MB in DRAM	*/
 
-#undef  CFG_CLKS_IN_HZ		/* everything, incl board info, in Hz */
+#undef  CONFIG_SYS_CLKS_IN_HZ		/* everything, incl board info, in Hz */
 
-#define	CFG_LOAD_ADDR		0xc0f00000	/* default load address	*/
+#define	CONFIG_SYS_LOAD_ADDR		0xc0f00000	/* default load address	*/
 
 /* valid baudrates */
-#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
 
 /* size and location of u-boot in flash */
-#define CFG_MONITOR_BASE	CFG_FLASH_BASE
-#define CFG_MONITOR_LEN		(256<<10)
+#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_FLASH_BASE
+#define CONFIG_SYS_MONITOR_LEN		(256<<10)
 
-#define	CFG_ENV_IS_IN_FLASH	1
+#define	CONFIG_ENV_IS_IN_FLASH	1
 
 /* Address and size of Primary Environment Sector	*/
-#define CFG_ENV_ADDR		(CFG_FLASH_BASE + 0xFC0000)
-#define CFG_ENV_SIZE		0x40000
+#define CONFIG_ENV_ADDR		(CONFIG_SYS_FLASH_BASE + 0xFC0000)
+#define CONFIG_ENV_SIZE		0x40000
 
 #endif  /* __LPD7A400_H_ */
diff --git a/include/configs/lpd7a404-10.h b/include/configs/lpd7a404-10.h
index a8af950b6..ce23f3d60 100644
--- a/include/configs/lpd7a404-10.h
+++ b/include/configs/lpd7a404-10.h
@@ -34,7 +34,7 @@
 #define CONFIG_SYS_CLK_FREQ		14745600   /* System Clock PLL Input (Hz) */
 
 /* ticks per second */
-#define CFG_HZ	(508469)
+#define CONFIG_SYS_HZ	(508469)
 
 /*-----------------------------------------------------------------------
  * Stack sizes
@@ -54,17 +54,17 @@
 #define PHYS_SDRAM_1		0xc0000000 /* SDRAM Bank #1 */
 #define PHYS_SDRAM_1_SIZE	0x02000000 /* 32 MB */
 
-#define CFG_FLASH_BASE		0x00000000 /* Flash Bank #1 */
+#define CONFIG_SYS_FLASH_BASE		0x00000000 /* Flash Bank #1 */
 
 /*-----------------------------------------------------------------------
  * FLASH and environment organization
  */
-#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks */
-#define CFG_MAX_FLASH_SECT	(64)	/* max number of sectors on one chip */
+#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks */
+#define CONFIG_SYS_MAX_FLASH_SECT	(64)	/* max number of sectors on one chip */
 
 /* timeout values are in ticks */
-#define CFG_FLASH_ERASE_TOUT	(5*CFG_HZ) /* Timeout for Flash Erase */
-#define CFG_FLASH_WRITE_TOUT	(5*CFG_HZ) /* Timeout for Flash Write */
+#define CONFIG_SYS_FLASH_ERASE_TOUT	(5*CONFIG_SYS_HZ) /* Timeout for Flash Erase */
+#define CONFIG_SYS_FLASH_WRITE_TOUT	(5*CONFIG_SYS_HZ) /* Timeout for Flash Write */
 
 /*----------------------------------------------------------------------
  * Using SMC91C111 LAN chip
diff --git a/include/configs/lpd7a404.h b/include/configs/lpd7a404.h
index 11ede9681..3e726a01d 100644
--- a/include/configs/lpd7a404.h
+++ b/include/configs/lpd7a404.h
@@ -37,8 +37,8 @@
 /*
  * Size of malloc() pool
  */
-#define CFG_MALLOC_LEN		(CFG_ENV_SIZE + 128*1024)
-#define CFG_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
+#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + 128*1024)
+#define CONFIG_SYS_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
 
 /*
  * select serial console configuration
@@ -89,31 +89,31 @@
 /*
  * Miscellaneous configurable options
  */
-#define	CFG_LONGHELP				/* undef to save memory		*/
-#define	CFG_PROMPT		"LPD7A404> "	/* Monitor Command Prompt	*/
-#define	CFG_CBSIZE		256		/* Console I/O Buffer Size	*/
-#define	CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define	CFG_MAXARGS		16		/* max number of command args	*/
-#define CFG_BARGSIZE		CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+#define	CONFIG_SYS_LONGHELP				/* undef to save memory		*/
+#define	CONFIG_SYS_PROMPT		"LPD7A404> "	/* Monitor Command Prompt	*/
+#define	CONFIG_SYS_CBSIZE		256		/* Console I/O Buffer Size	*/
+#define	CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define	CONFIG_SYS_MAXARGS		16		/* max number of command args	*/
+#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
 
-#define CFG_MEMTEST_START	0xc0300000	/* memtest works on	*/
-#define CFG_MEMTEST_END		0xc0500000	/* 2 MB in DRAM	*/
+#define CONFIG_SYS_MEMTEST_START	0xc0300000	/* memtest works on	*/
+#define CONFIG_SYS_MEMTEST_END		0xc0500000	/* 2 MB in DRAM	*/
 
-#undef  CFG_CLKS_IN_HZ		/* everything, incl board info, in Hz */
+#undef  CONFIG_SYS_CLKS_IN_HZ		/* everything, incl board info, in Hz */
 
-#define	CFG_LOAD_ADDR		0xc0f00000	/* default load address	*/
+#define	CONFIG_SYS_LOAD_ADDR		0xc0f00000	/* default load address	*/
 
 /* valid baudrates */
-#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
 
 /* size and location of u-boot in flash */
-#define CFG_MONITOR_BASE	CFG_FLASH_BASE
-#define CFG_MONITOR_LEN		(256<<10)
+#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_FLASH_BASE
+#define CONFIG_SYS_MONITOR_LEN		(256<<10)
 
-#define	CFG_ENV_IS_IN_FLASH	1
+#define	CONFIG_ENV_IS_IN_FLASH	1
 
 /* Address and size of Primary Environment Sector	*/
-#define CFG_ENV_ADDR		(CFG_FLASH_BASE + 0xFC0000)
-#define CFG_ENV_SIZE		0x40000
+#define CONFIG_ENV_ADDR		(CONFIG_SYS_FLASH_BASE + 0xFC0000)
+#define CONFIG_ENV_SIZE		0x40000
 
 #endif  /* __LPD7A404_H_ */
diff --git a/include/configs/luan.h b/include/configs/luan.h
index 805cc59b3..b158b741b 100644
--- a/include/configs/luan.h
+++ b/include/configs/luan.h
@@ -50,44 +50,44 @@
  * Base addresses -- Note these are effective addresses where the
  * actual resources get mapped (not physical addresses)
  *----------------------------------------------------------------------*/
-#define CFG_LARGE_FLASH		0xffc00000	/* 4MB flash address CS0 */
-#define CFG_SMALL_FLASH		0xff900000	/* 1MB flash address CS2 */
-#define CFG_SRAM_BASE		0xff800000	/* 1MB SRAM  address CS2 */
-#define CFG_EPLD_BASE		0xff000000	/* EPLD and FRAM     CS1 */
+#define CONFIG_SYS_LARGE_FLASH		0xffc00000	/* 4MB flash address CS0 */
+#define CONFIG_SYS_SMALL_FLASH		0xff900000	/* 1MB flash address CS2 */
+#define CONFIG_SYS_SRAM_BASE		0xff800000	/* 1MB SRAM  address CS2 */
+#define CONFIG_SYS_EPLD_BASE		0xff000000	/* EPLD and FRAM     CS1 */
 
-#define CFG_ISRAM_BASE	        0xf8000000	/* internal 8k SRAM (L2 cache) */
+#define CONFIG_SYS_ISRAM_BASE	        0xf8000000	/* internal 8k SRAM (L2 cache) */
 
-#define CFG_PERIPHERAL_BASE     0xf0000000	/* internal peripherals */
+#define CONFIG_SYS_PERIPHERAL_BASE     0xf0000000	/* internal peripherals */
 
-#define CFG_PCI_MEMBASE		0x80000000	/* mapped pci memory */
-#define CFG_PCI_BASE		0xd0000000	/* internal PCI regs */
-#define CFG_PCI_TARGBASE	0x80000000	/* PCIaddr mapped to CFG_PCI_MEMBASE */
+#define CONFIG_SYS_PCI_MEMBASE		0x80000000	/* mapped pci memory */
+#define CONFIG_SYS_PCI_BASE		0xd0000000	/* internal PCI regs */
+#define CONFIG_SYS_PCI_TARGBASE	0x80000000	/* PCIaddr mapped to CONFIG_SYS_PCI_MEMBASE */
 
-#if CFG_LARGE_FLASH == 0xffc00000
-#define CFG_FLASH_BASE		CFG_LARGE_FLASH
+#if CONFIG_SYS_LARGE_FLASH == 0xffc00000
+#define CONFIG_SYS_FLASH_BASE		CONFIG_SYS_LARGE_FLASH
 #else
-#define CFG_FLASH_BASE		CFG_SMALL_FLASH
+#define CONFIG_SYS_FLASH_BASE		CONFIG_SYS_SMALL_FLASH
 #endif
 
-#if CFG_SRAM_BASE
-#define CFG_KBYTES_SDRAM	1024*2
+#if CONFIG_SYS_SRAM_BASE
+#define CONFIG_SYS_KBYTES_SDRAM	1024*2
 #else
-#define CFG_KBYTES_SDRAM	1024
+#define CONFIG_SYS_KBYTES_SDRAM	1024
 #endif
 
 /*-----------------------------------------------------------------------
  * Initial RAM & stack pointer (placed in SDRAM)
  *----------------------------------------------------------------------*/
-#define CFG_INIT_RAM_ADDR	CFG_ISRAM_BASE
-#define CFG_INIT_RAM_END	(8 << 10)
-#define CFG_GBL_DATA_SIZE	256		/* num bytes initial data */
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_ISRAM_BASE
+#define CONFIG_SYS_INIT_RAM_END	(8 << 10)
+#define CONFIG_SYS_GBL_DATA_SIZE	256		/* num bytes initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
 /*-----------------------------------------------------------------------
  * Serial Port
  *----------------------------------------------------------------------*/
-#define CFG_EXT_SERIAL_CLOCK	11059200 /* external 11.059MHz clk */
+#define CONFIG_SYS_EXT_SERIAL_CLOCK	11059200 /* external 11.059MHz clk */
 #undef  CONFIG_UART1_CONSOLE		/* define if you want console on UART1 */
 
 /*-----------------------------------------------------------------------
@@ -97,32 +97,32 @@
  * Define here the location of the environment variables (FLASH or EEPROM).
  * Note: DENX encourages to use redundant environment in FLASH.
  */
-#define CFG_ENV_IS_IN_FLASH     1	/* use FLASH for environment vars	*/
+#define CONFIG_ENV_IS_IN_FLASH     1	/* use FLASH for environment vars	*/
 
 /*-----------------------------------------------------------------------
  * FLASH related
  *----------------------------------------------------------------------*/
-#define CFG_MAX_FLASH_BANKS	3	/* max number of memory banks		*/
-#define CFG_MAX_FLASH_SECT	64	/* max number of sectors on one chip	*/
+#define CONFIG_SYS_MAX_FLASH_BANKS	3	/* max number of memory banks		*/
+#define CONFIG_SYS_MAX_FLASH_SECT	64	/* max number of sectors on one chip	*/
 
-#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
-#define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
+#define CONFIG_SYS_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
+#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
 
-#define CFG_FLASH_EMPTY_INFO		/* print 'E' for empty sector on flinfo */
+#define CONFIG_SYS_FLASH_EMPTY_INFO		/* print 'E' for empty sector on flinfo */
 
-#define CFG_FLASH_ADDR0         0x555
-#define CFG_FLASH_ADDR1         0x2aa
-#define CFG_FLASH_WORD_SIZE     unsigned char
+#define CONFIG_SYS_FLASH_ADDR0         0x555
+#define CONFIG_SYS_FLASH_ADDR1         0x2aa
+#define CONFIG_SYS_FLASH_WORD_SIZE     unsigned char
 
-#ifdef CFG_ENV_IS_IN_FLASH
-#define CFG_ENV_SECT_SIZE	0x10000 /* size of one complete sector	*/
-#define CFG_ENV_ADDR		(CFG_MONITOR_BASE-CFG_ENV_SECT_SIZE)
-#define CFG_ENV_SIZE		0x2000	/* Total Size of Environment Sector	*/
+#ifdef CONFIG_ENV_IS_IN_FLASH
+#define CONFIG_ENV_SECT_SIZE	0x10000 /* size of one complete sector	*/
+#define CONFIG_ENV_ADDR		(CONFIG_SYS_MONITOR_BASE-CONFIG_ENV_SECT_SIZE)
+#define CONFIG_ENV_SIZE		0x2000	/* Total Size of Environment Sector	*/
 
 /* Address and size of Redundant Environment Sector	*/
-#define CFG_ENV_ADDR_REDUND	(CFG_ENV_ADDR-CFG_ENV_SECT_SIZE)
-#define CFG_ENV_SIZE_REDUND	(CFG_ENV_SIZE)
-#endif /* CFG_ENV_IS_IN_FLASH */
+#define CONFIG_ENV_ADDR_REDUND	(CONFIG_ENV_ADDR-CONFIG_ENV_SECT_SIZE)
+#define CONFIG_ENV_SIZE_REDUND	(CONFIG_ENV_SIZE)
+#endif /* CONFIG_ENV_IS_IN_FLASH */
 
 /*-----------------------------------------------------------------------
  * DDR SDRAM
@@ -134,14 +134,13 @@
 /*-----------------------------------------------------------------------
  * I2C
  *----------------------------------------------------------------------*/
-#define CFG_I2C_SPEED		400000	/* I2C speed and slave address	*/
+#define CONFIG_SYS_I2C_SPEED		400000	/* I2C speed and slave address	*/
 
-#define CFG_I2C_MULTI_EEPROMS
-#define CFG_I2C_EEPROM_ADDR	(0xa8>>1)
-#define CFG_I2C_EEPROM_ADDR_LEN 1
-#define CFG_EEPROM_PAGE_WRITE_ENABLE
-#define CFG_EEPROM_PAGE_WRITE_BITS 3
-#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10
+#define CONFIG_SYS_I2C_MULTI_EEPROMS
+#define CONFIG_SYS_I2C_EEPROM_ADDR	(0xa8>>1)
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10
 
 /*
  * Default environment variables
@@ -183,11 +182,11 @@
 #define CONFIG_PCI_SCAN_SHOW            /* show pci devices on startup  */
 
 /* Board-specific PCI */
-#define CFG_PCI_TARGET_INIT
-#undef  CFG_PCI_MASTER_INIT
+#define CONFIG_SYS_PCI_TARGET_INIT
+#undef  CONFIG_SYS_PCI_MASTER_INIT
 
-#define CFG_PCI_SUBSYS_VENDORID 0x10e8	/* AMCC */
-#define CFG_PCI_SUBSYS_DEVICEID 0x4403	/* whatever */
+#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x10e8	/* AMCC */
+#define CONFIG_SYS_PCI_SUBSYS_DEVICEID 0x4403	/* whatever */
 
 #endif
 
diff --git a/include/configs/lubbock.h b/include/configs/lubbock.h
index 82fe19c72..208910eb9 100644
--- a/include/configs/lubbock.h
+++ b/include/configs/lubbock.h
@@ -49,8 +49,8 @@
 /*
  * Size of malloc() pool
  */
-#define CFG_MALLOC_LEN	    (CFG_ENV_SIZE + 128*1024)
-#define CFG_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
+#define CONFIG_SYS_MALLOC_LEN	    (CONFIG_ENV_SIZE + 128*1024)
+#define CONFIG_SYS_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
 
 /*
  * Hardware drivers
@@ -105,35 +105,35 @@
 /*
  * Miscellaneous configurable options
  */
-#define CFG_HUSH_PARSER		1
-#define CFG_PROMPT_HUSH_PS2	"> "
+#define CONFIG_SYS_HUSH_PARSER		1
+#define CONFIG_SYS_PROMPT_HUSH_PS2	"> "
 
-#define CFG_LONGHELP				/* undef to save memory		*/
-#ifdef CFG_HUSH_PARSER
-#define CFG_PROMPT		"$ "		/* Monitor Command Prompt */
+#define CONFIG_SYS_LONGHELP				/* undef to save memory		*/
+#ifdef CONFIG_SYS_HUSH_PARSER
+#define CONFIG_SYS_PROMPT		"$ "		/* Monitor Command Prompt */
 #else
-#define CFG_PROMPT		"=> "		/* Monitor Command Prompt */
+#define CONFIG_SYS_PROMPT		"=> "		/* Monitor Command Prompt */
 #endif
-#define CFG_CBSIZE		256		/* Console I/O Buffer Size	*/
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define CFG_MAXARGS		16		/* max number of command args	*/
-#define CFG_BARGSIZE		CFG_CBSIZE	/* Boot Argument Buffer Size	*/
-#define CFG_DEVICE_NULLDEV	1
+#define CONFIG_SYS_CBSIZE		256		/* Console I/O Buffer Size	*/
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS		16		/* max number of command args	*/
+#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
+#define CONFIG_SYS_DEVICE_NULLDEV	1
 
-#define CFG_MEMTEST_START	0xa0400000	/* memtest works on	*/
-#define CFG_MEMTEST_END		0xa0800000	/* 4 ... 8 MB in DRAM	*/
+#define CONFIG_SYS_MEMTEST_START	0xa0400000	/* memtest works on	*/
+#define CONFIG_SYS_MEMTEST_END		0xa0800000	/* 4 ... 8 MB in DRAM	*/
 
-#undef	CFG_CLKS_IN_HZ		/* everything, incl board info, in Hz */
+#undef	CONFIG_SYS_CLKS_IN_HZ		/* everything, incl board info, in Hz */
 
-#define CFG_LOAD_ADDR	(CFG_DRAM_BASE + 0x8000) /* default load address */
+#define CONFIG_SYS_LOAD_ADDR	(CONFIG_SYS_DRAM_BASE + 0x8000) /* default load address */
 
-#define CFG_HZ			3686400		/* incrementer freq: 3.6864 MHz */
-#define CFG_CPUSPEED		0x161		/* set core clock to 400/200/100 MHz */
+#define CONFIG_SYS_HZ			3686400		/* incrementer freq: 3.6864 MHz */
+#define CONFIG_SYS_CPUSPEED		0x161		/* set core clock to 400/200/100 MHz */
 
 						/* valid baudrates */
-#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
 
-#define CFG_MMC_BASE		0xF0000000
+#define CONFIG_SYS_MMC_BASE		0xF0000000
 
 /*
  * Stack sizes
@@ -165,54 +165,54 @@
 #define PHYS_FLASH_BANK_SIZE	0x02000000 /* 32 MB Banks */
 #define PHYS_FLASH_SECT_SIZE	0x00040000 /* 256 KB sectors (x2) */
 
-#define CFG_DRAM_BASE		0xa0000000
-#define CFG_DRAM_SIZE		0x04000000
+#define CONFIG_SYS_DRAM_BASE		0xa0000000
+#define CONFIG_SYS_DRAM_SIZE		0x04000000
 
-#define CFG_FLASH_BASE		PHYS_FLASH_1
+#define CONFIG_SYS_FLASH_BASE		PHYS_FLASH_1
 
 #define FPGA_REGS_BASE_PHYSICAL 0x08000000
 
 /*
  * GPIO settings
  */
-#define CFG_GPSR0_VAL		0x00008000
-#define CFG_GPSR1_VAL		0x00FC0382
-#define CFG_GPSR2_VAL		0x0001FFFF
-#define CFG_GPCR0_VAL		0x00000000
-#define CFG_GPCR1_VAL		0x00000000
-#define CFG_GPCR2_VAL		0x00000000
-#define CFG_GPDR0_VAL		0x0060A800
-#define CFG_GPDR1_VAL		0x00FF0382
-#define CFG_GPDR2_VAL		0x0001C000
-#define CFG_GAFR0_L_VAL		0x98400000
-#define CFG_GAFR0_U_VAL		0x00002950
-#define CFG_GAFR1_L_VAL		0x000A9558
-#define CFG_GAFR1_U_VAL		0x0005AAAA
-#define CFG_GAFR2_L_VAL		0xA0000000
-#define CFG_GAFR2_U_VAL		0x00000002
-
-#define CFG_PSSR_VAL		0x20
+#define CONFIG_SYS_GPSR0_VAL		0x00008000
+#define CONFIG_SYS_GPSR1_VAL		0x00FC0382
+#define CONFIG_SYS_GPSR2_VAL		0x0001FFFF
+#define CONFIG_SYS_GPCR0_VAL		0x00000000
+#define CONFIG_SYS_GPCR1_VAL		0x00000000
+#define CONFIG_SYS_GPCR2_VAL		0x00000000
+#define CONFIG_SYS_GPDR0_VAL		0x0060A800
+#define CONFIG_SYS_GPDR1_VAL		0x00FF0382
+#define CONFIG_SYS_GPDR2_VAL		0x0001C000
+#define CONFIG_SYS_GAFR0_L_VAL		0x98400000
+#define CONFIG_SYS_GAFR0_U_VAL		0x00002950
+#define CONFIG_SYS_GAFR1_L_VAL		0x000A9558
+#define CONFIG_SYS_GAFR1_U_VAL		0x0005AAAA
+#define CONFIG_SYS_GAFR2_L_VAL		0xA0000000
+#define CONFIG_SYS_GAFR2_U_VAL		0x00000002
+
+#define CONFIG_SYS_PSSR_VAL		0x20
 
 /*
  * Memory settings
  */
-#define CFG_MSC0_VAL		0x23F223F2
-#define CFG_MSC1_VAL		0x3FF1A441
-#define CFG_MSC2_VAL		0x7FF97FF1
-#define CFG_MDCNFG_VAL		0x00001AC9
-#define CFG_MDREFR_VAL		0x00018018
-#define CFG_MDMRS_VAL		0x00000000
+#define CONFIG_SYS_MSC0_VAL		0x23F223F2
+#define CONFIG_SYS_MSC1_VAL		0x3FF1A441
+#define CONFIG_SYS_MSC2_VAL		0x7FF97FF1
+#define CONFIG_SYS_MDCNFG_VAL		0x00001AC9
+#define CONFIG_SYS_MDREFR_VAL		0x00018018
+#define CONFIG_SYS_MDMRS_VAL		0x00000000
 
 /*
  * PCMCIA and CF Interfaces
  */
-#define CFG_MECR_VAL		0x00000000
-#define CFG_MCMEM0_VAL		0x00010504
-#define CFG_MCMEM1_VAL		0x00010504
-#define CFG_MCATT0_VAL		0x00010504
-#define CFG_MCATT1_VAL		0x00010504
-#define CFG_MCIO0_VAL		0x00004715
-#define CFG_MCIO1_VAL		0x00004715
+#define CONFIG_SYS_MECR_VAL		0x00000000
+#define CONFIG_SYS_MCMEM0_VAL		0x00010504
+#define CONFIG_SYS_MCMEM1_VAL		0x00010504
+#define CONFIG_SYS_MCATT0_VAL		0x00010504
+#define CONFIG_SYS_MCATT1_VAL		0x00010504
+#define CONFIG_SYS_MCIO0_VAL		0x00004715
+#define CONFIG_SYS_MCIO1_VAL		0x00004715
 
 #define _LED			0x08000010
 #define LED_BLANK		0x08000040
@@ -220,21 +220,21 @@
 /*
  * FLASH and environment organization
  */
-#define CFG_MAX_FLASH_BANKS	2	/* max number of memory banks		*/
-#define CFG_MAX_FLASH_SECT	128  /* max number of sectors on one chip    */
+#define CONFIG_SYS_MAX_FLASH_BANKS	2	/* max number of memory banks		*/
+#define CONFIG_SYS_MAX_FLASH_SECT	128  /* max number of sectors on one chip    */
 
 /* timeout values are in ticks */
-#define CFG_FLASH_ERASE_TOUT	(25*CFG_HZ) /* Timeout for Flash Erase */
-#define CFG_FLASH_WRITE_TOUT	(25*CFG_HZ) /* Timeout for Flash Write */
+#define CONFIG_SYS_FLASH_ERASE_TOUT	(25*CONFIG_SYS_HZ) /* Timeout for Flash Erase */
+#define CONFIG_SYS_FLASH_WRITE_TOUT	(25*CONFIG_SYS_HZ) /* Timeout for Flash Write */
 
 /* NOTE: many default partitioning schemes assume the kernel starts at the
  * second sector, not an environment.  You have been warned!
  */
-#define	CFG_MONITOR_LEN		PHYS_FLASH_SECT_SIZE
-#define CFG_ENV_IS_IN_FLASH	1
-#define CFG_ENV_ADDR		(PHYS_FLASH_1 + PHYS_FLASH_SECT_SIZE)
-#define CFG_ENV_SECT_SIZE	PHYS_FLASH_SECT_SIZE
-#define CFG_ENV_SIZE		(PHYS_FLASH_SECT_SIZE / 16)
+#define	CONFIG_SYS_MONITOR_LEN		PHYS_FLASH_SECT_SIZE
+#define CONFIG_ENV_IS_IN_FLASH	1
+#define CONFIG_ENV_ADDR		(PHYS_FLASH_1 + PHYS_FLASH_SECT_SIZE)
+#define CONFIG_ENV_SECT_SIZE	PHYS_FLASH_SECT_SIZE
+#define CONFIG_ENV_SIZE		(PHYS_FLASH_SECT_SIZE / 16)
 
 
 /*
diff --git a/include/configs/lwmon.h b/include/configs/lwmon.h
index 87abfba14..d52a5e0cf 100644
--- a/include/configs/lwmon.h
+++ b/include/configs/lwmon.h
@@ -73,18 +73,18 @@
 #undef	CONFIG_BOOTARGS
 
 /* POST support */
-#define CONFIG_POST		(CFG_POST_CACHE	   | \
-				 CFG_POST_WATCHDOG | \
-				 CFG_POST_RTC	   | \
-				 CFG_POST_MEMORY   | \
-				 CFG_POST_CPU	   | \
-				 CFG_POST_UART	   | \
-				 CFG_POST_ETHER    | \
-				 CFG_POST_I2C	   | \
-				 CFG_POST_SPI	   | \
-				 CFG_POST_USB	   | \
-				 CFG_POST_SPR	   | \
-				 CFG_POST_SYSMON)
+#define CONFIG_POST		(CONFIG_SYS_POST_CACHE	   | \
+				 CONFIG_SYS_POST_WATCHDOG | \
+				 CONFIG_SYS_POST_RTC	   | \
+				 CONFIG_SYS_POST_MEMORY   | \
+				 CONFIG_SYS_POST_CPU	   | \
+				 CONFIG_SYS_POST_UART	   | \
+				 CONFIG_SYS_POST_ETHER    | \
+				 CONFIG_SYS_POST_I2C	   | \
+				 CONFIG_SYS_POST_SPI	   | \
+				 CONFIG_SYS_POST_USB	   | \
+				 CONFIG_SYS_POST_SPR	   | \
+				 CONFIG_SYS_POST_SYSMON)
 
 /*
  * Keyboard commands:
@@ -135,10 +135,10 @@
 	"verify=no"
 
 #define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
-#undef	CFG_LOADS_BAUD_CHANGE		/* don't allow baudrate change	*/
+#undef	CONFIG_SYS_LOADS_BAUD_CHANGE		/* don't allow baudrate change	*/
 
 #define	CONFIG_WATCHDOG		1	/* watchdog enabled		*/
-#define	CFG_WATCHDOG_FREQ       (CFG_HZ / 20)
+#define	CONFIG_SYS_WATCHDOG_FREQ       (CONFIG_SYS_HZ / 20)
 
 #undef	CONFIG_STATUS_LED		/* Status LED disabled		*/
 
@@ -146,8 +146,8 @@
 #undef	CONFIG_HARD_I2C			/* I2C with hardware support	*/
 #define	CONFIG_SOFT_I2C         1	/* I2C bit-banged		*/
 
-#define CFG_I2C_SPEED		93000	/* 93 kHz is supposed to work	*/
-#define CFG_I2C_SLAVE		0xFE
+#define CONFIG_SYS_I2C_SPEED		93000	/* 93 kHz is supposed to work	*/
+#define CONFIG_SYS_I2C_SLAVE		0xFE
 
 #ifdef CONFIG_SOFT_I2C
 /*
@@ -209,39 +209,39 @@
 /*
  * Miscellaneous configurable options
  */
-#define CFG_LONGHELP			/* undef to save memory		*/
-#define CFG_PROMPT	"=> "		/* Monitor Command Prompt	*/
+#define CONFIG_SYS_LONGHELP			/* undef to save memory		*/
+#define CONFIG_SYS_PROMPT	"=> "		/* Monitor Command Prompt	*/
 
-#define	CFG_HUSH_PARSER		1	/* use "hush" command parser	*/
-#ifdef	CFG_HUSH_PARSER
-#define	CFG_PROMPT_HUSH_PS2	"> "
+#define	CONFIG_SYS_HUSH_PARSER		1	/* use "hush" command parser	*/
+#ifdef	CONFIG_SYS_HUSH_PARSER
+#define	CONFIG_SYS_PROMPT_HUSH_PS2	"> "
 #endif
 
 #if defined(CONFIG_CMD_KGDB)
-#define CFG_CBSIZE	1024		/* Console I/O Buffer Size	*/
+#define CONFIG_SYS_CBSIZE	1024		/* Console I/O Buffer Size	*/
 #else
-#define CFG_CBSIZE	256		/* Console I/O Buffer Size	*/
+#define CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size	*/
 #endif
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define CFG_MAXARGS	16		/* max number of command args	*/
-#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS	16		/* max number of command args	*/
+#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
 
-#define CFG_MEMTEST_START	0x00100000	/* memtest works on	*/
-#define CFG_MEMTEST_END		0x00F00000	/* 1 ... 15MB in DRAM	*/
+#define CONFIG_SYS_MEMTEST_START	0x00100000	/* memtest works on	*/
+#define CONFIG_SYS_MEMTEST_END		0x00F00000	/* 1 ... 15MB in DRAM	*/
 
-#define CFG_LOAD_ADDR		0x00100000	/* default load address */
+#define CONFIG_SYS_LOAD_ADDR		0x00100000	/* default load address */
 
-#define CFG_PIO_MODE		0	/* IDE interface in PIO Mode 0	*/
+#define CONFIG_SYS_PIO_MODE		0	/* IDE interface in PIO Mode 0	*/
 
-#define CFG_HZ			1000	/* decrementer freq: 1 ms ticks */
+#define CONFIG_SYS_HZ			1000	/* decrementer freq: 1 ms ticks */
 
 /*
  * When the watchdog is enabled, output must be fast enough in Linux.
  */
 #ifdef CONFIG_WATCHDOG
-#define CFG_BAUDRATE_TABLE	{		38400, 57600, 115200 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{		38400, 57600, 115200 }
 #else
-#define CFG_BAUDRATE_TABLE	{  9600, 19200, 38400, 57600, 115200 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{  9600, 19200, 38400, 57600, 115200 }
 #endif
 
 /*----------------------------------------------------------------------*/
@@ -266,120 +266,120 @@
 /*-----------------------------------------------------------------------
  * Internal Memory Mapped Register
  */
-#define CFG_IMMR		0xFFF00000
+#define CONFIG_SYS_IMMR		0xFFF00000
 
 /*-----------------------------------------------------------------------
  * Definitions for initial stack pointer and data area (in DPRAM)
  */
-#define CFG_INIT_RAM_ADDR	CFG_IMMR
-#define CFG_INIT_RAM_END	0x2F00	/* End of used area in DPRAM	*/
-#define CFG_GBL_DATA_SIZE	68  /* size in bytes reserved for initial data */
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_IMMR
+#define CONFIG_SYS_INIT_RAM_END	0x2F00	/* End of used area in DPRAM	*/
+#define CONFIG_SYS_GBL_DATA_SIZE	68  /* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
 /*-----------------------------------------------------------------------
  * Start addresses for the final memory configuration
  * (Set up by the startup code)
- * Please note that CFG_SDRAM_BASE _must_ start at 0
+ * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
  */
-#define CFG_SDRAM_BASE		0x00000000
-#define CFG_FLASH_BASE		0x40000000
+#define CONFIG_SYS_SDRAM_BASE		0x00000000
+#define CONFIG_SYS_FLASH_BASE		0x40000000
 #if defined(DEBUG) || defined(CONFIG_CMD_IDE)
-#define CFG_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor	*/
+#define CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor	*/
 #else
-#define CFG_MONITOR_LEN		(128 << 10)	/* Reserve 128 kB for Monitor	*/
+#define CONFIG_SYS_MONITOR_LEN		(128 << 10)	/* Reserve 128 kB for Monitor	*/
 #endif
-#define CFG_MONITOR_BASE	CFG_FLASH_BASE
-#define CFG_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/
+#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_FLASH_BASE
+#define CONFIG_SYS_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/
 
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
+#define CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
 /*-----------------------------------------------------------------------
  * FLASH organization
  */
-#define CFG_MAX_FLASH_BANKS	2	/* max number of memory banks		*/
-#define CFG_MAX_FLASH_SECT	128	/* max number of sectors on one chip	*/
+#define CONFIG_SYS_MAX_FLASH_BANKS	2	/* max number of memory banks		*/
+#define CONFIG_SYS_MAX_FLASH_SECT	128	/* max number of sectors on one chip	*/
 
-#define CFG_FLASH_ERASE_TOUT	180000	/* Timeout for Flash Erase (in ms)	*/
-#define CFG_FLASH_WRITE_TOUT	600	/* Timeout for Flash Write (in ms)	*/
-#define CFG_FLASH_USE_BUFFER_WRITE
-#define CFG_FLASH_BUFFER_WRITE_TOUT	2048	/* Timeout for Flash Buffer Write (in ms)	*/
+#define CONFIG_SYS_FLASH_ERASE_TOUT	180000	/* Timeout for Flash Erase (in ms)	*/
+#define CONFIG_SYS_FLASH_WRITE_TOUT	600	/* Timeout for Flash Write (in ms)	*/
+#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
+#define CONFIG_SYS_FLASH_BUFFER_WRITE_TOUT	2048	/* Timeout for Flash Buffer Write (in ms)	*/
 /* Buffer size.
    We have two flash devices connected in parallel.
    Each device incorporates a Write Buffer of 32 bytes.
  */
-#define CFG_FLASH_BUFFER_SIZE	(2*32)
+#define CONFIG_SYS_FLASH_BUFFER_SIZE	(2*32)
 
 /* Put environment in flash which is much faster to boot than using the EEPROM	*/
-#define CFG_ENV_IS_IN_FLASH	1
-#define CFG_ENV_ADDR	    0x40040000	/* Address    of Environment Sector	*/
-#define CFG_ENV_SIZE		0x2000	/* Total Size of Environment		*/
-#define CFG_ENV_SECT_SIZE	0x40000 /* we have BIG sectors only :-(		*/
+#define CONFIG_ENV_IS_IN_FLASH	1
+#define CONFIG_ENV_ADDR	    0x40040000	/* Address    of Environment Sector	*/
+#define CONFIG_ENV_SIZE		0x2000	/* Total Size of Environment		*/
+#define CONFIG_ENV_SECT_SIZE	0x40000 /* we have BIG sectors only :-(		*/
 
 /*-----------------------------------------------------------------------
  * I2C/EEPROM Configuration
  */
 
-#define CFG_I2C_AUDIO_ADDR	0x28	/* Audio volume control			*/
-#define CFG_I2C_SYSMON_ADDR	0x2E	/* LM87 System Monitor			*/
-#define CFG_I2C_RTC_ADDR	0x51	/* PCF8563 RTC				*/
-#define CFG_I2C_POWER_A_ADDR	0x52	/* PCMCIA/USB power switch, channel A	*/
-#define CFG_I2C_POWER_B_ADDR	0x53	/* PCMCIA/USB power switch, channel B	*/
-#define CFG_I2C_KEYBD_ADDR	0x56	/* PIC LWE keyboard			*/
-#define CFG_I2C_PICIO_ADDR	0x57	/* PIC IO Expander			*/
+#define CONFIG_SYS_I2C_AUDIO_ADDR	0x28	/* Audio volume control			*/
+#define CONFIG_SYS_I2C_SYSMON_ADDR	0x2E	/* LM87 System Monitor			*/
+#define CONFIG_SYS_I2C_RTC_ADDR	0x51	/* PCF8563 RTC				*/
+#define CONFIG_SYS_I2C_POWER_A_ADDR	0x52	/* PCMCIA/USB power switch, channel A	*/
+#define CONFIG_SYS_I2C_POWER_B_ADDR	0x53	/* PCMCIA/USB power switch, channel B	*/
+#define CONFIG_SYS_I2C_KEYBD_ADDR	0x56	/* PIC LWE keyboard			*/
+#define CONFIG_SYS_I2C_PICIO_ADDR	0x57	/* PIC IO Expander			*/
 
 #undef	CONFIG_USE_FRAM			/* Use FRAM instead of EEPROM	*/
 
 #ifdef CONFIG_USE_FRAM	/* use FRAM */
-#define CFG_I2C_EEPROM_ADDR	0x55	/* FRAM FM24CL64		*/
-#define CFG_I2C_EEPROM_ADDR_LEN	2
+#define CONFIG_SYS_I2C_EEPROM_ADDR	0x55	/* FRAM FM24CL64		*/
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN	2
 #else			/* use EEPROM */
-#define CFG_I2C_EEPROM_ADDR	0x58	/* EEPROM AT24C164		*/
-#define CFG_I2C_EEPROM_ADDR_LEN	1
-#define CFG_EEPROM_PAGE_WRITE_DELAY_MS	10	/* takes up to 10 msec	*/
+#define CONFIG_SYS_I2C_EEPROM_ADDR	0x58	/* EEPROM AT24C164		*/
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN	1
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	10	/* takes up to 10 msec	*/
 #endif	/* CONFIG_USE_FRAM */
-#define CFG_EEPROM_PAGE_WRITE_BITS	4
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS	4
 
 /* List of I2C addresses to be verified by POST */
 #ifdef CONFIG_USE_FRAM
-#define I2C_ADDR_LIST	{  /*	CFG_I2C_AUDIO_ADDR, */	\
-				CFG_I2C_SYSMON_ADDR,	\
-				CFG_I2C_RTC_ADDR,	\
-				CFG_I2C_POWER_A_ADDR,	\
-				CFG_I2C_POWER_B_ADDR,	\
-				CFG_I2C_KEYBD_ADDR,	\
-				CFG_I2C_PICIO_ADDR,	\
-				CFG_I2C_EEPROM_ADDR,	\
+#define I2C_ADDR_LIST	{  /*	CONFIG_SYS_I2C_AUDIO_ADDR, */	\
+				CONFIG_SYS_I2C_SYSMON_ADDR,	\
+				CONFIG_SYS_I2C_RTC_ADDR,	\
+				CONFIG_SYS_I2C_POWER_A_ADDR,	\
+				CONFIG_SYS_I2C_POWER_B_ADDR,	\
+				CONFIG_SYS_I2C_KEYBD_ADDR,	\
+				CONFIG_SYS_I2C_PICIO_ADDR,	\
+				CONFIG_SYS_I2C_EEPROM_ADDR,	\
 			}
 #else	/* Use EEPROM - which show up on 8 consequtive addresses */
-#define I2C_ADDR_LIST	{  /*	CFG_I2C_AUDIO_ADDR, */	\
-				CFG_I2C_SYSMON_ADDR,	\
-				CFG_I2C_RTC_ADDR,	\
-				CFG_I2C_POWER_A_ADDR,	\
-				CFG_I2C_POWER_B_ADDR,	\
-				CFG_I2C_KEYBD_ADDR,	\
-				CFG_I2C_PICIO_ADDR,	\
-				CFG_I2C_EEPROM_ADDR+0,	\
-				CFG_I2C_EEPROM_ADDR+1,	\
-				CFG_I2C_EEPROM_ADDR+2,	\
-				CFG_I2C_EEPROM_ADDR+3,	\
-				CFG_I2C_EEPROM_ADDR+4,	\
-				CFG_I2C_EEPROM_ADDR+5,	\
-				CFG_I2C_EEPROM_ADDR+6,	\
-				CFG_I2C_EEPROM_ADDR+7,	\
+#define I2C_ADDR_LIST	{  /*	CONFIG_SYS_I2C_AUDIO_ADDR, */	\
+				CONFIG_SYS_I2C_SYSMON_ADDR,	\
+				CONFIG_SYS_I2C_RTC_ADDR,	\
+				CONFIG_SYS_I2C_POWER_A_ADDR,	\
+				CONFIG_SYS_I2C_POWER_B_ADDR,	\
+				CONFIG_SYS_I2C_KEYBD_ADDR,	\
+				CONFIG_SYS_I2C_PICIO_ADDR,	\
+				CONFIG_SYS_I2C_EEPROM_ADDR+0,	\
+				CONFIG_SYS_I2C_EEPROM_ADDR+1,	\
+				CONFIG_SYS_I2C_EEPROM_ADDR+2,	\
+				CONFIG_SYS_I2C_EEPROM_ADDR+3,	\
+				CONFIG_SYS_I2C_EEPROM_ADDR+4,	\
+				CONFIG_SYS_I2C_EEPROM_ADDR+5,	\
+				CONFIG_SYS_I2C_EEPROM_ADDR+6,	\
+				CONFIG_SYS_I2C_EEPROM_ADDR+7,	\
 			}
 #endif	/* CONFIG_USE_FRAM */
 
 /*-----------------------------------------------------------------------
  * Cache Configuration
  */
-#define CFG_CACHELINE_SIZE	16	/* For all MPC8xx CPUs			*/
+#define CONFIG_SYS_CACHELINE_SIZE	16	/* For all MPC8xx CPUs			*/
 #if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT	4	/* log base 2 of the above value	*/
+#define CONFIG_SYS_CACHELINE_SHIFT	4	/* log base 2 of the above value	*/
 #endif
 
 /*-----------------------------------------------------------------------
@@ -389,10 +389,10 @@
  * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze
  */
 #if 0 && defined(CONFIG_WATCHDOG)	/* LWMON uses external MAX706TESA WD */
-#define CFG_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
+#define CONFIG_SYS_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
 			 SYPCR_SWE  | SYPCR_SWRI| SYPCR_SWP)
 #else
-#define CFG_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
+#define CONFIG_SYS_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
 #endif
 
 /*-----------------------------------------------------------------------
@@ -402,22 +402,22 @@
  */
 /* EARB, DBGC and DBPC are initialised by the HCW */
 /* => 0x000000C0 */
-#define CFG_SIUMCR	(SIUMCR_GB5E)
-/*#define CFG_SIUMCR	(SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_MLRC01) */
+#define CONFIG_SYS_SIUMCR	(SIUMCR_GB5E)
+/*#define CONFIG_SYS_SIUMCR	(SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_MLRC01) */
 
 /*-----------------------------------------------------------------------
  * TBSCR - Time Base Status and Control				11-26
  *-----------------------------------------------------------------------
  * Clear Reference Interrupt Status, Timebase freezing enabled
  */
-#define CFG_TBSCR	(TBSCR_REFA | TBSCR_REFB | TBSCR_TBF)
+#define CONFIG_SYS_TBSCR	(TBSCR_REFA | TBSCR_REFB | TBSCR_TBF)
 
 /*-----------------------------------------------------------------------
  * PISCR - Periodic Interrupt Status and Control		11-31
  *-----------------------------------------------------------------------
  * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
  */
-#define CFG_PISCR	(PISCR_PS | PISCR_PITF)
+#define CONFIG_SYS_PISCR	(PISCR_PS | PISCR_PITF)
 
 /*-----------------------------------------------------------------------
  * PLPRCR - PLL, Low-Power, and Reset Control Register		15-30
@@ -426,15 +426,15 @@
  * interrupt status bit, set PLL multiplication factor !
  */
 /* 0x00405000 */
-#define CFG_PLPRCR_MF	4	/* (4+1) * 13.2 = 66 MHz Clock */
-#define CFG_PLPRCR							\
-		(	(CFG_PLPRCR_MF << PLPRCR_MF_SHIFT) |		\
+#define CONFIG_SYS_PLPRCR_MF	4	/* (4+1) * 13.2 = 66 MHz Clock */
+#define CONFIG_SYS_PLPRCR							\
+		(	(CONFIG_SYS_PLPRCR_MF << PLPRCR_MF_SHIFT) |		\
 			PLPRCR_SPLSS | PLPRCR_TEXPS | PLPRCR_TMIST |	\
 			/*PLPRCR_CSRC|*/ PLPRCR_LPM_NORMAL |		\
 			PLPRCR_CSR    /*| PLPRCR_LOLRE|PLPRCR_FIOPD*/	\
 		)
 
-#define CONFIG_8xx_GCLK_FREQ	((CFG_PLPRCR_MF+1)*13200000)
+#define CONFIG_8xx_GCLK_FREQ	((CONFIG_SYS_PLPRCR_MF+1)*13200000)
 
 /*-----------------------------------------------------------------------
  * SCCR - System Clock and reset Control Register		15-27
@@ -444,7 +444,7 @@
  */
 #define SCCR_MASK	SCCR_EBDF11
 /* 0x01800000 */
-#define CFG_SCCR	(SCCR_COM00	| /*SCCR_TBS|*/		\
+#define CONFIG_SYS_SCCR	(SCCR_COM00	| /*SCCR_TBS|*/		\
 			 SCCR_RTDIV	|   SCCR_RTSEL	  |	\
 			 /*SCCR_CRQEN|*/  /*SCCR_PRQEN|*/	\
 			 SCCR_EBDF00 |	 SCCR_DFSYNC00 |	\
@@ -457,41 +457,41 @@
  *-----------------------------------------------------------------------
  */
 /* 0x00C3 => 0x0003 */
-#define CFG_RTCSC	(RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE)
+#define CONFIG_SYS_RTCSC	(RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE)
 
 
 /*-----------------------------------------------------------------------
  * RCCR - RISC Controller Configuration Register		19-4
  *-----------------------------------------------------------------------
  */
-#define CFG_RCCR 0x0000
+#define CONFIG_SYS_RCCR 0x0000
 
 /*-----------------------------------------------------------------------
  * RMDS - RISC Microcode Development Support Control Register
  *-----------------------------------------------------------------------
  */
-#define CFG_RMDS 0
+#define CONFIG_SYS_RMDS 0
 
 /*-----------------------------------------------------------------------
  *
  * Interrupt Levels
  *-----------------------------------------------------------------------
  */
-#define CFG_CPM_INTERRUPT	13	/* SIU_LEVEL6	*/
+#define CONFIG_SYS_CPM_INTERRUPT	13	/* SIU_LEVEL6	*/
 
 /*-----------------------------------------------------------------------
  * PCMCIA stuff
  *-----------------------------------------------------------------------
  *
  */
-#define CFG_PCMCIA_MEM_ADDR	(0x50000000)
-#define CFG_PCMCIA_MEM_SIZE	( 64 << 20 )
-#define CFG_PCMCIA_DMA_ADDR	(0x54000000)
-#define CFG_PCMCIA_DMA_SIZE	( 64 << 20 )
-#define CFG_PCMCIA_ATTRB_ADDR	(0x58000000)
-#define CFG_PCMCIA_ATTRB_SIZE	( 64 << 20 )
-#define CFG_PCMCIA_IO_ADDR	(0x5C000000)
-#define CFG_PCMCIA_IO_SIZE	( 64 << 20 )
+#define CONFIG_SYS_PCMCIA_MEM_ADDR	(0x50000000)
+#define CONFIG_SYS_PCMCIA_MEM_SIZE	( 64 << 20 )
+#define CONFIG_SYS_PCMCIA_DMA_ADDR	(0x54000000)
+#define CONFIG_SYS_PCMCIA_DMA_SIZE	( 64 << 20 )
+#define CONFIG_SYS_PCMCIA_ATTRB_ADDR	(0x58000000)
+#define CONFIG_SYS_PCMCIA_ATTRB_SIZE	( 64 << 20 )
+#define CONFIG_SYS_PCMCIA_IO_ADDR	(0x5C000000)
+#define CONFIG_SYS_PCMCIA_IO_SIZE	( 64 << 20 )
 
 /*-----------------------------------------------------------------------
  * IDE/ATA stuff (Supports IDE harddisk on PCMCIA Adapter)
@@ -504,21 +504,21 @@
 #undef	CONFIG_IDE_LED			/* LED	 for ide not supported	*/
 #undef	CONFIG_IDE_RESET		/* reset for ide not supported	*/
 
-#define CFG_IDE_MAXBUS		1	/* max. 1 IDE bus		*/
-#define CFG_IDE_MAXDEVICE	1	/* max. 1 drive per IDE bus	*/
+#define CONFIG_SYS_IDE_MAXBUS		1	/* max. 1 IDE bus		*/
+#define CONFIG_SYS_IDE_MAXDEVICE	1	/* max. 1 drive per IDE bus	*/
 
-#define CFG_ATA_IDE0_OFFSET	0x0000
+#define CONFIG_SYS_ATA_IDE0_OFFSET	0x0000
 
-#define CFG_ATA_BASE_ADDR	CFG_PCMCIA_MEM_ADDR
+#define CONFIG_SYS_ATA_BASE_ADDR	CONFIG_SYS_PCMCIA_MEM_ADDR
 
 /* Offset for data I/O			*/
-#define CFG_ATA_DATA_OFFSET	(CFG_PCMCIA_MEM_SIZE + 0x320)
+#define CONFIG_SYS_ATA_DATA_OFFSET	(CONFIG_SYS_PCMCIA_MEM_SIZE + 0x320)
 
 /* Offset for normal register accesses	*/
-#define CFG_ATA_REG_OFFSET	(2 * CFG_PCMCIA_MEM_SIZE + 0x320)
+#define CONFIG_SYS_ATA_REG_OFFSET	(2 * CONFIG_SYS_PCMCIA_MEM_SIZE + 0x320)
 
 /* Offset for alternate registers	*/
-#define CFG_ATA_ALT_OFFSET	0x0100
+#define CONFIG_SYS_ATA_ALT_OFFSET	0x0100
 
 #define CONFIG_SUPPORT_VFAT		/* enable VFAT support */
 
@@ -527,7 +527,7 @@
  *-----------------------------------------------------------------------
  *
  */
-#define CFG_DER 0
+#define CONFIG_SYS_DER 0
 
 /*
  * Init Memory Controller:
@@ -542,22 +542,22 @@
  * restrict access enough to keep SRAM working (if any)
  * but not too much to meddle with FLASH accesses
  */
-#define CFG_REMAP_OR_AM		0xFF000000	/* OR addr mask */
-#define CFG_PRELIM_OR_AM	0xFF000000	/* OR addr mask */
+#define CONFIG_SYS_REMAP_OR_AM		0xFF000000	/* OR addr mask */
+#define CONFIG_SYS_PRELIM_OR_AM	0xFF000000	/* OR addr mask */
 
 /* FLASH timing: ACS = 00, TRLX = 0, CSNT = 1, SCY = 8, EHTR = 0	*/
-#define CFG_OR_TIMING_FLASH	(OR_SCY_8_CLK)
+#define CONFIG_SYS_OR_TIMING_FLASH	(OR_SCY_8_CLK)
 
-#define CFG_OR0_REMAP	( CFG_REMAP_OR_AM | OR_CSNT_SAM | OR_ACS_DIV1 | OR_BI | \
-				CFG_OR_TIMING_FLASH)
-#define CFG_OR0_PRELIM	(CFG_PRELIM_OR_AM | OR_ACS_DIV1 | OR_BI | \
-				CFG_OR_TIMING_FLASH)
+#define CONFIG_SYS_OR0_REMAP	( CONFIG_SYS_REMAP_OR_AM | OR_CSNT_SAM | OR_ACS_DIV1 | OR_BI | \
+				CONFIG_SYS_OR_TIMING_FLASH)
+#define CONFIG_SYS_OR0_PRELIM	(CONFIG_SYS_PRELIM_OR_AM | OR_ACS_DIV1 | OR_BI | \
+				CONFIG_SYS_OR_TIMING_FLASH)
 /* 16 bit, bank valid */
-#define CFG_BR0_PRELIM	((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_PS_32 | BR_V )
+#define CONFIG_SYS_BR0_PRELIM	((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_PS_32 | BR_V )
 
-#define CFG_OR1_REMAP	CFG_OR0_REMAP
-#define CFG_OR1_PRELIM	CFG_OR0_PRELIM
-#define CFG_BR1_PRELIM	((FLASH_BASE1_PRELIM & BR_BA_MSK) | BR_PS_32 | BR_V )
+#define CONFIG_SYS_OR1_REMAP	CONFIG_SYS_OR0_REMAP
+#define CONFIG_SYS_OR1_PRELIM	CONFIG_SYS_OR0_PRELIM
+#define CONFIG_SYS_BR1_PRELIM	((FLASH_BASE1_PRELIM & BR_BA_MSK) | BR_PS_32 | BR_V )
 
 /*
  * BR3/OR3: SDRAM
@@ -570,8 +570,8 @@
 
 #define SDRAM_MAX_SIZE		0x08000000	/* max 128 MB SDRAM */
 
-#define CFG_OR3_PRELIM	(SDRAM_PRELIM_OR_AM | OR_CSNT_SAM | OR_G5LS | SDRAM_TIMING )
-#define CFG_BR3_PRELIM	((SDRAM_BASE3_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
+#define CONFIG_SYS_OR3_PRELIM	(SDRAM_PRELIM_OR_AM | OR_CSNT_SAM | OR_G5LS | SDRAM_TIMING )
+#define CONFIG_SYS_BR3_PRELIM	((SDRAM_BASE3_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
 
 /*
  * BR5/OR5: Touch Panel
@@ -582,32 +582,32 @@
 #define TOUCHPNL_OR_AM		0xFFFF8000
 #define TOUCHPNL_TIMING		OR_SCY_0_CLK
 
-#define CFG_OR5_PRELIM	(TOUCHPNL_OR_AM | OR_CSNT_SAM | OR_ACS_DIV1 | OR_BI | \
+#define CONFIG_SYS_OR5_PRELIM	(TOUCHPNL_OR_AM | OR_CSNT_SAM | OR_ACS_DIV1 | OR_BI | \
 			 TOUCHPNL_TIMING )
-#define CFG_BR5_PRELIM	((TOUCHPNL_BASE & BR_BA_MSK) | BR_PS_32 | BR_V )
+#define CONFIG_SYS_BR5_PRELIM	((TOUCHPNL_BASE & BR_BA_MSK) | BR_PS_32 | BR_V )
 
-#define	CFG_MEMORY_75
-#undef	CFG_MEMORY_7E
-#undef	CFG_MEMORY_8E
+#define	CONFIG_SYS_MEMORY_75
+#undef	CONFIG_SYS_MEMORY_7E
+#undef	CONFIG_SYS_MEMORY_8E
 
 /*
  * Memory Periodic Timer Prescaler
  */
 
 /* periodic timer for refresh */
-#define CFG_MPTPR	0x200
+#define CONFIG_SYS_MPTPR	0x200
 
 /*
  * MAMR settings for SDRAM
  */
 
-#define CFG_MAMR_8COL	0x80802114
-#define CFG_MAMR_9COL	0x80904114
+#define CONFIG_SYS_MAMR_8COL	0x80802114
+#define CONFIG_SYS_MAMR_9COL	0x80904114
 
 /*
  * MAR setting for SDRAM
  */
-#define CFG_MAR		0x00000088
+#define CONFIG_SYS_MAR		0x00000088
 
 /*
  * Internal Definitions
diff --git a/include/configs/lwmon5.h b/include/configs/lwmon5.h
index 3d135c4ea..05055c89a 100644
--- a/include/configs/lwmon5.h
+++ b/include/configs/lwmon5.h
@@ -42,32 +42,32 @@
  * Base addresses -- Note these are effective addresses where the
  * actual resources get mapped (not physical addresses)
  *----------------------------------------------------------------------*/
-#define CFG_MONITOR_LEN		(512 * 1024)	/* Reserve 512 kB for Monitor	*/
-#define CFG_MALLOC_LEN		(512 * 1024)	/* Reserve 512 kB for malloc()	*/
-
-#define CFG_BOOT_BASE_ADDR	0xf0000000
-#define CFG_SDRAM_BASE		0x00000000	/* _must_ be 0		*/
-#define CFG_FLASH_BASE		0xf8000000	/* start of FLASH	*/
-#define CFG_MONITOR_BASE	TEXT_BASE
-#define CFG_LIME_BASE_0         0xc0000000
-#define CFG_LIME_BASE_1         0xc1000000
-#define CFG_LIME_BASE_2         0xc2000000
-#define CFG_LIME_BASE_3         0xc3000000
-#define CFG_FPGA_BASE_0         0xc4000000
-#define CFG_FPGA_BASE_1         0xc4200000
-#define CFG_OCM_BASE		0xe0010000      /* ocm			*/
-#define CFG_PCI_BASE		0xe0000000      /* Internal PCI regs	*/
-#define CFG_PCI_MEMBASE		0x80000000	/* mapped pci memory	*/
-#define CFG_PCI_MEMBASE1	CFG_PCI_MEMBASE  + 0x10000000
-#define CFG_PCI_MEMBASE2	CFG_PCI_MEMBASE1 + 0x10000000
-#define CFG_PCI_MEMBASE3	CFG_PCI_MEMBASE2 + 0x10000000
+#define CONFIG_SYS_MONITOR_LEN		(512 * 1024)	/* Reserve 512 kB for Monitor	*/
+#define CONFIG_SYS_MALLOC_LEN		(512 * 1024)	/* Reserve 512 kB for malloc()	*/
+
+#define CONFIG_SYS_BOOT_BASE_ADDR	0xf0000000
+#define CONFIG_SYS_SDRAM_BASE		0x00000000	/* _must_ be 0		*/
+#define CONFIG_SYS_FLASH_BASE		0xf8000000	/* start of FLASH	*/
+#define CONFIG_SYS_MONITOR_BASE	TEXT_BASE
+#define CONFIG_SYS_LIME_BASE_0         0xc0000000
+#define CONFIG_SYS_LIME_BASE_1         0xc1000000
+#define CONFIG_SYS_LIME_BASE_2         0xc2000000
+#define CONFIG_SYS_LIME_BASE_3         0xc3000000
+#define CONFIG_SYS_FPGA_BASE_0         0xc4000000
+#define CONFIG_SYS_FPGA_BASE_1         0xc4200000
+#define CONFIG_SYS_OCM_BASE		0xe0010000      /* ocm			*/
+#define CONFIG_SYS_PCI_BASE		0xe0000000      /* Internal PCI regs	*/
+#define CONFIG_SYS_PCI_MEMBASE		0x80000000	/* mapped pci memory	*/
+#define CONFIG_SYS_PCI_MEMBASE1	CONFIG_SYS_PCI_MEMBASE  + 0x10000000
+#define CONFIG_SYS_PCI_MEMBASE2	CONFIG_SYS_PCI_MEMBASE1 + 0x10000000
+#define CONFIG_SYS_PCI_MEMBASE3	CONFIG_SYS_PCI_MEMBASE2 + 0x10000000
 
 /* Don't change either of these */
-#define CFG_PERIPHERAL_BASE	0xef600000	/* internal peripherals	*/
+#define CONFIG_SYS_PERIPHERAL_BASE	0xef600000	/* internal peripherals	*/
 
-#define CFG_USB2D0_BASE		0xe0000100
-#define CFG_USB_DEVICE		0xe0000000
-#define CFG_USB_HOST		0xe0000400
+#define CONFIG_SYS_USB2D0_BASE		0xe0000100
+#define CONFIG_SYS_USB_DEVICE		0xe0000000
+#define CONFIG_SYS_USB_HOST		0xe0000400
 
 /*-----------------------------------------------------------------------
  * Initial RAM & stack pointer
@@ -78,107 +78,107 @@
  * content during reset (GPT0_COMP6). This way we reserve the OCM (16k)
  * for logbuffer only. (GPT0_COMP1-COMP5 are reserved for logbuffer header.)
  */
-#define CFG_INIT_RAM_DCACHE	1		/* d-cache as init ram	*/
-#define CFG_INIT_RAM_ADDR	0x70000000		/* DCache       */
-#define CFG_INIT_RAM_END	(4 << 10)
-#define CFG_GBL_DATA_SIZE	256		/* num bytes initial data*/
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
-#define CFG_POST_ALT_WORD_ADDR	(CFG_PERIPHERAL_BASE + GPT0_COMP6)
+#define CONFIG_SYS_INIT_RAM_DCACHE	1		/* d-cache as init ram	*/
+#define CONFIG_SYS_INIT_RAM_ADDR	0x70000000		/* DCache       */
+#define CONFIG_SYS_INIT_RAM_END	(4 << 10)
+#define CONFIG_SYS_GBL_DATA_SIZE	256		/* num bytes initial data*/
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
+#define CONFIG_SYS_POST_ALT_WORD_ADDR	(CONFIG_SYS_PERIPHERAL_BASE + GPT0_COMP6)
 						/* unused GPT0 COMP reg	*/
-#define CFG_MEM_TOP_HIDE	(4 << 10) /* don't use last 4kbytes	*/
+#define CONFIG_SYS_MEM_TOP_HIDE	(4 << 10) /* don't use last 4kbytes	*/
 					/* 440EPx errata CHIP 11	*/
-#define CFG_OCM_SIZE		(16 << 10)
+#define CONFIG_SYS_OCM_SIZE		(16 << 10)
 
 /* Additional registers for watchdog timer post test */
 
-#define CFG_WATCHDOG_TIME_ADDR	(CFG_PERIPHERAL_BASE + GPT0_MASK2)
-#define CFG_WATCHDOG_FLAGS_ADDR	(CFG_PERIPHERAL_BASE + GPT0_MASK1)
-#define CFG_DSPIC_TEST_ADDR	CFG_WATCHDOG_FLAGS_ADDR
-#define CFG_OCM_STATUS_ADDR	CFG_WATCHDOG_FLAGS_ADDR
-#define CFG_WATCHDOG_MAGIC	0x12480000
-#define CFG_WATCHDOG_MAGIC_MASK	0xFFFF0000
-#define CFG_DSPIC_TEST_MASK	0x00000001
-#define CFG_OCM_STATUS_OK	0x00009A00
-#define CFG_OCM_STATUS_FAIL	0x0000A300
-#define CFG_OCM_STATUS_MASK	0x0000FF00
+#define CONFIG_SYS_WATCHDOG_TIME_ADDR	(CONFIG_SYS_PERIPHERAL_BASE + GPT0_MASK2)
+#define CONFIG_SYS_WATCHDOG_FLAGS_ADDR	(CONFIG_SYS_PERIPHERAL_BASE + GPT0_MASK1)
+#define CONFIG_SYS_DSPIC_TEST_ADDR	CONFIG_SYS_WATCHDOG_FLAGS_ADDR
+#define CONFIG_SYS_OCM_STATUS_ADDR	CONFIG_SYS_WATCHDOG_FLAGS_ADDR
+#define CONFIG_SYS_WATCHDOG_MAGIC	0x12480000
+#define CONFIG_SYS_WATCHDOG_MAGIC_MASK	0xFFFF0000
+#define CONFIG_SYS_DSPIC_TEST_MASK	0x00000001
+#define CONFIG_SYS_OCM_STATUS_OK	0x00009A00
+#define CONFIG_SYS_OCM_STATUS_FAIL	0x0000A300
+#define CONFIG_SYS_OCM_STATUS_MASK	0x0000FF00
 
 /*-----------------------------------------------------------------------
  * Serial Port
  *----------------------------------------------------------------------*/
-#undef CFG_EXT_SERIAL_CLOCK		/* no external clock provided	*/
+#undef CONFIG_SYS_EXT_SERIAL_CLOCK		/* no external clock provided	*/
 #define CONFIG_BAUDRATE		115200
 #define CONFIG_SERIAL_MULTI     1
 /* define this if you want console on UART1 */
 #define CONFIG_UART1_CONSOLE	1	/* use UART1 as console		*/
 
-#define CFG_BAUDRATE_TABLE						\
+#define CONFIG_SYS_BAUDRATE_TABLE						\
 	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
 
 /*-----------------------------------------------------------------------
  * Environment
  *----------------------------------------------------------------------*/
-#define CFG_ENV_IS_IN_FLASH     1	/* use FLASH for environment vars	*/
+#define CONFIG_ENV_IS_IN_FLASH     1	/* use FLASH for environment vars	*/
 
 /*-----------------------------------------------------------------------
  * FLASH related
  *----------------------------------------------------------------------*/
-#define CFG_FLASH_CFI				/* The flash is CFI compatible	*/
+#define CONFIG_SYS_FLASH_CFI				/* The flash is CFI compatible	*/
 #define CONFIG_FLASH_CFI_DRIVER			/* Use common CFI driver	*/
 
-#define CFG_FLASH0		0xFC000000
-#define CFG_FLASH1		0xF8000000
-#define CFG_FLASH_BANKS_LIST	{ CFG_FLASH1, CFG_FLASH0 }
+#define CONFIG_SYS_FLASH0		0xFC000000
+#define CONFIG_SYS_FLASH1		0xF8000000
+#define CONFIG_SYS_FLASH_BANKS_LIST	{ CONFIG_SYS_FLASH1, CONFIG_SYS_FLASH0 }
 
-#define CFG_MAX_FLASH_BANKS	2	/* max number of memory banks		*/
-#define CFG_MAX_FLASH_SECT	512	/* max number of sectors on one chip	*/
+#define CONFIG_SYS_MAX_FLASH_BANKS	2	/* max number of memory banks		*/
+#define CONFIG_SYS_MAX_FLASH_SECT	512	/* max number of sectors on one chip	*/
 
-#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
-#define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
+#define CONFIG_SYS_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
+#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
 
-#define CFG_FLASH_USE_BUFFER_WRITE 1	/* use buffered writes (20x faster)	*/
-#define CFG_FLASH_PROTECTION	1	/* use hardware flash protection	*/
+#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1	/* use buffered writes (20x faster)	*/
+#define CONFIG_SYS_FLASH_PROTECTION	1	/* use hardware flash protection	*/
 
-#define CFG_FLASH_EMPTY_INFO		/* print 'E' for empty sector on flinfo */
-#define CFG_FLASH_QUIET_TEST	1	/* don't warn upon unknown flash	*/
+#define CONFIG_SYS_FLASH_EMPTY_INFO		/* print 'E' for empty sector on flinfo */
+#define CONFIG_SYS_FLASH_QUIET_TEST	1	/* don't warn upon unknown flash	*/
 
-#define CFG_ENV_SECT_SIZE	0x40000	/* size of one complete sector		*/
-#define CFG_ENV_ADDR		((-CFG_MONITOR_LEN)-CFG_ENV_SECT_SIZE)
-#define	CFG_ENV_SIZE		0x2000	/* Total Size of Environment Sector	*/
+#define CONFIG_ENV_SECT_SIZE	0x40000	/* size of one complete sector		*/
+#define CONFIG_ENV_ADDR		((-CONFIG_SYS_MONITOR_LEN)-CONFIG_ENV_SECT_SIZE)
+#define	CONFIG_ENV_SIZE		0x2000	/* Total Size of Environment Sector	*/
 
 /* Address and size of Redundant Environment Sector	*/
-#define CFG_ENV_ADDR_REDUND	(CFG_ENV_ADDR-CFG_ENV_SECT_SIZE)
-#define CFG_ENV_SIZE_REDUND	(CFG_ENV_SIZE)
+#define CONFIG_ENV_ADDR_REDUND	(CONFIG_ENV_ADDR-CONFIG_ENV_SECT_SIZE)
+#define CONFIG_ENV_SIZE_REDUND	(CONFIG_ENV_SIZE)
 
 /*-----------------------------------------------------------------------
  * DDR SDRAM
  *----------------------------------------------------------------------*/
-#define CFG_MBYTES_SDRAM	(256)		/* 256MB			*/
-#define CFG_DDR_CACHED_ADDR	0x40000000	/* setup 2nd TLB cached here	*/
+#define CONFIG_SYS_MBYTES_SDRAM	(256)		/* 256MB			*/
+#define CONFIG_SYS_DDR_CACHED_ADDR	0x40000000	/* setup 2nd TLB cached here	*/
 #define CONFIG_DDR_DATA_EYE	1		/* use DDR2 optimization	*/
 #define CONFIG_DDR_ECC		1		/* enable ECC			*/
-#define CFG_POST_ECC_ON		CFG_POST_ECC
+#define CONFIG_SYS_POST_ECC_ON		CONFIG_SYS_POST_ECC
 
 /* POST support */
-#define CONFIG_POST		(CFG_POST_CACHE    | \
-				 CFG_POST_CPU	   | \
-				 CFG_POST_ECC_ON   | \
-				 CFG_POST_ETHER	   | \
-				 CFG_POST_FPU	   | \
-				 CFG_POST_I2C	   | \
-				 CFG_POST_MEMORY   | \
-				 CFG_POST_OCM      | \
-				 CFG_POST_RTC      | \
-				 CFG_POST_SPR      | \
-				 CFG_POST_UART     | \
-				 CFG_POST_SYSMON   | \
-				 CFG_POST_WATCHDOG | \
-				 CFG_POST_DSP      | \
-				 CFG_POST_BSPEC1   | \
-				 CFG_POST_BSPEC2   | \
-				 CFG_POST_BSPEC3   | \
-				 CFG_POST_BSPEC4   | \
-				 CFG_POST_BSPEC5)
+#define CONFIG_POST		(CONFIG_SYS_POST_CACHE    | \
+				 CONFIG_SYS_POST_CPU	   | \
+				 CONFIG_SYS_POST_ECC_ON   | \
+				 CONFIG_SYS_POST_ETHER	   | \
+				 CONFIG_SYS_POST_FPU	   | \
+				 CONFIG_SYS_POST_I2C	   | \
+				 CONFIG_SYS_POST_MEMORY   | \
+				 CONFIG_SYS_POST_OCM      | \
+				 CONFIG_SYS_POST_RTC      | \
+				 CONFIG_SYS_POST_SPR      | \
+				 CONFIG_SYS_POST_UART     | \
+				 CONFIG_SYS_POST_SYSMON   | \
+				 CONFIG_SYS_POST_WATCHDOG | \
+				 CONFIG_SYS_POST_DSP      | \
+				 CONFIG_SYS_POST_BSPEC1   | \
+				 CONFIG_SYS_POST_BSPEC2   | \
+				 CONFIG_SYS_POST_BSPEC3   | \
+				 CONFIG_SYS_POST_BSPEC4   | \
+				 CONFIG_SYS_POST_BSPEC5)
 
 #define CONFIG_POST_WATCHDOG  {\
 	"Watchdog timer test",				\
@@ -188,7 +188,7 @@
 	&lwmon5_watchdog_post_test,			\
 	NULL,						\
 	NULL,						\
-	CFG_POST_WATCHDOG				\
+	CONFIG_SYS_POST_WATCHDOG				\
 	}
 
 #define CONFIG_POST_BSPEC1    {\
@@ -199,7 +199,7 @@
 	&dspic_init_post_test,				\
 	NULL,						\
 	NULL,						\
-	CFG_POST_BSPEC1					\
+	CONFIG_SYS_POST_BSPEC1					\
 	}
 
 #define CONFIG_POST_BSPEC2    {\
@@ -210,7 +210,7 @@
 	&dspic_post_test,				\
 	NULL,						\
 	NULL,						\
-	CFG_POST_BSPEC2					\
+	CONFIG_SYS_POST_BSPEC2					\
 	}
 
 #define CONFIG_POST_BSPEC3    {\
@@ -221,7 +221,7 @@
 	&fpga_post_test,				\
 	NULL,						\
 	NULL,						\
-	CFG_POST_BSPEC3					\
+	CONFIG_SYS_POST_BSPEC3					\
 	}
 
 #define CONFIG_POST_BSPEC4    {\
@@ -232,7 +232,7 @@
 	&gdc_post_test,					\
 	NULL,						\
 	NULL,						\
-	CFG_POST_BSPEC4					\
+	CONFIG_SYS_POST_BSPEC4					\
 	}
 
 #define CONFIG_POST_BSPEC5    {\
@@ -243,36 +243,35 @@
 	&sysmon1_post_test,				\
 	NULL,						\
 	NULL,						\
-	CFG_POST_BSPEC5					\
+	CONFIG_SYS_POST_BSPEC5					\
 	}
 
-#define CFG_POST_CACHE_ADDR	0x7fff0000 /* free virtual address	*/
+#define CONFIG_SYS_POST_CACHE_ADDR	0x7fff0000 /* free virtual address	*/
 #define CONFIG_LOGBUFFER
 /* Reserve GPT0_COMP1-COMP5 for logbuffer header */
-#define CONFIG_ALT_LH_ADDR	(CFG_PERIPHERAL_BASE + GPT0_COMP1)
-#define CONFIG_ALT_LB_ADDR	(CFG_OCM_BASE)
-#define CFG_CONSOLE_IS_IN_ENV /* Otherwise it catches logbuffer as output */
+#define CONFIG_ALT_LH_ADDR	(CONFIG_SYS_PERIPHERAL_BASE + GPT0_COMP1)
+#define CONFIG_ALT_LB_ADDR	(CONFIG_SYS_OCM_BASE)
+#define CONFIG_SYS_CONSOLE_IS_IN_ENV /* Otherwise it catches logbuffer as output */
 
 /*-----------------------------------------------------------------------
  * I2C
  *----------------------------------------------------------------------*/
 #define CONFIG_HARD_I2C		1		/* I2C with hardware support	*/
 #undef	CONFIG_SOFT_I2C				/* I2C bit-banged		*/
-#define CFG_I2C_SPEED		100000		/* I2C speed and slave address	*/
-#define CFG_I2C_SLAVE		0x7F
+#define CONFIG_SYS_I2C_SPEED		100000		/* I2C speed and slave address	*/
+#define CONFIG_SYS_I2C_SLAVE		0x7F
 
-#define CFG_I2C_EEPROM_ADDR	0x53	/* EEPROM AT24C128		*/
-#define CFG_I2C_EEPROM_ADDR_LEN 2	/* Bytes of address		*/
-#define CFG_EEPROM_PAGE_WRITE_BITS 6	/* The Atmel AT24C128 has	*/
+#define CONFIG_SYS_I2C_EEPROM_ADDR	0x53	/* EEPROM AT24C128		*/
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2	/* Bytes of address		*/
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 6	/* The Atmel AT24C128 has	*/
 					/* 64 byte page write mode using*/
 					/* last 6 bits of the address	*/
-#define CFG_EEPROM_PAGE_WRITE_DELAY_MS	10   /* and takes up to 10 msec */
-#define CFG_EEPROM_PAGE_WRITE_ENABLE
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	10   /* and takes up to 10 msec */
 
 #define CONFIG_RTC_PCF8563	1		/* enable Philips PCF8563 RTC	*/
-#define CFG_I2C_RTC_ADDR	0x51		/* Philips PCF8563 RTC address	*/
-#define CFG_I2C_KEYBD_ADDR	0x56		/* PIC LWE keyboard		*/
-#define CFG_I2C_DSPIC_IO_ADDR	0x57		/* PIC I/O addr               */
+#define CONFIG_SYS_I2C_RTC_ADDR	0x51		/* Philips PCF8563 RTC address	*/
+#define CONFIG_SYS_I2C_KEYBD_ADDR	0x56		/* PIC LWE keyboard		*/
+#define CONFIG_SYS_I2C_DSPIC_IO_ADDR	0x57		/* PIC I/O addr               */
 
 #define	CONFIG_POST_KEY_MAGIC	"3C+3E"	/* press F3 + F5 keys to force POST */
 #if 0
@@ -325,8 +324,9 @@
 #endif
 
 #define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
-#define CFG_LOADS_BAUD_CHANGE	1	/* allow baudrate change	*/
+#define CONFIG_SYS_LOADS_BAUD_CHANGE	1	/* allow baudrate change	*/
 
+#define CONFIG_PPC4xx_EMAC
 #define	CONFIG_IBM_EMAC4_V4	1
 #define CONFIG_MII		1	/* MII PHY management		*/
 #define CONFIG_PHY_ADDR		3	/* PHY address, See schematics	*/
@@ -335,7 +335,7 @@
 #define CONFIG_PHY_RESET_DELAY	300
 
 #define CONFIG_HAS_ETH0
-#define CFG_RX_ETH_BUFFER	32	/* Number of ethernet rx buffers & descriptors */
+#define CONFIG_SYS_RX_ETH_BUFFER	32	/* Number of ethernet rx buffers & descriptors */
 
 #define CONFIG_NET_MULTI	1
 #define CONFIG_HAS_ETH1		1	/* add support for "eth1addr"	*/
@@ -412,30 +412,30 @@
  *----------------------------------------------------------------------*/
 #define CONFIG_SUPPORT_VFAT
 
-#define CFG_LONGHELP			/* undef to save memory		*/
-#define CFG_PROMPT	        "=> "	/* Monitor Command Prompt	*/
+#define CONFIG_SYS_LONGHELP			/* undef to save memory		*/
+#define CONFIG_SYS_PROMPT	        "=> "	/* Monitor Command Prompt	*/
 
-#define CFG_HUSH_PARSER		1	/* Use the HUSH parser		*/
-#ifdef	CFG_HUSH_PARSER
-#define	CFG_PROMPT_HUSH_PS2	"> "
+#define CONFIG_SYS_HUSH_PARSER		1	/* Use the HUSH parser		*/
+#ifdef	CONFIG_SYS_HUSH_PARSER
+#define	CONFIG_SYS_PROMPT_HUSH_PS2	"> "
 #endif
 
 #if defined(CONFIG_CMD_KGDB)
-#define CFG_CBSIZE	        1024	/* Console I/O Buffer Size	*/
+#define CONFIG_SYS_CBSIZE	        1024	/* Console I/O Buffer Size	*/
 #else
-#define CFG_CBSIZE	        256	/* Console I/O Buffer Size	*/
+#define CONFIG_SYS_CBSIZE	        256	/* Console I/O Buffer Size	*/
 #endif
-#define CFG_PBSIZE              (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define CFG_MAXARGS	        16	/* max number of command args	*/
-#define CFG_BARGSIZE	        CFG_CBSIZE /* Boot Argument Buffer Size	*/
+#define CONFIG_SYS_PBSIZE              (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS	        16	/* max number of command args	*/
+#define CONFIG_SYS_BARGSIZE	        CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size	*/
 
-#define CFG_MEMTEST_START	0x0400000 /* memtest works on		*/
-#define CFG_MEMTEST_END		0x0C00000 /* 4 ... 12 MB in DRAM	*/
+#define CONFIG_SYS_MEMTEST_START	0x0400000 /* memtest works on		*/
+#define CONFIG_SYS_MEMTEST_END		0x0C00000 /* 4 ... 12 MB in DRAM	*/
 
-#define CFG_LOAD_ADDR		0x100000  /* default load address	*/
-#define CFG_EXTBDINFO		1	/* To use extended board_into (bd_t) */
+#define CONFIG_SYS_LOAD_ADDR		0x100000  /* default load address	*/
+#define CONFIG_SYS_EXTBDINFO		1	/* To use extended board_into (bd_t) */
 
-#define CFG_HZ		        1000	/* decrementer freq: 1 ms ticks	*/
+#define CONFIG_SYS_HZ		        1000	/* decrementer freq: 1 ms ticks	*/
 
 #define CONFIG_CMDLINE_EDITING	1	/* add command line history	*/
 #define CONFIG_LOOPW            1       /* enable loopw command         */
@@ -449,14 +449,14 @@
 #define CONFIG_PCI			/* include pci support	        */
 #undef CONFIG_PCI_PNP			/* do (not) pci plug-and-play   */
 #define CONFIG_PCI_SCAN_SHOW		/* show pci devices on startup  */
-#define CFG_PCI_TARGBASE        0x80000000 /* PCIaddr mapped to CFG_PCI_MEMBASE*/
+#define CONFIG_SYS_PCI_TARGBASE        0x80000000 /* PCIaddr mapped to CONFIG_SYS_PCI_MEMBASE*/
 
 /* Board-specific PCI */
-#define CFG_PCI_TARGET_INIT
-#define CFG_PCI_MASTER_INIT
+#define CONFIG_SYS_PCI_TARGET_INIT
+#define CONFIG_SYS_PCI_MASTER_INIT
 
-#define CFG_PCI_SUBSYS_VENDORID 0x10e8	/* AMCC				*/
-#define CFG_PCI_SUBSYS_ID       0xcafe	/* Whatever			*/
+#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x10e8	/* AMCC				*/
+#define CONFIG_SYS_PCI_SUBSYS_ID       0xcafe	/* Whatever			*/
 
 #define CONFIG_HW_WATCHDOG	1	/* Use external HW-Watchdog	*/
 #define CONFIG_WD_PERIOD	40000	/* in usec */
@@ -467,74 +467,74 @@
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
+#define CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
 
 /*-----------------------------------------------------------------------
  * External Bus Controller (EBC) Setup
  *----------------------------------------------------------------------*/
-#define CFG_FLASH		CFG_FLASH_BASE
+#define CONFIG_SYS_FLASH		CONFIG_SYS_FLASH_BASE
 
 /* Memory Bank 0 (NOR-FLASH) initialization					*/
-#define CFG_EBC_PB0AP		0x03050200
-#define CFG_EBC_PB0CR		(CFG_FLASH | 0xfc000)
+#define CONFIG_SYS_EBC_PB0AP		0x03050200
+#define CONFIG_SYS_EBC_PB0CR		(CONFIG_SYS_FLASH | 0xfc000)
 
 /* Memory Bank 1 (Lime) initialization						*/
-#define CFG_EBC_PB1AP		0x01004380
-#define CFG_EBC_PB1CR		(CFG_LIME_BASE_0 | 0xdc000)
+#define CONFIG_SYS_EBC_PB1AP		0x01004380
+#define CONFIG_SYS_EBC_PB1CR		(CONFIG_SYS_LIME_BASE_0 | 0xdc000)
 
 /* Memory Bank 2 (FPGA) initialization						*/
-#define CFG_EBC_PB2AP		0x01004400
-#define CFG_EBC_PB2CR		(CFG_FPGA_BASE_0 | 0x1c000)
+#define CONFIG_SYS_EBC_PB2AP		0x01004400
+#define CONFIG_SYS_EBC_PB2CR		(CONFIG_SYS_FPGA_BASE_0 | 0x1c000)
 
 /* Memory Bank 3 (FPGA2) initialization						*/
-#define CFG_EBC_PB3AP		0x01004400
-#define CFG_EBC_PB3CR		(CFG_FPGA_BASE_1 | 0x1c000)
+#define CONFIG_SYS_EBC_PB3AP		0x01004400
+#define CONFIG_SYS_EBC_PB3CR		(CONFIG_SYS_FPGA_BASE_1 | 0x1c000)
 
-#define CFG_EBC_CFG		0xb8400000
+#define CONFIG_SYS_EBC_CFG		0xb8400000
 
 /*-----------------------------------------------------------------------
  * Graphics (Fujitsu Lime)
  *----------------------------------------------------------------------*/
 /* SDRAM Clock frequency adjustment register */
-#define CFG_LIME_SDRAM_CLOCK	0xC1FC0038
+#define CONFIG_SYS_LIME_SDRAM_CLOCK	0xC1FC0038
 /* Lime Clock frequency is to set 100MHz */
-#define CFG_LIME_CLOCK_100MHZ	0x00000
+#define CONFIG_SYS_LIME_CLOCK_100MHZ	0x00000
 #if 0
 /* Lime Clock frequency for 133MHz */
-#define CFG_LIME_CLOCK_133MHZ	0x10000
+#define CONFIG_SYS_LIME_CLOCK_133MHZ	0x10000
 #endif
 
 /* SDRAM Parameter register */
-#define CFG_LIME_MMR		0xC1FCFFFC
+#define CONFIG_SYS_LIME_MMR		0xC1FCFFFC
 /* SDRAM parameter value; was 0x414FB7F2, caused several vertical bars
    and pixel flare on display when 133MHz was configured. According to
    SDRAM chip datasheet CAS Latency is 3 for 133MHz and -75 Speed Grade */
-#ifdef CFG_LIME_CLOCK_133MHZ
-#define CFG_LIME_MMR_VALUE	0x414FB7F3
+#ifdef CONFIG_SYS_LIME_CLOCK_133MHZ
+#define CONFIG_SYS_LIME_MMR_VALUE	0x414FB7F3
 #else
-#define CFG_LIME_MMR_VALUE	0x414FB7F2
+#define CONFIG_SYS_LIME_MMR_VALUE	0x414FB7F2
 #endif
 
 /*-----------------------------------------------------------------------
  * GPIO Setup
  *----------------------------------------------------------------------*/
-#define CFG_GPIO_PHY1_RST	12
-#define CFG_GPIO_FLASH_WP	14
-#define CFG_GPIO_PHY0_RST	22
-#define CFG_GPIO_DSPIC_READY	51
-#define CFG_GPIO_EEPROM_EXT_WP	55
-#define CFG_GPIO_HIGHSIDE	56
-#define CFG_GPIO_EEPROM_INT_WP	57
-#define CFG_GPIO_BOARD_RESET	58
-#define CFG_GPIO_LIME_S		59
-#define CFG_GPIO_LIME_RST	60
-#define CFG_GPIO_SYSMON_STATUS	62
-#define CFG_GPIO_WATCHDOG	63
+#define CONFIG_SYS_GPIO_PHY1_RST	12
+#define CONFIG_SYS_GPIO_FLASH_WP	14
+#define CONFIG_SYS_GPIO_PHY0_RST	22
+#define CONFIG_SYS_GPIO_DSPIC_READY	51
+#define CONFIG_SYS_GPIO_EEPROM_EXT_WP	55
+#define CONFIG_SYS_GPIO_HIGHSIDE	56
+#define CONFIG_SYS_GPIO_EEPROM_INT_WP	57
+#define CONFIG_SYS_GPIO_BOARD_RESET	58
+#define CONFIG_SYS_GPIO_LIME_S		59
+#define CONFIG_SYS_GPIO_LIME_RST	60
+#define CONFIG_SYS_GPIO_SYSMON_STATUS	62
+#define CONFIG_SYS_GPIO_WATCHDOG	63
 
 /*-----------------------------------------------------------------------
  * PPC440 GPIO Configuration
  */
-#define CFG_4xx_GPIO_TABLE { /*	  Out		  GPIO	Alternate1	Alternate2	Alternate3 */ \
+#define CONFIG_SYS_4xx_GPIO_TABLE { /*	  Out		  GPIO	Alternate1	Alternate2	Alternate3 */ \
 {											\
 /* GPIO Core 0 */									\
 {GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO0	EBC_ADDR(7)	DMA_REQ(2)	*/	\
diff --git a/include/configs/m501sk.h b/include/configs/m501sk.h
index bc94cf4a3..f09214dce 100644
--- a/include/configs/m501sk.h
+++ b/include/configs/m501sk.h
@@ -45,31 +45,31 @@
 /*
  * Size of malloc() pool
  */
-#define CFG_MALLOC_LEN		(CFG_ENV_SIZE + 128*1024)
-#define CFG_GBL_DATA_SIZE	128	/* Bytes reserved for initial data */
+#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + 128*1024)
+#define CONFIG_SYS_GBL_DATA_SIZE	128	/* Bytes reserved for initial data */
 
 #define CONFIG_BAUDRATE			115200
 
 /* Hardcode so no __divsi3 : AT91C_MASTER_CLOCK / baudrate / 16 */
-#define CFG_AT91C_BRGR_DIVISOR	33
+#define CONFIG_SYS_AT91C_BRGR_DIVISOR	33
 
 /*
  * Hardware drivers
  */
-#define CFG_FLASH_CFI		1
+#define CONFIG_SYS_FLASH_CFI		1
 #define CONFIG_FLASH_CFI_DRIVER	1
-#define CFG_ENV_SECT_SIZE	0x20000
-#define CFG_FLASH_USE_BUFFER_WRITE
-#define CFG_FLASH_PROTECTION	/*for Intel P30 Flash*/
+#define CONFIG_ENV_SECT_SIZE	0x20000
+#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
+#define CONFIG_SYS_FLASH_PROTECTION	/*for Intel P30 Flash*/
 #define CONFIG_HARD_I2C
-#define CFG_I2C_SPEED		100
-#define CFG_I2C_SLAVE		0
-#define CFG_CONSOLE_INFO_QUIET
-#undef CFG_ENV_IS_IN_EEPROM
-#define CFG_I2C_EEPROM_ADDR	0x50
-#define CFG_I2C_EEPROM_ADDR_LEN	1
-#define CFG_EEPROM_AT24C16
-#define CFG_I2C_RTC_ADDR		0x32
+#define CONFIG_SYS_I2C_SPEED		100
+#define CONFIG_SYS_I2C_SLAVE		0
+#define CONFIG_SYS_CONSOLE_INFO_QUIET
+#undef CONFIG_ENV_IS_IN_EEPROM
+#define CONFIG_SYS_I2C_EEPROM_ADDR	0x50
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN	1
+#define CONFIG_SYS_EEPROM_AT24C16
+#define CONFIG_SYS_I2C_RTC_ADDR		0x32
 #undef CONFIG_RTC_DS1338
 #define CONFIG_RTC_RS5C372A
 #undef CONFIG_POST
@@ -123,11 +123,11 @@
 #define CONFIG_CMD_FLASH
 #define CONFIG_CMD_ENV
 
-#define CFG_HUSH_PARSER
+#define CONFIG_SYS_HUSH_PARSER
 #define CONFIG_AUTO_COMPLETE
-#define CFG_PROMPT_HUSH_PS2	    ">>"
+#define CONFIG_SYS_PROMPT_HUSH_PS2	    ">>"
 
-#define CFG_MAX_NAND_DEVICE	0 /* Max number of NAND devices */
+#define CONFIG_SYS_MAX_NAND_DEVICE	0 /* Max number of NAND devices */
 #define SECTORSIZE			     512
 
 #define ADDR_COLUMN		1
@@ -138,9 +138,9 @@
 #define PHYS_SDRAM		0x20000000
 #define PHYS_SDRAM_SIZE	0x2000000 /* 32 megs */
 
-#define CFG_MEMTEST_START	0x21000000 /* PHYS_SDRAM */
-/* CFG_MEMTEST_START + PHYS_SDRAM_SIZE - 262144 */
-#define CFG_MEMTEST_END	0x00100000
+#define CONFIG_SYS_MEMTEST_START	0x21000000 /* PHYS_SDRAM */
+/* CONFIG_SYS_MEMTEST_START + PHYS_SDRAM_SIZE - 262144 */
+#define CONFIG_SYS_MEMTEST_END	0x00100000
 
 #define CONFIG_DRIVER_ETHER
 #define CONFIG_NET_RETRY_COUNT	20
@@ -148,44 +148,44 @@
 
 #define PHYS_FLASH_1		0x10000000
 #define PHYS_FLASH_SIZE	0x800000 /* 8 megs main flash */
-#define CFG_FLASH_BASE		PHYS_FLASH_1
-#define CFG_MAX_FLASH_BANKS	1
-#define CFG_MAX_FLASH_SECT	256
-#define CFG_FLASH_ERASE_TOUT	(2*CFG_HZ) /* Timeout for Flash Erase */
-#define CFG_FLASH_WRITE_TOUT	(2*CFG_HZ) /* Timeout for Flash Write */
-
-#ifdef CFG_ENV_IS_IN_DATAFLASH
-#define CFG_ENV_OFFSET		0x20000
-#define CFG_ENV_ADDR		(CFG_DATAFLASH_LOGIC_ADDR_CS0 + CFG_ENV_OFFSET)
-#define CFG_ENV_SIZE		0x2000
+#define CONFIG_SYS_FLASH_BASE		PHYS_FLASH_1
+#define CONFIG_SYS_MAX_FLASH_BANKS	1
+#define CONFIG_SYS_MAX_FLASH_SECT	256
+#define CONFIG_SYS_FLASH_ERASE_TOUT	(2*CONFIG_SYS_HZ) /* Timeout for Flash Erase */
+#define CONFIG_SYS_FLASH_WRITE_TOUT	(2*CONFIG_SYS_HZ) /* Timeout for Flash Write */
+
+#ifdef CONFIG_ENV_IS_IN_DATAFLASH
+#define CONFIG_ENV_OFFSET		0x20000
+#define CONFIG_ENV_ADDR		(CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 + CONFIG_ENV_OFFSET)
+#define CONFIG_ENV_SIZE		0x2000
 #else
-#define CFG_ENV_IS_IN_FLASH
-#define CFG_ENV_ADDR		(PHYS_FLASH_1 + 0x00020000)
-#define CFG_ENV_SIZE		2048
+#define CONFIG_ENV_IS_IN_FLASH
+#define CONFIG_ENV_ADDR		(PHYS_FLASH_1 + 0x00020000)
+#define CONFIG_ENV_SIZE		2048
 #endif
 
-#ifdef CFG_ENV_IS_IN_EEPROM
-#define CFG_ENV_OFFSET		1024
-#define CFG_ENV_SIZE		1024
+#ifdef CONFIG_ENV_IS_IN_EEPROM
+#define CONFIG_ENV_OFFSET		1024
+#define CONFIG_ENV_SIZE		1024
 #endif
 
-#define CFG_LOAD_ADDR		0x21000000 /* default load address */
+#define CONFIG_SYS_LOAD_ADDR		0x21000000 /* default load address */
 
 /* use for protect flash sectors */
-#define CFG_BOOT_SIZE		0x6000 /* 24 KBytes */
-#define CFG_U_BOOT_BASE	(PHYS_FLASH_1 + 0x10000)
-#define CFG_U_BOOT_SIZE	0x10000 /* 64 KBytes */
+#define CONFIG_SYS_BOOT_SIZE		0x6000 /* 24 KBytes */
+#define CONFIG_SYS_U_BOOT_BASE	(PHYS_FLASH_1 + 0x10000)
+#define CONFIG_SYS_U_BOOT_SIZE	0x10000 /* 64 KBytes */
 
-#define CFG_BAUDRATE_TABLE	{ 115200 , 19200, 38400, 57600, 9600 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 115200 , 19200, 38400, 57600, 9600 }
 
-#define CFG_PROMPT		"U-Boot> " /* Monitor Command Prompt */
-#define CFG_CBSIZE		512 /* Console I/O Buffer Size */
-#define CFG_MAXARGS		16 /* max number of command args */
+#define CONFIG_SYS_PROMPT		"U-Boot> " /* Monitor Command Prompt */
+#define CONFIG_SYS_CBSIZE		512 /* Console I/O Buffer Size */
+#define CONFIG_SYS_MAXARGS		16 /* max number of command args */
 /* Print Buffer Size */
-#define CFG_PBSIZE		(CFG_CBSIZE+sizeof(CFG_PROMPT)+16)
+#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
 
-#define CFG_HZ 1000
-#define CFG_HZ_CLOCK		AT91C_MASTER_CLOCK/2
+#define CONFIG_SYS_HZ 1000
+#define CONFIG_SYS_HZ_CLOCK		AT91C_MASTER_CLOCK/2
 
 #define CONFIG_STACKSIZE	(32*1024) /* regular stack */
 
diff --git a/include/configs/makalu.h b/include/configs/makalu.h
index cfc6fdc3e..52339f9c6 100644
--- a/include/configs/makalu.h
+++ b/include/configs/makalu.h
@@ -53,9 +53,9 @@
  * Base addresses -- Note these are effective addresses where the
  * actual resources get mapped (not physical addresses)
  *----------------------------------------------------------------------*/
-#define CFG_FLASH_BASE		0xFC000000
-#define CFG_FPGA_BASE		0xF0000000
-#define CFG_PERIPHERAL_BASE	0xEF600000      /* internal peripherals*/
+#define CONFIG_SYS_FLASH_BASE		0xFC000000
+#define CONFIG_SYS_FPGA_BASE		0xF0000000
+#define CONFIG_SYS_PERIPHERAL_BASE	0xEF600000      /* internal peripherals*/
 
 /*-----------------------------------------------------------------------
  * Initial RAM & Stack Pointer Configuration Options
@@ -71,25 +71,25 @@
  *   the latter of which is less than desireable since it requires
  *   setting up the SDRAM and ECC in assembly code.
  *
- *   To use (2), define 'CFG_INIT_DCACHE_CS' to be an unused chip
+ *   To use (2), define 'CONFIG_SYS_INIT_DCACHE_CS' to be an unused chip
  *   select on the External Bus Controller (EBC) and then select a
- *   value for 'CFG_INIT_RAM_ADDR' outside of the range of valid,
- *   physical SDRAM. Otherwise, undefine 'CFG_INIT_DCACHE_CS' and
- *   select a value for 'CFG_INIT_RAM_ADDR' within the range of valid,
+ *   value for 'CONFIG_SYS_INIT_RAM_ADDR' outside of the range of valid,
+ *   physical SDRAM. Otherwise, undefine 'CONFIG_SYS_INIT_DCACHE_CS' and
+ *   select a value for 'CONFIG_SYS_INIT_RAM_ADDR' within the range of valid,
  *   physical SDRAM to use (3).
  *-----------------------------------------------------------------------*/
 
-#define CFG_INIT_DCACHE_CS	4
+#define CONFIG_SYS_INIT_DCACHE_CS	4
 
-#if defined(CFG_INIT_DCACHE_CS)
-#define CFG_INIT_RAM_ADDR	(CFG_SDRAM_BASE + ( 1 << 30))	/*  1 GiB */
+#if defined(CONFIG_SYS_INIT_DCACHE_CS)
+#define CONFIG_SYS_INIT_RAM_ADDR	(CONFIG_SYS_SDRAM_BASE + ( 1 << 30))	/*  1 GiB */
 #else
-#define CFG_INIT_RAM_ADDR	(CFG_SDRAM_BASE + (32 << 20))	/* 32 MiB */
-#endif /* defined(CFG_INIT_DCACHE_CS) */
+#define CONFIG_SYS_INIT_RAM_ADDR	(CONFIG_SYS_SDRAM_BASE + (32 << 20))	/* 32 MiB */
+#endif /* defined(CONFIG_SYS_INIT_DCACHE_CS) */
 
-#define CFG_INIT_RAM_END        (4 << 10)			/*  4 KiB */
-#define CFG_GBL_DATA_SIZE	256		/* num bytes initial data */
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_RAM_END        (4 << 10)			/*  4 KiB */
+#define CONFIG_SYS_GBL_DATA_SIZE	256		/* num bytes initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
 
 /*
  * If the data cache is being used for the primordial stack and global
@@ -99,124 +99,124 @@
  * for the POST word.
  */
 
-#if defined(CFG_INIT_DCACHE_CS)
-# define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
-# define CFG_POST_ALT_WORD_ADDR	(CFG_PERIPHERAL_BASE + GPT0_COMP6)
+#if defined(CONFIG_SYS_INIT_DCACHE_CS)
+# define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
+# define CONFIG_SYS_POST_ALT_WORD_ADDR	(CONFIG_SYS_PERIPHERAL_BASE + GPT0_COMP6)
 #else
-# define CFG_INIT_EXTRA_SIZE	16
-# define CFG_INIT_SP_OFFSET	(CFG_GBL_DATA_OFFSET - CFG_INIT_EXTRA_SIZE)
-# define CFG_POST_WORD_ADDR	(CFG_GBL_DATA_OFFSET - 4)
-# define CFG_OCM_DATA_ADDR	CFG_INIT_RAM_ADDR
-#endif /* defined(CFG_INIT_DCACHE_CS) */
+# define CONFIG_SYS_INIT_EXTRA_SIZE	16
+# define CONFIG_SYS_INIT_SP_OFFSET	(CONFIG_SYS_GBL_DATA_OFFSET - CONFIG_SYS_INIT_EXTRA_SIZE)
+# define CONFIG_SYS_POST_WORD_ADDR	(CONFIG_SYS_GBL_DATA_OFFSET - 4)
+# define CONFIG_SYS_OCM_DATA_ADDR	CONFIG_SYS_INIT_RAM_ADDR
+#endif /* defined(CONFIG_SYS_INIT_DCACHE_CS) */
 
 /*-----------------------------------------------------------------------
  * Serial Port
  *----------------------------------------------------------------------*/
-#undef CFG_EXT_SERIAL_CLOCK			/* no ext. clk		*/
+#undef CONFIG_SYS_EXT_SERIAL_CLOCK			/* no ext. clk		*/
 /* define this if you want console on UART1 */
 #undef CONFIG_UART1_CONSOLE
 
 /*-----------------------------------------------------------------------
  * Environment
  *----------------------------------------------------------------------*/
-#define CFG_ENV_IS_IN_FLASH     1	/* use FLASH for environment vars	*/
+#define CONFIG_ENV_IS_IN_FLASH     1	/* use FLASH for environment vars	*/
 
 /*-----------------------------------------------------------------------
  * FLASH related
  *----------------------------------------------------------------------*/
-#define CFG_FLASH_CFI			/* The flash is CFI compatible	*/
+#define CONFIG_SYS_FLASH_CFI			/* The flash is CFI compatible	*/
 #define CONFIG_FLASH_CFI_DRIVER		/* Use common CFI driver	*/
 
-#define CFG_FLASH_BANKS_LIST    {CFG_FLASH_BASE}
-#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
-#define CFG_MAX_FLASH_SECT	512	/* max number of sectors on one chip	*/
+#define CONFIG_SYS_FLASH_BANKS_LIST    {CONFIG_SYS_FLASH_BASE}
+#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
+#define CONFIG_SYS_MAX_FLASH_SECT	512	/* max number of sectors on one chip	*/
 
-#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
-#define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
+#define CONFIG_SYS_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
+#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
 
-#define CFG_FLASH_USE_BUFFER_WRITE 1	/* use buffered writes (20x faster)	*/
-#define CFG_FLASH_EMPTY_INFO		/* print 'E' for empty sector on flinfo */
+#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1	/* use buffered writes (20x faster)	*/
+#define CONFIG_SYS_FLASH_EMPTY_INFO		/* print 'E' for empty sector on flinfo */
 
-#ifdef CFG_ENV_IS_IN_FLASH
-#define CFG_ENV_SECT_SIZE	0x20000	/* size of one complete sector	*/
-#define CFG_ENV_ADDR		(CFG_MONITOR_BASE-CFG_ENV_SECT_SIZE)
-#define	CFG_ENV_SIZE		0x4000	/* Total Size of Environment Sector	*/
+#ifdef CONFIG_ENV_IS_IN_FLASH
+#define CONFIG_ENV_SECT_SIZE	0x20000	/* size of one complete sector	*/
+#define CONFIG_ENV_ADDR		(CONFIG_SYS_MONITOR_BASE-CONFIG_ENV_SECT_SIZE)
+#define	CONFIG_ENV_SIZE		0x4000	/* Total Size of Environment Sector	*/
 
 /* Address and size of Redundant Environment Sector	*/
-#define CFG_ENV_ADDR_REDUND	(CFG_ENV_ADDR-CFG_ENV_SECT_SIZE)
-#define CFG_ENV_SIZE_REDUND	(CFG_ENV_SIZE)
-#endif /* CFG_ENV_IS_IN_FLASH */
+#define CONFIG_ENV_ADDR_REDUND	(CONFIG_ENV_ADDR-CONFIG_ENV_SECT_SIZE)
+#define CONFIG_ENV_SIZE_REDUND	(CONFIG_ENV_SIZE)
+#endif /* CONFIG_ENV_IS_IN_FLASH */
 
 /*-----------------------------------------------------------------------
  * DDR SDRAM
  *----------------------------------------------------------------------*/
-#define CFG_MBYTES_SDRAM        (256)		/* 256MB			*/
+#define CONFIG_SYS_MBYTES_SDRAM        (256)		/* 256MB			*/
 
-#define	CFG_SDRAM0_MB0CF_BASE	((  0 << 20) + CFG_SDRAM_BASE)
-#define	CFG_SDRAM0_MB1CF_BASE	((128 << 20) + CFG_SDRAM_BASE)
+#define	CONFIG_SYS_SDRAM0_MB0CF_BASE	((  0 << 20) + CONFIG_SYS_SDRAM_BASE)
+#define	CONFIG_SYS_SDRAM0_MB1CF_BASE	((128 << 20) + CONFIG_SYS_SDRAM_BASE)
 
 /* DDR1/2 SDRAM Device Control Register Data Values */
-#define CFG_SDRAM0_MB0CF	((CFG_SDRAM0_MB0CF_BASE >> 3)	| \
+#define CONFIG_SYS_SDRAM0_MB0CF	((CONFIG_SYS_SDRAM0_MB0CF_BASE >> 3)	| \
 				 SDRAM_RXBAS_SDSZ_128MB 	| \
 				 SDRAM_RXBAS_SDAM_MODE2 	| \
 				 SDRAM_RXBAS_SDBE_ENABLE)
-#define CFG_SDRAM0_MB1CF	((CFG_SDRAM0_MB1CF_BASE >> 3)	| \
+#define CONFIG_SYS_SDRAM0_MB1CF	((CONFIG_SYS_SDRAM0_MB1CF_BASE >> 3)	| \
 				 SDRAM_RXBAS_SDSZ_128MB 	| \
 				 SDRAM_RXBAS_SDAM_MODE2 	| \
 				 SDRAM_RXBAS_SDBE_ENABLE)
-#define CFG_SDRAM0_MB2CF	SDRAM_RXBAS_SDBE_DISABLE
-#define CFG_SDRAM0_MB3CF	SDRAM_RXBAS_SDBE_DISABLE
-#define CFG_SDRAM0_MCOPT1	0x04322000
-#define CFG_SDRAM0_MCOPT2	0x00000000
-#define CFG_SDRAM0_MODT0	0x01800000
-#define CFG_SDRAM0_MODT1	0x00000000
-#define CFG_SDRAM0_CODT		0x0080f837
-#define CFG_SDRAM0_RTR		0x06180000
-#define CFG_SDRAM0_INITPLR0	0xa8380000
-#define CFG_SDRAM0_INITPLR1	0x81900400
-#define CFG_SDRAM0_INITPLR2	0x81020000
-#define CFG_SDRAM0_INITPLR3	0x81030000
-#define CFG_SDRAM0_INITPLR4	0x81010404
-#define CFG_SDRAM0_INITPLR5	0x81000542
-#define CFG_SDRAM0_INITPLR6	0x81900400
-#define CFG_SDRAM0_INITPLR7	0x8D080000
-#define CFG_SDRAM0_INITPLR8	0x8D080000
-#define CFG_SDRAM0_INITPLR9	0x8D080000
-#define CFG_SDRAM0_INITPLR10	0x8D080000
-#define CFG_SDRAM0_INITPLR11	0x81000442
-#define CFG_SDRAM0_INITPLR12	0x81010780
-#define CFG_SDRAM0_INITPLR13	0x81010400
-#define CFG_SDRAM0_INITPLR14	0x00000000
-#define CFG_SDRAM0_INITPLR15	0x00000000
-#define CFG_SDRAM0_RQDC		0x80000038
-#define CFG_SDRAM0_RFDC		0x00000209
-#define CFG_SDRAM0_RDCC		0x40000000
-#define CFG_SDRAM0_DLCR		0x030000a5
-#define CFG_SDRAM0_CLKTR	0x80000000
-#define CFG_SDRAM0_WRDTR	0x00000000
-#define CFG_SDRAM0_SDTR1	0x80201000
-#define CFG_SDRAM0_SDTR2	0x32204232
-#define CFG_SDRAM0_SDTR3	0x080b0d1a
-#define CFG_SDRAM0_MMODE	0x00000442
-#define CFG_SDRAM0_MEMODE	0x00000404
+#define CONFIG_SYS_SDRAM0_MB2CF	SDRAM_RXBAS_SDBE_DISABLE
+#define CONFIG_SYS_SDRAM0_MB3CF	SDRAM_RXBAS_SDBE_DISABLE
+#define CONFIG_SYS_SDRAM0_MCOPT1	0x04322000
+#define CONFIG_SYS_SDRAM0_MCOPT2	0x00000000
+#define CONFIG_SYS_SDRAM0_MODT0	0x01800000
+#define CONFIG_SYS_SDRAM0_MODT1	0x00000000
+#define CONFIG_SYS_SDRAM0_CODT		0x0080f837
+#define CONFIG_SYS_SDRAM0_RTR		0x06180000
+#define CONFIG_SYS_SDRAM0_INITPLR0	0xa8380000
+#define CONFIG_SYS_SDRAM0_INITPLR1	0x81900400
+#define CONFIG_SYS_SDRAM0_INITPLR2	0x81020000
+#define CONFIG_SYS_SDRAM0_INITPLR3	0x81030000
+#define CONFIG_SYS_SDRAM0_INITPLR4	0x81010404
+#define CONFIG_SYS_SDRAM0_INITPLR5	0x81000542
+#define CONFIG_SYS_SDRAM0_INITPLR6	0x81900400
+#define CONFIG_SYS_SDRAM0_INITPLR7	0x8D080000
+#define CONFIG_SYS_SDRAM0_INITPLR8	0x8D080000
+#define CONFIG_SYS_SDRAM0_INITPLR9	0x8D080000
+#define CONFIG_SYS_SDRAM0_INITPLR10	0x8D080000
+#define CONFIG_SYS_SDRAM0_INITPLR11	0x81000442
+#define CONFIG_SYS_SDRAM0_INITPLR12	0x81010780
+#define CONFIG_SYS_SDRAM0_INITPLR13	0x81010400
+#define CONFIG_SYS_SDRAM0_INITPLR14	0x00000000
+#define CONFIG_SYS_SDRAM0_INITPLR15	0x00000000
+#define CONFIG_SYS_SDRAM0_RQDC		0x80000038
+#define CONFIG_SYS_SDRAM0_RFDC		0x00000209
+#define CONFIG_SYS_SDRAM0_RDCC		0x40000000
+#define CONFIG_SYS_SDRAM0_DLCR		0x030000a5
+#define CONFIG_SYS_SDRAM0_CLKTR	0x80000000
+#define CONFIG_SYS_SDRAM0_WRDTR	0x00000000
+#define CONFIG_SYS_SDRAM0_SDTR1	0x80201000
+#define CONFIG_SYS_SDRAM0_SDTR2	0x32204232
+#define CONFIG_SYS_SDRAM0_SDTR3	0x080b0d1a
+#define CONFIG_SYS_SDRAM0_MMODE	0x00000442
+#define CONFIG_SYS_SDRAM0_MEMODE	0x00000404
 
 /*-----------------------------------------------------------------------
  * I2C
  *----------------------------------------------------------------------*/
-#define CFG_I2C_SPEED		400000	/* I2C speed and slave address	*/
+#define CONFIG_SYS_I2C_SPEED		400000	/* I2C speed and slave address	*/
 
-#define CFG_EEPROM_PAGE_WRITE_DELAY_MS	6	/* 24C02 requires 5ms delay */
-#define CFG_I2C_EEPROM_ADDR	0x52	/* I2C boot EEPROM (24C02BN)	*/
-#define CFG_I2C_EEPROM_ADDR_LEN	1	/* Bytes of address		*/
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	6	/* 24C02 requires 5ms delay */
+#define CONFIG_SYS_I2C_EEPROM_ADDR	0x52	/* I2C boot EEPROM (24C02BN)	*/
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN	1	/* Bytes of address		*/
 
 /* Standard DTT sensor configuration */
 #define CONFIG_DTT_DS1775	1
 #define CONFIG_DTT_SENSORS	{ 0 }
-#define CFG_I2C_DTT_ADDR	0x48
+#define CONFIG_SYS_I2C_DTT_ADDR	0x48
 
 /* RTC configuration */
 #define CONFIG_RTC_X1205	1
-#define CFG_I2C_RTC_ADDR	0x6f
+#define CONFIG_SYS_I2C_RTC_ADDR	0x6f
 
 /*-----------------------------------------------------------------------
  * Ethernet
@@ -259,20 +259,20 @@
 #define CONFIG_CMD_SNTP
 
 /* POST support */
-#define CONFIG_POST		(CFG_POST_CACHE		| \
-				 CFG_POST_CPU		| \
-				 CFG_POST_ETHER		| \
-				 CFG_POST_I2C		| \
-				 CFG_POST_MEMORY	| \
-				 CFG_POST_UART)
+#define CONFIG_POST		(CONFIG_SYS_POST_CACHE		| \
+				 CONFIG_SYS_POST_CPU		| \
+				 CONFIG_SYS_POST_ETHER		| \
+				 CONFIG_SYS_POST_I2C		| \
+				 CONFIG_SYS_POST_MEMORY	| \
+				 CONFIG_SYS_POST_UART)
 
 /* Define here the base-addresses of the UARTs to test in POST */
-#define CFG_POST_UART_TABLE	{UART0_BASE, UART1_BASE}
+#define CONFIG_SYS_POST_UART_TABLE	{UART0_BASE, UART1_BASE}
 
 #define CONFIG_LOGBUFFER
-#define CFG_POST_CACHE_ADDR	0x00800000 /* free virtual address	*/
+#define CONFIG_SYS_POST_CACHE_ADDR	0x00800000 /* free virtual address	*/
 
-#define CFG_CONSOLE_IS_IN_ENV /* Otherwise it catches logbuffer as output */
+#define CONFIG_SYS_CONSOLE_IS_IN_ENV /* Otherwise it catches logbuffer as output */
 
 /*-----------------------------------------------------------------------
  * PCI stuff
@@ -285,40 +285,40 @@
 /*-----------------------------------------------------------------------
  * PCIe stuff
  *----------------------------------------------------------------------*/
-#define CFG_PCIE_MEMBASE	0x90000000	/* mapped PCIe memory	*/
-#define CFG_PCIE_MEMSIZE	0x08000000      /* 128 Meg, smallest incr per port */
+#define CONFIG_SYS_PCIE_MEMBASE	0x90000000	/* mapped PCIe memory	*/
+#define CONFIG_SYS_PCIE_MEMSIZE	0x08000000      /* 128 Meg, smallest incr per port */
 
-#define	CFG_PCIE0_CFGBASE	0xa0000000      /* remote access */
-#define	CFG_PCIE0_XCFGBASE	0xb0000000      /* local access */
-#define	CFG_PCIE0_CFGMASK	0xe0000001      /* 512 Meg */
+#define	CONFIG_SYS_PCIE0_CFGBASE	0xa0000000      /* remote access */
+#define	CONFIG_SYS_PCIE0_XCFGBASE	0xb0000000      /* local access */
+#define	CONFIG_SYS_PCIE0_CFGMASK	0xe0000001      /* 512 Meg */
 
-#define	CFG_PCIE1_CFGBASE	0xc0000000      /* remote access */
-#define	CFG_PCIE1_XCFGBASE	0xd0000000      /* local access */
-#define	CFG_PCIE1_CFGMASK	0xe0000001      /* 512 Meg */
+#define	CONFIG_SYS_PCIE1_CFGBASE	0xc0000000      /* remote access */
+#define	CONFIG_SYS_PCIE1_XCFGBASE	0xd0000000      /* local access */
+#define	CONFIG_SYS_PCIE1_CFGMASK	0xe0000001      /* 512 Meg */
 
-#define	CFG_PCIE0_UTLBASE	0xef502000
-#define	CFG_PCIE1_UTLBASE	0xef503000
+#define	CONFIG_SYS_PCIE0_UTLBASE	0xef502000
+#define	CONFIG_SYS_PCIE1_UTLBASE	0xef503000
 
 /* base address of inbound PCIe window */
-#define CFG_PCIE_INBOUND_BASE	0x0000000000000000ULL
+#define CONFIG_SYS_PCIE_INBOUND_BASE	0x0000000000000000ULL
 
 /*-----------------------------------------------------------------------
  * External Bus Controller (EBC) Setup
  *----------------------------------------------------------------------*/
 /* Memory Bank 0 (NOR-FLASH) initialization					*/
-#define CFG_EBC_PB0AP		0x08033700
-#define CFG_EBC_PB0CR		(CFG_FLASH_BASE | 0xda000)
+#define CONFIG_SYS_EBC_PB0AP		0x08033700
+#define CONFIG_SYS_EBC_PB0CR		(CONFIG_SYS_FLASH_BASE | 0xda000)
 
 /* Memory Bank 2 (CPLD) initialization						*/
-#define CFG_EBC_PB2AP           0x9400C800
-#define CFG_EBC_PB2CR           0xF0018000 /*  BAS=0x800,BS=1MB,BU=R/W,BW=8bit	*/
+#define CONFIG_SYS_EBC_PB2AP           0x9400C800
+#define CONFIG_SYS_EBC_PB2CR           0xF0018000 /*  BAS=0x800,BS=1MB,BU=R/W,BW=8bit	*/
 
-#define CFG_EBC_CFG		0x7FC00000 /*  EBC0_CFG */
+#define CONFIG_SYS_EBC_CFG		0x7FC00000 /*  EBC0_CFG */
 
 /*-----------------------------------------------------------------------
  * GPIO Setup
  *----------------------------------------------------------------------*/
-#define CFG_4xx_GPIO_TABLE { /*	  Out		  GPIO	Alternate1	Alternate2	Alternate3 */ \
+#define CONFIG_SYS_4xx_GPIO_TABLE { /*	  Out		  GPIO	Alternate1	Alternate2	Alternate3 */ \
 {											\
 /* GPIO Core 0 */									\
 {GPIO0_BASE, GPIO_IN,  GPIO_SEL,  GPIO_OUT_0}, /* GPIO0	EBC_DATA_PAR(0)			*/	\
@@ -356,8 +356,8 @@
 }												\
 }
 
-#define CFG_GPIO_PCIE_RST	23
-#define CFG_GPIO_PCIE_CLKREQ	27
-#define CFG_GPIO_PCIE_WAKE	28
+#define CONFIG_SYS_GPIO_PCIE_RST	23
+#define CONFIG_SYS_GPIO_PCIE_CLKREQ	27
+#define CONFIG_SYS_GPIO_PCIE_WAKE	28
 
 #endif	/* __CONFIG_H */
diff --git a/include/configs/mcc200.h b/include/configs/mcc200.h
index f51284744..e64cc3704 100644
--- a/include/configs/mcc200.h
+++ b/include/configs/mcc200.h
@@ -33,7 +33,7 @@
 #define CONFIG_MPC5xxx		1	/* This is an MPC5xxx CPU		*/
 #define CONFIG_MCC200		1	/* ... on MCC200 board			*/
 
-#define CFG_MPC5XXX_CLKIN	33000000 /* ... running at 33MHz		*/
+#define CONFIG_SYS_MPC5XXX_CLKIN	33000000 /* ... running at 33MHz		*/
 
 #define CONFIG_MISC_INIT_R
 
@@ -81,7 +81,7 @@
 #error "Select only one console device!"
 #endif
 #define CONFIG_BAUDRATE		115200
-#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
 
 #define CONFIG_MII		1
 
@@ -131,11 +131,11 @@
 #define MK_STR(x)		XMK_STR(x)
 
 #ifdef CONFIG_PRS200
-# define CFG__BOARDNAME		"prs200"
-# define CFG__LINUX_CONSOLE	"ttyS0"
+# define CONFIG_SYS__BOARDNAME		"prs200"
+# define CONFIG_SYS__LINUX_CONSOLE	"ttyS0"
 #else
-# define CFG__BOARDNAME		"mcc200"
-# define CFG__LINUX_CONSOLE	"ttyEU5"
+# define CONFIG_SYS__BOARDNAME		"mcc200"
+# define CONFIG_SYS__LINUX_CONSOLE	"ttyEU5"
 #endif
 
 /* Network */
@@ -148,7 +148,7 @@
 #define CONFIG_EXTRA_ENV_SETTINGS					\
 	"ubootver=" U_BOOT_VERSION "\0"					\
 	"netdev=eth0\0"							\
-	"hostname=" CFG__BOARDNAME "\0"					\
+	"hostname=" CONFIG_SYS__BOARDNAME "\0"					\
 	"nfsargs=setenv bootargs root=/dev/nfs rw "			\
 		"nfsroot=${serverip}:${rootpath}\0"			\
 	"ramargs=setenv bootargs root=/dev/mtdblock2 "			\
@@ -165,10 +165,10 @@
 		"bootm ${kernel_addr} ${ramdisk_addr}\0"		\
 	"net_nfs=tftp 200000 ${bootfile};"				\
 		"run nfsargs addip addcons;bootm\0"			\
-	"console=" CFG__LINUX_CONSOLE "\0"				\
+	"console=" CONFIG_SYS__LINUX_CONSOLE "\0"				\
 	"rootpath=/opt/eldk/ppc_6xx\0"					\
-	"bootfile=/tftpboot/" CFG__BOARDNAME "/uImage\0"		\
-	"load=tftp 200000 /tftpboot/" CFG__BOARDNAME "/u-boot.bin\0"	\
+	"bootfile=/tftpboot/" CONFIG_SYS__BOARDNAME "/uImage\0"		\
+	"load=tftp 200000 /tftpboot/" CONFIG_SYS__BOARDNAME "/u-boot.bin\0"	\
 	"text_base=" MK_STR(TEXT_BASE) "\0"				\
 	"kernel_addr=0xFC0C0000\0"					\
 	"update=protect off ${text_base} +${filesize};"			\
@@ -181,22 +181,22 @@
 
 #define CONFIG_BOOTCOMMAND	"run flash_self"
 
-#define CFG_HUSH_PARSER		1	/* use "hush" command parser	*/
-#define CFG_PROMPT_HUSH_PS2	"> "
+#define CONFIG_SYS_HUSH_PARSER		1	/* use "hush" command parser	*/
+#define CONFIG_SYS_PROMPT_HUSH_PS2	"> "
 
 /*
  * IPB Bus clocking configuration.
  */
-#define CFG_IPBCLK_EQUALS_XLBCLK		/* define for 133MHz speed */
+#define CONFIG_SYS_IPBCLK_EQUALS_XLBCLK		/* define for 133MHz speed */
 
 /*
  * I2C configuration
  */
 #define CONFIG_HARD_I2C		1	/* I2C with hardware support */
-#define CFG_I2C_MODULE		2	/* Select I2C module #1 or #2 */
+#define CONFIG_SYS_I2C_MODULE		2	/* Select I2C module #1 or #2 */
 
-#define CFG_I2C_SPEED		100000 /* 100 kHz */
-#define CFG_I2C_SLAVE		0x7F
+#define CONFIG_SYS_I2C_SPEED		100000 /* 100 kHz */
+#define CONFIG_SYS_I2C_SLAVE		0x7F
 
 /*
  * Flash configuration (8,16 or 32 MB)
@@ -207,66 +207,66 @@
  *		 0xFF000000 for 16 MB
  *		 0xFF800000 for  8 MB
  */
-#define CFG_FLASH_BASE		0xfc000000
-#define CFG_FLASH_SIZE		0x04000000
+#define CONFIG_SYS_FLASH_BASE		0xfc000000
+#define CONFIG_SYS_FLASH_SIZE		0x04000000
 
-#define CFG_FLASH_CFI				/* The flash is CFI compatible	*/
+#define CONFIG_SYS_FLASH_CFI				/* The flash is CFI compatible	*/
 #define CONFIG_FLASH_CFI_DRIVER			/* Use common CFI driver	*/
 
-#define CFG_FLASH_BANKS_LIST	{ CFG_FLASH_BASE }
+#define CONFIG_SYS_FLASH_BANKS_LIST	{ CONFIG_SYS_FLASH_BASE }
 
-#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
-#define CFG_MAX_FLASH_SECT	512	/* max number of sectors on one chip	*/
+#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
+#define CONFIG_SYS_MAX_FLASH_SECT	512	/* max number of sectors on one chip	*/
 
-#define CFG_FLASH_USE_BUFFER_WRITE 1	/* use buffered writes (20x faster)	*/
-#define CFG_FLASH_PROTECTION	1	/* hardware flash protection		*/
+#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1	/* use buffered writes (20x faster)	*/
+#define CONFIG_SYS_FLASH_PROTECTION	1	/* hardware flash protection		*/
 
-#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
-#define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
+#define CONFIG_SYS_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
+#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
 
-#define CFG_FLASH_EMPTY_INFO		/* print 'E' for empty sector on flinfo */
-#define CFG_FLASH_QUIET_TEST	1	/* don't warn upon unknown flash	*/
+#define CONFIG_SYS_FLASH_EMPTY_INFO		/* print 'E' for empty sector on flinfo */
+#define CONFIG_SYS_FLASH_QUIET_TEST	1	/* don't warn upon unknown flash	*/
 
-#define CFG_ENV_IS_IN_FLASH	1	/* use FLASH for environment vars	*/
+#define CONFIG_ENV_IS_IN_FLASH	1	/* use FLASH for environment vars	*/
 
-#define CFG_ENV_SECT_SIZE	0x40000	/* size of one complete sector	*/
-#define CFG_ENV_ADDR		(CFG_MONITOR_BASE + CFG_MONITOR_LEN)
-#define	CFG_ENV_SIZE		0x2000	/* Total Size of Environment Sector	*/
+#define CONFIG_ENV_SECT_SIZE	0x40000	/* size of one complete sector	*/
+#define CONFIG_ENV_ADDR		(CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)
+#define	CONFIG_ENV_SIZE		0x2000	/* Total Size of Environment Sector	*/
 
 /* Address and size of Redundant Environment Sector	*/
-#define CFG_ENV_ADDR_REDUND	(CFG_ENV_ADDR + CFG_ENV_SECT_SIZE)
-#define CFG_ENV_SIZE_REDUND	(CFG_ENV_SIZE)
+#define CONFIG_ENV_ADDR_REDUND	(CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE)
+#define CONFIG_ENV_SIZE_REDUND	(CONFIG_ENV_SIZE)
 
 #define CONFIG_ENV_OVERWRITE	1	/* allow modification of vendor params */
 
-#if TEXT_BASE == CFG_FLASH_BASE
-#define CFG_LOWBOOT	1
+#if TEXT_BASE == CONFIG_SYS_FLASH_BASE
+#define CONFIG_SYS_LOWBOOT	1
 #endif
 
 /*
  * Memory map
  */
-#define CFG_MBAR		0xf0000000
-#define CFG_SDRAM_BASE		0x00000000
-#define CFG_DEFAULT_MBAR	0x80000000
+#define CONFIG_SYS_MBAR		0xf0000000
+#define CONFIG_SYS_SDRAM_BASE		0x00000000
+#define CONFIG_SYS_DEFAULT_MBAR	0x80000000
 
 /* Use SRAM until RAM will be available */
-#define CFG_INIT_RAM_ADDR	MPC5XXX_SRAM
-#define CFG_INIT_RAM_END	MPC5XXX_SRAM_SIZE	/* End of used area in DPRAM */
+#define CONFIG_SYS_INIT_RAM_ADDR	MPC5XXX_SRAM
+#define CONFIG_SYS_INIT_RAM_END	MPC5XXX_SRAM_SIZE	/* End of used area in DPRAM */
 
 
-#define CFG_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
-#define CFG_MONITOR_BASE	TEXT_BASE
-#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
-#   define CFG_RAMBOOT		1
+#define CONFIG_SYS_MONITOR_BASE	TEXT_BASE
+#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
+#   define CONFIG_SYS_RAMBOOT		1
 #endif
 
-#define CFG_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor	*/
-#define CFG_MALLOC_LEN		(512 << 10)	/* Reserve 512 kB for malloc()	*/
-#define CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
+#define CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor	*/
+#define CONFIG_SYS_MALLOC_LEN		(512 << 10)	/* Reserve 512 kB for malloc()	*/
+#define CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
 
 /*
  * Ethernet configuration
@@ -288,7 +288,7 @@
 
 #if defined(CONFIG_LCD)
 #define CONFIG_SPLASH_SCREEN	1
-#define CFG_CONSOLE_IS_IN_ENV	1
+#define CONFIG_SYS_CONSOLE_IS_IN_ENV	1
 #define LCD_BPP			LCD_MONOCHROME
 #endif
 
@@ -299,64 +299,64 @@
 /* 0x90000004 = 64MB SDRAM */
 #if defined(CONFIG_LCD)
 /* set PSC2 in UART mode */
-#define CFG_GPS_PORT_CONFIG	0x00000044
+#define CONFIG_SYS_GPS_PORT_CONFIG	0x00000044
 #else
-#define CFG_GPS_PORT_CONFIG	0x00000004
+#define CONFIG_SYS_GPS_PORT_CONFIG	0x00000004
 #endif
 
 /*
  * Miscellaneous configurable options
  */
-#define CFG_LONGHELP			/* undef to save memory		*/
-#define CFG_PROMPT		"=> "	/* Monitor Command Prompt	*/
+#define CONFIG_SYS_LONGHELP			/* undef to save memory		*/
+#define CONFIG_SYS_PROMPT		"=> "	/* Monitor Command Prompt	*/
 #if defined(CONFIG_CMD_KGDB)
-#define CFG_CBSIZE		1024	/* Console I/O Buffer Size	*/
+#define CONFIG_SYS_CBSIZE		1024	/* Console I/O Buffer Size	*/
 #else
-#define CFG_CBSIZE		256	/* Console I/O Buffer Size	*/
+#define CONFIG_SYS_CBSIZE		256	/* Console I/O Buffer Size	*/
 #endif
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16)	/* Print Buffer Size	*/
-#define CFG_MAXARGS		16		/* max number of command args	*/
-#define CFG_BARGSIZE		CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)	/* Print Buffer Size	*/
+#define CONFIG_SYS_MAXARGS		16		/* max number of command args	*/
+#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
 
-#define CFG_MEMTEST_START	0x00100000	/* memtest works on	*/
-#define CFG_MEMTEST_END		0x00f00000	/* 1 ... 15 MB in DRAM	*/
+#define CONFIG_SYS_MEMTEST_START	0x00100000	/* memtest works on	*/
+#define CONFIG_SYS_MEMTEST_END		0x00f00000	/* 1 ... 15 MB in DRAM	*/
 
-#define CFG_LOAD_ADDR		0x100000	/* default load address */
+#define CONFIG_SYS_LOAD_ADDR		0x100000	/* default load address */
 
-#define CFG_HZ			1000	/* decrementer freq: 1 ms ticks */
+#define CONFIG_SYS_HZ			1000	/* decrementer freq: 1 ms ticks */
 
-#define CFG_CACHELINE_SIZE	32	/* For MPC5xxx CPUs			*/
+#define CONFIG_SYS_CACHELINE_SIZE	32	/* For MPC5xxx CPUs			*/
 #if defined(CONFIG_CMD_KGDB)
-#  define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value	*/
+#  define CONFIG_SYS_CACHELINE_SHIFT	5	/* log base 2 of the above value	*/
 #endif
 
 /*
  * Various low-level settings
  */
-#define CFG_HID0_INIT		HID0_ICE | HID0_ICFI
-#define CFG_HID0_FINAL		HID0_ICE
+#define CONFIG_SYS_HID0_INIT		HID0_ICE | HID0_ICFI
+#define CONFIG_SYS_HID0_FINAL		HID0_ICE
 
-#define CFG_BOOTCS_START	CFG_FLASH_BASE
-#define CFG_BOOTCS_SIZE		CFG_FLASH_SIZE
-#define CFG_BOOTCS_CFG		0x0004fb00
-#define CFG_CS0_START		CFG_FLASH_BASE
-#define CFG_CS0_SIZE		CFG_FLASH_SIZE
+#define CONFIG_SYS_BOOTCS_START	CONFIG_SYS_FLASH_BASE
+#define CONFIG_SYS_BOOTCS_SIZE		CONFIG_SYS_FLASH_SIZE
+#define CONFIG_SYS_BOOTCS_CFG		0x0004fb00
+#define CONFIG_SYS_CS0_START		CONFIG_SYS_FLASH_BASE
+#define CONFIG_SYS_CS0_SIZE		CONFIG_SYS_FLASH_SIZE
 
 /* Quad UART @0x80000000 (MBAR is relocated to 0xF0000000) */
-#define CFG_CS2_START		0x80000000
-#define CFG_CS2_SIZE		0x00001000
-#define CFG_CS2_CFG		0x1d300
+#define CONFIG_SYS_CS2_START		0x80000000
+#define CONFIG_SYS_CS2_SIZE		0x00001000
+#define CONFIG_SYS_CS2_CFG		0x1d300
 
 /* Second Quad UART @0x80010000 */
-#define CFG_CS1_START		0x80010000
-#define CFG_CS1_SIZE		0x00001000
-#define CFG_CS1_CFG		0x1d300
+#define CONFIG_SYS_CS1_START		0x80010000
+#define CONFIG_SYS_CS1_SIZE		0x00001000
+#define CONFIG_SYS_CS1_CFG		0x1d300
 
 /* Leica - build revision resistors */
 /*
-#define CFG_CS3_START		0x80020000
-#define CFG_CS3_SIZE		0x00000004
-#define CFG_CS3_CFG		0x1d300
+#define CONFIG_SYS_CS3_START		0x80020000
+#define CONFIG_SYS_CS3_SIZE		0x00000004
+#define CONFIG_SYS_CS3_CFG		0x1d300
 */
 
 /*
@@ -364,10 +364,10 @@
  * console. If undefined - PSC console
  * wil be default
  */
-#define CFG_CS_BURST		0x00000000
-#define CFG_CS_DEADCYCLE	0x33333333
+#define CONFIG_SYS_CS_BURST		0x00000000
+#define CONFIG_SYS_CS_DEADCYCLE	0x33333333
 
-#define CFG_RESET_ADDRESS	0xff000000
+#define CONFIG_SYS_RESET_ADDRESS	0xff000000
 
 /*
  * QUART Expanders support
@@ -376,8 +376,8 @@
 /*
  * We'll use NS16550 chip routines,
  */
-#define CFG_NS16550		1
-#define CFG_NS16550_SERIAL	1
+#define CONFIG_SYS_NS16550		1
+#define CONFIG_SYS_NS16550_SERIAL	1
 #define CONFIG_CONS_INDEX	1
 /*
  *  To achieve necessary offset on SC16C554
@@ -386,7 +386,7 @@
  * should be 4, because A0-A2 pins are connected
  * to DA2-DA4 address bus lines.
  */
-#define CFG_NS16550_REG_SIZE	4
+#define CONFIG_SYS_NS16550_REG_SIZE	4
 /*
  * LocalPlus Bus already inited in cpu_init_f(),
  * so can work with QUART's chip selects.
@@ -394,9 +394,9 @@
  * A3-A4 (DA5-DA6) lines.
  */
 #if (CONFIG_QUART_CONSOLE > 0) && (CONFIG_QUART_CONSOLE < 5) && !defined(CONFIG_PRS200)
-#define CFG_NS16550_COM1	(CFG_CS2_START | (CONFIG_QUART_CONSOLE - 1)<<5)
+#define CONFIG_SYS_NS16550_COM1	(CONFIG_SYS_CS2_START | (CONFIG_QUART_CONSOLE - 1)<<5)
 #elif (CONFIG_QUART_CONSOLE > 4) && (CONFIG_QUART_CONSOLE < 9)
-#define CFG_NS16550_COM1	(CFG_CS1_START | (CONFIG_QUART_CONSOLE - 5)<<5)
+#define CONFIG_SYS_NS16550_COM1	(CONFIG_SYS_CS1_START | (CONFIG_QUART_CONSOLE - 5)<<5)
 #elif
 #error "Wrong QUART expander number."
 #endif
@@ -405,7 +405,7 @@
  * SC16C554 chip's external crystal oscillator frequency
  * is 7.3728 MHz
  */
-#define CFG_NS16550_CLK		7372800
+#define CONFIG_SYS_NS16550_CLK		7372800
 #endif /* CONFIG_QUART_CONSOLE */
 /*-----------------------------------------------------------------------
  * USB stuff
diff --git a/include/configs/mcu25.h b/include/configs/mcu25.h
index 6adba9616..5f3119883 100644
--- a/include/configs/mcu25.h
+++ b/include/configs/mcu25.h
@@ -35,6 +35,12 @@
 #define CONFIG_4xx		1		/* ... PPC4xx family	*/
 #define CONFIG_405GP 1
 #define CONFIG_4xx   1
+#define CONFIG_HOSTNAME		mcu25
+
+/*
+ * Include common defines/options for all boards produced by Netstal Maschinen
+ */
+#include "netstal-common.h"
 
 #define CONFIG_SYS_CLK_FREQ	33333333	/* external freq to pll	*/
 
@@ -45,46 +51,44 @@
  * Base addresses -- Note these are effective addresses where the
  * actual resources get mapped (not physical addresses)
 *----------------------------------------------------------------------*/
-#define CFG_MONITOR_LEN		(320 * 1024) /* Reserve 320 kB for Monitor */
-#define CFG_MALLOC_LEN		(256 * 1024) /* Reserve 256 kB for malloc() */
+#define CONFIG_SYS_MONITOR_LEN		(320 * 1024) /* Reserve 320 kB for Monitor */
+#define CONFIG_SYS_MALLOC_LEN		(256 * 1024) /* Reserve 256 kB for malloc() */
 
 
-#define CFG_SDRAM_BASE		0x00000000	/* _must_ be 0		*/
-#define CFG_FLASH_BASE		0xfff80000	/* start of FLASH	*/
-#define CFG_MONITOR_BASE	TEXT_BASE
+#define CONFIG_SYS_SDRAM_BASE		0x00000000	/* _must_ be 0		*/
+#define CONFIG_SYS_FLASH_BASE		0xfff80000	/* start of FLASH	*/
+#define CONFIG_SYS_MONITOR_BASE	TEXT_BASE
 
 /* ... with on-chip memory here (4KBytes) */
-#define CFG_OCM_DATA_ADDR	0xF4000000
-#define CFG_OCM_DATA_SIZE	0x00001000
+#define CONFIG_SYS_OCM_DATA_ADDR	0xF4000000
+#define CONFIG_SYS_OCM_DATA_SIZE	0x00001000
 /* Do not set up locked dcache as init ram. */
-#undef CFG_INIT_DCACHE_CS
+#undef CONFIG_SYS_INIT_DCACHE_CS
 
 /* Use the On-Chip-Memory (OCM) as a temporary stack for the startup code. */
-#define CFG_TEMP_STACK_OCM	1
+#define CONFIG_SYS_TEMP_STACK_OCM	1
 
-#define CFG_INIT_RAM_ADDR	CFG_OCM_DATA_ADDR	/* OCM		*/
-#define CFG_INIT_RAM_END	CFG_OCM_DATA_SIZE
-#define CFG_GBL_DATA_SIZE	256		/* num bytes initial data */
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP_OFFSET	CFG_POST_WORD_ADDR
+#define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_OCM_DATA_ADDR	/* OCM		*/
+#define CONFIG_SYS_INIT_RAM_END	CONFIG_SYS_OCM_DATA_SIZE
+#define CONFIG_SYS_GBL_DATA_SIZE	256		/* num bytes initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_POST_WORD_ADDR
 
 /*-----------------------------------------------------------------------
  * Serial Port
  *----------------------------------------------------------------------*/
 /*
- * If CFG_EXT_SERIAL_CLOCK, then the UART divisor is 1.
- * If CFG_405_UART_ERRATA_59, then UART divisor is 31.
- * Otherwise, UART divisor is determined by CPU Clock and CFG_BASE_BAUD value.
+ * If CONFIG_SYS_EXT_SERIAL_CLOCK, then the UART divisor is 1.
+ * If CONFIG_SYS_405_UART_ERRATA_59, then UART divisor is 31.
+ * Otherwise, UART divisor is determined by CPU Clock and CONFIG_SYS_BASE_BAUD value.
  * The Linux BASE_BAUD define should match this configuration.
  *    baseBaud = cpuClock/(uartDivisor*16)
- * If CFG_405_UART_ERRATA_59 and 200MHz CPU clock,
+ * If CONFIG_SYS_405_UART_ERRATA_59 and 200MHz CPU clock,
  * set Linux BASE_BAUD to 403200.
  */
-#undef CFG_EXT_SERIAL_CLOCK	       /* external serial clock */
-#define CONFIG_SERIAL_MULTI  1
 /* needed to be able to define CONFIG_SERIAL_SOFTWARE_FIFO */
-#undef	CFG_405_UART_ERRATA_59	       /* 405GP/CR Rev. D silicon */
-#define CFG_BASE_BAUD	    691200
+#undef	CONFIG_SYS_405_UART_ERRATA_59	       /* 405GP/CR Rev. D silicon */
+#define CONFIG_SYS_BASE_BAUD	    691200
 
 /* Size (bytes) of interrupt driven serial port buffer.
  * Set to 0 to use polling instead of interrupts.
@@ -95,129 +99,63 @@
 /* Set console baudrate to 9600 */
 #define CONFIG_BAUDRATE		9600
 
-
-#define CFG_BAUDRATE_TABLE						\
-	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
-
 /*-----------------------------------------------------------------------
  * Flash
  *----------------------------------------------------------------------*/
 
 /* Use common CFI driver */
-#define CFG_FLASH_CFI
+#define CONFIG_SYS_FLASH_CFI
 #define CONFIG_FLASH_CFI_DRIVER
 /* board provides its own flash_init code */
 #define CONFIG_FLASH_CFI_LEGACY		1
-#define CFG_FLASH_CFI_WIDTH		FLASH_CFI_8BIT
-#define CFG_FLASH_LEGACY_512Kx8 1
+#define CONFIG_SYS_FLASH_CFI_WIDTH		FLASH_CFI_8BIT
+#define CONFIG_SYS_FLASH_LEGACY_512Kx8 1
 
 /* print 'E' for empty sector on flinfo */
-#define CFG_FLASH_EMPTY_INFO
+#define CONFIG_SYS_FLASH_EMPTY_INFO
 
-#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks */
-#define CFG_MAX_FLASH_SECT	8	/* max number of sectors on one chip */
+#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks */
+#define CONFIG_SYS_MAX_FLASH_SECT	8	/* max number of sectors on one chip */
 
 /*-----------------------------------------------------------------------
  * Environment
  *----------------------------------------------------------------------*/
 
-#undef	CFG_ENV_IS_IN_NVRAM
-#define CFG_ENV_IS_IN_FLASH
-#undef  CFG_ENV_IS_NOWHERE
+#undef	CONFIG_ENV_IS_IN_NVRAM
+#define CONFIG_ENV_IS_IN_FLASH
+#undef  CONFIG_ENV_IS_NOWHERE
 
-#ifdef  CFG_ENV_IS_IN_EEPROM
+#ifdef  CONFIG_ENV_IS_IN_EEPROM
 /* Put the environment after the SDRAM configuration */
 #define PROM_SIZE	2048
-#define CFG_ENV_OFFSET	 512
-#define CFG_ENV_SIZE	(PROM_SIZE-CFG_ENV_OFFSET)
+#define CONFIG_ENV_OFFSET	 512
+#define CONFIG_ENV_SIZE	(PROM_SIZE-CONFIG_ENV_OFFSET)
 #endif
 
-#ifdef CFG_ENV_IS_IN_FLASH
+#ifdef CONFIG_ENV_IS_IN_FLASH
 /* Put the environment in Flash */
-#define CFG_ENV_SECT_SIZE	0x10000 /* size of one complete sector */
-#define CFG_ENV_ADDR		((-CFG_MONITOR_LEN)-CFG_ENV_SECT_SIZE)
-#define	CFG_ENV_SIZE		8*1024	/* 8 KB Environment Sector */
+#define CONFIG_ENV_SECT_SIZE	0x10000 /* size of one complete sector */
+#define CONFIG_ENV_ADDR		((-CONFIG_SYS_MONITOR_LEN)-CONFIG_ENV_SECT_SIZE)
+#define	CONFIG_ENV_SIZE		8*1024	/* 8 KB Environment Sector */
 
 /* Address and size of Redundant Environment Sector	*/
-#define CFG_ENV_ADDR_REDUND	(CFG_ENV_ADDR-CFG_ENV_SECT_SIZE)
-#define CFG_ENV_SIZE_REDUND	(CFG_ENV_SIZE)
+#define CONFIG_ENV_ADDR_REDUND	(CONFIG_ENV_ADDR-CONFIG_ENV_SECT_SIZE)
+#define CONFIG_ENV_SIZE_REDUND	(CONFIG_ENV_SIZE)
 #endif
 
 /*-----------------------------------------------------------------------
  * I2C stuff for a ATMEL AT24C16 (2kB holding ENV, we are using the
  * the first internal I2C controller of the PPC440EPx
  *----------------------------------------------------------------------*/
-#define CFG_SPD_BUS_NUM		0
-
-#define CONFIG_HARD_I2C		1	/* I2C with hardware support */
-#undef	CONFIG_SOFT_I2C			/* I2C bit-banged		*/
-#define CFG_I2C_SPEED		400000	/* I2C speed and slave address	*/
-#define CFG_I2C_SLAVE		0x7F
-
-/* This is the 7bit address of the device, not including P. */
-#define CFG_I2C_EEPROM_ADDR 0x50
-#define CFG_I2C_EEPROM_ADDR_LEN 1
-
-/* The EEPROM can do 16byte ( 1 << 4 ) page writes. */
-#define CFG_I2C_EEPROM_ADDR_OVERFLOW	0x07
-#define CFG_EEPROM_PAGE_WRITE_BITS 4
-#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10
-#define CFG_EEPROM_PAGE_WRITE_ENABLE
-#undef CFG_I2C_MULTI_EEPROMS
-
-
-#define CONFIG_PREBOOT	"echo;"						\
-	"echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \
-	"echo"
-
-#undef	CONFIG_BOOTARGS
+#define CONFIG_SYS_SPD_BUS_NUM		0
 
 /* Setup some board specific values for the default environment variables */
-#define CONFIG_HOSTNAME		mcu25
-#define CONFIG_IPADDR		172.25.1.99
-#define CONFIG_ETHADDR      00:60:13:00:00:00   /* Netstal Machines AG MAC */
-#define CONFIG_OVERWRITE_ETHADDR_ONCE
-#define CONFIG_SERVERIP		172.25.1.3
-
-#define CFG_TFTP_LOADADDR 0x01000000 /* @16 MB */
-
-#define	CONFIG_EXTRA_ENV_SETTINGS				\
-	"netdev=eth0\0"							\
-	"loadaddr=0x01000000\0"						\
-	"nfsargs=setenv bootargs root=/dev/nfs rw "			\
-		"nfsroot=${serverip}:${rootpath}\0"			\
-	"ramargs=setenv bootargs root=/dev/ram rw\0"			\
-	"addip=setenv bootargs ${bootargs} "				\
-		"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"	\
-		":${hostname}:${netdev}:off panic=1\0"			\
-	"addtty=setenv bootargs ${bootargs} console=ttyS0,${baudrate}\0"\
-	"nfs=tftp 200000 ${bootfile};run nfsargs addip addtty;"		\
-	        "bootm\0"						\
-	"rootpath=/home/diagnose/eldk/ppc_4xx\0"			\
-	"bootfile=/tftpboot/mcu25/uImage\0"				\
-	"load=tftp 100000 mcu25/u-boot.bin\0"				\
-	"update=protect off FFFB0000 FFFFFFFF;era FFFB0000 FFFFFFFF;"	\
-		"cp.b 100000 FFFB0000 50000\0"			        \
-	"upd=run load;run update\0"					\
-	"vx_rom=mcu25/mcu25_vx_rom\0"					\
-	"vx=tftp ${loadaddr} ${vx_rom};run vxargs; bootvx\0"		\
-	"vxargs=setenv bootargs emac(0,0)c:${vx_rom} e=${ipaddr}"	\
-	" h=${serverip} u=dpu pw=netstal8752 tn=hcu5 f=0x3008\0"	\
-	""
-#define CONFIG_BOOTCOMMAND	"run vx"
-
-#define CONFIG_BOOTDELAY	5	/* autoboot after 5 seconds	*/
-
-#define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
-#define CFG_LOADS_BAUD_CHANGE	1	/* allow baudrate change	*/
-
-#define CONFIG_MII		1	/* MII PHY management		*/
-#define CONFIG_PHY_ADDR	1	/* PHY address			*/
+#define CONFIG_IPADDR		172.25.1.25
 
-#define CONFIG_PHY_RESET        1	/* reset phy upon startup */
-
-#define CONFIG_HAS_ETH0
-#define CFG_RX_ETH_BUFFER	16 /* Number of ethernet rx buffers & descr */
+#define	CONFIG_EXTRA_ENV_SETTINGS					\
+	CONFIG_NETSTAL_DEF_ENV						\
+	CONFIG_NETSTAL_DEF_ENV_POWERPC					\
+	""
 
 /*
  * BOOTP options
@@ -253,100 +191,93 @@
 #define SPD_EEPROM_ADDRESS      0x50
 
 /* POST support */
-#define CONFIG_POST		(CFG_POST_MEMORY   | \
-				 CFG_POST_CPU	   | \
-				 CFG_POST_UART	   | \
-				 CFG_POST_I2C	   | \
-				 CFG_POST_CACHE	   | \
-				 CFG_POST_ETHER	   | \
-				 CFG_POST_SPR)
-
-#define CFG_POST_UART_TABLE	{UART0_BASE}
-#define CFG_POST_WORD_ADDR	(CFG_GBL_DATA_OFFSET - 0x4)
+#define CONFIG_POST		(CONFIG_SYS_POST_MEMORY   | \
+				 CONFIG_SYS_POST_CPU	   | \
+				 CONFIG_SYS_POST_UART	   | \
+				 CONFIG_SYS_POST_I2C	   | \
+				 CONFIG_SYS_POST_CACHE	   | \
+				 CONFIG_SYS_POST_ETHER	   | \
+				 CONFIG_SYS_POST_SPR)
+
+#define CONFIG_SYS_POST_UART_TABLE	{UART0_BASE}
+#define CONFIG_SYS_POST_WORD_ADDR	(CONFIG_SYS_GBL_DATA_OFFSET - 0x4)
 #undef  CONFIG_LOGBUFFER
-#define CFG_POST_CACHE_ADDR	0x00800000 /* free virtual address	*/
-#define CFG_CONSOLE_IS_IN_ENV /* Otherwise it catches logbuffer as output */
+#define CONFIG_SYS_POST_CACHE_ADDR	0x00800000 /* free virtual address	*/
+#define CONFIG_SYS_CONSOLE_IS_IN_ENV /* Otherwise it catches logbuffer as output */
 
 /*-----------------------------------------------------------------------
  * Miscellaneous configurable options
  *----------------------------------------------------------------------*/
-#define CFG_LONGHELP			/* undef to save memory		*/
-#define CFG_PROMPT	"=> "		/* Monitor Command Prompt	*/
+#define CONFIG_SYS_LONGHELP			/* undef to save memory		*/
+#define CONFIG_SYS_PROMPT	"=> "		/* Monitor Command Prompt	*/
 #if defined(CONFIG_CMD_KGDB)
-	#define CFG_CBSIZE	1024		/* Console I/O Buffer Size */
+	#define CONFIG_SYS_CBSIZE	1024		/* Console I/O Buffer Size */
 #else
-	#define CFG_CBSIZE	256		/* Console I/O Buffer Size */
+	#define CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size */
 #endif
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define CFG_MAXARGS	16		/* max number of command args	*/
-#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size	*/
-
-#define CFG_MEMTEST_START	0x0400000	/* memtest works on	*/
-#define CFG_MEMTEST_END		0x0C00000	/* 4 ... 12 MB in DRAM	*/
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS	16		/* max number of command args	*/
+#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
 
+#define CONFIG_SYS_MEMTEST_START	0x0400000	/* memtest works on	*/
+#define CONFIG_SYS_MEMTEST_END		0x0C00000	/* 4 ... 12 MB in DRAM	*/
 
-#define CFG_LOAD_ADDR		0x100000	/* default load address */
-#define CFG_EXTBDINFO		1	/* To use extended board_into (bd_t) */
 
-#define CFG_HZ		1000		/* decrementer freq: 1 ms ticks */
-
-#define CONFIG_CMDLINE_EDITING	1	/* add command line history	*/
-#define CONFIG_LOOPW            1       /* enable loopw command         */
-#define CONFIG_VERSION_VARIABLE 1	/* include version env variable */
+#define CONFIG_SYS_LOAD_ADDR		0x100000	/* default load address */
 
 /*-----------------------------------------------------------------------
  * External Bus Controller (EBC) Setup
  */
 
-#define CFG_EBC_CFG            0x98400000
+#define CONFIG_SYS_EBC_CFG            0x98400000
 
 /* Memory Bank 0 (Flash Bank 0) initialization	*/
-#define CFG_EBC_PB0AP		0x02005400
-#define CFG_EBC_PB0CR		0xFFF18000  /* BAS=0xFFF,BS=1MB,BU=R/W,BW=8bit*/
+#define CONFIG_SYS_EBC_PB0AP		0x02005400
+#define CONFIG_SYS_EBC_PB0CR		0xFFF18000  /* BAS=0xFFF,BS=1MB,BU=R/W,BW=8bit*/
 
-#define CFG_EBC_PB1AP		0x03041200
-#define CFG_EBC_PB1CR		0x7009A000  /* BAS=,BS=MB,BU=R/W,BW=bit	*/
+#define CONFIG_SYS_EBC_PB1AP		0x03041200
+#define CONFIG_SYS_EBC_PB1CR		0x7009A000  /* BAS=,BS=MB,BU=R/W,BW=bit	*/
 
-#define CFG_EBC_PB2AP		0x01845200u  /* BAS=,BS=MB,BU=R/W,BW=bit */
-#define CFG_EBC_PB2CR		0x7A09A000u
+#define CONFIG_SYS_EBC_PB2AP		0x01845200u  /* BAS=,BS=MB,BU=R/W,BW=bit */
+#define CONFIG_SYS_EBC_PB2CR		0x7A09A000u
 
-#define CFG_EBC_PB3AP		0x01845200u  /* BAS=,BS=MB,BU=R/W,BW=bit */
-#define CFG_EBC_PB3CR		0x7B09A000u
+#define CONFIG_SYS_EBC_PB3AP		0x01845200u  /* BAS=,BS=MB,BU=R/W,BW=bit */
+#define CONFIG_SYS_EBC_PB3CR		0x7B09A000u
 
-#define CFG_EBC_PB4AP		0x01845200u  /* BAS=,BS=MB,BU=R/W,BW=bit */
-#define CFG_EBC_PB4CR		0x7C09A000u
+#define CONFIG_SYS_EBC_PB4AP		0x01845200u  /* BAS=,BS=MB,BU=R/W,BW=bit */
+#define CONFIG_SYS_EBC_PB4CR		0x7C09A000u
 
-#define CFG_EBC_PB5AP		0x00800200u
-#define CFG_EBC_PB5CR		0x7D81A000u
+#define CONFIG_SYS_EBC_PB5AP		0x00800200u
+#define CONFIG_SYS_EBC_PB5CR		0x7D81A000u
 
-#define CFG_EBC_PB6AP		0x01040200u
-#define CFG_EBC_PB6CR		0x7D91A000u
+#define CONFIG_SYS_EBC_PB6AP		0x01040200u
+#define CONFIG_SYS_EBC_PB6CR		0x7D91A000u
 
-#define CFG_GPIO0_OR		0x087FFFFF  /* GPIO value */
-#define CFG_GPIO0_TCR		0x7FFF8000  /* GPIO value */
-#define CFG_GPIO0_ODR		0xFFFF0000  /* GPIO value */
+#define CONFIG_SYS_GPIO0_OR		0x087FFFFF  /* GPIO value */
+#define CONFIG_SYS_GPIO0_TCR		0x7FFF8000  /* GPIO value */
+#define CONFIG_SYS_GPIO0_ODR		0xFFFF0000  /* GPIO value */
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define CFG_BOOTMAPSZ		(8 << 20) /* Initial Memory map for Linux */
+#define CONFIG_SYS_BOOTMAPSZ		(8 << 20) /* Initial Memory map for Linux */
 
 /* Init Memory Controller:
  *
  * BR0/1 and OR0/1 (FLASH)
  */
 
-#define FLASH_BASE0_PRELIM	CFG_FLASH_BASE	/* FLASH bank #0	*/
+#define FLASH_BASE0_PRELIM	CONFIG_SYS_FLASH_BASE	/* FLASH bank #0	*/
 #define FLASH_BASE1_PRELIM	0		/* FLASH bank #1	*/
 
 
 /* Configuration Port location */
 #define CONFIG_PORT_ADDR	0xF0000500
 
-#define CFG_HUSH_PARSER                 /* use "hush" command parser    */
-#ifdef  CFG_HUSH_PARSER
-#define CFG_PROMPT_HUSH_PS2	"> "
+#define CONFIG_SYS_HUSH_PARSER                 /* use "hush" command parser    */
+#ifdef  CONFIG_SYS_HUSH_PARSER
+#define CONFIG_SYS_PROMPT_HUSH_PS2	"> "
 #endif
 
 #if defined(CONFIG_CMD_KGDB)
@@ -354,8 +285,4 @@
 #define CONFIG_KGDB_SER_INDEX	2	    /* which serial port to use */
 #endif
 
-/* pass open firmware flat tree */
-#define CONFIG_OF_LIBFDT	1
-#define CONFIG_OF_BOARD_SETUP	1
-
 #endif	/* __CONFIG_H */
diff --git a/include/configs/mecp5200.h b/include/configs/mecp5200.h
index 75040fece..7ef5bdfd9 100644
--- a/include/configs/mecp5200.h
+++ b/include/configs/mecp5200.h
@@ -45,7 +45,7 @@
 #define CONFIG_MECP5200		1	/* ... on MECP5200  board */
 #define CONFIG_MPC5200_DDR      1       /* ... use DDR RAM      */
 
-#define CFG_MPC5XXX_CLKIN	33000000 /* ... running at 33.000000MHz */
+#define CONFIG_SYS_MPC5XXX_CLKIN	33000000 /* ... running at 33.000000MHz */
 
 #define BOOTFLAG_COLD		0x01	/* Normal Power-On: Boot from FLASH  */
 #define BOOTFLAG_WARM		0x02	/* Software reboot	     */
@@ -61,7 +61,7 @@
 #else
 #define CONFIG_BAUDRATE		9600	/* ... at 115200 bps */
 #endif
-#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
 
 
 #ifdef CONFIG_MPC5200	/* MPC5100 PCI is not supported yet. */
@@ -70,7 +70,7 @@
 #if 0 /* test-only !!! */
 #define CONFIG_NET_MULTI	1
 #define CONFIG_EEPRO100		1
-#define CFG_RX_ETH_BUFFER	8  /* use 8 rx buffer on eepro100  */
+#define CONFIG_SYS_RX_ETH_BUFFER	8  /* use 8 rx buffer on eepro100  */
 #define CONFIG_NS8382X		1
 #endif
 
@@ -113,12 +113,12 @@
 
 
 #if (TEXT_BASE == 0xFF000000)		/* Boot low with 16 MB Flash */
-#   define CFG_LOWBOOT		1
-#   define CFG_LOWBOOT16	1
+#   define CONFIG_SYS_LOWBOOT		1
+#   define CONFIG_SYS_LOWBOOT16	1
 #endif
 #if (TEXT_BASE == 0xFF800000)		/* Boot low with  8 MB Flash */
-#   define CFG_LOWBOOT		1
-#   define CFG_LOWBOOT08	1
+#   define CONFIG_SYS_LOWBOOT		1
+#   define CONFIG_SYS_LOWBOOT08	1
 #endif
 
 /*
@@ -156,88 +156,88 @@
 /*
  * IPB Bus clocking configuration.
  */
-#undef CFG_IPBSPEED_133			/* define for 133MHz speed */
+#undef CONFIG_SYS_IPBSPEED_133			/* define for 133MHz speed */
 #endif
 /*
  * I2C configuration
  */
 #define CONFIG_HARD_I2C		1	/* I2C with hardware support */
-#define CFG_I2C_MODULE		2	/* Select I2C module #1 or #2 */
+#define CONFIG_SYS_I2C_MODULE		2	/* Select I2C module #1 or #2 */
 
-#define CFG_I2C_SPEED		86000 /* 100 kHz */
-#define CFG_I2C_SLAVE		0x7F
+#define CONFIG_SYS_I2C_SPEED		86000 /* 100 kHz */
+#define CONFIG_SYS_I2C_SLAVE		0x7F
 
 /*
  * EEPROM configuration
  */
-#define CFG_I2C_EEPROM_ADDR		0x50	/* 1010000x */
-#define CFG_I2C_EEPROM_ADDR_LEN		2
-#define CFG_EEPROM_PAGE_WRITE_BITS	5
-#define CFG_EEPROM_PAGE_WRITE_DELAY_MS	20
-#define CFG_I2C_MULTI_EEPROMS		1
+#define CONFIG_SYS_I2C_EEPROM_ADDR		0x50	/* 1010000x */
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN		2
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS	5
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	20
+#define CONFIG_SYS_I2C_MULTI_EEPROMS		1
 /*
  * Flash configuration
  */
-#define CFG_FLASH_BASE		0xFFC00000
-#define CFG_FLASH_SIZE		0x00400000
-#define CFG_ENV_ADDR		(CFG_FLASH_BASE + 0x003E0000)
-#define CFG_MAX_FLASH_BANKS	1	/* max num of memory banks      */
-#define CFG_MAX_FLASH_SECT	512
+#define CONFIG_SYS_FLASH_BASE		0xFFC00000
+#define CONFIG_SYS_FLASH_SIZE		0x00400000
+#define CONFIG_ENV_ADDR		(CONFIG_SYS_FLASH_BASE + 0x003E0000)
+#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max num of memory banks      */
+#define CONFIG_SYS_MAX_FLASH_SECT	512
 
-#define CFG_FLASH_ERASE_TOUT	240000	/* Flash Erase Timeout (in ms)  */
-#define CFG_FLASH_WRITE_TOUT	500	/* Flash Write Timeout (in ms)  */
+#define CONFIG_SYS_FLASH_ERASE_TOUT	240000	/* Flash Erase Timeout (in ms)  */
+#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Flash Write Timeout (in ms)  */
 
 /*
  * Environment settings
  */
 #if 1 /* test-only */
-#define CFG_ENV_IS_IN_FLASH	1
-#define CFG_ENV_SIZE		0x10000
-#define CFG_ENV_SECT_SIZE	0x10000
+#define CONFIG_ENV_IS_IN_FLASH	1
+#define CONFIG_ENV_SIZE		0x10000
+#define CONFIG_ENV_SECT_SIZE	0x10000
 #define CONFIG_ENV_OVERWRITE	1
 #else
-#define CFG_ENV_IS_IN_EEPROM	1	/* use EEPROM for environment vars */
-#define CFG_ENV_OFFSET		0x0000	/* environment starts at the beginning of the EEPROM */
-#define CFG_ENV_SIZE		0x0400	/* 8192 bytes may be used for env vars*/
+#define CONFIG_ENV_IS_IN_EEPROM	1	/* use EEPROM for environment vars */
+#define CONFIG_ENV_OFFSET		0x0000	/* environment starts at the beginning of the EEPROM */
+#define CONFIG_ENV_SIZE		0x0400	/* 8192 bytes may be used for env vars*/
 				   /* total size of a CAT24WC32 is 8192 bytes */
 #define CONFIG_ENV_OVERWRITE	1
 #endif
 
 #define CONFIG_FLASH_CFI_DRIVER	1	   /* Flash is CFI conformant		*/
-#define CFG_FLASH_CFI		1	   /* Flash is CFI conformant		*/
-#define CFG_FLASH_PROTECTION	1	   /* use hardware protection		*/
+#define CONFIG_SYS_FLASH_CFI		1	   /* Flash is CFI conformant		*/
+#define CONFIG_SYS_FLASH_PROTECTION	1	   /* use hardware protection		*/
 #if 0
-#define CFG_FLASH_USE_BUFFER_WRITE 1       /* use buffered writes (20x faster)  */
+#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1       /* use buffered writes (20x faster)  */
 #endif
-#define CFG_FLASH_INCREMENT	0x00400000 /* size of  flash bank		*/
-#define CFG_FLASH_BANKS_LIST  { CFG_FLASH_BASE }
-#define CFG_FLASH_EMPTY_INFO	1	   /* show if bank is empty		*/
+#define CONFIG_SYS_FLASH_INCREMENT	0x00400000 /* size of  flash bank		*/
+#define CONFIG_SYS_FLASH_BANKS_LIST  { CONFIG_SYS_FLASH_BASE }
+#define CONFIG_SYS_FLASH_EMPTY_INFO	1	   /* show if bank is empty		*/
 
 
 /*
  * Memory map
  */
-#define CFG_MBAR		0xF0000000
-#define CFG_SDRAM_BASE		0x00000000
-#define CFG_DEFAULT_MBAR	0x80000000
+#define CONFIG_SYS_MBAR		0xF0000000
+#define CONFIG_SYS_SDRAM_BASE		0x00000000
+#define CONFIG_SYS_DEFAULT_MBAR	0x80000000
 
 /* Use SRAM until RAM will be available */
-#define CFG_INIT_RAM_ADDR	MPC5XXX_SRAM
-#define CFG_INIT_RAM_END	MPC5XXX_SRAM_SIZE	/* End of used area in DPRAM */
+#define CONFIG_SYS_INIT_RAM_ADDR	MPC5XXX_SRAM
+#define CONFIG_SYS_INIT_RAM_END	MPC5XXX_SRAM_SIZE	/* End of used area in DPRAM */
 
 
-#define CFG_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
-#define CFG_MONITOR_BASE    TEXT_BASE
-#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
-#   define CFG_RAMBOOT		1
+#define CONFIG_SYS_MONITOR_BASE    TEXT_BASE
+#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
+#   define CONFIG_SYS_RAMBOOT		1
 #endif
 
-#define CFG_MONITOR_LEN		(192 << 10)	/* Reserve 192 kB for Monitor	*/
-#define CFG_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/
-#define CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
+#define CONFIG_SYS_MONITOR_LEN		(192 << 10)	/* Reserve 192 kB for Monitor	*/
+#define CONFIG_SYS_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/
+#define CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
 
 /*
  * Ethernet configuration
@@ -254,62 +254,62 @@
 /*
  * GPIO configuration
  */
-#define CFG_GPS_PORT_CONFIG	0x01052444
+#define CONFIG_SYS_GPS_PORT_CONFIG	0x01052444
 
 /*
  * Miscellaneous configurable options
  */
-#define CFG_LONGHELP			/* undef to save memory	    */
-#define CFG_PROMPT		"=> "	/* Monitor Command Prompt   */
+#define CONFIG_SYS_LONGHELP			/* undef to save memory	    */
+#define CONFIG_SYS_PROMPT		"=> "	/* Monitor Command Prompt   */
 #if defined(CONFIG_CMD_KGDB)
-#define CFG_CBSIZE		1024	/* Console I/O Buffer Size  */
+#define CONFIG_SYS_CBSIZE		1024	/* Console I/O Buffer Size  */
 #else
-#define CFG_CBSIZE		256	/* Console I/O Buffer Size  */
+#define CONFIG_SYS_CBSIZE		256	/* Console I/O Buffer Size  */
 #endif
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16)	/* Print Buffer Size */
-#define CFG_MAXARGS		16		/* max number of command args	*/
-#define CFG_BARGSIZE		CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)	/* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS		16		/* max number of command args	*/
+#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
 
-#define CFG_MEMTEST_START	0x00100000	/* memtest works on */
-#define CFG_MEMTEST_END		0x00f00000	/* 1 ... 15 MB in DRAM	*/
+#define CONFIG_SYS_MEMTEST_START	0x00100000	/* memtest works on */
+#define CONFIG_SYS_MEMTEST_END		0x00f00000	/* 1 ... 15 MB in DRAM	*/
 
-#define CFG_LOAD_ADDR		0x100000	/* default load address */
+#define CONFIG_SYS_LOAD_ADDR		0x100000	/* default load address */
 
-#define CFG_HZ			1000		/* decrementer freq: 1 ms ticks */
+#define CONFIG_SYS_HZ			1000		/* decrementer freq: 1 ms ticks */
 
-#define CFG_VXWORKS_MAC_PTR	0x00000000	/* Pass Ethernet MAC to VxWorks */
+#define CONFIG_SYS_VXWORKS_MAC_PTR	0x00000000	/* Pass Ethernet MAC to VxWorks */
 
-#define CFG_CACHELINE_SIZE	32	/* For MPC5xxx CPUs */
+#define CONFIG_SYS_CACHELINE_SIZE	32	/* For MPC5xxx CPUs */
 #if defined(CONFIG_CMD_KGDB)
-#  define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value */
+#  define CONFIG_SYS_CACHELINE_SHIFT	5	/* log base 2 of the above value */
 #endif
 
 /*
  * Various low-level settings
  */
 #if defined(CONFIG_MPC5200)
-#define CFG_HID0_INIT		HID0_ICE | HID0_ICFI
-#define CFG_HID0_FINAL		HID0_ICE
+#define CONFIG_SYS_HID0_INIT		HID0_ICE | HID0_ICFI
+#define CONFIG_SYS_HID0_FINAL		HID0_ICE
 #else
-#define CFG_HID0_INIT		0
-#define CFG_HID0_FINAL		0
+#define CONFIG_SYS_HID0_INIT		0
+#define CONFIG_SYS_HID0_FINAL		0
 #endif
 
-#define CFG_BOOTCS_START	CFG_FLASH_BASE
-#define CFG_BOOTCS_SIZE		CFG_FLASH_SIZE
-#define CFG_BOOTCS_CFG		0x00085d00
+#define CONFIG_SYS_BOOTCS_START	CONFIG_SYS_FLASH_BASE
+#define CONFIG_SYS_BOOTCS_SIZE		CONFIG_SYS_FLASH_SIZE
+#define CONFIG_SYS_BOOTCS_CFG		0x00085d00
 
-#define CFG_CS0_START		CFG_FLASH_BASE
-#define CFG_CS0_SIZE		CFG_FLASH_SIZE
+#define CONFIG_SYS_CS0_START		CONFIG_SYS_FLASH_BASE
+#define CONFIG_SYS_CS0_SIZE		CONFIG_SYS_FLASH_SIZE
 
-#define CFG_CS1_START		0xfd000000
-#define CFG_CS1_SIZE		0x00010000
-#define CFG_CS1_CFG		0x10101410
+#define CONFIG_SYS_CS1_START		0xfd000000
+#define CONFIG_SYS_CS1_SIZE		0x00010000
+#define CONFIG_SYS_CS1_CFG		0x10101410
 
-#define CFG_CS_BURST		0x00000000
-#define CFG_CS_DEADCYCLE	0x33333333
+#define CONFIG_SYS_CS_BURST		0x00000000
+#define CONFIG_SYS_CS_DEADCYCLE	0x33333333
 
-#define CFG_RESET_ADDRESS	0xff000000
+#define CONFIG_SYS_RESET_ADDRESS	0xff000000
 
 /*-----------------------------------------------------------------------
  * USB stuff
@@ -331,23 +331,23 @@
 #define	CONFIG_IDE_RESET		/* reset for ide supported	*/
 #define CONFIG_IDE_PREINIT
 
-#define CFG_IDE_MAXBUS		1	/* max. 1 IDE bus		*/
-#define CFG_IDE_MAXDEVICE	1	/* max. 1 drive per IDE bus	*/
+#define CONFIG_SYS_IDE_MAXBUS		1	/* max. 1 IDE bus		*/
+#define CONFIG_SYS_IDE_MAXDEVICE	1	/* max. 1 drive per IDE bus	*/
 
-#define CFG_ATA_IDE0_OFFSET	0x0000
+#define CONFIG_SYS_ATA_IDE0_OFFSET	0x0000
 
-#define CFG_ATA_BASE_ADDR	MPC5XXX_ATA
+#define CONFIG_SYS_ATA_BASE_ADDR	MPC5XXX_ATA
 
 /* Offset for data I/O			*/
-#define CFG_ATA_DATA_OFFSET	(0x0060)
+#define CONFIG_SYS_ATA_DATA_OFFSET	(0x0060)
 
 /* Offset for normal register accesses	*/
-#define CFG_ATA_REG_OFFSET	(CFG_ATA_DATA_OFFSET)
+#define CONFIG_SYS_ATA_REG_OFFSET	(CONFIG_SYS_ATA_DATA_OFFSET)
 
 /* Offset for alternate registers	*/
-#define CFG_ATA_ALT_OFFSET	(0x005C)
+#define CONFIG_SYS_ATA_ALT_OFFSET	(0x005C)
 
 /* Interval between registers		*/
-#define CFG_ATA_STRIDE		4
+#define CONFIG_SYS_ATA_STRIDE		4
 
 #endif /* __CONFIG_H */
diff --git a/include/configs/mgcoge.h b/include/configs/mgcoge.h
index 5fe3075ef..dc9b311d4 100644
--- a/include/configs/mgcoge.h
+++ b/include/configs/mgcoge.h
@@ -66,9 +66,9 @@
 #undef	CONFIG_ETHER_NONE		/* No external Ethernet   */
 
 #define CONFIG_ETHER_INDEX	4
-#define CFG_SCC_TOUT_LOOP	10000000
+#define CONFIG_SYS_SCC_TOUT_LOOP	10000000
 
-# define CFG_CMXSCR_VALUE	(CMXSCR_RS4CS_CLK7 | CMXSCR_TS4CS_CLK8)
+# define CONFIG_SYS_CMXSCR_VALUE	(CMXSCR_RS4CS_CLK7 | CMXSCR_TS4CS_CLK8)
 
 #ifndef CONFIG_8260_CLKIN
 #define CONFIG_8260_CLKIN	66000000	/* in Hz */
@@ -76,12 +76,17 @@
 
 #define CONFIG_BAUDRATE		115200
 
+#define CONFIG_BOOTCOUNT_LIMIT
+
 /*
  * Command line configuration.
  */
 #include <config_cmd_default.h>
 
+#define CONFIG_CMD_DTT
 #define CONFIG_CMD_ECHO
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_I2C
 #define CONFIG_CMD_IMMAP
 #define CONFIG_CMD_MII
 #define CONFIG_CMD_PING
@@ -127,102 +132,154 @@
 /*
  * Miscellaneous configurable options
  */
-#define CFG_HUSH_PARSER
-#define CFG_PROMPT_HUSH_PS2	"> "
-#define CFG_LONGHELP			/* undef to save memory	    */
-#define CFG_PROMPT		"=> "	/* Monitor Command Prompt   */
+#define CONFIG_SYS_HUSH_PARSER
+#define CONFIG_SYS_PROMPT_HUSH_PS2	"> "
+#define CONFIG_SYS_LONGHELP			/* undef to save memory	    */
+#define CONFIG_SYS_PROMPT		"=> "	/* Monitor Command Prompt   */
+#define CONFIG_HUSH_INIT_VAR	1
 #if defined(CONFIG_CMD_KGDB)
-#define CFG_CBSIZE		1024	/* Console I/O Buffer Size  */
+#define CONFIG_SYS_CBSIZE		1024	/* Console I/O Buffer Size  */
 #else
-#define CFG_CBSIZE		256	/* Console I/O Buffer Size  */
+#define CONFIG_SYS_CBSIZE		256	/* Console I/O Buffer Size  */
 #endif
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16)	/* Print Buffer Size  */
-#define CFG_MAXARGS		16		/* max number of command args */
-#define CFG_BARGSIZE		CFG_CBSIZE	/* Boot Argument Buffer Size  */
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)	/* Print Buffer Size  */
+#define CONFIG_SYS_MAXARGS		16		/* max number of command args */
+#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size  */
 
-#define CFG_MEMTEST_START	0x00100000	/* memtest works on */
-#define CFG_MEMTEST_END		0x00f00000	/* 1 ... 15 MB in DRAM	*/
+#define CONFIG_SYS_MEMTEST_START	0x00100000	/* memtest works on */
+#define CONFIG_SYS_MEMTEST_END		0x00f00000	/* 1 ... 15 MB in DRAM	*/
 
-#define CFG_LOAD_ADDR		0x100000	/* default load address */
+#define CONFIG_SYS_LOAD_ADDR		0x100000	/* default load address */
 
-#define CFG_HZ			1000	/* decrementer freq: 1 ms ticks */
+#define CONFIG_SYS_HZ			1000	/* decrementer freq: 1 ms ticks */
 
-#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
 
-#define CFG_SDRAM_BASE		0x00000000
-#define CFG_FLASH_BASE		0xFE000000
-#define CFG_FLASH_SIZE		32
-#define CFG_FLASH_CFI
+#define CONFIG_SYS_SDRAM_BASE		0x00000000
+#define CONFIG_SYS_FLASH_BASE		0xFE000000
+#define CONFIG_SYS_FLASH_SIZE		32
+#define CONFIG_SYS_FLASH_CFI
 #define CONFIG_FLASH_CFI_DRIVER
-#define CFG_MAX_FLASH_BANKS	2	/* max num of flash banks	*/
-#define CFG_MAX_FLASH_SECT	512	/* max num of sects on one chip */
+#define CONFIG_SYS_MAX_FLASH_BANKS	2	/* max num of flash banks	*/
+#define CONFIG_SYS_MAX_FLASH_SECT	512	/* max num of sects on one chip */
 
-#define CFG_FLASH_BASE_1	0x50000000
-#define CFG_FLASH_SIZE_1	64
+#define CONFIG_SYS_FLASH_BASE_1	0x50000000
+#define CONFIG_SYS_FLASH_SIZE_1	64
 
-#define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE, CFG_FLASH_BASE_1 }
+#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE_1 }
 
-#define CFG_MONITOR_BASE	TEXT_BASE
-#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
-#define CFG_RAMBOOT
+#define CONFIG_SYS_MONITOR_BASE	TEXT_BASE
+#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
+#define CONFIG_SYS_RAMBOOT
 #endif
 
-#define CFG_MONITOR_LEN		(256 << 10)	/* Reserve 256KB for Monitor */
+#define CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 256KB for Monitor */
+
+#define CONFIG_ENV_IS_IN_FLASH
+
+#ifdef CONFIG_ENV_IS_IN_FLASH
+#define CONFIG_ENV_SECT_SIZE	0x20000
+#define CONFIG_ENV_ADDR		(CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)
+#define CONFIG_ENV_OFFSET	CONFIG_SYS_MONITOR_LEN
 
-#define CFG_ENV_IS_IN_FLASH
+/* Address and size of Redundant Environment Sector	*/
+#define CONFIG_ENV_OFFSET_REDUND	(CONFIG_ENV_OFFSET + CONFIG_ENV_SECT_SIZE)
+#define CONFIG_ENV_SIZE_REDUND		(CONFIG_ENV_SIZE)
+#endif /* CONFIG_ENV_IS_IN_FLASH */
 
-#ifdef CFG_ENV_IS_IN_FLASH
-#define CFG_ENV_SECT_SIZE	0x20000
-#define CFG_ENV_ADDR		(CFG_MONITOR_BASE + CFG_MONITOR_LEN)
-#endif /* CFG_ENV_IS_IN_FLASH */
+/* enable I2C and select the hardware/software driver */
+#undef	CONFIG_HARD_I2C			/* I2C with hardware support	*/
+#define	CONFIG_SOFT_I2C		1	/* I2C bit-banged		*/
+#define CONFIG_SYS_I2C_SPEED		50000	/* I2C speed and slave address	*/
+#define CONFIG_SYS_I2C_SLAVE		0x7F
 
-#define CFG_IMMR		0xF0000000
+/*
+ * Software (bit-bang) I2C driver configuration
+ */
 
-#define CFG_INIT_RAM_ADDR	CFG_IMMR
-#define CFG_INIT_RAM_END	0x2000	/* End of used area in DPRAM	*/
-#define CFG_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+#define I2C_PORT	3		/* Port A=0, B=1, C=2, D=3 */
+#define I2C_ACTIVE	(iop->pdir |=  0x00010000)
+#define I2C_TRISTATE	(iop->pdir &= ~0x00010000)
+#define I2C_READ	((iop->pdat & 0x00010000) != 0)
+#define I2C_SDA(bit)	if(bit) iop->pdat |=  0x00010000; \
+			else    iop->pdat &= ~0x00010000
+#define I2C_SCL(bit)	if(bit) iop->pdat |=  0x00020000; \
+			else    iop->pdat &= ~0x00020000
+#define I2C_DELAY	udelay(5)	/* 1/4 I2C clock duration */
+
+#define CONFIG_I2C_MULTI_BUS	1
+#define CONFIG_I2C_CMD_TREE	1
+#define CONFIG_SYS_MAX_I2C_BUS		2
+#define CONFIG_SYS_I2C_INIT_BOARD	1
+#define CONFIG_I2C_MUX		1
+
+/* EEprom support */
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN	1
+#define CONFIG_SYS_I2C_MULTI_EEPROMS	1
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_ENABLE
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10
+
+/* Support the IVM EEprom */
+#define	CONFIG_SYS_IVM_EEPROM_ADR	0x50
+#define CONFIG_SYS_IVM_EEPROM_MAX_LEN	0x400
+#define CONFIG_SYS_IVM_EEPROM_PAGE_LEN	0x100
+
+/* I2C SYSMON (LM75, AD7414 is almost compatible)			*/
+#define CONFIG_DTT_LM75		1	/* ON Semi's LM75		*/
+#define CONFIG_DTT_SENSORS	{0}	/* Sensor addresses		*/
+#define CONFIG_SYS_DTT_MAX_TEMP	70
+#define CONFIG_SYS_DTT_LOW_TEMP	-30
+#define CONFIG_SYS_DTT_HYSTERESIS	3
+#define CONFIG_SYS_DTT_BUS_NUM		(CONFIG_SYS_MAX_I2C_BUS)
+
+#define CONFIG_SYS_IMMR		0xF0000000
+
+#define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_IMMR
+#define CONFIG_SYS_INIT_RAM_END	0x2000	/* End of used area in DPRAM	*/
+#define CONFIG_SYS_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
 /* Hard reset configuration word */
-#define CFG_HRCW_MASTER		0x0604b211
+#define CONFIG_SYS_HRCW_MASTER		0x0604b211
 
 /* No slaves */
-#define CFG_HRCW_SLAVE1		0
-#define CFG_HRCW_SLAVE2		0
-#define CFG_HRCW_SLAVE3		0
-#define CFG_HRCW_SLAVE4		0
-#define CFG_HRCW_SLAVE5		0
-#define CFG_HRCW_SLAVE6		0
-#define CFG_HRCW_SLAVE7		0
+#define CONFIG_SYS_HRCW_SLAVE1		0
+#define CONFIG_SYS_HRCW_SLAVE2		0
+#define CONFIG_SYS_HRCW_SLAVE3		0
+#define CONFIG_SYS_HRCW_SLAVE4		0
+#define CONFIG_SYS_HRCW_SLAVE5		0
+#define CONFIG_SYS_HRCW_SLAVE6		0
+#define CONFIG_SYS_HRCW_SLAVE7		0
 
 #define BOOTFLAG_COLD		0x01	/* Normal Power-On: Boot from FLASH */
 #define BOOTFLAG_WARM		0x02	/* Software reboot                  */
 
-#define CFG_MALLOC_LEN		(4096 << 10)	/* Reserve 4 MB for malloc()	*/
-#define CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
+#define CONFIG_SYS_MALLOC_LEN		(4096 << 10)	/* Reserve 4 MB for malloc()	*/
+#define CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
 
-#define CFG_CACHELINE_SIZE	32	/* For MPC8260 CPUs */
+#define CONFIG_SYS_CACHELINE_SIZE	32	/* For MPC8260 CPUs */
 #if defined(CONFIG_CMD_KGDB)
-#  define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value */
+#  define CONFIG_SYS_CACHELINE_SHIFT	5	/* log base 2 of the above value */
 #endif
 
-#define CFG_HID0_INIT		0
-#define CFG_HID0_FINAL		(HID0_ICE | HID0_IFEM | HID0_ABE)
+#define CONFIG_SYS_HID0_INIT		0
+#define CONFIG_SYS_HID0_FINAL		(HID0_ICE | HID0_IFEM | HID0_ABE)
 
-#define CFG_HID2		0
+#define CONFIG_SYS_HID2		0
 
-#define CFG_SIUMCR		0x4020c200
-#define CFG_SYPCR		0xFFFFFFC3
-#define CFG_BCR			0x10000000
-#define CFG_SCCR		(SCCR_PCI_MODE | SCCR_PCI_MODCK)
+#define CONFIG_SYS_SIUMCR		0x4020c200
+#define CONFIG_SYS_SYPCR		0xFFFFFFC3
+#define CONFIG_SYS_BCR			0x10000000
+#define CONFIG_SYS_SCCR		(SCCR_PCI_MODE | SCCR_PCI_MODCK)
 
 /*-----------------------------------------------------------------------
  * RMR - Reset Mode Register                                     5-5
  *-----------------------------------------------------------------------
  * turn on Checkstop Reset Enable
  */
-#define CFG_RMR         0
+#define CONFIG_SYS_RMR         0
 
 /*-----------------------------------------------------------------------
  * TMCNTSC - Time Counter Status and Control                     4-40
@@ -230,7 +287,7 @@
  * Clear once per Second and Alarm Interrupt Status, Set 32KHz timersclk,
  * and enable Time Counter
  */
-#define CFG_TMCNTSC     (TMCNTSC_SEC|TMCNTSC_ALR|TMCNTSC_TCF|TMCNTSC_TCE)
+#define CONFIG_SYS_TMCNTSC     (TMCNTSC_SEC|TMCNTSC_ALR|TMCNTSC_TCF|TMCNTSC_TCE)
 
 /*-----------------------------------------------------------------------
  * PISCR - Periodic Interrupt Status and Control                 4-42
@@ -238,13 +295,13 @@
  * Clear Periodic Interrupt Status, Set 32KHz timersclk, and enable
  * Periodic timer
  */
-#define CFG_PISCR       (PISCR_PS|PISCR_PTF|PISCR_PTE)
+#define CONFIG_SYS_PISCR       (PISCR_PS|PISCR_PTF|PISCR_PTE)
 
 /*-----------------------------------------------------------------------
  * RCCR - RISC Controller Configuration                         13-7
  *-----------------------------------------------------------------------
  */
-#define CFG_RCCR        0
+#define CONFIG_SYS_RCCR        0
 
 /*
  * Init Memory Controller:
@@ -259,12 +316,12 @@
  */
 /* Bank 0 - FLASH
  */
-#define CFG_BR0_PRELIM  ((CFG_FLASH_BASE & BRx_BA_MSK)	|\
+#define CONFIG_SYS_BR0_PRELIM  ((CONFIG_SYS_FLASH_BASE & BRx_BA_MSK)	|\
 			 BRx_PS_8			|\
 			 BRx_MS_GPCM_P			|\
 			 BRx_V)
 
-#define CFG_OR0_PRELIM  (MEG_TO_AM(CFG_FLASH_SIZE)	|\
+#define CONFIG_SYS_OR0_PRELIM  (MEG_TO_AM(CONFIG_SYS_FLASH_SIZE)	|\
 			 ORxG_CSNT			|\
 			 ORxG_ACS_DIV2			|\
 			 ORxG_SCY_5_CLK			|\
@@ -274,33 +331,33 @@
 /* Bank 1 - 60x bus SDRAM
  */
 #define SDRAM_MAX_SIZE	0x08000000	/* max. 128 MB		*/
-#define CFG_GLOBAL_SDRAM_LIMIT	(256 << 20)	/* less than 256 MB */
+#define CONFIG_SYS_GLOBAL_SDRAM_LIMIT	(256 << 20)	/* less than 256 MB */
 
-#define CFG_MPTPR       0x1800
+#define CONFIG_SYS_MPTPR       0x1800
 
 /*-----------------------------------------------------------------------------
  * Address for Mode Register Set (MRS) command
  *-----------------------------------------------------------------------------
  */
-#define CFG_MRS_OFFS	0x00000110
-#define CFG_PSRT        0x0e
+#define CONFIG_SYS_MRS_OFFS	0x00000110
+#define CONFIG_SYS_PSRT        0x0e
 
-#define CFG_BR1_PRELIM  ((CFG_SDRAM_BASE & BRx_BA_MSK)  |\
+#define CONFIG_SYS_BR1_PRELIM  ((CONFIG_SYS_SDRAM_BASE & BRx_BA_MSK)  |\
 			 BRx_PS_64                      |\
 			 BRx_MS_SDRAM_P                 |\
 			 BRx_V)
 
-#define CFG_OR1_PRELIM	CFG_OR1
+#define CONFIG_SYS_OR1_PRELIM	CONFIG_SYS_OR1
 
 /* SDRAM initialization values
 */
 
-#define CFG_OR1    ((~(CFG_GLOBAL_SDRAM_LIMIT-1) & ORxS_SDAM_MSK) |\
+#define CONFIG_SYS_OR1    ((~(CONFIG_SYS_GLOBAL_SDRAM_LIMIT-1) & ORxS_SDAM_MSK) |\
 			 ORxS_BPD_8                     |\
 			 ORxS_ROWST_PBI0_A7		|\
 			 ORxS_NUMR_13)
 
-#define CFG_PSDMR  (PSDMR_SDAM_A14_IS_A5 |\
+#define CONFIG_SYS_PSDMR  (PSDMR_SDAM_A14_IS_A5 |\
 			 PSDMR_BSMA_A14_A16           |\
 			 PSDMR_SDA10_PBI0_A9		|\
 			 PSDMR_RFRC_5_CLK               |\
@@ -312,28 +369,29 @@
 
 /* GPIO/PIGGY on CS3 initialization values
 */
-#define CFG_PIGGY_BASE	0x30000000
-#define CFG_PIGGY_SIZE	128
+#define CONFIG_SYS_PIGGY_BASE	0x30000000
+#define CONFIG_SYS_PIGGY_SIZE	128
 
-#define CFG_BR3_PRELIM	((CFG_PIGGY_BASE & BRx_BA_MSK) |\
+#define CONFIG_SYS_BR3_PRELIM	((CONFIG_SYS_PIGGY_BASE & BRx_BA_MSK) |\
 			 BRx_PS_8 | BRx_MS_GPCM_P | BRx_V)
 
-#define CFG_OR3_PRELIM	(MEG_TO_AM(CFG_PIGGY_SIZE) |\
+#define CONFIG_SYS_OR3_PRELIM	(MEG_TO_AM(CONFIG_SYS_PIGGY_SIZE) |\
 			 ORxG_CSNT | ORxG_ACS_DIV2 |\
 			 ORxG_SCY_3_CLK | ORxG_TRLX )
 
 /* CFG-Flash on CS5 initialization values
 */
-#define CFG_BR5_PRELIM	((CFG_FLASH_BASE_1 & BRx_BA_MSK) |\
+#define CONFIG_SYS_BR5_PRELIM	((CONFIG_SYS_FLASH_BASE_1 & BRx_BA_MSK) |\
 			 BRx_PS_16 | BRx_MS_GPCM_P | BRx_V)
 
-#define CFG_OR5_PRELIM	(MEG_TO_AM(CFG_FLASH_SIZE_1) |\
+#define CONFIG_SYS_OR5_PRELIM	(MEG_TO_AM(CONFIG_SYS_FLASH_SIZE_1) |\
 			 ORxG_CSNT | ORxG_ACS_DIV2 |\
 			 ORxG_SCY_5_CLK | ORxG_TRLX )
 
-#define	CFG_RESET_ADDRESS 0xFDFFFFFC	/* "bad" address		*/
+#define	CONFIG_SYS_RESET_ADDRESS 0xFDFFFFFC	/* "bad" address		*/
 
 /* pass open firmware flat tree */
+#define CONFIG_FIT		1
 #define CONFIG_OF_LIBFDT	1
 #define CONFIG_OF_BOARD_SETUP	1
 
diff --git a/include/configs/mgsuvd.h b/include/configs/mgsuvd.h
index 6f1c640b1..fca2e5513 100644
--- a/include/configs/mgsuvd.h
+++ b/include/configs/mgsuvd.h
@@ -41,13 +41,15 @@
 
 #define CONFIG_8xx_GCLK_FREQ		66000000
 
-#define CFG_SMC_UCODE_PATCH	1	/* Relocate SMC1 */
-#define CFG_SMC_DPMEM_OFFSET	0x1fc0
+#define CONFIG_SYS_SMC_UCODE_PATCH	1	/* Relocate SMC1 */
+#define CONFIG_SYS_SMC_DPMEM_OFFSET	0x1fc0
 #define CONFIG_8xx_CONS_SMC1	1	/* Console is on SMC1		*/
 
 #define CONFIG_BAUDRATE		115200	/* console baudrate = 115kbps	*/
 
 #define CONFIG_BOOTCOUNT_LIMIT
+#define CONFIG_SYS_CPM_BOOTCOUNT_ADDR	0x1eb0	/* In case of SMC relocation, the
+					 * default value is not working */
 
 #define CONFIG_BOOTDELAY	5	/* autoboot after 5 seconds	*/
 
@@ -89,7 +91,7 @@
 #define CONFIG_BOOTCOMMAND	"run flash_self"
 
 #define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
-#undef	CFG_LOADS_BAUD_CHANGE		/* don't allow baudrate change	*/
+#undef	CONFIG_SYS_LOADS_BAUD_CHANGE		/* don't allow baudrate change	*/
 
 #undef	CONFIG_WATCHDOG			/* watchdog disabled		*/
 
@@ -113,38 +115,42 @@
 
 #define CONFIG_CMD_ASKENV
 #define CONFIG_CMD_DHCP
+#define CONFIG_CMD_DTT
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_I2C
 #define CONFIG_CMD_NFS
 #define CONFIG_CMD_PING
 
 /*
  * Miscellaneous configurable options
  */
-#define CFG_LONGHELP			/* undef to save memory		*/
-#define CFG_PROMPT		"=> "	/* Monitor Command Prompt	*/
+#define CONFIG_SYS_LONGHELP			/* undef to save memory		*/
+#define CONFIG_SYS_PROMPT		"=> "	/* Monitor Command Prompt	*/
 
 #define CONFIG_CMDLINE_EDITING	1	/* add command line history	*/
-#define CFG_HUSH_PARSER		1	/* Use the HUSH parser		*/
-#ifdef	CFG_HUSH_PARSER
-#define	CFG_PROMPT_HUSH_PS2	"> "
+#define CONFIG_SYS_HUSH_PARSER		1	/* Use the HUSH parser		*/
+#ifdef	CONFIG_SYS_HUSH_PARSER
+#define	CONFIG_SYS_PROMPT_HUSH_PS2	"> "
+#define CONFIG_HUSH_INIT_VAR	1
 #endif
 
 #if defined(CONFIG_CMD_KGDB)
-#define CFG_CBSIZE		1024	/* Console I/O Buffer Size	*/
+#define CONFIG_SYS_CBSIZE		1024	/* Console I/O Buffer Size	*/
 #else
-#define CFG_CBSIZE		256	/* Console I/O Buffer Size	*/
+#define CONFIG_SYS_CBSIZE		256	/* Console I/O Buffer Size	*/
 #endif
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define CFG_MAXARGS		16	/* max number of command args	*/
-#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS		16	/* max number of command args	*/
+#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
 
-#define CFG_MEMTEST_START	0x0400000	/* memtest works on	*/
-#define CFG_MEMTEST_END		0x0C00000	/* 4 ... 12 MB in DRAM	*/
+#define CONFIG_SYS_MEMTEST_START	0x0400000	/* memtest works on	*/
+#define CONFIG_SYS_MEMTEST_END		0x0C00000	/* 4 ... 12 MB in DRAM	*/
 
-#define CFG_LOAD_ADDR		0x100000	/* default load address */
+#define CONFIG_SYS_LOAD_ADDR		0x100000	/* default load address */
 
-#define CFG_HZ			1000	/* decrementer freq: 1 ms ticks */
+#define CONFIG_SYS_HZ			1000	/* decrementer freq: 1 ms ticks */
 
-#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
 
 /*
  * Low Level Configuration Settings
@@ -154,65 +160,63 @@
 /*-----------------------------------------------------------------------
  * Internal Memory Mapped Register
  */
-#define CFG_IMMR		0xFFF00000
+#define CONFIG_SYS_IMMR		0xFFF00000
 
 /*-----------------------------------------------------------------------
  * Definitions for initial stack pointer and data area (in DPRAM)
  */
-#define CFG_INIT_RAM_ADDR	CFG_IMMR
-#define CFG_INIT_RAM_END	0x2F00	/* End of used area in DPRAM	*/
-#define CFG_GBL_DATA_SIZE	64  /* size in bytes reserved for initial data */
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_IMMR
+#define CONFIG_SYS_INIT_RAM_END	0x2F00	/* End of used area in DPRAM	*/
+#define CONFIG_SYS_GBL_DATA_SIZE	64  /* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
 /*-----------------------------------------------------------------------
  * Start addresses for the final memory configuration
  * (Set up by the startup code)
- * Please note that CFG_SDRAM_BASE _must_ start at 0
+ * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
  */
-#define CFG_SDRAM_BASE		0x00000000
-#define CFG_FLASH_BASE		0xf0000000
-#define CFG_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor	*/
-#define CFG_MONITOR_BASE	CFG_FLASH_BASE
-#define CFG_MALLOC_LEN		(256 << 10)	/* Reserve 256 kB for malloc()	*/
+#define CONFIG_SYS_SDRAM_BASE		0x00000000
+#define CONFIG_SYS_FLASH_BASE		0xf0000000
+#define CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor	*/
+#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_FLASH_BASE
+#define CONFIG_SYS_MALLOC_LEN		(256 << 10)	/* Reserve 256 kB for malloc()	*/
 
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
+#define CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
 
 /*-----------------------------------------------------------------------
  * FLASH organization
  */
-#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
-#define CFG_FLASH_SIZE		32
-#define CFG_FLASH_CFI
+#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
+#define CONFIG_SYS_FLASH_SIZE		32
+#define CONFIG_SYS_FLASH_CFI
 #define CONFIG_FLASH_CFI_DRIVER
-#define CFG_MAX_FLASH_SECT	256	/* max num of sects on one chip */
+#define CONFIG_SYS_MAX_FLASH_SECT	256	/* max num of sects on one chip */
 
 
-#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
-#define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
+#define CONFIG_SYS_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
+#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
 
-#define CFG_ENV_IS_IN_FLASH	1
-#define CFG_ENV_OFFSET		0x40000 /*   Offset   of Environment Sector	*/
-#define CFG_ENV_SIZE		0x08000 /* Total Size of Environment Sector	*/
-#define CFG_ENV_SECT_SIZE	0x40000 /* Total Size of Environment Sector	*/
+#define CONFIG_ENV_IS_IN_FLASH	1
+#define CONFIG_ENV_OFFSET		0x40000 /*   Offset   of Environment Sector	*/
+#define CONFIG_ENV_SIZE		0x08000 /* Total Size of Environment Sector	*/
+#define CONFIG_ENV_SECT_SIZE	0x20000 /* Total Size of Environment Sector	*/
 
 /* Address and size of Redundant Environment Sector	*/
-#define CFG_ENV_OFFSET_REDUND	(CFG_ENV_OFFSET+CFG_ENV_SECT_SIZE)
-#define CFG_ENV_SIZE_REDUND	(CFG_ENV_SIZE)
-
-#define	CFG_USE_PPCENV			/* Environment embedded in sect .ppcenv */
+#define CONFIG_ENV_OFFSET_REDUND	(CONFIG_ENV_OFFSET+CONFIG_ENV_SECT_SIZE)
+#define CONFIG_ENV_SIZE_REDUND	(CONFIG_ENV_SIZE)
 
 /*-----------------------------------------------------------------------
  * Cache Configuration
  */
-#define CFG_CACHELINE_SIZE	16	/* For all MPC8xx CPUs			*/
+#define CONFIG_SYS_CACHELINE_SIZE	16	/* For all MPC8xx CPUs			*/
 #if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT	4	/* log base 2 of the above value	*/
+#define CONFIG_SYS_CACHELINE_SHIFT	4	/* log base 2 of the above value	*/
 #endif
 
 /*-----------------------------------------------------------------------
@@ -221,27 +225,27 @@
  *-----------------------------------------------------------------------
  * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze
  */
-#define CFG_SYPCR	0xffffff89
+#define CONFIG_SYS_SYPCR	0xffffff89
 
 /*-----------------------------------------------------------------------
  * SIUMCR - SIU Module Configuration				11-6
  *-----------------------------------------------------------------------
  */
-#define CFG_SIUMCR	0x00610480
+#define CONFIG_SYS_SIUMCR	0x00610480
 
 /*-----------------------------------------------------------------------
  * TBSCR - Time Base Status and Control				11-26
  *-----------------------------------------------------------------------
  * Clear Reference Interrupt Status, Timebase freezing enabled
  */
-#define CFG_TBSCR	(TBSCR_REFA | TBSCR_REFB | TBSCR_TBF)
+#define CONFIG_SYS_TBSCR	(TBSCR_REFA | TBSCR_REFB | TBSCR_TBF)
 
 /*-----------------------------------------------------------------------
  * PISCR - Periodic Interrupt Status and Control		11-31
  *-----------------------------------------------------------------------
  * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
  */
-#define CFG_PISCR	(PISCR_PS | PISCR_PITF)
+#define CONFIG_SYS_PISCR	(PISCR_PS | PISCR_PITF)
 
 /*-----------------------------------------------------------------------
  * SCCR - System Clock and reset Control Register		15-27
@@ -250,9 +254,9 @@
  * power management and some other internal clocks
  */
 #define SCCR_MASK	0x01800000
-#define CFG_SCCR	0x01800000
+#define CONFIG_SYS_SCCR	0x01800000
 
-#define CFG_DER 0
+#define CONFIG_SYS_DER 0
 
 /*
  * Init Memory Controller:
@@ -266,14 +270,14 @@
  * restrict access enough to keep SRAM working (if any)
  * but not too much to meddle with FLASH accesses
  */
-#define CFG_REMAP_OR_AM		0x80000000	/* OR addr mask */
-#define CFG_PRELIM_OR_AM	0xE0000000	/* OR addr mask */
+#define CONFIG_SYS_REMAP_OR_AM		0x80000000	/* OR addr mask */
+#define CONFIG_SYS_PRELIM_OR_AM	0xE0000000	/* OR addr mask */
 
 /*
  * FLASH timing: Default value of OR0 after reset
  */
-#define CFG_OR0_PRELIM	0xfe000954
-#define CFG_BR0_PRELIM	0xf0000401
+#define CONFIG_SYS_OR0_PRELIM	0xfe000954
+#define CONFIG_SYS_BR0_PRELIM	0xf0000401
 
 /*
  * BR1 and OR1 (SDRAM)
@@ -283,16 +287,16 @@
 #define SDRAM_MAX_SIZE		(64 << 20)	/* max 64 MB per bank	*/
 
 /* SDRAM timing: Multiplexed addresses, GPL5 output to GPL5_A (don't care)	*/
-#define CFG_OR_TIMING_SDRAM	0x00000A00
+#define CONFIG_SYS_OR_TIMING_SDRAM	0x00000A00
 
-#define CFG_OR1_PRELIM	0xfc000800
-#define CFG_BR1_PRELIM	(0x000000C0 | 0x01)
+#define CONFIG_SYS_OR1_PRELIM	0xfc000800
+#define CONFIG_SYS_BR1_PRELIM	(0x000000C0 | 0x01)
 
-#define CFG_MPTPR	0x0200
+#define CONFIG_SYS_MPTPR	0x0200
 /* PTB=16, AMB=001, FIXME 1 RAS precharge cycles, 1 READ loop cycle (not used),
    1 Write loop Cycle (not used), 1 Timer Loop Cycle */
-#define CFG_MBMR	0x10964111
-#define CFG_MAR		0x00000088
+#define CONFIG_SYS_MBMR	0x10964111
+#define CONFIG_SYS_MAR		0x00000088
 
 /*
  * 4096	Rows from SDRAM example configuration
@@ -301,13 +305,13 @@
  * 4	Number of refresh cycles per period
  * 64	Refresh cycle in ms per number of rows
  */
-#define CFG_PTA_PER_CLK	((4096 * 64 * 1000) / (4 * 64))
+#define CONFIG_SYS_PTA_PER_CLK	((4096 * 64 * 1000) / (4 * 64))
 
 /* GPIO/PIGGY on CS3 initialization values
 */
-#define CFG_PIGGY_BASE	(0x30000000)
-#define CFG_OR3_PRELIM	(0xfe000d24)
-#define CFG_BR3_PRELIM	(0x30000401)
+#define CONFIG_SYS_PIGGY_BASE	(0x30000000)
+#define CONFIG_SYS_OR3_PRELIM	(0xfe000d24)
+#define CONFIG_SYS_BR3_PRELIM	(0x30000401)
 
 /*
  * Internal Definitions
@@ -325,9 +329,67 @@
 #define CONFIG_OF_LIBFDT	1
 #define CONFIG_OF_BOARD_SETUP	1
 
-#define OF_CPU			"PowerPC,866@0"
-#define OF_SOC			"soc@fff00000"
-#define OF_TBCLK		(bd->bi_busfreq / 4)
 #define OF_STDOUT_PATH		"/soc/cpm/serial@a80"
 
+/* enable I2C and select the hardware/software driver */
+#undef	CONFIG_HARD_I2C			/* I2C with hardware support	*/
+#define	CONFIG_SOFT_I2C		1	/* I2C bit-banged		*/
+#define CONFIG_SYS_I2C_SPEED		50000	/* I2C speed and slave address	*/
+#define CONFIG_SYS_I2C_SLAVE		0x7F
+#define I2C_SOFT_DECLARATIONS
+
+/*
+ * Software (bit-bang) I2C driver configuration
+ */
+#define I2C_BASE_DIR	((u16 *)(CONFIG_SYS_PIGGY_BASE + 0x04))
+#define I2C_BASE_PORT	((u8 *)(CONFIG_SYS_PIGGY_BASE + 0x09))
+
+#define SDA_BIT		0x40
+#define SCL_BIT		0x80
+#define SDA_CONF	0x1000
+#define SCL_CONF	0x2000
+
+#define I2C_ACTIVE	do {} while (0)
+#define I2C_TRISTATE	do {} while (0)
+#define I2C_READ	((in_8(I2C_BASE_PORT) & SDA_BIT) == SDA_BIT)
+#define I2C_SDA(bit)	if(bit) { \
+				clrbits(be16, I2C_BASE_DIR, SDA_CONF); \
+			} else { \
+				clrbits(8, I2C_BASE_PORT, SDA_BIT); \
+				setbits(be16, I2C_BASE_DIR, SDA_CONF); \
+			}
+#define I2C_SCL(bit)	if(bit) { \
+				clrbits(be16, I2C_BASE_DIR, SCL_CONF); \
+			} else { \
+				clrbits(8, I2C_BASE_PORT, SCL_BIT); \
+				setbits(be16, I2C_BASE_DIR, SCL_CONF); \
+			}
+#define I2C_DELAY	udelay(50)	/* 1/4 I2C clock duration */
+
+#define CONFIG_I2C_MULTI_BUS	1
+#define CONFIG_I2C_CMD_TREE	1
+#define CONFIG_SYS_MAX_I2C_BUS		2
+#define CONFIG_SYS_I2C_INIT_BOARD	1
+#define CONFIG_I2C_MUX		1
+
+/* EEprom support */
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN	1
+#define CONFIG_SYS_I2C_MULTI_EEPROMS	1
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_ENABLE
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10
+
+/* Support the IVM EEprom */
+#define	CONFIG_SYS_IVM_EEPROM_ADR	0x50
+#define CONFIG_SYS_IVM_EEPROM_MAX_LEN	0x400
+#define CONFIG_SYS_IVM_EEPROM_PAGE_LEN	0x100
+
+/* I2C SYSMON (LM75, AD7414 is almost compatible)			*/
+#define CONFIG_DTT_LM75		1	/* ON Semi's LM75		*/
+#define CONFIG_DTT_SENSORS	{0, 2, 4, 6}	/* Sensor addresses		*/
+#define CONFIG_SYS_DTT_MAX_TEMP	70
+#define CONFIG_SYS_DTT_LOW_TEMP	-30
+#define CONFIG_SYS_DTT_HYSTERESIS	3
+#define CONFIG_SYS_DTT_BUS_NUM		(CONFIG_SYS_MAX_I2C_BUS)
+
 #endif	/* __CONFIG_H */
diff --git a/include/configs/mimc200.h b/include/configs/mimc200.h
index 0506b93c7..2eb9ebc29 100644
--- a/include/configs/mimc200.h
+++ b/include/configs/mimc200.h
@@ -33,7 +33,7 @@
 
 #define CONFIG_MIMC200_EXT_FLASH	1
 
-#define CFG_HZ				1000
+#define CONFIG_SYS_HZ				1000
 
 /*
  * Set up the PLL to run at 140 MHz, the CPU to run at the PLL
@@ -41,15 +41,15 @@
  * and the PBA bus to run at 1/4 the PLL frequency.
  */
 #define CONFIG_PLL			1
-#define CFG_POWER_MANAGER		1
-#define CFG_OSC0_HZ			10000000
-#define CFG_PLL0_DIV			1
-#define CFG_PLL0_MUL			15
-#define CFG_PLL0_SUPPRESS_CYCLES	16
-#define CFG_CLKDIV_CPU			0
-#define CFG_CLKDIV_HSB			1
-#define CFG_CLKDIV_PBA			2
-#define CFG_CLKDIV_PBB			1
+#define CONFIG_SYS_POWER_MANAGER		1
+#define CONFIG_SYS_OSC0_HZ			10000000
+#define CONFIG_SYS_PLL0_DIV			1
+#define CONFIG_SYS_PLL0_MUL			15
+#define CONFIG_SYS_PLL0_SUPPRESS_CYCLES	16
+#define CONFIG_SYS_CLKDIV_CPU			0
+#define CONFIG_SYS_CLKDIV_HSB			1
+#define CONFIG_SYS_CLKDIV_PBA			2
+#define CONFIG_SYS_CLKDIV_PBB			1
 
 /*
  * The PLLOPT register controls the PLL like this:
@@ -58,7 +58,7 @@
  *
  * We want icp=1 (default) and ivco=0 (80-160 MHz) or ivco=2 (150-240MHz).
  */
-#define CFG_PLL0_OPT			0x04
+#define CONFIG_SYS_PLL0_OPT			0x04
 
 #define CONFIG_USART1			1
 #define CONFIG_MIMC200_DBGLINK		1
@@ -80,7 +80,7 @@
 
 #define CONFIG_SILENT_CONSOLE		1	/* enable silent startup */
 #define CONFIG_SILENT_CONSOLE_INPUT	1	/* disable console inputs */
-#define CFG_DEVICE_NULLDEV		1	/* include nulldev device */
+#define CONFIG_SYS_DEVICE_NULLDEV		1	/* include nulldev device */
 
 /*
  * Only interrupt autoboot if <space> is pressed. Otherwise, garbage
@@ -122,56 +122,56 @@
 #define CONFIG_ATMEL_USART		1
 #define CONFIG_MACB			1
 #define CONFIG_PORTMUX_PIO		1
-#define CFG_NR_PIOS			5
-#define CFG_HSDRAMC			1
+#define CONFIG_SYS_NR_PIOS			5
+#define CONFIG_SYS_HSDRAMC			1
 #define CONFIG_MMC			1
 #define CONFIG_ATMEL_MCI		1
 
-#define CFG_DCACHE_LINESZ		32
-#define CFG_ICACHE_LINESZ		32
+#define CONFIG_SYS_DCACHE_LINESZ		32
+#define CONFIG_SYS_ICACHE_LINESZ		32
 
 #define CONFIG_NR_DRAM_BANKS		1
 
-#define CFG_FLASH_CFI			1
+#define CONFIG_SYS_FLASH_CFI			1
 #define CONFIG_FLASH_CFI_DRIVER		1
 
-#define CFG_FLASH_BASE			0x00000000
-#define CFG_FLASH_SIZE			0x800000
-#define CFG_MAX_FLASH_BANKS		1
-#define CFG_MAX_FLASH_SECT		135
+#define CONFIG_SYS_FLASH_BASE			0x00000000
+#define CONFIG_SYS_FLASH_SIZE			0x800000
+#define CONFIG_SYS_MAX_FLASH_BANKS		1
+#define CONFIG_SYS_MAX_FLASH_SECT		135
 
-#define CFG_MONITOR_BASE		CFG_FLASH_BASE
+#define CONFIG_SYS_MONITOR_BASE		CONFIG_SYS_FLASH_BASE
 
-#define CFG_INTRAM_BASE			INTERNAL_SRAM_BASE
-#define CFG_INTRAM_SIZE			INTERNAL_SRAM_SIZE
-#define CFG_SDRAM_BASE			EBI_SDRAM_BASE
+#define CONFIG_SYS_INTRAM_BASE			INTERNAL_SRAM_BASE
+#define CONFIG_SYS_INTRAM_SIZE			INTERNAL_SRAM_SIZE
+#define CONFIG_SYS_SDRAM_BASE			EBI_SDRAM_BASE
 
-#define CFG_FRAM_BASE			0x08000000
-#define CFG_FRAM_SIZE			0x20000
+#define CONFIG_SYS_FRAM_BASE			0x08000000
+#define CONFIG_SYS_FRAM_SIZE			0x20000
 
-#define CFG_ENV_IS_IN_FLASH		1
-#define CFG_ENV_SIZE			65536
-#define CFG_ENV_ADDR			(CFG_FLASH_BASE + CFG_FLASH_SIZE - CFG_ENV_SIZE)
+#define CONFIG_ENV_IS_IN_FLASH		1
+#define CONFIG_ENV_SIZE			65536
+#define CONFIG_ENV_ADDR			(CONFIG_SYS_FLASH_BASE + CONFIG_SYS_FLASH_SIZE - CONFIG_ENV_SIZE)
 
-#define CFG_INIT_SP_ADDR		(CFG_INTRAM_BASE + CFG_INTRAM_SIZE)
+#define CONFIG_SYS_INIT_SP_ADDR		(CONFIG_SYS_INTRAM_BASE + CONFIG_SYS_INTRAM_SIZE)
 
-#define CFG_MALLOC_LEN			(1024*1024)
-#define CFG_DMA_ALLOC_LEN		(16384)
+#define CONFIG_SYS_MALLOC_LEN			(1024*1024)
+#define CONFIG_SYS_DMA_ALLOC_LEN		(16384)
 
 /* Allow 4MB for the kernel run-time image */
-#define CFG_LOAD_ADDR			(EBI_SDRAM_BASE + 0x00400000)
-#define CFG_BOOTPARAMS_LEN		(16 * 1024)
+#define CONFIG_SYS_LOAD_ADDR			(EBI_SDRAM_BASE + 0x00400000)
+#define CONFIG_SYS_BOOTPARAMS_LEN		(16 * 1024)
 
 /* Other configuration settings that shouldn't have to change all that often */
-#define CFG_PROMPT			"U-Boot> "
-#define CFG_CBSIZE			256
-#define CFG_MAXARGS			16
-#define CFG_PBSIZE			(CFG_CBSIZE + sizeof(CFG_PROMPT) + 16)
-#define CFG_LONGHELP			1
+#define CONFIG_SYS_PROMPT			"U-Boot> "
+#define CONFIG_SYS_CBSIZE			256
+#define CONFIG_SYS_MAXARGS			16
+#define CONFIG_SYS_PBSIZE			(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
+#define CONFIG_SYS_LONGHELP			1
 
-#define CFG_MEMTEST_START		EBI_SDRAM_BASE
-#define CFG_MEMTEST_END			(CFG_MEMTEST_START + 0x1f00000)
+#define CONFIG_SYS_MEMTEST_START		EBI_SDRAM_BASE
+#define CONFIG_SYS_MEMTEST_END			(CONFIG_SYS_MEMTEST_START + 0x1f00000)
 
-#define CFG_BAUDRATE_TABLE { 115200, 38400, 19200, 9600, 2400 }
+#define CONFIG_SYS_BAUDRATE_TABLE { 115200, 38400, 19200, 9600, 2400 }
 
 #endif /* __CONFIG_H */
diff --git a/include/configs/ml300.h b/include/configs/ml300.h
index 319923ad6..68d0c85e1 100644
--- a/include/configs/ml300.h
+++ b/include/configs/ml300.h
@@ -59,24 +59,24 @@
 
 #define CONFIG_SYSTEMACE	1
 #define CONFIG_DOS_PARTITION	1
-#define CFG_SYSTEMACE_BASE	XPAR_OPB_SYSACE_0_BASEADDR
-#define CFG_SYSTEMACE_WIDTH	XPAR_XSYSACE_MEM_WIDTH
+#define CONFIG_SYS_SYSTEMACE_BASE	XPAR_OPB_SYSACE_0_BASEADDR
+#define CONFIG_SYS_SYSTEMACE_WIDTH	XPAR_XSYSACE_MEM_WIDTH
 
-#define CFG_ENV_IS_IN_EEPROM	1	/* environment is in EEPROM */
+#define CONFIG_ENV_IS_IN_EEPROM	1	/* environment is in EEPROM */
 
 /* following are used only if env is in EEPROM */
-#ifdef	CFG_ENV_IS_IN_EEPROM
-#define CFG_I2C_EEPROM_ADDR	XPAR_PERSISTENT_0_IIC_0_EEPROMADDR
-#define CFG_I2C_EEPROM_ADDR_LEN 1
-#define CFG_ENV_OFFSET		XPAR_PERSISTENT_0_IIC_0_BASEADDR
+#ifdef	CONFIG_ENV_IS_IN_EEPROM
+#define CONFIG_SYS_I2C_EEPROM_ADDR	XPAR_PERSISTENT_0_IIC_0_EEPROMADDR
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
+#define CONFIG_ENV_OFFSET		XPAR_PERSISTENT_0_IIC_0_BASEADDR
 #define CONFIG_MISC_INIT_R	1	/* used to call out convert_env() */
 #define CONFIG_ENV_OVERWRITE	1	/* allow users to update ethaddr and serial# */
 #endif
 
 #include "../board/xilinx/ml300/xparameters.h"
 
-#define CFG_NO_FLASH		1	/* no flash */
-#define CFG_ENV_SIZE		XPAR_PERSISTENT_0_IIC_0_HIGHADDR - XPAR_PERSISTENT_0_IIC_0_BASEADDR + 1
+#define CONFIG_SYS_NO_FLASH		1	/* no flash */
+#define CONFIG_ENV_SIZE		XPAR_PERSISTENT_0_IIC_0_HIGHADDR - XPAR_PERSISTENT_0_IIC_0_BASEADDR + 1
 #define CONFIG_BAUDRATE		9600
 #define CONFIG_BOOTDELAY	3	/* autoboot after 3 seconds	*/
 
@@ -86,7 +86,7 @@
 				"root=/dev/xsysace/disc0/part3 rw"
 
 #define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
-#define CFG_LOADS_BAUD_CHANGE	1	/* allow baudrate change	*/
+#define CONFIG_SYS_LOADS_BAUD_CHANGE	1	/* allow baudrate change	*/
 
 
 /*
@@ -117,58 +117,58 @@
 /*
  * Miscellaneous configurable options
  */
-#define CFG_LONGHELP		/* undef to save memory		*/
-#define CFG_PROMPT	"=> "	/* Monitor Command Prompt	*/
+#define CONFIG_SYS_LONGHELP		/* undef to save memory		*/
+#define CONFIG_SYS_PROMPT	"=> "	/* Monitor Command Prompt	*/
 
-#define CFG_CBSIZE	256	/* Console I/O Buffer Size	*/
+#define CONFIG_SYS_CBSIZE	256	/* Console I/O Buffer Size	*/
 
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16)	/* Print Buffer Size */
-#define CFG_MAXARGS	16	/* max number of command args	*/
-#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)	/* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS	16	/* max number of command args	*/
+#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
 
-#define CFG_MEMTEST_START	0x0400000	/* memtest works on	*/
-#define CFG_MEMTEST_END		0x0C00000	/* 4 ... 12 MB in DRAM	*/
+#define CONFIG_SYS_MEMTEST_START	0x0400000	/* memtest works on	*/
+#define CONFIG_SYS_MEMTEST_END		0x0C00000	/* 4 ... 12 MB in DRAM	*/
 
-#define CFG_DUART_CHAN		0
-#define CFG_NS16550_REG_SIZE -4
-#define CFG_NS16550 1
-#define CFG_INIT_CHAN1	 1
+#define CONFIG_SYS_DUART_CHAN		0
+#define CONFIG_SYS_NS16550_REG_SIZE -4
+#define CONFIG_SYS_NS16550 1
+#define CONFIG_SYS_INIT_CHAN1	 1
 
 /* The following table includes the supported baudrates */
-#define CFG_BAUDRATE_TABLE  \
+#define CONFIG_SYS_BAUDRATE_TABLE  \
     {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400}
 
-#define CFG_LOAD_ADDR		0x400000	/* default load address */
-#define CFG_EXTBDINFO		1	/* To use extended board_into (bd_t) */
+#define CONFIG_SYS_LOAD_ADDR		0x400000	/* default load address */
+#define CONFIG_SYS_EXTBDINFO		1	/* To use extended board_into (bd_t) */
 
-#define CFG_HZ		1000	/* decrementer freq: 1 ms ticks */
+#define CONFIG_SYS_HZ		1000	/* decrementer freq: 1 ms ticks */
 
 /*-----------------------------------------------------------------------
  * Start addresses for the final memory configuration
  * (Set up by the startup code)
- * Please note that CFG_SDRAM_BASE _must_ start at 0
+ * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
  */
-#define CFG_SDRAM_BASE		0x00000000
-#define CFG_MONITOR_BASE	0x04000000
-#define CFG_MONITOR_LEN		(192 * 1024)	/* Reserve 196 kB for Monitor	*/
-#define CFG_MALLOC_LEN		(128 * 1024)	/* Reserve 128 kB for malloc()	*/
+#define CONFIG_SYS_SDRAM_BASE		0x00000000
+#define CONFIG_SYS_MONITOR_BASE	0x04000000
+#define CONFIG_SYS_MONITOR_LEN		(192 * 1024)	/* Reserve 196 kB for Monitor	*/
+#define CONFIG_SYS_MALLOC_LEN		(128 * 1024)	/* Reserve 128 kB for malloc()	*/
 
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
+#define CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
 
 /*-----------------------------------------------------------------------
  * Definitions for initial stack pointer and data area (in DPRAM)
  */
 
-#define CFG_INIT_RAM_ADDR	0x800000  /* inside of SDRAM */
-#define CFG_INIT_RAM_END	0x2000	  /* End of used area in RAM */
-#define CFG_GBL_DATA_SIZE	128	  /* size in bytes reserved for initial data */
-#define CFG_GBL_DATA_OFFSET    (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_INIT_RAM_ADDR	0x800000  /* inside of SDRAM */
+#define CONFIG_SYS_INIT_RAM_END	0x2000	  /* End of used area in RAM */
+#define CONFIG_SYS_GBL_DATA_SIZE	128	  /* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET    (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
 /*
  * Internal Definitions
diff --git a/include/configs/ml401.h b/include/configs/ml401.h
index 36a42ba6f..c802dcb6a 100644
--- a/include/configs/ml401.h
+++ b/include/configs/ml401.h
@@ -36,56 +36,59 @@
 #define	CONFIG_XILINX_UARTLITE
 #define	CONFIG_SERIAL_BASE	XILINX_UARTLITE_BASEADDR
 #define	CONFIG_BAUDRATE		XILINX_UARTLITE_BAUDRATE
-#define	CFG_BAUDRATE_TABLE	{ CONFIG_BAUDRATE }
-#else
-#ifdef XILINX_UART16550_BASEADDR
-#define CFG_NS16550
-#define CFG_NS16550_SERIAL
-#define CFG_NS16550_REG_SIZE	4
+#define	CONFIG_SYS_BAUDRATE_TABLE	{ CONFIG_BAUDRATE }
+#elif XILINX_UART16550_BASEADDR
+#define CONFIG_SYS_NS16550	1
+#define CONFIG_SYS_NS16550_SERIAL
+#define CONFIG_SYS_NS16550_REG_SIZE	-4
 #define CONFIG_CONS_INDEX	1
-#define CFG_NS16550_COM1	XILINX_UART16550_BASEADDR
-#define CFG_NS16550_CLK		XILINX_UART16550_CLOCK_HZ
+#define CONFIG_SYS_NS16550_COM1	(XILINX_UART16550_BASEADDR + 0x1000 + 0x3)
+#define CONFIG_SYS_NS16550_CLK		XILINX_UART16550_CLOCK_HZ
 #define	CONFIG_BAUDRATE		115200
-#define	CFG_BAUDRATE_TABLE	{ 9600, 115200 }
-#endif
+
+/* The following table includes the supported baudrates */
+#define CONFIG_SYS_BAUDRATE_TABLE  \
+	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400}
+#else
+#error Undefined uart
 #endif
 
 /* setting reset address */
-/*#define	CFG_RESET_ADDRESS	TEXT_BASE*/
+/*#define	CONFIG_SYS_RESET_ADDRESS	TEXT_BASE*/
 
 /* ethernet */
 #ifdef XILINX_EMAC_BASEADDR
 #define CONFIG_XILINX_EMAC	1
-#define CFG_ENET
+#define CONFIG_SYS_ENET
 #else
 #ifdef XILINX_EMACLITE_BASEADDR
 #define CONFIG_XILINX_EMACLITE	1
-#define CFG_ENET
+#define CONFIG_SYS_ENET
 #endif
 #endif
 #undef ET_DEBUG
 
 /* gpio */
 #ifdef XILINX_GPIO_BASEADDR
-#define	CFG_GPIO_0		1
-#define	CFG_GPIO_0_ADDR		XILINX_GPIO_BASEADDR
+#define	CONFIG_SYS_GPIO_0		1
+#define	CONFIG_SYS_GPIO_0_ADDR		XILINX_GPIO_BASEADDR
 #endif
 
 /* interrupt controller */
 #ifdef XILINX_INTC_BASEADDR
-#define	CFG_INTC_0		1
-#define	CFG_INTC_0_ADDR		XILINX_INTC_BASEADDR
-#define	CFG_INTC_0_NUM		XILINX_INTC_NUM_INTR_INPUTS
+#define	CONFIG_SYS_INTC_0		1
+#define	CONFIG_SYS_INTC_0_ADDR		XILINX_INTC_BASEADDR
+#define	CONFIG_SYS_INTC_0_NUM		XILINX_INTC_NUM_INTR_INPUTS
 #endif
 
 /* timer */
 #ifdef XILINX_TIMER_BASEADDR
 #if (XILINX_TIMER_IRQ != -1)
-#define	CFG_TIMER_0		1
-#define	CFG_TIMER_0_ADDR	XILINX_TIMER_BASEADDR
-#define	CFG_TIMER_0_IRQ		XILINX_TIMER_IRQ
+#define	CONFIG_SYS_TIMER_0		1
+#define	CONFIG_SYS_TIMER_0_ADDR	XILINX_TIMER_BASEADDR
+#define	CONFIG_SYS_TIMER_0_IRQ		XILINX_TIMER_IRQ
 #define	FREQUENCE		XILINX_CLOCK_FREQ
-#define	CFG_TIMER_0_PRELOAD	( FREQUENCE/1000 )
+#define	CONFIG_SYS_TIMER_0_PRELOAD	( FREQUENCE/1000 )
 #endif
 #else
 #ifdef XILINX_CLOCK_FREQ
@@ -95,20 +98,20 @@
 #endif
 #endif
 /* FSL */
-/* #define	CFG_FSL_2 */
+/* #define	CONFIG_SYS_FSL_2 */
 /* #define	FSL_INTR_2	1 */
 
 /*
  * memory layout - Example
  * TEXT_BASE = 0x1200_0000;
- * CFG_SRAM_BASE = 0x1000_0000;
- * CFG_SRAM_SIZE = 0x0400_0000;
+ * CONFIG_SYS_SRAM_BASE = 0x1000_0000;
+ * CONFIG_SYS_SRAM_SIZE = 0x0400_0000;
  *
- * CFG_GBL_DATA_OFFSET = 0x1000_0000 + 0x0400_0000 - 0x1000 = 0x13FF_F000
- * CFG_MONITOR_BASE = 0x13FF_F000 - 0x40000 = 0x13FB_F000
- * CFG_MALLOC_BASE = 0x13FB_F000 - 0x40000 = 0x13F7_F000
+ * CONFIG_SYS_GBL_DATA_OFFSET = 0x1000_0000 + 0x0400_0000 - 0x1000 = 0x13FF_F000
+ * CONFIG_SYS_MONITOR_BASE = 0x13FF_F000 - 0x40000 = 0x13FB_F000
+ * CONFIG_SYS_MALLOC_BASE = 0x13FB_F000 - 0x40000 = 0x13F7_F000
  *
- * 0x1000_0000	CFG_SDRAM_BASE
+ * 0x1000_0000	CONFIG_SYS_SDRAM_BASE
  *					FREE
  * 0x1200_0000	TEXT_BASE
  *		U-BOOT code
@@ -116,68 +119,68 @@
  *					FREE
  *
  *					STACK
- * 0x13F7_F000	CFG_MALLOC_BASE
+ * 0x13F7_F000	CONFIG_SYS_MALLOC_BASE
  *					MALLOC_AREA	256kB	Alloc
- * 0x11FB_F000	CFG_MONITOR_BASE
+ * 0x11FB_F000	CONFIG_SYS_MONITOR_BASE
  *					MONITOR_CODE	256kB	Env
- * 0x13FF_F000	CFG_GBL_DATA_OFFSET
+ * 0x13FF_F000	CONFIG_SYS_GBL_DATA_OFFSET
  *					GLOBAL_DATA	4kB	bd, gd
- * 0x1400_0000	CFG_SDRAM_BASE + CFG_SDRAM_SIZE
+ * 0x1400_0000	CONFIG_SYS_SDRAM_BASE + CONFIG_SYS_SDRAM_SIZE
  */
 
 /* ddr sdram - main memory */
-#define	CFG_SDRAM_BASE		XILINX_RAM_START
-#define	CFG_SDRAM_SIZE		XILINX_RAM_SIZE
-#define	CFG_MEMTEST_START	CFG_SDRAM_BASE
-#define	CFG_MEMTEST_END		(CFG_SDRAM_BASE + 0x1000)
+#define	CONFIG_SYS_SDRAM_BASE		XILINX_RAM_START
+#define	CONFIG_SYS_SDRAM_SIZE		XILINX_RAM_SIZE
+#define	CONFIG_SYS_MEMTEST_START	CONFIG_SYS_SDRAM_BASE
+#define	CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_SDRAM_BASE + 0x1000)
 
 /* global pointer */
-#define	CFG_GBL_DATA_SIZE	0x1000	/* size of global data */
+#define	CONFIG_SYS_GBL_DATA_SIZE	0x1000	/* size of global data */
 /* start of global data */
-#define	CFG_GBL_DATA_OFFSET	(CFG_SDRAM_BASE + CFG_SDRAM_SIZE - CFG_GBL_DATA_SIZE)
+#define	CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_SDRAM_BASE + CONFIG_SYS_SDRAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE)
 
 /* monitor code */
 #define	SIZE			0x40000
-#define	CFG_MONITOR_LEN		SIZE
-#define	CFG_MONITOR_BASE	(CFG_GBL_DATA_OFFSET - CFG_MONITOR_LEN)
-#define	CFG_MONITOR_END		(CFG_MONITOR_BASE + CFG_MONITOR_LEN)
-#define	CFG_MALLOC_LEN		SIZE
-#define	CFG_MALLOC_BASE		(CFG_MONITOR_BASE - CFG_MALLOC_LEN)
+#define	CONFIG_SYS_MONITOR_LEN		SIZE
+#define	CONFIG_SYS_MONITOR_BASE	(CONFIG_SYS_GBL_DATA_OFFSET - CONFIG_SYS_MONITOR_LEN)
+#define	CONFIG_SYS_MONITOR_END		(CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)
+#define	CONFIG_SYS_MALLOC_LEN		SIZE
+#define	CONFIG_SYS_MALLOC_BASE		(CONFIG_SYS_MONITOR_BASE - CONFIG_SYS_MALLOC_LEN)
 
 /* stack */
-#define	CFG_INIT_SP_OFFSET	CFG_MONITOR_BASE
+#define	CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_MONITOR_BASE
 
 /*#define	RAMENV */
 #define	FLASH
 
 #ifdef FLASH
-	#define	CFG_FLASH_BASE		XILINX_FLASH_START
-	#define	CFG_FLASH_SIZE		XILINX_FLASH_SIZE
-	#define	CFG_FLASH_CFI		1
+	#define	CONFIG_SYS_FLASH_BASE		XILINX_FLASH_START
+	#define	CONFIG_SYS_FLASH_SIZE		XILINX_FLASH_SIZE
+	#define	CONFIG_SYS_FLASH_CFI		1
 	#define	CONFIG_FLASH_CFI_DRIVER	1
-	#define	CFG_FLASH_EMPTY_INFO	1	/* ?empty sector */
-	#define	CFG_MAX_FLASH_BANKS	1	/* max number of memory banks */
-	#define	CFG_MAX_FLASH_SECT	128	/* max number of sectors on one chip */
-	#define	CFG_FLASH_PROTECTION		/* hardware flash protection */
+	#define	CONFIG_SYS_FLASH_EMPTY_INFO	1	/* ?empty sector */
+	#define	CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks */
+	#define	CONFIG_SYS_MAX_FLASH_SECT	128	/* max number of sectors on one chip */
+	#define	CONFIG_SYS_FLASH_PROTECTION		/* hardware flash protection */
 
 	#ifdef	RAMENV
-		#define	CFG_ENV_IS_NOWHERE	1
-		#define	CFG_ENV_SIZE		0x1000
-		#define	CFG_ENV_ADDR		(CFG_MONITOR_BASE - CFG_ENV_SIZE)
+		#define	CONFIG_ENV_IS_NOWHERE	1
+		#define	CONFIG_ENV_SIZE		0x1000
+		#define	CONFIG_ENV_ADDR		(CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SIZE)
 
 	#else	/* !RAMENV */
-		#define	CFG_ENV_IS_IN_FLASH	1
-		#define	CFG_ENV_SECT_SIZE	0x40000	/* 256K(one sector) for env */
-		#define	CFG_ENV_ADDR		(CFG_FLASH_BASE + (2 * CFG_ENV_SECT_SIZE))
-		#define	CFG_ENV_SIZE		0x40000
+		#define	CONFIG_ENV_IS_IN_FLASH	1
+		#define	CONFIG_ENV_SECT_SIZE	0x40000	/* 256K(one sector) for env */
+		#define	CONFIG_ENV_ADDR		(CONFIG_SYS_FLASH_BASE + (2 * CONFIG_ENV_SECT_SIZE))
+		#define	CONFIG_ENV_SIZE		0x40000
 	#endif /* !RAMBOOT */
 #else /* !FLASH */
 	/* ENV in RAM */
-	#define	CFG_NO_FLASH		1
-	#define	CFG_ENV_IS_NOWHERE	1
-	#define	CFG_ENV_SIZE		0x1000
-	#define	CFG_ENV_ADDR		(CFG_MONITOR_BASE - CFG_ENV_SIZE)
-	#define	CFG_FLASH_PROTECTION		/* hardware flash protection */
+	#define	CONFIG_SYS_NO_FLASH		1
+	#define	CONFIG_ENV_IS_NOWHERE	1
+	#define	CONFIG_ENV_SIZE		0x1000
+	#define	CONFIG_ENV_ADDR		(CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SIZE)
+	#define	CONFIG_SYS_FLASH_PROTECTION		/* hardware flash protection */
 #endif /* !FLASH */
 
 /* system ace */
@@ -185,8 +188,8 @@
 	#define	CONFIG_SYSTEMACE
 	/* #define DEBUG_SYSTEMACE */
 	#define	SYSTEMACE_CONFIG_FPGA
-	#define	CFG_SYSTEMACE_BASE	XILINX_SYSACE_BASEADDR
-	#define	CFG_SYSTEMACE_WIDTH	XILINX_SYSACE_MEM_WIDTH
+	#define	CONFIG_SYS_SYSTEMACE_BASE	XILINX_SYSACE_BASEADDR
+	#define	CONFIG_SYS_SYSTEMACE_WIDTH	XILINX_SYSACE_MEM_WIDTH
 	#define	CONFIG_DOS_PARTITION
 #endif
 
@@ -208,7 +211,7 @@
 #define CONFIG_CMD_IRQ
 #define CONFIG_CMD_MFSL
 
-#ifndef CFG_ENET
+#ifndef CONFIG_SYS_ENET
 	#undef CONFIG_CMD_NET
 #else
 	#define CONFIG_CMD_PING
@@ -245,12 +248,12 @@
 #endif
 
 /* Miscellaneous configurable options */
-#define	CFG_PROMPT	"U-Boot-mONStR> "
-#define	CFG_CBSIZE	512	/* size of console buffer */
-#define	CFG_PBSIZE	(CFG_CBSIZE + sizeof(CFG_PROMPT) + 16) /* print buffer size */
-#define	CFG_MAXARGS	15	/* max number of command args */
-#define	CFG_LONGHELP
-#define	CFG_LOAD_ADDR	0x12000000 /* default load address */
+#define	CONFIG_SYS_PROMPT	"U-Boot-mONStR> "
+#define	CONFIG_SYS_CBSIZE	512	/* size of console buffer */
+#define	CONFIG_SYS_PBSIZE	(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) /* print buffer size */
+#define	CONFIG_SYS_MAXARGS	15	/* max number of command args */
+#define	CONFIG_SYS_LONGHELP
+#define	CONFIG_SYS_LOAD_ADDR	0x12000000 /* default load address */
 
 #define	CONFIG_BOOTDELAY	30
 #define	CONFIG_BOOTARGS		"root=romfs"
@@ -262,8 +265,8 @@
 #define	CONFIG_ETHADDR		00:E0:0C:00:00:FD
 
 /* architecture dependent code */
-#define	CFG_USR_EXCEP	/* user exception */
-#define CFG_HZ	1000
+#define	CONFIG_SYS_USR_EXCEP	/* user exception */
+#define CONFIG_SYS_HZ	1000
 
 #define	CONFIG_PREBOOT		"echo U-BOOT for ML401;setenv preboot;echo"
 
@@ -274,6 +277,5 @@
 					"1m(romfs),1m(cramfs),-(jffs2)\0"
 
 #define CONFIG_CMDLINE_EDITING
-#define CONFIG_OF_LIBFDT	1
 
 #endif	/* __CONFIG_H */
diff --git a/include/configs/ml507.h b/include/configs/ml507.h
index f8cd49998..a7319e427 100644
--- a/include/configs/ml507.h
+++ b/include/configs/ml507.h
@@ -17,106 +17,33 @@
 
 #ifndef __CONFIG_H
 #define __CONFIG_H
-/*
-#define DEBUG
-#define ET_DEBUG
-*/
- /*CPU*/
-#define CONFIG_XILINX_ML507	1
-#define CONFIG_XILINX_440	1
+
+/*CPU*/
 #define CONFIG_440		1
-#define CONFIG_4xx		1
+#define CONFIG_XILINX_ML507	1
 #include "../board/xilinx/ml507/xparameters.h"
 
 /*Mem Map*/
-#define CFG_SDRAM_BASE		0x0
-#define CFG_SDRAM_SIZE_MB	256
-#define CFG_MONITOR_BASE	TEXT_BASE
-#define CFG_MONITOR_LEN		( 192 * 1024 )
-#define CFG_MALLOC_LEN		( CFG_ENV_SIZE + 128 * 1024 )
-
-/*Uart*/
-#define CONFIG_XILINX_UARTLITE
-#define CONFIG_BAUDRATE		XPAR_UARTLITE_0_BAUDRATE
-#define CFG_BAUDRATE_TABLE	{ XPAR_UARTLITE_0_BAUDRATE }
-#define CONFIG_SERIAL_BASE	XPAR_UARTLITE_0_BASEADDR
-
-/*Cmd*/
-#include <config_cmd_default.h>
-#define CONFIG_CMD_ASKENV
-#define CONFIG_CMD_CACHE
-#define CONFIG_CMD_DIAG
-#define CONFIG_CMD_ELF
-#define CONFIG_CMD_IRQ
-#define CONFIG_CMD_REGINFO
-#define CONFIG_CMD_JFFS2
-#define CONFIG_JFFS2_CMDLINE
-#undef CONFIG_CMD_I2C
-#undef CONFIG_CMD_DTT
-#undef CONFIG_CMD_NET
-#undef CONFIG_CMD_PING
-#undef CONFIG_CMD_DHCP
-#undef CONFIG_CMD_EEPROM
-#undef CONFIG_CMD_IMLS
+#define CONFIG_SYS_SDRAM_SIZE_MB	256
 
 /*Env*/
-#define	CFG_ENV_IS_IN_FLASH
-#define	CFG_ENV_SIZE		0x20000
-#define	CFG_ENV_SECT_SIZE	0x20000
-#define CFG_ENV_OFFSET 		0x340000
-#define CFG_ENV_ADDR 		(XPAR_FLASH_MEM0_BASEADDR+CFG_ENV_OFFSET)
+#define	CONFIG_ENV_IS_IN_FLASH	1
+#define	CONFIG_ENV_SIZE		0x20000
+#define	CONFIG_ENV_SECT_SIZE	0x20000
+#define CONFIG_ENV_OFFSET	0x340000
+#define CONFIG_ENV_ADDR		(XPAR_FLASH_MEM0_BASEADDR+CONFIG_ENV_OFFSET)
 
 /*Misc*/
-#define CONFIG_BOOTDELAY	5		/* autoboot after 5 seconds     */
-#define CFG_LONGHELP				/* undef to save memory         */
-#define CFG_PROMPT		"board:/# "	/* Monitor Command Prompt       */
-#if defined(CONFIG_CMD_KGDB)
-#define CFG_CBSIZE		1024		/* Console I/O Buffer Size      */
-#else
-#define CFG_CBSIZE		256		/* Console I/O Buffer Size      */
-#endif
-#define CFG_PBSIZE		( CFG_CBSIZE + sizeof( CFG_PROMPT ) + 16 )
-#define CFG_MAXARGS		16		/* max number of command args   */
-#define CFG_BARGSIZE		CFG_CBSIZE	/* Boot Argument Buffer Size */
-#define CFG_MEMTEST_START	0x00400000	/* memtest works on           */
-#define CFG_MEMTEST_END		0x00C00000	/* 4 ... 12 MB in DRAM        */
-#define CFG_LOAD_ADDR		0x00400000	/* default load address       */
-#define CFG_EXTBDINFO		1		/* Extended board_into (bd_t) */
-#define CFG_HZ			1000		/* decrementer freq: 1 ms ticks */
-#define CONFIG_CMDLINE_EDITING			/* add command line history     */
-#define CONFIG_AUTO_COMPLETE			/* add autocompletion support   */
-#define CONFIG_LOOPW				/* enable loopw command         */
-#define CONFIG_MX_CYCLIC			/* enable mdc/mwc commands      */
-#define CONFIG_ZERO_BOOTDELAY_CHECK		/* check for keypress on bootdelay==0 */
-#define CONFIG_VERSION_VARIABLE			/* include version env variable */
-#define CFG_CONSOLE_INFO_QUIET			/* don't print console @ startup */
-#define CFG_HUSH_PARSER				/* Use the HUSH parser          */
-#define	CFG_PROMPT_HUSH_PS2	"> "
-#define CONFIG_LOADS_ECHO			/* echo on for serial download  */
-#define CFG_LOADS_BAUD_CHANGE			/* allow baudrate change        */
-#define CFG_BOOTMAPSZ		( 8 << 20 )	/* Initial Memory map for Linux */
+#define CONFIG_SYS_PROMPT	"ml507:/# "	/* Monitor Command Prompt    */
 #define CONFIG_PREBOOT		"echo U-Boot is up and runnining;"
 
-/*Stack*/
-#define CFG_INIT_RAM_ADDR	0x800000	/* Initial RAM address    */
-#define CFG_INIT_RAM_END	0x2000		/* End of used area in RAM  */
-#define CFG_GBL_DATA_SIZE	128		/* num bytes initial data   */
-#define CFG_GBL_DATA_OFFSET	( CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE )
-#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
-/*Speed*/
-#define CONFIG_SYS_CLK_FREQ	XPAR_CORE_CLOCK_FREQ_HZ
-
 /*Flash*/
-#define	CFG_FLASH_BASE		XPAR_FLASH_MEM0_BASEADDR
-#define	CFG_FLASH_SIZE		(32*1024*1024)
-#define	CFG_FLASH_CFI		1
-#define	CONFIG_FLASH_CFI_DRIVER	1
-#define	CFG_FLASH_EMPTY_INFO	1
-#define	CFG_MAX_FLASH_BANKS	1
-#define	CFG_MAX_FLASH_SECT	259
-#define	CFG_FLASH_PROTECTION
+#define	CONFIG_SYS_FLASH_SIZE	(32*1024*1024)
+#define	CONFIG_SYS_MAX_FLASH_SECT	259
 #define MTDIDS_DEFAULT		"nor0=ml507-flash"
 #define MTDPARTS_DEFAULT	"mtdparts=ml507-flash:-(user)"
 
+/*Generic Configs*/
+#include <configs/xilinx-ppc440.h>
 
 #endif						/* __CONFIG_H */
diff --git a/include/configs/modnet50.h b/include/configs/modnet50.h
index 5159897db..c4f528688 100644
--- a/include/configs/modnet50.h
+++ b/include/configs/modnet50.h
@@ -45,8 +45,8 @@
 /*
  * Size of malloc() pool
  */
-#define CFG_MALLOC_LEN		(CFG_ENV_SIZE + 128*1024)
-#define CFG_GBL_DATA_SIZE	128
+#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + 128*1024)
+#define CONFIG_SYS_GBL_DATA_SIZE	128
 
 /*
  * Hardware drivers
@@ -84,7 +84,7 @@
 #define CONFIG_NETMASK          255.255.255.0
 #define CONFIG_IPADDR		192.168.30.2
 #define CONFIG_SERVERIP         192.168.30.122
-#define CFG_ETH_PHY_ADDR        0x100
+#define CONFIG_SYS_ETH_PHY_ADDR        0x100
 #define CONFIG_CMDLINE_TAG      /* submit bootargs to kernel */
 
 /*#define CONFIG_BOOTDELAY	10*/
@@ -101,24 +101,24 @@
 /*
  * Miscellaneous configurable options
  */
-#define	CFG_LONGHELP				/* undef to save memory	*/
-#define	CFG_PROMPT		"modnet50 # "	/* Monitor Command Prompt */
-#define	CFG_CBSIZE		256		/* Console I/O Buffer Size */
-#define	CFG_PBSIZE              (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define	CFG_MAXARGS		16		/* max number of command args */
-#define CFG_BARGSIZE		CFG_CBSIZE	/* Boot Argument Buffer Size */
+#define	CONFIG_SYS_LONGHELP				/* undef to save memory	*/
+#define	CONFIG_SYS_PROMPT		"modnet50 # "	/* Monitor Command Prompt */
+#define	CONFIG_SYS_CBSIZE		256		/* Console I/O Buffer Size */
+#define	CONFIG_SYS_PBSIZE              (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define	CONFIG_SYS_MAXARGS		16		/* max number of command args */
+#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size */
 
-#define CFG_MEMTEST_START	0x00400000	/* memtest works on	*/
-#define CFG_MEMTEST_END		0x00800000	/* 4 ... 8 MB in DRAM	*/
+#define CONFIG_SYS_MEMTEST_START	0x00400000	/* memtest works on	*/
+#define CONFIG_SYS_MEMTEST_END		0x00800000	/* 4 ... 8 MB in DRAM	*/
 
-#undef  CFG_CLKS_IN_HZ		/* everything, incl board info, in Hz */
+#undef  CONFIG_SYS_CLKS_IN_HZ		/* everything, incl board info, in Hz */
 
-#define	CFG_LOAD_ADDR		0x00500000	/* default load address	*/
+#define	CONFIG_SYS_LOAD_ADDR		0x00500000	/* default load address	*/
 
-#define	CFG_HZ			900		/* decrementer freq: 2 kHz */
+#define	CONFIG_SYS_HZ			900		/* decrementer freq: 2 kHz */
 
 						/* valid baudrates */
-#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
 
 /*-----------------------------------------------------------------------
  * Stack sizes
@@ -155,27 +155,27 @@
 #define PHYS_EXT_1		0x30000000 /* Extensions Bank #1 */
 #define PHYS_EXT_SIZE		0x01000000 /* 32 MB memory mapped I/O */
 
-#define CFG_FLASH_BASE		PHYS_FLASH_1
-#define CFG_FLASH_SIZE		PHYS_FLASH_1_SIZE
+#define CONFIG_SYS_FLASH_BASE		PHYS_FLASH_1
+#define CONFIG_SYS_FLASH_SIZE		PHYS_FLASH_1_SIZE
 
 /*-----------------------------------------------------------------------
  * FLASH and environment organization
  */
-#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks */
-#define CFG_MAX_FLASH_SECT	35	/* max number of sectors on one chip */
-#define CFG_MAIN_SECT_SIZE      0x00010000  /* main size of sectors on one chip */
+#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks */
+#define CONFIG_SYS_MAX_FLASH_SECT	35	/* max number of sectors on one chip */
+#define CONFIG_SYS_MAIN_SECT_SIZE      0x00010000  /* main size of sectors on one chip */
 
 /* timeout values are in ticks */
-#define CFG_FLASH_ERASE_TOUT	(2*CFG_HZ) /* Timeout for Flash Erase */
-#define CFG_FLASH_WRITE_TOUT	(2*CFG_HZ) /* Timeout for Flash Write */
+#define CONFIG_SYS_FLASH_ERASE_TOUT	(2*CONFIG_SYS_HZ) /* Timeout for Flash Erase */
+#define CONFIG_SYS_FLASH_WRITE_TOUT	(2*CONFIG_SYS_HZ) /* Timeout for Flash Write */
 
 /* environment settings */
-#define	CFG_ENV_IS_IN_FLASH
-#undef CFG_ENV_IS_NOWHERE
+#define	CONFIG_ENV_IS_IN_FLASH
+#undef CONFIG_ENV_IS_NOWHERE
 
-#define CFG_ENV_ADDR		0x1001C000 /* environment start address */
-#define CFG_ENV_SECT_SIZE       0x10000 /* Total Size of Environment Sector */
-#define CFG_ENV_SIZE		0x4000	/* max size for environment */
+#define CONFIG_ENV_ADDR		0x1001C000 /* environment start address */
+#define CONFIG_ENV_SECT_SIZE       0x10000 /* Total Size of Environment Sector */
+#define CONFIG_ENV_SIZE		0x4000	/* max size for environment */
 
 /*
  * JFFS2 partitions
diff --git a/include/configs/motionpro.h b/include/configs/motionpro.h
index f2a35ee2b..b3f16d5e7 100644
--- a/include/configs/motionpro.h
+++ b/include/configs/motionpro.h
@@ -75,7 +75,7 @@
 #define CONFIG_PSC_CONSOLE	1	/* console is on PSC1 */
 #define CONFIG_NETCONSOLE	1	/* network console */
 #define CONFIG_BAUDRATE		115200
-#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
 
 
 /*
@@ -166,13 +166,13 @@
 /*
  * Clock configuration: SYS_XTALIN = 33MHz
  */
-#define CFG_MPC5XXX_CLKIN	33000000
+#define CONFIG_SYS_MPC5XXX_CLKIN	33000000
 
 
 /*
  * Set IPB speed to 100MHz
  */
-#define CFG_IPBCLK_EQUALS_XLBCLK
+#define CONFIG_SYS_IPBCLK_EQUALS_XLBCLK
 
 
 /*
@@ -183,8 +183,8 @@
  * Setting MBAR to otherwise will cause system hang when using SmartDMA such
  * as network commands.
  */
-#define CFG_MBAR		0xf0000000
-#define CFG_SDRAM_BASE		0x00000000
+#define CONFIG_SYS_MBAR		0xf0000000
+#define CONFIG_SYS_SDRAM_BASE		0x00000000
 
 /*
  * If building for running out of SDRAM, then MBAR has been set up beforehand
@@ -192,61 +192,61 @@
  * MBAR, as given in the doccumentation.
  */
 #if TEXT_BASE == 0x00100000
-#define CFG_DEFAULT_MBAR	0xf0000000
+#define CONFIG_SYS_DEFAULT_MBAR	0xf0000000
 #else /* TEXT_BASE != 0x00100000 */
-#define CFG_DEFAULT_MBAR	0x80000000
-#define CFG_LOWBOOT		1
+#define CONFIG_SYS_DEFAULT_MBAR	0x80000000
+#define CONFIG_SYS_LOWBOOT		1
 #endif /* TEXT_BASE == 0x00100000 */
 
 /* Use SRAM until RAM will be available */
-#define CFG_INIT_RAM_ADDR	MPC5XXX_SRAM
-#define CFG_INIT_RAM_END	MPC5XXX_SRAM_SIZE
+#define CONFIG_SYS_INIT_RAM_ADDR	MPC5XXX_SRAM
+#define CONFIG_SYS_INIT_RAM_END	MPC5XXX_SRAM_SIZE
 
-#define CFG_GBL_DATA_SIZE	128	/* size in bytes for initial data */
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_GBL_DATA_SIZE	128	/* size in bytes for initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
-#define CFG_MONITOR_BASE	TEXT_BASE
-#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
-#define CFG_RAMBOOT		1
+#define CONFIG_SYS_MONITOR_BASE	TEXT_BASE
+#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
+#define CONFIG_SYS_RAMBOOT		1
 #endif
 
-#define CFG_MONITOR_LEN		(256 << 10)	/* 256 kB for Monitor */
-#define CFG_MALLOC_LEN		(1024 << 10)	/* 1 MiB for malloc() */
-#define CFG_BOOTMAPSZ		(8 << 20)	/* initial mem map for Linux */
+#define CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* 256 kB for Monitor */
+#define CONFIG_SYS_MALLOC_LEN		(1024 << 10)	/* 1 MiB for malloc() */
+#define CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* initial mem map for Linux */
 
 
 /*
  * Chip selects configuration
  */
 /* Boot Chipselect */
-#define CFG_BOOTCS_START	CFG_FLASH_BASE
-#define CFG_BOOTCS_SIZE		CFG_FLASH_SIZE
-#define CFG_BOOTCS_CFG		0x00045D00
+#define CONFIG_SYS_BOOTCS_START	CONFIG_SYS_FLASH_BASE
+#define CONFIG_SYS_BOOTCS_SIZE		CONFIG_SYS_FLASH_SIZE
+#define CONFIG_SYS_BOOTCS_CFG		0x00045D00
 
 /* Flash memory addressing */
-#define CFG_CS0_START		CFG_FLASH_BASE
-#define CFG_CS0_SIZE		CFG_FLASH_SIZE
-#define CFG_CS0_CFG		CFG_BOOTCS_CFG
+#define CONFIG_SYS_CS0_START		CONFIG_SYS_FLASH_BASE
+#define CONFIG_SYS_CS0_SIZE		CONFIG_SYS_FLASH_SIZE
+#define CONFIG_SYS_CS0_CFG		CONFIG_SYS_BOOTCS_CFG
 
 /* Dual Port SRAM -- Kollmorgen Drive memory addressing */
-#define CFG_CS1_START		0x50000000
-#define CFG_CS1_SIZE		0x10000
-#define CFG_CS1_CFG		0x05055800
+#define CONFIG_SYS_CS1_START		0x50000000
+#define CONFIG_SYS_CS1_SIZE		0x10000
+#define CONFIG_SYS_CS1_CFG		0x05055800
 
 /* Local register access */
-#define CFG_CS2_START		0x50010000
-#define CFG_CS2_SIZE		0x10000
-#define CFG_CS2_CFG		0x05055800
+#define CONFIG_SYS_CS2_START		0x50010000
+#define CONFIG_SYS_CS2_SIZE		0x10000
+#define CONFIG_SYS_CS2_CFG		0x05055800
 
 /* Anybus CompactCom Module memory addressing */
-#define CFG_CS3_START		0x50020000
-#define CFG_CS3_SIZE		0x10000
-#define CFG_CS3_CFG		0x05055800
+#define CONFIG_SYS_CS3_START		0x50020000
+#define CONFIG_SYS_CS3_SIZE		0x10000
+#define CONFIG_SYS_CS3_CFG		0x05055800
 
 /* No burst and dead cycle = 2 for all CSs */
-#define CFG_CS_BURST		0x00000000
-#define CFG_CS_DEADCYCLE	0x22222222
+#define CONFIG_SYS_CS_BURST		0x00000000
+#define CONFIG_SYS_CS_DEADCYCLE	0x22222222
 
 
 /*
@@ -262,13 +262,13 @@
 /*
  * Flash configuration
  */
-#define CFG_FLASH_CFI		1	/* Flash is CFI conformant */
+#define CONFIG_SYS_FLASH_CFI		1	/* Flash is CFI conformant */
 #define CONFIG_FLASH_CFI_DRIVER	1
-#define CFG_FLASH_BASE		0xff000000
-#define CFG_FLASH_SIZE		0x01000000
-#define CFG_MAX_FLASH_BANKS	1	/* max num of memory banks */
-#define CFG_FLASH_BANKS_LIST	{ CFG_FLASH_BASE }
-#define CFG_MAX_FLASH_SECT	128	/* max num of sects on one chip */
+#define CONFIG_SYS_FLASH_BASE		0xff000000
+#define CONFIG_SYS_FLASH_SIZE		0x01000000
+#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max num of memory banks */
+#define CONFIG_SYS_FLASH_BANKS_LIST	{ CONFIG_SYS_FLASH_BASE }
+#define CONFIG_SYS_MAX_FLASH_SECT	128	/* max num of sects on one chip */
 #define CONFIG_FLASH_16BIT		/* Flash is 16-bit */
 
 /*
@@ -284,14 +284,14 @@
 /*
  * IDE/ATA configuration
  */
-#define CFG_ATA_BASE_ADDR	MPC5XXX_ATA
-#define CFG_IDE_MAXBUS		1
-#define CFG_IDE_MAXDEVICE	1
+#define CONFIG_SYS_ATA_BASE_ADDR	MPC5XXX_ATA
+#define CONFIG_SYS_IDE_MAXBUS		1
+#define CONFIG_SYS_IDE_MAXDEVICE	1
 #define CONFIG_IDE_PREINIT
 
-#define CFG_ATA_DATA_OFFSET	0x0060
-#define CFG_ATA_REG_OFFSET	CFG_ATA_DATA_OFFSET
-#define CFG_ATA_STRIDE		4
+#define CONFIG_SYS_ATA_DATA_OFFSET	0x0060
+#define CONFIG_SYS_ATA_REG_OFFSET	CONFIG_SYS_ATA_DATA_OFFSET
+#define CONFIG_SYS_ATA_STRIDE		4
 #define CONFIG_DOS_PARTITION
 
 
@@ -299,26 +299,25 @@
  * I2C configuration
  */
 #define CONFIG_HARD_I2C		1	/* I2C with hardware support */
-#define CFG_I2C_MODULE		2	/* select I2C module #2 */
-#define CFG_I2C_SPEED		100000	/* 100 kHz */
-#define CFG_I2C_SLAVE		0x7F
+#define CONFIG_SYS_I2C_MODULE		2	/* select I2C module #2 */
+#define CONFIG_SYS_I2C_SPEED		100000	/* 100 kHz */
+#define CONFIG_SYS_I2C_SLAVE		0x7F
 
 
 /*
  * EEPROM configuration
  */
-#define CFG_I2C_EEPROM_ADDR_LEN		1
-#define CFG_EEPROM_PAGE_WRITE_ENABLE	1	/* DTT driver needs this */
-#define CFG_EEPROM_PAGE_WRITE_BITS	1	/* 2 bytes per write cycle */
-#define CFG_EEPROM_PAGE_WRITE_DELAY_MS	5	/* 2ms/cycle + 3ms extra */
-#define CFG_I2C_MULTI_EEPROMS		1	/* 2 EEPROMs (addr:50,52) */
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN		1
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS	1	/* 2 bytes per write cycle */
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	5	/* 2ms/cycle + 3ms extra */
+#define CONFIG_SYS_I2C_MULTI_EEPROMS		1	/* 2 EEPROMs (addr:50,52) */
 
 
 /*
  * RTC configuration
  */
 #define CONFIG_RTC_DS1337	1
-#define CFG_I2C_RTC_ADDR	0x68
+#define CONFIG_SYS_I2C_RTC_ADDR	0x68
 
 
 /*
@@ -353,15 +352,15 @@ extern void __led_set(led_id_t id, int state);
 /*
  * Environment settings
  */
-#define CFG_ENV_IS_IN_FLASH	1
+#define CONFIG_ENV_IS_IN_FLASH	1
 /* This has to be a multiple of the Flash sector size */
-#define CFG_ENV_ADDR		(CFG_MONITOR_BASE + CFG_MONITOR_LEN)
-#define CFG_ENV_SIZE		0x1000
-#define CFG_ENV_SECT_SIZE	0x20000
+#define CONFIG_ENV_ADDR		(CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)
+#define CONFIG_ENV_SIZE		0x1000
+#define CONFIG_ENV_SECT_SIZE	0x20000
 
 /* Configuration of redundant environment */
-#define CFG_ENV_ADDR_REDUND	(CFG_ENV_ADDR + CFG_ENV_SECT_SIZE)
-#define CFG_ENV_SIZE_REDUND	(CFG_ENV_SIZE)
+#define CONFIG_ENV_ADDR_REDUND	(CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE)
+#define CONFIG_ENV_SIZE_REDUND	(CONFIG_ENV_SIZE)
 
 /*
  * Pin multiplexing configuration
@@ -375,48 +374,48 @@ extern void __led_set(led_id_t id, int state);
  * Timer: CAN2/GPIO
  * PSC6/IRDA: GPIO (default)
  */
-#define CFG_GPS_PORT_CONFIG	0x1105a004
+#define CONFIG_SYS_GPS_PORT_CONFIG	0x1105a004
 
 
 /*
  * Motion-PRO's CPLD revision control register
  */
-#define CPLD_REV_REGISTER	(CFG_CS2_START + 0x06)
+#define CPLD_REV_REGISTER	(CONFIG_SYS_CS2_START + 0x06)
 
 
 /*
  * Miscellaneous configurable options
  */
-#define CFG_LONGHELP			/* undef to save memory    */
-#define CFG_PROMPT		"=> "	/* Monitor Command Prompt   */
-#define CFG_CBSIZE		1024	/* Console I/O Buffer Size */
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16)	/* Print Buffer Size */
-#define CFG_MAXARGS		16		/* max number of command args */
-#define CFG_BARGSIZE		CFG_CBSIZE	/* Boot Argument Buffer Size */
+#define CONFIG_SYS_LONGHELP			/* undef to save memory    */
+#define CONFIG_SYS_PROMPT		"=> "	/* Monitor Command Prompt   */
+#define CONFIG_SYS_CBSIZE		1024	/* Console I/O Buffer Size */
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)	/* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS		16		/* max number of command args */
+#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size */
 
-#define CFG_MEMTEST_START	0x00100000	/* memtest works on */
-#define CFG_MEMTEST_END		0x03e00000	/* 1 ... 62 MiB in DRAM */
-#define CFG_ALT_MEMTEST
+#define CONFIG_SYS_MEMTEST_START	0x00100000	/* memtest works on */
+#define CONFIG_SYS_MEMTEST_END		0x03e00000	/* 1 ... 62 MiB in DRAM */
+#define CONFIG_SYS_ALT_MEMTEST
 
-#define CFG_LOAD_ADDR		0x200000	/* default kernel load addr */
+#define CONFIG_SYS_LOAD_ADDR		0x200000	/* default kernel load addr */
 
-#define CFG_HZ			1000	/* decrementer freq: 1 ms ticks */
+#define CONFIG_SYS_HZ			1000	/* decrementer freq: 1 ms ticks */
 
 
 /*
  * Various low-level settings
  */
-#define CFG_HID0_INIT		HID0_ICE | HID0_ICFI
-#define CFG_HID0_FINAL		HID0_ICE
+#define CONFIG_SYS_HID0_INIT		HID0_ICE | HID0_ICFI
+#define CONFIG_SYS_HID0_FINAL		HID0_ICE
 
 #define BOOTFLAG_COLD		0x01	/* Normal Power-On: Boot from FLASH  */
 #define BOOTFLAG_WARM		0x02	/* Software reboot */
 
-#define CFG_CACHELINE_SIZE	32	/* For MPC5xxx CPUs */
+#define CONFIG_SYS_CACHELINE_SIZE	32	/* For MPC5xxx CPUs */
 
 
 /* Not needed for MPC 5xxx U-Boot, but used by tools/updater */
-#define CFG_RESET_ADDRESS	0xfff00100
+#define CONFIG_SYS_RESET_ADDRESS	0xfff00100
 
 /* pass open firmware flat tree */
 #define CONFIG_OF_LIBFDT	1
diff --git a/include/configs/mp2usb.h b/include/configs/mp2usb.h
index 87264fbb4..cbbdb0c77 100644
--- a/include/configs/mp2usb.h
+++ b/include/configs/mp2usb.h
@@ -45,9 +45,9 @@
 #define CONFIG_SETUP_MEMORY_TAGS 1
 #define CONFIG_INITRD_TAG	1
 
-#define CFG_ATMEL_PLL_INIT_BUG	1
+#define CONFIG_SYS_ATMEL_PLL_INIT_BUG	1
 #ifndef CONFIG_SKIP_LOWLEVEL_INIT
-#define CFG_USE_MAIN_OSCILLATOR	1
+#define CONFIG_SYS_USE_MAIN_OSCILLATOR	1
 /* flash */
 #define MC_PUIA_VAL	0x00000000
 #define MC_PUP_VAL	0x00000000
@@ -76,17 +76,19 @@
 #define SDRC_MR_VAL2	0x00000003 /* Load Mode Register */
 #define SDRC_MR_VAL3	0x00000000 /* Normal Mode */
 #define SDRC_TR_VAL	0x000002E0 /* Write refresh rate */
+#else
+#define CONFIG_SKIP_RELOCATE_UBOOT
 #endif	/* CONFIG_SKIP_LOWLEVEL_INIT */
 
 /*
  * Size of malloc() pool
  */
-#define CFG_MALLOC_LEN	(CFG_ENV_SIZE + 128*1024)
-#define CFG_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
+#define CONFIG_SYS_MALLOC_LEN	(CONFIG_ENV_SIZE + 128*1024)
+#define CONFIG_SYS_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
 
 #define CONFIG_BAUDRATE		115200
 
-#define CFG_AT91C_BRGR_DIVISOR	33	/* hardcode so no __divsi3 : AT91C_MASTER_CLOCK /(baudrate * 16) */
+#define CONFIG_SYS_AT91C_BRGR_DIVISOR	33	/* hardcode so no __divsi3 : AT91C_MASTER_CLOCK /(baudrate * 16) */
 
 /*
  * Hardware drivers
@@ -107,25 +109,25 @@
 #define CONFIG_DOS_PARTITION	1
 #define CONFIG_AT91C_PQFP_UHPBUG 1
 
-#undef CFG_USB_OHCI_BOARD_INIT
-#define CFG_USB_OHCI_CPU_INIT		1
-#define CFG_USB_OHCI_REGS_BASE		AT91_USB_HOST_BASE
-#define CFG_USB_OHCI_SLOT_NAME		"at91rm9200"
-#define CFG_USB_OHCI_MAX_ROOT_PORTS	15
+#undef CONFIG_SYS_USB_OHCI_BOARD_INIT
+#define CONFIG_SYS_USB_OHCI_CPU_INIT		1
+#define CONFIG_SYS_USB_OHCI_REGS_BASE		AT91_USB_HOST_BASE
+#define CONFIG_SYS_USB_OHCI_SLOT_NAME		"at91rm9200"
+#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS	15
 
 #undef CONFIG_HARD_I2C
 
 #ifdef CONFIG_HARD_I2C
-#define CFG_I2C_SPEED		0	/* not used */
-#define CFG_I2C_SLAVE		0	/* not used */
+#define CONFIG_SYS_I2C_SPEED		0	/* not used */
+#define CONFIG_SYS_I2C_SLAVE		0	/* not used */
 #define CONFIG_RTC_RS5C372A		/* RICOH I2C RTC */
-#define CFG_I2C_RTC_ADDR	0x32
-#define CFG_I2C_EEPROM_ADDR	0x50
-#define CFG_I2C_EEPROM_ADDR_LEN 1
-#define CFG_I2C_EEPROM_ADDR_OVERFLOW
+#define CONFIG_SYS_I2C_RTC_ADDR	0x32
+#define CONFIG_SYS_I2C_EEPROM_ADDR	0x50
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
+#define CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW
 #endif
 /* still about 20 kB free with this defined */
-#define CFG_LONGHELP
+#define CONFIG_SYS_LONGHELP
 
 #define CONFIG_BOOTDELAY      3
 
@@ -174,14 +176,14 @@
 #endif
 
 
-#define CFG_LONGHELP
+#define CONFIG_SYS_LONGHELP
 
 #define CONFIG_NR_DRAM_BANKS	1
 #define PHYS_SDRAM		0x20000000
 #define PHYS_SDRAM_SIZE		0x08000000	/* 128 megs */
 
-#define CFG_MEMTEST_START	PHYS_SDRAM
-#define CFG_MEMTEST_END		CFG_MEMTEST_START + PHYS_SDRAM_SIZE - 262144
+#define CONFIG_SYS_MEMTEST_START	PHYS_SDRAM
+#define CONFIG_SYS_MEMTEST_END		CONFIG_SYS_MEMTEST_START + PHYS_SDRAM_SIZE - 262144
 
 #define CONFIG_DRIVER_ETHER
 #define CONFIG_NET_RETRY_COUNT		20
@@ -189,35 +191,35 @@
 
 #define PHYS_FLASH_1			0x10000000
 #define PHYS_FLASH_SIZE			0x1000000  /* 16 megs main flash */
-#define CFG_FLASH_BASE			PHYS_FLASH_1
-#define CFG_MONITOR_BASE		CFG_FLASH_BASE
-#define CFG_MAX_FLASH_BANKS		1
-#define CFG_MAX_FLASH_SECT		256
-#define CFG_FLASH_ERASE_TOUT		(2 * CFG_HZ)	/* Timeout for Flash Erase */
-#define CFG_FLASH_WRITE_TOUT		(2 * CFG_HZ)	/* Timeout for Flash Write */
-#define CFG_FLASH_LOCK_TOUT		(10*CFG_HZ)	/* Timeout for Flash Set Lock Bit */
-#define CFG_FLASH_UNLOCK_TOUT		(10*CFG_HZ)	/* Timeout for Flash Clear Lock Bits */
-#define CFG_FLASH_PROTECTION				/* "Real" (hardware) sectors protection */
-
-#define CFG_ENV_IS_IN_FLASH		1
-#define CFG_ENV_OFFSET			0x20000		/* after u-boot.bin */
-#define CFG_ENV_ADDR			(CFG_FLASH_BASE+CFG_ENV_OFFSET)
-#define CFG_ENV_SIZE			0x20000
-
-#define CFG_LOAD_ADDR		0x21000000  /* default load address */
-
-#define CFG_BAUDRATE_TABLE	{ 115200, 57600, 38400, 19200, 9600 }
-
-#define CFG_PROMPT		"=> "		/* Monitor Command Prompt */
-#define CFG_CBSIZE		256		/* Console I/O Buffer Size */
-#define CFG_MAXARGS		32		/* max number of command args */
-#define CFG_PBSIZE		(CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-
-#define CFG_DEVICE_DEREGISTER           /* needs device_deregister */
+#define CONFIG_SYS_FLASH_BASE			PHYS_FLASH_1
+#define CONFIG_SYS_MONITOR_BASE		CONFIG_SYS_FLASH_BASE
+#define CONFIG_SYS_MAX_FLASH_BANKS		1
+#define CONFIG_SYS_MAX_FLASH_SECT		256
+#define CONFIG_SYS_FLASH_ERASE_TOUT		(2 * CONFIG_SYS_HZ)	/* Timeout for Flash Erase */
+#define CONFIG_SYS_FLASH_WRITE_TOUT		(2 * CONFIG_SYS_HZ)	/* Timeout for Flash Write */
+#define CONFIG_SYS_FLASH_LOCK_TOUT		(10*CONFIG_SYS_HZ)	/* Timeout for Flash Set Lock Bit */
+#define CONFIG_SYS_FLASH_UNLOCK_TOUT		(10*CONFIG_SYS_HZ)	/* Timeout for Flash Clear Lock Bits */
+#define CONFIG_SYS_FLASH_PROTECTION				/* "Real" (hardware) sectors protection */
+
+#define CONFIG_ENV_IS_IN_FLASH		1
+#define CONFIG_ENV_OFFSET			0x20000		/* after u-boot.bin */
+#define CONFIG_ENV_ADDR			(CONFIG_SYS_FLASH_BASE+CONFIG_ENV_OFFSET)
+#define CONFIG_ENV_SIZE			0x20000
+
+#define CONFIG_SYS_LOAD_ADDR		0x21000000  /* default load address */
+
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 115200, 57600, 38400, 19200, 9600 }
+
+#define CONFIG_SYS_PROMPT		"=> "		/* Monitor Command Prompt */
+#define CONFIG_SYS_CBSIZE		256		/* Console I/O Buffer Size */
+#define CONFIG_SYS_MAXARGS		32		/* max number of command args */
+#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+
+#define CONFIG_SYS_DEVICE_DEREGISTER           /* needs device_deregister */
 #define LITTLEENDIAN            1       /* used by usb_ohci.c  */
 
-#define CFG_HZ 1000
-#define CFG_HZ_CLOCK (AT91C_MASTER_CLOCK/2)	/* AT91C_TC0_CMR is implicitly set to */
+#define CONFIG_SYS_HZ 1000
+#define CONFIG_SYS_HZ_CLOCK (AT91C_MASTER_CLOCK/2)	/* AT91C_TC0_CMR is implicitly set to */
 						/* AT91C_TC_TIMER_DIV1_CLOCK */
 
 #define CONFIG_STACKSIZE	(32*1024)	/* regular stack */
@@ -226,7 +228,7 @@
 #error CONFIG_USE_IRQ not supported
 #endif
 
-#define CFG_DEVICE_NULLDEV	 1	/* enble null device		*/
+#define CONFIG_SYS_DEVICE_NULLDEV	 1	/* enble null device		*/
 #undef CONFIG_SILENT_CONSOLE		/* enable silent startup	*/
 
 #define CONFIG_AUTOBOOT_KEYED
diff --git a/include/configs/mpc7448hpc2.h b/include/configs/mpc7448hpc2.h
index d379b1fb0..483bc5305 100644
--- a/include/configs/mpc7448hpc2.h
+++ b/include/configs/mpc7448hpc2.h
@@ -42,18 +42,18 @@
 #define CONFIG_HIGH_BATS	/* High BATs supported */
 #define CONFIG_ALTIVEC		/* undef to disable */
 
-#define CFG_BOARD_NAME		"MPC7448 HPC II"
+#define CONFIG_SYS_BOARD_NAME		"MPC7448 HPC II"
 #define CONFIG_IDENT_STRING	" Freescale MPC7448 HPC II"
 
-#define CFG_OCN_CLK		133000000	/* 133 MHz */
-#define CFG_CONFIG_BUS_CLK	133000000
+#define CONFIG_SYS_OCN_CLK		133000000	/* 133 MHz */
+#define CONFIG_SYS_CONFIG_BUS_CLK	133000000
 
-#define CFG_CLK_SPREAD		/* Enable Spread-Spectrum Clock generation */
+#define CONFIG_SYS_CLK_SPREAD		/* Enable Spread-Spectrum Clock generation */
 
 #undef  CONFIG_ECC		/* disable ECC support */
 
 /* Board-specific Initialization Functions to be called */
-#define CFG_BOARD_ASM_INIT
+#define CONFIG_SYS_BOARD_ASM_INIT
 #define CONFIG_BOARD_EARLY_INIT_F
 #define CONFIG_BOARD_EARLY_INIT_R
 #define CONFIG_MISC_INIT_R
@@ -70,10 +70,10 @@
 
 #define CONFIG_BAUDRATE		115200	/* console baudrate = 115000 */
 
-/*#define CFG_HUSH_PARSER */
-#undef CFG_HUSH_PARSER
+/*#define CONFIG_SYS_HUSH_PARSER */
+#undef CONFIG_SYS_HUSH_PARSER
 
-#define CFG_PROMPT_HUSH_PS2	"> "
+#define CONFIG_SYS_PROMPT_HUSH_PS2	"> "
 
 /* Pass open firmware flat tree */
 #define CONFIG_OF_LIBFDT	1
@@ -90,19 +90,19 @@
  *
  * what to do:
  * If you have hacked a serial cable onto the second DUART channel,
- * change the CFG_DUART port from 1 to 0 below.
+ * change the CONFIG_SYS_DUART port from 1 to 0 below.
  *
  */
 
 #define CONFIG_CONS_INDEX	1
-#define CFG_NS16550
-#define CFG_NS16550_SERIAL
-#define CFG_NS16550_REG_SIZE	1
-#define CFG_NS16550_CLK		CFG_OCN_CLK * 8
+#define CONFIG_SYS_NS16550
+#define CONFIG_SYS_NS16550_SERIAL
+#define CONFIG_SYS_NS16550_REG_SIZE	1
+#define CONFIG_SYS_NS16550_CLK		CONFIG_SYS_OCN_CLK * 8
 
-#define CFG_NS16550_COM1	(CFG_TSI108_CSR_RST_BASE+0x7808)
-#define CFG_NS16550_COM2	(CFG_TSI108_CSR_RST_BASE+0x7C08)
-#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+#define CONFIG_SYS_NS16550_COM1	(CONFIG_SYS_TSI108_CSR_RST_BASE+0x7808)
+#define CONFIG_SYS_NS16550_COM2	(CONFIG_SYS_TSI108_CSR_RST_BASE+0x7C08)
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
 
 #define CONFIG_BOOTDELAY	3	/* autoboot after 3 seconds */
 #define CONFIG_ZERO_BOOTDELAY_CHECK
@@ -137,7 +137,7 @@
 /*-------------------------------------------------------------------------- */
 
 #define CONFIG_LOADS_ECHO	0	/* echo off for serial download */
-#define CFG_LOADS_BAUD_CHANGE	/* allow baudrate changes */
+#define CONFIG_SYS_LOADS_BAUD_CHANGE	/* allow baudrate changes */
 
 #undef CONFIG_WATCHDOG		/* watchdog disabled */
 
@@ -172,37 +172,37 @@
 
 /*set date in u-boot*/
 #define CONFIG_RTC_M48T35A
-#define CFG_NVRAM_BASE_ADDR	0xfc000000
-#define CFG_NVRAM_SIZE		0x8000
+#define CONFIG_SYS_NVRAM_BASE_ADDR	0xfc000000
+#define CONFIG_SYS_NVRAM_SIZE		0x8000
 /*
  * Miscellaneous configurable options
  */
 #define CONFIG_VERSION_VARIABLE		1
 #define CONFIG_TSI108_I2C
 
-#define CFG_I2C_EEPROM_ADDR		0x50	/* I2C EEPROM page 1 */
-#define CFG_I2C_EEPROM_ADDR_LEN		1	/* Bytes of address */
+#define CONFIG_SYS_I2C_EEPROM_ADDR		0x50	/* I2C EEPROM page 1 */
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN		1	/* Bytes of address */
 
-#define CFG_LONGHELP		/* undef to save memory */
-#define CFG_PROMPT	"=> "	/* Monitor Command Prompt */
+#define CONFIG_SYS_LONGHELP		/* undef to save memory */
+#define CONFIG_SYS_PROMPT	"=> "	/* Monitor Command Prompt */
 
 #if defined(CONFIG_CMD_KGDB)
-#define CFG_CBSIZE		1024	/* Console I/O Buffer Size */
+#define CONFIG_SYS_CBSIZE		1024	/* Console I/O Buffer Size */
 #define CONFIG_KGDB_BAUDRATE	115200	/* speed to run kgdb serial port at */
 #else
-#define CFG_CBSIZE		256	/* Console I/O Buffer Size */
+#define CONFIG_SYS_CBSIZE		256	/* Console I/O Buffer Size */
 #endif
 
-#define CFG_PBSIZE (CFG_CBSIZE + sizeof(CFG_PROMPT) + 16)/* Print Buffer Size */
-#define CFG_MAXARGS	16		/* max number of command args */
-#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size */
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)/* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS	16		/* max number of command args */
+#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size */
 
-#define CFG_MEMTEST_START	0x00400000	/* memtest works on */
-#define CFG_MEMTEST_END		0x07c00000	/* 4 ... 124 MB in DRAM */
+#define CONFIG_SYS_MEMTEST_START	0x00400000	/* memtest works on */
+#define CONFIG_SYS_MEMTEST_END		0x07c00000	/* 4 ... 124 MB in DRAM */
 
-#define CFG_LOAD_ADDR	0x00400000	/* default load address */
+#define CONFIG_SYS_LOAD_ADDR	0x00400000	/* default load address */
 
-#define CFG_HZ		1000		/* decr freq: 1ms ticks */
+#define CONFIG_SYS_HZ		1000		/* decr freq: 1ms ticks */
 
 /*
  * Low Level Configuration Settings
@@ -215,46 +215,46 @@
  */
 
 /*
- * When locking data in cache you should point the CFG_INIT_RAM_ADDRESS
+ * When locking data in cache you should point the CONFIG_SYS_INIT_RAM_ADDRESS
  * To an unused memory region. The stack will remain in cache until RAM
  * is initialized
  */
-#undef  CFG_INIT_RAM_LOCK
-#define CFG_INIT_RAM_ADDR	0x07d00000	/* unused memory region */
-#define CFG_INIT_RAM_END	0x4000/* larger space - we have SDRAM initialized */
+#undef  CONFIG_SYS_INIT_RAM_LOCK
+#define CONFIG_SYS_INIT_RAM_ADDR	0x07d00000	/* unused memory region */
+#define CONFIG_SYS_INIT_RAM_END	0x4000/* larger space - we have SDRAM initialized */
 
-#define CFG_GBL_DATA_SIZE	128/* size in bytes reserved for init data */
-#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define CONFIG_SYS_GBL_DATA_SIZE	128/* size in bytes reserved for init data */
+#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
 
 /*-----------------------------------------------------------------------
  * Start addresses for the final memory configuration
  * (Set up by the startup code)
- * Please note that CFG_SDRAM_BASE _must_ start at 0
+ * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
  */
 
-#define CFG_SDRAM_BASE		0x00000000	/* first 256 MB of SDRAM */
-#define CFG_SDRAM1_BASE		0x10000000	/* next 256MB of SDRAM */
+#define CONFIG_SYS_SDRAM_BASE		0x00000000	/* first 256 MB of SDRAM */
+#define CONFIG_SYS_SDRAM1_BASE		0x10000000	/* next 256MB of SDRAM */
 
-#define CFG_SDRAM2_BASE	0x40000000	/* beginning of non-cacheable alias for SDRAM - first 256MB */
-#define CFG_SDRAM3_BASE	0x50000000	/* next Non-Cacheable 256MB of SDRAM */
+#define CONFIG_SYS_SDRAM2_BASE	0x40000000	/* beginning of non-cacheable alias for SDRAM - first 256MB */
+#define CONFIG_SYS_SDRAM3_BASE	0x50000000	/* next Non-Cacheable 256MB of SDRAM */
 
-#define CFG_PCI_PFM_BASE	0x80000000	/* Prefetchable (cacheable) PCI/X PFM and SDRAM OCN (128MB+128MB) */
+#define CONFIG_SYS_PCI_PFM_BASE	0x80000000	/* Prefetchable (cacheable) PCI/X PFM and SDRAM OCN (128MB+128MB) */
 
-#define CFG_PCI_MEM32_BASE	0xE0000000	/* Non-Cacheable PCI/X MEM and SDRAM OCN (128MB+128MB) */
+#define CONFIG_SYS_PCI_MEM32_BASE	0xE0000000	/* Non-Cacheable PCI/X MEM and SDRAM OCN (128MB+128MB) */
 
-#define CFG_MISC_REGION_BASE	0xf0000000	/* Base Address for (PCI/X + Flash) region */
+#define CONFIG_SYS_MISC_REGION_BASE	0xf0000000	/* Base Address for (PCI/X + Flash) region */
 
-#define CFG_FLASH_BASE	0xff000000	/* Base Address of Flash device */
-#define CFG_FLASH_BASE2	0xfe000000	/* Alternate Flash Base Address */
+#define CONFIG_SYS_FLASH_BASE	0xff000000	/* Base Address of Flash device */
+#define CONFIG_SYS_FLASH_BASE2	0xfe000000	/* Alternate Flash Base Address */
 
 #define CONFIG_VERY_BIG_RAM	/* we will use up to 256M memory for cause we are short of BATS */
 
 #define PCI0_IO_BASE_BOOTM	0xfd000000
 
-#define CFG_RESET_ADDRESS	0x3fffff00
-#define CFG_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor */
-#define CFG_MONITOR_BASE	TEXT_BASE	/* u-boot code base */
-#define CFG_MALLOC_LEN		(256 << 10)	/* Reserve 256 kB for malloc */
+#define CONFIG_SYS_RESET_ADDRESS	0x3fffff00
+#define CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor */
+#define CONFIG_SYS_MONITOR_BASE	TEXT_BASE	/* u-boot code base */
+#define CONFIG_SYS_MALLOC_LEN		(256 << 10)	/* Reserve 256 kB for malloc */
 
 /* Peripheral Device section */
 
@@ -262,8 +262,8 @@
  * Resources on the Tsi108
  */
 
-#define CFG_TSI108_CSR_RST_BASE	0xC0000000	/* Tsi108 CSR base after reset */
-#define CFG_TSI108_CSR_BASE	CFG_TSI108_CSR_RST_BASE	/* Runtime Tsi108 CSR base */
+#define CONFIG_SYS_TSI108_CSR_RST_BASE	0xC0000000	/* Tsi108 CSR base after reset */
+#define CONFIG_SYS_TSI108_CSR_BASE	CONFIG_SYS_TSI108_CSR_RST_BASE	/* Runtime Tsi108 CSR base */
 
 #define ENABLE_PCI_CSR_BAR	/* enables access to Tsi108 CSRs from the PCI/X bus */
 
@@ -287,74 +287,74 @@
 /* PCI MEMORY MAP section */
 
 /* PCI view of System Memory */
-#define CFG_PCI_MEMORY_BUS	0x00000000
-#define CFG_PCI_MEMORY_PHYS	0x00000000
-#define CFG_PCI_MEMORY_SIZE	0x80000000
+#define CONFIG_SYS_PCI_MEMORY_BUS	0x00000000
+#define CONFIG_SYS_PCI_MEMORY_PHYS	0x00000000
+#define CONFIG_SYS_PCI_MEMORY_SIZE	0x80000000
 
 /* PCI Memory Space */
-#define CFG_PCI_MEM_BUS		(CFG_PCI_MEM_PHYS)
-#define CFG_PCI_MEM_PHYS	(CFG_PCI_MEM32_BASE)	/* 0xE0000000 */
-#define CFG_PCI_MEM_SIZE	0x10000000	/* 256 MB space for PCI/X Mem + SDRAM OCN */
+#define CONFIG_SYS_PCI_MEM_BUS		(CONFIG_SYS_PCI_MEM_PHYS)
+#define CONFIG_SYS_PCI_MEM_PHYS	(CONFIG_SYS_PCI_MEM32_BASE)	/* 0xE0000000 */
+#define CONFIG_SYS_PCI_MEM_SIZE	0x10000000	/* 256 MB space for PCI/X Mem + SDRAM OCN */
 
 /* PCI I/O Space */
-#define CFG_PCI_IO_BUS		0x00000000
-#define CFG_PCI_IO_PHYS		0xfa000000	/* Changed from fd000000 */
+#define CONFIG_SYS_PCI_IO_BUS		0x00000000
+#define CONFIG_SYS_PCI_IO_PHYS		0xfa000000	/* Changed from fd000000 */
 
-#define CFG_PCI_IO_SIZE		0x01000000	/* 16MB */
+#define CONFIG_SYS_PCI_IO_SIZE		0x01000000	/* 16MB */
 
 #define _IO_BASE		0x00000000	/* points to PCI I/O space      */
 
 /* PCI Config Space mapping */
-#define CFG_PCI_CFG_BASE	0xfb000000	/* Changed from FE000000 */
-#define CFG_PCI_CFG_SIZE	0x01000000	/* 16MB */
+#define CONFIG_SYS_PCI_CFG_BASE	0xfb000000	/* Changed from FE000000 */
+#define CONFIG_SYS_PCI_CFG_SIZE	0x01000000	/* 16MB */
 
-#define CFG_IBAT0U	0xFE0003FF
-#define CFG_IBAT0L	0xFE000002
+#define CONFIG_SYS_IBAT0U	0xFE0003FF
+#define CONFIG_SYS_IBAT0L	0xFE000002
 
-#define CFG_IBAT1U	0x00007FFF
-#define CFG_IBAT1L	0x00000012
+#define CONFIG_SYS_IBAT1U	0x00007FFF
+#define CONFIG_SYS_IBAT1L	0x00000012
 
-#define CFG_IBAT2U	0x80007FFF
-#define CFG_IBAT2L	0x80000022
+#define CONFIG_SYS_IBAT2U	0x80007FFF
+#define CONFIG_SYS_IBAT2L	0x80000022
 
-#define CFG_IBAT3U	0x00000000
-#define CFG_IBAT3L	0x00000000
+#define CONFIG_SYS_IBAT3U	0x00000000
+#define CONFIG_SYS_IBAT3L	0x00000000
 
-#define CFG_IBAT4U	0x00000000
-#define CFG_IBAT4L	0x00000000
+#define CONFIG_SYS_IBAT4U	0x00000000
+#define CONFIG_SYS_IBAT4L	0x00000000
 
-#define CFG_IBAT5U	0x00000000
-#define CFG_IBAT5L	0x00000000
+#define CONFIG_SYS_IBAT5U	0x00000000
+#define CONFIG_SYS_IBAT5L	0x00000000
 
-#define CFG_IBAT6U	0x00000000
-#define CFG_IBAT6L	0x00000000
+#define CONFIG_SYS_IBAT6U	0x00000000
+#define CONFIG_SYS_IBAT6L	0x00000000
 
-#define CFG_IBAT7U	0x00000000
-#define CFG_IBAT7L	0x00000000
+#define CONFIG_SYS_IBAT7U	0x00000000
+#define CONFIG_SYS_IBAT7L	0x00000000
 
-#define CFG_DBAT0U	0xE0003FFF
-#define CFG_DBAT0L	0xE000002A
+#define CONFIG_SYS_DBAT0U	0xE0003FFF
+#define CONFIG_SYS_DBAT0L	0xE000002A
 
-#define CFG_DBAT1U	0x00007FFF
-#define CFG_DBAT1L	0x00000012
+#define CONFIG_SYS_DBAT1U	0x00007FFF
+#define CONFIG_SYS_DBAT1L	0x00000012
 
-#define CFG_DBAT2U	0x00000000
-#define CFG_DBAT2L	0x00000000
+#define CONFIG_SYS_DBAT2U	0x00000000
+#define CONFIG_SYS_DBAT2L	0x00000000
 
-#define CFG_DBAT3U	0xC0000003
-#define CFG_DBAT3L	0xC000002A
+#define CONFIG_SYS_DBAT3U	0xC0000003
+#define CONFIG_SYS_DBAT3L	0xC000002A
 
-#define CFG_DBAT4U	0x00000000
-#define CFG_DBAT4L	0x00000000
+#define CONFIG_SYS_DBAT4U	0x00000000
+#define CONFIG_SYS_DBAT4L	0x00000000
 
-#define CFG_DBAT5U	0x00000000
-#define CFG_DBAT5L	0x00000000
+#define CONFIG_SYS_DBAT5U	0x00000000
+#define CONFIG_SYS_DBAT5L	0x00000000
 
-#define CFG_DBAT6U	0x00000000
-#define CFG_DBAT6L	0x00000000
+#define CONFIG_SYS_DBAT6U	0x00000000
+#define CONFIG_SYS_DBAT6L	0x00000000
 
-#define CFG_DBAT7U	0x00000000
-#define CFG_DBAT7L	0x00000000
+#define CONFIG_SYS_DBAT7U	0x00000000
+#define CONFIG_SYS_DBAT7L	0x00000000
 
 /* I2C addresses for the two DIMM SPD chips */
 #define DIMM0_I2C_ADDR	0x51
@@ -365,41 +365,41 @@
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define CFG_BOOTMAPSZ	(8<<20)	/* Initial Memory map for Linux */
+#define CONFIG_SYS_BOOTMAPSZ	(8<<20)	/* Initial Memory map for Linux */
 
 /*-----------------------------------------------------------------------
  * FLASH organization
  */
-#define CFG_MAX_FLASH_BANKS	1		/* Flash can be at one of two addresses */
+#define CONFIG_SYS_MAX_FLASH_BANKS	1		/* Flash can be at one of two addresses */
 #define FLASH_BANK_SIZE		0x01000000	/* 16 MB Total */
-#define CFG_FLASH_BANKS_LIST	{ CFG_FLASH_BASE, /* CFG_FLASH_BASE2 */ }
+#define CONFIG_SYS_FLASH_BANKS_LIST	{ CONFIG_SYS_FLASH_BASE, /* CONFIG_SYS_FLASH_BASE2 */ }
 
 #define CONFIG_FLASH_CFI_DRIVER
-#define CFG_FLASH_CFI
-#define CFG_WRITE_SWAPPED_DATA
+#define CONFIG_SYS_FLASH_CFI
+#define CONFIG_SYS_WRITE_SWAPPED_DATA
 
 #define PHYS_FLASH_SIZE		0x01000000
-#define CFG_MAX_FLASH_SECT	(128)
+#define CONFIG_SYS_MAX_FLASH_SECT	(128)
 
-#define CFG_ENV_IS_IN_NVRAM
-#define CFG_ENV_ADDR		0xFC000000
+#define CONFIG_ENV_IS_IN_NVRAM
+#define CONFIG_ENV_ADDR		0xFC000000
 
-#define CFG_ENV_OFFSET	0x00000000	/* Offset of Environment Sector */
-#define CFG_ENV_SIZE	0x00000400	/* Total Size of Environment Space */
+#define CONFIG_ENV_OFFSET	0x00000000	/* Offset of Environment Sector */
+#define CONFIG_ENV_SIZE	0x00000400	/* Total Size of Environment Space */
 
 /*-----------------------------------------------------------------------
  * Cache Configuration
  */
-#define CFG_CACHELINE_SIZE	32	/* For all MPC74xx CPUs */
+#define CONFIG_SYS_CACHELINE_SIZE	32	/* For all MPC74xx CPUs */
 #if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value */
+#define CONFIG_SYS_CACHELINE_SHIFT	5	/* log base 2 of the above value */
 #endif
 
 /*-----------------------------------------------------------------------
  * L2CR setup -- make sure this is right for your board!
  * look in include/mpc74xx.h for the defines used here
  */
-#undef CFG_L2
+#undef CONFIG_SYS_L2
 
 #define L2_INIT		0
 #define L2_ENABLE	(L2_INIT | L2CR_L2E)
@@ -411,5 +411,5 @@
  */
 #define BOOTFLAG_COLD	0x01	/* Normal Power-On: Boot from FLASH */
 #define BOOTFLAG_WARM	0x02	/* Software reboot */
-#define CFG_SERIAL_HANG_IN_EXCEPTION
+#define CONFIG_SYS_SERIAL_HANG_IN_EXCEPTION
 #endif	/* __CONFIG_H */
diff --git a/include/configs/mpr2.h b/include/configs/mpr2.h
index 3df6e39f4..6ebb1e17b 100644
--- a/include/configs/mpr2.h
+++ b/include/configs/mpr2.h
@@ -46,44 +46,44 @@
 #define CONFIG_MPR2		1
 
 /* U-Boot internals */
-#define CFG_LONGHELP			/* undef to save memory	*/
-#define CFG_PROMPT		"=> "	/* Monitor Command Prompt */
-#define CFG_CBSIZE		256	/* Buffer size for input from the Console */
-#define CFG_PBSIZE		256	/* Buffer size for Console output */
-#define CFG_MAXARGS		16	/* max args accepted for monitor commands */
-#define CFG_BARGSIZE		512	/* Buffer size for Boot Arguments passed to kernel */
-#define CFG_BAUDRATE_TABLE	{ 115200 }	/* List of legal baudrate settings for this board */
-#define CFG_LOAD_ADDR		(CFG_SDRAM_BASE + 32 * 1024 * 1024)
-#define CFG_MONITOR_BASE	CFG_FLASH_BASE
-#define CFG_MONITOR_LEN		(128 * 1024)
-#define CFG_MALLOC_LEN		(256 * 1024)
-#define CFG_GBL_DATA_SIZE	256
+#define CONFIG_SYS_LONGHELP			/* undef to save memory	*/
+#define CONFIG_SYS_PROMPT		"=> "	/* Monitor Command Prompt */
+#define CONFIG_SYS_CBSIZE		256	/* Buffer size for input from the Console */
+#define CONFIG_SYS_PBSIZE		256	/* Buffer size for Console output */
+#define CONFIG_SYS_MAXARGS		16	/* max args accepted for monitor commands */
+#define CONFIG_SYS_BARGSIZE		512	/* Buffer size for Boot Arguments passed to kernel */
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 115200 }	/* List of legal baudrate settings for this board */
+#define CONFIG_SYS_LOAD_ADDR		(CONFIG_SYS_SDRAM_BASE + 32 * 1024 * 1024)
+#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_FLASH_BASE
+#define CONFIG_SYS_MONITOR_LEN		(128 * 1024)
+#define CONFIG_SYS_MALLOC_LEN		(256 * 1024)
+#define CONFIG_SYS_GBL_DATA_SIZE	256
 
 /* Memory */
-#define CFG_SDRAM_BASE		0x8C000000
-#define CFG_SDRAM_SIZE		(64 * 1024 * 1024)
-#define CFG_MEMTEST_START	CFG_SDRAM_BASE
-#define CFG_MEMTEST_END		(CFG_MEMTEST_START + (60 * 1024 * 1024))
+#define CONFIG_SYS_SDRAM_BASE		0x8C000000
+#define CONFIG_SYS_SDRAM_SIZE		(64 * 1024 * 1024)
+#define CONFIG_SYS_MEMTEST_START	CONFIG_SYS_SDRAM_BASE
+#define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_MEMTEST_START + (60 * 1024 * 1024))
 
 /* Flash */
-#define CFG_FLASH_CFI
+#define CONFIG_SYS_FLASH_CFI
 #define CONFIG_FLASH_CFI_DRIVER
-#define CFG_FLASH_EMPTY_INFO
-#define CFG_FLASH_BASE		0xA0000000
-#define CFG_MAX_FLASH_SECT	256
-#define CFG_MAX_FLASH_BANKS	1
-#define CFG_FLASH_BANKS_LIST	{ CFG_FLASH_BASE }
-#define CFG_ENV_IS_IN_FLASH
-#define CFG_ENV_SECT_SIZE	(128 * 1024)
-#define CFG_ENV_SIZE		CFG_ENV_SECT_SIZE
-#define CFG_ENV_ADDR		(CFG_MONITOR_BASE + CFG_MONITOR_LEN)
-#define CFG_FLASH_ERASE_TOUT	120000
-#define CFG_FLASH_WRITE_TOUT	500
+#define CONFIG_SYS_FLASH_EMPTY_INFO
+#define CONFIG_SYS_FLASH_BASE		0xA0000000
+#define CONFIG_SYS_MAX_FLASH_SECT	256
+#define CONFIG_SYS_MAX_FLASH_BANKS	1
+#define CONFIG_SYS_FLASH_BANKS_LIST	{ CONFIG_SYS_FLASH_BASE }
+#define CONFIG_ENV_IS_IN_FLASH
+#define CONFIG_ENV_SECT_SIZE	(128 * 1024)
+#define CONFIG_ENV_SIZE		CONFIG_ENV_SECT_SIZE
+#define CONFIG_ENV_ADDR		(CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)
+#define CONFIG_SYS_FLASH_ERASE_TOUT	120000
+#define CONFIG_SYS_FLASH_WRITE_TOUT	500
 
 /* Clocks */
 #define CONFIG_SYS_CLK_FREQ	24000000
 #define TMU_CLK_DIVIDER		4	/* 4 (default), 16, 64, 256 or 1024 */
-#define CFG_HZ			(CONFIG_SYS_CLK_FREQ / TMU_CLK_DIVIDER)
+#define CONFIG_SYS_HZ			(CONFIG_SYS_CLK_FREQ / TMU_CLK_DIVIDER)
 
 /* UART */
 #define CONFIG_SCIF_CONSOLE	1
diff --git a/include/configs/ms7720se.h b/include/configs/ms7720se.h
index 1c3d2771b..520bac074 100644
--- a/include/configs/ms7720se.h
+++ b/include/configs/ms7720se.h
@@ -52,75 +52,75 @@
 #define MS7720SE_FLASH_BASE_1		0xA0000000
 #define MS7720SE_FLASH_BANK_SIZE	(8 * 1024 * 1024)
 
-#define CFG_LONGHELP		/* undef to save memory	*/
-#define CFG_PROMPT	"=> "	/* Monitor Command Prompt */
-#define CFG_CBSIZE	256	/* Buffer size for input from the Console */
-#define CFG_PBSIZE	256	/* Buffer size for Console output */
-#define CFG_MAXARGS	16	/* max args accepted for monitor commands */
+#define CONFIG_SYS_LONGHELP		/* undef to save memory	*/
+#define CONFIG_SYS_PROMPT	"=> "	/* Monitor Command Prompt */
+#define CONFIG_SYS_CBSIZE	256	/* Buffer size for input from the Console */
+#define CONFIG_SYS_PBSIZE	256	/* Buffer size for Console output */
+#define CONFIG_SYS_MAXARGS	16	/* max args accepted for monitor commands */
 /* Buffer size for Boot Arguments passed to kernel */
-#define CFG_BARGSIZE	512
+#define CONFIG_SYS_BARGSIZE	512
 /* List of legal baudrate settings for this board */
-#define CFG_BAUDRATE_TABLE	{ 115200 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 115200 }
 
 /* SCIF */
 #define CONFIG_SCIF_CONSOLE	1
 #define CONFIG_CONS_SCIF0	1
 
-#define CFG_MEMTEST_START	MS7720SE_SDRAM_BASE
-#define CFG_MEMTEST_END		(CFG_MEMTEST_START + (60 * 1024 * 1024))
+#define CONFIG_SYS_MEMTEST_START	MS7720SE_SDRAM_BASE
+#define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_MEMTEST_START + (60 * 1024 * 1024))
 
-#define CFG_SDRAM_BASE		MS7720SE_SDRAM_BASE
-#define CFG_SDRAM_SIZE		(64 * 1024 * 1024)
+#define CONFIG_SYS_SDRAM_BASE		MS7720SE_SDRAM_BASE
+#define CONFIG_SYS_SDRAM_SIZE		(64 * 1024 * 1024)
 
-#define CFG_LOAD_ADDR		(CFG_SDRAM_BASE + 32 * 1024 * 1024)
-#define CFG_MONITOR_BASE	MS7720SE_FLASH_BASE_1
-#define CFG_MONITOR_LEN		(128 * 1024)
-#define CFG_MALLOC_LEN		(256 * 1024)
-#define CFG_GBL_DATA_SIZE	256
-#define CFG_BOOTMAPSZ		(8 * 1024 * 1024)
+#define CONFIG_SYS_LOAD_ADDR		(CONFIG_SYS_SDRAM_BASE + 32 * 1024 * 1024)
+#define CONFIG_SYS_MONITOR_BASE	MS7720SE_FLASH_BASE_1
+#define CONFIG_SYS_MONITOR_LEN		(128 * 1024)
+#define CONFIG_SYS_MALLOC_LEN		(256 * 1024)
+#define CONFIG_SYS_GBL_DATA_SIZE	256
+#define CONFIG_SYS_BOOTMAPSZ		(8 * 1024 * 1024)
 
 
 /* FLASH */
-#define CFG_FLASH_CFI
+#define CONFIG_SYS_FLASH_CFI
 #define CONFIG_FLASH_CFI_DRIVER
-#undef  CFG_FLASH_QUIET_TEST
-#define CFG_FLASH_EMPTY_INFO	/* print 'E' for empty sector on flinfo */
+#undef  CONFIG_SYS_FLASH_QUIET_TEST
+#define CONFIG_SYS_FLASH_EMPTY_INFO	/* print 'E' for empty sector on flinfo */
 
-#define CFG_FLASH_BASE		MS7720SE_FLASH_BASE_1
+#define CONFIG_SYS_FLASH_BASE		MS7720SE_FLASH_BASE_1
 
-#define CFG_MAX_FLASH_SECT	150
-#define CFG_MAX_FLASH_BANKS	1
-#define CFG_FLASH_BANKS_LIST	{ CFG_FLASH_BASE }
+#define CONFIG_SYS_MAX_FLASH_SECT	150
+#define CONFIG_SYS_MAX_FLASH_BANKS	1
+#define CONFIG_SYS_FLASH_BANKS_LIST	{ CONFIG_SYS_FLASH_BASE }
 
-#define CFG_ENV_IS_IN_FLASH
-#define CFG_ENV_SECT_SIZE	(64 * 1024)
-#define CFG_ENV_SIZE		CFG_ENV_SECT_SIZE
-#define CFG_ENV_ADDR		(CFG_MONITOR_BASE + CFG_MONITOR_LEN)
-#define CFG_FLASH_ERASE_TOUT	120000
-#define CFG_FLASH_WRITE_TOUT	500
+#define CONFIG_ENV_IS_IN_FLASH
+#define CONFIG_ENV_SECT_SIZE	(64 * 1024)
+#define CONFIG_ENV_SIZE		CONFIG_ENV_SECT_SIZE
+#define CONFIG_ENV_ADDR		(CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)
+#define CONFIG_SYS_FLASH_ERASE_TOUT	120000
+#define CONFIG_SYS_FLASH_WRITE_TOUT	500
 
 /* Board Clock */
 #define CONFIG_SYS_CLK_FREQ	33333333
 #define TMU_CLK_DIVIDER		4	/* 4 (default), 16, 64, 256 or 1024 */
-#define CFG_HZ			(CONFIG_SYS_CLK_FREQ / TMU_CLK_DIVIDER)
+#define CONFIG_SYS_HZ			(CONFIG_SYS_CLK_FREQ / TMU_CLK_DIVIDER)
 
 /* PCMCIA */
 #define CONFIG_IDE_PCMCIA	1
 #define CONFIG_MARUBUN_PCCARD	1
 #define CONFIG_PCMCIA_SLOT_A	1
-#define CFG_IDE_MAXDEVICE	1
-#define CFG_MARUBUN_MRSHPC	0xb83fffe0
-#define CFG_MARUBUN_MW1		0xb8400000
-#define CFG_MARUBUN_MW2		0xb8500000
-#define CFG_MARUBUN_IO		0xb8600000
-
-#define CFG_PIO_MODE		1
-#define CFG_IDE_MAXBUS		1
+#define CONFIG_SYS_IDE_MAXDEVICE	1
+#define CONFIG_SYS_MARUBUN_MRSHPC	0xb83fffe0
+#define CONFIG_SYS_MARUBUN_MW1		0xb8400000
+#define CONFIG_SYS_MARUBUN_MW2		0xb8500000
+#define CONFIG_SYS_MARUBUN_IO		0xb8600000
+
+#define CONFIG_SYS_PIO_MODE		1
+#define CONFIG_SYS_IDE_MAXBUS		1
 #define CONFIG_DOS_PARTITION	1
-#define CFG_ATA_BASE_ADDR	CFG_MARUBUN_IO	/* base address */
-#define CFG_ATA_IDE0_OFFSET	0x01F0		/* ide0 offste */
-#define CFG_ATA_DATA_OFFSET	0		/* data reg offset */
-#define CFG_ATA_REG_OFFSET	0		/* reg offset */
-#define CFG_ATA_ALT_OFFSET	0x200		/* alternate register offset */
+#define CONFIG_SYS_ATA_BASE_ADDR	CONFIG_SYS_MARUBUN_IO	/* base address */
+#define CONFIG_SYS_ATA_IDE0_OFFSET	0x01F0		/* ide0 offste */
+#define CONFIG_SYS_ATA_DATA_OFFSET	0		/* data reg offset */
+#define CONFIG_SYS_ATA_REG_OFFSET	0		/* reg offset */
+#define CONFIG_SYS_ATA_ALT_OFFSET	0x200		/* alternate register offset */
 
 #endif	/* __MS7720SE_H */
diff --git a/include/configs/ms7722se.h b/include/configs/ms7722se.h
index 3809e7120..52020047d 100644
--- a/include/configs/ms7722se.h
+++ b/include/configs/ms7722se.h
@@ -31,10 +31,13 @@
 #define CONFIG_MS7722SE		1
 
 #define CONFIG_CMD_FLASH
+#define CONFIG_CMD_JFFS2
 #define CONFIG_CMD_NET
+#define CONFIG_CMD_NFS
 #define CONFIG_CMD_PING
 #define CONFIG_CMD_DFL
 #define CONFIG_CMD_SDRAM
+#define CONFIG_CMD_MEMORY
 #define CONFIG_CMD_ENV
 
 #define CONFIG_BAUDRATE		115200
@@ -53,79 +56,79 @@
 #define MS7722SE_FLASH_BASE_1	(0xA0000000)
 #define MS7722SE_FLASH_BANK_SIZE	(8*1024 * 1024)
 
-#define CFG_LONGHELP				/* undef to save memory	*/
-#define CFG_PROMPT		"=> "		/* Monitor Command Prompt */
-#define CFG_CBSIZE		256		/* Buffer size for input from the Console */
-#define CFG_PBSIZE		256		/* Buffer size for Console output */
-#define CFG_MAXARGS		16		/* max args accepted for monitor commands */
-#define CFG_BARGSIZE		512		/* Buffer size for Boot Arguments passed to kernel */
-#define CFG_BAUDRATE_TABLE	{ 115200 }	/* List of legal baudrate settings for this board */
+#define CONFIG_SYS_LONGHELP				/* undef to save memory	*/
+#define CONFIG_SYS_PROMPT		"=> "		/* Monitor Command Prompt */
+#define CONFIG_SYS_CBSIZE		256		/* Buffer size for input from the Console */
+#define CONFIG_SYS_PBSIZE		256		/* Buffer size for Console output */
+#define CONFIG_SYS_MAXARGS		16		/* max args accepted for monitor commands */
+#define CONFIG_SYS_BARGSIZE		512		/* Buffer size for Boot Arguments passed to kernel */
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 115200 }	/* List of legal baudrate settings for this board */
 
 /* SCIF */
 #define CONFIG_SCIF_CONSOLE	1
 #define CONFIG_CONS_SCIF0	1
-#undef  CFG_CONSOLE_INFO_QUIET			/* Suppress display of console information at boot */
-#undef  CFG_CONSOLE_OVERWRITE_ROUTINE
-#undef  CFG_CONSOLE_ENV_OVERWRITE
+#undef  CONFIG_SYS_CONSOLE_INFO_QUIET			/* Suppress display of console information at boot */
+#undef  CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
+#undef  CONFIG_SYS_CONSOLE_ENV_OVERWRITE
 
-#define CFG_MEMTEST_START	(MS7722SE_SDRAM_BASE)
-#define CFG_MEMTEST_END		(CFG_MEMTEST_START + (60 * 1024 * 1024))
+#define CONFIG_SYS_MEMTEST_START	(MS7722SE_SDRAM_BASE)
+#define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_MEMTEST_START + (60 * 1024 * 1024))
 
-#undef  CFG_ALT_MEMTEST		/* Enable alternate, more extensive, memory test */
-#undef  CFG_MEMTEST_SCRATCH	/* Scratch address used by the alternate memory test */
+#undef  CONFIG_SYS_ALT_MEMTEST		/* Enable alternate, more extensive, memory test */
+#undef  CONFIG_SYS_MEMTEST_SCRATCH	/* Scratch address used by the alternate memory test */
 
-#undef  CFG_LOADS_BAUD_CHANGE	/* Enable temporary baudrate change while serial download */
+#undef  CONFIG_SYS_LOADS_BAUD_CHANGE	/* Enable temporary baudrate change while serial download */
 
-#define CFG_SDRAM_BASE	(MS7722SE_SDRAM_BASE)
-#define CFG_SDRAM_SIZE	(64 * 1024 * 1024)	/* maybe more, but if so u-boot doesn't know about it... */
+#define CONFIG_SYS_SDRAM_BASE	(MS7722SE_SDRAM_BASE)
+#define CONFIG_SYS_SDRAM_SIZE	(64 * 1024 * 1024)	/* maybe more, but if so u-boot doesn't know about it... */
 
-#define CFG_LOAD_ADDR	(CFG_SDRAM_BASE + 4 * 1024 * 1024)	/* default load address for scripts ?!? */
+#define CONFIG_SYS_LOAD_ADDR	(CONFIG_SYS_SDRAM_BASE + 4 * 1024 * 1024)	/* default load address for scripts ?!? */
 
-#define CFG_MONITOR_BASE	(MS7722SE_FLASH_BASE_1)	/* Address of u-boot image
+#define CONFIG_SYS_MONITOR_BASE	(MS7722SE_FLASH_BASE_1)	/* Address of u-boot image
 							in Flash (NOT run time address in SDRAM) ?!? */
-#define CFG_MONITOR_LEN	(128 * 1024)		/* */
-#define CFG_MALLOC_LEN	(256 * 1024)		/* Size of DRAM reserved for malloc() use */
-#define CFG_GBL_DATA_SIZE	(256)		/* size in bytes reserved for initial data */
-#define CFG_BOOTMAPSZ	(8 * 1024 * 1024)
+#define CONFIG_SYS_MONITOR_LEN	(128 * 1024)		/* */
+#define CONFIG_SYS_MALLOC_LEN	(256 * 1024)		/* Size of DRAM reserved for malloc() use */
+#define CONFIG_SYS_GBL_DATA_SIZE	(256)		/* size in bytes reserved for initial data */
+#define CONFIG_SYS_BOOTMAPSZ	(8 * 1024 * 1024)
 
 /* FLASH */
-#define CFG_FLASH_CFI
+#define CONFIG_SYS_FLASH_CFI
 #define CONFIG_FLASH_CFI_DRIVER
-#undef  CFG_FLASH_QUIET_TEST
-#define CFG_FLASH_EMPTY_INFO			/* print 'E' for empty sector on flinfo */
+#undef  CONFIG_SYS_FLASH_QUIET_TEST
+#define CONFIG_SYS_FLASH_EMPTY_INFO			/* print 'E' for empty sector on flinfo */
 
-#define CFG_FLASH_BASE		(MS7722SE_FLASH_BASE_1)	/* Physical start address of Flash memory */
+#define CONFIG_SYS_FLASH_BASE		(MS7722SE_FLASH_BASE_1)	/* Physical start address of Flash memory */
 
-#define CFG_MAX_FLASH_SECT	150		/* Max number of sectors on each
+#define CONFIG_SYS_MAX_FLASH_SECT	150		/* Max number of sectors on each
 							Flash chip */
 
 /* if you use all NOR Flash , you change dip-switch. Please see MS7722SE01 Manual. */
-#define CFG_MAX_FLASH_BANKS	2
-#define CFG_FLASH_BANKS_LIST	{ CFG_FLASH_BASE + (0 * MS7722SE_FLASH_BANK_SIZE), \
-				  CFG_FLASH_BASE + (1 * MS7722SE_FLASH_BANK_SIZE), \
+#define CONFIG_SYS_MAX_FLASH_BANKS	2
+#define CONFIG_SYS_FLASH_BANKS_LIST	{ CONFIG_SYS_FLASH_BASE + (0 * MS7722SE_FLASH_BANK_SIZE), \
+				  CONFIG_SYS_FLASH_BASE + (1 * MS7722SE_FLASH_BANK_SIZE), \
 				}
 
-#define CFG_FLASH_ERASE_TOUT	(3 * 1000)	/* Timeout for Flash erase operations (in ms) */
-#define CFG_FLASH_WRITE_TOUT	(3 * 1000)	/* Timeout for Flash write operations (in ms) */
-#define CFG_FLASH_LOCK_TOUT	(3 * 1000)	/* Timeout for Flash set sector lock bit operations (in ms) */
-#define CFG_FLASH_UNLOCK_TOUT	(3 * 1000)	/* Timeout for Flash clear lock bit operations (in ms) */
+#define CONFIG_SYS_FLASH_ERASE_TOUT	(3 * 1000)	/* Timeout for Flash erase operations (in ms) */
+#define CONFIG_SYS_FLASH_WRITE_TOUT	(3 * 1000)	/* Timeout for Flash write operations (in ms) */
+#define CONFIG_SYS_FLASH_LOCK_TOUT	(3 * 1000)	/* Timeout for Flash set sector lock bit operations (in ms) */
+#define CONFIG_SYS_FLASH_UNLOCK_TOUT	(3 * 1000)	/* Timeout for Flash clear lock bit operations (in ms) */
 
-#undef  CFG_FLASH_PROTECTION			/* Use hardware flash sectors protection instead of U-Boot software protection */
+#undef  CONFIG_SYS_FLASH_PROTECTION			/* Use hardware flash sectors protection instead of U-Boot software protection */
 
-#undef  CFG_DIRECT_FLASH_TFTP
+#undef  CONFIG_SYS_DIRECT_FLASH_TFTP
 
-#define CFG_ENV_IS_IN_FLASH
+#define CONFIG_ENV_IS_IN_FLASH
 #define CONFIG_ENV_OVERWRITE	1
-#define CFG_ENV_SECT_SIZE	(8 * 1024)
-#define CFG_ENV_SIZE		(CFG_ENV_SECT_SIZE)
-#define CFG_ENV_ADDR		(CFG_FLASH_BASE + (1 * CFG_ENV_SECT_SIZE))
-#define CFG_ENV_OFFSET		(CFG_ENV_ADDR - CFG_FLASH_BASE)	/* Offset of env Flash sector relative to CFG_FLASH_BASE */
-#define CFG_ENV_SIZE_REDUND	(CFG_ENV_SECT_SIZE)
-#define CFG_ENV_ADDR_REDUND	(CFG_FLASH_BASE + (2 * CFG_ENV_SECT_SIZE))
+#define CONFIG_ENV_SECT_SIZE	(8 * 1024)
+#define CONFIG_ENV_SIZE		(CONFIG_ENV_SECT_SIZE)
+#define CONFIG_ENV_ADDR		(CONFIG_SYS_FLASH_BASE + (1 * CONFIG_ENV_SECT_SIZE))
+#define CONFIG_ENV_OFFSET		(CONFIG_ENV_ADDR - CONFIG_SYS_FLASH_BASE)	/* Offset of env Flash sector relative to CONFIG_SYS_FLASH_BASE */
+#define CONFIG_ENV_SIZE_REDUND	(CONFIG_ENV_SECT_SIZE)
+#define CONFIG_ENV_ADDR_REDUND	(CONFIG_SYS_FLASH_BASE + (2 * CONFIG_ENV_SECT_SIZE))
 
 /* Board Clock */
 #define CONFIG_SYS_CLK_FREQ	33333333
 #define TMU_CLK_DIVIDER		(4)	/* 4 (default), 16, 64, 256 or 1024 */
-#define CFG_HZ			(CONFIG_SYS_CLK_FREQ / TMU_CLK_DIVIDER)
+#define CONFIG_SYS_HZ			(CONFIG_SYS_CLK_FREQ / TMU_CLK_DIVIDER)
 
 #endif	/* __MS7722SE_H */
diff --git a/include/configs/ms7750se.h b/include/configs/ms7750se.h
index 4356a671e..af9933cad 100644
--- a/include/configs/ms7750se.h
+++ b/include/configs/ms7750se.h
@@ -52,56 +52,56 @@
 #define CONFIG_ENV_OVERWRITE	1
 
 /* SDRAM */
-#define CFG_SDRAM_BASE		(0x8C000000)
-#define CFG_SDRAM_SIZE		(64 * 1024 * 1024)
-
-#define CFG_LONGHELP
-#define CFG_PROMPT		"=> "
-#define CFG_CBSIZE		256
-#define CFG_PBSIZE		256
-#define CFG_MAXARGS		16
-#define CFG_BARGSIZE		512
+#define CONFIG_SYS_SDRAM_BASE		(0x8C000000)
+#define CONFIG_SYS_SDRAM_SIZE		(64 * 1024 * 1024)
+
+#define CONFIG_SYS_LONGHELP
+#define CONFIG_SYS_PROMPT		"=> "
+#define CONFIG_SYS_CBSIZE		256
+#define CONFIG_SYS_PBSIZE		256
+#define CONFIG_SYS_MAXARGS		16
+#define CONFIG_SYS_BARGSIZE		512
 /* List of legal baudrate settings for this board */
-#define CFG_BAUDRATE_TABLE	{ 115200, 57600, 38400, 19200, 9600 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 115200, 57600, 38400, 19200, 9600 }
 
-#define CFG_MEMTEST_START	(CFG_SDRAM_BASE)
-#define CFG_MEMTEST_END		(TEXT_BASE - 0x100000)
+#define CONFIG_SYS_MEMTEST_START	(CONFIG_SYS_SDRAM_BASE)
+#define CONFIG_SYS_MEMTEST_END		(TEXT_BASE - 0x100000)
 
 /* NOR Flash */
-/* #define CFG_FLASH_BASE		(0xA1000000)*/
-#define CFG_FLASH_BASE		(0xA0000000)
-#define CFG_MAX_FLASH_BANKS	(1)	/* Max number of
+/* #define CONFIG_SYS_FLASH_BASE		(0xA1000000)*/
+#define CONFIG_SYS_FLASH_BASE		(0xA0000000)
+#define CONFIG_SYS_MAX_FLASH_BANKS	(1)	/* Max number of
 					 * Flash memory banks
 					 */
-#define CFG_MAX_FLASH_SECT	142
-#define CFG_FLASH_BANKS_LIST	{ CFG_FLASH_BASE }
+#define CONFIG_SYS_MAX_FLASH_SECT	142
+#define CONFIG_SYS_FLASH_BANKS_LIST	{ CONFIG_SYS_FLASH_BASE }
 
-#define CFG_LOAD_ADDR		(CFG_SDRAM_BASE + 4 * 1024 * 1024)
-#define CFG_MONITOR_BASE	(CFG_FLASH_BASE)	/* Address of u-boot image in Flash */
-#define CFG_MONITOR_LEN		(128 * 1024)
-#define CFG_MALLOC_LEN		(256 * 1024)		/* Size of DRAM reserved for malloc() use */
+#define CONFIG_SYS_LOAD_ADDR		(CONFIG_SYS_SDRAM_BASE + 4 * 1024 * 1024)
+#define CONFIG_SYS_MONITOR_BASE	(CONFIG_SYS_FLASH_BASE)	/* Address of u-boot image in Flash */
+#define CONFIG_SYS_MONITOR_LEN		(128 * 1024)
+#define CONFIG_SYS_MALLOC_LEN		(256 * 1024)		/* Size of DRAM reserved for malloc() use */
 
-#define CFG_GBL_DATA_SIZE	(256)			/* size in bytes reserved for initial data */
-#define CFG_BOOTMAPSZ		(8 * 1024 * 1024)
-#define CFG_RX_ETH_BUFFER	(8)
+#define CONFIG_SYS_GBL_DATA_SIZE	(256)			/* size in bytes reserved for initial data */
+#define CONFIG_SYS_BOOTMAPSZ		(8 * 1024 * 1024)
+#define CONFIG_SYS_RX_ETH_BUFFER	(8)
 
-#define CFG_FLASH_CFI
+#define CONFIG_SYS_FLASH_CFI
 #define CONFIG_FLASH_CFI_DRIVER
-#undef CFG_FLASH_CFI_BROKEN_TABLE
-#undef  CFG_FLASH_QUIET_TEST
-#define CFG_FLASH_EMPTY_INFO				/* print 'E' for empty sector on flinfo */
+#undef CONFIG_SYS_FLASH_CFI_BROKEN_TABLE
+#undef  CONFIG_SYS_FLASH_QUIET_TEST
+#define CONFIG_SYS_FLASH_EMPTY_INFO				/* print 'E' for empty sector on flinfo */
 
 
-#define CFG_ENV_IS_IN_FLASH
-#define CFG_ENV_SECT_SIZE	0x20000
-#define CFG_ENV_SIZE		(CFG_ENV_SECT_SIZE)
-#define CFG_ENV_ADDR		(CFG_MONITOR_BASE + CFG_MONITOR_LEN)
-#define CFG_FLASH_ERASE_TOUT	120000
-#define CFG_FLASH_WRITE_TOUT	500
+#define CONFIG_ENV_IS_IN_FLASH
+#define CONFIG_ENV_SECT_SIZE	0x20000
+#define CONFIG_ENV_SIZE		(CONFIG_ENV_SECT_SIZE)
+#define CONFIG_ENV_ADDR		(CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)
+#define CONFIG_SYS_FLASH_ERASE_TOUT	120000
+#define CONFIG_SYS_FLASH_WRITE_TOUT	500
 
 /* Board Clock */
 #define CONFIG_SYS_CLK_FREQ	33333333
 #define TMU_CLK_DIVIDER		4
-#define CFG_HZ			(CONFIG_SYS_CLK_FREQ / TMU_CLK_DIVIDER)
+#define CONFIG_SYS_HZ			(CONFIG_SYS_CLK_FREQ / TMU_CLK_DIVIDER)
 
 #endif /* __MS7750SE_H */
diff --git a/include/configs/muas3001.h b/include/configs/muas3001.h
index 77e115877..f031a17b2 100644
--- a/include/configs/muas3001.h
+++ b/include/configs/muas3001.h
@@ -38,6 +38,9 @@
 /* Do boardspecific init */
 #define CONFIG_BOARD_EARLY_INIT_R       1
 
+/* enable Watchdog */
+#define CONFIG_WATCHDOG		1
+
 /*
  * Select serial console configuration
  *
@@ -77,39 +80,39 @@
  * - Rx-CLK is CLK11
  * - Tx-CLK is CLK12
  */
-# define CFG_CMXFCR_VALUE	(CMXFCR_RF1CS_CLK11 | CMXFCR_TF1CS_CLK12)
-# define CFG_CMXFCR_MASK	(CMXFCR_FC1 | CMXFCR_RF1CS_MSK | CMXFCR_TF1CS_MSK)
+# define CONFIG_SYS_CMXFCR_VALUE	(CMXFCR_RF1CS_CLK11 | CMXFCR_TF1CS_CLK12)
+# define CONFIG_SYS_CMXFCR_MASK	(CMXFCR_FC1 | CMXFCR_RF1CS_MSK | CMXFCR_TF1CS_MSK)
 /*
  * - RAM for BD/Buffers is on the 60x Bus (see 28-13)
  */
-# define CFG_CPMFCR_RAMTYPE	(0)
+# define CONFIG_SYS_CPMFCR_RAMTYPE	(0)
 /* know on local Bus */
-/* define CFG_CPMFCR_RAMTYPE	(CPMFCR_DTB | CPMFCR_BDB) */
+/* define CONFIG_SYS_CPMFCR_RAMTYPE	(CPMFCR_DTB | CPMFCR_BDB) */
 /*
  * - Enable Full Duplex in FSMR
  */
-# define CFG_FCC_PSMR		(FCC_PSMR_FDE|FCC_PSMR_LPB)
+# define CONFIG_SYS_FCC_PSMR		(FCC_PSMR_FDE|FCC_PSMR_LPB)
 
 #define CONFIG_MII			/* MII PHY management		*/
 #define CONFIG_BITBANGMII		/* bit-bang MII PHY management	*/
-# define CFG_PHY_ADDR		1
+# define CONFIG_SYS_PHY_ADDR		1
 /*
  * GPIO pins used for bit-banged MII communications
  */
 #define MDIO_PORT	0		/* Port A */
 
-#define CFG_MDIO_PIN	0x00200000	/* PA10 */
-#define CFG_MDC_PIN	0x00400000	/* PA9  */
+#define CONFIG_SYS_MDIO_PIN	0x00200000	/* PA10 */
+#define CONFIG_SYS_MDC_PIN	0x00400000	/* PA9  */
 
-#define MDIO_ACTIVE	(iop->pdir |=  CFG_MDIO_PIN)
-#define MDIO_TRISTATE	(iop->pdir &= ~CFG_MDIO_PIN)
-#define MDIO_READ	((iop->pdat &  CFG_MDIO_PIN) != 0)
+#define MDIO_ACTIVE	(iop->pdir |=  CONFIG_SYS_MDIO_PIN)
+#define MDIO_TRISTATE	(iop->pdir &= ~CONFIG_SYS_MDIO_PIN)
+#define MDIO_READ	((iop->pdat &  CONFIG_SYS_MDIO_PIN) != 0)
 
-#define MDIO(bit)	if(bit) iop->pdat |=  CFG_MDIO_PIN; \
-			else	iop->pdat &= ~CFG_MDIO_PIN
+#define MDIO(bit)	if(bit) iop->pdat |=  CONFIG_SYS_MDIO_PIN; \
+			else	iop->pdat &= ~CONFIG_SYS_MDIO_PIN
 
-#define MDC(bit)	if(bit) iop->pdat |=  CFG_MDC_PIN; \
-			else	iop->pdat &= ~CFG_MDC_PIN
+#define MDC(bit)	if(bit) iop->pdat |=  CONFIG_SYS_MDC_PIN; \
+			else	iop->pdat &= ~CONFIG_SYS_MDC_PIN
 
 #define MIIDELAY	udelay(1)
 
@@ -124,6 +127,7 @@
  */
 #include <config_cmd_default.h>
 
+#define CONFIG_CMD_DTT
 #define CONFIG_CMD_ECHO
 #define CONFIG_CMD_IMMAP
 #define CONFIG_CMD_MII
@@ -181,112 +185,131 @@
 #define CONFIG_BOOTCOMMAND	"run net_nfs"
 #define CONFIG_BOOTDELAY	5	/* autoboot after 5 seconds */
 
-#undef	CONFIG_WATCHDOG			/* disable platform specific watchdog */
-
 /*
  * Miscellaneous configurable options
  */
-#define CFG_HUSH_PARSER
-#define CFG_PROMPT_HUSH_PS2	"> "
-#define CFG_LONGHELP			/* undef to save memory	    */
-#define CFG_PROMPT		"=> "	/* Monitor Command Prompt   */
+#define CONFIG_SYS_HUSH_PARSER
+#define CONFIG_SYS_PROMPT_HUSH_PS2	"> "
+#define CONFIG_SYS_LONGHELP			/* undef to save memory	    */
+#define CONFIG_SYS_PROMPT		"=> "	/* Monitor Command Prompt   */
 #if defined(CONFIG_CMD_KGDB)
-#define CFG_CBSIZE		1024	/* Console I/O Buffer Size  */
+#define CONFIG_SYS_CBSIZE		1024	/* Console I/O Buffer Size  */
 #else
-#define CFG_CBSIZE		256	/* Console I/O Buffer Size  */
+#define CONFIG_SYS_CBSIZE		256	/* Console I/O Buffer Size  */
 #endif
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16)	/* Print Buffer Size  */
-#define CFG_MAXARGS		16		/* max number of command args */
-#define CFG_BARGSIZE		CFG_CBSIZE	/* Boot Argument Buffer Size  */
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)	/* Print Buffer Size  */
+#define CONFIG_SYS_MAXARGS		16		/* max number of command args */
+#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size  */
 
-#define CFG_MEMTEST_START	0x00100000	/* memtest works on */
-#define CFG_MEMTEST_END		0x00f00000	/* 1 ... 15 MB in DRAM	*/
+#define CONFIG_SYS_MEMTEST_START	0x00100000	/* memtest works on */
+#define CONFIG_SYS_MEMTEST_END		0x00f00000	/* 1 ... 15 MB in DRAM	*/
 
-#define CFG_LOAD_ADDR		0x100000	/* default load address */
+#define CONFIG_SYS_LOAD_ADDR		0x100000	/* default load address */
 
-#define CFG_HZ			1000	/* decrementer freq: 1 ms ticks */
+#define CONFIG_SYS_HZ			1000	/* decrementer freq: 1 ms ticks */
 
-#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
 
-#define CFG_SDRAM_BASE		0x00000000
-#define CFG_FLASH_BASE		0xFF000000
-#define CFG_FLASH_SIZE		32
-#define CFG_FLASH_CFI
+#define CONFIG_SYS_SDRAM_BASE		0x00000000
+#define CONFIG_SYS_FLASH_BASE		0xFF000000
+#define CONFIG_SYS_FLASH_SIZE		32
+#define CONFIG_SYS_FLASH_CFI
 #define CONFIG_FLASH_CFI_DRIVER
-#define CFG_MAX_FLASH_BANKS	1	/* max num of flash banks	*/
-#define CFG_MAX_FLASH_SECT	512	/* max num of sects on one chip */
+#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max num of flash banks	*/
+#define CONFIG_SYS_MAX_FLASH_SECT	512	/* max num of sects on one chip */
 
-#define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE }
+#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE }
 
-#define CFG_MONITOR_BASE	TEXT_BASE
-#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
-#define CFG_RAMBOOT
+#define CONFIG_SYS_MONITOR_BASE	TEXT_BASE
+#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
+#define CONFIG_SYS_RAMBOOT
 #endif
 
-#define CFG_MONITOR_LEN		(256 << 10)	/* Reserve 256KB for Monitor */
+#define CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 256KB for Monitor */
 
-#define CFG_ENV_IS_IN_FLASH
+#define CONFIG_ENV_IS_IN_FLASH
 
-#ifdef CFG_ENV_IS_IN_FLASH
-#define CFG_ENV_SECT_SIZE	0x10000
-#define CFG_ENV_ADDR		(CFG_MONITOR_BASE + CFG_MONITOR_LEN)
-#endif /* CFG_ENV_IS_IN_FLASH */
+#ifdef CONFIG_ENV_IS_IN_FLASH
+#define CONFIG_ENV_SECT_SIZE	0x10000
+#define CONFIG_ENV_ADDR		(CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)
+#endif /* CONFIG_ENV_IS_IN_FLASH */
 
 /*
  * I2C Bus
  */
 #define CONFIG_HARD_I2C		1	/* To enable I2C support	*/
-#define CFG_I2C_SPEED		100000	/* I2C speed and slave address	*/
-#define CFG_I2C_SLAVE		0x7F
-
-#define CFG_IMMR		0xF0000000
-#define CFG_DEFAULT_IMMR	0x0F010000
-
-#define CFG_INIT_RAM_ADDR	CFG_IMMR
-#define CFG_INIT_RAM_END	0x2000	/* End of used area in DPRAM	*/
-#define CFG_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_I2C_SPEED		100000	/* I2C speed and slave address	*/
+#define CONFIG_SYS_I2C_SLAVE		0x7F
+
+#define	CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
+/* I2C SYSMON (LM75, AD7414 is almost compatible)                       */
+#define	CONFIG_DTT_LM75		1	/* ON Semi's LM75               */
+#define	CONFIG_DTT_SENSORS	{0}	/* Sensor addresses             */
+#define	CONFIG_SYS_DTT_MAX_TEMP	70
+#define	CONFIG_SYS_DTT_LOW_TEMP	-30
+#define	CONFIG_SYS_DTT_HYSTERESIS	3
+
+#define CONFIG_SYS_IMMR		0xF0000000
+#define CONFIG_SYS_DEFAULT_IMMR	0x0F010000
+
+#define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_IMMR
+#define CONFIG_SYS_INIT_RAM_END	0x2000	/* End of used area in DPRAM	*/
+#define CONFIG_SYS_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
 /* Hard reset configuration word */
-#define CFG_HRCW_MASTER		0x0E028200	/* BPS=11 CIP=1 ISB=010 BMS=1 */
+#define CONFIG_SYS_HRCW_MASTER		0x0E028200	/* BPS=11 CIP=1 ISB=010 BMS=1 */
 
 /* No slaves */
-#define CFG_HRCW_SLAVE1 	0
-#define CFG_HRCW_SLAVE2 	0
-#define CFG_HRCW_SLAVE3 	0
-#define CFG_HRCW_SLAVE4 	0
-#define CFG_HRCW_SLAVE5 	0
-#define CFG_HRCW_SLAVE6 	0
-#define CFG_HRCW_SLAVE7 	0
+#define CONFIG_SYS_HRCW_SLAVE1 	0
+#define CONFIG_SYS_HRCW_SLAVE2 	0
+#define CONFIG_SYS_HRCW_SLAVE3 	0
+#define CONFIG_SYS_HRCW_SLAVE4 	0
+#define CONFIG_SYS_HRCW_SLAVE5 	0
+#define CONFIG_SYS_HRCW_SLAVE6 	0
+#define CONFIG_SYS_HRCW_SLAVE7 	0
 
 #define BOOTFLAG_COLD		0x01	/* Normal Power-On: Boot from FLASH */
 #define BOOTFLAG_WARM		0x02	/* Software reboot                  */
 
-#define CFG_MALLOC_LEN		(4096 << 10)	/* Reserve 4 MB for malloc()	*/
-#define CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
+#define CONFIG_SYS_MALLOC_LEN		(4096 << 10)	/* Reserve 4 MB for malloc()	*/
+#define CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
 
-#define CFG_CACHELINE_SIZE	32	/* For MPC8260 CPUs */
+#define CONFIG_SYS_CACHELINE_SIZE	32	/* For MPC8260 CPUs */
 #if defined(CONFIG_CMD_KGDB)
-#  define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value */
+#  define CONFIG_SYS_CACHELINE_SHIFT	5	/* log base 2 of the above value */
 #endif
 
-#define CFG_HID0_INIT		0
-#define CFG_HID0_FINAL		(HID0_ICE | HID0_IFEM | HID0_ABE)
+#define CONFIG_SYS_HID0_INIT		0
+#define CONFIG_SYS_HID0_FINAL		(HID0_ICE | HID0_IFEM | HID0_ABE)
 
-#define CFG_HID2		0
+#define CONFIG_SYS_HID2		0
 
-#define CFG_SIUMCR		0x00200000
-#define CFG_SYPCR		0xFFFFFFC3
-#define CFG_BCR			0x004c0000
-#define CFG_SCCR		0x0
+#define CONFIG_SYS_SIUMCR		0x00200000
+#define CONFIG_SYS_BCR			0x004c0000
+#define CONFIG_SYS_SCCR		0x0
+
+/*-----------------------------------------------------------------------
+ * SYPCR - System Protection Control                             4-35
+ * SYPCR can only be written once after reset!
+ *-----------------------------------------------------------------------
+ * Watchdog & Bus Monitor Timer max, 60x Bus Monitor enable
+ */
+#if defined(CONFIG_WATCHDOG)
+#define CONFIG_SYS_SYPCR       (SYPCR_SWTC|SYPCR_BMT|SYPCR_PBME|SYPCR_LBME|\
+			 SYPCR_SWRI|SYPCR_SWP|SYPCR_SWE)
+#else
+#define CONFIG_SYS_SYPCR       (SYPCR_SWTC|SYPCR_BMT|SYPCR_PBME|SYPCR_LBME|\
+			 SYPCR_SWRI|SYPCR_SWP)
+#endif /* CONFIG_WATCHDOG */
 
 /*-----------------------------------------------------------------------
  * RMR - Reset Mode Register                                     5-5
  *-----------------------------------------------------------------------
  * turn on Checkstop Reset Enable
  */
-#define CFG_RMR         0
+#define CONFIG_SYS_RMR         0
 
 /*-----------------------------------------------------------------------
  * TMCNTSC - Time Counter Status and Control                     4-40
@@ -294,7 +317,7 @@
  * Clear once per Second and Alarm Interrupt Status, Set 32KHz timersclk,
  * and enable Time Counter
  */
-#define CFG_TMCNTSC     (TMCNTSC_SEC|TMCNTSC_ALR|TMCNTSC_TCF|TMCNTSC_TCE)
+#define CONFIG_SYS_TMCNTSC     (TMCNTSC_SEC|TMCNTSC_ALR|TMCNTSC_TCF|TMCNTSC_TCE)
 
 /*-----------------------------------------------------------------------
  * PISCR - Periodic Interrupt Status and Control                 4-42
@@ -302,13 +325,13 @@
  * Clear Periodic Interrupt Status, Set 32KHz timersclk, and enable
  * Periodic timer
  */
-#define CFG_PISCR       (PISCR_PS|PISCR_PTF|PISCR_PTE)
+#define CONFIG_SYS_PISCR       (PISCR_PS|PISCR_PTF|PISCR_PTE)
 
 /*-----------------------------------------------------------------------
  * RCCR - RISC Controller Configuration                         13-7
  *-----------------------------------------------------------------------
  */
-#define CFG_RCCR        0
+#define CONFIG_SYS_RCCR        0
 
 /*
  * Init Memory Controller:
@@ -322,54 +345,60 @@
  */
 /* Bank 0 - FLASH
  */
-#define CFG_BR0_PRELIM  ((CFG_FLASH_BASE & BRx_BA_MSK)	|\
+#define CONFIG_SYS_BR0_PRELIM  ((CONFIG_SYS_FLASH_BASE & BRx_BA_MSK)	|\
 			 BRx_PS_32			|\
 			 BRx_MS_GPCM_P			|\
 			 BRx_V)
 
-#define CFG_OR0_PRELIM (0xff000020)
+#define CONFIG_SYS_OR0_PRELIM (0xff000020)
 
 /* Bank 1 - 60x bus SDRAM
  */
-#define SDRAM_MAX_SIZE	0x08000000	/* max. 128 MB		*/
-#define CFG_GLOBAL_SDRAM_LIMIT	(128 << 20)	/* less than 128 MB */
+#define CONFIG_SYS_GLOBAL_SDRAM_LIMIT	(256 << 20)	/* less than 256 MB */
 
-#define CFG_MPTPR       0x2800
+#define CONFIG_SYS_MPTPR       0x2800
 
 /*-----------------------------------------------------------------------------
  * Address for Mode Register Set (MRS) command
  *-----------------------------------------------------------------------------
  */
-#define CFG_MRS_OFFS	0x00000110
-#define CFG_PSRT        0x13
+#define CONFIG_SYS_MRS_OFFS	0x00000110
+#define CONFIG_SYS_PSRT        0x13
 
-#define CFG_BR1_PRELIM  ((CFG_SDRAM_BASE & BRx_BA_MSK)  |\
+#define CONFIG_SYS_BR1_PRELIM  ((CONFIG_SYS_SDRAM_BASE & BRx_BA_MSK)  |\
 			 BRx_PS_64                      |\
 			 BRx_MS_SDRAM_P                 |\
 			 BRx_V)
 
-#define CFG_OR1_PRELIM	CFG_OR1
+#define CONFIG_SYS_OR1_PRELIM	CONFIG_SYS_OR1_LITTLE
 
 /* SDRAM initialization values
 */
-#define CFG_OR1    ((~(CFG_GLOBAL_SDRAM_LIMIT-1) & ORxS_SDAM_MSK) |\
+#define CONFIG_SYS_OR1_LITTLE	((~(CONFIG_SYS_GLOBAL_SDRAM_LIMIT-1) & ORxS_SDAM_MSK) |\
 			 ORxS_BPD_4                     |\
 			 ORxS_ROWST_PBI1_A7		|\
 			 ORxS_NUMR_12)
 
-#define CFG_PSDMR	0x004b36a3
+#define CONFIG_SYS_PSDMR_LITTLE	0x004b36a3
+
+#define CONFIG_SYS_OR1_BIG	((~(CONFIG_SYS_GLOBAL_SDRAM_LIMIT-1) & ORxS_SDAM_MSK) |\
+			 ORxS_BPD_4                     |\
+			 ORxS_ROWST_PBI1_A4		|\
+			 ORxS_NUMR_12)
+
+#define CONFIG_SYS_PSDMR_BIG		0x014f36a3
 
 /* IO on CS4 initialization values
 */
-#define CFG_IO_BASE	0xc0000000
-#define CFG_IO_SIZE	1
+#define CONFIG_SYS_IO_BASE	0xc0000000
+#define CONFIG_SYS_IO_SIZE	1
 
-#define CFG_BR4_PRELIM	((CFG_IO_BASE & BRx_BA_MSK) |\
-			 BRx_PS_32 | BRx_MS_GPCM_L | BRx_V)
+#define CONFIG_SYS_BR4_PRELIM	((CONFIG_SYS_IO_BASE & BRx_BA_MSK) |\
+			 BRx_PS_16 | BRx_MS_GPCM_L | BRx_V)
 
-#define CFG_OR4_PRELIM	(0xfff80020)
+#define CONFIG_SYS_OR4_PRELIM	(0xfff80020)
 
-#define	CFG_RESET_ADDRESS 0xFDFFFFFC	/* "bad" address		*/
+#define	CONFIG_SYS_RESET_ADDRESS 0xFDFFFFFC	/* "bad" address		*/
 
 /* pass open firmware flat tree */
 #define CONFIG_OF_LIBFDT	1
diff --git a/include/configs/mucmc52.h b/include/configs/mucmc52.h
index 18200ec81..2f48a0f25 100644
--- a/include/configs/mucmc52.h
+++ b/include/configs/mucmc52.h
@@ -36,14 +36,14 @@
 #define	CONFIG_MPC5200		1	/* (more precisely an MPC5200 CPU)	*/
 #define	CONFIG_MUCMC52		1	/* MUCMC52 board			*/
 
-#define	CFG_MPC5XXX_CLKIN	33000000 /* ... running at 33.000000MHz		*/
+#define	CONFIG_SYS_MPC5XXX_CLKIN	33000000 /* ... running at 33.000000MHz		*/
 
 #define	BOOTFLAG_COLD		0x01	/* Normal Power-On: Boot from FLASH	*/
 #define	BOOTFLAG_WARM		0x02	/* Software reboot			*/
 
-#define	CFG_CACHELINE_SIZE	32	/* For MPC5xxx CPUs			*/
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
-#  define	CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value	*/
+#define	CONFIG_SYS_CACHELINE_SIZE	32	/* For MPC5xxx CPUs			*/
+#if (CONFIG_COMMANDS & CONFIG_SYS_CMD_KGDB)
+#  define	CONFIG_SYS_CACHELINE_SHIFT	5	/* log base 2 of the above value	*/
 #endif
 
 #define	CONFIG_BOARD_EARLY_INIT_R
@@ -56,7 +56,7 @@
  */
 #define	CONFIG_PSC_CONSOLE	1	/* console is on PSC1	*/
 #define	CONFIG_BAUDRATE		38400	/* ... at 38400 bps	*/
-#define	CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
+#define	CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
 
 /* Partitions */
 #define	CONFIG_DOS_PARTITION
@@ -83,7 +83,7 @@
 #define	CONFIG_TIMESTAMP	1	/* Print image info with timestamp */
 
 #if (TEXT_BASE == 0xFFF00000) /* Boot low */
-#   define	CFG_LOWBOOT		1
+#   define	CONFIG_SYS_LOWBOOT		1
 #endif
 
 /*
@@ -118,79 +118,77 @@
 /*
  * IPB Bus clocking configuration.
  */
-#undef	CFG_IPBCLK_EQUALS_XLBCLK		/* define for 133MHz speed */
+#undef	CONFIG_SYS_IPBCLK_EQUALS_XLBCLK		/* define for 133MHz speed */
 
 /*
  * I2C configuration
  */
 #define	CONFIG_HARD_I2C		1	/* I2C with hardware support */
-#define	CFG_I2C_MODULE		2	/* Select I2C module #1 or #2 */
+#define	CONFIG_SYS_I2C_MODULE		2	/* Select I2C module #1 or #2 */
 
-#define	CFG_I2C_SPEED		100000 /* 100 kHz */
-#define	CFG_I2C_SLAVE		0x7F
+#define	CONFIG_SYS_I2C_SPEED		100000 /* 100 kHz */
+#define	CONFIG_SYS_I2C_SLAVE		0x7F
 
 /*
  * EEPROM configuration
  */
-#define	CFG_I2C_EEPROM_ADDR		0x58
-#define	CFG_I2C_EEPROM_ADDR_LEN		1
-#define	CFG_EEPROM_PAGE_WRITE_BITS	4
-#define	CFG_EEPROM_PAGE_WRITE_DELAY_MS	10
-/* for LM81 */
-#define	CFG_EEPROM_PAGE_WRITE_ENABLE
+#define	CONFIG_SYS_I2C_EEPROM_ADDR		0x58
+#define	CONFIG_SYS_I2C_EEPROM_ADDR_LEN		1
+#define	CONFIG_SYS_EEPROM_PAGE_WRITE_BITS	4
+#define	CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	10
 
 /*
  * RTC configuration
  */
 #define	CONFIG_RTC_PCF8563
-#define	CFG_I2C_RTC_ADDR		0x51
+#define	CONFIG_SYS_I2C_RTC_ADDR		0x51
 
 /* I2C SYSMON (LM75) */
 #define	CONFIG_DTT_LM81			1	/* ON Semi's LM75		*/
 #define	CONFIG_DTT_SENSORS		{0}	/* Sensor addresses		*/
-#define	CFG_DTT_MAX_TEMP		70
-#define	CFG_DTT_LOW_TEMP		-30
-#define	CFG_DTT_HYSTERESIS		3
+#define	CONFIG_SYS_DTT_MAX_TEMP		70
+#define	CONFIG_SYS_DTT_LOW_TEMP		-30
+#define	CONFIG_SYS_DTT_HYSTERESIS		3
 
 /*
  * Flash configuration
  */
-#define	CFG_FLASH_BASE		0xFF800000
+#define	CONFIG_SYS_FLASH_BASE		0xFF800000
 
-#define	CFG_FLASH_SIZE		0x00800000 /* 8 MByte */
-#define	CFG_MAX_FLASH_SECT	67	/* max num of sects on one chip */
+#define	CONFIG_SYS_FLASH_SIZE		0x00800000 /* 8 MByte */
+#define	CONFIG_SYS_MAX_FLASH_SECT	67	/* max num of sects on one chip */
 
-#define	CFG_ENV_ADDR		(TEXT_BASE+0x40000) /* second sector */
-#define	CFG_MAX_FLASH_BANKS	1	/* max num of flash banks
+#define	CONFIG_ENV_ADDR		(TEXT_BASE+0x40000) /* second sector */
+#define	CONFIG_SYS_MAX_FLASH_BANKS	1	/* max num of flash banks
 					   (= chip selects) */
-#define	CFG_FLASH_ERASE_TOUT	240000	/* Flash Erase Timeout (in ms)	*/
-#define	CFG_FLASH_WRITE_TOUT	500	/* Flash Write Timeout (in ms)	*/
+#define	CONFIG_SYS_FLASH_ERASE_TOUT	240000	/* Flash Erase Timeout (in ms)	*/
+#define	CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Flash Write Timeout (in ms)	*/
 
 #define	CONFIG_FLASH_CFI_DRIVER
-#define	CFG_FLASH_CFI
-#define	CFG_FLASH_EMPTY_INFO
-#define	CFG_FLASH_CFI_AMD_RESET
+#define	CONFIG_SYS_FLASH_CFI
+#define	CONFIG_SYS_FLASH_EMPTY_INFO
+#define	CONFIG_SYS_FLASH_CFI_AMD_RESET
 
 /*
  * Environment settings
  */
-#define	CFG_ENV_IS_IN_FLASH	1
-#define	CFG_ENV_SIZE		0x4000
-#define	CFG_ENV_SECT_SIZE	0x20000
-#define	CFG_ENV_OFFSET_REDUND   (CFG_ENV_OFFSET+CFG_ENV_SECT_SIZE)
-#define	CFG_ENV_SIZE_REDUND     (CFG_ENV_SIZE)
+#define	CONFIG_ENV_IS_IN_FLASH	1
+#define	CONFIG_ENV_SIZE		0x4000
+#define	CONFIG_ENV_SECT_SIZE	0x20000
+#define	CONFIG_ENV_OFFSET_REDUND   (CONFIG_ENV_OFFSET+CONFIG_ENV_SECT_SIZE)
+#define	CONFIG_ENV_SIZE_REDUND     (CONFIG_ENV_SIZE)
 
 /*
  * Memory map
  */
-#define	CFG_MBAR		0xF0000000
-#define	CFG_SDRAM_BASE		0x00000000
-#define	CFG_DEFAULT_MBAR	0x80000000
-#define	CFG_DISPLAY_BASE	0x80600000
-#define	CFG_STATUS1_BASE	0x80600200
-#define	CFG_STATUS2_BASE	0x80600300
-#define	CFG_PMI_UNI_BASE	0x80800000
-#define	CFG_PMI_BROAD_BASE	0x80810000
+#define	CONFIG_SYS_MBAR		0xF0000000
+#define	CONFIG_SYS_SDRAM_BASE		0x00000000
+#define	CONFIG_SYS_DEFAULT_MBAR	0x80000000
+#define	CONFIG_SYS_DISPLAY_BASE	0x80600000
+#define	CONFIG_SYS_STATUS1_BASE	0x80600200
+#define	CONFIG_SYS_STATUS2_BASE	0x80600300
+#define	CONFIG_SYS_PMI_UNI_BASE	0x80800000
+#define	CONFIG_SYS_PMI_BROAD_BASE	0x80810000
 
 /* Settings for XLB = 132 MHz */
 #define	SDRAM_DDR	 1
@@ -202,26 +200,26 @@
 #define	SDRAM_TAPDELAY  0x10000000
 
 /* Use ON-Chip SRAM until RAM will be available */
-#define	CFG_INIT_RAM_ADDR	MPC5XXX_SRAM
+#define	CONFIG_SYS_INIT_RAM_ADDR	MPC5XXX_SRAM
 #ifdef CONFIG_POST
 /* preserve space for the post_word at end of on-chip SRAM */
-#define	CFG_INIT_RAM_END	MPC5XXX_SRAM_POST_SIZE
+#define	CONFIG_SYS_INIT_RAM_END	MPC5XXX_SRAM_POST_SIZE
 #else
-#define	CFG_INIT_RAM_END	MPC5XXX_SRAM_SIZE
+#define	CONFIG_SYS_INIT_RAM_END	MPC5XXX_SRAM_SIZE
 #endif
 
-#define	CFG_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
-#define	CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define	CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+#define	CONFIG_SYS_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
+#define	CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define	CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
-#define	CFG_MONITOR_BASE	TEXT_BASE
-#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
-#   define	CFG_RAMBOOT	1
+#define	CONFIG_SYS_MONITOR_BASE	TEXT_BASE
+#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
+#   define	CONFIG_SYS_RAMBOOT	1
 #endif
 
-#define	CFG_MONITOR_LEN		(192 << 10)	/* Reserve 192 kB for Monitor	*/
-#define	CFG_MALLOC_LEN		(512 << 10)	/* Reserve 128 kB for malloc()	*/
-#define	CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
+#define	CONFIG_SYS_MONITOR_LEN		(192 << 10)	/* Reserve 192 kB for Monitor	*/
+#define	CONFIG_SYS_MALLOC_LEN		(512 << 10)	/* Reserve 128 kB for malloc()	*/
+#define	CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
 
 /*
  * Ethernet configuration
@@ -233,7 +231,7 @@
 /*
  * GPIO configuration
  */
-#define	CFG_GPS_PORT_CONFIG	0x8D550644
+#define	CONFIG_SYS_GPS_PORT_CONFIG	0x8D550644
 
 /*use  Hardware WDT */
 #define CONFIG_HW_WATCHDOG
@@ -241,29 +239,29 @@
 /*
  * Miscellaneous configurable options
  */
-#define	CFG_LONGHELP			/* undef to save memory	    */
-#define	CFG_PROMPT		"=> "	/* Monitor Command Prompt   */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
-#define	CFG_CBSIZE		1024	/* Console I/O Buffer Size  */
+#define	CONFIG_SYS_LONGHELP			/* undef to save memory	    */
+#define	CONFIG_SYS_PROMPT		"=> "	/* Monitor Command Prompt   */
+#if (CONFIG_COMMANDS & CONFIG_SYS_CMD_KGDB)
+#define	CONFIG_SYS_CBSIZE		1024	/* Console I/O Buffer Size  */
 #else
-#define	CFG_CBSIZE		256	/* Console I/O Buffer Size  */
+#define	CONFIG_SYS_CBSIZE		256	/* Console I/O Buffer Size  */
 #endif
-#define	CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define	CFG_MAXARGS		16	/* max number of command args	*/
-#define	CFG_BARGSIZE		CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+#define	CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define	CONFIG_SYS_MAXARGS		16	/* max number of command args	*/
+#define	CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
 
 /* Enable an alternate, more extensive memory test */
-#define	CFG_ALT_MEMTEST
+#define	CONFIG_SYS_ALT_MEMTEST
 
-#define	CFG_MEMTEST_START	0x00100000	/* memtest works on */
-#define	CFG_MEMTEST_END		0x00f00000	/* 1 ... 15 MB in DRAM	*/
+#define	CONFIG_SYS_MEMTEST_START	0x00100000	/* memtest works on */
+#define	CONFIG_SYS_MEMTEST_END		0x00f00000	/* 1 ... 15 MB in DRAM	*/
 
-#define	CFG_LOAD_ADDR		0x100000	/* default load address */
+#define	CONFIG_SYS_LOAD_ADDR		0x100000	/* default load address */
 
-#define	CFG_HZ			1000	/* decrementer freq: 1 ms ticks */
+#define	CONFIG_SYS_HZ			1000	/* decrementer freq: 1 ms ticks */
 
 /*
- * Enable loopw commando. This has only affect, if CFG_CMD_MEM is defined,
+ * Enable loopw commando. This has only affect, if CONFIG_SYS_CMD_MEM is defined,
  * which is normally part of the default commands (CFV_CMD_DFL)
  */
 #define	CONFIG_LOOPW
@@ -272,46 +270,46 @@
  * Various low-level settings
  */
 #if defined(CONFIG_MPC5200)
-#define	CFG_HID0_INIT		HID0_ICE | HID0_ICFI
-#define	CFG_HID0_FINAL		HID0_ICE
+#define	CONFIG_SYS_HID0_INIT		HID0_ICE | HID0_ICFI
+#define	CONFIG_SYS_HID0_FINAL		HID0_ICE
 #else
-#define	CFG_HID0_INIT		0
-#define	CFG_HID0_FINAL		0
+#define	CONFIG_SYS_HID0_INIT		0
+#define	CONFIG_SYS_HID0_FINAL		0
 #endif
 
-#define	CFG_BOOTCS_START	CFG_FLASH_BASE
-#define	CFG_BOOTCS_SIZE		CFG_FLASH_SIZE
-#define	CFG_BOOTCS_CFG		0x0004FB00
-#define	CFG_CS0_START		CFG_FLASH_BASE
-#define	CFG_CS0_SIZE		CFG_FLASH_SIZE
+#define	CONFIG_SYS_BOOTCS_START	CONFIG_SYS_FLASH_BASE
+#define	CONFIG_SYS_BOOTCS_SIZE		CONFIG_SYS_FLASH_SIZE
+#define	CONFIG_SYS_BOOTCS_CFG		0x0004FB00
+#define	CONFIG_SYS_CS0_START		CONFIG_SYS_FLASH_BASE
+#define	CONFIG_SYS_CS0_SIZE		CONFIG_SYS_FLASH_SIZE
 
 /* 8Mbit SRAM @0x80100000 */
-#define	CFG_CS1_START		0x80100000
-#define	CFG_CS1_SIZE		0x00100000
-#define	CFG_CS1_CFG		0x00019B00
+#define	CONFIG_SYS_CS1_START		0x80100000
+#define	CONFIG_SYS_CS1_SIZE		0x00100000
+#define	CONFIG_SYS_CS1_CFG		0x00019B00
 
 /* FRAM 32Kbyte @0x80700000 */
-#define	CFG_CS2_START		0x80700000
-#define	CFG_CS2_SIZE		0x00008000
-#define	CFG_CS2_CFG		0x00019800
+#define	CONFIG_SYS_CS2_START		0x80700000
+#define	CONFIG_SYS_CS2_SIZE		0x00008000
+#define	CONFIG_SYS_CS2_CFG		0x00019800
 
 /* Display H1, Status Inputs, EPLD @0x80600000 */
-#define	CFG_CS3_START		0x80600000
-#define	CFG_CS3_SIZE		0x00100000
-#define	CFG_CS3_CFG		0x00019800
+#define	CONFIG_SYS_CS3_START		0x80600000
+#define	CONFIG_SYS_CS3_SIZE		0x00100000
+#define	CONFIG_SYS_CS3_CFG		0x00019800
 
 /* PMI Unicast 32Kbyte @0x80800000 */
-#define	CFG_CS6_START		CFG_PMI_UNI_BASE
-#define	CFG_CS6_SIZE		0x00008000
-#define	CFG_CS6_CFG		0xFFFFF930
+#define	CONFIG_SYS_CS6_START		CONFIG_SYS_PMI_UNI_BASE
+#define	CONFIG_SYS_CS6_SIZE		0x00008000
+#define	CONFIG_SYS_CS6_CFG		0xFFFFF930
 
 /* PMI Broadcast 32Kbyte @0x80810000 */
-#define	CFG_CS7_START		CFG_PMI_BROAD_BASE
-#define	CFG_CS7_SIZE		0x00008000
-#define	CFG_CS7_CFG		0xFF00F930
+#define	CONFIG_SYS_CS7_START		CONFIG_SYS_PMI_BROAD_BASE
+#define	CONFIG_SYS_CS7_SIZE		0x00008000
+#define	CONFIG_SYS_CS7_CFG		0xFF00F930
 
-#define	CFG_CS_BURST		0x00000000
-#define	CFG_CS_DEADCYCLE	0x33333333
+#define	CONFIG_SYS_CS_BURST		0x00000000
+#define	CONFIG_SYS_CS_DEADCYCLE	0x33333333
 
 /*-----------------------------------------------------------------------
  * IDE/ATA stuff Supports IDE harddisk
@@ -323,26 +321,26 @@
 #undef	CONFIG_IDE_8xx_DIRECT		/* Direct IDE    not supported	*/
 #undef	CONFIG_IDE_LED			/* LED   for ide not supported	*/
 
-#define	CFG_IDE_MAXBUS		1	/* max. 1 IDE bus		*/
-#define	CFG_IDE_MAXDEVICE	1	/* max. 2 drives per IDE bus	*/
+#define	CONFIG_SYS_IDE_MAXBUS		1	/* max. 1 IDE bus		*/
+#define	CONFIG_SYS_IDE_MAXDEVICE	1	/* max. 2 drives per IDE bus	*/
 
 #define	CONFIG_IDE_PREINIT	1
 
-#define	CFG_ATA_IDE0_OFFSET	0x0000
+#define	CONFIG_SYS_ATA_IDE0_OFFSET	0x0000
 
-#define	CFG_ATA_BASE_ADDR	MPC5XXX_ATA
+#define	CONFIG_SYS_ATA_BASE_ADDR	MPC5XXX_ATA
 
 /* Offset for data I/O			*/
-#define	CFG_ATA_DATA_OFFSET	(0x0060)
+#define	CONFIG_SYS_ATA_DATA_OFFSET	(0x0060)
 
 /* Offset for normal register accesses	*/
-#define	CFG_ATA_REG_OFFSET	(CFG_ATA_DATA_OFFSET)
+#define	CONFIG_SYS_ATA_REG_OFFSET	(CONFIG_SYS_ATA_DATA_OFFSET)
 
 /* Offset for alternate registers	*/
-#define	CFG_ATA_ALT_OFFSET	(0x005C)
+#define	CONFIG_SYS_ATA_ALT_OFFSET	(0x005C)
 
 /* Interval between registers           */
-#define	CFG_ATA_STRIDE          4
+#define	CONFIG_SYS_ATA_STRIDE          4
 
 #define	CONFIG_ATAPI            1
 
@@ -364,13 +362,13 @@
 #define	CONFIG_PCI_IO_PHYS	CONFIG_PCI_IO_BUS
 #define	CONFIG_PCI_IO_SIZE	0x01000000
 
-#define	CFG_ISA_IO		CONFIG_PCI_IO_BUS
+#define	CONFIG_SYS_ISA_IO		CONFIG_PCI_IO_BUS
 
 /*---------------------------------------------------------------------*/
 /* Display addresses						       */
 /*---------------------------------------------------------------------*/
 
-#define	CFG_DISP_CHR_RAM	(CFG_DISPLAY_BASE + 0x38)
-#define	CFG_DISP_CWORD		(CFG_DISPLAY_BASE + 0x30)
+#define	CONFIG_SYS_DISP_CHR_RAM	(CONFIG_SYS_DISPLAY_BASE + 0x38)
+#define	CONFIG_SYS_DISP_CWORD		(CONFIG_SYS_DISPLAY_BASE + 0x30)
 
 #endif /* __CONFIG_H */
diff --git a/include/configs/munices.h b/include/configs/munices.h
index cea283430..7682faa32 100644
--- a/include/configs/munices.h
+++ b/include/configs/munices.h
@@ -31,10 +31,10 @@
 #define CONFIG_MPC5200		1	/* (more precisely an MPC5200 CPU) */
 #define CONFIG_MPC5200_DDR	1	/* (with DDR-SDRAM) */
 #define CONFIG_MUNICES		1	/* ... on MUNICes board */
-#define CFG_MPC5XXX_CLKIN	33333333 /* ... running at 33.333333MHz */
+#define CONFIG_SYS_MPC5XXX_CLKIN	33333333 /* ... running at 33.333333MHz */
 #define BOOTFLAG_COLD		0x01	/* Normal Power-On: Boot from FLASH  */
 #define BOOTFLAG_WARM		0x02	/* Software reboot	     */
-#define CFG_CACHELINE_SIZE	32	/* For MPC5xxx CPUs */
+#define CONFIG_SYS_CACHELINE_SIZE	32	/* For MPC5xxx CPUs */
 #define CONFIG_HIGH_BATS	1	/* High BATs supported */
 
 /*
@@ -50,7 +50,7 @@
 #define CONFIG_CMD_REGINFO
 
 #if defined(CONFIG_CMD_KGDB)
-#  define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value */
+#  define CONFIG_SYS_CACHELINE_SHIFT	5	/* log base 2 of the above value */
 #endif
 
 /*
@@ -58,7 +58,7 @@
  */
 #define CONFIG_PSC_CONSOLE	1	/* console is on PSC1 */
 #define CONFIG_BAUDRATE		115200	/* ... at 115200 bps */
-#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
 
 #define	CONFIG_TIMESTAMP	1	/* Print image info with timestamp */
 #define CONFIG_BOOTDELAY	5   /* autoboot after 5 seconds */
@@ -91,75 +91,75 @@
 /*
  * IPB Bus clocking configuration.
  */
-#define  CFG_IPBSPEED_133		/* define for 133MHz speed */
-#if defined(CFG_IPBSPEED_133)
+#define  CONFIG_SYS_IPBSPEED_133		/* define for 133MHz speed */
+#if defined(CONFIG_SYS_IPBSPEED_133)
 /*
  * PCI Bus clocking configuration
  *
  * Actually a PCI Clock of 66 MHz is only set (in cpu_init.c) if
- * CFG_IPBSPEED_133 is defined. This is because a PCI Clock of 66 MHz yet hasn't
+ * CONFIG_SYS_IPBSPEED_133 is defined. This is because a PCI Clock of 66 MHz yet hasn't
  * been tested with a IPB Bus Clock of 66 MHz.
  */
-#define CFG_PCISPEED_66		/* define for 66MHz speed */
+#define CONFIG_SYS_PCISPEED_66		/* define for 66MHz speed */
 #else
-#undef CFG_PCISPEED_66			/* for 33MHz speed */
+#undef CONFIG_SYS_PCISPEED_66			/* for 33MHz speed */
 #endif
 
 /*
  * Memory map
  */
-#define CFG_MBAR		0xF0000000 /* MBAR hast to be switched by other bootloader or debugger config  */
+#define CONFIG_SYS_MBAR		0xF0000000 /* MBAR hast to be switched by other bootloader or debugger config  */
 
-#define CFG_DEFAULT_MBAR	0x80000000
-#define CFG_SDRAM_BASE		0x00000000
+#define CONFIG_SYS_DEFAULT_MBAR	0x80000000
+#define CONFIG_SYS_SDRAM_BASE		0x00000000
 /* Use SRAM until RAM will be available */
-#define CFG_INIT_RAM_ADDR	MPC5XXX_SRAM
-#define CFG_INIT_RAM_END	MPC5XXX_SRAM_SIZE	/* End of used area in DPRAM */
-#define CFG_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
-
-#define CFG_MONITOR_BASE    TEXT_BASE
-#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
-#   define CFG_RAMBOOT		1
+#define CONFIG_SYS_INIT_RAM_ADDR	MPC5XXX_SRAM
+#define CONFIG_SYS_INIT_RAM_END	MPC5XXX_SRAM_SIZE	/* End of used area in DPRAM */
+#define CONFIG_SYS_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
+
+#define CONFIG_SYS_MONITOR_BASE    TEXT_BASE
+#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
+#   define CONFIG_SYS_RAMBOOT		1
 #endif
 
-#define CFG_MONITOR_LEN		(192 << 10)	/* Reserve 192 kB for Monitor	*/
-#define CFG_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/
-#define CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
+#define CONFIG_SYS_MONITOR_LEN		(192 << 10)	/* Reserve 192 kB for Monitor	*/
+#define CONFIG_SYS_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/
+#define CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
 
 /*
  * Flash configuration
  */
-#define CFG_FLASH_BASE		0xFF000000
-#define CFG_FLASH_CFI		1	/* Flash is CFI conformant */
+#define CONFIG_SYS_FLASH_BASE		0xFF000000
+#define CONFIG_SYS_FLASH_CFI		1	/* Flash is CFI conformant */
 #define CONFIG_FLASH_CFI_DRIVER	1	/* Use the common driver */
-#define CFG_FLASH_BANKS_LIST	{ CFG_FLASH_BASE }
-#define CFG_FLASH_EMPTY_INFO
-#define CFG_FLASH_SIZE		0x01000000 /* 16 MByte */
-#define CFG_MAX_FLASH_SECT	128	/* max num of sects on one chip */
-#define CFG_MAX_FLASH_BANKS	1	 /* max num of flash banks (= chip selects) */
-#define CFG_FLASH_USE_BUFFER_WRITE	/* not supported yet for AMD */
+#define CONFIG_SYS_FLASH_BANKS_LIST	{ CONFIG_SYS_FLASH_BASE }
+#define CONFIG_SYS_FLASH_EMPTY_INFO
+#define CONFIG_SYS_FLASH_SIZE		0x01000000 /* 16 MByte */
+#define CONFIG_SYS_MAX_FLASH_SECT	128	/* max num of sects on one chip */
+#define CONFIG_SYS_MAX_FLASH_BANKS	1	 /* max num of flash banks (= chip selects) */
+#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE	/* not supported yet for AMD */
 
 /*
  * Chip selects configuration
  */
 /* Boot Chipselect */
-#define CFG_BOOTCS_START	CFG_FLASH_BASE
-#define CFG_BOOTCS_SIZE		CFG_FLASH_SIZE
-#define CFG_BOOTCS_CFG		0x00047800
+#define CONFIG_SYS_BOOTCS_START	CONFIG_SYS_FLASH_BASE
+#define CONFIG_SYS_BOOTCS_SIZE		CONFIG_SYS_FLASH_SIZE
+#define CONFIG_SYS_BOOTCS_CFG		0x00047800
 
 /*
  * Environment settings
  */
-#define CFG_ENV_IS_IN_FLASH	1
-#define CFG_ENV_OFFSET		0x40000
-#define CFG_ENV_ADDR		(TEXT_BASE + CFG_ENV_OFFSET)
-#define CFG_ENV_SECT_SIZE	0x20000
-#define CFG_ENV_SIZE		0x4000
-#define CFG_ENV_OFFSET_REDUND   (CFG_ENV_OFFSET + CFG_ENV_SECT_SIZE)
-#define CFG_ENV_ADDR_REDUND	(TEXT_BASE + CFG_ENV_OFFSET_REDUND)
-#define CFG_ENV_SIZE_REDUND     (CFG_ENV_SIZE)
+#define CONFIG_ENV_IS_IN_FLASH	1
+#define CONFIG_ENV_OFFSET		0x40000
+#define CONFIG_ENV_ADDR		(TEXT_BASE + CONFIG_ENV_OFFSET)
+#define CONFIG_ENV_SECT_SIZE	0x20000
+#define CONFIG_ENV_SIZE		0x4000
+#define CONFIG_ENV_OFFSET_REDUND   (CONFIG_ENV_OFFSET + CONFIG_ENV_SECT_SIZE)
+#define CONFIG_ENV_ADDR_REDUND	(TEXT_BASE + CONFIG_ENV_OFFSET_REDUND)
+#define CONFIG_ENV_SIZE_REDUND     (CONFIG_ENV_SIZE)
 #define CONFIG_ENV_OVERWRITE	1
 
 /*
@@ -172,24 +172,24 @@
 /*
  * GPIO configuration
  */
-#define CFG_GPS_PORT_CONFIG	0x00058044 /* PSC1=UART, PSC2=UART ; Ether=100MBit with MD
+#define CONFIG_SYS_GPS_PORT_CONFIG	0x00058044 /* PSC1=UART, PSC2=UART ; Ether=100MBit with MD
 						no PCI */
 
 /*
  * Miscellaneous configurable options
  */
-#define CFG_LONGHELP			/* undef to save memory	    */
-#define CFG_PROMPT		"=> "	/* Monitor Command Prompt   */
-#define CFG_CBSIZE		1024	/* Console I/O Buffer Size  */
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16)	/* Print Buffer Size */
-#define CFG_MAXARGS		16		/* max number of command args	*/
-#define CFG_BARGSIZE		CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+#define CONFIG_SYS_LONGHELP			/* undef to save memory	    */
+#define CONFIG_SYS_PROMPT		"=> "	/* Monitor Command Prompt   */
+#define CONFIG_SYS_CBSIZE		1024	/* Console I/O Buffer Size  */
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)	/* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS		16		/* max number of command args	*/
+#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
 
-#define CFG_MEMTEST_START	0x00100000	/* memtest works on */
-#define CFG_MEMTEST_END		0x00f00000	/* 1 ... 15 MB in DRAM	*/
+#define CONFIG_SYS_MEMTEST_START	0x00100000	/* memtest works on */
+#define CONFIG_SYS_MEMTEST_END		0x00f00000	/* 1 ... 15 MB in DRAM	*/
 
-#define CFG_LOAD_ADDR		0x200000	/* default load address */
-#define CFG_HZ			1000	/* decrementer freq: 1 ms ticks */
+#define CONFIG_SYS_LOAD_ADDR		0x200000	/* default load address */
+#define CONFIG_SYS_HZ			1000	/* decrementer freq: 1 ms ticks */
 
 #define CONFIG_DISPLAY_BOARDINFO 1
 #define CONFIG_CMDLINE_EDITING  1
@@ -197,12 +197,12 @@
 /*
  * Various low-level settings
  */
-#define CFG_HID0_INIT		HID0_ICE | HID0_ICFI
-#define CFG_HID0_FINAL		HID0_ICE
+#define CONFIG_SYS_HID0_INIT		HID0_ICE | HID0_ICFI
+#define CONFIG_SYS_HID0_FINAL		HID0_ICE
 
-#define CFG_CS_BURST		0x00000000
-#define CFG_CS_DEADCYCLE	0x33333333
-#define CFG_RESET_ADDRESS	0xff000000
+#define CONFIG_SYS_CS_BURST		0x00000000
+#define CONFIG_SYS_CS_DEADCYCLE	0x33333333
+#define CONFIG_SYS_RESET_ADDRESS	0xff000000
 
 /* pass open firmware flat tree */
 #define CONFIG_OF_LIBFDT	1
diff --git a/include/configs/mx1ads.h b/include/configs/mx1ads.h
index 5125b21e0..f136b0ca8 100644
--- a/include/configs/mx1ads.h
+++ b/include/configs/mx1ads.h
@@ -48,19 +48,19 @@
 #define USE_920T_MMU		1
 
 #if 0
-#define CFG_MX1_GPCR		0x000003AB	/* for MX1ADS 0L44N		*/
-#define CFG_MX1_GPCR		0x000003AB	/* for MX1ADS 0L44N		*/
-#define CFG_MX1_GPCR		0x000003AB	/* for MX1ADS 0L44N		*/
+#define CONFIG_SYS_MX1_GPCR		0x000003AB	/* for MX1ADS 0L44N		*/
+#define CONFIG_SYS_MX1_GPCR		0x000003AB	/* for MX1ADS 0L44N		*/
+#define CONFIG_SYS_MX1_GPCR		0x000003AB	/* for MX1ADS 0L44N		*/
 #endif
 
 /*
  * Size of malloc() pool
  */
 
-#define CFG_MALLOC_LEN		(CFG_ENV_SIZE + 128*1024)
+#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + 128*1024)
 
 
-#define CFG_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
 
 /*
  *  CS8900 Ethernet drivers
@@ -113,34 +113,34 @@
  * Miscellaneous configurable options
  */
 
-#define CFG_HUSH_PARSER		1
-#define CFG_PROMPT_HUSH_PS2	"> "
+#define CONFIG_SYS_HUSH_PARSER		1
+#define CONFIG_SYS_PROMPT_HUSH_PS2	"> "
 
-#define CFG_LONGHELP				/* undef to save memory		*/
+#define CONFIG_SYS_LONGHELP				/* undef to save memory		*/
 
-#ifdef CFG_HUSH_PARSER
-#define CFG_PROMPT		"MX1ADS$ "	/* Monitor Command Prompt */
+#ifdef CONFIG_SYS_HUSH_PARSER
+#define CONFIG_SYS_PROMPT		"MX1ADS$ "	/* Monitor Command Prompt */
 #else
-#define CFG_PROMPT		"MX1ADS=> "	/* Monitor Command Prompt */
+#define CONFIG_SYS_PROMPT		"MX1ADS=> "	/* Monitor Command Prompt */
 #endif
 
-#define CFG_CBSIZE		256		/* Console I/O Buffer Size	*/
-#define CFG_PBSIZE		(CFG_CBSIZE+sizeof(CFG_PROMPT)+16)
+#define CONFIG_SYS_CBSIZE		256		/* Console I/O Buffer Size	*/
+#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
 						/* Print Buffer Size */
-#define CFG_MAXARGS		16		/* max number of command args	*/
-#define CFG_BARGSIZE		CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+#define CONFIG_SYS_MAXARGS		16		/* max number of command args	*/
+#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
 
-#define CFG_MEMTEST_START	0x09000000	/* memtest works on	*/
-#define CFG_MEMTEST_END		0x0AF00000	/* 63 MB in DRAM	*/
+#define CONFIG_SYS_MEMTEST_START	0x09000000	/* memtest works on	*/
+#define CONFIG_SYS_MEMTEST_END		0x0AF00000	/* 63 MB in DRAM	*/
 
-#undef	CFG_CLKS_IN_HZ				/* everything, incl board info, in Hz */
-#define CFG_LOAD_ADDR		0x08800000	/* default load address */
-/*#define	CFG_HZ			1000 */
-#define CFG_HZ			3686400
-#define CFG_CPUSPEED		0x141
+#undef	CONFIG_SYS_CLKS_IN_HZ				/* everything, incl board info, in Hz */
+#define CONFIG_SYS_LOAD_ADDR		0x08800000	/* default load address */
+/*#define	CONFIG_SYS_HZ			1000 */
+#define CONFIG_SYS_HZ			3686400
+#define CONFIG_SYS_CPUSPEED		0x141
 
 /* valid baudrates */
-#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
 
 /*-----------------------------------------------------------------------
  * Stack sizes
@@ -161,8 +161,8 @@
 #define PHYS_SDRAM_1		0x08000000	/* SDRAM  on CSD0		*/
 #define PHYS_SDRAM_1_SIZE	0x04000000	/* 64 MB			*/
 
-#define CFG_MAX_FLASH_BANKS	1		/* 1 bank of SyncFlash		*/
-#define CFG_FLASH_BASE		0x0C000000	/* SyncFlash on CSD1		*/
+#define CONFIG_SYS_MAX_FLASH_BANKS	1		/* 1 bank of SyncFlash		*/
+#define CONFIG_SYS_FLASH_BASE		0x0C000000	/* SyncFlash on CSD1		*/
 #define FLASH_BANK_SIZE		0x01000000	/* 16 MB Total			*/
 
 /*-----------------------------------------------------------------------
@@ -171,12 +171,12 @@
 
 #define CONFIG_SYNCFLASH	1
 #define PHYS_FLASH_SIZE		0x01000000
-#define CFG_MAX_FLASH_SECT	(16)
-#define CFG_ENV_ADDR		(CFG_FLASH_BASE+0x00ff8000)
+#define CONFIG_SYS_MAX_FLASH_SECT	(16)
+#define CONFIG_ENV_ADDR		(CONFIG_SYS_FLASH_BASE+0x00ff8000)
 
-#define CFG_ENV_IS_IN_FLASH	1
-#define CFG_ENV_SIZE		0x04000 /* Total Size of Environment Sector */
-#define CFG_ENV_SECT_SIZE	0x100000
+#define CONFIG_ENV_IS_IN_FLASH	1
+#define CONFIG_ENV_SIZE		0x04000 /* Total Size of Environment Sector */
+#define CONFIG_ENV_SECT_SIZE	0x100000
 
 /*-----------------------------------------------------------------------
  * Enable passing ATAGS
diff --git a/include/configs/mx1fs2.h b/include/configs/mx1fs2.h
index d527d098f..aaa4e9852 100644
--- a/include/configs/mx1fs2.h
+++ b/include/configs/mx1fs2.h
@@ -70,22 +70,22 @@
 /*
  * General options for u-boot. Modify to save memory foot print
  */
-#define CFG_LONGHELP				      /* undef saves memory  */
-#define CFG_PROMPT		"mx1fs2> "	      /* prompt string	     */
-#define CFG_CBSIZE		256		      /* console I/O buffer  */
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* print buffer size   */
-#define CFG_MAXARGS		16		      /* max command args    */
-#define CFG_BARGSIZE		CFG_CBSIZE	      /* boot args buf size  */
+#define CONFIG_SYS_LONGHELP				      /* undef saves memory  */
+#define CONFIG_SYS_PROMPT		"mx1fs2> "	      /* prompt string	     */
+#define CONFIG_SYS_CBSIZE		256		      /* console I/O buffer  */
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* print buffer size   */
+#define CONFIG_SYS_MAXARGS		16		      /* max command args    */
+#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	      /* boot args buf size  */
 
-#define CFG_MEMTEST_START	0x08100000	      /* memtest test area   */
-#define CFG_MEMTEST_END		0x08F00000
+#define CONFIG_SYS_MEMTEST_START	0x08100000	      /* memtest test area   */
+#define CONFIG_SYS_MEMTEST_END		0x08F00000
 
-#undef	CFG_CLKS_IN_HZ			     /* use HZ for freq. display     */
+#undef	CONFIG_SYS_CLKS_IN_HZ			     /* use HZ for freq. display     */
 
-#define CFG_HZ			3686400	     /* incrementer freq: 3.6864 MHz */
-#define CFG_CPUSPEED		0x141	     /* core clock - register value  */
+#define CONFIG_SYS_HZ			3686400	     /* incrementer freq: 3.6864 MHz */
+#define CONFIG_SYS_CPUSPEED		0x141	     /* core clock - register value  */
 
-#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
 #define CONFIG_BAUDRATE 115200
 /*
  * Definitions related to passing arguments to kernel.
@@ -98,10 +98,10 @@
 /*
  * Malloc pool need to host env + 128 Kb reserve for other allocations.
  */
-#define CFG_MALLOC_LEN	  (CFG_ENV_SIZE + (128<<10) )
+#define CONFIG_SYS_MALLOC_LEN	  (CONFIG_ENV_SIZE + (128<<10) )
 
 
-#define CFG_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
 
 #define CONFIG_STACKSIZE	(120<<10)      /* stack size */
 
@@ -135,8 +135,8 @@
  * Flash Controller settings
  */
 
-#define CFG_MAX_FLASH_BANKS	1	/* FLASH banks count (not chip count)*/
-#define CFG_MAX_FLASH_SECT	256	/* number of sector in FLASH bank    */
+#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* FLASH banks count (not chip count)*/
+#define CONFIG_SYS_MAX_FLASH_SECT	256	/* number of sector in FLASH bank    */
 
 #ifdef BUS32BIT_VERSION
 #define MX1FS2_FLASH_BUS_WIDTH	4	/* we use 32 bit FLASH memory...     */
@@ -156,12 +156,12 @@
    is not so clear to me. In other words we can provide more informations
    to user, but this expects more complex flash handling we do not provide
    now.*/
-#undef	CFG_FLASH_CFI
+#undef	CONFIG_SYS_FLASH_CFI
 
-#define CFG_FLASH_ERASE_TOUT	(2*CFG_HZ)    /* timeout for Erase operation */
-#define CFG_FLASH_WRITE_TOUT	(2*CFG_HZ)    /* timeout for Write operation */
+#define CONFIG_SYS_FLASH_ERASE_TOUT	(2*CONFIG_SYS_HZ)    /* timeout for Erase operation */
+#define CONFIG_SYS_FLASH_WRITE_TOUT	(2*CONFIG_SYS_HZ)    /* timeout for Write operation */
 
-#define CFG_FLASH_BASE		MX1FS2_FLASH_BASE
+#define CONFIG_SYS_FLASH_BASE		MX1FS2_FLASH_BASE
 
 /*
  * This is setting for JFFS2 support in u-boot.
@@ -205,16 +205,16 @@
  * env. has no sense to us.
  */
 
-#define CFG_MONITOR_BASE	0x10000000
-#define CFG_MONITOR_LEN		0x20000		/* 128b ( 1 flash sector )   */
-#define CFG_ENV_IS_IN_FLASH	1
-#define CFG_ENV_ADDR		0x10020000	/* absolute address for now  */
-#define CFG_ENV_SIZE		0x20000
+#define CONFIG_SYS_MONITOR_BASE	0x10000000
+#define CONFIG_SYS_MONITOR_LEN		0x20000		/* 128b ( 1 flash sector )   */
+#define CONFIG_ENV_IS_IN_FLASH	1
+#define CONFIG_ENV_ADDR		0x10020000	/* absolute address for now  */
+#define CONFIG_ENV_SIZE		0x20000
 
 #define	 CONFIG_ENV_OVERWRITE	1		/* env is not writable now   */
 
 /* Setup CS4 and CS5 */
-#define CFG_GIUS_A_VAL		0x0003fffe
+#define CONFIG_SYS_GIUS_A_VAL		0x0003fffe
 
 /*
  * CSxU_VAL:
@@ -226,14 +226,14 @@
  *   |	 OEA   |   OEN	 |   WEA   |   WEN   |	 CSA   |EBC| DSZ  | 0|SP|0|WP| 0 0|PA|CSEN|
  */
 
-#define CFG_CS0U_VAL 0x00008C00
-#define CFG_CS0L_VAL 0x22222601
-#define CFG_CS1U_VAL 0x00008C00
-#define CFG_CS1L_VAL 0x22222301
-#define CFG_CS4U_VAL 0x00008C00
-#define CFG_CS4L_VAL 0x22222301
-#define CFG_CS5U_VAL 0x00008C00
-#define CFG_CS5L_VAL 0x22222301
+#define CONFIG_SYS_CS0U_VAL 0x00008C00
+#define CONFIG_SYS_CS0L_VAL 0x22222601
+#define CONFIG_SYS_CS1U_VAL 0x00008C00
+#define CONFIG_SYS_CS1L_VAL 0x22222301
+#define CONFIG_SYS_CS4U_VAL 0x00008C00
+#define CONFIG_SYS_CS4L_VAL 0x22222301
+#define CONFIG_SYS_CS5U_VAL 0x00008C00
+#define CONFIG_SYS_CS5L_VAL 0x22222301
 
 /* f_{dpll}=2*f{ref}*(MFI+MFN/(MFD+1))/(PD+1)
    f_ref=16,777MHz
@@ -252,25 +252,25 @@
    31 |x x x x|x x x x|x x x x|x x x x|x x x x|x x x x|x x x x|x x x x| 0
       |XXX|--PD---|-------MFD---------|XXX|--MFI--|-----MFN-----------|	    */
 
-#define CFG_MPCTL0_VAL		0x07E723AD
-#define CFG_MPCTL1_VAL		0x00000040
-#define CFG_PCDR_VAL		0x00010005
-#define CFG_GPCR_VAL		0x00000FFB
+#define CONFIG_SYS_MPCTL0_VAL		0x07E723AD
+#define CONFIG_SYS_MPCTL1_VAL		0x00000040
+#define CONFIG_SYS_PCDR_VAL		0x00010005
+#define CONFIG_SYS_GPCR_VAL		0x00000FFB
 
 #define USE_16M_OSZI /* If you have one, you want to use it
 			The internal 32kHz oszillator jitters */
 #ifdef USE_16M_OSZI
 
-#define CFG_SPCTL0_VAL		0x04001401
-#define CFG_SPCTL1_VAL		0x0C000040
-#define CFG_CSCR_VAL		0x07030003
+#define CONFIG_SYS_SPCTL0_VAL		0x04001401
+#define CONFIG_SYS_SPCTL1_VAL		0x0C000040
+#define CONFIG_SYS_CSCR_VAL		0x07030003
 #define CONFIG_SYS_CLK_FREQ	16780000
 #define CONFIG_SYSPLL_CLK_FREQ	16000000
 
 #else
 
-#define CFG_SPCTL0_VAL		0x07E716D1
-#define CFG_CSCR_VAL		0x06000003
+#define CONFIG_SYS_SPCTL0_VAL		0x07E716D1
+#define CONFIG_SYS_CSCR_VAL		0x06000003
 #define CONFIG_SYS_CLK_FREQ	16780000
 #define CONFIG_SYSPLL_CLK_FREQ	16780000
 
@@ -281,9 +281,9 @@
  * one may expect. For instance loadb command do not cares :-)
  * So advice is - do not relay on this...
  */
-#define CFG_LOAD_ADDR		0x08400000
+#define CONFIG_SYS_LOAD_ADDR		0x08400000
 
-#define CFG_FMCR_VAL		0x00000003 /* Reset Default */
+#define CONFIG_SYS_FMCR_VAL		0x00000003 /* Reset Default */
 
 /* Bit[0:3] contain PERCLK1DIV for UART 1
    0x000b00b ->b<- -> 192MHz/12=16MHz
@@ -296,15 +296,15 @@
 #define CONFIG_IMX_SERIAL2
 #elif defined _CONFIG_UART3 | defined _CONFIG_UART4
 #define CONFIG_IMX_SERIAL_NONE
-#define CFG_NS16550
-#define CFG_NS16550_SERIAL
-#define CFG_NS16550_CLK		3686400
-#define CFG_NS16550_REG_SIZE	1
+#define CONFIG_SYS_NS16550
+#define CONFIG_SYS_NS16550_SERIAL
+#define CONFIG_SYS_NS16550_CLK		3686400
+#define CONFIG_SYS_NS16550_REG_SIZE	1
 #define CONFIG_CONS_INDEX	1
 #ifdef _CONFIG_UART3
-#define CFG_NS16550_COM1	0x15000000
+#define CONFIG_SYS_NS16550_COM1	0x15000000
 #elif defined _CONFIG_UART4
-#define CFG_NS16550_COM1	0x16000000
+#define CONFIG_SYS_NS16550_COM1	0x16000000
 #endif
 #endif
 
diff --git a/include/configs/mx31ads.h b/include/configs/mx31ads.h
index 9ede7645d..1649f1fa8 100644
--- a/include/configs/mx31ads.h
+++ b/include/configs/mx31ads.h
@@ -50,15 +50,15 @@
 /*
  * Size of malloc() pool
  */
-#define CFG_MALLOC_LEN		(CFG_ENV_SIZE + 128 * 1024)
-#define CFG_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
+#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + 128 * 1024)
+#define CONFIG_SYS_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
 
 /*
  * Hardware drivers
  */
 
 #define CONFIG_MX31_UART	1
-#define CFG_MX31_UART1		1
+#define CONFIG_SYS_MX31_UART1		1
 
 #define CONFIG_HARD_SPI		1
 #define CONFIG_MXC_SPI		1
@@ -66,12 +66,15 @@
 #define CONFIG_DEFAULT_SPI_MODE	(SPI_MODE_2 | SPI_CS_HIGH)
 
 #define CONFIG_RTC_MC13783	1
+/* MC13783 connected to CSPI2 and SS0 */
+#define CONFIG_MC13783_SPI_BUS	1
+#define CONFIG_MC13783_SPI_CS	0
 
 /* allow to overwrite serial and ethaddr */
 #define CONFIG_ENV_OVERWRITE
 #define CONFIG_CONS_INDEX	1
 #define CONFIG_BAUDRATE		115200
-#define CFG_BAUDRATE_TABLE	{9600, 19200, 38400, 57600, 115200}
+#define CONFIG_SYS_BAUDRATE_TABLE	{9600, 19200, 38400, 57600, 115200}
 
 /***********************************************************
  * Command definition
@@ -125,22 +128,20 @@
 /*
  * Miscellaneous configurable options
  */
-#define CFG_LONGHELP		/* undef to save memory */
-#define CFG_PROMPT		"=> "
-#define CFG_CBSIZE		256		/* Console I/O Buffer Size */
+#define CONFIG_SYS_LONGHELP		/* undef to save memory */
+#define CONFIG_SYS_PROMPT		"=> "
+#define CONFIG_SYS_CBSIZE		256		/* Console I/O Buffer Size */
 /* Print Buffer Size */
-#define CFG_PBSIZE		(CFG_CBSIZE + sizeof(CFG_PROMPT) + 16)
-#define CFG_MAXARGS		16		/* max number of command args */
-#define CFG_BARGSIZE		CFG_CBSIZE	/* Boot Argument Buffer Size */
+#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
+#define CONFIG_SYS_MAXARGS		16		/* max number of command args */
+#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size */
 
-#define CFG_MEMTEST_START	0		/* memtest works on */
-#define CFG_MEMTEST_END		0x10000
+#define CONFIG_SYS_MEMTEST_START	0		/* memtest works on */
+#define CONFIG_SYS_MEMTEST_END		0x10000
 
-#undef	CFG_CLKS_IN_HZ		/* everything, incl board info, in Hz */
+#define CONFIG_SYS_LOAD_ADDR		CONFIG_LOADADDR
 
-#define CFG_LOAD_ADDR		CONFIG_LOADADDR
-
-#define CFG_HZ			CONFIG_MX31_CLK32 /* use 32kHz clock as source */
+#define CONFIG_SYS_HZ			1000
 
 #define CONFIG_CMDLINE_EDITING	1
 
@@ -161,34 +162,34 @@
 /*-----------------------------------------------------------------------
  * FLASH and environment organization
  */
-#define CFG_FLASH_BASE		CS0_BASE
-#define CFG_MAX_FLASH_BANKS	1		/* max number of memory banks */
-#define CFG_MAX_FLASH_SECT	262		/* max number of sectors on one chip */
-#define CFG_MONITOR_BASE	CFG_FLASH_BASE	/* Monitor at beginning of flash */
-#define CFG_MONITOR_LEN		(256 * 1024)	/* Reserve 256KiB */
+#define CONFIG_SYS_FLASH_BASE		CS0_BASE
+#define CONFIG_SYS_MAX_FLASH_BANKS	1		/* max number of memory banks */
+#define CONFIG_SYS_MAX_FLASH_SECT	262		/* max number of sectors on one chip */
+#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_FLASH_BASE	/* Monitor at beginning of flash */
+#define CONFIG_SYS_MONITOR_LEN		(256 * 1024)	/* Reserve 256KiB */
 
-#define	CFG_ENV_IS_IN_FLASH	1
-#define CFG_ENV_SECT_SIZE	(32 * 1024)
-#define CFG_ENV_SIZE		CFG_ENV_SECT_SIZE
+#define	CONFIG_ENV_IS_IN_FLASH	1
+#define CONFIG_ENV_SECT_SIZE	(32 * 1024)
+#define CONFIG_ENV_SIZE		CONFIG_ENV_SECT_SIZE
 
 /* Address and size of Redundant Environment Sector	*/
-#define CFG_ENV_OFFSET_REDUND	(CFG_ENV_OFFSET + CFG_ENV_SIZE)
-#define CFG_ENV_SIZE_REDUND	CFG_ENV_SIZE
+#define CONFIG_ENV_OFFSET_REDUND	(CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)
+#define CONFIG_ENV_SIZE_REDUND	CONFIG_ENV_SIZE
 
 /* S29WS256N NOR flash has 4 32KiB small sectors at the beginning and at the end.
  * The rest of 32MiB is in 128KiB big sectors. U-Boot occupies the low 4 sectors,
  * if we put environment next to it, we will have to occupy 128KiB for it.
  * Putting it at the top of flash we use only 32KiB. */
-#define CFG_ENV_ADDR		(CFG_MONITOR_BASE + CFG_ENV_SECT_SIZE)
+#define CONFIG_ENV_ADDR		(CONFIG_SYS_MONITOR_BASE + CONFIG_ENV_SECT_SIZE)
 
 /*-----------------------------------------------------------------------
  * CFI FLASH driver setup
  */
-#define CFG_FLASH_CFI			1 /* Flash memory is CFI compliant */
+#define CONFIG_SYS_FLASH_CFI			1 /* Flash memory is CFI compliant */
 #define CONFIG_FLASH_CFI_DRIVER		1 /* Use drivers/cfi_flash.c */
 #define CONFIG_FLASH_SPANSION_S29WS_N	1 /* A non-standard buffered write algorithm */
-#define CFG_FLASH_USE_BUFFER_WRITE	1 /* Use buffered writes (~10x faster) */
-#define CFG_FLASH_PROTECTION		1 /* Use hardware sector protection */
+#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE	1 /* Use buffered writes (~10x faster) */
+#define CONFIG_SYS_FLASH_PROTECTION		1 /* Use hardware sector protection */
 
 /*
  * JFFS2 partitions
diff --git a/include/configs/neo.h b/include/configs/neo.h
new file mode 100644
index 000000000..f275c7b2a
--- /dev/null
+++ b/include/configs/neo.h
@@ -0,0 +1,231 @@
+/*
+ * (C) Copyright 2007-2008
+ * Dirk Eibach,  Guntermann & Drunck GmbH, eibach@gdsys.de
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+
+#define CONFIG_405EP		1	/* this is a PPC405 CPU */
+#define CONFIG_4xx		1	/*  member of PPC4xx family */
+#define CONFIG_NEO	        1	/*  on a Neo board */
+
+/*
+ * Include common defines/options for all AMCC eval boards
+ */
+#define CONFIG_HOSTNAME		neo
+#include "amcc-common.h"
+
+#define CONFIG_BOARD_EARLY_INIT_F 	/* call board_early_init_f */
+
+#define CONFIG_SYS_CLK_FREQ	33333333 /* external frequency to pll   */
+
+/*
+ * Configure PLL
+ */
+#define PLLMR0_DEFAULT PLLMR0_266_133_66_33
+#define PLLMR1_DEFAULT PLLMR1_266_133_66_33
+
+/* new uImage format support */
+#define CONFIG_FIT
+#define CONFIG_FIT_VERBOSE	/* enable fit_format_{error,warning}() */
+
+#define CONFIG_ENV_IS_IN_FLASH	/* use FLASH for environment vars */
+
+/*
+ * Default environment variables
+ */
+#define	CONFIG_EXTRA_ENV_SETTINGS					\
+	CONFIG_AMCC_DEF_ENV						\
+	CONFIG_AMCC_DEF_ENV_POWERPC					\
+	CONFIG_AMCC_DEF_ENV_NOR_UPD					\
+	"kernel_addr=fc000000\0"					\
+	"fdt_addr=fc1e0000\0"						\
+	"ramdisk_addr=fc200000\0"					\
+	""
+
+#define CONFIG_PHY_ADDR		4	/* PHY address			*/
+#define CONFIG_HAS_ETH0
+#define CONFIG_HAS_ETH1
+#define CONFIG_PHY1_ADDR	0xc	/* EMAC1 PHY address		*/
+#define CONFIG_PHY_CLK_FREQ    EMAC_STACR_CLK_66MHZ
+
+/*
+ * Commands additional to the ones defined in amcc-common.h
+ */
+#define CONFIG_CMD_CACHE
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_DTT
+#undef CONFIG_CMD_EEPROM
+
+/*
+ * SDRAM configuration (please see cpu/ppc/sdram.[ch])
+ */
+#define CONFIG_SDRAM_BANK0	1	/* init onboard SDRAM bank 0 */
+
+/* SDRAM timings used in datasheet */
+#define CONFIG_SYS_SDRAM_CL            3	/* CAS latency */
+#define CONFIG_SYS_SDRAM_tRP           20	/* PRECHARGE command period */
+#define CONFIG_SYS_SDRAM_tRC           66	/* ACTIVE-to-ACTIVE command period */
+#define CONFIG_SYS_SDRAM_tRCD          20	/* ACTIVE-to-READ delay */
+#define CONFIG_SYS_SDRAM_tRFC		66	/* Auto refresh period */
+
+/*
+ * If CONFIG_SYS_EXT_SERIAL_CLOCK, then the UART divisor is 1.
+ * If CONFIG_SYS_405_UART_ERRATA_59, then UART divisor is 31.
+ * Otherwise, UART divisor is determined by CPU Clock and CONFIG_SYS_BASE_BAUD value.
+ * The Linux BASE_BAUD define should match this configuration.
+ *    baseBaud = cpuClock/(uartDivisor*16)
+ * If CONFIG_SYS_405_UART_ERRATA_59 and 200MHz CPU clock,
+ * set Linux BASE_BAUD to 403200.
+ */
+#undef	CONFIG_SERIAL_SOFTWARE_FIFO
+#undef  CONFIG_SYS_EXT_SERIAL_CLOCK           /* external serial clock */
+#undef  CONFIG_SYS_405_UART_ERRATA_59         /* 405GP/CR Rev. D silicon */
+#define CONFIG_SYS_BASE_BAUD		691200
+
+/*
+ * I2C stuff
+ */
+#define CONFIG_SYS_I2C_SPEED		100000	/* I2C speed and slave address	*/
+
+/* RTC */
+#define CONFIG_RTC_DS1337
+#define CONFIG_SYS_I2C_RTC_ADDR	0x68
+
+/* Temp sensor/hwmon/dtt */
+#define CONFIG_DTT_LM63		1	/* National LM63	*/
+#define CONFIG_DTT_SENSORS	{ 0 }	/* Sensor addresses	*/
+#define CONFIG_DTT_PWM_LOOKUPTABLE	\
+		{ { 40, 10 }, { 50, 20 }, { 60, 40 } }
+#define CONFIG_DTT_TACH_LIMIT	0xa10
+
+/*
+ * FLASH organization
+ */
+#define CONFIG_SYS_FLASH_CFI				/* The flash is CFI compatible	*/
+#define CONFIG_FLASH_CFI_DRIVER			/* Use common CFI driver	*/
+
+#define CONFIG_SYS_FLASH_BASE		0xFC000000
+#define CONFIG_SYS_FLASH_BANKS_LIST	{ CONFIG_SYS_FLASH_BASE }
+
+#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
+#define CONFIG_SYS_MAX_FLASH_SECT	512	/* max number of sectors on one chip	*/
+
+#define CONFIG_SYS_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
+#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
+
+#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1	/* use buffered writes (20x faster)	*/
+#define CONFIG_SYS_FLASH_PROTECTION	1	/* use hardware flash protection	*/
+
+#define CONFIG_SYS_FLASH_EMPTY_INFO		/* print 'E' for empty sector on flinfo */
+#define CONFIG_SYS_FLASH_QUIET_TEST	1	/* don't warn upon unknown flash	*/
+
+#ifdef CONFIG_ENV_IS_IN_FLASH
+#define CONFIG_ENV_SECT_SIZE	0x20000	/* size of one complete sector		*/
+#define CONFIG_ENV_ADDR		((-CONFIG_SYS_MONITOR_LEN)-CONFIG_ENV_SECT_SIZE)
+#define	CONFIG_ENV_SIZE		0x2000	/* Total Size of Environment Sector	*/
+
+/* Address and size of Redundant Environment Sector	*/
+#define CONFIG_ENV_ADDR_REDUND	(CONFIG_ENV_ADDR-CONFIG_ENV_SECT_SIZE)
+#define CONFIG_ENV_SIZE_REDUND	(CONFIG_ENV_SIZE)
+#endif
+
+/*
+ * PPC405 GPIO Configuration
+ */
+#define CONFIG_SYS_4xx_GPIO_TABLE { /*				GPIO	Alternate1	*/	\
+{											\
+/* GPIO Core 0 */									\
+{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO0	PerBLast    	*/	\
+{ GPIO_BASE, GPIO_OUT, GPIO_SEL,  GPIO_OUT_NO_CHG }, /* GPIO1	TS1E		*/	\
+{ GPIO_BASE, GPIO_OUT, GPIO_SEL,  GPIO_OUT_NO_CHG }, /* GPIO2	TS2E		*/	\
+{ GPIO_BASE, GPIO_IN,  GPIO_SEL,  GPIO_OUT_NO_CHG }, /* GPIO3	TS1O		*/	\
+{ GPIO_BASE, GPIO_OUT, GPIO_SEL,  GPIO_OUT_NO_CHG }, /* GPIO4	TS2O		*/	\
+{ GPIO_BASE, GPIO_OUT, GPIO_SEL,  GPIO_OUT_NO_CHG }, /* GPIO5	TS3		*/	\
+{ GPIO_BASE, GPIO_OUT, GPIO_SEL,  GPIO_OUT_NO_CHG }, /* GPIO6	TS4		*/	\
+{ GPIO_BASE, GPIO_OUT, GPIO_SEL,  GPIO_OUT_NO_CHG }, /* GPIO7	TS5		*/	\
+{ GPIO_BASE, GPIO_OUT, GPIO_SEL,  GPIO_OUT_NO_CHG }, /* GPIO8	TS6		*/	\
+{ GPIO_BASE, GPIO_OUT, GPIO_SEL,  GPIO_OUT_NO_CHG }, /* GPIO9	TrcClk		*/	\
+{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO10	PerCS1		*/	\
+{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO11	PerCS2		*/	\
+{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO12	PerCS3		*/	\
+{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO13	PerCS4		*/	\
+{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO14	PerAddr03   	*/	\
+{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO15	PerAddr04   	*/	\
+{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO16	PerAddr05   	*/	\
+{ GPIO_BASE, GPIO_IN,  GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO17	IRQ0	    	*/	\
+{ GPIO_BASE, GPIO_IN,  GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO18	IRQ1	    	*/	\
+{ GPIO_BASE, GPIO_IN,  GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO19	IRQ2	    	*/	\
+{ GPIO_BASE, GPIO_IN,  GPIO_SEL,  GPIO_OUT_NO_CHG }, /* GPIO20	IRQ3	    	*/	\
+{ GPIO_BASE, GPIO_OUT, GPIO_SEL,  GPIO_OUT_NO_CHG }, /* GPIO21	IRQ4	    	*/	\
+{ GPIO_BASE, GPIO_OUT, GPIO_SEL,  GPIO_OUT_NO_CHG }, /* GPIO22	IRQ5	    	*/	\
+{ GPIO_BASE, GPIO_IN,  GPIO_SEL,  GPIO_OUT_NO_CHG }, /* GPIO23	IRQ6	    	*/	\
+{ GPIO_BASE, GPIO_IN,  GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO24	UART0_DCD   	*/	\
+{ GPIO_BASE, GPIO_IN,  GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO25	UART0_DSR	*/	\
+{ GPIO_BASE, GPIO_IN,  GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO26	UART0_RI	*/	\
+{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO27	UART0_DTR	*/	\
+{ GPIO_BASE, GPIO_IN,  GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO28	UART1_Rx    	*/	\
+{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO29	UART1_Tx	*/	\
+{ GPIO_BASE, GPIO_OUT, GPIO_SEL,  GPIO_OUT_NO_CHG }, /* GPIO30	RejectPkt0  	*/	\
+{ GPIO_BASE, GPIO_IN,  GPIO_SEL,  GPIO_OUT_NO_CHG }, /* GPIO31	RejectPkt1  	*/	\
+}											\
+}
+
+/*
+ * Definitions for initial stack pointer and data area (in data cache)
+ */
+/* use on chip memory (OCM) for temperary stack until sdram is tested */
+#define CONFIG_SYS_TEMP_STACK_OCM        1
+
+/* On Chip Memory location */
+#define CONFIG_SYS_OCM_DATA_ADDR	0xF8000000
+#define CONFIG_SYS_OCM_DATA_SIZE	0x1000
+#define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_OCM_DATA_ADDR /* inside of SDRAM		*/
+#define CONFIG_SYS_INIT_RAM_END	CONFIG_SYS_OCM_DATA_SIZE /* End of used area in RAM	*/
+
+#define CONFIG_SYS_GBL_DATA_SIZE	128  /* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
+
+/*
+ * External Bus Controller (EBC) Setup
+ */
+
+/* Memory Bank 0 (NOR-FLASH) initialization                    */
+#define CONFIG_SYS_EBC_PB0AP		0x92015480
+#define CONFIG_SYS_EBC_PB0CR		0xFC0DA000  /* BAS=0xFC0,BS=64MB,BU=R/W,BW=16bit */
+
+/* Memory Bank 1 (NVRAM) initialization                                        */
+#define CONFIG_SYS_EBC_PB1AP		0x92015480
+#define CONFIG_SYS_EBC_PB1CR		0xFB85A000  /* BAS=0xFF8,BS=4MB,BU=R/W,BW=8bit  */
+
+/* Memory Bank 2 (FPGA) initialization                 */
+#define CONFIG_FPGA_BASE	0x7f100000
+#define CONFIG_SYS_EBC_PB2AP		0x92015480
+#define CONFIG_SYS_EBC_PB2CR		0x7f11a000  /* BAS=0x7f1,BS=1MB,BU=R/W,BW=16bit */
+
+/* Memory Bank 3 (Latches) initialization                      */
+#define CONFIG_SYS_EBC_PB3AP		0x92015480
+#define CONFIG_SYS_EBC_PB3CR		0x7f21a000  /* BAS=0x7f2,BS=1MB,BU=R/W,BW=16bit */
+
+#endif	/* __CONFIG_H */
diff --git a/include/configs/netstal-common.h b/include/configs/netstal-common.h
new file mode 100644
index 000000000..4d5c1ab34
--- /dev/null
+++ b/include/configs/netstal-common.h
@@ -0,0 +1,255 @@
+/*
+ * (C) Copyright 2008
+ * Niklaus Giger, Netstal Maschinen AG, niklaus.giger@netstal.com
+ * adapted from amcc-common.h by
+ * (C) Copyright 2008
+ *  * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * Common configuration options for all Netstal boards
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __NETSTAL_COMMON_H
+#define __NETSTAL_COMMON_H
+
+#define CONFIG_SYS_SDRAM_BASE		0x00000000	/* _must_ be 0		*/
+#define CONFIG_SYS_MONITOR_BASE	TEXT_BASE	/* Start of U-Boot	*/
+#define CONFIG_SYS_MONITOR_LEN		(320 * 1024)	/* Reserve 320 kB for Monitor	*/
+#define CONFIG_SYS_MALLOC_LEN		(256 * 1024)	/* Reserve 256 kB for malloc() */
+
+/*
+ * UART
+ */
+#define CONFIG_SERIAL_MULTI
+#define CONFIG_SYS_BAUDRATE_TABLE  \
+    {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400}
+
+/*
+ * I2C
+ */
+#define CONFIG_HARD_I2C		1	/* I2C with hardware support */
+#define CONFIG_SYS_I2C_SPEED		400000	/* I2C speed and slave address	*/
+#define CONFIG_SYS_I2C_SLAVE		0x7F
+
+/* This is the 7bit address of the device, not including P. */
+#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
+
+/* The EEPROM can do 16byte ( 1 << 4 ) page writes. */
+#define CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW	0x07
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 4
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_ENABLE
+
+/*
+ * Ethernet/EMAC/PHY
+ */
+#define CONFIG_PPC4xx_EMAC
+#define CONFIG_MII			/* MII PHY management		*/
+#define CONFIG_PHY_ADDR		1	/* PHY address			*/
+#if defined(CONFIG_440)
+#define CONFIG_NET_MULTI	1
+#define CONFIG_NETCONSOLE		/* include NetConsole support	*/
+#define CONFIG_SYS_RX_ETH_BUFFER	32	/* number of eth rx buffers	*/
+#else
+#define CONFIG_SYS_RX_ETH_BUFFER	16	/* number of eth rx buffers	*/
+#endif
+#define CONFIG_HAS_ETH0
+
+/*
+ * Commands
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_ASKENV
+#if defined(CONFIG_440)
+#define CONFIG_CMD_CACHE
+#endif
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_DIAG
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_IRQ
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_NFS
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_REGINFO
+#define CONFIG_BOOT_RETRY_TIME 30
+#define CONFIG_RESET_TO_RETRY
+/*
+ * Miscellaneous configurable options
+ */
+#define CONFIG_BOOTDELAY	1	/* autoboot after 1 second	*/
+#define CONFIG_SYS_LONGHELP			/* undef to save memory		*/
+#define CONFIG_SYS_PROMPT		"=> "	/* Monitor Command Prompt	*/
+#if defined(CONFIG_CMD_KGDB)
+#define CONFIG_SYS_CBSIZE		1024	/* Console I/O Buffer Size	*/
+#else
+#define CONFIG_SYS_CBSIZE		256	/* Console I/O Buffer Size	*/
+#endif
+#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
+#define CONFIG_SYS_MAXARGS		16	/* max number of command args	*/
+#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size	*/
+
+#define CONFIG_SYS_MEMTEST_START	0x0400000 /* memtest works on		*/
+#define CONFIG_SYS_MEMTEST_END		0x0C00000 /* 4 ... 12 MB in DRAM	*/
+
+#define CONFIG_SYS_LOAD_ADDR		0x100000  /* default load address	*/
+#define CONFIG_SYS_EXTBDINFO			/* To use extended board_into (bd_t) */
+
+#define CONFIG_SYS_HZ			1000	/* decrementer freq: 1 ms ticks	*/
+
+#define CONFIG_CMDLINE_EDITING		/* add command line history	*/
+#define CONFIG_AUTO_COMPLETE		/* add autocompletion support	*/
+#define CONFIG_LOOPW			/* enable loopw command         */
+#define CONFIG_MX_CYCLIC		/* enable mdc/mwc commands      */
+#define CONFIG_ZERO_BOOTDELAY_CHECK	/* check for keypress on bootdelay==0 */
+#define CONFIG_VERSION_VARIABLE 	/* include version env variable */
+#define CONFIG_SYS_CONSOLE_INFO_QUIET		/* don't print console @ startup*/
+
+#define CONFIG_SYS_HUSH_PARSER			/* Use the HUSH parser		*/
+#ifdef	CONFIG_SYS_HUSH_PARSER
+#define	CONFIG_SYS_PROMPT_HUSH_PS2	"> "
+#endif
+
+#define CONFIG_LOADS_ECHO		/* echo on for serial download	*/
+#define CONFIG_SYS_LOADS_BAUD_CHANGE		/* allow baudrate change	*/
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+#define CONFIG_BOOTP_SUBNETMASK
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CONFIG_SYS_BOOTMAPSZ		(8 << 20) /* Initial Memory map for Linux */
+
+/*
+ * Internal Definitions
+ */
+#if defined(CONFIG_CMD_KGDB)
+#define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port*/
+#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use	*/
+#endif
+
+/*
+ * Pass open firmware flat tree
+ */
+#define CONFIG_OF_LIBFDT
+#define CONFIG_OF_BOARD_SETUP
+
+/*
+ * Booting and default environment
+ */
+#define CONFIG_PREBOOT	"echo;"	\
+	"echo Type \"run net_nfs\" to mount root filesystem over NFS;" \
+	"echo"
+#define CONFIG_BOOTCOMMAND	"run vx"
+
+/*
+ * Only very few boards have default console not on ttyS0 (like Taishan)
+ */
+#if !defined(CONFIG_USE_TTY)
+#define CONFIG_USE_TTY	ttyS0
+#endif
+
+/*
+ * Only some 4xx PPC's are equipped with an FPU
+ */
+#if defined(CONFIG_440EP) || defined(CONFIG_440EPX) || \
+    defined(CONFIG_460EX) || defined(CONFIG_460GT)
+#define CONFIG_NETSTAL_DEF_ENV_ROOTPATH	"rootpath=/opt/eldk/ppc_4xxFP\0"
+#else
+#define CONFIG_NETSTAL_DEF_ENV_ROOTPATH	"rootpath=/opt/eldk/ppc_4xx\0"
+#endif
+
+/*
+ * Only some boards need to extend the bootargs by some additional
+ * parameters (like Makalu)
+ */
+#if !defined(CONFIG_ADDMISC)
+#define CONFIG_ADDMISC	"addmisc=setenv bootargs ${bootargs}\0"
+#endif
+
+#define xstr(s)	str(s)
+#define str(s)	#s
+
+/* Setup some values for the default environment variables */
+#define CONFIG_SERVERIP		172.25.1.1
+#define CONFIG_ETHADDR      00:60:13:00:00:00   /* Netstal Machines AG MAC */
+#define CONFIG_OVERWRITE_ETHADDR_ONCE
+
+#define CONFIG_SYS_TFTP_LOADADDR	0x01000000
+#define CONFIG_SYS_VXWORKS_ADD_PARAMS	"u=dpu pw=netstal8752"
+#define CONFIG_SYS_VXWORKS_SERVERNAME	"c"
+/*
+ * General common environment variables shared by all boards produced by Netstal Maschinen
+ */
+#define CONFIG_NETSTAL_DEF_ENV						\
+	"netdev=eth0\0"							\
+	"nfsargs=setenv bootargs root=/dev/nfs rw "			\
+		"nfsroot=${serverip}:${rootpath}\0"			\
+	"ramargs=setenv bootargs root=/dev/ram rw\0"			\
+	"addip=setenv bootargs ${bootargs} "				\
+		"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"	\
+		":${hostname}:${netdev}:off panic=1\0"			\
+	"addtty=setenv bootargs ${bootargs}"				\
+		" console=" xstr(CONFIG_USE_TTY) ",${baudrate}\0"	\
+	CONFIG_ADDMISC							\
+	"initrd_high=30000000\0"					\
+	"kernel_addr_r=400000\0"					\
+	"fdt_addr_r=800000\0"						\
+	"hostname=" xstr(CONFIG_HOSTNAME) "\0"				\
+	"bootfile=" xstr(CONFIG_HOSTNAME) "/uImage\0"			\
+	"uload=tftp " xstr(CONFIG_SYS_TFTP_LOADADDR) " "		\
+		xstr(CONFIG_HOSTNAME) "/u-boot.bin\0"			\
+	"vx_rom=" xstr(CONFIG_HOSTNAME) "/"				\
+		xstr(CONFIG_HOSTNAME) "_vx_rom\0"			\
+	"update=protect off " xstr(CONFIG_SYS_MONITOR_BASE) " FFFFFFFF;"\
+		"era " xstr(CONFIG_SYS_MONITOR_BASE) " FFFFFFFF;"	\
+		"cp.b ${fileaddr} "xstr(CONFIG_SYS_MONITOR_BASE) 	\
+		" ${filesize}; setenv filesize\0"			\
+	"upd=run uload update\0"					\
+	"vx=setenv bootfile ${vx_rom}; tftp " 				\
+		xstr(CONFIG_SYS_TFTP_LOADADDR) "; bootvx\0"		\
+	CONFIG_NETSTAL_DEF_ENV_ROOTPATH
+
+/*
+ * Default environment for arch/powerpc booting
+ * for boards that are ported to arch/powerpc
+ */
+#define CONFIG_NETSTAL_DEF_ENV_POWERPC					\
+	"flash_self=run ramargs addip addtty addmisc;"			\
+		"bootm ${kernel_addr} ${ramdisk_addr} ${fdt_addr}\0"	\
+	"flash_nfs=run nfsargs addip addtty addmisc;"			\
+		"bootm ${kernel_addr} - ${fdt_addr}\0"			\
+	"net_nfs=tftp ${kernel_addr_r} ${bootfile}; "			\
+		"tftp ${fdt_addr_r} ${fdt_file}; "			\
+		"run nfsargs addip addtty addmisc;"			\
+		"bootm ${kernel_addr_r} - ${fdt_addr_r}\0"		\
+	"fdt_file=" xstr(CONFIG_HOSTNAME) "/" xstr(CONFIG_HOSTNAME) ".dtb\0"
+
+#endif /* __NETSTAL_COMMON_H */
diff --git a/include/configs/netstar.h b/include/configs/netstar.h
index 756b7c267..dda659784 100644
--- a/include/configs/netstar.h
+++ b/include/configs/netstar.h
@@ -49,7 +49,7 @@
 #define CONFIG_INITRD_TAG		1
 
 #define CONFIG_SILENT_CONSOLE		1	/* enable silent startup */
-#define CFG_CONSOLE_INFO_QUIET
+#define CONFIG_SYS_CONSOLE_INFO_QUIET
 
 /*
  * Physical Memory Map
@@ -62,32 +62,32 @@
 /*
  * FLASH organization
  */
-#define CFG_FLASH_BASE		PHYS_FLASH_1
-#define CFG_MAX_FLASH_BANKS	1
+#define CONFIG_SYS_FLASH_BASE		PHYS_FLASH_1
+#define CONFIG_SYS_MAX_FLASH_BANKS	1
 #define PHYS_FLASH_1_SIZE	(1 * 1024 * 1024)
-#define CFG_MAX_FLASH_SECT	19
-#define CFG_FLASH_ERASE_TOUT	(5*CFG_HZ) /* in ticks */
-#define CFG_FLASH_WRITE_TOUT	(5*CFG_HZ)
+#define CONFIG_SYS_MAX_FLASH_SECT	19
+#define CONFIG_SYS_FLASH_ERASE_TOUT	(5*CONFIG_SYS_HZ) /* in ticks */
+#define CONFIG_SYS_FLASH_WRITE_TOUT	(5*CONFIG_SYS_HZ)
 
-#define CFG_MONITOR_BASE	PHYS_FLASH_1
-#define CFG_MONITOR_LEN		(256 * 1024)
+#define CONFIG_SYS_MONITOR_BASE	PHYS_FLASH_1
+#define CONFIG_SYS_MONITOR_LEN		(256 * 1024)
 
 /*
  * Environment settings
  */
-#define CFG_ENV_IS_IN_FLASH
-#define CFG_ENV_ADDR		0x4000
-#define CFG_ENV_SIZE		(8 * 1024)
-#define CFG_ENV_SECT_SIZE	(8 * 1024)
-#define CFG_ENV_ADDR_REDUND	0x6000
-#define CFG_ENV_SIZE_REDUND	CFG_ENV_SIZE
+#define CONFIG_ENV_IS_IN_FLASH
+#define CONFIG_ENV_ADDR		0x4000
+#define CONFIG_ENV_SIZE		(8 * 1024)
+#define CONFIG_ENV_SECT_SIZE	(8 * 1024)
+#define CONFIG_ENV_ADDR_REDUND	0x6000
+#define CONFIG_ENV_SIZE_REDUND	CONFIG_ENV_SIZE
 #define CONFIG_ENV_OVERWRITE
 
 /*
  * Size of malloc() pool
  */
-#define CFG_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
-#define CFG_MALLOC_LEN		(4 * 1024 * 1024)
+#define CONFIG_SYS_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
+#define CONFIG_SYS_MALLOC_LEN		(4 * 1024 * 1024)
 
 /*
  * The stack size is set up in start.S using the settings below
@@ -103,15 +103,15 @@
 /*
  * NS16550 Configuration
  */
-#define CFG_NS16550
-#define CFG_NS16550_SERIAL
-#define CFG_NS16550_REG_SIZE	(-4)
-#define CFG_NS16550_CLK		(CONFIG_XTAL_FREQ)	/* can be 12M/32Khz or 48Mhz  */
-#define CFG_NS16550_COM1	OMAP1510_UART1_BASE	/* uart1 */
+#define CONFIG_SYS_NS16550
+#define CONFIG_SYS_NS16550_SERIAL
+#define CONFIG_SYS_NS16550_REG_SIZE	(-4)
+#define CONFIG_SYS_NS16550_CLK		(CONFIG_XTAL_FREQ)	/* can be 12M/32Khz or 48Mhz  */
+#define CONFIG_SYS_NS16550_COM1	OMAP1510_UART1_BASE	/* uart1 */
 
 #define CONFIG_CONS_INDEX	1
 #define CONFIG_BAUDRATE		115200
-#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
 
 /*#define CONFIG_SKIP_RELOCATE_UBOOT*/
 /*#define CONFIG_SKIP_LOWLEVEL_INIT */
@@ -119,9 +119,9 @@
 /*
  * NAND flash
  */
-#define CFG_MAX_NAND_DEVICE	1
+#define CONFIG_SYS_MAX_NAND_DEVICE	1
 #define NAND_MAX_CHIPS		1
-#define CFG_NAND_BASE	0x04000000 + (2 << 23)
+#define CONFIG_SYS_NAND_BASE	0x04000000 + (2 << 23)
 #define NAND_ALLOW_ERASE_ALL	1
 
 /*
@@ -168,7 +168,7 @@
 #define CONFIG_BOOTDELAY	3
 #define CONFIG_ZERO_BOOTDELAY_CHECK	/* allow to break in always */
 #undef  CONFIG_BOOTARGS		/* the boot command will set bootargs*/
-#define CFG_AUTOLOAD		"n"		/* No autoload */
+#define CONFIG_SYS_AUTOLOAD		"n"		/* No autoload */
 #define CONFIG_BOOTCOMMAND	"run fboot"
 #define CONFIG_PREBOOT		"run setup"
 #define	CONFIG_EXTRA_ENV_SETTINGS						\
@@ -203,31 +203,31 @@
 /*
  * Miscellaneous configurable options
  */
-#define CFG_LONGHELP				/* undef to save memory		*/
-#define CFG_PROMPT		"# "		/* Monitor Command Prompt	*/
-#define CFG_CBSIZE		256		/* Console I/O Buffer Size	*/
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define CFG_MAXARGS		16		/* max number of command args	*/
-#define CFG_BARGSIZE		CFG_CBSIZE	/* Boot Argument Buffer Size	*/
-
-#define CFG_HUSH_PARSER
-#define CFG_PROMPT_HUSH_PS2	"> "
+#define CONFIG_SYS_LONGHELP				/* undef to save memory		*/
+#define CONFIG_SYS_PROMPT		"# "		/* Monitor Command Prompt	*/
+#define CONFIG_SYS_CBSIZE		256		/* Console I/O Buffer Size	*/
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS		16		/* max number of command args	*/
+#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
+
+#define CONFIG_SYS_HUSH_PARSER
+#define CONFIG_SYS_PROMPT_HUSH_PS2	"> "
 #define CONFIG_AUTO_COMPLETE
 
-#define CFG_MEMTEST_START	PHYS_SDRAM_1
-#define CFG_MEMTEST_END		PHYS_SDRAM_1 + PHYS_SDRAM_1_SIZE - \
-				(CFG_MONITOR_LEN + CFG_MALLOC_LEN + CONFIG_STACKSIZE)
+#define CONFIG_SYS_MEMTEST_START	PHYS_SDRAM_1
+#define CONFIG_SYS_MEMTEST_END		PHYS_SDRAM_1 + PHYS_SDRAM_1_SIZE - \
+				(CONFIG_SYS_MONITOR_LEN + CONFIG_SYS_MALLOC_LEN + CONFIG_STACKSIZE)
 
-#undef	CFG_CLKS_IN_HZ		/* everything, incl board info, in Hz */
+#undef	CONFIG_SYS_CLKS_IN_HZ		/* everything, incl board info, in Hz */
 
-#define CFG_LOAD_ADDR		PHYS_SDRAM_1 + 0x400000	/* default load address */
+#define CONFIG_SYS_LOAD_ADDR		PHYS_SDRAM_1 + 0x400000	/* default load address */
 
 /* The 1510 has 3 timers, they can be driven by the RefClk (12Mhz) or by DPLL1.
  * This time is further subdivided by a local divisor.
  */
-#define CFG_TIMERBASE		OMAP1510_TIMER1_BASE
-#define CFG_PVT			7		/* 2^(pvt+1), divide by 256 */
-#define CFG_HZ			((CONFIG_SYS_CLK_FREQ)/(2 << CFG_PVT))
+#define CONFIG_SYS_TIMERBASE		OMAP1510_TIMER1_BASE
+#define CONFIG_SYS_PVT			7		/* 2^(pvt+1), divide by 256 */
+#define CONFIG_SYS_HZ			((CONFIG_SYS_CLK_FREQ)/(2 << CONFIG_SYS_PVT))
 
 #define OMAP5910_DPLL_DIV	1
 #define OMAP5910_DPLL_MUL	((CONFIG_SYS_CLK_FREQ * \
diff --git a/include/configs/ns9750dev.h b/include/configs/ns9750dev.h
index 746a56e9a..b22c33cc8 100644
--- a/include/configs/ns9750dev.h
+++ b/include/configs/ns9750dev.h
@@ -49,8 +49,8 @@
 /*
  * Size of malloc() pool
  */
-#define CFG_MALLOC_LEN		(CFG_ENV_SIZE + 128*1024)
-#define CFG_GBL_DATA_SIZE       128     /* size in bytes reserved for initial
+#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + 128*1024)
+#define CONFIG_SYS_GBL_DATA_SIZE       128     /* size in bytes reserved for initial
 					 * data */
 
 /*
@@ -112,24 +112,24 @@
 /*
  * Miscellaneous configurable options
  */
-#define	CFG_LONGHELP				/* undef to save memory		*/
-#define	CFG_PROMPT		"NS9750DEV # "	/* Monitor Command Prompt	*/
-#define	CFG_CBSIZE		256		/* Console I/O Buffer Size	*/
-#define	CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define	CFG_MAXARGS		16		/* max number of command args	*/
-#define CFG_BARGSIZE		CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+#define	CONFIG_SYS_LONGHELP				/* undef to save memory		*/
+#define	CONFIG_SYS_PROMPT		"NS9750DEV # "	/* Monitor Command Prompt	*/
+#define	CONFIG_SYS_CBSIZE		256		/* Console I/O Buffer Size	*/
+#define	CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define	CONFIG_SYS_MAXARGS		16		/* max number of command args	*/
+#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
 
-#define CFG_MEMTEST_START	0x00000000	/* memtest works on	*/
-#define CFG_MEMTEST_END		0x00780000	/* 7,5 MB in DRAM	*/ /* @TODO */
+#define CONFIG_SYS_MEMTEST_START	0x00000000	/* memtest works on	*/
+#define CONFIG_SYS_MEMTEST_END		0x00780000	/* 7,5 MB in DRAM	*/ /* @TODO */
 
-#undef  CFG_CLKS_IN_HZ		/* everything, incl board info, in Hz */
+#undef  CONFIG_SYS_CLKS_IN_HZ		/* everything, incl board info, in Hz */
 
-#define	CFG_LOAD_ADDR		0x00600000	/* default load address	*/ /* @TODO */
+#define	CONFIG_SYS_LOAD_ADDR		0x00600000	/* default load address	*/ /* @TODO */
 
-#define	CFG_HZ			(CPU_CLK_FREQ/64)
+#define	CONFIG_SYS_HZ			(CPU_CLK_FREQ/64)
 
 /* valid baudrates */
-#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
 
 #define NS9750_ETH_PHY_ADDRESS	(0x0000)
 
@@ -156,7 +156,7 @@
 
 #define PHYS_FLASH_1		0x50000000 /* Flash Bank #1 */
 
-#define CFG_FLASH_BASE		PHYS_FLASH_1
+#define CONFIG_SYS_FLASH_BASE		PHYS_FLASH_1
 
 /*-----------------------------------------------------------------------
  * FLASH and environment organization
@@ -168,26 +168,26 @@
 #define CONFIG_AMD_LV800	1	/* uncomment this if you have a LV800 flash */
 #endif
 
-#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks */
+#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks */
 #ifdef CONFIG_AMD_LV800
 #define PHYS_FLASH_SIZE		0x00100000 /* 1MB */
-#define CFG_MAX_FLASH_SECT	(19)	/* max number of sectors on one chip */
-#define CFG_ENV_ADDR		(CFG_FLASH_BASE + 0x0F0000) /* addr of environment */
+#define CONFIG_SYS_MAX_FLASH_SECT	(19)	/* max number of sectors on one chip */
+#define CONFIG_ENV_ADDR		(CONFIG_SYS_FLASH_BASE + 0x0F0000) /* addr of environment */
 #endif
 #ifdef CONFIG_AMD_LV400
 #define PHYS_FLASH_SIZE		0x00080000 /* 512KB */
-#define CFG_MAX_FLASH_SECT	(11)	/* max number of sectors on one chip */
-#define CFG_ENV_ADDR		(CFG_FLASH_BASE + 0x070000) /* addr of environment */
+#define CONFIG_SYS_MAX_FLASH_SECT	(11)	/* max number of sectors on one chip */
+#define CONFIG_ENV_ADDR		(CONFIG_SYS_FLASH_BASE + 0x070000) /* addr of environment */
 #endif
 
 /* timeout values are in ticks */
-#define CFG_FLASH_ERASE_TOUT	(5*CFG_HZ) /* Timeout for Flash Erase */
-#define CFG_FLASH_WRITE_TOUT	(5*CFG_HZ) /* Timeout for Flash Write */
+#define CONFIG_SYS_FLASH_ERASE_TOUT	(5*CONFIG_SYS_HZ) /* Timeout for Flash Erase */
+#define CONFIG_SYS_FLASH_WRITE_TOUT	(5*CONFIG_SYS_HZ) /* Timeout for Flash Write */
 
 /* @TODO */
-/*#define	CFG_ENV_IS_IN_FLASH	1*/
-#define CFG_ENV_IS_NOWHERE
-#define CFG_ENV_SIZE		0x10000	/* Total Size of Environment Sector */
+/*#define	CONFIG_ENV_IS_IN_FLASH	1*/
+#define CONFIG_ENV_IS_NOWHERE
+#define CONFIG_ENV_SIZE		0x10000	/* Total Size of Environment Sector */
 
 #ifdef CONFIG_STATUS_LED
 
diff --git a/include/configs/o2dnt.h b/include/configs/o2dnt.h
index 88bdb03e6..bfae7b429 100644
--- a/include/configs/o2dnt.h
+++ b/include/configs/o2dnt.h
@@ -32,7 +32,7 @@
 #define CONFIG_MPC5200
 #define CONFIG_O2DNT		1	/* ... on O2DNT board */
 
-#define CFG_MPC5XXX_CLKIN	33000000 /* ... running at 33.000000MHz */
+#define CONFIG_SYS_MPC5XXX_CLKIN	33000000 /* ... running at 33.000000MHz */
 
 #define BOOTFLAG_COLD		0x01	/* Normal Power-On: Boot from FLASH  */
 #define BOOTFLAG_WARM		0x02	/* Software reboot	     */
@@ -44,7 +44,7 @@
  */
 #define CONFIG_PSC_CONSOLE	5	/* console is on PSC5 */
 #define CONFIG_BAUDRATE		115200	/* ... at 115200 bps */
-#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
 
 /*
  * PCI Mapping:
@@ -64,11 +64,11 @@
 #define CONFIG_PCI_IO_PHYS	CONFIG_PCI_IO_BUS
 #define CONFIG_PCI_IO_SIZE	0x01000000
 
-#define CFG_XLB_PIPELINING	1
+#define CONFIG_SYS_XLB_PIPELINING	1
 
 #define CONFIG_NET_MULTI	1
 #define CONFIG_EEPRO100
-#define CFG_RX_ETH_BUFFER	8  /* use 8 rx buffer on eepro100  */
+#define CONFIG_SYS_RX_ETH_BUFFER	8  /* use 8 rx buffer on eepro100  */
 #define CONFIG_NS8382X		1
 
 /* Partitions */
@@ -103,7 +103,7 @@
 
 
 #if (TEXT_BASE == 0xFF000000)		/* Boot low with 16 MB Flash */
-#   define CFG_LOWBOOT		1
+#   define CONFIG_SYS_LOWBOOT		1
 #else
 #   error "TEXT_BASE must be 0xFF000000"
 #endif
@@ -142,17 +142,17 @@
 /*
  * IPB Bus clocking configuration.
  */
-#define CFG_IPBCLK_EQUALS_XLBCLK		/* define for 133MHz speed */
+#define CONFIG_SYS_IPBCLK_EQUALS_XLBCLK		/* define for 133MHz speed */
 
-#if defined(CFG_IPBCLK_EQUALS_XLBCLK)
+#if defined(CONFIG_SYS_IPBCLK_EQUALS_XLBCLK)
 /*
  * PCI Bus clocking configuration
  *
  * Actually a PCI Clock of 66 MHz is only set (in cpu_init.c) if
- * CFG_IPBCLK_EQUALS_XLBCLK is defined. This is because a PCI Clock
+ * CONFIG_SYS_IPBCLK_EQUALS_XLBCLK is defined. This is because a PCI Clock
  *  of 66 MHz yet hasn't been tested with a IPB Bus Clock of 66 MHz.
  */
-#define CFG_PCICLK_EQUALS_IPBCLK_DIV2	/* define for 66MHz speed */
+#define CONFIG_SYS_PCICLK_EQUALS_IPBCLK_DIV2	/* define for 66MHz speed */
 #endif
 #endif
 
@@ -160,10 +160,10 @@
  * I2C configuration
  */
 #define CONFIG_HARD_I2C		1	/* I2C with hardware support */
-#define CFG_I2C_MODULE		1	/* Select I2C module #1 or #2 */
+#define CONFIG_SYS_I2C_MODULE		1	/* Select I2C module #1 or #2 */
 
-#define CFG_I2C_SPEED		100000 /* 100 kHz */
-#define CFG_I2C_SLAVE		0x7F
+#define CONFIG_SYS_I2C_SPEED		100000 /* 100 kHz */
+#define CONFIG_SYS_I2C_SLAVE		0x7F
 
 /*
  * EEPROM configuration:
@@ -174,60 +174,60 @@
  * 0x50 ... 0x57 each 256 bytes in size
  *
  */
-#define CFG_I2C_FRAM
-#define CFG_I2C_EEPROM_ADDR		0x50	/* 1010000x */
-#define CFG_I2C_EEPROM_ADDR_LEN		1
-#define CFG_EEPROM_PAGE_WRITE_BITS	3
+#define CONFIG_SYS_I2C_FRAM
+#define CONFIG_SYS_I2C_EEPROM_ADDR		0x50	/* 1010000x */
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN		1
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS	3
 /*
  * There is no write delay with FRAM, write operations are performed at bus
  * speed. Thus, no status polling or write delay is needed.
  */
-/*#define CFG_EEPROM_PAGE_WRITE_DELAY_MS	70*/
+/*#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	70*/
 
 
 /*
  * Flash configuration
  */
-#define CFG_FLASH_BASE		0xFF000000
-#define CFG_FLASH_SIZE		0x01000000
-#define CFG_ENV_ADDR		(CFG_FLASH_BASE + 0x00040000)
+#define CONFIG_SYS_FLASH_BASE		0xFF000000
+#define CONFIG_SYS_FLASH_SIZE		0x01000000
+#define CONFIG_ENV_ADDR		(CONFIG_SYS_FLASH_BASE + 0x00040000)
 
-#define CFG_MAX_FLASH_BANKS	1	/* max num of memory banks      */
-#define CFG_MAX_FLASH_SECT	128	/* max num of sects on one chip */
+#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max num of memory banks      */
+#define CONFIG_SYS_MAX_FLASH_SECT	128	/* max num of sects on one chip */
 
-#define CFG_FLASH_ERASE_TOUT	240000	/* Flash Erase Timeout (in ms)  */
-#define CFG_FLASH_WRITE_TOUT	500	/* Flash Write Timeout (in ms)  */
-#define CFG_FLASH_UNLOCK_TOUT	10000	/* Timeout for Flash Clear Lock Bits (in ms) */
-#define CFG_FLASH_PROTECTION		/* "Real" (hardware) sectors protection */
+#define CONFIG_SYS_FLASH_ERASE_TOUT	240000	/* Flash Erase Timeout (in ms)  */
+#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Flash Write Timeout (in ms)  */
+#define CONFIG_SYS_FLASH_UNLOCK_TOUT	10000	/* Timeout for Flash Clear Lock Bits (in ms) */
+#define CONFIG_SYS_FLASH_PROTECTION		/* "Real" (hardware) sectors protection */
 
 /*
  * Environment settings
  */
-#define CFG_ENV_IS_IN_FLASH	1
-#define CFG_ENV_SIZE		0x20000
-#define CFG_ENV_SECT_SIZE	0x20000
+#define CONFIG_ENV_IS_IN_FLASH	1
+#define CONFIG_ENV_SIZE		0x20000
+#define CONFIG_ENV_SECT_SIZE	0x20000
 #define CONFIG_ENV_OVERWRITE	1
 
 /*
  * Memory map
  */
-#define CFG_MBAR		0xF0000000
-#define CFG_SDRAM_BASE		0x00000000
-#define CFG_DEFAULT_MBAR	0x80000000
+#define CONFIG_SYS_MBAR		0xF0000000
+#define CONFIG_SYS_SDRAM_BASE		0x00000000
+#define CONFIG_SYS_DEFAULT_MBAR	0x80000000
 
 /* Use SRAM until RAM will be available */
-#define CFG_INIT_RAM_ADDR	MPC5XXX_SRAM
-#define CFG_INIT_RAM_END	MPC5XXX_SRAM_SIZE	/* End of used area in DPRAM */
+#define CONFIG_SYS_INIT_RAM_ADDR	MPC5XXX_SRAM
+#define CONFIG_SYS_INIT_RAM_END	MPC5XXX_SRAM_SIZE	/* End of used area in DPRAM */
 
 
-#define CFG_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
-#define CFG_MONITOR_BASE	TEXT_BASE
-#define CFG_MONITOR_LEN		(192 << 10)	/* Reserve 192 kB for Monitor	*/
-#define CFG_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/
-#define CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
+#define CONFIG_SYS_MONITOR_BASE	TEXT_BASE
+#define CONFIG_SYS_MONITOR_LEN		(192 << 10)	/* Reserve 192 kB for Monitor	*/
+#define CONFIG_SYS_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/
+#define CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
 
 /*
  * Ethernet configuration
@@ -242,65 +242,65 @@
 /*
  * GPIO configuration
  */
-/*#define CFG_GPS_PORT_CONFIG	0x10002004 */
-#define CFG_GPS_PORT_CONFIG	0x00002006	/* no CAN */
+/*#define CONFIG_SYS_GPS_PORT_CONFIG	0x10002004 */
+#define CONFIG_SYS_GPS_PORT_CONFIG	0x00002006	/* no CAN */
 
 /*
  * Miscellaneous configurable options
  */
-#define CFG_LONGHELP			/* undef to save memory	    */
-#define CFG_PROMPT		"=> "	/* Monitor Command Prompt   */
+#define CONFIG_SYS_LONGHELP			/* undef to save memory	    */
+#define CONFIG_SYS_PROMPT		"=> "	/* Monitor Command Prompt   */
 
 #if defined(CONFIG_CMD_KGDB)
-#define CFG_CBSIZE		1024	/* Console I/O Buffer Size  */
+#define CONFIG_SYS_CBSIZE		1024	/* Console I/O Buffer Size  */
 #else
-#define CFG_CBSIZE		256	/* Console I/O Buffer Size  */
+#define CONFIG_SYS_CBSIZE		256	/* Console I/O Buffer Size  */
 #endif
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16)	/* Print Buffer Size */
-#define CFG_MAXARGS		16		/* max number of command args	*/
-#define CFG_BARGSIZE		CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)	/* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS		16		/* max number of command args	*/
+#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
 
-#define CFG_MEMTEST_START	0x00100000	/* memtest works on */
-#define CFG_MEMTEST_END		0x00f00000	/* 1 ... 15 MB in DRAM	*/
+#define CONFIG_SYS_MEMTEST_START	0x00100000	/* memtest works on */
+#define CONFIG_SYS_MEMTEST_END		0x00f00000	/* 1 ... 15 MB in DRAM	*/
 
-#define CFG_LOAD_ADDR		0x100000	/* default load address */
+#define CONFIG_SYS_LOAD_ADDR		0x100000	/* default load address */
 
-#define CFG_HZ			1000	/* decrementer freq: 1 ms ticks */
+#define CONFIG_SYS_HZ			1000	/* decrementer freq: 1 ms ticks */
 
-#define CFG_CACHELINE_SIZE	32	/* For MPC5xxx CPUs */
+#define CONFIG_SYS_CACHELINE_SIZE	32	/* For MPC5xxx CPUs */
 #if defined(CONFIG_CMD_KGDB)
-#  define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value */
+#  define CONFIG_SYS_CACHELINE_SHIFT	5	/* log base 2 of the above value */
 #endif
 
 /*
  * Various low-level settings
  */
 #if defined(CONFIG_MPC5200)
-#define CFG_HID0_INIT		HID0_ICE | HID0_ICFI
-#define CFG_HID0_FINAL		HID0_ICE
+#define CONFIG_SYS_HID0_INIT		HID0_ICE | HID0_ICFI
+#define CONFIG_SYS_HID0_FINAL		HID0_ICE
 #else
-#define CFG_HID0_INIT		0
-#define CFG_HID0_FINAL		0
+#define CONFIG_SYS_HID0_INIT		0
+#define CONFIG_SYS_HID0_FINAL		0
 #endif
 
-#define CFG_BOOTCS_START	CFG_FLASH_BASE
-#define CFG_BOOTCS_SIZE		CFG_FLASH_SIZE
+#define CONFIG_SYS_BOOTCS_START	CONFIG_SYS_FLASH_BASE
+#define CONFIG_SYS_BOOTCS_SIZE		CONFIG_SYS_FLASH_SIZE
 
-#ifdef CFG_PCICLK_EQUALS_IPBCLK_DIV2
+#ifdef CONFIG_SYS_PCICLK_EQUALS_IPBCLK_DIV2
 /*
  * For 66 MHz PCI clock additional Wait State is needed for CS0 (flash).
  */
-#define CFG_BOOTCS_CFG		0x00057801 /* for pci_clk = 66 MHz */
+#define CONFIG_SYS_BOOTCS_CFG		0x00057801 /* for pci_clk = 66 MHz */
 #else
-#define CFG_BOOTCS_CFG		0x00047801 /* for pci_clk = 33 MHz */
+#define CONFIG_SYS_BOOTCS_CFG		0x00047801 /* for pci_clk = 33 MHz */
 #endif
 
-#define CFG_CS0_START		CFG_FLASH_BASE
-#define CFG_CS0_SIZE		CFG_FLASH_SIZE
+#define CONFIG_SYS_CS0_START		CONFIG_SYS_FLASH_BASE
+#define CONFIG_SYS_CS0_SIZE		CONFIG_SYS_FLASH_SIZE
 
-#define CFG_CS_BURST		0x00000000
-#define CFG_CS_DEADCYCLE	0x33333333
+#define CONFIG_SYS_CS_BURST		0x00000000
+#define CONFIG_SYS_CS_DEADCYCLE	0x33333333
 
-#define CFG_RESET_ADDRESS	0xff000000
+#define CONFIG_SYS_RESET_ADDRESS	0xff000000
 
 #endif /* __CONFIG_H */
diff --git a/include/configs/ocotea.h b/include/configs/ocotea.h
index 407aae721..2e809b0f3 100644
--- a/include/configs/ocotea.h
+++ b/include/configs/ocotea.h
@@ -56,33 +56,33 @@
  * Base addresses -- Note these are effective addresses where the
  * actual resources get mapped (not physical addresses)
  *----------------------------------------------------------------------*/
-#define CFG_FLASH_BASE	    0xff800000	    /* start of FLASH		*/
-#define CFG_PCI_MEMBASE	    0x80000000	    /* mapped pci memory	*/
-#define CFG_PERIPHERAL_BASE 0xe0000000	    /* internal peripherals	*/
-#define CFG_ISRAM_BASE	    0xc0000000	    /* internal SRAM		*/
-#define CFG_PCI_BASE	    0xd0000000	    /* internal PCI regs	*/
+#define CONFIG_SYS_FLASH_BASE	    0xff800000	    /* start of FLASH		*/
+#define CONFIG_SYS_PCI_MEMBASE	    0x80000000	    /* mapped pci memory	*/
+#define CONFIG_SYS_PERIPHERAL_BASE 0xe0000000	    /* internal peripherals	*/
+#define CONFIG_SYS_ISRAM_BASE	    0xc0000000	    /* internal SRAM		*/
+#define CONFIG_SYS_PCI_BASE	    0xd0000000	    /* internal PCI regs	*/
 
-#define CFG_FPGA_BASE	    (CFG_PERIPHERAL_BASE + 0x08300000)
-#define CFG_NVRAM_BASE_ADDR (CFG_PERIPHERAL_BASE + 0x08000000)
+#define CONFIG_SYS_FPGA_BASE	    (CONFIG_SYS_PERIPHERAL_BASE + 0x08300000)
+#define CONFIG_SYS_NVRAM_BASE_ADDR (CONFIG_SYS_PERIPHERAL_BASE + 0x08000000)
 
 /*-----------------------------------------------------------------------
  * Initial RAM & stack pointer (placed in internal SRAM)
  *----------------------------------------------------------------------*/
-#define CFG_TEMP_STACK_OCM  1
-#define CFG_OCM_DATA_ADDR   CFG_ISRAM_BASE
-#define CFG_INIT_RAM_ADDR   CFG_ISRAM_BASE  /* Initial RAM address	*/
-#define CFG_INIT_RAM_END    0x2000	    /* End of used area in RAM	*/
-#define CFG_GBL_DATA_SIZE   128		    /* num bytes initial data	*/
+#define CONFIG_SYS_TEMP_STACK_OCM  1
+#define CONFIG_SYS_OCM_DATA_ADDR   CONFIG_SYS_ISRAM_BASE
+#define CONFIG_SYS_INIT_RAM_ADDR   CONFIG_SYS_ISRAM_BASE  /* Initial RAM address	*/
+#define CONFIG_SYS_INIT_RAM_END    0x2000	    /* End of used area in RAM	*/
+#define CONFIG_SYS_GBL_DATA_SIZE   128		    /* num bytes initial data	*/
 
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_POST_WORD_ADDR	(CFG_GBL_DATA_OFFSET - 0x4)
-#define CFG_INIT_SP_OFFSET	CFG_POST_WORD_ADDR
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_POST_WORD_ADDR	(CONFIG_SYS_GBL_DATA_OFFSET - 0x4)
+#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_POST_WORD_ADDR
 
 /*-----------------------------------------------------------------------
  * Serial Port
  *----------------------------------------------------------------------*/
 #undef	CONFIG_SERIAL_SOFTWARE_FIFO
-#define CFG_EXT_SERIAL_CLOCK	(1843200 * 6)	/* Ext clk @ 11.059 MHz */
+#define CONFIG_SYS_EXT_SERIAL_CLOCK	(1843200 * 6)	/* Ext clk @ 11.059 MHz */
 
 /*-----------------------------------------------------------------------
  * Environment
@@ -93,9 +93,9 @@
  *       supported for backward compatibility.
  */
 #if 1
-#define CFG_ENV_IS_IN_FLASH     1	/* use FLASH for environment vars	*/
+#define CONFIG_ENV_IS_IN_FLASH     1	/* use FLASH for environment vars	*/
 #else
-#define CFG_ENV_IS_IN_NVRAM	1	/* use NVRAM for environment vars	*/
+#define CONFIG_ENV_IS_IN_NVRAM	1	/* use NVRAM for environment vars	*/
 #endif
 
 
@@ -106,41 +106,41 @@
  * The DS1743 code assumes this condition (i.e. -- it assumes the base
  * address for the RTC registers is:
  *
- *	CFG_NVRAM_BASE_ADDR + CFG_NVRAM_SIZE
+ *	CONFIG_SYS_NVRAM_BASE_ADDR + CONFIG_SYS_NVRAM_SIZE
  *
  *----------------------------------------------------------------------*/
-#define CFG_NVRAM_SIZE	    (0x2000 - 8)    /* NVRAM size(8k)- RTC regs */
+#define CONFIG_SYS_NVRAM_SIZE	    (0x2000 - 8)    /* NVRAM size(8k)- RTC regs */
 #define CONFIG_RTC_DS174x	1		    /* DS1743 RTC		*/
 
-#ifdef CFG_ENV_IS_IN_NVRAM
-#define CFG_ENV_SIZE		0x1000	    /* Size of Environment vars */
-#define CFG_ENV_ADDR		\
-	(CFG_NVRAM_BASE_ADDR+CFG_NVRAM_SIZE-CFG_ENV_SIZE)
-#endif /* CFG_ENV_IS_IN_NVRAM */
+#ifdef CONFIG_ENV_IS_IN_NVRAM
+#define CONFIG_ENV_SIZE		0x1000	    /* Size of Environment vars */
+#define CONFIG_ENV_ADDR		\
+	(CONFIG_SYS_NVRAM_BASE_ADDR+CONFIG_SYS_NVRAM_SIZE-CONFIG_ENV_SIZE)
+#endif /* CONFIG_ENV_IS_IN_NVRAM */
 
 /*-----------------------------------------------------------------------
  * FLASH related
  *----------------------------------------------------------------------*/
-#define CFG_MAX_FLASH_BANKS	3		    /* number of banks	    */
-#define CFG_MAX_FLASH_SECT	64		    /* sectors per device   */
+#define CONFIG_SYS_MAX_FLASH_BANKS	3		    /* number of banks	    */
+#define CONFIG_SYS_MAX_FLASH_SECT	64		    /* sectors per device   */
 
-#undef	CFG_FLASH_CHECKSUM
-#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
-#define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
+#undef	CONFIG_SYS_FLASH_CHECKSUM
+#define CONFIG_SYS_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
+#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
 
-#define CFG_FLASH_ADDR0         0x5555
-#define CFG_FLASH_ADDR1         0x2aaa
-#define CFG_FLASH_WORD_SIZE     unsigned char
+#define CONFIG_SYS_FLASH_ADDR0         0x5555
+#define CONFIG_SYS_FLASH_ADDR1         0x2aaa
+#define CONFIG_SYS_FLASH_WORD_SIZE     unsigned char
 
-#ifdef CFG_ENV_IS_IN_FLASH
-#define CFG_ENV_SECT_SIZE	0x10000		/* size of one complete sector	*/
-#define CFG_ENV_ADDR		(CFG_MONITOR_BASE-CFG_ENV_SECT_SIZE)
-#define	CFG_ENV_SIZE		0x4000	/* Total Size of Environment Sector	*/
+#ifdef CONFIG_ENV_IS_IN_FLASH
+#define CONFIG_ENV_SECT_SIZE	0x10000		/* size of one complete sector	*/
+#define CONFIG_ENV_ADDR		(CONFIG_SYS_MONITOR_BASE-CONFIG_ENV_SECT_SIZE)
+#define	CONFIG_ENV_SIZE		0x4000	/* Total Size of Environment Sector	*/
 
 /* Address and size of Redundant Environment Sector	*/
-#define CFG_ENV_ADDR_REDUND	(CFG_ENV_ADDR-CFG_ENV_SECT_SIZE)
-#define CFG_ENV_SIZE_REDUND	(CFG_ENV_SIZE)
-#endif /* CFG_ENV_IS_IN_FLASH */
+#define CONFIG_ENV_ADDR_REDUND	(CONFIG_ENV_ADDR-CONFIG_ENV_SECT_SIZE)
+#define CONFIG_ENV_SIZE_REDUND	(CONFIG_ENV_SIZE)
+#endif /* CONFIG_ENV_IS_IN_FLASH */
 
 /*-----------------------------------------------------------------------
  * DDR SDRAM
@@ -152,14 +152,13 @@
 /*-----------------------------------------------------------------------
  * I2C
  *----------------------------------------------------------------------*/
-#define CFG_I2C_SPEED		400000	/* I2C speed and slave address	*/
+#define CONFIG_SYS_I2C_SPEED		400000	/* I2C speed and slave address	*/
 
-#define CFG_I2C_MULTI_EEPROMS
-#define CFG_I2C_EEPROM_ADDR	(0xa8>>1)
-#define CFG_I2C_EEPROM_ADDR_LEN 1
-#define CFG_EEPROM_PAGE_WRITE_ENABLE
-#define CFG_EEPROM_PAGE_WRITE_BITS 3
-#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10
+#define CONFIG_SYS_I2C_MULTI_EEPROMS
+#define CONFIG_SYS_I2C_EEPROM_ADDR	(0xa8>>1)
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10
 
 /*
  * Default environment variables
@@ -201,12 +200,12 @@
 #define CONFIG_PCI			/* include pci support		*/
 #define CONFIG_PCI_PNP			/* do pci plug-and-play		*/
 #define CONFIG_PCI_SCAN_SHOW		/* show pci devices on startup	*/
-#define CFG_PCI_TARGBASE    0x80000000	/* PCIaddr mapped to CFG_PCI_MEMBASE */
+#define CONFIG_SYS_PCI_TARGBASE    0x80000000	/* PCIaddr mapped to CONFIG_SYS_PCI_MEMBASE */
 
 /* Board-specific PCI */
-#define CFG_PCI_TARGET_INIT		/* let board init pci target    */
+#define CONFIG_SYS_PCI_TARGET_INIT		/* let board init pci target    */
 
-#define CFG_PCI_SUBSYS_VENDORID 0x10e8	/* AMCC */
-#define CFG_PCI_SUBSYS_DEVICEID 0xcafe	/* Whatever */
+#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x10e8	/* AMCC */
+#define CONFIG_SYS_PCI_SUBSYS_DEVICEID 0xcafe	/* Whatever */
 
 #endif	/* __CONFIG_H */
diff --git a/include/configs/omap1510.h b/include/configs/omap1510.h
index 6787b1928..931560cdc 100644
--- a/include/configs/omap1510.h
+++ b/include/configs/omap1510.h
@@ -482,7 +482,7 @@
 /*  CNTL_TIMER register bits */
 #define MPUTIM_FREE		(1<<6)
 #define MPUTIM_CLOCK_ENABLE	(1<<5)
-#define MPUTIM_PTV_MASK		(0x7<<PTV_BIT)
+#define MPUTIM_PTV_MASK		(0x7<<MPUTIM_PTV_BIT)
 #define MPUTIM_PTV_BIT		2
 #define MPUTIM_AR		(1<<1)
 #define MPUTIM_ST		(1<<0)
diff --git a/include/configs/omap1510inn.h b/include/configs/omap1510inn.h
index 46b30e025..c7d1b6c03 100644
--- a/include/configs/omap1510inn.h
+++ b/include/configs/omap1510inn.h
@@ -49,8 +49,8 @@
 /*
  * Size of malloc() pool
  */
-#define CFG_MALLOC_LEN		(CFG_ENV_SIZE + 128*1024)
-#define CFG_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
+#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + 128*1024)
+#define CONFIG_SYS_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
 
 /*
  * Hardware drivers
@@ -67,11 +67,11 @@
 /*
  * NS16550 Configuration
  */
-#define CFG_NS16550
-#define CFG_NS16550_SERIAL
-#define CFG_NS16550_REG_SIZE	(-4)
-#define CFG_NS16550_CLK		(CONFIG_SYS_CLK_FREQ)	/* can be 12M/32Khz or 48Mhz  */
-#define CFG_NS16550_COM1	0xfffb0000		/* uart1, bluetooth uart on helen */
+#define CONFIG_SYS_NS16550
+#define CONFIG_SYS_NS16550_SERIAL
+#define CONFIG_SYS_NS16550_REG_SIZE	(-4)
+#define CONFIG_SYS_NS16550_CLK		(CONFIG_SYS_CLK_FREQ)	/* can be 12M/32Khz or 48Mhz  */
+#define CONFIG_SYS_NS16550_COM1	0xfffb0000		/* uart1, bluetooth uart on helen */
 
 /*
  * select serial console configuration
@@ -84,7 +84,7 @@
 #define CONFIG_ENV_OVERWRITE
 #define CONFIG_CONS_INDEX	1
 #define CONFIG_BAUDRATE		115200
-#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
 
 
 /*
@@ -109,7 +109,7 @@
 #define CONFIG_BOOTDELAY	3
 #define CONFIG_BOOTARGS		"console=ttyS0,115200n8 noinitrd root=/dev/nfs ip=bootp"
 #define CONFIG_BOOTCOMMAND	"bootp;tftp;bootm"
-#define CFG_AUTOLOAD		"n"		/* No autoload */
+#define CONFIG_SYS_AUTOLOAD		"n"		/* No autoload */
 
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	115200		/* speed to run kgdb serial port */
@@ -120,26 +120,26 @@
 /*
  * Miscellaneous configurable options
  */
-#define CFG_LONGHELP				/* undef to save memory		*/
-#define CFG_PROMPT		"OMAP1510 Innovator # " /* Monitor Command Prompt	*/
-#define CFG_CBSIZE		256		/* Console I/O Buffer Size	*/
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define CFG_MAXARGS		16		/* max number of command args	*/
-#define CFG_BARGSIZE		CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+#define CONFIG_SYS_LONGHELP				/* undef to save memory		*/
+#define CONFIG_SYS_PROMPT		"OMAP1510 Innovator # " /* Monitor Command Prompt	*/
+#define CONFIG_SYS_CBSIZE		256		/* Console I/O Buffer Size	*/
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS		16		/* max number of command args	*/
+#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
 
-#define CFG_MEMTEST_START	0x10000000	/* memtest works on	*/
-#define CFG_MEMTEST_END		0x12000000	/* 32 MB in DRAM	*/
+#define CONFIG_SYS_MEMTEST_START	0x10000000	/* memtest works on	*/
+#define CONFIG_SYS_MEMTEST_END		0x12000000	/* 32 MB in DRAM	*/
 
-#undef	CFG_CLKS_IN_HZ		/* everything, incl board info, in Hz */
+#undef	CONFIG_SYS_CLKS_IN_HZ		/* everything, incl board info, in Hz */
 
-#define CFG_LOAD_ADDR		0x10000000	/* default load address */
+#define CONFIG_SYS_LOAD_ADDR		0x10000000	/* default load address */
 
 /* The 1510 has 3 timers, they can be driven by the RefClk (12Mhz) or by DPLL1.
  * This time is further subdivided by a local divisor.
  */
-#define CFG_TIMERBASE	0xFFFEC500	    /* use timer 1 */
-#define CFG_PVT		7		    /* 2^(pvt+1), divide by 256 */
-#define CFG_HZ			((CONFIG_SYS_CLK_FREQ)/(2 << CFG_PVT))
+#define CONFIG_SYS_TIMERBASE	0xFFFEC500	    /* use timer 1 */
+#define CONFIG_SYS_PVT		7		    /* 2^(pvt+1), divide by 256 */
+#define CONFIG_SYS_HZ			((CONFIG_SYS_CLK_FREQ)/(2 << CONFIG_SYS_PVT))
 
 /*-----------------------------------------------------------------------
  * Stack sizes
@@ -161,35 +161,35 @@
 
 #define PHYS_FLASH_1		0x00000000 /* Flash Bank #1 */
 
-#define CFG_FLASH_BASE		PHYS_FLASH_1
+#define CONFIG_SYS_FLASH_BASE		PHYS_FLASH_1
 
 /*-----------------------------------------------------------------------
  * FLASH and environment organization
  */
-#define CFG_MAX_FLASH_BANKS	2	/* max number of memory banks */
+#define CONFIG_SYS_MAX_FLASH_BANKS	2	/* max number of memory banks */
 #define PHYS_FLASH_SIZE		0x01000000 /* 16MB */
 #define PHYS_FLASH_SECT_SIZE	(128*1024)	/* Size of a sector (128kB) */
-#define CFG_MAX_FLASH_SECT	(128)	/* max number of sectors on one chip */
-#define CFG_ENV_ADDR		(CFG_FLASH_BASE + PHYS_FLASH_SECT_SIZE)
-#define CFG_MONITOR_BASE	CFG_FLASH_BASE	/* Monitor at beginning of flash */
-#define CFG_MONITOR_LEN		PHYS_FLASH_SECT_SIZE	/* Reserve 1 sector */
-#define CFG_FLASH_BANKS_LIST	{ CFG_FLASH_BASE, CFG_FLASH_BASE + PHYS_FLASH_SIZE }
+#define CONFIG_SYS_MAX_FLASH_SECT	(128)	/* max number of sectors on one chip */
+#define CONFIG_ENV_ADDR		(CONFIG_SYS_FLASH_BASE + PHYS_FLASH_SECT_SIZE)
+#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_FLASH_BASE	/* Monitor at beginning of flash */
+#define CONFIG_SYS_MONITOR_LEN		PHYS_FLASH_SECT_SIZE	/* Reserve 1 sector */
+#define CONFIG_SYS_FLASH_BANKS_LIST	{ CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE + PHYS_FLASH_SIZE }
 
 /*-----------------------------------------------------------------------
  * FLASH driver setup
  */
-#define CFG_FLASH_CFI		1	/* Flash memory is CFI compliant */
+#define CONFIG_SYS_FLASH_CFI		1	/* Flash memory is CFI compliant */
 #define CONFIG_FLASH_CFI_DRIVER	1	/* Use drivers/mtd/cfi_flash.c */
-#define CFG_FLASH_USE_BUFFER_WRITE	1	/* Use buffered writes (~10x faster) */
-#define CFG_FLASH_PROTECTION	1	/* Use hardware sector protection */
+#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE	1	/* Use buffered writes (~10x faster) */
+#define CONFIG_SYS_FLASH_PROTECTION	1	/* Use hardware sector protection */
 
 /* timeout values are in ticks */
-#define CFG_FLASH_ERASE_TOUT	(20*CFG_HZ) /* Timeout for Flash Erase */
-#define CFG_FLASH_WRITE_TOUT	(20*CFG_HZ) /* Timeout for Flash Write */
+#define CONFIG_SYS_FLASH_ERASE_TOUT	(20*CONFIG_SYS_HZ) /* Timeout for Flash Erase */
+#define CONFIG_SYS_FLASH_WRITE_TOUT	(20*CONFIG_SYS_HZ) /* Timeout for Flash Write */
 
-#define CFG_ENV_IS_IN_FLASH	1
-#define CFG_ENV_SECT_SIZE	PHYS_FLASH_SECT_SIZE	/* Total Size of Environment Sector */
-#define CFG_ENV_SIZE		CFG_ENV_SECT_SIZE
-#define CFG_ENV_OFFSET		( CFG_MONITOR_BASE + CFG_MONITOR_LEN )	/* Environment after Monitor */
+#define CONFIG_ENV_IS_IN_FLASH	1
+#define CONFIG_ENV_SECT_SIZE	PHYS_FLASH_SECT_SIZE	/* Total Size of Environment Sector */
+#define CONFIG_ENV_SIZE		CONFIG_ENV_SECT_SIZE
+#define CONFIG_ENV_OFFSET		( CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN )	/* Environment after Monitor */
 
 #endif	/* __CONFIG_H */
diff --git a/include/configs/omap1610h2.h b/include/configs/omap1610h2.h
index 74bba05fe..e2a63607c 100644
--- a/include/configs/omap1610h2.h
+++ b/include/configs/omap1610h2.h
@@ -51,8 +51,8 @@
 /*
  * Size of malloc() pool
  */
-#define CFG_MALLOC_LEN	(CFG_ENV_SIZE + 128*1024)
-#define CFG_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
+#define CONFIG_SYS_MALLOC_LEN	(CONFIG_ENV_SIZE + 128*1024)
+#define CONFIG_SYS_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
 
 /*
  * Hardware drivers
@@ -64,11 +64,11 @@
 /*
  * NS16550 Configuration
  */
-#define CFG_NS16550
-#define CFG_NS16550_SERIAL
-#define CFG_NS16550_REG_SIZE	(-4)
-#define CFG_NS16550_CLK	(48000000)		/* can be 12M/32Khz or 48Mhz */
-#define CFG_NS16550_COM1	0xfffb0000	/* uart1, bluetooth uart */
+#define CONFIG_SYS_NS16550
+#define CONFIG_SYS_NS16550_SERIAL
+#define CONFIG_SYS_NS16550_REG_SIZE	(-4)
+#define CONFIG_SYS_NS16550_CLK	(48000000)		/* can be 12M/32Khz or 48Mhz */
+#define CONFIG_SYS_NS16550_COM1	0xfffb0000	/* uart1, bluetooth uart */
 
 /*
  * select serial console configuration
@@ -79,7 +79,7 @@
 #define CONFIG_ENV_OVERWRITE
 #define CONFIG_CONS_INDEX	1
 #define CONFIG_BAUDRATE	115200
-#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
 
 
 /*
@@ -104,7 +104,7 @@
 #define CONFIG_BOOTDELAY	3
 #define CONFIG_BOOTARGS	"console=ttyS0,115200n8 noinitrd root=/dev/nfs ip=dhcp"
 #define CONFIG_BOOTCOMMAND      "bootp;tftp;bootm"
-#define CFG_AUTOLOAD            "n"             /* No autoload */
+#define CONFIG_SYS_AUTOLOAD            "n"             /* No autoload */
 
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	115200	/* speed to run kgdb serial port */
@@ -114,27 +114,27 @@
 /*
  * Miscellaneous configurable options
  */
-#define CFG_LONGHELP	/* undef to save memory */
-#define CFG_PROMPT	"OMAP1610 H2 # "	/* Monitor Command Prompt */
-#define CFG_CBSIZE	256		/* Console I/O Buffer Size */
+#define CONFIG_SYS_LONGHELP	/* undef to save memory */
+#define CONFIG_SYS_PROMPT	"OMAP1610 H2 # "	/* Monitor Command Prompt */
+#define CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size */
 /* Print Buffer Size */
-#define CFG_PBSIZE	(CFG_CBSIZE+sizeof(CFG_PROMPT)+16)
-#define CFG_MAXARGS	16		/* max number of command args */
-#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size */
+#define CONFIG_SYS_PBSIZE	(CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
+#define CONFIG_SYS_MAXARGS	16		/* max number of command args */
+#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size */
 
-#define CFG_MEMTEST_START	0x10000000	/* memtest works on */
-#define CFG_MEMTEST_END	0x12000000	/* 32 MB in DRAM */
+#define CONFIG_SYS_MEMTEST_START	0x10000000	/* memtest works on */
+#define CONFIG_SYS_MEMTEST_END	0x12000000	/* 32 MB in DRAM */
 
-#undef	CFG_CLKS_IN_HZ		/* everything, incl board info, in Hz */
+#undef	CONFIG_SYS_CLKS_IN_HZ		/* everything, incl board info, in Hz */
 
-#define CFG_LOAD_ADDR	0x10000000	/* default load address */
+#define CONFIG_SYS_LOAD_ADDR	0x10000000	/* default load address */
 
 /* The 1610 has 6 timers, they can be driven by the RefClk (12Mhz) or by
  * DPLL1. This time is further subdivided by a local divisor.
  */
-#define CFG_TIMERBASE	0xFFFEC500	/* use timer 1 */
-#define CFG_PVT	7	/* 2^(pvt+1), divide by 256 */
-#define CFG_HZ	((CONFIG_SYS_CLK_FREQ)/(2 << CFG_PVT))
+#define CONFIG_SYS_TIMERBASE	0xFFFEC500	/* use timer 1 */
+#define CONFIG_SYS_PVT	7	/* 2^(pvt+1), divide by 256 */
+#define CONFIG_SYS_HZ	((CONFIG_SYS_CLK_FREQ)/(2 << CONFIG_SYS_PVT))
 
 /*-----------------------------------------------------------------------
  * Stack sizes
@@ -162,33 +162,33 @@
 #ifndef __ASSEMBLY__
 extern unsigned long omap_flash_base;		/* set in flash__init */
 #endif
-#define CFG_FLASH_BASE		omap_flash_base
+#define CONFIG_SYS_FLASH_BASE		omap_flash_base
 
 #elif defined(CONFIG_CS0_BOOT)
 
-#define CFG_FLASH_BASE		PHYS_FLASH_1_BM0
+#define CONFIG_SYS_FLASH_BASE		PHYS_FLASH_1_BM0
 
 #else
 
-#define CFG_FLASH_BASE		PHYS_FLASH_1_BM1
+#define CONFIG_SYS_FLASH_BASE		PHYS_FLASH_1_BM1
 
 #endif
 
 /*-----------------------------------------------------------------------
  * FLASH and environment organization
  */
-#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks */
+#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks */
 #define PHYS_FLASH_SIZE	0x02000000	/* 32MB */
-#define CFG_MAX_FLASH_SECT	(259)	/* max number of sectors on one chip */
+#define CONFIG_SYS_MAX_FLASH_SECT	(259)	/* max number of sectors on one chip */
 /* addr of environment */
-#define CFG_ENV_ADDR	(CFG_FLASH_BASE + 0x020000)
+#define CONFIG_ENV_ADDR	(CONFIG_SYS_FLASH_BASE + 0x020000)
 
 /* timeout values are in ticks */
-#define CFG_FLASH_ERASE_TOUT	(20*CFG_HZ)	/* Timeout for Flash Erase */
-#define CFG_FLASH_WRITE_TOUT	(20*CFG_HZ)	/* Timeout for Flash Write */
+#define CONFIG_SYS_FLASH_ERASE_TOUT	(20*CONFIG_SYS_HZ)	/* Timeout for Flash Erase */
+#define CONFIG_SYS_FLASH_WRITE_TOUT	(20*CONFIG_SYS_HZ)	/* Timeout for Flash Write */
 
-#define CFG_ENV_IS_IN_FLASH	1
-#define CFG_ENV_SIZE	0x20000	/* Total Size of Environment Sector */
-#define CFG_ENV_OFFSET	0x20000	/* environment starts here */
+#define CONFIG_ENV_IS_IN_FLASH	1
+#define CONFIG_ENV_SIZE	0x20000	/* Total Size of Environment Sector */
+#define CONFIG_ENV_OFFSET	0x20000	/* environment starts here */
 
 #endif							/* __CONFIG_H */
diff --git a/include/configs/omap1610inn.h b/include/configs/omap1610inn.h
index 734f35439..5dcfce159 100644
--- a/include/configs/omap1610inn.h
+++ b/include/configs/omap1610inn.h
@@ -50,8 +50,8 @@
 /*
  * Size of malloc() pool
  */
-#define CFG_MALLOC_LEN	(CFG_ENV_SIZE + 128*1024)
-#define CFG_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
+#define CONFIG_SYS_MALLOC_LEN	(CONFIG_ENV_SIZE + 128*1024)
+#define CONFIG_SYS_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
 
 /*
  * Hardware drivers
@@ -65,11 +65,11 @@
 /*
  * NS16550 Configuration
  */
-#define CFG_NS16550
-#define CFG_NS16550_SERIAL
-#define CFG_NS16550_REG_SIZE	(-4)
-#define CFG_NS16550_CLK		(48000000)	/* can be 12M/32Khz or 48Mhz */
-#define CFG_NS16550_COM1	0xfffb0000	/* uart1, bluetooth uart on helen */
+#define CONFIG_SYS_NS16550
+#define CONFIG_SYS_NS16550_SERIAL
+#define CONFIG_SYS_NS16550_REG_SIZE	(-4)
+#define CONFIG_SYS_NS16550_CLK		(48000000)	/* can be 12M/32Khz or 48Mhz */
+#define CONFIG_SYS_NS16550_COM1	0xfffb0000	/* uart1, bluetooth uart on helen */
 
 /*
  * select serial console configuration
@@ -80,7 +80,7 @@
 #define CONFIG_ENV_OVERWRITE
 #define CONFIG_CONS_INDEX	1
 #define CONFIG_BAUDRATE	115200
-#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
 
 
 /*
@@ -119,27 +119,27 @@
 /*
  * Miscellaneous configurable options
  */
-#define CFG_LONGHELP	/* undef to save memory     */
-#define CFG_PROMPT	"OMAP1610 Innovator # "	/* Monitor Command Prompt   */
-#define CFG_CBSIZE	256		/* Console I/O Buffer Size  */
+#define CONFIG_SYS_LONGHELP	/* undef to save memory     */
+#define CONFIG_SYS_PROMPT	"OMAP1610 Innovator # "	/* Monitor Command Prompt   */
+#define CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size  */
 /* Print Buffer Size */
-#define CFG_PBSIZE	(CFG_CBSIZE+sizeof(CFG_PROMPT)+16)
-#define CFG_MAXARGS	16		/* max number of command args   */
-#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size    */
+#define CONFIG_SYS_PBSIZE	(CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
+#define CONFIG_SYS_MAXARGS	16		/* max number of command args   */
+#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size    */
 
-#define CFG_MEMTEST_START	0x10000000	/* memtest works on */
-#define CFG_MEMTEST_END	0x12000000	/* 32 MB in DRAM    */
+#define CONFIG_SYS_MEMTEST_START	0x10000000	/* memtest works on */
+#define CONFIG_SYS_MEMTEST_END	0x12000000	/* 32 MB in DRAM    */
 
-#undef	CFG_CLKS_IN_HZ		/* everything, incl board info, in Hz */
+#undef	CONFIG_SYS_CLKS_IN_HZ		/* everything, incl board info, in Hz */
 
-#define CFG_LOAD_ADDR	0x10000000	/* default load address */
+#define CONFIG_SYS_LOAD_ADDR	0x10000000	/* default load address */
 
 /* The 1610 has 6 timers, they can be driven by the RefClk (12Mhz) or by
  * DPLL1. This time is further subdivided by a local divisor.
  */
-#define CFG_TIMERBASE	0xFFFEC500	/* use timer 1 */
-#define CFG_PVT	7	/* 2^(pvt+1), divide by 256 */
-#define CFG_HZ	((CONFIG_SYS_CLK_FREQ)/(2 << CFG_PVT))
+#define CONFIG_SYS_TIMERBASE	0xFFFEC500	/* use timer 1 */
+#define CONFIG_SYS_PVT	7	/* 2^(pvt+1), divide by 256 */
+#define CONFIG_SYS_HZ	((CONFIG_SYS_CLK_FREQ)/(2 << CONFIG_SYS_PVT))
 
 /*-----------------------------------------------------------------------
  * Stack sizes
@@ -167,33 +167,33 @@
 #ifndef __ASSEMBLY__
 extern unsigned long omap_flash_base;		/* set in flash__init */
 #endif
-#define CFG_FLASH_BASE		omap_flash_base
+#define CONFIG_SYS_FLASH_BASE		omap_flash_base
 
 #elif defined(CONFIG_CS0_BOOT)
 
-#define CFG_FLASH_BASE		PHYS_FLASH_1_BM0
+#define CONFIG_SYS_FLASH_BASE		PHYS_FLASH_1_BM0
 
 #else
 
-#define CFG_FLASH_BASE		PHYS_FLASH_1_BM1
+#define CONFIG_SYS_FLASH_BASE		PHYS_FLASH_1_BM1
 
 #endif
 
 /*-----------------------------------------------------------------------
  * FLASH and environment organization
  */
-#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks */
+#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks */
 #define PHYS_FLASH_SIZE	0x02000000	/* 32MB */
-#define CFG_MAX_FLASH_SECT	(259)	/* max number of sectors on one chip */
+#define CONFIG_SYS_MAX_FLASH_SECT	(259)	/* max number of sectors on one chip */
 /* addr of environment */
-#define CFG_ENV_ADDR	(CFG_FLASH_BASE + 0x020000)
+#define CONFIG_ENV_ADDR	(CONFIG_SYS_FLASH_BASE + 0x020000)
 
 /* timeout values are in ticks */
-#define CFG_FLASH_ERASE_TOUT	(20*CFG_HZ)	/* Timeout for Flash Erase */
-#define CFG_FLASH_WRITE_TOUT	(20*CFG_HZ)	/* Timeout for Flash Write */
+#define CONFIG_SYS_FLASH_ERASE_TOUT	(20*CONFIG_SYS_HZ)	/* Timeout for Flash Erase */
+#define CONFIG_SYS_FLASH_WRITE_TOUT	(20*CONFIG_SYS_HZ)	/* Timeout for Flash Write */
 
-#define CFG_ENV_IS_IN_FLASH	1
-#define CFG_ENV_SIZE	0x20000	/* Total Size of Environment Sector */
-#define CFG_ENV_OFFSET	0x20000	/* environment starts here  */
+#define CONFIG_ENV_IS_IN_FLASH	1
+#define CONFIG_ENV_SIZE	0x20000	/* Total Size of Environment Sector */
+#define CONFIG_ENV_OFFSET	0x20000	/* environment starts here  */
 
 #endif							/* __CONFIG_H */
diff --git a/include/configs/omap2420h4.h b/include/configs/omap2420h4.h
index afdcba411..d11868e08 100644
--- a/include/configs/omap2420h4.h
+++ b/include/configs/omap2420h4.h
@@ -47,7 +47,7 @@
 /* On H4, NOR and NAND flash are mutual exclusive.
    Define this if you want to use NAND
  */
-/*#define CFG_NAND_BOOT */
+/*#define CONFIG_SYS_NAND_BOOT */
 
 #ifdef CONFIG_APTIX
 #define V_SCLK                   1500000
@@ -70,9 +70,9 @@
 /*
  * Size of malloc() pool
  */
-#define CFG_ENV_SIZE             SZ_128K     /* Total Size of Environment Sector */
-#define CFG_MALLOC_LEN           (CFG_ENV_SIZE + SZ_128K)
-#define CFG_GBL_DATA_SIZE        128  /* size in bytes reserved for initial data */
+#define CONFIG_ENV_SIZE             SZ_128K     /* Total Size of Environment Sector */
+#define CONFIG_SYS_MALLOC_LEN           (CONFIG_ENV_SIZE + SZ_128K)
+#define CONFIG_SYS_GBL_DATA_SIZE        128  /* size in bytes reserved for initial data */
 
 /*
  * Hardware drivers
@@ -94,11 +94,11 @@
 #define V_NS16550_CLK            (48000000)  /* 48MHz (APLL96/2) */
 #endif
 
-#define CFG_NS16550
-#define CFG_NS16550_SERIAL
-#define CFG_NS16550_REG_SIZE     (-4)
-#define CFG_NS16550_CLK          V_NS16550_CLK   /* 3MHz (1.5MHz*2) */
-#define CFG_NS16550_COM1         OMAP2420_UART1
+#define CONFIG_SYS_NS16550
+#define CONFIG_SYS_NS16550_SERIAL
+#define CONFIG_SYS_NS16550_REG_SIZE     (-4)
+#define CONFIG_SYS_NS16550_CLK          V_NS16550_CLK   /* 3MHz (1.5MHz*2) */
+#define CONFIG_SYS_NS16550_COM1         OMAP2420_UART1
 
 /*
  * select serial console configuration
@@ -109,15 +109,15 @@
    * I2C configuration
    */
 #define CONFIG_HARD_I2C
-#define CFG_I2C_SPEED          100000
-#define CFG_I2C_SLAVE          1
+#define CONFIG_SYS_I2C_SPEED          100000
+#define CONFIG_SYS_I2C_SLAVE          1
 #define CONFIG_DRIVER_OMAP24XX_I2C
 
 /* allow to overwrite serial and ethaddr */
 #define CONFIG_ENV_OVERWRITE
 #define CONFIG_CONS_INDEX        1
 #define CONFIG_BAUDRATE          115200
-#define CFG_BAUDRATE_TABLE       {9600, 19200, 38400, 57600, 115200}
+#define CONFIG_SYS_BAUDRATE_TABLE       {9600, 19200, 38400, 57600, 115200}
 
 
 /*
@@ -125,7 +125,7 @@
  */
 #include <config_cmd_default.h>
 
-#ifdef CFG_NAND_BOOT
+#ifdef CONFIG_SYS_NAND_BOOT
     #define CONFIG_CMD_DHCP
     #define CONFIG_CMD_I2C
     #define CONFIG_CMD_NAND
@@ -152,9 +152,9 @@
  *  Board NAND Info.
  */
 #define CONFIG_NAND_LEGACY
-#define CFG_NAND_ADDR 0x04000000  /* physical address to access nand at CS0*/
+#define CONFIG_SYS_NAND_ADDR 0x04000000  /* physical address to access nand at CS0*/
 
-#define CFG_MAX_NAND_DEVICE 1	/* Max number of NAND devices */
+#define CONFIG_SYS_MAX_NAND_DEVICE 1	/* Max number of NAND devices */
 #define SECTORSIZE          512
 
 #define ADDR_COLUMN         1
@@ -173,7 +173,7 @@
 
 #define NAND_NO_RB          1
 
-#define CFG_NAND_WP
+#define CONFIG_SYS_NAND_WP
 #define NAND_WP_OFF()  do {*(volatile u32 *)(0x6800A050) |= 0x00000010;} while(0)
 #define NAND_WP_ON()  do {*(volatile u32 *)(0x6800A050) &= ~0x00000010;} while(0)
 
@@ -206,20 +206,20 @@
 #define V_PROMPT                 "OMAP242x H4 # "
 #endif
 
-#define CFG_LONGHELP             /* undef to save memory */
-#define CFG_PROMPT               V_PROMPT
-#define CFG_CBSIZE               256  /* Console I/O Buffer Size */
+#define CONFIG_SYS_LONGHELP             /* undef to save memory */
+#define CONFIG_SYS_PROMPT               V_PROMPT
+#define CONFIG_SYS_CBSIZE               256  /* Console I/O Buffer Size */
 /* Print Buffer Size */
-#define CFG_PBSIZE               (CFG_CBSIZE+sizeof(CFG_PROMPT)+16)
-#define CFG_MAXARGS              16          /* max number of command args */
-#define CFG_BARGSIZE             CFG_CBSIZE  /* Boot Argument Buffer Size */
+#define CONFIG_SYS_PBSIZE               (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
+#define CONFIG_SYS_MAXARGS              16          /* max number of command args */
+#define CONFIG_SYS_BARGSIZE             CONFIG_SYS_CBSIZE  /* Boot Argument Buffer Size */
 
-#define CFG_MEMTEST_START        (OMAP2420_SDRC_CS0)  /* memtest works on */
-#define CFG_MEMTEST_END          (OMAP2420_SDRC_CS0+SZ_31M)
+#define CONFIG_SYS_MEMTEST_START        (OMAP2420_SDRC_CS0)  /* memtest works on */
+#define CONFIG_SYS_MEMTEST_END          (OMAP2420_SDRC_CS0+SZ_31M)
 
-#undef	CFG_CLKS_IN_HZ           /* everything, incl board info, in Hz */
+#undef	CONFIG_SYS_CLKS_IN_HZ           /* everything, incl board info, in Hz */
 
-#define CFG_LOAD_ADDR            (OMAP2420_SDRC_CS0) /* default load address */
+#define CONFIG_SYS_LOAD_ADDR            (OMAP2420_SDRC_CS0) /* default load address */
 
 /* The 2420 has 12 GP timers, they can be driven by the SysClk (12/13/19.2) or by
  * 32KHz clk, or from external sig. This rate is divided by a local divisor.
@@ -230,9 +230,9 @@
 #define V_PVT                    7  /* use with 12MHz/128 */
 #endif
 
-#define CFG_TIMERBASE            OMAP2420_GPT2
-#define CFG_PVT                  V_PVT  /* 2^(pvt+1) */
-#define CFG_HZ	                 ((CONFIG_SYS_CLK_FREQ)/(2 << CFG_PVT))
+#define CONFIG_SYS_TIMERBASE            OMAP2420_GPT2
+#define CONFIG_SYS_PVT                  V_PVT  /* 2^(pvt+1) */
+#define CONFIG_SYS_HZ	                 ((CONFIG_SYS_CLK_FREQ)/(2 << CONFIG_SYS_PVT))
 
 /*-----------------------------------------------------------------------
  * Stack sizes
@@ -262,36 +262,36 @@
 /*-----------------------------------------------------------------------
  * FLASH and environment organization
  */
-#define CFG_FLASH_BASE           PHYS_FLASH_1
-#define CFG_MAX_FLASH_BANKS      2           /* max number of memory banks */
-#define CFG_MAX_FLASH_SECT       (259)	     /* max number of sectors on one chip */
-#define CFG_MONITOR_BASE	CFG_FLASH_BASE /* Monitor at beginning of flash */
-#define CFG_MONITOR_LEN		SZ_128K      /* Reserve 1 sector */
-#define CFG_FLASH_BANKS_LIST	{ CFG_FLASH_BASE, CFG_FLASH_BASE + PHYS_FLASH_SIZE_1 }
-
-#ifdef CFG_NAND_BOOT
-#define CFG_ENV_IS_IN_NAND	1
-#define CFG_ENV_OFFSET	0x80000	/* environment starts here  */
+#define CONFIG_SYS_FLASH_BASE           PHYS_FLASH_1
+#define CONFIG_SYS_MAX_FLASH_BANKS      2           /* max number of memory banks */
+#define CONFIG_SYS_MAX_FLASH_SECT       (259)	     /* max number of sectors on one chip */
+#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_FLASH_BASE /* Monitor at beginning of flash */
+#define CONFIG_SYS_MONITOR_LEN		SZ_128K      /* Reserve 1 sector */
+#define CONFIG_SYS_FLASH_BANKS_LIST	{ CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE + PHYS_FLASH_SIZE_1 }
+
+#ifdef CONFIG_SYS_NAND_BOOT
+#define CONFIG_ENV_IS_IN_NAND	1
+#define CONFIG_ENV_OFFSET	0x80000	/* environment starts here  */
 #else
-#define CFG_ENV_ADDR             (CFG_FLASH_BASE + SZ_128K)
-#define	CFG_ENV_IS_IN_FLASH      1
-#define CFG_ENV_SECT_SIZE	PHYS_FLASH_SECT_SIZE
-#define CFG_ENV_OFFSET	( CFG_MONITOR_BASE + CFG_MONITOR_LEN ) /* Environment after Monitor */
+#define CONFIG_ENV_ADDR             (CONFIG_SYS_FLASH_BASE + SZ_128K)
+#define	CONFIG_ENV_IS_IN_FLASH      1
+#define CONFIG_ENV_SECT_SIZE	PHYS_FLASH_SECT_SIZE
+#define CONFIG_ENV_OFFSET	( CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN ) /* Environment after Monitor */
 #endif
 
 /*-----------------------------------------------------------------------
  * CFI FLASH driver setup
  */
-#define CFG_FLASH_CFI		1	/* Flash memory is CFI compliant */
+#define CONFIG_SYS_FLASH_CFI		1	/* Flash memory is CFI compliant */
 #define CONFIG_FLASH_CFI_DRIVER	1	/* Use drivers/mtd/cfi_flash.c */
-#define CFG_FLASH_USE_BUFFER_WRITE 1	/* Use buffered writes (~10x faster) */
-#define CFG_FLASH_PROTECTION	1	/* Use hardware sector protection */
+#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1	/* Use buffered writes (~10x faster) */
+#define CONFIG_SYS_FLASH_PROTECTION	1	/* Use hardware sector protection */
 
 /* timeout values are in ticks */
-#define CFG_FLASH_ERASE_TOUT     (100*CFG_HZ) /* Timeout for Flash Erase */
-#define CFG_FLASH_WRITE_TOUT     (100*CFG_HZ) /* Timeout for Flash Write */
+#define CONFIG_SYS_FLASH_ERASE_TOUT     (100*CONFIG_SYS_HZ) /* Timeout for Flash Erase */
+#define CONFIG_SYS_FLASH_WRITE_TOUT     (100*CONFIG_SYS_HZ) /* Timeout for Flash Write */
 
-#define CFG_JFFS2_MEM_NAND
+#define CONFIG_SYS_JFFS2_MEM_NAND
 
 /*
  * JFFS2 partitions
diff --git a/include/configs/omap5912osk.h b/include/configs/omap5912osk.h
index 1c44ce032..63cd9c6b7 100644
--- a/include/configs/omap5912osk.h
+++ b/include/configs/omap5912osk.h
@@ -53,8 +53,8 @@
 /*
  * Size of malloc() pool
  */
-#define CFG_MALLOC_LEN	(CFG_ENV_SIZE + 128*1024)
-#define CFG_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
+#define CONFIG_SYS_MALLOC_LEN	(CONFIG_ENV_SIZE + 128*1024)
+#define CONFIG_SYS_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
 
 /*
  * Hardware drivers
@@ -68,11 +68,11 @@
 /*
  * NS16550 Configuration
  */
-#define CFG_NS16550
-#define CFG_NS16550_SERIAL
-#define CFG_NS16550_REG_SIZE	(-4)
-#define CFG_NS16550_CLK	(48000000)	/* can be 12M/32Khz or 48Mhz */
-#define CFG_NS16550_COM1	0xfffb0000	/* uart1, bluetooth uart
+#define CONFIG_SYS_NS16550
+#define CONFIG_SYS_NS16550_SERIAL
+#define CONFIG_SYS_NS16550_REG_SIZE	(-4)
+#define CONFIG_SYS_NS16550_CLK	(48000000)	/* can be 12M/32Khz or 48Mhz */
+#define CONFIG_SYS_NS16550_COM1	0xfffb0000	/* uart1, bluetooth uart
 						on helen */
 
 /*
@@ -84,7 +84,7 @@
 #define CONFIG_ENV_OVERWRITE
 #define CONFIG_CONS_INDEX	1
 #define CONFIG_BAUDRATE	115200
-#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
 
 
 /*
@@ -123,27 +123,27 @@
 /*
  * Miscellaneous configurable options
  */
-#define CFG_LONGHELP	/* undef to save memory     */
-#define CFG_PROMPT	"OMAP5912 OSK # "	/* Monitor Command Prompt   */
-#define CFG_CBSIZE	256		/* Console I/O Buffer Size  */
+#define CONFIG_SYS_LONGHELP	/* undef to save memory     */
+#define CONFIG_SYS_PROMPT	"OMAP5912 OSK # "	/* Monitor Command Prompt   */
+#define CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size  */
 /* Print Buffer Size */
-#define CFG_PBSIZE	(CFG_CBSIZE+sizeof(CFG_PROMPT)+16)
-#define CFG_MAXARGS	16		/* max number of command args   */
-#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size    */
+#define CONFIG_SYS_PBSIZE	(CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
+#define CONFIG_SYS_MAXARGS	16		/* max number of command args   */
+#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size    */
 
-#define CFG_MEMTEST_START	0x10000000	/* memtest works on */
-#define CFG_MEMTEST_END	0x12000000	/* 32 MB in DRAM    */
+#define CONFIG_SYS_MEMTEST_START	0x10000000	/* memtest works on */
+#define CONFIG_SYS_MEMTEST_END	0x12000000	/* 32 MB in DRAM    */
 
-#undef	CFG_CLKS_IN_HZ		/* everything, incl board info, in Hz */
+#undef	CONFIG_SYS_CLKS_IN_HZ		/* everything, incl board info, in Hz */
 
-#define CFG_LOAD_ADDR	0x10000000	/* default load address */
+#define CONFIG_SYS_LOAD_ADDR	0x10000000	/* default load address */
 
 /* The 1610 has 6 timers, they can be driven by the RefClk (12Mhz) or by
  * DPLL1. This time is further subdivided by a local divisor.
  */
-#define CFG_TIMERBASE	0xFFFEC500	/* use timer 1 */
-#define CFG_PVT	7	/* 2^(pvt+1), divide by 256 */
-#define CFG_HZ	((CONFIG_SYS_CLK_FREQ)/(2 << CFG_PVT))
+#define CONFIG_SYS_TIMERBASE	0xFFFEC500	/* use timer 1 */
+#define CONFIG_SYS_PVT	7	/* 2^(pvt+1), divide by 256 */
+#define CONFIG_SYS_HZ	((CONFIG_SYS_CLK_FREQ)/(2 << CONFIG_SYS_PVT))
 
 /*-----------------------------------------------------------------------
  * Stack sizes
@@ -166,39 +166,39 @@
 #define PHYS_FLASH_1		0x00000000	/* Flash Bank #1 */
 #define PHYS_FLASH_2		0x01000000	/* Flash Bank #2 */
 
-#define CFG_FLASH_BASE		PHYS_FLASH_1
+#define CONFIG_SYS_FLASH_BASE		PHYS_FLASH_1
 
-#define CFG_MONITOR_BASE       CFG_FLASH_BASE  /* Monitor at beginning of flash */
+#define CONFIG_SYS_MONITOR_BASE       CONFIG_SYS_FLASH_BASE  /* Monitor at beginning of flash */
 
 /*-----------------------------------------------------------------------
  * FLASH driver setup
  */
-#define CFG_FLASH_CFI          1       /* Flash memory is CFI compliant */
+#define CONFIG_SYS_FLASH_CFI          1       /* Flash memory is CFI compliant */
 #define CONFIG_FLASH_CFI_DRIVER   1       /* Use drivers/mtd/cfi_flash.c */
 
-#define CFG_FLASH_BANKS_LIST { PHYS_FLASH_1, PHYS_FLASH_2 }
+#define CONFIG_SYS_FLASH_BANKS_LIST { PHYS_FLASH_1, PHYS_FLASH_2 }
 
-#define CFG_MAX_FLASH_BANKS	2	/* max number of memory banks */
+#define CONFIG_SYS_MAX_FLASH_BANKS	2	/* max number of memory banks */
 #define PHYS_FLASH_SIZE	0x02000000	/* 32MB */
-#define CFG_MAX_FLASH_SECT	(259)	/* max number of sectors on one chip */
+#define CONFIG_SYS_MAX_FLASH_SECT	(259)	/* max number of sectors on one chip */
 
-#define CFG_FLASH_USE_BUFFER_WRITE     1       /* Use buffered writes (~10x faster) */
-#define CFG_FLASH_PROTECTION   1       /* Use hardware sector protection */
+#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE     1       /* Use buffered writes (~10x faster) */
+#define CONFIG_SYS_FLASH_PROTECTION   1       /* Use hardware sector protection */
 
-#define CFG_FLASH_EMPTY_INFO		/* print 'E' for empty sector on flinfo */
+#define CONFIG_SYS_FLASH_EMPTY_INFO		/* print 'E' for empty sector on flinfo */
 
 /* timeout values are in ticks */
-#define CFG_FLASH_ERASE_TOUT	(20*CFG_HZ)	/* Timeout for Flash Erase */
-#define CFG_FLASH_WRITE_TOUT	(20*CFG_HZ)	/* Timeout for Flash Write */
+#define CONFIG_SYS_FLASH_ERASE_TOUT	(20*CONFIG_SYS_HZ)	/* Timeout for Flash Erase */
+#define CONFIG_SYS_FLASH_WRITE_TOUT	(20*CONFIG_SYS_HZ)	/* Timeout for Flash Write */
 
 /*-----------------------------------------------------------------------
  * FLASH and environment organization
  */
-#define CFG_ENV_IS_IN_FLASH	1
+#define CONFIG_ENV_IS_IN_FLASH	1
 /* addr of environment */
-#define CFG_ENV_ADDR	(CFG_FLASH_BASE + 0x020000)
+#define CONFIG_ENV_ADDR	(CONFIG_SYS_FLASH_BASE + 0x020000)
 
-#define CFG_ENV_SIZE	0x20000	/* Total Size of Environment Sector */
-#define CFG_ENV_OFFSET	0x20000	/* environment starts here  */
+#define CONFIG_ENV_SIZE	0x20000	/* Total Size of Environment Sector */
+#define CONFIG_ENV_OFFSET	0x20000	/* environment starts here  */
 
 #endif							/* __CONFIG_H */
diff --git a/include/configs/omap730.h b/include/configs/omap730.h
index 03abcb312..04d51446e 100644
--- a/include/configs/omap730.h
+++ b/include/configs/omap730.h
@@ -150,7 +150,7 @@
 /* MPU_CNTL_TIMER register bits */
 #define MPUTIM_FREE               (1<<6)
 #define MPUTIM_CLOCK_ENABLE       (1<<5)
-#define MPUTIM_PTV_MASK           (0x7<<PTV_BIT)
+#define MPUTIM_PTV_MASK           (0x7<<MPUTIM_PTV_BIT)
 #define MPUTIM_PTV_BIT            2
 #define MPUTIM_AR                 (1<<1)
 #define MPUTIM_ST                 (1<<0)
diff --git a/include/configs/omap730p2.h b/include/configs/omap730p2.h
index c4d253af4..166d592cc 100644
--- a/include/configs/omap730p2.h
+++ b/include/configs/omap730p2.h
@@ -58,8 +58,8 @@
  * Size of malloc() pool
  */
 
-#define CFG_MALLOC_LEN		   (CFG_ENV_SIZE + 128*1024)
-#define CFG_GBL_DATA_SIZE	   128	     /* size in bytes reserved for initial data */
+#define CONFIG_SYS_MALLOC_LEN		   (CONFIG_ENV_SIZE + 128*1024)
+#define CONFIG_SYS_GBL_DATA_SIZE	   128	     /* size in bytes reserved for initial data */
 
 /*
  * Hardware drivers
@@ -73,11 +73,11 @@
  * NS16550 Configuration
  */
 
-#define CFG_NS16550
-#define CFG_NS16550_SERIAL
-#define CFG_NS16550_REG_SIZE	   (1)
-#define CFG_NS16550_CLK		   (48000000)	  /* can be 12M/32Khz or 48Mhz */
-#define CFG_NS16550_COM1	   0xfffb0000	  /* uart1, bluetooth uart
+#define CONFIG_SYS_NS16550
+#define CONFIG_SYS_NS16550_SERIAL
+#define CONFIG_SYS_NS16550_REG_SIZE	   (1)
+#define CONFIG_SYS_NS16550_CLK		   (48000000)	  /* can be 12M/32Khz or 48Mhz */
+#define CONFIG_SYS_NS16550_COM1	   0xfffb0000	  /* uart1, bluetooth uart
 						   * on perseus */
 
 /*
@@ -88,7 +88,7 @@
 
 #define CONFIG_CONS_INDEX	   1
 #define CONFIG_BAUDRATE		   115200
-#define CFG_BAUDRATE_TABLE	   { 9600, 19200, 38400, 57600, 115200 }
+#define CONFIG_SYS_BAUDRATE_TABLE	   { 9600, 19200, 38400, 57600, 115200 }
 
 
 /*
@@ -131,29 +131,29 @@
  * Miscellaneous configurable options
  */
 
-#define CFG_LONGHELP				       /* undef to save memory	   */
-#define CFG_PROMPT		   "OMAP730 P2 # "     /* Monitor Command Prompt   */
-#define CFG_CBSIZE		   256		       /* Console I/O Buffer Size  */
+#define CONFIG_SYS_LONGHELP				       /* undef to save memory	   */
+#define CONFIG_SYS_PROMPT		   "OMAP730 P2 # "     /* Monitor Command Prompt   */
+#define CONFIG_SYS_CBSIZE		   256		       /* Console I/O Buffer Size  */
 /* Print Buffer Size */
-#define CFG_PBSIZE		   (CFG_CBSIZE+sizeof(CFG_PROMPT)+16)
-#define CFG_MAXARGS		   16		       /* max number of command args   */
-#define CFG_BARGSIZE		   CFG_CBSIZE	       /* Boot Argument Buffer Size    */
+#define CONFIG_SYS_PBSIZE		   (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
+#define CONFIG_SYS_MAXARGS		   16		       /* max number of command args   */
+#define CONFIG_SYS_BARGSIZE		   CONFIG_SYS_CBSIZE	       /* Boot Argument Buffer Size    */
 
-#define CFG_MEMTEST_START	   0x10000000	       /* memtest works on */
-#define CFG_MEMTEST_END		   0x12000000	       /* 32 MB in DRAM	   */
+#define CONFIG_SYS_MEMTEST_START	   0x10000000	       /* memtest works on */
+#define CONFIG_SYS_MEMTEST_END		   0x12000000	       /* 32 MB in DRAM	   */
 
-#undef CFG_CLKS_IN_HZ		     /* everything, incl board info, in Hz */
+#undef CONFIG_SYS_CLKS_IN_HZ		     /* everything, incl board info, in Hz */
 
-#define CFG_LOAD_ADDR		   0x10000000	       /* default load address */
+#define CONFIG_SYS_LOAD_ADDR		   0x10000000	       /* default load address */
 
 /* The OMAP730 has 3 general purpose MPU timers, they can be driven by
  * the RefClk (12Mhz) or by DPLL1. This time is further subdivided by a
  * local divisor.
  */
 
-#define CFG_TIMERBASE		   0xFFFEC500	       /* use timer 1 */
-#define CFG_PVT			   7		       /* 2^(pvt+1), divide by 256 */
-#define CFG_HZ			   ((CONFIG_SYS_CLK_FREQ)/(2 << CFG_PVT))
+#define CONFIG_SYS_TIMERBASE		   0xFFFEC500	       /* use timer 1 */
+#define CONFIG_SYS_PVT			   7		       /* 2^(pvt+1), divide by 256 */
+#define CONFIG_SYS_HZ			   ((CONFIG_SYS_CLK_FREQ)/(2 << CONFIG_SYS_PVT))
 
 /*-----------------------------------------------------------------------
  * Stack sizes
@@ -183,24 +183,24 @@
 #error Unknown Boot Chip-Select number
 #endif
 
-#define CFG_FLASH_BASE		   PHYS_FLASH_1
+#define CONFIG_SYS_FLASH_BASE		   PHYS_FLASH_1
 
 /*-----------------------------------------------------------------------
  * FLASH and environment organization
  */
 
-#define CFG_MAX_FLASH_BANKS	   1		  /* max number of memory banks */
+#define CONFIG_SYS_MAX_FLASH_BANKS	   1		  /* max number of memory banks */
 #define PHYS_FLASH_SIZE		   0x02000000	  /* 32MB */
-#define CFG_MAX_FLASH_SECT	   (259)	  /* max number of sectors on one chip */
+#define CONFIG_SYS_MAX_FLASH_SECT	   (259)	  /* max number of sectors on one chip */
 /* addr of environment */
-#define CFG_ENV_ADDR		   (CFG_FLASH_BASE + 0x020000)
+#define CONFIG_ENV_ADDR		   (CONFIG_SYS_FLASH_BASE + 0x020000)
 
 /* timeout values are in ticks */
-#define CFG_FLASH_ERASE_TOUT	    (20*CFG_HZ)	  /* Timeout for Flash Erase */
-#define CFG_FLASH_WRITE_TOUT	    (20*CFG_HZ)	  /* Timeout for Flash Write */
+#define CONFIG_SYS_FLASH_ERASE_TOUT	    (20*CONFIG_SYS_HZ)	  /* Timeout for Flash Erase */
+#define CONFIG_SYS_FLASH_WRITE_TOUT	    (20*CONFIG_SYS_HZ)	  /* Timeout for Flash Write */
 
-#define CFG_ENV_IS_IN_FLASH	   1
-#define CFG_ENV_SIZE		   0x20000	  /* Total Size of Environment Sector */
-#define CFG_ENV_OFFSET		   0x20000	  /* environment starts here  */
+#define CONFIG_ENV_IS_IN_FLASH	   1
+#define CONFIG_ENV_SIZE		   0x20000	  /* Total Size of Environment Sector */
+#define CONFIG_ENV_OFFSET		   0x20000	  /* environment starts here  */
 
 #endif	  /* ! __CONFIG_H */
diff --git a/include/configs/p3mx.h b/include/configs/p3mx.h
index 33a94bc2c..5e4d30b8a 100644
--- a/include/configs/p3mx.h
+++ b/include/configs/p3mx.h
@@ -43,21 +43,21 @@
 #if defined (CONFIG_P3M750)
 #define CONFIG_750FX			/* 750GL/GX/FX			*/
 #define CONFIG_HIGH_BATS		/* High BATs supported		*/
-#define CFG_BOARD_NAME		"P3M750"
-#define CFG_BUS_HZ		100000000
-#define CFG_BUS_CLK		CFG_BUS_HZ
-#define CFG_TCLK		100000000
+#define CONFIG_SYS_BOARD_NAME		"P3M750"
+#define CONFIG_SYS_BUS_HZ		100000000
+#define CONFIG_SYS_BUS_CLK		CONFIG_SYS_BUS_HZ
+#define CONFIG_SYS_TCLK		100000000
 #elif defined (CONFIG_P3M7448)
 #define CONFIG_74xx
-#define CFG_BOARD_NAME		"P3M7448"
-#define CFG_BUS_HZ		133333333
-#define CFG_BUS_CLK		CFG_BUS_HZ
-#define CFG_TCLK		133333333
+#define CONFIG_SYS_BOARD_NAME		"P3M7448"
+#define CONFIG_SYS_BUS_HZ		133333333
+#define CONFIG_SYS_BUS_CLK		CONFIG_SYS_BUS_HZ
+#define CONFIG_SYS_TCLK		133333333
 #endif
-#define CFG_GT_DUAL_CPU			/* also for JTAG even with one cpu */
+#define CONFIG_SYS_GT_DUAL_CPU			/* also for JTAG even with one cpu */
 
 /* which initialization functions to call for this board */
-#define CFG_BOARD_ASM_INIT	1
+#define CONFIG_SYS_BOARD_ASM_INIT	1
 #define CONFIG_BOARD_EARLY_INIT_F 1     /* Call board_early_init_f	*/
 #define CONFIG_BOARD_EARLY_INIT_R 1     /* Call board_early_init_f	*/
 #define CONFIG_MISC_INIT_R      1	/* Call misc_init_r()		*/
@@ -66,42 +66,42 @@
  * Base addresses -- Note these are effective addresses where the
  * actual resources get mapped (not physical addresses)
  *----------------------------------------------------------------------*/
-#define CFG_SDRAM_BASE		0x00000000
+#define CONFIG_SYS_SDRAM_BASE		0x00000000
 #ifdef CONFIG_P3M750
-#define CFG_SDRAM1_BASE		0x10000000	/* each 256 MByte	*/
+#define CONFIG_SYS_SDRAM1_BASE		0x10000000	/* each 256 MByte	*/
 #endif
 
-#define CFG_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor */
+#define CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor */
 #if defined (CONFIG_P3M750)
-#define CFG_FLASH_BASE		0xff800000	/* start of flash banks	*/
-#define CFG_BOOT_SIZE		_8M		/* boot flash		*/
+#define CONFIG_SYS_FLASH_BASE		0xff800000	/* start of flash banks	*/
+#define CONFIG_SYS_BOOT_SIZE		_8M		/* boot flash		*/
 #elif defined (CONFIG_P3M7448)
-#define CFG_FLASH_BASE		0xff000000	/* start of flash banks	*/
-#define CFG_BOOT_SIZE		_16M		/* boot flash		*/
+#define CONFIG_SYS_FLASH_BASE		0xff000000	/* start of flash banks	*/
+#define CONFIG_SYS_BOOT_SIZE		_16M		/* boot flash		*/
 #endif
-#define CFG_BOOT_SPACE		CFG_FLASH_BASE	/* BOOT_CS0 flash 0    */
-#define CFG_MONITOR_BASE	0xfff00000
-#define CFG_RESET_ADDRESS	0xfff00100
-#define CFG_MALLOC_LEN		(256 << 10)	/* Reserve 256 kB for malloc */
-#define CFG_MISC_REGION_BASE	0xf0000000
+#define CONFIG_SYS_BOOT_SPACE		CONFIG_SYS_FLASH_BASE	/* BOOT_CS0 flash 0    */
+#define CONFIG_SYS_MONITOR_BASE	0xfff00000
+#define CONFIG_SYS_RESET_ADDRESS	0xfff00100
+#define CONFIG_SYS_MALLOC_LEN		(256 << 10)	/* Reserve 256 kB for malloc */
+#define CONFIG_SYS_MISC_REGION_BASE	0xf0000000
 
-#define CFG_DFL_GT_REGS		0xf1000000	/* boot time GT_REGS */
-#define CFG_GT_REGS		0xf1000000	/* GT Registers are mapped here */
-#define CFG_INT_SRAM_BASE	0x42000000	/* GT offers 256k internal SRAM */
+#define CONFIG_SYS_DFL_GT_REGS		0xf1000000	/* boot time GT_REGS */
+#define CONFIG_SYS_GT_REGS		0xf1000000	/* GT Registers are mapped here */
+#define CONFIG_SYS_INT_SRAM_BASE	0x42000000	/* GT offers 256k internal SRAM */
 
 /*-----------------------------------------------------------------------
  * Initial RAM & stack pointer (placed in internal SRAM)
  *----------------------------------------------------------------------*/
  /*
- * When locking data in cache you should point the CFG_INIT_RAM_ADDRESS
+ * When locking data in cache you should point the CONFIG_SYS_INIT_RAM_ADDRESS
  * To an unused memory region. The stack will remain in cache until RAM
  * is initialized
 */
-#undef	CFG_INIT_RAM_LOCK
-#define CFG_INIT_RAM_ADDR	0x42000000
-#define CFG_INIT_RAM_END	0x1000
-#define CFG_GBL_DATA_SIZE	128  /* size in bytes reserved for init data */
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#undef	CONFIG_SYS_INIT_RAM_LOCK
+#define CONFIG_SYS_INIT_RAM_ADDR	0x42000000
+#define CONFIG_SYS_INIT_RAM_END	0x1000
+#define CONFIG_SYS_GBL_DATA_SIZE	128  /* size in bytes reserved for init data */
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
 
 
 /*-----------------------------------------------------------------------
@@ -110,15 +110,15 @@
 #define CONFIG_MPSC			/* MV64460 Serial		*/
 #define CONFIG_MPSC_PORT	0
 #define CONFIG_BAUDRATE		115200	/* console baudrate		*/
-#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
 #define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
-#define CFG_LOADS_BAUD_CHANGE	1	/* allow baudrate change	*/
+#define CONFIG_SYS_LOADS_BAUD_CHANGE	1	/* allow baudrate change	*/
 
 /*-----------------------------------------------------------------------
  * Ethernet
  *----------------------------------------------------------------------*/
 /* Change the default ethernet port, use this define (options: 0, 1, 2) */
-#define CFG_ETH_PORT		ETH_0
+#define CONFIG_SYS_ETH_PORT		ETH_0
 #define CONFIG_NET_MULTI
 #define MV_ETH_DEVS		2
 #define CONFIG_PHY_RESET        1	/* reset phy upon startup         */
@@ -127,24 +127,24 @@
 /*-----------------------------------------------------------------------
  * FLASH related
  *----------------------------------------------------------------------*/
-#define CFG_FLASH_CFI			/* The flash is CFI compatible		*/
+#define CONFIG_SYS_FLASH_CFI			/* The flash is CFI compatible		*/
 #define CONFIG_FLASH_CFI_DRIVER		/* Use common CFI driver		*/
-#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
-#define CFG_MAX_FLASH_SECT	512	/* max number of sectors on one chip	*/
-#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
-#define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
-#define CFG_FLASH_USE_BUFFER_WRITE 1	/* use buffered writes (20x faster)	*/
-#define CFG_FLASH_PROTECTION	1	/* use hardware flash protection	*/
-#define CFG_FLASH_EMPTY_INFO		/* print 'E' for empty sector on flinfo */
-
-#define CFG_ENV_IS_IN_FLASH     1	/* use FLASH for environment vars	*/
+#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
+#define CONFIG_SYS_MAX_FLASH_SECT	512	/* max number of sectors on one chip	*/
+#define CONFIG_SYS_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
+#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
+#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1	/* use buffered writes (20x faster)	*/
+#define CONFIG_SYS_FLASH_PROTECTION	1	/* use hardware flash protection	*/
+#define CONFIG_SYS_FLASH_EMPTY_INFO		/* print 'E' for empty sector on flinfo */
+
+#define CONFIG_ENV_IS_IN_FLASH     1	/* use FLASH for environment vars	*/
 #if defined (CONFIG_P3M750)
-#define CFG_ENV_SECT_SIZE	0x20000	/* one sector (1 device)		*/
+#define CONFIG_ENV_SECT_SIZE	0x20000	/* one sector (1 device)		*/
 #elif defined (CONFIG_P3M7448)
-#define CFG_ENV_SECT_SIZE	0x40000	/* two sectors (2 devices parallel	*/
+#define CONFIG_ENV_SECT_SIZE	0x40000	/* two sectors (2 devices parallel	*/
 #endif
-#define	CFG_ENV_SIZE		0x2000	/* Total Size of Environment Sector	*/
-#define CFG_ENV_ADDR		(CFG_MONITOR_BASE + CFG_MONITOR_LEN)
+#define	CONFIG_ENV_SIZE		0x2000	/* Total Size of Environment Sector	*/
+#define CONFIG_ENV_ADDR		(CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)
 
 /*-----------------------------------------------------------------------
  * DDR SDRAM
@@ -154,12 +154,12 @@
 /*-----------------------------------------------------------------------
  * I2C
  *----------------------------------------------------------------------*/
-#define CFG_I2C_SPEED		100000		/* I2C speed default	*/
+#define CONFIG_SYS_I2C_SPEED		100000		/* I2C speed default	*/
 
 /* I2C RTC */
 #define CONFIG_RTC_M41T11	1
-#define CFG_I2C_RTC_ADDR	0x68
-#define CFG_M41T11_BASE_YEAR	1900	/* play along with linux	*/
+#define CONFIG_SYS_I2C_RTC_ADDR	0x68
+#define CONFIG_SYS_M41T11_BASE_YEAR	1900	/* play along with linux	*/
 
 /*-----------------------------------------------------------------------
  * PCI stuff
@@ -176,27 +176,27 @@
 #endif /* CONFIG_PCI */
 
 /* PCI MEMORY MAP section */
-#define CFG_PCI0_MEM_BASE	0x80000000
-#define CFG_PCI0_MEM_SIZE	_128M
-#define CFG_PCI1_MEM_BASE	0x88000000
-#define CFG_PCI1_MEM_SIZE	_128M
+#define CONFIG_SYS_PCI0_MEM_BASE	0x80000000
+#define CONFIG_SYS_PCI0_MEM_SIZE	_128M
+#define CONFIG_SYS_PCI1_MEM_BASE	0x88000000
+#define CONFIG_SYS_PCI1_MEM_SIZE	_128M
 
-#define CFG_PCI0_0_MEM_SPACE	(CFG_PCI0_MEM_BASE)
-#define CFG_PCI1_0_MEM_SPACE	(CFG_PCI1_MEM_BASE)
+#define CONFIG_SYS_PCI0_0_MEM_SPACE	(CONFIG_SYS_PCI0_MEM_BASE)
+#define CONFIG_SYS_PCI1_0_MEM_SPACE	(CONFIG_SYS_PCI1_MEM_BASE)
 
 /* PCI I/O MAP section */
-#define CFG_PCI0_IO_BASE	0xfa000000
-#define CFG_PCI0_IO_SIZE	_16M
-#define CFG_PCI1_IO_BASE	0xfb000000
-#define CFG_PCI1_IO_SIZE	_16M
+#define CONFIG_SYS_PCI0_IO_BASE	0xfa000000
+#define CONFIG_SYS_PCI0_IO_SIZE	_16M
+#define CONFIG_SYS_PCI1_IO_BASE	0xfb000000
+#define CONFIG_SYS_PCI1_IO_SIZE	_16M
 
-#define CFG_PCI0_IO_SPACE	(CFG_PCI0_IO_BASE)
-#define CFG_PCI0_IO_SPACE_PCI	0x00000000
-#define CFG_PCI1_IO_SPACE	(CFG_PCI1_IO_BASE)
-#define CFG_PCI1_IO_SPACE_PCI	0x00000000
+#define CONFIG_SYS_PCI0_IO_SPACE	(CONFIG_SYS_PCI0_IO_BASE)
+#define CONFIG_SYS_PCI0_IO_SPACE_PCI	0x00000000
+#define CONFIG_SYS_PCI1_IO_SPACE	(CONFIG_SYS_PCI1_IO_BASE)
+#define CONFIG_SYS_PCI1_IO_SPACE_PCI	0x00000000
 
-#define CFG_ISA_IO_BASE_ADDRESS (CFG_PCI0_IO_BASE)
-#define CFG_PCI_IDSEL 0x30
+#define CONFIG_SYS_ISA_IO_BASE_ADDRESS (CONFIG_SYS_PCI0_IO_BASE)
+#define CONFIG_SYS_PCI_IDSEL 0x30
 
 #undef	CONFIG_BOOTARGS
 #define	CONFIG_EXTRA_ENV_SETTINGS_COMMON				\
@@ -285,26 +285,26 @@
 /*-----------------------------------------------------------------------
  * Miscellaneous configurable options
  *----------------------------------------------------------------------*/
-#define CFG_HUSH_PARSER
-#define CFG_PROMPT_HUSH_PS2	"> "
+#define CONFIG_SYS_HUSH_PARSER
+#define CONFIG_SYS_PROMPT_HUSH_PS2	"> "
 
-#define CFG_LONGHELP			/* undef to save memory		*/
-#define CFG_PROMPT	        "=> "	/* Monitor Command Prompt	*/
+#define CONFIG_SYS_LONGHELP			/* undef to save memory		*/
+#define CONFIG_SYS_PROMPT	        "=> "	/* Monitor Command Prompt	*/
 #if defined(CONFIG_CMD_KGDB)
-#define CFG_CBSIZE	        1024	/* Console I/O Buffer Size	*/
+#define CONFIG_SYS_CBSIZE	        1024	/* Console I/O Buffer Size	*/
 #else
-#define CFG_CBSIZE	        256	/* Console I/O Buffer Size	*/
+#define CONFIG_SYS_CBSIZE	        256	/* Console I/O Buffer Size	*/
 #endif
-#define CFG_PBSIZE              (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define CFG_MAXARGS	        16	/* max number of command args	*/
-#define CFG_BARGSIZE	        CFG_CBSIZE /* Boot Argument Buffer Size	*/
+#define CONFIG_SYS_PBSIZE              (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS	        16	/* max number of command args	*/
+#define CONFIG_SYS_BARGSIZE	        CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size	*/
 
-#define CFG_MEMTEST_START	0x0400000 /* memtest works on	        */
-#define CFG_MEMTEST_END		0x0C00000 /* 4 ... 12 MB in DRAM	*/
+#define CONFIG_SYS_MEMTEST_START	0x0400000 /* memtest works on	        */
+#define CONFIG_SYS_MEMTEST_END		0x0C00000 /* 4 ... 12 MB in DRAM	*/
 
-#define CFG_LOAD_ADDR		0x08000000	/* default load address */
+#define CONFIG_SYS_LOAD_ADDR		0x08000000	/* default load address */
 
-#define CFG_HZ		        1000	/* decrementer freq: 1 ms ticks */
+#define CONFIG_SYS_HZ		        1000	/* decrementer freq: 1 ms ticks */
 
 #define CONFIG_CMDLINE_EDITING	1	/* add command line history	*/
 #define CONFIG_LOOPW            1       /* enable loopw command         */
@@ -317,9 +317,9 @@
  *----------------------------------------------------------------------*/
 /* Reset values for Port behavior (8bit/ 32bit, etc.) only corrected device width */
 #if defined (CONFIG_P3M750)
-#define CFG_BOOT_PAR		0x8FDFF87F	/* 16 bit flash, disable burst*/
+#define CONFIG_SYS_BOOT_PAR		0x8FDFF87F	/* 16 bit flash, disable burst*/
 #elif defined (CONFIG_P3M7448)
-#define CFG_BOOT_PAR		0x8FEFFFFF	/* 32 bit flash, burst enabled */
+#define CONFIG_SYS_BOOT_PAR		0x8FEFFFFF	/* 32 bit flash, burst enabled */
 #endif
 
 /*
@@ -356,11 +356,11 @@
  * MPP[30]	Module reset		GPIO	OUT	Board reset
  * MPP[31]	PCI EReady		GPIO	IN	Connected to P12
  */
-#define CFG_MPP_CONTROL_0	0x00303022
-#define CFG_MPP_CONTROL_1	0x00000000
-#define CFG_MPP_CONTROL_2	0x00004000
-#define CFG_MPP_CONTROL_3	0x00000004
-#define CFG_GPP_LEVEL_CONTROL	0x280730D0
+#define CONFIG_SYS_MPP_CONTROL_0	0x00303022
+#define CONFIG_SYS_MPP_CONTROL_1	0x00000000
+#define CONFIG_SYS_MPP_CONTROL_2	0x00004000
+#define CONFIG_SYS_MPP_CONTROL_3	0x00000004
+#define CONFIG_SYS_GPP_LEVEL_CONTROL	0x280730D0
 
 /*----------------------------------------------------------------------
  * Initial BAT mappings
@@ -371,75 +371,75 @@
  * 2) CACHEINHIBIT and WRITETHROUGH not allowed together in same BAT
  */
 /* SDRAM */
-#define CFG_IBAT0L (CFG_SDRAM_BASE | BATL_PP_RW | BATL_CACHEINHIBIT)
-#define CFG_IBAT0U (CFG_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
-#define CFG_DBAT0L (CFG_SDRAM_BASE | BATL_PP_RW | BATL_GUARDEDSTORAGE | BATL_CACHEINHIBIT)
-#define CFG_DBAT0U CFG_IBAT0U
+#define CONFIG_SYS_IBAT0L (CONFIG_SYS_SDRAM_BASE | BATL_PP_RW | BATL_CACHEINHIBIT)
+#define CONFIG_SYS_IBAT0U (CONFIG_SYS_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CONFIG_SYS_DBAT0L (CONFIG_SYS_SDRAM_BASE | BATL_PP_RW | BATL_GUARDEDSTORAGE | BATL_CACHEINHIBIT)
+#define CONFIG_SYS_DBAT0U CONFIG_SYS_IBAT0U
 
 /* init ram */
-#define CFG_IBAT1L  (CFG_INIT_RAM_ADDR | BATL_PP_RW | BATL_MEMCOHERENCE)
-#define CFG_IBAT1U  (CFG_INIT_RAM_ADDR | BATU_BL_256K | BATU_VS | BATU_VP)
-#define CFG_DBAT1L  CFG_IBAT1L
-#define CFG_DBAT1U  CFG_IBAT1U
+#define CONFIG_SYS_IBAT1L  (CONFIG_SYS_INIT_RAM_ADDR | BATL_PP_RW | BATL_MEMCOHERENCE)
+#define CONFIG_SYS_IBAT1U  (CONFIG_SYS_INIT_RAM_ADDR | BATU_BL_256K | BATU_VS | BATU_VP)
+#define CONFIG_SYS_DBAT1L  CONFIG_SYS_IBAT1L
+#define CONFIG_SYS_DBAT1U  CONFIG_SYS_IBAT1U
 
 /* PCI0, PCI1 in one BAT */
-#define CFG_IBAT2L BATL_NO_ACCESS
-#define CFG_IBAT2U CFG_DBAT2U
-#define CFG_DBAT2L (CFG_PCI0_MEM_BASE | BATL_CACHEINHIBIT | BATL_PP_RW | BATL_GUARDEDSTORAGE)
-#define CFG_DBAT2U (CFG_PCI0_MEM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CONFIG_SYS_IBAT2L BATL_NO_ACCESS
+#define CONFIG_SYS_IBAT2U CONFIG_SYS_DBAT2U
+#define CONFIG_SYS_DBAT2L (CONFIG_SYS_PCI0_MEM_BASE | BATL_CACHEINHIBIT | BATL_PP_RW | BATL_GUARDEDSTORAGE)
+#define CONFIG_SYS_DBAT2U (CONFIG_SYS_PCI0_MEM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
 
 /* GT regs, bootrom, all the devices, PCI I/O */
-#define CFG_IBAT3L (CFG_MISC_REGION_BASE | BATL_CACHEINHIBIT | BATL_PP_RW)
-#define CFG_IBAT3U (CFG_MISC_REGION_BASE | BATU_VS | BATU_VP | BATU_BL_256M)
-#define CFG_DBAT3L (CFG_MISC_REGION_BASE | BATL_CACHEINHIBIT | BATL_PP_RW | BATL_GUARDEDSTORAGE)
-#define CFG_DBAT3U CFG_IBAT3U
+#define CONFIG_SYS_IBAT3L (CONFIG_SYS_MISC_REGION_BASE | BATL_CACHEINHIBIT | BATL_PP_RW)
+#define CONFIG_SYS_IBAT3U (CONFIG_SYS_MISC_REGION_BASE | BATU_VS | BATU_VP | BATU_BL_256M)
+#define CONFIG_SYS_DBAT3L (CONFIG_SYS_MISC_REGION_BASE | BATL_CACHEINHIBIT | BATL_PP_RW | BATL_GUARDEDSTORAGE)
+#define CONFIG_SYS_DBAT3U CONFIG_SYS_IBAT3U
 
-#define CFG_IBAT4L (CFG_SDRAM1_BASE | BATL_PP_RW | BATL_CACHEINHIBIT)
-#define CFG_IBAT4U (CFG_SDRAM1_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
-#define CFG_DBAT4L (CFG_SDRAM1_BASE | BATL_PP_RW | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
-#define CFG_DBAT4U CFG_IBAT4U
+#define CONFIG_SYS_IBAT4L (CONFIG_SYS_SDRAM1_BASE | BATL_PP_RW | BATL_CACHEINHIBIT)
+#define CONFIG_SYS_IBAT4U (CONFIG_SYS_SDRAM1_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CONFIG_SYS_DBAT4L (CONFIG_SYS_SDRAM1_BASE | BATL_PP_RW | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
+#define CONFIG_SYS_DBAT4U CONFIG_SYS_IBAT4U
 
 /* set rest out of range for Linux !!!!!!!!!!! */
 
 /* IBAT5 and DBAT5 */
-#define CFG_IBAT5L (0x20000000 | BATL_PP_RW | BATL_CACHEINHIBIT)
-#define CFG_IBAT5U (0x20000000 | BATU_BL_256M | BATU_VS | BATU_VP)
-#define CFG_DBAT5L (0x20000000 | BATL_PP_RW | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
-#define CFG_DBAT5U CFG_IBAT5U
+#define CONFIG_SYS_IBAT5L (0x20000000 | BATL_PP_RW | BATL_CACHEINHIBIT)
+#define CONFIG_SYS_IBAT5U (0x20000000 | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CONFIG_SYS_DBAT5L (0x20000000 | BATL_PP_RW | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
+#define CONFIG_SYS_DBAT5U CONFIG_SYS_IBAT5U
 
 /* IBAT6 and DBAT6 */
-#define CFG_IBAT6L (0x20000000 | BATL_PP_RW | BATL_CACHEINHIBIT)
-#define CFG_IBAT6U (0x20000000 | BATU_BL_256M | BATU_VS | BATU_VP)
-#define CFG_DBAT6L (0x20000000 | BATL_PP_RW | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
-#define CFG_DBAT6U CFG_IBAT6U
+#define CONFIG_SYS_IBAT6L (0x20000000 | BATL_PP_RW | BATL_CACHEINHIBIT)
+#define CONFIG_SYS_IBAT6U (0x20000000 | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CONFIG_SYS_DBAT6L (0x20000000 | BATL_PP_RW | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
+#define CONFIG_SYS_DBAT6U CONFIG_SYS_IBAT6U
 
 /* IBAT7 and DBAT7 */
-#define CFG_IBAT7L (0x20000000 | BATL_PP_RW | BATL_CACHEINHIBIT)
-#define CFG_IBAT7U (0x20000000 | BATU_BL_256M | BATU_VS | BATU_VP)
-#define CFG_DBAT7L (0x20000000 | BATL_PP_RW | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
-#define CFG_DBAT7U CFG_IBAT7U
+#define CONFIG_SYS_IBAT7L (0x20000000 | BATL_PP_RW | BATL_CACHEINHIBIT)
+#define CONFIG_SYS_IBAT7U (0x20000000 | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CONFIG_SYS_DBAT7L (0x20000000 | BATL_PP_RW | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
+#define CONFIG_SYS_DBAT7U CONFIG_SYS_IBAT7U
 
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define CFG_BOOTMAPSZ		(8<<20) /* Initial Memory map for Linux */
-#define CFG_VXWORKS_MAC_PTR	0x42010000 /* use some memory in SRAM that's not used!!! */
+#define CONFIG_SYS_BOOTMAPSZ		(8<<20) /* Initial Memory map for Linux */
+#define CONFIG_SYS_VXWORKS_MAC_PTR	0x42010000 /* use some memory in SRAM that's not used!!! */
 
 /*-----------------------------------------------------------------------
  * Cache Configuration
  */
-#define CFG_CACHELINE_SIZE	32	/* For all MPC74xx CPUs		 */
+#define CONFIG_SYS_CACHELINE_SIZE	32	/* For all MPC74xx CPUs		 */
 #if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value */
+#define CONFIG_SYS_CACHELINE_SHIFT	5	/* log base 2 of the above value */
 #endif
 
 /*-----------------------------------------------------------------------
  * L2CR setup -- make sure this is right for your board!
  * look in include/mpc74xx.h for the defines used here
  */
-#define CFG_L2
+#define CONFIG_SYS_L2
 
 #if defined (CONFIG_750CX) || defined (CONFIG_750FX)
 #define L2_INIT 0
diff --git a/include/configs/p3p440.h b/include/configs/p3p440.h
index ac0d83ac1..729ca6ac7 100644
--- a/include/configs/p3p440.h
+++ b/include/configs/p3p440.h
@@ -45,45 +45,45 @@
  * Base addresses -- Note these are effective addresses where the
  * actual resources get mapped (not physical addresses)
  *----------------------------------------------------------------------*/
-#define CFG_SDRAM_BASE	    0x00000000	    /* _must_ be 0		*/
-#define CFG_FLASH_BASE	    0xff800000	    /* start of FLASH		*/
-#define CFG_MONITOR_BASE    0xfffc0000	    /* start of monitor		*/
-#define CFG_PCI_MEMBASE	    0x80000000	    /* mapped pci memory	*/
-#define CFG_PERIPHERAL_BASE 0xe0000000	    /* internal peripherals	*/
-#define CFG_ISRAM_BASE	    0xc0000000	    /* internal SRAM		*/
-#define CFG_PCI_BASE	    0xd0000000	    /* internal PCI regs	*/
+#define CONFIG_SYS_SDRAM_BASE	    0x00000000	    /* _must_ be 0		*/
+#define CONFIG_SYS_FLASH_BASE	    0xff800000	    /* start of FLASH		*/
+#define CONFIG_SYS_MONITOR_BASE    0xfffc0000	    /* start of monitor		*/
+#define CONFIG_SYS_PCI_MEMBASE	    0x80000000	    /* mapped pci memory	*/
+#define CONFIG_SYS_PERIPHERAL_BASE 0xe0000000	    /* internal peripherals	*/
+#define CONFIG_SYS_ISRAM_BASE	    0xc0000000	    /* internal SRAM		*/
+#define CONFIG_SYS_PCI_BASE	    0xd0000000	    /* internal PCI regs	*/
 
-#define CFG_USB_BASE	    (CFG_PERIPHERAL_BASE + 0x00000000)
+#define CONFIG_SYS_USB_BASE	    (CONFIG_SYS_PERIPHERAL_BASE + 0x00000000)
 
 /*-----------------------------------------------------------------------
  * Initial RAM & stack pointer (placed in internal SRAM)
  *----------------------------------------------------------------------*/
-#define CFG_INIT_RAM_ADDR	CFG_ISRAM_BASE  /* Initial RAM address	*/
-#define CFG_INIT_RAM_END	0x2000	    /* End of used area in RAM	*/
-#define CFG_GBL_DATA_SIZE	128	    /* num bytes initial data	*/
+#define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_ISRAM_BASE  /* Initial RAM address	*/
+#define CONFIG_SYS_INIT_RAM_END	0x2000	    /* End of used area in RAM	*/
+#define CONFIG_SYS_GBL_DATA_SIZE	128	    /* num bytes initial data	*/
 
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
-#define CFG_MONITOR_LEN		(256 * 1024)	/* Reserve 256 kB for Mon*/
-#define CFG_MALLOC_LEN		(128 * 1024)	/* Reserve 128 kB for malloc*/
+#define CONFIG_SYS_MONITOR_LEN		(256 * 1024)	/* Reserve 256 kB for Mon*/
+#define CONFIG_SYS_MALLOC_LEN		(128 * 1024)	/* Reserve 128 kB for malloc*/
 
 /*-----------------------------------------------------------------------
  * DDR SDRAM
  *----------------------------------------------------------------------*/
 #define CONFIG_SDRAM_BANK0	1	/* init onboard DDR SDRAM bank 0*/
 #define CONFIG_SDRAM_ECC		/* enable ECC support		*/
-#define CFG_SDRAM_TABLE	{ \
+#define CONFIG_SYS_SDRAM_TABLE	{ \
 		{(256 << 20), 13, 0x000C4001}, /* 256MB mode 3, 13x10(4)*/ \
 		{(64 << 20),  12, 0x00082001}} /* 64MB mode 2, 12x9(4)	*/
 
 /*-----------------------------------------------------------------------
  * Serial Port
  *----------------------------------------------------------------------*/
-#undef CFG_EXT_SERIAL_CLOCK
+#undef CONFIG_SYS_EXT_SERIAL_CLOCK
 #define CONFIG_BAUDRATE		115200
 
-#define CFG_BAUDRATE_TABLE						\
+#define CONFIG_SYS_BAUDRATE_TABLE						\
 	{ 300, 600, 1200, 2400, 4800, 9600, 19200, 38400,		\
 			57600, 115200, 230400, 460800, 921600 }
 
@@ -92,9 +92,9 @@
  *----------------------------------------------------------------------*/
 #define CONFIG_HARD_I2C		1	/* I2C with hardware support	*/
 #undef	CONFIG_SOFT_I2C			/* I2C bit-banged		*/
-#define CFG_I2C_SPEED		100000	/* I2C speed and slave address	*/
-#define CFG_I2C_SLAVE		0x7F
-#define CFG_I2C_NOPROBES	{0x69}	/* Don't probe these addrs	*/
+#define CONFIG_SYS_I2C_SPEED		100000	/* I2C speed and slave address	*/
+#define CONFIG_SYS_I2C_SLAVE		0x7F
+#define CONFIG_SYS_I2C_NOPROBES	{0x69}	/* Don't probe these addrs	*/
 
 /*-----------------------------------------------------------------------
  * I2C RTC
@@ -104,15 +104,14 @@
 /*-----------------------------------------------------------------------
  * I2C EEPROM (PCF8594C) for environment
  *----------------------------------------------------------------------*/
-#define CFG_I2C_EEPROM_ADDR	0x54	/* EEPROM PCF8594C		*/
-#define CFG_I2C_EEPROM_ADDR_LEN 1	/* Bytes of address		*/
+#define CONFIG_SYS_I2C_EEPROM_ADDR	0x54	/* EEPROM PCF8594C		*/
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1	/* Bytes of address		*/
 /* mask of address bits that overflow into the "EEPROM chip address"	*/
-#define CFG_I2C_EEPROM_ADDR_OVERFLOW	0x07
-#define CFG_EEPROM_PAGE_WRITE_BITS 3	/* The Philips PCF8594C has	*/
+#define CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW	0x07
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3	/* The Philips PCF8594C has	*/
 					/* 8 byte page write mode using */
 					/* last 3 bits of the address	*/
-#define CFG_EEPROM_PAGE_WRITE_DELAY_MS	40   /* and takes up to 40 msec */
-#define CFG_EEPROM_PAGE_WRITE_ENABLE
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	40   /* and takes up to 40 msec */
 
 /*-----------------------------------------------------------------------
  * Default configuration (environment varibles...)
@@ -157,14 +156,15 @@
 #define CONFIG_BAUDRATE		115200
 
 #define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
-#define CFG_LOADS_BAUD_CHANGE	1	/* allow baudrate change	*/
+#define CONFIG_SYS_LOADS_BAUD_CHANGE	1	/* allow baudrate change	*/
 
+#define CONFIG_PPC4xx_EMAC
 #define CONFIG_MII		1	/* MII PHY management		*/
 #define CONFIG_PHY_ADDR		0x1c	/* PHY address			*/
 #define CONFIG_HAS_ETH1
 #define CONFIG_PHY1_ADDR	0x1d	/* EMAC1 PHY address		*/
 #define CONFIG_NET_MULTI	1
-#define CFG_RX_ETH_BUFFER	32	/* Number of ethernet rx buffers & descriptors */
+#define CONFIG_SYS_RX_ETH_BUFFER	32	/* Number of ethernet rx buffers & descriptors */
 
 #define CONFIG_NETCONSOLE		/* include NetConsole support	*/
 
@@ -205,24 +205,24 @@
 /*-----------------------------------------------------------------------
  * Miscellaneous configurable options
  *----------------------------------------------------------------------*/
-#define CFG_LONGHELP			/* undef to save memory		*/
-#define CFG_PROMPT	"=> "		/* Monitor Command Prompt	*/
+#define CONFIG_SYS_LONGHELP			/* undef to save memory		*/
+#define CONFIG_SYS_PROMPT	"=> "		/* Monitor Command Prompt	*/
 #if defined(CONFIG_CMD_KGDB)
-#define CFG_CBSIZE	1024		/* Console I/O Buffer Size	*/
+#define CONFIG_SYS_CBSIZE	1024		/* Console I/O Buffer Size	*/
 #else
-#define CFG_CBSIZE	256		/* Console I/O Buffer Size	*/
+#define CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size	*/
 #endif
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define CFG_MAXARGS	16		/* max number of command args	*/
-#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS	16		/* max number of command args	*/
+#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
 
-#define CFG_MEMTEST_START	0x0400000	/* memtest works on	*/
-#define CFG_MEMTEST_END		0x0C00000	/* 4 ... 12 MB in DRAM	*/
+#define CONFIG_SYS_MEMTEST_START	0x0400000	/* memtest works on	*/
+#define CONFIG_SYS_MEMTEST_END		0x0C00000	/* 4 ... 12 MB in DRAM	*/
 
-#define CFG_LOAD_ADDR		0x100000	/* default load address */
-#define CFG_EXTBDINFO		1	/* To use extended board_into (bd_t) */
+#define CONFIG_SYS_LOAD_ADDR		0x100000	/* default load address */
+#define CONFIG_SYS_EXTBDINFO		1	/* To use extended board_into (bd_t) */
 
-#define CFG_HZ		1000		/* decrementer freq: 1 ms ticks */
+#define CONFIG_SYS_HZ		1000		/* decrementer freq: 1 ms ticks */
 
 #define CONFIG_AUTO_COMPLETE	1       /* add autocompletion support   */
 #define CONFIG_LOOPW            1       /* enable loopw command         */
@@ -236,81 +236,81 @@
 #define CONFIG_PCI			            /* include pci support	        */
 #define CONFIG_PCI_PNP			        /* do pci plug-and-play         */
 #define CONFIG_PCI_SCAN_SHOW            /* show pci devices on startup  */
-#define CFG_PCI_TARGBASE    0x80000000  /* PCIaddr mapped to CFG_PCI_MEMBASE */
+#define CONFIG_SYS_PCI_TARGBASE    0x80000000  /* PCIaddr mapped to CONFIG_SYS_PCI_MEMBASE */
 
 /* Board-specific PCI */
-#define CFG_PCI_TARGET_INIT	            /* let board init pci target    */
+#define CONFIG_SYS_PCI_TARGET_INIT	            /* let board init pci target    */
 
 #define CONFIG_DISABLE_PISE_TEST	/* disable PISE test (PCIX only)*/
 
-#define CFG_PCI_SUBSYS_VENDORID 0x10e8	/* AMCC */
-#define CFG_PCI_SUBSYS_DEVICEID 0xcafe  /* Whatever */
+#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x10e8	/* AMCC */
+#define CONFIG_SYS_PCI_SUBSYS_DEVICEID 0xcafe  /* Whatever */
 
 /*-----------------------------------------------------------------------
  * External Bus Controller (EBC) Setup
  *----------------------------------------------------------------------*/
-#define CFG_FLASH0		0xFF800000
-#define CFG_FLASH1		0xFF000000
-#define CFG_FLASH2		0xFE800000
-#define CFG_FLASH3		0xFE000000
-#define CFG_USB			0xF0000000
+#define CONFIG_SYS_FLASH0		0xFF800000
+#define CONFIG_SYS_FLASH1		0xFF000000
+#define CONFIG_SYS_FLASH2		0xFE800000
+#define CONFIG_SYS_FLASH3		0xFE000000
+#define CONFIG_SYS_USB			0xF0000000
 
 /* Memory Bank 0 (Flash Bank 0, NOR-FLASH) initialization			*/
-#define CFG_EBC_PB0AP		0x03050200
-#define CFG_EBC_PB0CR		(CFG_FLASH0 | 0x7A000) /* BAS=0xFF8,BS=8MB,BU=R/W,BW=16bit */
+#define CONFIG_SYS_EBC_PB0AP		0x03050200
+#define CONFIG_SYS_EBC_PB0CR		(CONFIG_SYS_FLASH0 | 0x7A000) /* BAS=0xFF8,BS=8MB,BU=R/W,BW=16bit */
 
 /* Memory Bank 1 (Flash Bank 1, NOR-FLASH) initialization			*/
-#define CFG_EBC_PB1AP		0x03050200
-#define CFG_EBC_PB1CR		(CFG_FLASH1 | 0x7A000) /* BAS=0xFF8,BS=8MB,BU=R/W,BW=16bit */
+#define CONFIG_SYS_EBC_PB1AP		0x03050200
+#define CONFIG_SYS_EBC_PB1CR		(CONFIG_SYS_FLASH1 | 0x7A000) /* BAS=0xFF8,BS=8MB,BU=R/W,BW=16bit */
 
 /* Memory Bank 2 (Flash Bank 2, NOR-FLASH) initialization			*/
-#define CFG_EBC_PB2AP		0x03050200
-#define CFG_EBC_PB2CR		(CFG_FLASH2 | 0x7A000) /* BAS=0xFF8,BS=8MB,BU=R/W,BW=16bit */
+#define CONFIG_SYS_EBC_PB2AP		0x03050200
+#define CONFIG_SYS_EBC_PB2CR		(CONFIG_SYS_FLASH2 | 0x7A000) /* BAS=0xFF8,BS=8MB,BU=R/W,BW=16bit */
 
 /* Memory Bank 3 (Flash Bank 3, NOR-FLASH) initialization			*/
-#define CFG_EBC_PB3AP		0x03050200
-#define CFG_EBC_PB3CR		(CFG_FLASH3 | 0x7A000) /* BAS=0xFF8,BS=8MB,BU=R/W,BW=16bit */
+#define CONFIG_SYS_EBC_PB3AP		0x03050200
+#define CONFIG_SYS_EBC_PB3CR		(CONFIG_SYS_FLASH3 | 0x7A000) /* BAS=0xFF8,BS=8MB,BU=R/W,BW=16bit */
 
 /* Memory Bank 7 (USB controller) initialization				*/
-#define CFG_EBC_PB7AP		0x02015000
-#define CFG_EBC_PB7CR		(CFG_USB | 0xFE000) /* BAS=0xF00,BS=128MB,BU=R/W,BW=16bit*/
+#define CONFIG_SYS_EBC_PB7AP		0x02015000
+#define CONFIG_SYS_EBC_PB7CR		(CONFIG_SYS_USB | 0xFE000) /* BAS=0xF00,BS=128MB,BU=R/W,BW=16bit*/
 
 /*-----------------------------------------------------------------------
  * FLASH related
  *----------------------------------------------------------------------*/
-#define CFG_FLASH_CFI				/* The flash is CFI compatible	*/
+#define CONFIG_SYS_FLASH_CFI				/* The flash is CFI compatible	*/
 #define CONFIG_FLASH_CFI_DRIVER			/* Use common CFI driver	*/
 
-#define CFG_FLASH_BANKS_LIST { CFG_FLASH3, CFG_FLASH2, CFG_FLASH1, CFG_FLASH0 }
+#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH3, CONFIG_SYS_FLASH2, CONFIG_SYS_FLASH1, CONFIG_SYS_FLASH0 }
 
-#define CFG_MAX_FLASH_BANKS	4	/* max number of memory banks		*/
-#define CFG_MAX_FLASH_SECT	512	/* max number of sectors on one chip	*/
+#define CONFIG_SYS_MAX_FLASH_BANKS	4	/* max number of memory banks		*/
+#define CONFIG_SYS_MAX_FLASH_SECT	512	/* max number of sectors on one chip	*/
 
-#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
-#define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
+#define CONFIG_SYS_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
+#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
 
-#define CFG_FLASH_USE_BUFFER_WRITE 1	/* use buffered writes (20x faster)	*/
-#define CFG_FLASH_PROTECTION	1	/* use hardware flash protection	*/
+#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1	/* use buffered writes (20x faster)	*/
+#define CONFIG_SYS_FLASH_PROTECTION	1	/* use hardware flash protection	*/
 
-#define CFG_FLASH_EMPTY_INFO		/* print 'E' for empty sector on flinfo */
-#define CFG_FLASH_QUIET_TEST	1	/* don't warn upon unknown flash	*/
+#define CONFIG_SYS_FLASH_EMPTY_INFO		/* print 'E' for empty sector on flinfo */
+#define CONFIG_SYS_FLASH_QUIET_TEST	1	/* don't warn upon unknown flash	*/
 
-#define CFG_ENV_IS_IN_FLASH     1	/* use FLASH for environment vars	*/
+#define CONFIG_ENV_IS_IN_FLASH     1	/* use FLASH for environment vars	*/
 
-#define CFG_ENV_SECT_SIZE	0x20000	/* size of one complete sector		*/
-#define CFG_ENV_ADDR		(CFG_MONITOR_BASE-CFG_ENV_SECT_SIZE)
-#define	CFG_ENV_SIZE		0x2000	/* Total Size of Environment Sector	*/
+#define CONFIG_ENV_SECT_SIZE	0x20000	/* size of one complete sector		*/
+#define CONFIG_ENV_ADDR		(CONFIG_SYS_MONITOR_BASE-CONFIG_ENV_SECT_SIZE)
+#define	CONFIG_ENV_SIZE		0x2000	/* Total Size of Environment Sector	*/
 
 /* Address and size of Redundant Environment Sector	*/
-#define CFG_ENV_ADDR_REDUND	(CFG_ENV_ADDR-CFG_ENV_SECT_SIZE)
-#define CFG_ENV_SIZE_REDUND	(CFG_ENV_SIZE)
+#define CONFIG_ENV_ADDR_REDUND	(CONFIG_ENV_ADDR-CONFIG_ENV_SECT_SIZE)
+#define CONFIG_ENV_SIZE_REDUND	(CONFIG_ENV_SIZE)
 
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
+#define CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
 
 /*
  * Internal Definitions
diff --git a/include/configs/pb1x00.h b/include/configs/pb1x00.h
index 2caa64173..7c7bebac3 100644
--- a/include/configs/pb1x00.h
+++ b/include/configs/pb1x00.h
@@ -53,7 +53,7 @@
 #define CONFIG_BAUDRATE		115200
 
 /* valid baudrates */
-#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
 
 #define	CONFIG_TIMESTAMP		/* Print image info with timestamp */
 #undef	CONFIG_BOOTARGS
@@ -71,56 +71,56 @@
 /*
  * Miscellaneous configurable options
  */
-#define	CFG_LONGHELP				/* undef to save memory      */
-#define	CFG_PROMPT		"Pb1x00 # "	/* Monitor Command Prompt    */
-#define	CFG_CBSIZE		256		/* Console I/O Buffer Size   */
-#define	CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16)  /* Print Buffer Size */
-#define	CFG_MAXARGS		16		/* max number of command args*/
+#define	CONFIG_SYS_LONGHELP				/* undef to save memory      */
+#define	CONFIG_SYS_PROMPT		"Pb1x00 # "	/* Monitor Command Prompt    */
+#define	CONFIG_SYS_CBSIZE		256		/* Console I/O Buffer Size   */
+#define	CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)  /* Print Buffer Size */
+#define	CONFIG_SYS_MAXARGS		16		/* max number of command args*/
 
-#define CFG_MALLOC_LEN		128*1024
+#define CONFIG_SYS_MALLOC_LEN		128*1024
 
-#define CFG_BOOTPARAMS_LEN	128*1024
+#define CONFIG_SYS_BOOTPARAMS_LEN	128*1024
 
-#define CFG_MIPS_TIMER_FREQ	396000000
+#define CONFIG_SYS_MIPS_TIMER_FREQ	396000000
 
-#define CFG_HZ			1000
+#define CONFIG_SYS_HZ			1000
 
-#define CFG_SDRAM_BASE		0x80000000     /* Cached addr */
+#define CONFIG_SYS_SDRAM_BASE		0x80000000     /* Cached addr */
 
-#define	CFG_LOAD_ADDR		0x81000000     /* default load address	*/
+#define	CONFIG_SYS_LOAD_ADDR		0x81000000     /* default load address	*/
 
-#define CFG_MEMTEST_START	0x80100000
-#undef CFG_MEMTEST_START
-#define CFG_MEMTEST_START       0x80200000
-#define CFG_MEMTEST_END		0x83800000
+#define CONFIG_SYS_MEMTEST_START	0x80100000
+#undef CONFIG_SYS_MEMTEST_START
+#define CONFIG_SYS_MEMTEST_START       0x80200000
+#define CONFIG_SYS_MEMTEST_END		0x83800000
 
 /*-----------------------------------------------------------------------
  * FLASH and environment organization
  */
-#define CFG_MAX_FLASH_BANKS	2	/* max number of memory banks */
-#define CFG_MAX_FLASH_SECT	(128)	/* max number of sectors on one chip */
+#define CONFIG_SYS_MAX_FLASH_BANKS	2	/* max number of memory banks */
+#define CONFIG_SYS_MAX_FLASH_SECT	(128)	/* max number of sectors on one chip */
 
 #define PHYS_FLASH_1		0xbec00000 /* Flash Bank #1 */
 #define PHYS_FLASH_2		0xbfc00000 /* Flash Bank #2 */
 
 /* The following #defines are needed to get flash environment right */
-#define	CFG_MONITOR_BASE	TEXT_BASE
-#define	CFG_MONITOR_LEN		(192 << 10)
+#define	CONFIG_SYS_MONITOR_BASE	TEXT_BASE
+#define	CONFIG_SYS_MONITOR_LEN		(192 << 10)
 
-#define CFG_INIT_SP_OFFSET	0x4000000
+#define CONFIG_SYS_INIT_SP_OFFSET	0x4000000
 
 /* We boot from this flash, selected with dip switch */
-#define CFG_FLASH_BASE		PHYS_FLASH_2
+#define CONFIG_SYS_FLASH_BASE		PHYS_FLASH_2
 
 /* timeout values are in ticks */
-#define CFG_FLASH_ERASE_TOUT	(2 * CFG_HZ) /* Timeout for Flash Erase */
-#define CFG_FLASH_WRITE_TOUT	(2 * CFG_HZ) /* Timeout for Flash Write */
+#define CONFIG_SYS_FLASH_ERASE_TOUT	(2 * CONFIG_SYS_HZ) /* Timeout for Flash Erase */
+#define CONFIG_SYS_FLASH_WRITE_TOUT	(2 * CONFIG_SYS_HZ) /* Timeout for Flash Write */
 
-#define	CFG_ENV_IS_NOWHERE	1
+#define	CONFIG_ENV_IS_NOWHERE	1
 
 /* Address and size of Primary Environment Sector	*/
-#define CFG_ENV_ADDR		0xB0030000
-#define CFG_ENV_SIZE		0x10000
+#define CONFIG_ENV_ADDR		0xB0030000
+#define CONFIG_ENV_SIZE		0x10000
 
 #define CONFIG_FLASH_16BIT
 
@@ -140,8 +140,8 @@
 
 /*---ATA PCMCIA ------------------------------------*/
 #if 0
-#define CFG_PCMCIA_MEM_SIZE 0x4000000 /* Offset to slot 1 FIXME!!! */
-#define CFG_PCMCIA_MEM_ADDR 0x20000000
+#define CONFIG_SYS_PCMCIA_MEM_SIZE 0x4000000 /* Offset to slot 1 FIXME!!! */
+#define CONFIG_SYS_PCMCIA_MEM_ADDR 0x20000000
 #define CONFIG_PCMCIA_SLOT_A
 
 #define CONFIG_ATAPI 1
@@ -151,32 +151,32 @@
 #define CONFIG_IDE_PCMCIA 1
 
 /* We only support one slot for now */
-#define CFG_IDE_MAXBUS		1	/* max. 1 IDE bus		*/
-#define CFG_IDE_MAXDEVICE	1	/* max. 1 drive per IDE bus	*/
+#define CONFIG_SYS_IDE_MAXBUS		1	/* max. 1 IDE bus		*/
+#define CONFIG_SYS_IDE_MAXDEVICE	1	/* max. 1 drive per IDE bus	*/
 
 #undef	CONFIG_IDE_LED			/* LED   for ide not supported	*/
 #undef	CONFIG_IDE_RESET		/* reset for ide not supported	*/
 
-#define CFG_ATA_IDE0_OFFSET	0x0000
+#define CONFIG_SYS_ATA_IDE0_OFFSET	0x0000
 
-#define CFG_ATA_BASE_ADDR       CFG_PCMCIA_MEM_ADDR
+#define CONFIG_SYS_ATA_BASE_ADDR       CONFIG_SYS_PCMCIA_MEM_ADDR
 
 /* Offset for data I/O			*/
-#define CFG_ATA_DATA_OFFSET     8
+#define CONFIG_SYS_ATA_DATA_OFFSET     8
 
 /* Offset for normal register accesses  */
-#define CFG_ATA_REG_OFFSET      0
+#define CONFIG_SYS_ATA_REG_OFFSET      0
 
 /* Offset for alternate registers       */
-#define CFG_ATA_ALT_OFFSET      0x0100
+#define CONFIG_SYS_ATA_ALT_OFFSET      0x0100
 
 #endif
 /*-----------------------------------------------------------------------
  * Cache Configuration
  */
-#define CFG_DCACHE_SIZE		16384
-#define CFG_ICACHE_SIZE		16384
-#define CFG_CACHELINE_SIZE	32
+#define CONFIG_SYS_DCACHE_SIZE		16384
+#define CONFIG_SYS_ICACHE_SIZE		16384
+#define CONFIG_SYS_CACHELINE_SIZE	32
 
 
 /*
diff --git a/include/configs/pcs440ep.h b/include/configs/pcs440ep.h
index ba6d93224..000ae5cd7 100644
--- a/include/configs/pcs440ep.h
+++ b/include/configs/pcs440ep.h
@@ -49,77 +49,77 @@
  * Base addresses -- Note these are effective addresses where the
  * actual resources get mapped (not physical addresses)
  *----------------------------------------------------------------------*/
-#define CFG_MONITOR_LEN		(384 * 1024)	/* Reserve 384 kB for Monitor	*/
-#define CFG_MALLOC_LEN		(256 * 1024)	/* Reserve 256 kB for malloc()	*/
-#define CFG_MONITOR_BASE	(-CFG_MONITOR_LEN)
-#define CFG_SDRAM_BASE	        0x00000000	    /* _must_ be 0	*/
-#define CFG_FLASH_BASE	        0xfff00000	    /* start of FLASH	*/
-#define CFG_PCI_MEMBASE	        0xa0000000	    /* mapped pci memory*/
-#define CFG_PCI_MEMBASE1        CFG_PCI_MEMBASE  + 0x10000000
-#define CFG_PCI_MEMBASE2        CFG_PCI_MEMBASE1 + 0x10000000
-#define CFG_PCI_MEMBASE3        CFG_PCI_MEMBASE2 + 0x10000000
+#define CONFIG_SYS_MONITOR_LEN		(384 * 1024)	/* Reserve 384 kB for Monitor	*/
+#define CONFIG_SYS_MALLOC_LEN		(256 * 1024)	/* Reserve 256 kB for malloc()	*/
+#define CONFIG_SYS_MONITOR_BASE	(-CONFIG_SYS_MONITOR_LEN)
+#define CONFIG_SYS_SDRAM_BASE	        0x00000000	    /* _must_ be 0	*/
+#define CONFIG_SYS_FLASH_BASE	        0xfff00000	    /* start of FLASH	*/
+#define CONFIG_SYS_PCI_MEMBASE	        0xa0000000	    /* mapped pci memory*/
+#define CONFIG_SYS_PCI_MEMBASE1        CONFIG_SYS_PCI_MEMBASE  + 0x10000000
+#define CONFIG_SYS_PCI_MEMBASE2        CONFIG_SYS_PCI_MEMBASE1 + 0x10000000
+#define CONFIG_SYS_PCI_MEMBASE3        CONFIG_SYS_PCI_MEMBASE2 + 0x10000000
 
 /*Don't change either of these*/
-#define CFG_PERIPHERAL_BASE     0xef600000	    /* internal peripherals*/
-#define CFG_PCI_BASE	        0xe0000000	    /* internal PCI regs*/
+#define CONFIG_SYS_PERIPHERAL_BASE     0xef600000	    /* internal peripherals*/
+#define CONFIG_SYS_PCI_BASE	        0xe0000000	    /* internal PCI regs*/
 /*Don't change either of these*/
 
-#define CFG_USB_DEVICE          0x50000000
-#define CFG_BOOT_BASE_ADDR      0xf0000000
+#define CONFIG_SYS_USB_DEVICE          0x50000000
+#define CONFIG_SYS_BOOT_BASE_ADDR      0xf0000000
 
 /*-----------------------------------------------------------------------
  * Initial RAM & stack pointer (placed in SDRAM)
  *----------------------------------------------------------------------*/
-#define CFG_INIT_RAM_DCACHE	1		/* d-cache as init ram	*/
-#define CFG_INIT_RAM_ADDR	0x70000000		/* DCache       */
-#define CFG_INIT_RAM_END	(4 << 10)
-#define CFG_GBL_DATA_SIZE	256			/* num bytes initial data*/
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_INIT_RAM_DCACHE	1		/* d-cache as init ram	*/
+#define CONFIG_SYS_INIT_RAM_ADDR	0x70000000		/* DCache       */
+#define CONFIG_SYS_INIT_RAM_END	(4 << 10)
+#define CONFIG_SYS_GBL_DATA_SIZE	256			/* num bytes initial data*/
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
 /*-----------------------------------------------------------------------
  * Serial Port
  *----------------------------------------------------------------------*/
-#undef CFG_EXT_SERIAL_CLOCK		/* no external clk used		*/
+#undef CONFIG_SYS_EXT_SERIAL_CLOCK		/* no external clk used		*/
 #define CONFIG_BAUDRATE		115200
 #define CONFIG_SERIAL_MULTI     1
 /*define this if you want console on UART1*/
 #undef CONFIG_UART1_CONSOLE
 
-#define CFG_BAUDRATE_TABLE  \
+#define CONFIG_SYS_BAUDRATE_TABLE  \
     {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
 
 /*-----------------------------------------------------------------------
  * Environment
  *----------------------------------------------------------------------*/
-#define CFG_ENV_IS_IN_FLASH     1	/* use FLASH for environment vars	*/
+#define CONFIG_ENV_IS_IN_FLASH     1	/* use FLASH for environment vars	*/
 
 /*-----------------------------------------------------------------------
  * FLASH related
  *----------------------------------------------------------------------*/
-#define CFG_MAX_FLASH_BANKS	2	/* max number of memory banks		*/
-#define CFG_MAX_FLASH_SECT	256	/* max number of sectors on one chip	*/
+#define CONFIG_SYS_MAX_FLASH_BANKS	2	/* max number of memory banks		*/
+#define CONFIG_SYS_MAX_FLASH_SECT	256	/* max number of sectors on one chip	*/
 
-#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
-#define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
+#define CONFIG_SYS_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
+#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
 
-#define CFG_FLASH_WORD_SIZE	unsigned char	/* flash word size (width)	*/
-#define CFG_FLASH_ADDR0		0x5555	/* 1st address for flash config cycles	*/
-#define CFG_FLASH_ADDR1		0x2AAA	/* 2nd address for flash config cycles	*/
+#define CONFIG_SYS_FLASH_WORD_SIZE	unsigned char	/* flash word size (width)	*/
+#define CONFIG_SYS_FLASH_ADDR0		0x5555	/* 1st address for flash config cycles	*/
+#define CONFIG_SYS_FLASH_ADDR1		0x2AAA	/* 2nd address for flash config cycles	*/
 
-#define CFG_FLASH_EMPTY_INFO		/* print 'E' for empty sector on flinfo */
+#define CONFIG_SYS_FLASH_EMPTY_INFO		/* print 'E' for empty sector on flinfo */
 
-#ifdef CFG_ENV_IS_IN_FLASH
-#define CFG_ENV_SECT_SIZE	0x10000	/* size of one complete sector		*/
-#define CFG_ENV_ADDR		(CFG_MONITOR_BASE-CFG_ENV_SECT_SIZE)
-#define CFG_ENV_SIZE		0x2000	/* Total Size of Environment Sector	*/
+#ifdef CONFIG_ENV_IS_IN_FLASH
+#define CONFIG_ENV_SECT_SIZE	0x10000	/* size of one complete sector		*/
+#define CONFIG_ENV_ADDR		(CONFIG_SYS_MONITOR_BASE-CONFIG_ENV_SECT_SIZE)
+#define CONFIG_ENV_SIZE		0x2000	/* Total Size of Environment Sector	*/
 
 #define CONFIG_ENV_OVERWRITE	1
 
 /* Address and size of Redundant Environment Sector	*/
-#define CFG_ENV_ADDR_REDUND	(CFG_ENV_ADDR-CFG_ENV_SECT_SIZE)
-#define CFG_ENV_SIZE_REDUND	(CFG_ENV_SIZE)
-#endif /* CFG_ENV_IS_IN_FLASH */
+#define CONFIG_ENV_ADDR_REDUND	(CONFIG_ENV_ADDR-CONFIG_ENV_SECT_SIZE)
+#define CONFIG_ENV_SIZE_REDUND	(CONFIG_ENV_SIZE)
+#endif /* CONFIG_ENV_IS_IN_FLASH */
 
 #define ENV_NAME_REVLEV	"revision_level"
 #define ENV_NAME_SOLDER	"solder_switch"
@@ -138,14 +138,13 @@
  *----------------------------------------------------------------------*/
 #define CONFIG_HARD_I2C		1	    /* I2C with hardware support	*/
 #undef	CONFIG_SOFT_I2C			    /* I2C bit-banged		*/
-#define CFG_I2C_SPEED		100000	/* I2C speed and slave address	*/
-#define CFG_I2C_SLAVE		0x7F
+#define CONFIG_SYS_I2C_SPEED		100000	/* I2C speed and slave address	*/
+#define CONFIG_SYS_I2C_SLAVE		0x7F
 
-#define CFG_I2C_EEPROM_ADDR	(0xa4>>1)
-#define CFG_I2C_EEPROM_ADDR_LEN 1
-#define CFG_EEPROM_PAGE_WRITE_ENABLE
-#define CFG_EEPROM_PAGE_WRITE_BITS 3
-#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10
+#define CONFIG_SYS_I2C_EEPROM_ADDR	(0xa4>>1)
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10
 
 #define CONFIG_PREBOOT	"echo;"	\
 	"echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;" \
@@ -190,8 +189,8 @@
 
 /* check U-Boot image with SHA1 sum */
 #define CONFIG_SHA1_CHECK_UB_IMG	1
-#define CONFIG_SHA1_START		CFG_MONITOR_BASE
-#define CONFIG_SHA1_LEN			CFG_MONITOR_LEN
+#define CONFIG_SHA1_START		CONFIG_SYS_MONITOR_BASE
+#define CONFIG_SHA1_LEN			CONFIG_SYS_MONITOR_LEN
 
 /*-----------------------------------------------------------------------
  * Definitions for status LED
@@ -200,16 +199,16 @@
 #define CONFIG_BOARD_SPECIFIC_LED	1
 
 #define STATUS_LED_BIT		0x08			/* DIAG1 is on GPIO_PPC_1 */
-#define STATUS_LED_PERIOD	((CFG_HZ / 2) / 5)	/* blink at 5 Hz */
+#define STATUS_LED_PERIOD	((CONFIG_SYS_HZ / 2) / 5)	/* blink at 5 Hz */
 #define STATUS_LED_STATE	STATUS_LED_OFF
 #define STATUS_LED_BIT1		0x04			/* DIAG2 is on GPIO_PPC_2 */
-#define STATUS_LED_PERIOD1	((CFG_HZ / 2) / 5)	/* blink at 5 Hz */
+#define STATUS_LED_PERIOD1	((CONFIG_SYS_HZ / 2) / 5)	/* blink at 5 Hz */
 #define STATUS_LED_STATE1	STATUS_LED_ON
 #define STATUS_LED_BIT2		0x02			/* DIAG3 is on GPIO_PPC_3 */
-#define STATUS_LED_PERIOD2	((CFG_HZ / 2) / 5)	/* blink at 5 Hz */
+#define STATUS_LED_PERIOD2	((CONFIG_SYS_HZ / 2) / 5)	/* blink at 5 Hz */
 #define STATUS_LED_STATE2	STATUS_LED_OFF
 #define STATUS_LED_BIT3		0x01			/* DIAG4 is on GPIO_PPC_4 */
-#define STATUS_LED_PERIOD3	((CFG_HZ / 2) / 5)	/* blink at 5 Hz */
+#define STATUS_LED_PERIOD3	((CONFIG_SYS_HZ / 2) / 5)	/* blink at 5 Hz */
 #define STATUS_LED_STATE3	STATUS_LED_OFF
 
 #define CONFIG_SHOW_BOOT_PROGRESS	1
@@ -217,15 +216,16 @@
 #define CONFIG_BAUDRATE		115200
 
 #define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
-#define CFG_LOADS_BAUD_CHANGE	1	/* allow baudrate change	*/
+#define CONFIG_SYS_LOADS_BAUD_CHANGE	1	/* allow baudrate change	*/
 
+#define CONFIG_PPC4xx_EMAC
 #define CONFIG_MII		1	/* MII PHY management		*/
 #define CONFIG_NET_MULTI        1	/* required for netconsole      */
 #define CONFIG_HAS_ETH1		1	/* add support for "eth1addr"	*/
 #define CONFIG_PHY_ADDR		1	/* PHY address, See schematics	*/
 #define CONFIG_PHY1_ADDR        2
 
-#define CFG_RX_ETH_BUFFER	32	/* Number of ethernet rx buffers & descriptors */
+#define CONFIG_SYS_RX_ETH_BUFFER	32	/* Number of ethernet rx buffers & descriptors */
 
 #define CONFIG_NETCONSOLE		/* include NetConsole support	*/
 
@@ -288,25 +288,25 @@
 /*
  * Miscellaneous configurable options
  */
-#define CFG_LONGHELP			/* undef to save memory		*/
-#define CFG_PROMPT	        "=> "	/* Monitor Command Prompt	*/
+#define CONFIG_SYS_LONGHELP			/* undef to save memory		*/
+#define CONFIG_SYS_PROMPT	        "=> "	/* Monitor Command Prompt	*/
 #if defined(CONFIG_CMD_KGDB)
-#define CFG_CBSIZE	        1024	/* Console I/O Buffer Size	*/
+#define CONFIG_SYS_CBSIZE	        1024	/* Console I/O Buffer Size	*/
 #else
-#define CFG_CBSIZE	        256	/* Console I/O Buffer Size	*/
+#define CONFIG_SYS_CBSIZE	        256	/* Console I/O Buffer Size	*/
 #endif
-#define CFG_PBSIZE              (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define CFG_MAXARGS	        16	/* max number of command args	*/
-#define CFG_BARGSIZE	        CFG_CBSIZE /* Boot Argument Buffer Size	*/
+#define CONFIG_SYS_PBSIZE              (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS	        16	/* max number of command args	*/
+#define CONFIG_SYS_BARGSIZE	        CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size	*/
 
-#define CFG_MEMTEST_START	0x0400000 /* memtest works on	        */
-#define CFG_MEMTEST_END		0x0C00000 /* 4 ... 12 MB in DRAM	*/
+#define CONFIG_SYS_MEMTEST_START	0x0400000 /* memtest works on	        */
+#define CONFIG_SYS_MEMTEST_END		0x0C00000 /* 4 ... 12 MB in DRAM	*/
 
-#define CFG_LOAD_ADDR		0x100000	/* default load address */
-#define CFG_EXTBDINFO		1	/* To use extended board_into (bd_t) */
+#define CONFIG_SYS_LOAD_ADDR		0x100000	/* default load address */
+#define CONFIG_SYS_EXTBDINFO		1	/* To use extended board_into (bd_t) */
 #define CONFIG_LYNXKDI          1       /* support kdi files            */
 
-#define CFG_HZ		        1000	/* decrementer freq: 1 ms ticks */
+#define CONFIG_SYS_HZ		        1000	/* decrementer freq: 1 ms ticks */
 
 /*-----------------------------------------------------------------------
  * PCI stuff
@@ -316,21 +316,21 @@
 #define CONFIG_PCI			/* include pci support	        */
 #undef  CONFIG_PCI_PNP			/* do (not) pci plug-and-play   */
 #define CONFIG_PCI_SCAN_SHOW            /* show pci devices on startup  */
-#define CFG_PCI_TARGBASE        0x80000000 /* PCIaddr mapped to CFG_PCI_MEMBASE*/
+#define CONFIG_SYS_PCI_TARGBASE        0x80000000 /* PCIaddr mapped to CONFIG_SYS_PCI_MEMBASE*/
 
 /* Board-specific PCI */
-#define CFG_PCI_TARGET_INIT
-#define CFG_PCI_MASTER_INIT
+#define CONFIG_SYS_PCI_TARGET_INIT
+#define CONFIG_SYS_PCI_MASTER_INIT
 
-#define CFG_PCI_SUBSYS_VENDORID 0x10e8	/* AMCC */
-#define CFG_PCI_SUBSYS_ID       0xcafe	/* Whatever */
+#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x10e8	/* AMCC */
+#define CONFIG_SYS_PCI_SUBSYS_ID       0xcafe	/* Whatever */
 
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
+#define CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
 
 /*-----------------------------------------------------------------------
  * External Bus Controller (EBC) Setup
@@ -338,36 +338,36 @@
 #define FLASH_BASE0_PRELIM	0xFFF00000	/* FLASH bank #0	*/
 #define FLASH_BASE1_PRELIM	0xFFF80000	/* FLASH bank #1	*/
 
-#define CFG_FLASH		FLASH_BASE0_PRELIM
-#define CFG_SRAM		0xF1000000
-#define CFG_FPGA		0xF2000000
-#define CFG_CF1			0xF0000000
-#define CFG_CF2			0xF0100000
+#define CONFIG_SYS_FLASH		FLASH_BASE0_PRELIM
+#define CONFIG_SYS_SRAM		0xF1000000
+#define CONFIG_SYS_FPGA		0xF2000000
+#define CONFIG_SYS_CF1			0xF0000000
+#define CONFIG_SYS_CF2			0xF0100000
 
 /* Memory Bank 0 (Flash Bank 0, NOR-FLASH) initialization			*/
-#define CFG_EBC_PB0AP		0x02010000	/* TWT=4,OEN=1			*/
-#define CFG_EBC_PB0CR		(CFG_FLASH | 0x18000) /* BS=1MB,BU=R/W,BW=8bit	*/
+#define CONFIG_SYS_EBC_PB0AP		0x02010000	/* TWT=4,OEN=1			*/
+#define CONFIG_SYS_EBC_PB0CR		(CONFIG_SYS_FLASH | 0x18000) /* BS=1MB,BU=R/W,BW=8bit	*/
 
 /* Memory Bank 1 (SRAM) initialization						*/
-#define CFG_EBC_PB1AP		0x01810040	/* TWT=3,OEN=1,BEM=1		*/
-#define CFG_EBC_PB1CR		(CFG_SRAM | 0x5A000) /* BS=4MB,BU=R/W,BW=16bit	*/
+#define CONFIG_SYS_EBC_PB1AP		0x01810040	/* TWT=3,OEN=1,BEM=1		*/
+#define CONFIG_SYS_EBC_PB1CR		(CONFIG_SYS_SRAM | 0x5A000) /* BS=4MB,BU=R/W,BW=16bit	*/
 
 /* Memory Bank 2 (FPGA) initialization						*/
-#define CFG_EBC_PB2AP		0x01010440	/* TWT=2,OEN=1,TH=2,BEM=1	*/
-#define CFG_EBC_PB2CR		(CFG_FPGA | 0x5A000) /* BS=4MB,BU=R/W,BW=16bit	*/
+#define CONFIG_SYS_EBC_PB2AP		0x01010440	/* TWT=2,OEN=1,TH=2,BEM=1	*/
+#define CONFIG_SYS_EBC_PB2CR		(CONFIG_SYS_FPGA | 0x5A000) /* BS=4MB,BU=R/W,BW=16bit	*/
 
 /* Memory Bank 3 (CompactFlash) initialization					*/
-#define CFG_EBC_PB3AP		0x080BD400
-#define CFG_EBC_PB3CR		(CFG_CF1 | 0x1A000) /* BS=1MB,BU=R/W,BW=16bit	*/
+#define CONFIG_SYS_EBC_PB3AP		0x080BD400
+#define CONFIG_SYS_EBC_PB3CR		(CONFIG_SYS_CF1 | 0x1A000) /* BS=1MB,BU=R/W,BW=16bit	*/
 
 /* Memory Bank 4 (CompactFlash) initialization					*/
-#define CFG_EBC_PB4AP		0x080BD400
-#define CFG_EBC_PB4CR		(CFG_CF2 | 0x1A000) /* BS=1MB,BU=R/W,BW=16bit	*/
+#define CONFIG_SYS_EBC_PB4AP		0x080BD400
+#define CONFIG_SYS_EBC_PB4CR		(CONFIG_SYS_CF2 | 0x1A000) /* BS=1MB,BU=R/W,BW=16bit	*/
 
 /*-----------------------------------------------------------------------
  * PPC440 GPIO Configuration
  */
-#define CFG_4xx_GPIO_TABLE { /*	  Out		       GPIO	Alternate1	Alternate2   Alternate3 */ \
+#define CONFIG_SYS_4xx_GPIO_TABLE { /*	  Out		       GPIO	Alternate1	Alternate2   Alternate3 */ \
 {											\
 /* GPIO Core 0 */									\
 {GPIO0_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG},  /* GPIO0	EBC_ADDR(7)	DMA_REQ(2)	*/ \
@@ -463,23 +463,23 @@
 #undef  CONFIG_IDE_8xx_DIRECT		/* Direct IDE    not supported	*/
 #undef  CONFIG_IDE_LED			/* LED   for ide not supported	*/
 
-#define CFG_IDE_MAXBUS		1	/* max. 1 IDE bus		*/
-#define CFG_IDE_MAXDEVICE	1	/* max. 2 drives per IDE bus	*/
+#define CONFIG_SYS_IDE_MAXBUS		1	/* max. 1 IDE bus		*/
+#define CONFIG_SYS_IDE_MAXDEVICE	1	/* max. 2 drives per IDE bus	*/
 
 #define CONFIG_IDE_PREINIT	1
 #define CONFIG_IDE_RESET	1
 
-#define CFG_ATA_IDE0_OFFSET	0x0000
+#define CONFIG_SYS_ATA_IDE0_OFFSET	0x0000
 
-#define CFG_ATA_BASE_ADDR	CFG_CF1
+#define CONFIG_SYS_ATA_BASE_ADDR	CONFIG_SYS_CF1
 
 /* Offset for data I/O			*/
-#define CFG_ATA_DATA_OFFSET	0
+#define CONFIG_SYS_ATA_DATA_OFFSET	0
 
 /* Offset for normal register accesses	*/
-#define CFG_ATA_REG_OFFSET	(CFG_ATA_DATA_OFFSET)
+#define CONFIG_SYS_ATA_REG_OFFSET	(CONFIG_SYS_ATA_DATA_OFFSET)
 
 /* Offset for alternate registers	*/
-#define CFG_ATA_ALT_OFFSET	(0x0000)
+#define CONFIG_SYS_ATA_ALT_OFFSET	(0x0000)
 
 #endif	/* __CONFIG_H */
diff --git a/include/configs/pcu_e.h b/include/configs/pcu_e.h
index 7e393f761..921451927 100644
--- a/include/configs/pcu_e.h
+++ b/include/configs/pcu_e.h
@@ -61,7 +61,7 @@
 	"bootm"
 
 #define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
-#undef	CFG_LOADS_BAUD_CHANGE		/* don't allow baudrate change	*/
+#undef	CONFIG_SYS_LOADS_BAUD_CHANGE		/* don't allow baudrate change	*/
 
 #undef	CONFIG_WATCHDOG			/* watchdog disabled		*/
 
@@ -75,8 +75,8 @@
 #define	CONFIG_SPI_X			/* 16 bit EEPROM addressing	*/
 
 #define CONFIG_HARD_I2C		1	/* I2C with hardware support	*/
-#define CFG_I2C_SPEED		400000	/* I2C speed and slave address	*/
-#define CFG_I2C_SLAVE		0x7F
+#define CONFIG_SYS_I2C_SPEED		400000	/* I2C speed and slave address	*/
+#define CONFIG_SYS_I2C_SLAVE		0x7F
 
 
 /* ----------------------------------------------------------------
@@ -87,7 +87,7 @@
  * far enough from the start of the data area (as well as from the
  * stack pointer).
  * ---------------------------------------------------------------- */
-#define CFG_SPI_INIT_OFFSET		0xB00
+#define CONFIG_SYS_SPI_INIT_OFFSET		0xB00
 
 
 /*
@@ -114,60 +114,60 @@
 /*
  * Miscellaneous configurable options
  */
-#define	CFG_LONGHELP			/* undef to save memory		*/
-#define	CFG_PROMPT	"=> "		/* Monitor Command Prompt	*/
+#define	CONFIG_SYS_LONGHELP			/* undef to save memory		*/
+#define	CONFIG_SYS_PROMPT	"=> "		/* Monitor Command Prompt	*/
 #if defined(CONFIG_CMD_KGDB)
-#define	CFG_CBSIZE	1024		/* Console I/O Buffer Size	*/
+#define	CONFIG_SYS_CBSIZE	1024		/* Console I/O Buffer Size	*/
 #else
-#define	CFG_CBSIZE	256		/* Console I/O Buffer Size	*/
+#define	CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size	*/
 #endif
-#define	CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define	CFG_MAXARGS	16		/* max number of command args	*/
-#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+#define	CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define	CONFIG_SYS_MAXARGS	16		/* max number of command args	*/
+#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
 
-#define CFG_MEMTEST_START	0x00100000	/* memtest works on	*/
-#define CFG_MEMTEST_END		0x00F00000	/* 1 ... 15MB in DRAM	*/
+#define CONFIG_SYS_MEMTEST_START	0x00100000	/* memtest works on	*/
+#define CONFIG_SYS_MEMTEST_END		0x00F00000	/* 1 ... 15MB in DRAM	*/
 
-#define	CFG_LOAD_ADDR		0x00100000	/* default load address	*/
+#define	CONFIG_SYS_LOAD_ADDR		0x00100000	/* default load address	*/
 
-#define	CFG_PIO_MODE		0	/* IDE interface in PIO Mode 0	*/
+#define	CONFIG_SYS_PIO_MODE		0	/* IDE interface in PIO Mode 0	*/
 
 /* Ethernet hardware configuration done using port pins */
-#define CFG_PB_ETH_RESET	0x00000020		/* PB 26	*/
+#define CONFIG_SYS_PB_ETH_RESET	0x00000020		/* PB 26	*/
 #if PCU_E_WITH_SWAPPED_CS /* XXX */
-#define CFG_PA_ETH_MDDIS	0x4000			/* PA  1	*/
-#define CFG_PB_ETH_POWERDOWN	0x00000800		/* PB 20	*/
-#define CFG_PB_ETH_CFG1		0x00000400		/* PB 21	*/
-#define CFG_PB_ETH_CFG2		0x00000200		/* PB 22	*/
-#define CFG_PB_ETH_CFG3		0x00000100		/* PB 23	*/
+#define CONFIG_SYS_PA_ETH_MDDIS	0x4000			/* PA  1	*/
+#define CONFIG_SYS_PB_ETH_POWERDOWN	0x00000800		/* PB 20	*/
+#define CONFIG_SYS_PB_ETH_CFG1		0x00000400		/* PB 21	*/
+#define CONFIG_SYS_PB_ETH_CFG2		0x00000200		/* PB 22	*/
+#define CONFIG_SYS_PB_ETH_CFG3		0x00000100		/* PB 23	*/
 #else /* XXX */
-#define CFG_PB_ETH_MDDIS	0x00000010		/* PB 27	*/
-#define CFG_PB_ETH_POWERDOWN	0x00000100		/* PB 23	*/
-#define CFG_PB_ETH_CFG1		0x00000200		/* PB 22	*/
-#define CFG_PB_ETH_CFG2		0x00000400		/* PB 21	*/
-#define CFG_PB_ETH_CFG3		0x00000800		/* PB 20	*/
+#define CONFIG_SYS_PB_ETH_MDDIS	0x00000010		/* PB 27	*/
+#define CONFIG_SYS_PB_ETH_POWERDOWN	0x00000100		/* PB 23	*/
+#define CONFIG_SYS_PB_ETH_CFG1		0x00000200		/* PB 22	*/
+#define CONFIG_SYS_PB_ETH_CFG2		0x00000400		/* PB 21	*/
+#define CONFIG_SYS_PB_ETH_CFG3		0x00000800		/* PB 20	*/
 #endif /* XXX */
 
 /* Ethernet settings:
  * MDIO enabled, autonegotiation, 10/100Mbps, half/full duplex
  */
-#define CFG_ETH_MDDIS_VALUE	0
-#define CFG_ETH_CFG1_VALUE	1
-#define CFG_ETH_CFG2_VALUE	1
-#define CFG_ETH_CFG3_VALUE	1
+#define CONFIG_SYS_ETH_MDDIS_VALUE	0
+#define CONFIG_SYS_ETH_CFG1_VALUE	1
+#define CONFIG_SYS_ETH_CFG2_VALUE	1
+#define CONFIG_SYS_ETH_CFG3_VALUE	1
 
 /* PUMA configuration */
 #if PCU_E_WITH_SWAPPED_CS /* XXX */
-#define CFG_PB_PUMA_PROG	0x00000010		/* PB 27	*/
+#define CONFIG_SYS_PB_PUMA_PROG	0x00000010		/* PB 27	*/
 #else /* XXX */
-#define CFG_PA_PUMA_PROG	0x4000			/* PA  1	*/
+#define CONFIG_SYS_PA_PUMA_PROG	0x4000			/* PA  1	*/
 #endif /* XXX */
-#define CFG_PC_PUMA_DONE	0x0008			/* PC 12	*/
-#define CFG_PC_PUMA_INIT	0x0004			/* PC 13	*/
+#define CONFIG_SYS_PC_PUMA_DONE	0x0008			/* PC 12	*/
+#define CONFIG_SYS_PC_PUMA_INIT	0x0004			/* PC 13	*/
 
-#define	CFG_HZ		1000		/* decrementer freq: 1 ms ticks	*/
+#define	CONFIG_SYS_HZ		1000		/* decrementer freq: 1 ms ticks	*/
 
-#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
 
 /*
  * Low Level Configuration Settings
@@ -177,75 +177,75 @@
 /*-----------------------------------------------------------------------
  * Internal Memory Mapped Register
  */
-#define CFG_IMMR		0xFE000000
+#define CONFIG_SYS_IMMR		0xFE000000
 
 /*-----------------------------------------------------------------------
  * Definitions for initial stack pointer and data area (in DPRAM)
  */
-#define CFG_INIT_RAM_ADDR	CFG_IMMR
-#define	CFG_INIT_RAM_END	0x2F00	/* End of used area in DPRAM	*/
-#define	CFG_GBL_DATA_SIZE	64  /* size in bytes reserved for initial data */
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define	CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_IMMR
+#define	CONFIG_SYS_INIT_RAM_END	0x2F00	/* End of used area in DPRAM	*/
+#define	CONFIG_SYS_GBL_DATA_SIZE	64  /* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define	CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
 /*-----------------------------------------------------------------------
  * Address accessed to reset the board - must not be mapped/assigned
  */
-#define	CFG_RESET_ADDRESS	0xFEFFFFFF
+#define	CONFIG_SYS_RESET_ADDRESS	0xFEFFFFFF
 
 /*-----------------------------------------------------------------------
  * Start addresses for the final memory configuration
  * (Set up by the startup code)
- * Please note that CFG_SDRAM_BASE _must_ start at 0
+ * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
  */
-#define	CFG_SDRAM_BASE		0x00000000
+#define	CONFIG_SYS_SDRAM_BASE		0x00000000
 /* this is an ugly hack needed because of the silly non-constant address map */
-#define CFG_FLASH_BASE		(0-flash_info[0].size-flash_info[1].size)
+#define CONFIG_SYS_FLASH_BASE		(0-flash_info[0].size-flash_info[1].size)
 
 #if defined(DEBUG)
-#define	CFG_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor	*/
+#define	CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor	*/
 #else
-#define	CFG_MONITOR_LEN		(192 << 10)	/* Reserve 192 kB for Monitor	*/
+#define	CONFIG_SYS_MONITOR_LEN		(192 << 10)	/* Reserve 192 kB for Monitor	*/
 #endif
-#define CFG_MONITOR_BASE	TEXT_BASE
-#define	CFG_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/
+#define CONFIG_SYS_MONITOR_BASE	TEXT_BASE
+#define	CONFIG_SYS_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/
 
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define	CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux	*/
+#define	CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux	*/
 /*-----------------------------------------------------------------------
  * FLASH organization
  */
-#define CFG_MAX_FLASH_BANKS	2	/* max number of memory banks		*/
-#define CFG_MAX_FLASH_SECT	160	/* max number of sectors on one chip	*/
+#define CONFIG_SYS_MAX_FLASH_BANKS	2	/* max number of memory banks		*/
+#define CONFIG_SYS_MAX_FLASH_SECT	160	/* max number of sectors on one chip	*/
 
-#define CFG_FLASH_ERASE_TOUT	180000	/* Timeout for Flash Erase (in ms)	*/
-#define CFG_FLASH_WRITE_TOUT	1000	/* Timeout for Flash Write (in ms)	*/
+#define CONFIG_SYS_FLASH_ERASE_TOUT	180000	/* Timeout for Flash Erase (in ms)	*/
+#define CONFIG_SYS_FLASH_WRITE_TOUT	1000	/* Timeout for Flash Write (in ms)	*/
 
 #if 0
 /* Start port with environment in flash; switch to SPI EEPROM later */
-#define	CFG_ENV_IS_IN_FLASH	1
-#define CFG_ENV_SIZE		0x2000	/* Total Size of Environment		*/
-#define CFG_ENV_ADDR	    0xFFFFE000	/* Address    of Environment Sector	*/
-#define CFG_ENV_SECT_SIZE	0x2000	/* use the top-most 8k boot sector	*/
-#define	CFG_ENV_IS_EMBEDDED	1	/* short-cut compile-time test		*/
+#define	CONFIG_ENV_IS_IN_FLASH	1
+#define CONFIG_ENV_SIZE		0x2000	/* Total Size of Environment		*/
+#define CONFIG_ENV_ADDR	    0xFFFFE000	/* Address    of Environment Sector	*/
+#define CONFIG_ENV_SECT_SIZE	0x2000	/* use the top-most 8k boot sector	*/
+#define	CONFIG_ENV_IS_EMBEDDED	1	/* short-cut compile-time test		*/
 #else
 /* Final version: environment in EEPROM */
-#define CFG_ENV_IS_IN_EEPROM	1
-#define CFG_I2C_EEPROM_ADDR	0
-#define CFG_I2C_EEPROM_ADDR_LEN	2
-#define CFG_ENV_OFFSET		1024
-#define CFG_ENV_SIZE		1024
+#define CONFIG_ENV_IS_IN_EEPROM	1
+#define CONFIG_SYS_I2C_EEPROM_ADDR	0
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN	2
+#define CONFIG_ENV_OFFSET		1024
+#define CONFIG_ENV_SIZE		1024
 #endif
 
 /*-----------------------------------------------------------------------
  * Cache Configuration
  */
-#define CFG_CACHELINE_SIZE	16	/* For all MPC8xx CPUs			*/
-#define CFG_CACHELINE_SHIFT	4	/* log base 2 of the above value	*/
+#define CONFIG_SYS_CACHELINE_SIZE	16	/* For all MPC8xx CPUs			*/
+#define CONFIG_SYS_CACHELINE_SHIFT	4	/* log base 2 of the above value	*/
 
 /*-----------------------------------------------------------------------
  * SYPCR - System Protection Control				11-9
@@ -254,10 +254,10 @@
  * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze
  */
 #if defined(CONFIG_WATCHDOG)
-#define CFG_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
+#define CONFIG_SYS_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
 			 SYPCR_SWE  | SYPCR_SWRI| SYPCR_SWP)
 #else
-#define CFG_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
+#define CONFIG_SYS_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
 #endif
 
 /*-----------------------------------------------------------------------
@@ -268,21 +268,21 @@
  * Asynchronous external master enable.
  */
 /* => 0x70600200 */
-#define CFG_SIUMCR	(SIUMCR_EARP7 | SIUMCR_DBGC11 | SIUMCR_AEME)
+#define CONFIG_SYS_SIUMCR	(SIUMCR_EARP7 | SIUMCR_DBGC11 | SIUMCR_AEME)
 
 /*-----------------------------------------------------------------------
  * TBSCR - Time Base Status and Control				11-26
  *-----------------------------------------------------------------------
  * Clear Reference Interrupt Status, Timebase freezing enabled
  */
-#define CFG_TBSCR	(TBSCR_REFA | TBSCR_REFB | TBSCR_TBF)
+#define CONFIG_SYS_TBSCR	(TBSCR_REFA | TBSCR_REFB | TBSCR_TBF)
 
 /*-----------------------------------------------------------------------
  * PISCR - Periodic Interrupt Status and Control		11-31
  *-----------------------------------------------------------------------
  * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
  */
-#define CFG_PISCR	(PISCR_PS | PISCR_PITF)
+#define CONFIG_SYS_PISCR	(PISCR_PS | PISCR_PITF)
 
 /*-----------------------------------------------------------------------
  * PLPRCR - PLL, Low-Power, and Reset Control Register		15-30
@@ -291,15 +291,15 @@
  * interrupt status bit, set PLL multiplication factor !
  */
 /* 0x00004080 */
-#define	CFG_PLPRCR_MF	0	/* (0+1) * 50 = 50 MHz Clock */
-#define CFG_PLPRCR							\
-		(	(CFG_PLPRCR_MF << PLPRCR_MF_SHIFT) |		\
+#define	CONFIG_SYS_PLPRCR_MF	0	/* (0+1) * 50 = 50 MHz Clock */
+#define CONFIG_SYS_PLPRCR							\
+		(	(CONFIG_SYS_PLPRCR_MF << PLPRCR_MF_SHIFT) |		\
 			PLPRCR_SPLSS | PLPRCR_TEXPS | PLPRCR_TMIST |	\
 			/*PLPRCR_CSRC|*/ PLPRCR_LPM_NORMAL |		\
 			PLPRCR_CSR    /*| PLPRCR_LOLRE|PLPRCR_FIOPD*/	\
 		)
 
-#define	CONFIG_8xx_GCLK_FREQ	((CFG_PLPRCR_MF+1)*50000000)
+#define	CONFIG_8xx_GCLK_FREQ	((CONFIG_SYS_PLPRCR_MF+1)*50000000)
 
 /*-----------------------------------------------------------------------
  * SCCR - System Clock and reset Control Register		15-27
@@ -311,7 +311,7 @@
  */
 #define SCCR_MASK	SCCR_EBDF11
 /* 0x01800000 */
-#define CFG_SCCR	(SCCR_COM00	| /*SCCR_TBS|*/		\
+#define CONFIG_SYS_SCCR	(SCCR_COM00	| /*SCCR_TBS|*/		\
 			 SCCR_RTDIV	|   SCCR_RTSEL	  |	\
 			 /*SCCR_CRQEN|*/  /*SCCR_PRQEN|*/	\
 			 SCCR_EBDF00 |   SCCR_DFSYNC00 |	\
@@ -328,34 +328,34 @@
  * Don't expect the "date" command to work without a 32kHz clock input!
  */
 /* 0x00C3 => 0x0003 */
-#define CFG_RTCSC	(RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE)
+#define CONFIG_SYS_RTCSC	(RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE)
 
 
 /*-----------------------------------------------------------------------
  * RCCR - RISC Controller Configuration Register		19-4
  *-----------------------------------------------------------------------
  */
-#define CFG_RCCR 0x0000
+#define CONFIG_SYS_RCCR 0x0000
 
 /*-----------------------------------------------------------------------
  * RMDS - RISC Microcode Development Support Control Register
  *-----------------------------------------------------------------------
  */
-#define CFG_RMDS 0
+#define CONFIG_SYS_RMDS 0
 
 /*-----------------------------------------------------------------------
  *
  * Interrupt Levels
  *-----------------------------------------------------------------------
  */
-#define CFG_CPM_INTERRUPT	13	/* SIU_LEVEL6	*/
+#define CONFIG_SYS_CPM_INTERRUPT	13	/* SIU_LEVEL6	*/
 
 /*-----------------------------------------------------------------------
  *
  *-----------------------------------------------------------------------
  *
  */
-#define CFG_DER	0
+#define CONFIG_SYS_DER	0
 
 /*
  * Init Memory Controller:
@@ -374,27 +374,27 @@
  * used to re-map FLASH: restrict access enough but not too much to
  * meddle with FLASH accesses
  */
-#define CFG_REMAP_OR_AM		0xFF800000	/* OR addr mask */
-#define CFG_PRELIM_OR_AM	0xFF800000	/* OR addr mask */
+#define CONFIG_SYS_REMAP_OR_AM		0xFF800000	/* OR addr mask */
+#define CONFIG_SYS_PRELIM_OR_AM	0xFF800000	/* OR addr mask */
 
 /* FLASH timing: CSNT = 0, ACS = 00, SCY = 8, EHTR = 1			*/
-#define CFG_OR_TIMING_FLASH	(OR_SCY_8_CLK | OR_EHTR)
+#define CONFIG_SYS_OR_TIMING_FLASH	(OR_SCY_8_CLK | OR_EHTR)
 
-#define CFG_OR0_REMAP	( CFG_REMAP_OR_AM | OR_ACS_DIV1 | OR_BI | \
-				CFG_OR_TIMING_FLASH)
-#define CFG_OR0_PRELIM	(CFG_PRELIM_OR_AM | OR_ACS_DIV1 | OR_BI | \
-				CFG_OR_TIMING_FLASH)
+#define CONFIG_SYS_OR0_REMAP	( CONFIG_SYS_REMAP_OR_AM | OR_ACS_DIV1 | OR_BI | \
+				CONFIG_SYS_OR_TIMING_FLASH)
+#define CONFIG_SYS_OR0_PRELIM	(CONFIG_SYS_PRELIM_OR_AM | OR_ACS_DIV1 | OR_BI | \
+				CONFIG_SYS_OR_TIMING_FLASH)
 /* 16 bit, bank valid */
-#define CFG_BR0_PRELIM	((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_PS_16 | BR_V )
+#define CONFIG_SYS_BR0_PRELIM	((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_PS_16 | BR_V )
 
 #if PCU_E_WITH_SWAPPED_CS /* XXX */
-#define CFG_OR6_REMAP	CFG_OR0_REMAP
-#define CFG_OR6_PRELIM	CFG_OR0_PRELIM
-#define CFG_BR6_PRELIM	((FLASH_BASE6_PRELIM & BR_BA_MSK) | BR_PS_16 | BR_V )
+#define CONFIG_SYS_OR6_REMAP	CONFIG_SYS_OR0_REMAP
+#define CONFIG_SYS_OR6_PRELIM	CONFIG_SYS_OR0_PRELIM
+#define CONFIG_SYS_BR6_PRELIM	((FLASH_BASE6_PRELIM & BR_BA_MSK) | BR_PS_16 | BR_V )
 #else /* XXX */
-#define CFG_OR1_REMAP	CFG_OR0_REMAP
-#define CFG_OR1_PRELIM	CFG_OR0_PRELIM
-#define CFG_BR1_PRELIM	((FLASH_BASE1_PRELIM & BR_BA_MSK) | BR_PS_16 | BR_V )
+#define CONFIG_SYS_OR1_REMAP	CONFIG_SYS_OR0_REMAP
+#define CONFIG_SYS_OR1_PRELIM	CONFIG_SYS_OR0_PRELIM
+#define CONFIG_SYS_BR1_PRELIM	((FLASH_BASE1_PRELIM & BR_BA_MSK) | BR_PS_16 | BR_V )
 #endif /* XXX */
 
 /*
@@ -413,11 +413,11 @@
 #define SDRAM_MAX_SIZE		0x04000000	/* max 64 MB SDRAM */
 
 #if PCU_E_WITH_SWAPPED_CS /* XXX */
-#define CFG_OR5_PRELIM	(SDRAM_PRELIM_OR_AM | SDRAM_TIMING )
-#define CFG_BR5_PRELIM	((SDRAM_BASE5_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
+#define CONFIG_SYS_OR5_PRELIM	(SDRAM_PRELIM_OR_AM | SDRAM_TIMING )
+#define CONFIG_SYS_BR5_PRELIM	((SDRAM_BASE5_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
 #else /* XXX */
-#define CFG_OR2_PRELIM	(SDRAM_PRELIM_OR_AM | SDRAM_TIMING )
-#define CFG_BR2_PRELIM	((SDRAM_BASE2_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
+#define CONFIG_SYS_OR2_PRELIM	(SDRAM_PRELIM_OR_AM | SDRAM_TIMING )
+#define CONFIG_SYS_BR2_PRELIM	((SDRAM_BASE2_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
 #endif /* XXX */
 
 /*
@@ -429,11 +429,11 @@
 #define CAN_CTRLR_TIMING	(OR_BI | OR_SCY_8_CLK | OR_SETA | OR_EHTR)
 
 #if PCU_E_WITH_SWAPPED_CS /* XXX */
-#define CFG_BR4_PRELIM		((CAN_CTRLR_BASE & BR_BA_MSK) | BR_PS_8 | BR_V)
-#define CFG_OR4_PRELIM		(CAN_CTRLR_OR_AM | CAN_CTRLR_TIMING)
+#define CONFIG_SYS_BR4_PRELIM		((CAN_CTRLR_BASE & BR_BA_MSK) | BR_PS_8 | BR_V)
+#define CONFIG_SYS_OR4_PRELIM		(CAN_CTRLR_OR_AM | CAN_CTRLR_TIMING)
 #else /* XXX */
-#define CFG_BR3_PRELIM		((CAN_CTRLR_BASE & BR_BA_MSK) | BR_PS_8 | BR_V)
-#define CFG_OR3_PRELIM		(CAN_CTRLR_OR_AM | CAN_CTRLR_TIMING)
+#define CONFIG_SYS_BR3_PRELIM		((CAN_CTRLR_BASE & BR_BA_MSK) | BR_PS_8 | BR_V)
+#define CONFIG_SYS_OR3_PRELIM		(CAN_CTRLR_OR_AM | CAN_CTRLR_TIMING)
 #endif /* XXX */
 
 /*
@@ -461,11 +461,11 @@
 #define PUMA_CONF_OR_READ	(PUMA_CONF_OR_AM | PUMA_CONF_READ_TIMING)
 
 #if PCU_E_WITH_SWAPPED_CS /* XXX */
-#define CFG_BR3_PRELIM		PUMA_CONF_BR_READ
-#define CFG_OR3_PRELIM		PUMA_CONF_OR_READ
+#define CONFIG_SYS_BR3_PRELIM		PUMA_CONF_BR_READ
+#define CONFIG_SYS_OR3_PRELIM		PUMA_CONF_OR_READ
 #else /* XXX */
-#define CFG_BR4_PRELIM		PUMA_CONF_BR_READ
-#define CFG_OR4_PRELIM		PUMA_CONF_OR_READ
+#define CONFIG_SYS_BR4_PRELIM		PUMA_CONF_BR_READ
+#define CONFIG_SYS_OR4_PRELIM		PUMA_CONF_OR_READ
 #endif /* XXX */
 
 /*
@@ -477,11 +477,11 @@
 #define PUMA_SMA8_TIMING	(OR_BI | OR_SCY_0_CLK | OR_EHTR)
 
 #if PCU_E_WITH_SWAPPED_CS /* XXX */
-#define CFG_BR2_PRELIM		((PUMA_SMA8_BASE & BR_BA_MSK) | BR_PS_8 | BR_V)
-#define CFG_OR2_PRELIM		(PUMA_SMA8_OR_AM | PUMA_SMA8_TIMING | OR_SETA)
+#define CONFIG_SYS_BR2_PRELIM		((PUMA_SMA8_BASE & BR_BA_MSK) | BR_PS_8 | BR_V)
+#define CONFIG_SYS_OR2_PRELIM		(PUMA_SMA8_OR_AM | PUMA_SMA8_TIMING | OR_SETA)
 #else /* XXX */
-#define CFG_BR5_PRELIM		((PUMA_SMA8_BASE & BR_BA_MSK) | BR_PS_8 | BR_V)
-#define CFG_OR5_PRELIM		(PUMA_SMA8_OR_AM | PUMA_SMA8_TIMING | OR_SETA)
+#define CONFIG_SYS_BR5_PRELIM		((PUMA_SMA8_BASE & BR_BA_MSK) | BR_PS_8 | BR_V)
+#define CONFIG_SYS_OR5_PRELIM		(PUMA_SMA8_OR_AM | PUMA_SMA8_TIMING | OR_SETA)
 #endif /* XXX */
 
 /*
@@ -493,11 +493,11 @@
 #define PUMA_SMA16_TIMING	(OR_BI | OR_SCY_0_CLK | OR_EHTR)
 
 #if PCU_E_WITH_SWAPPED_CS /* XXX */
-#define CFG_BR1_PRELIM		((PUMA_SMA16_BASE & BR_BA_MSK) | BR_PS_16 | BR_V)
-#define CFG_OR1_PRELIM		(PUMA_SMA16_OR_AM | PUMA_SMA16_TIMING | OR_SETA)
+#define CONFIG_SYS_BR1_PRELIM		((PUMA_SMA16_BASE & BR_BA_MSK) | BR_PS_16 | BR_V)
+#define CONFIG_SYS_OR1_PRELIM		(PUMA_SMA16_OR_AM | PUMA_SMA16_TIMING | OR_SETA)
 #else /* XXX */
-#define CFG_BR6_PRELIM		((PUMA_SMA16_BASE & BR_BA_MSK) | BR_PS_16 | BR_V)
-#define CFG_OR6_PRELIM		(PUMA_SMA16_OR_AM | PUMA_SMA16_TIMING | OR_SETA)
+#define CONFIG_SYS_BR6_PRELIM		((PUMA_SMA16_BASE & BR_BA_MSK) | BR_PS_16 | BR_V)
+#define CONFIG_SYS_OR6_PRELIM		(PUMA_SMA16_OR_AM | PUMA_SMA16_TIMING | OR_SETA)
 #endif /* XXX */
 
 /*
@@ -508,15 +508,15 @@
 #define PUMA_FLASH_OR_AM	0xFE000000	/* 32 MB */
 #define PUMA_FLASH_TIMING	(OR_BI | OR_SCY_0_CLK | OR_EHTR)
 
-#define CFG_BR7_PRELIM		((PUMA_FLASH_BASE & BR_BA_MSK) | BR_PS_16 | BR_V)
-#define CFG_OR7_PRELIM		(PUMA_FLASH_OR_AM | PUMA_FLASH_TIMING | OR_SETA)
+#define CONFIG_SYS_BR7_PRELIM		((PUMA_FLASH_BASE & BR_BA_MSK) | BR_PS_16 | BR_V)
+#define CONFIG_SYS_OR7_PRELIM		(PUMA_FLASH_OR_AM | PUMA_FLASH_TIMING | OR_SETA)
 
 /*
  * Memory Periodic Timer Prescaler
  */
 
 /* periodic timer for refresh */
-#define CFG_MPTPR	0x0200
+#define CONFIG_SYS_MPTPR	0x0200
 
 /*
  * MAMR settings for SDRAM
@@ -525,9 +525,9 @@
  * 0x30904114 = - " - | Periodic Timer A Enable, MAMR_TLFB_4X
  */
 /* periodic timer for refresh */
-#define CFG_MAMR_PTA	0x30	/* = 48 */
+#define CONFIG_SYS_MAMR_PTA	0x30	/* = 48 */
 
-#define CFG_MAMR	( (CFG_MAMR_PTA << MAMR_PTA_SHIFT) | \
+#define CONFIG_SYS_MAMR	( (CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT) | \
 			  MAMR_AMA_TYPE_1	| \
 			  MAMR_G0CLA_A10	| \
 			  MAMR_RLFA_1X		| \
diff --git a/include/configs/pdnb3.h b/include/configs/pdnb3.h
index 889207a94..8b7890e2c 100644
--- a/include/configs/pdnb3.h
+++ b/include/configs/pdnb3.h
@@ -45,7 +45,7 @@
 #define CONFIG_HAS_ETH1
 #define CONFIG_PHY1_ADDR	18	/* NPE1 PHY address		*/
 #define CONFIG_MII		1	/* MII PHY management		*/
-#define CFG_RX_ETH_BUFFER	16	/* Number of ethernet rx buffers & descriptors */
+#define CONFIG_SYS_RX_ETH_BUFFER	16	/* Number of ethernet rx buffers & descriptors */
 
 /*
  * Misc configuration options
@@ -53,7 +53,7 @@
 #define CONFIG_USE_IRQ          1	/* we need IRQ stuff for timer	*/
 
 #define CONFIG_BOOTCOUNT_LIMIT		/* support for bootcount limit	*/
-#define CFG_BOOTCOUNT_ADDR	0x60003000 /* inside qmrg sram		*/
+#define CONFIG_SYS_BOOTCOUNT_ADDR	0x60003000 /* inside qmrg sram		*/
 
 #define CONFIG_CMDLINE_TAG	1	/* enable passing of ATAGs	*/
 #define CONFIG_SETUP_MEMORY_TAGS 1
@@ -62,14 +62,14 @@
 /*
  * Size of malloc() pool
  */
-#define CFG_MALLOC_LEN		(1 << 20)
-#define CFG_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
+#define CONFIG_SYS_MALLOC_LEN		(1 << 20)
+#define CONFIG_SYS_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
 
 /* allow to overwrite serial and ethaddr */
 #define CONFIG_ENV_OVERWRITE
 
 #define CONFIG_BAUDRATE         115200
-#define CFG_IXP425_CONSOLE	IXP425_UART1   /* we use UART1 for console */
+#define CONFIG_SYS_IXP425_CONSOLE	IXP425_UART1   /* we use UART1 for console */
 
 
 /*
@@ -105,21 +105,21 @@
 /*
  * Miscellaneous configurable options
  */
-#define CFG_LONGHELP                            /* undef to save memory         */
-#define CFG_PROMPT              "=> "   /* Monitor Command Prompt       */
-#define CFG_CBSIZE              256             /* Console I/O Buffer Size      */
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define CFG_MAXARGS             16              /* max number of command args   */
-#define CFG_BARGSIZE            CFG_CBSIZE      /* Boot Argument Buffer Size    */
-
-#define CFG_MEMTEST_START       0x00400000      /* memtest works on     */
-#define CFG_MEMTEST_END         0x00800000      /* 4 ... 8 MB in DRAM   */
-#define CFG_LOAD_ADDR           0x00010000      /* default load address */
-
-#undef  CFG_CLKS_IN_HZ          /* everything, incl board info, in Hz */
-#define CFG_HZ			1000		/* decrementer freq: 1 ms ticks */
+#define CONFIG_SYS_LONGHELP                            /* undef to save memory         */
+#define CONFIG_SYS_PROMPT              "=> "   /* Monitor Command Prompt       */
+#define CONFIG_SYS_CBSIZE              256             /* Console I/O Buffer Size      */
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS             16              /* max number of command args   */
+#define CONFIG_SYS_BARGSIZE            CONFIG_SYS_CBSIZE      /* Boot Argument Buffer Size    */
+
+#define CONFIG_SYS_MEMTEST_START       0x00400000      /* memtest works on     */
+#define CONFIG_SYS_MEMTEST_END         0x00800000      /* 4 ... 8 MB in DRAM   */
+#define CONFIG_SYS_LOAD_ADDR           0x00010000      /* default load address */
+
+#undef  CONFIG_SYS_CLKS_IN_HZ          /* everything, incl board info, in Hz */
+#define CONFIG_SYS_HZ			1000		/* decrementer freq: 1 ms ticks */
 						/* valid baudrates */
-#define CFG_BAUDRATE_TABLE      { 9600, 19200, 38400, 57600, 115200 }
+#define CONFIG_SYS_BAUDRATE_TABLE      { 9600, 19200, 38400, 57600, 115200 }
 
 /*
  * Stack sizes
@@ -188,84 +188,84 @@
 #define PHYS_SDRAM_1            0x00000000 /* SDRAM Bank #1 */
 #define PHYS_SDRAM_1_SIZE       0x02000000 /* 32 MB */
 
-#define CFG_FLASH_BASE          0x50000000
-#define CFG_MONITOR_BASE	CFG_FLASH_BASE
+#define CONFIG_SYS_FLASH_BASE          0x50000000
+#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_FLASH_BASE
 #if defined(CONFIG_SCPU)
-#define CFG_MONITOR_LEN		(384 << 10)	/* Reserve 512 kB for Monitor	*/
+#define CONFIG_SYS_MONITOR_LEN		(384 << 10)	/* Reserve 512 kB for Monitor	*/
 #else
-#define CFG_MONITOR_LEN		(504 << 10)	/* Reserve 512 kB for Monitor	*/
+#define CONFIG_SYS_MONITOR_LEN		(504 << 10)	/* Reserve 512 kB for Monitor	*/
 #endif
 
 /*
  * Expansion bus settings
  */
 #if defined(CONFIG_SCPU)
-#define CFG_EXP_CS0		0x94d23C42	/* 8bit, max size		*/
+#define CONFIG_SYS_EXP_CS0		0x94d23C42	/* 8bit, max size		*/
 #else
-#define CFG_EXP_CS0		0x94913C43	/* 8bit, max size		*/
+#define CONFIG_SYS_EXP_CS0		0x94913C43	/* 8bit, max size		*/
 #endif
-#define CFG_EXP_CS1		0x85000043	/* 8bit, 512bytes		*/
+#define CONFIG_SYS_EXP_CS1		0x85000043	/* 8bit, 512bytes		*/
 
 /*
  * SDRAM settings
  */
-#define CFG_SDR_CONFIG		0x18
-#define CFG_SDR_MODE_CONFIG	0x1
-#define CFG_SDRAM_REFRESH_CNT	0x81a
+#define CONFIG_SYS_SDR_CONFIG		0x18
+#define CONFIG_SYS_SDR_MODE_CONFIG	0x1
+#define CONFIG_SYS_SDRAM_REFRESH_CNT	0x81a
 
 /*
  * FLASH and environment organization
  */
 #if defined(CONFIG_SCPU)
-#define CFG_FLASH_CFI				/* The flash is CFI compatible	*/
+#define CONFIG_SYS_FLASH_CFI				/* The flash is CFI compatible	*/
 #define CONFIG_FLASH_CFI_DRIVER			/* Use common CFI driver	*/
-#define CFG_FLASH_CFI_WIDTH	FLASH_CFI_16BIT	/* no byte writes on IXP4xx	*/
+#define CONFIG_SYS_FLASH_CFI_WIDTH	FLASH_CFI_16BIT	/* no byte writes on IXP4xx	*/
 #endif
 
-#define FLASH_BASE0_PRELIM	CFG_FLASH_BASE		/* FLASH bank #0	*/
+#define FLASH_BASE0_PRELIM	CONFIG_SYS_FLASH_BASE		/* FLASH bank #0	*/
 
-#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
-#define CFG_MAX_FLASH_SECT	256	/* max number of sectors on one chip	*/
+#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
+#define CONFIG_SYS_MAX_FLASH_SECT	256	/* max number of sectors on one chip	*/
 
-#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
-#define CFG_FLASH_WRITE_TOUT	1000	/* Timeout for Flash Write (in ms)	*/
+#define CONFIG_SYS_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
+#define CONFIG_SYS_FLASH_WRITE_TOUT	1000	/* Timeout for Flash Write (in ms)	*/
 
-#define CFG_FLASH_WORD_SIZE	unsigned char	/* flash word size (width)	*/
-#define CFG_FLASH_ADDR0		0x5555	/* 1st address for flash config cycles	*/
-#define CFG_FLASH_ADDR1		0x2AAA	/* 2nd address for flash config cycles	*/
+#define CONFIG_SYS_FLASH_WORD_SIZE	unsigned char	/* flash word size (width)	*/
+#define CONFIG_SYS_FLASH_ADDR0		0x5555	/* 1st address for flash config cycles	*/
+#define CONFIG_SYS_FLASH_ADDR1		0x2AAA	/* 2nd address for flash config cycles	*/
 /*
  * The following defines are added for buggy IOP480 byte interface.
  * All other boards should use the standard values (CPCI405 etc.)
  */
-#define CFG_FLASH_READ0		0x0000	/* 0 is standard			*/
-#define CFG_FLASH_READ1		0x0001	/* 1 is standard			*/
-#define CFG_FLASH_READ2		0x0002	/* 2 is standard			*/
+#define CONFIG_SYS_FLASH_READ0		0x0000	/* 0 is standard			*/
+#define CONFIG_SYS_FLASH_READ1		0x0001	/* 1 is standard			*/
+#define CONFIG_SYS_FLASH_READ2		0x0002	/* 2 is standard			*/
 
-#define CFG_FLASH_EMPTY_INFO		/* print 'E' for empty sector on flinfo */
+#define CONFIG_SYS_FLASH_EMPTY_INFO		/* print 'E' for empty sector on flinfo */
 
-#define	CFG_ENV_IS_IN_FLASH	1
+#define	CONFIG_ENV_IS_IN_FLASH	1
 
-#define CFG_ENV_ADDR		(CFG_FLASH_BASE + CFG_MONITOR_LEN)
+#define CONFIG_ENV_ADDR		(CONFIG_SYS_FLASH_BASE + CONFIG_SYS_MONITOR_LEN)
 #if defined(CONFIG_SCPU)
 /* no redundant environment on SCPU */
-#define CFG_ENV_SECT_SIZE	0x20000 /* size of one complete sector		*/
-#define	CFG_ENV_SIZE		0x4000	/* Total Size of Environment Sector	*/
+#define CONFIG_ENV_SECT_SIZE	0x20000 /* size of one complete sector		*/
+#define	CONFIG_ENV_SIZE		0x4000	/* Total Size of Environment Sector	*/
 #else
-#define CFG_ENV_SECT_SIZE	0x1000	/* size of one complete sector		*/
-#define	CFG_ENV_SIZE		0x1000	/* Total Size of Environment Sector	*/
+#define CONFIG_ENV_SECT_SIZE	0x1000	/* size of one complete sector		*/
+#define	CONFIG_ENV_SIZE		0x1000	/* Total Size of Environment Sector	*/
 
 /* Address and size of Redundant Environment Sector	*/
-#define CFG_ENV_ADDR_REDUND	(CFG_ENV_ADDR + CFG_ENV_SECT_SIZE)
-#define CFG_ENV_SIZE_REDUND	(CFG_ENV_SIZE)
+#define CONFIG_ENV_ADDR_REDUND	(CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE)
+#define CONFIG_ENV_SIZE_REDUND	(CONFIG_ENV_SIZE)
 #endif
 
 #if !defined(CONFIG_SCPU)
 /*
  * NAND-FLASH stuff
  */
-#define CFG_MAX_NAND_DEVICE	1
+#define CONFIG_SYS_MAX_NAND_DEVICE	1
 #define NAND_MAX_CHIPS		1
-#define CFG_NAND_BASE		0x51000000	/* NAND FLASH Base Address	*/
+#define CONFIG_SYS_NAND_BASE		0x51000000	/* NAND FLASH Base Address	*/
 #endif
 
 /*
@@ -273,22 +273,22 @@
  */
 
 /* FPGA program pin configuration */
-#define CFG_GPIO_PRG		12		/* FPGA program pin (cpu output)*/
-#define CFG_GPIO_CLK		10		/* FPGA clk pin (cpu output)    */
-#define CFG_GPIO_DATA		14		/* FPGA data pin (cpu output)   */
-#define CFG_GPIO_INIT		13		/* FPGA init pin (cpu input)    */
-#define CFG_GPIO_DONE		11		/* FPGA done pin (cpu input)    */
+#define CONFIG_SYS_GPIO_PRG		12		/* FPGA program pin (cpu output)*/
+#define CONFIG_SYS_GPIO_CLK		10		/* FPGA clk pin (cpu output)    */
+#define CONFIG_SYS_GPIO_DATA		14		/* FPGA data pin (cpu output)   */
+#define CONFIG_SYS_GPIO_INIT		13		/* FPGA init pin (cpu input)    */
+#define CONFIG_SYS_GPIO_DONE		11		/* FPGA done pin (cpu input)    */
 
 /* other GPIO's */
-#define CFG_GPIO_RESTORE_INT	0
-#define CFG_GPIO_RESTART_INT	1
-#define CFG_GPIO_SYS_RUNNING	2
-#define CFG_GPIO_PCI_INTA	3
-#define CFG_GPIO_PCI_INTB	4
-#define CFG_GPIO_I2C_SCL	6
-#define CFG_GPIO_I2C_SDA	7
-#define CFG_GPIO_FPGA_RESET	9
-#define CFG_GPIO_CLK_33M	15
+#define CONFIG_SYS_GPIO_RESTORE_INT	0
+#define CONFIG_SYS_GPIO_RESTART_INT	1
+#define CONFIG_SYS_GPIO_SYS_RUNNING	2
+#define CONFIG_SYS_GPIO_PCI_INTA	3
+#define CONFIG_SYS_GPIO_PCI_INTB	4
+#define CONFIG_SYS_GPIO_I2C_SCL	6
+#define CONFIG_SYS_GPIO_I2C_SDA	7
+#define CONFIG_SYS_GPIO_FPGA_RESET	9
+#define CONFIG_SYS_GPIO_CLK_33M	15
 
 /*
  * I2C stuff
@@ -298,23 +298,23 @@
 #undef	CONFIG_HARD_I2C			/* I2C with hardware support	*/
 #define	CONFIG_SOFT_I2C		1	/* I2C bit-banged		*/
 
-#define CFG_I2C_SPEED		83000	/* 83 kHz is supposed to work	*/
-#define CFG_I2C_SLAVE		0xFE
+#define CONFIG_SYS_I2C_SPEED		83000	/* 83 kHz is supposed to work	*/
+#define CONFIG_SYS_I2C_SLAVE		0xFE
 
 /*
  * Software (bit-bang) I2C driver configuration
  */
-#define PB_SCL		(1 << CFG_GPIO_I2C_SCL)
-#define PB_SDA		(1 << CFG_GPIO_I2C_SDA)
+#define PB_SCL		(1 << CONFIG_SYS_GPIO_I2C_SCL)
+#define PB_SDA		(1 << CONFIG_SYS_GPIO_I2C_SDA)
 
-#define I2C_INIT	GPIO_OUTPUT_ENABLE(CFG_GPIO_I2C_SCL)
-#define I2C_ACTIVE	GPIO_OUTPUT_ENABLE(CFG_GPIO_I2C_SDA)
-#define I2C_TRISTATE	GPIO_OUTPUT_DISABLE(CFG_GPIO_I2C_SDA)
+#define I2C_INIT	GPIO_OUTPUT_ENABLE(CONFIG_SYS_GPIO_I2C_SCL)
+#define I2C_ACTIVE	GPIO_OUTPUT_ENABLE(CONFIG_SYS_GPIO_I2C_SDA)
+#define I2C_TRISTATE	GPIO_OUTPUT_DISABLE(CONFIG_SYS_GPIO_I2C_SDA)
 #define I2C_READ	((*IXP425_GPIO_GPINR & PB_SDA) != 0)
-#define I2C_SDA(bit)	if (bit) GPIO_OUTPUT_SET(CFG_GPIO_I2C_SDA);	\
-	                else     GPIO_OUTPUT_CLEAR(CFG_GPIO_I2C_SDA)
-#define I2C_SCL(bit)	if (bit) GPIO_OUTPUT_SET(CFG_GPIO_I2C_SCL);	\
-			else     GPIO_OUTPUT_CLEAR(CFG_GPIO_I2C_SCL)
+#define I2C_SDA(bit)	if (bit) GPIO_OUTPUT_SET(CONFIG_SYS_GPIO_I2C_SDA);	\
+	                else     GPIO_OUTPUT_CLEAR(CONFIG_SYS_GPIO_I2C_SDA)
+#define I2C_SCL(bit)	if (bit) GPIO_OUTPUT_SET(CONFIG_SYS_GPIO_I2C_SCL);	\
+			else     GPIO_OUTPUT_CLEAR(CONFIG_SYS_GPIO_I2C_SCL)
 #define I2C_DELAY	udelay(3)	/* 1/4 I2C clock duration */
 
 /*
@@ -322,28 +322,28 @@
  */
 #if 0 /* test-only */
 #define CONFIG_RTC_DS1340	1
-#define CFG_I2C_RTC_ADDR	0x68
+#define CONFIG_SYS_I2C_RTC_ADDR	0x68
 #else
 /* M41T11 Serial Access Timekeeper(R) SRAM */
 #define CONFIG_RTC_M41T11	1
-#define CFG_I2C_RTC_ADDR	0x68
-#define CFG_M41T11_BASE_YEAR	1900	/* play along with the linux driver */
+#define CONFIG_SYS_I2C_RTC_ADDR	0x68
+#define CONFIG_SYS_M41T11_BASE_YEAR	1900	/* play along with the linux driver */
 #endif
 
 /*
  * Spartan3 FPGA configuration support
  */
-#define CFG_FPGA_MAX_SIZE	700*1024	/* 700kByte for XC3S500E	*/
+#define CONFIG_SYS_FPGA_MAX_SIZE	700*1024	/* 700kByte for XC3S500E	*/
 
-#define CFG_FPGA_PRG	(1 << CFG_GPIO_PRG)	/* FPGA program pin (cpu output)*/
-#define CFG_FPGA_CLK	(1 << CFG_GPIO_CLK)	/* FPGA clk pin (cpu output)    */
-#define CFG_FPGA_DATA	(1 << CFG_GPIO_DATA)	/* FPGA data pin (cpu output)   */
-#define CFG_FPGA_INIT	(1 << CFG_GPIO_INIT)	/* FPGA init pin (cpu input)    */
-#define CFG_FPGA_DONE	(1 << CFG_GPIO_DONE)	/* FPGA done pin (cpu input)    */
+#define CONFIG_SYS_FPGA_PRG	(1 << CONFIG_SYS_GPIO_PRG)	/* FPGA program pin (cpu output)*/
+#define CONFIG_SYS_FPGA_CLK	(1 << CONFIG_SYS_GPIO_CLK)	/* FPGA clk pin (cpu output)    */
+#define CONFIG_SYS_FPGA_DATA	(1 << CONFIG_SYS_GPIO_DATA)	/* FPGA data pin (cpu output)   */
+#define CONFIG_SYS_FPGA_INIT	(1 << CONFIG_SYS_GPIO_INIT)	/* FPGA init pin (cpu input)    */
+#define CONFIG_SYS_FPGA_DONE	(1 << CONFIG_SYS_GPIO_DONE)	/* FPGA done pin (cpu input)    */
 
 /*
  * Cache Configuration
  */
-#define CFG_CACHELINE_SIZE	32
+#define CONFIG_SYS_CACHELINE_SIZE	32
 
 #endif  /* __CONFIG_H */
diff --git a/include/configs/pf5200.h b/include/configs/pf5200.h
index c065d3328..b2e2a1c4a 100644
--- a/include/configs/pf5200.h
+++ b/include/configs/pf5200.h
@@ -44,7 +44,7 @@
 #define CONFIG_PF5200		1	/* ... on PF5200  board */
 #define CONFIG_MPC5200_DDR	1	/* ... use DDR RAM	*/
 
-#define CFG_MPC5XXX_CLKIN	33000000	/* ... running at 33.000000MHz */
+#define CONFIG_SYS_MPC5XXX_CLKIN	33000000	/* ... running at 33.000000MHz */
 
 #define BOOTFLAG_COLD		0x01	/* Normal Power-On: Boot from FLASH  */
 #define BOOTFLAG_WARM		0x02	/* Software reboot	     */
@@ -59,7 +59,7 @@
 #else
 #define CONFIG_BAUDRATE		9600	/* ... at 115200 bps */
 #endif
-#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
 
 #ifdef CONFIG_MPC5200		/* MPC5100 PCI is not supported yet. */
 /*
@@ -84,7 +84,7 @@
 #if 0				/* test-only !!! */
 #define CONFIG_NET_MULTI	1
 #define CONFIG_EEPRO100		1
-#define CFG_RX_ETH_BUFFER	8	/* use 8 rx buffer on eepro100	*/
+#define CONFIG_SYS_RX_ETH_BUFFER	8	/* use 8 rx buffer on eepro100	*/
 #define CONFIG_NS8382X		1
 #endif
 #endif
@@ -127,12 +127,12 @@
 
 
 #if (TEXT_BASE == 0xFF000000)	/* Boot low with 16 MB Flash */
-#   define CFG_LOWBOOT		1
-#   define CFG_LOWBOOT16	1
+#   define CONFIG_SYS_LOWBOOT		1
+#   define CONFIG_SYS_LOWBOOT16	1
 #endif
 #if (TEXT_BASE == 0xFF800000)	/* Boot low with  8 MB Flash */
-#   define CFG_LOWBOOT		1
-#   define CFG_LOWBOOT08	1
+#   define CONFIG_SYS_LOWBOOT		1
+#   define CONFIG_SYS_LOWBOOT08	1
 #endif
 
 /*
@@ -170,49 +170,49 @@
 /*
  * IPB Bus clocking configuration.
  */
-#undef CFG_IPBCLK_EQUALS_XLBCLK		/* define for 133MHz speed */
+#undef CONFIG_SYS_IPBCLK_EQUALS_XLBCLK		/* define for 133MHz speed */
 #endif
 /*
  * I2C configuration
  */
 #define CONFIG_HARD_I2C		1	/* I2C with hardware support */
-#define CFG_I2C_MODULE		2	/* Select I2C module #1 or #2 */
+#define CONFIG_SYS_I2C_MODULE		2	/* Select I2C module #1 or #2 */
 
-#define CFG_I2C_SPEED		86000	/* 100 kHz */
-#define CFG_I2C_SLAVE		0x7F
+#define CONFIG_SYS_I2C_SPEED		86000	/* 100 kHz */
+#define CONFIG_SYS_I2C_SLAVE		0x7F
 
 /*
  * EEPROM configuration
  */
-#define CFG_I2C_EEPROM_ADDR		0x50	/* 1010000x */
-#define CFG_I2C_EEPROM_ADDR_LEN		2
-#define CFG_EEPROM_PAGE_WRITE_BITS	5
-#define CFG_EEPROM_PAGE_WRITE_DELAY_MS	20
-#define CFG_I2C_MULTI_EEPROMS		1
+#define CONFIG_SYS_I2C_EEPROM_ADDR		0x50	/* 1010000x */
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN		2
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS	5
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	20
+#define CONFIG_SYS_I2C_MULTI_EEPROMS		1
 /*
  * Flash configuration
  */
-#define CFG_FLASH_BASE		0xFE000000
-#define CFG_FLASH_SIZE		0x02000000
-#define CFG_ENV_ADDR		(CFG_FLASH_BASE + 0x00000000)
-#define CFG_MAX_FLASH_BANKS	1	/* max num of memory banks	*/
-#define CFG_MAX_FLASH_SECT	512
+#define CONFIG_SYS_FLASH_BASE		0xFE000000
+#define CONFIG_SYS_FLASH_SIZE		0x02000000
+#define CONFIG_ENV_ADDR		(CONFIG_SYS_FLASH_BASE + 0x00000000)
+#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max num of memory banks	*/
+#define CONFIG_SYS_MAX_FLASH_SECT	512
 
-#define CFG_FLASH_ERASE_TOUT	240000	/* Flash Erase Timeout (in ms)	*/
-#define CFG_FLASH_WRITE_TOUT	500	/* Flash Write Timeout (in ms)	*/
+#define CONFIG_SYS_FLASH_ERASE_TOUT	240000	/* Flash Erase Timeout (in ms)	*/
+#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Flash Write Timeout (in ms)	*/
 
 /*
  * Environment settings
  */
 #if 1				/* test-only */
-#define CFG_ENV_IS_IN_FLASH	0
-#define CFG_ENV_SIZE		0x10000
-#define CFG_ENV_SECT_SIZE	0x10000
+#define CONFIG_ENV_IS_IN_FLASH
+#define CONFIG_ENV_SIZE		0x10000
+#define CONFIG_ENV_SECT_SIZE	0x10000
 #define CONFIG_ENV_OVERWRITE	1
 #else
-#define CFG_ENV_IS_IN_EEPROM	1	/* use EEPROM for environment vars */
-#define CFG_ENV_OFFSET		0x0000	/* environment starts at the beginning of the EEPROM */
-#define CFG_ENV_SIZE		0x0400	/* 8192 bytes may be used for env vars */
+#define CONFIG_ENV_IS_IN_EEPROM	1	/* use EEPROM for environment vars */
+#define CONFIG_ENV_OFFSET		0x0000	/* environment starts at the beginning of the EEPROM */
+#define CONFIG_ENV_SIZE		0x0400	/* 8192 bytes may be used for env vars */
 				   /* total size of a CAT24WC32 is 8192 bytes */
 #define CONFIG_ENV_OVERWRITE	1
 #endif
@@ -220,26 +220,26 @@
 /*
  * Memory map
  */
-#define CFG_MBAR		0xF0000000
-#define CFG_SDRAM_BASE		0x00000000
-#define CFG_DEFAULT_MBAR	0x80000000
+#define CONFIG_SYS_MBAR		0xF0000000
+#define CONFIG_SYS_SDRAM_BASE		0x00000000
+#define CONFIG_SYS_DEFAULT_MBAR	0x80000000
 
 /* Use SRAM until RAM will be available */
-#define CFG_INIT_RAM_ADDR	MPC5XXX_SRAM
-#define CFG_INIT_RAM_END	MPC5XXX_SRAM_SIZE	/* End of used area in DPRAM */
+#define CONFIG_SYS_INIT_RAM_ADDR	MPC5XXX_SRAM
+#define CONFIG_SYS_INIT_RAM_END	MPC5XXX_SRAM_SIZE	/* End of used area in DPRAM */
 
-#define CFG_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
-#define CFG_MONITOR_BASE    TEXT_BASE
-#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
-#   define CFG_RAMBOOT		1
+#define CONFIG_SYS_MONITOR_BASE    TEXT_BASE
+#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
+#   define CONFIG_SYS_RAMBOOT		1
 #endif
 
-#define CFG_MONITOR_LEN		(192 << 10)	/* Reserve 192 kB for Monitor	*/
-#define CFG_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/
-#define CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
+#define CONFIG_SYS_MONITOR_LEN		(192 << 10)	/* Reserve 192 kB for Monitor	*/
+#define CONFIG_SYS_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/
+#define CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
 
 /*
  * Ethernet configuration
@@ -255,62 +255,62 @@
 /*
  * GPIO configuration
  */
-#define CFG_GPS_PORT_CONFIG	0x01052444
+#define CONFIG_SYS_GPS_PORT_CONFIG	0x01052444
 
 /*
  * Miscellaneous configurable options
  */
-#define CFG_LONGHELP		/* undef to save memory	    */
-#define CFG_PROMPT		"=> "	/* Monitor Command Prompt   */
+#define CONFIG_SYS_LONGHELP		/* undef to save memory	    */
+#define CONFIG_SYS_PROMPT		"=> "	/* Monitor Command Prompt   */
 #if defined(CONFIG_CMD_KGDB)
-#define CFG_CBSIZE		1024	/* Console I/O Buffer Size  */
+#define CONFIG_SYS_CBSIZE		1024	/* Console I/O Buffer Size  */
 #else
-#define CFG_CBSIZE		256	/* Console I/O Buffer Size  */
+#define CONFIG_SYS_CBSIZE		256	/* Console I/O Buffer Size  */
 #endif
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16)	/* Print Buffer Size */
-#define CFG_MAXARGS		16	/* max number of command args	*/
-#define CFG_BARGSIZE		CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)	/* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS		16	/* max number of command args	*/
+#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
 
-#define CFG_MEMTEST_START	0x00100000	/* memtest works on */
-#define CFG_MEMTEST_END		0x00f00000	/* 1 ... 15 MB in DRAM	*/
+#define CONFIG_SYS_MEMTEST_START	0x00100000	/* memtest works on */
+#define CONFIG_SYS_MEMTEST_END		0x00f00000	/* 1 ... 15 MB in DRAM	*/
 
-#define CFG_LOAD_ADDR		0x100000	/* default load address */
+#define CONFIG_SYS_LOAD_ADDR		0x100000	/* default load address */
 
-#define CFG_HZ			1000	/* decrementer freq: 1 ms ticks */
+#define CONFIG_SYS_HZ			1000	/* decrementer freq: 1 ms ticks */
 
-#define CFG_VXWORKS_MAC_PTR	0x00000000	/* Pass Ethernet MAC to VxWorks */
+#define CONFIG_SYS_VXWORKS_MAC_PTR	0x00000000	/* Pass Ethernet MAC to VxWorks */
 
-#define CFG_CACHELINE_SIZE	32	/* For MPC5xxx CPUs */
+#define CONFIG_SYS_CACHELINE_SIZE	32	/* For MPC5xxx CPUs */
 #if defined(CONFIG_CMD_KGDB)
-#  define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value */
+#  define CONFIG_SYS_CACHELINE_SHIFT	5	/* log base 2 of the above value */
 #endif
 
 /*
  * Various low-level settings
  */
 #if defined(CONFIG_MPC5200)
-#define CFG_HID0_INIT		HID0_ICE | HID0_ICFI
-#define CFG_HID0_FINAL		HID0_ICE
+#define CONFIG_SYS_HID0_INIT		HID0_ICE | HID0_ICFI
+#define CONFIG_SYS_HID0_FINAL		HID0_ICE
 #else
-#define CFG_HID0_INIT		0
-#define CFG_HID0_FINAL		0
+#define CONFIG_SYS_HID0_INIT		0
+#define CONFIG_SYS_HID0_FINAL		0
 #endif
 
-#define CFG_BOOTCS_START	CFG_FLASH_BASE
-#define CFG_BOOTCS_SIZE		CFG_FLASH_SIZE
-#define CFG_BOOTCS_CFG		0x0004DD00
+#define CONFIG_SYS_BOOTCS_START	CONFIG_SYS_FLASH_BASE
+#define CONFIG_SYS_BOOTCS_SIZE		CONFIG_SYS_FLASH_SIZE
+#define CONFIG_SYS_BOOTCS_CFG		0x0004DD00
 
-#define CFG_CS0_START		CFG_FLASH_BASE
-#define CFG_CS0_SIZE		CFG_FLASH_SIZE
+#define CONFIG_SYS_CS0_START		CONFIG_SYS_FLASH_BASE
+#define CONFIG_SYS_CS0_SIZE		CONFIG_SYS_FLASH_SIZE
 
-#define CFG_CS1_START		0xfd000000
-#define CFG_CS1_SIZE		0x00010000
-#define CFG_CS1_CFG		0x10101410
+#define CONFIG_SYS_CS1_START		0xfd000000
+#define CONFIG_SYS_CS1_SIZE		0x00010000
+#define CONFIG_SYS_CS1_CFG		0x10101410
 
-#define CFG_CS_BURST		0x00000000
-#define CFG_CS_DEADCYCLE	0x33333333
+#define CONFIG_SYS_CS_BURST		0x00000000
+#define CONFIG_SYS_CS_DEADCYCLE	0x33333333
 
-#define CFG_RESET_ADDRESS	0xff000000
+#define CONFIG_SYS_RESET_ADDRESS	0xff000000
 
 /*-----------------------------------------------------------------------
  * USB stuff
@@ -332,71 +332,71 @@
 #define	CONFIG_IDE_RESET	/* reset for ide supported	*/
 #define CONFIG_IDE_PREINIT
 
-#define CFG_IDE_MAXBUS		1	/* max. 1 IDE bus		*/
-#define CFG_IDE_MAXDEVICE	1	/* max. 1 drive per IDE bus	*/
+#define CONFIG_SYS_IDE_MAXBUS		1	/* max. 1 IDE bus		*/
+#define CONFIG_SYS_IDE_MAXDEVICE	1	/* max. 1 drive per IDE bus	*/
 
-#define CFG_ATA_IDE0_OFFSET	0x0000
+#define CONFIG_SYS_ATA_IDE0_OFFSET	0x0000
 
-#define CFG_ATA_BASE_ADDR	MPC5XXX_ATA
+#define CONFIG_SYS_ATA_BASE_ADDR	MPC5XXX_ATA
 
 /* Offset for data I/O			*/
-#define CFG_ATA_DATA_OFFSET	(0x0060)
+#define CONFIG_SYS_ATA_DATA_OFFSET	(0x0060)
 
 /* Offset for normal register accesses	*/
-#define CFG_ATA_REG_OFFSET	(CFG_ATA_DATA_OFFSET)
+#define CONFIG_SYS_ATA_REG_OFFSET	(CONFIG_SYS_ATA_DATA_OFFSET)
 
 /* Offset for alternate registers	*/
-#define CFG_ATA_ALT_OFFSET	(0x005C)
+#define CONFIG_SYS_ATA_ALT_OFFSET	(0x005C)
 
 /* Interval between registers						     */
-#define CFG_ATA_STRIDE		4
+#define CONFIG_SYS_ATA_STRIDE		4
 
 /*-----------------------------------------------------------------------
  * CPLD stuff
  */
-#define CFG_FPGA_XC95XL		1	/* using Xilinx XC95XL CPLD	 */
-#define CFG_FPGA_MAX_SIZE	32*1024	/* 32kByte is enough for CPLD	 */
+#define CONFIG_SYS_FPGA_XC95XL		1	/* using Xilinx XC95XL CPLD	 */
+#define CONFIG_SYS_FPGA_MAX_SIZE	32*1024	/* 32kByte is enough for CPLD	 */
 
 /* CPLD program pin configuration */
-#define CFG_FPGA_PRG		0x20000000	/* JTAG TMS pin (ppc output)	       */
-#define CFG_FPGA_CLK		0x10000000	/* JTAG TCK pin (ppc output)	       */
-#define CFG_FPGA_DATA		0x20000000	/* JTAG TDO->TDI data pin (ppc output) */
-#define CFG_FPGA_DONE		0x10000000	/* JTAG TDI->TDO pin (ppc input)       */
+#define CONFIG_SYS_FPGA_PRG		0x20000000	/* JTAG TMS pin (ppc output)	       */
+#define CONFIG_SYS_FPGA_CLK		0x10000000	/* JTAG TCK pin (ppc output)	       */
+#define CONFIG_SYS_FPGA_DATA		0x20000000	/* JTAG TDO->TDI data pin (ppc output) */
+#define CONFIG_SYS_FPGA_DONE		0x10000000	/* JTAG TDI->TDO pin (ppc input)       */
 
-#define JTAG_GPIO_ADDR_TMS	(CFG_MBAR + 0xB10)	/* JTAG TMS pin (GPS data out value reg.)      */
-#define JTAG_GPIO_ADDR_TCK	(CFG_MBAR + 0xC0C)	/* JTAG TCK pin (GPW data out value reg.)      */
-#define JTAG_GPIO_ADDR_TDI	(CFG_MBAR + 0xC0C)	/* JTAG TDO->TDI pin (GPW data out value reg.) */
-#define JTAG_GPIO_ADDR_TDO	(CFG_MBAR + 0xB14)	/* JTAG TDI->TDO pin (GPS data in value reg.)  */
+#define JTAG_GPIO_ADDR_TMS	(CONFIG_SYS_MBAR + 0xB10)	/* JTAG TMS pin (GPS data out value reg.)      */
+#define JTAG_GPIO_ADDR_TCK	(CONFIG_SYS_MBAR + 0xC0C)	/* JTAG TCK pin (GPW data out value reg.)      */
+#define JTAG_GPIO_ADDR_TDI	(CONFIG_SYS_MBAR + 0xC0C)	/* JTAG TDO->TDI pin (GPW data out value reg.) */
+#define JTAG_GPIO_ADDR_TDO	(CONFIG_SYS_MBAR + 0xB14)	/* JTAG TDI->TDO pin (GPS data in value reg.)  */
 
-#define JTAG_GPIO_ADDR_CFG	(CFG_MBAR + 0xB00)
+#define JTAG_GPIO_ADDR_CFG	(CONFIG_SYS_MBAR + 0xB00)
 #define JTAG_GPIO_CFG_SET	0x00000000
 #define JTAG_GPIO_CFG_RESET	0x00F00000
 
-#define JTAG_GPIO_ADDR_EN_TMS	(CFG_MBAR + 0xB04)
+#define JTAG_GPIO_ADDR_EN_TMS	(CONFIG_SYS_MBAR + 0xB04)
 #define JTAG_GPIO_TMS_EN_SET	0x20000000	/* Enable for GPIO */
 #define JTAG_GPIO_TMS_EN_RESET	0x00000000
-#define JTAG_GPIO_ADDR_DDR_TMS	(CFG_MBAR + 0xB0C)
+#define JTAG_GPIO_ADDR_DDR_TMS	(CONFIG_SYS_MBAR + 0xB0C)
 #define JTAG_GPIO_TMS_DDR_SET	0x20000000	/* Set as output   */
 #define JTAG_GPIO_TMS_DDR_RESET 0x00000000
 
-#define JTAG_GPIO_ADDR_EN_TCK	(CFG_MBAR + 0xC00)
+#define JTAG_GPIO_ADDR_EN_TCK	(CONFIG_SYS_MBAR + 0xC00)
 #define JTAG_GPIO_TCK_EN_SET	0x20000000	/* Enable for GPIO */
 #define JTAG_GPIO_TCK_EN_RESET	0x00000000
-#define JTAG_GPIO_ADDR_DDR_TCK	(CFG_MBAR + 0xC08)
+#define JTAG_GPIO_ADDR_DDR_TCK	(CONFIG_SYS_MBAR + 0xC08)
 #define JTAG_GPIO_TCK_DDR_SET	0x20000000	/* Set as output   */
 #define JTAG_GPIO_TCK_DDR_RESET 0x00000000
 
-#define JTAG_GPIO_ADDR_EN_TDI	(CFG_MBAR + 0xC00)
+#define JTAG_GPIO_ADDR_EN_TDI	(CONFIG_SYS_MBAR + 0xC00)
 #define JTAG_GPIO_TDI_EN_SET	0x10000000	/* Enable as GPIO  */
 #define JTAG_GPIO_TDI_EN_RESET	0x00000000
-#define JTAG_GPIO_ADDR_DDR_TDI	(CFG_MBAR + 0xC08)
+#define JTAG_GPIO_ADDR_DDR_TDI	(CONFIG_SYS_MBAR + 0xC08)
 #define JTAG_GPIO_TDI_DDR_SET	0x10000000	/* Set as output   */
 #define JTAG_GPIO_TDI_DDR_RESET 0x00000000
 
-#define JTAG_GPIO_ADDR_EN_TDO	(CFG_MBAR + 0xB04)
+#define JTAG_GPIO_ADDR_EN_TDO	(CONFIG_SYS_MBAR + 0xB04)
 #define JTAG_GPIO_TDO_EN_SET	0x10000000	/* Enable as GPIO  */
 #define JTAG_GPIO_TDO_EN_RESET	0x00000000
-#define JTAG_GPIO_ADDR_DDR_TDO	(CFG_MBAR + 0xB0C)
+#define JTAG_GPIO_ADDR_DDR_TDO	(CONFIG_SYS_MBAR + 0xB0C)
 #define JTAG_GPIO_TDO_DDR_SET	0x00000000
 #define JTAG_GPIO_TDO_DDR_RESET 0x10000000	/* Set as input	   */
 
diff --git a/include/configs/pleb2.h b/include/configs/pleb2.h
index 863029d14..14f8917a9 100644
--- a/include/configs/pleb2.h
+++ b/include/configs/pleb2.h
@@ -45,8 +45,8 @@
 /*
  * Size of malloc() pool
  */
-#define CFG_MALLOC_LEN	    (CFG_ENV_SIZE + 128*1024)
-#define CFG_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
+#define CONFIG_SYS_MALLOC_LEN	    (CONFIG_ENV_SIZE + 128*1024)
+#define CONFIG_SYS_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
 
 /*
  * Hardware drivers
@@ -104,33 +104,33 @@
 /*
  * Miscellaneous configurable options
  */
-#define CFG_HUSH_PARSER		1
-#define CFG_PROMPT_HUSH_PS2	"> "
+#define CONFIG_SYS_HUSH_PARSER		1
+#define CONFIG_SYS_PROMPT_HUSH_PS2	"> "
 
-#define CFG_LONGHELP				/* undef to save memory		*/
-#ifdef CFG_HUSH_PARSER
-#define CFG_PROMPT		"$ "		/* Monitor Command Prompt */
+#define CONFIG_SYS_LONGHELP				/* undef to save memory		*/
+#ifdef CONFIG_SYS_HUSH_PARSER
+#define CONFIG_SYS_PROMPT		"$ "		/* Monitor Command Prompt */
 #else
-#define CFG_PROMPT		"=> "		/* Monitor Command Prompt */
+#define CONFIG_SYS_PROMPT		"=> "		/* Monitor Command Prompt */
 #endif
-#define CFG_CBSIZE		256		/* Console I/O Buffer Size	*/
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define CFG_MAXARGS		16		/* max number of command args	*/
-#define CFG_BARGSIZE		CFG_CBSIZE	/* Boot Argument Buffer Size	*/
-#define CFG_DEVICE_NULLDEV	1
+#define CONFIG_SYS_CBSIZE		256		/* Console I/O Buffer Size	*/
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS		16		/* max number of command args	*/
+#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
+#define CONFIG_SYS_DEVICE_NULLDEV	1
 
-#define CFG_MEMTEST_START	0xa0400000	/* memtest works on	*/
-#define CFG_MEMTEST_END		0xa0800000	/* 4 ... 8 MB in DRAM	*/
+#define CONFIG_SYS_MEMTEST_START	0xa0400000	/* memtest works on	*/
+#define CONFIG_SYS_MEMTEST_END		0xa0800000	/* 4 ... 8 MB in DRAM	*/
 
-#undef	CFG_CLKS_IN_HZ		/* everything, incl board info, in Hz */
+#undef	CONFIG_SYS_CLKS_IN_HZ		/* everything, incl board info, in Hz */
 
-#define CFG_LOAD_ADDR		0xa2000000	/* default load address */
+#define CONFIG_SYS_LOAD_ADDR		0xa2000000	/* default load address */
 
-#define CFG_HZ			3686400		/* incrementer freq: 3.6864 MHz */
-#define CFG_CPUSPEED		0x141		/* set core clock to 200/200/100 MHz */
+#define CONFIG_SYS_HZ			3686400		/* incrementer freq: 3.6864 MHz */
+#define CONFIG_SYS_CPUSPEED		0x141		/* set core clock to 200/200/100 MHz */
 
 						/* valid baudrates */
-#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
 
 /*
  * Stack sizes
@@ -164,94 +164,94 @@
 #define PHYS_FLASH_BANK_SIZE	0x02000000 /* 32 MB Banks */
 #define PHYS_FLASH_SECT_SIZE	0x00010000 /* 64 KB sectors (x2) */
 
-#define CFG_DRAM_BASE		PHYS_SDRAM_1
-#define CFG_DRAM_SIZE		PHYS_SDRAM_1_SIZE
+#define CONFIG_SYS_DRAM_BASE		PHYS_SDRAM_1
+#define CONFIG_SYS_DRAM_SIZE		PHYS_SDRAM_1_SIZE
 
-#define CFG_FLASH_BASE		PHYS_FLASH_1
-#define CFG_MONITOR_BASE	CFG_FLASH_BASE
+#define CONFIG_SYS_FLASH_BASE		PHYS_FLASH_1
+#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_FLASH_BASE
 
 /*
  * GPIO settings
  */
-#define CFG_GPSR0_VAL		0x00000000  /* Don't set anything */
-#define CFG_GPSR1_VAL		0x00000080
-#define CFG_GPSR2_VAL		0x00000000
+#define CONFIG_SYS_GPSR0_VAL		0x00000000  /* Don't set anything */
+#define CONFIG_SYS_GPSR1_VAL		0x00000080
+#define CONFIG_SYS_GPSR2_VAL		0x00000000
 
-#define CFG_GPCR0_VAL		0x00000000  /* Don't clear anything */
-#define CFG_GPCR1_VAL		0x00000000
-#define CFG_GPCR2_VAL		0x00000000
+#define CONFIG_SYS_GPCR0_VAL		0x00000000  /* Don't clear anything */
+#define CONFIG_SYS_GPCR1_VAL		0x00000000
+#define CONFIG_SYS_GPCR2_VAL		0x00000000
 
-#define CFG_GPDR0_VAL		0x00000000
-#define CFG_GPDR1_VAL		0x000007C3
-#define CFG_GPDR2_VAL		0x00000000
+#define CONFIG_SYS_GPDR0_VAL		0x00000000
+#define CONFIG_SYS_GPDR1_VAL		0x000007C3
+#define CONFIG_SYS_GPDR2_VAL		0x00000000
 
 /* Edge detect registers (these are set by the kernel) */
-#define CFG_GRER0_VAL	    0x00000000
-#define CFG_GRER1_VAL	    0x00000000
-#define CFG_GRER2_VAL	    0x00000000
-#define CFG_GFER0_VAL	    0x00000000
-#define CFG_GFER1_VAL	    0x00000000
-#define CFG_GFER2_VAL	    0x00000000
-
-#define CFG_GAFR0_L_VAL		0x00000000
-#define CFG_GAFR0_U_VAL		0x00000000
-#define CFG_GAFR1_L_VAL		0x00008010  /* Use FF UART Send and Receive */
-#define CFG_GAFR1_U_VAL		0x00000000
-#define CFG_GAFR2_L_VAL		0x00000000
-#define CFG_GAFR2_U_VAL		0x00000000
-
-#define CFG_PSSR_VAL		0x20
-#define CFG_CCCR_VAL	    0x00000141	/* 100 MHz memory, 200 MHz CPU	*/
-#define CFG_CKEN_VAL	    0x00000060	/* FFUART and STUART enabled	*/
-#define CFG_ICMR_VAL	    0x00000000	/* No interrupts enabled	*/
+#define CONFIG_SYS_GRER0_VAL	    0x00000000
+#define CONFIG_SYS_GRER1_VAL	    0x00000000
+#define CONFIG_SYS_GRER2_VAL	    0x00000000
+#define CONFIG_SYS_GFER0_VAL	    0x00000000
+#define CONFIG_SYS_GFER1_VAL	    0x00000000
+#define CONFIG_SYS_GFER2_VAL	    0x00000000
+
+#define CONFIG_SYS_GAFR0_L_VAL		0x00000000
+#define CONFIG_SYS_GAFR0_U_VAL		0x00000000
+#define CONFIG_SYS_GAFR1_L_VAL		0x00008010  /* Use FF UART Send and Receive */
+#define CONFIG_SYS_GAFR1_U_VAL		0x00000000
+#define CONFIG_SYS_GAFR2_L_VAL		0x00000000
+#define CONFIG_SYS_GAFR2_U_VAL		0x00000000
+
+#define CONFIG_SYS_PSSR_VAL		0x20
+#define CONFIG_SYS_CCCR_VAL	    0x00000141	/* 100 MHz memory, 200 MHz CPU	*/
+#define CONFIG_SYS_CKEN_VAL	    0x00000060	/* FFUART and STUART enabled	*/
+#define CONFIG_SYS_ICMR_VAL	    0x00000000	/* No interrupts enabled	*/
 
 /*
  * Memory settings
  */
-#define CFG_MSC0_VAL		0x00007FF0 /* Not properly calculated - FIXME (DS) */
-#define CFG_MSC1_VAL		0x00000000
-#define CFG_MSC2_VAL		0x00000000
+#define CONFIG_SYS_MSC0_VAL		0x00007FF0 /* Not properly calculated - FIXME (DS) */
+#define CONFIG_SYS_MSC1_VAL		0x00000000
+#define CONFIG_SYS_MSC2_VAL		0x00000000
 
-#define CFG_MDCNFG_VAL		0x00000aC9 /* Memory timings for the SDRAM.
+#define CONFIG_SYS_MDCNFG_VAL		0x00000aC9 /* Memory timings for the SDRAM.
 					      tRP=2, CL=2, tRCD=2, tRAS=5, tRC=8 */
 
-#define CFG_MDREFR_VAL		0x00403018 /* Initial setting, individual	*/
+#define CONFIG_SYS_MDREFR_VAL		0x00403018 /* Initial setting, individual	*/
 					   /* bits set in lowlevel_init.S	*/
-#define CFG_MDMRS_VAL		0x00000000
+#define CONFIG_SYS_MDMRS_VAL		0x00000000
 
 /*
  * PCMCIA and CF Interfaces
  */
-#define CFG_MECR_VAL		0x00000000  /* Hangover from Lubbock.
+#define CONFIG_SYS_MECR_VAL		0x00000000  /* Hangover from Lubbock.
 					       Needs calculating. (DS/CHC) */
-#define CFG_MCMEM0_VAL		0x00010504
-#define CFG_MCMEM1_VAL		0x00010504
-#define CFG_MCATT0_VAL		0x00010504
-#define CFG_MCATT1_VAL		0x00010504
-#define CFG_MCIO0_VAL		0x00004715
-#define CFG_MCIO1_VAL		0x00004715
+#define CONFIG_SYS_MCMEM0_VAL		0x00010504
+#define CONFIG_SYS_MCMEM1_VAL		0x00010504
+#define CONFIG_SYS_MCATT0_VAL		0x00010504
+#define CONFIG_SYS_MCATT1_VAL		0x00010504
+#define CONFIG_SYS_MCIO0_VAL		0x00004715
+#define CONFIG_SYS_MCIO1_VAL		0x00004715
 
 /*
  * FLASH and environment organization
  */
-#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
-#define CFG_MAX_FLASH_SECT	64	/* max number of sectors on one chip	*/
+#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
+#define CONFIG_SYS_MAX_FLASH_SECT	64	/* max number of sectors on one chip	*/
 
 /* timeout values are in ticks */
 /* FIXME */
-#define CFG_FLASH_ERASE_TOUT	(25*CFG_HZ) /* Timeout for Flash Erase */
-#define CFG_FLASH_WRITE_TOUT	(25*CFG_HZ) /* Timeout for Flash Write */
+#define CONFIG_SYS_FLASH_ERASE_TOUT	(25*CONFIG_SYS_HZ) /* Timeout for Flash Erase */
+#define CONFIG_SYS_FLASH_WRITE_TOUT	(25*CONFIG_SYS_HZ) /* Timeout for Flash Write */
 
 /* Flash protection */
-#define CFG_FLASH_PROTECTION	1
+#define CONFIG_SYS_FLASH_PROTECTION	1
 
 /* FIXME */
-#define CFG_ENV_IS_IN_FLASH	1
-#define CFG_ENV_ADDR		(PHYS_FLASH_1 + 0x3C000)	/* Addr of Environment Sector	*/
-#define CFG_ENV_SIZE		0x4000	/* Total Size of Environment */
-#define CFG_ENV_SECT_SIZE	0x20000
+#define CONFIG_ENV_IS_IN_FLASH	1
+#define CONFIG_ENV_ADDR		(PHYS_FLASH_1 + 0x3C000)	/* Addr of Environment Sector	*/
+#define CONFIG_ENV_SIZE		0x4000	/* Total Size of Environment */
+#define CONFIG_ENV_SECT_SIZE	0x20000
 
 /* Option added to get around byte ordering issues in the flash driver */
-#define CFG_LITTLE_ENDIAN	1
+#define CONFIG_SYS_LITTLE_ENDIAN	1
 
 #endif	/* __CONFIG_H */
diff --git a/include/configs/ppmc7xx.h b/include/configs/ppmc7xx.h
index 1d2d38b36..577ab8ef6 100644
--- a/include/configs/ppmc7xx.h
+++ b/include/configs/ppmc7xx.h
@@ -206,86 +206,86 @@
 /*
  * SDRAM config - see memory map details above.
  *
- * CFG_SDRAM_BASE		- Start address of SDRAM, this _must_ be zero!
- * CFG_SDRAM_SIZE		- Total size of contiguous SDRAM bank(s)
+ * CONFIG_SYS_SDRAM_BASE		- Start address of SDRAM, this _must_ be zero!
+ * CONFIG_SYS_SDRAM_SIZE		- Total size of contiguous SDRAM bank(s)
  */
 
-#define CFG_SDRAM_BASE		0x00000000
-#define CFG_SDRAM_SIZE		0x04000000
+#define CONFIG_SYS_SDRAM_BASE		0x00000000
+#define CONFIG_SYS_SDRAM_SIZE		0x04000000
 
 
 /*
  * Flash config - see memory map details above.
  *
- * CFG_FLASH_BASE		- Start address of flash memory
- * CFG_FLASH_SIZE		- Total size of contiguous flash mem
- * CFG_FLASH_ERASE_TOUT		- Erase timeout in ms
- * CFG_FLASH_WRITE_TOUT		- Write timeout in ms
- * CFG_MAX_FLASH_BANKS		- Number of banks of flash on board
- * CFG_MAX_FLASH_SECT		- Number of sectors in a bank
+ * CONFIG_SYS_FLASH_BASE		- Start address of flash memory
+ * CONFIG_SYS_FLASH_SIZE		- Total size of contiguous flash mem
+ * CONFIG_SYS_FLASH_ERASE_TOUT		- Erase timeout in ms
+ * CONFIG_SYS_FLASH_WRITE_TOUT		- Write timeout in ms
+ * CONFIG_SYS_MAX_FLASH_BANKS		- Number of banks of flash on board
+ * CONFIG_SYS_MAX_FLASH_SECT		- Number of sectors in a bank
  */
 
-#define CFG_FLASH_BASE		0xFFC00000
-#define CFG_FLASH_SIZE		0x00400000
-#define CFG_FLASH_ERASE_TOUT	250000
-#define CFG_FLASH_WRITE_TOUT	5000
-#define CFG_MAX_FLASH_BANKS	1
-#define CFG_MAX_FLASH_SECT	19
+#define CONFIG_SYS_FLASH_BASE		0xFFC00000
+#define CONFIG_SYS_FLASH_SIZE		0x00400000
+#define CONFIG_SYS_FLASH_ERASE_TOUT	250000
+#define CONFIG_SYS_FLASH_WRITE_TOUT	5000
+#define CONFIG_SYS_MAX_FLASH_BANKS	1
+#define CONFIG_SYS_MAX_FLASH_SECT	19
 
 
 /*
  * Monitor config - see memory map details above
  *
- * CFG_MONITOR_BASE		- Base address of monitor code
- * CFG_MALLOC_LEN		- Size of malloc pool (128KB)
+ * CONFIG_SYS_MONITOR_BASE		- Base address of monitor code
+ * CONFIG_SYS_MALLOC_LEN		- Size of malloc pool (128KB)
  */
 
-#define CFG_MONITOR_BASE	TEXT_BASE
-#define CFG_MALLOC_LEN		0x20000
+#define CONFIG_SYS_MONITOR_BASE	TEXT_BASE
+#define CONFIG_SYS_MALLOC_LEN		0x20000
 
 
 /*
  * Command shell settings
  *
- * CFG_BARGSIZE			- Boot Argument buffer size
- * CFG_BOOTMAPSZ		- Size of app's mapped RAM at boot (Linux=8MB)
- * CFG_CBSIZE			- Console Buffer (input) size
- * CFG_LOAD_ADDR		- Default load address
- * CFG_LONGHELP			- Provide more detailed help
- * CFG_MAXARGS			- Number of args accepted by monitor commands
- * CFG_MEMTEST_START		- Start address of test to run on RAM
- * CFG_MEMTEST_END		- End address of RAM test
- * CFG_PBSIZE			- Print Buffer (output) size
- * CFG_PROMPT			- Prompt string
+ * CONFIG_SYS_BARGSIZE			- Boot Argument buffer size
+ * CONFIG_SYS_BOOTMAPSZ		- Size of app's mapped RAM at boot (Linux=8MB)
+ * CONFIG_SYS_CBSIZE			- Console Buffer (input) size
+ * CONFIG_SYS_LOAD_ADDR		- Default load address
+ * CONFIG_SYS_LONGHELP			- Provide more detailed help
+ * CONFIG_SYS_MAXARGS			- Number of args accepted by monitor commands
+ * CONFIG_SYS_MEMTEST_START		- Start address of test to run on RAM
+ * CONFIG_SYS_MEMTEST_END		- End address of RAM test
+ * CONFIG_SYS_PBSIZE			- Print Buffer (output) size
+ * CONFIG_SYS_PROMPT			- Prompt string
  */
 
-#define CFG_BARGSIZE		1024
-#define CFG_BOOTMAPSZ		0x800000
-#define CFG_CBSIZE		1024
-#define CFG_LOAD_ADDR		0x100000
-#define CFG_LONGHELP
-#define CFG_MAXARGS		16
-#define CFG_MEMTEST_START	0x00040000
-#define CFG_MEMTEST_END		0x00040100
-#define CFG_PBSIZE		1024
-#define CFG_PROMPT		"=> "
+#define CONFIG_SYS_BARGSIZE		1024
+#define CONFIG_SYS_BOOTMAPSZ		0x800000
+#define CONFIG_SYS_CBSIZE		1024
+#define CONFIG_SYS_LOAD_ADDR		0x100000
+#define CONFIG_SYS_LONGHELP
+#define CONFIG_SYS_MAXARGS		16
+#define CONFIG_SYS_MEMTEST_START	0x00040000
+#define CONFIG_SYS_MEMTEST_END		0x00040100
+#define CONFIG_SYS_PBSIZE		1024
+#define CONFIG_SYS_PROMPT		"=> "
 
 
 /*
  * Environment config - see memory map details above
  *
- * CFG_ENV_IS_IN_FLASH		- The env variables are stored in flash
- * CFG_ENV_ADDR			- Address of the sector containing env vars
- * CFG_ENV_SIZE			- Ammount of RAM for env vars (used to save RAM, 4KB)
- * CFG_ENV_SECT_SIZE		- Size of sector containing env vars (32KB)
+ * CONFIG_ENV_IS_IN_FLASH		- The env variables are stored in flash
+ * CONFIG_ENV_ADDR			- Address of the sector containing env vars
+ * CONFIG_ENV_SIZE			- Ammount of RAM for env vars (used to save RAM, 4KB)
+ * CONFIG_ENV_SECT_SIZE		- Size of sector containing env vars (32KB)
  */
 
-#define CFG_ENV_IS_IN_FLASH	1
-#define CFG_ENV_ADDR		0xFFFE0000
-#define CFG_ENV_SIZE		0x1000
-#define CFG_ENV_ADDR_REDUND	0xFFFE8000
-#define CFG_ENV_SIZE_REDUND	0x1000
-#define CFG_ENV_SECT_SIZE	0x8000
+#define CONFIG_ENV_IS_IN_FLASH	1
+#define CONFIG_ENV_ADDR		0xFFFE0000
+#define CONFIG_ENV_SIZE		0x1000
+#define CONFIG_ENV_ADDR_REDUND	0xFFFE8000
+#define CONFIG_ENV_SIZE_REDUND	0x1000
+#define CONFIG_ENV_SECT_SIZE	0x8000
 
 
 /*
@@ -295,16 +295,16 @@
  * in the main system RAM just above the exception vectors. The contents are
  * copied to top of RAM by the init code.
  *
- * CFG_INIT_RAM_ADDR		- Address of Init RAM, above exception vect
- * CFG_INIT_RAM_END		- Size of Init RAM
- * CFG_GBL_DATA_SIZE		- Ammount of RAM to reserve for global data
- * CFG_GBL_DATA_OFFSET		- Start of global data, top of stack
+ * CONFIG_SYS_INIT_RAM_ADDR		- Address of Init RAM, above exception vect
+ * CONFIG_SYS_INIT_RAM_END		- Size of Init RAM
+ * CONFIG_SYS_GBL_DATA_SIZE		- Ammount of RAM to reserve for global data
+ * CONFIG_SYS_GBL_DATA_OFFSET		- Start of global data, top of stack
  */
 
-#define CFG_INIT_RAM_ADDR	(CFG_SDRAM_BASE + 0x4000)
-#define CFG_INIT_RAM_END	0x4000
-#define CFG_GBL_DATA_SIZE	128
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_RAM_ADDR	(CONFIG_SYS_SDRAM_BASE + 0x4000)
+#define CONFIG_SYS_INIT_RAM_END	0x4000
+#define CONFIG_SYS_GBL_DATA_SIZE	128
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
 
 
 /*
@@ -316,38 +316,38 @@
  * BAT3 - PCI I/O including Flash Memory
  */
 
-#define CFG_IBAT0L (CFG_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
-#define CFG_IBAT0U (CFG_SDRAM_BASE | BATU_BL_64M | BATU_VS | BATU_VP)
-#define CFG_DBAT0L CFG_IBAT0L
-#define CFG_DBAT0U CFG_IBAT0U
+#define CONFIG_SYS_IBAT0L (CONFIG_SYS_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
+#define CONFIG_SYS_IBAT0U (CONFIG_SYS_SDRAM_BASE | BATU_BL_64M | BATU_VS | BATU_VP)
+#define CONFIG_SYS_DBAT0L CONFIG_SYS_IBAT0L
+#define CONFIG_SYS_DBAT0U CONFIG_SYS_IBAT0U
 
-#define CFG_IBAT1L (0x70000000 | BATL_PP_RW | BATL_CACHEINHIBIT)
-#define CFG_IBAT1U (0x70000000 | BATU_BL_256M | BATU_VS | BATU_VP)
-#define CFG_DBAT1L (0x70000000 | BATL_PP_RW | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
-#define CFG_DBAT1U (0x70000000 | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CONFIG_SYS_IBAT1L (0x70000000 | BATL_PP_RW | BATL_CACHEINHIBIT)
+#define CONFIG_SYS_IBAT1U (0x70000000 | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CONFIG_SYS_DBAT1L (0x70000000 | BATL_PP_RW | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
+#define CONFIG_SYS_DBAT1U (0x70000000 | BATU_BL_256M | BATU_VS | BATU_VP)
 
-#define CFG_IBAT2L (0x80000000 | BATL_PP_RW | BATL_CACHEINHIBIT)
-#define CFG_IBAT2U (0x80000000 | BATU_BL_256M | BATU_VS | BATU_VP)
-#define CFG_DBAT2L (0x80000000 | BATL_PP_RW | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
-#define CFG_DBAT2U (0x80000000 | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CONFIG_SYS_IBAT2L (0x80000000 | BATL_PP_RW | BATL_CACHEINHIBIT)
+#define CONFIG_SYS_IBAT2U (0x80000000 | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CONFIG_SYS_DBAT2L (0x80000000 | BATL_PP_RW | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
+#define CONFIG_SYS_DBAT2U (0x80000000 | BATU_BL_256M | BATU_VS | BATU_VP)
 
-#define CFG_IBAT3L (0xF0000000 | BATL_PP_RW | BATL_CACHEINHIBIT)
-#define CFG_IBAT3U (0xF0000000 | BATU_BL_256M | BATU_VS | BATU_VP)
-#define CFG_DBAT3L (0xF0000000 | BATL_PP_RW | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
-#define CFG_DBAT3U (0xF0000000 | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CONFIG_SYS_IBAT3L (0xF0000000 | BATL_PP_RW | BATL_CACHEINHIBIT)
+#define CONFIG_SYS_IBAT3U (0xF0000000 | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CONFIG_SYS_DBAT3L (0xF0000000 | BATL_PP_RW | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
+#define CONFIG_SYS_DBAT3U (0xF0000000 | BATU_BL_256M | BATU_VS | BATU_VP)
 
 
 /*
  * Cache config
  *
- * CFG_CACHELINE_SIZE		- Size of a cache line (CPU specific)
- * CFG_L2			- L2 cache enabled if defined
+ * CONFIG_SYS_CACHELINE_SIZE		- Size of a cache line (CPU specific)
+ * CONFIG_SYS_L2			- L2 cache enabled if defined
  * L2_INIT			- L2 cache init flags
  * L2_ENABLE			- L2 cache enable flags
  */
 
-#define CFG_CACHELINE_SIZE	32
-#undef	CFG_L2
+#define CONFIG_SYS_CACHELINE_SIZE	32
+#undef	CONFIG_SYS_L2
 #define L2_INIT			0
 #define L2_ENABLE		0
 
@@ -355,66 +355,66 @@
 /*
  * Clocks config
  *
- * CFG_BUS_HZ			- Bus clock frequency in Hz
- * CFG_BUS_CLK			- As above (?)
- * CFG_HZ			- Decrementer freq in Hz
+ * CONFIG_SYS_BUS_HZ			- Bus clock frequency in Hz
+ * CONFIG_SYS_BUS_CLK			- As above (?)
+ * CONFIG_SYS_HZ			- Decrementer freq in Hz
  */
 
-#define CFG_BUS_HZ		CONFIG_BUS_CLK
-#define CFG_BUS_CLK		CONFIG_BUS_CLK
-#define CFG_HZ			1000
+#define CONFIG_SYS_BUS_HZ		CONFIG_BUS_CLK
+#define CONFIG_SYS_BUS_CLK		CONFIG_BUS_CLK
+#define CONFIG_SYS_HZ			1000
 
 
 /*
  * Serial port config
  *
- * CFG_BAUDRATE_TABLE		- List of valid baud rates
- * CFG_NS16550			- Include the NS16550 driver
- * CFG_NS16550_SERIAL		- Include the serial (wrapper) driver
- * CFG_NS16550_CLK		- Frequency of reference clock
- * CFG_NS16550_REG_SIZE		- 64-bit accesses to 8-bit port
- * CFG_NS16550_COM1		- Base address of 1st serial port
+ * CONFIG_SYS_BAUDRATE_TABLE		- List of valid baud rates
+ * CONFIG_SYS_NS16550			- Include the NS16550 driver
+ * CONFIG_SYS_NS16550_SERIAL		- Include the serial (wrapper) driver
+ * CONFIG_SYS_NS16550_CLK		- Frequency of reference clock
+ * CONFIG_SYS_NS16550_REG_SIZE		- 64-bit accesses to 8-bit port
+ * CONFIG_SYS_NS16550_COM1		- Base address of 1st serial port
  */
 
-#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
-#define CFG_NS16550
-#define CFG_NS16550_SERIAL
-#define CFG_NS16550_CLK		3686400
-#define CFG_NS16550_REG_SIZE	-8
-#define CFG_NS16550_COM1	0x7C000000
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+#define CONFIG_SYS_NS16550
+#define CONFIG_SYS_NS16550_SERIAL
+#define CONFIG_SYS_NS16550_CLK		3686400
+#define CONFIG_SYS_NS16550_REG_SIZE	-8
+#define CONFIG_SYS_NS16550_COM1	0x7C000000
 
 
 /*
  * PCI Config - Address Map B (CHRP)
  */
 
-#define CFG_PCI_MEMORY_BUS	0x00000000
-#define CFG_PCI_MEMORY_PHYS	0x00000000
-#define CFG_PCI_MEMORY_SIZE	0x40000000
-#define CFG_PCI_MEM_BUS		0x80000000
-#define CFG_PCI_MEM_PHYS	0x80000000
-#define CFG_PCI_MEM_SIZE	0x7D000000
-#define CFG_ISA_MEM_BUS		0x00000000
-#define CFG_ISA_MEM_PHYS	0xFD000000
-#define CFG_ISA_MEM_SIZE	0x01000000
-#define CFG_PCI_IO_BUS		0x00800000
-#define CFG_PCI_IO_PHYS		0xFE800000
-#define CFG_PCI_IO_SIZE		0x00400000
-#define CFG_ISA_IO_BUS		0x00000000
-#define CFG_ISA_IO_PHYS		0xFE000000
-#define CFG_ISA_IO_SIZE		0x00800000
-#define CFG_ISA_IO_BASE_ADDRESS CFG_ISA_IO_PHYS
-#define CFG_ISA_IO		CFG_ISA_IO_PHYS
-#define CFG_60X_PCI_IO_OFFSET	CFG_ISA_IO_PHYS
+#define CONFIG_SYS_PCI_MEMORY_BUS	0x00000000
+#define CONFIG_SYS_PCI_MEMORY_PHYS	0x00000000
+#define CONFIG_SYS_PCI_MEMORY_SIZE	0x40000000
+#define CONFIG_SYS_PCI_MEM_BUS		0x80000000
+#define CONFIG_SYS_PCI_MEM_PHYS	0x80000000
+#define CONFIG_SYS_PCI_MEM_SIZE	0x7D000000
+#define CONFIG_SYS_ISA_MEM_BUS		0x00000000
+#define CONFIG_SYS_ISA_MEM_PHYS	0xFD000000
+#define CONFIG_SYS_ISA_MEM_SIZE	0x01000000
+#define CONFIG_SYS_PCI_IO_BUS		0x00800000
+#define CONFIG_SYS_PCI_IO_PHYS		0xFE800000
+#define CONFIG_SYS_PCI_IO_SIZE		0x00400000
+#define CONFIG_SYS_ISA_IO_BUS		0x00000000
+#define CONFIG_SYS_ISA_IO_PHYS		0xFE000000
+#define CONFIG_SYS_ISA_IO_SIZE		0x00800000
+#define CONFIG_SYS_ISA_IO_BASE_ADDRESS CONFIG_SYS_ISA_IO_PHYS
+#define CONFIG_SYS_ISA_IO		CONFIG_SYS_ISA_IO_PHYS
+#define CONFIG_SYS_60X_PCI_IO_OFFSET	CONFIG_SYS_ISA_IO_PHYS
 
 
 /*
  * Extra init functions
  *
- * CFG_BOARD_ASM_INIT		- Call assembly init code
+ * CONFIG_SYS_BOARD_ASM_INIT		- Call assembly init code
  */
 
-#define CFG_BOARD_ASM_INIT
+#define CONFIG_SYS_BOARD_ASM_INIT
 
 
 /*
diff --git a/include/configs/ppmc8260.h b/include/configs/ppmc8260.h
index 6f1195b1e..ff7d61439 100644
--- a/include/configs/ppmc8260.h
+++ b/include/configs/ppmc8260.h
@@ -65,7 +65,7 @@
  * 0x6	     0x1	 66	133    266   Close  Close  Open
  * 0x6	     0x2	 66	133    300   Close  Open   Close
  */
-#define CFG_PPMC_MODCK_H 0x05
+#define CONFIG_SYS_PPMC_MODCK_H 0x05
 
 /* Define this if you want to boot from 0x00000100. If you don't define
  * this, you will need to program the bootloader to 0xfff00000, and
@@ -73,53 +73,53 @@
  * way to do that is to program the bootloader at both addresses.
  * It is suggested that you just let U-Boot live at 0x00000000.
  */
-#define CFG_PPMC_BOOT_LOW 1
+#define CONFIG_SYS_PPMC_BOOT_LOW 1
 
 /* What should the base address of the main FLASH be and how big is
  * it (in MBytes)? This must contain TEXT_BASE from board/ppmc8260/config.mk
  * The main FLASH is whichever is connected to *CS0. U-Boot expects
  * this to be the SIMM.
  */
-#define CFG_FLASH0_BASE 0xFE000000
-#define CFG_FLASH0_SIZE 16
+#define CONFIG_SYS_FLASH0_BASE 0xFE000000
+#define CONFIG_SYS_FLASH0_SIZE 16
 
 /* What should be the base address of the first SDRAM DIMM and how big is
  * it (in Mbytes)?
 */
-#define CFG_SDRAM0_BASE 0x00000000
-#define CFG_SDRAM0_SIZE 128
+#define CONFIG_SYS_SDRAM0_BASE 0x00000000
+#define CONFIG_SYS_SDRAM0_SIZE 128
 
 /* What should be the base address of the second SDRAM DIMM and how big is
  * it (in Mbytes)?
 */
-#define CFG_SDRAM1_BASE 0x08000000
-#define CFG_SDRAM1_SIZE 128
+#define CONFIG_SYS_SDRAM1_BASE 0x08000000
+#define CONFIG_SYS_SDRAM1_SIZE 128
 
 /* What should be the base address of the on board SDRAM and how big is
  * it (in Mbytes)?
 */
-#define CFG_SDRAM2_BASE 0x38000000
-#define CFG_SDRAM2_SIZE 16
+#define CONFIG_SYS_SDRAM2_BASE 0x38000000
+#define CONFIG_SYS_SDRAM2_SIZE 16
 
 /* What should be the base address of the MAILBOX  and how big is it
  * (in Bytes)
- * The eeprom lives at CFG_MAILBOX_BASE + 0x80000000
+ * The eeprom lives at CONFIG_SYS_MAILBOX_BASE + 0x80000000
  */
-#define CFG_MAILBOX_BASE 0x32000000
-#define CFG_MAILBOX_SIZE 8192
+#define CONFIG_SYS_MAILBOX_BASE 0x32000000
+#define CONFIG_SYS_MAILBOX_SIZE 8192
 
 /* What is the base address of the I/O select lines and how big is it
  * (In Mbytes)?
  */
 
-#define CFG_IOSELECT_BASE 0xE0000000
-#define CFG_IOSELECT_SIZE 32
+#define CONFIG_SYS_IOSELECT_BASE 0xE0000000
+#define CONFIG_SYS_IOSELECT_SIZE 32
 
 
 /* What should be the base address of the LEDs and switch S0?
  * If you don't want them enabled, don't define this.
  */
-#define CFG_LED_BASE 0xF1000000
+#define CONFIG_SYS_LED_BASE 0xF1000000
 
 /*
  * PPMC8260 with 256 16 MB DIMM:
@@ -137,11 +137,11 @@
  *		       Monitor Stack Buffer (0x80)
  *     0x0FF5 FFB0     Board Info Data
  *     0x0FF6 0000     Malloc Arena
- *	     :		    CFG_ENV_SECT_SIZE, 256k
- *	     :		    CFG_MALLOC_LEN,    128k
+ *	     :		    CONFIG_ENV_SECT_SIZE, 256k
+ *	     :		    CONFIG_SYS_MALLOC_LEN,    128k
  *     0x0FFC 0000     RAM Copy of Monitor Code
- *	     :		    CFG_MONITOR_LEN,   256k
- *     0x0FFF FFFF     [End of RAM], CFG_SDRAM_SIZE - 1
+ *	     :		    CONFIG_SYS_MONITOR_LEN,   256k
+ *     0x0FFF FFFF     [End of RAM], CONFIG_SYS_SDRAM_SIZE - 1
  */
 
 
@@ -200,7 +200,7 @@
  * put in the same sector as U-Boot, and changing variables
  * will erase U-Boot temporarily
  */
-#define CFG_ENV_IN_OWN_SECT	1
+#define CONFIG_ENV_IN_OWN_SECT	1
 
 /* Define to allow the user to overwrite serial and ethaddr */
 #define CONFIG_ENV_OVERWRITE
@@ -274,10 +274,10 @@
 
 
 /* undef this to save memory */
-#define CFG_LONGHELP
+#define CONFIG_SYS_LONGHELP
 
 /* Monitor Command Prompt */
-#define CFG_PROMPT		"=> "
+#define CONFIG_SYS_PROMPT		"=> "
 
 
 /*
@@ -296,7 +296,7 @@
 
 
 /* Where do the internal registers live? */
-#define CFG_IMMR		0xf0000000
+#define CONFIG_SYS_IMMR		0xf0000000
 
 /*****************************************************************************
  *
@@ -312,36 +312,36 @@
  * Miscellaneous configurable options
  */
 #if defined(CONFIG_CMD_KGDB)
-#  define CFG_CBSIZE		1024	/* Console I/O Buffer Size	     */
+#  define CONFIG_SYS_CBSIZE		1024	/* Console I/O Buffer Size	     */
 #else
-#  define CFG_CBSIZE		256	/* Console I/O Buffer Size	     */
+#  define CONFIG_SYS_CBSIZE		256	/* Console I/O Buffer Size	     */
 #endif
 
 /* Print Buffer Size */
-#define CFG_PBSIZE	  (CFG_CBSIZE + sizeof(CFG_PROMPT)+16)
+#define CONFIG_SYS_PBSIZE	  (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT)+16)
 
-#define CFG_MAXARGS		32	/* max number of command args	*/
+#define CONFIG_SYS_MAXARGS		32	/* max number of command args	*/
 
-#define CFG_BARGSIZE		CFG_CBSIZE /* Boot Argument Buffer Size	   */
+#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size	   */
 
-#define CFG_LOAD_ADDR		0x140000   /* default load address */
-#define CFG_HZ			1000	/* decrementer freq: 1 ms ticks */
+#define CONFIG_SYS_LOAD_ADDR		0x140000   /* default load address */
+#define CONFIG_SYS_HZ			1000	/* decrementer freq: 1 ms ticks */
 
-#define CFG_MEMTEST_START	0x2000	/* memtest works from the end of */
+#define CONFIG_SYS_MEMTEST_START	0x2000	/* memtest works from the end of */
 					/* the exception vector table */
 					/* to the end of the DRAM  */
 					/* less monitor and malloc area */
-#define CFG_STACK_USAGE		0x10000 /* Reserve 64k for the stack usage */
-#define CFG_MEM_END_USAGE	( CFG_MONITOR_LEN \
-				+ CFG_MALLOC_LEN \
-				+ CFG_ENV_SECT_SIZE \
-				+ CFG_STACK_USAGE )
+#define CONFIG_SYS_STACK_USAGE		0x10000 /* Reserve 64k for the stack usage */
+#define CONFIG_SYS_MEM_END_USAGE	( CONFIG_SYS_MONITOR_LEN \
+				+ CONFIG_SYS_MALLOC_LEN \
+				+ CONFIG_ENV_SECT_SIZE \
+				+ CONFIG_SYS_STACK_USAGE )
 
-#define CFG_MEMTEST_END		( CFG_SDRAM_SIZE * 1024 * 1024 \
-				- CFG_MEM_END_USAGE )
+#define CONFIG_SYS_MEMTEST_END		( CONFIG_SYS_SDRAM_SIZE * 1024 * 1024 \
+				- CONFIG_SYS_MEM_END_USAGE )
 
 /* valid baudrates */
-#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
 
 /*
  * Low Level Configuration Settings
@@ -355,7 +355,7 @@
  *  - RX clk is CLK11
  *  - TX clk is CLK12
  */
-#define CFG_CMXSCR_VALUE       (CMXSCR_RS1CS_CLK11  |\
+#define CONFIG_SYS_CMXSCR_VALUE       (CMXSCR_RS1CS_CLK11  |\
 				CMXSCR_TS1CS_CLK12)
 
 #elif defined(CONFIG_ETHER_ON_FCC) && (CONFIG_ETHER_INDEX == 2)
@@ -366,126 +366,126 @@
  * - Select bus for bd/buffers (see 28-13)
  * - Enable Full Duplex in FSMR
  */
-#define CFG_CMXFCR_MASK		(CMXFCR_FC2|CMXFCR_RF2CS_MSK|CMXFCR_TF2CS_MSK)
-#define CFG_CMXFCR_VALUE	(CMXFCR_RF2CS_CLK13|CMXFCR_TF2CS_CLK14)
-#define CFG_CPMFCR_RAMTYPE	0
-#define CFG_FCC_PSMR		(FCC_PSMR_FDE | FCC_PSMR_LPB)
+#define CONFIG_SYS_CMXFCR_MASK		(CMXFCR_FC2|CMXFCR_RF2CS_MSK|CMXFCR_TF2CS_MSK)
+#define CONFIG_SYS_CMXFCR_VALUE	(CMXFCR_RF2CS_CLK13|CMXFCR_TF2CS_CLK14)
+#define CONFIG_SYS_CPMFCR_RAMTYPE	0
+#define CONFIG_SYS_FCC_PSMR		(FCC_PSMR_FDE | FCC_PSMR_LPB)
 #endif	/* CONFIG_ETHER_INDEX */
 
-#define CFG_FLASH_BASE	CFG_FLASH0_BASE
-#define CFG_FLASH_SIZE	CFG_FLASH0_SIZE
-#define CFG_SDRAM_BASE	CFG_SDRAM0_BASE
-#define CFG_SDRAM_SIZE	(CFG_SDRAM0_SIZE + CFG_SDRAM1_SIZE)
+#define CONFIG_SYS_FLASH_BASE	CONFIG_SYS_FLASH0_BASE
+#define CONFIG_SYS_FLASH_SIZE	CONFIG_SYS_FLASH0_SIZE
+#define CONFIG_SYS_SDRAM_BASE	CONFIG_SYS_SDRAM0_BASE
+#define CONFIG_SYS_SDRAM_SIZE	(CONFIG_SYS_SDRAM0_SIZE + CONFIG_SYS_SDRAM1_SIZE)
 
 /*-----------------------------------------------------------------------
  * Hard Reset Configuration Words
  */
-#if defined(CFG_PPMC_BOOT_LOW)
-#  define  CFG_PPMC_HRCW_BOOT_FLAGS  (HRCW_CIP | HRCW_BMS)
+#if defined(CONFIG_SYS_PPMC_BOOT_LOW)
+#  define  CONFIG_SYS_PPMC_HRCW_BOOT_FLAGS  (HRCW_CIP | HRCW_BMS)
 #else
-#  define  CFG_PPMC_HRCW_BOOT_FLAGS  (0)
-#endif /* defined(CFG_PPMC_BOOT_LOW) */
+#  define  CONFIG_SYS_PPMC_HRCW_BOOT_FLAGS  (0)
+#endif /* defined(CONFIG_SYS_PPMC_BOOT_LOW) */
 
-/* get the HRCW ISB field from CFG_IMMR */
-#define CFG_PPMC_HRCW_IMMR	( ((CFG_IMMR & 0x10000000) >> 10) | \
-				  ((CFG_IMMR & 0x01000000) >>  7) | \
-				  ((CFG_IMMR & 0x00100000) >>  4) )
+/* get the HRCW ISB field from CONFIG_SYS_IMMR */
+#define CONFIG_SYS_PPMC_HRCW_IMMR	( ((CONFIG_SYS_IMMR & 0x10000000) >> 10) | \
+				  ((CONFIG_SYS_IMMR & 0x01000000) >>  7) | \
+				  ((CONFIG_SYS_IMMR & 0x00100000) >>  4) )
 
-#define CFG_HRCW_MASTER		( HRCW_EBM				| \
+#define CONFIG_SYS_HRCW_MASTER		( HRCW_EBM				| \
 				  HRCW_BPS11				| \
 				  HRCW_L2CPC10				| \
 				  HRCW_DPPC00				| \
-				  CFG_PPMC_HRCW_IMMR			| \
+				  CONFIG_SYS_PPMC_HRCW_IMMR			| \
 				  HRCW_MMR00				| \
 				  HRCW_LBPC00				| \
 				  HRCW_APPC10				| \
 				  HRCW_CS10PC00				| \
-				  (CFG_PPMC_MODCK_H & HRCW_MODCK_H1111) | \
-				  CFG_PPMC_HRCW_BOOT_FLAGS )
+				  (CONFIG_SYS_PPMC_MODCK_H & HRCW_MODCK_H1111) | \
+				  CONFIG_SYS_PPMC_HRCW_BOOT_FLAGS )
 
 /* no slaves */
-#define CFG_HRCW_SLAVE1		0
-#define CFG_HRCW_SLAVE2		0
-#define CFG_HRCW_SLAVE3		0
-#define CFG_HRCW_SLAVE4		0
-#define CFG_HRCW_SLAVE5		0
-#define CFG_HRCW_SLAVE6		0
-#define CFG_HRCW_SLAVE7		0
+#define CONFIG_SYS_HRCW_SLAVE1		0
+#define CONFIG_SYS_HRCW_SLAVE2		0
+#define CONFIG_SYS_HRCW_SLAVE3		0
+#define CONFIG_SYS_HRCW_SLAVE4		0
+#define CONFIG_SYS_HRCW_SLAVE5		0
+#define CONFIG_SYS_HRCW_SLAVE6		0
+#define CONFIG_SYS_HRCW_SLAVE7		0
 
 /*-----------------------------------------------------------------------
  * Definitions for initial stack pointer and data area (in DPRAM)
  */
-#define CFG_INIT_RAM_ADDR	CFG_IMMR
-#define CFG_INIT_RAM_END	0x4000	/* End of used area in DPRAM	*/
-#define CFG_GBL_DATA_SIZE	128	/* bytes reserved for initial data */
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_IMMR
+#define CONFIG_SYS_INIT_RAM_END	0x4000	/* End of used area in DPRAM	*/
+#define CONFIG_SYS_GBL_DATA_SIZE	128	/* bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
 /*-----------------------------------------------------------------------
  * Start addresses for the final memory configuration
  * (Set up by the startup code)
- * Please note that CFG_SDRAM_BASE _must_ start at 0
- * Note also that the logic that sets CFG_RAMBOOT is platform dependent.
+ * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
+ * Note also that the logic that sets CONFIG_SYS_RAMBOOT is platform dependent.
  */
-#define CFG_MONITOR_BASE	CFG_FLASH0_BASE
+#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_FLASH0_BASE
 
-#ifndef CFG_MONITOR_BASE
-#define CFG_MONITOR_BASE	0x0ff80000
+#ifndef CONFIG_SYS_MONITOR_BASE
+#define CONFIG_SYS_MONITOR_BASE	0x0ff80000
 #endif
 
-#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
-#  define CFG_RAMBOOT
+#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
+#  define CONFIG_SYS_RAMBOOT
 #endif
 
-#define CFG_MONITOR_LEN		(256 << 10)	/* Reserve 374 kB for Monitor	*/
-#define CFG_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/
+#define CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 374 kB for Monitor	*/
+#define CONFIG_SYS_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/
 
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
+#define CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
 
 /*-----------------------------------------------------------------------
  * FLASH and environment organization
  */
 
-#define CFG_FLASH_CFI		1	/* Flash is CFI conformant		*/
+#define CONFIG_SYS_FLASH_CFI		1	/* Flash is CFI conformant		*/
 #define CONFIG_FLASH_CFI_DRIVER	1	/* Use the common driver		*/
-#define CFG_MAX_FLASH_SECT	128	/* max number of sectors on one chip	*/
-#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
-#define CFG_FLASH_INCREMENT	0	/* there is only one bank		*/
-#define CFG_FLASH_PROTECTION	1	/* use hardware protection		*/
-#define CFG_FLASH_USE_BUFFER_WRITE 1    /* use buffered writes (20x faster)     */
+#define CONFIG_SYS_MAX_FLASH_SECT	128	/* max number of sectors on one chip	*/
+#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
+#define CONFIG_SYS_FLASH_INCREMENT	0	/* there is only one bank		*/
+#define CONFIG_SYS_FLASH_PROTECTION	1	/* use hardware protection		*/
+#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1    /* use buffered writes (20x faster)     */
 
 
-#ifndef CFG_RAMBOOT
+#ifndef CONFIG_SYS_RAMBOOT
 
-#  define CFG_ENV_IS_IN_FLASH	1
-#  ifdef CFG_ENV_IN_OWN_SECT
-#    define CFG_ENV_ADDR	(CFG_MONITOR_BASE + 0x40000)
-#    define CFG_ENV_SECT_SIZE	0x40000
+#  define CONFIG_ENV_IS_IN_FLASH	1
+#  ifdef CONFIG_ENV_IN_OWN_SECT
+#    define CONFIG_ENV_ADDR	(CONFIG_SYS_MONITOR_BASE + 0x40000)
+#    define CONFIG_ENV_SECT_SIZE	0x40000
 #  else
-#    define CFG_ENV_ADDR (CFG_FLASH_BASE + CFG_MONITOR_LEN - CFG_ENV_SECT_SIZE)
-#    define CFG_ENV_SIZE	0x1000	/* Total Size of Environment Sector	*/
-#    define CFG_ENV_SECT_SIZE	0x40000 /* see README - env sect real size	*/
-#  endif /* CFG_ENV_IN_OWN_SECT */
+#    define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + CONFIG_SYS_MONITOR_LEN - CONFIG_ENV_SECT_SIZE)
+#    define CONFIG_ENV_SIZE	0x1000	/* Total Size of Environment Sector	*/
+#    define CONFIG_ENV_SECT_SIZE	0x40000 /* see README - env sect real size	*/
+#  endif /* CONFIG_ENV_IN_OWN_SECT */
 
 #else
-#  define CFG_ENV_IS_IN_FLASH	1
-#  define CFG_ENV_ADDR		(CFG_FLASH_BASE + 0x40000)
-#define CFG_ENV_SIZE		0x1000
-#  define CFG_ENV_SECT_SIZE	0x40000
-#endif /* CFG_RAMBOOT */
+#  define CONFIG_ENV_IS_IN_FLASH	1
+#  define CONFIG_ENV_ADDR		(CONFIG_SYS_FLASH_BASE + 0x40000)
+#define CONFIG_ENV_SIZE		0x1000
+#  define CONFIG_ENV_SECT_SIZE	0x40000
+#endif /* CONFIG_SYS_RAMBOOT */
 
 /*-----------------------------------------------------------------------
  * Cache Configuration
  */
-#define CFG_CACHELINE_SIZE	32	/* For MPC8260 CPU */
+#define CONFIG_SYS_CACHELINE_SIZE	32	/* For MPC8260 CPU */
 
 #if defined(CONFIG_CMD_KGDB)
-# define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value */
+# define CONFIG_SYS_CACHELINE_SHIFT	5	/* log base 2 of the above value */
 #endif
 
 /*-----------------------------------------------------------------------
@@ -498,30 +498,30 @@
  *
  * HID1 has only read-only information - nothing to set.
  */
-#define CFG_HID0_INIT	(HID0_ICE  |\
+#define CONFIG_SYS_HID0_INIT	(HID0_ICE  |\
 			 HID0_DCE  |\
 			 HID0_ICFI |\
 			 HID0_DCI  |\
 			 HID0_IFEM |\
 			 HID0_ABE)
 
-#define CFG_HID0_FINAL	(HID0_ICE  |\
+#define CONFIG_SYS_HID0_FINAL	(HID0_ICE  |\
 			 HID0_IFEM |\
 			 HID0_ABE  |\
 			 HID0_EMCP)
-#define CFG_HID2	0
+#define CONFIG_SYS_HID2	0
 
 /*-----------------------------------------------------------------------
  * RMR - Reset Mode Register
  *-----------------------------------------------------------------------
  */
-#define CFG_RMR		0
+#define CONFIG_SYS_RMR		0
 
 /*-----------------------------------------------------------------------
  * BCR - Bus Configuration					 4-25
  *-----------------------------------------------------------------------
  */
-#define CFG_BCR		(BCR_EBM      |\
+#define CONFIG_SYS_BCR		(BCR_EBM      |\
 			 0x30000000)
 
 /*-----------------------------------------------------------------------
@@ -530,7 +530,7 @@
  *-----------------------------------------------------------------------
  */
 
-#define CFG_SIUMCR	(SIUMCR_ESE	 |\
+#define CONFIG_SYS_SIUMCR	(SIUMCR_ESE	 |\
 			 SIUMCR_DPPC00	 |\
 			 SIUMCR_L2CPC10	 |\
 			 SIUMCR_LBPC00	 |\
@@ -546,7 +546,7 @@
  *-----------------------------------------------------------------------
  * Watchdog & Bus Monitor Timer max, 60x Bus Monitor enable
  */
-#define CFG_SYPCR	(SYPCR_SWTC |\
+#define CONFIG_SYS_SYPCR	(SYPCR_SWTC |\
 			 SYPCR_BMT  |\
 			 SYPCR_PBME |\
 			 SYPCR_LBME |\
@@ -559,7 +559,7 @@
  * Clear once per Second and Alarm Interrupt Status, Set 32KHz timersclk,
  * and enable Time Counter
  */
-#define CFG_TMCNTSC	(TMCNTSC_SEC |\
+#define CONFIG_SYS_TMCNTSC	(TMCNTSC_SEC |\
 			 TMCNTSC_ALR |\
 			 TMCNTSC_TCF |\
 			 TMCNTSC_TCE)
@@ -570,7 +570,7 @@
  * Clear Periodic Interrupt Status, Set 32KHz timersclk, and enable
  * Periodic timer
  */
-#define CFG_PISCR	(PISCR_PS  |\
+#define CONFIG_SYS_PISCR	(PISCR_PS  |\
 			 PISCR_PTF |\
 			 PISCR_PTE)
 
@@ -578,13 +578,13 @@
  * SCCR - System Clock Control					 9-8
  *-----------------------------------------------------------------------
  */
-#define CFG_SCCR	0
+#define CONFIG_SYS_SCCR	0
 
 /*-----------------------------------------------------------------------
  * RCCR - RISC Controller Configuration				13-7
  *-----------------------------------------------------------------------
  */
-#define CFG_RCCR	0
+#define CONFIG_SYS_RCCR	0
 
 /*
  * Initialize Memory Controller:
@@ -635,7 +635,7 @@
  *     - No data pipelining is done
  *     - Valid
  */
-#define CFG_BR0_PRELIM	((CFG_FLASH0_BASE & BRx_BA_MSK) |\
+#define CONFIG_SYS_BR0_PRELIM	((CONFIG_SYS_FLASH0_BASE & BRx_BA_MSK) |\
 			 BRx_PS_32			|\
 			 BRx_MS_GPCM_P			|\
 			 BRx_V)
@@ -654,7 +654,7 @@
  *     - One idle clock is inserted between a read access from the
  *	 current bank and the next access.
  */
-#define CFG_OR0_PRELIM	(MEG_TO_AM(CFG_FLASH0_SIZE)	|\
+#define CONFIG_SYS_OR0_PRELIM	(MEG_TO_AM(CONFIG_SYS_FLASH0_SIZE)	|\
 			 ORxG_CSNT			|\
 			 ORxG_ACS_DIV1			|\
 			 ORxG_SCY_5_CLK			|\
@@ -685,12 +685,12 @@
  *     - No data pipelining is done
  *     - Valid
  */
-#define CFG_BR2_PRELIM	((CFG_SDRAM0_BASE & BRx_BA_MSK) |\
+#define CONFIG_SYS_BR2_PRELIM	((CONFIG_SYS_SDRAM0_BASE & BRx_BA_MSK) |\
 			 BRx_PS_64			|\
 			 BRx_MS_SDRAM_P			|\
 			 BRx_V)
 
-#define CFG_BR3_PRELIM	((CFG_SDRAM1_BASE & BRx_BA_MSK) |\
+#define CONFIG_SYS_BR3_PRELIM	((CONFIG_SYS_SDRAM1_BASE & BRx_BA_MSK) |\
 			 BRx_PS_64			|\
 			 BRx_MS_SDRAM_P			|\
 			 BRx_V)
@@ -705,12 +705,12 @@
  *     - Internal bank interleaving within save device enabled
  */
 
-#define CFG_OR2_PRELIM	(MEG_TO_AM(CFG_SDRAM0_SIZE)	|\
+#define CONFIG_SYS_OR2_PRELIM	(MEG_TO_AM(CONFIG_SYS_SDRAM0_SIZE)	|\
 			 ORxS_BPD_4			|\
 			 ORxS_ROWST_PBI0_A7		|\
 			 ORxS_NUMR_13)
 
-#define CFG_OR3_PRELIM	(MEG_TO_AM(CFG_SDRAM1_SIZE)	|\
+#define CONFIG_SYS_OR3_PRELIM	(MEG_TO_AM(CONFIG_SYS_SDRAM1_SIZE)	|\
 			 ORxS_BPD_4			|\
 			 ORxS_ROWST_PBI0_A7		|\
 			 ORxS_NUMR_13)
@@ -741,7 +741,7 @@
  *     - External Address Multiplexing enabled
  *     - CAS Latency is 2.
  */
-#define CFG_PSDMR	(PSDMR_RFEN	      |\
+#define CONFIG_SYS_PSDMR	(PSDMR_RFEN	      |\
 			 PSDMR_SDAM_A14_IS_A5 |\
 			 PSDMR_BSMA_A13_A15   |\
 			 PSDMR_SDA10_PBI0_A9  |\
@@ -754,8 +754,8 @@
 			 PSDMR_CL_2)
 
 
-#define CFG_PSRT	0x0e
-#define CFG_MPTPR	MPTPR_PTP_DIV32
+#define CONFIG_SYS_PSRT	0x0e
+#define CONFIG_SYS_MPTPR	MPTPR_PTP_DIV32
 
 
 /*-----------------------------------------------------------------------
@@ -783,7 +783,7 @@
  *
  */
 
-#define CFG_BR4_PRELIM	((CFG_SDRAM2_BASE & BRx_BA_MSK) |\
+#define CONFIG_SYS_BR4_PRELIM	((CONFIG_SYS_SDRAM2_BASE & BRx_BA_MSK) |\
 			 BRx_PS_32			|\
 			 BRx_DECC_NONE			|\
 			 BRx_MS_SDRAM_L			|\
@@ -798,7 +798,7 @@
  *     - Internal bank interleaving within save device enabled
  */
 
-#define CFG_OR4_PRELIM	(MEG_TO_AM(CFG_SDRAM2_SIZE)	|\
+#define CONFIG_SYS_OR4_PRELIM	(MEG_TO_AM(CONFIG_SYS_SDRAM2_SIZE)	|\
 			 ORxS_BPD_4			|\
 			 ORxS_ROWST_PBI0_A10		|\
 			 ORxS_NUMR_12)
@@ -830,7 +830,7 @@
  *     - External Address Multiplexing disabled
  *     - CAS Latency is 2.
  */
-#define CFG_LSDMR	(PSDMR_RFEN	      |\
+#define CONFIG_SYS_LSDMR	(PSDMR_RFEN	      |\
 			 PSDMR_SDAM_A13_IS_A5 |\
 			 PSDMR_BSMA_A15_A17   |\
 			 PSDMR_SDA10_PBI0_A11 |\
@@ -842,7 +842,7 @@
 			 PSDMR_WRC_1C	      |\
 			 PSDMR_CL_2)
 
-#define CFG_LSRT	0x0e
+#define CONFIG_SYS_LSRT	0x0e
 
 /*-----------------------------------------------------------------------
  * BR5 - Base Register
@@ -873,7 +873,7 @@
  *     - Valid
  */
 
-#define CFG_BR5_PRELIM	((CFG_MAILBOX_BASE & BRx_BA_MSK) |\
+#define CONFIG_SYS_BR5_PRELIM	((CONFIG_SYS_MAILBOX_BASE & BRx_BA_MSK) |\
 			 BRx_PS_8			 |\
 			 BRx_DECC_NONE			 |\
 			 BRx_MS_GPCM_P			 |\
@@ -891,7 +891,7 @@
  *	 current bank and the next access.
  */
 
-#define CFG_OR5_PRELIM ((P2SZ_TO_AM(CFG_MAILBOX_SIZE) & ~0x80000000) |\
+#define CONFIG_SYS_OR5_PRELIM ((P2SZ_TO_AM(CONFIG_SYS_MAILBOX_SIZE) & ~0x80000000) |\
 			 ORxG_ACS_DIV2				     |\
 			 ORxG_SCY_15_CLK			     |\
 			 ORxG_TRLX				     |\
@@ -921,7 +921,7 @@
  *     - No data pipelining is done
  *     - Valid
  */
-#define CFG_BR6_PRELIM	((CFG_IOSELECT_BASE & BRx_BA_MSK) |\
+#define CONFIG_SYS_BR6_PRELIM	((CONFIG_SYS_IOSELECT_BASE & BRx_BA_MSK) |\
 			   BRx_PS_16			  |\
 			   BRx_MS_GPCM_P		  |\
 			   BRx_V)
@@ -939,7 +939,7 @@
  *	 current bank and the next access.
  */
 
-#define CFG_OR6_PRELIM (MEG_TO_AM(CFG_IOSELECT_SIZE) |\
+#define CONFIG_SYS_OR6_PRELIM (MEG_TO_AM(CONFIG_SYS_IOSELECT_SIZE) |\
 			 ORxG_ACS_DIV2		     |\
 			 ORxG_SCY_15_CLK	     |\
 			 ORxG_TRLX		     |\
@@ -959,7 +959,7 @@
  *  LEDs     are at 0x00001 (write only)
  *  switches are at 0x00001 (read only)
  */
-#ifdef CFG_LED_BASE
+#ifdef CONFIG_SYS_LED_BASE
 
 /* BR7 is configured as follows:
  *
@@ -973,7 +973,7 @@
  *     - No data pipelining is done
  *     - Valid
  */
-#define CFG_BR7_PRELIM	((CFG_LED_BASE & BRx_BA_MSK)	 |\
+#define CONFIG_SYS_BR7_PRELIM	((CONFIG_SYS_LED_BASE & BRx_BA_MSK)	 |\
 			   BRx_PS_8			 |\
 			   BRx_DECC_NONE		 |\
 			   BRx_MS_GPCM_P		 |\
@@ -993,13 +993,13 @@
  *     - One idle clock is inserted between a read access from the
  *	 current bank and the next access.
  */
-#define CFG_OR7_PRELIM	(ORxG_AM_MSK		       |\
+#define CONFIG_SYS_OR7_PRELIM	(ORxG_AM_MSK		       |\
 			 ORxG_CSNT		       |\
 			 ORxG_ACS_DIV1		       |\
 			 ORxG_SCY_15_CLK	       |\
 			 ORxG_TRLX		       |\
 			 ORxG_EHTR)
-#endif /* CFG_LED_BASE */
+#endif /* CONFIG_SYS_LED_BASE */
 
 /*
  * Internal Definitions
diff --git a/include/configs/purple.h b/include/configs/purple.h
index ef9263712..2573aa1e3 100644
--- a/include/configs/purple.h
+++ b/include/configs/purple.h
@@ -43,7 +43,7 @@
 #define CONFIG_BAUDRATE		19200
 
 /* valid baudrates */
-#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
 
 #define	CONFIG_TIMESTAMP		/* Print image info with timestamp */
 
@@ -99,55 +99,55 @@
 #define CONFIG_CMD_ELF
 
 
-#define CFG_SDRAM_BASE		0x80000000
+#define CONFIG_SYS_SDRAM_BASE		0x80000000
 
-#define CFG_INIT_SP_OFFSET      0x400000
+#define CONFIG_SYS_INIT_SP_OFFSET      0x400000
 
-#define CFG_MALLOC_LEN		128*1024
+#define CONFIG_SYS_MALLOC_LEN		128*1024
 
-#define CFG_BOOTPARAMS_LEN	128*1024
+#define CONFIG_SYS_BOOTPARAMS_LEN	128*1024
 
 /*
  * Miscellaneous configurable options
  */
-#define	CFG_LONGHELP				/* undef to save memory      */
-#define	CFG_PROMPT		"PURPLE # "	/* Monitor Command Prompt    */
-#define	CFG_CBSIZE		256		/* Console I/O Buffer Size   */
-#define	CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16)  /* Print Buffer Size */
-#define CFG_MIPS_TIMER_FREQ	(CPU_CLOCK_RATE/2)
-#define CFG_HZ			1000
-#define	CFG_MAXARGS		16		/* max number of command args*/
+#define	CONFIG_SYS_LONGHELP				/* undef to save memory      */
+#define	CONFIG_SYS_PROMPT		"PURPLE # "	/* Monitor Command Prompt    */
+#define	CONFIG_SYS_CBSIZE		256		/* Console I/O Buffer Size   */
+#define	CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)  /* Print Buffer Size */
+#define CONFIG_SYS_MIPS_TIMER_FREQ	(CPU_CLOCK_RATE/2)
+#define CONFIG_SYS_HZ			1000
+#define	CONFIG_SYS_MAXARGS		16		/* max number of command args*/
 
-#define	CFG_LOAD_ADDR		0x80500000	/* default load address	*/
+#define	CONFIG_SYS_LOAD_ADDR		0x80500000	/* default load address	*/
 
-#define CFG_MEMTEST_START	0x80200000
-#define CFG_MEMTEST_END		0x80800000
+#define CONFIG_SYS_MEMTEST_START	0x80200000
+#define CONFIG_SYS_MEMTEST_END		0x80800000
 
 #define	CONFIG_MISC_INIT_R
 
 /*-----------------------------------------------------------------------
  * FLASH and environment organization
  */
-#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks */
-#define CFG_MAX_FLASH_SECT	(35)	/* max number of sectors on one chip */
+#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks */
+#define CONFIG_SYS_MAX_FLASH_SECT	(35)	/* max number of sectors on one chip */
 
 #define PHYS_FLASH_1		0xb0000000 /* Flash Bank #1 */
 
 /* The following #defines are needed to get flash environment right */
-#define	CFG_MONITOR_BASE	TEXT_BASE
-#define	CFG_MONITOR_LEN		(192 << 10)
+#define	CONFIG_SYS_MONITOR_BASE	TEXT_BASE
+#define	CONFIG_SYS_MONITOR_LEN		(192 << 10)
 
-#define CFG_FLASH_BASE		PHYS_FLASH_1
+#define CONFIG_SYS_FLASH_BASE		PHYS_FLASH_1
 
 /* timeout values are in ticks */
-#define CFG_FLASH_ERASE_TOUT	(6 * CFG_HZ) /* Timeout for Flash Erase */
-#define CFG_FLASH_WRITE_TOUT	(6 * CFG_HZ) /* Timeout for Flash Write */
+#define CONFIG_SYS_FLASH_ERASE_TOUT	(6 * CONFIG_SYS_HZ) /* Timeout for Flash Erase */
+#define CONFIG_SYS_FLASH_WRITE_TOUT	(6 * CONFIG_SYS_HZ) /* Timeout for Flash Write */
 
-#define	CFG_ENV_IS_IN_FLASH	1
+#define	CONFIG_ENV_IS_IN_FLASH	1
 
 /* Address and size of Primary Environment Sector	*/
-#define CFG_ENV_ADDR		0xB0008000
-#define CFG_ENV_SIZE		0x4000
+#define CONFIG_ENV_ADDR		0xB0008000
+#define CONFIG_ENV_SIZE		0x4000
 
 #define CONFIG_FLASH_32BIT
 #define CONFIG_NR_DRAM_BANKS	1
@@ -158,16 +158,16 @@
 /*-----------------------------------------------------------------------
  * Cache Configuration
  */
-#define CFG_DCACHE_SIZE		16384
-#define CFG_ICACHE_SIZE		16384
-#define CFG_CACHELINE_SIZE	32
+#define CONFIG_SYS_DCACHE_SIZE		16384
+#define CONFIG_SYS_ICACHE_SIZE		16384
+#define CONFIG_SYS_CACHELINE_SIZE	32
 
 /*
  * Temporary buffer for serial data until the real serial driver
  * is initialised (memtest will destroy this buffer)
  */
-#define CFG_SCONSOLE_ADDR     (CFG_SDRAM_BASE + CFG_INIT_SP_OFFSET - \
-			       CFG_DCACHE_SIZE / 2)
-#define CFG_SCONSOLE_SIZE     (CFG_DCACHE_SIZE / 4)
+#define CONFIG_SYS_SCONSOLE_ADDR     (CONFIG_SYS_SDRAM_BASE + CONFIG_SYS_INIT_SP_OFFSET - \
+			       CONFIG_SYS_DCACHE_SIZE / 2)
+#define CONFIG_SYS_SCONSOLE_SIZE     (CONFIG_SYS_DCACHE_SIZE / 4)
 
 #endif	/* __CONFIG_H */
diff --git a/include/configs/pxa255_idp.h b/include/configs/pxa255_idp.h
index 179ff7ad5..f81103b79 100644
--- a/include/configs/pxa255_idp.h
+++ b/include/configs/pxa255_idp.h
@@ -71,8 +71,8 @@
 /*
  * Size of malloc() pool
  */
-#define CFG_MALLOC_LEN	    (CFG_ENV_SIZE + 128*1024)
-#define CFG_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
+#define CONFIG_SYS_MALLOC_LEN	    (CONFIG_ENV_SIZE + 128*1024)
+#define CONFIG_SYS_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
 
 /*
  * PXA250 IDP memory map information
@@ -219,37 +219,37 @@
 /*
  * Miscellaneous configurable options
  */
-#define CFG_HUSH_PARSER		1
-#define CFG_PROMPT_HUSH_PS2	"> "
+#define CONFIG_SYS_HUSH_PARSER		1
+#define CONFIG_SYS_PROMPT_HUSH_PS2	"> "
 
-#define CFG_LONGHELP				/* undef to save memory		*/
-#ifdef CFG_HUSH_PARSER
-#define CFG_PROMPT		"$ "		/* Monitor Command Prompt */
+#define CONFIG_SYS_LONGHELP				/* undef to save memory		*/
+#ifdef CONFIG_SYS_HUSH_PARSER
+#define CONFIG_SYS_PROMPT		"$ "		/* Monitor Command Prompt */
 #else
-#define CFG_PROMPT		"=> "		/* Monitor Command Prompt */
+#define CONFIG_SYS_PROMPT		"=> "		/* Monitor Command Prompt */
 #endif
-#define CFG_CBSIZE		256		/* Console I/O Buffer Size	*/
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define CFG_MAXARGS		16		/* max number of command args	*/
-#define CFG_BARGSIZE		CFG_CBSIZE	/* Boot Argument Buffer Size	*/
-#define CFG_DEVICE_NULLDEV	1
+#define CONFIG_SYS_CBSIZE		256		/* Console I/O Buffer Size	*/
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS		16		/* max number of command args	*/
+#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
+#define CONFIG_SYS_DEVICE_NULLDEV	1
 
-#define CFG_MEMTEST_START	0xa0400000	/* memtest works on	*/
-#define CFG_MEMTEST_END		0xa0800000	/* 4 ... 8 MB in DRAM	*/
+#define CONFIG_SYS_MEMTEST_START	0xa0400000	/* memtest works on	*/
+#define CONFIG_SYS_MEMTEST_END		0xa0800000	/* 4 ... 8 MB in DRAM	*/
 
-#undef	CFG_CLKS_IN_HZ		/* everything, incl board info, in Hz */
+#undef	CONFIG_SYS_CLKS_IN_HZ		/* everything, incl board info, in Hz */
 
-#define CFG_LOAD_ADDR		0xa0800000	/* default load address */
+#define CONFIG_SYS_LOAD_ADDR		0xa0800000	/* default load address */
 
-#define CFG_HZ			3686400		/* incrementer freq: 3.6864 MHz */
-#define CFG_CPUSPEED		0x161		/* set core clock to 400/200/100 MHz */
+#define CONFIG_SYS_HZ			3686400		/* incrementer freq: 3.6864 MHz */
+#define CONFIG_SYS_CPUSPEED		0x161		/* set core clock to 400/200/100 MHz */
 
 #define RTC	1				/* enable 32KHz osc */
 
 						/* valid baudrates */
-#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
 
-#define CFG_MMC_BASE		0xF0000000
+#define CONFIG_SYS_MMC_BASE		0xF0000000
 
 /*
  * Stack sizes
@@ -281,77 +281,77 @@
 #define PHYS_FLASH_BANK_SIZE	0x02000000 /* 32 MB Banks */
 #define PHYS_FLASH_SECT_SIZE	0x00040000 /* 256 KB sectors (x2) */
 
-#define CFG_DRAM_BASE		0xa0000000
-#define CFG_DRAM_SIZE		0x04000000
+#define CONFIG_SYS_DRAM_BASE		0xa0000000
+#define CONFIG_SYS_DRAM_SIZE		0x04000000
 
-#define CFG_FLASH_BASE		PHYS_FLASH_1
+#define CONFIG_SYS_FLASH_BASE		PHYS_FLASH_1
 
 /*
  * GPIO settings
  */
 
-#define CFG_GAFR0_L_VAL	0x80001005
-#define CFG_GAFR0_U_VAL	0xa5128012
-#define CFG_GAFR1_L_VAL	0x699a9558
-#define CFG_GAFR1_U_VAL	0xaaa5aa6a
-#define CFG_GAFR2_L_VAL	0xaaaaaaaa
-#define CFG_GAFR2_U_VAL	0x2
-#define CFG_GPCR0_VAL	0x1800400
-#define CFG_GPCR1_VAL	0x0
-#define CFG_GPCR2_VAL	0x0
-#define CFG_GPDR0_VAL	0xc1818440
-#define CFG_GPDR1_VAL	0xfcffab82
-#define CFG_GPDR2_VAL	0x1ffff
-#define CFG_GPSR0_VAL	0x8000
-#define CFG_GPSR1_VAL	0x3f0002
-#define CFG_GPSR2_VAL	0x1c000
-
-#define CFG_PSSR_VAL		0x20
+#define CONFIG_SYS_GAFR0_L_VAL	0x80001005
+#define CONFIG_SYS_GAFR0_U_VAL	0xa5128012
+#define CONFIG_SYS_GAFR1_L_VAL	0x699a9558
+#define CONFIG_SYS_GAFR1_U_VAL	0xaaa5aa6a
+#define CONFIG_SYS_GAFR2_L_VAL	0xaaaaaaaa
+#define CONFIG_SYS_GAFR2_U_VAL	0x2
+#define CONFIG_SYS_GPCR0_VAL	0x1800400
+#define CONFIG_SYS_GPCR1_VAL	0x0
+#define CONFIG_SYS_GPCR2_VAL	0x0
+#define CONFIG_SYS_GPDR0_VAL	0xc1818440
+#define CONFIG_SYS_GPDR1_VAL	0xfcffab82
+#define CONFIG_SYS_GPDR2_VAL	0x1ffff
+#define CONFIG_SYS_GPSR0_VAL	0x8000
+#define CONFIG_SYS_GPSR1_VAL	0x3f0002
+#define CONFIG_SYS_GPSR2_VAL	0x1c000
+
+#define CONFIG_SYS_PSSR_VAL		0x20
 
 /*
  * Memory settings
  */
-#define CFG_MSC0_VAL		0x29DCA4D2
-#define CFG_MSC1_VAL		0x43AC494C
-#define CFG_MSC2_VAL		0x39D449D4
-#define CFG_MDCNFG_VAL		0x090009C9
-#define CFG_MDREFR_VAL		0x0085C017
-#define CFG_MDMRS_VAL		0x00220022
+#define CONFIG_SYS_MSC0_VAL		0x29DCA4D2
+#define CONFIG_SYS_MSC1_VAL		0x43AC494C
+#define CONFIG_SYS_MSC2_VAL		0x39D449D4
+#define CONFIG_SYS_MDCNFG_VAL		0x090009C9
+#define CONFIG_SYS_MDREFR_VAL		0x0085C017
+#define CONFIG_SYS_MDMRS_VAL		0x00220022
 
 /*
  * PCMCIA and CF Interfaces
  */
-#define CFG_MECR_VAL		0x00000003
-#define CFG_MCMEM0_VAL		0x00014405
-#define CFG_MCMEM1_VAL		0x00014405
-#define CFG_MCATT0_VAL		0x00014405
-#define CFG_MCATT1_VAL		0x00014405
-#define CFG_MCIO0_VAL		0x00014405
-#define CFG_MCIO1_VAL		0x00014405
+#define CONFIG_SYS_MECR_VAL		0x00000003
+#define CONFIG_SYS_MCMEM0_VAL		0x00014405
+#define CONFIG_SYS_MCMEM1_VAL		0x00014405
+#define CONFIG_SYS_MCATT0_VAL		0x00014405
+#define CONFIG_SYS_MCATT1_VAL		0x00014405
+#define CONFIG_SYS_MCIO0_VAL		0x00014405
+#define CONFIG_SYS_MCIO1_VAL		0x00014405
 
 /*
  * FLASH and environment organization
  */
-#define CFG_FLASH_CFI
+#define CONFIG_SYS_FLASH_CFI
 #define CONFIG_FLASH_CFI_DRIVER	1
 
-#define CFG_MONITOR_BASE	0
-#define CFG_MONITOR_LEN		PHYS_FLASH_SECT_SIZE
+#define CONFIG_SYS_MONITOR_BASE	0
+#define CONFIG_SYS_MONITOR_LEN		PHYS_FLASH_SECT_SIZE
 
-#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
-#define CFG_MAX_FLASH_SECT	128  /* max number of sectors on one chip    */
+#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
+#define CONFIG_SYS_MAX_FLASH_SECT	128  /* max number of sectors on one chip    */
 
-#define CFG_FLASH_USE_BUFFER_WRITE	1
+#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE	1
 
 /* timeout values are in ticks */
-#define CFG_FLASH_ERASE_TOUT	(25*CFG_HZ) /* Timeout for Flash Erase */
-#define CFG_FLASH_WRITE_TOUT	(25*CFG_HZ) /* Timeout for Flash Write */
+#define CONFIG_SYS_FLASH_ERASE_TOUT	(25*CONFIG_SYS_HZ) /* Timeout for Flash Erase */
+#define CONFIG_SYS_FLASH_WRITE_TOUT	(25*CONFIG_SYS_HZ) /* Timeout for Flash Write */
 
 /* put cfg at end of flash for now */
-#define CFG_ENV_IS_IN_FLASH	1
+#define CONFIG_ENV_IS_IN_FLASH	1
  /* Addr of Environment Sector	*/
-#define CFG_ENV_ADDR		(PHYS_FLASH_1 + PHYS_FLASH_SIZE - 0x40000)
-#define CFG_ENV_SIZE		PHYS_FLASH_SECT_SIZE	/* Total Size of Environment Sector	*/
-#define	CFG_ENV_SECT_SIZE	(PHYS_FLASH_SECT_SIZE / 16)
+#define CONFIG_ENV_ADDR		(PHYS_FLASH_1 + PHYS_FLASH_SIZE - 0x40000)
+#define CONFIG_ENV_SIZE		PHYS_FLASH_SECT_SIZE	/* Total Size of Environment Sector	*/
+#define	CONFIG_ENV_SECT_SIZE	(PHYS_FLASH_SECT_SIZE / 16)
 
 #endif	/* __CONFIG_H */
diff --git a/include/configs/qemu-mips.h b/include/configs/qemu-mips.h
index 19e627b61..f028d1ac6 100644
--- a/include/configs/qemu-mips.h
+++ b/include/configs/qemu-mips.h
@@ -41,7 +41,7 @@
 #define CONFIG_BAUDRATE		115200
 
 /* valid baudrates */
-#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
 
 #define CONFIG_TIMESTAMP		/* Print image info with timestamp */
 #undef CONFIG_BOOTARGS
@@ -79,81 +79,81 @@
 #define CONFIG_DRIVER_NE2000
 #define CONFIG_DRIVER_NE2000_BASE	(0xb4000300)
 
-#define CFG_NS16550
-#define CFG_NS16550_SERIAL
-#define CFG_NS16550_REG_SIZE	1
-#define CFG_NS16550_CLK		115200
-#define CFG_NS16550_COM1	(0xb40003f8)
+#define CONFIG_SYS_NS16550
+#define CONFIG_SYS_NS16550_SERIAL
+#define CONFIG_SYS_NS16550_REG_SIZE	1
+#define CONFIG_SYS_NS16550_CLK		115200
+#define CONFIG_SYS_NS16550_COM1	(0xb40003f8)
 #define CONFIG_CONS_INDEX	1
 
 #define CONFIG_CMD_IDE
 #define CONFIG_DOS_PARTITION
 
-#define CFG_IDE_MAXBUS		2
-#define CFG_ATA_IDE0_OFFSET	(0x1f0)
-#define CFG_ATA_IDE1_OFFSET	(0x170)
-#define CFG_ATA_DATA_OFFSET	(0)
-#define CFG_ATA_REG_OFFSET	(0)
-#define CFG_ATA_BASE_ADDR	(0xb4000000)
+#define CONFIG_SYS_IDE_MAXBUS		2
+#define CONFIG_SYS_ATA_IDE0_OFFSET	(0x1f0)
+#define CONFIG_SYS_ATA_IDE1_OFFSET	(0x170)
+#define CONFIG_SYS_ATA_DATA_OFFSET	(0)
+#define CONFIG_SYS_ATA_REG_OFFSET	(0)
+#define CONFIG_SYS_ATA_BASE_ADDR	(0xb4000000)
 
-#define CFG_IDE_MAXDEVICE	(4)
+#define CONFIG_SYS_IDE_MAXDEVICE	(4)
 
 /*
  * Miscellaneous configurable options
  */
-#define CFG_LONGHELP				/* undef to save memory */
+#define CONFIG_SYS_LONGHELP				/* undef to save memory */
 
-#define CFG_PROMPT		"qemu-mips # "	/* Monitor Command Prompt */
+#define CONFIG_SYS_PROMPT		"qemu-mips # "	/* Monitor Command Prompt */
 
 #define CONFIG_AUTO_COMPLETE
 #define CONFIG_CMDLINE_EDITING
-#define CFG_HUSH_PARSER
-#define CFG_PROMPT_HUSH_PS2	"> "
+#define CONFIG_SYS_HUSH_PARSER
+#define CONFIG_SYS_PROMPT_HUSH_PS2	"> "
 
-#define CFG_CBSIZE		256		/* Console I/O Buffer Size */
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16)  /* Print Buffer Size */
-#define CFG_MAXARGS		16		/* max number of command args */
+#define CONFIG_SYS_CBSIZE		256		/* Console I/O Buffer Size */
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)  /* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS		16		/* max number of command args */
 
-#define CFG_MALLOC_LEN		128*1024
+#define CONFIG_SYS_MALLOC_LEN		128*1024
 
-#define CFG_BOOTPARAMS_LEN	128*1024
+#define CONFIG_SYS_BOOTPARAMS_LEN	128*1024
 
-#define CFG_MHZ			132
+#define CONFIG_SYS_MHZ			132
 
-#define CFG_MIPS_TIMER_FREQ	(CFG_MHZ * 1000000)
+#define CONFIG_SYS_MIPS_TIMER_FREQ	(CONFIG_SYS_MHZ * 1000000)
 
-#define CFG_HZ			1000
+#define CONFIG_SYS_HZ			1000
 
-#define CFG_SDRAM_BASE		0x80000000	/* Cached addr */
+#define CONFIG_SYS_SDRAM_BASE		0x80000000	/* Cached addr */
 
-#define CFG_LOAD_ADDR		0x81000000	/* default load address */
+#define CONFIG_SYS_LOAD_ADDR		0x81000000	/* default load address */
 
-#define CFG_MEMTEST_START	0x80100000
-#define CFG_MEMTEST_END		0x80800000
+#define CONFIG_SYS_MEMTEST_START	0x80100000
+#define CONFIG_SYS_MEMTEST_END		0x80800000
 
 /*-----------------------------------------------------------------------
  * FLASH and environment organization
  */
 
 /* The following #defines are needed to get flash environment right */
-#define CFG_MONITOR_BASE	TEXT_BASE
-#define CFG_MONITOR_LEN		(192 << 10)
+#define CONFIG_SYS_MONITOR_BASE	TEXT_BASE
+#define CONFIG_SYS_MONITOR_LEN		(192 << 10)
 
-#define CFG_INIT_SP_OFFSET	0x400000
+#define CONFIG_SYS_INIT_SP_OFFSET	0x400000
 
 /* We boot from this flash, selected with dip switch */
-#define CFG_FLASH_BASE		0xbfc00000
-#define CFG_MAX_FLASH_BANKS	1
-#define CFG_MAX_FLASH_SECT	128
-#define CFG_FLASH_CFI		1	/* Flash memory is CFI compliant */
+#define CONFIG_SYS_FLASH_BASE		0xbfc00000
+#define CONFIG_SYS_MAX_FLASH_BANKS	1
+#define CONFIG_SYS_MAX_FLASH_SECT	128
+#define CONFIG_SYS_FLASH_CFI		1	/* Flash memory is CFI compliant */
 #define CONFIG_FLASH_CFI_DRIVER	1
-#define CFG_FLASH_USE_BUFFER_WRITE	1
+#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE	1
 
-#define CFG_ENV_IS_IN_FLASH	1
-#define CFG_ENV_ADDR		(CFG_FLASH_BASE + 0x40000)
+#define CONFIG_ENV_IS_IN_FLASH	1
+#define CONFIG_ENV_ADDR		(CONFIG_SYS_FLASH_BASE + 0x40000)
 
 /* Address and size of Primary Environment Sector */
-#define CFG_ENV_SIZE		0x8000
+#define CONFIG_ENV_SIZE		0x8000
 
 #define CONFIG_ENV_OVERWRITE	1
 
@@ -166,8 +166,8 @@
 /*-----------------------------------------------------------------------
  * Cache Configuration
  */
-#define CFG_DCACHE_SIZE		16384
-#define CFG_ICACHE_SIZE		16384
-#define CFG_CACHELINE_SIZE	32
+#define CONFIG_SYS_DCACHE_SIZE		16384
+#define CONFIG_SYS_ICACHE_SIZE		16384
+#define CONFIG_SYS_CACHELINE_SIZE	32
 
 #endif /* __CONFIG_H */
diff --git a/include/configs/quad100hd.h b/include/configs/quad100hd.h
index d464734da..0f7fca38d 100644
--- a/include/configs/quad100hd.h
+++ b/include/configs/quad100hd.h
@@ -42,14 +42,15 @@
 #define PLLMR1_DEFAULT		PLLMR1_266_133_66 /* no PCI */
 
 /* the environment is in the EEPROM by default */
-#define CFG_ENV_IS_IN_EEPROM
-#undef CFG_ENV_IS_IN_FLASH
+#define CONFIG_ENV_IS_IN_EEPROM
+#undef CONFIG_ENV_IS_IN_FLASH
 
+#define CONFIG_PPC4xx_EMAC
 #define CONFIG_NET_MULTI	1
 #define CONFIG_HAS_ETH1		1
 #define CONFIG_MII		1	/* MII PHY management		*/
 #define CONFIG_PHY_ADDR		0x01	/* PHY address			*/
-#define CFG_RX_ETH_BUFFER	16	/* Number of ethernet rx buffers & descriptors */
+#define CONFIG_SYS_RX_ETH_BUFFER	16	/* Number of ethernet rx buffers & descriptors */
 #define CONFIG_PHY_RESET	1
 #define CONFIG_PHY_RESET_DELAY	300	/* PHY RESET recovery delay	*/
 
@@ -82,62 +83,61 @@
  * SDRAM configuration (please see cpu/ppc/sdram.[ch])
  */
 #define CONFIG_SDRAM_BANK0  1
-#define CFG_SDRAM_SIZE      0x02000000      /* 32 MB */
 
 /* FIX! SDRAM timings used in datasheet */
-#define CFG_SDRAM_CL            3       /* CAS latency */
-#define CFG_SDRAM_tRP           20      /* PRECHARGE command period */
-#define CFG_SDRAM_tRC           66      /* ACTIVE-to-ACTIVE command period */
-#define CFG_SDRAM_tRCD          20      /* ACTIVE-to-READ delay */
-#define CFG_SDRAM_tRFC          66      /* Auto refresh period */
+#define CONFIG_SYS_SDRAM_CL            3       /* CAS latency */
+#define CONFIG_SYS_SDRAM_tRP           20      /* PRECHARGE command period */
+#define CONFIG_SYS_SDRAM_tRC           66      /* ACTIVE-to-ACTIVE command period */
+#define CONFIG_SYS_SDRAM_tRCD          20      /* ACTIVE-to-READ delay */
+#define CONFIG_SYS_SDRAM_tRFC          66      /* Auto refresh period */
 
 /*
  * JFFS2
  */
-#define CFG_JFFS2_FIRST_BANK    0
-#ifdef  CFG_KERNEL_IN_JFFS2
-#define CFG_JFFS2_FIRST_SECTOR  0   /* JFFS starts at block 0 */
+#define CONFIG_SYS_JFFS2_FIRST_BANK    0
+#ifdef  CONFIG_SYS_KERNEL_IN_JFFS2
+#define CONFIG_SYS_JFFS2_FIRST_SECTOR  0   /* JFFS starts at block 0 */
 #else /* kernel not in JFFS */
-#define CFG_JFFS2_FIRST_SECTOR  8   /* block 0-7 is kernel (1MB = 8 sectors) */
+#define CONFIG_SYS_JFFS2_FIRST_SECTOR  8   /* block 0-7 is kernel (1MB = 8 sectors) */
 #endif
-#define CFG_JFFS2_NUM_BANKS     1
+#define CONFIG_SYS_JFFS2_NUM_BANKS     1
 
 /*-----------------------------------------------------------------------
  * Serial Port
  *----------------------------------------------------------------------*/
-#undef	CFG_EXT_SERIAL_CLOCK			/* external serial clock */
-#define CFG_BASE_BAUD		691200
+#undef	CONFIG_SYS_EXT_SERIAL_CLOCK			/* external serial clock */
+#define CONFIG_SYS_BASE_BAUD		691200
 #define CONFIG_BAUDRATE		115200
 #define CONFIG_SERIAL_MULTI
 
 /* The following table includes the supported baudrates */
-#define CFG_BAUDRATE_TABLE	\
+#define CONFIG_SYS_BAUDRATE_TABLE	\
 	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400}
 
 /*-----------------------------------------------------------------------
  * Miscellaneous configurable options
  *----------------------------------------------------------------------*/
-#define CFG_LONGHELP			/* undef to save memory		*/
-#define CFG_PROMPT	        "=> "	/* Monitor Command Prompt	*/
+#define CONFIG_SYS_LONGHELP			/* undef to save memory		*/
+#define CONFIG_SYS_PROMPT	        "=> "	/* Monitor Command Prompt	*/
 #if defined(CONFIG_CMD_KGDB)
-#define CFG_CBSIZE	        1024	/* Console I/O Buffer Size	*/
+#define CONFIG_SYS_CBSIZE	        1024	/* Console I/O Buffer Size	*/
 #else
-#define CFG_CBSIZE	        256	/* Console I/O Buffer Size	*/
+#define CONFIG_SYS_CBSIZE	        256	/* Console I/O Buffer Size	*/
 #endif
-#define CFG_PBSIZE              (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define CFG_MAXARGS	        16	/* max number of command args	*/
-#define CFG_BARGSIZE	        CFG_CBSIZE /* Boot Argument Buffer Size	*/
+#define CONFIG_SYS_PBSIZE              (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS	        16	/* max number of command args	*/
+#define CONFIG_SYS_BARGSIZE	        CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size	*/
 
-#define CFG_MEMTEST_START	0x0400000 /* memtest works on		*/
-#define CFG_MEMTEST_END		0x0C00000 /* 4 ... 12 MB in DRAM	*/
+#define CONFIG_SYS_MEMTEST_START	0x0400000 /* memtest works on		*/
+#define CONFIG_SYS_MEMTEST_END		0x0C00000 /* 4 ... 12 MB in DRAM	*/
 
-#define CFG_LOAD_ADDR		0x100000  /* default load address	*/
-#define CFG_EXTBDINFO		1	/* To use extended board_info (bd_t) */
+#define CONFIG_SYS_LOAD_ADDR		0x100000  /* default load address	*/
+#define CONFIG_SYS_EXTBDINFO		1	/* To use extended board_info (bd_t) */
 
-#define CFG_HZ		        1000	/* decrementer freq: 1 ms ticks	*/
+#define CONFIG_SYS_HZ		        1000	/* decrementer freq: 1 ms ticks	*/
 
 #define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
-#define CFG_LOADS_BAUD_CHANGE	1	/* allow baudrate change	*/
+#define CONFIG_SYS_LOADS_BAUD_CHANGE	1	/* allow baudrate change	*/
 
 #define CONFIG_CMDLINE_EDITING	1	/* add command line history	*/
 #define CONFIG_LOOPW            1       /* enable loopw command         */
@@ -150,82 +150,82 @@
  *----------------------------------------------------------------------*/
 #define CONFIG_HARD_I2C		1		/* I2C with hardware support	*/
 #undef	CONFIG_SOFT_I2C				/* I2C bit-banged		*/
-#define CFG_I2C_SPEED		400000		/* I2C speed and slave address	*/
-#define CFG_I2C_SLAVE		0x7F
+#define CONFIG_SYS_I2C_SPEED		400000		/* I2C speed and slave address	*/
+#define CONFIG_SYS_I2C_SLAVE		0x7F
 
-#define CFG_I2C_EEPROM_ADDR	0x50		/* base address */
-#define CFG_I2C_EEPROM_ADDR_LEN	2		/* bytes of address */
+#define CONFIG_SYS_I2C_EEPROM_ADDR	0x50		/* base address */
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN	2		/* bytes of address */
 
-#define CFG_EEPROM_PAGE_WRITE_BITS	5	/* 8 byte write page size */
-#define CFG_EEPROM_PAGE_WRITE_DELAY_MS	10	/* and takes up to 10 msec */
-#define CFG_EEPROM_SIZE			0x2000
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS	5	/* 8 byte write page size */
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	10	/* and takes up to 10 msec */
+#define CONFIG_SYS_EEPROM_SIZE			0x2000
 
 /*-----------------------------------------------------------------------
  * Start addresses for the final memory configuration
  * (Set up by the startup code)
- * Please note that CFG_SDRAM_BASE _must_ start at 0
+ * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
  */
-#define CFG_SDRAM_BASE		0x00000000
-#define CFG_FLASH_BASE		0xFFC00000
-#define CFG_MONITOR_LEN		(256 * 1024)	/* Reserve 256 kB for Monitor	*/
-#define CFG_MALLOC_LEN		(128 * 1024)	/* Reserve 128 kB for malloc()	*/
-#define CFG_MONITOR_BASE	(TEXT_BASE)
+#define CONFIG_SYS_SDRAM_BASE		0x00000000
+#define CONFIG_SYS_FLASH_BASE		0xFFC00000
+#define CONFIG_SYS_MONITOR_LEN		(256 * 1024)	/* Reserve 256 kB for Monitor	*/
+#define CONFIG_SYS_MALLOC_LEN		(128 * 1024)	/* Reserve 128 kB for malloc()	*/
+#define CONFIG_SYS_MONITOR_BASE	(TEXT_BASE)
 
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
+#define CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
 
 /*-----------------------------------------------------------------------
  * FLASH organization
  */
-#define CFG_FLASH_CFI			/* The flash is CFI compatible	*/
+#define CONFIG_SYS_FLASH_CFI			/* The flash is CFI compatible	*/
 #define	CONFIG_FLASH_CFI_DRIVER
 
-#define CFG_FLASH_BANKS_LIST	{ CFG_FLASH_BASE }
+#define CONFIG_SYS_FLASH_BANKS_LIST	{ CONFIG_SYS_FLASH_BASE }
 
-#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks	*/
-#define CFG_MAX_FLASH_SECT	128	/* max number of sectors on one chip */
+#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks	*/
+#define CONFIG_SYS_MAX_FLASH_SECT	128	/* max number of sectors on one chip */
 
-#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms) */
-#define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms) */
+#define CONFIG_SYS_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms) */
+#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms) */
 
-#define CFG_FLASH_USE_BUFFER_WRITE 1	/* use buffered writes (20x faster) */
-#define CFG_FLASH_INCREMENT      0       /* there is only one bank         */
+#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1	/* use buffered writes (20x faster) */
+#define CONFIG_SYS_FLASH_INCREMENT      0       /* there is only one bank         */
 
-#define CFG_FLASH_EMPTY_INFO		/* print 'E' for empty sector on flinfo */
-#define CFG_FLASH_QUIET_TEST	1	/* don't warn upon unknown flash */
+#define CONFIG_SYS_FLASH_EMPTY_INFO		/* print 'E' for empty sector on flinfo */
+#define CONFIG_SYS_FLASH_QUIET_TEST	1	/* don't warn upon unknown flash */
 
-#ifdef CFG_ENV_IS_IN_FLASH
-#define CFG_ENV_SECT_SIZE	0x10000	/* size of one complete sector	*/
+#ifdef CONFIG_ENV_IS_IN_FLASH
+#define CONFIG_ENV_SECT_SIZE	0x10000	/* size of one complete sector	*/
 /* the environment is located before u-boot */
-#define CFG_ENV_ADDR		(TEXT_BASE - CFG_ENV_SECT_SIZE)
+#define CONFIG_ENV_ADDR		(TEXT_BASE - CONFIG_ENV_SECT_SIZE)
 
 /* Address and size of Redundant Environment Sector	*/
-#define CFG_ENV_ADDR_REDUND	(CFG_ENV_ADDR - CFG_ENV_SECT_SIZE)
-#define CFG_ENV_SIZE_REDUND	(CFG_ENV_SECT_SIZE)
+#define CONFIG_ENV_ADDR_REDUND	(CONFIG_ENV_ADDR - CONFIG_ENV_SECT_SIZE)
+#define CONFIG_ENV_SIZE_REDUND	(CONFIG_ENV_SECT_SIZE)
 #endif
 
-#ifdef CFG_ENV_IS_IN_EEPROM
-#define CFG_ENV_SIZE		0x400		/* Size of Environment vars */
-#define CFG_ENV_OFFSET		0x00000000
-#define CFG_ENABLE_CRC_16	1       /* Intrinsyc formatting used crc16 */
+#ifdef CONFIG_ENV_IS_IN_EEPROM
+#define CONFIG_ENV_SIZE		0x400		/* Size of Environment vars */
+#define CONFIG_ENV_OFFSET		0x00000000
+#define CONFIG_SYS_ENABLE_CRC_16	1       /* Intrinsyc formatting used crc16 */
 #endif
 
 /* partly from PPCBoot */
 /* NAND */
 #define CONFIG_NAND
 #ifdef CONFIG_NAND
-#define CFG_NAND_BASE   0x60000000
-#define CFG_NAND_CS	10   /* our CS is GPIO10 */
-#define CFG_NAND_RDY	23   /* our RDY is GPIO23 */
-#define CFG_NAND_CE	24   /* our CE is GPIO24  */
-#define CFG_NAND_CLE	31   /* our CLE is GPIO31 */
-#define CFG_NAND_ALE	30   /* our ALE is GPIO30 */
+#define CONFIG_SYS_NAND_BASE   0x60000000
+#define CONFIG_SYS_NAND_CS	10   /* our CS is GPIO10 */
+#define CONFIG_SYS_NAND_RDY	23   /* our RDY is GPIO23 */
+#define CONFIG_SYS_NAND_CE	24   /* our CE is GPIO24  */
+#define CONFIG_SYS_NAND_CLE	31   /* our CLE is GPIO31 */
+#define CONFIG_SYS_NAND_ALE	30   /* our ALE is GPIO30 */
 #define NAND_MAX_CHIPS	1
-#define CFG_MAX_NAND_DEVICE	1
+#define CONFIG_SYS_MAX_NAND_DEVICE	1
 #endif
 
 /*-----------------------------------------------------------------------
@@ -233,17 +233,17 @@
  */
 /* use on chip memory (OCM) for temperary stack until sdram is tested */
 /* see ./cpu/ppc4xx/start.S */
-#define CFG_TEMP_STACK_OCM	1
+#define CONFIG_SYS_TEMP_STACK_OCM	1
 
 /* On Chip Memory location */
-#define CFG_OCM_DATA_ADDR	0xF8000000
-#define CFG_OCM_DATA_SIZE	0x1000
-#define CFG_INIT_RAM_ADDR	CFG_OCM_DATA_ADDR /* inside of OCM		*/
-#define CFG_INIT_RAM_END	CFG_OCM_DATA_SIZE /* End of used area in RAM	*/
+#define CONFIG_SYS_OCM_DATA_ADDR	0xF8000000
+#define CONFIG_SYS_OCM_DATA_SIZE	0x1000
+#define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_OCM_DATA_ADDR /* inside of OCM		*/
+#define CONFIG_SYS_INIT_RAM_END	CONFIG_SYS_OCM_DATA_SIZE /* End of used area in RAM	*/
 
-#define CFG_GBL_DATA_SIZE	128  /* size in bytes reserved for initial data */
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP_OFFSET      CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_GBL_DATA_SIZE	128  /* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET      CONFIG_SYS_GBL_DATA_OFFSET
 
 /*-----------------------------------------------------------------------
  * External Bus Controller (EBC) Setup
@@ -251,17 +251,17 @@
  */
 
 /* see ./cpu/ppc4xx/cpu_init.c ./cpu/ppc4xx/ndfc.c */
-#define CFG_EBC_PB0AP		0x04002480
+#define CONFIG_SYS_EBC_PB0AP		0x04002480
 /* AMD NOR flash - this corresponds to FLASH_BASE so may be correct */
-#define CFG_EBC_PB0CR		0xFFC5A000
-#define CFG_EBC_PB1AP           0x04005480
-#define CFG_EBC_PB1CR           0x60018000
-#define CFG_EBC_PB2AP           0x00000000
-#define CFG_EBC_PB2CR           0x00000000
-#define CFG_EBC_PB3AP           0x00000000
-#define CFG_EBC_PB3CR           0x00000000
-#define CFG_EBC_PB4AP           0x00000000
-#define CFG_EBC_PB4CR           0x00000000
+#define CONFIG_SYS_EBC_PB0CR		0xFFC5A000
+#define CONFIG_SYS_EBC_PB1AP           0x04005480
+#define CONFIG_SYS_EBC_PB1CR           0x60018000
+#define CONFIG_SYS_EBC_PB2AP           0x00000000
+#define CONFIG_SYS_EBC_PB2CR           0x00000000
+#define CONFIG_SYS_EBC_PB3AP           0x00000000
+#define CONFIG_SYS_EBC_PB3CR           0x00000000
+#define CONFIG_SYS_EBC_PB4AP           0x00000000
+#define CONFIG_SYS_EBC_PB4CR           0x00000000
 
 /*-----------------------------------------------------------------------
  * Definitions for GPIO setup (PPC405EP specific)
@@ -269,14 +269,14 @@
  * Taken in part from PPCBoot board/icecube/icecube.h
  */
 /* see ./cpu/ppc4xx/cpu_init.c ./cpu/ppc4xx/start.S */
-#define CFG_GPIO0_OSRH		0x55555550
-#define CFG_GPIO0_OSRL		0x00000110
-#define CFG_GPIO0_ISR1H		0x00000000
-#define CFG_GPIO0_ISR1L		0x15555445
-#define CFG_GPIO0_TSRH		0x00000000
-#define CFG_GPIO0_TSRL		0x00000000
-#define CFG_GPIO0_TCR		0xFFFF8097
-#define CFG_GPIO0_ODR		0x00000000
+#define CONFIG_SYS_GPIO0_OSRH		0x55555550
+#define CONFIG_SYS_GPIO0_OSRL		0x00000110
+#define CONFIG_SYS_GPIO0_ISR1H		0x00000000
+#define CONFIG_SYS_GPIO0_ISR1L		0x15555445
+#define CONFIG_SYS_GPIO0_TSRH		0x00000000
+#define CONFIG_SYS_GPIO0_TSRL		0x00000000
+#define CONFIG_SYS_GPIO0_TCR		0xFFFF8097
+#define CONFIG_SYS_GPIO0_ODR		0x00000000
 
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400		/* speed to run kgdb serial port */
diff --git a/include/configs/quantum.h b/include/configs/quantum.h
index 34a1ea6e2..e440e93a5 100644
--- a/include/configs/quantum.h
+++ b/include/configs/quantum.h
@@ -72,10 +72,10 @@
 /*
  * Select the more full-featured memory test (Barr embedded systems)
  */
-#define CFG_ALT_MEMTEST
+#define CONFIG_SYS_ALT_MEMTEST
 
 #define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
-#undef	CFG_LOADS_BAUD_CHANGE		/* don't allow baudrate change	*/
+#undef	CONFIG_SYS_LOADS_BAUD_CHANGE		/* don't allow baudrate change	*/
 
 
 /* M48T02 Paralled access timekeeper with same interface as the M48T35A*/
@@ -88,8 +88,8 @@
 #endif
 
 /*  NVRAM and RTC */
-#define CFG_NVRAM_BASE_ADDR 0xFA000000
-#define CFG_NVRAM_SIZE 2048
+#define CONFIG_SYS_NVRAM_BASE_ADDR 0xFA000000
+#define CONFIG_SYS_NVRAM_SIZE 2048
 
 
 /*
@@ -122,25 +122,25 @@
 /*
  * Miscellaneous configurable options
  */
-#define CFG_LONGHELP			/* undef to save memory		*/
-#define CFG_PROMPT	"=> "		/* Monitor Command Prompt	*/
+#define CONFIG_SYS_LONGHELP			/* undef to save memory		*/
+#define CONFIG_SYS_PROMPT	"=> "		/* Monitor Command Prompt	*/
 #if defined(CONFIG_CMD_KGDB)
-#define CFG_CBSIZE	1024		/* Console I/O Buffer Size	*/
+#define CONFIG_SYS_CBSIZE	1024		/* Console I/O Buffer Size	*/
 #else
-#define CFG_CBSIZE	256		/* Console I/O Buffer Size	*/
+#define CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size	*/
 #endif
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define CFG_MAXARGS	16		/* max number of command args	*/
-#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS	16		/* max number of command args	*/
+#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
 
-#define CFG_MEMTEST_START	0x00040000	/* memtest works on	*/
-#define CFG_MEMTEST_END		0x01f00000	/* 256K ... 15 MB in DRAM	*/
+#define CONFIG_SYS_MEMTEST_START	0x00040000	/* memtest works on	*/
+#define CONFIG_SYS_MEMTEST_END		0x01f00000	/* 256K ... 15 MB in DRAM	*/
 
-#define CFG_LOAD_ADDR		0x100000	/* default load address */
+#define CONFIG_SYS_LOAD_ADDR		0x100000	/* default load address */
 
-#define CFG_HZ		1000		/* decrementer freq: 1 ms ticks */
+#define CONFIG_SYS_HZ		1000		/* decrementer freq: 1 ms ticks */
 
-#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
 
 /*
  * Low Level Configuration Settings
@@ -150,24 +150,24 @@
 /*-----------------------------------------------------------------------
  * Internal Memory Mapped Register
  */
-#define CFG_IMMR		0xFA200000
+#define CONFIG_SYS_IMMR		0xFA200000
 
 /*-----------------------------------------------------------------------
  * Definitions for initial stack pointer and data area (in DPRAM)
  */
-#define CFG_INIT_RAM_ADDR	CFG_IMMR
-#define CFG_INIT_RAM_END	0x2F00	/* End of used area in DPRAM	*/
-#define CFG_GBL_DATA_SIZE	64  /* size in bytes reserved for initial data */
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_IMMR
+#define CONFIG_SYS_INIT_RAM_END	0x2F00	/* End of used area in DPRAM	*/
+#define CONFIG_SYS_GBL_DATA_SIZE	64  /* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
 /*-----------------------------------------------------------------------
  * Start addresses for the final memory configuration
  * (Set up by the startup code)
- * Please note that CFG_SDRAM_BASE _must_ start at 0
+ * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
  */
-#define CFG_SDRAM_BASE		0x00000000
-#define CFG_FLASH_BASE	0xFF000000
+#define CONFIG_SYS_SDRAM_BASE		0x00000000
+#define CONFIG_SYS_FLASH_BASE	0xFF000000
 
 #if 1
     #define CONFIG_FLASH_CFI_DRIVER
@@ -177,64 +177,64 @@
 
 
 #ifdef CONFIG_FLASH_CFI_DRIVER
-    #define CFG_FLASH_CFI 1
-    #undef CFG_FLASH_USE_BUFFER_WRITE
-    #define CFG_FLASH_BANKS_LIST {CFG_FLASH_BASE}
+    #define CONFIG_SYS_FLASH_CFI 1
+    #undef CONFIG_SYS_FLASH_USE_BUFFER_WRITE
+    #define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE}
 #endif
 
-/*%%% #define CFG_FLASH_BASE		0xFFF00000 */
+/*%%% #define CONFIG_SYS_FLASH_BASE		0xFFF00000 */
 #if defined(DEBUG) || defined(CONFIG_CMD_IDE)
-#define CFG_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor	*/
+#define CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor	*/
 #else
-#define CFG_MONITOR_LEN		(128 << 10)	/* Reserve 128 kB for Monitor	*/
+#define CONFIG_SYS_MONITOR_LEN		(128 << 10)	/* Reserve 128 kB for Monitor	*/
 #endif
-#define CFG_MONITOR_BASE	0xFFF00000
-/*%%% #define CFG_MONITOR_BASE	CFG_FLASH_BASE */
-#define CFG_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/
+#define CONFIG_SYS_MONITOR_BASE	0xFFF00000
+/*%%% #define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_FLASH_BASE */
+#define CONFIG_SYS_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/
 
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
+#define CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
 
 /*-----------------------------------------------------------------------
  * FLASH organization
  */
-#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
-#define CFG_MAX_FLASH_SECT	512	/* max number of sectors on one chip */
+#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
+#define CONFIG_SYS_MAX_FLASH_SECT	512	/* max number of sectors on one chip */
 
-#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
-#define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
+#define CONFIG_SYS_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
+#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
 
-#define CFG_ENV_IS_IN_FLASH	1
-#define CFG_ENV_OFFSET	    0x00F40000	/*   Offset   of Environment Sector	absolute address 0xfff40000*/
-#define CFG_ENV_SECT_SIZE	0x40000	/* Total Size of Environment Sector	*/
-#define CFG_ENV_SIZE		CFG_ENV_SECT_SIZE
-#define CFG_ENV_ADDR		(CFG_FLASH_BASE + CFG_ENV_OFFSET)
+#define CONFIG_ENV_IS_IN_FLASH	1
+#define CONFIG_ENV_OFFSET	    0x00F40000	/*   Offset   of Environment Sector	absolute address 0xfff40000*/
+#define CONFIG_ENV_SECT_SIZE	0x40000	/* Total Size of Environment Sector	*/
+#define CONFIG_ENV_SIZE		CONFIG_ENV_SECT_SIZE
+#define CONFIG_ENV_ADDR		(CONFIG_SYS_FLASH_BASE + CONFIG_ENV_OFFSET)
 
 /* Address and size of Redundant Environment Sector	*/
-#define CFG_ENV_OFFSET_REDUND	(CFG_ENV_OFFSET+CFG_ENV_SIZE)
-#define CFG_ENV_SIZE_REDUND	(CFG_ENV_SIZE)
+#define CONFIG_ENV_OFFSET_REDUND	(CONFIG_ENV_OFFSET+CONFIG_ENV_SIZE)
+#define CONFIG_ENV_SIZE_REDUND	(CONFIG_ENV_SIZE)
 
 /* FPGA */
 #define CONFIG_MISC_INIT_R
-#define CFG_FPGA_SPARTAN2
-#define CFG_FPGA_PROG_FEEDBACK
+#define CONFIG_SYS_FPGA_SPARTAN2
+#define CONFIG_SYS_FPGA_PROG_FEEDBACK
 
 
 /*-----------------------------------------------------------------------
  * Reset address
  */
-#define CFG_RESET_ADDRESS	((ulong)((((immap_t *)CFG_IMMR)->im_clkrst.res)))
+#define CONFIG_SYS_RESET_ADDRESS	((ulong)((((immap_t *)CONFIG_SYS_IMMR)->im_clkrst.res)))
 
 /*-----------------------------------------------------------------------
  * Cache Configuration
  */
-#define CFG_CACHELINE_SIZE	16	/* For all MPC8xx CPUs			*/
+#define CONFIG_SYS_CACHELINE_SIZE	16	/* For all MPC8xx CPUs			*/
 #if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT	4	/* log base 2 of the above value	*/
+#define CONFIG_SYS_CACHELINE_SHIFT	4	/* log base 2 of the above value	*/
 #endif
 
 /*-----------------------------------------------------------------------
@@ -244,10 +244,10 @@
  * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze
  */
 #if defined(CONFIG_WATCHDOG)
-#define CFG_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
+#define CONFIG_SYS_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
 			 SYPCR_SWE  | SYPCR_SWRI| SYPCR_SWP)
 #else
-#define CFG_SYPCR	(SYPCR_SWTC | 0x00000600 | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
+#define CONFIG_SYS_SYPCR	(SYPCR_SWTC | 0x00000600 | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
 #endif
 
 /*-----------------------------------------------------------------------
@@ -255,28 +255,28 @@
  *-----------------------------------------------------------------------
  * PCMCIA config., multi-function pin tri-state
  */
-#define CFG_SIUMCR	(SIUMCR_MLRC10)
+#define CONFIG_SYS_SIUMCR	(SIUMCR_MLRC10)
 
 /*-----------------------------------------------------------------------
  * TBSCR - Time Base Status and Control				11-26
  *-----------------------------------------------------------------------
  * Clear Reference Interrupt Status, Timebase freezing enabled
  */
-#define CFG_TBSCR	(TBSCR_REFA | TBSCR_REFB | TBSCR_TBF | TBSCR_TBE)
+#define CONFIG_SYS_TBSCR	(TBSCR_REFA | TBSCR_REFB | TBSCR_TBF | TBSCR_TBE)
 
 /*-----------------------------------------------------------------------
  * RTCSC - Real-Time Clock Status and Control Register		11-27
  *-----------------------------------------------------------------------
  */
-/*%%%#define CFG_RTCSC	(RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE) */
-#define CFG_RTCSC	(RTCSC_SEC | RTCSC_RTE)
+/*%%%#define CONFIG_SYS_RTCSC	(RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE) */
+#define CONFIG_SYS_RTCSC	(RTCSC_SEC | RTCSC_RTE)
 
 /*-----------------------------------------------------------------------
  * PISCR - Periodic Interrupt Status and Control		11-31
  *-----------------------------------------------------------------------
  * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
  */
-#define CFG_PISCR (PISCR_PS | PISCR_PITF)
+#define CONFIG_SYS_PISCR (PISCR_PS | PISCR_PITF)
 
 /*-----------------------------------------------------------------------
  * PLPRCR - PLL, Low-Power, and Reset Control Register		15-30
@@ -287,7 +287,7 @@
  * If this is a 80 MHz CPU, set PLL multiplication factor to 5 (5*16=80)!
  */
 /* up to 50 MHz we use a 1:1 clock */
-#define CFG_PLPRCR	( (5 << PLPRCR_MF_SHIFT) | PLPRCR_TEXPS )
+#define CONFIG_SYS_PLPRCR	( (5 << PLPRCR_MF_SHIFT) | PLPRCR_TEXPS )
 
 /*-----------------------------------------------------------------------
  * SCCR - System Clock and reset Control Register		15-27
@@ -297,21 +297,21 @@
  */
 #define SCCR_MASK	SCCR_EBDF00
 /* up to 50 MHz we use a 1:1 clock */
-#define CFG_SCCR	(SCCR_COM00 | SCCR_TBS)
+#define CONFIG_SYS_SCCR	(SCCR_COM00 | SCCR_TBS)
 
 /*-----------------------------------------------------------------------
  * PCMCIA stuff
  *-----------------------------------------------------------------------
  *
  */
-#define CFG_PCMCIA_MEM_ADDR	(0xE0000000)
-#define CFG_PCMCIA_MEM_SIZE	( 64 << 20 )
-#define CFG_PCMCIA_DMA_ADDR	(0xE4000000)
-#define CFG_PCMCIA_DMA_SIZE	( 64 << 20 )
-#define CFG_PCMCIA_ATTRB_ADDR	(0xE8000000)
-#define CFG_PCMCIA_ATTRB_SIZE	( 64 << 20 )
-#define CFG_PCMCIA_IO_ADDR	(0xEC000000)
-#define CFG_PCMCIA_IO_SIZE	( 64 << 20 )
+#define CONFIG_SYS_PCMCIA_MEM_ADDR	(0xE0000000)
+#define CONFIG_SYS_PCMCIA_MEM_SIZE	( 64 << 20 )
+#define CONFIG_SYS_PCMCIA_DMA_ADDR	(0xE4000000)
+#define CONFIG_SYS_PCMCIA_DMA_SIZE	( 64 << 20 )
+#define CONFIG_SYS_PCMCIA_ATTRB_ADDR	(0xE8000000)
+#define CONFIG_SYS_PCMCIA_ATTRB_SIZE	( 64 << 20 )
+#define CONFIG_SYS_PCMCIA_IO_ADDR	(0xEC000000)
+#define CONFIG_SYS_PCMCIA_IO_SIZE	( 64 << 20 )
 
 /*-----------------------------------------------------------------------
  * IDE/ATA stuff (Supports IDE harddisk on PCMCIA Adapter)
@@ -324,29 +324,29 @@
 #undef	CONFIG_IDE_LED			/* LED	 for ide not supported	*/
 #undef	CONFIG_IDE_RESET		/* reset for ide not supported	*/
 
-#define CFG_IDE_MAXBUS		1	/* max. 1 IDE bus		*/
-#define CFG_IDE_MAXDEVICE	1	/* max. 1 drive per IDE bus	*/
+#define CONFIG_SYS_IDE_MAXBUS		1	/* max. 1 IDE bus		*/
+#define CONFIG_SYS_IDE_MAXDEVICE	1	/* max. 1 drive per IDE bus	*/
 
-#define CFG_ATA_IDE0_OFFSET	0x0000
+#define CONFIG_SYS_ATA_IDE0_OFFSET	0x0000
 
-#define CFG_ATA_BASE_ADDR	CFG_PCMCIA_MEM_ADDR
+#define CONFIG_SYS_ATA_BASE_ADDR	CONFIG_SYS_PCMCIA_MEM_ADDR
 
 /* Offset for data I/O			*/
-#define CFG_ATA_DATA_OFFSET	(CFG_PCMCIA_MEM_SIZE + 0x320)
+#define CONFIG_SYS_ATA_DATA_OFFSET	(CONFIG_SYS_PCMCIA_MEM_SIZE + 0x320)
 
 /* Offset for normal register accesses	*/
-#define CFG_ATA_REG_OFFSET	(2 * CFG_PCMCIA_MEM_SIZE + 0x320)
+#define CONFIG_SYS_ATA_REG_OFFSET	(2 * CONFIG_SYS_PCMCIA_MEM_SIZE + 0x320)
 
 /* Offset for alternate registers	*/
-#define CFG_ATA_ALT_OFFSET	0x0100
+#define CONFIG_SYS_ATA_ALT_OFFSET	0x0100
 
 /*-----------------------------------------------------------------------
  *
  *-----------------------------------------------------------------------
  *
  */
-/*#define	CFG_DER 0x2002000F*/
-#define CFG_DER 0
+/*#define	CONFIG_SYS_DER 0x2002000F*/
+#define CONFIG_SYS_DER 0
 
 /*
  * Init Memory Controller:
@@ -355,13 +355,13 @@
  */
 
 #define FLASH_BASE_PRELIM	0xFE000000	/* FLASH base */
-#define CFG_PRELIM_OR_AM	0xFE000000	/* OR addr mask */
+#define CONFIG_SYS_PRELIM_OR_AM	0xFE000000	/* OR addr mask */
 
 /* FLASH timing: ACS = 0, TRLX = 0, CSNT = 0, SCY = 4, ETHR = 0, BIH = 1 */
-#define CFG_OR_TIMING_FLASH (OR_SCY_4_CLK | OR_BI)
+#define CONFIG_SYS_OR_TIMING_FLASH (OR_SCY_4_CLK | OR_BI)
 
-#define CFG_OR0_PRELIM	(CFG_PRELIM_OR_AM | CFG_OR_TIMING_FLASH)
-#define CFG_BR0_PRELIM	((FLASH_BASE_PRELIM & BR_BA_MSK) | BR_V)
+#define CONFIG_SYS_OR0_PRELIM	(CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_FLASH)
+#define CONFIG_SYS_BR0_PRELIM	((FLASH_BASE_PRELIM & BR_BA_MSK) | BR_V)
 
 /*
  * BR1 and OR1 (SDRAM)
@@ -371,36 +371,36 @@
 #define SDRAM_MAX_SIZE		0x08000000	/* max 128 MB */
 
 /* SDRAM timing: Multiplexed addresses, GPL5 output to GPL5_A (don't care)	*/
-#define CFG_OR_TIMING_SDRAM	0x00000E00
+#define CONFIG_SYS_OR_TIMING_SDRAM	0x00000E00
 
-#define CFG_OR1_PRELIM	(0xF0000000 | CFG_OR_TIMING_SDRAM ) /* map 256 MB */
-#define CFG_BR1_PRELIM	((SDRAM_BASE_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
+#define CONFIG_SYS_OR1_PRELIM	(0xF0000000 | CONFIG_SYS_OR_TIMING_SDRAM ) /* map 256 MB */
+#define CONFIG_SYS_BR1_PRELIM	((SDRAM_BASE_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
 
 /* RPXLITE mem setting */
-#define CFG_BR3_PRELIM	0xFA400001		/* FPGA */
-#define CFG_OR3_PRELIM	0xFFFF8910
+#define CONFIG_SYS_BR3_PRELIM	0xFA400001		/* FPGA */
+#define CONFIG_SYS_OR3_PRELIM	0xFFFF8910
 
-#define CFG_BR4_PRELIM	0xFA000401		/* NVRAM&SRAM */
-#define CFG_OR4_PRELIM	0xFFFE0970
+#define CONFIG_SYS_BR4_PRELIM	0xFA000401		/* NVRAM&SRAM */
+#define CONFIG_SYS_OR4_PRELIM	0xFFFE0970
 
 /*
  * Memory Periodic Timer Prescaler
  */
 
 /* periodic timer for refresh */
-#define CFG_MAMR_PTA	20
+#define CONFIG_SYS_MAMR_PTA	20
 
 /*
  * Refresh clock Prescalar
  */
-#define CFG_MPTPR	MPTPR_PTP_DIV2
+#define CONFIG_SYS_MPTPR	MPTPR_PTP_DIV2
 
 /*
  * MAMR settings for SDRAM
  */
 
 /* 9 column SDRAM */
-#define CFG_MAMR_9COL	((CFG_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
+#define CONFIG_SYS_MAMR_9COL	((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
 			 MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 |	\
 			 MAMR_RLFA_16X | MAMR_WLFA_16X | MAMR_TLFA_16X)
 
diff --git a/include/configs/r2dplus.h b/include/configs/r2dplus.h
index 06ede3e03..6921759d5 100644
--- a/include/configs/r2dplus.h
+++ b/include/configs/r2dplus.h
@@ -36,66 +36,66 @@
 #define CONFIG_ENV_OVERWRITE	1
 
 /* SDRAM */
-#define CFG_SDRAM_BASE		(0x8C000000)
-#define CFG_SDRAM_SIZE		(0x04000000)
-
-#define CFG_LONGHELP
-#define CFG_PROMPT		"=> "
-#define CFG_CBSIZE		256
-#define CFG_PBSIZE		256
-#define CFG_MAXARGS		16
-#define CFG_BARGSIZE		512
+#define CONFIG_SYS_SDRAM_BASE		(0x8C000000)
+#define CONFIG_SYS_SDRAM_SIZE		(0x04000000)
+
+#define CONFIG_SYS_LONGHELP
+#define CONFIG_SYS_PROMPT		"=> "
+#define CONFIG_SYS_CBSIZE		256
+#define CONFIG_SYS_PBSIZE		256
+#define CONFIG_SYS_MAXARGS		16
+#define CONFIG_SYS_BARGSIZE		512
 /* List of legal baudrate settings for this board */
-#define CFG_BAUDRATE_TABLE	{ 115200, 57600, 38400, 19200, 9600 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 115200, 57600, 38400, 19200, 9600 }
 
-#define CFG_MEMTEST_START	(CFG_SDRAM_BASE)
-#define CFG_MEMTEST_END		(TEXT_BASE - 0x100000)
+#define CONFIG_SYS_MEMTEST_START	(CONFIG_SYS_SDRAM_BASE)
+#define CONFIG_SYS_MEMTEST_END		(TEXT_BASE - 0x100000)
 
-#define CFG_LOAD_ADDR		(CFG_SDRAM_BASE + 32 * 1024 * 1024)
+#define CONFIG_SYS_LOAD_ADDR		(CONFIG_SYS_SDRAM_BASE + 32 * 1024 * 1024)
 /* Address of u-boot image in Flash */
-#define CFG_MONITOR_BASE	(CFG_FLASH_BASE)
-#define CFG_MONITOR_LEN		(256 * 1024)
+#define CONFIG_SYS_MONITOR_BASE	(CONFIG_SYS_FLASH_BASE)
+#define CONFIG_SYS_MONITOR_LEN		(256 * 1024)
 /* Size of DRAM reserved for malloc() use */
-#define CFG_MALLOC_LEN		(1024 * 1024)
+#define CONFIG_SYS_MALLOC_LEN		(1024 * 1024)
 /* size in bytes reserved for initial data */
-#define CFG_GBL_DATA_SIZE	(256)
-#define CFG_BOOTMAPSZ		(8 * 1024 * 1024)
+#define CONFIG_SYS_GBL_DATA_SIZE	(256)
+#define CONFIG_SYS_BOOTMAPSZ		(8 * 1024 * 1024)
 
 /*
  * NOR Flash ( Spantion S29GL256P )
  */
-#define CFG_FLASH_CFI
+#define CONFIG_SYS_FLASH_CFI
 #define CONFIG_FLASH_CFI_DRIVER
-#define CFG_FLASH_BASE		(0xA0000000)
-#define CFG_MAX_FLASH_BANKS (1)
-#define CFG_MAX_FLASH_SECT  256
-#define CFG_FLASH_BANKS_LIST	{ CFG_FLASH_BASE }
+#define CONFIG_SYS_FLASH_BASE		(0xA0000000)
+#define CONFIG_SYS_MAX_FLASH_BANKS (1)
+#define CONFIG_SYS_MAX_FLASH_SECT  256
+#define CONFIG_SYS_FLASH_BANKS_LIST	{ CONFIG_SYS_FLASH_BASE }
 
-#define CFG_ENV_IS_IN_FLASH
-#define CFG_ENV_SECT_SIZE	0x40000
-#define CFG_ENV_SIZE        (CFG_ENV_SECT_SIZE)
-#define CFG_ENV_ADDR        (CFG_MONITOR_BASE + CFG_MONITOR_LEN)
+#define CONFIG_ENV_IS_IN_FLASH
+#define CONFIG_ENV_SECT_SIZE	0x40000
+#define CONFIG_ENV_SIZE        (CONFIG_ENV_SECT_SIZE)
+#define CONFIG_ENV_ADDR        (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)
 
 /*
  * SuperH Clock setting
  */
 #define CONFIG_SYS_CLK_FREQ	60000000
 #define TMU_CLK_DIVIDER		4
-#define CFG_HZ			(CONFIG_SYS_CLK_FREQ / TMU_CLK_DIVIDER)
-#define	CFG_PLL_SETTLING_TIME	100/* in us */
+#define CONFIG_SYS_HZ			(CONFIG_SYS_CLK_FREQ / TMU_CLK_DIVIDER)
+#define	CONFIG_SYS_PLL_SETTLING_TIME	100/* in us */
 
 /*
  * IDE support
  */
 #define CONFIG_IDE_RESET	1
-#define CFG_PIO_MODE		1
-#define CFG_IDE_MAXBUS		1 /* IDE bus */
-#define CFG_IDE_MAXDEVICE	1
-#define CFG_ATA_BASE_ADDR	0xb4000000
-#define CFG_ATA_STRIDE		2 /* 1bit shift */
-#define CFG_ATA_DATA_OFFSET	0x1000	/* data reg offset */
-#define CFG_ATA_REG_OFFSET	0x1000	/* reg offset */
-#define CFG_ATA_ALT_OFFSET	0x800	/* alternate register offset */
+#define CONFIG_SYS_PIO_MODE		1
+#define CONFIG_SYS_IDE_MAXBUS		1 /* IDE bus */
+#define CONFIG_SYS_IDE_MAXDEVICE	1
+#define CONFIG_SYS_ATA_BASE_ADDR	0xb4000000
+#define CONFIG_SYS_ATA_STRIDE		2 /* 1bit shift */
+#define CONFIG_SYS_ATA_DATA_OFFSET	0x1000	/* data reg offset */
+#define CONFIG_SYS_ATA_REG_OFFSET	0x1000	/* reg offset */
+#define CONFIG_SYS_ATA_ALT_OFFSET	0x800	/* alternate register offset */
 
 /*
  * SuperH PCI Bridge Configration
diff --git a/include/configs/r7780mp.h b/include/configs/r7780mp.h
index 77881e7a2..f85d5d669 100644
--- a/include/configs/r7780mp.h
+++ b/include/configs/r7780mp.h
@@ -31,7 +31,7 @@
 #define CONFIG_SH4A		1
 #define CONFIG_CPU_SH7780	1
 #define CONFIG_R7780MP		1
-#define CFG_R7780MP_OLD_FLASH	1
+#define CONFIG_SYS_R7780MP_OLD_FLASH	1
 #define __LITTLE_ENDIAN__ 1
 
 /*
@@ -60,69 +60,69 @@
 /* check for keypress on bootdelay==0 */
 /*#define CONFIG_ZERO_BOOTDELAY_CHECK*/
 
-#define CFG_SDRAM_BASE		(0x08000000)
-#define CFG_SDRAM_SIZE		(128 * 1024 * 1024)
+#define CONFIG_SYS_SDRAM_BASE		(0x08000000)
+#define CONFIG_SYS_SDRAM_SIZE		(128 * 1024 * 1024)
 
-#define CFG_LONGHELP
-#define CFG_PROMPT		"=> "
-#define CFG_CBSIZE		256
-#define CFG_PBSIZE		256
-#define CFG_MAXARGS		16
-#define CFG_BARGSIZE	512
+#define CONFIG_SYS_LONGHELP
+#define CONFIG_SYS_PROMPT		"=> "
+#define CONFIG_SYS_CBSIZE		256
+#define CONFIG_SYS_PBSIZE		256
+#define CONFIG_SYS_MAXARGS		16
+#define CONFIG_SYS_BARGSIZE	512
 /* List of legal baudrate settings for this board */
-#define CFG_BAUDRATE_TABLE	{ 115200, 57600, 38400, 19200, 9600 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 115200, 57600, 38400, 19200, 9600 }
 
-#define CFG_MEMTEST_START	(CFG_SDRAM_BASE)
-#define CFG_MEMTEST_END		(TEXT_BASE - 0x100000)
+#define CONFIG_SYS_MEMTEST_START	(CONFIG_SYS_SDRAM_BASE)
+#define CONFIG_SYS_MEMTEST_END		(TEXT_BASE - 0x100000)
 
 /* Flash board support */
-#define CFG_FLASH_BASE		(0xA0000000)
-#ifdef CFG_R7780MP_OLD_FLASH
+#define CONFIG_SYS_FLASH_BASE		(0xA0000000)
+#ifdef CONFIG_SYS_R7780MP_OLD_FLASH
 /* NOR Flash (S29PL127J60TFI130) */
-# define CFG_FLASH_CFI_WIDTH	FLASH_CFI_32BIT
-# define CFG_MAX_FLASH_BANKS	(2)
-# define CFG_MAX_FLASH_SECT	270
-# define CFG_FLASH_BANKS_LIST	{ CFG_FLASH_BASE,\
-				CFG_FLASH_BASE + 0x100000,\
-				CFG_FLASH_BASE + 0x400000,\
-				CFG_FLASH_BASE + 0x700000, }
-#else /* CFG_R7780MP_OLD_FLASH */
+# define CONFIG_SYS_FLASH_CFI_WIDTH	FLASH_CFI_32BIT
+# define CONFIG_SYS_MAX_FLASH_BANKS	(2)
+# define CONFIG_SYS_MAX_FLASH_SECT	270
+# define CONFIG_SYS_FLASH_BANKS_LIST	{ CONFIG_SYS_FLASH_BASE,\
+				CONFIG_SYS_FLASH_BASE + 0x100000,\
+				CONFIG_SYS_FLASH_BASE + 0x400000,\
+				CONFIG_SYS_FLASH_BASE + 0x700000, }
+#else /* CONFIG_SYS_R7780MP_OLD_FLASH */
 /* NOR Flash (Spantion S29GL256P) */
-# define CFG_MAX_FLASH_BANKS	(1)
-# define CFG_MAX_FLASH_SECT		256
-# define CFG_FLASH_BANKS_LIST	{ CFG_FLASH_BASE }
-#endif /* CFG_R7780MP_OLD_FLASH */
+# define CONFIG_SYS_MAX_FLASH_BANKS	(1)
+# define CONFIG_SYS_MAX_FLASH_SECT		256
+# define CONFIG_SYS_FLASH_BANKS_LIST	{ CONFIG_SYS_FLASH_BASE }
+#endif /* CONFIG_SYS_R7780MP_OLD_FLASH */
 
-#define CFG_LOAD_ADDR		(CFG_SDRAM_BASE + 4 * 1024 * 1024)
+#define CONFIG_SYS_LOAD_ADDR		(CONFIG_SYS_SDRAM_BASE + 4 * 1024 * 1024)
 /* Address of u-boot image in Flash */
-#define CFG_MONITOR_BASE	(CFG_FLASH_BASE)
-#define CFG_MONITOR_LEN		(256 * 1024)
+#define CONFIG_SYS_MONITOR_BASE	(CONFIG_SYS_FLASH_BASE)
+#define CONFIG_SYS_MONITOR_LEN		(256 * 1024)
 /* Size of DRAM reserved for malloc() use */
-#define CFG_MALLOC_LEN		(1204 * 1024)
+#define CONFIG_SYS_MALLOC_LEN		(1204 * 1024)
 
 /* size in bytes reserved for initial data */
-#define CFG_GBL_DATA_SIZE	(256)
-#define CFG_BOOTMAPSZ		(8 * 1024 * 1024)
-#define CFG_RX_ETH_BUFFER	(8)
+#define CONFIG_SYS_GBL_DATA_SIZE	(256)
+#define CONFIG_SYS_BOOTMAPSZ		(8 * 1024 * 1024)
+#define CONFIG_SYS_RX_ETH_BUFFER	(8)
 
-#define CFG_FLASH_CFI
+#define CONFIG_SYS_FLASH_CFI
 #define CONFIG_FLASH_CFI_DRIVER
-#undef CFG_FLASH_CFI_BROKEN_TABLE
-#undef  CFG_FLASH_QUIET_TEST
+#undef CONFIG_SYS_FLASH_CFI_BROKEN_TABLE
+#undef  CONFIG_SYS_FLASH_QUIET_TEST
 /* print 'E' for empty sector on flinfo */
-#define CFG_FLASH_EMPTY_INFO
+#define CONFIG_SYS_FLASH_EMPTY_INFO
 
-#define CFG_ENV_IS_IN_FLASH
-#define CFG_ENV_SECT_SIZE	(256 * 1024)
-#define CFG_ENV_SIZE		(CFG_ENV_SECT_SIZE)
-#define CFG_ENV_ADDR		(CFG_MONITOR_BASE + CFG_MONITOR_LEN)
-#define CFG_FLASH_ERASE_TOUT	120000
-#define CFG_FLASH_WRITE_TOUT	500
+#define CONFIG_ENV_IS_IN_FLASH
+#define CONFIG_ENV_SECT_SIZE	(256 * 1024)
+#define CONFIG_ENV_SIZE		(CONFIG_ENV_SECT_SIZE)
+#define CONFIG_ENV_ADDR		(CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)
+#define CONFIG_SYS_FLASH_ERASE_TOUT	120000
+#define CONFIG_SYS_FLASH_WRITE_TOUT	500
 
 /* Board Clock */
 #define CONFIG_SYS_CLK_FREQ	33333333
 #define TMU_CLK_DIVIDER		4
-#define CFG_HZ	(CONFIG_SYS_CLK_FREQ / TMU_CLK_DIVIDER)
+#define CONFIG_SYS_HZ	(CONFIG_SYS_CLK_FREQ / TMU_CLK_DIVIDER)
 
 /* PCI Controller */
 #if defined(CONFIG_CMD_PCI)
@@ -157,14 +157,14 @@
 /* Compact flash Support */
 #if defined(CONFIG_CMD_IDE)
 #define CONFIG_IDE_RESET        1
-#define CFG_PIO_MODE            1
-#define CFG_IDE_MAXBUS          1   /* IDE bus */
-#define CFG_IDE_MAXDEVICE       1
-#define CFG_ATA_BASE_ADDR       0xb4000000
-#define CFG_ATA_STRIDE          2               /* 1bit shift */
-#define CFG_ATA_DATA_OFFSET     0x1000          /* data reg offset */
-#define CFG_ATA_REG_OFFSET      0x1000          /* reg offset */
-#define CFG_ATA_ALT_OFFSET      0x800           /* alternate register offset */
+#define CONFIG_SYS_PIO_MODE            1
+#define CONFIG_SYS_IDE_MAXBUS          1   /* IDE bus */
+#define CONFIG_SYS_IDE_MAXDEVICE       1
+#define CONFIG_SYS_ATA_BASE_ADDR       0xb4000000
+#define CONFIG_SYS_ATA_STRIDE          2               /* 1bit shift */
+#define CONFIG_SYS_ATA_DATA_OFFSET     0x1000          /* data reg offset */
+#define CONFIG_SYS_ATA_REG_OFFSET      0x1000          /* reg offset */
+#define CONFIG_SYS_ATA_ALT_OFFSET      0x800           /* alternate register offset */
 #endif /* CONFIG_CMD_IDE */
 
 #endif /* __R7780RP_H */
diff --git a/include/configs/redwood.h b/include/configs/redwood.h
index 35e9f8bb5..4b744a794 100644
--- a/include/configs/redwood.h
+++ b/include/configs/redwood.h
@@ -46,49 +46,49 @@
  * Base addresses -- Note these are effective addresses where the
  * actual resources get mapped (not physical addresses)
  *----------------------------------------------------------------------*/
-#define CFG_FLASH_BASE		0xfff00000	/* start of FLASH	*/
-#define CFG_PERIPHERAL_BASE	0xa0000000	/* internal peripherals	*/
-#define CFG_ISRAM_BASE		0x90000000	/* internal SRAM	*/
+#define CONFIG_SYS_FLASH_BASE		0xfff00000	/* start of FLASH	*/
+#define CONFIG_SYS_PERIPHERAL_BASE	0xa0000000	/* internal peripherals	*/
+#define CONFIG_SYS_ISRAM_BASE		0x90000000	/* internal SRAM	*/
 
-#define CFG_PCI_BASE		0xd0000000	/* internal PCI regs	*/
+#define CONFIG_SYS_PCI_BASE		0xd0000000	/* internal PCI regs	*/
 
-#define CFG_PCIE_MEMBASE	0x90000000	/* mapped PCIe memory	*/
-#define CFG_PCIE0_MEMBASE	0x90000000	/* mapped PCIe memory	*/
-#define CFG_PCIE1_MEMBASE	0xa0000000	/* mapped PCIe memory	*/
-#define CFG_PCIE_MEMSIZE	0x01000000
+#define CONFIG_SYS_PCIE_MEMBASE	0x90000000	/* mapped PCIe memory	*/
+#define CONFIG_SYS_PCIE0_MEMBASE	0x90000000	/* mapped PCIe memory	*/
+#define CONFIG_SYS_PCIE1_MEMBASE	0xa0000000	/* mapped PCIe memory	*/
+#define CONFIG_SYS_PCIE_MEMSIZE	0x01000000
 
-#define CFG_PCIE0_XCFGBASE	0xb0000000
-#define CFG_PCIE1_XCFGBASE	0xb2000000
-#define CFG_PCIE2_XCFGBASE	0xb4000000
-#define CFG_PCIE0_CFGBASE	0xb6000000
-#define CFG_PCIE1_CFGBASE	0xb8000000
-#define CFG_PCIE2_CFGBASE	0xba000000
+#define CONFIG_SYS_PCIE0_XCFGBASE	0xb0000000
+#define CONFIG_SYS_PCIE1_XCFGBASE	0xb2000000
+#define CONFIG_SYS_PCIE2_XCFGBASE	0xb4000000
+#define CONFIG_SYS_PCIE0_CFGBASE	0xb6000000
+#define CONFIG_SYS_PCIE1_CFGBASE	0xb8000000
+#define CONFIG_SYS_PCIE2_CFGBASE	0xba000000
 
 /* PCIe mapped UTL registers */
-#define CFG_PCIE0_REGBASE   0xd0000000
-#define CFG_PCIE1_REGBASE   0xd0010000
-#define CFG_PCIE2_REGBASE   0xd0020000
+#define CONFIG_SYS_PCIE0_REGBASE   0xd0000000
+#define CONFIG_SYS_PCIE1_REGBASE   0xd0010000
+#define CONFIG_SYS_PCIE2_REGBASE   0xd0020000
 
 /* System RAM mapped to PCI space */
-#define CONFIG_PCI_SYS_MEM_BUS	CFG_SDRAM_BASE
-#define CONFIG_PCI_SYS_MEM_PHYS	CFG_SDRAM_BASE
+#define CONFIG_PCI_SYS_MEM_BUS	CONFIG_SYS_SDRAM_BASE
+#define CONFIG_PCI_SYS_MEM_PHYS	CONFIG_SYS_SDRAM_BASE
 #define CONFIG_PCI_SYS_MEM_SIZE	(1024 * 1024 * 1024)
 
-#define CFG_FPGA_BASE		0xe2000000	/* epld			*/
-#define CFG_OPER_FLASH		0xe7000000	/* SRAM - OPER Flash	*/
+#define CONFIG_SYS_FPGA_BASE		0xe2000000	/* epld			*/
+#define CONFIG_SYS_OPER_FLASH		0xe7000000	/* SRAM - OPER Flash	*/
 
 /*-----------------------------------------------------------------------
  * Initial RAM & stack pointer (placed in internal SRAM)
  *----------------------------------------------------------------------*/
-#define CFG_TEMP_STACK_OCM	1
-#define CFG_OCM_DATA_ADDR	CFG_ISRAM_BASE
-#define CFG_INIT_RAM_ADDR	CFG_ISRAM_BASE	/* Initial RAM address	*/
-#define CFG_INIT_RAM_END	0x2000		/* End of used area in RAM */
-#define CFG_GBL_DATA_SIZE	128		/* num bytes initial data */
+#define CONFIG_SYS_TEMP_STACK_OCM	1
+#define CONFIG_SYS_OCM_DATA_ADDR	CONFIG_SYS_ISRAM_BASE
+#define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_ISRAM_BASE	/* Initial RAM address	*/
+#define CONFIG_SYS_INIT_RAM_END	0x2000		/* End of used area in RAM */
+#define CONFIG_SYS_GBL_DATA_SIZE	128		/* num bytes initial data */
 
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_POST_WORD_ADDR	(CFG_GBL_DATA_OFFSET - 0x4)
-#define CFG_INIT_SP_OFFSET	CFG_POST_WORD_ADDR
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_POST_WORD_ADDR	(CONFIG_SYS_GBL_DATA_OFFSET - 0x4)
+#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_POST_WORD_ADDR
 
 /*-----------------------------------------------------------------------
  * DDR SDRAM
@@ -96,7 +96,7 @@
 #define CONFIG_SPD_EEPROM	1	/* Use SPD EEPROM for setup	*/
 #define CONFIG_DDR_ECC		1	/* with ECC support		*/
 
-#define CFG_SPD_MAX_DIMMS	2
+#define CONFIG_SYS_SPD_MAX_DIMMS	2
 
 /* SPD i2c spd addresses */
 #define SPD_EEPROM_ADDRESS     {IIC0_DIMM0_ADDR, IIC0_DIMM1_ADDR}
@@ -106,22 +106,22 @@
 /*-----------------------------------------------------------------------
  * I2C
  *----------------------------------------------------------------------*/
-#define CFG_I2C_SPEED		400000	/* I2C speed			*/
+#define CONFIG_SYS_I2C_SPEED		400000	/* I2C speed			*/
 
 #define IIC0_BOOTPROM_ADDR	0x50
 #define IIC0_ALT_BOOTPROM_ADDR	0x54
 
 /* Don't probe these addrs */
-#define CFG_I2C_NOPROBES	{0x50, 0x52, 0x53, 0x54}
+#define CONFIG_SYS_I2C_NOPROBES	{0x50, 0x52, 0x53, 0x54}
 
-#define CFG_I2C_EEPROM_ADDR_LEN	2	/* Bytes of address		*/
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN	2	/* Bytes of address		*/
 
 /*-----------------------------------------------------------------------
  * Environment
  *----------------------------------------------------------------------*/
-#undef	CFG_ENV_IS_IN_NVRAM		/* ... not in NVRAM		*/
-#define	CFG_ENV_IS_IN_FLASH	1	/* Environment uses flash	*/
-#undef	CFG_ENV_IS_IN_EEPROM		/* ... not in EEPROM		*/
+#undef	CONFIG_ENV_IS_IN_NVRAM		/* ... not in NVRAM		*/
+#define	CONFIG_ENV_IS_IN_FLASH	1	/* Environment uses flash	*/
+#undef	CONFIG_ENV_IS_IN_EEPROM		/* ... not in EEPROM		*/
 
 #define CONFIG_PREBOOT	"echo;"	\
 	"echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \
@@ -164,22 +164,22 @@
 /*-----------------------------------------------------------------------
  * FLASH related
  *----------------------------------------------------------------------*/
-#define CFG_FLASH_CFI			/* The flash is CFI compatible	*/
+#define CONFIG_SYS_FLASH_CFI			/* The flash is CFI compatible	*/
 #define CONFIG_FLASH_CFI_DRIVER		/* Use common CFI driver	*/
-#define CFG_FLASH_CFI_AMD_RESET 1	/* Use AMD (Spansion) reset cmd */
+#define CONFIG_SYS_FLASH_CFI_AMD_RESET 1	/* Use AMD (Spansion) reset cmd */
 
-#define CFG_MAX_FLASH_BANKS	3	/* number of banks		*/
-#define CFG_MAX_FLASH_SECT	256	/* sectors per device		*/
+#define CONFIG_SYS_MAX_FLASH_BANKS	3	/* number of banks		*/
+#define CONFIG_SYS_MAX_FLASH_SECT	256	/* sectors per device		*/
 
-#undef	CFG_FLASH_CHECKSUM
-#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms) */
-#define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms) */
+#undef	CONFIG_SYS_FLASH_CHECKSUM
+#define CONFIG_SYS_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms) */
+#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms) */
 
-#ifdef CFG_ENV_IS_IN_FLASH
-#define CFG_ENV_SECT_SIZE	0x10000	/* size of one complete sector	*/
-#define CFG_ENV_ADDR		0xfffa0000
-#define CFG_ENV_SIZE		0x10000	/* Size of Environment vars	*/
-#endif /* CFG_ENV_IS_IN_FLASH */
+#ifdef CONFIG_ENV_IS_IN_FLASH
+#define CONFIG_ENV_SECT_SIZE	0x10000	/* size of one complete sector	*/
+#define CONFIG_ENV_ADDR		0xfffa0000
+#define CONFIG_ENV_SIZE		0x10000	/* Size of Environment vars	*/
+#endif /* CONFIG_ENV_IS_IN_FLASH */
 
 /*---------------------------------------------------------------------------*/
 
diff --git a/include/configs/rmu.h b/include/configs/rmu.h
index 596bf1556..d88ae81ff 100644
--- a/include/configs/rmu.h
+++ b/include/configs/rmu.h
@@ -57,14 +57,14 @@
 	"bootm"
 
 #define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
-#undef	CFG_LOADS_BAUD_CHANGE		/* don't allow baudrate change	*/
+#undef	CONFIG_SYS_LOADS_BAUD_CHANGE		/* don't allow baudrate change	*/
 
 /* enable I2C and select the hardware/software driver */
 #undef	CONFIG_HARD_I2C			/* I2C with hardware support	*/
 #define CONFIG_SOFT_I2C		1	/* I2C bit-banged		*/
 
-#define CFG_I2C_SPEED		40000	/* 40 kHz is supposed to work	*/
-#define CFG_I2C_SLAVE		0xFE
+#define CONFIG_SYS_I2C_SPEED		40000	/* 40 kHz is supposed to work	*/
+#define CONFIG_SYS_I2C_SLAVE		0xFE
 
 /* Software (bit-bang) I2C driver configuration */
 #define PB_SCL		0x00000020	/* PB 26 */
@@ -82,8 +82,8 @@
 
 /* M41T11 Serial Access Timekeeper(R) SRAM */
 #define CONFIG_RTC_M41T11 1
-#define CFG_I2C_RTC_ADDR 0x68
-#define CFG_M41T11_BASE_YEAR 1900	/* play along with the linux driver */
+#define CONFIG_SYS_I2C_RTC_ADDR 0x68
+#define CONFIG_SYS_M41T11_BASE_YEAR 1900	/* play along with the linux driver */
 
 #undef	CONFIG_WATCHDOG			/* watchdog disabled		*/
 
@@ -118,25 +118,25 @@
 /*
  * Miscellaneous configurable options
  */
-#define	CFG_LONGHELP			/* undef to save memory		*/
-#define	CFG_PROMPT	"=> "		/* Monitor Command Prompt	*/
+#define	CONFIG_SYS_LONGHELP			/* undef to save memory		*/
+#define	CONFIG_SYS_PROMPT	"=> "		/* Monitor Command Prompt	*/
 #if defined(CONFIG_CMD_KGDB)
-#define	CFG_CBSIZE	1024		/* Console I/O Buffer Size	*/
+#define	CONFIG_SYS_CBSIZE	1024		/* Console I/O Buffer Size	*/
 #else
-#define	CFG_CBSIZE	256		/* Console I/O Buffer Size	*/
+#define	CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size	*/
 #endif
-#define	CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define	CFG_MAXARGS	16		/* max number of command args	*/
-#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+#define	CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define	CONFIG_SYS_MAXARGS	16		/* max number of command args	*/
+#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
 
-#define CFG_MEMTEST_START	0x0040000	/* memtest works on	*/
-#define CFG_MEMTEST_END		0x00C0000	/* 4 ... 12 MB in DRAM	*/
+#define CONFIG_SYS_MEMTEST_START	0x0040000	/* memtest works on	*/
+#define CONFIG_SYS_MEMTEST_END		0x00C0000	/* 4 ... 12 MB in DRAM	*/
 
-#define	CFG_LOAD_ADDR		0x100000	/* default load address	*/
+#define	CONFIG_SYS_LOAD_ADDR		0x100000	/* default load address	*/
 
-#define	CFG_HZ		1000		/* decrementer freq: 1 ms ticks	*/
+#define	CONFIG_SYS_HZ		1000		/* decrementer freq: 1 ms ticks	*/
 
-#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
 
 /*
  * Low Level Configuration Settings
@@ -146,67 +146,67 @@
 /*-----------------------------------------------------------------------
  * Internal Memory Mapped Register
  */
-#define CFG_IMMR		0xFA200000
+#define CONFIG_SYS_IMMR		0xFA200000
 
 /*-----------------------------------------------------------------------
  * Definitions for initial stack pointer and data area (in DPRAM)
  */
-#define CFG_INIT_RAM_ADDR	CFG_IMMR
-#define	CFG_INIT_RAM_END	0x2F00	/* End of used area in DPRAM	*/
-#define	CFG_GBL_DATA_SIZE	64  /* size in bytes reserved for initial data */
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define	CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_IMMR
+#define	CONFIG_SYS_INIT_RAM_END	0x2F00	/* End of used area in DPRAM	*/
+#define	CONFIG_SYS_GBL_DATA_SIZE	64  /* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define	CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
 /*-----------------------------------------------------------------------
  * Start addresses for the final memory configuration
  * (Set up by the startup code)
- * Please note that CFG_SDRAM_BASE _must_ start at 0
+ * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
  */
-#define	CFG_SDRAM_BASE		0x00000000
-#define CFG_FLASH_BASE		(0-flash_info[0].size)	/* Put flash at end	*/
+#define	CONFIG_SYS_SDRAM_BASE		0x00000000
+#define CONFIG_SYS_FLASH_BASE		(0-flash_info[0].size)	/* Put flash at end	*/
 #if defined(DEBUG) || defined(CONFIG_CMD_IDE)
-#define	CFG_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor	*/
+#define	CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor	*/
 #else
-#define	CFG_MONITOR_LEN		(128 << 10)	/* Reserve 128 kB for Monitor	*/
+#define	CONFIG_SYS_MONITOR_LEN		(128 << 10)	/* Reserve 128 kB for Monitor	*/
 #endif
-#define CFG_MONITOR_BASE	TEXT_BASE
-#define	CFG_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/
+#define CONFIG_SYS_MONITOR_BASE	TEXT_BASE
+#define	CONFIG_SYS_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/
 
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define	CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux	*/
+#define	CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux	*/
 
 /*-----------------------------------------------------------------------
  * FLASH organization
  */
-#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
-#define CFG_MAX_FLASH_SECT	67	/* max number of sectors on one chip	*/
+#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
+#define CONFIG_SYS_MAX_FLASH_SECT	67	/* max number of sectors on one chip	*/
 
-#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
-#define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
+#define CONFIG_SYS_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
+#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
 
-#define	CFG_ENV_IS_IN_FLASH	1
-#define CFG_ENV_ADDR		((TEXT_BASE) + 0x40000)
-#define	CFG_ENV_SIZE		0x40000	/* Total Size of Environment Sector	*/
+#define	CONFIG_ENV_IS_IN_FLASH	1
+#define CONFIG_ENV_ADDR		((TEXT_BASE) + 0x40000)
+#define	CONFIG_ENV_SIZE		0x40000	/* Total Size of Environment Sector	*/
 
 /* Address and size of Redundant Environment Sector	*/
-#define CFG_ENV_ADDR_REDUND	(CFG_ENV_ADDR+CFG_ENV_SIZE)
-#define CFG_ENV_SIZE_REDUND	(CFG_ENV_SIZE)
+#define CONFIG_ENV_ADDR_REDUND	(CONFIG_ENV_ADDR+CONFIG_ENV_SIZE)
+#define CONFIG_ENV_SIZE_REDUND	(CONFIG_ENV_SIZE)
 
 /*-----------------------------------------------------------------------
  * Reset address
  */
-#define	CFG_RESET_ADDRESS	((ulong)((((immap_t *)CFG_IMMR)->im_clkrst.res)))
+#define	CONFIG_SYS_RESET_ADDRESS	((ulong)((((immap_t *)CONFIG_SYS_IMMR)->im_clkrst.res)))
 
 /*-----------------------------------------------------------------------
  * Cache Configuration
  */
-#define CFG_CACHELINE_SIZE	16	/* For all MPC8xx CPUs			*/
+#define CONFIG_SYS_CACHELINE_SIZE	16	/* For all MPC8xx CPUs			*/
 #if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT	4	/* log base 2 of the above value	*/
+#define CONFIG_SYS_CACHELINE_SHIFT	4	/* log base 2 of the above value	*/
 #endif
 
 /*-----------------------------------------------------------------------
@@ -216,10 +216,10 @@
  * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze
  */
 #if defined(CONFIG_WATCHDOG)
-#define CFG_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
+#define CONFIG_SYS_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
 			 SYPCR_SWE  | SYPCR_SWRI| SYPCR_SWP)
 #else
-#define CFG_SYPCR	(SYPCR_SWTC | 0x00000600 | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
+#define CONFIG_SYS_SYPCR	(SYPCR_SWTC | 0x00000600 | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
 #endif
 
 /*-----------------------------------------------------------------------
@@ -227,28 +227,28 @@
  *-----------------------------------------------------------------------
  * PCMCIA config., multi-function pin tri-state
  */
-#define CFG_SIUMCR	(SIUMCR_MLRC10)
+#define CONFIG_SYS_SIUMCR	(SIUMCR_MLRC10)
 
 /*-----------------------------------------------------------------------
  * TBSCR - Time Base Status and Control				11-26
  *-----------------------------------------------------------------------
  * Clear Reference Interrupt Status, Timebase freezing enabled
  */
-#define CFG_TBSCR	(TBSCR_REFA | TBSCR_REFB | TBSCR_TBF | TBSCR_TBE)
+#define CONFIG_SYS_TBSCR	(TBSCR_REFA | TBSCR_REFB | TBSCR_TBF | TBSCR_TBE)
 
 /*-----------------------------------------------------------------------
  * RTCSC - Real-Time Clock Status and Control Register		11-27
  *-----------------------------------------------------------------------
  */
-/*%%%#define CFG_RTCSC	(RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE) */
-#define CFG_RTCSC	(RTCSC_SEC | RTCSC_RTE)
+/*%%%#define CONFIG_SYS_RTCSC	(RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE) */
+#define CONFIG_SYS_RTCSC	(RTCSC_SEC | RTCSC_RTE)
 
 /*-----------------------------------------------------------------------
  * PISCR - Periodic Interrupt Status and Control		11-31
  *-----------------------------------------------------------------------
  * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
  */
-#define CFG_PISCR (PISCR_PS | PISCR_PITF)
+#define CONFIG_SYS_PISCR (PISCR_PS | PISCR_PITF)
 
 /*-----------------------------------------------------------------------
  * PLPRCR - PLL, Low-Power, and Reset Control Register		15-30
@@ -259,7 +259,7 @@
  * If this is a 80 MHz CPU, set PLL multiplication factor to 5 (5*16=80)!
  */
 /* up to 50 MHz we use a 1:1 clock */
-#define CFG_PLPRCR	( (5 << PLPRCR_MF_SHIFT) | PLPRCR_TEXPS )
+#define CONFIG_SYS_PLPRCR	( (5 << PLPRCR_MF_SHIFT) | PLPRCR_TEXPS )
 
 /*-----------------------------------------------------------------------
  * SCCR - System Clock and reset Control Register		15-27
@@ -269,21 +269,21 @@
  */
 #define SCCR_MASK	SCCR_EBDF00
 /* up to 50 MHz we use a 1:1 clock */
-#define CFG_SCCR	(SCCR_COM00 | SCCR_TBS)
+#define CONFIG_SYS_SCCR	(SCCR_COM00 | SCCR_TBS)
 
 /*-----------------------------------------------------------------------
  * PCMCIA stuff
  *-----------------------------------------------------------------------
  *
  */
-#define CFG_PCMCIA_MEM_ADDR	(0xE0000000)
-#define CFG_PCMCIA_MEM_SIZE	( 64 << 20 )
-#define CFG_PCMCIA_DMA_ADDR	(0xE4000000)
-#define CFG_PCMCIA_DMA_SIZE	( 64 << 20 )
-#define CFG_PCMCIA_ATTRB_ADDR	(0xE8000000)
-#define CFG_PCMCIA_ATTRB_SIZE	( 64 << 20 )
-#define CFG_PCMCIA_IO_ADDR	(0xEC000000)
-#define CFG_PCMCIA_IO_SIZE	( 64 << 20 )
+#define CONFIG_SYS_PCMCIA_MEM_ADDR	(0xE0000000)
+#define CONFIG_SYS_PCMCIA_MEM_SIZE	( 64 << 20 )
+#define CONFIG_SYS_PCMCIA_DMA_ADDR	(0xE4000000)
+#define CONFIG_SYS_PCMCIA_DMA_SIZE	( 64 << 20 )
+#define CONFIG_SYS_PCMCIA_ATTRB_ADDR	(0xE8000000)
+#define CONFIG_SYS_PCMCIA_ATTRB_SIZE	( 64 << 20 )
+#define CONFIG_SYS_PCMCIA_IO_ADDR	(0xEC000000)
+#define CONFIG_SYS_PCMCIA_IO_SIZE	( 64 << 20 )
 
 /*-----------------------------------------------------------------------
  * IDE/ATA stuff (Supports IDE harddisk on PCMCIA Adapter)
@@ -296,29 +296,29 @@
 #undef	CONFIG_IDE_LED			/* LED   for ide not supported	*/
 #undef	CONFIG_IDE_RESET		/* reset for ide not supported	*/
 
-#define CFG_IDE_MAXBUS		1	/* max. 1 IDE bus		*/
-#define CFG_IDE_MAXDEVICE	1	/* max. 1 drive per IDE bus	*/
+#define CONFIG_SYS_IDE_MAXBUS		1	/* max. 1 IDE bus		*/
+#define CONFIG_SYS_IDE_MAXDEVICE	1	/* max. 1 drive per IDE bus	*/
 
-#define CFG_ATA_IDE0_OFFSET	0x0000
+#define CONFIG_SYS_ATA_IDE0_OFFSET	0x0000
 
-#define CFG_ATA_BASE_ADDR	CFG_PCMCIA_MEM_ADDR
+#define CONFIG_SYS_ATA_BASE_ADDR	CONFIG_SYS_PCMCIA_MEM_ADDR
 
 /* Offset for data I/O			*/
-#define CFG_ATA_DATA_OFFSET	(CFG_PCMCIA_MEM_SIZE + 0x320)
+#define CONFIG_SYS_ATA_DATA_OFFSET	(CONFIG_SYS_PCMCIA_MEM_SIZE + 0x320)
 
 /* Offset for normal register accesses	*/
-#define CFG_ATA_REG_OFFSET	(2 * CFG_PCMCIA_MEM_SIZE + 0x320)
+#define CONFIG_SYS_ATA_REG_OFFSET	(2 * CONFIG_SYS_PCMCIA_MEM_SIZE + 0x320)
 
 /* Offset for alternate registers	*/
-#define CFG_ATA_ALT_OFFSET	0x0100
+#define CONFIG_SYS_ATA_ALT_OFFSET	0x0100
 
 /*-----------------------------------------------------------------------
  *
  *-----------------------------------------------------------------------
  *
  */
-/*#define	CFG_DER	0x2002000F*/
-#define CFG_DER	0
+/*#define	CONFIG_SYS_DER	0x2002000F*/
+#define CONFIG_SYS_DER	0
 
 /*
  * Init Memory Controller:
@@ -327,13 +327,13 @@
  */
 
 #define FLASH_BASE_PRELIM	0xFC000000	/* FLASH base - up to 64 MB of flash */
-#define CFG_PRELIM_OR_AM	0xFC000000	/* OR addr mask - map 64 MB */
+#define CONFIG_SYS_PRELIM_OR_AM	0xFC000000	/* OR addr mask - map 64 MB */
 
 /* FLASH timing: ACS = 0, TRLX = 0, CSNT = 0, SCY = 4, ETHR = 0, BIH = 1 */
-#define CFG_OR_TIMING_FLASH (OR_SCY_4_CLK | OR_BI)
+#define CONFIG_SYS_OR_TIMING_FLASH (OR_SCY_4_CLK | OR_BI)
 
-#define CFG_OR0_PRELIM	(CFG_PRELIM_OR_AM | CFG_OR_TIMING_FLASH)
-#define CFG_BR0_PRELIM	((FLASH_BASE_PRELIM & BR_BA_MSK) | BR_V)
+#define CONFIG_SYS_OR0_PRELIM	(CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_FLASH)
+#define CONFIG_SYS_BR0_PRELIM	((FLASH_BASE_PRELIM & BR_BA_MSK) | BR_V)
 
 /*
  * BR1 and OR1 (SDRAM)
@@ -343,39 +343,39 @@
 #define	SDRAM_MAX_SIZE		0x08000000	/* max 128 MB */
 
 /* SDRAM timing: Multiplexed addresses, GPL5 output to GPL5_A (don't care)	*/
-#define CFG_OR_TIMING_SDRAM	0x00000E00
+#define CONFIG_SYS_OR_TIMING_SDRAM	0x00000E00
 
-#define CFG_OR1_PRELIM	(0xF0000000 | CFG_OR_TIMING_SDRAM ) /* map 256 MB */
-#define CFG_BR1_PRELIM	((SDRAM_BASE_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
+#define CONFIG_SYS_OR1_PRELIM	(0xF0000000 | CONFIG_SYS_OR_TIMING_SDRAM ) /* map 256 MB */
+#define CONFIG_SYS_BR1_PRELIM	((SDRAM_BASE_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
 
 /* RPXLITE mem setting */
-#define CFG_NVRAM_BASE	0xFA000000		/* NVRAM & SRAM base */
+#define CONFIG_SYS_NVRAM_BASE	0xFA000000		/* NVRAM & SRAM base */
 /*      IMMR:		0xFA200000		   IMMR base address - see above */
-#define	CFG_BCSR_BASE	0xFA400000		/* BCSR base address */
+#define	CONFIG_SYS_BCSR_BASE	0xFA400000		/* BCSR base address */
 
-#define	CFG_BR3_PRELIM	(CFG_BCSR_BASE | BR_V)			/* BCSR */
-#define CFG_OR3_PRELIM	0xFFFF8910
-#define CFG_BR4_PRELIM  (CFG_NVRAM_BASE | BR_PS_8 | BR_V)	/* NVRAM & SRAM */
-#define CFG_OR4_PRELIM	0xFFFE0970
+#define	CONFIG_SYS_BR3_PRELIM	(CONFIG_SYS_BCSR_BASE | BR_V)			/* BCSR */
+#define CONFIG_SYS_OR3_PRELIM	0xFFFF8910
+#define CONFIG_SYS_BR4_PRELIM  (CONFIG_SYS_NVRAM_BASE | BR_PS_8 | BR_V)	/* NVRAM & SRAM */
+#define CONFIG_SYS_OR4_PRELIM	0xFFFE0970
 
 /*
  * Memory Periodic Timer Prescaler
  */
 
 /* periodic timer for refresh */
-#define CFG_MAMR_PTA	20
+#define CONFIG_SYS_MAMR_PTA	20
 
 /*
  * Refresh clock Prescalar
  */
-#define CFG_MPTPR	MPTPR_PTP_DIV2
+#define CONFIG_SYS_MPTPR	MPTPR_PTP_DIV2
 
 /*
  * MAMR settings for SDRAM
  */
 
 /* 9 column SDRAM */
-#define CFG_MAMR_9COL	((CFG_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
+#define CONFIG_SYS_MAMR_9COL	((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
 			 MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 |	\
 			 MAMR_RLFA_16X | MAMR_WLFA_16X | MAMR_TLFA_16X)
 
@@ -394,10 +394,10 @@
  *
  */
 
-#define BCSR0	(CFG_BCSR_BASE + 0)
-#define BCSR1	(CFG_BCSR_BASE + 1)
-#define BCSR2	(CFG_BCSR_BASE + 2)
-#define BCSR3	(CFG_BCSR_BASE + 3)
+#define BCSR0	(CONFIG_SYS_BCSR_BASE + 0)
+#define BCSR1	(CONFIG_SYS_BCSR_BASE + 1)
+#define BCSR2	(CONFIG_SYS_BCSR_BASE + 2)
+#define BCSR3	(CONFIG_SYS_BCSR_BASE + 3)
 
 #define BCSR0_ENMONXCVR	0x01	/* Monitor XVCR Control */
 #define BCSR0_ENNVRAM	0x02	/* CS4# Control */
diff --git a/include/configs/rsdproto.h b/include/configs/rsdproto.h
index 6251383f5..820784496 100644
--- a/include/configs/rsdproto.h
+++ b/include/configs/rsdproto.h
@@ -79,10 +79,10 @@
  * - Select bus for bd/buffers (see 28-13)
  * - Enable Full Duplex in FSMR
  */
-# define CFG_CMXFCR_MASK	(CMXFCR_FC2 | CMXFCR_RF2CS_MSK | CMXFCR_TF2CS_MSK)
-# define CFG_CMXFCR_VALUE	(CMXFCR_RF2CS_CLK13 | CMXFCR_TF2CS_CLK14)
-# define CFG_CPMFCR_RAMTYPE	(0)
-# define CFG_FCC_PSMR		(FCC_PSMR_FDE | FCC_PSMR_LPB)
+# define CONFIG_SYS_CMXFCR_MASK	(CMXFCR_FC2 | CMXFCR_RF2CS_MSK | CMXFCR_TF2CS_MSK)
+# define CONFIG_SYS_CMXFCR_VALUE	(CMXFCR_RF2CS_CLK13 | CMXFCR_TF2CS_CLK14)
+# define CONFIG_SYS_CPMFCR_RAMTYPE	(0)
+# define CONFIG_SYS_FCC_PSMR		(FCC_PSMR_FDE | FCC_PSMR_LPB)
 
 #endif /* CONFIG_ETHER_INDEX */
 
@@ -92,8 +92,8 @@
 
 /* enable I2C */
 #define CONFIG_HARD_I2C		1	/* I2C with hardware support */
-#define CFG_I2C_SPEED		50000	/* I2C speed and slave address */
-#define CFG_I2C_SLAVE		0x30
+#define CONFIG_SYS_I2C_SPEED		50000	/* I2C speed and slave address */
+#define CONFIG_SYS_I2C_SLAVE		0x30
 
 
 /* system clock rate (CLKIN) - equal to the 60x and local bus speed */
@@ -125,7 +125,7 @@
  * way to do that is to program the bootloader at both addresses.
  * It is suggested that you just let U-Boot live at 0x00000000.
  */
-#define CFG_RSD_BOOT_LOW 1
+#define CONFIG_SYS_RSD_BOOT_LOW 1
 
 #define CONFIG_BOOTDELAY	5
 #define CONFIG_BOOTARGS		"devfs=mount root=ramfs"
@@ -140,26 +140,26 @@
 /*
  * Miscellaneous configurable options
  */
-#define	CFG_LONGHELP				/* undef to save memory		*/
-#define	CFG_PROMPT		"=> "		/* Monitor Command Prompt	*/
+#define	CONFIG_SYS_LONGHELP				/* undef to save memory		*/
+#define	CONFIG_SYS_PROMPT		"=> "		/* Monitor Command Prompt	*/
 #if defined(CONFIG_CMD_KGDB)
-#define	CFG_CBSIZE		1024		/* Console I/O Buffer Size	*/
+#define	CONFIG_SYS_CBSIZE		1024		/* Console I/O Buffer Size	*/
 #else
-#define	CFG_CBSIZE		256		/* Console I/O Buffer Size	*/
+#define	CONFIG_SYS_CBSIZE		256		/* Console I/O Buffer Size	*/
 #endif
-#define	CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define	CFG_MAXARGS		16		/* max number of command args	*/
-#define CFG_BARGSIZE		CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+#define	CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define	CONFIG_SYS_MAXARGS		16		/* max number of command args	*/
+#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
 
-#define CFG_MEMTEST_START	0x00400000	/* memtest works on	*/
-#define CFG_MEMTEST_END		0x01c00000	/* 4 ... 28 MB in DRAM	*/
+#define CONFIG_SYS_MEMTEST_START	0x00400000	/* memtest works on	*/
+#define CONFIG_SYS_MEMTEST_END		0x01c00000	/* 4 ... 28 MB in DRAM	*/
 
-#define	CFG_LOAD_ADDR		0x100000	/* default load address	*/
+#define	CONFIG_SYS_LOAD_ADDR		0x100000	/* default load address	*/
 
-#define	CFG_HZ			1000		/* decrementer freq: 1 ms ticks	*/
+#define	CONFIG_SYS_HZ			1000		/* decrementer freq: 1 ms ticks	*/
 
 						/* valid baudrates */
-#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
 
 /*
  * Low Level Configuration Settings
@@ -199,108 +199,108 @@
 #define PHYS_FLASH		0xFF000000 /* Flash (60x Bus) */
 #define PHYS_FLASH_SIZE		0x01000000 /* 16 MB */
 
-#define CFG_IMMR		PHYS_IMMR
+#define CONFIG_SYS_IMMR		PHYS_IMMR
 
 /*-----------------------------------------------------------------------
  * Reset Address
  *
  * In order to reset the CPU, U-Boot jumps to a special address which
  * causes a machine check exception. The default address for this is
- * CFG_MONITOR_BASE - sizeof (ulong), which might not always work, eg. when
+ * CONFIG_SYS_MONITOR_BASE - sizeof (ulong), which might not always work, eg. when
  * testing the monitor in RAM using a JTAG debugger.
  *
- * Just set CFG_RESET_ADDRESS to an address that you know is sure to
+ * Just set CONFIG_SYS_RESET_ADDRESS to an address that you know is sure to
  * cause a bus error on your hardware.
  */
-#define CFG_RESET_ADDRESS	0x20000000
+#define CONFIG_SYS_RESET_ADDRESS	0x20000000
 
 /*-----------------------------------------------------------------------
  * Hard Reset Configuration Words
  */
 
-#if defined(CFG_RSD_BOOT_LOW)
-#  define  CFG_RSD_HRCW_BOOT_FLAGS  (HRCW_CIP | HRCW_BMS)
+#if defined(CONFIG_SYS_RSD_BOOT_LOW)
+#  define  CONFIG_SYS_RSD_HRCW_BOOT_FLAGS  (HRCW_CIP | HRCW_BMS)
 #else
-#  define  CFG_RSD_HRCW_BOOT_FLAGS  (0)
-#endif /* defined(CFG_RSD_BOOT_LOW) */
+#  define  CONFIG_SYS_RSD_HRCW_BOOT_FLAGS  (0)
+#endif /* defined(CONFIG_SYS_RSD_BOOT_LOW) */
 
-/* get the HRCW ISB field from CFG_IMMR */
-#define CFG_RSD_HRCW_IMMR ( ((CFG_IMMR & 0x10000000) >> 10) |\
-			    ((CFG_IMMR & 0x01000000) >> 7)  |\
-			    ((CFG_IMMR & 0x00100000) >> 4) )
+/* get the HRCW ISB field from CONFIG_SYS_IMMR */
+#define CONFIG_SYS_RSD_HRCW_IMMR ( ((CONFIG_SYS_IMMR & 0x10000000) >> 10) |\
+			    ((CONFIG_SYS_IMMR & 0x01000000) >> 7)  |\
+			    ((CONFIG_SYS_IMMR & 0x00100000) >> 4) )
 
-#define CFG_HRCW_MASTER	(HRCW_L2CPC10 | \
+#define CONFIG_SYS_HRCW_MASTER	(HRCW_L2CPC10 | \
 			 HRCW_DPPC11 | \
-			 CFG_RSD_HRCW_IMMR |\
+			 CONFIG_SYS_RSD_HRCW_IMMR |\
 			 HRCW_MMR00 | \
 			 HRCW_APPC10 | \
 			 HRCW_CS10PC00 | \
 			 HRCW_MODCK_H0000 |\
-			 CFG_RSD_HRCW_BOOT_FLAGS)
+			 CONFIG_SYS_RSD_HRCW_BOOT_FLAGS)
 
 /* no slaves */
-#define CFG_HRCW_SLAVE1	0
-#define CFG_HRCW_SLAVE2	0
-#define CFG_HRCW_SLAVE3	0
-#define CFG_HRCW_SLAVE4	0
-#define CFG_HRCW_SLAVE5	0
-#define CFG_HRCW_SLAVE6	0
-#define CFG_HRCW_SLAVE7	0
+#define CONFIG_SYS_HRCW_SLAVE1	0
+#define CONFIG_SYS_HRCW_SLAVE2	0
+#define CONFIG_SYS_HRCW_SLAVE3	0
+#define CONFIG_SYS_HRCW_SLAVE4	0
+#define CONFIG_SYS_HRCW_SLAVE5	0
+#define CONFIG_SYS_HRCW_SLAVE6	0
+#define CONFIG_SYS_HRCW_SLAVE7	0
 
 /*-----------------------------------------------------------------------
  * Definitions for initial stack pointer and data area (in DPRAM)
  */
-#define CFG_INIT_RAM_ADDR	CFG_IMMR
-#define	CFG_INIT_RAM_END	0x4000	/* End of used area in DPRAM	*/
-#define	CFG_GBL_DATA_SIZE	128  /* size in bytes reserved for initial data */
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define	CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_IMMR
+#define	CONFIG_SYS_INIT_RAM_END	0x4000	/* End of used area in DPRAM	*/
+#define	CONFIG_SYS_GBL_DATA_SIZE	128  /* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define	CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
 /*-----------------------------------------------------------------------
  * Start addresses for the final memory configuration
  * (Set up by the startup code)
- * Please note that CFG_SDRAM_BASE _must_ start at 0
- * Note also that the logic that sets CFG_RAMBOOT is platform dependend.
+ * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
+ * Note also that the logic that sets CONFIG_SYS_RAMBOOT is platform dependend.
  */
-#define	CFG_SDRAM_BASE		PHYS_SDRAM_60X
-#define CFG_FLASH_BASE		PHYS_FLASH
-/*#define	CFG_MONITOR_BASE	0x200000 */
-#define	CFG_MONITOR_BASE	CFG_FLASH_BASE
-#if CFG_MONITOR_BASE < CFG_FLASH_BASE
-#define CFG_RAMBOOT
+#define	CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM_60X
+#define CONFIG_SYS_FLASH_BASE		PHYS_FLASH
+/*#define	CONFIG_SYS_MONITOR_BASE	0x200000 */
+#define	CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_FLASH_BASE
+#if CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE
+#define CONFIG_SYS_RAMBOOT
 #endif
-#define	CFG_MONITOR_LEN		(160 << 10)	/* Reserve 160 kB for Monitor	*/
-#define	CFG_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/
+#define	CONFIG_SYS_MONITOR_LEN		(160 << 10)	/* Reserve 160 kB for Monitor	*/
+#define	CONFIG_SYS_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/
 
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define	CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux	*/
+#define	CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux	*/
 
 /*-----------------------------------------------------------------------
  * FLASH and environment organization
  */
-#define CFG_MAX_FLASH_BANKS	2	/* max number of memory banks		*/
-#define CFG_MAX_FLASH_SECT	63	/* max number of sectors on one chip	*/
+#define CONFIG_SYS_MAX_FLASH_BANKS	2	/* max number of memory banks		*/
+#define CONFIG_SYS_MAX_FLASH_SECT	63	/* max number of sectors on one chip	*/
 
-#define CFG_FLASH_ERASE_TOUT	12000	/* Timeout for Flash Erase (in ms)	*/
-#define CFG_FLASH_WRITE_TOUT	3000	/* Timeout for Flash Write (in ms)	*/
+#define CONFIG_SYS_FLASH_ERASE_TOUT	12000	/* Timeout for Flash Erase (in ms)	*/
+#define CONFIG_SYS_FLASH_WRITE_TOUT	3000	/* Timeout for Flash Write (in ms)	*/
 
 /* turn off NVRAM env feature */
 #undef CONFIG_NVRAM_ENV
 
-#define	CFG_ENV_IS_IN_FLASH	1
-#define CFG_ENV_ADDR	(PHYS_FLASH + 0x28000)	/* Addr of Environment Sector	*/
-#define CFG_ENV_SECT_SIZE	0x8000	/* Total Size of Environment Sector	*/
+#define	CONFIG_ENV_IS_IN_FLASH	1
+#define CONFIG_ENV_ADDR	(PHYS_FLASH + 0x28000)	/* Addr of Environment Sector	*/
+#define CONFIG_ENV_SECT_SIZE	0x8000	/* Total Size of Environment Sector	*/
 
 /*-----------------------------------------------------------------------
  * Cache Configuration
  */
-#define CFG_CACHELINE_SIZE	32	/* For MPC8260 CPU			*/
+#define CONFIG_SYS_CACHELINE_SIZE	32	/* For MPC8260 CPU			*/
 #if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value	*/
+#define CONFIG_SYS_CACHELINE_SHIFT	5	/* log base 2 of the above value	*/
 #endif
 
 /*-----------------------------------------------------------------------
@@ -313,28 +313,28 @@
  *
  * HID1 has only read-only information - nothing to set.
  */
-#define CFG_HID0_INIT	(HID0_ICE|HID0_DCE|HID0_ICFI|HID0_DCI|HID0_IFEM|HID0_ABE)
-#define CFG_HID0_FINAL	(HID0_ICE|HID0_IFEM|HID0_ABE|HID0_EMCP)
-#define CFG_HID2	0
+#define CONFIG_SYS_HID0_INIT	(HID0_ICE|HID0_DCE|HID0_ICFI|HID0_DCI|HID0_IFEM|HID0_ABE)
+#define CONFIG_SYS_HID0_FINAL	(HID0_ICE|HID0_IFEM|HID0_ABE|HID0_EMCP)
+#define CONFIG_SYS_HID2	0
 
 /*-----------------------------------------------------------------------
  * RMR - Reset Mode Register
  *-----------------------------------------------------------------------
  */
-#define CFG_RMR		0
+#define CONFIG_SYS_RMR		0
 
 /*-----------------------------------------------------------------------
  * BCR - Bus Configuration					 4-25
  *-----------------------------------------------------------------------
  */
-#define CFG_BCR		0x100c0000
+#define CONFIG_SYS_BCR		0x100c0000
 
 /*-----------------------------------------------------------------------
  * SIUMCR - SIU Module Configuration				 4-31
  *-----------------------------------------------------------------------
  */
 
-#define CFG_SIUMCR	(SIUMCR_DPPC11 | SIUMCR_L2CPC10 | SIUMCR_APPC10 | \
+#define CONFIG_SYS_SIUMCR	(SIUMCR_DPPC11 | SIUMCR_L2CPC10 | SIUMCR_APPC10 | \
 					 SIUMCR_CS10PC01 | SIUMCR_BCTLC01)
 
 /*-----------------------------------------------------------------------
@@ -343,7 +343,7 @@
  *-----------------------------------------------------------------------
  * Watchdog & Bus Monitor Timer max, 60x Bus Monitor enable
  */
-#define CFG_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_PBME | SYPCR_LBME | \
+#define CONFIG_SYS_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_PBME | SYPCR_LBME | \
 			 SYPCR_SWRI | SYPCR_SWP)
 
 /*-----------------------------------------------------------------------
@@ -352,7 +352,7 @@
  * Clear once per Second and Alarm Interrupt Status, Set 32KHz timersclk,
  * and enable Time Counter
  */
-#define CFG_TMCNTSC	(TMCNTSC_SEC | TMCNTSC_ALR | TMCNTSC_TCF | TMCNTSC_TCE)
+#define CONFIG_SYS_TMCNTSC	(TMCNTSC_SEC | TMCNTSC_ALR | TMCNTSC_TCF | TMCNTSC_TCE)
 
 /*-----------------------------------------------------------------------
  * PISCR - Periodic Interrupt Status and Control		 4-42
@@ -360,63 +360,63 @@
  * Clear Periodic Interrupt Status, Set 32KHz timersclk, and enable
  * Periodic timer
  */
-#define CFG_PISCR	(PISCR_PS|PISCR_PTF|PISCR_PTE)
+#define CONFIG_SYS_PISCR	(PISCR_PS|PISCR_PTF|PISCR_PTE)
 
 /*-----------------------------------------------------------------------
  * SCCR - System Clock Control					 9-8
  *-----------------------------------------------------------------------
  */
-#define CFG_SCCR	0x00000000
+#define CONFIG_SYS_SCCR	0x00000000
 
 /*-----------------------------------------------------------------------
  * RCCR - RISC Controller Configuration				13-7
  *-----------------------------------------------------------------------
  */
-#define CFG_RCCR	0
+#define CONFIG_SYS_RCCR	0
 
 /*
  * Init Memory Controller:
  */
 
-#define CFG_PSDMR	0x494D2452
-#define CFG_LSDMR	0x49492552
+#define CONFIG_SYS_PSDMR	0x494D2452
+#define CONFIG_SYS_LSDMR	0x49492552
 
 /* Flash */
-#define CFG_BR0_PRELIM	(PHYS_FLASH | BRx_V)
-#define CFG_OR0_PRELIM	(P2SZ_TO_AM(PHYS_FLASH_SIZE) | \
+#define CONFIG_SYS_BR0_PRELIM	(PHYS_FLASH | BRx_V)
+#define CONFIG_SYS_OR0_PRELIM	(P2SZ_TO_AM(PHYS_FLASH_SIZE) | \
 			 ORxG_BCTLD | \
 			 ORxG_SCY_5_CLK)
 
 /* DPRAM to the PCI BUS on the protocol board */
-#define CFG_BR1_PRELIM	(PHYS_DPRAM_PCI | BRx_V)
-#define CFG_OR1_PRELIM	(P2SZ_TO_AM(PHYS_DPRAM_PCI_SIZE) | \
+#define CONFIG_SYS_BR1_PRELIM	(PHYS_DPRAM_PCI | BRx_V)
+#define CONFIG_SYS_OR1_PRELIM	(P2SZ_TO_AM(PHYS_DPRAM_PCI_SIZE) | \
 			 ORxG_ACS_DIV4)
 
 /* 60x Bus SDRAM */
-#define CFG_BR2_PRELIM	(PHYS_SDRAM_60X | BRx_MS_SDRAM_P | BRx_V)
-#define CFG_OR2_PRELIM	(ORxS_SIZE_TO_AM(PHYS_SDRAM_60X_SIZE) | \
+#define CONFIG_SYS_BR2_PRELIM	(PHYS_SDRAM_60X | BRx_MS_SDRAM_P | BRx_V)
+#define CONFIG_SYS_OR2_PRELIM	(ORxS_SIZE_TO_AM(PHYS_SDRAM_60X_SIZE) | \
 			 ORxS_BPD_4 | \
 			 ORxS_ROWST_PBI1_A2 | \
 			 ORxS_NUMR_13 | \
 			 ORxS_IBID)
 
 /* Virtex-FPGA - Register */
-#define CFG_BR3_PRELIM  (PHYS_VIRTEX_REGISTER | BRx_V)
-#define CFG_OR3_PRELIM  (ORxS_SIZE_TO_AM(PHYS_VIRTEX_REGISTER_SIZE) | \
+#define CONFIG_SYS_BR3_PRELIM  (PHYS_VIRTEX_REGISTER | BRx_V)
+#define CONFIG_SYS_OR3_PRELIM  (ORxS_SIZE_TO_AM(PHYS_VIRTEX_REGISTER_SIZE) | \
 			 ORxG_SCY_1_CLK | \
 			 ORxG_ACS_DIV2 | \
 			 ORxG_CSNT )
 
 /* local bus SDRAM */
-#define CFG_BR4_PRELIM	(PHYS_SDRAM_LOCAL | BRx_PS_32 | BRx_MS_SDRAM_L | BRx_V)
-#define CFG_OR4_PRELIM	(ORxS_SIZE_TO_AM(PHYS_SDRAM_LOCAL_SIZE) | \
+#define CONFIG_SYS_BR4_PRELIM	(PHYS_SDRAM_LOCAL | BRx_PS_32 | BRx_MS_SDRAM_L | BRx_V)
+#define CONFIG_SYS_OR4_PRELIM	(ORxS_SIZE_TO_AM(PHYS_SDRAM_LOCAL_SIZE) | \
 			 ORxS_BPD_4 | \
 			 ORxS_ROWST_PBI1_A4 | \
 			 ORxS_NUMR_13)
 
 /* DPRAM to the Sharc-Bus on the protocol board */
-#define CFG_BR5_PRELIM	(PHYS_DPRAM_SHARC | BRx_V)
-#define CFG_OR5_PRELIM	(P2SZ_TO_AM(PHYS_DPRAM_SHARC_SIZE) | \
+#define CONFIG_SYS_BR5_PRELIM	(PHYS_DPRAM_SHARC | BRx_V)
+#define CONFIG_SYS_OR5_PRELIM	(P2SZ_TO_AM(PHYS_DPRAM_SHARC_SIZE) | \
 			 ORxG_ACS_DIV4)
 
 /*
diff --git a/include/configs/rsk7203.h b/include/configs/rsk7203.h
index 23598f33c..f88a77340 100644
--- a/include/configs/rsk7203.h
+++ b/include/configs/rsk7203.h
@@ -54,54 +54,59 @@
 #define RSK7203_FLASH_BASE_1	0x20000000	/* Non cache */
 #define RSK7203_FLASH_BANK_SIZE	(4 * 1024 * 1024)
 
-#define CFG_LONGHELP		/* undef to save memory	*/
-#define CFG_PROMPT	"=> "	/* Monitor Command Prompt */
-#define CFG_CBSIZE	256	/* Buffer size for input from the Console */
-#define CFG_PBSIZE	256	/* Buffer size for Console output */
-#define CFG_MAXARGS	16	/* max args accepted for monitor commands */
+#define CONFIG_SYS_LONGHELP		/* undef to save memory	*/
+#define CONFIG_SYS_PROMPT	"=> "	/* Monitor Command Prompt */
+#define CONFIG_SYS_CBSIZE	256	/* Buffer size for input from the Console */
+#define CONFIG_SYS_PBSIZE	256	/* Buffer size for Console output */
+#define CONFIG_SYS_MAXARGS	16	/* max args accepted for monitor commands */
 /* Buffer size for Boot Arguments passed to kernel */
-#define CFG_BARGSIZE	512
+#define CONFIG_SYS_BARGSIZE	512
 /* List of legal baudrate settings for this board */
-#define CFG_BAUDRATE_TABLE	{ 115200 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 115200 }
 
 /* SCIF */
 #define CONFIG_SCIF_CONSOLE	1
 #define CONFIG_CONS_SCIF0	1
 
-#define CFG_MEMTEST_START	RSK7203_SDRAM_BASE
-#define CFG_MEMTEST_END		(CFG_MEMTEST_START + (3 * 1024 * 1024))
+#define CONFIG_SYS_MEMTEST_START	RSK7203_SDRAM_BASE
+#define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_MEMTEST_START + (3 * 1024 * 1024))
 
-#define CFG_SDRAM_BASE		RSK7203_SDRAM_BASE
-#define CFG_SDRAM_SIZE		(32 * 1024 * 1024)
+#define CONFIG_SYS_SDRAM_BASE		RSK7203_SDRAM_BASE
+#define CONFIG_SYS_SDRAM_SIZE		(32 * 1024 * 1024)
 
-#define CFG_LOAD_ADDR		(CFG_SDRAM_BASE + 1024 * 1024)
-#define CFG_MONITOR_BASE	RSK7203_FLASH_BASE_1
-#define CFG_MONITOR_LEN		(128 * 1024)
-#define CFG_MALLOC_LEN		(256 * 1024)
-#define CFG_GBL_DATA_SIZE	256
-#define CFG_BOOTMAPSZ		(8 * 1024 * 1024)
+#define CONFIG_SYS_LOAD_ADDR		(CONFIG_SYS_SDRAM_BASE + 1024 * 1024)
+#define CONFIG_SYS_MONITOR_BASE	RSK7203_FLASH_BASE_1
+#define CONFIG_SYS_MONITOR_LEN		(128 * 1024)
+#define CONFIG_SYS_MALLOC_LEN		(256 * 1024)
+#define CONFIG_SYS_GBL_DATA_SIZE	256
+#define CONFIG_SYS_BOOTMAPSZ		(8 * 1024 * 1024)
 
 /* FLASH */
 #define CONFIG_FLASH_CFI_DRIVER
-#define CFG_FLASH_CFI
-#define CFG_FLASH_CFI_WIDTH FLASH_CFI_16BIT
-#undef	CFG_FLASH_QUIET_TEST
-#define CFG_FLASH_EMPTY_INFO	/* print 'E' for empty sector on flinfo */
-#define CFG_FLASH_BASE		RSK7203_FLASH_BASE_1
-#define CFG_FLASH_BANKS_LIST	{ CFG_FLASH_BASE }
-#define CFG_MAX_FLASH_SECT	64
-#define CFG_MAX_FLASH_BANKS	1
-
-#define CFG_ENV_IS_IN_FLASH
-#define CFG_ENV_SECT_SIZE	(64 * 1024)
-#define CFG_ENV_SIZE		CFG_ENV_SECT_SIZE
-#define CFG_ENV_ADDR		(CFG_MONITOR_BASE + CFG_MONITOR_LEN)
-#define CFG_FLASH_ERASE_TOUT	12000
-#define CFG_FLASH_WRITE_TOUT	500
+#define CONFIG_SYS_FLASH_CFI
+#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT
+#undef	CONFIG_SYS_FLASH_QUIET_TEST
+#define CONFIG_SYS_FLASH_EMPTY_INFO	/* print 'E' for empty sector on flinfo */
+#define CONFIG_SYS_FLASH_BASE		RSK7203_FLASH_BASE_1
+#define CONFIG_SYS_FLASH_BANKS_LIST	{ CONFIG_SYS_FLASH_BASE }
+#define CONFIG_SYS_MAX_FLASH_SECT	64
+#define CONFIG_SYS_MAX_FLASH_BANKS	1
+
+#define CONFIG_ENV_IS_IN_FLASH
+#define CONFIG_ENV_SECT_SIZE	(64 * 1024)
+#define CONFIG_ENV_SIZE		CONFIG_ENV_SECT_SIZE
+#define CONFIG_ENV_ADDR		(CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)
+#define CONFIG_SYS_FLASH_ERASE_TOUT	12000
+#define CONFIG_SYS_FLASH_WRITE_TOUT	500
 
 /* Board Clock */
 #define CONFIG_SYS_CLK_FREQ	33333333
 #define CMT_CLK_DIVIDER	32	/* 8 (default), 32, 128 or 512 */
-#define CFG_HZ			(CONFIG_SYS_CLK_FREQ / CMT_CLK_DIVIDER)
+#define CONFIG_SYS_HZ			(CONFIG_SYS_CLK_FREQ / CMT_CLK_DIVIDER)
+
+/* Network interface */
+#define CONFIG_DRIVER_SMC911X
+#define CONFIG_DRIVER_SMC911X_16_BIT
+#define CONFIG_DRIVER_SMC911X_BASE (0x24000000)
 
 #endif	/* __RSK7203_H */
diff --git a/include/configs/sacsng.h b/include/configs/sacsng.h
index 8427752d7..f4e08c689 100644
--- a/include/configs/sacsng.h
+++ b/include/configs/sacsng.h
@@ -74,7 +74,7 @@
  * 0x6	     0x1	 66	133    266   Close  Close  Open
  * 0x6	     0x2	 66	133    300   Close  Open   Close
  */
-#define CFG_SBC_MODCK_H 0x05
+#define CONFIG_SYS_SBC_MODCK_H 0x05
 
 /* Define this if you want to boot from 0x00000100. If you don't define
  * this, you will need to program the bootloader to 0xfff00000, and
@@ -82,21 +82,21 @@
  * way to do that is to program the bootloader at both addresses.
  * It is suggested that you just let U-Boot live at 0x00000000.
  */
-#define CFG_SBC_BOOT_LOW 1
+#define CONFIG_SYS_SBC_BOOT_LOW 1
 
 /* What should the base address of the main FLASH be and how big is
  * it (in MBytes)?  This must contain TEXT_BASE from board/sacsng/config.mk
  * The main FLASH is whichever is connected to *CS0.
  */
-#define CFG_FLASH0_BASE 0x40000000
-#define CFG_FLASH0_SIZE 2
+#define CONFIG_SYS_FLASH0_BASE 0x40000000
+#define CONFIG_SYS_FLASH0_SIZE 2
 
 /* What should the base address of the secondary FLASH be and how big
  * is it (in Mbytes)?  The secondary FLASH is whichever is connected
  * to *CS6.
  */
-#define CFG_FLASH1_BASE 0x60000000
-#define CFG_FLASH1_SIZE 2
+#define CONFIG_SYS_FLASH1_BASE 0x60000000
+#define CONFIG_SYS_FLASH1_SIZE 2
 
 /* Define CONFIG_VERY_BIG_RAM to allow use of SDRAMs larger than 256MBytes
  */
@@ -105,8 +105,8 @@
 /* What should be the base address of SDRAM DIMM and how big is
  * it (in Mbytes)?  This will normally auto-configure via the SPD.
 */
-#define CFG_SDRAM0_BASE 0x00000000
-#define CFG_SDRAM0_SIZE 64
+#define CONFIG_SYS_SDRAM0_BASE 0x00000000
+#define CONFIG_SYS_SDRAM0_SIZE 64
 
 /*
  * Memory map example with 64 MB DIMM:
@@ -124,15 +124,15 @@
  *		       Monitor Stack Buffer (0x80)
  *     0x03F5 FFB0     Board Info Data
  *     0x03F6 0000     Malloc Arena
- *	     :		    CFG_ENV_SECT_SIZE, 16k
- *	     :		    CFG_MALLOC_LEN,    128k
+ *	     :		    CONFIG_ENV_SECT_SIZE, 16k
+ *	     :		    CONFIG_SYS_MALLOC_LEN,    128k
  *     0x03FC 0000     RAM Copy of Monitor Code
- *	     :		    CFG_MONITOR_LEN,   256k
- *     0x03FF FFFF     [End of RAM], CFG_SDRAM_SIZE - 1
+ *	     :		    CONFIG_SYS_MONITOR_LEN,   256k
+ *     0x03FF FFFF     [End of RAM], CONFIG_SYS_SDRAM_SIZE - 1
  */
 
-#define CONFIG_POST		(CFG_POST_MEMORY | \
-				 CFG_POST_CPU)
+#define CONFIG_POST		(CONFIG_SYS_POST_MEMORY | \
+				 CONFIG_SYS_POST_CPU)
 
 
 /*
@@ -198,7 +198,7 @@
  *  - RX clk is CLK11
  *  - TX clk is CLK12
  */
-# define CFG_CMXSCR_VALUE	(CMXSCR_RS1CS_CLK11  | CMXSCR_TS1CS_CLK12)
+# define CONFIG_SYS_CMXSCR_VALUE	(CMXSCR_RS1CS_CLK11  | CMXSCR_TS1CS_CLK12)
 
 #elif defined(CONFIG_ETHER_ON_FCC) && (CONFIG_ETHER_INDEX == 2)
 
@@ -208,10 +208,10 @@
  * - Select bus for bd/buffers (see 28-13)
  * - Enable Full Duplex in FSMR
  */
-# define CFG_CMXFCR_MASK	(CMXFCR_FC2|CMXFCR_RF2CS_MSK|CMXFCR_TF2CS_MSK)
-# define CFG_CMXFCR_VALUE	(CMXFCR_RF2CS_CLK13|CMXFCR_TF2CS_CLK14)
-# define CFG_CPMFCR_RAMTYPE	0
-# define CFG_FCC_PSMR		(FCC_PSMR_FDE | FCC_PSMR_LPB)
+# define CONFIG_SYS_CMXFCR_MASK	(CMXFCR_FC2|CMXFCR_RF2CS_MSK|CMXFCR_TF2CS_MSK)
+# define CONFIG_SYS_CMXFCR_VALUE	(CMXFCR_RF2CS_CLK13|CMXFCR_TF2CS_CLK14)
+# define CONFIG_SYS_CPMFCR_RAMTYPE	0
+# define CONFIG_SYS_FCC_PSMR		(FCC_PSMR_FDE | FCC_PSMR_LPB)
 
 #endif /* CONFIG_ETHER_ON_FCC, CONFIG_ETHER_INDEX */
 
@@ -220,7 +220,7 @@
 /*
  * Configure for RAM tests.
  */
-#undef  CFG_DRAM_TEST			/* calls other tests in board.c	*/
+#undef  CONFIG_SYS_DRAM_TEST			/* calls other tests in board.c	*/
 
 
 /*
@@ -234,13 +234,13 @@
 #define STATUS_LED_DAT		im_ioport.iop_pdata
 
 #define STATUS_LED_BIT		0x00000800	/* LED 0 is on PA.20	*/
-#define STATUS_LED_PERIOD	(CFG_HZ)
+#define STATUS_LED_PERIOD	(CONFIG_SYS_HZ)
 #define STATUS_LED_STATE	STATUS_LED_OFF
 #define STATUS_LED_BIT1		0x00001000	/* LED 1 is on PA.19	*/
-#define STATUS_LED_PERIOD1	(CFG_HZ)
+#define STATUS_LED_PERIOD1	(CONFIG_SYS_HZ)
 #define STATUS_LED_STATE1	STATUS_LED_OFF
 #define STATUS_LED_BIT2		0x00002000	/* LED 2 is on PA.18	*/
-#define STATUS_LED_PERIOD2	(CFG_HZ/2)
+#define STATUS_LED_PERIOD2	(CONFIG_SYS_HZ/2)
 #define STATUS_LED_STATE2	STATUS_LED_ON
 
 #define STATUS_LED_ACTIVE	0		/* LED on for bit == 0	*/
@@ -293,8 +293,8 @@
  */
 #undef  CONFIG_HARD_I2C			/* I2C with hardware support	*/
 #define CONFIG_SOFT_I2C		1	/* I2C bit-banged		*/
-#define CFG_I2C_SPEED		400000	/* I2C speed and slave address	*/
-#define CFG_I2C_SLAVE		0x7F
+#define CONFIG_SYS_I2C_SPEED		400000	/* I2C speed and slave address	*/
+#define CONFIG_SYS_I2C_SLAVE		0x7F
 
 /*
  * Software (bit-bang) I2C driver configuration
@@ -316,7 +316,7 @@
  * put in the same sector as U-Boot, and changing variables
  * will erase U-Boot temporarily
  */
-#define CFG_ENV_IN_OWN_SECT	1
+#define CONFIG_ENV_IN_OWN_SECT	1
 
 /* Define this to contain any number of null terminated strings that
  * will be part of the default enviroment compiled into the boot image.
@@ -486,14 +486,14 @@
 
 
 /* undef this to save memory */
-#define CFG_LONGHELP
+#define CONFIG_SYS_LONGHELP
 
 /* Monitor Command Prompt */
-#define CFG_PROMPT		"=> "
+#define CONFIG_SYS_PROMPT		"=> "
 
-#undef  CFG_HUSH_PARSER
-#ifdef  CFG_HUSH_PARSER
-#define CFG_PROMPT_HUSH_PS2     "> "
+#undef  CONFIG_SYS_HUSH_PARSER
+#ifdef  CONFIG_SYS_HUSH_PARSER
+#define CONFIG_SYS_PROMPT_HUSH_PS2     "> "
 #endif
 
 /* When CONFIG_TIMESTAMP is selected, the timestamp (date and time)
@@ -530,7 +530,7 @@
 
 
 /* Where do the internal registers live? */
-#define CFG_IMMR		0xF0000000
+#define CONFIG_SYS_IMMR		0xF0000000
 
 #undef	CONFIG_WATCHDOG			/* disable the watchdog */
 
@@ -548,76 +548,76 @@
 /*
  * Miscellaneous configurable options
  */
-#define CFG_BOOTM_HEADER_QUIET 1        /* Suppress the image header dump    */
+#define CONFIG_SYS_BOOTM_HEADER_QUIET 1        /* Suppress the image header dump    */
 					/* in the bootm command.             */
-#define CFG_BOOTM_PROGESS_QUIET 1       /* Suppress the progress displays,   */
+#define CONFIG_SYS_BOOTM_PROGESS_QUIET 1       /* Suppress the progress displays,   */
 					/* "## <message>" from the bootm cmd */
-#define CFG_BOOTP_CHECK_HOSTNAME 1      /* If checkhostname environment is   */
+#define CONFIG_SYS_BOOTP_CHECK_HOSTNAME 1      /* If checkhostname environment is   */
 					/* defined, then the hostname param  */
 					/* validated against checkhostname.  */
-#define CFG_BOOTP_RETRY_COUNT 0x40000000 /* # of timeouts before giving up   */
-#define CFG_BOOTP_SHORT_RANDOM_DELAY 1  /* Use a short random delay value    */
+#define CONFIG_SYS_BOOTP_RETRY_COUNT 0x40000000 /* # of timeouts before giving up   */
+#define CONFIG_SYS_BOOTP_SHORT_RANDOM_DELAY 1  /* Use a short random delay value    */
 					/* (limited to maximum of 1024 msec) */
-#define CFG_CHK_FOR_ABORT_AT_LEAST_ONCE 1
+#define CONFIG_SYS_CHK_FOR_ABORT_AT_LEAST_ONCE 1
 					/* Check for abort key presses       */
 					/* at least once in dependent of the */
 					/* CONFIG_BOOTDELAY value.           */
-#define CFG_CONSOLE_INFO_QUIET 1        /* Don't print console @ startup     */
-#define CFG_FAULT_ECHO_LINK_DOWN 1      /* Echo the inverted Ethernet link   */
+#define CONFIG_SYS_CONSOLE_INFO_QUIET 1        /* Don't print console @ startup     */
+#define CONFIG_SYS_FAULT_ECHO_LINK_DOWN 1      /* Echo the inverted Ethernet link   */
 					/* state to the fault LED.           */
-#define CFG_FAULT_MII_ADDR 0x02         /* MII addr of the PHY to check for  */
+#define CONFIG_SYS_FAULT_MII_ADDR 0x02         /* MII addr of the PHY to check for  */
 					/* the Ethernet link state.          */
-#define CFG_STATUS_FLASH_UNTIL_TFTP_OK 1 /* Keeping the status LED flashing  */
+#define CONFIG_SYS_STATUS_FLASH_UNTIL_TFTP_OK 1 /* Keeping the status LED flashing  */
 					/* until the TFTP is successful.     */
-#define CFG_STATUS_OFF_AFTER_NETBOOT 1  /* After a successful netboot,       */
+#define CONFIG_SYS_STATUS_OFF_AFTER_NETBOOT 1  /* After a successful netboot,       */
 					/* turn off the STATUS LEDs.         */
-#define CFG_TFTP_BLINK_STATUS_ON_DATA_IN 1 /* Blink status LED based on      */
+#define CONFIG_SYS_TFTP_BLINK_STATUS_ON_DATA_IN 1 /* Blink status LED based on      */
 					/* incoming data.                    */
-#define CFG_TFTP_BLOCKS_PER_HASH 100    /* For every XX blocks, output a '#' */
+#define CONFIG_SYS_TFTP_BLOCKS_PER_HASH 100    /* For every XX blocks, output a '#' */
 					/* to signify that tftp is moving.   */
-#define CFG_TFTP_HASHES_PER_FLASH 200   /* For every '#' hashes,             */
+#define CONFIG_SYS_TFTP_HASHES_PER_FLASH 200   /* For every '#' hashes,             */
 					/* flash the status LED.             */
-#define CFG_TFTP_HASHES_PER_LINE 65     /* Only output XX '#'s per line      */
+#define CONFIG_SYS_TFTP_HASHES_PER_LINE 65     /* Only output XX '#'s per line      */
 					/* during the tftp file transfer.    */
-#define CFG_TFTP_PROGESS_QUIET 1        /* Suppress the progress displays    */
+#define CONFIG_SYS_TFTP_PROGESS_QUIET 1        /* Suppress the progress displays    */
 					/* '#'s from the tftp command.       */
-#define CFG_TFTP_STATUS_QUIET 1         /* Suppress the status displays      */
+#define CONFIG_SYS_TFTP_STATUS_QUIET 1         /* Suppress the status displays      */
 					/* issued during the tftp command.   */
-#define CFG_TFTP_TIMEOUT_COUNT 5        /* How many timeouts TFTP will allow */
+#define CONFIG_SYS_TFTP_TIMEOUT_COUNT 5        /* How many timeouts TFTP will allow */
 					/* before it gives up.               */
 
 #if defined(CONFIG_CMD_KGDB)
-#  define CFG_CBSIZE		1024	/* Console I/O Buffer Size	     */
+#  define CONFIG_SYS_CBSIZE		1024	/* Console I/O Buffer Size	     */
 #else
-#  define CFG_CBSIZE		256	/* Console I/O Buffer Size	     */
+#  define CONFIG_SYS_CBSIZE		256	/* Console I/O Buffer Size	     */
 #endif
 
 /* Print Buffer Size */
-#define CFG_PBSIZE	  (CFG_CBSIZE + sizeof(CFG_PROMPT)+16)
+#define CONFIG_SYS_PBSIZE	  (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT)+16)
 
-#define CFG_MAXARGS		32	/* max number of command args	*/
+#define CONFIG_SYS_MAXARGS		32	/* max number of command args	*/
 
-#define CFG_BARGSIZE		CFG_CBSIZE /* Boot Argument Buffer Size	   */
+#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size	   */
 
-#define CFG_LOAD_ADDR		0x400000   /* default load address */
-#define CFG_HZ			1000	/* decrementer freq: 1 ms ticks */
+#define CONFIG_SYS_LOAD_ADDR		0x400000   /* default load address */
+#define CONFIG_SYS_HZ			1000	/* decrementer freq: 1 ms ticks */
 
-#define CFG_ALT_MEMTEST                 /* Select full-featured memory test */
-#define CFG_MEMTEST_START	0x2000	/* memtest works from the end of */
+#define CONFIG_SYS_ALT_MEMTEST                 /* Select full-featured memory test */
+#define CONFIG_SYS_MEMTEST_START	0x2000	/* memtest works from the end of */
 					/* the exception vector table */
 					/* to the end of the DRAM  */
 					/* less monitor and malloc area */
-#define CFG_STACK_USAGE		0x10000 /* Reserve 64k for the stack usage */
-#define CFG_MEM_END_USAGE	( CFG_MONITOR_LEN \
-				+ CFG_MALLOC_LEN \
-				+ CFG_ENV_SECT_SIZE \
-				+ CFG_STACK_USAGE )
+#define CONFIG_SYS_STACK_USAGE		0x10000 /* Reserve 64k for the stack usage */
+#define CONFIG_SYS_MEM_END_USAGE	( CONFIG_SYS_MONITOR_LEN \
+				+ CONFIG_SYS_MALLOC_LEN \
+				+ CONFIG_ENV_SECT_SIZE \
+				+ CONFIG_SYS_STACK_USAGE )
 
-#define CFG_MEMTEST_END		( CFG_SDRAM_SIZE * 1024 * 1024 \
-				- CFG_MEM_END_USAGE )
+#define CONFIG_SYS_MEMTEST_END		( CONFIG_SYS_SDRAM_SIZE * 1024 * 1024 \
+				- CONFIG_SYS_MEM_END_USAGE )
 
 /* valid baudrates */
-#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
 
 /*
  * Low Level Configuration Settings
@@ -625,112 +625,112 @@
  * You should know what you are doing if you make changes here.
  */
 
-#define CFG_FLASH_BASE	CFG_FLASH0_BASE
-#define CFG_FLASH_SIZE	CFG_FLASH0_SIZE
-#define CFG_SDRAM_BASE	CFG_SDRAM0_BASE
-#define CFG_SDRAM_SIZE	CFG_SDRAM0_SIZE
+#define CONFIG_SYS_FLASH_BASE	CONFIG_SYS_FLASH0_BASE
+#define CONFIG_SYS_FLASH_SIZE	CONFIG_SYS_FLASH0_SIZE
+#define CONFIG_SYS_SDRAM_BASE	CONFIG_SYS_SDRAM0_BASE
+#define CONFIG_SYS_SDRAM_SIZE	CONFIG_SYS_SDRAM0_SIZE
 
 /*-----------------------------------------------------------------------
  * Hard Reset Configuration Words
  */
-#if defined(CFG_SBC_BOOT_LOW)
-#  define  CFG_SBC_HRCW_BOOT_FLAGS  (HRCW_CIP | HRCW_BMS)
+#if defined(CONFIG_SYS_SBC_BOOT_LOW)
+#  define  CONFIG_SYS_SBC_HRCW_BOOT_FLAGS  (HRCW_CIP | HRCW_BMS)
 #else
-#  define  CFG_SBC_HRCW_BOOT_FLAGS  (0)
-#endif /* defined(CFG_SBC_BOOT_LOW) */
+#  define  CONFIG_SYS_SBC_HRCW_BOOT_FLAGS  (0)
+#endif /* defined(CONFIG_SYS_SBC_BOOT_LOW) */
 
-/* get the HRCW ISB field from CFG_IMMR */
-#define CFG_SBC_HRCW_IMMR	( ((CFG_IMMR & 0x10000000) >> 10) | \
-				  ((CFG_IMMR & 0x01000000) >>  7) | \
-				  ((CFG_IMMR & 0x00100000) >>  4) )
+/* get the HRCW ISB field from CONFIG_SYS_IMMR */
+#define CONFIG_SYS_SBC_HRCW_IMMR	( ((CONFIG_SYS_IMMR & 0x10000000) >> 10) | \
+				  ((CONFIG_SYS_IMMR & 0x01000000) >>  7) | \
+				  ((CONFIG_SYS_IMMR & 0x00100000) >>  4) )
 
-#define CFG_HRCW_MASTER		( HRCW_BPS10				| \
+#define CONFIG_SYS_HRCW_MASTER		( HRCW_BPS10				| \
 				  HRCW_DPPC11				| \
-				  CFG_SBC_HRCW_IMMR			| \
+				  CONFIG_SYS_SBC_HRCW_IMMR			| \
 				  HRCW_MMR00				| \
 				  HRCW_LBPC11				| \
 				  HRCW_APPC10				| \
 				  HRCW_CS10PC00				| \
-				  (CFG_SBC_MODCK_H & HRCW_MODCK_H1111)	| \
-				  CFG_SBC_HRCW_BOOT_FLAGS )
+				  (CONFIG_SYS_SBC_MODCK_H & HRCW_MODCK_H1111)	| \
+				  CONFIG_SYS_SBC_HRCW_BOOT_FLAGS )
 
 /* no slaves */
-#define CFG_HRCW_SLAVE1		0
-#define CFG_HRCW_SLAVE2		0
-#define CFG_HRCW_SLAVE3		0
-#define CFG_HRCW_SLAVE4		0
-#define CFG_HRCW_SLAVE5		0
-#define CFG_HRCW_SLAVE6		0
-#define CFG_HRCW_SLAVE7		0
+#define CONFIG_SYS_HRCW_SLAVE1		0
+#define CONFIG_SYS_HRCW_SLAVE2		0
+#define CONFIG_SYS_HRCW_SLAVE3		0
+#define CONFIG_SYS_HRCW_SLAVE4		0
+#define CONFIG_SYS_HRCW_SLAVE5		0
+#define CONFIG_SYS_HRCW_SLAVE6		0
+#define CONFIG_SYS_HRCW_SLAVE7		0
 
 /*-----------------------------------------------------------------------
  * Definitions for initial stack pointer and data area (in DPRAM)
  */
-#define CFG_INIT_RAM_ADDR	CFG_IMMR
-#define CFG_INIT_RAM_END	0x4000	/* End of used area in DPRAM	*/
-#define CFG_GBL_DATA_SIZE	128	/* bytes reserved for initial data */
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_IMMR
+#define CONFIG_SYS_INIT_RAM_END	0x4000	/* End of used area in DPRAM	*/
+#define CONFIG_SYS_GBL_DATA_SIZE	128	/* bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
 /*-----------------------------------------------------------------------
  * Start addresses for the final memory configuration
  * (Set up by the startup code)
- * Please note that CFG_SDRAM_BASE _must_ start at 0
- * Note also that the logic that sets CFG_RAMBOOT is platform dependent.
+ * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
+ * Note also that the logic that sets CONFIG_SYS_RAMBOOT is platform dependent.
  */
-#define CFG_MONITOR_BASE	CFG_FLASH0_BASE
+#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_FLASH0_BASE
 
-#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
-#  define CFG_RAMBOOT
+#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
+#  define CONFIG_SYS_RAMBOOT
 #endif
 
-#define CFG_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor	*/
-#define CFG_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/
+#define CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor	*/
+#define CONFIG_SYS_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/
 
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
+#define CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
 
 /*-----------------------------------------------------------------------
  * FLASH and environment organization
  */
 
-#define CFG_FLASH_CFI		1	/* Flash is CFI conformant		*/
-#undef  CFG_FLASH_PROTECTION		/* use hardware protection		*/
-#define CFG_MAX_FLASH_BANKS	2	/* max number of memory banks		*/
-#define CFG_MAX_FLASH_SECT	(64+4)	/* max number of sectors on one chip	*/
+#define CONFIG_SYS_FLASH_CFI		1	/* Flash is CFI conformant		*/
+#undef  CONFIG_SYS_FLASH_PROTECTION		/* use hardware protection		*/
+#define CONFIG_SYS_MAX_FLASH_BANKS	2	/* max number of memory banks		*/
+#define CONFIG_SYS_MAX_FLASH_SECT	(64+4)	/* max number of sectors on one chip	*/
 
-#define CFG_FLASH_ERASE_TOUT	8000	/* Timeout for Flash Erase (in ms)	*/
-#define CFG_FLASH_WRITE_TOUT	1	/* Timeout for Flash Write (in ms)	*/
+#define CONFIG_SYS_FLASH_ERASE_TOUT	8000	/* Timeout for Flash Erase (in ms)	*/
+#define CONFIG_SYS_FLASH_WRITE_TOUT	1	/* Timeout for Flash Write (in ms)	*/
 
-#ifndef CFG_RAMBOOT
-#  define CFG_ENV_IS_IN_FLASH	1
+#ifndef CONFIG_SYS_RAMBOOT
+#  define CONFIG_ENV_IS_IN_FLASH	1
 
-#  ifdef CFG_ENV_IN_OWN_SECT
-#    define CFG_ENV_ADDR	(CFG_MONITOR_BASE + CFG_MONITOR_LEN)
-#    define CFG_ENV_SECT_SIZE	0x10000
+#  ifdef CONFIG_ENV_IN_OWN_SECT
+#    define CONFIG_ENV_ADDR	(CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)
+#    define CONFIG_ENV_SECT_SIZE	0x10000
 #  else
-#    define CFG_ENV_ADDR (CFG_FLASH_BASE + CFG_MONITOR_LEN - CFG_ENV_SECT_SIZE)
-#    define CFG_ENV_SIZE	0x1000	/* Total Size of Environment Sector	*/
-#    define CFG_ENV_SECT_SIZE	0x10000 /* see README - env sect real size	*/
-#  endif /* CFG_ENV_IN_OWN_SECT */
+#    define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + CONFIG_SYS_MONITOR_LEN - CONFIG_ENV_SECT_SIZE)
+#    define CONFIG_ENV_SIZE	0x1000	/* Total Size of Environment Sector	*/
+#    define CONFIG_ENV_SECT_SIZE	0x10000 /* see README - env sect real size	*/
+#  endif /* CONFIG_ENV_IN_OWN_SECT */
 
 #else
-#  define CFG_ENV_IS_IN_NVRAM	1
-#  define CFG_ENV_ADDR		(CFG_MONITOR_BASE - 0x1000)
-#  define CFG_ENV_SIZE		0x200
-#endif /* CFG_RAMBOOT */
+#  define CONFIG_ENV_IS_IN_NVRAM	1
+#  define CONFIG_ENV_ADDR		(CONFIG_SYS_MONITOR_BASE - 0x1000)
+#  define CONFIG_ENV_SIZE		0x200
+#endif /* CONFIG_SYS_RAMBOOT */
 
 /*-----------------------------------------------------------------------
  * Cache Configuration
  */
-#define CFG_CACHELINE_SIZE	32	/* For MPC8260 CPU */
+#define CONFIG_SYS_CACHELINE_SIZE	32	/* For MPC8260 CPU */
 
 #if defined(CONFIG_CMD_KGDB)
-# define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value */
+# define CONFIG_SYS_CACHELINE_SHIFT	5	/* log base 2 of the above value */
 #endif
 
 /*-----------------------------------------------------------------------
@@ -743,37 +743,37 @@
  *
  * HID1 has only read-only information - nothing to set.
  */
-#define CFG_HID0_INIT	(HID0_ICE  |\
+#define CONFIG_SYS_HID0_INIT	(HID0_ICE  |\
 			 HID0_DCE  |\
 			 HID0_ICFI |\
 			 HID0_DCI  |\
 			 HID0_IFEM |\
 			 HID0_ABE)
 
-#define CFG_HID0_FINAL	(HID0_ICE  |\
+#define CONFIG_SYS_HID0_FINAL	(HID0_ICE  |\
 			 HID0_IFEM |\
 			 HID0_ABE  |\
 			 HID0_EMCP)
-#define CFG_HID2	0
+#define CONFIG_SYS_HID2	0
 
 /*-----------------------------------------------------------------------
  * RMR - Reset Mode Register
  *-----------------------------------------------------------------------
  */
-#define CFG_RMR		0
+#define CONFIG_SYS_RMR		0
 
 /*-----------------------------------------------------------------------
  * BCR - Bus Configuration					 4-25
  *-----------------------------------------------------------------------
  */
-#define CFG_BCR		(BCR_ETM)
+#define CONFIG_SYS_BCR		(BCR_ETM)
 
 /*-----------------------------------------------------------------------
  * SIUMCR - SIU Module Configuration				 4-31
  *-----------------------------------------------------------------------
  */
 
-#define CFG_SIUMCR	(SIUMCR_DPPC11	|\
+#define CONFIG_SYS_SIUMCR	(SIUMCR_DPPC11	|\
 			 SIUMCR_L2CPC00 |\
 			 SIUMCR_APPC10	|\
 			 SIUMCR_MMR00)
@@ -786,7 +786,7 @@
  * Watchdog & Bus Monitor Timer max, 60x Bus Monitor enable
  */
 #if defined(CONFIG_WATCHDOG)
-#define CFG_SYPCR	(SYPCR_SWTC |\
+#define CONFIG_SYS_SYPCR	(SYPCR_SWTC |\
 			 SYPCR_BMT  |\
 			 SYPCR_PBME |\
 			 SYPCR_LBME |\
@@ -794,7 +794,7 @@
 			 SYPCR_SWP  |\
 			 SYPCR_SWE)
 #else
-#define CFG_SYPCR	(SYPCR_SWTC |\
+#define CONFIG_SYS_SYPCR	(SYPCR_SWTC |\
 			 SYPCR_BMT  |\
 			 SYPCR_PBME |\
 			 SYPCR_LBME |\
@@ -808,7 +808,7 @@
  * Clear once per Second and Alarm Interrupt Status, Set 32KHz timersclk,
  * and enable Time Counter
  */
-#define CFG_TMCNTSC	(TMCNTSC_SEC |\
+#define CONFIG_SYS_TMCNTSC	(TMCNTSC_SEC |\
 			 TMCNTSC_ALR |\
 			 TMCNTSC_TCF |\
 			 TMCNTSC_TCE)
@@ -819,7 +819,7 @@
  * Clear Periodic Interrupt Status, Set 32KHz timersclk, and enable
  * Periodic timer
  */
-#define CFG_PISCR	(PISCR_PS  |\
+#define CONFIG_SYS_PISCR	(PISCR_PS  |\
 			 PISCR_PTF |\
 			 PISCR_PTE)
 
@@ -827,13 +827,13 @@
  * SCCR - System Clock Control					 9-8
  *-----------------------------------------------------------------------
  */
-#define CFG_SCCR	0
+#define CONFIG_SYS_SCCR	0
 
 /*-----------------------------------------------------------------------
  * RCCR - RISC Controller Configuration				13-7
  *-----------------------------------------------------------------------
  */
-#define CFG_RCCR	0
+#define CONFIG_SYS_RCCR	0
 
 /*
  * Initialize Memory Controller:
@@ -872,7 +872,7 @@
  *     - No data pipelining is done
  *     - Valid
  */
-#define CFG_BR0_PRELIM	((CFG_FLASH0_BASE & BRx_BA_MSK) |\
+#define CONFIG_SYS_BR0_PRELIM	((CONFIG_SYS_FLASH0_BASE & BRx_BA_MSK) |\
 			 BRx_PS_16			|\
 			 BRx_MS_GPCM_P			|\
 			 BRx_V)
@@ -891,7 +891,7 @@
  *     - One idle clock is inserted between a read access from the
  *	 current bank and the next access.
  */
-#define CFG_OR0_PRELIM	(MEG_TO_AM(CFG_FLASH0_SIZE)	|\
+#define CONFIG_SYS_OR0_PRELIM	(MEG_TO_AM(CONFIG_SYS_FLASH0_SIZE)	|\
 			 ORxG_CSNT			|\
 			 ORxG_ACS_DIV1			|\
 			 ORxG_SCY_5_CLK			|\
@@ -921,12 +921,12 @@
  *     - No data pipelining is done
  *     - Valid
  */
-#define CFG_BR2_PRELIM	((CFG_SDRAM0_BASE & BRx_BA_MSK) |\
+#define CONFIG_SYS_BR2_PRELIM	((CONFIG_SYS_SDRAM0_BASE & BRx_BA_MSK) |\
 			 BRx_PS_64			|\
 			 BRx_MS_SDRAM_P			|\
 			 BRx_V)
 
-#define CFG_BR3_PRELIM	((CFG_SDRAM0_BASE & BRx_BA_MSK) |\
+#define CONFIG_SYS_BR3_PRELIM	((CONFIG_SYS_SDRAM0_BASE & BRx_BA_MSK) |\
 			 BRx_PS_64			|\
 			 BRx_MS_SDRAM_P			|\
 			 BRx_V)
@@ -940,8 +940,8 @@
  *     - Back-to-back page mode
  *     - Internal bank interleaving within save device enabled
  */
-#if (CFG_SDRAM0_SIZE == 64)
-#define CFG_OR2_PRELIM	(MEG_TO_AM(CFG_SDRAM0_SIZE)	|\
+#if (CONFIG_SYS_SDRAM0_SIZE == 64)
+#define CONFIG_SYS_OR2_PRELIM	(MEG_TO_AM(CONFIG_SYS_SDRAM0_SIZE)	|\
 			 ORxS_BPD_4			|\
 			 ORxS_ROWST_PBI0_A8		|\
 			 ORxS_NUMR_12)
@@ -959,7 +959,7 @@
  */
 #define SDRAM_SPD_ADDR 0x50
 
-#if (CFG_SDRAM0_SIZE == 64)
+#if (CONFIG_SYS_SDRAM0_SIZE == 64)
 /* With a 64 MB DIMM, the PSDMR is configured as follows:
  *
  *     - Bank Based Interleaving,
@@ -977,7 +977,7 @@
  *     - earliest timing for PRECHARGE after last data was written is 1 clock,
  *     - CAS Latency is 2.
  */
-#define CFG_PSDMR	(PSDMR_RFEN	      |\
+#define CONFIG_SYS_PSDMR	(PSDMR_RFEN	      |\
 			 PSDMR_SDAM_A14_IS_A5 |\
 			 PSDMR_BSMA_A14_A16   |\
 			 PSDMR_SDA10_PBI0_A9  |\
@@ -995,14 +995,14 @@
  * Shoot for approximately 1MHz on the prescaler.
  */
 #if (CONFIG_8260_CLKIN >= (60 * 1000 * 1000))
-#define CFG_MPTPR	MPTPR_PTP_DIV64
+#define CONFIG_SYS_MPTPR	MPTPR_PTP_DIV64
 #elif (CONFIG_8260_CLKIN >= (30 * 1000 * 1000))
-#define CFG_MPTPR	MPTPR_PTP_DIV32
+#define CONFIG_SYS_MPTPR	MPTPR_PTP_DIV32
 #else
-#warning "Unconfigured bus clock freq: check CFG_MPTPR and CFG_PSRT are OK"
-#define CFG_MPTPR	MPTPR_PTP_DIV32
+#warning "Unconfigured bus clock freq: check CONFIG_SYS_MPTPR and CONFIG_SYS_PSRT are OK"
+#define CONFIG_SYS_MPTPR	MPTPR_PTP_DIV32
 #endif
-#define CFG_PSRT	14
+#define CONFIG_SYS_PSRT	14
 
 
 /*-----------------------------------------------------------------------
@@ -1017,7 +1017,7 @@
  *
  * The secondary FLASH is connected to *CS6
  */
-#if (defined(CFG_FLASH1_BASE) && defined(CFG_FLASH1_SIZE))
+#if (defined(CONFIG_SYS_FLASH1_BASE) && defined(CONFIG_SYS_FLASH1_SIZE))
 
 /* BR6 is configured as follows:
  *
@@ -1031,7 +1031,7 @@
  *     - No data pipelining is done
  *     - Valid
  */
-#  define CFG_BR6_PRELIM  ((CFG_FLASH1_BASE & BRx_BA_MSK) |\
+#  define CONFIG_SYS_BR6_PRELIM  ((CONFIG_SYS_FLASH1_BASE & BRx_BA_MSK) |\
 			   BRx_PS_16			  |\
 			   BRx_MS_GPCM_P		  |\
 			   BRx_V)
@@ -1050,13 +1050,13 @@
  *     - One idle clock is inserted between a read access from the
  *	 current bank and the next access.
  */
-#  define CFG_OR6_PRELIM  (MEG_TO_AM(CFG_FLASH1_SIZE)  |\
+#  define CONFIG_SYS_OR6_PRELIM  (MEG_TO_AM(CONFIG_SYS_FLASH1_SIZE)  |\
 			   ORxG_CSNT		       |\
 			   ORxG_ACS_DIV1	       |\
 			   ORxG_SCY_5_CLK	       |\
 			   ORxG_TRLX		       |\
 			   ORxG_EHTR)
-#endif /* (defined(CFG_FLASH1_BASE) && defined(CFG_FLASH1_SIZE)) */
+#endif /* (defined(CONFIG_SYS_FLASH1_BASE) && defined(CONFIG_SYS_FLASH1_SIZE)) */
 
 /*
  * Internal Definitions
diff --git a/include/configs/sbc2410x.h b/include/configs/sbc2410x.h
index 08cadf627..d7a6ae46c 100644
--- a/include/configs/sbc2410x.h
+++ b/include/configs/sbc2410x.h
@@ -57,8 +57,8 @@
 /*
  * Size of malloc() pool
  */
-#define CFG_MALLOC_LEN		(CFG_ENV_SIZE + 128*1024)
-#define CFG_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
+#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + 128*1024)
+#define CONFIG_SYS_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
 
 /*
  * Hardware drivers
@@ -125,26 +125,26 @@
 /*
  * Miscellaneous configurable options
  */
-#define	CFG_LONGHELP				/* undef to save memory		*/
-#define	CFG_PROMPT		"[ ~ljh@GDLC ]# "	/* Monitor Command Prompt	*/
-#define	CFG_CBSIZE		256		/* Console I/O Buffer Size	*/
-#define	CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define	CFG_MAXARGS		16		/* max number of command args	*/
-#define CFG_BARGSIZE		CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+#define	CONFIG_SYS_LONGHELP				/* undef to save memory		*/
+#define	CONFIG_SYS_PROMPT		"[ ~ljh@GDLC ]# "	/* Monitor Command Prompt	*/
+#define	CONFIG_SYS_CBSIZE		256		/* Console I/O Buffer Size	*/
+#define	CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define	CONFIG_SYS_MAXARGS		16		/* max number of command args	*/
+#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
 
-#define CFG_MEMTEST_START	0x30000000	/* memtest works on	*/
-#define CFG_MEMTEST_END		0x33F00000	/* 63 MB in DRAM	*/
+#define CONFIG_SYS_MEMTEST_START	0x30000000	/* memtest works on	*/
+#define CONFIG_SYS_MEMTEST_END		0x33F00000	/* 63 MB in DRAM	*/
 
-#undef  CFG_CLKS_IN_HZ		/* everything, incl board info, in Hz */
+#undef  CONFIG_SYS_CLKS_IN_HZ		/* everything, incl board info, in Hz */
 
-#define	CFG_LOAD_ADDR		0x33000000	/* default load address	*/
+#define	CONFIG_SYS_LOAD_ADDR		0x33000000	/* default load address	*/
 
 /* the PWM TImer 4 uses a counter of 15625 for 10 ms, so we need */
 /* it to wrap 100 times (total 1562500) to get 1 sec. */
-#define	CFG_HZ			1562500
+#define	CONFIG_SYS_HZ			1562500
 
 /* valid baudrates */
-#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
 
 /*-----------------------------------------------------------------------
  * Stack sizes
@@ -166,7 +166,7 @@
 
 #define PHYS_FLASH_1		0x00000000 /* Flash Bank #1 */
 
-#define CFG_FLASH_BASE		PHYS_FLASH_1
+#define CONFIG_SYS_FLASH_BASE		PHYS_FLASH_1
 
 /*-----------------------------------------------------------------------
  * FLASH and environment organization
@@ -175,32 +175,32 @@
 
 #define CONFIG_AMD_LV800	1	/* uncomment this if you have a LV800 flash */
 
-#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks */
+#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks */
 
 #ifdef CONFIG_AMD_LV800
 #define PHYS_FLASH_SIZE		0x00100000 /* 1MB */
-#define CFG_MAX_FLASH_SECT	(19)	/* max number of sectors on one chip */
-#define CFG_ENV_ADDR		(CFG_FLASH_BASE + 0x0F0000) /* addr of environment */
+#define CONFIG_SYS_MAX_FLASH_SECT	(19)	/* max number of sectors on one chip */
+#define CONFIG_ENV_ADDR		(CONFIG_SYS_FLASH_BASE + 0x0F0000) /* addr of environment */
 #endif
 
 #ifdef CONFIG_AMD_LV400
 #define PHYS_FLASH_SIZE		0x00080000 /* 512KB */
-#define CFG_MAX_FLASH_SECT	(11)	/* max number of sectors on one chip */
-#define CFG_ENV_ADDR		(CFG_FLASH_BASE + 0x070000) /* addr of environment */
+#define CONFIG_SYS_MAX_FLASH_SECT	(11)	/* max number of sectors on one chip */
+#define CONFIG_ENV_ADDR		(CONFIG_SYS_FLASH_BASE + 0x070000) /* addr of environment */
 #endif
 
 /* timeout values are in ticks */
-#define CFG_FLASH_ERASE_TOUT	(5*CFG_HZ) /* Timeout for Flash Erase */
-#define CFG_FLASH_WRITE_TOUT	(5*CFG_HZ) /* Timeout for Flash Write */
+#define CONFIG_SYS_FLASH_ERASE_TOUT	(5*CONFIG_SYS_HZ) /* Timeout for Flash Erase */
+#define CONFIG_SYS_FLASH_WRITE_TOUT	(5*CONFIG_SYS_HZ) /* Timeout for Flash Write */
 
-#define	CFG_ENV_IS_IN_FLASH	1
-#define CFG_ENV_SIZE		0x10000	/* Total Size of Environment Sector */
+#define	CONFIG_ENV_IS_IN_FLASH	1
+#define CONFIG_ENV_SIZE		0x10000	/* Total Size of Environment Sector */
 
 /*-----------------------------------------------------------------------
  * NAND flash settings
  */
 #if defined(CONFIG_CMD_NAND)
-#define CFG_MAX_NAND_DEVICE	1	/* Max number of NAND devices		*/
+#define CONFIG_SYS_MAX_NAND_DEVICE	1	/* Max number of NAND devices		*/
 #define SECTORSIZE 512
 
 #define ADDR_COLUMN 1
@@ -231,8 +231,8 @@
 #define CONFIG_INITRD_TAG
 #define CONFIG_CMDLINE_TAG
 
-#define CFG_HUSH_PARSER
-#define CFG_PROMPT_HUSH_PS2   "> "
+#define CONFIG_SYS_HUSH_PARSER
+#define CONFIG_SYS_PROMPT_HUSH_PS2   "> "
 
 #define CONFIG_CMDLINE_EDITING
 
diff --git a/include/configs/sbc405.h b/include/configs/sbc405.h
index 60d401fa0..c156820ac 100644
--- a/include/configs/sbc405.h
+++ b/include/configs/sbc405.h
@@ -58,6 +58,7 @@
 #define CONFIG_BOOTCOMMAND      "version;echo;tftpboot ${loadaddr} ${loadfile};bootvx"      /* autoboot command     */
 
 
+#define CONFIG_PPC4xx_EMAC
 #define CONFIG_MII		1	/* MII PHY management		*/
 #define CONFIG_PHY_ADDR		0	/* PHY address			*/
 #define CONFIG_PHY_RESET_DELAY	300	/* Intel LXT971A needs this	*/
@@ -125,48 +126,48 @@
 /*
  * Miscellaneous configurable options
  */
-#define CFG_LONGHELP			/* undef to save memory		*/
-#define CFG_PROMPT	"=> "		/* Monitor Command Prompt	*/
+#define CONFIG_SYS_LONGHELP			/* undef to save memory		*/
+#define CONFIG_SYS_PROMPT	"=> "		/* Monitor Command Prompt	*/
 
-#undef CFG_HUSH_PARSER			/* use "hush" command parser	*/
-#ifdef CFG_HUSH_PARSER
-#define CFG_PROMPT_HUSH_PS2	"> "
+#undef CONFIG_SYS_HUSH_PARSER			/* use "hush" command parser	*/
+#ifdef CONFIG_SYS_HUSH_PARSER
+#define CONFIG_SYS_PROMPT_HUSH_PS2	"> "
 #endif
 
 #if defined(CONFIG_CMD_KGDB)
-#define CFG_CBSIZE	1024		/* Console I/O Buffer Size	*/
+#define CONFIG_SYS_CBSIZE	1024		/* Console I/O Buffer Size	*/
 #else
-#define CFG_CBSIZE	256		/* Console I/O Buffer Size	*/
+#define CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size	*/
 #endif
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define CFG_MAXARGS	16		/* max number of command args	*/
-#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS	16		/* max number of command args	*/
+#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
 
-#define CFG_MEMTEST_START	0x0400000	/* memtest works on	*/
-#define CFG_MEMTEST_END		0x0C00000	/* 4 ... 12 MB in DRAM	*/
+#define CONFIG_SYS_MEMTEST_START	0x0400000	/* memtest works on	*/
+#define CONFIG_SYS_MEMTEST_END		0x0C00000	/* 4 ... 12 MB in DRAM	*/
 
-#undef CFG_EXT_SERIAL_CLOCK		/* no external serial clock used */
-#define CFG_IGNORE_405_UART_ERRATA_59	/* ignore ppc405gp errata #59	*/
-#define CFG_BASE_BAUD		691200
+#undef CONFIG_SYS_EXT_SERIAL_CLOCK		/* no external serial clock used */
+#define CONFIG_SYS_IGNORE_405_UART_ERRATA_59	/* ignore ppc405gp errata #59	*/
+#define CONFIG_SYS_BASE_BAUD		691200
 
 /* The following table includes the supported baudrates */
-#define CFG_BAUDRATE_TABLE					\
+#define CONFIG_SYS_BAUDRATE_TABLE					\
 	{ 300, 600, 1200, 2400, 4800, 9600, 19200, 38400,	\
 	 57600, 115200, 230400, 460800, 921600 }
 
-#define CFG_LOAD_ADDR	0x100000	/* default load address */
-#define CFG_EXTBDINFO	1		/* To use extended board_info (bd_t) */
+#define CONFIG_SYS_LOAD_ADDR	0x100000	/* default load address */
+#define CONFIG_SYS_EXTBDINFO	1		/* To use extended board_info (bd_t) */
 
-#define CFG_HZ		1000		/* decrementer freq: 1 ms ticks */
+#define CONFIG_SYS_HZ		1000		/* decrementer freq: 1 ms ticks */
 
 #define CONFIG_VERSION_VARIABLE	1	/* include version env variable */
 
-#define CFG_RX_ETH_BUFFER	16	/* use 16 rx buffer on 405 emac */
+#define CONFIG_SYS_RX_ETH_BUFFER	16	/* use 16 rx buffer on 405 emac */
 
 #define CONFIG_HARD_I2C		1	/* I2C with hardware support	*/
 #undef  CONFIG_SOFT_I2C			/* I2C bit-banged		*/
-#define CFG_I2C_SPEED		400000	/* I2C speed and slave address	*/
-#define CFG_I2C_SLAVE		0x7F
+#define CONFIG_SYS_I2C_SPEED		400000	/* I2C speed and slave address	*/
+#define CONFIG_SYS_I2C_SLAVE		0x7F
 
 /*-----------------------------------------------------------------------
  * PCI stuff
@@ -183,81 +184,81 @@
 
 #define CONFIG_PCI_SCAN_SHOW		/* print pci devices @ startup	*/
 
-#define CFG_PCI_SUBSYS_VENDORID	0x12FE	/* PCI Vendor ID: esd gmbh	*/
-#define CFG_PCI_SUBSYS_DEVICEID	0x0408	/* PCI Device ID: PMC-405	*/
-#define CFG_PCI_CLASSCODE	0x0b20	/* PCI Class Code: Processor/PPC*/
-#define CFG_PCI_PTM1LA	0x00000000	/* point to sdram		*/
-#define CFG_PCI_PTM1MS	0xfc000001	/* 64MB, enable hard-wired to 1 */
-#define CFG_PCI_PTM1PCI	0x00000000	/* Host: use this pci address	*/
-#define CFG_PCI_PTM2LA	0xffc00000	/* point to flash		*/
-#define CFG_PCI_PTM2MS	0xffc00001	/* 4MB, enable			*/
-#define CFG_PCI_PTM2PCI	0x04000000	/* Host: use this pci address	*/
+#define CONFIG_SYS_PCI_SUBSYS_VENDORID	0x12FE	/* PCI Vendor ID: esd gmbh	*/
+#define CONFIG_SYS_PCI_SUBSYS_DEVICEID	0x0408	/* PCI Device ID: PMC-405	*/
+#define CONFIG_SYS_PCI_CLASSCODE	0x0b20	/* PCI Class Code: Processor/PPC*/
+#define CONFIG_SYS_PCI_PTM1LA	0x00000000	/* point to sdram		*/
+#define CONFIG_SYS_PCI_PTM1MS	0xfc000001	/* 64MB, enable hard-wired to 1 */
+#define CONFIG_SYS_PCI_PTM1PCI	0x00000000	/* Host: use this pci address	*/
+#define CONFIG_SYS_PCI_PTM2LA	0xffc00000	/* point to flash		*/
+#define CONFIG_SYS_PCI_PTM2MS	0xffc00001	/* 4MB, enable			*/
+#define CONFIG_SYS_PCI_PTM2PCI	0x04000000	/* Host: use this pci address	*/
 
 /*-----------------------------------------------------------------------
  * Start addresses for the final memory configuration
  * (Set up by the startup code)
- * Please note that CFG_SDRAM_BASE _must_ start at 0
+ * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
  */
-#define CFG_SDRAM_BASE		0x00000000
-#define CFG_MONITOR_BASE	0xFFFC0000
-#define CFG_MONITOR_LEN	(256 * 1024)	/* Reserve 256 kB for Monitor	*/
-#define CFG_MALLOC_LEN	(128 * 1024)	/* Reserve 128 kB for malloc()	*/
+#define CONFIG_SYS_SDRAM_BASE		0x00000000
+#define CONFIG_SYS_MONITOR_BASE	0xFFFC0000
+#define CONFIG_SYS_MONITOR_LEN	(256 * 1024)	/* Reserve 256 kB for Monitor	*/
+#define CONFIG_SYS_MALLOC_LEN	(128 * 1024)	/* Reserve 128 kB for malloc()	*/
 
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define CFG_BOOTMAPSZ	(8 << 20)	/* Initial Memory map for Linux */
+#define CONFIG_SYS_BOOTMAPSZ	(8 << 20)	/* Initial Memory map for Linux */
 
 /*-----------------------------------------------------------------------
  * FLASH organization
  */
-#define CFG_FLASH_BASE		0xFF000000
-#define CFG_FLASH_CFI		1	/* Flash is CFI conformant		*/
-#define CFG_FLASH_EMPTY_INFO		/* print 'E' for empty sector on flinfo */
-#define CFG_FLASH_ERASE_TOUT	120000	/* Flash Erase Timeout (in ms)		*/
-#define CFG_FLASH_INCREMENT	0x01000000
-#undef CFG_FLASH_PROTECTION		/* don't use hardware protection	*/
-#define CFG_FLASH_USE_BUFFER_WRITE 1	/* use buffered writes (20x faster)	*/
-#define CFG_FLASH_WRITE_TOUT	500	/* Flash Write Timeout (in ms)		*/
-#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
-#define CFG_MAX_FLASH_SECT	128	/* max number of sectors on one chip	*/
+#define CONFIG_SYS_FLASH_BASE		0xFF000000
+#define CONFIG_SYS_FLASH_CFI		1	/* Flash is CFI conformant		*/
+#define CONFIG_SYS_FLASH_EMPTY_INFO		/* print 'E' for empty sector on flinfo */
+#define CONFIG_SYS_FLASH_ERASE_TOUT	120000	/* Flash Erase Timeout (in ms)		*/
+#define CONFIG_SYS_FLASH_INCREMENT	0x01000000
+#undef CONFIG_SYS_FLASH_PROTECTION		/* don't use hardware protection	*/
+#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1	/* use buffered writes (20x faster)	*/
+#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Flash Write Timeout (in ms)		*/
+#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
+#define CONFIG_SYS_MAX_FLASH_SECT	128	/* max number of sectors on one chip	*/
 
 /*-----------------------------------------------------------------------
  * Environment Variable setup
  */
-#define CFG_ENV_ADDR	CFG_FLASH_BASE	/* starting right at the beginning	*/
-#define CFG_ENV_IS_IN_FLASH	1
-#define CFG_ENV_OFFSET		0	/* starting right at the beginning	*/
-#define CFG_ENV_SECT_SIZE	0x40000	/* see README - env sector total size	*/
-#define CFG_ENV_SIZE		0x40000	/* Total Size of Environment Sector	*/
+#define CONFIG_ENV_ADDR	CONFIG_SYS_FLASH_BASE	/* starting right at the beginning	*/
+#define CONFIG_ENV_IS_IN_FLASH	1
+#define CONFIG_ENV_OFFSET		0	/* starting right at the beginning	*/
+#define CONFIG_ENV_SECT_SIZE	0x40000	/* see README - env sector total size	*/
+#define CONFIG_ENV_SIZE		0x40000	/* Total Size of Environment Sector	*/
 
 /*-----------------------------------------------------------------------
  * External Bus Controller (EBC) Setup
  */
-#define FLASH0_BA	CFG_FLASH_BASE		/* FLASH 0 Base Address		*/
+#define FLASH0_BA	CONFIG_SYS_FLASH_BASE		/* FLASH 0 Base Address		*/
 
 /* Memory Bank 0 (Flash Bank 0) initialization					*/
-#define CFG_EBC_PB0AP	0x92015480
-#define CFG_EBC_PB0CR	FLASH0_BA | 0x9C000 /* BAS=0xFF0,BS=16MB,BU=R/W,BW=32bit*/
+#define CONFIG_SYS_EBC_PB0AP	0x92015480
+#define CONFIG_SYS_EBC_PB0CR	FLASH0_BA | 0x9C000 /* BAS=0xFF0,BS=16MB,BU=R/W,BW=32bit*/
 
 /*-----------------------------------------------------------------------
  * Definitions for initial stack pointer and data area (in data cache)
  */
 
 /* use on chip memory ( OCM ) for temperary stack until sdram is tested */
-#define CFG_TEMP_STACK_OCM	1
+#define CONFIG_SYS_TEMP_STACK_OCM	1
 
 /* On Chip Memory location */
-#define CFG_OCM_DATA_ADDR	0xF8000000
-#define CFG_OCM_DATA_SIZE	0x1000
-
-#define CFG_INIT_RAM_ADDR	CFG_OCM_DATA_ADDR /* inside of SDRAM		*/
-#define CFG_INIT_RAM_END	CFG_OCM_DATA_SIZE /* End of used area in RAM	*/
-#define CFG_GBL_DATA_SIZE	128  /* size in bytes reserved for initial data */
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_OCM_DATA_ADDR	0xF8000000
+#define CONFIG_SYS_OCM_DATA_SIZE	0x1000
+
+#define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_OCM_DATA_ADDR /* inside of SDRAM		*/
+#define CONFIG_SYS_INIT_RAM_END	CONFIG_SYS_OCM_DATA_SIZE /* End of used area in RAM	*/
+#define CONFIG_SYS_GBL_DATA_SIZE	128  /* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
 /*-----------------------------------------------------------------------
  * Definitions for Serial Presence Detect EEPROM address
diff --git a/include/configs/sbc8240.h b/include/configs/sbc8240.h
index 0e878f054..d19a787e9 100644
--- a/include/configs/sbc8240.h
+++ b/include/configs/sbc8240.h
@@ -45,7 +45,7 @@
 
 #define CONFIG_CONS_INDEX	1
 #define CONFIG_BAUDRATE		9600
-#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
 
 #define CONFIG_PREBOOT  "echo;echo Welcome to U-Boot for the sbc8240;echo;echo Type \"? or help\" to get on-line help;echo"
 
@@ -106,15 +106,15 @@
 /*
  * Miscellaneous configurable options
  */
-#define CFG_LONGHELP			/* undef to save memory		*/
-#define CFG_PROMPT	"=> "		/* Monitor Command Prompt	*/
-#define CFG_CBSIZE	256		/* Console I/O Buffer Size	*/
+#define CONFIG_SYS_LONGHELP			/* undef to save memory		*/
+#define CONFIG_SYS_PROMPT	"=> "		/* Monitor Command Prompt	*/
+#define CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size	*/
 
 #if 1
-#define CFG_HUSH_PARSER		1	/* use "hush" command parser	*/
+#define CONFIG_SYS_HUSH_PARSER		1	/* use "hush" command parser	*/
 #endif
-#ifdef CFG_HUSH_PARSER
-#define CFG_PROMPT_HUSH_PS2	"> "
+#ifdef CONFIG_SYS_HUSH_PARSER
+#define CONFIG_SYS_PROMPT_HUSH_PS2	"> "
 #endif
 
 #define CONFIG_ETHADDR          DE:AD:BE:EF:01:01    /* Ethernet address */
@@ -126,7 +126,7 @@
 #define CONFIG_BOARD_SPECIFIC_LED       /* version has board specific leds */
 
 #define STATUS_LED_BIT          0x00000001
-#define STATUS_LED_PERIOD       (CFG_HZ / 2)
+#define STATUS_LED_PERIOD       (CONFIG_SYS_HZ / 2)
 #define STATUS_LED_STATE        STATUS_LED_BLINKING
 #define STATUS_LED_ACTIVE       0       /* LED on for bit == 0  */
 #define STATUS_LED_BOOT         0       /* LED 0 used for boot status */
@@ -137,15 +137,15 @@ typedef unsigned int led_id_t;
 
 #define __led_toggle(_msk) \
 	do { \
-		*((volatile char *) (CFG_LED_BASE)) ^= (_msk); \
+		*((volatile char *) (CONFIG_SYS_LED_BASE)) ^= (_msk); \
 	} while(0)
 
 #define __led_set(_msk, _st) \
 	do { \
 		if ((_st)) \
-			*((volatile char *) (CFG_LED_BASE)) |= (_msk); \
+			*((volatile char *) (CONFIG_SYS_LED_BASE)) |= (_msk); \
 		else \
-			*((volatile char *) (CFG_LED_BASE)) &= ~(_msk); \
+			*((volatile char *) (CONFIG_SYS_LED_BASE)) &= ~(_msk); \
 	} while(0)
 
 #define __led_init(msk, st) __led_set(msk, st)
@@ -153,44 +153,44 @@ typedef unsigned int led_id_t;
 #endif
 
 #define CONFIG_MISC_INIT_R
-#define CFG_LED_BASE	0xFFE80000
+#define CONFIG_SYS_LED_BASE	0xFFE80000
 
 /* Print Buffer Size
  */
-#define CFG_PBSIZE	(CFG_CBSIZE + sizeof(CFG_PROMPT) + 16)
+#define CONFIG_SYS_PBSIZE	(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
 
-#define CFG_MAXARGS	16		/* max number of command args	*/
-#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size	*/
-#define CFG_LOAD_ADDR	0x00100000	/* Default load address		*/
+#define CONFIG_SYS_MAXARGS	16		/* max number of command args	*/
+#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
+#define CONFIG_SYS_LOAD_ADDR	0x00100000	/* Default load address		*/
 
 /*-----------------------------------------------------------------------
  * Start addresses for the final memory configuration
  * (Set up by the startup code)
- * Please note that CFG_SDRAM_BASE _must_ start at 0
+ * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
  */
-#define CFG_SDRAM_BASE	    0x00000000
-#define CFG_FLASH_BASE	    0xFFF00000
+#define CONFIG_SYS_SDRAM_BASE	    0x00000000
+#define CONFIG_SYS_FLASH_BASE	    0xFFF00000
 
-#define CFG_RESET_ADDRESS   0xFFF00100
+#define CONFIG_SYS_RESET_ADDRESS   0xFFF00100
 
-#define CFG_EUMB_ADDR	    0xFCE00000
+#define CONFIG_SYS_EUMB_ADDR	    0xFCE00000
 
-#define CFG_MONITOR_BASE    TEXT_BASE
+#define CONFIG_SYS_MONITOR_BASE    TEXT_BASE
 
-#define CFG_MONITOR_LEN	    (256 << 10) /* Reserve 256 kB for Monitor	*/
-#define CFG_MALLOC_LEN	    (128 << 10) /* Reserve 128 kB for malloc()	*/
+#define CONFIG_SYS_MONITOR_LEN	    (256 << 10) /* Reserve 256 kB for Monitor	*/
+#define CONFIG_SYS_MALLOC_LEN	    (128 << 10) /* Reserve 128 kB for malloc()	*/
 
-#define CFG_MEMTEST_START   0x00004000	/* memtest works on		*/
-#define CFG_MEMTEST_END	    0x02000000	/* 0 ... 32 MB in DRAM		*/
+#define CONFIG_SYS_MEMTEST_START   0x00004000	/* memtest works on		*/
+#define CONFIG_SYS_MEMTEST_END	    0x02000000	/* 0 ... 32 MB in DRAM		*/
 
 	/* Maximum amount of RAM.
 	 */
-#define CFG_MAX_RAM_SIZE    0x10000000
+#define CONFIG_SYS_MAX_RAM_SIZE    0x10000000
 
-#if CFG_MONITOR_BASE >= CFG_FLASH_BASE
-#undef CFG_RAMBOOT
+#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE
+#undef CONFIG_SYS_RAMBOOT
 #else
-#define CFG_RAMBOOT
+#define CONFIG_SYS_RAMBOOT
 #endif
 
 /*-----------------------------------------------------------------------
@@ -199,23 +199,23 @@ typedef unsigned int led_id_t;
 
 	/* Size in bytes reserved for initial data
 	 */
-#define CFG_GBL_DATA_SIZE    128
+#define CONFIG_SYS_GBL_DATA_SIZE    128
 
-#define CFG_INIT_RAM_ADDR     0x40000000
-#define CFG_INIT_RAM_END      0x1000
-#define CFG_GBL_DATA_OFFSET  (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_RAM_ADDR     0x40000000
+#define CONFIG_SYS_INIT_RAM_END      0x1000
+#define CONFIG_SYS_GBL_DATA_OFFSET  (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
 
 /*
  * NS16550 Configuration
  */
-#define CFG_NS16550
-#define CFG_NS16550_SERIAL
+#define CONFIG_SYS_NS16550
+#define CONFIG_SYS_NS16550_SERIAL
 
-#define CFG_NS16550_REG_SIZE	1
+#define CONFIG_SYS_NS16550_REG_SIZE	1
 
-#define CFG_NS16550_CLK		3686400
+#define CONFIG_SYS_NS16550_CLK		3686400
 
-#define CFG_NS16550_COM1	0xFFF80000
+#define CONFIG_SYS_NS16550_COM1	0xFFF80000
 
 /*
  * Low Level Configuration Settings
@@ -225,36 +225,36 @@ typedef unsigned int led_id_t;
  */
 
 #define CONFIG_SYS_CLK_FREQ  33000000
-#define CFG_HZ		     1000
+#define CONFIG_SYS_HZ		     1000
 #define CONFIG_PLL_PCI_TO_MEM_MULTIPLIER 3
 
 	/* Bit-field values for MCCR1.
 	 */
-#define CFG_ROMNAL	    0
-#define CFG_ROMFAL	    7
+#define CONFIG_SYS_ROMNAL	    0
+#define CONFIG_SYS_ROMFAL	    7
 
 	/* Bit-field values for MCCR2.
 	 */
-#define CFG_REFINT	    430	    /* Refresh interval			*/
+#define CONFIG_SYS_REFINT	    430	    /* Refresh interval			*/
 
 	/* Burst To Precharge. Bits of this value go to MCCR3 and MCCR4.
 	 */
-#define CFG_BSTOPRE	    192
+#define CONFIG_SYS_BSTOPRE	    192
 
 	/* Bit-field values for MCCR3.
 	 */
-#define CFG_REFREC	    2	    /* Refresh to activate interval	*/
-#define CFG_RDLAT	    3	    /* Data latancy from read command	*/
+#define CONFIG_SYS_REFREC	    2	    /* Refresh to activate interval	*/
+#define CONFIG_SYS_RDLAT	    3	    /* Data latancy from read command	*/
 
 	/* Bit-field values for MCCR4.
 	 */
-#define CFG_PRETOACT	    2	    /* Precharge to activate interval	*/
-#define CFG_ACTTOPRE	    5	    /* Activate to Precharge interval	*/
-#define CFG_SDMODE_CAS_LAT  2	    /* SDMODE CAS latancy		*/
-#define CFG_SDMODE_WRAP	    0	    /* SDMODE wrap type			*/
-#define CFG_SDMODE_BURSTLEN 2	    /* SDMODE Burst length		*/
-#define CFG_ACTORW	    2
-#define CFG_REGISTERD_TYPE_BUFFER 1
+#define CONFIG_SYS_PRETOACT	    2	    /* Precharge to activate interval	*/
+#define CONFIG_SYS_ACTTOPRE	    5	    /* Activate to Precharge interval	*/
+#define CONFIG_SYS_SDMODE_CAS_LAT  2	    /* SDMODE CAS latancy		*/
+#define CONFIG_SYS_SDMODE_WRAP	    0	    /* SDMODE wrap type			*/
+#define CONFIG_SYS_SDMODE_BURSTLEN 2	    /* SDMODE Burst length		*/
+#define CONFIG_SYS_ACTORW	    2
+#define CONFIG_SYS_REGISTERD_TYPE_BUFFER 1
 
 /* Memory bank settings.
  * Only bits 20-29 are actually used from these vales to set the
@@ -263,69 +263,69 @@ typedef unsigned int led_id_t;
  * address. Refer to the MPC8240 book.
  */
 
-#define CFG_BANK0_START	    0x00000000
-#define CFG_BANK0_END	    (CFG_MAX_RAM_SIZE - 1)
-#define CFG_BANK0_ENABLE    1
-#define CFG_BANK1_START	    0x3ff00000
-#define CFG_BANK1_END	    0x3fffffff
-#define CFG_BANK1_ENABLE    0
-#define CFG_BANK2_START	    0x3ff00000
-#define CFG_BANK2_END	    0x3fffffff
-#define CFG_BANK2_ENABLE    0
-#define CFG_BANK3_START	    0x3ff00000
-#define CFG_BANK3_END	    0x3fffffff
-#define CFG_BANK3_ENABLE    0
-#define CFG_BANK4_START	    0x3ff00000
-#define CFG_BANK4_END	    0x3fffffff
-#define CFG_BANK4_ENABLE    0
-#define CFG_BANK5_START	    0x3ff00000
-#define CFG_BANK5_END	    0x3fffffff
-#define CFG_BANK5_ENABLE    0
-#define CFG_BANK6_START	    0x3ff00000
-#define CFG_BANK6_END	    0x3fffffff
-#define CFG_BANK6_ENABLE    0
-#define CFG_BANK7_START	    0x3ff00000
-#define CFG_BANK7_END	    0x3fffffff
-#define CFG_BANK7_ENABLE    0
-
-#define CFG_ODCR	    0xff
-
-#define CFG_IBAT0L  (CFG_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
-#define CFG_IBAT0U  (CFG_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
-
-#define CFG_IBAT1L  (CFG_INIT_RAM_ADDR | BATL_PP_10 | BATL_MEMCOHERENCE)
-#define CFG_IBAT1U  (CFG_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP)
-
-#define CFG_IBAT2L  (0x80000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
-#define CFG_IBAT2U  (0x80000000 | BATU_BL_256M | BATU_VS | BATU_VP)
-
-#define CFG_IBAT3L  (0xFC000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
-#define CFG_IBAT3U  (0xFC000000 | BATU_BL_64M | BATU_VS | BATU_VP)
-
-#define CFG_DBAT0L  CFG_IBAT0L
-#define CFG_DBAT0U  CFG_IBAT0U
-#define CFG_DBAT1L  CFG_IBAT1L
-#define CFG_DBAT1U  CFG_IBAT1U
-#define CFG_DBAT2L  CFG_IBAT2L
-#define CFG_DBAT2U  CFG_IBAT2U
-#define CFG_DBAT3L  CFG_IBAT3L
-#define CFG_DBAT3U  CFG_IBAT3U
+#define CONFIG_SYS_BANK0_START	    0x00000000
+#define CONFIG_SYS_BANK0_END	    (CONFIG_SYS_MAX_RAM_SIZE - 1)
+#define CONFIG_SYS_BANK0_ENABLE    1
+#define CONFIG_SYS_BANK1_START	    0x3ff00000
+#define CONFIG_SYS_BANK1_END	    0x3fffffff
+#define CONFIG_SYS_BANK1_ENABLE    0
+#define CONFIG_SYS_BANK2_START	    0x3ff00000
+#define CONFIG_SYS_BANK2_END	    0x3fffffff
+#define CONFIG_SYS_BANK2_ENABLE    0
+#define CONFIG_SYS_BANK3_START	    0x3ff00000
+#define CONFIG_SYS_BANK3_END	    0x3fffffff
+#define CONFIG_SYS_BANK3_ENABLE    0
+#define CONFIG_SYS_BANK4_START	    0x3ff00000
+#define CONFIG_SYS_BANK4_END	    0x3fffffff
+#define CONFIG_SYS_BANK4_ENABLE    0
+#define CONFIG_SYS_BANK5_START	    0x3ff00000
+#define CONFIG_SYS_BANK5_END	    0x3fffffff
+#define CONFIG_SYS_BANK5_ENABLE    0
+#define CONFIG_SYS_BANK6_START	    0x3ff00000
+#define CONFIG_SYS_BANK6_END	    0x3fffffff
+#define CONFIG_SYS_BANK6_ENABLE    0
+#define CONFIG_SYS_BANK7_START	    0x3ff00000
+#define CONFIG_SYS_BANK7_END	    0x3fffffff
+#define CONFIG_SYS_BANK7_ENABLE    0
+
+#define CONFIG_SYS_ODCR	    0xff
+
+#define CONFIG_SYS_IBAT0L  (CONFIG_SYS_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
+#define CONFIG_SYS_IBAT0U  (CONFIG_SYS_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
+
+#define CONFIG_SYS_IBAT1L  (CONFIG_SYS_INIT_RAM_ADDR | BATL_PP_10 | BATL_MEMCOHERENCE)
+#define CONFIG_SYS_IBAT1U  (CONFIG_SYS_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP)
+
+#define CONFIG_SYS_IBAT2L  (0x80000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
+#define CONFIG_SYS_IBAT2U  (0x80000000 | BATU_BL_256M | BATU_VS | BATU_VP)
+
+#define CONFIG_SYS_IBAT3L  (0xFC000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
+#define CONFIG_SYS_IBAT3U  (0xFC000000 | BATU_BL_64M | BATU_VS | BATU_VP)
+
+#define CONFIG_SYS_DBAT0L  CONFIG_SYS_IBAT0L
+#define CONFIG_SYS_DBAT0U  CONFIG_SYS_IBAT0U
+#define CONFIG_SYS_DBAT1L  CONFIG_SYS_IBAT1L
+#define CONFIG_SYS_DBAT1U  CONFIG_SYS_IBAT1U
+#define CONFIG_SYS_DBAT2L  CONFIG_SYS_IBAT2L
+#define CONFIG_SYS_DBAT2U  CONFIG_SYS_IBAT2U
+#define CONFIG_SYS_DBAT3L  CONFIG_SYS_IBAT3L
+#define CONFIG_SYS_DBAT3U  CONFIG_SYS_IBAT3U
 
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define CFG_BOOTMAPSZ	    (8 << 20)	/* Initial Memory map for Linux */
+#define CONFIG_SYS_BOOTMAPSZ	    (8 << 20)	/* Initial Memory map for Linux */
 
 /*-----------------------------------------------------------------------
  * FLASH organization
  */
-#define CFG_MAX_FLASH_BANKS	1	/* Max number of flash banks		*/
-#define CFG_MAX_FLASH_SECT	256	/* Max number of sectors in one bank	*/
+#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* Max number of flash banks		*/
+#define CONFIG_SYS_MAX_FLASH_SECT	256	/* Max number of sectors in one bank	*/
 
-#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
-#define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
+#define CONFIG_SYS_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
+#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
 
 /*
  * Init Memory Controller:
@@ -333,24 +333,24 @@ typedef unsigned int led_id_t;
  * BR0/1 and OR0/1 (FLASH)
  */
 
-#define FLASH_BASE0_PRELIM      CFG_FLASH_BASE  /* FLASH bank #0        */
+#define FLASH_BASE0_PRELIM      CONFIG_SYS_FLASH_BASE  /* FLASH bank #0        */
 #define FLASH_BASE1_PRELIM      0               /* FLASH bank #1        */
 
 	/* Warining: environment is not EMBEDDED in the U-Boot code.
 	 * It's stored in flash separately.
 	 */
-#define CFG_ENV_IS_IN_FLASH	1
-#define CFG_ENV_ADDR		0xFFF70000
-#define CFG_ENV_SIZE		0x4000	/* Size of the Environment		*/
-#define CFG_ENV_OFFSET		0	/* starting right at the beginning	*/
-#define CFG_ENV_SECT_SIZE	0x40000 /* Size of the Environment Sector	*/
+#define CONFIG_ENV_IS_IN_FLASH	1
+#define CONFIG_ENV_ADDR		0xFFF70000
+#define CONFIG_ENV_SIZE		0x4000	/* Size of the Environment		*/
+#define CONFIG_ENV_OFFSET		0	/* starting right at the beginning	*/
+#define CONFIG_ENV_SECT_SIZE	0x40000 /* Size of the Environment Sector	*/
 
 /*-----------------------------------------------------------------------
  * Cache Configuration
  */
-#define CFG_CACHELINE_SIZE	32
+#define CONFIG_SYS_CACHELINE_SIZE	32
 #if defined(CONFIG_CMD_KGDB)
-#  define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value	*/
+#  define CONFIG_SYS_CACHELINE_SHIFT	5	/* log base 2 of the above value	*/
 #endif
 
 /*
@@ -370,5 +370,5 @@ typedef unsigned int led_id_t;
 #define CONFIG_NET_MULTI		/* Multi ethernet cards support */
 #define CONFIG_TULIP
 #define CONFIG_EEPRO100
-#define CFG_RX_ETH_BUFFER	8       /* use 8 rx buffer on eepro100  */
+#define CONFIG_SYS_RX_ETH_BUFFER	8       /* use 8 rx buffer on eepro100  */
 #endif /* __CONFIG_H */
diff --git a/include/configs/sbc8260.h b/include/configs/sbc8260.h
index b92344ccc..26ed55795 100644
--- a/include/configs/sbc8260.h
+++ b/include/configs/sbc8260.h
@@ -73,7 +73,7 @@
  * 0x6	     0x1	 66	133    266   Close  Close  Open
  * 0x6	     0x2	 66	133    300   Close  Open   Close
  */
-#define CFG_SBC_MODCK_H 0x05
+#define CONFIG_SYS_SBC_MODCK_H 0x05
 
 /* Define this if you want to boot from 0x00000100. If you don't define
  * this, you will need to program the bootloader to 0xfff00000, and
@@ -81,34 +81,34 @@
  * way to do that is to program the bootloader at both addresses.
  * It is suggested that you just let U-Boot live at 0x00000000.
  */
-#define CFG_SBC_BOOT_LOW 1
+#define CONFIG_SYS_SBC_BOOT_LOW 1
 
 /* What should the base address of the main FLASH be and how big is
  * it (in MBytes)? This must contain TEXT_BASE from board/sbc8260/config.mk
  * The main FLASH is whichever is connected to *CS0. U-Boot expects
  * this to be the SIMM.
  */
-#define CFG_FLASH0_BASE 0x40000000
-#define CFG_FLASH0_SIZE 4
+#define CONFIG_SYS_FLASH0_BASE 0x40000000
+#define CONFIG_SYS_FLASH0_SIZE 4
 
 /* What should the base address of the secondary FLASH be and how big
  * is it (in Mbytes)? The secondary FLASH is whichever is connected
  * to *CS6. U-Boot expects this to be the on board FLASH. If you don't
  * want it enabled, don't define these constants.
  */
-#define CFG_FLASH1_BASE 0x60000000
-#define CFG_FLASH1_SIZE 2
+#define CONFIG_SYS_FLASH1_BASE 0x60000000
+#define CONFIG_SYS_FLASH1_SIZE 2
 
 /* What should be the base address of SDRAM DIMM and how big is
  * it (in Mbytes)?
 */
-#define CFG_SDRAM0_BASE 0x00000000
-#define CFG_SDRAM0_SIZE 64
+#define CONFIG_SYS_SDRAM0_BASE 0x00000000
+#define CONFIG_SYS_SDRAM0_SIZE 64
 
 /* What should be the base address of the LEDs and switch S0?
  * If you don't want them enabled, don't define this.
  */
-#define CFG_LED_BASE 0xa0000000
+#define CONFIG_SYS_LED_BASE 0xa0000000
 
 
 /*
@@ -127,11 +127,11 @@
  *		       Monitor Stack Buffer (0x80)
  *     0x00F5 FFB0     Board Info Data
  *     0x00F6 0000     Malloc Arena
- *	     :		    CFG_ENV_SECT_SIZE, 256k
- *	     :		    CFG_MALLOC_LEN,    128k
+ *	     :		    CONFIG_ENV_SECT_SIZE, 256k
+ *	     :		    CONFIG_SYS_MALLOC_LEN,    128k
  *     0x00FC 0000     RAM Copy of Monitor Code
- *	     :		    CFG_MONITOR_LEN,   256k
- *     0x00FF FFFF     [End of RAM], CFG_SDRAM_SIZE - 1
+ *	     :		    CONFIG_SYS_MONITOR_LEN,   256k
+ *     0x00FF FFFF     [End of RAM], CONFIG_SYS_SDRAM_SIZE - 1
  */
 
 /*
@@ -150,11 +150,11 @@
  *		       Monitor Stack Buffer (0x80)
  *     0x03F5 FFB0     Board Info Data
  *     0x03F6 0000     Malloc Arena
- *	     :		    CFG_ENV_SECT_SIZE, 256k
- *	     :		    CFG_MALLOC_LEN,    128k
+ *	     :		    CONFIG_ENV_SECT_SIZE, 256k
+ *	     :		    CONFIG_SYS_MALLOC_LEN,    128k
  *     0x03FC 0000     RAM Copy of Monitor Code
- *	     :		    CFG_MONITOR_LEN,   256k
- *     0x03FF FFFF     [End of RAM], CFG_SDRAM_SIZE - 1
+ *	     :		    CONFIG_SYS_MONITOR_LEN,   256k
+ *     0x03FF FFFF     [End of RAM], CONFIG_SYS_SDRAM_SIZE - 1
  */
 
 
@@ -220,7 +220,7 @@
  *  - RX clk is CLK11
  *  - TX clk is CLK12
  */
-# define CFG_CMXSCR_VALUE	(CMXSCR_RS1CS_CLK11  | CMXSCR_TS1CS_CLK12)
+# define CONFIG_SYS_CMXSCR_VALUE	(CMXSCR_RS1CS_CLK11  | CMXSCR_TS1CS_CLK12)
 
 #elif defined(CONFIG_ETHER_ON_FCC) && (CONFIG_ETHER_INDEX == 2)
 
@@ -230,10 +230,10 @@
  * - Select bus for bd/buffers (see 28-13)
  * - Enable Full Duplex in FSMR
  */
-# define CFG_CMXFCR_MASK	(CMXFCR_FC2|CMXFCR_RF2CS_MSK|CMXFCR_TF2CS_MSK)
-# define CFG_CMXFCR_VALUE	(CMXFCR_RF2CS_CLK13|CMXFCR_TF2CS_CLK14)
-# define CFG_CPMFCR_RAMTYPE	0
-# define CFG_FCC_PSMR		(FCC_PSMR_FDE | FCC_PSMR_LPB)
+# define CONFIG_SYS_CMXFCR_MASK	(CMXFCR_FC2|CMXFCR_RF2CS_MSK|CMXFCR_TF2CS_MSK)
+# define CONFIG_SYS_CMXFCR_VALUE	(CMXFCR_RF2CS_CLK13|CMXFCR_TF2CS_CLK14)
+# define CONFIG_SYS_CPMFCR_RAMTYPE	0
+# define CONFIG_SYS_FCC_PSMR		(FCC_PSMR_FDE | FCC_PSMR_LPB)
 
 #endif /* CONFIG_ETHER_ON_FCC, CONFIG_ETHER_INDEX */
 
@@ -251,8 +251,8 @@
  */
 #undef  CONFIG_HARD_I2C			/* I2C with hardware support	*/
 #define CONFIG_SOFT_I2C		1	/* I2C bit-banged		*/
-#define CFG_I2C_SPEED		400000	/* I2C speed and slave address	*/
-#define CFG_I2C_SLAVE		0x7F
+#define CONFIG_SYS_I2C_SPEED		400000	/* I2C speed and slave address	*/
+#define CONFIG_SYS_I2C_SLAVE		0x7F
 
 /*
  * Software (bit-bang) I2C driver configuration
@@ -275,7 +275,7 @@
  * put in the same sector as U-Boot, and changing variables
  * will erase U-Boot temporarily
  */
-#define CFG_ENV_IN_OWN_SECT	1
+#define CONFIG_ENV_IN_OWN_SECT	1
 
 /* Define to allow the user to overwrite serial and ethaddr */
 #define CONFIG_ENV_OVERWRITE
@@ -425,14 +425,14 @@
 
 
 /* undef this to save memory */
-#define CFG_LONGHELP
+#define CONFIG_SYS_LONGHELP
 
 /* Monitor Command Prompt */
-#define CFG_PROMPT		"=> "
+#define CONFIG_SYS_PROMPT		"=> "
 
-#undef  CFG_HUSH_PARSER
-#ifdef  CFG_HUSH_PARSER
-#define CFG_PROMPT_HUSH_PS2	"> "
+#undef  CONFIG_SYS_HUSH_PARSER
+#ifdef  CONFIG_SYS_HUSH_PARSER
+#define CONFIG_SYS_PROMPT_HUSH_PS2	"> "
 #endif
 
 /* When CONFIG_TIMESTAMP is selected, the timestamp (date and time)
@@ -469,7 +469,7 @@
 #undef CONFIG_WATCHDOG				/* disable the watchdog */
 
 /* Where do the internal registers live? */
-#define CFG_IMMR		0xF0000000
+#define CONFIG_SYS_IMMR		0xF0000000
 
 /*****************************************************************************
  *
@@ -486,37 +486,37 @@
  * Miscellaneous configurable options
  */
 #if defined(CONFIG_CMD_KGDB)
-#  define CFG_CBSIZE		1024	/* Console I/O Buffer Size	     */
+#  define CONFIG_SYS_CBSIZE		1024	/* Console I/O Buffer Size	     */
 #else
-#  define CFG_CBSIZE		256	/* Console I/O Buffer Size	     */
+#  define CONFIG_SYS_CBSIZE		256	/* Console I/O Buffer Size	     */
 #endif
 
 /* Print Buffer Size */
-#define CFG_PBSIZE	  (CFG_CBSIZE + sizeof(CFG_PROMPT)+16)
+#define CONFIG_SYS_PBSIZE	  (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT)+16)
 
-#define CFG_MAXARGS		32	/* max number of command args	*/
+#define CONFIG_SYS_MAXARGS		32	/* max number of command args	*/
 
-#define CFG_BARGSIZE		CFG_CBSIZE /* Boot Argument Buffer Size	   */
+#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size	   */
 
-#define CFG_LOAD_ADDR		0x400000   /* default load address */
-#define CFG_HZ			1000	/* decrementer freq: 1 ms ticks */
+#define CONFIG_SYS_LOAD_ADDR		0x400000   /* default load address */
+#define CONFIG_SYS_HZ			1000	/* decrementer freq: 1 ms ticks */
 
-#define CFG_ALT_MEMTEST			/* Select full-featured memory test */
-#define CFG_MEMTEST_START	0x2000	/* memtest works from the end of */
+#define CONFIG_SYS_ALT_MEMTEST			/* Select full-featured memory test */
+#define CONFIG_SYS_MEMTEST_START	0x2000	/* memtest works from the end of */
 					/* the exception vector table */
 					/* to the end of the DRAM  */
 					/* less monitor and malloc area */
-#define CFG_STACK_USAGE		0x10000 /* Reserve 64k for the stack usage */
-#define CFG_MEM_END_USAGE	( CFG_MONITOR_LEN \
-				+ CFG_MALLOC_LEN \
-				+ CFG_ENV_SECT_SIZE \
-				+ CFG_STACK_USAGE )
+#define CONFIG_SYS_STACK_USAGE		0x10000 /* Reserve 64k for the stack usage */
+#define CONFIG_SYS_MEM_END_USAGE	( CONFIG_SYS_MONITOR_LEN \
+				+ CONFIG_SYS_MALLOC_LEN \
+				+ CONFIG_ENV_SECT_SIZE \
+				+ CONFIG_SYS_STACK_USAGE )
 
-#define CFG_MEMTEST_END		( CFG_SDRAM_SIZE * 1024 * 1024 \
-				- CFG_MEM_END_USAGE )
+#define CONFIG_SYS_MEMTEST_END		( CONFIG_SYS_SDRAM_SIZE * 1024 * 1024 \
+				- CONFIG_SYS_MEM_END_USAGE )
 
 /* valid baudrates */
-#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
 
 /*
  * Low Level Configuration Settings
@@ -524,109 +524,109 @@
  * You should know what you are doing if you make changes here.
  */
 
-#define CFG_FLASH_BASE	CFG_FLASH0_BASE
-#define CFG_FLASH_SIZE	CFG_FLASH0_SIZE
-#define CFG_SDRAM_BASE	CFG_SDRAM0_BASE
-#define CFG_SDRAM_SIZE	CFG_SDRAM0_SIZE
+#define CONFIG_SYS_FLASH_BASE	CONFIG_SYS_FLASH0_BASE
+#define CONFIG_SYS_FLASH_SIZE	CONFIG_SYS_FLASH0_SIZE
+#define CONFIG_SYS_SDRAM_BASE	CONFIG_SYS_SDRAM0_BASE
+#define CONFIG_SYS_SDRAM_SIZE	CONFIG_SYS_SDRAM0_SIZE
 
 /*-----------------------------------------------------------------------
  * Hard Reset Configuration Words
  */
-#if defined(CFG_SBC_BOOT_LOW)
-#  define  CFG_SBC_HRCW_BOOT_FLAGS  (HRCW_CIP | HRCW_BMS)
+#if defined(CONFIG_SYS_SBC_BOOT_LOW)
+#  define  CONFIG_SYS_SBC_HRCW_BOOT_FLAGS  (HRCW_CIP | HRCW_BMS)
 #else
-#  define  CFG_SBC_HRCW_BOOT_FLAGS  (0)
-#endif /* defined(CFG_SBC_BOOT_LOW) */
+#  define  CONFIG_SYS_SBC_HRCW_BOOT_FLAGS  (0)
+#endif /* defined(CONFIG_SYS_SBC_BOOT_LOW) */
 
-/* get the HRCW ISB field from CFG_IMMR */
-#define CFG_SBC_HRCW_IMMR	( ((CFG_IMMR & 0x10000000) >> 10) | \
-				  ((CFG_IMMR & 0x01000000) >>  7) | \
-				  ((CFG_IMMR & 0x00100000) >>  4) )
+/* get the HRCW ISB field from CONFIG_SYS_IMMR */
+#define CONFIG_SYS_SBC_HRCW_IMMR	( ((CONFIG_SYS_IMMR & 0x10000000) >> 10) | \
+				  ((CONFIG_SYS_IMMR & 0x01000000) >>  7) | \
+				  ((CONFIG_SYS_IMMR & 0x00100000) >>  4) )
 
-#define CFG_HRCW_MASTER		( HRCW_BPS11				| \
+#define CONFIG_SYS_HRCW_MASTER		( HRCW_BPS11				| \
 				  HRCW_DPPC11				| \
-				  CFG_SBC_HRCW_IMMR			| \
+				  CONFIG_SYS_SBC_HRCW_IMMR			| \
 				  HRCW_MMR00				| \
 				  HRCW_LBPC11				| \
 				  HRCW_APPC10				| \
 				  HRCW_CS10PC00				| \
-				  (CFG_SBC_MODCK_H & HRCW_MODCK_H1111)	| \
-				  CFG_SBC_HRCW_BOOT_FLAGS )
+				  (CONFIG_SYS_SBC_MODCK_H & HRCW_MODCK_H1111)	| \
+				  CONFIG_SYS_SBC_HRCW_BOOT_FLAGS )
 
 /* no slaves */
-#define CFG_HRCW_SLAVE1		0
-#define CFG_HRCW_SLAVE2		0
-#define CFG_HRCW_SLAVE3		0
-#define CFG_HRCW_SLAVE4		0
-#define CFG_HRCW_SLAVE5		0
-#define CFG_HRCW_SLAVE6		0
-#define CFG_HRCW_SLAVE7		0
+#define CONFIG_SYS_HRCW_SLAVE1		0
+#define CONFIG_SYS_HRCW_SLAVE2		0
+#define CONFIG_SYS_HRCW_SLAVE3		0
+#define CONFIG_SYS_HRCW_SLAVE4		0
+#define CONFIG_SYS_HRCW_SLAVE5		0
+#define CONFIG_SYS_HRCW_SLAVE6		0
+#define CONFIG_SYS_HRCW_SLAVE7		0
 
 /*-----------------------------------------------------------------------
  * Definitions for initial stack pointer and data area (in DPRAM)
  */
-#define CFG_INIT_RAM_ADDR	CFG_IMMR
-#define CFG_INIT_RAM_END	0x4000	/* End of used area in DPRAM	*/
-#define CFG_GBL_DATA_SIZE	128	/* bytes reserved for initial data */
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_IMMR
+#define CONFIG_SYS_INIT_RAM_END	0x4000	/* End of used area in DPRAM	*/
+#define CONFIG_SYS_GBL_DATA_SIZE	128	/* bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
 /*-----------------------------------------------------------------------
  * Start addresses for the final memory configuration
  * (Set up by the startup code)
- * Please note that CFG_SDRAM_BASE _must_ start at 0
- * Note also that the logic that sets CFG_RAMBOOT is platform dependent.
+ * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
+ * Note also that the logic that sets CONFIG_SYS_RAMBOOT is platform dependent.
  */
-#define CFG_MONITOR_BASE	CFG_FLASH0_BASE
+#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_FLASH0_BASE
 
-#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
-#  define CFG_RAMBOOT
+#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
+#  define CONFIG_SYS_RAMBOOT
 #endif
 
-#define CFG_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor	*/
-#define CFG_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/
+#define CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor	*/
+#define CONFIG_SYS_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/
 
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
+#define CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
 
 /*-----------------------------------------------------------------------
  * FLASH and environment organization
  */
-#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
-#define CFG_MAX_FLASH_SECT	16	/* max number of sectors on one chip	*/
+#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
+#define CONFIG_SYS_MAX_FLASH_SECT	16	/* max number of sectors on one chip	*/
 
-#define CFG_FLASH_ERASE_TOUT	8000	/* Timeout for Flash Erase (in ms)	*/
-#define CFG_FLASH_WRITE_TOUT	1	/* Timeout for Flash Write (in ms)	*/
+#define CONFIG_SYS_FLASH_ERASE_TOUT	8000	/* Timeout for Flash Erase (in ms)	*/
+#define CONFIG_SYS_FLASH_WRITE_TOUT	1	/* Timeout for Flash Write (in ms)	*/
 
-#ifndef CFG_RAMBOOT
-#  define CFG_ENV_IS_IN_FLASH	1
+#ifndef CONFIG_SYS_RAMBOOT
+#  define CONFIG_ENV_IS_IN_FLASH	1
 
-#  ifdef CFG_ENV_IN_OWN_SECT
-#    define CFG_ENV_ADDR	(CFG_MONITOR_BASE + 0x40000)
-#    define CFG_ENV_SECT_SIZE	0x40000
+#  ifdef CONFIG_ENV_IN_OWN_SECT
+#    define CONFIG_ENV_ADDR	(CONFIG_SYS_MONITOR_BASE + 0x40000)
+#    define CONFIG_ENV_SECT_SIZE	0x40000
 #  else
-#    define CFG_ENV_ADDR (CFG_FLASH_BASE + CFG_MONITOR_LEN - CFG_ENV_SECT_SIZE)
-#    define CFG_ENV_SIZE	0x1000	/* Total Size of Environment Sector	*/
-#    define CFG_ENV_SECT_SIZE	0x10000 /* see README - env sect real size	*/
-#  endif /* CFG_ENV_IN_OWN_SECT */
+#    define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + CONFIG_SYS_MONITOR_LEN - CONFIG_ENV_SECT_SIZE)
+#    define CONFIG_ENV_SIZE	0x1000	/* Total Size of Environment Sector	*/
+#    define CONFIG_ENV_SECT_SIZE	0x10000 /* see README - env sect real size	*/
+#  endif /* CONFIG_ENV_IN_OWN_SECT */
 
 #else
-#  define CFG_ENV_IS_IN_NVRAM	1
-#  define CFG_ENV_ADDR		(CFG_MONITOR_BASE - 0x1000)
-#  define CFG_ENV_SIZE		0x200
-#endif /* CFG_RAMBOOT */
+#  define CONFIG_ENV_IS_IN_NVRAM	1
+#  define CONFIG_ENV_ADDR		(CONFIG_SYS_MONITOR_BASE - 0x1000)
+#  define CONFIG_ENV_SIZE		0x200
+#endif /* CONFIG_SYS_RAMBOOT */
 
 /*-----------------------------------------------------------------------
  * Cache Configuration
  */
-#define CFG_CACHELINE_SIZE	32	/* For MPC8260 CPU */
+#define CONFIG_SYS_CACHELINE_SIZE	32	/* For MPC8260 CPU */
 
 #if defined(CONFIG_CMD_KGDB)
-# define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value */
+# define CONFIG_SYS_CACHELINE_SHIFT	5	/* log base 2 of the above value */
 #endif
 
 /*-----------------------------------------------------------------------
@@ -639,37 +639,37 @@
  *
  * HID1 has only read-only information - nothing to set.
  */
-#define CFG_HID0_INIT	(HID0_ICE  |\
+#define CONFIG_SYS_HID0_INIT	(HID0_ICE  |\
 			 HID0_DCE  |\
 			 HID0_ICFI |\
 			 HID0_DCI  |\
 			 HID0_IFEM |\
 			 HID0_ABE)
 
-#define CFG_HID0_FINAL	(HID0_ICE  |\
+#define CONFIG_SYS_HID0_FINAL	(HID0_ICE  |\
 			 HID0_IFEM |\
 			 HID0_ABE  |\
 			 HID0_EMCP)
-#define CFG_HID2	0
+#define CONFIG_SYS_HID2	0
 
 /*-----------------------------------------------------------------------
  * RMR - Reset Mode Register
  *-----------------------------------------------------------------------
  */
-#define CFG_RMR		0
+#define CONFIG_SYS_RMR		0
 
 /*-----------------------------------------------------------------------
  * BCR - Bus Configuration					 4-25
  *-----------------------------------------------------------------------
  */
-#define CFG_BCR		(BCR_ETM)
+#define CONFIG_SYS_BCR		(BCR_ETM)
 
 /*-----------------------------------------------------------------------
  * SIUMCR - SIU Module Configuration				 4-31
  *-----------------------------------------------------------------------
  */
 
-#define CFG_SIUMCR	(SIUMCR_DPPC11	|\
+#define CONFIG_SYS_SIUMCR	(SIUMCR_DPPC11	|\
 			 SIUMCR_L2CPC00 |\
 			 SIUMCR_APPC10	|\
 			 SIUMCR_MMR00)
@@ -682,7 +682,7 @@
  * Watchdog & Bus Monitor Timer max, 60x Bus Monitor enable
  */
 #if defined(CONFIG_WATCHDOG)
-#define CFG_SYPCR	(SYPCR_SWTC |\
+#define CONFIG_SYS_SYPCR	(SYPCR_SWTC |\
 			 SYPCR_BMT  |\
 			 SYPCR_PBME |\
 			 SYPCR_LBME |\
@@ -690,7 +690,7 @@
 			 SYPCR_SWP  |\
 			 SYPCR_SWE)
 #else
-#define CFG_SYPCR	(SYPCR_SWTC |\
+#define CONFIG_SYS_SYPCR	(SYPCR_SWTC |\
 			 SYPCR_BMT  |\
 			 SYPCR_PBME |\
 			 SYPCR_LBME |\
@@ -704,7 +704,7 @@
  * Clear once per Second and Alarm Interrupt Status, Set 32KHz timersclk,
  * and enable Time Counter
  */
-#define CFG_TMCNTSC	(TMCNTSC_SEC |\
+#define CONFIG_SYS_TMCNTSC	(TMCNTSC_SEC |\
 			 TMCNTSC_ALR |\
 			 TMCNTSC_TCF |\
 			 TMCNTSC_TCE)
@@ -715,7 +715,7 @@
  * Clear Periodic Interrupt Status, Set 32KHz timersclk, and enable
  * Periodic timer
  */
-#define CFG_PISCR	(PISCR_PS  |\
+#define CONFIG_SYS_PISCR	(PISCR_PS  |\
 			 PISCR_PTF |\
 			 PISCR_PTE)
 
@@ -723,13 +723,13 @@
  * SCCR - System Clock Control					 9-8
  *-----------------------------------------------------------------------
  */
-#define CFG_SCCR	0
+#define CONFIG_SYS_SCCR	0
 
 /*-----------------------------------------------------------------------
  * RCCR - RISC Controller Configuration				13-7
  *-----------------------------------------------------------------------
  */
-#define CFG_RCCR	0
+#define CONFIG_SYS_RCCR	0
 
 /*
  * Initialize Memory Controller:
@@ -780,7 +780,7 @@
  *     - No data pipelining is done
  *     - Valid
  */
-#define CFG_BR0_PRELIM	((CFG_FLASH0_BASE & BRx_BA_MSK) |\
+#define CONFIG_SYS_BR0_PRELIM	((CONFIG_SYS_FLASH0_BASE & BRx_BA_MSK) |\
 			 BRx_PS_32			|\
 			 BRx_MS_GPCM_P			|\
 			 BRx_V)
@@ -799,7 +799,7 @@
  *     - One idle clock is inserted between a read access from the
  *	 current bank and the next access.
  */
-#define CFG_OR0_PRELIM	(MEG_TO_AM(CFG_FLASH0_SIZE)	|\
+#define CONFIG_SYS_OR0_PRELIM	(MEG_TO_AM(CONFIG_SYS_FLASH0_SIZE)	|\
 			 ORxG_CSNT			|\
 			 ORxG_ACS_DIV1			|\
 			 ORxG_SCY_5_CLK			|\
@@ -834,12 +834,12 @@
  *     - No data pipelining is done
  *     - Valid
  */
-#define CFG_BR2_PRELIM	((CFG_SDRAM0_BASE & BRx_BA_MSK) |\
+#define CONFIG_SYS_BR2_PRELIM	((CONFIG_SYS_SDRAM0_BASE & BRx_BA_MSK) |\
 			 BRx_PS_64			|\
 			 BRx_MS_SDRAM_P			|\
 			 BRx_V)
 
-#define CFG_BR3_PRELIM	((CFG_SDRAM0_BASE & BRx_BA_MSK) |\
+#define CONFIG_SYS_BR3_PRELIM	((CONFIG_SYS_SDRAM0_BASE & BRx_BA_MSK) |\
 			 BRx_PS_64			|\
 			 BRx_MS_SDRAM_P			|\
 			 BRx_V)
@@ -853,8 +853,8 @@
  *     - Back-to-back page mode
  *     - Internal bank interleaving within save device enabled
  */
-#if (CFG_SDRAM0_SIZE == 16)
-#define CFG_OR2_PRELIM	(MEG_TO_AM(CFG_SDRAM0_SIZE)	|\
+#if (CONFIG_SYS_SDRAM0_SIZE == 16)
+#define CONFIG_SYS_OR2_PRELIM	(MEG_TO_AM(CONFIG_SYS_SDRAM0_SIZE)	|\
 			 ORxS_BPD_2			|\
 			 ORxS_ROWST_PBI0_A9		|\
 			 ORxS_NUMR_11)
@@ -869,8 +869,8 @@
  *     - Back-to-back page mode
  *     - Internal bank interleaving within save device enabled
  */
-#if (CFG_SDRAM0_SIZE == 64)
-#define CFG_OR2_PRELIM	(MEG_TO_AM(CFG_SDRAM0_SIZE)	|\
+#if (CONFIG_SYS_SDRAM0_SIZE == 64)
+#define CONFIG_SYS_OR2_PRELIM	(MEG_TO_AM(CONFIG_SYS_SDRAM0_SIZE)	|\
 			 ORxS_BPD_4			|\
 			 ORxS_ROWST_PBI0_A8		|\
 			 ORxS_NUMR_12)
@@ -886,7 +886,7 @@
  */
 #define SDRAM_SPD_ADDR 0x54
 
-#if (CFG_SDRAM0_SIZE == 16)
+#if (CONFIG_SYS_SDRAM0_SIZE == 16)
 /* With a 16 MB DIMM, the PSDMR is configured as follows:
  *
  *     - Bank Based Interleaving,
@@ -904,7 +904,7 @@
  *     - earliest timing for PRECHARGE after last data was written is 1 clock,
  *     - CAS Latency is 2.
  */
-#define CFG_PSDMR	(PSDMR_RFEN	      |\
+#define CONFIG_SYS_PSDMR	(PSDMR_RFEN	      |\
 			 PSDMR_SDAM_A14_IS_A5 |\
 			 PSDMR_BSMA_A16_A18   |\
 			 PSDMR_SDA10_PBI0_A9  |\
@@ -916,7 +916,7 @@
 			 PSDMR_CL_2)
 #endif
 
-#if (CFG_SDRAM0_SIZE == 64)
+#if (CONFIG_SYS_SDRAM0_SIZE == 64)
 /* With a 64 MB DIMM, the PSDMR is configured as follows:
  *
  *     - Bank Based Interleaving,
@@ -934,7 +934,7 @@
  *     - earliest timing for PRECHARGE after last data was written is 1 clock,
  *     - CAS Latency is 2.
  */
-#define CFG_PSDMR	(PSDMR_RFEN	      |\
+#define CONFIG_SYS_PSDMR	(PSDMR_RFEN	      |\
 			 PSDMR_SDAM_A14_IS_A5 |\
 			 PSDMR_BSMA_A14_A16   |\
 			 PSDMR_SDA10_PBI0_A9  |\
@@ -950,14 +950,14 @@
  * Shoot for approximately 1MHz on the prescaler.
  */
 #if (CONFIG_8260_CLKIN == (66 * 1000 * 1000))
-#define CFG_MPTPR	MPTPR_PTP_DIV64
+#define CONFIG_SYS_MPTPR	MPTPR_PTP_DIV64
 #elif (CONFIG_8260_CLKIN == (33 * 1000 * 1000))
-#define CFG_MPTPR	MPTPR_PTP_DIV32
+#define CONFIG_SYS_MPTPR	MPTPR_PTP_DIV32
 #else
-#warning "Unconfigured bus clock freq: check CFG_MPTPR and CFG_PSRT are OK"
-#define CFG_MPTPR	MPTPR_PTP_DIV32
+#warning "Unconfigured bus clock freq: check CONFIG_SYS_MPTPR and CONFIG_SYS_PSRT are OK"
+#define CONFIG_SYS_MPTPR	MPTPR_PTP_DIV32
 #endif
-#define CFG_PSRT	14
+#define CONFIG_SYS_PSRT	14
 
 
 /* Bank 4 - On board SDRAM
@@ -978,7 +978,7 @@
  * This expects the on board FLASH SIMM to be connected to *CS6
  * It consists of 1 AM29F016A part.
  */
-#if (defined(CFG_FLASH1_BASE) && defined(CFG_FLASH1_SIZE))
+#if (defined(CONFIG_SYS_FLASH1_BASE) && defined(CONFIG_SYS_FLASH1_SIZE))
 
 /* BR6 is configured as follows:
  *
@@ -992,7 +992,7 @@
  *     - No data pipelining is done
  *     - Valid
  */
-#  define CFG_BR6_PRELIM  ((CFG_FLASH1_BASE & BRx_BA_MSK) |\
+#  define CONFIG_SYS_BR6_PRELIM  ((CONFIG_SYS_FLASH1_BASE & BRx_BA_MSK) |\
 			   BRx_PS_8			  |\
 			   BRx_MS_GPCM_P		  |\
 			   BRx_V)
@@ -1011,13 +1011,13 @@
  *     - One idle clock is inserted between a read access from the
  *	 current bank and the next access.
  */
-#  define CFG_OR6_PRELIM  (MEG_TO_AM(CFG_FLASH1_SIZE)  |\
+#  define CONFIG_SYS_OR6_PRELIM  (MEG_TO_AM(CONFIG_SYS_FLASH1_SIZE)  |\
 			   ORxG_CSNT		       |\
 			   ORxG_ACS_DIV1	       |\
 			   ORxG_SCY_5_CLK	       |\
 			   ORxG_TRLX		       |\
 			   ORxG_EHTR)
-#endif /* (defined(CFG_FLASH1_BASE) && defined(CFG_FLASH1_SIZE)) */
+#endif /* (defined(CONFIG_SYS_FLASH1_BASE) && defined(CONFIG_SYS_FLASH1_SIZE)) */
 
 /*-----------------------------------------------------------------------
  * BR7 - Base Register
@@ -1032,7 +1032,7 @@
  *  LEDs     are at 0x00001 (write only)
  *  switches are at 0x00001 (read only)
  */
-#ifdef CFG_LED_BASE
+#ifdef CONFIG_SYS_LED_BASE
 
 /* BR7 is configured as follows:
  *
@@ -1046,7 +1046,7 @@
  *     - No data pipelining is done
  *     - Valid
  */
-#  define CFG_BR7_PRELIM  ((CFG_LED_BASE & BRx_BA_MSK)	 |\
+#  define CONFIG_SYS_BR7_PRELIM  ((CONFIG_SYS_LED_BASE & BRx_BA_MSK)	 |\
 			   BRx_PS_8			 |\
 			   BRx_MS_GPCM_P		 |\
 			   BRx_V)
@@ -1065,13 +1065,13 @@
  *     - One idle clock is inserted between a read access from the
  *	 current bank and the next access.
  */
-#  define CFG_OR7_PRELIM  (ORxG_AM_MSK		       |\
+#  define CONFIG_SYS_OR7_PRELIM  (ORxG_AM_MSK		       |\
 			   ORxG_CSNT		       |\
 			   ORxG_ACS_DIV1	       |\
 			   ORxG_SCY_15_CLK	       |\
 			   ORxG_TRLX		       |\
 			   ORxG_EHTR)
-#endif /* CFG_LED_BASE */
+#endif /* CONFIG_SYS_LED_BASE */
 
 /*
  * Internal Definitions
diff --git a/include/configs/sbc8349.h b/include/configs/sbc8349.h
index 261229c48..0603e3c8a 100644
--- a/include/configs/sbc8349.h
+++ b/include/configs/sbc8349.h
@@ -63,11 +63,11 @@
 
 #undef CONFIG_BOARD_EARLY_INIT_F		/* call board_pre_init */
 
-#define CFG_IMMR		0xE0000000
+#define CONFIG_SYS_IMMR		0xE0000000
 
-#undef CFG_DRAM_TEST				/* memory test, takes time */
-#define CFG_MEMTEST_START	0x00000000	/* memtest region */
-#define CFG_MEMTEST_END		0x00100000
+#undef CONFIG_SYS_DRAM_TEST				/* memory test, takes time */
+#define CONFIG_SYS_MEMTEST_START	0x00000000	/* memtest region */
+#define CONFIG_SYS_MEMTEST_END		0x00100000
 
 /*
  * DDR Setup
@@ -75,7 +75,7 @@
 #undef CONFIG_DDR_ECC			/* only for ECC DDR module */
 #undef CONFIG_DDR_ECC_CMD		/* use DDR ECC user commands */
 #define CONFIG_SPD_EEPROM		/* use SPD EEPROM for DDR setup*/
-#define CFG_83XX_DDR_USES_CS0		/* WRS; Fsl board uses CS2/CS3 */
+#define CONFIG_SYS_83XX_DDR_USES_CS0		/* WRS; Fsl board uses CS2/CS3 */
 
 /*
  * 32-bit data path mode.
@@ -89,10 +89,10 @@
  */
 #undef CONFIG_DDR_32BIT
 
-#define CFG_DDR_BASE		0x00000000	/* DDR is system memory*/
-#define CFG_SDRAM_BASE		CFG_DDR_BASE
-#define CFG_DDR_SDRAM_BASE	CFG_DDR_BASE
-#define CFG_DDR_SDRAM_CLK_CNTL	(DDR_SDRAM_CLK_CNTL_SS_EN | \
+#define CONFIG_SYS_DDR_BASE		0x00000000	/* DDR is system memory*/
+#define CONFIG_SYS_SDRAM_BASE		CONFIG_SYS_DDR_BASE
+#define CONFIG_SYS_DDR_SDRAM_BASE	CONFIG_SYS_DDR_BASE
+#define CONFIG_SYS_DDR_SDRAM_CLK_CNTL	(DDR_SDRAM_CLK_CNTL_SS_EN | \
 				DDR_SDRAM_CLK_CNTL_CLK_ADJUST_075)
 #define CONFIG_DDR_2T_TIMING
 
@@ -107,72 +107,71 @@
  * Manually set up DDR parameters
  * NB: manual DDR setup untested on sbc834x
  */
-#define CFG_DDR_SIZE		256		/* MB */
-#define CFG_DDR_CONFIG		(CSCONFIG_EN | CSCONFIG_ROW_BIT_13 | CSCONFIG_COL_BIT_10)
-#define CFG_DDR_TIMING_1	0x36332321
-#define CFG_DDR_TIMING_2	0x00000800	/* P9-45,may need tuning */
-#define CFG_DDR_CONTROL		0xc2000000	/* unbuffered,no DYN_PWR */
-#define CFG_DDR_INTERVAL	0x04060100	/* autocharge,no open page */
+#define CONFIG_SYS_DDR_SIZE		256		/* MB */
+#define CONFIG_SYS_DDR_CONFIG		(CSCONFIG_EN | CSCONFIG_ROW_BIT_13 | CSCONFIG_COL_BIT_10)
+#define CONFIG_SYS_DDR_TIMING_1	0x36332321
+#define CONFIG_SYS_DDR_TIMING_2	0x00000800	/* P9-45,may need tuning */
+#define CONFIG_SYS_DDR_CONTROL		0xc2000000	/* unbuffered,no DYN_PWR */
+#define CONFIG_SYS_DDR_INTERVAL	0x04060100	/* autocharge,no open page */
 
 #if defined(CONFIG_DDR_32BIT)
 /* set burst length to 8 for 32-bit data path */
-#define CFG_DDR_MODE		0x00000023	/* DLL,normal,seq,4/2.5, 8 burst len */
+#define CONFIG_SYS_DDR_MODE		0x00000023	/* DLL,normal,seq,4/2.5, 8 burst len */
 #else
 /* the default burst length is 4 - for 64-bit data path */
-#define CFG_DDR_MODE		0x00000022	/* DLL,normal,seq,4/2.5, 4 burst len */
+#define CONFIG_SYS_DDR_MODE		0x00000022	/* DLL,normal,seq,4/2.5, 4 burst len */
 #endif
 #endif
 
 /*
  * SDRAM on the Local Bus
  */
-#define CFG_LBC_SDRAM_BASE	0x10000000	/* Localbus SDRAM */
-#define CFG_LBC_SDRAM_SIZE	128		/* LBC SDRAM is 128MB */
+#define CONFIG_SYS_LBC_SDRAM_BASE	0x10000000	/* Localbus SDRAM */
+#define CONFIG_SYS_LBC_SDRAM_SIZE	128		/* LBC SDRAM is 128MB */
 
 /*
  * FLASH on the Local Bus
  */
-#define CFG_FLASH_CFI				/* use the Common Flash Interface */
+#define CONFIG_SYS_FLASH_CFI				/* use the Common Flash Interface */
 #define CONFIG_FLASH_CFI_DRIVER			/* use the CFI driver */
-#define CFG_FLASH_BASE		0xFF800000	/* start of FLASH   */
-#define CFG_FLASH_SIZE		8		/* flash size in MB */
-/* #define CFG_FLASH_USE_BUFFER_WRITE */
+#define CONFIG_SYS_FLASH_BASE		0xFF800000	/* start of FLASH   */
+#define CONFIG_SYS_FLASH_SIZE		8		/* flash size in MB */
+/* #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE */
 
-#define CFG_BR0_PRELIM		(CFG_FLASH_BASE |	/* flash Base address */ \
+#define CONFIG_SYS_BR0_PRELIM		(CONFIG_SYS_FLASH_BASE |	/* flash Base address */ \
 				(2 << BR_PS_SHIFT) |	/* 32 bit port size */	 \
 				BR_V)			/* valid */
 
-#define CFG_OR0_PRELIM		0xFF806FF7	/* 8 MB flash size */
-#define CFG_LBLAWBAR0_PRELIM	CFG_FLASH_BASE	/* window base at flash base */
-#define CFG_LBLAWAR0_PRELIM	0x80000016	/* 8 MB window size */
+#define CONFIG_SYS_OR0_PRELIM		0xFF806FF7	/* 8 MB flash size */
+#define CONFIG_SYS_LBLAWBAR0_PRELIM	CONFIG_SYS_FLASH_BASE	/* window base at flash base */
+#define CONFIG_SYS_LBLAWAR0_PRELIM	0x80000016	/* 8 MB window size */
 
-#define CFG_MAX_FLASH_BANKS	1		/* number of banks */
-#define CFG_MAX_FLASH_SECT	64		/* sectors per device */
+#define CONFIG_SYS_MAX_FLASH_BANKS	1		/* number of banks */
+#define CONFIG_SYS_MAX_FLASH_SECT	64		/* sectors per device */
 
-#undef CFG_FLASH_CHECKSUM
-#define CFG_FLASH_ERASE_TOUT	60000	/* Flash Erase Timeout (ms) */
-#define CFG_FLASH_WRITE_TOUT	500	/* Flash Write Timeout (ms) */
+#undef CONFIG_SYS_FLASH_CHECKSUM
+#define CONFIG_SYS_FLASH_ERASE_TOUT	60000	/* Flash Erase Timeout (ms) */
+#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Flash Write Timeout (ms) */
 
-#define CFG_MID_FLASH_JUMP	0x7F000000
-#define CFG_MONITOR_BASE	TEXT_BASE	/* start of monitor */
+#define CONFIG_SYS_MID_FLASH_JUMP	0x7F000000
+#define CONFIG_SYS_MONITOR_BASE	TEXT_BASE	/* start of monitor */
 
-#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
-#define CFG_RAMBOOT
+#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
+#define CONFIG_SYS_RAMBOOT
 #else
-#undef  CFG_RAMBOOT
+#undef  CONFIG_SYS_RAMBOOT
 #endif
 
-#define CONFIG_L1_INIT_RAM
-#define CFG_INIT_RAM_LOCK	1
-#define CFG_INIT_RAM_ADDR	0xFD000000		/* Initial RAM address */
-#define CFG_INIT_RAM_END	0x1000			/* End of used area in RAM*/
+#define CONFIG_SYS_INIT_RAM_LOCK	1
+#define CONFIG_SYS_INIT_RAM_ADDR	0xFD000000		/* Initial RAM address */
+#define CONFIG_SYS_INIT_RAM_END	0x1000			/* End of used area in RAM*/
 
-#define CFG_GBL_DATA_SIZE	0x100			/* num bytes initial data */
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_GBL_DATA_SIZE	0x100			/* num bytes initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
-#define CFG_MONITOR_LEN		(256 * 1024)		/* Reserve 256 kB for Mon */
-#define CFG_MALLOC_LEN		(128 * 1024)		/* Reserved for malloc */
+#define CONFIG_SYS_MONITOR_LEN		(256 * 1024)		/* Reserve 256 kB for Mon */
+#define CONFIG_SYS_MALLOC_LEN		(128 * 1024)		/* Reserved for malloc */
 
 /*
  * Local Bus LCRR and LBCR regs
@@ -180,16 +179,16 @@
  * External Local Bus rate is
  *    CLKIN * HRCWL_CSB_TO_CLKIN / HRCWL_LCL_BUS_TO_SCB_CLK / LCRR_CLKDIV
  */
-#define CFG_LCRR	(LCRR_DBYP | LCRR_CLKDIV_4)
-#define CFG_LBC_LBCR	0x00000000
+#define CONFIG_SYS_LCRR	(LCRR_DBYP | LCRR_CLKDIV_4)
+#define CONFIG_SYS_LBC_LBCR	0x00000000
 
-#undef CFG_LB_SDRAM	/* if board has SDRAM on local bus */
+#undef CONFIG_SYS_LB_SDRAM	/* if board has SDRAM on local bus */
 
-#ifdef CFG_LB_SDRAM
+#ifdef CONFIG_SYS_LB_SDRAM
 /* Local bus BR2, OR2 definition for SDRAM if soldered on the board*/
 /*
  * Base Register 2 and Option Register 2 configure SDRAM.
- * The SDRAM base address, CFG_LBC_SDRAM_BASE, is 0xf0000000.
+ * The SDRAM base address, CONFIG_SYS_LBC_SDRAM_BASE, is 0xf0000000.
  *
  * For BR2, need:
  *    Base address of 0xf0000000 = BR[0:16] = 1111 0000 0000 0000 0
@@ -201,16 +200,16 @@
  * 0    4    8    12   16   20   24   28
  * 1111 0000 0000 0000 0001 1000 0110 0001 = F0001861
  *
- * FIXME: CFG_LBC_SDRAM_BASE should be masked and OR'ed into
+ * FIXME: CONFIG_SYS_LBC_SDRAM_BASE should be masked and OR'ed into
  * FIXME: the top 17 bits of BR2.
  */
 
-#define CFG_BR2_PRELIM		0xF0001861 /* Port-size=32bit, MSEL=SDRAM */
-#define CFG_LBLAWBAR2_PRELIM	0xF0000000
-#define CFG_LBLAWAR2_PRELIM	0x80000019 /* 64M */
+#define CONFIG_SYS_BR2_PRELIM		0xF0001861 /* Port-size=32bit, MSEL=SDRAM */
+#define CONFIG_SYS_LBLAWBAR2_PRELIM	0xF0000000
+#define CONFIG_SYS_LBLAWAR2_PRELIM	0x80000019 /* 64M */
 
 /*
- * The SDRAM size in MB, CFG_LBC_SDRAM_SIZE, is 64.
+ * The SDRAM size in MB, CONFIG_SYS_LBC_SDRAM_SIZE, is 64.
  *
  * For OR2, need:
  *    64MB mask for AM, OR2[0:7] = 1111 1100
@@ -223,65 +222,65 @@
  * 1111 1100 0000 0000 0110 1001 0000 0001 = FC006901
  */
 
-#define CFG_OR2_PRELIM	0xFC006901
+#define CONFIG_SYS_OR2_PRELIM	0xFC006901
 
-#define CFG_LBC_LSRT	0x32000000    /* LB sdram refresh timer, about 6us */
-#define CFG_LBC_MRTPR	0x20000000    /* LB refresh timer prescal, 266MHz/32 */
+#define CONFIG_SYS_LBC_LSRT	0x32000000    /* LB sdram refresh timer, about 6us */
+#define CONFIG_SYS_LBC_MRTPR	0x20000000    /* LB refresh timer prescal, 266MHz/32 */
 
 /*
  * LSDMR masks
  */
-#define CFG_LBC_LSDMR_RFEN	(1 << (31 -  1))
-#define CFG_LBC_LSDMR_BSMA1516	(3 << (31 - 10))
-#define CFG_LBC_LSDMR_BSMA1617	(4 << (31 - 10))
-#define CFG_LBC_LSDMR_RFCR5	(3 << (31 - 16))
-#define CFG_LBC_LSDMR_RFCR8	(5 << (31 - 16))
-#define CFG_LBC_LSDMR_RFCR16	(7 << (31 - 16))
-#define CFG_LBC_LSDMR_PRETOACT3	(3 << (31 - 19))
-#define CFG_LBC_LSDMR_PRETOACT6	(5 << (31 - 19))
-#define CFG_LBC_LSDMR_PRETOACT7	(7 << (31 - 19))
-#define CFG_LBC_LSDMR_ACTTORW3	(3 << (31 - 22))
-#define CFG_LBC_LSDMR_ACTTORW7	(7 << (31 - 22))
-#define CFG_LBC_LSDMR_ACTTORW6	(6 << (31 - 22))
-#define CFG_LBC_LSDMR_BL8	(1 << (31 - 23))
-#define CFG_LBC_LSDMR_WRC2	(2 << (31 - 27))
-#define CFG_LBC_LSDMR_WRC3	(3 << (31 - 27))
-#define CFG_LBC_LSDMR_WRC4	(0 << (31 - 27))
-#define CFG_LBC_LSDMR_BUFCMD	(1 << (31 - 29))
-#define CFG_LBC_LSDMR_CL3	(3 << (31 - 31))
-
-#define CFG_LBC_LSDMR_OP_NORMAL	(0 << (31 - 4))
-#define CFG_LBC_LSDMR_OP_ARFRSH	(1 << (31 - 4))
-#define CFG_LBC_LSDMR_OP_SRFRSH	(2 << (31 - 4))
-#define CFG_LBC_LSDMR_OP_MRW	(3 << (31 - 4))
-#define CFG_LBC_LSDMR_OP_PRECH	(4 << (31 - 4))
-#define CFG_LBC_LSDMR_OP_PCHALL	(5 << (31 - 4))
-#define CFG_LBC_LSDMR_OP_ACTBNK	(6 << (31 - 4))
-#define CFG_LBC_LSDMR_OP_RWINV	(7 << (31 - 4))
-
-#define CFG_LBC_LSDMR_COMMON    ( CFG_LBC_LSDMR_RFEN            \
-				| CFG_LBC_LSDMR_BSMA1516	\
-				| CFG_LBC_LSDMR_RFCR8		\
-				| CFG_LBC_LSDMR_PRETOACT6	\
-				| CFG_LBC_LSDMR_ACTTORW3	\
-				| CFG_LBC_LSDMR_BL8		\
-				| CFG_LBC_LSDMR_WRC3		\
-				| CFG_LBC_LSDMR_CL3		\
+#define CONFIG_SYS_LBC_LSDMR_RFEN	(1 << (31 -  1))
+#define CONFIG_SYS_LBC_LSDMR_BSMA1516	(3 << (31 - 10))
+#define CONFIG_SYS_LBC_LSDMR_BSMA1617	(4 << (31 - 10))
+#define CONFIG_SYS_LBC_LSDMR_RFCR5	(3 << (31 - 16))
+#define CONFIG_SYS_LBC_LSDMR_RFCR8	(5 << (31 - 16))
+#define CONFIG_SYS_LBC_LSDMR_RFCR16	(7 << (31 - 16))
+#define CONFIG_SYS_LBC_LSDMR_PRETOACT3	(3 << (31 - 19))
+#define CONFIG_SYS_LBC_LSDMR_PRETOACT6	(5 << (31 - 19))
+#define CONFIG_SYS_LBC_LSDMR_PRETOACT7	(7 << (31 - 19))
+#define CONFIG_SYS_LBC_LSDMR_ACTTORW3	(3 << (31 - 22))
+#define CONFIG_SYS_LBC_LSDMR_ACTTORW7	(7 << (31 - 22))
+#define CONFIG_SYS_LBC_LSDMR_ACTTORW6	(6 << (31 - 22))
+#define CONFIG_SYS_LBC_LSDMR_BL8	(1 << (31 - 23))
+#define CONFIG_SYS_LBC_LSDMR_WRC2	(2 << (31 - 27))
+#define CONFIG_SYS_LBC_LSDMR_WRC3	(3 << (31 - 27))
+#define CONFIG_SYS_LBC_LSDMR_WRC4	(0 << (31 - 27))
+#define CONFIG_SYS_LBC_LSDMR_BUFCMD	(1 << (31 - 29))
+#define CONFIG_SYS_LBC_LSDMR_CL3	(3 << (31 - 31))
+
+#define CONFIG_SYS_LBC_LSDMR_OP_NORMAL	(0 << (31 - 4))
+#define CONFIG_SYS_LBC_LSDMR_OP_ARFRSH	(1 << (31 - 4))
+#define CONFIG_SYS_LBC_LSDMR_OP_SRFRSH	(2 << (31 - 4))
+#define CONFIG_SYS_LBC_LSDMR_OP_MRW	(3 << (31 - 4))
+#define CONFIG_SYS_LBC_LSDMR_OP_PRECH	(4 << (31 - 4))
+#define CONFIG_SYS_LBC_LSDMR_OP_PCHALL	(5 << (31 - 4))
+#define CONFIG_SYS_LBC_LSDMR_OP_ACTBNK	(6 << (31 - 4))
+#define CONFIG_SYS_LBC_LSDMR_OP_RWINV	(7 << (31 - 4))
+
+#define CONFIG_SYS_LBC_LSDMR_COMMON    ( CONFIG_SYS_LBC_LSDMR_RFEN            \
+				| CONFIG_SYS_LBC_LSDMR_BSMA1516	\
+				| CONFIG_SYS_LBC_LSDMR_RFCR8		\
+				| CONFIG_SYS_LBC_LSDMR_PRETOACT6	\
+				| CONFIG_SYS_LBC_LSDMR_ACTTORW3	\
+				| CONFIG_SYS_LBC_LSDMR_BL8		\
+				| CONFIG_SYS_LBC_LSDMR_WRC3		\
+				| CONFIG_SYS_LBC_LSDMR_CL3		\
 				)
 
 /*
  * SDRAM Controller configuration sequence.
  */
-#define CFG_LBC_LSDMR_1		( CFG_LBC_LSDMR_COMMON \
-				| CFG_LBC_LSDMR_OP_PCHALL)
-#define CFG_LBC_LSDMR_2		( CFG_LBC_LSDMR_COMMON \
-				| CFG_LBC_LSDMR_OP_ARFRSH)
-#define CFG_LBC_LSDMR_3		( CFG_LBC_LSDMR_COMMON \
-				| CFG_LBC_LSDMR_OP_ARFRSH)
-#define CFG_LBC_LSDMR_4		( CFG_LBC_LSDMR_COMMON \
-				| CFG_LBC_LSDMR_OP_MRW)
-#define CFG_LBC_LSDMR_5		( CFG_LBC_LSDMR_COMMON \
-				| CFG_LBC_LSDMR_OP_NORMAL)
+#define CONFIG_SYS_LBC_LSDMR_1		( CONFIG_SYS_LBC_LSDMR_COMMON \
+				| CONFIG_SYS_LBC_LSDMR_OP_PCHALL)
+#define CONFIG_SYS_LBC_LSDMR_2		( CONFIG_SYS_LBC_LSDMR_COMMON \
+				| CONFIG_SYS_LBC_LSDMR_OP_ARFRSH)
+#define CONFIG_SYS_LBC_LSDMR_3		( CONFIG_SYS_LBC_LSDMR_COMMON \
+				| CONFIG_SYS_LBC_LSDMR_OP_ARFRSH)
+#define CONFIG_SYS_LBC_LSDMR_4		( CONFIG_SYS_LBC_LSDMR_COMMON \
+				| CONFIG_SYS_LBC_LSDMR_OP_MRW)
+#define CONFIG_SYS_LBC_LSDMR_5		( CONFIG_SYS_LBC_LSDMR_COMMON \
+				| CONFIG_SYS_LBC_LSDMR_OP_NORMAL)
 #endif
 
 /*
@@ -289,22 +288,22 @@
  */
 #define CONFIG_CONS_INDEX     1
 #undef CONFIG_SERIAL_SOFTWARE_FIFO
-#define CFG_NS16550
-#define CFG_NS16550_SERIAL
-#define CFG_NS16550_REG_SIZE    1
-#define CFG_NS16550_CLK		get_bus_freq(0)
+#define CONFIG_SYS_NS16550
+#define CONFIG_SYS_NS16550_SERIAL
+#define CONFIG_SYS_NS16550_REG_SIZE    1
+#define CONFIG_SYS_NS16550_CLK		get_bus_freq(0)
 
-#define CFG_BAUDRATE_TABLE  \
+#define CONFIG_SYS_BAUDRATE_TABLE  \
 	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200}
 
-#define CFG_NS16550_COM1        (CFG_IMMR+0x4500)
-#define CFG_NS16550_COM2        (CFG_IMMR+0x4600)
+#define CONFIG_SYS_NS16550_COM1        (CONFIG_SYS_IMMR+0x4500)
+#define CONFIG_SYS_NS16550_COM2        (CONFIG_SYS_IMMR+0x4600)
 
 #define CONFIG_CMDLINE_EDITING	1	/* add command line history	*/
 /* Use the HUSH parser */
-#define CFG_HUSH_PARSER
-#ifdef  CFG_HUSH_PARSER
-#define CFG_PROMPT_HUSH_PS2 "> "
+#define CONFIG_SYS_HUSH_PARSER
+#ifdef  CONFIG_SYS_HUSH_PARSER
+#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
 #endif
 
 /* pass open firmware flat tree */
@@ -317,43 +316,43 @@
 #undef CONFIG_SOFT_I2C			/* I2C bit-banged */
 #define CONFIG_FSL_I2C
 #define CONFIG_I2C_CMD_TREE
-#define CFG_I2C_SPEED		400000	/* I2C speed and slave address */
-#define CFG_I2C_SLAVE		0x7F
-#define CFG_I2C_NOPROBES	{0x69}	/* Don't probe these addrs */
-#define CFG_I2C1_OFFSET		0x3000
-#define CFG_I2C2_OFFSET		0x3100
-#define CFG_I2C_OFFSET		CFG_I2C2_OFFSET
+#define CONFIG_SYS_I2C_SPEED		400000	/* I2C speed and slave address */
+#define CONFIG_SYS_I2C_SLAVE		0x7F
+#define CONFIG_SYS_I2C_NOPROBES	{0x69}	/* Don't probe these addrs */
+#define CONFIG_SYS_I2C1_OFFSET		0x3000
+#define CONFIG_SYS_I2C2_OFFSET		0x3100
+#define CONFIG_SYS_I2C_OFFSET		CONFIG_SYS_I2C2_OFFSET
 /* could also use CONFIG_I2C_MULTI_BUS and CONFIG_SPD_BUS_NUM... */
 
 /* TSEC */
-#define CFG_TSEC1_OFFSET 0x24000
-#define CFG_TSEC1 (CFG_IMMR+CFG_TSEC1_OFFSET)
-#define CFG_TSEC2_OFFSET 0x25000
-#define CFG_TSEC2 (CFG_IMMR+CFG_TSEC2_OFFSET)
+#define CONFIG_SYS_TSEC1_OFFSET 0x24000
+#define CONFIG_SYS_TSEC1 (CONFIG_SYS_IMMR+CONFIG_SYS_TSEC1_OFFSET)
+#define CONFIG_SYS_TSEC2_OFFSET 0x25000
+#define CONFIG_SYS_TSEC2 (CONFIG_SYS_IMMR+CONFIG_SYS_TSEC2_OFFSET)
 
 /*
  * General PCI
  * Addresses are mapped 1-1.
  */
-#define CFG_PCI1_MEM_BASE	0x80000000
-#define CFG_PCI1_MEM_PHYS	CFG_PCI1_MEM_BASE
-#define CFG_PCI1_MEM_SIZE	0x10000000	/* 256M */
-#define CFG_PCI1_MMIO_BASE	0x90000000
-#define CFG_PCI1_MMIO_PHYS	CFG_PCI1_MMIO_BASE
-#define CFG_PCI1_MMIO_SIZE	0x10000000	/* 256M */
-#define CFG_PCI1_IO_BASE	0x00000000
-#define CFG_PCI1_IO_PHYS	0xE2000000
-#define CFG_PCI1_IO_SIZE	0x00100000	/* 1M */
-
-#define CFG_PCI2_MEM_BASE	0xA0000000
-#define CFG_PCI2_MEM_PHYS	CFG_PCI2_MEM_BASE
-#define CFG_PCI2_MEM_SIZE	0x10000000	/* 256M */
-#define CFG_PCI2_MMIO_BASE	0xB0000000
-#define CFG_PCI2_MMIO_PHYS	CFG_PCI2_MMIO_BASE
-#define CFG_PCI2_MMIO_SIZE	0x10000000	/* 256M */
-#define CFG_PCI2_IO_BASE	0x00000000
-#define CFG_PCI2_IO_PHYS	0xE2100000
-#define CFG_PCI2_IO_SIZE	0x00100000	/* 1M */
+#define CONFIG_SYS_PCI1_MEM_BASE	0x80000000
+#define CONFIG_SYS_PCI1_MEM_PHYS	CONFIG_SYS_PCI1_MEM_BASE
+#define CONFIG_SYS_PCI1_MEM_SIZE	0x10000000	/* 256M */
+#define CONFIG_SYS_PCI1_MMIO_BASE	0x90000000
+#define CONFIG_SYS_PCI1_MMIO_PHYS	CONFIG_SYS_PCI1_MMIO_BASE
+#define CONFIG_SYS_PCI1_MMIO_SIZE	0x10000000	/* 256M */
+#define CONFIG_SYS_PCI1_IO_BASE	0x00000000
+#define CONFIG_SYS_PCI1_IO_PHYS	0xE2000000
+#define CONFIG_SYS_PCI1_IO_SIZE	0x00100000	/* 1M */
+
+#define CONFIG_SYS_PCI2_MEM_BASE	0xA0000000
+#define CONFIG_SYS_PCI2_MEM_PHYS	CONFIG_SYS_PCI2_MEM_BASE
+#define CONFIG_SYS_PCI2_MEM_SIZE	0x10000000	/* 256M */
+#define CONFIG_SYS_PCI2_MMIO_BASE	0xB0000000
+#define CONFIG_SYS_PCI2_MMIO_PHYS	CONFIG_SYS_PCI2_MMIO_BASE
+#define CONFIG_SYS_PCI2_MMIO_SIZE	0x10000000	/* 256M */
+#define CONFIG_SYS_PCI2_IO_BASE	0x00000000
+#define CONFIG_SYS_PCI2_IO_PHYS	0xE2100000
+#define CONFIG_SYS_PCI2_IO_SIZE	0x00100000	/* 1M */
 
 #if defined(CONFIG_PCI)
 
@@ -378,7 +377,7 @@
 #endif
 
 #undef CONFIG_PCI_SCAN_SHOW		/* show pci devices on startup */
-#define CFG_PCI_SUBSYS_VENDORID 0x1057  /* Motorola */
+#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x1057  /* Motorola */
 
 #endif	/* CONFIG_PCI */
 
@@ -412,25 +411,25 @@
 /*
  * Environment
  */
-#ifndef CFG_RAMBOOT
-	#define CFG_ENV_IS_IN_FLASH	1
-	#define CFG_ENV_ADDR		(CFG_MONITOR_BASE + 0x40000)
-	#define CFG_ENV_SECT_SIZE	0x20000	/* 128K(one sector) for env */
-	#define CFG_ENV_SIZE		0x2000
+#ifndef CONFIG_SYS_RAMBOOT
+	#define CONFIG_ENV_IS_IN_FLASH	1
+	#define CONFIG_ENV_ADDR		(CONFIG_SYS_MONITOR_BASE + 0x40000)
+	#define CONFIG_ENV_SECT_SIZE	0x20000	/* 128K(one sector) for env */
+	#define CONFIG_ENV_SIZE		0x2000
 
 /* Address and size of Redundant Environment Sector	*/
-#define CFG_ENV_ADDR_REDUND	(CFG_ENV_ADDR + CFG_ENV_SECT_SIZE)
-#define CFG_ENV_SIZE_REDUND	(CFG_ENV_SIZE)
+#define CONFIG_ENV_ADDR_REDUND	(CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE)
+#define CONFIG_ENV_SIZE_REDUND	(CONFIG_ENV_SIZE)
 
 #else
-	#define CFG_NO_FLASH		1	/* Flash is not usable now */
-	#define CFG_ENV_IS_NOWHERE	1	/* Store ENV in memory only */
-	#define CFG_ENV_ADDR		(CFG_MONITOR_BASE - 0x1000)
-	#define CFG_ENV_SIZE		0x2000
+	#define CONFIG_SYS_NO_FLASH		1	/* Flash is not usable now */
+	#define CONFIG_ENV_IS_NOWHERE	1	/* Store ENV in memory only */
+	#define CONFIG_ENV_ADDR		(CONFIG_SYS_MONITOR_BASE - 0x1000)
+	#define CONFIG_ENV_SIZE		0x2000
 #endif
 
 #define CONFIG_LOADS_ECHO	1	/* echo on for serial download */
-#define CFG_LOADS_BAUD_CHANGE	1	/* allow baudrate change */
+#define CONFIG_SYS_LOADS_BAUD_CHANGE	1	/* allow baudrate change */
 
 
 /*
@@ -455,7 +454,7 @@
     #define CONFIG_CMD_PCI
 #endif
 
-#if defined(CFG_RAMBOOT)
+#if defined(CONFIG_SYS_RAMBOOT)
     #undef CONFIG_CMD_ENV
     #undef CONFIG_CMD_LOADS
 #endif
@@ -466,60 +465,60 @@
 /*
  * Miscellaneous configurable options
  */
-#define CFG_LONGHELP			/* undef to save memory */
-#define CFG_LOAD_ADDR	0x2000000	/* default load address */
-#define CFG_PROMPT	"=> "		/* Monitor Command Prompt */
+#define CONFIG_SYS_LONGHELP			/* undef to save memory */
+#define CONFIG_SYS_LOAD_ADDR	0x2000000	/* default load address */
+#define CONFIG_SYS_PROMPT	"=> "		/* Monitor Command Prompt */
 
 #if defined(CONFIG_CMD_KGDB)
-	#define CFG_CBSIZE	1024		/* Console I/O Buffer Size */
+	#define CONFIG_SYS_CBSIZE	1024		/* Console I/O Buffer Size */
 #else
-	#define CFG_CBSIZE	256		/* Console I/O Buffer Size */
+	#define CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size */
 #endif
 
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define CFG_MAXARGS	16		/* max number of command args */
-#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size */
-#define CFG_HZ		1000		/* decrementer freq: 1ms ticks */
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS	16		/* max number of command args */
+#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size */
+#define CONFIG_SYS_HZ		1000		/* decrementer freq: 1ms ticks */
 
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define CFG_BOOTMAPSZ	(8 << 20)	/* Initial Memory map for Linux*/
+#define CONFIG_SYS_BOOTMAPSZ	(8 << 20)	/* Initial Memory map for Linux*/
 
-#define CFG_RCWH_PCIHOST 0x80000000 /* PCIHOST  */
+#define CONFIG_SYS_RCWH_PCIHOST 0x80000000 /* PCIHOST  */
 
 #if 1 /*528/264*/
-#define CFG_HRCW_LOW (\
+#define CONFIG_SYS_HRCW_LOW (\
 	HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\
 	HRCWL_DDR_TO_SCB_CLK_1X1 |\
 	HRCWL_CSB_TO_CLKIN |\
 	HRCWL_VCO_1X2 |\
 	HRCWL_CORE_TO_CSB_2X1)
 #elif 0 /*396/132*/
-#define CFG_HRCW_LOW (\
+#define CONFIG_SYS_HRCW_LOW (\
 	HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\
 	HRCWL_DDR_TO_SCB_CLK_1X1 |\
 	HRCWL_CSB_TO_CLKIN |\
 	HRCWL_VCO_1X4 |\
 	HRCWL_CORE_TO_CSB_3X1)
 #elif 0 /*264/132*/
-#define CFG_HRCW_LOW (\
+#define CONFIG_SYS_HRCW_LOW (\
 	HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\
 	HRCWL_DDR_TO_SCB_CLK_1X1 |\
 	HRCWL_CSB_TO_CLKIN |\
 	HRCWL_VCO_1X4 |\
 	HRCWL_CORE_TO_CSB_2X1)
 #elif 0 /*132/132*/
-#define CFG_HRCW_LOW (\
+#define CONFIG_SYS_HRCW_LOW (\
 	HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\
 	HRCWL_DDR_TO_SCB_CLK_1X1 |\
 	HRCWL_CSB_TO_CLKIN |\
 	HRCWL_VCO_1X4 |\
 	HRCWL_CORE_TO_CSB_1X1)
 #elif 0 /*264/264 */
-#define CFG_HRCW_LOW (\
+#define CONFIG_SYS_HRCW_LOW (\
 	HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\
 	HRCWL_DDR_TO_SCB_CLK_1X1 |\
 	HRCWL_CSB_TO_CLKIN |\
@@ -528,7 +527,7 @@
 #endif
 
 #if defined(PCI_64BIT)
-#define CFG_HRCW_HIGH (\
+#define CONFIG_SYS_HRCW_HIGH (\
 	HRCWH_PCI_HOST |\
 	HRCWH_64_BIT_PCI |\
 	HRCWH_PCI1_ARBITER_ENABLE |\
@@ -541,7 +540,7 @@
 	HRCWH_TSEC1M_IN_GMII |\
 	HRCWH_TSEC2M_IN_GMII )
 #else
-#define CFG_HRCW_HIGH (\
+#define CONFIG_SYS_HRCW_HIGH (\
 	HRCWH_PCI_HOST |\
 	HRCWH_32_BIT_PCI |\
 	HRCWH_PCI1_ARBITER_ENABLE |\
@@ -556,78 +555,78 @@
 #endif
 
 /* System IO Config */
-#define CFG_SICRH SICRH_TSOBI1
-#define CFG_SICRL SICRL_LDP_A
+#define CONFIG_SYS_SICRH SICRH_TSOBI1
+#define CONFIG_SYS_SICRL SICRL_LDP_A
 
-#define CFG_HID0_INIT	0x000000000
-#define CFG_HID0_FINAL	HID0_ENABLE_MACHINE_CHECK
+#define CONFIG_SYS_HID0_INIT	0x000000000
+#define CONFIG_SYS_HID0_FINAL	HID0_ENABLE_MACHINE_CHECK
 
-/* #define CFG_HID0_FINAL		(\
+/* #define CONFIG_SYS_HID0_FINAL		(\
 	HID0_ENABLE_INSTRUCTION_CACHE |\
 	HID0_ENABLE_M_BIT |\
 	HID0_ENABLE_ADDRESS_BROADCAST ) */
 
 
-#define CFG_HID2 HID2_HBE
+#define CONFIG_SYS_HID2 HID2_HBE
 
 #define CONFIG_HIGH_BATS	1	/* High BATs supported */
 
 /* DDR @ 0x00000000 */
-#define CFG_IBAT0L	(CFG_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
-#define CFG_IBAT0U	(CFG_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CONFIG_SYS_IBAT0L	(CONFIG_SYS_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
+#define CONFIG_SYS_IBAT0U	(CONFIG_SYS_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
 
 /* PCI @ 0x80000000 */
 #ifdef CONFIG_PCI
-#define CFG_IBAT1L	(CFG_PCI1_MEM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
-#define CFG_IBAT1U	(CFG_PCI1_MEM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
-#define CFG_IBAT2L	(CFG_PCI1_MMIO_BASE | BATL_PP_10 | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
-#define CFG_IBAT2U	(CFG_PCI1_MMIO_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CONFIG_SYS_IBAT1L	(CONFIG_SYS_PCI1_MEM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
+#define CONFIG_SYS_IBAT1U	(CONFIG_SYS_PCI1_MEM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CONFIG_SYS_IBAT2L	(CONFIG_SYS_PCI1_MMIO_BASE | BATL_PP_10 | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
+#define CONFIG_SYS_IBAT2U	(CONFIG_SYS_PCI1_MMIO_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
 #else
-#define CFG_IBAT1L	(0)
-#define CFG_IBAT1U	(0)
-#define CFG_IBAT2L	(0)
-#define CFG_IBAT2U	(0)
+#define CONFIG_SYS_IBAT1L	(0)
+#define CONFIG_SYS_IBAT1U	(0)
+#define CONFIG_SYS_IBAT2L	(0)
+#define CONFIG_SYS_IBAT2U	(0)
 #endif
 
 #ifdef CONFIG_MPC83XX_PCI2
-#define CFG_IBAT3L	(CFG_PCI2_MEM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
-#define CFG_IBAT3U	(CFG_PCI2_MEM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
-#define CFG_IBAT4L	(CFG_PCI2_MMIO_BASE | BATL_PP_10 | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
-#define CFG_IBAT4U	(CFG_PCI2_MMIO_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CONFIG_SYS_IBAT3L	(CONFIG_SYS_PCI2_MEM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
+#define CONFIG_SYS_IBAT3U	(CONFIG_SYS_PCI2_MEM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CONFIG_SYS_IBAT4L	(CONFIG_SYS_PCI2_MMIO_BASE | BATL_PP_10 | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
+#define CONFIG_SYS_IBAT4U	(CONFIG_SYS_PCI2_MMIO_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
 #else
-#define CFG_IBAT3L	(0)
-#define CFG_IBAT3U	(0)
-#define CFG_IBAT4L	(0)
-#define CFG_IBAT4U	(0)
+#define CONFIG_SYS_IBAT3L	(0)
+#define CONFIG_SYS_IBAT3U	(0)
+#define CONFIG_SYS_IBAT4L	(0)
+#define CONFIG_SYS_IBAT4U	(0)
 #endif
 
 /* IMMRBAR @ 0xE0000000, PCI IO @ 0xE2000000 */
-#define CFG_IBAT5L	(CFG_IMMR | BATL_PP_10 | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
-#define CFG_IBAT5U	(CFG_IMMR | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CONFIG_SYS_IBAT5L	(CONFIG_SYS_IMMR | BATL_PP_10 | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
+#define CONFIG_SYS_IBAT5U	(CONFIG_SYS_IMMR | BATU_BL_256M | BATU_VS | BATU_VP)
 
 /* SDRAM @ 0xF0000000, stack in DCACHE 0xFDF00000 & FLASH @ 0xFE000000 */
-#define CFG_IBAT6L	(0xF0000000 | BATL_PP_10 | BATL_MEMCOHERENCE)
-#define CFG_IBAT6U	(0xF0000000 | BATU_BL_256M | BATU_VS | BATU_VP)
-
-#define CFG_IBAT7L	(0)
-#define CFG_IBAT7U	(0)
-
-#define CFG_DBAT0L	CFG_IBAT0L
-#define CFG_DBAT0U	CFG_IBAT0U
-#define CFG_DBAT1L	CFG_IBAT1L
-#define CFG_DBAT1U	CFG_IBAT1U
-#define CFG_DBAT2L	CFG_IBAT2L
-#define CFG_DBAT2U	CFG_IBAT2U
-#define CFG_DBAT3L	CFG_IBAT3L
-#define CFG_DBAT3U	CFG_IBAT3U
-#define CFG_DBAT4L	CFG_IBAT4L
-#define CFG_DBAT4U	CFG_IBAT4U
-#define CFG_DBAT5L	CFG_IBAT5L
-#define CFG_DBAT5U	CFG_IBAT5U
-#define CFG_DBAT6L	CFG_IBAT6L
-#define CFG_DBAT6U	CFG_IBAT6U
-#define CFG_DBAT7L	CFG_IBAT7L
-#define CFG_DBAT7U	CFG_IBAT7U
+#define CONFIG_SYS_IBAT6L	(0xF0000000 | BATL_PP_10 | BATL_MEMCOHERENCE)
+#define CONFIG_SYS_IBAT6U	(0xF0000000 | BATU_BL_256M | BATU_VS | BATU_VP)
+
+#define CONFIG_SYS_IBAT7L	(0)
+#define CONFIG_SYS_IBAT7U	(0)
+
+#define CONFIG_SYS_DBAT0L	CONFIG_SYS_IBAT0L
+#define CONFIG_SYS_DBAT0U	CONFIG_SYS_IBAT0U
+#define CONFIG_SYS_DBAT1L	CONFIG_SYS_IBAT1L
+#define CONFIG_SYS_DBAT1U	CONFIG_SYS_IBAT1U
+#define CONFIG_SYS_DBAT2L	CONFIG_SYS_IBAT2L
+#define CONFIG_SYS_DBAT2U	CONFIG_SYS_IBAT2U
+#define CONFIG_SYS_DBAT3L	CONFIG_SYS_IBAT3L
+#define CONFIG_SYS_DBAT3U	CONFIG_SYS_IBAT3U
+#define CONFIG_SYS_DBAT4L	CONFIG_SYS_IBAT4L
+#define CONFIG_SYS_DBAT4U	CONFIG_SYS_IBAT4U
+#define CONFIG_SYS_DBAT5L	CONFIG_SYS_IBAT5L
+#define CONFIG_SYS_DBAT5U	CONFIG_SYS_IBAT5U
+#define CONFIG_SYS_DBAT6L	CONFIG_SYS_IBAT6L
+#define CONFIG_SYS_DBAT6U	CONFIG_SYS_IBAT6U
+#define CONFIG_SYS_DBAT7L	CONFIG_SYS_IBAT7L
+#define CONFIG_SYS_DBAT7U	CONFIG_SYS_IBAT7U
 
 /*
  * Internal Definitions
diff --git a/include/configs/sbc8548.h b/include/configs/sbc8548.h
index 9ef0bfdd8..528c81090 100644
--- a/include/configs/sbc8548.h
+++ b/include/configs/sbc8548.h
@@ -59,7 +59,6 @@
  */
 #define CONFIG_L2_CACHE			/* toggle L2 cache */
 #define CONFIG_BTB			/* toggle branch predition */
-#define CONFIG_ADDR_STREAMING		/* toggle addr streaming */
 #define CONFIG_CLEAR_LAW0		/* Clear LAW0 in cpu_init_r */
 
 /*
@@ -69,22 +68,22 @@
 
 #define CONFIG_BOARD_EARLY_INIT_F	1	/* Call board_pre_init */
 
-#undef	CFG_DRAM_TEST			/* memory test, takes time */
-#define CFG_MEMTEST_START	0x00200000	/* memtest works on */
-#define CFG_MEMTEST_END		0x00400000
+#undef	CONFIG_SYS_DRAM_TEST			/* memory test, takes time */
+#define CONFIG_SYS_MEMTEST_START	0x00200000	/* memtest works on */
+#define CONFIG_SYS_MEMTEST_END		0x00400000
 
 /*
  * Base addresses -- Note these are effective addresses where the
  * actual resources get mapped (not physical addresses)
  */
-#define CFG_CCSRBAR_DEFAULT	0xff700000	/* CCSRBAR Default */
-#define CFG_CCSRBAR		0xe0000000	/* relocated CCSRBAR */
-#define CFG_CCSRBAR_PHYS	CFG_CCSRBAR	/* physical addr of CCSRBAR */
-#define CFG_IMMR		CFG_CCSRBAR	/* PQII uses CFG_IMMR */
+#define CONFIG_SYS_CCSRBAR_DEFAULT	0xff700000	/* CCSRBAR Default */
+#define CONFIG_SYS_CCSRBAR		0xe0000000	/* relocated CCSRBAR */
+#define CONFIG_SYS_CCSRBAR_PHYS	CONFIG_SYS_CCSRBAR	/* physical addr of CCSRBAR */
+#define CONFIG_SYS_IMMR		CONFIG_SYS_CCSRBAR	/* PQII uses CONFIG_SYS_IMMR */
 
-#define CFG_PCI1_ADDR	(CFG_CCSRBAR+0x8000)
-#define CFG_PCI2_ADDR	(CFG_CCSRBAR+0x9000)
-#define CFG_PCIE1_ADDR	(CFG_CCSRBAR+0xa000)
+#define CONFIG_SYS_PCI1_ADDR	(CONFIG_SYS_CCSRBAR+0x8000)
+#define CONFIG_SYS_PCI2_ADDR	(CONFIG_SYS_CCSRBAR+0x9000)
+#define CONFIG_SYS_PCIE1_ADDR	(CONFIG_SYS_CCSRBAR+0xa000)
 
 /* DDR Setup */
 #define CONFIG_FSL_DDR2
@@ -96,8 +95,8 @@
 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER	/* DDR controller or DMA? */
 #define CONFIG_MEM_INIT_VALUE	0xDeadBeef
 
-#define CFG_DDR_SDRAM_BASE	0x00000000
-#define CFG_SDRAM_BASE		CFG_DDR_SDRAM_BASE
+#define CONFIG_SYS_DDR_SDRAM_BASE	0x00000000
+#define CONFIG_SYS_SDRAM_BASE		CONFIG_SYS_DDR_SDRAM_BASE
 #define CONFIG_VERY_BIG_RAM
 
 #define CONFIG_NUM_DDR_CONTROLLERS	1
@@ -111,7 +110,7 @@
  * Make sure required options are set
  */
 #ifndef CONFIG_SPD_EEPROM
-	#define CFG_SDRAM_SIZE	256		/* DDR is 256MB */
+	#define CONFIG_SYS_SDRAM_SIZE	256		/* DDR is 256MB */
 #endif
 
 #undef CONFIG_CLOCKS_IN_MHZ
@@ -165,47 +164,47 @@
  * 1111 1000 0000 0000 0110 1110 0110 0101 = f8006e65    OR6
  */
 
-#define CFG_BOOT_BLOCK		0xff800000	/* start of 8MB Flash */
-#define CFG_FLASH_BASE		CFG_BOOT_BLOCK	/* start of FLASH 16M */
+#define CONFIG_SYS_BOOT_BLOCK		0xff800000	/* start of 8MB Flash */
+#define CONFIG_SYS_FLASH_BASE		CONFIG_SYS_BOOT_BLOCK	/* start of FLASH 16M */
 
-#define CFG_BR0_PRELIM		0xff800801
-#define CFG_BR6_PRELIM		0xfb801801
+#define CONFIG_SYS_BR0_PRELIM		0xff800801
+#define CONFIG_SYS_BR6_PRELIM		0xfb801801
 
-#define	CFG_OR0_PRELIM		0xff806e65
-#define	CFG_OR6_PRELIM		0xf8006e65
+#define	CONFIG_SYS_OR0_PRELIM		0xff806e65
+#define	CONFIG_SYS_OR6_PRELIM		0xf8006e65
 
-#define CFG_FLASH_BANKS_LIST	{CFG_FLASH_BASE}
-#define CFG_MAX_FLASH_BANKS	1		/* number of banks */
-#define CFG_MAX_FLASH_SECT	128		/* sectors per device */
-#undef	CFG_FLASH_CHECKSUM
-#define CFG_FLASH_ERASE_TOUT	60000	/* Flash Erase Timeout (ms) */
-#define CFG_FLASH_WRITE_TOUT	500	/* Flash Write Timeout (ms) */
+#define CONFIG_SYS_FLASH_BANKS_LIST	{CONFIG_SYS_FLASH_BASE}
+#define CONFIG_SYS_MAX_FLASH_BANKS	1		/* number of banks */
+#define CONFIG_SYS_MAX_FLASH_SECT	128		/* sectors per device */
+#undef	CONFIG_SYS_FLASH_CHECKSUM
+#define CONFIG_SYS_FLASH_ERASE_TOUT	60000	/* Flash Erase Timeout (ms) */
+#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Flash Write Timeout (ms) */
 
-#define CFG_MONITOR_BASE	TEXT_BASE	/* start of monitor */
+#define CONFIG_SYS_MONITOR_BASE	TEXT_BASE	/* start of monitor */
 
 #define CONFIG_FLASH_CFI_DRIVER
-#define CFG_FLASH_CFI
-#define CFG_FLASH_EMPTY_INFO
+#define CONFIG_SYS_FLASH_CFI
+#define CONFIG_SYS_FLASH_EMPTY_INFO
 
 /* CS5 = Local bus peripherals controlled by the EPLD */
 
-#define CFG_BR5_PRELIM		0xf8000801
-#define CFG_OR5_PRELIM		0xff006e65
-#define CFG_EPLD_BASE		0xf8000000
-#define CFG_LED_DISP_BASE	0xf8000000
-#define CFG_USER_SWITCHES_BASE	0xf8100000
-#define CFG_BD_REV		0xf8300000
-#define CFG_EEPROM_BASE		0xf8b00000
+#define CONFIG_SYS_BR5_PRELIM		0xf8000801
+#define CONFIG_SYS_OR5_PRELIM		0xff006e65
+#define CONFIG_SYS_EPLD_BASE		0xf8000000
+#define CONFIG_SYS_LED_DISP_BASE	0xf8000000
+#define CONFIG_SYS_USER_SWITCHES_BASE	0xf8100000
+#define CONFIG_SYS_BD_REV		0xf8300000
+#define CONFIG_SYS_EEPROM_BASE		0xf8b00000
 
 /*
  * SDRAM on the Local Bus
  */
-#define CFG_LBC_SDRAM_BASE	0xf0000000	/* Localbus SDRAM */
-#define CFG_LBC_SDRAM_SIZE	64		/* LBC SDRAM is 64MB */
+#define CONFIG_SYS_LBC_SDRAM_BASE	0xf0000000	/* Localbus SDRAM */
+#define CONFIG_SYS_LBC_SDRAM_SIZE	64		/* LBC SDRAM is 64MB */
 
 /*
  * Base Register 3 and Option Register 3 configure SDRAM.
- * The SDRAM base address, CFG_LBC_SDRAM_BASE, is 0xf0000000.
+ * The SDRAM base address, CONFIG_SYS_LBC_SDRAM_BASE, is 0xf0000000.
  *
  * For BR3, need:
  *    Base address of 0xf0000000 = BR[0:16] = 1111 0000 0000 0000 0
@@ -219,10 +218,10 @@
  *
  */
 
-#define CFG_BR3_PRELIM		0xf0001861
+#define CONFIG_SYS_BR3_PRELIM		0xf0001861
 
 /*
- * The SDRAM size in MB, CFG_LBC_SDRAM_SIZE, is 64.
+ * The SDRAM size in MB, CONFIG_SYS_LBC_SDRAM_SIZE, is 64.
  *
  * For OR3, need:
  *    64MB mask for AM, OR3[0:7] = 1111 1100
@@ -235,35 +234,35 @@
  * 1111 1100 0000 0000 0110 1100 1100 0000 = fc006cc0
  */
 
-#define CFG_OR3_PRELIM		0xfc006cc0
+#define CONFIG_SYS_OR3_PRELIM		0xfc006cc0
 
-#define CFG_LBC_LCRR		0x00000002    /* LB clock ratio reg */
-#define CFG_LBC_LBCR		0x00000000    /* LB config reg */
-#define CFG_LBC_LSRT		0x20000000  /* LB sdram refresh timer */
-#define CFG_LBC_MRTPR		0x00000000  /* LB refresh timer prescal*/
+#define CONFIG_SYS_LBC_LCRR		0x00000002    /* LB clock ratio reg */
+#define CONFIG_SYS_LBC_LBCR		0x00000000    /* LB config reg */
+#define CONFIG_SYS_LBC_LSRT		0x20000000  /* LB sdram refresh timer */
+#define CONFIG_SYS_LBC_MRTPR		0x00000000  /* LB refresh timer prescal*/
 
 /*
  * LSDMR masks
  */
-#define CFG_LBC_LSDMR_RFEN	(1 << (31 -  1))
-#define CFG_LBC_LSDMR_BSMA1516	(3 << (31 - 10))
-#define CFG_LBC_LSDMR_BSMA1617	(4 << (31 - 10))
-#define CFG_LBC_LSDMR_RFCR16	(7 << (31 - 16))
-#define CFG_LBC_LSDMR_PRETOACT7	(7 << (31 - 19))
-#define CFG_LBC_LSDMR_ACTTORW7	(7 << (31 - 22))
-#define CFG_LBC_LSDMR_ACTTORW6	(6 << (31 - 22))
-#define CFG_LBC_LSDMR_BL8	(1 << (31 - 23))
-#define CFG_LBC_LSDMR_WRC4	(0 << (31 - 27))
-#define CFG_LBC_LSDMR_CL3	(3 << (31 - 31))
-
-#define CFG_LBC_LSDMR_OP_NORMAL	(0 << (31 - 4))
-#define CFG_LBC_LSDMR_OP_ARFRSH	(1 << (31 - 4))
-#define CFG_LBC_LSDMR_OP_SRFRSH	(2 << (31 - 4))
-#define CFG_LBC_LSDMR_OP_MRW	(3 << (31 - 4))
-#define CFG_LBC_LSDMR_OP_PRECH	(4 << (31 - 4))
-#define CFG_LBC_LSDMR_OP_PCHALL	(5 << (31 - 4))
-#define CFG_LBC_LSDMR_OP_ACTBNK	(6 << (31 - 4))
-#define CFG_LBC_LSDMR_OP_RWINV	(7 << (31 - 4))
+#define CONFIG_SYS_LBC_LSDMR_RFEN	(1 << (31 -  1))
+#define CONFIG_SYS_LBC_LSDMR_BSMA1516	(3 << (31 - 10))
+#define CONFIG_SYS_LBC_LSDMR_BSMA1617	(4 << (31 - 10))
+#define CONFIG_SYS_LBC_LSDMR_RFCR16	(7 << (31 - 16))
+#define CONFIG_SYS_LBC_LSDMR_PRETOACT7	(7 << (31 - 19))
+#define CONFIG_SYS_LBC_LSDMR_ACTTORW7	(7 << (31 - 22))
+#define CONFIG_SYS_LBC_LSDMR_ACTTORW6	(6 << (31 - 22))
+#define CONFIG_SYS_LBC_LSDMR_BL8	(1 << (31 - 23))
+#define CONFIG_SYS_LBC_LSDMR_WRC4	(0 << (31 - 27))
+#define CONFIG_SYS_LBC_LSDMR_CL3	(3 << (31 - 31))
+
+#define CONFIG_SYS_LBC_LSDMR_OP_NORMAL	(0 << (31 - 4))
+#define CONFIG_SYS_LBC_LSDMR_OP_ARFRSH	(1 << (31 - 4))
+#define CONFIG_SYS_LBC_LSDMR_OP_SRFRSH	(2 << (31 - 4))
+#define CONFIG_SYS_LBC_LSDMR_OP_MRW	(3 << (31 - 4))
+#define CONFIG_SYS_LBC_LSDMR_OP_PRECH	(4 << (31 - 4))
+#define CONFIG_SYS_LBC_LSDMR_OP_PCHALL	(5 << (31 - 4))
+#define CONFIG_SYS_LBC_LSDMR_OP_ACTBNK	(6 << (31 - 4))
+#define CONFIG_SYS_LBC_LSDMR_OP_RWINV	(7 << (31 - 4))
 
 /*
  * Common settings for all Local Bus SDRAM commands.
@@ -271,47 +270,46 @@
  *                  or BSMA1617 (for CPU 1.0) (old)
  * is OR'ed in too.
  */
-#define CFG_LBC_LSDMR_COMMON	( CFG_LBC_LSDMR_RFCR16		\
-				| CFG_LBC_LSDMR_PRETOACT7	\
-				| CFG_LBC_LSDMR_ACTTORW7	\
-				| CFG_LBC_LSDMR_BL8		\
-				| CFG_LBC_LSDMR_WRC4		\
-				| CFG_LBC_LSDMR_CL3		\
-				| CFG_LBC_LSDMR_RFEN		\
+#define CONFIG_SYS_LBC_LSDMR_COMMON	( CONFIG_SYS_LBC_LSDMR_RFCR16		\
+				| CONFIG_SYS_LBC_LSDMR_PRETOACT7	\
+				| CONFIG_SYS_LBC_LSDMR_ACTTORW7	\
+				| CONFIG_SYS_LBC_LSDMR_BL8		\
+				| CONFIG_SYS_LBC_LSDMR_WRC4		\
+				| CONFIG_SYS_LBC_LSDMR_CL3		\
+				| CONFIG_SYS_LBC_LSDMR_RFEN		\
 				)
 
-#define CONFIG_L1_INIT_RAM
-#define CFG_INIT_RAM_LOCK	1
-#define CFG_INIT_RAM_ADDR	0xe4010000	/* Initial RAM address */
-#define CFG_INIT_RAM_END	0x4000		/* End of used area in RAM */
+#define CONFIG_SYS_INIT_RAM_LOCK	1
+#define CONFIG_SYS_INIT_RAM_ADDR	0xe4010000	/* Initial RAM address */
+#define CONFIG_SYS_INIT_RAM_END	0x4000		/* End of used area in RAM */
 
-#define CFG_INIT_L2_ADDR	0xf8f80000	/* relocate boot L2SRAM */
+#define CONFIG_SYS_INIT_L2_ADDR	0xf8f80000	/* relocate boot L2SRAM */
 
-#define CFG_GBL_DATA_SIZE	128		/* num bytes initial data */
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_GBL_DATA_SIZE	128		/* num bytes initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
-#define CFG_MONITOR_LEN		(256 * 1024) /* Reserve 256 kB for Mon */
-#define CFG_MALLOC_LEN		(128 * 1024)	/* Reserved for malloc */
+#define CONFIG_SYS_MONITOR_LEN		(256 * 1024) /* Reserve 256 kB for Mon */
+#define CONFIG_SYS_MALLOC_LEN		(128 * 1024)	/* Reserved for malloc */
 
 /* Serial Port */
 #define CONFIG_CONS_INDEX	1
 #undef	CONFIG_SERIAL_SOFTWARE_FIFO
-#define CFG_NS16550
-#define CFG_NS16550_SERIAL
-#define CFG_NS16550_REG_SIZE	1
-#define CFG_NS16550_CLK		400000000 /* get_bus_freq(0) */
+#define CONFIG_SYS_NS16550
+#define CONFIG_SYS_NS16550_SERIAL
+#define CONFIG_SYS_NS16550_REG_SIZE	1
+#define CONFIG_SYS_NS16550_CLK		400000000 /* get_bus_freq(0) */
 
-#define CFG_BAUDRATE_TABLE \
+#define CONFIG_SYS_BAUDRATE_TABLE \
 	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200}
 
-#define CFG_NS16550_COM1	(CFG_CCSRBAR+0x4500)
-#define CFG_NS16550_COM2	(CFG_CCSRBAR+0x4600)
+#define CONFIG_SYS_NS16550_COM1	(CONFIG_SYS_CCSRBAR+0x4500)
+#define CONFIG_SYS_NS16550_COM2	(CONFIG_SYS_CCSRBAR+0x4600)
 
 /* Use the HUSH parser */
-#define CFG_HUSH_PARSER
-#ifdef	CFG_HUSH_PARSER
-#define CFG_PROMPT_HUSH_PS2 "> "
+#define CONFIG_SYS_HUSH_PARSER
+#ifdef	CONFIG_SYS_HUSH_PARSER
+#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
 #endif
 
 /* pass open firmware flat tree */
@@ -325,48 +323,48 @@
 #define CONFIG_FSL_I2C		/* Use FSL common I2C driver */
 #define CONFIG_HARD_I2C		/* I2C with hardware support*/
 #undef	CONFIG_SOFT_I2C		/* I2C bit-banged */
-#define CFG_I2C_SPEED		400000	/* I2C speed and slave address */
-#define CFG_I2C_EEPROM_ADDR	0x50
-#define CFG_I2C_SLAVE		0x7F
-#define CFG_I2C_OFFSET		0x3000
+#define CONFIG_SYS_I2C_SPEED		400000	/* I2C speed and slave address */
+#define CONFIG_SYS_I2C_EEPROM_ADDR	0x50
+#define CONFIG_SYS_I2C_SLAVE		0x7F
+#define CONFIG_SYS_I2C_OFFSET		0x3000
 
 /*
  * General PCI
  * Memory space is mapped 1-1, but I/O space must start from 0.
  */
-#define CFG_PCI_PHYS		0x80000000	/* 1G PCI TLB */
+#define CONFIG_SYS_PCI_PHYS		0x80000000	/* 1G PCI TLB */
 
-#define CFG_PCI1_MEM_BASE	0x80000000
-#define CFG_PCI1_MEM_PHYS	CFG_PCI1_MEM_BASE
-#define CFG_PCI1_MEM_SIZE	0x20000000	/* 512M */
-#define CFG_PCI1_IO_BASE	0x00000000
-#define CFG_PCI1_IO_PHYS	0xe2000000
-#define CFG_PCI1_IO_SIZE	0x00100000	/* 1M */
+#define CONFIG_SYS_PCI1_MEM_BASE	0x80000000
+#define CONFIG_SYS_PCI1_MEM_PHYS	CONFIG_SYS_PCI1_MEM_BASE
+#define CONFIG_SYS_PCI1_MEM_SIZE	0x20000000	/* 512M */
+#define CONFIG_SYS_PCI1_IO_BASE	0x00000000
+#define CONFIG_SYS_PCI1_IO_PHYS	0xe2000000
+#define CONFIG_SYS_PCI1_IO_SIZE	0x00100000	/* 1M */
 
 #ifdef CONFIG_PCI2
-#define CFG_PCI2_MEM_BASE	0xa0000000
-#define CFG_PCI2_MEM_PHYS	CFG_PCI2_MEM_BASE
-#define CFG_PCI2_MEM_SIZE	0x20000000	/* 512M */
-#define CFG_PCI2_IO_BASE	0x00000000
-#define CFG_PCI2_IO_PHYS	0xe2800000
-#define CFG_PCI2_IO_SIZE	0x00100000	/* 1M */
+#define CONFIG_SYS_PCI2_MEM_BASE	0xa0000000
+#define CONFIG_SYS_PCI2_MEM_PHYS	CONFIG_SYS_PCI2_MEM_BASE
+#define CONFIG_SYS_PCI2_MEM_SIZE	0x20000000	/* 512M */
+#define CONFIG_SYS_PCI2_IO_BASE	0x00000000
+#define CONFIG_SYS_PCI2_IO_PHYS	0xe2800000
+#define CONFIG_SYS_PCI2_IO_SIZE	0x00100000	/* 1M */
 #endif
 
 #ifdef CONFIG_PCIE1
-#define CFG_PCIE1_MEM_BASE	0xa0000000
-#define CFG_PCIE1_MEM_PHYS	CFG_PCIE1_MEM_BASE
-#define CFG_PCIE1_MEM_SIZE	0x20000000	/* 512M */
-#define CFG_PCIE1_IO_BASE	0x00000000
-#define CFG_PCIE1_IO_PHYS	0xe3000000
-#define CFG_PCIE1_IO_SIZE	0x00100000	/*   1M */
+#define CONFIG_SYS_PCIE1_MEM_BASE	0xa0000000
+#define CONFIG_SYS_PCIE1_MEM_PHYS	CONFIG_SYS_PCIE1_MEM_BASE
+#define CONFIG_SYS_PCIE1_MEM_SIZE	0x20000000	/* 512M */
+#define CONFIG_SYS_PCIE1_IO_BASE	0x00000000
+#define CONFIG_SYS_PCIE1_IO_PHYS	0xe3000000
+#define CONFIG_SYS_PCIE1_IO_SIZE	0x00100000	/*   1M */
 #endif
 
 #ifdef CONFIG_RIO
 /*
  * RapidIO MMU
  */
-#define CFG_RIO_MEM_BASE	0xC0000000
-#define CFG_RIO_MEM_SIZE	0x20000000	/* 512M */
+#define CONFIG_SYS_RIO_MEM_BASE	0xC0000000
+#define CONFIG_SYS_RIO_MEM_SIZE	0x20000000	/* 512M */
 #endif
 
 #ifdef CONFIG_LEGACY
@@ -387,11 +385,6 @@
 
 #undef CONFIG_PCI_SCAN_SHOW		/* show pci devices on startup */
 
-/* PCI view of System Memory */
-#define CFG_PCI_MEMORY_BUS	0x00000000
-#define CFG_PCI_MEMORY_PHYS	0x00000000
-#define CFG_PCI_MEMORY_SIZE	0x80000000
-
 #endif	/* CONFIG_PCI */
 
 
@@ -434,13 +427,13 @@
 /*
  * Environment
  */
-#define CFG_ENV_IS_IN_FLASH	1
-#define CFG_ENV_ADDR		(CFG_MONITOR_BASE + 0x40000)
-#define CFG_ENV_SECT_SIZE	0x40000	/* 256K(one sector) for env */
-#define CFG_ENV_SIZE		0x2000
+#define CONFIG_ENV_IS_IN_FLASH	1
+#define CONFIG_ENV_ADDR		(CONFIG_SYS_MONITOR_BASE + 0x40000)
+#define CONFIG_ENV_SECT_SIZE	0x40000	/* 256K(one sector) for env */
+#define CONFIG_ENV_SIZE		0x2000
 
 #define CONFIG_LOADS_ECHO	1	/* echo on for serial download */
-#define CFG_LOADS_BAUD_CHANGE	1	/* allow baudrate change */
+#define CONFIG_SYS_LOADS_BAUD_CHANGE	1	/* allow baudrate change */
 
 /*
  * BOOTP options
@@ -471,25 +464,25 @@
 /*
  * Miscellaneous configurable options
  */
-#define CFG_LONGHELP			/* undef to save memory	*/
-#define CFG_LOAD_ADDR	0x2000000	/* default load address */
-#define CFG_PROMPT	"=> "		/* Monitor Command Prompt */
+#define CONFIG_SYS_LONGHELP			/* undef to save memory	*/
+#define CONFIG_SYS_LOAD_ADDR	0x2000000	/* default load address */
+#define CONFIG_SYS_PROMPT	"=> "		/* Monitor Command Prompt */
 #if defined(CONFIG_CMD_KGDB)
-#define CFG_CBSIZE	1024		/* Console I/O Buffer Size */
+#define CONFIG_SYS_CBSIZE	1024		/* Console I/O Buffer Size */
 #else
-#define CFG_CBSIZE	256		/* Console I/O Buffer Size */
+#define CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size */
 #endif
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define CFG_MAXARGS	16		/* max number of command args */
-#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size */
-#define CFG_HZ		1000		/* decrementer freq: 1ms ticks */
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS	16		/* max number of command args */
+#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size */
+#define CONFIG_SYS_HZ		1000		/* decrementer freq: 1ms ticks */
 
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define CFG_BOOTMAPSZ	(8 << 20)	/* Initial Memory map for Linux*/
+#define CONFIG_SYS_BOOTMAPSZ	(8 << 20)	/* Initial Memory map for Linux*/
 
 /*
  * Internal Definitions
diff --git a/include/configs/sbc8560.h b/include/configs/sbc8560.h
index 99d328c75..d4e9d7479 100644
--- a/include/configs/sbc8560.h
+++ b/include/configs/sbc8560.h
@@ -69,13 +69,12 @@
 /* below can be toggled for performance analysis. otherwise use default */
 #define CONFIG_L2_CACHE			    /* toggle L2 cache		*/
 #undef	CONFIG_BTB			    /* toggle branch predition	*/
-#undef	CONFIG_ADDR_STREAMING		    /* toggle addr streaming	*/
 
 #define CONFIG_BOARD_EARLY_INIT_F 1	    /* Call board_early_init_f	*/
 
-#undef	CFG_DRAM_TEST			    /* memory test, takes time	*/
-#define CFG_MEMTEST_START	0x00200000  /* memtest region */
-#define CFG_MEMTEST_END		0x00400000
+#undef	CONFIG_SYS_DRAM_TEST			    /* memory test, takes time	*/
+#define CONFIG_SYS_MEMTEST_START	0x00200000  /* memtest region */
+#define CONFIG_SYS_MEMTEST_END		0x00400000
 
 #if (defined(CONFIG_PCI) && defined(CONFIG_TSEC_ENET) || \
      defined(CONFIG_PCI) && defined(CONFIG_ETHER_ON_FCC) || \
@@ -87,17 +86,17 @@
  * Base addresses -- Note these are effective addresses where the
  * actual resources get mapped (not physical addresses)
  */
-#define CFG_CCSRBAR_DEFAULT	0xff700000	/* CCSRBAR Default	*/
+#define CONFIG_SYS_CCSRBAR_DEFAULT	0xff700000	/* CCSRBAR Default	*/
 
 #if XXX
-  #define CFG_CCSRBAR		0xfdf00000	/* relocated CCSRBAR	*/
+  #define CONFIG_SYS_CCSRBAR		0xfdf00000	/* relocated CCSRBAR	*/
 #else
-  #define CFG_CCSRBAR		0xff700000	/* default CCSRBAR	*/
+  #define CONFIG_SYS_CCSRBAR		0xff700000	/* default CCSRBAR	*/
 #endif
-#define CFG_CCSRBAR_PHYS	CFG_CCSRBAR	/* physical addr of CCSRBAR */
-#define CFG_IMMR		CFG_CCSRBAR	/* PQII uses CFG_IMMR	*/
+#define CONFIG_SYS_CCSRBAR_PHYS	CONFIG_SYS_CCSRBAR	/* physical addr of CCSRBAR */
+#define CONFIG_SYS_IMMR		CONFIG_SYS_CCSRBAR	/* PQII uses CONFIG_SYS_IMMR	*/
 
-#define CFG_SDRAM_SIZE		512		/* DDR is 512MB */
+#define CONFIG_SYS_SDRAM_SIZE		512		/* DDR is 512MB */
 
 /* DDR Setup */
 #define CONFIG_FSL_DDR1
@@ -114,8 +113,8 @@
 #undef CONFIG_ECC_INIT_VIA_DDRCONTROLLER	/* DDR controller or DMA? */
 #define CONFIG_MEM_INIT_VALUE	0xDeadBeef
 
-#define CFG_DDR_SDRAM_BASE	0x00000000
-#define CFG_SDRAM_BASE		CFG_DDR_SDRAM_BASE
+#define CONFIG_SYS_DDR_SDRAM_BASE	0x00000000
+#define CONFIG_SYS_SDRAM_BASE		CONFIG_SYS_DDR_SDRAM_BASE
 #define CONFIG_VERY_BIG_RAM
 
 #define CONFIG_NUM_DDR_CONTROLLERS	1
@@ -128,69 +127,68 @@
 #undef CONFIG_CLOCKS_IN_MHZ
 
 #if defined(CONFIG_RAM_AS_FLASH)
-  #define CFG_LBC_SDRAM_BASE	0xfc000000	/* Localbus SDRAM */
-  #define CFG_FLASH_BASE	0xf8000000      /* start of FLASH 8M  */
-  #define CFG_BR0_PRELIM	0xf8000801      /* port size 8bit */
-  #define CFG_OR0_PRELIM	0xf8000ff7	/* 8MB Flash		*/
+  #define CONFIG_SYS_LBC_SDRAM_BASE	0xfc000000	/* Localbus SDRAM */
+  #define CONFIG_SYS_FLASH_BASE	0xf8000000      /* start of FLASH 8M  */
+  #define CONFIG_SYS_BR0_PRELIM	0xf8000801      /* port size 8bit */
+  #define CONFIG_SYS_OR0_PRELIM	0xf8000ff7	/* 8MB Flash		*/
 #else /* Boot from real Flash */
-  #define CFG_LBC_SDRAM_BASE	0xf8000000	/* Localbus SDRAM */
-  #define CFG_FLASH_BASE	0xff800000      /* start of FLASH 8M    */
-  #define CFG_BR0_PRELIM	0xff800801      /* port size 8bit      */
-  #define CFG_OR0_PRELIM	0xff800ff7	/* 8MB Flash		*/
+  #define CONFIG_SYS_LBC_SDRAM_BASE	0xf8000000	/* Localbus SDRAM */
+  #define CONFIG_SYS_FLASH_BASE	0xff800000      /* start of FLASH 8M    */
+  #define CONFIG_SYS_BR0_PRELIM	0xff800801      /* port size 8bit      */
+  #define CONFIG_SYS_OR0_PRELIM	0xff800ff7	/* 8MB Flash		*/
 #endif
-#define CFG_LBC_SDRAM_SIZE	64		/* LBC SDRAM is 64MB	*/
+#define CONFIG_SYS_LBC_SDRAM_SIZE	64		/* LBC SDRAM is 64MB	*/
 
 /* local bus definitions */
-#define CFG_BR1_PRELIM		0xe4001801	/* 64M, 32-bit flash */
-#define CFG_OR1_PRELIM		0xfc000ff7
+#define CONFIG_SYS_BR1_PRELIM		0xe4001801	/* 64M, 32-bit flash */
+#define CONFIG_SYS_OR1_PRELIM		0xfc000ff7
 
-#define CFG_BR2_PRELIM		0x00000000	/* CS2 not used */
-#define CFG_OR2_PRELIM		0x00000000
+#define CONFIG_SYS_BR2_PRELIM		0x00000000	/* CS2 not used */
+#define CONFIG_SYS_OR2_PRELIM		0x00000000
 
-#define CFG_BR3_PRELIM		0xf0001861	/* 64MB localbus SDRAM	*/
-#define CFG_OR3_PRELIM		0xfc000cc1
+#define CONFIG_SYS_BR3_PRELIM		0xf0001861	/* 64MB localbus SDRAM	*/
+#define CONFIG_SYS_OR3_PRELIM		0xfc000cc1
 
 #if defined(CONFIG_RAM_AS_FLASH)
-  #define CFG_BR4_PRELIM	0xf4001861	/* 64M localbus SDRAM */
+  #define CONFIG_SYS_BR4_PRELIM	0xf4001861	/* 64M localbus SDRAM */
 #else
-  #define CFG_BR4_PRELIM	0xf8001861	/* 64M localbus SDRAM */
+  #define CONFIG_SYS_BR4_PRELIM	0xf8001861	/* 64M localbus SDRAM */
 #endif
-#define CFG_OR4_PRELIM		0xfc000cc1
+#define CONFIG_SYS_OR4_PRELIM		0xfc000cc1
 
-#define CFG_BR5_PRELIM		0xfc000801	/* 16M CS5 misc devices */
+#define CONFIG_SYS_BR5_PRELIM		0xfc000801	/* 16M CS5 misc devices */
 #if 1
-  #define CFG_OR5_PRELIM	0xff000ff7
+  #define CONFIG_SYS_OR5_PRELIM	0xff000ff7
 #else
-  #define CFG_OR5_PRELIM	0xff0000f0
+  #define CONFIG_SYS_OR5_PRELIM	0xff0000f0
 #endif
 
-#define CFG_BR6_PRELIM		0xe0001801	/* 64M, 32-bit flash */
-#define CFG_OR6_PRELIM		0xfc000ff7
-#define CFG_LBC_LCRR		0x00030002	/* local bus freq	*/
-#define CFG_LBC_LBCR		0x00000000
-#define CFG_LBC_LSRT		0x20000000
-#define CFG_LBC_MRTPR		0x20000000
-#define CFG_LBC_LSDMR_1		0x2861b723
-#define CFG_LBC_LSDMR_2		0x0861b723
-#define CFG_LBC_LSDMR_3		0x0861b723
-#define CFG_LBC_LSDMR_4		0x1861b723
-#define CFG_LBC_LSDMR_5		0x4061b723
+#define CONFIG_SYS_BR6_PRELIM		0xe0001801	/* 64M, 32-bit flash */
+#define CONFIG_SYS_OR6_PRELIM		0xfc000ff7
+#define CONFIG_SYS_LBC_LCRR		0x00030002	/* local bus freq	*/
+#define CONFIG_SYS_LBC_LBCR		0x00000000
+#define CONFIG_SYS_LBC_LSRT		0x20000000
+#define CONFIG_SYS_LBC_MRTPR		0x20000000
+#define CONFIG_SYS_LBC_LSDMR_1		0x2861b723
+#define CONFIG_SYS_LBC_LSDMR_2		0x0861b723
+#define CONFIG_SYS_LBC_LSDMR_3		0x0861b723
+#define CONFIG_SYS_LBC_LSDMR_4		0x1861b723
+#define CONFIG_SYS_LBC_LSDMR_5		0x4061b723
 
 /* just hijack the MOT BCSR def for SBC8560 misc devices */
-#define CFG_BCSR		((CFG_BR5_PRELIM & 0xff000000)|0x00400000)
+#define CONFIG_SYS_BCSR		((CONFIG_SYS_BR5_PRELIM & 0xff000000)|0x00400000)
 /* the size of CS5 needs to be >= 16M for TLB and LAW setups */
 
-#define CONFIG_L1_INIT_RAM
-#define CFG_INIT_RAM_LOCK	1
-#define CFG_INIT_RAM_ADDR	0x70000000	/* Initial RAM address	*/
-#define CFG_INIT_RAM_END	0x4000		/* End of used area in RAM */
+#define CONFIG_SYS_INIT_RAM_LOCK	1
+#define CONFIG_SYS_INIT_RAM_ADDR	0x70000000	/* Initial RAM address	*/
+#define CONFIG_SYS_INIT_RAM_END	0x4000		/* End of used area in RAM */
 
-#define CFG_GBL_DATA_SIZE	128		/* num bytes initial data */
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_GBL_DATA_SIZE	128		/* num bytes initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
-#define CFG_MONITOR_LEN		(256 * 1024)	/* Reserve 256 kB for Mon */
-#define CFG_MALLOC_LEN		(128 * 1024)	/* Reserved for malloc */
+#define CONFIG_SYS_MONITOR_LEN		(256 * 1024)	/* Reserve 256 kB for Mon */
+#define CONFIG_SYS_MALLOC_LEN		(128 * 1024)	/* Reserved for malloc */
 
 /* Serial Port */
 #undef  CONFIG_CONS_ON_SCC	/* define if console on SCC */
@@ -198,22 +196,22 @@
 
 #define CONFIG_CONS_INDEX	1
 #undef	CONFIG_SERIAL_SOFTWARE_FIFO
-#define CFG_NS16550
-#define CFG_NS16550_SERIAL
-#define CFG_NS16550_REG_SIZE	1
-#define CFG_NS16550_CLK		1843200 /* get_bus_freq(0) */
+#define CONFIG_SYS_NS16550
+#define CONFIG_SYS_NS16550_SERIAL
+#define CONFIG_SYS_NS16550_REG_SIZE	1
+#define CONFIG_SYS_NS16550_CLK		1843200 /* get_bus_freq(0) */
 #define CONFIG_BAUDRATE		9600
 
-#define CFG_BAUDRATE_TABLE  \
+#define CONFIG_SYS_BAUDRATE_TABLE  \
 	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200}
 
-#define CFG_NS16550_COM1	((CFG_BR5_PRELIM & 0xff000000)+0x00700000)
-#define CFG_NS16550_COM2	((CFG_BR5_PRELIM & 0xff000000)+0x00800000)
+#define CONFIG_SYS_NS16550_COM1	((CONFIG_SYS_BR5_PRELIM & 0xff000000)+0x00700000)
+#define CONFIG_SYS_NS16550_COM2	((CONFIG_SYS_BR5_PRELIM & 0xff000000)+0x00800000)
 
 /* Use the HUSH parser */
-#define CFG_HUSH_PARSER
-#ifdef	CFG_HUSH_PARSER
-#define CFG_PROMPT_HUSH_PS2 "> "
+#define CONFIG_SYS_HUSH_PARSER
+#ifdef	CONFIG_SYS_HUSH_PARSER
+#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
 #endif
 
 /* pass open firmware flat tree */
@@ -227,14 +225,14 @@
 #define CONFIG_FSL_I2C		/* Use FSL common I2C driver */
 #define CONFIG_HARD_I2C		/* I2C with hardware support*/
 #undef	CONFIG_SOFT_I2C			/* I2C bit-banged */
-#define CFG_I2C_SPEED		400000	/* I2C speed and slave address	*/
-#define CFG_I2C_SLAVE		0x7F
-#define CFG_I2C_NOPROBES	{0x69}	/* Don't probe these addrs */
-#define CFG_I2C_OFFSET		0x3000
+#define CONFIG_SYS_I2C_SPEED		400000	/* I2C speed and slave address	*/
+#define CONFIG_SYS_I2C_SLAVE		0x7F
+#define CONFIG_SYS_I2C_NOPROBES	{0x69}	/* Don't probe these addrs */
+#define CONFIG_SYS_I2C_OFFSET		0x3000
 
-#define CFG_PCI_MEM_BASE	0xC0000000
-#define CFG_PCI_MEM_PHYS	0xC0000000
-#define CFG_PCI_MEM_SIZE	0x10000000
+#define CONFIG_SYS_PCI_MEM_BASE	0xC0000000
+#define CONFIG_SYS_PCI_MEM_PHYS	0xC0000000
+#define CONFIG_SYS_PCI_MEM_SIZE	0x10000000
 
 #ifdef CONFIG_TSEC_ENET
 
@@ -272,10 +270,10 @@
      * - Select bus for bd/buffers
      * - Full duplex
      */
-    #define CFG_CMXFCR_MASK	(CMXFCR_FC2 | CMXFCR_RF2CS_MSK | CMXFCR_TF2CS_MSK)
-    #define CFG_CMXFCR_VALUE	(CMXFCR_RF2CS_CLK13 | CMXFCR_TF2CS_CLK14)
-    #define CFG_CPMFCR_RAMTYPE	0
-    #define CFG_FCC_PSMR	(FCC_PSMR_FDE)
+    #define CONFIG_SYS_CMXFCR_MASK	(CMXFCR_FC2 | CMXFCR_RF2CS_MSK | CMXFCR_TF2CS_MSK)
+    #define CONFIG_SYS_CMXFCR_VALUE	(CMXFCR_RF2CS_CLK13 | CMXFCR_TF2CS_CLK14)
+    #define CONFIG_SYS_CPMFCR_RAMTYPE	0
+    #define CONFIG_SYS_FCC_PSMR	(FCC_PSMR_FDE)
 
   #elif (CONFIG_ETHER_INDEX == 3)
     /* need more definitions here for FE3 */
@@ -305,47 +303,47 @@
  * FLASH and environment organization
  */
 
-#define CFG_FLASH_CFI		1	/* Flash is CFI conformant	*/
+#define CONFIG_SYS_FLASH_CFI		1	/* Flash is CFI conformant	*/
 #define CONFIG_FLASH_CFI_DRIVER	1	/* Use the common driver	*/
 #if 0
-#define CFG_FLASH_USE_BUFFER_WRITE 1    /* use buffered writes (20x faster)   */
-#define CFG_FLASH_PROTECTION		/* use hardware protection	*/
+#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1    /* use buffered writes (20x faster)   */
+#define CONFIG_SYS_FLASH_PROTECTION		/* use hardware protection	*/
 #endif
-#define CFG_MAX_FLASH_SECT	64	/* max number of sectors on one chip */
-#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks	*/
+#define CONFIG_SYS_MAX_FLASH_SECT	64	/* max number of sectors on one chip */
+#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks	*/
 
-#undef	CFG_FLASH_CHECKSUM
-#define CFG_FLASH_ERASE_TOUT	200000	/* Timeout for Flash Erase (in ms) */
-#define CFG_FLASH_WRITE_TOUT	50000	/* Timeout for Flash Write (in ms) */
+#undef	CONFIG_SYS_FLASH_CHECKSUM
+#define CONFIG_SYS_FLASH_ERASE_TOUT	200000	/* Timeout for Flash Erase (in ms) */
+#define CONFIG_SYS_FLASH_WRITE_TOUT	50000	/* Timeout for Flash Write (in ms) */
 
-#define CFG_MONITOR_BASE	TEXT_BASE /* start of monitor	*/
+#define CONFIG_SYS_MONITOR_BASE	TEXT_BASE /* start of monitor	*/
 
 #if 0
 /* XXX This doesn't work and I don't want to fix it */
-#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
-  #define CFG_RAMBOOT
+#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
+  #define CONFIG_SYS_RAMBOOT
 #else
-  #undef  CFG_RAMBOOT
+  #undef  CONFIG_SYS_RAMBOOT
 #endif
 #endif
 
 /* Environment */
-#if !defined(CFG_RAMBOOT)
+#if !defined(CONFIG_SYS_RAMBOOT)
   #if defined(CONFIG_RAM_AS_FLASH)
-    #define CFG_ENV_IS_NOWHERE
-    #define CFG_ENV_ADDR	(CFG_FLASH_BASE + 0x100000)
-    #define CFG_ENV_SIZE	0x2000
+    #define CONFIG_ENV_IS_NOWHERE
+    #define CONFIG_ENV_ADDR	(CONFIG_SYS_FLASH_BASE + 0x100000)
+    #define CONFIG_ENV_SIZE	0x2000
   #else
-    #define CFG_ENV_IS_IN_FLASH	1
-    #define CFG_ENV_SECT_SIZE	0x20000 /* 128K(one sector) for env */
-    #define CFG_ENV_ADDR	(CFG_MONITOR_BASE - CFG_ENV_SECT_SIZE)
-    #define CFG_ENV_SIZE	0x2000 /* CFG_ENV_SECT_SIZE */
+    #define CONFIG_ENV_IS_IN_FLASH	1
+    #define CONFIG_ENV_SECT_SIZE	0x20000 /* 128K(one sector) for env */
+    #define CONFIG_ENV_ADDR	(CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
+    #define CONFIG_ENV_SIZE	0x2000 /* CONFIG_ENV_SECT_SIZE */
   #endif
 #else
-  #define CFG_NO_FLASH		1	/* Flash is not usable now	*/
-  #define CFG_ENV_IS_NOWHERE	1	/* Store ENV in memory only	*/
-  #define CFG_ENV_ADDR		(CFG_MONITOR_BASE - 0x1000)
-  #define CFG_ENV_SIZE		0x2000
+  #define CONFIG_SYS_NO_FLASH		1	/* Flash is not usable now	*/
+  #define CONFIG_ENV_IS_NOWHERE	1	/* Store ENV in memory only	*/
+  #define CONFIG_ENV_ADDR		(CONFIG_SYS_MONITOR_BASE - 0x1000)
+  #define CONFIG_ENV_SIZE		0x2000
 #endif
 
 #define CONFIG_BOOTARGS "root=/dev/nfs rw ip=dhcp console=ttyS0,9600"
@@ -353,7 +351,7 @@
 #define CONFIG_BOOTDELAY	5	/* -1 disable autoboot */
 
 #define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
-#define CFG_LOADS_BAUD_CHANGE	1	/* allow baudrate change	*/
+#define CONFIG_SYS_LOADS_BAUD_CHANGE	1	/* allow baudrate change	*/
 
 
 /*
@@ -381,7 +379,7 @@
     #define CONFIG_CMD_MII
 #endif
 
-#if defined(CFG_RAMBOOT) || defined(CONFIG_RAM_AS_FLASH)
+#if defined(CONFIG_SYS_RAMBOOT) || defined(CONFIG_RAM_AS_FLASH)
     #undef CONFIG_CMD_ENV
     #undef CONFIG_CMD_LOADS
 #endif
@@ -392,25 +390,25 @@
 /*
  * Miscellaneous configurable options
  */
-#define CFG_LONGHELP			/* undef to save memory		*/
-#define CFG_PROMPT	"SBC8560=> " /* Monitor Command Prompt	*/
+#define CONFIG_SYS_LONGHELP			/* undef to save memory		*/
+#define CONFIG_SYS_PROMPT	"SBC8560=> " /* Monitor Command Prompt	*/
 #if defined(CONFIG_CMD_KGDB)
-  #define CFG_CBSIZE	1024		/* Console I/O Buffer Size	*/
+  #define CONFIG_SYS_CBSIZE	1024		/* Console I/O Buffer Size	*/
 #else
-  #define CFG_CBSIZE	256		/* Console I/O Buffer Size	*/
+  #define CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size	*/
 #endif
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define CFG_MAXARGS	16		/* max number of command args	*/
-#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size	*/
-#define CFG_LOAD_ADDR	0x1000000	/* default load address */
-#define CFG_HZ		1000		/* decrementer freq: 1 ms ticks */
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS	16		/* max number of command args	*/
+#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
+#define CONFIG_SYS_LOAD_ADDR	0x1000000	/* default load address */
+#define CONFIG_SYS_HZ		1000		/* decrementer freq: 1 ms ticks */
 
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define CFG_BOOTMAPSZ		(8 << 20) /* Initial Memory map for Linux */
+#define CONFIG_SYS_BOOTMAPSZ		(8 << 20) /* Initial Memory map for Linux */
 
 /*
  * Internal Definitions
diff --git a/include/configs/sbc8641d.h b/include/configs/sbc8641d.h
index ddca527c4..001294575 100644
--- a/include/configs/sbc8641d.h
+++ b/include/configs/sbc8641d.h
@@ -44,10 +44,16 @@
 #define CONFIG_LINUX_RESET_VEC  0x100   /* Reset vector used by Linux */
 
 #ifdef RUN_DIAG
-#define CFG_DIAG_ADDR        0xff800000
+#define CONFIG_SYS_DIAG_ADDR        0xff800000
 #endif
 
-#define CFG_RESET_ADDRESS    0xfff00100
+#define CONFIG_SYS_RESET_ADDRESS    0xfff00100
+
+/*
+ * virtual address to be used for temporary mappings.  There
+ * should be 128k free at this VA.
+ */
+#define CONFIG_SYS_SCRATCH_VA	0xe8000000
 
 #define CONFIG_PCI		1	/* Enable PCIE */
 #define CONFIG_PCI1		1	/* PCIE controler 1 (slot 1) */
@@ -76,7 +82,7 @@
 /*
  * L2CR setup -- make sure this is right for your board!
  */
-#define CFG_L2
+#define CONFIG_SYS_L2
 #define L2_INIT		0
 #define L2_ENABLE	(L2CR_L2E)
 
@@ -86,28 +92,32 @@
 
 #define CONFIG_BOARD_EARLY_INIT_F	1	/* Call board_pre_init */
 
-#undef	CFG_DRAM_TEST				/* memory test, takes time */
-#define CFG_MEMTEST_START	0x00200000	/* memtest region */
-#define CFG_MEMTEST_END		0x00400000
+#undef	CONFIG_SYS_DRAM_TEST				/* memory test, takes time */
+#define CONFIG_SYS_MEMTEST_START	0x00200000	/* memtest region */
+#define CONFIG_SYS_MEMTEST_END		0x00400000
 
 /*
  * Base addresses -- Note these are effective addresses where the
  * actual resources get mapped (not physical addresses)
  */
-#define CFG_CCSRBAR_DEFAULT	0xff700000	/* CCSRBAR Default */
-#define CFG_CCSRBAR		0xf8000000	/* relocated CCSRBAR */
-#define CFG_IMMR		CFG_CCSRBAR	/* PQII uses CFG_IMMR */
+#define CONFIG_SYS_CCSRBAR_DEFAULT	0xff700000	/* CCSRBAR Default */
+#define CONFIG_SYS_CCSRBAR		0xf8000000	/* relocated CCSRBAR */
+#define CONFIG_SYS_IMMR		CONFIG_SYS_CCSRBAR	/* PQII uses CONFIG_SYS_IMMR */
 
-#define CFG_PCI1_ADDR		(CFG_CCSRBAR+0x8000)
-#define CFG_PCI2_ADDR		(CFG_CCSRBAR+0x9000)
+#define CONFIG_SYS_CCSRBAR_PHYS_LOW	CONFIG_SYS_CCSRBAR
+#define CONFIG_SYS_CCSRBAR_PHYS_HIGH	0x0
+
+#define CONFIG_SYS_PCI1_ADDR		(CONFIG_SYS_CCSRBAR+0x8000)
+#define CONFIG_SYS_PCI2_ADDR		(CONFIG_SYS_CCSRBAR+0x9000)
 
 /*
  * DDR Setup
  */
-#define CFG_DDR_SDRAM_BASE	0x00000000	/* DDR is system memory */
-#define CFG_DDR_SDRAM_BASE2	0x10000000	/* DDR bank 2 */
-#define CFG_SDRAM_BASE		CFG_DDR_SDRAM_BASE
-#define CFG_SDRAM_BASE2		CFG_DDR_SDRAM_BASE2
+#define CONFIG_SYS_DDR_SDRAM_BASE	0x00000000	/* DDR is system memory */
+#define CONFIG_SYS_DDR_SDRAM_BASE2	0x10000000	/* DDR bank 2 */
+#define CONFIG_SYS_SDRAM_BASE		CONFIG_SYS_DDR_SDRAM_BASE
+#define CONFIG_SYS_SDRAM_BASE2		CONFIG_SYS_DDR_SDRAM_BASE2
+#define CONFIG_SYS_MAX_DDR_BAT_SIZE	0x80000000	/* BAT mapping size */
 #define CONFIG_VERY_BIG_RAM
 
 #define MPC86xx_DDR_SDRAM_CLK_CNTL
@@ -130,143 +140,143 @@
      * Manually set up DDR1 & DDR2 parameters
      */
 
-    #define CFG_SDRAM_SIZE	512		/* DDR is 512MB */
-
-    #define CFG_DDR_CS0_BNDS	0x0000000F
-    #define CFG_DDR_CS1_BNDS	0x00000000
-    #define CFG_DDR_CS2_BNDS	0x00000000
-    #define CFG_DDR_CS3_BNDS	0x00000000
-    #define CFG_DDR_CS0_CONFIG	0x80010102
-    #define CFG_DDR_CS1_CONFIG	0x00000000
-    #define CFG_DDR_CS2_CONFIG	0x00000000
-    #define CFG_DDR_CS3_CONFIG	0x00000000
-    #define CFG_DDR_TIMING_3 0x00000000
-    #define CFG_DDR_TIMING_0	0x00220802
-    #define CFG_DDR_TIMING_1	0x38377322
-    #define CFG_DDR_TIMING_2	0x002040c7
-    #define CFG_DDR_CFG_1A	0x43008008
-    #define CFG_DDR_CFG_2	0x24401000
-    #define CFG_DDR_MODE_1	0x23c00542
-    #define CFG_DDR_MODE_2	0x00000000
-    #define CFG_DDR_MODE_CTL	0x00000000
-    #define CFG_DDR_INTERVAL	0x05080100
-    #define CFG_DDR_DATA_INIT	0x00000000
-    #define CFG_DDR_CLK_CTRL	0x03800000
-    #define CFG_DDR_CFG_1B	0xC3008008
-
-    #define CFG_DDR2_CS0_BNDS	0x0010001F
-    #define CFG_DDR2_CS1_BNDS	0x00000000
-    #define CFG_DDR2_CS2_BNDS	0x00000000
-    #define CFG_DDR2_CS3_BNDS	0x00000000
-    #define CFG_DDR2_CS0_CONFIG	0x80010102
-    #define CFG_DDR2_CS1_CONFIG	0x00000000
-    #define CFG_DDR2_CS2_CONFIG	0x00000000
-    #define CFG_DDR2_CS3_CONFIG	0x00000000
-    #define CFG_DDR2_EXT_REFRESH 0x00000000
-    #define CFG_DDR2_TIMING_0	0x00220802
-    #define CFG_DDR2_TIMING_1	0x38377322
-    #define CFG_DDR2_TIMING_2	0x002040c7
-    #define CFG_DDR2_CFG_1A	0x43008008
-    #define CFG_DDR2_CFG_2	0x24401000
-    #define CFG_DDR2_MODE_1	0x23c00542
-    #define CFG_DDR2_MODE_2	0x00000000
-    #define CFG_DDR2_MODE_CTL	0x00000000
-    #define CFG_DDR2_INTERVAL	0x05080100
-    #define CFG_DDR2_DATA_INIT	0x00000000
-    #define CFG_DDR2_CLK_CTRL	0x03800000
-    #define CFG_DDR2_CFG_1B	0xC3008008
+    #define CONFIG_SYS_SDRAM_SIZE	512		/* DDR is 512MB */
+
+    #define CONFIG_SYS_DDR_CS0_BNDS	0x0000000F
+    #define CONFIG_SYS_DDR_CS1_BNDS	0x00000000
+    #define CONFIG_SYS_DDR_CS2_BNDS	0x00000000
+    #define CONFIG_SYS_DDR_CS3_BNDS	0x00000000
+    #define CONFIG_SYS_DDR_CS0_CONFIG	0x80010102
+    #define CONFIG_SYS_DDR_CS1_CONFIG	0x00000000
+    #define CONFIG_SYS_DDR_CS2_CONFIG	0x00000000
+    #define CONFIG_SYS_DDR_CS3_CONFIG	0x00000000
+    #define CONFIG_SYS_DDR_TIMING_3 0x00000000
+    #define CONFIG_SYS_DDR_TIMING_0	0x00220802
+    #define CONFIG_SYS_DDR_TIMING_1	0x38377322
+    #define CONFIG_SYS_DDR_TIMING_2	0x002040c7
+    #define CONFIG_SYS_DDR_CFG_1A	0x43008008
+    #define CONFIG_SYS_DDR_CFG_2	0x24401000
+    #define CONFIG_SYS_DDR_MODE_1	0x23c00542
+    #define CONFIG_SYS_DDR_MODE_2	0x00000000
+    #define CONFIG_SYS_DDR_MODE_CTL	0x00000000
+    #define CONFIG_SYS_DDR_INTERVAL	0x05080100
+    #define CONFIG_SYS_DDR_DATA_INIT	0x00000000
+    #define CONFIG_SYS_DDR_CLK_CTRL	0x03800000
+    #define CONFIG_SYS_DDR_CFG_1B	0xC3008008
+
+    #define CONFIG_SYS_DDR2_CS0_BNDS	0x0010001F
+    #define CONFIG_SYS_DDR2_CS1_BNDS	0x00000000
+    #define CONFIG_SYS_DDR2_CS2_BNDS	0x00000000
+    #define CONFIG_SYS_DDR2_CS3_BNDS	0x00000000
+    #define CONFIG_SYS_DDR2_CS0_CONFIG	0x80010102
+    #define CONFIG_SYS_DDR2_CS1_CONFIG	0x00000000
+    #define CONFIG_SYS_DDR2_CS2_CONFIG	0x00000000
+    #define CONFIG_SYS_DDR2_CS3_CONFIG	0x00000000
+    #define CONFIG_SYS_DDR2_EXT_REFRESH 0x00000000
+    #define CONFIG_SYS_DDR2_TIMING_0	0x00220802
+    #define CONFIG_SYS_DDR2_TIMING_1	0x38377322
+    #define CONFIG_SYS_DDR2_TIMING_2	0x002040c7
+    #define CONFIG_SYS_DDR2_CFG_1A	0x43008008
+    #define CONFIG_SYS_DDR2_CFG_2	0x24401000
+    #define CONFIG_SYS_DDR2_MODE_1	0x23c00542
+    #define CONFIG_SYS_DDR2_MODE_2	0x00000000
+    #define CONFIG_SYS_DDR2_MODE_CTL	0x00000000
+    #define CONFIG_SYS_DDR2_INTERVAL	0x05080100
+    #define CONFIG_SYS_DDR2_DATA_INIT	0x00000000
+    #define CONFIG_SYS_DDR2_CLK_CTRL	0x03800000
+    #define CONFIG_SYS_DDR2_CFG_1B	0xC3008008
 
 
 #endif
 
-/* #define CFG_ID_EEPROM	1
+/* #define CONFIG_ID_EEPROM	1
 #define ID_EEPROM_ADDR 0x57 */
 
 /*
  * The SBC8641D contains 16MB flash space at ff000000.
  */
-#define CFG_FLASH_BASE      0xff000000  /* start of FLASH 16M */
+#define CONFIG_SYS_FLASH_BASE      0xff000000  /* start of FLASH 16M */
 
 /* Flash */
-#define CFG_BR0_PRELIM		0xff001001	/* port size 16bit */
-#define CFG_OR0_PRELIM		0xff006e65	/* 16MB Boot Flash area */
+#define CONFIG_SYS_BR0_PRELIM		0xff001001	/* port size 16bit */
+#define CONFIG_SYS_OR0_PRELIM		0xff006e65	/* 16MB Boot Flash area */
 
 /* 64KB EEPROM */
-#define CFG_BR1_PRELIM		0xf0000801	/* port size 16bit */
-#define CFG_OR1_PRELIM		0xffff6e65	/* 64K EEPROM area */
+#define CONFIG_SYS_BR1_PRELIM		0xf0000801	/* port size 16bit */
+#define CONFIG_SYS_OR1_PRELIM		0xffff6e65	/* 64K EEPROM area */
 
 /* EPLD - User switches, board id, LEDs */
-#define CFG_BR2_PRELIM		0xf1000801	/* port size 16bit */
-#define CFG_OR2_PRELIM		0xfff06e65	/* EPLD (switches, board ID, LEDs) area */
+#define CONFIG_SYS_BR2_PRELIM		0xf1000801	/* port size 16bit */
+#define CONFIG_SYS_OR2_PRELIM		0xfff06e65	/* EPLD (switches, board ID, LEDs) area */
 
 /* Local bus SDRAM 128MB */
-#define CFG_BR3_PRELIM		0xe0001861	/* port size ?bit */
-#define CFG_OR3_PRELIM		0xfc006cc0	/* 128MB local bus SDRAM area (1st half) */
-#define CFG_BR4_PRELIM		0xe4001861	/* port size ?bit */
-#define CFG_OR4_PRELIM		0xfc006cc0	/* 128MB local bus SDRAM area (2nd half) */
+#define CONFIG_SYS_BR3_PRELIM		0xe0001861	/* port size ?bit */
+#define CONFIG_SYS_OR3_PRELIM		0xfc006cc0	/* 128MB local bus SDRAM area (1st half) */
+#define CONFIG_SYS_BR4_PRELIM		0xe4001861	/* port size ?bit */
+#define CONFIG_SYS_OR4_PRELIM		0xfc006cc0	/* 128MB local bus SDRAM area (2nd half) */
 
 /* Disk on Chip (DOC) 128MB */
-#define CFG_BR5_PRELIM		0xe8001001	/* port size ?bit */
-#define CFG_OR5_PRELIM		0xf8006e65	/* 128MB local bus SDRAM area (2nd half) */
+#define CONFIG_SYS_BR5_PRELIM		0xe8001001	/* port size ?bit */
+#define CONFIG_SYS_OR5_PRELIM		0xf8006e65	/* 128MB local bus SDRAM area (2nd half) */
 
 /* LCD */
-#define CFG_BR6_PRELIM		0xf4000801	/* port size ?bit */
-#define CFG_OR6_PRELIM		0xfff06e65	/* 128MB local bus SDRAM area (2nd half) */
+#define CONFIG_SYS_BR6_PRELIM		0xf4000801	/* port size ?bit */
+#define CONFIG_SYS_OR6_PRELIM		0xfff06e65	/* 128MB local bus SDRAM area (2nd half) */
 
 /* Control logic & misc peripherals */
-#define CFG_BR7_PRELIM		0xf2000801	/* port size ?bit */
-#define CFG_OR7_PRELIM		0xfff06e65	/* 128MB local bus SDRAM area (2nd half) */
+#define CONFIG_SYS_BR7_PRELIM		0xf2000801	/* port size ?bit */
+#define CONFIG_SYS_OR7_PRELIM		0xfff06e65	/* 128MB local bus SDRAM area (2nd half) */
 
-#define CFG_MAX_FLASH_BANKS	1		/* number of banks */
-#define CFG_MAX_FLASH_SECT	131		/* sectors per device */
+#define CONFIG_SYS_MAX_FLASH_BANKS	1		/* number of banks */
+#define CONFIG_SYS_MAX_FLASH_SECT	131		/* sectors per device */
 
-#undef	CFG_FLASH_CHECKSUM
-#define CFG_FLASH_ERASE_TOUT	60000	/* Flash Erase Timeout (ms) */
-#define CFG_FLASH_WRITE_TOUT	500	/* Flash Write Timeout (ms) */
-#define CFG_MONITOR_BASE	TEXT_BASE	/* start of monitor */
+#undef	CONFIG_SYS_FLASH_CHECKSUM
+#define CONFIG_SYS_FLASH_ERASE_TOUT	60000	/* Flash Erase Timeout (ms) */
+#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Flash Write Timeout (ms) */
+#define CONFIG_SYS_MONITOR_BASE	TEXT_BASE	/* start of monitor */
+#define CONFIG_SYS_MONITOR_BASE_EARLY   0xfff00000	/* early monitor loc */
 
 #define CONFIG_FLASH_CFI_DRIVER
-#define CFG_FLASH_CFI
-#define CFG_WRITE_SWAPPED_DATA
-#define CFG_FLASH_EMPTY_INFO
-#define CFG_FLASH_PROTECTION
+#define CONFIG_SYS_FLASH_CFI
+#define CONFIG_SYS_WRITE_SWAPPED_DATA
+#define CONFIG_SYS_FLASH_EMPTY_INFO
+#define CONFIG_SYS_FLASH_PROTECTION
 
 #undef CONFIG_CLOCKS_IN_MHZ
 
-#define CONFIG_L1_INIT_RAM
-#define CFG_INIT_RAM_LOCK	1
-#ifndef CFG_INIT_RAM_LOCK
-#define CFG_INIT_RAM_ADDR	0x0fd00000	/* Initial RAM address */
+#define CONFIG_SYS_INIT_RAM_LOCK	1
+#ifndef CONFIG_SYS_INIT_RAM_LOCK
+#define CONFIG_SYS_INIT_RAM_ADDR	0x0fd00000	/* Initial RAM address */
 #else
-#define CFG_INIT_RAM_ADDR	0xf8400000	/* Initial RAM address */
+#define CONFIG_SYS_INIT_RAM_ADDR	0xf8400000	/* Initial RAM address */
 #endif
-#define CFG_INIT_RAM_END	0x4000		/* End of used area in RAM */
+#define CONFIG_SYS_INIT_RAM_END	0x4000		/* End of used area in RAM */
 
-#define CFG_GBL_DATA_SIZE	128		/* num bytes initial data */
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_GBL_DATA_SIZE	128		/* num bytes initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
-#define CFG_MONITOR_LEN		(256 * 1024)    /* Reserve 256 kB for Mon */
-#define CFG_MALLOC_LEN		(128 * 1024)    /* Reserved for malloc */
+#define CONFIG_SYS_MONITOR_LEN		(256 * 1024)    /* Reserve 256 kB for Mon */
+#define CONFIG_SYS_MALLOC_LEN		(128 * 1024)    /* Reserved for malloc */
 
 /* Serial Port */
 #define CONFIG_CONS_INDEX     1
 #undef	CONFIG_SERIAL_SOFTWARE_FIFO
-#define CFG_NS16550
-#define CFG_NS16550_SERIAL
-#define CFG_NS16550_REG_SIZE    1
-#define CFG_NS16550_CLK		get_bus_freq(0)
+#define CONFIG_SYS_NS16550
+#define CONFIG_SYS_NS16550_SERIAL
+#define CONFIG_SYS_NS16550_REG_SIZE    1
+#define CONFIG_SYS_NS16550_CLK		get_bus_freq(0)
 
-#define CFG_BAUDRATE_TABLE  \
+#define CONFIG_SYS_BAUDRATE_TABLE  \
 	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200}
 
-#define CFG_NS16550_COM1        (CFG_CCSRBAR+0x4500)
-#define CFG_NS16550_COM2        (CFG_CCSRBAR+0x4600)
+#define CONFIG_SYS_NS16550_COM1        (CONFIG_SYS_CCSRBAR+0x4500)
+#define CONFIG_SYS_NS16550_COM2        (CONFIG_SYS_CCSRBAR+0x4600)
 
 /* Use the HUSH parser */
-#define CFG_HUSH_PARSER
-#ifdef  CFG_HUSH_PARSER
-#define CFG_PROMPT_HUSH_PS2 "> "
+#define CONFIG_SYS_HUSH_PARSER
+#ifdef  CONFIG_SYS_HUSH_PARSER
+#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
 #endif
 
 /*
@@ -276,8 +286,8 @@
 #define CONFIG_OF_BOARD_SETUP		1
 #define CONFIG_OF_STDOUT_VIA_ALIAS	1
 
-#define CFG_64BIT_VSPRINTF	1
-#define CFG_64BIT_STRTOUL	1
+#define CONFIG_SYS_64BIT_VSPRINTF	1
+#define CONFIG_SYS_64BIT_STRTOUL	1
 
 /*
  * I2C
@@ -285,46 +295,41 @@
 #define	CONFIG_FSL_I2C		/* Use FSL common I2C driver */
 #define	CONFIG_HARD_I2C		/* I2C with hardware support*/
 #undef	CONFIG_SOFT_I2C			/* I2C bit-banged */
-#define CFG_I2C_SPEED		400000	/* I2C speed and slave address */
-#define CFG_I2C_SLAVE		0x7F
-#define CFG_I2C_NOPROBES        {0x69}	/* Don't probe these addrs */
-#define CFG_I2C_OFFSET		0x3100
+#define CONFIG_SYS_I2C_SPEED		400000	/* I2C speed and slave address */
+#define CONFIG_SYS_I2C_SLAVE		0x7F
+#define CONFIG_SYS_I2C_NOPROBES        {0x69}	/* Don't probe these addrs */
+#define CONFIG_SYS_I2C_OFFSET		0x3100
 
 /*
  * RapidIO MMU
  */
-#define CFG_RIO_MEM_BASE	0xc0000000	/* base address */
-#define CFG_RIO_MEM_PHYS	CFG_RIO_MEM_BASE
-#define CFG_RIO_MEM_SIZE	0x20000000	/* 128M */
+#define CONFIG_SYS_RIO_MEM_BASE	0xc0000000	/* base address */
+#define CONFIG_SYS_RIO_MEM_PHYS	CONFIG_SYS_RIO_MEM_BASE
+#define CONFIG_SYS_RIO_MEM_SIZE	0x20000000	/* 128M */
 
 /*
  * General PCI
  * Addresses are mapped 1-1.
  */
-#define CFG_PCI1_MEM_BASE	0x80000000
-#define CFG_PCI1_MEM_PHYS	CFG_PCI1_MEM_BASE
-#define CFG_PCI1_MEM_SIZE	0x20000000	/* 512M */
-#define CFG_PCI1_IO_BASE	0xe2000000
-#define CFG_PCI1_IO_PHYS	CFG_PCI1_IO_BASE
-#define CFG_PCI1_IO_SIZE	0x1000000	/* 16M */
-
-/* PCI view of System Memory */
-#define CFG_PCI_MEMORY_BUS      0x00000000
-#define CFG_PCI_MEMORY_PHYS     0x00000000
-#define CFG_PCI_MEMORY_SIZE     0x80000000
-
-#define CFG_PCI2_MEM_BASE	0xa0000000
-#define CFG_PCI2_MEM_PHYS	CFG_PCI2_MEM_BASE
-#define CFG_PCI2_MEM_SIZE	0x10000000	/* 256M */
-#define CFG_PCI2_IO_BASE	0xe3000000
-#define CFG_PCI2_IO_PHYS	CFG_PCI2_IO_BASE
-#define CFG_PCI2_IO_SIZE	0x1000000	/* 16M */
+#define CONFIG_SYS_PCI1_MEM_BASE	0x80000000
+#define CONFIG_SYS_PCI1_MEM_PHYS	CONFIG_SYS_PCI1_MEM_BASE
+#define CONFIG_SYS_PCI1_MEM_SIZE	0x20000000	/* 512M */
+#define CONFIG_SYS_PCI1_IO_BASE	0xe2000000
+#define CONFIG_SYS_PCI1_IO_PHYS	CONFIG_SYS_PCI1_IO_BASE
+#define CONFIG_SYS_PCI1_IO_SIZE	0x1000000	/* 16M */
+
+#define CONFIG_SYS_PCI2_MEM_BASE	0xa0000000
+#define CONFIG_SYS_PCI2_MEM_PHYS	CONFIG_SYS_PCI2_MEM_BASE
+#define CONFIG_SYS_PCI2_MEM_SIZE	0x10000000	/* 256M */
+#define CONFIG_SYS_PCI2_IO_BASE	0xe3000000
+#define CONFIG_SYS_PCI2_IO_PHYS	CONFIG_SYS_PCI2_IO_BASE
+#define CONFIG_SYS_PCI2_IO_SIZE	0x1000000	/* 16M */
 
 #if defined(CONFIG_PCI)
 
 #define CONFIG_PCI_SCAN_SHOW            /* show pci devices on startup */
 
-#undef CFG_SCSI_SCAN_BUS_REVERSE
+#undef CONFIG_SYS_SCSI_SCAN_BUS_REVERSE
 
 #define CONFIG_NET_MULTI
 #define CONFIG_PCI_PNP			/* do pci plug-and-play */
@@ -345,10 +350,10 @@
 
 #ifdef CONFIG_SCSI_AHCI
 #define CONFIG_SATA_ULI5288
-#define CFG_SCSI_MAX_SCSI_ID	4
-#define CFG_SCSI_MAX_LUN	1
-#define CFG_SCSI_MAX_DEVICE	(CFG_SCSI_MAX_SCSI_ID * CFG_SCSI_MAX_LUN)
-#define CFG_SCSI_MAXDEVICE	CFG_SCSI_MAX_DEVICE
+#define CONFIG_SYS_SCSI_MAX_SCSI_ID	4
+#define CONFIG_SYS_SCSI_MAX_LUN	1
+#define CONFIG_SYS_SCSI_MAX_DEVICE	(CONFIG_SYS_SCSI_MAX_SCSI_ID * CONFIG_SYS_SCSI_MAX_LUN)
+#define CONFIG_SYS_SCSI_MAXDEVICE	CONFIG_SYS_SCSI_MAX_DEVICE
 #endif
 
 #endif	/* CONFIG_PCI */
@@ -383,7 +388,7 @@
 #define TSEC3_FLAGS		TSEC_GIGABIT
 #define TSEC4_FLAGS		TSEC_GIGABIT
 
-#define CFG_TBIPA_VALUE	0x1e	/* Set TBI address not to conflict with TSEC1_PHY_ADDR */
+#define CONFIG_SYS_TBIPA_VALUE	0x1e	/* Set TBI address not to conflict with TSEC1_PHY_ADDR */
 
 #define CONFIG_ETHPRIME		"eTSEC1"
 
@@ -393,10 +398,10 @@
  * BAT0         2G     Cacheable, non-guarded
  * 0x0000_0000  2G     DDR
  */
-#define CFG_DBAT0L	(BATL_PP_RW | BATL_MEMCOHERENCE)
-#define CFG_DBAT0U	(BATU_BL_2G | BATU_VS | BATU_VP)
-#define CFG_IBAT0L	(BATL_PP_RW | BATL_MEMCOHERENCE )
-#define CFG_IBAT0U	CFG_DBAT0U
+#define CONFIG_SYS_DBAT0L	(BATL_PP_RW | BATL_MEMCOHERENCE)
+#define CONFIG_SYS_DBAT0U	(BATU_BL_2G | BATU_VS | BATU_VP)
+#define CONFIG_SYS_IBAT0L	(BATL_PP_RW | BATL_MEMCOHERENCE )
+#define CONFIG_SYS_IBAT0U	CONFIG_SYS_DBAT0U
 
 /*
  * BAT1         1G     Cache-inhibited, guarded
@@ -404,31 +409,42 @@
  * 0xa000_0000  512M   PCI-Express 2 Memory
  *	Changed it for operating from 0xd0000000
  */
-#define CFG_DBAT1L	( CFG_PCI1_MEM_BASE | BATL_PP_RW \
+#define CONFIG_SYS_DBAT1L	( CONFIG_SYS_PCI1_MEM_BASE | BATL_PP_RW \
 			| BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
-#define CFG_DBAT1U	(CFG_PCI1_MEM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
-#define CFG_IBAT1L	(CFG_PCI1_MEM_BASE | BATL_PP_RW | BATL_CACHEINHIBIT)
-#define CFG_IBAT1U	CFG_DBAT1U
+#define CONFIG_SYS_DBAT1U	(CONFIG_SYS_PCI1_MEM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CONFIG_SYS_IBAT1L	(CONFIG_SYS_PCI1_MEM_BASE | BATL_PP_RW | BATL_CACHEINHIBIT)
+#define CONFIG_SYS_IBAT1U	CONFIG_SYS_DBAT1U
 
 /*
  * BAT2         512M   Cache-inhibited, guarded
  * 0xc000_0000  512M   RapidIO Memory
  */
-#define CFG_DBAT2L	(CFG_RIO_MEM_BASE | BATL_PP_RW \
+#define CONFIG_SYS_DBAT2L	(CONFIG_SYS_RIO_MEM_BASE | BATL_PP_RW \
 			| BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
-#define CFG_DBAT2U	(CFG_RIO_MEM_BASE | BATU_BL_512M | BATU_VS | BATU_VP)
-#define CFG_IBAT2L	(CFG_RIO_MEM_BASE | BATL_PP_RW | BATL_CACHEINHIBIT)
-#define CFG_IBAT2U	CFG_DBAT2U
+#define CONFIG_SYS_DBAT2U	(CONFIG_SYS_RIO_MEM_BASE | BATU_BL_512M | BATU_VS | BATU_VP)
+#define CONFIG_SYS_IBAT2L	(CONFIG_SYS_RIO_MEM_BASE | BATL_PP_RW | BATL_CACHEINHIBIT)
+#define CONFIG_SYS_IBAT2U	CONFIG_SYS_DBAT2U
 
 /*
  * BAT3         4M     Cache-inhibited, guarded
  * 0xf800_0000  4M     CCSR
  */
-#define CFG_DBAT3L	( CFG_CCSRBAR | BATL_PP_RW \
+#define CONFIG_SYS_DBAT3L	( CONFIG_SYS_CCSRBAR | BATL_PP_RW \
 			| BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
-#define CFG_DBAT3U	(CFG_CCSRBAR | BATU_BL_4M | BATU_VS | BATU_VP)
-#define CFG_IBAT3L	(CFG_CCSRBAR | BATL_PP_RW | BATL_CACHEINHIBIT)
-#define CFG_IBAT3U	CFG_DBAT3U
+#define CONFIG_SYS_DBAT3U	(CONFIG_SYS_CCSRBAR | BATU_BL_4M | BATU_VS | BATU_VP)
+#define CONFIG_SYS_IBAT3L	(CONFIG_SYS_CCSRBAR | BATL_PP_RW | BATL_CACHEINHIBIT)
+#define CONFIG_SYS_IBAT3U	CONFIG_SYS_DBAT3U
+
+#if (CONFIG_SYS_CCSRBAR_DEFAULT != CONFIG_SYS_CCSRBAR)
+#define CONFIG_SYS_CCSR_DEFAULT_DBATL (CONFIG_SYS_CCSRBAR_DEFAULT \
+				       | BATL_PP_RW | BATL_CACHEINHIBIT \
+				       | BATL_GUARDEDSTORAGE)
+#define CONFIG_SYS_CCSR_DEFAULT_DBATU (CONFIG_SYS_CCSRBAR_DEFAULT \
+				       | BATU_BL_1M | BATU_VS | BATU_VP)
+#define CONFIG_SYS_CCSR_DEFAULT_IBATL (CONFIG_SYS_CCSRBAR_DEFAULT \
+				       | BATL_PP_RW | BATL_CACHEINHIBIT)
+#define CONFIG_SYS_CCSR_DEFAULT_IBATU CONFIG_SYS_CCSR_DEFAULT_DBATU
+#endif
 
 /*
  * BAT4         32M    Cache-inhibited, guarded
@@ -436,46 +452,54 @@
  * 0xe300_0000  16M    PCI-Express 2 I/0
  *    Note that this is at 0xe0000000
  */
-#define CFG_DBAT4L	( CFG_PCI1_IO_BASE | BATL_PP_RW \
+#define CONFIG_SYS_DBAT4L	( CONFIG_SYS_PCI1_IO_BASE | BATL_PP_RW \
 			| BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
-#define CFG_DBAT4U	(CFG_PCI1_IO_BASE | BATU_BL_32M | BATU_VS | BATU_VP)
-#define CFG_IBAT4L	(CFG_PCI1_IO_BASE | BATL_PP_RW | BATL_CACHEINHIBIT)
-#define CFG_IBAT4U	CFG_DBAT4U
+#define CONFIG_SYS_DBAT4U	(CONFIG_SYS_PCI1_IO_BASE | BATU_BL_32M | BATU_VS | BATU_VP)
+#define CONFIG_SYS_IBAT4L	(CONFIG_SYS_PCI1_IO_BASE | BATL_PP_RW | BATL_CACHEINHIBIT)
+#define CONFIG_SYS_IBAT4U	CONFIG_SYS_DBAT4U
 
 /*
  * BAT5         128K   Cacheable, non-guarded
  * 0xe401_0000  128K   Init RAM for stack in the CPU DCache (no backing memory)
  */
-#define CFG_DBAT5L	(CFG_INIT_RAM_ADDR | BATL_PP_RW | BATL_MEMCOHERENCE)
-#define CFG_DBAT5U	(CFG_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP)
-#define CFG_IBAT5L	CFG_DBAT5L
-#define CFG_IBAT5U	CFG_DBAT5U
+#define CONFIG_SYS_DBAT5L	(CONFIG_SYS_INIT_RAM_ADDR | BATL_PP_RW | BATL_MEMCOHERENCE)
+#define CONFIG_SYS_DBAT5U	(CONFIG_SYS_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP)
+#define CONFIG_SYS_IBAT5L	CONFIG_SYS_DBAT5L
+#define CONFIG_SYS_IBAT5U	CONFIG_SYS_DBAT5U
 
 /*
  * BAT6         32M    Cache-inhibited, guarded
  * 0xfe00_0000  32M    FLASH
  */
-#define CFG_DBAT6L	((CFG_FLASH_BASE & 0xfe000000) | BATL_PP_RW \
+#define CONFIG_SYS_DBAT6L	((CONFIG_SYS_FLASH_BASE & 0xfe000000) | BATL_PP_RW \
 			| BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
-#define CFG_DBAT6U	((CFG_FLASH_BASE & 0xfe000000) | BATU_BL_32M | BATU_VS | BATU_VP)
-#define CFG_IBAT6L	((CFG_FLASH_BASE & 0xfe000000) | BATL_PP_RW | BATL_MEMCOHERENCE)
-#define CFG_IBAT6U	CFG_DBAT6U
-
-#define CFG_DBAT7L	0x00000000
-#define CFG_DBAT7U	0x00000000
-#define CFG_IBAT7L	0x00000000
-#define CFG_IBAT7U	0x00000000
+#define CONFIG_SYS_DBAT6U	((CONFIG_SYS_FLASH_BASE & 0xfe000000) | BATU_BL_32M | BATU_VS | BATU_VP)
+#define CONFIG_SYS_IBAT6L	((CONFIG_SYS_FLASH_BASE & 0xfe000000) | BATL_PP_RW | BATL_MEMCOHERENCE)
+#define CONFIG_SYS_IBAT6U	CONFIG_SYS_DBAT6U
+
+/* Map the last 1M of flash where we're running from reset */
+#define CONFIG_SYS_DBAT6L_EARLY	(CONFIG_SYS_MONITOR_BASE_EARLY | BATL_PP_RW \
+				 | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
+#define CONFIG_SYS_DBAT6U_EARLY	(TEXT_BASE | BATU_BL_1M | BATU_VS | BATU_VP)
+#define CONFIG_SYS_IBAT6L_EARLY	(CONFIG_SYS_MONITOR_BASE_EARLY | BATL_PP_RW \
+				 | BATL_MEMCOHERENCE)
+#define CONFIG_SYS_IBAT6U_EARLY	CONFIG_SYS_DBAT6U_EARLY
+
+#define CONFIG_SYS_DBAT7L	0x00000000
+#define CONFIG_SYS_DBAT7U	0x00000000
+#define CONFIG_SYS_IBAT7L	0x00000000
+#define CONFIG_SYS_IBAT7U	0x00000000
 
 /*
  * Environment
  */
-#define CFG_ENV_IS_IN_FLASH	1
-#define CFG_ENV_ADDR		(CFG_MONITOR_BASE + 0x40000)
-#define CFG_ENV_SECT_SIZE	0x40000	/* 256K(one sector) for env */
-#define CFG_ENV_SIZE		0x2000
+#define CONFIG_ENV_IS_IN_FLASH	1
+#define CONFIG_ENV_ADDR		(CONFIG_SYS_MONITOR_BASE + 0x40000)
+#define CONFIG_ENV_SECT_SIZE	0x40000	/* 256K(one sector) for env */
+#define CONFIG_ENV_SIZE		0x2000
 
 #define CONFIG_LOADS_ECHO	1	/* echo on for serial download */
-#define CFG_LOADS_BAUD_CHANGE	1	/* allow baudrate change */
+#define CONFIG_SYS_LOADS_BAUD_CHANGE	1	/* allow baudrate change */
 
 #include <config_cmd_default.h>
     #define CONFIG_CMD_PING
@@ -491,33 +515,33 @@
 /*
  * Miscellaneous configurable options
  */
-#define CFG_LONGHELP			/* undef to save memory	*/
-#define CFG_LOAD_ADDR	0x2000000	/* default load address */
-#define CFG_PROMPT	"=> "		/* Monitor Command Prompt */
+#define CONFIG_SYS_LONGHELP			/* undef to save memory	*/
+#define CONFIG_SYS_LOAD_ADDR	0x2000000	/* default load address */
+#define CONFIG_SYS_PROMPT	"=> "		/* Monitor Command Prompt */
 
 #if defined(CONFIG_CMD_KGDB)
-    #define CFG_CBSIZE	1024		/* Console I/O Buffer Size */
+    #define CONFIG_SYS_CBSIZE	1024		/* Console I/O Buffer Size */
 #else
-    #define CFG_CBSIZE	256		/* Console I/O Buffer Size */
+    #define CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size */
 #endif
 
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define CFG_MAXARGS	16		/* max number of command args */
-#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size */
-#define CFG_HZ		1000		/* decrementer freq: 1ms ticks */
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS	16		/* max number of command args */
+#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size */
+#define CONFIG_SYS_HZ		1000		/* decrementer freq: 1ms ticks */
 
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define CFG_BOOTMAPSZ	(8 << 20)	/* Initial Memory map for Linux*/
+#define CONFIG_SYS_BOOTMAPSZ	(8 << 20)	/* Initial Memory map for Linux*/
 
 /* Cache Configuration */
-#define CFG_DCACHE_SIZE		32768
-#define CFG_CACHELINE_SIZE	32
+#define CONFIG_SYS_DCACHE_SIZE		32768
+#define CONFIG_SYS_CACHELINE_SIZE	32
 #if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT	5	/*log base 2 of the above value*/
+#define CONFIG_SYS_CACHELINE_SHIFT	5	/*log base 2 of the above value*/
 #endif
 
 /*
diff --git a/include/configs/sc3.h b/include/configs/sc3.h
index 659f74ed9..d152a9670 100644
--- a/include/configs/sc3.h
+++ b/include/configs/sc3.h
@@ -128,7 +128,7 @@
 #undef CONFIG_BOOTCOMMAND
 
 #define CONFIG_SILENT_CONSOLE	1	/* enable silent startup */
-#define CFG_DEVICE_NULLDEV	1	/* include nulldev device	*/
+#define CONFIG_SYS_DEVICE_NULLDEV	1	/* include nulldev device	*/
 
 #if 1	/* feel free to disable for development */
 #define CONFIG_AUTOBOOT_KEYED		/* Enable password protection	*/
@@ -160,12 +160,14 @@
 #undef CONFIG_ISP1161_PRESENT
 
 #undef CONFIG_LOADS_ECHO   /* no echo on for serial download	*/
-#define CFG_LOADS_BAUD_CHANGE	1	/* allow baudrate change	*/
+#define CONFIG_SYS_LOADS_BAUD_CHANGE	1	/* allow baudrate change	*/
 
 #define CONFIG_NET_MULTI
 /* #define CONFIG_EEPRO100_SROM_WRITE */
 /* #define CONFIG_SHOW_MAC */
 #define CONFIG_EEPRO100
+
+#define CONFIG_PPC4xx_EMAC
 #define CONFIG_MII 1			/* add 405GP MII PHY management		*/
 #define CONFIG_PHY_ADDR 1	/* the connected Phy defaults to address 1 */
 
@@ -205,42 +207,42 @@
 /*
  * Miscellaneous configurable options
  */
-#define CFG_LONGHELP	1		/* undef to save memory		*/
-#define CFG_PROMPT	"SC3> "	/* Monitor Command Prompt	*/
-#define	CFG_CBSIZE	256		/* Console I/O Buffer Size	*/
+#define CONFIG_SYS_LONGHELP	1		/* undef to save memory		*/
+#define CONFIG_SYS_PROMPT	"SC3> "	/* Monitor Command Prompt	*/
+#define	CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size	*/
 
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
 
-#define CFG_MAXARGS	16		/* max number of command args	*/
-#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+#define CONFIG_SYS_MAXARGS	16		/* max number of command args	*/
+#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
 
-#define CFG_MEMTEST_START	0x0400000	/* memtest works on	*/
-#define CFG_MEMTEST_END		0x0C00000	/* 4 ... 12 MB in DRAM	*/
+#define CONFIG_SYS_MEMTEST_START	0x0400000	/* memtest works on	*/
+#define CONFIG_SYS_MEMTEST_END		0x0C00000	/* 4 ... 12 MB in DRAM	*/
 
 /*
- * If CFG_EXT_SERIAL_CLOCK, then the UART divisor is 1.
- * If CFG_405_UART_ERRATA_59, then UART divisor is 31.
- * Otherwise, UART divisor is determined by CPU Clock and CFG_BASE_BAUD value.
+ * If CONFIG_SYS_EXT_SERIAL_CLOCK, then the UART divisor is 1.
+ * If CONFIG_SYS_405_UART_ERRATA_59, then UART divisor is 31.
+ * Otherwise, UART divisor is determined by CPU Clock and CONFIG_SYS_BASE_BAUD value.
  * The Linux BASE_BAUD define should match this configuration.
  *    baseBaud = cpuClock/(uartDivisor*16)
- * If CFG_405_UART_ERRATA_59 and 200MHz CPU clock,
+ * If CONFIG_SYS_405_UART_ERRATA_59 and 200MHz CPU clock,
  * set Linux BASE_BAUD to 403200.
  *
  * Consider the OPB clock! If it get lower the BASE_BAUD must be lower to
  * (see 405GP datasheet for descritpion)
  */
-#undef	CFG_EXT_SERIAL_CLOCK		/* external serial clock */
-#undef	CFG_405_UART_ERRATA_59		/* 405GP/CR Rev. D silicon */
-#define CFG_BASE_BAUD		921600	/* internal clock */
+#undef	CONFIG_SYS_EXT_SERIAL_CLOCK		/* external serial clock */
+#undef	CONFIG_SYS_405_UART_ERRATA_59		/* 405GP/CR Rev. D silicon */
+#define CONFIG_SYS_BASE_BAUD		921600	/* internal clock */
 
 /* The following table includes the supported baudrates */
-#define CFG_BAUDRATE_TABLE  \
+#define CONFIG_SYS_BAUDRATE_TABLE  \
     {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400}
 
-#define CFG_LOAD_ADDR		0x1000000	/* default load address */
-#define CFG_EXTBDINFO		1	/* To use extended board_into (bd_t) */
+#define CONFIG_SYS_LOAD_ADDR		0x1000000	/* default load address */
+#define CONFIG_SYS_EXTBDINFO		1	/* To use extended board_into (bd_t) */
 
-#define	CFG_HZ			1000	/* decrementer freq: 1 ms ticks	*/
+#define	CONFIG_SYS_HZ			1000	/* decrementer freq: 1 ms ticks	*/
 
 /*-----------------------------------------------------------------------
  * IIC stuff
@@ -253,11 +255,11 @@
 #define I2C_ACTIVE 0
 #define I2C_TRISTATE 0
 
-#define CFG_I2C_SPEED		100000	/* use the standard 100kHz speed */
-#define CFG_I2C_SLAVE		0x7F		/* mask valid bits */
+#define CONFIG_SYS_I2C_SPEED		100000	/* use the standard 100kHz speed */
+#define CONFIG_SYS_I2C_SLAVE		0x7F		/* mask valid bits */
 
 #define CONFIG_RTC_DS1337
-#define CFG_I2C_RTC_ADDR 0x68
+#define CONFIG_SYS_I2C_RTC_ADDR 0x68
 
 /*-----------------------------------------------------------------------
  * PCI stuff
@@ -275,14 +277,14 @@
 /* If you want to see, whats connected to your PCI bus */
 /* #define CONFIG_PCI_SCAN_SHOW */
 
-#define CFG_PCI_SUBSYS_VENDORID 0x0000	/* PCI Vendor ID: to-do!!!	*/
-#define CFG_PCI_SUBSYS_DEVICEID 0x0000	/* PCI Device ID: to-do!!!	*/
-#define CFG_PCI_PTM1LA	0x00000000	/* point to sdram		*/
-#define CFG_PCI_PTM1MS	0x80000001	/* 2GB, enable hard-wired to 1	*/
-#define CFG_PCI_PTM1PCI 0x00000000	/* Host: use this pci address	*/
-#define CFG_PCI_PTM2LA	0x00000000	/* disabled			*/
-#define CFG_PCI_PTM2MS	0x00000000	/* disabled			*/
-#define CFG_PCI_PTM2PCI 0x04000000	/* Host: use this pci address	*/
+#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x0000	/* PCI Vendor ID: to-do!!!	*/
+#define CONFIG_SYS_PCI_SUBSYS_DEVICEID 0x0000	/* PCI Device ID: to-do!!!	*/
+#define CONFIG_SYS_PCI_PTM1LA	0x00000000	/* point to sdram		*/
+#define CONFIG_SYS_PCI_PTM1MS	0x80000001	/* 2GB, enable hard-wired to 1	*/
+#define CONFIG_SYS_PCI_PTM1PCI 0x00000000	/* Host: use this pci address	*/
+#define CONFIG_SYS_PCI_PTM2LA	0x00000000	/* disabled			*/
+#define CONFIG_SYS_PCI_PTM2MS	0x00000000	/* disabled			*/
+#define CONFIG_SYS_PCI_PTM2PCI 0x04000000	/* Host: use this pci address	*/
 
 /*-----------------------------------------------------------------------
  * External peripheral base address
@@ -306,113 +308,113 @@
 
 #define	CONFIG_ATAPI
 #define	CONFIG_DOS_PARTITION
-#define	CFG_IDE_MAXDEVICE	(CFG_IDE_MAXBUS*1) /* max. 1 drives per IDE bus */
+#define	CONFIG_SYS_IDE_MAXDEVICE	(CONFIG_SYS_IDE_MAXBUS*1) /* max. 1 drives per IDE bus */
 
 #ifndef IDE_USES_ISA_EMULATION
 
 /* New and faster access */
-#define	CFG_ATA_BASE_ADDR		0x7A000000	/* start of ISA IO emulation */
+#define	CONFIG_SYS_ATA_BASE_ADDR		0x7A000000	/* start of ISA IO emulation */
 
 /* How many IDE busses are available */
-#define	CFG_IDE_MAXBUS		1
+#define	CONFIG_SYS_IDE_MAXBUS		1
 
 /* What IDE ports are available */
-#define	CFG_ATA_IDE0_OFFSET	0x000		/* first is available */
-#undef	CFG_ATA_IDE1_OFFSET			/* second not available */
+#define	CONFIG_SYS_ATA_IDE0_OFFSET	0x000		/* first is available */
+#undef	CONFIG_SYS_ATA_IDE1_OFFSET			/* second not available */
 
 /* access to the data port is calculated:
-   CFG_ATA_BASE_ADDR + CFG_ATA_IDE0_OFFSET + CFG_ATA_DATA_OFFSET + 0 */
-#define CFG_ATA_DATA_OFFSET	0x0000	/* Offset for data I/O */
+   CONFIG_SYS_ATA_BASE_ADDR + CONFIG_SYS_ATA_IDE0_OFFSET + CONFIG_SYS_ATA_DATA_OFFSET + 0 */
+#define CONFIG_SYS_ATA_DATA_OFFSET	0x0000	/* Offset for data I/O */
 
 /* access to the registers is calculated:
-   CFG_ATA_BASE_ADDR + CFG_ATA_IDE0_OFFSET + CFG_ATA_REG_OFFSET + [1..7] */
-#define	CFG_ATA_REG_OFFSET	0x0000	/* Offset for normal register accesses	*/
+   CONFIG_SYS_ATA_BASE_ADDR + CONFIG_SYS_ATA_IDE0_OFFSET + CONFIG_SYS_ATA_REG_OFFSET + [1..7] */
+#define	CONFIG_SYS_ATA_REG_OFFSET	0x0000	/* Offset for normal register accesses	*/
 
 /* access to the alternate register is calculated:
-   CFG_ATA_BASE_ADDR + CFG_ATA_IDE0_OFFSET + CFG_ATA_ALT_OFFSET + 6 */
-#define CFG_ATA_ALT_OFFSET	0x008		/* Offset for alternate registers	*/
+   CONFIG_SYS_ATA_BASE_ADDR + CONFIG_SYS_ATA_IDE0_OFFSET + CONFIG_SYS_ATA_ALT_OFFSET + 6 */
+#define CONFIG_SYS_ATA_ALT_OFFSET	0x008		/* Offset for alternate registers	*/
 
 #else /* IDE_USES_ISA_EMULATION */
 
-#define	CFG_ATA_BASE_ADDR		0x79000000	/* start of ISA IO emulation */
+#define	CONFIG_SYS_ATA_BASE_ADDR		0x79000000	/* start of ISA IO emulation */
 
 /* How many IDE busses are available */
-#define	CFG_IDE_MAXBUS		1
+#define	CONFIG_SYS_IDE_MAXBUS		1
 
 /* What IDE ports are available */
-#define	CFG_ATA_IDE0_OFFSET	0x01F0	/* first is available */
-#undef	CFG_ATA_IDE1_OFFSET				/* second not available */
+#define	CONFIG_SYS_ATA_IDE0_OFFSET	0x01F0	/* first is available */
+#undef	CONFIG_SYS_ATA_IDE1_OFFSET				/* second not available */
 
 /* access to the data port is calculated:
-   CFG_ATA_BASE_ADDR + CFG_ATA_IDE0_OFFSET + CFG_ATA_DATA_OFFSET + 0 */
-#define CFG_ATA_DATA_OFFSET	0x0000	/* Offset for data I/O */
+   CONFIG_SYS_ATA_BASE_ADDR + CONFIG_SYS_ATA_IDE0_OFFSET + CONFIG_SYS_ATA_DATA_OFFSET + 0 */
+#define CONFIG_SYS_ATA_DATA_OFFSET	0x0000	/* Offset for data I/O */
 
 /* access to the registers is calculated:
-   CFG_ATA_BASE_ADDR + CFG_ATA_IDE0_OFFSET + CFG_ATA_REG_OFFSET + [1..7] */
-#define	CFG_ATA_REG_OFFSET	0x0000	/* Offset for normal register accesses	*/
+   CONFIG_SYS_ATA_BASE_ADDR + CONFIG_SYS_ATA_IDE0_OFFSET + CONFIG_SYS_ATA_REG_OFFSET + [1..7] */
+#define	CONFIG_SYS_ATA_REG_OFFSET	0x0000	/* Offset for normal register accesses	*/
 
 /* access to the alternate register is calculated:
-   CFG_ATA_BASE_ADDR + CFG_ATA_IDE0_OFFSET + CFG_ATA_ALT_OFFSET + 6 */
-#define CFG_ATA_ALT_OFFSET	0x03F0		/* Offset for alternate registers	*/
+   CONFIG_SYS_ATA_BASE_ADDR + CONFIG_SYS_ATA_IDE0_OFFSET + CONFIG_SYS_ATA_ALT_OFFSET + 6 */
+#define CONFIG_SYS_ATA_ALT_OFFSET	0x03F0		/* Offset for alternate registers	*/
 
 #endif /* IDE_USES_ISA_EMULATION */
 
 #endif
 
 /*
-#define	CFG_KEY_REG_BASE_ADDR	0xF0100000
-#define	CFG_IR_REG_BASE_ADDR	0xF0200000
-#define	CFG_FPGA_REG_BASE_ADDR	0xF0300000
+#define	CONFIG_SYS_KEY_REG_BASE_ADDR	0xF0100000
+#define	CONFIG_SYS_IR_REG_BASE_ADDR	0xF0200000
+#define	CONFIG_SYS_FPGA_REG_BASE_ADDR	0xF0300000
 */
 
 /*-----------------------------------------------------------------------
  * Start addresses for the final memory configuration
  * (Set up by the startup code)
- * Please note that CFG_SDRAM_BASE _must_ start at 0
+ * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
  *
- * CFG_FLASH_BASE   -> start address of internal flash
- * CFG_MONITOR_BASE -> start of u-boot
+ * CONFIG_SYS_FLASH_BASE   -> start address of internal flash
+ * CONFIG_SYS_MONITOR_BASE -> start of u-boot
  */
 #ifndef __ASSEMBLER__
 extern unsigned long offsetOfBigFlash;
 extern unsigned long offsetOfEnvironment;
 #endif
 
-#define CFG_SDRAM_BASE		0x00000000
-#define CFG_FLASH_BASE		0xFFE00000
-#define CFG_MONITOR_BASE	0xFFFC0000     /* placed last 256k */
-#define CFG_MONITOR_LEN		(224 * 1024)	/* Reserve 224 KiB for Monitor	*/
-#define CFG_MALLOC_LEN		(128 * 1024)	/* Reserve 128 KiB for malloc()	*/
+#define CONFIG_SYS_SDRAM_BASE		0x00000000
+#define CONFIG_SYS_FLASH_BASE		0xFFE00000
+#define CONFIG_SYS_MONITOR_BASE	0xFFFC0000     /* placed last 256k */
+#define CONFIG_SYS_MONITOR_LEN		(224 * 1024)	/* Reserve 224 KiB for Monitor	*/
+#define CONFIG_SYS_MALLOC_LEN		(128 * 1024)	/* Reserve 128 KiB for malloc()	*/
 
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MiB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
+#define CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
 /*-----------------------------------------------------------------------
  * FLASH organization ## FIXME: lookup in datasheet
  */
-#define CFG_MAX_FLASH_BANKS	2	/* max number of memory banks		*/
-#define CFG_MAX_FLASH_SECT	256	/* max number of sectors on one chip	*/
+#define CONFIG_SYS_MAX_FLASH_BANKS	2	/* max number of memory banks		*/
+#define CONFIG_SYS_MAX_FLASH_SECT	256	/* max number of sectors on one chip	*/
 
-#define CFG_FLASH_CFI			/* flash is CFI compat.	*/
+#define CONFIG_SYS_FLASH_CFI			/* flash is CFI compat.	*/
 #define CONFIG_FLASH_CFI_DRIVER		/* Use common CFI driver*/
-#define CFG_FLASH_EMPTY_INFO		/* print 'E' for empty sector	*/
-#define CFG_FLASH_QUIET_TEST	1	/* don't warn upon unknown flash*/
-#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
-#define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
-#define CFG_WRITE_SWAPPED_DATA		/* swap Databytes between reading/writing */
-
-#define CFG_ENV_IS_IN_FLASH	1
-#if CFG_ENV_IS_IN_FLASH
-#define CFG_ENV_OFFSET		0x00000000  /* Offset of Environment Sector in bottom type */
-#define CFG_ENV_SIZE		0x4000	    /* Total Size of Environment Sector	*/
-#define CFG_ENV_SECT_SIZE	0x4000	    /* see README - env sector total size	*/
+#define CONFIG_SYS_FLASH_EMPTY_INFO		/* print 'E' for empty sector	*/
+#define CONFIG_SYS_FLASH_QUIET_TEST	1	/* don't warn upon unknown flash*/
+#define CONFIG_SYS_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
+#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
+#define CONFIG_SYS_WRITE_SWAPPED_DATA		/* swap Databytes between reading/writing */
+
+#define CONFIG_ENV_IS_IN_FLASH	1
+#ifdef CONFIG_ENV_IS_IN_FLASH
+#define CONFIG_ENV_OFFSET		0x00000000  /* Offset of Environment Sector in bottom type */
+#define CONFIG_ENV_SIZE		0x4000	    /* Total Size of Environment Sector	*/
+#define CONFIG_ENV_SECT_SIZE	0x4000	    /* see README - env sector total size	*/
 
 /* Address and size of Redundant Environment Sector	*/
-#define CFG_ENV_OFFSET_REDUND	(CFG_ENV_OFFSET+CFG_ENV_SIZE)
-#define CFG_ENV_SIZE_REDUND	(CFG_ENV_SIZE)
+#define CONFIG_ENV_OFFSET_REDUND	(CONFIG_ENV_OFFSET+CONFIG_ENV_SIZE)
+#define CONFIG_ENV_SIZE_REDUND	(CONFIG_ENV_SIZE)
 
 #endif
 /* let us changing anything in our environment */
@@ -421,9 +423,9 @@ extern unsigned long offsetOfEnvironment;
 /*
  * NAND-FLASH stuff
  */
-#define CFG_MAX_NAND_DEVICE	1
+#define CONFIG_SYS_MAX_NAND_DEVICE	1
 #define NAND_MAX_CHIPS		1
-#define CFG_NAND_BASE		0x77D00000
+#define CONFIG_SYS_NAND_BASE		0x77D00000
 
 
 #define CONFIG_JFFS2_NAND 1			/* jffs2 on nand support */
@@ -439,55 +441,55 @@ extern unsigned long offsetOfEnvironment;
  *
  */
 
-#define FLASH_BASE0_PRELIM	CFG_FLASH_BASE
+#define FLASH_BASE0_PRELIM	CONFIG_SYS_FLASH_BASE
 #define FLASH_BASE1_PRELIM	0
 
 /*-----------------------------------------------------------------------
  * Some informations about the internal SRAM (OCM=On Chip Memory)
  *
- * CFG_OCM_DATA_ADDR -> location
- * CFG_OCM_DATA_SIZE -> size
+ * CONFIG_SYS_OCM_DATA_ADDR -> location
+ * CONFIG_SYS_OCM_DATA_SIZE -> size
 */
 
-#define CFG_TEMP_STACK_OCM	1
-#define CFG_OCM_DATA_ADDR	0xF8000000
-#define CFG_OCM_DATA_SIZE	0x1000
+#define CONFIG_SYS_TEMP_STACK_OCM	1
+#define CONFIG_SYS_OCM_DATA_ADDR	0xF8000000
+#define CONFIG_SYS_OCM_DATA_SIZE	0x1000
 
 /*-----------------------------------------------------------------------
  * Definitions for initial stack pointer and data area (in DPRAM):
  * - we are using the internal 4k SRAM, so we don't need data cache mapping
- * - internal SRAM (OCM=On Chip Memory) is placed to CFG_OCM_DATA_ADDR
+ * - internal SRAM (OCM=On Chip Memory) is placed to CONFIG_SYS_OCM_DATA_ADDR
  * - Stackpointer will be located to
- *   (CFG_INIT_RAM_ADDR&0xFFFF0000) | (CFG_INIT_SP_OFFSET&0x0000FFFF)
+ *   (CONFIG_SYS_INIT_RAM_ADDR&0xFFFF0000) | (CONFIG_SYS_INIT_SP_OFFSET&0x0000FFFF)
  *   in cpu/ppc4xx/start.S
  */
 
-#undef CFG_INIT_DCACHE_CS
+#undef CONFIG_SYS_INIT_DCACHE_CS
 /* Where the internal SRAM starts */
-#define CFG_INIT_RAM_ADDR	CFG_OCM_DATA_ADDR
+#define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_OCM_DATA_ADDR
 /* Where the internal SRAM ends (only offset) */
-#define CFG_INIT_RAM_END	0x0F00
+#define CONFIG_SYS_INIT_RAM_END	0x0F00
 
 /*
 
- CFG_INIT_RAM_ADDR ------> ------------ lower address
+ CONFIG_SYS_INIT_RAM_ADDR ------> ------------ lower address
 			   |	      |
 			   |  ^       |
 			   |  |       |
 			   |  | Stack |
- CFG_GBL_DATA_OFFSET ----> ------------
+ CONFIG_SYS_GBL_DATA_OFFSET ----> ------------
 			   |	      |
 			   | 64 Bytes |
 			   |	      |
- CFG_INIT_RAM_END  ------> ------------ higher address
+ CONFIG_SYS_INIT_RAM_END  ------> ------------ higher address
   (offset only)
 
 */
 /* size in bytes reserved for initial data */
-#define CFG_GBL_DATA_SIZE     64
-#define CFG_GBL_DATA_OFFSET   (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define CONFIG_SYS_GBL_DATA_SIZE     64
+#define CONFIG_SYS_GBL_DATA_OFFSET   (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
 /* Initial value of the stack pointern in internal SRAM */
-#define CFG_INIT_SP_OFFSET    CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_INIT_SP_OFFSET    CONFIG_SYS_GBL_DATA_OFFSET
 
 /*
  * Internal Definitions
@@ -504,31 +506,31 @@ extern unsigned long offsetOfEnvironment;
 /* This chip select accesses the boot device */
 /* It depends on boot select switch if this device is 16 or 8 bit */
 
-#undef CFG_EBC_PB0AP
-#undef CFG_EBC_PB0CR
+#undef CONFIG_SYS_EBC_PB0AP
+#undef CONFIG_SYS_EBC_PB0CR
 
-#undef CFG_EBC_PB1AP
-#undef CFG_EBC_PB1CR
+#undef CONFIG_SYS_EBC_PB1AP
+#undef CONFIG_SYS_EBC_PB1CR
 
-#undef CFG_EBC_PB2AP
-#undef CFG_EBC_PB2CR
+#undef CONFIG_SYS_EBC_PB2AP
+#undef CONFIG_SYS_EBC_PB2CR
 
-#undef CFG_EBC_PB3AP
-#undef CFG_EBC_PB3CR
+#undef CONFIG_SYS_EBC_PB3AP
+#undef CONFIG_SYS_EBC_PB3CR
 
-#undef CFG_EBC_PB4AP
-#undef CFG_EBC_PB4CR
+#undef CONFIG_SYS_EBC_PB4AP
+#undef CONFIG_SYS_EBC_PB4CR
 
-#undef CFG_EBC_PB5AP
-#undef CFG_EBC_PB5CR
+#undef CONFIG_SYS_EBC_PB5AP
+#undef CONFIG_SYS_EBC_PB5CR
 
-#undef CFG_EBC_PB6AP
-#undef CFG_EBC_PB6CR
+#undef CONFIG_SYS_EBC_PB6AP
+#undef CONFIG_SYS_EBC_PB6CR
 
-#undef CFG_EBC_PB7AP
-#undef CFG_EBC_PB7CR
+#undef CONFIG_SYS_EBC_PB7AP
+#undef CONFIG_SYS_EBC_PB7CR
 
-#define CFG_EBC_CFG    0xb84ef000
+#define CONFIG_SYS_EBC_CFG    0xb84ef000
 
 #define CONFIG_SDRAM_BANK0	/* use the standard SDRAM initialization */
 #undef CONFIG_SPD_EEPROM
@@ -543,15 +545,15 @@ extern unsigned long offsetOfEnvironment;
  * External peripheral base address
  ***********************************************************************/
 
-#define CFG_ISA_MEM_BASE_ADDRESS 0x78000000
+#define CONFIG_SYS_ISA_MEM_BASE_ADDRESS 0x78000000
 /*
  Die Grafik-Treiber greifen über die Adresse in diesem Macro auf den Chip zu.
  Das funktioniert bei deren Karten, weil sie eine PCI-Bridge benutzen, die
  das gleiche Mapping durchführen kann, wie der SC520 (also Aufteilen von IO-Zugriffen
  auf ISA- und PCI-Zyklen)
  */
-#define CFG_ISA_IO_BASE_ADDRESS  0xE8000000
-/*#define CFG_ISA_IO_BASE_ADDRESS  0x79000000 */
+#define CONFIG_SYS_ISA_IO_BASE_ADDRESS  0xE8000000
+/*#define CONFIG_SYS_ISA_IO_BASE_ADDRESS  0x79000000 */
 
 /************************************************************
  * Video support
diff --git a/include/configs/sc520_cdp.h b/include/configs/sc520_cdp.h
index e29655e63..bf8693e46 100644
--- a/include/configs/sc520_cdp.h
+++ b/include/configs/sc520_cdp.h
@@ -28,6 +28,7 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
+#define GRUSS_TESTING
 /*
  * High Level Configuration Options
  * (easy to change)
@@ -37,24 +38,24 @@
 #define CONFIG_SC520		1	/* Include support for AMD SC520 */
 #define CONFIG_ALI152X		1	/* Include support for Ali 152x SIO */
 
-#define CFG_SDRAM_PRECHARGE_DELAY 6     /* 6T */
-#define CFG_SDRAM_REFRESH_RATE    78    /* 7.8uS (choices are 7.8, 15.6, 31.2 or 62.5uS) */
-#define CFG_SDRAM_RAS_CAS_DELAY   3     /* 3T */
+#define CONFIG_SYS_SDRAM_PRECHARGE_DELAY 6     /* 6T */
+#define CONFIG_SYS_SDRAM_REFRESH_RATE    78    /* 7.8uS (choices are 7.8, 15.6, 31.2 or 62.5uS) */
+#define CONFIG_SYS_SDRAM_RAS_CAS_DELAY   3     /* 3T */
 
 /* define at most one of these */
-#undef CFG_SDRAM_CAS_LATENCY_2T
-#define CFG_SDRAM_CAS_LATENCY_3T
-
-#define CFG_SC520_HIGH_SPEED    0       /* 100 or 133MHz */
-#define CFG_RESET_GENERIC       1       /* use tripple-fault to reset cpu */
-#undef  CFG_RESET_SC520                 /* use SC520 MMCR's to reset cpu */
-#undef  CFG_TIMER_SC520                 /* use SC520 swtimers */
-#define CFG_TIMER_GENERIC       1       /* use the i8254 PIT timers */
-#undef  CFG_TIMER_TSC                   /* use the Pentium TSC timers */
-#define  CFG_USE_SIO_UART       0       /* prefer the uarts on the SIO to those
+#undef CONFIG_SYS_SDRAM_CAS_LATENCY_2T
+#define CONFIG_SYS_SDRAM_CAS_LATENCY_3T
+
+#define CONFIG_SYS_SC520_HIGH_SPEED    0       /* 100 or 133MHz */
+#define CONFIG_SYS_RESET_GENERIC       1       /* use tripple-fault to reset cpu */
+#undef  CONFIG_SYS_RESET_SC520                 /* use SC520 MMCR's to reset cpu */
+#undef  CONFIG_SYS_TIMER_SC520                 /* use SC520 swtimers */
+#define CONFIG_SYS_TIMER_GENERIC       1       /* use the i8254 PIT timers */
+#undef  CONFIG_SYS_TIMER_TSC                   /* use the Pentium TSC timers */
+#define  CONFIG_SYS_USE_SIO_UART       0       /* prefer the uarts on the SIO to those
 					 * in the SC520 on the CDP */
 
-#define CFG_STACK_SIZE          0x8000  /* Size of bootloader stack */
+#define CONFIG_SYS_STACK_SIZE          0x8000  /* Size of bootloader stack */
 
 #define CONFIG_SHOW_BOOT_PROGRESS 1
 #define CONFIG_LAST_STAGE_INIT    1
@@ -62,7 +63,7 @@
 /*
  * Size of malloc() pool
  */
-#define CONFIG_MALLOC_SIZE	(CFG_ENV_SIZE + 128*1024)
+#define CONFIG_MALLOC_SIZE	(CONFIG_ENV_SIZE + 128*1024)
 
 #define CONFIG_BAUDRATE		9600
 
@@ -81,7 +82,11 @@
 #include <config_cmd_default.h>
 
 #define CONFIG_CMD_PCI
+#ifndef GRUSS_TESTING
 #define CONFIG_CMD_SATA
+#else
+#undef CONFIG_CMD_SATA
+#endif
 #define CONFIG_CMD_JFFS2
 #define CONFIG_CMD_NET
 #define CONFIG_CMD_EEPROM
@@ -98,24 +103,24 @@
 /*
  * Miscellaneous configurable options
  */
-#define	CFG_LONGHELP				/* undef to save memory		*/
-#define	CFG_PROMPT		"boot > "	/* Monitor Command Prompt	*/
-#define	CFG_CBSIZE		256		/* Console I/O Buffer Size	*/
-#define	CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define	CFG_MAXARGS		16		/* max number of command args	*/
-#define CFG_BARGSIZE		CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+#define	CONFIG_SYS_LONGHELP				/* undef to save memory		*/
+#define	CONFIG_SYS_PROMPT		"boot > "	/* Monitor Command Prompt	*/
+#define	CONFIG_SYS_CBSIZE		256		/* Console I/O Buffer Size	*/
+#define	CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define	CONFIG_SYS_MAXARGS		16		/* max number of command args	*/
+#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
 
-#define CFG_MEMTEST_START	0x00100000	/* memtest works on	*/
-#define CFG_MEMTEST_END		0x01000000	/* 1 ... 16 MB in DRAM	*/
+#define CONFIG_SYS_MEMTEST_START	0x00100000	/* memtest works on	*/
+#define CONFIG_SYS_MEMTEST_END		0x01000000	/* 1 ... 16 MB in DRAM	*/
 
-#undef  CFG_CLKS_IN_HZ		/* everything, incl board info, in Hz */
+#undef  CONFIG_SYS_CLKS_IN_HZ		/* everything, incl board info, in Hz */
 
-#define	CFG_LOAD_ADDR		0x100000	/* default load address	*/
+#define	CONFIG_SYS_LOAD_ADDR		0x100000	/* default load address	*/
 
-#define	CFG_HZ			1024		/* incrementer freq: 1kHz */
+#define	CONFIG_SYS_HZ			1024		/* incrementer freq: 1kHz */
 
 						/* valid baudrates */
-#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
 
 /*-----------------------------------------------------------------------
  * Physical Memory Map
@@ -125,12 +130,12 @@
 /*-----------------------------------------------------------------------
  * FLASH and environment organization
  */
-#define CFG_MAX_FLASH_BANKS	3	/* max number of memory banks		*/
-#define CFG_MAX_FLASH_SECT	64	/* max number of sectors on one chip	*/
+#define CONFIG_SYS_MAX_FLASH_BANKS	3	/* max number of memory banks		*/
+#define CONFIG_SYS_MAX_FLASH_SECT	64	/* max number of sectors on one chip	*/
 
 /* timeout values are in ticks */
-#define CFG_FLASH_ERASE_TOUT	(2*CFG_HZ) /* Timeout for Flash Erase */
-#define CFG_FLASH_WRITE_TOUT	(2*CFG_HZ) /* Timeout for Flash Write */
+#define CONFIG_SYS_FLASH_ERASE_TOUT	(2*CONFIG_SYS_HZ) /* Timeout for Flash Erase */
+#define CONFIG_SYS_FLASH_WRITE_TOUT	(2*CONFIG_SYS_HZ) /* Timeout for Flash Write */
 
 #define CONFIG_SPI_EEPROM      /* Support for SPI EEPROMs (AT25128) */
 #define CONFIG_MW_EEPROM       /* Support for MicroWire EEPROMs (AT93LC46) */
@@ -139,10 +144,10 @@
 #define CONFIG_ENV_OVERWRITE
 
 /* Environment in EEPROM */
-#define CFG_ENV_IS_IN_EEPROM   1
+#define CONFIG_ENV_IS_IN_EEPROM   1
 #define CONFIG_SPI
-#define CFG_ENV_SIZE	       0x4000	/* Total Size of Environment EEPROM 16k is SPI is used or 128 bytes if MW is used*/
-#define CFG_ENV_OFFSET         0
+#define CONFIG_ENV_SIZE	       0x4000	/* Total Size of Environment EEPROM 16k is SPI is used or 128 bytes if MW is used*/
+#define CONFIG_ENV_OFFSET         0
 #define CONFIG_SC520_CDP_USE_SPI  /* Store configuration in the SPI part */
 #undef CONFIG_SC520_CDP_USE_MW    /* Store configuration in the MicroWire part */
 #define CONFIG_SPI_X 1
@@ -175,10 +180,18 @@
 /************************************************************
 *SATA/Native Stuff
 ************************************************************/
-#define CFG_SATA_MAXBUS         2       /*Max Sata buses supported */
-#define CFG_SATA_DEVS_PER_BUS   2      /*Max no. of devices per bus/port */
-#define CFG_SATA_MAX_DEVICE     (CFG_SATA_MAXBUS* CFG_SATA_DEVS_PER_BUS)
+#ifndef GRUSS_TESTING
+#define CONFIG_SYS_SATA_MAXBUS         2       /*Max Sata buses supported */
+#define CONFIG_SYS_SATA_DEVS_PER_BUS   2      /*Max no. of devices per bus/port */
+#define CONFIG_SYS_SATA_MAX_DEVICE     (CONFIG_SYS_SATA_MAXBUS* CONFIG_SYS_SATA_DEVS_PER_BUS)
 #define CONFIG_ATA_PIIX		1       /*Supports ata_piix driver */
+#else
+#undef CONFIG_SYS_SATA_MAXBUS
+#undef CONFIG_SYS_SATA_DEVS_PER_BUS
+#undef CONFIG_SYS_SATA_MAX_DEVICE
+#undef CONFIG_ATA_PIIX
+#endif
+
 
 /************************************************************
  * DISK Partition support
@@ -190,9 +203,13 @@
 /************************************************************
  * Video/Keyboard support
  ************************************************************/
+#ifndef GRUSS_TESTING
 #define CONFIG_VIDEO			/* To enable video controller support */
+#else
+#undef CONFIG_VIDEO
+#endif
 #define CONFIG_I8042_KBD
-#define CFG_ISA_IO 0
+#define CONFIG_SYS_ISA_IO 0
 
 /************************************************************
  * RTC
@@ -203,13 +220,20 @@
 /*
  * PCI stuff
  */
+#ifndef GRUSS_TESTING
 #define CONFIG_PCI                                /* include pci support */
 #define CONFIG_PCI_PNP                            /* pci plug-and-play */
 #define CONFIG_PCI_SCAN_SHOW
 
-#define	CFG_FIRST_PCI_IRQ   10
-#define	CFG_SECOND_PCI_IRQ  9
-#define CFG_THIRD_PCI_IRQ   11
-#define	CFG_FORTH_PCI_IRQ   15
+#define	CONFIG_SYS_FIRST_PCI_IRQ   10
+#define	CONFIG_SYS_SECOND_PCI_IRQ  9
+#define CONFIG_SYS_THIRD_PCI_IRQ   11
+#define	CONFIG_SYS_FORTH_PCI_IRQ   15
+#else
+#undef CONFIG_PCI
+#undef CONFIG_PCI_PNP
+#undef CONFIG_PCI_SCAN_SHOW
+#endif
+
 
 #endif	/* __CONFIG_H */
diff --git a/include/configs/sc520_spunk.h b/include/configs/sc520_spunk.h
index 072675b0b..fbdbeddf6 100644
--- a/include/configs/sc520_spunk.h
+++ b/include/configs/sc520_spunk.h
@@ -36,22 +36,22 @@
 #define CONFIG_X86		1	/* This is a X86 CPU		*/
 #define CONFIG_SC520		1	/* Include support for AMD SC520 */
 
-#define CFG_SDRAM_PRECHARGE_DELAY 6     /* 6T */
-#define CFG_SDRAM_REFRESH_RATE    78    /* 7.8uS (choices are 7.8, 15.6, 31.2 or 62.5uS) */
-#define CFG_SDRAM_RAS_CAS_DELAY   3     /* 3T */
+#define CONFIG_SYS_SDRAM_PRECHARGE_DELAY 6     /* 6T */
+#define CONFIG_SYS_SDRAM_REFRESH_RATE    78    /* 7.8uS (choices are 7.8, 15.6, 31.2 or 62.5uS) */
+#define CONFIG_SYS_SDRAM_RAS_CAS_DELAY   3     /* 3T */
 
 /* define at most one of these */
-#undef CFG_SDRAM_CAS_LATENCY_2T
-#define CFG_SDRAM_CAS_LATENCY_3T
+#undef CONFIG_SYS_SDRAM_CAS_LATENCY_2T
+#define CONFIG_SYS_SDRAM_CAS_LATENCY_3T
 
-#define CFG_SC520_HIGH_SPEED    0       /* 100 or 133MHz */
-#define CFG_RESET_GENERIC       1       /* use tripple-fault to reset cpu */
-#undef  CFG_RESET_SC520                 /* use SC520 MMCR's to reset cpu */
-#undef  CFG_TIMER_SC520                 /* use SC520 swtimers */
-#define CFG_TIMER_GENERIC       1       /* use the i8254 PIT timers */
-#undef  CFG_TIMER_TSC                   /* use the Pentium TSC timers */
+#define CONFIG_SYS_SC520_HIGH_SPEED    0       /* 100 or 133MHz */
+#define CONFIG_SYS_RESET_GENERIC       1       /* use tripple-fault to reset cpu */
+#undef  CONFIG_SYS_RESET_SC520                 /* use SC520 MMCR's to reset cpu */
+#undef  CONFIG_SYS_TIMER_SC520                 /* use SC520 swtimers */
+#define CONFIG_SYS_TIMER_GENERIC       1       /* use the i8254 PIT timers */
+#undef  CONFIG_SYS_TIMER_TSC                   /* use the Pentium TSC timers */
 
-#define CFG_STACK_SIZE          0x8000  /* Size of bootloader stack */
+#define CONFIG_SYS_STACK_SIZE          0x8000  /* Size of bootloader stack */
 
 #define CONFIG_SHOW_BOOT_PROGRESS 1
 #define CONFIG_LAST_STAGE_INIT    1
@@ -59,7 +59,7 @@
 /*
  * Size of malloc() pool
  */
-#define CONFIG_MALLOC_SIZE	(CFG_ENV_SIZE + 128*1024)
+#define CONFIG_MALLOC_SIZE	(CONFIG_ENV_SIZE + 128*1024)
 
 
 #define CONFIG_BAUDRATE		9600
@@ -104,24 +104,24 @@
 /*
  * Miscellaneous configurable options
  */
-#define	CFG_LONGHELP				/* undef to save memory		*/
-#define	CFG_PROMPT		"boot > "	/* Monitor Command Prompt	*/
-#define	CFG_CBSIZE		256		/* Console I/O Buffer Size	*/
-#define	CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define	CFG_MAXARGS		16		/* max number of command args	*/
-#define CFG_BARGSIZE		CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+#define	CONFIG_SYS_LONGHELP				/* undef to save memory		*/
+#define	CONFIG_SYS_PROMPT		"boot > "	/* Monitor Command Prompt	*/
+#define	CONFIG_SYS_CBSIZE		256		/* Console I/O Buffer Size	*/
+#define	CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define	CONFIG_SYS_MAXARGS		16		/* max number of command args	*/
+#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
 
-#define CFG_MEMTEST_START	0x00100000	/* memtest works on	*/
-#define CFG_MEMTEST_END		0x01000000	/* 1 ... 16 MB in DRAM	*/
+#define CONFIG_SYS_MEMTEST_START	0x00100000	/* memtest works on	*/
+#define CONFIG_SYS_MEMTEST_END		0x01000000	/* 1 ... 16 MB in DRAM	*/
 
-#undef  CFG_CLKS_IN_HZ		/* everything, incl board info, in Hz */
+#undef  CONFIG_SYS_CLKS_IN_HZ		/* everything, incl board info, in Hz */
 
-#define	CFG_LOAD_ADDR		0x100000	/* default load address	*/
+#define	CONFIG_SYS_LOAD_ADDR		0x100000	/* default load address	*/
 
-#define	CFG_HZ			1024		/* incrementer freq: 1kHz */
+#define	CONFIG_SYS_HZ			1024		/* incrementer freq: 1kHz */
 
 						/* valid baudrates */
-#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
 
 
 /*-----------------------------------------------------------------------
@@ -134,12 +134,12 @@
  */
 
 
-#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
-#define CFG_MAX_FLASH_SECT	512	/* max number of sectors on one chip	*/
+#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
+#define CONFIG_SYS_MAX_FLASH_SECT	512	/* max number of sectors on one chip	*/
 
 /* timeout values are in ticks */
-#define CFG_FLASH_ERASE_TOUT	(2*CFG_HZ) /* Timeout for Flash Erase */
-#define CFG_FLASH_WRITE_TOUT	(2*CFG_HZ) /* Timeout for Flash Write */
+#define CONFIG_SYS_FLASH_ERASE_TOUT	(2*CONFIG_SYS_HZ) /* Timeout for Flash Erase */
+#define CONFIG_SYS_FLASH_WRITE_TOUT	(2*CONFIG_SYS_HZ) /* Timeout for Flash Write */
 
 
 #define CONFIG_SPI_EEPROM       /* SPI EEPROMs such as AT25010 or AT25640 */
@@ -153,19 +153,19 @@
 
 #if 0
 /* Environment in flash */
-#define CFG_ENV_IS_IN_FLASH     1
-# define CFG_ENV_ADDR		(0x387a0000)	/* Addr of Environment Sector	*/
-# define CFG_ENV_SIZE		0x20000	/* Total Size of Environment Sector (or 0x10000) */
-# define CFG_ENV_OFFSET         0
+#define CONFIG_ENV_IS_IN_FLASH     1
+# define CONFIG_ENV_ADDR		(0x387a0000)	/* Addr of Environment Sector	*/
+# define CONFIG_ENV_SIZE		0x20000	/* Total Size of Environment Sector (or 0x10000) */
+# define CONFIG_ENV_OFFSET         0
 
 #else
 /* Environment in EEPROM */
 
-# define CFG_ENV_IS_IN_EEPROM   1
+# define CONFIG_ENV_IS_IN_EEPROM   1
 # define CONFIG_SPI
 # define CONFIG_SPI_X 1
-# define CFG_ENV_SIZE		0x2000	/* Total Size of Environment EEPROM	*/
-# define CFG_ENV_OFFSET         0x1c00
+# define CONFIG_ENV_SIZE		0x2000	/* Total Size of Environment EEPROM	*/
+# define CONFIG_ENV_OFFSET         0x1c00
 
 #endif
 
@@ -192,31 +192,31 @@
  */
 #define CONFIG_NET_MULTI        /* Multi ethernet cards support */
 #define CONFIG_EEPRO100
-#define CFG_RX_ETH_BUFFER	8               /* use 8 rx buffer on eepro100  */
+#define CONFIG_SYS_RX_ETH_BUFFER	8               /* use 8 rx buffer on eepro100  */
 
 /************************************************************
  * IDE/ATA stuff
  ************************************************************/
-#define CFG_IDE_MAXBUS		2   /* max. 2 IDE busses	*/
-#define CFG_IDE_MAXDEVICE	(CFG_IDE_MAXBUS*2) /* max. 2 drives per IDE bus */
-#define CFG_ATA_BASE_ADDR       0
-#define CFG_ATA_IDE0_OFFSET	0x01f0	/* ide0 offset */
-#define CFG_ATA_IDE1_OFFSET	0xe000	/* ide1 offset */
-#define CFG_ATA_DATA_OFFSET	0	/* data reg offset	*/
-#define CFG_ATA_REG_OFFSET	0	/* reg offset */
-#define CFG_ATA_ALT_OFFSET	0x200	/* alternate register offset */
+#define CONFIG_SYS_IDE_MAXBUS		2   /* max. 2 IDE busses	*/
+#define CONFIG_SYS_IDE_MAXDEVICE	(CONFIG_SYS_IDE_MAXBUS*2) /* max. 2 drives per IDE bus */
+#define CONFIG_SYS_ATA_BASE_ADDR       0
+#define CONFIG_SYS_ATA_IDE0_OFFSET	0x01f0	/* ide0 offset */
+#define CONFIG_SYS_ATA_IDE1_OFFSET	0xe000	/* ide1 offset */
+#define CONFIG_SYS_ATA_DATA_OFFSET	0	/* data reg offset	*/
+#define CONFIG_SYS_ATA_REG_OFFSET	0	/* reg offset */
+#define CONFIG_SYS_ATA_ALT_OFFSET	0x200	/* alternate register offset */
 
-#define CFG_FIRST_PCMCIA_BUS    1
+#define CONFIG_SYS_FIRST_PCMCIA_BUS    1
 
 #undef	CONFIG_IDE_LED			/* no led for ide supported	*/
 #undef  CONFIG_IDE_RESET		/* reset for ide unsupported...	*/
 #undef  CONFIG_IDE_RESET_ROUTINE	/* no special reset function */
 
 #define CONFIG_IDE_TI_CARDBUS
-#define CFG_PCMCIA_CIS_WIN          0x27f00000
-#define CFG_PCMCIA_CIS_WIN_SIZE     0x00100000
-#define CFG_PCMCIA_IO_WIN           0xe000
-#define CFG_PCMCIA_IO_WIN_SIZE      16
+#define CONFIG_SYS_PCMCIA_CIS_WIN          0x27f00000
+#define CONFIG_SYS_PCMCIA_CIS_WIN_SIZE     0x00100000
+#define CONFIG_SYS_PCMCIA_IO_WIN           0xe000
+#define CONFIG_SYS_PCMCIA_IO_WIN_SIZE      16
 
 /************************************************************
  * DISK Partition support
@@ -239,9 +239,9 @@
 #define CONFIG_PCI_PNP                            /* pci plug-and-play */
 #define CONFIG_PCI_SCAN_SHOW
 
-#define	CFG_FIRST_PCI_IRQ   9
-#define	CFG_SECOND_PCI_IRQ  10
-#define	CFG_THIRD_PCI_IRQ   11
-#define	CFG_FORTH_PCI_IRQ   12
+#define	CONFIG_SYS_FIRST_PCI_IRQ   9
+#define	CONFIG_SYS_SECOND_PCI_IRQ  10
+#define	CONFIG_SYS_THIRD_PCI_IRQ   11
+#define	CONFIG_SYS_FORTH_PCI_IRQ   12
 
 #endif	/* __CONFIG_H */
diff --git a/include/configs/scb9328.h b/include/configs/scb9328.h
index 4ae25adde..5971df72f 100644
--- a/include/configs/scb9328.h
+++ b/include/configs/scb9328.h
@@ -76,22 +76,22 @@
 /*
  * General options for u-boot. Modify to save memory foot print
  */
-#define CFG_LONGHELP				      /* undef saves memory  */
-#define CFG_PROMPT		"scb9328> "	      /* prompt string	     */
-#define CFG_CBSIZE		256		      /* console I/O buffer  */
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* print buffer size   */
-#define CFG_MAXARGS		16		      /* max command args    */
-#define CFG_BARGSIZE		CFG_CBSIZE	      /* boot args buf size  */
+#define CONFIG_SYS_LONGHELP				      /* undef saves memory  */
+#define CONFIG_SYS_PROMPT		"scb9328> "	      /* prompt string	     */
+#define CONFIG_SYS_CBSIZE		256		      /* console I/O buffer  */
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* print buffer size   */
+#define CONFIG_SYS_MAXARGS		16		      /* max command args    */
+#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	      /* boot args buf size  */
 
-#define CFG_MEMTEST_START	0x08100000	      /* memtest test area   */
-#define CFG_MEMTEST_END		0x08F00000
+#define CONFIG_SYS_MEMTEST_START	0x08100000	      /* memtest test area   */
+#define CONFIG_SYS_MEMTEST_END		0x08F00000
 
-#undef	CFG_CLKS_IN_HZ			     /* use HZ for freq. display     */
+#undef	CONFIG_SYS_CLKS_IN_HZ			     /* use HZ for freq. display     */
 
-#define CFG_HZ			3686400	     /* incrementer freq: 3.6864 MHz */
-#define CFG_CPUSPEED		0x141	     /* core clock - register value  */
+#define CONFIG_SYS_HZ			3686400	     /* incrementer freq: 3.6864 MHz */
+#define CONFIG_SYS_CPUSPEED		0x141	     /* core clock - register value  */
 
-#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
 #define CONFIG_BAUDRATE 115200
 /*
  * Definitions related to passing arguments to kernel.
@@ -105,10 +105,10 @@
 /*
  * Malloc pool need to host env + 128 Kb reserve for other allocations.
  */
-#define CFG_MALLOC_LEN		(CFG_ENV_SIZE + (128<<10) )
+#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + (128<<10) )
 
 
-#define CFG_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
 
 #define CONFIG_STACKSIZE	(120<<10)      /* stack size		     */
 
@@ -152,8 +152,8 @@
 
 /* 32MB */
 #ifdef SCB9328_FLASH_32M
-#define CFG_MAX_FLASH_BANKS		1	/* FLASH banks count (not chip count)*/
-#define CFG_MAX_FLASH_SECT		256	/* number of sector in FLASH bank    */
+#define CONFIG_SYS_MAX_FLASH_BANKS		1	/* FLASH banks count (not chip count)*/
+#define CONFIG_SYS_MAX_FLASH_SECT		256	/* number of sector in FLASH bank    */
 #define SCB9328_FLASH_BUS_WIDTH		2	/* we use 16 bit FLASH memory...     */
 #define SCB9328_FLASH_INTERLEAVE	1	/* ... made of 1 chip		     */
 #define SCB9328_FLASH_BANK_SIZE	 0x02000000	/* size of one flash bank	     */
@@ -163,8 +163,8 @@
 #else
 
 /* 16MB */
-#define CFG_MAX_FLASH_BANKS		1	/* FLASH banks count (not chip count)*/
-#define CFG_MAX_FLASH_SECT		128	/* number of sector in FLASH bank    */
+#define CONFIG_SYS_MAX_FLASH_BANKS		1	/* FLASH banks count (not chip count)*/
+#define CONFIG_SYS_MAX_FLASH_SECT		128	/* number of sector in FLASH bank    */
 #define SCB9328_FLASH_BUS_WIDTH		2	/* we use 16 bit FLASH memory...     */
 #define SCB9328_FLASH_INTERLEAVE	1	/* ... made of 1 chip		     */
 #define SCB9328_FLASH_BANK_SIZE	 0x01000000	/* size of one flash bank	     */
@@ -177,12 +177,12 @@
    is not so clear to me. In other words we can provide more informations
    to user, but this expects more complex flash handling we do not provide
    now.*/
-#undef	CFG_FLASH_CFI
+#undef	CONFIG_SYS_FLASH_CFI
 
-#define CFG_FLASH_ERASE_TOUT	(2*CFG_HZ)    /* timeout for Erase operation */
-#define CFG_FLASH_WRITE_TOUT	(2*CFG_HZ)    /* timeout for Write operation */
+#define CONFIG_SYS_FLASH_ERASE_TOUT	(2*CONFIG_SYS_HZ)    /* timeout for Erase operation */
+#define CONFIG_SYS_FLASH_WRITE_TOUT	(2*CONFIG_SYS_HZ)    /* timeout for Write operation */
 
-#define CFG_FLASH_BASE		SCB9328_FLASH_BASE
+#define CONFIG_SYS_FLASH_BASE		SCB9328_FLASH_BASE
 
 /*
  * This is setting for JFFS2 support in u-boot.
@@ -191,9 +191,9 @@
  * footprint.
  * NOTE: Enable CONFIG_CMD_JFFS2 for JFFS2 support.
  */
-#define CFG_JFFS2_FIRST_BANK		0
-#define CFG_JFFS2_FIRST_SECTOR		5
-#define CFG_JFFS2_NUM_BANKS		1
+#define CONFIG_SYS_JFFS2_FIRST_BANK		0
+#define CONFIG_SYS_JFFS2_FIRST_SECTOR		5
+#define CONFIG_SYS_JFFS2_NUM_BANKS		1
 
 /*
  * Environment setup. Definitions of monitor location and size with
@@ -210,14 +210,14 @@
 /* Setup for PA23 which is Reset Default PA23 but has to become
    CS5 */
 
-#define CFG_GPR_A_VAL		0x00800000
-#define CFG_GIUS_A_VAL		0x0043fffe
+#define CONFIG_SYS_GPR_A_VAL		0x00800000
+#define CONFIG_SYS_GIUS_A_VAL		0x0043fffe
 
-#define CFG_MONITOR_BASE	0x10000000
-#define CFG_MONITOR_LEN		0x20000		/* 128b ( 1 flash sector )  */
-#define CFG_ENV_IS_IN_FLASH	1
-#define CFG_ENV_ADDR		0x10020000	/* absolute address for now  */
-#define CFG_ENV_SIZE		0x20000
+#define CONFIG_SYS_MONITOR_BASE	0x10000000
+#define CONFIG_SYS_MONITOR_LEN		0x20000		/* 128b ( 1 flash sector )  */
+#define CONFIG_ENV_IS_IN_FLASH	1
+#define CONFIG_ENV_ADDR		0x10020000	/* absolute address for now  */
+#define CONFIG_ENV_SIZE		0x20000
 
 #define	 CONFIG_ENV_OVERWRITE  1		/* env is not writable now   */
 
@@ -231,30 +231,30 @@
  *   |	 OEA   |   OEN	 |   WEA   |   WEN   |	 CSA   |EBC| DSZ  | 0|SP|0|WP| 0 0|PA|CSEN|
  */
 
-#define CFG_CS0U_VAL 0x000F2000
-#define CFG_CS0L_VAL 0x11110d01
-#define CFG_CS1U_VAL 0x000F0a00
-#define CFG_CS1L_VAL 0x11110601
-#define CFG_CS2U_VAL 0x0
-#define CFG_CS2L_VAL 0x0
+#define CONFIG_SYS_CS0U_VAL 0x000F2000
+#define CONFIG_SYS_CS0L_VAL 0x11110d01
+#define CONFIG_SYS_CS1U_VAL 0x000F0a00
+#define CONFIG_SYS_CS1L_VAL 0x11110601
+#define CONFIG_SYS_CS2U_VAL 0x0
+#define CONFIG_SYS_CS2L_VAL 0x0
 
-#define CFG_CS3U_VAL 0x000FFFFF
-#define CFG_CS3L_VAL 0x00000303
+#define CONFIG_SYS_CS3U_VAL 0x000FFFFF
+#define CONFIG_SYS_CS3L_VAL 0x00000303
 
-#define CFG_CS4U_VAL 0x000F0a00
-#define CFG_CS4L_VAL 0x11110301
+#define CONFIG_SYS_CS4U_VAL 0x000F0a00
+#define CONFIG_SYS_CS4L_VAL 0x11110301
 
 /* CNC == 3 too long
-   #define CFG_CS5U_VAL 0x0000C210 */
+   #define CONFIG_SYS_CS5U_VAL 0x0000C210 */
 
-/* #define CFG_CS5U_VAL 0x00008400
+/* #define CONFIG_SYS_CS5U_VAL 0x00008400
    mal laenger mahcen, ob der bei 150MHz laenger haelt dann und
    kaum langsamer ist */
-/* #define CFG_CS5U_VAL 0x00009400
-   #define CFG_CS5L_VAL 0x11010D03 */
+/* #define CONFIG_SYS_CS5U_VAL 0x00009400
+   #define CONFIG_SYS_CS5L_VAL 0x11010D03 */
 
-#define CFG_CS5U_VAL 0x00008400
-#define CFG_CS5L_VAL 0x00000D03
+#define CONFIG_SYS_CS5U_VAL 0x00008400
+#define CONFIG_SYS_CS5L_VAL 0x00000D03
 
 #define CONFIG_DRIVER_DM9000		1
 #define CONFIG_DM9000_BASE		0x16000000
@@ -281,24 +281,24 @@
 #define CPU200
 
 #ifdef CPU200
-#define CFG_MPCTL0_VAL 0x00321431
+#define CONFIG_SYS_MPCTL0_VAL 0x00321431
 #else
-#define CFG_MPCTL0_VAL 0x040e200e
+#define CONFIG_SYS_MPCTL0_VAL 0x040e200e
 #endif
 
 /* #define BUS64 */
 #define BUS72
 
 #ifdef BUS72
-#define CFG_SPCTL0_VAL 0x04002400
+#define CONFIG_SYS_SPCTL0_VAL 0x04002400
 #endif
 
 #ifdef BUS96
-#define CFG_SPCTL0_VAL 0x04001800
+#define CONFIG_SYS_SPCTL0_VAL 0x04001800
 #endif
 
 #ifdef BUS64
-#define CFG_SPCTL0_VAL 0x08001800
+#define CONFIG_SYS_SPCTL0_VAL 0x08001800
 #endif
 
 /* Das ist der BCLK Divider, der aus der System PLL
@@ -312,11 +312,11 @@
    Bit 21: MPLL Restart */
 
 #ifdef BUS64
-#define CFG_CSCR_VAL 0x2f030003
+#define CONFIG_SYS_CSCR_VAL 0x2f030003
 #endif
 
 #ifdef BUS72
-#define CFG_CSCR_VAL 0x2f030403
+#define CONFIG_SYS_CSCR_VAL 0x2f030403
 #endif
 
 /*
@@ -324,7 +324,7 @@
  * one may expect. For instance loadb command do not cares :-)
  * So advice is - do not relay on this...
  */
-#define CFG_LOAD_ADDR 0x08400000
+#define CONFIG_SYS_LOAD_ADDR 0x08400000
 
 #define MHZ16QUARZINUSE
 
@@ -337,7 +337,7 @@
 #define CONFIG_SYS_CLK_FREQ 16780000
 
 /* FMCR Bit 0 becomes 0 to make CS3 CS3 :P */
-#define CFG_FMCR_VAL 0x00000001
+#define CONFIG_SYS_FMCR_VAL 0x00000001
 
 /* Bit[0:3] contain PERCLK1DIV for UART 1
    0x000b00b ->b<- -> 192MHz/12=16MHz
@@ -345,15 +345,15 @@
    0x000b00b ->3<- -> 64MHz/4=16MHz */
 
 #ifdef BUS96
-#define CFG_PCDR_VAL 0x000b00b5
+#define CONFIG_SYS_PCDR_VAL 0x000b00b5
 #endif
 
 #ifdef BUS64
-#define CFG_PCDR_VAL 0x000b00b3
+#define CONFIG_SYS_PCDR_VAL 0x000b00b3
 #endif
 
 #ifdef BUS72
-#define CFG_PCDR_VAL 0x000b00b8
+#define CONFIG_SYS_PCDR_VAL 0x000b00b8
 #endif
 
 #endif	/* __CONFIG_H */
diff --git a/include/configs/sequoia.h b/include/configs/sequoia.h
index 74f6e3a89..9321bdc07 100644
--- a/include/configs/sequoia.h
+++ b/include/configs/sequoia.h
@@ -48,7 +48,7 @@
 #include "amcc-common.h"
 
 /* Detect Sequoia PLL input clock automatically via CPLD bit		*/
-#define CONFIG_SYS_CLK_FREQ    ((in8(CFG_BCSR_BASE + 3) & 0x80) ? \
+#define CONFIG_SYS_CLK_FREQ    ((in8(CONFIG_SYS_BCSR_BASE + 3) & 0x80) ? \
 				33333333 : 33000000)
 
 /*
@@ -72,40 +72,40 @@
  * Base addresses -- Note these are effective addresses where the actual
  * resources get mapped (not physical addresses).
  */
-#define CFG_TLB_FOR_BOOT_FLASH	0x0003
-#define CFG_BOOT_BASE_ADDR	0xf0000000
-#define CFG_FLASH_BASE		0xfc000000	/* start of FLASH	*/
-#define CFG_NAND_ADDR		0xd0000000	/* NAND Flash		*/
-#define CFG_OCM_BASE		0xe0010000	/* ocm			*/
-#define CFG_OCM_DATA_ADDR	CFG_OCM_BASE
-#define CFG_PCI_BASE		0xe0000000	/* Internal PCI regs	*/
-#define CFG_PCI_MEMBASE		0x80000000	/* mapped pci memory	*/
-#define CFG_PCI_MEMBASE1	CFG_PCI_MEMBASE  + 0x10000000
-#define CFG_PCI_MEMBASE2	CFG_PCI_MEMBASE1 + 0x10000000
-#define CFG_PCI_MEMBASE3	CFG_PCI_MEMBASE2 + 0x10000000
+#define CONFIG_SYS_TLB_FOR_BOOT_FLASH	0x0003
+#define CONFIG_SYS_BOOT_BASE_ADDR	0xf0000000
+#define CONFIG_SYS_FLASH_BASE		0xfc000000	/* start of FLASH	*/
+#define CONFIG_SYS_NAND_ADDR		0xd0000000	/* NAND Flash		*/
+#define CONFIG_SYS_OCM_BASE		0xe0010000	/* ocm			*/
+#define CONFIG_SYS_OCM_DATA_ADDR	CONFIG_SYS_OCM_BASE
+#define CONFIG_SYS_PCI_BASE		0xe0000000	/* Internal PCI regs	*/
+#define CONFIG_SYS_PCI_MEMBASE		0x80000000	/* mapped pci memory	*/
+#define CONFIG_SYS_PCI_MEMBASE1	CONFIG_SYS_PCI_MEMBASE  + 0x10000000
+#define CONFIG_SYS_PCI_MEMBASE2	CONFIG_SYS_PCI_MEMBASE1 + 0x10000000
+#define CONFIG_SYS_PCI_MEMBASE3	CONFIG_SYS_PCI_MEMBASE2 + 0x10000000
 
 /* Don't change either of these */
-#define CFG_PERIPHERAL_BASE	0xef600000	/* internal peripherals	*/
+#define CONFIG_SYS_PERIPHERAL_BASE	0xef600000	/* internal peripherals	*/
 
-#define CFG_USB2D0_BASE		0xe0000100
-#define CFG_USB_DEVICE		0xe0000000
-#define CFG_USB_HOST		0xe0000400
-#define CFG_BCSR_BASE		0xc0000000
+#define CONFIG_SYS_USB2D0_BASE		0xe0000100
+#define CONFIG_SYS_USB_DEVICE		0xe0000000
+#define CONFIG_SYS_USB_HOST		0xe0000400
+#define CONFIG_SYS_BCSR_BASE		0xc0000000
 
 /*
  * Initial RAM & stack pointer
  */
 /* 440EPx/440GRx have 16KB of internal SRAM, so no need for D-Cache	*/
-#define CFG_INIT_RAM_ADDR	CFG_OCM_BASE	/* OCM			*/
-#define CFG_INIT_RAM_END	(4 << 10)
-#define CFG_GBL_DATA_SIZE	256	/* num bytes initial data	*/
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP_OFFSET	CFG_POST_WORD_ADDR
+#define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_OCM_BASE	/* OCM			*/
+#define CONFIG_SYS_INIT_RAM_END	(4 << 10)
+#define CONFIG_SYS_GBL_DATA_SIZE	256	/* num bytes initial data	*/
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_POST_WORD_ADDR
 
 /*
  * Serial Port
  */
-#define CFG_EXT_SERIAL_CLOCK	11059200	/* ext. 11.059MHz clk	*/
+#define CONFIG_SYS_EXT_SERIAL_CLOCK	11059200	/* ext. 11.059MHz clk	*/
 /* define this if you want console on UART1 */
 #undef CONFIG_UART1_CONSOLE
 
@@ -113,40 +113,40 @@
  * Environment
  */
 #if !defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL)
-#define CFG_ENV_IS_IN_FLASH	1	/* use FLASH for environ vars	*/
+#define CONFIG_ENV_IS_IN_FLASH	1	/* use FLASH for environ vars	*/
 #else
-#define CFG_ENV_IS_IN_NAND	1	/* use NAND for environ vars	*/
-#define CFG_ENV_IS_EMBEDDED	1	/* use embedded environment	*/
+#define CONFIG_ENV_IS_IN_NAND	1	/* use NAND for environ vars	*/
+#define CONFIG_ENV_IS_EMBEDDED	1	/* use embedded environment	*/
 #endif
 
 /*
  * FLASH related
  */
-#define CFG_FLASH_CFI			/* The flash is CFI compatible	*/
+#define CONFIG_SYS_FLASH_CFI			/* The flash is CFI compatible	*/
 #define CONFIG_FLASH_CFI_DRIVER		/* Use common CFI driver	*/
 
-#define CFG_FLASH_BANKS_LIST	{ CFG_FLASH_BASE }
+#define CONFIG_SYS_FLASH_BANKS_LIST	{ CONFIG_SYS_FLASH_BASE }
 
-#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks	      */
-#define CFG_MAX_FLASH_SECT	512	/* max number of sectors on one chip  */
+#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks	      */
+#define CONFIG_SYS_MAX_FLASH_SECT	512	/* max number of sectors on one chip  */
 
-#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)    */
-#define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)    */
+#define CONFIG_SYS_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)    */
+#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)    */
 
-#define CFG_FLASH_USE_BUFFER_WRITE 1	/* use buffered writes (20x faster)   */
-#define CFG_FLASH_PROTECTION	1	/* use hardware flash protection      */
+#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1	/* use buffered writes (20x faster)   */
+#define CONFIG_SYS_FLASH_PROTECTION	1	/* use hardware flash protection      */
 
-#define CFG_FLASH_EMPTY_INFO	      /* print 'E' for empty sector on flinfo */
-#define CFG_FLASH_QUIET_TEST	1	/* don't warn upon unknown flash      */
+#define CONFIG_SYS_FLASH_EMPTY_INFO	      /* print 'E' for empty sector on flinfo */
+#define CONFIG_SYS_FLASH_QUIET_TEST	1	/* don't warn upon unknown flash      */
 
-#ifdef CFG_ENV_IS_IN_FLASH
-#define CFG_ENV_SECT_SIZE	0x20000	/* size of one complete sector	      */
-#define CFG_ENV_ADDR		((-CFG_MONITOR_LEN)-CFG_ENV_SECT_SIZE)
-#define	CFG_ENV_SIZE		0x2000	/* Total Size of Environment Sector   */
+#ifdef CONFIG_ENV_IS_IN_FLASH
+#define CONFIG_ENV_SECT_SIZE	0x20000	/* size of one complete sector	      */
+#define CONFIG_ENV_ADDR		((-CONFIG_SYS_MONITOR_LEN)-CONFIG_ENV_SECT_SIZE)
+#define	CONFIG_ENV_SIZE		0x2000	/* Total Size of Environment Sector   */
 
 /* Address and size of Redundant Environment Sector	*/
-#define CFG_ENV_ADDR_REDUND	(CFG_ENV_ADDR-CFG_ENV_SECT_SIZE)
-#define CFG_ENV_SIZE_REDUND	(CFG_ENV_SIZE)
+#define CONFIG_ENV_ADDR_REDUND	(CONFIG_ENV_ADDR-CONFIG_ENV_SECT_SIZE)
+#define CONFIG_ENV_SIZE_REDUND	(CONFIG_ENV_SIZE)
 #endif
 
 /*
@@ -167,75 +167,74 @@
  * set up. While still running from cache, I experienced problems accessing
  * the NAND controller.	sr - 2006-08-25
  */
-#define CFG_NAND_BOOT_SPL_SRC	0xfffff000	/* SPL location		      */
-#define CFG_NAND_BOOT_SPL_SIZE	(4 << 10)	/* SPL size		      */
-#define CFG_NAND_BOOT_SPL_DST	(CFG_OCM_BASE + (12 << 10)) /* Copy SPL here  */
-#define CFG_NAND_U_BOOT_DST	0x01000000	/* Load NUB to this addr      */
-#define CFG_NAND_U_BOOT_START	CFG_NAND_U_BOOT_DST	/* Start NUB from     */
+#define CONFIG_SYS_NAND_BOOT_SPL_SRC	0xfffff000	/* SPL location		      */
+#define CONFIG_SYS_NAND_BOOT_SPL_SIZE	(4 << 10)	/* SPL size		      */
+#define CONFIG_SYS_NAND_BOOT_SPL_DST	(CONFIG_SYS_OCM_BASE + (12 << 10)) /* Copy SPL here  */
+#define CONFIG_SYS_NAND_U_BOOT_DST	0x01000000	/* Load NUB to this addr      */
+#define CONFIG_SYS_NAND_U_BOOT_START	CONFIG_SYS_NAND_U_BOOT_DST	/* Start NUB from     */
 							/*   this addr	      */
-#define CFG_NAND_BOOT_SPL_DELTA	(CFG_NAND_BOOT_SPL_SRC - CFG_NAND_BOOT_SPL_DST)
+#define CONFIG_SYS_NAND_BOOT_SPL_DELTA	(CONFIG_SYS_NAND_BOOT_SPL_SRC - CONFIG_SYS_NAND_BOOT_SPL_DST)
 
 /*
  * Define the partitioning of the NAND chip (only RAM U-Boot is needed here)
  */
-#define CFG_NAND_U_BOOT_OFFS	(16 << 10)	/* Offset to RAM U-Boot image */
-#define CFG_NAND_U_BOOT_SIZE	(512 << 10)	/* Size of RAM U-Boot image   */
+#define CONFIG_SYS_NAND_U_BOOT_OFFS	(16 << 10)	/* Offset to RAM U-Boot image */
+#define CONFIG_SYS_NAND_U_BOOT_SIZE	(512 << 10)	/* Size of RAM U-Boot image   */
 
 /*
  * Now the NAND chip has to be defined (no autodetection used!)
  */
-#define CFG_NAND_PAGE_SIZE	512		/* NAND chip page size	      */
-#define CFG_NAND_BLOCK_SIZE	(16 << 10)	/* NAND chip block size	      */
-#define CFG_NAND_PAGE_COUNT	32		/* NAND chip page count	      */
-#define CFG_NAND_BAD_BLOCK_POS	5	      /* Location of bad block marker */
-#undef CFG_NAND_4_ADDR_CYCLE		      /* No fourth addr used (<=32MB) */
-
-#define CFG_NAND_ECCSIZE	256
-#define CFG_NAND_ECCBYTES	3
-#define CFG_NAND_ECCSTEPS	(CFG_NAND_PAGE_SIZE / CFG_NAND_ECCSIZE)
-#define CFG_NAND_OOBSIZE	16
-#define CFG_NAND_ECCTOTAL	(CFG_NAND_ECCBYTES * CFG_NAND_ECCSTEPS)
-#define CFG_NAND_ECCPOS		{0, 1, 2, 3, 6, 7}
-
-#ifdef CFG_ENV_IS_IN_NAND
+#define CONFIG_SYS_NAND_PAGE_SIZE	512		/* NAND chip page size	      */
+#define CONFIG_SYS_NAND_BLOCK_SIZE	(16 << 10)	/* NAND chip block size	      */
+#define CONFIG_SYS_NAND_PAGE_COUNT	32		/* NAND chip page count	      */
+#define CONFIG_SYS_NAND_BAD_BLOCK_POS	5	      /* Location of bad block marker */
+#undef CONFIG_SYS_NAND_4_ADDR_CYCLE		      /* No fourth addr used (<=32MB) */
+
+#define CONFIG_SYS_NAND_ECCSIZE	256
+#define CONFIG_SYS_NAND_ECCBYTES	3
+#define CONFIG_SYS_NAND_ECCSTEPS	(CONFIG_SYS_NAND_PAGE_SIZE / CONFIG_SYS_NAND_ECCSIZE)
+#define CONFIG_SYS_NAND_OOBSIZE	16
+#define CONFIG_SYS_NAND_ECCTOTAL	(CONFIG_SYS_NAND_ECCBYTES * CONFIG_SYS_NAND_ECCSTEPS)
+#define CONFIG_SYS_NAND_ECCPOS		{0, 1, 2, 3, 6, 7}
+
+#ifdef CONFIG_ENV_IS_IN_NAND
 /*
  * For NAND booting the environment is embedded in the U-Boot image. Please take
  * look at the file board/amcc/sequoia/u-boot-nand.lds for details.
  */
-#define CFG_ENV_SIZE		CFG_NAND_BLOCK_SIZE
-#define CFG_ENV_OFFSET		(CFG_NAND_U_BOOT_OFFS + CFG_ENV_SIZE)
-#define CFG_ENV_OFFSET_REDUND	(CFG_ENV_OFFSET + CFG_ENV_SIZE)
+#define CONFIG_ENV_SIZE		CONFIG_SYS_NAND_BLOCK_SIZE
+#define CONFIG_ENV_OFFSET		(CONFIG_SYS_NAND_U_BOOT_OFFS + CONFIG_ENV_SIZE)
+#define CONFIG_ENV_OFFSET_REDUND	(CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)
 #endif
 
 /*
  * DDR SDRAM
  */
-#define CFG_MBYTES_SDRAM        (256)	/* 256MB			*/
+#define CONFIG_SYS_MBYTES_SDRAM        (256)	/* 256MB			*/
 #if !defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL)
 #define CONFIG_DDR_DATA_EYE		/* use DDR2 optimization	*/
 #endif
-#define CFG_MEM_TOP_HIDE	(4 << 10) /* don't use last 4kbytes	*/
+#define CONFIG_SYS_MEM_TOP_HIDE	(4 << 10) /* don't use last 4kbytes	*/
 					/* 440EPx errata CHIP 11	*/
 
 /*
  * I2C
  */
-#define CFG_I2C_SPEED		400000	/* I2C speed and slave address	*/
+#define CONFIG_SYS_I2C_SPEED		400000	/* I2C speed and slave address	*/
 
-#define CFG_I2C_MULTI_EEPROMS
-#define CFG_I2C_EEPROM_ADDR	(0xa8>>1)
-#define CFG_I2C_EEPROM_ADDR_LEN 1
-#define CFG_EEPROM_PAGE_WRITE_ENABLE
-#define CFG_EEPROM_PAGE_WRITE_BITS 3
-#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10
+#define CONFIG_SYS_I2C_MULTI_EEPROMS
+#define CONFIG_SYS_I2C_EEPROM_ADDR	(0xa8>>1)
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10
 
 /* I2C SYSMON (LM75, AD7414 is almost compatible)			*/
 #define CONFIG_DTT_LM75		1	/* ON Semi's LM75		*/
 #define CONFIG_DTT_AD7414	1	/* use AD7414			*/
 #define CONFIG_DTT_SENSORS	{0}	/* Sensor addresses		*/
-#define CFG_DTT_MAX_TEMP	70
-#define CFG_DTT_LOW_TEMP	-30
-#define CFG_DTT_HYSTERESIS	3
+#define CONFIG_SYS_DTT_MAX_TEMP	70
+#define CONFIG_SYS_DTT_LOW_TEMP	-30
+#define CONFIG_SYS_DTT_HYSTERESIS	3
 
 /*
  * Default environment variables
@@ -265,13 +264,13 @@
 #ifdef CONFIG_440EPX
 #define CONFIG_USB_OHCI_NEW
 #define CONFIG_USB_STORAGE
-#define CFG_OHCI_BE_CONTROLLER
+#define CONFIG_SYS_OHCI_BE_CONTROLLER
 
-#undef CFG_USB_OHCI_BOARD_INIT
-#define CFG_USB_OHCI_CPU_INIT	1
-#define CFG_USB_OHCI_REGS_BASE	CFG_USB_HOST
-#define CFG_USB_OHCI_SLOT_NAME	"ppc440"
-#define CFG_USB_OHCI_MAX_ROOT_PORTS 15
+#undef CONFIG_SYS_USB_OHCI_BOARD_INIT
+#define CONFIG_SYS_USB_OHCI_CPU_INIT	1
+#define CONFIG_SYS_USB_OHCI_REGS_BASE	CONFIG_SYS_USB_HOST
+#define CONFIG_SYS_USB_OHCI_SLOT_NAME	"ppc440"
+#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 15
 
 /* Comment this out to enable USB 1.1 device */
 #define USB_2_0_DEVICE
@@ -297,26 +296,26 @@
 #endif
 
 #ifndef CONFIG_RAINIER
-#define CFG_POST_FPU_ON		CFG_POST_FPU
+#define CONFIG_SYS_POST_FPU_ON		CONFIG_SYS_POST_FPU
 #else
-#define CFG_POST_FPU_ON		0
+#define CONFIG_SYS_POST_FPU_ON		0
 #endif
 
 /* POST support */
-#define CONFIG_POST		(CFG_POST_CACHE	   | \
-				 CFG_POST_CPU	   | \
-				 CFG_POST_ETHER	   | \
-				 CFG_POST_FPU_ON   | \
-				 CFG_POST_I2C	   | \
-				 CFG_POST_MEMORY   | \
-				 CFG_POST_SPR	   | \
-				 CFG_POST_UART)
-
-#define CFG_POST_WORD_ADDR	(CFG_GBL_DATA_OFFSET - 0x4)
+#define CONFIG_POST		(CONFIG_SYS_POST_CACHE	   | \
+				 CONFIG_SYS_POST_CPU	   | \
+				 CONFIG_SYS_POST_ETHER	   | \
+				 CONFIG_SYS_POST_FPU_ON   | \
+				 CONFIG_SYS_POST_I2C	   | \
+				 CONFIG_SYS_POST_MEMORY   | \
+				 CONFIG_SYS_POST_SPR	   | \
+				 CONFIG_SYS_POST_UART)
+
+#define CONFIG_SYS_POST_WORD_ADDR	(CONFIG_SYS_GBL_DATA_OFFSET - 0x4)
 #define CONFIG_LOGBUFFER
-#define CFG_POST_CACHE_ADDR	0x7fff0000	/* free virtual address     */
+#define CONFIG_SYS_POST_CACHE_ADDR	0x7fff0000	/* free virtual address     */
 
-#define CFG_CONSOLE_IS_IN_ENV	/* Otherwise it catches logbuffer as output */
+#define CONFIG_SYS_CONSOLE_IS_IN_ENV	/* Otherwise it catches logbuffer as output */
 
 #define CONFIG_SUPPORT_VFAT
 
@@ -326,16 +325,16 @@
 /* General PCI */
 #define CONFIG_PCI			/* include pci support		*/
 #define CONFIG_PCI_PNP			/* do pci plug-and-play		*/
-#define CFG_PCI_CACHE_LINE_SIZE	0	/* to avoid problems with PNP	*/
+#define CONFIG_SYS_PCI_CACHE_LINE_SIZE	0	/* to avoid problems with PNP	*/
 #define CONFIG_PCI_SCAN_SHOW		/* show pci devices on startup	*/
-#define CFG_PCI_TARGBASE	0x80000000	/* PCIaddr mapped to	*/
-						/*   CFG_PCI_MEMBASE	*/
+#define CONFIG_SYS_PCI_TARGBASE	0x80000000	/* PCIaddr mapped to	*/
+						/*   CONFIG_SYS_PCI_MEMBASE	*/
 /* Board-specific PCI */
-#define CFG_PCI_TARGET_INIT
-#define CFG_PCI_MASTER_INIT
+#define CONFIG_SYS_PCI_TARGET_INIT
+#define CONFIG_SYS_PCI_MASTER_INIT
 
-#define CFG_PCI_SUBSYS_VENDORID 0x10e8	/* AMCC				*/
-#define CFG_PCI_SUBSYS_ID       0xcafe	/* Whatever			*/
+#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x10e8	/* AMCC				*/
+#define CONFIG_SYS_PCI_SUBSYS_ID       0xcafe	/* Whatever			*/
 
 /*
  * External Bus Controller (EBC) Setup
@@ -345,44 +344,44 @@
  * On Sequoia CS0 and CS3 are switched when configuring for NAND booting
  */
 #if !defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL)
-#define CFG_NAND_CS		3	/* NAND chip connected to CSx	*/
+#define CONFIG_SYS_NAND_CS		3	/* NAND chip connected to CSx	*/
 /* Memory Bank 0 (NOR-FLASH) initialization				*/
-#define CFG_EBC_PB0AP		0x03017200
-#define CFG_EBC_PB0CR		(CFG_FLASH_BASE | 0xda000)
+#define CONFIG_SYS_EBC_PB0AP		0x03017200
+#define CONFIG_SYS_EBC_PB0CR		(CONFIG_SYS_FLASH_BASE | 0xda000)
 
 /* Memory Bank 3 (NAND-FLASH) initialization				*/
-#define CFG_EBC_PB3AP		0x018003c0
-#define CFG_EBC_PB3CR		(CFG_NAND_ADDR | 0x1c000)
+#define CONFIG_SYS_EBC_PB3AP		0x018003c0
+#define CONFIG_SYS_EBC_PB3CR		(CONFIG_SYS_NAND_ADDR | 0x1c000)
 #else
-#define CFG_NAND_CS		0	/* NAND chip connected to CSx	*/
+#define CONFIG_SYS_NAND_CS		0	/* NAND chip connected to CSx	*/
 /* Memory Bank 3 (NOR-FLASH) initialization				*/
-#define CFG_EBC_PB3AP		0x03017200
-#define CFG_EBC_PB3CR		(CFG_FLASH_BASE | 0xda000)
+#define CONFIG_SYS_EBC_PB3AP		0x03017200
+#define CONFIG_SYS_EBC_PB3CR		(CONFIG_SYS_FLASH_BASE | 0xda000)
 
 /* Memory Bank 0 (NAND-FLASH) initialization				*/
-#define CFG_EBC_PB0AP		0x018003c0
-#define CFG_EBC_PB0CR		(CFG_NAND_ADDR | 0x1c000)
+#define CONFIG_SYS_EBC_PB0AP		0x018003c0
+#define CONFIG_SYS_EBC_PB0CR		(CONFIG_SYS_NAND_ADDR | 0x1c000)
 #endif
 
 /* Memory Bank 2 (CPLD) initialization					*/
-#define CFG_EBC_PB2AP		0x24814580
-#define CFG_EBC_PB2CR		(CFG_BCSR_BASE | 0x38000)
+#define CONFIG_SYS_EBC_PB2AP		0x24814580
+#define CONFIG_SYS_EBC_PB2CR		(CONFIG_SYS_BCSR_BASE | 0x38000)
 
-#define CFG_BCSR5_PCI66EN	0x80
+#define CONFIG_SYS_BCSR5_PCI66EN	0x80
 
 /*
  * NAND FLASH
  */
-#define CFG_MAX_NAND_DEVICE	1
+#define CONFIG_SYS_MAX_NAND_DEVICE	1
 #define NAND_MAX_CHIPS		1
-#define CFG_NAND_BASE		(CFG_NAND_ADDR + CFG_NAND_CS)
-#define CFG_NAND_SELECT_DEVICE  1	/* nand driver supports mutipl. chips */
+#define CONFIG_SYS_NAND_BASE		(CONFIG_SYS_NAND_ADDR + CONFIG_SYS_NAND_CS)
+#define CONFIG_SYS_NAND_SELECT_DEVICE  1	/* nand driver supports mutipl. chips */
 
 /*
  * PPC440 GPIO Configuration
  */
 /* test-only: take GPIO init from pcs440ep ???? in config file */
-#define CFG_4xx_GPIO_TABLE { /*	  Out		  GPIO	Alternate1	Alternate2	Alternate3 */ \
+#define CONFIG_SYS_4xx_GPIO_TABLE { /*	  Out		  GPIO	Alternate1	Alternate2	Alternate3 */ \
 {											\
 /* GPIO Core 0 */									\
 {GPIO0_BASE, GPIO_BI , GPIO_ALT1, GPIO_OUT_0}, /* GPIO0	EBC_ADDR(7)	DMA_REQ(2)	*/	\
@@ -459,7 +458,7 @@
 #define CONFIG_BIOSEMU			/* x86 bios emulator for vga bios */
 #define CONFIG_ATI_RADEON_FB		/* use radeon framebuffer driver */
 #define VIDEO_IO_OFFSET			0xe8000000
-#define CFG_ISA_IO_BASE_ADDRESS		VIDEO_IO_OFFSET
+#define CONFIG_SYS_ISA_IO_BASE_ADDRESS		VIDEO_IO_OFFSET
 #define CONFIG_VIDEO_SW_CURSOR
 #define CONFIG_VIDEO_LOGO
 #define CONFIG_CFB_CONSOLE
diff --git a/include/configs/sh7763rdp.h b/include/configs/sh7763rdp.h
index 1306702fc..8a76dad5d 100644
--- a/include/configs/sh7763rdp.h
+++ b/include/configs/sh7763rdp.h
@@ -56,66 +56,66 @@
 #define CONFIG_BAUDRATE         115200
 #define CONFIG_CONS_SCIF2		1
 
-#define CFG_LONGHELP		/* undef to save memory */
-#define CFG_PROMPT		"=> "	/* Monitor Command Prompt */
-#define CFG_CBSIZE		256	/* Buffer size for input from the Console */
-#define CFG_PBSIZE		256	/* Buffer size for Console output */
-#define CFG_MAXARGS		16	/* max args accepted for monitor commands */
-#define CFG_BARGSIZE	512	/* Buffer size for Boot Arguments
+#define CONFIG_SYS_LONGHELP		/* undef to save memory */
+#define CONFIG_SYS_PROMPT		"=> "	/* Monitor Command Prompt */
+#define CONFIG_SYS_CBSIZE		256	/* Buffer size for input from the Console */
+#define CONFIG_SYS_PBSIZE		256	/* Buffer size for Console output */
+#define CONFIG_SYS_MAXARGS		16	/* max args accepted for monitor commands */
+#define CONFIG_SYS_BARGSIZE	512	/* Buffer size for Boot Arguments
 								passed to kernel */
-#define CFG_BAUDRATE_TABLE	{ 115200 }	/* List of legal baudrate
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 115200 }	/* List of legal baudrate
 												settings for this board */
 
 /* SDRAM */
-#define CFG_SDRAM_BASE		(0x8C000000)
-#define CFG_SDRAM_SIZE		(64 * 1024 * 1024)
-#define CFG_MEMTEST_START	(CFG_SDRAM_BASE)
-#define CFG_MEMTEST_END		(CFG_MEMTEST_START + (60 * 1024 * 1024))
+#define CONFIG_SYS_SDRAM_BASE		(0x8C000000)
+#define CONFIG_SYS_SDRAM_SIZE		(64 * 1024 * 1024)
+#define CONFIG_SYS_MEMTEST_START	(CONFIG_SYS_SDRAM_BASE)
+#define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_MEMTEST_START + (60 * 1024 * 1024))
 
 /* Flash(NOR) */
-#define CFG_FLASH_BASE		(0xA0000000)
-#define CFG_FLASH_CFI_WIDTH (FLASH_CFI_16BIT)
-#define CFG_MAX_FLASH_BANKS (1)
-#define CFG_MAX_FLASH_SECT  (520)
+#define CONFIG_SYS_FLASH_BASE		(0xA0000000)
+#define CONFIG_SYS_FLASH_CFI_WIDTH (FLASH_CFI_16BIT)
+#define CONFIG_SYS_MAX_FLASH_BANKS (1)
+#define CONFIG_SYS_MAX_FLASH_SECT  (520)
 
 /* U-boot setting */
-#define CFG_LOAD_ADDR		(CFG_SDRAM_BASE + 4 * 1024 * 1024)
-#define CFG_MONITOR_BASE	(CFG_FLASH_BASE)
-#define CFG_MONITOR_LEN		(128 * 1024)
+#define CONFIG_SYS_LOAD_ADDR		(CONFIG_SYS_SDRAM_BASE + 4 * 1024 * 1024)
+#define CONFIG_SYS_MONITOR_BASE	(CONFIG_SYS_FLASH_BASE)
+#define CONFIG_SYS_MONITOR_LEN		(128 * 1024)
 /* Size of DRAM reserved for malloc() use */
-#define CFG_MALLOC_LEN		(1024 * 1024)
+#define CONFIG_SYS_MALLOC_LEN		(1024 * 1024)
 /* size in bytes reserved for initial data */
-#define CFG_GBL_DATA_SIZE	(256)
-#define CFG_BOOTMAPSZ		(8 * 1024 * 1024)
+#define CONFIG_SYS_GBL_DATA_SIZE	(256)
+#define CONFIG_SYS_BOOTMAPSZ		(8 * 1024 * 1024)
 
-#define CFG_FLASH_CFI
+#define CONFIG_SYS_FLASH_CFI
 #define CONFIG_FLASH_CFI_DRIVER
-#undef  CFG_FLASH_QUIET_TEST
-#define CFG_FLASH_EMPTY_INFO	/* print 'E' for empty sector on flinfo */
+#undef  CONFIG_SYS_FLASH_QUIET_TEST
+#define CONFIG_SYS_FLASH_EMPTY_INFO	/* print 'E' for empty sector on flinfo */
 /* Timeout for Flash erase operations (in ms) */
-#define CFG_FLASH_ERASE_TOUT	(3 * 1000)
+#define CONFIG_SYS_FLASH_ERASE_TOUT	(3 * 1000)
 /* Timeout for Flash write operations (in ms) */
-#define CFG_FLASH_WRITE_TOUT	(3 * 1000)
+#define CONFIG_SYS_FLASH_WRITE_TOUT	(3 * 1000)
 /* Timeout for Flash set sector lock bit operations (in ms) */
-#define CFG_FLASH_LOCK_TOUT		(3 * 1000)
+#define CONFIG_SYS_FLASH_LOCK_TOUT		(3 * 1000)
 /* Timeout for Flash clear lock bit operations (in ms) */
-#define CFG_FLASH_UNLOCK_TOUT	(3 * 1000)
+#define CONFIG_SYS_FLASH_UNLOCK_TOUT	(3 * 1000)
 /* Use hardware flash sectors protection instead of U-Boot software protection */
-#undef  CFG_FLASH_PROTECTION
-#undef  CFG_DIRECT_FLASH_TFTP
-#define CFG_ENV_IS_IN_FLASH
-#define CFG_ENV_SECT_SIZE	(128 * 1024)
-#define CFG_ENV_SIZE		(CFG_ENV_SECT_SIZE)
-#define CFG_ENV_ADDR		(CFG_FLASH_BASE + (1 * CFG_ENV_SECT_SIZE))
-/* Offset of env Flash sector relative to CFG_FLASH_BASE */
-#define CFG_ENV_OFFSET		(CFG_ENV_ADDR - CFG_FLASH_BASE)
-#define CFG_ENV_SIZE_REDUND	(CFG_ENV_SECT_SIZE)
-#define CFG_ENV_ADDR_REDUND	(CFG_FLASH_BASE + (2 * CFG_ENV_SECT_SIZE))
+#undef  CONFIG_SYS_FLASH_PROTECTION
+#undef  CONFIG_SYS_DIRECT_FLASH_TFTP
+#define CONFIG_ENV_IS_IN_FLASH
+#define CONFIG_ENV_SECT_SIZE	(128 * 1024)
+#define CONFIG_ENV_SIZE		(CONFIG_ENV_SECT_SIZE)
+#define CONFIG_ENV_ADDR		(CONFIG_SYS_FLASH_BASE + (1 * CONFIG_ENV_SECT_SIZE))
+/* Offset of env Flash sector relative to CONFIG_SYS_FLASH_BASE */
+#define CONFIG_ENV_OFFSET		(CONFIG_ENV_ADDR - CONFIG_SYS_FLASH_BASE)
+#define CONFIG_ENV_SIZE_REDUND	(CONFIG_ENV_SECT_SIZE)
+#define CONFIG_ENV_ADDR_REDUND	(CONFIG_SYS_FLASH_BASE + (2 * CONFIG_ENV_SECT_SIZE))
 
 /* Clock */
 #define CONFIG_SYS_CLK_FREQ	66666666
 #define TMU_CLK_DIVIDER		(4)	/* 4 (default), 16, 64, 256 or 1024 */
-#define CFG_HZ				(CONFIG_SYS_CLK_FREQ / TMU_CLK_DIVIDER)
+#define CONFIG_SYS_HZ				(CONFIG_SYS_CLK_FREQ / TMU_CLK_DIVIDER)
 
 /* Ether */
 #define CONFIG_SH_ETHER 1
diff --git a/include/configs/sh7785lcr.h b/include/configs/sh7785lcr.h
index efdb163dd..1b5905945 100644
--- a/include/configs/sh7785lcr.h
+++ b/include/configs/sh7785lcr.h
@@ -67,60 +67,60 @@
 #define SH7785LCR_FLASH_BANK_SIZE	(64 * 1024 * 1024)
 #define SH7785LCR_USB_BASE		(0xb4000000)
 
-#define CFG_LONGHELP
-#define CFG_PROMPT		"=> "
-#define CFG_CBSIZE		256
-#define CFG_PBSIZE		256
-#define CFG_MAXARGS		16
-#define CFG_BARGSIZE		512
-#define CFG_BAUDRATE_TABLE	{ 115200 }
+#define CONFIG_SYS_LONGHELP
+#define CONFIG_SYS_PROMPT		"=> "
+#define CONFIG_SYS_CBSIZE		256
+#define CONFIG_SYS_PBSIZE		256
+#define CONFIG_SYS_MAXARGS		16
+#define CONFIG_SYS_BARGSIZE		512
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 115200 }
 
 /* SCIF */
 #define CONFIG_SCIF_CONSOLE	1
 #define CONFIG_CONS_SCIF1	1
 #define CONFIG_SCIF_EXT_CLOCK	1
-#undef	CFG_CONSOLE_INFO_QUIET
-#undef	CFG_CONSOLE_OVERWRITE_ROUTINE
-#undef	CFG_CONSOLE_ENV_OVERWRITE
+#undef	CONFIG_SYS_CONSOLE_INFO_QUIET
+#undef	CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
+#undef	CONFIG_SYS_CONSOLE_ENV_OVERWRITE
 
 
-#define CFG_MEMTEST_START	(SH7785LCR_SDRAM_BASE)
-#define CFG_MEMTEST_END		(CFG_MEMTEST_START + \
+#define CONFIG_SYS_MEMTEST_START	(SH7785LCR_SDRAM_BASE)
+#define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_MEMTEST_START + \
 					(SH7785LCR_SDRAM_SIZE) - \
 					 4 * 1024 * 1024)
-#undef	CFG_ALT_MEMTEST
-#undef	CFG_MEMTEST_SCRATCH
-#undef	CFG_LOADS_BAUD_CHANGE
+#undef	CONFIG_SYS_ALT_MEMTEST
+#undef	CONFIG_SYS_MEMTEST_SCRATCH
+#undef	CONFIG_SYS_LOADS_BAUD_CHANGE
 
-#define CFG_SDRAM_BASE	(SH7785LCR_SDRAM_BASE)
-#define CFG_SDRAM_SIZE	(SH7785LCR_SDRAM_SIZE)
-#define CFG_LOAD_ADDR	(CFG_SDRAM_BASE + 16 * 1024 * 1024)
+#define CONFIG_SYS_SDRAM_BASE	(SH7785LCR_SDRAM_BASE)
+#define CONFIG_SYS_SDRAM_SIZE	(SH7785LCR_SDRAM_SIZE)
+#define CONFIG_SYS_LOAD_ADDR	(CONFIG_SYS_SDRAM_BASE + 16 * 1024 * 1024)
 
-#define CFG_MONITOR_BASE	(SH7785LCR_FLASH_BASE_1)
-#define CFG_MONITOR_LEN		(512 * 1024)
-#define CFG_MALLOC_LEN		(512 * 1024)
-#define CFG_GBL_DATA_SIZE	(256)
-#define CFG_BOOTMAPSZ		(8 * 1024 * 1024)
+#define CONFIG_SYS_MONITOR_BASE	(SH7785LCR_FLASH_BASE_1)
+#define CONFIG_SYS_MONITOR_LEN		(512 * 1024)
+#define CONFIG_SYS_MALLOC_LEN		(512 * 1024)
+#define CONFIG_SYS_GBL_DATA_SIZE	(256)
+#define CONFIG_SYS_BOOTMAPSZ		(8 * 1024 * 1024)
 
 /* FLASH */
 #define CONFIG_FLASH_CFI_DRIVER
-#define CFG_FLASH_CFI
-#undef	CFG_FLASH_QUIET_TEST
-#define CFG_FLASH_EMPTY_INFO
-#define CFG_FLASH_BASE		(SH7785LCR_FLASH_BASE_1)
-#define CFG_MAX_FLASH_SECT	512
-
-#define CFG_MAX_FLASH_BANKS	1
-#define CFG_FLASH_BANKS_LIST	{ CFG_FLASH_BASE + \
+#define CONFIG_SYS_FLASH_CFI
+#undef	CONFIG_SYS_FLASH_QUIET_TEST
+#define CONFIG_SYS_FLASH_EMPTY_INFO
+#define CONFIG_SYS_FLASH_BASE		(SH7785LCR_FLASH_BASE_1)
+#define CONFIG_SYS_MAX_FLASH_SECT	512
+
+#define CONFIG_SYS_MAX_FLASH_BANKS	1
+#define CONFIG_SYS_FLASH_BANKS_LIST	{ CONFIG_SYS_FLASH_BASE + \
 				 (0 * SH7785LCR_FLASH_BANK_SIZE) }
 
-#define CFG_FLASH_ERASE_TOUT	(3 * 1000)
-#define CFG_FLASH_WRITE_TOUT	(3 * 1000)
-#define CFG_FLASH_LOCK_TOUT	(3 * 1000)
-#define CFG_FLASH_UNLOCK_TOUT	(3 * 1000)
+#define CONFIG_SYS_FLASH_ERASE_TOUT	(3 * 1000)
+#define CONFIG_SYS_FLASH_WRITE_TOUT	(3 * 1000)
+#define CONFIG_SYS_FLASH_LOCK_TOUT	(3 * 1000)
+#define CONFIG_SYS_FLASH_UNLOCK_TOUT	(3 * 1000)
 
-#undef	CFG_FLASH_PROTECTION
-#undef	CFG_DIRECT_FLASH_TFTP
+#undef	CONFIG_SYS_FLASH_PROTECTION
+#undef	CONFIG_SYS_DIRECT_FLASH_TFTP
 
 /* R8A66597 */
 #define LITTLEENDIAN			/* for include/usb.h */
@@ -150,18 +150,18 @@
 #define CONFIG_RTL8169
 
 /* ENV setting */
-#define CFG_ENV_IS_IN_FLASH
+#define CONFIG_ENV_IS_IN_FLASH
 #define CONFIG_ENV_OVERWRITE	1
-#define CFG_ENV_SECT_SIZE	(256 * 1024)
-#define CFG_ENV_SIZE		(CFG_ENV_SECT_SIZE)
-#define CFG_ENV_ADDR		(CFG_FLASH_BASE + CFG_MONITOR_LEN)
-#define CFG_ENV_OFFSET		(CFG_ENV_ADDR - CFG_FLASH_BASE)
-#define CFG_ENV_SIZE_REDUND	(CFG_ENV_SECT_SIZE)
+#define CONFIG_ENV_SECT_SIZE	(256 * 1024)
+#define CONFIG_ENV_SIZE		(CONFIG_ENV_SECT_SIZE)
+#define CONFIG_ENV_ADDR		(CONFIG_SYS_FLASH_BASE + CONFIG_SYS_MONITOR_LEN)
+#define CONFIG_ENV_OFFSET		(CONFIG_ENV_ADDR - CONFIG_SYS_FLASH_BASE)
+#define CONFIG_ENV_SIZE_REDUND	(CONFIG_ENV_SECT_SIZE)
 
 /* Board Clock */
 /* The SCIF used external clock. system clock only used timer. */
 #define CONFIG_SYS_CLK_FREQ	50000000
 #define TMU_CLK_DIVIDER		4
-#define CFG_HZ			(CONFIG_SYS_CLK_FREQ / TMU_CLK_DIVIDER)
+#define CONFIG_SYS_HZ			(CONFIG_SYS_CLK_FREQ / TMU_CLK_DIVIDER)
 
 #endif	/* __SH7785LCR_H */
diff --git a/include/configs/shannon.h b/include/configs/shannon.h
index 8bbc730cb..75ba34cdb 100644
--- a/include/configs/shannon.h
+++ b/include/configs/shannon.h
@@ -48,8 +48,8 @@
 /*
  * Size of malloc() pool
  */
-#define CFG_MALLOC_LEN		(CFG_ENV_SIZE + 128*1024)
-#define CFG_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
+#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + 128*1024)
+#define CONFIG_SYS_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
 
 /*
  * Hardware drivers
@@ -95,25 +95,25 @@
 /*
  * Miscellaneous configurable options
  */
-#define	CFG_LONGHELP				/* undef to save memory		*/
-#define	CFG_PROMPT		"TuxScreen # "	/* Monitor Command Prompt	*/
-#define	CFG_CBSIZE		256		/* Console I/O Buffer Size	*/
-#define	CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define	CFG_MAXARGS		16		/* max number of command args	*/
-#define CFG_BARGSIZE		CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+#define	CONFIG_SYS_LONGHELP				/* undef to save memory		*/
+#define	CONFIG_SYS_PROMPT		"TuxScreen # "	/* Monitor Command Prompt	*/
+#define	CONFIG_SYS_CBSIZE		256		/* Console I/O Buffer Size	*/
+#define	CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define	CONFIG_SYS_MAXARGS		16		/* max number of command args	*/
+#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
 
-#define CFG_MEMTEST_START	0xc0400000	/* memtest works on	*/
-#define CFG_MEMTEST_END		0xc0800000	/* 4 ... 8 MB in DRAM	*/
+#define CONFIG_SYS_MEMTEST_START	0xc0400000	/* memtest works on	*/
+#define CONFIG_SYS_MEMTEST_END		0xc0800000	/* 4 ... 8 MB in DRAM	*/
 
-#undef  CFG_CLKS_IN_HZ		/* everything, incl board info, in Hz */
+#undef  CONFIG_SYS_CLKS_IN_HZ		/* everything, incl board info, in Hz */
 
-#define	CFG_LOAD_ADDR		0xd0000000	/* default load address	*/
+#define	CONFIG_SYS_LOAD_ADDR		0xd0000000	/* default load address	*/
 
-#define	CFG_HZ			3686400		/* incrementer freq: 3.6864 MHz */
-#define CFG_CPUSPEED		0x09		/* 190 MHz for Shannon */
+#define	CONFIG_SYS_HZ			3686400		/* incrementer freq: 3.6864 MHz */
+#define CONFIG_SYS_CPUSPEED		0x09		/* 190 MHz for Shannon */
 
 						/* valid baudrates */
-#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
 
 #define CONFIG_DOS_PARTITION	1		/* DOS partitiion support */
 
@@ -146,26 +146,26 @@
 #define PHYS_FLASH_1		0x00000000 /* Flash Bank #1 */
 #define PHYS_FLASH_SIZE		0x00400000 /* 4 MB */
 
-#define CFG_FLASH_BASE		PHYS_FLASH_1
+#define CONFIG_SYS_FLASH_BASE		PHYS_FLASH_1
 
 /*-----------------------------------------------------------------------
  * FLASH and environment organization
  */
-#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
-#define CFG_MAX_FLASH_SECT	(31+4)	/* max number of sectors on one chip	*/
+#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
+#define CONFIG_SYS_MAX_FLASH_SECT	(31+4)	/* max number of sectors on one chip	*/
 
 /* timeout values are in ticks */
-#define CFG_FLASH_ERASE_TOUT	(2*CFG_HZ) /* Timeout for Flash Erase */
-#define CFG_FLASH_WRITE_TOUT	(2*CFG_HZ) /* Timeout for Flash Write */
+#define CONFIG_SYS_FLASH_ERASE_TOUT	(2*CONFIG_SYS_HZ) /* Timeout for Flash Erase */
+#define CONFIG_SYS_FLASH_WRITE_TOUT	(2*CONFIG_SYS_HZ) /* Timeout for Flash Write */
 
-#define	CFG_ENV_IS_IN_FLASH	1
+#define	CONFIG_ENV_IS_IN_FLASH	1
 #ifdef CONFIG_INFERNO
 /* we take the last sector, 128 KB in size, but we only use 4 KB of it for stack reasons */
-#define CFG_ENV_ADDR		(PHYS_FLASH_1 + 0x003E0000)	/* Addr of Environment Sector	*/
-#define CFG_ENV_SIZE		0x4000	/* Total Size of Environment Sector	*/
+#define CONFIG_ENV_ADDR		(PHYS_FLASH_1 + 0x003E0000)	/* Addr of Environment Sector	*/
+#define CONFIG_ENV_SIZE		0x4000	/* Total Size of Environment Sector	*/
 #else
-#define CFG_ENV_ADDR		(PHYS_FLASH_1 + 0x1C000)	/* Addr of Environment Sector	*/
-#define CFG_ENV_SIZE		0x4000	/* Total Size of Environment Sector	*/
+#define CONFIG_ENV_ADDR		(PHYS_FLASH_1 + 0x1C000)	/* Addr of Environment Sector	*/
+#define CONFIG_ENV_SIZE		0x4000	/* Total Size of Environment Sector	*/
 #endif
 
 /*-----------------------------------------------------------------------
@@ -178,14 +178,14 @@
 
 #define CONFIG_PCMCIA_SLOT_A
 
-#define CFG_PCMCIA_IO_ADDR	(0x20000000)
-#define CFG_PCMCIA_IO_SIZE	( 64 << 20 )
-#define CFG_PCMCIA_DMA_ADDR	(0x24000000)
-#define CFG_PCMCIA_DMA_SIZE	( 64 << 20 )
-#define CFG_PCMCIA_ATTRB_ADDR	(0x2C000000)
-#define CFG_PCMCIA_ATTRB_SIZE	( 64 << 20 )
-#define CFG_PCMCIA_MEM_ADDR	(0x28000000)
-#define CFG_PCMCIA_MEM_SIZE	( 64 << 20 )
+#define CONFIG_SYS_PCMCIA_IO_ADDR	(0x20000000)
+#define CONFIG_SYS_PCMCIA_IO_SIZE	( 64 << 20 )
+#define CONFIG_SYS_PCMCIA_DMA_ADDR	(0x24000000)
+#define CONFIG_SYS_PCMCIA_DMA_SIZE	( 64 << 20 )
+#define CONFIG_SYS_PCMCIA_ATTRB_ADDR	(0x2C000000)
+#define CONFIG_SYS_PCMCIA_ATTRB_SIZE	( 64 << 20 )
+#define CONFIG_SYS_PCMCIA_MEM_ADDR	(0x28000000)
+#define CONFIG_SYS_PCMCIA_MEM_SIZE	( 64 << 20 )
 
 /* in fact, MEM and ATTRB are swapped - has to be corrected soon in cmd_pcmcia or so */
 
@@ -200,22 +200,22 @@
 #undef	CONFIG_IDE_LED			/* LED   for ide not supported	*/
 #undef	CONFIG_IDE_RESET		/* reset for ide not supported	*/
 
-#define CFG_IDE_MAXBUS		1	/* max. 1 IDE bus		*/
-#define CFG_IDE_MAXDEVICE	1	/* max. 1 drive per IDE bus	*/
+#define CONFIG_SYS_IDE_MAXBUS		1	/* max. 1 IDE bus		*/
+#define CONFIG_SYS_IDE_MAXDEVICE	1	/* max. 1 drive per IDE bus	*/
 
-#define CFG_ATA_IDE0_OFFSET	0x0000
+#define CONFIG_SYS_ATA_IDE0_OFFSET	0x0000
 
 /* it's simple, all regs are in I/O space */
-#define CFG_ATA_BASE_ADDR	CFG_PCMCIA_ATTRB_ADDR
+#define CONFIG_SYS_ATA_BASE_ADDR	CONFIG_SYS_PCMCIA_ATTRB_ADDR
 
 /* Offset for data I/O			*/
-#define CFG_ATA_DATA_OFFSET	0
+#define CONFIG_SYS_ATA_DATA_OFFSET	0
 
 /* Offset for normal register accesses	*/
-#define CFG_ATA_REG_OFFSET	0
+#define CONFIG_SYS_ATA_REG_OFFSET	0
 
 /* Offset for alternate registers	*/
-#define CFG_ATA_ALT_OFFSET	0
+#define CONFIG_SYS_ATA_ALT_OFFSET	0
 
 /*-----------------------------------------------------------------------
  */
diff --git a/include/configs/smdk2400.h b/include/configs/smdk2400.h
index ac1642e1f..6388be4d4 100644
--- a/include/configs/smdk2400.h
+++ b/include/configs/smdk2400.h
@@ -50,8 +50,8 @@
 /*
  * Size of malloc() pool
  */
-#define CFG_MALLOC_LEN		(CFG_ENV_SIZE + 128*1024)
-#define CFG_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
+#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + 128*1024)
+#define CONFIG_SYS_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
 
 /*
  * Hardware drivers
@@ -127,26 +127,26 @@
 /*
  * Miscellaneous configurable options
  */
-#define	CFG_LONGHELP				/* undef to save memory		*/
-#define	CFG_PROMPT		"SMDK2400 # "	/* Monitor Command Prompt	*/
-#define	CFG_CBSIZE		256		/* Console I/O Buffer Size	*/
-#define	CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define	CFG_MAXARGS		16		/* max number of command args	*/
-#define CFG_BARGSIZE		CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+#define	CONFIG_SYS_LONGHELP				/* undef to save memory		*/
+#define	CONFIG_SYS_PROMPT		"SMDK2400 # "	/* Monitor Command Prompt	*/
+#define	CONFIG_SYS_CBSIZE		256		/* Console I/O Buffer Size	*/
+#define	CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define	CONFIG_SYS_MAXARGS		16		/* max number of command args	*/
+#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
 
-#define CFG_MEMTEST_START	0x0c000000	/* memtest works on	*/
-#define CFG_MEMTEST_END		0x0e000000	/* 32 MB in DRAM	*/
+#define CONFIG_SYS_MEMTEST_START	0x0c000000	/* memtest works on	*/
+#define CONFIG_SYS_MEMTEST_END		0x0e000000	/* 32 MB in DRAM	*/
 
-#undef  CFG_CLKS_IN_HZ		/* everything, incl board info, in Hz */
+#undef  CONFIG_SYS_CLKS_IN_HZ		/* everything, incl board info, in Hz */
 
-#define	CFG_LOAD_ADDR		0x0cf00000	/* default load address	*/
+#define	CONFIG_SYS_LOAD_ADDR		0x0cf00000	/* default load address	*/
 
 /* the PWM TImer 4 uses a counter of 15625 for 10 ms, so we need */
 /* it to wrap 100 times (total 1562500) to get 1 sec. */
-#define	CFG_HZ			1562500
+#define	CONFIG_SYS_HZ			1562500
 
 /* valid baudrates */
-#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
 
 /*-----------------------------------------------------------------------
  * Stack sizes
@@ -166,26 +166,26 @@
 #define PHYS_SDRAM_1		0x0c000000 /* SDRAM Bank #1 */
 #define PHYS_SDRAM_1_SIZE	0x02000000 /* 32 MB */
 
-#define CFG_FLASH_BASE		0x00000000 /* Flash Bank #1 */
+#define CONFIG_SYS_FLASH_BASE		0x00000000 /* Flash Bank #1 */
 
 /*-----------------------------------------------------------------------
  * FLASH and environment organization
  */
-#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks */
-#define CFG_MAX_FLASH_SECT	(64)	/* max number of sectors on one chip */
+#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks */
+#define CONFIG_SYS_MAX_FLASH_SECT	(64)	/* max number of sectors on one chip */
 
 /* timeout values are in ticks */
-#define CFG_FLASH_ERASE_TOUT	(5*CFG_HZ) /* Timeout for Flash Erase */
-#define CFG_FLASH_WRITE_TOUT	(5*CFG_HZ) /* Timeout for Flash Write */
+#define CONFIG_SYS_FLASH_ERASE_TOUT	(5*CONFIG_SYS_HZ) /* Timeout for Flash Erase */
+#define CONFIG_SYS_FLASH_WRITE_TOUT	(5*CONFIG_SYS_HZ) /* Timeout for Flash Write */
 
-#define	CFG_ENV_IS_IN_FLASH	1
+#define	CONFIG_ENV_IS_IN_FLASH	1
 
 /* Address and size of Primary Environment Sector	*/
-#define CFG_ENV_ADDR		(CFG_FLASH_BASE + 0x40000)
-#define CFG_ENV_SIZE		0x40000
+#define CONFIG_ENV_ADDR		(CONFIG_SYS_FLASH_BASE + 0x40000)
+#define CONFIG_ENV_SIZE		0x40000
 
 /* Address and size of Redundant Environment Sector	*/
-#define CFG_ENV_ADDR_REDUND	(CFG_ENV_ADDR + CFG_ENV_SIZE)
-#define CFG_ENV_SIZE_REDUND	(CFG_ENV_SIZE)
+#define CONFIG_ENV_ADDR_REDUND	(CONFIG_ENV_ADDR + CONFIG_ENV_SIZE)
+#define CONFIG_ENV_SIZE_REDUND	(CONFIG_ENV_SIZE)
 
 #endif	/* __CONFIG_H */
diff --git a/include/configs/smdk2410.h b/include/configs/smdk2410.h
index efe4693ec..ecd958b55 100644
--- a/include/configs/smdk2410.h
+++ b/include/configs/smdk2410.h
@@ -47,8 +47,8 @@
 /*
  * Size of malloc() pool
  */
-#define CFG_MALLOC_LEN		(CFG_ENV_SIZE + 128*1024)
-#define CFG_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
+#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + 128*1024)
+#define CONFIG_SYS_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
 
 /*
  * Hardware drivers
@@ -110,26 +110,26 @@
 /*
  * Miscellaneous configurable options
  */
-#define	CFG_LONGHELP				/* undef to save memory		*/
-#define	CFG_PROMPT		"SMDK2410 # "	/* Monitor Command Prompt	*/
-#define	CFG_CBSIZE		256		/* Console I/O Buffer Size	*/
-#define	CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define	CFG_MAXARGS		16		/* max number of command args	*/
-#define CFG_BARGSIZE		CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+#define	CONFIG_SYS_LONGHELP				/* undef to save memory		*/
+#define	CONFIG_SYS_PROMPT		"SMDK2410 # "	/* Monitor Command Prompt	*/
+#define	CONFIG_SYS_CBSIZE		256		/* Console I/O Buffer Size	*/
+#define	CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define	CONFIG_SYS_MAXARGS		16		/* max number of command args	*/
+#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
 
-#define CFG_MEMTEST_START	0x30000000	/* memtest works on	*/
-#define CFG_MEMTEST_END		0x33F00000	/* 63 MB in DRAM	*/
+#define CONFIG_SYS_MEMTEST_START	0x30000000	/* memtest works on	*/
+#define CONFIG_SYS_MEMTEST_END		0x33F00000	/* 63 MB in DRAM	*/
 
-#undef  CFG_CLKS_IN_HZ		/* everything, incl board info, in Hz */
+#undef  CONFIG_SYS_CLKS_IN_HZ		/* everything, incl board info, in Hz */
 
-#define	CFG_LOAD_ADDR		0x33000000	/* default load address	*/
+#define	CONFIG_SYS_LOAD_ADDR		0x33000000	/* default load address	*/
 
 /* the PWM TImer 4 uses a counter of 15625 for 10 ms, so we need */
 /* it to wrap 100 times (total 1562500) to get 1 sec. */
-#define	CFG_HZ			1562500
+#define	CONFIG_SYS_HZ			1562500
 
 /* valid baudrates */
-#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
 
 /*-----------------------------------------------------------------------
  * Stack sizes
@@ -151,7 +151,7 @@
 
 #define PHYS_FLASH_1		0x00000000 /* Flash Bank #1 */
 
-#define CFG_FLASH_BASE		PHYS_FLASH_1
+#define CONFIG_SYS_FLASH_BASE		PHYS_FLASH_1
 
 /*-----------------------------------------------------------------------
  * FLASH and environment organization
@@ -162,23 +162,23 @@
 #define CONFIG_AMD_LV800	1	/* uncomment this if you have a LV800 flash */
 #endif
 
-#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks */
+#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks */
 #ifdef CONFIG_AMD_LV800
 #define PHYS_FLASH_SIZE		0x00100000 /* 1MB */
-#define CFG_MAX_FLASH_SECT	(19)	/* max number of sectors on one chip */
-#define CFG_ENV_ADDR		(CFG_FLASH_BASE + 0x0F0000) /* addr of environment */
+#define CONFIG_SYS_MAX_FLASH_SECT	(19)	/* max number of sectors on one chip */
+#define CONFIG_ENV_ADDR		(CONFIG_SYS_FLASH_BASE + 0x0F0000) /* addr of environment */
 #endif
 #ifdef CONFIG_AMD_LV400
 #define PHYS_FLASH_SIZE		0x00080000 /* 512KB */
-#define CFG_MAX_FLASH_SECT	(11)	/* max number of sectors on one chip */
-#define CFG_ENV_ADDR		(CFG_FLASH_BASE + 0x070000) /* addr of environment */
+#define CONFIG_SYS_MAX_FLASH_SECT	(11)	/* max number of sectors on one chip */
+#define CONFIG_ENV_ADDR		(CONFIG_SYS_FLASH_BASE + 0x070000) /* addr of environment */
 #endif
 
 /* timeout values are in ticks */
-#define CFG_FLASH_ERASE_TOUT	(5*CFG_HZ) /* Timeout for Flash Erase */
-#define CFG_FLASH_WRITE_TOUT	(5*CFG_HZ) /* Timeout for Flash Write */
+#define CONFIG_SYS_FLASH_ERASE_TOUT	(5*CONFIG_SYS_HZ) /* Timeout for Flash Erase */
+#define CONFIG_SYS_FLASH_WRITE_TOUT	(5*CONFIG_SYS_HZ) /* Timeout for Flash Write */
 
-#define	CFG_ENV_IS_IN_FLASH	1
-#define CFG_ENV_SIZE		0x10000	/* Total Size of Environment Sector */
+#define	CONFIG_ENV_IS_IN_FLASH	1
+#define CONFIG_ENV_SIZE		0x10000	/* Total Size of Environment Sector */
 
 #endif	/* __CONFIG_H */
diff --git a/include/configs/smdk6400.h b/include/configs/smdk6400.h
index f0c146e3e..1784cc622 100644
--- a/include/configs/smdk6400.h
+++ b/include/configs/smdk6400.h
@@ -40,7 +40,7 @@
 #define CONFIG_S3C64XX		1	/* in a SAMSUNG S3C64XX Family  */
 #define CONFIG_SMDK6400		1	/* on a SAMSUNG SMDK6400 Board  */
 
-#define CFG_SDRAM_BASE	0x50000000
+#define CONFIG_SYS_SDRAM_BASE	0x50000000
 
 /* input clock of PLL: SMDK6400 has 12MHz input clock */
 #define CONFIG_SYS_CLK_FREQ	12000000
@@ -68,8 +68,8 @@
 /*
  * Size of malloc() pool
  */
-#define CFG_MALLOC_LEN		(CFG_ENV_SIZE + 1024 * 1024)
-#define CFG_GBL_DATA_SIZE	128	/* size in bytes for initial data */
+#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + 1024 * 1024)
+#define CONFIG_SYS_GBL_DATA_SIZE	128	/* size in bytes for initial data */
 
 /*
  * Hardware drivers
@@ -83,9 +83,9 @@
  */
 #define CONFIG_SERIAL1          1	/* we use SERIAL 1 on SMDK6400	*/
 
-#define CFG_HUSH_PARSER			/* use "hush" command parser	*/
-#ifdef CFG_HUSH_PARSER
-#define CFG_PROMPT_HUSH_PS2	"> "
+#define CONFIG_SYS_HUSH_PARSER			/* use "hush" command parser	*/
+#ifdef CONFIG_SYS_HUSH_PARSER
+#define CONFIG_SYS_PROMPT_HUSH_PS2	"> "
 #endif
 
 #define CONFIG_CMDLINE_EDITING
@@ -126,22 +126,22 @@
 /*
  * Miscellaneous configurable options
  */
-#define CFG_LONGHELP				/* undef to save memory	      */
-#define CFG_PROMPT		"SMDK6400 # "	/* Monitor Command Prompt     */
-#define CFG_CBSIZE		256		/* Console I/O Buffer Size    */
-#define CFG_PBSIZE		384		/* Print Buffer Size          */
-#define CFG_MAXARGS		16		/* max number of command args */
-#define CFG_BARGSIZE		CFG_CBSIZE	/* Boot Argument Buffer Size  */
+#define CONFIG_SYS_LONGHELP				/* undef to save memory	      */
+#define CONFIG_SYS_PROMPT		"SMDK6400 # "	/* Monitor Command Prompt     */
+#define CONFIG_SYS_CBSIZE		256		/* Console I/O Buffer Size    */
+#define CONFIG_SYS_PBSIZE		384		/* Print Buffer Size          */
+#define CONFIG_SYS_MAXARGS		16		/* max number of command args */
+#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size  */
 
-#define CFG_MEMTEST_START	CFG_SDRAM_BASE	/* memtest works on	      */
-#define CFG_MEMTEST_END		(CFG_SDRAM_BASE + 0x7e00000) /* 126MB in DRAM */
+#define CONFIG_SYS_MEMTEST_START	CONFIG_SYS_SDRAM_BASE	/* memtest works on	      */
+#define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_SDRAM_BASE + 0x7e00000) /* 126MB in DRAM */
 
-#define CFG_LOAD_ADDR		CFG_SDRAM_BASE	/* default load address	*/
+#define CONFIG_SYS_LOAD_ADDR		CONFIG_SYS_SDRAM_BASE	/* default load address	*/
 
-#define CFG_HZ			1000
+#define CONFIG_SYS_HZ			1000
 
 /* valid baudrates */
-#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
 
 /*-----------------------------------------------------------------------
  * Stack sizes
@@ -171,32 +171,32 @@
 
 /* SMDK6400 has 2 banks of DRAM, but we use only one in U-Boot */
 #define CONFIG_NR_DRAM_BANKS	1
-#define PHYS_SDRAM_1		CFG_SDRAM_BASE	/* SDRAM Bank #1	*/
+#define PHYS_SDRAM_1		CONFIG_SYS_SDRAM_BASE	/* SDRAM Bank #1	*/
 #define PHYS_SDRAM_1_SIZE	0x08000000	/* 128 MB in Bank #1	*/
 
-#define CFG_FLASH_BASE		0x10000000
-#define CFG_MONITOR_BASE	0x00000000
+#define CONFIG_SYS_FLASH_BASE		0x10000000
+#define CONFIG_SYS_MONITOR_BASE	0x00000000
 
 /*-----------------------------------------------------------------------
  * FLASH and environment organization
  */
-#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks	*/
+#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks	*/
 /* AM29LV160B has 35 sectors, AM29LV800B - 19 */
-#define CFG_MAX_FLASH_SECT	40
+#define CONFIG_SYS_MAX_FLASH_SECT	40
 
 #define CONFIG_AMD_LV800
-#define CFG_FLASH_CFI		1	/* Use CFI parameters (needed?) */
+#define CONFIG_SYS_FLASH_CFI		1	/* Use CFI parameters (needed?) */
 /* Use drivers/cfi_flash.c, even though the flash is not CFI-compliant	*/
 #define CONFIG_FLASH_CFI_DRIVER	1
-#define CFG_FLASH_CFI_WIDTH	FLASH_CFI_16BIT
+#define CONFIG_SYS_FLASH_CFI_WIDTH	FLASH_CFI_16BIT
 #define CONFIG_FLASH_CFI_LEGACY
-#define CFG_FLASH_LEGACY_512Kx16
+#define CONFIG_SYS_FLASH_LEGACY_512Kx16
 
 /* timeout values are in ticks */
-#define CFG_FLASH_ERASE_TOUT	(5 * CFG_HZ) /* Timeout for Flash Erase	*/
-#define CFG_FLASH_WRITE_TOUT	(5 * CFG_HZ) /* Timeout for Flash Write	*/
+#define CONFIG_SYS_FLASH_ERASE_TOUT	(5 * CONFIG_SYS_HZ) /* Timeout for Flash Erase	*/
+#define CONFIG_SYS_FLASH_WRITE_TOUT	(5 * CONFIG_SYS_HZ) /* Timeout for Flash Write	*/
 
-#define CFG_ENV_SIZE		0x4000	/* Total Size of Environment Sector */
+#define CONFIG_ENV_SIZE		0x4000	/* Total Size of Environment Sector */
 
 /*
  * SMDK6400 board specific data
@@ -205,65 +205,65 @@
 #define CONFIG_IDENT_STRING	" for SMDK6400"
 
 /* base address for uboot */
-#define CFG_PHY_UBOOT_BASE	(CFG_SDRAM_BASE + 0x07e00000)
+#define CONFIG_SYS_PHY_UBOOT_BASE	(CONFIG_SYS_SDRAM_BASE + 0x07e00000)
 /* total memory available to uboot */
-#define CFG_UBOOT_SIZE		(1024 * 1024)
+#define CONFIG_SYS_UBOOT_SIZE		(1024 * 1024)
 
 #ifdef CONFIG_ENABLE_MMU
-#define CFG_MAPPED_RAM_BASE	0xc0000000
+#define CONFIG_SYS_MAPPED_RAM_BASE	0xc0000000
 #define CONFIG_BOOTCOMMAND	"nand read 0xc0018000 0x60000 0x1c0000;" \
 				"bootm 0xc0018000"
 #else
-#define CFG_MAPPED_RAM_BASE	CFG_SDRAM_BASE
+#define CONFIG_SYS_MAPPED_RAM_BASE	CONFIG_SYS_SDRAM_BASE
 #define CONFIG_BOOTCOMMAND	"nand read 0x50018000 0x60000 0x1c0000;" \
 				"bootm 0x50018000"
 #endif
 
 /* NAND U-Boot load and start address */
-#define CFG_UBOOT_BASE		(CFG_MAPPED_RAM_BASE + 0x07e00000)
+#define CONFIG_SYS_UBOOT_BASE		(CONFIG_SYS_MAPPED_RAM_BASE + 0x07e00000)
 
-#define CFG_ENV_OFFSET		0x0040000
+#define CONFIG_ENV_OFFSET		0x0040000
 
 /* NAND configuration */
-#define CFG_MAX_NAND_DEVICE	1
-#define CFG_NAND_BASE		0x70200010
+#define CONFIG_SYS_MAX_NAND_DEVICE	1
+#define CONFIG_SYS_NAND_BASE		0x70200010
 #define NAND_MAX_CHIPS		1
-#define CFG_S3C_NAND_HWECC
+#define CONFIG_SYS_S3C_NAND_HWECC
 
-#define CFG_NAND_SKIP_BAD_DOT_I	1  /* ".i" read skips bad blocks	      */
-#define CFG_NAND_WP		1
-#define CFG_NAND_YAFFS_WRITE	1  /* support yaffs write		      */
-#define CFG_NAND_BBT_2NDPAGE	1  /* bad-block markers in 1st and 2nd pages  */
+#define CONFIG_SYS_NAND_SKIP_BAD_DOT_I	1  /* ".i" read skips bad blocks	      */
+#define CONFIG_SYS_NAND_WP		1
+#define CONFIG_SYS_NAND_YAFFS_WRITE	1  /* support yaffs write		      */
+#define CONFIG_SYS_NAND_BBT_2NDPAGE	1  /* bad-block markers in 1st and 2nd pages  */
 
-#define CFG_NAND_U_BOOT_DST	CFG_PHY_UBOOT_BASE	/* NUB load-addr      */
-#define CFG_NAND_U_BOOT_START	CFG_NAND_U_BOOT_DST	/* NUB start-addr     */
+#define CONFIG_SYS_NAND_U_BOOT_DST	CONFIG_SYS_PHY_UBOOT_BASE	/* NUB load-addr      */
+#define CONFIG_SYS_NAND_U_BOOT_START	CONFIG_SYS_NAND_U_BOOT_DST	/* NUB start-addr     */
 
-#define CFG_NAND_U_BOOT_OFFS	(4 * 1024)	/* Offset to RAM U-Boot image */
-#define CFG_NAND_U_BOOT_SIZE	(252 * 1024)	/* Size of RAM U-Boot image   */
+#define CONFIG_SYS_NAND_U_BOOT_OFFS	(4 * 1024)	/* Offset to RAM U-Boot image */
+#define CONFIG_SYS_NAND_U_BOOT_SIZE	(252 * 1024)	/* Size of RAM U-Boot image   */
 
 /* NAND chip page size		*/
-#define CFG_NAND_PAGE_SIZE	2048
+#define CONFIG_SYS_NAND_PAGE_SIZE	2048
 /* NAND chip block size		*/
-#define CFG_NAND_BLOCK_SIZE	(128 * 1024)
+#define CONFIG_SYS_NAND_BLOCK_SIZE	(128 * 1024)
 /* NAND chip page per block count  */
-#define CFG_NAND_PAGE_COUNT	64
+#define CONFIG_SYS_NAND_PAGE_COUNT	64
 /* Location of the bad-block label */
-#define CFG_NAND_BAD_BLOCK_POS	0
+#define CONFIG_SYS_NAND_BAD_BLOCK_POS	0
 /* Extra address cycle for > 128MiB */
-#define CFG_NAND_5_ADDR_CYCLE
+#define CONFIG_SYS_NAND_5_ADDR_CYCLE
 
 /* Size of the block protected by one OOB (Spare Area in Samsung terminology) */
-#define CFG_NAND_ECCSIZE	CFG_NAND_PAGE_SIZE
+#define CONFIG_SYS_NAND_ECCSIZE	CONFIG_SYS_NAND_PAGE_SIZE
 /* Number of ECC bytes per OOB - S3C6400 calculates 4 bytes ECC in 1-bit mode */
-#define CFG_NAND_ECCBYTES	4
+#define CONFIG_SYS_NAND_ECCBYTES	4
 /* Number of ECC-blocks per NAND page */
-#define CFG_NAND_ECCSTEPS	(CFG_NAND_PAGE_SIZE / CFG_NAND_ECCSIZE)
+#define CONFIG_SYS_NAND_ECCSTEPS	(CONFIG_SYS_NAND_PAGE_SIZE / CONFIG_SYS_NAND_ECCSIZE)
 /* Size of a single OOB region */
-#define CFG_NAND_OOBSIZE	64
+#define CONFIG_SYS_NAND_OOBSIZE	64
 /* Number of ECC bytes per page */
-#define CFG_NAND_ECCTOTAL	(CFG_NAND_ECCBYTES * CFG_NAND_ECCSTEPS)
+#define CONFIG_SYS_NAND_ECCTOTAL	(CONFIG_SYS_NAND_ECCBYTES * CONFIG_SYS_NAND_ECCSTEPS)
 /* ECC byte positions */
-#define CFG_NAND_ECCPOS		{40, 41, 42, 43, 44, 45, 46, 47, \
+#define CONFIG_SYS_NAND_ECCPOS		{40, 41, 42, 43, 44, 45, 46, 47, \
 				 48, 49, 50, 51, 52, 53, 54, 55, \
 				 56, 57, 58, 59, 60, 61, 62, 63}
 
@@ -284,16 +284,16 @@
 */
 
 /* Settings as above boot configuration */
-#define CFG_ENV_IS_IN_NAND
+#define CONFIG_ENV_IS_IN_NAND
 #define CONFIG_BOOTARGS		"console=ttySAC,115200"
 
 #if !defined(CONFIG_ENABLE_MMU)
 #define CONFIG_CMD_USB			1
 #define CONFIG_USB_OHCI_NEW		1
-#define CFG_USB_OHCI_REGS_BASE		0x74300000
-#define CFG_USB_OHCI_SLOT_NAME		"s3c6400"
-#define CFG_USB_OHCI_MAX_ROOT_PORTS	3
-#define CFG_USB_OHCI_CPU_INIT		1
+#define CONFIG_SYS_USB_OHCI_REGS_BASE		0x74300000
+#define CONFIG_SYS_USB_OHCI_SLOT_NAME		"s3c6400"
+#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS	3
+#define CONFIG_SYS_USB_OHCI_CPU_INIT		1
 #define LITTLEENDIAN			1	/* used by usb_ohci.c	*/
 
 #define CONFIG_USB_STORAGE	1
diff --git a/include/configs/smmaco4.h b/include/configs/smmaco4.h
index 1d202d4b2..a3f267738 100644
--- a/include/configs/smmaco4.h
+++ b/include/configs/smmaco4.h
@@ -37,7 +37,7 @@
 #define CONFIG_TQM5200		1	/* ... on TQM5200 module */
 #undef CONFIG_TQM5200_REV100		/*  define for revision 100 modules */
 
-#define CFG_MPC5XXX_CLKIN	33000000 /* ... running at 33.000000MHz */
+#define CONFIG_SYS_MPC5XXX_CLKIN	33000000 /* ... running at 33.000000MHz */
 
 #define BOOTFLAG_COLD		0x01	/* Normal Power-On: Boot from FLASH  */
 #define BOOTFLAG_WARM		0x02	/* Software reboot	     */
@@ -49,7 +49,7 @@
  */
 #define CONFIG_PSC_CONSOLE	1	/* console is on PSC1 */
 #define CONFIG_BAUDRATE		115200	/* ... at 115200 bps */
-#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
 
 /* Partitions */
 #define CONFIG_MAC_PARTITION
@@ -57,9 +57,9 @@
 #define CONFIG_ISO_PARTITION
 
 /* POST support */
-#define CONFIG_POST		(CFG_POST_MEMORY   | \
-				 CFG_POST_CPU	   | \
-				 CFG_POST_I2C)
+#define CONFIG_POST		(CONFIG_SYS_POST_MEMORY   | \
+				 CONFIG_SYS_POST_CPU	   | \
+				 CONFIG_SYS_POST_I2C)
 
 #ifdef CONFIG_POST
 /* preserve space for the post_word at end of on-chip SRAM */
@@ -101,7 +101,7 @@
 #define	CONFIG_TIMESTAMP		/* display image timestamps */
 
 #if (TEXT_BASE == 0xFC000000)		/* Boot low */
-#   define CFG_LOWBOOT		1
+#   define CONFIG_SYS_LOWBOOT		1
 #endif
 
 /*
@@ -143,17 +143,17 @@
 /*
  * IPB Bus clocking configuration.
  */
-#define CFG_IPBCLK_EQUALS_XLBCLK		/* define for 133MHz speed */
+#define CONFIG_SYS_IPBCLK_EQUALS_XLBCLK		/* define for 133MHz speed */
 
-#if defined(CFG_IPBCLK_EQUALS_XLBCLK)
+#if defined(CONFIG_SYS_IPBCLK_EQUALS_XLBCLK)
 /*
  * PCI Bus clocking configuration
  *
  * Actually a PCI Clock of 66 MHz is only set (in cpu_init.c) if
- * CFG_IPBCLK_EQUALS_XLBCLK is defined. This is because a PCI Clock
+ * CONFIG_SYS_IPBCLK_EQUALS_XLBCLK is defined. This is because a PCI Clock
  * of 66 MHz yet hasn't been tested with a IPB Bus Clock of 66 MHz.
  */
-#define CFG_PCICLK_EQUALS_IPBCLK_DIV2	/* define for 66MHz speed */
+#define CONFIG_SYS_PCICLK_EQUALS_IPBCLK_DIV2	/* define for 66MHz speed */
 #endif
 
 /*
@@ -161,9 +161,9 @@
  */
 #define CONFIG_HARD_I2C		1	/* I2C with hardware support */
 #ifdef CONFIG_TQM5200_REV100
-#define CFG_I2C_MODULE		1	/* Select I2C module #1 for rev. 100 board */
+#define CONFIG_SYS_I2C_MODULE		1	/* Select I2C module #1 for rev. 100 board */
 #else
-#define CFG_I2C_MODULE		2	/* Select I2C module #2 for all other revs */
+#define CONFIG_SYS_I2C_MODULE		2	/* Select I2C module #2 for all other revs */
 #endif
 
 /*
@@ -172,11 +172,11 @@
  * Please notice, that the resulting clock frequency could differ from the
  * configured value. This is because the I2C clock is derived from system
  * clock over a frequency divider with only a few divider values. U-boot
- * calculates the best approximation for CFG_I2C_SPEED. However the calculated
+ * calculates the best approximation for CONFIG_SYS_I2C_SPEED. However the calculated
  * approximation allways lies below the configured value, never above.
  */
-#define CFG_I2C_SPEED		100000 /* 100 kHz */
-#define CFG_I2C_SLAVE		0x7F
+#define CONFIG_SYS_I2C_SPEED		100000 /* 100 kHz */
+#define CONFIG_SYS_I2C_SLAVE		0x7F
 
 /*
  * EEPROM configuration for onboard EEPROM M24C32 (M24C64 should work
@@ -184,34 +184,34 @@
  * EEPROM (24C64) is on the same I2C address (but on other I2C bus), so the
  * same configuration could be used.
  */
-#define CFG_I2C_EEPROM_ADDR		0x50	/* 1010000x */
-#define CFG_I2C_EEPROM_ADDR_LEN		2
-#define CFG_EEPROM_PAGE_WRITE_BITS	5	/* =32 Bytes per write */
-#define CFG_EEPROM_PAGE_WRITE_DELAY_MS	20
+#define CONFIG_SYS_I2C_EEPROM_ADDR		0x50	/* 1010000x */
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN		2
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS	5	/* =32 Bytes per write */
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	20
 
 /*
  * Flash configuration
  */
-#define CFG_FLASH_BASE		TEXT_BASE /* 0xFC000000 */
+#define CONFIG_SYS_FLASH_BASE		TEXT_BASE /* 0xFC000000 */
 
 /* use CFI flash driver if no module variant is spezified */
-#define CFG_FLASH_CFI		1	/* Flash is CFI conformant */
+#define CONFIG_SYS_FLASH_CFI		1	/* Flash is CFI conformant */
 #define CONFIG_FLASH_CFI_DRIVER	1	/* Use the common driver */
-#define CFG_FLASH_BANKS_LIST	{ CFG_BOOTCS_START }
-#define CFG_FLASH_EMPTY_INFO
-#define CFG_FLASH_SIZE		0x04000000 /* 64 MByte */
-#define CFG_MAX_FLASH_SECT	512	/* max num of sects on one chip */
-#undef CFG_FLASH_USE_BUFFER_WRITE	/* not supported yet for AMD */
-
-#if !defined(CFG_LOWBOOT)
-#define CFG_ENV_ADDR		(CFG_FLASH_BASE + 0x00760000 + 0x00800000)
-#else	/* CFG_LOWBOOT */
-#define CFG_ENV_ADDR		(CFG_FLASH_BASE + 0x00060000)
-#endif	/* CFG_LOWBOOT */
-#define CFG_MAX_FLASH_BANKS	1	/* max num of flash banks
+#define CONFIG_SYS_FLASH_BANKS_LIST	{ CONFIG_SYS_BOOTCS_START }
+#define CONFIG_SYS_FLASH_EMPTY_INFO
+#define CONFIG_SYS_FLASH_SIZE		0x04000000 /* 64 MByte */
+#define CONFIG_SYS_MAX_FLASH_SECT	512	/* max num of sects on one chip */
+#undef CONFIG_SYS_FLASH_USE_BUFFER_WRITE	/* not supported yet for AMD */
+
+#if !defined(CONFIG_SYS_LOWBOOT)
+#define CONFIG_ENV_ADDR		(CONFIG_SYS_FLASH_BASE + 0x00760000 + 0x00800000)
+#else	/* CONFIG_SYS_LOWBOOT */
+#define CONFIG_ENV_ADDR		(CONFIG_SYS_FLASH_BASE + 0x00060000)
+#endif	/* CONFIG_SYS_LOWBOOT */
+#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max num of flash banks
 					   (= chip selects) */
-#define CFG_FLASH_ERASE_TOUT	240000	/* Flash Erase Timeout (in ms)	*/
-#define CFG_FLASH_WRITE_TOUT	500	/* Flash Write Timeout (in ms)	*/
+#define CONFIG_SYS_FLASH_ERASE_TOUT	240000	/* Flash Erase Timeout (in ms)	*/
+#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Flash Write Timeout (in ms)	*/
 
 /* Dynamic MTD partition support */
 #define CONFIG_JFFS2_CMDLINE
@@ -226,41 +226,41 @@
 /*
  * Environment settings
  */
-#define CFG_ENV_IS_IN_FLASH	1
-#define CFG_ENV_SIZE		0x10000
-#define CFG_ENV_SECT_SIZE	0x20000
-#define CFG_ENV_ADDR_REDUND	(CFG_ENV_ADDR + CFG_ENV_SECT_SIZE)
-#define	CFG_ENV_SIZE_REDUND	(CFG_ENV_SIZE)
+#define CONFIG_ENV_IS_IN_FLASH	1
+#define CONFIG_ENV_SIZE		0x10000
+#define CONFIG_ENV_SECT_SIZE	0x20000
+#define CONFIG_ENV_ADDR_REDUND	(CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE)
+#define	CONFIG_ENV_SIZE_REDUND	(CONFIG_ENV_SIZE)
 
 /*
  * Memory map
  */
-#define CFG_MBAR		0xF0000000
-#define CFG_SDRAM_BASE		0x00000000
-#define CFG_DEFAULT_MBAR	0x80000000
+#define CONFIG_SYS_MBAR		0xF0000000
+#define CONFIG_SYS_SDRAM_BASE		0x00000000
+#define CONFIG_SYS_DEFAULT_MBAR	0x80000000
 
 /* Use ON-Chip SRAM until RAM will be available */
-#define CFG_INIT_RAM_ADDR	MPC5XXX_SRAM
+#define CONFIG_SYS_INIT_RAM_ADDR	MPC5XXX_SRAM
 #ifdef CONFIG_POST
 /* preserve space for the post_word at end of on-chip SRAM */
-#define CFG_INIT_RAM_END	MPC5XXX_SRAM_POST_SIZE
+#define CONFIG_SYS_INIT_RAM_END	MPC5XXX_SRAM_POST_SIZE
 #else
-#define CFG_INIT_RAM_END	MPC5XXX_SRAM_SIZE
+#define CONFIG_SYS_INIT_RAM_END	MPC5XXX_SRAM_SIZE
 #endif
 
 
-#define CFG_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
-#define CFG_MONITOR_BASE	TEXT_BASE
-#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
-#   define CFG_RAMBOOT		1
+#define CONFIG_SYS_MONITOR_BASE	TEXT_BASE
+#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
+#   define CONFIG_SYS_RAMBOOT		1
 #endif
 
-#define CFG_MONITOR_LEN		(384 << 10)	/* Reserve 384 kB for Monitor	*/
-#define CFG_MALLOC_LEN		(256 << 10)	/* Reserve 256 kB for malloc()	*/
-#define CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
+#define CONFIG_SYS_MONITOR_LEN		(384 << 10)	/* Reserve 384 kB for Monitor	*/
+#define CONFIG_SYS_MALLOC_LEN		(256 << 10)	/* Reserve 256 kB for malloc()	*/
+#define CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
 
 /*
  * Ethernet configuration
@@ -299,19 +299,19 @@
  *   tests.
  */
 #if defined (CONFIG_MINIFAP)
-# define CFG_GPS_PORT_CONFIG	0x91000004
+# define CONFIG_SYS_GPS_PORT_CONFIG	0x91000004
 #elif defined (CONFIG_STK52XX)
 # if defined (CONFIG_STK52XX_REV100)
-#  define CFG_GPS_PORT_CONFIG	0x81500014
+#  define CONFIG_SYS_GPS_PORT_CONFIG	0x81500014
 # else /* STK52xx REV200 and above */
 #  if defined (CONFIG_TQM5200_REV100)
 #   error TQM5200 REV100 not supported on STK52XX REV200 or above
 #  else/* TQM5200 REV200 and above */
-#   define CFG_GPS_PORT_CONFIG	0x91500004
+#   define CONFIG_SYS_GPS_PORT_CONFIG	0x91500004
 #  endif
 # endif
 #else  /* TMQ5200 Inbetriebnahme-Board */
-# define CFG_GPS_PORT_CONFIG	0x81000004
+# define CONFIG_SYS_GPS_PORT_CONFIG	0x81000004
 #endif
 
 /*
@@ -322,30 +322,30 @@
 /*
  * Miscellaneous configurable options
  */
-#define CFG_LONGHELP			/* undef to save memory	    */
-#define CFG_PROMPT		"=> "	/* Monitor Command Prompt   */
+#define CONFIG_SYS_LONGHELP			/* undef to save memory	    */
+#define CONFIG_SYS_PROMPT		"=> "	/* Monitor Command Prompt   */
 #if defined(CONFIG_CMD_KGDB)
-#define CFG_CBSIZE		1024	/* Console I/O Buffer Size  */
+#define CONFIG_SYS_CBSIZE		1024	/* Console I/O Buffer Size  */
 #else
-#define CFG_CBSIZE		256	/* Console I/O Buffer Size  */
+#define CONFIG_SYS_CBSIZE		256	/* Console I/O Buffer Size  */
 #endif
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define CFG_MAXARGS		16	/* max number of command args	*/
-#define CFG_BARGSIZE		CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS		16	/* max number of command args	*/
+#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
 
 /* Enable an alternate, more extensive memory test */
-#define CFG_ALT_MEMTEST
+#define CONFIG_SYS_ALT_MEMTEST
 
-#define CFG_MEMTEST_START	0x00100000	/* memtest works on */
-#define CFG_MEMTEST_END		0x00f00000	/* 1 ... 15 MB in DRAM	*/
+#define CONFIG_SYS_MEMTEST_START	0x00100000	/* memtest works on */
+#define CONFIG_SYS_MEMTEST_END		0x00f00000	/* 1 ... 15 MB in DRAM	*/
 
-#define CFG_LOAD_ADDR		0x100000	/* default load address */
+#define CONFIG_SYS_LOAD_ADDR		0x100000	/* default load address */
 
-#define CFG_HZ			1000	/* decrementer freq: 1 ms ticks */
+#define CONFIG_SYS_HZ			1000	/* decrementer freq: 1 ms ticks */
 
-#define CFG_CACHELINE_SIZE	32	/* For MPC5xxx CPUs */
+#define CONFIG_SYS_CACHELINE_SIZE	32	/* For MPC5xxx CPUs */
 #if defined(CONFIG_CMD_KGDB)
-#  define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value */
+#  define CONFIG_SYS_CACHELINE_SHIFT	5	/* log base 2 of the above value */
 #endif
 
 /*
@@ -357,26 +357,26 @@
  * Various low-level settings
  */
 #if defined(CONFIG_MPC5200)
-#define CFG_HID0_INIT		HID0_ICE | HID0_ICFI
-#define CFG_HID0_FINAL		HID0_ICE
+#define CONFIG_SYS_HID0_INIT		HID0_ICE | HID0_ICFI
+#define CONFIG_SYS_HID0_FINAL		HID0_ICE
 #else
-#define CFG_HID0_INIT		0
-#define CFG_HID0_FINAL		0
+#define CONFIG_SYS_HID0_INIT		0
+#define CONFIG_SYS_HID0_FINAL		0
 #endif
 
-#define CFG_BOOTCS_START	CFG_FLASH_BASE
-#define CFG_BOOTCS_SIZE		CFG_FLASH_SIZE
-#ifdef CFG_PCICLK_EQUALS_IPBCLK_DIV2
-#define CFG_BOOTCS_CFG		0x0008DF30 /* for pci_clk  = 66 MHz */
+#define CONFIG_SYS_BOOTCS_START	CONFIG_SYS_FLASH_BASE
+#define CONFIG_SYS_BOOTCS_SIZE		CONFIG_SYS_FLASH_SIZE
+#ifdef CONFIG_SYS_PCICLK_EQUALS_IPBCLK_DIV2
+#define CONFIG_SYS_BOOTCS_CFG		0x0008DF30 /* for pci_clk  = 66 MHz */
 #else
-#define CFG_BOOTCS_CFG		0x0004DF30 /* for pci_clk = 33 MHz */
+#define CONFIG_SYS_BOOTCS_CFG		0x0004DF30 /* for pci_clk = 33 MHz */
 #endif
-#define CFG_CS0_START		CFG_FLASH_BASE
-#define CFG_CS0_SIZE		CFG_FLASH_SIZE
+#define CONFIG_SYS_CS0_START		CONFIG_SYS_FLASH_BASE
+#define CONFIG_SYS_CS0_SIZE		CONFIG_SYS_FLASH_SIZE
 
-#define CFG_CS_BURST		0x00000000
-#define CFG_CS_DEADCYCLE	0x33333311	/* 1 dead cycle for flash and SM501 */
+#define CONFIG_SYS_CS_BURST		0x00000000
+#define CONFIG_SYS_CS_DEADCYCLE	0x33333311	/* 1 dead cycle for flash and SM501 */
 
-#define CFG_RESET_ADDRESS	0xff000000
+#define CONFIG_SYS_RESET_ADDRESS	0xff000000
 
 #endif /* __CONFIG_H */
diff --git a/include/configs/socrates.h b/include/configs/socrates.h
index 15abec199..cbf04e3f2 100644
--- a/include/configs/socrates.h
+++ b/include/configs/socrates.h
@@ -33,6 +33,11 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
+/* new uImage format support */
+#define CONFIG_FIT		1
+#define CONFIG_OF_LIBFDT	1
+#define CONFIG_FIT_VERBOSE	1 /* enable fit_format_{error,warning}() */
+
 /* High Level Configuration Options */
 #define CONFIG_BOOKE		1	/* BOOKE			*/
 #define CONFIG_E500		1	/* BOOKE e500 family		*/
@@ -45,6 +50,7 @@
 #define CONFIG_TSEC_ENET		/* tsec ethernet support	*/
 
 #define CONFIG_MISC_INIT_R	1	/* Call misc_init_r		*/
+#define CONFIG_BOARD_EARLY_INIT_R 1	/* Call board_early_init_r	*/
 
 #define CONFIG_FSL_LAW		1	/* Use common FSL init code */
 
@@ -76,22 +82,21 @@
  */
 #define CONFIG_L2_CACHE			/* toggle L2 cache		*/
 #define CONFIG_BTB			/* toggle branch predition	*/
-#define CONFIG_ADDR_STREAMING		/* toggle addr streaming	*/
 
-#define CFG_INIT_DBCR DBCR_IDM		/* Enable Debug Exceptions	*/
+#define CONFIG_SYS_INIT_DBCR DBCR_IDM		/* Enable Debug Exceptions	*/
 
-#undef	CFG_DRAM_TEST			/* memory test, takes time	*/
-#define CFG_MEMTEST_START	0x00000000
-#define CFG_MEMTEST_END		0x10000000
+#undef	CONFIG_SYS_DRAM_TEST			/* memory test, takes time	*/
+#define CONFIG_SYS_MEMTEST_START	0x00400000
+#define CONFIG_SYS_MEMTEST_END		0x00C00000
 
 /*
  * Base addresses -- Note these are effective addresses where the
  * actual resources get mapped (not physical addresses)
  */
-#define CFG_CCSRBAR_DEFAULT	0xFF700000	/* CCSRBAR Default	*/
-#define CFG_CCSRBAR		0xE0000000	/* relocated CCSRBAR	*/
-#define CFG_CCSRBAR_PHYS	CFG_CCSRBAR	/* physical addr of CCSRBAR */
-#define CFG_IMMR		CFG_CCSRBAR	/* PQII uses CFG_IMMR	*/
+#define CONFIG_SYS_CCSRBAR_DEFAULT	0xFF700000	/* CCSRBAR Default	*/
+#define CONFIG_SYS_CCSRBAR		0xE0000000	/* relocated CCSRBAR	*/
+#define CONFIG_SYS_CCSRBAR_PHYS	CONFIG_SYS_CCSRBAR	/* physical addr of CCSRBAR */
+#define CONFIG_SYS_IMMR		CONFIG_SYS_CCSRBAR	/* PQII uses CONFIG_SYS_IMMR	*/
 
 /* DDR Setup */
 #define CONFIG_FSL_DDR2
@@ -102,8 +107,8 @@
 #undef CONFIG_ECC_INIT_VIA_DDRCONTROLLER	/* DDR controller or DMA? */
 #define CONFIG_MEM_INIT_VALUE	0xDeadBeef
 
-#define CFG_DDR_SDRAM_BASE	0x00000000
-#define CFG_SDRAM_BASE		CFG_DDR_SDRAM_BASE
+#define CONFIG_SYS_DDR_SDRAM_BASE	0x00000000
+#define CONFIG_SYS_SDRAM_BASE		CONFIG_SYS_DDR_SDRAM_BASE
 #define CONFIG_VERY_BIG_RAM
 
 #define CONFIG_NUM_DDR_CONTROLLERS	1
@@ -111,90 +116,120 @@
 #define CONFIG_CHIP_SELECTS_PER_CTRL	2
 
 /* I2C addresses of SPD EEPROMs */
-#define SPD_EEPROM_ADDRESS	0x51	/* CTLR 0 DIMM 0 */
+#define SPD_EEPROM_ADDRESS	0x50	/* CTLR 0 DIMM 0 */
 
 #define CONFIG_DDR_DEFAULT_CL	30		/* CAS latency 3	*/
 
 /* Hardcoded values, to use instead of SPD */
-#define CFG_DDR_CS0_BNDS		0x0000000f
-#define CFG_DDR_CS0_CONFIG		0x80010102
-#define CFG_DDR_TIMING_0		0x00260802
-#define CFG_DDR_TIMING_1		0x3935D322
-#define CFG_DDR_TIMING_2		0x14904CC8
-#define CFG_DDR_MODE			0x00480432
-#define CFG_DDR_INTERVAL		0x030C0100
-#define CFG_DDR_CONFIG_2		0x04400000
-#define CFG_DDR_CONFIG			0xC3008000
-#define CFG_DDR_CLK_CONTROL		0x03800000
-#define CFG_SDRAM_SIZE			256 /* in Megs */
+#define CONFIG_SYS_DDR_CS0_BNDS		0x0000000f
+#define CONFIG_SYS_DDR_CS0_CONFIG		0x80010102
+#define CONFIG_SYS_DDR_TIMING_0		0x00260802
+#define CONFIG_SYS_DDR_TIMING_1		0x3935D322
+#define CONFIG_SYS_DDR_TIMING_2		0x14904CC8
+#define CONFIG_SYS_DDR_MODE			0x00480432
+#define CONFIG_SYS_DDR_INTERVAL		0x030C0100
+#define CONFIG_SYS_DDR_CONFIG_2		0x04400000
+#define CONFIG_SYS_DDR_CONFIG			0xC3008000
+#define CONFIG_SYS_DDR_CLK_CONTROL		0x03800000
+#define CONFIG_SYS_SDRAM_SIZE			256 /* in Megs */
 
 /*
  * Flash on the LocalBus
  */
-#define CFG_LBC_CACHE_BASE	0xf0000000	/* Localbus cacheable	 */
+#define CONFIG_SYS_LBC_CACHE_BASE	0xf0000000	/* Localbus cacheable	 */
 
-#define CFG_FLASH0		0xFE000000
-#define CFG_FLASH1		0xFC000000
-#define CFG_FLASH_BANKS_LIST	{ CFG_FLASH1, CFG_FLASH0 }
+#define CONFIG_SYS_FLASH0		0xFE000000
+#define CONFIG_SYS_FLASH1		0xFC000000
+#define CONFIG_SYS_FLASH_BANKS_LIST	{ CONFIG_SYS_FLASH1, CONFIG_SYS_FLASH0 }
 
-#define CFG_LBC_FLASH_BASE	CFG_FLASH1	/* Localbus flash start	*/
-#define CFG_FLASH_BASE		CFG_LBC_FLASH_BASE /* start of FLASH	*/
+#define CONFIG_SYS_LBC_FLASH_BASE	CONFIG_SYS_FLASH1	/* Localbus flash start	*/
+#define CONFIG_SYS_FLASH_BASE		CONFIG_SYS_LBC_FLASH_BASE /* start of FLASH	*/
 
-#define CFG_BR0_PRELIM		0xfe001001	/* port size 16bit	*/
-#define CFG_OR0_PRELIM		0xfe000ff7	/* 32MB Flash		*/
-#define CFG_BR1_PRELIM		0xfc001001	/* port size 16bit	*/
-#define CFG_OR1_PRELIM		0xfe000ff7	/* 32MB Flash		*/
+#define CONFIG_SYS_BR0_PRELIM		0xfe001001	/* port size 16bit	*/
+#define CONFIG_SYS_OR0_PRELIM		0xfe000030	/* 32MB Flash		*/
+#define CONFIG_SYS_BR1_PRELIM		0xfc001001	/* port size 16bit	*/
+#define CONFIG_SYS_OR1_PRELIM		0xfe000030	/* 32MB Flash		*/
 
-#define CFG_FLASH_CFI				/* flash is CFI compat.	*/
+#define CONFIG_SYS_FLASH_CFI				/* flash is CFI compat.	*/
 #define CONFIG_FLASH_CFI_DRIVER			/* Use common CFI driver*/
-#define CFG_FLASH_EMPTY_INFO		/* print 'E' for empty sector	*/
 
-#define CFG_MAX_FLASH_BANKS	2		/* number of banks	*/
-#define CFG_MAX_FLASH_SECT	256		/* sectors per device	*/
-#undef	CFG_FLASH_CHECKSUM
-#define CFG_FLASH_ERASE_TOUT	60000	/* Flash Erase Timeout (ms)	*/
-#define CFG_FLASH_WRITE_TOUT	500	/* Flash Write Timeout (ms)	*/
+#define CONFIG_SYS_MAX_FLASH_BANKS	2		/* number of banks	*/
+#define CONFIG_SYS_MAX_FLASH_SECT	256		/* sectors per device	*/
+#undef	CONFIG_SYS_FLASH_CHECKSUM
+#define CONFIG_SYS_FLASH_ERASE_TOUT	60000	/* Flash Erase Timeout (ms)	*/
+#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Flash Write Timeout (ms)	*/
+
+#define CONFIG_SYS_MONITOR_BASE	TEXT_BASE	/* start of monitor	*/
+
+#define CONFIG_SYS_LBC_LCRR		0x00030004    /* LB clock ratio reg	*/
+#define CONFIG_SYS_LBC_LBCR		0x00000000    /* LB config reg		*/
+#define CONFIG_SYS_LBC_LSRT		0x20000000    /* LB sdram refresh timer	*/
+#define CONFIG_SYS_LBC_MRTPR		0x20000000    /* LB refresh timer presc.*/
 
-#define CFG_MONITOR_BASE	TEXT_BASE	/* start of monitor	*/
+#define CONFIG_SYS_INIT_RAM_LOCK	1
+#define CONFIG_SYS_INIT_RAM_ADDR	0xe4010000	/* Initial RAM address	*/
+#define CONFIG_SYS_INIT_RAM_END	0x4000		/* End used area in RAM	*/
 
-#define CFG_LBC_LCRR		0x00030008    /* LB clock ratio reg	*/
-#define CFG_LBC_LBCR		0x00000000    /* LB config reg		*/
-#define CFG_LBC_LSRT		0x20000000    /* LB sdram refresh timer	*/
-#define CFG_LBC_MRTPR		0x20000000    /* LB refresh timer presc.*/
+#define CONFIG_SYS_GBL_DATA_SIZE	128		/* num bytes initial data*/
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
-#define CONFIG_L1_INIT_RAM
-#define CFG_INIT_RAM_LOCK	1
-#define CFG_INIT_RAM_ADDR	0xe4010000	/* Initial RAM address	*/
-#define CFG_INIT_RAM_END	0x4000		/* End used area in RAM	*/
+#define CONFIG_SYS_MONITOR_LEN		(256 * 1024)	/* Reserve 256kB for Mon */
+#define CONFIG_SYS_MALLOC_LEN		(4 << 20)	/* Reserve 4 MB for malloc */
 
-#define CFG_GBL_DATA_SIZE	128		/* num bytes initial data*/
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+/* FPGA and NAND */
+#define CONFIG_SYS_FPGA_BASE		0xc0000000
+#define CONFIG_SYS_FPGA_SIZE		0x00100000	/* 1 MB		*/
+#define CONFIG_SYS_HMI_BASE		0xc0010000
+#define CONFIG_SYS_BR3_PRELIM		0xc0001881	/* UPMA, 32-bit */
+#define CONFIG_SYS_OR3_PRELIM		0xfff00000	/* 1 MB 	*/
+
+#define CONFIG_SYS_NAND_BASE		(CONFIG_SYS_FPGA_BASE + 0x70)
+#define CONFIG_SYS_MAX_NAND_DEVICE	1
+#define NAND_MAX_CHIPS		1
+#define CONFIG_CMD_NAND
 
-#define CFG_MONITOR_LEN		(256 * 1024)	/* Reserve 256kB for Mon*/
-#define CFG_MALLOC_LEN		(256 * 1024)	/* Reserved for malloc	*/
+/* LIME GDC */
+#define CONFIG_SYS_LIME_BASE		0xc8000000
+#define CONFIG_SYS_LIME_SIZE		0x04000000	/* 64 MB	*/
+#define CONFIG_SYS_BR2_PRELIM		0xc80018a1	/* UPMB, 32-bit	*/
+#define CONFIG_SYS_OR2_PRELIM		0xfc000000	/* 64 MB	*/
+
+#define CONFIG_VIDEO
+#define CONFIG_VIDEO_MB862xx
+#define CONFIG_CFB_CONSOLE
+#define CONFIG_VIDEO_LOGO
+#define CONFIG_VIDEO_BMP_LOGO
+#define CONFIG_CONSOLE_EXTRA_INFO
+#define VIDEO_FB_16BPP_PIXEL_SWAP
+#define CONFIG_VGA_AS_SINGLE_DEVICE
+#define CONFIG_SYS_CONSOLE_IS_IN_ENV
+#define CONFIG_VIDEO_SW_CURSOR
+#define CONFIG_SPLASH_SCREEN
+#define CONFIG_VIDEO_BMP_GZIP
+#define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE	(2 << 20)	/* decompressed img */
 
 /* Serial Port */
 
 #define CONFIG_CONS_INDEX     1
 #undef	CONFIG_SERIAL_SOFTWARE_FIFO
-#define CFG_NS16550
-#define CFG_NS16550_SERIAL
-#define CFG_NS16550_REG_SIZE	1
-#define CFG_NS16550_CLK		get_bus_freq(0)
+#define CONFIG_SYS_NS16550
+#define CONFIG_SYS_NS16550_SERIAL
+#define CONFIG_SYS_NS16550_REG_SIZE	1
+#define CONFIG_SYS_NS16550_CLK		get_bus_freq(0)
 
-#define CFG_NS16550_COM1	(CFG_CCSRBAR+0x4500)
-#define CFG_NS16550_COM2	(CFG_CCSRBAR+0x4600)
+#define CONFIG_SYS_NS16550_COM1	(CONFIG_SYS_CCSRBAR+0x4500)
+#define CONFIG_SYS_NS16550_COM2	(CONFIG_SYS_CCSRBAR+0x4600)
 
 #define CONFIG_BAUDRATE         115200
 
-#define CFG_BAUDRATE_TABLE  \
+#define CONFIG_SYS_BAUDRATE_TABLE  \
 	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200}
 
 #define CONFIG_CMDLINE_EDITING	1	/* add command line history	*/
-#define CFG_HUSH_PARSER		1	/* Use the HUSH parser		*/
-#ifdef	CFG_HUSH_PARSER
-#define	CFG_PROMPT_HUSH_PS2	"> "
+#define CONFIG_SYS_HUSH_PARSER		1	/* Use the HUSH parser		*/
+#ifdef	CONFIG_SYS_HUSH_PARSER
+#define	CONFIG_SYS_PROMPT_HUSH_PS2	"> "
 #endif
 
 
@@ -204,39 +239,44 @@
 #define CONFIG_FSL_I2C		/* Use FSL common I2C driver */
 #define CONFIG_HARD_I2C			/* I2C with hardware support	*/
 #undef	CONFIG_SOFT_I2C			/* I2C bit-banged		*/
-#define CFG_I2C_SPEED		400000	/* I2C speed and slave address	*/
-#define CFG_I2C_SLAVE		0x7F
-#define CFG_I2C_NOPROBES	{0x48}	/* Don't probe these addrs	*/
-#define CFG_I2C_OFFSET		0x3000
+#define CONFIG_SYS_I2C_SPEED		102124	/* I2C speed and slave address	*/
+#define CONFIG_SYS_I2C_SLAVE		0x7F
+#define CONFIG_SYS_I2C_OFFSET		0x3000
+
+#define CONFIG_I2C_MULTI_BUS
+#define CONFIG_I2C_CMD_TREE
+#define CONFIG_SYS_I2C2_OFFSET		0x3100
 
 /* I2C RTC */
 #define CONFIG_RTC_RX8025		/* Use Epson rx8025 rtc via i2c	*/
-#define CFG_I2C_RTC_ADDR	0x32	/* at address 0x32		*/
+#define CONFIG_SYS_I2C_RTC_ADDR	0x32	/* at address 0x32		*/
+
+/* I2C W83782G HW-Monitoring IC */
+#define CONFIG_SYS_I2C_W83782G_ADDR	0x28	/* W83782G address 		*/
 
 /* I2C temp sensor */
 /* Socrates uses Maxim's	DS75, which is compatible with LM75 */
 #define CONFIG_DTT_LM75		1
 #define CONFIG_DTT_SENSORS	{4}		/* Sensor addresses	*/
-#define CFG_DTT_MAX_TEMP	125
-#define CFG_DTT_LOW_TEMP	-55
-#define CFG_DTT_HYSTERESIS	3
-#define CFG_EEPROM_PAGE_WRITE_ENABLE	/* necessary for the LM75 chip */
-#define CFG_EEPROM_PAGE_WRITE_BITS	4
+#define CONFIG_SYS_DTT_MAX_TEMP	125
+#define CONFIG_SYS_DTT_LOW_TEMP	-55
+#define CONFIG_SYS_DTT_HYSTERESIS	3
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS	4
 
 /*
  * General PCI
  * Memory space is mapped 1-1.
  */
-#define CFG_PCI_PHYS		0x80000000	/* 1G PCI TLB */
+#define CONFIG_SYS_PCI_PHYS		0x80000000	/* 1G PCI TLB */
 
 /* PCI is clocked by the external source at 33 MHz */
 #define CONFIG_PCI_CLK_FREQ	33000000
-#define CFG_PCI1_MEM_BASE	0x80000000
-#define CFG_PCI1_MEM_PHYS	CFG_PCI1_MEM_BASE
-#define CFG_PCI1_MEM_SIZE	0x20000000	/* 512M			*/
-#define CFG_PCI1_IO_BASE	0xE2000000
-#define CFG_PCI1_IO_PHYS	CFG_PCI1_IO_BASE
-#define CFG_PCI1_IO_SIZE	0x01000000	/* 16M			*/
+#define CONFIG_SYS_PCI1_MEM_BASE	0x80000000
+#define CONFIG_SYS_PCI1_MEM_PHYS	CONFIG_SYS_PCI1_MEM_BASE
+#define CONFIG_SYS_PCI1_MEM_SIZE	0x20000000	/* 512M			*/
+#define CONFIG_SYS_PCI1_IO_BASE	0xE2000000
+#define CONFIG_SYS_PCI1_IO_PHYS	CONFIG_SYS_PCI1_IO_BASE
+#define CONFIG_SYS_PCI1_IO_SIZE	0x01000000	/* 16M			*/
 
 #if defined(CONFIG_PCI)
 #define CONFIG_PCI_PNP			/* do pci plug-and-play		*/
@@ -270,15 +310,15 @@
 /*
  * Environment
  */
-#define CFG_ENV_IS_IN_FLASH	1
-#define CFG_ENV_SECT_SIZE	0x20000 /* 128K(one sector) for env	*/
-#define CFG_ENV_ADDR		(CFG_MONITOR_BASE - CFG_ENV_SECT_SIZE)
-#define CFG_ENV_SIZE		0x4000
-#define CFG_ENV_ADDR_REDUND	(CFG_ENV_ADDR-CFG_ENV_SECT_SIZE)
-#define CFG_ENV_SIZE_REDUND	(CFG_ENV_SIZE)
+#define CONFIG_ENV_IS_IN_FLASH	1
+#define CONFIG_ENV_SECT_SIZE	0x20000 /* 128K(one sector) for env	*/
+#define CONFIG_ENV_ADDR		(CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
+#define CONFIG_ENV_SIZE		0x4000
+#define CONFIG_ENV_ADDR_REDUND	(CONFIG_ENV_ADDR-CONFIG_ENV_SECT_SIZE)
+#define CONFIG_ENV_SIZE_REDUND	(CONFIG_ENV_SIZE)
 
 #define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
-#define CFG_LOADS_BAUD_CHANGE	1	/* allow baudrate change	*/
+#define CONFIG_SYS_LOADS_BAUD_CHANGE	1	/* allow baudrate change	*/
 
 #define	CONFIG_TIMESTAMP		/* Print image info with ts	*/
 
@@ -302,44 +342,45 @@
 #define CONFIG_CMD_DTT
 #undef CONFIG_CMD_EEPROM
 #define CONFIG_CMD_I2C
+#define CONFIG_CMD_SDRAM
 #define CONFIG_CMD_MII
 #define CONFIG_CMD_NFS
 #define CONFIG_CMD_PING
 #define CONFIG_CMD_SNTP
 #define CONFIG_CMD_USB
-
+#define CONFIG_CMD_EXT2		/* EXT2 Support			*/
+#define CONFIG_CMD_BMP
 
 #if defined(CONFIG_PCI)
     #define CONFIG_CMD_PCI
 #endif
 
-
 #undef CONFIG_WATCHDOG			/* watchdog disabled		*/
 
 /*
  * Miscellaneous configurable options
  */
-#define CFG_LONGHELP			/* undef to save memory		*/
-#define CFG_LOAD_ADDR	0x2000000	/* default load address		*/
-#define CFG_PROMPT	"=> "		/* Monitor Command Prompt	*/
+#define CONFIG_SYS_LONGHELP			/* undef to save memory		*/
+#define CONFIG_SYS_LOAD_ADDR	0x2000000	/* default load address		*/
+#define CONFIG_SYS_PROMPT	"=> "		/* Monitor Command Prompt	*/
 
 #if defined(CONFIG_CMD_KGDB)
-    #define CFG_CBSIZE	1024		/* Console I/O Buffer Size	*/
+    #define CONFIG_SYS_CBSIZE	1024		/* Console I/O Buffer Size	*/
 #else
-    #define CFG_CBSIZE	256		/* Console I/O Buffer Size	*/
+    #define CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size	*/
 #endif
 
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buf Size	*/
-#define CFG_MAXARGS	16		/* max number of command args	*/
-#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size	*/
-#define CFG_HZ		1000		/* decrementer freq: 1ms ticks	*/
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buf Size	*/
+#define CONFIG_SYS_MAXARGS	16		/* max number of command args	*/
+#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
+#define CONFIG_SYS_HZ		1000		/* decrementer freq: 1ms ticks	*/
 
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define CFG_BOOTMAPSZ	(8 << 20)	/* Initial Memory map for Linux	*/
+#define CONFIG_SYS_BOOTMAPSZ	(8 << 20)	/* Initial Memory map for Linux	*/
 
 /*
  * Internal Definitions
@@ -357,50 +398,69 @@
 
 #define CONFIG_LOADADDR	 200000		/* default addr for tftp & bootm*/
 
-#define CONFIG_BOOTDELAY 5		/* -1 disables auto-boot	*/
+#define CONFIG_BOOTDELAY 1		/* -1 disables auto-boot	*/
 
 #define CONFIG_PREBOOT	"echo;"	\
-	"echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;" \
+	"echo Welcome on the ABB Socrates Board;" \
 	"echo"
 
 #undef	CONFIG_BOOTARGS		/* the boot command will set bootargs	*/
 
 #define	CONFIG_EXTRA_ENV_SETTINGS					\
-	"bootfile=$hostname/uImage\0"					\
 	"netdev=eth0\0"							\
 	"consdev=ttyS0\0"						\
-	"hostname=socrates\0"						\
+	"uboot_file=/home/tftp/syscon3/u-boot.bin\0"			\
+	"bootfile=/home/tftp/syscon3/uImage\0"				\
+	"fdt_file=/home/tftp/syscon3/socrates.dtb\0"			\
+	"initrd_file=/home/tftp/syscon3/uinitrd.gz\0"			\
+	"uboot_addr=FFFA0000\0"						\
+	"kernel_addr=FE000000\0"					\
+	"fdt_addr=FE1E0000\0"						\
+	"ramdisk_addr=FE200000\0"					\
+	"fdt_addr_r=B00000\0"						\
+	"kernel_addr_r=200000\0"					\
+	"ramdisk_addr_r=400000\0"					\
+	"rootpath=/opt/eldk/ppc_85xxDP\0"				\
+	"ramargs=setenv bootargs root=/dev/ram rw\0"			\
 	"nfsargs=setenv bootargs root=/dev/nfs rw "			\
 		"nfsroot=$serverip:$rootpath\0"				\
-	"ramargs=setenv bootargs root=/dev/ram rw\0"			\
+	"addcons=setenv bootargs $bootargs "				\
+		"console=$consdev,$baudrate\0"				\
 	"addip=setenv bootargs $bootargs "				\
 		"ip=$ipaddr:$serverip:$gatewayip:$netmask"		\
 		":$hostname:$netdev:off panic=1\0"			\
-	"addcons=setenv bootargs $bootargs "				\
-		"console=$consdev,$baudrate\0"				\
-	"flash_self=run ramargs addip addcons;"				\
+	"boot_nor=run ramargs addcons;"					\
 		"bootm ${kernel_addr} ${ramdisk_addr} ${fdt_addr}\0"	\
-	"flash_nfs=run nfsargs addip addcons;"				\
-		"bootm ${kernel_addr} - ${fdt_addr}\0"			\
 	"net_nfs=tftp ${kernel_addr_r} ${bootfile}; "			\
 		"tftp ${fdt_addr_r} ${fdt_file}; "			\
 		"run nfsargs addip addcons;"				\
 		"bootm ${kernel_addr_r} - ${fdt_addr_r}\0"		\
-	"fdt_file=$hostname/socrates.dtb\0"				\
-	"fdt_addr_r=B00000\0"						\
-	"fdt_addr=FC1E0000\0"						\
-	"rootpath=/opt/eldk/ppc_85xxDP\0"				\
-	"kernel_addr=FC000000\0"					\
-	"kernel_addr_r=200000\0"					\
-	"ramdisk_addr=FC200000\0"					\
-	"ramdisk_addr_r=400000\0"					\
-	"load=tftp 100000 $hostname/u-boot.bin\0"		\
-	"update=protect off fffc0000 ffffffff;era fffc0000 ffffffff;"	\
-		"cp.b 100000 fffc0000 40000;"			        \
+	"update_uboot=tftp 100000 ${uboot_file};"			\
+		"protect off fffa0000 ffffffff;"			\
+		"era fffa0000 ffffffff;"				\
+		"cp.b 100000 fffa0000 ${filesize};"			\
 		"setenv filesize;saveenv\0"				\
-	"upd=run load update\0"						\
+	"update_kernel=tftp 100000 ${bootfile};"			\
+		"era fe000000 fe1dffff;"				\
+		"cp.b 100000 fe000000 ${filesize};"			\
+		"setenv filesize;saveenv\0"				\
+	"update_fdt=tftp 100000 ${fdt_file};" 				\
+		"era fe1e0000 fe1fffff;"				\
+		"cp.b 100000 fe1e0000 ${filesize};"			\
+		"setenv filesize;saveenv\0"				\
+	"update_initrd=tftp 100000 ${initrd_file};" 			\
+		"era fe200000 fe9fffff;"				\
+		"cp.b 100000 fe200000 ${filesize};"			\
+		"setenv filesize;saveenv\0"				\
+	"clean_data=era fea00000 fff5ffff\0"				\
+	"usbargs=setenv bootargs root=/dev/sda1 rw\0" 			\
+	"load_usb=usb start;" 						\
+		"ext2load usb 0:1 ${kernel_addr_r} /boot/uImage\0"	\
+	"boot_usb=run load_usb usbargs addcons;"			\
+		"bootm ${kernel_addr_r} - ${fdt_addr};"			\
+		"bootm ${kernel_addr} ${ramdisk_addr} ${fdt_addr}\0"	\
 	""
-#define CONFIG_BOOTCOMMAND	"run flash_self"
+#define CONFIG_BOOTCOMMAND	"run boot_nor"
 
 /* pass open firmware flat tree */
 #define CONFIG_OF_LIBFDT	1
@@ -410,20 +470,11 @@
 #define CONFIG_USB_OHCI_NEW		1
 #define CONFIG_PCI_OHCI			1
 #define CONFIG_PCI_OHCI_DEVNO		3 /* Number in PCI list */
-#define CFG_USB_OHCI_MAX_ROOT_PORTS	15
-#define CFG_USB_OHCI_SLOT_NAME		"ohci_pci"
-#define CFG_OHCI_SWAP_REG_ACCESS	1
+#define CONFIG_PCI_EHCI_DEVNO		(CONFIG_PCI_OHCI_DEVNO / 2)
+#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS	15
+#define CONFIG_SYS_USB_OHCI_SLOT_NAME		"ohci_pci"
+#define CONFIG_SYS_OHCI_SWAP_REG_ACCESS	1
 #define CONFIG_DOS_PARTITION		1
 #define CONFIG_USB_STORAGE		1
 
-/* FPGA and NAND */
-#define CFG_FPGA_BASE			0xc0000000
-#define CFG_BR3_PRELIM			0xc0001881 /* UPMA, 32-bit */
-#define CFG_OR3_PRELIM			0xfff00000  /* 1 MB */
-
-#define CFG_NAND_BASE			(CFG_FPGA_BASE + 0x70)
-#define CFG_MAX_NAND_DEVICE		1
-#define NAND_MAX_CHIPS			1
-#define CONFIG_CMD_NAND
-
 #endif	/* __CONFIG_H */
diff --git a/include/configs/sorcery.h b/include/configs/sorcery.h
index f4e460800..5db1379e0 100644
--- a/include/configs/sorcery.h
+++ b/include/configs/sorcery.h
@@ -35,8 +35,8 @@
 
 /* Input clock running at 60Mhz, read Hid1 for the CPU multiplier to
    determine the CPU speed. */
-#define CFG_MPC8220_CLKIN	60000000 /* ... running at 60MHz */
-#define CFG_MPC8220_SYSPLL_VCO_MULTIPLIER 8 /* VCO multiplier can't be read from any register */
+#define CONFIG_SYS_MPC8220_CLKIN	60000000 /* ... running at 60MHz */
+#define CONFIG_SYS_MPC8220_SYSPLL_VCO_MULTIPLIER 8 /* VCO multiplier can't be read from any register */
 
 #define BOOTFLAG_COLD		0x01	/* Normal Power-On: Boot from FLASH */
 #define BOOTFLAG_WARM		0x02	/* Software reboot	*/
@@ -47,7 +47,7 @@
 #define CONFIG_PSC_CONSOLE	1	/* console is on PSC */
 
 #define CONFIG_BAUDRATE		115200	    /* ... at 115200 bps */
-#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
 
 /* PCI */
 #define CONFIG_PCI              1
@@ -136,14 +136,14 @@
  * I2C configuration
  */
 #define CONFIG_HARD_I2C		1
-#define CFG_I2C_MODULE		1
-#define CFG_I2C_SPEED		100000 /* 100 kHz */
-#define CFG_I2C_SLAVE		0x7F
+#define CONFIG_SYS_I2C_MODULE		1
+#define CONFIG_SYS_I2C_SPEED		100000 /* 100 kHz */
+#define CONFIG_SYS_I2C_SLAVE		0x7F
 
 /* Use the HUSH parser */
-#define CFG_HUSH_PARSER
-#ifdef	CFG_HUSH_PARSER
-#define CFG_PROMPT_HUSH_PS2 "> "
+#define CONFIG_SYS_HUSH_PARSER
+#ifdef	CONFIG_SYS_HUSH_PARSER
+#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
 #endif
 
 /*
@@ -154,103 +154,103 @@
  */
 
 /* Flash */
-#define CFG_CS0_BASE		0xf800
-#define CFG_CS0_MASK		0x08000000 /* 128 MB (two chips) */
-#define CFG_CS0_CTRL		0x001019c0
+#define CONFIG_SYS_CS0_BASE		0xf800
+#define CONFIG_SYS_CS0_MASK		0x08000000 /* 128 MB (two chips) */
+#define CONFIG_SYS_CS0_CTRL		0x001019c0
 
 /* NVM */
-#define CFG_CS1_BASE		0xf7e8
-#define CFG_CS1_MASK		0x00040000 /* 256K */
-#define CFG_CS1_CTRL		0x00101940 /* 8bit port size */
+#define CONFIG_SYS_CS1_BASE		0xf7e8
+#define CONFIG_SYS_CS1_MASK		0x00040000 /* 256K */
+#define CONFIG_SYS_CS1_CTRL		0x00101940 /* 8bit port size */
 
 /* Atlas2 + Gemini */
-#define CFG_CS2_BASE		0xf7e7
-#define CFG_CS2_MASK		0x00010000 /* 64K*/
-#define CFG_CS2_CTRL		0x001011c0 /* 16bit port size */
+#define CONFIG_SYS_CS2_BASE		0xf7e7
+#define CONFIG_SYS_CS2_MASK		0x00010000 /* 64K*/
+#define CONFIG_SYS_CS2_CTRL		0x001011c0 /* 16bit port size */
 
 /* CAN Controller */
-#define CFG_CS3_BASE		0xf7e6
-#define CFG_CS3_MASK		0x00010000 /* 64K */
-#define CFG_CS3_CTRL		0x00102140 /* 8Bit port size */
+#define CONFIG_SYS_CS3_BASE		0xf7e6
+#define CONFIG_SYS_CS3_MASK		0x00010000 /* 64K */
+#define CONFIG_SYS_CS3_CTRL		0x00102140 /* 8Bit port size */
 
 /* Foreign interface */
-#define CFG_CS4_BASE		0xf7e5
-#define CFG_CS4_MASK		0x00010000 /* 64K */
-#define CFG_CS4_CTRL		0x00101dc0 /* 16bit port size */
+#define CONFIG_SYS_CS4_BASE		0xf7e5
+#define CONFIG_SYS_CS4_MASK		0x00010000 /* 64K */
+#define CONFIG_SYS_CS4_CTRL		0x00101dc0 /* 16bit port size */
 
 /* CPLD */
-#define CFG_CS5_BASE		0xf7e4
-#define CFG_CS5_MASK		0x00010000 /* 64K */
-#define CFG_CS5_CTRL		0x001000c0 /* 16bit port size */
+#define CONFIG_SYS_CS5_BASE		0xf7e4
+#define CONFIG_SYS_CS5_MASK		0x00010000 /* 64K */
+#define CONFIG_SYS_CS5_CTRL		0x001000c0 /* 16bit port size */
 
-#define CFG_FLASH0_BASE		(CFG_CS0_BASE << 16)
-#define CFG_FLASH_BASE		(CFG_FLASH0_BASE)
+#define CONFIG_SYS_FLASH0_BASE		(CONFIG_SYS_CS0_BASE << 16)
+#define CONFIG_SYS_FLASH_BASE		(CONFIG_SYS_FLASH0_BASE)
 
-#define CFG_MAX_FLASH_BANKS	2	/* max num of flash banks */
-#define CFG_MAX_FLASH_SECT	512	/* max num of sects on one chip */
+#define CONFIG_SYS_MAX_FLASH_BANKS	2	/* max num of flash banks */
+#define CONFIG_SYS_MAX_FLASH_SECT	512	/* max num of sects on one chip */
 
 #define CONFIG_FLASH_CFI_DRIVER
-#define CFG_FLASH_CFI
-#define CFG_FLASH_BANKS_LIST	{ CFG_FLASH_BASE,  \
-				CFG_FLASH_BASE+0x04000000 } /* two banks */
+#define CONFIG_SYS_FLASH_CFI
+#define CONFIG_SYS_FLASH_BANKS_LIST	{ CONFIG_SYS_FLASH_BASE,  \
+				CONFIG_SYS_FLASH_BASE+0x04000000 } /* two banks */
 
 /*
  * Environment settings
  */
-#define CFG_ENV_IS_IN_FLASH	1
-#define CFG_ENV_ADDR		(CFG_FLASH_BASE + 0x8000000 - 0x40000)
-#define CFG_ENV_SIZE		0x4000                       /* 16K */
-#define CFG_ENV_SECT_SIZE	0x20000
-#define CFG_ENV_ADDR_REDUND	(CFG_ENV_ADDR + 0x20000)
-#define CFG_ENV_SIZE_REDUND	CFG_ENV_SIZE
+#define CONFIG_ENV_IS_IN_FLASH	1
+#define CONFIG_ENV_ADDR		(CONFIG_SYS_FLASH_BASE + 0x8000000 - 0x40000)
+#define CONFIG_ENV_SIZE		0x4000                       /* 16K */
+#define CONFIG_ENV_SECT_SIZE	0x20000
+#define CONFIG_ENV_ADDR_REDUND	(CONFIG_ENV_ADDR + 0x20000)
+#define CONFIG_ENV_SIZE_REDUND	CONFIG_ENV_SIZE
 
 #define CONFIG_ENV_OVERWRITE	1
 
-#if defined CFG_ENV_IS_IN_FLASH
-#undef CFG_ENV_IS_IN_NVRAM
-#undef CFG_ENV_IS_IN_EEPROM
-#elif defined CFG_ENV_IS_IN_NVRAM
-#undef CFG_ENV_IS_IN_FLASH
-#undef CFG_ENV_IS_IN_EEPROM
-#elif defined CFG_ENV_IS_IN_EEPROM
-#undef CFG_ENV_IS_IN_NVRAM
-#undef CFG_ENV_IS_IN_FLASH
+#if defined CONFIG_ENV_IS_IN_FLASH
+#undef CONFIG_ENV_IS_IN_NVRAM
+#undef CONFIG_ENV_IS_IN_EEPROM
+#elif defined CONFIG_ENV_IS_IN_NVRAM
+#undef CONFIG_ENV_IS_IN_FLASH
+#undef CONFIG_ENV_IS_IN_EEPROM
+#elif defined CONFIG_ENV_IS_IN_EEPROM
+#undef CONFIG_ENV_IS_IN_NVRAM
+#undef CONFIG_ENV_IS_IN_FLASH
 #endif
 
 /*
  * Memory map
  */
-#define CFG_MBAR		0xF0000000
-#define CFG_SDRAM_BASE		0x00000000
-#define CFG_DEFAULT_MBAR	0x80000000
-#define CFG_SRAM_BASE		(CFG_MBAR + 0x20000)
-#define CFG_SRAM_SIZE		0x8000
+#define CONFIG_SYS_MBAR		0xF0000000
+#define CONFIG_SYS_SDRAM_BASE		0x00000000
+#define CONFIG_SYS_DEFAULT_MBAR	0x80000000
+#define CONFIG_SYS_SRAM_BASE		(CONFIG_SYS_MBAR + 0x20000)
+#define CONFIG_SYS_SRAM_SIZE		0x8000
 
 /* Use SRAM until RAM will be available */
-#define CFG_INIT_RAM_ADDR	(CFG_MBAR + 0x20000)
-#define CFG_INIT_RAM_END	0x8000	/* End of used area in DPRAM */
+#define CONFIG_SYS_INIT_RAM_ADDR	(CONFIG_SYS_MBAR + 0x20000)
+#define CONFIG_SYS_INIT_RAM_END	0x8000	/* End of used area in DPRAM */
 
-#define CFG_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
-#define CFG_MONITOR_BASE	TEXT_BASE
-#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
-#   define CFG_RAMBOOT		1
+#define CONFIG_SYS_MONITOR_BASE	TEXT_BASE
+#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
+#   define CONFIG_SYS_RAMBOOT		1
 #endif
 
-#define CFG_MONITOR_LEN		(256 << 10) /* Reserve 256 kB for Monitor   */
-#define CFG_MALLOC_LEN		(128 << 10) /* Reserve 128 kB for malloc()  */
-#define CFG_BOOTMAPSZ		(8 << 20)   /* Initial Memory map for Linux */
+#define CONFIG_SYS_MONITOR_LEN		(256 << 10) /* Reserve 256 kB for Monitor   */
+#define CONFIG_SYS_MALLOC_LEN		(128 << 10) /* Reserve 128 kB for malloc()  */
+#define CONFIG_SYS_BOOTMAPSZ		(8 << 20)   /* Initial Memory map for Linux */
 
 /* SDRAM configuration (for SPD) */
-#define CFG_SDRAM_TOTAL_BANKS		1
-#define CFG_SDRAM_SPD_I2C_ADDR		0x50		/* 7bit */
-#define CFG_SDRAM_SPD_SIZE		0x100
-#define CFG_SDRAM_CAS_LATENCY		5		/* (CL=2.5)x2 */
+#define CONFIG_SYS_SDRAM_TOTAL_BANKS		1
+#define CONFIG_SYS_SDRAM_SPD_I2C_ADDR		0x50		/* 7bit */
+#define CONFIG_SYS_SDRAM_SPD_SIZE		0x100
+#define CONFIG_SYS_SDRAM_CAS_LATENCY		5		/* (CL=2.5)x2 */
 
 /* SDRAM drive strength register (for SSTL_2 class II)*/
-#define CFG_SDRAM_DRIVE_STRENGTH	((DRIVE_STRENGTH_HIGH << SDRAMDS_SBE_SHIFT) | \
+#define CONFIG_SYS_SDRAM_DRIVE_STRENGTH	((DRIVE_STRENGTH_HIGH << SDRAMDS_SBE_SHIFT) | \
 					 (DRIVE_STRENGTH_HIGH << SDRAMDS_SBC_SHIFT) | \
 					 (DRIVE_STRENGTH_HIGH << SDRAMDS_SBA_SHIFT) | \
 					 (DRIVE_STRENGTH_HIGH << SDRAMDS_SBS_SHIFT) | \
@@ -267,38 +267,38 @@
 /*
  * Miscellaneous configurable options
  */
-#define CFG_LONGHELP			    /* undef to save memory	*/
-#define CFG_PROMPT		"=> "	    /* Monitor Command Prompt	*/
+#define CONFIG_SYS_LONGHELP			    /* undef to save memory	*/
+#define CONFIG_SYS_PROMPT		"=> "	    /* Monitor Command Prompt	*/
 #if defined(CONFIG_CMD_KGDB)
-#define CFG_CBSIZE		1024	    /* Console I/O Buffer Size	*/
+#define CONFIG_SYS_CBSIZE		1024	    /* Console I/O Buffer Size	*/
 #else
-#define CFG_CBSIZE		256	    /* Console I/O Buffer Size	*/
+#define CONFIG_SYS_CBSIZE		256	    /* Console I/O Buffer Size	*/
 #endif
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16)	/* Print Buffer Size */
-#define CFG_MAXARGS		16	    /* max number of command args   */
-#define CFG_BARGSIZE		CFG_CBSIZE  /* Boot Argument Buffer Size    */
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)	/* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS		16	    /* max number of command args   */
+#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE  /* Boot Argument Buffer Size    */
 
-#define CFG_MEMTEST_START	0x00100000  /* memtest works on */
-#define CFG_MEMTEST_END		0x00f00000  /* 1 ... 15 MB in DRAM  */
+#define CONFIG_SYS_MEMTEST_START	0x00100000  /* memtest works on */
+#define CONFIG_SYS_MEMTEST_END		0x00f00000  /* 1 ... 15 MB in DRAM  */
 
-#define CFG_LOAD_ADDR		0x100000    /* default load address */
+#define CONFIG_SYS_LOAD_ADDR		0x100000    /* default load address */
 
-#define CFG_HZ			1000	    /* decrementer freq: 1 ms ticks */
+#define CONFIG_SYS_HZ			1000	    /* decrementer freq: 1 ms ticks */
 
-#define CFG_CACHELINE_SIZE	32	/* For MPC8220 CPUs */
+#define CONFIG_SYS_CACHELINE_SIZE	32	/* For MPC8220 CPUs */
 #if defined(CONFIG_CMD_KGDB)
-#  define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value */
+#  define CONFIG_SYS_CACHELINE_SHIFT	5	/* log base 2 of the above value */
 #endif
 
 /*
  * Various low-level settings
  */
-#define CFG_HID0_INIT		0
-#define CFG_HID0_FINAL		0
+#define CONFIG_SYS_HID0_INIT		0
+#define CONFIG_SYS_HID0_FINAL		0
 
 /*
-#define CFG_HID0_INIT           HID0_ICE | HID0_ICFI
-#define CFG_HID0_FINAL          HID0_ICE
+#define CONFIG_SYS_HID0_INIT           HID0_ICE | HID0_ICFI
+#define CONFIG_SYS_HID0_FINAL          HID0_ICE
 */
 
 #endif /* __CONFIG_H */
diff --git a/include/configs/spc1920.h b/include/configs/spc1920.h
index daaa23f48..1fe2a04ce 100644
--- a/include/configs/spc1920.h
+++ b/include/configs/spc1920.h
@@ -40,14 +40,14 @@
 #define CONFIG_BAUDRATE		19200
 
 /* use PLD CLK4 instead of brg */
-#define CFG_SPC1920_SMC1_CLK4
+#define CONFIG_SYS_SPC1920_SMC1_CLK4
 
 #define CONFIG_8xx_OSCLK		10000000 /* 10 MHz oscillator on EXTCLK  */
 #define CONFIG_8xx_CPUCLK_DEFAULT	50000000
-#define CFG_8xx_CPUCLK_MIN		40000000
-#define CFG_8xx_CPUCLK_MAX		133000000
+#define CONFIG_SYS_8xx_CPUCLK_MIN		40000000
+#define CONFIG_SYS_8xx_CPUCLK_MAX		133000000
 
-#define CFG_RESET_ADDRESS		0xC0000000
+#define CONFIG_SYS_RESET_ADDRESS		0xC0000000
 
 #define CONFIG_BOARD_EARLY_INIT_F
 #define CONFIG_LAST_STAGE_INIT
@@ -105,26 +105,26 @@
 /*
  * Miscellaneous configurable options
  */
-#define	CFG_LONGHELP				/* undef to save memory		*/
-#define	CFG_PROMPT		"=>"		/* Monitor Command Prompt	*/
-#define CFG_HUSH_PARSER
-#define CFG_PROMPT_HUSH_PS2	"> "
+#define	CONFIG_SYS_LONGHELP				/* undef to save memory		*/
+#define	CONFIG_SYS_PROMPT		"=>"		/* Monitor Command Prompt	*/
+#define CONFIG_SYS_HUSH_PARSER
+#define CONFIG_SYS_PROMPT_HUSH_PS2	"> "
 
 #if defined(CONFIG_CMD_KGDB)
-#define	CFG_CBSIZE		1024		/* Console I/O Buffer Size	*/
+#define	CONFIG_SYS_CBSIZE		1024		/* Console I/O Buffer Size	*/
 #else
-#define	CFG_CBSIZE		256		/* Console I/O Buffer Size	*/
+#define	CONFIG_SYS_CBSIZE		256		/* Console I/O Buffer Size	*/
 #endif
 
-#define	CFG_PBSIZE (CFG_CBSIZE + sizeof(CFG_PROMPT) + 16) /* Print Buffer Size	*/
-#define	CFG_MAXARGS		16		/* max number of command args	*/
-#define CFG_BARGSIZE		CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+#define	CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) /* Print Buffer Size	*/
+#define	CONFIG_SYS_MAXARGS		16		/* max number of command args	*/
+#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
 
-#define CFG_LOAD_ADDR		0x00100000
+#define CONFIG_SYS_LOAD_ADDR		0x00100000
 
-#define	CFG_HZ		        1000	/* decrementer freq: 1 ms ticks */
+#define	CONFIG_SYS_HZ		        1000	/* decrementer freq: 1 ms ticks */
 
-#define CFG_BAUDRATE_TABLE	{ 2400, 4800, 9600, 19200 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 2400, 4800, 9600, 19200 }
 
 /*
  * Low Level Configuration Settings
@@ -135,42 +135,42 @@
 /*-----------------------------------------------------------------------
  * Internal Memory Mapped Register
  */
-#define CFG_IMMR		0xF0000000
+#define CONFIG_SYS_IMMR		0xF0000000
 
 /*-----------------------------------------------------------------------
  * Definitions for initial stack pointer and data area (in DPRAM)
  */
-#define CFG_INIT_RAM_ADDR	CFG_IMMR
-#define	CFG_INIT_RAM_END	0x2F00	/* End of used area in DPRAM	*/
-#define	CFG_GBL_DATA_SIZE	64  /* size in bytes reserved for initial data */
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define	CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_IMMR
+#define	CONFIG_SYS_INIT_RAM_END	0x2F00	/* End of used area in DPRAM	*/
+#define	CONFIG_SYS_GBL_DATA_SIZE	64  /* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define	CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
 /*-----------------------------------------------------------------------
  * Start addresses for the final memory configuration
  * (Set up by the startup code)
- * Please note that CFG_SDRAM_BASE _must_ start at 0
+ * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
  */
-#define CFG_MEMTEST_START	0x0400000	/* memtest works on	*/
-#define CFG_MEMTEST_END		0x0C00000	/* 4 ... 12 MB in DRAM	*/
+#define CONFIG_SYS_MEMTEST_START	0x0400000	/* memtest works on	*/
+#define CONFIG_SYS_MEMTEST_END		0x0C00000	/* 4 ... 12 MB in DRAM	*/
 
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define	CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux	*/
+#define	CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux	*/
 
-#define CFG_MONITOR_BASE	TEXT_BASE
-#define	CFG_MONITOR_LEN		(256 << 10)	/* Reserve 256 KB for monitor	*/
+#define CONFIG_SYS_MONITOR_BASE	TEXT_BASE
+#define	CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 256 KB for monitor	*/
 
 #ifdef CONFIG_BZIP2
-#define	CFG_MALLOC_LEN		(2500 << 10)	/* Reserve ~2.5 MB for malloc()	*/
+#define	CONFIG_SYS_MALLOC_LEN		(2500 << 10)	/* Reserve ~2.5 MB for malloc()	*/
 #else
-#define	CFG_MALLOC_LEN		(384 << 10)	/* Reserve 384 kB for malloc()	*/
+#define	CONFIG_SYS_MALLOC_LEN		(384 << 10)	/* Reserve 384 kB for malloc()	*/
 #endif /* CONFIG_BZIP2 */
 
-#define	CFG_ALLOC_DPRAM		1	/* use allocation routines	*/
+#define	CONFIG_SYS_ALLOC_DPRAM		1	/* use allocation routines	*/
 
 /*
  * Flash
@@ -178,28 +178,28 @@
 /*-----------------------------------------------------------------------
  * Flash organisation
  */
-#define CFG_FLASH_BASE          0xFE000000
-#define CFG_FLASH_CFI                           /* The flash is CFI compatible  */
+#define CONFIG_SYS_FLASH_BASE          0xFE000000
+#define CONFIG_SYS_FLASH_CFI                           /* The flash is CFI compatible  */
 #define CONFIG_FLASH_CFI_DRIVER                    /* Use common CFI driver        */
-#define CFG_MAX_FLASH_BANKS     1               /* Max number of flash banks    */
-#define CFG_MAX_FLASH_SECT      128             /* Max num of sects on one chip */
+#define CONFIG_SYS_MAX_FLASH_BANKS     1               /* Max number of flash banks    */
+#define CONFIG_SYS_MAX_FLASH_SECT      128             /* Max num of sects on one chip */
 
 /* Environment is in flash */
-#define CFG_ENV_IS_IN_FLASH
-#define CFG_ENV_SECT_SIZE       0x40000         /* We use one complete sector   */
-#define CFG_ENV_ADDR		(CFG_MONITOR_BASE + CFG_MONITOR_LEN)
+#define CONFIG_ENV_IS_IN_FLASH
+#define CONFIG_ENV_SECT_SIZE       0x40000         /* We use one complete sector   */
+#define CONFIG_ENV_ADDR		(CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)
 
 #define CONFIG_ENV_OVERWRITE
 
 /*-----------------------------------------------------------------------
  * Cache Configuration
  */
-#define CFG_CACHELINE_SIZE	16	/* For all MPC8xx CPUs			*/
-#define CFG_CACHELINE_SHIFT	4	/* log base 2 of the above value	*/
+#define CONFIG_SYS_CACHELINE_SIZE	16	/* For all MPC8xx CPUs			*/
+#define CONFIG_SYS_CACHELINE_SHIFT	4	/* log base 2 of the above value	*/
 
 #ifdef CONFIG_CMD_DATE
 # define CONFIG_RTC_DS3231
-# define CFG_I2C_RTC_ADDR      0x68
+# define CONFIG_SYS_I2C_RTC_ADDR      0x68
 #endif
 
 /*-----------------------------------------------------------------------
@@ -210,8 +210,8 @@
 #undef CONFIG_HARD_I2C                 /* I2C with hardware support    */
 #define CONFIG_SOFT_I2C                1       /* I2C bit-banged               */
 
-#define CFG_I2C_SPEED          93000   /* 93 kHz is supposed to work   */
-#define CFG_I2C_SLAVE          0xFE
+#define CONFIG_SYS_I2C_SPEED          93000   /* 93 kHz is supposed to work   */
+#define CONFIG_SYS_I2C_SLAVE          0xFE
 
 #ifdef CONFIG_SOFT_I2C
 /*
@@ -239,10 +239,10 @@
  * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze
  */
 #if defined(CONFIG_WATCHDOG)
-#define CFG_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
+#define CONFIG_SYS_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
 			 SYPCR_SWE  | SYPCR_SWRI| SYPCR_SWP)
 #else
-#define CFG_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
+#define CONFIG_SYS_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
 #endif
 
 /*-----------------------------------------------------------------------
@@ -250,21 +250,21 @@
  *-----------------------------------------------------------------------
  * PCMCIA config., multi-function pin tri-state
  */
-#define CFG_SIUMCR      (SIUMCR_FRC)
+#define CONFIG_SYS_SIUMCR      (SIUMCR_FRC)
 
 /*-----------------------------------------------------------------------
  * TBSCR - Time Base Status and Control				11-26
  *-----------------------------------------------------------------------
  * Clear Reference Interrupt Status, Timebase freezing enabled
  */
-#define CFG_TBSCR	(TBSCR_REFA | TBSCR_REFB | TBSCR_TBE)
+#define CONFIG_SYS_TBSCR	(TBSCR_REFA | TBSCR_REFB | TBSCR_TBE)
 
 /*-----------------------------------------------------------------------
  * PISCR - Periodic Interrupt Status and Control		11-31
  *-----------------------------------------------------------------------
  * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
  */
-#define CFG_PISCR	(PISCR_PS | PISCR_PITF)
+#define CONFIG_SYS_PISCR	(PISCR_PS | PISCR_PITF)
 
 /*-----------------------------------------------------------------------
  * SCCR - System Clock and reset Control Register		15-27
@@ -273,8 +273,8 @@
  * power management and some other internal clocks
  */
 #define SCCR_MASK	SCCR_EBDF11
-/* #define CFG_SCCR	SCCR_TBS */
-#define CFG_SCCR	(SCCR_COM00   | SCCR_DFSYNC00 | SCCR_DFBRG00  | \
+/* #define CONFIG_SYS_SCCR	SCCR_TBS */
+#define CONFIG_SYS_SCCR	(SCCR_COM00   | SCCR_DFSYNC00 | SCCR_DFBRG00  | \
 			 SCCR_DFNL000 | SCCR_DFNH000  | SCCR_DFLCD000 | \
 			 SCCR_DFALCD00)
 
@@ -283,7 +283,7 @@
  *-----------------------------------------------------------------------
  * Set to zero to prevent the processor from entering debug mode
  */
-#define CFG_DER		 0
+#define CONFIG_SYS_DER		 0
 
 
 /* Because of the way the 860 starts up and assigns CS0 the entire
@@ -299,51 +299,51 @@
  */
 
 /* BR0 and OR0 (FLASH) */
-#define FLASH_BASE0_PRELIM	CFG_FLASH_BASE	/* FLASH bank #0 */
+#define FLASH_BASE0_PRELIM	CONFIG_SYS_FLASH_BASE	/* FLASH bank #0 */
 
 
 /* used to re-map FLASH both when starting from SRAM or FLASH:
  * restrict access enough to keep SRAM working (if any)
  * but not too much to meddle with FLASH accesses
  */
-#define CFG_REMAP_OR_AM		0x80000000	/* OR addr mask */
-#define CFG_PRELIM_OR_AM	0xE0000000	/* OR addr mask */
+#define CONFIG_SYS_REMAP_OR_AM		0x80000000	/* OR addr mask */
+#define CONFIG_SYS_PRELIM_OR_AM	0xE0000000	/* OR addr mask */
 
 /*
  * FLASH timing:
  */
-#define CFG_OR_TIMING_FLASH	(OR_ACS_DIV1  | OR_TRLX | OR_CSNT_SAM | \
+#define CONFIG_SYS_OR_TIMING_FLASH	(OR_ACS_DIV1  | OR_TRLX | OR_CSNT_SAM | \
 				 OR_SCY_6_CLK | OR_EHTR | OR_BI)
 
-#define CFG_OR0_REMAP	(CFG_REMAP_OR_AM  | CFG_OR_TIMING_FLASH)
-#define CFG_OR0_PRELIM	(CFG_PRELIM_OR_AM | CFG_OR_TIMING_FLASH)
-#define CFG_BR0_PRELIM	((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_V )
+#define CONFIG_SYS_OR0_REMAP	(CONFIG_SYS_REMAP_OR_AM  | CONFIG_SYS_OR_TIMING_FLASH)
+#define CONFIG_SYS_OR0_PRELIM	(CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_FLASH)
+#define CONFIG_SYS_BR0_PRELIM	((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_V )
 
 
 /*
  * SDRAM CS1 UPMB
  */
-#define	CFG_SDRAM_BASE	0x00000000
-#define CFG_SDRAM_BASE_PRELIM CFG_SDRAM_BASE
+#define	CONFIG_SYS_SDRAM_BASE	0x00000000
+#define CONFIG_SYS_SDRAM_BASE_PRELIM CONFIG_SYS_SDRAM_BASE
 #define SDRAM_MAX_SIZE	0x4000000 /* max 64 MB */
 
-#define CFG_PRELIM_OR1_AM	0xF0000000
-/* #define CFG_OR1_TIMING  OR_CSNT_SAM/\*  | OR_G5LS /\\* *\\/ *\/ */
+#define CONFIG_SYS_PRELIM_OR1_AM	0xF0000000
+/* #define CONFIG_SYS_OR1_TIMING  OR_CSNT_SAM/\*  | OR_G5LS /\\* *\\/ *\/ */
 #define SDRAM_TIMING	OR_SCY_0_CLK	/* SDRAM-Timing */
 
-#define CFG_OR1_PRELIM	(CFG_PRELIM_OR1_AM | OR_CSNT_SAM | OR_G5LS | SDRAM_TIMING)
-#define CFG_BR1_PRELIM  ((CFG_SDRAM_BASE_PRELIM & BR_BA_MSK) | BR_MS_UPMB | BR_V)
+#define CONFIG_SYS_OR1_PRELIM	(CONFIG_SYS_PRELIM_OR1_AM | OR_CSNT_SAM | OR_G5LS | SDRAM_TIMING)
+#define CONFIG_SYS_BR1_PRELIM  ((CONFIG_SYS_SDRAM_BASE_PRELIM & BR_BA_MSK) | BR_MS_UPMB | BR_V)
 
-/* #define CFG_OR1_FINAL   ((CFG_OR1_AM & OR_AM_MSK) | CFG_OR1_TIMING) */
-/* #define CFG_BR1_FINAL   ((CFG_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMB | BR_V) */
+/* #define CONFIG_SYS_OR1_FINAL   ((CONFIG_SYS_OR1_AM & OR_AM_MSK) | CONFIG_SYS_OR1_TIMING) */
+/* #define CONFIG_SYS_BR1_FINAL   ((CONFIG_SYS_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMB | BR_V) */
 
-#define CFG_PTB_PER_CLK	((4096 * 16 * 1000) / (4 * 64))
-#define CFG_PTA_PER_CLK 195
-#define CFG_MBMR_PTB	195
-#define CFG_MPTPR	MPTPR_PTP_DIV16
-#define CFG_MAR		0x88
+#define CONFIG_SYS_PTB_PER_CLK	((4096 * 16 * 1000) / (4 * 64))
+#define CONFIG_SYS_PTA_PER_CLK 195
+#define CONFIG_SYS_MBMR_PTB	195
+#define CONFIG_SYS_MPTPR	MPTPR_PTP_DIV16
+#define CONFIG_SYS_MAR		0x88
 
-#define CFG_MBMR_8COL  ((CFG_MBMR_PTB << MBMR_PTB_SHIFT) | \
+#define CONFIG_SYS_MBMR_8COL  ((CONFIG_SYS_MBMR_PTB << MBMR_PTB_SHIFT) | \
 			MBMR_AMB_TYPE_0 | \
 			MBMR_G0CLB_A10 | \
 			MBMR_DSB_1_CYCL | \
@@ -351,7 +351,7 @@
 			MBMR_WLFB_1X | \
 			MBMR_TLFB_4X) /* 0x04804114 */ /* 0x10802114 */
 
-#define CFG_MBMR_9COL  ((CFG_MBMR_PTB << MBMR_PTB_SHIFT) | \
+#define CONFIG_SYS_MBMR_9COL  ((CONFIG_SYS_MBMR_PTB << MBMR_PTB_SHIFT) | \
 			MBMR_AMB_TYPE_1 | \
 			MBMR_G0CLB_A10 | \
 			MBMR_DSB_1_CYCL | \
@@ -363,27 +363,27 @@
 /*
  * DSP Host Port Interface CS3
  */
-#define CFG_SPC1920_HPI_BASE   0x90000000
-#define CFG_PRELIM_OR3_AM      0xF8000000
+#define CONFIG_SYS_SPC1920_HPI_BASE   0x90000000
+#define CONFIG_SYS_PRELIM_OR3_AM      0xF8000000
 
-#define CFG_OR3         (CFG_PRELIM_OR3_AM | \
+#define CONFIG_SYS_OR3         (CONFIG_SYS_PRELIM_OR3_AM | \
 				       OR_G5LS | \
 				       OR_SCY_0_CLK | \
 				       OR_BI)
 
-#define CFG_BR3 ((CFG_SPC1920_HPI_BASE & BR_BA_MSK) | \
+#define CONFIG_SYS_BR3 ((CONFIG_SYS_SPC1920_HPI_BASE & BR_BA_MSK) | \
 					       BR_MS_UPMA | \
 					       BR_PS_16 | \
-					       BR_V);
+					       BR_V)
 
-#define CFG_MAMR (MAMR_GPL_A4DIS | \
+#define CONFIG_SYS_MAMR (MAMR_GPL_A4DIS | \
 		MAMR_RLFA_5X | \
 		MAMR_WLFA_5X)
 
 #define CONFIG_SPC1920_HPI_TEST
 
 #ifdef CONFIG_SPC1920_HPI_TEST
-#define HPI_REG(x)             (*((volatile u16 *) (CFG_SPC1920_HPI_BASE + x)))
+#define HPI_REG(x)             (*((volatile u16 *) (CONFIG_SYS_SPC1920_HPI_BASE + x)))
 #define HPI_HPIC_1             HPI_REG(0)
 #define HPI_HPIC_2             HPI_REG(2)
 #define HPI_HPIA_1             HPI_REG(0x2000008)
@@ -397,30 +397,30 @@
 /*
  * Ramtron FM18L08 FRAM 32KB on CS4
  */
-#define CFG_SPC1920_FRAM_BASE	0x80100000
-#define CFG_PRELIM_OR4_AM	0xffff8000
-#define CFG_OR4		(CFG_PRELIM_OR4_AM | \
+#define CONFIG_SYS_SPC1920_FRAM_BASE	0x80100000
+#define CONFIG_SYS_PRELIM_OR4_AM	0xffff8000
+#define CONFIG_SYS_OR4		(CONFIG_SYS_PRELIM_OR4_AM | \
 					OR_ACS_DIV2 | \
 					OR_BI | \
 					OR_SCY_4_CLK | \
 					OR_TRLX)
 
-#define CFG_BR4 ((CFG_SPC1920_FRAM_BASE & BR_BA_MSK) | BR_PS_8 | BR_V);
+#define CONFIG_SYS_BR4 ((CONFIG_SYS_SPC1920_FRAM_BASE & BR_BA_MSK) | BR_PS_8 | BR_V)
 
 /*
  * PLD CS5
  */
-#define CFG_SPC1920_PLD_BASE	0x80000000
-#define CFG_PRELIM_OR5_AM	0xffff8000
+#define CONFIG_SYS_SPC1920_PLD_BASE	0x80000000
+#define CONFIG_SYS_PRELIM_OR5_AM	0xffff8000
 
-#define CFG_OR5_PRELIM		(CFG_PRELIM_OR5_AM | \
+#define CONFIG_SYS_OR5_PRELIM		(CONFIG_SYS_PRELIM_OR5_AM | \
 					OR_CSNT_SAM | \
 					OR_ACS_DIV1 | \
 					OR_BI | \
 					OR_SCY_0_CLK | \
 					OR_TRLX)
 
-#define CFG_BR5_PRELIM ((CFG_SPC1920_PLD_BASE & BR_BA_MSK) | BR_PS_8 | BR_V);
+#define CONFIG_SYS_BR5_PRELIM ((CONFIG_SYS_SPC1920_PLD_BASE & BR_BA_MSK) | BR_PS_8 | BR_V)
 
 /*
  * Internal Definitions
diff --git a/include/configs/spieval.h b/include/configs/spieval.h
index 93798a46f..27dda253f 100644
--- a/include/configs/spieval.h
+++ b/include/configs/spieval.h
@@ -39,7 +39,7 @@
 #define CONFIG_STK52XX		1	/* ... on a STK52XX base board */
 #define CONFIG_STK52XX_REV100	1	/*  define for revision 100 baseboards */
 
-#define CFG_MPC5XXX_CLKIN	33000000 /* ... running at 33.000000MHz */
+#define CONFIG_SYS_MPC5XXX_CLKIN	33000000 /* ... running at 33.000000MHz */
 
 #define BOOTFLAG_COLD		0x01	/* Normal Power-On: Boot from FLASH  */
 #define BOOTFLAG_WARM		0x02	/* Software reboot	     */
@@ -51,13 +51,13 @@
  */
 #define CONFIG_PSC_CONSOLE	6	/* console is on PSC6 */
 #define CONFIG_BAUDRATE		115200	/* ... at 115200 bps */
-#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
 
 #ifdef CONFIG_STK52XX
 #undef CONFIG_PS2KBD			/* AT-PS/2 Keyboard		*/
 #define CONFIG_PS2MULT			/* .. on PS/2 Multiplexer	*/
 #define CONFIG_PS2SERIAL	6	/* .. on PSC6			*/
-#define CONFIG_PS2MULT_DELAY	(CFG_HZ/2)	/* Initial delay	*/
+#define CONFIG_PS2MULT_DELAY	(CONFIG_SYS_HZ/2)	/* Initial delay	*/
 #define CONFIG_BOARD_EARLY_INIT_R
 #endif /* CONFIG_STK52XX */
 
@@ -81,7 +81,7 @@
 
 #define CONFIG_NET_MULTI	1
 #define CONFIG_EEPRO100		1
-#define CFG_RX_ETH_BUFFER	8  /* use 8 rx buffer on eepro100  */
+#define CONFIG_SYS_RX_ETH_BUFFER	8  /* use 8 rx buffer on eepro100  */
 #define CONFIG_NS8382X		1
 #endif	/* CONFIG_STK52XX */
 
@@ -98,7 +98,7 @@
 #define CONFIG_CONSOLE_EXTRA_INFO
 #define CONFIG_VIDEO_SW_CURSOR
 #define CONFIG_SPLASH_SCREEN
-#define CFG_CONSOLE_IS_IN_ENV
+#define CONFIG_SYS_CONSOLE_IS_IN_ENV
 #endif
 
 /* Partitions */
@@ -113,9 +113,9 @@
 #endif
 
 /* POST support */
-#define CONFIG_POST		(CFG_POST_MEMORY   | \
-				 CFG_POST_CPU	   | \
-				 CFG_POST_I2C)
+#define CONFIG_POST		(CONFIG_SYS_POST_MEMORY   | \
+				 CONFIG_SYS_POST_CPU	   | \
+				 CONFIG_SYS_POST_I2C)
 
 #ifdef CONFIG_POST
 /* preserve space for the post_word at end of on-chip SRAM */
@@ -177,7 +177,7 @@
 #define	CONFIG_TIMESTAMP		/* display image timestamps */
 
 #if (TEXT_BASE == 0xFC000000)		/* Boot low */
-#   define CFG_LOWBOOT		1
+#   define CONFIG_SYS_LOWBOOT		1
 #endif
 
 /*
@@ -219,17 +219,17 @@
 /*
  * IPB Bus clocking configuration.
  */
-#define CFG_IPBCLK_EQUALS_XLBCLK		/* define for 133MHz speed */
+#define CONFIG_SYS_IPBCLK_EQUALS_XLBCLK		/* define for 133MHz speed */
 
-#if defined(CFG_IPBCLK_EQUALS_XLBCLK)
+#if defined(CONFIG_SYS_IPBCLK_EQUALS_XLBCLK)
 /*
  * PCI Bus clocking configuration
  *
  * Actually a PCI Clock of 66 MHz is only set (in cpu_init.c) if
- * CFG_IPBCLK_EQUALS_XLBCLK is defined. This is because a PCI Clock
+ * CONFIG_SYS_IPBCLK_EQUALS_XLBCLK is defined. This is because a PCI Clock
  * of 66 MHz yet hasn't been tested with a IPB Bus Clock of 66 MHz.
  */
-#define CFG_PCICLK_EQUALS_IPBCLK_DIV2	/* define for 66MHz speed */
+#define CONFIG_SYS_PCICLK_EQUALS_IPBCLK_DIV2	/* define for 66MHz speed */
 #endif
 
 /*
@@ -237,9 +237,9 @@
  */
 #define CONFIG_HARD_I2C		1	/* I2C with hardware support */
 #ifdef CONFIG_TQM5200_REV100
-#define CFG_I2C_MODULE		1	/* Select I2C module #1 for rev. 100 board */
+#define CONFIG_SYS_I2C_MODULE		1	/* Select I2C module #1 for rev. 100 board */
 #else
-#define CFG_I2C_MODULE		2	/* Select I2C module #2 for all other revs */
+#define CONFIG_SYS_I2C_MODULE		2	/* Select I2C module #2 for all other revs */
 #endif
 
 /*
@@ -248,11 +248,11 @@
  * Please notice, that the resulting clock frequency could differ from the
  * configured value. This is because the I2C clock is derived from system
  * clock over a frequency divider with only a few divider values. U-boot
- * calculates the best approximation for CFG_I2C_SPEED. However the calculated
+ * calculates the best approximation for CONFIG_SYS_I2C_SPEED. However the calculated
  * approximation allways lies below the configured value, never above.
  */
-#define CFG_I2C_SPEED		100000 /* 100 kHz */
-#define CFG_I2C_SLAVE		0x7F
+#define CONFIG_SYS_I2C_SPEED		100000 /* 100 kHz */
+#define CONFIG_SYS_I2C_SLAVE		0x7F
 
 /*
  * EEPROM configuration for onboard EEPROM M24C32 (M24C64 should work
@@ -260,89 +260,89 @@
  * EEPROM (24C64) is on the same I2C address (but on other I2C bus), so the
  * same configuration could be used.
  */
-#define CFG_I2C_EEPROM_ADDR		0x50	/* 1010000x */
-#define CFG_I2C_EEPROM_ADDR_LEN		2
-#define CFG_EEPROM_PAGE_WRITE_BITS	5	/* =32 Bytes per write */
-#define CFG_EEPROM_PAGE_WRITE_DELAY_MS	20
+#define CONFIG_SYS_I2C_EEPROM_ADDR		0x50	/* 1010000x */
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN		2
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS	5	/* =32 Bytes per write */
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	20
 
 /*
  * HW-Monitor configuration on Mini-FAP
  */
 #if defined (CONFIG_MINIFAP)
-#define CFG_I2C_HWMON_ADDR		0x2C
+#define CONFIG_SYS_I2C_HWMON_ADDR		0x2C
 #endif
 
 /* List of I2C addresses to be verified by POST */
 #if defined (CONFIG_MINIFAP)
 #undef I2C_ADDR_LIST
-#define I2C_ADDR_LIST	{	CFG_I2C_EEPROM_ADDR,	\
-				CFG_I2C_HWMON_ADDR,	\
-				CFG_I2C_SLAVE }
+#define I2C_ADDR_LIST	{	CONFIG_SYS_I2C_EEPROM_ADDR,	\
+				CONFIG_SYS_I2C_HWMON_ADDR,	\
+				CONFIG_SYS_I2C_SLAVE }
 #endif
 
 /*
  * Flash configuration
  */
-#define CFG_FLASH_BASE		TEXT_BASE /* 0xFC000000 */
+#define CONFIG_SYS_FLASH_BASE		TEXT_BASE /* 0xFC000000 */
 
 /* use CFI flash driver if no module variant is spezified */
-#define CFG_FLASH_CFI		1	/* Flash is CFI conformant */
+#define CONFIG_SYS_FLASH_CFI		1	/* Flash is CFI conformant */
 #define CONFIG_FLASH_CFI_DRIVER	1	/* Use the common driver */
-#define CFG_FLASH_BANKS_LIST	{ CFG_BOOTCS_START }
-#define CFG_FLASH_EMPTY_INFO
-#define CFG_FLASH_SIZE		0x04000000 /* 64 MByte */
-#define CFG_MAX_FLASH_SECT	512	/* max num of sects on one chip */
-#undef CFG_FLASH_USE_BUFFER_WRITE	/* not supported yet for AMD */
-
-#if !defined(CFG_LOWBOOT)
-#define CFG_ENV_ADDR		(CFG_FLASH_BASE + 0x00760000 + 0x00800000)
-#else	/* CFG_LOWBOOT */
-#define CFG_ENV_ADDR		(CFG_FLASH_BASE + 0x00060000)
-#endif	/* CFG_LOWBOOT */
-#define CFG_MAX_FLASH_BANKS	1	/* max num of flash banks
+#define CONFIG_SYS_FLASH_BANKS_LIST	{ CONFIG_SYS_BOOTCS_START }
+#define CONFIG_SYS_FLASH_EMPTY_INFO
+#define CONFIG_SYS_FLASH_SIZE		0x04000000 /* 64 MByte */
+#define CONFIG_SYS_MAX_FLASH_SECT	512	/* max num of sects on one chip */
+#undef CONFIG_SYS_FLASH_USE_BUFFER_WRITE	/* not supported yet for AMD */
+
+#if !defined(CONFIG_SYS_LOWBOOT)
+#define CONFIG_ENV_ADDR		(CONFIG_SYS_FLASH_BASE + 0x00760000 + 0x00800000)
+#else	/* CONFIG_SYS_LOWBOOT */
+#define CONFIG_ENV_ADDR		(CONFIG_SYS_FLASH_BASE + 0x00060000)
+#endif	/* CONFIG_SYS_LOWBOOT */
+#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max num of flash banks
 					   (= chip selects) */
-#define CFG_FLASH_ERASE_TOUT	240000	/* Flash Erase Timeout (in ms)	*/
-#define CFG_FLASH_WRITE_TOUT	500	/* Flash Write Timeout (in ms)	*/
+#define CONFIG_SYS_FLASH_ERASE_TOUT	240000	/* Flash Erase Timeout (in ms)	*/
+#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Flash Write Timeout (in ms)	*/
 
 
 /*
  * Environment settings
  */
-#define CFG_ENV_IS_IN_FLASH	1
-#define CFG_ENV_SIZE		0x10000
-#define CFG_ENV_SECT_SIZE	0x20000
-#define CFG_ENV_ADDR_REDUND	(CFG_ENV_ADDR + CFG_ENV_SECT_SIZE)
-#define	CFG_ENV_SIZE_REDUND	(CFG_ENV_SIZE)
+#define CONFIG_ENV_IS_IN_FLASH	1
+#define CONFIG_ENV_SIZE		0x10000
+#define CONFIG_ENV_SECT_SIZE	0x20000
+#define CONFIG_ENV_ADDR_REDUND	(CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE)
+#define	CONFIG_ENV_SIZE_REDUND	(CONFIG_ENV_SIZE)
 
 /*
  * Memory map
  */
-#define CFG_MBAR		0xF0000000
-#define CFG_SDRAM_BASE		0x00000000
-#define CFG_DEFAULT_MBAR	0x80000000
+#define CONFIG_SYS_MBAR		0xF0000000
+#define CONFIG_SYS_SDRAM_BASE		0x00000000
+#define CONFIG_SYS_DEFAULT_MBAR	0x80000000
 
 /* Use ON-Chip SRAM until RAM will be available */
-#define CFG_INIT_RAM_ADDR	MPC5XXX_SRAM
+#define CONFIG_SYS_INIT_RAM_ADDR	MPC5XXX_SRAM
 #ifdef CONFIG_POST
 /* preserve space for the post_word at end of on-chip SRAM */
-#define CFG_INIT_RAM_END	MPC5XXX_SRAM_POST_SIZE
+#define CONFIG_SYS_INIT_RAM_END	MPC5XXX_SRAM_POST_SIZE
 #else
-#define CFG_INIT_RAM_END	MPC5XXX_SRAM_SIZE
+#define CONFIG_SYS_INIT_RAM_END	MPC5XXX_SRAM_SIZE
 #endif
 
 
-#define CFG_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
-#define CFG_MONITOR_BASE	TEXT_BASE
-#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
-#   define CFG_RAMBOOT		1
+#define CONFIG_SYS_MONITOR_BASE	TEXT_BASE
+#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
+#   define CONFIG_SYS_RAMBOOT		1
 #endif
 
-#define CFG_MONITOR_LEN		(384 << 10)	/* Reserve 384 kB for Monitor	*/
-#define CFG_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/
-#define CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
+#define CONFIG_SYS_MONITOR_LEN		(384 << 10)	/* Reserve 384 kB for Monitor	*/
+#define CONFIG_SYS_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/
+#define CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
 
 /*
  * Ethernet configuration
@@ -381,19 +381,19 @@
  *   tests.
  */
 #if defined (CONFIG_MINIFAP)
-# define CFG_GPS_PORT_CONFIG	0x91000004
+# define CONFIG_SYS_GPS_PORT_CONFIG	0x91000004
 #elif defined (CONFIG_STK52XX)
 # if defined (CONFIG_STK52XX_REV100)
-#  define CFG_GPS_PORT_CONFIG	0x81500014
+#  define CONFIG_SYS_GPS_PORT_CONFIG	0x81500014
 # else /* STK52xx REV200 and above */
 #  if defined (CONFIG_TQM5200_REV100)
 #   error TQM5200 REV100 not supported on STK52XX REV200 or above
 #  else/* TQM5200 REV200 and above */
-#   define CFG_GPS_PORT_CONFIG	0x91500004
+#   define CONFIG_SYS_GPS_PORT_CONFIG	0x91500004
 #  endif
 # endif
 #else  /* TMQ5200 Inbetriebnahme-Board */
-# define CFG_GPS_PORT_CONFIG	0x81000004
+# define CONFIG_SYS_GPS_PORT_CONFIG	0x81000004
 #endif
 
 /*
@@ -404,30 +404,30 @@
 /*
  * Miscellaneous configurable options
  */
-#define CFG_LONGHELP			/* undef to save memory	    */
-#define CFG_PROMPT		"=> "	/* Monitor Command Prompt   */
+#define CONFIG_SYS_LONGHELP			/* undef to save memory	    */
+#define CONFIG_SYS_PROMPT		"=> "	/* Monitor Command Prompt   */
 #if defined(CONFIG_CMD_KGDB)
-#define CFG_CBSIZE		1024	/* Console I/O Buffer Size  */
+#define CONFIG_SYS_CBSIZE		1024	/* Console I/O Buffer Size  */
 #else
-#define CFG_CBSIZE		256	/* Console I/O Buffer Size  */
+#define CONFIG_SYS_CBSIZE		256	/* Console I/O Buffer Size  */
 #endif
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define CFG_MAXARGS		16	/* max number of command args	*/
-#define CFG_BARGSIZE		CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS		16	/* max number of command args	*/
+#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
 
 /* Enable an alternate, more extensive memory test */
-#define CFG_ALT_MEMTEST
+#define CONFIG_SYS_ALT_MEMTEST
 
-#define CFG_MEMTEST_START	0x00100000	/* memtest works on */
-#define CFG_MEMTEST_END		0x00f00000	/* 1 ... 15 MB in DRAM	*/
+#define CONFIG_SYS_MEMTEST_START	0x00100000	/* memtest works on */
+#define CONFIG_SYS_MEMTEST_END		0x00f00000	/* 1 ... 15 MB in DRAM	*/
 
-#define CFG_LOAD_ADDR		0x100000	/* default load address */
+#define CONFIG_SYS_LOAD_ADDR		0x100000	/* default load address */
 
-#define CFG_HZ			1000	/* decrementer freq: 1 ms ticks */
+#define CONFIG_SYS_HZ			1000	/* decrementer freq: 1 ms ticks */
 
-#define CFG_CACHELINE_SIZE	32	/* For MPC5xxx CPUs */
+#define CONFIG_SYS_CACHELINE_SIZE	32	/* For MPC5xxx CPUs */
 #if defined(CONFIG_CMD_KGDB)
-#  define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value */
+#  define CONFIG_SYS_CACHELINE_SHIFT	5	/* log base 2 of the above value */
 #endif
 
 /*
@@ -439,22 +439,22 @@
  * Various low-level settings
  */
 #if defined(CONFIG_MPC5200)
-#define CFG_HID0_INIT		HID0_ICE | HID0_ICFI
-#define CFG_HID0_FINAL		HID0_ICE
+#define CONFIG_SYS_HID0_INIT		HID0_ICE | HID0_ICFI
+#define CONFIG_SYS_HID0_FINAL		HID0_ICE
 #else
-#define CFG_HID0_INIT		0
-#define CFG_HID0_FINAL		0
+#define CONFIG_SYS_HID0_INIT		0
+#define CONFIG_SYS_HID0_FINAL		0
 #endif
 
-#define CFG_BOOTCS_START	CFG_FLASH_BASE
-#define CFG_BOOTCS_SIZE		CFG_FLASH_SIZE
-#ifdef CFG_PCICLK_EQUALS_IPBCLK_DIV2
-#define CFG_BOOTCS_CFG		0x0008DF30 /* for pci_clk  = 66 MHz */
+#define CONFIG_SYS_BOOTCS_START	CONFIG_SYS_FLASH_BASE
+#define CONFIG_SYS_BOOTCS_SIZE		CONFIG_SYS_FLASH_SIZE
+#ifdef CONFIG_SYS_PCICLK_EQUALS_IPBCLK_DIV2
+#define CONFIG_SYS_BOOTCS_CFG		0x0008DF30 /* for pci_clk  = 66 MHz */
 #else
-#define CFG_BOOTCS_CFG		0x0004DF30 /* for pci_clk = 33 MHz */
+#define CONFIG_SYS_BOOTCS_CFG		0x0004DF30 /* for pci_clk = 33 MHz */
 #endif
-#define CFG_CS0_START		CFG_FLASH_BASE
-#define CFG_CS0_SIZE		CFG_FLASH_SIZE
+#define CONFIG_SYS_CS0_START		CONFIG_SYS_FLASH_BASE
+#define CONFIG_SYS_CS0_SIZE		CONFIG_SYS_FLASH_SIZE
 
 #define CONFIG_LAST_STAGE_INIT
 
@@ -462,24 +462,24 @@
  * SRAM - Do not map below 2 GB in address space, because this area is used
  * for SDRAM autosizing.
  */
-#define CFG_CS2_START		0xE5000000
-#define CFG_CS2_SIZE		0x100000	/* 1 MByte */
-#define CFG_CS2_CFG		0x0004D930
+#define CONFIG_SYS_CS2_START		0xE5000000
+#define CONFIG_SYS_CS2_SIZE		0x100000	/* 1 MByte */
+#define CONFIG_SYS_CS2_CFG		0x0004D930
 
 /*
  * Grafic controller - Do not map below 2 GB in address space, because this
  * area is used for SDRAM autosizing.
  */
 #define SM501_FB_BASE		0xE0000000
-#define CFG_CS1_START		(SM501_FB_BASE)
-#define CFG_CS1_SIZE		0x4000000	/* 64 MByte */
-#define CFG_CS1_CFG		0x8F48FF70
-#define SM501_MMIO_BASE		CFG_CS1_START + 0x03E00000
+#define CONFIG_SYS_CS1_START		(SM501_FB_BASE)
+#define CONFIG_SYS_CS1_SIZE		0x4000000	/* 64 MByte */
+#define CONFIG_SYS_CS1_CFG		0x8F48FF70
+#define SM501_MMIO_BASE		CONFIG_SYS_CS1_START + 0x03E00000
 
-#define CFG_CS_BURST		0x00000000
-#define CFG_CS_DEADCYCLE	0x33333311	/* 1 dead cycle for flash and SM501 */
+#define CONFIG_SYS_CS_BURST		0x00000000
+#define CONFIG_SYS_CS_DEADCYCLE	0x33333311	/* 1 dead cycle for flash and SM501 */
 
-#define CFG_RESET_ADDRESS	0xff000000
+#define CONFIG_SYS_RESET_ADDRESS	0xff000000
 
 /*-----------------------------------------------------------------------
  * USB stuff
@@ -501,23 +501,23 @@
 #define CONFIG_IDE_RESET		/* reset for ide supported	*/
 #define CONFIG_IDE_PREINIT
 
-#define CFG_IDE_MAXBUS		1	/* max. 1 IDE bus		*/
-#define CFG_IDE_MAXDEVICE	2	/* max. 2 drives per IDE bus	*/
+#define CONFIG_SYS_IDE_MAXBUS		1	/* max. 1 IDE bus		*/
+#define CONFIG_SYS_IDE_MAXDEVICE	2	/* max. 2 drives per IDE bus	*/
 
-#define CFG_ATA_IDE0_OFFSET	0x0000
+#define CONFIG_SYS_ATA_IDE0_OFFSET	0x0000
 
-#define CFG_ATA_BASE_ADDR	MPC5XXX_ATA
+#define CONFIG_SYS_ATA_BASE_ADDR	MPC5XXX_ATA
 
 /* Offset for data I/O			*/
-#define CFG_ATA_DATA_OFFSET	(0x0060)
+#define CONFIG_SYS_ATA_DATA_OFFSET	(0x0060)
 
 /* Offset for normal register accesses	*/
-#define CFG_ATA_REG_OFFSET	(CFG_ATA_DATA_OFFSET)
+#define CONFIG_SYS_ATA_REG_OFFSET	(CONFIG_SYS_ATA_DATA_OFFSET)
 
 /* Offset for alternate registers	*/
-#define CFG_ATA_ALT_OFFSET	(0x005C)
+#define CONFIG_SYS_ATA_ALT_OFFSET	(0x005C)
 
 /* Interval between registers						     */
-#define CFG_ATA_STRIDE		4
+#define CONFIG_SYS_ATA_STRIDE		4
 
 #endif /* __CONFIG_H */
diff --git a/include/configs/stxgp3.h b/include/configs/stxgp3.h
index ea79de71f..ae6f45aee 100644
--- a/include/configs/stxgp3.h
+++ b/include/configs/stxgp3.h
@@ -64,55 +64,54 @@
  */
 #define CONFIG_L2_CACHE                     /* toggle L2 cache         */
 #define  CONFIG_BTB                          /* toggle branch predition */
-#define  CONFIG_ADDR_STREAMING               /* toggle addr streaming   */
 
 #define CONFIG_BOARD_EARLY_INIT_F   1        /* Call board_pre_init      */
 
-#undef  CFG_DRAM_TEST                       /* memory test, takes time  */
-#define CFG_MEMTEST_START       0x00200000  /* memtest region */
-#define CFG_MEMTEST_END         0x00400000
+#undef  CONFIG_SYS_DRAM_TEST                       /* memory test, takes time  */
+#define CONFIG_SYS_MEMTEST_START       0x00200000  /* memtest region */
+#define CONFIG_SYS_MEMTEST_END         0x00400000
 
 
 /* Localbus SDRAM is an option, not all boards have it.
  * This address, however, is used to configure a 256M local bus
  * window that includes the Config latch below.
  */
-#define CFG_LBC_SDRAM_BASE      0xf0000000      /* Localbus SDRAM */
-#define CFG_LBC_SDRAM_SIZE	256		/* LBC SDRAM is 64MB	*/
+#define CONFIG_SYS_LBC_SDRAM_BASE      0xf0000000      /* Localbus SDRAM */
+#define CONFIG_SYS_LBC_SDRAM_SIZE	256		/* LBC SDRAM is 64MB	*/
 
-#define CFG_FLASH_BASE        0xff000000      /* start of FLASH 16M    */
-#define CFG_BR0_PRELIM        0xff001801      /* port size 32bit      */
+#define CONFIG_SYS_FLASH_BASE        0xff000000      /* start of FLASH 16M    */
+#define CONFIG_SYS_BR0_PRELIM        0xff001801      /* port size 32bit      */
 
-#define CFG_OR0_PRELIM          0xff000ff7      /* 16 MB Flash           */
-#define CFG_MAX_FLASH_BANKS	1		/* number of banks	*/
-#define CFG_MAX_FLASH_SECT	136		/* sectors per device   */
-#undef	CFG_FLASH_CHECKSUM
-#define CFG_FLASH_ERASE_TOUT	60000	/* Timeout for Flash Erase (in ms)	*/
-#define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
+#define CONFIG_SYS_OR0_PRELIM          0xff000ff7      /* 16 MB Flash           */
+#define CONFIG_SYS_MAX_FLASH_BANKS	1		/* number of banks	*/
+#define CONFIG_SYS_MAX_FLASH_SECT	136		/* sectors per device   */
+#undef	CONFIG_SYS_FLASH_CHECKSUM
+#define CONFIG_SYS_FLASH_ERASE_TOUT	60000	/* Timeout for Flash Erase (in ms)	*/
+#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
 
 /* The configuration latch is Chip Select 1.
  * It's an 8-bit latch in the lower 8 bits of the word.
  */
-#define CFG_BR1_PRELIM		0xfc001801	/* 32-bit port */
-#define CFG_OR1_PRELIM		0xffff0ff7      /* 64K is enough */
-#define CFG_LBC_LCLDEVS_BASE	0xfc000000	/* Base of localbus devices */
+#define CONFIG_SYS_BR1_PRELIM		0xfc001801	/* 32-bit port */
+#define CONFIG_SYS_OR1_PRELIM		0xffff0ff7      /* 64K is enough */
+#define CONFIG_SYS_LBC_LCLDEVS_BASE	0xfc000000	/* Base of localbus devices */
 
-#define CFG_MONITOR_BASE	TEXT_BASE	/* start of monitor	*/
+#define CONFIG_SYS_MONITOR_BASE	TEXT_BASE	/* start of monitor	*/
 
-#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
-#define CFG_RAMBOOT
+#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
+#define CONFIG_SYS_RAMBOOT
 #else
-#undef  CFG_RAMBOOT
+#undef  CONFIG_SYS_RAMBOOT
 #endif
 
-#ifdef CFG_RAMBOOT
-#define CFG_CCSRBAR_DEFAULT	0x40000000	/* CCSRBAR by BDI cfg	*/
+#ifdef CONFIG_SYS_RAMBOOT
+#define CONFIG_SYS_CCSRBAR_DEFAULT	0x40000000	/* CCSRBAR by BDI cfg	*/
 #else
-#define CFG_CCSRBAR_DEFAULT	0xff700000	/* CCSRBAR Default	*/
+#define CONFIG_SYS_CCSRBAR_DEFAULT	0xff700000	/* CCSRBAR Default	*/
 #endif
-#define CFG_CCSRBAR             0xfdf00000      /* relocated CCSRBAR    */
-#define CFG_CCSRBAR_PHYS	CFG_CCSRBAR	/* physical addr of CCSRBAR */
-#define CFG_IMMR		CFG_CCSRBAR	/* PQII uses CFG_IMMR	*/
+#define CONFIG_SYS_CCSRBAR             0xfdf00000      /* relocated CCSRBAR    */
+#define CONFIG_SYS_CCSRBAR_PHYS	CONFIG_SYS_CCSRBAR	/* physical addr of CCSRBAR */
+#define CONFIG_SYS_IMMR		CONFIG_SYS_CCSRBAR	/* PQII uses CONFIG_SYS_IMMR	*/
 
 /* DDR Setup */
 #define CONFIG_FSL_DDR1
@@ -126,8 +125,8 @@
 
 #define CONFIG_MEM_INIT_VALUE		0xDeadBeef
 
-#define CFG_DDR_SDRAM_BASE	0x00000000	/* DDR is system memory*/
-#define CFG_SDRAM_BASE		CFG_DDR_SDRAM_BASE
+#define CONFIG_SYS_DDR_SDRAM_BASE	0x00000000	/* DDR is system memory*/
+#define CONFIG_SYS_SDRAM_BASE		CONFIG_SYS_DDR_SDRAM_BASE
 
 #define CONFIG_NUM_DDR_CONTROLLERS	1
 #define CONFIG_DIMM_SLOTS_PER_CTLR	1
@@ -139,29 +138,28 @@
 #undef CONFIG_CLOCKS_IN_MHZ
 
 /* local bus definitions */
-#define CFG_BR2_PRELIM		0xf8001861	/* 64MB localbus SDRAM  */
-#define CFG_OR2_PRELIM		0xfc006901
-#define CFG_LBC_LCRR		0x00030004	/* local bus freq	*/
-#define CFG_LBC_LBCR		0x00000000
-#define CFG_LBC_LSRT		0x20000000
-#define CFG_LBC_MRTPR		0x20000000
-#define CFG_LBC_LSDMR_1		0x2861b723
-#define CFG_LBC_LSDMR_2		0x0861b723
-#define CFG_LBC_LSDMR_3		0x0861b723
-#define CFG_LBC_LSDMR_4		0x1861b723
-#define CFG_LBC_LSDMR_5		0x4061b723
-
-#define CONFIG_L1_INIT_RAM
-#define CFG_INIT_RAM_LOCK	1
-#define CFG_INIT_RAM_ADDR       0x60000000      /* Initial RAM address  */
-#define CFG_INIT_RAM_END	0x4000		/* End of used area in RAM */
-
-#define CFG_GBL_DATA_SIZE	128		/* num bytes initial data */
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
-
-#define CFG_MONITOR_LEN		(256 * 1024)    /* Reserve 256 kB for Mon */
-#define CFG_MALLOC_LEN		(128 * 1024)    /* Reserved for malloc */
+#define CONFIG_SYS_BR2_PRELIM		0xf8001861	/* 64MB localbus SDRAM  */
+#define CONFIG_SYS_OR2_PRELIM		0xfc006901
+#define CONFIG_SYS_LBC_LCRR		0x00030004	/* local bus freq	*/
+#define CONFIG_SYS_LBC_LBCR		0x00000000
+#define CONFIG_SYS_LBC_LSRT		0x20000000
+#define CONFIG_SYS_LBC_MRTPR		0x20000000
+#define CONFIG_SYS_LBC_LSDMR_1		0x2861b723
+#define CONFIG_SYS_LBC_LSDMR_2		0x0861b723
+#define CONFIG_SYS_LBC_LSDMR_3		0x0861b723
+#define CONFIG_SYS_LBC_LSDMR_4		0x1861b723
+#define CONFIG_SYS_LBC_LSDMR_5		0x4061b723
+
+#define CONFIG_SYS_INIT_RAM_LOCK	1
+#define CONFIG_SYS_INIT_RAM_ADDR       0x60000000      /* Initial RAM address  */
+#define CONFIG_SYS_INIT_RAM_END	0x4000		/* End of used area in RAM */
+
+#define CONFIG_SYS_GBL_DATA_SIZE	128		/* num bytes initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
+
+#define CONFIG_SYS_MONITOR_LEN		(256 * 1024)    /* Reserve 256 kB for Mon */
+#define CONFIG_SYS_MALLOC_LEN		(128 * 1024)    /* Reserved for malloc */
 
 /* Serial Port */
 #define CONFIG_CONS_ON_SCC		/* define if console on SCC */
@@ -170,13 +168,13 @@
 
 #define CONFIG_BAUDRATE		38400
 
-#define CFG_BAUDRATE_TABLE  \
+#define CONFIG_SYS_BAUDRATE_TABLE  \
 	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 115200}
 
 /* Use the HUSH parser */
-#define CFG_HUSH_PARSER
-#ifdef  CFG_HUSH_PARSER
-#define CFG_PROMPT_HUSH_PS2 "> "
+#define CONFIG_SYS_HUSH_PARSER
+#ifdef  CONFIG_SYS_HUSH_PARSER
+#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
 #endif
 
 /*
@@ -185,30 +183,30 @@
 #define CONFIG_FSL_I2C		/* Use FSL common I2C driver */
 #define CONFIG_HARD_I2C		/* I2C with hardware support*/
 #undef	CONFIG_SOFT_I2C			/* I2C bit-banged */
-#define CFG_I2C_SPEED		400000	/* I2C speed and slave address	*/
-#define CFG_I2C_SLAVE		0x7F
+#define CONFIG_SYS_I2C_SPEED		400000	/* I2C speed and slave address	*/
+#define CONFIG_SYS_I2C_SLAVE		0x7F
 #if 0
-#define CFG_I2C_NOPROBES        {0x00}  /* Don't probe these addrs */
+#define CONFIG_SYS_I2C_NOPROBES        {0x00}  /* Don't probe these addrs */
 #else
 /* I did the 'if 0' so we could keep the syntax above if ever needed. */
-#undef CFG_I2C_NOPROBES
+#undef CONFIG_SYS_I2C_NOPROBES
 #endif
-#define CFG_I2C_OFFSET		0x3000
+#define CONFIG_SYS_I2C_OFFSET		0x3000
 
 /* RapdIO Map configuration, mapped 1:1.
 */
-#define CFG_RIO_MEM_BASE	0xc0000000
-#define CFG_RIO_MEM_PHYS	CFG_RIO_MEM_BASE
-#define CFG_RIO_MEM_SIZE	0x200000000	/* 512 M */
+#define CONFIG_SYS_RIO_MEM_BASE	0xc0000000
+#define CONFIG_SYS_RIO_MEM_PHYS	CONFIG_SYS_RIO_MEM_BASE
+#define CONFIG_SYS_RIO_MEM_SIZE	0x200000000	/* 512 M */
 
 /* Standard 8560 PCI addressing, mapped 1:1.
 */
-#define CFG_PCI1_MEM_BASE	0x80000000
-#define CFG_PCI1_MEM_PHYS	CFG_PCI1_MEM_BASE
-#define CFG_PCI1_MEM_SIZE	0x20000000	/* 512M */
-#define CFG_PCI1_IO_BASE	0xe2000000
-#define CFG_PCI1_IO_PHYS	CFG_PCI1_IO_BASE
-#define CFG_PCI1_IO_SIZE	0x01000000	/* 16 M */
+#define CONFIG_SYS_PCI1_MEM_BASE	0x80000000
+#define CONFIG_SYS_PCI1_MEM_PHYS	CONFIG_SYS_PCI1_MEM_BASE
+#define CONFIG_SYS_PCI1_MEM_SIZE	0x20000000	/* 512M */
+#define CONFIG_SYS_PCI1_IO_BASE	0xe2000000
+#define CONFIG_SYS_PCI1_IO_PHYS	CONFIG_SYS_PCI1_IO_BASE
+#define CONFIG_SYS_PCI1_IO_SIZE	0x01000000	/* 16 M */
 
 #if defined(CONFIG_PCI)			/* PCI Ethernet card */
 
@@ -225,7 +223,7 @@
 #endif
 
 #undef CONFIG_PCI_SCAN_SHOW
-#define CFG_PCI_SUBSYS_VENDORID 0x1057  /* Motorola */
+#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x1057  /* Motorola */
 
 #endif /* CONFIG_PCI */
 
@@ -263,13 +261,13 @@
    * - Select bus for bd/buffers
    * - Full duplex
    */
-  #define CFG_CMXFCR_MASK       (CMXFCR_FC2 | CMXFCR_RF2CS_MSK | CMXFCR_TF2CS_MSK)
-  #define CFG_CMXFCR_VALUE      (CMXFCR_RF2CS_CLK13 | CMXFCR_TF2CS_CLK14)
-  #define CFG_CPMFCR_RAMTYPE    0
+  #define CONFIG_SYS_CMXFCR_MASK       (CMXFCR_FC2 | CMXFCR_RF2CS_MSK | CMXFCR_TF2CS_MSK)
+  #define CONFIG_SYS_CMXFCR_VALUE      (CMXFCR_RF2CS_CLK13 | CMXFCR_TF2CS_CLK14)
+  #define CONFIG_SYS_CPMFCR_RAMTYPE    0
 #if 0
-  #define CFG_FCC_PSMR          (FCC_PSMR_FDE)
+  #define CONFIG_SYS_FCC_PSMR          (FCC_PSMR_FDE)
 #else
-  #define CFG_FCC_PSMR          0
+  #define CONFIG_SYS_FCC_PSMR          0
 #endif
   #define FETH2_RST		0x01
 #elif (CONFIG_ETHER_INDEX == 3)
@@ -287,16 +285,16 @@
 /* Environment */
 /* We use the top boot sector flash, so we have some 16K sectors for env
  */
-#ifndef CFG_RAMBOOT
-  #define CFG_ENV_IS_IN_FLASH	1
-  #define CFG_ENV_ADDR		(CFG_MONITOR_BASE + 0x60000)
-  #define CFG_ENV_SECT_SIZE	0x4000	/* 16K (one top sector) for env */
-  #define CFG_ENV_SIZE		0x2000
+#ifndef CONFIG_SYS_RAMBOOT
+  #define CONFIG_ENV_IS_IN_FLASH	1
+  #define CONFIG_ENV_ADDR		(CONFIG_SYS_MONITOR_BASE + 0x60000)
+  #define CONFIG_ENV_SECT_SIZE	0x4000	/* 16K (one top sector) for env */
+  #define CONFIG_ENV_SIZE		0x2000
 #else
-  #define CFG_NO_FLASH		1	/* Flash is not usable now	*/
-  #define CFG_ENV_IS_NOWHERE	1	/* Store ENV in memory only	*/
-  #define CFG_ENV_ADDR		(CFG_MONITOR_BASE - 0x1000)
-  #define CFG_ENV_SIZE		0x2000
+  #define CONFIG_SYS_NO_FLASH		1	/* Flash is not usable now	*/
+  #define CONFIG_ENV_IS_NOWHERE	1	/* Store ENV in memory only	*/
+  #define CONFIG_ENV_ADDR		(CONFIG_SYS_MONITOR_BASE - 0x1000)
+  #define CONFIG_ENV_SIZE		0x2000
 #endif
 
 #define CONFIG_BOOTARGS "root=/dev/nfs rw ip=any console=ttyS1,38400"
@@ -304,7 +302,7 @@
 #define CONFIG_BOOTDELAY	3	/* -1 disable autoboot */
 
 #define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
-#define CFG_LOADS_BAUD_CHANGE	1	/* allow baudrate change	*/
+#define CONFIG_SYS_LOADS_BAUD_CHANGE	1	/* allow baudrate change	*/
 
 /*
  * BOOTP options
@@ -323,7 +321,7 @@
 #define CONFIG_CMD_PING
 #define CONFIG_CMD_I2C
 
-#if defined(CFG_RAMBOOT)
+#if defined(CONFIG_SYS_RAMBOOT)
     #undef CONFIG_CMD_ENV
     #undef CONFIG_CMD_LOADS
 #else
@@ -344,25 +342,25 @@
 /*
  * Miscellaneous configurable options
  */
-#define CFG_LONGHELP			/* undef to save memory		*/
-#define CFG_PROMPT	"GPPP=> "	/* Monitor Command Prompt	*/
+#define CONFIG_SYS_LONGHELP			/* undef to save memory		*/
+#define CONFIG_SYS_PROMPT	"GPPP=> "	/* Monitor Command Prompt	*/
 #if defined(CONFIG_CMD_KGDB)
-#define CFG_CBSIZE	1024		/* Console I/O Buffer Size	*/
+#define CONFIG_SYS_CBSIZE	1024		/* Console I/O Buffer Size	*/
 #else
-#define CFG_CBSIZE	256		/* Console I/O Buffer Size	*/
+#define CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size	*/
 #endif
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define CFG_MAXARGS	16		/* max number of command args	*/
-#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size	*/
-#define CFG_LOAD_ADDR	0x1000000	/* default load address */
-#define CFG_HZ		1000		/* decrementer freq: 1 ms ticks */
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS	16		/* max number of command args	*/
+#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
+#define CONFIG_SYS_LOAD_ADDR	0x1000000	/* default load address */
+#define CONFIG_SYS_HZ		1000		/* decrementer freq: 1 ms ticks */
 
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define CFG_BOOTMAPSZ		(8 << 20) /* Initial Memory map for Linux */
+#define CONFIG_SYS_BOOTMAPSZ		(8 << 20) /* Initial Memory map for Linux */
 
 /*
  * Internal Definitions
diff --git a/include/configs/stxssa.h b/include/configs/stxssa.h
index ac349df29..c312f1af9 100644
--- a/include/configs/stxssa.h
+++ b/include/configs/stxssa.h
@@ -64,13 +64,12 @@
  */
 #define CONFIG_L2_CACHE				/* toggle L2 cache	       */
 #define  CONFIG_BTB				/* toggle branch predition */
-#define  CONFIG_ADDR_STREAMING			/* toggle addr streaming	*/
 
 #define CONFIG_BOARD_EARLY_INIT_F   1		/* Call board_pre_init	 */
 
-#undef	CFG_DRAM_TEST				/* memory test, takes time	*/
-#define CFG_MEMTEST_START	0x00200000	/* memtest region */
-#define CFG_MEMTEST_END		0x00400000
+#undef	CONFIG_SYS_DRAM_TEST				/* memory test, takes time	*/
+#define CONFIG_SYS_MEMTEST_START	0x00200000	/* memtest region */
+#define CONFIG_SYS_MEMTEST_END		0x00400000
 
 
 /* Localbus connector.	There are many options that can be
@@ -78,54 +77,54 @@
  * This address, however, is used to configure a 256M local bus
  * window that includes the Config latch below.
  */
-#define CFG_LBC_OPTION_BASE	0xF0000000	/* Localbus Extension */
-#define CFG_LBC_OPTION_SIZE	256		/* 256MB */
+#define CONFIG_SYS_LBC_OPTION_BASE	0xF0000000	/* Localbus Extension */
+#define CONFIG_SYS_LBC_OPTION_SIZE	256		/* 256MB */
 
 /* There are various flash options used, we configure for the largest,
  * which is 64Mbytes.  The CFI works fine and will discover the proper
  * sizes.
  */
 #ifdef CONFIG_STXSSA_4M
-#define CFG_FLASH_BASE		0xFFC00000	/* start of  4 MiB flash */
+#define CONFIG_SYS_FLASH_BASE		0xFFC00000	/* start of  4 MiB flash */
 #else
-#define CFG_FLASH_BASE		0xFC000000	/* start of 64 MiB flash */
+#define CONFIG_SYS_FLASH_BASE		0xFC000000	/* start of 64 MiB flash */
 #endif
-#define CFG_BR0_PRELIM	(CFG_FLASH_BASE | 0x1801) /* port size 32bit	 */
-#define CFG_OR0_PRELIM	(CFG_FLASH_BASE | 0x0FF7)
+#define CONFIG_SYS_BR0_PRELIM	(CONFIG_SYS_FLASH_BASE | 0x1801) /* port size 32bit	 */
+#define CONFIG_SYS_OR0_PRELIM	(CONFIG_SYS_FLASH_BASE | 0x0FF7)
 
-#define CFG_FLASH_CFI		1
+#define CONFIG_SYS_FLASH_CFI		1
 #define CONFIG_FLASH_CFI_DRIVER	1
-#undef CFG_FLASH_USE_BUFFER_WRITE	/* use buffered writes (20x faster) */
-#define CFG_MAX_FLASH_SECT	256	/* max number of sectors on one chip */
-#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks	*/
+#undef CONFIG_SYS_FLASH_USE_BUFFER_WRITE	/* use buffered writes (20x faster) */
+#define CONFIG_SYS_MAX_FLASH_SECT	256	/* max number of sectors on one chip */
+#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks	*/
 
-#define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE }
+#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE }
 
-#define CFG_FLASH_PROTECTION
+#define CONFIG_SYS_FLASH_PROTECTION
 
 /* The configuration latch is Chip Select 1.
  * It's an 8-bit latch in the lower 8 bits of the word.
  */
-#define CFG_LBC_CFGLATCH_BASE	0xFB000000	/* Base of config latch */
-#define CFG_BR1_PRELIM		0xFB001801	/* 32-bit port */
-#define CFG_OR1_PRELIM		0xFFFF0FF7	/* 64K is enough */
+#define CONFIG_SYS_LBC_CFGLATCH_BASE	0xFB000000	/* Base of config latch */
+#define CONFIG_SYS_BR1_PRELIM		0xFB001801	/* 32-bit port */
+#define CONFIG_SYS_OR1_PRELIM		0xFFFF0FF7	/* 64K is enough */
 
-#define CFG_MONITOR_BASE	TEXT_BASE	/* start of monitor	*/
+#define CONFIG_SYS_MONITOR_BASE	TEXT_BASE	/* start of monitor	*/
 
-#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
-#define CFG_RAMBOOT
+#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
+#define CONFIG_SYS_RAMBOOT
 #else
-#undef	CFG_RAMBOOT
+#undef	CONFIG_SYS_RAMBOOT
 #endif
 
-#ifdef CFG_RAMBOOT
-#define CFG_CCSRBAR_DEFAULT	0x40000000	/* CCSRBAR by BDI cfg	*/
+#ifdef CONFIG_SYS_RAMBOOT
+#define CONFIG_SYS_CCSRBAR_DEFAULT	0x40000000	/* CCSRBAR by BDI cfg	*/
 #else
-#define CFG_CCSRBAR_DEFAULT	0xff700000	/* CCSRBAR Default	*/
+#define CONFIG_SYS_CCSRBAR_DEFAULT	0xff700000	/* CCSRBAR Default	*/
 #endif
-#define CFG_CCSRBAR		0xe0000000	/* relocated CCSRBAR	*/
-#define CFG_CCSRBAR_PHYS	CFG_CCSRBAR	/* physical addr of CCSRBAR */
-#define CFG_IMMR		CFG_CCSRBAR	/* PQII uses CFG_IMMR	*/
+#define CONFIG_SYS_CCSRBAR		0xe0000000	/* relocated CCSRBAR	*/
+#define CONFIG_SYS_CCSRBAR_PHYS	CONFIG_SYS_CCSRBAR	/* physical addr of CCSRBAR */
+#define CONFIG_SYS_IMMR		CONFIG_SYS_CCSRBAR	/* PQII uses CONFIG_SYS_IMMR	*/
 
 /* DDR Setup */
 #define CONFIG_FSL_DDR1
@@ -139,8 +138,8 @@
 
 #define CONFIG_MEM_INIT_VALUE		0xDeadBeef
 
-#define CFG_DDR_SDRAM_BASE	0x00000000	/* DDR is system memory*/
-#define CFG_SDRAM_BASE		CFG_DDR_SDRAM_BASE
+#define CONFIG_SYS_DDR_SDRAM_BASE	0x00000000	/* DDR is system memory*/
+#define CONFIG_SYS_SDRAM_BASE		CONFIG_SYS_DDR_SDRAM_BASE
 
 #define CONFIG_NUM_DDR_CONTROLLERS	1
 #define CONFIG_DIMM_SLOTS_PER_CTLR	1
@@ -152,48 +151,47 @@
 #undef CONFIG_CLOCKS_IN_MHZ
 
 /* local bus definitions */
-#define CFG_BR2_PRELIM		0xf8001861	/* 64MB localbus SDRAM	*/
-#define CFG_OR2_PRELIM		0xfc006901
-#define CFG_LBC_LCRR		0x00030004	/* local bus freq	*/
-#define CFG_LBC_LBCR		0x00000000
-#define CFG_LBC_LSRT		0x20000000
-#define CFG_LBC_MRTPR		0x20000000
-#define CFG_LBC_LSDMR_1		0x2861b723
-#define CFG_LBC_LSDMR_2		0x0861b723
-#define CFG_LBC_LSDMR_3		0x0861b723
-#define CFG_LBC_LSDMR_4		0x1861b723
-#define CFG_LBC_LSDMR_5		0x4061b723
-
-#define CONFIG_L1_INIT_RAM
-#define CFG_INIT_RAM_LOCK	1
-#define CFG_INIT_RAM_ADDR	0x60000000	/* Initial RAM address	*/
-#define CFG_INIT_RAM_END	0x4000		/* End of used area in RAM */
-
-#define CFG_GBL_DATA_SIZE	128		/* num bytes initial data */
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
-
-#define CFG_MONITOR_LEN		(256 * 1024)	/* Reserve 256 kB for Mon */
-#define CFG_MALLOC_LEN		(512 * 1024)	/* Reserved for malloc */
+#define CONFIG_SYS_BR2_PRELIM		0xf8001861	/* 64MB localbus SDRAM	*/
+#define CONFIG_SYS_OR2_PRELIM		0xfc006901
+#define CONFIG_SYS_LBC_LCRR		0x00030004	/* local bus freq	*/
+#define CONFIG_SYS_LBC_LBCR		0x00000000
+#define CONFIG_SYS_LBC_LSRT		0x20000000
+#define CONFIG_SYS_LBC_MRTPR		0x20000000
+#define CONFIG_SYS_LBC_LSDMR_1		0x2861b723
+#define CONFIG_SYS_LBC_LSDMR_2		0x0861b723
+#define CONFIG_SYS_LBC_LSDMR_3		0x0861b723
+#define CONFIG_SYS_LBC_LSDMR_4		0x1861b723
+#define CONFIG_SYS_LBC_LSDMR_5		0x4061b723
+
+#define CONFIG_SYS_INIT_RAM_LOCK	1
+#define CONFIG_SYS_INIT_RAM_ADDR	0x60000000	/* Initial RAM address	*/
+#define CONFIG_SYS_INIT_RAM_END	0x4000		/* End of used area in RAM */
+
+#define CONFIG_SYS_GBL_DATA_SIZE	128		/* num bytes initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
+
+#define CONFIG_SYS_MONITOR_LEN		(256 * 1024)	/* Reserve 256 kB for Mon */
+#define CONFIG_SYS_MALLOC_LEN		(512 * 1024)	/* Reserved for malloc */
 
 /* Serial Port */
 #define CONFIG_CONS_INDEX     2
 #undef	CONFIG_SERIAL_SOFTWARE_FIFO
-#define CFG_NS16550
-#define CFG_NS16550_SERIAL
-#define CFG_NS16550_REG_SIZE	1
-#define CFG_NS16550_CLK		get_bus_freq(0)
+#define CONFIG_SYS_NS16550
+#define CONFIG_SYS_NS16550_SERIAL
+#define CONFIG_SYS_NS16550_REG_SIZE	1
+#define CONFIG_SYS_NS16550_CLK		get_bus_freq(0)
 
-#define CFG_BAUDRATE_TABLE  \
+#define CONFIG_SYS_BAUDRATE_TABLE  \
 	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 115200}
 
-#define CFG_NS16550_COM1	(CFG_CCSRBAR+0x4500)
-#define CFG_NS16550_COM2	(CFG_CCSRBAR+0x4600)
+#define CONFIG_SYS_NS16550_COM1	(CONFIG_SYS_CCSRBAR+0x4500)
+#define CONFIG_SYS_NS16550_COM2	(CONFIG_SYS_CCSRBAR+0x4600)
 
 #define CONFIG_CMDLINE_EDITING	1	/* add command line history	*/
-#define CFG_HUSH_PARSER		1	/* Use the HUSH parser		*/
-#ifdef	CFG_HUSH_PARSER
-#define CFG_PROMPT_HUSH_PS2 "> "
+#define CONFIG_SYS_HUSH_PARSER		1	/* Use the HUSH parser		*/
+#ifdef	CONFIG_SYS_HUSH_PARSER
+#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
 #endif
 
 /*
@@ -202,40 +200,39 @@
 #define CONFIG_FSL_I2C			/* Use FSL common I2C driver */
 #define  CONFIG_HARD_I2C		/* I2C with hardware support*/
 #undef	CONFIG_SOFT_I2C			/* I2C bit-banged */
-#define CFG_I2C_SPEED		400000	/* I2C speed and slave address	*/
-#define CFG_I2C_SLAVE		0x7F
-#undef CFG_I2C_NOPROBES
-#define CFG_I2C_OFFSET		0x3000
+#define CONFIG_SYS_I2C_SPEED		400000	/* I2C speed and slave address	*/
+#define CONFIG_SYS_I2C_SLAVE		0x7F
+#undef CONFIG_SYS_I2C_NOPROBES
+#define CONFIG_SYS_I2C_OFFSET		0x3000
 
 /* I2C RTC */
 #define CONFIG_RTC_DS1337		/* This is really a DS1339 RTC	*/
-#define CFG_I2C_RTC_ADDR	0x68	/* at address 0x68		*/
+#define CONFIG_SYS_I2C_RTC_ADDR	0x68	/* at address 0x68		*/
 
 /* I2C EEPROM.	AT24C32, we keep our environment in here.
 */
-#define CFG_I2C_EEPROM_ADDR		0x51	/* 1010001x		*/
-#define CFG_I2C_EEPROM_ADDR_LEN		2
-#define CFG_EEPROM_PAGE_WRITE_BITS	5	/* =32 Bytes per write	*/
-#define CFG_EEPROM_PAGE_WRITE_ENABLE
-#define CFG_EEPROM_PAGE_WRITE_DELAY_MS	20
+#define CONFIG_SYS_I2C_EEPROM_ADDR		0x51	/* 1010001x		*/
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN		2
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS	5	/* =32 Bytes per write	*/
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	20
 
 /*
  * Standard 8555 PCI mapping.
  * Addresses are mapped 1-1.
  */
-#define CFG_PCI1_MEM_BASE	0x80000000
-#define CFG_PCI1_MEM_PHYS	CFG_PCI1_MEM_BASE
-#define CFG_PCI1_MEM_SIZE	0x20000000	/* 512M */
-#define CFG_PCI1_IO_BASE	0x00000000
-#define CFG_PCI1_IO_PHYS	0xe2000000
-#define CFG_PCI1_IO_SIZE	0x01000000	/* 16M */
-
-#define CFG_PCI2_MEM_BASE	0xa0000000
-#define CFG_PCI2_MEM_PHYS	CFG_PCI2_MEM_BASE
-#define CFG_PCI2_MEM_SIZE	0x20000000	/* 512M */
-#define CFG_PCI2_IO_BASE	0x00000000
-#define CFG_PCI2_IO_PHYS	0xe3000000
-#define CFG_PCI2_IO_SIZE	0x01000000	/* 16M */
+#define CONFIG_SYS_PCI1_MEM_BASE	0x80000000
+#define CONFIG_SYS_PCI1_MEM_PHYS	CONFIG_SYS_PCI1_MEM_BASE
+#define CONFIG_SYS_PCI1_MEM_SIZE	0x20000000	/* 512M */
+#define CONFIG_SYS_PCI1_IO_BASE	0x00000000
+#define CONFIG_SYS_PCI1_IO_PHYS	0xe2000000
+#define CONFIG_SYS_PCI1_IO_SIZE	0x01000000	/* 16M */
+
+#define CONFIG_SYS_PCI2_MEM_BASE	0xa0000000
+#define CONFIG_SYS_PCI2_MEM_PHYS	CONFIG_SYS_PCI2_MEM_BASE
+#define CONFIG_SYS_PCI2_MEM_SIZE	0x20000000	/* 512M */
+#define CONFIG_SYS_PCI2_IO_BASE	0x00000000
+#define CONFIG_SYS_PCI2_IO_PHYS	0xe3000000
+#define CONFIG_SYS_PCI2_IO_SIZE	0x01000000	/* 16M */
 
 #if defined(CONFIG_PCI)			/* PCI Ethernet card */
 #define CONFIG_MPC85XX_PCI2	1
@@ -252,7 +249,7 @@
 #endif
 
 #define CONFIG_PCI_SCAN_SHOW
-#define CFG_PCI_SUBSYS_VENDORID 0x1057	/* Motorola */
+#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x1057	/* Motorola */
 
 #endif /* CONFIG_PCI */
 
@@ -290,13 +287,13 @@
    * - Select bus for bd/buffers
    * - Full duplex
    */
-  #define CFG_CMXFCR_MASK	(CMXFCR_FC2 | CMXFCR_RF2CS_MSK | CMXFCR_TF2CS_MSK)
-  #define CFG_CMXFCR_VALUE	(CMXFCR_RF2CS_CLK13 | CMXFCR_TF2CS_CLK14)
-  #define CFG_CPMFCR_RAMTYPE	0
+  #define CONFIG_SYS_CMXFCR_MASK	(CMXFCR_FC2 | CMXFCR_RF2CS_MSK | CMXFCR_TF2CS_MSK)
+  #define CONFIG_SYS_CMXFCR_VALUE	(CMXFCR_RF2CS_CLK13 | CMXFCR_TF2CS_CLK14)
+  #define CONFIG_SYS_CPMFCR_RAMTYPE	0
 #if 0
-  #define CFG_FCC_PSMR		(FCC_PSMR_FDE)
+  #define CONFIG_SYS_FCC_PSMR		(FCC_PSMR_FDE)
 #else
-  #define CFG_FCC_PSMR		0
+  #define CONFIG_SYS_FCC_PSMR		0
 #endif
   #define FETH2_RST		0x01
 #elif (CONFIG_ETHER_INDEX == 3)
@@ -313,24 +310,24 @@
 
 /* Environment - default config is in flash, see below */
 #if 0	/* in EEPROM */
-# define CFG_ENV_IS_IN_EEPROM	1
-# define CFG_ENV_OFFSET		0
-# define CFG_ENV_SIZE		2048
+# define CONFIG_ENV_IS_IN_EEPROM	1
+# define CONFIG_ENV_OFFSET		0
+# define CONFIG_ENV_SIZE		2048
 #else	/* in flash */
-# define CFG_ENV_IS_IN_FLASH	1
+# define CONFIG_ENV_IS_IN_FLASH	1
 # ifdef CONFIG_STXSSA_4M
-#  define CFG_ENV_SECT_SIZE	0x20000
+#  define CONFIG_ENV_SECT_SIZE	0x20000
 # else	/* default configuration - 64 MiB flash */
-#  define CFG_ENV_SECT_SIZE	0x40000
+#  define CONFIG_ENV_SECT_SIZE	0x40000
 # endif
-# define CFG_ENV_ADDR		(CFG_MONITOR_BASE - CFG_ENV_SECT_SIZE)
-# define CFG_ENV_SIZE		0x4000
-# define CFG_ENV_ADDR_REDUND	(CFG_ENV_ADDR - CFG_ENV_SECT_SIZE)
-# define CFG_ENV_SIZE_REDUND	(CFG_ENV_SIZE)
+# define CONFIG_ENV_ADDR		(CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
+# define CONFIG_ENV_SIZE		0x4000
+# define CONFIG_ENV_ADDR_REDUND	(CONFIG_ENV_ADDR - CONFIG_ENV_SECT_SIZE)
+# define CONFIG_ENV_SIZE_REDUND	(CONFIG_ENV_SIZE)
 #endif
 
 #define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
-#define CFG_LOADS_BAUD_CHANGE	1	/* allow baudrate change	*/
+#define CONFIG_SYS_LOADS_BAUD_CHANGE	1	/* allow baudrate change	*/
 
 #define	CONFIG_TIMESTAMP		/* Print image info with ts	*/
 
@@ -365,7 +362,7 @@
     #define CONFIG_CMD_MII
 #endif
 
-#if defined(CFG_RAMBOOT)
+#if defined(CONFIG_SYS_RAMBOOT)
     #undef CONFIG_CMD_ENV
     #undef CONFIG_CMD_LOADS
 #else
@@ -378,25 +375,25 @@
 /*
  * Miscellaneous configurable options
  */
-#define CFG_LONGHELP			/* undef to save memory		*/
-#define CFG_PROMPT	"SSA=> "	/* Monitor Command Prompt	*/
+#define CONFIG_SYS_LONGHELP			/* undef to save memory		*/
+#define CONFIG_SYS_PROMPT	"SSA=> "	/* Monitor Command Prompt	*/
 #if defined(CONFIG_CMD_KGDB)
-#define CFG_CBSIZE	1024		/* Console I/O Buffer Size	*/
+#define CONFIG_SYS_CBSIZE	1024		/* Console I/O Buffer Size	*/
 #else
-#define CFG_CBSIZE	256		/* Console I/O Buffer Size	*/
+#define CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size	*/
 #endif
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define CFG_MAXARGS	16		/* max number of command args	*/
-#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size	*/
-#define CFG_LOAD_ADDR	0x1000000	/* default load address */
-#define CFG_HZ		1000		/* decrementer freq: 1 ms ticks */
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS	16		/* max number of command args	*/
+#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
+#define CONFIG_SYS_LOAD_ADDR	0x1000000	/* default load address */
+#define CONFIG_SYS_HZ		1000		/* decrementer freq: 1 ms ticks */
 
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define CFG_BOOTMAPSZ		(8 << 20) /* Initial Memory map for Linux */
+#define CONFIG_SYS_BOOTMAPSZ		(8 << 20) /* Initial Memory map for Linux */
 
 /*
  * Internal Definitions
@@ -426,7 +423,7 @@
  * but only little space is available, so we use a very simple setup.
  * With environment in flash, we use a more powerful default configuration.
  */
-#ifdef CFG_ENV_IS_IN_EEPROM		/* use restricted "standard" environment */
+#ifdef CONFIG_ENV_IS_IN_EEPROM		/* use restricted "standard" environment */
 
 #define CONFIG_BAUDRATE		38400
 
@@ -480,6 +477,6 @@
 	""
 #define CONFIG_BOOTCOMMAND	"run flash_self"
 
-#endif	/* CFG_ENV_IS_IN_EEPROM */
+#endif	/* CONFIG_ENV_IS_IN_EEPROM */
 
 #endif	/* __CONFIG_H */
diff --git a/include/configs/stxxtc.h b/include/configs/stxxtc.h
index 37a52cf7e..bc078cf37 100644
--- a/include/configs/stxxtc.h
+++ b/include/configs/stxxtc.h
@@ -70,7 +70,7 @@
 
 #define CONFIG_AUTOSCRIPT
 #define CONFIG_LOADS_ECHO	0	/* echo off for serial download	*/
-#undef	CFG_LOADS_BAUD_CHANGE		/* don't allow baudrate change	*/
+#undef	CONFIG_SYS_LOADS_BAUD_CHANGE		/* don't allow baudrate change	*/
 
 #undef	CONFIG_WATCHDOG			/* watchdog disabled		*/
 
@@ -95,7 +95,7 @@
 
 #define	CONFIG_NET_MULTI	1	/* the only way to get the FEC in */
 #define	FEC_ENET		1	/* eth.c needs it that way... */
-#undef CFG_DISCOVER_PHY
+#undef CONFIG_SYS_DISCOVER_PHY
 #define CONFIG_MII		1
 #define CONFIG_MII_INIT		1
 #undef CONFIG_RMII
@@ -129,29 +129,29 @@
 /*
  * Miscellaneous configurable options
  */
-#define	CFG_LONGHELP			/* undef to save memory		*/
-#define	CFG_PROMPT	"xtc> "		/* Monitor Command Prompt	*/
+#define	CONFIG_SYS_LONGHELP			/* undef to save memory		*/
+#define	CONFIG_SYS_PROMPT	"xtc> "		/* Monitor Command Prompt	*/
 
-#define CFG_HUSH_PARSER	1
-#define CFG_PROMPT_HUSH_PS2	"> "
+#define CONFIG_SYS_HUSH_PARSER	1
+#define CONFIG_SYS_PROMPT_HUSH_PS2	"> "
 
 #if defined(CONFIG_CMD_KGDB)
-#define	CFG_CBSIZE	1024		/* Console I/O Buffer Size	*/
+#define	CONFIG_SYS_CBSIZE	1024		/* Console I/O Buffer Size	*/
 #else
-#define	CFG_CBSIZE	256		/* Console I/O Buffer Size	*/
+#define	CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size	*/
 #endif
-#define	CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define	CFG_MAXARGS	16		/* max number of command args	*/
-#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+#define	CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define	CONFIG_SYS_MAXARGS	16		/* max number of command args	*/
+#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
 
-#define CFG_MEMTEST_START	0x0300000	/* memtest works on	*/
-#define CFG_MEMTEST_END		0x0700000	/* 3 ... 7 MB in DRAM	*/
+#define CONFIG_SYS_MEMTEST_START	0x0300000	/* memtest works on	*/
+#define CONFIG_SYS_MEMTEST_END		0x0700000	/* 3 ... 7 MB in DRAM	*/
 
-#define	CFG_LOAD_ADDR		0x100000	/* default load address	*/
+#define	CONFIG_SYS_LOAD_ADDR		0x100000	/* default load address	*/
 
-#define	CFG_HZ		1000		/* decrementer freq: 1 ms ticks	*/
+#define	CONFIG_SYS_HZ		1000		/* decrementer freq: 1 ms ticks	*/
 
-#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
 
 /*
  * Low Level Configuration Settings
@@ -161,73 +161,73 @@
 /*-----------------------------------------------------------------------
  * Internal Memory Mapped Register
  */
-#define CFG_IMMR		0xFF000000
+#define CONFIG_SYS_IMMR		0xFF000000
 
 /*-----------------------------------------------------------------------
  * Definitions for initial stack pointer and data area (in DPRAM)
  */
-#define CFG_INIT_RAM_ADDR	CFG_IMMR
-#define	CFG_INIT_RAM_END	0x3000	/* End of used area in DPRAM	*/
-#define	CFG_GBL_DATA_SIZE	64  /* size in bytes reserved for initial data */
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define	CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_IMMR
+#define	CONFIG_SYS_INIT_RAM_END	0x3000	/* End of used area in DPRAM	*/
+#define	CONFIG_SYS_GBL_DATA_SIZE	64  /* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define	CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
 /*-----------------------------------------------------------------------
  * Start addresses for the final memory configuration
  * (Set up by the startup code)
- * Please note that CFG_SDRAM_BASE _must_ start at 0
+ * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
  */
-#define	CFG_SDRAM_BASE		0x00000000
-#define CFG_FLASH_BASE		0x40000000
+#define	CONFIG_SYS_SDRAM_BASE		0x00000000
+#define CONFIG_SYS_FLASH_BASE		0x40000000
 #if defined(DEBUG)
-#define	CFG_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor	*/
+#define	CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor	*/
 #else
-#define	CFG_MONITOR_LEN		(192 << 10)	/* Reserve 192 kB for Monitor	*/
+#define	CONFIG_SYS_MONITOR_LEN		(192 << 10)	/* Reserve 192 kB for Monitor	*/
 #endif
 
 /* yes this is weird, I know :) */
-#define CFG_MONITOR_BASE	(CFG_FLASH_BASE | 0x00F00000)
-#define	CFG_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/
+#define CONFIG_SYS_MONITOR_BASE	(CONFIG_SYS_FLASH_BASE | 0x00F00000)
+#define	CONFIG_SYS_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/
 
-#define CFG_RESET_ADDRESS	0x80000000
+#define CONFIG_SYS_RESET_ADDRESS	0x80000000
 
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define	CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux	*/
+#define	CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux	*/
 
 /*-----------------------------------------------------------------------
  * FLASH organization
  */
-#define	CFG_ENV_IS_IN_FLASH	1
-#define CFG_ENV_SECT_SIZE	0x10000
+#define	CONFIG_ENV_IS_IN_FLASH	1
+#define CONFIG_ENV_SECT_SIZE	0x10000
 
-#define	CFG_ENV_ADDR		(CFG_FLASH_BASE + 0x00000000)
-#define CFG_ENV_OFFSET		0
-#define	CFG_ENV_SIZE		0x4000
+#define	CONFIG_ENV_ADDR		(CONFIG_SYS_FLASH_BASE + 0x00000000)
+#define CONFIG_ENV_OFFSET		0
+#define	CONFIG_ENV_SIZE		0x4000
 
-#define CFG_ENV_ADDR_REDUND	(CFG_FLASH_BASE + 0x00010000)
-#define CFG_ENV_OFFSET_REDUND	0
-#define CFG_ENV_SIZE_REDUND	CFG_ENV_SIZE
+#define CONFIG_ENV_ADDR_REDUND	(CONFIG_SYS_FLASH_BASE + 0x00010000)
+#define CONFIG_ENV_OFFSET_REDUND	0
+#define CONFIG_ENV_SIZE_REDUND	CONFIG_ENV_SIZE
 
-#define CFG_FLASH_CFI		1
+#define CONFIG_SYS_FLASH_CFI		1
 #define CONFIG_FLASH_CFI_DRIVER	1
-#undef CFG_FLASH_USE_BUFFER_WRITE	/* use buffered writes (20x faster) */
-#define CFG_MAX_FLASH_SECT	128	/* max number of sectors on one chip */
-#define CFG_MAX_FLASH_BANKS	2	/* max number of memory banks	*/
+#undef CONFIG_SYS_FLASH_USE_BUFFER_WRITE	/* use buffered writes (20x faster) */
+#define CONFIG_SYS_MAX_FLASH_SECT	128	/* max number of sectors on one chip */
+#define CONFIG_SYS_MAX_FLASH_BANKS	2	/* max number of memory banks	*/
 
-#define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE, CFG_FLASH_BASE + 0x2000000 }
+#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE + 0x2000000 }
 
-#define CFG_FLASH_PROTECTION
+#define CONFIG_SYS_FLASH_PROTECTION
 
 /*-----------------------------------------------------------------------
  * Cache Configuration
  */
-#define CFG_CACHELINE_SIZE	16	/* For all MPC8xx CPUs */
+#define CONFIG_SYS_CACHELINE_SIZE	16	/* For all MPC8xx CPUs */
 #if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT	4	/* log base 2 of the above value */
+#define CONFIG_SYS_CACHELINE_SHIFT	4	/* log base 2 of the above value */
 #endif
 
 /*-----------------------------------------------------------------------
@@ -237,10 +237,10 @@
  * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze
  */
 #if defined(CONFIG_WATCHDOG)
-#define CFG_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
+#define CONFIG_SYS_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
 			 SYPCR_SWE  | SYPCR_SWRI| SYPCR_SWP)
 #else
-#define CFG_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
+#define CONFIG_SYS_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
 #endif
 
 /*-----------------------------------------------------------------------
@@ -248,27 +248,27 @@
  *-----------------------------------------------------------------------
  * PCMCIA config., multi-function pin tri-state
  */
-#define CFG_SIUMCR	(SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_MLRC01 | SIUMCR_FRC | SIUMCR_GB5E)
+#define CONFIG_SYS_SIUMCR	(SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_MLRC01 | SIUMCR_FRC | SIUMCR_GB5E)
 
 /*-----------------------------------------------------------------------
  * TBSCR - Time Base Status and Control				11-26
  *-----------------------------------------------------------------------
  * Clear Reference Interrupt Status, Timebase freezing enabled
  */
-#define CFG_TBSCR	(TBSCR_REFA | TBSCR_REFB | TBSCR_TBF)
+#define CONFIG_SYS_TBSCR	(TBSCR_REFA | TBSCR_REFB | TBSCR_TBF)
 
 /*-----------------------------------------------------------------------
  * RTCSC - Real-Time Clock Status and Control Register		11-27
  *-----------------------------------------------------------------------
  */
-#define CFG_RTCSC	(RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE)
+#define CONFIG_SYS_RTCSC	(RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE)
 
 /*-----------------------------------------------------------------------
  * PISCR - Periodic Interrupt Status and Control		11-31
  *-----------------------------------------------------------------------
  * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
  */
-#define CFG_PISCR	(PISCR_PS | PISCR_PITF)
+#define CONFIG_SYS_PISCR	(PISCR_PS | PISCR_PITF)
 
 /*-----------------------------------------------------------------------
  * PLPRCR - PLL, Low-Power, and Reset Control Register		15-30
@@ -281,11 +281,11 @@
 #if CONFIG_XIN == 10000000
 
 #if MPC8XX_HZ == 50000000
-#define CFG_PLPRCR	((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
+#define CONFIG_SYS_PLPRCR	((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
 			 (1 << PLPRCR_S_SHIFT) | (10 << PLPRCR_MFI_SHIFT) | (0 << PLPRCR_PDF_SHIFT) | \
 			 PLPRCR_TEXPS)
 #elif MPC8XX_HZ == 66666666
-#define CFG_PLPRCR	((1 << PLPRCR_MFN_SHIFT) | (2 << PLPRCR_MFD_SHIFT) | \
+#define CONFIG_SYS_PLPRCR	((1 << PLPRCR_MFN_SHIFT) | (2 << PLPRCR_MFD_SHIFT) | \
 			 (1 << PLPRCR_S_SHIFT) | (13 << PLPRCR_MFI_SHIFT) | (0 << PLPRCR_PDF_SHIFT) | \
 			 PLPRCR_TEXPS)
 #else
@@ -308,12 +308,12 @@
 
 #define SCCR_MASK	SCCR_EBDF11
 #if MPC8XX_HZ > 66666666
-#define CFG_SCCR	(/* SCCR_TBS     | */ SCCR_CRQEN | \
+#define CONFIG_SYS_SCCR	(/* SCCR_TBS     | */ SCCR_CRQEN | \
 			 SCCR_COM00   | SCCR_DFSYNC00 | SCCR_DFBRG00  | \
 			 SCCR_DFNL000 | SCCR_DFNH000  | SCCR_DFLCD000 | \
 			 SCCR_DFALCD00 | SCCR_EBDF01)
 #else
-#define CFG_SCCR	(/* SCCR_TBS     | */ SCCR_CRQEN | \
+#define CONFIG_SYS_SCCR	(/* SCCR_TBS     | */ SCCR_CRQEN | \
 			 SCCR_COM00   | SCCR_DFSYNC00 | SCCR_DFBRG00  | \
 			 SCCR_DFNL000 | SCCR_DFNH000  | SCCR_DFLCD000 | \
 			 SCCR_DFALCD00)
@@ -324,8 +324,8 @@
  *-----------------------------------------------------------------------
  *
  */
-/*#define	CFG_DER	0x2002000F*/
-#define CFG_DER	0
+/*#define	CONFIG_SYS_DER	0x2002000F*/
+#define CONFIG_SYS_DER	0
 
 /*
  * Init Memory Controller:
@@ -343,18 +343,18 @@
 
 #define FLASH_BANK_MAX_SIZE	0x01000000	/* max size per chip */
 
-#define CFG_REMAP_OR_AM		0x80000000
-#define CFG_PRELIM_OR_AM	(0xFFFFFFFFLU & ~(FLASH_BANK_MAX_SIZE - 1))
+#define CONFIG_SYS_REMAP_OR_AM		0x80000000
+#define CONFIG_SYS_PRELIM_OR_AM	(0xFFFFFFFFLU & ~(FLASH_BANK_MAX_SIZE - 1))
 
 /* FLASH timing: ACS = 11, TRLX = 0, CSNT = 1, SCY = 5, EHTR = 1	*/
-#define CFG_OR_TIMING_FLASH	(OR_CSNT_SAM  | OR_BI | OR_SCY_5_CLK | OR_TRLX)
+#define CONFIG_SYS_OR_TIMING_FLASH	(OR_CSNT_SAM  | OR_BI | OR_SCY_5_CLK | OR_TRLX)
 
-#define CFG_OR0_REMAP	(CFG_REMAP_OR_AM  | CFG_OR_TIMING_FLASH)
-#define CFG_OR0_PRELIM	(CFG_PRELIM_OR_AM | CFG_OR_TIMING_FLASH)
-#define CFG_BR0_PRELIM	((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_PS_16 | BR_V )
+#define CONFIG_SYS_OR0_REMAP	(CONFIG_SYS_REMAP_OR_AM  | CONFIG_SYS_OR_TIMING_FLASH)
+#define CONFIG_SYS_OR0_PRELIM	(CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_FLASH)
+#define CONFIG_SYS_BR0_PRELIM	((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_PS_16 | BR_V )
 
-#define CFG_OR1_PRELIM	((0xFFFFFFFFLU & ~(FLASH_BANK_MAX_SIZE - 1)) | CFG_OR_TIMING_FLASH)
-#define CFG_BR1_PRELIM	((FLASH_BASE1_PRELIM & BR_BA_MSK) | BR_PS_16 | BR_V )
+#define CONFIG_SYS_OR1_PRELIM	((0xFFFFFFFFLU & ~(FLASH_BANK_MAX_SIZE - 1)) | CONFIG_SYS_OR_TIMING_FLASH)
+#define CONFIG_SYS_BR1_PRELIM	((FLASH_BASE1_PRELIM & BR_BA_MSK) | BR_PS_16 | BR_V )
 
 /*
  * BR4 and OR4 (SDRAM)
@@ -364,10 +364,10 @@
 #define	SDRAM_MAX_SIZE		(256 << 20)	/* max 256MB per bank	*/
 
 /* SDRAM timing: Multiplexed addresses, GPL5 output to GPL5_A (don't care)	*/
-#define CFG_OR_TIMING_SDRAM	(OR_CSNT_SAM | OR_G5LS)
+#define CONFIG_SYS_OR_TIMING_SDRAM	(OR_CSNT_SAM | OR_G5LS)
 
-#define CFG_OR4_PRELIM	((0xFFFFFFFFLU & ~(SDRAM_MAX_SIZE - 1)) | CFG_OR_TIMING_SDRAM)
-#define CFG_BR4_PRELIM	((SDRAM_BASE1_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_PS_32 | BR_V)
+#define CONFIG_SYS_OR4_PRELIM	((0xFFFFFFFFLU & ~(SDRAM_MAX_SIZE - 1)) | CONFIG_SYS_OR_TIMING_SDRAM)
+#define CONFIG_SYS_BR4_PRELIM	((SDRAM_BASE1_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_PS_32 | BR_V)
 
 /*
  * Memory Periodic Timer Prescaler
@@ -400,34 +400,34 @@
  * 80 Mhz => 80.000.000 / Divider = 156
  */
 
-#define CFG_MAMR_PTA		 234
+#define CONFIG_SYS_MAMR_PTA		 234
 
 /*
  * For 16 MBit, refresh rates could be 31.3 us
  * (= 64 ms / 2K = 125 / quad bursts).
  * For a simpler initialization, 15.6 us is used instead.
  *
- * #define CFG_MPTPR_2BK_2K	MPTPR_PTP_DIV32		for 2 banks
- * #define CFG_MPTPR_1BK_2K	MPTPR_PTP_DIV64		for 1 bank
+ * #define CONFIG_SYS_MPTPR_2BK_2K	MPTPR_PTP_DIV32		for 2 banks
+ * #define CONFIG_SYS_MPTPR_1BK_2K	MPTPR_PTP_DIV64		for 1 bank
  */
-#define CFG_MPTPR_2BK_4K	MPTPR_PTP_DIV16		/* setting for 2 banks	*/
-#define CFG_MPTPR_1BK_4K	MPTPR_PTP_DIV32		/* setting for 1 bank	*/
+#define CONFIG_SYS_MPTPR_2BK_4K	MPTPR_PTP_DIV16		/* setting for 2 banks	*/
+#define CONFIG_SYS_MPTPR_1BK_4K	MPTPR_PTP_DIV32		/* setting for 1 bank	*/
 
 /* refresh rate 7.8 us (= 64 ms / 8K = 31.2 / quad bursts) for 256 MBit		*/
-#define CFG_MPTPR_2BK_8K	MPTPR_PTP_DIV8		/* setting for 2 banks	*/
-#define CFG_MPTPR_1BK_8K	MPTPR_PTP_DIV16		/* setting for 1 bank	*/
+#define CONFIG_SYS_MPTPR_2BK_8K	MPTPR_PTP_DIV8		/* setting for 2 banks	*/
+#define CONFIG_SYS_MPTPR_1BK_8K	MPTPR_PTP_DIV16		/* setting for 1 bank	*/
 
 /*
  * MAMR settings for SDRAM
  */
 
 /* 8 column SDRAM */
-#define CFG_MAMR_8COL	((CFG_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
+#define CONFIG_SYS_MAMR_8COL	((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
 			 MAMR_AMA_TYPE_0 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A11 |	\
 			 MAMR_RLFA_1X	 | MAMR_WLFA_1X	   | MAMR_TLFA_4X)
 
 /* 9 column SDRAM */
-#define CFG_MAMR_9COL	((CFG_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
+#define CONFIG_SYS_MAMR_9COL	((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
 			 MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 |	\
 			 MAMR_RLFA_1X	 | MAMR_WLFA_1X	   | MAMR_TLFA_4X)
 
@@ -450,12 +450,12 @@
 
 /* NAND */
 #define CONFIG_NAND_LEGACY
-#define CFG_NAND_BASE		NAND_BASE
+#define CONFIG_SYS_NAND_BASE		NAND_BASE
 #define CONFIG_MTD_NAND_ECC_JFFS2
 #define CONFIG_MTD_NAND_VERIFY_WRITE
 #define CONFIG_MTD_NAND_UNSAFE
 
-#define CFG_MAX_NAND_DEVICE	1
+#define CONFIG_SYS_MAX_NAND_DEVICE	1
 #undef NAND_NO_RB
 
 #define SECTORSIZE		512
@@ -469,39 +469,39 @@
 /* ALE = PC15, CLE = PB23, CE = PA7, F_RY_BY = PA6 */
 #define NAND_DISABLE_CE(nand) \
 	do { \
-		(((volatile immap_t *)CFG_IMMR)->im_ioport.iop_padat) |=  (1 << (15 - 7)); \
+		(((volatile immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_padat) |=  (1 << (15 - 7)); \
 	} while(0)
 
 #define NAND_ENABLE_CE(nand) \
 	do { \
-		(((volatile immap_t *)CFG_IMMR)->im_ioport.iop_padat) &= ~(1 << (15 - 7)); \
+		(((volatile immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_padat) &= ~(1 << (15 - 7)); \
 	} while(0)
 
 #define NAND_CTL_CLRALE(nandptr) \
 	do { \
-		(((volatile immap_t *)CFG_IMMR)->im_ioport.iop_pcdat) &= ~(1 << (15 - 15)); \
+		(((volatile immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pcdat) &= ~(1 << (15 - 15)); \
 	} while(0)
 
 #define NAND_CTL_SETALE(nandptr) \
 	do { \
-		(((volatile immap_t *)CFG_IMMR)->im_ioport.iop_pcdat) |=  (1 << (15 - 15)); \
+		(((volatile immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pcdat) |=  (1 << (15 - 15)); \
 	} while(0)
 
 #define NAND_CTL_CLRCLE(nandptr) \
 	do { \
-		(((volatile immap_t *)CFG_IMMR)->im_cpm.cp_pbdat) &= ~(1 << (31 - 23)); \
+		(((volatile immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pbdat) &= ~(1 << (31 - 23)); \
 	} while(0)
 
 #define NAND_CTL_SETCLE(nandptr) \
 	do { \
-		(((volatile immap_t *)CFG_IMMR)->im_cpm.cp_pbdat) |=  (1 << (31 - 23)); \
+		(((volatile immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pbdat) |=  (1 << (31 - 23)); \
 	} while(0)
 
 #ifndef NAND_NO_RB
 #define NAND_WAIT_READY(nand) \
 	do { \
 		int _tries = 0; \
-		while ((((volatile immap_t *)CFG_IMMR)->im_ioport.iop_padat & (1 << (15 - 6))) == 0) \
+		while ((((volatile immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_padat & (1 << (15 - 6))) == 0) \
 			if (++_tries > 100000) \
 				break; \
 	} while (0)
@@ -529,8 +529,8 @@
 
 /*****************************************************************************/
 
-#define CFG_DIRECT_FLASH_TFTP
-#define CFG_DIRECT_NAND_TFTP
+#define CONFIG_SYS_DIRECT_FLASH_TFTP
+#define CONFIG_SYS_DIRECT_NAND_TFTP
 
 /*****************************************************************************/
 
@@ -539,7 +539,7 @@
  */
 #define STATUS_LED_BIT		0x00000080		/* bit 24 */
 
-#define STATUS_LED_PERIOD	(CFG_HZ / 2)
+#define STATUS_LED_PERIOD	(CONFIG_SYS_HZ / 2)
 #define STATUS_LED_STATE	STATUS_LED_BLINKING
 
 #define STATUS_LED_ACTIVE	0		/* LED on for bit == 0	*/
@@ -554,15 +554,15 @@ typedef unsigned int led_id_t;
 
 #define __led_toggle(_msk) \
 	do { \
-		((volatile immap_t *)CFG_IMMR)->im_pcmcia.pcmc_pgcrb ^= (_msk); \
+		((volatile immap_t *)CONFIG_SYS_IMMR)->im_pcmcia.pcmc_pgcrb ^= (_msk); \
 	} while(0)
 
 #define __led_set(_msk, _st) \
 	do { \
 		if ((_st)) \
-			((volatile immap_t *)CFG_IMMR)->im_pcmcia.pcmc_pgcrb |= (_msk); \
+			((volatile immap_t *)CONFIG_SYS_IMMR)->im_pcmcia.pcmc_pgcrb |= (_msk); \
 		else \
-			((volatile immap_t *)CFG_IMMR)->im_pcmcia.pcmc_pgcrb &= ~(_msk); \
+			((volatile immap_t *)CONFIG_SYS_IMMR)->im_pcmcia.pcmc_pgcrb &= ~(_msk); \
 	} while(0)
 
 #define __led_init(msk, st) __led_set(msk, st)
@@ -571,16 +571,15 @@ typedef unsigned int led_id_t;
 
 /******************************************************************************/
 
-#define CFG_CONSOLE_IS_IN_ENV		1
-#define CFG_CONSOLE_OVERWRITE_ROUTINE	1
-#define CFG_CONSOLE_ENV_OVERWRITE	1
+#define CONFIG_SYS_CONSOLE_IS_IN_ENV		1
+#define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE	1
+#define CONFIG_SYS_CONSOLE_ENV_OVERWRITE	1
 
 /******************************************************************************/
 
 /* use board specific hardware */
 #undef	CONFIG_WATCHDOG			/* watchdog disabled		*/
 #define CONFIG_HW_WATCHDOG
-#define CONFIG_SHOW_ACTIVITY
 
 /*****************************************************************************/
 
diff --git a/include/configs/suzaku.h b/include/configs/suzaku.h
index 020ed0230..b702de0c5 100644
--- a/include/configs/suzaku.h
+++ b/include/configs/suzaku.h
@@ -36,21 +36,21 @@
 /*-----------------------------------------------------------------------
  * Start addresses for the final memory configuration
  * (Set up by the startup code)
- * Please note that CFG_SDRAM_BASE _must_ start at 0
+ * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
  */
-#define CFG_SDRAM_BASE		0x80000000
-#define CFG_SDRAM_SIZE		0x01000000
-#define CFG_FLASH_BASE		0xfff00000
-#define CFG_FLASH_SIZE		0x00400000
-#define CFG_RESET_ADDRESS	0xfff00100
-#define CFG_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor */
-#define CFG_MONITOR_BASE	(CFG_SDRAM_BASE + CFG_SDRAM_SIZE - (1024 * 1024))
-#define CFG_MALLOC_LEN		(256 << 10)	/* Reserve 256 kB for malloc */
-#define CFG_MALLOC_BASE		(CFG_MONITOR_BASE - (1024 * 1024))
+#define CONFIG_SYS_SDRAM_BASE		0x80000000
+#define CONFIG_SYS_SDRAM_SIZE		0x01000000
+#define CONFIG_SYS_FLASH_BASE		0xfff00000
+#define CONFIG_SYS_FLASH_SIZE		0x00400000
+#define CONFIG_SYS_RESET_ADDRESS	0xfff00100
+#define CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor */
+#define CONFIG_SYS_MONITOR_BASE	(CONFIG_SYS_SDRAM_BASE + CONFIG_SYS_SDRAM_SIZE - (1024 * 1024))
+#define CONFIG_SYS_MALLOC_LEN		(256 << 10)	/* Reserve 256 kB for malloc */
+#define CONFIG_SYS_MALLOC_BASE		(CONFIG_SYS_MONITOR_BASE - (1024 * 1024))
 
 #define CONFIG_XILINX_UARTLITE
 #define CONFIG_BAUDRATE		115200
-#define CFG_BAUDRATE_TABLE	{ 115200 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 115200 }
 
 /* System Register (GPIO) */
 #define MICROBLAZE_SYSREG_BASE_ADDR 0xFFFFA000
@@ -67,42 +67,42 @@
 #undef CONFIG_CMD_NET
 #undef CONFIG_CMD_MISC
 
-#define CFG_UART1_BASE		(0xFFFF2000)
-#define CONFIG_SERIAL_BASE	CFG_UART1_BASE
+#define CONFIG_SYS_UART1_BASE		(0xFFFF2000)
+#define CONFIG_SERIAL_BASE	CONFIG_SYS_UART1_BASE
 
 /*
  * Miscellaneous configurable options
  */
-#define	CFG_LONGHELP				/* undef to save memory		*/
-#define CFG_PROMPT		"SUZAKU> "	/* Monitor Command Prompt	*/
-#define CFG_CBSIZE		256
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size	*/
-#define CFG_MAXARGS		16		/* max number of command args	*/
+#define	CONFIG_SYS_LONGHELP				/* undef to save memory		*/
+#define CONFIG_SYS_PROMPT		"SUZAKU> "	/* Monitor Command Prompt	*/
+#define CONFIG_SYS_CBSIZE		256
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size	*/
+#define CONFIG_SYS_MAXARGS		16		/* max number of command args	*/
 
-#define CFG_LOAD_ADDR		CFG_SDRAM_BASE	/* default load address		*/
+#define CONFIG_SYS_LOAD_ADDR		CONFIG_SYS_SDRAM_BASE	/* default load address		*/
 
 /*-----------------------------------------------------------------------
  * FLASH organization
  */
-#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
-#define CFG_MAX_FLASH_SECT	1	/* max number of sectors on one chip	*/
+#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
+#define CONFIG_SYS_MAX_FLASH_SECT	1	/* max number of sectors on one chip	*/
 
 /*-----------------------------------------------------------------------
  * NVRAM organization
  */
-#define CFG_ENV_IS_NOWHERE	1
-#define	CFG_ENV_SIZE		0x10000	/* Total Size of Environment Sector	*/
-#define CFG_ENV_SECT_SIZE	0x10000	/* see README - env sector total size	*/
+#define CONFIG_ENV_IS_NOWHERE	1
+#define	CONFIG_ENV_SIZE		0x10000	/* Total Size of Environment Sector	*/
+#define CONFIG_ENV_SECT_SIZE	0x10000	/* see README - env sector total size	*/
 
 /*-----------------------------------------------------------------------
  * Definitions for initial stack pointer and data area (in DPRAM)
  */
 
-#define CFG_INIT_RAM_ADDR	0x80000000	/* inside of SDRAM */
-#define CFG_INIT_RAM_END	0x2000		/* End of used area in RAM */
-#define CFG_GBL_DATA_SIZE	128		/* size in bytes reserved for initial data */
-#define CFG_GBL_DATA_OFFSET    (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_INIT_RAM_ADDR	0x80000000	/* inside of SDRAM */
+#define CONFIG_SYS_INIT_RAM_END	0x2000		/* End of used area in RAM */
+#define CONFIG_SYS_GBL_DATA_SIZE	128		/* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET    (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
 #define XILINX_CLOCK_FREQ	50000000
 #define CONFIG_XILINX_CLOCK_FREQ	XILINX_CLOCK_FREQ
diff --git a/include/configs/svm_sc8xx.h b/include/configs/svm_sc8xx.h
index bbbfa15db..3917a1bdd 100644
--- a/include/configs/svm_sc8xx.h
+++ b/include/configs/svm_sc8xx.h
@@ -54,7 +54,7 @@
 /* #define CONFIG_SDRAM_16M */
 #define CONFIG_SDRAM_32M
 /* #define CONFIG_SDRAM_64M */
-#define CFG_RESET_ADDRESS 0xffffffff
+#define CONFIG_SYS_RESET_ADDRESS 0xffffffff
 /*
  * High Level Configuration Options
  * (easy to change)
@@ -114,7 +114,7 @@
 	"tftpboot 0x210000 pImage-sc855t;bootm 0x210000"
 
 #define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
-#undef	CFG_LOADS_BAUD_CHANGE		/* don't allow baudrate change	*/
+#undef	CONFIG_SYS_LOADS_BAUD_CHANGE		/* don't allow baudrate change	*/
 
 
 #ifdef CONFIG_LCD
@@ -156,30 +156,30 @@
 /*
  * Miscellaneous configurable options
  */
-#define	CFG_LONGHELP			/* undef to save memory		*/
-#define	CFG_PROMPT	"=> "		/* Monitor Command Prompt	*/
+#define	CONFIG_SYS_LONGHELP			/* undef to save memory		*/
+#define	CONFIG_SYS_PROMPT	"=> "		/* Monitor Command Prompt	*/
 
-#ifdef  CFG_HUSH_PARSER
-#define CFG_PROMPT_HUSH_PS2     "> "
+#ifdef  CONFIG_SYS_HUSH_PARSER
+#define CONFIG_SYS_PROMPT_HUSH_PS2     "> "
 #endif
 
 #if defined(CONFIG_CMD_KGDB)
-#define	CFG_CBSIZE	1024		/* Console I/O Buffer Size	*/
+#define	CONFIG_SYS_CBSIZE	1024		/* Console I/O Buffer Size	*/
 #else
-#define	CFG_CBSIZE	256		/* Console I/O Buffer Size	*/
+#define	CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size	*/
 #endif
-#define	CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define	CFG_MAXARGS	16		/* max number of command args	*/
-#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+#define	CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define	CONFIG_SYS_MAXARGS	16		/* max number of command args	*/
+#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
 
-#define CFG_MEMTEST_START	0x0400000	/* memtest works on	*/
-#define CFG_MEMTEST_END		0x0C00000	/* 4 ... 12 MB in DRAM	*/
+#define CONFIG_SYS_MEMTEST_START	0x0400000	/* memtest works on	*/
+#define CONFIG_SYS_MEMTEST_END		0x0C00000	/* 4 ... 12 MB in DRAM	*/
 
-#define	CFG_LOAD_ADDR		0x100000	/* default load address	*/
+#define	CONFIG_SYS_LOAD_ADDR		0x100000	/* default load address	*/
 
-#define	CFG_HZ		1000		/* decrementer freq: 1 ms ticks	*/
+#define	CONFIG_SYS_HZ		1000		/* decrementer freq: 1 ms ticks	*/
 
-#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
 
 /*
  * Low Level Configuration Settings
@@ -189,75 +189,75 @@
 /*-----------------------------------------------------------------------
  * Internal Memory Mapped Register
  */
-#define CFG_IMMR		0xFF000000
+#define CONFIG_SYS_IMMR		0xFF000000
 
 /*-----------------------------------------------------------------------
  * Definitions for initial stack pointer and data area (in DPRAM)
  */
-#define CFG_INIT_RAM_ADDR	CFG_IMMR
-#define	CFG_INIT_RAM_END	0x2F00	/* End of used area in DPRAM	*/
-#define	CFG_GBL_DATA_SIZE	64  /* size in bytes reserved for initial data */
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define	CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_IMMR
+#define	CONFIG_SYS_INIT_RAM_END	0x2F00	/* End of used area in DPRAM	*/
+#define	CONFIG_SYS_GBL_DATA_SIZE	64  /* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define	CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
 /*-----------------------------------------------------------------------
  * Start addresses for the final memory configuration
  * (Set up by the startup code)
- * Please note that CFG_SDRAM_BASE _must_ start at 0
+ * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
  */
-#define	CFG_SDRAM_BASE		0x00000000
-#define CFG_FLASH_BASE		0x40000000
-#define	CFG_MONITOR_LEN		(384 << 10)	/* Reserve 192 kB for Monitor	*/
-#define CFG_MONITOR_BASE	CFG_FLASH_BASE
-#define	CFG_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/
+#define	CONFIG_SYS_SDRAM_BASE		0x00000000
+#define CONFIG_SYS_FLASH_BASE		0x40000000
+#define	CONFIG_SYS_MONITOR_LEN		(384 << 10)	/* Reserve 192 kB for Monitor	*/
+#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_FLASH_BASE
+#define	CONFIG_SYS_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/
 
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define	CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux	*/
+#define	CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux	*/
 
 /*-----------------------------------------------------------------------
  * FLASH organization
  */
-#define CFG_MAX_FLASH_BANKS	2	/* max number of memory banks		*/
-#define CFG_MAX_FLASH_SECT	67	/* max number of sectors on one chip	*/
+#define CONFIG_SYS_MAX_FLASH_BANKS	2	/* max number of memory banks		*/
+#define CONFIG_SYS_MAX_FLASH_SECT	67	/* max number of sectors on one chip	*/
 
-#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
-#define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
+#define CONFIG_SYS_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
+#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
 
-#define	CFG_ENV_IS_IN_FLASH	1
+#define	CONFIG_ENV_IS_IN_FLASH	1
 
 #ifdef CONFIG_BOOT_8B
-#define	CFG_ENV_OFFSET		0x10000	/*   Offset   of Environment Sector	*/
-#define	CFG_ENV_SIZE		0x10000	/* Total Size of Environment Sector	*/
+#define	CONFIG_ENV_OFFSET		0x10000	/*   Offset   of Environment Sector	*/
+#define	CONFIG_ENV_SIZE		0x10000	/* Total Size of Environment Sector	*/
 #elif defined (CONFIG_BOOT_16B)
-#define	CFG_ENV_OFFSET		0x10000	/*   Offset   of Environment Sector	*/
-#define	CFG_ENV_SIZE		0x10000	/* Total Size of Environment Sector	*/
+#define	CONFIG_ENV_OFFSET		0x10000	/*   Offset   of Environment Sector	*/
+#define	CONFIG_ENV_SIZE		0x10000	/* Total Size of Environment Sector	*/
 #elif defined (CONFIG_BOOT_32B)
-#define	CFG_ENV_OFFSET		0x8000	/*   Offset   of Environment Sector	*/
-#define	CFG_ENV_SIZE		0x4000	/* Total Size of Environment Sector	*/
+#define	CONFIG_ENV_OFFSET		0x8000	/*   Offset   of Environment Sector	*/
+#define	CONFIG_ENV_SIZE		0x4000	/* Total Size of Environment Sector	*/
 #endif
 
 /* Address and size of Redundant Environment Sector     */
-#define CFG_ENV_OFFSET_REDUND   (CFG_ENV_OFFSET+CFG_ENV_SIZE)
-#define CFG_ENV_SIZE_REDUND     (CFG_ENV_SIZE)
+#define CONFIG_ENV_OFFSET_REDUND   (CONFIG_ENV_OFFSET+CONFIG_ENV_SIZE)
+#define CONFIG_ENV_SIZE_REDUND     (CONFIG_ENV_SIZE)
 
 
 /*-----------------------------------------------------------------------
  * Hardware Information Block
  */
-#define CFG_HWINFO_OFFSET	0x0003FFC0	/* offset of HW Info block */
-#define CFG_HWINFO_SIZE		0x00000040	/* size   of HW Info block */
-#define CFG_HWINFO_MAGIC	0x46454C38	/* 'SVM8' */
+#define CONFIG_SYS_HWINFO_OFFSET	0x0003FFC0	/* offset of HW Info block */
+#define CONFIG_SYS_HWINFO_SIZE		0x00000040	/* size   of HW Info block */
+#define CONFIG_SYS_HWINFO_MAGIC	0x46454C38	/* 'SVM8' */
 
 /*-----------------------------------------------------------------------
  * Cache Configuration
  */
-#define CFG_CACHELINE_SIZE	16	/* For all MPC8xx CPUs			*/
+#define CONFIG_SYS_CACHELINE_SIZE	16	/* For all MPC8xx CPUs			*/
 #if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT	4	/* log base 2 of the above value	*/
+#define CONFIG_SYS_CACHELINE_SHIFT	4	/* log base 2 of the above value	*/
 #endif
 
 /*-----------------------------------------------------------------------
@@ -267,13 +267,13 @@
  * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze
  */
 #if defined(CONFIG_WATCHDOG)
-/*#define CFG_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
+/*#define CONFIG_SYS_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
 			 SYPCR_SWE  | SYPCR_SWRI| SYPCR_SWP)
 */
-#define CFG_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_SWF | \
+#define CONFIG_SYS_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_SWF | \
 			 SYPCR_SWE  | SYPCR_SWRI| SYPCR_SWP)
 #else
-#define CFG_SYPCR 0xffffff88
+#define CONFIG_SYS_SYPCR 0xffffff88
 #endif
 
 /*-----------------------------------------------------------------------
@@ -282,10 +282,10 @@
  * PCMCIA config., multi-function pin tri-state
  */
 #ifndef	CONFIG_CAN_DRIVER
-/*#define CFG_SIUMCR 0x00610c00	*/
-#define CFG_SIUMCR 0x00000000
+/*#define CONFIG_SYS_SIUMCR 0x00610c00	*/
+#define CONFIG_SYS_SIUMCR 0x00000000
 #else	/* we must activate GPL5 in the SIUMCR for CAN */
-#define CFG_SIUMCR	(SIUMCR_DBGC11 | SIUMCR_DBPC00 | SIUMCR_MLRC01)
+#define CONFIG_SYS_SIUMCR	(SIUMCR_DBGC11 | SIUMCR_DBPC00 | SIUMCR_MLRC01)
 #endif	/* CONFIG_CAN_DRIVER */
 
 /*-----------------------------------------------------------------------
@@ -293,20 +293,20 @@
  *-----------------------------------------------------------------------
  * Clear Reference Interrupt Status, Timebase freezing enabled
  */
-#define CFG_TBSCR	0x0001
+#define CONFIG_SYS_TBSCR	0x0001
 
 /*-----------------------------------------------------------------------
  * RTCSC - Real-Time Clock Status and Control Register		11-27
  *-----------------------------------------------------------------------
  */
-#define CFG_RTCSC	0x00c3
+#define CONFIG_SYS_RTCSC	0x00c3
 
 /*-----------------------------------------------------------------------
  * PISCR - Periodic Interrupt Status and Control		11-31
  *-----------------------------------------------------------------------
  * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
  */
-#define CFG_PISCR	0x0000
+#define CONFIG_SYS_PISCR	0x0000
 
 /*-----------------------------------------------------------------------
  * PLPRCR - PLL, Low-Power, and Reset Control Register		15-30
@@ -315,19 +315,19 @@
  * interrupt status bit
  */
 #if defined (CONFIG_100MHz)
-#define CFG_PLPRCR 0x06301000
+#define CONFIG_SYS_PLPRCR 0x06301000
 #define CONFIG_8xx_GCLK_FREQ 100000000
 #elif defined (CONFIG_80MHz)
-#define CFG_PLPRCR 0x04f01000
+#define CONFIG_SYS_PLPRCR 0x04f01000
 #define CONFIG_8xx_GCLK_FREQ 80000000
 #elif defined(CONFIG_75MHz)
-#define CFG_PLPRCR 0x04a00100
+#define CONFIG_SYS_PLPRCR 0x04a00100
 #define CONFIG_8xx_GCLK_FREQ 75000000
 #elif defined(CONFIG_66MHz)
-#define CFG_PLPRCR 0x04101000
+#define CONFIG_SYS_PLPRCR 0x04101000
 #define CONFIG_8xx_GCLK_FREQ 66000000
 #elif defined(CONFIG_50MHz)
-#define CFG_PLPRCR 0x03101000
+#define CONFIG_SYS_PLPRCR 0x03101000
 #define CONFIG_8xx_GCLK_FREQ 50000000
 #endif
 
@@ -339,9 +339,9 @@
  */
 #define SCCR_MASK	SCCR_EBDF11
 #ifdef	CONFIG_BUS_DIV2
-#define CFG_SCCR	0x02020000 | SCCR_RTSEL
+#define CONFIG_SYS_SCCR	0x02020000 | SCCR_RTSEL
 #else			/* up to 50 MHz we use a 1:1 clock */
-#define CFG_SCCR    0x02000000 | SCCR_RTSEL
+#define CONFIG_SYS_SCCR    0x02000000 | SCCR_RTSEL
 #endif
 
 /*-----------------------------------------------------------------------
@@ -349,14 +349,14 @@
  *-----------------------------------------------------------------------
  *
  */
-#define CFG_PCMCIA_MEM_ADDR	(0xE0000000)
-#define CFG_PCMCIA_MEM_SIZE	( 64 << 20 )
-#define CFG_PCMCIA_DMA_ADDR	(0xE4000000)
-#define CFG_PCMCIA_DMA_SIZE	( 64 << 20 )
-#define CFG_PCMCIA_ATTRB_ADDR	(0xE8000000)
-#define CFG_PCMCIA_ATTRB_SIZE	( 64 << 20 )
-#define CFG_PCMCIA_IO_ADDR	(0xEC000000)
-#define CFG_PCMCIA_IO_SIZE	( 64 << 20 )
+#define CONFIG_SYS_PCMCIA_MEM_ADDR	(0xE0000000)
+#define CONFIG_SYS_PCMCIA_MEM_SIZE	( 64 << 20 )
+#define CONFIG_SYS_PCMCIA_DMA_ADDR	(0xE4000000)
+#define CONFIG_SYS_PCMCIA_DMA_SIZE	( 64 << 20 )
+#define CONFIG_SYS_PCMCIA_ATTRB_ADDR	(0xE8000000)
+#define CONFIG_SYS_PCMCIA_ATTRB_SIZE	( 64 << 20 )
+#define CONFIG_SYS_PCMCIA_IO_ADDR	(0xEC000000)
+#define CONFIG_SYS_PCMCIA_IO_SIZE	( 64 << 20 )
 
 /*-----------------------------------------------------------------------
  * IDE/ATA stuff (Supports IDE harddisk on PCMCIA Adapter)
@@ -369,28 +369,28 @@
 #undef	CONFIG_IDE_LED			/* LED   for ide not supported	*/
 #undef	CONFIG_IDE_RESET		/* reset for ide not supported	*/
 
-#define CFG_IDE_MAXBUS		1	/* max. 1 IDE bus		*/
-#define CFG_IDE_MAXDEVICE	1	/* max. 1 drive per IDE bus	*/
+#define CONFIG_SYS_IDE_MAXBUS		1	/* max. 1 IDE bus		*/
+#define CONFIG_SYS_IDE_MAXDEVICE	1	/* max. 1 drive per IDE bus	*/
 
-#define CFG_ATA_BASE_ADDR       0xFE100010
-#define CFG_ATA_IDE0_OFFSET     0x0000
-/*#define CFG_ATA_IDE1_OFFSET     0x0C00 */
-#define CFG_ATA_DATA_OFFSET     0x0000  /* Offset for data I/O
+#define CONFIG_SYS_ATA_BASE_ADDR       0xFE100010
+#define CONFIG_SYS_ATA_IDE0_OFFSET     0x0000
+/*#define CONFIG_SYS_ATA_IDE1_OFFSET     0x0C00 */
+#define CONFIG_SYS_ATA_DATA_OFFSET     0x0000  /* Offset for data I/O
 					   */
-#define CFG_ATA_REG_OFFSET      0x0200  /* Offset for normal register accesses
+#define CONFIG_SYS_ATA_REG_OFFSET      0x0200  /* Offset for normal register accesses
 					   */
-#define CFG_ATA_ALT_OFFSET      0x0210  /* Offset for alternate registers
+#define CONFIG_SYS_ATA_ALT_OFFSET      0x0210  /* Offset for alternate registers
 					   */
 #define CONFIG_ATAPI
-#define CFG_PIO_MODE 0
+#define CONFIG_SYS_PIO_MODE 0
 
 /*-----------------------------------------------------------------------
  *
  *-----------------------------------------------------------------------
  *
  */
-/*#define	CFG_DER	0x2002000F*/
-#define CFG_DER	0x0
+/*#define	CONFIG_SYS_DER	0x2002000F*/
+#define CONFIG_SYS_DER	0x0
 
 /*
  * Init Memory Controller:
@@ -405,55 +405,55 @@
  * restrict access enough to keep SRAM working (if any)
  * but not too much to meddle with FLASH accesses
  */
-#define CFG_REMAP_OR_AM		0x80000000	/* OR addr mask */
-#define CFG_PRELIM_OR_AM	0xE0000000	/* OR addr mask */
+#define CONFIG_SYS_REMAP_OR_AM		0x80000000	/* OR addr mask */
+#define CONFIG_SYS_PRELIM_OR_AM	0xE0000000	/* OR addr mask */
 
 /*
  * FLASH timing:
  */
 #if defined(CONFIG_100MHz)
-#define CFG_OR_TIMING_FLASH 0x000002f4
-#define CFG_OR_TIMING_DOC   0x000002f4
-#define CFG_MxMR_PTx 0x61000000
-#define CFG_MPTPR 0x400
+#define CONFIG_SYS_OR_TIMING_FLASH 0x000002f4
+#define CONFIG_SYS_OR_TIMING_DOC   0x000002f4
+#define CONFIG_SYS_MxMR_PTx 0x61000000
+#define CONFIG_SYS_MPTPR 0x400
 
 #elif  defined(CONFIG_80MHz)
-#define CFG_OR_TIMING_FLASH 0x00000ff4
-#define CFG_OR_TIMING_DOC   0x000001f4
-#define CFG_MxMR_PTx 0x4e000000
-#define CFG_MPTPR 0x400
+#define CONFIG_SYS_OR_TIMING_FLASH 0x00000ff4
+#define CONFIG_SYS_OR_TIMING_DOC   0x000001f4
+#define CONFIG_SYS_MxMR_PTx 0x4e000000
+#define CONFIG_SYS_MPTPR 0x400
 
 #elif defined(CONFIG_75MHz)
-#define CFG_OR_TIMING_FLASH 0x000008f4
-#define CFG_OR_TIMING_DOC   0x000002f4
-#define CFG_MxMR_PTx 0x49000000
-#define CFG_MPTPR 0x400
+#define CONFIG_SYS_OR_TIMING_FLASH 0x000008f4
+#define CONFIG_SYS_OR_TIMING_DOC   0x000002f4
+#define CONFIG_SYS_MxMR_PTx 0x49000000
+#define CONFIG_SYS_MPTPR 0x400
 
 #elif defined(CONFIG_66MHz)
-#define CFG_OR_TIMING_FLASH     (OR_ACS_DIV1  | OR_TRLX | OR_CSNT_SAM | \
+#define CONFIG_SYS_OR_TIMING_FLASH     (OR_ACS_DIV1  | OR_TRLX | OR_CSNT_SAM | \
 	OR_SCY_3_CLK | OR_EHTR | OR_BI)
-/*#define CFG_OR_TIMING_FLASH 0x000001f4 */
-#define CFG_OR_TIMING_DOC   0x000003f4
-#define CFG_MxMR_PTx  0x40000000
-#define CFG_MPTPR 0x400
+/*#define CONFIG_SYS_OR_TIMING_FLASH 0x000001f4 */
+#define CONFIG_SYS_OR_TIMING_DOC   0x000003f4
+#define CONFIG_SYS_MxMR_PTx  0x40000000
+#define CONFIG_SYS_MPTPR 0x400
 
 #else		/*   50 MHz */
-#define CFG_OR_TIMING_FLASH 0x00000ff4
-#define CFG_OR_TIMING_DOC   0x000001f4
-#define CFG_MxMR_PTx  0x30000000
-#define CFG_MPTPR 0x400
+#define CONFIG_SYS_OR_TIMING_FLASH 0x00000ff4
+#define CONFIG_SYS_OR_TIMING_DOC   0x000001f4
+#define CONFIG_SYS_MxMR_PTx  0x30000000
+#define CONFIG_SYS_MPTPR 0x400
 #endif	/*CONFIG_??MHz */
 
 
 #if  defined (CONFIG_BOOT_8B)   /* 512K X 8 ,29F040 , 2MB space */
-#define CFG_OR0_PRELIM	(0xffe00000 | CFG_OR_TIMING_FLASH)
-#define CFG_BR0_PRELIM	((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_V | BR_PS_8)
+#define CONFIG_SYS_OR0_PRELIM	(0xffe00000 | CONFIG_SYS_OR_TIMING_FLASH)
+#define CONFIG_SYS_BR0_PRELIM	((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_V | BR_PS_8)
 #elif  defined (CONFIG_BOOT_16B)   /* 29lv160 X 16 , 4MB space */
-#define CFG_OR0_PRELIM	(0xffc00000 | CFG_OR_TIMING_FLASH)
-#define CFG_BR0_PRELIM	((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_V | BR_PS_16)
+#define CONFIG_SYS_OR0_PRELIM	(0xffc00000 | CONFIG_SYS_OR_TIMING_FLASH)
+#define CONFIG_SYS_BR0_PRELIM	((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_V | BR_PS_16)
 #elif defined( CONFIG_BOOT_32B )  /* 29lv160 X 2 X 32, 4/8/16MB , 64MB space */
-#define CFG_OR0_PRELIM	(0xfc000000 | CFG_OR_TIMING_FLASH)
-#define CFG_BR0_PRELIM	((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_V )
+#define CONFIG_SYS_OR0_PRELIM	(0xfc000000 | CONFIG_SYS_OR_TIMING_FLASH)
+#define CONFIG_SYS_BR0_PRELIM	((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_V )
 #else
 #error Boot device port size missing.
 #endif
@@ -462,12 +462,12 @@
  * Disk-On-Chip configuration
  */
 
-#define CFG_DOC_SHORT_TIMEOUT
-#define CFG_MAX_DOC_DEVICE      1       /* Max number of DOC devices    */
+#define CONFIG_SYS_DOC_SHORT_TIMEOUT
+#define CONFIG_SYS_MAX_DOC_DEVICE      1       /* Max number of DOC devices    */
 
-#define CFG_DOC_SUPPORT_2000
-#define CFG_DOC_SUPPORT_MILLENNIUM
-#define CFG_DOC_BASE 0x80000000
+#define CONFIG_SYS_DOC_SUPPORT_2000
+#define CONFIG_SYS_DOC_SUPPORT_MILLENNIUM
+#define CONFIG_SYS_DOC_BASE 0x80000000
 
 
 /*
diff --git a/include/configs/taihu.h b/include/configs/taihu.h
index 86f776df2..8c48c669d 100644
--- a/include/configs/taihu.h
+++ b/include/configs/taihu.h
@@ -74,7 +74,7 @@
 #endif
 /*----------------------------------------------------------------------------*/
 
-#define CFG_ENV_IS_IN_FLASH     1	/* use FLASH for environment vars */
+#define CONFIG_ENV_IS_IN_FLASH     1	/* use FLASH for environment vars */
 
 /*
  * Default environment variables
@@ -102,8 +102,8 @@
 #define CONFIG_CMD_SPI
 
 #undef CONFIG_SPD_EEPROM		/* use SPD EEPROM for setup */
-#define CFG_SDRAM_SIZE_PER_BANK 0x04000000 /* 64MB */
-#define CFG_SDRAM_BANKS	        2
+#define CONFIG_SYS_SDRAM_SIZE_PER_BANK 0x04000000 /* 64MB */
+#define CONFIG_SYS_SDRAM_BANKS	        2
 
 /*
  * SDRAM configuration (please see cpu/ppc/sdram.[ch])
@@ -112,38 +112,38 @@
 #define CONFIG_SDRAM_BANK1	1	/* init onboard SDRAM bank 1 */
 
 /* SDRAM timings used in datasheet */
-#define CFG_SDRAM_CL            3	/* CAS latency */
-#define CFG_SDRAM_tRP           20	/* PRECHARGE command period */
-#define CFG_SDRAM_tRC           66	/* ACTIVE-to-ACTIVE command period */
-#define CFG_SDRAM_tRCD          20	/* ACTIVE-to-READ delay */
-#define CFG_SDRAM_tRFC		66	/* Auto refresh period */
+#define CONFIG_SYS_SDRAM_CL            3	/* CAS latency */
+#define CONFIG_SYS_SDRAM_tRP           20	/* PRECHARGE command period */
+#define CONFIG_SYS_SDRAM_tRC           66	/* ACTIVE-to-ACTIVE command period */
+#define CONFIG_SYS_SDRAM_tRCD          20	/* ACTIVE-to-READ delay */
+#define CONFIG_SYS_SDRAM_tRFC		66	/* Auto refresh period */
 
 /*
- * If CFG_EXT_SERIAL_CLOCK, then the UART divisor is 1.
- * If CFG_405_UART_ERRATA_59, then UART divisor is 31.
- * Otherwise, UART divisor is determined by CPU Clock and CFG_BASE_BAUD value.
+ * If CONFIG_SYS_EXT_SERIAL_CLOCK, then the UART divisor is 1.
+ * If CONFIG_SYS_405_UART_ERRATA_59, then UART divisor is 31.
+ * Otherwise, UART divisor is determined by CPU Clock and CONFIG_SYS_BASE_BAUD value.
  * The Linux BASE_BAUD define should match this configuration.
  *    baseBaud = cpuClock/(uartDivisor*16)
- * If CFG_405_UART_ERRATA_59 and 200MHz CPU clock,
+ * If CONFIG_SYS_405_UART_ERRATA_59 and 200MHz CPU clock,
  * set Linux BASE_BAUD to 403200.
  */
 #undef	CONFIG_SERIAL_SOFTWARE_FIFO
-#undef  CFG_EXT_SERIAL_CLOCK           /* external serial clock */
-#undef  CFG_405_UART_ERRATA_59         /* 405GP/CR Rev. D silicon */
-#define CFG_BASE_BAUD		691200
+#undef  CONFIG_SYS_EXT_SERIAL_CLOCK           /* external serial clock */
+#undef  CONFIG_SYS_405_UART_ERRATA_59         /* 405GP/CR Rev. D silicon */
+#define CONFIG_SYS_BASE_BAUD		691200
 #define CONFIG_UART1_CONSOLE	1
 
 /*-----------------------------------------------------------------------
  * I2C stuff
  *-----------------------------------------------------------------------
  */
-#define CFG_I2C_SPEED		400000	/* I2C speed and slave address	*/
+#define CONFIG_SYS_I2C_SPEED		400000	/* I2C speed and slave address	*/
 
-#define CFG_I2C_NOPROBES	{ 0x69 } /* avoid iprobe hangup (why?) */
-#define CFG_EEPROM_PAGE_WRITE_DELAY_MS	6 /* 24C02 requires 5ms delay */
+#define CONFIG_SYS_I2C_NOPROBES	{ 0x69 } /* avoid iprobe hangup (why?) */
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	6 /* 24C02 requires 5ms delay */
 
-#define CFG_I2C_EEPROM_ADDR	0x50	/* I2C boot EEPROM (24C02W)	*/
-#define CFG_I2C_EEPROM_ADDR_LEN	1	/* Bytes of address		*/
+#define CONFIG_SYS_I2C_EEPROM_ADDR	0x50	/* I2C boot EEPROM (24C02W)	*/
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN	1	/* Bytes of address		*/
 
 #define CONFIG_SOFT_SPI
 #define SPI_SCL  spi_scl
@@ -159,7 +159,7 @@ unsigned char spi_read(void);
 /* standard dtt sensor configuration */
 #define CONFIG_DTT_DS1775	1
 #define CONFIG_DTT_SENSORS	{ 0 }
-#define CFG_I2C_DTT_ADDR	0x49
+#define CONFIG_SYS_I2C_DTT_ADDR	0x49
 
 /*-----------------------------------------------------------------------
  * PCI stuff
@@ -175,62 +175,62 @@ unsigned char spi_read(void);
 					/* resource configuration      */
 #define CONFIG_PCI_SCAN_SHOW            /* show pci devices on startup */
 
-#define CFG_PCI_SUBSYS_VENDORID 0x10e8	/* AMCC */
-#define CFG_PCI_SUBSYS_DEVICEID 0xcafe	/* Whatever */
-#define CFG_PCI_CLASSCODE       0x0600  /* PCI Class Code: bridge/host */
-#define CFG_PCI_PTM1LA	    0x00000000	/* point to sdram              */
-#define CFG_PCI_PTM1MS      0x80000001	/* 2GB, enable hard-wired to 1 */
-#define CFG_PCI_PTM1PCI     0x00000000	/* Host: use this pci address  */
-#define CFG_PCI_PTM2LA      0x00000000	/* disabled                    */
-#define CFG_PCI_PTM2MS	    0x00000000	/* disabled                    */
-#define CFG_PCI_PTM2PCI     0x04000000	/* Host: use this pci address  */
+#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x10e8	/* AMCC */
+#define CONFIG_SYS_PCI_SUBSYS_DEVICEID 0xcafe	/* Whatever */
+#define CONFIG_SYS_PCI_CLASSCODE       0x0600  /* PCI Class Code: bridge/host */
+#define CONFIG_SYS_PCI_PTM1LA	    0x00000000	/* point to sdram              */
+#define CONFIG_SYS_PCI_PTM1MS      0x80000001	/* 2GB, enable hard-wired to 1 */
+#define CONFIG_SYS_PCI_PTM1PCI     0x00000000	/* Host: use this pci address  */
+#define CONFIG_SYS_PCI_PTM2LA      0x00000000	/* disabled                    */
+#define CONFIG_SYS_PCI_PTM2MS	    0x00000000	/* disabled                    */
+#define CONFIG_SYS_PCI_PTM2PCI     0x04000000	/* Host: use this pci address  */
 #define CONFIG_EEPRO100		1
 
 /*-----------------------------------------------------------------------
  * Start addresses for the final memory configuration
  * (Set up by the startup code)
  */
-#define CFG_FLASH_BASE		0xFFE00000
+#define CONFIG_SYS_FLASH_BASE		0xFFE00000
 
 /*-----------------------------------------------------------------------
  * FLASH organization
  */
-#define CFG_MAX_FLASH_BANKS	2	/* max number of memory banks		*/
-#define CFG_MAX_FLASH_SECT	256	/* max number of sectors on one chip	*/
+#define CONFIG_SYS_MAX_FLASH_BANKS	2	/* max number of memory banks		*/
+#define CONFIG_SYS_MAX_FLASH_SECT	256	/* max number of sectors on one chip	*/
 
-#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
-#define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
+#define CONFIG_SYS_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
+#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
 
-#define CFG_FLASH_ADDR0         0x555
-#define CFG_FLASH_ADDR1         0x2aa
-#define CFG_FLASH_WORD_SIZE     unsigned short
+#define CONFIG_SYS_FLASH_ADDR0         0x555
+#define CONFIG_SYS_FLASH_ADDR1         0x2aa
+#define CONFIG_SYS_FLASH_WORD_SIZE     unsigned short
 
-#ifdef CFG_ENV_IS_IN_FLASH
-#define CFG_ENV_SECT_SIZE	0x10000	/* size of one complete sector	*/
-#define CFG_ENV_ADDR		(CFG_MONITOR_BASE-CFG_ENV_SECT_SIZE)
-#define CFG_ENV_SIZE		0x4000	/* Total Size of Environment Sector	*/
+#ifdef CONFIG_ENV_IS_IN_FLASH
+#define CONFIG_ENV_SECT_SIZE	0x10000	/* size of one complete sector	*/
+#define CONFIG_ENV_ADDR		(CONFIG_SYS_MONITOR_BASE-CONFIG_ENV_SECT_SIZE)
+#define CONFIG_ENV_SIZE		0x4000	/* Total Size of Environment Sector	*/
 
 /* Address and size of Redundant Environment Sector	*/
-#define CFG_ENV_ADDR_REDUND	(CFG_ENV_ADDR-CFG_ENV_SECT_SIZE)
-#define CFG_ENV_SIZE_REDUND	(CFG_ENV_SIZE)
-#endif /* CFG_ENV_IS_IN_FLASH */
+#define CONFIG_ENV_ADDR_REDUND	(CONFIG_ENV_ADDR-CONFIG_ENV_SECT_SIZE)
+#define CONFIG_ENV_SIZE_REDUND	(CONFIG_ENV_SIZE)
+#endif /* CONFIG_ENV_IS_IN_FLASH */
 
 /*-----------------------------------------------------------------------
  * NVRAM organization
  */
-#define CFG_NVRAM_BASE_ADDR	0xf0000000	/* NVRAM base address */
-#define CFG_NVRAM_SIZE		0x1ff8		/* NVRAM size */
+#define CONFIG_SYS_NVRAM_BASE_ADDR	0xf0000000	/* NVRAM base address */
+#define CONFIG_SYS_NVRAM_SIZE		0x1ff8		/* NVRAM size */
 
-#ifdef CFG_ENV_IS_IN_NVRAM
-#define CFG_ENV_SIZE		0x0ff8		/* Size of Environment vars */
-#define CFG_ENV_ADDR		\
-	(CFG_NVRAM_BASE_ADDR+CFG_NVRAM_SIZE-CFG_ENV_SIZE)	/* Env*/
+#ifdef CONFIG_ENV_IS_IN_NVRAM
+#define CONFIG_ENV_SIZE		0x0ff8		/* Size of Environment vars */
+#define CONFIG_ENV_ADDR		\
+	(CONFIG_SYS_NVRAM_BASE_ADDR+CONFIG_SYS_NVRAM_SIZE-CONFIG_ENV_SIZE)	/* Env*/
 #endif
 
 /*-----------------------------------------------------------------------
  * PPC405 GPIO Configuration
  */
-#define CFG_4xx_GPIO_TABLE { /*				GPIO	Alternate1		*/	\
+#define CONFIG_SYS_4xx_GPIO_TABLE { /*				GPIO	Alternate1		*/	\
 {												\
 /* GPIO Core 0 */										\
 { GPIO_BASE, GPIO_OUT, GPIO_SEL,  GPIO_OUT_NO_CHG }, /* GPIO0	PerBLast    SPI CS	*/	\
@@ -274,48 +274,48 @@ unsigned char spi_read(void);
  * BR0/1 and OR0/1 (FLASH)
  */
 
-#define FLASH_BASE0_PRELIM CFG_FLASH_BASE /* FLASH bank #0 */
+#define FLASH_BASE0_PRELIM CONFIG_SYS_FLASH_BASE /* FLASH bank #0 */
 #define FLASH_BASE1_PRELIM  0xFC000000	/* FLASH bank #1 */
 
 /*-----------------------------------------------------------------------
  * Definitions for initial stack pointer and data area (in data cache)
  */
 /* use on chip memory (OCM) for temperary stack until sdram is tested */
-#define CFG_TEMP_STACK_OCM        1
+#define CONFIG_SYS_TEMP_STACK_OCM        1
 
 /* On Chip Memory location */
-#define CFG_OCM_DATA_ADDR	0xF8000000
-#define CFG_OCM_DATA_SIZE	0x1000
-#define CFG_INIT_RAM_ADDR	CFG_OCM_DATA_ADDR /* inside of SDRAM		*/
-#define CFG_INIT_RAM_END	CFG_OCM_DATA_SIZE /* End of used area in RAM	*/
+#define CONFIG_SYS_OCM_DATA_ADDR	0xF8000000
+#define CONFIG_SYS_OCM_DATA_SIZE	0x1000
+#define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_OCM_DATA_ADDR /* inside of SDRAM		*/
+#define CONFIG_SYS_INIT_RAM_END	CONFIG_SYS_OCM_DATA_SIZE /* End of used area in RAM	*/
 
-#define CFG_GBL_DATA_SIZE      128  /* size in bytes reserved for initial data */
-#define CFG_GBL_DATA_OFFSET    (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP_OFFSET      CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_GBL_DATA_SIZE      128  /* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET    (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET      CONFIG_SYS_GBL_DATA_OFFSET
 
 /*-----------------------------------------------------------------------
  * External Bus Controller (EBC) Setup
  */
 
 /* Memory Bank 0 (Flash/SRAM) initialization */
-#define CFG_EBC_PB0AP           0x03815600
-#define CFG_EBC_PB0CR           0xFFE3A000  /* BAS=0xFFE,BS=2MB,BU=R/W,BW=16bit */
+#define CONFIG_SYS_EBC_PB0AP           0x03815600
+#define CONFIG_SYS_EBC_PB0CR           0xFFE3A000  /* BAS=0xFFE,BS=2MB,BU=R/W,BW=16bit */
 
 /* Memory Bank 1 (NVRAM/RTC) initialization */
-#define CFG_EBC_PB1AP           0x05815600
-#define CFG_EBC_PB1CR           0xFC0BA000  /* BAS=0xFc0,BS=32MB,BU=R/W,BW=16bit */
+#define CONFIG_SYS_EBC_PB1AP           0x05815600
+#define CONFIG_SYS_EBC_PB1CR           0xFC0BA000  /* BAS=0xFc0,BS=32MB,BU=R/W,BW=16bit */
 
 /* Memory Bank 2 (USB device) initialization */
-#define CFG_EBC_PB2AP           0x03016600
-#define CFG_EBC_PB2CR           0x50018000 /* BAS=0x500,BS=1MB,BU=R/W,BW=8bit */
+#define CONFIG_SYS_EBC_PB2AP           0x03016600
+#define CONFIG_SYS_EBC_PB2CR           0x50018000 /* BAS=0x500,BS=1MB,BU=R/W,BW=8bit */
 
 /* Memory Bank 3 (LCM and D-flip-flop) initialization */
-#define CFG_EBC_PB3AP           0x158FF600
-#define CFG_EBC_PB3CR           0x50118000 /* BAS=0x501,BS=1MB,BU=R/W,BW=8bit */
+#define CONFIG_SYS_EBC_PB3AP           0x158FF600
+#define CONFIG_SYS_EBC_PB3CR           0x50118000 /* BAS=0x501,BS=1MB,BU=R/W,BW=8bit */
 
 /* Memory Bank 4 (not install) initialization */
-#define CFG_EBC_PB4AP           0x158FF600
-#define CFG_EBC_PB4CR           0x5021A000
+#define CONFIG_SYS_EBC_PB4AP           0x158FF600
+#define CONFIG_SYS_EBC_PB4CR           0x5021A000
 
 #define CPLD_REG0_ADDR	0x50100000
 #define CPLD_REG1_ADDR	0x50100001
diff --git a/include/configs/taishan.h b/include/configs/taishan.h
index 81133bb5c..6423fd7f4 100644
--- a/include/configs/taishan.h
+++ b/include/configs/taishan.h
@@ -48,66 +48,66 @@
  * Base addresses -- Note these are effective addresses where the
  * actual resources get mapped (not physical addresses)
  *----------------------------------------------------------------------*/
-#define CFG_FLASH_BASE		0xfc000000	/* start of FLASH	*/
-#define CFG_PCI_MEMBASE		0x80000000	/* mapped pci memory	*/
-#define CFG_PERIPHERAL_BASE	0xe0000000	/* internal peripherals	*/
-#define CFG_ISRAM_BASE		0xc0000000	/* internal SRAM	*/
-#define CFG_PCI_BASE		0xd0000000	/* internal PCI regs	*/
+#define CONFIG_SYS_FLASH_BASE		0xfc000000	/* start of FLASH	*/
+#define CONFIG_SYS_PCI_MEMBASE		0x80000000	/* mapped pci memory	*/
+#define CONFIG_SYS_PERIPHERAL_BASE	0xe0000000	/* internal peripherals	*/
+#define CONFIG_SYS_ISRAM_BASE		0xc0000000	/* internal SRAM	*/
+#define CONFIG_SYS_PCI_BASE		0xd0000000	/* internal PCI regs	*/
 
-#define CFG_EBC0_FLASH_BASE	CFG_FLASH_BASE
-#define CFG_EBC1_FPGA_BASE	(CFG_PERIPHERAL_BASE + 0x01000000)
-#define CFG_EBC2_LCM_BASE	(CFG_PERIPHERAL_BASE + 0x02000000)
-#define CFG_EBC3_CONN_BASE	(CFG_PERIPHERAL_BASE + 0x08000000)
+#define CONFIG_SYS_EBC0_FLASH_BASE	CONFIG_SYS_FLASH_BASE
+#define CONFIG_SYS_EBC1_FPGA_BASE	(CONFIG_SYS_PERIPHERAL_BASE + 0x01000000)
+#define CONFIG_SYS_EBC2_LCM_BASE	(CONFIG_SYS_PERIPHERAL_BASE + 0x02000000)
+#define CONFIG_SYS_EBC3_CONN_BASE	(CONFIG_SYS_PERIPHERAL_BASE + 0x08000000)
 
-#define CFG_GPIO_BASE		(CFG_PERIPHERAL_BASE + 0x00000700)
+#define CONFIG_SYS_GPIO_BASE		(CONFIG_SYS_PERIPHERAL_BASE + 0x00000700)
 
 /*-----------------------------------------------------------------------
  * Initial RAM & stack pointer (placed in internal SRAM)
  *----------------------------------------------------------------------*/
-#define CFG_TEMP_STACK_OCM	1
-#define CFG_OCM_DATA_ADDR	CFG_ISRAM_BASE
-#define CFG_INIT_RAM_ADDR	CFG_ISRAM_BASE  /* Initial RAM address	*/
-#define CFG_INIT_RAM_END	0x2000		/* End of used area in RAM*/
-#define CFG_GBL_DATA_SIZE	128		/* num bytes initial data*/
+#define CONFIG_SYS_TEMP_STACK_OCM	1
+#define CONFIG_SYS_OCM_DATA_ADDR	CONFIG_SYS_ISRAM_BASE
+#define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_ISRAM_BASE  /* Initial RAM address	*/
+#define CONFIG_SYS_INIT_RAM_END	0x2000		/* End of used area in RAM*/
+#define CONFIG_SYS_GBL_DATA_SIZE	128		/* num bytes initial data*/
 
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_POST_WORD_ADDR	(CFG_GBL_DATA_OFFSET - 0x4)
-#define CFG_INIT_SP_OFFSET	CFG_POST_WORD_ADDR
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_POST_WORD_ADDR	(CONFIG_SYS_GBL_DATA_OFFSET - 0x4)
+#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_POST_WORD_ADDR
 
 /*-----------------------------------------------------------------------
  * Serial Port
  *----------------------------------------------------------------------*/
 #define CONFIG_UART1_CONSOLE	1	/* use of UART1 as console	*/
-#define CFG_EXT_SERIAL_CLOCK	(1843200 * 6)	/* Ext clk @ 11.059 MHz */
+#define CONFIG_SYS_EXT_SERIAL_CLOCK	(1843200 * 6)	/* Ext clk @ 11.059 MHz */
 
 /*-----------------------------------------------------------------------
  * Environment
  *----------------------------------------------------------------------*/
-#define CFG_ENV_IS_IN_FLASH     1	/* use FLASH for environment vars	*/
+#define CONFIG_ENV_IS_IN_FLASH     1	/* use FLASH for environment vars	*/
 
 /*-----------------------------------------------------------------------
  * FLASH related
  *----------------------------------------------------------------------*/
-#define CFG_FLASH_CFI
+#define CONFIG_SYS_FLASH_CFI
 #define CONFIG_FLASH_CFI_DRIVER
-#define CFG_FLASH_EMPTY_INFO		/* print 'E' for empty sector on flinfo */
-#define CFG_FLASH_USE_BUFFER_WRITE 1	/* use buffered writes (20x faster)	*/
+#define CONFIG_SYS_FLASH_EMPTY_INFO		/* print 'E' for empty sector on flinfo */
+#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1	/* use buffered writes (20x faster)	*/
 
-#define CFG_FLASH_BANKS_LIST    {CFG_FLASH_BASE}
-#define CFG_MAX_FLASH_BANKS     1		    /* number of banks	    */
-#define CFG_MAX_FLASH_SECT	1024		    /* sectors per device   */
+#define CONFIG_SYS_FLASH_BANKS_LIST    {CONFIG_SYS_FLASH_BASE}
+#define CONFIG_SYS_MAX_FLASH_BANKS     1		    /* number of banks	    */
+#define CONFIG_SYS_MAX_FLASH_SECT	1024		    /* sectors per device   */
 
-#undef	CFG_FLASH_CHECKSUM
-#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
-#define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
+#undef	CONFIG_SYS_FLASH_CHECKSUM
+#define CONFIG_SYS_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
+#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
 
-#define CFG_ENV_SECT_SIZE	0x40000 /* size of one complete sector	*/
-#define CFG_ENV_ADDR		(CFG_MONITOR_BASE-CFG_ENV_SECT_SIZE)
-#define	CFG_ENV_SIZE		0x4000	/* Total Size of Environment Sector	*/
+#define CONFIG_ENV_SECT_SIZE	0x40000 /* size of one complete sector	*/
+#define CONFIG_ENV_ADDR		(CONFIG_SYS_MONITOR_BASE-CONFIG_ENV_SECT_SIZE)
+#define	CONFIG_ENV_SIZE		0x4000	/* Total Size of Environment Sector	*/
 
 /* Address and size of Redundant Environment Sector	*/
-#define CFG_ENV_ADDR_REDUND	(CFG_ENV_ADDR-CFG_ENV_SECT_SIZE)
-#define CFG_ENV_SIZE_REDUND	(CFG_ENV_SIZE)
+#define CONFIG_ENV_ADDR_REDUND	(CONFIG_ENV_ADDR-CONFIG_ENV_SECT_SIZE)
+#define CONFIG_ENV_SIZE_REDUND	(CONFIG_ENV_SIZE)
 
 /*-----------------------------------------------------------------------
  * E2PROM bootstrap configure value
@@ -128,29 +128,28 @@
  *----------------------------------------------------------------------*/
 #undef CONFIG_SPD_EEPROM		/* Don't use SPD EEPROM for setup	*/
 #define CONFIG_SDRAM_BANK0	1	/* init onboard DDR SDRAM bank 0	*/
-#define	CFG_SDRAM0_TR0		0xC10A401A
+#define	CONFIG_SYS_SDRAM0_TR0		0xC10A401A
 #undef CONFIG_SDRAM_ECC			/* enable ECC support			*/
 
 /*-----------------------------------------------------------------------
  * I2C
  *----------------------------------------------------------------------*/
-#define CFG_I2C_SPEED		400000	/* I2C speed and slave address	*/
+#define CONFIG_SYS_I2C_SPEED		400000	/* I2C speed and slave address	*/
 
-#undef CFG_I2C_MULTI_EEPROMS
-#define CFG_I2C_EEPROM_ADDR	0x50
-#define CFG_I2C_EEPROM_ADDR_LEN 1
-#define CFG_EEPROM_PAGE_WRITE_ENABLE
-#define CFG_EEPROM_PAGE_WRITE_BITS 3
-#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10
+#undef CONFIG_SYS_I2C_MULTI_EEPROMS
+#define CONFIG_SYS_I2C_EEPROM_ADDR	0x50
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10
 
-#define CFG_BOOTSTRAP_IIC_ADDR	0x50
+#define CONFIG_SYS_BOOTSTRAP_IIC_ADDR	0x50
 
 /* I2C SYSMON (LM75, AD7414 is almost compatible)			*/
 #define CONFIG_DTT_LM75		1		/* ON Semi's LM75	*/
 #define CONFIG_DTT_SENSORS	{0}		/* Sensor addresses	*/
-#define CFG_DTT_MAX_TEMP	70
-#define CFG_DTT_LOW_TEMP	-30
-#define CFG_DTT_HYSTERESIS	3
+#define CONFIG_SYS_DTT_MAX_TEMP	70
+#define CONFIG_SYS_DTT_LOW_TEMP	-30
+#define CONFIG_SYS_DTT_HYSTERESIS	3
 
 /*
  * Default environment variables
@@ -197,12 +196,12 @@
 #define CONFIG_PCI_PNP			/* do pci plug-and-play		*/
 #define CONFIG_EEPRO100       1		/* include PCI EEPRO100		*/
 #define CONFIG_PCI_SCAN_SHOW		/* show pci devices on startup	*/
-#define CFG_PCI_TARGBASE    0x80000000	/* PCIaddr mapped to CFG_PCI_MEMBASE */
+#define CONFIG_SYS_PCI_TARGBASE    0x80000000	/* PCIaddr mapped to CONFIG_SYS_PCI_MEMBASE */
 
 /* Board-specific PCI */
-#define CFG_PCI_TARGET_INIT		/* let board init pci target    */
+#define CONFIG_SYS_PCI_TARGET_INIT		/* let board init pci target    */
 
-#define CFG_PCI_SUBSYS_VENDORID 0x10e8	/* AMCC */
-#define CFG_PCI_SUBSYS_DEVICEID 0xcafe	/* Whatever */
+#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x10e8	/* AMCC */
+#define CONFIG_SYS_PCI_SUBSYS_DEVICEID 0xcafe	/* Whatever */
 
 #endif	/* __CONFIG_H */
diff --git a/include/configs/tb0229.h b/include/configs/tb0229.h
index fc2357d40..9285c9dcc 100644
--- a/include/configs/tb0229.h
+++ b/include/configs/tb0229.h
@@ -38,7 +38,7 @@
 
 #define CONFIG_BAUDRATE		115200
 
-#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
 
 #define CONFIG_TIMESTAMP		/* Print image info with timestamp */
 
@@ -112,72 +112,72 @@
 /*
  * Miscellaneous configurable options
  */
-#define CFG_LONGHELP				/* undef to save memory	     */
-#define CFG_PROMPT		"# "		/* Monitor Command Prompt    */
-#define CFG_CBSIZE		256		/* Console I/O Buffer Size   */
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16)  /* Print Buffer Size */
-#define CFG_MAXARGS		16		/* max number of command args*/
+#define CONFIG_SYS_LONGHELP				/* undef to save memory	     */
+#define CONFIG_SYS_PROMPT		"# "		/* Monitor Command Prompt    */
+#define CONFIG_SYS_CBSIZE		256		/* Console I/O Buffer Size   */
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)  /* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS		16		/* max number of command args*/
 
-#define CFG_MALLOC_LEN		128*1024
+#define CONFIG_SYS_MALLOC_LEN		128*1024
 
-#define CFG_BOOTPARAMS_LEN	128*1024
+#define CONFIG_SYS_BOOTPARAMS_LEN	128*1024
 
-#define CFG_MIPS_TIMER_FREQ	(CPU_TCLOCK_RATE/4)
+#define CONFIG_SYS_MIPS_TIMER_FREQ	(CPU_TCLOCK_RATE/4)
 
-#define CFG_HZ			1000
+#define CONFIG_SYS_HZ			1000
 
-#define CFG_SDRAM_BASE		0x80000000
+#define CONFIG_SYS_SDRAM_BASE		0x80000000
 
-#define CFG_LOAD_ADDR		0x80400000	/* default load address */
+#define CONFIG_SYS_LOAD_ADDR		0x80400000	/* default load address */
 
-#define CFG_MEMTEST_START	0x80000000
-#define CFG_MEMTEST_END		0x80800000
+#define CONFIG_SYS_MEMTEST_START	0x80000000
+#define CONFIG_SYS_MEMTEST_END		0x80800000
 
 /*-----------------------------------------------------------------------
  * FLASH and environment organization
  */
-#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks */
-#define CFG_MAX_FLASH_SECT	(128)	/* max number of sectors on one chip */
+#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks */
+#define CONFIG_SYS_MAX_FLASH_SECT	(128)	/* max number of sectors on one chip */
 
 #define PHYS_FLASH_1		0xbfc00000 /* Flash Bank #1 */
 
 /* The following #defines are needed to get flash environment right */
-#define CFG_MONITOR_BASE	TEXT_BASE
-#define CFG_MONITOR_LEN		(192 << 10)
+#define CONFIG_SYS_MONITOR_BASE	TEXT_BASE
+#define CONFIG_SYS_MONITOR_LEN		(192 << 10)
 
-#define CFG_INIT_SP_OFFSET	0x400000
+#define CONFIG_SYS_INIT_SP_OFFSET	0x400000
 
-#define CFG_FLASH_BASE		PHYS_FLASH_1
+#define CONFIG_SYS_FLASH_BASE		PHYS_FLASH_1
 
 /* timeout values are in ticks */
-#define CFG_FLASH_ERASE_TOUT	(20 * CFG_HZ) /* Timeout for Flash Erase */
-#define CFG_FLASH_WRITE_TOUT	(2 * CFG_HZ) /* Timeout for Flash Write */
+#define CONFIG_SYS_FLASH_ERASE_TOUT	(20 * CONFIG_SYS_HZ) /* Timeout for Flash Erase */
+#define CONFIG_SYS_FLASH_WRITE_TOUT	(2 * CONFIG_SYS_HZ) /* Timeout for Flash Write */
 
-#define CFG_ENV_IS_IN_FLASH	1
+#define CONFIG_ENV_IS_IN_FLASH	1
 
 /* Address and size of Primary Environment Sector	*/
-#define CFG_ENV_ADDR		0xBFC40000
-#define CFG_ENV_SIZE		0x20000
+#define CONFIG_ENV_ADDR		0xBFC40000
+#define CONFIG_ENV_SIZE		0x20000
 
-#define CFG_DIRECT_FLASH_TFTP
+#define CONFIG_SYS_DIRECT_FLASH_TFTP
 
 #define CONFIG_NR_DRAM_BANKS	1
 
 /*-----------------------------------------------------------------------
  * Cache Configuration
  */
-#define CFG_DCACHE_SIZE		16384
-#define CFG_ICACHE_SIZE		16384
-#define CFG_CACHELINE_SIZE	16
+#define CONFIG_SYS_DCACHE_SIZE		16384
+#define CONFIG_SYS_ICACHE_SIZE		16384
+#define CONFIG_SYS_CACHELINE_SIZE	16
 
 /*-----------------------------------------------------------------------
  * Serial Configuration
  */
-#define CFG_NS16550
-#define CFG_NS16550_SERIAL
-#define CFG_NS16550_REG_SIZE	 1
-#define CFG_NS16550_CLK		 18432000
-#define CFG_NS16550_COM1	 0xaf000800
+#define CONFIG_SYS_NS16550
+#define CONFIG_SYS_NS16550_SERIAL
+#define CONFIG_SYS_NS16550_REG_SIZE	 1
+#define CONFIG_SYS_NS16550_CLK		 18432000
+#define CONFIG_SYS_NS16550_COM1	 0xaf000800
 
 /*-----------------------------------------------------------------------
  * PCI stuff
@@ -186,7 +186,7 @@
 #define CONFIG_PCI_PNP
 #define CONFIG_NET_MULTI
 #define CONFIG_EEPRO100
-#define CFG_RX_ETH_BUFFER	8		/* use 8 rx buffer on eepro100	*/
+#define CONFIG_SYS_RX_ETH_BUFFER	8		/* use 8 rx buffer on eepro100	*/
 
 #define CONFIG_RTL8139
 
diff --git a/include/configs/trab.h b/include/configs/trab.h
index b0615a0e3..562cd6093 100644
--- a/include/configs/trab.h
+++ b/include/configs/trab.h
@@ -58,7 +58,7 @@
 #define CONFIG_SETUP_MEMORY_TAGS 1
 #define CONFIG_INITRD_TAG	 1
 
-#define CFG_DEVICE_NULLDEV	 1	/* enble null device		*/
+#define CONFIG_SYS_DEVICE_NULLDEV	 1	/* enble null device		*/
 #define CONFIG_SILENT_CONSOLE	 1	/* enable silent startup	*/
 
 #define CONFIG_VERSION_VARIABLE	1       /* include version env variable */
@@ -69,33 +69,33 @@
  * address 0x54 with 8bit addressing
  ***********************************************************/
 #define CONFIG_HARD_I2C			/* I2C with hardware support */
-#define CFG_I2C_SPEED		100000	/* I2C speed */
-#define CFG_I2C_SLAVE		0x7F	/* I2C slave addr */
+#define CONFIG_SYS_I2C_SPEED		100000	/* I2C speed */
+#define CONFIG_SYS_I2C_SLAVE		0x7F	/* I2C slave addr */
 
-#define CFG_I2C_EEPROM_ADDR	0x54	/* EEPROM address */
-#define CFG_I2C_EEPROM_ADDR_LEN	1	/* 1 address byte */
+#define CONFIG_SYS_I2C_EEPROM_ADDR	0x54	/* EEPROM address */
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN	1	/* 1 address byte */
 
-#define CFG_I2C_EEPROM_ADDR_OVERFLOW 0x01
-#define CFG_EEPROM_PAGE_WRITE_BITS 3	/* 8 bytes page write mode on 24C04 */
-#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10
+#define CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW 0x01
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3	/* 8 bytes page write mode on 24C04 */
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10
 
 /* USB stuff */
 #define CONFIG_USB_OHCI_NEW	1
 #define CONFIG_USB_STORAGE	1
 #define CONFIG_DOS_PARTITION	1
 
-#undef CFG_USB_OHCI_BOARD_INIT
-#define CFG_USB_OHCI_CPU_INIT	1
+#undef CONFIG_SYS_USB_OHCI_BOARD_INIT
+#define CONFIG_SYS_USB_OHCI_CPU_INIT	1
 
-#define CFG_USB_OHCI_REGS_BASE	0x14200000
-#define CFG_USB_OHCI_SLOT_NAME	"s3c2400"
-#define CFG_USB_OHCI_MAX_ROOT_PORTS	15
+#define CONFIG_SYS_USB_OHCI_REGS_BASE	0x14200000
+#define CONFIG_SYS_USB_OHCI_SLOT_NAME	"s3c2400"
+#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS	15
 
 /*
  * Size of malloc() pool
  */
-#define CFG_MALLOC_LEN		(CFG_ENV_SIZE + 128*1024)
-#define CFG_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
+#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + 128*1024)
+#define CONFIG_SYS_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
 
 /*
  * Hardware drivers
@@ -179,7 +179,7 @@
 
 
 /* moved up */
-#define CFG_HUSH_PARSER		1	/* use "hush" command parser	*/
+#define CONFIG_SYS_HUSH_PARSER		1	/* use "hush" command parser	*/
 
 #define CONFIG_BOOTDELAY	5
 #define CONFIG_ZERO_BOOTDELAY_CHECK	/* allow to break in always */
@@ -192,7 +192,7 @@
 #define CONFIG_BOOTCOMMAND	"burn_in"
 
 #ifndef CONFIG_FLASH_8MB	/* current config: 16 MB flash */
-#ifdef CFG_HUSH_PARSER
+#ifdef CONFIG_SYS_HUSH_PARSER
 #define	CONFIG_EXTRA_ENV_SETTINGS	\
 	"nfs_args=setenv bootargs root=/dev/nfs rw " \
 		"nfsroot=$serverip:$rootpath\0" \
@@ -214,7 +214,7 @@
 	"mdm_init1=ATZ\0" \
 	"mdm_init2=ATS0=1\0" \
 	"mdm_flow_control=rts/cts\0"
-#else /* !CFG_HUSH_PARSER */
+#else /* !CONFIG_SYS_HUSH_PARSER */
 #define	CONFIG_EXTRA_ENV_SETTINGS	\
 	"nfs_args=setenv bootargs root=/dev/nfs rw " \
 		"nfsroot=${serverip}:${rootpath}\0" \
@@ -236,9 +236,9 @@
 	"mdm_init1=ATZ\0" \
 	"mdm_init2=ATS0=1\0" \
 	"mdm_flow_control=rts/cts\0"
-#endif	/* CFG_HUSH_PARSER */
+#endif	/* CONFIG_SYS_HUSH_PARSER */
 #else	/* CONFIG_FLASH_8MB	 => 8 MB flash */
-#ifdef CFG_HUSH_PARSER
+#ifdef CONFIG_SYS_HUSH_PARSER
 #define	CONFIG_EXTRA_ENV_SETTINGS	\
 	"nfs_args=setenv bootargs root=/dev/nfs rw " \
 		"nfsroot=$serverip:$rootpath\0" \
@@ -261,7 +261,7 @@
 	"mdm_init1=ATZ\0" \
 	"mdm_init2=ATS0=1\0" \
 	"mdm_flow_control=rts/cts\0"
-#else /* !CFG_HUSH_PARSER */
+#else /* !CONFIG_SYS_HUSH_PARSER */
 #define	CONFIG_EXTRA_ENV_SETTINGS	\
 	"nfs_args=setenv bootargs root=/dev/nfs rw " \
 		"nfsroot=${serverip}:${rootpath}\0" \
@@ -284,7 +284,7 @@
 	"mdm_init1=ATZ\0" \
 	"mdm_init2=ATS0=1\0" \
 	"mdm_flow_control=rts/cts\0"
-#endif /* CFG_HUSH_PARSER */
+#endif /* CONFIG_SYS_HUSH_PARSER */
 #endif	/* CONFIG_FLASH_8MB */
 
 #if 1	/* feel free to disable for development */
@@ -303,38 +303,38 @@
 /*
  * Miscellaneous configurable options
  */
-#define	CFG_LONGHELP				/* undef to save memory		*/
-#define	CFG_PROMPT		"TRAB # "	/* Monitor Command Prompt	*/
-#ifdef	CFG_HUSH_PARSER
-#define CFG_PROMPT_HUSH_PS2	"> "
+#define	CONFIG_SYS_LONGHELP				/* undef to save memory		*/
+#define	CONFIG_SYS_PROMPT		"TRAB # "	/* Monitor Command Prompt	*/
+#ifdef	CONFIG_SYS_HUSH_PARSER
+#define CONFIG_SYS_PROMPT_HUSH_PS2	"> "
 #endif
 
-#define	CFG_CBSIZE		256		/* Console I/O Buffer Size	*/
-#define	CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define	CFG_MAXARGS		16		/* max number of command args	*/
-#define CFG_BARGSIZE		CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+#define	CONFIG_SYS_CBSIZE		256		/* Console I/O Buffer Size	*/
+#define	CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define	CONFIG_SYS_MAXARGS		16		/* max number of command args	*/
+#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
 
-#define CFG_MEMTEST_START	0x0C000000	/* memtest works on	*/
-#define CFG_MEMTEST_END		0x0D000000	/* 16 MB in DRAM	*/
+#define CONFIG_SYS_MEMTEST_START	0x0C000000	/* memtest works on	*/
+#define CONFIG_SYS_MEMTEST_END		0x0D000000	/* 16 MB in DRAM	*/
 
-#undef CFG_CLKS_IN_HZ		/* everything, incl board info, in Hz */
+#undef CONFIG_SYS_CLKS_IN_HZ		/* everything, incl board info, in Hz */
 
-#define	CFG_LOAD_ADDR		0x0CF00000	/* default load address	*/
+#define	CONFIG_SYS_LOAD_ADDR		0x0CF00000	/* default load address	*/
 
 #ifdef CONFIG_TRAB_50MHZ
 /* the PWM TImer 4 uses a counter of 15625 for 10 ms, so we need */
 /* it to wrap 100 times (total 1562500) to get 1 sec. */
 /* this should _really_ be calculated !! */
-#define	CFG_HZ			1562500
+#define	CONFIG_SYS_HZ			1562500
 #else
 /* the PWM TImer 4 uses a counter of 10390 for 10 ms, so we need */
 /* it to wrap 100 times (total 1039000) to get 1 sec. */
 /* this should _really_ be calculated !! */
-#define	CFG_HZ			1039000
+#define	CONFIG_SYS_HZ			1039000
 #endif
 
 /* valid baudrates */
-#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
 
 #define CONFIG_MISC_INIT_R		/* have misc_init_r() function	*/
 
@@ -369,11 +369,11 @@
 #define PHYS_SDRAM_1_SIZE	0x01000000	/* 16 MB */
 #endif
 
-#define CFG_FLASH_BASE		0x00000000	/* Flash Bank #1 */
+#define CONFIG_SYS_FLASH_BASE		0x00000000	/* Flash Bank #1 */
 
 /* The following #defines are needed to get flash environment right */
-#define	CFG_MONITOR_BASE	CFG_FLASH_BASE
-#define	CFG_MONITOR_LEN		(256 << 10)
+#define	CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_FLASH_BASE
+#define	CONFIG_SYS_MONITOR_LEN		(256 << 10)
 
 /* Dynamic MTD partition support */
 #define CONFIG_JFFS2_CMDLINE
@@ -392,37 +392,37 @@
 /*-----------------------------------------------------------------------
  * FLASH and environment organization
  */
-#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks */
+#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks */
 #ifndef CONFIG_FLASH_8MB
-#define CFG_MAX_FLASH_SECT	128	/* max number of sectors on one chip */
+#define CONFIG_SYS_MAX_FLASH_SECT	128	/* max number of sectors on one chip */
 #else
-#define CFG_MAX_FLASH_SECT	71	/* max number of sectors on one chip */
+#define CONFIG_SYS_MAX_FLASH_SECT	71	/* max number of sectors on one chip */
 #endif
 
 /* timeout values are in ticks */
-#define CFG_FLASH_ERASE_TOUT	(15*CFG_HZ) /* Timeout for Flash Erase */
-#define CFG_FLASH_WRITE_TOUT	(2*CFG_HZ) /* Timeout for Flash Write */
+#define CONFIG_SYS_FLASH_ERASE_TOUT	(15*CONFIG_SYS_HZ) /* Timeout for Flash Erase */
+#define CONFIG_SYS_FLASH_WRITE_TOUT	(2*CONFIG_SYS_HZ) /* Timeout for Flash Write */
 
-#define	CFG_ENV_IS_IN_FLASH	1
+#define	CONFIG_ENV_IS_IN_FLASH	1
 
 /* Address and size of Primary Environment Sector	*/
 #ifndef CONFIG_FLASH_8MB
-#define CFG_ENV_ADDR		(CFG_FLASH_BASE + 0x60000)
-#define CFG_ENV_SIZE		0x4000
-#define CFG_ENV_SECT_SIZE	0x20000
+#define CONFIG_ENV_ADDR		(CONFIG_SYS_FLASH_BASE + 0x60000)
+#define CONFIG_ENV_SIZE		0x4000
+#define CONFIG_ENV_SECT_SIZE	0x20000
 #else
-#define CFG_ENV_ADDR		(CFG_FLASH_BASE + 0x4000)
-#define CFG_ENV_SIZE		0x4000
-#define CFG_ENV_SECT_SIZE	0x4000
+#define CONFIG_ENV_ADDR		(CONFIG_SYS_FLASH_BASE + 0x4000)
+#define CONFIG_ENV_SIZE		0x4000
+#define CONFIG_ENV_SECT_SIZE	0x4000
 #endif
 
 /* Address and size of Redundant Environment Sector	*/
-#define CFG_ENV_OFFSET_REDUND	(CFG_ENV_ADDR+CFG_ENV_SECT_SIZE)
-#define CFG_ENV_SIZE_REDUND	(CFG_ENV_SIZE)
+#define CONFIG_ENV_OFFSET_REDUND	(CONFIG_ENV_ADDR+CONFIG_ENV_SECT_SIZE)
+#define CONFIG_ENV_SIZE_REDUND	(CONFIG_ENV_SIZE)
 
-#define	CFG_USE_PPCENV			/* Environment embedded in sect .ppcenv */
+#define	CONFIG_SYS_USE_PPCENV			/* Environment embedded in sect .ppcenv */
 
 /* Initial value of the on-board touch screen brightness */
-#define CFG_BRIGHTNESS 0x20
+#define CONFIG_SYS_BRIGHTNESS 0x20
 
 #endif	/* __CONFIG_H */
diff --git a/include/configs/trizepsiv.h b/include/configs/trizepsiv.h
index 6367f873e..b2065ee48 100644
--- a/include/configs/trizepsiv.h
+++ b/include/configs/trizepsiv.h
@@ -54,8 +54,8 @@
 /*
  * Size of malloc() pool
  */
-#define CFG_MALLOC_LEN	    (CFG_ENV_SIZE + 128*1024)
-#define CFG_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
+#define CONFIG_SYS_MALLOC_LEN	    (CONFIG_ENV_SIZE + 128*1024)
+#define CONFIG_SYS_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
 
 /*
  * Hardware drivers
@@ -148,35 +148,35 @@
 /*
  * Miscellaneous configurable options
  */
-#define CFG_HUSH_PARSER		1
-#define CFG_PROMPT_HUSH_PS2	"> "
+#define CONFIG_SYS_HUSH_PARSER		1
+#define CONFIG_SYS_PROMPT_HUSH_PS2	"> "
 
-#define CFG_LONGHELP				/* undef to save memory		*/
-#ifdef CFG_HUSH_PARSER
-#define CFG_PROMPT		"$ "		/* Monitor Command Prompt */
+#define CONFIG_SYS_LONGHELP				/* undef to save memory		*/
+#ifdef CONFIG_SYS_HUSH_PARSER
+#define CONFIG_SYS_PROMPT		"$ "		/* Monitor Command Prompt */
 #else
-#define CFG_PROMPT		"=> "		/* Monitor Command Prompt */
+#define CONFIG_SYS_PROMPT		"=> "		/* Monitor Command Prompt */
 #endif
-#define CFG_CBSIZE		256		/* Console I/O Buffer Size	*/
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define CFG_MAXARGS		16		/* max number of command args	*/
-#define CFG_BARGSIZE		CFG_CBSIZE	/* Boot Argument Buffer Size	*/
-#define CFG_DEVICE_NULLDEV	1
+#define CONFIG_SYS_CBSIZE		256		/* Console I/O Buffer Size	*/
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS		16		/* max number of command args	*/
+#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
+#define CONFIG_SYS_DEVICE_NULLDEV	1
 
-#define CFG_MEMTEST_START	0xa0400000	/* memtest works on	*/
-#define CFG_MEMTEST_END		0xa0800000	/* 4 ... 8 MB in DRAM	*/
+#define CONFIG_SYS_MEMTEST_START	0xa0400000	/* memtest works on	*/
+#define CONFIG_SYS_MEMTEST_END		0xa0800000	/* 4 ... 8 MB in DRAM	*/
 
-#undef	CFG_CLKS_IN_HZ		/* everything, incl board info, in Hz */
+#undef	CONFIG_SYS_CLKS_IN_HZ		/* everything, incl board info, in Hz */
 
-#define CFG_LOAD_ADDR		0xa1000000	/* default load address */
+#define CONFIG_SYS_LOAD_ADDR		0xa1000000	/* default load address */
 
-#define CFG_HZ			3686400		/* incrementer freq: 3.6864 MHz */
-#define CFG_CPUSPEED		0x207		/* need to look more closely, I think this is Turbo = 2x, L=91Mhz */
+#define CONFIG_SYS_HZ			3686400		/* incrementer freq: 3.6864 MHz */
+#define CONFIG_SYS_CPUSPEED		0x207		/* need to look more closely, I think this is Turbo = 2x, L=91Mhz */
 
 						/* valid baudrates */
-#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
 
-#define CFG_MMC_BASE		0xF0000000
+#define CONFIG_SYS_MMC_BASE		0xF0000000
 
 /*
  * Stack sizes
@@ -204,76 +204,76 @@
 
 #define PHYS_FLASH_1		0x00000000 /* Flash Bank #1 */
 
-#define CFG_DRAM_BASE		0xa0000000
-#define CFG_DRAM_SIZE		0x04000000
+#define CONFIG_SYS_DRAM_BASE		0xa0000000
+#define CONFIG_SYS_DRAM_SIZE		0x04000000
 
-#define CFG_FLASH_BASE		PHYS_FLASH_1
+#define CONFIG_SYS_FLASH_BASE		PHYS_FLASH_1
 
 /*
  * GPIO settings
  */
-#define CFG_GPSR0_VAL		0x00018000
-#define CFG_GPSR1_VAL		0x00000000
-#define CFG_GPSR2_VAL		0x400dc000
-#define CFG_GPSR3_VAL		0x00000000
-#define CFG_GPCR0_VAL		0x00000000
-#define CFG_GPCR1_VAL		0x00000000
-#define CFG_GPCR2_VAL		0x00000000
-#define CFG_GPCR3_VAL		0x00000000
-#define CFG_GPDR0_VAL		0x00018000
-#define CFG_GPDR1_VAL		0x00028801
-#define CFG_GPDR2_VAL		0x520dc000
-#define CFG_GPDR3_VAL		0x0001E000
-#define CFG_GAFR0_L_VAL		0x801c0000
-#define CFG_GAFR0_U_VAL		0x00000013
-#define CFG_GAFR1_L_VAL		0x6990100A
-#define CFG_GAFR1_U_VAL		0x00000008
-#define CFG_GAFR2_L_VAL		0xA0000000
-#define CFG_GAFR2_U_VAL		0x010900F2
-#define CFG_GAFR3_L_VAL		0x54000003
-#define CFG_GAFR3_U_VAL		0x00002401
-#define CFG_GRER0_VAL		0x00000000
-#define CFG_GRER1_VAL		0x00000000
-#define CFG_GRER2_VAL		0x00000000
-#define CFG_GRER3_VAL		0x00000000
-#define CFG_GFER0_VAL		0x00000000
-#define CFG_GFER1_VAL		0x00000000
-#define CFG_GFER2_VAL		0x00000000
-#define CFG_GFER3_VAL		0x00000020
-
-
-#define CFG_PSSR_VAL		0x20	/* CHECK */
+#define CONFIG_SYS_GPSR0_VAL		0x00018000
+#define CONFIG_SYS_GPSR1_VAL		0x00000000
+#define CONFIG_SYS_GPSR2_VAL		0x400dc000
+#define CONFIG_SYS_GPSR3_VAL		0x00000000
+#define CONFIG_SYS_GPCR0_VAL		0x00000000
+#define CONFIG_SYS_GPCR1_VAL		0x00000000
+#define CONFIG_SYS_GPCR2_VAL		0x00000000
+#define CONFIG_SYS_GPCR3_VAL		0x00000000
+#define CONFIG_SYS_GPDR0_VAL		0x00018000
+#define CONFIG_SYS_GPDR1_VAL		0x00028801
+#define CONFIG_SYS_GPDR2_VAL		0x520dc000
+#define CONFIG_SYS_GPDR3_VAL		0x0001E000
+#define CONFIG_SYS_GAFR0_L_VAL		0x801c0000
+#define CONFIG_SYS_GAFR0_U_VAL		0x00000013
+#define CONFIG_SYS_GAFR1_L_VAL		0x6990100A
+#define CONFIG_SYS_GAFR1_U_VAL		0x00000008
+#define CONFIG_SYS_GAFR2_L_VAL		0xA0000000
+#define CONFIG_SYS_GAFR2_U_VAL		0x010900F2
+#define CONFIG_SYS_GAFR3_L_VAL		0x54000003
+#define CONFIG_SYS_GAFR3_U_VAL		0x00002401
+#define CONFIG_SYS_GRER0_VAL		0x00000000
+#define CONFIG_SYS_GRER1_VAL		0x00000000
+#define CONFIG_SYS_GRER2_VAL		0x00000000
+#define CONFIG_SYS_GRER3_VAL		0x00000000
+#define CONFIG_SYS_GFER0_VAL		0x00000000
+#define CONFIG_SYS_GFER1_VAL		0x00000000
+#define CONFIG_SYS_GFER2_VAL		0x00000000
+#define CONFIG_SYS_GFER3_VAL		0x00000020
+
+
+#define CONFIG_SYS_PSSR_VAL		0x20	/* CHECK */
 
 /*
  * Clock settings
  */
-#define CFG_CKEN		0x01FFFFFF	/* CHECK */
-#define CFG_CCCR		0x02000290 /*   520Mhz */
+#define CONFIG_SYS_CKEN		0x01FFFFFF	/* CHECK */
+#define CONFIG_SYS_CCCR		0x02000290 /*   520Mhz */
 
 /*
  * Memory settings
  */
 
-#define CFG_MSC0_VAL		0x4df84df0
-#define CFG_MSC1_VAL		0x7ff87ff4
-#define CFG_MSC2_VAL		0xa26936d4
-#define CFG_MDCNFG_VAL		0x880009C9
-#define CFG_MDREFR_VAL		0x20ca201e
-#define CFG_MDMRS_VAL		0x00220022
+#define CONFIG_SYS_MSC0_VAL		0x4df84df0
+#define CONFIG_SYS_MSC1_VAL		0x7ff87ff4
+#define CONFIG_SYS_MSC2_VAL		0xa26936d4
+#define CONFIG_SYS_MDCNFG_VAL		0x880009C9
+#define CONFIG_SYS_MDREFR_VAL		0x20ca201e
+#define CONFIG_SYS_MDMRS_VAL		0x00220022
 
-#define CFG_FLYCNFG_VAL		0x00000000
-#define CFG_SXCNFG_VAL		0x40044004
+#define CONFIG_SYS_FLYCNFG_VAL		0x00000000
+#define CONFIG_SYS_SXCNFG_VAL		0x40044004
 
 /*
  * PCMCIA and CF Interfaces
  */
-#define CFG_MECR_VAL		0x00000001
-#define CFG_MCMEM0_VAL		0x00004204
-#define CFG_MCMEM1_VAL		0x00010204
-#define CFG_MCATT0_VAL		0x00010504
-#define CFG_MCATT1_VAL		0x00010504
-#define CFG_MCIO0_VAL		0x00008407
-#define CFG_MCIO1_VAL		0x0000c108
+#define CONFIG_SYS_MECR_VAL		0x00000001
+#define CONFIG_SYS_MCMEM0_VAL		0x00004204
+#define CONFIG_SYS_MCMEM1_VAL		0x00010204
+#define CONFIG_SYS_MCATT0_VAL		0x00010504
+#define CONFIG_SYS_MCATT1_VAL		0x00010504
+#define CONFIG_SYS_MCIO0_VAL		0x00008407
+#define CONFIG_SYS_MCIO1_VAL		0x0000c108
 
 #define CONFIG_DRIVER_DM9000		1
 #define CONFIG_DM9000_BASE	0x08000000
@@ -281,41 +281,41 @@
 #define DM9000_DATA			(CONFIG_DM9000_BASE+0x8004)
 
 #define CONFIG_USB_OHCI_NEW	1
-#define CFG_USB_OHCI_BOARD_INIT	1
-#define CFG_USB_OHCI_MAX_ROOT_PORTS	3
-#define CFG_USB_OHCI_REGS_BASE	0x4C000000
-#define CFG_USB_OHCI_SLOT_NAME	"trizepsiv"
+#define CONFIG_SYS_USB_OHCI_BOARD_INIT	1
+#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS	3
+#define CONFIG_SYS_USB_OHCI_REGS_BASE	0x4C000000
+#define CONFIG_SYS_USB_OHCI_SLOT_NAME	"trizepsiv"
 #define CONFIG_USB_STORAGE	1
-#define CFG_USB_OHCI_CPU_INIT	1
+#define CONFIG_SYS_USB_OHCI_CPU_INIT	1
 
 /*
  * FLASH and environment organization
  */
 
-#define CFG_FLASH_CFI
+#define CONFIG_SYS_FLASH_CFI
 #define CONFIG_FLASH_CFI_DRIVER	1
 
-#define CFG_MONITOR_BASE	0
-#define CFG_MONITOR_LEN		0x40000
+#define CONFIG_SYS_MONITOR_BASE	0
+#define CONFIG_SYS_MONITOR_LEN		0x40000
 
-#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
-#define CFG_MAX_FLASH_SECT	4 + 255  /* max number of sectors on one chip   */
+#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
+#define CONFIG_SYS_MAX_FLASH_SECT	4 + 255  /* max number of sectors on one chip   */
 
 /* timeout values are in ticks */
-#define CFG_FLASH_ERASE_TOUT	(25*CFG_HZ) /* Timeout for Flash Erase */
-#define CFG_FLASH_WRITE_TOUT	(25*CFG_HZ) /* Timeout for Flash Write */
+#define CONFIG_SYS_FLASH_ERASE_TOUT	(25*CONFIG_SYS_HZ) /* Timeout for Flash Erase */
+#define CONFIG_SYS_FLASH_WRITE_TOUT	(25*CONFIG_SYS_HZ) /* Timeout for Flash Write */
 
 /* write flash less slowly */
-#define CFG_FLASH_USE_BUFFER_WRITE 1
+#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1
 
 /* Flash environment locations */
-#define CFG_ENV_IS_IN_FLASH	1
-#define CFG_ENV_ADDR		(PHYS_FLASH_1 + CFG_MONITOR_LEN) /* Addr of Environment Sector	*/
-#define CFG_ENV_SIZE		0x40000	/* Total Size of Environment		*/
-#define CFG_ENV_SECT_SIZE	0x40000	/* Total Size of Environment Sector	*/
+#define CONFIG_ENV_IS_IN_FLASH	1
+#define CONFIG_ENV_ADDR		(PHYS_FLASH_1 + CONFIG_SYS_MONITOR_LEN) /* Addr of Environment Sector	*/
+#define CONFIG_ENV_SIZE		0x40000	/* Total Size of Environment		*/
+#define CONFIG_ENV_SECT_SIZE	0x40000	/* Total Size of Environment Sector	*/
 
 /* Address and size of Redundant Environment Sector	*/
-#define CFG_ENV_ADDR_REDUND	(CFG_ENV_ADDR+CFG_ENV_SECT_SIZE)
-#define CFG_ENV_SIZE_REDUND	(CFG_ENV_SIZE)
+#define CONFIG_ENV_ADDR_REDUND	(CONFIG_ENV_ADDR+CONFIG_ENV_SECT_SIZE)
+#define CONFIG_ENV_SIZE_REDUND	(CONFIG_ENV_SIZE)
 
 #endif	/* __CONFIG_H */
diff --git a/include/configs/uc100.h b/include/configs/uc100.h
index 106e6f275..23f4c825b 100644
--- a/include/configs/uc100.h
+++ b/include/configs/uc100.h
@@ -92,7 +92,7 @@
 #define CONFIG_BOOTCOMMAND	"run flash_self"
 
 #define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
-#undef	CFG_LOADS_BAUD_CHANGE		/* don't allow baudrate change	*/
+#undef	CONFIG_SYS_LOADS_BAUD_CHANGE		/* don't allow baudrate change	*/
 
 #undef	CONFIG_WATCHDOG			/* watchdog disabled		*/
 
@@ -112,17 +112,17 @@
 #define CONFIG_DOS_PARTITION
 
 #undef CONFIG_RTC_MPC8xx
-#define CFG_I2C_RTC_ADDR	0x51	/* PCF8563 RTC			*/
+#define CONFIG_SYS_I2C_RTC_ADDR	0x51	/* PCF8563 RTC			*/
 #define CONFIG_RTC_PCF8563		/* use Philips PCF8563 RTC	*/
 
 /*
  * Power On Self Test support
  */
-#define CONFIG_POST	      ( CFG_POST_CACHE		| \
-				CFG_POST_MEMORY		| \
-				CFG_POST_CPU		| \
-				CFG_POST_UART		| \
-				CFG_POST_SPR )
+#define CONFIG_POST	      ( CONFIG_SYS_POST_CACHE		| \
+				CONFIG_SYS_POST_MEMORY		| \
+				CONFIG_SYS_POST_CPU		| \
+				CONFIG_SYS_POST_UART		| \
+				CONFIG_SYS_POST_SPR )
 #undef  CONFIG_POST
 
 
@@ -154,33 +154,33 @@
 /*
  * Miscellaneous configurable options
  */
-#define	CFG_LONGHELP			/* undef to save memory		*/
-#define	CFG_PROMPT		"=> "	/* Monitor Command Prompt	*/
+#define	CONFIG_SYS_LONGHELP			/* undef to save memory		*/
+#define	CONFIG_SYS_PROMPT		"=> "	/* Monitor Command Prompt	*/
 
 #if 0
-#define	CFG_HUSH_PARSER		1	/* use "hush" command parser	*/
+#define	CONFIG_SYS_HUSH_PARSER		1	/* use "hush" command parser	*/
 #endif
-#ifdef	CFG_HUSH_PARSER
-#define	CFG_PROMPT_HUSH_PS2	"> "
+#ifdef	CONFIG_SYS_HUSH_PARSER
+#define	CONFIG_SYS_PROMPT_HUSH_PS2	"> "
 #endif
 
 #if defined(CONFIG_CMD_KGDB)
-#define	CFG_CBSIZE		1024	/* Console I/O Buffer Size	*/
+#define	CONFIG_SYS_CBSIZE		1024	/* Console I/O Buffer Size	*/
 #else
-#define	CFG_CBSIZE		256	/* Console I/O Buffer Size	*/
+#define	CONFIG_SYS_CBSIZE		256	/* Console I/O Buffer Size	*/
 #endif
-#define	CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define	CFG_MAXARGS		16	/* max number of command args	*/
-#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+#define	CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define	CONFIG_SYS_MAXARGS		16	/* max number of command args	*/
+#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
 
-#define CFG_MEMTEST_START	0x0400000	/* memtest works on	*/
-#define CFG_MEMTEST_END		0x0C00000	/* 4 ... 12 MB in DRAM	*/
+#define CONFIG_SYS_MEMTEST_START	0x0400000	/* memtest works on	*/
+#define CONFIG_SYS_MEMTEST_END		0x0C00000	/* 4 ... 12 MB in DRAM	*/
 
-#define	CFG_LOAD_ADDR		0x100000	/* default load address	*/
+#define	CONFIG_SYS_LOAD_ADDR		0x100000	/* default load address	*/
 
-#define	CFG_HZ			1000	/* decrementer freq: 1 ms ticks	*/
+#define	CONFIG_SYS_HZ			1000	/* decrementer freq: 1 ms ticks	*/
 
-#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
 
 #define CONFIG_AUTO_COMPLETE	1       /* add autocompletion support   */
 
@@ -192,70 +192,70 @@
 /*-----------------------------------------------------------------------
  * Internal Memory Mapped Register
  */
-#define CFG_IMMR		0xF0000000
+#define CONFIG_SYS_IMMR		0xF0000000
 
 /*-----------------------------------------------------------------------
  * Definitions for initial stack pointer and data area (in DPRAM)
  */
-#define CFG_INIT_RAM_ADDR	CFG_IMMR
-#define	CFG_INIT_RAM_END	0x2F00	/* End of used area in DPRAM	*/
-#define	CFG_GBL_DATA_SIZE	64  /* size in bytes reserved for initial data */
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define	CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_IMMR
+#define	CONFIG_SYS_INIT_RAM_END	0x2F00	/* End of used area in DPRAM	*/
+#define	CONFIG_SYS_GBL_DATA_SIZE	64  /* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define	CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
 /*-----------------------------------------------------------------------
  * Start addresses for the final memory configuration
  * (Set up by the startup code)
- * Please note that CFG_SDRAM_BASE _must_ start at 0
+ * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
  */
-#define	CFG_SDRAM_BASE		0x00000000
-#define CFG_FLASH_BASE		0x40000000
-#define	CFG_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor	*/
-#define CFG_MONITOR_BASE	(CFG_FLASH_BASE+0x00700000) /* resetvec fff00100*/
-#define	CFG_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/
+#define	CONFIG_SYS_SDRAM_BASE		0x00000000
+#define CONFIG_SYS_FLASH_BASE		0x40000000
+#define	CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor	*/
+#define CONFIG_SYS_MONITOR_BASE	(CONFIG_SYS_FLASH_BASE+0x00700000) /* resetvec fff00100*/
+#define	CONFIG_SYS_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/
 
 /*-----------------------------------------------------------------------
  * Address accessed to reset the board - must not be mapped/assigned
  */
-#define CFG_RESET_ADDRESS       0x90000000
+#define CONFIG_SYS_RESET_ADDRESS       0x90000000
 
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define	CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux	*/
+#define	CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux	*/
 
 /*-----------------------------------------------------------------------
  * FLASH organization
  */
-#define CFG_FLASH_CFI				/* The flash is CFI compatible  */
+#define CONFIG_SYS_FLASH_CFI				/* The flash is CFI compatible  */
 #define CONFIG_FLASH_CFI_DRIVER			/* Use common CFI driver        */
-#define CFG_FLASH_CFI_AMD_RESET	1		/* AMD RESET for STM 29W320DB!  */
+#define CONFIG_SYS_FLASH_CFI_AMD_RESET	1		/* AMD RESET for STM 29W320DB!  */
 
-#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
-#define CFG_MAX_FLASH_SECT	256	/* max number of sectors on one chip	*/
+#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
+#define CONFIG_SYS_MAX_FLASH_SECT	256	/* max number of sectors on one chip	*/
 
-#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
-#define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
+#define CONFIG_SYS_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
+#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
 
-#define CFG_FLASH_EMPTY_INFO		/* print 'E' for empty sector on flinfo */
+#define CONFIG_SYS_FLASH_EMPTY_INFO		/* print 'E' for empty sector on flinfo */
 
-#define	CFG_ENV_IS_IN_FLASH	1
-#define CFG_ENV_ADDR		(CFG_MONITOR_BASE+CFG_MONITOR_LEN)
-#define CFG_ENV_SECT_SIZE	0x20000	/* size of one complete sector		*/
-#define	CFG_ENV_SIZE		0x4000	/* Total Size of Environment Sector	*/
+#define	CONFIG_ENV_IS_IN_FLASH	1
+#define CONFIG_ENV_ADDR		(CONFIG_SYS_MONITOR_BASE+CONFIG_SYS_MONITOR_LEN)
+#define CONFIG_ENV_SECT_SIZE	0x20000	/* size of one complete sector		*/
+#define	CONFIG_ENV_SIZE		0x4000	/* Total Size of Environment Sector	*/
 
 /* Address and size of Redundant Environment Sector	*/
-#define CFG_ENV_ADDR_REDUND	(CFG_ENV_ADDR+CFG_ENV_SECT_SIZE)
-#define CFG_ENV_SIZE_REDUND	(CFG_ENV_SIZE)
+#define CONFIG_ENV_ADDR_REDUND	(CONFIG_ENV_ADDR+CONFIG_ENV_SECT_SIZE)
+#define CONFIG_ENV_SIZE_REDUND	(CONFIG_ENV_SIZE)
 
 /*-----------------------------------------------------------------------
  * Cache Configuration
  */
-#define CFG_CACHELINE_SIZE	16	/* For all MPC8xx CPUs			*/
+#define CONFIG_SYS_CACHELINE_SIZE	16	/* For all MPC8xx CPUs			*/
 #if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT	4	/* log base 2 of the above value	*/
+#define CONFIG_SYS_CACHELINE_SHIFT	4	/* log base 2 of the above value	*/
 #endif
 
 /*-----------------------------------------------------------------------
@@ -265,10 +265,10 @@
  * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze
  */
 #if defined(CONFIG_WATCHDOG)
-#define CFG_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
+#define CONFIG_SYS_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
 			 SYPCR_SWE  | SYPCR_SWRI| SYPCR_SWP)
 #else
-#define CFG_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
+#define CONFIG_SYS_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
 #endif
 
 /*-----------------------------------------------------------------------
@@ -276,27 +276,27 @@
  *-----------------------------------------------------------------------
  * PCMCIA config., multi-function pin tri-state
  */
-#define CFG_SIUMCR	(SIUMCR_FRC | SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_MLRC01)
+#define CONFIG_SYS_SIUMCR	(SIUMCR_FRC | SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_MLRC01)
 
 /*-----------------------------------------------------------------------
  * TBSCR - Time Base Status and Control				11-26
  *-----------------------------------------------------------------------
  * Clear Reference Interrupt Status, Timebase freezing enabled
  */
-#define CFG_TBSCR	(TBSCR_REFA | TBSCR_REFB | TBSCR_TBF)
+#define CONFIG_SYS_TBSCR	(TBSCR_REFA | TBSCR_REFB | TBSCR_TBF)
 
 /*-----------------------------------------------------------------------
  * RTCSC - Real-Time Clock Status and Control Register		11-27
  *-----------------------------------------------------------------------
  */
-#define CFG_RTCSC	(RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE)
+#define CONFIG_SYS_RTCSC	(RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE)
 
 /*-----------------------------------------------------------------------
  * PISCR - Periodic Interrupt Status and Control		11-31
  *-----------------------------------------------------------------------
  * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
  */
-#define CFG_PISCR	(PISCR_PS | PISCR_PITF)
+#define CONFIG_SYS_PISCR	(PISCR_PS | PISCR_PITF)
 
 /*-----------------------------------------------------------------------
  * PLPRCR - PLL, Low-Power, and Reset Control Register		15-30
@@ -304,7 +304,7 @@
  * Reset PLL lock status sticky bit, timer expired status bit and timer
  * interrupt status bit
  */
-#define CFG_PLPRCR	(((MPC8XX_FACT-1) << PLPRCR_MF_SHIFT) |	\
+#define CONFIG_SYS_PLPRCR	(((MPC8XX_FACT-1) << PLPRCR_MF_SHIFT) |	\
 				PLPRCR_SPLSS | PLPRCR_TEXPS | PLPRCR_TMIST)
 
 /*-----------------------------------------------------------------------
@@ -314,21 +314,21 @@
  * power management and some other internal clocks
  */
 #define SCCR_MASK	0x00000000
-#define CFG_SCCR        (SCCR_EBDF11)
+#define CONFIG_SYS_SCCR        (SCCR_EBDF11)
 
 /*-----------------------------------------------------------------------
  * PCMCIA stuff
  *-----------------------------------------------------------------------
  *
  */
-#define CFG_PCMCIA_MEM_ADDR	(0xE0000000)
-#define CFG_PCMCIA_MEM_SIZE	( 64 << 20 )
-#define CFG_PCMCIA_DMA_ADDR	(0xE4000000)
-#define CFG_PCMCIA_DMA_SIZE	( 64 << 20 )
-#define CFG_PCMCIA_ATTRB_ADDR	(0xE8000000)
-#define CFG_PCMCIA_ATTRB_SIZE	( 64 << 20 )
-#define CFG_PCMCIA_IO_ADDR	(0xEC000000)
-#define CFG_PCMCIA_IO_SIZE	( 64 << 20 )
+#define CONFIG_SYS_PCMCIA_MEM_ADDR	(0xE0000000)
+#define CONFIG_SYS_PCMCIA_MEM_SIZE	( 64 << 20 )
+#define CONFIG_SYS_PCMCIA_DMA_ADDR	(0xE4000000)
+#define CONFIG_SYS_PCMCIA_DMA_SIZE	( 64 << 20 )
+#define CONFIG_SYS_PCMCIA_ATTRB_ADDR	(0xE8000000)
+#define CONFIG_SYS_PCMCIA_ATTRB_SIZE	( 64 << 20 )
+#define CONFIG_SYS_PCMCIA_IO_ADDR	(0xEC000000)
+#define CONFIG_SYS_PCMCIA_IO_SIZE	( 64 << 20 )
 
 /*-----------------------------------------------------------------------
  * IDE/ATA stuff (Supports IDE harddisk on PCMCIA Adapter)
@@ -341,28 +341,28 @@
 #undef	CONFIG_IDE_LED			/* LED   for ide not supported	*/
 #undef	CONFIG_IDE_RESET		/* reset for ide not supported	*/
 
-#define CFG_IDE_MAXBUS		1	/* max. 1 IDE bus		*/
-#define CFG_IDE_MAXDEVICE	1	/* max. 1 drive per IDE bus	*/
+#define CONFIG_SYS_IDE_MAXBUS		1	/* max. 1 IDE bus		*/
+#define CONFIG_SYS_IDE_MAXDEVICE	1	/* max. 1 drive per IDE bus	*/
 
-#define CFG_ATA_IDE0_OFFSET	0x0000
+#define CONFIG_SYS_ATA_IDE0_OFFSET	0x0000
 
-#define CFG_ATA_BASE_ADDR	CFG_PCMCIA_MEM_ADDR
+#define CONFIG_SYS_ATA_BASE_ADDR	CONFIG_SYS_PCMCIA_MEM_ADDR
 
 /* Offset for data I/O			*/
-#define CFG_ATA_DATA_OFFSET	(CFG_PCMCIA_MEM_SIZE + 0x320)
+#define CONFIG_SYS_ATA_DATA_OFFSET	(CONFIG_SYS_PCMCIA_MEM_SIZE + 0x320)
 
 /* Offset for normal register accesses	*/
-#define CFG_ATA_REG_OFFSET	(2 * CFG_PCMCIA_MEM_SIZE + 0x320)
+#define CONFIG_SYS_ATA_REG_OFFSET	(2 * CONFIG_SYS_PCMCIA_MEM_SIZE + 0x320)
 
 /* Offset for alternate registers	*/
-#define CFG_ATA_ALT_OFFSET	0x0100
+#define CONFIG_SYS_ATA_ALT_OFFSET	0x0100
 
 /*-----------------------------------------------------------------------
  *
  *-----------------------------------------------------------------------
  *
  */
-#define CFG_DER	0
+#define CONFIG_SYS_DER	0
 
 /*
  * Init Memory Controller:
@@ -377,28 +377,28 @@
  * restrict access enough to keep SRAM working (if any)
  * but not too much to meddle with FLASH accesses
  */
-#define CFG_REMAP_OR_AM		0x80000000	/* OR addr mask */
-#define CFG_PRELIM_OR_AM	0xFF800000	/* OR addr mask */
+#define CONFIG_SYS_REMAP_OR_AM		0x80000000	/* OR addr mask */
+#define CONFIG_SYS_PRELIM_OR_AM	0xFF800000	/* OR addr mask */
 
 /*
  * FLASH timing:
  */
-#define CFG_OR_TIMING_FLASH	(0x00000d24)
+#define CONFIG_SYS_OR_TIMING_FLASH	(0x00000d24)
 
-#define CFG_OR0_REMAP	(CFG_REMAP_OR_AM  | CFG_OR_TIMING_FLASH)
-#define CFG_OR0_PRELIM	(CFG_PRELIM_OR_AM | CFG_OR_TIMING_FLASH)
-#define CFG_BR0_PRELIM	((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_V )
+#define CONFIG_SYS_OR0_REMAP	(CONFIG_SYS_REMAP_OR_AM  | CONFIG_SYS_OR_TIMING_FLASH)
+#define CONFIG_SYS_OR0_PRELIM	(CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_FLASH)
+#define CONFIG_SYS_BR0_PRELIM	((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_V )
 
-#define CFG_BR1_PRELIM  0x00000081  /* Chip select for SDRAM (32 Bit, UPMA) */
-#define CFG_OR1_PRELIM  0xfc000a00
-#define CFG_BR2_PRELIM  0x80000001  /* Chip select for SRAM (32 Bit, GPCM) */
-#define CFG_OR2_PRELIM  0xfff00d24
-#define CFG_BR3_PRELIM  0x80600401  /* Chip select for Display (8 Bit, GPCM) */
-#define CFG_OR3_PRELIM  0xffff8f44
-#define CFG_BR4_PRELIM  0xc05108c1  /* Chip select for Interbus MPM (16 Bit, UPMB) */
-#define CFG_OR4_PRELIM  0xffff0300
-#define CFG_BR5_PRELIM  0xc0500401  /* Chip select for Interbus Status (8 Bit, GPCM) */
-#define CFG_OR5_PRELIM  0xffff8db0
+#define CONFIG_SYS_BR1_PRELIM  0x00000081  /* Chip select for SDRAM (32 Bit, UPMA) */
+#define CONFIG_SYS_OR1_PRELIM  0xfc000a00
+#define CONFIG_SYS_BR2_PRELIM  0x80000001  /* Chip select for SRAM (32 Bit, GPCM) */
+#define CONFIG_SYS_OR2_PRELIM  0xfff00d24
+#define CONFIG_SYS_BR3_PRELIM  0x80600401  /* Chip select for Display (8 Bit, GPCM) */
+#define CONFIG_SYS_OR3_PRELIM  0xffff8f44
+#define CONFIG_SYS_BR4_PRELIM  0xc05108c1  /* Chip select for Interbus MPM (16 Bit, UPMB) */
+#define CONFIG_SYS_OR4_PRELIM  0xffff0300
+#define CONFIG_SYS_BR5_PRELIM  0xc0500401  /* Chip select for Interbus Status (8 Bit, GPCM) */
+#define CONFIG_SYS_OR5_PRELIM  0xffff8db0
 
 /*
  * Memory Periodic Timer Prescaler
@@ -428,39 +428,39 @@
  * 100 Mhz => 100.000.000 / Divider = 195
  */
 
-#define CFG_PTA_PER_CLK	((4096 * 32 * 1000) / (4 * 64))
-#define CFG_MAMR_PTA	98
+#define CONFIG_SYS_PTA_PER_CLK	((4096 * 32 * 1000) / (4 * 64))
+#define CONFIG_SYS_MAMR_PTA	98
 
 /*
  * For 16 MBit, refresh rates could be 31.3 us
  * (= 64 ms / 2K = 125 / quad bursts).
  * For a simpler initialization, 15.6 us is used instead.
  *
- * #define CFG_MPTPR_2BK_2K	MPTPR_PTP_DIV32		for 2 banks
- * #define CFG_MPTPR_1BK_2K	MPTPR_PTP_DIV64		for 1 bank
+ * #define CONFIG_SYS_MPTPR_2BK_2K	MPTPR_PTP_DIV32		for 2 banks
+ * #define CONFIG_SYS_MPTPR_1BK_2K	MPTPR_PTP_DIV64		for 1 bank
  */
-#define CFG_MPTPR_2BK_4K	MPTPR_PTP_DIV16		/* setting for 2 banks	*/
-#define CFG_MPTPR_1BK_4K	MPTPR_PTP_DIV32		/* setting for 1 bank	*/
+#define CONFIG_SYS_MPTPR_2BK_4K	MPTPR_PTP_DIV16		/* setting for 2 banks	*/
+#define CONFIG_SYS_MPTPR_1BK_4K	MPTPR_PTP_DIV32		/* setting for 1 bank	*/
 
 /* refresh rate 7.8 us (= 64 ms / 8K = 31.2 / quad bursts) for 256 MBit		*/
-#define CFG_MPTPR_2BK_8K	MPTPR_PTP_DIV8		/* setting for 2 banks	*/
-#define CFG_MPTPR_1BK_8K	MPTPR_PTP_DIV16		/* setting for 1 bank	*/
+#define CONFIG_SYS_MPTPR_2BK_8K	MPTPR_PTP_DIV8		/* setting for 2 banks	*/
+#define CONFIG_SYS_MPTPR_1BK_8K	MPTPR_PTP_DIV16		/* setting for 1 bank	*/
 
 /*
  * MAMR settings for SDRAM
  */
 
 /* 8 column SDRAM */
-#define CFG_MAMR_8COL	((CFG_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
+#define CONFIG_SYS_MAMR_8COL	((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
 			 MAMR_AMA_TYPE_0 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A11 |	\
 			 MAMR_RLFA_1X	 | MAMR_WLFA_1X	   | MAMR_TLFA_4X)
 /* 9 column SDRAM */
-#define CFG_MAMR_9COL	((CFG_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
+#define CONFIG_SYS_MAMR_9COL	((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
 			 MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 |	\
 			 MAMR_RLFA_1X	 | MAMR_WLFA_1X	   | MAMR_TLFA_4X)
 
-#define	CFG_MAMR_VAL	0x30904114	/* for SDRAM */
-#define	CFG_MBMR_VAL	0xff001111	/* for Interbus-MPM */
+#define	CONFIG_SYS_MAMR_VAL	0x30904114	/* for SDRAM */
+#define	CONFIG_SYS_MBMR_VAL	0xff001111	/* for Interbus-MPM */
 
 /*-----------------------------------------------------------------------
  * I2C stuff
@@ -470,8 +470,8 @@
 #undef	CONFIG_HARD_I2C			/* I2C with hardware support	*/
 #define	CONFIG_SOFT_I2C         1	/* I2C bit-banged		*/
 
-#define CFG_I2C_SPEED		93000	/* 93 kHz is supposed to work	*/
-#define CFG_I2C_SLAVE		0xFE
+#define CONFIG_SYS_I2C_SPEED		93000	/* 93 kHz is supposed to work	*/
+#define CONFIG_SYS_I2C_SLAVE		0xFE
 
 #ifdef CONFIG_SOFT_I2C
 /*
@@ -494,10 +494,10 @@
 /*-----------------------------------------------------------------------
  * I2C EEPROM (24C164)
  */
-#define CFG_I2C_EEPROM_ADDR	0x58	/* EEPROM AT24C164		*/
-#define CFG_I2C_EEPROM_ADDR_LEN	1
-#define CFG_EEPROM_PAGE_WRITE_DELAY_MS	10	/* takes up to 10 msec	*/
-#define CFG_EEPROM_PAGE_WRITE_BITS	4
+#define CONFIG_SYS_I2C_EEPROM_ADDR	0x58	/* EEPROM AT24C164		*/
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN	1
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	10	/* takes up to 10 msec	*/
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS	4
 
 /*
  * Internal Definitions
@@ -511,6 +511,6 @@
 #define FEC_ENET
 #define CONFIG_MII
 #define CONFIG_MII_INIT		1
-#define CFG_DISCOVER_PHY	1
+#define CONFIG_SYS_DISCOVER_PHY	1
 
 #endif	/* __CONFIG_H */
diff --git a/include/configs/uc101.h b/include/configs/uc101.h
index a18618893..553eb25fb 100644
--- a/include/configs/uc101.h
+++ b/include/configs/uc101.h
@@ -33,7 +33,7 @@
 #define CONFIG_MPC5200		1	/* (more precisely an MPC5200 CPU)	*/
 #define CONFIG_UC101		1	/* UC101 board			*/
 
-#define CFG_MPC5XXX_CLKIN	33000000 /* ... running at 33.000000MHz		*/
+#define CONFIG_SYS_MPC5XXX_CLKIN	33000000 /* ... running at 33.000000MHz		*/
 
 #define BOOTFLAG_COLD		0x01	/* Normal Power-On: Boot from FLASH	*/
 #define BOOTFLAG_WARM		0x02	/* Software reboot			*/
@@ -47,7 +47,7 @@
  */
 #define CONFIG_PSC_CONSOLE	1	/* console is on PSC1	*/
 #define CONFIG_BAUDRATE		115200	/* ... at 115200 bps	*/
-#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
 
 /* Partitions */
 #define CONFIG_DOS_PARTITION
@@ -84,7 +84,7 @@
 #define	CONFIG_TIMESTAMP	1	/* Print image info with timestamp */
 
 #if (TEXT_BASE == 0xFFF00000) /* Boot low */
-#   define CFG_LOWBOOT		1
+#   define CONFIG_SYS_LOWBOOT		1
 #endif
 
 /*
@@ -120,79 +120,77 @@
 /*
  * IPB Bus clocking configuration.
  */
-#define CFG_IPBCLK_EQUALS_XLBCLK		/* define for 133MHz speed */
+#define CONFIG_SYS_IPBCLK_EQUALS_XLBCLK		/* define for 133MHz speed */
 
 /*
  * I2C configuration
  */
 #define CONFIG_HARD_I2C		1	/* I2C with hardware support */
-#define CFG_I2C_MODULE		2	/* Select I2C module #1 or #2 */
+#define CONFIG_SYS_I2C_MODULE		2	/* Select I2C module #1 or #2 */
 
-#define CFG_I2C_SPEED		100000 /* 100 kHz */
-#define CFG_I2C_SLAVE		0x7F
+#define CONFIG_SYS_I2C_SPEED		100000 /* 100 kHz */
+#define CONFIG_SYS_I2C_SLAVE		0x7F
 
 /*
  * EEPROM configuration
  */
-#define CFG_I2C_EEPROM_ADDR		0x58
-#define CFG_I2C_EEPROM_ADDR_LEN		1
-#define CFG_EEPROM_PAGE_WRITE_BITS	4
-#define CFG_EEPROM_PAGE_WRITE_DELAY_MS	10
-/* for LM81 */
-#define CFG_EEPROM_PAGE_WRITE_ENABLE
+#define CONFIG_SYS_I2C_EEPROM_ADDR		0x58
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN		1
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS	4
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	10
 
 /*
  * RTC configuration
  */
 #define CONFIG_RTC_PCF8563
-#define CFG_I2C_RTC_ADDR		0x51
+#define CONFIG_SYS_I2C_RTC_ADDR		0x51
 
 /* I2C SYSMON (LM75) */
 #define CONFIG_DTT_LM81			1	/* ON Semi's LM75		*/
 #define CONFIG_DTT_SENSORS		{0}	/* Sensor addresses		*/
-#define CFG_DTT_MAX_TEMP		70
-#define CFG_DTT_LOW_TEMP		-30
-#define CFG_DTT_HYSTERESIS		3
+#define CONFIG_SYS_DTT_MAX_TEMP		70
+#define CONFIG_SYS_DTT_LOW_TEMP		-30
+#define CONFIG_SYS_DTT_HYSTERESIS		3
 
 /*
  * Flash configuration
  */
-#define CFG_FLASH_BASE		0xFF800000
+#define CONFIG_SYS_FLASH_BASE		0xFF800000
 
-#define CFG_FLASH_SIZE		0x00800000 /* 8 MByte */
-#define CFG_MAX_FLASH_SECT	140	/* max num of sects on one chip */
+#define CONFIG_SYS_FLASH_SIZE		0x00800000 /* 8 MByte */
+#define CONFIG_SYS_MAX_FLASH_SECT	140	/* max num of sects on one chip */
 
-#define CFG_ENV_ADDR		(TEXT_BASE+0x40000) /* second sector */
-#define CFG_MAX_FLASH_BANKS	1	/* max num of flash banks
+#define CONFIG_ENV_ADDR		(TEXT_BASE+0x40000) /* second sector */
+#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max num of flash banks
 					   (= chip selects) */
-#define CFG_FLASH_ERASE_TOUT	240000	/* Flash Erase Timeout (in ms)	*/
-#define CFG_FLASH_WRITE_TOUT	500	/* Flash Write Timeout (in ms)	*/
+#define CONFIG_SYS_FLASH_ERASE_TOUT	240000	/* Flash Erase Timeout (in ms)	*/
+#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Flash Write Timeout (in ms)	*/
 
 #define CONFIG_FLASH_CFI_DRIVER
-#define CFG_FLASH_CFI
-#define CFG_FLASH_EMPTY_INFO
-#define CFG_FLASH_CFI_AMD_RESET
+#define CONFIG_SYS_FLASH_CFI
+#define CONFIG_SYS_FLASH_EMPTY_INFO
+#define CONFIG_SYS_FLASH_CFI_AMD_RESET
 
 /*
  * Environment settings
  */
-#define CFG_ENV_IS_IN_FLASH	1
-#define CFG_ENV_SIZE		0x4000
-#define CFG_ENV_SECT_SIZE	0x10000
-#define CFG_ENV_OFFSET_REDUND   (CFG_ENV_OFFSET+CFG_ENV_SECT_SIZE)
-#define CFG_ENV_SIZE_REDUND     (CFG_ENV_SIZE)
+#define CONFIG_ENV_IS_IN_FLASH	1
+#define CONFIG_ENV_SIZE		0x4000
+#define CONFIG_ENV_SECT_SIZE	0x10000
+#define CONFIG_ENV_OFFSET_REDUND   (CONFIG_ENV_OFFSET+CONFIG_ENV_SECT_SIZE)
+#define CONFIG_ENV_SIZE_REDUND     (CONFIG_ENV_SIZE)
 
 /*
  * Memory map
  */
-#define CFG_MBAR		0xF0000000
-#define CFG_DEFAULT_MBAR	0x80000000
+#define CONFIG_SYS_MBAR		0xF0000000
+#define CONFIG_SYS_DEFAULT_MBAR	0x80000000
 
-#define CFG_SDRAM_BASE		0x00000000
-#define CFG_SRAM_BASE		0x80100000	/* CS 1 */
-#define CFG_DISPLAY_BASE	0x80600000	/* CS 3 */
-#define	CFG_IB_MASTER		0xc0510000	/* CS 6 */
-#define CFG_IB_EPLD		0xc0500000	/* CS 7 */
+#define CONFIG_SYS_SDRAM_BASE		0x00000000
+#define CONFIG_SYS_SRAM_BASE		0x80100000	/* CS 1 */
+#define CONFIG_SYS_DISPLAY_BASE	0x80600000	/* CS 3 */
+#define	CONFIG_SYS_IB_MASTER		0xc0510000	/* CS 6 */
+#define CONFIG_SYS_IB_EPLD		0xc0500000	/* CS 7 */
 
 /* Settings for XLB = 132 MHz */
 #define SDRAM_DDR	 1
@@ -204,32 +202,32 @@
 #define SDRAM_TAPDELAY  0x10000000
 
 /* SRAM */
-#define SRAM_BASE		CFG_SRAM_BASE	/* SRAM base address	*/
+#define SRAM_BASE		CONFIG_SYS_SRAM_BASE	/* SRAM base address	*/
 #define SRAM_LEN		0x1fffff
 #define SRAM_END		(SRAM_BASE + SRAM_LEN)
 
 /* Use ON-Chip SRAM until RAM will be available */
-#define CFG_INIT_RAM_ADDR	MPC5XXX_SRAM
+#define CONFIG_SYS_INIT_RAM_ADDR	MPC5XXX_SRAM
 #ifdef CONFIG_POST
 /* preserve space for the post_word at end of on-chip SRAM */
-#define CFG_INIT_RAM_END	MPC5XXX_SRAM_POST_SIZE
+#define CONFIG_SYS_INIT_RAM_END	MPC5XXX_SRAM_POST_SIZE
 #else
-#define CFG_INIT_RAM_END	MPC5XXX_SRAM_SIZE
+#define CONFIG_SYS_INIT_RAM_END	MPC5XXX_SRAM_SIZE
 #endif
 
 
-#define CFG_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
-#define CFG_MONITOR_BASE    TEXT_BASE
-#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
-#   define CFG_RAMBOOT		1
+#define CONFIG_SYS_MONITOR_BASE    TEXT_BASE
+#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
+#   define CONFIG_SYS_RAMBOOT		1
 #endif
 
-#define CFG_MONITOR_LEN		(192 << 10)	/* Reserve 192 kB for Monitor	*/
-#define CFG_MALLOC_LEN		(512 << 10)	/* Reserve 128 kB for malloc()	*/
-#define CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
+#define CONFIG_SYS_MONITOR_LEN		(192 << 10)	/* Reserve 192 kB for Monitor	*/
+#define CONFIG_SYS_MALLOC_LEN		(512 << 10)	/* Reserve 128 kB for malloc()	*/
+#define CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
 
 /*
  * Ethernet configuration
@@ -241,7 +239,7 @@
 /*
  * GPIO configuration
  */
-#define CFG_GPS_PORT_CONFIG	0x4d558044
+#define CONFIG_SYS_GPS_PORT_CONFIG	0x4d558044
 
 /*use  Hardware WDT */
 #define CONFIG_HW_WATCHDOG
@@ -249,30 +247,30 @@
 /*
  * Miscellaneous configurable options
  */
-#define CFG_LONGHELP			/* undef to save memory	    */
-#define CFG_PROMPT		"=> "	/* Monitor Command Prompt   */
+#define CONFIG_SYS_LONGHELP			/* undef to save memory	    */
+#define CONFIG_SYS_PROMPT		"=> "	/* Monitor Command Prompt   */
 #if defined(CONFIG_CMD_KGDB)
-#define CFG_CBSIZE		1024	/* Console I/O Buffer Size  */
+#define CONFIG_SYS_CBSIZE		1024	/* Console I/O Buffer Size  */
 #else
-#define CFG_CBSIZE		256	/* Console I/O Buffer Size  */
+#define CONFIG_SYS_CBSIZE		256	/* Console I/O Buffer Size  */
 #endif
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define CFG_MAXARGS		16	/* max number of command args	*/
-#define CFG_BARGSIZE		CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS		16	/* max number of command args	*/
+#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
 
 /* Enable an alternate, more extensive memory test */
-#define CFG_ALT_MEMTEST
+#define CONFIG_SYS_ALT_MEMTEST
 
-#define CFG_MEMTEST_START	0x00300000	/* memtest works on */
-#define CFG_MEMTEST_END		0x00f00000	/* 3 ... 15 MB in DRAM	*/
+#define CONFIG_SYS_MEMTEST_START	0x00300000	/* memtest works on */
+#define CONFIG_SYS_MEMTEST_END		0x00f00000	/* 3 ... 15 MB in DRAM	*/
 
-#define CFG_LOAD_ADDR		0x300000	/* default load address */
+#define CONFIG_SYS_LOAD_ADDR		0x300000	/* default load address */
 
-#define CFG_HZ			1000	/* decrementer freq: 1 ms ticks */
+#define CONFIG_SYS_HZ			1000	/* decrementer freq: 1 ms ticks */
 
-#define CFG_CACHELINE_SIZE	32	/* For MPC5xxx CPUs			*/
+#define CONFIG_SYS_CACHELINE_SIZE	32	/* For MPC5xxx CPUs			*/
 #if defined(CONFIG_CMD_KGDB)
-#  define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value	*/
+#  define CONFIG_SYS_CACHELINE_SHIFT	5	/* log base 2 of the above value	*/
 #endif
 
 /*
@@ -284,41 +282,41 @@
  * Various low-level settings
  */
 #if defined(CONFIG_MPC5200)
-#define CFG_HID0_INIT		HID0_ICE | HID0_ICFI
-#define CFG_HID0_FINAL		HID0_ICE
+#define CONFIG_SYS_HID0_INIT		HID0_ICE | HID0_ICFI
+#define CONFIG_SYS_HID0_FINAL		HID0_ICE
 #else
-#define CFG_HID0_INIT		0
-#define CFG_HID0_FINAL		0
+#define CONFIG_SYS_HID0_INIT		0
+#define CONFIG_SYS_HID0_FINAL		0
 #endif
 
-#define CFG_BOOTCS_START	CFG_FLASH_BASE
-#define CFG_BOOTCS_SIZE		CFG_FLASH_SIZE
-#define CFG_BOOTCS_CFG		0x00045D00
-#define CFG_CS0_START		CFG_FLASH_BASE
-#define CFG_CS0_SIZE		CFG_FLASH_SIZE
+#define CONFIG_SYS_BOOTCS_START	CONFIG_SYS_FLASH_BASE
+#define CONFIG_SYS_BOOTCS_SIZE		CONFIG_SYS_FLASH_SIZE
+#define CONFIG_SYS_BOOTCS_CFG		0x00045D00
+#define CONFIG_SYS_CS0_START		CONFIG_SYS_FLASH_BASE
+#define CONFIG_SYS_CS0_SIZE		CONFIG_SYS_FLASH_SIZE
 
 /* 8Mbit SRAM @0x80100000 */
-#define CFG_CS1_START		CFG_SRAM_BASE
-#define CFG_CS1_SIZE		0x00200000
-#define CFG_CS1_CFG		0x21D00
+#define CONFIG_SYS_CS1_START		CONFIG_SYS_SRAM_BASE
+#define CONFIG_SYS_CS1_SIZE		0x00200000
+#define CONFIG_SYS_CS1_CFG		0x21D00
 
 /* Display H1, Status Inputs, EPLD @0x80600000 8 Bit */
-#define CFG_CS3_START		CFG_DISPLAY_BASE
-#define CFG_CS3_SIZE		0x00000100
-#define CFG_CS3_CFG		0x00081802
+#define CONFIG_SYS_CS3_START		CONFIG_SYS_DISPLAY_BASE
+#define CONFIG_SYS_CS3_SIZE		0x00000100
+#define CONFIG_SYS_CS3_CFG		0x00081802
 
 /* Interbus Master 16 Bit */
-#define CFG_CS6_START		CFG_IB_MASTER
-#define CFG_CS6_SIZE		0x00010000
-#define CFG_CS6_CFG		0x00FF3500
+#define CONFIG_SYS_CS6_START		CONFIG_SYS_IB_MASTER
+#define CONFIG_SYS_CS6_SIZE		0x00010000
+#define CONFIG_SYS_CS6_CFG		0x00FF3500
 
 /* Interbus EPLD 8 Bit */
-#define CFG_CS7_START		CFG_IB_EPLD
-#define CFG_CS7_SIZE		0x00010000
-#define CFG_CS7_CFG		0x00081800
+#define CONFIG_SYS_CS7_START		CONFIG_SYS_IB_EPLD
+#define CONFIG_SYS_CS7_SIZE		0x00010000
+#define CONFIG_SYS_CS7_CFG		0x00081800
 
-#define CFG_CS_BURST		0x00000000
-#define CFG_CS_DEADCYCLE	0x33333333
+#define CONFIG_SYS_CS_BURST		0x00000000
+#define CONFIG_SYS_CS_DEADCYCLE	0x33333333
 
 /*-----------------------------------------------------------------------
  * IDE/ATA stuff Supports IDE harddisk
@@ -330,33 +328,33 @@
 #undef	CONFIG_IDE_8xx_DIRECT		/* Direct IDE    not supported	*/
 #undef	CONFIG_IDE_LED			/* LED   for ide not supported	*/
 
-#define CFG_IDE_MAXBUS		1	/* max. 1 IDE bus		*/
-#define CFG_IDE_MAXDEVICE	2	/* max. 2 drives per IDE bus	*/
+#define CONFIG_SYS_IDE_MAXBUS		1	/* max. 1 IDE bus		*/
+#define CONFIG_SYS_IDE_MAXDEVICE	2	/* max. 2 drives per IDE bus	*/
 
 #define CONFIG_IDE_PREINIT	1
 
-#define CFG_ATA_IDE0_OFFSET	0x0000
+#define CONFIG_SYS_ATA_IDE0_OFFSET	0x0000
 
-#define CFG_ATA_BASE_ADDR	MPC5XXX_ATA
+#define CONFIG_SYS_ATA_BASE_ADDR	MPC5XXX_ATA
 
 /* Offset for data I/O			*/
-#define CFG_ATA_DATA_OFFSET	(0x0060)
+#define CONFIG_SYS_ATA_DATA_OFFSET	(0x0060)
 
 /* Offset for normal register accesses	*/
-#define CFG_ATA_REG_OFFSET	(CFG_ATA_DATA_OFFSET)
+#define CONFIG_SYS_ATA_REG_OFFSET	(CONFIG_SYS_ATA_DATA_OFFSET)
 
 /* Offset for alternate registers	*/
-#define CFG_ATA_ALT_OFFSET	(0x005C)
+#define CONFIG_SYS_ATA_ALT_OFFSET	(0x005C)
 
 /* Interval between registers                                                */
-#define CFG_ATA_STRIDE          4
+#define CONFIG_SYS_ATA_STRIDE          4
 
 #define CONFIG_ATAPI            1
 
 /*---------------------------------------------------------------------*/
 /* Display addresses						       */
 /*---------------------------------------------------------------------*/
-#define CFG_DISP_CHR_RAM	(CFG_DISPLAY_BASE + 0x38)
-#define CFG_DISP_CWORD		(CFG_DISPLAY_BASE + 0x30)
+#define CONFIG_SYS_DISP_CHR_RAM	(CONFIG_SYS_DISPLAY_BASE + 0x38)
+#define CONFIG_SYS_DISP_CWORD		(CONFIG_SYS_DISPLAY_BASE + 0x30)
 
 #endif /* __CONFIG_H */
diff --git a/include/configs/utx8245.h b/include/configs/utx8245.h
index 1675ab752..6e9c27c1e 100644
--- a/include/configs/utx8245.h
+++ b/include/configs/utx8245.h
@@ -55,7 +55,7 @@
 
 #define CONFIG_CONS_INDEX	1
 #define CONFIG_BAUDRATE		57600
-#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
 
 #define CONFIG_BOOTDELAY	2
 #define CONFIG_AUTOBOOT_PROMPT	"autoboot in %d seconds\n", bootdelay
@@ -63,7 +63,7 @@
 #define CONFIG_BOOTARGS		"root=/dev/ram console=ttyS0,57600" /* RAMdisk */
 #define CONFIG_ETHADDR		00:AA:00:14:00:05	/* UTX5 */
 #define CONFIG_SERVERIP		10.8.17.105	/* Spree */
-#define CFG_TFTP_LOADADDR	10000
+#define CONFIG_SYS_TFTP_LOADADDR	10000
 
 #define CONFIG_EXTRA_ENV_SETTINGS \
 	"kernel_addr=FFA00000\0" \
@@ -121,16 +121,16 @@ protect on ${u-boot_startaddr} ${u-boot_endaddr}"
 /*
  * Miscellaneous configurable options
  */
-#define CFG_LONGHELP				/* undef to save memory		*/
-#define CFG_PROMPT	"=> "			/* Monitor Command Prompt	*/
-#define CFG_CBSIZE	256				/* Console I/O Buffer Size	*/
+#define CONFIG_SYS_LONGHELP				/* undef to save memory		*/
+#define CONFIG_SYS_PROMPT	"=> "			/* Monitor Command Prompt	*/
+#define CONFIG_SYS_CBSIZE	256				/* Console I/O Buffer Size	*/
 
 /* Print Buffer Size */
-#define CFG_PBSIZE	(CFG_CBSIZE + sizeof(CFG_PROMPT) + 16)
+#define CONFIG_SYS_PBSIZE	(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
 
-#define	CFG_MAXARGS	16		/* max number of command args	*/
-#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size	*/
-#define CFG_LOAD_ADDR	0x00100000	/* Default load address		*/
+#define	CONFIG_SYS_MAXARGS	16		/* max number of command args	*/
+#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
+#define CONFIG_SYS_LOAD_ADDR	0x00100000	/* Default load address		*/
 
 
 /*-----------------------------------------------------------------------
@@ -142,7 +142,7 @@ protect on ${u-boot_startaddr} ${u-boot_endaddr}"
 #define CONFIG_PCI_SCAN_SHOW
 #define CONFIG_NET_MULTI
 #define CONFIG_EEPRO100
-#define CFG_RX_ETH_BUFFER	8               /* use 8 rx buffer on eepro100  */
+#define CONFIG_SYS_RX_ETH_BUFFER	8               /* use 8 rx buffer on eepro100  */
 #define CONFIG_EEPRO100_SROM_WRITE
 
 #define PCI_ENET0_IOADDR	0xF0000000
@@ -161,61 +161,61 @@ protect on ${u-boot_startaddr} ${u-boot_endaddr}"
 /*-----------------------------------------------------------------------
  * Start addresses for the final memory configuration
  * (Set up by the startup code)
- * Please note that CFG_SDRAM_BASE _must_ start at 0
+ * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
  */
-#define CFG_SDRAM_BASE	    0x00000000
-#define CFG_MAX_RAM_SIZE    0x10000000	/* 256MB  */
-/*#define CFG_VERY_BIG_RAM	1 */
+#define CONFIG_SYS_SDRAM_BASE	    0x00000000
+#define CONFIG_SYS_MAX_RAM_SIZE    0x10000000	/* 256MB  */
+/*#define CONFIG_SYS_VERY_BIG_RAM	1 */
 
 /* FLASH_BASE is FF800000, with 4MB on RCS0, but the reset vector
  * is actually located at FFF00100.  Therefore, U-Boot is
  * physically located at 0xFFB0_0000, but is also mirrored at
  * 0xFFF0_0000.
  */
-#define CFG_RESET_ADDRESS   0xFFF00100
+#define CONFIG_SYS_RESET_ADDRESS   0xFFF00100
 
-#define CFG_EUMB_ADDR	    0xFC000000
+#define CONFIG_SYS_EUMB_ADDR	    0xFC000000
 
-#define CFG_MONITOR_BASE    TEXT_BASE
+#define CONFIG_SYS_MONITOR_BASE    TEXT_BASE
 
-#define CFG_MONITOR_LEN	    (256 << 10) /* Reserve 256 kB for Monitor	*/
-#define CFG_MALLOC_LEN	    (128 << 10) /* Reserve 128 kB for malloc()	*/
+#define CONFIG_SYS_MONITOR_LEN	    (256 << 10) /* Reserve 256 kB for Monitor	*/
+#define CONFIG_SYS_MALLOC_LEN	    (128 << 10) /* Reserve 128 kB for malloc()	*/
 
-/*#define CFG_DRAM_TEST		1 */
-#define CFG_MEMTEST_START   0x00003000	/* memtest works on	0...256 MB	*/
-#define CFG_MEMTEST_END	    0x0ff8ffa7	/* in SDRAM, skips exception */
+/*#define CONFIG_SYS_DRAM_TEST		1 */
+#define CONFIG_SYS_MEMTEST_START   0x00003000	/* memtest works on	0...256 MB	*/
+#define CONFIG_SYS_MEMTEST_END	    0x0ff8ffa7	/* in SDRAM, skips exception */
 										/* vectors and U-Boot */
 
 
 /*--------------------------------------------------------------------
  * Definitions for initial stack pointer and data area
  *------------------------------------------------------------------*/
-#define CFG_INIT_DATA_SIZE    128	/* Size in bytes reserved for */
+#define CONFIG_SYS_INIT_DATA_SIZE    128	/* Size in bytes reserved for */
 									/* initial data */
-#define CFG_INIT_RAM_ADDR     0x40000000
-#define CFG_INIT_RAM_END      0x1000
-#define CFG_INIT_DATA_OFFSET  (CFG_INIT_RAM_END - CFG_INIT_DATA_SIZE)
-#define CFG_GBL_DATA_SIZE	128
-#define CFG_GBL_DATA_OFFSET  (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_RAM_ADDR     0x40000000
+#define CONFIG_SYS_INIT_RAM_END      0x1000
+#define CONFIG_SYS_INIT_DATA_OFFSET  (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_INIT_DATA_SIZE)
+#define CONFIG_SYS_GBL_DATA_SIZE	128
+#define CONFIG_SYS_GBL_DATA_OFFSET  (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
 
 /*--------------------------------------------------------------------
  * NS16550 Configuration
  *------------------------------------------------------------------*/
-#define CFG_NS16550
-#define CFG_NS16550_SERIAL
+#define CONFIG_SYS_NS16550
+#define CONFIG_SYS_NS16550_SERIAL
 
-#define CFG_NS16550_REG_SIZE	1
+#define CONFIG_SYS_NS16550_REG_SIZE	1
 
 #if (CONFIG_CONS_INDEX == 1 || CONFIG_CONS_INDEX == 2)
-#	define CFG_NS16550_CLK		get_bus_freq(0)
+#	define CONFIG_SYS_NS16550_CLK		get_bus_freq(0)
 #else
-#	define CFG_NS16550_CLK 33000000
+#	define CONFIG_SYS_NS16550_CLK 33000000
 #endif
 
-#define CFG_NS16550_COM1	(CFG_EUMB_ADDR + 0x4500)
-#define CFG_NS16550_COM2	(CFG_EUMB_ADDR + 0x4600)
-#define CFG_NS16550_COM3	0xFF000000
-#define CFG_NS16550_COM4	0xFF000008
+#define CONFIG_SYS_NS16550_COM1	(CONFIG_SYS_EUMB_ADDR + 0x4500)
+#define CONFIG_SYS_NS16550_COM2	(CONFIG_SYS_EUMB_ADDR + 0x4600)
+#define CONFIG_SYS_NS16550_COM3	0xFF000000
+#define CONFIG_SYS_NS16550_COM4	0xFF000008
 
 /*--------------------------------------------------------------------
  * Low Level Configuration Settings
@@ -225,10 +225,10 @@ protect on ${u-boot_startaddr} ${u-boot_endaddr}"
  *------------------------------------------------------------------*/
 
 #define CONFIG_SYS_CLK_FREQ  33000000
-#define CFG_HZ				1000
+#define CONFIG_SYS_HZ				1000
 
-/*#define CFG_ETH_DEV_FN	     0x7800 */
-/*#define CFG_ETH_IOBASE	     0x00104000 */
+/*#define CONFIG_SYS_ETH_DEV_FN	     0x7800 */
+/*#define CONFIG_SYS_ETH_IOBASE	     0x00104000 */
 
 /*--------------------------------------------------------------------
  * I2C Configuration
@@ -236,13 +236,13 @@ protect on ${u-boot_startaddr} ${u-boot_endaddr}"
 #if 1
 #define CONFIG_HARD_I2C		1		/* To enable I2C support	*/
 #undef  CONFIG_SOFT_I2C				/* I2C bit-banged		*/
-#define CFG_I2C_SPEED		400000		/* I2C speed and slave address	*/
-#define CFG_I2C_SLAVE		0x7F
+#define CONFIG_SYS_I2C_SPEED		400000		/* I2C speed and slave address	*/
+#define CONFIG_SYS_I2C_SLAVE		0x7F
 #endif
 
 #define CONFIG_RTC_PCF8563	1		/* enable I2C support for */
 									/* Philips PCF8563 RTC */
-#define CFG_I2C_RTC_ADDR	0x51	/* Philips PCF8563 RTC address */
+#define CONFIG_SYS_I2C_RTC_ADDR	0x51	/* Philips PCF8563 RTC address */
 
 /*--------------------------------------------------------------------
  *	Memory Control Configuration Register values
@@ -250,59 +250,59 @@ protect on ${u-boot_startaddr} ${u-boot_endaddr}"
  *------------------------------------------------------------------*/
 
 /**** MCCR1 ****/
-#define CFG_ROMNAL	    0
-#define CFG_ROMFAL	    10		/* (tacc=70ns)*mem_freq - 2,
+#define CONFIG_SYS_ROMNAL	    0
+#define CONFIG_SYS_ROMFAL	    10		/* (tacc=70ns)*mem_freq - 2,
 									mem_freq = 100MHz */
 
-#define CFG_BANK7_ROW	0		/* SDRAM bank 7-0 row address */
-#define CFG_BANK6_ROW	0		/*	bit count */
-#define CFG_BANK5_ROW	0
-#define CFG_BANK4_ROW	0
-#define CFG_BANK3_ROW	0
-#define CFG_BANK2_ROW	0
-#define CFG_BANK1_ROW	2
-#define CFG_BANK0_ROW	2
+#define CONFIG_SYS_BANK7_ROW	0		/* SDRAM bank 7-0 row address */
+#define CONFIG_SYS_BANK6_ROW	0		/*	bit count */
+#define CONFIG_SYS_BANK5_ROW	0
+#define CONFIG_SYS_BANK4_ROW	0
+#define CONFIG_SYS_BANK3_ROW	0
+#define CONFIG_SYS_BANK2_ROW	0
+#define CONFIG_SYS_BANK1_ROW	2
+#define CONFIG_SYS_BANK0_ROW	2
 
 /**** MCCR2, refresh interval clock cycles ****/
-#define CFG_REFINT	    480	    /* 33 MHz SDRAM clock was 480 */
+#define CONFIG_SYS_REFINT	    480	    /* 33 MHz SDRAM clock was 480 */
 
 /* Burst To Precharge. Bits of this value go to MCCR3 and MCCR4. */
-#define CFG_BSTOPRE	    1023	/* burst to precharge[0..9], */
+#define CONFIG_SYS_BSTOPRE	    1023	/* burst to precharge[0..9], */
 								/* sets open page interval */
 
 /**** MCCR3 ****/
-#define CFG_REFREC	    7	    /* Refresh to activate interval, trc */
+#define CONFIG_SYS_REFREC	    7	    /* Refresh to activate interval, trc */
 
 /**** MCCR4 ****/
-#define CFG_PRETOACT	    2	    /* trp */
-#define CFG_ACTTOPRE	    7	    /* trcd + (burst length - 1) + trdl */
-#define CFG_SDMODE_CAS_LAT  3	    /* SDMODE CAS latancy */
-#define CFG_SDMODE_WRAP	    0	    /* SDMODE wrap type, sequential */
-#define CFG_ACTORW		2		/* trcd min */
-#define CFG_DBUS_SIZE2		1		/* set for 8-bit RCS1, clear for 32,64 */
-#define CFG_REGISTERD_TYPE_BUFFER 1
-#define CFG_EXTROM	    0			/* we don't need extended ROM space */
-#define CFG_REGDIMM	    0
+#define CONFIG_SYS_PRETOACT	    2	    /* trp */
+#define CONFIG_SYS_ACTTOPRE	    7	    /* trcd + (burst length - 1) + trdl */
+#define CONFIG_SYS_SDMODE_CAS_LAT  3	    /* SDMODE CAS latancy */
+#define CONFIG_SYS_SDMODE_WRAP	    0	    /* SDMODE wrap type, sequential */
+#define CONFIG_SYS_ACTORW		2		/* trcd min */
+#define CONFIG_SYS_DBUS_SIZE2		1		/* set for 8-bit RCS1, clear for 32,64 */
+#define CONFIG_SYS_REGISTERD_TYPE_BUFFER 1
+#define CONFIG_SYS_EXTROM	    0			/* we don't need extended ROM space */
+#define CONFIG_SYS_REGDIMM	    0
 
 /* calculate according to formula in sec. 6-22 of 8245 UM */
-#define CFG_PGMAX           50		/* how long the 8245 retains the */
+#define CONFIG_SYS_PGMAX           50		/* how long the 8245 retains the */
 									/* currently accessed page in memory */
 									/* was 45 */
 
-#define CFG_SDRAM_DSCD	0x20	/* SDRAM data in sample clock delay - note */
+#define CONFIG_SYS_SDRAM_DSCD	0x20	/* SDRAM data in sample clock delay - note */
 								/* bits 7,6, and 3-0 MUST be 0 */
 
 #if 0
-#define CFG_DLL_MAX_DELAY	0x04
+#define CONFIG_SYS_DLL_MAX_DELAY	0x04
 #else
-#define CFG_DLL_MAX_DELAY	0
+#define CONFIG_SYS_DLL_MAX_DELAY	0
 #endif
 #if 0							/* need for 33MHz SDRAM */
-#define CFG_DLL_EXTEND	0x80
+#define CONFIG_SYS_DLL_EXTEND	0x80
 #else
-#define CFG_DLL_EXTEND	0
+#define CONFIG_SYS_DLL_EXTEND	0
 #endif
-#define CFG_PCI_HOLD_DEL 0x20
+#define CONFIG_SYS_PCI_HOLD_DEL 0x20
 
 
 /* Memory bank settings.
@@ -312,117 +312,117 @@ protect on ${u-boot_startaddr} ${u-boot_endaddr}"
  * address. Refer to the MPC8245 user manual.
  */
 
-#define CFG_BANK0_START	    0x00000000
-#define CFG_BANK0_END	    (CFG_MAX_RAM_SIZE/2 - 1)
-#define CFG_BANK0_ENABLE    1
-#define CFG_BANK1_START	    CFG_MAX_RAM_SIZE/2
-#define CFG_BANK1_END	    (CFG_MAX_RAM_SIZE - 1)
-#define CFG_BANK1_ENABLE    1
-#define CFG_BANK2_START	    0x3ff00000		/* not available in this design */
-#define CFG_BANK2_END	    0x3fffffff
-#define CFG_BANK2_ENABLE    0
-#define CFG_BANK3_START	    0x3ff00000
-#define CFG_BANK3_END	    0x3fffffff
-#define CFG_BANK3_ENABLE    0
-#define CFG_BANK4_START	    0x3ff00000
-#define CFG_BANK4_END	    0x3fffffff
-#define CFG_BANK4_ENABLE    0
-#define CFG_BANK5_START	    0x3ff00000
-#define CFG_BANK5_END	    0x3fffffff
-#define CFG_BANK5_ENABLE    0
-#define CFG_BANK6_START	    0x3ff00000
-#define CFG_BANK6_END	    0x3fffffff
-#define CFG_BANK6_ENABLE    0
-#define CFG_BANK7_START	    0x3ff00000
-#define CFG_BANK7_END	    0x3fffffff
-#define CFG_BANK7_ENABLE    0
+#define CONFIG_SYS_BANK0_START	    0x00000000
+#define CONFIG_SYS_BANK0_END	    (CONFIG_SYS_MAX_RAM_SIZE/2 - 1)
+#define CONFIG_SYS_BANK0_ENABLE    1
+#define CONFIG_SYS_BANK1_START	    CONFIG_SYS_MAX_RAM_SIZE/2
+#define CONFIG_SYS_BANK1_END	    (CONFIG_SYS_MAX_RAM_SIZE - 1)
+#define CONFIG_SYS_BANK1_ENABLE    1
+#define CONFIG_SYS_BANK2_START	    0x3ff00000		/* not available in this design */
+#define CONFIG_SYS_BANK2_END	    0x3fffffff
+#define CONFIG_SYS_BANK2_ENABLE    0
+#define CONFIG_SYS_BANK3_START	    0x3ff00000
+#define CONFIG_SYS_BANK3_END	    0x3fffffff
+#define CONFIG_SYS_BANK3_ENABLE    0
+#define CONFIG_SYS_BANK4_START	    0x3ff00000
+#define CONFIG_SYS_BANK4_END	    0x3fffffff
+#define CONFIG_SYS_BANK4_ENABLE    0
+#define CONFIG_SYS_BANK5_START	    0x3ff00000
+#define CONFIG_SYS_BANK5_END	    0x3fffffff
+#define CONFIG_SYS_BANK5_ENABLE    0
+#define CONFIG_SYS_BANK6_START	    0x3ff00000
+#define CONFIG_SYS_BANK6_END	    0x3fffffff
+#define CONFIG_SYS_BANK6_ENABLE    0
+#define CONFIG_SYS_BANK7_START	    0x3ff00000
+#define CONFIG_SYS_BANK7_END	    0x3fffffff
+#define CONFIG_SYS_BANK7_ENABLE    0
 
 /*--------------------------------------------------------------------*/
 /* 4.4 - Output Driver Control Register */
 /*--------------------------------------------------------------------*/
-#define CFG_ODCR	    0xe5
+#define CONFIG_SYS_ODCR	    0xe5
 
 /*--------------------------------------------------------------------*/
 /* 4.8 - Error Handling Registers */
-/*-------------------------------CFG_SDMODE_BURSTLEN-------------------------------------*/
-#define CFG_ERRENR1	0x11	/* enable SDRAM refresh overflow error */
+/*-------------------------------CONFIG_SYS_SDMODE_BURSTLEN-------------------------------------*/
+#define CONFIG_SYS_ERRENR1	0x11	/* enable SDRAM refresh overflow error */
 
 /* SDRAM 0-256 MB */
-#define CFG_IBAT0L  (CFG_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
-/*#define CFG_IBAT0L  (CFG_SDRAM_BASE | BATL_PP_10 | BATL_CACHEINHIBIT) */
-#define CFG_IBAT0U  (CFG_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CONFIG_SYS_IBAT0L  (CONFIG_SYS_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
+/*#define CONFIG_SYS_IBAT0L  (CONFIG_SYS_SDRAM_BASE | BATL_PP_10 | BATL_CACHEINHIBIT) */
+#define CONFIG_SYS_IBAT0U  (CONFIG_SYS_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
 
 /* stack in dcache */
-#define CFG_IBAT1L  (CFG_INIT_RAM_ADDR | BATL_PP_10 | BATL_MEMCOHERENCE)
-#define CFG_IBAT1U  (CFG_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP)
+#define CONFIG_SYS_IBAT1L  (CONFIG_SYS_INIT_RAM_ADDR | BATL_PP_10 | BATL_MEMCOHERENCE)
+#define CONFIG_SYS_IBAT1U  (CONFIG_SYS_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP)
 
 
-#define CFG_IBAT2L  (CFG_SDRAM_BASE + 0x10000000 | BATL_PP_10 | BATL_MEMCOHERENCE)
-#define CFG_IBAT2U  (CFG_SDRAM_BASE + 0x10000000| BATU_BL_256M | BATU_VS | BATU_VP)
+#define CONFIG_SYS_IBAT2L  (CONFIG_SYS_SDRAM_BASE + 0x10000000 | BATL_PP_10 | BATL_MEMCOHERENCE)
+#define CONFIG_SYS_IBAT2U  (CONFIG_SYS_SDRAM_BASE + 0x10000000| BATU_BL_256M | BATU_VS | BATU_VP)
 
 /* PCI memory */
-/*#define CFG_IBAT2L  (0x80000000 | BATL_PP_10 | BATL_CACHEINHIBIT) */
-/*#define CFG_IBAT2U  (0x80000000 | BATU_BL_256M | BATU_VS | BATU_VP) */
+/*#define CONFIG_SYS_IBAT2L  (0x80000000 | BATL_PP_10 | BATL_CACHEINHIBIT) */
+/*#define CONFIG_SYS_IBAT2U  (0x80000000 | BATU_BL_256M | BATU_VS | BATU_VP) */
 
 /*Flash, config addrs, etc. */
-#define CFG_IBAT3L  (0xF0000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
-#define CFG_IBAT3U  (0xF0000000 | BATU_BL_256M | BATU_VS | BATU_VP)
-
-#define CFG_DBAT0L  CFG_IBAT0L
-#define CFG_DBAT0U  CFG_IBAT0U
-#define CFG_DBAT1L  CFG_IBAT1L
-#define CFG_DBAT1U  CFG_IBAT1U
-#define CFG_DBAT2L  CFG_IBAT2L
-#define CFG_DBAT2U  CFG_IBAT2U
-#define CFG_DBAT3L  CFG_IBAT3L
-#define CFG_DBAT3U  CFG_IBAT3U
+#define CONFIG_SYS_IBAT3L  (0xF0000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
+#define CONFIG_SYS_IBAT3U  (0xF0000000 | BATU_BL_256M | BATU_VS | BATU_VP)
+
+#define CONFIG_SYS_DBAT0L  CONFIG_SYS_IBAT0L
+#define CONFIG_SYS_DBAT0U  CONFIG_SYS_IBAT0U
+#define CONFIG_SYS_DBAT1L  CONFIG_SYS_IBAT1L
+#define CONFIG_SYS_DBAT1U  CONFIG_SYS_IBAT1U
+#define CONFIG_SYS_DBAT2L  CONFIG_SYS_IBAT2L
+#define CONFIG_SYS_DBAT2U  CONFIG_SYS_IBAT2U
+#define CONFIG_SYS_DBAT3L  CONFIG_SYS_IBAT3L
+#define CONFIG_SYS_DBAT3U  CONFIG_SYS_IBAT3U
 
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define CFG_BOOTMAPSZ	    (8 << 20)	/* Initial Memory map for Linux */
+#define CONFIG_SYS_BOOTMAPSZ	    (8 << 20)	/* Initial Memory map for Linux */
 
 /*-----------------------------------------------------------------------
  * FLASH organization
  *----------------------------------------------------------------------*/
-#define CFG_FLASH_BASE	    0xFF800000
-#define CFG_MAX_FLASH_BANKS	1			/* Max number of flash banks */
+#define CONFIG_SYS_FLASH_BASE	    0xFF800000
+#define CONFIG_SYS_MAX_FLASH_BANKS	1			/* Max number of flash banks */
 
 /*	NOTE: environment is not EMBEDDED in the u-boot code.
 	It's stored in flash in its own separate sector.  */
-#define CFG_ENV_IS_IN_FLASH	    1
+#define CONFIG_ENV_IS_IN_FLASH	    1
 
 #if 1	/* AMD AM29LV033C */
-#define CFG_MAX_FLASH_SECT	64		/* Max number of sectors in one bank */
-#define CFG_ENV_ADDR		0xFFBF0000	/* flash sector SA63 */
-#define CFG_ENV_SECT_SIZE	(64*1024)	/* Size of the Environment Sector */
+#define CONFIG_SYS_MAX_FLASH_SECT	64		/* Max number of sectors in one bank */
+#define CONFIG_ENV_ADDR		0xFFBF0000	/* flash sector SA63 */
+#define CONFIG_ENV_SECT_SIZE	(64*1024)	/* Size of the Environment Sector */
 #else	/* AMD AM29LV116D */
-#define CFG_MAX_FLASH_SECT	35	/* Max number of sectors in one bank */
-#define CFG_ENV_ADDR		0xFF9FA000	/* flash sector SA33 */
-#define CFG_ENV_SECT_SIZE	(8*1024)	/* Size of the Environment Sector */
+#define CONFIG_SYS_MAX_FLASH_SECT	35	/* Max number of sectors in one bank */
+#define CONFIG_ENV_ADDR		0xFF9FA000	/* flash sector SA33 */
+#define CONFIG_ENV_SECT_SIZE	(8*1024)	/* Size of the Environment Sector */
 #endif /* #if */
 
-#define CFG_ENV_SIZE		CFG_ENV_SECT_SIZE		/* Size of the Environment */
-#define CFG_ENV_OFFSET		0			/* starting right at the beginning */
+#define CONFIG_ENV_SIZE		CONFIG_ENV_SECT_SIZE		/* Size of the Environment */
+#define CONFIG_ENV_OFFSET		0			/* starting right at the beginning */
 
-#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
-#define CFG_FLASH_WRITE_TOUT	500		/* Timeout for Flash Write (in ms)	*/
+#define CONFIG_SYS_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
+#define CONFIG_SYS_FLASH_WRITE_TOUT	500		/* Timeout for Flash Write (in ms)	*/
 
-#if CFG_MONITOR_BASE >= CFG_FLASH_BASE
-#undef CFG_RAMBOOT
+#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE
+#undef CONFIG_SYS_RAMBOOT
 #else
-#define CFG_RAMBOOT
+#define CONFIG_SYS_RAMBOOT
 #endif
 
 
 /*-----------------------------------------------------------------------
  * Cache Configuration
  */
-#define CFG_CACHELINE_SIZE	32
+#define CONFIG_SYS_CACHELINE_SIZE	32
 #if defined(CONFIG_CMD_KGDB)
-#  define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value	*/
+#  define CONFIG_SYS_CACHELINE_SHIFT	5	/* log base 2 of the above value	*/
 #endif
 
 /*
diff --git a/include/configs/v37.h b/include/configs/v37.h
index 751d70213..a6b0f0daf 100644
--- a/include/configs/v37.h
+++ b/include/configs/v37.h
@@ -45,7 +45,7 @@
  *-----------------------------------------------------------------------------
  */
 #define CONFIG_I2C              1
-#define CFG_I2C_SLAVE           0x2
+#define CONFIG_SYS_I2C_SLAVE           0x2
 
 #define	CONFIG_8xx_CONS_SMC1	1
 #undef	CONFIG_8xx_CONS_SMC2		/* Console is on SMC2		*/
@@ -70,7 +70,7 @@
 	"bootm"
 
 #define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
-#undef	CFG_LOADS_BAUD_CHANGE		/* don't allow baudrate change	*/
+#undef	CONFIG_SYS_LOADS_BAUD_CHANGE		/* don't allow baudrate change	*/
 
 #undef	CONFIG_WATCHDOG			/* watchdog disabled		*/
 
@@ -122,25 +122,25 @@
 /*
  * Miscellaneous configurable options
  */
-#define	CFG_LONGHELP			/* undef to save memory		*/
-#define	CFG_PROMPT	"=> "		/* Monitor Command Prompt	*/
+#define	CONFIG_SYS_LONGHELP			/* undef to save memory		*/
+#define	CONFIG_SYS_PROMPT	"=> "		/* Monitor Command Prompt	*/
 #if defined(CONFIG_CMD_KGDB)
-#define	CFG_CBSIZE	1024		/* Console I/O Buffer Size	*/
+#define	CONFIG_SYS_CBSIZE	1024		/* Console I/O Buffer Size	*/
 #else
-#define	CFG_CBSIZE	256		/* Console I/O Buffer Size	*/
+#define	CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size	*/
 #endif
-#define	CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define	CFG_MAXARGS	16		/* max number of command args	*/
-#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+#define	CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define	CONFIG_SYS_MAXARGS	16		/* max number of command args	*/
+#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
 
-#define CFG_MEMTEST_START	0x0400000	/* memtest works on	*/
-#define CFG_MEMTEST_END		0x0C00000	/* 4 ... 12 MB in DRAM	*/
+#define CONFIG_SYS_MEMTEST_START	0x0400000	/* memtest works on	*/
+#define CONFIG_SYS_MEMTEST_END		0x0C00000	/* 4 ... 12 MB in DRAM	*/
 
-#define	CFG_LOAD_ADDR		0x100000	/* default load address	*/
+#define	CONFIG_SYS_LOAD_ADDR		0x100000	/* default load address	*/
 
-#define	CFG_HZ		1000		/* decrementer freq: 1 ms ticks	*/
+#define	CONFIG_SYS_HZ		1000		/* decrementer freq: 1 ms ticks	*/
 
-#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
 
 /*
  * Low Level Configuration Settings
@@ -150,63 +150,63 @@
 /*-----------------------------------------------------------------------
  * Internal Memory Mapped Register
  */
-#define CFG_IMMR		0xF0000000
+#define CONFIG_SYS_IMMR		0xF0000000
 
 /*-----------------------------------------------------------------------
  * Definitions for initial stack pointer and data area (in DPRAM)
  */
-#define CFG_INIT_RAM_ADDR	CFG_IMMR
-#define	CFG_INIT_RAM_END	0x2F00	/* End of used area in DPRAM	*/
-#define	CFG_GBL_DATA_SIZE	64  /* size in bytes reserved for initial data */
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define	CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_IMMR
+#define	CONFIG_SYS_INIT_RAM_END	0x2F00	/* End of used area in DPRAM	*/
+#define	CONFIG_SYS_GBL_DATA_SIZE	64  /* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define	CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
 /*-----------------------------------------------------------------------
  * Start addresses for the final memory configuration
  * (Set up by the startup code)
- * Please note that CFG_SDRAM_BASE _must_ start at 0
+ * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
  */
-#define	CFG_SDRAM_BASE		0x00000000
-#define CFG_FLASH_BASE0		0x40000000
-#define CFG_FLASH_BASE1		0x60000000
-#define CFG_FLASH_BASE		CFG_FLASH_BASE1
+#define	CONFIG_SYS_SDRAM_BASE		0x00000000
+#define CONFIG_SYS_FLASH_BASE0		0x40000000
+#define CONFIG_SYS_FLASH_BASE1		0x60000000
+#define CONFIG_SYS_FLASH_BASE		CONFIG_SYS_FLASH_BASE1
 
 #if defined(DEBUG)
-#define	CFG_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor	*/
+#define	CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor	*/
 #else
-#define	CFG_MONITOR_LEN		(192 << 10)	/* Reserve 192 kB for Monitor	*/
+#define	CONFIG_SYS_MONITOR_LEN		(192 << 10)	/* Reserve 192 kB for Monitor	*/
 #endif
-#define CFG_MONITOR_BASE	CFG_FLASH_BASE0
-#define	CFG_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/
+#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_FLASH_BASE0
+#define	CONFIG_SYS_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/
 
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define	CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux	*/
+#define	CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux	*/
 
 /*-----------------------------------------------------------------------
  * FLASH organization
  */
-#define CFG_MAX_FLASH_BANKS	2	/* max number of memory banks		*/
-#define CFG_MAX_FLASH_SECT	35	/* max number of sectors on one chip	*/
+#define CONFIG_SYS_MAX_FLASH_BANKS	2	/* max number of memory banks		*/
+#define CONFIG_SYS_MAX_FLASH_SECT	35	/* max number of sectors on one chip	*/
 
-#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
-#define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
+#define CONFIG_SYS_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
+#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
 
-#define	CFG_ENV_IS_IN_NVRAM	1
-#define	CFG_ENV_ADDR		0x80000000/* Address of Environment */
-#define	CFG_ENV_SIZE		0x4000	/* Total Size of Environment Sector	*/
+#define	CONFIG_ENV_IS_IN_NVRAM	1
+#define	CONFIG_ENV_ADDR		0x80000000/* Address of Environment */
+#define	CONFIG_ENV_SIZE		0x4000	/* Total Size of Environment Sector	*/
 
-#define CFG_ENV_OFFSET		0
+#define CONFIG_ENV_OFFSET		0
 
 /*-----------------------------------------------------------------------
  * Cache Configuration
  */
-#define CFG_CACHELINE_SIZE	16	/* For all MPC8xx CPUs			*/
+#define CONFIG_SYS_CACHELINE_SIZE	16	/* For all MPC8xx CPUs			*/
 #if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT	4	/* log base 2 of the above value	*/
+#define CONFIG_SYS_CACHELINE_SHIFT	4	/* log base 2 of the above value	*/
 #endif
 
 /*-----------------------------------------------------------------------
@@ -216,10 +216,10 @@
  * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze
  */
 #if defined(CONFIG_WATCHDOG)
-#define CFG_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
+#define CONFIG_SYS_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
 			 SYPCR_SWE  | SYPCR_SWRI| SYPCR_SWP)
 #else
-#define CFG_SYPCR	0xFFFFFF88
+#define CONFIG_SYS_SYPCR	0xFFFFFF88
 #endif
 
 /*-----------------------------------------------------------------------
@@ -227,30 +227,30 @@
  *-----------------------------------------------------------------------
  * PCMCIA config., multi-function pin tri-state
  */
-#define CFG_SIUMCR	(SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_FRC | SIUMCR_GB5E)
+#define CONFIG_SYS_SIUMCR	(SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_FRC | SIUMCR_GB5E)
 
 /*-----------------------------------------------------------------------
  * TBSCR - Time Base Status and Control				11-26
  *-----------------------------------------------------------------------
  * Clear Reference Interrupt Status, Timebase freezing enabled
  */
-#define CFG_TBSCR	(TBSCR_REFA | TBSCR_REFB | TBSCR_TBE)
+#define CONFIG_SYS_TBSCR	(TBSCR_REFA | TBSCR_REFB | TBSCR_TBE)
 
 /*-----------------------------------------------------------------------
  * RTCSC - Real-Time Clock Status and Control Register		11-27
  *-----------------------------------------------------------------------
  */
-/*%%%#define CFG_RTCSC	(RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE) */
-#define CFG_RTCSC	(RTCSC_SEC | RTCSC_RTE)
+/*%%%#define CONFIG_SYS_RTCSC	(RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE) */
+#define CONFIG_SYS_RTCSC	(RTCSC_SEC | RTCSC_RTE)
 
 /*-----------------------------------------------------------------------
  * PISCR - Periodic Interrupt Status and Control		11-31
  *-----------------------------------------------------------------------
  * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
  */
-#define CFG_PISCR (PISCR_PS | PISCR_PITF)
+#define CONFIG_SYS_PISCR (PISCR_PS | PISCR_PITF)
 /*
-#define CFG_PISCR (PISCR_PS | PISCR_PITF)
+#define CONFIG_SYS_PISCR (PISCR_PS | PISCR_PITF)
 */
 
 /*-----------------------------------------------------------------------
@@ -262,7 +262,7 @@
  * If this is a 80 MHz CPU, set PLL multiplication factor to 5 (5*16=80)!
  */
 /* up to 50 MHz we use a 1:1 clock */
-#define CFG_PLPRCR	( (1524 << PLPRCR_MF_SHIFT) | PLPRCR_SPLSS | PLPRCR_TMIST | PLPRCR_TEXPS )
+#define CONFIG_SYS_PLPRCR	( (1524 << PLPRCR_MF_SHIFT) | PLPRCR_SPLSS | PLPRCR_TMIST | PLPRCR_TEXPS )
 
 /*-----------------------------------------------------------------------
  * SCCR - System Clock and reset Control Register		15-27
@@ -272,21 +272,21 @@
  */
 #define SCCR_MASK	SCCR_EBDF11
 /* up to 50 MHz we use a 1:1 clock */
-#define CFG_SCCR	(SCCR_COM00 | SCCR_TBS)
+#define CONFIG_SYS_SCCR	(SCCR_COM00 | SCCR_TBS)
 
 /*-----------------------------------------------------------------------
  * PCMCIA stuff
  *-----------------------------------------------------------------------
  *
  */
-#define CFG_PCMCIA_MEM_ADDR	(0xE0000000)
-#define CFG_PCMCIA_MEM_SIZE	( 64 << 20 )
-#define CFG_PCMCIA_DMA_ADDR	(0xE4000000)
-#define CFG_PCMCIA_DMA_SIZE	( 64 << 20 )
-#define CFG_PCMCIA_ATTRB_ADDR	(0xE8000000)
-#define CFG_PCMCIA_ATTRB_SIZE	( 64 << 20 )
-#define CFG_PCMCIA_IO_ADDR	(0xEC000000)
-#define CFG_PCMCIA_IO_SIZE	( 64 << 20 )
+#define CONFIG_SYS_PCMCIA_MEM_ADDR	(0xE0000000)
+#define CONFIG_SYS_PCMCIA_MEM_SIZE	( 64 << 20 )
+#define CONFIG_SYS_PCMCIA_DMA_ADDR	(0xE4000000)
+#define CONFIG_SYS_PCMCIA_DMA_SIZE	( 64 << 20 )
+#define CONFIG_SYS_PCMCIA_ATTRB_ADDR	(0xE8000000)
+#define CONFIG_SYS_PCMCIA_ATTRB_SIZE	( 64 << 20 )
+#define CONFIG_SYS_PCMCIA_IO_ADDR	(0xEC000000)
+#define CONFIG_SYS_PCMCIA_IO_SIZE	( 64 << 20 )
 
 /*-----------------------------------------------------------------------
  * IDE/ATA stuff (Supports IDE harddisk on PCMCIA Adapter)
@@ -299,28 +299,28 @@
 #undef	CONFIG_IDE_LED			/* LED   for ide not supported	*/
 #undef	CONFIG_IDE_RESET		/* reset for ide not supported	*/
 
-#define CFG_IDE_MAXBUS		1	/* max. 1 IDE bus		*/
-#define CFG_IDE_MAXDEVICE	1	/* max. 1 drive per IDE bus	*/
+#define CONFIG_SYS_IDE_MAXBUS		1	/* max. 1 IDE bus		*/
+#define CONFIG_SYS_IDE_MAXDEVICE	1	/* max. 1 drive per IDE bus	*/
 
-#define CFG_ATA_IDE0_OFFSET	0x0000
+#define CONFIG_SYS_ATA_IDE0_OFFSET	0x0000
 
-#define CFG_ATA_BASE_ADDR	CFG_PCMCIA_MEM_ADDR
+#define CONFIG_SYS_ATA_BASE_ADDR	CONFIG_SYS_PCMCIA_MEM_ADDR
 
 /* Offset for data I/O			*/
-#define CFG_ATA_DATA_OFFSET	(CFG_PCMCIA_MEM_SIZE + 0x320)
+#define CONFIG_SYS_ATA_DATA_OFFSET	(CONFIG_SYS_PCMCIA_MEM_SIZE + 0x320)
 
 /* Offset for normal register accesses	*/
-#define CFG_ATA_REG_OFFSET	(2 * CFG_PCMCIA_MEM_SIZE + 0x320)
+#define CONFIG_SYS_ATA_REG_OFFSET	(2 * CONFIG_SYS_PCMCIA_MEM_SIZE + 0x320)
 
 /* Offset for alternate registers	*/
-#define CFG_ATA_ALT_OFFSET	0x0100
+#define CONFIG_SYS_ATA_ALT_OFFSET	0x0100
 
 /*-----------------------------------------------------------------------
  *
  *-----------------------------------------------------------------------
  *
  */
-#define CFG_DER	0
+#define CONFIG_SYS_DER	0
 
 /*
  * Init Memory Controller:
@@ -331,21 +331,21 @@
 #define FLASH_BASE0_PRELIM	0x40000000	/* FLASH bank #0	*/
 #define FLASH_BASE1_PRELIM	0x60000000	/* FLASH bank #1	*/
 
-#define CFG_PRELIM_OR_AM	0xFE000000	/* OR addr mask */
+#define CONFIG_SYS_PRELIM_OR_AM	0xFE000000	/* OR addr mask */
 
-#define CFG_OR_TIMING_FLASH	0xF56
+#define CONFIG_SYS_OR_TIMING_FLASH	0xF56
 
-#define CFG_OR0_PRELIM	(CFG_PRELIM_OR_AM | CFG_OR_TIMING_FLASH)
-#define CFG_BR0_PRELIM	((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_PS_16 | BR_V)
+#define CONFIG_SYS_OR0_PRELIM	(CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_FLASH)
+#define CONFIG_SYS_BR0_PRELIM	((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_PS_16 | BR_V)
 
-#define CFG_OR5_PRELIM	(CFG_PRELIM_OR_AM | CFG_OR_TIMING_FLASH)
-#define CFG_BR5_PRELIM	((FLASH_BASE1_PRELIM & BR_BA_MSK) | BR_PS_32 | BR_V)
+#define CONFIG_SYS_OR5_PRELIM	(CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_FLASH)
+#define CONFIG_SYS_BR5_PRELIM	((FLASH_BASE1_PRELIM & BR_BA_MSK) | BR_PS_32 | BR_V)
 
 /*
  * BR1 and OR1 (Battery backed SRAM)
  */
-#define	CFG_BR1_PRELIM	0x80000401
-#define CFG_OR1_PRELIM	0xFFC00736
+#define	CONFIG_SYS_BR1_PRELIM	0x80000401
+#define CONFIG_SYS_OR1_PRELIM	0xFFC00736
 
 /*
  * BR2 and OR2 (SDRAM)
@@ -353,21 +353,21 @@
 #define SDRAM_BASE_PRELIM	0x00000000	/* SDRAM base	*/
 #define	SDRAM_MAX_SIZE		0x04000000	/* max 64 MB */
 
-#define CFG_OR_TIMING_SDRAM	0x00000A00
+#define CONFIG_SYS_OR_TIMING_SDRAM	0x00000A00
 
-#define CFG_OR2_PRELIM	(CFG_PRELIM_OR_AM | CFG_OR_TIMING_SDRAM )
-#define CFG_BR2_PRELIM	((SDRAM_BASE_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
+#define CONFIG_SYS_OR2_PRELIM	(CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_SDRAM )
+#define CONFIG_SYS_BR2_PRELIM	((SDRAM_BASE_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
 
 /* Marel V37 mem setting */
 
-#define	CFG_BR3_CAN	0xC0000401
-#define CFG_OR3_CAN	0xFFFF0724
+#define	CONFIG_SYS_BR3_CAN	0xC0000401
+#define CONFIG_SYS_OR3_CAN	0xFFFF0724
 
 /*
-#define	CFG_BR3_PRELIM	0xFA400001
-#define CFG_OR3_PRELIM	0xFFFF8910
-#define	CFG_BR4_PRELIM	0xFA000401
-#define CFG_OR4_PRELIM	0xFFFE0970
+#define	CONFIG_SYS_BR3_PRELIM	0xFA400001
+#define CONFIG_SYS_OR3_PRELIM	0xFFFF8910
+#define	CONFIG_SYS_BR4_PRELIM	0xFA000401
+#define CONFIG_SYS_OR4_PRELIM	0xFFFE0970
 */
 
 /*
@@ -375,19 +375,19 @@
  */
 
 /* periodic timer for refresh */
-#define CFG_MAMR_PTA	97		/* start with divider for 100 MHz	*/
+#define CONFIG_SYS_MAMR_PTA	97		/* start with divider for 100 MHz	*/
 
 /*
  * Refresh clock Prescalar
  */
-#define CFG_MPTPR	MPTPR_PTP_DIV16
+#define CONFIG_SYS_MPTPR	MPTPR_PTP_DIV16
 
 /*
  * MAMR settings for SDRAM
  */
 
 /* 10 column SDRAM */
-#define CFG_MAMR_10COL	((CFG_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
+#define CONFIG_SYS_MAMR_10COL	((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
 			 MAMR_AMA_TYPE_2 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A12 |	\
 			 MAMR_GPL_A4DIS | MAMR_RLFA_4X | MAMR_WLFA_3X | MAMR_TLFA_16X)
 
diff --git a/include/configs/v38b.h b/include/configs/v38b.h
index 35745484d..0156ce1c1 100644
--- a/include/configs/v38b.h
+++ b/include/configs/v38b.h
@@ -29,7 +29,7 @@
 #define CONFIG_MPC5xxx			1	/* This is an MPC5xxx CPU */
 #define CONFIG_MPC5200			1	/* This is an MPC5200 CPU */
 #define CONFIG_V38B			1	/* ...on V38B board */
-#define CFG_MPC5XXX_CLKIN	33000000	/* ...running at 33.000000MHz */
+#define CONFIG_SYS_MPC5XXX_CLKIN	33000000	/* ...running at 33.000000MHz */
 
 #define CONFIG_RTC_PCF8563		1	/* has PCF8563 RTC */
 #define CONFIG_MPC5200_DDR		1	/* has DDR SDRAM */
@@ -41,7 +41,7 @@
 #define CONFIG_BOARD_EARLY_INIT_R	1	/* do board-specific init */
 #define CONFIG_BOARD_EARLY_INIT_F	1	/* do board-specific init */
 
-#define CFG_XLB_PIPELINING		1	/* gives better performance */
+#define CONFIG_SYS_XLB_PIPELINING		1	/* gives better performance */
 
 #define BOOTFLAG_COLD		0x01	/* Normal Power-On: Boot from FLASH  */
 #define BOOTFLAG_WARM		0x02	/* Software reboot */
@@ -53,7 +53,7 @@
  */
 #define CONFIG_PSC_CONSOLE	1	/* console is on PSC1 */
 #define CONFIG_BAUDRATE		115200	/* ... at 115200 bps */
-#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
 
 /*
  * DDR
@@ -121,8 +121,8 @@
 /*
  * Boot low with 16 MB Flash
  */
-#define CFG_LOWBOOT		1
-#define CFG_LOWBOOT16		1
+#define CONFIG_SYS_LOWBOOT		1
+#define CONFIG_SYS_LOWBOOT16		1
 
 /*
  * Autobooting
@@ -173,75 +173,75 @@
 /*
  * IPB Bus clocking configuration.
  */
-#undef CFG_IPBCLK_EQUALS_XLBCLK			/* define for 133MHz speed */
+#undef CONFIG_SYS_IPBCLK_EQUALS_XLBCLK			/* define for 133MHz speed */
 #endif
 
 /*
  * I2C configuration
  */
 #define CONFIG_HARD_I2C		1	/* I2C with hardware support */
-#define CFG_I2C_MODULE		2	/* Select I2C module #1 or #2 */
-#define CFG_I2C_SPEED		100000	/* 100 kHz */
-#define CFG_I2C_SLAVE		0x7F
+#define CONFIG_SYS_I2C_MODULE		2	/* Select I2C module #1 or #2 */
+#define CONFIG_SYS_I2C_SPEED		100000	/* 100 kHz */
+#define CONFIG_SYS_I2C_SLAVE		0x7F
 
 /*
  * EEPROM configuration
  */
-#define CFG_I2C_EEPROM_ADDR		0x50	/* 1010000x */
-#define CFG_I2C_EEPROM_ADDR_LEN		1
-#define CFG_EEPROM_PAGE_WRITE_BITS	3
-#define CFG_EEPROM_PAGE_WRITE_DELAY_MS	70
+#define CONFIG_SYS_I2C_EEPROM_ADDR		0x50	/* 1010000x */
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN		1
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS	3
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	70
 
 /*
  * RTC configuration
  */
-#define CFG_I2C_RTC_ADDR		0x51
+#define CONFIG_SYS_I2C_RTC_ADDR		0x51
 
 /*
  * Flash configuration - use CFI driver
  */
-#define CFG_FLASH_CFI		1		/* Flash is CFI conformant */
+#define CONFIG_SYS_FLASH_CFI		1		/* Flash is CFI conformant */
 #define CONFIG_FLASH_CFI_DRIVER	1		/* Use the common driver */
-#define CFG_FLASH_CFI_AMD_RESET	1
-#define CFG_FLASH_BASE		0xFF000000
-#define CFG_MAX_FLASH_BANKS	1		/* max num of flash banks */
-#define CFG_FLASH_BANKS_LIST	{ CFG_FLASH_BASE }
-#define CFG_FLASH_SIZE		0x01000000	/* 16 MiB */
-#define CFG_MAX_FLASH_SECT	256		/* max num of sects on one chip */
-#define CFG_FLASH_USE_BUFFER_WRITE	1	/* flash write speed-up */
+#define CONFIG_SYS_FLASH_CFI_AMD_RESET	1
+#define CONFIG_SYS_FLASH_BASE		0xFF000000
+#define CONFIG_SYS_MAX_FLASH_BANKS	1		/* max num of flash banks */
+#define CONFIG_SYS_FLASH_BANKS_LIST	{ CONFIG_SYS_FLASH_BASE }
+#define CONFIG_SYS_FLASH_SIZE		0x01000000	/* 16 MiB */
+#define CONFIG_SYS_MAX_FLASH_SECT	256		/* max num of sects on one chip */
+#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE	1	/* flash write speed-up */
 
 /*
  * Environment settings
  */
-#define CFG_ENV_IS_IN_FLASH	1
-#define CFG_ENV_ADDR		(CFG_FLASH_BASE + 0x00040000)
-#define CFG_ENV_SIZE		0x10000
-#define CFG_ENV_SECT_SIZE	0x10000
+#define CONFIG_ENV_IS_IN_FLASH	1
+#define CONFIG_ENV_ADDR		(CONFIG_SYS_FLASH_BASE + 0x00040000)
+#define CONFIG_ENV_SIZE		0x10000
+#define CONFIG_ENV_SECT_SIZE	0x10000
 #define CONFIG_ENV_OVERWRITE	1
 
 /*
  * Memory map
  */
-#define CFG_MBAR		0xF0000000
-#define CFG_SDRAM_BASE		0x00000000
-#define CFG_DEFAULT_MBAR	0x80000000
+#define CONFIG_SYS_MBAR		0xF0000000
+#define CONFIG_SYS_SDRAM_BASE		0x00000000
+#define CONFIG_SYS_DEFAULT_MBAR	0x80000000
 
 /* Use SRAM until RAM will be available */
-#define CFG_INIT_RAM_ADDR	MPC5XXX_SRAM
-#define CFG_INIT_RAM_END	MPC5XXX_SRAM_SIZE	/* End of used area in DPRAM */
+#define CONFIG_SYS_INIT_RAM_ADDR	MPC5XXX_SRAM
+#define CONFIG_SYS_INIT_RAM_END	MPC5XXX_SRAM_SIZE	/* End of used area in DPRAM */
 
-#define CFG_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
-#define CFG_MONITOR_BASE	TEXT_BASE
-#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
-#   define CFG_RAMBOOT		1
+#define CONFIG_SYS_MONITOR_BASE	TEXT_BASE
+#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
+#   define CONFIG_SYS_RAMBOOT		1
 #endif
 
-#define CFG_MONITOR_LEN		(256 << 10)	/* Reserve 256kB for Monitor */
-#define CFG_MALLOC_LEN		(128 << 10)	/* Reserve 128kB for malloc() */
-#define CFG_BOOTMAPSZ		(8 << 20)	/* Linux initial memory map */
+#define CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 256kB for Monitor */
+#define CONFIG_SYS_MALLOC_LEN		(128 << 10)	/* Reserve 128kB for malloc() */
+#define CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Linux initial memory map */
 
 /*
  * Ethernet configuration
@@ -253,50 +253,50 @@
 /*
  * GPIO configuration
  */
-#define CFG_GPS_PORT_CONFIG	0x90001404
+#define CONFIG_SYS_GPS_PORT_CONFIG	0x90001404
 
 /*
  * Miscellaneous configurable options
  */
-#define CFG_LONGHELP			/* undef to save memory */
-#define CFG_PROMPT		"=> "	/* Monitor Command Prompt */
+#define CONFIG_SYS_LONGHELP			/* undef to save memory */
+#define CONFIG_SYS_PROMPT		"=> "	/* Monitor Command Prompt */
 #if defined(CONFIG_CMD_KGDB)
-#define CFG_CBSIZE		1024	/* Console I/O Buffer Size */
+#define CONFIG_SYS_CBSIZE		1024	/* Console I/O Buffer Size */
 #else
-#define CFG_CBSIZE		256	/* Console I/O Buffer Size */
+#define CONFIG_SYS_CBSIZE		256	/* Console I/O Buffer Size */
 #endif
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16)	/* Print Buffer Size */
-#define CFG_MAXARGS		16		/* max number of command args */
-#define CFG_BARGSIZE		CFG_CBSIZE	/* Boot Argument Buffer Size */
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)	/* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS		16		/* max number of command args */
+#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size */
 
-#define CFG_MEMTEST_START	0x00100000	/* memtest works on */
-#define CFG_MEMTEST_END		0x00f00000	/* 1 ... 15 MB in DRAM */
+#define CONFIG_SYS_MEMTEST_START	0x00100000	/* memtest works on */
+#define CONFIG_SYS_MEMTEST_END		0x00f00000	/* 1 ... 15 MB in DRAM */
 
-#define CFG_LOAD_ADDR		0x100000	/* default load address */
+#define CONFIG_SYS_LOAD_ADDR		0x100000	/* default load address */
 
-#define CFG_HZ			1000	/* decrementer freq: 1 ms ticks */
+#define CONFIG_SYS_HZ			1000	/* decrementer freq: 1 ms ticks */
 
-#define CFG_CACHELINE_SIZE	32	/* For MPC5xxx CPUs */
+#define CONFIG_SYS_CACHELINE_SIZE	32	/* For MPC5xxx CPUs */
 #if defined(CONFIG_CMD_KGDB)
-#  define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value */
+#  define CONFIG_SYS_CACHELINE_SHIFT	5	/* log base 2 of the above value */
 #endif
 
 /*
  * Various low-level settings
  */
-#define CFG_HID0_INIT		HID0_ICE | HID0_ICFI
-#define CFG_HID0_FINAL		HID0_ICE
+#define CONFIG_SYS_HID0_INIT		HID0_ICE | HID0_ICFI
+#define CONFIG_SYS_HID0_FINAL		HID0_ICE
 
-#define CFG_BOOTCS_START	CFG_FLASH_BASE
-#define CFG_BOOTCS_SIZE		CFG_FLASH_SIZE
-#define CFG_BOOTCS_CFG		0x00047801
-#define CFG_CS0_START		CFG_FLASH_BASE
-#define CFG_CS0_SIZE		CFG_FLASH_SIZE
+#define CONFIG_SYS_BOOTCS_START	CONFIG_SYS_FLASH_BASE
+#define CONFIG_SYS_BOOTCS_SIZE		CONFIG_SYS_FLASH_SIZE
+#define CONFIG_SYS_BOOTCS_CFG		0x00047801
+#define CONFIG_SYS_CS0_START		CONFIG_SYS_FLASH_BASE
+#define CONFIG_SYS_CS0_SIZE		CONFIG_SYS_FLASH_SIZE
 
-#define CFG_CS_BURST		0x00000000
-#define CFG_CS_DEADCYCLE	0x33333333
+#define CONFIG_SYS_CS_BURST		0x00000000
+#define CONFIG_SYS_CS_DEADCYCLE	0x33333333
 
-#define CFG_RESET_ADDRESS	0xff000000
+#define CONFIG_SYS_RESET_ADDRESS	0xff000000
 
 /*
  * IDE/ATA (supports IDE harddisk)
@@ -308,20 +308,20 @@
 #define CONFIG_IDE_RESET		/* reset for ide supported */
 #define CONFIG_IDE_PREINIT
 
-#define CFG_IDE_MAXBUS		1	/* max. 1 IDE bus */
-#define CFG_IDE_MAXDEVICE	1	/* max. 1 drive per IDE bus */
+#define CONFIG_SYS_IDE_MAXBUS		1	/* max. 1 IDE bus */
+#define CONFIG_SYS_IDE_MAXDEVICE	1	/* max. 1 drive per IDE bus */
 
-#define CFG_ATA_IDE0_OFFSET	0x0000
+#define CONFIG_SYS_ATA_IDE0_OFFSET	0x0000
 
-#define CFG_ATA_BASE_ADDR	MPC5XXX_ATA
+#define CONFIG_SYS_ATA_BASE_ADDR	MPC5XXX_ATA
 
-#define CFG_ATA_DATA_OFFSET	(0x0060)	/* data I/O offset */
+#define CONFIG_SYS_ATA_DATA_OFFSET	(0x0060)	/* data I/O offset */
 
-#define CFG_ATA_REG_OFFSET	(CFG_ATA_DATA_OFFSET)	/* normal register accesses offset */
+#define CONFIG_SYS_ATA_REG_OFFSET	(CONFIG_SYS_ATA_DATA_OFFSET)	/* normal register accesses offset */
 
-#define CFG_ATA_ALT_OFFSET	(0x005C)	/* alternate registers offset */
+#define CONFIG_SYS_ATA_ALT_OFFSET	(0x005C)	/* alternate registers offset */
 
-#define CFG_ATA_STRIDE		4		/* Interval between registers */
+#define CONFIG_SYS_ATA_STRIDE		4		/* Interval between registers */
 
 /*
  * Status LED
@@ -329,26 +329,26 @@
 #define  CONFIG_STATUS_LED		/* Status LED enabled */
 #define  CONFIG_BOARD_SPECIFIC_LED	/* version has board specific leds */
 
-#define CFG_LED_BASE	MPC5XXX_GPT7_ENABLE	/* Timer 7 GPIO */
+#define CONFIG_SYS_LED_BASE	MPC5XXX_GPT7_ENABLE	/* Timer 7 GPIO */
 #ifndef __ASSEMBLY__
 typedef unsigned int led_id_t;
 
 #define __led_toggle(_msk) \
 	do { \
-		*((volatile long *) (CFG_LED_BASE)) ^= (_msk); \
+		*((volatile long *) (CONFIG_SYS_LED_BASE)) ^= (_msk); \
 	} while(0)
 
 #define __led_set(_msk, _st) \
 	do { \
 		if ((_st)) \
-			*((volatile long *) (CFG_LED_BASE)) &= ~(_msk); \
+			*((volatile long *) (CONFIG_SYS_LED_BASE)) &= ~(_msk); \
 		else \
-			*((volatile long *) (CFG_LED_BASE)) |= (_msk); \
+			*((volatile long *) (CONFIG_SYS_LED_BASE)) |= (_msk); \
 	} while(0)
 
 #define __led_init(_msk, st) \
 	do { \
-		*((volatile long *) (CFG_LED_BASE)) |= 0x34; \
+		*((volatile long *) (CONFIG_SYS_LED_BASE)) |= 0x34; \
 	} while(0)
 #endif /* __ASSEMBLY__ */
 
diff --git a/include/configs/v5fx30teval.h b/include/configs/v5fx30teval.h
new file mode 100644
index 000000000..d300c4b30
--- /dev/null
+++ b/include/configs/v5fx30teval.h
@@ -0,0 +1,49 @@
+/*
+ * (C) Copyright 2008
+ *  Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@uam.es
+ *  This work has been supported by: QTechnology  http://qtec.com/
+ *  This program is free software: you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation, either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*CPU*/
+#define CONFIG_440		1
+#define CONFIG_XILINX_ML507	1
+#include "../board/avnet/v5fx30teval/xparameters.h"
+
+/*Mem Map*/
+#define CONFIG_SYS_SDRAM_SIZE_MB	64
+
+/*Env*/
+#define	CONFIG_ENV_IS_IN_FLASH	1
+#define	CONFIG_ENV_SIZE		0x20000
+#define	CONFIG_ENV_SECT_SIZE	0x20000
+#define CONFIG_ENV_OFFSET		0x1A0000
+#define CONFIG_ENV_ADDR		(XPAR_FLASH_MEM0_BASEADDR+CONFIG_ENV_OFFSET)
+
+/*Misc*/
+#define CONFIG_SYS_PROMPT		"v5fx30t:/# "	/* Monitor Command Prompt    */
+#define CONFIG_PREBOOT		"echo U-Boot is up and runnining;"
+
+/*Flash*/
+#define	CONFIG_SYS_FLASH_SIZE		(16*1024*1024)
+#define	CONFIG_SYS_MAX_FLASH_SECT	131
+#define MTDIDS_DEFAULT		"nor0=v5fx30t-flash"
+#define MTDPARTS_DEFAULT	"mtdparts=v5fx30t-flash:-(user)"
+
+/*Generic Configs*/
+#include <configs/xilinx-ppc440.h>
+
+#endif						/* __CONFIG_H */
diff --git a/include/configs/versatile.h b/include/configs/versatile.h
index a88d356b1..d81242165 100644
--- a/include/configs/versatile.h
+++ b/include/configs/versatile.h
@@ -40,14 +40,14 @@
 #define CONFIG_ARCH_VERSATILE   1	/* Specifically, a Versatile	*/
 
 
-#define CFG_MEMTEST_START       0x100000
-#define CFG_MEMTEST_END         0x10000000
-#define CFG_HZ                  (1000000 / 256)
-#define CFG_TIMERBASE           0x101E2000	/* Timer 0 and 1 base */
+#define CONFIG_SYS_MEMTEST_START       0x100000
+#define CONFIG_SYS_MEMTEST_END         0x10000000
+#define CONFIG_SYS_HZ                  (1000000 / 256)
+#define CONFIG_SYS_TIMERBASE           0x101E2000	/* Timer 0 and 1 base */
 
-#define CFG_TIMER_INTERVAL	10000
-#define CFG_TIMER_RELOAD	(CFG_TIMER_INTERVAL >> 4)	/* Divide by 16 */
-#define CFG_TIMER_CTRL          0x84				/* Enable, Clock / 16 */
+#define CONFIG_SYS_TIMER_INTERVAL	10000
+#define CONFIG_SYS_TIMER_RELOAD	(CONFIG_SYS_TIMER_INTERVAL >> 4)	/* Divide by 16 */
+#define CONFIG_SYS_TIMER_CTRL          0x84				/* Enable, Clock / 16 */
 
 /*
  * control registers
@@ -71,8 +71,8 @@
 /*
  * Size of malloc() pool
  */
-#define CFG_MALLOC_LEN	(CFG_ENV_SIZE + 128*1024)
-#define CFG_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
+#define CONFIG_SYS_MALLOC_LEN	(CONFIG_ENV_SIZE + 128*1024)
+#define CONFIG_SYS_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
 
 /*
  * Hardware drivers
@@ -86,15 +86,15 @@
 /*
  * NS16550 Configuration
  */
-#define CFG_PL011_SERIAL
+#define CONFIG_PL011_SERIAL
 #define CONFIG_PL011_CLOCK	24000000
-#define CONFIG_PL01x_PORTS	{ (void *)CFG_SERIAL0, (void *)CFG_SERIAL1 }
+#define CONFIG_PL01x_PORTS	{ (void *)CONFIG_SYS_SERIAL0, (void *)CONFIG_SYS_SERIAL1 }
 #define CONFIG_CONS_INDEX	0
 
 #define CONFIG_BAUDRATE         38400
-#define CFG_BAUDRATE_TABLE      { 9600, 19200, 38400, 57600, 115200 }
-#define CFG_SERIAL0		0x101F1000
-#define CFG_SERIAL1		0x101F2000
+#define CONFIG_SYS_BAUDRATE_TABLE      { 9600, 19200, 38400, 57600, 115200 }
+#define CONFIG_SYS_SERIAL0		0x101F1000
+#define CONFIG_SYS_SERIAL1		0x101F2000
 
 
 /*
@@ -136,16 +136,16 @@
 /*
  * Miscellaneous configurable options
  */
-#define CFG_LONGHELP	/* undef to save memory     */
-#define CFG_PROMPT	"Versatile # "	/* Monitor Command Prompt   */
-#define CFG_CBSIZE	256		/* Console I/O Buffer Size  */
+#define CONFIG_SYS_LONGHELP	/* undef to save memory     */
+#define CONFIG_SYS_PROMPT	"Versatile # "	/* Monitor Command Prompt   */
+#define CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size  */
 /* Print Buffer Size */
-#define CFG_PBSIZE	(CFG_CBSIZE+sizeof(CFG_PROMPT)+16)
-#define CFG_MAXARGS	16		/* max number of command args   */
-#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size    */
+#define CONFIG_SYS_PBSIZE	(CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
+#define CONFIG_SYS_MAXARGS	16		/* max number of command args   */
+#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size    */
 
-#undef	CFG_CLKS_IN_HZ		/* everything, incl board info, in Hz */
-#define CFG_LOAD_ADDR	0x7fc0	/* default load address */
+#undef	CONFIG_SYS_CLKS_IN_HZ		/* everything, incl board info, in Hz */
+#define CONFIG_SYS_LOAD_ADDR	0x7fc0	/* default load address */
 
 /*-----------------------------------------------------------------------
  * Stack sizes
@@ -165,7 +165,7 @@
 #define PHYS_SDRAM_1            0x00000000	/* SDRAM Bank #1 */
 #define PHYS_SDRAM_1_SIZE       0x08000000	/* 128 MB */
 
-#define CFG_FLASH_BASE          0x34000000
+#define CONFIG_SYS_FLASH_BASE          0x34000000
 
 /*-----------------------------------------------------------------------
  * FLASH and environment organization
@@ -176,19 +176,19 @@
 #define VERSATILE_FLASHCTRL		      (VERSATILE_SYS_BASE + VERSATILE_SYS_FLASH_OFFSET)
 #define VERSATILE_FLASHPROG_FLVPPEN	      (1 << 0)	/* Enable writing to flash */
 
-#define CFG_MAX_FLASH_BANKS	1		/* max number of memory banks */
+#define CONFIG_SYS_MAX_FLASH_BANKS	1		/* max number of memory banks */
 #define PHYS_FLASH_SIZE         0x34000000	/* 64MB */
 /* timeout values are in ticks */
-#define CFG_FLASH_ERASE_TOUT	(20*CFG_HZ)	/* Timeout for Flash Erase */
-#define CFG_FLASH_WRITE_TOUT	(20*CFG_HZ)	/* Timeout for Flash Write */
-#define CFG_MAX_FLASH_SECT	(256)
+#define CONFIG_SYS_FLASH_ERASE_TOUT	(20*CONFIG_SYS_HZ)	/* Timeout for Flash Erase */
+#define CONFIG_SYS_FLASH_WRITE_TOUT	(20*CONFIG_SYS_HZ)	/* Timeout for Flash Write */
+#define CONFIG_SYS_MAX_FLASH_SECT	(256)
 
-#define PHYS_FLASH_1		(CFG_FLASH_BASE)
+#define PHYS_FLASH_1		(CONFIG_SYS_FLASH_BASE)
 
-#define CFG_ENV_IS_IN_FLASH     1               /* env in flash instead of CFG_ENV_IS_NOWHERE */
-#define CFG_ENV_SECT_SIZE       0x00020000      /* 256 KB sectors (x2) */
-#define CFG_ENV_SIZE            0x10000         /* Total Size of Environment Sector */
-#define CFG_ENV_OFFSET          0x01f00000      /* environment starts here  */
-#define CFG_ENV_ADDR            (CFG_FLASH_BASE + CFG_ENV_OFFSET)
+#define CONFIG_ENV_IS_IN_FLASH     1               /* env in flash instead of CONFIG_ENV_IS_NOWHERE */
+#define CONFIG_ENV_SECT_SIZE       0x00020000      /* 256 KB sectors (x2) */
+#define CONFIG_ENV_SIZE            0x10000         /* Total Size of Environment Sector */
+#define CONFIG_ENV_OFFSET          0x01f00000      /* environment starts here  */
+#define CONFIG_ENV_ADDR            (CONFIG_SYS_FLASH_BASE + CONFIG_ENV_OFFSET)
 
 #endif							/* __CONFIG_H */
diff --git a/include/configs/virtlab2.h b/include/configs/virtlab2.h
index 1a125f16c..38b0a4e94 100644
--- a/include/configs/virtlab2.h
+++ b/include/configs/virtlab2.h
@@ -81,7 +81,7 @@
 #define CONFIG_BOOTCOMMAND	"run flash_self"
 
 #define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
-#undef	CFG_LOADS_BAUD_CHANGE		/* don't allow baudrate change	*/
+#undef	CONFIG_SYS_LOADS_BAUD_CHANGE		/* don't allow baudrate change	*/
 
 #undef	CONFIG_WATCHDOG			/* watchdog disabled		*/
 
@@ -132,32 +132,32 @@
 /*
  * Miscellaneous configurable options
  */
-#define	CFG_LONGHELP			/* undef to save memory		*/
-#define	CFG_PROMPT		"=> "	/* Monitor Command Prompt	*/
+#define	CONFIG_SYS_LONGHELP			/* undef to save memory		*/
+#define	CONFIG_SYS_PROMPT		"=> "	/* Monitor Command Prompt	*/
 
 #define CONFIG_CMDLINE_EDITING	1	/* add command line history	*/
-#define	CFG_HUSH_PARSER		1	/* use "hush" command parser	*/
-#ifdef	CFG_HUSH_PARSER
-#define	CFG_PROMPT_HUSH_PS2	"> "
+#define	CONFIG_SYS_HUSH_PARSER		1	/* use "hush" command parser	*/
+#ifdef	CONFIG_SYS_HUSH_PARSER
+#define	CONFIG_SYS_PROMPT_HUSH_PS2	"> "
 #endif
 
 #if defined(CONFIG_CMD_KGDB)
-#define	CFG_CBSIZE		1024	/* Console I/O Buffer Size	*/
+#define	CONFIG_SYS_CBSIZE		1024	/* Console I/O Buffer Size	*/
 #else
-#define	CFG_CBSIZE		256	/* Console I/O Buffer Size	*/
+#define	CONFIG_SYS_CBSIZE		256	/* Console I/O Buffer Size	*/
 #endif
-#define	CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define	CFG_MAXARGS		16	/* max number of command args	*/
-#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+#define	CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define	CONFIG_SYS_MAXARGS		16	/* max number of command args	*/
+#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
 
-#define CFG_MEMTEST_START	0x0400000	/* memtest works on	*/
-#define CFG_MEMTEST_END		0x0C00000	/* 4 ... 12 MB in DRAM	*/
+#define CONFIG_SYS_MEMTEST_START	0x0400000	/* memtest works on	*/
+#define CONFIG_SYS_MEMTEST_END		0x0C00000	/* 4 ... 12 MB in DRAM	*/
 
-#define	CFG_LOAD_ADDR		0x100000	/* default load address	*/
+#define	CONFIG_SYS_LOAD_ADDR		0x100000	/* default load address	*/
 
-#define	CFG_HZ			1000	/* decrementer freq: 1 ms ticks	*/
+#define	CONFIG_SYS_HZ			1000	/* decrementer freq: 1 ms ticks	*/
 
-#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
 
 /*
  * Low Level Configuration Settings
@@ -167,57 +167,59 @@
 /*-----------------------------------------------------------------------
  * Internal Memory Mapped Register
  */
-#define CFG_IMMR		0xFFF00000
+#define CONFIG_SYS_IMMR		0xFFF00000
 
 /*-----------------------------------------------------------------------
  * Definitions for initial stack pointer and data area (in DPRAM)
  */
-#define CFG_INIT_RAM_ADDR	CFG_IMMR
-#define	CFG_INIT_RAM_END	0x2F00	/* End of used area in DPRAM	*/
-#define	CFG_GBL_DATA_SIZE	64  /* size in bytes reserved for initial data */
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define	CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_IMMR
+#define	CONFIG_SYS_INIT_RAM_END	0x2F00	/* End of used area in DPRAM	*/
+#define	CONFIG_SYS_GBL_DATA_SIZE	64  /* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define	CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
 /*-----------------------------------------------------------------------
  * Start addresses for the final memory configuration
  * (Set up by the startup code)
- * Please note that CFG_SDRAM_BASE _must_ start at 0
+ * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
  */
-#define	CFG_SDRAM_BASE		0x00000000
-#define CFG_FLASH_BASE		0x40000000
-#define	CFG_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor	*/
-#define CFG_MONITOR_BASE	CFG_FLASH_BASE
-#define	CFG_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/
+#define	CONFIG_SYS_SDRAM_BASE		0x00000000
+#define CONFIG_SYS_FLASH_BASE		0x40000000
+#define	CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor	*/
+#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_FLASH_BASE
+#define	CONFIG_SYS_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/
 
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define	CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux	*/
+#define	CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux	*/
 
 /*-----------------------------------------------------------------------
  * FLASH organization
  */
 
 /* use CFI flash driver */
-#define CFG_FLASH_CFI		1	/* Flash is CFI conformant */
+#define CONFIG_SYS_FLASH_CFI		1	/* Flash is CFI conformant */
 #define CONFIG_FLASH_CFI_DRIVER	1	/* Use the common driver */
-#define CFG_FLASH_BANKS_LIST	{ CFG_FLASH_BASE, CFG_FLASH_BASE+flash_info[0].size }
-#define CFG_FLASH_EMPTY_INFO
-#define CFG_FLASH_USE_BUFFER_WRITE	1
-#define CFG_MAX_FLASH_BANKS	2	/* max number of memory banks */
-#define CFG_MAX_FLASH_SECT	71	/* max number of sectors on one chip */
+#define CONFIG_SYS_FLASH_BANKS_LIST	{ CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE+flash_info[0].size }
+#define CONFIG_SYS_FLASH_EMPTY_INFO
+#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE	1
+#define CONFIG_SYS_MAX_FLASH_BANKS	2	/* max number of memory banks */
+#define CONFIG_SYS_MAX_FLASH_SECT	71	/* max number of sectors on one chip */
 
-#define	CFG_ENV_IS_IN_FLASH	1
-#define	CFG_ENV_OFFSET		0x8000	/*   Offset   of Environment Sector	*/
-#define	CFG_ENV_SIZE		0x4000	/* Total Size of Environment Sector	*/
+#define	CONFIG_ENV_IS_IN_FLASH	1
+#define	CONFIG_ENV_OFFSET		0x8000	/*   Offset   of Environment Sector	*/
+#define	CONFIG_ENV_SIZE		0x4000	/* Total Size of Environment Sector	*/
 
 /* Address and size of Redundant Environment Sector	*/
-#define CFG_ENV_OFFSET_REDUND	(CFG_ENV_OFFSET+CFG_ENV_SIZE)
-#define CFG_ENV_SIZE_REDUND	(CFG_ENV_SIZE)
+#define CONFIG_ENV_OFFSET_REDUND	(CONFIG_ENV_OFFSET+CONFIG_ENV_SIZE)
+#define CONFIG_ENV_SIZE_REDUND	(CONFIG_ENV_SIZE)
 
-#define	CFG_USE_PPCENV			/* Environment embedded in sect .ppcenv */
+#define	CONFIG_SYS_USE_PPCENV			/* Environment embedded in sect .ppcenv */
+
+#define CONFIG_MISC_INIT_R		/* Make sure to remap flashes correctly */
 
 /*-----------------------------------------------------------------------
  * Dynamic MTD partition support
@@ -234,16 +236,16 @@
 /*-----------------------------------------------------------------------
  * Hardware Information Block
  */
-#define CFG_HWINFO_OFFSET	0x0003FFC0	/* offset of HW Info block */
-#define CFG_HWINFO_SIZE		0x00000040	/* size   of HW Info block */
-#define CFG_HWINFO_MAGIC	0x54514D38	/* 'TQM8' */
+#define CONFIG_SYS_HWINFO_OFFSET	0x0003FFC0	/* offset of HW Info block */
+#define CONFIG_SYS_HWINFO_SIZE		0x00000040	/* size   of HW Info block */
+#define CONFIG_SYS_HWINFO_MAGIC	0x54514D38	/* 'TQM8' */
 
 /*-----------------------------------------------------------------------
  * Cache Configuration
  */
-#define CFG_CACHELINE_SIZE	16	/* For all MPC8xx CPUs			*/
+#define CONFIG_SYS_CACHELINE_SIZE	16	/* For all MPC8xx CPUs			*/
 #if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT	4	/* log base 2 of the above value	*/
+#define CONFIG_SYS_CACHELINE_SHIFT	4	/* log base 2 of the above value	*/
 #endif
 
 /*-----------------------------------------------------------------------
@@ -253,10 +255,10 @@
  * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze
  */
 #if defined(CONFIG_WATCHDOG)
-#define CFG_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
+#define CONFIG_SYS_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
 			 SYPCR_SWE  | SYPCR_SWRI| SYPCR_SWP)
 #else
-#define CFG_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
+#define CONFIG_SYS_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
 #endif
 
 /*-----------------------------------------------------------------------
@@ -265,9 +267,9 @@
  * PCMCIA config., multi-function pin tri-state
  */
 #ifndef	CONFIG_CAN_DRIVER
-#define CFG_SIUMCR	(SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_MLRC01)
+#define CONFIG_SYS_SIUMCR	(SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_MLRC01)
 #else	/* we must activate GPL5 in the SIUMCR for CAN */
-#define CFG_SIUMCR	(SIUMCR_DBGC11 | SIUMCR_DBPC00 | SIUMCR_MLRC01)
+#define CONFIG_SYS_SIUMCR	(SIUMCR_DBGC11 | SIUMCR_DBPC00 | SIUMCR_MLRC01)
 #endif	/* CONFIG_CAN_DRIVER */
 
 /*-----------------------------------------------------------------------
@@ -275,20 +277,20 @@
  *-----------------------------------------------------------------------
  * Clear Reference Interrupt Status, Timebase freezing enabled
  */
-#define CFG_TBSCR	(TBSCR_REFA | TBSCR_REFB | TBSCR_TBF)
+#define CONFIG_SYS_TBSCR	(TBSCR_REFA | TBSCR_REFB | TBSCR_TBF)
 
 /*-----------------------------------------------------------------------
  * RTCSC - Real-Time Clock Status and Control Register		11-27
  *-----------------------------------------------------------------------
  */
-#define CFG_RTCSC	(RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE)
+#define CONFIG_SYS_RTCSC	(RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE)
 
 /*-----------------------------------------------------------------------
  * PISCR - Periodic Interrupt Status and Control		11-31
  *-----------------------------------------------------------------------
  * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
  */
-#define CFG_PISCR	(PISCR_PS | PISCR_PITF)
+#define CONFIG_SYS_PISCR	(PISCR_PS | PISCR_PITF)
 
 /*-----------------------------------------------------------------------
  * PLPRCR - PLL, Low-Power, and Reset Control Register		15-30
@@ -296,7 +298,7 @@
  * Reset PLL lock status sticky bit, timer expired status bit and timer
  * interrupt status bit
  */
-#define CFG_PLPRCR	(PLPRCR_SPLSS | PLPRCR_TEXPS | PLPRCR_TMIST)
+#define CONFIG_SYS_PLPRCR	(PLPRCR_SPLSS | PLPRCR_TEXPS | PLPRCR_TMIST)
 
 /*-----------------------------------------------------------------------
  * SCCR - System Clock and reset Control Register		15-27
@@ -305,7 +307,7 @@
  * power management and some other internal clocks
  */
 #define SCCR_MASK	SCCR_EBDF11
-#define CFG_SCCR	(SCCR_COM00   | SCCR_DFSYNC00 | SCCR_DFBRG00  | \
+#define CONFIG_SYS_SCCR	(SCCR_COM00   | SCCR_DFSYNC00 | SCCR_DFBRG00  | \
 			 SCCR_DFNL000 | SCCR_DFNH000  | SCCR_DFLCD000 | \
 			 SCCR_DFALCD00)
 
@@ -314,14 +316,14 @@
  *-----------------------------------------------------------------------
  *
  */
-#define CFG_PCMCIA_MEM_ADDR	(0xE0000000)
-#define CFG_PCMCIA_MEM_SIZE	( 64 << 20 )
-#define CFG_PCMCIA_DMA_ADDR	(0xE4000000)
-#define CFG_PCMCIA_DMA_SIZE	( 64 << 20 )
-#define CFG_PCMCIA_ATTRB_ADDR	(0xE8000000)
-#define CFG_PCMCIA_ATTRB_SIZE	( 64 << 20 )
-#define CFG_PCMCIA_IO_ADDR	(0xEC000000)
-#define CFG_PCMCIA_IO_SIZE	( 64 << 20 )
+#define CONFIG_SYS_PCMCIA_MEM_ADDR	(0xE0000000)
+#define CONFIG_SYS_PCMCIA_MEM_SIZE	( 64 << 20 )
+#define CONFIG_SYS_PCMCIA_DMA_ADDR	(0xE4000000)
+#define CONFIG_SYS_PCMCIA_DMA_SIZE	( 64 << 20 )
+#define CONFIG_SYS_PCMCIA_ATTRB_ADDR	(0xE8000000)
+#define CONFIG_SYS_PCMCIA_ATTRB_SIZE	( 64 << 20 )
+#define CONFIG_SYS_PCMCIA_IO_ADDR	(0xEC000000)
+#define CONFIG_SYS_PCMCIA_IO_SIZE	( 64 << 20 )
 
 /*-----------------------------------------------------------------------
  * IDE/ATA stuff (Supports IDE harddisk on PCMCIA Adapter)
@@ -334,28 +336,28 @@
 #undef	CONFIG_IDE_LED			/* LED   for ide not supported	*/
 #undef	CONFIG_IDE_RESET		/* reset for ide not supported	*/
 
-#define CFG_IDE_MAXBUS		1	/* max. 1 IDE bus		*/
-#define CFG_IDE_MAXDEVICE	1	/* max. 1 drive per IDE bus	*/
+#define CONFIG_SYS_IDE_MAXBUS		1	/* max. 1 IDE bus		*/
+#define CONFIG_SYS_IDE_MAXDEVICE	1	/* max. 1 drive per IDE bus	*/
 
-#define CFG_ATA_IDE0_OFFSET	0x0000
+#define CONFIG_SYS_ATA_IDE0_OFFSET	0x0000
 
-#define CFG_ATA_BASE_ADDR	CFG_PCMCIA_MEM_ADDR
+#define CONFIG_SYS_ATA_BASE_ADDR	CONFIG_SYS_PCMCIA_MEM_ADDR
 
 /* Offset for data I/O			*/
-#define CFG_ATA_DATA_OFFSET	(CFG_PCMCIA_MEM_SIZE + 0x320)
+#define CONFIG_SYS_ATA_DATA_OFFSET	(CONFIG_SYS_PCMCIA_MEM_SIZE + 0x320)
 
 /* Offset for normal register accesses	*/
-#define CFG_ATA_REG_OFFSET	(2 * CFG_PCMCIA_MEM_SIZE + 0x320)
+#define CONFIG_SYS_ATA_REG_OFFSET	(2 * CONFIG_SYS_PCMCIA_MEM_SIZE + 0x320)
 
 /* Offset for alternate registers	*/
-#define CFG_ATA_ALT_OFFSET	0x0100
+#define CONFIG_SYS_ATA_ALT_OFFSET	0x0100
 
 /*-----------------------------------------------------------------------
  *
  *-----------------------------------------------------------------------
  *
  */
-#define CFG_DER	0
+#define CONFIG_SYS_DER	0
 
 /*
  * Init Memory Controller:
@@ -370,22 +372,22 @@
  * restrict access enough to keep SRAM working (if any)
  * but not too much to meddle with FLASH accesses
  */
-#define CFG_REMAP_OR_AM		0x80000000	/* OR addr mask */
-#define CFG_PRELIM_OR_AM	0xE0000000	/* OR addr mask */
+#define CONFIG_SYS_REMAP_OR_AM		0x80000000	/* OR addr mask */
+#define CONFIG_SYS_PRELIM_OR_AM	0xE0000000	/* OR addr mask */
 
 /*
  * FLASH timing:
  */
-#define CFG_OR_TIMING_FLASH	(OR_ACS_DIV1  | OR_TRLX | OR_CSNT_SAM | \
+#define CONFIG_SYS_OR_TIMING_FLASH	(OR_ACS_DIV1  | OR_TRLX | OR_CSNT_SAM | \
 				 OR_SCY_3_CLK | OR_EHTR | OR_BI)
 
-#define CFG_OR0_REMAP	(CFG_REMAP_OR_AM  | CFG_OR_TIMING_FLASH)
-#define CFG_OR0_PRELIM	(CFG_PRELIM_OR_AM | CFG_OR_TIMING_FLASH)
-#define CFG_BR0_PRELIM	((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_V )
+#define CONFIG_SYS_OR0_REMAP	(CONFIG_SYS_REMAP_OR_AM  | CONFIG_SYS_OR_TIMING_FLASH)
+#define CONFIG_SYS_OR0_PRELIM	(CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_FLASH)
+#define CONFIG_SYS_BR0_PRELIM	((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_V )
 
-#define CFG_OR1_REMAP	CFG_OR0_REMAP
-#define CFG_OR1_PRELIM	CFG_OR0_PRELIM
-#define CFG_BR1_PRELIM	((FLASH_BASE1_PRELIM & BR_BA_MSK) | BR_V )
+#define CONFIG_SYS_OR1_REMAP	CONFIG_SYS_OR0_REMAP
+#define CONFIG_SYS_OR1_PRELIM	CONFIG_SYS_OR0_PRELIM
+#define CONFIG_SYS_BR1_PRELIM	((FLASH_BASE1_PRELIM & BR_BA_MSK) | BR_V )
 
 /*
  * BR2/3 and OR2/3 (SDRAM)
@@ -396,19 +398,19 @@
 #define	SDRAM_MAX_SIZE		0x04000000	/* max 64 MB per bank	*/
 
 /* SDRAM timing: Multiplexed addresses, GPL5 output to GPL5_A (don't care)	*/
-#define CFG_OR_TIMING_SDRAM	0x00000A00
+#define CONFIG_SYS_OR_TIMING_SDRAM	0x00000A00
 
-#define CFG_OR2_PRELIM	(CFG_PRELIM_OR_AM | CFG_OR_TIMING_SDRAM )
-#define CFG_BR2_PRELIM	((SDRAM_BASE2_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
+#define CONFIG_SYS_OR2_PRELIM	(CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_SDRAM )
+#define CONFIG_SYS_BR2_PRELIM	((SDRAM_BASE2_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
 
 #ifndef	CONFIG_CAN_DRIVER
-#define	CFG_OR3_PRELIM	CFG_OR2_PRELIM
-#define CFG_BR3_PRELIM	((SDRAM_BASE3_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
+#define	CONFIG_SYS_OR3_PRELIM	CONFIG_SYS_OR2_PRELIM
+#define CONFIG_SYS_BR3_PRELIM	((SDRAM_BASE3_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
 #else	/* CAN uses CS3#, so we can have only one SDRAM bank anyway */
-#define	CFG_CAN_BASE		0xC0000000	/* CAN mapped at 0xC0000000	*/
-#define CFG_CAN_OR_AM		0xFFFF8000	/* 32 kB address mask		*/
-#define CFG_OR3_CAN		(CFG_CAN_OR_AM | OR_G5LA | OR_BI)
-#define CFG_BR3_CAN		((CFG_CAN_BASE & BR_BA_MSK) | \
+#define	CONFIG_SYS_CAN_BASE		0xC0000000	/* CAN mapped at 0xC0000000	*/
+#define CONFIG_SYS_CAN_OR_AM		0xFFFF8000	/* 32 kB address mask		*/
+#define CONFIG_SYS_OR3_CAN		(CONFIG_SYS_CAN_OR_AM | OR_G5LA | OR_BI)
+#define CONFIG_SYS_BR3_CAN		((CONFIG_SYS_CAN_BASE & BR_BA_MSK) | \
 					BR_PS_8 | BR_MS_UPMB | BR_V )
 #endif	/* CONFIG_CAN_DRIVER */
 
@@ -439,34 +441,34 @@
  * 80 Mhz => 80.000.000 / Divider = 156
  */
 
-#define CFG_PTA_PER_CLK	((4096 * 32 * 1000) / (4 * 64))
-#define CFG_MAMR_PTA	98
+#define CONFIG_SYS_PTA_PER_CLK	((4096 * 32 * 1000) / (4 * 64))
+#define CONFIG_SYS_MAMR_PTA	98
 
 /*
  * For 16 MBit, refresh rates could be 31.3 us
  * (= 64 ms / 2K = 125 / quad bursts).
  * For a simpler initialization, 15.6 us is used instead.
  *
- * #define CFG_MPTPR_2BK_2K	MPTPR_PTP_DIV32		for 2 banks
- * #define CFG_MPTPR_1BK_2K	MPTPR_PTP_DIV64		for 1 bank
+ * #define CONFIG_SYS_MPTPR_2BK_2K	MPTPR_PTP_DIV32		for 2 banks
+ * #define CONFIG_SYS_MPTPR_1BK_2K	MPTPR_PTP_DIV64		for 1 bank
  */
-#define CFG_MPTPR_2BK_4K	MPTPR_PTP_DIV16		/* setting for 2 banks	*/
-#define CFG_MPTPR_1BK_4K	MPTPR_PTP_DIV32		/* setting for 1 bank	*/
+#define CONFIG_SYS_MPTPR_2BK_4K	MPTPR_PTP_DIV16		/* setting for 2 banks	*/
+#define CONFIG_SYS_MPTPR_1BK_4K	MPTPR_PTP_DIV32		/* setting for 1 bank	*/
 
 /* refresh rate 7.8 us (= 64 ms / 8K = 31.2 / quad bursts) for 256 MBit		*/
-#define CFG_MPTPR_2BK_8K	MPTPR_PTP_DIV8		/* setting for 2 banks	*/
-#define CFG_MPTPR_1BK_8K	MPTPR_PTP_DIV16		/* setting for 1 bank	*/
+#define CONFIG_SYS_MPTPR_2BK_8K	MPTPR_PTP_DIV8		/* setting for 2 banks	*/
+#define CONFIG_SYS_MPTPR_1BK_8K	MPTPR_PTP_DIV16		/* setting for 1 bank	*/
 
 /*
  * MAMR settings for SDRAM
  */
 
 /* 8 column SDRAM */
-#define CFG_MAMR_8COL	((CFG_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
+#define CONFIG_SYS_MAMR_8COL	((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
 			 MAMR_AMA_TYPE_0 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A11 |	\
 			 MAMR_RLFA_1X	 | MAMR_WLFA_1X	   | MAMR_TLFA_4X)
 /* 9 column SDRAM */
-#define CFG_MAMR_9COL	((CFG_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
+#define CONFIG_SYS_MAMR_9COL	((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
 			 MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 |	\
 			 MAMR_RLFA_1X	 | MAMR_WLFA_1X	   | MAMR_TLFA_4X)
 
@@ -480,10 +482,10 @@
 #define BOOTFLAG_WARM	0x02		/* Software reboot			*/
 
 /* Map peripheral control registers on CS4 */
-#define CFG_PERIPHERAL_BASE 0xA0000000
-#define CFG_PERIPHERAL_OR_AM 0xFFFF8000 /* 32 kB address mask */
-#define CFG_OR4_PRELIM (CFG_PERIPHERAL_OR_AM | OR_TRLX | OR_CSNT_SAM | \
+#define CONFIG_SYS_PERIPHERAL_BASE 0xA0000000
+#define CONFIG_SYS_PERIPHERAL_OR_AM 0xFFFF8000 /* 32 kB address mask */
+#define CONFIG_SYS_OR4_PRELIM (CONFIG_SYS_PERIPHERAL_OR_AM | OR_TRLX | OR_CSNT_SAM | \
 						OR_SCY_2_CLK)
-#define CFG_BR4_PRELIM ((CFG_PERIPHERAL_BASE & BR_BA_MSK) | BR_PS_8 | BR_V)
-#define PCMCIA_CTRL (CFG_PERIPHERAL_BASE + 0xB00)
+#define CONFIG_SYS_BR4_PRELIM ((CONFIG_SYS_PERIPHERAL_BASE & BR_BA_MSK) | BR_PS_8 | BR_V)
+#define PCMCIA_CTRL (CONFIG_SYS_PERIPHERAL_BASE + 0xB00)
 #endif	/* __CONFIG_H */
diff --git a/include/configs/voiceblue.h b/include/configs/voiceblue.h
index 20917ee9a..866b72d4c 100644
--- a/include/configs/voiceblue.h
+++ b/include/configs/voiceblue.h
@@ -54,42 +54,42 @@
 
 #define PHYS_FLASH_1		0x00000000	/* Flash Bank #1 */
 
-#define CFG_LOAD_ADDR		PHYS_SDRAM_1 + 0x400000	/* default load address */
+#define CONFIG_SYS_LOAD_ADDR		PHYS_SDRAM_1 + 0x400000	/* default load address */
 
 /*
  * FLASH organization
  */
-#define CFG_FLASH_CFI			/* Flash is CFI conformant */
+#define CONFIG_SYS_FLASH_CFI			/* Flash is CFI conformant */
 #define CONFIG_FLASH_CFI_DRIVER		/* Use the common driver */
-#define CFG_MAX_FLASH_BANKS	1
-#define CFG_FLASH_BASE		PHYS_FLASH_1
+#define CONFIG_SYS_MAX_FLASH_BANKS	1
+#define CONFIG_SYS_FLASH_BASE		PHYS_FLASH_1
 
 /* FIXME: Does not work on AMD flash */
-/* #define CFG_FLASH_USE_BUFFER_WRITE 1 */	/* use buffered writes (20x faster) */
-#define CFG_MAX_FLASH_SECT	512	/* max # of sectors on one chip */
+/* #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 */	/* use buffered writes (20x faster) */
+#define CONFIG_SYS_MAX_FLASH_SECT	512	/* max # of sectors on one chip */
 
-#define CFG_MONITOR_BASE	PHYS_FLASH_1
-#define CFG_MONITOR_LEN		(256 * 1024)
+#define CONFIG_SYS_MONITOR_BASE	PHYS_FLASH_1
+#define CONFIG_SYS_MONITOR_LEN		(256 * 1024)
 
 /*
  * Environment settings
  */
-#define CFG_ENV_IS_IN_FLASH
-#define CFG_ENV_ADDR		(PHYS_FLASH_1 + CFG_MONITOR_LEN)
-#define CFG_ENV_SIZE		(8 * 1024)
-#define CFG_ENV_SECT_SIZE	(64 * 1024)
-#define CFG_ENV_ADDR_REDUND	(CFG_ENV_ADDR + CFG_ENV_SECT_SIZE)
-#define CFG_ENV_SIZE_REDUND	CFG_ENV_SIZE
+#define CONFIG_ENV_IS_IN_FLASH
+#define CONFIG_ENV_ADDR		(PHYS_FLASH_1 + CONFIG_SYS_MONITOR_LEN)
+#define CONFIG_ENV_SIZE		(8 * 1024)
+#define CONFIG_ENV_SECT_SIZE	(64 * 1024)
+#define CONFIG_ENV_ADDR_REDUND	(CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE)
+#define CONFIG_ENV_SIZE_REDUND	CONFIG_ENV_SIZE
 
 #define CONFIG_ENV_OVERWRITE
 
 /*
  * Size of malloc() pool and stack
  */
-#define CFG_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
-#define CFG_MALLOC_LEN		(4 * 1024 * 1024)
+#define CONFIG_SYS_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
+#define CONFIG_SYS_MALLOC_LEN		(4 * 1024 * 1024)
 #define CONFIG_STACKSIZE	(1 * 1024 * 1024)
-#define PHYS_SDRAM_1_RESERVED	(CFG_MONITOR_LEN + CFG_MALLOC_LEN + CONFIG_STACKSIZE)
+#define PHYS_SDRAM_1_RESERVED	(CONFIG_SYS_MONITOR_LEN + CONFIG_SYS_MALLOC_LEN + CONFIG_STACKSIZE)
 
 /*
  * Hardware drivers
@@ -98,25 +98,25 @@
 #define CONFIG_SMC91111_BASE	0x08000300
 
 #define CONFIG_HARD_I2C
-#define CFG_I2C_SPEED		100000
-#define CFG_I2C_SLAVE		1
+#define CONFIG_SYS_I2C_SPEED		100000
+#define CONFIG_SYS_I2C_SLAVE		1
 #define CONFIG_DRIVER_OMAP1510_I2C
 
 #define CONFIG_RTC_DS1307
-#define CFG_I2C_RTC_ADDR	0x68
+#define CONFIG_SYS_I2C_RTC_ADDR	0x68
 
 /*
  * NS16550 Configuration
  */
-#define CFG_NS16550
-#define CFG_NS16550_SERIAL
-#define CFG_NS16550_REG_SIZE	(-4)
-#define CFG_NS16550_CLK		(CONFIG_XTAL_FREQ)	/* can be 12M/32Khz or 48Mhz  */
-#define CFG_NS16550_COM1	OMAP1510_UART1_BASE	/* uart1 */
+#define CONFIG_SYS_NS16550
+#define CONFIG_SYS_NS16550_SERIAL
+#define CONFIG_SYS_NS16550_REG_SIZE	(-4)
+#define CONFIG_SYS_NS16550_CLK		(CONFIG_XTAL_FREQ)	/* can be 12M/32Khz or 48Mhz  */
+#define CONFIG_SYS_NS16550_COM1	OMAP1510_UART1_BASE	/* uart1 */
 
 #define CONFIG_CONS_INDEX	1
 #define CONFIG_BAUDRATE		115200
-#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
 
 
 /*
@@ -152,7 +152,7 @@
 #define CONFIG_BOOTDELAY	3
 #define CONFIG_ZERO_BOOTDELAY_CHECK	/* allow to break in always */
 #undef  CONFIG_BOOTARGS		/* the boot command will set bootargs*/
-#define CFG_AUTOLOAD		"n"		/* No autoload */
+#define CONFIG_SYS_AUTOLOAD		"n"		/* No autoload */
 #define CONFIG_BOOTCOMMAND	"run nboot"
 #define CONFIG_PREBOOT		"run setup"
 #define	CONFIG_EXTRA_ENV_SETTINGS				\
@@ -197,27 +197,27 @@
 /*
  * Miscellaneous configurable options
  */
-#define CFG_HUSH_PARSER
-#define CFG_PROMPT_HUSH_PS2	"> "
+#define CONFIG_SYS_HUSH_PARSER
+#define CONFIG_SYS_PROMPT_HUSH_PS2	"> "
 #define CONFIG_AUTO_COMPLETE
-#define CFG_LONGHELP				/* undef to save memory		*/
-#define CFG_PROMPT		"# "		/* Monitor Command Prompt	*/
-#define CFG_CBSIZE		256		/* Console I/O Buffer Size	*/
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define CFG_MAXARGS		16		/* max number of command args	*/
-#define CFG_BARGSIZE		CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+#define CONFIG_SYS_LONGHELP				/* undef to save memory		*/
+#define CONFIG_SYS_PROMPT		"# "		/* Monitor Command Prompt	*/
+#define CONFIG_SYS_CBSIZE		256		/* Console I/O Buffer Size	*/
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS		16		/* max number of command args	*/
+#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
 
-#define CFG_MEMTEST_START	PHYS_SDRAM_1
-#define CFG_MEMTEST_END		PHYS_SDRAM_1 + PHYS_SDRAM_1_SIZE - PHYS_SDRAM_1_RESERVED
+#define CONFIG_SYS_MEMTEST_START	PHYS_SDRAM_1
+#define CONFIG_SYS_MEMTEST_END		PHYS_SDRAM_1 + PHYS_SDRAM_1_SIZE - PHYS_SDRAM_1_RESERVED
 
-#undef	CFG_CLKS_IN_HZ		/* everything, incl board info, in Hz */
+#undef	CONFIG_SYS_CLKS_IN_HZ		/* everything, incl board info, in Hz */
 
 /* The 1510 has 3 timers, they can be driven by the RefClk (12Mhz) or by DPLL1.
  * This time is further subdivided by a local divisor.
  */
-#define CFG_TIMERBASE		OMAP1510_TIMER1_BASE
-#define CFG_PVT			7		/* 2^(pvt+1), divide by 256 */
-#define CFG_HZ			((CONFIG_SYS_CLK_FREQ)/(2 << CFG_PVT))
+#define CONFIG_SYS_TIMERBASE		OMAP1510_TIMER1_BASE
+#define CONFIG_SYS_PVT			7		/* 2^(pvt+1), divide by 256 */
+#define CONFIG_SYS_HZ			((CONFIG_SYS_CLK_FREQ)/(2 << CONFIG_SYS_PVT))
 
 #define OMAP5910_DPLL_DIV	1
 #define OMAP5910_DPLL_MUL	((CONFIG_SYS_CLK_FREQ * \
diff --git a/include/configs/walnut.h b/include/configs/walnut.h
index e19c5f348..630c0d3a3 100644
--- a/include/configs/walnut.h
+++ b/include/configs/walnut.h
@@ -76,31 +76,30 @@
 #define CONFIG_SPD_EEPROM      1       /* use SPD EEPROM for setup    */
 
 /*
- * If CFG_EXT_SERIAL_CLOCK, then the UART divisor is 1.
- * If CFG_405_UART_ERRATA_59, then UART divisor is 31.
- * Otherwise, UART divisor is determined by CPU Clock and CFG_BASE_BAUD value.
+ * If CONFIG_SYS_EXT_SERIAL_CLOCK, then the UART divisor is 1.
+ * If CONFIG_SYS_405_UART_ERRATA_59, then UART divisor is 31.
+ * Otherwise, UART divisor is determined by CPU Clock and CONFIG_SYS_BASE_BAUD value.
  * The Linux BASE_BAUD define should match this configuration.
  *    baseBaud = cpuClock/(uartDivisor*16)
- * If CFG_405_UART_ERRATA_59 and 200MHz CPU clock,
+ * If CONFIG_SYS_405_UART_ERRATA_59 and 200MHz CPU clock,
  * set Linux BASE_BAUD to 403200.
  */
 #undef	CONFIG_SERIAL_SOFTWARE_FIFO
-#undef	CFG_EXT_SERIAL_CLOCK	       /* external serial clock */
-#undef	CFG_405_UART_ERRATA_59	       /* 405GP/CR Rev. D silicon */
-#define CFG_BASE_BAUD	    691200
+#undef	CONFIG_SYS_EXT_SERIAL_CLOCK	       /* external serial clock */
+#undef	CONFIG_SYS_405_UART_ERRATA_59	       /* 405GP/CR Rev. D silicon */
+#define CONFIG_SYS_BASE_BAUD	    691200
 
 /*-----------------------------------------------------------------------
  * I2C stuff
  *-----------------------------------------------------------------------
  */
-#define CFG_I2C_SPEED		400000	/* I2C speed and slave address	*/
+#define CONFIG_SYS_I2C_SPEED		400000	/* I2C speed and slave address	*/
 
-#define CFG_I2C_MULTI_EEPROMS
-#define CFG_I2C_EEPROM_ADDR	(0xa8>>1)
-#define CFG_I2C_EEPROM_ADDR_LEN 1
-#define CFG_EEPROM_PAGE_WRITE_ENABLE
-#define CFG_EEPROM_PAGE_WRITE_BITS 3
-#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10
+#define CONFIG_SYS_I2C_MULTI_EEPROMS
+#define CONFIG_SYS_I2C_EEPROM_ADDR	(0xa8>>1)
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10
 
 /*-----------------------------------------------------------------------
  * PCI stuff
@@ -116,20 +115,20 @@
 					/* resource configuration	*/
 #define CONFIG_PCI_SCAN_SHOW		/* show pci devices on startup	*/
 
-#define CFG_PCI_SUBSYS_VENDORID 0x10e8	/* AMCC */
-#define CFG_PCI_SUBSYS_DEVICEID 0xcafe	/* Whatever */
-#define CFG_PCI_PTM1LA	0x00000000	/* point to sdram		*/
-#define CFG_PCI_PTM1MS	0x80000001	/* 2GB, enable hard-wired to 1	*/
-#define CFG_PCI_PTM1PCI 0x00000000	/* Host: use this pci address	*/
-#define CFG_PCI_PTM2LA	0x00000000	/* disabled			*/
-#define CFG_PCI_PTM2MS	0x00000000	/* disabled			*/
-#define CFG_PCI_PTM2PCI 0x04000000	/* Host: use this pci address	*/
+#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x10e8	/* AMCC */
+#define CONFIG_SYS_PCI_SUBSYS_DEVICEID 0xcafe	/* Whatever */
+#define CONFIG_SYS_PCI_PTM1LA	0x00000000	/* point to sdram		*/
+#define CONFIG_SYS_PCI_PTM1MS	0x80000001	/* 2GB, enable hard-wired to 1	*/
+#define CONFIG_SYS_PCI_PTM1PCI 0x00000000	/* Host: use this pci address	*/
+#define CONFIG_SYS_PCI_PTM2LA	0x00000000	/* disabled			*/
+#define CONFIG_SYS_PCI_PTM2MS	0x00000000	/* disabled			*/
+#define CONFIG_SYS_PCI_PTM2PCI 0x04000000	/* Host: use this pci address	*/
 
 /*-----------------------------------------------------------------------
  * Start addresses for the final memory configuration
  * (Set up by the startup code)
  */
-#define CFG_FLASH_BASE		0xFFF80000
+#define CONFIG_SYS_FLASH_BASE		0xFFF80000
 
 /*
  * Define here the location of the environment variables (FLASH or NVRAM).
@@ -137,49 +136,49 @@
  *	 supported for backward compatibility.
  */
 #if 1
-#define CFG_ENV_IS_IN_FLASH	1	/* use FLASH for environment vars	*/
+#define CONFIG_ENV_IS_IN_FLASH	1	/* use FLASH for environment vars	*/
 #else
-#define CFG_ENV_IS_IN_NVRAM	1	/* use NVRAM for environment vars	*/
+#define CONFIG_ENV_IS_IN_NVRAM	1	/* use NVRAM for environment vars	*/
 #endif
 
 /*-----------------------------------------------------------------------
  * FLASH organization
  */
-#define FLASH_BASE0_PRELIM	CFG_FLASH_BASE	/* FLASH bank #0		*/
+#define FLASH_BASE0_PRELIM	CONFIG_SYS_FLASH_BASE	/* FLASH bank #0		*/
 #define FLASH_BASE1_PRELIM	0		/* FLASH bank #1		*/
 
-#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
-#define CFG_MAX_FLASH_SECT	256	/* max number of sectors on one chip	*/
+#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
+#define CONFIG_SYS_MAX_FLASH_SECT	256	/* max number of sectors on one chip	*/
 
-#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
-#define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
+#define CONFIG_SYS_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
+#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
 
-#define CFG_FLASH_EMPTY_INFO		/* print 'E' for empty sector on flinfo */
+#define CONFIG_SYS_FLASH_EMPTY_INFO		/* print 'E' for empty sector on flinfo */
 
-#define CFG_FLASH_ADDR0		0x5555
-#define CFG_FLASH_ADDR1		0x2aaa
-#define CFG_FLASH_WORD_SIZE	unsigned char
+#define CONFIG_SYS_FLASH_ADDR0		0x5555
+#define CONFIG_SYS_FLASH_ADDR1		0x2aaa
+#define CONFIG_SYS_FLASH_WORD_SIZE	unsigned char
 
-#ifdef CFG_ENV_IS_IN_FLASH
-#define CFG_ENV_SECT_SIZE	0x10000		/* size of one complete sector	*/
-#define CFG_ENV_ADDR		(CFG_MONITOR_BASE-CFG_ENV_SECT_SIZE)
-#define CFG_ENV_SIZE		0x4000	/* Total Size of Environment Sector	*/
+#ifdef CONFIG_ENV_IS_IN_FLASH
+#define CONFIG_ENV_SECT_SIZE	0x10000		/* size of one complete sector	*/
+#define CONFIG_ENV_ADDR		(CONFIG_SYS_MONITOR_BASE-CONFIG_ENV_SECT_SIZE)
+#define CONFIG_ENV_SIZE		0x4000	/* Total Size of Environment Sector	*/
 
 /* Address and size of Redundant Environment Sector	*/
-#define CFG_ENV_ADDR_REDUND	(CFG_ENV_ADDR-CFG_ENV_SECT_SIZE)
-#define CFG_ENV_SIZE_REDUND	(CFG_ENV_SIZE)
-#endif /* CFG_ENV_IS_IN_FLASH */
+#define CONFIG_ENV_ADDR_REDUND	(CONFIG_ENV_ADDR-CONFIG_ENV_SECT_SIZE)
+#define CONFIG_ENV_SIZE_REDUND	(CONFIG_ENV_SIZE)
+#endif /* CONFIG_ENV_IS_IN_FLASH */
 
 /*-----------------------------------------------------------------------
  * NVRAM organization
  */
-#define CFG_NVRAM_BASE_ADDR	0xf0000000	/* NVRAM base address	*/
-#define CFG_NVRAM_SIZE		0x1ff8		/* NVRAM size	*/
+#define CONFIG_SYS_NVRAM_BASE_ADDR	0xf0000000	/* NVRAM base address	*/
+#define CONFIG_SYS_NVRAM_SIZE		0x1ff8		/* NVRAM size	*/
 
-#ifdef CFG_ENV_IS_IN_NVRAM
-#define CFG_ENV_SIZE		0x1000		/* Size of Environment vars	*/
-#define CFG_ENV_ADDR		\
-	(CFG_NVRAM_BASE_ADDR+CFG_NVRAM_SIZE-CFG_ENV_SIZE)	/* Env	*/
+#ifdef CONFIG_ENV_IS_IN_NVRAM
+#define CONFIG_ENV_SIZE		0x1000		/* Size of Environment vars	*/
+#define CONFIG_ENV_ADDR		\
+	(CONFIG_SYS_NVRAM_BASE_ADDR+CONFIG_SYS_NVRAM_SIZE-CONFIG_ENV_SIZE)	/* Env	*/
 #endif
 
 /*-----------------------------------------------------------------------
@@ -187,39 +186,39 @@
  */
 
 /* Memory Bank 0 (Flash Bank 0) initialization					*/
-#define CFG_EBC_PB0AP		0x9B015480
-#define CFG_EBC_PB0CR		0xFFF18000  /* BAS=0xFFF,BS=1MB,BU=R/W,BW=8bit	*/
+#define CONFIG_SYS_EBC_PB0AP		0x9B015480
+#define CONFIG_SYS_EBC_PB0CR		0xFFF18000  /* BAS=0xFFF,BS=1MB,BU=R/W,BW=8bit	*/
 
-#define CFG_EBC_PB1AP		0x02815480
-#define CFG_EBC_PB1CR		0xF0018000  /* BAS=0xF00,BS=1MB,BU=R/W,BW=8bit	*/
+#define CONFIG_SYS_EBC_PB1AP		0x02815480
+#define CONFIG_SYS_EBC_PB1CR		0xF0018000  /* BAS=0xF00,BS=1MB,BU=R/W,BW=8bit	*/
 
-#define CFG_EBC_PB2AP		0x04815A80
-#define CFG_EBC_PB2CR		0xF0118000  /* BAS=0xF01,BS=1MB,BU=R/W,BW=8bit	*/
+#define CONFIG_SYS_EBC_PB2AP		0x04815A80
+#define CONFIG_SYS_EBC_PB2CR		0xF0118000  /* BAS=0xF01,BS=1MB,BU=R/W,BW=8bit	*/
 
-#define CFG_EBC_PB3AP		0x01815280
-#define CFG_EBC_PB3CR		0xF0218000  /* BAS=0xF02,BS=1MB,BU=R/W,BW=8bit	*/
+#define CONFIG_SYS_EBC_PB3AP		0x01815280
+#define CONFIG_SYS_EBC_PB3CR		0xF0218000  /* BAS=0xF02,BS=1MB,BU=R/W,BW=8bit	*/
 
-#define CFG_EBC_PB7AP		0x01815280
-#define CFG_EBC_PB7CR		0xF0318000  /* BAS=0xF03,BS=1MB,BU=R/W,BW=8bit	*/
+#define CONFIG_SYS_EBC_PB7AP		0x01815280
+#define CONFIG_SYS_EBC_PB7CR		0xF0318000  /* BAS=0xF03,BS=1MB,BU=R/W,BW=8bit	*/
 
 /*-----------------------------------------------------------------------
  * External peripheral base address
  *-----------------------------------------------------------------------
  */
-#define CFG_KEY_REG_BASE_ADDR	0xF0100000
-#define CFG_IR_REG_BASE_ADDR	0xF0200000
-#define CFG_FPGA_REG_BASE_ADDR	0xF0300000
+#define CONFIG_SYS_KEY_REG_BASE_ADDR	0xF0100000
+#define CONFIG_SYS_IR_REG_BASE_ADDR	0xF0200000
+#define CONFIG_SYS_FPGA_REG_BASE_ADDR	0xF0300000
 
 /*-----------------------------------------------------------------------
  * Definitions for initial stack pointer and data area
  */
-#define CFG_INIT_DCACHE_CS	4	/* use cs # 4 for data cache memory    */
+#define CONFIG_SYS_INIT_DCACHE_CS	4	/* use cs # 4 for data cache memory    */
 
-#define CFG_INIT_RAM_ADDR	0x40000000  /* inside of SDRAM			   */
-#define CFG_INIT_RAM_END	0x2000	/* End of used area in RAM	       */
-#define CFG_GBL_DATA_SIZE      128  /* size in bytes reserved for initial data */
-#define CFG_GBL_DATA_OFFSET    (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_INIT_RAM_ADDR	0x40000000  /* inside of SDRAM			   */
+#define CONFIG_SYS_INIT_RAM_END	0x2000	/* End of used area in RAM	       */
+#define CONFIG_SYS_GBL_DATA_SIZE      128  /* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET    (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
 /*-----------------------------------------------------------------------
  * Definitions for Serial Presence Detect EEPROM address
diff --git a/include/configs/wepep250.h b/include/configs/wepep250.h
index f2efe9f41..b70a53139 100644
--- a/include/configs/wepep250.h
+++ b/include/configs/wepep250.h
@@ -69,22 +69,22 @@
 /*
  * General options for u-boot. Modify to save memory foot print
  */
-#define CFG_LONGHELP                                  /* undef saves memory  */
-#define CFG_PROMPT              "WEP> "               /* prompt string       */
-#define CFG_CBSIZE              256                   /* console I/O buffer  */
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* print buffer size   */
-#define CFG_MAXARGS             16                    /* max command args    */
-#define CFG_BARGSIZE            CFG_CBSIZE            /* boot args buf size  */
+#define CONFIG_SYS_LONGHELP                                  /* undef saves memory  */
+#define CONFIG_SYS_PROMPT              "WEP> "               /* prompt string       */
+#define CONFIG_SYS_CBSIZE              256                   /* console I/O buffer  */
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* print buffer size   */
+#define CONFIG_SYS_MAXARGS             16                    /* max command args    */
+#define CONFIG_SYS_BARGSIZE            CONFIG_SYS_CBSIZE            /* boot args buf size  */
 
-#define CFG_MEMTEST_START       0xa0400000            /* memtest test area   */
-#define CFG_MEMTEST_END         0xa0800000
+#define CONFIG_SYS_MEMTEST_START       0xa0400000            /* memtest test area   */
+#define CONFIG_SYS_MEMTEST_END         0xa0800000
 
-#undef  CFG_CLKS_IN_HZ                       /* use HZ for freq. display     */
+#undef  CONFIG_SYS_CLKS_IN_HZ                       /* use HZ for freq. display     */
 
-#define CFG_HZ                  3686400      /* incrementer freq: 3.6864 MHz */
-#define CFG_CPUSPEED            0x141        /* core clock - register value  */
+#define CONFIG_SYS_HZ                  3686400      /* incrementer freq: 3.6864 MHz */
+#define CONFIG_SYS_CPUSPEED            0x141        /* core clock - register value  */
 
-#define CFG_BAUDRATE_TABLE      { 9600, 19200, 38400, 57600, 115200 }
+#define CONFIG_SYS_BAUDRATE_TABLE      { 9600, 19200, 38400, 57600, 115200 }
 
 /*
  * Definitions related to passing arguments to kernel.
@@ -98,8 +98,8 @@
 /*
  * Malloc pool need to host env + 128 Kb reserve for other allocations.
  */
-#define CFG_MALLOC_LEN	  (CFG_ENV_SIZE + (128<<10) )
-#define CFG_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
+#define CONFIG_SYS_MALLOC_LEN	  (CONFIG_ENV_SIZE + (128<<10) )
+#define CONFIG_SYS_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
 
 #define CONFIG_STACKSIZE        (120<<10)      /* stack size */
 
@@ -121,8 +121,8 @@
 #define WEP_SDRAM_4            0xac000000        /* SDRAM bank #4           */
 #define WEP_SDRAM_4_SIZE       0x00000000        /* 0 MB                    */
 
-#define CFG_DRAM_BASE           0xa0000000
-#define CFG_DRAM_SIZE           0x02000000
+#define CONFIG_SYS_DRAM_BASE           0xa0000000
+#define CONFIG_SYS_DRAM_SIZE           0x02000000
 
 /* Uncomment used SDRAM chip */
 #define WEP_SDRAM_K4S281633
@@ -132,8 +132,8 @@
 /*
  * Configuration for FLASH memory
  */
-#define CFG_MAX_FLASH_BANKS	1	/* FLASH banks count (not chip count)*/
-#define CFG_MAX_FLASH_SECT	128	/* number of sector in FLASH bank    */
+#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* FLASH banks count (not chip count)*/
+#define CONFIG_SYS_MAX_FLASH_SECT	128	/* number of sector in FLASH bank    */
 #define WEP_FLASH_BUS_WIDTH	4	/* we use 32 bit FLASH memory...     */
 #define WEP_FLASH_INTERLEAVE	2	/* ... made of 2 chips */
 #define WEP_FLASH_BANK_SIZE  0x2000000  /* size of one flash bank*/
@@ -146,12 +146,12 @@
    is not so clear to me. In other words we can provide more informations
    to user, but this expects more complex flash handling we do not provide
    now.*/
-#undef  CFG_FLASH_CFI
+#undef  CONFIG_SYS_FLASH_CFI
 
-#define CFG_FLASH_ERASE_TOUT    (2*CFG_HZ)    /* timeout for Erase operation */
-#define CFG_FLASH_WRITE_TOUT    (2*CFG_HZ)    /* timeout for Write operation */
+#define CONFIG_SYS_FLASH_ERASE_TOUT    (2*CONFIG_SYS_HZ)    /* timeout for Erase operation */
+#define CONFIG_SYS_FLASH_WRITE_TOUT    (2*CONFIG_SYS_HZ)    /* timeout for Write operation */
 
-#define CFG_FLASH_BASE          WEP_FLASH_BASE
+#define CONFIG_SYS_FLASH_BASE          WEP_FLASH_BASE
 
 /*
  * This is setting for JFFS2 support in u-boot.
@@ -160,9 +160,9 @@
  * footprint.
  * NOTE: Enable CONFIG_CMD_JFFS2 for JFFS2 support.
  */
-#define CFG_JFFS2_FIRST_BANK		0
-#define CFG_JFFS2_FIRST_SECTOR		5
-#define CFG_JFFS2_NUM_BANKS		1
+#define CONFIG_SYS_JFFS2_FIRST_BANK		0
+#define CONFIG_SYS_JFFS2_FIRST_SECTOR		5
+#define CONFIG_SYS_JFFS2_NUM_BANKS		1
 
 /*
  * Environment setup. Definitions of monitor location and size with
@@ -176,11 +176,11 @@
  * env. has no sense to us.
  */
 
-#define CFG_MONITOR_BASE	PHYS_FLASH_1
-#define CFG_MONITOR_LEN		0x20000		/* 128kb ( 1 flash sector )  */
-#define CFG_ENV_IS_IN_FLASH	1
-#define CFG_ENV_ADDR		0x20000	        /* absolute address for now  */
-#define CFG_ENV_SIZE		0x2000
+#define CONFIG_SYS_MONITOR_BASE	PHYS_FLASH_1
+#define CONFIG_SYS_MONITOR_LEN		0x20000		/* 128kb ( 1 flash sector )  */
+#define CONFIG_ENV_IS_IN_FLASH	1
+#define CONFIG_ENV_ADDR		0x20000	        /* absolute address for now  */
+#define CONFIG_ENV_SIZE		0x2000
 
 #undef  CONFIG_ENV_OVERWRITE                    /* env is not writable now   */
 
@@ -189,6 +189,6 @@
  * one may expect. For instance loadb command do not cares :-)
  * So advice is - do not relay on this...
  */
-#define CFG_LOAD_ADDR        0x40000
+#define CONFIG_SYS_LOAD_ADDR        0x40000
 
 #endif  /* __CONFIG_H */
diff --git a/include/configs/xaeniax.h b/include/configs/xaeniax.h
index dc0ee0b22..324f03e24 100644
--- a/include/configs/xaeniax.h
+++ b/include/configs/xaeniax.h
@@ -62,7 +62,7 @@
 
 #define CONFIG_BAUDRATE		115200
 
-#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 } /* valid baudrates */
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 } /* valid baudrates */
 
 
 /*
@@ -109,37 +109,37 @@
  * Size of malloc() pool; this lives below the uppermost 128 KiB which are
  * used for the RAM copy of the uboot code
  */
-#define CFG_MALLOC_LEN	    (CFG_ENV_SIZE + 128*1024)
-#define CFG_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
+#define CONFIG_SYS_MALLOC_LEN	    (CONFIG_ENV_SIZE + 128*1024)
+#define CONFIG_SYS_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
 
 /*
  * Miscellaneous configurable options
  */
-#define CFG_LONGHELP				/* undef to save memory	*/
-#define CFG_HUSH_PARSER		1
+#define CONFIG_SYS_LONGHELP				/* undef to save memory	*/
+#define CONFIG_SYS_HUSH_PARSER		1
 
-#define CFG_PROMPT_HUSH_PS2	"> "
+#define CONFIG_SYS_PROMPT_HUSH_PS2	"> "
 
-#ifdef CFG_HUSH_PARSER
-#define CFG_PROMPT		"u-boot$ "	/* Monitor Command Prompt */
+#ifdef CONFIG_SYS_HUSH_PARSER
+#define CONFIG_SYS_PROMPT		"u-boot$ "	/* Monitor Command Prompt */
 #else
-#define CFG_PROMPT		"u-boot=> "	/* Monitor Command Prompt */
+#define CONFIG_SYS_PROMPT		"u-boot=> "	/* Monitor Command Prompt */
 #endif
-#define CFG_CBSIZE		256		/* Console I/O Buffer Size	*/
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define CFG_MAXARGS		16		/* max number of command args	*/
-#define CFG_BARGSIZE		CFG_CBSIZE	/* Boot Argument Buffer Size	*/
-#define CFG_DEVICE_NULLDEV	1
+#define CONFIG_SYS_CBSIZE		256		/* Console I/O Buffer Size	*/
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS		16		/* max number of command args	*/
+#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
+#define CONFIG_SYS_DEVICE_NULLDEV	1
 
-#define CFG_MEMTEST_START	0xa0400000	/* memtest works on	*/
-#define CFG_MEMTEST_END		0xa0800000	/* 4 ... 8 MB in DRAM	*/
+#define CONFIG_SYS_MEMTEST_START	0xa0400000	/* memtest works on	*/
+#define CONFIG_SYS_MEMTEST_END		0xa0800000	/* 4 ... 8 MB in DRAM	*/
 
-#undef	CFG_CLKS_IN_HZ				/* everything, incl board info, in Hz */
+#undef	CONFIG_SYS_CLKS_IN_HZ				/* everything, incl board info, in Hz */
 
-#define CFG_LOAD_ADDR		0xa1000000	/* default load address */
+#define CONFIG_SYS_LOAD_ADDR		0xa1000000	/* default load address */
 
-#define CFG_HZ			3686400		/* incrementer freq: 3.6864 MHz */
-#define CFG_CPUSPEED		0x141		/* set core clock to 400/200/100 MHz */
+#define CONFIG_SYS_HZ			3686400		/* incrementer freq: 3.6864 MHz */
+#define CONFIG_SYS_CPUSPEED		0x141		/* set core clock to 400/200/100 MHz */
 
 /*
  * Physical Memory Map
@@ -160,25 +160,25 @@
 #define PHYS_FLASH_BANK_SIZE	0x02000000 /* 32 MB Banks */
 #define PHYS_FLASH_SECT_SIZE	0x00040000 /* 256 KB sectors (x2) */
 
-#define CFG_DRAM_BASE		0xa0000000
-#define CFG_DRAM_SIZE		0x04000000
+#define CONFIG_SYS_DRAM_BASE		0xa0000000
+#define CONFIG_SYS_DRAM_SIZE		0x04000000
 
-#define CFG_FLASH_BASE		PHYS_FLASH_1
+#define CONFIG_SYS_FLASH_BASE		PHYS_FLASH_1
 
 /*
  * FLASH and environment organization
  */
-#define CFG_MAX_FLASH_BANKS	1    /* max number of memory banks		*/
-#define CFG_MAX_FLASH_SECT	128  /* max number of sectors on one chip    */
+#define CONFIG_SYS_MAX_FLASH_BANKS	1    /* max number of memory banks		*/
+#define CONFIG_SYS_MAX_FLASH_SECT	128  /* max number of sectors on one chip    */
 
 /* timeout values are in ticks */
-#define CFG_FLASH_ERASE_TOUT	(25*CFG_HZ) /* Timeout for Flash Erase */
-#define CFG_FLASH_WRITE_TOUT	(25*CFG_HZ) /* Timeout for Flash Write */
+#define CONFIG_SYS_FLASH_ERASE_TOUT	(25*CONFIG_SYS_HZ) /* Timeout for Flash Erase */
+#define CONFIG_SYS_FLASH_WRITE_TOUT	(25*CONFIG_SYS_HZ) /* Timeout for Flash Write */
 
 /* FIXME */
-#define CFG_ENV_IS_IN_FLASH	1
-#define CFG_ENV_ADDR		(PHYS_FLASH_1 + 0x40000)/* Addr of Environment Sector	*/
-#define CFG_ENV_SIZE		0x40000			/* Total Size of Environment Sector	*/
+#define CONFIG_ENV_IS_IN_FLASH	1
+#define CONFIG_ENV_ADDR		(PHYS_FLASH_1 + 0x40000)/* Addr of Environment Sector	*/
+#define CONFIG_ENV_SIZE		0x40000			/* Total Size of Environment Sector	*/
 
 /*
  * Stack sizes
@@ -235,9 +235,9 @@
  * GP82 == NSSPSFRM  is 1
  * GP83 == NSSPTXD   is 1
  */
-#define CFG_GPSR0_VAL		0x8320E420
-#define CFG_GPSR1_VAL		0x00FFAA82
-#define CFG_GPSR2_VAL		0x000DC000
+#define CONFIG_SYS_GPSR0_VAL		0x8320E420
+#define CONFIG_SYS_GPSR1_VAL		0x00FFAA82
+#define CONFIG_SYS_GPSR2_VAL		0x000DC000
 
 /*
  * GP03 == LANReset  is 0
@@ -250,9 +250,9 @@
  * GP30 == SDATA_OUT is 0
  * GP81 == NSSPCLK   is 0
  */
-#define CFG_GPCR0_VAL		0x40C31848
-#define CFG_GPCR1_VAL		0x00000000
-#define CFG_GPCR2_VAL		0x00020000
+#define CONFIG_SYS_GPCR0_VAL		0x40C31848
+#define CONFIG_SYS_GPCR1_VAL		0x00000000
+#define CONFIG_SYS_GPCR2_VAL		0x00020000
 
 /*
  * GP00 == CPUWakeUpUSB is input
@@ -340,9 +340,9 @@
  * GP83 == NSSPTXD   is output
  * GP84 == NSSPRXD   is input
  */
-#define CFG_GPDR0_VAL		0xD3E3FC68
-#define CFG_GPDR1_VAL		0xFCFFAB83
-#define CFG_GPDR2_VAL		0x000FFFFF
+#define CONFIG_SYS_GPDR0_VAL		0xD3E3FC68
+#define CONFIG_SYS_GPDR1_VAL		0xFCFFAB83
+#define CONFIG_SYS_GPDR2_VAL		0x000FFFFF
 
 /*
  * GP01 == GP reset is AF01
@@ -413,12 +413,12 @@
  * GP83 == NSSPTXD  is AF01
  * GP84 == NSSPRXD  is AF10
  */
-#define CFG_GAFR0_L_VAL		0x80000004
-#define CFG_GAFR0_U_VAL		0x595A801A
-#define CFG_GAFR1_L_VAL		0x699A9559
-#define CFG_GAFR1_U_VAL		0xAAA5AAAA
-#define CFG_GAFR2_L_VAL		0xAAAAAAAA
-#define CFG_GAFR2_U_VAL		0x00000256
+#define CONFIG_SYS_GAFR0_L_VAL		0x80000004
+#define CONFIG_SYS_GAFR0_U_VAL		0x595A801A
+#define CONFIG_SYS_GAFR1_L_VAL		0x699A9559
+#define CONFIG_SYS_GAFR1_U_VAL		0xAAA5AAAA
+#define CONFIG_SYS_GAFR2_L_VAL		0xAAAAAAAA
+#define CONFIG_SYS_GAFR2_U_VAL		0x00000256
 
 /*
  * clock settings
@@ -429,10 +429,10 @@
  * BFS = 0
  * SSS = 0
  */
-#define CFG_PSSR_VAL		0x00000030
+#define CONFIG_SYS_PSSR_VAL		0x00000030
 
-#define CFG_CKEN_VAL            0x00000080  /*  */
-#define CFG_ICMR_VAL            0x00000000  /* No interrupts enabled        */
+#define CONFIG_SYS_CKEN_VAL            0x00000080  /*  */
+#define CONFIG_SYS_ICMR_VAL            0x00000000  /* No interrupts enabled        */
 
 
 /*
@@ -454,7 +454,7 @@
  * [03]    0    - 32 Bit bus width
  * [02:00] 010  - burst OF 4 ROM or FLASH
 */
-#define CFG_MSC0_VAL		0x000023D2
+#define CONFIG_SYS_MSC0_VAL		0x000023D2
 
 /* This is the configuration for nCS2/3 -> USB controller, LAN
  * configuration for nCS3: LAN
@@ -472,7 +472,7 @@
  * [03]    1    - 16 Bit bus width
  * [02:00] 100  - variable latency I/O
  */
-#define CFG_MSC1_VAL		0x1224A26C
+#define CONFIG_SYS_MSC1_VAL		0x1224A26C
 
 /* This is the configuration for nCS4/5 -> LAN
  * configuration for nCS5:
@@ -490,7 +490,7 @@
  * [03]    0    - 32 Bit bus width
  * [02:00] 100  - variable latency I/O
  */
-#define CFG_MSC2_VAL		0x00001224
+#define CONFIG_SYS_MSC2_VAL		0x00001224
 
 /* MDCNFG: SDRAM Configuration Register
  *
@@ -518,7 +518,7 @@
  * [00]      1   - enable  SDRAM partition 0
  */
 /* use the configuration above but disable partition 0 */
-#define CFG_MDCNFG_VAL		0x00000AC9
+#define CONFIG_SYS_MDCNFG_VAL		0x00000AC9
 
 /* MDREFR: SDRAM Refresh Control Register
  *
@@ -539,7 +539,7 @@
  * [12]    0     - E0PIN: disable SDCKE0
  * [11:00] 000000011000 - (64ms/8192)*MemClkFreq/32 = 24
  */
-#define CFG_MDREFR_VAL		0x00138018 /* mh: was 0x00118018 */
+#define CONFIG_SYS_MDREFR_VAL		0x00138018 /* mh: was 0x00118018 */
 
 /* MDMRS: Mode Register Set Configuration Register
  *
@@ -554,18 +554,18 @@
  * [03]      0       - MDADD0: SDRAM0/1 burst Type. Fixed to sequential.
  * [02:00]   010     - MDBL0:  SDRAM0/1 burst Length. Fixed to 4.
  */
-#define CFG_MDMRS_VAL		0x00320032
+#define CONFIG_SYS_MDMRS_VAL		0x00320032
 
 /*
  * PCMCIA and CF Interfaces
  */
-#define CFG_MECR_VAL		0x00000000
-#define CFG_MCMEM0_VAL		0x00010504
-#define CFG_MCMEM1_VAL		0x00010504
-#define CFG_MCATT0_VAL		0x00010504
-#define CFG_MCATT1_VAL		0x00010504
-#define CFG_MCIO0_VAL		0x00004715
-#define CFG_MCIO1_VAL		0x00004715
+#define CONFIG_SYS_MECR_VAL		0x00000000
+#define CONFIG_SYS_MCMEM0_VAL		0x00010504
+#define CONFIG_SYS_MCMEM1_VAL		0x00010504
+#define CONFIG_SYS_MCATT0_VAL		0x00010504
+#define CONFIG_SYS_MCATT1_VAL		0x00010504
+#define CONFIG_SYS_MCIO0_VAL		0x00004715
+#define CONFIG_SYS_MCIO1_VAL		0x00004715
 
 
 #endif	/* __CONFIG_H */
diff --git a/include/configs/xilinx-ppc.h b/include/configs/xilinx-ppc.h
new file mode 100644
index 000000000..e7daa0771
--- /dev/null
+++ b/include/configs/xilinx-ppc.h
@@ -0,0 +1,136 @@
+/*
+ * (C) Copyright 2008
+ *  Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@uam.es
+ *  This work has been supported by: QTechnology  http://qtec.com/
+ *
+ *  (C) Copyright 2008
+ *  Georg Schardt <schardt@team-ctech.de>
+ *
+ *  This program is free software: you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation, either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef __CONFIG_XLX_H
+#define __CONFIG_XLX_H
+/*
+#define DEBUG
+#define ET_DEBUG
+*/
+
+/*Mem Map*/
+#define CONFIG_SYS_SDRAM_BASE		0x0
+#define CONFIG_SYS_MONITOR_BASE	TEXT_BASE
+#define CONFIG_SYS_MONITOR_LEN		(192 * 1024)
+#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + 128 * 1024)
+
+/*Cmd*/
+#include <config_cmd_default.h>
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_CACHE
+#define CONFIG_CMD_DIAG
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_IRQ
+#define CONFIG_CMD_REGINFO
+#undef CONFIG_CMD_JFFS2
+#undef CONFIG_JFFS2_CMDLINE
+#undef CONFIG_CMD_SPI
+#undef CONFIG_CMD_I2C
+#undef CONFIG_CMD_DTT
+#undef CONFIG_CMD_NET
+#undef CONFIG_CMD_PING
+#undef CONFIG_CMD_DHCP
+#undef CONFIG_CMD_EEPROM
+#undef CONFIG_CMD_IMLS
+
+/*Misc*/
+#define CONFIG_BOOTDELAY		5/* autoboot after 5 seconds     */
+#define CONFIG_SYS_LONGHELP		/* undef to save memory         */
+#if defined(CONFIG_CMD_KGDB)
+#define CONFIG_SYS_CBSIZE		1024/* Console I/O Buffer Size      */
+#else
+#define CONFIG_SYS_CBSIZE		256/* Console I/O Buffer Size      */
+#endif
+#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE +\
+					sizeof(CONFIG_SYS_PROMPT) + 16)
+#define CONFIG_SYS_MAXARGS		16
+					/* max number of command args   */
+#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE
+					/* Boot Argument Buffer Size */
+#define CONFIG_SYS_MEMTEST_START	0x00400000
+					/* memtest works on           */
+#define CONFIG_SYS_MEMTEST_END		0x00C00000
+					/* 4 ... 12 MB in DRAM        */
+#define CONFIG_SYS_LOAD_ADDR		0x00400000
+					/* default load address       */
+#define CONFIG_SYS_EXTBDINFO		1
+					/* Extended board_into (bd_t) */
+#define CONFIG_SYS_HZ			1000
+					/* decrementer freq: 1 ms ticks */
+#define CONFIG_CMDLINE_EDITING		/* add command line history     */
+#define CONFIG_AUTO_COMPLETE		/* add autocompletion support   */
+#define CONFIG_LOOPW			/* enable loopw command         */
+#define CONFIG_MX_CYCLIC		/* enable mdc/mwc commands      */
+#define CONFIG_ZERO_BOOTDELAY_CHECK	/* check for keypress on bootdelay==0 */
+#define CONFIG_VERSION_VARIABLE		/* include version env variable */
+#define CONFIG_SYS_CONSOLE_INFO_QUIET	/* don't print console @ startup */
+#define CONFIG_SYS_HUSH_PARSER		/* Use the HUSH parser          */
+#define	CONFIG_SYS_PROMPT_HUSH_PS2	"> "
+#define CONFIG_LOADS_ECHO		/* echo on for serial download  */
+#define CONFIG_SYS_LOADS_BAUD_CHANGE	/* allow baudrate change        */
+#define CONFIG_SYS_BOOTMAPSZ		(8 << 20)
+				/* Initial Memory map for Linux */
+
+/*Stack*/
+#define CONFIG_SYS_INIT_RAM_ADDR	0x800000/* Initial RAM address    */
+#define CONFIG_SYS_INIT_RAM_END		0x2000	/* End of used area in RAM  */
+#define CONFIG_SYS_GBL_DATA_SIZE	128	/* num bytes initial data   */
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END \
+				- CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
+/*Speed*/
+#define CONFIG_SYS_CLK_FREQ	XPAR_CORE_CLOCK_FREQ_HZ
+
+/*Flash*/
+#ifdef XPAR_FLASH_MEM0_BASEADDR
+#define	CONFIG_SYS_FLASH_BASE		XPAR_FLASH_MEM0_BASEADDR
+#define	CONFIG_SYS_FLASH_CFI		1
+#define	CONFIG_FLASH_CFI_DRIVER	1
+#define	CONFIG_SYS_FLASH_EMPTY_INFO	1
+#define	CONFIG_SYS_MAX_FLASH_BANKS	1
+#define	CONFIG_SYS_FLASH_PROTECTION
+#define CONFIG_CMD_JFFS2
+#define CONFIG_JFFS2_CMDLINE
+#else
+#define CONFIG_ENV_IS_NOWHERE
+#define CONFIG_SYS_NO_FLASH
+#endif
+
+/* serial communication */
+#ifdef XPAR_UARTLITE_0_BASEADDR
+#define CONFIG_XILINX_UARTLITE
+#define CONFIG_SERIAL_BASE		XPAR_UARTLITE_0_BASEADDR
+#define CONFIG_BAUDRATE			XPAR_UARTLITE_0_BAUDRATE
+#define CONFIG_SYS_BAUDRATE_TABLE	{ CONFIG_BAUDRATE }
+#else
+#ifdef XPAR_UARTNS550_0_BASEADDR
+#define CONFIG_SYS_NS16550
+#define CONFIG_SYS_NS16550_SERIAL
+#define CONFIG_SYS_NS16550_REG_SIZE	4
+#define CONFIG_CONS_INDEX		1
+#define CONFIG_SYS_NS16550_COM1		XPAR_UARTNS550_0_BASEADDR
+#define CONFIG_SYS_NS16550_CLK		XPAR_UARTNS550_0_CLOCK_FREQ_HZ
+#define CONFIG_BAUDRATE			115200
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 115200 }
+#endif
+#endif
+
+#endif						/* __CONFIG_H */
diff --git a/include/configs/xilinx-ppc405-generic.h b/include/configs/xilinx-ppc405-generic.h
new file mode 100644
index 000000000..5036c6254
--- /dev/null
+++ b/include/configs/xilinx-ppc405-generic.h
@@ -0,0 +1,58 @@
+/*
+ *
+ * (C) Copyright 2008
+ * Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@uam.es
+ * This work has been supported by: QTechnology http://qtec.com/
+ *
+ * (C) Copyright 2008
+ * Georg Schardt <schardt@team-ctech.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#ifndef __CONFIG_GEN_H
+#define __CONFIG_GEN_H
+
+#include "../board/xilinx/ppc405-generic/xparameters.h"
+
+/* sdram */
+#define CONFIG_SYS_SDRAM_SIZE_MB	256
+
+/* environment */
+#define CONFIG_ENV_IS_IN_FLASH		1
+#define CONFIG_ENV_SIZE			0x10000
+#define CONFIG_ENV_SECT_SIZE		0x10000
+#define CONFIG_SYS_ENV_OFFSET		0x3F0000
+#define CONFIG_ENV_ADDR		(CONFIG_SYS_FLASH_BASE+CONFIG_SYS_ENV_OFFSET)
+#define CONFIG_ENV_OVERWRITE		1
+
+/*Misc*/
+#define CONFIG_SYS_PROMPT	"xlx-ppc405:/# " /* Monitor Command Prompt */
+#define CONFIG_PREBOOT		"echo U-Boot is up and runnining;"
+
+/*Flash*/
+#define CONFIG_SYS_FLASH_BASE			XPAR_FLASH_MEM0_BASEADDR
+#define CONFIG_SYS_FLASH_SIZE		(32*1024*1024)
+#define CONFIG_SYS_MAX_FLASH_SECT	71
+#define CONFIG_SYS_FLASH_CFI		1
+#define CONFIG_FLASH_CFI_DRIVER		1
+#define MTDIDS_DEFAULT			"nor0=ppc405-flash"
+#define MTDPARTS_DEFAULT		"mtdpartsa=ppc405-flash:-(user)"
+
+#include <configs/xilinx-ppc405.h>
+#endif			/* __CONFIG_H */
diff --git a/cpu/arm926ejs/at91/ether.c b/include/configs/xilinx-ppc405.h
index 7e11fe4d8..d335f1e29 100644
--- a/cpu/arm926ejs/at91/ether.c
+++ b/include/configs/xilinx-ppc405.h
@@ -1,7 +1,11 @@
 /*
- * (C) Copyright 2007-2008
- * Stelian Pop <stelian.pop@leadtechdesign.com>
- * Lead Tech Design <www.leadtechdesign.com>
+ *
+ * (C) Copyright 2008
+ * Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@uam.es
+ * This work has been supported by: QTechnology http://qtec.com/
+ *
+ * (C) Copyright 2008
+ * Georg Schardt <schardt@team-ctech.de>
  *
  * See file CREDITS for list of people who contributed to this
  * project.
@@ -22,14 +26,14 @@
  * MA 02111-1307 USA
  */
 
-#include <common.h>
-#include <asm/arch/hardware.h>
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/* cpu parameter */
+#define CONFIG_405		1
+#define CONFIG_4xx		1
+#define CONFIG_XILINX_405	1
 
-extern int macb_eth_initialize(int id, void *regs, unsigned int phy_addr);
+#include <configs/xilinx-ppc.h>
 
-#if defined(CONFIG_MACB) && defined(CONFIG_CMD_NET)
-void at91sam9_eth_initialize(bd_t *bi)
-{
-	macb_eth_initialize(0, (void *)AT91_BASE_EMAC, 0x00);
-}
 #endif
diff --git a/include/configs/xilinx-ppc440-generic.h b/include/configs/xilinx-ppc440-generic.h
new file mode 100644
index 000000000..fc0f932aa
--- /dev/null
+++ b/include/configs/xilinx-ppc440-generic.h
@@ -0,0 +1,49 @@
+/*
+ * (C) Copyright 2008
+ *  Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@uam.es
+ *  This work has been supported by: QTechnology  http://qtec.com/
+ *  This program is free software: you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation, either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*CPU*/
+#define CONFIG_440			1
+#define CONFIG_XILINX_PPC440_GENERIC	1
+#include "../board/xilinx/ppc440-generic/xparameters.h"
+
+/*Mem Map*/
+#define CONFIG_SYS_SDRAM_SIZE_MB	256
+
+/*Env*/
+#define	CONFIG_ENV_IS_IN_FLASH	1
+#define	CONFIG_ENV_SIZE		0x20000
+#define	CONFIG_ENV_SECT_SIZE	0x20000
+#define CONFIG_ENV_OFFSET		0x340000
+#define CONFIG_ENV_ADDR		(XPAR_FLASH_MEM0_BASEADDR+CONFIG_ENV_OFFSET)
+
+/*Misc*/
+#define CONFIG_SYS_PROMPT		"board:/# "	/* Monitor Command Prompt    */
+#define CONFIG_PREBOOT		"echo U-Boot is up and runnining;"
+
+/*Flash*/
+#define	CONFIG_SYS_FLASH_SIZE		(32*1024*1024)
+#define	CONFIG_SYS_MAX_FLASH_SECT	259
+#define MTDIDS_DEFAULT		"nor0=ml507-flash"
+#define MTDPARTS_DEFAULT	"mtdparts=ml507-flash:-(user)"
+
+/*Generic Configs*/
+#include <configs/xilinx-ppc440.h>
+
+#endif						/* __CONFIG_H */
diff --git a/include/configs/xilinx-ppc440.h b/include/configs/xilinx-ppc440.h
new file mode 100644
index 000000000..6e938dcf4
--- /dev/null
+++ b/include/configs/xilinx-ppc440.h
@@ -0,0 +1,28 @@
+/*
+ * (C) Copyright 2008
+ *  Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@uam.es
+ *  This work has been supported by: QTechnology  http://qtec.com/
+ *  This program is free software: you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation, either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef __CONFIG_GEN_H
+#define __CONFIG_GEN_H
+
+/*CPU*/
+#define CONFIG_4xx		1
+#define CONFIG_440		1
+#define CONFIG_XILINX_440	1
+
+#include <configs/xilinx-ppc.h>
+
+#endif						/* __CONFIG_H */
diff --git a/include/configs/xm250.h b/include/configs/xm250.h
index bcd16ec5d..16af84500 100644
--- a/include/configs/xm250.h
+++ b/include/configs/xm250.h
@@ -41,8 +41,8 @@
  * used for the RAM copy of the uboot code
  *
  */
-#define CFG_MALLOC_LEN		(256*1024)
-#define CFG_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
+#define CONFIG_SYS_MALLOC_LEN		(256*1024)
+#define CONFIG_SYS_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
 
 /*
  * Hardware drivers
@@ -58,18 +58,18 @@
  * I2C bus
  */
 #define CONFIG_HARD_I2C			1
-#define CFG_I2C_SPEED			50000
-#define CFG_I2C_SLAVE			0xfe
+#define CONFIG_SYS_I2C_SPEED			50000
+#define CONFIG_SYS_I2C_SLAVE			0xfe
 
 #define CONFIG_RTC_PCF8563		1
-#define CFG_I2C_RTC_ADDR		0x51
+#define CONFIG_SYS_I2C_RTC_ADDR		0x51
 
-#define CFG_I2C_EEPROM_ADDR		0x58	/* A0 = 0 (hardwired)		*/
-#define CFG_EEPROM_PAGE_WRITE_BITS	4	/* 4 bits = 16 octets		*/
-#define CFG_EEPROM_PAGE_WRITE_DELAY_MS	10	/* between stop and start	*/
-#define CFG_I2C_EEPROM_ADDR_LEN		1	/* length of address		*/
-#define CFG_EEPROM_SIZE			2048	/* size in bytes		*/
-#undef	CFG_I2C_INIT_BOARD			/* board has no own init	*/
+#define CONFIG_SYS_I2C_EEPROM_ADDR		0x58	/* A0 = 0 (hardwired)		*/
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS	4	/* 4 bits = 16 octets		*/
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	10	/* between stop and start	*/
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN		1	/* length of address		*/
+#define CONFIG_SYS_EEPROM_SIZE			2048	/* size in bytes		*/
+#undef	CONFIG_SYS_I2C_INIT_BOARD			/* board has no own init	*/
 
 /*
  * select serial console configuration
@@ -107,26 +107,26 @@
 /*
  * Miscellaneous configurable options
  */
-#define CFG_LONGHELP				/* undef to save memory		*/
-#define CFG_PROMPT		"=> "		/* Monitor Command Prompt	*/
-#define CFG_CBSIZE		256		/* Console I/O Buffer Size	*/
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define CFG_MAXARGS		16		/* max number of command args	*/
-#define CFG_BARGSIZE		CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+#define CONFIG_SYS_LONGHELP				/* undef to save memory		*/
+#define CONFIG_SYS_PROMPT		"=> "		/* Monitor Command Prompt	*/
+#define CONFIG_SYS_CBSIZE		256		/* Console I/O Buffer Size	*/
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS		16		/* max number of command args	*/
+#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
 
-#define CFG_MEMTEST_START	0xa0400000	/* memtest works on		*/
-#define CFG_MEMTEST_END		0xa0800000	/* 4 ... 8 MB in DRAM		*/
+#define CONFIG_SYS_MEMTEST_START	0xa0400000	/* memtest works on		*/
+#define CONFIG_SYS_MEMTEST_END		0xa0800000	/* 4 ... 8 MB in DRAM		*/
 
-#undef	CFG_CLKS_IN_HZ		/* everything, incl board info, in Hz */
+#undef	CONFIG_SYS_CLKS_IN_HZ		/* everything, incl board info, in Hz */
 
-#define CFG_LOAD_ADDR		0xa3000000	/* default load address */
+#define CONFIG_SYS_LOAD_ADDR		0xa3000000	/* default load address */
 
-#define CFG_HZ			3686400		/* incrementer freq: 3.6864 MHz */
-#define CFG_CPUSPEED		0x161		/* set core clock to 400/400/100 MHz */
+#define CONFIG_SYS_HZ			3686400		/* incrementer freq: 3.6864 MHz */
+#define CONFIG_SYS_CPUSPEED		0x161		/* set core clock to 400/400/100 MHz */
 
 						/* valid baudrates */
 
-#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
 
 /*
  * Definitions related to passing arguments to kernel.
@@ -166,29 +166,29 @@
 #define PHYS_FLASH_BANK_SIZE	0x01000000 /* 16 MB Banks	*/
 #define PHYS_FLASH_SECT_SIZE	0x00040000 /* 256 KB sectors (x2) */
 
-#define CFG_DRAM_BASE		0xa0000000
-#define CFG_DRAM_SIZE		0x04000000
+#define CONFIG_SYS_DRAM_BASE		0xa0000000
+#define CONFIG_SYS_DRAM_SIZE		0x04000000
 
-#define CFG_FLASH_BASE		PHYS_FLASH_1
+#define CONFIG_SYS_FLASH_BASE		PHYS_FLASH_1
 
 /*
  * FLASH and environment organization
  */
-#define CFG_MAX_FLASH_BANKS	1     /* max number of memory banks		*/
-#define CFG_MAX_FLASH_SECT	128   /* max number of sectors on one chip	*/
+#define CONFIG_SYS_MAX_FLASH_BANKS	1     /* max number of memory banks		*/
+#define CONFIG_SYS_MAX_FLASH_SECT	128   /* max number of sectors on one chip	*/
 
 /* timeout values are in ticks */
-#define CFG_FLASH_ERASE_TOUT	(2*CFG_HZ)	/* Timeout for Flash Erase	*/
-#define CFG_FLASH_WRITE_TOUT	(2*CFG_HZ)	/* Timeout for Flash Write	*/
-#define CFG_FLASH_LOCK_TOUT	(2*CFG_HZ)	/* Timeout for Flash Set Lock Bit */
-#define CFG_FLASH_UNLOCK_TOUT	(2*CFG_HZ)	/* Timeout for Flash Clear Lock Bits */
-#define CFG_FLASH_PROTECTION			/* "Real" (hardware) sectors protection */
-
-#define CFG_ENV_IS_IN_FLASH	1
-#define CFG_ENV_ADDR		(PHYS_FLASH_1 + 0x40000)	/* Addr of Environment Sector	*/
-#define CFG_ENV_SIZE		0x4000
-#define CFG_ENV_SECT_SIZE	0x40000				/* Size of the Environment Sector	*/
-#define CFG_MONITOR_LEN		0x20000				/* 128 KiB */
+#define CONFIG_SYS_FLASH_ERASE_TOUT	(2*CONFIG_SYS_HZ)	/* Timeout for Flash Erase	*/
+#define CONFIG_SYS_FLASH_WRITE_TOUT	(2*CONFIG_SYS_HZ)	/* Timeout for Flash Write	*/
+#define CONFIG_SYS_FLASH_LOCK_TOUT	(2*CONFIG_SYS_HZ)	/* Timeout for Flash Set Lock Bit */
+#define CONFIG_SYS_FLASH_UNLOCK_TOUT	(2*CONFIG_SYS_HZ)	/* Timeout for Flash Clear Lock Bits */
+#define CONFIG_SYS_FLASH_PROTECTION			/* "Real" (hardware) sectors protection */
+
+#define CONFIG_ENV_IS_IN_FLASH	1
+#define CONFIG_ENV_ADDR		(PHYS_FLASH_1 + 0x40000)	/* Addr of Environment Sector	*/
+#define CONFIG_ENV_SIZE		0x4000
+#define CONFIG_ENV_SECT_SIZE	0x40000				/* Size of the Environment Sector	*/
+#define CONFIG_SYS_MONITOR_LEN		0x20000				/* 128 KiB */
 
 /******************************************************************************
  *
@@ -287,38 +287,38 @@
  *
  */
 /* Pin direction control */
-#define CFG_GPDR0_VAL	    0xd3808000
-#define CFG_GPDR1_VAL	    0xfcffab83
-#define CFG_GPDR2_VAL	    0x0001ffff
+#define CONFIG_SYS_GPDR0_VAL	    0xd3808000
+#define CONFIG_SYS_GPDR1_VAL	    0xfcffab83
+#define CONFIG_SYS_GPDR2_VAL	    0x0001ffff
 /* Set and Clear registers */
-#define CFG_GPSR0_VAL	    0x00008000
-#define CFG_GPSR1_VAL	    0x00ff0002
-#define CFG_GPSR2_VAL	    0x0001c000
-#define CFG_GPCR0_VAL	    0x00000000
-#define CFG_GPCR1_VAL	    0x00000000
-#define CFG_GPCR2_VAL	    0x00000000
+#define CONFIG_SYS_GPSR0_VAL	    0x00008000
+#define CONFIG_SYS_GPSR1_VAL	    0x00ff0002
+#define CONFIG_SYS_GPSR2_VAL	    0x0001c000
+#define CONFIG_SYS_GPCR0_VAL	    0x00000000
+#define CONFIG_SYS_GPCR1_VAL	    0x00000000
+#define CONFIG_SYS_GPCR2_VAL	    0x00000000
 /* Edge detect registers (these are set by the kernel) */
-#define CFG_GRER0_VAL	    0x00002180
-#define CFG_GRER1_VAL	    0x00000000
-#define CFG_GRER2_VAL	    0x00000000
-#define CFG_GFER0_VAL	    0x000043e0
-#define CFG_GFER1_VAL	    0x00000000
-#define CFG_GFER2_VAL	    0x00000000
+#define CONFIG_SYS_GRER0_VAL	    0x00002180
+#define CONFIG_SYS_GRER1_VAL	    0x00000000
+#define CONFIG_SYS_GRER2_VAL	    0x00000000
+#define CONFIG_SYS_GFER0_VAL	    0x000043e0
+#define CONFIG_SYS_GFER1_VAL	    0x00000000
+#define CONFIG_SYS_GFER2_VAL	    0x00000000
 /* Alternate function registers */
-#define CFG_GAFR0_L_VAL	    0x80000004
-#define CFG_GAFR0_U_VAL	    0x595a8010
-#define CFG_GAFR1_L_VAL	    0x699a9559
-#define CFG_GAFR1_U_VAL	    0xaaa5aaaa
-#define CFG_GAFR2_L_VAL	    0xaaaaaaaa
-#define CFG_GAFR2_U_VAL	    0x00000002
+#define CONFIG_SYS_GAFR0_L_VAL	    0x80000004
+#define CONFIG_SYS_GAFR0_U_VAL	    0x595a8010
+#define CONFIG_SYS_GAFR1_L_VAL	    0x699a9559
+#define CONFIG_SYS_GAFR1_U_VAL	    0xaaa5aaaa
+#define CONFIG_SYS_GAFR2_L_VAL	    0xaaaaaaaa
+#define CONFIG_SYS_GAFR2_U_VAL	    0x00000002
 
 /*
  * Clocks, power control and interrupts
  */
-#define CFG_PSSR_VAL	    0x00000030
-#define CFG_CCCR_VAL	    0x00000161	/* 100 MHz memory, 400 MHz CPU, 400 Turbo  */
-#define CFG_CKEN_VAL	    0x000141ec	/* FFUART and STUART enabled	*/
-#define CFG_ICMR_VAL	    0x00000000	/* No interrupts enabled	*/
+#define CONFIG_SYS_PSSR_VAL	    0x00000030
+#define CONFIG_SYS_CCCR_VAL	    0x00000161	/* 100 MHz memory, 400 MHz CPU, 400 Turbo  */
+#define CONFIG_SYS_CKEN_VAL	    0x000141ec	/* FFUART and STUART enabled	*/
+#define CONFIG_SYS_ICMR_VAL	    0x00000000	/* No interrupts enabled	*/
 
 /* FIXME
  *
@@ -331,23 +331,23 @@
  * Memory settings
  *
  */
-#define CFG_MSC0_VAL	    0x122423f0	/* FLASH   / LAN	    (cs0)/(cS1)	  */
-#define CFG_MSC1_VAL	    0x35f4aa4c	/* USB	   / ST3+ST5	    (cs2)/(cS3)	  */
-#define CFG_MSC2_VAL	    0x35f435fc	/* IDE	   / BCR + WatchDog (cs4)/(cS5)	  */
-#define CFG_MDCNFG_VAL	    0x000009c9
-#define CFG_MDMRS_VAL	    0x00220022
-#define CFG_MDREFR_VAL	    0x000da018	/* Initial setting, individual bits set in lowlevel_init.S */
+#define CONFIG_SYS_MSC0_VAL	    0x122423f0	/* FLASH   / LAN	    (cs0)/(cS1)	  */
+#define CONFIG_SYS_MSC1_VAL	    0x35f4aa4c	/* USB	   / ST3+ST5	    (cs2)/(cS3)	  */
+#define CONFIG_SYS_MSC2_VAL	    0x35f435fc	/* IDE	   / BCR + WatchDog (cs4)/(cS5)	  */
+#define CONFIG_SYS_MDCNFG_VAL	    0x000009c9
+#define CONFIG_SYS_MDMRS_VAL	    0x00220022
+#define CONFIG_SYS_MDREFR_VAL	    0x000da018	/* Initial setting, individual bits set in lowlevel_init.S */
 
 /*
  * PCMCIA and CF Interfaces (NOT USED, these values from lubbock init)
  */
-#define CFG_MECR_VAL	      0x00000000
-#define CFG_MCMEM0_VAL	      0x00010504
-#define CFG_MCMEM1_VAL	      0x00010504
-#define CFG_MCATT0_VAL	      0x00010504
-#define CFG_MCATT1_VAL	      0x00010504
-#define CFG_MCIO0_VAL	      0x00004715
-#define CFG_MCIO1_VAL	      0x00004715
+#define CONFIG_SYS_MECR_VAL	      0x00000000
+#define CONFIG_SYS_MCMEM0_VAL	      0x00010504
+#define CONFIG_SYS_MCMEM1_VAL	      0x00010504
+#define CONFIG_SYS_MCATT0_VAL	      0x00010504
+#define CONFIG_SYS_MCATT1_VAL	      0x00010504
+#define CONFIG_SYS_MCIO0_VAL	      0x00004715
+#define CONFIG_SYS_MCIO1_VAL	      0x00004715
 
 /* Board specific defines */
 
diff --git a/include/configs/xsengine.h b/include/configs/xsengine.h
index 4d1bdd7b1..b72741375 100644
--- a/include/configs/xsengine.h
+++ b/include/configs/xsengine.h
@@ -35,11 +35,11 @@
 #define CONFIG_DOS_PARTITION		1
 #define BOARD_LATE_INIT			1
 #undef  CONFIG_USE_IRQ					/* we don't need IRQ/FIQ stuff */
-#define CFG_HZ				3686400		/* incrementer freq: 3.6864 MHz */
+#define CONFIG_SYS_HZ				3686400		/* incrementer freq: 3.6864 MHz */
 
 #undef  CONFIG_USE_IRQ					/* we don't need IRQ/FIQ stuff */
-#define CFG_HZ				3686400		/* incrementer freq: 3.6864 MHz */
-#define CFG_CPUSPEED			0x161           /* set core clock to 400/200/100 MHz */
+#define CONFIG_SYS_HZ				3686400		/* incrementer freq: 3.6864 MHz */
+#define CONFIG_SYS_CPUSPEED			0x161           /* set core clock to 400/200/100 MHz */
 
 #define CONFIG_NR_DRAM_BANKS		1		/* we have 1 bank of DRAM */
 #define PHYS_SDRAM_1			0xa0000000	/* SDRAM Bank #1 */
@@ -50,16 +50,16 @@
 #define PHYS_SDRAM_3_SIZE		0x00000000	/* 0 MB */
 #define PHYS_SDRAM_4			0xac000000	/* SDRAM Bank #4 */
 #define PHYS_SDRAM_4_SIZE		0x00000000	/* 0 MB */
-#define CFG_DRAM_BASE			0xa0000000
-#define CFG_DRAM_SIZE			0x04000000
+#define CONFIG_SYS_DRAM_BASE			0xa0000000
+#define CONFIG_SYS_DRAM_SIZE			0x04000000
 
 /* FLASH organization */
-#define CFG_MAX_FLASH_BANKS		1		/* max number of memory banks           */
-#define CFG_MAX_FLASH_SECT		128		/* max number of sectors on one chip    */
+#define CONFIG_SYS_MAX_FLASH_BANKS		1		/* max number of memory banks           */
+#define CONFIG_SYS_MAX_FLASH_SECT		128		/* max number of sectors on one chip    */
 #define PHYS_FLASH_1			0x00000000	/* Flash Bank #1 */
 #define PHYS_FLASH_2			0x00000000	/* Flash Bank #2 */
 #define PHYS_FLASH_SECT_SIZE		0x00020000	/* 127 KB sectors */
-#define CFG_FLASH_BASE			PHYS_FLASH_1
+#define CONFIG_SYS_FLASH_BASE			PHYS_FLASH_1
 
 /*
  * JFFS2 partitions
@@ -80,18 +80,18 @@
 
 /* Environment settings */
 #define CONFIG_ENV_OVERWRITE
-#define CFG_ENV_IS_IN_FLASH             1
-#define CFG_ENV_ADDR                    (PHYS_FLASH_1 + 0x40000)	/* Addr of Environment Sector (after monitor)*/
-#define CFG_ENV_SECT_SIZE               PHYS_FLASH_SECT_SIZE		/* Size of the Environment Sector */
-#define CFG_ENV_SIZE                    0x4000				/* 16kB Total Size of Environment Sector */
+#define CONFIG_ENV_IS_IN_FLASH             1
+#define CONFIG_ENV_ADDR                    (PHYS_FLASH_1 + 0x40000)	/* Addr of Environment Sector (after monitor)*/
+#define CONFIG_ENV_SECT_SIZE               PHYS_FLASH_SECT_SIZE		/* Size of the Environment Sector */
+#define CONFIG_ENV_SIZE                    0x4000				/* 16kB Total Size of Environment Sector */
 
 /* timeout values are in ticks */
-#define CFG_FLASH_ERASE_TOUT		(75*CFG_HZ)	/* Timeout for Flash Erase */
-#define CFG_FLASH_WRITE_TOUT		(50*CFG_HZ)	/* Timeout for Flash Write */
+#define CONFIG_SYS_FLASH_ERASE_TOUT		(75*CONFIG_SYS_HZ)	/* Timeout for Flash Erase */
+#define CONFIG_SYS_FLASH_WRITE_TOUT		(50*CONFIG_SYS_HZ)	/* Timeout for Flash Write */
 
 /* Size of malloc() pool */
-#define CFG_MALLOC_LEN			(CFG_ENV_SIZE + 256*1024)
-#define CFG_GBL_DATA_SIZE		128		/* size in bytes reserved for initial data */
+#define CONFIG_SYS_MALLOC_LEN			(CONFIG_ENV_SIZE + 256*1024)
+#define CONFIG_SYS_GBL_DATA_SIZE		128		/* size in bytes reserved for initial data */
 
 /* Hardware drivers */
 #define CONFIG_DRIVER_SMC91111
@@ -133,20 +133,20 @@
 #define CONFIG_CMDLINE_TAG
 
 /* Miscellaneous configurable options */
-#define CFG_HUSH_PARSER			1
-#define CFG_PROMPT_HUSH_PS2		"> "
-#define CFG_LONGHELP								/* undef to save memory	*/
-#define CFG_PROMPT			"XS-Engine u-boot> "			/* Monitor Command Prompt */
-#define CFG_CBSIZE			256					/* Console I/O Buffer Size */
-#define CFG_PBSIZE			(CFG_CBSIZE+sizeof(CFG_PROMPT)+16)	/* Print Buffer Size */
-#define CFG_MAXARGS			16					/* max number of command args */
-#define CFG_BARGSIZE			CFG_CBSIZE				/* Boot Argument Buffer Size */
-#define CFG_MEMTEST_START		0xA0400000				/* memtest works on     */
-#define CFG_MEMTEST_END			0xA0800000				/* 4 ... 8 MB in DRAM   */
-#undef  CFG_CLKS_IN_HZ								/* everything, incl board info, in Hz */
-#define CFG_BAUDRATE_TABLE		{ 9600, 19200, 38400, 57600, 115200 }	/* valid baudrates */
-#define CFG_MMC_BASE			0xF0000000
-#define CFG_LOAD_ADDR			0xA0000000				/* load kernel to this address   */
+#define CONFIG_SYS_HUSH_PARSER			1
+#define CONFIG_SYS_PROMPT_HUSH_PS2		"> "
+#define CONFIG_SYS_LONGHELP								/* undef to save memory	*/
+#define CONFIG_SYS_PROMPT			"XS-Engine u-boot> "			/* Monitor Command Prompt */
+#define CONFIG_SYS_CBSIZE			256					/* Console I/O Buffer Size */
+#define CONFIG_SYS_PBSIZE			(CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)	/* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS			16					/* max number of command args */
+#define CONFIG_SYS_BARGSIZE			CONFIG_SYS_CBSIZE				/* Boot Argument Buffer Size */
+#define CONFIG_SYS_MEMTEST_START		0xA0400000				/* memtest works on     */
+#define CONFIG_SYS_MEMTEST_END			0xA0800000				/* 4 ... 8 MB in DRAM   */
+#undef  CONFIG_SYS_CLKS_IN_HZ								/* everything, incl board info, in Hz */
+#define CONFIG_SYS_BAUDRATE_TABLE		{ 9600, 19200, 38400, 57600, 115200 }	/* valid baudrates */
+#define CONFIG_SYS_MMC_BASE			0xF0000000
+#define CONFIG_SYS_LOAD_ADDR			0xA0000000				/* load kernel to this address   */
 
 /* Stack sizes - The stack sizes are set up in start.S using the settings below */
 #define CONFIG_STACKSIZE		(128*1024)	/* regular stack */
@@ -156,53 +156,53 @@
 #endif
 
 /* GP set register */
-#define CFG_GPSR0_VAL			0x0000A000	/* CS1, PROG(FPGA) */
-#define CFG_GPSR1_VAL			0x00020000	/* nPWE */
-#define CFG_GPSR2_VAL			0x0000C000	/* CS2, CS3 */
+#define CONFIG_SYS_GPSR0_VAL			0x0000A000	/* CS1, PROG(FPGA) */
+#define CONFIG_SYS_GPSR1_VAL			0x00020000	/* nPWE */
+#define CONFIG_SYS_GPSR2_VAL			0x0000C000	/* CS2, CS3 */
 
 /* GP clear register */
-#define CFG_GPCR0_VAL			0x00000000
-#define CFG_GPCR1_VAL			0x00000000
-#define CFG_GPCR2_VAL			0x00000000
+#define CONFIG_SYS_GPCR0_VAL			0x00000000
+#define CONFIG_SYS_GPCR1_VAL			0x00000000
+#define CONFIG_SYS_GPCR2_VAL			0x00000000
 
 /* GP direction register */
-#define CFG_GPDR0_VAL			0x0000A000	/* CS1, PROG(FPGA) */
-#define CFG_GPDR1_VAL			0x00022A80	/* nPWE, FFUART + BTUART pins */
-#define CFG_GPDR2_VAL			0x0000C000	/* CS2, CS3 */
+#define CONFIG_SYS_GPDR0_VAL			0x0000A000	/* CS1, PROG(FPGA) */
+#define CONFIG_SYS_GPDR1_VAL			0x00022A80	/* nPWE, FFUART + BTUART pins */
+#define CONFIG_SYS_GPDR2_VAL			0x0000C000	/* CS2, CS3 */
 
 /* GP rising edge detect register */
-#define CFG_GRER0_VAL			0x00000000
-#define CFG_GRER1_VAL			0x00000000
-#define CFG_GRER2_VAL			0x00000000
+#define CONFIG_SYS_GRER0_VAL			0x00000000
+#define CONFIG_SYS_GRER1_VAL			0x00000000
+#define CONFIG_SYS_GRER2_VAL			0x00000000
 
 /* GP falling edge detect register */
-#define CFG_GFER0_VAL			0x00000000
-#define CFG_GFER1_VAL			0x00000000
-#define CFG_GFER2_VAL			0x00000000
+#define CONFIG_SYS_GFER0_VAL			0x00000000
+#define CONFIG_SYS_GFER1_VAL			0x00000000
+#define CONFIG_SYS_GFER2_VAL			0x00000000
 
 /* GP alternate function register */
-#define CFG_GAFR0_L_VAL			0x80000000	/* CS1 */
-#define CFG_GAFR0_U_VAL			0x00000010	/* RDY */
-#define CFG_GAFR1_L_VAL			0x09988050	/* FFUART + BTUART pins */
-#define CFG_GAFR1_U_VAL			0x00000008	/* nPWE */
-#define CFG_GAFR2_L_VAL			0xA0000000	/* CS2, CS3 */
-#define CFG_GAFR2_U_VAL			0x00000000
-
-#define CFG_PSSR_VAL			0x00000020	/* Power manager sleep status */
-#define CFG_CCCR_VAL			0x00000161	/* 100 MHz memory, 400 MHz CPU  */
-#define CFG_CKEN_VAL			0x000000C0	/* BTUART and FFUART enabled    */
-#define CFG_ICMR_VAL			0x00000000	/* No interrupts enabled        */
+#define CONFIG_SYS_GAFR0_L_VAL			0x80000000	/* CS1 */
+#define CONFIG_SYS_GAFR0_U_VAL			0x00000010	/* RDY */
+#define CONFIG_SYS_GAFR1_L_VAL			0x09988050	/* FFUART + BTUART pins */
+#define CONFIG_SYS_GAFR1_U_VAL			0x00000008	/* nPWE */
+#define CONFIG_SYS_GAFR2_L_VAL			0xA0000000	/* CS2, CS3 */
+#define CONFIG_SYS_GAFR2_U_VAL			0x00000000
+
+#define CONFIG_SYS_PSSR_VAL			0x00000020	/* Power manager sleep status */
+#define CONFIG_SYS_CCCR_VAL			0x00000161	/* 100 MHz memory, 400 MHz CPU  */
+#define CONFIG_SYS_CKEN_VAL			0x000000C0	/* BTUART and FFUART enabled    */
+#define CONFIG_SYS_ICMR_VAL			0x00000000	/* No interrupts enabled        */
 
 /* Memory settings */
-#define CFG_MSC0_VAL			0x25F425F0
+#define CONFIG_SYS_MSC0_VAL			0x25F425F0
 
 /* MDCNFG: SDRAM Configuration Register */
-#define CFG_MDCNFG_VAL			0x000009C9
+#define CONFIG_SYS_MDCNFG_VAL			0x000009C9
 
 /* MDREFR: SDRAM Refresh Control Register */
-#define CFG_MDREFR_VAL			0x00018018
+#define CONFIG_SYS_MDREFR_VAL			0x00018018
 
 /* MDMRS: Mode Register Set Configuration Register */
-#define CFG_MDMRS_VAL			0x00220022
+#define CONFIG_SYS_MDMRS_VAL			0x00220022
 
 #endif	/* __CONFIG_H */
diff --git a/include/configs/xupv2p.h b/include/configs/xupv2p.h
deleted file mode 100644
index 570d6a802..000000000
--- a/include/configs/xupv2p.h
+++ /dev/null
@@ -1,227 +0,0 @@
-/*
- * (C) Copyright 2007-2008 Michal Simek
- *
- * Michal SIMEK <monstr@monstr.eu>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#include "../board/xilinx/xupv2p/xparameters.h"
-
-#define	CONFIG_MICROBLAZE	1	/* MicroBlaze CPU */
-#define	CONFIG_XUPV2P		1
-
-/* uart */
-#ifdef XILINX_UARTLITE_BASEADDR
-#define	CONFIG_XILINX_UARTLITE
-#define	CONFIG_SERIAL_BASE	XILINX_UARTLITE_BASEADDR
-#define	CONFIG_BAUDRATE		XILINX_UARTLITE_BAUDRATE
-#define	CFG_BAUDRATE_TABLE	{ CONFIG_BAUDRATE }
-#else
-#ifdef XILINX_UART16550_BASEADDR
-#define CFG_NS16550
-#define CFG_NS16550_SERIAL
-#define CFG_NS16550_REG_SIZE	4
-#define CONFIG_CONS_INDEX	1
-#define CFG_NS16550_COM1	XILINX_UART16550_BASEADDR
-#define CFG_NS16550_CLK		XILINX_UART16550_CLOCK_HZ
-#define	CONFIG_BAUDRATE		115200
-#define	CFG_BAUDRATE_TABLE	{ 9600, 115200 }
-#endif
-#endif
-
-/*
- * setting reset address
- *
- * TEXT_BASE is set to place, where the U-BOOT run in RAM, but
- * if you want to store U-BOOT in flash, set CFG_RESET_ADDRESS
- * to FLASH memory and after loading bitstream jump to FLASH.
- * U-BOOT auto-relocate to TEXT_BASE. After RESET command Microblaze
- * jump to CFG_RESET_ADDRESS where is the original U-BOOT code.
- */
-/* #define	CFG_RESET_ADDRESS	0x36000000 */
-
-/* ethernet */
-#ifdef XILINX_EMAC_BASEADDR
-#define CONFIG_XILINX_EMAC	1
-#define CFG_ENET
-#else
-#ifdef XILINX_EMACLITE_BASEADDR
-#define CONFIG_XILINX_EMACLITE	1
-#define CFG_ENET
-#endif
-#endif
-#undef ET_DEBUG
-
-/* gpio */
-#ifdef XILINX_GPIO_BASEADDR
-#define	CFG_GPIO_0		1
-#define	CFG_GPIO_0_ADDR		XILINX_GPIO_BASEADDR
-#endif
-
-/* interrupt controller */
-#ifdef XILINX_INTC_BASEADDR
-#define	CFG_INTC_0		1
-#define	CFG_INTC_0_ADDR		XILINX_INTC_BASEADDR
-#define	CFG_INTC_0_NUM		XILINX_INTC_NUM_INTR_INPUTS
-#endif
-
-/* timer */
-#ifdef XILINX_TIMER_BASEADDR
-#if (XILINX_TIMER_IRQ != -1)
-#define	CFG_TIMER_0		1
-#define	CFG_TIMER_0_ADDR	XILINX_TIMER_BASEADDR
-#define	CFG_TIMER_0_IRQ		XILINX_TIMER_IRQ
-#define	FREQUENCE		XILINX_CLOCK_FREQ
-#define	CFG_TIMER_0_PRELOAD	( FREQUENCE/1000 )
-#endif
-#else
-#ifdef XILINX_CLOCK_FREQ
-#define	CONFIG_XILINX_CLOCK_FREQ	XILINX_CLOCK_FREQ
-#else
-#error BAD CLOCK FREQ
-#endif
-#endif
-/*
- * memory layout - Example
- * TEXT_BASE = 0x3600_0000;
- * CFG_SRAM_BASE = 0x3000_0000;
- * CFG_SRAM_SIZE = 0x1000_0000;
- *
- * CFG_GBL_DATA_OFFSET = 0x3000_0000 + 0x1000_0000 - 0x1000 = 0x3FFF_F000
- * CFG_MONITOR_BASE = 0x3FFF_F000 - 0x40000 = 0x3FFB_F000
- * CFG_MALLOC_BASE = 0x3FFB_F000 - 0x40000 = 0x3FF7_F000
- *
- * 0x3000_0000	CFG_SDRAM_BASE
- *					FREE
- * 0x3600_0000	TEXT_BASE
- *		U-BOOT code
- * 0x3602_0000
- *					FREE
- *
- *					STACK
- * 0x3FF7_F000	CFG_MALLOC_BASE
- *					MALLOC_AREA	256kB	Alloc
- * 0x3FFB_F000	CFG_MONITOR_BASE
- *					MONITOR_CODE	256kB	Env
- * 0x3FFF_F000	CFG_GBL_DATA_OFFSET
- *					GLOBAL_DATA	4kB	bd, gd
- * 0x4000_0000	CFG_SDRAM_BASE + CFG_SDRAM_SIZE
- */
-
-/* ddr sdram - main memory */
-#define	CFG_SDRAM_BASE		XILINX_RAM_START
-#define	CFG_SDRAM_SIZE		XILINX_RAM_SIZE
-#define	CFG_MEMTEST_START	CFG_SDRAM_BASE
-#define	CFG_MEMTEST_END		(CFG_SDRAM_BASE + 0x1000)
-
-/* global pointer */
-#define	CFG_GBL_DATA_SIZE	0x1000	/* size of global data */
-#define	CFG_GBL_DATA_OFFSET     (CFG_SDRAM_BASE + CFG_SDRAM_SIZE - CFG_GBL_DATA_SIZE) /* start of global data */
-
-/* monitor code */
-#define	SIZE			0x40000
-#define	CFG_MONITOR_LEN		SIZE
-#define	CFG_MONITOR_BASE	(CFG_GBL_DATA_OFFSET - CFG_MONITOR_LEN)
-#define	CFG_MONITOR_END		(CFG_MONITOR_BASE + CFG_MONITOR_LEN)
-#define	CFG_MALLOC_LEN		SIZE
-#define	CFG_MALLOC_BASE		(CFG_MONITOR_BASE - CFG_MALLOC_LEN)
-
-/* stack */
-#define	CFG_INIT_SP_OFFSET	CFG_MALLOC_BASE
-
-#define	CFG_NO_FLASH		1
-#define	CFG_ENV_IS_NOWHERE	1
-#define	CFG_ENV_SIZE		0x1000
-#define	CFG_ENV_ADDR		(CFG_MONITOR_BASE - CFG_ENV_SIZE)
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#undef CONFIG_CMD_FLASH
-#undef CONFIG_CMD_JFFS2
-#undef CONFIG_CMD_IMLS
-
-#define CONFIG_CMD_ASKENV
-#define CONFIG_CMD_CACHE
-#define CONFIG_CMD_IRQ
-
-#ifndef CFG_ENET
-	#undef CONFIG_CMD_NET
-#else
-	#define CONFIG_CMD_PING
-#endif
-
-#ifdef XILINX_SYSACE_BASEADDR
-#define CONFIG_CMD_EXT2
-#define CONFIG_CMD_FAT
-#endif
-
-/* Miscellaneous configurable options */
-#define	CFG_PROMPT	"U-Boot-mONStR> "
-#define	CFG_CBSIZE	512	/* size of console buffer */
-#define	CFG_PBSIZE	(CFG_CBSIZE + sizeof(CFG_PROMPT) + 16) /* print buffer size */
-#define	CFG_MAXARGS	15	/* max number of command args */
-#define	CFG_LONGHELP
-#define	CFG_LOAD_ADDR	0x12000000 /* default load address */
-
-#define	CONFIG_BOOTDELAY	30
-#define	CONFIG_BOOTARGS		"root=romfs"
-#define	CONFIG_HOSTNAME		"xupv2p"
-#define	CONFIG_BOOTCOMMAND	"base 0;tftp 11000000 image.img;bootm"
-#define	CONFIG_IPADDR		192.168.0.3
-#define	CONFIG_SERVERIP		192.168.0.5
-#define	CONFIG_GATEWAYIP	192.168.0.1
-#define	CONFIG_ETHADDR		00:E0:0C:00:00:FD
-
-/* architecture dependent code */
-#define	CFG_USR_EXCEP	/* user exception */
-#define CFG_HZ	1000
-
-#define CONFIG_PREBOOT	"echo U-BOOT by mONStR;"	\
-	"base 0;" \
-	"echo"
-
-/* system ace */
-#ifdef XILINX_SYSACE_BASEADDR
-#define	CONFIG_SYSTEMACE
-/* #define DEBUG_SYSTEMACE */
-#define	SYSTEMACE_CONFIG_FPGA
-#define	CFG_SYSTEMACE_BASE	XILINX_SYSACE_BASEADDR
-#define	CFG_SYSTEMACE_WIDTH	XILINX_SYSACE_MEM_WIDTH
-#define	CONFIG_DOS_PARTITION
-#endif
-
-#define CONFIG_CMDLINE_EDITING
-#define CONFIG_OF_LIBFDT	1 /* flat device tree */
-
-#endif	/* __CONFIG_H */
diff --git a/include/configs/yosemite.h b/include/configs/yosemite.h
index cb2042ce6..b66ab58d8 100644
--- a/include/configs/yosemite.h
+++ b/include/configs/yosemite.h
@@ -55,36 +55,36 @@
  * Base addresses -- Note these are effective addresses where the
  * actual resources get mapped (not physical addresses)
  *----------------------------------------------------------------------*/
-#define CFG_FLASH_BASE	        0xfc000000	    /* start of FLASH	*/
-#define CFG_PCI_MEMBASE	        0xa0000000	    /* mapped pci memory*/
-#define CFG_PCI_MEMBASE1        CFG_PCI_MEMBASE  + 0x10000000
-#define CFG_PCI_MEMBASE2        CFG_PCI_MEMBASE1 + 0x10000000
-#define CFG_PCI_MEMBASE3        CFG_PCI_MEMBASE2 + 0x10000000
+#define CONFIG_SYS_FLASH_BASE	        0xfc000000	    /* start of FLASH	*/
+#define CONFIG_SYS_PCI_MEMBASE	        0xa0000000	    /* mapped pci memory*/
+#define CONFIG_SYS_PCI_MEMBASE1        CONFIG_SYS_PCI_MEMBASE  + 0x10000000
+#define CONFIG_SYS_PCI_MEMBASE2        CONFIG_SYS_PCI_MEMBASE1 + 0x10000000
+#define CONFIG_SYS_PCI_MEMBASE3        CONFIG_SYS_PCI_MEMBASE2 + 0x10000000
 
 /*Don't change either of these*/
-#define CFG_PERIPHERAL_BASE     0xef600000	    /* internal peripherals*/
-#define CFG_PCI_BASE	        0xe0000000	    /* internal PCI regs*/
+#define CONFIG_SYS_PERIPHERAL_BASE     0xef600000	    /* internal peripherals*/
+#define CONFIG_SYS_PCI_BASE	        0xe0000000	    /* internal PCI regs*/
 /*Don't change either of these*/
 
-#define CFG_USB_DEVICE          0x50000000
-#define CFG_NVRAM_BASE_ADDR     0x80000000
-#define CFG_BCSR_BASE	        (CFG_NVRAM_BASE_ADDR | 0x2000)
-#define CFG_BOOT_BASE_ADDR      0xf0000000
+#define CONFIG_SYS_USB_DEVICE          0x50000000
+#define CONFIG_SYS_NVRAM_BASE_ADDR     0x80000000
+#define CONFIG_SYS_BCSR_BASE	        (CONFIG_SYS_NVRAM_BASE_ADDR | 0x2000)
+#define CONFIG_SYS_BOOT_BASE_ADDR      0xf0000000
 
 /*-----------------------------------------------------------------------
  * Initial RAM & stack pointer (placed in SDRAM)
  *----------------------------------------------------------------------*/
-#define CFG_INIT_RAM_DCACHE	1		/* d-cache as init ram	*/
-#define CFG_INIT_RAM_ADDR	0x70000000		/* DCache       */
-#define CFG_INIT_RAM_END	(4 << 10)
-#define CFG_GBL_DATA_SIZE	256			/* num bytes initial data*/
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_INIT_RAM_DCACHE	1		/* d-cache as init ram	*/
+#define CONFIG_SYS_INIT_RAM_ADDR	0x70000000		/* DCache       */
+#define CONFIG_SYS_INIT_RAM_END	(4 << 10)
+#define CONFIG_SYS_GBL_DATA_SIZE	256			/* num bytes initial data*/
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
 /*-----------------------------------------------------------------------
  * Serial Port
  *----------------------------------------------------------------------*/
-#define CFG_EXT_SERIAL_CLOCK	11059200 /* use external 11.059MHz clk	*/
+#define CONFIG_SYS_EXT_SERIAL_CLOCK	11059200 /* use external 11.059MHz clk	*/
 /*define this if you want console on UART1*/
 #undef CONFIG_UART1_CONSOLE
 
@@ -96,69 +96,68 @@
  * Note: DENX encourages to use redundant environment in FLASH.
  */
 #if 1
-#define CFG_ENV_IS_IN_FLASH     1	/* use FLASH for environment vars	*/
+#define CONFIG_ENV_IS_IN_FLASH     1	/* use FLASH for environment vars	*/
 #else
-#define CFG_ENV_IS_IN_EEPROM	1	/* use EEPROM for environment vars	*/
+#define CONFIG_ENV_IS_IN_EEPROM	1	/* use EEPROM for environment vars	*/
 #endif
 
 /*-----------------------------------------------------------------------
  * FLASH related
  *----------------------------------------------------------------------*/
-#define CFG_FLASH_CFI				/* The flash is CFI compatible	*/
+#define CONFIG_SYS_FLASH_CFI				/* The flash is CFI compatible	*/
 #define CONFIG_FLASH_CFI_DRIVER			/* Use common CFI driver	*/
-#define CFG_FLASH_CFI_AMD_RESET 1		/* AMD RESET for STM 29W320DB!	*/
+#define CONFIG_SYS_FLASH_CFI_AMD_RESET 1		/* AMD RESET for STM 29W320DB!	*/
 
-#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
-#define CFG_MAX_FLASH_SECT	512	/* max number of sectors on one chip	*/
+#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
+#define CONFIG_SYS_MAX_FLASH_SECT	512	/* max number of sectors on one chip	*/
 
-#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
-#define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
+#define CONFIG_SYS_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
+#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
 
-#define CFG_FLASH_USE_BUFFER_WRITE 1	/* use buffered writes (20x faster)	*/
+#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1	/* use buffered writes (20x faster)	*/
 
-#define CFG_FLASH_EMPTY_INFO		/* print 'E' for empty sector on flinfo */
+#define CONFIG_SYS_FLASH_EMPTY_INFO		/* print 'E' for empty sector on flinfo */
 
-#ifdef CFG_ENV_IS_IN_FLASH
-#define CFG_ENV_SECT_SIZE	0x20000	/* size of one complete sector		*/
-#define CFG_ENV_ADDR		(CFG_MONITOR_BASE-CFG_ENV_SECT_SIZE)
-#define	CFG_ENV_SIZE		0x2000	/* Total Size of Environment Sector	*/
+#ifdef CONFIG_ENV_IS_IN_FLASH
+#define CONFIG_ENV_SECT_SIZE	0x20000	/* size of one complete sector		*/
+#define CONFIG_ENV_ADDR		(CONFIG_SYS_MONITOR_BASE-CONFIG_ENV_SECT_SIZE)
+#define	CONFIG_ENV_SIZE		0x2000	/* Total Size of Environment Sector	*/
 
 /* Address and size of Redundant Environment Sector	*/
-#define CFG_ENV_ADDR_REDUND	(CFG_ENV_ADDR-CFG_ENV_SECT_SIZE)
-#define CFG_ENV_SIZE_REDUND	(CFG_ENV_SIZE)
-#endif /* CFG_ENV_IS_IN_FLASH */
+#define CONFIG_ENV_ADDR_REDUND	(CONFIG_ENV_ADDR-CONFIG_ENV_SECT_SIZE)
+#define CONFIG_ENV_SIZE_REDUND	(CONFIG_ENV_SIZE)
+#endif /* CONFIG_ENV_IS_IN_FLASH */
 
 /*-----------------------------------------------------------------------
  * DDR SDRAM
  *----------------------------------------------------------------------*/
 #undef CONFIG_SPD_EEPROM	       /* Don't use SPD EEPROM for setup    */
-#define CFG_KBYTES_SDRAM        (128 * 1024)    /* 128MB		    */
-#define CFG_SDRAM_BANKS	        (2)
+#define CONFIG_SYS_KBYTES_SDRAM        (128 * 1024)    /* 128MB		    */
+#define CONFIG_SYS_SDRAM_BANKS	        (2)
 
 /*-----------------------------------------------------------------------
  * I2C
  *----------------------------------------------------------------------*/
-#define CFG_I2C_SPEED		400000	/* I2C speed and slave address	*/
+#define CONFIG_SYS_I2C_SPEED		400000	/* I2C speed and slave address	*/
 
-#define CFG_I2C_MULTI_EEPROMS
-#define CFG_I2C_EEPROM_ADDR	(0xa8>>1)
-#define CFG_I2C_EEPROM_ADDR_LEN 1
-#define CFG_EEPROM_PAGE_WRITE_ENABLE
-#define CFG_EEPROM_PAGE_WRITE_BITS 3
-#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10
+#define CONFIG_SYS_I2C_MULTI_EEPROMS
+#define CONFIG_SYS_I2C_EEPROM_ADDR	(0xa8>>1)
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10
 
-#ifdef CFG_ENV_IS_IN_EEPROM
-#define CFG_ENV_SIZE		0x200	    /* Size of Environment vars */
-#define CFG_ENV_OFFSET		0x0
-#endif /* CFG_ENV_IS_IN_EEPROM */
+#ifdef CONFIG_ENV_IS_IN_EEPROM
+#define CONFIG_ENV_SIZE		0x200	    /* Size of Environment vars */
+#define CONFIG_ENV_OFFSET		0x0
+#endif /* CONFIG_ENV_IS_IN_EEPROM */
 
 /* I2C SYSMON (LM75, AD7414 is almost compatible)			*/
 #define CONFIG_DTT_LM75		1		/* ON Semi's LM75	*/
 #define CONFIG_DTT_AD7414	1		/* use AD7414		*/
 #define CONFIG_DTT_SENSORS	{0}		/* Sensor addresses	*/
-#define CFG_DTT_MAX_TEMP	70
-#define CFG_DTT_LOW_TEMP	-30
-#define CFG_DTT_HYSTERESIS	3
+#define CONFIG_SYS_DTT_MAX_TEMP	70
+#define CONFIG_SYS_DTT_LOW_TEMP	-30
+#define CONFIG_SYS_DTT_HYSTERESIS	3
 
 /*
  * Default environment variables
@@ -186,13 +185,13 @@
 /* USB */
 #define CONFIG_USB_OHCI_NEW
 #define CONFIG_USB_STORAGE
-#define CFG_OHCI_BE_CONTROLLER
+#define CONFIG_SYS_OHCI_BE_CONTROLLER
 
-#undef CFG_USB_OHCI_BOARD_INIT
-#define CFG_USB_OHCI_CPU_INIT	1
-#define CFG_USB_OHCI_REGS_BASE	(CFG_PERIPHERAL_BASE | 0x1000)
-#define CFG_USB_OHCI_SLOT_NAME	"ppc440"
-#define CFG_USB_OHCI_MAX_ROOT_PORTS	15
+#undef CONFIG_SYS_USB_OHCI_BOARD_INIT
+#define CONFIG_SYS_USB_OHCI_CPU_INIT	1
+#define CONFIG_SYS_USB_OHCI_REGS_BASE	(CONFIG_SYS_PERIPHERAL_BASE | 0x1000)
+#define CONFIG_SYS_USB_OHCI_SLOT_NAME	"ppc440"
+#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS	15
 
 /* Comment this out to enable USB 1.1 device */
 #define USB_2_0_DEVICE
@@ -226,29 +225,29 @@
 #define CONFIG_PCI			/* include pci support	        */
 #undef  CONFIG_PCI_PNP			/* do (not) pci plug-and-play   */
 #define CONFIG_PCI_SCAN_SHOW            /* show pci devices on startup  */
-#define CFG_PCI_TARGBASE        0x80000000 /* PCIaddr mapped to CFG_PCI_MEMBASE*/
+#define CONFIG_SYS_PCI_TARGBASE        0x80000000 /* PCIaddr mapped to CONFIG_SYS_PCI_MEMBASE*/
 
 /* Board-specific PCI */
-#define CFG_PCI_TARGET_INIT
-#define CFG_PCI_MASTER_INIT
+#define CONFIG_SYS_PCI_TARGET_INIT
+#define CONFIG_SYS_PCI_MASTER_INIT
 
-#define CFG_PCI_SUBSYS_VENDORID 0x10e8	/* AMCC */
-#define CFG_PCI_SUBSYS_ID       0xcafe	/* Whatever */
+#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x10e8	/* AMCC */
+#define CONFIG_SYS_PCI_SUBSYS_ID       0xcafe	/* Whatever */
 
 /*-----------------------------------------------------------------------
  * External Bus Controller (EBC) Setup
  *----------------------------------------------------------------------*/
-#define CFG_FLASH		CFG_FLASH_BASE
-#define CFG_CPLD		0x80000000
+#define CONFIG_SYS_FLASH		CONFIG_SYS_FLASH_BASE
+#define CONFIG_SYS_CPLD		0x80000000
 
 /* Memory Bank 0 (NOR-FLASH) initialization					*/
-#define CFG_EBC_PB0AP		0x03017300
-#define CFG_EBC_PB0CR		(CFG_FLASH | 0xda000)
+#define CONFIG_SYS_EBC_PB0AP		0x03017300
+#define CONFIG_SYS_EBC_PB0CR		(CONFIG_SYS_FLASH | 0xda000)
 
 /* Memory Bank 2 (CPLD) initialization						*/
-#define CFG_EBC_PB2AP		0x04814500
-#define CFG_EBC_PB2CR		(CFG_CPLD | 0x18000)
+#define CONFIG_SYS_EBC_PB2AP		0x04814500
+#define CONFIG_SYS_EBC_PB2CR		(CONFIG_SYS_CPLD | 0x18000)
 
-#define CFG_BCSR5_PCI66EN	0x80
+#define CONFIG_SYS_BCSR5_PCI66EN	0x80
 
 #endif	/* __CONFIG_H */
diff --git a/include/configs/yucca.h b/include/configs/yucca.h
index 026fef67c..b165bd7a1 100644
--- a/include/configs/yucca.h
+++ b/include/configs/yucca.h
@@ -58,49 +58,49 @@
  * Base addresses -- Note these are effective addresses where the
  * actual resources get mapped (not physical addresses)
  *----------------------------------------------------------------------*/
-#define CFG_FLASH_BASE		0xfff00000	/* start of FLASH	*/
-#define CFG_PERIPHERAL_BASE	0xa0000000	/* internal peripherals	*/
-#define CFG_ISRAM_BASE		0x90000000	/* internal SRAM	*/
+#define CONFIG_SYS_FLASH_BASE		0xfff00000	/* start of FLASH	*/
+#define CONFIG_SYS_PERIPHERAL_BASE	0xa0000000	/* internal peripherals	*/
+#define CONFIG_SYS_ISRAM_BASE		0x90000000	/* internal SRAM	*/
 
-#define CFG_PCI_MEMBASE		0x80000000	/* mapped PCI memory	*/
-#define CFG_PCI_BASE		0xd0000000	/* internal PCI regs	*/
-#define CFG_PCI_TARGBASE	CFG_PCI_MEMBASE
+#define CONFIG_SYS_PCI_MEMBASE		0x80000000	/* mapped PCI memory	*/
+#define CONFIG_SYS_PCI_BASE		0xd0000000	/* internal PCI regs	*/
+#define CONFIG_SYS_PCI_TARGBASE	CONFIG_SYS_PCI_MEMBASE
 
-#define CFG_PCIE_MEMBASE	0xb0000000	/* mapped PCIe memory	*/
-#define CFG_PCIE_MEMSIZE	0x08000000	/* smallest incr for PCIe port */
-#define CFG_PCIE_BASE		0xe0000000	/* PCIe UTL regs */
+#define CONFIG_SYS_PCIE_MEMBASE	0xb0000000	/* mapped PCIe memory	*/
+#define CONFIG_SYS_PCIE_MEMSIZE	0x08000000	/* smallest incr for PCIe port */
+#define CONFIG_SYS_PCIE_BASE		0xe0000000	/* PCIe UTL regs */
 
-#define CFG_PCIE0_CFGBASE	0xc0000000
-#define CFG_PCIE1_CFGBASE	0xc1000000
-#define CFG_PCIE2_CFGBASE	0xc2000000
-#define CFG_PCIE0_XCFGBASE	0xc3000000
-#define CFG_PCIE1_XCFGBASE	0xc3001000
-#define CFG_PCIE2_XCFGBASE	0xc3002000
+#define CONFIG_SYS_PCIE0_CFGBASE	0xc0000000
+#define CONFIG_SYS_PCIE1_CFGBASE	0xc1000000
+#define CONFIG_SYS_PCIE2_CFGBASE	0xc2000000
+#define CONFIG_SYS_PCIE0_XCFGBASE	0xc3000000
+#define CONFIG_SYS_PCIE1_XCFGBASE	0xc3001000
+#define CONFIG_SYS_PCIE2_XCFGBASE	0xc3002000
 
 /* base address of inbound PCIe window */
-#define CFG_PCIE_INBOUND_BASE	0x0000000400000000ULL
+#define CONFIG_SYS_PCIE_INBOUND_BASE	0x0000000400000000ULL
 
 /* System RAM mapped to PCI space */
-#define CONFIG_PCI_SYS_MEM_BUS	CFG_SDRAM_BASE
-#define CONFIG_PCI_SYS_MEM_PHYS	CFG_SDRAM_BASE
+#define CONFIG_PCI_SYS_MEM_BUS	CONFIG_SYS_SDRAM_BASE
+#define CONFIG_PCI_SYS_MEM_PHYS	CONFIG_SYS_SDRAM_BASE
 #define CONFIG_PCI_SYS_MEM_SIZE	(1024 * 1024 * 1024)
 
-#define CFG_FPGA_BASE		0xe2000000	/* epld			*/
-#define CFG_OPER_FLASH		0xe7000000	/* SRAM - OPER Flash	*/
+#define CONFIG_SYS_FPGA_BASE		0xe2000000	/* epld			*/
+#define CONFIG_SYS_OPER_FLASH		0xe7000000	/* SRAM - OPER Flash	*/
 
-/* #define CFG_NVRAM_BASE_ADDR 0x08000000 */
+/* #define CONFIG_SYS_NVRAM_BASE_ADDR 0x08000000 */
 /*-----------------------------------------------------------------------
  * Initial RAM & stack pointer (placed in internal SRAM)
  *----------------------------------------------------------------------*/
-#define CFG_TEMP_STACK_OCM	1
-#define CFG_OCM_DATA_ADDR	CFG_ISRAM_BASE
-#define CFG_INIT_RAM_ADDR	CFG_ISRAM_BASE	/* Initial RAM address	*/
-#define CFG_INIT_RAM_END	0x2000		/* End of used area in RAM */
-#define CFG_GBL_DATA_SIZE	128		/* num bytes initial data */
+#define CONFIG_SYS_TEMP_STACK_OCM	1
+#define CONFIG_SYS_OCM_DATA_ADDR	CONFIG_SYS_ISRAM_BASE
+#define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_ISRAM_BASE	/* Initial RAM address	*/
+#define CONFIG_SYS_INIT_RAM_END	0x2000		/* End of used area in RAM */
+#define CONFIG_SYS_GBL_DATA_SIZE	128		/* num bytes initial data */
 
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_POST_WORD_ADDR	(CFG_GBL_DATA_OFFSET - 0x4)
-#define CFG_INIT_SP_OFFSET	CFG_POST_WORD_ADDR
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_POST_WORD_ADDR	(CONFIG_SYS_GBL_DATA_OFFSET - 0x4)
+#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_POST_WORD_ADDR
 
 /*-----------------------------------------------------------------------
  * Serial Port
@@ -108,8 +108,8 @@
 #undef CONFIG_UART1_CONSOLE
 
 #undef	CONFIG_SERIAL_SOFTWARE_FIFO
-#undef CFG_EXT_SERIAL_CLOCK
-/* #define CFG_EXT_SERIAL_CLOCK	(1843200 * 6) */ /* Ext clk @ 11.059 MHz */
+#undef CONFIG_SYS_EXT_SERIAL_CLOCK
+/* #define CONFIG_SYS_EXT_SERIAL_CLOCK	(1843200 * 6) */ /* Ext clk @ 11.059 MHz */
 
 /*-----------------------------------------------------------------------
  * DDR SDRAM
@@ -121,27 +121,27 @@
 /*-----------------------------------------------------------------------
  * I2C
  *----------------------------------------------------------------------*/
-#define CFG_I2C_SPEED		400000	/* I2C speed and slave address	*/
+#define CONFIG_SYS_I2C_SPEED		400000	/* I2C speed and slave address	*/
 
 #define IIC0_BOOTPROM_ADDR	0x50
 #define IIC0_ALT_BOOTPROM_ADDR	0x54
 
 /* Don't probe these addrs */
-#define CFG_I2C_NOPROBES	{0x50, 0x52, 0x53, 0x54}
+#define CONFIG_SYS_I2C_NOPROBES	{0x50, 0x52, 0x53, 0x54}
 
 /* #if defined(CONFIG_CMD_EEPROM) */
-/* #define CFG_I2C_EEPROM_ADDR	0x50 */	/* I2C boot EEPROM		*/
-#define CFG_I2C_EEPROM_ADDR_LEN	2	/* Bytes of address		*/
+/* #define CONFIG_SYS_I2C_EEPROM_ADDR	0x50 */	/* I2C boot EEPROM		*/
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN	2	/* Bytes of address		*/
 /* #endif */
 
 /*-----------------------------------------------------------------------
  * Environment
  *----------------------------------------------------------------------*/
-/* #define CFG_NVRAM_SIZE	(0x2000 - 8) */	/* NVRAM size(8k)- RTC regs */
+/* #define CONFIG_SYS_NVRAM_SIZE	(0x2000 - 8) */	/* NVRAM size(8k)- RTC regs */
 
-#undef  CFG_ENV_IS_IN_NVRAM		/* ... not in NVRAM		*/
-#define	CFG_ENV_IS_IN_FLASH	1	/* Environment uses flash	*/
-#undef	CFG_ENV_IS_IN_EEPROM		/* ... not in EEPROM		*/
+#undef  CONFIG_ENV_IS_IN_NVRAM		/* ... not in NVRAM		*/
+#define	CONFIG_ENV_IS_IN_FLASH	1	/* Environment uses flash	*/
+#undef	CONFIG_ENV_IS_IN_EEPROM		/* ... not in EEPROM		*/
 #define CONFIG_ENV_OVERWRITE	1
 
 /*
@@ -174,26 +174,26 @@
 /*-----------------------------------------------------------------------
  * FLASH related
  *----------------------------------------------------------------------*/
-#define CFG_MAX_FLASH_BANKS	3	/* number of banks		*/
-#define CFG_MAX_FLASH_SECT	256	/* sectors per device		*/
-
-#undef	CFG_FLASH_CHECKSUM
-#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms) */
-#define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms) */
-
-#define CFG_FLASH_ADDR0		0x5555
-#define CFG_FLASH_ADDR1		0x2aaa
-#define CFG_FLASH_WORD_SIZE	unsigned char
-
-#define CFG_FLASH_2ND_16BIT_DEV	1	/* evb440SPe has 8 and 16bit device */
-#define CFG_FLASH_2ND_ADDR	0xe7c00000 /* evb440SPe has 8 and 16bit device*/
-
-#ifdef CFG_ENV_IS_IN_FLASH
-#define CFG_ENV_SECT_SIZE	0x10000	/* size of one complete sector	*/
-#define CFG_ENV_ADDR		0xfffa0000
-/* #define CFG_ENV_ADDR		(CFG_MONITOR_BASE-CFG_ENV_SECT_SIZE) */
-#define CFG_ENV_SIZE		0x10000	/* Size of Environment vars	*/
-#endif /* CFG_ENV_IS_IN_FLASH */
+#define CONFIG_SYS_MAX_FLASH_BANKS	3	/* number of banks		*/
+#define CONFIG_SYS_MAX_FLASH_SECT	256	/* sectors per device		*/
+
+#undef	CONFIG_SYS_FLASH_CHECKSUM
+#define CONFIG_SYS_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms) */
+#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms) */
+
+#define CONFIG_SYS_FLASH_ADDR0		0x5555
+#define CONFIG_SYS_FLASH_ADDR1		0x2aaa
+#define CONFIG_SYS_FLASH_WORD_SIZE	unsigned char
+
+#define CONFIG_SYS_FLASH_2ND_16BIT_DEV	1	/* evb440SPe has 8 and 16bit device */
+#define CONFIG_SYS_FLASH_2ND_ADDR	0xe7c00000 /* evb440SPe has 8 and 16bit device*/
+
+#ifdef CONFIG_ENV_IS_IN_FLASH
+#define CONFIG_ENV_SECT_SIZE	0x10000	/* size of one complete sector	*/
+#define CONFIG_ENV_ADDR		0xfffa0000
+/* #define CONFIG_ENV_ADDR		(CONFIG_SYS_MONITOR_BASE-CONFIG_ENV_SECT_SIZE) */
+#define CONFIG_ENV_SIZE		0x10000	/* Size of Environment vars	*/
+#endif /* CONFIG_ENV_IS_IN_FLASH */
 /*-----------------------------------------------------------------------
  * PCI stuff
  *-----------------------------------------------------------------------
@@ -205,12 +205,12 @@
 #define CONFIG_PCI_CONFIG_HOST_BRIDGE
 
 /* Board-specific PCI */
-#define CFG_PCI_TARGET_INIT		/* let board init pci target    */
-#undef	CFG_PCI_MASTER_INIT
+#define CONFIG_SYS_PCI_TARGET_INIT		/* let board init pci target    */
+#undef	CONFIG_SYS_PCI_MASTER_INIT
 
-#define CFG_PCI_SUBSYS_VENDORID 0x1014	/* IBM				*/
-#define CFG_PCI_SUBSYS_DEVICEID 0xcafe	/* Whatever			*/
-/* #define CFG_PCI_SUBSYS_ID	CFG_PCI_SUBSYS_DEVICEID */
+#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x1014	/* IBM				*/
+#define CONFIG_SYS_PCI_SUBSYS_DEVICEID 0xcafe	/* Whatever			*/
+/* #define CONFIG_SYS_PCI_SUBSYS_ID	CONFIG_SYS_PCI_SUBSYS_DEVICEID */
 
 /*
  *  NETWORK Support (PCI):
diff --git a/include/configs/zeus.h b/include/configs/zeus.h
index b50cba556..1a77c7196 100644
--- a/include/configs/zeus.h
+++ b/include/configs/zeus.h
@@ -42,16 +42,17 @@
 #define PLLMR0_DEFAULT		PLLMR0_333_111_55_111
 #define PLLMR1_DEFAULT		PLLMR1_333_111_55_111
 
-#define CFG_ENV_IS_IN_FLASH     1	/* use FLASH for environment vars	*/
+#define CONFIG_ENV_IS_IN_FLASH     1	/* use FLASH for environment vars	*/
 
 #define CONFIG_OVERWRITE_ETHADDR_ONCE	1
 
+#define CONFIG_PPC4xx_EMAC
 #define CONFIG_MII		1	/* MII PHY management		*/
 #define CONFIG_PHY_ADDR		0x01	/* PHY address			*/
 #define CONFIG_HAS_ETH1		1
 #define CONFIG_PHY1_ADDR	0x11	/* EMAC1 PHY address		*/
 #define CONFIG_NET_MULTI	1
-#define CFG_RX_ETH_BUFFER	16	/* Number of ethernet rx buffers & descriptors */
+#define CONFIG_SYS_RX_ETH_BUFFER	16	/* Number of ethernet rx buffers & descriptors */
 #define CONFIG_PHY_RESET	1
 #define CONFIG_PHY_RESET_DELAY	300	/* PHY RESET recovery delay	*/
 
@@ -84,21 +85,21 @@
 #define CONFIG_CMD_REGINFO
 
 /* POST support */
-#define CONFIG_POST		(CFG_POST_MEMORY   | \
-				 CFG_POST_CPU	   | \
-				 CFG_POST_CACHE	   | \
-				 CFG_POST_UART	   | \
-				 CFG_POST_ETHER)
+#define CONFIG_POST		(CONFIG_SYS_POST_MEMORY   | \
+				 CONFIG_SYS_POST_CPU	   | \
+				 CONFIG_SYS_POST_CACHE	   | \
+				 CONFIG_SYS_POST_UART	   | \
+				 CONFIG_SYS_POST_ETHER)
 
-#define CFG_POST_ETHER_EXT_LOOPBACK	/* eth POST using ext loopack connector	*/
+#define CONFIG_SYS_POST_ETHER_EXT_LOOPBACK	/* eth POST using ext loopack connector	*/
 
 /* Define here the base-addresses of the UARTs to test in POST */
-#define CFG_POST_UART_TABLE	{UART0_BASE}
+#define CONFIG_SYS_POST_UART_TABLE	{UART0_BASE}
 
 #define CONFIG_LOGBUFFER
-#define CFG_POST_CACHE_ADDR	0x00800000 /* free virtual address	*/
+#define CONFIG_SYS_POST_CACHE_ADDR	0x00800000 /* free virtual address	*/
 
-#define CFG_CONSOLE_IS_IN_ENV /* Otherwise it catches logbuffer as output */
+#define CONFIG_SYS_CONSOLE_IS_IN_ENV /* Otherwise it catches logbuffer as output */
 
 #undef CONFIG_WATCHDOG			/* watchdog disabled		*/
 
@@ -112,48 +113,48 @@
 #define CONFIG_SDRAM_BANK1	1	/* init onboard SDRAM bank 1 */
 
 /* SDRAM timings used in datasheet */
-#define CFG_SDRAM_CL            3	/* CAS latency */
-#define CFG_SDRAM_tRP           20	/* PRECHARGE command period */
-#define CFG_SDRAM_tRC           66	/* ACTIVE-to-ACTIVE command period */
-#define CFG_SDRAM_tRCD          20	/* ACTIVE-to-READ delay */
-#define CFG_SDRAM_tRFC		66	/* Auto refresh period */
+#define CONFIG_SYS_SDRAM_CL            3	/* CAS latency */
+#define CONFIG_SYS_SDRAM_tRP           20	/* PRECHARGE command period */
+#define CONFIG_SYS_SDRAM_tRC           66	/* ACTIVE-to-ACTIVE command period */
+#define CONFIG_SYS_SDRAM_tRCD          20	/* ACTIVE-to-READ delay */
+#define CONFIG_SYS_SDRAM_tRFC		66	/* Auto refresh period */
 
 /*-----------------------------------------------------------------------
  * Serial Port
  *----------------------------------------------------------------------*/
-#undef	CFG_EXT_SERIAL_CLOCK			/* external serial clock */
-#define CFG_BASE_BAUD		691200
+#undef	CONFIG_SYS_EXT_SERIAL_CLOCK			/* external serial clock */
+#define CONFIG_SYS_BASE_BAUD		691200
 #define CONFIG_BAUDRATE		115200
 #define CONFIG_SERIAL_MULTI
 
 /* The following table includes the supported baudrates */
-#define CFG_BAUDRATE_TABLE	\
+#define CONFIG_SYS_BAUDRATE_TABLE	\
 	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400}
 
 /*-----------------------------------------------------------------------
  * Miscellaneous configurable options
  *----------------------------------------------------------------------*/
-#define CFG_LONGHELP			/* undef to save memory		*/
-#define CFG_PROMPT	        "=> "	/* Monitor Command Prompt	*/
+#define CONFIG_SYS_LONGHELP			/* undef to save memory		*/
+#define CONFIG_SYS_PROMPT	        "=> "	/* Monitor Command Prompt	*/
 #if defined(CONFIG_CMD_KGDB)
-#define CFG_CBSIZE	        1024	/* Console I/O Buffer Size	*/
+#define CONFIG_SYS_CBSIZE	        1024	/* Console I/O Buffer Size	*/
 #else
-#define CFG_CBSIZE	        256	/* Console I/O Buffer Size	*/
+#define CONFIG_SYS_CBSIZE	        256	/* Console I/O Buffer Size	*/
 #endif
-#define CFG_PBSIZE              (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define CFG_MAXARGS	        16	/* max number of command args	*/
-#define CFG_BARGSIZE	        CFG_CBSIZE /* Boot Argument Buffer Size	*/
+#define CONFIG_SYS_PBSIZE              (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS	        16	/* max number of command args	*/
+#define CONFIG_SYS_BARGSIZE	        CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size	*/
 
-#define CFG_MEMTEST_START	0x0400000 /* memtest works on		*/
-#define CFG_MEMTEST_END		0x0C00000 /* 4 ... 12 MB in DRAM	*/
+#define CONFIG_SYS_MEMTEST_START	0x0400000 /* memtest works on		*/
+#define CONFIG_SYS_MEMTEST_END		0x0C00000 /* 4 ... 12 MB in DRAM	*/
 
-#define CFG_LOAD_ADDR		0x100000  /* default load address	*/
-#define CFG_EXTBDINFO		1	/* To use extended board_into (bd_t) */
+#define CONFIG_SYS_LOAD_ADDR		0x100000  /* default load address	*/
+#define CONFIG_SYS_EXTBDINFO		1	/* To use extended board_into (bd_t) */
 
-#define CFG_HZ		        1000	/* decrementer freq: 1 ms ticks	*/
+#define CONFIG_SYS_HZ		        1000	/* decrementer freq: 1 ms ticks	*/
 
 #define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
-#define CFG_LOADS_BAUD_CHANGE	1	/* allow baudrate change	*/
+#define CONFIG_SYS_LOADS_BAUD_CHANGE	1	/* allow baudrate change	*/
 
 #define CONFIG_CMDLINE_EDITING	1	/* add command line history	*/
 #define CONFIG_LOOPW            1       /* enable loopw command         */
@@ -166,18 +167,17 @@
  *----------------------------------------------------------------------*/
 #define CONFIG_HARD_I2C		1		/* I2C with hardware support	*/
 #undef	CONFIG_SOFT_I2C				/* I2C bit-banged		*/
-#define CFG_I2C_SPEED		400000		/* I2C speed and slave address	*/
-#define CFG_I2C_SLAVE		0x7F
+#define CONFIG_SYS_I2C_SPEED		400000		/* I2C speed and slave address	*/
+#define CONFIG_SYS_I2C_SLAVE		0x7F
 
 /* these are for the ST M24C02 2kbit serial i2c eeprom */
-#define CFG_I2C_EEPROM_ADDR	0x50		/* base address */
-#define CFG_I2C_EEPROM_ADDR_LEN	1		/* bytes of address */
+#define CONFIG_SYS_I2C_EEPROM_ADDR	0x50		/* base address */
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN	1		/* bytes of address */
 /* mask of address bits that overflow into the "EEPROM chip address"    */
-#define CFG_I2C_EEPROM_ADDR_OVERFLOW	0x07
+#define CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW	0x07
 
-#define CFG_EEPROM_PAGE_WRITE_ENABLE	1	/* write eeprom in pages */
-#define CFG_EEPROM_PAGE_WRITE_BITS	3	/* 8 byte write page size */
-#define CFG_EEPROM_PAGE_WRITE_DELAY_MS	10	/* and takes up to 10 msec */
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS	3	/* 8 byte write page size */
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	10	/* and takes up to 10 msec */
 
 /*
  * The layout of the I2C EEPROM, used for bootstrap setup and for board-
@@ -191,80 +191,80 @@
 /*-----------------------------------------------------------------------
  * Start addresses for the final memory configuration
  * (Set up by the startup code)
- * Please note that CFG_SDRAM_BASE _must_ start at 0
+ * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
  */
-#define CFG_SDRAM_BASE		0x00000000
-#define CFG_FLASH_BASE		0xFF000000
-#define CFG_MONITOR_LEN		(256 * 1024)	/* Reserve 256 kB for Monitor	*/
-#define CFG_MALLOC_LEN		(128 * 1024)	/* Reserve 128 kB for malloc()	*/
-#define CFG_MONITOR_BASE	(-CFG_MONITOR_LEN)
+#define CONFIG_SYS_SDRAM_BASE		0x00000000
+#define CONFIG_SYS_FLASH_BASE		0xFF000000
+#define CONFIG_SYS_MONITOR_LEN		(256 * 1024)	/* Reserve 256 kB for Monitor	*/
+#define CONFIG_SYS_MALLOC_LEN		(128 * 1024)	/* Reserve 128 kB for malloc()	*/
+#define CONFIG_SYS_MONITOR_BASE	(-CONFIG_SYS_MONITOR_LEN)
 
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
+#define CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
 
 /*-----------------------------------------------------------------------
  * FLASH organization
  */
-#define CFG_FLASH_CFI				/* The flash is CFI compatible	*/
+#define CONFIG_SYS_FLASH_CFI				/* The flash is CFI compatible	*/
 #define CONFIG_FLASH_CFI_DRIVER			/* Use common CFI driver	*/
 
-#define CFG_FLASH_BANKS_LIST	{ CFG_FLASH_BASE }
+#define CONFIG_SYS_FLASH_BANKS_LIST	{ CONFIG_SYS_FLASH_BASE }
 
-#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
-#define CFG_MAX_FLASH_SECT	512	/* max number of sectors on one chip	*/
+#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
+#define CONFIG_SYS_MAX_FLASH_SECT	512	/* max number of sectors on one chip	*/
 
-#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
-#define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
+#define CONFIG_SYS_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
+#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
 
-#define CFG_FLASH_USE_BUFFER_WRITE 1	/* use buffered writes (20x faster)	*/
-#define CFG_FLASH_PROTECTION	1	/* use hardware flash protection	*/
+#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1	/* use buffered writes (20x faster)	*/
+#define CONFIG_SYS_FLASH_PROTECTION	1	/* use hardware flash protection	*/
 
-#define CFG_FLASH_EMPTY_INFO		/* print 'E' for empty sector on flinfo */
-#define CFG_FLASH_QUIET_TEST	1	/* don't warn upon unknown flash	*/
+#define CONFIG_SYS_FLASH_EMPTY_INFO		/* print 'E' for empty sector on flinfo */
+#define CONFIG_SYS_FLASH_QUIET_TEST	1	/* don't warn upon unknown flash	*/
 
-#ifdef CFG_ENV_IS_IN_FLASH
-#define CFG_ENV_SECT_SIZE	0x20000	/* size of one complete sector		*/
-#define CFG_ENV_ADDR		((-CFG_MONITOR_LEN)-CFG_ENV_SECT_SIZE)
-#define	CFG_ENV_SIZE		0x2000	/* Total Size of Environment Sector	*/
+#ifdef CONFIG_ENV_IS_IN_FLASH
+#define CONFIG_ENV_SECT_SIZE	0x20000	/* size of one complete sector		*/
+#define CONFIG_ENV_ADDR		((-CONFIG_SYS_MONITOR_LEN)-CONFIG_ENV_SECT_SIZE)
+#define	CONFIG_ENV_SIZE		0x2000	/* Total Size of Environment Sector	*/
 
 /* Address and size of Redundant Environment Sector	*/
-#define CFG_ENV_ADDR_REDUND	(CFG_ENV_ADDR-CFG_ENV_SECT_SIZE)
-#define CFG_ENV_SIZE_REDUND	(CFG_ENV_SIZE)
+#define CONFIG_ENV_ADDR_REDUND	(CONFIG_ENV_ADDR-CONFIG_ENV_SECT_SIZE)
+#define CONFIG_ENV_SIZE_REDUND	(CONFIG_ENV_SIZE)
 #endif
 
 /*-----------------------------------------------------------------------
  * Definitions for initial stack pointer and data area (in data cache)
  */
 /* use on chip memory (OCM) for temperary stack until sdram is tested */
-#define CFG_TEMP_STACK_OCM	1
+#define CONFIG_SYS_TEMP_STACK_OCM	1
 
 /* On Chip Memory location */
-#define CFG_OCM_DATA_ADDR	0xF8000000
-#define CFG_OCM_DATA_SIZE	0x1000
-#define CFG_INIT_RAM_ADDR	CFG_OCM_DATA_ADDR /* inside of OCM		*/
-#define CFG_INIT_RAM_END	CFG_OCM_DATA_SIZE /* End of used area in RAM	*/
+#define CONFIG_SYS_OCM_DATA_ADDR	0xF8000000
+#define CONFIG_SYS_OCM_DATA_SIZE	0x1000
+#define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_OCM_DATA_ADDR /* inside of OCM		*/
+#define CONFIG_SYS_INIT_RAM_END	CONFIG_SYS_OCM_DATA_SIZE /* End of used area in RAM	*/
 
-#define CFG_GBL_DATA_SIZE	128  /* size in bytes reserved for initial data */
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define CONFIG_SYS_GBL_DATA_SIZE	128  /* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
 /* reserve some memory for POST and BOOT limit info */
-#define CFG_INIT_SP_OFFSET	(CFG_GBL_DATA_OFFSET - 16)
+#define CONFIG_SYS_INIT_SP_OFFSET	(CONFIG_SYS_GBL_DATA_OFFSET - 16)
 
 /* extra data in OCM */
-#define CFG_POST_WORD_ADDR	(CFG_GBL_DATA_OFFSET - 4)
-#define CFG_POST_MAGIC		(CFG_OCM_DATA_ADDR + CFG_GBL_DATA_OFFSET - 8)
-#define CFG_POST_VAL		(CFG_OCM_DATA_ADDR + CFG_GBL_DATA_OFFSET - 12)
+#define CONFIG_SYS_POST_WORD_ADDR	(CONFIG_SYS_GBL_DATA_OFFSET - 4)
+#define CONFIG_SYS_POST_MAGIC		(CONFIG_SYS_OCM_DATA_ADDR + CONFIG_SYS_GBL_DATA_OFFSET - 8)
+#define CONFIG_SYS_POST_VAL		(CONFIG_SYS_OCM_DATA_ADDR + CONFIG_SYS_GBL_DATA_OFFSET - 12)
 
 /*-----------------------------------------------------------------------
  * External Bus Controller (EBC) Setup
  */
 
 /* Memory Bank 0 (Flash 16M) initialization					*/
-#define CFG_EBC_PB0AP		0x05815600
-#define CFG_EBC_PB0CR		0xFF09A000  /* BAS=0xFF0,BS=16MB,BU=R/W,BW=16bit  */
+#define CONFIG_SYS_EBC_PB0AP		0x05815600
+#define CONFIG_SYS_EBC_PB0CR		0xFF09A000  /* BAS=0xFF0,BS=16MB,BU=R/W,BW=16bit  */
 
 /*-----------------------------------------------------------------------
  * Definitions for GPIO setup (PPC405EP specific)
@@ -278,23 +278,23 @@
  * GPIO0[28-29] - UART1 data signal input/output
  * GPIO0[30-31] - EMAC0 and EMAC1 reject packet inputs
  */
-#define CFG_GPIO0_OSRH		0x15555550	/* Chip selects */
-#define CFG_GPIO0_OSRL		0x00000110	/* UART_DTR-pin 27 alt out */
-#define CFG_GPIO0_ISR1H		0x10000041	/* Pin 2, 12 is input */
-#define CFG_GPIO0_ISR1L		0x15505440	/* OUT: LEDs 22/23; IN: pin12,2, NVALID# */
-#define CFG_GPIO0_TSRH		0x00000000
-#define CFG_GPIO0_TSRL		0x00000000
-#define CFG_GPIO0_TCR		0xBFF68317	/* 3-state OUT: 22/23/29; 12,2 is not 3-state */
-#define CFG_GPIO0_ODR		0x00000000
-
-#define CFG_GPIO_SW_RESET	1
-#define CFG_GPIO_ZEUS_PE	12
-#define CFG_GPIO_LED_RED	22
-#define CFG_GPIO_LED_GREEN	23
+#define CONFIG_SYS_GPIO0_OSRH		0x15555550	/* Chip selects */
+#define CONFIG_SYS_GPIO0_OSRL		0x00000110	/* UART_DTR-pin 27 alt out */
+#define CONFIG_SYS_GPIO0_ISR1H		0x10000041	/* Pin 2, 12 is input */
+#define CONFIG_SYS_GPIO0_ISR1L		0x15505440	/* OUT: LEDs 22/23; IN: pin12,2, NVALID# */
+#define CONFIG_SYS_GPIO0_TSRH		0x00000000
+#define CONFIG_SYS_GPIO0_TSRL		0x00000000
+#define CONFIG_SYS_GPIO0_TCR		0xBFF68317	/* 3-state OUT: 22/23/29; 12,2 is not 3-state */
+#define CONFIG_SYS_GPIO0_ODR		0x00000000
+
+#define CONFIG_SYS_GPIO_SW_RESET	1
+#define CONFIG_SYS_GPIO_ZEUS_PE	12
+#define CONFIG_SYS_GPIO_LED_RED	22
+#define CONFIG_SYS_GPIO_LED_GREEN	23
 
 /* Time in milli-seconds */
-#define CFG_TIME_POST		5000
-#define CFG_TIME_FACTORY_RESET	10000
+#define CONFIG_SYS_TIME_POST		5000
+#define CONFIG_SYS_TIME_FACTORY_RESET	10000
 
 /*
  * Internal Definitions
@@ -309,6 +309,12 @@
 #define CONFIG_KGDB_SER_INDEX	2		/* which serial port to use */
 #endif
 
+/*
+ * Pass open firmware flat tree
+ */
+#define CONFIG_OF_LIBFDT
+#define CONFIG_OF_BOARD_SETUP
+
 /* ENVIRONMENT VARS */
 
 #define CONFIG_PREBOOT		"echo;echo Welcome to Bulletendpoints board v1.1;echo"
diff --git a/include/configs/zylonite.h b/include/configs/zylonite.h
index 517ecb13b..53397d807 100644
--- a/include/configs/zylonite.h
+++ b/include/configs/zylonite.h
@@ -50,8 +50,8 @@
 /*
  * Size of malloc() pool
  */
-#define CFG_MALLOC_LEN	    (CFG_ENV_SIZE + 128*1024)
-#define CFG_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
+#define CONFIG_SYS_MALLOC_LEN	    (CONFIG_ENV_SIZE + 128*1024)
+#define CONFIG_SYS_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
 
 /*
  * Hardware drivers
@@ -121,38 +121,38 @@
 /*
  * Miscellaneous configurable options
  */
-#define CFG_HUSH_PARSER		1
-#define CFG_PROMPT_HUSH_PS2	"> "
+#define CONFIG_SYS_HUSH_PARSER		1
+#define CONFIG_SYS_PROMPT_HUSH_PS2	"> "
 
-#define CFG_LONGHELP				/* undef to save memory		*/
-#ifdef CFG_HUSH_PARSER
-#define CFG_PROMPT		"$ "		/* Monitor Command Prompt */
+#define CONFIG_SYS_LONGHELP				/* undef to save memory		*/
+#ifdef CONFIG_SYS_HUSH_PARSER
+#define CONFIG_SYS_PROMPT		"$ "		/* Monitor Command Prompt */
 #else
-#define CFG_PROMPT		"=> "		/* Monitor Command Prompt */
+#define CONFIG_SYS_PROMPT		"=> "		/* Monitor Command Prompt */
 #endif
-#define CFG_CBSIZE		256		/* Console I/O Buffer Size	*/
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define CFG_MAXARGS		16		/* max number of command args	*/
-#define CFG_BARGSIZE		CFG_CBSIZE	/* Boot Argument Buffer Size	*/
-#define CFG_DEVICE_NULLDEV	1
+#define CONFIG_SYS_CBSIZE		256		/* Console I/O Buffer Size	*/
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS		16		/* max number of command args	*/
+#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
+#define CONFIG_SYS_DEVICE_NULLDEV	1
 
-#define CFG_MEMTEST_START	0x9c000000	/* memtest works on	*/
-#define CFG_MEMTEST_END		0x9c400000	/* 4 ... 8 MB in DRAM	*/
+#define CONFIG_SYS_MEMTEST_START	0x9c000000	/* memtest works on	*/
+#define CONFIG_SYS_MEMTEST_END		0x9c400000	/* 4 ... 8 MB in DRAM	*/
 
-#undef	CFG_CLKS_IN_HZ		/* everything, incl board info, in Hz */
+#undef	CONFIG_SYS_CLKS_IN_HZ		/* everything, incl board info, in Hz */
 
-#define CFG_LOAD_ADDR	(CFG_DRAM_BASE + 0x8000) /* default load address */
+#define CONFIG_SYS_LOAD_ADDR	(CONFIG_SYS_DRAM_BASE + 0x8000) /* default load address */
 
-#define CFG_HZ			3250000		/* incrementer freq: 3.25 MHz */
+#define CONFIG_SYS_HZ			3250000		/* incrementer freq: 3.25 MHz */
 
 /* Monahans Core Frequency */
-#define CFG_MONAHANS_RUN_MODE_OSC_RATIO		16 /* valid values: 8, 16, 24, 31 */
-#define CFG_MONAHANS_TURBO_RUN_MODE_RATIO	1  /* valid values: 1, 2 */
+#define CONFIG_SYS_MONAHANS_RUN_MODE_OSC_RATIO		16 /* valid values: 8, 16, 24, 31 */
+#define CONFIG_SYS_MONAHANS_TURBO_RUN_MODE_RATIO	1  /* valid values: 1, 2 */
 
 						/* valid baudrates */
-#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
 
-/* #define CFG_MMC_BASE		0xF0000000 */
+/* #define CONFIG_SYS_MMC_BASE		0xF0000000 */
 
 /*
  * Stack sizes
@@ -178,26 +178,26 @@
 #define PHYS_SDRAM_4		0xac000000 /* SDRAM Bank #4 */
 #define PHYS_SDRAM_4_SIZE	0x00000000 /* 0 MB */
 
-#define CFG_DRAM_BASE		0x80000000 /* at CS0 */
-#define CFG_DRAM_SIZE		0x04000000 /* 64 MB Ram */
+#define CONFIG_SYS_DRAM_BASE		0x80000000 /* at CS0 */
+#define CONFIG_SYS_DRAM_SIZE		0x04000000 /* 64 MB Ram */
 
-#undef CFG_SKIP_DRAM_SCRUB
+#undef CONFIG_SYS_SKIP_DRAM_SCRUB
 
 
 /*
  * NAND Flash
  */
 #define CONFIG_NEW_NAND_CODE
-#define CFG_NAND0_BASE		0x0
-#undef CFG_NAND1_BASE
+#define CONFIG_SYS_NAND0_BASE		0x0
+#undef CONFIG_SYS_NAND1_BASE
 
-#define CFG_NAND_BASE_LIST	{ CFG_NAND0_BASE }
-#define CFG_MAX_NAND_DEVICE	1	/* Max number of NAND devices */
+#define CONFIG_SYS_NAND_BASE_LIST	{ CONFIG_SYS_NAND0_BASE }
+#define CONFIG_SYS_MAX_NAND_DEVICE	1	/* Max number of NAND devices */
 
 /* nand timeout values */
-#define CFG_NAND_PROG_ERASE_TO	3000
-#define CFG_NAND_OTHER_TO	100
-#define CFG_NAND_SENDCMD_RETRY	3
+#define CONFIG_SYS_NAND_PROG_ERASE_TO	3000
+#define CONFIG_SYS_NAND_OTHER_TO	100
+#define CONFIG_SYS_NAND_SENDCMD_RETRY	3
 #undef NAND_ALLOW_ERASE_ALL	/* Allow erasing bad blocks - don't use */
 
 /* NAND Timing Parameters (in ns) */
@@ -214,9 +214,9 @@
 #define NAND_TIMING_tAR		10
 
 /* NAND debugging */
-#define CFG_DFC_DEBUG1 /* usefull */
-#undef CFG_DFC_DEBUG2  /* noisy */
-#undef CFG_DFC_DEBUG3  /* extremly noisy  */
+#define CONFIG_SYS_DFC_DEBUG1 /* usefull */
+#undef CONFIG_SYS_DFC_DEBUG2  /* noisy */
+#undef CONFIG_SYS_DFC_DEBUG3  /* extremly noisy  */
 
 #define CONFIG_MTD_DEBUG
 #define CONFIG_MTD_DEBUG_VERBOSE 1
@@ -229,12 +229,12 @@
 #define NAND_MAX_FLOORS		1
 #define NAND_MAX_CHIPS		1
 
-#define CFG_NO_FLASH		1
+#define CONFIG_SYS_NO_FLASH		1
 
-#define CFG_ENV_IS_IN_NAND	1
-#define CFG_ENV_OFFSET		0x40000
-#define CFG_ENV_OFFSET_REDUND	0x44000
-#define CFG_ENV_SIZE		0x4000
+#define CONFIG_ENV_IS_IN_NAND	1
+#define CONFIG_ENV_OFFSET		0x40000
+#define CONFIG_ENV_OFFSET_REDUND	0x44000
+#define CONFIG_ENV_SIZE		0x4000
 
 
 #endif	/* __CONFIG_H */
diff --git a/include/dataflash.h b/include/dataflash.h
index de041397d..63b3bf963 100644
--- a/include/dataflash.h
+++ b/include/dataflash.h
@@ -40,7 +40,7 @@
 /*number of protected area*/
 #define NB_DATAFLASH_AREA		5
 
-#ifdef CFG_NO_FLASH
+#ifdef CONFIG_SYS_NO_FLASH
 
 /*-----------------------------------------------------------------------
  * return codes from flash_write():
@@ -66,7 +66,7 @@
  * Set Environment according to label:
  */
 # define	FLAG_SETENV		0x80
-#endif /* CFG_NO_FLASH */
+#endif /* CONFIG_SYS_NO_FLASH */
 
 /*define the area structure*/
 typedef struct {
@@ -213,7 +213,7 @@ extern void dataflash_print_info (void);
 extern void dataflash_perror (int err);
 extern void AT91F_DataflashSetEnv (void);
 
-extern struct dataflash_addr cs[CFG_MAX_DATAFLASH_BANKS];
+extern struct dataflash_addr cs[CONFIG_SYS_MAX_DATAFLASH_BANKS];
 extern dataflash_protect_t area_list[NB_DATAFLASH_AREA];
 extern AT91S_DATAFLASH_INFO dataflash_info[];
 #endif
diff --git a/include/devices.h b/include/devices.h
index 490016b69..6b78d5888 100644
--- a/include/devices.h
+++ b/include/devices.h
@@ -94,6 +94,7 @@ int	devices_init (void);
 int	device_deregister(char *devname);
 struct list_head* device_get_list(void);
 device_t* device_get_by_name(char* name);
+device_t* device_clone(device_t *dev);
 
 #ifdef CONFIG_LCD
 int	drv_lcd_init (void);
diff --git a/include/dtt.h b/include/dtt.h
index 0c8ee7693..399b64aba 100644
--- a/include/dtt.h
+++ b/include/dtt.h
@@ -31,6 +31,7 @@
     defined(CONFIG_DTT_ADT7460)	|| \
     defined(CONFIG_DTT_DS1621)	|| \
     defined(CONFIG_DTT_DS1775)	|| \
+    defined(CONFIG_DTT_LM63)	|| \
     defined(CONFIG_DTT_LM73)	|| \
     defined(CONFIG_DTT_LM75)	|| \
     defined(CONFIG_DTT_LM81)
@@ -42,12 +43,12 @@
 #define DTT_INDUSTRIAL_MAX_TEMP	85		/* -40 - +85 C */
 #define DTT_AUTOMOTIVE_MAX_TEMP	105		/* -40 - +105 C */
 
-#ifndef CFG_DTT_MAX_TEMP
-#define CFG_DTT_MAX_TEMP DTT_COMMERCIAL_MAX_TEMP
+#ifndef CONFIG_SYS_DTT_MAX_TEMP
+#define CONFIG_SYS_DTT_MAX_TEMP DTT_COMMERCIAL_MAX_TEMP
 #endif
 
-#ifndef CFG_DTT_HYSTERESIS
-#define CFG_DTT_HYSTERESIS	5		/* 5 C */
+#ifndef CONFIG_SYS_DTT_HYSTERESIS
+#define CONFIG_SYS_DTT_HYSTERESIS	5		/* 5 C */
 #endif
 #endif /* CONFIG_DTT_ADM1021 */
 
diff --git a/include/environment.h b/include/environment.h
index 481ea733d..ea6b4d12e 100644
--- a/include/environment.h
+++ b/include/environment.h
@@ -37,52 +37,52 @@
  **************************************************************************
  */
 
-#if defined(CFG_ENV_IS_IN_FLASH)
-# ifndef  CFG_ENV_ADDR
-#  define CFG_ENV_ADDR	(CFG_FLASH_BASE + CFG_ENV_OFFSET)
+#if defined(CONFIG_ENV_IS_IN_FLASH)
+# ifndef  CONFIG_ENV_ADDR
+#  define CONFIG_ENV_ADDR	(CONFIG_SYS_FLASH_BASE + CONFIG_ENV_OFFSET)
 # endif
-# ifndef  CFG_ENV_OFFSET
-#  define CFG_ENV_OFFSET (CFG_ENV_ADDR - CFG_FLASH_BASE)
+# ifndef  CONFIG_ENV_OFFSET
+#  define CONFIG_ENV_OFFSET (CONFIG_ENV_ADDR - CONFIG_SYS_FLASH_BASE)
 # endif
-# if !defined(CFG_ENV_ADDR_REDUND) && defined(CFG_ENV_OFFSET_REDUND)
-#  define CFG_ENV_ADDR_REDUND	(CFG_FLASH_BASE + CFG_ENV_OFFSET_REDUND)
+# if !defined(CONFIG_ENV_ADDR_REDUND) && defined(CONFIG_ENV_OFFSET_REDUND)
+#  define CONFIG_ENV_ADDR_REDUND	(CONFIG_SYS_FLASH_BASE + CONFIG_ENV_OFFSET_REDUND)
 # endif
-# if defined(CFG_ENV_SECT_SIZE) || defined(CFG_ENV_SIZE)
-#  ifndef  CFG_ENV_SECT_SIZE
-#   define CFG_ENV_SECT_SIZE	CFG_ENV_SIZE
+# if defined(CONFIG_ENV_SECT_SIZE) || defined(CONFIG_ENV_SIZE)
+#  ifndef  CONFIG_ENV_SECT_SIZE
+#   define CONFIG_ENV_SECT_SIZE	CONFIG_ENV_SIZE
 #  endif
-#  ifndef  CFG_ENV_SIZE
-#   define CFG_ENV_SIZE	CFG_ENV_SECT_SIZE
+#  ifndef  CONFIG_ENV_SIZE
+#   define CONFIG_ENV_SIZE	CONFIG_ENV_SECT_SIZE
 #  endif
 # else
-#  error "Both CFG_ENV_SECT_SIZE and CFG_ENV_SIZE undefined"
+#  error "Both CONFIG_ENV_SECT_SIZE and CONFIG_ENV_SIZE undefined"
 # endif
-# if defined(CFG_ENV_ADDR_REDUND) && !defined(CFG_ENV_SIZE_REDUND)
-#  define CFG_ENV_SIZE_REDUND	CFG_ENV_SIZE
+# if defined(CONFIG_ENV_ADDR_REDUND) && !defined(CONFIG_ENV_SIZE_REDUND)
+#  define CONFIG_ENV_SIZE_REDUND	CONFIG_ENV_SIZE
 # endif
-# if (CFG_ENV_ADDR >= CFG_MONITOR_BASE) && \
-     (CFG_ENV_ADDR+CFG_ENV_SIZE) <= (CFG_MONITOR_BASE + CFG_MONITOR_LEN)
+# if (CONFIG_ENV_ADDR >= CONFIG_SYS_MONITOR_BASE) && \
+     (CONFIG_ENV_ADDR+CONFIG_ENV_SIZE) <= (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)
 #  define ENV_IS_EMBEDDED	1
 # endif
-# if defined(CFG_ENV_ADDR_REDUND) || defined(CFG_ENV_OFFSET_REDUND)
-#  define CFG_REDUNDAND_ENVIRONMENT	1
+# if defined(CONFIG_ENV_ADDR_REDUND) || defined(CONFIG_ENV_OFFSET_REDUND)
+#  define CONFIG_SYS_REDUNDAND_ENVIRONMENT	1
 # endif
-#endif	/* CFG_ENV_IS_IN_FLASH */
+#endif	/* CONFIG_ENV_IS_IN_FLASH */
 
-#if defined(CFG_ENV_IS_IN_NAND)
-# ifndef CFG_ENV_OFFSET
-#  error "Need to define CFG_ENV_OFFSET when using CFG_ENV_IS_IN_NAND"
+#if defined(CONFIG_ENV_IS_IN_NAND)
+# ifndef CONFIG_ENV_OFFSET
+#  error "Need to define CONFIG_ENV_OFFSET when using CONFIG_ENV_IS_IN_NAND"
 # endif
-# ifndef CFG_ENV_SIZE
-#  error "Need to define CFG_ENV_SIZE when using CFG_ENV_IS_IN_NAND"
+# ifndef CONFIG_ENV_SIZE
+#  error "Need to define CONFIG_ENV_SIZE when using CONFIG_ENV_IS_IN_NAND"
 # endif
-# ifdef CFG_ENV_OFFSET_REDUND
-#  define CFG_REDUNDAND_ENVIRONMENT
+# ifdef CONFIG_ENV_OFFSET_REDUND
+#  define CONFIG_SYS_REDUNDAND_ENVIRONMENT
 # endif
-# ifdef CFG_ENV_IS_EMBEDDED
+# ifdef CONFIG_ENV_IS_EMBEDDED
 #  define ENV_IS_EMBEDDED	1
 # endif
-#endif /* CFG_ENV_IS_IN_NAND */
+#endif /* CONFIG_ENV_IS_IN_NAND */
 
 #ifdef USE_HOSTCC
 # include <stdint.h>
@@ -90,18 +90,18 @@
 # include <linux/types.h>
 #endif
 
-#ifdef CFG_REDUNDAND_ENVIRONMENT
+#ifdef CONFIG_SYS_REDUNDAND_ENVIRONMENT
 # define ENV_HEADER_SIZE	(sizeof(uint32_t) + 1)
 #else
 # define ENV_HEADER_SIZE	(sizeof(uint32_t))
 #endif
 
 
-#define ENV_SIZE (CFG_ENV_SIZE - ENV_HEADER_SIZE)
+#define ENV_SIZE (CONFIG_ENV_SIZE - ENV_HEADER_SIZE)
 
 typedef	struct environment_s {
 	uint32_t	crc;		/* CRC32 over data bytes	*/
-#ifdef CFG_REDUNDAND_ENVIRONMENT
+#ifdef CONFIG_SYS_REDUNDAND_ENVIRONMENT
 	unsigned char	flags;		/* active/obsolete flags	*/
 #endif
 	unsigned char	data[ENV_SIZE]; /* Environment data		*/
diff --git a/include/exports.h b/include/exports.h
index 6377875bc..0620e9eb8 100644
--- a/include/exports.h
+++ b/include/exports.h
@@ -25,6 +25,7 @@ char *getenv (char *name);
 int setenv (char *varname, char *varvalue);
 long simple_strtol(const char *cp,char **endp,unsigned int base);
 int strcmp(const char * cs,const char * ct);
+int ustrtoul(const char *cp, char **endp, unsigned int base);
 #ifdef CONFIG_HAS_UID
 void forceenv (char *varname, char *varvalue);
 #endif
diff --git a/include/fat.h b/include/fat.h
index 59de3fbec..c8b949362 100644
--- a/include/fat.h
+++ b/include/fat.h
@@ -67,7 +67,7 @@
 #define ATTR_VFAT     (ATTR_RO | ATTR_HIDDEN | ATTR_SYS | ATTR_VOLUME)
 
 #define DELETED_FLAG	((char)0xe5) /* Marks deleted files when in name[0] */
-#define aRING		0x05	     /* Used to represent 'å' in name[0] */
+#define aRING		0x05	     /* Used as special character in name[0] */
 
 /* Indicates that the entry is the last long entry in a set of long
  * dir entries
diff --git a/include/fdt.h b/include/fdt.h
index 48ccfd910..c51212e05 100644
--- a/include/fdt.h
+++ b/include/fdt.h
@@ -57,4 +57,6 @@ struct fdt_property {
 #define FDT_V16_SIZE	FDT_V3_SIZE
 #define FDT_V17_SIZE	(FDT_V16_SIZE + sizeof(uint32_t))
 
+/* adding a ramdisk needs 0x44 bytes in version 2008.10 */
+#define FDT_RAMDISK_OVERHEAD	0x80
 #endif /* _FDT_H */
diff --git a/include/fdt_support.h b/include/fdt_support.h
index 424c3c6b7..6062df976 100644
--- a/include/fdt_support.h
+++ b/include/fdt_support.h
@@ -28,7 +28,9 @@
 
 #include <fdt.h>
 
-int fdt_chosen(void *fdt, ulong initrd_start, ulong initrd_end, int force);
+u32 fdt_getprop_u32_default(void *fdt, const char *path, const char *prop,
+				const u32 dflt);
+int fdt_chosen(void *fdt, int force);
 int fdt_initrd(void *fdt, ulong initrd_start, ulong initrd_end, int force);
 void do_fixup_by_path(void *fdt, const char *path, const char *prop,
 		      const void *val, int len, int create);
@@ -63,6 +65,11 @@ void fdt_fixup_crypto_node(void *blob, int sec_rev);
 static inline void fdt_fixup_crypto_node(void *blob, int sec_rev) {}
 #endif
 
+#ifdef CONFIG_PCI
+#include <pci.h>
+int fdt_pci_dma_ranges(void *blob, int phb_off, struct pci_controller *hose);
+#endif
+
 #ifdef CONFIG_OF_BOARD_SETUP
 void ft_board_setup(void *blob, bd_t *bd);
 void ft_cpu_setup(void *blob, bd_t *bd);
diff --git a/include/flash.h b/include/flash.h
index af8a7c088..6e2981c5a 100644
--- a/include/flash.h
+++ b/include/flash.h
@@ -24,7 +24,7 @@
 #ifndef _FLASH_H_
 #define _FLASH_H_
 
-#ifndef CFG_NO_FLASH
+#ifndef CONFIG_SYS_NO_FLASH
 /*-----------------------------------------------------------------------
  * FLASH Info: contains chip specific data, per FLASH bank
  */
@@ -33,9 +33,9 @@ typedef struct {
 	ulong	size;			/* total bank size in bytes		*/
 	ushort	sector_count;		/* number of erase units		*/
 	ulong	flash_id;		/* combined device & manufacturer code	*/
-	ulong	start[CFG_MAX_FLASH_SECT];   /* physical sector start addresses */
-	uchar	protect[CFG_MAX_FLASH_SECT]; /* sector protection status	*/
-#ifdef CFG_FLASH_CFI
+	ulong	start[CONFIG_SYS_MAX_FLASH_SECT];   /* physical sector start addresses */
+	uchar	protect[CONFIG_SYS_MAX_FLASH_SECT]; /* sector protection status	*/
+#ifdef CONFIG_SYS_FLASH_CFI
 	uchar	portwidth;		/* the width of the port		*/
 	uchar	chipwidth;		/* the width of the chip		*/
 	ushort	buffer_size;		/* # of bytes in write buffer		*/
@@ -58,6 +58,8 @@ typedef struct {
 #endif
 } flash_info_t;
 
+typedef unsigned long flash_sect_t;
+
 /*
  * Values for the width of the port
  */
@@ -84,6 +86,9 @@ typedef struct {
 
 /* convert between bit value and numeric value */
 #define CFI_FLASH_SHIFT_WIDTH	3
+
+/* cfi-mtd device name */
+#define	CFI_MTD_DEV_NAME	"cfi-mtd"
 /* Prototypes */
 
 extern unsigned long flash_init (void);
@@ -91,6 +96,9 @@ extern void flash_print_info (flash_info_t *);
 extern int flash_erase	(flash_info_t *, int, int);
 extern int flash_sect_erase (ulong addr_first, ulong addr_last);
 extern int flash_sect_protect (int flag, ulong addr_first, ulong addr_last);
+extern int flash_sect_roundb (ulong *addr);
+extern unsigned long flash_sector_size(flash_info_t *info, flash_sect_t sect);
+extern void flash_set_verbose(uint);
 
 /* common/flash.c */
 extern void flash_protect (int flag, ulong from, ulong to, flash_info_t *info);
@@ -98,12 +106,17 @@ extern int flash_write (char *, ulong, ulong);
 extern flash_info_t *addr2info (ulong);
 extern int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt);
 
+/* drivers/mtd/cfi_mtd.c */
+#ifdef CONFIG_FLASH_CFI_MTD
+extern int cfi_mtd_init(void);
+#endif
+
 /* board/?/flash.c */
-#if defined(CFG_FLASH_PROTECTION)
+#if defined(CONFIG_SYS_FLASH_PROTECTION)
 extern int flash_real_protect(flash_info_t *info, long sector, int prot);
 extern void flash_read_user_serial(flash_info_t * info, void * buffer, int offset, int len);
 extern void flash_read_factory_serial(flash_info_t * info, void * buffer, int offset, int len);
-#endif	/* CFG_FLASH_PROTECTION */
+#endif	/* CONFIG_SYS_FLASH_PROTECTION */
 
 #ifdef CONFIG_FLASH_CFI_LEGACY
 extern ulong board_flash_get_legacy(ulong base, int banknum, flash_info_t *info);
@@ -485,6 +498,6 @@ extern int jedec_flash_match(flash_info_t *info, ulong base);
 #define FLASH_ERASE_TIMEOUT	120000	/* timeout for erasing in ms		*/
 #define FLASH_WRITE_TIMEOUT	500	/* timeout for writes  in ms		*/
 
-#endif /* !CFG_NO_FLASH */
+#endif /* !CONFIG_SYS_NO_FLASH */
 
 #endif /* _FLASH_H_ */
diff --git a/include/fpga.h b/include/fpga.h
index 52d93b100..a48b89b3c 100644
--- a/include/fpga.h
+++ b/include/fpga.h
@@ -40,13 +40,13 @@
 #endif
 
 /* CONFIG_FPGA bit assignments */
-#define CFG_FPGA_MAN(x)		(x)
-#define CFG_FPGA_DEV(x)		((x) << 8 )
-#define CFG_FPGA_IF(x)		((x) << 16 )
+#define CONFIG_SYS_FPGA_MAN(x)		(x)
+#define CONFIG_SYS_FPGA_DEV(x)		((x) << 8 )
+#define CONFIG_SYS_FPGA_IF(x)		((x) << 16 )
 
 /* FPGA Manufacturer bits in CONFIG_FPGA */
-#define CFG_FPGA_XILINX		CFG_FPGA_MAN( 0x1 )
-#define CFG_FPGA_ALTERA		CFG_FPGA_MAN( 0x2 )
+#define CONFIG_SYS_FPGA_XILINX		CONFIG_SYS_FPGA_MAN( 0x1 )
+#define CONFIG_SYS_FPGA_ALTERA		CONFIG_SYS_FPGA_MAN( 0x2 )
 
 
 /* fpga_xxxx function return value definitions */
diff --git a/include/galileo/core.h b/include/galileo/core.h
index 49f4dd2d2..c27750929 100644
--- a/include/galileo/core.h
+++ b/include/galileo/core.h
@@ -23,13 +23,13 @@ extern unsigned int INTERNAL_REG_BASE_ADDR;
 #define GT_64260	0  /* includes both 64260A and 64260B */
 #define GT_64261	1
 
-#if (CFG_GT_6426x == GT_64260)
+#if (CONFIG_SYS_GT_6426x == GT_64260)
 #ifdef CONFIG_ETHER_PORT_MII
 #define GAL_ETH_DEVS 2
 #else
 #define GAL_ETH_DEVS 3
 #endif
-#elif (CFG_GT_6426x == GT_64261)
+#elif (CONFIG_SYS_GT_6426x == GT_64261)
 #define GAL_ETH_DEVS 2
 #else
 #define GAL_ETH_DEVS 3	/* default to a 64260 */
diff --git a/include/hush.h b/include/hush.h
index 20e48dbef..0805ff3d8 100644
--- a/include/hush.h
+++ b/include/hush.h
@@ -32,4 +32,10 @@ extern int u_boot_hush_start(void);
 extern int parse_string_outer(char *, int);
 extern int parse_file_outer(void);
 
+int set_local_var(const char *s, int flg_export);
+void unset_local_var(const char *name);
+
+#if defined(CONFIG_HUSH_INIT_VAR)
+extern int hush_init_var (void);
+#endif
 #endif
diff --git a/include/i2c.h b/include/i2c.h
index a51c16464..fad2d5716 100644
--- a/include/i2c.h
+++ b/include/i2c.h
@@ -47,24 +47,47 @@
 #define I2C_RXTX_LEN	128	/* maximum tx/rx buffer length */
 
 #if defined(CONFIG_I2C_MULTI_BUS)
-#define CFG_MAX_I2C_BUS		2
+#define CONFIG_SYS_MAX_I2C_BUS		2
 #define I2C_GET_BUS()		i2c_get_bus_num()
 #define I2C_SET_BUS(a)		i2c_set_bus_num(a)
 #else
-#define CFG_MAX_I2C_BUS		1
+#define CONFIG_SYS_MAX_I2C_BUS		1
 #define I2C_GET_BUS()		0
 #define I2C_SET_BUS(a)
 #endif
 
 /* define the I2C bus number for RTC and DTT if not already done */
-#if !defined(CFG_RTC_BUS_NUM)
-#define CFG_RTC_BUS_NUM		0
+#if !defined(CONFIG_SYS_RTC_BUS_NUM)
+#define CONFIG_SYS_RTC_BUS_NUM		0
 #endif
-#if !defined(CFG_DTT_BUS_NUM)
-#define CFG_DTT_BUS_NUM		0
+#if !defined(CONFIG_SYS_DTT_BUS_NUM)
+#define CONFIG_SYS_DTT_BUS_NUM		0
+#endif
+#if !defined(CONFIG_SYS_SPD_BUS_NUM)
+#define CONFIG_SYS_SPD_BUS_NUM		0
+#endif
+
+#ifndef I2C_SOFT_DECLARATIONS
+# if defined(CONFIG_MPC8260)
+#  define I2C_SOFT_DECLARATIONS volatile ioport_t *iop = ioport_addr((immap_t *)CONFIG_SYS_IMMR, I2C_PORT);
+# elif defined(CONFIG_8xx)
+#  define I2C_SOFT_DECLARATIONS	volatile immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
+# else
+#  define I2C_SOFT_DECLARATIONS
+# endif
+#endif
+
+#ifdef CONFIG_8xx
+/* Set default values for the I2C bus speed and slave address on 8xx. In the
+ * future, we'll define these in all 8xx board config files.
+ */
+#ifndef	CONFIG_SYS_I2C_SPEED
+#define	CONFIG_SYS_I2C_SPEED	50000
+#endif
+
+#ifndef	CONFIG_SYS_I2C_SLAVE
+#define	CONFIG_SYS_I2C_SLAVE	0xFE
 #endif
-#if !defined(CFG_SPD_BUS_NUM)
-#define CFG_SPD_BUS_NUM		0
 #endif
 
 /*
@@ -72,10 +95,33 @@
  * repeatedly to change the speed and slave addresses.
  */
 void i2c_init(int speed, int slaveaddr);
-#ifdef CFG_I2C_INIT_BOARD
+#ifdef CONFIG_SYS_I2C_INIT_BOARD
 void i2c_init_board(void);
 #endif
 
+#if defined(CONFIG_I2C_MUX)
+
+typedef struct _mux {
+	uchar	chip;
+	uchar	channel;
+	char	*name;
+	struct _mux	*next;
+} I2C_MUX;
+
+typedef struct _mux_device {
+	int	busid;
+	I2C_MUX	*mux;	/* List of muxes, to reach the device */
+	struct _mux_device	*next;
+} I2C_MUX_DEVICE;
+
+int	i2c_mux_add_device(I2C_MUX_DEVICE *dev);
+
+I2C_MUX_DEVICE	*i2c_mux_search_device(int id);
+I2C_MUX_DEVICE *i2c_mux_ident_muxstring (uchar *buf);
+int i2x_mux_select_mux(int bus);
+int i2c_mux_ident_muxstring_f (uchar *buf);
+#endif
+
 /*
  * Probe the given I2C chip address.  Returns 0 if a chip responded,
  * not 0 on failure.
@@ -100,8 +146,52 @@ int i2c_write(uchar chip, uint addr, int alen, uchar *buffer, int len);
 /*
  * Utility routines to read/write registers.
  */
-uchar i2c_reg_read (uchar chip, uchar reg);
-void  i2c_reg_write(uchar chip, uchar reg, uchar val);
+static inline u8 i2c_reg_read(u8 addr, u8 reg)
+{
+	u8 buf;
+
+#ifdef CONFIG_8xx
+	/* MPC8xx needs this.  Maybe one day we can get rid of it. */
+	i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
+#endif
+
+#ifdef DEBUG
+	printf("%s: addr=0x%02x, reg=0x%02x\n", __func__, addr, reg);
+#endif
+
+#ifdef CONFIG_BLACKFIN
+	/* This ifdef will become unneccessary in a future version of the
+	 * blackfin I2C driver.
+	 */
+	i2c_read(addr, reg, 0, &buf, 1);
+#else
+	i2c_read(addr, reg, 1, &buf, 1);
+#endif
+
+	return buf;
+}
+
+static inline void i2c_reg_write(u8 addr, u8 reg, u8 val)
+{
+#ifdef CONFIG_8xx
+	/* MPC8xx needs this.  Maybe one day we can get rid of it. */
+	i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
+#endif
+
+#ifdef DEBUG
+	printf("%s: addr=0x%02x, reg=0x%02x, val=0x%02x\n",
+	       __func__, addr, reg, val);
+#endif
+
+#ifdef CONFIG_BLACKFIN
+	/* This ifdef will become unneccessary in a future version of the
+	 * blackfin I2C driver.
+	 */
+	i2c_write(addr, reg, 0, &val, 1);
+#else
+	i2c_write(addr, reg, 1, &val, 1);
+#endif
+}
 
 /*
  * Functions for setting the current I2C bus and its speed
diff --git a/include/i8042.h b/include/i8042.h
index f77239fdd..13952899b 100644
--- a/include/i8042.h
+++ b/include/i8042.h
@@ -35,9 +35,9 @@
 
 /* defines */
 
-#define I8042_DATA_REG      (CFG_ISA_IO + 0x0060)    /* keyboard i/o buffer */
-#define I8042_STATUS_REG    (CFG_ISA_IO + 0x0064)    /* keyboard status read */
-#define I8042_COMMAND_REG   (CFG_ISA_IO + 0x0064)    /* keyboard ctrl write */
+#define I8042_DATA_REG      (CONFIG_SYS_ISA_IO + 0x0060)    /* keyboard i/o buffer */
+#define I8042_STATUS_REG    (CONFIG_SYS_ISA_IO + 0x0064)    /* keyboard status read */
+#define I8042_COMMAND_REG   (CONFIG_SYS_ISA_IO + 0x0064)    /* keyboard ctrl write */
 
 #define KBD_US              0        /* default US layout */
 #define KBD_GER             1        /* german layout */
diff --git a/include/ide.h b/include/ide.h
index 222f4f84e..ddb9579f8 100644
--- a/include/ide.h
+++ b/include/ide.h
@@ -26,7 +26,7 @@
 
 #define	IDE_BUS(dev)	(dev >> 1)
 
-#define	ATA_CURR_BASE(dev)	(CFG_ATA_BASE_ADDR+ide_bus_offset[IDE_BUS(dev)])
+#define	ATA_CURR_BASE(dev)	(CONFIG_SYS_ATA_BASE_ADDR+ide_bus_offset[IDE_BUS(dev)])
 
 #ifdef CONFIG_IDE_LED
 
@@ -40,7 +40,7 @@
 
 #endif /* CONFIG_IDE_LED */
 
-#ifdef CFG_64BIT_LBA
+#ifdef CONFIG_SYS_64BIT_LBA
 typedef uint64_t lbaint_t;
 #else
 typedef ulong lbaint_t;
diff --git a/include/image.h b/include/image.h
index 9be806e12..4609200b8 100644
--- a/include/image.h
+++ b/include/image.h
@@ -33,26 +33,24 @@
 #ifndef __IMAGE_H__
 #define __IMAGE_H__
 
-#include <asm/byteorder.h>
-#include <command.h>
-
-#ifndef USE_HOSTCC
-#include <lmb.h>
-#include <linux/string.h>
-#include <asm/u-boot.h>
-
-#else
+#if USE_HOSTCC
+#include <endian.h>
 
 /* new uImage format support enabled on host */
 #define CONFIG_FIT		1
 #define CONFIG_OF_LIBFDT	1
 #define CONFIG_FIT_VERBOSE	1 /* enable fit_format_{error,warning}() */
 
+#else
+
+#include <lmb.h>
+#include <linux/string.h>
+#include <asm/u-boot.h>
+#include <asm/byteorder.h>
+
 #endif /* USE_HOSTCC */
 
-#if defined(CONFIG_FIT) && !defined(CONFIG_OF_LIBFDT)
-#error "CONFIG_OF_LIBFDT not enabled, required by CONFIG_FIT!"
-#endif
+#include <command.h>
 
 #if defined(CONFIG_FIT)
 #include <fdt.h>
@@ -85,6 +83,7 @@
 #define IH_OS_RTEMS		18	/* RTEMS	*/
 #define IH_OS_ARTOS		19	/* ARTOS	*/
 #define IH_OS_UNITY		20	/* Unity OS	*/
+#define IH_OS_INTEGRITY		21	/* INTEGRITY	*/
 
 /*
  * CPU Architecture Codes (supported by Linux)
@@ -164,6 +163,7 @@
 #define IH_COMP_NONE		0	/*  No	 Compression Used	*/
 #define IH_COMP_GZIP		1	/* gzip	 Compression Used	*/
 #define IH_COMP_BZIP2		2	/* bzip2 Compression Used	*/
+#define IH_COMP_LZMA		3	/* lzma  Compression Used	*/
 
 #define IH_MAGIC	0x27051956	/* Image Magic Number		*/
 #define IH_NMLEN		32	/* Image Name Length		*/
@@ -226,6 +226,7 @@ typedef struct bootm_headers {
 #endif
 #endif
 
+#ifndef USE_HOSTCC
 	image_info_t	os;		/* os image info */
 	ulong		ep;		/* entry point of OS */
 
@@ -236,8 +237,25 @@ typedef struct bootm_headers {
 #endif
 	ulong		ft_len;		/* length of flat device tree */
 
+	ulong		initrd_start;
+	ulong		initrd_end;
+	ulong		cmdline_start;
+	ulong		cmdline_end;
+	bd_t		*kbd;
+#endif
+
 	int		verify;		/* getenv("verify")[0] != 'n' */
-	int		valid;		/* set to 1 if we've set values in the header */
+
+#define	BOOTM_STATE_START	(0x00000001)
+#define	BOOTM_STATE_LOADOS	(0x00000002)
+#define	BOOTM_STATE_RAMDISK	(0x00000004)
+#define	BOOTM_STATE_FDT		(0x00000008)
+#define	BOOTM_STATE_OS_CMDLINE	(0x00000010)
+#define	BOOTM_STATE_OS_BD_T	(0x00000020)
+#define	BOOTM_STATE_OS_PREP	(0x00000040)
+#define	BOOTM_STATE_OS_GO	(0x00000080)
+	int		state;
+
 #ifndef USE_HOSTCC
 	struct lmb	lmb;		/* for memory mgmt */
 #endif
@@ -573,6 +591,7 @@ int fit_image_hash_set_value (void *fit, int noffset, uint8_t *value,
 				int value_len);
 
 int fit_image_check_hashes (const void *fit, int noffset);
+int fit_all_image_check_hashes (const void *fit);
 int fit_image_check_os (const void *fit, int noffset, uint8_t os);
 int fit_image_check_arch (const void *fit, int noffset, uint8_t arch);
 int fit_image_check_type (const void *fit, int noffset, uint8_t type);
diff --git a/include/iomux.h b/include/iomux.h
new file mode 100644
index 000000000..257c1f761
--- /dev/null
+++ b/include/iomux.h
@@ -0,0 +1,48 @@
+/*
+ * (C) Copyright 2008
+ * Gary Jennejohn, DENX Software Engineering GmbH, garyj@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ *This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef _IO_MUX_H
+#define _IO_MUX_H
+
+#include <devices.h>
+
+/*
+ * Stuff required to support console multiplexing.
+ */
+
+/*
+ * Pointers to devices used for each file type.  Defined in console.c
+ * but storage is allocated in iomux.c.
+ */
+extern device_t **console_devices[MAX_FILES];
+/*
+ * The count of devices assigned to each FILE.  Defined in console.c
+ * and populated in iomux.c.
+ */
+extern int cd_count[MAX_FILES];
+
+int iomux_doenv(const int, const char *);
+void iomux_printdevs(const int);
+device_t *search_device(int, char *);
+
+#endif /* _IO_MUX_H */
diff --git a/include/jffs2/jffs2.h b/include/jffs2/jffs2.h
index d142cd1bc..ed96babf6 100644
--- a/include/jffs2/jffs2.h
+++ b/include/jffs2/jffs2.h
@@ -50,6 +50,9 @@
 #define JFFS2_EMPTY_BITMASK 0xffff
 #define JFFS2_DIRTY_BITMASK 0x0000
 
+/* Summary node MAGIC marker */
+#define JFFS2_SUM_MAGIC	0x02851885
+
 /* We only allow a single char for length, and 0xFF is empty flash so
    we don't want it confused with a real length. Hence max 254.
 */
@@ -89,6 +92,7 @@
 #define JFFS2_NODETYPE_INODE (JFFS2_FEATURE_INCOMPAT | JFFS2_NODE_ACCURATE | 2)
 #define JFFS2_NODETYPE_CLEANMARKER (JFFS2_FEATURE_RWCOMPAT_DELETE | JFFS2_NODE_ACCURATE | 3)
 #define JFFS2_NODETYPE_PADDING (JFFS2_FEATURE_RWCOMPAT_DELETE | JFFS2_NODE_ACCURATE | 4)
+#define JFFS2_NODETYPE_SUMMARY (JFFS2_FEATURE_RWCOMPAT_DELETE | JFFS2_NODE_ACCURATE | 6)
 
 /* Maybe later... */
 /*#define JFFS2_NODETYPE_CHECKPOINT (JFFS2_FEATURE_RWCOMPAT_DELETE | JFFS2_NODE_ACCURATE | 3) */
@@ -166,9 +170,24 @@ struct jffs2_raw_inode
 /*	__u8 data[dsize]; */
 } __attribute__((packed));
 
+struct jffs2_raw_summary
+{
+	__u16 magic;
+	__u16 nodetype; 	/* = JFFS2_NODETYPE_SUMMARY */
+	__u32 totlen;
+	__u32 hdr_crc;
+	__u32 sum_num;	/* number of sum entries*/
+	__u32 cln_mkr;	/* clean marker size, 0 = no cleanmarker */
+	__u32 padded;	/* sum of the size of padding nodes */
+	__u32 sum_crc;	/* summary information crc */
+	__u32 node_crc; 	/* node crc */
+	__u32 sum[0]; 	/* inode summary info */
+};
+
 union jffs2_node_union {
 	struct jffs2_raw_inode i;
 	struct jffs2_raw_dirent d;
+	struct jffs2_raw_summary s;
 	struct jffs2_unknown_node u;
 } __attribute__((packed));
 
diff --git a/include/jffs2/load_kernel.h b/include/jffs2/load_kernel.h
index 882a80ea3..8b2720e95 100644
--- a/include/jffs2/load_kernel.h
+++ b/include/jffs2/load_kernel.h
@@ -28,9 +28,12 @@
 #include <linux/list.h>
 
 /* mtd device types */
-#define MTD_DEV_TYPE_NOR      0x0001
-#define MTD_DEV_TYPE_NAND     0x0002
-#define MTD_DEV_TYPE(type) ((type == MTD_DEV_TYPE_NAND) ? "nand" : "nor")
+#define MTD_DEV_TYPE_NOR	0x0001
+#define MTD_DEV_TYPE_NAND	0x0002
+#define MTD_DEV_TYPE_ONENAND	0x0004
+
+#define MTD_DEV_TYPE(type) ((type == MTD_DEV_TYPE_NAND) ? "nand" :	\
+			(type == MTD_DEV_TYPE_ONENAND) ? "onenand" : "nor")
 
 struct mtd_device {
 	struct list_head link;
@@ -47,6 +50,7 @@ struct part_info {
 	u32 offset;			/* offset within device */
 	void *jffs2_priv;		/* used internaly by jffs2 */
 	u32 mask_flags;			/* kernel MTD mask flags */
+	u32 sector_size;		/* size of sector */
 	struct mtd_device *dev;		/* parent device */
 };
 
@@ -70,4 +74,9 @@ struct mtdids {
 #define putLabeledWord(x, y)	printf("%s %08x\n", x, (unsigned int)y)
 #define led_blink(x, y, z, a)
 
+/* common/cmd_jffs2.c */
+extern int mtdparts_init(void);
+extern int find_dev_and_part(const char *id, struct mtd_device **dev,
+				u8 *part_num, struct part_info **part);
+
 #endif /* load_kernel_h */
diff --git a/include/lcd.h b/include/lcd.h
index 44ac8ef8c..512221e9c 100644
--- a/include/lcd.h
+++ b/include/lcd.h
@@ -197,6 +197,8 @@ void	lcd_putc	(const char c);
 void	lcd_puts	(const char *s);
 void	lcd_printf	(const char *fmt, ...);
 
+/* Allow boards to customize the information displayed */
+void lcd_show_board_info(void);
 
 /************************************************************************/
 /* ** BITMAP DISPLAY SUPPORT						*/
@@ -211,8 +213,8 @@ void	lcd_printf	(const char *fmt, ...);
  *  the LCD controller and memory allocation. Someone has to know what
  *  is connected, as we can't autodetect anything.
  */
-#define CFG_HIGH	0	/* Pins are active high			*/
-#define CFG_LOW		1	/* Pins are active low			*/
+#define CONFIG_SYS_HIGH	0	/* Pins are active high			*/
+#define CONFIG_SYS_LOW		1	/* Pins are active low			*/
 
 #define LCD_MONOCHROME	0
 #define LCD_COLOR2	1
diff --git a/include/lh7a40x.h b/include/lh7a40x.h
index c897a7cee..09a463c84 100644
--- a/include/lh7a40x.h
+++ b/include/lh7a40x.h
@@ -273,7 +273,7 @@ typedef struct {
 #define LH7A40X_GPIOINT_PTR     ((lh7a40x_gpioint_t*) LH7A40X_GPIOINT_BASE)
 
 /* Embedded SRAM */
-#define CFG_SRAM_BASE	(0xB0000000)
-#define CFG_SRAM_SIZE	(80*1024)	/* 80kB */
+#define CONFIG_SYS_SRAM_BASE	(0xB0000000)
+#define CONFIG_SYS_SRAM_SIZE	(80*1024)	/* 80kB */
 
 #endif  /* __LH7A40X_H__ */
diff --git a/include/libfdt.h b/include/libfdt.h
index 94c35e330..ce374fded 100644
--- a/include/libfdt.h
+++ b/include/libfdt.h
@@ -122,7 +122,7 @@
 /* Low-level functions (you probably don't need these)                */
 /**********************************************************************/
 
-const void *fdt_offset_ptr(const void *fdt, int offset, int checklen);
+const void *fdt_offset_ptr(const void *fdt, int offset, unsigned int checklen);
 static inline void *fdt_offset_ptr_w(void *fdt, int offset, int checklen)
 {
 	return (void *)(uintptr_t)fdt_offset_ptr(fdt, offset, checklen);
@@ -459,6 +459,32 @@ static inline void *fdt_getprop_w(void *fdt, int nodeoffset,
 uint32_t fdt_get_phandle(const void *fdt, int nodeoffset);
 
 /**
+ * fdt_get_alias_namelen - get alias based on substring
+ * @fdt: pointer to the device tree blob
+ * @name: name of the alias th look up
+ * @namelen: number of characters of name to consider
+ *
+ * Identical to fdt_get_alias(), but only examine the first namelen
+ * characters of name for matching the alias name.
+ */
+const char *fdt_get_alias_namelen(const void *fdt,
+				  const char *name, int namelen);
+
+/**
+ * fdt_get_alias - retreive the path referenced by a given alias
+ * @fdt: pointer to the device tree blob
+ * @name: name of the alias th look up
+ *
+ * fdt_get_alias() retrieves the value of a given alias.  That is, the
+ * value of the property named 'name' in the node /aliases.
+ *
+ * returns:
+ *	a pointer to the expansion of the alias named 'name', of it exists
+ *	NULL, if the given alias or the /aliases node does not exist
+ */
+const char *fdt_get_alias(const void *fdt, const char *name);
+
+/**
  * fdt_get_path - determine the full path of a node
  * @fdt: pointer to the device tree blob
  * @nodeoffset: offset of the node whose path to find
diff --git a/include/libfdt_env.h b/include/libfdt_env.h
index 671c3a898..ea474a56b 100644
--- a/include/libfdt_env.h
+++ b/include/libfdt_env.h
@@ -24,20 +24,30 @@
 #ifdef USE_HOSTCC
 #include <stdint.h>
 #include <string.h>
+#include <endian.h>
+#include <byteswap.h>
 #else
 #include <linux/string.h>
 #include <linux/types.h>
+#include <asm/byteorder.h>
 #endif /* USE_HOSTCC */
 
 #include <stddef.h>
-#include <asm/byteorder.h>
 extern struct fdt_header *working_fdt;  /* Pointer to the working fdt */
 
-#define fdt32_to_cpu(x)		__be32_to_cpu(x)
-#define cpu_to_fdt32(x)		__cpu_to_be32(x)
-#define fdt64_to_cpu(x)		__be64_to_cpu(x)
-#define cpu_to_fdt64(x)		__cpu_to_be64(x)
+#if __BYTE_ORDER == __LITTLE_ENDIAN
+#define fdt32_to_cpu(x)		bswap_32(x)
+#define cpu_to_fdt32(x)		bswap_32(x)
+#define fdt64_to_cpu(x)		bswap_64(x)
+#define cpu_to_fdt64(x)		bswap_64(x)
+#else
+#define fdt32_to_cpu(x)		(x)
+#define cpu_to_fdt32(x)		(x)
+#define fdt64_to_cpu(x)		(x)
+#define cpu_to_fdt64(x)		(x)
+#endif
 
+#ifndef USE_HOSTCC
 /*
  * Types for `void *' pointers.
  *
@@ -49,5 +59,6 @@ typedef unsigned long int       uintptr_t;
 #else
 typedef unsigned int            uintptr_t;
 #endif
+#endif /* not USE_HOSTCC */
 
 #endif /* _LIBFDT_ENV_H */
diff --git a/include/linux/crc32.h b/include/linux/crc32.h
new file mode 100644
index 000000000..ac4aed1c7
--- /dev/null
+++ b/include/linux/crc32.h
@@ -0,0 +1,27 @@
+/*
+ * crc32.h
+ * See linux/lib/crc32.c for license and changes
+ */
+#ifndef _LINUX_CRC32_H
+#define _LINUX_CRC32_H
+
+#include <linux/types.h>
+/* #include <linux/bitrev.h> */
+
+extern u32  crc32_le(u32 crc, unsigned char const *p, size_t len);
+/* extern u32  crc32_be(u32 crc, unsigned char const *p, size_t len); */
+
+#define crc32(seed, data, length)  crc32_le(seed, (unsigned char const *)data, length)
+
+/*
+ * Helpers for hash table generation of ethernet nics:
+ *
+ * Ethernet sends the least significant bit of a byte first, thus crc32_le
+ * is used. The output of crc32_le is bit reversed [most significant bit
+ * is in bit nr 0], thus it must be reversed before use. Except for
+ * nics that bit swap the result internally...
+ */
+/* #define ether_crc(length, data)    bitrev32(crc32_le(~0, data, length)) */
+/* #define ether_crc_le(length, data) crc32_le(~0, data, length) */
+
+#endif /* _LINUX_CRC32_H */
diff --git a/include/linux/list.h b/include/linux/list.h
index aeeeb21a1..b78851c3d 100644
--- a/include/linux/list.h
+++ b/include/linux/list.h
@@ -344,7 +344,7 @@ static inline void list_splice_tail_init(struct list_head *list,
  */
 #define list_for_each(pos, head) \
 	for (pos = (head)->next; prefetch(pos->next), pos != (head); \
-        	pos = pos->next)
+		pos = pos->next)
 
 /**
  * __list_for_each	-	iterate over a list
@@ -366,7 +366,7 @@ static inline void list_splice_tail_init(struct list_head *list,
  */
 #define list_for_each_prev(pos, head) \
 	for (pos = (head)->prev; prefetch(pos->prev), pos != (head); \
-        	pos = pos->prev)
+		pos = pos->prev)
 
 /**
  * list_for_each_safe - iterate over a list safe against removal of list entry
@@ -397,7 +397,7 @@ static inline void list_splice_tail_init(struct list_head *list,
  */
 #define list_for_each_entry(pos, head, member)				\
 	for (pos = list_entry((head)->next, typeof(*pos), member);	\
-	     prefetch(pos->member.next), &pos->member != (head); 	\
+	     prefetch(pos->member.next), &pos->member != (head);	\
 	     pos = list_entry(pos->member.next, typeof(*pos), member))
 
 /**
@@ -408,7 +408,7 @@ static inline void list_splice_tail_init(struct list_head *list,
  */
 #define list_for_each_entry_reverse(pos, head, member)			\
 	for (pos = list_entry((head)->prev, typeof(*pos), member);	\
-	     prefetch(pos->member.prev), &pos->member != (head); 	\
+	     prefetch(pos->member.prev), &pos->member != (head);	\
 	     pos = list_entry(pos->member.prev, typeof(*pos), member))
 
 /**
@@ -458,7 +458,7 @@ static inline void list_splice_tail_init(struct list_head *list,
  *
  * Iterate over list of given type, continuing from current position.
  */
-#define list_for_each_entry_from(pos, head, member) 			\
+#define list_for_each_entry_from(pos, head, member)			\
 	for (; prefetch(pos->member.next), &pos->member != (head);	\
 	     pos = list_entry(pos->member.next, typeof(*pos), member))
 
@@ -472,7 +472,7 @@ static inline void list_splice_tail_init(struct list_head *list,
 #define list_for_each_entry_safe(pos, n, head, member)			\
 	for (pos = list_entry((head)->next, typeof(*pos), member),	\
 		n = list_entry(pos->member.next, typeof(*pos), member);	\
-	     &pos->member != (head); 					\
+	     &pos->member != (head);					\
 	     pos = n, n = list_entry(n->member.next, typeof(*n), member))
 
 /**
@@ -486,7 +486,7 @@ static inline void list_splice_tail_init(struct list_head *list,
  * safe against removal of list entry.
  */
 #define list_for_each_entry_safe_continue(pos, n, head, member) 		\
-	for (pos = list_entry(pos->member.next, typeof(*pos), member), 		\
+	for (pos = list_entry(pos->member.next, typeof(*pos), member),		\
 		n = list_entry(pos->member.next, typeof(*pos), member);		\
 	     &pos->member != (head);						\
 	     pos = n, n = list_entry(n->member.next, typeof(*n), member))
@@ -501,7 +501,7 @@ static inline void list_splice_tail_init(struct list_head *list,
  * Iterate over list of given type from current point, safe against
  * removal of list entry.
  */
-#define list_for_each_entry_safe_from(pos, n, head, member) 			\
+#define list_for_each_entry_safe_from(pos, n, head, member)			\
 	for (n = list_entry(pos->member.next, typeof(*pos), member);		\
 	     &pos->member != (head);						\
 	     pos = n, n = list_entry(n->member.next, typeof(*n), member))
@@ -519,7 +519,7 @@ static inline void list_splice_tail_init(struct list_head *list,
 #define list_for_each_entry_safe_reverse(pos, n, head, member)		\
 	for (pos = list_entry((head)->prev, typeof(*pos), member),	\
 		n = list_entry(pos->member.prev, typeof(*pos), member);	\
-	     &pos->member != (head); 					\
+	     &pos->member != (head);					\
 	     pos = n, n = list_entry(n->member.prev, typeof(*n), member))
 
 /*
@@ -665,9 +665,9 @@ static inline void hlist_add_after(struct hlist_node *n,
  * @head:	the head for your list.
  * @member:	the name of the hlist_node within the struct.
  */
-#define hlist_for_each_entry_safe(tpos, pos, n, head, member) 		 \
+#define hlist_for_each_entry_safe(tpos, pos, n, head, member)		 \
 	for (pos = (head)->first;					 \
-	     pos && ({ n = pos->next; 1; }) && 				 \
+	     pos && ({ n = pos->next; 1; }) &&				 \
 		({ tpos = hlist_entry(pos, typeof(*tpos), member); 1;}); \
 	     pos = n)
 
diff --git a/include/linux/mtd/blktrans.h b/include/linux/mtd/blktrans.h
index d1ded51d7..32acb6ce9 100644
--- a/include/linux/mtd/blktrans.h
+++ b/include/linux/mtd/blktrans.h
@@ -1,6 +1,4 @@
 /*
- * $Id: blktrans.h,v 1.6 2005/11/07 11:14:54 gleixner Exp $
- *
  * (C) 2003 David Woodhouse <dwmw2@infradead.org>
  *
  * Interface to Linux block layer for MTD 'translation layers'.
diff --git a/include/linux/mtd/doc2000.h b/include/linux/mtd/doc2000.h
index 12de2845a..ba29d53ec 100644
--- a/include/linux/mtd/doc2000.h
+++ b/include/linux/mtd/doc2000.h
@@ -6,8 +6,6 @@
  * Copyright (C) 2002-2003 Greg Ungerer <gerg@snapgear.com>
  * Copyright (C) 2002-2003 SnapGear Inc
  *
- * $Id: doc2000.h,v 1.25 2005/11/07 11:14:54 gleixner Exp $
- *
  * Released under GPL
  */
 
diff --git a/include/linux/mtd/mtd.h b/include/linux/mtd/mtd.h
index 55d33dd11..354e3a0bc 100644
--- a/include/linux/mtd/mtd.h
+++ b/include/linux/mtd/mtd.h
@@ -1,6 +1,4 @@
 /*
- * $Id: mtd.h,v 1.61 2005/11/07 11:14:54 gleixner Exp $
- *
  * Copyright (C) 1999-2003 David Woodhouse <dwmw2@infradead.org> et al.
  *
  * Released under GPL
@@ -132,7 +130,7 @@ struct mtd_info {
 	u_int32_t oobavail;  /* Available OOB bytes per block */
 
 	/* Kernel-only stuff starts here. */
-	char *name;
+	const char *name;
 	int index;
 
 	/* ecc layout structure pointer - read only ! */
@@ -144,18 +142,36 @@ struct mtd_info {
 	int numeraseregions;
 	struct mtd_erase_region_info *eraseregions;
 
+	/*
+	 * Erase is an asynchronous operation.  Device drivers are supposed
+	 * to call instr->callback() whenever the operation completes, even
+	 * if it completes with a failure.
+	 * Callers are supposed to pass a callback function and wait for it
+	 * to be called before writing to the block.
+	 */
 	int (*erase) (struct mtd_info *mtd, struct erase_info *instr);
 
 	/* This stuff for eXecute-In-Place */
-	int (*point) (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char **mtdbuf);
+	/* phys is optional and may be set to NULL */
+	int (*point) (struct mtd_info *mtd, loff_t from, size_t len,
+			size_t *retlen, void **virt, phys_addr_t *phys);
 
 	/* We probably shouldn't allow XIP if the unpoint isn't a NULL */
-	void (*unpoint) (struct mtd_info *mtd, u_char * addr, loff_t from, size_t len);
+	void (*unpoint) (struct mtd_info *mtd, loff_t from, size_t len);
 
 
 	int (*read) (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf);
 	int (*write) (struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen, const u_char *buf);
 
+	/* In blackbox flight recorder like scenarios we want to make successful
+	   writes in interrupt context. panic_write() is only intended to be
+	   called when its known the kernel is about to panic and we need the
+	   write to succeed. Since the kernel is not going to be running for much
+	   longer, this function can break locks and delay to ensure the write
+	   succeeds (but not sleep). */
+
+	int (*panic_write) (struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen, const u_char *buf);
+
 	int (*read_oob) (struct mtd_info *mtd, loff_t from,
 			 struct mtd_oob_ops *ops);
 	int (*write_oob) (struct mtd_info *mtd, loff_t to,
@@ -274,7 +290,11 @@ static inline void mtd_erase_callback(struct erase_info *instr)
 			printk(KERN_INFO args);		\
 	} while(0)
 #else /* CONFIG_MTD_DEBUG */
-#define MTDDEBUG(n, args...) do { } while(0)
+#define MTDDEBUG(n, args...)				\
+	do {						\
+		if (0)					\
+			printk(KERN_INFO args);		\
+	} while(0)
 #endif /* CONFIG_MTD_DEBUG */
 
 #endif /* __MTD_MTD_H__ */
diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h
index 7ac72de95..24ad2bdaa 100644
--- a/include/linux/mtd/nand.h
+++ b/include/linux/mtd/nand.h
@@ -1,12 +1,10 @@
 /*
  *  linux/include/linux/mtd/nand.h
  *
- *  Copyright (c) 2000 David Woodhouse <dwmw2@mvhi.com>
+ *  Copyright (c) 2000 David Woodhouse <dwmw2@infradead.org>
  *                     Steven J. Hill <sjhill@realitydiluted.com>
  *		       Thomas Gleixner <tglx@linutronix.de>
  *
- * $Id: nand.h,v 1.74 2005/09/15 13:58:50 vwool Exp $
- *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
@@ -31,6 +29,7 @@
 
 #include "linux/mtd/compat.h"
 #include "linux/mtd/mtd.h"
+#include "linux/mtd/bbm.h"
 
 
 struct mtd_info;
@@ -190,6 +189,9 @@ typedef enum {
 #define NAND_MUST_PAD(chip) (!(chip->options & NAND_NO_PADDING))
 #define NAND_HAS_CACHEPROG(chip) ((chip->options & NAND_CACHEPRG))
 #define NAND_HAS_COPYBACK(chip) ((chip->options & NAND_COPYBACK))
+/* Large page NAND with SOFT_ECC should support subpage reads */
+#define NAND_SUBPAGE_READ(chip) ((chip->ecc.mode == NAND_ECC_SOFT) \
+					&& (chip->page_shift > 9))
 
 /* Mask to zero out the chip options, which come from the id table */
 #define NAND_CHIPOPTIONS_MSK	(0x0000ffff & ~NAND_NO_AUTOINCR)
@@ -278,6 +280,10 @@ struct nand_ecc_ctrl {
 	int			(*read_page)(struct mtd_info *mtd,
 					     struct nand_chip *chip,
 					     uint8_t *buf);
+	int			(*read_subpage)(struct mtd_info *mtd,
+					     struct nand_chip *chip,
+					     uint32_t offs, uint32_t len,
+					     uint8_t *buf);
 	void			(*write_page)(struct mtd_info *mtd,
 					      struct nand_chip *chip,
 					      const uint8_t *buf);
@@ -435,6 +441,7 @@ struct nand_chip {
 #define NAND_MFR_STMICRO	0x20
 #define NAND_MFR_HYNIX		0xad
 #define NAND_MFR_MICRON		0x2c
+#define NAND_MFR_AMD		0x01
 
 /**
  * struct nand_flash_dev - NAND Flash Device ID Structure
@@ -474,75 +481,6 @@ extern struct nand_manufacturers nand_manuf_ids[];
 #define NAND_MAX_CHIPS 8
 #endif
 
-/**
- * struct nand_bbt_descr - bad block table descriptor
- * @options:	options for this descriptor
- * @pages:	the page(s) where we find the bbt, used with option BBT_ABSPAGE
- *		when bbt is searched, then we store the found bbts pages here.
- *		Its an array and supports up to 8 chips now
- * @offs:	offset of the pattern in the oob area of the page
- * @veroffs:	offset of the bbt version counter in the oob are of the page
- * @version:	version read from the bbt page during scan
- * @len:	length of the pattern, if 0 no pattern check is performed
- * @maxblocks:	maximum number of blocks to search for a bbt. This number of
- *		blocks is reserved at the end of the device where the tables are
- *		written.
- * @reserved_block_code: if non-0, this pattern denotes a reserved (rather than
- *              bad) block in the stored bbt
- * @pattern:	pattern to identify bad block table or factory marked good /
- *		bad blocks, can be NULL, if len = 0
- *
- * Descriptor for the bad block table marker and the descriptor for the
- * pattern which identifies good and bad blocks. The assumption is made
- * that the pattern and the version count are always located in the oob area
- * of the first block.
- */
-struct nand_bbt_descr {
-	int	options;
-	int	pages[NAND_MAX_CHIPS];
-	int	offs;
-	int	veroffs;
-	uint8_t	version[NAND_MAX_CHIPS];
-	int	len;
-	int	maxblocks;
-	int	reserved_block_code;
-	uint8_t	*pattern;
-};
-
-/* Options for the bad block table descriptors */
-
-/* The number of bits used per block in the bbt on the device */
-#define NAND_BBT_NRBITS_MSK	0x0000000F
-#define NAND_BBT_1BIT		0x00000001
-#define NAND_BBT_2BIT		0x00000002
-#define NAND_BBT_4BIT		0x00000004
-#define NAND_BBT_8BIT		0x00000008
-/* The bad block table is in the last good block of the device */
-#define	NAND_BBT_LASTBLOCK	0x00000010
-/* The bbt is at the given page, else we must scan for the bbt */
-#define NAND_BBT_ABSPAGE	0x00000020
-/* The bbt is at the given page, else we must scan for the bbt */
-#define NAND_BBT_SEARCH		0x00000040
-/* bbt is stored per chip on multichip devices */
-#define NAND_BBT_PERCHIP	0x00000080
-/* bbt has a version counter at offset veroffs */
-#define NAND_BBT_VERSION	0x00000100
-/* Create a bbt if none axists */
-#define NAND_BBT_CREATE		0x00000200
-/* Search good / bad pattern through all pages of a block */
-#define NAND_BBT_SCANALLPAGES	0x00000400
-/* Scan block empty during good / bad block scan */
-#define NAND_BBT_SCANEMPTY	0x00000800
-/* Write bbt if neccecary */
-#define NAND_BBT_WRITE		0x00001000
-/* Read and write back block contents when writing bbt */
-#define NAND_BBT_SAVECONTENT	0x00002000
-/* Search good / bad pattern on the first and the second page */
-#define NAND_BBT_SCAN2NDPAGE	0x00004000
-
-/* The maximum number of blocks to scan for a bbt */
-#define NAND_BBT_SCAN_MAXBLOCKS	4
-
 extern int nand_scan_bbt(struct mtd_info *mtd, struct nand_bbt_descr *bd);
 extern int nand_update_bbt(struct mtd_info *mtd, loff_t offs);
 extern int nand_default_bbt(struct mtd_info *mtd);
diff --git a/include/linux/mtd/nand_ecc.h b/include/linux/mtd/nand_ecc.h
index 12c5bc342..090da5054 100644
--- a/include/linux/mtd/nand_ecc.h
+++ b/include/linux/mtd/nand_ecc.h
@@ -3,8 +3,6 @@
  *
  *  Copyright (C) 2000 Steven J. Hill (sjhill@realitydiluted.com)
  *
- * $Id: nand_ecc.h,v 1.4 2004/06/17 02:35:02 dbrown Exp $
- *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
diff --git a/include/linux/mtd/nftl.h b/include/linux/mtd/nftl.h
index 6731a16e7..fe22e0dce 100644
--- a/include/linux/mtd/nftl.h
+++ b/include/linux/mtd/nftl.h
@@ -1,6 +1,4 @@
 /*
- * $Id: nftl.h,v 1.16 2004/06/30 14:49:00 dbrown Exp $
- *
  * (C) 1999-2003 David Woodhouse <dwmw2@infradead.org>
  */
 
@@ -43,6 +41,11 @@ struct NFTLrecord {
 int NFTL_mount(struct NFTLrecord *s);
 int NFTL_formatblock(struct NFTLrecord *s, int block);
 
+int nftl_read_oob(struct mtd_info *mtd, loff_t offs, size_t len,
+		  size_t *retlen, uint8_t *buf);
+int nftl_write_oob(struct mtd_info *mtd, loff_t offs, size_t len,
+		   size_t *retlen, uint8_t *buf);
+
 #ifndef NFTL_MAJOR
 #define NFTL_MAJOR 93
 #endif
diff --git a/include/linux/mtd/onenand.h b/include/linux/mtd/onenand.h
index 420eb140a..4467c2bb2 100644
--- a/include/linux/mtd/onenand.h
+++ b/include/linux/mtd/onenand.h
@@ -51,6 +51,7 @@ struct onenand_bufferram {
  * @param page_shift	[INTERN] number of address bits in a page
  * @param ppb_shift	[INTERN] number of address bits in a pages per block
  * @param page_mask	[INTERN] a page per block mask
+ * @param writesize	[INTERN] a real page size
  * @param bufferam_index	[INTERN] BufferRAM index
  * @param bufferam	[INTERN] BufferRAM info
  * @param readw		[REPLACEABLE] hardware specific function for read short
diff --git a/include/linux/mtd/onenand_regs.h b/include/linux/mtd/onenand_regs.h
index 6a8aa28b1..a245e14bf 100644
--- a/include/linux/mtd/onenand_regs.h
+++ b/include/linux/mtd/onenand_regs.h
@@ -67,12 +67,16 @@
 /*
  * Device ID Register F001h (R)
  */
+#define ONENAND_DEVICE_DENSITY_MASK	(0xf)
 #define ONENAND_DEVICE_DENSITY_SHIFT	(4)
 #define ONENAND_DEVICE_IS_DDP		(1 << 3)
 #define ONENAND_DEVICE_IS_DEMUX		(1 << 2)
 #define ONENAND_DEVICE_VCC_MASK		(0x3)
 
 #define ONENAND_DEVICE_DENSITY_512Mb	(0x002)
+#define ONENAND_DEVICE_DENSITY_1Gb	(0x003)
+#define ONENAND_DEVICE_DENSITY_2Gb	(0x004)
+#define ONENAND_DEVICE_DENSITY_4Gb	(0x005)
 
 /*
  * Version ID Register F002h (R)
@@ -110,6 +114,8 @@
 #define ONENAND_CMD_READOOB		(0x13)
 #define ONENAND_CMD_PROG		(0x80)
 #define ONENAND_CMD_PROGOOB		(0x1A)
+#define ONENAND_CMD_2X_PROG		(0x7D)
+#define ONENAND_CMD_2X_CACHE_PROG	(0x7F)
 #define ONENAND_CMD_UNLOCK		(0x23)
 #define ONENAND_CMD_LOCK		(0x2A)
 #define ONENAND_CMD_LOCK_TIGHT		(0x2C)
diff --git a/include/linux/mtd/partitions.h b/include/linux/mtd/partitions.h
new file mode 100644
index 000000000..10166757b
--- /dev/null
+++ b/include/linux/mtd/partitions.h
@@ -0,0 +1,84 @@
+/*
+ * MTD partitioning layer definitions
+ *
+ * (C) 2000 Nicolas Pitre <nico@cam.org>
+ *
+ * This code is GPL
+ *
+ * $Id: partitions.h,v 1.17 2005/11/07 11:14:55 gleixner Exp $
+ */
+
+#ifndef MTD_PARTITIONS_H
+#define MTD_PARTITIONS_H
+
+#include <linux/types.h>
+
+
+/*
+ * Partition definition structure:
+ *
+ * An array of struct partition is passed along with a MTD object to
+ * add_mtd_partitions() to create them.
+ *
+ * For each partition, these fields are available:
+ * name: string that will be used to label the partition's MTD device.
+ * size: the partition size; if defined as MTDPART_SIZ_FULL, the partition
+ * 	will extend to the end of the master MTD device.
+ * offset: absolute starting position within the master MTD device; if
+ * 	defined as MTDPART_OFS_APPEND, the partition will start where the
+ * 	previous one ended; if MTDPART_OFS_NXTBLK, at the next erase block.
+ * mask_flags: contains flags that have to be masked (removed) from the
+ * 	master MTD flag set for the corresponding MTD partition.
+ * 	For example, to force a read-only partition, simply adding
+ * 	MTD_WRITEABLE to the mask_flags will do the trick.
+ *
+ * Note: writeable partitions require their size and offset be
+ * erasesize aligned (e.g. use MTDPART_OFS_NEXTBLK).
+ */
+
+struct mtd_partition {
+	char *name;			/* identifier string */
+	u_int32_t size;			/* partition size */
+	u_int32_t offset;		/* offset within the master MTD space */
+	u_int32_t mask_flags;		/* master MTD flags to mask out for this partition */
+	struct nand_ecclayout *ecclayout;	/* out of band layout for this partition (NAND only)*/
+	struct mtd_info **mtdp;		/* pointer to store the MTD object */
+};
+
+#define MTDPART_OFS_NXTBLK	(-2)
+#define MTDPART_OFS_APPEND	(-1)
+#define MTDPART_SIZ_FULL	(0)
+
+
+int add_mtd_partitions(struct mtd_info *, const struct mtd_partition *, int);
+int del_mtd_partitions(struct mtd_info *);
+
+#if 0
+/*
+ * Functions dealing with the various ways of partitioning the space
+ */
+
+struct mtd_part_parser {
+	struct list_head list;
+	struct module *owner;
+	const char *name;
+	int (*parse_fn)(struct mtd_info *, struct mtd_partition **, unsigned long);
+};
+
+extern int register_mtd_parser(struct mtd_part_parser *parser);
+extern int deregister_mtd_parser(struct mtd_part_parser *parser);
+extern int parse_mtd_partitions(struct mtd_info *master, const char **types,
+				struct mtd_partition **pparts, unsigned long origin);
+
+#define put_partition_parser(p) do { module_put((p)->owner); } while(0)
+
+struct device;
+struct device_node;
+
+int __devinit of_mtd_parse_partitions(struct device *dev,
+				      struct mtd_info *mtd,
+				      struct device_node *node,
+				      struct mtd_partition **pparts);
+#endif
+
+#endif
diff --git a/include/linux/mtd/ubi.h b/include/linux/mtd/ubi.h
new file mode 100644
index 000000000..4b3e06ce5
--- /dev/null
+++ b/include/linux/mtd/ubi.h
@@ -0,0 +1,186 @@
+/*
+ * Copyright (c) International Business Machines Corp., 2006
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ * Author: Artem Bityutskiy (Битюцкий �ртём)
+ */
+
+#ifndef __LINUX_UBI_H__
+#define __LINUX_UBI_H__
+
+/* #include <asm/ioctl.h> */
+#include <linux/types.h>
+#include <mtd/ubi-user.h>
+
+/*
+ * enum ubi_open_mode - UBI volume open mode constants.
+ *
+ * UBI_READONLY: read-only mode
+ * UBI_READWRITE: read-write mode
+ * UBI_EXCLUSIVE: exclusive mode
+ */
+enum {
+	UBI_READONLY = 1,
+	UBI_READWRITE,
+	UBI_EXCLUSIVE
+};
+
+/**
+ * struct ubi_volume_info - UBI volume description data structure.
+ * @vol_id: volume ID
+ * @ubi_num: UBI device number this volume belongs to
+ * @size: how many physical eraseblocks are reserved for this volume
+ * @used_bytes: how many bytes of data this volume contains
+ * @used_ebs: how many physical eraseblocks of this volume actually contain any
+ * data
+ * @vol_type: volume type (%UBI_DYNAMIC_VOLUME or %UBI_STATIC_VOLUME)
+ * @corrupted: non-zero if the volume is corrupted (static volumes only)
+ * @upd_marker: non-zero if the volume has update marker set
+ * @alignment: volume alignment
+ * @usable_leb_size: how many bytes are available in logical eraseblocks of
+ * this volume
+ * @name_len: volume name length
+ * @name: volume name
+ * @cdev: UBI volume character device major and minor numbers
+ *
+ * The @corrupted flag is only relevant to static volumes and is always zero
+ * for dynamic ones. This is because UBI does not care about dynamic volume
+ * data protection and only cares about protecting static volume data.
+ *
+ * The @upd_marker flag is set if the volume update operation was interrupted.
+ * Before touching the volume data during the update operation, UBI first sets
+ * the update marker flag for this volume. If the volume update operation was
+ * further interrupted, the update marker indicates this. If the update marker
+ * is set, the contents of the volume is certainly damaged and a new volume
+ * update operation has to be started.
+ *
+ * To put it differently, @corrupted and @upd_marker fields have different
+ * semantics:
+ *     o the @corrupted flag means that this static volume is corrupted for some
+ *       reasons, but not because an interrupted volume update
+ *     o the @upd_marker field means that the volume is damaged because of an
+ *       interrupted update operation.
+ *
+ * I.e., the @corrupted flag is never set if the @upd_marker flag is set.
+ *
+ * The @used_bytes and @used_ebs fields are only really needed for static
+ * volumes and contain the number of bytes stored in this static volume and how
+ * many eraseblock this data occupies. In case of dynamic volumes, the
+ * @used_bytes field is equivalent to @size*@usable_leb_size, and the @used_ebs
+ * field is equivalent to @size.
+ *
+ * In general, logical eraseblock size is a property of the UBI device, not
+ * of the UBI volume. Indeed, the logical eraseblock size depends on the
+ * physical eraseblock size and on how much bytes UBI headers consume. But
+ * because of the volume alignment (@alignment), the usable size of logical
+ * eraseblocks if a volume may be less. The following equation is true:
+ * 	@usable_leb_size = LEB size - (LEB size mod @alignment),
+ * where LEB size is the logical eraseblock size defined by the UBI device.
+ *
+ * The alignment is multiple to the minimal flash input/output unit size or %1
+ * if all the available space is used.
+ *
+ * To put this differently, alignment may be considered is a way to change
+ * volume logical eraseblock sizes.
+ */
+struct ubi_volume_info {
+	int ubi_num;
+	int vol_id;
+	int size;
+	long long used_bytes;
+	int used_ebs;
+	int vol_type;
+	int corrupted;
+	int upd_marker;
+	int alignment;
+	int usable_leb_size;
+	int name_len;
+	const char *name;
+	dev_t cdev;
+};
+
+/**
+ * struct ubi_device_info - UBI device description data structure.
+ * @ubi_num: ubi device number
+ * @leb_size: logical eraseblock size on this UBI device
+ * @min_io_size: minimal I/O unit size
+ * @ro_mode: if this device is in read-only mode
+ * @cdev: UBI character device major and minor numbers
+ *
+ * Note, @leb_size is the logical eraseblock size offered by the UBI device.
+ * Volumes of this UBI device may have smaller logical eraseblock size if their
+ * alignment is not equivalent to %1.
+ */
+struct ubi_device_info {
+	int ubi_num;
+	int leb_size;
+	int min_io_size;
+	int ro_mode;
+	dev_t cdev;
+};
+
+/* UBI descriptor given to users when they open UBI volumes */
+struct ubi_volume_desc;
+
+int ubi_get_device_info(int ubi_num, struct ubi_device_info *di);
+void ubi_get_volume_info(struct ubi_volume_desc *desc,
+			 struct ubi_volume_info *vi);
+struct ubi_volume_desc *ubi_open_volume(int ubi_num, int vol_id, int mode);
+struct ubi_volume_desc *ubi_open_volume_nm(int ubi_num, const char *name,
+					   int mode);
+void ubi_close_volume(struct ubi_volume_desc *desc);
+int ubi_leb_read(struct ubi_volume_desc *desc, int lnum, char *buf, int offset,
+		 int len, int check);
+int ubi_leb_write(struct ubi_volume_desc *desc, int lnum, const void *buf,
+		  int offset, int len, int dtype);
+int ubi_leb_change(struct ubi_volume_desc *desc, int lnum, const void *buf,
+		   int len, int dtype);
+int ubi_leb_erase(struct ubi_volume_desc *desc, int lnum);
+int ubi_leb_unmap(struct ubi_volume_desc *desc, int lnum);
+int ubi_leb_map(struct ubi_volume_desc *desc, int lnum, int dtype);
+int ubi_is_mapped(struct ubi_volume_desc *desc, int lnum);
+
+/*
+ * This function is the same as the 'ubi_leb_read()' function, but it does not
+ * provide the checking capability.
+ */
+static inline int ubi_read(struct ubi_volume_desc *desc, int lnum, char *buf,
+			   int offset, int len)
+{
+	return ubi_leb_read(desc, lnum, buf, offset, len, 0);
+}
+
+/*
+ * This function is the same as the 'ubi_leb_write()' functions, but it does
+ * not have the data type argument.
+ */
+static inline int ubi_write(struct ubi_volume_desc *desc, int lnum,
+			    const void *buf, int offset, int len)
+{
+	return ubi_leb_write(desc, lnum, buf, offset, len, UBI_UNKNOWN);
+}
+
+/*
+ * This function is the same as the 'ubi_leb_change()' functions, but it does
+ * not have the data type argument.
+ */
+static inline int ubi_change(struct ubi_volume_desc *desc, int lnum,
+				    const void *buf, int len)
+{
+	return ubi_leb_change(desc, lnum, buf, len, UBI_UNKNOWN);
+}
+
+#endif /* !__LINUX_UBI_H__ */
diff --git a/include/linux/rbtree.h b/include/linux/rbtree.h
new file mode 100644
index 000000000..6ff28e026
--- /dev/null
+++ b/include/linux/rbtree.h
@@ -0,0 +1,160 @@
+/*
+  Red Black Trees
+  (C) 1999  Andrea Arcangeli <andrea@suse.de>
+
+  This program is free software; you can redistribute it and/or modify
+  it under the terms of the GNU General Public License as published by
+  the Free Software Foundation; either version 2 of the License, or
+  (at your option) any later version.
+
+  This program is distributed in the hope that it will be useful,
+  but WITHOUT ANY WARRANTY; without even the implied warranty of
+  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+  GNU General Public License for more details.
+
+  You should have received a copy of the GNU General Public License
+  along with this program; if not, write to the Free Software
+  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+
+  linux/include/linux/rbtree.h
+
+  To use rbtrees you'll have to implement your own insert and search cores.
+  This will avoid us to use callbacks and to drop drammatically performances.
+  I know it's not the cleaner way,  but in C (not in C++) to get
+  performances and genericity...
+
+  Some example of insert and search follows here. The search is a plain
+  normal search over an ordered tree. The insert instead must be implemented
+  int two steps: as first thing the code must insert the element in
+  order as a red leaf in the tree, then the support library function
+  rb_insert_color() must be called. Such function will do the
+  not trivial work to rebalance the rbtree if necessary.
+
+-----------------------------------------------------------------------
+static inline struct page * rb_search_page_cache(struct inode * inode,
+						 unsigned long offset)
+{
+	struct rb_node * n = inode->i_rb_page_cache.rb_node;
+	struct page * page;
+
+	while (n)
+	{
+		page = rb_entry(n, struct page, rb_page_cache);
+
+		if (offset < page->offset)
+			n = n->rb_left;
+		else if (offset > page->offset)
+			n = n->rb_right;
+		else
+			return page;
+	}
+	return NULL;
+}
+
+static inline struct page * __rb_insert_page_cache(struct inode * inode,
+						   unsigned long offset,
+						   struct rb_node * node)
+{
+	struct rb_node ** p = &inode->i_rb_page_cache.rb_node;
+	struct rb_node * parent = NULL;
+	struct page * page;
+
+	while (*p)
+	{
+		parent = *p;
+		page = rb_entry(parent, struct page, rb_page_cache);
+
+		if (offset < page->offset)
+			p = &(*p)->rb_left;
+		else if (offset > page->offset)
+			p = &(*p)->rb_right;
+		else
+			return page;
+	}
+
+	rb_link_node(node, parent, p);
+
+	return NULL;
+}
+
+static inline struct page * rb_insert_page_cache(struct inode * inode,
+						 unsigned long offset,
+						 struct rb_node * node)
+{
+	struct page * ret;
+	if ((ret = __rb_insert_page_cache(inode, offset, node)))
+		goto out;
+	rb_insert_color(node, &inode->i_rb_page_cache);
+ out:
+	return ret;
+}
+-----------------------------------------------------------------------
+*/
+
+#ifndef	_LINUX_RBTREE_H
+#define	_LINUX_RBTREE_H
+
+#include <linux/stddef.h>
+
+struct rb_node
+{
+	unsigned long  rb_parent_color;
+#define	RB_RED		0
+#define	RB_BLACK	1
+	struct rb_node *rb_right;
+	struct rb_node *rb_left;
+} __attribute__((aligned(sizeof(long))));
+    /* The alignment might seem pointless, but allegedly CRIS needs it */
+
+struct rb_root
+{
+	struct rb_node *rb_node;
+};
+
+
+#define rb_parent(r)   ((struct rb_node *)((r)->rb_parent_color & ~3))
+#define rb_color(r)   ((r)->rb_parent_color & 1)
+#define rb_is_red(r)   (!rb_color(r))
+#define rb_is_black(r) rb_color(r)
+#define rb_set_red(r)  do { (r)->rb_parent_color &= ~1; } while (0)
+#define rb_set_black(r)  do { (r)->rb_parent_color |= 1; } while (0)
+
+static inline void rb_set_parent(struct rb_node *rb, struct rb_node *p)
+{
+	rb->rb_parent_color = (rb->rb_parent_color & 3) | (unsigned long)p;
+}
+static inline void rb_set_color(struct rb_node *rb, int color)
+{
+	rb->rb_parent_color = (rb->rb_parent_color & ~1) | color;
+}
+
+#define RB_ROOT	(struct rb_root) { NULL, }
+#define	rb_entry(ptr, type, member) container_of(ptr, type, member)
+
+#define RB_EMPTY_ROOT(root)	((root)->rb_node == NULL)
+#define RB_EMPTY_NODE(node)	(rb_parent(node) == node)
+#define RB_CLEAR_NODE(node)	(rb_set_parent(node, node))
+
+extern void rb_insert_color(struct rb_node *, struct rb_root *);
+extern void rb_erase(struct rb_node *, struct rb_root *);
+
+/* Find logical next and previous nodes in a tree */
+extern struct rb_node *rb_next(struct rb_node *);
+extern struct rb_node *rb_prev(struct rb_node *);
+extern struct rb_node *rb_first(struct rb_root *);
+extern struct rb_node *rb_last(struct rb_root *);
+
+/* Fast replacement of a single node without remove/rebalance/add/rebalance */
+extern void rb_replace_node(struct rb_node *victim, struct rb_node *new,
+			    struct rb_root *root);
+
+static inline void rb_link_node(struct rb_node * node, struct rb_node * parent,
+				struct rb_node ** rb_link)
+{
+	node->rb_parent_color = (unsigned long )parent;
+	node->rb_left = node->rb_right = NULL;
+
+	*rb_link = node;
+}
+
+#endif	/* _LINUX_RBTREE_H */
diff --git a/include/linux/types.h b/include/linux/types.h
index df4808fcd..1b0b4a44c 100644
--- a/include/linux/types.h
+++ b/include/linux/types.h
@@ -119,6 +119,30 @@ typedef		__s64		int64_t;
  * Below are truly Linux-specific types that should never collide with
  * any application/library that wants linux/types.h.
  */
+#ifdef __CHECKER__
+#define __bitwise__ __attribute__((bitwise))
+#else
+#define __bitwise__
+#endif
+#ifdef __CHECK_ENDIAN__
+#define __bitwise __bitwise__
+#else
+#define __bitwise
+#endif
+
+typedef __u16 __bitwise __le16;
+typedef __u16 __bitwise __be16;
+typedef __u32 __bitwise __le32;
+typedef __u32 __bitwise __be32;
+#if defined(__GNUC__)
+typedef __u64 __bitwise __le64;
+typedef __u64 __bitwise __be64;
+#endif
+typedef __u16 __bitwise __sum16;
+typedef __u32 __bitwise __wsum;
+
+
+typedef unsigned __bitwise__	gfp_t;
 
 struct ustat {
 	__kernel_daddr_t	f_tfree;
diff --git a/board/xilinx/xupv2p/xupv2p.c b/include/lzma/LzmaDecode.h
index b48103fdc..8fdb2c086 100644
--- a/board/xilinx/xupv2p/xupv2p.c
+++ b/include/lzma/LzmaDecode.h
@@ -1,7 +1,8 @@
 /*
- * (C) Copyright 2007 Michal Simek
+ * Fake include for LzmaDecode.h
  *
- * Michal  SIMEK <monstr@monstr.eu>
+ * Copyright (C) 2007-2008 Industrie Dial Face S.p.A.
+ * Luigi 'Comio' Mantellini (luigi.mantellini@idf-hit.com)
  *
  * See file CREDITS for list of people who contributed to this
  * project.
@@ -22,28 +23,9 @@
  * MA 02111-1307 USA
  */
 
-/* This is a board specific file.  It's OK to include board specific
- * header files */
+#ifndef __LZMADECODE_H__FAKE__
+#define __LZMADECODE_H__FAKE__
 
-#include <common.h>
-#include <config.h>
+#include "../../lib_generic/lzma/LzmaDecode.h"
 
-void do_reset (void)
-{
-#ifdef CFG_GPIO_0
-	*((unsigned long *)(CFG_GPIO_0_ADDR)) =
-	    ++(*((unsigned long *)(CFG_GPIO_0_ADDR)));
 #endif
-#ifdef CFG_RESET_ADDRESS
-	puts ("Reseting board\n");
-	asm ("bra r0");
-#endif
-}
-
-int gpio_init (void)
-{
-#ifdef CFG_GPIO_0
-	*((unsigned long *)(CFG_GPIO_0_ADDR)) = 0x0;
-#endif
-	return 0;
-}
diff --git a/include/lzma/LzmaTools.h b/include/lzma/LzmaTools.h
new file mode 100644
index 000000000..7c5eea113
--- /dev/null
+++ b/include/lzma/LzmaTools.h
@@ -0,0 +1,31 @@
+/*
+ * Fake include for LzmaTools.h
+ *
+ * Copyright (C) 2007-2008 Industrie Dial Face S.p.A.
+ * Luigi 'Comio' Mantellini (luigi.mantellini@idf-hit.com)
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __LZMATOOLS_H__FAKE__
+#define __LZMATOOLS_H__FAKE__
+
+#include "../../lib_generic/lzma/LzmaTools.h"
+
+#endif
diff --git a/include/lzma/LzmaTypes.h b/include/lzma/LzmaTypes.h
new file mode 100644
index 000000000..02daa5917
--- /dev/null
+++ b/include/lzma/LzmaTypes.h
@@ -0,0 +1,31 @@
+/*
+ * Fake include for LzmaTypes.h
+ *
+ * Copyright (C) 2007-2008 Industrie Dial Face S.p.A.
+ * Luigi 'Comio' Mantellini (luigi.mantellini@idf-hit.com)
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __LZMATYPES_H__FAKE__
+#define __LZMATYPES_H__FAKE__
+
+#include "../../lib_generic/lzma/LzmaTypes.h"
+
+#endif
diff --git a/include/miiphy.h b/include/miiphy.h
index 5518a0a89..32f0a6140 100644
--- a/include/miiphy.h
+++ b/include/miiphy.h
@@ -42,7 +42,7 @@ int miiphy_reset (char *devname, unsigned char addr);
 int miiphy_speed (char *devname, unsigned char addr);
 int miiphy_duplex (char *devname, unsigned char addr);
 int miiphy_is_1000base_x (char *devname, unsigned char addr);
-#ifdef CFG_FAULT_ECHO_LINK_DOWN
+#ifdef CONFIG_SYS_FAULT_ECHO_LINK_DOWN
 int miiphy_link (char *devname, unsigned char addr);
 #endif
 
diff --git a/include/mk48t59.h b/include/mk48t59.h
index a4459c092..e213fb898 100644
--- a/include/mk48t59.h
+++ b/include/mk48t59.h
@@ -28,9 +28,9 @@
 
 #if defined(CONFIG_RTC_MK48T59) && defined(CONFIG_CMD_DATE)
 
-#define RTC_PORT_ADDR0		CFG_ISA_IO +  0x70
+#define RTC_PORT_ADDR0		CONFIG_SYS_ISA_IO +  0x70
 #define RTC_PORT_ADDR1		RTC_PORT_ADDR0 +  0x1
-#define RTC_PORT_DATA		CFG_ISA_IO +  0x76
+#define RTC_PORT_DATA		CONFIG_SYS_ISA_IO +  0x76
 
 /* RTC Offsets */
 #define RTC_SECONDS             0x1FF9
diff --git a/include/mpc106.h b/include/mpc106.h
index 10ed0f463..ef5a95f78 100644
--- a/include/mpc106.h
+++ b/include/mpc106.h
@@ -35,7 +35,7 @@
  */
 #define	MPC106_REG			0x80000000
 
-#ifdef CFG_ADDRESS_MAP_A
+#ifdef CONFIG_SYS_ADDRESS_MAP_A
 #define MPC106_REG_ADDR			0x80000cf8
 #define	MPC106_REG_DATA			0x80000cfc
 #define MPC106_ISA_IO_PHYS		0x80000000
diff --git a/include/mpc512x.h b/include/mpc512x.h
index cb418d1e9..05a206358 100644
--- a/include/mpc512x.h
+++ b/include/mpc512x.h
@@ -572,7 +572,7 @@ void iopin_initialize(iopin_t *,int);
 #define IOCTRL_MUX_DDR		0x00000036
 
  /* Register Offset Base */
-#define MPC512X_FEC		(CFG_IMMR + 0x02800)
+#define MPC512X_FEC		(CONFIG_SYS_IMMR + 0x02800)
 
 /* Number of I2C buses */
 #define I2C_BUS_CNT	3
diff --git a/include/mpc5xx.h b/include/mpc5xx.h
index 414651fa0..de6d215d3 100644
--- a/include/mpc5xx.h
+++ b/include/mpc5xx.h
@@ -42,7 +42,7 @@
  * ISB bit in IMMR to set internal memory map
  */
 
-#define CFG_ISB			((CFG_IMMR / 0x00400000) << 1)
+#define CONFIG_SYS_ISB			((CONFIG_SYS_IMMR / 0x00400000) << 1)
 
 /*-----------------------------------------------------------------------
  * SYPCR - System Protection Control Register
diff --git a/include/mpc5xxx.h b/include/mpc5xxx.h
index 0f5bee574..3a3282152 100644
--- a/include/mpc5xxx.h
+++ b/include/mpc5xxx.h
@@ -52,75 +52,75 @@
 
 /* Internal memory map */
 
-#define MPC5XXX_CS0_START	(CFG_MBAR + 0x0004)
-#define MPC5XXX_CS0_STOP	(CFG_MBAR + 0x0008)
-#define MPC5XXX_CS1_START	(CFG_MBAR + 0x000c)
-#define MPC5XXX_CS1_STOP	(CFG_MBAR + 0x0010)
-#define MPC5XXX_CS2_START	(CFG_MBAR + 0x0014)
-#define MPC5XXX_CS2_STOP	(CFG_MBAR + 0x0018)
-#define MPC5XXX_CS3_START	(CFG_MBAR + 0x001c)
-#define MPC5XXX_CS3_STOP	(CFG_MBAR + 0x0020)
-#define MPC5XXX_CS4_START	(CFG_MBAR + 0x0024)
-#define MPC5XXX_CS4_STOP	(CFG_MBAR + 0x0028)
-#define MPC5XXX_CS5_START	(CFG_MBAR + 0x002c)
-#define MPC5XXX_CS5_STOP	(CFG_MBAR + 0x0030)
-#define MPC5XXX_BOOTCS_START	(CFG_MBAR + 0x004c)
-#define MPC5XXX_BOOTCS_STOP	(CFG_MBAR + 0x0050)
-#define MPC5XXX_ADDECR		(CFG_MBAR + 0x0054)
+#define MPC5XXX_CS0_START	(CONFIG_SYS_MBAR + 0x0004)
+#define MPC5XXX_CS0_STOP	(CONFIG_SYS_MBAR + 0x0008)
+#define MPC5XXX_CS1_START	(CONFIG_SYS_MBAR + 0x000c)
+#define MPC5XXX_CS1_STOP	(CONFIG_SYS_MBAR + 0x0010)
+#define MPC5XXX_CS2_START	(CONFIG_SYS_MBAR + 0x0014)
+#define MPC5XXX_CS2_STOP	(CONFIG_SYS_MBAR + 0x0018)
+#define MPC5XXX_CS3_START	(CONFIG_SYS_MBAR + 0x001c)
+#define MPC5XXX_CS3_STOP	(CONFIG_SYS_MBAR + 0x0020)
+#define MPC5XXX_CS4_START	(CONFIG_SYS_MBAR + 0x0024)
+#define MPC5XXX_CS4_STOP	(CONFIG_SYS_MBAR + 0x0028)
+#define MPC5XXX_CS5_START	(CONFIG_SYS_MBAR + 0x002c)
+#define MPC5XXX_CS5_STOP	(CONFIG_SYS_MBAR + 0x0030)
+#define MPC5XXX_BOOTCS_START	(CONFIG_SYS_MBAR + 0x004c)
+#define MPC5XXX_BOOTCS_STOP	(CONFIG_SYS_MBAR + 0x0050)
+#define MPC5XXX_ADDECR		(CONFIG_SYS_MBAR + 0x0054)
 
 #if defined(CONFIG_MGT5100)
-#define MPC5XXX_SDRAM_START	(CFG_MBAR + 0x0034)
-#define MPC5XXX_SDRAM_STOP	(CFG_MBAR + 0x0038)
-#define MPC5XXX_PCI1_START	(CFG_MBAR + 0x003c)
-#define MPC5XXX_PCI1_STOP	(CFG_MBAR + 0x0040)
-#define MPC5XXX_PCI2_START	(CFG_MBAR + 0x0044)
-#define MPC5XXX_PCI2_STOP	(CFG_MBAR + 0x0048)
+#define MPC5XXX_SDRAM_START	(CONFIG_SYS_MBAR + 0x0034)
+#define MPC5XXX_SDRAM_STOP	(CONFIG_SYS_MBAR + 0x0038)
+#define MPC5XXX_PCI1_START	(CONFIG_SYS_MBAR + 0x003c)
+#define MPC5XXX_PCI1_STOP	(CONFIG_SYS_MBAR + 0x0040)
+#define MPC5XXX_PCI2_START	(CONFIG_SYS_MBAR + 0x0044)
+#define MPC5XXX_PCI2_STOP	(CONFIG_SYS_MBAR + 0x0048)
 #elif defined(CONFIG_MPC5200)
-#define MPC5XXX_CS6_START	(CFG_MBAR + 0x0058)
-#define MPC5XXX_CS6_STOP	(CFG_MBAR + 0x005c)
-#define MPC5XXX_CS7_START	(CFG_MBAR + 0x0060)
-#define MPC5XXX_CS7_STOP	(CFG_MBAR + 0x0064)
-#define MPC5XXX_SDRAM_CS0CFG	(CFG_MBAR + 0x0034)
-#define MPC5XXX_SDRAM_CS1CFG	(CFG_MBAR + 0x0038)
+#define MPC5XXX_CS6_START	(CONFIG_SYS_MBAR + 0x0058)
+#define MPC5XXX_CS6_STOP	(CONFIG_SYS_MBAR + 0x005c)
+#define MPC5XXX_CS7_START	(CONFIG_SYS_MBAR + 0x0060)
+#define MPC5XXX_CS7_STOP	(CONFIG_SYS_MBAR + 0x0064)
+#define MPC5XXX_SDRAM_CS0CFG	(CONFIG_SYS_MBAR + 0x0034)
+#define MPC5XXX_SDRAM_CS1CFG	(CONFIG_SYS_MBAR + 0x0038)
 #endif
 
-#define MPC5XXX_SDRAM		(CFG_MBAR + 0x0100)
-#define MPC5XXX_CDM		(CFG_MBAR + 0x0200)
-#define MPC5XXX_LPB		(CFG_MBAR + 0x0300)
-#define MPC5XXX_ICTL		(CFG_MBAR + 0x0500)
-#define MPC5XXX_GPT		(CFG_MBAR + 0x0600)
-#define MPC5XXX_GPIO		(CFG_MBAR + 0x0b00)
-#define MPC5XXX_WU_GPIO         (CFG_MBAR + 0x0c00)
-#define MPC5XXX_PCI		(CFG_MBAR + 0x0d00)
-#define MPC5XXX_SPI		(CFG_MBAR + 0x0f00)
-#define MPC5XXX_USB		(CFG_MBAR + 0x1000)
-#define MPC5XXX_SDMA		(CFG_MBAR + 0x1200)
-#define MPC5XXX_XLBARB		(CFG_MBAR + 0x1f00)
+#define MPC5XXX_SDRAM		(CONFIG_SYS_MBAR + 0x0100)
+#define MPC5XXX_CDM		(CONFIG_SYS_MBAR + 0x0200)
+#define MPC5XXX_LPB		(CONFIG_SYS_MBAR + 0x0300)
+#define MPC5XXX_ICTL		(CONFIG_SYS_MBAR + 0x0500)
+#define MPC5XXX_GPT		(CONFIG_SYS_MBAR + 0x0600)
+#define MPC5XXX_GPIO		(CONFIG_SYS_MBAR + 0x0b00)
+#define MPC5XXX_WU_GPIO         (CONFIG_SYS_MBAR + 0x0c00)
+#define MPC5XXX_PCI		(CONFIG_SYS_MBAR + 0x0d00)
+#define MPC5XXX_SPI		(CONFIG_SYS_MBAR + 0x0f00)
+#define MPC5XXX_USB		(CONFIG_SYS_MBAR + 0x1000)
+#define MPC5XXX_SDMA		(CONFIG_SYS_MBAR + 0x1200)
+#define MPC5XXX_XLBARB		(CONFIG_SYS_MBAR + 0x1f00)
 
 #if defined(CONFIG_MGT5100)
-#define	MPC5XXX_PSC1		(CFG_MBAR + 0x2000)
-#define	MPC5XXX_PSC2		(CFG_MBAR + 0x2400)
-#define	MPC5XXX_PSC3		(CFG_MBAR + 0x2800)
+#define	MPC5XXX_PSC1		(CONFIG_SYS_MBAR + 0x2000)
+#define	MPC5XXX_PSC2		(CONFIG_SYS_MBAR + 0x2400)
+#define	MPC5XXX_PSC3		(CONFIG_SYS_MBAR + 0x2800)
 #elif defined(CONFIG_MPC5200)
-#define	MPC5XXX_PSC1		(CFG_MBAR + 0x2000)
-#define	MPC5XXX_PSC2		(CFG_MBAR + 0x2200)
-#define	MPC5XXX_PSC3		(CFG_MBAR + 0x2400)
-#define	MPC5XXX_PSC4		(CFG_MBAR + 0x2600)
-#define	MPC5XXX_PSC5		(CFG_MBAR + 0x2800)
-#define	MPC5XXX_PSC6		(CFG_MBAR + 0x2c00)
+#define	MPC5XXX_PSC1		(CONFIG_SYS_MBAR + 0x2000)
+#define	MPC5XXX_PSC2		(CONFIG_SYS_MBAR + 0x2200)
+#define	MPC5XXX_PSC3		(CONFIG_SYS_MBAR + 0x2400)
+#define	MPC5XXX_PSC4		(CONFIG_SYS_MBAR + 0x2600)
+#define	MPC5XXX_PSC5		(CONFIG_SYS_MBAR + 0x2800)
+#define	MPC5XXX_PSC6		(CONFIG_SYS_MBAR + 0x2c00)
 #endif
 
-#define	MPC5XXX_FEC		(CFG_MBAR + 0x3000)
-#define MPC5XXX_ATA             (CFG_MBAR + 0x3A00)
+#define	MPC5XXX_FEC		(CONFIG_SYS_MBAR + 0x3000)
+#define MPC5XXX_ATA             (CONFIG_SYS_MBAR + 0x3A00)
 
-#define MPC5XXX_I2C1		(CFG_MBAR + 0x3D00)
-#define MPC5XXX_I2C2		(CFG_MBAR + 0x3D40)
+#define MPC5XXX_I2C1		(CONFIG_SYS_MBAR + 0x3D00)
+#define MPC5XXX_I2C2		(CONFIG_SYS_MBAR + 0x3D40)
 
 #if defined(CONFIG_MGT5100)
-#define MPC5XXX_SRAM		(CFG_MBAR + 0x4000)
+#define MPC5XXX_SRAM		(CONFIG_SYS_MBAR + 0x4000)
 #define MPC5XXX_SRAM_SIZE	(8*1024)
 #elif defined(CONFIG_MPC5200)
-#define MPC5XXX_SRAM		(CFG_MBAR + 0x8000)
+#define MPC5XXX_SRAM		(CONFIG_SYS_MBAR + 0x8000)
 #define MPC5XXX_SRAM_SIZE	(16*1024)
 #endif
 
diff --git a/include/mpc8220.h b/include/mpc8220.h
index d3b1457f9..c4900a0f1 100644
--- a/include/mpc8220.h
+++ b/include/mpc8220.h
@@ -39,37 +39,37 @@
 
 /* Internal memory map */
 /* MPC8220 Internal Register MMAP */
-#define MMAP_MBAR	(CFG_MBAR + 0x00000000) /* chip selects		     */
-#define MMAP_MEMCTL	(CFG_MBAR + 0x00000100) /* sdram controller	     */
-#define MMAP_XLBARB	(CFG_MBAR + 0x00000200) /* xlb arbitration control   */
-#define MMAP_CDM	(CFG_MBAR + 0x00000300) /* clock distribution module */
-#define MMAP_VDOPLL	(CFG_MBAR + 0x00000400) /* video PLL		     */
-#define MMAP_FB		(CFG_MBAR + 0x00000500) /* flex bus controller	     */
-#define MMAP_PCFG	(CFG_MBAR + 0x00000600) /* port config		     */
-#define MMAP_ICTL	(CFG_MBAR + 0x00000700) /* interrupt controller	     */
-#define MMAP_GPTMR	(CFG_MBAR + 0x00000800) /* general purpose timers    */
-#define MMAP_SLTMR	(CFG_MBAR + 0x00000900) /* slice timers		     */
-#define MMAP_GPIO	(CFG_MBAR + 0x00000A00) /* gpio module		     */
-#define MMAP_XCPCI	(CFG_MBAR + 0x00000B00) /* pci controller	     */
-#define MMAP_PCIARB	(CFG_MBAR + 0x00000C00) /* pci arbiter		     */
-#define MMAP_EXTDMA1	(CFG_MBAR + 0x00000D00) /* external dma1	     */
-#define MMAP_EXTDMA2	(CFG_MBAR + 0x00000E00) /* external dma1	     */
-#define MMAP_USBH	(CFG_MBAR + 0x00001000) /* usb host		     */
-#define MMAP_CMTMR	(CFG_MBAR + 0x00007f00) /* comm timers		     */
-#define MMAP_DMA	(CFG_MBAR + 0x00008000) /* dma			     */
-#define MMAP_USBD	(CFG_MBAR + 0x00008200) /* usb device		     */
-#define MMAP_COMMPCI	(CFG_MBAR + 0x00008400) /* pci comm Bus regs	     */
-#define MMAP_1284	(CFG_MBAR + 0x00008500) /* 1284			     */
-#define MMAP_PEV	(CFG_MBAR + 0x00008600) /* print engine video	     */
-#define MMAP_PSC1	(CFG_MBAR + 0x00008800) /* psc1 block		     */
-#define MMAP_I2C	(CFG_MBAR + 0x00008f00) /* i2c controller	     */
-#define MMAP_FEC1	(CFG_MBAR + 0x00009000) /* fast ethernet 1	     */
-#define MMAP_FEC2	(CFG_MBAR + 0x00009800) /* fast ethernet 2	     */
-#define MMAP_JBIGRAM	(CFG_MBAR + 0x0000a000) /* jbig RAM		     */
-#define MMAP_JBIG	(CFG_MBAR + 0x0000c000) /* jbig			     */
-#define MMAP_PDLA	(CFG_MBAR + 0x00010000) /*			     */
-#define MMAP_SRAMCFG	(CFG_MBAR + 0x0001ff00) /* SRAM config		     */
-#define MMAP_SRAM	(CFG_MBAR + 0x00020000) /* SRAM			     */
+#define MMAP_MBAR	(CONFIG_SYS_MBAR + 0x00000000) /* chip selects		     */
+#define MMAP_MEMCTL	(CONFIG_SYS_MBAR + 0x00000100) /* sdram controller	     */
+#define MMAP_XLBARB	(CONFIG_SYS_MBAR + 0x00000200) /* xlb arbitration control   */
+#define MMAP_CDM	(CONFIG_SYS_MBAR + 0x00000300) /* clock distribution module */
+#define MMAP_VDOPLL	(CONFIG_SYS_MBAR + 0x00000400) /* video PLL		     */
+#define MMAP_FB		(CONFIG_SYS_MBAR + 0x00000500) /* flex bus controller	     */
+#define MMAP_PCFG	(CONFIG_SYS_MBAR + 0x00000600) /* port config		     */
+#define MMAP_ICTL	(CONFIG_SYS_MBAR + 0x00000700) /* interrupt controller	     */
+#define MMAP_GPTMR	(CONFIG_SYS_MBAR + 0x00000800) /* general purpose timers    */
+#define MMAP_SLTMR	(CONFIG_SYS_MBAR + 0x00000900) /* slice timers		     */
+#define MMAP_GPIO	(CONFIG_SYS_MBAR + 0x00000A00) /* gpio module		     */
+#define MMAP_XCPCI	(CONFIG_SYS_MBAR + 0x00000B00) /* pci controller	     */
+#define MMAP_PCIARB	(CONFIG_SYS_MBAR + 0x00000C00) /* pci arbiter		     */
+#define MMAP_EXTDMA1	(CONFIG_SYS_MBAR + 0x00000D00) /* external dma1	     */
+#define MMAP_EXTDMA2	(CONFIG_SYS_MBAR + 0x00000E00) /* external dma1	     */
+#define MMAP_USBH	(CONFIG_SYS_MBAR + 0x00001000) /* usb host		     */
+#define MMAP_CMTMR	(CONFIG_SYS_MBAR + 0x00007f00) /* comm timers		     */
+#define MMAP_DMA	(CONFIG_SYS_MBAR + 0x00008000) /* dma			     */
+#define MMAP_USBD	(CONFIG_SYS_MBAR + 0x00008200) /* usb device		     */
+#define MMAP_COMMPCI	(CONFIG_SYS_MBAR + 0x00008400) /* pci comm Bus regs	     */
+#define MMAP_1284	(CONFIG_SYS_MBAR + 0x00008500) /* 1284			     */
+#define MMAP_PEV	(CONFIG_SYS_MBAR + 0x00008600) /* print engine video	     */
+#define MMAP_PSC1	(CONFIG_SYS_MBAR + 0x00008800) /* psc1 block		     */
+#define MMAP_I2C	(CONFIG_SYS_MBAR + 0x00008f00) /* i2c controller	     */
+#define MMAP_FEC1	(CONFIG_SYS_MBAR + 0x00009000) /* fast ethernet 1	     */
+#define MMAP_FEC2	(CONFIG_SYS_MBAR + 0x00009800) /* fast ethernet 2	     */
+#define MMAP_JBIGRAM	(CONFIG_SYS_MBAR + 0x0000a000) /* jbig RAM		     */
+#define MMAP_JBIG	(CONFIG_SYS_MBAR + 0x0000c000) /* jbig			     */
+#define MMAP_PDLA	(CONFIG_SYS_MBAR + 0x00010000) /*			     */
+#define MMAP_SRAMCFG	(CONFIG_SYS_MBAR + 0x0001ff00) /* SRAM config		     */
+#define MMAP_SRAM	(CONFIG_SYS_MBAR + 0x00020000) /* SRAM			     */
 
 #define SRAM_SIZE	0x8000			/* 32 KB */
 
@@ -301,23 +301,23 @@
 /*
  * Port configuration
  */
-#define CFG_FEC1_PORT0_CONFIG	0x00000000
-#define CFG_FEC1_PORT1_CONFIG	0x00000000
-#define CFG_1284_PORT0_CONFIG  0x00000000
-#define CFG_1284_PORT1_CONFIG  0x00000000
-#define CFG_FEC2_PORT2_CONFIG	0x00000000
-#define CFG_PEV_PORT2_CONFIG   0x00000000
-#define CFG_GP0_PORT0_CONFIG   0x00000000
-#define CFG_GP1_PORT2_CONFIG   0xaaaaaac0
-#define CFG_PSC_PORT3_CONFIG   0x00020000
-#define CFG_CS1_PORT3_CONFIG   0x00000000
-#define CFG_CS2_PORT3_CONFIG	0x10000000
-#define CFG_CS3_PORT3_CONFIG	0x40000000
-#define CFG_CS4_PORT3_CONFIG	0x00000400
-#define CFG_CS5_PORT3_CONFIG	0x00000200
-#define CFG_PCI_PORT3_CONFIG   0x01400180
-#define CFG_I2C_PORT3_CONFIG   0x00000000
-#define CFG_GP2_PORT3_CONFIG   0x000200a0
+#define CONFIG_SYS_FEC1_PORT0_CONFIG	0x00000000
+#define CONFIG_SYS_FEC1_PORT1_CONFIG	0x00000000
+#define CONFIG_SYS_1284_PORT0_CONFIG  0x00000000
+#define CONFIG_SYS_1284_PORT1_CONFIG  0x00000000
+#define CONFIG_SYS_FEC2_PORT2_CONFIG	0x00000000
+#define CONFIG_SYS_PEV_PORT2_CONFIG   0x00000000
+#define CONFIG_SYS_GP0_PORT0_CONFIG   0x00000000
+#define CONFIG_SYS_GP1_PORT2_CONFIG   0xaaaaaac0
+#define CONFIG_SYS_PSC_PORT3_CONFIG   0x00020000
+#define CONFIG_SYS_CS1_PORT3_CONFIG   0x00000000
+#define CONFIG_SYS_CS2_PORT3_CONFIG	0x10000000
+#define CONFIG_SYS_CS3_PORT3_CONFIG	0x40000000
+#define CONFIG_SYS_CS4_PORT3_CONFIG	0x00000400
+#define CONFIG_SYS_CS5_PORT3_CONFIG	0x00000200
+#define CONFIG_SYS_PCI_PORT3_CONFIG   0x01400180
+#define CONFIG_SYS_I2C_PORT3_CONFIG   0x00000000
+#define CONFIG_SYS_GP2_PORT3_CONFIG   0x000200a0
 
 /* ------------------------------------------------------------------------ */
 /*
@@ -571,9 +571,9 @@ typedef struct mpc8220_xcpci {
 /* PCI->XLB space translation (MPC8220 target), reg0 can address max 256MB,
    reg1 - 1GB */
 #define PCI_BASE_ADDR_REG0			0x40000000
-#define PCI_BASE_ADDR_REG1			(CFG_SDRAM_BASE)
-#define PCI_TARGET_BASE_ADDR_REG0		(CFG_MBAR)
-#define PCI_TARGET_BASE_ADDR_REG1		(CFG_SDRAM_BASE)
+#define PCI_BASE_ADDR_REG1			(CONFIG_SYS_SDRAM_BASE)
+#define PCI_TARGET_BASE_ADDR_REG0		(CONFIG_SYS_MBAR)
+#define PCI_TARGET_BASE_ADDR_REG1		(CONFIG_SYS_SDRAM_BASE)
 #define PCI_TARGET_BASE_ADDR_EN			1<<0
 
 
diff --git a/include/mpc824x.h b/include/mpc824x.h
index 30f01d5aa..5aa9370b1 100644
--- a/include/mpc824x.h
+++ b/include/mpc824x.h
@@ -154,7 +154,7 @@
 #define MAP_B_CONFIG_DATA_LOW	0x0000	/* Lower half of CONFIG_DAT for Map B */
 
 
-#if defined(CFG_ADDR_MAP_A)
+#if defined(CONFIG_SYS_ADDR_MAP_A)
 #define CONFIG_ADDR_HIGH    MAP_A_CONFIG_ADDR_HIGH  /* Upper half of CONFIG_ADDR */
 #define CONFIG_ADDR_LOW	    MAP_A_CONFIG_ADDR_LOW   /* Lower half of CONFIG_ADDR */
 #define CONFIG_DATA_HIGH    MAP_A_CONFIG_DATA_HIGH  /* Upper half of CONFIG_DAT */
diff --git a/include/mpc83xx.h b/include/mpc83xx.h
index 5d82bb46f..43553f5ae 100644
--- a/include/mpc83xx.h
+++ b/include/mpc83xx.h
@@ -528,7 +528,7 @@
 #if defined(CONFIG_MPC834X)
 #define HRCWH_ROM_LOC_PCI2		0x00200000
 #endif
-#if defined(CONIFG_MPC837X)
+#if defined(CONFIG_MPC837X)
 #define HRCWH_ROM_LOC_ON_CHIP_ROM	0x00300000
 #endif
 #define HRCWH_ROM_LOC_LOCAL_8BIT	0x00500000
@@ -544,12 +544,14 @@
 #define HRCWH_RL_EXT_LEGACY		0x00000000
 #define HRCWH_RL_EXT_NAND		0x00040000
 
+#define HRCWH_TSEC1M_MASK		0x0000E000
 #define HRCWH_TSEC1M_IN_MII		0x00000000
 #define HRCWH_TSEC1M_IN_RMII		0x00002000
 #define HRCWH_TSEC1M_IN_RGMII		0x00006000
 #define HRCWH_TSEC1M_IN_RTBI		0x0000A000
 #define HRCWH_TSEC1M_IN_SGMII		0x0000C000
 
+#define HRCWH_TSEC2M_MASK		0x00001C00
 #define HRCWH_TSEC2M_IN_MII		0x00000000
 #define HRCWH_TSEC2M_IN_RMII		0x00000400
 #define HRCWH_TSEC2M_IN_RGMII		0x00000C00
@@ -885,7 +887,9 @@
 #define TIMING_CFG1_WRTORD_SHIFT	0
 #define TIMING_CFG1_CASLAT_20		0x00030000	/* CAS latency = 2.0 */
 #define TIMING_CFG1_CASLAT_25		0x00040000	/* CAS latency = 2.5 */
-#define TIMING_CFG1_CASLAT_30		0x00050000	/* CAS latency = 2.5 */
+#define TIMING_CFG1_CASLAT_30		0x00050000	/* CAS latency = 3.0 */
+#define TIMING_CFG1_CASLAT_35		0x00060000	/* CAS latency = 3.5 */
+#define TIMING_CFG1_CASLAT_40		0x00070000	/* CAS latency = 4.0 */
 
 /* TIMING_CFG_2 - DDR SDRAM Timing Configuration 2
  */
@@ -1145,91 +1149,6 @@
  */
 #define PMCCR1_POWER_OFF		0x00000020
 
-/* FMR - Flash Mode Register
- */
-#define FMR_CWTO		0x0000F000
-#define FMR_CWTO_SHIFT		12
-#define FMR_BOOT		0x00000800
-#define FMR_ECCM		0x00000100
-#define FMR_AL			0x00000030
-#define FMR_AL_SHIFT		4
-#define FMR_OP			0x00000003
-#define FMR_OP_SHIFT		0
-
-/* FIR - Flash Instruction Register
- */
-#define FIR_OP0			0xF0000000
-#define FIR_OP0_SHIFT		28
-#define FIR_OP1			0x0F000000
-#define FIR_OP1_SHIFT		24
-#define FIR_OP2			0x00F00000
-#define FIR_OP2_SHIFT		20
-#define FIR_OP3			0x000F0000
-#define FIR_OP3_SHIFT		16
-#define FIR_OP4			0x0000F000
-#define FIR_OP4_SHIFT		12
-#define FIR_OP5			0x00000F00
-#define FIR_OP5_SHIFT		8
-#define FIR_OP6			0x000000F0
-#define FIR_OP6_SHIFT		4
-#define FIR_OP7			0x0000000F
-#define FIR_OP7_SHIFT		0
-#define FIR_OP_NOP		0x0 /* No operation and end of sequence */
-#define FIR_OP_CA		0x1 /* Issue current column address */
-#define FIR_OP_PA		0x2 /* Issue current block+page address */
-#define FIR_OP_UA		0x3 /* Issue user defined address */
-#define FIR_OP_CM0		0x4 /* Issue command from FCR[CMD0] */
-#define FIR_OP_CM1		0x5 /* Issue command from FCR[CMD1] */
-#define FIR_OP_CM2		0x6 /* Issue command from FCR[CMD2] */
-#define FIR_OP_CM3		0x7 /* Issue command from FCR[CMD3] */
-#define FIR_OP_WB		0x8 /* Write FBCR bytes from FCM buffer */
-#define FIR_OP_WS		0x9 /* Write 1 or 2 bytes from MDR[AS] */
-#define FIR_OP_RB		0xA /* Read FBCR bytes to FCM buffer */
-#define FIR_OP_RS		0xB /* Read 1 or 2 bytes to MDR[AS] */
-#define FIR_OP_CW0		0xC /* Wait then issue FCR[CMD0] */
-#define FIR_OP_CW1		0xD /* Wait then issue FCR[CMD1] */
-#define FIR_OP_RBW		0xE /* Wait then read FBCR bytes */
-#define FIR_OP_RSW		0xF /* Wait then read 1 or 2 bytes */
-
-/* FCR - Flash Command Register
- */
-#define FCR_CMD0		0xFF000000
-#define FCR_CMD0_SHIFT		24
-#define FCR_CMD1		0x00FF0000
-#define FCR_CMD1_SHIFT		16
-#define FCR_CMD2		0x0000FF00
-#define FCR_CMD2_SHIFT		8
-#define FCR_CMD3		0x000000FF
-#define FCR_CMD3_SHIFT		0
-
-/* FBAR - Flash Block Address Register
- */
-#define FBAR_BLK		0x00FFFFFF
-
-/* FPAR - Flash Page Address Register
- */
-#define FPAR_SP_PI		0x00007C00
-#define FPAR_SP_PI_SHIFT	10
-#define FPAR_SP_MS		0x00000200
-#define FPAR_SP_CI		0x000001FF
-#define FPAR_SP_CI_SHIFT	0
-#define FPAR_LP_PI		0x0003F000
-#define FPAR_LP_PI_SHIFT	12
-#define FPAR_LP_MS		0x00000800
-#define FPAR_LP_CI		0x000007FF
-#define FPAR_LP_CI_SHIFT	0
-
-/* LTESR - Transfer Error Status Register
- */
-#define LTESR_BM		0x80000000
-#define LTESR_FCT		0x40000000
-#define LTESR_PAR		0x20000000
-#define LTESR_WP		0x04000000
-#define LTESR_ATMW		0x00800000
-#define LTESR_ATMR		0x00400000
-#define LTESR_CS		0x00080000
-#define LTESR_CC		0x00000001
-
 /* DDRCDR - DDR Control Driver Register
  */
 #define DDRCDR_DHC_EN		0x80000000
diff --git a/include/mpc86xx.h b/include/mpc86xx.h
index ce3d784da..f119d5bb1 100644
--- a/include/mpc86xx.h
+++ b/include/mpc86xx.h
@@ -16,9 +16,9 @@
  * platform register addresses
  */
 
-#define GUTS_SVR	(CFG_CCSRBAR + 0xE00A4)
-#define MCM_ABCR	(CFG_CCSRBAR + 0x01000)
-#define MCM_DBCR	(CFG_CCSRBAR + 0x01008)
+#define GUTS_SVR	(CONFIG_SYS_CCSRBAR + 0xE00A4)
+#define MCM_ABCR	(CONFIG_SYS_CCSRBAR + 0x01000)
+#define MCM_DBCR	(CONFIG_SYS_CCSRBAR + 0x01008)
 
 /*
  * l2cr values.  Look in config_<BOARD>.h for the actual setup
diff --git a/include/mpc8xx_irq.h b/include/mpc8xx_irq.h
index d2a81c00d..15cf693fa 100644
--- a/include/mpc8xx_irq.h
+++ b/include/mpc8xx_irq.h
@@ -45,8 +45,8 @@
  * MBX PCI/ISA/IDE interrupts.
  */
 
-#ifdef CFG_CPM_INTERRUPT
-# define CPM_INTERRUPT		CFG_CPM_INTERRUPT
+#ifdef CONFIG_SYS_CPM_INTERRUPT
+# define CPM_INTERRUPT		CONFIG_SYS_CPM_INTERRUPT
 #else
 # define CPM_INTERRUPT		SIU_LEVEL2
 #endif
diff --git a/include/linux/mtd/ubi-user.h b/include/mtd/ubi-user.h
index fe06ded0e..a7421f130 100644
--- a/include/linux/mtd/ubi-user.h
+++ b/include/mtd/ubi-user.h
@@ -22,6 +22,21 @@
 #define __UBI_USER_H__
 
 /*
+ * UBI device creation (the same as MTD device attachment)
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ *
+ * MTD devices may be attached using %UBI_IOCATT ioctl command of the UBI
+ * control device. The caller has to properly fill and pass
+ * &struct ubi_attach_req object - UBI will attach the MTD device specified in
+ * the request and return the newly created UBI device number as the ioctl
+ * return value.
+ *
+ * UBI device deletion (the same as MTD device detachment)
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ *
+ * An UBI device maybe deleted with %UBI_IOCDET ioctl command of the UBI
+ * control device.
+ *
  * UBI volume creation
  * ~~~~~~~~~~~~~~~~~~~
  *
@@ -48,7 +63,7 @@
  *
  * Volume update should be done via the %UBI_IOCVOLUP IOCTL command of the
  * corresponding UBI volume character device. A pointer to a 64-bit update
- * size should be passed to the IOCTL. After then, UBI expects user to write
+ * size should be passed to the IOCTL. After this, UBI expects user to write
  * this number of bytes to the volume character device. The update is finished
  * when the claimed number of bytes is passed. So, the volume update sequence
  * is something like:
@@ -57,14 +72,24 @@
  * ioctl(fd, UBI_IOCVOLUP, &image_size);
  * write(fd, buf, image_size);
  * close(fd);
+ *
+ * Atomic eraseblock change
+ * ~~~~~~~~~~~~~~~~~~~~~~~~
+ *
+ * Atomic eraseblock change operation is done via the %UBI_IOCEBCH IOCTL
+ * command of the corresponding UBI volume character device. A pointer to
+ * &struct ubi_leb_change_req has to be passed to the IOCTL. Then the user is
+ * expected to write the requested amount of bytes. This is similar to the
+ * "volume update" IOCTL.
  */
 
 /*
- * When a new volume is created, users may either specify the volume number they
- * want to create or to let UBI automatically assign a volume number using this
- * constant.
+ * When a new UBI volume or UBI device is created, users may either specify the
+ * volume/device number they want to create or to let UBI automatically assign
+ * the number using these constants.
  */
 #define UBI_VOL_NUM_AUTO (-1)
+#define UBI_DEV_NUM_AUTO (-1)
 
 /* Maximum volume name length */
 #define UBI_MAX_VOLUME_NAME 127
@@ -80,6 +105,15 @@
 /* Re-size an UBI volume */
 #define UBI_IOCRSVOL _IOW(UBI_IOC_MAGIC, 2, struct ubi_rsvol_req)
 
+/* IOCTL commands of the UBI control character device */
+
+#define UBI_CTRL_IOC_MAGIC 'o'
+
+/* Attach an MTD device */
+#define UBI_IOCATT _IOW(UBI_CTRL_IOC_MAGIC, 64, struct ubi_attach_req)
+/* Detach an MTD device */
+#define UBI_IOCDET _IOW(UBI_CTRL_IOC_MAGIC, 65, int32_t)
+
 /* IOCTL commands of UBI volume character devices */
 
 #define UBI_VOL_IOC_MAGIC 'O'
@@ -88,6 +122,28 @@
 #define UBI_IOCVOLUP _IOW(UBI_VOL_IOC_MAGIC, 0, int64_t)
 /* An eraseblock erasure command, used for debugging, disabled by default */
 #define UBI_IOCEBER _IOW(UBI_VOL_IOC_MAGIC, 1, int32_t)
+/* An atomic eraseblock change command */
+#define UBI_IOCEBCH _IOW(UBI_VOL_IOC_MAGIC, 2, int32_t)
+
+/* Maximum MTD device name length supported by UBI */
+#define MAX_UBI_MTD_NAME_LEN 127
+
+/*
+ * UBI data type hint constants.
+ *
+ * UBI_LONGTERM: long-term data
+ * UBI_SHORTTERM: short-term data
+ * UBI_UNKNOWN: data persistence is unknown
+ *
+ * These constants are used when data is written to UBI volumes in order to
+ * help the UBI wear-leveling unit to find more appropriate physical
+ * eraseblocks.
+ */
+enum {
+	UBI_LONGTERM  = 1,
+	UBI_SHORTTERM = 2,
+	UBI_UNKNOWN   = 3,
+};
 
 /*
  * UBI volume type constants.
@@ -97,22 +153,58 @@
  */
 enum {
 	UBI_DYNAMIC_VOLUME = 3,
-	UBI_STATIC_VOLUME = 4
+	UBI_STATIC_VOLUME  = 4,
+};
+
+/**
+ * struct ubi_attach_req - attach MTD device request.
+ * @ubi_num: UBI device number to create
+ * @mtd_num: MTD device number to attach
+ * @vid_hdr_offset: VID header offset (use defaults if %0)
+ * @padding: reserved for future, not used, has to be zeroed
+ *
+ * This data structure is used to specify MTD device UBI has to attach and the
+ * parameters it has to use. The number which should be assigned to the new UBI
+ * device is passed in @ubi_num. UBI may automatically assign the number if
+ * @UBI_DEV_NUM_AUTO is passed. In this case, the device number is returned in
+ * @ubi_num.
+ *
+ * Most applications should pass %0 in @vid_hdr_offset to make UBI use default
+ * offset of the VID header within physical eraseblocks. The default offset is
+ * the next min. I/O unit after the EC header. For example, it will be offset
+ * 512 in case of a 512 bytes page NAND flash with no sub-page support. Or
+ * it will be 512 in case of a 2KiB page NAND flash with 4 512-byte sub-pages.
+ *
+ * But in rare cases, if this optimizes things, the VID header may be placed to
+ * a different offset. For example, the boot-loader might do things faster if the
+ * VID header sits at the end of the first 2KiB NAND page with 4 sub-pages. As
+ * the boot-loader would not normally need to read EC headers (unless it needs
+ * UBI in RW mode), it might be faster to calculate ECC. This is weird example,
+ * but it real-life example. So, in this example, @vid_hdr_offer would be
+ * 2KiB-64 bytes = 1984. Note, that this position is not even 512-bytes
+ * aligned, which is OK, as UBI is clever enough to realize this is 4th sub-page
+ * of the first page and add needed padding.
+ */
+struct ubi_attach_req {
+	int32_t ubi_num;
+	int32_t mtd_num;
+	int32_t vid_hdr_offset;
+	uint8_t padding[12];
 };
 
 /**
  * struct ubi_mkvol_req - volume description data structure used in
- * volume creation requests.
+ *                        volume creation requests.
  * @vol_id: volume number
  * @alignment: volume alignment
  * @bytes: volume size in bytes
  * @vol_type: volume type (%UBI_DYNAMIC_VOLUME or %UBI_STATIC_VOLUME)
- * @padding1: reserved for future, not used
+ * @padding1: reserved for future, not used, has to be zeroed
  * @name_len: volume name length
- * @padding2: reserved for future, not used
+ * @padding2: reserved for future, not used, has to be zeroed
  * @name: volume name
  *
- * This structure is used by userspace programs when creating new volumes. The
+ * This structure is used by user-space programs when creating new volumes. The
  * @used_bytes field is only necessary when creating static volumes.
  *
  * The @alignment field specifies the required alignment of the volume logical
@@ -139,7 +231,7 @@ struct ubi_mkvol_req {
 	int8_t padding1;
 	int16_t name_len;
 	int8_t padding2[4];
-	char name[UBI_MAX_VOLUME_NAME+1];
+	char name[UBI_MAX_VOLUME_NAME + 1];
 } __attribute__ ((packed));
 
 /**
@@ -158,4 +250,19 @@ struct ubi_rsvol_req {
 	int32_t vol_id;
 } __attribute__ ((packed));
 
+/**
+ * struct ubi_leb_change_req - a data structure used in atomic logical
+ *                             eraseblock change requests.
+ * @lnum: logical eraseblock number to change
+ * @bytes: how many bytes will be written to the logical eraseblock
+ * @dtype: data type (%UBI_LONGTERM, %UBI_SHORTTERM, %UBI_UNKNOWN)
+ * @padding: reserved for future, not used, has to be zeroed
+ */
+struct ubi_leb_change_req {
+	int32_t lnum;
+	int32_t bytes;
+	uint8_t dtype;
+	uint8_t padding[7];
+} __attribute__ ((packed));
+
 #endif /* __UBI_USER_H__ */
diff --git a/include/nand.h b/include/nand.h
index 3296e109e..b4f316f71 100644
--- a/include/nand.h
+++ b/include/nand.h
@@ -122,7 +122,7 @@ int nand_lock( nand_info_t *meminfo, int tight );
 int nand_unlock( nand_info_t *meminfo, ulong start, ulong length );
 int nand_get_lock_status(nand_info_t *meminfo, ulong offset);
 
-#ifdef CFG_NAND_SELECT_DEVICE
+#ifdef CONFIG_SYS_NAND_SELECT_DEVICE
 void board_nand_select_device(struct nand_chip *nand, int chip);
 #endif
 
diff --git a/include/net.h b/include/net.h
index 79ddfa294..d2d394f0d 100644
--- a/include/net.h
+++ b/include/net.h
@@ -38,16 +38,16 @@
 #define CONFIG_NET_MULTI
 #if (CONFIG_ETHER_INDEX == 1)
 #define	CONFIG_ETHER_ON_FCC1
-# define CFG_CMXFCR_MASK1	CFG_CMXFCR_MASK
-# define CFG_CMXFCR_VALUE1	CFG_CMXFCR_VALUE
+# define CONFIG_SYS_CMXFCR_MASK1	CONFIG_SYS_CMXFCR_MASK
+# define CONFIG_SYS_CMXFCR_VALUE1	CONFIG_SYS_CMXFCR_VALUE
 #elif (CONFIG_ETHER_INDEX == 2)
 #define	CONFIG_ETHER_ON_FCC2
-# define CFG_CMXFCR_MASK2	CFG_CMXFCR_MASK
-# define CFG_CMXFCR_VALUE2	CFG_CMXFCR_VALUE
+# define CONFIG_SYS_CMXFCR_MASK2	CONFIG_SYS_CMXFCR_MASK
+# define CONFIG_SYS_CMXFCR_VALUE2	CONFIG_SYS_CMXFCR_VALUE
 #elif (CONFIG_ETHER_INDEX == 3)
 #define	CONFIG_ETHER_ON_FCC3
-# define CFG_CMXFCR_MASK3	CFG_CMXFCR_MASK
-# define CFG_CMXFCR_VALUE3	CFG_CMXFCR_VALUE
+# define CONFIG_SYS_CMXFCR_MASK3	CONFIG_SYS_CMXFCR_MASK
+# define CONFIG_SYS_CMXFCR_VALUE3	CONFIG_SYS_CMXFCR_VALUE
 #endif /* CONFIG_ETHER_INDEX */
 #endif /* CONFIG_ETHER_ON_FCC */
 #endif /* !CONFIG_NET_MULTI && CONFIG_8260 */
@@ -61,8 +61,8 @@
  *
  */
 
-#ifdef CFG_RX_ETH_BUFFER
-# define PKTBUFSRX	CFG_RX_ETH_BUFFER
+#ifdef CONFIG_SYS_RX_ETH_BUFFER
+# define PKTBUFSRX	CONFIG_SYS_RX_ETH_BUFFER
 #else
 # define PKTBUFSRX	4
 #endif
@@ -200,6 +200,12 @@ typedef struct {
 	ushort		udp_xsum;	/* Checksum			*/
 } IP_t;
 
+#define IP_OFFS		0x1fff /* ip offset *= 8 */
+#define IP_FLAGS	0xe000 /* first 3 bits */
+#define IP_FLAGS_RES	0x8000 /* reserved */
+#define IP_FLAGS_DFRAG	0x4000 /* don't fragments */
+#define IP_FLAGS_MFRAG	0x2000 /* more fragments */
+
 #define IP_HDR_SIZE_NO_UDP	(sizeof (IP_t) - 8)
 #define IP_HDR_SIZE		(sizeof (IP_t))
 
diff --git a/include/netdev.h b/include/netdev.h
new file mode 100644
index 000000000..751f0dab5
--- /dev/null
+++ b/include/netdev.h
@@ -0,0 +1,116 @@
+/*
+ * (C) Copyright 2008
+ * Benjamin Warren, biggerbadderben@gmail.com
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * netdev.h - definitions an prototypes for network devices
+ */
+
+#ifndef _NETDEV_H_
+#define _NETDEV_H_
+
+/*
+ * Board and CPU-specific initialization functions
+ * board_eth_init() has highest priority.  cpu_eth_init() only
+ * gets called if board_eth_init() isn't instantiated or fails.
+ * Return values:
+ *      0: success
+ *     -1: failure
+ */
+
+int board_eth_init(bd_t *bis);
+int cpu_eth_init(bd_t *bis);
+
+/* Driver initialization prototypes */
+int au1x00_enet_initialize(bd_t*);
+int bfin_EMAC_initialize(bd_t *bis);
+int dc21x4x_initialize(bd_t *bis);
+int e1000_initialize(bd_t *bis);
+int eepro100_initialize(bd_t *bis);
+int eth_3com_initialize (bd_t * bis);
+int fec_initialize (bd_t *bis);
+int greth_initialize(bd_t *bis);
+void gt6426x_eth_initialize(bd_t *bis);
+int inca_switch_initialize(bd_t *bis);
+int macb_eth_initialize(int id, void *regs, unsigned int phy_addr);
+int mcdmafec_initialize(bd_t *bis);
+int mcffec_initialize(bd_t *bis);
+int mpc512x_fec_initialize(bd_t *bis);
+int mpc5xxx_fec_initialize(bd_t *bis);
+int mpc8220_fec_initialize(bd_t *bis);
+int natsemi_initialize(bd_t *bis);
+int npe_initialize(bd_t *bis);
+int ns8382x_initialize(bd_t *bis);
+int pcnet_initialize(bd_t *bis);
+int plb2800_eth_initialize(bd_t *bis);
+int ppc_4xx_eth_initialize (bd_t *bis);
+int rtl8139_initialize(bd_t *bis);
+int rtl8169_initialize(bd_t *bis);
+int scc_initialize(bd_t *bis);
+int skge_initialize(bd_t *bis);
+int tsi108_eth_initialize(bd_t *bis);
+int uec_initialize(int index);
+int uli526x_initialize(bd_t *bis);
+
+/* Boards with PCI network controllers can call this from their board_eth_init()
+ * function to initialize whatever's on board.
+ * Return value is total # of devices found */
+
+static inline int pci_eth_init(bd_t *bis)
+{
+	int num = 0;
+
+#ifdef CONFIG_PCI
+
+#ifdef CONFIG_EEPRO100
+	num += eepro100_initialize(bis);
+#endif
+#ifdef CONFIG_TULIP
+	num += dc21x4x_initialize(bis);
+#endif
+#ifdef CONFIG_E1000
+	num += e1000_initialize(bis);
+#endif
+#ifdef CONFIG_PCNET
+	num += pcnet_initialize(bis);
+#endif
+#ifdef CONFIG_NATSEMI
+	num += natsemi_initialize(bis);
+#endif
+#ifdef CONFIG_NS8382X
+	num += ns8382x_initialize(bis);
+#endif
+#if defined(CONFIG_RTL8139)
+	num += rtl8139_initialize(bis);
+#endif
+#if defined(CONFIG_RTL8169)
+	num += rtl8169_initialize(bis);
+#endif
+#if defined(CONFIG_ULI526)
+	num += uli526x_initialize(bis);
+#endif
+
+#endif  /* CONFIG_PCI */
+	return num;
+}
+
+#endif /* _NETDEV_H_ */
diff --git a/include/ns16550.h b/include/ns16550.h
index 34888a102..e6ade61a2 100644
--- a/include/ns16550.h
+++ b/include/ns16550.h
@@ -2,7 +2,7 @@
  * NS16550 Serial Port
  * originally from linux source (arch/ppc/boot/ns16550.h)
  * modified slightly to
- * have addresses as offsets from CFG_ISA_BASE
+ * have addresses as offsets from CONFIG_SYS_ISA_BASE
  * added a few more definitions
  * added prototypes for ns16550.c
  * reduced no of com ports to 2
@@ -12,7 +12,7 @@
  * by Richard Danter (richard.danter@windriver.com), (C) 2005 Wind River Systems
  */
 
-#if (CFG_NS16550_REG_SIZE == 1)
+#if (CONFIG_SYS_NS16550_REG_SIZE == 1)
 struct NS16550 {
 	unsigned char rbr;		/* 0 */
 	unsigned char ier;		/* 1 */
@@ -35,7 +35,7 @@ struct NS16550 {
 	unsigned char ssr;		/* 11*/
 #endif
 } __attribute__ ((packed));
-#elif (CFG_NS16550_REG_SIZE == 2)
+#elif (CONFIG_SYS_NS16550_REG_SIZE == 2)
 struct NS16550 {
 	unsigned short rbr;		/* 0 */
 	unsigned short ier;		/* 1 */
@@ -46,7 +46,7 @@ struct NS16550 {
 	unsigned short msr;		/* 6 */
 	unsigned short scr;		/* 7 */
 } __attribute__ ((packed));
-#elif (CFG_NS16550_REG_SIZE == 4)
+#elif (CONFIG_SYS_NS16550_REG_SIZE == 4)
 struct NS16550 {
 	unsigned long rbr;		/* 0 r  */
 	unsigned long ier;		/* 1 rw */
@@ -57,7 +57,7 @@ struct NS16550 {
 	unsigned long msr;		/* 6 r  */
 	unsigned long scr;		/* 7 rw */
 }; /* No need to pack an already aligned struct */
-#elif (CFG_NS16550_REG_SIZE == -4)
+#elif (CONFIG_SYS_NS16550_REG_SIZE == -4)
 struct NS16550 {
 	unsigned char rbr;		/* 0 */
 	int pad1:24;
@@ -85,7 +85,7 @@ struct NS16550 {
 	int pad10:24;
 #endif
 } __attribute__ ((packed));
-#elif (CFG_NS16550_REG_SIZE == -8)
+#elif (CONFIG_SYS_NS16550_REG_SIZE == -8)
 struct NS16550 {
 	unsigned char rbr;		/* 0 */
 	unsigned char pad0[7];
diff --git a/include/ns87308.h b/include/ns87308.h
index feeb94070..6177bb4c2 100644
--- a/include/ns87308.h
+++ b/include/ns87308.h
@@ -74,15 +74,15 @@ struct GPIO
 #define IO_DATA_OFFSET_10  0x015D  /* PnP motherboard mode */
 #define IO_DATA_OFFSET_11  0x002F  /* PnP motherboard mode */
 
-#if defined(CFG_NS87308_BADDR_0x)
-#define IO_INDEX (CFG_ISA_IO + IO_INDEX_OFFSET_0x)
-#define IO_DATA  (CFG_ISA_IO + IO_DATA_OFFSET_0x)
-#elif defined(CFG_NS87308_BADDR_10)
-#define IO_INDEX (CFG_ISA_IO + IO_INDEX_OFFSET_10)
-#define IO_DATA  (CFG_ISA_IO + IO_DATA_OFFSET_10)
-#elif defined(CFG_NS87308_BADDR_11)
-#define IO_INDEX (CFG_ISA_IO + IO_INDEX_OFFSET_11)
-#define IO_DATA  (CFG_ISA_IO + IO_DATA_OFFSET_11)
+#if defined(CONFIG_SYS_NS87308_BADDR_0x)
+#define IO_INDEX (CONFIG_SYS_ISA_IO + IO_INDEX_OFFSET_0x)
+#define IO_DATA  (CONFIG_SYS_ISA_IO + IO_DATA_OFFSET_0x)
+#elif defined(CONFIG_SYS_NS87308_BADDR_10)
+#define IO_INDEX (CONFIG_SYS_ISA_IO + IO_INDEX_OFFSET_10)
+#define IO_DATA  (CONFIG_SYS_ISA_IO + IO_DATA_OFFSET_10)
+#elif defined(CONFIG_SYS_NS87308_BADDR_11)
+#define IO_INDEX (CONFIG_SYS_ISA_IO + IO_INDEX_OFFSET_11)
+#define IO_DATA  (CONFIG_SYS_ISA_IO + IO_DATA_OFFSET_11)
 #endif
 
 /* PnP register definitions */
@@ -132,16 +132,16 @@ struct GPIO
 #define LDEV_GPIO           0x07    /*General Purpose IO and chip select output signals*/
 #define LDEV_POWRMAN        0x08    /*Power Managment*/
 
-#define CFG_NS87308_KBC1	(1 << LDEV_KBC1)
-#define CFG_NS87308_KBC2	(1 << LDEV_KBC2)
-#define CFG_NS87308_MOUSE	(1 << LDEV_MOUSE)
-#define CFG_NS87308_RTC_APC	(1 << LDEV_RTC_APC)
-#define CFG_NS87308_FDC		(1 << LDEV_FDC)
-#define CFG_NS87308_PARP	(1 << LDEV_PARP)
-#define CFG_NS87308_UART2	(1 << LDEV_UART2)
-#define CFG_NS87308_UART1	(1 << LDEV_UART1)
-#define CFG_NS87308_GPIO	(1 << LDEV_GPIO)
-#define CFG_NS87308_POWRMAN	(1 << LDEV_POWRMAN)
+#define CONFIG_SYS_NS87308_KBC1	(1 << LDEV_KBC1)
+#define CONFIG_SYS_NS87308_KBC2	(1 << LDEV_KBC2)
+#define CONFIG_SYS_NS87308_MOUSE	(1 << LDEV_MOUSE)
+#define CONFIG_SYS_NS87308_RTC_APC	(1 << LDEV_RTC_APC)
+#define CONFIG_SYS_NS87308_FDC		(1 << LDEV_FDC)
+#define CONFIG_SYS_NS87308_PARP	(1 << LDEV_PARP)
+#define CONFIG_SYS_NS87308_UART2	(1 << LDEV_UART2)
+#define CONFIG_SYS_NS87308_UART1	(1 << LDEV_UART1)
+#define CONFIG_SYS_NS87308_GPIO	(1 << LDEV_GPIO)
+#define CONFIG_SYS_NS87308_POWRMAN	(1 << LDEV_POWRMAN)
 
 /*some functions and macro's for doing configuration */
 
@@ -164,9 +164,9 @@ static inline void pnp_set_device(unsigned char dev)
 
 static inline void write_pm_reg(unsigned short base, unsigned char index, unsigned char data)
 {
-    pci_writeb(index, CFG_ISA_IO + base);
+    pci_writeb(index, CONFIG_SYS_ISA_IO + base);
     eieio();
-    pci_writeb(data, CFG_ISA_IO + base + 1);
+    pci_writeb(data, CONFIG_SYS_ISA_IO + base + 1);
 }
 
 /*void write_pnp_config(unsigned char index, unsigned char data);
@@ -228,23 +228,23 @@ static inline void write_pgcs_config(unsigned char index, unsigned char data)
 /*
  * Default NS87308 configuration
  */
-#ifndef CFG_NS87308_KBC1_BASE
-#define CFG_NS87308_KBC1_BASE	0x0060
+#ifndef CONFIG_SYS_NS87308_KBC1_BASE
+#define CONFIG_SYS_NS87308_KBC1_BASE	0x0060
 #endif
-#ifndef CFG_NS87308_RTC_BASE
-#define CFG_NS87308_RTC_BASE	0x0070
+#ifndef CONFIG_SYS_NS87308_RTC_BASE
+#define CONFIG_SYS_NS87308_RTC_BASE	0x0070
 #endif
-#ifndef CFG_NS87308_FDC_BASE
-#define CFG_NS87308_FDC_BASE	0x03F0
+#ifndef CONFIG_SYS_NS87308_FDC_BASE
+#define CONFIG_SYS_NS87308_FDC_BASE	0x03F0
 #endif
-#ifndef CFG_NS87308_LPT_BASE
-#define CFG_NS87308_LPT_BASE	0x0278
+#ifndef CONFIG_SYS_NS87308_LPT_BASE
+#define CONFIG_SYS_NS87308_LPT_BASE	0x0278
 #endif
-#ifndef CFG_NS87308_UART1_BASE
-#define CFG_NS87308_UART1_BASE	0x03F8
+#ifndef CONFIG_SYS_NS87308_UART1_BASE
+#define CONFIG_SYS_NS87308_UART1_BASE	0x03F8
 #endif
-#ifndef CFG_NS87308_UART2_BASE
-#define CFG_NS87308_UART2_BASE	0x02F8
+#ifndef CONFIG_SYS_NS87308_UART2_BASE
+#define CONFIG_SYS_NS87308_UART2_BASE	0x02F8
 #endif
 
 #endif /*_NS87308_H_*/
diff --git a/include/onenand_uboot.h b/include/onenand_uboot.h
index 6605e4f21..e9602574b 100644
--- a/include/onenand_uboot.h
+++ b/include/onenand_uboot.h
@@ -15,6 +15,7 @@
 #define __UBOOT_ONENAND_H
 
 #include <linux/types.h>
+#include <linux/mtd/mtd.h>
 
 struct mtd_info;
 struct erase_info;
diff --git a/include/part.h b/include/part.h
index b22a637dd..980fd0435 100644
--- a/include/part.h
+++ b/include/part.h
@@ -69,6 +69,7 @@ typedef struct block_dev_desc {
 #define PART_TYPE_DOS		0x02
 #define PART_TYPE_ISO		0x03
 #define PART_TYPE_AMIGA		0x04
+#define PART_TYPE_EFI		0x05
 
 /*
  * Type string for U-Boot bootable partitions
@@ -135,4 +136,11 @@ void print_part_amiga (block_dev_desc_t *dev_desc);
 int   test_part_amiga (block_dev_desc_t *dev_desc);
 #endif
 
+#ifdef CONFIG_EFI_PARTITION
+/* disk/part_efi.c */
+int get_partition_info_efi (block_dev_desc_t * dev_desc, int part, disk_partition_t *info);
+void print_part_efi (block_dev_desc_t *dev_desc);
+int   test_part_efi (block_dev_desc_t *dev_desc);
+#endif
+
 #endif /* _PART_H */
diff --git a/include/pci.h b/include/pci.h
index 1c8e21688..eebe8a8a5 100644
--- a/include/pci.h
+++ b/include/pci.h
@@ -101,8 +101,8 @@
 #define  PCI_BASE_ADDRESS_MEM_TYPE_1M	0x02	/* Below 1M [obsolete] */
 #define  PCI_BASE_ADDRESS_MEM_TYPE_64	0x04	/* 64 bit address */
 #define  PCI_BASE_ADDRESS_MEM_PREFETCH	0x08	/* prefetchable? */
-#define  PCI_BASE_ADDRESS_MEM_MASK	(~0x0fUL)
-#define  PCI_BASE_ADDRESS_IO_MASK	(~0x03UL)
+#define  PCI_BASE_ADDRESS_MEM_MASK	(~0x0fULL)
+#define  PCI_BASE_ADDRESS_IO_MASK	(~0x03ULL)
 /* bit 1 is reserved if address_space = 1 */
 
 /* Header type 0 (normal devices) */
@@ -111,7 +111,7 @@
 #define PCI_SUBSYSTEM_ID	0x2e
 #define PCI_ROM_ADDRESS		0x30	/* Bits 31..11 are address, 10..1 reserved */
 #define  PCI_ROM_ADDRESS_ENABLE 0x01
-#define PCI_ROM_ADDRESS_MASK	(~0x7ffUL)
+#define PCI_ROM_ADDRESS_MASK	(~0x7ffULL)
 
 #define PCI_CAPABILITY_LIST	0x34	/* Offset of first capability list entry */
 
@@ -312,13 +312,21 @@
 
 #include <pci_ids.h>
 
+#ifdef CONFIG_SYS_PCI_64BIT
+typedef u64 pci_addr_t;
+typedef u64 pci_size_t;
+#else
+typedef u32 pci_addr_t;
+typedef u32 pci_size_t;
+#endif
+
 struct pci_region {
-	unsigned long bus_start;		/* Start on the bus */
-	phys_addr_t phys_start;			/* Start in physical address space */
-	unsigned long size;			/* Size */
-	unsigned long flags;			/* Resource flags */
+	pci_addr_t bus_start;	/* Start on the bus */
+	phys_addr_t phys_start;	/* Start in physical address space */
+	pci_size_t size;	/* Size */
+	unsigned long flags;	/* Resource flags */
 
-	unsigned long bus_lower;
+	pci_addr_t bus_lower;
 };
 
 #define PCI_REGION_MEM		0x00000000	/* PCI memory space */
@@ -330,9 +338,9 @@ struct pci_region {
 #define PCI_REGION_RO		0x00000200	/* Read-only memory */
 
 extern __inline__ void pci_set_region(struct pci_region *reg,
-				      unsigned long bus_start,
+				      pci_addr_t bus_start,
 				      phys_addr_t phys_start,
-				      unsigned long size,
+				      pci_size_t size,
 				      unsigned long flags) {
 	reg->bus_start	= bus_start;
 	reg->phys_start = phys_start;
@@ -433,9 +441,9 @@ extern __inline__ void pci_set_ops(struct pci_controller *hose,
 extern void pci_setup_indirect(struct pci_controller* hose, u32 cfg_addr, u32 cfg_data);
 
 extern phys_addr_t pci_hose_bus_to_phys(struct pci_controller* hose,
-					unsigned long addr, unsigned long flags);
-extern unsigned long pci_hose_phys_to_bus(struct pci_controller* hose,
-					  phys_addr_t addr, unsigned long flags);
+					pci_addr_t addr, unsigned long flags);
+extern pci_addr_t pci_hose_phys_to_bus(struct pci_controller* hose,
+					phys_addr_t addr, unsigned long flags);
 
 #define pci_phys_to_bus(dev, addr, flags) \
 	pci_hose_phys_to_bus(pci_bus_to_hose(PCI_BUS(dev)), (addr), (flags))
@@ -483,8 +491,8 @@ extern int pci_hose_scan(struct pci_controller *hose);
 extern int pci_hose_scan_bus(struct pci_controller *hose, int bus);
 
 extern void pciauto_region_init(struct pci_region* res);
-extern void pciauto_region_align(struct pci_region *res, unsigned long size);
-extern int pciauto_region_allocate(struct pci_region* res, unsigned int size, unsigned int *bar);
+extern void pciauto_region_align(struct pci_region *res, pci_size_t size);
+extern int pciauto_region_allocate(struct pci_region* res, pci_size_t size, pci_addr_t *bar);
 extern void pciauto_setup_device(struct pci_controller *hose,
 				 pci_dev_t dev, int bars_num,
 				 struct pci_region *mem,
@@ -500,7 +508,7 @@ extern pci_dev_t pci_find_class(int wanted_class, int wanted_sub_code,
 extern int pci_hose_config_device(struct pci_controller *hose,
 				  pci_dev_t dev,
 				  unsigned long io,
-				  unsigned long mem,
+				  pci_addr_t mem,
 				  unsigned long command);
 
 #ifdef CONFIG_MPC824X
diff --git a/include/pcmcia.h b/include/pcmcia.h
index 7305805e4..b60323d3c 100644
--- a/include/pcmcia.h
+++ b/include/pcmcia.h
@@ -138,8 +138,8 @@ typedef struct {
  *	Common Memory Space
  */
 
-#define CFG_PCMCIA_PBR0		0xFE100000
-#define CFG_PCMCIA_POR0	    (	PCMCIA_BSIZE_2	\
+#define CONFIG_SYS_PCMCIA_PBR0		0xFE100000
+#define CONFIG_SYS_PCMCIA_POR0	    (	PCMCIA_BSIZE_2	\
 			    |	PCMCIA_PPS_16	\
 			    |	PCMCIA_PRS_MEM	\
 			    |	PCMCIA_SLOT_x	\
@@ -153,8 +153,8 @@ typedef struct {
  *	Common Memory Space
  */
 
-#define CFG_PCMCIA_PBR1		0xFE100080
-#define CFG_PCMCIA_POR1	    (	PCMCIA_BSIZE_8	\
+#define CONFIG_SYS_PCMCIA_PBR1		0xFE100080
+#define CONFIG_SYS_PCMCIA_POR1	    (	PCMCIA_BSIZE_8	\
 			    |	PCMCIA_PPS_8	\
 			    |	PCMCIA_PRS_MEM	\
 			    |	PCMCIA_SLOT_x	\
@@ -168,8 +168,8 @@ typedef struct {
  *	Common Memory Space
  */
 
-#define CFG_PCMCIA_PBR2		0xFE100100
-#define CFG_PCMCIA_POR2	    (	PCMCIA_BSIZE_8	\
+#define CONFIG_SYS_PCMCIA_PBR2		0xFE100100
+#define CONFIG_SYS_PCMCIA_POR2	    (	PCMCIA_BSIZE_8	\
 			    |	PCMCIA_PPS_8	\
 			    |	PCMCIA_PRS_MEM	\
 			    |	PCMCIA_SLOT_x	\
@@ -179,8 +179,8 @@ typedef struct {
 /* Window 3:
  *	not used
  */
-#define CFG_PCMCIA_PBR3		0
-#define CFG_PCMCIA_POR3		0
+#define CONFIG_SYS_PCMCIA_PBR3		0
+#define CONFIG_SYS_PCMCIA_POR3		0
 
 /* Window 4:
  *	Base: 0xFE100C00	CS1
@@ -189,8 +189,8 @@ typedef struct {
  *	Common Memory Space
  */
 
-#define CFG_PCMCIA_PBR4		0xFE100C00
-#define CFG_PCMCIA_POR4	    (	PCMCIA_BSIZE_2	\
+#define CONFIG_SYS_PCMCIA_PBR4		0xFE100C00
+#define CONFIG_SYS_PCMCIA_POR4	    (	PCMCIA_BSIZE_2	\
 			    |	PCMCIA_PPS_16	\
 			    |	PCMCIA_PRS_MEM	\
 			    |	PCMCIA_SLOT_x	\
@@ -204,8 +204,8 @@ typedef struct {
  *	Common Memory Space
  */
 
-#define CFG_PCMCIA_PBR5		0xFE100C80
-#define CFG_PCMCIA_POR5	    (	PCMCIA_BSIZE_8	\
+#define CONFIG_SYS_PCMCIA_PBR5		0xFE100C80
+#define CONFIG_SYS_PCMCIA_POR5	    (	PCMCIA_BSIZE_8	\
 			    |	PCMCIA_PPS_8	\
 			    |	PCMCIA_PRS_MEM	\
 			    |	PCMCIA_SLOT_x	\
@@ -219,8 +219,8 @@ typedef struct {
  *	Common Memory Space
  */
 
-#define CFG_PCMCIA_PBR6		0xFE100D00
-#define CFG_PCMCIA_POR6	    (	PCMCIA_BSIZE_8	\
+#define CONFIG_SYS_PCMCIA_PBR6		0xFE100D00
+#define CONFIG_SYS_PCMCIA_POR6	    (	PCMCIA_BSIZE_8	\
 			    |	PCMCIA_PPS_8	\
 			    |	PCMCIA_PRS_MEM	\
 			    |	PCMCIA_SLOT_x	\
@@ -230,8 +230,8 @@ typedef struct {
 /* Window 7:
  *	not used
  */
-#define CFG_PCMCIA_PBR7		0
-#define CFG_PCMCIA_POR7		0
+#define CONFIG_SYS_PCMCIA_PBR7		0
+#define CONFIG_SYS_PCMCIA_POR7		0
 
 /**********************************************************************/
 
diff --git a/include/post.h b/include/post.h
index 123623f5c..97583b7e9 100644
--- a/include/post.h
+++ b/include/post.h
@@ -82,28 +82,28 @@ extern int post_hotkeys_pressed(void);
 
 #endif /* __ASSEMBLY__ */
 
-#define CFG_POST_RTC		0x00000001
-#define CFG_POST_WATCHDOG	0x00000002
-#define CFG_POST_MEMORY		0x00000004
-#define CFG_POST_CPU		0x00000008
-#define CFG_POST_I2C		0x00000010
-#define CFG_POST_CACHE		0x00000020
-#define CFG_POST_UART		0x00000040
-#define CFG_POST_ETHER		0x00000080
-#define CFG_POST_SPI		0x00000100
-#define CFG_POST_USB		0x00000200
-#define CFG_POST_SPR		0x00000400
-#define CFG_POST_SYSMON		0x00000800
-#define CFG_POST_DSP		0x00001000
-#define CFG_POST_OCM		0x00002000
-#define CFG_POST_FPU		0x00004000
-#define CFG_POST_ECC		0x00008000
-#define CFG_POST_BSPEC1		0x00010000
-#define CFG_POST_BSPEC2		0x00020000
-#define CFG_POST_BSPEC3		0x00040000
-#define CFG_POST_BSPEC4		0x00080000
-#define CFG_POST_BSPEC5		0x00100000
-#define CFG_POST_CODEC		0x00200000
+#define CONFIG_SYS_POST_RTC		0x00000001
+#define CONFIG_SYS_POST_WATCHDOG	0x00000002
+#define CONFIG_SYS_POST_MEMORY		0x00000004
+#define CONFIG_SYS_POST_CPU		0x00000008
+#define CONFIG_SYS_POST_I2C		0x00000010
+#define CONFIG_SYS_POST_CACHE		0x00000020
+#define CONFIG_SYS_POST_UART		0x00000040
+#define CONFIG_SYS_POST_ETHER		0x00000080
+#define CONFIG_SYS_POST_SPI		0x00000100
+#define CONFIG_SYS_POST_USB		0x00000200
+#define CONFIG_SYS_POST_SPR		0x00000400
+#define CONFIG_SYS_POST_SYSMON		0x00000800
+#define CONFIG_SYS_POST_DSP		0x00001000
+#define CONFIG_SYS_POST_OCM		0x00002000
+#define CONFIG_SYS_POST_FPU		0x00004000
+#define CONFIG_SYS_POST_ECC		0x00008000
+#define CONFIG_SYS_POST_BSPEC1		0x00010000
+#define CONFIG_SYS_POST_BSPEC2		0x00020000
+#define CONFIG_SYS_POST_BSPEC3		0x00040000
+#define CONFIG_SYS_POST_BSPEC4		0x00080000
+#define CONFIG_SYS_POST_BSPEC5		0x00100000
+#define CONFIG_SYS_POST_CODEC		0x00200000
 
 #endif /* CONFIG_POST */
 
diff --git a/include/ppc405.h b/include/ppc405.h
index f19b67f1b..917afecfa 100644
--- a/include/ppc405.h
+++ b/include/ppc405.h
@@ -27,9 +27,9 @@
 #define PPC_128MB_SACR_VALUE(addr)	PPC_REG_VAL(PPC_128MB_SACR_BIT(addr),1)
 
 #ifndef CONFIG_IOP480
-#define CFG_DCACHE_SIZE		(16 << 10)	/* For AMCC 405 CPUs	*/
+#define CONFIG_SYS_DCACHE_SIZE		(16 << 10)	/* For AMCC 405 CPUs	*/
 #else
-#define CFG_DCACHE_SIZE		(2 << 10)	/* For PLX IOP480 (403)	*/
+#define CONFIG_SYS_DCACHE_SIZE		(2 << 10)	/* For PLX IOP480 (403)	*/
 #endif
 
 /*--------------------------------------------------------------------- */
diff --git a/include/ppc440.h b/include/ppc440.h
index 3584fd24e..01f6eaf35 100644
--- a/include/ppc440.h
+++ b/include/ppc440.h
@@ -46,7 +46,7 @@
 #ifndef __PPC440_H__
 #define __PPC440_H__
 
-#define CFG_DCACHE_SIZE		(32 << 10)	/* For AMCC 440 CPUs	*/
+#define CONFIG_SYS_DCACHE_SIZE		(32 << 10)	/* For AMCC 440 CPUs	*/
 
 /*--------------------------------------------------------------------- */
 /* Special Purpose Registers						*/
@@ -169,18 +169,9 @@
 #define sdr_ecid1	0x0081
 #define sdr_ecid2	0x0082
 #define sdr_jtag	0x00c0
-#if !defined(CONFIG_440EPX) && !defined(CONFIG_440GRX)
-#define sdr_ddrdl	0x00e0
-#else
-#define sdr_cfg		0x00e0
-#define SDR_CFG_LT2_MASK          0x01000000 /* Leakage test 2*/
-#define SDR_CFG_64_32BITS_MASK    0x01000000 /* Switch DDR 64 bits or 32 bits */
-#define SDR_CFG_32BITS            0x00000000  /* 32 bits */
-#define SDR_CFG_64BITS            0x01000000  /* 64 bits */
-#define SDR_CFG_MC_V2518_MASK     0x02000000 /* Low VDD2518 (2.5 or 1.8V) */
-#define SDR_CFG_MC_V25            0x00000000  /* 2.5 V */
-#define SDR_CFG_MC_V18            0x02000000  /* 1.8 V */
-#endif /* !defined(CONFIG_440EPX) && !defined(CONFIG_440GRX) */
+#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
+#define SDR0_DDRCFG	0x00e0
+#endif /* defined(CONFIG_440EPX) || defined(CONFIG_440GRX) */
 #define sdr_ebc		0x0100
 #define sdr_uart0	0x0120	/* UART0 Config */
 #define sdr_uart1	0x0121	/* UART1 Config */
@@ -616,45 +607,6 @@
 
 #endif /* 440EP || 440GR || 440EPX || 440GRX */
 
-/*-----------------------------------------------------------------------------
- | L2 Cache
- +----------------------------------------------------------------------------*/
-#if defined (CONFIG_440GX) || \
-    defined(CONFIG_440SP) || defined(CONFIG_440SPE) || \
-    defined(CONFIG_460EX) || defined(CONFIG_460GT) || \
-    defined(CONFIG_460SX)
-#define L2_CACHE_BASE	0x030
-#define l2_cache_cfg	(L2_CACHE_BASE+0x00)	/* L2 Cache Config	*/
-#define l2_cache_cmd	(L2_CACHE_BASE+0x01)	/* L2 Cache Command	*/
-#define l2_cache_addr	(L2_CACHE_BASE+0x02)	/* L2 Cache Address	*/
-#define l2_cache_data	(L2_CACHE_BASE+0x03)	/* L2 Cache Data	*/
-#define l2_cache_stat	(L2_CACHE_BASE+0x04)	/* L2 Cache Status	*/
-#define l2_cache_cver	(L2_CACHE_BASE+0x05)	/* L2 Cache Revision ID */
-#define l2_cache_snp0	(L2_CACHE_BASE+0x06)	/* L2 Cache Snoop reg 0 */
-#define l2_cache_snp1	(L2_CACHE_BASE+0x07)	/* L2 Cache Snoop reg 1 */
-
-#endif /* CONFIG_440GX */
-
-/*-----------------------------------------------------------------------------
- | Internal SRAM
- +----------------------------------------------------------------------------*/
-#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
-#define ISRAM0_DCR_BASE 0x380
-#else
-#define ISRAM0_DCR_BASE 0x020
-#endif
-#define isram0_sb0cr	(ISRAM0_DCR_BASE+0x00)	/* SRAM bank config 0*/
-#define isram0_sb1cr	(ISRAM0_DCR_BASE+0x01)	/* SRAM bank config 1*/
-#define isram0_sb2cr	(ISRAM0_DCR_BASE+0x02)	/* SRAM bank config 2*/
-#define isram0_sb3cr	(ISRAM0_DCR_BASE+0x03)	/* SRAM bank config 3*/
-#define isram0_bear	(ISRAM0_DCR_BASE+0x04)	/* SRAM bus error addr reg */
-#define isram0_besr0	(ISRAM0_DCR_BASE+0x05)	/* SRAM bus error status reg 0 */
-#define isram0_besr1	(ISRAM0_DCR_BASE+0x06)	/* SRAM bus error status reg 1 */
-#define isram0_pmeg	(ISRAM0_DCR_BASE+0x07)	/* SRAM power management */
-#define isram0_cid	(ISRAM0_DCR_BASE+0x08)	/* SRAM bus core id reg */
-#define isram0_revid	(ISRAM0_DCR_BASE+0x09)	/* SRAM bus revision id reg */
-#define isram0_dpc	(ISRAM0_DCR_BASE+0x0a)	/* SRAM data parity check reg */
-
 #if defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
     defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
     defined(CONFIG_460EX) || defined(CONFIG_460GT)
@@ -1349,6 +1301,9 @@
 #define SDR0_ETH_CFG_ZMII_RMII_MODE_10M		0x10
 #define SDR0_ETH_CFG_ZMII_RMII_MODE_100M	0x11
 
+/* Ethernet Status Register */
+#define SDR0_ETH_STS		0x4104
+
 /* Miscealleneaous Function Reg. (SDR0_MFR) */
 #define SDR0_MFR		0x4300
 #define SDR0_MFR_T0TxFL		0x00800000	/* force parity error TAHOE0 Tx FIFO bits 0:63 */
@@ -1886,17 +1841,17 @@
 /*-----------------------------------------------------------------------------
 | PCI Internal Registers et. al. (accessed via plb)
 +----------------------------------------------------------------------------*/
-#define PCIX0_CFGADR		(CFG_PCI_BASE + 0x0ec00000)
-#define PCIX0_CFGDATA		(CFG_PCI_BASE + 0x0ec00004)
-#define PCIX0_CFGBASE		(CFG_PCI_BASE + 0x0ec80000)
-#define PCIX0_IOBASE		(CFG_PCI_BASE + 0x08000000)
+#define PCIX0_CFGADR		(CONFIG_SYS_PCI_BASE + 0x0ec00000)
+#define PCIX0_CFGDATA		(CONFIG_SYS_PCI_BASE + 0x0ec00004)
+#define PCIX0_CFGBASE		(CONFIG_SYS_PCI_BASE + 0x0ec80000)
+#define PCIX0_IOBASE		(CONFIG_SYS_PCI_BASE + 0x08000000)
 
 #if defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
     defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
 
 /* PCI Local Configuration Registers
    --------------------------------- */
-#define PCI_MMIO_LCR_BASE (CFG_PCI_BASE + 0x0f400000)    /* Real => 0x0EF400000 */
+#define PCI_MMIO_LCR_BASE (CONFIG_SYS_PCI_BASE + 0x0f400000)    /* Real => 0x0EF400000 */
 
 /* PCI Master Local Configuration Registers */
 #define PCIX0_PMM0LA         (PCI_MMIO_LCR_BASE + 0x00) /* PMM0 Local Address */
@@ -1981,7 +1936,7 @@
 #if defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
 
 /* USB2.0 Device */
-#define USB2D0_BASE         CFG_USB2D0_BASE
+#define USB2D0_BASE         CONFIG_SYS_USB2D0_BASE
 
 #define USB2D0_INTRIN       (USB2D0_BASE + 0x00000000)
 
@@ -2011,7 +1966,7 @@
 #if defined(CONFIG_440GP) || defined(CONFIG_440GX) || \
     defined(CONFIG_440SP) || defined(CONFIG_440SPE) || \
     defined(CONFIG_460SX)
-#define GPIO0_BASE             (CFG_PERIPHERAL_BASE+0x00000700)
+#define GPIO0_BASE             (CONFIG_SYS_PERIPHERAL_BASE+0x00000700)
 
 #define GPIO0_OR               (GPIO0_BASE+0x0)
 #define GPIO0_TCR              (GPIO0_BASE+0x4)
@@ -2022,8 +1977,8 @@
 #if defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
     defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
     defined(CONFIG_460EX) || defined(CONFIG_460GT)
-#define GPIO0_BASE             (CFG_PERIPHERAL_BASE+0x00000B00)
-#define GPIO1_BASE             (CFG_PERIPHERAL_BASE+0x00000C00)
+#define GPIO0_BASE             (CONFIG_SYS_PERIPHERAL_BASE+0x00000B00)
+#define GPIO1_BASE             (CONFIG_SYS_PERIPHERAL_BASE+0x00000C00)
 
 #define GPIO0_OR               (GPIO0_BASE+0x0)
 #define GPIO0_TCR              (GPIO0_BASE+0x4)
@@ -2064,19 +2019,6 @@
 
 #ifndef __ASSEMBLY__
 
-static inline u32 get_mcsr(void)
-{
-	u32 val;
-
-	asm volatile("mfspr %0, 0x23c" : "=r" (val) :);
-	return val;
-}
-
-static inline void set_mcsr(u32 val)
-{
-	asm volatile("mtspr 0x23c, %0" : "=r" (val) :);
-}
-
 #endif	/* _ASMLANGUAGE */
 
 #endif	/* __PPC440_H__ */
diff --git a/include/ppc4xx.h b/include/ppc4xx.h
index 59a3b06b7..f1478854d 100644
--- a/include/ppc4xx.h
+++ b/include/ppc4xx.h
@@ -107,8 +107,8 @@
  * Enable long long (%ll ...) printf format on 440 PPC's since most of
  * them support 36bit physical addressing
  */
-#define CFG_64BIT_VSPRINTF
-#define CFG_64BIT_STRTOUL
+#define CONFIG_SYS_64BIT_VSPRINTF
+#define CONFIG_SYS_64BIT_STRTOUL
 #include <ppc440.h>
 #else
 #include <ppc405.h>
@@ -143,7 +143,7 @@
 #define _START_OFFSET		(EXC_OFF_SYS_RESET + 0x2000)
 
 #define RESET_VECTOR	0xfffffffc
-#define CACHELINE_MASK	(CFG_CACHELINE_SIZE - 1) /* Address mask for cache
+#define CACHELINE_MASK	(CONFIG_SYS_CACHELINE_SIZE - 1) /* Address mask for cache
 						     line aligned data. */
 
 #define CPR0_DCR_BASE	0x0C
@@ -203,6 +203,22 @@ typedef struct
 	unsigned long pllPlbDiv;
 } PPC4xx_SYS_INFO;
 
+static inline u32 get_mcsr(void)
+{
+	u32 val;
+
+	asm volatile("mfspr %0, 0x23c" : "=r" (val) :);
+	return val;
+}
+
+static inline void set_mcsr(u32 val)
+{
+	asm volatile("mtspr 0x23c, %0" : "=r" (val) :);
+}
+
 #endif	/* __ASSEMBLY__ */
 
+/* for multi-cpu support */
+#define NA_OR_UNKNOWN_CPU	-1
+
 #endif	/* __PPC4XX_H__ */
diff --git a/include/ppc4xx_enet.h b/include/ppc4xx_enet.h
index b74c6fcaf..3e10883f9 100644
--- a/include/ppc4xx_enet.h
+++ b/include/ppc4xx_enet.h
@@ -171,9 +171,9 @@ typedef struct emac_4xx_hw_st {
 #if defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
     defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
     defined(CONFIG_460EX) || defined(CONFIG_460GT)
-#define ZMII_BASE		(CFG_PERIPHERAL_BASE + 0x0D00)
+#define ZMII_BASE		(CONFIG_SYS_PERIPHERAL_BASE + 0x0D00)
 #else
-#define ZMII_BASE		(CFG_PERIPHERAL_BASE + 0x0780)
+#define ZMII_BASE		(CONFIG_SYS_PERIPHERAL_BASE + 0x0780)
 #endif
 #define ZMII_FER		(ZMII_BASE)
 #define ZMII_SSR		(ZMII_BASE + 4)
@@ -216,13 +216,13 @@ typedef struct emac_4xx_hw_st {
 
 /* RGMII Register Addresses */
 #if defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
-#define RGMII_BASE		(CFG_PERIPHERAL_BASE + 0x1000)
+#define RGMII_BASE		(CONFIG_SYS_PERIPHERAL_BASE + 0x1000)
 #elif defined(CONFIG_460EX) || defined(CONFIG_460GT)
-#define RGMII_BASE		(CFG_PERIPHERAL_BASE + 0x1500)
+#define RGMII_BASE		(CONFIG_SYS_PERIPHERAL_BASE + 0x1500)
 #elif defined(CONFIG_405EX)
-#define RGMII_BASE		(CFG_PERIPHERAL_BASE + 0xB00)
+#define RGMII_BASE		(CONFIG_SYS_PERIPHERAL_BASE + 0xB00)
 #else
-#define RGMII_BASE		(CFG_PERIPHERAL_BASE + 0x0790)
+#define RGMII_BASE		(CONFIG_SYS_PERIPHERAL_BASE + 0x0790)
 #endif
 #define RGMII_FER		(RGMII_BASE + 0x00)
 #define RGMII_SSR		(RGMII_BASE + 0x04)
@@ -260,7 +260,7 @@ typedef struct emac_4xx_hw_st {
 |  TCP/IP Acceleration Hardware (TAH) 440GX Only
 +---------------------------------------------------------------------------*/
 #if defined(CONFIG_440GX)
-#define TAH_BASE		(CFG_PERIPHERAL_BASE + 0x0B50)
+#define TAH_BASE		(CONFIG_SYS_PERIPHERAL_BASE + 0x0B50)
 #define TAH_REVID		(TAH_BASE + 0x0)    /* Revision ID (RO)*/
 #define TAH_MR			(TAH_BASE + 0x10)   /* Mode Register (R/W) */
 #define TAH_SSR0		(TAH_BASE + 0x14)   /* Segment Size Reg 0 (R/W) */
@@ -326,9 +326,9 @@ typedef struct emac_4xx_hw_st {
 #if defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
     defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
     defined(CONFIG_460EX) || defined(CONFIG_460GT)
-#define EMAC_BASE		(CFG_PERIPHERAL_BASE + 0x0E00)
+#define EMAC_BASE		(CONFIG_SYS_PERIPHERAL_BASE + 0x0E00)
 #else
-#define EMAC_BASE		(CFG_PERIPHERAL_BASE + 0x0800)
+#define EMAC_BASE		(CONFIG_SYS_PERIPHERAL_BASE + 0x0800)
 #endif
 #else
 #if defined(CONFIG_405EZ) || defined(CONFIG_405EX)
@@ -376,6 +376,7 @@ typedef struct emac_4xx_hw_st {
 #define EMAC_M1_APP		(0x08000000)
 #define EMAC_M1_RSVD		(0x06000000)
 #define EMAC_M1_IST		(0x01000000)
+#define EMAC_M1_MF_1000GPCS	(0x00C00000)
 #define EMAC_M1_MF_1000MBPS	(0x00800000)	/* 0's for 10MBPS */
 #define EMAC_M1_MF_100MBPS	(0x00400000)
 #define EMAC_M1_RFS_MASK	(0x00380000)
@@ -394,6 +395,8 @@ typedef struct emac_4xx_hw_st {
 #define EMAC_M1_MWSW		(0x00007000)
 #define EMAC_M1_JUMBO_ENABLE	(0x00000800)
 #define EMAC_M1_IPPA		(0x000007c0)
+#define EMAC_M1_IPPA_SET(id)	(((id) & 0x1f) << 6)
+#define EMAC_M1_IPPA_GET(id)	(((id) >> 6) & 0x1f)
 #define EMAC_M1_OBCI_GT100	(0x00000020)
 #define EMAC_M1_OBCI_100	(0x00000018)
 #define EMAC_M1_OBCI_83		(0x00000010)
diff --git a/include/ps2mult.h b/include/ps2mult.h
index e68581751..599cb6dc4 100644
--- a/include/ps2mult.h
+++ b/include/ps2mult.h
@@ -22,7 +22,7 @@
 #define	PS2BUF_SIZE			512	/* power of 2, please */
 
 #ifndef CONFIG_PS2MULT_DELAY
-#define CONFIG_PS2MULT_DELAY	(CFG_HZ/2)	/* Initial delay	*/
+#define CONFIG_PS2MULT_DELAY	(CONFIG_SYS_HZ/2)	/* Initial delay	*/
 #endif
 
   /* PS/2 controller interface (include/asm/keyboard.h)
diff --git a/include/radeon.h b/include/radeon.h
index 35875f177..da6c26bbe 100644
--- a/include/radeon.h
+++ b/include/radeon.h
@@ -513,11 +513,11 @@
 #define PLL_WR_EN			0x00000080
 
 /* CONFIG_CNTL bit constants */
-#define CFG_VGA_RAM_EN			0x00000100
-#define CFG_ATI_REV_ID_MASK		(0xf << 16)
-#define CFG_ATI_REV_A11			(0 << 16)
-#define CFG_ATI_REV_A12			(1 << 16)
-#define CFG_ATI_REV_A13			(2 << 16)
+#define CONFIG_SYS_VGA_RAM_EN			0x00000100
+#define CONFIG_SYS_ATI_REV_ID_MASK		(0xf << 16)
+#define CONFIG_SYS_ATI_REV_A11			(0 << 16)
+#define CONFIG_SYS_ATI_REV_A12			(1 << 16)
+#define CONFIG_SYS_ATI_REV_A13			(2 << 16)
 
 /* CRTC_EXT_CNTL bit constants */
 #define VGA_ATI_LINEAR			0x00000008
diff --git a/include/rtc.h b/include/rtc.h
index df2d35fe4..785fbe380 100644
--- a/include/rtc.h
+++ b/include/rtc.h
@@ -53,7 +53,7 @@ struct rtc_time {
 };
 
 int rtc_get (struct rtc_time *);
-void rtc_set (struct rtc_time *);
+int rtc_set (struct rtc_time *);
 void rtc_reset (void);
 
 void GregorianDay (struct rtc_time *);
diff --git a/include/serial.h b/include/serial.h
index 2b99e539c..e3d8b3679 100644
--- a/include/serial.h
+++ b/include/serial.h
@@ -27,12 +27,12 @@ extern struct serial_device * default_serial_console (void);
     defined(CONFIG_MPC5xxx)
 extern struct serial_device serial0_device;
 extern struct serial_device serial1_device;
-#if defined(CFG_NS16550_SERIAL)
+#if defined(CONFIG_SYS_NS16550_SERIAL)
 extern struct serial_device eserial1_device;
 extern struct serial_device eserial2_device;
 extern struct serial_device eserial3_device;
 extern struct serial_device eserial4_device;
-#endif /* CFG_NS16550_SERIAL */
+#endif /* CONFIG_SYS_NS16550_SERIAL */
 
 #endif
 
diff --git a/include/spartan3.h b/include/spartan3.h
index 9a3a5d49b..b0fa1cdae 100644
--- a/include/spartan3.h
+++ b/include/spartan3.h
@@ -81,9 +81,6 @@ typedef struct {
 #define	XILINX_XC3S1200E_SIZE	3841184/8
 #define	XILINX_XC3S1600E_SIZE	5969696/8
 
-/* Spartan-IIIE (1.2V) */
-#define XILINX_XC3S1200E_SIZE	3841184/8
-
 /* Descriptor Macros
  *********************************************************************/
 /* Spartan-III devices */
@@ -103,14 +100,13 @@ typedef struct {
 { Xilinx_Spartan3, iface, XILINX_XC3S1500_SIZE, fn_table, cookie }
 
 #define XILINX_XC3S2000_DESC(iface, fn_table, cookie) \
-{ Xilinx_Spartan3, iface, XILINX_XC3S2000E_SIZE, fn_table, cookie }
+{ Xilinx_Spartan3, iface, XILINX_XC3S2000_SIZE, fn_table, cookie }
 
 #define XILINX_XC3S4000_DESC(iface, fn_table, cookie) \
-{ Xilinx_Spartan3, iface, XILINX_XC3S4000E_SIZE, fn_table, cookie }
+{ Xilinx_Spartan3, iface, XILINX_XC3S4000_SIZE, fn_table, cookie }
 
 #define XILINX_XC3S5000_DESC(iface, fn_table, cookie) \
-{ Xilinx_Spartan3, iface, XILINX_XC3S5000E_SIZE, fn_table, cookie }
-
+{ Xilinx_Spartan3, iface, XILINX_XC3S5000_SIZE, fn_table, cookie }
 
 /* Spartan-3E devices */
 #define XILINX_XC3S100E_DESC(iface, fn_table, cookie) \
@@ -128,9 +124,4 @@ typedef struct {
 #define XILINX_XC3S1600E_DESC(iface, fn_table, cookie) \
 { Xilinx_Spartan3, iface, XILINX_XC3S1600E_SIZE, fn_table, cookie }
 
-
-/* Spartan-IIIE devices */
-#define XILINX_XC3S1200E_DESC(iface, fn_table, cookie) \
-{ Xilinx_Spartan3, iface, XILINX_XC3S1200E_SIZE, fn_table, cookie }
-
 #endif /* _SPARTAN3_H_ */
diff --git a/include/status_led.h b/include/status_led.h
index d12bb67c2..79be69885 100644
--- a/include/status_led.h
+++ b/include/status_led.h
@@ -50,7 +50,7 @@ void status_led_set  (int led, int state);
 # define STATUS_LED_DAT		im_cpm.cp_pbdat
 
 # define STATUS_LED_BIT		0x00000001
-# define STATUS_LED_PERIOD	(CFG_HZ / 2)
+# define STATUS_LED_PERIOD	(CONFIG_SYS_HZ / 2)
 # define STATUS_LED_STATE	STATUS_LED_BLINKING
 
 # define STATUS_LED_ACTIVE	1		/* LED on for bit == 1	*/
@@ -65,7 +65,7 @@ void status_led_set  (int led, int state);
 # define STATUS_LED_DAT		im_ioport.iop_pddat
 
 # define STATUS_LED_BIT		0x00000001
-# define STATUS_LED_PERIOD	(CFG_HZ / 2)
+# define STATUS_LED_PERIOD	(CONFIG_SYS_HZ / 2)
 # define STATUS_LED_STATE	STATUS_LED_BLINKING
 
 # define STATUS_LED_ACTIVE	1		/* LED on for bit == 1	*/
@@ -81,7 +81,7 @@ void status_led_set  (int led, int state);
 # define STATUS_LED_DAT		im_ioport.iop_pddat
 
 # define STATUS_LED_BIT		0x00000001
-# define STATUS_LED_PERIOD	(CFG_HZ / 2)
+# define STATUS_LED_PERIOD	(CONFIG_SYS_HZ / 2)
 # define STATUS_LED_STATE	STATUS_LED_BLINKING
 
 # define STATUS_LED_ACTIVE	0		/* LED on for bit == 0	*/
@@ -97,16 +97,16 @@ void status_led_set  (int led, int state);
 # define STATUS_LED_DAT			im_ioport.iop_padat
 
 # define STATUS_LED_BIT			0x0800	/* Red LED 0 is on PA.4	*/
-# define STATUS_LED_PERIOD		(CFG_HZ / 4)
+# define STATUS_LED_PERIOD		(CONFIG_SYS_HZ / 4)
 # define STATUS_LED_STATE		STATUS_LED_OFF
 # define STATUS_LED_BIT1		0x0400	/* Grn LED 1 is on PA.5	*/
-# define STATUS_LED_PERIOD1		(CFG_HZ / 8)
+# define STATUS_LED_PERIOD1		(CONFIG_SYS_HZ / 8)
 # define STATUS_LED_STATE1		STATUS_LED_BLINKING
 # define STATUS_LED_BIT2		0x0080	/* Red LED 2 is on PA.8	*/
-# define STATUS_LED_PERIOD2		(CFG_HZ / 4)
+# define STATUS_LED_PERIOD2		(CONFIG_SYS_HZ / 4)
 # define STATUS_LED_STATE2		STATUS_LED_OFF
 # define STATUS_LED_BIT3		0x0040	/* Grn LED 3 is on PA.9	*/
-# define STATUS_LED_PERIOD3		(CFG_HZ / 4)
+# define STATUS_LED_PERIOD3		(CONFIG_SYS_HZ / 4)
 # define STATUS_LED_STATE3		STATUS_LED_OFF
 
 # define STATUS_LED_ACTIVE		1	/* LED on for bit == 1	*/
@@ -121,21 +121,21 @@ void status_led_set  (int led, int state);
 # define STATUS_LED_DAT		im_cpm.cp_pbdat
 
 # define STATUS_LED_BIT		0x00000010	/* LED 0 is on PB.27	*/
-# define STATUS_LED_PERIOD	(1 * CFG_HZ)
+# define STATUS_LED_PERIOD	(1 * CONFIG_SYS_HZ)
 # define STATUS_LED_STATE	STATUS_LED_OFF
 # define STATUS_LED_BIT1	0x00000020	/* LED 1 is on PB.26	*/
-# define STATUS_LED_PERIOD1	(1 * CFG_HZ)
+# define STATUS_LED_PERIOD1	(1 * CONFIG_SYS_HZ)
 # define STATUS_LED_STATE1	STATUS_LED_OFF
 /* IDE LED usable for other purposes, too */
 # define STATUS_LED_BIT2	0x00000008	/* LED 2 is on PB.28	*/
-# define STATUS_LED_PERIOD2	(1 * CFG_HZ)
+# define STATUS_LED_PERIOD2	(1 * CONFIG_SYS_HZ)
 # define STATUS_LED_STATE2	STATUS_LED_OFF
 
 # define STATUS_LED_ACTIVE	1		/* LED on for bit == 1	*/
 
 # define STATUS_ILOCK_SWITCH	0x00800000	/* ILOCK switch in IRQ4	*/
 
-# define STATUS_ILOCK_PERIOD	(CFG_HZ / 10)	/* about every 100 ms	*/
+# define STATUS_ILOCK_PERIOD	(CONFIG_SYS_HZ / 10)	/* about every 100 ms	*/
 
 # define STATUS_LED_YELLOW	0
 # define STATUS_LED_GREEN	1
@@ -150,21 +150,21 @@ void status_led_set  (int led, int state);
 # define STATUS_LED_DAT		im_cpm.cp_pbdat
 
 # define STATUS_LED_BIT		0x00000010	/* LED 0 is on PB.27	*/
-# define STATUS_LED_PERIOD	(1 * CFG_HZ)
+# define STATUS_LED_PERIOD	(1 * CONFIG_SYS_HZ)
 # define STATUS_LED_STATE	STATUS_LED_OFF
 # define STATUS_LED_BIT1	0x00000020	/* LED 1 is on PB.26	*/
-# define STATUS_LED_PERIOD1	(1 * CFG_HZ)
+# define STATUS_LED_PERIOD1	(1 * CONFIG_SYS_HZ)
 # define STATUS_LED_STATE1	STATUS_LED_OFF
 /* IDE LED usable for other purposes, too */
 # define STATUS_LED_BIT2	0x00000008	/* LED 2 is on PB.28	*/
-# define STATUS_LED_PERIOD2	(1 * CFG_HZ)
+# define STATUS_LED_PERIOD2	(1 * CONFIG_SYS_HZ)
 # define STATUS_LED_STATE2	STATUS_LED_OFF
 
 # define STATUS_LED_ACTIVE	1		/* LED on for bit == 1	*/
 
 # define STATUS_ILOCK_SWITCH	0x00004000	/* ILOCK is on PB.17	*/
 
-# define STATUS_ILOCK_PERIOD	(CFG_HZ / 10)	/* about every 100 ms	*/
+# define STATUS_ILOCK_PERIOD	(CONFIG_SYS_HZ / 10)	/* about every 100 ms	*/
 
 # define STATUS_LED_YELLOW	0
 # define STATUS_LED_GREEN	1
@@ -183,7 +183,7 @@ void status_led_set  (int led, int state);
 # else
 #  define STATUS_LED_BIT	0x0800
 # endif
-# define STATUS_LED_PERIOD	(CFG_HZ / 2)
+# define STATUS_LED_PERIOD	(CONFIG_SYS_HZ / 2)
 # define STATUS_LED_STATE	STATUS_LED_BLINKING
 
 # define STATUS_LED_ACTIVE	0		/* LED on for bit == 0 */
@@ -199,7 +199,7 @@ void status_led_set  (int led, int state);
 # define STATUS_LED_DAT		im_cpm.cp_pbdat
 
 # define STATUS_LED_BIT		0x00010000	/* green LED is on PB.15 */
-# define STATUS_LED_PERIOD	(CFG_HZ / 2)
+# define STATUS_LED_PERIOD	(CONFIG_SYS_HZ / 2)
 # define STATUS_LED_STATE	STATUS_LED_BLINKING
 
 # define STATUS_LED_ACTIVE	1		/* LED on for bit == 1 */
@@ -215,10 +215,10 @@ void status_led_set  (int led, int state);
 # define STATUS_LED_DAT		im_ioport.iop_padat
 
 # define STATUS_LED_BIT		0x4000		/* LED 0 is on PA.1 */
-# define STATUS_LED_PERIOD	(CFG_HZ / 2)
+# define STATUS_LED_PERIOD	(CONFIG_SYS_HZ / 2)
 # define STATUS_LED_STATE	STATUS_LED_BLINKING
 # define STATUS_LED_BIT1	0x1000		/* LED 1 is on PA.3 */
-# define STATUS_LED_PERIOD1	(CFG_HZ)
+# define STATUS_LED_PERIOD1	(CONFIG_SYS_HZ)
 # define STATUS_LED_STATE1	STATUS_LED_OFF
 
 # define STATUS_LED_ACTIVE	1		/* LED on for bit == 1	*/
@@ -244,11 +244,11 @@ void status_led_set  (int led, int state);
 #define STATUS_LED_DAT		im_ioport.iop_pddat
 
 # define STATUS_LED_BIT		0x0080			/* PD.8 */
-# define STATUS_LED_PERIOD	(CFG_HZ / 2)
+# define STATUS_LED_PERIOD	(CONFIG_SYS_HZ / 2)
 # define STATUS_LED_STATE	STATUS_LED_BLINKING
 
 # define STATUS_LED_BIT1	0x0040			/* PD.9 */
-# define STATUS_LED_PERIOD1	(CFG_HZ / 2)
+# define STATUS_LED_PERIOD1	(CONFIG_SYS_HZ / 2)
 # define STATUS_LED_STATE1	STATUS_LED_OFF
 
 # define STATUS_LED_ACTIVE	0		/* LED on for bit == 0	*/
@@ -263,7 +263,7 @@ void status_led_set  (int led, int state);
 
 # define STATUS_LED_BIT		0x2000		/* Select one of the 16 possible*/
 						/* MIOS outputs */
-# define STATUS_LED_PERIOD	(CFG_HZ / 2)	/* Blinking periode is 500 ms */
+# define STATUS_LED_PERIOD	(CONFIG_SYS_HZ / 2)	/* Blinking periode is 500 ms */
 # define STATUS_LED_STATE	STATUS_LED_BLINKING
 
 # define STATUS_LED_ACTIVE	1		/* LED on for bit == 0	*/
@@ -278,7 +278,7 @@ void status_led_set  (int led, int state);
 # define STATUS_LED_DAT		im_ioport.iop_padat
 
 # define STATUS_LED_BIT		0x00000300  /*  green + red    PA[8]=yellow,  PA[7]=red,  PA[6]=green */
-# define STATUS_LED_PERIOD	(CFG_HZ / 2)
+# define STATUS_LED_PERIOD	(CONFIG_SYS_HZ / 2)
 # define STATUS_LED_STATE	STATUS_LED_BLINKING
 
 # define STATUS_LED_ACTIVE	1		/* LED on for bit == 1	*/
@@ -292,7 +292,7 @@ void status_led_set  (int led, int state);
 # define STATUS_LED_DAT         im_cpm.cp_pbdat
 
 # define STATUS_LED_BIT         0x00000001
-# define STATUS_LED_PERIOD      (CFG_HZ / 2)
+# define STATUS_LED_PERIOD      (CONFIG_SYS_HZ / 2)
 # define STATUS_LED_STATE       STATUS_LED_BLINKING
 
 # define STATUS_LED_ACTIVE      1               /* LED on for bit == 1  */
@@ -308,10 +308,10 @@ void status_led_set  (int led, int state);
 # define STATUS_LED_DAT         im_ioport.iop_pcdat
 
 # define STATUS_LED_BIT         0x0002          /* LED 0 is on PC.14 */
-# define STATUS_LED_PERIOD      (CFG_HZ / 2)
+# define STATUS_LED_PERIOD      (CONFIG_SYS_HZ / 2)
 # define STATUS_LED_STATE       STATUS_LED_BLINKING
 # define STATUS_LED_BIT1        0x0004          /* LED 1 is on PC.13 */
-# define STATUS_LED_PERIOD1     (CFG_HZ)
+# define STATUS_LED_PERIOD1     (CONFIG_SYS_HZ)
 # define STATUS_LED_STATE1      STATUS_LED_OFF
 
 # define STATUS_LED_ACTIVE      1               /* LED on for bit == 1  */
@@ -326,7 +326,7 @@ void status_led_set  (int led, int state);
 # define STATUS_LED_DAT		im_ioport.iop_padat
 
 # define STATUS_LED_BIT		0x00000001	/* LED is on PA15 */
-# define STATUS_LED_PERIOD	(CFG_HZ / 2)
+# define STATUS_LED_PERIOD	(CONFIG_SYS_HZ / 2)
 # define STATUS_LED_STATE	STATUS_LED_BLINKING
 
 # define STATUS_LED_ACTIVE	1		/* LED on for bit == 1	*/
@@ -349,7 +349,7 @@ void status_led_set  (int led, int state);
 #elif defined(CONFIG_V38B)
 
 # define STATUS_LED_BIT		0x0010			/* Timer7 GPIO */
-# define STATUS_LED_PERIOD	(CFG_HZ / 2)
+# define STATUS_LED_PERIOD	(CONFIG_SYS_HZ / 2)
 # define STATUS_LED_STATE	STATUS_LED_BLINKING
 
 # define STATUS_LED_ACTIVE	0		/* LED on for bit == 0 */
@@ -358,11 +358,11 @@ void status_led_set  (int led, int state);
 #elif defined(CONFIG_MOTIONPRO)
 
 #define STATUS_LED_BIT		((vu_long *) MPC5XXX_GPT6_ENABLE)
-#define STATUS_LED_PERIOD	(CFG_HZ / 10)
+#define STATUS_LED_PERIOD	(CONFIG_SYS_HZ / 10)
 #define STATUS_LED_STATE	STATUS_LED_BLINKING
 
 #define STATUS_LED_BIT1		((vu_long *) MPC5XXX_GPT7_ENABLE)
-#define STATUS_LED_PERIOD1	(CFG_HZ / 10)
+#define STATUS_LED_PERIOD1	(CONFIG_SYS_HZ / 10)
 #define STATUS_LED_STATE1	STATUS_LED_OFF
 
 #define STATUS_LED_BOOT		0	/* LED 0 used for boot status */
diff --git a/include/timestamp.h b/include/timestamp.h
new file mode 100644
index 000000000..b2f4cf4d7
--- /dev/null
+++ b/include/timestamp.h
@@ -0,0 +1,30 @@
+/*
+ * Copyright 2008 Extreme Engineering Solutions, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef	__TIMESTAMP_H__
+#define	__TIMESTAMP_H__
+
+#ifndef DO_DEPS_ONLY
+#include "timestamp_autogenerated.h"
+#endif
+
+#endif	/* __TIMESTAMP_H__ */
diff --git a/drivers/net/tsec.h b/include/tsec.h
index 6a2338b46..7b52e06ab 100644
--- a/drivers/net/tsec.h
+++ b/include/tsec.h
@@ -20,19 +20,35 @@
 #include <net.h>
 #include <config.h>
 
-#ifndef CFG_TSEC1_OFFSET
-    #define CFG_TSEC1_OFFSET	(0x24000)
+#ifndef CONFIG_SYS_TSEC1_OFFSET
+    #define CONFIG_SYS_TSEC1_OFFSET	(0x24000)
 #endif
 
 #define TSEC_SIZE	0x01000
 
 /* FIXME:  Should these be pushed back to 83xx and 85xx config files? */
-#if defined(CONFIG_MPC85xx) || defined(CONFIG_MPC86xx)
-    #define TSEC_BASE_ADDR	(CFG_IMMR + CFG_TSEC1_OFFSET)
-#elif defined(CONFIG_MPC83XX)
-    #define TSEC_BASE_ADDR	(CFG_IMMR + CFG_TSEC1_OFFSET)
+#if defined(CONFIG_MPC85xx) || defined(CONFIG_MPC86xx) \
+	|| defined(CONFIG_MPC83XX)
+    #define TSEC_BASE_ADDR	(CONFIG_SYS_IMMR + CONFIG_SYS_TSEC1_OFFSET)
 #endif
 
+#define STD_TSEC_INFO(num) \
+{			\
+	.regs = (tsec_t *)(TSEC_BASE_ADDR + ((num - 1) * TSEC_SIZE)), \
+	.miiregs = (tsec_t *)TSEC_BASE_ADDR, \
+	.devname = CONFIG_TSEC##num##_NAME, \
+	.phyaddr = TSEC##num##_PHY_ADDR, \
+	.flags = TSEC##num##_FLAGS \
+}
+
+#define SET_STD_TSEC_INFO(x, num) \
+{			\
+	x.regs = (tsec_t *)(TSEC_BASE_ADDR + ((num - 1) * TSEC_SIZE)); \
+	x.miiregs = (tsec_t *)TSEC_BASE_ADDR; \
+	x.devname = CONFIG_TSEC##num##_NAME; \
+	x.phyaddr = TSEC##num##_PHY_ADDR; \
+	x.flags = TSEC##num##_FLAGS;\
+}
 
 #define MAC_ADDR_LEN 6
 
@@ -42,6 +58,27 @@
 
 #define PHY_AUTONEGOTIATE_TIMEOUT	5000 /* in ms */
 
+/* TBI register addresses */
+#define TBI_CR			0x00
+#define TBI_SR			0x01
+#define TBI_ANA			0x04
+#define TBI_ANLPBPA		0x05
+#define TBI_ANEX		0x06
+#define TBI_TBICON		0x11
+
+/* TBI MDIO register bit fields*/
+#define TBICON_CLK_SELECT	0x0020
+#define TBIANA_ASYMMETRIC_PAUSE 0x0100
+#define TBIANA_SYMMETRIC_PAUSE  0x0080
+#define TBIANA_HALF_DUPLEX	0x0040
+#define TBIANA_FULL_DUPLEX	0x0020
+#define TBICR_PHY_RESET		0x8000
+#define TBICR_ANEG_ENABLE	0x1000
+#define TBICR_RESTART_ANEG	0x0200
+#define TBICR_FULL_DUPLEX	0x0100
+#define TBICR_SPEED1_SET	0x0040
+
+
 /* MAC register bits */
 #define MACCFG1_SOFT_RESET	0x80000000
 #define MACCFG1_RESET_RX_MC	0x00080000
@@ -70,8 +107,8 @@
 #define miim_end -2
 #define miim_read -1
 
-#ifndef CFG_TBIPA_VALUE
-    #define CFG_TBIPA_VALUE	0x1f
+#ifndef CONFIG_SYS_TBIPA_VALUE
+    #define CONFIG_SYS_TBIPA_VALUE	0x1f
 #endif
 #define MIIMCFG_INIT_VALUE	0x00000003
 #define MIIMCFG_RESET		0x80000000
@@ -184,6 +221,17 @@
 #define MIIM_88E1111_PHY_LED_DIRECT	0x4100
 #define MIIM_88E1111_PHY_LED_COMBINE	0x411C
 
+/* 88E1121 PHY LED Control Register */
+#define MIIM_88E1121_PHY_LED_CTRL	16
+#define MIIM_88E1121_PHY_LED_PAGE	3
+#define MIIM_88E1121_PHY_LED_DEF	0x0030
+
+/* 88E1121 PHY IRQ Enable/Status Register */
+#define MIIM_88E1121_PHY_IRQ_EN		18
+#define MIIM_88E1121_PHY_IRQ_STATUS	19
+
+#define MIIM_88E1121_PHY_PAGE		22
+
 /* 88E1145 Extended PHY Specific Control Register */
 #define MIIM_88E1145_PHY_EXT_CR 20
 #define MIIM_M88E1145_RGMII_RX_DELAY	0x0080
@@ -515,7 +563,9 @@ typedef struct tsec
 
 /* This flag currently only has
  * meaning if we're using the eTSEC */
-#define TSEC_REDUCED (1 << 1)
+#define TSEC_REDUCED	(1 << 1)
+
+#define TSEC_SGMII	(1 << 2)
 
 struct tsec_private {
 	volatile tsec_t *regs;
@@ -576,4 +626,16 @@ struct phy_info {
 	struct phy_cmd *shutdown;
 };
 
+struct tsec_info_struct {
+	tsec_t *regs;
+	tsec_t *miiregs;
+	char *devname;
+	unsigned int phyaddr;
+	u32 flags;
+};
+
+int tsec_initialize(bd_t * bis, struct tsec_info_struct *tsec_info);
+int tsec_standard_init(bd_t *bis);
+int tsec_eth_init(bd_t *bis, struct tsec_info_struct *tsec_info, int num);
+
 #endif /* __TSEC_H */
diff --git a/include/ubi_uboot.h b/include/ubi_uboot.h
new file mode 100644
index 000000000..b4152192a
--- /dev/null
+++ b/include/ubi_uboot.h
@@ -0,0 +1,218 @@
+/*
+ * Header file for UBI support for U-Boot
+ *
+ * Adaptation from kernel to U-Boot
+ *
+ *  Copyright (C) 2005-2007 Samsung Electronics
+ *  Kyungmin Park <kyungmin.park@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __UBOOT_UBI_H
+#define __UBOOT_UBI_H
+
+#include <common.h>
+#include <malloc.h>
+#include <div64.h>
+#include <linux/crc32.h>
+#include <linux/mtd/mtd.h>
+
+#ifdef CONFIG_CMD_ONENAND
+#include <onenand_uboot.h>
+#endif
+
+#include <asm/errno.h>
+
+#define DPRINTK(format, args...)					\
+do {									\
+	printf("%s[%d]: " format "\n", __func__, __LINE__, ##args);	\
+} while (0)
+
+/* configurable */
+#define CONFIG_MTD_UBI_WL_THRESHOLD	4096
+#define CONFIG_MTD_UBI_BEB_RESERVE	1
+#define UBI_IO_DEBUG			0
+
+/* debug options (Linux: drivers/mtd/ubi/Kconfig.debug) */
+#undef CONFIG_MTD_UBI_DEBUG
+#undef CONFIG_MTD_UBI_DEBUG_PARANOID
+#undef CONFIG_MTD_UBI_DEBUG_MSG
+#undef CONFIG_MTD_UBI_DEBUG_MSG_EBA
+#undef CONFIG_MTD_UBI_DEBUG_MSG_WL
+#undef CONFIG_MTD_UBI_DEBUG_MSG_IO
+#undef CONFIG_MTD_UBI_DEBUG_MSG_BLD
+#define CONFIG_MTD_UBI_DEBUG_DISABLE_BGT
+
+/* compiler options */
+#define uninitialized_var(x)		x = x
+
+/* build.c */
+#define get_device(...)
+#define put_device(...)
+#define ubi_sysfs_init(...)		0
+#define ubi_sysfs_close(...)		do { } while (0)
+static inline int is_power_of_2(unsigned long n)
+{
+	return (n != 0 && ((n & (n - 1)) == 0));
+}
+
+/* FIXME */
+#define MKDEV(...)			0
+#define MAJOR(dev)			0
+#define MINOR(dev)			0
+
+#define alloc_chrdev_region(...)	0
+#define unregister_chrdev_region(...)
+
+#define class_create(...)		__builtin_return_address(0)
+#define class_create_file(...)		0
+#define class_remove_file(...)
+#define class_destroy(...)
+#define misc_register(...)		0
+#define misc_deregister(...)
+
+/* vmt.c */
+#define device_register(...)		0
+#define volume_sysfs_init(...)		0
+#define volume_sysfs_close(...)		do { } while (0)
+
+/* kapi.c */
+
+/* eba.c */
+
+/* io.c */
+#define init_waitqueue_head(...)	do { } while (0)
+#define wait_event_interruptible(...)	0
+#define wake_up_interruptible(...)	do { } while (0)
+#define print_hex_dump(...)		do { } while (0)
+#define dump_stack(...)			do { } while (0)
+
+/* wl.c */
+#define task_pid_nr(x)			0
+#define set_freezable(...)		do { } while (0)
+#define try_to_freeze(...)		0
+#define set_current_state(...)		do { } while (0)
+#define kthread_should_stop(...)	0
+#define schedule()			do { } while (0)
+
+/* upd.c */
+static inline unsigned long copy_from_user(void *dest, const void *src,
+					   unsigned long count)
+{
+	memcpy((void *)dest, (void *)src, count);
+	return 0;
+}
+
+/* common */
+typedef int	spinlock_t;
+typedef int	wait_queue_head_t;
+#define spin_lock_init(...)
+#define spin_lock(...)
+#define spin_unlock(...)
+
+#define mutex_init(...)
+#define mutex_lock(...)
+#define mutex_unlock(...)
+
+#define init_rwsem(...)			do { } while (0)
+#define down_read(...)			do { } while (0)
+#define down_write(...)			do { } while (0)
+#define down_write_trylock(...)		0
+#define up_read(...)			do { } while (0)
+#define up_write(...)			do { } while (0)
+
+struct kmem_cache { int i; };
+#define kmem_cache_create(...)		1
+#define kmem_cache_alloc(obj, gfp)	malloc(sizeof(struct ubi_wl_entry))
+#define kmem_cache_free(obj, size)	free(size)
+#define kmem_cache_destroy(...)
+
+#define cond_resched()			do { } while (0)
+#define yield()				do { } while (0)
+
+#define KERN_WARNING
+#define KERN_ERR
+#define KERN_NOTICE
+#define KERN_DEBUG
+
+#define GFP_KERNEL			0
+#define GFP_NOFS			1
+
+#define __user
+#define __init
+#define __exit
+
+#define kthread_create(...)	__builtin_return_address(0)
+#define kthread_stop(...)	do { } while (0)
+#define wake_up_process(...)	do { } while (0)
+
+#define BUS_ID_SIZE		20
+
+struct rw_semaphore { int i; };
+struct device {
+	struct device		*parent;
+	struct class		*class;
+	char	bus_id[BUS_ID_SIZE];	/* position on parent bus */
+	dev_t			devt;	/* dev_t, creates the sysfs "dev" */
+	void	(*release)(struct device *dev);
+};
+struct mutex { int i; };
+struct kernel_param { int i; };
+
+struct cdev {
+	int owner;
+	dev_t dev;
+};
+#define cdev_init(...)		do { } while (0)
+#define cdev_add(...)		0
+#define cdev_del(...)		do { } while (0)
+
+#define MAX_ERRNO		4095
+#define IS_ERR_VALUE(x)		((x) >= (unsigned long)-MAX_ERRNO)
+
+static inline void *ERR_PTR(long error)
+{
+	return (void *) error;
+}
+
+static inline long PTR_ERR(const void *ptr)
+{
+	return (long) ptr;
+}
+
+static inline long IS_ERR(const void *ptr)
+{
+	return IS_ERR_VALUE((unsigned long)ptr);
+}
+
+/* Force a compilation error if condition is true */
+#define BUILD_BUG_ON(condition) ((void)sizeof(char[1 - 2*!!(condition)]))
+
+/* module */
+#define THIS_MODULE		0
+#define try_module_get(...)	0
+#define module_put(...)		do { } while (0)
+#define module_init(...)
+#define module_exit(...)
+#define EXPORT_SYMBOL(...)
+#define EXPORT_SYMBOL_GPL(...)
+#define module_param_call(...)
+#define MODULE_PARM_DESC(...)
+#define MODULE_VERSION(...)
+#define MODULE_DESCRIPTION(...)
+#define MODULE_AUTHOR(...)
+#define MODULE_LICENSE(...)
+
+#include "../drivers/mtd/ubi/ubi.h"
+
+/* functions */
+extern int ubi_mtd_param_parse(const char *val, struct kernel_param *kp);
+extern int ubi_init(void);
+extern void ubi_exit(void);
+
+extern struct ubi_device *ubi_devices[];
+
+#endif
diff --git a/include/usb.h b/include/usb.h
index e68e98ead..510df95d6 100644
--- a/include/usb.h
+++ b/include/usb.h
@@ -43,104 +43,114 @@
 
 /* String descriptor */
 struct usb_string_descriptor {
-	unsigned char  bLength;
-	unsigned char  bDescriptorType;
-	unsigned short wData[1];
+	unsigned char	bLength;
+	unsigned char	bDescriptorType;
+	unsigned short	wData[1];
 } __attribute__ ((packed));
 
 /* device request (setup) */
 struct devrequest {
-	unsigned char requesttype;
-	unsigned char request;
-	unsigned short value;
-	unsigned short index;
-	unsigned short length;
+	unsigned char	requesttype;
+	unsigned char	request;
+	unsigned short	value;
+	unsigned short	index;
+	unsigned short	length;
 } __attribute__ ((packed));
 
-
 /* All standard descriptors have these 2 fields in common */
 struct usb_descriptor_header {
-	unsigned char  bLength;
-	unsigned char  bDescriptorType;
+	unsigned char	bLength;
+	unsigned char	bDescriptorType;
 } __attribute__ ((packed));
 
 /* Device descriptor */
 struct usb_device_descriptor {
-	unsigned char  bLength;
-	unsigned char  bDescriptorType;
-	unsigned short bcdUSB;
-	unsigned char  bDeviceClass;
-	unsigned char  bDeviceSubClass;
-	unsigned char  bDeviceProtocol;
-	unsigned char  bMaxPacketSize0;
-	unsigned short idVendor;
-	unsigned short idProduct;
-	unsigned short bcdDevice;
-	unsigned char  iManufacturer;
-	unsigned char  iProduct;
-	unsigned char  iSerialNumber;
-	unsigned char  bNumConfigurations;
+	unsigned char	bLength;
+	unsigned char	bDescriptorType;
+	unsigned short	bcdUSB;
+	unsigned char	bDeviceClass;
+	unsigned char	bDeviceSubClass;
+	unsigned char	bDeviceProtocol;
+	unsigned char	bMaxPacketSize0;
+	unsigned short	idVendor;
+	unsigned short	idProduct;
+	unsigned short	bcdDevice;
+	unsigned char	iManufacturer;
+	unsigned char	iProduct;
+	unsigned char	iSerialNumber;
+	unsigned char	bNumConfigurations;
 } __attribute__ ((packed));
 
-
 /* Endpoint descriptor */
 struct usb_endpoint_descriptor {
-	unsigned char  bLength;
-	unsigned char  bDescriptorType;
-	unsigned char  bEndpointAddress;
-	unsigned char  bmAttributes;
-	unsigned short wMaxPacketSize;
-	unsigned char  bInterval;
-	unsigned char  bRefresh;
-	unsigned char  bSynchAddress;
+	unsigned char	bLength;
+	unsigned char	bDescriptorType;
+	unsigned char	bEndpointAddress;
+	unsigned char	bmAttributes;
+	unsigned short	wMaxPacketSize;
+	unsigned char	bInterval;
+	unsigned char	bRefresh;
+	unsigned char	bSynchAddress;
+} __attribute__ ((packed)) __attribute__ ((aligned(2)));
 
-} __attribute__ ((packed));
 /* Interface descriptor */
 struct usb_interface_descriptor {
-	unsigned char  bLength;
-	unsigned char  bDescriptorType;
-	unsigned char  bInterfaceNumber;
-	unsigned char  bAlternateSetting;
-	unsigned char  bNumEndpoints;
-	unsigned char  bInterfaceClass;
-	unsigned char  bInterfaceSubClass;
-	unsigned char  bInterfaceProtocol;
-	unsigned char  iInterface;
-
-	unsigned char  no_of_ep;
-	unsigned char  num_altsetting;
-	unsigned char  act_altsetting;
+	unsigned char	bLength;
+	unsigned char	bDescriptorType;
+	unsigned char	bInterfaceNumber;
+	unsigned char	bAlternateSetting;
+	unsigned char	bNumEndpoints;
+	unsigned char	bInterfaceClass;
+	unsigned char	bInterfaceSubClass;
+	unsigned char	bInterfaceProtocol;
+	unsigned char	iInterface;
+
+	unsigned char	no_of_ep;
+	unsigned char	num_altsetting;
+	unsigned char	act_altsetting;
+
 	struct usb_endpoint_descriptor ep_desc[USB_MAXENDPOINTS];
 } __attribute__ ((packed));
 
 
 /* Configuration descriptor information.. */
 struct usb_config_descriptor {
-	unsigned char  bLength;
-	unsigned char  bDescriptorType;
-	unsigned short wTotalLength;
-	unsigned char  bNumInterfaces;
-	unsigned char  bConfigurationValue;
-	unsigned char  iConfiguration;
-	unsigned char  bmAttributes;
-	unsigned char  MaxPower;
-
-	unsigned char  no_of_if;		/* number of interfaces */
+	unsigned char	bLength;
+	unsigned char	bDescriptorType;
+	unsigned short	wTotalLength;
+	unsigned char	bNumInterfaces;
+	unsigned char	bConfigurationValue;
+	unsigned char	iConfiguration;
+	unsigned char	bmAttributes;
+	unsigned char	MaxPower;
+
+	unsigned char	no_of_if;	/* number of interfaces */
 	struct usb_interface_descriptor if_desc[USB_MAXINTERFACES];
 } __attribute__ ((packed));
 
+enum {
+	/* Maximum packet size; encoded as 0,1,2,3 = 8,16,32,64 */
+	PACKET_SIZE_8   = 0,
+	PACKET_SIZE_16  = 1,
+	PACKET_SIZE_32  = 2,
+	PACKET_SIZE_64  = 3,
+};
 
 struct usb_device {
-	int devnum;			/* Device number on USB bus */
-	int slow;			/* Slow device? */
-	char mf[32];			/* manufacturer */
-	char prod[32];			/* product */
-	char serial[32];		/* serial number */
-
-	int maxpacketsize;		/* Maximum packet size; encoded as 0,1,2,3 = 8,16,32,64 */
-	unsigned int toggle[2];		/* one bit for each endpoint ([0] = IN, [1] = OUT) */
-	unsigned int halted[2];		/* endpoint halts; one bit per endpoint # & direction; */
-			    /* [0] = IN, [1] = OUT */
+	int	devnum;			/* Device number on USB bus */
+	int	slow;			/* Slow device? */
+	char	mf[32];			/* manufacturer */
+	char	prod[32];		/* product */
+	char	serial[32];		/* serial number */
+
+	/* Maximum packet size; one of: PACKET_SIZE_* */
+	int maxpacketsize;
+	/* one bit for each endpoint ([0] = IN, [1] = OUT) */
+	unsigned int toggle[2];
+	/* endpoint halts; one bit per endpoint # & direction;
+	 * [0] = IN, [1] = OUT
+	 */
+	unsigned int halted[2];
 	int epmaxpacketin[16];		/* INput endpoint specific maximums */
 	int epmaxpacketout[16];		/* OUTput endpoint specific maximums */
 
@@ -170,21 +180,22 @@ struct usb_device {
  */
 
 #if defined(CONFIG_USB_UHCI) || defined(CONFIG_USB_OHCI) || \
-	defined(CONFIG_USB_OHCI_NEW) || defined (CONFIG_USB_SL811HS) || \
+	defined(CONFIG_USB_OHCI_NEW) || defined(CONFIG_USB_SL811HS) || \
 	defined(CONFIG_USB_ISP116X_HCD) || defined(CONFIG_USB_R8A66597_HCD)
 
 int usb_lowlevel_init(void);
 int usb_lowlevel_stop(void);
-int submit_bulk_msg(struct usb_device *dev, unsigned long pipe, void *buffer,int transfer_len);
+int submit_bulk_msg(struct usb_device *dev, unsigned long pipe,
+			void *buffer, int transfer_len);
 int submit_control_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
-			int transfer_len,struct devrequest *setup);
+			int transfer_len, struct devrequest *setup);
 int submit_int_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
 			int transfer_len, int interval);
 void usb_event_poll(void);
 
 /* Defines */
-#define USB_UHCI_VEND_ID 0x8086
-#define USB_UHCI_DEV_ID	 0x7112
+#define USB_UHCI_VEND_ID	0x8086
+#define USB_UHCI_DEV_ID		0x7112
 
 #else
 #error USB Lowlevel not defined
@@ -211,8 +222,9 @@ int usb_stop(void); /* stop the USB Controller */
 
 
 int usb_set_protocol(struct usb_device *dev, int ifnum, int protocol);
-int usb_set_idle(struct usb_device *dev, int ifnum, int duration, int report_id);
-struct usb_device * usb_get_dev_index(int index);
+int usb_set_idle(struct usb_device *dev, int ifnum, int duration,
+			int report_id);
+struct usb_device *usb_get_dev_index(int index);
 int usb_control_msg(struct usb_device *dev, unsigned int pipe,
 			unsigned char request, unsigned char requesttype,
 			unsigned short value, unsigned short index,
@@ -220,14 +232,17 @@ int usb_control_msg(struct usb_device *dev, unsigned int pipe,
 int usb_bulk_msg(struct usb_device *dev, unsigned int pipe,
 			void *data, int len, int *actual_length, int timeout);
 int usb_submit_int_msg(struct usb_device *dev, unsigned long pipe,
-			void *buffer,int transfer_len, int interval);
+			void *buffer, int transfer_len, int interval);
 void usb_disable_asynch(int disable);
-int usb_maxpacket(struct usb_device *dev,unsigned long pipe);
-void __inline__ wait_ms(unsigned long ms);
-int usb_get_configuration_no(struct usb_device *dev,unsigned char *buffer,int cfgno);
-int usb_get_report(struct usb_device *dev, int ifnum, unsigned char type, unsigned char id, void *buf, int size);
+int usb_maxpacket(struct usb_device *dev, unsigned long pipe);
+inline void wait_ms(unsigned long ms);
+int usb_get_configuration_no(struct usb_device *dev, unsigned char *buffer,
+				int cfgno);
+int usb_get_report(struct usb_device *dev, int ifnum, unsigned char type,
+			unsigned char id, void *buf, int size);
 int usb_get_class_descriptor(struct usb_device *dev, int ifnum,
-		unsigned char type, unsigned char id, void *buf, int size);
+			unsigned char type, unsigned char id, void *buf,
+			int size);
 int usb_clear_halt(struct usb_device *dev, int pipe);
 int usb_string(struct usb_device *dev, int index, char *buf, size_t size);
 int usb_set_interface(struct usb_device *dev, int interface, int alternate);
@@ -237,7 +252,7 @@ int usb_set_interface(struct usb_device *dev, int interface, int alternate);
 #define __swap_16(x) \
 	({ unsigned short x_ = (unsigned short)x; \
 	 (unsigned short)( \
-		((x_ & 0x00FFU) << 8) | ((x_ & 0xFF00U) >> 8) ); \
+		((x_ & 0x00FFU) << 8) | ((x_ & 0xFF00U) >> 8)); \
 	})
 #define __swap_32(x) \
 	({ unsigned long x_ = (unsigned long)x; \
@@ -245,7 +260,7 @@ int usb_set_interface(struct usb_device *dev, int interface, int alternate);
 		((x_ & 0x000000FFUL) << 24) | \
 		((x_ & 0x0000FF00UL) <<	 8) | \
 		((x_ & 0x00FF0000UL) >>	 8) | \
-		((x_ & 0xFF000000UL) >> 24) ); \
+		((x_ & 0xFF000000UL) >> 24)); \
 	})
 
 #ifdef LITTLEENDIAN
@@ -276,12 +291,14 @@ int usb_set_interface(struct usb_device *dev, int interface, int alternate);
  * unsigned int. The encoding is:
  *
  *  - max size:		bits 0-1	(00 = 8, 01 = 16, 10 = 32, 11 = 64)
- *  - direction:	bit 7		(0 = Host-to-Device [Out], 1 = Device-to-Host [In])
+ *  - direction:	bit 7		(0 = Host-to-Device [Out],
+ *					(1 = Device-to-Host [In])
  *  - device:		bits 8-14
  *  - endpoint:		bits 15-18
  *  - Data0/1:		bit 19
  *  - speed:		bit 26		(0 = Full, 1 = Low Speed)
- *  - pipe type:	bits 30-31	(00 = isochronous, 01 = interrupt, 10 = control, 11 = bulk)
+ *  - pipe type:	bits 30-31	(00 = isochronous, 01 = interrupt,
+ *					 10 = control, 11 = bulk)
  *
  * Why? Because it's arbitrary, and whatever encoding we select is really
  * up to us. This one happens to share a lot of bit positions with the UHCI
@@ -290,24 +307,42 @@ int usb_set_interface(struct usb_device *dev, int interface, int alternate);
  */
 /* Create various pipes... */
 #define create_pipe(dev,endpoint) \
-		(((dev)->devnum << 8) | (endpoint << 15) | ((dev)->slow << 26) | (dev)->maxpacketsize)
-#define default_pipe(dev) ((dev)->slow <<26)
-
-#define usb_sndctrlpipe(dev,endpoint)	((PIPE_CONTROL << 30) | create_pipe(dev,endpoint))
-#define usb_rcvctrlpipe(dev,endpoint)	((PIPE_CONTROL << 30) | create_pipe(dev,endpoint) | USB_DIR_IN)
-#define usb_sndisocpipe(dev,endpoint)	((PIPE_ISOCHRONOUS << 30) | create_pipe(dev,endpoint))
-#define usb_rcvisocpipe(dev,endpoint)	((PIPE_ISOCHRONOUS << 30) | create_pipe(dev,endpoint) | USB_DIR_IN)
-#define usb_sndbulkpipe(dev,endpoint)	((PIPE_BULK << 30) | create_pipe(dev,endpoint))
-#define usb_rcvbulkpipe(dev,endpoint)	((PIPE_BULK << 30) | create_pipe(dev,endpoint) | USB_DIR_IN)
-#define usb_sndintpipe(dev,endpoint)	((PIPE_INTERRUPT << 30) | create_pipe(dev,endpoint))
-#define usb_rcvintpipe(dev,endpoint)	((PIPE_INTERRUPT << 30) | create_pipe(dev,endpoint) | USB_DIR_IN)
-#define usb_snddefctrl(dev)		((PIPE_CONTROL << 30) | default_pipe(dev))
-#define usb_rcvdefctrl(dev)		((PIPE_CONTROL << 30) | default_pipe(dev) | USB_DIR_IN)
+		(((dev)->devnum << 8) | (endpoint << 15) | \
+		((dev)->slow << 26) | (dev)->maxpacketsize)
+#define default_pipe(dev) ((dev)->slow << 26)
+
+#define usb_sndctrlpipe(dev, endpoint)	((PIPE_CONTROL << 30) | \
+					 create_pipe(dev, endpoint))
+#define usb_rcvctrlpipe(dev, endpoint)	((PIPE_CONTROL << 30) | \
+					 create_pipe(dev, endpoint) | \
+					 USB_DIR_IN)
+#define usb_sndisocpipe(dev, endpoint)	((PIPE_ISOCHRONOUS << 30) | \
+					 create_pipe(dev, endpoint))
+#define usb_rcvisocpipe(dev, endpoint)	((PIPE_ISOCHRONOUS << 30) | \
+					 create_pipe(dev, endpoint) | \
+					 USB_DIR_IN)
+#define usb_sndbulkpipe(dev, endpoint)	((PIPE_BULK << 30) | \
+					 create_pipe(dev, endpoint))
+#define usb_rcvbulkpipe(dev, endpoint)	((PIPE_BULK << 30) | \
+					 create_pipe(dev, endpoint) | \
+					 USB_DIR_IN)
+#define usb_sndintpipe(dev, endpoint)	((PIPE_INTERRUPT << 30) | \
+					 create_pipe(dev, endpoint))
+#define usb_rcvintpipe(dev, endpoint)	((PIPE_INTERRUPT << 30) | \
+					 create_pipe(dev, endpoint) | \
+					 USB_DIR_IN)
+#define usb_snddefctrl(dev)		((PIPE_CONTROL << 30) | \
+					 default_pipe(dev))
+#define usb_rcvdefctrl(dev)		((PIPE_CONTROL << 30) | \
+					 default_pipe(dev) | \
+					 USB_DIR_IN)
 
 /* The D0/D1 toggle bits */
 #define usb_gettoggle(dev, ep, out) (((dev)->toggle[out] >> ep) & 1)
 #define usb_dotoggle(dev, ep, out)  ((dev)->toggle[out] ^= (1 << ep))
-#define usb_settoggle(dev, ep, out, bit) ((dev)->toggle[out] = ((dev)->toggle[out] & ~(1 << ep)) | ((bit) << ep))
+#define usb_settoggle(dev, ep, out, bit) ((dev)->toggle[out] = \
+						((dev)->toggle[out] & \
+						 ~(1 << ep)) | ((bit) << ep))
 
 /* Endpoint halt control/status */
 #define usb_endpoint_out(ep_dir)	(((ep_dir >> 7) & 1) ^ 1)
@@ -315,7 +350,8 @@ int usb_set_interface(struct usb_device *dev, int interface, int alternate);
 #define usb_endpoint_running(dev, ep, out) ((dev)->halted[out] &= ~(1 << (ep)))
 #define usb_endpoint_halted(dev, ep, out) ((dev)->halted[out] & (1 << (ep)))
 
-#define usb_packetid(pipe)	(((pipe) & USB_DIR_IN) ? USB_PID_IN : USB_PID_OUT)
+#define usb_packetid(pipe)	(((pipe) & USB_DIR_IN) ? USB_PID_IN : \
+				 USB_PID_OUT)
 
 #define usb_pipeout(pipe)	((((pipe) >> 7) & 1) ^ 1)
 #define usb_pipein(pipe)	(((pipe) >> 7) & 1)
@@ -355,7 +391,7 @@ struct usb_hub_descriptor {
 	unsigned char  bHubContrCurrent;
 	unsigned char  DeviceRemovable[(USB_MAXCHILDREN+1+7)/8];
 	unsigned char  PortPowerCtrlMask[(USB_MAXCHILDREN+1+7)/8];
-		/* DeviceRemovable and PortPwrCtrlMask want to be variable-length
+	/* DeviceRemovable and PortPwrCtrlMask want to be variable-length
 	   bitmaps that hold max 255 entries. (bit0 is ignored) */
 } __attribute__ ((packed));
 
diff --git a/include/usbdcore.h b/include/usbdcore.h
index cb2be7280..206dbbc86 100644
--- a/include/usbdcore.h
+++ b/include/usbdcore.h
@@ -126,14 +126,6 @@
 				})
 #endif
 
-#ifndef MIN
-#define MIN(a,b) ((a) < (b) ? (a) : (b))
-#endif
-#ifndef MAX
-#define MAX(a,b) ((a) > (b) ? (a) : (b))
-#endif
-
-
 /*
  * Structure member address manipulation macros.
  * These are used by client code (code using the urb_link routines), since
diff --git a/include/usbdcore_omap1510.h b/include/usbdcore_omap1510.h
index 526fcd920..ece0e95b6 100644
--- a/include/usbdcore_omap1510.h
+++ b/include/usbdcore_omap1510.h
@@ -168,8 +168,8 @@
 #define UDC_IN_ENDPOINT	1
 #define UDC_IN_PACKET_SIZE 64
 #define UDC_INT_ENDPOINT 5
-#define UDC_INT_PKTSIZE	16
-#define UDC_BULK_PKTSIZE 16
+#define UDC_INT_PACKET_SIZE	16
+#define UDC_BULK_PACKET_SIZE 16
 
 void udc_irq (void);
 /* Flow control */
@@ -177,7 +177,7 @@ void udc_set_nak(int epid);
 void udc_unset_nak (int epid);
 
 /* Higher level functions for abstracting away from specific device */
-void udc_endpoint_write(struct usb_endpoint_instance *endpoint);
+int udc_endpoint_write(struct usb_endpoint_instance *endpoint);
 
 int  udc_init (void);
 
diff --git a/include/vxworks.h b/include/vxworks.h
new file mode 100644
index 000000000..1633904bd
--- /dev/null
+++ b/include/vxworks.h
@@ -0,0 +1,53 @@
+/*
+ * (C) Copyright 2008
+ * Niklaus Giger, niklaus.giger@member.fsf.org
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef _VXWORKS_H_
+#define _VXWORKS_H_
+
+int do_bootvx(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
+
+/*
+ * Use bootaddr to find the location in memory that VxWorks
+ * will look for the bootline string. The default value for
+ * PowerPC is LOCAL_MEM_LOCAL_ADRS + BOOT_LINE_OFFSET which
+ * defaults to 0x4200
+ */
+#ifndef CONFIG_SYS_VXWORKS_BOOT_ADDR
+#define CONFIG_SYS_VXWORKS_BOOT_ADDR 0x4200
+#endif
+
+#ifndef CONFIG_SYS_VXWORKS_BOOT_DEVICE
+#if defined(CONFIG_4xx)
+#define		CONFIG_SYS_VXWORKS_BOOT_DEVICE "emac(0,0)"
+#elif defined(CONFIG_IOP480)
+#define		CONFIG_SYS_VXWORKS_BOOT_DEVICE "dc(0,0)"
+#else
+#define		CONFIG_SYS_VXWORKS_BOOT_DEVICE "eth(0,0)"
+#endif
+#endif
+
+#ifndef CONFIG_SYS_VXWORKS_SERVERNAME
+#define CONFIG_SYS_VXWORKS_SERVERNAME	"srv"
+#endif
+
+#endif
diff --git a/include/w83c553f.h b/include/w83c553f.h
index 88ea9da6a..6a76f5a7b 100644
--- a/include/w83c553f.h
+++ b/include/w83c553f.h
@@ -73,30 +73,30 @@
 /*
  * Interrupt controller
  */
-#define W83C553F_PIC1_ICW1	CFG_ISA_IO + 0x20
-#define W83C553F_PIC1_ICW2	CFG_ISA_IO + 0x21
-#define W83C553F_PIC1_ICW3	CFG_ISA_IO + 0x21
-#define W83C553F_PIC1_ICW4	CFG_ISA_IO + 0x21
-#define W83C553F_PIC1_OCW1	CFG_ISA_IO + 0x21
-#define W83C553F_PIC1_OCW2	CFG_ISA_IO + 0x20
-#define W83C553F_PIC1_OCW3	CFG_ISA_IO + 0x20
-#define W83C553F_PIC1_ELC	CFG_ISA_IO + 0x4D0
-#define W83C553F_PIC2_ICW1	CFG_ISA_IO + 0xA0
-#define W83C553F_PIC2_ICW2	CFG_ISA_IO + 0xA1
-#define W83C553F_PIC2_ICW3	CFG_ISA_IO + 0xA1
-#define W83C553F_PIC2_ICW4	CFG_ISA_IO + 0xA1
-#define W83C553F_PIC2_OCW1	CFG_ISA_IO + 0xA1
-#define W83C553F_PIC2_OCW2	CFG_ISA_IO + 0xA0
-#define W83C553F_PIC2_OCW3	CFG_ISA_IO + 0xA0
-#define W83C553F_PIC2_ELC	CFG_ISA_IO + 0x4D1
-
-#define W83C553F_TMR1_CMOD	CFG_ISA_IO + 0x43
+#define W83C553F_PIC1_ICW1	CONFIG_SYS_ISA_IO + 0x20
+#define W83C553F_PIC1_ICW2	CONFIG_SYS_ISA_IO + 0x21
+#define W83C553F_PIC1_ICW3	CONFIG_SYS_ISA_IO + 0x21
+#define W83C553F_PIC1_ICW4	CONFIG_SYS_ISA_IO + 0x21
+#define W83C553F_PIC1_OCW1	CONFIG_SYS_ISA_IO + 0x21
+#define W83C553F_PIC1_OCW2	CONFIG_SYS_ISA_IO + 0x20
+#define W83C553F_PIC1_OCW3	CONFIG_SYS_ISA_IO + 0x20
+#define W83C553F_PIC1_ELC	CONFIG_SYS_ISA_IO + 0x4D0
+#define W83C553F_PIC2_ICW1	CONFIG_SYS_ISA_IO + 0xA0
+#define W83C553F_PIC2_ICW2	CONFIG_SYS_ISA_IO + 0xA1
+#define W83C553F_PIC2_ICW3	CONFIG_SYS_ISA_IO + 0xA1
+#define W83C553F_PIC2_ICW4	CONFIG_SYS_ISA_IO + 0xA1
+#define W83C553F_PIC2_OCW1	CONFIG_SYS_ISA_IO + 0xA1
+#define W83C553F_PIC2_OCW2	CONFIG_SYS_ISA_IO + 0xA0
+#define W83C553F_PIC2_OCW3	CONFIG_SYS_ISA_IO + 0xA0
+#define W83C553F_PIC2_ELC	CONFIG_SYS_ISA_IO + 0x4D1
+
+#define W83C553F_TMR1_CMOD	CONFIG_SYS_ISA_IO + 0x43
 
 /*
  * DMA controller
  */
-#define W83C553F_DMA1	CFG_ISA_IO + 0x000	/* channel 0 - 3 */
-#define W83C553F_DMA2	CFG_ISA_IO + 0x0C0	/* channel 4 - 7 */
+#define W83C553F_DMA1	CONFIG_SYS_ISA_IO + 0x000	/* channel 0 - 3 */
+#define W83C553F_DMA2	CONFIG_SYS_ISA_IO + 0x0C0	/* channel 4 - 7 */
 
 /* command/status register bit definitions */
 
diff --git a/include/xilinx.h b/include/xilinx.h
index ad33e1f28..fdc358725 100644
--- a/include/xilinx.h
+++ b/include/xilinx.h
@@ -29,25 +29,25 @@
 
 /* Xilinx Model definitions
  *********************************************************************/
-#define CFG_SPARTAN2			CFG_FPGA_DEV( 0x1 )
-#define CFG_VIRTEX_E			CFG_FPGA_DEV( 0x2 )
-#define CFG_VIRTEX2			CFG_FPGA_DEV( 0x4 )
-#define CFG_SPARTAN3			CFG_FPGA_DEV( 0x8 )
-#define CFG_XILINX_SPARTAN2	(CFG_FPGA_XILINX | CFG_SPARTAN2)
-#define CFG_XILINX_VIRTEX_E	(CFG_FPGA_XILINX | CFG_VIRTEX_E)
-#define CFG_XILINX_VIRTEX2	(CFG_FPGA_XILINX | CFG_VIRTEX2)
-#define CFG_XILINX_SPARTAN3	(CFG_FPGA_XILINX | CFG_SPARTAN3)
+#define CONFIG_SYS_SPARTAN2			CONFIG_SYS_FPGA_DEV( 0x1 )
+#define CONFIG_SYS_VIRTEX_E			CONFIG_SYS_FPGA_DEV( 0x2 )
+#define CONFIG_SYS_VIRTEX2			CONFIG_SYS_FPGA_DEV( 0x4 )
+#define CONFIG_SYS_SPARTAN3			CONFIG_SYS_FPGA_DEV( 0x8 )
+#define CONFIG_SYS_XILINX_SPARTAN2	(CONFIG_SYS_FPGA_XILINX | CONFIG_SYS_SPARTAN2)
+#define CONFIG_SYS_XILINX_VIRTEX_E	(CONFIG_SYS_FPGA_XILINX | CONFIG_SYS_VIRTEX_E)
+#define CONFIG_SYS_XILINX_VIRTEX2	(CONFIG_SYS_FPGA_XILINX | CONFIG_SYS_VIRTEX2)
+#define CONFIG_SYS_XILINX_SPARTAN3	(CONFIG_SYS_FPGA_XILINX | CONFIG_SYS_SPARTAN3)
 /* XXX - Add new models here */
 
 
 /* Xilinx Interface definitions
  *********************************************************************/
-#define CFG_XILINX_IF_SS	CFG_FPGA_IF( 0x1 )	/* slave serial		*/
-#define CFG_XILINX_IF_MS	CFG_FPGA_IF( 0x2 )	/* master serial	*/
-#define CFG_XILINX_IF_SP	CFG_FPGA_IF( 0x4 )	/* slave parallel	*/
-#define CFG_XILINX_IF_JTAG	CFG_FPGA_IF( 0x8 )	/* jtag			*/
-#define CFG_XILINX_IF_MSM	CFG_FPGA_IF( 0x10 )	/* master selectmap	*/
-#define CFG_XILINX_IF_SSM	CFG_FPGA_IF( 0x20 )	/* slave selectmap	*/
+#define CONFIG_SYS_XILINX_IF_SS	CONFIG_SYS_FPGA_IF( 0x1 )	/* slave serial		*/
+#define CONFIG_SYS_XILINX_IF_MS	CONFIG_SYS_FPGA_IF( 0x2 )	/* master serial	*/
+#define CONFIG_SYS_XILINX_IF_SP	CONFIG_SYS_FPGA_IF( 0x4 )	/* slave parallel	*/
+#define CONFIG_SYS_XILINX_IF_JTAG	CONFIG_SYS_FPGA_IF( 0x8 )	/* jtag			*/
+#define CONFIG_SYS_XILINX_IF_MSM	CONFIG_SYS_FPGA_IF( 0x10 )	/* master selectmap	*/
+#define CONFIG_SYS_XILINX_IF_SSM	CONFIG_SYS_FPGA_IF( 0x20 )	/* slave selectmap	*/
 
 /* Xilinx types
  *********************************************************************/
diff --git a/lib_arm/board.c b/lib_arm/board.c
index 5ade882a9..2358bebdb 100644
--- a/lib_arm/board.c
+++ b/lib_arm/board.c
@@ -42,6 +42,7 @@
 #include <command.h>
 #include <malloc.h>
 #include <devices.h>
+#include <timestamp.h>
 #include <version.h>
 #include <net.h>
 #include <serial.h>
@@ -69,7 +70,7 @@ extern void dataflash_print_info(void);
 #endif
 
 const char version_string[] =
-	U_BOOT_VERSION" (" __DATE__ " - " __TIME__ ")"CONFIG_IDENT_STRING;
+	U_BOOT_VERSION" (" U_BOOT_DATE " - " U_BOOT_TIME ")"CONFIG_IDENT_STRING;
 
 #ifdef CONFIG_DRIVER_CS8900
 extern void cs8900_get_enetaddr (uchar * addr);
@@ -95,7 +96,7 @@ static
 void mem_malloc_init (ulong dest_addr)
 {
 	mem_malloc_start = dest_addr;
-	mem_malloc_end = dest_addr + CFG_MALLOC_LEN;
+	mem_malloc_end = dest_addr + CONFIG_SYS_MALLOC_LEN;
 	mem_malloc_brk = mem_malloc_start;
 
 	memset ((void *) mem_malloc_start, 0,
@@ -202,36 +203,24 @@ static int display_dram_config (void)
 	return (0);
 }
 
-#ifndef CFG_NO_FLASH
+#ifndef CONFIG_SYS_NO_FLASH
 static void display_flash_config (ulong size)
 {
 	puts ("Flash: ");
 	print_size (size, "\n");
 }
-#endif /* CFG_NO_FLASH */
+#endif /* CONFIG_SYS_NO_FLASH */
 
 #if defined(CONFIG_HARD_I2C) || defined(CONFIG_SOFT_I2C)
 static int init_func_i2c (void)
 {
 	puts ("I2C:   ");
-	i2c_init (CFG_I2C_SPEED, CFG_I2C_SLAVE);
+	i2c_init (CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
 	puts ("ready\n");
 	return (0);
 }
 #endif
 
-#ifdef CONFIG_SKIP_RELOCATE_UBOOT
-/*
- * This routine sets the relocation done flag, because even if
- * relocation is skipped, the flag is used by other generic code.
- */
-static int reloc_init(void)
-{
-	gd->flags |= GD_FLG_RELOC;
-	return 0;
-}
-#endif
-
 /*
  * Breathe some life into the board...
  *
@@ -261,11 +250,6 @@ int print_cpuinfo (void); /* test-only */
 
 init_fnc_t *init_sequence[] = {
 	cpu_init,		/* basic cpu dependent setup */
-#if defined(CONFIG_SKIP_RELOCATE_UBOOT)
-	reloc_init,		/* Set the relocation done flag, must
-				   do this AFTER cpu_init(), but as soon
-				   as possible */
-#endif
 	board_init,		/* basic board dependent setup */
 	interrupt_init,		/* set up exceptions */
 	env_init,		/* initialize environment */
@@ -291,7 +275,7 @@ void start_armboot (void)
 {
 	init_fnc_t **init_fnc_ptr;
 	char *s;
-#if !defined(CFG_NO_FLASH) || defined (CONFIG_VFD) || defined(CONFIG_LCD)
+#if !defined(CONFIG_SYS_NO_FLASH) || defined (CONFIG_VFD) || defined(CONFIG_LCD)
 	ulong size;
 #endif
 #if defined(CONFIG_VFD) || defined(CONFIG_LCD)
@@ -299,7 +283,7 @@ void start_armboot (void)
 #endif
 
 	/* Pointer is writable since we allocated a register for it */
-	gd = (gd_t*)(_armboot_start - CFG_MALLOC_LEN - sizeof(gd_t));
+	gd = (gd_t*)(_armboot_start - CONFIG_SYS_MALLOC_LEN - sizeof(gd_t));
 	/* compiler optimization barrier needed for GCC >= 3.4 */
 	__asm__ __volatile__("": : :"memory");
 
@@ -307,6 +291,8 @@ void start_armboot (void)
 	gd->bd = (bd_t*)((char*)gd - sizeof(bd_t));
 	memset (gd->bd, 0, sizeof (bd_t));
 
+	gd->flags |= GD_FLG_RELOC;
+
 	monitor_flash_len = _bss_start - _armboot_start;
 
 	for (init_fnc_ptr = init_sequence; *init_fnc_ptr; ++init_fnc_ptr) {
@@ -315,11 +301,11 @@ void start_armboot (void)
 		}
 	}
 
-#ifndef CFG_NO_FLASH
+#ifndef CONFIG_SYS_NO_FLASH
 	/* configure available FLASH banks */
 	size = flash_init ();
 	display_flash_config (size);
-#endif /* CFG_NO_FLASH */
+#endif /* CONFIG_SYS_NO_FLASH */
 
 #ifdef CONFIG_VFD
 #	ifndef PAGE_SIZE
@@ -351,7 +337,7 @@ void start_armboot (void)
 #endif /* CONFIG_LCD */
 
 	/* armboot_start is defined in the board-specific linker script */
-	mem_malloc_init (_armboot_start - CFG_MALLOC_LEN);
+	mem_malloc_init (_armboot_start - CONFIG_SYS_MALLOC_LEN);
 
 #if defined(CONFIG_CMD_NAND)
 	puts ("NAND:  ");
@@ -513,7 +499,7 @@ int mdm_init (void)
 			serial_puts(init_str);
 			serial_puts("\n");
 			for(;;) {
-				mdm_readline(console_buffer, CFG_CBSIZE);
+				mdm_readline(console_buffer, CONFIG_SYS_CBSIZE);
 				dbg("ini%d: [%s]", i, console_buffer);
 
 				if ((strcmp(console_buffer, "OK") == 0) ||
@@ -537,7 +523,7 @@ int mdm_init (void)
 	/* final stage - wait for connect */
 	for(;i > 1;) { /* if 'i' > 1 - wait for connection
 				  message from modem */
-		mdm_readline(console_buffer, CFG_CBSIZE);
+		mdm_readline(console_buffer, CONFIG_SYS_CBSIZE);
 		dbg("ini_f: [%s]", console_buffer);
 		if (strncmp(console_buffer, "CONNECT", 7) == 0) {
 			dbg("ini_f: connected");
diff --git a/lib_arm/bootm.c b/lib_arm/bootm.c
index 6c2f37e98..7dbde7df5 100644
--- a/lib_arm/bootm.c
+++ b/lib_arm/bootm.c
@@ -62,12 +62,14 @@ int do_bootm_linux(int flag, int argc, char *argv[], bootm_headers_t *images)
 	char	*s;
 	int	machid = bd->bi_arch_number;
 	void	(*theKernel)(int zero, int arch, uint params);
-	int	ret;
 
 #ifdef CONFIG_CMDLINE_TAG
 	char *commandline = getenv ("bootargs");
 #endif
 
+	if ((flag != 0) && (flag != BOOTM_STATE_OS_GO))
+		return 1;
+
 	theKernel = (void (*)(int, int, uint))images->ep;
 
 	s = getenv ("machid");
@@ -125,7 +127,7 @@ int do_bootm_linux(int flag, int argc, char *argv[], bootm_headers_t *images)
 
 	theKernel (0, machid, bd->bi_boot_params);
 	/* does not return */
-error:
+
 	return 1;
 }
 
diff --git a/lib_avr32/board.c b/lib_avr32/board.c
index 4ed6c9663..959375a48 100644
--- a/lib_avr32/board.c
+++ b/lib_avr32/board.c
@@ -23,6 +23,7 @@
 #include <command.h>
 #include <malloc.h>
 #include <devices.h>
+#include <timestamp.h>
 #include <version.h>
 #include <net.h>
 
@@ -36,7 +37,7 @@
 DECLARE_GLOBAL_DATA_PTR;
 
 const char version_string[] =
-	U_BOOT_VERSION " (" __DATE__ " - " __TIME__ ") " CONFIG_IDENT_STRING;
+	U_BOOT_VERSION " ("U_BOOT_DATE" - "U_BOOT_TIME") " CONFIG_IDENT_STRING;
 
 unsigned long monitor_flash_len;
 
@@ -60,9 +61,9 @@ static void mem_malloc_init(void)
 {
 	unsigned long monitor_addr;
 
-	monitor_addr = CFG_MONITOR_BASE + gd->reloc_off;
+	monitor_addr = CONFIG_SYS_MONITOR_BASE + gd->reloc_off;
 	mem_malloc_end = monitor_addr;
-	mem_malloc_start = mem_malloc_end - CFG_MALLOC_LEN;
+	mem_malloc_start = mem_malloc_end - CONFIG_SYS_MALLOC_LEN;
 	mem_malloc_brk = mem_malloc_start;
 
 	printf("malloc: Using memory from 0x%08lx to 0x%08lx\n",
@@ -84,7 +85,7 @@ void *sbrk(ptrdiff_t increment)
 	return ((void *)old);
 }
 
-#ifdef CFG_DMA_ALLOC_LEN
+#ifdef CONFIG_SYS_DMA_ALLOC_LEN
 #include <asm/cacheflush.h>
 #include <asm/io.h>
 
@@ -96,9 +97,9 @@ static void dma_alloc_init(void)
 {
 	unsigned long monitor_addr;
 
-	monitor_addr = CFG_MONITOR_BASE + gd->reloc_off;
-	dma_alloc_end = monitor_addr - CFG_MALLOC_LEN;
-	dma_alloc_start = dma_alloc_end - CFG_DMA_ALLOC_LEN;
+	monitor_addr = CONFIG_SYS_MONITOR_BASE + gd->reloc_off;
+	dma_alloc_end = monitor_addr - CONFIG_SYS_MALLOC_LEN;
+	dma_alloc_start = dma_alloc_end - CONFIG_SYS_DMA_ALLOC_LEN;
 	dma_alloc_brk = dma_alloc_start;
 
 	printf("DMA: Using memory from 0x%08lx to 0x%08lx\n",
@@ -115,8 +116,8 @@ void *dma_alloc_coherent(size_t len, unsigned long *handle)
 	if (dma_alloc_brk + len > dma_alloc_end)
 		return NULL;
 
-	dma_alloc_brk = ((paddr + len + CFG_DCACHE_LINESZ - 1)
-			 & ~(CFG_DCACHE_LINESZ - 1));
+	dma_alloc_brk = ((paddr + len + CONFIG_SYS_DCACHE_LINESZ - 1)
+			 & ~(CONFIG_SYS_DCACHE_LINESZ - 1));
 
 	*handle = paddr;
 	return uncached(paddr);
@@ -218,7 +219,7 @@ void board_init_f(ulong board_type)
 	 *  - global data struct
 	 *  - stack
 	 */
-	addr = CFG_SDRAM_BASE + sdram_size;
+	addr = CONFIG_SYS_SDRAM_BASE + sdram_size;
 	monitor_len = _end - _text;
 
 	/*
@@ -230,12 +231,12 @@ void board_init_f(ulong board_type)
 	monitor_addr = addr;
 
 	/* Reserve memory for malloc() */
-	addr -= CFG_MALLOC_LEN;
+	addr -= CONFIG_SYS_MALLOC_LEN;
 
-#ifdef CFG_DMA_ALLOC_LEN
+#ifdef CONFIG_SYS_DMA_ALLOC_LEN
 	/* Reserve DMA memory (must be cache aligned) */
-	addr &= ~(CFG_DCACHE_LINESZ - 1);
-	addr -= CFG_DMA_ALLOC_LEN;
+	addr &= ~(CONFIG_SYS_DCACHE_LINESZ - 1);
+	addr -= CONFIG_SYS_DMA_ALLOC_LEN;
 #endif
 
 	/* Allocate a Board Info struct on a word boundary */
@@ -258,7 +259,7 @@ void board_init_f(ulong board_type)
 	 * Initialize the board information struct with the
 	 * information we have.
 	 */
-	bd->bi_dram[0].start = CFG_SDRAM_BASE;
+	bd->bi_dram[0].start = CONFIG_SYS_SDRAM_BASE;
 	bd->bi_dram[0].size = sdram_size;
 	bd->bi_baudrate = gd->baudrate;
 
@@ -270,7 +271,7 @@ void board_init_f(ulong board_type)
 void board_init_r(gd_t *new_gd, ulong dest_addr)
 {
 	extern void malloc_bin_reloc (void);
-#ifndef CFG_ENV_IS_NOWHERE
+#ifndef CONFIG_ENV_IS_NOWHERE
 	extern char * env_name_spec;
 #endif
 	char *s;
@@ -281,7 +282,7 @@ void board_init_r(gd_t *new_gd, ulong dest_addr)
 	bd = gd->bd;
 
 	gd->flags |= GD_FLG_RELOC;
-	gd->reloc_off = dest_addr - CFG_MONITOR_BASE;
+	gd->reloc_off = dest_addr - CONFIG_SYS_MONITOR_BASE;
 
 	board_early_init_r();
 
@@ -304,7 +305,7 @@ void board_init_r(gd_t *new_gd, ulong dest_addr)
 			addr = (unsigned long)cmdtp->usage + gd->reloc_off;
 			cmdtp->usage = (typeof(cmdtp->usage))addr;
 		}
-#ifdef CFG_LONGHELP
+#ifdef CONFIG_SYS_LONGHELP
 		if (cmdtp->help) {
 			addr = (unsigned long)cmdtp->help + gd->reloc_off;
 			cmdtp->help = (typeof(cmdtp->help))addr;
@@ -313,7 +314,7 @@ void board_init_r(gd_t *new_gd, ulong dest_addr)
 	}
 
 	/* there are some other pointer constants we must deal with */
-#ifndef CFG_ENV_IS_NOWHERE
+#ifndef CONFIG_ENV_IS_NOWHERE
 	env_name_spec += gd->reloc_off;
 #endif
 
@@ -328,8 +329,8 @@ void board_init_r(gd_t *new_gd, ulong dest_addr)
 	bd->bi_flashsize = 0;
 	bd->bi_flashoffset = 0;
 
-#ifndef CFG_NO_FLASH
-	bd->bi_flashstart = CFG_FLASH_BASE;
+#ifndef CONFIG_SYS_NO_FLASH
+	bd->bi_flashstart = CONFIG_SYS_FLASH_BASE;
 	bd->bi_flashsize = flash_init();
 	bd->bi_flashoffset = (unsigned long)_edata - (unsigned long)_text;
 
@@ -340,7 +341,7 @@ void board_init_r(gd_t *new_gd, ulong dest_addr)
 	if (bd->bi_dram[0].size)
 		display_dram_config();
 
-	gd->bd->bi_boot_params = malloc(CFG_BOOTPARAMS_LEN);
+	gd->bd->bi_boot_params = malloc(CONFIG_SYS_BOOTPARAMS_LEN);
 	if (!gd->bd->bi_boot_params)
 		puts("WARNING: Cannot allocate space for boot parameters\n");
 
diff --git a/lib_avr32/bootm.c b/lib_avr32/bootm.c
index 8a6109de1..03ab8d1fa 100644
--- a/lib_avr32/bootm.c
+++ b/lib_avr32/bootm.c
@@ -176,7 +176,9 @@ int do_bootm_linux(int flag, int argc, char *argv[], bootm_headers_t *images)
 	void	(*theKernel)(int magic, void *tagtable);
 	struct	tag *params, *params_start;
 	char	*commandline = getenv("bootargs");
-	int	ret;
+
+	if ((flag != 0) && (flag != BOOTM_STATE_OS_GO))
+		return 1;
 
 	theKernel = (void *)images->ep;
 
@@ -202,6 +204,6 @@ int do_bootm_linux(int flag, int argc, char *argv[], bootm_headers_t *images)
 
 	theKernel(ATAG_MAGIC, params_start);
 	/* does not return */
-error:
+
 	return 1;
 }
diff --git a/lib_blackfin/board.c b/lib_blackfin/board.c
index 43d8be8e2..fde4bbe0f 100644
--- a/lib_blackfin/board.c
+++ b/lib_blackfin/board.c
@@ -16,6 +16,7 @@
 #include <i2c.h>
 #include <malloc.h>
 #include <net.h>
+#include <timestamp.h>
 #include <version.h>
 
 #include <asm/cplb.h>
@@ -32,7 +33,7 @@ int post_flag;
 
 DECLARE_GLOBAL_DATA_PTR;
 
-const char version_string[] = U_BOOT_VERSION " (" __DATE__ " - " __TIME__ ")";
+const char version_string[] = U_BOOT_VERSION " ("U_BOOT_DATE" - "U_BOOT_TIME")";
 
 __attribute__((always_inline))
 static inline void serial_early_puts(const char *s)
@@ -91,8 +92,8 @@ static void *mem_malloc_start, *mem_malloc_end, *mem_malloc_brk;
 
 static void mem_malloc_init(void)
 {
-	mem_malloc_start = (void *)CFG_MALLOC_BASE;
-	mem_malloc_end = (void *)(CFG_MALLOC_BASE + CFG_MALLOC_LEN);
+	mem_malloc_start = (void *)CONFIG_SYS_MALLOC_BASE;
+	mem_malloc_end = (void *)(CONFIG_SYS_MALLOC_BASE + CONFIG_SYS_MALLOC_LEN);
 	mem_malloc_brk = mem_malloc_start;
 	memset(mem_malloc_start, 0, mem_malloc_end - mem_malloc_start);
 }
@@ -192,16 +193,16 @@ void init_cplbtables(void)
 	dcplb_add(0xFF800000, L1_DMEMORY);
 	++i;
 
-	icplb_add(CFG_MONITOR_BASE & CPLB_PAGE_MASK, SDRAM_IKERNEL);
-	dcplb_add(CFG_MONITOR_BASE & CPLB_PAGE_MASK, SDRAM_DKERNEL);
+	icplb_add(CONFIG_SYS_MONITOR_BASE & CPLB_PAGE_MASK, SDRAM_IKERNEL);
+	dcplb_add(CONFIG_SYS_MONITOR_BASE & CPLB_PAGE_MASK, SDRAM_DKERNEL);
 	++i;
 
 	/* If the monitor crosses a 4 meg boundary, we'll need
 	 * to lock two entries for it.
 	 */
-	if ((CFG_MONITOR_BASE & CPLB_PAGE_MASK) != ((CFG_MONITOR_BASE + CFG_MONITOR_LEN) & CPLB_PAGE_MASK)) {
-		icplb_add((CFG_MONITOR_BASE + CFG_MONITOR_LEN) & CPLB_PAGE_MASK, SDRAM_IKERNEL);
-		dcplb_add((CFG_MONITOR_BASE + CFG_MONITOR_LEN) & CPLB_PAGE_MASK, SDRAM_DKERNEL);
+	if ((CONFIG_SYS_MONITOR_BASE & CPLB_PAGE_MASK) != ((CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN) & CPLB_PAGE_MASK)) {
+		icplb_add((CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN) & CPLB_PAGE_MASK, SDRAM_IKERNEL);
+		dcplb_add((CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN) & CPLB_PAGE_MASK, SDRAM_DKERNEL);
 		++i;
 	}
 
@@ -222,7 +223,7 @@ void init_cplbtables(void)
 	++i;
 #endif
 
-	while (i < 16 && extern_memory < (CFG_MONITOR_BASE & CPLB_PAGE_MASK)) {
+	while (i < 16 && extern_memory < (CONFIG_SYS_MONITOR_BASE & CPLB_PAGE_MASK)) {
 		icplb_add(extern_memory, SDRAM_IGENERIC);
 		dcplb_add(extern_memory, SDRAM_DGENERIC);
 		extern_memory += CPLB_PAGE_SIZE;
@@ -250,7 +251,6 @@ void init_cplbtables(void)
 
 extern int exception_init(void);
 extern int irq_init(void);
-extern int rtc_init(void);
 extern int timer_init(void);
 
 void board_init_f(ulong bootflag)
@@ -279,11 +279,11 @@ void board_init_f(ulong bootflag)
 #endif
 
 	serial_early_puts("Init global data\n");
-	gd = (gd_t *) (CFG_GBL_DATA_ADDR);
+	gd = (gd_t *) (CONFIG_SYS_GBL_DATA_ADDR);
 	memset((void *)gd, 0, sizeof(gd_t));
 
 	/* Board data initialization */
-	addr = (CFG_GBL_DATA_ADDR + sizeof(gd_t));
+	addr = (CONFIG_SYS_GBL_DATA_ADDR + sizeof(gd_t));
 
 	/* Align to 4 byte boundary */
 	addr &= ~(4 - 1);
@@ -313,9 +313,6 @@ void board_init_f(ulong bootflag)
 	display_banner();
 
 	checkboard();
-#if defined(CONFIG_RTC_BFIN) && defined(CONFIG_CMD_DATE)
-	rtc_init();
-#endif
 	timer_init();
 
 	printf("Clock: VCO: %lu MHz, Core: %lu MHz, System: %lu MHz\n",
@@ -336,7 +333,7 @@ void board_init_f(ulong bootflag)
 static int init_func_i2c(void)
 {
 	puts("I2C:   ");
-	i2c_init(CFG_I2C_SPEED, CFG_I2C_SLAVE);
+	i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
 	puts("ready\n");
 	return (0);
 }
@@ -356,16 +353,16 @@ void board_init_r(gd_t * id, ulong dest_addr)
 	post_reloc();
 #endif
 
-#if	!defined(CFG_NO_FLASH)
+#if	!defined(CONFIG_SYS_NO_FLASH)
 	/* There are some other pointer constants we must deal with */
 	/* configure available FLASH banks */
 	extern flash_info_t flash_info[];
 	ulong size = flash_init();
 	puts("Flash: ");
 	print_size(size, "\n");
-	flash_protect(FLAG_PROTECT_SET, CFG_FLASH_BASE,
-		      CFG_FLASH_BASE + 0x1ffff, &flash_info[0]);
-	bd->bi_flashstart = CFG_FLASH_BASE;
+	flash_protect(FLAG_PROTECT_SET, CONFIG_SYS_FLASH_BASE,
+		      CONFIG_SYS_FLASH_BASE + 0x1ffff, &flash_info[0]);
+	bd->bi_flashstart = CONFIG_SYS_FLASH_BASE;
 	bd->bi_flashsize = size;
 	bd->bi_flashoffset = 0;
 #else
@@ -378,12 +375,17 @@ void board_init_r(gd_t * id, ulong dest_addr)
 	malloc_bin_reloc();
 
 #ifdef CONFIG_SPI
-# if ! defined(CFG_ENV_IS_IN_EEPROM)
+# if ! defined(CONFIG_ENV_IS_IN_EEPROM)
 	spi_init_f();
 # endif
 	spi_init_r();
 #endif
 
+#ifdef CONFIG_CMD_NAND
+	puts("NAND:  ");
+	nand_init();		/* go init the NAND */
+#endif
+
 	/* relocate environment function pointers etc. */
 	env_relocate();
 
@@ -431,11 +433,6 @@ void board_init_r(gd_t * id, ulong dest_addr)
 		copy_filename(BootFile, s, sizeof(BootFile));
 #endif
 
-#ifdef CONFIG_CMD_NAND
-	puts("NAND:  ");
-	nand_init();		/* go init the NAND */
-#endif
-
 #if defined(CONFIG_MISC_INIT_R)
 	/* miscellaneous platform dependent initialisations */
 	misc_init_r();
diff --git a/lib_blackfin/bootm.c b/lib_blackfin/bootm.c
index d0afb21eb..195eb9c00 100644
--- a/lib_blackfin/bootm.c
+++ b/lib_blackfin/bootm.c
@@ -36,6 +36,9 @@ int do_bootm_linux(int flag, int argc, char *argv[], bootm_headers_t *images)
 	int	(*appl) (char *cmdline);
 	char	*cmdline;
 
+	if ((flag != 0) && (flag != BOOTM_STATE_OS_GO))
+		return 1;
+
 #ifdef SHARED_RESOURCES
 	swap_to(FLASH);
 #endif
@@ -48,6 +51,6 @@ int do_bootm_linux(int flag, int argc, char *argv[], bootm_headers_t *images)
 	dcache_disable();
 	(*appl) (cmdline);
 	/* does not return */
-error:
+
 	return 1;
 }
diff --git a/lib_blackfin/cache.c b/lib_blackfin/cache.c
index c2f6e2848..870c5bfba 100644
--- a/lib_blackfin/cache.c
+++ b/lib_blackfin/cache.c
@@ -11,6 +11,7 @@
 
 #include <common.h>
 #include <asm/blackfin.h>
+#include <asm/mach-common/bits/mpu.h>
 
 void flush_cache(unsigned long addr, unsigned long size)
 {
@@ -24,3 +25,37 @@ void flush_cache(unsigned long addr, unsigned long size)
 	if (dcache_status())
 		blackfin_dcache_flush_range((void *)addr, (void *)(addr + size));
 }
+
+void icache_enable(void)
+{
+	bfin_write_IMEM_CONTROL(IMC | ENICPLB);
+	SSYNC();
+}
+
+void icache_disable(void)
+{
+	bfin_write_IMEM_CONTROL(0);
+	SSYNC();
+}
+
+int icache_status(void)
+{
+	return bfin_read_IMEM_CONTROL() & IMC;
+}
+
+void dcache_enable(void)
+{
+	bfin_write_DMEM_CONTROL(ACACHE_BCACHE | ENDCPLB | PORT_PREF0);
+	SSYNC();
+}
+
+void dcache_disable(void)
+{
+	bfin_write_DMEM_CONTROL(0);
+	SSYNC();
+}
+
+int dcache_status(void)
+{
+	return bfin_read_DMEM_CONTROL() & ACACHE_BCACHE;
+}
diff --git a/lib_blackfin/post.c b/lib_blackfin/post.c
index 3c4d5c51d..4ab9e8bf0 100644
--- a/lib_blackfin/post.c
+++ b/lib_blackfin/post.c
@@ -345,7 +345,7 @@ int post_log(char *format, ...)
 {
 	va_list args;
 	uint i;
-	char printbuffer[CFG_PBSIZE];
+	char printbuffer[CONFIG_SYS_PBSIZE];
 
 	va_start(args, format);
 
@@ -419,7 +419,7 @@ void post_reloc(void)
  */
 unsigned long post_time_ms(unsigned long base)
 {
-	return (unsigned long)get_ticks() / (get_tbclk() / CFG_HZ) - base;
+	return (unsigned long)get_ticks() / (get_tbclk() / CONFIG_SYS_HZ) - base;
 }
 
 #endif				/* CONFIG_POST */
diff --git a/lib_blackfin/tests.c b/lib_blackfin/tests.c
index 051649d23..c2319ecb7 100644
--- a/lib_blackfin/tests.c
+++ b/lib_blackfin/tests.c
@@ -21,7 +21,7 @@
  * MA 02111-1307 USA
  *
  * Be sure to mark tests to be run before relocation as such with the
- * CFG_POST_PREREL flag so that logging is done correctly if the
+ * CONFIG_SYS_POST_PREREL flag so that logging is done correctly if the
  * logbuffer support is enabled.
  */
 
@@ -30,9 +30,9 @@
 #ifdef CONFIG_POST
 
 #include <post.h>
-#define CFG_POST_FLASH  0x00004000
-#define CFG_POST_LED    0x00008000
-#define CFG_POST_BUTTON 0x00010000
+#define CONFIG_SYS_POST_FLASH  0x00004000
+#define CONFIG_SYS_POST_LED    0x00008000
+#define CONFIG_SYS_POST_BUTTON 0x00010000
 
 extern int cache_post_test(int flags);
 extern int watchdog_post_test(int flags);
@@ -58,7 +58,7 @@ extern int led_post_test(int flags);
 extern int button_post_test(int flags);
 
 struct post_test post_list[] = {
-#if CONFIG_POST & CFG_POST_CACHE
+#if CONFIG_POST & CONFIG_SYS_POST_CACHE
 	{
 	 "Cache test",
 	 "cache",
@@ -67,9 +67,9 @@ struct post_test post_list[] = {
 	 &cache_post_test,
 	 NULL,
 	 NULL,
-	 CFG_POST_CACHE},
+	 CONFIG_SYS_POST_CACHE},
 #endif
-#if CONFIG_POST & CFG_POST_WATCHDOG
+#if CONFIG_POST & CONFIG_SYS_POST_WATCHDOG
 	{
 	 "Watchdog timer test",
 	 "watchdog",
@@ -78,9 +78,9 @@ struct post_test post_list[] = {
 	 &watchdog_post_test,
 	 NULL,
 	 NULL,
-	 CFG_POST_WATCHDOG},
+	 CONFIG_SYS_POST_WATCHDOG},
 #endif
-#if CONFIG_POST & CFG_POST_I2C
+#if CONFIG_POST & CONFIG_SYS_POST_I2C
 	{
 	 "I2C test",
 	 "i2c",
@@ -89,9 +89,9 @@ struct post_test post_list[] = {
 	 &i2c_post_test,
 	 NULL,
 	 NULL,
-	 CFG_POST_I2C},
+	 CONFIG_SYS_POST_I2C},
 #endif
-#if CONFIG_POST & CFG_POST_RTC
+#if CONFIG_POST & CONFIG_SYS_POST_RTC
 	{
 	 "RTC test",
 	 "rtc",
@@ -100,9 +100,9 @@ struct post_test post_list[] = {
 	 &rtc_post_test,
 	 NULL,
 	 NULL,
-	 CFG_POST_RTC},
+	 CONFIG_SYS_POST_RTC},
 #endif
-#if CONFIG_POST & CFG_POST_MEMORY
+#if CONFIG_POST & CONFIG_SYS_POST_MEMORY
 	{
 	 "Memory test",
 	 "memory",
@@ -111,9 +111,9 @@ struct post_test post_list[] = {
 	 &memory_post_test,
 	 NULL,
 	 NULL,
-	 CFG_POST_MEMORY},
+	 CONFIG_SYS_POST_MEMORY},
 #endif
-#if CONFIG_POST & CFG_POST_CPU
+#if CONFIG_POST & CONFIG_SYS_POST_CPU
 	{
 	 "CPU test",
 	 "cpu",
@@ -122,9 +122,9 @@ struct post_test post_list[] = {
 	 &cpu_post_test,
 	 NULL,
 	 NULL,
-	 CFG_POST_CPU},
+	 CONFIG_SYS_POST_CPU},
 #endif
-#if CONFIG_POST & CFG_POST_UART
+#if CONFIG_POST & CONFIG_SYS_POST_UART
 	{
 	 "UART test",
 	 "uart",
@@ -133,9 +133,9 @@ struct post_test post_list[] = {
 	 &uart_post_test,
 	 NULL,
 	 NULL,
-	 CFG_POST_UART},
+	 CONFIG_SYS_POST_UART},
 #endif
-#if CONFIG_POST & CFG_POST_ETHER
+#if CONFIG_POST & CONFIG_SYS_POST_ETHER
 	{
 	 "ETHERNET test",
 	 "ethernet",
@@ -144,9 +144,9 @@ struct post_test post_list[] = {
 	 &ether_post_test,
 	 NULL,
 	 NULL,
-	 CFG_POST_ETHER},
+	 CONFIG_SYS_POST_ETHER},
 #endif
-#if CONFIG_POST & CFG_POST_SPI
+#if CONFIG_POST & CONFIG_SYS_POST_SPI
 	{
 	 "SPI test",
 	 "spi",
@@ -155,9 +155,9 @@ struct post_test post_list[] = {
 	 &spi_post_test,
 	 NULL,
 	 NULL,
-	 CFG_POST_SPI},
+	 CONFIG_SYS_POST_SPI},
 #endif
-#if CONFIG_POST & CFG_POST_USB
+#if CONFIG_POST & CONFIG_SYS_POST_USB
 	{
 	 "USB test",
 	 "usb",
@@ -166,9 +166,9 @@ struct post_test post_list[] = {
 	 &usb_post_test,
 	 NULL,
 	 NULL,
-	 CFG_POST_USB},
+	 CONFIG_SYS_POST_USB},
 #endif
-#if CONFIG_POST & CFG_POST_SPR
+#if CONFIG_POST & CONFIG_SYS_POST_SPR
 	{
 	 "SPR test",
 	 "spr",
@@ -177,9 +177,9 @@ struct post_test post_list[] = {
 	 &spr_post_test,
 	 NULL,
 	 NULL,
-	 CFG_POST_SPR},
+	 CONFIG_SYS_POST_SPR},
 #endif
-#if CONFIG_POST & CFG_POST_SYSMON
+#if CONFIG_POST & CONFIG_SYS_POST_SYSMON
 	{
 	 "SYSMON test",
 	 "sysmon",
@@ -188,9 +188,9 @@ struct post_test post_list[] = {
 	 &sysmon_post_test,
 	 &sysmon_init_f,
 	 &sysmon_reloc,
-	 CFG_POST_SYSMON},
+	 CONFIG_SYS_POST_SYSMON},
 #endif
-#if CONFIG_POST & CFG_POST_DSP
+#if CONFIG_POST & CONFIG_SYS_POST_DSP
 	{
 	 "DSP test",
 	 "dsp",
@@ -199,9 +199,9 @@ struct post_test post_list[] = {
 	 &dsp_post_test,
 	 NULL,
 	 NULL,
-	 CFG_POST_DSP},
+	 CONFIG_SYS_POST_DSP},
 #endif
-#if CONFIG_POST & CFG_POST_CODEC
+#if CONFIG_POST & CONFIG_SYS_POST_CODEC
 	{
 	 "CODEC test",
 	 "codec",
@@ -210,9 +210,9 @@ struct post_test post_list[] = {
 	 &codec_post_test,
 	 NULL,
 	 NULL,
-	 CFG_POST_CODEC},
+	 CONFIG_SYS_POST_CODEC},
 #endif
-#if CONFIG_POST & CFG_POST_FLASH
+#if CONFIG_POST & CONFIG_SYS_POST_FLASH
 	{
 	 "FLASH test",
 	 "flash",
@@ -221,9 +221,9 @@ struct post_test post_list[] = {
 	 &flash_post_test,
 	 NULL,
 	 NULL,
-	 CFG_POST_FLASH},
+	 CONFIG_SYS_POST_FLASH},
 #endif
-#if CONFIG_POST & CFG_POST_LED
+#if CONFIG_POST & CONFIG_SYS_POST_LED
 	{
 	 "LED test",
 	 "LED",
@@ -232,9 +232,9 @@ struct post_test post_list[] = {
 	 &led_post_test,
 	 NULL,
 	 NULL,
-	 CFG_POST_LED},
+	 CONFIG_SYS_POST_LED},
 #endif
-#if CONFIG_POST & CFG_POST_BUTTON
+#if CONFIG_POST & CONFIG_SYS_POST_BUTTON
 	{
 	 "Button test",
 	 "button",
@@ -243,7 +243,7 @@ struct post_test post_list[] = {
 	 &button_post_test,
 	 NULL,
 	 NULL,
-	 CFG_POST_BUTTON},
+	 CONFIG_SYS_POST_BUTTON},
 #endif
 
 };
diff --git a/lib_generic/Makefile b/lib_generic/Makefile
index 7df5a2c34..3f040226e 100644
--- a/lib_generic/Makefile
+++ b/lib_generic/Makefile
@@ -25,6 +25,7 @@ include $(TOPDIR)/config.mk
 
 LIB	= $(obj)libgeneric.a
 
+COBJS-$(CONFIG_ADDR_MAP) += addr_map.o
 COBJS-y += bzlib.o
 COBJS-y += bzlib_crctable.o
 COBJS-y += bzlib_decompress.o
@@ -45,6 +46,7 @@ COBJS-y += string.o
 COBJS-y	+= strmhz.o
 COBJS-y += vsprintf.o
 COBJS-y += zlib.o
+COBJS-$(CONFIG_RBTREE)	+= rbtree.o
 
 COBJS	:= $(COBJS-y)
 SRCS	:= $(COBJS:.o=.c)
diff --git a/lib_generic/addr_map.c b/lib_generic/addr_map.c
new file mode 100644
index 000000000..ff8532cf1
--- /dev/null
+++ b/lib_generic/addr_map.c
@@ -0,0 +1,81 @@
+/*
+ * Copyright 2008 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * Version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <addr_map.h>
+
+static struct {
+	phys_addr_t paddr;
+	phys_size_t size;
+	unsigned long vaddr;
+} address_map[CONFIG_SYS_NUM_ADDR_MAP];
+
+phys_addr_t addrmap_virt_to_phys(void * vaddr)
+{
+	int i;
+
+	for (i = 0; i < CONFIG_SYS_NUM_ADDR_MAP; i++) {
+		u64 base, upper, addr;
+
+		if (address_map[i].size == 0)
+			continue;
+
+		addr = (u64)((u32)vaddr);
+		base = (u64)(address_map[i].vaddr);
+		upper = (u64)(address_map[i].size) + base - 1;
+
+		if (addr >= base && addr <= upper) {
+			return addr - address_map[i].vaddr + address_map[i].paddr;
+		}
+	}
+
+	return (phys_addr_t)(~0);
+}
+
+unsigned long addrmap_phys_to_virt(phys_addr_t paddr)
+{
+	int i;
+
+	for (i = 0; i < CONFIG_SYS_NUM_ADDR_MAP; i++) {
+		u64 base, upper, addr;
+
+		if (address_map[i].size == 0)
+			continue;
+
+		addr = (u64)paddr;
+		base = (u64)(address_map[i].paddr);
+		upper = (u64)(address_map[i].size) + base - 1;
+
+		if (addr >= base && addr <= upper) {
+			return paddr - address_map[i].paddr + address_map[i].vaddr;
+		}
+	}
+
+	return (unsigned long)(~0);
+}
+
+void addrmap_set_entry(unsigned long vaddr, phys_addr_t paddr,
+			phys_size_t size, int idx)
+{
+	if (idx > CONFIG_SYS_NUM_ADDR_MAP)
+		return;
+
+	address_map[idx].vaddr = vaddr;
+	address_map[idx].paddr = paddr;
+	address_map[idx].size  = size;
+}
diff --git a/lib_generic/lzma/LGPL.txt b/lib_generic/lzma/LGPL.txt
new file mode 100644
index 000000000..9e76f5b85
--- /dev/null
+++ b/lib_generic/lzma/LGPL.txt
@@ -0,0 +1,502 @@
+      GNU LESSER GENERAL PUBLIC LICENSE
+	   Version 2.1, February 1999
+
+ Copyright (C) 1991, 1999 Free Software Foundation, Inc.
+     59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ Everyone is permitted to copy and distribute verbatim copies
+ of this license document, but changing it is not allowed.
+
+[This is the first released version of the Lesser GPL.	It also counts
+ as the successor of the GNU Library Public License, version 2, hence
+ the version number 2.1.]
+
+	  Preamble
+
+  The licenses for most software are designed to take away your
+freedom to share and change it.  By contrast, the GNU General Public
+Licenses are intended to guarantee your freedom to share and change
+free software--to make sure the software is free for all its users.
+
+  This license, the Lesser General Public License, applies to some
+specially designated software packages--typically libraries--of the
+Free Software Foundation and other authors who decide to use it.  You
+can use it too, but we suggest you first think carefully about whether
+this license or the ordinary General Public License is the better
+strategy to use in any particular case, based on the explanations below.
+
+  When we speak of free software, we are referring to freedom of use,
+not price.  Our General Public Licenses are designed to make sure that
+you have the freedom to distribute copies of free software (and charge
+for this service if you wish); that you receive source code or can get
+it if you want it; that you can change the software and use pieces of
+it in new free programs; and that you are informed that you can do
+these things.
+
+  To protect your rights, we need to make restrictions that forbid
+distributors to deny you these rights or to ask you to surrender these
+rights.  These restrictions translate to certain responsibilities for
+you if you distribute copies of the library or if you modify it.
+
+  For example, if you distribute copies of the library, whether gratis
+or for a fee, you must give the recipients all the rights that we gave
+you.  You must make sure that they, too, receive or can get the source
+code.  If you link other code with the library, you must provide
+complete object files to the recipients, so that they can relink them
+with the library after making changes to the library and recompiling
+it.  And you must show them these terms so they know their rights.
+
+  We protect your rights with a two-step method: (1) we copyright the
+library, and (2) we offer you this license, which gives you legal
+permission to copy, distribute and/or modify the library.
+
+  To protect each distributor, we want to make it very clear that
+there is no warranty for the free library.  Also, if the library is
+modified by someone else and passed on, the recipients should know
+that what they have is not the original version, so that the original
+author's reputation will not be affected by problems that might be
+introduced by others.
+
+  Finally, software patents pose a constant threat to the existence of
+any free program.  We wish to make sure that a company cannot
+effectively restrict the users of a free program by obtaining a
+restrictive license from a patent holder.  Therefore, we insist that
+any patent license obtained for a version of the library must be
+consistent with the full freedom of use specified in this license.
+
+  Most GNU software, including some libraries, is covered by the
+ordinary GNU General Public License.  This license, the GNU Lesser
+General Public License, applies to certain designated libraries, and
+is quite different from the ordinary General Public License.  We use
+this license for certain libraries in order to permit linking those
+libraries into non-free programs.
+
+  When a program is linked with a library, whether statically or using
+a shared library, the combination of the two is legally speaking a
+combined work, a derivative of the original library.  The ordinary
+General Public License therefore permits such linking only if the
+entire combination fits its criteria of freedom.  The Lesser General
+Public License permits more lax criteria for linking other code with
+the library.
+
+  We call this license the "Lesser" General Public License because it
+does Less to protect the user's freedom than the ordinary General
+Public License.  It also provides other free software developers Less
+of an advantage over competing non-free programs.  These disadvantages
+are the reason we use the ordinary General Public License for many
+libraries.  However, the Lesser license provides advantages in certain
+special circumstances.
+
+  For example, on rare occasions, there may be a special need to
+encourage the widest possible use of a certain library, so that it becomes
+a de-facto standard.  To achieve this, non-free programs must be
+allowed to use the library.  A more frequent case is that a free
+library does the same job as widely used non-free libraries.  In this
+case, there is little to gain by limiting the free library to free
+software only, so we use the Lesser General Public License.
+
+  In other cases, permission to use a particular library in non-free
+programs enables a greater number of people to use a large body of
+free software.	For example, permission to use the GNU C Library in
+non-free programs enables many more people to use the whole GNU
+operating system, as well as its variant, the GNU/Linux operating
+system.
+
+  Although the Lesser General Public License is Less protective of the
+users' freedom, it does ensure that the user of a program that is
+linked with the Library has the freedom and the wherewithal to run
+that program using a modified version of the Library.
+
+  The precise terms and conditions for copying, distribution and
+modification follow.  Pay close attention to the difference between a
+"work based on the library" and a "work that uses the library".  The
+former contains code derived from the library, whereas the latter must
+be combined with the library in order to run.
+
+      GNU LESSER GENERAL PUBLIC LICENSE
+   TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
+
+  0. This License Agreement applies to any software library or other
+program which contains a notice placed by the copyright holder or
+other authorized party saying it may be distributed under the terms of
+this Lesser General Public License (also called "this License").
+Each licensee is addressed as "you".
+
+  A "library" means a collection of software functions and/or data
+prepared so as to be conveniently linked with application programs
+(which use some of those functions and data) to form executables.
+
+  The "Library", below, refers to any such software library or work
+which has been distributed under these terms.  A "work based on the
+Library" means either the Library or any derivative work under
+copyright law: that is to say, a work containing the Library or a
+portion of it, either verbatim or with modifications and/or translated
+straightforwardly into another language.  (Hereinafter, translation is
+included without limitation in the term "modification".)
+
+  "Source code" for a work means the preferred form of the work for
+making modifications to it.  For a library, complete source code means
+all the source code for all modules it contains, plus any associated
+interface definition files, plus the scripts used to control compilation
+and installation of the library.
+
+  Activities other than copying, distribution and modification are not
+covered by this License; they are outside its scope.  The act of
+running a program using the Library is not restricted, and output from
+such a program is covered only if its contents constitute a work based
+on the Library (independent of the use of the Library in a tool for
+writing it).  Whether that is true depends on what the Library does
+and what the program that uses the Library does.
+
+  1. You may copy and distribute verbatim copies of the Library's
+complete source code as you receive it, in any medium, provided that
+you conspicuously and appropriately publish on each copy an
+appropriate copyright notice and disclaimer of warranty; keep intact
+all the notices that refer to this License and to the absence of any
+warranty; and distribute a copy of this License along with the
+Library.
+
+  You may charge a fee for the physical act of transferring a copy,
+and you may at your option offer warranty protection in exchange for a
+fee.
+
+  2. You may modify your copy or copies of the Library or any portion
+of it, thus forming a work based on the Library, and copy and
+distribute such modifications or work under the terms of Section 1
+above, provided that you also meet all of these conditions:
+
+    a) The modified work must itself be a software library.
+
+    b) You must cause the files modified to carry prominent notices
+    stating that you changed the files and the date of any change.
+
+    c) You must cause the whole of the work to be licensed at no
+    charge to all third parties under the terms of this License.
+
+    d) If a facility in the modified Library refers to a function or a
+    table of data to be supplied by an application program that uses
+    the facility, other than as an argument passed when the facility
+    is invoked, then you must make a good faith effort to ensure that,
+    in the event an application does not supply such function or
+    table, the facility still operates, and performs whatever part of
+    its purpose remains meaningful.
+
+    (For example, a function in a library to compute square roots has
+    a purpose that is entirely well-defined independent of the
+    application.  Therefore, Subsection 2d requires that any
+    application-supplied function or table used by this function must
+    be optional: if the application does not supply it, the square
+    root function must still compute square roots.)
+
+These requirements apply to the modified work as a whole.  If
+identifiable sections of that work are not derived from the Library,
+and can be reasonably considered independent and separate works in
+themselves, then this License, and its terms, do not apply to those
+sections when you distribute them as separate works.  But when you
+distribute the same sections as part of a whole which is a work based
+on the Library, the distribution of the whole must be on the terms of
+this License, whose permissions for other licensees extend to the
+entire whole, and thus to each and every part regardless of who wrote
+it.
+
+Thus, it is not the intent of this section to claim rights or contest
+your rights to work written entirely by you; rather, the intent is to
+exercise the right to control the distribution of derivative or
+collective works based on the Library.
+
+In addition, mere aggregation of another work not based on the Library
+with the Library (or with a work based on the Library) on a volume of
+a storage or distribution medium does not bring the other work under
+the scope of this License.
+
+  3. You may opt to apply the terms of the ordinary GNU General Public
+License instead of this License to a given copy of the Library.  To do
+this, you must alter all the notices that refer to this License, so
+that they refer to the ordinary GNU General Public License, version 2,
+instead of to this License.  (If a newer version than version 2 of the
+ordinary GNU General Public License has appeared, then you can specify
+that version instead if you wish.)  Do not make any other change in
+these notices.
+
+  Once this change is made in a given copy, it is irreversible for
+that copy, so the ordinary GNU General Public License applies to all
+subsequent copies and derivative works made from that copy.
+
+  This option is useful when you wish to copy part of the code of
+the Library into a program that is not a library.
+
+  4. You may copy and distribute the Library (or a portion or
+derivative of it, under Section 2) in object code or executable form
+under the terms of Sections 1 and 2 above provided that you accompany
+it with the complete corresponding machine-readable source code, which
+must be distributed under the terms of Sections 1 and 2 above on a
+medium customarily used for software interchange.
+
+  If distribution of object code is made by offering access to copy
+from a designated place, then offering equivalent access to copy the
+source code from the same place satisfies the requirement to
+distribute the source code, even though third parties are not
+compelled to copy the source along with the object code.
+
+  5. A program that contains no derivative of any portion of the
+Library, but is designed to work with the Library by being compiled or
+linked with it, is called a "work that uses the Library".  Such a
+work, in isolation, is not a derivative work of the Library, and
+therefore falls outside the scope of this License.
+
+  However, linking a "work that uses the Library" with the Library
+creates an executable that is a derivative of the Library (because it
+contains portions of the Library), rather than a "work that uses the
+library".  The executable is therefore covered by this License.
+Section 6 states terms for distribution of such executables.
+
+  When a "work that uses the Library" uses material from a header file
+that is part of the Library, the object code for the work may be a
+derivative work of the Library even though the source code is not.
+Whether this is true is especially significant if the work can be
+linked without the Library, or if the work is itself a library.  The
+threshold for this to be true is not precisely defined by law.
+
+  If such an object file uses only numerical parameters, data
+structure layouts and accessors, and small macros and small inline
+functions (ten lines or less in length), then the use of the object
+file is unrestricted, regardless of whether it is legally a derivative
+work.  (Executables containing this object code plus portions of the
+Library will still fall under Section 6.)
+
+  Otherwise, if the work is a derivative of the Library, you may
+distribute the object code for the work under the terms of Section 6.
+Any executables containing that work also fall under Section 6,
+whether or not they are linked directly with the Library itself.
+
+  6. As an exception to the Sections above, you may also combine or
+link a "work that uses the Library" with the Library to produce a
+work containing portions of the Library, and distribute that work
+under terms of your choice, provided that the terms permit
+modification of the work for the customer's own use and reverse
+engineering for debugging such modifications.
+
+  You must give prominent notice with each copy of the work that the
+Library is used in it and that the Library and its use are covered by
+this License.  You must supply a copy of this License.	If the work
+during execution displays copyright notices, you must include the
+copyright notice for the Library among them, as well as a reference
+directing the user to the copy of this License.  Also, you must do one
+of these things:
+
+    a) Accompany the work with the complete corresponding
+    machine-readable source code for the Library including whatever
+    changes were used in the work (which must be distributed under
+    Sections 1 and 2 above); and, if the work is an executable linked
+    with the Library, with the complete machine-readable "work that
+    uses the Library", as object code and/or source code, so that the
+    user can modify the Library and then relink to produce a modified
+    executable containing the modified Library.  (It is understood
+    that the user who changes the contents of definitions files in the
+    Library will not necessarily be able to recompile the application
+    to use the modified definitions.)
+
+    b) Use a suitable shared library mechanism for linking with the
+    Library.  A suitable mechanism is one that (1) uses at run time a
+    copy of the library already present on the user's computer system,
+    rather than copying library functions into the executable, and (2)
+    will operate properly with a modified version of the library, if
+    the user installs one, as long as the modified version is
+    interface-compatible with the version that the work was made with.
+
+    c) Accompany the work with a written offer, valid for at
+    least three years, to give the same user the materials
+    specified in Subsection 6a, above, for a charge no more
+    than the cost of performing this distribution.
+
+    d) If distribution of the work is made by offering access to copy
+    from a designated place, offer equivalent access to copy the above
+    specified materials from the same place.
+
+    e) Verify that the user has already received a copy of these
+    materials or that you have already sent this user a copy.
+
+  For an executable, the required form of the "work that uses the
+Library" must include any data and utility programs needed for
+reproducing the executable from it.  However, as a special exception,
+the materials to be distributed need not include anything that is
+normally distributed (in either source or binary form) with the major
+components (compiler, kernel, and so on) of the operating system on
+which the executable runs, unless that component itself accompanies
+the executable.
+
+  It may happen that this requirement contradicts the license
+restrictions of other proprietary libraries that do not normally
+accompany the operating system.  Such a contradiction means you cannot
+use both them and the Library together in an executable that you
+distribute.
+
+  7. You may place library facilities that are a work based on the
+Library side-by-side in a single library together with other library
+facilities not covered by this License, and distribute such a combined
+library, provided that the separate distribution of the work based on
+the Library and of the other library facilities is otherwise
+permitted, and provided that you do these two things:
+
+    a) Accompany the combined library with a copy of the same work
+    based on the Library, uncombined with any other library
+    facilities.  This must be distributed under the terms of the
+    Sections above.
+
+    b) Give prominent notice with the combined library of the fact
+    that part of it is a work based on the Library, and explaining
+    where to find the accompanying uncombined form of the same work.
+
+  8. You may not copy, modify, sublicense, link with, or distribute
+the Library except as expressly provided under this License.  Any
+attempt otherwise to copy, modify, sublicense, link with, or
+distribute the Library is void, and will automatically terminate your
+rights under this License.  However, parties who have received copies,
+or rights, from you under this License will not have their licenses
+terminated so long as such parties remain in full compliance.
+
+  9. You are not required to accept this License, since you have not
+signed it.  However, nothing else grants you permission to modify or
+distribute the Library or its derivative works.  These actions are
+prohibited by law if you do not accept this License.  Therefore, by
+modifying or distributing the Library (or any work based on the
+Library), you indicate your acceptance of this License to do so, and
+all its terms and conditions for copying, distributing or modifying
+the Library or works based on it.
+
+  10. Each time you redistribute the Library (or any work based on the
+Library), the recipient automatically receives a license from the
+original licensor to copy, distribute, link with or modify the Library
+subject to these terms and conditions.	You may not impose any further
+restrictions on the recipients' exercise of the rights granted herein.
+You are not responsible for enforcing compliance by third parties with
+this License.
+
+  11. If, as a consequence of a court judgment or allegation of patent
+infringement or for any other reason (not limited to patent issues),
+conditions are imposed on you (whether by court order, agreement or
+otherwise) that contradict the conditions of this License, they do not
+excuse you from the conditions of this License.  If you cannot
+distribute so as to satisfy simultaneously your obligations under this
+License and any other pertinent obligations, then as a consequence you
+may not distribute the Library at all.	For example, if a patent
+license would not permit royalty-free redistribution of the Library by
+all those who receive copies directly or indirectly through you, then
+the only way you could satisfy both it and this License would be to
+refrain entirely from distribution of the Library.
+
+If any portion of this section is held invalid or unenforceable under any
+particular circumstance, the balance of the section is intended to apply,
+and the section as a whole is intended to apply in other circumstances.
+
+It is not the purpose of this section to induce you to infringe any
+patents or other property right claims or to contest validity of any
+such claims; this section has the sole purpose of protecting the
+integrity of the free software distribution system which is
+implemented by public license practices.  Many people have made
+generous contributions to the wide range of software distributed
+through that system in reliance on consistent application of that
+system; it is up to the author/donor to decide if he or she is willing
+to distribute software through any other system and a licensee cannot
+impose that choice.
+
+This section is intended to make thoroughly clear what is believed to
+be a consequence of the rest of this License.
+
+  12. If the distribution and/or use of the Library is restricted in
+certain countries either by patents or by copyrighted interfaces, the
+original copyright holder who places the Library under this License may add
+an explicit geographical distribution limitation excluding those countries,
+so that distribution is permitted only in or among countries not thus
+excluded.  In such case, this License incorporates the limitation as if
+written in the body of this License.
+
+  13. The Free Software Foundation may publish revised and/or new
+versions of the Lesser General Public License from time to time.
+Such new versions will be similar in spirit to the present version,
+but may differ in detail to address new problems or concerns.
+
+Each version is given a distinguishing version number.	If the Library
+specifies a version number of this License which applies to it and
+"any later version", you have the option of following the terms and
+conditions either of that version or of any later version published by
+the Free Software Foundation.  If the Library does not specify a
+license version number, you may choose any version ever published by
+the Free Software Foundation.
+
+  14. If you wish to incorporate parts of the Library into other free
+programs whose distribution conditions are incompatible with these,
+write to the author to ask for permission.  For software which is
+copyrighted by the Free Software Foundation, write to the Free
+Software Foundation; we sometimes make exceptions for this.  Our
+decision will be guided by the two goals of preserving the free status
+of all derivatives of our free software and of promoting the sharing
+and reuse of software generally.
+
+	  NO WARRANTY
+
+  15. BECAUSE THE LIBRARY IS LICENSED FREE OF CHARGE, THERE IS NO
+WARRANTY FOR THE LIBRARY, TO THE EXTENT PERMITTED BY APPLICABLE LAW.
+EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR
+OTHER PARTIES PROVIDE THE LIBRARY "AS IS" WITHOUT WARRANTY OF ANY
+KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE
+IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+PURPOSE.  THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE
+LIBRARY IS WITH YOU.  SHOULD THE LIBRARY PROVE DEFECTIVE, YOU ASSUME
+THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION.
+
+  16. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN
+WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY
+AND/OR REDISTRIBUTE THE LIBRARY AS PERMITTED ABOVE, BE LIABLE TO YOU
+FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR
+CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE
+LIBRARY (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING
+RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A
+FAILURE OF THE LIBRARY TO OPERATE WITH ANY OTHER SOFTWARE), EVEN IF
+SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH
+DAMAGES.
+
+	 END OF TERMS AND CONDITIONS
+
+	   How to Apply These Terms to Your New Libraries
+
+  If you develop a new library, and you want it to be of the greatest
+possible use to the public, we recommend making it free software that
+everyone can redistribute and change.  You can do so by permitting
+redistribution under these terms (or, alternatively, under the terms of the
+ordinary General Public License).
+
+  To apply these terms, attach the following notices to the library.  It is
+safest to attach them to the start of each source file to most effectively
+convey the exclusion of warranty; and each file should have at least the
+"copyright" line and a pointer to where the full notice is found.
+
+    <one line to give the library's name and a brief idea of what it does.>
+    Copyright (C) <year>  <name of author>
+
+    This library is free software; you can redistribute it and/or
+    modify it under the terms of the GNU Lesser General Public
+    License as published by the Free Software Foundation; either
+    version 2.1 of the License, or (at your option) any later version.
+
+    This library is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+    Lesser General Public License for more details.
+
+    You should have received a copy of the GNU Lesser General Public
+    License along with this library; if not, write to the Free Software
+    Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+
+Also add information on how to contact you by electronic and paper mail.
+
+You should also get your employer (if you work as a programmer) or your
+school, if any, to sign a "copyright disclaimer" for the library, if
+necessary.  Here is a sample; alter the names:
+
+  Yoyodyne, Inc., hereby disclaims all copyright interest in the
+  library `Frob' (a library for tweaking knobs) written by James Random Hacker.
+
+  <signature of Ty Coon>, 1 April 1990
+  Ty Coon, President of Vice
+
+That's all there is to it!
diff --git a/lib_generic/lzma/LzmaDecode.c b/lib_generic/lzma/LzmaDecode.c
new file mode 100644
index 000000000..3470e55d6
--- /dev/null
+++ b/lib_generic/lzma/LzmaDecode.c
@@ -0,0 +1,584 @@
+/*
+  LzmaDecode.c
+  LZMA Decoder (optimized for Speed version)
+
+  LZMA SDK 4.40 Copyright (c) 1999-2006 Igor Pavlov (2006-05-01)
+  http://www.7-zip.org/
+
+  LZMA SDK is licensed under two licenses:
+  1) GNU Lesser General Public License (GNU LGPL)
+  2) Common Public License (CPL)
+  It means that you can select one of these two licenses and
+  follow rules of that license.
+
+  SPECIAL EXCEPTION:
+  Igor Pavlov, as the author of this Code, expressly permits you to
+  statically or dynamically link your Code (or bind by name) to the
+  interfaces of this file without subjecting your linked Code to the
+  terms of the CPL or GNU LGPL. Any modifications or additions
+  to this file, however, are subject to the LGPL or CPL terms.
+*/
+
+#include "LzmaDecode.h"
+
+#define kNumTopBits 24
+#define kTopValue ((UInt32)1 << kNumTopBits)
+
+#define kNumBitModelTotalBits 11
+#define kBitModelTotal (1 << kNumBitModelTotalBits)
+#define kNumMoveBits 5
+
+#define RC_READ_BYTE (*Buffer++)
+
+#define RC_INIT2 Code = 0; Range = 0xFFFFFFFF; \
+  { int i; for(i = 0; i < 5; i++) { RC_TEST; Code = (Code << 8) | RC_READ_BYTE; }}
+
+#ifdef _LZMA_IN_CB
+
+#define RC_TEST { if (Buffer == BufferLim) \
+  { SizeT size; int result = InCallback->Read(InCallback, &Buffer, &size); if (result != LZMA_RESULT_OK) return result; \
+  BufferLim = Buffer + size; if (size == 0) return LZMA_RESULT_DATA_ERROR; }}
+
+#define RC_INIT Buffer = BufferLim = 0; RC_INIT2
+
+#else
+
+#define RC_TEST { if (Buffer == BufferLim) return LZMA_RESULT_DATA_ERROR; }
+
+#define RC_INIT(buffer, bufferSize) Buffer = buffer; BufferLim = buffer + bufferSize; RC_INIT2
+
+#endif
+
+#define RC_NORMALIZE if (Range < kTopValue) { RC_TEST; Range <<= 8; Code = (Code << 8) | RC_READ_BYTE; }
+
+#define IfBit0(p) RC_NORMALIZE; bound = (Range >> kNumBitModelTotalBits) * *(p); if (Code < bound)
+#define UpdateBit0(p) Range = bound; *(p) += (kBitModelTotal - *(p)) >> kNumMoveBits;
+#define UpdateBit1(p) Range -= bound; Code -= bound; *(p) -= (*(p)) >> kNumMoveBits;
+
+#define RC_GET_BIT2(p, mi, A0, A1) IfBit0(p) \
+  { UpdateBit0(p); mi <<= 1; A0; } else \
+  { UpdateBit1(p); mi = (mi + mi) + 1; A1; }
+
+#define RC_GET_BIT(p, mi) RC_GET_BIT2(p, mi, ; , ;)
+
+#define RangeDecoderBitTreeDecode(probs, numLevels, res) \
+  { int i = numLevels; res = 1; \
+  do { CProb *p = probs + res; RC_GET_BIT(p, res) } while(--i != 0); \
+  res -= (1 << numLevels); }
+
+
+#define kNumPosBitsMax 4
+#define kNumPosStatesMax (1 << kNumPosBitsMax)
+
+#define kLenNumLowBits 3
+#define kLenNumLowSymbols (1 << kLenNumLowBits)
+#define kLenNumMidBits 3
+#define kLenNumMidSymbols (1 << kLenNumMidBits)
+#define kLenNumHighBits 8
+#define kLenNumHighSymbols (1 << kLenNumHighBits)
+
+#define LenChoice 0
+#define LenChoice2 (LenChoice + 1)
+#define LenLow (LenChoice2 + 1)
+#define LenMid (LenLow + (kNumPosStatesMax << kLenNumLowBits))
+#define LenHigh (LenMid + (kNumPosStatesMax << kLenNumMidBits))
+#define kNumLenProbs (LenHigh + kLenNumHighSymbols)
+
+
+#define kNumStates 12
+#define kNumLitStates 7
+
+#define kStartPosModelIndex 4
+#define kEndPosModelIndex 14
+#define kNumFullDistances (1 << (kEndPosModelIndex >> 1))
+
+#define kNumPosSlotBits 6
+#define kNumLenToPosStates 4
+
+#define kNumAlignBits 4
+#define kAlignTableSize (1 << kNumAlignBits)
+
+#define kMatchMinLen 2
+
+#define IsMatch 0
+#define IsRep (IsMatch + (kNumStates << kNumPosBitsMax))
+#define IsRepG0 (IsRep + kNumStates)
+#define IsRepG1 (IsRepG0 + kNumStates)
+#define IsRepG2 (IsRepG1 + kNumStates)
+#define IsRep0Long (IsRepG2 + kNumStates)
+#define PosSlot (IsRep0Long + (kNumStates << kNumPosBitsMax))
+#define SpecPos (PosSlot + (kNumLenToPosStates << kNumPosSlotBits))
+#define Align (SpecPos + kNumFullDistances - kEndPosModelIndex)
+#define LenCoder (Align + kAlignTableSize)
+#define RepLenCoder (LenCoder + kNumLenProbs)
+#define Literal (RepLenCoder + kNumLenProbs)
+
+#if Literal != LZMA_BASE_SIZE
+StopCompilingDueBUG
+#endif
+
+int LzmaDecodeProperties(CLzmaProperties *propsRes, const unsigned char *propsData, int size)
+{
+  unsigned char prop0;
+  if (size < LZMA_PROPERTIES_SIZE)
+    return LZMA_RESULT_DATA_ERROR;
+  prop0 = propsData[0];
+  if (prop0 >= (9 * 5 * 5))
+    return LZMA_RESULT_DATA_ERROR;
+  {
+    for (propsRes->pb = 0; prop0 >= (9 * 5); propsRes->pb++, prop0 -= (9 * 5));
+    for (propsRes->lp = 0; prop0 >= 9; propsRes->lp++, prop0 -= 9);
+    propsRes->lc = prop0;
+    /*
+    unsigned char remainder = (unsigned char)(prop0 / 9);
+    propsRes->lc = prop0 % 9;
+    propsRes->pb = remainder / 5;
+    propsRes->lp = remainder % 5;
+    */
+  }
+
+  #ifdef _LZMA_OUT_READ
+  {
+    int i;
+    propsRes->DictionarySize = 0;
+    for (i = 0; i < 4; i++)
+      propsRes->DictionarySize += (UInt32)(propsData[1 + i]) << (i * 8);
+    if (propsRes->DictionarySize == 0)
+      propsRes->DictionarySize = 1;
+  }
+  #endif
+  return LZMA_RESULT_OK;
+}
+
+#define kLzmaStreamWasFinishedId (-1)
+
+int LzmaDecode(CLzmaDecoderState *vs,
+    #ifdef _LZMA_IN_CB
+    ILzmaInCallback *InCallback,
+    #else
+    const unsigned char *inStream, SizeT inSize, SizeT *inSizeProcessed,
+    #endif
+    unsigned char *outStream, SizeT outSize, SizeT *outSizeProcessed)
+{
+  CProb *p = vs->Probs;
+  SizeT nowPos = 0;
+  Byte previousByte = 0;
+  UInt32 posStateMask = (1 << (vs->Properties.pb)) - 1;
+  UInt32 literalPosMask = (1 << (vs->Properties.lp)) - 1;
+  int lc = vs->Properties.lc;
+
+  #ifdef _LZMA_OUT_READ
+
+  UInt32 Range = vs->Range;
+  UInt32 Code = vs->Code;
+  #ifdef _LZMA_IN_CB
+  const Byte *Buffer = vs->Buffer;
+  const Byte *BufferLim = vs->BufferLim;
+  #else
+  const Byte *Buffer = inStream;
+  const Byte *BufferLim = inStream + inSize;
+  #endif
+  int state = vs->State;
+  UInt32 rep0 = vs->Reps[0], rep1 = vs->Reps[1], rep2 = vs->Reps[2], rep3 = vs->Reps[3];
+  int len = vs->RemainLen;
+  UInt32 globalPos = vs->GlobalPos;
+  UInt32 distanceLimit = vs->DistanceLimit;
+
+  Byte *dictionary = vs->Dictionary;
+  UInt32 dictionarySize = vs->Properties.DictionarySize;
+  UInt32 dictionaryPos = vs->DictionaryPos;
+
+  Byte tempDictionary[4];
+
+  #ifndef _LZMA_IN_CB
+  *inSizeProcessed = 0;
+  #endif
+  *outSizeProcessed = 0;
+  if (len == kLzmaStreamWasFinishedId)
+    return LZMA_RESULT_OK;
+
+  if (dictionarySize == 0)
+  {
+    dictionary = tempDictionary;
+    dictionarySize = 1;
+    tempDictionary[0] = vs->TempDictionary[0];
+  }
+
+  if (len == kLzmaNeedInitId)
+  {
+    {
+      UInt32 numProbs = Literal + ((UInt32)LZMA_LIT_SIZE << (lc + vs->Properties.lp));
+      UInt32 i;
+      for (i = 0; i < numProbs; i++)
+        p[i] = kBitModelTotal >> 1;
+      rep0 = rep1 = rep2 = rep3 = 1;
+      state = 0;
+      globalPos = 0;
+      distanceLimit = 0;
+      dictionaryPos = 0;
+      dictionary[dictionarySize - 1] = 0;
+      #ifdef _LZMA_IN_CB
+      RC_INIT;
+      #else
+      RC_INIT(inStream, inSize);
+      #endif
+    }
+    len = 0;
+  }
+  while(len != 0 && nowPos < outSize)
+  {
+    UInt32 pos = dictionaryPos - rep0;
+    if (pos >= dictionarySize)
+      pos += dictionarySize;
+    outStream[nowPos++] = dictionary[dictionaryPos] = dictionary[pos];
+    if (++dictionaryPos == dictionarySize)
+      dictionaryPos = 0;
+    len--;
+  }
+  if (dictionaryPos == 0)
+    previousByte = dictionary[dictionarySize - 1];
+  else
+    previousByte = dictionary[dictionaryPos - 1];
+
+  #else /* if !_LZMA_OUT_READ */
+
+  int state = 0;
+  UInt32 rep0 = 1, rep1 = 1, rep2 = 1, rep3 = 1;
+  int len = 0;
+  const Byte *Buffer;
+  const Byte *BufferLim;
+  UInt32 Range;
+  UInt32 Code;
+
+  #ifndef _LZMA_IN_CB
+  *inSizeProcessed = 0;
+  #endif
+  *outSizeProcessed = 0;
+
+  {
+    UInt32 i;
+    UInt32 numProbs = Literal + ((UInt32)LZMA_LIT_SIZE << (lc + vs->Properties.lp));
+    for (i = 0; i < numProbs; i++)
+      p[i] = kBitModelTotal >> 1;
+  }
+
+  #ifdef _LZMA_IN_CB
+  RC_INIT;
+  #else
+  RC_INIT(inStream, inSize);
+  #endif
+
+  #endif /* _LZMA_OUT_READ */
+
+  while(nowPos < outSize)
+  {
+    CProb *prob;
+    UInt32 bound;
+    int posState = (int)(
+        (nowPos
+        #ifdef _LZMA_OUT_READ
+        + globalPos
+        #endif
+        )
+        & posStateMask);
+
+    prob = p + IsMatch + (state << kNumPosBitsMax) + posState;
+    IfBit0(prob)
+    {
+      int symbol = 1;
+      UpdateBit0(prob)
+      prob = p + Literal + (LZMA_LIT_SIZE *
+        (((
+        (nowPos
+        #ifdef _LZMA_OUT_READ
+        + globalPos
+        #endif
+        )
+        & literalPosMask) << lc) + (previousByte >> (8 - lc))));
+
+      if (state >= kNumLitStates)
+      {
+        int matchByte;
+        #ifdef _LZMA_OUT_READ
+        UInt32 pos = dictionaryPos - rep0;
+        if (pos >= dictionarySize)
+          pos += dictionarySize;
+        matchByte = dictionary[pos];
+        #else
+        matchByte = outStream[nowPos - rep0];
+        #endif
+        do
+        {
+          int bit;
+          CProb *probLit;
+          matchByte <<= 1;
+          bit = (matchByte & 0x100);
+          probLit = prob + 0x100 + bit + symbol;
+          RC_GET_BIT2(probLit, symbol, if (bit != 0) break, if (bit == 0) break)
+        }
+        while (symbol < 0x100);
+      }
+      while (symbol < 0x100)
+      {
+        CProb *probLit = prob + symbol;
+        RC_GET_BIT(probLit, symbol)
+      }
+      previousByte = (Byte)symbol;
+
+      outStream[nowPos++] = previousByte;
+      #ifdef _LZMA_OUT_READ
+      if (distanceLimit < dictionarySize)
+        distanceLimit++;
+
+      dictionary[dictionaryPos] = previousByte;
+      if (++dictionaryPos == dictionarySize)
+        dictionaryPos = 0;
+      #endif
+      if (state < 4) state = 0;
+      else if (state < 10) state -= 3;
+      else state -= 6;
+    }
+    else
+    {
+      UpdateBit1(prob);
+      prob = p + IsRep + state;
+      IfBit0(prob)
+      {
+        UpdateBit0(prob);
+        rep3 = rep2;
+        rep2 = rep1;
+        rep1 = rep0;
+        state = state < kNumLitStates ? 0 : 3;
+        prob = p + LenCoder;
+      }
+      else
+      {
+        UpdateBit1(prob);
+        prob = p + IsRepG0 + state;
+        IfBit0(prob)
+        {
+          UpdateBit0(prob);
+          prob = p + IsRep0Long + (state << kNumPosBitsMax) + posState;
+          IfBit0(prob)
+          {
+            #ifdef _LZMA_OUT_READ
+            UInt32 pos;
+            #endif
+            UpdateBit0(prob);
+
+            #ifdef _LZMA_OUT_READ
+            if (distanceLimit == 0)
+            #else
+            if (nowPos == 0)
+            #endif
+              return LZMA_RESULT_DATA_ERROR;
+
+            state = state < kNumLitStates ? 9 : 11;
+            #ifdef _LZMA_OUT_READ
+            pos = dictionaryPos - rep0;
+            if (pos >= dictionarySize)
+              pos += dictionarySize;
+            previousByte = dictionary[pos];
+            dictionary[dictionaryPos] = previousByte;
+            if (++dictionaryPos == dictionarySize)
+              dictionaryPos = 0;
+            #else
+            previousByte = outStream[nowPos - rep0];
+            #endif
+            outStream[nowPos++] = previousByte;
+            #ifdef _LZMA_OUT_READ
+            if (distanceLimit < dictionarySize)
+              distanceLimit++;
+            #endif
+
+            continue;
+          }
+          else
+          {
+            UpdateBit1(prob);
+          }
+        }
+        else
+        {
+          UInt32 distance;
+          UpdateBit1(prob);
+          prob = p + IsRepG1 + state;
+          IfBit0(prob)
+          {
+            UpdateBit0(prob);
+            distance = rep1;
+          }
+          else
+          {
+            UpdateBit1(prob);
+            prob = p + IsRepG2 + state;
+            IfBit0(prob)
+            {
+              UpdateBit0(prob);
+              distance = rep2;
+            }
+            else
+            {
+              UpdateBit1(prob);
+              distance = rep3;
+              rep3 = rep2;
+            }
+            rep2 = rep1;
+          }
+          rep1 = rep0;
+          rep0 = distance;
+        }
+        state = state < kNumLitStates ? 8 : 11;
+        prob = p + RepLenCoder;
+      }
+      {
+        int numBits, offset;
+        CProb *probLen = prob + LenChoice;
+        IfBit0(probLen)
+        {
+          UpdateBit0(probLen);
+          probLen = prob + LenLow + (posState << kLenNumLowBits);
+          offset = 0;
+          numBits = kLenNumLowBits;
+        }
+        else
+        {
+          UpdateBit1(probLen);
+          probLen = prob + LenChoice2;
+          IfBit0(probLen)
+          {
+            UpdateBit0(probLen);
+            probLen = prob + LenMid + (posState << kLenNumMidBits);
+            offset = kLenNumLowSymbols;
+            numBits = kLenNumMidBits;
+          }
+          else
+          {
+            UpdateBit1(probLen);
+            probLen = prob + LenHigh;
+            offset = kLenNumLowSymbols + kLenNumMidSymbols;
+            numBits = kLenNumHighBits;
+          }
+        }
+        RangeDecoderBitTreeDecode(probLen, numBits, len);
+        len += offset;
+      }
+
+      if (state < 4)
+      {
+        int posSlot;
+        state += kNumLitStates;
+        prob = p + PosSlot +
+            ((len < kNumLenToPosStates ? len : kNumLenToPosStates - 1) <<
+            kNumPosSlotBits);
+        RangeDecoderBitTreeDecode(prob, kNumPosSlotBits, posSlot);
+        if (posSlot >= kStartPosModelIndex)
+        {
+          int numDirectBits = ((posSlot >> 1) - 1);
+          rep0 = (2 | ((UInt32)posSlot & 1));
+          if (posSlot < kEndPosModelIndex)
+          {
+            rep0 <<= numDirectBits;
+            prob = p + SpecPos + rep0 - posSlot - 1;
+          }
+          else
+          {
+            numDirectBits -= kNumAlignBits;
+            do
+            {
+              RC_NORMALIZE
+              Range >>= 1;
+              rep0 <<= 1;
+              if (Code >= Range)
+              {
+                Code -= Range;
+                rep0 |= 1;
+              }
+            }
+            while (--numDirectBits != 0);
+            prob = p + Align;
+            rep0 <<= kNumAlignBits;
+            numDirectBits = kNumAlignBits;
+          }
+          {
+            int i = 1;
+            int mi = 1;
+            do
+            {
+              CProb *prob3 = prob + mi;
+              RC_GET_BIT2(prob3, mi, ; , rep0 |= i);
+              i <<= 1;
+            }
+            while(--numDirectBits != 0);
+          }
+        }
+        else
+          rep0 = posSlot;
+        if (++rep0 == (UInt32)(0))
+        {
+          /* it's for stream version */
+          len = kLzmaStreamWasFinishedId;
+          break;
+        }
+      }
+
+      len += kMatchMinLen;
+      #ifdef _LZMA_OUT_READ
+      if (rep0 > distanceLimit)
+      #else
+      if (rep0 > nowPos)
+      #endif
+        return LZMA_RESULT_DATA_ERROR;
+
+      #ifdef _LZMA_OUT_READ
+      if (dictionarySize - distanceLimit > (UInt32)len)
+        distanceLimit += len;
+      else
+        distanceLimit = dictionarySize;
+      #endif
+
+      do
+      {
+        #ifdef _LZMA_OUT_READ
+        UInt32 pos = dictionaryPos - rep0;
+        if (pos >= dictionarySize)
+          pos += dictionarySize;
+        previousByte = dictionary[pos];
+        dictionary[dictionaryPos] = previousByte;
+        if (++dictionaryPos == dictionarySize)
+          dictionaryPos = 0;
+        #else
+        previousByte = outStream[nowPos - rep0];
+        #endif
+        len--;
+        outStream[nowPos++] = previousByte;
+      }
+      while(len != 0 && nowPos < outSize);
+    }
+  }
+  RC_NORMALIZE;
+
+  #ifdef _LZMA_OUT_READ
+  vs->Range = Range;
+  vs->Code = Code;
+  vs->DictionaryPos = dictionaryPos;
+  vs->GlobalPos = globalPos + (UInt32)nowPos;
+  vs->DistanceLimit = distanceLimit;
+  vs->Reps[0] = rep0;
+  vs->Reps[1] = rep1;
+  vs->Reps[2] = rep2;
+  vs->Reps[3] = rep3;
+  vs->State = state;
+  vs->RemainLen = len;
+  vs->TempDictionary[0] = tempDictionary[0];
+  #endif
+
+  #ifdef _LZMA_IN_CB
+  vs->Buffer = Buffer;
+  vs->BufferLim = BufferLim;
+  #else
+  *inSizeProcessed = (SizeT)(Buffer - inStream);
+  #endif
+  *outSizeProcessed = nowPos;
+  return LZMA_RESULT_OK;
+}
diff --git a/lib_generic/lzma/LzmaDecode.h b/lib_generic/lzma/LzmaDecode.h
new file mode 100644
index 000000000..bd75525ae
--- /dev/null
+++ b/lib_generic/lzma/LzmaDecode.h
@@ -0,0 +1,113 @@
+/*
+  LzmaDecode.h
+  LZMA Decoder interface
+
+  LZMA SDK 4.40 Copyright (c) 1999-2006 Igor Pavlov (2006-05-01)
+  http://www.7-zip.org/
+
+  LZMA SDK is licensed under two licenses:
+  1) GNU Lesser General Public License (GNU LGPL)
+  2) Common Public License (CPL)
+  It means that you can select one of these two licenses and
+  follow rules of that license.
+
+  SPECIAL EXCEPTION:
+  Igor Pavlov, as the author of this code, expressly permits you to
+  statically or dynamically link your code (or bind by name) to the
+  interfaces of this file without subjecting your linked code to the
+  terms of the CPL or GNU LGPL. Any modifications or additions
+  to this file, however, are subject to the LGPL or CPL terms.
+*/
+
+#ifndef __LZMADECODE_H
+#define __LZMADECODE_H
+
+#include "LzmaTypes.h"
+
+/* #define _LZMA_IN_CB */
+/* Use callback for input data */
+
+/* #define _LZMA_OUT_READ */
+/* Use read function for output data */
+
+/* #define _LZMA_PROB32 */
+/* It can increase speed on some 32-bit CPUs,
+   but memory usage will be doubled in that case */
+
+/* #define _LZMA_LOC_OPT */
+/* Enable local speed optimizations inside code */
+
+#ifdef _LZMA_PROB32
+#define CProb UInt32
+#else
+#define CProb UInt16
+#endif
+
+#define LZMA_RESULT_OK 0
+#define LZMA_RESULT_DATA_ERROR 1
+
+#ifdef _LZMA_IN_CB
+typedef struct _ILzmaInCallback
+{
+  int (*Read)(void *object, const unsigned char **buffer, SizeT *bufferSize);
+} ILzmaInCallback;
+#endif
+
+#define LZMA_BASE_SIZE 1846
+#define LZMA_LIT_SIZE 768
+
+#define LZMA_PROPERTIES_SIZE 5
+
+typedef struct _CLzmaProperties
+{
+  int lc;
+  int lp;
+  int pb;
+  #ifdef _LZMA_OUT_READ
+  UInt32 DictionarySize;
+  #endif
+}CLzmaProperties;
+
+int LzmaDecodeProperties(CLzmaProperties *propsRes, const unsigned char *propsData, int size);
+
+#define LzmaGetNumProbs(Properties) (LZMA_BASE_SIZE + (LZMA_LIT_SIZE << ((Properties)->lc + (Properties)->lp)))
+
+#define kLzmaNeedInitId (-2)
+
+typedef struct _CLzmaDecoderState
+{
+  CLzmaProperties Properties;
+  CProb *Probs;
+
+  #ifdef _LZMA_IN_CB
+  const unsigned char *Buffer;
+  const unsigned char *BufferLim;
+  #endif
+
+  #ifdef _LZMA_OUT_READ
+  unsigned char *Dictionary;
+  UInt32 Range;
+  UInt32 Code;
+  UInt32 DictionaryPos;
+  UInt32 GlobalPos;
+  UInt32 DistanceLimit;
+  UInt32 Reps[4];
+  int State;
+  int RemainLen;
+  unsigned char TempDictionary[4];
+  #endif
+} CLzmaDecoderState;
+
+#ifdef _LZMA_OUT_READ
+#define LzmaDecoderInit(vs) { (vs)->RemainLen = kLzmaNeedInitId; }
+#endif
+
+int LzmaDecode(CLzmaDecoderState *vs,
+    #ifdef _LZMA_IN_CB
+    ILzmaInCallback *inCallback,
+    #else
+    const unsigned char *inStream, SizeT inSize, SizeT *inSizeProcessed,
+    #endif
+    unsigned char *outStream, SizeT outSize, SizeT *outSizeProcessed);
+
+#endif
diff --git a/lib_generic/lzma/LzmaTools.c b/lib_generic/lzma/LzmaTools.c
new file mode 100644
index 000000000..5ac42e5ae
--- /dev/null
+++ b/lib_generic/lzma/LzmaTools.c
@@ -0,0 +1,142 @@
+/*
+ * Usefuls routines based on the LzmaTest.c file from LZMA SDK 4.57
+ *
+ * Copyright (C) 2007-2008 Industrie Dial Face S.p.A.
+ * Luigi 'Comio' Mantellini (luigi.mantellini@idf-hit.com)
+ *
+ * Copyright (C) 1999-2005 Igor Pavlov
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * LZMA_Alone stream format:
+ *
+ * uchar   Properties[5]
+ * uint64  Uncompressed size
+ * uchar   data[*]
+ *
+ */
+
+#include <config.h>
+#include <common.h>
+
+#ifdef CONFIG_LZMA
+
+#define LZMA_PROPERTIES_OFFSET 0
+#define LZMA_SIZE_OFFSET       LZMA_PROPERTIES_SIZE
+#define LZMA_DATA_OFFSET       LZMA_SIZE_OFFSET+sizeof(uint64_t)
+
+#include "LzmaTools.h"
+#include "LzmaDecode.h"
+
+#include <linux/string.h>
+#include <malloc.h>
+
+int lzmaBuffToBuffDecompress (unsigned char *outStream, SizeT *uncompressedSize,
+			      unsigned char *inStream,  SizeT  length)
+{
+	int res = LZMA_RESULT_DATA_ERROR;
+	int i;
+
+	SizeT outSizeFull = 0xFFFFFFFF; /* 4GBytes limit */
+	SizeT inProcessed;
+	SizeT outProcessed;
+	SizeT outSize;
+	SizeT outSizeHigh;
+	CLzmaDecoderState state;  /* it's about 24-80 bytes structure, if int is 32-bit */
+	unsigned char properties[LZMA_PROPERTIES_SIZE];
+	SizeT compressedSize = (SizeT)(length - LZMA_DATA_OFFSET);
+
+	debug ("LZMA: Image address............... 0x%lx\n", inStream);
+	debug ("LZMA: Properties address.......... 0x%lx\n", inStream + LZMA_PROPERTIES_OFFSET);
+	debug ("LZMA: Uncompressed size address... 0x%lx\n", inStream + LZMA_SIZE_OFFSET);
+	debug ("LZMA: Compressed data address..... 0x%lx\n", inStream + LZMA_DATA_OFFSET);
+	debug ("LZMA: Destination address......... 0x%lx\n", outStream);
+
+	memcpy(properties, inStream + LZMA_PROPERTIES_OFFSET, LZMA_PROPERTIES_SIZE);
+
+	memset(&state, 0, sizeof(state));
+	res = LzmaDecodeProperties(&state.Properties,
+				 properties,
+				 LZMA_PROPERTIES_SIZE);
+	if (res != LZMA_RESULT_OK) {
+		return res;
+	}
+
+	outSize = 0;
+	outSizeHigh = 0;
+	/* Read the uncompressed size */
+	for (i = 0; i < 8; i++) {
+		unsigned char b = inStream[LZMA_SIZE_OFFSET + i];
+	        if (i < 4) {
+		        outSize     += (UInt32)(b) << (i * 8);
+		} else {
+	                outSizeHigh += (UInt32)(b) << ((i - 4) * 8);
+		}
+	}
+
+	outSizeFull = (SizeT)outSize;
+	if (sizeof(SizeT) >= 8) {
+		/*
+	         * SizeT is a 64 bit uint => We can manage files larger than 4GB!
+		 *
+		 */
+	        outSizeFull |= (((SizeT)outSizeHigh << 16) << 16);
+	} else if (outSizeHigh != 0 || (UInt32)(SizeT)outSize != outSize) {
+	        /*
+		 * SizeT is a 32 bit uint => We cannot manage files larger than
+		 * 4GB!
+		 *
+		 */
+		debug ("LZMA: 64bit support not enabled.\n");
+	        return LZMA_RESULT_DATA_ERROR;
+	}
+
+	debug ("LZMA: Uncompresed size............ 0x%lx\n", outSizeFull);
+	debug ("LZMA: Compresed size.............. 0x%lx\n", compressedSize);
+	debug ("LZMA: Dynamic memory needed....... 0x%lx", LzmaGetNumProbs(&state.Properties) * sizeof(CProb));
+
+	state.Probs = (CProb *)malloc(LzmaGetNumProbs(&state.Properties) * sizeof(CProb));
+
+	if (state.Probs == 0
+	    || (outStream == 0 && outSizeFull != 0)
+	    || (inStream == 0 && compressedSize != 0)) {
+		free(state.Probs);
+		debug ("\n");
+		return LZMA_RESULT_DATA_ERROR;
+	}
+
+	debug (" allocated.\n");
+
+	/* Decompress */
+
+	res = LzmaDecode(&state,
+		inStream + LZMA_DATA_OFFSET, compressedSize, &inProcessed,
+		outStream, outSizeFull,  &outProcessed);
+	if (res != LZMA_RESULT_OK)  {
+		return res;
+	}
+
+	*uncompressedSize = outProcessed;
+	free(state.Probs);
+	return res;
+}
+
+#endif
diff --git a/lib_generic/lzma/LzmaTools.h b/lib_generic/lzma/LzmaTools.h
new file mode 100644
index 000000000..c91fb899c
--- /dev/null
+++ b/lib_generic/lzma/LzmaTools.h
@@ -0,0 +1,35 @@
+/*
+ * Usefuls routines based on the LzmaTest.c file from LZMA SDK 4.57
+ *
+ * Copyright (C) 2007-2008 Industrie Dial Face S.p.A.
+ * Luigi 'Comio' Mantellini (luigi.mantellini@idf-hit.com)
+ *
+ * Copyright (C) 1999-2005 Igor Pavlov
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __LZMA_TOOL_H__
+#define __LZMA_TOOL_H__
+
+#include "LzmaTypes.h"
+
+extern int lzmaBuffToBuffDecompress (unsigned char *outStream, SizeT *uncompressedSize,
+			      unsigned char *inStream,  SizeT  length);
+#endif
diff --git a/lib_generic/lzma/LzmaTypes.h b/lib_generic/lzma/LzmaTypes.h
new file mode 100644
index 000000000..83f96f464
--- /dev/null
+++ b/lib_generic/lzma/LzmaTypes.h
@@ -0,0 +1,45 @@
+/*
+LzmaTypes.h
+
+Types for LZMA Decoder
+
+This file written and distributed to public domain by Igor Pavlov.
+This file is part of LZMA SDK 4.40 (2006-05-01)
+*/
+
+#ifndef __LZMATYPES_H
+#define __LZMATYPES_H
+
+#ifndef _7ZIP_BYTE_DEFINED
+#define _7ZIP_BYTE_DEFINED
+typedef unsigned char Byte;
+#endif
+
+#ifndef _7ZIP_UINT16_DEFINED
+#define _7ZIP_UINT16_DEFINED
+typedef unsigned short UInt16;
+#endif
+
+#ifndef _7ZIP_UINT32_DEFINED
+#define _7ZIP_UINT32_DEFINED
+#ifdef _LZMA_UINT32_IS_ULONG
+typedef unsigned long UInt32;
+#else
+typedef unsigned int UInt32;
+#endif
+#endif
+
+/* #define _LZMA_NO_SYSTEM_SIZE_T */
+/* You can use it, if you don't want <stddef.h> */
+
+#ifndef _7ZIP_SIZET_DEFINED
+#define _7ZIP_SIZET_DEFINED
+#ifdef _LZMA_NO_SYSTEM_SIZE_T
+typedef UInt32 SizeT;
+#else
+#include <stddef.h>
+typedef size_t SizeT;
+#endif
+#endif
+
+#endif
diff --git a/lib_generic/lzma/Makefile b/lib_generic/lzma/Makefile
new file mode 100644
index 000000000..3400cd929
--- /dev/null
+++ b/lib_generic/lzma/Makefile
@@ -0,0 +1,49 @@
+#
+# Copyright (C) 2007-2008 Industrie Dial Face S.p.A.
+# Luigi 'Comio' Mantellini (luigi.mantellini@idf-hit.com)
+#
+# (C) Copyright 2003-2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= $(obj)liblzma.a
+
+SOBJS	=
+
+COBJS-$(CONFIG_LZMA) += LzmaDecode.o LzmaTools.o
+
+COBJS	= $(COBJS-y)
+SRCS 	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS	:= $(addprefix $(obj),$(SOBJS) $(COBJS))
+
+$(LIB):	$(obj).depend $(OBJS)
+	$(AR) $(ARFLAGS) $@ $(OBJS)
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/lib_generic/lzma/README.txt b/lib_generic/lzma/README.txt
new file mode 100644
index 000000000..fdb3086f4
--- /dev/null
+++ b/lib_generic/lzma/README.txt
@@ -0,0 +1,28 @@
+The lib_lzma functionality was written by Igor Pavlov.
+The original source cames from the LZMA SDK web page:
+
+URL: 		http://www.7-zip.org/sdk.html
+Author:         Igor Pavlov
+
+The import is made using the import_lzmasdk.sh script that:
+
+* untars the lzmaXYY.tar.bz2 file (from the download web page)
+* copies the files LzmaDecode.h, LzmaTypes.h, LzmaDecode.c, history.txt,
+  LGPL.txt, and lzma.txt from source archive into the lib_lzma directory (pwd).
+
+Example:
+
+ ./import_lzmasdk.sh ~/lzma457.tar.bz2
+
+Notice: The files from lzma sdk are not _modified_ by this script!
+
+The files LzmaTools.{c,h} are provided to export the lzmaBuffToBuffDecompress()
+function that wraps the complex LzmaDecode() function from the LZMA SDK. The
+do_bootm() function uses the lzmaBuffToBuffDecopress() function to expand the
+compressed image.
+
+The directory U-BOOT/include/lzma contains stubs files that permit to use the
+library directly from U-BOOT code without touching the original LZMA SDK's
+files.
+
+Luigi 'Comio' Mantellini <luigi.mantellini@idf-hit.com>
diff --git a/lib_generic/lzma/history.txt b/lib_generic/lzma/history.txt
new file mode 100644
index 000000000..dad18581e
--- /dev/null
+++ b/lib_generic/lzma/history.txt
@@ -0,0 +1,198 @@
+HISTORY of the LZMA SDK
+-----------------------
+
+  4.57		 2007-12-12
+  -------------------------
+    - Speed optimizations in Ñ++ LZMA Decoder.
+    - Small changes for more compatibility with some C/C++ compilers.
+
+
+  4.49 beta	 2007-07-05
+  -------------------------
+    - .7z ANSI-C Decoder:
+	 - now it supports BCJ and BCJ2 filters
+	 - now it supports files larger than 4 GB.
+	 - now it supports "Last Write Time" field for files.
+    - C++ code for .7z archives compressing/decompressing from 7-zip
+      was included to LZMA SDK.
+
+
+  4.43		 2006-06-04
+  -------------------------
+    - Small changes for more compatibility with some C/C++ compilers.
+
+
+  4.42		 2006-05-15
+  -------------------------
+    - Small changes in .h files in ANSI-C version.
+
+
+  4.39 beta	 2006-04-14
+  -------------------------
+    - Bug in versions 4.33b:4.38b was fixed:
+      C++ version of LZMA encoder could not correctly compress
+      files larger than 2 GB with HC4 match finder (-mfhc4).
+
+
+  4.37 beta	 2005-04-06
+  -------------------------
+    - Fixes in C++ code: code could no be compiled if _NO_EXCEPTIONS was defined.
+
+
+  4.35 beta	 2005-03-02
+  -------------------------
+    - Bug was fixed in C++ version of LZMA Decoder:
+       If encoded stream was corrupted, decoder could access memory
+       outside of allocated range.
+
+
+  4.34 beta	 2006-02-27
+  -------------------------
+    - Compressing speed and memory requirements for compressing were increased
+    - LZMA now can use only these match finders: HC4, BT2, BT3, BT4
+
+
+  4.32		 2005-12-09
+  -------------------------
+    - Java version of LZMA SDK was included
+
+
+  4.30		 2005-11-20
+  -------------------------
+    - Compression ratio was improved in -a2 mode
+    - Speed optimizations for compressing in -a2 mode
+    - -fb switch now supports values up to 273
+    - Bug in 7z_C (7zIn.c) was fixed:
+      It used Alloc/Free functions from different memory pools.
+      So if program used two memory pools, it worked incorrectly.
+    - 7z_C: .7z format supporting was improved
+    - LZMA# SDK (C#.NET version) was included
+
+
+  4.27 (Updated) 2005-09-21
+  -------------------------
+   - Some GUIDs/interfaces in C++ were changed.
+     IStream.h:
+       ISequentialInStream::Read now works as old ReadPart
+       ISequentialOutStream::Write now works as old WritePart
+
+
+  4.27		 2005-08-07
+  -------------------------
+    - Bug in LzmaDecodeSize.c was fixed:
+       if _LZMA_IN_CB and _LZMA_OUT_READ were defined,
+       decompressing worked incorrectly.
+
+
+  4.26		 2005-08-05
+  -------------------------
+    - Fixes in 7z_C code and LzmaTest.c:
+      previous versions could work incorrectly,
+      if malloc(0) returns 0
+
+
+  4.23		 2005-06-29
+  -------------------------
+    - Small fixes in C++ code
+
+
+  4.22		 2005-06-10
+  -------------------------
+    - Small fixes
+
+
+  4.21		 2005-06-08
+  -------------------------
+    - Interfaces for ANSI-C LZMA Decoder (LzmaDecode.c) were changed
+    - New additional version of ANSI-C LZMA Decoder with zlib-like interface:
+	- LzmaStateDecode.h
+	- LzmaStateDecode.c
+	- LzmaStateTest.c
+    - ANSI-C LZMA Decoder now can decompress files larger than 4 GB
+
+
+  4.17		 2005-04-18
+  -------------------------
+    - New example for RAM->RAM compressing/decompressing:
+      LZMA + BCJ (filter for x86 code):
+	- LzmaRam.h
+	- LzmaRam.cpp
+	- LzmaRamDecode.h
+	- LzmaRamDecode.c
+	- -f86 switch for lzma.exe
+
+
+  4.16		 2005-03-29
+  -------------------------
+    - Bug was fixed in LzmaDecode.c (ANSI-C LZMA Decoder):
+       If _LZMA_OUT_READ was defined, and if encoded stream was corrupted,
+       decoder could access memory outside of allocated range.
+    - Speed optimization of ANSI-C LZMA Decoder (now it's about 20% faster).
+      Old version of LZMA Decoder now is in file LzmaDecodeSize.c.
+      LzmaDecodeSize.c can provide slightly smaller code than LzmaDecode.c
+    - Small speed optimization in LZMA C++ code
+    - filter for SPARC's code was added
+    - Simplified version of .7z ANSI-C Decoder was included
+
+
+  4.06		 2004-09-05
+  -------------------------
+    - Bug in v4.05 was fixed:
+	LZMA-Encoder didn't release output stream in some cases.
+
+
+  4.05		 2004-08-25
+  -------------------------
+    - Source code of filters for x86, IA-64, ARM, ARM-Thumb
+      and PowerPC code was included to SDK
+    - Some internal minor changes
+
+
+  4.04		 2004-07-28
+  -------------------------
+    - More compatibility with some C++ compilers
+
+
+  4.03		 2004-06-18
+  -------------------------
+    - "Benchmark" command was added. It measures compressing
+      and decompressing speed and shows rating values.
+      Also it checks hardware errors.
+
+
+  4.02		 2004-06-10
+  -------------------------
+    - C++ LZMA Encoder/Decoder code now is more portable
+      and it can be compiled by GCC on Linux.
+
+
+  4.01		 2004-02-15
+  -------------------------
+    - Some detection of data corruption was enabled.
+	LzmaDecode.c / RangeDecoderReadByte
+	.....
+	{
+	  rd->ExtraBytes = 1;
+	  return 0xFF;
+	}
+
+
+  4.00		 2004-02-13
+  -------------------------
+    - Original version of LZMA SDK
+
+
+
+HISTORY of the LZMA
+-------------------
+  2001-2007:  Improvements to LZMA compressing/decompressing code,
+	      keeping compatibility with original LZMA format
+  1996-2001:  Development of LZMA compression format
+
+  Some milestones:
+
+  2001-08-30: LZMA compression was added to 7-Zip
+  1999-01-02: First version of 7-Zip was released
+
+
+End of document
diff --git a/lib_generic/lzma/import_lzmasdk.sh b/lib_generic/lzma/import_lzmasdk.sh
new file mode 100644
index 000000000..5212e4849
--- /dev/null
+++ b/lib_generic/lzma/import_lzmasdk.sh
@@ -0,0 +1,38 @@
+#!/bin/sh
+
+usage() {
+	echo "Usage: $0 lzmaVERSION.tar.bz2" >&2
+	echo >&2
+	exit 1
+}
+
+if [ "$1" = "" ] ; then
+	 usage
+fi
+
+if [ ! -f $1 ] ; then
+	echo "$1 doesn't exist!" >&2
+	exit 1
+fi
+
+BASENAME=`basename $1 .tar.bz2`
+TMPDIR=/tmp/tmp_lib_$BASENAME
+FILES="C/Compress/Lzma/LzmaDecode.h
+      C/Compress/Lzma/LzmaTypes.h
+      C/Compress/Lzma/LzmaDecode.c
+      history.txt
+      LGPL.txt
+      lzma.txt"
+
+
+mkdir -p $TMPDIR
+echo "Untar $1 -> $TMPDIR"
+tar -jxf $1 -C $TMPDIR
+
+for i in $FILES; do
+	echo Copying  $TMPDIR/$i \-\> `basename $i`
+	cp $TMPDIR/$i .
+	chmod -x `basename $i`
+done
+
+echo "done!"
diff --git a/lib_generic/lzma/lzma.txt b/lib_generic/lzma/lzma.txt
new file mode 100644
index 000000000..5f1a0c994
--- /dev/null
+++ b/lib_generic/lzma/lzma.txt
@@ -0,0 +1,663 @@
+LZMA SDK 4.57
+-------------
+
+LZMA SDK   Copyright (C) 1999-2007 Igor Pavlov
+
+LZMA SDK provides the documentation, samples, header files, libraries,
+and tools you need to develop applications that use LZMA compression.
+
+LZMA is default and general compression method of 7z format
+in 7-Zip compression program (www.7-zip.org). LZMA provides high
+compression ratio and very fast decompression.
+
+LZMA is an improved version of famous LZ77 compression algorithm.
+It was improved in way of maximum increasing of compression ratio,
+keeping high decompression speed and low memory requirements for
+decompressing.
+
+
+
+LICENSE
+-------
+
+LZMA SDK is available under any of the following licenses:
+
+1) GNU Lesser General Public License (GNU LGPL)
+2) Common Public License (CPL)
+3) Simplified license for unmodified code (read SPECIAL EXCEPTION)
+4) Proprietary license
+
+It means that you can select one of these four options and follow rules of that license.
+
+
+1,2) GNU LGPL and CPL licenses are pretty similar and both these
+licenses are classified as
+ - "Free software licenses" at http://www.gnu.org/
+ - "OSI-approved" at http://www.opensource.org/
+
+
+3) SPECIAL EXCEPTION
+
+Igor Pavlov, as the author of this code, expressly permits you
+to statically or dynamically link your code (or bind by name)
+to the files from LZMA SDK without subjecting your linked
+code to the terms of the CPL or GNU LGPL.
+Any modifications or additions to files from LZMA SDK, however,
+are subject to the GNU LGPL or CPL terms.
+
+SPECIAL EXCEPTION allows you to use LZMA SDK in applications with closed code,
+while you keep LZMA SDK code unmodified.
+
+
+SPECIAL EXCEPTION #2: Igor Pavlov, as the author of this code, expressly permits
+you to use this code under the same terms and conditions contained in the License
+Agreement you have for any previous version of LZMA SDK developed by Igor Pavlov.
+
+SPECIAL EXCEPTION #2 allows owners of proprietary licenses to use latest version
+of LZMA SDK as update for previous versions.
+
+
+SPECIAL EXCEPTION #3: Igor Pavlov, as the author of this code, expressly permits
+you to use code of the following files:
+BranchTypes.h, LzmaTypes.h, LzmaTest.c, LzmaStateTest.c, LzmaAlone.cpp,
+LzmaAlone.cs, LzmaAlone.java
+as public domain code.
+
+
+4) Proprietary license
+
+LZMA SDK also can be available under a proprietary license which
+can include:
+
+1) Right to modify code without subjecting modified code to the
+terms of the CPL or GNU LGPL
+2) Technical support for code
+
+To request such proprietary license or any additional consultations,
+send email message from that page:
+http://www.7-zip.org/support.html
+
+
+You should have received a copy of the GNU Lesser General Public
+License along with this library; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+
+You should have received a copy of the Common Public License
+along with this library.
+
+
+LZMA SDK Contents
+-----------------
+
+LZMA SDK includes:
+
+  - C++ source code of LZMA compressing and decompressing
+  - ANSI-C compatible source code for LZMA decompressing
+  - C# source code for LZMA compressing and decompressing
+  - Java source code for LZMA compressing and decompressing
+  - Compiled file->file LZMA compressing/decompressing program for Windows system
+
+ANSI-C LZMA decompression code was ported from original C++ sources to C.
+Also it was simplified and optimized for code size.
+But it is fully compatible with LZMA from 7-Zip.
+
+
+UNIX/Linux version
+------------------
+To compile C++ version of file->file LZMA, go to directory
+C/7zip/Compress/LZMA_Alone
+and type "make" or "make clean all" to recompile all.
+
+In some UNIX/Linux versions you must compile LZMA with static libraries.
+To compile with static libraries, change string in makefile
+LIB = -lm
+to string
+LIB = -lm -static
+
+
+Files
+---------------------
+C	 - C source code
+CPP	 - CPP source code
+CS	 - C# source code
+Java	 - Java source code
+lzma.txt - LZMA SDK description (this file)
+7zFormat.txt - 7z Format description
+7zC.txt  - 7z ANSI-C Decoder description (this file)
+methods.txt  - Compression method IDs for .7z
+LGPL.txt - GNU Lesser General Public License
+CPL.html - Common Public License
+lzma.exe - Compiled file->file LZMA encoder/decoder for Windows
+history.txt - history of the LZMA SDK
+
+
+Source code structure
+---------------------
+
+C  - C files
+    Compress - files related to compression/decompression
+      Lz     - files related to LZ (Lempel-Ziv) compression algorithm
+      Lzma   - ANSI-C compatible LZMA decompressor
+
+	LzmaDecode.h  - interface for LZMA decoding on ANSI-C
+	LzmaDecode.c	  - LZMA decoding on ANSI-C (new fastest version)
+	LzmaDecodeSize.c  - LZMA decoding on ANSI-C (old size-optimized version)
+	LzmaTest.c	  - test application that decodes LZMA encoded file
+	LzmaTypes.h	  - basic types for LZMA Decoder
+	LzmaStateDecode.h - interface for LZMA decoding (State version)
+	LzmaStateDecode.c - LZMA decoding on ANSI-C (State version)
+	LzmaStateTest.c   - test application (State version)
+
+      Branch	   - Filters for x86, IA-64, ARM, ARM-Thumb, PowerPC and SPARC code
+
+    Archive - files related to archiving
+      7z_C     - 7z ANSI-C Decoder
+
+
+CPP -- CPP files
+
+  Common  - common files for C++ projects
+  Windows - common files for Windows related code
+  7zip	  - files related to 7-Zip Project
+
+    Common   - common files for 7-Zip
+
+    Compress - files related to compression/decompression
+
+      LZ     - files related to LZ (Lempel-Ziv) compression algorithm
+
+      Copy	   - Copy coder
+      RangeCoder   - Range Coder (special code of compression/decompression)
+      LZMA	   - LZMA compression/decompression on C++
+      LZMA_Alone   - file->file LZMA compression/decompression
+
+      Branch	   - Filters for x86, IA-64, ARM, ARM-Thumb, PowerPC and SPARC code
+
+    Archive - files related to archiving
+
+      Common   - common files for archive handling
+      7z       - 7z C++ Encoder/Decoder
+
+    Bundles    - Modules that are bundles of other modules
+
+      Alone7z		- 7zr.exe: Standalone version of 7z.exe that supports only 7z/LZMA/BCJ/BCJ2
+      Format7zR		- 7zr.dll: Reduced version of 7za.dll: extracting/compressing to 7z/LZMA/BCJ/BCJ2
+      Format7zExtractR	- 7zxr.dll: Reduced version of 7zxa.dll: extracting from 7z/LZMA/BCJ/BCJ2.
+
+    UI	      - User Interface files
+
+      Client7z - Test application for 7za.dll,	7zr.dll, 7zxr.dll
+      Common   - Common UI files
+      Console  - Code for console archiver
+
+
+
+CS - C# files
+  7zip
+    Common   - some common files for 7-Zip
+    Compress - files related to compression/decompression
+      LZ     - files related to LZ (Lempel-Ziv) compression algorithm
+      LZMA	   - LZMA compression/decompression
+      LzmaAlone    - file->file LZMA compression/decompression
+      RangeCoder   - Range Coder (special code of compression/decompression)
+
+Java  - Java files
+  SevenZip
+    Compression    - files related to compression/decompression
+      LZ	   - files related to LZ (Lempel-Ziv) compression algorithm
+      LZMA	   - LZMA compression/decompression
+      RangeCoder   - Range Coder (special code of compression/decompression)
+
+C/C++ source code of LZMA SDK is part of 7-Zip project.
+
+You can find ANSI-C LZMA decompressing code at folder
+  C/7zip/Compress/Lzma
+7-Zip doesn't use that ANSI-C LZMA code and that code was developed
+specially for this SDK. And files from C/7zip/Compress/Lzma do not need
+files from other directories of SDK for compiling.
+
+7-Zip source code can be downloaded from 7-Zip's SourceForge page:
+
+  http://sourceforge.net/projects/sevenzip/
+
+
+LZMA features
+-------------
+  - Variable dictionary size (up to 1 GB)
+  - Estimated compressing speed: about 1 MB/s on 1 GHz CPU
+  - Estimated decompressing speed:
+      - 8-12 MB/s on 1 GHz Intel Pentium 3 or AMD Athlon
+      - 500-1000 KB/s on 100 MHz ARM, MIPS, PowerPC or other simple RISC
+  - Small memory requirements for decompressing (8-32 KB + DictionarySize)
+  - Small code size for decompressing: 2-8 KB (depending from
+    speed optimizations)
+
+LZMA decoder uses only integer operations and can be
+implemented in any modern 32-bit CPU (or on 16-bit CPU with some conditions).
+
+Some critical operations that affect to speed of LZMA decompression:
+  1) 32*16 bit integer multiply
+  2) Misspredicted branches (penalty mostly depends from pipeline length)
+  3) 32-bit shift and arithmetic operations
+
+Speed of LZMA decompressing mostly depends from CPU speed.
+Memory speed has no big meaning. But if your CPU has small data cache,
+overall weight of memory speed will slightly increase.
+
+
+How To Use
+----------
+
+Using LZMA encoder/decoder executable
+--------------------------------------
+
+Usage:	LZMA <e|d> inputFile outputFile [<switches>...]
+
+  e: encode file
+
+  d: decode file
+
+  b: Benchmark. There are two tests: compressing and decompressing
+     with LZMA method. Benchmark shows rating in MIPS (million
+     instructions per second). Rating value is calculated from
+     measured speed and it is normalized with AMD Athlon 64 X2 CPU
+     results. Also Benchmark checks possible hardware errors (RAM
+     errors in most cases). Benchmark uses these settings:
+     (-a1, -d21, -fb32, -mfbt4). You can change only -d. Also you
+     can change number of iterations. Example for 30 iterations:
+       LZMA b 30
+     Default number of iterations is 10.
+
+<Switches>
+
+
+  -a{N}:  set compression mode 0 = fast, 1 = normal
+	  default: 1 (normal)
+
+  d{N}:   Sets Dictionary size - [0, 30], default: 23 (8MB)
+	  The maximum value for dictionary size is 1 GB = 2^30 bytes.
+	  Dictionary size is calculated as DictionarySize = 2^N bytes.
+	  For decompressing file compressed by LZMA method with dictionary
+	  size D = 2^N you need about D bytes of memory (RAM).
+
+  -fb{N}: set number of fast bytes - [5, 273], default: 128
+	  Usually big number gives a little bit better compression ratio
+	  and slower compression process.
+
+  -lc{N}: set number of literal context bits - [0, 8], default: 3
+	  Sometimes lc=4 gives gain for big files.
+
+  -lp{N}: set number of literal pos bits - [0, 4], default: 0
+	  lp switch is intended for periodical data when period is
+	  equal 2^N. For example, for 32-bit (4 bytes)
+	  periodical data you can use lp=2. Often it's better to set lc0,
+	  if you change lp switch.
+
+  -pb{N}: set number of pos bits - [0, 4], default: 2
+	  pb switch is intended for periodical data
+	  when period is equal 2^N.
+
+  -mf{MF_ID}: set Match Finder. Default: bt4.
+	      Algorithms from hc* group doesn't provide good compression
+	      ratio, but they often works pretty fast in combination with
+	      fast mode (-a0).
+
+	      Memory requirements depend from dictionary size
+	      (parameter "d" in table below).
+
+	       MF_ID	 Memory			  Description
+
+		bt2    d *  9.5 + 4MB  Binary Tree with 2 bytes hashing.
+		bt3    d * 11.5 + 4MB  Binary Tree with 3 bytes hashing.
+		bt4    d * 11.5 + 4MB  Binary Tree with 4 bytes hashing.
+		hc4    d *  7.5 + 4MB  Hash Chain with 4 bytes hashing.
+
+  -eos:   write End Of Stream marker. By default LZMA doesn't write
+	  eos marker, since LZMA decoder knows uncompressed size
+	  stored in .lzma file header.
+
+  -si:	  Read data from stdin (it will write End Of Stream marker).
+  -so:	  Write data to stdout
+
+
+Examples:
+
+1) LZMA e file.bin file.lzma -d16 -lc0
+
+compresses file.bin to file.lzma with 64 KB dictionary (2^16=64K)
+and 0 literal context bits. -lc0 allows to reduce memory requirements
+for decompression.
+
+
+2) LZMA e file.bin file.lzma -lc0 -lp2
+
+compresses file.bin to file.lzma with settings suitable
+for 32-bit periodical data (for example, ARM or MIPS code).
+
+3) LZMA d file.lzma file.bin
+
+decompresses file.lzma to file.bin.
+
+
+Compression ratio hints
+-----------------------
+
+Recommendations
+---------------
+
+To increase compression ratio for LZMA compressing it's desirable
+to have aligned data (if it's possible) and also it's desirable to locate
+data in such order, where code is grouped in one place and data is
+grouped in other place (it's better than such mixing: code, data, code,
+data, ...).
+
+
+Using Filters
+-------------
+You can increase compression ratio for some data types, using
+special filters before compressing. For example, it's possible to
+increase compression ratio on 5-10% for code for those CPU ISAs:
+x86, IA-64, ARM, ARM-Thumb, PowerPC, SPARC.
+
+You can find C/C++ source code of such filters in folder "7zip/Compress/Branch"
+
+You can check compression ratio gain of these filters with such
+7-Zip commands (example for ARM code):
+No filter:
+  7z a a1.7z a.bin -m0=lzma
+
+With filter for little-endian ARM code:
+  7z a a2.7z a.bin -m0=bc_arm -m1=lzma
+
+With filter for big-endian ARM code (using additional Swap4 filter):
+  7z a a3.7z a.bin -m0=swap4 -m1=bc_arm -m2=lzma
+
+It works in such manner:
+Compressing    = Filter_encoding + LZMA_encoding
+Decompressing  = LZMA_decoding + Filter_decoding
+
+Compressing and decompressing speed of such filters is very high,
+so it will not increase decompressing time too much.
+Moreover, it reduces decompression time for LZMA_decoding,
+since compression ratio with filtering is higher.
+
+These filters convert CALL (calling procedure) instructions
+from relative offsets to absolute addresses, so such data becomes more
+compressible. Source code of these CALL filters is pretty simple
+(about 20 lines of C++), so you can convert it from C++ version yourself.
+
+For some ISAs (for example, for MIPS) it's impossible to get gain from such filter.
+
+
+LZMA compressed file format
+---------------------------
+Offset Size Description
+  0	1   Special LZMA properties for compressed data
+  1	4   Dictionary size (little endian)
+  5	8   Uncompressed size (little endian). -1 means unknown size
+ 13	    Compressed data
+
+
+ANSI-C LZMA Decoder
+~~~~~~~~~~~~~~~~~~~
+
+To compile ANSI-C LZMA Decoder you can use one of the following files sets:
+1) LzmaDecode.h + LzmaDecode.c + LzmaTest.c  (fastest version)
+2) LzmaDecode.h + LzmaDecodeSize.c + LzmaTest.c  (old size-optimized version)
+3) LzmaStateDecode.h + LzmaStateDecode.c + LzmaStateTest.c  (zlib-like interface)
+
+
+Memory requirements for LZMA decoding
+-------------------------------------
+
+LZMA decoder doesn't allocate memory itself, so you must
+allocate memory and send it to LZMA.
+
+Stack usage of LZMA decoding function for local variables is not
+larger than 200 bytes.
+
+How To decompress data
+----------------------
+
+LZMA Decoder (ANSI-C version) now supports 5 interfaces:
+1) Single-call Decompressing
+2) Single-call Decompressing with input stream callback
+3) Multi-call Decompressing with output buffer
+4) Multi-call Decompressing with input callback and output buffer
+5) Multi-call State Decompressing (zlib-like interface)
+
+Variant-5 is similar to Variant-4, but Variant-5 doesn't use callback functions.
+
+Decompressing steps
+-------------------
+
+1) read LZMA properties (5 bytes):
+   unsigned char properties[LZMA_PROPERTIES_SIZE];
+
+2) read uncompressed size (8 bytes, little-endian)
+
+3) Decode properties:
+
+  CLzmaDecoderState state;  /* it's 24-140 bytes structure, if int is 32-bit */
+
+  if (LzmaDecodeProperties(&state.Properties, properties, LZMA_PROPERTIES_SIZE) != LZMA_RESULT_OK)
+    return PrintError(rs, "Incorrect stream properties");
+
+4) Allocate memory block for internal Structures:
+
+  state.Probs = (CProb *)malloc(LzmaGetNumProbs(&state.Properties) * sizeof(CProb));
+  if (state.Probs == 0)
+    return PrintError(rs, kCantAllocateMessage);
+
+  LZMA decoder uses array of CProb variables as internal structure.
+  By default, CProb is unsigned_short. But you can define _LZMA_PROB32 to make
+  it unsigned_int. It can increase speed on some 32-bit CPUs, but memory
+  usage will be doubled in that case.
+
+
+5) Main Decompressing
+
+You must use one of the following interfaces:
+
+5.1 Single-call Decompressing
+-----------------------------
+When to use: RAM->RAM decompressing
+Compile files: LzmaDecode.h, LzmaDecode.c
+Compile defines: no defines
+Memory Requirements:
+  - Input buffer: compressed size
+  - Output buffer: uncompressed size
+  - LZMA Internal Structures (~16 KB for default settings)
+
+Interface:
+  int res = LzmaDecode(&state,
+      inStream, compressedSize, &inProcessed,
+      outStream, outSize, &outProcessed);
+
+
+5.2 Single-call Decompressing with input stream callback
+--------------------------------------------------------
+When to use: File->RAM or Flash->RAM decompressing.
+Compile files: LzmaDecode.h, LzmaDecode.c
+Compile defines: _LZMA_IN_CB
+Memory Requirements:
+  - Buffer for input stream: any size (for example, 16 KB)
+  - Output buffer: uncompressed size
+  - LZMA Internal Structures (~16 KB for default settings)
+
+Interface:
+  typedef struct _CBuffer
+  {
+    ILzmaInCallback InCallback;
+    FILE *File;
+    unsigned char Buffer[kInBufferSize];
+  } CBuffer;
+
+  int LzmaReadCompressed(void *object, const unsigned char **buffer, SizeT *size)
+  {
+    CBuffer *bo = (CBuffer *)object;
+    *buffer = bo->Buffer;
+    *size = MyReadFile(bo->File, bo->Buffer, kInBufferSize);
+    return LZMA_RESULT_OK;
+  }
+
+  CBuffer g_InBuffer;
+
+  g_InBuffer.File = inFile;
+  g_InBuffer.InCallback.Read = LzmaReadCompressed;
+  int res = LzmaDecode(&state,
+      &g_InBuffer.InCallback,
+      outStream, outSize, &outProcessed);
+
+
+5.3 Multi-call decompressing with output buffer
+-----------------------------------------------
+When to use: RAM->File decompressing
+Compile files: LzmaDecode.h, LzmaDecode.c
+Compile defines: _LZMA_OUT_READ
+Memory Requirements:
+ - Input buffer: compressed size
+ - Buffer for output stream: any size (for example, 16 KB)
+ - LZMA Internal Structures (~16 KB for default settings)
+ - LZMA dictionary (dictionary size is encoded in stream properties)
+
+Interface:
+
+  state.Dictionary = (unsigned char *)malloc(state.Properties.DictionarySize);
+
+  LzmaDecoderInit(&state);
+  do
+  {
+    LzmaDecode(&state,
+      inBuffer, inAvail, &inProcessed,
+      g_OutBuffer, outAvail, &outProcessed);
+    inAvail -= inProcessed;
+    inBuffer += inProcessed;
+  }
+  while you need more bytes
+
+  see LzmaTest.c for more details.
+
+
+5.4 Multi-call decompressing with input callback and output buffer
+------------------------------------------------------------------
+When to use: File->File decompressing
+Compile files: LzmaDecode.h, LzmaDecode.c
+Compile defines: _LZMA_IN_CB, _LZMA_OUT_READ
+Memory Requirements:
+ - Buffer for input stream: any size (for example, 16 KB)
+ - Buffer for output stream: any size (for example, 16 KB)
+ - LZMA Internal Structures (~16 KB for default settings)
+ - LZMA dictionary (dictionary size is encoded in stream properties)
+
+Interface:
+
+  state.Dictionary = (unsigned char *)malloc(state.Properties.DictionarySize);
+
+  LzmaDecoderInit(&state);
+  do
+  {
+    LzmaDecode(&state,
+      &bo.InCallback,
+      g_OutBuffer, outAvail, &outProcessed);
+  }
+  while you need more bytes
+
+  see LzmaTest.c for more details:
+
+
+5.5 Multi-call State Decompressing (zlib-like interface)
+------------------------------------------------------------------
+When to use: file->file decompressing
+Compile files: LzmaStateDecode.h, LzmaStateDecode.c
+Compile defines:
+Memory Requirements:
+ - Buffer for input stream: any size (for example, 16 KB)
+ - Buffer for output stream: any size (for example, 16 KB)
+ - LZMA Internal Structures (~16 KB for default settings)
+ - LZMA dictionary (dictionary size is encoded in stream properties)
+
+Interface:
+
+  state.Dictionary = (unsigned char *)malloc(state.Properties.DictionarySize);
+
+
+  LzmaDecoderInit(&state);
+  do
+  {
+    res = LzmaDecode(&state,
+      inBuffer, inAvail, &inProcessed,
+      g_OutBuffer, outAvail, &outProcessed,
+      finishDecoding);
+    inAvail -= inProcessed;
+    inBuffer += inProcessed;
+  }
+  while you need more bytes
+
+  see LzmaStateTest.c for more details:
+
+
+6) Free all allocated blocks
+
+
+Note
+----
+LzmaDecodeSize.c is size-optimized version of LzmaDecode.c.
+But compiled code of LzmaDecodeSize.c can be larger than
+compiled code of LzmaDecode.c. So it's better to use
+LzmaDecode.c in most cases.
+
+
+EXIT codes
+-----------
+
+LZMA decoder can return one of the following codes:
+
+#define LZMA_RESULT_OK 0
+#define LZMA_RESULT_DATA_ERROR 1
+
+If you use callback function for input data and you return some
+error code, LZMA Decoder also returns that code.
+
+
+
+LZMA Defines
+------------
+
+_LZMA_IN_CB    - Use callback for input data
+
+_LZMA_OUT_READ - Use read function for output data
+
+_LZMA_LOC_OPT  - Enable local speed optimizations inside code.
+		 _LZMA_LOC_OPT is only for LzmaDecodeSize.c (size-optimized version).
+		 _LZMA_LOC_OPT doesn't affect LzmaDecode.c (speed-optimized version)
+		 and LzmaStateDecode.c
+
+_LZMA_PROB32   - It can increase speed on some 32-bit CPUs,
+		 but memory usage will be doubled in that case
+
+_LZMA_UINT32_IS_ULONG  - Define it if int is 16-bit on your compiler
+			 and long is 32-bit.
+
+_LZMA_SYSTEM_SIZE_T  - Define it if you want to use system's size_t.
+		       You can use it to enable 64-bit sizes supporting
+
+
+
+C++ LZMA Encoder/Decoder
+~~~~~~~~~~~~~~~~~~~~~~~~
+C++ LZMA code use COM-like interfaces. So if you want to use it,
+you can study basics of COM/OLE.
+
+By default, LZMA Encoder contains all Match Finders.
+But for compressing it's enough to have just one of them.
+So for reducing size of compressing code you can define:
+  #define COMPRESS_MF_BT
+  #define COMPRESS_MF_BT4
+and it will use only bt4 match finder.
+
+
+---
+
+http://www.7-zip.org
+http://www.7-zip.org/support.html
diff --git a/lib_generic/rbtree.c b/lib_generic/rbtree.c
new file mode 100644
index 000000000..42eab4988
--- /dev/null
+++ b/lib_generic/rbtree.c
@@ -0,0 +1,390 @@
+/*
+  Red Black Trees
+  (C) 1999  Andrea Arcangeli <andrea@suse.de>
+  (C) 2002  David Woodhouse <dwmw2@infradead.org>
+
+  This program is free software; you can redistribute it and/or modify
+  it under the terms of the GNU General Public License as published by
+  the Free Software Foundation; either version 2 of the License, or
+  (at your option) any later version.
+
+  This program is distributed in the hope that it will be useful,
+  but WITHOUT ANY WARRANTY; without even the implied warranty of
+  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+  GNU General Public License for more details.
+
+  You should have received a copy of the GNU General Public License
+  along with this program; if not, write to the Free Software
+  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+
+  linux/lib/rbtree.c
+*/
+
+#include <ubi_uboot.h>
+#include <linux/rbtree.h>
+
+static void __rb_rotate_left(struct rb_node *node, struct rb_root *root)
+{
+	struct rb_node *right = node->rb_right;
+	struct rb_node *parent = rb_parent(node);
+
+	if ((node->rb_right = right->rb_left))
+		rb_set_parent(right->rb_left, node);
+	right->rb_left = node;
+
+	rb_set_parent(right, parent);
+
+	if (parent)
+	{
+		if (node == parent->rb_left)
+			parent->rb_left = right;
+		else
+			parent->rb_right = right;
+	}
+	else
+		root->rb_node = right;
+	rb_set_parent(node, right);
+}
+
+static void __rb_rotate_right(struct rb_node *node, struct rb_root *root)
+{
+	struct rb_node *left = node->rb_left;
+	struct rb_node *parent = rb_parent(node);
+
+	if ((node->rb_left = left->rb_right))
+		rb_set_parent(left->rb_right, node);
+	left->rb_right = node;
+
+	rb_set_parent(left, parent);
+
+	if (parent)
+	{
+		if (node == parent->rb_right)
+			parent->rb_right = left;
+		else
+			parent->rb_left = left;
+	}
+	else
+		root->rb_node = left;
+	rb_set_parent(node, left);
+}
+
+void rb_insert_color(struct rb_node *node, struct rb_root *root)
+{
+	struct rb_node *parent, *gparent;
+
+	while ((parent = rb_parent(node)) && rb_is_red(parent))
+	{
+		gparent = rb_parent(parent);
+
+		if (parent == gparent->rb_left)
+		{
+			{
+				register struct rb_node *uncle = gparent->rb_right;
+				if (uncle && rb_is_red(uncle))
+				{
+					rb_set_black(uncle);
+					rb_set_black(parent);
+					rb_set_red(gparent);
+					node = gparent;
+					continue;
+				}
+			}
+
+			if (parent->rb_right == node)
+			{
+				register struct rb_node *tmp;
+				__rb_rotate_left(parent, root);
+				tmp = parent;
+				parent = node;
+				node = tmp;
+			}
+
+			rb_set_black(parent);
+			rb_set_red(gparent);
+			__rb_rotate_right(gparent, root);
+		} else {
+			{
+				register struct rb_node *uncle = gparent->rb_left;
+				if (uncle && rb_is_red(uncle))
+				{
+					rb_set_black(uncle);
+					rb_set_black(parent);
+					rb_set_red(gparent);
+					node = gparent;
+					continue;
+				}
+			}
+
+			if (parent->rb_left == node)
+			{
+				register struct rb_node *tmp;
+				__rb_rotate_right(parent, root);
+				tmp = parent;
+				parent = node;
+				node = tmp;
+			}
+
+			rb_set_black(parent);
+			rb_set_red(gparent);
+			__rb_rotate_left(gparent, root);
+		}
+	}
+
+	rb_set_black(root->rb_node);
+}
+
+static void __rb_erase_color(struct rb_node *node, struct rb_node *parent,
+			     struct rb_root *root)
+{
+	struct rb_node *other;
+
+	while ((!node || rb_is_black(node)) && node != root->rb_node)
+	{
+		if (parent->rb_left == node)
+		{
+			other = parent->rb_right;
+			if (rb_is_red(other))
+			{
+				rb_set_black(other);
+				rb_set_red(parent);
+				__rb_rotate_left(parent, root);
+				other = parent->rb_right;
+			}
+			if ((!other->rb_left || rb_is_black(other->rb_left)) &&
+			    (!other->rb_right || rb_is_black(other->rb_right)))
+			{
+				rb_set_red(other);
+				node = parent;
+				parent = rb_parent(node);
+			}
+			else
+			{
+				if (!other->rb_right || rb_is_black(other->rb_right))
+				{
+					struct rb_node *o_left;
+					if ((o_left = other->rb_left))
+						rb_set_black(o_left);
+					rb_set_red(other);
+					__rb_rotate_right(other, root);
+					other = parent->rb_right;
+				}
+				rb_set_color(other, rb_color(parent));
+				rb_set_black(parent);
+				if (other->rb_right)
+					rb_set_black(other->rb_right);
+				__rb_rotate_left(parent, root);
+				node = root->rb_node;
+				break;
+			}
+		}
+		else
+		{
+			other = parent->rb_left;
+			if (rb_is_red(other))
+			{
+				rb_set_black(other);
+				rb_set_red(parent);
+				__rb_rotate_right(parent, root);
+				other = parent->rb_left;
+			}
+			if ((!other->rb_left || rb_is_black(other->rb_left)) &&
+			    (!other->rb_right || rb_is_black(other->rb_right)))
+			{
+				rb_set_red(other);
+				node = parent;
+				parent = rb_parent(node);
+			}
+			else
+			{
+				if (!other->rb_left || rb_is_black(other->rb_left))
+				{
+					register struct rb_node *o_right;
+					if ((o_right = other->rb_right))
+						rb_set_black(o_right);
+					rb_set_red(other);
+					__rb_rotate_left(other, root);
+					other = parent->rb_left;
+				}
+				rb_set_color(other, rb_color(parent));
+				rb_set_black(parent);
+				if (other->rb_left)
+					rb_set_black(other->rb_left);
+				__rb_rotate_right(parent, root);
+				node = root->rb_node;
+				break;
+			}
+		}
+	}
+	if (node)
+		rb_set_black(node);
+}
+
+void rb_erase(struct rb_node *node, struct rb_root *root)
+{
+	struct rb_node *child, *parent;
+	int color;
+
+	if (!node->rb_left)
+		child = node->rb_right;
+	else if (!node->rb_right)
+		child = node->rb_left;
+	else
+	{
+		struct rb_node *old = node, *left;
+
+		node = node->rb_right;
+		while ((left = node->rb_left) != NULL)
+			node = left;
+		child = node->rb_right;
+		parent = rb_parent(node);
+		color = rb_color(node);
+
+		if (child)
+			rb_set_parent(child, parent);
+		if (parent == old) {
+			parent->rb_right = child;
+			parent = node;
+		} else
+			parent->rb_left = child;
+
+		node->rb_parent_color = old->rb_parent_color;
+		node->rb_right = old->rb_right;
+		node->rb_left = old->rb_left;
+
+		if (rb_parent(old))
+		{
+			if (rb_parent(old)->rb_left == old)
+				rb_parent(old)->rb_left = node;
+			else
+				rb_parent(old)->rb_right = node;
+		} else
+			root->rb_node = node;
+
+		rb_set_parent(old->rb_left, node);
+		if (old->rb_right)
+			rb_set_parent(old->rb_right, node);
+		goto color;
+	}
+
+	parent = rb_parent(node);
+	color = rb_color(node);
+
+	if (child)
+		rb_set_parent(child, parent);
+	if (parent)
+	{
+		if (parent->rb_left == node)
+			parent->rb_left = child;
+		else
+			parent->rb_right = child;
+	}
+	else
+		root->rb_node = child;
+
+ color:
+	if (color == RB_BLACK)
+		__rb_erase_color(child, parent, root);
+}
+
+/*
+ * This function returns the first node (in sort order) of the tree.
+ */
+struct rb_node *rb_first(struct rb_root *root)
+{
+	struct rb_node	*n;
+
+	n = root->rb_node;
+	if (!n)
+		return NULL;
+	while (n->rb_left)
+		n = n->rb_left;
+	return n;
+}
+
+struct rb_node *rb_last(struct rb_root *root)
+{
+	struct rb_node	*n;
+
+	n = root->rb_node;
+	if (!n)
+		return NULL;
+	while (n->rb_right)
+		n = n->rb_right;
+	return n;
+}
+
+struct rb_node *rb_next(struct rb_node *node)
+{
+	struct rb_node *parent;
+
+	if (rb_parent(node) == node)
+		return NULL;
+
+	/* If we have a right-hand child, go down and then left as far
+	   as we can. */
+	if (node->rb_right) {
+		node = node->rb_right;
+		while (node->rb_left)
+			node=node->rb_left;
+		return node;
+	}
+
+	/* No right-hand children.  Everything down and left is
+	   smaller than us, so any 'next' node must be in the general
+	   direction of our parent. Go up the tree; any time the
+	   ancestor is a right-hand child of its parent, keep going
+	   up. First time it's a left-hand child of its parent, said
+	   parent is our 'next' node. */
+	while ((parent = rb_parent(node)) && node == parent->rb_right)
+		node = parent;
+
+	return parent;
+}
+
+struct rb_node *rb_prev(struct rb_node *node)
+{
+	struct rb_node *parent;
+
+	if (rb_parent(node) == node)
+		return NULL;
+
+	/* If we have a left-hand child, go down and then right as far
+	   as we can. */
+	if (node->rb_left) {
+		node = node->rb_left;
+		while (node->rb_right)
+			node=node->rb_right;
+		return node;
+	}
+
+	/* No left-hand children. Go up till we find an ancestor which
+	   is a right-hand child of its parent */
+	while ((parent = rb_parent(node)) && node == parent->rb_left)
+		node = parent;
+
+	return parent;
+}
+
+void rb_replace_node(struct rb_node *victim, struct rb_node *new,
+		     struct rb_root *root)
+{
+	struct rb_node *parent = rb_parent(victim);
+
+	/* Set the surrounding nodes to point to the replacement */
+	if (parent) {
+		if (victim == parent->rb_left)
+			parent->rb_left = new;
+		else
+			parent->rb_right = new;
+	} else {
+		root->rb_node = new;
+	}
+	if (victim->rb_left)
+		rb_set_parent(victim->rb_left, new);
+	if (victim->rb_right)
+		rb_set_parent(victim->rb_right, new);
+
+	/* Copy the pointers/colour from the victim to the replacement */
+	*new = *victim;
+}
diff --git a/lib_generic/strmhz.c b/lib_generic/strmhz.c
index d0b6bc60d..d6da1d136 100644
--- a/lib_generic/strmhz.c
+++ b/lib_generic/strmhz.c
@@ -27,9 +27,11 @@ char *strmhz (char *buf, long hz)
 	long l, n;
 	long m;
 
-	n = hz / 1000000L;
+	n = DIV_ROUND(hz, 1000) / 1000L;
 	l = sprintf (buf, "%ld", n);
-	m = (hz % 1000000L) / 1000L;
+
+	hz -= n * 1000000L;
+	m = DIV_ROUND(hz, 1000L);
 	if (m != 0)
 		sprintf (buf + l, ".%03ld", m);
 	return (buf);
diff --git a/lib_generic/vsprintf.c b/lib_generic/vsprintf.c
index 7c9cfe16c..767dde1ba 100644
--- a/lib_generic/vsprintf.c
+++ b/lib_generic/vsprintf.c
@@ -55,7 +55,30 @@ long simple_strtol(const char *cp,char **endp,unsigned int base)
 	return simple_strtoul(cp,endp,base);
 }
 
-#ifdef CFG_64BIT_STRTOUL
+int ustrtoul(const char *cp, char **endp, unsigned int base)
+{
+	unsigned long result = simple_strtoul(cp, endp, base);
+	switch (**endp) {
+	case 'G' :
+		result *= 1024;
+		/* fall through */
+	case 'M':
+		result *= 1024;
+		/* fall through */
+	case 'K':
+	case 'k':
+		result *= 1024;
+		if ((*endp)[1] == 'i') {
+			if ((*endp)[2] == 'B')
+				(*endp) += 3;
+			else
+				(*endp) += 2;
+		}
+	}
+	return result;
+}
+
+#ifdef CONFIG_SYS_64BIT_STRTOUL
 unsigned long long simple_strtoull (const char *cp, char **endp, unsigned int base)
 {
 	unsigned long long result = 0, value;
@@ -83,7 +106,7 @@ unsigned long long simple_strtoull (const char *cp, char **endp, unsigned int ba
 		*endp = (char *) cp;
 	return result;
 }
-#endif /* CFG_64BIT_STRTOUL */
+#endif /* CONFIG_SYS_64BIT_STRTOUL */
 
 /* we use this so that we can do without the ctype library */
 #define is_digit(c)	((c) >= '0' && (c) <= '9')
@@ -105,7 +128,7 @@ static int skip_atoi(const char **s)
 #define SPECIAL	32		/* 0x */
 #define LARGE	64		/* use 'ABCDEF' instead of 'abcdef' */
 
-#ifdef CFG_64BIT_VSPRINTF
+#ifdef CONFIG_SYS_64BIT_VSPRINTF
 #define do_div(n,base) ({ \
 	unsigned int __res; \
 	__res = ((unsigned long long) n) % base; \
@@ -121,7 +144,7 @@ static int skip_atoi(const char **s)
 })
 #endif
 
-#ifdef CFG_64BIT_VSPRINTF
+#ifdef CONFIG_SYS_64BIT_VSPRINTF
 static char * number(char * str, long long num, unsigned int base, int size, int precision ,int type)
 #else
 static char * number(char * str, long num, unsigned int base, int size, int precision ,int type)
@@ -197,7 +220,7 @@ int sprintf(char * buf, const char *fmt, ...);
 int vsprintf(char *buf, const char *fmt, va_list args)
 {
 	int len;
-#ifdef CFG_64BIT_VSPRINTF
+#ifdef CONFIG_SYS_64BIT_VSPRINTF
 	unsigned long long num;
 #else
 	unsigned long num;
@@ -352,7 +375,7 @@ int vsprintf(char *buf, const char *fmt, va_list args)
 				--fmt;
 			continue;
 		}
-#ifdef CFG_64BIT_VSPRINTF
+#ifdef CONFIG_SYS_64BIT_VSPRINTF
 		if (qualifier == 'q')  /* "quad" for 64 bit variables */
 			num = va_arg(args, unsigned long long);
 		else
diff --git a/lib_i386/bios_setup.c b/lib_i386/bios_setup.c
index 75f04a01f..33c842c6a 100644
--- a/lib_i386/bios_setup.c
+++ b/lib_i386/bios_setup.c
@@ -140,8 +140,9 @@ int bios_setup(void)
 {
 	static int done=0;
 	int vector;
+#ifdef CONFIG_PCI
 	struct pci_controller *pri_hose;
-
+#endif
 	if (done) {
 		return 0;
 	}
@@ -223,12 +224,13 @@ int bios_setup(void)
 	 * (This, ofcause break on multi hose systems,
 	 *  but our PCI BIOS only support one hose anyway)
 	 */
+#ifdef CONFIG_PCI
 	pri_hose = pci_bus_to_hose(0);
 	if (NULL != pri_hose) {
 		/* fill in last pci bus number for use by the realmode
 		 * PCI BIOS */
 		RELOC_16_BYTE(0xf000, pci_last_bus) = pri_hose->last_busno;
 	}
-
+#endif
 	return 0;
 }
diff --git a/lib_i386/board.c b/lib_i386/board.c
index 55fa42af4..1734f86cd 100644
--- a/lib_i386/board.c
+++ b/lib_i386/board.c
@@ -32,6 +32,7 @@
 #include <watchdog.h>
 #include <command.h>
 #include <devices.h>
+#include <timestamp.h>
 #include <version.h>
 #include <malloc.h>
 #include <net.h>
@@ -70,7 +71,7 @@ ulong i386boot_bios_size     = (ulong)&_i386boot_bios_size;     /* size of BIOS
 
 
 const char version_string[] =
-	U_BOOT_VERSION" (" __DATE__ " - " __TIME__ ")";
+	U_BOOT_VERSION" (" U_BOOT_DATE " - " U_BOOT_TIME ")";
 
 
 /*
@@ -84,7 +85,7 @@ static int mem_malloc_init(void)
 {
 	/* start malloc area right after the stack */
 	mem_malloc_start = i386boot_bss_start +
-		i386boot_bss_size + CFG_STACK_SIZE;
+		i386boot_bss_size + CONFIG_SYS_STACK_SIZE;
 	mem_malloc_start = (mem_malloc_start+3)&~3;
 
 	/* Use all available RAM for malloc() */
@@ -137,7 +138,7 @@ static int display_banner (void)
 		i386boot_romdata_dest, i386boot_romdata_dest+i386boot_romdata_size-1,
 		i386boot_bss_start, i386boot_bss_start+i386boot_bss_size-1,
 		i386boot_bss_start+i386boot_bss_size,
-		i386boot_bss_start+i386boot_bss_size+CFG_STACK_SIZE-1);
+		i386boot_bss_start+i386boot_bss_size+CONFIG_SYS_STACK_SIZE-1);
 
 
 	return (0);
@@ -213,7 +214,7 @@ init_fnc_t *init_sequence[] = {
 	NULL,
 };
 
-gd_t *global_data;
+gd_t *gd;
 
 void start_i386boot (void)
 {
@@ -226,7 +227,7 @@ void start_i386boot (void)
 
 	show_boot_progress(0x21);
 
-	gd = global_data = &gd_data;
+	gd = &gd_data;
 	/* compiler optimization barrier needed for GCC >= 3.4 */
 	__asm__ __volatile__("": : :"memory");
 
@@ -266,7 +267,7 @@ void start_i386boot (void)
 		int i;
 		ulong reg;
 		char *s, *e;
-		uchar tmp[64];
+		char tmp[64];
 
 		i = getenv_r ("ethaddr", tmp, sizeof (tmp));
 		s = (i > 0) ? tmp : NULL;
@@ -412,7 +413,10 @@ void hang (void)
 unsigned long do_go_exec (ulong (*entry)(int, char *[]), int argc, char *argv[])
 {
 	/*
-	 * Nios function pointers are address >> 1
+	 * TODO: Test this function - changed to fix compiler error.
+	 * Original code was:
+	 *   return (entry >> 1) (argc, argv);
+	 * with a comment about Nios function pointers are address >> 1
 	 */
-	return (entry >> 1) (argc, argv);
+	return (entry) (argc, argv);
 }
diff --git a/lib_i386/bootm.c b/lib_i386/bootm.c
index 522d7ad8e..ea19b3de9 100644
--- a/lib_i386/bootm.c
+++ b/lib_i386/bootm.c
@@ -34,12 +34,15 @@ int do_bootm_linux(int flag, int argc, char *argv[], bootm_headers_t *images)
 	void		*base_ptr;
 	ulong		os_data, os_len;
 	image_header_t	*hdr;
-	int		ret;
+
 #if defined(CONFIG_FIT)
 	const void	*data;
 	size_t		len;
 #endif
 
+	if ((flag != 0) && (flag != BOOTM_STATE_OS_GO))
+		return 1;
+
 	if (images->legacy_hdr_valid) {
 		hdr = images->legacy_hdr_os;
 		if (image_check_type (hdr, IH_TYPE_MULTI)) {
diff --git a/lib_i386/video_bios.c b/lib_i386/video_bios.c
index 45f78e22f..ce96a3e05 100644
--- a/lib_i386/video_bios.c
+++ b/lib_i386/video_bios.c
@@ -136,6 +136,8 @@ static u32 probe_pci_video(void)
 
 #endif
 
+#ifdef CONFIG_VIDEO
+
 static int probe_isa_video(void)
 {
 	u32 ptr;
@@ -217,3 +219,4 @@ int video_bios_init(void)
 	return 1;
 
 }
+#endif
diff --git a/lib_m68k/board.c b/lib_m68k/board.c
index 4fee35aea..583ce1072 100644
--- a/lib_m68k/board.c
+++ b/lib_m68k/board.c
@@ -49,7 +49,7 @@
 #if defined(CONFIG_CMD_BEDBUG)
 #include <cmd_bedbug.h>
 #endif
-#ifdef CFG_ALLOC_DPRAM
+#ifdef CONFIG_SYS_ALLOC_DPRAM
 #include <commproc.h>
 #endif
 #include <version.h>
@@ -75,12 +75,12 @@ extern flash_info_t flash_info[];
 
 #include <environment.h>
 
-#if ( ((CFG_ENV_ADDR+CFG_ENV_SIZE) < CFG_MONITOR_BASE) || \
-      (CFG_ENV_ADDR >= (CFG_MONITOR_BASE + CFG_MONITOR_LEN)) ) || \
-    defined(CFG_ENV_IS_IN_NVRAM)
-#define	TOTAL_MALLOC_LEN	(CFG_MALLOC_LEN + CFG_ENV_SIZE)
+#if ( ((CONFIG_ENV_ADDR+CONFIG_ENV_SIZE) < CONFIG_SYS_MONITOR_BASE) || \
+      (CONFIG_ENV_ADDR >= (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)) ) || \
+    defined(CONFIG_ENV_IS_IN_NVRAM)
+#define	TOTAL_MALLOC_LEN	(CONFIG_SYS_MALLOC_LEN + CONFIG_ENV_SIZE)
 #else
-#define	TOTAL_MALLOC_LEN	CFG_MALLOC_LEN
+#define	TOTAL_MALLOC_LEN	CONFIG_SYS_MALLOC_LEN
 #endif
 
 extern ulong __init_end;
@@ -118,7 +118,7 @@ static	ulong	mem_malloc_brk	 = 0;
  */
 static void mem_malloc_init (void)
 {
-	ulong dest_addr = CFG_MONITOR_BASE + gd->reloc_off;
+	ulong dest_addr = CONFIG_SYS_MONITOR_BASE + gd->reloc_off;
 
 	mem_malloc_end = dest_addr;
 	mem_malloc_start = dest_addr - TOTAL_MALLOC_LEN;
@@ -195,7 +195,7 @@ static int init_func_ram (void)
 static int init_func_i2c (void)
 {
 	puts ("I2C:   ");
-	i2c_init (CFG_I2C_SPEED, CFG_I2C_SLAVE);
+	i2c_init (CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
 	puts ("ready\n");
 	return (0);
 }
@@ -234,9 +234,9 @@ init_fnc_t *init_sequence[] = {
 	init_func_spi,
 #endif
 	init_func_ram,
-#if defined(CFG_DRAM_TEST)
+#if defined(CONFIG_SYS_DRAM_TEST)
 	testdram,
-#endif /* CFG_DRAM_TEST */
+#endif /* CONFIG_SYS_DRAM_TEST */
 	INIT_FUNC_WATCHDOG_INIT
 	NULL,			/* Terminate this list */
 };
@@ -273,7 +273,7 @@ board_init_f (ulong bootflag)
 #endif
 
 	/* Pointer is writable since we allocated a register for it */
-	gd = (gd_t *) (CFG_INIT_RAM_ADDR + CFG_GBL_DATA_OFFSET);
+	gd = (gd_t *) (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET);
 	/* compiler optimization barrier needed for GCC >= 3.4 */
 	__asm__ __volatile__("": : :"memory");
 
@@ -296,9 +296,9 @@ board_init_f (ulong bootflag)
 	 *	- monitor code
 	 *	- board info struct
 	 */
-	len = (ulong)&_end - CFG_MONITOR_BASE;
+	len = (ulong)&_end - CONFIG_SYS_MONITOR_BASE;
 
-	addr = CFG_SDRAM_BASE + gd->ram_size;
+	addr = CONFIG_SYS_SDRAM_BASE + gd->ram_size;
 
 #ifdef CONFIG_LOGBUFFER
 	/* reserve kernel log buffer */
@@ -357,10 +357,10 @@ board_init_f (ulong bootflag)
 			sizeof (gd_t), addr_sp);
 
 	/* Reserve memory for boot params. */
-	addr_sp -= CFG_BOOTPARAMS_LEN;
+	addr_sp -= CONFIG_SYS_BOOTPARAMS_LEN;
 	bd->bi_boot_params = addr_sp;
 	debug ("Reserving %dk for boot parameters at: %08lx\n",
-			CFG_BOOTPARAMS_LEN >> 10, addr_sp);
+			CONFIG_SYS_BOOTPARAMS_LEN >> 10, addr_sp);
 
 	/*
 	 * Finally, we set up a new (bigger) stack.
@@ -381,13 +381,13 @@ board_init_f (ulong bootflag)
 	/*
 	 * Save local variables to board info struct
 	 */
-	bd->bi_memstart  = CFG_SDRAM_BASE;	/* start of  DRAM memory      */
+	bd->bi_memstart  = CONFIG_SYS_SDRAM_BASE;	/* start of  DRAM memory      */
 	bd->bi_memsize   = gd->ram_size;	/* size  of  DRAM memory in bytes */
-#ifdef CFG_INIT_RAM_ADDR
-	bd->bi_sramstart = CFG_INIT_RAM_ADDR;	/* start of  SRAM memory	*/
-	bd->bi_sramsize  = CFG_INIT_RAM_END;	/* size  of  SRAM memory	*/
+#ifdef CONFIG_SYS_INIT_RAM_ADDR
+	bd->bi_sramstart = CONFIG_SYS_INIT_RAM_ADDR;	/* start of  SRAM memory	*/
+	bd->bi_sramsize  = CONFIG_SYS_INIT_RAM_END;	/* size  of  SRAM memory	*/
 #endif
-	bd->bi_mbar_base = CFG_MBAR;		/* base of internal registers */
+	bd->bi_mbar_base = CONFIG_SYS_MBAR;		/* base of internal registers */
 
 	bd->bi_bootflags = bootflag;		/* boot / reboot flag (for LynxOS)    */
 
@@ -404,7 +404,7 @@ board_init_f (ulong bootflag)
 #endif
 	bd->bi_baudrate = gd->baudrate;	/* Console Baudrate     */
 
-#ifdef CFG_EXTBDINFO
+#ifdef CONFIG_SYS_EXTBDINFO
 	strncpy (bd->bi_s_version, "1.2", sizeof (bd->bi_s_version));
 	strncpy (bd->bi_r_version, U_BOOT_VERSION, sizeof (bd->bi_r_version));
 #endif
@@ -420,7 +420,7 @@ board_init_f (ulong bootflag)
 
 	memcpy (id, (void *)gd, sizeof (gd_t));
 
-	debug ("Start relocate of code from %08x to %08lx\n", CFG_MONITOR_BASE, addr);
+	debug ("Start relocate of code from %08x to %08lx\n", CONFIG_SYS_MONITOR_BASE, addr);
 	relocate_code (addr_sp, id, addr);
 
 	/* NOTREACHED - jump_to_ram() does not return */
@@ -443,10 +443,10 @@ void board_init_r (gd_t *id, ulong dest_addr)
 	int i;
 	extern void malloc_bin_reloc (void);
 
-#ifndef CFG_ENV_IS_NOWHERE
+#ifndef CONFIG_ENV_IS_NOWHERE
 	extern char * env_name_spec;
 #endif
-#ifndef CFG_NO_FLASH
+#ifndef CONFIG_SYS_NO_FLASH
 	ulong flash_size;
 #endif
 	gd = id;		/* initialize RAM version of global data */
@@ -462,7 +462,7 @@ void board_init_r (gd_t *id, ulong dest_addr)
 
 	WATCHDOG_RESET ();
 
-	gd->reloc_off =  dest_addr - CFG_MONITOR_BASE;
+	gd->reloc_off =  dest_addr - CONFIG_SYS_MONITOR_BASE;
 
 	monitor_flash_len = (ulong)&__init_end - dest_addr;
 
@@ -486,7 +486,7 @@ void board_init_r (gd_t *id, ulong dest_addr)
 			addr = (ulong)(cmdtp->usage) + gd->reloc_off;
 			cmdtp->usage = (char *)addr;
 		}
-#ifdef	CFG_LONGHELP
+#ifdef	CONFIG_SYS_LONGHELP
 		if (cmdtp->help) {
 			addr = (ulong)(cmdtp->help) + gd->reloc_off;
 			cmdtp->help = (char *)addr;
@@ -494,7 +494,7 @@ void board_init_r (gd_t *id, ulong dest_addr)
 #endif
 	}
 	/* there are some other pointer constants we must deal with */
-#ifndef CFG_ENV_IS_NOWHERE
+#ifndef CONFIG_ENV_IS_NOWHERE
 	env_name_spec += gd->reloc_off;
 #endif
 
@@ -517,13 +517,13 @@ void board_init_r (gd_t *id, ulong dest_addr)
 	/*
 	 * Setup trap handlers
 	 */
-	trap_init (CFG_SDRAM_BASE);
+	trap_init (CONFIG_SYS_SDRAM_BASE);
 
-#if !defined(CFG_NO_FLASH)
+#if !defined(CONFIG_SYS_NO_FLASH)
 	puts ("FLASH: ");
 
 	if ((flash_size = flash_init ()) > 0) {
-# ifdef CFG_FLASH_CHECKSUM
+# ifdef CONFIG_SYS_FLASH_CHECKSUM
 		print_size (flash_size, "");
 		/*
 		 * Compute and print flash CRC if flashchecksum is set to 'y'
@@ -534,27 +534,27 @@ void board_init_r (gd_t *id, ulong dest_addr)
 		if (s && (*s == 'y')) {
 			printf ("  CRC: %08lX",
 					crc32 (0,
-						   (const unsigned char *) CFG_FLASH_BASE,
+						   (const unsigned char *) CONFIG_SYS_FLASH_BASE,
 						   flash_size)
 					);
 		}
 		putc ('\n');
-# else	/* !CFG_FLASH_CHECKSUM */
+# else	/* !CONFIG_SYS_FLASH_CHECKSUM */
 		print_size (flash_size, "\n");
-# endif /* CFG_FLASH_CHECKSUM */
+# endif /* CONFIG_SYS_FLASH_CHECKSUM */
 	} else {
 		puts (failed);
 		hang ();
 	}
 
-	bd->bi_flashstart = CFG_FLASH_BASE;	/* update start of FLASH memory    */
+	bd->bi_flashstart = CONFIG_SYS_FLASH_BASE;	/* update start of FLASH memory    */
 	bd->bi_flashsize = flash_size;	/* size of FLASH memory (final value) */
 	bd->bi_flashoffset = 0;
-#else	/* CFG_NO_FLASH */
+#else	/* CONFIG_SYS_NO_FLASH */
 	bd->bi_flashsize = 0;
 	bd->bi_flashstart = 0;
 	bd->bi_flashoffset = 0;
-#endif /* !CFG_NO_FLASH */
+#endif /* !CONFIG_SYS_NO_FLASH */
 
 	WATCHDOG_RESET ();
 
@@ -568,7 +568,7 @@ void board_init_r (gd_t *id, ulong dest_addr)
 	malloc_bin_reloc ();
 
 #ifdef CONFIG_SPI
-# if !defined(CFG_ENV_IS_IN_EEPROM)
+# if !defined(CONFIG_ENV_IS_IN_EEPROM)
 	spi_init_f ();
 # endif
 	spi_init_r ();
diff --git a/lib_m68k/bootm.c b/lib_m68k/bootm.c
index 6504cc917..0798e07e3 100644
--- a/lib_m68k/bootm.c
+++ b/lib_m68k/bootm.c
@@ -43,28 +43,16 @@ DECLARE_GLOBAL_DATA_PTR;
 static ulong get_sp (void);
 static void set_clocks_in_mhz (bd_t *kbd);
 
-int do_bootm_linux(int flag, int argc, char *argv[], bootm_headers_t *images)
+void arch_lmb_reserve(struct lmb *lmb)
 {
 	ulong sp;
 
-	ulong rd_len;
-	ulong initrd_start, initrd_end;
-	int ret;
-
-	ulong cmd_start, cmd_end;
-	ulong bootmap_base;
-	bd_t  *kbd;
-	void  (*kernel) (bd_t *, ulong, ulong, ulong, ulong);
-	struct lmb *lmb = &images->lmb;
-
-	bootmap_base = getenv_bootm_low();
-
 	/*
 	 * Booting a (Linux) kernel image
 	 *
 	 * Allocate space for command line and board info - the
 	 * address should be as high as possible within the reach of
-	 * the kernel (see CFG_BOOTMAPSZ settings), but in unused
+	 * the kernel (see CONFIG_SYS_BOOTMAPSZ settings), but in unused
 	 * memory, which means far enough below the current stack
 	 * pointer.
 	 */
@@ -73,7 +61,25 @@ int do_bootm_linux(int flag, int argc, char *argv[], bootm_headers_t *images)
 
 	/* adjust sp by 1K to be safe */
 	sp -= 1024;
-	lmb_reserve(lmb, sp, (CFG_SDRAM_BASE + gd->ram_size - sp));
+	lmb_reserve(lmb, sp, (CONFIG_SYS_SDRAM_BASE + gd->ram_size - sp));
+}
+
+int do_bootm_linux(int flag, int argc, char *argv[], bootm_headers_t *images)
+{
+	ulong rd_len;
+	ulong initrd_start, initrd_end;
+	int ret;
+
+	ulong cmd_start, cmd_end;
+	ulong bootmap_base;
+	bd_t  *kbd;
+	void  (*kernel) (bd_t *, ulong, ulong, ulong, ulong);
+	struct lmb *lmb = &images->lmb;
+
+	if ((flag != 0) && (flag != BOOTM_STATE_OS_GO))
+		return 1;
+
+	bootmap_base = getenv_bootm_low();
 
 	/* allocate space and init command line */
 	ret = boot_get_cmdline (lmb, &cmd_start, &cmd_end, bootmap_base);
diff --git a/lib_m68k/interrupts.c b/lib_m68k/interrupts.c
index 1635d6fed..2dc079bee 100644
--- a/lib_m68k/interrupts.c
+++ b/lib_m68k/interrupts.c
@@ -29,7 +29,7 @@
 #include <asm/processor.h>
 #include <asm/immap.h>
 
-#define	NR_IRQS		(CFG_NUM_IRQS)
+#define	NR_IRQS		(CONFIG_SYS_NUM_IRQS)
 
 /*
  * Interrupt vector functions.
diff --git a/lib_m68k/time.c b/lib_m68k/time.c
index 6eba784b5..697d67edc 100644
--- a/lib_m68k/time.c
+++ b/lib_m68k/time.c
@@ -33,18 +33,18 @@ DECLARE_GLOBAL_DATA_PTR;
 static ulong timestamp;
 
 #if defined(CONFIG_MCFTMR)
-#ifndef CFG_UDELAY_BASE
+#ifndef CONFIG_SYS_UDELAY_BASE
 #	error	"uDelay base not defined!"
 #endif
 
-#if !defined(CFG_TMR_BASE) || !defined(CFG_INTR_BASE) || !defined(CFG_TMRINTR_NO) || !defined(CFG_TMRINTR_MASK)
+#if !defined(CONFIG_SYS_TMR_BASE) || !defined(CONFIG_SYS_INTR_BASE) || !defined(CONFIG_SYS_TMRINTR_NO) || !defined(CONFIG_SYS_TMRINTR_MASK)
 #	error	"TMR_BASE, INTR_BASE, TMRINTR_NO or TMRINTR_MASk not defined!"
 #endif
 extern void dtimer_intr_setup(void);
 
 void udelay(unsigned long usec)
 {
-	volatile dtmr_t *timerp = (dtmr_t *) (CFG_UDELAY_BASE);
+	volatile dtmr_t *timerp = (dtmr_t *) (CONFIG_SYS_UDELAY_BASE);
 	uint start, now, tmp;
 
 	while (usec > 0) {
@@ -59,7 +59,7 @@ void udelay(unsigned long usec)
 		timerp->tcn = 0;
 		/* set period to 1 us */
 		timerp->tmr =
-		    CFG_TIMER_PRESCALER | DTIM_DTMR_CLK_DIV1 | DTIM_DTMR_FRR |
+		    CONFIG_SYS_TIMER_PRESCALER | DTIM_DTMR_CLK_DIV1 | DTIM_DTMR_FRR |
 		    DTIM_DTMR_RST_EN;
 
 		start = now = timerp->tcn;
@@ -70,10 +70,10 @@ void udelay(unsigned long usec)
 
 void dtimer_interrupt(void *not_used)
 {
-	volatile dtmr_t *timerp = (dtmr_t *) (CFG_TMR_BASE);
+	volatile dtmr_t *timerp = (dtmr_t *) (CONFIG_SYS_TMR_BASE);
 
 	/* check for timer interrupt asserted */
-	if ((CFG_TMRPND_REG & CFG_TMRINTR_MASK) == CFG_TMRINTR_PEND) {
+	if ((CONFIG_SYS_TMRPND_REG & CONFIG_SYS_TMRINTR_MASK) == CONFIG_SYS_TMRINTR_PEND) {
 		timerp->ter = (DTIM_DTER_CAP | DTIM_DTER_REF);
 		timestamp++;
 		return;
@@ -82,7 +82,7 @@ void dtimer_interrupt(void *not_used)
 
 void timer_init(void)
 {
-	volatile dtmr_t *timerp = (dtmr_t *) (CFG_TMR_BASE);
+	volatile dtmr_t *timerp = (dtmr_t *) (CONFIG_SYS_TMR_BASE);
 
 	timestamp = 0;
 
@@ -93,7 +93,7 @@ void timer_init(void)
 	timerp->tmr = DTIM_DTMR_RST_RST;
 
 	/* initialize and enable timer interrupt */
-	irq_install_handler(CFG_TMRINTR_NO, dtimer_interrupt, 0);
+	irq_install_handler(CONFIG_SYS_TMRINTR_NO, dtimer_interrupt, 0);
 
 	timerp->tcn = 0;
 	timerp->trr = 1000;	/* Interrupt every ms */
@@ -101,7 +101,7 @@ void timer_init(void)
 	dtimer_intr_setup();
 
 	/* set a period of 1us, set timer mode to restart and enable timer and interrupt */
-	timerp->tmr = CFG_TIMER_PRESCALER | DTIM_DTMR_CLK_DIV1 |
+	timerp->tmr = CONFIG_SYS_TIMER_PRESCALER | DTIM_DTMR_CLK_DIV1 |
 	    DTIM_DTMR_FRR | DTIM_DTMR_ORRI | DTIM_DTMR_RST_EN;
 }
 
@@ -122,15 +122,15 @@ void set_timer(ulong t)
 #endif				/* CONFIG_MCFTMR */
 
 #if defined(CONFIG_MCFPIT)
-#if !defined(CFG_PIT_BASE)
-#	error	"CFG_PIT_BASE not defined!"
+#if !defined(CONFIG_SYS_PIT_BASE)
+#	error	"CONFIG_SYS_PIT_BASE not defined!"
 #endif
 
 static unsigned short lastinc;
 
 void udelay(unsigned long usec)
 {
-	volatile pit_t *timerp = (pit_t *) (CFG_UDELAY_BASE);
+	volatile pit_t *timerp = (pit_t *) (CONFIG_SYS_UDELAY_BASE);
 	uint tmp;
 
 	while (usec > 0) {
@@ -144,7 +144,7 @@ void udelay(unsigned long usec)
 		timerp->pcsr = PIT_PCSR_OVW;
 		timerp->pmr = 0;
 		/* set period to 1 us */
-		timerp->pcsr |= PIT_PCSR_PRE(CFG_PIT_PRESCALE) | PIT_PCSR_EN;
+		timerp->pcsr |= PIT_PCSR_PRE(CONFIG_SYS_PIT_PRESCALE) | PIT_PCSR_EN;
 
 		timerp->pmr = tmp;
 		while (timerp->pcntr > 0) ;
@@ -153,18 +153,18 @@ void udelay(unsigned long usec)
 
 void timer_init(void)
 {
-	volatile pit_t *timerp = (pit_t *) (CFG_PIT_BASE);
+	volatile pit_t *timerp = (pit_t *) (CONFIG_SYS_PIT_BASE);
 	timestamp = 0;
 
 	/* Set up TIMER 4 as poll clock */
 	timerp->pcsr = PIT_PCSR_OVW;
 	timerp->pmr = lastinc = 0;
-	timerp->pcsr |= PIT_PCSR_PRE(CFG_PIT_PRESCALE) | PIT_PCSR_EN;
+	timerp->pcsr |= PIT_PCSR_PRE(CONFIG_SYS_PIT_PRESCALE) | PIT_PCSR_EN;
 }
 
 void set_timer(ulong t)
 {
-	volatile pit_t *timerp = (pit_t *) (CFG_PIT_BASE);
+	volatile pit_t *timerp = (pit_t *) (CONFIG_SYS_PIT_BASE);
 
 	timestamp = 0;
 	timerp->pmr = lastinc = 0;
@@ -173,7 +173,7 @@ void set_timer(ulong t)
 ulong get_timer(ulong base)
 {
 	unsigned short now, diff;
-	volatile pit_t *timerp = (pit_t *) (CFG_PIT_BASE);
+	volatile pit_t *timerp = (pit_t *) (CONFIG_SYS_PIT_BASE);
 
 	now = timerp->pcntr;
 	diff = -(now - lastinc);
@@ -211,6 +211,6 @@ unsigned long usec2ticks(unsigned long usec)
 ulong get_tbclk(void)
 {
 	ulong tbclk;
-	tbclk = CFG_HZ;
+	tbclk = CONFIG_SYS_HZ;
 	return tbclk;
 }
diff --git a/lib_microblaze/board.c b/lib_microblaze/board.c
index 09d4d943d..4f48341f3 100644
--- a/lib_microblaze/board.c
+++ b/lib_microblaze/board.c
@@ -27,17 +27,18 @@
 #include <common.h>
 #include <command.h>
 #include <malloc.h>
+#include <timestamp.h>
 #include <version.h>
 #include <watchdog.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
-const char version_string[] = U_BOOT_VERSION " (" __DATE__ " - " __TIME__ ")";
+const char version_string[] = U_BOOT_VERSION " ("U_BOOT_DATE" - "U_BOOT_TIME")";
 
-#ifdef CFG_GPIO_0
+#ifdef CONFIG_SYS_GPIO_0
 extern int gpio_init (void);
 #endif
-#ifdef CFG_INTC_0
+#ifdef CONFIG_SYS_INTC_0
 extern int interrupts_init (void);
 #endif
 #if defined(CONFIG_CMD_NET)
@@ -54,13 +55,13 @@ static ulong mem_malloc_brk;
 
 /*
  * The Malloc area is immediately below the monitor copy in DRAM
- * aka CFG_MONITOR_BASE - Note there is no need for reloc_off
+ * aka CONFIG_SYS_MONITOR_BASE - Note there is no need for reloc_off
  * as our monitory code is run from SDRAM
  */
 static void mem_malloc_init (void)
 {
-	mem_malloc_end = (CFG_MALLOC_BASE + CFG_MALLOC_LEN);
-	mem_malloc_start = CFG_MALLOC_BASE;
+	mem_malloc_end = (CONFIG_SYS_MALLOC_BASE + CONFIG_SYS_MALLOC_LEN);
+	mem_malloc_start = CONFIG_SYS_MALLOC_BASE;
 	mem_malloc_brk = mem_malloc_start;
 	memset ((void *)mem_malloc_start, 0, mem_malloc_end - mem_malloc_start);
 }
@@ -94,10 +95,10 @@ typedef int (init_fnc_t) (void);
 init_fnc_t *init_sequence[] = {
 	env_init,
 	serial_init,
-#ifdef CFG_GPIO_0
+#ifdef CONFIG_SYS_GPIO_0
 	gpio_init,
 #endif
-#ifdef CFG_INTC_0
+#ifdef CONFIG_SYS_INTC_0
 	interrupts_init,
 #endif
 	NULL,
@@ -107,18 +108,19 @@ void board_init (void)
 {
 	bd_t *bd;
 	init_fnc_t **init_fnc_ptr;
-	gd = (gd_t *) CFG_GBL_DATA_OFFSET;
+	gd = (gd_t *) CONFIG_SYS_GBL_DATA_OFFSET;
 #if defined(CONFIG_CMD_FLASH)
 	ulong flash_size = 0;
 #endif
 	asm ("nop");	/* FIXME gd is not initialize - wait */
-	memset ((void *)gd, 0, CFG_GBL_DATA_SIZE);
+	memset ((void *)gd, 0, CONFIG_SYS_GBL_DATA_SIZE);
 	gd->bd = (bd_t *) (gd + 1);	/* At end of global data */
 	gd->baudrate = CONFIG_BAUDRATE;
 	bd = gd->bd;
 	bd->bi_baudrate = CONFIG_BAUDRATE;
-	bd->bi_memstart = CFG_SDRAM_BASE;
-	bd->bi_memsize = CFG_SDRAM_SIZE;
+	bd->bi_memstart = CONFIG_SYS_SDRAM_BASE;
+	bd->bi_memsize = CONFIG_SYS_SDRAM_SIZE;
+	gd->flags |= GD_FLG_RELOC;      /* tell others: relocation done */
 
 	/* Initialise malloc() area */
 	mem_malloc_init ();
@@ -131,10 +133,10 @@ void board_init (void)
 	}
 
 #if defined(CONFIG_CMD_FLASH)
-	bd->bi_flashstart = CFG_FLASH_BASE;
+	bd->bi_flashstart = CONFIG_SYS_FLASH_BASE;
 	if (0 < (flash_size = flash_init ())) {
 		bd->bi_flashsize = flash_size;
-		bd->bi_flashoffset = CFG_FLASH_BASE + flash_size;
+		bd->bi_flashoffset = CONFIG_SYS_FLASH_BASE + flash_size;
 	} else {
 		puts ("Flash init FAILED");
 		bd->bi_flashstart = 0;
diff --git a/lib_microblaze/bootm.c b/lib_microblaze/bootm.c
index 5986a31cc..e97aae688 100644
--- a/lib_microblaze/bootm.c
+++ b/lib_microblaze/bootm.c
@@ -38,6 +38,9 @@ int do_bootm_linux(int flag, int argc, char *argv[], bootm_headers_t *images)
 	void	(*theKernel) (char *);
 	char	*commandline = getenv ("bootargs");
 
+	if ((flag != 0) && (flag != BOOTM_STATE_OS_GO))
+		return 1;
+
 	theKernel = (void (*)(char *))images->ep;
 
 	show_boot_progress (15);
@@ -49,6 +52,6 @@ int do_bootm_linux(int flag, int argc, char *argv[], bootm_headers_t *images)
 
 	theKernel (commandline);
 	/* does not return */
-error:
+
 	return 1;
 }
diff --git a/lib_microblaze/time.c b/lib_microblaze/time.c
index b5d8f1937..cbb43414f 100644
--- a/lib_microblaze/time.c
+++ b/lib_microblaze/time.c
@@ -26,7 +26,7 @@
 
 #include <common.h>
 
-#ifdef CFG_TIMER_0
+#ifdef CONFIG_SYS_TIMER_0
 void udelay (unsigned long usec)
 {
 	int i;
diff --git a/lib_mips/Makefile b/lib_mips/Makefile
index 817643795..7967e5803 100644
--- a/lib_mips/Makefile
+++ b/lib_mips/Makefile
@@ -28,7 +28,11 @@ LIB	= $(obj)lib$(ARCH).a
 SOBJS-y	+=
 
 COBJS-y	+= board.o
+ifeq ($(CONFIG_QEMU_MIPS),y)
+COBJS-y	+= bootm_qemu_mips.o
+else
 COBJS-y	+= bootm.o
+endif
 COBJS-y	+= time.o
 
 SRCS	:= $(SOBJS-y:.o=.S) $(COBJS-y:.o=.c)
diff --git a/lib_mips/board.c b/lib_mips/board.c
index 09b8b3bb3..dfe683161 100644
--- a/lib_mips/board.c
+++ b/lib_mips/board.c
@@ -25,20 +25,22 @@
 #include <command.h>
 #include <malloc.h>
 #include <devices.h>
+#include <timestamp.h>
 #include <version.h>
 #include <net.h>
 #include <environment.h>
 #include <nand.h>
+#include <onenand_uboot.h>
 #include <spi.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
-#if ( ((CFG_ENV_ADDR+CFG_ENV_SIZE) < CFG_MONITOR_BASE) || \
-      (CFG_ENV_ADDR >= (CFG_MONITOR_BASE + CFG_MONITOR_LEN)) ) || \
-    defined(CFG_ENV_IS_IN_NVRAM)
-#define	TOTAL_MALLOC_LEN	(CFG_MALLOC_LEN + CFG_ENV_SIZE)
+#if ( ((CONFIG_ENV_ADDR+CONFIG_ENV_SIZE) < CONFIG_SYS_MONITOR_BASE) || \
+      (CONFIG_ENV_ADDR >= (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)) ) || \
+    defined(CONFIG_ENV_IS_IN_NVRAM)
+#define	TOTAL_MALLOC_LEN	(CONFIG_SYS_MALLOC_LEN + CONFIG_ENV_SIZE)
 #else
-#define	TOTAL_MALLOC_LEN	CFG_MALLOC_LEN
+#define	TOTAL_MALLOC_LEN	CONFIG_SYS_MALLOC_LEN
 #endif
 
 #undef DEBUG
@@ -53,7 +55,7 @@ extern ulong uboot_end;
 ulong monitor_flash_len;
 
 const char version_string[] =
-	U_BOOT_VERSION" (" __DATE__ " - " __TIME__ ")";
+	U_BOOT_VERSION" (" U_BOOT_DATE " - " U_BOOT_TIME ")";
 
 static char *failed = "*** failed ***\n";
 
@@ -70,12 +72,21 @@ static ulong mem_malloc_brk;
  */
 unsigned long mips_io_port_base = -1;
 
+int __board_early_init_f(void)
+{
+	/*
+	 * Nothing to do in this dummy implementation
+	 */
+	return 0;
+}
+int board_early_init_f(void) __attribute__((weak, alias("__board_early_init_f")));
+
 /*
  * The Malloc area is immediately below the monitor copy in DRAM
  */
 static void mem_malloc_init (void)
 {
-	ulong dest_addr = CFG_MONITOR_BASE + gd->reloc_off;
+	ulong dest_addr = CONFIG_SYS_MONITOR_BASE + gd->reloc_off;
 
 	mem_malloc_end = dest_addr;
 	mem_malloc_start = dest_addr - TOTAL_MALLOC_LEN;
@@ -123,7 +134,7 @@ static int display_banner(void)
 	return (0);
 }
 
-#ifndef CFG_NO_FLASH
+#ifndef CONFIG_SYS_NO_FLASH
 static void display_flash_config(ulong size)
 {
 	puts ("Flash: ");
@@ -167,6 +178,7 @@ static int init_baudrate (void)
 typedef int (init_fnc_t) (void);
 
 init_fnc_t *init_sequence[] = {
+	board_early_init_f,
 	timer_init,
 	env_init,		/* initialize environment */
 #ifdef CONFIG_INCA_IP
@@ -187,7 +199,7 @@ void board_init_f(ulong bootflag)
 	gd_t gd_data, *id;
 	bd_t *bd;
 	init_fnc_t **init_fnc_ptr;
-	ulong addr, addr_sp, len = (ulong)&uboot_end - CFG_MONITOR_BASE;
+	ulong addr, addr_sp, len = (ulong)&uboot_end - CONFIG_SYS_MONITOR_BASE;
 	ulong *s;
 #ifdef CONFIG_PURPLE
 	void copy_code (ulong);
@@ -211,7 +223,7 @@ void board_init_f(ulong bootflag)
 	 * Now that we have DRAM mapped and working, we can
 	 * relocate the code and continue running from DRAM.
 	 */
-	addr = CFG_SDRAM_BASE + gd->ram_size;
+	addr = CONFIG_SYS_SDRAM_BASE + gd->ram_size;
 
 	/* We can reserve some RAM "on top" here.
 	 */
@@ -252,10 +264,10 @@ void board_init_f(ulong bootflag)
 
 	/* Reserve memory for boot params.
 	 */
-	addr_sp -= CFG_BOOTPARAMS_LEN;
+	addr_sp -= CONFIG_SYS_BOOTPARAMS_LEN;
 	bd->bi_boot_params = addr_sp;
 	debug ("Reserving %dk for boot params() at: %08lx\n",
-			CFG_BOOTPARAMS_LEN >> 10, addr_sp);
+			CONFIG_SYS_BOOTPARAMS_LEN >> 10, addr_sp);
 
 	/*
 	 * Finally, we set up a new (bigger) stack.
@@ -274,7 +286,7 @@ void board_init_f(ulong bootflag)
 	/*
 	 * Save local variables to board info struct
 	 */
-	bd->bi_memstart	= CFG_SDRAM_BASE;	/* start of  DRAM memory */
+	bd->bi_memstart	= CONFIG_SYS_SDRAM_BASE;	/* start of  DRAM memory */
 	bd->bi_memsize	= gd->ram_size;		/* size  of  DRAM memory in bytes */
 	bd->bi_baudrate	= gd->baudrate;		/* Console Baudrate */
 
@@ -304,11 +316,11 @@ void board_init_f(ulong bootflag)
 void board_init_r (gd_t *id, ulong dest_addr)
 {
 	cmd_tbl_t *cmdtp;
-#ifndef CFG_NO_FLASH
+#ifndef CONFIG_SYS_NO_FLASH
 	ulong size;
 #endif
 	extern void malloc_bin_reloc (void);
-#ifndef CFG_ENV_IS_NOWHERE
+#ifndef CONFIG_ENV_IS_NOWHERE
 	extern char * env_name_spec;
 #endif
 	char *s, *e;
@@ -320,7 +332,7 @@ void board_init_r (gd_t *id, ulong dest_addr)
 
 	debug ("Now running in RAM - U-Boot at: %08lx\n", dest_addr);
 
-	gd->reloc_off = dest_addr - CFG_MONITOR_BASE;
+	gd->reloc_off = dest_addr - CONFIG_SYS_MONITOR_BASE;
 
 	monitor_flash_len = (ulong)&uboot_end_data - dest_addr;
 
@@ -345,7 +357,7 @@ void board_init_r (gd_t *id, ulong dest_addr)
 			addr = (ulong)(cmdtp->usage) + gd->reloc_off;
 			cmdtp->usage = (char *)addr;
 		}
-#ifdef	CFG_LONGHELP
+#ifdef	CONFIG_SYS_LONGHELP
 		if (cmdtp->help) {
 			addr = (ulong)(cmdtp->help) + gd->reloc_off;
 			cmdtp->help = (char *)addr;
@@ -353,21 +365,21 @@ void board_init_r (gd_t *id, ulong dest_addr)
 #endif
 	}
 	/* there are some other pointer constants we must deal with */
-#ifndef CFG_ENV_IS_NOWHERE
+#ifndef CONFIG_ENV_IS_NOWHERE
 	env_name_spec += gd->reloc_off;
 #endif
 
 	bd = gd->bd;
 
-#ifndef CFG_NO_FLASH
+#ifndef CONFIG_SYS_NO_FLASH
 	/* configure available FLASH banks */
 	size = flash_init();
 	display_flash_config (size);
 	bd->bi_flashsize = size;
 #endif
 
-	bd->bi_flashstart = CFG_FLASH_BASE;
-#if CFG_MONITOR_BASE == CFG_FLASH_BASE
+	bd->bi_flashstart = CONFIG_SYS_FLASH_BASE;
+#if CONFIG_SYS_MONITOR_BASE == CONFIG_SYS_FLASH_BASE
 	bd->bi_flashoffset = monitor_flash_len;	/* reserved area for U-Boot */
 #else
 	bd->bi_flashoffset = 0;
@@ -377,6 +389,15 @@ void board_init_r (gd_t *id, ulong dest_addr)
 	mem_malloc_init();
 	malloc_bin_reloc();
 
+#ifdef CONFIG_CMD_NAND
+	puts ("NAND:  ");
+	nand_init ();		/* go init the NAND */
+#endif
+
+#if defined(CONFIG_CMD_ONENAND)
+	onenand_init();
+#endif
+
 	/* relocate environment function pointers etc. */
 	env_relocate();
 
@@ -418,11 +439,6 @@ void board_init_r (gd_t *id, ulong dest_addr)
 	}
 #endif
 
-#ifdef CONFIG_CMD_NAND
-	puts ("NAND:  ");
-	nand_init ();		/* go init the NAND */
-#endif
-
 #ifdef CONFIG_CMD_SPI
 	puts ("SPI:   ");
 	spi_init ();		/* go init the SPI */
diff --git a/lib_mips/bootm.c b/lib_mips/bootm.c
index c1bf21e3f..3db22eafd 100644
--- a/lib_mips/bootm.c
+++ b/lib_mips/bootm.c
@@ -50,6 +50,9 @@ int do_bootm_linux(int flag, int argc, char *argv[], bootm_headers_t *images)
 	char	env_buf[12];
 	char	*cp;
 
+	if ((flag != 0) && (flag != BOOTM_STATE_OS_GO))
+		return 1;
+
 	/* find kernel entry point */
 	theKernel = (void (*)(int, char **, char **, int *))images->ep;
 
@@ -73,7 +76,7 @@ int do_bootm_linux(int flag, int argc, char *argv[], bootm_headers_t *images)
 	linux_env_set ("memsize", env_buf);
 
 	sprintf (env_buf, "0x%08X", (uint) UNCACHED_SDRAM (images->rd_start));
-	linux_env_set ("images->rd_start", env_buf);
+	linux_env_set ("initrd_start", env_buf);
 
 	sprintf (env_buf, "0x%X", (uint) (images->rd_end - images->rd_start));
 	linux_env_set ("initrd_size", env_buf);
diff --git a/lib_mips/bootm_qemu_mips.c b/lib_mips/bootm_qemu_mips.c
new file mode 100644
index 000000000..cc70fa93f
--- /dev/null
+++ b/lib_mips/bootm_qemu_mips.c
@@ -0,0 +1,76 @@
+/*
+ * (C) Copyright 2008
+ * Jean-Christophe PLAGNIOL-VILLARD <jcplagniol@jcrosoft.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+
+#include <common.h>
+#include <command.h>
+#include <image.h>
+#include <asm/byteorder.h>
+#include <asm/addrspace.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+int do_bootm_linux(int flag, int argc, char *argv[], bootm_headers_t *images)
+{
+	void	(*theKernel) (int, char **, char **, int *);
+	char	*bootargs = getenv ("bootargs");
+	char	*start;
+	uint	len;
+
+	/* find kernel entry point */
+	theKernel = (void (*)(int, char **, char **, int *))images->ep;
+
+	show_boot_progress (15);
+
+	debug ("## Transferring control to Linux (at address %08lx) ...\n",
+		(ulong) theKernel);
+
+	gd->bd->bi_boot_params = gd->bd->bi_memstart + (16 << 20) - 256;
+	debug ("%-12s= 0x%08lX\n", "boot_params", (ulong)gd->bd->bi_boot_params);
+
+	/* set Magic */
+	*(int32_t *)(gd->bd->bi_boot_params - 4) = 0x12345678;
+	/* set ram_size */
+	*(int32_t *)(gd->bd->bi_boot_params - 8) = gd->ram_size;
+
+	start = (char*)gd->bd->bi_boot_params;
+
+	len = strlen(bootargs);
+
+	strncpy(start, bootargs, len + 1);
+
+	start += len;
+
+	len = images->rd_end - images->rd_start;
+	if (len > 0) {
+		start += sprintf(start," rd_start=0x%08X rd_size=0x%0X",
+		(uint) UNCACHED_SDRAM (images->rd_start),
+		(uint) len);
+	}
+
+	/* we assume that the kernel is in place */
+	printf ("\nStarting kernel ...\n\n");
+
+	theKernel (0, NULL, NULL, 0);
+	/* does not return */
+	return 1;
+}
diff --git a/lib_mips/time.c b/lib_mips/time.c
index 1e9278996..07e356d23 100644
--- a/lib_mips/time.c
+++ b/lib_mips/time.c
@@ -27,7 +27,7 @@
 static unsigned long timestamp;
 
 /* how many counter cycles in a jiffy */
-#define CYCLES_PER_JIFFY	(CFG_MIPS_TIMER_FREQ + CFG_HZ / 2) / CFG_HZ
+#define CYCLES_PER_JIFFY	(CONFIG_SYS_MIPS_TIMER_FREQ + CONFIG_SYS_HZ / 2) / CONFIG_SYS_HZ
 
 /*
  * timer without interrupts
@@ -74,7 +74,7 @@ void udelay(unsigned long usec)
 {
 	unsigned int tmo;
 
-	tmo = read_c0_count() + (usec * (CFG_MIPS_TIMER_FREQ / 1000000));
+	tmo = read_c0_count() + (usec * (CONFIG_SYS_MIPS_TIMER_FREQ / 1000000));
 	while ((tmo - read_c0_count()) < 0x7fffffff)
 		/*NOP*/;
 }
@@ -94,5 +94,5 @@ unsigned long long get_ticks(void)
  */
 ulong get_tbclk(void)
 {
-	return CFG_HZ;
+	return CONFIG_SYS_HZ;
 }
diff --git a/lib_nios/board.c b/lib_nios/board.c
index cdaf753ac..024beb515 100644
--- a/lib_nios/board.c
+++ b/lib_nios/board.c
@@ -63,8 +63,8 @@ static	ulong	mem_malloc_brk	 = 0;
  */
 static void mem_malloc_init (void)
 {
-	mem_malloc_start = CFG_MALLOC_BASE;
-	mem_malloc_end = mem_malloc_start + CFG_MALLOC_LEN;
+	mem_malloc_start = CONFIG_SYS_MALLOC_BASE;
+	mem_malloc_end = mem_malloc_start + CONFIG_SYS_MALLOC_LEN;
 	mem_malloc_brk = mem_malloc_start;
 	memset ((void *) mem_malloc_start,
 		0,
@@ -113,25 +113,25 @@ void board_init (void)
 	int i;
 
 	/* Pointer is writable since we allocated a register for it.
-	 * Nios treats CFG_GBL_DATA_OFFSET as an address.
+	 * Nios treats CONFIG_SYS_GBL_DATA_OFFSET as an address.
 	 */
-	gd = (gd_t *)CFG_GBL_DATA_OFFSET;
+	gd = (gd_t *)CONFIG_SYS_GBL_DATA_OFFSET;
 	/* compiler optimization barrier needed for GCC >= 3.4 */
 	__asm__ __volatile__("": : :"memory");
 
-	memset( gd, 0, CFG_GBL_DATA_SIZE );
+	memset( gd, 0, CONFIG_SYS_GBL_DATA_SIZE );
 
 	gd->bd = (bd_t *)(gd+1);	/* At end of global data */
 	gd->baudrate = CONFIG_BAUDRATE;
 	gd->cpu_clk = CONFIG_SYS_CLK_FREQ;
 
 	bd = gd->bd;
-	bd->bi_memstart	= CFG_SDRAM_BASE;
-	bd->bi_memsize = CFG_SDRAM_SIZE;
-	bd->bi_flashstart = CFG_FLASH_BASE;
-#if	defined(CFG_SRAM_BASE) && defined(CFG_SRAM_SIZE)
-	bd->bi_sramstart= CFG_SRAM_BASE;
-	bd->bi_sramsize	= CFG_SRAM_SIZE;
+	bd->bi_memstart	= CONFIG_SYS_SDRAM_BASE;
+	bd->bi_memsize = CONFIG_SYS_SDRAM_SIZE;
+	bd->bi_flashstart = CONFIG_SYS_FLASH_BASE;
+#if	defined(CONFIG_SYS_SRAM_BASE) && defined(CONFIG_SYS_SRAM_SIZE)
+	bd->bi_sramstart= CONFIG_SYS_SRAM_BASE;
+	bd->bi_sramsize	= CONFIG_SYS_SRAM_SIZE;
 #endif
 	bd->bi_baudrate	= CONFIG_BAUDRATE;
 
diff --git a/lib_nios/mult.c b/lib_nios/mult.c
index 66bb64d0c..ec8139ed5 100644
--- a/lib_nios/mult.c
+++ b/lib_nios/mult.c
@@ -20,7 +20,7 @@
 
 #include <common.h>
 
-#if !defined(CFG_NIOS_MULT_HW) && !defined(CFG_NIOS_MULT_MSTEP)
+#if !defined(CONFIG_SYS_NIOS_MULT_HW) && !defined(CONFIG_SYS_NIOS_MULT_MSTEP)
 
 #include "math.h"
 
@@ -53,4 +53,4 @@ UHItype __mulhi3 (UHItype a, UHItype b)
 	return c;
 }
 
-#endif /*!defined(CFG_NIOS_MULT_HW) && !defined(CFG_NIOS_MULT_MSTEP) */
+#endif /*!defined(CONFIG_SYS_NIOS_MULT_HW) && !defined(CONFIG_SYS_NIOS_MULT_MSTEP) */
diff --git a/lib_nios2/board.c b/lib_nios2/board.c
index 7ffb3f019..d759f0fd8 100644
--- a/lib_nios2/board.c
+++ b/lib_nios2/board.c
@@ -31,7 +31,7 @@
 #ifdef CONFIG_STATUS_LED
 #include <status_led.h>
 #endif
-#if defined(CFG_NIOS_EPCSBASE)
+#if defined(CONFIG_SYS_NIOS_EPCSBASE)
 #include <nios2-epcs.h>
 #endif
 
@@ -66,8 +66,8 @@ static	ulong	mem_malloc_brk	 = 0;
  */
 static void mem_malloc_init (void)
 {
-	mem_malloc_start = CFG_MALLOC_BASE;
-	mem_malloc_end = mem_malloc_start + CFG_MALLOC_LEN;
+	mem_malloc_start = CONFIG_SYS_MALLOC_BASE;
+	mem_malloc_end = mem_malloc_start + CONFIG_SYS_MALLOC_LEN;
 	mem_malloc_brk = mem_malloc_start;
 	memset ((void *) mem_malloc_start,
 		0,
@@ -96,7 +96,7 @@ init_fnc_t *init_sequence[] = {
 #if defined(CONFIG_BOARD_EARLY_INIT_F)
 	board_early_init_f,	/* Call board-specific init code early.*/
 #endif
-#if defined(CFG_NIOS_EPCSBASE)
+#if defined(CONFIG_SYS_NIOS_EPCSBASE)
 	epcs_reset,
 #endif
 
@@ -119,25 +119,25 @@ void board_init (void)
 	int i;
 
 	/* Pointer is writable since we allocated a register for it.
-	 * Nios treats CFG_GBL_DATA_OFFSET as an address.
+	 * Nios treats CONFIG_SYS_GBL_DATA_OFFSET as an address.
 	 */
-	gd = (gd_t *)CFG_GBL_DATA_OFFSET;
+	gd = (gd_t *)CONFIG_SYS_GBL_DATA_OFFSET;
 	/* compiler optimization barrier needed for GCC >= 3.4 */
 	__asm__ __volatile__("": : :"memory");
 
-	memset( gd, 0, CFG_GBL_DATA_SIZE );
+	memset( gd, 0, CONFIG_SYS_GBL_DATA_SIZE );
 
 	gd->bd = (bd_t *)(gd+1);	/* At end of global data */
 	gd->baudrate = CONFIG_BAUDRATE;
 	gd->cpu_clk = CONFIG_SYS_CLK_FREQ;
 
 	bd = gd->bd;
-	bd->bi_memstart	= CFG_SDRAM_BASE;
-	bd->bi_memsize = CFG_SDRAM_SIZE;
-	bd->bi_flashstart = CFG_FLASH_BASE;
-#if	defined(CFG_SRAM_BASE) && defined(CFG_SRAM_SIZE)
-	bd->bi_sramstart= CFG_SRAM_BASE;
-	bd->bi_sramsize	= CFG_SRAM_SIZE;
+	bd->bi_memstart	= CONFIG_SYS_SDRAM_BASE;
+	bd->bi_memsize = CONFIG_SYS_SDRAM_SIZE;
+	bd->bi_flashstart = CONFIG_SYS_FLASH_BASE;
+#if	defined(CONFIG_SYS_SRAM_BASE) && defined(CONFIG_SYS_SRAM_SIZE)
+	bd->bi_sramstart= CONFIG_SYS_SRAM_BASE;
+	bd->bi_sramsize	= CONFIG_SYS_SRAM_SIZE;
 #endif
 	bd->bi_baudrate	= CONFIG_BAUDRATE;
 
diff --git a/lib_nios2/bootm.c b/lib_nios2/bootm.c
index c0be4fdbf..53fd5691a 100644
--- a/lib_nios2/bootm.c
+++ b/lib_nios2/bootm.c
@@ -29,12 +29,14 @@ int do_bootm_linux(int flag, int argc, char *argv[], bootm_headers_t *images)
 {
 	void (*kernel)(void) = (void (*)(void))images->ep;
 
+	if ((flag != 0) && (flag != BOOTM_STATE_OS_GO))
+		return 1;
+
 	/* For now we assume the Microtronix linux ... which only
 	 * needs to be called ;-)
 	 */
 	kernel ();
 	/* does not return */
 
-error:
 	return 1;
 }
diff --git a/lib_nios2/cache.S b/lib_nios2/cache.S
index eb7735af7..ee3b4b79b 100644
--- a/lib_nios2/cache.S
+++ b/lib_nios2/cache.S
@@ -29,8 +29,8 @@
 
 flush_dcache:
 	add	r5, r5, r4
-	movhi	r8, %hi(CFG_DCACHELINE_SIZE)
-	ori	r8, r8, %lo(CFG_DCACHELINE_SIZE)
+	movhi	r8, %hi(CONFIG_SYS_DCACHELINE_SIZE)
+	ori	r8, r8, %lo(CONFIG_SYS_DCACHELINE_SIZE)
 0:	flushd	0(r4)
 	add	r4, r4, r8
 	bltu	r4, r5, 0b
@@ -41,8 +41,8 @@ flush_dcache:
 
 flush_icache:
 	add	r5, r5, r4
-	movhi	r8, %hi(CFG_ICACHELINE_SIZE)
-	ori	r8, r8, %lo(CFG_ICACHELINE_SIZE)
+	movhi	r8, %hi(CONFIG_SYS_ICACHELINE_SIZE)
+	ori	r8, r8, %lo(CONFIG_SYS_ICACHELINE_SIZE)
 1:	flushi	r4
 	add	r4, r4, r8
 	bltu	r4, r5, 1b
@@ -55,16 +55,16 @@ flush_cache:
 	mov	r9, r4
 	mov	r10, r5
 
-	movhi	r8, %hi(CFG_DCACHELINE_SIZE)
-	ori	r8, r8, %lo(CFG_DCACHELINE_SIZE)
+	movhi	r8, %hi(CONFIG_SYS_DCACHELINE_SIZE)
+	ori	r8, r8, %lo(CONFIG_SYS_DCACHELINE_SIZE)
 0:	flushd	0(r4)
 	add	r4, r4, r8
 	bltu	r4, r5, 0b
 
 	mov	r4, r9
 	mov	r5, r10
-	movhi	r8, %hi(CFG_ICACHELINE_SIZE)
-	ori	r8, r8, %lo(CFG_ICACHELINE_SIZE)
+	movhi	r8, %hi(CONFIG_SYS_ICACHELINE_SIZE)
+	ori	r8, r8, %lo(CONFIG_SYS_ICACHELINE_SIZE)
 1:	flushi	r4
 	add	r4, r4, r8
 	bltu	r4, r5, 1b
diff --git a/lib_nios2/mult.c b/lib_nios2/mult.c
index 66bb64d0c..ec8139ed5 100644
--- a/lib_nios2/mult.c
+++ b/lib_nios2/mult.c
@@ -20,7 +20,7 @@
 
 #include <common.h>
 
-#if !defined(CFG_NIOS_MULT_HW) && !defined(CFG_NIOS_MULT_MSTEP)
+#if !defined(CONFIG_SYS_NIOS_MULT_HW) && !defined(CONFIG_SYS_NIOS_MULT_MSTEP)
 
 #include "math.h"
 
@@ -53,4 +53,4 @@ UHItype __mulhi3 (UHItype a, UHItype b)
 	return c;
 }
 
-#endif /*!defined(CFG_NIOS_MULT_HW) && !defined(CFG_NIOS_MULT_MSTEP) */
+#endif /*!defined(CONFIG_SYS_NIOS_MULT_HW) && !defined(CONFIG_SYS_NIOS_MULT_MSTEP) */
diff --git a/lib_ppc/board.c b/lib_ppc/board.c
index c8f075f5a..289a32a64 100644
--- a/lib_ppc/board.c
+++ b/lib_ppc/board.c
@@ -52,7 +52,7 @@
 #endif
 #include <net.h>
 #include <serial.h>
-#ifdef CFG_ALLOC_DPRAM
+#ifdef CONFIG_SYS_ALLOC_DPRAM
 #if !defined(CONFIG_CPM2)
 #include <commproc.h>
 #endif
@@ -68,14 +68,14 @@
 #if defined(CONFIG_LOGBUFFER)
 #include <logbuff.h>
 #endif
-#if defined(CFG_INIT_RAM_LOCK) && defined(CONFIG_E500)
+#if defined(CONFIG_SYS_INIT_RAM_LOCK) && defined(CONFIG_E500)
 #include <asm/cache.h>
 #endif
 #ifdef CONFIG_PS2KBD
 #include <keyboard.h>
 #endif
 
-#ifdef CFG_UPDATE_FLASH_SIZE
+#ifdef CONFIG_SYS_UPDATE_FLASH_SIZE
 extern int update_flash_size (int flash_size);
 #endif
 
@@ -106,18 +106,18 @@ extern int board_start_ide(void);
 
 DECLARE_GLOBAL_DATA_PTR;
 
-#if defined(CFG_ENV_IS_EMBEDDED)
-#define TOTAL_MALLOC_LEN	CFG_MALLOC_LEN
-#elif ( ((CFG_ENV_ADDR+CFG_ENV_SIZE) < CFG_MONITOR_BASE) || \
-	(CFG_ENV_ADDR >= (CFG_MONITOR_BASE + CFG_MONITOR_LEN)) ) || \
-      defined(CFG_ENV_IS_IN_NVRAM)
-#define	TOTAL_MALLOC_LEN	(CFG_MALLOC_LEN + CFG_ENV_SIZE)
+#if defined(CONFIG_ENV_IS_EMBEDDED)
+#define TOTAL_MALLOC_LEN	CONFIG_SYS_MALLOC_LEN
+#elif ( ((CONFIG_ENV_ADDR+CONFIG_ENV_SIZE) < CONFIG_SYS_MONITOR_BASE) || \
+	(CONFIG_ENV_ADDR >= (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)) ) || \
+      defined(CONFIG_ENV_IS_IN_NVRAM)
+#define	TOTAL_MALLOC_LEN	(CONFIG_SYS_MALLOC_LEN + CONFIG_ENV_SIZE)
 #else
-#define	TOTAL_MALLOC_LEN	CFG_MALLOC_LEN
+#define	TOTAL_MALLOC_LEN	CONFIG_SYS_MALLOC_LEN
 #endif
 
-#if !defined(CFG_MEM_TOP_HIDE)
-#define CFG_MEM_TOP_HIDE	0
+#if !defined(CONFIG_SYS_MEM_TOP_HIDE)
+#define CONFIG_SYS_MEM_TOP_HIDE	0
 #endif
 
 extern ulong __init_end;
@@ -146,7 +146,7 @@ static	ulong	mem_malloc_brk	 = 0;
 static void mem_malloc_init (void)
 {
 #if !defined(CONFIG_RELOC_FIXUP_WORKS)
-	mem_malloc_end = CFG_MONITOR_BASE + gd->reloc_off;
+	mem_malloc_end = CONFIG_SYS_MONITOR_BASE + gd->reloc_off;
 #endif
 	mem_malloc_start = mem_malloc_end - TOTAL_MALLOC_LEN;
 	mem_malloc_brk = mem_malloc_start;
@@ -234,7 +234,7 @@ static int init_func_ram (void)
 static int init_func_i2c (void)
 {
 	puts ("I2C:   ");
-	i2c_init (CFG_I2C_SPEED, CFG_I2C_SLAVE);
+	i2c_init (CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
 	puts ("ready\n");
 	return (0);
 }
@@ -291,7 +291,7 @@ init_fnc_t *init_sequence[] = {
 #endif
 	init_timebase,
 #endif
-#ifdef CFG_ALLOC_DPRAM
+#ifdef CONFIG_SYS_ALLOC_DPRAM
 #if !defined(CONFIG_CPM2)
 	dpram_init,
 #endif
@@ -343,9 +343,9 @@ init_fnc_t *init_sequence[] = {
 #endif
 	INIT_FUNC_WATCHDOG_RESET
 	init_func_ram,
-#if defined(CFG_DRAM_TEST)
+#if defined(CONFIG_SYS_DRAM_TEST)
 	testdram,
-#endif /* CFG_DRAM_TEST */
+#endif /* CONFIG_SYS_DRAM_TEST */
 	INIT_FUNC_WATCHDOG_RESET
 
 	NULL,			/* Terminate this list */
@@ -384,7 +384,7 @@ ulong get_effective_memsize(void)
 #ifdef CONFIG_LOGBUFFER
 unsigned long logbuffer_base(void)
 {
-	return CFG_SDRAM_BASE + get_effective_memsize() - LOGBUFF_LEN;
+	return CONFIG_SYS_SDRAM_BASE + get_effective_memsize() - LOGBUFF_LEN;
 }
 #endif
 
@@ -402,7 +402,7 @@ void board_init_f (ulong bootflag)
 #endif
 
 	/* Pointer is writable since we allocated a register for it */
-	gd = (gd_t *) (CFG_INIT_RAM_ADDR + CFG_GBL_DATA_OFFSET);
+	gd = (gd_t *) (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET);
 	/* compiler optimization barrier needed for GCC >= 3.4 */
 	__asm__ __volatile__("": : :"memory");
 
@@ -430,7 +430,7 @@ void board_init_f (ulong bootflag)
 	 *  - monitor code
 	 *  - board info struct
 	 */
-	len = (ulong)&_end - CFG_MONITOR_BASE;
+	len = (ulong)&_end - CONFIG_SYS_MONITOR_BASE;
 
 	/*
 	 * Subtract specified amount of memory to hide so that it won't
@@ -442,9 +442,9 @@ void board_init_f (ulong bootflag)
 	 * memory size from the SDRAM controller setup will have to
 	 * get fixed.
 	 */
-	gd->ram_size -= CFG_MEM_TOP_HIDE;
+	gd->ram_size -= CONFIG_SYS_MEM_TOP_HIDE;
 
-	addr = CFG_SDRAM_BASE + get_effective_memsize();
+	addr = CONFIG_SYS_SDRAM_BASE + get_effective_memsize();
 
 #ifdef CONFIG_LOGBUFFER
 #ifndef CONFIG_ALT_LB_ADDR
@@ -536,15 +536,15 @@ void board_init_f (ulong bootflag)
 	 * Save local variables to board info struct
 	 */
 
-	bd->bi_memstart  = CFG_SDRAM_BASE;	/* start of  DRAM memory	*/
+	bd->bi_memstart  = CONFIG_SYS_SDRAM_BASE;	/* start of  DRAM memory	*/
 	bd->bi_memsize   = gd->ram_size;	/* size  of  DRAM memory in bytes */
 
 #ifdef CONFIG_IP860
 	bd->bi_sramstart = SRAM_BASE;	/* start of  SRAM memory	*/
 	bd->bi_sramsize  = SRAM_SIZE;	/* size  of  SRAM memory	*/
 #elif defined CONFIG_MPC8220
-	bd->bi_sramstart = CFG_SRAM_BASE;	/* start of  SRAM memory	*/
-	bd->bi_sramsize  = CFG_SRAM_SIZE;	/* size  of  SRAM memory	*/
+	bd->bi_sramstart = CONFIG_SYS_SRAM_BASE;	/* start of  SRAM memory	*/
+	bd->bi_sramsize  = CONFIG_SYS_SRAM_SIZE;	/* size  of  SRAM memory	*/
 #else
 	bd->bi_sramstart = 0;		/* FIXME */ /* start of  SRAM memory	*/
 	bd->bi_sramsize  = 0;		/* FIXME */ /* size  of  SRAM memory	*/
@@ -552,16 +552,16 @@ void board_init_f (ulong bootflag)
 
 #if defined(CONFIG_8xx) || defined(CONFIG_8260) || defined(CONFIG_5xx) || \
     defined(CONFIG_E500) || defined(CONFIG_MPC86xx)
-	bd->bi_immr_base = CFG_IMMR;	/* base  of IMMR register     */
+	bd->bi_immr_base = CONFIG_SYS_IMMR;	/* base  of IMMR register     */
 #endif
 #if defined(CONFIG_MPC5xxx)
-	bd->bi_mbar_base = CFG_MBAR;	/* base of internal registers */
+	bd->bi_mbar_base = CONFIG_SYS_MBAR;	/* base of internal registers */
 #endif
 #if defined(CONFIG_MPC83XX)
-	bd->bi_immrbar = CFG_IMMR;
+	bd->bi_immrbar = CONFIG_SYS_IMMR;
 #endif
 #if defined(CONFIG_MPC8220)
-	bd->bi_mbar_base = CFG_MBAR;	/* base of internal registers */
+	bd->bi_mbar_base = CONFIG_SYS_MBAR;	/* base of internal registers */
 	bd->bi_inpfreq   = gd->inp_clk;
 	bd->bi_pcifreq   = gd->pci_clk;
 	bd->bi_vcofreq   = gd->vco_clk;
@@ -570,7 +570,7 @@ void board_init_f (ulong bootflag)
 
 	/* store bootparam to sram (backward compatible), here? */
 	{
-		u32 *sram = (u32 *)CFG_SRAM_BASE;
+		u32 *sram = (u32 *)CONFIG_SYS_SRAM_BASE;
 		*sram++ = gd->ram_size;
 		*sram++ = gd->bus_clk;
 		*sram++ = gd->inp_clk;
@@ -601,7 +601,7 @@ void board_init_f (ulong bootflag)
 #endif /* CONFIG_MPC5xxx */
 	bd->bi_baudrate = gd->baudrate;	/* Console Baudrate     */
 
-#ifdef CFG_EXTBDINFO
+#ifdef CONFIG_SYS_EXTBDINFO
 	strncpy ((char *)bd->bi_s_version, "1.2", sizeof (bd->bi_s_version));
 	strncpy ((char *)bd->bi_r_version, U_BOOT_VERSION, sizeof (bd->bi_r_version));
 
@@ -635,6 +635,16 @@ void board_init_f (ulong bootflag)
 	/* NOTREACHED - relocate_code() does not return */
 }
 
+int __is_sata_supported(void)
+{
+	/* For some boards, when sata disabled by the switch, and the
+	 * driver still access the sata registers, the cpu will hangup.
+	 * please define platform specific is_sata_supported() if your
+	 * board have such issue.*/
+	return 1;
+}
+int is_sata_supported(void) __attribute__((weak, alias("__is_sata_supported")));
+
 /************************************************************************
  *
  * This is the next part if the initialization sequence: we are now
@@ -651,11 +661,11 @@ void board_init_r (gd_t *id, ulong dest_addr)
 	bd_t *bd;
 	int i;
 	extern void malloc_bin_reloc (void);
-#ifndef CFG_ENV_IS_NOWHERE
+#ifndef CONFIG_ENV_IS_NOWHERE
 	extern char * env_name_spec;
 #endif
 
-#ifndef CFG_NO_FLASH
+#ifndef CONFIG_SYS_NO_FLASH
 	ulong flash_size;
 #endif
 
@@ -668,7 +678,7 @@ void board_init_r (gd_t *id, ulong dest_addr)
 	gd->reloc_off = 0;
 	mem_malloc_end = dest_addr;
 #else
-	gd->reloc_off = dest_addr - CFG_MONITOR_BASE;
+	gd->reloc_off = dest_addr - CONFIG_SYS_MONITOR_BASE;
 #endif
 
 #ifdef CONFIG_SERIAL_MULTI
@@ -679,6 +689,11 @@ void board_init_r (gd_t *id, ulong dest_addr)
 
 	WATCHDOG_RESET ();
 
+	/*
+	 * Setup trap handlers
+	 */
+	trap_init (dest_addr);
+
 #if defined(CONFIG_BOARD_EARLY_INIT_R)
 	board_early_init_r ();
 #endif
@@ -705,7 +720,7 @@ void board_init_r (gd_t *id, ulong dest_addr)
 			addr = (ulong)(cmdtp->usage) + gd->reloc_off;
 			cmdtp->usage = (char *)addr;
 		}
-#ifdef	CFG_LONGHELP
+#ifdef	CONFIG_SYS_LONGHELP
 		if (cmdtp->help) {
 			addr = (ulong)(cmdtp->help) + gd->reloc_off;
 			cmdtp->help = (char *)addr;
@@ -713,7 +728,7 @@ void board_init_r (gd_t *id, ulong dest_addr)
 #endif
 	}
 	/* there are some other pointer constants we must deal with */
-#ifndef CFG_ENV_IS_NOWHERE
+#ifndef CONFIG_ENV_IS_NOWHERE
 	env_name_spec += gd->reloc_off;
 #endif
 
@@ -734,7 +749,7 @@ void board_init_r (gd_t *id, ulong dest_addr)
 	icache_enable ();	/* it's time to enable the instruction cache */
 #endif
 
-#if defined(CFG_INIT_RAM_LOCK) && defined(CONFIG_E500)
+#if defined(CONFIG_SYS_INIT_RAM_LOCK) && defined(CONFIG_E500)
 	unlock_ram_in_cache();	/* it's time to unlock D-cache in e500 */
 #endif
 
@@ -755,16 +770,11 @@ void board_init_r (gd_t *id, ulong dest_addr)
 
 	asm ("sync ; isync");
 
-	/*
-	 * Setup trap handlers
-	 */
-	trap_init (dest_addr);
-
-#if !defined(CFG_NO_FLASH)
+#if !defined(CONFIG_SYS_NO_FLASH)
 	puts ("FLASH: ");
 
 	if ((flash_size = flash_init ()) > 0) {
-# ifdef CFG_FLASH_CHECKSUM
+# ifdef CONFIG_SYS_FLASH_CHECKSUM
 		print_size (flash_size, "");
 		/*
 		 * Compute and print flash CRC if flashchecksum is set to 'y'
@@ -774,22 +784,22 @@ void board_init_r (gd_t *id, ulong dest_addr)
 		s = getenv ("flashchecksum");
 		if (s && (*s == 'y')) {
 			printf ("  CRC: %08X",
-				crc32 (0, (const unsigned char *) CFG_FLASH_BASE, flash_size)
+				crc32 (0, (const unsigned char *) CONFIG_SYS_FLASH_BASE, flash_size)
 			);
 		}
 		putc ('\n');
-# else	/* !CFG_FLASH_CHECKSUM */
+# else	/* !CONFIG_SYS_FLASH_CHECKSUM */
 		print_size (flash_size, "\n");
-# endif /* CFG_FLASH_CHECKSUM */
+# endif /* CONFIG_SYS_FLASH_CHECKSUM */
 	} else {
 		puts (failed);
 		hang ();
 	}
 
-	bd->bi_flashstart = CFG_FLASH_BASE;	/* update start of FLASH memory    */
+	bd->bi_flashstart = CONFIG_SYS_FLASH_BASE;	/* update start of FLASH memory    */
 	bd->bi_flashsize = flash_size;	/* size of FLASH memory (final value) */
 
-#if defined(CFG_UPDATE_FLASH_SIZE)
+#if defined(CONFIG_SYS_UPDATE_FLASH_SIZE)
 	/* Make a update of the Memctrl. */
 	update_flash_size (flash_size);
 #endif
@@ -798,17 +808,17 @@ void board_init_r (gd_t *id, ulong dest_addr)
 # if defined(CONFIG_PCU_E) || defined(CONFIG_OXC) || defined(CONFIG_RMU)
 	/* flash mapped at end of memory map */
 	bd->bi_flashoffset = TEXT_BASE + flash_size;
-# elif CFG_MONITOR_BASE == CFG_FLASH_BASE
+# elif CONFIG_SYS_MONITOR_BASE == CONFIG_SYS_FLASH_BASE
 	bd->bi_flashoffset = monitor_flash_len;	/* reserved area for startup monitor  */
 # else
 	bd->bi_flashoffset = 0;
 # endif
-#else	/* CFG_NO_FLASH */
+#else	/* CONFIG_SYS_NO_FLASH */
 
 	bd->bi_flashsize = 0;
 	bd->bi_flashstart = 0;
 	bd->bi_flashoffset = 0;
-#endif /* !CFG_NO_FLASH */
+#endif /* !CONFIG_SYS_NO_FLASH */
 
 	WATCHDOG_RESET ();
 
@@ -822,7 +832,7 @@ void board_init_r (gd_t *id, ulong dest_addr)
 	malloc_bin_reloc ();
 
 #ifdef CONFIG_SPI
-# if !defined(CFG_ENV_IS_IN_EEPROM)
+# if !defined(CONFIG_ENV_IS_IN_EEPROM)
 	spi_init_f ();
 # endif
 	spi_init_r ();
@@ -845,7 +855,7 @@ void board_init_r (gd_t *id, ulong dest_addr)
 	 * the environment is in EEPROM.
 	 */
 
-#if defined(CFG_EXTBDINFO)
+#if defined(CONFIG_SYS_EXTBDINFO)
 #if defined(CONFIG_405GP) || defined(CONFIG_405EP)
 #if defined(CONFIG_I2CFAST)
 	/*
@@ -867,13 +877,13 @@ void board_init_r (gd_t *id, ulong dest_addr)
 	bd->bi_iic_fast[1] = 0;
 #endif	/* CONFIG_I2CFAST */
 #endif	/* CONFIG_405GP, CONFIG_405EP */
-#endif	/* CFG_EXTBDINFO */
+#endif	/* CONFIG_SYS_EXTBDINFO */
 
 #if defined(CONFIG_SC3)
 	sc3_read_eeprom();
 #endif
 
-#if defined (CFG_ID_EEPROM) || defined (CFG_I2C_MAC_OFFSET)
+#if defined (CONFIG_ID_EEPROM) || defined (CONFIG_SYS_I2C_MAC_OFFSET)
 	mac_read_from_eeprom();
 #endif
 
@@ -944,6 +954,36 @@ void board_init_r (gd_t *id, ulong dest_addr)
 	}
 #endif
 
+#ifdef CONFIG_HAS_ETH4
+	/* handle 5th ethernet address */
+	s = getenv("eth4addr");
+#if defined(CONFIG_XPEDITE1K) || defined(CONFIG_METROBOX) || defined(CONFIG_KAREF)
+	if (s == NULL)
+		board_get_enetaddr(bd->bi_enet4addr);
+	else
+#endif
+	for (i = 0; i < 6; ++i) {
+		bd->bi_enet4addr[i] = s ? simple_strtoul (s, &e, 16) : 0;
+		if (s)
+			s = (*e) ? e + 1 : e;
+	}
+#endif
+
+#ifdef CONFIG_HAS_ETH5
+	/* handle 6th ethernet address */
+	s = getenv("eth5addr");
+#if defined(CONFIG_XPEDITE1K) || defined(CONFIG_METROBOX) || defined(CONFIG_KAREF)
+	if (s == NULL)
+		board_get_enetaddr(bd->bi_enet5addr);
+	else
+#endif
+	for (i = 0; i < 6; ++i) {
+		bd->bi_enet5addr[i] = s ? simple_strtoul (s, &e, 16) : 0;
+		if (s)
+			s = (*e) ? e + 1 : e;
+	}
+#endif
+
 #if defined(CONFIG_TQM8xxL) || defined(CONFIG_TQM8260) || \
     defined(CONFIG_TQM8272) || \
     defined(CONFIG_CCM) || defined(CONFIG_KUP4K) || \
@@ -1105,8 +1145,10 @@ void board_init_r (gd_t *id, ulong dest_addr)
 #endif
 
 #if defined(CONFIG_CMD_SATA)
-	puts ("SATA:  ");
-	sata_initialize ();
+	if (is_sata_supported()) {
+		puts("SATA:  ");
+		sata_initialize();
+	}
 #endif
 
 #ifdef CONFIG_LAST_STAGE_INIT
@@ -1245,7 +1287,7 @@ int mdm_init (void)
 			serial_puts(init_str);
 			serial_puts("\n");
 			for(;;) {
-				mdm_readline(console_buffer, CFG_CBSIZE);
+				mdm_readline(console_buffer, CONFIG_SYS_CBSIZE);
 				dbg("ini%d: [%s]", i, console_buffer);
 
 				if ((strcmp(console_buffer, "OK") == 0) ||
@@ -1269,7 +1311,7 @@ int mdm_init (void)
 	/* final stage - wait for connect */
 	for(;i > 1;) { /* if 'i' > 1 - wait for connection
 				  message from modem */
-		mdm_readline(console_buffer, CFG_CBSIZE);
+		mdm_readline(console_buffer, CONFIG_SYS_CBSIZE);
 		dbg("ini_f: [%s]", console_buffer);
 		if (strncmp(console_buffer, "CONNECT", 7) == 0) {
 			dbg("ini_f: connected");
@@ -1290,7 +1332,7 @@ int mdm_init (void)
  */
 #undef	XTRN_DECLARE_GLOBAL_DATA_PTR
 #define XTRN_DECLARE_GLOBAL_DATA_PTR	/* empty = allocate here */
-DECLARE_GLOBAL_DATA_PTR = (gd_t *) (CFG_INIT_RAM_ADDR + CFG_GBL_DATA_OFFSET);
+DECLARE_GLOBAL_DATA_PTR = (gd_t *) (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET);
 #endif  /* 0 */
 
 /************************************************************************/
diff --git a/lib_ppc/bootm.c b/lib_ppc/bootm.c
index 348421fd3..e03d76390 100644
--- a/lib_ppc/bootm.c
+++ b/lib_ppc/bootm.c
@@ -41,58 +41,107 @@
 
 #endif
 
-#ifdef CFG_INIT_RAM_LOCK
+#ifdef CONFIG_SYS_INIT_RAM_LOCK
 #include <asm/cache.h>
 #endif
 
 DECLARE_GLOBAL_DATA_PTR;
 
+extern int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
 extern ulong get_effective_memsize(void);
 static ulong get_sp (void);
 static void set_clocks_in_mhz (bd_t *kbd);
 
-#ifndef CFG_LINUX_LOWMEM_MAX_SIZE
-#define CFG_LINUX_LOWMEM_MAX_SIZE	(768*1024*1024)
+#ifndef CONFIG_SYS_LINUX_LOWMEM_MAX_SIZE
+#define CONFIG_SYS_LINUX_LOWMEM_MAX_SIZE	(768*1024*1024)
 #endif
 
-__attribute__((noinline))
-int do_bootm_linux(int flag, int argc, char *argv[], bootm_headers_t *images)
+static void boot_jump_linux(bootm_headers_t *images)
 {
-	ulong	sp;
-
-	ulong	initrd_start, initrd_end;
-	ulong	rd_len;
-	ulong	size;
-	phys_size_t bootm_size;
-
-	ulong	cmd_start, cmd_end, bootmap_base;
-	bd_t	*kbd;
 	void	(*kernel)(bd_t *, ulong r4, ulong r5, ulong r6,
 			  ulong r7, ulong r8, ulong r9);
-	int	ret;
-	ulong	of_size = images->ft_len;
-	struct lmb *lmb = &images->lmb;
-
-#if defined(CONFIG_OF_LIBFDT)
-	char	*of_flat_tree = images->ft_addr;
+#ifdef CONFIG_OF_LIBFDT
+	char *of_flat_tree = images->ft_addr;
 #endif
 
 	kernel = (void (*)(bd_t *, ulong, ulong, ulong,
 			   ulong, ulong, ulong))images->ep;
+	debug ("## Transferring control to Linux (at address %08lx) ...\n",
+		(ulong)kernel);
+
+	show_boot_progress (15);
+
+#if defined(CONFIG_SYS_INIT_RAM_LOCK) && !defined(CONFIG_E500)
+	unlock_ram_in_cache();
+#endif
+
+#if defined(CONFIG_OF_LIBFDT)
+	if (of_flat_tree) {	/* device tree; boot new style */
+		/*
+		 * Linux Kernel Parameters (passing device tree):
+		 *   r3: pointer to the fdt
+		 *   r4: 0
+		 *   r5: 0
+		 *   r6: epapr magic
+		 *   r7: size of IMA in bytes
+		 *   r8: 0
+		 *   r9: 0
+		 */
+#if defined(CONFIG_85xx) || defined(CONFIG_440)
+ #define EPAPR_MAGIC	(0x45504150)
+#else
+ #define EPAPR_MAGIC	(0x65504150)
+#endif
+
+		debug ("   Booting using OF flat tree...\n");
+		(*kernel) ((bd_t *)of_flat_tree, 0, 0, EPAPR_MAGIC,
+			   CONFIG_SYS_BOOTMAPSZ, 0, 0);
+		/* does not return */
+	} else
+#endif
+	{
+		/*
+		 * Linux Kernel Parameters (passing board info data):
+		 *   r3: ptr to board info data
+		 *   r4: initrd_start or 0 if no initrd
+		 *   r5: initrd_end - unused if r4 is 0
+		 *   r6: Start of command line string
+		 *   r7: End   of command line string
+		 *   r8: 0
+		 *   r9: 0
+		 */
+		ulong cmd_start = images->cmdline_start;
+		ulong cmd_end = images->cmdline_end;
+		ulong initrd_start = images->initrd_start;
+		ulong initrd_end = images->initrd_end;
+		bd_t *kbd = images->kbd;
+
+		debug ("   Booting using board info...\n");
+		(*kernel) (kbd, initrd_start, initrd_end,
+			   cmd_start, cmd_end, 0, 0);
+		/* does not return */
+	}
+	return ;
+}
+
+void arch_lmb_reserve(struct lmb *lmb)
+{
+	phys_size_t bootm_size;
+	ulong size, sp, bootmap_base;
 
 	bootmap_base = getenv_bootm_low();
 	bootm_size = getenv_bootm_size();
 
 #ifdef DEBUG
 	if (((u64)bootmap_base + bootm_size) >
-	    (CFG_SDRAM_BASE + (u64)gd->ram_size))
+	    (CONFIG_SYS_SDRAM_BASE + (u64)gd->ram_size))
 		puts("WARNING: bootm_low + bootm_size exceed total memory\n");
 	if ((bootmap_base + bootm_size) > get_effective_memsize())
 		puts("WARNING: bootm_low + bootm_size exceed eff. memory\n");
 #endif
 
 	size = min(bootm_size, get_effective_memsize());
-	size = min(size, CFG_LINUX_LOWMEM_MAX_SIZE);
+	size = min(size, CONFIG_SYS_LINUX_LOWMEM_MAX_SIZE);
 
 	if (size < bootm_size) {
 		ulong base = bootmap_base + size;
@@ -105,7 +154,7 @@ int do_bootm_linux(int flag, int argc, char *argv[], bootm_headers_t *images)
 	 *
 	 * Allocate space for command line and board info - the
 	 * address should be as high as possible within the reach of
-	 * the kernel (see CFG_BOOTMAPSZ settings), but in unused
+	 * the kernel (see CONFIG_SYS_BOOTMAPSZ settings), but in unused
 	 * memory, which means far enough below the current stack
 	 * pointer.
 	 */
@@ -114,128 +163,169 @@ int do_bootm_linux(int flag, int argc, char *argv[], bootm_headers_t *images)
 
 	/* adjust sp by 1K to be safe */
 	sp -= 1024;
-	lmb_reserve(lmb, sp, (CFG_SDRAM_BASE + get_effective_memsize() - sp));
+	lmb_reserve(lmb, sp, (CONFIG_SYS_SDRAM_BASE + get_effective_memsize() - sp));
+
+	return ;
+}
+
+static void boot_prep_linux(void)
+{
+#if (CONFIG_NUM_CPUS > 1)
+	/* if we are MP make sure to flush the dcache() to any changes are made
+	 * visibile to all other cores */
+	flush_dcache();
+#endif
+	return ;
+}
+
+static int boot_cmdline_linux(bootm_headers_t *images)
+{
+	ulong bootmap_base = getenv_bootm_low();
+	ulong of_size = images->ft_len;
+	struct lmb *lmb = &images->lmb;
+	ulong *cmd_start = &images->cmdline_start;
+	ulong *cmd_end = &images->cmdline_end;
+
+	int ret = 0;
 
 	if (!of_size) {
 		/* allocate space and init command line */
-		ret = boot_get_cmdline (lmb, &cmd_start, &cmd_end, bootmap_base);
+		ret = boot_get_cmdline (lmb, cmd_start, cmd_end, bootmap_base);
 		if (ret) {
 			puts("ERROR with allocation of cmdline\n");
-			goto error;
+			return ret;
 		}
+	}
+
+	return ret;
+}
+
+static int boot_bd_t_linux(bootm_headers_t *images)
+{
+	ulong bootmap_base = getenv_bootm_low();
+	ulong of_size = images->ft_len;
+	struct lmb *lmb = &images->lmb;
+	bd_t **kbd = &images->kbd;
+
+	int ret = 0;
 
+	if (!of_size) {
 		/* allocate space for kernel copy of board info */
-		ret = boot_get_kbd (lmb, &kbd, bootmap_base);
+		ret = boot_get_kbd (lmb, kbd, bootmap_base);
 		if (ret) {
 			puts("ERROR with allocation of kernel bd\n");
-			goto error;
+			return ret;
 		}
-		set_clocks_in_mhz(kbd);
+		set_clocks_in_mhz(*kbd);
 	}
 
+	return ret;
+}
+
+static int boot_body_linux(bootm_headers_t *images)
+{
+	ulong rd_len;
+	struct lmb *lmb = &images->lmb;
+	ulong *initrd_start = &images->initrd_start;
+	ulong *initrd_end = &images->initrd_end;
+#if defined(CONFIG_OF_LIBFDT)
+	ulong bootmap_base = getenv_bootm_low();
+	ulong of_size = images->ft_len;
+	char **of_flat_tree = &images->ft_addr;
+#endif
+
+	int ret;
+
+	/* allocate space and init command line */
+	ret = boot_cmdline_linux(images);
+	if (ret)
+		return ret;
+
+	/* allocate space for kernel copy of board info */
+	ret = boot_bd_t_linux(images);
+	if (ret)
+		return ret;
+
 	rd_len = images->rd_end - images->rd_start;
+	ret = boot_ramdisk_high (lmb, images->rd_start, rd_len, initrd_start, initrd_end);
+	if (ret)
+		return ret;
 
 #if defined(CONFIG_OF_LIBFDT)
-	ret = boot_relocate_fdt(lmb, bootmap_base, &of_flat_tree, &of_size);
+	ret = boot_relocate_fdt(lmb, bootmap_base, of_flat_tree, &of_size);
 	if (ret)
-		goto error;
+		return ret;
 
 	/*
 	 * Add the chosen node if it doesn't exist, add the env and bd_t
 	 * if the user wants it (the logic is in the subroutines).
 	 */
 	if (of_size) {
-		/* pass in dummy initrd info, we'll fix up later */
-		if (fdt_chosen(of_flat_tree, images->rd_start, images->rd_end, 0) < 0) {
+		if (fdt_chosen(*of_flat_tree, 1) < 0) {
 			puts ("ERROR: ");
 			puts ("/chosen node create failed");
 			puts (" - must RESET the board to recover.\n");
-			goto error;
+			return -1;
 		}
 #ifdef CONFIG_OF_BOARD_SETUP
 		/* Call the board-specific fixup routine */
-		ft_board_setup(of_flat_tree, gd->bd);
+		ft_board_setup(*of_flat_tree, gd->bd);
 #endif
-	}
 
-	/* Fixup the fdt memreserve now that we know how big it is */
-	if (of_flat_tree) {
 		/* Delete the old LMB reservation */
-		lmb_free(lmb, (phys_addr_t)(u32)of_flat_tree,
-				(phys_size_t)fdt_totalsize(of_flat_tree));
+		lmb_free(lmb, (phys_addr_t)(u32)*of_flat_tree,
+				(phys_size_t)fdt_totalsize(*of_flat_tree));
 
-		ret = fdt_resize(of_flat_tree);
+		ret = fdt_resize(*of_flat_tree);
 		if (ret < 0)
-			goto error;
+			return ret;
 		of_size = ret;
 
+		if (*initrd_start && *initrd_end)
+			of_size += FDT_RAMDISK_OVERHEAD;
 		/* Create a new LMB reservation */
-		lmb_reserve(lmb, (ulong)of_flat_tree, of_size);
+		lmb_reserve(lmb, (ulong)*of_flat_tree, of_size);
+
+		/* fixup the initrd now that we know where it should be */
+		if (*initrd_start && *initrd_end)
+			fdt_initrd(*of_flat_tree, *initrd_start, *initrd_end, 1);
 	}
 #endif	/* CONFIG_OF_LIBFDT */
+	return 0;
+}
 
-	ret = boot_ramdisk_high (lmb, images->rd_start, rd_len, &initrd_start, &initrd_end);
-	if (ret)
-		goto error;
-
-#if defined(CONFIG_OF_LIBFDT)
-	/* fixup the initrd now that we know where it should be */
-	if ((of_flat_tree) && (initrd_start && initrd_end))
-		fdt_initrd(of_flat_tree, initrd_start, initrd_end, 1);
-#endif
-	debug ("## Transferring control to Linux (at address %08lx) ...\n",
-		(ulong)kernel);
+__attribute__((noinline))
+int do_bootm_linux(int flag, int argc, char *argv[], bootm_headers_t *images)
+{
+	int	ret;
 
-	show_boot_progress (15);
+	if (flag & BOOTM_STATE_OS_CMDLINE) {
+		boot_cmdline_linux(images);
+		return 0;
+	}
 
-#if defined(CFG_INIT_RAM_LOCK) && !defined(CONFIG_E500)
-	unlock_ram_in_cache();
-#endif
+	if (flag & BOOTM_STATE_OS_BD_T) {
+		boot_bd_t_linux(images);
+		return 0;
+	}
 
-#if defined(CONFIG_OF_LIBFDT)
-	if (of_flat_tree) {	/* device tree; boot new style */
-		/*
-		 * Linux Kernel Parameters (passing device tree):
-		 *   r3: pointer to the fdt
-		 *   r4: 0
-		 *   r5: 0
-		 *   r6: epapr magic
-		 *   r7: size of IMA in bytes
-		 *   r8: 0
-		 *   r9: 0
-		 */
-#if defined(CONFIG_85xx) || defined(CONFIG_440)
- #define EPAPR_MAGIC	(0x45504150)
-#else
- #define EPAPR_MAGIC	(0x65504150)
-#endif
+	if (flag & BOOTM_STATE_OS_PREP) {
+		boot_prep_linux();
+		return 0;
+	}
 
-		debug ("   Booting using OF flat tree...\n");
-		(*kernel) ((bd_t *)of_flat_tree, 0, 0, EPAPR_MAGIC,
-			   CFG_BOOTMAPSZ, 0, 0);
-		/* does not return */
-	} else
-#endif
-	{
-		/*
-		 * Linux Kernel Parameters (passing board info data):
-		 *   r3: ptr to board info data
-		 *   r4: initrd_start or 0 if no initrd
-		 *   r5: initrd_end - unused if r4 is 0
-		 *   r6: Start of command line string
-		 *   r7: End   of command line string
-		 *   r8: 0
-		 *   r9: 0
-		 */
-		debug ("   Booting using board info...\n");
-		(*kernel) (kbd, initrd_start, initrd_end,
-			   cmd_start, cmd_end, 0, 0);
-		/* does not return */
+	if (flag & BOOTM_STATE_OS_GO) {
+		boot_jump_linux(images);
+		return 0;
 	}
-	return 1;
 
-error:
-	return 1;
+	boot_prep_linux();
+	ret = boot_body_linux(images);
+	if (ret)
+		return ret;
+	boot_jump_linux(images);
+
+	return 0;
 }
 
 static ulong get_sp (void)
diff --git a/lib_ppc/cache.c b/lib_ppc/cache.c
index 5bfb22070..1292b71e6 100644
--- a/lib_ppc/cache.c
+++ b/lib_ppc/cache.c
@@ -25,29 +25,27 @@
 #include <asm/cache.h>
 #include <watchdog.h>
 
-void flush_cache (ulong start_addr, ulong size)
+void flush_cache(ulong start_addr, ulong size)
 {
 #ifndef CONFIG_5xx
-	ulong addr, end_addr = start_addr + size;
+	ulong addr, start, end;
 
-	if (CFG_CACHELINE_SIZE) {
-		addr = start_addr & (CFG_CACHELINE_SIZE - 1);
-		for (addr = start_addr;
-		     addr < end_addr;
-		     addr += CFG_CACHELINE_SIZE) {
-			asm ("dcbst 0,%0": :"r" (addr));
-			WATCHDOG_RESET();
-		}
-		asm ("sync");	/* Wait for all dcbst to complete on bus */
+	start = start_addr & ~(CONFIG_SYS_CACHELINE_SIZE - 1);
+	end = start_addr + size - 1;
 
-		for (addr = start_addr;
-		     addr < end_addr;
-		     addr += CFG_CACHELINE_SIZE) {
-			asm ("icbi 0,%0": :"r" (addr));
-			WATCHDOG_RESET();
-		}
+	for (addr = start; addr <= end; addr += CONFIG_SYS_CACHELINE_SIZE) {
+		asm volatile("dcbst 0,%0" : : "r" (addr) : "memory");
+		WATCHDOG_RESET();
 	}
-	asm ("sync");		/* Always flush prefetch queue in any case */
-	asm ("isync");
+	/* wait for all dcbst to complete on bus */
+	asm volatile("sync" : : : "memory");
+
+	for (addr = start; addr <= end; addr += CONFIG_SYS_CACHELINE_SIZE) {
+		asm volatile("icbi 0,%0" : : "r" (addr) : "memory");
+		WATCHDOG_RESET();
+	}
+	asm volatile("sync" : : : "memory");
+	/* flush prefetch queue */
+	asm volatile("isync" : : : "memory");
 #endif
 }
diff --git a/lib_ppc/extable.c b/lib_ppc/extable.c
index 2d995fa30..91e2b3d24 100644
--- a/lib_ppc/extable.c
+++ b/lib_ppc/extable.c
@@ -53,7 +53,7 @@ search_one_table(const struct exception_table_entry *first,
 		 unsigned long value)
 {
 	long diff;
-	if ((ulong) first > CFG_MONITOR_BASE) {
+	if ((ulong) first > CONFIG_SYS_MONITOR_BASE) {
 		/* exception occurs in FLASH, before u-boot relocation.
 		 * No relocation offset is needed.
 		 */
@@ -87,7 +87,7 @@ search_exception_table(unsigned long addr)
 	/* There is only the kernel to search.  */
 	ret = search_one_table(__start___ex_table, __stop___ex_table-1, addr);
 	/* if the serial port does not hang in exception, printf can be used */
-#if !defined(CFG_SERIAL_HANG_IN_EXCEPTION)
+#if !defined(CONFIG_SYS_SERIAL_HANG_IN_EXCEPTION)
 	if (ex_tab_message)
 		debug("Bus Fault @ 0x%08lx, fixup 0x%08lx\n", addr, ret);
 #endif
diff --git a/lib_ppc/interrupts.c b/lib_ppc/interrupts.c
index b803952ba..f6031707a 100644
--- a/lib_ppc/interrupts.c
+++ b/lib_ppc/interrupts.c
@@ -32,11 +32,16 @@
 #endif
 
 #ifdef CONFIG_SHOW_ACTIVITY
-	extern void board_show_activity (ulong);
+void board_show_activity (ulong) __attribute__((weak, alias("__board_show_activity")));
+
+void __board_show_activity (ulong dummy)
+{
+	return;
+}
 #endif /* CONFIG_SHOW_ACTIVITY */
 
-#ifndef CFG_WATCHDOG_FREQ
-#define CFG_WATCHDOG_FREQ (CFG_HZ / 2)
+#ifndef CONFIG_SYS_WATCHDOG_FREQ
+#define CONFIG_SYS_WATCHDOG_FREQ (CONFIG_SYS_HZ / 2)
 #endif
 
 extern int interrupt_init_cpu (unsigned *);
@@ -119,7 +124,7 @@ void timer_interrupt (struct pt_regs *regs)
 	timestamp++;
 
 #if defined(CONFIG_WATCHDOG) || defined (CONFIG_HW_WATCHDOG)
-	if ((timestamp % (CFG_WATCHDOG_FREQ)) == 0)
+	if ((timestamp % (CONFIG_SYS_WATCHDOG_FREQ)) == 0)
 		WATCHDOG_RESET ();
 #endif    /* CONFIG_WATCHDOG || CONFIG_HW_WATCHDOG */
 
diff --git a/lib_ppc/time.c b/lib_ppc/time.c
index f093a5785..173ffab3e 100644
--- a/lib_ppc/time.c
+++ b/lib_ppc/time.c
@@ -89,7 +89,7 @@ unsigned long ticks2usec(unsigned long ticks)
 int init_timebase (void)
 {
 #if defined(CONFIG_5xx) || defined(CONFIG_8xx)
-	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
 
 	/* unlock */
 	immap->im_sitk.sitk_tbk = KAPWR_KEY;
diff --git a/lib_sh/Makefile b/lib_sh/Makefile
index 40343812f..f7c647942 100644
--- a/lib_sh/Makefile
+++ b/lib_sh/Makefile
@@ -26,7 +26,11 @@ SOBJS-y	+=
 
 COBJS-y	+= board.o
 COBJS-y	+= bootm.o
-# COBJS-y	+= time.o
+ifeq ($(CONFIG_SH2),y)
+COBJS-y	+= time_sh2.o
+else
+COBJS-y	+= time.o
+endif
 
 SRCS	:= $(SOBJS-y:.o=.S) $(COBJS-y:.o=.c)
 OBJS	:= $(addprefix $(obj),$(SOBJS-y) $(COBJS-y))
diff --git a/lib_sh/board.c b/lib_sh/board.c
index eb81bd97e..d4cc85cad 100644
--- a/lib_sh/board.c
+++ b/lib_sh/board.c
@@ -22,7 +22,9 @@
 #include <command.h>
 #include <malloc.h>
 #include <devices.h>
+#include <timestamp.h>
 #include <version.h>
+#include <watchdog.h>
 #include <net.h>
 #include <environment.h>
 
@@ -30,28 +32,27 @@ extern void malloc_bin_reloc (void);
 extern int cpu_init(void);
 extern int board_init(void);
 extern int dram_init(void);
-extern int watchdog_init(void);
 extern int timer_init(void);
 
-const char version_string[] = U_BOOT_VERSION" (" __DATE__ " - " __TIME__ ")";
+const char version_string[] = U_BOOT_VERSION" ("U_BOOT_DATE" - "U_BOOT_TIME")";
 
-unsigned long monitor_flash_len = CFG_MONITOR_LEN;
+unsigned long monitor_flash_len = CONFIG_SYS_MONITOR_LEN;
 
 static unsigned long mem_malloc_start;
 static unsigned long mem_malloc_end;
 static unsigned long mem_malloc_brk;
 
-static void mem_malloc_init (void)
+static void mem_malloc_init(void)
 {
 
-	mem_malloc_start = (TEXT_BASE - CFG_GBL_DATA_SIZE - CFG_MALLOC_LEN);
-	mem_malloc_end = (mem_malloc_start + CFG_MALLOC_LEN - 16);
+	mem_malloc_start = (TEXT_BASE - CONFIG_SYS_GBL_DATA_SIZE - CONFIG_SYS_MALLOC_LEN);
+	mem_malloc_end = (mem_malloc_start + CONFIG_SYS_MALLOC_LEN - 16);
 	mem_malloc_brk = mem_malloc_start;
-	memset ((void *) mem_malloc_start, 0,
+	memset((void *) mem_malloc_start, 0,
 		(mem_malloc_end - mem_malloc_start));
 }
 
-void *sbrk (ptrdiff_t increment)
+void *sbrk(ptrdiff_t increment)
 {
 	unsigned long old = mem_malloc_brk;
 	unsigned long new = old + increment;
@@ -70,37 +71,45 @@ static int sh_flash_init(void)
 	DECLARE_GLOBAL_DATA_PTR;
 
 	gd->bd->bi_flashsize = flash_init();
-	printf("FLASH: %dMB\n", gd->bd->bi_flashsize / (1024*1024));
+	printf("FLASH: %ldMB\n", gd->bd->bi_flashsize / (1024*1024));
 
 	return 0;
 }
 
 #if defined(CONFIG_CMD_NAND)
-#include <nand.h>
-static int sh_nand_init(void)
-{
-	printf("NAND: ");
-	nand_init();	/* go init the NAND */
-	return 0;
-}
+# include <nand.h>
+# define INIT_FUNC_NAND_INIT nand_init,
+#else
+# define INIT_FUNC_NAND_INIT
 #endif /* CONFIG_CMD_NAND */
 
+#if defined(CONFIG_WATCHDOG)
+extern int watchdog_init(void);
+extern int watchdog_disable(void);
+# define INIT_FUNC_WATCHDOG_INIT	watchdog_init,
+# define WATCHDOG_DISABLE       	watchdog_disable
+#else
+# define INIT_FUNC_WATCHDOG_INIT
+# define WATCHDOG_DISABLE
+#endif /* CONFIG_WATCHDOG */
+
 #if defined(CONFIG_CMD_IDE)
-#include <ide.h>
-static int sh_marubun_init(void)
-{
-	puts ("IDE:   ");
-	ide_init();
-	return 0;
-}
-#endif /* (CONFIG_CMD_IDE) */
+# include <ide.h>
+# define INIT_FUNC_IDE_INIT	ide_init,
+#else
+# define INIT_FUNC_IDE_INIT
+#endif /* CONFIG_CMD_IDE */
 
 #if defined(CONFIG_PCI)
+#include <pci.h>
 static int sh_pci_init(void)
 {
 	pci_init();
 	return 0;
 }
+# define INIT_FUNC_PCI_INIT sh_pci_init,
+#else
+# define INIT_FUNC_PCI_INIT
 #endif /* CONFIG_PCI */
 
 static int sh_mem_env_init(void)
@@ -123,7 +132,8 @@ static int sh_net_init(void)
 	s = getenv("ethaddr");
 	for (i = 0; i < 6; ++i) {
 		gd->bd->bi_enetaddr[i] = s ? simple_strtoul(s, &e, 16) : 0;
-		if (s) s = (*e) ? e + 1 : e;
+		if (s)
+			s = (*e) ? e + 1 : e;
 	}
 
 	return 0;
@@ -136,24 +146,20 @@ init_fnc_t *init_sequence[] =
 {
 	cpu_init,		/* basic cpu dependent setup */
 	board_init,		/* basic board dependent setup */
-	interrupt_init,		/* set up exceptions */
+	interrupt_init,	/* set up exceptions */
 	env_init,		/* event init */
-	serial_init,		/* SCIF init */
-	watchdog_init,		/* watchdog init */
+	serial_init,	/* SCIF init */
+	INIT_FUNC_WATCHDOG_INIT	/* watchdog init */
 	console_init_f,
 	display_options,
 	checkcpu,
 	checkboard,		/* Check support board */
 	dram_init,		/* SDRAM init */
 	timer_init,		/* SuperH Timer (TCNT0 only) init */
-	sh_flash_init,		/* Flash memory(NOR) init*/
+	sh_flash_init,	/* Flash memory(NOR) init*/
 	sh_mem_env_init,
-#if defined(CONFIG_CMD_NAND)
-	sh_nand_init,		/* Flash memory (NAND) init */
-#endif
-#if defined(CONFIG_PCI)
-	sh_pci_init,		/* PCI Init */
-#endif
+	INIT_FUNC_NAND_INIT/* Flash memory (NAND) init */
+	INIT_FUNC_PCI_INIT	/* PCI init */
 	devices_init,
 	console_init_r,
 	interrupt_init,
@@ -166,58 +172,72 @@ init_fnc_t *init_sequence[] =
 	NULL			/* Terminate this list */
 };
 
-void sh_generic_init (void)
+void sh_generic_init(void)
 {
 	DECLARE_GLOBAL_DATA_PTR;
 
 	bd_t *bd;
 	init_fnc_t **init_fnc_ptr;
-	int i;
-	char *s;
 
-	memset (gd, 0, CFG_GBL_DATA_SIZE);
+	memset(gd, 0, CONFIG_SYS_GBL_DATA_SIZE);
 
 	gd->flags |= GD_FLG_RELOC;	/* tell others: relocation done */
 
-	gd->bd = (bd_t *) (gd + 1);	/* At end of global data */
+	gd->bd = (bd_t *)(gd + 1);	/* At end of global data */
 	gd->baudrate = CONFIG_BAUDRATE;
 
 	gd->cpu_clk = CONFIG_SYS_CLK_FREQ;
 
 	bd = gd->bd;
-	bd->bi_memstart	= CFG_SDRAM_BASE;
-	bd->bi_memsize = CFG_SDRAM_SIZE;
-	bd->bi_flashstart = CFG_FLASH_BASE;
-#if defined(CFG_SRAM_BASE) && defined(CFG_SRAM_SIZE)
-	bd->bi_sramstart= CFG_SRAM_BASE;
-	bd->bi_sramsize	= CFG_SRAM_SIZE;
+	bd->bi_memstart	= CONFIG_SYS_SDRAM_BASE;
+	bd->bi_memsize = CONFIG_SYS_SDRAM_SIZE;
+	bd->bi_flashstart = CONFIG_SYS_FLASH_BASE;
+#if defined(CONFIG_SYS_SRAM_BASE) && defined(CONFIG_SYS_SRAM_SIZE)
+	bd->bi_sramstart = CONFIG_SYS_SRAM_BASE;
+	bd->bi_sramsize	= CONFIG_SYS_SRAM_SIZE;
 #endif
 	bd->bi_baudrate	= CONFIG_BAUDRATE;
 
-	for (init_fnc_ptr = init_sequence; *init_fnc_ptr; ++init_fnc_ptr , i++) {
-		if ((*init_fnc_ptr) () != 0) {
+	for (init_fnc_ptr = init_sequence; *init_fnc_ptr; ++init_fnc_ptr) {
+		WATCHDOG_RESET();
+		if ((*init_fnc_ptr) () != 0)
 			hang();
-		}
 	}
 
-#if defined(CONFIG_CMD_NET)
-	puts ("Net:   ");
-	eth_initialize(gd->bd);
+#ifdef CONFIG_WATCHDOG
+	/* disable watchdog if environment is set */
+	{
+		char *s = getenv("watchdog");
+		if (s != NULL)
+			if (strncmp(s, "off", 3) == 0)
+				WATCHDOG_DISABLE();
+	}
+#endif /* CONFIG_WATCHDOG*/
 
-	if ((s = getenv ("bootfile")) != NULL) {
-		copy_filename (BootFile, s, sizeof (BootFile));
+
+#if defined(CONFIG_CMD_NET)
+	{
+		char *s;
+		puts("Net:   ");
+		eth_initialize(gd->bd);
+
+		s = getenv("bootfile");
+		if (s != NULL)
+			copy_filename(BootFile, s, sizeof(BootFile));
 	}
 #endif /* CONFIG_CMD_NET */
 
 	while (1) {
+		WATCHDOG_RESET();
 		main_loop();
 	}
 }
 
 /***********************************************************************/
 
-void hang (void)
+void hang(void)
 {
-	puts ("Board ERROR\n");
-	for (;;);
+	puts("Board ERROR\n");
+	for (;;)
+		;
 }
diff --git a/lib_sh/bootm.c b/lib_sh/bootm.c
index e92c84831..ae1f869f1 100644
--- a/lib_sh/bootm.c
+++ b/lib_sh/bootm.c
@@ -2,6 +2,9 @@
  * (C) Copyright 2003
  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
  *
+ * (c) Copyright 2008 Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+ * (c) Copyright 2008 Renesas Solutions Corp.
+ *
  * See file CREDITS for list of people who contributed to this
  * project.
  *
@@ -25,51 +28,43 @@
 #include <command.h>
 #include <asm/byteorder.h>
 
-/* The SH kernel reads arguments from the empty zero page at location
- * 0 at the start of SDRAM. The following are copied from
- * arch/sh/kernel/setup.c and may require tweaking if the kernel sources
- * change.
- */
-#define PARAM	((unsigned char *)CFG_SDRAM_BASE + 0x1000)
-
-#define MOUNT_ROOT_RDONLY (*(unsigned long *) (PARAM+0x000))
-#define RAMDISK_FLAGS (*(unsigned long *) (PARAM+0x004))
-#define ORIG_ROOT_DEV (*(unsigned long *) (PARAM+0x008))
-#define LOADER_TYPE (*(unsigned long *) (PARAM+0x00c))
-#define INITRD_START (*(unsigned long *) (PARAM+0x010))
-#define INITRD_SIZE (*(unsigned long *) (PARAM+0x014))
-/* ... */
-#define COMMAND_LINE ((char *) (PARAM+0x100))
-
-#define RAMDISK_IMAGE_START_MASK	0x07FF
-
-#ifdef CFG_DEBUG
-static void hexdump (unsigned char *buf, int len)
+#ifdef CONFIG_SYS_DEBUG
+static void hexdump(unsigned char *buf, int len)
 {
 	int i;
 
 	for (i = 0; i < len; i++) {
 		if ((i % 16) == 0)
-			printf ("%s%08x: ", i ? "\n" : "", (unsigned int) &buf[i]);
-		printf ("%02x ", buf[i]);
+			printf("%s%08x: ", i ? "\n" : "",
+							(unsigned int)&buf[i]);
+		printf("%02x ", buf[i]);
 	}
-	printf ("\n");
+	printf("\n");
 }
 #endif
 
 int do_bootm_linux(int flag, int argc, char *argv[], bootm_headers_t *images)
 {
-	char	*bootargs = getenv("bootargs");
-
+	/* Linux kernel load address */
 	void (*kernel) (void) = (void (*)(void))images->ep;
+	/* empty_zero_page */
+	unsigned char *param
+		= (unsigned char *)image_get_load(images->legacy_hdr_os);
+	/* Linux kernel command line */
+	char *cmdline = (char *)param + 0x100;
+	/* PAGE_SIZE */
+	unsigned long size = images->ep - (unsigned long)param;
+	char *bootargs = getenv("bootargs");
+
+	if ((flag != 0) && (flag != BOOTM_STATE_OS_GO))
+		return 1;
 
 	/* Setup parameters */
-	memset(PARAM, 0, 0x1000);	/* Clear zero page */
-	strcpy(COMMAND_LINE, bootargs);
+	memset(param, 0, size);	/* Clear zero page */
+	strcpy(cmdline, bootargs);
 
 	kernel();
 	/* does not return */
 
-error:
 	return 1;
 }
diff --git a/lib_sh/time.c b/lib_sh/time.c
index 9c1dc509b..2bd771528 100644
--- a/lib_sh/time.c
+++ b/lib_sh/time.c
@@ -1,6 +1,9 @@
 /*
- * Copyright (c) 2007
- * Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+ * (C) Copyright 2007-2008
+ * Nobobuhiro Iwamatsu <iwamatsu@nigauri.org>
+ *
+ * (C) Copyright 2003
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
  *
  * See file CREDITS for list of people who contributed to this
  * project.
@@ -23,53 +26,99 @@
 
 #include <common.h>
 #include <asm/processor.h>
+#include <asm/io.h>
+
+#define TMU_MAX_COUNTER (~0UL)
+static int clk_adj = 1;
 
 static void tmu_timer_start (unsigned int timer)
 {
 	if (timer > 2)
 		return;
+	writeb(readb(TSTR) | (1 << timer), TSTR);
+}
 
-	*((volatile unsigned char *) TSTR0) |= (1 << timer);
+static void tmu_timer_stop (unsigned int timer)
+{
+	if (timer > 2)
+		return;
+	writeb(readb(TSTR) & ~(1 << timer), TSTR);
 }
 
 int timer_init (void)
 {
-	*(volatile u16 *)TCR0 = 0;
+	/* Divide clock by TMU_CLK_DIVIDER */
+	u16 bit = 0;
+	switch( TMU_CLK_DIVIDER ){
+	case 4:
+		bit = 0;
+		break;
+	case 16:
+		bit = 1;
+		break;
+	case 64: bit = 2;
+		break;
+	case 256:
+		bit = 3;
+		break;
+	case 1024:
+		bit = 4;
+		break;
+	default:
+		bit = 0;
+		break;
+	}
+	writew(readw(TCR0) | bit, TCR0);
+
+	/* Clock adjustment calc */
+	clk_adj = (int)(1.0/((1.0/CONFIG_SYS_HZ)*1000000));
+	if (clk_adj < 1)
+		clk_adj = 1;
+
+	tmu_timer_stop(0);
+	tmu_timer_start(0);
 
-	tmu_timer_start (0);
 	return 0;
 }
 
 unsigned long long get_ticks (void)
 {
-	return (0 - *((volatile unsigned int *) TCNT0));
+	return 0 - readl(TCNT0);
 }
 
-unsigned long get_timer (unsigned long base)
+static unsigned long get_usec (void)
 {
-	return ((0 - *((volatile unsigned int *) TCNT0)) - base);
+	return (0 - readl(TCNT0));
 }
 
-void set_timer (unsigned long t)
+void udelay (unsigned long usec)
 {
-	*((volatile unsigned int *) TCNT0) = (0 - t);
+	unsigned int start = get_usec();
+	unsigned int end = start + (usec * clk_adj);
+
+	while (get_usec() < end)
+		continue;
 }
 
-void reset_timer (void)
+unsigned long get_timer (unsigned long base)
 {
-	set_timer (0);
+	/*  return msec */
+	return ((get_usec()/clk_adj)/1000) - base;
 }
 
-void udelay (unsigned long usec)
+void set_timer (unsigned long t)
 {
-	unsigned int start = get_timer (0);
-	unsigned int end = start + (usec * ((CFG_HZ + 500000) / 1000000));
+	writel((0 - t), TCNT0);
+}
 
-	while (get_timer (0) < end)
-		continue;
+void reset_timer (void)
+{
+	tmu_timer_stop(0);
+	set_timer (0);
+	tmu_timer_start(0);
 }
 
 unsigned long get_tbclk (void)
 {
-	return CFG_HZ;
+	return CONFIG_SYS_HZ;
 }
diff --git a/cpu/sh2/time.c b/lib_sh/time_sh2.c
index d6eb0cb10..4f893c87b 100644
--- a/cpu/sh2/time.c
+++ b/lib_sh/time_sh2.c
@@ -65,8 +65,8 @@ unsigned long long get_ticks(void)
 	return cmt0_timer;
 }
 
-static vu_long cmcnt;
-ulong get_timer(ulong base)
+static vu_long cmcnt = 0;
+static unsigned long get_usec (void)
 {
 	ulong data = readw(CMCNT_0);
 
@@ -81,7 +81,13 @@ ulong get_timer(ulong base)
 		cmt0_timer += cmcnt;
 
 	cmcnt = data;
-	return cmt0_timer - base;
+	return cmt0_timer;
+}
+
+/* return msec */
+ulong get_timer(ulong base)
+{
+	return (get_usec()/1000) - base;
 }
 
 void set_timer(ulong t)
@@ -99,13 +105,13 @@ void reset_timer(void)
 
 void udelay(unsigned long usec)
 {
-	unsigned int start = get_timer(0);
+	unsigned long end = get_usec() + usec;
 
-	while (get_timer((ulong) start) < (usec * (CFG_HZ / 1000000)))
+	while (get_usec() < end)
 		continue;
 }
 
 unsigned long get_tbclk(void)
 {
-	return CFG_HZ;
+	return CONFIG_SYS_HZ;
 }
diff --git a/lib_sparc/board.c b/lib_sparc/board.c
index 205a8ca53..e972d3e2c 100644
--- a/lib_sparc/board.c
+++ b/lib_sparc/board.c
@@ -66,7 +66,7 @@ extern int prom_init(void);
 void doc_init(void);
 #endif
 
-#if !defined(CFG_NO_FLASH)
+#if !defined(CONFIG_SYS_NO_FLASH)
 static char *failed = "*** failed ***\n";
 #endif
 
@@ -91,8 +91,8 @@ static ulong mem_malloc_brk = 0;
  */
 static void mem_malloc_init(void)
 {
-	mem_malloc_start = CFG_MALLOC_BASE;
-	mem_malloc_end = CFG_MALLOC_END;
+	mem_malloc_start = CONFIG_SYS_MALLOC_BASE;
+	mem_malloc_end = CONFIG_SYS_MALLOC_END;
 	mem_malloc_brk = mem_malloc_start;
 	memset((void *)mem_malloc_start, 0, mem_malloc_end - mem_malloc_start);
 }
@@ -211,11 +211,11 @@ void board_init_f(ulong bootflag)
 	int i;
 	char *e;
 
-#ifndef CFG_NO_FLASH
+#ifndef CONFIG_SYS_NO_FLASH
 	ulong flash_size;
 #endif
 
-	gd = (gd_t *) (CFG_GBL_DATA_OFFSET);
+	gd = (gd_t *) (CONFIG_SYS_GBL_DATA_OFFSET);
 
 	/* Clear initial global data */
 	memset((void *)gd, 0, sizeof(gd_t));
@@ -225,18 +225,18 @@ void board_init_f(ulong bootflag)
 	gd->cpu_clk = CONFIG_SYS_CLK_FREQ;
 
 	bd = gd->bd;
-	bd->bi_memstart = CFG_RAM_BASE;
-	bd->bi_memsize = CFG_RAM_SIZE;
-	bd->bi_flashstart = CFG_FLASH_BASE;
-#if	defined(CFG_SRAM_BASE) && defined(CFG_SRAM_SIZE)
-	bd->bi_sramstart = CFG_SRAM_BASE;
-	bd->bi_sramsize = CFG_SRAM_SIZE;
+	bd->bi_memstart = CONFIG_SYS_RAM_BASE;
+	bd->bi_memsize = CONFIG_SYS_RAM_SIZE;
+	bd->bi_flashstart = CONFIG_SYS_FLASH_BASE;
+#if	defined(CONFIG_SYS_SRAM_BASE) && defined(CONFIG_SYS_SRAM_SIZE)
+	bd->bi_sramstart = CONFIG_SYS_SRAM_BASE;
+	bd->bi_sramsize = CONFIG_SYS_SRAM_SIZE;
 #endif
 	bd->bi_baudrate = CONFIG_BAUDRATE;
 	bd->bi_bootflags = bootflag;	/* boot / reboot flag (for LynxOS)    */
 
 	gd->flags |= GD_FLG_RELOC;	/* tell others: relocation done */
-	gd->reloc_off = CFG_RELOC_MONITOR_BASE - CFG_MONITOR_BASE;
+	gd->reloc_off = CONFIG_SYS_RELOC_MONITOR_BASE - CONFIG_SYS_MONITOR_BASE;
 
 	for (init_fnc_ptr = init_sequence, j = 0; *init_fnc_ptr;
 	     ++init_fnc_ptr, j++) {
@@ -266,18 +266,18 @@ void board_init_f(ulong bootflag)
 	 *  - board info struct
 	 */
 #ifdef DEBUG_MEM_LAYOUT
-	printf("CFG_MONITOR_BASE:       0x%lx\n", CFG_MONITOR_BASE);
-	printf("CFG_ENV_ADDR:           0x%lx\n", CFG_ENV_ADDR);
-	printf("CFG_RELOC_MONITOR_BASE: 0x%lx (%d)\n", CFG_RELOC_MONITOR_BASE,
-	       CFG_MONITOR_LEN);
-	printf("CFG_MALLOC_BASE:        0x%lx (%d)\n", CFG_MALLOC_BASE,
-	       CFG_MALLOC_LEN);
-	printf("CFG_INIT_SP_OFFSET:     0x%lx (%d)\n", CFG_INIT_SP_OFFSET,
-	       CFG_STACK_SIZE);
-	printf("CFG_PROM_OFFSET:        0x%lx (%d)\n", CFG_PROM_OFFSET,
-	       CFG_PROM_SIZE);
-	printf("CFG_GBL_DATA_OFFSET:    0x%lx (%d)\n", CFG_GBL_DATA_OFFSET,
-	       CFG_GBL_DATA_SIZE);
+	printf("CONFIG_SYS_MONITOR_BASE:       0x%lx\n", CONFIG_SYS_MONITOR_BASE);
+	printf("CONFIG_ENV_ADDR:           0x%lx\n", CONFIG_ENV_ADDR);
+	printf("CONFIG_SYS_RELOC_MONITOR_BASE: 0x%lx (%d)\n", CONFIG_SYS_RELOC_MONITOR_BASE,
+	       CONFIG_SYS_MONITOR_LEN);
+	printf("CONFIG_SYS_MALLOC_BASE:        0x%lx (%d)\n", CONFIG_SYS_MALLOC_BASE,
+	       CONFIG_SYS_MALLOC_LEN);
+	printf("CONFIG_SYS_INIT_SP_OFFSET:     0x%lx (%d)\n", CONFIG_SYS_INIT_SP_OFFSET,
+	       CONFIG_SYS_STACK_SIZE);
+	printf("CONFIG_SYS_PROM_OFFSET:        0x%lx (%d)\n", CONFIG_SYS_PROM_OFFSET,
+	       CONFIG_SYS_PROM_SIZE);
+	printf("CONFIG_SYS_GBL_DATA_OFFSET:    0x%lx (%d)\n", CONFIG_SYS_GBL_DATA_OFFSET,
+	       CONFIG_SYS_GBL_DATA_SIZE);
 #endif
 
 #ifdef CONFIG_POST
@@ -305,7 +305,7 @@ void board_init_f(ulong bootflag)
 			addr = (ulong) (cmdtp->usage) + gd->reloc_off;
 			cmdtp->usage = (char *)addr;
 		}
-#ifdef	CFG_LONGHELP
+#ifdef	CONFIG_SYS_LONGHELP
 		if (cmdtp->help) {
 			addr = (ulong) (cmdtp->help) + gd->reloc_off;
 			cmdtp->help = (char *)addr;
@@ -313,7 +313,7 @@ void board_init_f(ulong bootflag)
 #endif
 	}
 
-#if defined(CONFIG_CMD_AMBAPP) && defined(CFG_AMBAPP_PRINT_ON_STARTUP)
+#if defined(CONFIG_CMD_AMBAPP) && defined(CONFIG_SYS_AMBAPP_PRINT_ON_STARTUP)
 	puts("AMBA:\n");
 	do_ambapp_print(NULL, 0, 0, NULL);
 #endif
@@ -331,11 +331,11 @@ void board_init_f(ulong bootflag)
 	 */
 	interrupt_init();
 
-#if !defined(CFG_NO_FLASH)
+#if !defined(CONFIG_SYS_NO_FLASH)
 	puts("FLASH: ");
 
 	if ((flash_size = flash_init()) > 0) {
-# ifdef CFG_FLASH_CHECKSUM
+# ifdef CONFIG_SYS_FLASH_CHECKSUM
 		print_size(flash_size, "");
 		/*
 		 * Compute and print flash CRC if flashchecksum is set to 'y'
@@ -345,31 +345,31 @@ void board_init_f(ulong bootflag)
 		s = getenv("flashchecksum");
 		if (s && (*s == 'y')) {
 			printf("  CRC: %08lX",
-			       crc32(0, (const unsigned char *)CFG_FLASH_BASE,
+			       crc32(0, (const unsigned char *)CONFIG_SYS_FLASH_BASE,
 				     flash_size)
 			    );
 		}
 		putc('\n');
-# else				/* !CFG_FLASH_CHECKSUM */
+# else				/* !CONFIG_SYS_FLASH_CHECKSUM */
 		print_size(flash_size, "\n");
-# endif				/* CFG_FLASH_CHECKSUM */
+# endif				/* CONFIG_SYS_FLASH_CHECKSUM */
 	} else {
 		puts(failed);
 		hang();
 	}
 
-	bd->bi_flashstart = CFG_FLASH_BASE;	/* update start of FLASH memory    */
+	bd->bi_flashstart = CONFIG_SYS_FLASH_BASE;	/* update start of FLASH memory    */
 	bd->bi_flashsize = flash_size;	/* size of FLASH memory (final value) */
-#if CFG_MONITOR_BASE == CFG_FLASH_BASE
+#if CONFIG_SYS_MONITOR_BASE == CONFIG_SYS_FLASH_BASE
 	bd->bi_flashoffset = monitor_flash_len;	/* reserved area for startup monitor  */
 #else
 	bd->bi_flashoffset = 0;
 #endif
-#else				/* CFG_NO_FLASH */
+#else				/* CONFIG_SYS_NO_FLASH */
 	bd->bi_flashsize = 0;
 	bd->bi_flashstart = 0;
 	bd->bi_flashoffset = 0;
-#endif				/* !CFG_NO_FLASH */
+#endif				/* !CONFIG_SYS_NO_FLASH */
 
 	/* initialize malloc() area */
 	mem_malloc_init();
@@ -377,7 +377,7 @@ void board_init_f(ulong bootflag)
 	malloc_bin_reloc();
 
 #ifdef CONFIG_SPI
-# if !defined(CFG_ENV_IS_IN_EEPROM)
+# if !defined(CONFIG_ENV_IS_IN_EEPROM)
 	spi_init_f();
 # endif
 	spi_init_r();
@@ -409,7 +409,7 @@ void board_init_f(ulong bootflag)
 	}
 #endif
 
-#ifdef CFG_ID_EEPROM
+#ifdef CONFIG_ID_EEPROM
 	mac_read_from_eeprom();
 #endif
 
diff --git a/lib_sparc/bootm.c b/lib_sparc/bootm.c
index 4e8c92048..c62cf57d8 100644
--- a/lib_sparc/bootm.c
+++ b/lib_sparc/bootm.c
@@ -27,6 +27,7 @@
 #include <asm/byteorder.h>
 #include <asm/prom.h>
 #include <asm/cache.h>
+#include <image.h>
 
 #define PRINT_KERNEL_HEADER
 
@@ -81,6 +82,15 @@ struct __attribute__ ((packed)) {
 /* temporary initrd image holder */
 image_header_t ihdr;
 
+void arch_lmb_reserve(struct lmb *lmb)
+{
+	/* Reserve the space used by PROM and stack. This is done
+	 * to avoid that the RAM image is copied over stack or
+	 * PROM.
+	 */
+	lmb_reserve(lmb, CONFIG_SYS_RELOC_MONITOR_BASE, CONFIG_SYS_RAM_END);
+}
+
 /* boot the linux kernel */
 int do_bootm_linux(int flag, int argc, char *argv[], bootm_headers_t * images)
 {
@@ -93,6 +103,9 @@ int do_bootm_linux(int flag, int argc, char *argv[], bootm_headers_t * images)
 	struct lmb *lmb = &images->lmb;
 	int ret;
 
+	if ((flag != 0) && (flag != BOOTM_STATE_OS_GO))
+		return 1;
+
 	/* Get virtual address of kernel start */
 	linux_hdr = (void *)images->os.load;
 
@@ -124,13 +137,6 @@ int do_bootm_linux(int flag, int argc, char *argv[], bootm_headers_t * images)
 	rd_len = images->rd_end - images->rd_start;
 
 	if (rd_len) {
-
-		/* Reserve the space used by PROM and stack. This is done
-		 * to avoid that the RAM image is copied over stack or
-		 * PROM.
-		 */
-		lmb_reserve(lmb, CFG_RELOC_MONITOR_BASE, CFG_RAM_END);
-
 		ret = boot_ramdisk_high(lmb, images->rd_start, rd_len,
 					&initrd_start, &initrd_end);
 		if (ret) {
@@ -144,7 +150,7 @@ int do_bootm_linux(int flag, int argc, char *argv[], bootm_headers_t * images)
 		 * Set INITRD Image address relative to RAM Start
 		 */
 		linux_hdr->hdr_input.ver_0203.sparc_ramdisk_image =
-		    initrd_start - CFG_RAM_BASE;
+		    initrd_start - CONFIG_SYS_RAM_BASE;
 		linux_hdr->hdr_input.ver_0203.sparc_ramdisk_size = rd_len;
 		/* Clear READ ONLY flag if set to non-zero */
 		linux_hdr->hdr_input.ver_0203.root_flags = 1;
@@ -173,7 +179,7 @@ int do_bootm_linux(int flag, int argc, char *argv[], bootm_headers_t * images)
 	 * From now on the only code in u-boot that will be
 	 * executed is the PROM code.
 	 */
-	kernel(kernel_arg_promvec, (void *)ep);
+	kernel(kernel_arg_promvec, (void *)images->ep);
 
 	/* It will never come to this... */
 	while (1) ;
diff --git a/libfdt/Makefile b/libfdt/Makefile
index ca2ad76c8..d6e283045 100644
--- a/libfdt/Makefile
+++ b/libfdt/Makefile
@@ -27,9 +27,13 @@ LIB	= $(obj)libfdt.a
 
 SOBJS	=
 
-COBJS-$(CONFIG_OF_LIBFDT) += fdt.o fdt_ro.o fdt_rw.o fdt_strerror.o fdt_sw.o fdt_wip.o
+COBJS-libfdt += fdt.o fdt_ro.o fdt_rw.o fdt_strerror.o fdt_sw.o fdt_wip.o
 
-COBJS	:= $(COBJS-y)
+COBJS-$(CONFIG_OF_LIBFDT) += $(COBJS-libfdt)
+COBJS-$(CONFIG_FIT) += $(COBJS-libfdt)
+
+
+COBJS	:= $(sort $(COBJS-y))
 SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
 OBJS	:= $(addprefix $(obj),$(SOBJS) $(COBJS))
 
diff --git a/libfdt/fdt.c b/libfdt/fdt.c
index 732103b07..a59a518b0 100644
--- a/libfdt/fdt.c
+++ b/libfdt/fdt.c
@@ -78,7 +78,7 @@ int fdt_check_header(const void *fdt)
 	return 0;
 }
 
-const void *fdt_offset_ptr(const void *fdt, int offset, int len)
+const void *fdt_offset_ptr(const void *fdt, int offset, unsigned int len)
 {
 	const char *p;
 
diff --git a/libfdt/fdt_ro.c b/libfdt/fdt_ro.c
index b09a6e9eb..fdc9c29d2 100644
--- a/libfdt/fdt_ro.c
+++ b/libfdt/fdt_ro.c
@@ -112,12 +112,12 @@ int fdt_num_mem_rsv(const void *fdt)
 int fdt_subnode_offset_namelen(const void *fdt, int offset,
 			       const char *name, int namelen)
 {
-	int depth;
+	int depth = 0;
 
 	FDT_CHECK_HEADER(fdt);
 
-	for (depth = 0;
-	     offset >= 0;
+	for (depth = 0, offset = fdt_next_node(fdt, offset, &depth);
+	     (offset >= 0) && (depth > 0);
 	     offset = fdt_next_node(fdt, offset, &depth)) {
 		if (depth < 0)
 			return -FDT_ERR_NOTFOUND;
@@ -126,7 +126,10 @@ int fdt_subnode_offset_namelen(const void *fdt, int offset,
 			return offset;
 	}
 
-	return offset; /* error */
+	if (offset < 0)
+		return offset; /* error */
+	else
+		return -FDT_ERR_NOTFOUND;
 }
 
 int fdt_subnode_offset(const void *fdt, int parentoffset,
@@ -145,17 +148,12 @@ int fdt_path_offset(const void *fdt, const char *path)
 
 	/* see if we have an alias */
 	if (*path != '/') {
-		const char *q;
-		int aliasoffset = fdt_path_offset(fdt, "/aliases");
+		const char *q = strchr(path, '/');
 
-		if (aliasoffset < 0)
-			return -FDT_ERR_BADPATH;
-
-		q = strchr(path, '/');
 		if (!q)
 			q = end;
 
-		p = fdt_getprop_namelen(fdt, aliasoffset, path, q - p, NULL);
+		p = fdt_get_alias_namelen(fdt, p, q - p);
 		if (!p)
 			return -FDT_ERR_BADPATH;
 		offset = fdt_path_offset(fdt, p);
@@ -306,6 +304,23 @@ uint32_t fdt_get_phandle(const void *fdt, int nodeoffset)
 	return fdt32_to_cpu(*php);
 }
 
+const char *fdt_get_alias_namelen(const void *fdt,
+				  const char *name, int namelen)
+{
+	int aliasoffset;
+
+	aliasoffset = fdt_path_offset(fdt, "/aliases");
+	if (aliasoffset < 0)
+		return NULL;
+
+	return fdt_getprop_namelen(fdt, aliasoffset, name, namelen, NULL);
+}
+
+const char *fdt_get_alias(const void *fdt, const char *name)
+{
+	return fdt_get_alias_namelen(fdt, name, strlen(name));
+}
+
 int fdt_get_path(const void *fdt, int nodeoffset, char *buf, int buflen)
 {
 	int pdepth = 0, p = 0;
@@ -320,9 +335,6 @@ int fdt_get_path(const void *fdt, int nodeoffset, char *buf, int buflen)
 	for (offset = 0, depth = 0;
 	     (offset >= 0) && (offset <= nodeoffset);
 	     offset = fdt_next_node(fdt, offset, &depth)) {
-		if (pdepth < depth)
-			continue; /* overflowed buffer */
-
 		while (pdepth > depth) {
 			do {
 				p--;
@@ -330,14 +342,16 @@ int fdt_get_path(const void *fdt, int nodeoffset, char *buf, int buflen)
 			pdepth--;
 		}
 
-		name = fdt_get_name(fdt, offset, &namelen);
-		if (!name)
-			return namelen;
-		if ((p + namelen + 1) <= buflen) {
-			memcpy(buf + p, name, namelen);
-			p += namelen;
-			buf[p++] = '/';
-			pdepth++;
+		if (pdepth >= depth) {
+			name = fdt_get_name(fdt, offset, &namelen);
+			if (!name)
+				return namelen;
+			if ((p + namelen + 1) <= buflen) {
+				memcpy(buf + p, name, namelen);
+				p += namelen;
+				buf[p++] = '/';
+				pdepth++;
+			}
 		}
 
 		if (offset == nodeoffset) {
@@ -347,7 +361,7 @@ int fdt_get_path(const void *fdt, int nodeoffset, char *buf, int buflen)
 			if (p > 1) /* special case so that root path is "/", not "" */
 				p--;
 			buf[p] = '\0';
-			return p;
+			return 0;
 		}
 	}
 
diff --git a/nand_spl/board/amcc/acadia/config.mk b/nand_spl/board/amcc/acadia/config.mk
index 3b140fa7e..fcc838ac8 100644
--- a/nand_spl/board/amcc/acadia/config.mk
+++ b/nand_spl/board/amcc/acadia/config.mk
@@ -43,5 +43,5 @@ PLATFORM_CPPFLAGS += -DDEBUG
 endif
 
 ifeq ($(dbcr),1)
-PLATFORM_CPPFLAGS += -DCFG_INIT_DBCR=0x8cff0000
+PLATFORM_CPPFLAGS += -DCONFIG_SYS_INIT_DBCR=0x8cff0000
 endif
diff --git a/nand_spl/board/amcc/acadia/u-boot.lds b/nand_spl/board/amcc/acadia/u-boot.lds
index 7df55e7a9..ab4270140 100644
--- a/nand_spl/board/amcc/acadia/u-boot.lds
+++ b/nand_spl/board/amcc/acadia/u-boot.lds
@@ -57,6 +57,7 @@ SECTIONS
   {
    *(.sbss)
    *(.bss)
+   . = ALIGN(4);
   }
 
   _end = . ;
diff --git a/nand_spl/board/amcc/bamboo/config.mk b/nand_spl/board/amcc/bamboo/config.mk
index f7ec7514f..6377b52b3 100644
--- a/nand_spl/board/amcc/bamboo/config.mk
+++ b/nand_spl/board/amcc/bamboo/config.mk
@@ -45,5 +45,5 @@ PLATFORM_CPPFLAGS += -DDEBUG
 endif
 
 ifeq ($(dbcr),1)
-PLATFORM_CPPFLAGS += -DCFG_INIT_DBCR=0x8cff0000
+PLATFORM_CPPFLAGS += -DCONFIG_SYS_INIT_DBCR=0x8cff0000
 endif
diff --git a/nand_spl/board/amcc/bamboo/sdram.c b/nand_spl/board/amcc/bamboo/sdram.c
index adede44c3..54be2566c 100644
--- a/nand_spl/board/amcc/bamboo/sdram.c
+++ b/nand_spl/board/amcc/bamboo/sdram.c
@@ -88,5 +88,5 @@ phys_size_t initdram(int board_type)
 	mtsdram(mem_cfg0, 0x80000000); /* DCEN=1, PMUD=0*/
 	wait_init_complete();
 
-	return CFG_MBYTES_SDRAM << 20;
+	return CONFIG_SYS_MBYTES_SDRAM << 20;
 }
diff --git a/nand_spl/board/amcc/bamboo/u-boot.lds b/nand_spl/board/amcc/bamboo/u-boot.lds
index 9dfca69a4..b13168ffa 100644
--- a/nand_spl/board/amcc/bamboo/u-boot.lds
+++ b/nand_spl/board/amcc/bamboo/u-boot.lds
@@ -59,6 +59,7 @@ SECTIONS
   {
    *(.sbss)
    *(.bss)
+   . = ALIGN(4);
   }
 
   _end = . ;
diff --git a/nand_spl/board/amcc/canyonlands/config.mk b/nand_spl/board/amcc/canyonlands/config.mk
index c8d7c2352..688c92bf5 100644
--- a/nand_spl/board/amcc/canyonlands/config.mk
+++ b/nand_spl/board/amcc/canyonlands/config.mk
@@ -45,5 +45,5 @@ PLATFORM_CPPFLAGS += -DDEBUG
 endif
 
 ifeq ($(dbcr),1)
-PLATFORM_CPPFLAGS += -DCFG_INIT_DBCR=0x8cff0000
+PLATFORM_CPPFLAGS += -DCONFIG_SYS_INIT_DBCR=0x8cff0000
 endif
diff --git a/nand_spl/board/amcc/canyonlands/ddr2_fixed.c b/nand_spl/board/amcc/canyonlands/ddr2_fixed.c
index 29d7d3f81..371bbb394 100644
--- a/nand_spl/board/amcc/canyonlands/ddr2_fixed.c
+++ b/nand_spl/board/amcc/canyonlands/ddr2_fixed.c
@@ -94,5 +94,5 @@ phys_size_t initdram(int board_type)
 	mtsdram(SDRAM_RQDC, 0x80000038);
 	mtsdram(SDRAM_RFDC, 0x00000257);
 
-	return CFG_MBYTES_SDRAM << 20;
+	return CONFIG_SYS_MBYTES_SDRAM << 20;
 }
diff --git a/nand_spl/board/amcc/canyonlands/u-boot.lds b/nand_spl/board/amcc/canyonlands/u-boot.lds
index 5bffb5b30..ef6d5600d 100644
--- a/nand_spl/board/amcc/canyonlands/u-boot.lds
+++ b/nand_spl/board/amcc/canyonlands/u-boot.lds
@@ -59,6 +59,7 @@ SECTIONS
   {
    *(.sbss)
    *(.bss)
+   . = ALIGN(4);
   }
 
   _end = . ;
diff --git a/nand_spl/board/amcc/kilauea/config.mk b/nand_spl/board/amcc/kilauea/config.mk
index d89ed3f04..f6bcd21a5 100644
--- a/nand_spl/board/amcc/kilauea/config.mk
+++ b/nand_spl/board/amcc/kilauea/config.mk
@@ -44,5 +44,5 @@ PLATFORM_CPPFLAGS += -DDEBUG
 endif
 
 ifeq ($(dbcr),1)
-PLATFORM_CPPFLAGS += -DCFG_INIT_DBCR=0x8cff0000
+PLATFORM_CPPFLAGS += -DCONFIG_SYS_INIT_DBCR=0x8cff0000
 endif
diff --git a/nand_spl/board/amcc/kilauea/u-boot.lds b/nand_spl/board/amcc/kilauea/u-boot.lds
index 03e0b798f..1335532c9 100644
--- a/nand_spl/board/amcc/kilauea/u-boot.lds
+++ b/nand_spl/board/amcc/kilauea/u-boot.lds
@@ -57,6 +57,7 @@ SECTIONS
   {
    *(.sbss)
    *(.bss)
+   . = ALIGN(4);
   }
 
   _end = . ;
diff --git a/nand_spl/board/amcc/sequoia/config.mk b/nand_spl/board/amcc/sequoia/config.mk
index a29ba5fd0..e8c633382 100644
--- a/nand_spl/board/amcc/sequoia/config.mk
+++ b/nand_spl/board/amcc/sequoia/config.mk
@@ -45,5 +45,5 @@ PLATFORM_CPPFLAGS += -DDEBUG
 endif
 
 ifeq ($(dbcr),1)
-PLATFORM_CPPFLAGS += -DCFG_INIT_DBCR=0x8cff0000
+PLATFORM_CPPFLAGS += -DCONFIG_SYS_INIT_DBCR=0x8cff0000
 endif
diff --git a/nand_spl/board/amcc/sequoia/u-boot.lds b/nand_spl/board/amcc/sequoia/u-boot.lds
index 0645ee7a6..d38d09775 100644
--- a/nand_spl/board/amcc/sequoia/u-boot.lds
+++ b/nand_spl/board/amcc/sequoia/u-boot.lds
@@ -59,6 +59,7 @@ SECTIONS
   {
    *(.sbss)
    *(.bss)
+   . = ALIGN(4);
   }
 
   _end = . ;
diff --git a/nand_spl/board/samsung/smdk6400/u-boot.lds b/nand_spl/board/samsung/smdk6400/u-boot.lds
index 1bf022c03..eb8910c12 100644
--- a/nand_spl/board/samsung/smdk6400/u-boot.lds
+++ b/nand_spl/board/samsung/smdk6400/u-boot.lds
@@ -56,6 +56,6 @@ SECTIONS
 
 	. = ALIGN(4);
 	__bss_start = .;
-	.bss : { *(.bss) }
+	.bss : { *(.bss) . = ALIGN(4); }
 	_end = .;
 }
diff --git a/nand_spl/nand_boot.c b/nand_spl/nand_boot.c
index 0c06e5363..87c50e123 100644
--- a/nand_spl/nand_boot.c
+++ b/nand_spl/nand_boot.c
@@ -22,27 +22,27 @@
 #include <nand.h>
 #include <asm/io.h>
 
-#define CFG_NAND_READ_DELAY \
+#define CONFIG_SYS_NAND_READ_DELAY \
 	{ volatile int dummy; int i; for (i=0; i<10000; i++) dummy = i; }
 
-static int nand_ecc_pos[] = CFG_NAND_ECCPOS;
+static int nand_ecc_pos[] = CONFIG_SYS_NAND_ECCPOS;
 
 extern void board_nand_init(struct nand_chip *nand);
 
-#if (CFG_NAND_PAGE_SIZE <= 512)
+#if (CONFIG_SYS_NAND_PAGE_SIZE <= 512)
 /*
  * NAND command for small page NAND devices (512)
  */
 static int nand_command(struct mtd_info *mtd, int block, int page, int offs, u8 cmd)
 {
 	struct nand_chip *this = mtd->priv;
-	int page_addr = page + block * CFG_NAND_PAGE_COUNT;
+	int page_addr = page + block * CONFIG_SYS_NAND_PAGE_COUNT;
 
 	if (this->dev_ready)
 		while (!this->dev_ready(mtd))
 			;
 	else
-		CFG_NAND_READ_DELAY;
+		CONFIG_SYS_NAND_READ_DELAY;
 
 	/* Begin command latch cycle */
 	this->cmd_ctrl(mtd, cmd, NAND_CTRL_CLE | NAND_CTRL_CHANGE);
@@ -51,7 +51,7 @@ static int nand_command(struct mtd_info *mtd, int block, int page, int offs, u8
 	this->cmd_ctrl(mtd, offs, NAND_CTRL_ALE | NAND_CTRL_CHANGE);
 	this->cmd_ctrl(mtd, page_addr & 0xff, 0); /* A[16:9] */
 	this->cmd_ctrl(mtd, (page_addr >> 8) & 0xff, 0); /* A[24:17] */
-#ifdef CFG_NAND_4_ADDR_CYCLE
+#ifdef CONFIG_SYS_NAND_4_ADDR_CYCLE
 	/* One more address cycle for devices > 32MiB */
 	this->cmd_ctrl(mtd, (page_addr >> 16) & 0x0f, 0); /* A[28:25] */
 #endif
@@ -65,7 +65,7 @@ static int nand_command(struct mtd_info *mtd, int block, int page, int offs, u8
 		while (!this->dev_ready(mtd))
 			;
 	else
-		CFG_NAND_READ_DELAY;
+		CONFIG_SYS_NAND_READ_DELAY;
 
 	return 0;
 }
@@ -76,17 +76,17 @@ static int nand_command(struct mtd_info *mtd, int block, int page, int offs, u8
 static int nand_command(struct mtd_info *mtd, int block, int page, int offs, u8 cmd)
 {
 	struct nand_chip *this = mtd->priv;
-	int page_addr = page + block * CFG_NAND_PAGE_COUNT;
+	int page_addr = page + block * CONFIG_SYS_NAND_PAGE_COUNT;
 
 	if (this->dev_ready)
 		while (!this->dev_ready(mtd))
 			;
 	else
-		CFG_NAND_READ_DELAY;
+		CONFIG_SYS_NAND_READ_DELAY;
 
 	/* Emulate NAND_CMD_READOOB */
 	if (cmd == NAND_CMD_READOOB) {
-		offs += CFG_NAND_PAGE_SIZE;
+		offs += CONFIG_SYS_NAND_PAGE_SIZE;
 		cmd = NAND_CMD_READ0;
 	}
 
@@ -100,7 +100,7 @@ static int nand_command(struct mtd_info *mtd, int block, int page, int offs, u8
 	/* Row address */
 	this->cmd_ctrl(mtd, (page_addr & 0xff), 0); /* A[19:12] */
 	this->cmd_ctrl(mtd, ((page_addr >> 8) & 0xff), 0); /* A[27:20] */
-#ifdef CFG_NAND_5_ADDR_CYCLE
+#ifdef CONFIG_SYS_NAND_5_ADDR_CYCLE
 	/* One more address cycle for devices > 128MiB */
 	this->cmd_ctrl(mtd, (page_addr >> 16) & 0x0f, 0); /* A[31:28] */
 #endif
@@ -116,7 +116,7 @@ static int nand_command(struct mtd_info *mtd, int block, int page, int offs, u8
 		while (!this->dev_ready(mtd))
 			;
 	else
-		CFG_NAND_READ_DELAY;
+		CONFIG_SYS_NAND_READ_DELAY;
 
 	return 0;
 }
@@ -126,7 +126,7 @@ static int nand_is_bad_block(struct mtd_info *mtd, int block)
 {
 	struct nand_chip *this = mtd->priv;
 
-	nand_command(mtd, block, 0, CFG_NAND_BAD_BLOCK_POS, NAND_CMD_READOOB);
+	nand_command(mtd, block, 0, CONFIG_SYS_NAND_BAD_BLOCK_POS, NAND_CMD_READOOB);
 
 	/*
 	 * Read one byte
@@ -144,9 +144,9 @@ static int nand_read_page(struct mtd_info *mtd, int block, int page, uchar *dst)
 	u_char *ecc_code;
 	u_char *oob_data;
 	int i;
-	int eccsize = CFG_NAND_ECCSIZE;
-	int eccbytes = CFG_NAND_ECCBYTES;
-	int eccsteps = CFG_NAND_ECCSTEPS;
+	int eccsize = CONFIG_SYS_NAND_ECCSIZE;
+	int eccbytes = CONFIG_SYS_NAND_ECCBYTES;
+	int eccsteps = CONFIG_SYS_NAND_ECCSTEPS;
 	uint8_t *p = dst;
 	int stat;
 
@@ -155,7 +155,7 @@ static int nand_read_page(struct mtd_info *mtd, int block, int page, uchar *dst)
 	/* No malloc available for now, just use some temporary locations
 	 * in SDRAM
 	 */
-	ecc_calc = (u_char *)(CFG_SDRAM_BASE + 0x10000);
+	ecc_calc = (u_char *)(CONFIG_SYS_SDRAM_BASE + 0x10000);
 	ecc_code = ecc_calc + 0x100;
 	oob_data = ecc_calc + 0x200;
 
@@ -164,13 +164,13 @@ static int nand_read_page(struct mtd_info *mtd, int block, int page, uchar *dst)
 		this->read_buf(mtd, p, eccsize);
 		this->ecc.calculate(mtd, p, &ecc_calc[i]);
 	}
-	this->read_buf(mtd, oob_data, CFG_NAND_OOBSIZE);
+	this->read_buf(mtd, oob_data, CONFIG_SYS_NAND_OOBSIZE);
 
 	/* Pick the ECC bytes out of the oob data */
-	for (i = 0; i < CFG_NAND_ECCTOTAL; i++)
+	for (i = 0; i < CONFIG_SYS_NAND_ECCTOTAL; i++)
 		ecc_code[i] = oob_data[nand_ecc_pos[i]];
 
-	eccsteps = CFG_NAND_ECCSTEPS;
+	eccsteps = CONFIG_SYS_NAND_ECCSTEPS;
 	p = dst;
 
 	for (i = 0 ; eccsteps; eccsteps--, i += eccbytes, p += eccsize) {
@@ -193,18 +193,18 @@ static int nand_load(struct mtd_info *mtd, unsigned int offs,
 	/*
 	 * offs has to be aligned to a page address!
 	 */
-	block = offs / CFG_NAND_BLOCK_SIZE;
-	lastblock = (offs + uboot_size - 1) / CFG_NAND_BLOCK_SIZE;
-	page = (offs % CFG_NAND_BLOCK_SIZE) / CFG_NAND_PAGE_SIZE;
+	block = offs / CONFIG_SYS_NAND_BLOCK_SIZE;
+	lastblock = (offs + uboot_size - 1) / CONFIG_SYS_NAND_BLOCK_SIZE;
+	page = (offs % CONFIG_SYS_NAND_BLOCK_SIZE) / CONFIG_SYS_NAND_PAGE_SIZE;
 
 	while (block <= lastblock) {
 		if (!nand_is_bad_block(mtd, block)) {
 			/*
 			 * Skip bad blocks
 			 */
-			while (page < CFG_NAND_PAGE_COUNT) {
+			while (page < CONFIG_SYS_NAND_PAGE_COUNT) {
 				nand_read_page(mtd, block, page, dst);
-				dst += CFG_NAND_PAGE_SIZE;
+				dst += CONFIG_SYS_NAND_PAGE_SIZE;
 				page++;
 			}
 
@@ -235,7 +235,7 @@ void nand_boot(void)
 	 * Init board specific nand support
 	 */
 	nand_info.priv = &nand_chip;
-	nand_chip.IO_ADDR_R = nand_chip.IO_ADDR_W = (void  __iomem *)CFG_NAND_BASE;
+	nand_chip.IO_ADDR_R = nand_chip.IO_ADDR_W = (void  __iomem *)CONFIG_SYS_NAND_BASE;
 	nand_chip.dev_ready = NULL;	/* preset to NULL */
 	board_nand_init(&nand_chip);
 
@@ -245,8 +245,8 @@ void nand_boot(void)
 	/*
 	 * Load U-Boot image from NAND into RAM
 	 */
-	ret = nand_load(&nand_info, CFG_NAND_U_BOOT_OFFS, CFG_NAND_U_BOOT_SIZE,
-			(uchar *)CFG_NAND_U_BOOT_DST);
+	ret = nand_load(&nand_info, CONFIG_SYS_NAND_U_BOOT_OFFS, CONFIG_SYS_NAND_U_BOOT_SIZE,
+			(uchar *)CONFIG_SYS_NAND_U_BOOT_DST);
 
 	if (nand_chip.select_chip)
 		nand_chip.select_chip(&nand_info, -1);
@@ -254,6 +254,6 @@ void nand_boot(void)
 	/*
 	 * Jump to U-Boot image
 	 */
-	uboot = (void *)CFG_NAND_U_BOOT_START;
+	uboot = (void *)CONFIG_SYS_NAND_U_BOOT_START;
 	(*uboot)();
 }
diff --git a/nand_spl/nand_boot_fsl_elbc.c b/nand_spl/nand_boot_fsl_elbc.c
index 53392243d..4a961ea7b 100644
--- a/nand_spl/nand_boot_fsl_elbc.c
+++ b/nand_spl/nand_boot_fsl_elbc.c
@@ -33,7 +33,7 @@
 
 static void nand_wait(void)
 {
-	lbus83xx_t *regs = (lbus83xx_t *)(CFG_IMMR + 0x5000);
+	fsl_lbus_t *regs = (fsl_lbus_t *)(CONFIG_SYS_IMMR + 0x5000);
 
 	for (;;) {
 		uint32_t status = in_be32(&regs->ltesr);
@@ -50,8 +50,8 @@ static void nand_wait(void)
 
 static void nand_load(unsigned int offs, int uboot_size, uchar *dst)
 {
-	lbus83xx_t *regs = (lbus83xx_t *)(CFG_IMMR + 0x5000);
-	uchar *buf = (uchar *)CFG_NAND_BASE;
+	fsl_lbus_t *regs = (fsl_lbus_t *)(CONFIG_SYS_IMMR + 0x5000);
+	uchar *buf = (uchar *)CONFIG_SYS_NAND_BASE;
 	int large = in_be32(&regs->bank[0].or) & OR_FCM_PGS;
 	int block_shift = large ? 17 : 14;
 	int block_size = 1 << block_shift;
@@ -136,13 +136,13 @@ void nand_boot(void)
 	/*
 	 * Load U-Boot image from NAND into RAM
 	 */
-	nand_load(CFG_NAND_U_BOOT_OFFS, CFG_NAND_U_BOOT_SIZE,
-	          (uchar *)CFG_NAND_U_BOOT_DST);
+	nand_load(CONFIG_SYS_NAND_U_BOOT_OFFS, CONFIG_SYS_NAND_U_BOOT_SIZE,
+	          (uchar *)CONFIG_SYS_NAND_U_BOOT_DST);
 
 	/*
 	 * Jump to U-Boot image
 	 */
 	puts("transfering control\n");
-	uboot = (void *)CFG_NAND_U_BOOT_START;
+	uboot = (void *)CONFIG_SYS_NAND_U_BOOT_START;
 	uboot();
 }
diff --git a/net/bootp.c b/net/bootp.c
index 64552ac2a..83465e41a 100644
--- a/net/bootp.c
+++ b/net/bootp.c
@@ -33,7 +33,7 @@
 
 #if defined(CONFIG_CMD_NET)
 
-#define TIMEOUT		5UL		/* Seconds before trying BOOTP again	*/
+#define TIMEOUT		5000UL	/* Milliseconds before trying BOOTP again */
 #ifndef CONFIG_NET_RETRY_COUNT
 # define TIMEOUT_COUNT	5		/* # of timeouts before giving up  */
 #else
@@ -371,7 +371,7 @@ BootpTimeout(void)
 		puts ("\nRetry count exceeded; starting again\n");
 		NetStartAgain ();
 	} else {
-		NetSetTimeout (TIMEOUT * CFG_HZ, BootpTimeout);
+		NetSetTimeout (TIMEOUT, BootpTimeout);
 		BootpRequest ();
 	}
 }
@@ -671,7 +671,7 @@ BootpRequest (void)
 	bp->bp_htype = HWT_ETHER;
 	bp->bp_hlen = HWL_ETHER;
 	bp->bp_hops = 0;
-	bp->bp_secs = htons(get_timer(0) / CFG_HZ);
+	bp->bp_secs = htons(get_timer(0) / 1000);
 	NetWriteIP(&bp->bp_ciaddr, 0);
 	NetWriteIP(&bp->bp_yiaddr, 0);
 	NetWriteIP(&bp->bp_siaddr, 0);
@@ -688,7 +688,7 @@ BootpRequest (void)
 
 	/*
 	 *	Bootp ID is the lower 4 bytes of our ethernet address
-	 *	plus the current time in HZ.
+	 *	plus the current time in ms.
 	 */
 	BootpID = ((ulong)NetOurEther[2] << 24)
 		| ((ulong)NetOurEther[3] << 16)
@@ -705,7 +705,7 @@ BootpRequest (void)
 	pktlen = BOOTP_SIZE - sizeof(bp->bp_vend) + ext_len;
 	iplen = BOOTP_HDR_SIZE - sizeof(bp->bp_vend) + ext_len;
 	NetSetIP(iphdr, 0xFFFFFFFFL, PORT_BOOTPS, PORT_BOOTPC, iplen);
-	NetSetTimeout(SELECT_TIMEOUT * CFG_HZ, BootpTimeout);
+	NetSetTimeout(SELECT_TIMEOUT, BootpTimeout);
 
 #if defined(CONFIG_CMD_DHCP)
 	dhcp_state = SELECTING;
@@ -849,7 +849,7 @@ static void DhcpSendRequestPkt(Bootp_t *bp_offer)
 	bp->bp_htype = HWT_ETHER;
 	bp->bp_hlen = HWL_ETHER;
 	bp->bp_hops = 0;
-	bp->bp_secs = htons(get_timer(0) / CFG_HZ);
+	bp->bp_secs = htons(get_timer(0) / 1000);
 	/* Do not set the client IP, your IP, or server IP yet, since it hasn't been ACK'ed by
 	 * the server yet */
 
@@ -912,11 +912,11 @@ DhcpHandler(uchar * pkt, unsigned dest, unsigned src, unsigned len)
 		 * OFFER from a server we want.
 		 */
 		debug ("DHCP: state=SELECTING bp_file: \"%s\"\n", bp->bp_file);
-#ifdef CFG_BOOTFILE_PREFIX
+#ifdef CONFIG_SYS_BOOTFILE_PREFIX
 		if (strncmp(bp->bp_file,
-			    CFG_BOOTFILE_PREFIX,
-			    strlen(CFG_BOOTFILE_PREFIX)) == 0 ) {
-#endif	/* CFG_BOOTFILE_PREFIX */
+			    CONFIG_SYS_BOOTFILE_PREFIX,
+			    strlen(CONFIG_SYS_BOOTFILE_PREFIX)) == 0 ) {
+#endif	/* CONFIG_SYS_BOOTFILE_PREFIX */
 
 			debug ("TRANSITIONING TO REQUESTING STATE\n");
 			dhcp_state = REQUESTING;
@@ -924,11 +924,11 @@ DhcpHandler(uchar * pkt, unsigned dest, unsigned src, unsigned len)
 			if (NetReadLong((ulong*)&bp->bp_vend[0]) == htonl(BOOTP_VENDOR_MAGIC))
 				DhcpOptionsProcess((u8 *)&bp->bp_vend[4], bp);
 
-			NetSetTimeout(TIMEOUT * CFG_HZ, BootpTimeout);
+			NetSetTimeout(TIMEOUT, BootpTimeout);
 			DhcpSendRequestPkt(bp);
-#ifdef CFG_BOOTFILE_PREFIX
+#ifdef CONFIG_SYS_BOOTFILE_PREFIX
 		}
-#endif	/* CFG_BOOTFILE_PREFIX */
+#endif	/* CONFIG_SYS_BOOTFILE_PREFIX */
 
 		return;
 		break;
diff --git a/net/bootp.h b/net/bootp.h
index c2f011c8c..50625abea 100644
--- a/net/bootp.h
+++ b/net/bootp.h
@@ -88,7 +88,7 @@ typedef enum { INIT,
 #define DHCP_NAK      6
 #define DHCP_RELEASE  7
 
-#define SELECT_TIMEOUT 3UL	/* Seconds to wait for offers */
+#define SELECT_TIMEOUT 3000UL	/* Milliseconds to wait for offers */
 
 /**********************************************************************/
 
diff --git a/net/eth.c b/net/eth.c
index 85fa0da23..b7ef09f44 100644
--- a/net/eth.c
+++ b/net/eth.c
@@ -39,34 +39,8 @@ static int __def_eth_init(bd_t *bis)
 int cpu_eth_init(bd_t *bis) __attribute((weak, alias("__def_eth_init")));
 int board_eth_init(bd_t *bis) __attribute((weak, alias("__def_eth_init")));
 
-#ifdef CFG_GT_6426x
-extern int gt6426x_eth_initialize(bd_t *bis);
-#endif
-
-extern int au1x00_enet_initialize(bd_t*);
-extern int dc21x4x_initialize(bd_t*);
-extern int e1000_initialize(bd_t*);
-extern int eepro100_initialize(bd_t*);
-extern int eth_3com_initialize(bd_t*);
-extern int fec_initialize(bd_t*);
-extern int inca_switch_initialize(bd_t*);
-extern int mpc5xxx_fec_initialize(bd_t*);
-extern int mpc512x_fec_initialize(bd_t*);
-extern int mpc8220_fec_initialize(bd_t*);
 extern int mv6436x_eth_initialize(bd_t *);
 extern int mv6446x_eth_initialize(bd_t *);
-extern int natsemi_initialize(bd_t*);
-extern int ns8382x_initialize(bd_t*);
-extern int pcnet_initialize(bd_t*);
-extern int plb2800_eth_initialize(bd_t*);
-extern int ppc_4xx_eth_initialize(bd_t *);
-extern int rtl8139_initialize(bd_t*);
-extern int rtl8169_initialize(bd_t*);
-extern int scc_initialize(bd_t*);
-extern int tsi108_eth_initialize(bd_t*);
-extern int npe_initialize(bd_t *);
-extern int uec_initialize(int);
-extern int at91sam9_eth_initialize(bd_t *);
 
 #ifdef CONFIG_API
 extern void (*push_packet)(volatile void *, int);
@@ -178,87 +152,6 @@ int eth_initialize(bd_t *bis)
 #if defined(CONFIG_DB64460) || defined(CONFIG_P3Mx)
 	mv6446x_eth_initialize(bis);
 #endif
-#if defined(CONFIG_4xx) && !defined(CONFIG_IOP480) && !defined(CONFIG_AP1000)
-	ppc_4xx_eth_initialize(bis);
-#endif
-#ifdef CONFIG_INCA_IP_SWITCH
-	inca_switch_initialize(bis);
-#endif
-#ifdef CONFIG_PLB2800_ETHER
-	plb2800_eth_initialize(bis);
-#endif
-#ifdef SCC_ENET
-	scc_initialize(bis);
-#endif
-#if defined(CONFIG_MPC5xxx_FEC)
-	mpc5xxx_fec_initialize(bis);
-#endif
-#if defined(CONFIG_MPC512x_FEC)
-	mpc512x_fec_initialize (bis);
-#endif
-#if defined(CONFIG_MPC8220_FEC)
-	mpc8220_fec_initialize(bis);
-#endif
-#if defined(CONFIG_UEC_ETH1)
-	uec_initialize(0);
-#endif
-#if defined(CONFIG_UEC_ETH2)
-	uec_initialize(1);
-#endif
-#if defined(CONFIG_UEC_ETH3)
-	uec_initialize(2);
-#endif
-#if defined(CONFIG_UEC_ETH4)
-	uec_initialize(3);
-#endif
-
-#if defined(FEC_ENET) || defined(CONFIG_ETHER_ON_FCC)
-	fec_initialize(bis);
-#endif
-#if defined(CONFIG_AU1X00)
-	au1x00_enet_initialize(bis);
-#endif
-#if defined(CONFIG_IXP4XX_NPE)
-	npe_initialize(bis);
-#endif
-#ifdef CONFIG_E1000
-	e1000_initialize(bis);
-#endif
-#ifdef CONFIG_EEPRO100
-	eepro100_initialize(bis);
-#endif
-#ifdef CONFIG_TULIP
-	dc21x4x_initialize(bis);
-#endif
-#ifdef CONFIG_3COM
-	eth_3com_initialize(bis);
-#endif
-#ifdef CONFIG_PCNET
-	pcnet_initialize(bis);
-#endif
-#ifdef CFG_GT_6426x
-	gt6426x_eth_initialize(bis);
-#endif
-#ifdef CONFIG_NATSEMI
-	natsemi_initialize(bis);
-#endif
-#ifdef CONFIG_NS8382X
-	ns8382x_initialize(bis);
-#endif
-#if defined(CONFIG_TSI108_ETH)
-	tsi108_eth_initialize(bis);
-#endif
-#if defined(CONFIG_RTL8139)
-	rtl8139_initialize(bis);
-#endif
-#if defined(CONFIG_RTL8169)
-	rtl8169_initialize(bis);
-#endif
-#if defined(CONFIG_AT91CAP9) || defined(CONFIG_AT91SAM9260) || \
-    defined(CONFIG_AT91SAM9263)
-	at91sam9_eth_initialize(bis);
-#endif
-
 	if (!eth_devices) {
 		puts ("No ethernet found.\n");
 		show_boot_progress (-64);
@@ -588,8 +481,7 @@ int eth_initialize(bd_t *bis)
 #if defined(CONFIG_AT91RM9200)
 	at91rm9200_miiphy_initialize(bis);
 #endif
-#if defined(CONFIG_4xx) && !defined(CONFIG_IOP480) \
-	&& !defined(CONFIG_AP1000) && !defined(CONFIG_405)
+#if defined(CONFIG_PPC4xx_EMAC)
 	emac4xx_miiphy_initialize(bis);
 #endif
 #if defined(CONFIG_MCF52x2)
diff --git a/net/net.c b/net/net.c
index 313d5d8da..e6547f9ed 100644
--- a/net/net.c
+++ b/net/net.c
@@ -89,20 +89,18 @@
 #if defined(CONFIG_CMD_SNTP)
 #include "sntp.h"
 #endif
+#if defined(CONFIG_CDP_VERSION)
+#include <timestamp.h>
+#endif
 
 #if defined(CONFIG_CMD_NET)
 
 DECLARE_GLOBAL_DATA_PTR;
 
 #ifndef	CONFIG_ARP_TIMEOUT
-# define ARP_TIMEOUT		50UL	/* Deciseconds before trying ARP again */
-#elif (CONFIG_ARP_TIMEOUT < 100)
-# error "Due to possible overflow CONFIG_ARP_TIMEOUT must be greater than 100ms"
+# define ARP_TIMEOUT		5000UL	/* Milliseconds before trying ARP again */
 #else
-# if (CONFIG_ARP_TIMEOUT % 100)
-#  warning "Supported ARP_TIMEOUT precision is 100ms"
-# endif
-# define ARP_TIMEOUT		(CONFIG_ARP_TIMEOUT / 100)
+# define ARP_TIMEOUT		CONFIG_ARP_TIMEOUT
 #endif
 
 
@@ -264,7 +262,7 @@ void ArpTimeoutCheck(void)
 	t = get_timer(0);
 
 	/* check for arp timeout */
-	if ((t - NetArpWaitTimerStart) > ARP_TIMEOUT * CFG_HZ / 10) {
+	if ((t - NetArpWaitTimerStart) > ARP_TIMEOUT) {
 		NetArpWaitTry++;
 
 		if (NetArpWaitTry >= ARP_TIMEOUT_COUNT) {
@@ -477,16 +475,16 @@ restart:
 	}
 
 #if defined(CONFIG_MII) || defined(CONFIG_CMD_MII)
-#if defined(CFG_FAULT_ECHO_LINK_DOWN) && defined(CONFIG_STATUS_LED) && defined(STATUS_LED_RED)
+#if defined(CONFIG_SYS_FAULT_ECHO_LINK_DOWN) && defined(CONFIG_STATUS_LED) && defined(STATUS_LED_RED)
 	/*
 	 * Echo the inverted link state to the fault LED.
 	 */
-	if(miiphy_link(eth_get_dev()->name, CFG_FAULT_MII_ADDR)) {
+	if(miiphy_link(eth_get_dev()->name, CONFIG_SYS_FAULT_MII_ADDR)) {
 		status_led_set (STATUS_LED_RED, STATUS_LED_OFF);
 	} else {
 		status_led_set (STATUS_LED_RED, STATUS_LED_ON);
 	}
-#endif /* CFG_FAULT_ECHO_LINK_DOWN, ... */
+#endif /* CONFIG_SYS_FAULT_ECHO_LINK_DOWN, ... */
 #endif /* CONFIG_MII, ... */
 
 	/*
@@ -526,18 +524,18 @@ restart:
 			thand_f *x;
 
 #if defined(CONFIG_MII) || defined(CONFIG_CMD_MII)
-#  if defined(CFG_FAULT_ECHO_LINK_DOWN) && \
+#  if defined(CONFIG_SYS_FAULT_ECHO_LINK_DOWN) && \
       defined(CONFIG_STATUS_LED) &&	   \
       defined(STATUS_LED_RED)
 			/*
 			 * Echo the inverted link state to the fault LED.
 			 */
-			if(miiphy_link(eth_get_dev()->name, CFG_FAULT_MII_ADDR)) {
+			if(miiphy_link(eth_get_dev()->name, CONFIG_SYS_FAULT_MII_ADDR)) {
 				status_led_set (STATUS_LED_RED, STATUS_LED_OFF);
 			} else {
 				status_led_set (STATUS_LED_RED, STATUS_LED_ON);
 			}
-#  endif /* CFG_FAULT_ECHO_LINK_DOWN, ... */
+#  endif /* CONFIG_SYS_FAULT_ECHO_LINK_DOWN, ... */
 #endif /* CONFIG_MII, ... */
 			x = timeHandler;
 			timeHandler = (thand_f *)0;
@@ -603,7 +601,7 @@ void NetStartAgain (void)
 		return;
 	}
 #ifndef CONFIG_NET_MULTI
-	NetSetTimeout (10UL * CFG_HZ, startAgainTimeout);
+	NetSetTimeout (10000UL, startAgainTimeout);
 	NetSetHandler (startAgainHandler);
 #else	/* !CONFIG_NET_MULTI*/
 	eth_halt ();
@@ -614,7 +612,7 @@ void NetStartAgain (void)
 	if (NetRestartWrap) {
 		NetRestartWrap = 0;
 		if (NetDevExists && !once) {
-			NetSetTimeout (10UL * CFG_HZ, startAgainTimeout);
+			NetSetTimeout (10000UL, startAgainTimeout);
 			NetSetHandler (startAgainHandler);
 		} else {
 			NetState = NETLOOP_FAIL;
@@ -740,7 +738,7 @@ int PingSend(void)
 	ip->ip_tos   = 0;
 	ip->ip_len   = htons(IP_HDR_SIZE_NO_UDP + 8);
 	ip->ip_id    = htons(NetIPID++);
-	ip->ip_off   = htons(0x4000);	/* No fragmentation */
+	ip->ip_off   = htons(IP_FLAGS_DFRAG);	/* Don't fragment */
 	ip->ip_ttl   = 255;
 	ip->ip_p     = 0x01;		/* ICMP */
 	ip->ip_sum   = 0;
@@ -790,7 +788,7 @@ static void PingStart(void)
 #if defined(CONFIG_NET_MULTI)
 	printf ("Using %s device\n", eth_get_name());
 #endif	/* CONFIG_NET_MULTI */
-	NetSetTimeout (10UL * CFG_HZ, PingTimeout);
+	NetSetTimeout (10000UL, PingTimeout);
 	NetSetHandler (PingHandler);
 
 	PingSend();
@@ -813,7 +811,7 @@ static void PingStart(void)
 #define CDP_SYSOBJECT_TLV		0x0015
 #define CDP_MANAGEMENT_ADDRESS_TLV	0x0016
 
-#define CDP_TIMEOUT			(CFG_HZ/4)	/* one packet every 250ms */
+#define CDP_TIMEOUT			250UL	/* one packet every 250ms */
 
 static int CDPSeq;
 static int CDPOK;
@@ -1404,7 +1402,8 @@ NetReceive(volatile uchar * inpkt, int len)
 		if ((ip->ip_hl_v & 0xf0) != 0x40) {
 			return;
 		}
-		if (ip->ip_off & htons(0x1fff)) { /* Can't deal w/ fragments */
+		/* Can't deal with fragments */
+		if (ip->ip_off & htons(IP_OFFS | IP_FLAGS_MFRAG)) {
 			return;
 		}
 		/* can't deal with headers > 20 bytes */
@@ -1703,7 +1702,7 @@ NetSetIP(volatile uchar * xip, IPaddr_t dest, int dport, int sport, int len)
 	ip->ip_tos   = 0;
 	ip->ip_len   = htons(IP_HDR_SIZE + len);
 	ip->ip_id    = htons(NetIPID++);
-	ip->ip_off   = htons(0x4000);	/* No fragmentation */
+	ip->ip_off   = htons(IP_FLAGS_DFRAG);	/* Don't fragment */
 	ip->ip_ttl   = 255;
 	ip->ip_p     = 17;		/* UDP */
 	ip->ip_sum   = 0;
diff --git a/net/nfs.c b/net/nfs.c
index 6573c1716..f2900149d 100644
--- a/net/nfs.c
+++ b/net/nfs.c
@@ -35,7 +35,7 @@
 
 #define HASHES_PER_LINE 65	/* Number of "loading" hashes per line	*/
 #define NFS_RETRY_COUNT 30
-#define NFS_TIMEOUT 2UL
+#define NFS_TIMEOUT 2000UL
 
 static int fs_mounted = 0;
 static unsigned long rpc_id = 0;
@@ -69,10 +69,10 @@ static __inline__ int
 store_block (uchar * src, unsigned offset, unsigned len)
 {
 	ulong newsize = offset + len;
-#ifdef CFG_DIRECT_FLASH_NFS
+#ifdef CONFIG_SYS_DIRECT_FLASH_NFS
 	int i, rc = 0;
 
-	for (i=0; i<CFG_MAX_FLASH_BANKS; i++) {
+	for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; i++) {
 		/* start address in flash? */
 		if (load_addr + offset >= flash_info[i].start[0]) {
 			rc = 1;
@@ -87,7 +87,7 @@ store_block (uchar * src, unsigned offset, unsigned len)
 			return -1;
 		}
 	} else
-#endif /* CFG_DIRECT_FLASH_NFS */
+#endif /* CONFIG_SYS_DIRECT_FLASH_NFS */
 	{
 		(void)memcpy ((void *)(load_addr + offset), src, len);
 	}
@@ -674,7 +674,7 @@ NfsHandler (uchar *pkt, unsigned dest, unsigned src, unsigned len)
 
 	case STATE_READ_REQ:
 		rlen = nfs_read_reply (pkt, len);
-		NetSetTimeout (NFS_TIMEOUT * CFG_HZ, NfsTimeout);
+		NetSetTimeout (NFS_TIMEOUT, NfsTimeout);
 		if (rlen > 0) {
 			nfs_offset += rlen;
 			NfsSend ();
@@ -763,7 +763,7 @@ NfsStart (void)
 	printf ("\nLoad address: 0x%lx\n"
 		"Loading: *\b", load_addr);
 
-	NetSetTimeout (NFS_TIMEOUT * CFG_HZ, NfsTimeout);
+	NetSetTimeout (NFS_TIMEOUT, NfsTimeout);
 	NetSetHandler (NfsHandler);
 
 	NfsTimeoutCount = 0;
diff --git a/net/rarp.c b/net/rarp.c
index ecf38e4ee..710569626 100644
--- a/net/rarp.c
+++ b/net/rarp.c
@@ -31,7 +31,7 @@
 
 #if defined(CONFIG_CMD_NET)
 
-#define TIMEOUT		5UL		/* Seconds before trying BOOTP again */
+#define TIMEOUT		5000UL	/* Milliseconds before trying BOOTP again */
 #ifndef	CONFIG_NET_RETRY_COUNT
 # define TIMEOUT_COUNT	5		/* # of timeouts before giving up  */
 #else
@@ -80,7 +80,7 @@ RarpTimeout(void)
 		puts ("\nRetry count exceeded; starting again\n");
 		NetStartAgain ();
 	} else {
-		NetSetTimeout (TIMEOUT * CFG_HZ, RarpTimeout);
+		NetSetTimeout (TIMEOUT, RarpTimeout);
 		RarpRequest ();
 	}
 }
@@ -115,7 +115,7 @@ RarpRequest (void)
 
 	NetSendPacket(NetTxPacket, (pkt - NetTxPacket) + ARP_HDR_SIZE);
 
-	NetSetTimeout(TIMEOUT * CFG_HZ, RarpTimeout);
+	NetSetTimeout(TIMEOUT, RarpTimeout);
 	NetSetHandler(RarpHandler);
 }
 
diff --git a/net/sntp.c b/net/sntp.c
index 95e75422c..425d35edd 100644
--- a/net/sntp.c
+++ b/net/sntp.c
@@ -14,7 +14,7 @@
 
 #if defined(CONFIG_CMD_NET) && defined(CONFIG_CMD_SNTP)
 
-#define SNTP_TIMEOUT 10
+#define SNTP_TIMEOUT 10000UL
 
 static int SntpOurPort;
 
@@ -82,7 +82,7 @@ SntpStart (void)
 {
 	debug ("%s\n", __FUNCTION__);
 
-	NetSetTimeout (SNTP_TIMEOUT * CFG_HZ, SntpTimeout);
+	NetSetTimeout (SNTP_TIMEOUT, SntpTimeout);
 	NetSetHandler(SntpHandler);
 	memset (NetServerEther, 0, 6);
 
diff --git a/net/tftp.c b/net/tftp.c
index 84d83ca97..3dac3d853 100644
--- a/net/tftp.c
+++ b/net/tftp.c
@@ -15,7 +15,7 @@
 #if defined(CONFIG_CMD_NET)
 
 #define WELL_KNOWN_PORT	69		/* Well known TFTP port #		*/
-#define TIMEOUT		5UL		/* Seconds to timeout for a lost pkt	*/
+#define TIMEOUT		5000UL		/* Millisecs to timeout for lost pkt */
 #ifndef	CONFIG_NET_RETRY_COUNT
 # define TIMEOUT_COUNT	10		/* # of timeouts before giving up  */
 #else
@@ -34,6 +34,21 @@
 #define TFTP_ERROR	5
 #define TFTP_OACK	6
 
+static ulong TftpTimeoutMSecs = TIMEOUT;
+static int TftpTimeoutCountMax = TIMEOUT_COUNT;
+
+/*
+ * These globals govern the timeout behavior when attempting a connection to a
+ * TFTP server. TftpRRQTimeoutMSecs specifies the number of milliseconds to
+ * wait for the server to respond to initial connection. Second global,
+ * TftpRRQTimeoutCountMax, gives the number of such connection retries.
+ * TftpRRQTimeoutCountMax must be non-negative and TftpRRQTimeoutMSecs must be
+ * positive. The globals are meant to be set (and restored) by code needing
+ * non-standard timeout behavior when initiating a TFTP transfer.
+ */
+ulong TftpRRQTimeoutMSecs = TIMEOUT;
+int TftpRRQTimeoutCountMax = TIMEOUT_COUNT;
+
 static IPaddr_t TftpServerIP;
 static int	TftpServerPort;		/* The UDP port at their end		*/
 static int	TftpOurPort;		/* The UDP port at our end		*/
@@ -64,7 +79,7 @@ static char default_filename[DEFAULT_NAME_LEN];
 
 static char tftp_filename[MAX_LEN];
 
-#ifdef CFG_DIRECT_FLASH_TFTP
+#ifdef CONFIG_SYS_DIRECT_FLASH_TFTP
 extern flash_info_t flash_info[];
 #endif
 
@@ -106,11 +121,13 @@ store_block (unsigned block, uchar * src, unsigned len)
 {
 	ulong offset = block * TftpBlkSize + TftpBlockWrapOffset;
 	ulong newsize = offset + len;
-#ifdef CFG_DIRECT_FLASH_TFTP
+#ifdef CONFIG_SYS_DIRECT_FLASH_TFTP
 	int i, rc = 0;
 
-	for (i=0; i<CFG_MAX_FLASH_BANKS; i++) {
+	for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; i++) {
 		/* start address in flash? */
+		if (flash_info[i].flash_id == FLASH_UNKNOWN)
+			continue;
 		if (load_addr + offset >= flash_info[i].start[0]) {
 			rc = 1;
 			break;
@@ -126,7 +143,7 @@ store_block (unsigned block, uchar * src, unsigned len)
 		}
 	}
 	else
-#endif /* CFG_DIRECT_FLASH_TFTP */
+#endif /* CONFIG_SYS_DIRECT_FLASH_TFTP */
 	{
 		(void)memcpy((void *)(load_addr + offset), src, len);
 	}
@@ -178,7 +195,7 @@ TftpSend (void)
 		pkt += 5 /*strlen("octet")*/ + 1;
 		strcpy ((char *)pkt, "timeout");
 		pkt += 7 /*strlen("timeout")*/ + 1;
-		sprintf((char *)pkt, "%lu", TIMEOUT);
+		sprintf((char *)pkt, "%lu", TIMEOUT / 1000);
 #ifdef ET_DEBUG
 		printf("send option \"timeout %s\"\n", (char *)pkt);
 #endif
@@ -368,7 +385,9 @@ TftpHandler (uchar * pkt, unsigned dest, unsigned src, unsigned len)
 		}
 
 		TftpLastBlock = TftpBlock;
-		NetSetTimeout (TIMEOUT * CFG_HZ, TftpTimeout);
+		TftpTimeoutMSecs = TIMEOUT;
+		TftpTimeoutCountMax = TIMEOUT_COUNT;
+		NetSetTimeout (TftpTimeoutMSecs, TftpTimeout);
 
 		store_block (TftpBlock - 1, pkt + 2, len);
 
@@ -439,7 +458,7 @@ TftpHandler (uchar * pkt, unsigned dest, unsigned src, unsigned len)
 static void
 TftpTimeout (void)
 {
-	if (++TftpTimeoutCount > TIMEOUT_COUNT) {
+	if (++TftpTimeoutCount > TftpTimeoutCountMax) {
 		puts ("\nRetry count exceeded; starting again\n");
 #ifdef CONFIG_MCAST_TFTP
 		mcast_cleanup();
@@ -447,7 +466,7 @@ TftpTimeout (void)
 		NetStartAgain ();
 	} else {
 		puts ("T ");
-		NetSetTimeout (TIMEOUT * CFG_HZ, TftpTimeout);
+		NetSetTimeout (TftpTimeoutMSecs, TftpTimeout);
 		TftpSend ();
 	}
 }
@@ -480,9 +499,8 @@ TftpStart (void)
 			strncpy(tftp_filename, BootFile, MAX_LEN);
 			tftp_filename[MAX_LEN-1] = 0;
 		} else {
-			*p++ = '\0';
 			TftpServerIP = string_to_ip (BootFile);
-			strncpy(tftp_filename, p, MAX_LEN);
+			strncpy(tftp_filename, p + 1, MAX_LEN);
 			tftp_filename[MAX_LEN-1] = 0;
 		}
 	}
@@ -518,7 +536,10 @@ TftpStart (void)
 
 	puts ("Loading: *\b");
 
-	NetSetTimeout (TIMEOUT * CFG_HZ, TftpTimeout);
+	TftpTimeoutMSecs = TftpRRQTimeoutMSecs;
+	TftpTimeoutCountMax = TftpRRQTimeoutCountMax;
+
+	NetSetTimeout (TftpTimeoutMSecs, TftpTimeout);
 	NetSetHandler (TftpHandler);
 
 	TftpServerPort = WELL_KNOWN_PORT;
diff --git a/onenand_ipl/board/apollon/apollon.c b/onenand_ipl/board/apollon/apollon.c
index acf5c2998..4936e00f1 100644
--- a/onenand_ipl/board/apollon/apollon.c
+++ b/onenand_ipl/board/apollon/apollon.c
@@ -37,7 +37,7 @@ int board_init(void)
 	return 0;
 }
 
-#ifdef CFG_PRINTF
+#ifdef CONFIG_SYS_PRINTF
 /* Pin Muxing registers used for UART1 */
 /****************************************
  * Routine: muxSetupUART1  (ostboot)
@@ -63,7 +63,7 @@ static void muxSetupUART1(void)
  **********************************************************/
 int s_init(int skip)
 {
-#ifdef CFG_PRINTF
+#ifdef CONFIG_SYS_PRINTF
 	muxSetupUART1();
 #endif
 	return 0;
diff --git a/onenand_ipl/board/apollon/u-boot.onenand.lds b/onenand_ipl/board/apollon/u-boot.onenand.lds
index 559f9f2be..c8b00a15b 100644
--- a/onenand_ipl/board/apollon/u-boot.onenand.lds
+++ b/onenand_ipl/board/apollon/u-boot.onenand.lds
@@ -48,6 +48,6 @@ SECTIONS
 
 	. = ALIGN(4);
 	__bss_start = .;
-	.bss : { *(.bss) }
+	.bss : { *(.bss) . = ALIGN(4); }
 	_end = .;
 }
diff --git a/onenand_ipl/onenand_boot.c b/onenand_ipl/onenand_boot.c
index 35668ac84..aff62d29b 100644
--- a/onenand_ipl/onenand_boot.c
+++ b/onenand_ipl/onenand_boot.c
@@ -28,7 +28,7 @@
 
 #include "onenand_ipl.h"
 
-#ifdef CFG_PRINTF
+#ifdef CONFIG_SYS_PRINTF
 int print_info(void)
 {
 	printf(XLOADER_VERSION);
@@ -41,7 +41,7 @@ typedef int (init_fnc_t)(void);
 
 init_fnc_t *init_sequence[] = {
 	board_init,		/* basic board dependent setup */
-#ifdef CFG_PRINTF
+#ifdef CONFIG_SYS_PRINTF
 	serial_init,		/* serial communications setup */
 	print_info,
 #endif
@@ -58,17 +58,17 @@ void start_oneboot(void)
 			hang();
 	}
 
-	buf = (uchar *) CFG_LOAD_ADDR;
+	buf = (uchar *) CONFIG_SYS_LOAD_ADDR;
 
 	if (!onenand_read_block0(buf))
 		buf += ONENAND_BLOCK_SIZE;
 
-	if (buf == (uchar *)CFG_LOAD_ADDR)
+	if (buf == (uchar *)CONFIG_SYS_LOAD_ADDR)
 		hang();
 
 	/* go run U-Boot and never return */
 	printf("Starting OS Bootloader...\n");
-	((init_fnc_t *)CFG_LOAD_ADDR)();
+	((init_fnc_t *)CONFIG_SYS_LOAD_ADDR)();
 
 	/* should never come here */
 }
diff --git a/onenand_ipl/onenand_ipl.h b/onenand_ipl/onenand_ipl.h
index 9188b9662..3387998a9 100644
--- a/onenand_ipl/onenand_ipl.h
+++ b/onenand_ipl/onenand_ipl.h
@@ -25,14 +25,14 @@
 
 #define ONENAND_BLOCK_SIZE              2048
 
-#ifndef CFG_PRINTF
+#ifndef CONFIG_SYS_PRINTF
 #define printf(format, args...)
 #endif
 
 #define onenand_readw(a)        readw(a)
 #define onenand_writew(v, a)    writew(v, a)
 
-#define THIS_ONENAND(a)         (CFG_ONENAND_BASE + (a))
+#define THIS_ONENAND(a)         (CONFIG_SYS_ONENAND_BASE + (a))
 
 #define READ_INTERRUPT()                                                \
 	onenand_readw(THIS_ONENAND(ONENAND_REG_INTERRUPT))
diff --git a/onenand_ipl/onenand_read.c b/onenand_ipl/onenand_read.c
index 669b1ef5f..6d04943ba 100644
--- a/onenand_ipl/onenand_read.c
+++ b/onenand_ipl/onenand_read.c
@@ -67,7 +67,7 @@ static inline int onenand_read_page(ulong block, ulong page,
 #ifndef __HAVE_ARCH_MEMCPY32
 	p = (unsigned long *) buf;
 #endif
-	base = (unsigned long *) (CFG_ONENAND_BASE + ONENAND_DATARAM);
+	base = (unsigned long *) (CONFIG_SYS_ONENAND_BASE + ONENAND_DATARAM);
 
 	while (!(READ_INTERRUPT() & ONENAND_INT_READ))
 		continue;
diff --git a/post/Makefile b/post/Makefile
index a402e6adc..769e9c639 100644
--- a/post/Makefile
+++ b/post/Makefile
@@ -47,12 +47,17 @@ LIB	:= $(obj)$(LIB)
 
 all:	$(LIB)
 
+postdeps:
+	@for lib in $(SPLIB-y) ; do \
+		$(MAKE) -C `dirname $$lib` all ; \
+	done
+
 # generic POST library
 $(GPLIB): $(obj).depend $(OBJS)
 	$(AR) $(ARFLAGS) $@ $(OBJS)
 
 # specific POST libraries
-$(SPLIB): $(obj).depend
+$(SPLIB): $(obj).depend postdeps
 	$(MAKE) -C $(dir $(subst $(obj),,$@))
 
 # the POST lib archive
diff --git a/post/board/lwmon/sysmon.c b/post/board/lwmon/sysmon.c
index ea8b5a9c6..79a5151c0 100644
--- a/post/board/lwmon/sysmon.c
+++ b/post/board/lwmon/sysmon.c
@@ -48,7 +48,7 @@
 #include <watchdog.h>
 #include <i2c.h>
 
-#if CONFIG_POST & CFG_POST_SYSMON
+#if CONFIG_POST & CONFIG_SYS_POST_SYSMON
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -76,11 +76,11 @@ struct sysmon_s
 };
 
 static sysmon_t sysmon_lm87 =
-	{CFG_I2C_SYSMON_ADDR, sysmon_lm87_init, sysmon_i2c_read};
+	{CONFIG_SYS_I2C_SYSMON_ADDR, sysmon_lm87_init, sysmon_i2c_read};
 static sysmon_t sysmon_lm87_sgn =
-	{CFG_I2C_SYSMON_ADDR, sysmon_lm87_init, sysmon_i2c_read_sgn};
+	{CONFIG_SYS_I2C_SYSMON_ADDR, sysmon_lm87_init, sysmon_i2c_read_sgn};
 static sysmon_t sysmon_pic =
-	{CFG_I2C_PICIO_ADDR, sysmon_pic_init, sysmon_i2c_read};
+	{CONFIG_SYS_I2C_PICIO_ADDR, sysmon_pic_init, sysmon_i2c_read};
 
 static sysmon_t * sysmon_list[] =
 {
@@ -325,4 +325,4 @@ int sysmon_post_test (int flags)
 	return res;
 }
 
-#endif /* CONFIG_POST & CFG_POST_SYSMON */
+#endif /* CONFIG_POST & CONFIG_SYS_POST_SYSMON */
diff --git a/post/board/lwmon5/dsp.c b/post/board/lwmon5/dsp.c
index a96ac7d68..0e6d9084a 100644
--- a/post/board/lwmon5/dsp.c
+++ b/post/board/lwmon5/dsp.c
@@ -26,7 +26,7 @@
 
 #include <post.h>
 
-#if CONFIG_POST & CFG_POST_DSP
+#if CONFIG_POST & CONFIG_SYS_POST_DSP
 #include <asm/io.h>
 
 /* This test verifies DSP status bits in FPGA */
@@ -50,4 +50,4 @@ int dsp_post_test(int flags)
 	return ret;
 }
 
-#endif /* CONFIG_POST & CFG_POST_DSP */
+#endif /* CONFIG_POST & CONFIG_SYS_POST_DSP */
diff --git a/post/board/lwmon5/dspic.c b/post/board/lwmon5/dspic.c
index eb1c31ce3..ff2ed0566 100644
--- a/post/board/lwmon5/dspic.c
+++ b/post/board/lwmon5/dspic.c
@@ -40,12 +40,12 @@ DECLARE_GLOBAL_DATA_PTR;
 #define DSPIC_SYS_ERROR_REG	0x802
 #define DSPIC_VERSION_REG	0x804
 
-#if CONFIG_POST & CFG_POST_BSPEC1
+#if CONFIG_POST & CONFIG_SYS_POST_BSPEC1
 
 /* Verify that dsPIC ready test done early at hw init passed ok */
 int dspic_init_post_test(int flags)
 {
-	if (in_be32((void *)CFG_DSPIC_TEST_ADDR) & CFG_DSPIC_TEST_MASK) {
+	if (in_be32((void *)CONFIG_SYS_DSPIC_TEST_ADDR) & CONFIG_SYS_DSPIC_TEST_MASK) {
 		post_log("dsPIC init test failed\n");
 		return 1;
 	}
@@ -53,15 +53,15 @@ int dspic_init_post_test(int flags)
 	return 0;
 }
 
-#endif /* CONFIG_POST & CFG_POST_BSPEC1 */
+#endif /* CONFIG_POST & CONFIG_SYS_POST_BSPEC1 */
 
-#if CONFIG_POST & CFG_POST_BSPEC2
+#if CONFIG_POST & CONFIG_SYS_POST_BSPEC2
 /* Read a register from the dsPIC. */
 int dspic_read(ushort reg)
 {
 	uchar buf[2];
 
-	if (i2c_read(CFG_I2C_DSPIC_IO_ADDR, reg, 2, buf, 2))
+	if (i2c_read(CONFIG_SYS_I2C_DSPIC_IO_ADDR, reg, 2, buf, 2))
 		return -1;
 
 	return (uint)((buf[0] << 8) | buf[1]);
@@ -102,4 +102,4 @@ int dspic_post_test(int flags)
 	return ret;
 }
 
-#endif /* CONFIG_POST & CFG_POST_BSPEC2 */
+#endif /* CONFIG_POST & CONFIG_SYS_POST_BSPEC2 */
diff --git a/post/board/lwmon5/fpga.c b/post/board/lwmon5/fpga.c
index ef641d789..2b842908d 100644
--- a/post/board/lwmon5/fpga.c
+++ b/post/board/lwmon5/fpga.c
@@ -39,7 +39,7 @@ DECLARE_GLOBAL_DATA_PTR;
 #define FPGA_RAM_END		0xC4203FFF
 #define FPGA_STAT		0xC400000C
 
-#if CONFIG_POST & CFG_POST_BSPEC3
+#if CONFIG_POST & CONFIG_SYS_POST_BSPEC3
 
 /* Testpattern for fpga memorytest */
 static uint pattern[] = {
@@ -127,7 +127,7 @@ int fpga_post_test(int flags)
 	/* Enable write to FPGA RAM */
 	out_be32((void *)FPGA_STAT, in_be32((void *)FPGA_STAT) | 0x1000);
 
-	read_value = get_ram_size((void *)CFG_FPGA_BASE_1, 0x4000);
+	read_value = get_ram_size((void *)CONFIG_SYS_FPGA_BASE_1, 0x4000);
 	post_log("FPGA RAM size: %d bytes\n", read_value);
 
 	for (address = 0; address < 0x1000; address++) {
@@ -141,4 +141,4 @@ out:
 	return ret;
 }
 
-#endif /* CONFIG_POST & CFG_POST_BSPEC3 */
+#endif /* CONFIG_POST & CONFIG_SYS_POST_BSPEC3 */
diff --git a/post/board/lwmon5/gdc.c b/post/board/lwmon5/gdc.c
index bc166850f..eb16e36fc 100644
--- a/post/board/lwmon5/gdc.c
+++ b/post/board/lwmon5/gdc.c
@@ -38,7 +38,7 @@ DECLARE_GLOBAL_DATA_PTR;
 #define GDC_RAM_START   0xC0000000
 #define GDC_RAM_END     0xC2000000
 
-#if CONFIG_POST & CFG_POST_BSPEC4
+#if CONFIG_POST & CONFIG_SYS_POST_BSPEC4
 
 static int gdc_test_reg_one(uint value)
 {
@@ -93,4 +93,4 @@ int gdc_post_test(int flags)
 
 	return ret;
 }
-#endif /* CONFIG_POST & CFG_POST_BSPEC4 */
+#endif /* CONFIG_POST & CONFIG_SYS_POST_BSPEC4 */
diff --git a/post/board/lwmon5/sysmon.c b/post/board/lwmon5/sysmon.c
index 276622487..aef5bd018 100644
--- a/post/board/lwmon5/sysmon.c
+++ b/post/board/lwmon5/sysmon.c
@@ -51,7 +51,7 @@
 #include <mb862xx.h>
 #endif
 
-#if CONFIG_POST & CFG_POST_SYSMON
+#if CONFIG_POST & CONFIG_SYS_POST_SYSMON
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -90,7 +90,7 @@ struct sysmon_s
 };
 
 static sysmon_t sysmon_dspic =
-	{CFG_I2C_DSPIC_IO_ADDR, sysmon_dspic_init, sysmon_dspic_read};
+	{CONFIG_SYS_I2C_DSPIC_IO_ADDR, sysmon_dspic_init, sysmon_dspic_read};
 
 static sysmon_t * sysmon_list[] =
 {
@@ -267,4 +267,4 @@ int sysmon_post_test (int flags)
 
 	return res;
 }
-#endif /* CONFIG_POST & CFG_POST_SYSMON */
+#endif /* CONFIG_POST & CONFIG_SYS_POST_SYSMON */
diff --git a/post/board/lwmon5/watchdog.c b/post/board/lwmon5/watchdog.c
index 1246278a5..44f048832 100644
--- a/post/board/lwmon5/watchdog.c
+++ b/post/board/lwmon5/watchdog.c
@@ -31,7 +31,7 @@
 
 #include <post.h>
 
-#if CONFIG_POST & CFG_POST_WATCHDOG
+#if CONFIG_POST & CONFIG_SYS_POST_WATCHDOG
 
 #include <watchdog.h>
 #include <asm/gpio.h>
@@ -39,20 +39,20 @@
 
 static uint watchdog_magic_read(void)
 {
-	return in_be32((void *)CFG_WATCHDOG_FLAGS_ADDR) &
-		CFG_WATCHDOG_MAGIC_MASK;
+	return in_be32((void *)CONFIG_SYS_WATCHDOG_FLAGS_ADDR) &
+		CONFIG_SYS_WATCHDOG_MAGIC_MASK;
 }
 
 static void watchdog_magic_write(uint value)
 {
-	out_be32((void *)CFG_WATCHDOG_FLAGS_ADDR, value |
-		(in_be32((void *)CFG_WATCHDOG_FLAGS_ADDR) &
-			~CFG_WATCHDOG_MAGIC_MASK));
+	out_be32((void *)CONFIG_SYS_WATCHDOG_FLAGS_ADDR, value |
+		(in_be32((void *)CONFIG_SYS_WATCHDOG_FLAGS_ADDR) &
+			~CONFIG_SYS_WATCHDOG_MAGIC_MASK));
 }
 
 int sysmon1_post_test(int flags)
 {
-	if (gpio_read_in_bit(CFG_GPIO_SYSMON_STATUS) == 0) {
+	if (gpio_read_in_bit(CONFIG_SYS_GPIO_SYSMON_STATUS) == 0) {
 		/*
 		 * 3.1. GPIO62 is low
 		 * Assuming system voltage failure.
@@ -79,7 +79,7 @@ int lwmon5_watchdog_post_test(int flags)
 		return 1;
 	}
 
-	if (watchdog_magic_read() != CFG_WATCHDOG_MAGIC) {
+	if (watchdog_magic_read() != CONFIG_SYS_WATCHDOG_MAGIC) {
 		/* 3.2. Scratch register 1 differs from magic value 0x1248xxxx
 		 * Assuming PowerOn
 		 */
@@ -88,18 +88,18 @@ int lwmon5_watchdog_post_test(int flags)
 		ulong time;
 
 		/* 3.2.1. Set magic value to scratch register */
-		watchdog_magic_write(CFG_WATCHDOG_MAGIC);
+		watchdog_magic_write(CONFIG_SYS_WATCHDOG_MAGIC);
 
 		ints = disable_interrupts ();
 		/* 3.2.2. strobe watchdog once */
 		WATCHDOG_RESET();
-		out_be32((void *)CFG_WATCHDOG_TIME_ADDR, 0);
+		out_be32((void *)CONFIG_SYS_WATCHDOG_TIME_ADDR, 0);
 		/* 3.2.3. save time of strobe in scratch register 2 */
 		base = post_time_ms (0);
 
 		/* 3.2.4. Wait for 150 ms (enough for reset to happen) */
 		while ((time = post_time_ms (base)) < 150)
-			out_be32((void *)CFG_WATCHDOG_TIME_ADDR, time);
+			out_be32((void *)CONFIG_SYS_WATCHDOG_TIME_ADDR, time);
 		if (ints)
 			enable_interrupts ();
 
@@ -116,7 +116,7 @@ int lwmon5_watchdog_post_test(int flags)
 		 */
 		ulong time;
 		/* 3.3.1. So, the test succeed, save measured time to syslog. */
-		time = in_be32((void *)CFG_WATCHDOG_TIME_ADDR);
+		time = in_be32((void *)CONFIG_SYS_WATCHDOG_TIME_ADDR);
 		post_log("hw watchdog time : %u ms, passed ", time);
 		/* 3.3.2. Set scratch register 1 to 0x0000xxxx */
 		watchdog_magic_write(0);
@@ -125,4 +125,4 @@ int lwmon5_watchdog_post_test(int flags)
 	return -1;
 }
 
-#endif /* CONFIG_POST & CFG_POST_WATCHDOG */
+#endif /* CONFIG_POST & CONFIG_SYS_POST_WATCHDOG */
diff --git a/post/board/netta/codec.c b/post/board/netta/codec.c
index 115e331fd..a095a9179 100644
--- a/post/board/netta/codec.c
+++ b/post/board/netta/codec.c
@@ -33,7 +33,7 @@
 
 #include <post.h>
 
-#if CONFIG_POST & CFG_POST_CODEC
+#if CONFIG_POST & CONFIG_SYS_POST_CODEC
 
 extern int board_post_codec(int flags);
 
@@ -42,4 +42,4 @@ int codec_post_test (int flags)
 	return board_post_codec(flags);
 }
 
-#endif /* CONFIG_POST & CFG_POST_CODEC */
+#endif /* CONFIG_POST & CONFIG_SYS_POST_CODEC */
diff --git a/post/board/netta/dsp.c b/post/board/netta/dsp.c
index dcef4e821..438ced553 100644
--- a/post/board/netta/dsp.c
+++ b/post/board/netta/dsp.c
@@ -33,7 +33,7 @@
 
 #include <post.h>
 
-#if CONFIG_POST & CFG_POST_DSP
+#if CONFIG_POST & CONFIG_SYS_POST_DSP
 
 extern int board_post_dsp(int flags);
 
@@ -42,4 +42,4 @@ int dsp_post_test (int flags)
 	return board_post_dsp(flags);
 }
 
-#endif /* CONFIG_POST & CFG_POST_DSP */
+#endif /* CONFIG_POST & CONFIG_SYS_POST_DSP */
diff --git a/post/cpu/mpc8xx/cache.c b/post/cpu/mpc8xx/cache.c
index 36965a167..06cb501bd 100644
--- a/post/cpu/mpc8xx/cache.c
+++ b/post/cpu/mpc8xx/cache.c
@@ -32,7 +32,7 @@
 #include <post.h>
 #include <watchdog.h>
 
-#if CONFIG_POST & CFG_POST_CACHE
+#if CONFIG_POST & CONFIG_SYS_POST_CACHE
 
 #define CACHE_POST_SIZE	1024
 
@@ -75,4 +75,4 @@ int cache_post_test (int flags)
 	return res;
 }
 
-#endif /* CONFIG_POST & CFG_POST_CACHE */
+#endif /* CONFIG_POST & CONFIG_SYS_POST_CACHE */
diff --git a/post/cpu/mpc8xx/cache_8xx.S b/post/cpu/mpc8xx/cache_8xx.S
index a3fc39bda..097eedb42 100644
--- a/post/cpu/mpc8xx/cache_8xx.S
+++ b/post/cpu/mpc8xx/cache_8xx.S
@@ -33,7 +33,7 @@
 #include <ppc_defs.h>
 #include <asm/cache.h>
 
-#if CONFIG_POST & CFG_POST_CACHE
+#if CONFIG_POST & CONFIG_SYS_POST_CACHE
 
 	.text
 
@@ -490,4 +490,4 @@ cache_post_test6_data:
 	blr
 
 #endif /* CONFIG_MPC823 || MPC850 || MPC855 || MPC860 */
-#endif /* CONFIG_POST & CFG_POST_CACHE */
+#endif /* CONFIG_POST & CONFIG_SYS_POST_CACHE */
diff --git a/post/cpu/mpc8xx/ether.c b/post/cpu/mpc8xx/ether.c
index 2fa5cf4ac..5622cb7d2 100644
--- a/post/cpu/mpc8xx/ether.c
+++ b/post/cpu/mpc8xx/ether.c
@@ -36,7 +36,7 @@
  */
 
 #include <post.h>
-#if CONFIG_POST & CFG_POST_ETHER
+#if CONFIG_POST & CONFIG_SYS_POST_ETHER
 #if defined(CONFIG_8xx)
 #include <commproc.h>
 #elif defined(CONFIG_MPC8260)
@@ -120,7 +120,7 @@ CPM_CR_CH_SCC4 };
 	int i;
 	scc_enet_t *pram_ptr;
 
-	volatile immap_t *immr = (immap_t *) CFG_IMMR;
+	volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
 
 	immr->im_cpm.cp_scc[scc_index].scc_gsmrl &=
 			~(SCC_GSMRL_ENR | SCC_GSMRL_ENT);
@@ -143,7 +143,7 @@ CPM_CR_CH_SCC4 };
 	rxIdx = 0;
 	txIdx = 0;
 
-#ifdef CFG_ALLOC_DPRAM
+#ifdef CONFIG_SYS_ALLOC_DPRAM
 	rtx = (RTXBD *) (immr->im_cpm.cp_dpmem +
 					 dpram_alloc_align (sizeof (RTXBD), 8));
 #else
@@ -452,7 +452,7 @@ CPM_CR_CH_SCC4 };
 
 static void scc_halt (int scc_index)
 {
-	volatile immap_t *immr = (immap_t *) CFG_IMMR;
+	volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
 
 	immr->im_cpm.cp_scc[scc_index].scc_gsmrl &=
 			~(SCC_GSMRL_ENR | SCC_GSMRL_ENT);
@@ -624,4 +624,4 @@ int ether_post_test (int flags)
 	return res;
 }
 
-#endif /* CONFIG_POST & CFG_POST_ETHER */
+#endif /* CONFIG_POST & CONFIG_SYS_POST_ETHER */
diff --git a/post/cpu/mpc8xx/spr.c b/post/cpu/mpc8xx/spr.c
index 83f04da55..db84dbe50 100644
--- a/post/cpu/mpc8xx/spr.c
+++ b/post/cpu/mpc8xx/spr.c
@@ -35,7 +35,7 @@
 
 #include <post.h>
 
-#if CONFIG_POST & CFG_POST_SPR
+#if CONFIG_POST & CONFIG_SYS_POST_SPR
 
 static struct
 {
@@ -80,7 +80,7 @@ static struct
 	{159,	"BAR",		0x00000000,	0x00000000},
 	{630,	"DPDR",		0x00000000,	0x00000000},
 	{631,	"DPIR",		0x00000000,	0x00000000},
-	{638,	"IMMR",		0xFFFF0000,	CFG_IMMR  },
+	{638,	"IMMR",		0xFFFF0000,	CONFIG_SYS_IMMR  },
 	{560,	"IC_CST",	0x8E380000,	0x00000000},
 	{561,	"IC_ADR",	0x00000000,	0x00000000},
 	{562,	"IC_DAT",	0x00000000,	0x00000000},
@@ -146,4 +146,4 @@ int spr_post_test (int flags)
 
 	return ret;
 }
-#endif /* CONFIG_POST & CFG_POST_SPR */
+#endif /* CONFIG_POST & CONFIG_SYS_POST_SPR */
diff --git a/post/cpu/mpc8xx/uart.c b/post/cpu/mpc8xx/uart.c
index 635debe8d..f351ac06d 100644
--- a/post/cpu/mpc8xx/uart.c
+++ b/post/cpu/mpc8xx/uart.c
@@ -37,7 +37,7 @@
  */
 
 #include <post.h>
-#if CONFIG_POST & CFG_POST_UART
+#if CONFIG_POST & CONFIG_SYS_POST_UART
 #if defined(CONFIG_8xx)
 #include <commproc.h>
 #elif defined(CONFIG_MPC8260)
@@ -84,7 +84,7 @@ static void smc_init (int smc_index)
 {
 	static int cpm_cr_ch[] = { CPM_CR_CH_SMC1, CPM_CR_CH_SMC2 };
 
-	volatile immap_t *im = (immap_t *) CFG_IMMR;
+	volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR;
 	volatile smc_t *sp;
 	volatile smc_uart_t *up;
 	volatile cbd_t *tbdf, *rbdf;
@@ -105,15 +105,15 @@ static void smc_init (int smc_index)
 	im->im_siu_conf.sc_sdcr = 1;
 
 	/* clear error conditions */
-#ifdef	CFG_SDSR
-	im->im_sdma.sdma_sdsr = CFG_SDSR;
+#ifdef	CONFIG_SYS_SDSR
+	im->im_sdma.sdma_sdsr = CONFIG_SYS_SDSR;
 #else
 	im->im_sdma.sdma_sdsr = 0x83;
 #endif
 
 	/* clear SDMA interrupt mask */
-#ifdef	CFG_SDMR
-	im->im_sdma.sdma_sdmr = CFG_SDMR;
+#ifdef	CONFIG_SYS_SDMR
+	im->im_sdma.sdma_sdmr = CONFIG_SYS_SDMR;
 #else
 	im->im_sdma.sdma_sdmr = 0x00;
 #endif
@@ -133,7 +133,7 @@ static void smc_init (int smc_index)
 	 * the buffer descriptors.
 	 */
 
-#ifdef CFG_ALLOC_DPRAM
+#ifdef CONFIG_SYS_ALLOC_DPRAM
 	dpaddr = dpram_alloc_align (sizeof (cbd_t) * 2 + 2, 8);
 #else
 	dpaddr = CPM_POST_BASE;
@@ -218,7 +218,7 @@ static void smc_putc (int smc_index, const char c)
 	volatile cbd_t *tbdf;
 	volatile char *buf;
 	volatile smc_uart_t *up;
-	volatile immap_t *im = (immap_t *) CFG_IMMR;
+	volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR;
 	volatile cpm8xx_t *cpmp = &(im->im_cpm);
 
 	up = (smc_uart_t *) & cpmp->cp_dparam[proff_smc[smc_index]];
@@ -250,7 +250,7 @@ static int smc_getc (int smc_index)
 	volatile cbd_t *rbdf;
 	volatile unsigned char *buf;
 	volatile smc_uart_t *up;
-	volatile immap_t *im = (immap_t *) CFG_IMMR;
+	volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR;
 	volatile cpm8xx_t *cpmp = &(im->im_cpm);
 	unsigned char c;
 	int i;
@@ -293,7 +293,7 @@ static void scc_init (int scc_index)
 		CPM_CR_CH_SCC4,
 	};
 
-	volatile immap_t *im = (immap_t *) CFG_IMMR;
+	volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR;
 	volatile scc_t *sp;
 	volatile scc_uart_t *up;
 	volatile cbd_t *tbdf, *rbdf;
@@ -313,7 +313,7 @@ static void scc_init (int scc_index)
 	/* Allocate space for two buffer descriptors in the DP ram.
 	 */
 
-#ifdef CFG_ALLOC_DPRAM
+#ifdef CONFIG_SYS_ALLOC_DPRAM
 	dpaddr = dpram_alloc_align (sizeof (cbd_t) * 2 + 2, 8);
 #else
 	dpaddr = CPM_POST_BASE;
@@ -420,7 +420,7 @@ static void scc_init (int scc_index)
 
 static void scc_halt(int scc_index)
 {
-	volatile immap_t *im = (immap_t *) CFG_IMMR;
+	volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR;
 	volatile cpm8xx_t *cp = &(im->im_cpm);
 	volatile scc_t *sp = (scc_t *) & (cp->cp_scc[scc_index]);
 
@@ -432,7 +432,7 @@ static void scc_putc (int scc_index, const char c)
 	volatile cbd_t *tbdf;
 	volatile char *buf;
 	volatile scc_uart_t *up;
-	volatile immap_t *im = (immap_t *) CFG_IMMR;
+	volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR;
 	volatile cpm8xx_t *cpmp = &(im->im_cpm);
 
 	up = (scc_uart_t *) & cpmp->cp_dparam[proff_scc[scc_index]];
@@ -464,7 +464,7 @@ static int scc_getc (int scc_index)
 	volatile cbd_t *rbdf;
 	volatile unsigned char *buf;
 	volatile scc_uart_t *up;
-	volatile immap_t *im = (immap_t *) CFG_IMMR;
+	volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR;
 	volatile cpm8xx_t *cpmp = &(im->im_cpm);
 	unsigned char c;
 	int i;
@@ -553,4 +553,4 @@ int uart_post_test (int flags)
 	return res;
 }
 
-#endif /* CONFIG_POST & CFG_POST_UART */
+#endif /* CONFIG_POST & CONFIG_SYS_POST_UART */
diff --git a/post/cpu/mpc8xx/usb.c b/post/cpu/mpc8xx/usb.c
index 58779812f..e3fe075be 100644
--- a/post/cpu/mpc8xx/usb.c
+++ b/post/cpu/mpc8xx/usb.c
@@ -36,7 +36,7 @@
 
 #include <post.h>
 
-#if CONFIG_POST & CFG_POST_USB
+#if CONFIG_POST & CONFIG_SYS_POST_USB
 
 #include <commproc.h>
 #include <command.h>
@@ -105,7 +105,7 @@ typedef struct usb {
 int usb_post_test (int flags)
 {
 	int res = -1;
-	volatile immap_t *im = (immap_t *) CFG_IMMR;
+	volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR;
 	volatile cpm8xx_t *cp = &(im->im_cpm);
 	volatile usb_param_t *pram_ptr;
 	uint dpram;
@@ -262,4 +262,4 @@ int usb_post_test (int flags)
 	return res;
 }
 
-#endif /* CONFIG_POST & CFG_POST_USB */
+#endif /* CONFIG_POST & CONFIG_SYS_POST_USB */
diff --git a/post/cpu/mpc8xx/watchdog.c b/post/cpu/mpc8xx/watchdog.c
index f94158aa6..da191c232 100644
--- a/post/cpu/mpc8xx/watchdog.c
+++ b/post/cpu/mpc8xx/watchdog.c
@@ -36,7 +36,7 @@
 #include <post.h>
 #include <watchdog.h>
 
-#if CONFIG_POST & CFG_POST_WATCHDOG
+#if CONFIG_POST & CONFIG_SYS_POST_WATCHDOG
 
 static ulong gettbl (void)
 {
@@ -72,4 +72,4 @@ int watchdog_post_test (int flags)
 	}
 }
 
-#endif /* CONFIG_POST & CFG_POST_WATCHDOG */
+#endif /* CONFIG_POST & CONFIG_SYS_POST_WATCHDOG */
diff --git a/post/cpu/ppc4xx/cache.c b/post/cpu/ppc4xx/cache.c
index be6a2bf54..482f819f2 100644
--- a/post/cpu/ppc4xx/cache.c
+++ b/post/cpu/ppc4xx/cache.c
@@ -33,7 +33,7 @@
 
 #include <post.h>
 
-#if CONFIG_POST & CFG_POST_CACHE
+#if CONFIG_POST & CONFIG_SYS_POST_CACHE
 
 #include <asm/mmu.h>
 #include <watchdog.h>
@@ -54,7 +54,7 @@ __attribute__((__aligned__(CACHE_POST_SIZE)));
 
 int cache_post_test (int flags)
 {
-	void *virt = (void *)CFG_POST_CACHE_ADDR;
+	void *virt = (void *)CONFIG_SYS_POST_CACHE_ADDR;
 	int ints;
 	int res = 0;
 	int tlb = -1;		/* index to the victim TLB entry */
@@ -119,4 +119,4 @@ int cache_post_test (int flags)
 	return res;
 }
 
-#endif /* CONFIG_POST & CFG_POST_CACHE */
+#endif /* CONFIG_POST & CONFIG_SYS_POST_CACHE */
diff --git a/post/cpu/ppc4xx/cache_4xx.S b/post/cpu/ppc4xx/cache_4xx.S
index 455ffa072..3f3e5850f 100644
--- a/post/cpu/ppc4xx/cache_4xx.S
+++ b/post/cpu/ppc4xx/cache_4xx.S
@@ -31,7 +31,7 @@
 #include <asm/cache.h>
 #include <asm/mmu.h>
 
-#if CONFIG_POST & CFG_POST_CACHE
+#if CONFIG_POST & CONFIG_SYS_POST_CACHE
 
 	.text
 
@@ -115,8 +115,8 @@ cache_post_wb:
  */
 cache_post_dinvalidate:
 	dcbi	r0, r3
-	addi	r3, r3, CFG_CACHELINE_SIZE
-	subic.	r4, r4, CFG_CACHELINE_SIZE
+	addi	r3, r3, CONFIG_SYS_CACHELINE_SIZE
+	subic.	r4, r4, CONFIG_SYS_CACHELINE_SIZE
 	bgt	cache_post_dinvalidate
 	sync
 	blr
@@ -125,8 +125,8 @@ cache_post_dinvalidate:
  */
 cache_post_dstore:
 	dcbst	r0, r3
-	addi	r3, r3, CFG_CACHELINE_SIZE
-	subic.	r4, r4, CFG_CACHELINE_SIZE
+	addi	r3, r3, CONFIG_SYS_CACHELINE_SIZE
+	subic.	r4, r4, CONFIG_SYS_CACHELINE_SIZE
 	bgt	cache_post_dstore
 	sync
 	blr
@@ -135,8 +135,8 @@ cache_post_dstore:
  */
 cache_post_dtouch:
 	dcbt	r0, r3
-	addi	r3, r3, CFG_CACHELINE_SIZE
-	subic.	r4, r4, CFG_CACHELINE_SIZE
+	addi	r3, r3, CONFIG_SYS_CACHELINE_SIZE
+	subic.	r4, r4, CONFIG_SYS_CACHELINE_SIZE
 	bgt	cache_post_dtouch
 	sync
 	blr
@@ -486,4 +486,4 @@ cache_post_test_inst:
 	li	r3, -1
 	blr
 
-#endif /* CONFIG_POST & CFG_POST_CACHE */
+#endif /* CONFIG_POST & CONFIG_SYS_POST_CACHE */
diff --git a/post/cpu/ppc4xx/denali_ecc.c b/post/cpu/ppc4xx/denali_ecc.c
index 12a1bbfa8..6ab159313 100644
--- a/post/cpu/ppc4xx/denali_ecc.c
+++ b/post/cpu/ppc4xx/denali_ecc.c
@@ -35,7 +35,7 @@
 
 #include <post.h>
 
-#if CONFIG_POST & CFG_POST_ECC
+#if CONFIG_POST & CONFIG_SYS_POST_ECC
 
 /*
  * MEMORY ECC test
@@ -267,5 +267,5 @@ int ecc_post_test(int flags)
 	debug("ecc_post_test() returning %d\n", ret);
 	return ret;
 }
-#endif /* CONFIG_POST & CFG_POST_ECC */
+#endif /* CONFIG_POST & CONFIG_SYS_POST_ECC */
 #endif /* defined(CONFIG_440EPX) || defined(CONFIG_440GRX) */
diff --git a/post/cpu/ppc4xx/ether.c b/post/cpu/ppc4xx/ether.c
index ccbfcf91a..e40e19be2 100644
--- a/post/cpu/ppc4xx/ether.c
+++ b/post/cpu/ppc4xx/ether.c
@@ -39,7 +39,7 @@
 
 #include <post.h>
 
-#if CONFIG_POST & CFG_POST_ETHER
+#if CONFIG_POST & CONFIG_SYS_POST_ETHER
 
 #include <asm/cache.h>
 #include <asm/io.h>
@@ -209,7 +209,7 @@ static void ether_post_init (int devnum, int hw_addr)
 	mtdcr (malrxcasr, (MAL_TXRX_CASR >> devnum));
 
 	/* set internal loopback mode */
-#ifdef CFG_POST_ETHER_EXT_LOOPBACK
+#ifdef CONFIG_SYS_POST_ETHER_EXT_LOOPBACK
 	out_be32 ((void*)(EMAC_M1 + hw_addr), EMAC_M1_FDE | 0 |
 		  EMAC_M1_RFS_4K | EMAC_M1_TX_FIFO_2K |
 		  EMAC_M1_MF_100MBPS | EMAC_M1_IST |
@@ -406,8 +406,8 @@ int ether_post_test (int flags)
 	int i;
 
 	/* Allocate tx & rx packet buffers */
-	tx_buf = malloc (PKTSIZE_ALIGN + CFG_CACHELINE_SIZE);
-	rx_buf = malloc (PKTSIZE_ALIGN + CFG_CACHELINE_SIZE);
+	tx_buf = malloc (PKTSIZE_ALIGN + CONFIG_SYS_CACHELINE_SIZE);
+	rx_buf = malloc (PKTSIZE_ALIGN + CONFIG_SYS_CACHELINE_SIZE);
 
 	if (!tx_buf || !rx_buf) {
 		printf ("Failed to allocate packet buffers\n");
@@ -427,4 +427,4 @@ out_free:
 	return res;
 }
 
-#endif /* CONFIG_POST & CFG_POST_ETHER */
+#endif /* CONFIG_POST & CONFIG_SYS_POST_ETHER */
diff --git a/post/cpu/ppc4xx/ocm.c b/post/cpu/ppc4xx/ocm.c
index 88aa93ea1..584e30cf8 100644
--- a/post/cpu/ppc4xx/ocm.c
+++ b/post/cpu/ppc4xx/ocm.c
@@ -38,19 +38,19 @@ DECLARE_GLOBAL_DATA_PTR;
 #define OCM_TEST_PATTERN1	0x55555555
 #define OCM_TEST_PATTERN2	0xAAAAAAAA
 
-#if CONFIG_POST & CFG_POST_OCM
+#if CONFIG_POST & CONFIG_SYS_POST_OCM
 
 static uint ocm_status_read(void)
 {
-	return in_be32((void *)CFG_OCM_STATUS_ADDR) &
-		CFG_OCM_STATUS_MASK;
+	return in_be32((void *)CONFIG_SYS_OCM_STATUS_ADDR) &
+		CONFIG_SYS_OCM_STATUS_MASK;
 }
 
 static void ocm_status_write(uint value)
 {
-	out_be32((void *)CFG_OCM_STATUS_ADDR, value |
-		(in_be32((void *)CFG_OCM_STATUS_ADDR) &
-			~CFG_OCM_STATUS_MASK));
+	out_be32((void *)CONFIG_SYS_OCM_STATUS_ADDR, value |
+		(in_be32((void *)CONFIG_SYS_OCM_STATUS_ADDR) &
+			~CONFIG_SYS_OCM_STATUS_MASK));
 }
 
 static inline int ocm_test_word(uint value, uint *address)
@@ -68,11 +68,11 @@ int ocm_post_test(int flags)
 {
 	uint   old_value;
 	int    ret = 0;
-	uint  *address = (uint*)CFG_OCM_BASE;
+	uint  *address = (uint*)CONFIG_SYS_OCM_BASE;
 
-	if (ocm_status_read() == CFG_OCM_STATUS_OK)
+	if (ocm_status_read() == CONFIG_SYS_OCM_STATUS_OK)
 		return 0;
-	for (; address < (uint*)(CFG_OCM_BASE + CFG_OCM_SIZE); address++) {
+	for (; address < (uint*)(CONFIG_SYS_OCM_BASE + CONFIG_SYS_OCM_SIZE); address++) {
 		old_value = *address;
 		if (ocm_test_word(OCM_TEST_PATTERN1, address) ||
 				ocm_test_word(OCM_TEST_PATTERN2, address)) {
@@ -83,7 +83,7 @@ int ocm_post_test(int flags)
 		}
 		*address = old_value;
 	}
-	ocm_status_write(ret ? CFG_OCM_STATUS_FAIL : CFG_OCM_STATUS_OK);
+	ocm_status_write(ret ? CONFIG_SYS_OCM_STATUS_FAIL : CONFIG_SYS_OCM_STATUS_OK);
 	return ret;
 }
-#endif /* CONFIG_POST & CFG_POST_OCM */
+#endif /* CONFIG_POST & CONFIG_SYS_POST_OCM */
diff --git a/post/cpu/ppc4xx/spr.c b/post/cpu/ppc4xx/spr.c
index 110df6e91..ecb87b53a 100644
--- a/post/cpu/ppc4xx/spr.c
+++ b/post/cpu/ppc4xx/spr.c
@@ -37,7 +37,7 @@
 
 #include <post.h>
 
-#if CONFIG_POST & CFG_POST_SPR
+#if CONFIG_POST & CONFIG_SYS_POST_SPR
 
 #include <asm/processor.h>
 
@@ -198,4 +198,4 @@ int spr_post_test (int flags)
 	return ret;
 }
 
-#endif /* CONFIG_POST & CFG_POST_SPR */
+#endif /* CONFIG_POST & CONFIG_SYS_POST_SPR */
diff --git a/post/cpu/ppc4xx/uart.c b/post/cpu/ppc4xx/uart.c
index 1a57c3dd1..84a4d0a0d 100644
--- a/post/cpu/ppc4xx/uart.c
+++ b/post/cpu/ppc4xx/uart.c
@@ -34,14 +34,14 @@
 
 #include <post.h>
 
-#if CONFIG_POST & CFG_POST_UART
+#if CONFIG_POST & CONFIG_SYS_POST_UART
 
 /*
  * This table defines the UART's that should be tested and can
  * be overridden in the board config file
  */
-#ifndef CFG_POST_UART_TABLE
-#define CFG_POST_UART_TABLE	{UART0_BASE, UART1_BASE, UART2_BASE, UART3_BASE}
+#ifndef CONFIG_SYS_POST_UART_TABLE
+#define CONFIG_SYS_POST_UART_TABLE	{UART0_BASE, UART1_BASE, UART2_BASE, UART3_BASE}
 #endif
 
 #include <asm/processor.h>
@@ -50,17 +50,17 @@
 #if defined(CONFIG_440)
 #if defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
     defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
-#define UART0_BASE  CFG_PERIPHERAL_BASE + 0x00000300
-#define UART1_BASE  CFG_PERIPHERAL_BASE + 0x00000400
-#define UART2_BASE  CFG_PERIPHERAL_BASE + 0x00000500
-#define UART3_BASE  CFG_PERIPHERAL_BASE + 0x00000600
+#define UART0_BASE  CONFIG_SYS_PERIPHERAL_BASE + 0x00000300
+#define UART1_BASE  CONFIG_SYS_PERIPHERAL_BASE + 0x00000400
+#define UART2_BASE  CONFIG_SYS_PERIPHERAL_BASE + 0x00000500
+#define UART3_BASE  CONFIG_SYS_PERIPHERAL_BASE + 0x00000600
 #else
-#define UART0_BASE  CFG_PERIPHERAL_BASE + 0x00000200
-#define UART1_BASE  CFG_PERIPHERAL_BASE + 0x00000300
+#define UART0_BASE  CONFIG_SYS_PERIPHERAL_BASE + 0x00000200
+#define UART1_BASE  CONFIG_SYS_PERIPHERAL_BASE + 0x00000300
 #endif
 
 #if defined(CONFIG_440SP) || defined(CONFIG_440SPE)
-#define UART2_BASE  CFG_PERIPHERAL_BASE + 0x00000600
+#define UART2_BASE  CONFIG_SYS_PERIPHERAL_BASE + 0x00000600
 #endif
 
 #if defined(CONFIG_440GP)
@@ -147,7 +147,7 @@
 DECLARE_GLOBAL_DATA_PTR;
 
 #if defined(CONFIG_440) || defined(CONFIG_405EX)
-#if !defined(CFG_EXT_SERIAL_CLOCK)
+#if !defined(CONFIG_SYS_EXT_SERIAL_CLOCK)
 static void serial_divs (int baudrate, unsigned long *pudiv,
 			 unsigned short *pbdiv)
 {
@@ -196,7 +196,7 @@ static int uart_post_init (unsigned long dev_base)
 	unsigned long udiv;
 	unsigned short bdiv;
 	volatile char val;
-#ifdef CFG_EXT_SERIAL_CLOCK
+#ifdef CONFIG_SYS_EXT_SERIAL_CLOCK
 	unsigned long tmp;
 #endif
 	int i;
@@ -209,11 +209,11 @@ static int uart_post_init (unsigned long dev_base)
 	MFREG(UART0_SDR, reg);
 	reg &= ~CR0_MASK;
 
-#ifdef CFG_EXT_SERIAL_CLOCK
+#ifdef CONFIG_SYS_EXT_SERIAL_CLOCK
 	reg |= CR0_EXTCLK_ENA;
 	udiv = 1;
 	tmp  = gd->baudrate * 16;
-	bdiv = (CFG_EXT_SERIAL_CLOCK + tmp / 2) / tmp;
+	bdiv = (CONFIG_SYS_EXT_SERIAL_CLOCK + tmp / 2) / tmp;
 #else
 	/* For 440, the cpu clock is on divider chain A, UART on divider
 	 * chain B ... so cpu clock is irrelevant. Get the "optimized"
@@ -278,7 +278,7 @@ static int uart_post_init (unsigned long dev_base)
 #ifdef CONFIG_405EP
 	reg = mfdcr(cpc0_ucr) & ~(UCR0_MASK | UCR1_MASK);
 	clk = gd->cpu_clk;
-	tmp = CFG_BASE_BAUD * 16;
+	tmp = CONFIG_SYS_BASE_BAUD * 16;
 	udiv = (clk + tmp / 2) / tmp;
 	if (udiv > UDIV_MAX)                    /* max. n bits for udiv */
 		udiv = UDIV_MAX;
@@ -287,16 +287,16 @@ static int uart_post_init (unsigned long dev_base)
 	mtdcr (cpc0_ucr, reg);
 #else /* CONFIG_405EP */
 	reg = mfdcr(cntrl0) & ~CR0_MASK;
-#ifdef CFG_EXT_SERIAL_CLOCK
-	clk = CFG_EXT_SERIAL_CLOCK;
+#ifdef CONFIG_SYS_EXT_SERIAL_CLOCK
+	clk = CONFIG_SYS_EXT_SERIAL_CLOCK;
 	udiv = 1;
 	reg |= CR0_EXTCLK_ENA;
 #else
 	clk = gd->cpu_clk;
-#ifdef CFG_405_UART_ERRATA_59
+#ifdef CONFIG_SYS_405_UART_ERRATA_59
 	udiv = 31;			/* Errata 59: stuck at 31 */
 #else
-	tmp = CFG_BASE_BAUD * 16;
+	tmp = CONFIG_SYS_BASE_BAUD * 16;
 	udiv = (clk + tmp / 2) / tmp;
 	if (udiv > UDIV_MAX)                    /* max. n bits for udiv */
 		udiv = UDIV_MAX;
@@ -375,7 +375,7 @@ done:
 int uart_post_test (int flags)
 {
 	int i, res = 0;
-	static unsigned long base[] = CFG_POST_UART_TABLE;
+	static unsigned long base[] = CONFIG_SYS_POST_UART_TABLE;
 
 	for (i = 0; i < sizeof (base) / sizeof (base[0]); i++) {
 		if (test_ctlr (base[i], i))
@@ -386,4 +386,4 @@ int uart_post_test (int flags)
 	return res;
 }
 
-#endif /* CONFIG_POST & CFG_POST_UART */
+#endif /* CONFIG_POST & CONFIG_SYS_POST_UART */
diff --git a/post/cpu/ppc4xx/watchdog.c b/post/cpu/ppc4xx/watchdog.c
index 7fdecb485..221adfc11 100644
--- a/post/cpu/ppc4xx/watchdog.c
+++ b/post/cpu/ppc4xx/watchdog.c
@@ -37,7 +37,7 @@
 
 #include <post.h>
 
-#if CONFIG_POST & CFG_POST_WATCHDOG
+#if CONFIG_POST & CONFIG_SYS_POST_WATCHDOG
 
 #include <watchdog.h>
 
@@ -65,4 +65,4 @@ int watchdog_post_test (int flags)
 	}
 }
 
-#endif /* CONFIG_POST & CFG_POST_WATCHDOG */
+#endif /* CONFIG_POST & CONFIG_SYS_POST_WATCHDOG */
diff --git a/post/drivers/i2c.c b/post/drivers/i2c.c
index f54fe9970..b152deaf6 100644
--- a/post/drivers/i2c.c
+++ b/post/drivers/i2c.c
@@ -39,7 +39,7 @@
 #include <post.h>
 #include <i2c.h>
 
-#if CONFIG_POST & CFG_POST_I2C
+#if CONFIG_POST & CONFIG_SYS_POST_I2C
 
 int i2c_post_test (int flags)
 {
@@ -88,4 +88,4 @@ int i2c_post_test (int flags)
 #endif
 }
 
-#endif /* CONFIG_POST & CFG_POST_I2C */
+#endif /* CONFIG_POST & CONFIG_SYS_POST_I2C */
diff --git a/post/drivers/memory.c b/post/drivers/memory.c
index e32020f82..006236009 100644
--- a/post/drivers/memory.c
+++ b/post/drivers/memory.c
@@ -153,7 +153,7 @@
 #include <post.h>
 #include <watchdog.h>
 
-#if CONFIG_POST & CFG_POST_MEMORY
+#if CONFIG_POST & CONFIG_SYS_POST_MEMORY
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -460,11 +460,11 @@ int memory_post_test (int flags)
 				 256 << 20 : bd->bi_memsize) - (1 << 20);
 
 	/* Limit area to be tested with the board info struct */
-	if (CFG_SDRAM_BASE + memsize > (ulong)bd)
-		memsize = (ulong)bd - CFG_SDRAM_BASE;
+	if (CONFIG_SYS_SDRAM_BASE + memsize > (ulong)bd)
+		memsize = (ulong)bd - CONFIG_SYS_SDRAM_BASE;
 
 	if (flags & POST_SLOWTEST) {
-		ret = memory_post_tests (CFG_SDRAM_BASE, memsize);
+		ret = memory_post_tests (CONFIG_SYS_SDRAM_BASE, memsize);
 	} else {			/* POST_NORMAL */
 
 		unsigned long i;
@@ -480,4 +480,4 @@ int memory_post_test (int flags)
 	return ret;
 }
 
-#endif /* CONFIG_POST & CFG_POST_MEMORY */
+#endif /* CONFIG_POST & CONFIG_SYS_POST_MEMORY */
diff --git a/post/drivers/rtc.c b/post/drivers/rtc.c
index 66e526516..8b0f463b8 100644
--- a/post/drivers/rtc.c
+++ b/post/drivers/rtc.c
@@ -43,7 +43,7 @@
 #include <post.h>
 #include <rtc.h>
 
-#if CONFIG_POST & CFG_POST_RTC
+#if CONFIG_POST & CONFIG_SYS_POST_RTC
 
 static int rtc_post_skip (ulong * diff)
 {
@@ -192,4 +192,4 @@ int rtc_post_test (int flags)
 	return 0;
 }
 
-#endif /* CONFIG_POST & CFG_POST_RTC */
+#endif /* CONFIG_POST & CONFIG_SYS_POST_RTC */
diff --git a/post/lib_ppc/andi.c b/post/lib_ppc/andi.c
index 75ba7a66a..52ec7c4d4 100644
--- a/post/lib_ppc/andi.c
+++ b/post/lib_ppc/andi.c
@@ -35,7 +35,7 @@
 #include <post.h>
 #include "cpu_asm.h"
 
-#if CONFIG_POST & CFG_POST_CPU
+#if CONFIG_POST & CONFIG_SYS_POST_CPU
 
 extern void cpu_post_exec_21 (ulong *code, ulong *cr, ulong *res, ulong op);
 extern ulong cpu_post_makecr (long v);
diff --git a/post/lib_ppc/asm.S b/post/lib_ppc/asm.S
index 6220ed2bb..f6b329aa4 100644
--- a/post/lib_ppc/asm.S
+++ b/post/lib_ppc/asm.S
@@ -27,7 +27,7 @@
 #include <ppc_defs.h>
 #include <asm/cache.h>
 
-#if CONFIG_POST & CFG_POST_CPU
+#if CONFIG_POST & CONFIG_SYS_POST_CPU
 
 /* void cpu_post_exec_02 (ulong *code, ulong op1, ulong op2); */
 	.global	cpu_post_exec_02
diff --git a/post/lib_ppc/b.c b/post/lib_ppc/b.c
index 7a2583dc7..492fba4c5 100644
--- a/post/lib_ppc/b.c
+++ b/post/lib_ppc/b.c
@@ -40,7 +40,7 @@
 #include <post.h>
 #include "cpu_asm.h"
 
-#if CONFIG_POST & CFG_POST_CPU
+#if CONFIG_POST & CONFIG_SYS_POST_CPU
 
 extern void cpu_post_exec_11 (ulong *code, ulong *res, ulong op1);
 extern void cpu_post_exec_31 (ulong *code, ulong *ctr, ulong *lr, ulong *jump,
diff --git a/post/lib_ppc/cmp.c b/post/lib_ppc/cmp.c
index 13809d417..5f6a3b904 100644
--- a/post/lib_ppc/cmp.c
+++ b/post/lib_ppc/cmp.c
@@ -39,7 +39,7 @@
 #include <post.h>
 #include "cpu_asm.h"
 
-#if CONFIG_POST & CFG_POST_CPU
+#if CONFIG_POST & CONFIG_SYS_POST_CPU
 
 extern void cpu_post_exec_12 (ulong *code, ulong *res, ulong op1, ulong op2);
 
diff --git a/post/lib_ppc/cmpi.c b/post/lib_ppc/cmpi.c
index 5ecfe872a..1a2fc3d09 100644
--- a/post/lib_ppc/cmpi.c
+++ b/post/lib_ppc/cmpi.c
@@ -39,7 +39,7 @@
 #include <post.h>
 #include "cpu_asm.h"
 
-#if CONFIG_POST & CFG_POST_CPU
+#if CONFIG_POST & CONFIG_SYS_POST_CPU
 
 extern void cpu_post_exec_11 (ulong *code, ulong *res, ulong op1);
 
diff --git a/post/lib_ppc/complex.c b/post/lib_ppc/complex.c
index 4983c5191..4a3bc0003 100644
--- a/post/lib_ppc/complex.c
+++ b/post/lib_ppc/complex.c
@@ -34,7 +34,7 @@
 #include <post.h>
 #include "cpu_asm.h"
 
-#if CONFIG_POST & CFG_POST_CPU
+#if CONFIG_POST & CONFIG_SYS_POST_CPU
 
 extern int cpu_post_complex_1_asm (int a1, int a2, int a3, int a4, int n);
 extern int cpu_post_complex_2_asm (int x, int n);
diff --git a/post/lib_ppc/cpu.c b/post/lib_ppc/cpu.c
index 5c7f76191..3793a60c3 100644
--- a/post/lib_ppc/cpu.c
+++ b/post/lib_ppc/cpu.c
@@ -36,7 +36,7 @@
 #include <post.h>
 #include <asm/mmu.h>
 
-#if CONFIG_POST & CFG_POST_CPU
+#if CONFIG_POST & CONFIG_SYS_POST_CPU
 
 extern int cpu_post_test_cmp (void);
 extern int cpu_post_test_cmpi (void);
@@ -144,4 +144,4 @@ int cpu_post_test (int flags)
 	return ret;
 }
 
-#endif /* CONFIG_POST & CFG_POST_CPU */
+#endif /* CONFIG_POST & CONFIG_SYS_POST_CPU */
diff --git a/post/lib_ppc/cr.c b/post/lib_ppc/cr.c
index 2c7976ac3..fbee6d5c4 100644
--- a/post/lib_ppc/cr.c
+++ b/post/lib_ppc/cr.c
@@ -49,7 +49,7 @@
 #include <post.h>
 #include "cpu_asm.h"
 
-#if CONFIG_POST & CFG_POST_CPU
+#if CONFIG_POST & CONFIG_SYS_POST_CPU
 
 extern void cpu_post_exec_11 (ulong *code, ulong *res, ulong op1);
 extern void cpu_post_exec_21x (ulong *code, ulong *op1, ulong *op2, ulong op3);
diff --git a/post/lib_ppc/fpu/20001122-1.c b/post/lib_ppc/fpu/20001122-1.c
index dece61483..a8537fa6a 100644
--- a/post/lib_ppc/fpu/20001122-1.c
+++ b/post/lib_ppc/fpu/20001122-1.c
@@ -28,7 +28,7 @@
 
 #include <post.h>
 
-#if CONFIG_POST & CFG_POST_FPU
+#if CONFIG_POST & CONFIG_SYS_POST_FPU
 
 int fpu_post_test_math1 (void)
 {
@@ -56,4 +56,4 @@ int fpu_post_test_math1 (void)
 	return 0;
 }
 
-#endif /* CONFIG_POST & CFG_POST_FPU */
+#endif /* CONFIG_POST & CONFIG_SYS_POST_FPU */
diff --git a/post/lib_ppc/fpu/20010114-2.c b/post/lib_ppc/fpu/20010114-2.c
index 8a172174c..91e3631d0 100644
--- a/post/lib_ppc/fpu/20010114-2.c
+++ b/post/lib_ppc/fpu/20010114-2.c
@@ -28,7 +28,7 @@
 
 #include <post.h>
 
-#if CONFIG_POST & CFG_POST_FPU
+#if CONFIG_POST & CONFIG_SYS_POST_FPU
 
 static float rintf (float x)
 {
@@ -60,4 +60,4 @@ int fpu_post_test_math2 (void)
 	return 0;
 }
 
-#endif /* CONFIG_POST & CFG_POST_FPU */
+#endif /* CONFIG_POST & CONFIG_SYS_POST_FPU */
diff --git a/post/lib_ppc/fpu/20010226-1.c b/post/lib_ppc/fpu/20010226-1.c
index f366252e6..b00386b18 100644
--- a/post/lib_ppc/fpu/20010226-1.c
+++ b/post/lib_ppc/fpu/20010226-1.c
@@ -28,7 +28,7 @@
 
 #include <post.h>
 
-#if CONFIG_POST & CFG_POST_FPU
+#if CONFIG_POST & CONFIG_SYS_POST_FPU
 
 int fpu_post_test_math3 (void)
 {
@@ -48,4 +48,4 @@ int fpu_post_test_math3 (void)
 	return 0;
 }
 
-#endif /* CONFIG_POST & CFG_POST_FPU */
+#endif /* CONFIG_POST & CONFIG_SYS_POST_FPU */
diff --git a/post/lib_ppc/fpu/980619-1.c b/post/lib_ppc/fpu/980619-1.c
index 7f26482a5..ceb2b76bf 100644
--- a/post/lib_ppc/fpu/980619-1.c
+++ b/post/lib_ppc/fpu/980619-1.c
@@ -28,7 +28,7 @@
 
 #include <post.h>
 
-#if CONFIG_POST & CFG_POST_FPU
+#if CONFIG_POST & CONFIG_SYS_POST_FPU
 
 int fpu_post_test_math4 (void)
 {
@@ -54,4 +54,4 @@ int fpu_post_test_math4 (void)
 	return 0;
 }
 
-#endif /* CONFIG_POST & CFG_POST_FPU */
+#endif /* CONFIG_POST & CONFIG_SYS_POST_FPU */
diff --git a/post/lib_ppc/fpu/acc1.c b/post/lib_ppc/fpu/acc1.c
index 921282e8b..8a6519383 100644
--- a/post/lib_ppc/fpu/acc1.c
+++ b/post/lib_ppc/fpu/acc1.c
@@ -28,7 +28,7 @@
 
 #include <post.h>
 
-#if CONFIG_POST & CFG_POST_FPU
+#if CONFIG_POST & CONFIG_SYS_POST_FPU
 
 static double func (const double *array)
 {
@@ -51,4 +51,4 @@ int fpu_post_test_math5 (void)
 	return 0;
 }
 
-#endif /* CONFIG_POST & CFG_POST_FPU */
+#endif /* CONFIG_POST & CONFIG_SYS_POST_FPU */
diff --git a/post/lib_ppc/fpu/compare-fp-1.c b/post/lib_ppc/fpu/compare-fp-1.c
index be8f6208a..ab476579e 100644
--- a/post/lib_ppc/fpu/compare-fp-1.c
+++ b/post/lib_ppc/fpu/compare-fp-1.c
@@ -30,7 +30,7 @@
 
 #include <post.h>
 
-#if CONFIG_POST & CFG_POST_FPU
+#if CONFIG_POST & CONFIG_SYS_POST_FPU
 
 static int failed;
 
@@ -219,4 +219,4 @@ int fpu_post_test_math6 (void)
 	return 0;
 }
 
-#endif /* CONFIG_POST & CFG_POST_FPU */
+#endif /* CONFIG_POST & CONFIG_SYS_POST_FPU */
diff --git a/post/lib_ppc/fpu/fpu.c b/post/lib_ppc/fpu/fpu.c
index 9ddb67a21..846b76d87 100644
--- a/post/lib_ppc/fpu/fpu.c
+++ b/post/lib_ppc/fpu/fpu.c
@@ -36,7 +36,7 @@
 
 #include <post.h>
 
-#if CONFIG_POST & CFG_POST_FPU
+#if CONFIG_POST & CONFIG_SYS_POST_FPU
 
 #include <watchdog.h>
 
@@ -86,4 +86,4 @@ int fpu_post_test (int flags)
 	return ret;
 }
 
-#endif /* CONFIG_POST & CFG_POST_FPU */
+#endif /* CONFIG_POST & CONFIG_SYS_POST_FPU */
diff --git a/post/lib_ppc/fpu/mul-subnormal-single-1.c b/post/lib_ppc/fpu/mul-subnormal-single-1.c
index 7e6fe87b0..9c514e116 100644
--- a/post/lib_ppc/fpu/mul-subnormal-single-1.c
+++ b/post/lib_ppc/fpu/mul-subnormal-single-1.c
@@ -30,7 +30,7 @@
 
 #include <post.h>
 
-#if CONFIG_POST & CFG_POST_FPU
+#if CONFIG_POST & CONFIG_SYS_POST_FPU
 
 union uf
 {
@@ -97,4 +97,4 @@ int fpu_post_test_math7 (void)
 	return 0;
 }
 
-#endif /* CONFIG_POST & CFG_POST_FPU */
+#endif /* CONFIG_POST & CONFIG_SYS_POST_FPU */
diff --git a/post/lib_ppc/load.c b/post/lib_ppc/load.c
index eccebb7ca..98d437318 100644
--- a/post/lib_ppc/load.c
+++ b/post/lib_ppc/load.c
@@ -44,7 +44,7 @@
 #include <post.h>
 #include "cpu_asm.h"
 
-#if CONFIG_POST & CFG_POST_CPU
+#if CONFIG_POST & CONFIG_SYS_POST_CPU
 
 extern void cpu_post_exec_22w (ulong *code, ulong *op1, ulong op2, ulong *op3);
 extern void cpu_post_exec_21w (ulong *code, ulong *op1, ulong *op2);
diff --git a/post/lib_ppc/multi.c b/post/lib_ppc/multi.c
index 47135abd4..e42a7c07e 100644
--- a/post/lib_ppc/multi.c
+++ b/post/lib_ppc/multi.c
@@ -36,7 +36,7 @@
 #include <post.h>
 #include "cpu_asm.h"
 
-#if CONFIG_POST & CFG_POST_CPU
+#if CONFIG_POST & CONFIG_SYS_POST_CPU
 
 extern void cpu_post_exec_02 (ulong *code, ulong op1, ulong op2);
 
diff --git a/post/lib_ppc/rlwimi.c b/post/lib_ppc/rlwimi.c
index 8662db16c..fd628b31f 100644
--- a/post/lib_ppc/rlwimi.c
+++ b/post/lib_ppc/rlwimi.c
@@ -35,7 +35,7 @@
 #include <post.h>
 #include "cpu_asm.h"
 
-#if CONFIG_POST & CFG_POST_CPU
+#if CONFIG_POST & CONFIG_SYS_POST_CPU
 
 extern void cpu_post_exec_22 (ulong *code, ulong *cr, ulong *res, ulong op1,
     ulong op2);
diff --git a/post/lib_ppc/rlwinm.c b/post/lib_ppc/rlwinm.c
index 4398a101a..88a28c643 100644
--- a/post/lib_ppc/rlwinm.c
+++ b/post/lib_ppc/rlwinm.c
@@ -35,7 +35,7 @@
 #include <post.h>
 #include "cpu_asm.h"
 
-#if CONFIG_POST & CFG_POST_CPU
+#if CONFIG_POST & CONFIG_SYS_POST_CPU
 
 extern void cpu_post_exec_21 (ulong *code, ulong *cr, ulong *res, ulong op1);
 extern ulong cpu_post_makecr (long v);
diff --git a/post/lib_ppc/rlwnm.c b/post/lib_ppc/rlwnm.c
index c547bd779..60bcb6d26 100644
--- a/post/lib_ppc/rlwnm.c
+++ b/post/lib_ppc/rlwnm.c
@@ -35,7 +35,7 @@
 #include <post.h>
 #include "cpu_asm.h"
 
-#if CONFIG_POST & CFG_POST_CPU
+#if CONFIG_POST & CONFIG_SYS_POST_CPU
 
 extern void cpu_post_exec_22 (ulong *code, ulong *cr, ulong *res, ulong op1,
     ulong op2);
diff --git a/post/lib_ppc/srawi.c b/post/lib_ppc/srawi.c
index 4a3dddb92..be153aded 100644
--- a/post/lib_ppc/srawi.c
+++ b/post/lib_ppc/srawi.c
@@ -35,7 +35,7 @@
 #include <post.h>
 #include "cpu_asm.h"
 
-#if CONFIG_POST & CFG_POST_CPU
+#if CONFIG_POST & CONFIG_SYS_POST_CPU
 
 extern void cpu_post_exec_21 (ulong *code, ulong *cr, ulong *res, ulong op);
 extern ulong cpu_post_makecr (long v);
diff --git a/post/lib_ppc/store.c b/post/lib_ppc/store.c
index c96f263e3..1956f6baa 100644
--- a/post/lib_ppc/store.c
+++ b/post/lib_ppc/store.c
@@ -44,7 +44,7 @@
 #include <post.h>
 #include "cpu_asm.h"
 
-#if CONFIG_POST & CFG_POST_CPU
+#if CONFIG_POST & CONFIG_SYS_POST_CPU
 
 extern void cpu_post_exec_12w (ulong *code, ulong *op1, ulong op2, ulong op3);
 extern void cpu_post_exec_11w (ulong *code, ulong *op1, ulong op2);
diff --git a/post/lib_ppc/string.c b/post/lib_ppc/string.c
index 3683ac995..c0ddeaf65 100644
--- a/post/lib_ppc/string.c
+++ b/post/lib_ppc/string.c
@@ -36,7 +36,7 @@
 #include <post.h>
 #include "cpu_asm.h"
 
-#if CONFIG_POST & CFG_POST_CPU
+#if CONFIG_POST & CONFIG_SYS_POST_CPU
 
 extern void cpu_post_exec_02 (ulong *code, ulong op1, ulong op2);
 extern void cpu_post_exec_04 (ulong *code, ulong op1, ulong op2, ulong op3,
diff --git a/post/lib_ppc/three.c b/post/lib_ppc/three.c
index 3fa513b91..7f8c1e2b8 100644
--- a/post/lib_ppc/three.c
+++ b/post/lib_ppc/three.c
@@ -38,7 +38,7 @@
 #include <post.h>
 #include "cpu_asm.h"
 
-#if CONFIG_POST & CFG_POST_CPU
+#if CONFIG_POST & CONFIG_SYS_POST_CPU
 
 extern void cpu_post_exec_22 (ulong *code, ulong *cr, ulong *res, ulong op1,
     ulong op2);
diff --git a/post/lib_ppc/threei.c b/post/lib_ppc/threei.c
index 89f8fc846..31953f935 100644
--- a/post/lib_ppc/threei.c
+++ b/post/lib_ppc/threei.c
@@ -37,7 +37,7 @@
 #include <post.h>
 #include "cpu_asm.h"
 
-#if CONFIG_POST & CFG_POST_CPU
+#if CONFIG_POST & CONFIG_SYS_POST_CPU
 
 extern void cpu_post_exec_21 (ulong *code, ulong *cr, ulong *res, ulong op);
 extern ulong cpu_post_makecr (long v);
diff --git a/post/lib_ppc/threex.c b/post/lib_ppc/threex.c
index 1dfcc2ce0..350a12ae7 100644
--- a/post/lib_ppc/threex.c
+++ b/post/lib_ppc/threex.c
@@ -38,7 +38,7 @@
 #include <post.h>
 #include "cpu_asm.h"
 
-#if CONFIG_POST & CFG_POST_CPU
+#if CONFIG_POST & CONFIG_SYS_POST_CPU
 
 extern void cpu_post_exec_22 (ulong *code, ulong *cr, ulong *res, ulong op1,
     ulong op2);
diff --git a/post/lib_ppc/two.c b/post/lib_ppc/two.c
index 3d6b3c016..2b111472b 100644
--- a/post/lib_ppc/two.c
+++ b/post/lib_ppc/two.c
@@ -38,7 +38,7 @@
 #include <post.h>
 #include "cpu_asm.h"
 
-#if CONFIG_POST & CFG_POST_CPU
+#if CONFIG_POST & CONFIG_SYS_POST_CPU
 
 extern void cpu_post_exec_21 (ulong *code, ulong *cr, ulong *res, ulong op1);
 extern ulong cpu_post_makecr (long v);
diff --git a/post/lib_ppc/twox.c b/post/lib_ppc/twox.c
index 519b43200..d6714f986 100644
--- a/post/lib_ppc/twox.c
+++ b/post/lib_ppc/twox.c
@@ -38,7 +38,7 @@
 #include <post.h>
 #include "cpu_asm.h"
 
-#if CONFIG_POST & CFG_POST_CPU
+#if CONFIG_POST & CONFIG_SYS_POST_CPU
 
 extern void cpu_post_exec_21 (ulong *code, ulong *cr, ulong *res, ulong op1);
 extern ulong cpu_post_makecr (long v);
diff --git a/post/post.c b/post/post.c
index 99dc8c9a7..c982e27ff 100644
--- a/post/post.c
+++ b/post/post.c
@@ -372,7 +372,7 @@ int post_log (char *format, ...)
 {
 	va_list args;
 	uint i;
-	char printbuffer[CFG_PBSIZE];
+	char printbuffer[CONFIG_SYS_PBSIZE];
 
 	va_start (args, format);
 
@@ -448,7 +448,7 @@ void post_reloc (void)
 unsigned long post_time_ms (unsigned long base)
 {
 #ifdef CONFIG_PPC
-	return (unsigned long)(get_ticks () / (get_tbclk () / CFG_HZ)) - base;
+	return (unsigned long)(get_ticks () / (get_tbclk () / CONFIG_SYS_HZ)) - base;
 #else
 #warning "Not implemented yet"
 	return 0; /* Not implemented yet */
diff --git a/post/tests.c b/post/tests.c
index e88d92ed7..3224f009a 100644
--- a/post/tests.c
+++ b/post/tests.c
@@ -21,7 +21,7 @@
  * MA 02111-1307 USA
  *
  * Be sure to mark tests to be run before relocation as such with the
- * CFG_POST_PREREL flag so that logging is done correctly if the
+ * CONFIG_SYS_POST_PREREL flag so that logging is done correctly if the
  * logbuffer support is enabled.
  */
 
@@ -61,7 +61,7 @@ extern void sysmon_reloc (void);
 
 struct post_test post_list[] =
 {
-#if CONFIG_POST & CFG_POST_OCM
+#if CONFIG_POST & CONFIG_SYS_POST_OCM
     {
 	"OCM test",
 	"ocm",
@@ -70,10 +70,10 @@ struct post_test post_list[] =
 	&ocm_post_test,
 	NULL,
 	NULL,
-	CFG_POST_OCM
+	CONFIG_SYS_POST_OCM
     },
 #endif
-#if CONFIG_POST & CFG_POST_CACHE
+#if CONFIG_POST & CONFIG_SYS_POST_CACHE
     {
 	"Cache test",
 	"cache",
@@ -82,10 +82,10 @@ struct post_test post_list[] =
 	&cache_post_test,
 	NULL,
 	NULL,
-	CFG_POST_CACHE
+	CONFIG_SYS_POST_CACHE
     },
 #endif
-#if CONFIG_POST & CFG_POST_WATCHDOG
+#if CONFIG_POST & CONFIG_SYS_POST_WATCHDOG
 #if defined(CONFIG_POST_WATCHDOG)
 	CONFIG_POST_WATCHDOG,
 #else
@@ -97,11 +97,11 @@ struct post_test post_list[] =
 	&watchdog_post_test,
 	NULL,
 	NULL,
-	CFG_POST_WATCHDOG
+	CONFIG_SYS_POST_WATCHDOG
     },
 #endif
 #endif
-#if CONFIG_POST & CFG_POST_I2C
+#if CONFIG_POST & CONFIG_SYS_POST_I2C
     {
 	"I2C test",
 	"i2c",
@@ -110,10 +110,10 @@ struct post_test post_list[] =
 	&i2c_post_test,
 	NULL,
 	NULL,
-	CFG_POST_I2C
+	CONFIG_SYS_POST_I2C
     },
 #endif
-#if CONFIG_POST & CFG_POST_RTC
+#if CONFIG_POST & CONFIG_SYS_POST_RTC
     {
 	"RTC test",
 	"rtc",
@@ -122,10 +122,10 @@ struct post_test post_list[] =
 	&rtc_post_test,
 	NULL,
 	NULL,
-	CFG_POST_RTC
+	CONFIG_SYS_POST_RTC
     },
 #endif
-#if CONFIG_POST & CFG_POST_MEMORY
+#if CONFIG_POST & CONFIG_SYS_POST_MEMORY
     {
 	"Memory test",
 	"memory",
@@ -134,10 +134,10 @@ struct post_test post_list[] =
 	&memory_post_test,
 	NULL,
 	NULL,
-	CFG_POST_MEMORY
+	CONFIG_SYS_POST_MEMORY
     },
 #endif
-#if CONFIG_POST & CFG_POST_CPU
+#if CONFIG_POST & CONFIG_SYS_POST_CPU
     {
 	"CPU test",
 	"cpu",
@@ -147,10 +147,10 @@ struct post_test post_list[] =
 	&cpu_post_test,
 	NULL,
 	NULL,
-	CFG_POST_CPU
+	CONFIG_SYS_POST_CPU
     },
 #endif
-#if CONFIG_POST & CFG_POST_FPU
+#if CONFIG_POST & CONFIG_SYS_POST_FPU
     {
 	"FPU test",
 	"fpu",
@@ -160,10 +160,10 @@ struct post_test post_list[] =
 	&fpu_post_test,
 	NULL,
 	NULL,
-	CFG_POST_FPU
+	CONFIG_SYS_POST_FPU
     },
 #endif
-#if CONFIG_POST & CFG_POST_UART
+#if CONFIG_POST & CONFIG_SYS_POST_UART
     {
 	"UART test",
 	"uart",
@@ -172,10 +172,10 @@ struct post_test post_list[] =
 	&uart_post_test,
 	NULL,
 	NULL,
-	CFG_POST_UART
+	CONFIG_SYS_POST_UART
     },
 #endif
-#if CONFIG_POST & CFG_POST_ETHER
+#if CONFIG_POST & CONFIG_SYS_POST_ETHER
     {
 	"ETHERNET test",
 	"ethernet",
@@ -184,10 +184,10 @@ struct post_test post_list[] =
 	&ether_post_test,
 	NULL,
 	NULL,
-	CFG_POST_ETHER
+	CONFIG_SYS_POST_ETHER
     },
 #endif
-#if CONFIG_POST & CFG_POST_SPI
+#if CONFIG_POST & CONFIG_SYS_POST_SPI
     {
 	"SPI test",
 	"spi",
@@ -196,10 +196,10 @@ struct post_test post_list[] =
 	&spi_post_test,
 	NULL,
 	NULL,
-	CFG_POST_SPI
+	CONFIG_SYS_POST_SPI
     },
 #endif
-#if CONFIG_POST & CFG_POST_USB
+#if CONFIG_POST & CONFIG_SYS_POST_USB
     {
 	"USB test",
 	"usb",
@@ -208,10 +208,10 @@ struct post_test post_list[] =
 	&usb_post_test,
 	NULL,
 	NULL,
-	CFG_POST_USB
+	CONFIG_SYS_POST_USB
     },
 #endif
-#if CONFIG_POST & CFG_POST_SPR
+#if CONFIG_POST & CONFIG_SYS_POST_SPR
     {
 	"SPR test",
 	"spr",
@@ -220,10 +220,10 @@ struct post_test post_list[] =
 	&spr_post_test,
 	NULL,
 	NULL,
-	CFG_POST_SPR
+	CONFIG_SYS_POST_SPR
     },
 #endif
-#if CONFIG_POST & CFG_POST_SYSMON
+#if CONFIG_POST & CONFIG_SYS_POST_SYSMON
     {
 	"SYSMON test",
 	"sysmon",
@@ -232,10 +232,10 @@ struct post_test post_list[] =
 	&sysmon_post_test,
 	&sysmon_init_f,
 	&sysmon_reloc,
-	CFG_POST_SYSMON
+	CONFIG_SYS_POST_SYSMON
     },
 #endif
-#if CONFIG_POST & CFG_POST_DSP
+#if CONFIG_POST & CONFIG_SYS_POST_DSP
     {
 	"DSP test",
 	"dsp",
@@ -244,10 +244,10 @@ struct post_test post_list[] =
 	&dsp_post_test,
 	NULL,
 	NULL,
-	CFG_POST_DSP
+	CONFIG_SYS_POST_DSP
     },
 #endif
-#if CONFIG_POST & CFG_POST_CODEC
+#if CONFIG_POST & CONFIG_SYS_POST_CODEC
     {
 	"CODEC test",
 	"codec",
@@ -256,10 +256,10 @@ struct post_test post_list[] =
 	&codec_post_test,
 	NULL,
 	NULL,
-	CFG_POST_CODEC
+	CONFIG_SYS_POST_CODEC
     },
 #endif
-#if CONFIG_POST & CFG_POST_ECC
+#if CONFIG_POST & CONFIG_SYS_POST_ECC
     {
 	"ECC test",
 	"ecc",
@@ -268,22 +268,22 @@ struct post_test post_list[] =
 	&ecc_post_test,
 	NULL,
 	NULL,
-	CFG_POST_ECC
+	CONFIG_SYS_POST_ECC
     },
 #endif
-#if CONFIG_POST & CFG_POST_BSPEC1
+#if CONFIG_POST & CONFIG_SYS_POST_BSPEC1
 	CONFIG_POST_BSPEC1,
 #endif
-#if CONFIG_POST & CFG_POST_BSPEC2
+#if CONFIG_POST & CONFIG_SYS_POST_BSPEC2
 	CONFIG_POST_BSPEC2,
 #endif
-#if CONFIG_POST & CFG_POST_BSPEC3
+#if CONFIG_POST & CONFIG_SYS_POST_BSPEC3
 	CONFIG_POST_BSPEC3,
 #endif
-#if CONFIG_POST & CFG_POST_BSPEC4
+#if CONFIG_POST & CONFIG_SYS_POST_BSPEC4
 	CONFIG_POST_BSPEC4,
 #endif
-#if CONFIG_POST & CFG_POST_BSPEC5
+#if CONFIG_POST & CONFIG_SYS_POST_BSPEC5
 	CONFIG_POST_BSPEC5,
 #endif
 };
diff --git a/ppc_config.mk b/ppc_config.mk
index 31993bd91..c95b3b12e 100644
--- a/ppc_config.mk
+++ b/ppc_config.mk
@@ -23,3 +23,17 @@
 
 PLATFORM_CPPFLAGS += -DCONFIG_PPC -D__powerpc__
 PLATFORM_LDFLAGS  += -n
+
+#
+# When cross-compiling on NetBSD, we have to define __PPC__ or else we
+# will pick up a va_list declaration that is incompatible with the
+# actual argument lists emitted by the compiler.
+#
+# [Tested on NetBSD/i386 1.5 + cross-powerpc-netbsd-1.3]
+
+ifeq ($(CROSS_COMPILE),powerpc-netbsd-)
+PLATFORM_CPPFLAGS+= -D__PPC__
+endif
+ifeq ($(CROSS_COMPILE),powerpc-openbsd-)
+PLATFORM_CPPFLAGS+= -D__PPC__
+endif
diff --git a/tools/.gitignore b/tools/.gitignore
index 157b6790e..377ca9aaa 100644
--- a/tools/.gitignore
+++ b/tools/.gitignore
@@ -1,7 +1,7 @@
 /bmp_logo
 /crc32.c
 /envcrc
-/environment.c
+/env_embedded.c
 /gen_eth_addr
 /img2srec
 /md5.c
diff --git a/tools/Makefile b/tools/Makefile
index 21ea1c204..9e9ee15fb 100644
--- a/tools/Makefile
+++ b/tools/Makefile
@@ -23,7 +23,7 @@
 
 BIN_FILES	= img2srec$(SFX) mkimage$(SFX) envcrc$(SFX) ubsha1$(SFX) gen_eth_addr$(SFX) bmp_logo$(SFX)
 
-OBJ_LINKS	= environment.o crc32.o md5.o sha1.o image.o
+OBJ_LINKS	= env_embedded.o crc32.o md5.o sha1.o image.o
 OBJ_FILES	= img2srec.o mkimage.o envcrc.o ubsha1.o gen_eth_addr.o bmp_logo.o
 
 ifeq ($(ARCH),mips)
@@ -137,7 +137,7 @@ MAKEDEPEND = makedepend
 
 all:	$(obj).depend $(BINS) $(LOGO_H) subdirs
 
-$(obj)envcrc$(SFX):	$(obj)envcrc.o $(obj)crc32.o $(obj)environment.o $(obj)sha1.o
+$(obj)envcrc$(SFX):	$(obj)envcrc.o $(obj)crc32.o $(obj)env_embedded.o $(obj)sha1.o
 		$(CC) $(CFLAGS) -o $@ $^
 
 $(obj)ubsha1$(SFX):	$(obj)ubsha1.o $(obj)sha1.o
@@ -237,11 +237,11 @@ else
 		done
 endif
 
-$(obj)environment.c:
-		@rm -f $(obj)environment.c
-		ln -s $(src)../common/environment.c $(obj)environment.c
+$(obj)env_embedded.c:
+		@rm -f $(obj)env_embedded.c
+		ln -s $(src)../common/env_embedded.c $(obj)env_embedded.c
 
-$(obj)environment.o:	$(obj)environment.c
+$(obj)env_embedded.o:	$(obj)env_embedded.c
 		$(CC) -g $(HOST_ENVIRO_CFLAGS) $(CPPFLAGS) -c -o $@ $<
 
 $(obj)zlib.h:
diff --git a/tools/env/README b/tools/env/README
index f8a644e0c..91e679a32 100644
--- a/tools/env/README
+++ b/tools/env/README
@@ -22,9 +22,11 @@ following lines are relevant:
 #define DEVICE1_OFFSET    0x0000
 #define ENV1_SIZE         0x4000
 #define DEVICE1_ESIZE     0x4000
+#define DEVICE1_ENVSECTORS     2
 #define DEVICE2_OFFSET    0x0000
 #define ENV2_SIZE         0x4000
 #define DEVICE2_ESIZE     0x4000
+#define DEVICE2_ENVSECTORS     2
 
 Current configuration matches the environment layout of the TRAB
 board.
@@ -46,3 +48,7 @@ then 1 sector.
 
 DEVICEx_ESIZE defines the size of the first sector in the flash
 partition where the environment resides.
+
+DEVICEx_ENVSECTORS defines the number of sectors that may be used for
+this environment instance. On NAND this is used to limit the range
+within which bad blocks are skipped, on NOR it is not used.
diff --git a/tools/env/fw_env.c b/tools/env/fw_env.c
index b8bca91c3..a46205d86 100644
--- a/tools/env/fw_env.c
+++ b/tools/env/fw_env.c
@@ -2,6 +2,9 @@
  * (C) Copyright 2000-2008
  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
  *
+ * (C) Copyright 2008
+ * Guennadi Liakhovetski, DENX Software Engineering, lg@denx.de.
+ *
  * See file CREDITS for list of people who contributed to this
  * project.
  *
@@ -33,6 +36,7 @@
 #include <unistd.h>
 
 #ifdef MTD_OLD
+# include <stdint.h>
 # include <linux/mtd/mtd.h>
 #else
 # define  __user	/* nothing */
@@ -44,36 +48,75 @@
 #define	CMD_GETENV	"fw_printenv"
 #define	CMD_SETENV	"fw_setenv"
 
-typedef struct envdev_s {
+#define min(x, y) ({				\
+	typeof(x) _min1 = (x);			\
+	typeof(y) _min2 = (y);			\
+	(void) (&_min1 == &_min2);		\
+	_min1 < _min2 ? _min1 : _min2; })
+
+struct envdev_s {
 	char devname[16];		/* Device name */
 	ulong devoff;			/* Device offset */
 	ulong env_size;			/* environment size */
 	ulong erase_size;		/* device erase size */
-} envdev_t;
+	ulong env_sectors;		/* number of environment sectors */
+	uint8_t mtd_type;		/* type of the MTD device */
+};
 
-static envdev_t envdevices[2];
-static int curdev;
+static struct envdev_s envdevices[2] =
+{
+	{
+		.mtd_type = MTD_ABSENT,
+	}, {
+		.mtd_type = MTD_ABSENT,
+	},
+};
+static int dev_current;
 
 #define DEVNAME(i)    envdevices[(i)].devname
 #define DEVOFFSET(i)  envdevices[(i)].devoff
 #define ENVSIZE(i)    envdevices[(i)].env_size
 #define DEVESIZE(i)   envdevices[(i)].erase_size
+#define ENVSECTORS(i) envdevices[(i)].env_sectors
+#define DEVTYPE(i)    envdevices[(i)].mtd_type
 
-#define CFG_ENV_SIZE ENVSIZE(curdev)
+#define CONFIG_ENV_SIZE ENVSIZE(dev_current)
 
 #define ENV_SIZE      getenvsize()
 
-typedef struct environment_s {
-	ulong crc;			/* CRC32 over data bytes    */
-	unsigned char flags;		/* active or obsolete */
-	char *data;
-} env_t;
+struct env_image_single {
+	uint32_t	crc;	/* CRC32 over data bytes    */
+	char		data[];
+};
 
-static env_t environment;
+struct env_image_redundant {
+	uint32_t	crc;	/* CRC32 over data bytes    */
+	unsigned char	flags;	/* active or obsolete */
+	char		data[];
+};
+
+enum flag_scheme {
+	FLAG_NONE,
+	FLAG_BOOLEAN,
+	FLAG_INCREMENTAL,
+};
+
+struct environment {
+	void			*image;
+	uint32_t		*crc;
+	unsigned char		*flags;
+	char			*data;
+	enum flag_scheme	flag_scheme;
+};
+
+static struct environment environment = {
+	.flag_scheme = FLAG_NONE,
+};
 
 static int HaveRedundEnv = 0;
 
 static unsigned char active_flag = 1;
+/* obsolete_flag must be 0 to efficiently set it on NOR flash without erasing */
 static unsigned char obsolete_flag = 0;
 
 
@@ -114,6 +157,12 @@ static char default_environment[] = {
 #ifdef	CONFIG_ETH3ADDR
 	"eth3addr=" MK_STR (CONFIG_ETH3ADDR) "\0"
 #endif
+#ifdef	CONFIG_ETH4ADDR
+	"eth4addr=" MK_STR (CONFIG_ETH4ADDR) "\0"
+#endif
+#ifdef	CONFIG_ETH5ADDR
+	"eth5addr=" MK_STR (CONFIG_ETH5ADDR) "\0"
+#endif
 #ifdef	CONFIG_ETHPRIME
 	"ethprime=" CONFIG_ETHPRIME "\0"
 #endif
@@ -123,8 +172,8 @@ static char default_environment[] = {
 #ifdef	CONFIG_SERVERIP
 	"serverip=" MK_STR (CONFIG_SERVERIP) "\0"
 #endif
-#ifdef	CFG_AUTOLOAD
-	"autoload=" CFG_AUTOLOAD "\0"
+#ifdef	CONFIG_SYS_AUTOLOAD
+	"autoload=" CONFIG_SYS_AUTOLOAD "\0"
 #endif
 #ifdef	CONFIG_ROOTPATH
 	"rootpath=" MK_STR (CONFIG_ROOTPATH) "\0"
@@ -156,7 +205,7 @@ static char default_environment[] = {
 #ifdef  CONFIG_EXTRA_ENV_SETTINGS
 	CONFIG_EXTRA_ENV_SETTINGS
 #endif
-	"\0"			/* Termimate env_t data with 2 NULs */
+	"\0"		/* Termimate struct environment data with 2 NULs */
 };
 
 static int flash_io (int mode);
@@ -169,7 +218,7 @@ static int get_config (char *);
 #endif
 static inline ulong getenvsize (void)
 {
-	ulong rc = CFG_ENV_SIZE - sizeof (long);
+	ulong rc = CONFIG_ENV_SIZE - sizeof (long);
 
 	if (HaveRedundEnv)
 		rc -= sizeof (char);
@@ -185,7 +234,7 @@ char *fw_getenv (char *name)
 	char *env, *nxt;
 
 	if (env_init ())
-		return (NULL);
+		return NULL;
 
 	for (env = environment.data; *env; env = nxt + 1) {
 		char *val;
@@ -194,15 +243,15 @@ char *fw_getenv (char *name)
 			if (nxt >= &environment.data[ENV_SIZE]) {
 				fprintf (stderr, "## Error: "
 					"environment not terminated\n");
-				return (NULL);
+				return NULL;
 			}
 		}
 		val = envmatch (name, env);
 		if (!val)
 			continue;
-		return (val);
+		return val;
 	}
-	return (NULL);
+	return NULL;
 }
 
 /*
@@ -216,7 +265,7 @@ int fw_printenv (int argc, char *argv[])
 	int rc = 0;
 
 	if (env_init ())
-		return (-1);
+		return -1;
 
 	if (argc == 1) {		/* Print all env variables  */
 		for (env = environment.data; *env; env = nxt + 1) {
@@ -224,13 +273,13 @@ int fw_printenv (int argc, char *argv[])
 				if (nxt >= &environment.data[ENV_SIZE]) {
 					fprintf (stderr, "## Error: "
 						"environment not terminated\n");
-					return (-1);
+					return -1;
 				}
 			}
 
 			printf ("%s\n", env);
 		}
-		return (0);
+		return 0;
 	}
 
 	if (strcmp (argv[1], "-n") == 0) {
@@ -240,7 +289,7 @@ int fw_printenv (int argc, char *argv[])
 		if (argc != 2) {
 			fprintf (stderr, "## Error: "
 				"`-n' option requires exactly one argument\n");
-			return (-1);
+			return -1;
 		}
 	} else {
 		n_flag = 0;
@@ -256,7 +305,7 @@ int fw_printenv (int argc, char *argv[])
 				if (nxt >= &environment.data[ENV_SIZE]) {
 					fprintf (stderr, "## Error: "
 						"environment not terminated\n");
-					return (-1);
+					return -1;
 				}
 			}
 			val = envmatch (name, env);
@@ -275,11 +324,11 @@ int fw_printenv (int argc, char *argv[])
 		}
 	}
 
-	return (rc);
+	return rc;
 }
 
 /*
- * Deletes or sets environment variables. Returns errno style error codes:
+ * Deletes or sets environment variables. Returns -1 and sets errno error codes:
  * 0	  - OK
  * EINVAL - need at least 1 argument
  * EROFS  - certain variables ("ethaddr", "serial#") cannot be
@@ -294,11 +343,12 @@ int fw_setenv (int argc, char *argv[])
 	char *name;
 
 	if (argc < 2) {
-		return (EINVAL);
+		errno = EINVAL;
+		return -1;
 	}
 
 	if (env_init ())
-		return (errno);
+		return -1;
 
 	name = argv[1];
 
@@ -310,7 +360,8 @@ int fw_setenv (int argc, char *argv[])
 			if (nxt >= &environment.data[ENV_SIZE]) {
 				fprintf (stderr, "## Error: "
 					"environment not terminated\n");
-				return (EINVAL);
+				errno = EINVAL;
+				return -1;
 			}
 		}
 		if ((oldval = envmatch (name, env)) != NULL)
@@ -327,7 +378,8 @@ int fw_setenv (int argc, char *argv[])
 		if ((strcmp (name, "ethaddr") == 0) ||
 			(strcmp (name, "serial#") == 0)) {
 			fprintf (stderr, "Can't overwrite \"%s\"\n", name);
-			return (EROFS);
+			errno = EROFS;
+			return -1;
 		}
 
 		if (*++nxt == '\0') {
@@ -355,7 +407,7 @@ int fw_setenv (int argc, char *argv[])
 		++env;
 	/*
 	 * Overflow when:
-	 * "name" + "=" + "val" +"\0\0"  > CFG_ENV_SIZE - (env-environment)
+	 * "name" + "=" + "val" +"\0\0"  > CONFIG_ENV_SIZE - (env-environment)
 	 */
 	len = strlen (name) + 2;
 	/* add '=' for first arg, ' ' for all others */
@@ -366,7 +418,7 @@ int fw_setenv (int argc, char *argv[])
 		fprintf (stderr,
 			"Error: environment overflow, \"%s\" deleted\n",
 			name);
-		return (-1);
+		return -1;
 	}
 	while ((*env = *name++) != '\0')
 		env++;
@@ -382,195 +434,430 @@ int fw_setenv (int argc, char *argv[])
 
   WRITE_FLASH:
 
-	/* Update CRC */
-	environment.crc = crc32 (0, (uint8_t*) environment.data, ENV_SIZE);
+	/*
+	 * Update CRC
+	 */
+	*environment.crc = crc32 (0, (uint8_t *) environment.data, ENV_SIZE);
 
 	/* write environment back to flash */
 	if (flash_io (O_RDWR)) {
 		fprintf (stderr, "Error: can't write fw_env to flash\n");
-		return (-1);
+		return -1;
 	}
 
-	return (0);
+	return 0;
 }
 
-static int flash_io (int mode)
+/*
+ * Test for bad block on NAND, just returns 0 on NOR, on NAND:
+ * 0	- block is good
+ * > 0	- block is bad
+ * < 0	- failed to test
+ */
+static int flash_bad_block (int fd, uint8_t mtd_type, loff_t *blockstart)
 {
-	int fd, fdr, rc, otherdev, len, resid;
-	erase_info_t erase;
-	char *data = NULL;
+	if (mtd_type == MTD_NANDFLASH) {
+		int badblock = ioctl (fd, MEMGETBADBLOCK, blockstart);
 
-	if ((fd = open (DEVNAME (curdev), mode)) < 0) {
-		fprintf (stderr,
-			"Can't open %s: %s\n",
-			DEVNAME (curdev), strerror (errno));
-		return (-1);
+		if (badblock < 0) {
+			perror ("Cannot read bad block mark");
+			return badblock;
+		}
+
+		if (badblock) {
+#ifdef DEBUG
+			fprintf (stderr, "Bad block at 0x%llx, "
+				 "skipping\n", *blockstart);
+#endif
+			return badblock;
+		}
 	}
 
-	len = sizeof (environment.crc);
-	if (HaveRedundEnv) {
-		len += sizeof (environment.flags);
+	return 0;
+}
+
+/*
+ * Read data from flash at an offset into a provided buffer. On NAND it skips
+ * bad blocks but makes sure it stays within ENVSECTORS (dev) starting from
+ * the DEVOFFSET (dev) block. On NOR the loop is only run once.
+ */
+static int flash_read_buf (int dev, int fd, void *buf, size_t count,
+			   off_t offset, uint8_t mtd_type)
+{
+	size_t blocklen;	/* erase / write length - one block on NAND,
+				   0 on NOR */
+	size_t processed = 0;	/* progress counter */
+	size_t readlen = count;	/* current read length */
+	off_t top_of_range;	/* end of the last block we may use */
+	off_t block_seek;	/* offset inside the current block to the start
+				   of the data */
+	loff_t blockstart;	/* running start of the current block -
+				   MEMGETBADBLOCK needs 64 bits */
+	int rc;
+
+	/*
+	 * Start of the first block to be read, relies on the fact, that
+	 * erase sector size is always a power of 2
+	 */
+	blockstart = offset & ~(DEVESIZE (dev) - 1);
+
+	/* Offset inside a block */
+	block_seek = offset - blockstart;
+
+	if (mtd_type == MTD_NANDFLASH) {
+		/*
+		 * NAND: calculate which blocks we are reading. We have
+		 * to read one block at a time to skip bad blocks.
+		 */
+		blocklen = DEVESIZE (dev);
+
+		/*
+		 * To calculate the top of the range, we have to use the
+		 * global DEVOFFSET (dev), which can be different from offset
+		 */
+		top_of_range = (DEVOFFSET (dev) & ~(blocklen - 1)) +
+			ENVSECTORS (dev) * blocklen;
+
+		/* Limit to one block for the first read */
+		if (readlen > blocklen - block_seek)
+			readlen = blocklen - block_seek;
+	} else {
+		blocklen = 0;
+		top_of_range = offset + count;
 	}
 
-	if (mode == O_RDWR) {
-		if (HaveRedundEnv) {
-			/* switch to next partition for writing */
-			otherdev = !curdev;
-			if ((fdr = open (DEVNAME (otherdev), mode)) < 0) {
-				fprintf (stderr,
-					"Can't open %s: %s\n",
-					DEVNAME (otherdev),
-					strerror (errno));
-				return (-1);
-			}
-		} else {
-			otherdev = curdev;
-			fdr = fd;
-		}
-		printf ("Unlocking flash...\n");
-		erase.length = DEVESIZE (otherdev);
-		erase.start = DEVOFFSET (otherdev);
-		ioctl (fdr, MEMUNLOCK, &erase);
+	/* This only runs once on NOR flash */
+	while (processed < count) {
+		rc = flash_bad_block (fd, mtd_type, &blockstart);
+		if (rc < 0)		/* block test failed */
+			return -1;
 
-		if (HaveRedundEnv) {
-			erase.length = DEVESIZE (curdev);
-			erase.start = DEVOFFSET (curdev);
-			ioctl (fd, MEMUNLOCK, &erase);
-			environment.flags = active_flag;
+		if (blockstart + block_seek + readlen > top_of_range) {
+			/* End of range is reached */
+			fprintf (stderr,
+				 "Too few good blocks within range\n");
+			return -1;
 		}
 
-		printf ("Done\n");
-		resid = DEVESIZE (otherdev) - CFG_ENV_SIZE;
-		if (resid) {
-			if ((data = malloc (resid)) == NULL) {
-				fprintf (stderr,
-					"Cannot malloc %d bytes: %s\n",
-					resid,
-					strerror (errno));
-				return (-1);
-			}
-			if (lseek (fdr, DEVOFFSET (otherdev) + CFG_ENV_SIZE, SEEK_SET)
-				== -1) {
-				fprintf (stderr, "seek error on %s: %s\n",
-					DEVNAME (otherdev),
-					strerror (errno));
-				return (-1);
-			}
-			if ((rc = read (fdr, data, resid)) != resid) {
-				fprintf (stderr,
-					"read error on %s: %s\n",
-					DEVNAME (otherdev),
-					strerror (errno));
-				return (-1);
-			}
+		if (rc) {		/* block is bad */
+			blockstart += blocklen;
+			continue;
 		}
 
-		printf ("Erasing old environment...\n");
+		/*
+		 * If a block is bad, we retry in the next block at the same
+		 * offset - see common/env_nand.c::writeenv()
+		 */
+		lseek (fd, blockstart + block_seek, SEEK_SET);
 
-		erase.length = DEVESIZE (otherdev);
-		erase.start = DEVOFFSET (otherdev);
-		if (ioctl (fdr, MEMERASE, &erase) != 0) {
-			fprintf (stderr, "MTD erase error on %s: %s\n",
-				DEVNAME (otherdev),
-				strerror (errno));
-			return (-1);
+		rc = read (fd, buf + processed, readlen);
+		if (rc != readlen) {
+			fprintf (stderr, "Read error on %s: %s\n",
+				 DEVNAME (dev), strerror (errno));
+			return -1;
 		}
+#ifdef DEBUG
+		fprintf (stderr, "Read 0x%x bytes at 0x%llx\n",
+			 rc, blockstart + block_seek);
+#endif
+		processed += readlen;
+		readlen = min (blocklen, count - processed);
+		block_seek = 0;
+		blockstart += blocklen;
+	}
+
+	return processed;
+}
+
+/*
+ * Write count bytes at offset, but stay within ENVSETCORS (dev) sectors of
+ * DEVOFFSET (dev). Similar to the read case above, on NOR we erase and write
+ * the whole data at once.
+ */
+static int flash_write_buf (int dev, int fd, void *buf, size_t count,
+			    off_t offset, uint8_t mtd_type)
+{
+	void *data;
+	struct erase_info_user erase;
+	size_t blocklen;	/* length of NAND block / NOR erase sector */
+	size_t erase_len;	/* whole area that can be erased - may include
+				   bad blocks */
+	size_t erasesize;	/* erase / write length - one block on NAND,
+				   whole area on NOR */
+	size_t processed = 0;	/* progress counter */
+	size_t write_total;	/* total size to actually write - excludinig
+				   bad blocks */
+	off_t erase_offset;	/* offset to the first erase block (aligned)
+				   below offset */
+	off_t block_seek;	/* offset inside the erase block to the start
+				   of the data */
+	off_t top_of_range;	/* end of the last block we may use */
+	loff_t blockstart;	/* running start of the current block -
+				   MEMGETBADBLOCK needs 64 bits */
+	int rc;
+
+	blocklen = DEVESIZE (dev);
+
+	/* Erase sector size is always a power of 2 */
+	top_of_range = (DEVOFFSET (dev) & ~(blocklen - 1)) +
+		ENVSECTORS (dev) * blocklen;
 
-		printf ("Done\n");
+	erase_offset = offset & ~(blocklen - 1);
 
-		printf ("Writing environment to %s...\n", DEVNAME (otherdev));
-		if (lseek (fdr, DEVOFFSET (otherdev), SEEK_SET) == -1) {
+	/* Maximum area we may use */
+	erase_len = top_of_range - erase_offset;
+
+	blockstart = erase_offset;
+	/* Offset inside a block */
+	block_seek = offset - erase_offset;
+
+	/*
+	 * Data size we actually have to write: from the start of the block
+	 * to the start of the data, then count bytes of data, and to the
+	 * end of the block
+	 */
+	write_total = (block_seek + count + blocklen - 1) & ~(blocklen - 1);
+
+	/*
+	 * Support data anywhere within erase sectors: read out the complete
+	 * area to be erased, replace the environment image, write the whole
+	 * block back again.
+	 */
+	if (write_total > count) {
+		data = malloc (erase_len);
+		if (!data) {
 			fprintf (stderr,
-				"seek error on %s: %s\n",
-				DEVNAME (otherdev), strerror (errno));
-			return (-1);
+				 "Cannot malloc %u bytes: %s\n",
+				 erase_len, strerror (errno));
+			return -1;
 		}
-		if (write (fdr, &environment, len) != len) {
-			fprintf (stderr,
-				"CRC write error on %s: %s\n",
-				DEVNAME (otherdev), strerror (errno));
-			return (-1);
+
+		rc = flash_read_buf (dev, fd, data, write_total, erase_offset,
+				     mtd_type);
+		if (write_total != rc)
+			return -1;
+
+		/* Overwrite the old environment */
+		memcpy (data + block_seek, buf, count);
+	} else {
+		/*
+		 * We get here, iff offset is block-aligned and count is a
+		 * multiple of blocklen - see write_total calculation above
+		 */
+		data = buf;
+	}
+
+	if (mtd_type == MTD_NANDFLASH) {
+		/*
+		 * NAND: calculate which blocks we are writing. We have
+		 * to write one block at a time to skip bad blocks.
+		 */
+		erasesize = blocklen;
+	} else {
+		erasesize = erase_len;
+	}
+
+	erase.length = erasesize;
+
+	/* This only runs once on NOR flash */
+	while (processed < write_total) {
+		rc = flash_bad_block (fd, mtd_type, &blockstart);
+		if (rc < 0)		/* block test failed */
+			return rc;
+
+		if (blockstart + erasesize > top_of_range) {
+			fprintf (stderr, "End of range reached, aborting\n");
+			return -1;
 		}
-		if (write (fdr, environment.data, ENV_SIZE) != ENV_SIZE) {
+
+		if (rc) {		/* block is bad */
+			blockstart += blocklen;
+			continue;
+		}
+
+		erase.start = blockstart;
+		ioctl (fd, MEMUNLOCK, &erase);
+
+		if (ioctl (fd, MEMERASE, &erase) != 0) {
+			fprintf (stderr, "MTD erase error on %s: %s\n",
+				 DEVNAME (dev),
+				 strerror (errno));
+			return -1;
+		}
+
+		if (lseek (fd, blockstart, SEEK_SET) == -1) {
 			fprintf (stderr,
-				"Write error on %s: %s\n",
-				DEVNAME (otherdev), strerror (errno));
-			return (-1);
+				 "Seek error on %s: %s\n",
+				 DEVNAME (dev), strerror (errno));
+			return -1;
 		}
-		if (resid) {
-			if (write (fdr, data, resid) != resid) {
-				fprintf (stderr,
-					"write error on %s: %s\n",
-					DEVNAME (curdev), strerror (errno));
-				return (-1);
-			}
-			free (data);
+
+#ifdef DEBUG
+		printf ("Write 0x%x bytes at 0x%llx\n", erasesize, blockstart);
+#endif
+		if (write (fd, data + processed, erasesize) != erasesize) {
+			fprintf (stderr, "Write error on %s: %s\n",
+				 DEVNAME (dev), strerror (errno));
+			return -1;
 		}
+
+		ioctl (fd, MEMLOCK, &erase);
+
+		processed  += blocklen;
+		block_seek = 0;
+		blockstart += blocklen;
+	}
+
+	if (write_total > count)
+		free (data);
+
+	return processed;
+}
+
+/*
+ * Set obsolete flag at offset - NOR flash only
+ */
+static int flash_flag_obsolete (int dev, int fd, off_t offset)
+{
+	int rc;
+
+	/* This relies on the fact, that obsolete_flag == 0 */
+	rc = lseek (fd, offset, SEEK_SET);
+	if (rc < 0) {
+		fprintf (stderr, "Cannot seek to set the flag on %s \n",
+			 DEVNAME (dev));
+		return rc;
+	}
+	rc = write (fd, &obsolete_flag, sizeof (obsolete_flag));
+	if (rc < 0)
+		perror ("Could not set obsolete flag");
+
+	return rc;
+}
+
+static int flash_write (int fd_current, int fd_target, int dev_target)
+{
+	int rc;
+
+	switch (environment.flag_scheme) {
+	case FLAG_NONE:
+		break;
+	case FLAG_INCREMENTAL:
+		(*environment.flags)++;
+		break;
+	case FLAG_BOOLEAN:
+		*environment.flags = active_flag;
+		break;
+	default:
+		fprintf (stderr, "Unimplemented flash scheme %u \n",
+			 environment.flag_scheme);
+		return -1;
+	}
+
+#ifdef DEBUG
+	printf ("Writing new environment at 0x%lx on %s\n",
+		DEVOFFSET (dev_target), DEVNAME (dev_target));
+#endif
+	rc = flash_write_buf (dev_target, fd_target, environment.image,
+			      CONFIG_ENV_SIZE, DEVOFFSET (dev_target),
+			      DEVTYPE(dev_target));
+	if (rc < 0)
+		return rc;
+
+	if (environment.flag_scheme == FLAG_BOOLEAN) {
+		/* Have to set obsolete flag */
+		off_t offset = DEVOFFSET (dev_current) +
+			offsetof (struct env_image_redundant, flags);
+#ifdef DEBUG
+		printf ("Setting obsolete flag in environment at 0x%lx on %s\n",
+			DEVOFFSET (dev_current), DEVNAME (dev_current));
+#endif
+		flash_flag_obsolete (dev_current, fd_current, offset);
+	}
+
+	return 0;
+}
+
+static int flash_read (int fd)
+{
+	struct mtd_info_user mtdinfo;
+	int rc;
+
+	rc = ioctl (fd, MEMGETINFO, &mtdinfo);
+	if (rc < 0) {
+		perror ("Cannot get MTD information");
+		return -1;
+	}
+
+	if (mtdinfo.type != MTD_NORFLASH && mtdinfo.type != MTD_NANDFLASH) {
+		fprintf (stderr, "Unsupported flash type %u\n", mtdinfo.type);
+		return -1;
+	}
+
+	DEVTYPE(dev_current) = mtdinfo.type;
+
+	rc = flash_read_buf (dev_current, fd, environment.image, CONFIG_ENV_SIZE,
+			     DEVOFFSET (dev_current), mtdinfo.type);
+
+	return (rc != CONFIG_ENV_SIZE) ? -1 : 0;
+}
+
+static int flash_io (int mode)
+{
+	int fd_current, fd_target, rc, dev_target;
+
+	/* dev_current: fd_current, erase_current */
+	fd_current = open (DEVNAME (dev_current), mode);
+	if (fd_current < 0) {
+		fprintf (stderr,
+			 "Can't open %s: %s\n",
+			 DEVNAME (dev_current), strerror (errno));
+		return -1;
+	}
+
+	if (mode == O_RDWR) {
 		if (HaveRedundEnv) {
-			/* change flag on current active env partition */
-			if (lseek (fd, DEVOFFSET (curdev) + sizeof (ulong), SEEK_SET)
-				== -1) {
-				fprintf (stderr, "seek error on %s: %s\n",
-					DEVNAME (curdev), strerror (errno));
-				return (-1);
-			}
-			if (write (fd, &obsolete_flag, sizeof (obsolete_flag)) !=
-				sizeof (obsolete_flag)) {
+			/* switch to next partition for writing */
+			dev_target = !dev_current;
+			/* dev_target: fd_target, erase_target */
+			fd_target = open (DEVNAME (dev_target), mode);
+			if (fd_target < 0) {
 				fprintf (stderr,
-					"Write error on %s: %s\n",
-					DEVNAME (curdev), strerror (errno));
-				return (-1);
+					 "Can't open %s: %s\n",
+					 DEVNAME (dev_target),
+					 strerror (errno));
+				rc = -1;
+				goto exit;
 			}
+		} else {
+			dev_target = dev_current;
+			fd_target = fd_current;
 		}
-		printf ("Done\n");
-		printf ("Locking ...\n");
-		erase.length = DEVESIZE (otherdev);
-		erase.start = DEVOFFSET (otherdev);
-		ioctl (fdr, MEMLOCK, &erase);
+
+		rc = flash_write (fd_current, fd_target, dev_target);
+
 		if (HaveRedundEnv) {
-			erase.length = DEVESIZE (curdev);
-			erase.start = DEVOFFSET (curdev);
-			ioctl (fd, MEMLOCK, &erase);
-			if (close (fdr)) {
+			if (close (fd_target)) {
 				fprintf (stderr,
 					"I/O error on %s: %s\n",
-					DEVNAME (otherdev),
+					DEVNAME (dev_target),
 					strerror (errno));
-				return (-1);
+				rc = -1;
 			}
 		}
-		printf ("Done\n");
 	} else {
-
-		if (lseek (fd, DEVOFFSET (curdev), SEEK_SET) == -1) {
-			fprintf (stderr,
-				"seek error on %s: %s\n",
-				DEVNAME (curdev), strerror (errno));
-			return (-1);
-		}
-		if (read (fd, &environment, len) != len) {
-			fprintf (stderr,
-				"CRC read error on %s: %s\n",
-				DEVNAME (curdev), strerror (errno));
-			return (-1);
-		}
-		if ((rc = read (fd, environment.data, ENV_SIZE)) != ENV_SIZE) {
-			fprintf (stderr,
-				"Read error on %s: %s\n",
-				DEVNAME (curdev), strerror (errno));
-			return (-1);
-		}
+		rc = flash_read (fd_current);
 	}
 
-	if (close (fd)) {
+exit:
+	if (close (fd_current)) {
 		fprintf (stderr,
-			"I/O error on %s: %s\n",
-			DEVNAME (curdev), strerror (errno));
-		return (-1);
+			 "I/O error on %s: %s\n",
+			 DEVNAME (dev_current), strerror (errno));
+		return -1;
 	}
 
-	/* everything ok */
-	return (0);
+	return rc;
 }
 
 /*
@@ -584,10 +871,10 @@ static char *envmatch (char * s1, char * s2)
 
 	while (*s1 == *s2++)
 		if (*s1++ == '=')
-			return (s2);
+			return s2;
 	if (*s1 == '\0' && *(s2 - 1) == '=')
-		return (s2);
-	return (NULL);
+		return s2;
+	return NULL;
 }
 
 /*
@@ -595,108 +882,156 @@ static char *envmatch (char * s1, char * s2)
  */
 static int env_init (void)
 {
+	int crc0, crc0_ok;
+	char flag0;
+	void *addr0;
+
 	int crc1, crc1_ok;
-	char *addr1;
+	char flag1;
+	void *addr1;
 
-	int crc2, crc2_ok;
-	char flag1, flag2, *addr2;
+	struct env_image_single *single;
+	struct env_image_redundant *redundant;
 
 	if (parse_config ())		/* should fill envdevices */
-		return 1;
+		return -1;
 
-	if ((addr1 = calloc (1, ENV_SIZE)) == NULL) {
+	addr0 = calloc (1, CONFIG_ENV_SIZE);
+	if (addr0 == NULL) {
 		fprintf (stderr,
 			"Not enough memory for environment (%ld bytes)\n",
-			ENV_SIZE);
-		return (errno);
+			CONFIG_ENV_SIZE);
+		return -1;
 	}
 
 	/* read environment from FLASH to local buffer */
-	environment.data = addr1;
-	curdev = 0;
-	if (flash_io (O_RDONLY)) {
-		return (errno);
+	environment.image = addr0;
+
+	if (HaveRedundEnv) {
+		redundant = addr0;
+		environment.crc		= &redundant->crc;
+		environment.flags	= &redundant->flags;
+		environment.data	= redundant->data;
+	} else {
+		single = addr0;
+		environment.crc		= &single->crc;
+		environment.flags	= NULL;
+		environment.data	= single->data;
 	}
 
-	crc1_ok = ((crc1 = crc32 (0, (uint8_t *) environment.data, ENV_SIZE))
-			   == environment.crc);
+	dev_current = 0;
+	if (flash_io (O_RDONLY))
+		return -1;
+
+	crc0 = crc32 (0, (uint8_t *) environment.data, ENV_SIZE);
+	crc0_ok = (crc0 == *environment.crc);
 	if (!HaveRedundEnv) {
-		if (!crc1_ok) {
+		if (!crc0_ok) {
 			fprintf (stderr,
 				"Warning: Bad CRC, using default environment\n");
 			memcpy(environment.data, default_environment, sizeof default_environment);
 		}
 	} else {
-		flag1 = environment.flags;
+		flag0 = *environment.flags;
 
-		curdev = 1;
-		if ((addr2 = calloc (1, ENV_SIZE)) == NULL) {
+		dev_current = 1;
+		addr1 = calloc (1, CONFIG_ENV_SIZE);
+		if (addr1 == NULL) {
 			fprintf (stderr,
 				"Not enough memory for environment (%ld bytes)\n",
-				ENV_SIZE);
-			return (errno);
+				CONFIG_ENV_SIZE);
+			return -1;
 		}
-		environment.data = addr2;
+		redundant = addr1;
 
-		if (flash_io (O_RDONLY)) {
-			return (errno);
+		/*
+		 * have to set environment.image for flash_read(), careful -
+		 * other pointers in environment still point inside addr0
+		 */
+		environment.image = addr1;
+		if (flash_io (O_RDONLY))
+			return -1;
+
+		/* Check flag scheme compatibility */
+		if (DEVTYPE(dev_current) == MTD_NORFLASH &&
+		    DEVTYPE(!dev_current) == MTD_NORFLASH) {
+			environment.flag_scheme = FLAG_BOOLEAN;
+		} else if (DEVTYPE(dev_current) == MTD_NANDFLASH &&
+			   DEVTYPE(!dev_current) == MTD_NANDFLASH) {
+			environment.flag_scheme = FLAG_INCREMENTAL;
+		} else {
+			fprintf (stderr, "Incompatible flash types!\n");
+			return -1;
 		}
 
-		crc2_ok = ((crc2 = crc32 (0, (uint8_t *) environment.data, ENV_SIZE))
-				   == environment.crc);
-		flag2 = environment.flags;
-
-		if (crc1_ok && !crc2_ok) {
-			environment.data = addr1;
-			environment.flags = flag1;
-			environment.crc = crc1;
-			curdev = 0;
-			free (addr2);
-		} else if (!crc1_ok && crc2_ok) {
-			environment.data = addr2;
-			environment.flags = flag2;
-			environment.crc = crc2;
-			curdev = 1;
-			free (addr1);
-		} else if (!crc1_ok && !crc2_ok) {
+		crc1 = crc32 (0, (uint8_t *) redundant->data, ENV_SIZE);
+		crc1_ok = (crc1 == redundant->crc);
+		flag1 = redundant->flags;
+
+		if (crc0_ok && !crc1_ok) {
+			dev_current = 0;
+		} else if (!crc0_ok && crc1_ok) {
+			dev_current = 1;
+		} else if (!crc0_ok && !crc1_ok) {
 			fprintf (stderr,
 				"Warning: Bad CRC, using default environment\n");
-			memcpy(environment.data, default_environment, sizeof default_environment);
-			curdev = 0;
-			free (addr1);
-		} else if (flag1 == active_flag && flag2 == obsolete_flag) {
-			environment.data = addr1;
-			environment.flags = flag1;
-			environment.crc = crc1;
-			curdev = 0;
-			free (addr2);
-		} else if (flag1 == obsolete_flag && flag2 == active_flag) {
-			environment.data = addr2;
-			environment.flags = flag2;
-			environment.crc = crc2;
-			curdev = 1;
-			free (addr1);
-		} else if (flag1 == flag2) {
-			environment.data = addr1;
-			environment.flags = flag1;
-			environment.crc = crc1;
-			curdev = 0;
-			free (addr2);
-		} else if (flag1 == 0xFF) {
-			environment.data = addr1;
-			environment.flags = flag1;
-			environment.crc = crc1;
-			curdev = 0;
-			free (addr2);
-		} else if (flag2 == 0xFF) {
-			environment.data = addr2;
-			environment.flags = flag2;
-			environment.crc = crc2;
-			curdev = 1;
+			memcpy (environment.data, default_environment,
+				sizeof default_environment);
+			dev_current = 0;
+		} else {
+			switch (environment.flag_scheme) {
+			case FLAG_BOOLEAN:
+				if (flag0 == active_flag &&
+				    flag1 == obsolete_flag) {
+					dev_current = 0;
+				} else if (flag0 == obsolete_flag &&
+					   flag1 == active_flag) {
+					dev_current = 1;
+				} else if (flag0 == flag1) {
+					dev_current = 0;
+				} else if (flag0 == 0xFF) {
+					dev_current = 0;
+				} else if (flag1 == 0xFF) {
+					dev_current = 1;
+				} else {
+					dev_current = 0;
+				}
+				break;
+			case FLAG_INCREMENTAL:
+				if ((flag0 == 255 && flag1 == 0) ||
+				    flag1 > flag0)
+					dev_current = 1;
+				else if ((flag1 == 255 && flag0 == 0) ||
+					 flag0 > flag1)
+					dev_current = 0;
+				else /* flags are equal - almost impossible */
+					dev_current = 0;
+				break;
+			default:
+				fprintf (stderr, "Unknown flag scheme %u \n",
+					 environment.flag_scheme);
+				return -1;
+			}
+		}
+
+		/*
+		 * If we are reading, we don't need the flag and the CRC any
+		 * more, if we are writing, we will re-calculate CRC and update
+		 * flags before writing out
+		 */
+		if (dev_current) {
+			environment.image	= addr1;
+			environment.crc		= &redundant->crc;
+			environment.flags	= &redundant->flags;
+			environment.data	= redundant->data;
+			free (addr0);
+		} else {
+			environment.image	= addr0;
+			/* Other pointers are already set */
 			free (addr1);
 		}
 	}
-	return (0);
+	return 0;
 }
 
 
@@ -709,18 +1044,20 @@ static int parse_config ()
 	if (get_config (CONFIG_FILE)) {
 		fprintf (stderr,
 			"Cannot parse config file: %s\n", strerror (errno));
-		return 1;
+		return -1;
 	}
 #else
 	strcpy (DEVNAME (0), DEVICE1_NAME);
 	DEVOFFSET (0) = DEVICE1_OFFSET;
 	ENVSIZE (0) = ENV1_SIZE;
 	DEVESIZE (0) = DEVICE1_ESIZE;
+	ENVSECTORS (0) = DEVICE1_ENVSECTORS;
 #ifdef HAVE_REDUND
 	strcpy (DEVNAME (1), DEVICE2_NAME);
 	DEVOFFSET (1) = DEVICE2_OFFSET;
 	ENVSIZE (1) = ENV2_SIZE;
 	DEVESIZE (1) = DEVICE2_ESIZE;
+	ENVSECTORS (1) = DEVICE2_ENVSECTORS;
 	HaveRedundEnv = 1;
 #endif
 #endif
@@ -728,14 +1065,14 @@ static int parse_config ()
 		fprintf (stderr,
 			"Cannot access MTD device %s: %s\n",
 			DEVNAME (0), strerror (errno));
-		return 1;
+		return -1;
 	}
 
 	if (HaveRedundEnv && stat (DEVNAME (1), &st)) {
 		fprintf (stderr,
 			"Cannot access MTD device %s: %s\n",
 			DEVNAME (1), strerror (errno));
-		return 1;
+		return -1;
 	}
 	return 0;
 }
@@ -748,21 +1085,28 @@ static int get_config (char *fname)
 	int rc;
 	char dump[128];
 
-	if ((fp = fopen (fname, "r")) == NULL) {
-		return 1;
-	}
-
-	while ((i < 2) && ((rc = fscanf (fp, "%s %lx %lx %lx",
-				  DEVNAME (i),
-				  &DEVOFFSET (i),
-				  &ENVSIZE (i),
-				  &DEVESIZE (i)  )) != EOF)) {
+	fp = fopen (fname, "r");
+	if (fp == NULL)
+		return -1;
 
+	while (i < 2 && fgets (dump, sizeof (dump), fp)) {
 		/* Skip incomplete conversions and comment strings */
-		if ((rc < 3) || (*DEVNAME (i) == '#')) {
-			fgets (dump, sizeof (dump), fp);	/* Consume till end */
+		if (dump[0] == '#')
 			continue;
-		}
+
+		rc = sscanf (dump, "%s %lx %lx %lx %lx",
+			     DEVNAME (i),
+			     &DEVOFFSET (i),
+			     &ENVSIZE (i),
+			     &DEVESIZE (i),
+			     &ENVSECTORS (i));
+
+		if (rc < 4)
+			continue;
+
+		if (rc < 5)
+			/* Default - 1 sector */
+			ENVSECTORS (i) = 1;
 
 		i++;
 	}
@@ -771,7 +1115,7 @@ static int get_config (char *fname)
 	HaveRedundEnv = i - 1;
 	if (!i) {			/* No valid entries found */
 		errno = EINVAL;
-		return 1;
+		return -1;
 	} else
 		return 0;
 }
diff --git a/tools/env/fw_env.config b/tools/env/fw_env.config
index 2432bd866..c8f12cf0a 100644
--- a/tools/env/fw_env.config
+++ b/tools/env/fw_env.config
@@ -1,7 +1,11 @@
 # Configuration file for fw_(printenv/saveenv) utility.
-# Up to two entries are valid, in this case the redundand
+# Up to two entries are valid, in this case the redundant
 # environment sector is assumed present.
+# Notice, that the "Number of sectors" is ignored on NOR.
 
-# MTD device name	Device offset	Env. size	Flash sector size
+# MTD device name	Device offset	Env. size	Flash sector size	Number of sectors
 /dev/mtd1		0x0000		0x4000		0x4000
 /dev/mtd2		0x0000		0x4000		0x4000
+
+# NAND example
+#/dev/mtd0		0x4000		0x4000		0x20000			2
diff --git a/tools/envcrc.c b/tools/envcrc.c
index 550cf82d1..4334cdf74 100644
--- a/tools/envcrc.c
+++ b/tools/envcrc.c
@@ -33,38 +33,38 @@
 #include <config.h>
 #undef	__ASSEMBLY__
 
-#if defined(CFG_ENV_IS_IN_FLASH)
-# ifndef  CFG_ENV_ADDR
-#  define CFG_ENV_ADDR	(CFG_FLASH_BASE + CFG_ENV_OFFSET)
+#if defined(CONFIG_ENV_IS_IN_FLASH)
+# ifndef  CONFIG_ENV_ADDR
+#  define CONFIG_ENV_ADDR	(CONFIG_SYS_FLASH_BASE + CONFIG_ENV_OFFSET)
 # endif
-# ifndef  CFG_ENV_OFFSET
-#  define CFG_ENV_OFFSET (CFG_ENV_ADDR - CFG_FLASH_BASE)
+# ifndef  CONFIG_ENV_OFFSET
+#  define CONFIG_ENV_OFFSET (CONFIG_ENV_ADDR - CONFIG_SYS_FLASH_BASE)
 # endif
-# if !defined(CFG_ENV_ADDR_REDUND) && defined(CFG_ENV_OFFSET_REDUND)
-#  define CFG_ENV_ADDR_REDUND	(CFG_FLASH_BASE + CFG_ENV_OFFSET_REDUND)
+# if !defined(CONFIG_ENV_ADDR_REDUND) && defined(CONFIG_ENV_OFFSET_REDUND)
+#  define CONFIG_ENV_ADDR_REDUND	(CONFIG_SYS_FLASH_BASE + CONFIG_ENV_OFFSET_REDUND)
 # endif
-# ifndef  CFG_ENV_SIZE
-#  define CFG_ENV_SIZE	CFG_ENV_SECT_SIZE
+# ifndef  CONFIG_ENV_SIZE
+#  define CONFIG_ENV_SIZE	CONFIG_ENV_SECT_SIZE
 # endif
-# if defined(CFG_ENV_ADDR_REDUND) && !defined(CFG_ENV_SIZE_REDUND)
-#  define CFG_ENV_SIZE_REDUND	CFG_ENV_SIZE
+# if defined(CONFIG_ENV_ADDR_REDUND) && !defined(CONFIG_ENV_SIZE_REDUND)
+#  define CONFIG_ENV_SIZE_REDUND	CONFIG_ENV_SIZE
 # endif
-# if (CFG_ENV_ADDR >= CFG_MONITOR_BASE) && \
-     ((CFG_ENV_ADDR + CFG_ENV_SIZE) <= (CFG_MONITOR_BASE + CFG_MONITOR_LEN))
+# if (CONFIG_ENV_ADDR >= CONFIG_SYS_MONITOR_BASE) && \
+     ((CONFIG_ENV_ADDR + CONFIG_ENV_SIZE) <= (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN))
 #  define ENV_IS_EMBEDDED	1
 # endif
-# if defined(CFG_ENV_ADDR_REDUND) || defined(CFG_ENV_OFFSET_REDUND)
-#  define CFG_REDUNDAND_ENVIRONMENT	1
+# if defined(CONFIG_ENV_ADDR_REDUND) || defined(CONFIG_ENV_OFFSET_REDUND)
+#  define CONFIG_SYS_REDUNDAND_ENVIRONMENT	1
 # endif
-#endif	/* CFG_ENV_IS_IN_FLASH */
+#endif	/* CONFIG_ENV_IS_IN_FLASH */
 
-#ifdef CFG_REDUNDAND_ENVIRONMENT
+#ifdef CONFIG_SYS_REDUNDAND_ENVIRONMENT
 # define ENV_HEADER_SIZE	(sizeof(uint32_t) + 1)
 #else
 # define ENV_HEADER_SIZE	(sizeof(uint32_t))
 #endif
 
-#define ENV_SIZE (CFG_ENV_SIZE - ENV_HEADER_SIZE)
+#define ENV_SIZE (CONFIG_ENV_SIZE - ENV_HEADER_SIZE)
 
 
 extern uint32_t crc32 (uint32_t, const unsigned char *, unsigned int);
diff --git a/tools/netconsole b/tools/netconsole
new file mode 100755
index 000000000..09c898168
--- /dev/null
+++ b/tools/netconsole
@@ -0,0 +1,42 @@
+#!/bin/sh
+
+usage() {
+	(
+	echo "Usage: $0 <board IP> [board port]"
+	echo ""
+	echo "If port is not specified, '6666' will be used"
+	[ -z "$*" ] && exit 0
+	echo ""
+	echo "ERROR: $*"
+	exit 1
+	) 1>&2
+	exit $?
+}
+
+while [ -n "$1" ] ; do
+	case $1 in
+		-h|--help) usage;;
+		--)        break;;
+		-*)        usage "Invalid option $1";;
+		*)         break;;
+	esac
+	shift
+done
+
+ip=$1
+port=${2:-6666}
+
+if [ -z "${ip}" ] || [ -n "$3" ] ; then
+	usage "Invalid number of arguments"
+fi
+
+for nc in netcat nc ; do
+	type ${nc} >/dev/null && break
+done
+
+trap "stty icanon echo intr ^C" 0 2 3 5 10 13 15
+echo "NOTE: the interrupt signal (normally ^C) has been remapped to ^T"
+
+stty -icanon -echo intr ^T
+${nc} -u -l -p ${port} < /dev/null &
+exec ${nc} -u ${ip} ${port}
diff --git a/tools/updater/cmd_flash.c b/tools/updater/cmd_flash.c
index 0f6f62b94..5ff733659 100644
--- a/tools/updater/cmd_flash.c
+++ b/tools/updater/cmd_flash.c
@@ -64,7 +64,7 @@ abbrev_spec(char *str, flash_info_t **pinfo, int *psf, int *psl)
 
     bank = simple_strtoul(str, &ep, 10);
     if (ep == str || *ep != '\0' ||
-      bank < 1 || bank > CFG_MAX_FLASH_BANKS ||
+      bank < 1 || bank > CONFIG_SYS_MAX_FLASH_BANKS ||
       (fp = &flash_info[bank - 1])->flash_id == FLASH_UNKNOWN)
 	return -1;
 
@@ -96,7 +96,7 @@ int do_flinfo (cmd_tbl_t *cmdtp, bd_t *bd, int flag, int argc, char *argv[])
 	ulong bank;
 
 	if (argc == 1) {	/* print info for all FLASH banks */
-		for (bank=0; bank <CFG_MAX_FLASH_BANKS; ++bank) {
+		for (bank=0; bank <CONFIG_SYS_MAX_FLASH_BANKS; ++bank) {
 			printf ("\nBank # %ld: ", bank+1);
 
 			flash_print_info (&flash_info[bank]);
@@ -105,9 +105,9 @@ int do_flinfo (cmd_tbl_t *cmdtp, bd_t *bd, int flag, int argc, char *argv[])
 	}
 
 	bank = simple_strtoul(argv[1], NULL, 16);
-	if ((bank < 1) || (bank > CFG_MAX_FLASH_BANKS)) {
+	if ((bank < 1) || (bank > CONFIG_SYS_MAX_FLASH_BANKS)) {
 		printf ("Only FLASH Banks # 1 ... # %d supported\n",
-			CFG_MAX_FLASH_BANKS);
+			CONFIG_SYS_MAX_FLASH_BANKS);
 		return 1;
 	}
 	printf ("\nBank # %ld: ", bank);
@@ -127,7 +127,7 @@ int do_flerase(cmd_tbl_t *cmdtp, bd_t *bd, int flag, int argc, char *argv[])
 	}
 
 	if (strcmp(argv[1], "all") == 0) {
-		for (bank=1; bank<=CFG_MAX_FLASH_BANKS; ++bank) {
+		for (bank=1; bank<=CONFIG_SYS_MAX_FLASH_BANKS; ++bank) {
 			printf ("Erase Flash Bank # %ld ", bank);
 			info = &flash_info[bank-1];
 			rcode = flash_erase (info, 0, info->sector_count-1);
@@ -153,9 +153,9 @@ int do_flerase(cmd_tbl_t *cmdtp, bd_t *bd, int flag, int argc, char *argv[])
 
 	if (strcmp(argv[1], "bank") == 0) {
 		bank = simple_strtoul(argv[2], NULL, 16);
-		if ((bank < 1) || (bank > CFG_MAX_FLASH_BANKS)) {
+		if ((bank < 1) || (bank > CONFIG_SYS_MAX_FLASH_BANKS)) {
 			printf ("Only FLASH Banks # 1 ... # %d supported\n",
-				CFG_MAX_FLASH_BANKS);
+				CONFIG_SYS_MAX_FLASH_BANKS);
 			return 1;
 		}
 		printf ("Erase Flash Bank # %ld ", bank);
@@ -187,7 +187,7 @@ int flash_sect_erase (ulong addr_first, ulong addr_last)
 
 	erased = 0;
 
-	for (bank=0,info = &flash_info[0]; bank < CFG_MAX_FLASH_BANKS; ++bank, ++info) {
+	for (bank=0,info = &flash_info[0]; bank < CONFIG_SYS_MAX_FLASH_BANKS; ++bank, ++info) {
 		ulong b_end;
 		int sect;
 
@@ -258,7 +258,7 @@ int do_protect(cmd_tbl_t *cmdtp, bd_t *bd, int flag, int argc, char *argv[])
 	}
 
 	if (strcmp(argv[2], "all") == 0) {
-		for (bank=1; bank<=CFG_MAX_FLASH_BANKS; ++bank) {
+		for (bank=1; bank<=CONFIG_SYS_MAX_FLASH_BANKS; ++bank) {
 			info = &flash_info[bank-1];
 			if (info->flash_id == FLASH_UNKNOWN) {
 				continue;
@@ -267,19 +267,19 @@ int do_protect(cmd_tbl_t *cmdtp, bd_t *bd, int flag, int argc, char *argv[])
 			/*	p ? "" : "Un-", bank); */
 
 			for (i=0; i<info->sector_count; ++i) {
-#if defined(CFG_FLASH_PROTECTION)
+#if defined(CONFIG_SYS_FLASH_PROTECTION)
 				if (flash_real_protect(info, i, p))
 					rcode = 1;
 				putc ('.');
 #else
 				info->protect[i] = p;
-#endif	/* CFG_FLASH_PROTECTION */
+#endif	/* CONFIG_SYS_FLASH_PROTECTION */
 			}
 		}
 
-#if defined(CFG_FLASH_PROTECTION)
+#if defined(CONFIG_SYS_FLASH_PROTECTION)
 		if (!rcode) puts (" done\n");
-#endif	/* CFG_FLASH_PROTECTION */
+#endif	/* CONFIG_SYS_FLASH_PROTECTION */
 
 		return rcode;
 	}
@@ -293,18 +293,18 @@ int do_protect(cmd_tbl_t *cmdtp, bd_t *bd, int flag, int argc, char *argv[])
 		/*	p ? "" : "Un-", sect_first, sect_last, */
 		/*	(info-flash_info)+1); */
 		for (i = sect_first; i <= sect_last; i++) {
-#if defined(CFG_FLASH_PROTECTION)
+#if defined(CONFIG_SYS_FLASH_PROTECTION)
 			if (flash_real_protect(info, i, p))
 				rcode =  1;
 			putc ('.');
 #else
 			info->protect[i] = p;
-#endif	/* CFG_FLASH_PROTECTION */
+#endif	/* CONFIG_SYS_FLASH_PROTECTION */
 		}
 
-#if defined(CFG_FLASH_PROTECTION)
+#if defined(CONFIG_SYS_FLASH_PROTECTION)
 		if (!rcode) puts (" done\n");
-#endif	/* CFG_FLASH_PROTECTION */
+#endif	/* CONFIG_SYS_FLASH_PROTECTION */
 
 		return rcode;
 	}
@@ -316,9 +316,9 @@ int do_protect(cmd_tbl_t *cmdtp, bd_t *bd, int flag, int argc, char *argv[])
 
 	if (strcmp(argv[2], "bank") == 0) {
 		bank = simple_strtoul(argv[3], NULL, 16);
-		if ((bank < 1) || (bank > CFG_MAX_FLASH_BANKS)) {
+		if ((bank < 1) || (bank > CONFIG_SYS_MAX_FLASH_BANKS)) {
 			printf ("Only FLASH Banks # 1 ... # %d supported\n",
-				CFG_MAX_FLASH_BANKS);
+				CONFIG_SYS_MAX_FLASH_BANKS);
 			return 1;
 		}
 		printf ("%sProtect Flash Bank # %ld\n",
@@ -330,18 +330,18 @@ int do_protect(cmd_tbl_t *cmdtp, bd_t *bd, int flag, int argc, char *argv[])
 			return 1;
 		}
 		for (i=0; i<info->sector_count; ++i) {
-#if defined(CFG_FLASH_PROTECTION)
+#if defined(CONFIG_SYS_FLASH_PROTECTION)
 			if (flash_real_protect(info, i, p))
 				rcode =  1;
 			putc ('.');
 #else
 			info->protect[i] = p;
-#endif	/* CFG_FLASH_PROTECTION */
+#endif	/* CONFIG_SYS_FLASH_PROTECTION */
 		}
 
-#if defined(CFG_FLASH_PROTECTION)
+#if defined(CONFIG_SYS_FLASH_PROTECTION)
 		if (!rcode) puts (" done\n");
-#endif	/* CFG_FLASH_PROTECTION */
+#endif	/* CONFIG_SYS_FLASH_PROTECTION */
 
 		return rcode;
 	}
@@ -366,7 +366,7 @@ int flash_sect_protect (int p, ulong addr_first, ulong addr_last)
 
 	protected = 0;
 
-	for (bank=0,info = &flash_info[0]; bank < CFG_MAX_FLASH_BANKS; ++bank, ++info) {
+	for (bank=0,info = &flash_info[0]; bank < CONFIG_SYS_MAX_FLASH_BANKS; ++bank, ++info) {
 		ulong b_end;
 		int sect;
 
@@ -402,18 +402,18 @@ int flash_sect_protect (int p, ulong addr_first, ulong addr_last)
 		if (s_first>=0 && s_first<=s_last) {
 			protected += s_last - s_first + 1;
 			for (i=s_first; i<=s_last; ++i) {
-#if defined(CFG_FLASH_PROTECTION)
+#if defined(CONFIG_SYS_FLASH_PROTECTION)
 				if (flash_real_protect(info, i, p))
 					rcode = 1;
 				putc ('.');
 #else
 				info->protect[i] = p;
-#endif	/* CFG_FLASH_PROTECTION */
+#endif	/* CONFIG_SYS_FLASH_PROTECTION */
 			}
 		}
-#if defined(CFG_FLASH_PROTECTION)
+#if defined(CONFIG_SYS_FLASH_PROTECTION)
 		if (!rcode) putc ('\n');
-#endif	/* CFG_FLASH_PROTECTION */
+#endif	/* CONFIG_SYS_FLASH_PROTECTION */
 
 	}
 	if (protected) {
diff --git a/tools/updater/flash.c b/tools/updater/flash.c
index a73159ff9..5be5f1b09 100644
--- a/tools/updater/flash.c
+++ b/tools/updater/flash.c
@@ -66,18 +66,18 @@ flash_protect (int flag, ulong from, ulong to, flash_info_t *info)
 		 */
 		if (from <= end && to >= info->start[i]) {
 			if (flag & FLAG_PROTECT_CLEAR) {
-#if defined(CFG_FLASH_PROTECTION)
+#if defined(CONFIG_SYS_FLASH_PROTECTION)
 				flash_real_protect(info, i, 0);
 #else
 				info->protect[i] = 0;
-#endif	/* CFG_FLASH_PROTECTION */
+#endif	/* CONFIG_SYS_FLASH_PROTECTION */
 			}
 			else if (flag & FLAG_PROTECT_SET) {
-#if defined(CFG_FLASH_PROTECTION)
+#if defined(CONFIG_SYS_FLASH_PROTECTION)
 				flash_real_protect(info, i, 1);
 #else
 				info->protect[i] = 1;
-#endif	/* CFG_FLASH_PROTECTION */
+#endif	/* CONFIG_SYS_FLASH_PROTECTION */
 			}
 		}
 	}
@@ -93,7 +93,7 @@ addr2info (ulong addr)
 	flash_info_t *info;
 	int i;
 
-	for (i=0, info = &flash_info[0]; i<CFG_MAX_FLASH_BANKS; ++i, ++info) {
+	for (i=0, info = &flash_info[0]; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i, ++info) {
 		if (info->flash_id != FLASH_UNKNOWN &&
 		    addr >= info->start[0] &&
 		    /* WARNING - The '- 1' is needed if the flash
diff --git a/tools/updater/flash_hw.c b/tools/updater/flash_hw.c
index 2d9b8c880..8af4b454e 100644
--- a/tools/updater/flash_hw.c
+++ b/tools/updater/flash_hw.c
@@ -80,7 +80,7 @@ unsigned long flash_init_old(void)
 {
     int i;
 
-    for (i = 0; i < CFG_MAX_FLASH_BANKS; i++)
+    for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++)
     {
 	flash_info[i].flash_id = FLASH_UNKNOWN;
 	flash_info[i].sector_count = 0;
@@ -101,33 +101,33 @@ unsigned long flash_init (void)
 	flash_to_xd();
 
 	/* Init: no FLASHes known */
-	for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) {
+	for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
 		flash_info[i].flash_id = FLASH_UNKNOWN;
 		flash_info[i].sector_count = 0;
 		flash_info[i].size = 0;
 	}
 
-	DEBUGF("\n## Get flash size @ 0x%08x\n", CFG_FLASH_BASE);
+	DEBUGF("\n## Get flash size @ 0x%08x\n", CONFIG_SYS_FLASH_BASE);
 
-	flash_size = flash_get_size (CFG_FLASH_BASE, flash_info);
+	flash_size = flash_get_size (CONFIG_SYS_FLASH_BASE, flash_info);
 
 	DEBUGF("## Flash bank size: %08lx\n", flash_size);
 
 	if (flash_size) {
-#if CFG_MONITOR_BASE >= CFG_FLASH_BASE && \
-    CFG_MONITOR_BASE < CFG_FLASH_BASE + CFG_FLASH_MAX_SIZE
+#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE && \
+    CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE + CONFIG_SYS_FLASH_MAX_SIZE
 		/* monitor protection ON by default */
 		flash_protect(FLAG_PROTECT_SET,
-			      CFG_MONITOR_BASE,
-			      CFG_MONITOR_BASE + CFG_MONITOR_LEN - 1,
+			      CONFIG_SYS_MONITOR_BASE,
+			      CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN - 1,
 			      &flash_info[0]);
 #endif
 
-#ifdef CFG_ENV_IS_IN_FLASH
+#ifdef CONFIG_ENV_IS_IN_FLASH
 		/* ENV protection ON by default */
 		flash_protect(FLAG_PROTECT_SET,
-			      CFG_ENV_ADDR,
-			      CFG_ENV_ADDR + CFG_ENV_SECT_SIZE - 1,
+			      CONFIG_ENV_ADDR,
+			      CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE - 1,
 			      &flash_info[0]);
 #endif
 
@@ -286,10 +286,10 @@ static ulong flash_get_size (ulong addr, flash_info_t *info)
 
 	}
 
-	if (info->sector_count > CFG_MAX_FLASH_SECT) {
+	if (info->sector_count > CONFIG_SYS_MAX_FLASH_SECT) {
 		printf ("** ERROR: sector count %d > max (%d) **\n",
-			info->sector_count, CFG_MAX_FLASH_SECT);
-		info->sector_count = CFG_MAX_FLASH_SECT;
+			info->sector_count, CONFIG_SYS_MAX_FLASH_SECT);
+		info->sector_count = CONFIG_SYS_MAX_FLASH_SECT;
 	}
 
 	if (! flash_get_offsets (addr, info)) {
@@ -418,10 +418,10 @@ int flash_erase (flash_info_t *info, int s_first, int s_last)
 	last  = start;
 	addr = info->start[l_sect];
 
-	DEBUGF ("Start erase timeout: %d\n", CFG_FLASH_ERASE_TOUT);
+	DEBUGF ("Start erase timeout: %d\n", CONFIG_SYS_FLASH_ERASE_TOUT);
 
 	while ((in8(addr) & 0x80) != 0x80) {
-		if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+		if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
 			printf ("Timeout\n");
 			flash_reset (info->start[0]);
 			flash_to_mem();
@@ -570,7 +570,7 @@ static int write_word (flash_info_t *info, ulong dest, ulong data)
 		/* data polling for D7 */
 		start = get_timer (0);
 		while ((in8(dest+i) & 0x80) != (data_ch[i] & 0x80)) {
-			if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+			if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
 				flash_reset (addr);
 				flash_to_mem();
 				return (1);
diff --git a/tools/updater/utils.c b/tools/updater/utils.c
index 0304f94c1..61a611876 100644
--- a/tools/updater/utils.c
+++ b/tools/updater/utils.c
@@ -132,16 +132,16 @@ do_reset (void)
 	__asm__ __volatile__ ("isync");
 	__asm__ __volatile__ ("sync");
 
-#ifdef CFG_RESET_ADDRESS
-	addr = CFG_RESET_ADDRESS;
+#ifdef CONFIG_SYS_RESET_ADDRESS
+	addr = CONFIG_SYS_RESET_ADDRESS;
 #else
 	/*
-	 * note: when CFG_MONITOR_BASE points to a RAM address,
-	 * CFG_MONITOR_BASE - sizeof (ulong) is usually a valid
+	 * note: when CONFIG_SYS_MONITOR_BASE points to a RAM address,
+	 * CONFIG_SYS_MONITOR_BASE - sizeof (ulong) is usually a valid
 	 * address. Better pick an address known to be invalid on your
-	 * system and assign it to CFG_RESET_ADDRESS.
+	 * system and assign it to CONFIG_SYS_RESET_ADDRESS.
 	 */
-	addr = CFG_MONITOR_BASE - sizeof (ulong);
+	addr = CONFIG_SYS_MONITOR_BASE - sizeof (ulong);
 #endif
 	soft_restart(addr);
 	while(1);       /* not reached */